sfrench/cifs-2.6.git
14 years ago[PATCH] lockdep: debug_show_all_locks & debug_show_held_locks vs. debug_locks
Jarek Poplawski [Thu, 22 Mar 2007 08:11:28 +0000 (00:11 -0800)]
[PATCH] lockdep: debug_show_all_locks & debug_show_held_locks vs. debug_locks

lockdep's data shouldn't be used when debug_locks == 0 because it's not
updated after this, so it's more misleading than helpful.

PS: probably lockdep's current-> fields should be reset after it turns
debug_locks off: so, after printing a bug report, but before return from
exported functions, but there are really a lot of these possibilities (e.g.
 after DEBUG_LOCKS_WARN_ON), so, something could be missed.  (Of course
direct use of this fields isn't recommended either.)

Reported-by: Folkert van Heusden <folkert@vanheusden.com>
Inspired-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] Make XFS workqueues nonfreezable
Rafael J. Wysocki [Thu, 22 Mar 2007 08:11:27 +0000 (00:11 -0800)]
[PATCH] Make XFS workqueues nonfreezable

Since freezable workqueues are broken in 2.6.21-rc
(cf. http://marc.theaimsgroup.com/?l=linux-kernel&m=116855740612755,
http://marc.theaimsgroup.com/?l=linux-kernel&m=117261312523921&w=2)
it's better to change the only user of them, which is XFS, to use "normal"
nonfreezable workqueues.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: David Chinner <dgc@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] lockdep: lockdep_depth vs. debug_locks
Jarek Poplawski [Thu, 22 Mar 2007 08:11:26 +0000 (00:11 -0800)]
[PATCH] lockdep: lockdep_depth vs. debug_locks

lockdep found a bug during a run of workqueue function - this could be also
caused by a bug from other code running simultaneously.

lockdep really shouldn't be used when debug_locks == 0!

Reported-by: Folkert van Heusden <folkert@vanheusden.com>
Inspired-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] fix extra BIOS invocation during resume
Pavel Machek [Thu, 22 Mar 2007 08:11:25 +0000 (00:11 -0800)]
[PATCH] fix extra BIOS invocation during resume

It causes extra moon icons blinking on x60, and breaks at least two other
systems.

During resume, we do not know that "reboot"/"shutdown" method was used, so
we assume "plaform" and call BIOS, anyway...

This is 2.6.21 material, and should fix 2 or 3 regressions from 2.6.20.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] NOMMU: make SYSV SHM nattch work correctly
David Howells [Thu, 22 Mar 2007 08:11:24 +0000 (00:11 -0800)]
[PATCH] NOMMU: make SYSV SHM nattch work correctly

Make the SYSV SHM nattch counter work correctly by forcing multiple VMAs to
be produced to represent MAP_SHARED segments, even if they overlap exactly.

Using this test program:

http://people.redhat.com/~dhowells/doshm.c

Run as:

doshm sysv

I can see nattch going from one before the patch:

# /doshm sysv
Command: sysv
shmid: 65536
memory: 0xc3700000
c0b00000-c0b04000 rw-p 00000000 00:00 0
c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
c3180000-c31dede4 r-xs 00000000 00:0b 14582179  /lib/libuClibc-0.9.28.so
c3520000-c352278c rw-p 00000000 00:0b 13763417  /doshm
c3584000-c35865e8 r-xs 00000000 00:0b 13763417  /doshm
c3588000-c358aa00 rw-p 00008000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
c3590000-c359b6c0 rw-p 00000000 00:00 0
c3620000-c3640000 rwxp 00000000 00:00 0
c3700000-c37fa000 rw-S 00000000 00:06 1411      /SYSV00000000 (deleted)
c3700000-c37fa000 rw-S 00000000 00:06 1411      /SYSV00000000 (deleted)
nattch 1

To two after the patch:

# /doshm sysv
Command: sysv
shmid: 0
memory: 0xc3700000
c0bb0000-c0bba788 r-xs 00000000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
c3180000-c31dede4 r-xs 00000000 00:0b 14582179  /lib/libuClibc-0.9.28.so
c3320000-c3340000 rwxp 00000000 00:00 0
c3530000-c35325e8 r-xs 00000000 00:0b 13763417  /doshm
c3534000-c353678c rw-p 00000000 00:0b 13763417  /doshm
c3538000-c353aa00 rw-p 00008000 00:0b 14582157  /lib/ld-uClibc-0.9.28.so
c3590000-c359b6c0 rw-p 00000000 00:00 0
c35a4000-c35a8000 rw-p 00000000 00:00 0
c3700000-c37fa000 rw-S 00000000 00:06 1369      /SYSV00000000 (deleted)
c3700000-c37fa000 rw-S 00000000 00:06 1369      /SYSV00000000 (deleted)
nattch 2

That's +1 to nattch for each shmat() made.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] NOMMU: supply get_unmapped_area() to fix NOMMU SYSV SHM
David Howells [Thu, 22 Mar 2007 08:11:23 +0000 (00:11 -0800)]
[PATCH] NOMMU: supply get_unmapped_area() to fix NOMMU SYSV SHM

Supply a get_unmapped_area() to fix NOMMU SYSV SHM support.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] FRV: fix unannotated variable declarations
David Howells [Thu, 22 Mar 2007 08:11:22 +0000 (00:11 -0800)]
[PATCH] FRV: fix unannotated variable declarations

Fix unannotated variable declarations.  Variables that have allocation
section annotations (such as __meminitdata) on their definitions must also
have them on their declarations as not doing so may affect the addressing
mode used by the compiler and may result in a linker error.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] i386: disable local apic timer via command line or dmi quirk
Thomas Gleixner [Thu, 22 Mar 2007 08:11:21 +0000 (00:11 -0800)]
[PATCH] i386: disable local apic timer via command line or dmi quirk

The local APIC timer stops to work in deeper C-States.  This is handled by
the ACPI code and a broadcast mechanism in the clockevents / tick managment
code.

Some systems do not expose the deeper C-States to the kernel, but switch
into deeper C-States behind the kernels back.  This delays the local apic
timer interrupts for ever and makes the systems unusable.

Add a command line option to disable the local apic timer and a dmi
quirk for known broken systems.

Andi sayeth:

  While not wrong by itself i think it is still better to use some heuristic
  -- like "has battery in ACPI" With the DMI table if the problem is more wide
  spread we will just continue extending it.

  But anyways should be ok now for .21 although I'm not really happy with
  it.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Grudgingly-acked-by: Andi Kleen <ak@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] swsusp: Fix SNAPSHOT_S2RAM ioctl
Rafael J. Wysocki [Thu, 22 Mar 2007 08:11:20 +0000 (00:11 -0800)]
[PATCH] swsusp: Fix SNAPSHOT_S2RAM ioctl

The SNAPSHOT_S2RAM ioctl does not disable the nonboot CPUs before entering
the suspend, although it should do this.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] Documentation/sysrq.txt: added short description for 'Q' (timerlist)
Johannes Weiner [Thu, 22 Mar 2007 08:11:18 +0000 (00:11 -0800)]
[PATCH] Documentation/sysrq.txt: added short description for 'Q' (timerlist)

I added the 'Q' to list. A short description in the `Ok, so what can I
use them for'-section, on when or why to use it would be nice!

Signed-off-by: Johannes Weiner <hannes-kernel@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] drivers/video/s3fb.c: fix a use-before-check
Adrian Bunk [Thu, 22 Mar 2007 08:11:16 +0000 (00:11 -0800)]
[PATCH] drivers/video/s3fb.c: fix a use-before-check

NULL checks should be before the first dereference.

Spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Ondrej Zajicek <santiago@crfreenet.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Fri, 23 Mar 2007 02:34:44 +0000 (19:34 -0700)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c/ds1374: Check workqueue creation status
  i2c-i801: Restore the device state before leaving
  i2c-amd8111: Missed cleanup

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 23 Mar 2007 02:34:09 +0000 (19:34 -0700)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [NETFILTER]: nat: avoid rerouting packets if only XFRM policy key changed
  [NETFILTER]: nf_conntrack_netlink: add missing dependency on NF_NAT
  [NET]: fix up misplaced inlines.
  [SCTP]: Correctly reset ssthresh when restarting association
  [BRIDGE]: Fix fdb RCU race
  [NET]: Fix fib_rules dump race
  [XFRM]: ipsecv6 needs a space when printing audit record.
  [X25] x25_forward_call(): fix NULL dereferences
  [SCTP]: Reset some transport and association variables on restart
  [SCTP]: Increment error counters on user requested HBs.
  [SCTP]: Clean up stale data during association restart
  [IrDA]: Calling ppp_unregister_channel() from process context
  [IrDA]: irttp_dup spin_lock initialisation
  [IrDA]: Delay needed when uploading firmware chunks

14 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Fri, 23 Mar 2007 02:33:52 +0000 (19:33 -0700)]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipoib: Fix thinko in packet length checks
  IPoIB: Fix use-after-free in path_rec_completion()
  IB/ehca: Make scaling code work without CPU hotplug
  RDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem()
  IB/ipath: Check return value of lookup_one_len
  IPoIB: Fix race in detaching from mcast group before attaching
  IPoIB/cm: Fix reaping of stale connections

14 years ago[PATCH] i386: clockevents fix breakage on Geode/Cyrix PIT implementations
Thomas Gleixner [Thu, 22 Mar 2007 21:46:18 +0000 (22:46 +0100)]
[PATCH] i386: clockevents fix breakage on Geode/Cyrix PIT implementations

The PIT has no dedicated mode for shut down. The only way to disable PIT
is to put it into one shot mode. AMD implementations of PIT on Geode
(also observed on Cyrix) are confused by an "empty" transition from
CLOCK_EVT_MODE_UNUSED to CLOCK_EVT_MODE_SHUTDOWN, which puts the PIT
into one shot mode momentarily.

I realized after staring helpless at the bug report
http://bugzilla.kernel.org/show_bug.cgi?id=8027 for quite a while, that
the only change, which might influence the bogomips calibration, is the
above transition during the PIT initialization.

Avoiding the unnecessary switch to oneshot and later to periodic mode
fixes the weird bogomips value and also the resulting slowness.

The fix is confirmed on OLPC and another Geode based box.

Note: this is unrelated to the Dual Core problem discussed here:
http://lkml.org/lkml/2007/3/17/48

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoIB/ipoib: Fix thinko in packet length checks
Michael S. Tsirkin [Wed, 21 Mar 2007 13:45:05 +0000 (15:45 +0200)]
IB/ipoib: Fix thinko in packet length checks

The packet length checks in ipoib are broken: we add 4 bytes (IPoIB
encapsulation header) when sending a packet, not 20 bytes (hardware
address length) to each packet.  Therefore, if connected mode is
enabled so that the interface MTU is larger than the multicast MTU,
IPoIB may end up trying to send too-long multicast packets.  For
example, multicast is broken if a message of size 2048 bytes is sent
on an interface with UD MTU 2048, because 2048 is bigger than the real
limit of 2044 but the code tests against the wrong limit of 2060.

This patch fixes <https://bugs.openfabrics.org/show_bug.cgi?id=418>,
submitted by Scott Weitzenkamp <sweitzen@cisco.com>.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
14 years agoIPoIB: Fix use-after-free in path_rec_completion()
Michael S. Tsirkin [Thu, 22 Mar 2007 21:40:16 +0000 (14:40 -0700)]
IPoIB: Fix use-after-free in path_rec_completion()

The connected mode code added the possibility that an neigh struct
gets freed in the list_for_each_entry() loop in path_rec_completion(),
which causes a use-after-free.  Fix this by changing to the _safe
variant of the list walking macro.

This was spotted by the Coverity checker (CID 1567).

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
14 years agoIB/ehca: Make scaling code work without CPU hotplug
Joachim Fenkes [Thu, 22 Mar 2007 15:52:13 +0000 (16:52 +0100)]
IB/ehca: Make scaling code work without CPU hotplug

eHCA scaling code must not depend on register_cpu_notifier() if
CONFIG_HOTPLUG_CPU is not set, so put all related code into #ifdefs.

Signed-off-by: Joachim Fenkes <fenkes@de.ibm.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
14 years agoRDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem()
Steve Wise [Thu, 22 Mar 2007 15:38:20 +0000 (10:38 -0500)]
RDMA/cxgb3: Handle build_phys_page_list() failure in iwch_reregister_phys_mem()

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
14 years agoIB/ipath: Check return value of lookup_one_len
Bryan O'Sullivan [Wed, 21 Mar 2007 22:18:14 +0000 (15:18 -0700)]
IB/ipath: Check return value of lookup_one_len

This fixes kernel.org bug 8003.

Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
14 years agoIPoIB: Fix race in detaching from mcast group before attaching
Sean Hefty [Mon, 19 Mar 2007 22:31:36 +0000 (14:31 -0800)]
IPoIB: Fix race in detaching from mcast group before attaching

There's a race between ipoib_mcast_leave() and ipoib_mcast_join_finish()
where we can try to detach from a multicast group before we've
attached to it.  Fix this by reordering the code in ipoib_mcast_leave
to free the multicast group first, which waits for the multicast
callback thread (which calls ipoib_mcast_join_finish()) to complete
before detaching from the group.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
14 years agoIPoIB/cm: Fix reaping of stale connections
Michael S. Tsirkin [Thu, 22 Mar 2007 21:32:09 +0000 (14:32 -0700)]
IPoIB/cm: Fix reaping of stale connections

The sense of the time_after_eq() test in ipoib_cm_stale_task() is
reversed so that only non-stale connections are reaped.  Fix this by
changing to time_before_eq().

Noticed by Pradeep Satyanarayana <pradeep@us.ibm.com>.

Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
14 years ago[NETFILTER]: nat: avoid rerouting packets if only XFRM policy key changed
Patrick McHardy [Thu, 22 Mar 2007 19:30:29 +0000 (12:30 -0700)]
[NETFILTER]: nat: avoid rerouting packets if only XFRM policy key changed

Currently NAT not only reroutes packets in the OUTPUT chain when the
routing key changed, but also if only the non-routing part of the
IPsec policy key changed. This breaks ping -I since it doesn't use
SO_BINDTODEVICE but IP_PKTINFO cmsg to specify the output device, and
this information is lost.

Only do full rerouting if the routing key changed, and just do a new
policy lookup with the old route if only the ports changed.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[NETFILTER]: nf_conntrack_netlink: add missing dependency on NF_NAT
Patrick McHardy [Thu, 22 Mar 2007 19:29:57 +0000 (12:29 -0700)]
[NETFILTER]: nf_conntrack_netlink: add missing dependency on NF_NAT

NF_CT_NETLINK=y, NF_NAT=m results in:

 LD      .tmp_vmlinux1
 net/built-in.o: dans la fonction « nfnetlink_parse_nat_proto »:
 nf_conntrack_netlink.c:(.text+0x28db9): référence indéfinie vers « nf_nat_proto_find_get »
 nf_conntrack_netlink.c:(.text+0x28dd6): référence indéfinie vers « nf_nat_proto_put »
 net/built-in.o: dans la fonction « ctnetlink_new_conntrack »:
 nf_conntrack_netlink.c:(.text+0x29959): référence indéfinie vers « nf_nat_setup_info »
 nf_conntrack_netlink.c:(.text+0x29b35): référence indéfinie vers « nf_nat_setup_info »
 nf_conntrack_netlink.c:(.text+0x29cf7): référence indéfinie vers « nf_nat_setup_info »
 nf_conntrack_netlink.c:(.text+0x29de2): référence indéfinie vers « nf_nat_setup_info »
 make: *** [.tmp_vmlinux1] Erreur 1

Reported by Kevin Baradon <kevin.baradon@gmail.com>

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[NET]: fix up misplaced inlines.
Dave Jones [Thu, 22 Mar 2007 19:27:49 +0000 (12:27 -0700)]
[NET]: fix up misplaced inlines.

Turning up the warnings on gcc makes it emit warnings
about the placement of 'inline' in function declarations.
Here's everything that was under net/

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[SCTP]: Correctly reset ssthresh when restarting association
Vlad Yasevich [Thu, 22 Mar 2007 19:26:25 +0000 (12:26 -0700)]
[SCTP]: Correctly reset ssthresh when restarting association

Reset ssthresh to the correct value (peer's a_rwnd) when restarting
association.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[BRIDGE]: Fix fdb RCU race
Patrick McHardy [Thu, 22 Mar 2007 19:25:20 +0000 (12:25 -0700)]
[BRIDGE]: Fix fdb RCU race

br_fdb_get use atomic_inc to increase the refcount of an element found
on a RCU protected list, which can lead to the following race:

CPU0 CPU1

br_fdb_get:   rcu_read_lock
__br_fdb_get: find element
fdb_delete:   hlist_del_rcu
      br_fdb_put
br_fdb_put:   atomic_dec_and_test
      call_rcu(fdb_rcu_free) br_fdb_get:   atomic_inc
      rcu_read_unlock
fdb_rcu_free: kmem_cache_free

Use atomic_inc_not_zero instead.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[NET]: Fix fib_rules dump race
Patrick McHardy [Thu, 22 Mar 2007 19:24:38 +0000 (12:24 -0700)]
[NET]: Fix fib_rules dump race

fib_rules_dump needs to use list_for_each_entry_rcu to protect against
concurrent changes to the rules list.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoi2c/ds1374: Check workqueue creation status
Cyrill V. Gorcunov [Thu, 22 Mar 2007 18:49:01 +0000 (19:49 +0100)]
i2c/ds1374: Check workqueue creation status

Check if workqueue creation failed.  Further usage of NULL pointed
workqueue is not good I guess ;)

Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agoi2c-i801: Restore the device state before leaving
Jean Delvare [Thu, 22 Mar 2007 18:49:01 +0000 (19:49 +0100)]
i2c-i801: Restore the device state before leaving

Restore the original host configuration on driver unload and on
suspend. In particular this returns the SMBus master in I2C mode if it
was originally in I2C mode, which should help with suspend/resume if
the BIOS expects to find the SMBus master in I2C mode.

This fixes bug #6449 (for real this time.)
http://bugzilla.kernel.org/show_bug.cgi?id=6449

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Tommi Kyntola <tommi.kyntola@ray.fi>
14 years agoi2c-amd8111: Missed cleanup
Jean Delvare [Thu, 22 Mar 2007 18:49:00 +0000 (19:49 +0100)]
i2c-amd8111: Missed cleanup

I missed one cleanup in my previous patch.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Thu, 22 Mar 2007 02:45:50 +0000 (19:45 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Fix wrong /proc/iomem on SGI Altix
  [IA64] Altix: ioremap vga_console_iobase
  [IA64] Fix typo/thinko in crash.c
  [IA64] Fix get_model_name() for mixed cpu type systems
  [IA64] min_low_pfn and max_low_pfn calculation fix

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Thu, 22 Mar 2007 02:45:32 +0000 (19:45 -0700)]
Merge /pub/scm/linux/kernel/git/herbert/crypto-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  [CRYPTO] tcrypt: Fix error checking for comp allocation
  [CRYPTO] doc: Fix typo in hash example
  [CRYPTO] api: scatterwalk_copychunks() fails to advance through scatterlist

14 years ago[CRYPTO] tcrypt: Fix error checking for comp allocation
Sebastian Siewior [Tue, 20 Mar 2007 21:58:43 +0000 (08:58 +1100)]
[CRYPTO] tcrypt: Fix error checking for comp allocation

This patch fixes loading the tcrypt module while deflate isn't available
at all (isn't build).

Signed-off-by: Sebastian Siewior <linux-crypto@ml.breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
14 years ago[CRYPTO] doc: Fix typo in hash example
Johannes Schlumberger [Tue, 20 Mar 2007 21:55:58 +0000 (08:55 +1100)]
[CRYPTO] doc: Fix typo in hash example

there is a tiny bug in Documentation/crypto/api-intro.txt.
The file has the following example code:

struct scatterlist sg[2];
[...]
if (crypto_hash_digest(&desc, &sg, 2, result))

which does not match the declaration of crypto_hash_digest() in
include/linux/crypto.h.

(static inline int crypto_hash_digest(struct hash_desc *desc,
struct scatterlist *sg, unsigned int nbytes, u8 *out)

The code in the example passes the address of a pointer (an array actually) as
the second argument, while the function expects the pointer itself.

I have attached a patch to fix this.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
14 years ago[CRYPTO] api: scatterwalk_copychunks() fails to advance through scatterlist
J. Bruce Fields [Tue, 20 Mar 2007 21:50:12 +0000 (08:50 +1100)]
[CRYPTO] api: scatterwalk_copychunks() fails to advance through scatterlist

In the loop in scatterwalk_copychunks(), if walk->offset is zero,
then scatterwalk_pagedone rounds that up to the nearest page boundary:

walk->offset += PAGE_SIZE - 1;
walk->offset &= PAGE_MASK;

which is a no-op in this case, so we don't advance to the next element
of the scatterlist array:

if (walk->offset >= walk->sg->offset + walk->sg->length)
scatterwalk_start(walk, sg_next(walk->sg));

and we end up copying the same data twice.

It appears that other callers of scatterwalk_{page}done first advance
walk->offset, so I believe that's the correct thing to do here.

This caused a bug in NFS when run with krb5p security, which would
cause some writes to fail with permissions errors--for example, writes
of less than 8 bytes (the des blocksize) at the start of a file.

A git-bisect shows the bug was originally introduced by
5c64097aa0f6dc4f27718ef47ca9a12538d62860, first in 2.6.19-rc1.

Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
14 years ago[IA64] Fix wrong /proc/iomem on SGI Altix
Bernhard Walle [Wed, 14 Mar 2007 18:07:47 +0000 (19:07 +0100)]
[IA64] Fix wrong /proc/iomem on SGI Altix

In sn_io_slot_fixup(), the parent is re-set from the bus to
io(port|mem)_resource because the address is changed in a way that it's not
child of the bus any more.

However, only the root is set but not the parent/child/sibling relationship in
the resource tree which causes 'cat /proc/iomem' to stop after this memory
area. Depding on the poition in the tree the iomem may be nearly completely
empty.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Acked-by: John Keller <jpk@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
14 years ago[IA64] Altix: ioremap vga_console_iobase
John Keller [Tue, 20 Mar 2007 18:50:10 +0000 (13:50 -0500)]
[IA64] Altix: ioremap vga_console_iobase

When booting an SN system without specifing a console
(i.e., no "console=" on boot line), the system will hang during
boot at the point where /sbin/init is run.

The problem is that vga_console_iobase is not converted to a
virtual address before storing in io_space[0].mmio_base.
The conversion was happening in sn_scan_pcdp(), but not in
setup_vga_console().

Signed-off-by: John Keller <jpk@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
14 years ago[IA64] Fix typo/thinko in crash.c
Jay Lan [Tue, 20 Mar 2007 20:47:47 +0000 (13:47 -0700)]
[IA64] Fix typo/thinko in crash.c

Clearly should be checking for "val == DIE_INIT_SLAVE_ENTER".

Signed-off-by: Jay Lan <jlan@sgi.com>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Tony Luck <tony.luck@intel.com>
14 years ago[IA64] Fix get_model_name() for mixed cpu type systems
Jack Steiner [Mon, 12 Mar 2007 13:07:49 +0000 (08:07 -0500)]
[IA64] Fix get_model_name() for mixed cpu type systems

If a system consists of mixed processor types, kmalloc()
can be called before the per-cpu data page is initialized.
If the slab contains sufficient memory, then kmalloc() works
ok. However, if the slabs are empty, slab calls the memory
allocator. This requires per-cpu data (NODE_DATA()) & the
cpu dies.

Also noted by Russ Anderson who had a very similar patch.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
14 years ago[IA64] min_low_pfn and max_low_pfn calculation fix
Zou Nan hai [Tue, 20 Mar 2007 20:41:57 +0000 (13:41 -0700)]
[IA64] min_low_pfn and max_low_pfn calculation fix

We have seen bad_pte_print when testing crashdump on an SN machine in
recent 2.6.20 kernel.  There are tons of bad pte print (pfn < max_low_pfn)
reports when the crash kernel boots up, all those reported bad pages
are inside initmem range; That is because if the crash kernel code and
data happens to be at the beginning of the 1st node. build_node_maps in
discontig.c will bypass reserved regions with filter_rsvd_memory. Since
min_low_pfn is calculated in build_node_map, so in this case, min_low_pfn
will be greater than kernel code and data.

Because pages inside initmem are freed and reused later, we saw
pfn_valid check fail on those pages.

I think this theoretically happen on a normal kernel. When I check
min_low_pfn and max_low_pfn calculation in contig.c and discontig.c.
I found more issues than this.

1. min_low_pfn and max_low_pfn calculation is inconsistent between
contig.c and discontig.c,
min_low_pfn is calculated as the first page number of boot memmap in
contig.c (Why? Though this may work at the most of the time, I don't
think it is the right logic). It is calculated as the lowest physical
memory page number bypass reserved regions in discontig.c.
max_low_pfn is calculated include reserved regions in contig.c. It is
calculated exclude reserved regions in discontig.c.

2. If kernel code and data region is happen to be at the begin or the
end of physical memory, when min_low_pfn and max_low_pfn calculation is
bypassed kernel code and data, pages in initmem will report bad.

3. initrd is also in reserved regions, if it is at the begin or at the
end of physical memory, kernel will refuse to reuse the memory. Because
the virt_addr_valid check in free_initrd_mem.

So it is better to fix and clean up those issues.
Calculate min_low_pfn and max_low_pfn in a consistent way.

Signed-off-by: Zou Nan hai <nanhai.zou@intel.com>
Acked-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
14 years ago[XFRM]: ipsecv6 needs a space when printing audit record.
Joy Latten [Tue, 20 Mar 2007 01:47:26 +0000 (18:47 -0700)]
[XFRM]: ipsecv6 needs a space when printing audit record.

This patch adds a space between printing of the src and dst ipv6 addresses.
Otherwise, audit or other test tools may fail to process the audit
record properly because they cannot find the dst address.

Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[X25] x25_forward_call(): fix NULL dereferences
Adrian Bunk [Tue, 20 Mar 2007 00:04:56 +0000 (17:04 -0700)]
[X25] x25_forward_call(): fix NULL dereferences

This patch fixes two NULL dereferences spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[SCTP]: Reset some transport and association variables on restart
Vlad Yasevich [Tue, 20 Mar 2007 00:02:30 +0000 (17:02 -0700)]
[SCTP]: Reset some transport and association variables on restart

If the association has been restarted, we need to reset the
transport congestion variables as well as accumulated error
counts and CACC variables.  If we do not, the association
will use the wrong values and may terminate prematurely.

This was found with a scenario where the peer restarted
the association when lksctp was in the last HB timeout for
its association.  The restart happened, but the error counts
have not been reset and when the timeout occurred, a newly
restarted association was terminated due to excessive
retransmits.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[SCTP]: Increment error counters on user requested HBs.
Vlad Yasevich [Tue, 20 Mar 2007 00:02:03 +0000 (17:02 -0700)]
[SCTP]: Increment error counters on user requested HBs.

2960bis states (Section 8.3):

   D) Request an on-demand HEARTBEAT on a specific destination transport
      address of a given association.

   The endpoint should increment the respective error counter of the
   destination transport address each time a HEARTBEAT is sent to that
   address and not acknowledged within one RTO.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[SCTP]: Clean up stale data during association restart
Vlad Yasevich [Tue, 20 Mar 2007 00:01:17 +0000 (17:01 -0700)]
[SCTP]: Clean up stale data during association restart

During association restart we may have stale data sitting
on the ULP queue waiting for ordering or reassembly.  This
data may cause severe problems if not cleaned up.  In particular
stale data pending ordering may cause problems with receive
window exhaustion if our peer has decided to restart the
association.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[IrDA]: Calling ppp_unregister_channel() from process context
Samuel Ortiz [Sat, 17 Mar 2007 03:31:03 +0000 (20:31 -0700)]
[IrDA]: Calling ppp_unregister_channel() from process context

We need to call ppp_unregister_channel() when IrNET disconnects, and this
must be done from a process context.

Bug reported and patch tested by Guennadi Liakhovetski.

Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[IrDA]: irttp_dup spin_lock initialisation
G. Liakhovetski [Sat, 17 Mar 2007 03:30:03 +0000 (20:30 -0700)]
[IrDA]: irttp_dup spin_lock initialisation

Without this initialization one gets

kernel BUG at kernel/rtmutex_common.h:80!

This patch should also be included in the -stable kernel.

Signed-off-by: G. Liakhovetski <gl@dsa-ac.de>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[IrDA]: Delay needed when uploading firmware chunks
Nigel Williams [Sat, 17 Mar 2007 03:28:36 +0000 (20:28 -0700)]
[IrDA]: Delay needed when uploading firmware chunks

With 42101001.sb firmwares, we need a 10 ms delay between firmware chunks
upload on irda-usb.

Patch from Nigel Williams <nigelw@elder-gods.net>
Signed-off-by: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Tue, 20 Mar 2007 03:20:56 +0000 (20:20 -0700)]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: store-init needs trailing membar.

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Tue, 20 Mar 2007 03:14:23 +0000 (20:14 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: new Novatel device ids for option driver
  USB: berry_charge: correct dbg string for second magic command
  usblp: quirk flag and device entry for Seiko Epson M129C printer
  airprime: USB ID for Novatel EV620 mini PCI-E card
  USB: necessary update for mos7720 driver
  USB: RAZR v3i unusual_devs
  USB: two more device ids for dm9601 usbnet driver
  USB: fix usb-serial regression

14 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 20 Mar 2007 03:13:56 +0000 (20:13 -0700)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Export except_vec_vi_{mori,lui,ori} as text symbols.
  [MIPS] mips-boards: More liberal check for mips-board console
  [MIPS] Misc fixes for plat_irq_dispatch functions
  [MIPS] Qemu: Fix Symmetric Uniprocessor support.
  [MIPS] VI: TRACE_IRQS_OFF clobbers $v0, so save & restore around call.

14 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 20 Mar 2007 03:12:25 +0000 (20:12 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_ixp4xx_cf: fix interrupt
  pata_ixp4xx_cf: fix oops on detach
  libata: kernel-doc fix
  sata_inic162x: kill double region requests
  drivers/ata/Kconfig: PATA_SCC depends on wrong platform
  sata_sil24: Add Adaptec 1220SA PCI ID
  libata: don't whine if ->prereset() returns -ENOENT

14 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 20 Mar 2007 03:05:16 +0000 (20:05 -0700)]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4264/1: ldrex/strex syntax errors with recent compilers
  [ARM] Fix breakage caused by 72486f1f8f0a2bc828b9d30cf4690cf2dd6807fc

14 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Tue, 20 Mar 2007 03:04:26 +0000 (20:04 -0700)]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] zcrypt: fix possible race when unloading zcrypt driver modules
  [S390] zcrypt: fix possible dead lock in AP bus module
  [S390] Wire up sys_utimes.
  [S390] reboot from and dump to SCSI under z/VM fails.
  [S390] Wire up compat_sys_epoll_pwait.
  [S390] strlcpy is smart enough
  [S390] memory detection: fix off by one bug.
  [S390] cio: qdio slsb setup

14 years agoUSB: new Novatel device ids for option driver
Greg Kroah-Hartman [Mon, 19 Mar 2007 20:39:51 +0000 (13:39 -0700)]
USB: new Novatel device ids for option driver

This moves all of the Novatel device ids to the option driver, where
they belong.

Thanks to Novatel for providing a list of all supported devices.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years ago[SPARC64]: store-init needs trailing membar.
David S. Miller [Mon, 19 Mar 2007 20:27:33 +0000 (13:27 -0700)]
[SPARC64]: store-init needs trailing membar.

The manual says that it is required and we actually have crash reports
where loads see stale data due to not having membars here.

In one case the networking does:

memset(skb, 0, offsetof(struct sk_buff, truesize));

and then some code later checks skb->nohdr for zero, but it's still
the value that was there before the memset().

Note that arch/sparc64/lib/xor.S already got this right.

Signed-off-by: David S. Miller <davem@davemloft.net>
14 years ago[MIPS] Export except_vec_vi_{mori,lui,ori} as text symbols.
Ralf Baechle [Mon, 19 Mar 2007 15:29:39 +0000 (15:29 +0000)]
[MIPS] Export except_vec_vi_{mori,lui,ori} as text symbols.

Otherwise objdump will screw up disassembly.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years ago[MIPS] mips-boards: More liberal check for mips-board console
Thiemo Seufer [Mon, 19 Mar 2007 00:05:06 +0000 (00:05 +0000)]
[MIPS] mips-boards: More liberal check for mips-board console

Allows overriding the MALTA/ATLAS/etc. default console setting with
non-serial console devices.

Signed-Off-By: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years ago[MIPS] Misc fixes for plat_irq_dispatch functions
Thiemo Seufer [Mon, 19 Mar 2007 00:13:37 +0000 (00:13 +0000)]
[MIPS] Misc fixes for plat_irq_dispatch functions

 o adds missing ST0_IM masks, which caused the logging of valid interrupts
   as spurious
 o stops pnx8550 to log every interrupt as spurious
 o adds cause register masks for ip22/ip32, which caused handling of masked
   interrupts
 o removes some superfluous parentheses in the SNI interrupt code

Signed-Off-By: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years ago[MIPS] Qemu: Fix Symmetric Uniprocessor support.
Atsushi Nemoto [Sat, 17 Mar 2007 16:01:39 +0000 (01:01 +0900)]
[MIPS] Qemu: Fix Symmetric Uniprocessor support.

Might be useful for SMP debugging.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
[Rewritten Kconfig bits to deal better fit in the usual pattern of doing
things - Ralf]

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years ago[MIPS] VI: TRACE_IRQS_OFF clobbers $v0, so save & restore around call.
Ralf Baechle [Sat, 17 Mar 2007 16:21:28 +0000 (16:21 +0000)]
[MIPS] VI: TRACE_IRQS_OFF clobbers $v0, so save & restore around call.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoUSB: berry_charge: correct dbg string for second magic command
Ken L Johnson [Fri, 16 Mar 2007 16:17:31 +0000 (10:17 -0600)]
USB: berry_charge: correct dbg string for second magic command

I was testing the berry_charge module with my Blackberry 8700c and had
great success, thanks. Looking at the code for my own learning I noticed
the following cut and paste error... just a nit.

Signed-off-by: Ken L Johnson <ken@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agousblp: quirk flag and device entry for Seiko Epson M129C printer
Alan Stern [Fri, 16 Mar 2007 19:53:07 +0000 (15:53 -0400)]
usblp: quirk flag and device entry for Seiko Epson M129C printer

This patch (as872) adds a device table entry and a new quirk flag to
the usblp driver for the Seiko Epson Receipt printer.  This printer
returns Vendor-Specific values for bInterfaceClass and
bInterfaceSubClass, but the bInterfaceProtocol value is valid and it
works with usblp.  The new quirks flag tells the driver to ignore the
Class and SubClass values in the interface descriptor.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoairprime: USB ID for Novatel EV620 mini PCI-E card
Mark Glines [Wed, 14 Mar 2007 18:55:28 +0000 (11:55 -0700)]
airprime: USB ID for Novatel EV620 mini PCI-E card

Add an ID to recognise the Novatel EV620 wireless adapter.
http://www.novatelwireless.com/products/expedite/ev620.html

It looks like a mini PCI-Express adapter.  The mPCIE connector includes USB
pins... the card shows up to the system as a USB device, and powers itself
from the PCI bus.

The card I have isn't activated yet, so I can't get a PPP session up yet, but
I have tested basic serial communication successfully in both 2.6.18 and
2.6.20 kernels, once the product ID was added.  (the driver changed quite a
bit between the two revs.)  In both drivers, it responds to AT commands and
such.

Signed-off-by: Mark Glines <mark@glines.org>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: necessary update for mos7720 driver
Oliver Neukum [Wed, 14 Mar 2007 10:11:08 +0000 (11:11 +0100)]
USB: necessary update for mos7720 driver

these devices have a shared interrupt endpoint. For serialcore to pass
an interrupt endpoint to a subdriver, the subdriver must define and
_export_ a fitting callback. The mos7720 driver failed to do so. This led
invariably to an oops upon open. This patch fixes it. The driver is useless
without it. Please try to get this into 2.6.21 and the stable kernels that
have this driver.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: RAZR v3i unusual_devs
Pete Zaitcev [Sat, 10 Mar 2007 23:17:16 +0000 (15:17 -0800)]
USB: RAZR v3i unusual_devs

This adds an unusual_devs entry for the Motorola RAZR 3vi.

From: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: two more device ids for dm9601 usbnet driver
Jon Dowland [Sun, 11 Mar 2007 20:03:03 +0000 (20:03 +0000)]
USB: two more device ids for dm9601 usbnet driver

This patch for the linux-usb-devel tree adds two more
product ids to the dm9601 driver. These ids were found on
rebadged dm9601 devices in the wild.

Signed-off-by: Jon Dowland <jon@alcopop.org>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoUSB: fix usb-serial regression
Jim Radford [Tue, 13 Mar 2007 15:30:50 +0000 (08:30 -0700)]
USB: fix usb-serial regression

This patch reverts d9a7ecacac5f8274d2afce09aadcf37bdb42b93a since it
breaks drivers that need to access the ->port[] array in shutdown
(most of them).

Signed-Off: Jim Radford <radford@blackbean.org>
Acked-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agopata_ixp4xx_cf: fix interrupt
Alessandro Zummo [Sun, 18 Mar 2007 14:23:33 +0000 (15:23 +0100)]
pata_ixp4xx_cf: fix interrupt

 As per compact flash specifications, the default
 irq mode upon cf insertion is pulse mode. this patch fixes
 the driver to cope with that.

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
14 years agopata_ixp4xx_cf: fix oops on detach
Tejun Heo [Sat, 17 Mar 2007 19:55:23 +0000 (04:55 +0900)]
pata_ixp4xx_cf: fix oops on detach

pata_ixp4xx_cf dodged dont-clear-drvdata-in-LLD bombing run as it used
platform_set_drvdata() instead of dev_set_drvdata().  This causes OOPS
on devres host release.  Kill it.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
14 years agolibata: kernel-doc fix
Randy Dunlap [Sat, 17 Mar 2007 02:55:47 +0000 (19:55 -0700)]
libata: kernel-doc fix

Warning(linux-2621-rc3g7/drivers/ata/libata-core.c:842): No description found for parameter 'unknown'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
14 years agosata_inic162x: kill double region requests
Tejun Heo [Thu, 15 Mar 2007 16:59:42 +0000 (01:59 +0900)]
sata_inic162x: kill double region requests

Regions are requested twice during initialization causing the second
one to fail.  This is regression introduced during iomap conversion.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
14 years agodrivers/ata/Kconfig: PATA_SCC depends on wrong platform
Akira Iguchi [Thu, 15 Mar 2007 05:32:58 +0000 (14:32 +0900)]
drivers/ata/Kconfig: PATA_SCC depends on wrong platform

PATA_SCC depends on PPC_CELLEB. (not PPC_IBM_CELL_BLADE)

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
14 years agosata_sil24: Add Adaptec 1220SA PCI ID
Jamie Clark [Tue, 13 Mar 2007 04:48:00 +0000 (12:48 +0800)]
sata_sil24: Add Adaptec 1220SA PCI ID

Add Adaptec 1220SA (SIL3132) to devices claimed by sata_sil24
Patch generated against 2.6.20.2

Signed-off-by: Jamie Clark <jclark@metaparadigm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
14 years agolibata: don't whine if ->prereset() returns -ENOENT
Tejun Heo [Mon, 12 Mar 2007 08:24:08 +0000 (17:24 +0900)]
libata: don't whine if ->prereset() returns -ENOENT

->prereset() returns -ENOENT to tell libata that the port is empty and
reset sequencing should be stopped.  This is not an error condition.
Update ata_eh_reset() such that it sets device classes to ATA_DEV_NONE
and return success in on -ENOENT.  This makes spurious error message
go away.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
14 years ago[S390] zcrypt: fix possible race when unloading zcrypt driver modules
Ralph Wuerthner [Mon, 19 Mar 2007 12:19:19 +0000 (13:19 +0100)]
[S390] zcrypt: fix possible race when unloading zcrypt driver modules

Move try_module_get() call into spin protected block to prevent zcrypt
driver module unload while submitting a request to driver.

Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] zcrypt: fix possible dead lock in AP bus module
Ralph Wuerthner [Mon, 19 Mar 2007 12:19:14 +0000 (13:19 +0100)]
[S390] zcrypt: fix possible dead lock in AP bus module

AP bus module uses bus_for_each_dev() in software interrupt context to
poll for completed requests which might cause dead locks. Solution: use
private AP device list for polling in software interrupt context.

Signed-off-by: Ralph Wuerthner <rwuerthn@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] Wire up sys_utimes.
Heiko Carstens [Mon, 19 Mar 2007 12:19:07 +0000 (13:19 +0100)]
[S390] Wire up sys_utimes.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] reboot from and dump to SCSI under z/VM fails.
Michael Holzheu [Mon, 19 Mar 2007 12:19:03 +0000 (13:19 +0100)]
[S390] reboot from and dump to SCSI under z/VM fails.

We used wrong length values for ipl and dump hardware structures.
Since z/VM checks the ipl parameters more accurately than LPAR,
the operations fail there.

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] Wire up compat_sys_epoll_pwait.
Heiko Carstens [Mon, 19 Mar 2007 12:18:56 +0000 (13:18 +0100)]
[S390] Wire up compat_sys_epoll_pwait.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] strlcpy is smart enough
Jean Delvare [Mon, 19 Mar 2007 12:18:53 +0000 (13:18 +0100)]
[S390] strlcpy is smart enough

strlcpy already accounts for the trailing zero in its length
computation, so there is no need to substract one to the buffer size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] memory detection: fix off by one bug.
Heiko Carstens [Mon, 19 Mar 2007 12:18:50 +0000 (13:18 +0100)]
[S390] memory detection: fix off by one bug.

diag 260 returns the address of the last addressable byte and not the
size of memory. Since we want the size we have to add 1 to the return
value.
Disable diag 260 for non z/Arch mode since it doesn't work there
anyway.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years ago[S390] cio: qdio slsb setup
Ursula Braun [Mon, 19 Mar 2007 12:18:12 +0000 (13:18 +0100)]
[S390] cio: qdio slsb setup

Make sure set_slsb problems are handled correctly in
qdio_do_qdio_fill_input() and qdio_do_qdio_fill_output.

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Sun, 18 Mar 2007 23:07:27 +0000 (16:07 -0700)]
Merge /pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  serial: Fix sh-sci break interrupt/sysrq handling.
  sh: Fix bogus regs pointer in do_IRQ().
  sh: Fix SH-3 cache entry_mask and way_size calculation.
  sh: Convert struct ioctls to static defines.
  sh: Define missing __NR_readahead.
  sh: Fix PCI BAR address-space wraparound.

14 years ago[PATCH] Fix build error due to not including <linux/errno.h>
Ralf Baechle [Sun, 18 Mar 2007 12:58:08 +0000 (12:58 +0000)]
[PATCH] Fix build error due to not including <linux/errno.h>

Since d9a9cdfb078d755e648d53ec25b7370f84ee5729 <linux/sysfs.h> is using
ENOSYS without including <linux/errno.h> if CONFIG_SYSFS is disabled.

Fixed by including <linux/errno.h>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] tty: Fix two reported pid leaks
Eric W. Biederman [Sun, 18 Mar 2007 18:45:44 +0000 (12:45 -0600)]
[PATCH] tty: Fix two reported pid leaks

These leaks were reported by: Catalin Marinas <catalin.marians@gmail.com>
and I have been able to very by inspection they are possible.

When converting tty_io.c to store pids as struct pid pointers instead
of pid_t values it appears I overlooked two places where we stop using
the pid value.  The very obvious one is in do_tty_hangup, and the one
the less obvious one in __proc_set_tty.

When looking into the code __proc_set_tty only has pids that need to
be put because of failures of other parts of the code to properly
perform hangup processing.   Fixing the leak here in __proc_set_tty
is easy and obviously correct so I am doing that first.

Fixing the places that should be performing hangup processing is much
less obviously correct.  So those I'm aiming those patches at -mm.
for now, so the can age a while before they are merged.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] gpio_direction_output-needs-an-initial-value fix
David Brownell [Sun, 18 Mar 2007 09:26:13 +0000 (01:26 -0800)]
[PATCH] gpio_direction_output-needs-an-initial-value fix

Build fix:  sa1100/generic.c should already have included <asm/gpio.h>,
but it didn't ... causing a build problem with a recent patch.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] i386: trust the PM-Timer calibration of the local APIC timer
Thomas Gleixner [Sun, 18 Mar 2007 09:26:13 +0000 (01:26 -0800)]
[PATCH] i386: trust the PM-Timer calibration of the local APIC timer

When PM-Timer is available for local APIC timer calibration we can skip the
verification of the calibrated time value.  The resulting error is quite
small on a bunch of evaluated platforms and is less harming than the
observed false positives.

We need to keep the verification on systems, which have no PM-Timer to
avoid bogus local APIC timer calibrations in the range of factor 2-10,
which can be observed when swicthing off the PM-timer support in the kernel
configuration.

The wrong calibration values are probably caused by SMM code trying to
emulate a PS/2 keyboard from a (maybe connected or not) USB keyboard.  This
prohibits the accurate delivery of PIT interrupts, which are used to
calibrate the local APIC timer.  Unfortunately we have no way to disable
this BIOS misfeature in the early boot process.

Add also the dropped cpu_relax() back to the wait loops.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] Fix atomicity of TIF update in flush_thread() for x86_64
Mathieu Desnoyers [Sun, 18 Mar 2007 09:26:11 +0000 (01:26 -0800)]
[PATCH] Fix atomicity of TIF update in flush_thread() for x86_64

Fix atomicity of TIF update in flush_thread() for x86_64

Race :

parent process executing :
sys_ptrace()
 (lock_kernel())
 (ptrace_get_task_struct(pid))
 arch_ptrace()
   ptrace_detach()
     ptrace_disable(child);
       clear_singlestep(child);
         clear_tsk_thread_flag(child, TIF_SINGLESTEP);
         (which clears the TIF_SINGLESTEP flag atomically from a different
  process)
 (put_task_struct(child))
 (unlock_kernel())

And at the same time, in the child process :
sys_execve()
 do_execve()
   search_binary_handler()
     load_elf_binary()
       flush_old_exec()
         flush_thread()
           doing a non-atomic thread flag update

Signed-off-by: Rebecca Schultz <rschultz@google.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] machzwd warning fix
Andrew Morton [Sun, 18 Mar 2007 09:26:10 +0000 (01:26 -0800)]
[PATCH] machzwd warning fix

drivers/char/watchdog/machzwd.c: In function 'zf_ioctl':
drivers/char/watchdog/machzwd.c:327: warning: passing argument 1 of 'zf_ping' makes integer from pointer without a cast

Also some coding-style repairs.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ftp.linux.org.uk>
Acked-by: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] ia64: platform_kernel_launch_event is noop on generic kernel
John Keller [Sun, 18 Mar 2007 09:26:09 +0000 (01:26 -0800)]
[PATCH] ia64: platform_kernel_launch_event is noop on generic kernel

Add a missing #define for the platform_kernel_launch_event.  Without this
fix, a call to platform_kernel_launch_event() becomes a noop on generic
kernels.  SN systems require this fix to successfully kdump/kexec from
certain hardware errors.

[bwalle@suse.de: fix it]
Signed-off-by: John Keller <jpk@sgi.com>
Cc: Bernhard Walle <bwalle@suse.de>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Jay Lan <jlan@sgi.com>
Acked-by: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] Fix wrong /proc/iomem on SGI Altix
Bernhard Walle [Sun, 18 Mar 2007 09:26:08 +0000 (01:26 -0800)]
[PATCH] Fix wrong /proc/iomem on SGI Altix

In sn_io_slot_fixup(), the parent is re-set from the bus to
io(port|mem)_resource because the address is changed in a way that it's not
child of the bus any more.

However, only the root is set but not the parent/child/sibling relationship
in the resource tree which causes 'cat /proc/iomem' to stop after this
memory area.  Depding on the poition in the tree the iomem may be nearly
completely empty.

Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: John Keller <jpk@sgi.com>
Cc: Jay Lan <jlan@engr.sgi.com>
Acked-by: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[PATCH] X86_P4_CLOCKMOD must select CPU_FREQ_TABLE
Adrian Bunk [Sun, 18 Mar 2007 09:26:07 +0000 (01:26 -0800)]
[PATCH] X86_P4_CLOCKMOD must select CPU_FREQ_TABLE

CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
CONFIG_X86_P4_CLOCKMOD=y

arch/x86_64/kernel/built-in.o: In function `cpufreq_p4_verify':p4-clockmod.c:(.text.cpufreq_p4_verify+0x8): undefined reference to `cpufreq_frequency_table_verify'
arch/x86_64/kernel/built-in.o: In function `cpufreq_p4_cpu_exit':p4-clockmod.c:(.text.cpufreq_p4_cpu_exit+0x8): undefined reference to `cpufreq_frequency_table_put_attr'
arch/x86_64/kernel/built-in.o: In function `cpufreq_p4_cpu_init':p4-clockmod.c:(.text.cpufreq_p4_cpu_init+0x13b): undefined reference to `cpufreq_frequency_table_get_attr'

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Dave Jones <davej@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years agoMerge branch 'linus' of git://kvm.qumranet.com/home/avi/kvm
Linus Torvalds [Sun, 18 Mar 2007 18:08:52 +0000 (11:08 -0700)]
Merge branch 'linus' of git://kvm.qumranet.com/home/avi/kvm

* 'linus' of git://kvm.qumranet.com/home/avi/kvm:
  KVM: MMU: Fix host memory corruption on i386 with >= 4GB ram
  KVM: MMU: Fix guest writes to nonpae pde
  KVM: Fix guest sysenter on vmx
  KVM: Unset kvm_arch_ops if arch module loading failed

14 years agoMerge branch 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa
Linus Torvalds [Sun, 18 Mar 2007 17:50:44 +0000 (10:50 -0700)]
Merge branch 'linus' of /linux/kernel/git/perex/alsa

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa:
  [ALSA] hda-intel - Fix HDA buffer alignment
  [ALSA] hda-codec - Add model for HP Compaq d5750
  [ALSA] hda-codec - Add support for MacBook Pro 1st generation
  [ALSA] version 1.0.14rc3
  [ALSA] hda-codec - Add model for HP Compaq d5700
  [ALSA] intel8x0 - Fix Oops at kdump crash kernel
  [ALSA] hda-codec - Fix speaker output on MacPro
  [ALSA] hda-codec - more systems for Analog Devices
  [ALSA] hda-intel - Fix codec probe with ATI contorllers
  [ALSA] hda-codec - Add suppoprt for Asus M2N-SLI motherboard
  [ALSA] intel8x0 - Fix speaker output after S2RAM
  [ALSA] ac97 - fix AD shared shared jack control logic
  [ALSA] soc - Fix dependencies in Kconfig files

14 years agoKVM: MMU: Fix host memory corruption on i386 with >= 4GB ram
Avi Kivity [Fri, 9 Mar 2007 11:04:31 +0000 (13:04 +0200)]
KVM: MMU: Fix host memory corruption on i386 with >= 4GB ram

PAGE_MASK is an unsigned long, so using it to mask physical addresses on
i386 (which are 64-bit wide) leads to truncation.  This can result in
page->private of unrelated memory pages being modified, with disasterous
results.

Fix by not using PAGE_MASK for physical addresses; instead calculate
the correct value directly from PAGE_SIZE.  Also fix a similar BUG_ON().

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
14 years agoKVM: MMU: Fix guest writes to nonpae pde
Avi Kivity [Thu, 8 Mar 2007 15:13:32 +0000 (17:13 +0200)]
KVM: MMU: Fix guest writes to nonpae pde

KVM shadow page tables are always in pae mode, regardless of the guest
setting.  This means that a guest pde (mapping 4MB of memory) is mapped
to two shadow pdes (mapping 2MB each).

When the guest writes to a pte or pde, we intercept the write and emulate it.
We also remove any shadowed mappings corresponding to the write.  Since the
mmu did not account for the doubling in the number of pdes, it removed the
wrong entry, resulting in a mismatch between shadow page tables and guest
page tables, followed shortly by guest memory corruption.

This patch fixes the problem by detecting the special case of writing to
a non-pae pde and adjusting the address and number of shadow pdes zapped
accordingly.

Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Avi Kivity <avi@qumranet.com>
14 years agoKVM: Fix guest sysenter on vmx
Avi Kivity [Tue, 6 Mar 2007 10:05:53 +0000 (12:05 +0200)]
KVM: Fix guest sysenter on vmx

The vmx code currently treats the guest's sysenter support msrs as 32-bit
values, which breaks 32-bit compat mode userspace on 64-bit guests.  Fix by
using the native word width of the machine.

Signed-off-by: Avi Kivity <avi@qumranet.com>
14 years agoKVM: Unset kvm_arch_ops if arch module loading failed
Avi Kivity [Thu, 1 Mar 2007 17:21:03 +0000 (19:21 +0200)]
KVM: Unset kvm_arch_ops if arch module loading failed

Otherwise, the core module thinks the arch module is loaded, and won't
let you reload it after you've fixed the bug.

Signed-off-by: Avi Kivity <avi@qumranet.com>