sfrench/cifs-2.6.git
10 months agoMerge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next
Dave Airlie [Thu, 31 Jan 2019 23:51:23 +0000 (09:51 +1000)]
Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into drm-next

This pull includes the new Arm "komeda" DRM driver. It is currently hosted
in the same repo as the other "mali-dp" driver because it is the next
iteration of the IP.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Liviu Dudau <Liviu.Dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190131173600.GN25147@e110455-lin.cambridge.arm.com
10 months agoMerge tag 'drm-intel-next-2019-01-24' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Thu, 31 Jan 2019 23:34:49 +0000 (09:34 +1000)]
Merge tag 'drm-intel-next-2019-01-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Track all runtime-PM wakerefs and other rpm improvements (Chris)
- Fix ILK-IVB primary plane enable delays (Juha-Pekka)
- Differentiate between gtt->mutex and ppgtt->mutex (Chris)
- Prevent concurrent GGTT update and use on Braswell (Chris)
- Fix CNL macros for DDI vswing (Aditya)
- Fix static code analysis warning (RK)
- Only dump GPU state on set-wedged if interesting (Chris)
- Port F detection improvements (Imre)
- userptr mutex lock fixes (Chris)
- Fix on MST allocation by propagating error value at compute_config (Lyude)
- Serialise concurrent calls to set_wedge (Chris)
- Unify reset functionality into i915_reset.c (Chris)
- Switch to kernel fixed size types (Jani)
- Limit the for_each_set_bit to the valid range (Chris)
- Fix wakeref cooie handling (Tvrtko)
- IRQs handling improvements (Chris)
- Selftests improvements (Chris)
- Remove superfluous PANEL_POWER_OFF macro (Jani)
- Global seqno fix (Chris)
- DSI fixes (Hans)
- Refactor out intel_context_init() (Chris)
- Show all active engines on hangcheck (Chris)
- PSR2 fixes and improvements (Jose)
- Do a posting read after irq install on Ice Lake (Daniele)
- Add few more device IDs for Ice Lake (Rodrigo)
- Mark up priority boost on preemption (Chris)
- Add color management LUT validation helper (Matt)
- Split out intel_crt_present to platform specific setup (Jani)
- LVDS and TV clean up and improvements (Jani)
- Simplify CRT VBT check for per-VLV/DDI (Jani)
- De-inline intel_context_init() (Chris)
- Backlight fixes (Maarten)
- Enable fastset for non-boot modesets (Maarten)
- Make HW readout mark CRTC scaler as in use (Maarten)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190128181000.GA5284@intel.com
10 months agoMerge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Thu, 31 Jan 2019 04:19:45 +0000 (14:19 +1000)]
Merge branch 'drm-next-5.1' of git://people.freedesktop.org/~agd5f/linux into drm-next

New stuff for 5.1.
amdgpu:
- DC bandwidth formula updates
- Support for DCC on scanout surfaces
- Support for multiple IH rings on soc15 asics
- Fix xgmi locking
- Add sysfs interface to get pcie usage stats
- Simplify DC i2c/aux code
- Initial support for BACO on vega10/20
- New runtime SMU feature debug interface
- Expand existing sysfs power interfaces to new clock domains
- Handle kexec properly
- Simplify IH programming
- Rework doorbell handling across asics
- Drop old CI DPM implementation
- DC page flipping fixes
- Misc SR-IOV fixes

amdkfd:
- Simplify the interfaces between amdkfd and amdgpu

ttm:
- Add a callback to notify the driver when the lru changes

sched:
- Refactor mirror list handling
- Rework hw fence processing

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190125231517.26268-1-alexander.deucher@amd.com
10 months agodrm/komeda: Off by one in komeda_fb_get_pixel_addr()
Dan Carpenter [Wed, 23 Jan 2019 09:37:55 +0000 (12:37 +0300)]
drm/komeda: Off by one in komeda_fb_get_pixel_addr()

The > should be >= to avoid an off by one bug.

Fixes: c46c24bb6b11 ("drm/komeda: Add komeda_framebuffer")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: James Qian Wang (Arm Technology China) <james.qian.wang@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
10 months agodrm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined...
ndesaulniers@google.com [Fri, 25 Jan 2019 00:52:59 +0000 (16:52 -0800)]
drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines

arch/x86/Makefile disables SSE and SSE2 for the whole kernel.  The
AMDGPU drivers modified in this patch re-enable SSE but not SSE2.  Turn
on SSE2 to support emitting double precision floating point instructions
rather than calls to non-existent (usually available from gcc_s or
compiler_rt) floating point helper routines.

Link: https://gcc.gnu.org/onlinedocs/gccint/Soft-float-library-routines.html
Link: https://github.com/ClangBuiltLinux/linux/issues/327
Cc: stable@vger.kernel.org # 4.19
Reported-by: S, Shirish <Shirish.S@amd.com>
Reported-by: Matthias Kaehlcke <mka@google.com>
Suggested-by: James Y Knight <jyknight@google.com>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: support Vega12 retrieving and setting ppfeatures
Evan Quan [Fri, 25 Jan 2019 06:15:10 +0000 (14:15 +0800)]
drm/amd/powerplay: support Vega12 retrieving and setting ppfeatures

Enable retrieving and setting ppfeatures on Vega12.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: support Vega12 SOCclk and DCEFclk dpm level settings
Evan Quan [Fri, 25 Jan 2019 06:12:40 +0000 (14:12 +0800)]
drm/amd/powerplay: support Vega12 SOCclk and DCEFclk dpm level settings

Enable SOCclk and DCEFclk dpm level retrieving and setting on Vega12.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: support Vega10 retrieving and setting ppfeatures
Evan Quan [Fri, 25 Jan 2019 06:11:31 +0000 (14:11 +0800)]
drm/amd/powerplay: support Vega10 retrieving and setting ppfeatures

Enable retrieving and setting ppfeatures on Vega10.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: support Vega10 SOCclk and DCEFclk dpm level settings
Evan Quan [Fri, 25 Jan 2019 06:09:40 +0000 (14:09 +0800)]
drm/amd/powerplay: support Vega10 SOCclk and DCEFclk dpm level settings

Enable SOCclk and DCEFclk dpm level retrieving and setting on Vega10.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: avoid frequent metrics table export
Evan Quan [Thu, 24 Jan 2019 09:55:39 +0000 (17:55 +0800)]
drm/amd/powerplay: avoid frequent metrics table export

That's unnecessary. Also it makes more sense to show all the clocks
on one metrics table export.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: correct Vega20 gfxclk readout under DS
Evan Quan [Thu, 24 Jan 2019 09:50:39 +0000 (17:50 +0800)]
drm/amd/powerplay: correct Vega20 gfxclk readout under DS

Current implementation cannot report the correct gfxclk under DS.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Connect dig_fe to otg directly instead of calling bios
hersen wu [Fri, 11 Jan 2019 17:43:20 +0000 (12:43 -0500)]
drm/amd/display: Connect dig_fe to otg directly instead of calling bios

[Why] After call bios table crtc_source_select, dal will program fmt
again. The bios table program dig_source_select and other fmt register
for bios usage which is redundancy and uncessary.

[How] Program dig_soruce_select register directly

Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: 3.2.15
Steven Chiu [Fri, 11 Jan 2019 21:55:54 +0000 (16:55 -0500)]
drm/amd/display: 3.2.15

Signed-off-by: Steven Chiu <steven.chiu@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: take dpms_off into account for edp turn off logic
Eric Yang [Fri, 11 Jan 2019 22:09:18 +0000 (17:09 -0500)]
drm/amd/display: take dpms_off into account for edp turn off logic

[why]
Previously we incorrectly skipped backlight control when stream is
present but dpms_off = true. This causes backlight to remain on in
the we boot up or resume into a external display only configuration
where VBIOS posted on the eDP.

[How]
Add dpms_off into the condition for edp need to turn off.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agorevert "drm/amd/display: Add condition to sync eDP SW status and HW status"
Eric Yang [Fri, 11 Jan 2019 21:54:05 +0000 (16:54 -0500)]
revert "drm/amd/display: Add condition to sync eDP SW status and HW status"

[Why]
This change causes regression for S4 resume where gamma is not
programmed. The change incorrectly updates the requested dpms_off
state.

This reverts commit d2b1d6bbc56afab8ebae9d52d7ca0ea3569bd600.

Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Adjust ABM 2.2 contrast parameters
Josip Pavic [Thu, 10 Jan 2019 20:23:07 +0000 (15:23 -0500)]
drm/amd/display: Adjust ABM 2.2 contrast parameters

[Why]
Improved contrast in ABM 2.2 is desired

[How]
Increase the contrast factor for ABM levels 2, 3 and 4

Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Default to linear output gamma
Krunoslav Kovac [Tue, 8 Jan 2019 23:32:34 +0000 (18:32 -0500)]
drm/amd/display: Default to linear output gamma

[Why] Our output TF calculation doesn't work if no user-specified gamma
correction. Normally, user provides this, but driver sohuld just assume
default (linear) gamma otherwise.

[How] Remove output TF dependency on user gamma being provided.

Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Sivapiriyan Kumarasamy <Sivapiriyan.Kumarasamy@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Fix use of uninitialized union
John Barberiz [Tue, 8 Jan 2019 22:43:08 +0000 (17:43 -0500)]
drm/amd/display: Fix use of uninitialized union

[Why]
An uninitialized variable would randomly initialize to a large
value. This caused enough delay to fail DP Compliance Test 400.2.1.

[How]
Initialize the variable.

Signed-off-by: John Barberiz <John.Barberiz@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Create switching mechanism for ABM 2.2
Josip Pavic [Tue, 8 Jan 2019 19:46:05 +0000 (14:46 -0500)]
drm/amd/display: Create switching mechanism for ABM 2.2

[Why]
Need method of detecting which version of the DMCU FW is loaded and
load the appropriate iRAM.

[How]
Create definition for ABM 2.2 iRAM, and load it if the DMCU FW version
number matches the ABM 2.2 version; otherwise load ABM 2.1 iRAM.

Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Update DMCU versioning mechanism
Josip Pavic [Tue, 8 Jan 2019 19:43:10 +0000 (14:43 -0500)]
drm/amd/display: Update DMCU versioning mechanism

[Why]
Current date based versioning doesn't tell us about feature version
and build version, and is not useful for debug.

[How]
Add versioning based on feature and build

Signed-off-by: Josip Pavic <Josip.Pavic@amd.com>
Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Know what a pageflip is
David Francis [Wed, 12 Dec 2018 19:11:53 +0000 (14:11 -0500)]
drm/amd/display: Know what a pageflip is

[Why]
We were assuming that any commit with allow_modeset == false
was a pageflip.  This was against drm intention and only
worked by sheer luck

[How]
A pageflip is the change from one framebuffer to another

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Perform plane updates only when needed
David Francis [Wed, 19 Dec 2018 15:45:16 +0000 (10:45 -0500)]
drm/amd/display: Perform plane updates only when needed

[Why]
Our old logic: if pageflip, update freesync and plane address.
Otherwise, update everything.
This over-updated on non-pageflip cases, and it failed to
update if pageflip and non-pageflip changes occurred on
the same commit

[How]
Update flip_addrs on pageflips.
Update scaling_info when it changes.
Update color fields on color changes.
Updates plane_info always because we don't have a good way of
knowing when it needs to be updated.

Unfortunately, this means that every stream commit involves two
calls into DC.  In particular, on pageflips there is a second,
pointless update that changes nothing but costs several
microseconds (about a 50% increase in time taken). The update is
fast, but there are comparisons and some useless programming.

Leave TODOs indicating dissatisfaction.

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Call into DC once per multiplane flip
David Francis [Tue, 11 Dec 2018 20:17:15 +0000 (15:17 -0500)]
drm/amd/display: Call into DC once per multiplane flip

[Why]
amdgpu_dm_commit_planes was performing multi-plane
flips incorrectly:

It waited for vblank once per flipped plane

It prepared flip ISR and acquired the corresponding vblank ref
once per plane, although it closed ISR and put the ref once
per crtc

It called into dc once per flipped plane, duplicating some work

[How]
Wait for vblank, get vblank ref, prepare flip ISR, and call into
DC only once, and only if there is a pageflip

Make freesync continue to update planes even if vrr information
has already been changed

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Simplify underscan and ABM commit
David Francis [Tue, 18 Dec 2018 20:30:19 +0000 (15:30 -0500)]
drm/amd/display: Simplify underscan and ABM commit

[Why]
Underscan and ABM are connector properties but require updates
to DC stream state.  Previously, on updates to these properties
the affected stream and all its planes were committed.
This is unnecessary; only a few fields on the stream need
to be changed.

[How]
If scaling or ABM have changed, change the stream and
create a stream update with those changes.  Call
DC with only those fields.

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Let updates with no scaling changes be fast
David Francis [Thu, 3 Jan 2019 19:38:06 +0000 (14:38 -0500)]
drm/amd/display: Let updates with no scaling changes be fast

[Why]
DC was assuming that any surface_update->scaling_info
meant the update was at least medium.  However, if nothing
has changed there is no scaling to program, so there is
no problem with the update being fast

[How]
If every update flag is not set, the update is fast

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Introduce DC VM interface
Eryk Brol [Fri, 7 Dec 2018 15:25:13 +0000 (10:25 -0500)]
drm/amd/display: Introduce DC VM interface

Virtual memory allows display to support flipping to surfaces which
are not allocated contiguously in memory with physical addresses,
instead a 1-4 level page table is used.

This is beneficial because it allows the scattering of large surfaces
to improve memory efficiency and security.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Restructure DCN10 hubbub
Eryk Brol [Fri, 4 Jan 2019 15:29:00 +0000 (10:29 -0500)]
drm/amd/display: Restructure DCN10 hubbub

[Why]
Change DCN10 hubbub to use hubbub as a base and allow all future DCN
hubbubs to do the same instead of using DCN10_hubbub. This increases
readability and doesn't require future hubbubs to inherit anything
other than the base hubbub struct.

[How]
Create separate DCN10_hubbub struct which uses the hubbub struct as
a base.

Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: fix eDP fast bootup for pre-raven asic
hersen wu [Fri, 11 Jan 2019 15:39:30 +0000 (10:39 -0500)]
drm/amd/display: fix eDP fast bootup for pre-raven asic

[Why]
For fastboot, Bios will light up eDP before SW driver is loaded. SW
driver will check if eDP is lit by bios through reading the
BIOS_SCRATCH_3 register. If lit, SW driver will not power down eDP
power and phy to save time.

Definition of BIOS_SCRATCH_3 are missing for pre-raven asic. This
causes eDP fast boot to not work property. For some eDP panels, even
if dp tx sends NoVideoStream_flag =1 and dpcd 0x600=2, eDP rx may not
handle properly. This may cause a short flash on screen.

[How] Add definition of BIOS_SCRATCH_3 for all asic

Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Acked-by: Yongqiang Sun <yongqiang.sun@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/sched: Rework HW fence processing.
Andrey Grodzovsky [Wed, 5 Dec 2018 19:21:28 +0000 (14:21 -0500)]
drm/sched: Rework HW fence processing.

Expedite job deletion from ring mirror list to the HW fence signal
callback instead from finish_work, together with waiting for all
such fences to signal in drm_sched_stop we garantee that
already signaled job will not be processed twice.
Remove the sched finish fence callback and just submit finish_work
directly from the HW fence callback.

v2: Fix comments.
v3: Attach  hw fence cb to sched_job
v5: Rebase

Suggested-by: Christian Koenig <Christian.Koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/sched: Refactor ring mirror list handling.
Andrey Grodzovsky [Tue, 4 Dec 2018 21:56:14 +0000 (16:56 -0500)]
drm/sched: Refactor ring mirror list handling.

Decauple sched threads stop and start and ring mirror
list handling from the policy of what to do about the
guilty jobs.
When stoppping the sched thread and detaching sched fences
from non signaled HW fenes wait for all signaled HW fences
to complete before rerunning the jobs.

v2: Fix resubmission of guilty job into HW after refactoring.

v4:
Full restart for all the jobs, not only from guilty ring.
Extract karma increase into standalone function.

v5:
Rework waiting for signaled jobs without relying on the job
struct itself as those might already be freed for non 'guilty'
job's schedulers.
Expose karma increase to drivers.

v6:
Use list_for_each_entry_safe_continue and drm_sched_process_job
in case fence already signaled.
Call drm_sched_increase_karma only once for amdgpu and add documentation.

v7:
Wait only for the latest job's fence.

Suggested-by: Christian Koenig <Christian.Koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: enable MGPU fan boost feature on Vega10
Evan Quan [Tue, 22 Jan 2019 10:05:54 +0000 (18:05 +0800)]
drm/amd/powerplay: enable MGPU fan boost feature on Vega10

For those SKUs which support this feature only.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: support Vega10 fan table V3
Evan Quan [Tue, 22 Jan 2019 09:54:22 +0000 (17:54 +0800)]
drm/amd/powerplay: support Vega10 fan table V3

MGPU fan boost related parameter is added.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: remove old CI DPM implementation
Alex Deucher [Wed, 16 Jan 2019 16:55:04 +0000 (11:55 -0500)]
drm/amdgpu: remove old CI DPM implementation

The power smu7 powerplay code is much more robust and has
been the default for a while now.  Remove the old code.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/radeon: check if device is root before getting pci speed caps
Alex Deucher [Tue, 15 Jan 2019 17:05:16 +0000 (12:05 -0500)]
drm/radeon: check if device is root before getting pci speed caps

Check if the device is root rather before attempting to see what
speeds the pcie port supports.  Fixes a crash with pci passthrough
in a VM.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=109366
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: Add missing power attribute to APU check
Alex Deucher [Thu, 10 Jan 2019 03:19:28 +0000 (22:19 -0500)]
drm/amdgpu: Add missing power attribute to APU check

Add missing power_average to visible check for power
attributes for APUs.  Was missed before.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: change the max clock level to 16
Evan Quan [Mon, 21 Jan 2019 09:57:29 +0000 (17:57 +0800)]
drm/amd/display: change the max clock level to 16

As the gfxclk for SMU11 can have at most 16 discrete levels.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: run btc before enabling all SMU features
Evan Quan [Mon, 21 Jan 2019 06:39:26 +0000 (14:39 +0800)]
drm/amd/powerplay: run btc before enabling all SMU features

BTC is needed before enabling all SMU features.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: fit the SOC clock also to the new performance level
Evan Quan [Mon, 21 Jan 2019 06:05:37 +0000 (14:05 +0800)]
drm/amd/powerplay: fit the SOC clock also to the new performance level

The SOC clock needs also to fit the new performance level.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: enforce display related settings only on needed
Evan Quan [Thu, 17 Jan 2019 09:52:41 +0000 (17:52 +0800)]
drm/amd/powerplay: enforce display related settings only on needed

No display related settings are needed on dpm level change.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: avoid unnecessary dpm level setting
Evan Quan [Thu, 17 Jan 2019 09:48:30 +0000 (17:48 +0800)]
drm/amd/powerplay: avoid unnecessary dpm level setting

No dpm level setting is needed when the request level
is actually same as current.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: add flags to emit_ib interface v2
Jack Xiao [Fri, 18 Jan 2019 10:13:36 +0000 (18:13 +0800)]
drm/amdgpu: add flags to emit_ib interface v2

Replace the last bool type parameter with a general flags parameter,
to make the last parameter be able to contain more information.

v2: drop setting need_ctx_switch = false

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: OD setting fix on Vega10
Kenneth Feng [Fri, 18 Jan 2019 10:08:19 +0000 (18:08 +0800)]
drm/amd/powerplay: OD setting fix on Vega10

gfxclk for OD setting is limited to 1980M for non-acg
ASICs of Vega10

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: sriov should skip asic_reset in device_init
wentalou [Thu, 17 Jan 2019 09:38:33 +0000 (17:38 +0800)]
drm/amdgpu: sriov should skip asic_reset in device_init

sriov would meet guest driver load failure,
if calling amdgpu_asic_reset in amdgpu_device_init.
sriov should skip asic_reset in device_init.

Signed-off-by: Wentao Lou <Wentao.Lou@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: Add APTX quirk for Lenovo laptop
Alex Deucher [Tue, 15 Jan 2019 17:09:09 +0000 (12:09 -0500)]
drm/amdgpu: Add APTX quirk for Lenovo laptop

Needs ATPX rather than _PR3 for dGPU power control.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=202263
Reviewed-by: Jim Qu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
10 months agodrm/amdgpu: fix wrong APU judgement
Evan Quan [Wed, 16 Jan 2019 06:11:50 +0000 (14:11 +0800)]
drm/amdgpu: fix wrong APU judgement

Fix the APU judgement to make it really work as expected.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: check PSP support before adding the ip block
Evan Quan [Tue, 8 Jan 2019 05:57:29 +0000 (13:57 +0800)]
drm/amdgpu: check PSP support before adding the ip block

So that we do not need to check this in every internal function.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: Replace kzalloc with kcalloc
Gustavo A. R. Silva [Tue, 15 Jan 2019 05:22:02 +0000 (23:22 -0600)]
drm/amdgpu: Replace kzalloc with kcalloc

Replace kzalloc() function with its 2-factor argument form, kcalloc().

This patch replaces cases of:

kzalloc(a * b, gfp)

with:
kcalloc(a, b, gfp)

Also, improve the coding style and the use of sizeof during
allocation by changing sizeof(struct dc_surface_update) and
sizeof(struct dc_plane_state) to sizeof(*updates) and
sizeof(*surfaces), correspondingly.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: add support for self irq on Vega10 v2
Christian König [Wed, 26 Sep 2018 12:15:21 +0000 (14:15 +0200)]
drm/amdgpu: add support for self irq on Vega10 v2

This finally enables processing of ring 1 & 2.

v2: fix copy&paste error

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: add support for processing IH ring 1 & 2
Christian König [Wed, 26 Sep 2018 11:45:38 +0000 (13:45 +0200)]
drm/amdgpu: add support for processing IH ring 1 & 2

Previously we only added the ring buffer memory, now add the handling as
well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: enable IH ring 1 and ring 2 v4
Christian König [Tue, 18 Sep 2018 12:51:35 +0000 (14:51 +0200)]
drm/amdgpu: enable IH ring 1 and ring 2 v4

The entries are ignored for now, but it at least stops crashing the
hardware when somebody tries to push something to the other IH rings.

v2: limit ring size, add TODO comment
v3: only program rings if they are actually allocated
v4: limit the ring init to Vega10

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: set the executable flag on unused Vega10 PTEs v2
Christian König [Wed, 12 Dec 2018 14:13:10 +0000 (15:13 +0100)]
drm/amdgpu: set the executable flag on unused Vega10 PTEs v2

Otherwise we run into a non-retry fault on access.

It seems to be a hardware bug that the executable bit has
higher priority than the valid bit.

v2: handle clears as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/ttm: stop always moving BOs on the LRU on page fault
Christian König [Fri, 11 Jan 2019 13:12:58 +0000 (14:12 +0100)]
drm/ttm: stop always moving BOs on the LRU on page fault

Move the BO on the LRU only when it is actually moved by a DMA
operation.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Tested-And-Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: support retrieving and adjusting dcefclock power levels V2
Evan Quan [Mon, 14 Jan 2019 09:37:26 +0000 (17:37 +0800)]
drm/amd/powerplay: support retrieving and adjusting dcefclock power levels V2

User can use "pp_dpm_dcefclk" to retrieve and adjust dcefclock power
levels.

V2: expose this interface for Vega10 and later ASICs only

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: support retrieving and adjusting fclock power levels V2
Evan Quan [Mon, 14 Jan 2019 07:44:44 +0000 (15:44 +0800)]
drm/amd/powerplay: support retrieving and adjusting fclock power levels V2

User can use "pp_dpm_fclk" to retrieve and adjust fclock power
levels.

V2: expose this interface for Vega20 and later ASICs only

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: support retrieving and adjusting SOC clock power levels V2
Evan Quan [Mon, 14 Jan 2019 06:45:47 +0000 (14:45 +0800)]
drm/amd/powerplay: support retrieving and adjusting SOC clock power levels V2

User can use "pp_dpm_socclk" to retrieve and adjust SOC clock power
levels.

V2: expose this interface for Vega10 and later ASICs only

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/powerplay: support enabled ppfeatures retrieving and setting V3
Evan Quan [Mon, 14 Jan 2019 06:06:54 +0000 (14:06 +0800)]
drm/amd/powerplay: support enabled ppfeatures retrieving and setting V3

User can use "ppfeatures" sysfs interface to retrieve and set enabled
powerplay features.

V2: expose this feature for Vega10 and later dGPUs
V3: squash in removal of unused variable (Alex)

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: set bulk_moveable to false when lru changed v2
Chunming Zhou [Thu, 10 Jan 2019 07:49:54 +0000 (15:49 +0800)]
drm/amdgpu: set bulk_moveable to false when lru changed v2

if lru is changed, we cannot do bulk moving.
v2:
root bo isn't in bulk moving, skip its change.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/ttm: add lru notify to bo driver v2
Chunming Zhou [Thu, 10 Jan 2019 09:56:39 +0000 (17:56 +0800)]
drm/ttm: add lru notify to bo driver v2

allow driver do somethings when lru changed.
v2:
address Michel's comments.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu/psp: ignore psp response status
Aaron Liu [Mon, 14 Jan 2019 08:08:32 +0000 (16:08 +0800)]
drm/amdgpu/psp: ignore psp response status

In some cases, psp response status is not 0 even there is no
problem while the command is submitted. Some version of PSP FW
doesn't write 0 to that field.
So here we would like to only print a warning instead of an error
during psp initialization to avoid breaking hw_init and it doesn't
return -EINVAL.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Xiangliang Yu<Xiangliang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Paul Menzel <pmenzel+amd-gfx@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: Setting doorbell range registers earlier
Oak Zeng [Mon, 14 Jan 2019 22:32:53 +0000 (16:32 -0600)]
drm/amdgpu: Setting doorbell range registers earlier

HW doorbell writing routing policy: writing to doorbell
not in SDMA/IH/MM/ACV doorbell range will be routed to CP.
So CP doorbell routing depends on doorbell range setting
of above blocks. Setting doorbell range of above blocks
earlier (soc15_common_hw_init) to make sure CP doorbell
writing be routed to CP block.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: Fix sdma doorbell range setting
Oak Zeng [Tue, 18 Dec 2018 02:03:45 +0000 (20:03 -0600)]
drm/amdgpu: Fix sdma doorbell range setting

Different ASIC has different SDMA queue number so
different SDMA doorbell range. Introduce an extra
parameter to sdma_doorbell_range function and set
sdma doorbell range correctly.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: Add per device sdma_doorbell_range field
Oak Zeng [Tue, 18 Dec 2018 01:42:58 +0000 (19:42 -0600)]
drm/amdgpu: Add per device sdma_doorbell_range field

Different ASIC has different sdma doorbell range. Add
a per device sdma_doorbell_range field and initialize
it.

Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu/soc15: return proper error codes in baco reset
Alex Deucher [Mon, 14 Jan 2019 19:56:42 +0000 (14:56 -0500)]
drm/amdgpu/soc15: return proper error codes in baco reset

Rather than just -1.

Reviewed-by: JimQu <Jim.Qu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Include names of all PP clock types
Rafał Miłecki [Sun, 13 Jan 2019 13:24:07 +0000 (14:24 +0100)]
drm/amd/display: Include names of all PP clock types

This fixes printing clock names in cases like:
[    5.352311] [drm] DM_PPLIB: values for Invalid clock
[    5.352313] [drm] DM_PPLIB:   400000 in kHz
[    5.352313] [drm] DM_PPLIB:   933000 in kHz
[    5.352314] [drm] DM_PPLIB:   1067000 in kHz
[    5.352315] [drm] DM_PPLIB:   1200000 in kHz
[    5.352317] [drm] DM_PPLIB: values for Invalid clock
[    5.352318] [drm] DM_PPLIB:   300000 in kHz
[    5.352318] [drm] DM_PPLIB:   600000 in kHz
[    5.352319] [drm] DM_PPLIB:   626000 in kHz
[    5.352320] [drm] DM_PPLIB:   654000 in kHz
(source: HP EliteBook 745 G5 w. RAVEN 0x1002:0x15DD 0x103C:0x83D5 0xD1)

On my system above "Invalid" names got replaced by "F" and "DCF".

The same problem was occurring on Huawei Matebook D with just 667000 kHz
instead of 400000 kHz.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd: fix typo
Matteo Croce [Mon, 7 Jan 2019 13:06:00 +0000 (14:06 +0100)]
drm/amd: fix typo

Fix spelling mistake: "lenght" -> "length"

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amd/display: Skip create new stream if crtc state doesn't change
Jerry (Fangzhi) Zuo [Fri, 11 Jan 2019 21:34:31 +0000 (16:34 -0500)]
drm/amd/display: Skip create new stream if crtc state doesn't change

Need to check if crtc state is changed so that mode set is
required before trying to create new stream.

It deals with the MST hotplug use case when plug back to the
same connector where the failure to create new stream for the
inactive crtc on the old connector.

Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: use BACO reset on vega20 if platform support
Jim Qu [Thu, 8 Nov 2018 06:07:22 +0000 (14:07 +0800)]
drm/amdgpu: use BACO reset on vega20 if platform support

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: use BACO reset if platform support (v2)
Jim Qu [Wed, 7 Nov 2018 04:29:39 +0000 (12:29 +0800)]
drm/amdgpu: use BACO reset if platform support (v2)

It will fall back to use mode1 reset if platform does not support BACO
feature.

v2: squash in warning fix (Alex)

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu/powerper: add vega20 BACO functions
Jim Qu [Thu, 8 Nov 2018 05:02:00 +0000 (13:02 +0800)]
drm/amdgpu/powerper: add vega20 BACO functions

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: update THM IP register header to support BACO
Jim Qu [Thu, 8 Nov 2018 10:32:41 +0000 (18:32 +0800)]
drm/amdgpu: update THM IP register header to support BACO

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: also include NBIO v7.4 register mask header
Jim Qu [Thu, 8 Nov 2018 10:26:22 +0000 (18:26 +0800)]
drm/amdgpu: also include NBIO v7.4 register mask header

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: update NBIO v7.4 to support BACO
Jim Qu [Thu, 8 Nov 2018 10:21:05 +0000 (18:21 +0800)]
drm/amdgpu: update NBIO v7.4 to support BACO

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: expose BACO interfaces to upper level from PP
Jim Qu [Wed, 9 Jan 2019 08:42:05 +0000 (16:42 +0800)]
drm/amdgpu: expose BACO interfaces to upper level from PP

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdgpu: add BACO interfaces for vega10
Jim Qu [Wed, 7 Nov 2018 03:24:45 +0000 (11:24 +0800)]
drm/amdgpu: add BACO interfaces for vega10

V2: delay 20ms before BACO out.
V3: rename function to vega10_baco_xxx

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/amdpgu: add common functions for BACO feature in PP (v2)
Jim Qu [Tue, 20 Nov 2018 02:58:25 +0000 (10:58 +0800)]
drm/amdpgu: add common functions for BACO feature in PP (v2)

V2: squash in crash fix for non-register commands (Alex)

Signed-off-by: Jim Qu <Jim.Qu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
10 months agodrm/i915: Update DRIVER_DATE to 20190124
Rodrigo Vivi [Thu, 24 Jan 2019 23:00:59 +0000 (15:00 -0800)]
drm/i915: Update DRIVER_DATE to 20190124

Signed-off-by: Rodrigo Vivi <vivijim@rdvivi-cozumel.jf.intel.com>
10 months agoMerge tag 'gvt-next-2019-01-24' of https://github.com/intel/gvt-linux into drm-intel...
Rodrigo Vivi [Thu, 24 Jan 2019 22:50:02 +0000 (14:50 -0800)]
Merge tag 'gvt-next-2019-01-24' of https://github.com/intel/gvt-linux into drm-intel-next-queued

gvt-next-2019-01-24

- split kvmgt as seperate module (Zhenyu)
- Coffeelake GVT support (Fred)
- const treatment and change for kernel type (Jani)

Signed-off-by: Rodrigo Vivi <vivijim@rdvivi-cozumel.jf.intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124054048.GO7203@zhen-hp.sh.intel.com
10 months agodrm/i915: Make HW readout mark CRTC scaler as in use.
Maarten Lankhorst [Tue, 8 Jan 2019 16:08:41 +0000 (17:08 +0100)]
drm/i915: Make HW readout mark CRTC scaler as in use.

This way we don't accidentally double allocate it.
Noticed this when I wrote a patch to sanity check all of
the scaler state.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108160842.13396-4-maarten.lankhorst@linux.intel.com
10 months agodrm/i915: Enable fastset for non-boot modesets.
Maarten Lankhorst [Tue, 8 Jan 2019 16:08:40 +0000 (17:08 +0100)]
drm/i915: Enable fastset for non-boot modesets.

Now that our state comparison functions are pretty complete, we should
enable fastset by default when a modeset can be avoided. Even if we're
not completely certain about the inherited state, we can be certain
after the first modeset that our sw state matches the hw state.

There is one testcase explicitly testing fastset,
kms_panel_fitting.atomic-fastset but other testcases do so indirectly
because most tests don't clean up the display during exit, or otherwise
indirectly preserve mode by doing igt_display_reset or inheriting during
init.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
[mlankhorst: Use DRM_DEBUG_KMS. (j4ni)]
Link: https://patchwork.freedesktop.org/patch/msgid/20190108160842.13396-3-maarten.lankhorst@linux.intel.com
10 months agodrm/i915/backlight: Fix backlight takeover on LPT, v3.
Maarten Lankhorst [Tue, 8 Jan 2019 16:08:39 +0000 (17:08 +0100)]
drm/i915/backlight: Fix backlight takeover on LPT, v3.

On lynxpoint the bios sometimes sets up the backlight using the CPU
display, but the driver expects using the PWM PCH override register.

Read the value from the CPU register, then convert it to the other
units by converting from the old duty cycle, to freq, to the new units.

This value is then programmed in the override register, after which
we set the override and disable the CPU display control. This allows
us to switch the source without flickering, and make the backlight
controls work in the driver.

Changes since v1:
- Read BLC_PWM_CPU_CTL2 to cpu_ctl2.
- Clean up cpu_mode if slightly.
- Always disable BLM_PWM_ENABLE in cpu_ctl2.
Changes since v2:
- Simplify cpu_mode handling (Jani)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108225
Cc: Basil Eric Rabi <ericbasil.rabi@gmail.com>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Cc: Tolga Cakir <cevelnet@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Tolga Cakir <cevelnet@gmail.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108160842.13396-2-maarten.lankhorst@linux.intel.com
10 months agodrm/i915/backlight: Restore backlight on resume, v3.
Maarten Lankhorst [Tue, 8 Jan 2019 16:08:38 +0000 (17:08 +0100)]
drm/i915/backlight: Restore backlight on resume, v3.

Restore our saved values for backlight. This way even with fastset on
S4 resume we will correctly restore the backlight to the active values.

Changes since v1:
- Call enable_backlight() when backlight.level is set. On suspend
  backlight.enabled is always cleared, this makes it not a good
  indicator. Also check for crtc->state->active.
Changes since v2:
- Use the new update_pipe() callback to run this on resume as well.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tolga Cakir <cevelnet@gmail.com>
Cc: Basil Eric Rabi <ericbasil.rabi@gmail.com>
Cc: Hans de Goede <jwrdegoede@fedoraproject.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108160842.13396-1-maarten.lankhorst@linux.intel.com
10 months agoMerge tag 'drm-misc-next-2019-01-23' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Thu, 24 Jan 2019 09:52:46 +0000 (19:52 +1000)]
Merge tag 'drm-misc-next-2019-01-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.1:

UAPI Changes:
 - Addition of the Allwinner tiled format modifier

Cross-subsystem Changes:

Core Changes:
 - dma-buf documentation improvements
 - Removal of now unused fbdev helpers
 - Addition of new drm fbdev helpers
 - Improvements to tinydrm
 - Addition of new drm_fourcc helpers
 - Impromevents to i2c-over-aux to handle I2C_M_STOP

Driver Changes:
 - Add support for the TI DS90C185 LVDS bridge
 - Improvements to the thc63lvdm83d bridge
 - Improvements to sun4i YUV and scaler support
 - Fix to the powerdown sequence of panel-innolux

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123110317.h4tovujaydo2bfz2@flea
10 months agodrm/i915: De-inline intel_context_init()
Chris Wilson [Thu, 24 Jan 2019 08:37:10 +0000 (08:37 +0000)]
drm/i915: De-inline intel_context_init()

Nip some inline spaghetti in the bud before the problem gets too bad.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124083710.7033-1-chris@chris-wilson.co.uk
10 months agoMerge tag 'drm-intel-next-2019-01-10' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Thu, 24 Jan 2019 09:44:16 +0000 (19:44 +1000)]
Merge tag 'drm-intel-next-2019-01-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Unwind failure on pinning the gen7 PPGTT (Chris)
- Fastset updates to make sure DRRS and PSR are properly enabled (Hans)
- Header include clean-up (Brajeswar, Jani)
- Improvements and clean-up on debugfs (Chris, Jani)
- Avoid division by zero on CNL clocks setup (Xiao)
- Restrict PSMI context load w/a to Haswell GT1 (Chris)
- Remove HW semaphores for gen7 inter-engine sync (Chris)
- Pull the render flush into breadcrumb emission (Chris)
- i915_params copy and free helpers and other reorgs and docs (Jani)
- Remove has_pooled_eu static initializer (Tvrtko)
- Updates on kerneldoc (Chris)
- Remove redundant trailing request flush (Chris)
- ringbuffer irq seqno fixes and clean-up (Chris)
- splitting off runtime device info and other clean-up around (Jani)
- Selftests improvements (Chris, Daniele)
- Flush RING_IMR changes before changing the global GT IMR on gen6 and HSW (Chris)
- Some improvements and fixes around GPU reset and GPU hang report (Chris)
- Remove partial attempt to swizzle on pread/pwrite (Chris)
- Return immediately if trylock fails for direct-reclaim (Chris)
- Downgrade scare message for unknown HuC firmware (Jani)
- ACPI / PMIC for MIPI / DSI (Hans)
- Reduce i915_request_alloc retirement to local context (Chris)
- Init per-engine WAs for all engines (Daniele)
- drop DPF code for gen8+ (Daniele)
- Guard error capture against unpinned vma (Chris)
- Use mutex_lock_killable from inside the shrinker (Chris)
- Removing pooling from struct_mutex from vmap shrinker (Chris)

Signed-off-by: Dave Airlie <airlied@redhat.com>
# gpg: Signature made Fri 11 Jan 2019 09:58:18 AEST
# gpg:                using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA

# Conflicts:
# drivers/gpu/drm/i915/intel_dp.c
# drivers/gpu/drm/i915/intel_drv.h
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190114183820.GA2855@intel.com
10 months agodrm/i915/crt: simplify CRT VBT check on pre-VLV/DDI
Jani Nikula [Tue, 22 Jan 2019 08:23:07 +0000 (10:23 +0200)]
drm/i915/crt: simplify CRT VBT check on pre-VLV/DDI

The VBT int_crt_support can't be trusted on earlier platforms, and is
always set to true in intel_bios.c for pre-DDI and pre-VLV platforms. We
can simplify the output setup by unconditionally calling
intel_crt_init() for these platforms.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-7-jani.nikula@intel.com
10 months agodrm/i915/lvds: simplify gen 2 lvds presence
Jani Nikula [Tue, 22 Jan 2019 08:23:06 +0000 (10:23 +0200)]
drm/i915/lvds: simplify gen 2 lvds presence

Gen 2 mobile and not I830 is, in fact, I85X. Simplify.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-6-jani.nikula@intel.com
10 months agodrm/i915: rename has_edp_a() to ilk_has_edp_a()
Jani Nikula [Tue, 22 Jan 2019 08:23:05 +0000 (10:23 +0200)]
drm/i915: rename has_edp_a() to ilk_has_edp_a()

Clarify that the name is specific to ILK+ PCH platforms.

v2: prefix the name with ilk rather than pch (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-5-jani.nikula@intel.com
10 months agodrm/i915/tv: only call intel_tv_init() on platforms that might have TV
Jani Nikula [Tue, 22 Jan 2019 08:23:04 +0000 (10:23 +0200)]
drm/i915/tv: only call intel_tv_init() on platforms that might have TV

With most platforms not having TV support, only call intel_tv_init() on
platforms that might actually have TV, specifically gens 3 and 4.

This puts intel_tv_init() more in line with the rest of the outputs, and
makes it slightly easier for the uninitiated to figure out which
platforms actually have what.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-4-jani.nikula@intel.com
10 months agodrm/i915/lvds: nuke intel_lvds_supported()
Jani Nikula [Tue, 22 Jan 2019 08:23:03 +0000 (10:23 +0200)]
drm/i915/lvds: nuke intel_lvds_supported()

Now that intel_lvds_init() is only called for platforms that might have
LVDS, move the remaining checks to intel_setup_outputs(), again similar
to other outputs, and remove the overlapping checks.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-3-jani.nikula@intel.com
10 months agodrm/i915/lvds: only call intel_lvds_init() on platforms that might have LVDS
Jani Nikula [Tue, 22 Jan 2019 08:23:02 +0000 (10:23 +0200)]
drm/i915/lvds: only call intel_lvds_init() on platforms that might have LVDS

With new platforms not having LVDS support, only call intel_lvds_init()
on platforms that might actually have LVDS. Move the comment about eDP
init to the PCH block where it's relevant.

This puts intel_lvds_init() more in line with the rest of the outputs,
and makes it slightly easier for the uninitiated to figure out which
platforms actually have what.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-2-jani.nikula@intel.com
10 months agodrm/i915/crt: split out intel_crt_present() to platform specific setup
Jani Nikula [Tue, 22 Jan 2019 08:23:01 +0000 (10:23 +0200)]
drm/i915/crt: split out intel_crt_present() to platform specific setup

With new platforms not having CRT support and most conditions in
intel_crt_present() being specific to DDI, split out the CRT
initialization to platform specific blocks in the if ladder. Add new
Pineview block for this.

This puts intel_crt_init() more in line with the rest of the outputs,
and makes it slightly easier for the uninitiated to figure out which
platforms actually have what.

v2: keep gen >= 9 check in intel_ddi_crt_present() (Ville)

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190122082307.4003-1-jani.nikula@intel.com
10 months agodrm/i915: Validate userspace-provided color management LUT's (v4)
Matt Roper [Tue, 18 Dec 2018 17:51:58 +0000 (09:51 -0800)]
drm/i915: Validate userspace-provided color management LUT's (v4)

We currently program userspace-provided gamma and degamma LUT's into our
hardware without really checking to see whether they satisfy our
hardware's rules.  We should try to catch tables that are invalid for
our hardware early and reject the atomic transaction.

All of our platforms that accept a degamma LUT expect that the entries
in the LUT are always flat or increasing, never decreasing.  Also, our
GLK and ICL platforms only accept degamma tables with r=g=b entries; so
we should also add the relevant checks for that in anticipation of
degamma support landing for those platforms.

v2:
 - Use new API (single check function with bitmask of tests to apply)
 - Call helper for our gamma table as well (with no additional tests
   specified) so that the table size will be validated.

v3:
 - Don't call on the gamma table since the LUT size is already tested at
   property blob upload and we don't have any additional hardware
   constraints for that LUT.

v4:
 - Apply equal color channel check on gen10 as well; the bspec has some
   strange tagging for CNL platforms, but this appears to apply there as
   well.  (Ville)

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181218175158.5739-1-matthew.d.roper@intel.com
10 months agodrm: Add color management LUT validation helper (v4)
Matt Roper [Mon, 17 Dec 2018 22:44:14 +0000 (14:44 -0800)]
drm: Add color management LUT validation helper (v4)

Some hardware may place additional restrictions on the gamma/degamma
curves described by our LUT properties.  E.g., that a gamma curve never
decreases or that the red/green/blue channels of a LUT's entries must be
equal.  Let's add a helper function that drivers can use to test that a
userspace-provided LUT is valid and doesn't violate hardware
requirements.

v2:
 - Combine into a single helper that just takes a bitmask of the tests
   to apply.  (Brian Starkey)
 - Add additional check (always performed) that LUT property blob size
   is always a multiple of the LUT entry size.  (stolen from ARM driver)

v3:
 - Drop the LUT size check again since
   drm_atomic_replace_property_blob_from_id() already covers this for
   us.  (Alexandru Gheorghe)

v4:
 - Use an enum to describe possible test values rather than #define's;
   this is cleaner to provide kerneldoc for.  (Daniel Vetter)
 - s/DRM_COLOR_LUT_INCREASING/DRM_COLOR_LUT_NON_DECREASING/.  (Ville)

Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Swati Sharma <swati2.sharma@intel.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Brian Starkey <brian.starkey@arm.com>
Reviewed-by: Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217224415.12848-1-matthew.d.roper@intel.com
10 months agodrm/i915/execlists: Mark up priority boost on preemption
Chris Wilson [Wed, 23 Jan 2019 13:51:55 +0000 (13:51 +0000)]
drm/i915/execlists: Mark up priority boost on preemption

Record the priority boost we giving to the preempted client or else we
may end up in a situation where the priority queue no longer matches the
request priority order and so we can end up in an infinite loop of
preempting the same pair of requests.

Fixes: e9eaf82d97a2 ("drm/i915: Priority boost for waiting clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123135155.21562-1-chris@chris-wilson.co.uk
10 months agodrm/i915/icl: Adding few more device IDs for Ice Lake
Rodrigo Vivi [Fri, 18 Jan 2019 05:59:43 +0000 (21:59 -0800)]
drm/i915/icl: Adding few more device IDs for Ice Lake

We just got aware that there was more IDs available
at spec, so let's add them already.

Cc: James Ausmus <james.ausmus@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118055943.10252-1-rodrigo.vivi@intel.com
10 months agodrm/i915/icl: do a posting read after irq install
Daniele Ceraolo Spurio [Wed, 23 Jan 2019 02:32:27 +0000 (18:32 -0800)]
drm/i915/icl: do a posting read after irq install

When reading GEN11_GT_INTR_DWx closely after enabling the interrupts
in gen11_irq_postinstall, the returned value is garbage. This can
cause other parts of the setup code (e.g. gen11_reset_one_iir) to
think that there are interrupts to be cleared when there are none.

The garbage value is only seen on the first read done after the enable,
so this looks like a posting issue. Adding a posting read after enabling
the interrupts does indeed fix the problem.

Note that the posting read has been purposely added outside of
gen11_master_intr_enable since the issue has only been observed when the
full interrupt setup is performed.

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123023227.8117-1-daniele.ceraolospurio@intel.com
10 months agodrm/i915/sdvo: switch to kernel types
Jani Nikula [Fri, 18 Jan 2019 12:01:18 +0000 (14:01 +0200)]
drm/i915/sdvo: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

v2: rebase

Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190118120125.15484-1-jani.nikula@intel.com
10 months agodrm/i915/gvt: switch to kernel types
Jani Nikula [Mon, 21 Jan 2019 09:51:41 +0000 (11:51 +0200)]
drm/i915/gvt: switch to kernel types

Mixed C99 and kernel types use is getting ugly. Prefer kernel types.

sed -i 's/\buint\(8\|16\|32\|64\)_t\b/u\1/g'

Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
10 months agodrm/i915/debugfs: Print PSR selective update status register values
José Roberto de Souza [Thu, 17 Jan 2019 20:55:48 +0000 (12:55 -0800)]
drm/i915/debugfs: Print PSR selective update status register values

The value of this registers will be used to test if PSR2 is doing
selective update and if the number of blocks match with the expected.

v2:
- Using new macros
- Changed the string output

v3:
- reading PSR2_SU_STATUS registers together(Dhinakaran)
- printing SU blocks of frames with 0 updates(Dhinakaran)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-4-jose.souza@intel.com
10 months agodrm/i915: Add PSR2 selective update status registers and bits definitions
José Roberto de Souza [Thu, 17 Jan 2019 20:55:47 +0000 (12:55 -0800)]
drm/i915: Add PSR2 selective update status registers and bits definitions

This register contains how many blocks was sent in the past selective
updates.
Those registers are not kept set all the times but polling it after flip
can show the values corresponding to the last 8 frames.

v2: Improved macros(Dhinakaran)

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190117205548.28378-3-jose.souza@intel.com