sfrench/cifs-2.6.git
4 years agoMerge tag 'pstore-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees...
Linus Torvalds [Sat, 6 Aug 2016 03:52:52 +0000 (23:52 -0400)]
Merge tag 'pstore-v4.8-rc1' of git://git./linux/kernel/git/kees/linux

Pull pstore fixes from Kees Cook:
 "Fixes for pstore ramoops driver to catch bad kfree() and to use better
  DT bindings"

* tag 'pstore-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  ramoops: use persistent_ram_free() instead of kfree() for freeing prz
  ramoops: use DT reserved-memory bindings

4 years agoMerge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sat, 6 Aug 2016 03:47:27 +0000 (23:47 -0400)]
Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is seven basic fixes (plus one MAINTAINER update) which came in
  close to the merge window"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  ipr: Fix error return code in ipr_probe_ioa()
  fcoe: add missing destroy_workqueue() on error in fcoe_init()
  lpfc: Fix possible NULL pointer dereference
  fcoe: Use default VLAN for FIP VLAN discovery
  ipr: Wait to do async scan until scsi host is initialized
  MAINTAINERS: Update cxlflash maintainers
  cxlflash: Verify problem state area is mapped before notifying shutdown
  lpfc: fix oops in lpfc_sli4_scmd_to_wqidx_distr() from lpfc_send_taskmgmt()

4 years agoMerge tag 'dm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device...
Linus Torvalds [Sat, 6 Aug 2016 03:41:52 +0000 (23:41 -0400)]
Merge tag 'dm-4.8-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - a stable dm-flakey fix to error read IO during the 'down_interval'

 - a DM core suspend fix to establish the SUSPENDED flag before dropping
   the SUSPENDING flag

 - a blk-mq request-based DM (dm-mq) dm_stop_queue() fix to properly
   stop the blk-mq hw_queues (and cancel pending requeue work); also
   set/clear QUEUE_FLAG_STOPPED when stopping/starting the dm-mq
   request_queue.

 - a DM multipath fix to harden locking of in-core state flags in the
   face of concurrent access while handling path failures under heavy
   IO.

 - a few small DM raid fixes to edge cases caught with further testing.

* tag 'dm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm raid: fix use of wrong status char during resynchronization
  dm raid: constructor fails on non-zero incompat_features
  dm raid: fix processing of max_recovery_rate constructor flag
  dm: set DMF_SUSPENDED* _before_ clearing DMF_NOFLUSH_SUSPENDING
  dm rq: fix the starting and stopping of blk-mq queues
  dm mpath: add locking to multipath_resume and must_push_back
  dm flakey: error READ bios during the down_interval

4 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 6 Aug 2016 03:31:51 +0000 (23:31 -0400)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Here's the second round of block updates for this merge window.

  It's a mix of fixes for changes that went in previously in this round,
  and fixes in general.  This pull request contains:

   - Fixes for loop from Christoph

   - A bdi vs gendisk lifetime fix from Dan, worth two cookies.

   - A blk-mq timeout fix, when on frozen queues.  From Gabriel.

   - Writeback fix from Jan, ensuring that __writeback_single_inode()
     does the right thing.

   - Fix for bio->bi_rw usage in f2fs from me.

   - Error path deadlock fix in blk-mq sysfs registration from me.

   - Floppy O_ACCMODE fix from Jiri.

   - Fix to the new bio op methods from Mike.

     One more followup will be coming here, ensuring that we don't
     propagate the block types outside of block.  That, and a rename of
     bio->bi_rw is coming right after -rc1 is cut.

   - Various little fixes"

* 'for-linus' of git://git.kernel.dk/linux-block:
  mm/block: convert rw_page users to bio op use
  loop: make do_req_filebacked more robust
  loop: don't try to use AIO for discards
  blk-mq: fix deadlock in blk_mq_register_disk() error path
  Include: blkdev: Removed duplicate 'struct request;' declaration.
  Fixup direct bi_rw modifiers
  block: fix bdi vs gendisk lifetime mismatch
  blk-mq: Allow timeouts to run while queue is freezing
  nbd: fix race in ioctl
  block: fix use-after-free in seq file
  f2fs: drop bio->bi_rw manual assignment
  block: add missing group association in bio-cloning functions
  blkcg: kill unused field nr_undestroyed_grps
  writeback: Write dirty times for WB_SYNC_ALL writeback
  floppy: fix open(O_ACCMODE) for ioctl-only open

4 years agoMerge tag 'pnp-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Sat, 6 Aug 2016 03:30:52 +0000 (23:30 -0400)]
Merge tag 'pnp-extra-4.8-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull PNP fix from Rafael Wysocki:
 "This fixes build errors due to a missing header file inclusion in
  drivers/pnp/pnpbios/core.c (Randy Dunlap)"

* tag 'pnp-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: pnpbios: add header file to fix build errors

4 years agoMerge tag 'acpi-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafae...
Linus Torvalds [Sat, 6 Aug 2016 03:29:05 +0000 (23:29 -0400)]
Merge tag 'acpi-extra-4.8-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull more ACPI updates from Rafael Wysocki:
 "Two more fixes in ACPI drivers, one in the ACPI EC driver
  (stable-candidate) and one in the ACPI button driver.

  Specifics:

   - An ACPI EC driver fix from the 4.3 cycle may cause the ACPICA's
     method reentrancy limit to be exceeded for a _Qxx method due to a
     large number of concurrent EC operations, so prevent that from
     happening by moving the EC handling into a separate workqueue with
     a limit on the number of concurrently executed work items (Lv
     Zheng)

   - Fix the cleanup code in the ACPI button driver that forgets to
     clear two variables on exit which causes an error to occur on the
     next attmpt to load the driver (Benjamin Tissoires)"

* tag 'acpi-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx
  ACPI / button: remove pointer to old lid_sysfs on unbind

4 years agoMerge tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Sat, 6 Aug 2016 03:26:16 +0000 (23:26 -0400)]
Merge tag 'pm-extra-4.8-rc1' of git://git./linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "A few more fixes and cleanups in the x86-64 low-level hibernation
  code, PM core, cpufreq (Kconfig and intel_pstate), and the operating
  points framework.

  Specifics:

   - Prevent the low-level assembly hibernate code on x86-64 from
     referring to __PAGE_OFFSET directly as a symbol which doesn't work
     when the kernel identity mapping base is randomized, in which case
     __PAGE_OFFSET is a variable (Rafael Wysocki).

   - Avoid selecting CPU_FREQ_STAT by default as the statistics are not
     required for proper cpufreq operation (Borislav Petkov).

   - Add Skylake-X and Broadwell-X IDs to the intel_pstate's list of
     processors where out-of-band (OBB) control of P-states is possible
     and if that is in use, intel_pstate should not attempt to manage
     P-states (Srinivas Pandruvada).

   - Drop some unnecessary checks from the wakeup IRQ handling code in
     the PM core (Markus Elfring).

   - Reduce the number operating performance point (OPP) lookups in one
     of the OPP framework's helper functions (Jisheng Zhang)"

* tag 'pm-extra-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  x86/power/64: Do not refer to __PAGE_OFFSET from assembly code
  cpufreq: Do not default-yes CPU_FREQ_STAT
  cpufreq: intel_pstate: Add more out-of-band IDs
  PM / OPP: optimize dev_pm_opp_set_rate() performance a bit
  PM-wakeup: Delete unnecessary checks before three function calls

4 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 6 Aug 2016 03:24:15 +0000 (23:24 -0400)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:
 "Two new drivers for touchscreen controllers:

   - Silead touchscreen controllers
   - SiS 9200 family touchscreen controllers

  and a few driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: silead - remove some dead code
  Input: sis-i2c - select CONFIG_CRC_ITU_T
  Input: add driver for SiS 9200 family I2C touchscreen controllers
  Input: ili210x - fix permissions on "calibrate" attribute
  Input: elan_i2c - properly wake up touchpad on ASUS laptops
  Input: add driver for Silead touchscreens
  Input: elantech - fix debug dump of the current packet
  Input: rotary_encoder - support binary encoding of states
  Input: xpad - power off wireless 360 controllers on suspend
  Input: i8042 - break load dependency between atkbd/psmouse and i8042
  Input: synaptics-rmi4 - do not check for NULL when calling of_node_put()
  Input: cros_ec_keyb - cleanup use of dev

4 years agoMerge tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Sat, 6 Aug 2016 03:07:43 +0000 (23:07 -0400)]
Merge tag 'usb-4.8-rc1' of git://git./linux/kernel/git/gregkh/usb

Pull more USB updates from Greg KH:
 "Here are a few more straggler patches for USB for 4.8-rc1.

  Most of these are for the usb-serial driver tree.  All of those have
  been in linux-next for a long time, but missed my previous pull
  request to you.

  The remaining change is to fix up a staging tree build error, due to
  some USB gadget driver changes that went in.  I put it in this tree as
  it was for a USB driver and people are reporting the build error on
  your tree.

  All of these have been in linux-next for this week, and longer for the
  usb-serial changes"

* tag 'usb-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  staging: emxx_udc: allow modular build
  USB: serial: use variable for status
  USB: serial: option: add support for Telit LE910 PID 0x1206
  USB: serial: cp210x: use kmemdup
  USB: serial: ti_usb_3410_5052: use functions rather than macros
  USB: serial: ti_usb_3410_5052: remove ti_usb_3410_5052.h
  USB: serial: ti_usb_3410_5052: use __packed
  USB: serial: ti_usb_3410_5052: remove useless comments

4 years agoramoops: use persistent_ram_free() instead of kfree() for freeing prz
Hiraku Toyooka [Mon, 25 Jul 2016 03:56:55 +0000 (12:56 +0900)]
ramoops: use persistent_ram_free() instead of kfree() for freeing prz

persistent_ram_zone(=prz) structures are allocated by persistent_ram_new(),
which includes vmap() or ioremap(). But they are currently freed by
kfree(). This uses persistent_ram_free() for correct this asymmetry usage.

Signed-off-by: Hiraku Toyooka <hiraku.toyooka.gu@hitachi.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.kw@hitachi.com>
Cc: Mark Salyzyn <salyzyn@android.com>
Cc: Seiji Aguchi <seiji.aguchi.tr@hitachi.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
4 years agoramoops: use DT reserved-memory bindings
Kees Cook [Sat, 30 Jul 2016 01:11:32 +0000 (18:11 -0700)]
ramoops: use DT reserved-memory bindings

Instead of a ramoops-specific node, use a child node of /reserved-memory.
This requires that of_platform_device_create() be explicitly called
for the node, though, since "/reserved-memory" does not have its own
"compatible" property.

Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
4 years agoMerge branches 'acpi-ec' and 'acpi-button'
Rafael J. Wysocki [Fri, 5 Aug 2016 14:04:49 +0000 (16:04 +0200)]
Merge branches 'acpi-ec' and 'acpi-button'

* acpi-ec:
  ACPI / EC: Work around method reentrancy limit in ACPICA for _Qxx

* acpi-button:
  ACPI / button: remove pointer to old lid_sysfs on unbind

4 years agoMerge tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Linus Torvalds [Fri, 5 Aug 2016 13:48:22 +0000 (09:48 -0400)]
Merge tag 'rtc-4.8' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "RTC for 4.8

  Cleanups:
   - huge cleanup of rtc-generic and char/genrtc this allowed to cleanup
     rtc-cmos, rtc-sh, rtc-m68k, rtc-powerpc and rtc-parisc
   - move mn10300 to rtc-cmos

  Subsystem:
   - fix wakealarms after hibernate
   - multiples fixes for rctest
   - simplify implementations of .read_alarm

  New drivers:
   - Maxim MAX6916

  Drivers:
   - ds1307: fix weekday
   - m41t80: add wakeup support
   - pcf85063: add support for PCF85063A variant
   - rv8803: extend i2c fix and other fixes
   - s35390a: fix alarm reading, this fixes instant reboot after
     shutdown for QNAP TS-41x
   - s3c: clock fixes"

* tag 'rtc-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (65 commits)
  rtc: rv8803: Clear V1F when setting the time
  rtc: rv8803: Stop the clock while setting the time
  rtc: rv8803: Always apply the I²C workaround
  rtc: rv8803: Fix read day of week
  rtc: rv8803: Remove the check for valid time
  rtc: rv8803: Kconfig: Indicate rx8900 support
  rtc: asm9260: remove .owner field for driver
  rtc: at91sam9: Fix missing spin_lock_init()
  rtc: m41t80: add suspend handlers for alarm IRQ
  rtc: m41t80: make it a real error message
  rtc: pcf85063: Add support for the PCF85063A device
  rtc: pcf85063: fix year range
  rtc: hym8563: in .read_alarm set .tm_sec to 0 to signal minute accuracy
  rtc: explicitly set tm_sec = 0 for drivers with minute accurancy
  rtc: s3c: Add s3c_rtc_{enable/disable}_clk in s3c_rtc_setfreq()
  rtc: s3c: Remove unnecessary call to disable already disabled clock
  rtc: abx80x: use devm_add_action_or_reset()
  rtc: m41t80: use devm_add_action_or_reset()
  rtc: fix a typo and reduce three empty lines to one
  rtc: s35390a: improve two comments in .set_alarm
  ...

4 years agoMerge branches 'pm-sleep', 'pm-cpufreq', 'pm-core' and 'pm-opp'
Rafael J. Wysocki [Fri, 5 Aug 2016 13:46:55 +0000 (15:46 +0200)]
Merge branches 'pm-sleep', 'pm-cpufreq', 'pm-core' and 'pm-opp'

* pm-sleep:
  x86/power/64: Do not refer to __PAGE_OFFSET from assembly code

* pm-cpufreq:
  cpufreq: Do not default-yes CPU_FREQ_STAT
  cpufreq: intel_pstate: Add more out-of-band IDs

* pm-core:
  PM-wakeup: Delete unnecessary checks before three function calls

* pm-opp:
  PM / OPP: optimize dev_pm_opp_set_rate() performance a bit

4 years agoMerge tag 'sound-fix-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Fri, 5 Aug 2016 13:45:14 +0000 (09:45 -0400)]
Merge tag 'sound-fix-4.8-rc1' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Nothing existing here: as usual a few HD-audio fixes (device fixups, a
  new AMD PCI ID, and a fix for krealloc() usage), in addition to a fix
  in Kconfig for legacy arm drivers"

* tag 'sound-fix-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix headset mic detection problem for two dell machines
  ALSA: hda: Fix krealloc() with __GFP_ZERO usage
  ALSA: hda: add AMD Bonaire AZ PCI ID with proper driver caps
  ALSA: arm: Fix empty menuconfig SND_ARM
  ALSA: hda - On-board speaker fixup on ACER Veriton
  ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO

4 years agoMerge tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Fri, 5 Aug 2016 13:00:54 +0000 (09:00 -0400)]
Merge tag 'powerpc-4.8-2' of git://git./linux/kernel/git/powerpc/linux

Pull more powerpc updates from Michael Ellerman:
 "These were delayed for various reasons, so I let them sit in next a
  bit longer, rather than including them in my first pull request.

  Fixes:
   - Fix early access to cpu_spec relocation from Benjamin Herrenschmidt
   - Fix incorrect event codes in power9-event-list from Madhavan Srinivasan
   - Move register_process_table() out of ppc_md from Michael Ellerman

  Use jump_label use for [cpu|mmu]_has_feature():
   - Add mmu_early_init_devtree() from Michael Ellerman
   - Move disable_radix handling into mmu_early_init_devtree() from Michael Ellerman
   - Do hash device tree scanning earlier from Michael Ellerman
   - Do radix device tree scanning earlier from Michael Ellerman
   - Do feature patching before MMU init from Michael Ellerman
   - Check features don't change after patching from Michael Ellerman
   - Make MMU_FTR_RADIX a MMU family feature from Aneesh Kumar K.V
   - Convert mmu_has_feature() to returning bool from Michael Ellerman
   - Convert cpu_has_feature() to returning bool from Michael Ellerman
   - Define radix_enabled() in one place & use static inline from Michael Ellerman
   - Add early_[cpu|mmu]_has_feature() from Michael Ellerman
   - Convert early cpu/mmu feature check to use the new helpers from Aneesh Kumar K.V
   - jump_label: Make it possible for arches to invoke jump_label_init() earlier from Kevin Hao
   - Call jump_label_init() in apply_feature_fixups() from Aneesh Kumar K.V
   - Remove mfvtb() from Kevin Hao
   - Move cpu_has_feature() to a separate file from Kevin Hao
   - Add kconfig option to use jump labels for cpu/mmu_has_feature() from Michael Ellerman
   - Add option to use jump label for cpu_has_feature() from Kevin Hao
   - Add option to use jump label for mmu_has_feature() from Kevin Hao
   - Catch usage of cpu/mmu_has_feature() before jump label init from Aneesh Kumar K.V
   - Annotate jump label assembly from Michael Ellerman

  TLB flush enhancements from Aneesh Kumar K.V:
   - radix: Implement tlb mmu gather flush efficiently
   - Add helper for finding SLBE LLP encoding
   - Use hugetlb flush functions
   - Drop multiple definition of mm_is_core_local
   - radix: Add tlb flush of THP ptes
   - radix: Rename function and drop unused arg
   - radix/hugetlb: Add helper for finding page size
   - hugetlb: Add flush_hugetlb_tlb_range
   - remove flush_tlb_page_nohash

  Add new ptrace regsets from Anshuman Khandual and Simon Guo:
   - elf: Add powerpc specific core note sections
   - Add the function flush_tmregs_to_thread
   - Enable in transaction NT_PRFPREG ptrace requests
   - Enable in transaction NT_PPC_VMX ptrace requests
   - Enable in transaction NT_PPC_VSX ptrace requests
   - Adapt gpr32_get, gpr32_set functions for transaction
   - Enable support for NT_PPC_CGPR
   - Enable support for NT_PPC_CFPR
   - Enable support for NT_PPC_CVMX
   - Enable support for NT_PPC_CVSX
   - Enable support for TM SPR state
   - Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR
   - Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR
   - Enable support for EBB registers
   - Enable support for Performance Monitor registers"

* tag 'powerpc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (48 commits)
  powerpc/mm: Move register_process_table() out of ppc_md
  powerpc/perf: Fix incorrect event codes in power9-event-list
  powerpc/32: Fix early access to cpu_spec relocation
  powerpc/ptrace: Enable support for Performance Monitor registers
  powerpc/ptrace: Enable support for EBB registers
  powerpc/ptrace: Enable support for NT_PPPC_TAR, NT_PPC_PPR, NT_PPC_DSCR
  powerpc/ptrace: Enable NT_PPC_TM_CTAR, NT_PPC_TM_CPPR, NT_PPC_TM_CDSCR
  powerpc/ptrace: Enable support for TM SPR state
  powerpc/ptrace: Enable support for NT_PPC_CVSX
  powerpc/ptrace: Enable support for NT_PPC_CVMX
  powerpc/ptrace: Enable support for NT_PPC_CFPR
  powerpc/ptrace: Enable support for NT_PPC_CGPR
  powerpc/ptrace: Adapt gpr32_get, gpr32_set functions for transaction
  powerpc/ptrace: Enable in transaction NT_PPC_VSX ptrace requests
  powerpc/ptrace: Enable in transaction NT_PPC_VMX ptrace requests
  powerpc/ptrace: Enable in transaction NT_PRFPREG ptrace requests
  powerpc/process: Add the function flush_tmregs_to_thread
  elf: Add powerpc specific core note sections
  powerpc/mm: remove flush_tlb_page_nohash
  powerpc/mm/hugetlb: Add flush_hugetlb_tlb_range
  ...

4 years agoMerge tag 'metag-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan...
Linus Torvalds [Fri, 5 Aug 2016 12:58:00 +0000 (08:58 -0400)]
Merge tag 'metag-for-v4.8' of git://git./linux/kernel/git/jhogan/metag

Pull metag architecture updates from James Hogan:
 "Just a few minor fixes:

   - Fix another incorrect inline asm register constraint, which has
     been lying quietly for 5 and a half years before finally causing
     build breakage during this merge window.

   - Removal of duplicated KERN_INFO from Joe Perches

   - Typo fixes from Andrea Gelmini"

* tag 'metag-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
  metag: Fix __cmpxchg_u32 asm constraint for CMP
  metag: Remove duplicate KERN_<LEVEL> prefix
  metag: Fix typos

4 years agoACPI / hotplug / PCI: Runtime resume bridges before bus rescans
Rafael J. Wysocki [Fri, 5 Aug 2016 00:38:44 +0000 (02:38 +0200)]
ACPI / hotplug / PCI: Runtime resume bridges before bus rescans

If a PCI bridge (or PCIe port) that is runtime-suspended gets an ACPI
hotplug notification, such as a bus check, it has to be resumed before
re-scanning the devices below it, or those devices will not be
accessible and will be treated as hot-removed.

Make that happen and let the bridge suspend again after the bus below it
has been re-scanned.

This is a replacement for commit 16468c783cb4 ("ACPI / hotplug / PCI:
Runtime resume bridge before rescan") that has been reverted, because it
introduced a system resume regression (due to missing bridge->pci_dev
checks that are necessary in case the notification is targeted at the
host bridge) and it is necessary for the code added by commit
006d44e49a25 ("PCI: Add runtime PM support for PCIe ports") to work as
expected.

Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Fri, 5 Aug 2016 00:31:20 +0000 (20:31 -0400)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "A few late-breaking fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm/memblock.c: fix NULL dereference error
  MAINTAINERS: update cgroup's document path
  slub: drop bogus inline for fixup_red_left()
  powerpc/fsl_rio: fix a missing error code
  mm: initialise per_cpu_nodestats for all online pgdats at boot
  mm/memblock: fix a typo in a comment
  mm: disable CONFIG_MEMORY_HOTPLUG when KASAN is enabled

4 years agoMerge tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford...
Linus Torvalds [Fri, 5 Aug 2016 00:26:31 +0000 (20:26 -0400)]
Merge tag 'for-linus-2' of git://git./linux/kernel/git/dledford/rdma

Pull second round of rdma updates from Doug Ledford:
 "This can be split out into just two categories:

   - fixes to the RDMA R/W API in regards to SG list length limits
     (about 5 patches)

   - fixes/features for the Intel hfi1 driver (everything else)

  The hfi1 driver is still being brought to full feature support by
  Intel, and they have a lot of people working on it, so that amounts to
  almost the entirety of this pull request"

* tag 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (84 commits)
  IB/hfi1: Add cache evict LRU list
  IB/hfi1: Fix memory leak during unexpected shutdown
  IB/hfi1: Remove unneeded mm argument in remove function
  IB/hfi1: Consistently call ops->remove outside spinlock
  IB/hfi1: Use evict mmu rb operation
  IB/hfi1: Add evict operation to the mmu rb handler
  IB/hfi1: Fix TID caching actions
  IB/hfi1: Make the cache handler own its rb tree root
  IB/hfi1: Make use of mm consistent
  IB/hfi1: Fix user SDMA racy user request claim
  IB/hfi1: Fix error condition that needs to clean up
  IB/hfi1: Release node on insert failure
  IB/hfi1: Validate SDMA user iovector count
  IB/hfi1: Validate SDMA user request index
  IB/hfi1: Use the same capability state for all shared contexts
  IB/hfi1: Prevent null pointer dereference
  IB/hfi1: Rename TID mmu_rb_* functions
  IB/hfi1: Remove unneeded empty check in hfi1_mmu_rb_unregister()
  IB/hfi1: Restructure hfi1_file_open
  IB/hfi1: Make iovec loop index easy to understand
  ...

4 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Linus Torvalds [Fri, 5 Aug 2016 00:10:31 +0000 (20:10 -0400)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull base rdma updates from Doug Ledford:
 "Round one of 4.8 code: while this is mostly normal, there is a new
  driver in here (the driver was hosted outside the kernel for several
  years and is actually a fairly mature and well coded driver).  It
  amounts to 13,000 of the 16,000 lines of added code in here.

  Summary:

   - Updates/fixes for iw_cxgb4 driver
   - Updates/fixes for mlx5 driver
   - Add flow steering and RSS API
   - Add hardware stats to mlx4 and mlx5 drivers
   - Add firmware version API for RDMA driver use
   - Add the rxe driver (this is a software RoCE driver that makes any
     Ethernet device a RoCE device)
   - Fixes for i40iw driver
   - Support for send only multicast joins in the cma layer
   - Other minor fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (72 commits)
  Soft RoCE driver
  IB/core: Support for CMA multicast join flags
  IB/sa: Add cached attribute containing SM information to SA port
  IB/uverbs: Fix race between uverbs_close and remove_one
  IB/mthca: Clean up error unwind flow in mthca_reset()
  IB/mthca: NULL arg to pci_dev_put is OK
  IB/hfi1: NULL arg to sc_return_credits is OK
  IB/mlx4: Add diagnostic hardware counters
  net/mlx4: Query performance and diagnostics counters
  net/mlx4: Add diagnostic counters capability bit
  Use smaller 512 byte messages for portmapper messages
  IB/ipoib: Report SG feature regardless of HW UD CSUM capability
  IB/mlx4: Don't use GFP_ATOMIC for CQ resize struct
  IB/hfi1: Disable by default
  IB/rdmavt: Disable by default
  IB/mlx5: Fix port counter ID association to QP offset
  IB/mlx5: Fix iteration overrun in GSI qps
  i40iw: Add NULL check for puda buffer
  i40iw: Change dup_ack_thresh to u8
  i40iw: Remove unnecessary check for moving CQ head
  ...

4 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target...
Linus Torvalds [Fri, 5 Aug 2016 00:04:37 +0000 (20:04 -0400)]
Merge branch 'for-next' of git://git./linux/kernel/git/nab/target-pending

Pull SCSI target updates from Nicholas Bellinger:
 "The most notable item is IBM virtual SCSI target driver, that was
  originally ported to target-core back in 2010 by Tomo-san, and has
  been brought forward to v4.x code by Bryant Ly, Michael Cyr and co
  over the last months.

  Also included are two ORDERED task related bug-fixes Bryant + Michael
  found along the way using ibmvscsis with AIX guests, plus a few
  miscellaneous target-core + iscsi-target bug-fixes with associated
  stable tags"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: fix spelling mistake: "limitiation" -> "limitation"
  target: Fix residual overflow handling in target_complete_cmd_with_length
  tcm_fc: set and unset FCP_SPPF_TARG_FCN
  iscsi-target: Fix panic when adding second TCP connection to iSCSI session
  ibmvscsis: Initial commit of IBM VSCSI Tgt Driver
  target: Fix ordered task CHECK_CONDITION early exception handling
  target: Fix ordered task target_setup_cmd_from_cdb exception hang
  target: Fix max_unmap_lba_count calc overflow
  target: Fix race between iscsi-target connection shutdown + ABORT_TASK
  target: Fix missing complete during ABORT_TASK + CMD_T_FABRIC_STOP

4 years agomm/memblock.c: fix NULL dereference error
zijun_hu [Thu, 4 Aug 2016 22:32:00 +0000 (15:32 -0700)]
mm/memblock.c: fix NULL dereference error

It causes NULL dereference error and failure to get type_a->regions[0]
info if parameter type_b of __next_mem_range_rev() == NULL

Fix this by checking before dereferring and initializing idx_b to 0

The approach is tested by dumping all types of region via
__memblock_dump_all() and __next_mem_range_rev() fixed to UART
separately the result is okay after checking the logs.

Link: http://lkml.kernel.org/r/57A0320D.6070102@zoho.com
Signed-off-by: zijun_hu <zijun_hu@htc.com>
Tested-by: zijun_hu <zijun_hu@htc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMAINTAINERS: update cgroup's document path
seokhoon.yoon [Thu, 4 Aug 2016 22:31:57 +0000 (15:31 -0700)]
MAINTAINERS: update cgroup's document path

cgroup's document path is changed to "cgroup-v1".  update it.

Link: http://lkml.kernel.org/r/1470322507-5161-1-git-send-email-iamyooon@gmail.com
Signed-off-by: seokhoon.yoon <iamyooon@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoslub: drop bogus inline for fixup_red_left()
Geert Uytterhoeven [Thu, 4 Aug 2016 22:31:55 +0000 (15:31 -0700)]
slub: drop bogus inline for fixup_red_left()

With m68k-linux-gnu-gcc-4.1:

    include/linux/slub_def.h:126: warning: `fixup_red_left' declared inline after being called
    include/linux/slub_def.h:126: warning: previous declaration of `fixup_red_left' was here

Commit c146a2b98eb5 ("mm, kasan: account for object redzone in SLUB's
nearest_obj()") made fixup_red_left() global, but forgot to remove the
inline keyword.

Fixes: c146a2b98eb5898e ("mm, kasan: account for object redzone in SLUB's nearest_obj()")
Link: http://lkml.kernel.org/r/1470256262-1586-1-git-send-email-geert@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Alexander Potapenko <glider@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agopowerpc/fsl_rio: fix a missing error code
Dan Carpenter [Thu, 4 Aug 2016 22:31:52 +0000 (15:31 -0700)]
powerpc/fsl_rio: fix a missing error code

We should set the error code here rather than incorrectly returning 0.
Otherwise static checkers complain.

Link: http://lkml.kernel.org/r/20160804053525.GM775@mwanda
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: initialise per_cpu_nodestats for all online pgdats at boot
Mel Gorman [Thu, 4 Aug 2016 22:31:49 +0000 (15:31 -0700)]
mm: initialise per_cpu_nodestats for all online pgdats at boot

Paul Mackerras and Reza Arbab reported that machines with memoryless
nodes fail when vmstats are refreshed.  Paul reported an oops as follows

  Unable to handle kernel paging request for data at address 0xff7a10000
  Faulting instruction address: 0xc000000000270cd0
  Oops: Kernel access of bad area, sig: 11 [#1]
  SMP NR_CPUS=2048 NUMA PowerNV
  Modules linked in:
  CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-kvm+ #118
  task: c000000ff0680010 task.stack: c000000ff0704000
  NIP: c000000000270cd0 LR: c000000000270ce8 CTR: 0000000000000000
  REGS: c000000ff0707900 TRAP: 0300   Not tainted  (4.7.0-kvm+)
  MSR: 9000000102009033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE,TM[E]>  CR: 846b6824  XER: 20000000
  CFAR: c000000000008768 DAR: 0000000ff7a10000 DSISR: 42000000 SOFTE: 1
  NIP refresh_zone_stat_thresholds+0x80/0x240
  LR refresh_zone_stat_thresholds+0x98/0x240
  Call Trace:
    refresh_zone_stat_thresholds+0xb8/0x240 (unreliable)

Both supplied potential fixes but one potentially misses checks and
another had redundant initialisations.  This version initialises
per_cpu_nodestats on a per-pgdat basis instead of on a per-zone basis.

Link: http://lkml.kernel.org/r/20160804092404.GI2799@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Paul Mackerras <paulus@ozlabs.org>
Reported-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Tested-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm/memblock: fix a typo in a comment
Alexander Kuleshov [Thu, 4 Aug 2016 22:31:46 +0000 (15:31 -0700)]
mm/memblock: fix a typo in a comment

s/accomodate/accommodate/

Link: http://lkml.kernel.org/r/20160804121824.18100-1-kuleshovmail@gmail.com
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomm: disable CONFIG_MEMORY_HOTPLUG when KASAN is enabled
zhong jiang [Thu, 4 Aug 2016 22:31:44 +0000 (15:31 -0700)]
mm: disable CONFIG_MEMORY_HOTPLUG when KASAN is enabled

At present it is obvious that memory online and offline will fail when
KASAN is enabled.  So add the condition to limit the memory_hotplug when
KASAN is enabled.

Link: http://lkml.kernel.org/r/1470063651-29519-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Thu, 4 Aug 2016 23:59:06 +0000 (19:59 -0400)]
Merge tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "Highlights:

   - Trond made a change to the server's tcp logic that allows a fast
     client to better take advantage of high bandwidth networks, but may
     increase the risk that a single client could starve other clients;
     a new sunrpc.svc_rpc_per_connection_limit parameter should help
     mitigate this in the (hopefully unlikely) event this becomes a
     problem in practice.

   - Tom Haynes added a minimal flex-layout pnfs server, which is of no
     use in production for now--don't build it unless you're doing
     client testing or further server development"

* tag 'nfsd-4.8' of git://linux-nfs.org/~bfields/linux: (32 commits)
  nfsd: remove some dead code in nfsd_create_locked()
  nfsd: drop unnecessary MAY_EXEC check from create
  nfsd: clean up bad-type check in nfsd_create_locked
  nfsd: remove unnecessary positive-dentry check
  nfsd: reorganize nfsd_create
  nfsd: check d_can_lookup in fh_verify of directories
  nfsd: remove redundant zero-length check from create
  nfsd: Make creates return EEXIST instead of EACCES
  SUNRPC: Detect immediate closure of accepted sockets
  SUNRPC: accept() may return sockets that are still in SYN_RECV
  nfsd: allow nfsd to advertise multiple layout types
  nfsd: Close race between nfsd4_release_lockowner and nfsd4_lock
  nfsd/blocklayout: Make sure calculate signature/designator length aligned
  xfs: abstract block export operations from nfsd layouts
  SUNRPC: Remove unused callback xpo_adjust_wspace()
  SUNRPC: Change TCP socket space reservation
  SUNRPC: Add a server side per-connection limit
  SUNRPC: Micro optimisation for svc_data_ready
  SUNRPC: Call the default socket callbacks instead of open coding
  SUNRPC: lock the socket while detaching it
  ...

4 years agoMerge branch 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason...
Linus Torvalds [Thu, 4 Aug 2016 23:56:16 +0000 (19:56 -0400)]
Merge branch 'for-linus-4.8' of git://git./linux/kernel/git/mason/linux-btrfs

Pull more btrfs updates from Chris Mason:
 "This is part two of my btrfs pull, which is some cleanups and a batch
  of fixes.

  Most of the code here is from Jeff Mahoney, making the pointers we
  pass around internally more consistent and less confusing overall.  I
  noticed a small problem right before I sent this out yesterday, so I
  fixed it up and re-tested overnight"

* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (40 commits)
  Btrfs: fix __MAX_CSUM_ITEMS
  btrfs: btrfs_abort_transaction, drop root parameter
  btrfs: add btrfs_trans_handle->fs_info pointer
  btrfs: btrfs_relocate_chunk pass extent_root to btrfs_end_transaction
  btrfs: convert nodesize macros to static inlines
  btrfs: introduce BTRFS_MAX_ITEM_SIZE
  btrfs: cleanup, remove prototype for btrfs_find_root_ref
  btrfs: copy_to_sk drop unused root parameter
  btrfs: simpilify btrfs_subvol_inherit_props
  btrfs: tests, use BTRFS_FS_STATE_DUMMY_FS_INFO instead of dummy root
  btrfs: tests, require fs_info for root
  btrfs: tests, move initialization into tests/
  btrfs: btrfs_test_opt and friends should take a btrfs_fs_info
  btrfs: prefix fsid to all trace events
  btrfs: plumb fs_info into btrfs_work
  btrfs: remove obsolete part of comment in statfs
  btrfs: hide test-only member under ifdef
  btrfs: Ratelimit "no csum found" info message
  btrfs: Add ratelimit to btrfs printing
  Btrfs: fix unexpected balance crash due to BUG_ON
  ...

4 years agoMerge tag 'upstream-4.8-rc1' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Thu, 4 Aug 2016 23:51:49 +0000 (19:51 -0400)]
Merge tag 'upstream-4.8-rc1' of git://git.infradead.org/linux-ubifs

Pull UBI/UBIFS updates from Richard Weinberger:
 "This contains mostly cleanups and minor improvements of UBI and UBIFS"

* tag 'upstream-4.8-rc1' of git://git.infradead.org/linux-ubifs:
  ubi: Use bitmaps in Fastmap self-check code
  ubi: Be more paranoid while seaching for the most recent Fastmap
  ubi: Check whether the Fastmap anchor matches the super block
  ubi: Rework Fastmap attach base code
  ubi: Fix whitespace issue in count_fastmap_pebs()
  ubi: Introduce vol_ignored()
  ubi: Fix scan_fast() comment
  ubifs: switch_gc_head: Remove redondant sync of wbuf
  ubi: Make volume resize power cut aware
  ubi: Fix early logging
  ubi: gluebi: Fix double refcounting
  ubifs: Silence early error messages if MS_SILENT is set
  ubi: Fix race condition between ubi device creation and udev
  ubifs: Update comment for ubifs_errc
  ubi: Only read necessary size when reading the VID header
  ubifs: Make xattr structures static
  ubifs: Silence error output if MS_SILENT is set

4 years agoMerge branch 'for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 4 Aug 2016 23:37:59 +0000 (19:37 -0400)]
Merge branch 'for-linus-4.8-rc1' of git://git./linux/kernel/git/rw/uml

Pull UML updates from Richard Weinberger:
 "Beside of various fixes this also contains patches to enable features
  such was Kcov, kmemleak and TRACE_IRQFLAGS_SUPPORT on UML"

* 'for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  hostfs: Freeing an ERR_PTR in hostfs_fill_sb_common()
  um: Support kcov
  um: Enable TRACE_IRQFLAGS_SUPPORT
  um: Use asm-generic/irqflags.h
  um: Fix possible deadlock in sig_handler_common()
  um: Select HAVE_DEBUG_KMEMLEAK
  um: Setup physical memory in setup_arch()
  um: Eliminate null test after alloc_bootmem

4 years agoMerge branch 'parisc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Thu, 4 Aug 2016 22:31:14 +0000 (18:31 -0400)]
Merge branch 'parisc-4.8-1' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc updates from Helge Deller:

 - added an optimized hash implementation for parisc (George Spelvin)

 - C99 style cleanups in iomap.c (Amitoj Kaur Chawla)

 - added breaks to switch statement in PDC function (noticed by Dan
   Carpenter)

* 'parisc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Change structure intialisation to C99 style in iomap.c
  parisc: Add break statements to pdc_pat_io_pci_cfg_read()
  parisc: Add <asm/hash.h>

4 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Linus Torvalds [Thu, 4 Aug 2016 22:04:44 +0000 (18:04 -0400)]
Merge branch 'for-linus' of git://git./linux/kernel/git/gerg/m68knommu

Pull m68knommu updates from Greg Ungerer:
 "This series is all about Nicolas flat format support for MMU systems.

  Traditional m68k no-MMU flat format binaries can now be run on m68k
  MMU enabled systems too.  The series includes some nice cleanups of
  the binfmt_flat code and converts it to using proper user space
  accessor functions.

  With all this in place you can boot and run a complete no-MMU flat
  format based user space on an MMU enabled system"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: enable binfmt_flat on systems with an MMU
  binfmt_flat: allow compressed flat binary format to work on MMU systems
  binfmt_flat: add MMU-specific support
  binfmt_flat: update libraries' data segment pointer with userspace accessors
  binfmt_flat: use clear_user() rather than memset() to clear .bss
  binfmt_flat: use proper user space accessors with old relocs code
  binfmt_flat: use proper user space accessors with relocs processing code
  binfmt_flat: clean up create_flat_tables() and stack accesses
  binfmt_flat: use generic transfer_args_to_stack()
  elf_fdpic_transfer_args_to_stack(): make it generic
  binfmt_flat: prevent kernel dammage from corrupted executable headers
  binfmt_flat: convert printk invocations to their modern form
  binfmt_flat: assorted cleanups
  m68k: use same start_thread() on MMU and no-MMU
  m68k: fix file path comment
  m68k: fix bFLT executable running on MMU enabled systems

4 years agonfsd: remove some dead code in nfsd_create_locked()
Dan Carpenter [Wed, 3 Aug 2016 19:05:00 +0000 (22:05 +0300)]
nfsd: remove some dead code in nfsd_create_locked()

We changed this around in f135af1041f ('nfsd: reorganize nfsd_create')
so "dchild" can't be an error pointer any more.  Also, dchild can't be
NULL here (and dput would already handle this even if it was).

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
4 years agonfsd: drop unnecessary MAY_EXEC check from create
J. Bruce Fields [Thu, 21 Jul 2016 20:00:12 +0000 (16:00 -0400)]
nfsd: drop unnecessary MAY_EXEC check from create

We need an fh_verify to make sure we at least have a dentry, but actual
permission checks happen later.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
4 years agonfsd: clean up bad-type check in nfsd_create_locked
J. Bruce Fields [Fri, 22 Jul 2016 16:03:46 +0000 (12:03 -0400)]
nfsd: clean up bad-type check in nfsd_create_locked

Minor cleanup, no change in behavior.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
4 years agonfsd: remove unnecessary positive-dentry check
J. Bruce Fields [Fri, 22 Jul 2016 01:55:42 +0000 (21:55 -0400)]
nfsd: remove unnecessary positive-dentry check

vfs_{create,mkdir,mknod} each begin with a call to may_create(), which
returns EEXIST if the object already exists.

This check is therefore unnecessary.

(In the NFSv2 case, nfsd_proc_create also has such a check.  Contrary to
RFC 1094, our code seems to believe that a CREATE of an existing file
should succeed.  I'm leaving that behavior alone.)

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
4 years agonfsd: reorganize nfsd_create
J. Bruce Fields [Wed, 20 Jul 2016 20:16:06 +0000 (16:16 -0400)]
nfsd: reorganize nfsd_create

There's some odd logic in nfsd_create() that allows it to be called with
the parent directory either locked or unlocked.  The only already-locked
caller is NFSv2's nfsd_proc_create().  It's less confusing to split out
the unlocked case into a separate function which the NFSv2 code can call
directly.

Also fix some comments while we're here.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
4 years agonfsd: check d_can_lookup in fh_verify of directories
J. Bruce Fields [Tue, 19 Jul 2016 21:33:04 +0000 (17:33 -0400)]
nfsd: check d_can_lookup in fh_verify of directories

Create and other nfsd ops generally assume we can call lookup_one_len on
inodes with S_IFDIR set.  Al says that this assumption isn't true in
general, though it should be for the filesystem objects nfsd sees.

Add a check just to make sure our assumption isn't violated.

Remove a couple checks for i_op->lookup in create code.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
4 years agonfsd: remove redundant zero-length check from create
J. Bruce Fields [Tue, 19 Jul 2016 21:25:42 +0000 (17:25 -0400)]
nfsd: remove redundant zero-length check from create

lookup_one_len already has this check.

The only effect of this patch is to return access instead of perm in the
0-length-filename case.  I actually prefer nfserr_perm (or _inval?), but
I doubt anyone cares.

The isdotent check seems redundant too, but I worry that some client
might actually care about that strange nfserr_exist error.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
4 years agonfsd: Make creates return EEXIST instead of EACCES
Oleg Drokin [Fri, 15 Jul 2016 03:20:22 +0000 (23:20 -0400)]
nfsd: Make creates return EEXIST instead of EACCES

When doing a create (mkdir/mknod) on a name, it's worth
checking the name exists first before returning EACCES in case
the directory is not writeable by the user.
This makes return values on the client more consistent
regardless of whenever the entry there is cached in the local
cache or not.
Another positive side effect is certain programs only expect
EEXIST in that case even despite POSIX allowing any valid
error to be returned.

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
4 years agomm/block: convert rw_page users to bio op use
Mike Christie [Thu, 4 Aug 2016 20:23:34 +0000 (14:23 -0600)]
mm/block: convert rw_page users to bio op use

The rw_page users were not converted to use bio/req ops. As a result
bdev_write_page is not passing down REQ_OP_WRITE and the IOs will
be sent down as reads.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixes: 4e1b2d52a80d ("block, fs, drivers: remove REQ_OP compat defs and related code")

Modified by me to:

1) Drop op_flags passing into ->rw_page(), as we don't use it.
2) Make op_is_write() and friends safe to use for !CONFIG_BLOCK

Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoloop: make do_req_filebacked more robust
Christoph Hellwig [Thu, 4 Aug 2016 14:10:01 +0000 (16:10 +0200)]
loop: make do_req_filebacked more robust

Use a switch statement to iterate over the possible operations and
error out if it's an incorrect one.

Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoloop: don't try to use AIO for discards
Christoph Hellwig [Thu, 4 Aug 2016 14:10:00 +0000 (16:10 +0200)]
loop: don't try to use AIO for discards

Fix a fat-fingered conversion to the req_op accessors, and also
use a switch statement to make it more obvious what is being checked.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dave Chinner <david@fromorbit.com>
Fixes: c2df40 ("drivers: use req op accessor");
Reviewed-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoblk-mq: fix deadlock in blk_mq_register_disk() error path
Jens Axboe [Tue, 2 Aug 2016 14:45:44 +0000 (08:45 -0600)]
blk-mq: fix deadlock in blk_mq_register_disk() error path

If we fail registering any of the hardware queues, we call
into blk_mq_unregister_disk() with the hotplug mutex already
held. Since blk_mq_unregister_disk() attempts to acquire the
same mutex, we end up in a less than happy place.

Reported-by: Jinpu Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoInclude: blkdev: Removed duplicate 'struct request;' declaration.
John Pittman [Mon, 1 Aug 2016 20:35:53 +0000 (16:35 -0400)]
Include: blkdev: Removed duplicate 'struct request;' declaration.

In include/linux/blkdev.h duplicate declarations of the request
struct exist.  Cleaned up by removing the second, unneeded
declaration.

Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoFixup direct bi_rw modifiers
Shaun Tancheff [Sat, 30 Jul 2016 21:45:48 +0000 (16:45 -0500)]
Fixup direct bi_rw modifiers

bi_rw should be using bio_set_op_attrs to set bi_rw.

Signed-off-by: Shaun Tancheff <shaun@tancheff.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Mike Christie <mchristi@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoblock: fix bdi vs gendisk lifetime mismatch
Dan Williams [Sun, 31 Jul 2016 18:15:13 +0000 (11:15 -0700)]
block: fix bdi vs gendisk lifetime mismatch

The name for a bdi of a gendisk is derived from the gendisk's devt.
However, since the gendisk is destroyed before the bdi it leaves a
window where a new gendisk could dynamically reuse the same devt while a
bdi with the same name is still live.  Arrange for the bdi to hold a
reference against its "owner" disk device while it is registered.
Otherwise we can hit sysfs duplicate name collisions like the following:

 WARNING: CPU: 10 PID: 2078 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x64/0x80
 sysfs: cannot create duplicate filename '/devices/virtual/bdi/259:1'

 Hardware name: HP ProLiant DL580 Gen8, BIOS P79 05/06/2015
  0000000000000286 0000000002c04ad5 ffff88006f24f970 ffffffff8134caec
  ffff88006f24f9c0 0000000000000000 ffff88006f24f9b0 ffffffff8108c351
  0000001f0000000c ffff88105d236000 ffff88105d1031e0 ffff8800357427f8
 Call Trace:
  [<ffffffff8134caec>] dump_stack+0x63/0x87
  [<ffffffff8108c351>] __warn+0xd1/0xf0
  [<ffffffff8108c3cf>] warn_slowpath_fmt+0x5f/0x80
  [<ffffffff812a0d34>] sysfs_warn_dup+0x64/0x80
  [<ffffffff812a0e1e>] sysfs_create_dir_ns+0x7e/0x90
  [<ffffffff8134faaa>] kobject_add_internal+0xaa/0x320
  [<ffffffff81358d4e>] ? vsnprintf+0x34e/0x4d0
  [<ffffffff8134ff55>] kobject_add+0x75/0xd0
  [<ffffffff816e66b2>] ? mutex_lock+0x12/0x2f
  [<ffffffff8148b0a5>] device_add+0x125/0x610
  [<ffffffff8148b788>] device_create_groups_vargs+0xd8/0x100
  [<ffffffff8148b7cc>] device_create_vargs+0x1c/0x20
  [<ffffffff811b775c>] bdi_register+0x8c/0x180
  [<ffffffff811b7877>] bdi_register_dev+0x27/0x30
  [<ffffffff813317f5>] add_disk+0x175/0x4a0

Cc: <stable@vger.kernel.org>
Reported-by: Yi Zhang <yizhan@redhat.com>
Tested-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fixed up missing 0 return in bdi_register_owner().

Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoblk-mq: Allow timeouts to run while queue is freezing
Gabriel Krisman Bertazi [Mon, 1 Aug 2016 14:23:39 +0000 (08:23 -0600)]
blk-mq: Allow timeouts to run while queue is freezing

In case a submitted request gets stuck for some reason, the block layer
can prevent the request starvation by starting the scheduled timeout work.
If this stuck request occurs at the same time another thread has started
a queue freeze, the blk_mq_timeout_work will not be able to acquire the
queue reference and will return silently, thus not issuing the timeout.
But since the request is already holding a q_usage_counter reference and
is unable to complete, it will never release its reference, preventing
the queue from completing the freeze started by first thread.  This puts
the request_queue in a hung state, forever waiting for the freeze
completion.

This was observed while running IO to a NVMe device at the same time we
toggled the CPU hotplug code. Eventually, once a request got stuck
requiring a timeout during a queue freeze, we saw the CPU Hotplug
notification code get stuck inside blk_mq_freeze_queue_wait, as shown in
the trace below.

[c000000deaf13690] [c000000deaf13738] 0xc000000deaf13738 (unreliable)
[c000000deaf13860] [c000000000015ce8] __switch_to+0x1f8/0x350
[c000000deaf138b0] [c000000000ade0e4] __schedule+0x314/0x990
[c000000deaf13940] [c000000000ade7a8] schedule+0x48/0xc0
[c000000deaf13970] [c0000000005492a4] blk_mq_freeze_queue_wait+0x74/0x110
[c000000deaf139e0] [c00000000054b6a8] blk_mq_queue_reinit_notify+0x1a8/0x2e0
[c000000deaf13a40] [c0000000000e7878] notifier_call_chain+0x98/0x100
[c000000deaf13a90] [c0000000000b8e08] cpu_notify_nofail+0x48/0xa0
[c000000deaf13ac0] [c0000000000b92f0] _cpu_down+0x2a0/0x400
[c000000deaf13b90] [c0000000000b94a8] cpu_down+0x58/0xa0
[c000000deaf13bc0] [c0000000006d5dcc] cpu_subsys_offline+0x2c/0x50
[c000000deaf13bf0] [c0000000006cd244] device_offline+0x104/0x140
[c000000deaf13c30] [c0000000006cd40c] online_store+0x6c/0xc0
[c000000deaf13c80] [c0000000006c8c78] dev_attr_store+0x68/0xa0
[c000000deaf13cc0] [c0000000003974d0] sysfs_kf_write+0x80/0xb0
[c000000deaf13d00] [c0000000003963e8] kernfs_fop_write+0x188/0x200
[c000000deaf13d50] [c0000000002e0f6c] __vfs_write+0x6c/0xe0
[c000000deaf13d90] [c0000000002e1ca0] vfs_write+0xc0/0x230
[c000000deaf13de0] [c0000000002e2cdc] SyS_write+0x6c/0x110
[c000000deaf13e30] [c000000000009204] system_call+0x38/0xb4

The fix is to allow the timeout work to execute in the window between
dropping the initial refcount reference and the release of the last
reference, which actually marks the freeze completion.  This can be
achieved with percpu_refcount_tryget, which does not require the counter
to be alive.  This way the timeout work can do it's job and terminate a
stuck request even during a freeze, returning its reference and avoiding
the deadlock.

Allowing the timeout to run is just a part of the fix, since for some
devices, we might get stuck again inside the device driver's timeout
handler, should it attempt to allocate a new request in that path -
which is a quite common action for Abort commands, which need to be sent
after a timeout.  In NVMe, for instance, we call blk_mq_alloc_request
from inside the timeout handler, which will fail during a freeze, since
it also tries to acquire a queue reference.

I considered a similar change to blk_mq_alloc_request as a generic
solution for further device driver hangs, but we can't do that, since it
would allow new requests to disturb the freeze process.  I thought about
creating a new function in the block layer to support unfreezable
requests for these occasions, but after working on it for a while, I
feel like this should be handled in a per-driver basis.  I'm now
experimenting with changes to the NVMe timeout path, but I'm open to
suggestions of ways to make this generic.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-nvme@lists.infradead.org
Cc: linux-block@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agonbd: fix race in ioctl
Vegard Nossum [Fri, 27 May 2016 10:59:35 +0000 (12:59 +0200)]
nbd: fix race in ioctl

Quentin ran into this bug:

WARNING: CPU: 64 PID: 10085 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x65/0x80
sysfs: cannot create duplicate filename '/devices/virtual/block/nbd3/pid'
Modules linked in: nbd
CPU: 64 PID: 10085 Comm: qemu-nbd Tainted: G      D         4.6.0+ #7
 0000000000000000 ffff8820330bba68 ffffffff814b8791 ffff8820330bbac8
 0000000000000000 ffff8820330bbab8 ffffffff810d04ab ffff8820330bbaa8
 0000001f00000296 0000000000017681 ffff8810380bf000 ffffffffa0001790
Call Trace:
 [<ffffffff814b8791>] dump_stack+0x4d/0x6c
 [<ffffffff810d04ab>] __warn+0xdb/0x100
 [<ffffffff810d0574>] warn_slowpath_fmt+0x44/0x50
 [<ffffffff81218c65>] sysfs_warn_dup+0x65/0x80
 [<ffffffff81218a02>] sysfs_add_file_mode_ns+0x172/0x180
 [<ffffffff81218a35>] sysfs_create_file_ns+0x25/0x30
 [<ffffffff81594a76>] device_create_file+0x36/0x90
 [<ffffffffa0000e8d>] __nbd_ioctl+0x32d/0x9b0 [nbd]
 [<ffffffff814cc8e8>] ? find_next_bit+0x18/0x20
 [<ffffffff810f7c29>] ? select_idle_sibling+0xe9/0x120
 [<ffffffff810f6cd7>] ? __enqueue_entity+0x67/0x70
 [<ffffffff810f9bf0>] ? enqueue_task_fair+0x630/0xe20
 [<ffffffff810efa76>] ? resched_curr+0x36/0x70
 [<ffffffff810f0078>] ? check_preempt_curr+0x78/0x90
 [<ffffffff810f00a2>] ? ttwu_do_wakeup+0x12/0x80
 [<ffffffff810f01b1>] ? ttwu_do_activate.constprop.86+0x61/0x70
 [<ffffffff810f0c15>] ? try_to_wake_up+0x185/0x2d0
 [<ffffffff810f0d6d>] ? default_wake_function+0xd/0x10
 [<ffffffff81105471>] ? autoremove_wake_function+0x11/0x40
 [<ffffffffa0001577>] nbd_ioctl+0x67/0x94 [nbd]
 [<ffffffff814ac0fd>] blkdev_ioctl+0x14d/0x940
 [<ffffffff811b0da2>] ? put_pipe_info+0x22/0x60
 [<ffffffff811d96cc>] block_ioctl+0x3c/0x40
 [<ffffffff811ba08d>] do_vfs_ioctl+0x8d/0x5e0
 [<ffffffff811aa329>] ? ____fput+0x9/0x10
 [<ffffffff810e9092>] ? task_work_run+0x72/0x90
 [<ffffffff811ba627>] SyS_ioctl+0x47/0x80
 [<ffffffff8185f5df>] entry_SYSCALL_64_fastpath+0x17/0x93
---[ end trace 7899b295e4f850c8 ]---

It seems fairly obvious that device_create_file() is not being protected
from being run concurrently on the same nbd.

Quentin found the following relevant commits:

1a2ad21 nbd: add locking to nbd_ioctl
90b8f28 [PATCH] end of methods switch: remove the old ones
d4430d6 [PATCH] beginning of methods conversion
08f8585 [PATCH] move block_device_operations to blkdev.h

It would seem that the race was introduced in the process of moving nbd
from BKL to unlocked ioctls.

By setting nbd->task_recv while the mutex is held, we can prevent other
processes from running concurrently (since nbd->task_recv is also checked
while the mutex is held).

Reported-and-tested-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Markus Pargmann <mpa@pengutronix.de>
Cc: Paul Clements <paul.clements@steeleye.com>
Cc: Pavel Machek <pavel@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoblock: fix use-after-free in seq file
Vegard Nossum [Fri, 29 Jul 2016 08:40:31 +0000 (10:40 +0200)]
block: fix use-after-free in seq file

I got a KASAN report of use-after-free:

    ==================================================================
    BUG: KASAN: use-after-free in klist_iter_exit+0x61/0x70 at addr ffff8800b6581508
    Read of size 8 by task trinity-c1/315
    =============================================================================
    BUG kmalloc-32 (Not tainted): kasan: bad access detected
    -----------------------------------------------------------------------------

    Disabling lock debugging due to kernel taint
    INFO: Allocated in disk_seqf_start+0x66/0x110 age=144 cpu=1 pid=315
            ___slab_alloc+0x4f1/0x520
            __slab_alloc.isra.58+0x56/0x80
            kmem_cache_alloc_trace+0x260/0x2a0
            disk_seqf_start+0x66/0x110
            traverse+0x176/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a
    INFO: Freed in disk_seqf_stop+0x42/0x50 age=160 cpu=1 pid=315
            __slab_free+0x17a/0x2c0
            kfree+0x20a/0x220
            disk_seqf_stop+0x42/0x50
            traverse+0x3b5/0x860
            seq_read+0x7e3/0x11a0
            proc_reg_read+0xbc/0x180
            do_loop_readv_writev+0x134/0x210
            do_readv_writev+0x565/0x660
            vfs_readv+0x67/0xa0
            do_preadv+0x126/0x170
            SyS_preadv+0xc/0x10
            do_syscall_64+0x1a1/0x460
            return_from_SYSCALL_64+0x0/0x6a

    CPU: 1 PID: 315 Comm: trinity-c1 Tainted: G    B           4.7.0+ #62
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
     ffffea0002d96000 ffff880119b9f918 ffffffff81d6ce81 ffff88011a804480
     ffff8800b6581500 ffff880119b9f948 ffffffff8146c7bd ffff88011a804480
     ffffea0002d96000 ffff8800b6581500 fffffffffffffff4 ffff880119b9f970
    Call Trace:
     [<ffffffff81d6ce81>] dump_stack+0x65/0x84
     [<ffffffff8146c7bd>] print_trailer+0x10d/0x1a0
     [<ffffffff814704ff>] object_err+0x2f/0x40
     [<ffffffff814754d1>] kasan_report_error+0x221/0x520
     [<ffffffff8147590e>] __asan_report_load8_noabort+0x3e/0x40
     [<ffffffff83888161>] klist_iter_exit+0x61/0x70
     [<ffffffff82404389>] class_dev_iter_exit+0x9/0x10
     [<ffffffff81d2e8ea>] disk_seqf_stop+0x3a/0x50
     [<ffffffff8151f812>] seq_read+0x4b2/0x11a0
     [<ffffffff815f8fdc>] proc_reg_read+0xbc/0x180
     [<ffffffff814b24e4>] do_loop_readv_writev+0x134/0x210
     [<ffffffff814b4c45>] do_readv_writev+0x565/0x660
     [<ffffffff814b8a17>] vfs_readv+0x67/0xa0
     [<ffffffff814b8de6>] do_preadv+0x126/0x170
     [<ffffffff814b92ec>] SyS_preadv+0xc/0x10

This problem can occur in the following situation:

open()
 - pread()
    - .seq_start()
       - iter = kmalloc() // succeeds
       - seqf->private = iter
    - .seq_stop()
       - kfree(seqf->private)
 - pread()
    - .seq_start()
       - iter = kmalloc() // fails
    - .seq_stop()
       - class_dev_iter_exit(seqf->private) // boom! old pointer

As the comment in disk_seqf_stop() says, stop is called even if start
failed, so we need to reinitialise the private pointer to NULL when seq
iteration stops.

An alternative would be to set the private pointer to NULL when the
kmalloc() in disk_seqf_start() fails.

Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agof2fs: drop bio->bi_rw manual assignment
Jens Axboe [Wed, 27 Jul 2016 18:52:21 +0000 (12:52 -0600)]
f2fs: drop bio->bi_rw manual assignment

Merge 4fc29c1aa375 included this extra line, but it's not needed (or
useful) since we'll bio_set_op_attrs() right after to properly set
the op and flags for the bio.

Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoblock: add missing group association in bio-cloning functions
Paolo Valente [Wed, 27 Jul 2016 05:22:05 +0000 (07:22 +0200)]
block: add missing group association in bio-cloning functions

When a bio is cloned, the newly created bio must be associated with
the same blkcg as the original bio (if BLK_CGROUP is enabled). If
this operation is not performed, then the new bio is not associated
with any group, and the group of the current task is returned when
the group of the bio is requested.

Depending on the cloning frequency, this may cause a large
percentage of the bios belonging to a given group to be treated
as if belonging to other groups (in most cases as if belonging to
the root group). The expected group isolation may thereby be broken.

This commit adds the missing association in bio-cloning functions.

Fixes: da2f0f74cf7d ("Btrfs: add support for blkio controllers")
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Reviewed-by: Nikolay Borisov <kernel@kyup.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoblkcg: kill unused field nr_undestroyed_grps
Hou Tao [Tue, 26 Jul 2016 09:13:42 +0000 (17:13 +0800)]
blkcg: kill unused field nr_undestroyed_grps

'nr_undestroyed_grps' in struct throtl_data was used to count
the number of throtl_grp related with throtl_data, but now
throtl_grp is tracked by blkcg_gq, so it is useless anymore.

Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agowriteback: Write dirty times for WB_SYNC_ALL writeback
Jan Kara [Tue, 26 Jul 2016 09:38:20 +0000 (11:38 +0200)]
writeback: Write dirty times for WB_SYNC_ALL writeback

Currently we take care to handle I_DIRTY_TIME in vfs_fsync() and
queue_io() so that inodes which have only dirty timestamps are properly
written on fsync(2) and sync(2). However there are other call sites -
most notably going through write_inode_now() - which expect inode to be
clean after WB_SYNC_ALL writeback. This is not currently true as we do
not clear I_DIRTY_TIME in __writeback_single_inode() even for
WB_SYNC_ALL writeback in all the cases. This then resulted in the
following oops because bdev_write_inode() did not clean the inode and
writeback code later stumbled over a dirty inode with detached wb.

  general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
  Modules linked in:
  CPU: 3 PID: 32 Comm: kworker/u10:1 Not tainted 4.6.0-rc3+ #349
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
  Workqueue: writeback wb_workfn (flush-11:0)
  task: ffff88006ccf1840 ti: ffff88006cda8000 task.ti: ffff88006cda8000
  RIP: 0010:[<ffffffff818884d2>]  [<ffffffff818884d2>]
  locked_inode_to_wb_and_lock_list+0xa2/0x750
  RSP: 0018:ffff88006cdaf7d0  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88006ccf2050
  RDX: 0000000000000000 RSI: 000000114c8a8484 RDI: 0000000000000286
  RBP: ffff88006cdaf820 R08: ffff88006ccf1840 R09: 0000000000000000
  R10: 000229915090805f R11: 0000000000000001 R12: ffff88006a72f5e0
  R13: dffffc0000000000 R14: ffffed000d4e5eed R15: ffffffff8830cf40
  FS:  0000000000000000(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000003301bf8 CR3: 000000006368f000 CR4: 00000000000006e0
  DR0: 0000000000001ec9 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600
  Stack:
   ffff88006a72f680 ffff88006a72f768 ffff8800671230d8 03ff88006cdaf948
   ffff88006a72f668 ffff88006a72f5e0 ffff8800671230d8 ffff88006cdaf948
   ffff880065b90cc8 ffff880067123100 ffff88006cdaf970 ffffffff8188e12e
  Call Trace:
   [<     inline     >] inode_to_wb_and_lock_list fs/fs-writeback.c:309
   [<ffffffff8188e12e>] writeback_sb_inodes+0x4de/0x1250 fs/fs-writeback.c:1554
   [<ffffffff8188efa4>] __writeback_inodes_wb+0x104/0x1e0 fs/fs-writeback.c:1600
   [<ffffffff8188f9ae>] wb_writeback+0x7ce/0xc90 fs/fs-writeback.c:1709
   [<     inline     >] wb_do_writeback fs/fs-writeback.c:1844
   [<ffffffff81891079>] wb_workfn+0x2f9/0x1000 fs/fs-writeback.c:1884
   [<ffffffff813bcd1e>] process_one_work+0x78e/0x15c0 kernel/workqueue.c:2094
   [<ffffffff813bdc2b>] worker_thread+0xdb/0xfc0 kernel/workqueue.c:2228
   [<ffffffff813cdeef>] kthread+0x23f/0x2d0 drivers/block/aoe/aoecmd.c:1303
   [<ffffffff867bc5d2>] ret_from_fork+0x22/0x50 arch/x86/entry/entry_64.S:392
  Code: 05 94 4a a8 06 85 c0 0f 85 03 03 00 00 e8 07 15 d0 ff 41 80 3e
  00 0f 85 64 06 00 00 49 8b 9c 24 88 01 00 00 48 89 d8 48 c1 e8 03 <42>
  80 3c 28 00 0f 85 17 06 00 00 48 8b 03 48 83 c0 50 48 39 c3
  RIP  [<     inline     >] wb_get include/linux/backing-dev-defs.h:212
  RIP  [<ffffffff818884d2>] locked_inode_to_wb_and_lock_list+0xa2/0x750
  fs/fs-writeback.c:281
   RSP <ffff88006cdaf7d0>
  ---[ end trace 986a4d314dcb2694 ]---

Fix the problem by making sure __writeback_single_inode() writes inode
only with dirty times in WB_SYNC_ALL mode.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agofloppy: fix open(O_ACCMODE) for ioctl-only open
Jiri Kosina [Thu, 16 Jun 2016 07:53:58 +0000 (09:53 +0200)]
floppy: fix open(O_ACCMODE) for ioctl-only open

Commit 09954bad4 ("floppy: refactor open() flags handling"), as a
side-effect, causes open(/dev/fdX, O_ACCMODE) to fail. It turns out that
this is being used setfdprm userspace for ioctl-only open().

Reintroduce back the original behavior wrt !(FMODE_READ|FMODE_WRITE)
modes, while still keeping the original O_NDELAY bug fixed.

Cc: stable@vger.kernel.org # v4.5+
Reported-by: Wim Osterholt <wim@djo.tudelft.nl>
Tested-by: Wim Osterholt <wim@djo.tudelft.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agometag: Fix __cmpxchg_u32 asm constraint for CMP
James Hogan [Thu, 4 Aug 2016 16:36:08 +0000 (17:36 +0100)]
metag: Fix __cmpxchg_u32 asm constraint for CMP

The LNKGET based atomic sequence in __cmpxchg_u32 has slightly incorrect
constraints for the return value which under certain circumstances can
allow an address unit register to be used as the first operand of a CMP
instruction. This isn't a valid instruction however as the encodings
only allow a data unit to be specified. This would result in an
assembler error like the following:

  Error: failed to assemble instruction: "CMP A0.2,D0Ar6"

Fix by changing the constraint from "=&da" (assigned, early clobbered,
data or address unit register) to "=&d" (data unit register only).

The constraint for the second operand, "bd" (an op2 register where op1
is a data unit register and the instruction supports O2R) is already
correct assuming the first operand is a data unit register.

Other cases of CMP in inline asm have had their constraints checked, and
appear to all be fine.

Fixes: 6006c0d8ce94 ("metag: Atomics, locks and bitops")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-metag@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.9.x-
4 years agoInput: silead - remove some dead code
Dan Carpenter [Thu, 4 Aug 2016 15:24:46 +0000 (08:24 -0700)]
Input: silead - remove some dead code

buf[0] is an unsigned char.  touch_nr is an int.  The test for negative
here doesn't make sense so I have removed it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
4 years agoInput: sis-i2c - select CONFIG_CRC_ITU_T
Arnd Bergmann [Thu, 4 Aug 2016 15:19:44 +0000 (08:19 -0700)]
Input: sis-i2c - select CONFIG_CRC_ITU_T

The newly added sis_i2c driver fails to link without the CRC_ITU_T
driver enabled:

drivers/input/touchscreen/sis_i2c.o: In function `sis_ts_irq_handler':
sis_i2c.c:(.text+0xc0): undefined reference to `crc_itu_t'

This adds a Kconfig select statement.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: a485cb037fe6 ("Input: add driver for SiS 9200 family I2C touchscreen controllers")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
4 years agoMerge branches 'misc' and 'rxe' into k.o/for-4.8-1
Doug Ledford [Thu, 4 Aug 2016 15:13:47 +0000 (11:13 -0400)]
Merge branches 'misc' and 'rxe' into k.o/for-4.8-1

4 years agoSoft RoCE driver
Moni Shoua [Thu, 16 Jun 2016 13:45:23 +0000 (16:45 +0300)]
Soft RoCE driver

Soft RoCE (RXE) - The software RoCE driver

ib_rxe implements the RDMA transport and registers to the RDMA core
device as a kernel verbs provider. It also implements the packet IO
layer. On the other hand ib_rxe registers to the Linux netdev stack
as a udp encapsulating protocol, in that case RDMA, for sending and
receiving packets over any Ethernet device.  This yields a RDMA
transport over the UDP/Ethernet network layer forming a RoCEv2
compatible device.

The configuration procedure of the Soft RoCE drivers requires
binding to any existing Ethernet network device. This is done with
/sys interface.

A userspace Soft RoCE library (librxe) provides user applications
the ability to run with Soft RoCE devices.  The use of rxe verbs ins
user space requires the inclusion of librxe as a device specifics
plug-in to libibverbs. librxe is packaged separately.

Architecture:

     +-----------------------------------------------------------+
     |                          Application                      |
     +-----------------------------------------------------------+
                            +-----------------------------------+
                            |             libibverbs            |
User                        +-----------------------------------+
                            +----------------+ +----------------+
                            | librxe         | | HW RoCE lib    |
                            +----------------+ +----------------+
+---------------------------------------------------------------+
     +--------------+                           +------------+
     | Sockets      |                           | RDMA ULP   |
     +--------------+                           +------------+
     +--------------+                  +---------------------+
     | TCP/IP       |                  | ib_core             |
     +--------------+                  +---------------------+
                             +------------+ +----------------+
Kernel                       | ib_rxe     | | HW RoCE driver |
                             +------------+ +----------------+
     +------------------------------------+
     | NIC driver                         |
     +------------------------------------+

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     +-----------------------------------------------------------+
     |                          Application                      |
     +-----------------------------------------------------------+
                            +-----------------------------------+
                            |             libibverbs            |
User                        +-----------------------------------+
                            +----------------+ +----------------+
                            | librxe         | | HW RoCE lib    |
                            +----------------+ +----------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
     +--------------+                           +------------+
     | Sockets      |                           | RDMA ULP   |
     +--------------+                           +------------+
     +--------------+                  +---------------------+
     | TCP/IP       |                  | ib_core             |
     +--------------+                  +---------------------+
                             +------------+ +----------------+
Kernel                       | ib_rxe     | | HW RoCE driver |
                             +------------+ +----------------+
     +------------------------------------+
     | NIC driver                         |
     +------------------------------------+
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Soft RoCE resources:

[1[ https://github.com/SoftRoCE/librxe-dev librxe - source code in
Github
[2] https://github.com/SoftRoCE/rxe-dev/wiki/rxe-dev:-Home - Soft RoCE
Wiki page
[3] https://github.com/SoftRoCE/librxe-dev - Soft RoCE userspace library

Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
4 years agodm raid: fix use of wrong status char during resynchronization
Heinz Mauelshagen [Wed, 3 Aug 2016 20:57:49 +0000 (22:57 +0200)]
dm raid: fix use of wrong status char during resynchronization

During a resynchronization, device status char 'a' is output on the raid
status line for every device of a RAID set.  It changes from 'a' to 'A'
(unless device failure) when the resynchronization completes.

Interrupting and restarting a resynchronization, by reloading the DM
table, erroneously lead to status char 'A'.

Fix this by avoiding setting the MD_RECOVERY_REQUESTED flag in
raid_preresume().

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
4 years agoMerge tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Thu, 4 Aug 2016 13:59:37 +0000 (09:59 -0400)]
Merge tag 'media/v4.8-5' of git://git./linux/kernel/git/mchehab/linux-media

Pull media DocBook removal and some fixups from Mauro Carvalho Chehab:

  - removal of the media DocBook (since it's all in Sphinx now)

  - videobuf2: Fix an allocation regression

  - a few fixes related to the CEC drivers

* tag 'media/v4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] cec: fix off-by-one memset
  [media] staging: add MEDIA_SUPPORT dependency
  [media] vivid: don't handle CEC_MSG_SET_STREAM_PATH
  [media] media: adv7180: Fix broken interrupt register access
  [media] vb2: Fix allocation size of dma_parms
  [media] vim2m: copy the other colorspace-related fields as well
  [media] adv7511: fix VIC autodetect
  doc-rst: Remove the media docbook

4 years agoMerge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 4 Aug 2016 13:14:38 +0000 (09:14 -0400)]
Merge tag 'modules-next-for-linus' of git://git./linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "The only interesting thing here is Jessica's patch to add
  ro_after_init support to modules.  The rest are all trivia"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  extable.h: add stddef.h so "NULL" definition is not implicit
  modules: add ro_after_init support
  jump_label: disable preemption around __module_text_address().
  exceptions: fork exception table content from module.h into extable.h
  modules: Add kernel parameter to blacklist modules
  module: Do a WARN_ON_ONCE() for assert module mutex not held
  Documentation/module-signing.txt: Note need for version info if reusing a key
  module: Invalidate signatures on force-loaded modules
  module: Issue warnings when tainting kernel
  module: fix redundant test.
  module: fix noreturn attribute for __module_put_and_exit()

4 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Thu, 4 Aug 2016 12:51:12 +0000 (08:51 -0400)]
Merge branch 'akpm' (patches from Andrew)

Merge even more updates from Andrew Morton:

 - dma-mapping API cleanup

 - a few cleanups and misc things

 - use jump labels in dynamic-debug

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  dynamic_debug: add jump label support
  jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABEL
  arm: jump label may reference text in __exit
  tile: support static_key usage in non-module __exit sections
  sparc: support static_key usage in non-module __exit sections
  powerpc: add explicit #include <asm/asm-compat.h> for jump label
  drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warning
  MAINTAINERS: update email and list of Samsung HW driver maintainers
  block: remove BLK_DEV_DAX config option
  samples/kretprobe: fix the wrong type
  samples/kretprobe: convert the printk to pr_info/pr_err
  samples/jprobe: convert the printk to pr_info/pr_err
  samples/kprobe: convert the printk to pr_info/pr_err
  dma-mapping: use unsigned long for dma_attrs
  media: mtk-vcodec: remove unused dma_attrs
  include/linux/bitmap.h: cleanup
  tree-wide: replace config_enabled() with IS_ENABLED()
  drivers/fpga/Kconfig: fix build failure

4 years agodynamic_debug: add jump label support
Jason Baron [Wed, 3 Aug 2016 20:46:39 +0000 (13:46 -0700)]
dynamic_debug: add jump label support

Although dynamic debug is often only used for debug builds, sometimes
its enabled for production builds as well.  Minimize its impact by using
jump labels.  This reduces the text section by 7000+ bytes in the kernel
image below.  It does increase data, but this should only be referenced
when changing the direction of the branches, and hence usually not in
cache.

     text     data     bss       dec     hex  filename
  8194852  4879776  925696  14000324  d5a0c4  vmlinux.pre
  8187337  4960224  925696  14073257  d6bda9  vmlinux.post

Link: http://lkml.kernel.org/r/d165b465e8c89bc582d973758d40be44c33f018b.1467837322.git.jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agojump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABEL
Jason Baron [Wed, 3 Aug 2016 20:46:36 +0000 (13:46 -0700)]
jump_label: remove bug.h, atomic.h dependencies for HAVE_JUMP_LABEL

The current jump_label.h includes bug.h for things such as WARN_ON().
This makes the header problematic for inclusion by kernel.h or any
headers that kernel.h includes, since bug.h includes kernel.h (circular
dependency).  The inclusion of atomic.h is similarly problematic.  Thus,
this should make jump_label.h 'includable' from most places.

Link: http://lkml.kernel.org/r/7060ce35ddd0d20b33bf170685e6b0fab816bdf2.1467837322.git.jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoarm: jump label may reference text in __exit
Jason Baron [Wed, 3 Aug 2016 20:46:33 +0000 (13:46 -0700)]
arm: jump label may reference text in __exit

The jump table can reference text found in an __exit section.  Thus,
instead of discarding it at build time, include EXIT_TEXT as part of
__init and it will be released when the system boots.

Link: http://lkml.kernel.org/r/60284113bb759121e8ae3e99af1535647e52123f.1467837322.git.jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agotile: support static_key usage in non-module __exit sections
Chris Metcalf [Wed, 3 Aug 2016 20:46:30 +0000 (13:46 -0700)]
tile: support static_key usage in non-module __exit sections

Previously, all the __exit sections were just dropped by the link phase.
However, if there are static_key (jump label) constructs in __exit
sections that are not modules, the link fails with the message:

   `.exit.text' referenced in section `__jump_table' of xxx.o:
   defined in discarded section `.exit.text' of xxx.o

Support this usage by keeping the .exit.text sections in the final image
if JUMP_LABEL is defined, then discarding them once initialization is
complete.

Link: http://lkml.kernel.org/r/bfd7c107c610c30e992868ebfe2a5d796a097464.1467837322.git.jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agosparc: support static_key usage in non-module __exit sections
Jason Baron [Wed, 3 Aug 2016 20:46:27 +0000 (13:46 -0700)]
sparc: support static_key usage in non-module __exit sections

The jump table can reference text found in an __exit section.  Thus,
instead of discarding it at build/link time, include EXIT_TEXT as part
of __init and release it at system boot time.

Without this patch the link fails with:

    `.exit.text' referenced in section `__jump_table' of xxx.o:
    defined in discarded section `.exit.text' of xxx.o

Link: http://lkml.kernel.org/r/d822da427ab07a02a394602eca687104ff682f83.1467837322.git.jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agopowerpc: add explicit #include <asm/asm-compat.h> for jump label
Jason Baron [Wed, 3 Aug 2016 20:46:24 +0000 (13:46 -0700)]
powerpc: add explicit #include <asm/asm-compat.h> for jump label

The stringify_in_c() macro may not be included. Make the dependency
explicit.

Link: http://lkml.kernel.org/r/564720c5328edd53c9d56db325be7215440eec3e.1467837322.git.jbaron@akamai.com
Signed-off-by: Jason Baron <jbaron@akamai.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Joe Perches <joe@perches.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Joe Perches <joe@perches.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agodrivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warning
Arnd Bergmann [Wed, 3 Aug 2016 20:46:21 +0000 (13:46 -0700)]
drivers/media/dvb-frontends/cxd2841er.c: avoid misleading gcc warning

The addition of jump label support in dynamic_debug caused an unexpected
warning in exactly one file in the kernel:

  drivers/media/dvb-frontends/cxd2841er.c: In function 'cxd2841er_tune_tc':
  include/linux/dynamic_debug.h:134:3: error: 'carrier_offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
     __dynamic_dev_dbg(&descriptor, dev, fmt, \
     ^~~~~~~~~~~~~~~~~
  drivers/media/dvb-frontends/cxd2841er.c:3177:11: note: 'carrier_offset' was declared here
    int ret, carrier_offset;
             ^~~~~~~~~~~~~~

The problem seems to be that the compiler gets confused by the extra
conditionals in static_branch_unlikely, to the point where it can no
longer keep track of which branches have already been taken, and it
doesn't realize that this variable is now always initialized when it
gets used.

I have done lots of randconfig kernel builds and could not find any
other file with this behavior, so I assume it's a rare enough glitch
that we don't need to change the jump label support but instead just
work around the warning in the driver.

To achieve that, I'm moving the check for the return value into the
switch() statement, which is an obvious transformation, but is enough to
un-confuse the compiler here.  The resulting code is not as nice to
read, but at least we retain the behavior of warning if it gets changed
to actually access an uninitialized carrier offset value in the future.

Link: http://lkml.kernel.org/r/20160713204342.1221511-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Abylay Ospan <aospan@netup.ru>
Cc: Sergey Kozlov <serjk@netup.ru>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Jason Baron <jbaron@akamai.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMAINTAINERS: update email and list of Samsung HW driver maintainers
Kamil Debski [Wed, 3 Aug 2016 20:46:18 +0000 (13:46 -0700)]
MAINTAINERS: update email and list of Samsung HW driver maintainers

Change my email address in the MAINTAINERS file.
Add new maintainers of selected Samsung HW drivers.

Link: http://lkml.kernel.org/r/1470060703-20423-1-git-send-email-k.debski@samsung.com
Signed-off-by: Kamil Debski <k.debski@samsung.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kamil Debski <kamil@wypas.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoblock: remove BLK_DEV_DAX config option
Ross Zwisler [Wed, 3 Aug 2016 20:46:15 +0000 (13:46 -0700)]
block: remove BLK_DEV_DAX config option

The functionality for block device DAX was already removed with commit
acc93d30d7d4 ("Revert "block: enable dax for raw block devices"")

However, we still had a config option hanging around that was always
disabled because it depended on CONFIG_BROKEN.  This config option was
introduced in commit 03cdadb04077 ("block: disable block device DAX by
default")

This change reverts that commit, removing the dead config option.

Link: http://lkml.kernel.org/r/20160729182314.6368-1-ross.zwisler@linux.intel.com
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agosamples/kretprobe: fix the wrong type
Huang Shijie [Wed, 3 Aug 2016 20:46:12 +0000 (13:46 -0700)]
samples/kretprobe: fix the wrong type

The regs_return_value() returns "unsigned long" or "long" value.  But the
retval is int type now, it may cause overflow, the log may becomes:

    [ 2911.078869] do_brk returned -2003877888 and took 4620 ns to execute

This patch converts the retval to "unsigned long" type, and fixes the
overflow issue.

Link: http://lkml.kernel.org/r/1464143083-3877-4-git-send-email-shijie.huang@arm.com
Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agosamples/kretprobe: convert the printk to pr_info/pr_err
Huang Shijie [Wed, 3 Aug 2016 20:46:09 +0000 (13:46 -0700)]
samples/kretprobe: convert the printk to pr_info/pr_err

We prefer to use the pr_* to print out the log now, this patch converts
the printk to pr_info.  In the error path, use the pr_err to replace the
printk.

Link: http://lkml.kernel.org/r/1464143083-3877-3-git-send-email-shijie.huang@arm.com
Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agosamples/jprobe: convert the printk to pr_info/pr_err
Huang Shijie [Wed, 3 Aug 2016 20:46:06 +0000 (13:46 -0700)]
samples/jprobe: convert the printk to pr_info/pr_err

We prefer to use the pr_* to print out the log now, this patch converts
the printk to pr_info.  In the error path, use the pr_err to replace the
printk.

Link: http://lkml.kernel.org/r/1464143083-3877-2-git-send-email-shijie.huang@arm.com
Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agosamples/kprobe: convert the printk to pr_info/pr_err
Huang Shijie [Wed, 3 Aug 2016 20:46:03 +0000 (13:46 -0700)]
samples/kprobe: convert the printk to pr_info/pr_err

We prefer to use the pr_* to print out the log now, this patch converts
the printk to pr_info.  In the error path, use the pr_err to replace the
printk.

Link: http://lkml.kernel.org/r/1464143083-3877-1-git-send-email-shijie.huang@arm.com
Signed-off-by: Huang Shijie <shijie.huang@arm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agodma-mapping: use unsigned long for dma_attrs
Krzysztof Kozlowski [Wed, 3 Aug 2016 20:46:00 +0000 (13:46 -0700)]
dma-mapping: use unsigned long for dma_attrs

The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomedia: mtk-vcodec: remove unused dma_attrs
Krzysztof Kozlowski [Wed, 3 Aug 2016 20:45:57 +0000 (13:45 -0700)]
media: mtk-vcodec: remove unused dma_attrs

The local variable dma_attrs is set but never read.

Link: http://lkml.kernel.org/r/1468399300-5399-1-git-send-email-k.kozlowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoinclude/linux/bitmap.h: cleanup
Andrew Morton [Wed, 3 Aug 2016 20:45:54 +0000 (13:45 -0700)]
include/linux/bitmap.h: cleanup

Remove two unneeded `else's.

Cc: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agotree-wide: replace config_enabled() with IS_ENABLED()
Masahiro Yamada [Wed, 3 Aug 2016 20:45:50 +0000 (13:45 -0700)]
tree-wide: replace config_enabled() with IS_ENABLED()

The use of config_enabled() against config options is ambiguous.  In
practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the
author might have used it for the meaning of IS_ENABLED().  Using
IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc.  makes the intention
clearer.

This commit replaces config_enabled() with IS_ENABLED() where possible.
This commit is only touching bool config options.

I noticed two cases where config_enabled() is used against a tristate
option:

 - config_enabled(CONFIG_HWMON)
  [ drivers/net/wireless/ath/ath10k/thermal.c ]

 - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE)
  [ drivers/gpu/drm/gma500/opregion.c ]

I did not touch them because they should be converted to IS_BUILTIN()
in order to keep the logic, but I was not sure it was the authors'
intention.

Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will Drewry <wad@chromium.org>
Cc: Nikolay Martynov <mar.kolya@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: James Cowgill <James.Cowgill@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Tony Wu <tung7970@gmail.com>
Cc: Huaitong Han <huaitong.han@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agodrivers/fpga/Kconfig: fix build failure
Sudip Mukherjee [Wed, 3 Aug 2016 20:45:46 +0000 (13:45 -0700)]
drivers/fpga/Kconfig: fix build failure

While building m32r allmodconfig the build is failing with the error:

  ERROR: "bad_dma_ops" [drivers/fpga/zynq-fpga.ko] undefined!

Xilinx Zynq FPGA is using DMA but there was no dependency while
building.

Link: http://lkml.kernel.org/r/1464346526-13913-1-git-send-email-sudipm.mukherjee@gmail.com
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Cc: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agopowerpc/mm: Move register_process_table() out of ppc_md
Michael Ellerman [Thu, 4 Aug 2016 05:32:06 +0000 (15:32 +1000)]
powerpc/mm: Move register_process_table() out of ppc_md

We want to initialise register_process_table() before ppc_md is setup,
so that it can be called as part of MMU init (at least on Radix ATM).

That no longer works because probe_machine() requires that ppc_md be
empty before it's called, and we now do probe_machine() much later.

So make register_process_table a global for now. It will probably move
into a mmu_radix_ops struct at some point in the future.

This was broken by me when applying commit 7025776ed1eb "powerpc/mm:
Move hash table ops to a separate structure" due to conflicts with other
patches.

Fixes: 7025776ed1eb ("powerpc/mm: Move hash table ops to a separate structure")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
4 years agopowerpc/perf: Fix incorrect event codes in power9-event-list
Madhavan Srinivasan [Sun, 31 Jul 2016 19:28:39 +0000 (00:58 +0530)]
powerpc/perf: Fix incorrect event codes in power9-event-list

These have been changed in the hardware, update Linux's version.

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
4 years agoALSA: hda - Fix headset mic detection problem for two dell machines
Hui Wang [Thu, 4 Aug 2016 07:28:04 +0000 (15:28 +0800)]
ALSA: hda - Fix headset mic detection problem for two dell machines

One of the machines has ALC255 on it, another one has ALC298 on it.

On the machine with the codec ALC298, it also has the speaker volume
problem, so we add the fixup chained to ALC298_FIXUP_SPK_VOLUME rather
than adding a group of pin definition in the pin quirk table, since
the speak volume problem does not happen on other machines yet.

Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
4 years agoRevert "ACPI / hotplug / PCI: Runtime resume bridge before rescan"
Linus Torvalds [Thu, 4 Aug 2016 02:20:22 +0000 (22:20 -0400)]
Revert "ACPI / hotplug / PCI: Runtime resume bridge before rescan"

This reverts commit 16468c783cb4cf72475dcda23fabecb4a4bb0e17.

Bisection showed that it was the root cause for a resume hang on a
bog-standard all-Intel laptop (Sony Vaio Pro 11), and reverting fixes
the hang.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge branches 'hfi1' and 'sge-limit' into k.o/for-4.8-2
Doug Ledford [Thu, 4 Aug 2016 01:51:20 +0000 (21:51 -0400)]
Merge branches 'hfi1' and 'sge-limit' into k.o/for-4.8-2

4 years agoMerge branch 'next' into for-linus
Dmitry Torokhov [Thu, 4 Aug 2016 01:16:10 +0000 (18:16 -0700)]
Merge branch 'next' into for-linus

Prepare second round of input updates for 4.8 merge window.

4 years agoIB/core: Support for CMA multicast join flags
Alex Vesker [Wed, 6 Jul 2016 13:36:35 +0000 (16:36 +0300)]
IB/core: Support for CMA multicast join flags

Added UCMA and CMA support for multicast join flags. Flags are
passed using UCMA CM join command previously reserved fields.
Currently supporting two join flags indicating two different
multicast JoinStates:

1. Full Member:
   The initiator creates the Multicast group(MCG) if it wasn't
   previously created, can send Multicast messages to the group
   and receive messages from the MCG.

2. Send Only Full Member:
   The initiator creates the Multicast group(MCG) if it wasn't
   previously created, can send Multicast messages to the group
   but doesn't receive any messages from the MCG.

   IB: Send Only Full Member requires a query of ClassPortInfo
       to determine if SM/SA supports this option. If SM/SA
       doesn't support Send-Only there will be no join request
       sent and an error will be returned.

   ETH: When Send Only Full Member is requested no IGMP join
will be sent.

Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
4 years agoIB/sa: Add cached attribute containing SM information to SA port
Alex Vesker [Wed, 6 Jul 2016 13:36:34 +0000 (16:36 +0300)]
IB/sa: Add cached attribute containing SM information to SA port

Added a new SA port attribute containing SM ClassPortInfo fields,
(ClassPortInfo fields: Table 126 IB Spec 1.3.). This is useful for
checking SM support for specific features. The attribute is cached
to avoid resending queries, caching is done when a successful
ClassPortInfo reply is received on the port. Invalidation of the
attribute is done on SM change events, SM re-registration events,
and SM LID change events. The fields in ClassPortInfo should not
change during SM runtime without an event.

Signed-off-by: Alex Vesker <valex@mellanox.com>
Reviewed by: Hal Rosenstock <hal@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
4 years agoIB/uverbs: Fix race between uverbs_close and remove_one
Jason Gunthorpe [Sun, 3 Jul 2016 12:28:18 +0000 (15:28 +0300)]
IB/uverbs: Fix race between uverbs_close and remove_one

Fixes an oops that might happen if uverbs_close races with
remove_one.

Both contexts may run ib_uverbs_cleanup_ucontext, it depends
on the flow.

Currently, there is no protection for a case that remove_one
didn't make the cleanup it runs to its end, the underlying
ib_device was freed then uverbs_close will call
ib_uverbs_cleanup_ucontext and OOPs.

Above might happen if uverbs_close deleted the file from the list
then remove_one didn't find it and runs to its end.

Fixes to protect against that case by a new cleanup lock so that
ib_uverbs_cleanup_ucontext will be called always before that
remove_one is ended.

Fixes: 35d4a0b63dc0 ("IB/uverbs: Fix race between ib_uverbs_open and remove_one")
Reported-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
4 years agoIB/mthca: Clean up error unwind flow in mthca_reset()
Markus Elfring [Sat, 23 Jul 2016 09:28:30 +0000 (11:28 +0200)]
IB/mthca: Clean up error unwind flow in mthca_reset()

The kfree() function was called in a few cases by the mthca_reset()
function during error handling even if the passed variables "bridge_header"
and "hca_header" contained a null pointer.

Adjust jump targets according to the Linux coding style convention.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
4 years agoIB/mthca: NULL arg to pci_dev_put is OK
Markus Elfring [Sat, 23 Jul 2016 08:05:12 +0000 (10:05 +0200)]
IB/mthca: NULL arg to pci_dev_put is OK

The pci_dev_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
4 years agoIB/hfi1: NULL arg to sc_return_credits is OK
Markus Elfring [Sat, 23 Jul 2016 06:30:52 +0000 (08:30 +0200)]
IB/hfi1: NULL arg to sc_return_credits is OK

The sc_return_credits() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
4 years agoIB/mlx4: Add diagnostic hardware counters
Mark Bloch [Tue, 19 Jul 2016 17:54:58 +0000 (20:54 +0300)]
IB/mlx4: Add diagnostic hardware counters

Expose IB diagnostic hardware counters.
The counters count IB events and are applicable for IB and RoCE.

The counters can be divided into two groups, per device and per port.
Device counters are always exposed.
Port counters are exposed only if the firmware supports per port counters.

rq_num_dup and sq_num_to are only exposed if we have firmware support
for them, if we do, we expose them per device and per port.
rq_num_udsdprd and num_cqovf are device only counters.

rq - denotes responder.
sq - denotes requester.

|-----------------------|---------------------------------------|
| Name | Description |
|-----------------------|---------------------------------------|
|rq_num_lle | Number of local length errors |
|-----------------------|---------------------------------------|
|sq_num_lle | number of local length errors |
|-----------------------|---------------------------------------|
|rq_num_lqpoe | Number of local QP operation errors |
|-----------------------|---------------------------------------|
|sq_num_lqpoe | Number of local QP operation errors |
|-----------------------|---------------------------------------|
|rq_num_lpe | Number of local protection errors |
|-----------------------|---------------------------------------|
|sq_num_lpe | Number of local protection errors |
|-----------------------|---------------------------------------|
|rq_num_wrfe | Number of CQEs with error |
|-----------------------|---------------------------------------|
|sq_num_wrfe | Number of CQEs with error |
|-----------------------|---------------------------------------|
|sq_num_mwbe | Number of Memory Window bind errors |
|-----------------------|---------------------------------------|
|sq_num_bre | Number of bad response errors |
|-----------------------|---------------------------------------|
|sq_num_rire | Number of Remote Invalid request |
| | errors |
|-----------------------|---------------------------------------|
|rq_num_rire | Number of Remote Invalid request |
| | errors |
|-----------------------|---------------------------------------|
|sq_num_rae | Number of remote access errors |
|-----------------------|---------------------------------------|
|rq_num_rae | Number of remote access errors |
|-----------------------|---------------------------------------|
|sq_num_roe | Number of remote operation errors |
|-----------------------|---------------------------------------|
|sq_num_tree | Number of transport retries exceeded |
| | errors |
|-----------------------|---------------------------------------|
|sq_num_rree | Number of RNR NAK retries exceeded |
| | errors |
|-----------------------|---------------------------------------|
|rq_num_rnr | Number of RNR NAKs sent |
|-----------------------|---------------------------------------|
|sq_num_rnr | Number of RNR NAKs received |
|-----------------------|---------------------------------------|
|rq_num_oos | Number of Out of Sequence requests |
| | received |
|-----------------------|---------------------------------------|
|sq_num_oos | Number of Out of Sequence NAKs |
| | received |
|-----------------------|---------------------------------------|
|rq_num_udsdprd | Number of UD packets silently |
| | discarded on the Receive Queue due to |
| | lack of receive descriptor |
|-----------------------|---------------------------------------|
|rq_num_dup | Number of duplicate requests received |
|-----------------------|---------------------------------------|
|sq_num_to | Number of time out received |
|-----------------------|---------------------------------------|
|num_cqovf | Number of CQ overflows |
|-----------------------|---------------------------------------|

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
4 years agonet/mlx4: Query performance and diagnostics counters
Mark Bloch [Tue, 19 Jul 2016 17:54:57 +0000 (20:54 +0300)]
net/mlx4: Query performance and diagnostics counters

Add a function to query diagnostics counters from the firmware.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
4 years agonet/mlx4: Add diagnostic counters capability bit
Mark Bloch [Tue, 19 Jul 2016 17:54:56 +0000 (20:54 +0300)]
net/mlx4: Add diagnostic counters capability bit

Add a bit that indicates if the firmware supports per port
diagnostic counters.

Signed-off-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>