sfrench/cifs-2.6.git
3 years agoMerge tag 'drm-intel-next-fixes-2018-02-07' of git://anongit.freedesktop.org/drm...
Dave Airlie [Wed, 7 Feb 2018 22:21:37 +0000 (08:21 +1000)]
Merge tag 'drm-intel-next-fixes-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Fix for pcode timeouts on BXT and GLK, cmdparser fixes and fixes
for new vbt version on CFL and CNL.

GVT contains vGPU reset enhancement, which refines vGPU reset flow
and the support of virtual aperture read/write when x-no-mmap=on
is set in KVM, which is required by a test case from Redhat and
also another fix for virtual OpRegion.

* tag 'drm-intel-next-fixes-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel:
  drm/i915/bios: add DP max link rate to VBT child device struct
  drm/i915/cnp: Properly handle VBT ddc pin out of bounds.
  drm/i915/cnp: Ignore VBT request for know invalid DDC pin.
  drm/i915/cmdparser: Do not check past the cmd length.
  drm/i915/cmdparser: Check reg_table_count before derefencing.
  drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing
  drm/i915/gvt: Use KVM r/w to access guest opregion
  drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on
  drm/i915/gvt: only reset execlist state of one engine during VM engine reset
  drm/i915/gvt: refine intel_vgpu_submission_ops as per engine ops

3 years agodrm/i915/bios: add DP max link rate to VBT child device struct
Jani Nikula [Thu, 18 Jan 2018 15:33:10 +0000 (17:33 +0200)]
drm/i915/bios: add DP max link rate to VBT child device struct

Update VBT defs to reflect revision 216. While at it, default the
expected child device struct size to sizeof the size rather than a
hardcoded value.

v2: Fix bit order (David)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180118153310.32437-1-jani.nikula@intel.com
(cherry picked from commit c4fb60b9aba9f939d3f8575df23fd8d5958ec6ed)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agoMerge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Wed, 7 Feb 2018 19:54:27 +0000 (05:54 +1000)]
Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next

A few more misc fixes for 4.16.

* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux:
  drm/amdgpu: re-enable CGCG on CZ and disable on ST
  drm/amdgpu: disable coarse grain clockgating for ST
  drm/radeon: adjust tested variable
  drm/amdgpu: remove WARN_ON when VM isn't found v2
  drm/amdgpu: fix locking in vega10_ih_prescreen_iv
  drm/amdgpu: fix another potential cause of VM faults
  drm/amdgpu: use queue 0 for kiq ring
  drm/ttm: Fix 'buf' pointer update in ttm_bo_vm_access_kmap() (v2)
  drm/ttm: fix missing parameter change for ttm_bo_cleanup_refs

3 years agodrm/i915/cnp: Properly handle VBT ddc pin out of bounds.
Rodrigo Vivi [Thu, 25 Jan 2018 22:25:24 +0000 (14:25 -0800)]
drm/i915/cnp: Properly handle VBT ddc pin out of bounds.

If the table result is out of bounds on the array map
there is something really wrong with VBT pin so we don't
return that vbt_pin, but only return 0 instead.

This basically reverts commit 'a8e6f3888b05 ("drm/i915/cnp:
Ignore VBT request for know invalid DDC pin.")'

Also this properly fixes commit 9c3b2689d01f ("drm/i915/cnl:
Map VBT DDC Pin to BSpec DDC Pin.")

v2: Do in a way that we don't break other platforms. (Jani)

v3: Keep debug message (Jani)

v4: Don't mess with 0 mapping was noticed by Jani and
    addressed with a simple solution suggested by Lucas
    that makes this even simpler.

Fixes: a8e6f3888b05 ("drm/i915/cnp: Ignore VBT request for know invalid DDC pin.")
Fixes: 9c3b2689d01f ("drm/i915/cnl: Map VBT DDC Pin to BSpec DDC Pin.")
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Kai Heng Feng <kai.heng.feng@canonical.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125222524.22059-1-rodrigo.vivi@intel.com
(cherry picked from commit 3393ce1ed8fc43dbdb83952facaf04e644ca1d54)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/cnp: Ignore VBT request for know invalid DDC pin.
Rodrigo Vivi [Tue, 23 Jan 2018 17:40:50 +0000 (09:40 -0800)]
drm/i915/cnp: Ignore VBT request for know invalid DDC pin.

Let's ignore VBT request if the pin is clearly wrong.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104139
Cc: Kai Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123174050.4261-1-rodrigo.vivi@intel.com
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
(cherry picked from commit a8e6f3888b05c1e7b685800a3371ce050720368f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/cmdparser: Do not check past the cmd length.
Michal Srb [Mon, 5 Feb 2018 16:04:38 +0000 (16:04 +0000)]
drm/i915/cmdparser: Do not check past the cmd length.

The command MEDIA_VFE_STATE checks bits at offset +2 dwords. However, it is
possible to have MEDIA_VFE_STATE command with length = 0 + LENGTH_BIAS = 2.
In that case check_cmd will read bits from the following command, or even past
the end of the buffer.

If the offset ends up outside of the command length, reject the command.

Fixes: 351e3db2b363 ("drm/i915: Implement command buffer parsing logic")
Signed-off-by: Michal Srb <msrb@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205151745.29292-1-msrb@suse.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205160438.3267-2-chris@chris-wilson.co.uk
(cherry picked from commit 3aec7f871c65eb5f76b4125fda432593c834a6f2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/cmdparser: Check reg_table_count before derefencing.
Michal Srb [Mon, 5 Feb 2018 16:04:37 +0000 (16:04 +0000)]
drm/i915/cmdparser: Check reg_table_count before derefencing.

The find_reg function was assuming that there is always at least one table in
reg_tables. It is not always true.

In case of VCS or VECS, the reg_tables is NULL and reg_table_count is 0,
implying that no register-accessing commands are allowed. However, the command
tables include commands such as MI_STORE_REGISTER_MEM. When trying to check
such command, the find_reg would dereference NULL pointer.

Now it will just return NULL meaning that the register was not found and the
command will be rejected.

Fixes: 76ff480ec963 ("drm/i915/cmdparser: Use binary search for faster register lookup")
Signed-off-by: Michal Srb <msrb@suse.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205142916.27092-2-msrb@suse.com
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180205160438.3267-1-chris@chris-wilson.co.uk
register lookup")
(cherry picked from commit 2f265fad9756a40c09e3f4dcc62d5d7fa73a9fb2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing
Imre Deak [Tue, 30 Jan 2018 14:29:38 +0000 (16:29 +0200)]
drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing

Currently we see sporadic timeouts during CDCLK changing both on BXT and
GLK as reported by the Bugzilla: ticket. It's easy to reproduce this by
changing the frequency in a tight loop after blanking the display. The
upper bound for the completion time is 800us based on my tests, so
increase it from the current 500us to 2ms; with that I couldn't trigger
the problem either on BXT or GLK.

Note that timeouts happened during both the change notification and the
voltage level setting PCODE request. (For the latter one BSpec doesn't
require us to wait for completion before further HW programming.)

This issue is similar to
commit 2c7d0602c815 ("drm/i915/gen9: Fix PCODE polling during CDCLK
change notification")
but there the PCODE request does complete (as shown by the mbox
busy flag), only the reply we get from PCODE indicates a failure.
So there we keep resending the request until a success reply, here we
just have to increase the timeout for the one PCODE request we send.

v2:
- s/snb_pcode_request/sandybridge_pcode_write_timeout/ (Ville)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.4+
Acked-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103326
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130142939.17983-1-imre.deak@intel.com
(cherry picked from commit e76019a81921e87a4d9e7b3d86102bc708a6c227)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: Use KVM r/w to access guest opregion
Tina Zhang [Wed, 31 Jan 2018 06:42:44 +0000 (14:42 +0800)]
drm/i915/gvt: Use KVM r/w to access guest opregion

For KVMGT, the guest opregion, which is handled by VFIO, is actually a
piece of guest memory which won't be accessed by devices. So, its mfn
shouldn't be obtained through VFIO interface. This patch uses KVM r/w
interface to access the data in guest opregion.

Fix the guest opregion accessing issue when host "intel_iommu=on".

v3:
- Remove mapped flag for KVM/VFIO usage, as it's useless for KVM.

v2:
- Set the gpa correctly when invoking KVM r/w operations. (Zhenyu)

Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on
Changbin Du [Tue, 30 Jan 2018 05:51:31 +0000 (13:51 +0800)]
drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on

When add 'x-no-mmap=on' for vfio-pci option, aperture access in guest
is emulated. But the vgpu_aperture_rw() function take wrong offset when
do memcpy, since vgpu->gm.aperture_va is not the base of entire aperture.
This mistake cause GPU command in guest get lost and so the seqno is not
updated in engine HWSP.

This patch fix this, and it also move the emulation code to kvmgt.
Because only vfio need to emulate it. Put aperture rw to MMIO emulation
path breaks assumptions in xengt.

v2: Remove PAGE_ALIGN for size (zhenyu)

Fixes: f090a00df9ec ("drm/i915/gvt: Add emulation for BAR2 (aperture) with normal file RW approach")
Signed-off-by: Changbin Du <changbin.du@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: only reset execlist state of one engine during VM engine reset
Weinan Li [Fri, 26 Jan 2018 07:09:08 +0000 (15:09 +0800)]
drm/i915/gvt: only reset execlist state of one engine during VM engine reset

Only reset vgpu execlist state of the exact engine which gets reset
request from VM. After read context status from HWSP enabled, KMD will use
the saved CSB read pointer but not always read from MMIO. When one engine
reset happen, only the read pointer of this engine will be reset, in GVT-g
host side also need to align with this policy, otherwise VM may get wrong
CSB status after one engine reset compeleted.

v2: Split refine and fix patch, code refine(Zhenyu)
v3: Move active flag of vgpu scheduler into sched_data(Zhenyu)

Cc: Fred Gao <fred.gao@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: refine intel_vgpu_submission_ops as per engine ops
Weinan Li [Fri, 26 Jan 2018 07:09:07 +0000 (15:09 +0800)]
drm/i915/gvt: refine intel_vgpu_submission_ops as per engine ops

Using per engine ops will be more flexible, here refine sub-ops(init,
clean) as per engine operation align with reset operation. This change also
will be used in next fix patch for VM engine reset.

Cc: Fred Gao <fred.gao@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/amdgpu: re-enable CGCG on CZ and disable on ST
Shirish S [Mon, 5 Feb 2018 03:53:00 +0000 (09:23 +0530)]
drm/amdgpu: re-enable CGCG on CZ and disable on ST

The CGCG feature on Stoney is causing GFX related
issues such as freezes and blank outs.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoMerge branch 'linux-4.16' of git://github.com/skeggsb/linux into drm-next
Dave Airlie [Mon, 5 Feb 2018 20:33:04 +0000 (06:33 +1000)]
Merge branch 'linux-4.16' of git://github.com/skeggsb/linux into drm-next

- initial kepler clock gating support
- atomic gamma handling fixes
- support for gp108 "secure boot" (enables acceleration, finally)

* 'linux-4.16' of git://github.com/skeggsb/linux:
  drm/nouveau/clk: fix gcc-7 -Wint-in-bool-context warning
  drm/nouveau/mmu: Fix trailing semicolon
  drm/nouveau: Introduce NvPmEnableGating option
  drm/nouveau: Add support for SLCG for Kepler2
  drm/nouveau: Add support for BLCG on Kepler2
  drm/nouveau: Add support for BLCG on Kepler1
  drm/nouveau: Add support for basic clockgating on Kepler1
  drm/nouveau/kms/nv50: fix handling of gamma since atomic conversion
  drm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets
  drm/nouveau/kms/nv50: use "low res" lut for indexed mode
  drm/nouveau/kms/nv50: prepare for double-buffered LUTs
  drm/nouveau/bo: add helper functions for handling pinned+mapped buffers
  drm/nouveau/fbcon: add module parameter to select bits-per-pixel
  drm/nouveau/secboot/gp108: implement on top of acr_r370
  drm/nouveau/secboot/r370: implement support for booting LS SEC2 ucode
  drm/nouveau/secboot/r370: move a bunch of r375 stuff to a new implementation
  drm/nouveau: nouveau: use correct string length
  drm/nouveau/drm/nouveau/mmu: fix odd_ptr_err.cocci warnings
  drm/nouveau/pmu/fuc: don't use movw directly anymore

3 years agoMerge tag 'drm-intel-next-fixes-2018-02-01' of git://anongit.freedesktop.org/drm...
Dave Airlie [Mon, 5 Feb 2018 20:31:01 +0000 (06:31 +1000)]
Merge tag 'drm-intel-next-fixes-2018-02-01' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Fixes for GPU hangs and other bugs around hangcheck and result;
Fix for regression on suspend case with vgaswitcheroo;
Fixes for eDP and HDMI blank screens
Fix for protecting WC allocation to avoid overflow on page vec;
Cleanup around unpublished GLK firmware blobs, and other small fixes.

This also contains GVT pull request mostly with regression
fixes on vGPU display dmabuf, mmio switch and other misc changes.

* tag 'drm-intel-next-fixes-2018-02-01' of git://anongit.freedesktop.org/drm/drm-intel: (21 commits)
  drm/i915/ppgtt: Pin page directories before allocation
  drm/i915: Always run hangcheck while the GPU is busy
  Revert "drm/i915: mark all device info struct with __initconst"
  drm/i915/edp: Do not do link training fallback or prune modes on EDP
  drm/i915: Check for fused or unused pipes
  drm/i915: Protect WC stash allocation against direct reclaim
  drm/i915: Only attempt to scan the requested number of shrinker slabs
  drm/i915: Always call to intel_display_set_init_power() in resume_early.
  drm/i915/gvt: cancel scheduler timer when no vGPU exists
  drm/i915/gvt: cancel virtual vblank timer when no vGPU exists
  drm/i915/gvt: Keep obj->dma_buf link NULL during exporting
  drm/i915/pmu: Reconstruct active state on starting busy-stats
  drm/i915: Stop getting the fault address from RING_FAULT_REG
  drm/i915/guc: Add uc_fini_wq in gem_init unwind path
  drm/i915: Fix using BIT_ULL() vs. BIT() for power domain masks
  drm/i915: Try EDID bitbanging on HDMI after failed read
  drm/i915/glk: Disable Guc and HuC on GLK
  drm/i915/gvt: Do not use I915_NUM_ENGINES to iterate over the mocs regs array
  drm/i915/gvt: validate gfn before set shadow page entry
  drm/i915/gvt: add PLANE_KEYMAX regs to mmio track list
  ...

3 years agodrm/nouveau/clk: fix gcc-7 -Wint-in-bool-context warning
Arnd Bergmann [Tue, 16 Jan 2018 13:44:50 +0000 (14:44 +0100)]
drm/nouveau/clk: fix gcc-7 -Wint-in-bool-context warning

gcc thinks that interpreting a multiplication result as a bool
is confusing:

drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c: In function 'read_pll':
drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c:133:8: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]

Adding a temporary variable to contain the divisor helps make
it clear what is going on and avoids that warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau/mmu: Fix trailing semicolon
Luis de Bethencourt [Wed, 17 Jan 2018 18:53:14 +0000 (18:53 +0000)]
drm/nouveau/mmu: Fix trailing semicolon

The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.

Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau: Introduce NvPmEnableGating option
Lyude Paul [Thu, 1 Feb 2018 18:13:59 +0000 (13:13 -0500)]
drm/nouveau: Introduce NvPmEnableGating option

This adds the NvPmEnableGating config option to nouveau, which can be
used to enable or disable clockgating for supported chipsets. Enabling
can be done by passing

config=NvPmEnableGating=1

To nouveau. If your chipset supports it, you'll see a message in your
kernel log indicating that clockgating is enabled. Since clockgating has
only had limited testing thus far, we leave this option disabled by
default for now.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau: Add support for SLCG for Kepler2
Lyude Paul [Thu, 1 Feb 2018 18:13:58 +0000 (13:13 -0500)]
drm/nouveau: Add support for SLCG for Kepler2

That's right, there's still more power saving to go! Starting with
kepler 2, nvidia hardware has an additional level of clockgating known
as second level clockgating.  The details of this are not exact, but it
seems to work by waiting for a collection of dependent hardware blocks
to be gated before taking affect. As with the previous series, this
results in another noticeable drop in power consumption and is
programmed in the same manner.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau: Add support for BLCG on Kepler2
Lyude Paul [Thu, 1 Feb 2018 18:13:57 +0000 (13:13 -0500)]
drm/nouveau: Add support for BLCG on Kepler2

Same as the previous patch, but for Kepler2 now

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau: Add support for BLCG on Kepler1
Lyude Paul [Thu, 1 Feb 2018 18:13:56 +0000 (13:13 -0500)]
drm/nouveau: Add support for BLCG on Kepler1

This enables BLCG optimization for kepler1. When using clockgating,
nvidia's firmware has a set of registers which are initially programmed
by the vbios with various engine delays and other mysterious settings
that are safe enough to bring up the GPU. However, the values used by
the vbios are more power hungry then they need to be, so the nvidia driver
writes it's own more optimized set of BLCG settings before enabling
CG_CTRL. This adds support for programming the optimized BLCG values
during engine/subdev init, which enables rather significant power
savings.

This introduces the nvkm_therm_clkgate_init() helper, which we use to
program the optimized BLCG settings before enabling clockgating with
nvkm_therm_clkgate_enable.

As well, this commit shares a lot more code with Fermi since BLCG is
mostly the same there as far as we can tell. In the future, it's likely
we'll reformat the clkgate_packs for kepler1 so that they share a list
of mmio packs with Fermi.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau: Add support for basic clockgating on Kepler1
Lyude Paul [Thu, 1 Feb 2018 18:13:55 +0000 (13:13 -0500)]
drm/nouveau: Add support for basic clockgating on Kepler1

This adds support for enabling automatic clockgating on nvidia GPUs for
Kepler1. While this is not technically a clockgating level, it does
enable clockgating using the clockgating values initially set by the
vbios (which should be safe to use).

This introduces two therm helpers for controlling basic clockgating:
nvkm_therm_clkgate_enable() - enables clockgating through
CG_CTRL, done after initializing the GPU fully
nvkm_therm_clkgate_fini() - prepares clockgating for suspend or
driver unload

A lot of this code was originally going to be based off of fermi;
however it turns out that while Fermi's the first line of GPUs that
introduced this kind of power saving, Fermi requires more fine tuned
control of the CG_CTRL registers from the driver while reclocking that
we don't entirely understand yet.

For the simple parts we will be sharing with Fermi for certain however,
we at least add those into a new subdev/therm/gf100.h header.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau/kms/nv50: fix handling of gamma since atomic conversion
Ben Skeggs [Fri, 12 Jan 2018 07:05:33 +0000 (17:05 +1000)]
drm/nouveau/kms/nv50: fix handling of gamma since atomic conversion

We've still been directly using the legacy crtc gamma_set() hook even
after conversion to atomic modesetting.

For userspace clients this was fine, however, fbcon will use the atomic
property when it's running on an atomic driver, which means we miss its
colormap updates - which is particularly bad for 8bpp framebuffers!

This commit converts the driver to use the atomic property + the helper
function implementing the legacy hook on top of atomic.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets
Ben Skeggs [Fri, 12 Jan 2018 09:02:05 +0000 (19:02 +1000)]
drm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets

For some reason forgotten by history, we've been using a 1025-entry LUT
mode, and sparsely filling it with the 256-entry LUT we're handed.

Until we land support for the full atomic colour management properties,
this commit switches to using the 257-entry mode to fix colour mapping
with depth 30 framebuffers.

Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau/kms/nv50: use "low res" lut for indexed mode
Ilia Mirkin [Sun, 31 Dec 2017 04:35:28 +0000 (23:35 -0500)]
drm/nouveau/kms/nv50: use "low res" lut for indexed mode

This is what was done prior to the big refactor in kernel 3.8, and what
was done by xf86-video-nv. Experimentally, it seems like there's some
sort of issue with the high-res lut to be used there. Tested on G92.

This ends up mattering because fbcon/fbdev chooses the C8 fb format for
low-vram systems, which can occur with some IGP-based configurations
with little "stolen" vram.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80675
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau/kms/nv50: prepare for double-buffered LUTs
Ben Skeggs [Fri, 12 Jan 2018 07:10:49 +0000 (17:10 +1000)]
drm/nouveau/kms/nv50: prepare for double-buffered LUTs

We need to double-buffer LUTs to handle their update atomically.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau/bo: add helper functions for handling pinned+mapped buffers
Ben Skeggs [Fri, 12 Jan 2018 07:05:03 +0000 (17:05 +1000)]
drm/nouveau/bo: add helper functions for handling pinned+mapped buffers

This is a common, awkward sequence.  Let's wrap it up!

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau/fbcon: add module parameter to select bits-per-pixel
Ben Skeggs [Fri, 12 Jan 2018 07:50:37 +0000 (17:50 +1000)]
drm/nouveau/fbcon: add module parameter to select bits-per-pixel

Useful for debugging.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau/secboot/gp108: implement on top of acr_r370
Ben Skeggs [Tue, 12 Dec 2017 06:09:03 +0000 (16:09 +1000)]
drm/nouveau/secboot/gp108: implement on top of acr_r370

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Gourav Samaiya <gsamaiya@nvidia.com>
3 years agodrm/nouveau/secboot/r370: implement support for booting LS SEC2 ucode
Ben Skeggs [Tue, 12 Dec 2017 06:08:05 +0000 (16:08 +1000)]
drm/nouveau/secboot/r370: implement support for booting LS SEC2 ucode

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Gourav Samaiya <gsamaiya@nvidia.com>
3 years agodrm/nouveau/secboot/r370: move a bunch of r375 stuff to a new implementation
Ben Skeggs [Tue, 12 Dec 2017 05:50:10 +0000 (15:50 +1000)]
drm/nouveau/secboot/r370: move a bunch of r375 stuff to a new implementation

It's entirely possibly that the other r375 code is relevant to r370 too,
but I've not confirmed this, so I'll leave it where it is for now.

NVIDIA's copyright headers maintained, as it's still all their code.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Gourav Samaiya <gsamaiya@nvidia.com>
3 years agodrm/nouveau: nouveau: use correct string length
Arnd Bergmann [Mon, 4 Dec 2017 14:54:26 +0000 (15:54 +0100)]
drm/nouveau: nouveau: use correct string length

gcc-8 reports

drivers/gpu/drm/nouveau/nvkm/engine/pm/base.c: In function 'nvkm_perfmon_mthd':
include/linux/string.h:265:9: error: '__builtin_strncpy' specified bound 64 equals destination size [-Werror=stringop-truncation]

We need one less byte or call strlcpy() to make it a
nul-terminated string.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/nouveau/drm/nouveau/mmu: fix odd_ptr_err.cocci warnings
Christoph Böhmwalder [Thu, 30 Nov 2017 19:53:54 +0000 (20:53 +0100)]
drm/nouveau/drm/nouveau/mmu: fix odd_ptr_err.cocci warnings

The kbuild test bot complained about a new coccinelle warning nearby,
which sparked a discussion about the assignment to 'memory' inside of
the conditional expression.  See Link below for the original post.

Fix the assignment to silence the coccinelle warning and also make the
code look a little nicer.

Link: https://lists.freedesktop.org/archives/nouveau/2017-November/029242.html
Signed-off-by: Christoph Böhmwalder <christoph@boehmwalder.at>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
3 years agodrm/nouveau/pmu/fuc: don't use movw directly anymore
Karol Herbst [Mon, 6 Nov 2017 15:32:41 +0000 (16:32 +0100)]
drm/nouveau/pmu/fuc: don't use movw directly anymore

Fixes failure to compile with recent envyas as a result of the 'movw'
alias being removed for v5.

A bit of history:

v3 only has a 16-bit sign-extended immediate mov op. In order to set
the high bits, there's a separate 'sethi' op. envyas validates that
the value passed to mov(imm) is between -0x8000 and 0x7fff. In order
to simplify macros that load both the low and high word, a 'movw'
alias was added which takes an unsigned 16-bit immediate. However the
actual hardware op still sign extends.

v5 has a full 32-bit immediate mov op. The v3 16-bit immediate mov op
is gone (loads 0 into the dst reg). However due to a bug in envyas,
the movw alias still existed, and selected the no-longer-present v3
16-bit immediate mov op. As a result usage of movw on v5 is the same
as mov with a 0x0 argument.

The proper fix throughout is to only ever use the 'movw' alias in
combination with 'sethi'. Anything else should get the sign-extended
validation to ensure that the intended value ends up in the
destination register.

Changes in fuc3 binaries is the result of a different encoding being
selected for a mov with an 8-bit value.

v2: added commit message written by Ilia, thanks for that!
v3: messed up rebasing, now it should apply

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
3 years agodrm/i915/ppgtt: Pin page directories before allocation
Chris Wilson [Wed, 31 Jan 2018 21:44:39 +0000 (21:44 +0000)]
drm/i915/ppgtt: Pin page directories before allocation

Commit e2b763caa6eb ("drm/i915: Remove bitmap tracking for used-pdpes")
believed that because it did not insert its freshly allocated page
directory into the pd tree, it was safe from the shrinker. I failed to
heed the lesson learnt from commit dd19674bacba ("drm/i915: Remove bitmap
tracking for used-ptes") that we need to pin all the levels in the tree
before hitting the shrinker or else the shrinker may free an upper layer
as we proceed to allocate the tree. Thus leaving dangling pointers
everywhere and a GPF should we hit direct reclaim at just the wrong
moment.

CPU: 0 PID: 7374 Comm: chromium Tainted: P           O    4.14.13-1-ARCH #1
Hardware name: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B33.1706181928 06/18/2017
task: ffff994f696c2c40 task.stack: ffffb1a789d4c000
RIP: 0010:gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915]
RSP: 0018:ffffb1a789d4f940 EFLAGS: 00010206
RAX: 81c1788cc4f68138 RBX: ffff994f54db8000 RCX: ffff994f696c2c40
RDX: 000000023bc73003 RSI: ffff994d598b6b80 RDI: ffff994f54db8000
RBP: ffff994d598b6b80 R08: 0000000000000000 R09: 0000000000000000
R10: ffffb1a789d4f550 R11: ffff994eaf3c3208 R12: 0000000000000027
R13: 0000000000005000 R14: 0000000004e8f000 R15: ffff994f54dba000
FS:  00007f585886aa00(0000) GS:ffff994faec00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004ac8e8 CR3: 00000002552c8004 CR4: 00000000003606f0
Call Trace:
 gen8_ppgtt_alloc_pdp+0x178/0x320 [i915]
 gen8_ppgtt_alloc_4lvl+0x5f/0x150 [i915]
 ppgtt_bind_vma+0x30/0x70 [i915]
 i915_vma_bind+0x68/0xd0 [i915]
 __i915_vma_do_pin+0x2d6/0x3a0 [i915]
 eb_lookup_vmas+0x7a2/0xb50 [i915]
 i915_gem_do_execbuffer+0x4d7/0x10e0 [i915]
 ? sock_wfree+0x34/0x60
 ? unix_stream_read_generic+0x1f9/0x7e0
 ? import_iovec+0x37/0xd0
 ? i915_gem_execbuffer2+0x5d/0x390 [i915]
 i915_gem_execbuffer2+0x1b7/0x390 [i915]
 ? i915_gem_execbuffer+0x2d0/0x2d0 [i915]
 drm_ioctl_kernel+0x59/0xb0 [drm]
 drm_ioctl+0x2d5/0x370 [drm]
 ? i915_gem_execbuffer+0x2d0/0x2d0 [i915]
 ? __seccomp_filter+0x3b/0x260
 do_vfs_ioctl+0xa1/0x610
 ? syscall_trace_enter+0xdb/0x2b0
 SyS_ioctl+0x74/0x80
 do_syscall_64+0x55/0x110
 entry_SYSCALL64_slow_path+0x25/0x25
RIP: 0033:0x7f584fa82d27
RSP: 002b:00007ffee14a7828 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 000003b0126a1030 RCX: 00007f584fa82d27
RDX: 00007ffee14a7870 RSI: 0000000040406469 RDI: 0000000000000080
RBP: 00007ffee14a7870 R08: 0000000000000002 R09: 0000000000000077
R10: 00007f5839f2b780 R11: 0000000000000246 R12: 0000000040406469
R13: 0000000000000080 R14: 00007f5842b00040 R15: 0000000000000000
Code: 01 00 83 81 58 0a 00 00 01 48 2b 05 13 9d fd c9 48 c1 f8 06 48 c1 e0 0c 48 8d 04 d0 48 8b 56 08 48 03 05 0c 9d fd c9 48 83 ca 03 <48> 89 10 83 a9 58 0a 00 00 01 65 ff 0d 37 03 fb 3e 74 02 f3 c3
RIP: gen8_ppgtt_set_pde.isra.40+0x48/0x70 [i915] RSP: ffffb1a789d4f940

Reported-by: Eric Blau <eblau@eblau.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104773
Fixes: e2b763caa6eb ("drm/i915: Remove bitmap tracking for used-pdpes")
References: dd19674bacba ("drm/i915: Remove bitmap tracking for used-ptes")
Testcase: igt/drv_selftest/live_gtt (igt_ppgtt_shrink_boom)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180131214440.7141-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
(cherry picked from commit b715a2f0c7714a399e7f8e951cc8dea9cd4eeb4b)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915: Always run hangcheck while the GPU is busy
Chris Wilson [Mon, 29 Jan 2018 14:41:04 +0000 (14:41 +0000)]
drm/i915: Always run hangcheck while the GPU is busy

Previously, we relied on only running the hangcheck while somebody was
waiting on the GPU, in order to minimise the amount of time hangcheck
had to run. (If nobody was watching the GPU, nobody would notice if the
GPU wasn't responding -- eventually somebody would care and so kick
hangcheck into action.) However, this falls apart from around commit
4680816be336 ("drm/i915: Wait first for submission, before waiting for
request completion"), as not all waiters declare themselves to hangcheck
and so we could switch off hangcheck and miss GPU hangs even when
waiting under the struct_mutex.

If we enable hangcheck from the first request submission, and let it run
until the GPU is idle again, we forgo all the complexity involved with
only enabling around waiters. We just have to remember to be careful that
we do not declare a GPU hang when idly waiting for the next request to
be come ready, as we will run hangcheck continuously even when the
engines are stalled waiting for external events. This should be true
already as we should only be tracking requests submitted to hardware for
execution as an indicator that the engine is busy.

Fixes: 4680816be336 ("drm/i915: Wait first for submission, before waiting for request completion"
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104840
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180129144104.3921-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 889230489b6b138ba97ba2f13fc9644a3d16d0d2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agoRevert "drm/i915: mark all device info struct with __initconst"
Lionel Landwerlin [Mon, 29 Jan 2018 08:33:46 +0000 (08:33 +0000)]
Revert "drm/i915: mark all device info struct with __initconst"

This reverts commit 5b54eddd3920e9f6f1a6d972454baf350cbae77e.

 Conflicts:
drivers/gpu/drm/i915/i915_pci.c

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104805
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 5b54eddd3920 ("drm/i915: mark all device info struct with __initconst")
Link: https://patchwork.freedesktop.org/patch/msgid/20180129083346.29173-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 5db47e37b38755c5e26e6b8fbc1a32ce73495940)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/edp: Do not do link training fallback or prune modes on EDP
Manasi Navare [Thu, 12 Oct 2017 19:13:38 +0000 (12:13 -0700)]
drm/i915/edp: Do not do link training fallback or prune modes on EDP

In case of eDP because the panel has a fixed mode, the link rate
and lane count at which it is trained corresponds to the link BW
required to support the native resolution of the panel. In case of
panles with lower resolutions where fewer lanes are hooked up internally,
that number is reflected in the MAX_LANE_COUNT DPCD register of the panel.
So it is pointless to fallback to lower link rate/lane count in case
of link training failure on eDP connector since the lower link BW
will not support the native resolution of the panel and we cannot
prune the preferred mode on the eDP connector.

In case of Link training failure on the eDP panel, something is wrong
in the HW internally and hence driver errors out with a loud
and clear DRM_ERROR message.

v2:
* Fix the DEBUG_ERROR and add {} in else (Ville Syrjala)

Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com>
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=103369
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507835618-23051-1-git-send-email-manasi.d.navare@intel.com
(cherry picked from commit c0cfb10d9e1de490e36d3b9d4228c0ea0ca30677)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915: Check for fused or unused pipes
Mika Kahola [Mon, 18 Dec 2017 08:04:03 +0000 (10:04 +0200)]
drm/i915: Check for fused or unused pipes

We may have fused or unused pipes in our system. Let's check that the pipe
in question is within limits of accessible pipes. In case, that we are not
able to access the pipe, we return early with a warning.

v2: Rephrasing of the commit message (Jani)

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103206
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jaswinder Singh Rajput <jaswinder@perfectintelligent.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1513584243-12607-1-git-send-email-mika.kahola@intel.com
(cherry picked from commit 0b7029b7e43fda1304c181a3ade0b429b9edcd9d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
3 years agodrm/i915: Protect WC stash allocation against direct reclaim
Chris Wilson [Sun, 21 Jan 2018 17:31:43 +0000 (17:31 +0000)]
drm/i915: Protect WC stash allocation against direct reclaim

As we attempt to allocate pages for use in a new WC stash, direct
reclaim may run underneath us and fill up the WC stash. We have to be
careful then not to overflow the pvec.

Fixes: 66df1014efba ("drm/i915: Keep a small stash of preallocated WC pages")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103109
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180121173143.17090-1-chris@chris-wilson.co.uk
(cherry picked from commit 073cd7816685ac77c6d8b4d321a5586c9177b76a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915: Only attempt to scan the requested number of shrinker slabs
Chris Wilson [Mon, 15 Jan 2018 21:24:46 +0000 (21:24 +0000)]
drm/i915: Only attempt to scan the requested number of shrinker slabs

Since commit 4e773c3a8a69 ("drm/i915: Wire up shrinkctl->nr_scanned"),
we track the number of objects we scan and do not wish to exceed that as
it will overly penalise our own slabs under mempressure. Given that we
now know the target number of objects to scan, use that as our guide for
deciding to shrink as opposed to the number of objects we manage to
shrink (which doesn't correspond to the numbers we report to shrinkctl).

Fixes: 4e773c3a8a69 ("drm/i915: Wire up shrinkctl->nr_scanned")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115212455.24046-2-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 29d384e34c55d696cf37bd4159e05f4b14d45da0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915: Always call to intel_display_set_init_power() in resume_early.
Maarten Lankhorst [Tue, 16 Jan 2018 15:53:24 +0000 (16:53 +0100)]
drm/i915: Always call to intel_display_set_init_power() in resume_early.

intel_power_domains_init_hw() calls set_init_power, but when using
runtime power management this call is skipped. This prevents hw readout
from taking place.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104172
Link: https://patchwork.freedesktop.org/patch/msgid/20180116155324.75120-1-maarten.lankhorst@linux.intel.com
Fixes: bc87229f323e ("drm/i915/skl: enable PC9/10 power states during suspend-to-idle")
Cc: Nivedita Swaminathan <nivedita.swaminathan@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org> # v4.5+
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit ac25dfed15d470d7f23dd817e965b54aa3f94a1e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: cancel scheduler timer when no vGPU exists
Zhenyu Wang [Mon, 15 Jan 2018 08:36:12 +0000 (16:36 +0800)]
drm/i915/gvt: cancel scheduler timer when no vGPU exists

Stop gvt scheduler timer if no vGPU exists, otherwise it keeps
gvt service thread busy to handle request schedule event but no
actual schedule activity required.

Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: cancel virtual vblank timer when no vGPU exists
Zhenyu Wang [Mon, 15 Jan 2018 08:36:11 +0000 (16:36 +0800)]
drm/i915/gvt: cancel virtual vblank timer when no vGPU exists

Stop irq timer for virtual vblank timer emulation if no vGPU exists,
otherwise it will keep gvt service thread busy to handle virtual vblank
but no use.

Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: Keep obj->dma_buf link NULL during exporting
Tina Zhang [Mon, 15 Jan 2018 06:41:42 +0000 (14:41 +0800)]
drm/i915/gvt: Keep obj->dma_buf link NULL during exporting

According to commit (319c933c71f3dbdb2b3274d1634d3494c70efa06)
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Aug 15 00:02:46 2013 +0200

    drm/prime: proper locking+refcounting for obj->dma_buf link

obj->dma_buf link should be reinstated at import time.

Gvt-g dma-buf buffer exposeing might be simpler, as there won't be much
racing during Gvt-g dma-buf exposing. In other words, Gvt-g dma-buf
exposing can guarantee exposing happens before gem close ioctl, and Gvt-g
is the only exporter of the guest framebuffer.

But following the drm prime scheme can give Gvt-g a chance to increase a
dma-buf reference count during importing. Otherwise, we have to increase
the reference during exposing, which will break the case that the only
reference userspace has held was through the dma-buf fd and the reference
count is one.

Signed-off-by: Tina Zhang <tina.zhang@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Cc: Hang Yuan <hang.yuan@intel.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/pmu: Reconstruct active state on starting busy-stats
Chris Wilson [Thu, 11 Jan 2018 07:30:31 +0000 (07:30 +0000)]
drm/i915/pmu: Reconstruct active state on starting busy-stats

We have a hole in our busy-stat accounting if the pmu is enabled during
a long running batch, the pmu will not start accumulating busy-time
until the next context switch. This then fails tests that are only
sampling a single batch.

v2: Count each active port just once (context in/out events are only on
the first and last assignment to a port).
v3: Avoid hardcoding knowledge of 2 submission ports

Fixes: 30e17b7847f5 ("drm/i915: Engine busy time tracking")
Testcase: igt/perf_pmu/busy-start
Testcase: igt/perf_pmu/busy-double-start
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180111073031.14614-1-chris@chris-wilson.co.uk
(cherry picked from commit 4900727d35bb20028f9bd83146ec4bf78afffe30)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915: Stop getting the fault address from RING_FAULT_REG
Oscar Mateo [Fri, 22 Dec 2017 22:38:49 +0000 (14:38 -0800)]
drm/i915: Stop getting the fault address from RING_FAULT_REG

This register does not contain it. Instead, we have to look into FAULT_TLB_DATA0 & 1
(where, by the way, we can also get the address space).

v2: Right formatting
v3:
  - Use 12 (as per the register format) instead of PAGE_SIZE (Chris)
  - s/BITS_44_TO_47/HIGHBITS (Chris)
  - Right formatting, this time for real

Fixes: b03ec3d67ab8 ("drm/i915: There is only one fault register from GEN8 onwards")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/1513982329-32191-1-git-send-email-oscar.mateo@intel.com
Reviewed-by: Michel Thierry <michel.thierry@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 5a3f58dfd1420347be838546e00a4a9e847bda30)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/guc: Add uc_fini_wq in gem_init unwind path
Sagar Arun Kamble [Wed, 10 Jan 2018 12:54:16 +0000 (18:24 +0530)]
drm/i915/guc: Add uc_fini_wq in gem_init unwind path

While moving code around for solving lockdep issue for GuC log relay,
spotted that uc_fini_wq is not being called in failure path in gem_init.
Missed in the below commit. Add it.

v2: Removed GEM_BUG_ON(!HAS_GUC()) from intel_uc_fini_wq as init happens
only based on enable_guc module parameter and does not consider has_guc
capability. (Michal)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Fixes: 3176ff49bc3e ("drm/i915/guc: Move GuC workqueue allocations outside of the mutex")
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515588857-10283-1-git-send-email-sagar.a.kamble@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit da943b5ab071584fcb9cfa896dc8c643d376f362)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915: Fix using BIT_ULL() vs. BIT() for power domain masks
Imre Deak [Tue, 9 Jan 2018 12:20:40 +0000 (14:20 +0200)]
drm/i915: Fix using BIT_ULL() vs. BIT() for power domain masks

The power domain masks are 64 bit wide, so we need BIT_ULL() when
setting bits in them, these ones were missed during converting from 32
to 64 bit masks. All 3 enums are <32 atm, so this didn't cause a real
problem.

Fixes: d8fc70b7367b ("drm/i915: Make power domain masks 64 bit long")
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109122040.19425-1-imre.deak@intel.com
(cherry picked from commit 17bd6e66d8f677b1b250d098097fbed6e70175ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915: Try EDID bitbanging on HDMI after failed read
Stefan Brüns [Sun, 31 Dec 2017 22:34:54 +0000 (23:34 +0100)]
drm/i915: Try EDID bitbanging on HDMI after failed read

The ACK/NACK implementation as found in e.g. the G965 has the falling
clock edge and the release of the data line after the ACK for the received
byte happen at the same time.

This is conformant with the I2C specification, which allows a zero hold
time, see footnote [3]: "A device must internally provide a hold time of
at least 300 ns for the SDA signal (with respect to the V IH(min) of the
SCL signal) to bridge the undefined region of the falling edge of SCL."

Some HDMI-to-VGA converters apparently fail to adhere to this requirement
and latch SDA at the falling clock edge, so instead of an ACK
sometimes a NACK is read and the slave (i.e. the EDID ROM) ends the
transfer.

The bitbanging releases the data line for the ACK only 1/4 bit time after
the falling clock edge, so a slave will see the correct value no matter
if it samples at the rising or the falling clock edge or in the center.

Fallback to bitbanging is already done for the CRT connector.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92685
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/a39f080b-81a5-4c93-b3f7-7cb0a58daca3@rwthex-w2-a.rwth-ad.de
(cherry picked from commit cfb926e148e99acc02351d72e8b85e32b5f786ef)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/glk: Disable Guc and HuC on GLK
Anusha Srivatsa [Wed, 3 Jan 2018 19:03:45 +0000 (11:03 -0800)]
drm/i915/glk: Disable Guc and HuC on GLK

Since the firmwares are not yet released to public repo,
disable them on Geminilake.

v2: Remove the firmware versions (Michal)

v3: Remove unwanted defines (Rodrigo)
Correct commit message (Michal)

Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Fixes: 90f192c8241e ("drm/i915/GuC/GLK: Load GuC on GLK")
Fixes: db5ba0d8931e ("drm/i915/GLK/HuC: Load HuC on GLK")
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1515006225-13003-1-git-send-email-anusha.srivatsa@intel.com
(cherry picked from commit a76050a4837860fcadb6ca11d69d41e08f4090d8)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: Do not use I915_NUM_ENGINES to iterate over the mocs regs array
Michel Thierry [Mon, 8 Jan 2018 18:37:34 +0000 (10:37 -0800)]
drm/i915/gvt: Do not use I915_NUM_ENGINES to iterate over the mocs regs array

The mocs reg array is defined locally but then we iterate over its
elements using I915_NUM_ENGINES. There is no 'hard' connection between
I915_NUM_ENGINES and the regs array and there will be problems if either
of them increases.

Use the size of the mocs reg array instead to safely iterate over it.

Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: Weinan Li <weinan.z.li@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: validate gfn before set shadow page entry
Hang Yuan [Fri, 22 Dec 2017 10:06:31 +0000 (18:06 +0800)]
drm/i915/gvt: validate gfn before set shadow page entry

GVT may receive partial write on one guest PTE update. Validate gfn
not to translate incomplete gfn. This avoids some unnecessary error
messages incurred by the incomplete gfn translating. Also fix the
bug that the whole PPGTT shadow page update is aborted on any invalid
gfn entry.

gfn validation relys on hypervisor's help. Add one MPT module function
to provide the function.

Signed-off-by: Hang Yuan <hang.yuan@intel.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: add PLANE_KEYMAX regs to mmio track list
Pei Zhang [Tue, 26 Dec 2017 06:31:25 +0000 (14:31 +0800)]
drm/i915/gvt: add PLANE_KEYMAX regs to mmio track list

Running 4.15 Linux kernel in VM will cause host GVT reports
'untrack mmio 0x701a0' errror, which identifies the PLANE_KEYMAX
registers. Add them to track list.

v2: rebase to latest staging code.

Signed-off-by: Pei Zhang <pei.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/i915/gvt: Fix gen8/9_render_mmio_list[0] don't take effect
Xiong Zhang [Tue, 26 Dec 2017 21:01:16 +0000 (05:01 +0800)]
drm/i915/gvt: Fix gen8/9_render_mmio_list[0] don't take effect

while(mmio++) increase mmio to next, mmio[0] never take effect
in while loop.

This patch change while to for and fix the above issue.

v2: Correct Fixes format.(Zhenyu)
v3: Rebase to latest staging.(Zhenyu)

Fixes: 83164886e455("drm/i915/gvt: Select appropriate mmio list at initialization time")
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
3 years agodrm/ast: Load lut in crtc_commit
Daniel Vetter [Thu, 18 Jan 2018 15:40:16 +0000 (16:40 +0100)]
drm/ast: Load lut in crtc_commit

In the past the ast driver relied upon the fbdev emulation helpers to
call ->load_lut at boot-up. But since

commit b8e2b0199cc377617dc238f5106352c06dcd3fa2
Author: Peter Rosin <peda@axentia.se>
Date:   Tue Jul 4 12:36:57 2017 +0200

    drm/fb-helper: factor out pseudo-palette

that's cleaned up and drivers are expected to boot into a consistent
lut state. This patch fixes that.

Fixes: b8e2b0199cc3 ("drm/fb-helper: factor out pseudo-palette")
Cc: Peter Rosin <peda@axenita.se>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: <stable@vger.kernel.org> # v4.14+
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198123
Cc: Bill Fraser <bill.fraser@gmail.com>
Reported-and-Tested-by: Bill Fraser <bill.fraser@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
3 years agoMerge tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm...
Dave Airlie [Thu, 1 Feb 2018 01:34:47 +0000 (11:34 +1000)]
Merge tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

This contains a fix to restrict what lessee can do with masters and
another one when waiting for timeouts on reservation objects.

* tag 'drm-misc-next-fixes-2018-01-31' of git://anongit.freedesktop.org/drm/drm-misc:
  drm: Check for lessee in DROP_MASTER ioctl
  dma-buf: fix reservation_object_wait_timeout_rcu once more v2

3 years agodrm: Check for lessee in DROP_MASTER ioctl
Keith Packard [Fri, 19 Jan 2018 01:51:59 +0000 (17:51 -0800)]
drm: Check for lessee in DROP_MASTER ioctl

Don't let a lessee control what the current DRM master is set to;
that's the job of the "real" master. Otherwise, the lessee would
disable all access to master operations for the owner and all lessees
under it.

This matches the same check made in the SET_MASTER ioctl.

Signed-off-by: Keith Packard <keithp@keithp.com>
Fixes: 2ed077e467ee ("drm: Add drm_object lease infrastructure [v5]")
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119015159.1606-1-keithp@keithp.com
3 years agodrm/amdgpu: disable coarse grain clockgating for ST
Shirish S [Fri, 19 Jan 2018 08:47:22 +0000 (14:17 +0530)]
drm/amdgpu: disable coarse grain clockgating for ST

The CGCG feature  on Stoney is causing GFX related
issues such as freezes and blank outs.

Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Arindam Nath <arindam.nath@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/radeon: adjust tested variable
Julia Lawall [Sat, 27 Jan 2018 14:28:15 +0000 (15:28 +0100)]
drm/radeon: adjust tested variable

Check the variable that was most recently initialized.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x, y, f, g, e, m;
statement S1,S2,S3,S4;
@@

x = f(...);
if (\(<+...x...+>\&e\)) S1 else S2
(
x = g(...);
|
m = g(...,&x,...);
|
y = g(...);
*if (e)
 S3 else S4
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
3 years agodrm/amdgpu: remove WARN_ON when VM isn't found v2
Christian König [Wed, 24 Jan 2018 12:38:52 +0000 (13:38 +0100)]
drm/amdgpu: remove WARN_ON when VM isn't found v2

It can easily be that the VM is already destroyed when this runs.

v2: fix test inversion

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: fix locking in vega10_ih_prescreen_iv
Christian König [Wed, 24 Jan 2018 12:37:48 +0000 (13:37 +0100)]
drm/amdgpu: fix locking in vega10_ih_prescreen_iv

The vm pointer can become invalid as soon as the lock is released.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: fix another potential cause of VM faults
Christian König [Wed, 24 Jan 2018 13:57:02 +0000 (14:57 +0100)]
drm/amdgpu: fix another potential cause of VM faults

The root PD can be evicted directly after allocating it, just validate
it on first use.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: use queue 0 for kiq ring
Huang Rui [Fri, 15 Dec 2017 01:33:21 +0000 (09:33 +0800)]
drm/amdgpu: use queue 0 for kiq ring

It must use queue id 0, because CGPG_IDLE/SAVE/LOAD/RUN only can be issued on
queue 0.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/ttm: Fix 'buf' pointer update in ttm_bo_vm_access_kmap() (v2)
Tom St Denis [Fri, 26 Jan 2018 14:32:29 +0000 (09:32 -0500)]
drm/ttm: Fix 'buf' pointer update in ttm_bo_vm_access_kmap() (v2)

The buf pointer was not being incremented inside the loop
meaning the same block of data would be read or written
repeatedly.

(v2) Change 'buf' pointer to uint8_t* type

Cc: stable@vger.kernel.org
Fixes: 09ac4fcb3f25 ("drm/ttm: Implement vm_operations_struct.access v2")

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/ttm: fix missing parameter change for ttm_bo_cleanup_refs
Roger He [Fri, 19 Jan 2018 06:34:16 +0000 (14:34 +0800)]
drm/ttm: fix missing parameter change for ttm_bo_cleanup_refs

Missed in the patche:
dc94777 drm/ttm: enable swapout for reserved BOs during allocation.
don't unreserve the BO if it is not reserved by itself.

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoMerge tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm...
Dave Airlie [Thu, 25 Jan 2018 01:42:25 +0000 (11:42 +1000)]
Merge tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Fixes for 4.16:

Fixes one Kconfig issue and a enable some panels to work properly.
There is also a fix of error code return in sun4i.

* tag 'drm-misc-next-fixes-2018-01-18' of git://anongit.freedesktop.org/drm/drm-misc:
  drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
  drm/panel: lvds: Handle the optional regulator case properly
  drm/sun4i: Fix error code in sun4i_tcon_bind()

3 years agoMerge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Thu, 25 Jan 2018 01:40:54 +0000 (11:40 +1000)]
Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux into drm-next

 A few more fixes for 4.16, nothing major.

A few more fixes for 4.16.  This is on top of the pull request from
last week.  Most notable change here is a fix to the link order for
the now separate from amdgpu GPU scheduler to fix crashes when the
modules are build into the kernel rather than as modules.

* 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux:
  drm: fix gpu scheduler link order
  drm/amd/display: Demote error print to debug print when ATOM impl missing
  drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
  drm/amd/amdgpu: Add Polaris version check
  drm/amdgpu: Reenable manual GPU reset from sysfs
  drm/amdgpu: disable MMHUB power gating on raven
  drm/ttm: Don't unreserve swapped BOs that were previously reserved
  drm/ttm: Don't add swapped BOs to swap-LRU list
  drm/amdgpu: only check for ECC on Vega10
  drm/amd/powerplay: Fix smu_table_entry.handle type
  drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
  drm/radeon: fill in rb backend map on evergreen/ni.
  drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
  drm/ttm: only free pages rather than update global memory count together
  drm/amdgpu: fix CPU based VM updates
  drm/amdgpu: fix typo in amdgpu_vce_validate_bo
  drm/amdgpu: fix amdgpu_vm_pasid_fault_credit
  drm/ttm: check the return value of register_shrinker
  drm/radeon: fix sparse warning: Should it be static?

3 years agodrm: fix gpu scheduler link order
Christian König [Wed, 24 Jan 2018 10:44:49 +0000 (11:44 +0100)]
drm: fix gpu scheduler link order

It should initialize before the drivers using it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=104736
Reviewed-by: Mike Lothian <mike@fireburn.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amd/display: Demote error print to debug print when ATOM impl missing
Harry Wentland [Wed, 3 Jan 2018 14:58:58 +0000 (09:58 -0500)]
drm/amd/display: Demote error print to debug print when ATOM impl missing

I assumed wrongfully that all relevant functions should be implemented.
Apparently this isn't the case. Demote the print to debug level for now.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodma-buf: fix reservation_object_wait_timeout_rcu once more v2
Christian König [Mon, 22 Jan 2018 20:00:03 +0000 (21:00 +0100)]
dma-buf: fix reservation_object_wait_timeout_rcu once more v2

We need to set shared_count even if we already have a fence to wait for.

v2: init i to -1 as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180122200003.6665-1-christian.koenig@amd.com
3 years agodrm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
Alex Deucher [Tue, 23 Jan 2018 04:13:32 +0000 (23:13 -0500)]
drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)

We only support vga_switcheroo and runtime pm on PX/HG systems
so forcing runpm to 1 doesn't do anything useful anyway.

Only call vga_switcheroo_init_domain_pm_ops() for PX/HG so
that the cleanup path is correct as well.  This mirrors what
radeon does as well.

v2: rework the patch originally sent by Lukas (Alex)

Acked-by: Lukas Wunner <lukas@wunner.de>
Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de> (v1)
Cc: stable@vger.kernel.org
3 years agodrm/amd/amdgpu: Add Polaris version check
James Zhu [Mon, 22 Jan 2018 18:46:16 +0000 (13:46 -0500)]
drm/amd/amdgpu: Add Polaris version check

Add Polaris version check if firmware support UVD encode

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: James Zhu <James.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
3 years agodrm/amdgpu: Reenable manual GPU reset from sysfs
Andrey Grodzovsky [Fri, 19 Jan 2018 22:23:08 +0000 (17:23 -0500)]
drm/amdgpu: Reenable manual GPU reset from sysfs

Otherwise it keeps rejecting the reset.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: disable MMHUB power gating on raven
Huang Rui [Thu, 14 Dec 2017 05:47:16 +0000 (13:47 +0800)]
drm/amdgpu: disable MMHUB power gating on raven

MMHUB power gating still has issue, and doesn't work on raven at current. So
disable it for the moment.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Acked-by: Hawking Zhang <Hawking.Zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
3 years agodrm/ttm: Don't unreserve swapped BOs that were previously reserved
Felix Kuehling [Thu, 18 Jan 2018 04:54:07 +0000 (23:54 -0500)]
drm/ttm: Don't unreserve swapped BOs that were previously reserved

If ttm_bo_swapout doesn't own the lock, don't release it. Someone
else probably depends on it still being locked.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/ttm: Don't add swapped BOs to swap-LRU list
Felix Kuehling [Thu, 18 Jan 2018 04:52:03 +0000 (23:52 -0500)]
drm/ttm: Don't add swapped BOs to swap-LRU list

A BO that's already swapped would be added back to the swap-LRU list
for example if its validation failed under high memory pressure. This
could later lead to swapping it out again and leaking previous swap
storage.

This commit adds a condition to prevent that from happening.

v2: Check page_flags instead of swap_storage

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
3 years agodrm/amdgpu: only check for ECC on Vega10
Alex Deucher [Wed, 17 Jan 2018 14:07:29 +0000 (09:07 -0500)]
drm/amdgpu: only check for ECC on Vega10

RV doesn't support it.

Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
3 years agodrm/amd/powerplay: Fix smu_table_entry.handle type
Andrey Grodzovsky [Wed, 17 Jan 2018 22:24:13 +0000 (17:24 -0500)]
drm/amd/powerplay: Fix smu_table_entry.handle type

The handle describes kernel logical address, should be
unsigned long and not uint32_t.
Fixes KASAN error and GFP on driver unload.

Reviewed-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
3 years agodrm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
Roger He [Mon, 15 Jan 2018 05:06:38 +0000 (13:06 +0800)]
drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count

add this for correctly updating global mem count in ttm_mem_zone.
before that when ttm_mem_global_alloc_page fails, we would update all
dma_page's global mem count in ttm_dma->pages_list. but actually here
we should not update for the last dma_page.

v2: only the update of last dma_page is not right
v3: use lower bits of dma_page vaddr

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agoMerge tag 'drm-amdkfd-next-fixes-2018-01-15' of git://people.freedesktop.org/~gabbayo...
Dave Airlie [Thu, 18 Jan 2018 03:30:48 +0000 (13:30 +1000)]
Merge tag 'drm-amdkfd-next-fixes-2018-01-15' of git://people.freedesktop.org/~gabbayo/linux into drm-next

- fix NULL pointer dereference
- fix compiler warning on large define values
- remove unnecessary call to execute_queues_cpsch

* tag 'drm-amdkfd-next-fixes-2018-01-15' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: Fix potential NULL pointer dereferences
  drm/amdkfd: add ull suffix to 64bit defines
  drm/amdkfd: don't always call execute_queues_cpsch()
  drm/amdkfd: Fix return value 0 when execute_queues_cpsch fails

3 years agoBackMerge tag 'v4.15-rc8' into drm-next
Dave Airlie [Wed, 17 Jan 2018 23:32:15 +0000 (09:32 +1000)]
BackMerge tag 'v4.15-rc8' into drm-next

Linux 4.15-rc8

Daniel requested this for so the intel CI won't fall over on drm-next
so often.

3 years agodrm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
Hans de Goede [Wed, 17 Jan 2018 08:10:32 +0000 (09:10 +0100)]
drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig

All Kconfig menu menu entries should have a depends on MENU_OPTION, the
menu stops after the first Kconfig entry without this depends on.

Since the PANEL_ORIENTATION_QUIRKS option is also used outside of DRM,
it deliberately does not have a depends on DRM, but this causes all
items after it to show as separate items rather then under the DRM
menuconfig.

This commit moves PANEL_ORIENTATION_QUIRKS to the end of the drm Kconfig
file, grouping it with DRM_LIB_RANDOM which also does not depend on DRM,
fixing the DRM menuconfig.

Fixes: 404d1a3edc38 ("drm: Add panel orientation quirks, v6.")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117081032.6411-1-hdegoede@redhat.com
3 years agodrm/radeon: fill in rb backend map on evergreen/ni.
Dave Airlie [Tue, 9 Jan 2018 03:43:03 +0000 (13:43 +1000)]
drm/radeon: fill in rb backend map on evergreen/ni.

This looks to have never gotten filled in, and it seems to
 trigger a bug in mesa.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reported-by: Roland Scheidegger <sroland@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
Junwei Zhang [Wed, 10 Jan 2018 05:45:19 +0000 (13:45 +0800)]
drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)

v2: fix register access

Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Ken Wang <ken.wang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/ttm: only free pages rather than update global memory count together
Roger He [Thu, 11 Jan 2018 09:00:14 +0000 (17:00 +0800)]
drm/ttm: only free pages rather than update global memory count together

if ttm_get_pages or ttm_mem_global_alloc_page fail, should not update
global memory count.

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: fix CPU based VM updates
Christian König [Tue, 16 Jan 2018 14:35:10 +0000 (15:35 +0100)]
drm/amdgpu: fix CPU based VM updates

That got accidentially removed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/amdgpu: fix typo in amdgpu_vce_validate_bo
Christian König [Tue, 16 Jan 2018 10:00:12 +0000 (11:00 +0100)]
drm/amdgpu: fix typo in amdgpu_vce_validate_bo

Otherwise buffer placement is very restrictive and might fail.

Fixes: "drm/amdgpu: fix VCE buffer placement restrictions v2"

Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Deng, Emily <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
3 years agodrm/amdgpu: fix amdgpu_vm_pasid_fault_credit
Christian König [Tue, 9 Jan 2018 18:18:59 +0000 (19:18 +0100)]
drm/amdgpu: fix amdgpu_vm_pasid_fault_credit

As soon as the lock is dropped the VM pointer can be invalid.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/ttm: check the return value of register_shrinker
Roger He [Thu, 11 Jan 2018 04:57:58 +0000 (12:57 +0800)]
drm/ttm: check the return value of register_shrinker

This fixes the build warning:
"ignoring return value of 'register_shrinker', declared with
attribute warn_unused_result [-Wunused-result]"

Signed-off-by: Roger He <Hongbo.He@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/radeon: fix sparse warning: Should it be static?
Dmitry Rozhkov [Tue, 2 Jan 2018 08:02:51 +0000 (10:02 +0200)]
drm/radeon: fix sparse warning: Should it be static?

Impact: make symbol static.

Fix this sparse warning:
  drivers/gpu/drm/radeon/radeon_dp_mst.c:332:38: warning: symbol 'mst_cbs' was not declared. Should it be static?

Signed-off-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
3 years agodrm/panel: lvds: Handle the optional regulator case properly
Maxime Ripard [Wed, 10 Jan 2018 15:59:41 +0000 (16:59 +0100)]
drm/panel: lvds: Handle the optional regulator case properly

The devm_regulator_get_optional function, unlike it was assumed in the
commit a1c55bccf600 ("drm/panel: lvds: Add support for the power-supply
property"), is actually returning an error pointer with -ENODEV instead of
NULL when there's no regulator to find.

Make sure we handle that case properly.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: a1c55bccf600 ("drm/panel: lvds: Add support for the power-supply property")
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180110155941.16109-1-maxime.ripard@free-electrons.com
3 years agodrm/sun4i: Fix error code in sun4i_tcon_bind()
Dan Carpenter [Mon, 15 Jan 2018 08:11:13 +0000 (11:11 +0300)]
drm/sun4i: Fix error code in sun4i_tcon_bind()

We accidentally passed the wrong variable to PTR_ERR().

Fixes: a0c1214e4764 ("drm/sun4i: Add LVDS support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115081113.wlam5wkmdynisf4r@mwanda
3 years agoLinux 4.15-rc8 v4.15-rc8
Linus Torvalds [Sun, 14 Jan 2018 23:32:30 +0000 (15:32 -0800)]
Linux 4.15-rc8

3 years agoMerge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 14 Jan 2018 23:30:02 +0000 (15:30 -0800)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixlet from Thomas Gleixner.

Remove a warning about lack of compiler support for retpoline that most
people can't do anything about, so it just annoys them needlessly.

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Remove compile time warning

3 years agoMerge tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Sun, 14 Jan 2018 23:03:17 +0000 (15:03 -0800)]
Merge tag 'powerpc-4.15-7' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "One fix for an oops at boot if we take a hotplug interrupt before we
  are ready to handle it.

  The bulk is patches to implement mitigation for Meltdown, see the
  change logs for more details.

  Thanks to: Nicholas Piggin, Michael Neuling, Oliver O'Halloran, Jon
  Masters, Jose Ricardo Ziviani, David Gibson"

* tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Check device-tree for RFI flush settings
  powerpc/pseries: Query hypervisor for RFI flush settings
  powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti
  powerpc/64s: Add support for RFI flush of L1-D cache
  powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL
  powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL
  powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL
  powerpc/64s: Simple RFI macro conversions
  powerpc/64: Add macros for annotating the destination of rfid/hrfid
  powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper
  powerpc/pseries: Make RAS IRQ explicitly dependent on DLPAR WQ

3 years agox86/retpoline: Remove compile time warning
Thomas Gleixner [Sun, 14 Jan 2018 21:13:29 +0000 (22:13 +0100)]
x86/retpoline: Remove compile time warning

Remove the compile time warning when CONFIG_RETPOLINE=y and the compiler
does not have retpoline support. Linus rationale for this is:

  It's wrong because it will just make people turn off RETPOLINE, and the
  asm updates - and return stack clearing - that are independent of the
  compiler are likely the most important parts because they are likely the
  ones easiest to target.

  And it's annoying because most people won't be able to do anything about
  it. The number of people building their own compiler? Very small. So if
  their distro hasn't got a compiler yet (and pretty much nobody does), the
  warning is just annoying crap.

  It is already properly reported as part of the sysfs interface. The
  compile-time warning only encourages bad things.

Fixes: 76b043848fd2 ("x86/retpoline: Add initial retpoline support")
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/CA+55aFzWgquv4i6Mab6bASqYXg3ErV3XDFEYf=GEcCDQg5uAtw@mail.gmail.com
3 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Sun, 14 Jan 2018 18:22:45 +0000 (10:22 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull NVMe fix from Jens Axboe:
 "Just a single fix for nvme over fabrics that should go into 4.15"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme-fabrics: initialize default host->id in nvmf_host_default()

3 years agoMerge branch 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 14 Jan 2018 17:51:25 +0000 (09:51 -0800)]
Merge branch 'x86-pti-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 pti updates from Thomas Gleixner:
 "This contains:

   - a PTI bugfix to avoid setting reserved CR3 bits when PCID is
     disabled. This seems to cause issues on a virtual machine at least
     and is incorrect according to the AMD manual.

   - a PTI bugfix which disables the perf BTS facility if PTI is
     enabled. The BTS AUX buffer is not globally visible and causes the
     CPU to fault when the mapping disappears on switching CR3 to user
     space. A full fix which restores BTS on PTI is non trivial and will
     be worked on.

   - PTI bugfixes for EFI and trusted boot which make sure that the user
     space visible page table entries have the NX bit cleared

   - removal of dead code in the PTI pagetable setup functions

   - add PTI documentation

   - add a selftest for vsyscall to verify that the kernel actually
     implements what it advertises.

   - a sysfs interface to expose vulnerability and mitigation
     information so there is a coherent way for users to retrieve the
     status.

   - the initial spectre_v2 mitigations, aka retpoline:

      + The necessary ASM thunk and compiler support

      + The ASM variants of retpoline and the conversion of affected ASM
        code

      + Make LFENCE serializing on AMD so it can be used as speculation
        trap

      + The RSB fill after vmexit

   - initial objtool support for retpoline

  As I said in the status mail this is the most of the set of patches
  which should go into 4.15 except two straight forward patches still on
  hold:

   - the retpoline add on of LFENCE which waits for ACKs

   - the RSB fill after context switch

  Both should be ready to go early next week and with that we'll have
  covered the major holes of spectre_v2 and go back to normality"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  x86,perf: Disable intel_bts when PTI
  security/Kconfig: Correct the Documentation reference for PTI
  x86/pti: Fix !PCID and sanitize defines
  selftests/x86: Add test_vsyscall
  x86/retpoline: Fill return stack buffer on vmexit
  x86/retpoline/irq32: Convert assembler indirect jumps
  x86/retpoline/checksum32: Convert assembler indirect jumps
  x86/retpoline/xen: Convert Xen hypercall indirect jumps
  x86/retpoline/hyperv: Convert assembler indirect jumps
  x86/retpoline/ftrace: Convert ftrace assembler indirect jumps
  x86/retpoline/entry: Convert entry assembler indirect jumps
  x86/retpoline/crypto: Convert crypto assembler indirect jumps
  x86/spectre: Add boot time option to select Spectre v2 mitigation
  x86/retpoline: Add initial retpoline support
  objtool: Allow alternatives to be ignored
  objtool: Detect jumps to retpoline thunks
  x86/pti: Make unpoison of pgd for trusted boot work for real
  x86/alternatives: Fix optimize_nops() checking
  sysfs/cpu: Fix typos in vulnerability documentation
  x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC
  ...

3 years agox86,perf: Disable intel_bts when PTI
Peter Zijlstra [Sun, 14 Jan 2018 10:27:13 +0000 (11:27 +0100)]
x86,perf: Disable intel_bts when PTI

The intel_bts driver does not use the 'normal' BTS buffer which is exposed
through the cpu_entry_area but instead uses the memory allocated for the
perf AUX buffer.

This obviously comes apart when using PTI because then the kernel mapping;
which includes that AUX buffer memory; disappears. Fixing this requires to
expose a mapping which is visible in all context and that's not trivial.

As a quick fix disable this driver when PTI is enabled to prevent
malfunction.

Fixes: 385ce0ea4c07 ("x86/mm/pti: Add Kconfig")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: greg@kroah.com
Cc: hughd@google.com
Cc: luto@amacapital.net
Cc: Vince Weaver <vince@deater.net>
Cc: torvalds@linux-foundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180114102713.GB6166@worktop.programming.kicks-ass.net