Linus Torvalds [Fri, 11 May 2018 19:30:34 +0000 (12:30 -0700)]
Merge tag 'for-linus-4.17-rc5-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"One fix for the kernel running as a fully virtualized guest using PV
drivers on old Xen hypervisor versions"
* tag 'for-linus-4.17-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: Reset VCPU0 info pointer after shared_info remap
Linus Torvalds [Fri, 11 May 2018 16:52:01 +0000 (09:52 -0700)]
mmap: introduce sane default mmap limits
The internal VM "mmap()" interfaces are based on the mmap target doing
everything using page indexes rather than byte offsets, because
traditionally (ie 32-bit) we had the situation that the byte offset
didn't fit in a register. So while the mmap virtual address was limited
by the word size of the architecture, the backing store was not.
So we're basically passing "pgoff" around as a page index, in order to
be able to describe backing store locations that are much bigger than
the word size (think files larger than 4GB etc).
But while this all makes a ton of sense conceptually, we've been dogged
by various drivers that don't really understand this, and internally
work with byte offsets, and then try to work with the page index by
turning it into a byte offset with "pgoff << PAGE_SHIFT".
Which obviously can overflow.
Adding the size of the mapping to it to get the byte offset of the end
of the backing store just exacerbates the problem, and if you then use
this overflow-prone value to check various limits of your device driver
mmap capability, you're just setting yourself up for problems.
The correct thing for drivers to do is to do their limit math in page
indices, the way the interface is designed. Because the generic mmap
code _does_ test that the index doesn't overflow, since that's what the
mmap code really cares about.
HOWEVER.
Finding and fixing various random drivers is a sisyphean task, so let's
just see if we can just make the core mmap() code do the limiting for
us. Realistically, the only "big" backing stores we need to care about
are regular files and block devices, both of which are known to do this
properly, and which have nice well-defined limits for how much data they
can access.
So let's special-case just those two known cases, and then limit other
random mmap users to a backing store that still fits in "unsigned long".
Realistically, that's not much of a limit at all on 64-bit, and on
32-bit architectures the only worry might be the GPU drivers, which can
have big physical address spaces.
To make it possible for drivers like that to say that they are 64-bit
clean, this patch does repurpose the "FMODE_UNSIGNED_OFFSET" bit in the
file flags to allow drivers to mark their file descriptors as safe in
the full 64-bit mmap address space.
[ The timing for doing this is less than optimal, and this should really
go in a merge window. But realistically, this needs wide testing more
than it needs anything else, and being main-line is the only way to do
that.
So the earlier the better, even if it's outside the proper development
cycle - Linus ]
Cc: Kees Cook <keescook@chromium.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 11 May 2018 16:49:02 +0000 (09:49 -0700)]
Merge tag 'pm-4.17-rc5' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two PCI power management regressions from the 4.13 cycle and
one cpufreq schedutil governor bug introduced during the 4.12 cycle,
drop a stale comment from the schedutil code and fix two mistakes in
docs.
Specifics:
- Restore device_may_wakeup() check in pci_enable_wake() removed
inadvertently during the 4.13 cycle to prevent systems from drawing
excessive power when suspended or off, among other things (Rafael
Wysocki).
- Fix pci_dev_run_wake() to properly handle devices that only can
signal PME# when in the D3cold power state (Kai Heng Feng).
- Fix the schedutil cpufreq governor to avoid using UINT_MAX as the
new CPU frequency in some cases due to a missing check (Rafael
Wysocki).
- Remove a stale comment regarding worker kthreads from the schedutil
cpufreq governor (Juri Lelli).
- Fix a copy-paste mistake in the intel_pstate driver documentation
(Juri Lelli).
- Fix a typo in the system sleep states documentation (Jonathan
Neuschäfer)"
* tag 'pm-4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI / PM: Check device_may_wakeup() in pci_enable_wake()
PCI / PM: Always check PME wakeup capability for runtime wakeup support
cpufreq: schedutil: Avoid using invalid next_freq
cpufreq: schedutil: remove stale comment
PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph
PM: docs: sleep-states: Fix a typo ("includig")
Linus Torvalds [Fri, 11 May 2018 16:46:14 +0000 (09:46 -0700)]
Merge tag 'mtd/fixes-for-4.17-rc5' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
- make nand_soft_waitrdy() wait tWB before polling the status REG
- fix BCH write in the the Marvell NAND controller driver
- fix wrong picosec to msec conversion in the Marvell NAND controller
driver
- fix DMA handling in the TI OneNAND controllre driver
* tag 'mtd/fixes-for-4.17-rc5' of git://git.infradead.org/linux-mtd:
mtd: rawnand: Make sure we wait tWB before polling the STATUS reg
mtd: rawnand: marvell: fix command xtype in BCH write hook
mtd: rawnand: marvell: pass ms delay to wait_op
mtd: onenand: omap2: Disable DMA for HIGHMEM buffers
Linus Torvalds [Fri, 11 May 2018 16:18:02 +0000 (09:18 -0700)]
Merge tag 'drm-fixes-for-v4.17-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"nouveau, amdgpu, i915, vc4, omap, exynos and atomic fixes.
As last week seemed a bit slow, we got a few more fixes this week.
The main stuff is two weeks of fixes for amdgpu, some missing bits of
vega12 atom firmware support were added, and some power management
fixes.
Nouveau got two regression fixes for an DP MST deadlock and a random
oops fix.
i915 got an LVDS panel timeout fix 2 WARN fixes.
exynos fixed a pagefault issue in the mixer driver.
vc4 has an oops fix.
omap had a bunch of uninit var and error-checking fixes. Two atomic
modesetting state fixes.
One minor agp cleanup patch"
* tag 'drm-fixes-for-v4.17-rc5' of git://people.freedesktop.org/~airlied/linux: (30 commits)
drm/amd/pp: Fix performance drop on Fiji
drm/nouveau: Fix deadlock in nv50_mstm_register_connector()
drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client
agp: uninorth: make two functions static
drm/amd/pp: Refine the output of pp_power_profile_mode on VI
drm/amdgpu: Switch to interruptable wait to recover from ring hang.
drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages
drm/amd/display: Use kvzalloc for potentially large allocations
drm/amd/display: Don't return ddc result and read_bytes in same return value
drm/amd/display: Add get_firmware_info_v3_2 for VG12
drm/amd: Add BIOS smu_info v3_3 required struct def.
drm/amd/display: Add VG12 ASIC IDs
drm/vc4: Fix scaling of uni-planar formats
drm/exynos: hdmi: avoid duplicating drm_bridge_attach
drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log
drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout
drm/i915: Adjust eDP's logical vco in a reliable place.
drm/bridge/sii8620: add Kconfig dependency on extcon
drm/omap: handle alloc failures in omap_connector
drm/omap: add missing linefeeds to prints
...
Rafael J. Wysocki [Fri, 11 May 2018 13:17:18 +0000 (15:17 +0200)]
Merge branches 'pm-pci' and 'pm-docs'
* pm-pci:
PCI / PM: Check device_may_wakeup() in pci_enable_wake()
PCI / PM: Always check PME wakeup capability for runtime wakeup support
* pm-docs:
PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph
PM: docs: sleep-states: Fix a typo ("includig")
Jann Horn [Fri, 11 May 2018 00:19:01 +0000 (02:19 +0200)]
compat: fix 4-byte infoleak via uninitialized struct field
Commit
3a4d44b61625 ("ntp: Move adjtimex related compat syscalls to
native counterparts") removed the memset() in compat_get_timex(). Since
then, the compat adjtimex syscall can invoke do_adjtimex() with an
uninitialized ->tai.
If do_adjtimex() doesn't write to ->tai (e.g. because the arguments are
invalid), compat_put_timex() then copies the uninitialized ->tai field
to userspace.
Fix it by adding the memset() back.
Fixes: 3a4d44b61625 ("ntp: Move adjtimex related compat syscalls to native counterparts")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dave Airlie [Fri, 11 May 2018 00:37:07 +0000 (10:37 +1000)]
Merge branch 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Single amdgpu regression fix
* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/pp: Fix performance drop on Fiji
Linus Torvalds [Thu, 10 May 2018 18:42:01 +0000 (11:42 -0700)]
Merge tag 'for-4.17/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- a stable fix for DM integrity to use kvfree
- fix for a 4.17-rc1 change to dm-bufio's buffer alignment
- fixes for a few sparse warnings
- remove VLA usage in DM mirror target
- improve DM thinp Documentation for the "read_only" feature
* tag 'for-4.17/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm thin: update Documentation to clarify when "read_only" is valid
dm mirror: remove VLA usage
dm: fix some sparse warnings and whitespace in dax methods
dm cache background tracker: fix sparse warning
dm bufio: fix buffer alignment
dm integrity: use kvfree for kvmalloc'd memory
Mike Snitzer [Thu, 10 May 2018 15:18:49 +0000 (11:18 -0400)]
dm thin: update Documentation to clarify when "read_only" is valid
Due to user confusion, clarify that it doesn't make sense to try to
create a thin-pool with "read_only" mode enabled.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Rafael J. Wysocki [Tue, 8 May 2018 22:18:32 +0000 (00:18 +0200)]
PCI / PM: Check device_may_wakeup() in pci_enable_wake()
Commit
0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code)
went too far and dropped the device_may_wakeup() check from
pci_enable_wake() which causes wakeup to be enabled during system
suspend, hibernation or shutdown for some PCI devices that are not
allowed by user space to wake up the system from sleep (or power off).
As a result of this, excessive power is drawn by some of the affected
systems while in sleep states or off.
Restore the device_may_wakeup() check in pci_enable_wake(), but make
sure that the PCI bus type's runtime suspend callback will not call
device_may_wakeup() which is about system wakeup from sleep and not
about device wakeup from runtime suspend.
Fixes: 0847684cfc5f0 (PCI / PM: Simplify device wakeup settings code)
Reported-by: Joseph Salisbury <joseph.salisbury@canonical.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Rex Zhu [Thu, 10 May 2018 11:51:09 +0000 (19:51 +0800)]
drm/amd/pp: Fix performance drop on Fiji
The performance drop if the default TDP more than 256 Watt
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Boris Brezillon [Fri, 4 May 2018 19:24:31 +0000 (21:24 +0200)]
mtd: rawnand: Make sure we wait tWB before polling the STATUS reg
NAND chips require a bit of time to take the NAND operation into
account and set the BUSY bit in the STATUS reg. Make sure we don't poll
the STATUS reg too early in nand_soft_waitrdy().
Fixes: 8878b126df76 ("mtd: nand: add ->exec_op() implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Dave Airlie [Thu, 10 May 2018 03:48:52 +0000 (13:48 +1000)]
Merge branch 'linux-4.17' of git://github.com/skeggsb/linux into drm-fixes
Two nouveau crasher/deadlock fixes.
* 'linux-4.17' of git://github.com/skeggsb/linux:
drm/nouveau: Fix deadlock in nv50_mstm_register_connector()
drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client
Lyude Paul [Wed, 2 May 2018 23:38:48 +0000 (19:38 -0400)]
drm/nouveau: Fix deadlock in nv50_mstm_register_connector()
Currently; we're grabbing all of the modesetting locks before adding MST
connectors to fbdev. This isn't actually necessary, and causes a
deadlock as well:
======================================================
WARNING: possible circular locking dependency detected
4.17.0-rc3Lyude-Test+ #1 Tainted: G O
------------------------------------------------------
kworker/1:0/18 is trying to acquire lock:
00000000c832f62d (&helper->lock){+.+.}, at: drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
but task is already holding lock:
00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #3 (crtc_ww_class_mutex){+.+.}:
ww_mutex_lock+0x43/0x80
drm_modeset_lock+0x71/0x130 [drm]
drm_helper_probe_single_connector_modes+0x7d/0x6b0 [drm_kms_helper]
drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper]
__drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper]
nouveau_fbcon_init+0x138/0x1a0 [nouveau]
nouveau_drm_load+0x173/0x7e0 [nouveau]
drm_dev_register+0x134/0x1c0 [drm]
drm_get_pci_dev+0x8e/0x160 [drm]
nouveau_drm_probe+0x1a9/0x230 [nouveau]
pci_device_probe+0xcd/0x150
driver_probe_device+0x30b/0x480
__driver_attach+0xbc/0xe0
bus_for_each_dev+0x67/0x90
bus_add_driver+0x164/0x260
driver_register+0x57/0xc0
do_one_initcall+0x4d/0x323
do_init_module+0x5b/0x1f8
load_module+0x20e5/0x2ac0
__do_sys_finit_module+0xb7/0xd0
do_syscall_64+0x60/0x1b0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #2 (crtc_ww_class_acquire){+.+.}:
drm_helper_probe_single_connector_modes+0x58/0x6b0 [drm_kms_helper]
drm_setup_crtcs+0x15e/0xc90 [drm_kms_helper]
__drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper]
nouveau_fbcon_init+0x138/0x1a0 [nouveau]
nouveau_drm_load+0x173/0x7e0 [nouveau]
drm_dev_register+0x134/0x1c0 [drm]
drm_get_pci_dev+0x8e/0x160 [drm]
nouveau_drm_probe+0x1a9/0x230 [nouveau]
pci_device_probe+0xcd/0x150
driver_probe_device+0x30b/0x480
__driver_attach+0xbc/0xe0
bus_for_each_dev+0x67/0x90
bus_add_driver+0x164/0x260
driver_register+0x57/0xc0
do_one_initcall+0x4d/0x323
do_init_module+0x5b/0x1f8
load_module+0x20e5/0x2ac0
__do_sys_finit_module+0xb7/0xd0
do_syscall_64+0x60/0x1b0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #1 (&dev->mode_config.mutex){+.+.}:
drm_setup_crtcs+0x10c/0xc90 [drm_kms_helper]
__drm_fb_helper_initial_config_and_unlock+0x29/0x480 [drm_kms_helper]
nouveau_fbcon_init+0x138/0x1a0 [nouveau]
nouveau_drm_load+0x173/0x7e0 [nouveau]
drm_dev_register+0x134/0x1c0 [drm]
drm_get_pci_dev+0x8e/0x160 [drm]
nouveau_drm_probe+0x1a9/0x230 [nouveau]
pci_device_probe+0xcd/0x150
driver_probe_device+0x30b/0x480
__driver_attach+0xbc/0xe0
bus_for_each_dev+0x67/0x90
bus_add_driver+0x164/0x260
driver_register+0x57/0xc0
do_one_initcall+0x4d/0x323
do_init_module+0x5b/0x1f8
load_module+0x20e5/0x2ac0
__do_sys_finit_module+0xb7/0xd0
do_syscall_64+0x60/0x1b0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (&helper->lock){+.+.}:
__mutex_lock+0x70/0x9d0
drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
nv50_mstm_register_connector+0x2c/0x50 [nouveau]
drm_dp_add_port+0x2f5/0x420 [drm_kms_helper]
drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
drm_dp_add_port+0x33f/0x420 [drm_kms_helper]
drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper]
drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper]
process_one_work+0x20d/0x650
worker_thread+0x3a/0x390
kthread+0x11e/0x140
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Chain exists of:
&helper->lock --> crtc_ww_class_acquire --> crtc_ww_class_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(crtc_ww_class_mutex);
lock(crtc_ww_class_acquire);
lock(crtc_ww_class_mutex);
lock(&helper->lock);
*** DEADLOCK ***
5 locks held by kworker/1:0/18:
#0:
000000004a05cd50 ((wq_completion)"events_long"){+.+.}, at: process_one_work+0x187/0x650
#1:
00000000601c11d1 ((work_completion)(&mgr->work)){+.+.}, at: process_one_work+0x187/0x650
#2:
00000000586ca0df (&dev->mode_config.mutex){+.+.}, at: drm_modeset_lock_all+0x3a/0x1b0 [drm]
#3:
00000000d3ca0ffa (crtc_ww_class_acquire){+.+.}, at: drm_modeset_lock_all+0x44/0x1b0 [drm]
#4:
00000000942e28e2 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_backoff+0x8e/0x1c0 [drm]
stack backtrace:
CPU: 1 PID: 18 Comm: kworker/1:0 Tainted: G O 4.17.0-rc3Lyude-Test+ #1
Hardware name: Gateway FX6840/FX6840, BIOS P01-A3 05/17/2010
Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper]
Call Trace:
dump_stack+0x85/0xcb
print_circular_bug.isra.38+0x1ce/0x1db
__lock_acquire+0x128f/0x1350
? lock_acquire+0x9f/0x200
? lock_acquire+0x9f/0x200
? __ww_mutex_lock.constprop.13+0x8f/0x1000
lock_acquire+0x9f/0x200
? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
__mutex_lock+0x70/0x9d0
? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
? ww_mutex_lock+0x43/0x80
? _cond_resched+0x15/0x30
? ww_mutex_lock+0x43/0x80
? drm_modeset_lock+0xb2/0x130 [drm]
? drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
drm_fb_helper_add_one_connector+0x2a/0x60 [drm_kms_helper]
nv50_mstm_register_connector+0x2c/0x50 [nouveau]
drm_dp_add_port+0x2f5/0x420 [drm_kms_helper]
? mark_held_locks+0x50/0x80
? kfree+0xcf/0x2a0
? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper]
? trace_hardirqs_on_caller+0xed/0x180
? drm_dp_check_mstb_guid+0xd6/0x120 [drm_kms_helper]
drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
drm_dp_add_port+0x33f/0x420 [drm_kms_helper]
? nouveau_connector_aux_xfer+0x7c/0xb0 [nouveau]
? find_held_lock+0x2d/0x90
? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper]
? __mutex_unlock_slowpath+0x3b/0x280
? drm_dp_dpcd_access+0xd9/0xf0 [drm_kms_helper]
drm_dp_send_link_address+0x155/0x1e0 [drm_kms_helper]
drm_dp_check_and_send_link_address+0x87/0xd0 [drm_kms_helper]
drm_dp_mst_link_probe_work+0x4d/0x80 [drm_kms_helper]
process_one_work+0x20d/0x650
worker_thread+0x3a/0x390
? process_one_work+0x650/0x650
kthread+0x11e/0x140
? kthread_create_worker_on_cpu+0x50/0x50
ret_from_fork+0x3a/0x50
Taking example from i915, the only time we need to hold any modesetting
locks is when changing the port on the mstc, and in that case we only
need to hold the connection mutex.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 8 May 2018 10:39:47 +0000 (20:39 +1000)]
drm/nouveau/ttm: don't dereference nvbo::cli, it can outlive client
Potentially responsible for some random OOPSes.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [v4.15+]
Dave Airlie [Thu, 10 May 2018 01:28:46 +0000 (11:28 +1000)]
Merge branch 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
A little bigger than normal since this is two weeks of fixes.
- Atom firmware table updates for vega12
- Fix fallout from huge page support
- Fix up smu7 power profile interface to be consistent with vega
- Misc other fixes
* 'drm-fixes-4.17' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/pp: Refine the output of pp_power_profile_mode on VI
drm/amdgpu: Switch to interruptable wait to recover from ring hang.
drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages
drm/amd/display: Use kvzalloc for potentially large allocations
drm/amd/display: Don't return ddc result and read_bytes in same return value
drm/amd/display: Add get_firmware_info_v3_2 for VG12
drm/amd: Add BIOS smu_info v3_3 required struct def.
drm/amd/display: Add VG12 ASIC IDs
Dave Airlie [Thu, 10 May 2018 01:28:27 +0000 (11:28 +1000)]
Merge tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
atomic: Clear state pointers on clear (Ville)
vc4: Fix oops in dpi disable (Eric)
omap: Various error-checking + uninitialized var fixes (Tomi)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
* tag 'drm-misc-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-misc:
drm/vc4: Fix scaling of uni-planar formats
drm/bridge/sii8620: add Kconfig dependency on extcon
drm/omap: handle alloc failures in omap_connector
drm/omap: add missing linefeeds to prints
drm/omap: handle error if scale coefs are not found
drm/omap: check return value from soc_device_match
drm/omap: fix possible NULL ref issue in tiler_reserve_2d
drm/omap: fix uninitialized ret variable
drm/omap: silence unititialized variable warning
drm/vc4: Fix oops dereferencing DPI's connector since panel_bridge.
drm/atomic: Clean private obj old_state/new_state in drm_atomic_state_default_clear()
drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear()
Dave Airlie [Thu, 10 May 2018 01:27:47 +0000 (11:27 +1000)]
Merge tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Increase LVDS panel timeout to 5s to avoid spurious *ERROR*
- Fix 2 WARNS: BIOS framebuffer related (FDO #105992) and eDP cdclk mismatch
* tag 'drm-intel-fixes-2018-05-09' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log
drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout
drm/i915: Adjust eDP's logical vco in a reliable place.
Dave Airlie [Thu, 10 May 2018 01:27:04 +0000 (11:27 +1000)]
Merge tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-fixes
Fixup pagefault issue of mixer driver
- it makes sure to check shadow register for interlace scan.
- it corrects chroma_addr[1], height and vertical position values.
And trivial cleanup
- it just removes duplicated drm_bridge_attach.
* tag 'exynos-drm-fixes-for-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
drm/exynos: hdmi: avoid duplicating drm_bridge_attach
drm/exynos: mixer: avoid Oops in vp_video_buffer()
drm/exynos/mixer: fix synchronization check in interlaced mode
Mathieu Malaterre [Sat, 5 May 2018 19:54:05 +0000 (21:54 +0200)]
agp: uninorth: make two functions static
Both ‘uninorth_remove_memory’ and ‘null_cache_flush’ can be made
static. So make them.
Silence the following gcc warning (W=1):
drivers/char/agp/uninorth-agp.c:198:5: warning: no previous prototype for ‘uninorth_remove_memory’ [-Wmissing-prototypes]
and
drivers/char/agp/uninorth-agp.c:473:6: warning: no previous prototype for ‘null_cache_flush’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Wed, 9 May 2018 20:49:52 +0000 (10:49 -1000)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- quirk for Toshiba Click Mini L9W-B, from Hans de Goede
- intel-ish-hid and wacom error handling (device freeing) path fixes
from Arvind Yadav
- memory corruption fix in intel-ish-hid driver from Hans de Goede
- a few new device ID additions to hid-lenovo from Peter Ganzhorn
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: i2c-hid: Add RESEND_REPORT_DESCR quirk for Toshiba Click Mini L9W-B
HID: intel-ish-hid: use put_device() instead of kfree()
HID: intel_ish-hid: Stop using a static local buffer in get_report()
HID: intel_ish-hid: Move header size check to inside the loop
HID: wacom: Release device resource data obtained by devres_alloc()
HID: lenovo: Add support for IBM/Lenovo Scrollpoint mice
Rex Zhu [Mon, 7 May 2018 06:23:04 +0000 (14:23 +0800)]
drm/amd/pp: Refine the output of pp_power_profile_mode on VI
In order to keep consist with Vega,
the output format of the pp_power_profile_mode would be
<integer><mode name string>< “*” for current profile>:"detail settings"
and remove the "CURRENT" mode line.
for example:
NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL
0 3D_FULL_SCREEN: 0 100 30 0 100 10
1 POWER_SAVING: 10 0 30 - - -
2 VIDEO: - - - 10 16 31
3 VR: 0 11 50 0 100 10
4 COMPUTE: 0 5 30 - - -
5 CUSTOM *: 0 5 30 0 100 10
NUM MODE_NAME SCLK_UP_HYST SCLK_DOWN_HYST SCLK_ACTIVE_LEVEL MCLK_UP_HYST MCLK_DOWN_HYST MCLK_ACTIVE_LEVEL
0 3D_FULL_SCREEN: 0 100 30 0 100 10
1 POWER_SAVING *: 10 0 30 0 100 10
2 VIDEO: - - - 10 16 31
3 VR: 0 11 50 0 100 10
4 COMPUTE: 0 5 30 - - -
5 CUSTOM: - - - - - -
Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Mon, 30 Apr 2018 14:04:42 +0000 (10:04 -0400)]
drm/amdgpu: Switch to interruptable wait to recover from ring hang.
v2:
Use dma_fence_wait instead of dma_fence_wait_timeout(...,MAX_SCHEDULE_TIMEOUT)
Avoid printing error message for ERESTARTSYS
Originally-by: David Panariti <David.Panariti@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Wed, 25 Apr 2018 15:32:10 +0000 (17:32 +0200)]
drm/ttm: Use GFP_TRANSHUGE_LIGHT for allocating huge pages
GFP_TRANSHUGE tries very hard to allocate huge pages, which can result
in long delays with high memory pressure. I have observed firefox
freezing for up to around a minute due to this while restic was taking
a full system backup.
Since we don't really need huge pages, use GFP_TRANSHUGE_LIGHT |
__GFP_NORETRY instead, in order to fail quickly when there are no huge
pages available.
Set __GFP_KSWAPD_RECLAIM as well, in order for huge pages to be freed
up in the background if necessary.
With these changes, I'm no longer seeing freezes during a restic backup.
Cc: stable@vger.kernel.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Michel Dänzer [Tue, 17 Apr 2018 10:25:22 +0000 (12:25 +0200)]
drm/amd/display: Use kvzalloc for potentially large allocations
Allocating up to 32 physically contiguous pages can easily fail (and has
failed for me), and isn't necessary anyway.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Tue, 24 Apr 2018 14:49:20 +0000 (10:49 -0400)]
drm/amd/display: Don't return ddc result and read_bytes in same return value
The two ranges overlap.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 20 Apr 2018 14:56:18 +0000 (10:56 -0400)]
drm/amd/display: Add get_firmware_info_v3_2 for VG12
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jerry (Fangzhi) Zuo [Mon, 5 Mar 2018 19:59:57 +0000 (14:59 -0500)]
drm/amd: Add BIOS smu_info v3_3 required struct def.
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Harry Wentland [Fri, 20 Apr 2018 15:05:07 +0000 (11:05 -0400)]
drm/amd/display: Add VG12 ASIC IDs
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Hans de Goede [Thu, 3 May 2018 09:32:33 +0000 (11:32 +0200)]
HID: i2c-hid: Add RESEND_REPORT_DESCR quirk for Toshiba Click Mini L9W-B
The 0457:10fb touchscreen found on the Toshiba Click Mini L9W-B needs
to have a report-decriptors command send to it on resume in order for
the touchscreen to start generating events again on resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Kai Heng Feng [Mon, 7 May 2018 06:11:20 +0000 (14:11 +0800)]
PCI / PM: Always check PME wakeup capability for runtime wakeup support
USB controller ASM1042 stops working after commit
de3ef1eb1cd0 (PM /
core: Drop run_wake flag from struct dev_pm_info).
The device in question is not power managed by platform firmware,
furthermore, it only supports PME# from D3cold:
Capabilities: [78] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0-,D1-,D2-,D3hot-,D3cold+)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Before commit
de3ef1eb1cd0, the device never gets runtime suspended.
After that commit, the device gets runtime suspended to D3hot, which can
not generate any PME#.
usb_hcd_pci_probe() unconditionally calls device_wakeup_enable(), hence
device_can_wakeup() in pci_dev_run_wake() always returns true.
So pci_dev_run_wake() needs to check PME wakeup capability as its first
condition.
In addition, change wakeup flag passed to pci_target_state() from false
to true, because we want to find the deepest state different from D3cold
that the device can still generate PME#. In this case, it's D0 for the
device in question.
Fixes: de3ef1eb1cd0 (PM / core: Drop run_wake flag from struct dev_pm_info)
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: 4.13+ <stable@vger.kernel.org> # 4.13+
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Wed, 9 May 2018 09:44:56 +0000 (11:44 +0200)]
cpufreq: schedutil: Avoid using invalid next_freq
If the next_freq field of struct sugov_policy is set to UINT_MAX,
it shouldn't be used for updating the CPU frequency (this is a
special "invalid" value), but after commit
b7eaf1aab9f8 (cpufreq:
schedutil: Avoid reducing frequency of busy CPUs prematurely) it
may be passed as the new frequency to sugov_update_commit() in
sugov_update_single().
Fix that by adding an extra check for the special UINT_MAX value
of next_freq to sugov_update_single().
Fixes: b7eaf1aab9f8 (cpufreq: schedutil: Avoid reducing frequency of busy CPUs prematurely)
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Cc: 4.12+ <stable@vger.kernel.org> # 4.12+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Juri Lelli [Wed, 9 May 2018 08:40:51 +0000 (10:40 +0200)]
cpufreq: schedutil: remove stale comment
After commit
794a56ebd9a57 (sched/cpufreq: Change the worker kthread to
SCHED_DEADLINE) schedutil kthreads are "ignored" for a clock frequency
selection point of view, so the potential corner case for RT tasks is not
possible at all now.
Remove the stale comment mentioning it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Juri Lelli [Tue, 8 May 2018 15:12:09 +0000 (17:12 +0200)]
PM: docs: intel_pstate: fix Active Mode w/o HWP paragraph
P-state selection algorithm (powersave or performance) is selected by
echoing the desired choice to scaling_governor sysfs attribute and not
to scaling_cur_freq (as currently stated).
Fix it.
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jonathan Neuschäfer [Wed, 25 Apr 2018 10:07:03 +0000 (12:07 +0200)]
PM: docs: sleep-states: Fix a typo ("includig")
Fix a typo in admin-guide/pm/sleep-states.rst.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Boris Brezillon [Mon, 7 May 2018 12:13:03 +0000 (14:13 +0200)]
drm/vc4: Fix scaling of uni-planar formats
When using uni-planar formats (like RGB), the scaling parameters are
stored in plane 0, not plane 1.
Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.")
Cc: stable@vger.kernel.org
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180507121303.5610-1-boris.brezillon@bootlin.com
Peter Rosin [Wed, 2 May 2018 07:40:25 +0000 (09:40 +0200)]
drm/exynos: hdmi: avoid duplicating drm_bridge_attach
drm_bridge_attach takes care of these assignments, so there is no need
to open-code them a second time.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Linus Torvalds [Tue, 8 May 2018 15:40:17 +0000 (05:40 -1000)]
Merge branch 'for-4.17-fixes' of git://git./linux/kernel/git/tj/libata
Pull libata fixes from Tejun Heo:
"An earlier commit to add reset control for embedded ahci controllers
affected some of the hardware specific drivers and got reverted for
now.
Other than that, just per-device workarounds and trivial changes"
* 'for-4.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
driver core: add __printf verification to __ata_ehi_pushv_desc
ata: fix spelling mistake: "directon" -> "direction"
libata: Apply NOLPM quirk for SanDisk SD7UB3Q*G1001 SSDs
libata: Apply NOLPM quirk for SAMSUNG MZMPC128HBFU-000MV SSD
ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI
libahci: Allow drivers to override stop_engine
Revert "ata: ahci-platform: add reset control support"
Linus Torvalds [Tue, 8 May 2018 15:37:17 +0000 (05:37 -1000)]
Merge tag 'pinctrl-v4.17-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Here are three pin control fixes.
The Intel fixes are the most serious and important things I had queued
since it affects a large portion of deployed Chromebooks.
- Two major fixes for the Intel Cherryview and Sunrisepoint pin
controllers, adjusting numberspaces so that they get aligned with
various messed-up numbers encoded into the BIOS.
- A fix for the Meson driver GPIO pin range"
* tag 'pinctrl-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunrisepoint: Align GPIO number space with Windows
pinctrl: cherryview: Associate IRQ descriptors to irqdomain
pinctrl: meson-axg: fix the range of aobus bank
Linus Torvalds [Tue, 8 May 2018 15:35:12 +0000 (05:35 -1000)]
Merge tag 'gpio-v4.17-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Sorry for lagging behind on sending the first batch of GPIO fixes for
this cycle. Just too busy conferencing and the weather was too nice.
Here it is anyway: some real important polishing on the error path
facing userspace (tagged for stable as well) and some normal driver
fixes.
- Fix proper IRQ unmasking in the Aspeed driver.
- Do not free unrequested descriptors on the errorpath when creating
line handles from the userspace chardev requested GPIO lines.
- Also fix the errorpath in the linehandle creation function.
- Fix the get/set multiple GPIO lines for a few of the funky
industrial GPIO cards on the ISA bus"
* tag 'gpio-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pcie-idio-24: Fix off-by-one error in get_multiple loop
gpio: pcie-idio-24: Fix port memory offset for get_multiple/set_multiple callbacks
gpio: pci-idio-16: Fix port memory offset for get_multiple callback
gpio: fix error path in lineevent_create
gpioib: do not free unrequested descriptors
gpio: fix aspeed_gpio unmask irq
Florent Flament [Thu, 19 Apr 2018 16:07:00 +0000 (19:07 +0300)]
drm/i915: Fix drm:intel_enable_lvds ERROR message in kernel log
Fix `[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to
power on` in kernel log at boot time.
Toshiba Satellite Z930 laptops needs between 1 and 2 seconds to power
on its screen during Intel i915 DRM initialization. This currently
results in a `[drm:intel_enable_lvds] *ERROR* timed out waiting for
panel to power on` message appearing in the kernel log during boot
time and when stopping the machine.
This change increases the timeout of the `intel_enable_lvds` function
from 1 to 5 seconds, letting enough time for the Satellite 930 LCD
screen to power on, and suppressing the error message from the kernel
log.
This patch has been successfully tested on Linux 4.14 running on a
Toshiba Satellite Z930.
[vsyrjala: bump the timeout from 2 to 5 seconds to match the DP
code and properly cover the max hw timeout of ~4 seconds, and
drop the comment about the specific machine since this is not
a particulary surprising issue, nor specific to that one machine]
Signed-off-by: Florent Flament <contact@florentflament.com>
Cc: stable@vger.kernel.org
Cc: Pavel Petrovic <ppetrovic@acm.org>
Cc: Sérgio M. Basto <sergio@serjux.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103414
References: https://bugzilla.kernel.org/show_bug.cgi?id=57591
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180419160700.19828-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit
280b54ade5914d3b4abe4f0ebe083ddbd4603246)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Ville Syrjälä [Thu, 26 Apr 2018 16:30:15 +0000 (19:30 +0300)]
drm/i915: Correctly populate user mode h/vdisplay with pipe src size during readout
During state readout we first read out the pipe src size, store
that information in the user mode h/vdisplay, but later on we overwrite
that with the actual crtc timings. That makes our read out crtc state
inconsistent with itself when the BIOS has enabled the panel fitter to
scale the pipe contents. Let's preserve the pipe src size based
information in the user mode to make things consistent again.
This fixes a problem introduced by commit
a2936e3d9a9c ("drm/i915:
Use drm_mode_get_hv_timing() to populate plane clip rectangle")
where the inconsistent state is now leading the plane clipping code
to report a failure on account the plane dst coordinates not matching
the user mode size. Previously we did the plane clipping based on
the pipe src size instead and thus never noticed the inconsistency.
The failure manifests as a WARN:
[ 0.762117] [drm:intel_dump_pipe_config [i915]] requested mode:
[ 0.762142] [drm:drm_mode_debug_printmodeline [drm]] Modeline 0:"1366x768" 60 72143 1366 1414 1446 1526 768 771 777 784 0x40 0xa
...
[ 0.762327] [drm:intel_dump_pipe_config [i915]] port clock: 72143, pipe src size: 1024x768, pixel rate 72143
...
[ 0.764666] [drm:drm_atomic_helper_check_plane_state [drm_kms_helper]] Plane must cover entire CRTC
[ 0.764690] [drm:drm_rect_debug_print [drm]] dst: 1024x768+0+0
[ 0.764711] [drm:drm_rect_debug_print [drm]] clip: 1366x768+0+0
[ 0.764713] ------------[ cut here ]------------
[ 0.764714] Could not determine valid watermarks for inherited state
[ 0.764792] WARNING: CPU: 4 PID: 159 at drivers/gpu/drm/i915/intel_display.c:14584 intel_modeset_init+0x3ce/0x19d0 [i915]
...
Cc: FadeMind <fademind@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reported-by: FadeMind <fademind@gmail.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Tested-by: Dave Jones <davej@codemonkey.org.uk>
References: https://lists.freedesktop.org/archives/intel-gfx/2018-April/163186.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105992
Fixes: a2936e3d9a9c ("drm/i915: Use drm_mode_get_hv_timing() to populate plane clip rectangle")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180426163015.14232-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: FadeMind <fademind@gmail.com>
(cherry picked from commit
bd4cd03c81010dcd4e6f0e02e4c15f44aefe12d1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Rodrigo Vivi [Wed, 2 May 2018 17:52:55 +0000 (10:52 -0700)]
drm/i915: Adjust eDP's logical vco in a reliable place.
On intel_dp_compute_config() we were calculating the needed vco
for eDP on gen9 and we stashing it in
intel_atomic_state.cdclk.logical.vco
However few moments later on intel_modeset_checks() we fully
replace entire intel_atomic_state.cdclk.logical with
dev_priv->cdclk.logical fully overwriting the logical desired
vco for eDP on gen9.
So, with wrong VCO value we end up with wrong desired cdclk, but
also it will raise a lot of WARNs: On gen9, when we read
CDCLK_CTL to verify if we configured properly the desired
frequency the CD Frequency Select bits [27:26] == 10b can mean
337.5 or 308.57 MHz depending on the VCO. So if we have wrong
VCO value stashed we will believe the frequency selection didn't
stick and start to raise WARNs of cdclk mismatch.
[ 42.857519] [drm:intel_dump_cdclk_state [i915]] Changing CDCLK to 308571 kHz, VCO
8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[ 42.897269] cdclk state doesn't match!
[ 42.901052] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[ 42.938004] RIP: 0010:intel_set_cdclk+0x5d/0x110 [i915]
[ 43.155253] WARNING: CPU: 5 PID: 1116 at drivers/gpu/drm/i915/intel_cdclk.c:2084 intel_set_cdclk+0x5d/0x110 [i915]
[ 43.170277] [drm:intel_dump_cdclk_state [i915]] [hw state] 337500 kHz, VCO
8100000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
[ 43.182566] [drm:intel_dump_cdclk_state [i915]] [sw state] 308571 kHz, VCO
8640000 kHz, ref 24000 kHz, bypass 24000 kHz, voltage level 0
v2: Move the entire eDP's vco logical adjustment to inside
the skl_modeset_calc_cdclk as suggested by Ville.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: bb0f4aab0e76 ("drm/i915: Track full cdclk state for the logical and actual cdclk frequencies")
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20180502175255.5344-1-rodrigo.vivi@intel.com
(cherry picked from commit
3297234a05ab1e90091b0574db4c397ef0e90d5f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
van der Linden, Frank [Fri, 4 May 2018 20:11:00 +0000 (16:11 -0400)]
x86/xen: Reset VCPU0 info pointer after shared_info remap
This patch fixes crashes during boot for HVM guests on older (pre HVM
vector callback) Xen versions. Without this, current kernels will always
fail to boot on those Xen versions.
Sample stack trace:
BUG: unable to handle kernel paging request at
ffffffffff200000
IP: __xen_evtchn_do_upcall+0x1e/0x80
PGD
1e0e067 P4D
1e0e067 PUD
1e10067 PMD
235c067 PTE 0
Oops: 0002 [#1] SMP PTI
Modules linked in:
CPU: 0 PID: 512 Comm: kworker/u2:0 Not tainted 4.14.33-52.13.amzn1.x86_64 #1
Hardware name: Xen HVM domU, BIOS 3.4.3.amazon 11/11/2016
task:
ffff88002531d700 task.stack:
ffffc90000480000
RIP: 0010:__xen_evtchn_do_upcall+0x1e/0x80
RSP: 0000:
ffff880025403ef0 EFLAGS:
00010046
RAX:
ffffffff813cc760 RBX:
ffffffffff200000 RCX:
ffffc90000483ef0
RDX:
ffff880020540a00 RSI:
ffff880023c78000 RDI:
000000000000001c
RBP:
0000000000000001 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000000
R13:
ffff880025403f5c R14:
0000000000000000 R15:
0000000000000000
FS:
0000000000000000(0000) GS:
ffff880025400000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffff200000 CR3:
0000000001e0a000 CR4:
00000000000006f0
Call Trace:
<IRQ>
do_hvm_evtchn_intr+0xa/0x10
__handle_irq_event_percpu+0x43/0x1a0
handle_irq_event_percpu+0x20/0x50
handle_irq_event+0x39/0x60
handle_fasteoi_irq+0x80/0x140
handle_irq+0xaf/0x120
do_IRQ+0x41/0xd0
common_interrupt+0x7d/0x7d
</IRQ>
During boot, the HYPERVISOR_shared_info page gets remapped to make it work
with KASLR. This means that any pointer derived from it needs to be
adjusted.
The only value that this applies to is the vcpu_info pointer for VCPU 0.
For PV and HVM with the callback vector feature, this gets done via the
smp_ops prepare_boot_cpu callback. Older Xen versions do not support the
HVM callback vector, so there is no Xen-specific smp_ops set up in that
scenario. So, the vcpu_info pointer for VCPU 0 never gets set to the proper
value, and the first reference of it will be bad. Fix this by resetting it
immediately after the remap.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Reviewed-by: Eduardo Valentin <eduval@amazon.com>
Reviewed-by: Alakesh Haloi <alakeshh@amazon.com>
Reviewed-by: Vallish Vaidyeshwara <vallish@amazon.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Florian La Roche [Sun, 6 May 2018 17:34:07 +0000 (19:34 +0200)]
Fix typo in comment.
CONFIG_PRREMPT -> CONFIG_PREEMPT
Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 7 May 2018 15:33:29 +0000 (05:33 -1000)]
Merge tag 'devicetree-fixes-for-4.17' of git://git./linux/kernel/git/robh/linux
Pull DeviceTree fixes from Rob Herring:
- fix path to display timing binding
- fix some typos in interrupt-names and clock-names
- fix a resource leak on overlay removal
- add missing documentation for R8A77965 DMA, serial, and net
- cleanup sunxi pinctrl description
- add Kieback & Peter GmbH vendor prefix
* tag 'devicetree-fixes-for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: panel: lvds: Fix path to display timing bindings
dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/
dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/
of: overlay: Stop leaking resources on overlay removal
dtc: checks: drop warning for missing PCI bridge bus-range
dt-bindings: dmaengine: rcar-dmac: document R8A77965 support
dt-bindings: serial: sh-sci: Add support for r8a77965 (H)SCIF
dt-bindings: net: ravb: Add support for r8a77965 SoC
dt-bindings: pinctrl: sunxi: Fix reference to driver
doc: Add vendor prefix for Kieback & Peter GmbH
Mathieu Malaterre [Sat, 5 May 2018 20:00:37 +0000 (22:00 +0200)]
driver core: add __printf verification to __ata_ehi_pushv_desc
__printf is useful to verify format and arguments. Remove the following
warning (with W=1):
drivers/ata/libata-eh.c:183:10: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Andrzej Hajda [Mon, 9 Apr 2018 06:27:08 +0000 (08:27 +0200)]
drm/bridge/sii8620: add Kconfig dependency on extcon
The driver can work with or without extcon framework, but if extcon is
build as module, sii8620 should be build as module as well.
Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180409062708.4326-1-a.hajda@samsung.com
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tomi Valkeinen [Wed, 2 May 2018 09:11:59 +0000 (12:11 +0300)]
drm/omap: handle alloc failures in omap_connector
Handle memory allocation failures in omap_connector to avoid NULL
derefs.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-5-tomi.valkeinen@ti.com
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tomi Valkeinen [Wed, 2 May 2018 09:11:58 +0000 (12:11 +0300)]
drm/omap: add missing linefeeds to prints
A bunch of debug and error prints are missing linefeeds. Add those.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-4-tomi.valkeinen@ti.com
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tomi Valkeinen [Wed, 2 May 2018 09:11:57 +0000 (12:11 +0300)]
drm/omap: handle error if scale coefs are not found
If get_scale_coef functions fail, they return NULL, but we never check
the return value and could do a NULL deref. This should not happen as we
ought to validate the amount of scaling already earlier, but to be safe,
add the necessary check.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-3-tomi.valkeinen@ti.com
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tomi Valkeinen [Wed, 2 May 2018 09:11:56 +0000 (12:11 +0300)]
drm/omap: check return value from soc_device_match
soc_device_match() can return NULL, so add a check and fail if
soc_device_match() fails.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-2-tomi.valkeinen@ti.com
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tomi Valkeinen [Thu, 29 Mar 2018 10:40:37 +0000 (13:40 +0300)]
drm/omap: fix possible NULL ref issue in tiler_reserve_2d
tiler_reserve_2d allocates memory but does not check if it got the
memory. Add the check and return ENOMEM on failure.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-2-tomi.valkeinen@ti.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Tomi Valkeinen [Thu, 29 Mar 2018 10:40:36 +0000 (13:40 +0300)]
drm/omap: fix uninitialized ret variable
audio_config function for both HDMI4 and HDMI5 return uninitialized
value as the error code if the display is not currently enabled. For
some reason this has not caused any issues.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-1-tomi.valkeinen@ti.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Dan Carpenter [Wed, 18 Apr 2018 14:29:37 +0000 (17:29 +0300)]
drm/omap: silence unititialized variable warning
Smatch complains that "area_free" could be used without being
initialized. This code is several years old and premusably works fine
so this can't be a very serious bug. But it's easy enough to silence
the warning. If "area_free" is false at the end of the function then
we return -ENOMEM.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418142937.GA13828@mwanda
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Eric Anholt [Fri, 9 Mar 2018 23:32:56 +0000 (15:32 -0800)]
drm/vc4: Fix oops dereferencing DPI's connector since panel_bridge.
In the cleanup, I didn't notice that we needed to dereference the
connector for the bus_format. Fix the regression by looking up the
first (and only) connector attached to us, and assume that its
bus_format is what we want. Some day it would be good to have that
part of display_info attached to the bridge, instead.
v2: Fix stray whitespace change
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 7b1298e05310 ("drm/vc4: Switch DPI to using the panel-bridge helper.")
Link: https://patchwork.freedesktop.org/patch/msgid/20180309233256.1667-1-eric@anholt.net
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Ville Syrjälä [Wed, 2 May 2018 18:32:47 +0000 (21:32 +0300)]
drm/atomic: Clean private obj old_state/new_state in drm_atomic_state_default_clear()
Clear the old_state and new_state pointers for private objects
in drm_atomic_state_default_clear(). We don't actually have
functions to get the new/old state for private objects so
getting access to the potentially stale pointers requires a
bit more manual labour than for other object types. But let's
clear the pointers for private objects as well, if only to
avoid future surprises when someone decides to add the functions
to get at them.
v2: Split private objs to a separate patch (Daniel)
Cc: <stable@vger.kernel.org> # v4.14+
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Abhay Kumar <abhay.kumar@intel.com>
Fixes: a4370c777406 (drm/atomic: Make private objs proper objects)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Ville Syrjälä [Wed, 2 May 2018 18:32:47 +0000 (21:32 +0300)]
drm/atomic: Clean old_state/new_state in drm_atomic_state_default_clear()
Clear the old_state and new_state pointers for every object in
drm_atomic_state_default_clear(). Otherwise
drm_atomic_get_{new,old}_*_state() will hand out stale pointers to
anyone who hasn't first confirmed that the object is in fact part of
the current atomic transcation, if they are called after we've done
the ww backoff dance while hanging on to the same drm_atomic_state.
For example, handle_conflicting_encoders() looks like it could hit
this since it iterates the full connector list and just calls
drm_atomic_get_new_connector_state() for each.
And I believe we have now witnessed this happening at least once in
i915 check_digital_port_conflicts(). Commit
8b69449d2663 ("drm/i915:
Remove last references to drm_atomic_get_existing* macros") changed
the safe drm_atomic_get_existing_connector_state() to the unsafe
drm_atomic_get_new_connector_state(), which opened the doors for
this particular bug there as well.
v2: Split private objs out to a separate patch (Daniel)
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Abhay Kumar <abhay.kumar@intel.com>
Fixes: 581e49fe6b41 ("drm/atomic: Add new iterators over all state, v3.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502183247.5746-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Linus Torvalds [Mon, 7 May 2018 02:57:38 +0000 (16:57 -1000)]
Linux 4.17-rc4
Linus Torvalds [Sun, 6 May 2018 15:46:29 +0000 (05:46 -1000)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pll KVM fixes from Radim Krčmář:
"ARM:
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
x86:
- Speed up injection of expired timers (for stable)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: remove APIC Timer periodic/oneshot spikes
arm64: vgic-v2: Fix proxying of cpuif access
KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance
KVM: arm64: Fix order of vcpu_write_sys_reg() arguments
KVM: arm/arm64: vgic: Fix source vcpu issues for GICv2 SGI
Linus Torvalds [Sun, 6 May 2018 15:42:24 +0000 (05:42 -1000)]
Merge tag 'iommu-fixes-v4.17-rc4' of git://git./linux/kernel/git/joro/iommu
Pull iommu fixes from Joerg Roedel:
- fix a compile warning in the AMD IOMMU driver with irq remapping
disabled
- fix for VT-d interrupt remapping and invalidation size (caused a
BUG_ON when trying to invalidate more than 4GB)
- build fix and a regression fix for broken graphics with old DTS for
the rockchip iommu driver
- a revert in the PCI window reservation code which fixes a regression
with VFIO.
* tag 'iommu-fixes-v4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu: rockchip: fix building without CONFIG_OF
iommu/vt-d: Use WARN_ON_ONCE instead of BUG_ON in qi_flush_dev_iotlb()
iommu/vt-d: fix shift-out-of-bounds in bug checking
iommu/dma: Move PCI window region reservation back into dma specific path.
iommu/rockchip: Make clock handling optional
iommu/amd: Hide unused iommu_table_lock
iommu/vt-d: Fix usage of force parameter in intel_ir_reconfigure_irte()
Linus Torvalds [Sun, 6 May 2018 15:37:24 +0000 (05:37 -1000)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"Unbreak the CPUID CPUID_8000_0008_EBX reload which got dropped when
the evaluation of physical and virtual bits which uses the same CPUID
leaf was moved out of get_cpu_cap()"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Restore CPUID_8000_0008_EBX reload
Linus Torvalds [Sun, 6 May 2018 15:35:23 +0000 (05:35 -1000)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull clocksource fixes from Thomas Gleixner:
"The recent addition of the early TSC clocksource breaks on machines
which have an unstable TSC because in case that TSC is disabled, then
the clocksource selection logic falls back to the early TSC which is
obviously bogus.
That also unearthed a few robustness issues in the clocksource
derating code which are addressed as well"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Rework stale comment
clocksource: Consistent de-rate when marking unstable
x86/tsc: Fix mark_tsc_unstable()
clocksource: Initialize cs->wd_list
clocksource: Allow clocksource_mark_unstable() on unregistered clocksources
x86/tsc: Always unregister clocksource_tsc_early
Linus Torvalds [Sun, 6 May 2018 15:34:06 +0000 (05:34 -1000)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix to prevent false positives in the spurious interrupt
detector when more than a single demultiplex register is evaluated in
the Qualcom irq combiner driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom: Fix check for spurious interrupts
Linus Torvalds [Sun, 6 May 2018 03:30:58 +0000 (17:30 -1000)]
Merge tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86
Pull x86 platform driver fixes from Darren Hart:
- We missed a case in the Dell config dependencies resulting in a
possible bad configuration, resolve it by giving up on trying to keep
DELL_LAPTOP visible in the menu and make it depend on DELL_SMBIOS.
- Fix a null pointer dereference at module unload for the asus-wireless
driver.
* tag 'platform-drivers-x86-v4.17-2' of git://git.infradead.org/linux-platform-drivers-x86:
platform/x86: Kconfig: Fix dell-laptop dependency chain.
platform/x86: asus-wireless: Fix NULL pointer dereference
Linus Torvalds [Sun, 6 May 2018 03:28:08 +0000 (17:28 -1000)]
Merge tag 'usb-4.17-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes for 4.17-rc4.
The majority of them are some USB gadget fixes that missed my last
pull request. The "largest" patch in here is a fix for the old visor
driver that syzbot found 6 months or so ago and I finally remembered
to fix it.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: host: ehci: Use dma_pool_zalloc()"
usb: typec: tps6598x: handle block reads separately with plain-I2C adapters
usb: typec: tcpm: Release the role mux when exiting
USB: Accept bulk endpoints with 1024-byte maxpacket
xhci: Fix use-after-free in xhci_free_virt_device
USB: serial: visor: handle potential invalid device configuration
USB: serial: option: adding support for ublox R410M
usb: musb: trace: fix NULL pointer dereference in musb_g_tx()
usb: musb: host: fix potential NULL pointer dereference
usb: gadget: composite Allow for larger configuration descriptors
usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue
usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static
usb: dwc2: pci: Fix error return code in dwc2_pci_probe()
usb: dwc2: WA for Full speed ISOC IN in DDMA mode.
usb: dwc2: dwc2_vbus_supply_init: fix error check
usb: gadget: f_phonet: fix pn_net_xmit()'s return type
Anthoine Bourgeois [Sun, 29 Apr 2018 22:05:58 +0000 (22:05 +0000)]
KVM: x86: remove APIC Timer periodic/oneshot spikes
Since the commit "
8003c9ae204e: add APIC Timer periodic/oneshot mode VMX
preemption timer support", a Windows 10 guest has some erratic timer
spikes.
Here the results on a 150000 times 1ms timer without any load:
Before
8003c9ae204e | After
8003c9ae204e
Max 1834us | 86000us
Mean 1100us | 1021us
Deviation 59us | 149us
Here the results on a 150000 times 1ms timer with a cpu-z stress test:
Before
8003c9ae204e | After
8003c9ae204e
Max 32000us | 140000us
Mean 1006us | 1997us
Deviation 140us | 11095us
The root cause of the problem is starting hrtimer with an expiry time
already in the past can take more than 20 milliseconds to trigger the
timer function. It can be solved by forward such past timers
immediately, rather than submitting them to hrtimer_start().
In case the timer is periodic, update the target expiration and call
hrtimer_start with it.
v2: Check if the tsc deadline is already expired. Thank you Mika.
v3: Execute the past timers immediately rather than submitting them to
hrtimer_start().
v4: Rearm the periodic timer with advance_periodic_target_expiration() a
simpler version of set_target_expiration(). Thank you Paolo.
Cc: Mika Penttilä <mika.penttila@nextfour.com>
Cc: Wanpeng Li <kernellwp@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@blade-group.com>
8003c9ae204e ("KVM: LAPIC: add APIC Timer periodic/oneshot mode VMX preemption timer support")
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Radim Krčmář [Sat, 5 May 2018 21:05:31 +0000 (23:05 +0200)]
Merge tag 'kvmarm-fixes-for-4.17-2' of git://git./linux/kernel/git/kvmarm/kvmarm
KVM/arm fixes for 4.17, take #2
- Fix proxying of GICv2 CPU interface accesses
- Fix crash when switching to BE
- Track source vcpu git GICv2 SGIs
- Fix an outdated bit of documentation
Linus Torvalds [Sat, 5 May 2018 07:15:25 +0000 (21:15 -1000)]
Merge tag 'kbuild-fixes-v4.17' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- remove state comment in modpost
- extend MAINTAINERS entry to cover modpost and more makefiles
- fix missed building of SANCOV gcc-plugin
- replace left-over 'bison' with $(YACC)
- display short log when generating parer of genksyms
* tag 'kbuild-fixes-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
genksyms: fix typo in parse.tab.{c,h} generation rules
kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)
gcc-plugins: fix build condition of SANCOV plugin
MAINTAINERS: Update Kbuild entry with a few paths
modpost: delete stale comment
Linus Torvalds [Sat, 5 May 2018 07:12:06 +0000 (21:12 -1000)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux
Pull clk fixes froom Stephen Boyd:
"A handful of fixes for the stm32mp1 clk driver came in during the
merge window for the driver that got merged in the merge window.
Plus a warning fix for unused PM ops and a couple fixes for the meson
clk driver clk names that went unnoticed with the regmap rework.
There's also another fix in here for the mux rounding flag which
wasn't doing what it said it did, but now it does"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: meson: meson8b: fix meson8b_cpu_clk parent clock name
clk: meson: meson8b: fix meson8b_fclk_div3_div clock name
clk: meson: drop meson_aoclk_gate_regmap_ops
clk: meson: honor CLK_MUX_ROUND_CLOSEST in clk_regmap
clk: honor CLK_MUX_ROUND_CLOSEST in generic clk mux
clk: cs2000: mark resume function as __maybe_unused
clk: stm32mp1: remove ck_apb_dbg clock
clk: stm32mp1: set stgen_k clock as critical
clk: stm32mp1: add missing tzc2 clock
clk: stm32mp1: fix SAI3 & SAI4 clocks
clk: stm32mp1: remove unused dfsdm_src[] const
clk: stm32mp1: add missing static
Linus Torvalds [Sat, 5 May 2018 07:07:43 +0000 (21:07 -1000)]
Merge tag 'rproc-v4.17-1' of git://github.com/andersson/remoteproc
Pull remoteproc and rpmsg fixes from Bjorn Andersson:
- fix screw-up when reversing boolean for rproc_stop()
- add missing OF node refcounting dereferences
- add missing MODULE_ALIAS in rpmsg_char
* tag 'rproc-v4.17-1' of git://github.com/andersson/remoteproc:
rpmsg: added MODULE_ALIAS for rpmsg_char
remoteproc: qcom: Fix potential device node leaks
remoteproc: fix crashed parameter logic on stop call
Linus Torvalds [Sat, 5 May 2018 07:05:12 +0000 (21:05 -1000)]
Merge tag 'drm-fixes-for-v4.17-rc4' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"vmwgfx, i915, vc4, vga dac fixes.
This seems eerily quiet, so I expect it will explode next week or
something.
One i915 model firmware, two vmwgfx fixes, one vc4 fix and one bridge
leak fix"
* tag 'drm-fixes-for-v4.17-rc4' of git://people.freedesktop.org/~airlied/linux:
drm/bridge: vga-dac: Fix edid memory leak
drm/vc4: Make sure vc4_bo_{inc,dec}_usecnt() calls are balanced
drm/i915/glk: Add MODULE_FIRMWARE for Geminilake
drm/vmwgfx: Fix a buffer object leak
drm/vmwgfx: Clean up fbdev modeset locking
Linus Torvalds [Sat, 5 May 2018 06:57:28 +0000 (20:57 -1000)]
Merge tag 'trace-v4.17-rc1-3' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Some of the files in the tracing directory show file mode 0444 when
they are writable by root. To fix the confusion, they should be 0644.
Note, either case root can still write to them.
Zhengyuan asked why I never applied that patch (the first one is from
2014!). I simply forgot about it. /me lowers head in shame"
* tag 'trace-v4.17-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix the file mode of stack tracer
ftrace: Have set_graph_* files have normal file modes
Linus Torvalds [Sat, 5 May 2018 06:51:10 +0000 (20:51 -1000)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fixes from Doug Ledford:
"This is our first pull request of the rc cycle. It's not that it's
been overly quiet, we were just waiting on a few things before sending
this off.
For instance, the 6 patch series from Intel for the hfi1 driver had
actually been pulled in on Tuesday for a Wednesday pull request, only
to have Jason notice something I missed, so we held off for some
testing, and then on Thursday had to respin the series because the
very first patch needed a minor fix (unnecessary cast is all).
There is a sizable hns patch series in here, as well as a reasonably
largish hfi1 patch series, then all of the lines of uapi updates are
just the change to the new official Linux-OpenIB SPDX tag (a bunch of
our files had what amounts to a BSD-2-Clause + MIT Warranty statement
as their license as a result of the initial code submission years ago,
and the SPDX folks decided it was unique enough to warrant a unique
tag), then the typical mlx4 and mlx5 updates, and finally some cxgb4
and core/cache/cma updates to round out the bunch.
None of it was overly large by itself, but in the 2 1/2 weeks we've
been collecting patches, it has added up :-/.
As best I can tell, it's been through 0day (I got a notice about my
last for-next push, but not for my for-rc push, but Jason seems to
think that failure messages are prioritized and success messages not
so much). It's also been through linux-next. And yes, we did notice in
the context portion of the CMA query gid fix patch that there is a
dubious BUG_ON() in the code, and have plans to audit our BUG_ON usage
and remove it anywhere we can.
Summary:
- Various build fixes (USER_ACCESS=m and ADDR_TRANS turned off)
- SPDX license tag cleanups (new tag Linux-OpenIB)
- RoCE GID fixes related to default GIDs
- Various fixes to: cxgb4, uverbs, cma, iwpm, rxe, hns (big batch),
mlx4, mlx5, and hfi1 (medium batch)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (52 commits)
RDMA/cma: Do not query GID during QP state transition to RTR
IB/mlx4: Fix integer overflow when calculating optimal MTT size
IB/hfi1: Fix memory leak in exception path in get_irq_affinity()
IB/{hfi1, rdmavt}: Fix memory leak in hfi1_alloc_devdata() upon failure
IB/hfi1: Fix NULL pointer dereference when invalid num_vls is used
IB/hfi1: Fix loss of BECN with AHG
IB/hfi1 Use correct type for num_user_context
IB/hfi1: Fix handling of FECN marked multicast packet
IB/core: Make ib_mad_client_id atomic
iw_cxgb4: Atomically flush per QP HW CQEs
IB/uverbs: Fix kernel crash during MR deregistration flow
IB/uverbs: Prevent reregistration of DM_MR to regular MR
RDMA/mlx4: Add missed RSS hash inner header flag
RDMA/hns: Fix a couple misspellings
RDMA/hns: Submit bad wr
RDMA/hns: Update assignment method for owner field of send wqe
RDMA/hns: Adjust the order of cleanup hem table
RDMA/hns: Only assign dqpn if IB_QP_PATH_DEST_QPN bit is set
RDMA/hns: Remove some unnecessary attr_mask judgement
RDMA/hns: Only assign mtu if IB_QP_PATH_MTU bit is set
...
Linus Torvalds [Sat, 5 May 2018 06:41:44 +0000 (20:41 -1000)]
Merge tag 'for-linus-
20180504' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A collection of fixes that should to into this release. This contains:
- Set of bcache fixes from Coly, fixing regression in patches that
went into this series.
- Set of NVMe fixes by way of Keith.
- Set of bdi related fixes, one from Jan and two from Tetsuo Handa,
fixing various issues around device addition/removal.
- Two block inflight fixes from Omar, fixing issues around the
transition to using tags for blk-mq inflight accounting that we
did a few releases ago"
* tag 'for-linus-
20180504' of git://git.kernel.dk/linux-block:
bdi: Fix oops in wb_workfn()
nvmet: switch loopback target state to connecting when resetting
nvme/multipath: Fix multipath disabled naming collisions
nvme/multipath: Disable runtime writable enabling parameter
nvme: Set integrity flag for user passthrough commands
nvme: fix potential memory leak in option parsing
bdi: Fix use after free bug in debugfs_remove()
bdi: wake up concurrent wb_shutdown() callers.
bcache: use pr_info() to inform duplicated CACHE_SET_IO_DISABLE set
bcache: set dc->io_disable to true in conditional_stop_bcache_device()
bcache: add wait_for_kthread_stop() in bch_allocator_thread()
bcache: count backing device I/O error for writeback I/O
bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error()
bcache: store disk name in struct cache and struct cached_dev
blk-mq: fix sysfs inflight counter
blk-mq: count allocated but not started requests in iostats inflight
Linus Torvalds [Sat, 5 May 2018 06:36:50 +0000 (20:36 -1000)]
Merge tag 'xfs-4.17-fixes-2' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"I've got one more bug fix for xfs for 4.17-rc4, which caps the amount
of data we try to handle in one dedupe request so that userspace can't
livelock the kernel.
This series has been run through a full xfstests run during the week
and through a quick xfstests run against this morning's master, with
no ajor failures reported.
Summary:
- Cap the maximum length of a deduplication request at MAX_RW_COUNT/2
to avoid kernel livelock due to excessively large IO requests"
* tag 'xfs-4.17-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: cap the length of deduplication requests
Linus Torvalds [Sat, 5 May 2018 06:32:18 +0000 (20:32 -1000)]
Merge tag 'for-4.17-rc3-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two regression fixes and one fix for stable"
* tag 'for-4.17-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: send, fix missing truncate for inode with prealloc extent past eof
btrfs: Take trans lock before access running trans in check_delayed_ref
btrfs: Fix wrong first_key parameter in replace_path
Mauro Rossi [Tue, 24 Apr 2018 11:08:18 +0000 (20:08 +0900)]
genksyms: fix typo in parse.tab.{c,h} generation rules
'quet' is replaced by 'quiet' in scripts/genksyms/Makefile
Signed-off-by: Mauro Rossi <issor.oruam@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 24 Apr 2018 11:07:13 +0000 (20:07 +0900)]
kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)
Commit
73a4f6dbe70a ("kbuild: add LEX and YACC variables") missed to
update cmd_bison_h somehow.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 13 Apr 2018 05:06:10 +0000 (14:06 +0900)]
gcc-plugins: fix build condition of SANCOV plugin
Since commit
d677a4d60193 ("Makefile: support flag
-fsanitizer-coverage=trace-cmp"), you miss to build the SANCOV
plugin under some circumstances.
CONFIG_KCOV=y
CONFIG_KCOV_ENABLE_COMPARISONS=y
Your compiler does not support -fsanitize-coverage=trace-pc
Your compiler does not support -fsanitize-coverage=trace-cmp
Under this condition, $(CFLAGS_KCOV) is not empty but contains a
space, so the following ifeq-conditional is false.
ifeq ($(CFLAGS_KCOV),)
Then, scripts/Makefile.gcc-plugins misses to add sancov_plugin.so to
gcc-plugin-y while the SANCOV plugin is necessary as an alternative
means.
Fixes: d677a4d60193 ("Makefile: support flag -fsanitizer-coverage=trace-cmp")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kees Cook <keescook@chromium.org>
Rasmus Villemoes [Thu, 22 Mar 2018 20:58:27 +0000 (21:58 +0100)]
MAINTAINERS: Update Kbuild entry with a few paths
I managed to send some modpost patches to old addresses of both
Masahiro and Michal, and omitted linux-kbuild from cc, because my
tried and trusted scripts/get_maintainer wrapper failed me. Add the
modpost directory to the MAINTAINERS entry, and while at it make the
Makefile glob match scripts/Makefile itself, and add one matching the
Kbuild.include file as well.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Greg Kroah-Hartman [Fri, 4 May 2018 21:38:32 +0000 (14:38 -0700)]
Merge tag 'usb-serial-4.17-rc4' of https://git./linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.17-rc4
Here's a fix for a long-standing issue in the visor driver, which could
have security implications. Included is also a new modem device id.
Both commits have been in linux-next for a couple of days with no
reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
Greg Kroah-Hartman [Fri, 4 May 2018 21:35:12 +0000 (14:35 -0700)]
Revert "usb: host: ehci: Use dma_pool_zalloc()"
This reverts commit
22072e83ebd510fb6a090aef9d65ccfda9b1e7e4 as it is
broken.
Alan writes:
What you can't see just from reading the patch is that in both
cases (ehci->itd_pool and ehci->sitd_pool) there are two
allocation paths -- the two branches of an "if" statement -- and
only one of the paths calls dma_pool_[z]alloc. However, the
memset is needed for both paths, and so it can't be eliminated.
Given that it must be present, there's no advantage to calling
dma_pool_zalloc rather than dma_pool_alloc.
Reported-by: Erick Cafferata <erick@cafferata.me>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Fri, 20 Apr 2018 17:42:11 +0000 (12:42 -0500)]
platform/x86: Kconfig: Fix dell-laptop dependency chain.
As reported by Randy Dunlap:
>> WARNING: unmet direct dependencies detected for DELL_SMBIOS
>> Depends on [m]: X86 [=y] && X86_PLATFORM_DEVICES [=y]
>> && (DCDBAS [=m] ||
>> DCDBAS [=m]=n) && (ACPI_WMI [=n] || ACPI_WMI [=n]=n)
>> Selected by [y]:
>> - DELL_LAPTOP [=y] && X86 [=y] && X86_PLATFORM_DEVICES [=y]
>> && DMI [=y]
>> && BACKLIGHT_CLASS_DEVICE [=y] && (ACPI_VIDEO [=n] ||
>> ACPI_VIDEO [=n]=n)
>> && (RFKILL [=n] || RFKILL [=n]=n) && SERIO_I8042 [=y]
>>
Right now it's possible to set dell laptop to compile in but this
causes dell-smbios to compile in which breaks if dcdbas is a module.
Dell laptop shouldn't select dell-smbios anymore, but depend on it.
Fixes: 32d7b19bad96 (platform/x86: dell-smbios: Resolve dependency error on DCDBAS)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Cc: stable@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
João Paulo Rechi Vita [Thu, 19 Apr 2018 14:04:34 +0000 (07:04 -0700)]
platform/x86: asus-wireless: Fix NULL pointer dereference
When the module is removed the led workqueue is destroyed in the remove
callback, before the led device is unregistered from the led subsystem.
This leads to a NULL pointer derefence when the led device is
unregistered automatically later as part of the module removal cleanup.
Bellow is the backtrace showing the problem.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: __queue_work+0x8c/0x410
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
Modules linked in: ccm edac_mce_amd kvm_amd kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 joydev crypto_simd asus_nb_wmi glue_helper uvcvideo snd_hda_codec_conexant snd_hda_codec_generic snd_hda_codec_hdmi snd_hda_intel asus_wmi snd_hda_codec cryptd snd_hda_core sparse_keymap videobuf2_vmalloc arc4 videobuf2_memops snd_hwdep input_leds videobuf2_v4l2 ath9k psmouse videobuf2_core videodev ath9k_common snd_pcm ath9k_hw media fam15h_power ath k10temp snd_timer mac80211 i2c_piix4 r8169 mii mac_hid cfg80211 asus_wireless(-) snd soundcore wmi shpchp 8250_dw ip_tables x_tables amdkfd amd_iommu_v2 amdgpu radeon chash i2c_algo_bit drm_kms_helper syscopyarea serio_raw sysfillrect sysimgblt fb_sys_fops ahci ttm libahci drm video
CPU: 3 PID: 2177 Comm: rmmod Not tainted 4.15.0-5-generic #6+dev94.b4287e5bem1-Endless
Hardware name: ASUSTeK COMPUTER INC. X555DG/X555DG, BIOS 5.011 05/05/2015
RIP: 0010:__queue_work+0x8c/0x410
RSP: 0018:
ffffbe8cc249fcd8 EFLAGS:
00010086
RAX:
ffff992ac6810800 RBX:
0000000000000000 RCX:
0000000000000008
RDX:
0000000000000000 RSI:
0000000000000008 RDI:
ffff992ac6400e18
RBP:
ffffbe8cc249fd18 R08:
ffff992ac6400db0 R09:
0000000000000000
R10:
0000000000000040 R11:
ffff992ac6400dd8 R12:
0000000000002000
R13:
ffff992abd762e00 R14:
ffff992abd763e38 R15:
000000000001ebe0
FS:
00007f318203e700(0000) GS:
ffff992aced80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
00000001c720e000 CR4:
00000000001406e0
Call Trace:
queue_work_on+0x38/0x40
led_state_set+0x2c/0x40 [asus_wireless]
led_set_brightness_nopm+0x14/0x40
led_set_brightness+0x37/0x60
led_trigger_set+0xfc/0x1d0
led_classdev_unregister+0x32/0xd0
devm_led_classdev_release+0x11/0x20
release_nodes+0x109/0x1f0
devres_release_all+0x3c/0x50
device_release_driver_internal+0x16d/0x220
driver_detach+0x3f/0x80
bus_remove_driver+0x55/0xd0
driver_unregister+0x2c/0x40
acpi_bus_unregister_driver+0x15/0x20
asus_wireless_driver_exit+0x10/0xb7c [asus_wireless]
SyS_delete_module+0x1da/0x2b0
entry_SYSCALL_64_fastpath+0x24/0x87
RIP: 0033:0x7f3181b65fd7
RSP: 002b:
00007ffe74bcbe18 EFLAGS:
00000206 ORIG_RAX:
00000000000000b0
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f3181b65fd7
RDX:
000000000000000a RSI:
0000000000000800 RDI:
0000555ea2559258
RBP:
0000555ea25591f0 R08:
00007ffe74bcad91 R09:
000000000000000a
R10:
0000000000000000 R11:
0000000000000206 R12:
0000000000000003
R13:
00007ffe74bcae00 R14:
0000000000000000 R15:
0000555ea25591f0
Code: 01 00 00 02 0f 85 7d 01 00 00 48 63 45 d4 48 c7 c6 00 f4 fa 87 49 8b 9d 08 01 00 00 48 03 1c c6 4c 89 f7 e8 87 fb ff ff 48 85 c0 <48> 8b 3b 0f 84 c5 01 00 00 48 39 f8 0f 84 bc 01 00 00 48 89 c7
RIP: __queue_work+0x8c/0x410 RSP:
ffffbe8cc249fcd8
CR2:
0000000000000000
---[ end trace
7aa4f4a232e9c39c ]---
Unregistering the led device on the remove callback before destroying the
workqueue avoids this problem.
https://bugzilla.kernel.org/show_bug.cgi?id=196097
Reported-by: Dun Hum <bitter.taste@gmx.com>
Cc: stable@vger.kernel.org
Signed-off-by: João Paulo Rechi Vita <jprvita@endlessm.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Linus Torvalds [Fri, 4 May 2018 15:47:21 +0000 (05:47 -1000)]
Merge tag 'for-linus-4.17-rc4-tag' of git://git./linux/kernel/git/xen/tip
Pull xen cleanup from Juergen Gross:
"One cleanup to remove VLAs from the kernel"
* tag 'for-linus-4.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: Remove use of VLAs
James Morse [Fri, 4 May 2018 15:19:24 +0000 (16:19 +0100)]
arm64: vgic-v2: Fix proxying of cpuif access
Proxying the cpuif accesses at EL2 makes use of vcpu_data_guest_to_host
and co, which check the endianness, which call into vcpu_read_sys_reg...
which isn't mapped at EL2 (it was inlined before, and got moved OoL
with the VHE optimizations).
The result is of course a nice panic. Let's add some specialized
cruft to keep the broken platforms that require this hack alive.
But, this code used vcpu_data_guest_to_host(), which expected us to
write the value to host memory, instead we have trapped the guest's
read or write to an mmio-device, and are about to replay it using the
host's readl()/writel() which also perform swabbing based on the host
endianness. This goes wrong when both host and guest are big-endian,
as readl()/writel() will undo the guest's swabbing, causing the
big-endian value to be written to device-memory.
What needs doing?
A big-endian guest will have pre-swabbed data before storing, undo this.
If its necessary for the host, writel() will re-swab it.
For a read a big-endian guest expects to swab the data after the load.
The hosts's readl() will correct for host endianness, giving us the
device-memory's value in the register. For a big-endian guest, swab it
as if we'd only done the load.
For a little-endian guest, nothing needs doing as readl()/writel() leave
the correct device-memory value in registers.
Tested on Juno with that rarest of things: a big-endian 64K host.
Based on a patch from Marc Zyngier.
Reported-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Fixes: bf8feb39642b ("arm64: KVM: vgic-v2: Add GICV access from HYP")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Valentin Schneider [Wed, 2 May 2018 10:53:03 +0000 (11:53 +0100)]
KVM: arm/arm64: vgic_init: Cleanup reference to process_maintenance
One comment still mentioned process_maintenance operations after
commit
af0614991ab6 ("KVM: arm/arm64: vgic: Get rid of unnecessary
process_maintenance operation")
Update the comment to point to vgic_fold_lr_state instead, which
is where maintenance interrupts are taken care of.
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
James Morse [Wed, 2 May 2018 11:17:02 +0000 (12:17 +0100)]
KVM: arm64: Fix order of vcpu_write_sys_reg() arguments
A typo in kvm_vcpu_set_be()'s call:
| vcpu_write_sys_reg(vcpu, SCTLR_EL1, sctlr)
causes us to use the 32bit register value as an index into the sys_reg[]
array, and sail off the end of the linear map when we try to bring up
big-endian secondaries.
| Unable to handle kernel paging request at virtual address
ffff80098b982c00
| Mem abort info:
| ESR = 0x96000045
| Exception class = DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| Data abort info:
| ISV = 0, ISS = 0x00000045
| CM = 0, WnR = 1
| swapper pgtable: 4k pages, 48-bit VAs, pgdp =
000000002ea0571a
| [
ffff80098b982c00] pgd=
00000009ffff8803, pud=
0000000000000000
| Internal error: Oops:
96000045 [#1] PREEMPT SMP
| Modules linked in:
| CPU: 2 PID: 1561 Comm: kvm-vcpu-0 Not tainted
4.17.0-rc3-00001-ga912e2261ca6-dirty #1323
| Hardware name: ARM Juno development board (r1) (DT)
| pstate:
60000005 (nZCv daif -PAN -UAO)
| pc : vcpu_write_sys_reg+0x50/0x134
| lr : vcpu_write_sys_reg+0x50/0x134
| Process kvm-vcpu-0 (pid: 1561, stack limit = 0x000000006df4728b)
| Call trace:
| vcpu_write_sys_reg+0x50/0x134
| kvm_psci_vcpu_on+0x14c/0x150
| kvm_psci_0_2_call+0x244/0x2a4
| kvm_hvc_call_handler+0x1cc/0x258
| handle_hvc+0x20/0x3c
| handle_exit+0x130/0x1ec
| kvm_arch_vcpu_ioctl_run+0x340/0x614
| kvm_vcpu_ioctl+0x4d0/0x840
| do_vfs_ioctl+0xc8/0x8d0
| ksys_ioctl+0x78/0xa8
| sys_ioctl+0xc/0x18
| el0_svc_naked+0x30/0x34
| Code:
73620291 604d00b0 00201891 1ab10194 (
957a33f8)
|---[ end trace
4b4a4f9628596602 ]---
Fix the order of the arguments.
Fixes: 8d404c4c24613 ("KVM: arm64: Rewrite system register accessors to read/write functions")
CC: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Linus Torvalds [Fri, 4 May 2018 15:44:50 +0000 (05:44 -1000)]
Merge tag 'pm-4.17-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"This fixes a regression from the 4.14 cycle in the CPPC cpufreq driver
causing it to use an incorrect transition delay value which leads to a
very high rate of frequency change requests when the schedutil
governor is in use (Prashanth Prakash)"
* tag 'pm-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq / CPPC: Set platform specific transition_delay_us
Linus Torvalds [Fri, 4 May 2018 15:43:33 +0000 (05:43 -1000)]
Merge tag 'acpi-4.17-rc4' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This fixes an ACPICA utilities (acpidump) build regression from the
4.16 cycle by setting LD in the CFLAGS passed to the linker to $(CC)
again (Jiri Slaby)"
* tag 'acpi-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools: power/acpi, revert to LD = gcc
Linus Torvalds [Fri, 4 May 2018 15:38:51 +0000 (05:38 -1000)]
Merge tag 'media/v4.17-4' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- a trivial one-line fix addressing a PTR_ERR() getting value from a
wrong var at imx driver
- a patch changing my e-mail at the Kernel tree to mchehab@kernel.org.
no code changes
* tag 'media/v4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
MAINTAINERS & files: Canonize the e-mails I use at files
media: imx-media-csi: Fix inconsistent IS_ERR and PTR_ERR
Linus Torvalds [Fri, 4 May 2018 15:37:22 +0000 (05:37 -1000)]
Merge tag 'sound-4.17-rc4' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, all deserved for stable.
Two are about core API fixes for the bugs that were triggered by
ever-growing fuzzers, while others are driver-specific fixes"
* tag 'sound-4.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: Check PCM state at xfern compat ioctl
ALSA: aloop: Add missing cable lock to ctl API callbacks
ALSA: dice: fix kernel NULL pointer dereference due to invalid calculation for array index
ALSA: seq: Fix races at MIDI encoding in snd_virmidi_output_trigger()
ALSA: hda - Fix incorrect usage of IS_REACHABLE()
Kees Cook [Wed, 11 Apr 2018 04:43:15 +0000 (21:43 -0700)]
dm mirror: remove VLA usage
On the quest to remove all VLAs from the kernel[1], this avoids VLAs
in dm-raid1.c by just using the maximum size for the stack arrays.
The nr_mirrors value was already capped at 9, so this makes it a trivial
adjustment to the array sizes.
[1] https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Mauro Carvalho Chehab [Wed, 25 Apr 2018 09:34:48 +0000 (05:34 -0400)]
MAINTAINERS & files: Canonize the e-mails I use at files
From now on, I'll start using my @kernel.org as my development e-mail.
As such, let's remove the entries that point to the old
mchehab@s-opensource.com at MAINTAINERS file.
For the files written with a copyright with mchehab@s-opensource,
let's keep Samsung on their names, using mchehab+samsung@kernel.org,
in order to keep pointing to my employer, with sponsors the work.
For the files written before I join Samsung (on July, 4 2013),
let's just use mchehab@kernel.org.
For bug reports, we can simply point to just kernel.org, as
this will reach my mchehab+samsung inbox anyway.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Brian Warner <brian.warner@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
From: Gustavo A. R. Silva [Mon, 16 Apr 2018 17:28:56 +0000 (13:28 -0400)]
media: imx-media-csi: Fix inconsistent IS_ERR and PTR_ERR
Fix inconsistent IS_ERR and PTR_ERR in imx_csi_probe.
The proper pointer to be passed as argument is pinctrl
instead of priv->vdev.
This issue was detected with the help of Coccinelle.
Fixes: 52e17089d185 ("media: imx: Don't initialize vars that won't be used")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Jiri Slaby [Tue, 24 Apr 2018 07:43:44 +0000 (09:43 +0200)]
tools: power/acpi, revert to LD = gcc
Commit
7ed1c1901fe5 (tools: fix cross-compile var clobbering) removed
setting of LD to $(CROSS_COMPILE)gcc. This broke build of acpica
(acpidump) in power/acpi:
ld: unrecognized option '-D_LINUX'
The tools pass CFLAGS to the linker (incl. -D_LINUX), so revert this
particular change and let LD be $(CC) again. Note that the old behaviour
was a bit different, it used $(CROSS_COMPILE)gcc which was eliminated by
the commit
7ed1c1901fe5. We use $(CC) for that reason.
Fixes: 7ed1c1901fe5 (tools: fix cross-compile var clobbering)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Miquel Raynal [Thu, 3 May 2018 10:00:27 +0000 (12:00 +0200)]
mtd: rawnand: marvell: fix command xtype in BCH write hook
One layout supported by the Marvell NAND controller supports NAND pages
of 2048 bytes, all handled in one single chunk when using BCH with a
strength of 4-bit per 512 bytes. In this case, instead of the generic
XTYPE_WRITE_DISPATCH/XTYPE_LAST_NAKED_RW couple, the controller expects
to receive XTYPE_MONOLITHIC_RW.
This fixes problems at boot like:
[ 1.315475] Scanning device for bad blocks
[ 3.203108] marvell-nfc
f10d0000.flash: Timeout waiting for RB signal
[ 3.209564] nand_bbt: error while writing BBT block -110
[ 4.243106] marvell-nfc
f10d0000.flash: Timeout waiting for RB signal
[ 5.283106] marvell-nfc
f10d0000.flash: Timeout waiting for RB signal
[ 5.289562] nand_bbt: error -110 while marking block 2047 bad
[ 6.323106] marvell-nfc
f10d0000.flash: Timeout waiting for RB signal
[ 6.329559] nand_bbt: error while writing BBT block -110
[ 7.363106] marvell-nfc
f10d0000.flash: Timeout waiting for RB signal
[ 8.403105] marvell-nfc
f10d0000.flash: Timeout waiting for RB signal
[ 8.409559] nand_bbt: error -110 while marking block 2046 bad
...
Fixes: 02f26ecf8c772 ("mtd: nand: add reworked Marvell NAND controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Chris Packham [Thu, 3 May 2018 02:21:28 +0000 (14:21 +1200)]
mtd: rawnand: marvell: pass ms delay to wait_op
marvell_nfc_wait_op() expects the delay to be expressed in milliseconds
but nand_sdr_timings uses picoseconds. Use PSEC_TO_MSEC when passing
tPROG_max to marvell_nfc_wait_op().
Fixes: 02f26ecf8c772 ("mtd: nand: add reworked Marvell NAND controller driver")
Cc: stable@vger.kernel.org
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
git.samba.org / sfrench / cifs-2.6.git / log