sfrench/cifs-2.6.git
3 years agobtrfs: Make flush bios explicitely sync
Jan Kara [Tue, 2 May 2017 15:03:50 +0000 (17:03 +0200)]
btrfs: Make flush bios explicitely sync

Commit b685d3d65ac7 "block: treat REQ_FUA and REQ_PREFLUSH as
synchronous" removed REQ_SYNC flag from WRITE_{FUA|PREFLUSH|...}
definitions.  generic_make_request_checks() however strips REQ_FUA and
REQ_PREFLUSH flags from a bio when the storage doesn't report volatile
write cache and thus write effectively becomes asynchronous which can
lead to performance regressions

Fix the problem by making sure all bios which are synchronous are
properly marked with REQ_SYNC.

CC: David Sterba <dsterba@suse.com>
CC: linux-btrfs@vger.kernel.org
Fixes: b685d3d65ac791406e0dfd8779cc9b3707fea5a3
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: fiemap: Cache and merge fiemap extent before submit it to user
Qu Wenruo [Fri, 7 Apr 2017 02:43:15 +0000 (10:43 +0800)]
btrfs: fiemap: Cache and merge fiemap extent before submit it to user

[BUG]
Cycle mount btrfs can cause fiemap to return different result.
Like:
 # mount /dev/vdb5 /mnt/btrfs
 # dd if=/dev/zero bs=16K count=4 oflag=dsync of=/mnt/btrfs/file
 # xfs_io -c "fiemap -v" /mnt/btrfs/file
 /mnt/test/file:
 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..127]:        25088..25215       128   0x1
 # umount /mnt/btrfs
 # mount /dev/vdb5 /mnt/btrfs
 # xfs_io -c "fiemap -v" /mnt/btrfs/file
 /mnt/test/file:
 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..31]:         25088..25119        32   0x0
   1: [32..63]:        25120..25151        32   0x0
   2: [64..95]:        25152..25183        32   0x0
   3: [96..127]:       25184..25215        32   0x1
But after above fiemap, we get correct merged result if we call fiemap
again.
 # xfs_io -c "fiemap -v" /mnt/btrfs/file
 /mnt/test/file:
 EXT: FILE-OFFSET      BLOCK-RANGE      TOTAL FLAGS
   0: [0..127]:        25088..25215       128   0x1

[REASON]
Btrfs will try to merge extent map when inserting new extent map.

btrfs_fiemap(start=0 len=(u64)-1)
|- extent_fiemap(start=0 len=(u64)-1)
   |- get_extent_skip_holes(start=0 len=64k)
   |  |- btrfs_get_extent_fiemap(start=0 len=64k)
   |     |- btrfs_get_extent(start=0 len=64k)
   |        |  Found on-disk (ino, EXTENT_DATA, 0)
   |        |- add_extent_mapping()
   |        |- Return (em->start=0, len=16k)
   |
   |- fiemap_fill_next_extent(logic=0 phys=X len=16k)
   |
   |- get_extent_skip_holes(start=0 len=64k)
   |  |- btrfs_get_extent_fiemap(start=0 len=64k)
   |     |- btrfs_get_extent(start=16k len=48k)
   |        |  Found on-disk (ino, EXTENT_DATA, 16k)
   |        |- add_extent_mapping()
   |        |  |- try_merge_map()
   |        |     Merge with previous em start=0 len=16k
   |        |     resulting em start=0 len=32k
   |        |- Return (em->start=0, len=32K)    << Merged result
   |- Stripe off the unrelated range (0~16K) of return em
   |- fiemap_fill_next_extent(logic=16K phys=X+16K len=16K)
      ^^^ Causing split fiemap extent.

And since in add_extent_mapping(), em is already merged, in next
fiemap() call, we will get merged result.

[FIX]
Here we introduce a new structure, fiemap_cache, which records previous
fiemap extent.

And will always try to merge current fiemap_cache result before calling
fiemap_fill_next_extent().
Only when we failed to merge current fiemap extent with cached one, we
will call fiemap_fill_next_extent() to submit cached one.

So by this method, we can merge all fiemap extents.

It can also be done in fs/ioctl.c, however the problem is if
fieinfo->fi_extents_max == 0, we have no space to cache previous fiemap
extent.
So I choose to merge it in btrfs.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: fix the gfp_mask for the reada_zones radix tree
Chris Mason [Thu, 4 May 2017 23:08:08 +0000 (16:08 -0700)]
btrfs: fix the gfp_mask for the reada_zones radix tree

Commits cc8385b59e17 and 7ef70b4d9987a7 added preallocation for the
reada radix trees and also switched them over to GFP_KERNEL for the
default gfp mask.

Since we're doing radix tree insertions under spinlocks, we need
to make sure the mask doesn't allow sleeping.  This fix keeps
the radix preallocation but switches back to the original gfp_mask.

Reported-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
4 years agoMerge branch 'for-chris-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmana...
Chris Mason [Thu, 27 Apr 2017 21:13:09 +0000 (14:13 -0700)]
Merge branch 'for-chris-4.12' of git://git./linux/kernel/git/fdmanana/linux into for-linus-4.12

4 years agoBtrfs: fix reported number of inode blocks
Filipe Manana [Mon, 3 Apr 2017 09:45:46 +0000 (10:45 +0100)]
Btrfs: fix reported number of inode blocks

Currently when there are buffered writes that were not yet flushed and
they fall within allocated ranges of the file (that is, not in holes or
beyond eof assuming there are no prealloc extents beyond eof), btrfs
simply reports an incorrect number of used blocks through the stat(2)
system call (or any of its variants), regardless of mount options or
inode flags (compress, compress-force, nodatacow). This is because the
number of blocks used that is reported is based on the current number
of bytes in the vfs inode plus the number of dealloc bytes in the btrfs
inode. The later covers bytes that both fall within allocated regions
of the file and holes.

Example scenarios where the number of reported blocks is wrong while the
buffered writes are not flushed:

  $ mkfs.btrfs -f /dev/sdc
  $ mount /dev/sdc /mnt/sdc

  $ xfs_io -f -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo1
  wrote 65536/65536 bytes at offset 0
  64 KiB, 16 ops; 0.0000 sec (259.336 MiB/sec and 66390.0415 ops/sec)

  $ sync

  $ xfs_io -c "pwrite -S 0xbb 0 64K" /mnt/sdc/foo1
  wrote 65536/65536 bytes at offset 0
  64 KiB, 16 ops; 0.0000 sec (192.308 MiB/sec and 49230.7692 ops/sec)

  # The following should have reported 64K...
  $ du -h /mnt/sdc/foo1
  128K /mnt/sdc/foo1

  $ sync

  # After flushing the buffered write, it now reports the correct value.
  $ du -h /mnt/sdc/foo1
  64K /mnt/sdc/foo1

  $ xfs_io -f -c "falloc -k 0 128K" -c "pwrite -S 0xaa 0 64K" /mnt/sdc/foo2
  wrote 65536/65536 bytes at offset 0
  64 KiB, 16 ops; 0.0000 sec (520.833 MiB/sec and 133333.3333 ops/sec)

  $ sync

  $ xfs_io -c "pwrite -S 0xbb 64K 64K" /mnt/sdc/foo2
  wrote 65536/65536 bytes at offset 65536
  64 KiB, 16 ops; 0.0000 sec (260.417 MiB/sec and 66666.6667 ops/sec)

  # The following should have reported 128K...
  $ du -h /mnt/sdc/foo2
  192K /mnt/sdc/foo2

  $ sync

  # After flushing the buffered write, it now reports the correct value.
  $ du -h /mnt/sdc/foo2
  128K /mnt/sdc/foo2

So the number of used file blocks is simply incorrect, unlike in other
filesystems such as ext4 and xfs for example, but only while the buffered
writes are not flushed.

Fix this by tracking the number of delalloc bytes that fall within holes
and beyond eof of a file, and use instead this new counter when reporting
the number of used blocks for an inode.

Another different problem that exists is that the delalloc bytes counter
is reset when writeback starts (by clearing the EXTENT_DEALLOC flag from
the respective range in the inode's iotree) and the vfs inode's bytes
counter is only incremented when writeback finishes (through
insert_reserved_file_extent()). Therefore while writeback is ongoing we
simply report a wrong number of blocks used by an inode if the write
operation covers a range previously unallocated. While this change does
not fix this problem, it does minimizes it a lot by shortening that time
window, as the new dealloc bytes counter (new_delalloc_bytes) is only
decremented when writeback finishes right before updating the vfs inode's
bytes counter. Fully fixing this second problem is not trivial and will
be addressed later by a different patch.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
4 years agoBtrfs: send, fix file hole not being preserved due to inline extent
Filipe Manana [Tue, 4 Apr 2017 19:31:00 +0000 (20:31 +0100)]
Btrfs: send, fix file hole not being preserved due to inline extent

Normally we don't have inline extents followed by regular extents, but
there's currently at least one harmless case where this happens. For
example, when the page size is 4Kb and compression is enabled:

  $ mkfs.btrfs -f /dev/sdb
  $ mount -o compress /dev/sdb /mnt
  $ xfs_io -f -c "pwrite -S 0xaa 0 4K" -c "fsync" /mnt/foobar
  $ xfs_io -c "pwrite -S 0xbb 8K 4K" -c "fsync" /mnt/foobar

In this case we get a compressed inline extent, representing 4Kb of
data, followed by a hole extent and then a regular data extent. The
inline extent was not expanded/converted to a regular extent exactly
because it represents 4Kb of data. This does not cause any apparent
problem (such as the issue solved by commit e1699d2d7bf6
("btrfs: add missing memset while reading compressed inline extents"))
except trigger an unexpected case in the incremental send code path
that makes us issue an operation to write a hole when it's not needed,
resulting in more writes at the receiver and wasting space at the
receiver.

So teach the incremental send code to deal with this particular case.

The issue can be currently triggered by running fstests btrfs/137 with
compression enabled (MOUNT_OPTIONS="-o compress" ./check btrfs/137).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
4 years agoBtrfs: fix extent map leak during fallocate error path
Filipe Manana [Mon, 3 Apr 2017 14:57:17 +0000 (15:57 +0100)]
Btrfs: fix extent map leak during fallocate error path

If the call to btrfs_qgroup_reserve_data() failed, we were leaking an
extent map structure. The failure can happen either due to an -ENOMEM
condition or, when quotas are enabled, due to -EDQUOT for example.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: fix incorrect space accounting after failure to insert inline extent
Filipe Manana [Wed, 8 Mar 2017 16:43:49 +0000 (16:43 +0000)]
Btrfs: fix incorrect space accounting after failure to insert inline extent

When using compression, if we fail to insert an inline extent we
incorrectly end up attempting to free the reserved data space twice,
once through extent_clear_unlock_delalloc(), because we pass it the
flag EXTENT_DO_ACCOUNTING, and once through a direct call to
btrfs_free_reserved_data_space_noquota(). This results in a trace
like the following:

[  834.576240] ------------[ cut here ]------------
[  834.576825] WARNING: CPU: 2 PID: 486 at fs/btrfs/extent-tree.c:4316 btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  834.579501] Modules linked in: btrfs crc32c_generic xor raid6_pq ppdev i2c_piix4 acpi_cpufreq psmouse tpm_tis parport_pc pcspkr serio_raw tpm_tis_core sg parport evdev i2c_core tpm button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio scsi_mod e1000 floppy [last unloaded: btrfs]
[  834.592116] CPU: 2 PID: 486 Comm: kworker/u32:4 Not tainted 4.10.0-rc8-btrfs-next-37+ #2
[  834.593316] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[  834.595273] Workqueue: btrfs-delalloc btrfs_delalloc_helper [btrfs]
[  834.596103] Call Trace:
[  834.596103]  dump_stack+0x67/0x90
[  834.596103]  __warn+0xc2/0xdd
[  834.596103]  warn_slowpath_null+0x1d/0x1f
[  834.596103]  btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  834.596103]  compress_file_range.constprop.42+0x2fa/0x3fc [btrfs]
[  834.596103]  ? submit_compressed_extents+0x3a7/0x3a7 [btrfs]
[  834.596103]  async_cow_start+0x32/0x4d [btrfs]
[  834.596103]  btrfs_scrubparity_helper+0x187/0x3e7 [btrfs]
[  834.596103]  btrfs_delalloc_helper+0xe/0x10 [btrfs]
[  834.596103]  process_one_work+0x273/0x4e4
[  834.596103]  worker_thread+0x1eb/0x2ca
[  834.596103]  ? rescuer_thread+0x2b6/0x2b6
[  834.596103]  kthread+0x100/0x108
[  834.596103]  ? __list_del_entry+0x22/0x22
[  834.596103]  ret_from_fork+0x2e/0x40
[  834.611656] ---[ end trace 719902fe6bdef08f ]---

So fix this by not calling directly btrfs_free_reserved_data_space_noquota()
if an error happened.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
4 years agoBtrfs: fix invalid attempt to free reserved space on failure to cow range
Filipe Manana [Mon, 6 Mar 2017 23:04:20 +0000 (23:04 +0000)]
Btrfs: fix invalid attempt to free reserved space on failure to cow range

When attempting to COW a file range (we are starting writeback and doing
COW), if we manage to reserve an extent for the range we will write into
but fail after reserving it and before creating the respective ordered
extent, we end up in an error path where we attempt to decrement the
data space's bytes_may_use counter after we already did it while
reserving the extent, leading to a warning/trace like the following:

[  847.621524] ------------[ cut here ]------------
[  847.625441] WARNING: CPU: 5 PID: 4905 at fs/btrfs/extent-tree.c:4316 btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  847.633704] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq i2c_piix4 ppdev psmouse tpm_tis serio_raw pcspkr parport_pc tpm_tis_core i2c_core sg
[  847.644616] CPU: 5 PID: 4905 Comm: xfs_io Not tainted 4.10.0-rc8-btrfs-next-37+ #2
[  847.648601] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[  847.648601] Call Trace:
[  847.648601]  dump_stack+0x67/0x90
[  847.648601]  __warn+0xc2/0xdd
[  847.648601]  warn_slowpath_null+0x1d/0x1f
[  847.648601]  btrfs_free_reserved_data_space_noquota+0x60/0x9f [btrfs]
[  847.648601]  btrfs_clear_bit_hook+0x140/0x258 [btrfs]
[  847.648601]  clear_state_bit+0x87/0x128 [btrfs]
[  847.648601]  __clear_extent_bit+0x222/0x2b7 [btrfs]
[  847.648601]  clear_extent_bit+0x17/0x19 [btrfs]
[  847.648601]  extent_clear_unlock_delalloc+0x3b/0x6b [btrfs]
[  847.648601]  cow_file_range.isra.39+0x387/0x39a [btrfs]
[  847.648601]  run_delalloc_nocow+0x4d7/0x70e [btrfs]
[  847.648601]  ? arch_local_irq_save+0x9/0xc
[  847.648601]  run_delalloc_range+0xa7/0x2b5 [btrfs]
[  847.648601]  writepage_delalloc.isra.31+0xb9/0x15c [btrfs]
[  847.648601]  __extent_writepage+0x249/0x2e8 [btrfs]
[  847.648601]  extent_write_cache_pages.constprop.33+0x28b/0x36c [btrfs]
[  847.648601]  ? arch_local_irq_save+0x9/0xc
[  847.648601]  ? mark_lock+0x24/0x201
[  847.648601]  extent_writepages+0x4b/0x5c [btrfs]
[  847.648601]  ? btrfs_writepage_start_hook+0xed/0xed [btrfs]
[  847.648601]  btrfs_writepages+0x28/0x2a [btrfs]
[  847.648601]  do_writepages+0x23/0x2c
[  847.648601]  __filemap_fdatawrite_range+0x5a/0x61
[  847.648601]  filemap_fdatawrite_range+0x13/0x15
[  847.648601]  btrfs_fdatawrite_range+0x20/0x46 [btrfs]
[  847.648601]  start_ordered_ops+0x19/0x23 [btrfs]
[  847.648601]  btrfs_sync_file+0x136/0x42c [btrfs]
[  847.648601]  vfs_fsync_range+0x8c/0x9e
[  847.648601]  vfs_fsync+0x1c/0x1e
[  847.648601]  do_fsync+0x31/0x4a
[  847.648601]  SyS_fsync+0x10/0x14
[  847.648601]  entry_SYSCALL_64_fastpath+0x18/0xad
[  847.648601] RIP: 0033:0x7f5b05200800
[  847.648601] RSP: 002b:00007ffe204f71c8 EFLAGS: 00000246 ORIG_RAX: 000000000000004a
[  847.648601] RAX: ffffffffffffffda RBX: ffffffff8109637b RCX: 00007f5b05200800
[  847.648601] RDX: 00000000008bd0a0 RSI: 00000000008bd2e0 RDI: 0000000000000003
[  847.648601] RBP: ffffc90001d67f98 R08: 000000000000ffff R09: 000000000000001f
[  847.648601] R10: 00000000000001f6 R11: 0000000000000246 R12: 0000000000000046
[  847.648601] R13: ffffc90001d67f78 R14: 00007f5b054be740 R15: 00007f5b054be740
[  847.648601]  ? trace_hardirqs_off_caller+0x3f/0xaa
[  847.685787] ---[ end trace 2a4a3e15382508e8 ]---

So fix this by not attempting to decrement the data space info's
bytes_may_use counter if we already reserved the extent and an error
happened before creating the ordered extent. We are already correctly
freeing the reserved extent if an error happens, so there's no additional
measure needed.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
4 years agobtrfs: Handle delalloc error correctly to avoid ordered extent hang
Qu Wenruo [Wed, 8 Mar 2017 02:25:52 +0000 (10:25 +0800)]
btrfs: Handle delalloc error correctly to avoid ordered extent hang

[BUG]
If run_delalloc_range() returns error and there is already some ordered
extents created, btrfs will be hanged with the following backtrace:

Call Trace:
 __schedule+0x2d4/0xae0
 schedule+0x3d/0x90
 btrfs_start_ordered_extent+0x160/0x200 [btrfs]
 ? wake_atomic_t_function+0x60/0x60
 btrfs_run_ordered_extent_work+0x25/0x40 [btrfs]
 btrfs_scrubparity_helper+0x1c1/0x620 [btrfs]
 btrfs_flush_delalloc_helper+0xe/0x10 [btrfs]
 process_one_work+0x2af/0x720
 ? process_one_work+0x22b/0x720
 worker_thread+0x4b/0x4f0
 kthread+0x10f/0x150
 ? process_one_work+0x720/0x720
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x2e/0x40

[CAUSE]

|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<>|                       |<---------- cleanup range --------->|
 ||
 \_=> First page handled by end_extent_writepage() in __extent_writepage()

The problem is caused by error handler of run_delalloc_range(), which
doesn't handle any created ordered extents, leaving them waiting on
btrfs_finish_ordered_io() to finish.

However after run_delalloc_range() returns error, __extent_writepage()
won't submit bio, so btrfs_writepage_end_io_hook() won't be triggered
except the first page, and btrfs_finish_ordered_io() won't be triggered
for created ordered extents either.

So OE 2~n will hang forever, and if OE 1 is larger than one page, it
will also hang.

[FIX]
Introduce btrfs_cleanup_ordered_extents() function to cleanup created
ordered extents and finish them manually.

The function is based on existing
btrfs_endio_direct_write_update_ordered() function, and modify it to
act just like btrfs_writepage_endio_hook() but handles specified range
other than one page.

After fix, delalloc error will be handled like:

|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<>|<--------  ----------->|<------ old error handler --------->|
 ||          ||
 ||          \_=> Cleaned up by cleanup_ordered_extents()
 \_=> First page handled by end_extent_writepage() in __extent_writepage()

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
4 years agobtrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error
Qu Wenruo [Wed, 8 Mar 2017 02:25:51 +0000 (10:25 +0800)]
btrfs: Fix metadata underflow caused by btrfs_reloc_clone_csum error

[BUG]
When btrfs_reloc_clone_csum() reports error, it can underflow metadata
and leads to kernel assertion on outstanding extents in
run_delalloc_nocow() and cow_file_range().

 BTRFS info (device vdb5): relocating block group 12582912 flags data
 BTRFS info (device vdb5): found 1 extents
 assertion failed: inode->outstanding_extents >= num_extents, file: fs/btrfs//extent-tree.c, line: 5858

Currently, due to another bug blocking ordered extents, the bug is only
reproducible under certain block group layout and using error injection.

a) Create one data block group with one 4K extent in it.
   To avoid the bug that hangs btrfs due to ordered extent which never
   finishes
b) Make btrfs_reloc_clone_csum() always fail
c) Relocate that block group

[CAUSE]
run_delalloc_nocow() and cow_file_range() handles error from
btrfs_reloc_clone_csum() wrongly:

(The ascii chart shows a more generic case of this bug other than the
bug mentioned above)

|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
                    |<----------- cleanup range --------------->|
|<-----------  ----------->|
             \/
 btrfs_finish_ordered_io() range

So error handler, which calls extent_clear_unlock_delalloc() with
EXTENT_DELALLOC and EXTENT_DO_ACCOUNT bits, and btrfs_finish_ordered_io()
will both cover OE n, and free its metadata, causing metadata under flow.

[Fix]
The fix is to ensure after calling btrfs_add_ordered_extent(), we only
call error handler after increasing the iteration offset, so that
cleanup range won't cover any created ordered extent.

|<------------------ delalloc range --------------------------->|
| OE 1 | OE 2 | ... | OE n |
|<-----------  ----------->|<---------- cleanup range --------->|
             \/
 btrfs_finish_ordered_io() range

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
4 years agobtrfs: check if the device is flush capable
Anand Jain [Thu, 6 Apr 2017 03:22:53 +0000 (11:22 +0800)]
btrfs: check if the device is flush capable

The block layer call chain from submit_bio will check if the write cache
is enabled for the given queue before submitting the flush. This will
add a code to fail fast if its not.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ updated changelog to reflect current code stat, blkdev_issue_flush is
  not used yet ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: delete unused member nobarriers
Anand Jain [Thu, 6 Apr 2017 03:22:52 +0000 (11:22 +0800)]
btrfs: delete unused member nobarriers

The last consumer of nobarriers is removed by the commit [1] and sync
won't fail with EOPNOTSUPP anymore. Thus, now when write cache is write
through it just return success without actually transpiring such a
request to the block device/lun.

[1]
commit b25de9d6da49b1a8760a89672283128aa8c78345
block: remove BIO_EOPNOTSUPP

And, as the device/lun write cache state may change dynamically saving
such as state won't help either. So deleting the member nobarriers.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: scrub: Fix RAID56 recovery race condition
Qu Wenruo [Fri, 14 Apr 2017 00:35:55 +0000 (08:35 +0800)]
btrfs: scrub: Fix RAID56 recovery race condition

When scrubbing a RAID5 which has recoverable data corruption (only one
data stripe is corrupted), sometimes scrub will report more csum errors
than expected. Sometimes even unrecoverable error will be reported.

The problem can be easily reproduced by the following steps:
1) Create a btrfs with RAID5 data profile with 3 devs
2) Mount it with nospace_cache or space_cache=v2
   To avoid extra data space usage.
3) Create a 128K file and sync the fs, unmount it
   Now the 128K file lies at the beginning of the data chunk
4) Locate the physical bytenr of data chunk on dev3
   Dev3 is the 1st data stripe.
5) Corrupt the first 64K of the data chunk stripe on dev3
6) Mount the fs and scrub it

The correct csum error number should be 16 (assuming using x86_64).
Larger csum error number can be reported in a 1/3 chance.
And unrecoverable error can also be reported in a 1/10 chance.

The root cause of the problem is RAID5/6 recover code has race
condition, due to the fact that full scrub is initiated per device.

While for other mirror based profiles, each mirror is independent with
each other, so race won't cause any big problem.

For example:
        Corrupted       |       Correct          |      Correct        |
|   Scrub dev3 (D1)     |    Scrub dev2 (D2)     |    Scrub dev1(P)    |
------------------------------------------------------------------------
Read out D1             |Read out D2             |Read full stripe     |
Check csum              |Check csum              |Check parity         |
Csum mismatch           |Csum match, continue    |Parity mismatch      |
handle_errored_block    |                        |handle_errored_block |
 Read out full stripe   |                        | Read out full stripe|
 D1 csum error(err++)   |                        | D1 csum error(err++)|
 Recover D1             |                        | Recover D1          |

So D1's csum error is accounted twice, just because
handle_errored_block() doesn't have enough protection, and race can happen.

On even worse case, for example D1's recovery code is re-writing
D1/D2/P, and P's recovery code is just reading out full stripe, then we
can cause unrecoverable error.

This patch will use previously introduced lock_full_stripe() and
unlock_full_stripe() to protect the whole scrub_handle_errored_block()
function for RAID56 recovery.
So no extra csum error nor unrecoverable error.

Reported-by: Goffredo Baroncelli <kreijack@libero.it>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: scrub: Introduce full stripe lock for RAID56
Qu Wenruo [Fri, 14 Apr 2017 00:35:54 +0000 (08:35 +0800)]
btrfs: scrub: Introduce full stripe lock for RAID56

Unlike mirror based profiles, RAID5/6 recovery needs to read out the
whole full stripe.

And if we don't do proper protection, it can easily cause race condition.

Introduce 2 new functions: lock_full_stripe() and unlock_full_stripe()
for RAID5/6.
Which store a rb_tree of mutexes for full stripes, so scrub callers can
use them to lock a full stripe to avoid race.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ minor comment adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Use ktime_get_real_ts for root ctime
Deepa Dinamani [Sat, 8 Apr 2017 00:57:05 +0000 (17:57 -0700)]
btrfs: Use ktime_get_real_ts for root ctime

btrfs_root_item maintains the ctime for root updates.  This is not part
of vfs_inode.

Since current_time() uses struct inode* as an argument as Linus
suggested, this cannot be used to update root times unless, we modify
the signature to use inode.

Since btrfs uses nanosecond time granularity, it can also use
ktime_get_real_ts directly to obtain timestamp for the root. It is
necessary to use the timespec time api here because the same
btrfs_set_stack_timespec_*() apis are used for vfs inode times as well.
These can be transitioned to using timespec64 when btrfs internally
changes to use timespec64 as well.

Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: handle only applicable errors returned by btrfs_get_extent
Dan Carpenter [Tue, 11 Apr 2017 08:57:15 +0000 (11:57 +0300)]
Btrfs: handle only applicable errors returned by btrfs_get_extent

btrfs_get_extent() never returns NULL pointers, so this code introduces
a static checker warning.

The btrfs_get_extent() is a bit complex, but trust me that it doesn't
return NULLs and also if it did we would trigger the BUG_ON(!em) before
the last return statement.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
[ updated subject ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option
Qu Wenruo [Mon, 27 Feb 2017 07:10:33 +0000 (15:10 +0800)]
btrfs: qgroup: Fix qgroup corruption caused by inode_cache mount option

[BUG]
The easist way to reproduce the bug is:
------
 # mkfs.btrfs -f $dev -n 16K
 # mount $dev $mnt -o inode_cache
 # btrfs quota enable $mnt
 # btrfs quota rescan -w $mnt
 # btrfs qgroup show $mnt
qgroupid         rfer         excl
--------         ----         ----
0/5          32.00KiB     32.00KiB
             ^^ Twice the correct value
------

And fstests/btrfs qgroup test group can easily detect them with
inode_cache mount option.
Although some of them are false alerts since old test cases are using
fixed golden output.
While new test cases will use "btrfs check" to detect qgroup mismatch.

[CAUSE]
Inode_cache mount option will make commit_fs_roots() to call
btrfs_save_ino_cache() to update fs/subvol trees, and generate new
delayed refs.

However we call btrfs_qgroup_prepare_account_extents() too early, before
commit_fs_roots().
This makes the "old_roots" for newly generated extents are always NULL.
For freeing extent case, this makes both new_roots and old_roots to be
empty, while correct old_roots should not be empty.
This causing qgroup numbers not decreased correctly.

[FIX]
Modify the timing of calling btrfs_qgroup_prepare_account_extents() to
just before btrfs_qgroup_account_extents(), and add needed delayed_refs
handler.
So qgroup can handle inode_map mount options correctly.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: use q which is already obtained from bdev_get_queue
Anand Jain [Tue, 4 Apr 2017 10:40:19 +0000 (18:40 +0800)]
btrfs: use q which is already obtained from bdev_get_queue

We have already assigned q from bdev_get_queue() so use it.
And rearrange the code for better view.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: switch to div64_u64 if with a u64 divisor
Liu Bo [Mon, 3 Apr 2017 20:45:24 +0000 (13:45 -0700)]
Btrfs: switch to div64_u64 if with a u64 divisor

This is fixing code pieces where we use div_u64 when passing a u64 divisor.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: update scrub_parity to use u64 stripe_len
Liu Bo [Mon, 3 Apr 2017 20:45:33 +0000 (13:45 -0700)]
Btrfs: update scrub_parity to use u64 stripe_len

Commit 3d8da6781760 ("Btrfs: fix divide error upon chunk's stripe_len")
changed stripe_len in struct map_lookup to u64, but didn't update
stripe_len in struct scrub_parity.

This updates the type and switches to div64_u64_rem to match u64 divisor.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: enable repair during read for raid56 profile
Liu Bo [Wed, 29 Mar 2017 17:53:58 +0000 (10:53 -0700)]
Btrfs: enable repair during read for raid56 profile

Now that scrub can fix data errors with the help of parity for raid56
profile, repair during read is able to as well.

Although the mirror num in raid56 scenario has different meanings, i.e.
0 or 1: read data directly
> 1:    do recover with parity,
it could be fit into how we repair bad block during read.

The trick is to use BTRFS_MAP_READ instead of BTRFS_MAP_WRITE to get the
device and position on it.

Cc: David Sterba <dsterba@suse.cz>
Tested-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: use clear_page where appropriate
David Sterba [Wed, 29 Mar 2017 18:48:44 +0000 (20:48 +0200)]
btrfs: use clear_page where appropriate

There's a helper to clear whole page, with a arch-specific optimized
code. The replaced cases do not seem to be in performace critical code,
but we still might get some percent gain.

Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Prevent scrub recheck from racing with dev replace
Qu Wenruo [Wed, 29 Mar 2017 01:33:22 +0000 (09:33 +0800)]
btrfs: Prevent scrub recheck from racing with dev replace

scrub_setup_recheck_block() calls btrfs_map_sblock() and then accesses
bbio without protection of bio_counter.

This can lead to use-after-free if racing with dev replace cancel.

Fix it by increasing bio_counter before calling btrfs_map_sblock() and
decreasing the bio_counter when corresponding recover is finished.

Cc: Liu Bo <bo.li.liu@oracle.com>
Reported-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: Wait for in-flight bios before freeing target device for raid56
Qu Wenruo [Wed, 29 Mar 2017 01:33:21 +0000 (09:33 +0800)]
btrfs: Wait for in-flight bios before freeing target device for raid56

When raid56 dev-replace is cancelled by running scrub, we will free
target device without waiting for in-flight bios, causing the following
NULL pointer deference or general protection failure.

 BUG: unable to handle kernel NULL pointer dereference at 00000000000005e0
 IP: generic_make_request_checks+0x4d/0x610
 CPU: 1 PID: 11676 Comm: kworker/u4:14 Tainted: G  O    4.11.0-rc2 #72
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-20170228_101828-anatol 04/01/2014
 Workqueue: btrfs-endio-raid56 btrfs_endio_raid56_helper [btrfs]
 task: ffff88002875b4c0 task.stack: ffffc90001334000
 RIP: 0010:generic_make_request_checks+0x4d/0x610
 Call Trace:
  ? generic_make_request+0xc7/0x360
  generic_make_request+0x24/0x360
  ? generic_make_request+0xc7/0x360
  submit_bio+0x64/0x120
  ? page_in_rbio+0x4d/0x80 [btrfs]
  ? rbio_orig_end_io+0x80/0x80 [btrfs]
  finish_rmw+0x3f4/0x540 [btrfs]
  validate_rbio_for_rmw+0x36/0x40 [btrfs]
  raid_rmw_end_io+0x7a/0x90 [btrfs]
  bio_endio+0x56/0x60
  end_workqueue_fn+0x3c/0x40 [btrfs]
  btrfs_scrubparity_helper+0xef/0x620 [btrfs]
  btrfs_endio_raid56_helper+0xe/0x10 [btrfs]
  process_one_work+0x2af/0x720
  ? process_one_work+0x22b/0x720
  worker_thread+0x4b/0x4f0
  kthread+0x10f/0x150
  ? process_one_work+0x720/0x720
  ? kthread_create_on_node+0x40/0x40
  ret_from_fork+0x2e/0x40
 RIP: generic_make_request_checks+0x4d/0x610 RSP: ffffc90001337bb8

In btrfs_dev_replace_finishing(), we will call
btrfs_rm_dev_replace_blocked() to wait bios before destroying the target
device when scrub is finished normally.

However when dev-replace is aborted, either due to error or cancelled by
scrub, we didn't wait for bios, this can lead to use-after-free if there
are bios holding the target device.

Furthermore, for raid56 scrub, at least 2 places are calling
btrfs_map_sblock() without protection of bio_counter, leading to the
problem.

This patch fixes the problem:
1) Wait for bio_counter before freeing target device when canceling
   replace
2) When calling btrfs_map_sblock() for raid56, use bio_counter to
   protect the call.

Cc: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: scrub: Don't append on-disk pages for raid56 scrub
Qu Wenruo [Wed, 29 Mar 2017 01:33:20 +0000 (09:33 +0800)]
btrfs: scrub: Don't append on-disk pages for raid56 scrub

In the following situation, scrub will calculate wrong parity to
overwrite the correct one:

RAID5 full stripe:

Before
|     Dev 1      |     Dev  2     |     Dev 3     |
| Data stripe 1  | Data stripe 2  | Parity Stripe |
--------------------------------------------------- 0
| 0x0000 (Bad)   |     0xcdcd     |     0x0000    |
--------------------------------------------------- 4K
|     0xcdcd     |     0xcdcd     |     0x0000    |
...
|     0xcdcd     |     0xcdcd     |     0x0000    |
--------------------------------------------------- 64K

After scrubbing dev3 only:

|     Dev 1      |     Dev  2     |     Dev 3     |
| Data stripe 1  | Data stripe 2  | Parity Stripe |
--------------------------------------------------- 0
| 0xcdcd (Good)  |     0xcdcd     | 0xcdcd (Bad)  |
--------------------------------------------------- 4K
|     0xcdcd     |     0xcdcd     |     0x0000    |
...
|     0xcdcd     |     0xcdcd     |     0x0000    |
--------------------------------------------------- 64K

The reason is that after raid56 read rebuild rbio->stripe_pages are all
correctly recovered (0xcd for data stripes).

However when we check and repair parity in
scrub_parity_check_and_repair(), we will append pages in sparity->spages
list to rbio->bio_pages[], which contains old on-disk data.

And when we submit parity data to disk, we calculate parity using
rbio->bio_pages[] first, if rbio->bio_pages[] not found, then fallback
to rbio->stripe_pages[].

The patch fix it by not appending pages from sparity->spages.
So finish_parity_scrub() will use rbio->stripe_pages[] which is correct.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: qgroup: Re-arrange tracepoint timing to co-operate with reserved space tracepoint
Qu Wenruo [Mon, 13 Mar 2017 07:52:09 +0000 (15:52 +0800)]
btrfs: qgroup: Re-arrange tracepoint timing to co-operate with reserved space tracepoint

Newly introduced qgroup reserved space trace points are normally nested
into several common qgroup operations.

While some other trace points are not well placed to co-operate with
them, causing confusing output.

This patch re-arrange trace_btrfs_qgroup_release_data() and
trace_btrfs_qgroup_free_delayed_ref() trace points so they are triggered
before reserved space ones.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: qgroup: Add trace point for qgroup reserved space
Qu Wenruo [Mon, 13 Mar 2017 07:52:08 +0000 (15:52 +0800)]
btrfs: qgroup: Add trace point for qgroup reserved space

Introduce the following trace points:
qgroup_update_reserve
qgroup_meta_reserve

These trace points are handy to trace qgroup reserve space related
problems.

Also export btrfs_qgroup structure, as now we directly pass btrfs_qgroup
structure to trace points, so that structure needs to be exported.

Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: drop redundant parameters from btrfs_map_sblock
David Sterba [Tue, 28 Mar 2017 12:45:22 +0000 (14:45 +0200)]
btrfs: drop redundant parameters from btrfs_map_sblock

All callers pass 0 for mirror_num and 1 for need_raid_map.

Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: sink GFP flags parameter to tree_mod_log_insert_root
David Sterba [Tue, 28 Mar 2017 12:35:42 +0000 (14:35 +0200)]
btrfs: sink GFP flags parameter to tree_mod_log_insert_root

All (1) callers pass the same value.

Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: sink GFP flags parameter to tree_mod_log_insert_move
David Sterba [Tue, 28 Mar 2017 12:35:01 +0000 (14:35 +0200)]
btrfs: sink GFP flags parameter to tree_mod_log_insert_move

All (1) callers pass the same value.

Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: fix wrong failed mirror_num of read-repair on raid56
Liu Bo [Wed, 29 Mar 2017 17:54:26 +0000 (10:54 -0700)]
Btrfs: fix wrong failed mirror_num of read-repair on raid56

In raid56 scenario, after trying parity recovery, we didn't set
mirror_num for btrfs_bio with failed mirror_num, hence
end_bio_extent_readpage() will report a random mirror_num in dmesg
log.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: set scrub page's io_error if failing to submit io
Liu Bo [Wed, 29 Mar 2017 17:55:16 +0000 (10:55 -0700)]
Btrfs: set scrub page's io_error if failing to submit io

Scrub repairs data by the unit called scrub_block, which may contain
several pages.  Scrub always tries to look up a good copy of a whole
block, but if there's no such copy, it tries to do repair page by page.

If we don't set page's io_error when checking this bad copy, in the last
step, we may skip this page when repairing bad copy from good copy.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: track exclusive filesystem operation in flags
David Sterba [Tue, 28 Mar 2017 12:44:21 +0000 (14:44 +0200)]
btrfs: track exclusive filesystem operation in flags

There are several operations, usually started from ioctls, that cannot
run concurrently. The status is tracked in
mutually_exclusive_operation_running as an atomic_t. We can easily track
the status as one of the per-filesystem flag bits with same
synchronization guarantees.

The conversion replaces:

* atomic_xchg(..., 1)    ->   test_and_set_bit(FLAG, ...)
* atomic_set(..., 0)     ->   clear_bit(FLAG, ...)

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: qgroups: Retry after commit on getting EDQUOT
Goldwyn Rodrigues [Mon, 27 Mar 2017 17:29:57 +0000 (12:29 -0500)]
btrfs: qgroups: Retry after commit on getting EDQUOT

We are facing the same problem with EDQUOT which was experienced with
ENOSPC. Not sure if we require a full ticketing system such as ENOSPC, but
here is a quick fix, which may be too big a hammer.

Quotas are reserved during the start of an operation, incrementing
qg->reserved. However, it is written to disk in a commit_transaction
which could take as long as commit_interval. In the meantime there
could be deletions which are not accounted for because deletions are
accounted for only while committed (free_refroot). So, when we get
a EDQUOT flush the data to disk and try again.

This fixes fstests btrfs/139.

Here is a sample script which shows this issue.

DEVICE=/dev/vdb
MOUNTPOINT=/mnt
TESTVOL=$MOUNTPOINT/tmp
QUOTA=5
PROG=btrfs
DD_BS="4k"
DD_COUNT="256"
RUN_TIMES=5000

mkfs.btrfs -f $DEVICE
mount -o commit=240 $DEVICE $MOUNTPOINT
$PROG subvolume create $TESTVOL
$PROG quota enable $TESTVOL
$PROG qgroup limit ${QUOTA}G $TESTVOL

typeset -i DD_RUN_GOOD
typeset -i QUOTA

function _check_cmd() {
        if [[ ${?} > 0 ]]; then
                echo -n "$(date) E: Running previous command"
                echo ${*}
                echo "Without sync"
                $PROG qgroup show -pcreFf ${TESTVOL}
                echo "With sync"
                $PROG qgroup show -pcreFf --sync ${TESTVOL}
                exit 1
        fi
}

while true; do
  DD_RUN_GOOD=$RUN_TIMES

  while (( ${DD_RUN_GOOD} != 0 )); do
        dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}
        _check_cmd "dd if=/dev/zero of=${TESTVOL}/quotatest${DD_RUN_GOOD} bs=${DD_BS} count=${DD_COUNT}"
        DD_RUN_GOOD=(${DD_RUN_GOOD}-1)
  done

  $PROG qgroup show -pcref $TESTVOL
  echo "----------- Cleanup ---------- "
  rm $TESTVOL/quotatest*

done

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: replace hardcoded value with SEQ_LAST macro
Edmund Nadolski [Thu, 16 Mar 2017 16:04:34 +0000 (10:04 -0600)]
btrfs: replace hardcoded value with SEQ_LAST macro

Define the SEQ_LAST macro to replace (u64)-1 in places where said
value triggers a special-case ref search behavior.

Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: provide enumeration for __merge_refs mode argument
Edmund Nadolski [Thu, 16 Mar 2017 16:04:33 +0000 (10:04 -0600)]
btrfs: provide enumeration for __merge_refs mode argument

Replace hardcoded numeric values for __merge_refs 'mode' argument
with descriptive constants.

Signed-off-by: Edmund Nadolski <enadolski@suse.com>
Reviewed-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: remove unused qgroup members from btrfs_trans_handle
David Sterba [Wed, 15 Mar 2017 15:17:03 +0000 (16:17 +0100)]
btrfs: remove unused qgroup members from btrfs_trans_handle

The members have been effectively unused since "Btrfs: rework qgroup
accounting" (fcebe4562dec83b3), there's no substitute for
assert_qgroups_uptodate so it's removed as well.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: remove local blocksize variable in reada_find_extent
David Sterba [Wed, 15 Mar 2017 15:39:59 +0000 (16:39 +0100)]
btrfs: remove local blocksize variable in reada_find_extent

The name is misleading and the local variable serves no purpose.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: remove redundant parameter from reada_start_machine_dev
David Sterba [Thu, 2 Mar 2017 18:43:30 +0000 (19:43 +0100)]
btrfs: remove redundant parameter from reada_start_machine_dev

We can read fs_info from dev.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: remove redundant parameter from reada_find_zone
David Sterba [Thu, 2 Mar 2017 18:43:30 +0000 (19:43 +0100)]
btrfs: remove redundant parameter from reada_find_zone

We can read fs_info from dev.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: remove redundant parameter from btree_readahead_hook
David Sterba [Thu, 2 Mar 2017 18:43:30 +0000 (19:43 +0100)]
btrfs: remove redundant parameter from btree_readahead_hook

We can read fs_info from eb.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: preallocate radix tree node for global readahead tree
David Sterba [Thu, 2 Mar 2017 17:54:52 +0000 (18:54 +0100)]
btrfs: preallocate radix tree node for global readahead tree

We can preallocate the node so insertion does not have to do that under
the lock. The GFP flags for the global radix tree are initialized to
 GFP_NOFS & ~__GFP_DIRECT_RECLAIM
but we can use GFP_KERNEL, because readahead is optional and not on any
critical writeout path.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: preallocate radix tree node for readahead
David Sterba [Thu, 2 Mar 2017 17:54:52 +0000 (18:54 +0100)]
btrfs: preallocate radix tree node for readahead

We can preallocate the node so insertion does not have to do that under
the lock. The GFP flags for the per-device radix tree are initialized to
 GFP_NOFS & ~__GFP_DIRECT_RECLAIM
but we can use GFP_KERNEL, same as an allocation above anyway, but also
because readahead is optional and not on any critical writeout path.

Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: consistent usage of types in balance_args
Hans van Kranenburg [Wed, 8 Mar 2017 17:58:43 +0000 (18:58 +0100)]
Btrfs: consistent usage of types in balance_args

The btrfs_balance_args are only used for the balance ioctl, so use __u
instead of __le here for consistency. The __le usage was introduced in
bc3094673f22d and dee32d0ac3719 and was probably a result of
copy/pasting when the code was written.

The usage of __le did not break anything, but it's unnecessary. Also,
this change makes the code less confusing for the careful reader.

Signed-off-by: Hans van Kranenburg <hans.van.kranenburg@mendix.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: No need to check !(flags & MS_RDONLY) twice
Goldwyn Rodrigues [Sat, 4 Mar 2017 18:32:50 +0000 (12:32 -0600)]
btrfs: No need to check !(flags & MS_RDONLY) twice

Code cleanup.
The code block is for !(*flags & MS_RDONLY). We don't need
to check it again.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: update comments in cache_save_setup
Liu Bo [Mon, 6 Mar 2017 21:49:02 +0000 (13:49 -0800)]
Btrfs: update comments in cache_save_setup

We also don't bother to flush free space cache while with free space
tree.

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: convert BUG_ON to WARN_ON
Liu Bo [Tue, 14 Mar 2017 20:34:01 +0000 (13:34 -0700)]
Btrfs: convert BUG_ON to WARN_ON

These two BUG_ON()s would never be true, ensured by callers' logic.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: helper for ops that requires full stripe
Liu Bo [Tue, 14 Mar 2017 20:34:00 +0000 (13:34 -0700)]
Btrfs: helper for ops that requires full stripe

This adds a helper to show directly whether ops require full stripe.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: do not add extra mirror when dev_replace target dev is not available
Liu Bo [Tue, 14 Mar 2017 20:33:59 +0000 (13:33 -0700)]
Btrfs: do not add extra mirror when dev_replace target dev is not available

With this, we can avoid allocating memory for dev replace copies if the
target dev is not available.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: handle operations for device replace separately
Liu Bo [Tue, 14 Mar 2017 20:33:58 +0000 (13:33 -0700)]
Btrfs: handle operations for device replace separately

Since this part is mostly independent, this moves it to a separate
function.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: introduce a function to get extra mirror from replace
Liu Bo [Tue, 14 Mar 2017 20:33:57 +0000 (13:33 -0700)]
Btrfs: introduce a function to get extra mirror from replace

As the part of getting extra mirror in __btrfs_map_block is
independent, this puts it into a separate function.

Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: separate DISCARD from __btrfs_map_block
Liu Bo [Tue, 14 Mar 2017 20:33:56 +0000 (13:33 -0700)]
Btrfs: separate DISCARD from __btrfs_map_block

Since DISCARD is not as important as an operation like write, we don't
copy it to target device during replace, and it makes __btrfs_map_block
less complex.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: create a helper for getting chunk map
Liu Bo [Tue, 14 Mar 2017 20:33:55 +0000 (13:33 -0700)]
Btrfs: create a helper for getting chunk map

We have similar code here and there, this merges them into a helper.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: add file item tracepoints
Liu Bo [Fri, 10 Mar 2017 19:09:48 +0000 (11:09 -0800)]
Btrfs: add file item tracepoints

While debugging truncate problems, I found that these tracepoints could
help us quickly know what went wrong.

Two sets of tracepoints are created to track regular/prealloc file item
and inline file item respectively, I put inline as a separate one since
what inline file items cares about are way less than the regular one.

This adds four tracepoints:
- btrfs_get_extent_show_fi_regular
- btrfs_get_extent_show_fi_inline
- btrfs_truncate_show_fi_regular
- btrfs_truncate_show_fi_inline

Cc: David Sterba <dsterba@suse.cz>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ formatting adjustments ]
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert btrfs_raid_bio.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:26 +0000 (10:55 +0200)]
btrfs: convert btrfs_raid_bio.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert scrub_ctx.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:25 +0000 (10:55 +0200)]
btrfs: convert scrub_ctx.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert scrub_parity.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:24 +0000 (10:55 +0200)]
btrfs: convert scrub_parity.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert scrub_block.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:23 +0000 (10:55 +0200)]
btrfs: convert scrub_block.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert scrub_recover.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:21 +0000 (10:55 +0200)]
btrfs: convert scrub_recover.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert compressed_bio.pending_bios from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:20 +0000 (10:55 +0200)]
btrfs: convert compressed_bio.pending_bios from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert extent_state.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:19 +0000 (10:55 +0200)]
btrfs: convert extent_state.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert btrfs_root.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:18 +0000 (10:55 +0200)]
btrfs: convert btrfs_root.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert btrfs_delayed_item.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:17 +0000 (10:55 +0200)]
btrfs: convert btrfs_delayed_item.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert btrfs_delayed_node.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:16 +0000 (10:55 +0200)]
btrfs: convert btrfs_delayed_node.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert btrfs_delayed_ref_node.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:15 +0000 (10:55 +0200)]
btrfs: convert btrfs_delayed_ref_node.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert btrfs_caching_control.count from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:14 +0000 (10:55 +0200)]
btrfs: convert btrfs_caching_control.count from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert btrfs_ordered_extent.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:13 +0000 (10:55 +0200)]
btrfs: convert btrfs_ordered_extent.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert extent_map.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:12 +0000 (10:55 +0200)]
btrfs: convert extent_map.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert btrfs_transaction.use_count from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:11 +0000 (10:55 +0200)]
btrfs: convert btrfs_transaction.use_count from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: convert btrfs_bio.refs from atomic_t to refcount_t
Elena Reshetova [Fri, 3 Mar 2017 08:55:10 +0000 (10:55 +0200)]
btrfs: convert btrfs_bio.refs from atomic_t to refcount_t

refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoBtrfs: remove ASSERT in btrfs_truncate_inode_items
Liu Bo [Fri, 3 Mar 2017 02:41:19 +0000 (18:41 -0800)]
Btrfs: remove ASSERT in btrfs_truncate_inode_items

After 76b42abbf748 ("Btrfs: fix data loss after truncate when using the
no-holes feature"),

For either NO_HOLES or inline extents, we've set last_size to newsize to
avoid data loss after remount or inode got evicted and read again, thus,
we don't need this check anymore.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agobtrfs: fix a bogus warning when converting only data or metadata
Adam Borowski [Tue, 7 Mar 2017 22:34:44 +0000 (23:34 +0100)]
btrfs: fix a bogus warning when converting only data or metadata

If your filesystem has, eg, data:raid0 metadata:raid1, and you run "btrfs
balance -dconvert=raid1", the meta.target field will be uninitialized.
That's otherwise ok, as it's unused except for this warning.

Thus, let's use the existing set of raid levels for the comparison.

As a side effect, non-convert balances will now nag about data>metadata.

Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoMAINTAINERS: add btrfs file entries for include directories
Dmitry V. Levin [Thu, 2 Mar 2017 19:42:38 +0000 (22:42 +0300)]
MAINTAINERS: add btrfs file entries for include directories

Add file entries for btrfs header files.

Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
4 years agoLinux 4.11-rc7 v4.11-rc7
Linus Torvalds [Sun, 16 Apr 2017 20:00:18 +0000 (13:00 -0700)]
Linux 4.11-rc7

4 years agoMerge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Sun, 16 Apr 2017 19:38:17 +0000 (12:38 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "Again, a batch that's been sitting a couple of weeks, mostly because
  I anticipated a bit more material but it didn't show up -- which is
  good.

  These are all your garden variety fixes for ARM platforms.

  The most visible issue fixed here is probably the SMP reset issue on
  OMAP, the rest are minor stuff"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: allwinner: a64: add pmu0 regs for USB PHY
  ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer
  reset: add exported __reset_control_get, return NULL if optional
  ARM: orion5x: only call into phylib when available
  ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
  ARM: dts: ti: fix PCI bus dtc warnings
  ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY
  ARM: dts: OMAP3: Fix MFG ID EEPROM
  ARM: sun8i: a33: add operating-points-v2 property to all nodes
  ARM: sun8i: a33: remove highest OPP to fix CPU crashes

4 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Sun, 16 Apr 2017 19:05:09 +0000 (12:05 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Four small fixes.

  Three of them fix the same error in NVMe, in loop, fc, and rdma
  respectively.  The last fix from Ming fixes a regression in this
  series, where our bvec gap logic was wrong and causes an oops on
  NVMe for certain conditions"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix bio_will_gap() for first bvec with offset
  nvme-fc: Fix sqsize wrong assignment based on ctrl MQES capability
  nvme-rdma: Fix sqsize wrong assignment based on ctrl MQES capability
  nvme-loop: Fix sqsize wrong assignment based on ctrl MQES capability

4 years agoMerge tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux...
Olof Johansson [Sun, 16 Apr 2017 18:52:26 +0000 (11:52 -0700)]
Merge tag 'omap-for-v4.11/fixes-rc6-signed' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

Regression fix for omap interconnect code for deferred probe.
Without this fix we can get PM related warnings for devices that
use deferred probe. If necessary, this fix can wait for the
v4.12 merge window no problem.

* tag 'omap-for-v4.11/fixes-rc6-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: omap_device: Sync omap_device and pm_runtime after probe defer
  ARM: omap2+: Revert omap-smp.c changes resetting CPU1 during boot
  ARM: dts: am335x-evmsk: adjust mmc2 param to allow suspend
  ARM: dts: ti: fix PCI bus dtc warnings
  ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY
  ARM: dts: OMAP3: Fix MFG ID EEPROM

Signed-off-by: Olof Johansson <olof@lixom.net>
4 years agoMerge branch 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj...
Linus Torvalds [Sun, 16 Apr 2017 18:48:10 +0000 (11:48 -0700)]
Merge branch 'for-4.11-fixes' of git://git./linux/kernel/git/tj/cgroup

Pull cgroup fix from Tejun Heo:
 "Unfortunately, the commit to fix the cgroup mount race in the previous
  pull request can lead to hangs.

  The original bug has been around for a while and isn't too likely to
  be triggered in usual use cases. Revert the commit for now"

* 'for-4.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  Revert "cgroup: avoid attaching a cgroup root to two different superblocks"

4 years agoMerge tag 'tty-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Sun, 16 Apr 2017 18:35:34 +0000 (11:35 -0700)]
Merge tag 'tty-4.11-rc7' of git://git./linux/kernel/git/gregkh/tty

Pull tty fix from Greg KH:
 "Here is a single tty core revert for a patch that was reported to
  cause problems.

  The original issue is one that we have lived with for decades, so
  trying to scramble to fix the fix in time for 4.11-final does not make
  sense due to the fragility of the tty ldisc layer. Just reverting it
  makes sense for now"

* tag 'tty-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "tty: don't panic on OOM in tty_set_ldisc()"

4 years agoMerge tag 'trace-v4.11-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rosted...
Linus Torvalds [Sun, 16 Apr 2017 17:01:34 +0000 (10:01 -0700)]
Merge tag 'trace-v4.11-rc5-2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull ftrace fix from Steven Rostedt:
 "While rewriting the function probe code, I stumbled over a long
  standing bug. This bug has been there sinc function tracing was added
  way back when. But my new development depends on this bug being fixed,
  and it should be fixed regardless as it causes ftrace to disable
  itself when triggered, and a reboot is required to enable it again.

  The bug is that the function probe does not disable itself properly if
  there's another probe of its type still enabled. For example:

     # cd /sys/kernel/debug/tracing
     # echo schedule:traceoff > set_ftrace_filter
     # echo do_IRQ:traceoff > set_ftrace_filter
     # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter
     # echo do_IRQ:traceoff > set_ftrace_filter

  The above registers two traceoff probes (one for schedule and one for
  do_IRQ, and then removes do_IRQ.

  But since there still exists one for schedule, it is not done
  properly. When adding do_IRQ back, the breakage in the accounting is
  noticed by the ftrace self tests, and it causes a warning and disables
  ftrace"

* tag 'trace-v4.11-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Fix removing of second function probe

4 years agoRevert "cgroup: avoid attaching a cgroup root to two different superblocks"
Tejun Heo [Sun, 16 Apr 2017 14:17:37 +0000 (23:17 +0900)]
Revert "cgroup: avoid attaching a cgroup root to two different superblocks"

This reverts commit bfb0b80db5f9dca5ac0a5fd0edb765ee555e5a8e.

Andrei reports CRIU test hangs with the patch applied.  The bug fixed
by the patch isn't too likely to trigger in actual uses.  Revert the
patch for now.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Link: http://lkml.kernel.org/r/20170414232737.GC20350@outlook.office365.com
4 years agoMerge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdim...
Linus Torvalds [Sat, 15 Apr 2017 21:07:03 +0000 (14:07 -0700)]
Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull nvdimm fixes from Dan Williams:
 "A small crop of lockdep, sleeping while atomic, and other fixes /
  band-aids in advance of the full-blown reworks targeting the next
  merge window. The largest change here is "libnvdimm: fix blk free
  space accounting" which deletes a pile of buggy code that better
  testing would have caught before merging. The next change that is
  borderline too big for a late rc is switching the device-dax locking
  from rcu to srcu, I couldn't think of a smaller way to make that fix.

  The __copy_user_nocache fix will have a full replacement in 4.12 to
  move those pmem special case considerations into the pmem driver. The
  "libnvdimm: band aid btt vs clear poison locking" commit admits that
  our error clearing support for btt went in broken, so we just disable
  it in 4.11 and -stable. A replacement / full fix is in the pipeline
  for 4.12

  Some of these would have been caught earlier had DEBUG_ATOMIC_SLEEP
  been enabled on my development station. I wonder if we should have:

      config DEBUG_ATOMIC_SLEEP
        default PROVE_LOCKING

  ...since I mistakenly thought I got both with PROVE_LOCKING=y.

  These have received a build success notification from the 0day robot,
  and some have appeared in a -next release with no reported issues"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  x86, pmem: fix broken __copy_user_nocache cache-bypass assumptions
  device-dax: switch to srcu, fix rcu_read_lock() vs pte allocation
  libnvdimm: band aid btt vs clear poison locking
  libnvdimm: fix reconfig_mutex, mmap_sem, and jbd2_handle lockdep splat
  libnvdimm: fix blk free space accounting
  acpi, nfit, libnvdimm: fix interleave set cookie calculation (64-bit comparison)

4 years agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sat, 15 Apr 2017 16:42:14 +0000 (09:42 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is seven small fixes which are all for user visible issues that
  fortunately only occur in rare circumstances.

  The most serious is the sr one in which QEMU can cause us to read
  beyond the end of a buffer (I don't think it's exploitable, but just
  in case).

  The next is the sd capacity fix which means all non 512 byte sector
  drives greater than 2TB fail to be correctly sized.

  The rest are either in new drivers (qedf) or on error legs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ipr: do not set DID_PASSTHROUGH on CHECK CONDITION
  scsi: aacraid: fix PCI error recovery path
  scsi: sd: Fix capacity calculation with 32-bit sector_t
  scsi: qla2xxx: Add fix to read correct register value for ISP82xx.
  scsi: qedf: Fix crash due to unsolicited FIP VLAN response.
  scsi: sr: Sanity check returned mode data
  scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable

4 years agoMerge branch 'parisc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller...
Linus Torvalds [Sat, 15 Apr 2017 16:40:35 +0000 (09:40 -0700)]
Merge branch 'parisc-4.11-4' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fix from Helge Deller:
 "Mikulas Patocka fixed a few bugs in our new pa_memcpy() assembler
  function, e.g. one bug made the kernel unbootable if source and
  destination address are the same"

* 'parisc-4.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: fix bugs in pa_memcpy

4 years agoorangefs: free superblock when mount fails
Martin Brandenburg [Fri, 14 Apr 2017 18:22:41 +0000 (14:22 -0400)]
orangefs: free superblock when mount fails

Otherwise lockdep says:

[ 1337.483798] ================================================
[ 1337.483999] [ BUG: lock held when returning to user space! ]
[ 1337.484252] 4.11.0-rc6 #19 Not tainted
[ 1337.484423] ------------------------------------------------
[ 1337.484626] mount/14766 is leaving the kernel with locks still held!
[ 1337.484841] 1 lock held by mount/14766:
[ 1337.485017]  #0:  (&type->s_umount_key#33/1){+.+.+.}, at: [<ffffffff8124171f>] sget_userns+0x2af/0x520

Caught by xfstests generic/413 which tried to mount with the unsupported
mount option dax.  Then xfstests generic/422 ran sync which deadlocks.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Acked-by: Mike Marshall <hubcap@omnibond.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agovfs: don't do RCU lookup of empty pathnames
Linus Torvalds [Mon, 3 Apr 2017 00:10:08 +0000 (17:10 -0700)]
vfs: don't do RCU lookup of empty pathnames

Normal pathname lookup doesn't allow empty pathnames, but using
AT_EMPTY_PATH (with name_to_handle_at() or fstatat(), for example) you
can trigger an empty pathname lookup.

And not only is the RCU lookup in that case entirely unnecessary
(because we'll obviously immediately finalize the end result), it is
actively wrong.

Why? An empth path is a special case that will return the original
'dirfd' dentry - and that dentry may not actually be RCU-free'd,
resulting in a potential use-after-free if we were to initialize the
path lazily under the RCU read lock and depend on complete_walk()
finalizing the dentry.

Found by syzkaller and KASAN.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoparisc: fix bugs in pa_memcpy
Mikulas Patocka [Fri, 14 Apr 2017 18:15:20 +0000 (14:15 -0400)]
parisc: fix bugs in pa_memcpy

The patch 554bfeceb8a22d448cd986fc9efce25e833278a1 ("parisc: Fix access
fault handling in pa_memcpy()") reimplements the pa_memcpy function.
Unfortunatelly, it makes the kernel unbootable. The crash happens in the
function ide_complete_cmd where memcpy is called with the same source
and destination address.

This patch fixes a few bugs in pa_memcpy:

* When jumping to .Lcopy_loop_16 for the first time, don't skip the
  instruction "ldi 31,t0" (this bug made the kernel unbootable)
* Use the COND macro when comparing length, so that the comparison is
  64-bit (a theoretical issue, in case the length is greater than
  0xffffffff)
* Don't use the COND macro after the "extru" instruction (the PA-RISC
  specification says that the upper 32-bits of extru result are undefined,
  although they are set to zero in practice)
* Fix exception addresses in .Lcopy16_fault and .Lcopy8_fault
* Rename .Lcopy_loop_4 to .Lcopy_loop_8 (so that it is consistent with
  .Lcopy8_fault)

Cc: <stable@vger.kernel.org> # v4.9+
Fixes: 554bfeceb8a2 ("parisc: Fix access fault handling in pa_memcpy()")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
4 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 15 Apr 2017 00:51:16 +0000 (17:51 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
 "Just a small update to xpad driver to recognize yet another gamepad,
  and another change making sure userio.h is exported"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: xpad - add support for Razer Wildcat gamepad
  uapi: add missing install of userio.h

4 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Sat, 15 Apr 2017 00:38:24 +0000 (17:38 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "Things seem to be settling down as far as networking is concerned,
  let's hope this trend continues...

   1) Add iov_iter_revert() and use it to fix the behavior of
      skb_copy_datagram_msg() et al., from Al Viro.

   2) Fix the protocol used in the synthetic SKB we cons up for the
      purposes of doing a simulated route lookup for RTM_GETROUTE
      requests. From Florian Larysch.

   3) Don't add noop_qdisc to the per-device qdisc hashes, from Cong
      Wang.

   4) Don't call netdev_change_features with the team lock held, from
      Xin Long.

   5) Revert TCP F-RTO extension to catch more spurious timeouts because
      it interacts very badly with some middle-boxes. From Yuchung
      Cheng.

   6) Fix the loss of error values in l2tp {s,g}etsockopt calls, from
      Guillaume Nault.

   7) ctnetlink uses bit positions where it should be using bit masks,
      fix from Liping Zhang.

   8) Missing RCU locking in netfilter helper code, from Gao Feng.

   9) Avoid double frees and use-after-frees in tcp_disconnect(), from
      Eric Dumazet.

  10) Don't do a changelink before we register the netdevice in
      bridging, from Ido Schimmel.

  11) Lock the ipv6 device address list properly, from Rabin Vincent"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (29 commits)
  netfilter: ipt_CLUSTERIP: Fix wrong conntrack netns refcnt usage
  netfilter: nft_hash: do not dump the auto generated seed
  drivers: net: usb: qmi_wwan: add QMI_QUIRK_SET_DTR for Telit PID 0x1201
  ipv6: Fix idev->addr_list corruption
  net: xdp: don't export dev_change_xdp_fd()
  bridge: netlink: register netdevice before executing changelink
  bridge: implement missing ndo_uninit()
  bpf: reference may_access_skb() from __bpf_prog_run()
  tcp: clear saved_syn in tcp_disconnect()
  netfilter: nf_ct_expect: use proper RCU list traversal/update APIs
  netfilter: ctnetlink: skip dumping expect when nfct_help(ct) is NULL
  netfilter: make it safer during the inet6_dev->addr_list traversal
  netfilter: ctnetlink: make it safer when checking the ct helper name
  netfilter: helper: Add the rcu lock when call __nf_conntrack_helper_find
  netfilter: ctnetlink: using bit to represent the ct event
  netfilter: xt_TCPMSS: add more sanity tests on tcph->doff
  net: tcp: Increase TCP_MIB_OUTRSTS even though fail to alloc skb
  l2tp: don't mask errors in pppol2tp_getsockopt()
  l2tp: don't mask errors in pppol2tp_setsockopt()
  tcp: restrict F-RTO to work-around broken middle-boxes
  ...

4 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 15 Apr 2017 00:00:01 +0000 (17:00 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "A set of small fixes for x86:

   - fix locking in RDT to prevent memory leaks and freeing in use
     memory

   - prevent setting invalid values for vdso32_enabled which cause
     inconsistencies for user space resulting in application crashes.

   - plug a race in the vdso32 code between fork and sysctl which causes
     inconsistencies for user space resulting in application crashes.

   - make MPX signal delivery work in compat mode

   - make the dmesg output of traps and faults readable again"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/intel_rdt: Fix locking in rdtgroup_schemata_write()
  x86/debug: Fix the printk() debug output of signal_fault(), do_trap() and do_general_protection()
  x86/vdso: Plug race between mapping and ELF header setup
  x86/vdso: Ensure vdso32_enabled gets set to valid values only
  x86/signals: Fix lower/upper bound reporting in compat siginfo

4 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 14 Apr 2017 23:58:38 +0000 (16:58 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
 "Two small fixes for perf:

   - the move to support cross arch annotation introduced per arch
     initialization requirements, fullfill them for s/390 (Christian
     Borntraeger)

   - add the missing initialization to the LBR entries to avoid exposing
     random or stale data"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Avoid exposing wrong/stale data in intel_pmu_lbr_read_32()
  perf annotate s390: Fix perf annotate error -95 (4.10 regression)

4 years agoMerge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 14 Apr 2017 23:57:14 +0000 (16:57 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Thomas Gleixner:
 "The irq department provides:

   - two fixes for the CPU affinity spread infrastructure to prevent
     unbalanced spreading in corner cases which leads to horrible
     performance, because interrupts are rather aggregated than spread

   - add a missing spinlock initializer in the imx-gpcv2 init code"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-imx-gpcv2: Fix spinlock initialization
  irq/affinity: Fix extra vecs calculation
  irq/affinity: Fix CPU spread for unbalanced nodes

4 years agoMerge branch 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 14 Apr 2017 23:55:33 +0000 (16:55 -0700)]
Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Thomas Gleixner:
 "Three fixes from EFI land:

   - prevent accessing a Graphic Output Device (GOP) which the kernel
     does not know to handle

   - prevent PCI reconfiguration to modify a BAR which covers the
     framebuffer because that's already in use through the EFI GOP
     interface

   - avoid reserving EFI runtime regions as this results in bogus memory
     mappings"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/efi: Don't try to reserve runtime regions
  efi/fb: Avoid reconfiguration of BAR that covers the framebuffer
  efi/libstub: Skip GOP with PIXEL_BLT_ONLY format

4 years agoMerge branch 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason...
Linus Torvalds [Fri, 14 Apr 2017 23:53:45 +0000 (16:53 -0700)]
Merge branch 'for-linus-4.11' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs fixes from Chris Mason:
 "Dave Sterba collected a few more fixes for the last rc.

  These aren't marked for stable, but I'm putting them in with a batch
  were testing/sending by hand for this release"

* 'for-linus-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix potential use-after-free for cloned bio
  Btrfs: fix segmentation fault when doing dio read
  Btrfs: fix invalid dereference in btrfs_retry_endio
  btrfs: drop the nossd flag when remounting with -o ssd

4 years agoMerge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Fri, 14 Apr 2017 23:51:29 +0000 (16:51 -0700)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull more CIFS fixes from Steve French:
 "As promised, here is the remaining set of cifs/smb3 fixes for stable
  (and a fix for one regression) now that they have had additional
  review and testing"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix SMB3 mount without specifying a security mechanism
  CIFS: store results of cifs_reopen_file to avoid infinite wait
  CIFS: remove bad_network_name flag
  CIFS: reconnect thread reschedule itself
  CIFS: handle guest access errors to Windows shares
  CIFS: Fix null pointer deref during read resp processing

4 years agoftrace: Fix removing of second function probe
Steven Rostedt (VMware) [Fri, 14 Apr 2017 21:45:45 +0000 (17:45 -0400)]
ftrace: Fix removing of second function probe

When two function probes are added to set_ftrace_filter, and then one of
them is removed, the update to the function locations is not performed, and
the record keeping of the function states are corrupted, and causes an
ftrace_bug() to occur.

This is easily reproducable by adding two probes, removing one, and then
adding it back again.

 # cd /sys/kernel/debug/tracing
 # echo schedule:traceoff > set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter
 # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter
 # echo do_IRQ:traceoff > set_ftrace_filter

Causes:
 ------------[ cut here ]------------
 WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220
 Modules linked in: [...]
 CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
 Call Trace:
  dump_stack+0x68/0x9f
  __warn+0x111/0x130
  ? trace_irq_work_interrupt+0xa0/0xa0
  warn_slowpath_null+0x1d/0x20
  ftrace_get_addr_curr+0x143/0x220
  ? __fentry__+0x10/0x10
  ftrace_replace_code+0xe3/0x4f0
  ? ftrace_int3_handler+0x90/0x90
  ? printk+0x99/0xb5
  ? 0xffffffff81000000
  ftrace_modify_all_code+0x97/0x110
  arch_ftrace_update_code+0x10/0x20
  ftrace_run_update_code+0x1c/0x60
  ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0
  register_ftrace_function_probe+0x4b6/0x590
  ? ftrace_startup+0x310/0x310
  ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30
  ? update_stack_state+0x88/0x110
  ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
  ? preempt_count_sub+0x18/0xd0
  ? mutex_lock_nested+0x104/0x800
  ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
  ? __unwind_start+0x1c0/0x1c0
  ? _mutex_lock_nest_lock+0x800/0x800
  ftrace_trace_probe_callback.isra.3+0xc0/0x130
  ? func_set_flag+0xe0/0xe0
  ? __lock_acquire+0x642/0x1790
  ? __might_fault+0x1e/0x20
  ? trace_get_user+0x398/0x470
  ? strcmp+0x35/0x60
  ftrace_trace_onoff_callback+0x48/0x70
  ftrace_regex_write.isra.43.part.44+0x251/0x320
  ? match_records+0x420/0x420
  ftrace_filter_write+0x2b/0x30
  __vfs_write+0xd7/0x330
  ? do_loop_readv_writev+0x120/0x120
  ? locks_remove_posix+0x90/0x2f0
  ? do_lock_file_wait+0x160/0x160
  ? __lock_is_held+0x93/0x100
  ? rcu_read_lock_sched_held+0x5c/0xb0
  ? preempt_count_sub+0x18/0xd0
  ? __sb_start_write+0x10a/0x230
  ? vfs_write+0x222/0x240
  vfs_write+0xef/0x240
  SyS_write+0xab/0x130
  ? SyS_read+0x130/0x130
  ? trace_hardirqs_on_caller+0x182/0x280
  ? trace_hardirqs_on_thunk+0x1a/0x1c
  entry_SYSCALL_64_fastpath+0x18/0xad
 RIP: 0033:0x7fe61c157c30
 RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30
 RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001
 RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700
 R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400
 R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c
  ? trace_hardirqs_off_caller+0xc0/0x110
 ---[ end trace 99fa09b3d9869c2c ]---
 Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150)

Cc: stable@vger.kernel.org
Fixes: 59df055f1991 ("ftrace: trace different functions with a different tracer")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
4 years agoblock: fix bio_will_gap() for first bvec with offset
Ming Lei [Fri, 14 Apr 2017 19:58:29 +0000 (13:58 -0600)]
block: fix bio_will_gap() for first bvec with offset

Commit 729204ef49ec("block: relax check on sg gap") allows us to merge
bios, if both are physically contiguous.  This change can merge a huge
number of small bios, through mkfs for example, mkfs.ntfs running time
can be decreased to ~1/10.

But if one rq starts with a non-aligned buffer (the 1st bvec's bv_offset
is non-zero) and if we allow the merge, it is quite difficult to respect
sg gap limit, especially the max segment size, or we risk having an
unaligned virtual boundary.  This patch tries to avoid the issue by
disallowing a merge, if the req starts with an unaligned buffer.

Also add comments to explain why the merged segment can't end in
unaligned virt boundary.

Fixes: 729204ef49ec ("block: relax check on sg gap")
Tested-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Rewrote parts of the commit message and comments.

Signed-off-by: Jens Axboe <axboe@fb.com>
4 years agoMerge tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linux
Linus Torvalds [Fri, 14 Apr 2017 16:18:17 +0000 (09:18 -0700)]
Merge tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linux

Pull fbdev fixes from Bartlomiej Zolnierkiewicz:

 - fix probing time checks in omapfb driver (regression fix)

 - fix optional VBAT support in ssd1307fb driver (regression fix)

 - fix connecting to backend in xen-fbfront driver

* tag 'fbdev-v4.11-rc6' of git://github.com/bzolnier/linux:
  fbdev: omapfb: delete check_required_callbacks()
  xen, fbfront: fix connecting to backend
  fbdev/ssd1307fb: fix optional VBAT support

4 years agoMerge tag 'pm-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Linus Torvalds [Fri, 14 Apr 2017 16:16:23 +0000 (09:16 -0700)]
Merge tag 'pm-4.11-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix a cpufreq core regression related to CPU online/offline and
  several issues in the turbostat and cpupower utilities.

  Specifics:

   - Allow CPUs to be put back online even if the cpufreq driver is
     unable to work with them (eg. due to missing information from
     platform firmware), which was the previous behavior expected by
     users, but changed in the 4.9 time frame (Chen Yu).

   - Fix a few minor issues in the turbostat utility, introduced mostly
     during the recent update of it (Len Brown, Doug Smythies).

   - Fix a cpupower utility bug causing it to report incorrect values
     for turbo frequencies in some cases (Ben Hutchings)"

* tag 'pm-4.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpupower: Fix turbo frequency reporting for pre-Sandy Bridge cores
  cpufreq: Bring CPUs up even if cpufreq_online() failed
  tools/power turbostat: update version number
  tools/power turbostat: fix impossibly large CPU%c1 value
  tools/power turbostat: turbostat.8 add missing column definitions
  tools/power turbostat: update HWP dump to decimal from hex
  tools/power turbostat: enable package THERM_INTERRUPT dump
  tools/power turbostat: show missing Core and GFX power on SKL and KBL
  tools/power turbostat: bugfix: GFXMHz column not changing