sfrench/cifs-2.6.git
5 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 16 Apr 2014 23:40:18 +0000 (16:40 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
 "Various fixes:

   - reboot regression fix
   - build message spam fix
   - GPU quirk fix
   - 'make kvmconfig' fix

  plus the wire-up of the renameat2() system call on i386"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Remove the PCI reboot method from the default chain
  x86/build: Supress "Nothing to be done for ..." messages
  x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirks
  x86/platform: Fix "make O=dir kvmconfig"
  i386: Wire up the renameat2() syscall

5 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 16 Apr 2014 23:38:57 +0000 (16:38 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "Tooling fixes, plus a simple hardware-enablement patch for the Intel
  RAPL PMU (energy use measurement) on Haswell CPUs, which I hope is
  still fine at this stage"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Instead of redirecting flex output, use -o
  perf tools: Fix double free in perf test 21 (code-reading.c)
  perf stat: Initialize statistics correctly
  perf bench: Set more defaults in the 'numa' suite
  perf bench: Fix segfault at the end of an 'all' execution
  perf bench: Update manpage to mention numa and futex
  perf probe: Use dwarf_getcfi_elf() instead of dwarf_getcfi()
  perf probe: Fix to handle errors in line_range searching
  perf probe: Fix --line option behavior
  perf tools: Pick up libdw without explicit LIBDW_DIR
  MAINTAINERS: Change e-mail to kernel.org one
  perf callchains: Disable unwind libraries when libelf isn't found
  tools lib traceevent: Do not call warning() directly
  tools lib traceevent: Print event name when show warning if possible
  perf top: Fix documentation of invalid -s option
  perf/x86: Enable DRAM RAPL support on Intel Haswell

5 years agoMerge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 16 Apr 2014 23:36:00 +0000 (16:36 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Ingo Molnar:
 "ARM VIC (Vectored Irq Controller) irqchip driver fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: vic: Properly chain the cascaded IRQs

5 years agoMerge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 16 Apr 2014 23:35:18 +0000 (16:35 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Ingo Molnar:
 "liblockdep fixes and mutex debugging fixes"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/mutex: Fix debug_mutexes
  tools/liblockdep: Add proper versioning to the shared obj
  tools/liblockdep: Ignore asmlinkage and visible

5 years agoMerge tag 'fbdev-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba...
Linus Torvalds [Wed, 16 Apr 2014 23:03:24 +0000 (16:03 -0700)]
Merge tag 'fbdev-fixes-3.15' of git://git./linux/kernel/git/tomba/linux

Pull fbdev fixes from Tomi Valkeinen:
 - fix build errors for bf54x-lq043fb and imxfb
 - fbcon fix for da8xx-fb
 - omapdss fixes for hdmi audio, irq handling and fclk calculation

* tag 'fbdev-fixes-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: bf54x-lq043fb: fix build error
  OMAPDSS: Change struct reg_field to dispc_reg_field
  OMAPDSS: Take pixelclock unit change into account in hdmi_compute_acr()
  OMAPDSS: fix shared irq handlers
  video: imxfb: Select LCD_CLASS_DEVICE unconditionally
  OMAPDSS: fix rounding when calculating fclk rate
  video: da8xx-fb: Fix casting of info->pseudo_palette

5 years agoMerge tag 'pinctrl-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Wed, 16 Apr 2014 22:59:16 +0000 (15:59 -0700)]
Merge tag 'pinctrl-v3.15-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pincontrol fixes from Linus Walleij:
 "A first set of pin control fixes for the v3.15 series:

   - Fix a couple of barnsjukdomar on the Rockchip driver.

   - Remove an idiotic debug print I happened to leave behind in the
     Nomadik driver.

   - Fixup the Qualcomm MSM interrupt handling code for the TLMM v2.

   - Three patches renaming the Broadcom Capri driver to BCM28155.  This
     has been falling between the chairs for some time due to some
     cross-tree synchronization misunderstandings, now I'm fed up with
     this and just rename it in this -rc1 phase"

* tag 'pinctrl-v3.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: fix typo in bindings documentation
  Update bcm_defconfig with new pinctrl CONFIG
  pinctrl: Rename Broadcom Capri pinctrl driver
  pinctrl: msm: Correct interrupt code for TLMM v2
  pinctrl: nomadik: delete stray debug print
  pinctrl: rockchip: handle first half of rk3188-bank0 correctly
  pinctrl: rockchip: add return value to rockchip_set_mux
  pinctrl: rockchip: fix offset of mux registers for rk3188

5 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Wed, 16 Apr 2014 18:28:25 +0000 (11:28 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 patches from Martin Schwidefsky:
 "An update to the oops output with additional information about the
  crash.  The renameat2 system call is enabled.  Two patches in regard
  to the PTR_ERR_OR_ZERO cleanup.  And a bunch of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/sclp_cmd: replace PTR_RET with PTR_ERR_OR_ZERO
  s390/sclp: replace PTR_RET with PTR_ERR_OR_ZERO
  s390/sclp_vt220: Fix kernel panic due to early terminal input
  s390/compat: fix typo
  s390/uaccess: fix possible register corruption in strnlen_user_srst()
  s390: add 31 bit warning message
  s390: wire up sys_renameat2
  s390: show_registers() should not map user space addresses to kernel symbols
  s390/mm: print control registers and page table walk on crash
  s390/smp: fix smp_stop_cpu() for !CONFIG_SMP
  s390: fix control register update

5 years agoMerge tag 'please-pull-ia64-erratum' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 16 Apr 2014 18:22:45 +0000 (11:22 -0700)]
Merge tag 'please-pull-ia64-erratum' of git://git./linux/kernel/git/aegl/linux

Pull itanium erratum fix from Tony Luck:
 "Small workaround for a rare, but annoying, erratum #237"

* tag 'please-pull-ia64-erratum' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)

5 years ago[IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)
Tony Luck [Fri, 28 Mar 2014 21:42:07 +0000 (14:42 -0700)]
[IA64] Change default PSR.ac from '1' to '0' (Fix erratum #237)

April 2014 Itanium processor specification update:

http://www.intel.com/content/www/us/en/processors/itanium/itanium-specification-update.html

describes this erratum:

=========================================================================
237. Under a complex set of conditions, store to load forwarding for a
sub 8-byte load may complete incorrectly

Problem: A load instruction may complete incorrectly when a code sequence
using 4-byte or smaller load and store operations to the same address
is executed in combination with specific timing of all the following
concurrent conditions: store to load forwarding, alignment checking
enabled, a mis-predicted branch, and complex cache utilization activity.

Implication: The affected sub 8-byte instruction may complete
incorrectly resulting in unpredictable system behavior. There is an
extremely low probability of exposure due to the significant number of
complex microarchitectural concurrent conditions required to encounter
the erratum.

Workaround: Set PSR.ac = 0 to completely avoid the erratum. Disabling
Hyper-Threading will significantly reduce exposure to the conditions
that contribute to encountering the erratum.

Status: See the Summary Table of Changes for the affected steppings.
=========================================================================

[Table of changes essentially lists all models from McKinley to Tukwila]

The PSR.ac bit controls whether the processor will always generate
an unaligned reference trap (0x5a00) for a misaligned data access
(when PSR.ac=1) or if it will let the access succeed when running
on a cpu that implements logic to handle some unaligned accesses.

Way back in 2008 in commit b704882e70d87d7f56db5ff17e2253f3fa90e4f3
  [IA64] Rationalize kernel mode alignment checking
we made the decision to always enable strict checking. We were
already doing so in trap/interrupt context because the common
preamble code set this bit - but the rest of supervisor code
(and by inheritance user code) ran with PSR.ac=0.

We now reverse that decision and set PSR.ac=0 everywhere in the
kernel (also inherited by user processes). This will avoid the
erratum using the method described in the Itanium specification
update.  Net effect for users is that the processor will handle
unaligned access when it can (typically with a tiny performance
bubble in the pipeline ... but much less invasive than taking a
trap and having the OS perform the access).

Signed-off-by: Tony Luck <tony.luck@intel.com>
5 years agox86: Remove the PCI reboot method from the default chain
Ingo Molnar [Fri, 4 Apr 2014 06:41:26 +0000 (08:41 +0200)]
x86: Remove the PCI reboot method from the default chain

Steve reported a reboot hang and bisected it back to this commit:

  a4f1987e4c54 x86, reboot: Add EFI and CF9 reboot methods into the default list

He heroically tested all reboot methods and found the following:

  reboot=t       # triple fault                  ok
  reboot=k       # keyboard ctrl                 FAIL
  reboot=b       # BIOS                          ok
  reboot=a       # ACPI                          FAIL
  reboot=e       # EFI                           FAIL   [system has no EFI]
  reboot=p       # PCI 0xcf9                     FAIL

And I think it's pretty obvious that we should only try PCI 0xcf9 as a
last resort - if at all.

The other observation is that (on this box) we should never try
the PCI reboot method, but close with either the 'triple fault'
or the 'BIOS' (terminal!) reboot methods.

Thirdly, CF9_COND is a total misnomer - it should be something like
CF9_SAFE or CF9_CAREFUL, and 'CF9' should be 'CF9_FORCE' ...

So this patch fixes the worst problems:

 - it orders the actual reboot logic to follow the reboot ordering
   pattern - it was in a pretty random order before for no good
   reason.

 - it fixes the CF9 misnomers and uses BOOT_CF9_FORCE and
   BOOT_CF9_SAFE flags to make the code more obvious.

 - it tries the BIOS reboot method before the PCI reboot method.
   (Since 'BIOS' is a terminal reboot method resulting in a hang
    if it does not work, this is essentially equivalent to removing
    the PCI reboot method from the default reboot chain.)

 - just for the miraculous possibility of terminal (resulting
   in hang) reboot methods of triple fault or BIOS returning
   without having done their job, there's an ordering between
   them as well.

Reported-and-bisected-and-tested-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Aubrey <aubrey.li@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Link: http://lkml.kernel.org/r/20140404064120.GB11877@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
5 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 16 Apr 2014 03:30:30 +0000 (20:30 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix BPF filter validation of netlink attribute accesses, from
    Mathias Kruase.

 2) Netfilter conntrack generation seqcount not initialized properly,
    from Andrey Vagin.

 3) Fix comparison mask computation on big-endian in nft_cmp_fast(),
    from Patrick McHardy.

 4) Properly limit MTU over ipv6, from Eric Dumazet.

 5) Fix seccomp system call argument population on 32-bit, from Daniel
    Borkmann.

 6) skb_network_protocol() should not use hard-coded ETH_HLEN, instead
    skb->mac_len needs to be used.  From Vlad Yasevich.

 7) We have several cases of using socket based communications to
    implement a tunnel.  For example, some tunnels are encapsulations
    over UDP so we use an internal kernel UDP socket to do the
    transmits.

    These tunnels should behave just like other software devices and
    pass the packets on down to the next layer.

    Most importantly we want the top-level socket (eg TCP) that created
    the traffic to be charged for the SKB memory.

    However, once you get into the IP output path, we have code that
    assumed that whatever was attached to skb->sk is an IP socket.

    To keep the top-level socket being charged for the SKB memory,
    whilst satisfying the needs of the IP output path, we now pass in an
    explicit 'sk' argument.

    From Eric Dumazet.

 8) ping_init_sock() leaks group info, from Xiaoming Wang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits)
  cxgb4: use the correct max size for firmware flash
  qlcnic: Fix MSI-X initialization code
  ip6_gre: don't allow to remove the fb_tunnel_dev
  ipv4: add a sock pointer to dst->output() path.
  ipv4: add a sock pointer to ip_queue_xmit()
  driver/net: cosa driver uses udelay incorrectly
  at86rf230: fix __at86rf230_read_subreg function
  at86rf230: remove check if AVDD settled
  net: cadence: Add architecture dependencies
  net: Start with correct mac_len in skb_network_protocol
  Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer"
  cxgb4: Save the correct mac addr for hw-loopback connections in the L2T
  net: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_W
  seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF
  qlcnic: Do not disable SR-IOV when VFs are assigned to VMs
  qlcnic: Fix QLogic application/driver interface for virtual NIC configuration
  qlcnic: Fix PVID configuration on eSwitch port.
  qlcnic: Fix max ring count calculation
  qlcnic: Fix to send INIT_NIC_FUNC as first mailbox.
  qlcnic: Fix panic due to uninitialzed delayed_work struct in use.
  ...

5 years agocxgb4: use the correct max size for firmware flash
Steve Wise [Tue, 15 Apr 2014 19:22:34 +0000 (14:22 -0500)]
cxgb4: use the correct max size for firmware flash

The wrong max fw size was being used and causing false
"too big" errors running ethtool -f.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoqlcnic: Fix MSI-X initialization code
Alexander Gordeev [Tue, 15 Apr 2014 09:37:14 +0000 (11:37 +0200)]
qlcnic: Fix MSI-X initialization code

Function qlcnic_setup_tss_rss_intr() might enter endless
loop in case pci_enable_msix() contiguously returns a
positive number of MSI-Xs that could have been allocated.
Besides, the function contains 'err = -EIO;' assignment
that never could be reached. This update fixes the
aforementioned issues.

Cc: Shahed Shaikh <shahed.shaikh@qlogic.com>
Cc: Dept-HSGLinuxNICDev@qlogic.com
Cc: netdev@vger.kernel.org
Cc: linux-pci@vger.kernel.org
Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Acked-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoip6_gre: don't allow to remove the fb_tunnel_dev
Nicolas Dichtel [Mon, 14 Apr 2014 15:11:38 +0000 (17:11 +0200)]
ip6_gre: don't allow to remove the fb_tunnel_dev

It's possible to remove the FB tunnel with the command 'ip link del ip6gre0' but
this is unsafe, the module always supposes that this device exists. For example,
ip6gre_tunnel_lookup() may use it unconditionally.

Let's add a rtnl handler for dellink, which will never remove the FB tunnel (we
let ip6gre_destroy_tunnels() do the job).

Introduced by commit c12b395a4664 ("gre: Support GRE over IPv6").

CC: Dmitry Kozlov <xeb@mail.ru>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoipv4: add a sock pointer to dst->output() path.
Eric Dumazet [Tue, 15 Apr 2014 17:47:15 +0000 (13:47 -0400)]
ipv4: add a sock pointer to dst->output() path.

In the dst->output() path for ipv4, the code assumes the skb it has to
transmit is attached to an inet socket, specifically via
ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the
provider of the packet is an AF_PACKET socket.

The dst->output() method gets an additional 'struct sock *sk'
parameter. This needs a cascade of changes so that this parameter can
be propagated from vxlan to final consumer.

Fixes: 8f646c922d55 ("vxlan: keep original skb ownership")
Reported-by: lucien xin <lucien.xin@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Tue, 15 Apr 2014 17:25:07 +0000 (19:25 +0200)]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/jolsa/perf into perf/urgent

Pull perf/urgent fixes from Jiri Olsa:

  * Instead of redirecting flex output, use -o (Cody P Schafer)

  * Fix double free in perf test 21 (Adrian Hunter)

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
5 years agoipv4: add a sock pointer to ip_queue_xmit()
Eric Dumazet [Tue, 15 Apr 2014 16:58:34 +0000 (12:58 -0400)]
ipv4: add a sock pointer to ip_queue_xmit()

ip_queue_xmit() assumes the skb it has to transmit is attached to an
inet socket. Commit 31c70d5956fc ("l2tp: keep original skb ownership")
changed l2tp to not change skb ownership and thus broke this assumption.

One fix is to add a new 'struct sock *sk' parameter to ip_queue_xmit(),
so that we do not assume skb->sk points to the socket used by l2tp
tunnel.

Fixes: 31c70d5956fc ("l2tp: keep original skb ownership")
Reported-by: Zhan Jianyu <nasa4836@gmail.com>
Tested-by: Zhan Jianyu <nasa4836@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoirqchip: vic: Properly chain the cascaded IRQs
Linus Walleij [Tue, 15 Apr 2014 08:28:04 +0000 (10:28 +0200)]
irqchip: vic: Properly chain the cascaded IRQs

We are flagging the parent IRQ as chained, then we must also
make sure to call the chained_irq_[enter|exit] functions for
things to work smoothly.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: http://lkml.kernel.org/r/1397550484-7119-1-git-send-email-linus.walleij@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
5 years agoperf tools: Instead of redirecting flex output, use -o
Cody P Schafer [Mon, 14 Apr 2014 10:47:01 +0000 (12:47 +0200)]
perf tools: Instead of redirecting flex output, use -o

This gives us a real filename instead of having '<stdout>' show up all
over the place when debugging.

Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1396652539-2416-1-git-send-email-cody@linux.vnet.ibm.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf tools: Fix double free in perf test 21 (code-reading.c)
Adrian Hunter [Thu, 10 Apr 2014 09:02:54 +0000 (12:02 +0300)]
perf tools: Fix double free in perf test 21 (code-reading.c)

perf_evlist__delete() deletes attached cpu and thread maps
but the test is still using them, so remove them from the
evlist before deleting it.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/53465E3E.8070201@intel.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agovideo: bf54x-lq043fb: fix build error
Steven Miao [Tue, 15 Apr 2014 07:17:19 +0000 (15:17 +0800)]
video: bf54x-lq043fb: fix build error

Fix build error by including linux/gpio.h. Also drop asm/gpio.h which is
not needed.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
5 years agodriver/net: cosa driver uses udelay incorrectly
Li, Zhen-Hua [Tue, 15 Apr 2014 01:53:11 +0000 (09:53 +0800)]
driver/net: cosa driver uses udelay incorrectly

In cosa driver, udelay with more than 20000 may cause __bad_udelay.
Use msleep for instead.

Signed-off-by: Li, Zhen-Hua <zhen-hual@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoat86rf230: fix __at86rf230_read_subreg function
Alexander Aring [Mon, 14 Apr 2014 16:48:02 +0000 (18:48 +0200)]
at86rf230: fix __at86rf230_read_subreg function

The __at86rf230_read_subreg function don't mask and shift register
contents which it should do. This patch adds the necessary masks and
shift operations in this function.

Since we have csma support this can make some trouble on state changes.
Since CSMA support turned on some bits in the TRX_STATUS register that
used to be zero, not masking broke checking of the TRX_STATUS field
after commanding a state change.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoat86rf230: remove check if AVDD settled
Alexander Aring [Mon, 14 Apr 2014 16:48:01 +0000 (18:48 +0200)]
at86rf230: remove check if AVDD settled

The AVDD regulator is only enabled when the RF section is active TX_ON
(PLL_ON) state. Since commit 7dcbd22a97eb0689e6c583ad630ae0e7341e34c1
("ieee802154: ensure that first RF212 state comes from TRX_OFF").
We are in TRX_OFF state at the time at86rf230_hw_init is run.

Note that this test would only fail in case of a severe hardware
malfunction (faulty/shorted power supply, etc.) so it wasn't all that
useful in the first place.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Reviewed-by: Werner Almesberger <werner@almesberger.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: cadence: Add architecture dependencies
Jean Delvare [Mon, 14 Apr 2014 13:38:49 +0000 (15:38 +0200)]
net: cadence: Add architecture dependencies

The Cadence ethernet chipsets are only used on specific ARM
architectures. Add Kconfig dependencies so that drivers for these
chipsets are only buildable on the relevant architectures.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Mon, 14 Apr 2014 23:21:28 +0000 (16:21 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Marcelo Tosatti:
 - Fix for guest triggerable BUG_ON (CVE-2014-0155)
 - CR4.SMAP support
 - Spurious WARN_ON() fix

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: remove WARN_ON from get_kernel_ns()
  KVM: Rename variable smep to cr4_smep
  KVM: expose SMAP feature to guest
  KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode
  KVM: Add SMAP support when setting CR4
  KVM: Remove SMAP bit from CR4_RESERVED_BITS
  KVM: ioapic: try to recover if pending_eoi goes out of range
  KVM: ioapic: fix assignment of ioapic->rtc_status.pending_eoi (CVE-2014-0155)

5 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Mon, 14 Apr 2014 23:04:14 +0000 (16:04 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

Pull bmc2835 crypto fix from Herbert Xu:
 "This fixes a potential boot crash on bcm2835 due to the recent change
  that now causes hardware RNGs to be accessed on registration"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  hwrng: bcm2835 - fix oops when rng h/w is accessed during registration

5 years agouser namespace: fix incorrect memory barriers
Mikulas Patocka [Mon, 14 Apr 2014 20:58:55 +0000 (16:58 -0400)]
user namespace: fix incorrect memory barriers

smp_read_barrier_depends() can be used if there is data dependency between
the readers - i.e. if the read operation after the barrier uses address
that was obtained from the read operation before the barrier.

In this file, there is only control dependency, no data dependecy, so the
use of smp_read_barrier_depends() is incorrect. The code could fail in the
following way:
* the cpu predicts that idx < entries is true and starts executing the
  body of the for loop
* the cpu fetches map->extent[0].first and map->extent[0].count
* the cpu fetches map->nr_extents
* the cpu verifies that idx < extents is true, so it commits the
  instructions in the body of the for loop

The problem is that in this scenario, the cpu read map->extent[0].first
and map->nr_extents in the wrong order. We need a full read memory barrier
to prevent it.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
David S. Miller [Mon, 14 Apr 2014 23:00:10 +0000 (19:00 -0400)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains three Netfilter fixes for your net tree,
they are:

* Fix missing generation sequence initialization which results in a splat
  if lockdep is enabled, it was introduced in the recent works to improve
  nf_conntrack scalability, from Andrey Vagin.

* Don't flush the GRE keymap list in nf_conntrack when the pptp helper is
  disabled otherwise this crashes due to a double release, from Andrey
  Vagin.

* Fix nf_tables cmp fast in big endian, from Patrick McHardy.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: Start with correct mac_len in skb_network_protocol
Vlad Yasevich [Mon, 14 Apr 2014 21:37:26 +0000 (17:37 -0400)]
net: Start with correct mac_len in skb_network_protocol

Sometimes, when the packet arrives at skb_mac_gso_segment()
its skb->mac_len already accounts for some of the mac lenght
headers in the packet.  This seems to happen when forwarding
through and OpenSSL tunnel.

When we start looking for any vlan headers in skb_network_protocol()
we seem to ignore any of the already known mac headers and start
with an ETH_HLEN.  This results in an incorrect offset, dropped
TSO frames and general slowness of the connection.

We can start counting from the known skb->mac_len
and return at least that much if all mac level headers
are known and accounted for.

Fixes: 53d6471cef17262d3ad1c7ce8982a234244f68ec (net: Account for all vlan headers in skb_mac_gso_segment)
CC: Eric Dumazet <eric.dumazet@gmail.com>
CC: Daniel Borkman <dborkman@redhat.com>
Tested-by: Martin Filip <nexus+kernel@smoula.net>
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoKVM: x86: remove WARN_ON from get_kernel_ns()
Marcelo Tosatti [Thu, 10 Apr 2014 21:19:12 +0000 (18:19 -0300)]
KVM: x86: remove WARN_ON from get_kernel_ns()

Function and callers can be preempted.

https://bugzilla.kernel.org/show_bug.cgi?id=73721

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
5 years agoKVM: Rename variable smep to cr4_smep
Feng Wu [Tue, 1 Apr 2014 09:56:48 +0000 (17:56 +0800)]
KVM: Rename variable smep to cr4_smep

Rename variable smep to cr4_smep, which can better reflect the
meaning of the variable.

Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
5 years agoKVM: expose SMAP feature to guest
Feng Wu [Tue, 1 Apr 2014 09:46:36 +0000 (17:46 +0800)]
KVM: expose SMAP feature to guest

This patch exposes SMAP feature to guest

Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
5 years agoKVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode
Feng Wu [Tue, 1 Apr 2014 09:46:35 +0000 (17:46 +0800)]
KVM: Disable SMAP for guests in EPT realmode and EPT unpaging mode

SMAP is disabled if CPU is in non-paging mode in hardware.
However KVM always uses paging mode to emulate guest non-paging
mode with TDP. To emulate this behavior, SMAP needs to be
manually disabled when guest switches to non-paging mode.

Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
5 years agoKVM: Add SMAP support when setting CR4
Feng Wu [Tue, 1 Apr 2014 09:46:34 +0000 (17:46 +0800)]
KVM: Add SMAP support when setting CR4

This patch adds SMAP handling logic when setting CR4 for guests

Thanks a lot to Paolo Bonzini for his suggestion to use the branchless
way to detect SMAP violation.

Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
5 years agoKVM: Remove SMAP bit from CR4_RESERVED_BITS
Feng Wu [Tue, 1 Apr 2014 09:46:33 +0000 (17:46 +0800)]
KVM: Remove SMAP bit from CR4_RESERVED_BITS

This patch removes SMAP bit from CR4_RESERVED_BITS.

Signed-off-by: Feng Wu <feng.wu@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
5 years agoRevert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver...
Daniel Borkmann [Mon, 14 Apr 2014 19:45:17 +0000 (21:45 +0200)]
Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer"

This reverts commit ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management
to reflect real state of the receiver's buffer") as it introduced a
serious performance regression on SCTP over IPv4 and IPv6, though a not
as dramatic on the latter. Measurements are on 10Gbit/s with ixgbe NICs.

Current state:

[root@Lab200slot2 ~]# iperf3 --sctp -4 -c 192.168.241.3 -V -l 1452 -t 60
iperf version 3.0.1 (10 January 2014)
Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64
Time: Fri, 11 Apr 2014 17:56:21 GMT
Connecting to host 192.168.241.3, port 5201
      Cookie: Lab200slot2.1397238981.812898.548918
[  4] local 192.168.241.2 port 38616 connected to 192.168.241.3 port 5201
Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.09   sec  20.8 MBytes   161 Mbits/sec
[  4]   1.09-2.13   sec  10.8 MBytes  86.8 Mbits/sec
[  4]   2.13-3.15   sec  3.57 MBytes  29.5 Mbits/sec
[  4]   3.15-4.16   sec  4.33 MBytes  35.7 Mbits/sec
[  4]   4.16-6.21   sec  10.4 MBytes  42.7 Mbits/sec
[  4]   6.21-6.21   sec  0.00 Bytes    0.00 bits/sec
[  4]   6.21-7.35   sec  34.6 MBytes   253 Mbits/sec
[  4]   7.35-11.45  sec  22.0 MBytes  45.0 Mbits/sec
[  4]  11.45-11.45  sec  0.00 Bytes    0.00 bits/sec
[  4]  11.45-11.45  sec  0.00 Bytes    0.00 bits/sec
[  4]  11.45-11.45  sec  0.00 Bytes    0.00 bits/sec
[  4]  11.45-12.51  sec  16.0 MBytes   126 Mbits/sec
[  4]  12.51-13.59  sec  20.3 MBytes   158 Mbits/sec
[  4]  13.59-14.65  sec  13.4 MBytes   107 Mbits/sec
[  4]  14.65-16.79  sec  33.3 MBytes   130 Mbits/sec
[  4]  16.79-16.79  sec  0.00 Bytes    0.00 bits/sec
[  4]  16.79-17.82  sec  5.94 MBytes  48.7 Mbits/sec
(etc)

[root@Lab200slot2 ~]#  iperf3 --sctp -6 -c 2001:db8:0:f101::1 -V -l 1400 -t 60
iperf version 3.0.1 (10 January 2014)
Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64
Time: Fri, 11 Apr 2014 19:08:41 GMT
Connecting to host 2001:db8:0:f101::1, port 5201
      Cookie: Lab200slot2.1397243321.714295.2b3f7c
[  4] local 2001:db8:0:f101::2 port 55804 connected to 2001:db8:0:f101::1 port 5201
Starting Test: protocol: SCTP, 1 streams, 1400 byte blocks, omitting 0 seconds, 60 second test
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   169 MBytes  1.42 Gbits/sec
[  4]   1.00-2.00   sec   201 MBytes  1.69 Gbits/sec
[  4]   2.00-3.00   sec   188 MBytes  1.58 Gbits/sec
[  4]   3.00-4.00   sec   174 MBytes  1.46 Gbits/sec
[  4]   4.00-5.00   sec   165 MBytes  1.39 Gbits/sec
[  4]   5.00-6.00   sec   199 MBytes  1.67 Gbits/sec
[  4]   6.00-7.00   sec   163 MBytes  1.36 Gbits/sec
[  4]   7.00-8.00   sec   174 MBytes  1.46 Gbits/sec
[  4]   8.00-9.00   sec   193 MBytes  1.62 Gbits/sec
[  4]   9.00-10.00  sec   196 MBytes  1.65 Gbits/sec
[  4]  10.00-11.00  sec   157 MBytes  1.31 Gbits/sec
[  4]  11.00-12.00  sec   175 MBytes  1.47 Gbits/sec
[  4]  12.00-13.00  sec   192 MBytes  1.61 Gbits/sec
[  4]  13.00-14.00  sec   199 MBytes  1.67 Gbits/sec
(etc)

After patch:

[root@Lab200slot2 ~]#  iperf3 --sctp -4 -c 192.168.240.3 -V -l 1452 -t 60
iperf version 3.0.1 (10 January 2014)
Linux Lab200slot2 3.14.0+ #1 SMP Mon Apr 14 12:06:40 EDT 2014 x86_64
Time: Mon, 14 Apr 2014 16:40:48 GMT
Connecting to host 192.168.240.3, port 5201
      Cookie: Lab200slot2.1397493648.413274.65e131
[  4] local 192.168.240.2 port 50548 connected to 192.168.240.3 port 5201
Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test
[ ID] Interval           Transfer     Bandwidth
[  4]   0.00-1.00   sec   240 MBytes  2.02 Gbits/sec
[  4]   1.00-2.00   sec   239 MBytes  2.01 Gbits/sec
[  4]   2.00-3.00   sec   240 MBytes  2.01 Gbits/sec
[  4]   3.00-4.00   sec   239 MBytes  2.00 Gbits/sec
[  4]   4.00-5.00   sec   245 MBytes  2.05 Gbits/sec
[  4]   5.00-6.00   sec   240 MBytes  2.01 Gbits/sec
[  4]   6.00-7.00   sec   240 MBytes  2.02 Gbits/sec
[  4]   7.00-8.00   sec   239 MBytes  2.01 Gbits/sec

With the reverted patch applied, the SCTP/IPv4 performance is back
to normal on latest upstream for IPv4 and IPv6 and has same throughput
as 3.4.2 test kernel, steady and interval reports are smooth again.

Fixes: ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer")
Reported-by: Peter Butler <pbutler@sonusnet.com>
Reported-by: Dongsheng Song <dongsheng.song@gmail.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Peter Butler <pbutler@sonusnet.com>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nsn.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nsn.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agocxgb4: Save the correct mac addr for hw-loopback connections in the L2T
Steve Wise [Mon, 14 Apr 2014 19:22:43 +0000 (14:22 -0500)]
cxgb4: Save the correct mac addr for hw-loopback connections in the L2T

Hardware needs the local device mac address to support hw loopback for
rdma loopback connections.

Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_W
Daniel Borkmann [Mon, 14 Apr 2014 19:20:12 +0000 (21:20 +0200)]
net: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_W

While reviewing seccomp code, we found that BPF_S_ANC_SECCOMP_LD_W has
been wrongly decoded by commit a8fc927780 ("sk-filter: Add ability to
get socket filter program (v2)") into the opcode BPF_LD|BPF_B|BPF_ABS
although it should have been decoded as BPF_LD|BPF_W|BPF_ABS.

In practice, this should not have much side-effect though, as such
conversion is/was being done through prctl(2) PR_SET_SECCOMP. Reverse
operation PR_GET_SECCOMP will only return the current seccomp mode, but
not the filter itself. Since the transition to the new BPF infrastructure,
it's also not used anymore, so we can simply remove this as it's
unreachable.

Fixes: a8fc927780 ("sk-filter: Add ability to get socket filter program (v2)")
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoseccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF
Daniel Borkmann [Mon, 14 Apr 2014 19:02:59 +0000 (21:02 +0200)]
seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF

Linus reports that on 32-bit x86 Chromium throws the following seccomp
resp. audit log messages:

  audit: type=1326 audit(1397359304.356:28108): auid=500 uid=500
gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023
pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0
syscall=172 compat=0 ip=0xb2dd9852 code=0x30000

  audit: type=1326 audit(1397359304.356:28109): auid=500 uid=500
gid=500 ses=2 subj=unconfined_u:unconfined_r:chrome_sandbox_t:s0-s0:c0.c1023
pid=3677 comm="chrome" exe="/opt/google/chrome/chrome" sig=0 syscall=5
compat=0 ip=0xb2dd9852 code=0x50000

These audit messages are being triggered via audit_seccomp() through
__secure_computing() in seccomp mode (BPF) filter with seccomp return
codes 0x30000 (== SECCOMP_RET_TRAP) and 0x50000 (== SECCOMP_RET_ERRNO)
during filter runtime. Moreover, Linus reports that x86_64 Chromium
seems fine.

The underlying issue that explains this is that the implementation of
populate_seccomp_data() is wrong. Our seccomp data structure sd that
is being shared with user ABI is:

  struct seccomp_data {
    int nr;
    __u32 arch;
    __u64 instruction_pointer;
    __u64 args[6];
  };

Therefore, a simple cast to 'unsigned long *' for storing the value of
the syscall argument via syscall_get_arguments() is just wrong as on
32-bit x86 (or any other 32bit arch), it would result in storing a0-a5
at wrong offsets in args[] member, and thus i) could leak stack memory
to user space and ii) tampers with the logic of seccomp BPF programs
that read out and check for syscall arguments:

  syscall_get_arguments(task, regs, 0, 1, (unsigned long *) &sd->args[0]);

Tested on 32-bit x86 with Google Chrome, unfortunately only via remote
test machine through slow ssh X forwarding, but it fixes the issue on
my side. So fix it up by storing args in type correct variables, gcc
is clever and optimizes the copy away in other cases, e.g. x86_64.

Fixes: bd4cf0ed331a ("net: filter: rework/optimize internal BPF interpreter's instruction set")
Reported-and-bisected-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'qlcnic'
David S. Miller [Mon, 14 Apr 2014 17:43:58 +0000 (13:43 -0400)]
Merge branch 'qlcnic'

Shahed Shaikh says:

====================
qlcnic: Bug fixes

This patch series contains following bug fixes -

* Send INIT_NIC_FUNC mailbox command as first mailbox
* Fix a panic because of uninitialized delayed_work.
* Fix inconsistent calculation of max rings count.
* Fix PVID configuration issue. Driver needs to clear older
  PVID before adding new one.
* Fix QLogic application/driver interface by packing vNIC information
  array.
* Fix a crash when user tries to disable SR-IOV while VFs are
  still assigned to VMs.

Please apply to net.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoqlcnic: Do not disable SR-IOV when VFs are assigned to VMs
Manish Chopra [Mon, 14 Apr 2014 14:02:23 +0000 (10:02 -0400)]
qlcnic: Do not disable SR-IOV when VFs are assigned to VMs

o While disabling SR-IOV when VFs are assigned to VMs causes host crash
  so return -EPERM when user request to disable SR-IOV using pci sysfs in
  case of VFs are assigned to VMs.

Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoqlcnic: Fix QLogic application/driver interface for virtual NIC configuration
Jitendra Kalsaria [Mon, 14 Apr 2014 14:02:22 +0000 (10:02 -0400)]
qlcnic: Fix QLogic application/driver interface for virtual NIC configuration

o Application expect vNIC number as the array index but driver interface
return configuration in array index form.

o Pack the vNIC information array in the buffer such that application can
access it using vNIC number as the array index.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoqlcnic: Fix PVID configuration on eSwitch port.
Jitendra Kalsaria [Mon, 14 Apr 2014 14:02:21 +0000 (10:02 -0400)]
qlcnic: Fix PVID configuration on eSwitch port.

Clear older PVID before adding a newer PVID to the eSwicth port

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoqlcnic: Fix max ring count calculation
Shahed Shaikh [Mon, 14 Apr 2014 14:02:20 +0000 (10:02 -0400)]
qlcnic: Fix max ring count calculation

Do not read max rings count from qlcnic_get_nic_info(). Use driver defined
values for 82xx adapters. In case of 83xx adapters, use minimum of firmware
provided and driver defined values.

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoqlcnic: Fix to send INIT_NIC_FUNC as first mailbox.
Sucheta Chakraborty [Mon, 14 Apr 2014 14:02:19 +0000 (10:02 -0400)]
qlcnic: Fix to send INIT_NIC_FUNC as first mailbox.

o INIT_NIC_FUNC should be first mailbox sent. Sending DCB capability and
  parameter query commands after that command.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoqlcnic: Fix panic due to uninitialzed delayed_work struct in use.
Sucheta Chakraborty [Mon, 14 Apr 2014 14:02:18 +0000 (10:02 -0400)]
qlcnic: Fix panic due to uninitialzed delayed_work struct in use.

o AEN event was being received before initializing delayed_work struct
  and handlers for it. This was resulting in crash. This patch fixes it.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'be2net'
David S. Miller [Mon, 14 Apr 2014 17:41:42 +0000 (13:41 -0400)]
Merge branch 'be2net'

Sathya Perla says:

====================
be2net: patch set

Patch 1/2 is a v2 of a patch that was submitted earlier (as a part of a
different patch-set). v2 incorporates a suggestion given by David Laight
for how long to poll for pending TX completions while disabling a device.

Patch 2/2 fixes a crash in be_remove()->be_close()
path after be2net has aborted an EEH error recovery
due to a permanant failure.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agobe2net: Fix invocation of be_close() after be_clear()
Kalesh AP [Mon, 14 Apr 2014 10:42:41 +0000 (16:12 +0530)]
be2net: Fix invocation of be_close() after be_clear()

In the EEH error recovery path, when a permanent failure occurs,
we clean up adapter structure (i.e. destroy queues etc) by calling
be_clear() and return PCI_ERS_RESULT_DISCONNECT.
After this the stack tries to remove device from bus and calls
be_remove() which invokes netdev_unregister()->be_close().
be_close() operating on destroyed queues results in a
NULL dereference.

This patch fixes this problem by introducing a flag to keep track
of the setup state.

Signed-off-by: Kalesh AP <kalesh.purayil@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agobe2net: Fix to reap TX compls till HW doesn't respond for some time
Vasundhara Volam [Mon, 14 Apr 2014 10:42:40 +0000 (16:12 +0530)]
be2net: Fix to reap TX compls till HW doesn't respond for some time

be_close() currently waits for a max of 200ms to receive all pending
TX compls. This timeout value was roughly calculated based on 10G
transmission speeds and the TX queue depth. This timeout may not be
enough when the link is operating at lower speeds or in multi-channel/SR-IOV
configs with TX-rate limiting setting.

It is hard to calculate a "proper timeout value" that works in all
configurations.  This patch solves this problem by continuing to reap
TX completions till the HW is completely silent for a period of 10ms or
a HW error is detected.

v2: implements the new scheme (as suggested by David Laight) instead of
just waiting longer than 200ms for reaping all completions.

Signed-off-by: Vasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: Sathya Perla <sathya.perla@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/mlx4_core: Defer VF initialization till PF is fully initialized
Amir Vadai [Mon, 14 Apr 2014 08:17:22 +0000 (11:17 +0300)]
net/mlx4_core: Defer VF initialization till PF is fully initialized

Fix in commit [1] is not sufficient since a deferred VF initialization
could happen after pci_enable_sriov() is finished, but before the PF is
fully initialized.
Need to prevent VFs from initializing till the PF is fully ready and
comm channel is operational.

[1] - 9798935 "net/mlx4_core: mlx4_init_slave() shouldn't access comm
      channel before PF is ready"

CC: Stuart Hayes <Stuart_Hayes@Dell.com>
Signed-off-by: Amir Vadai <amirv@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agobnx2: Don't build unused suspend/resume functions not enabled
Daniel J Blueman [Fri, 11 Apr 2014 08:14:26 +0000 (16:14 +0800)]
bnx2: Don't build unused suspend/resume functions not enabled

When CONFIG_PM_SLEEP isn't enabled, bnx2_suspend/resume are unused; don't
build them when they aren't used.

Signed-off-by: Daniel J Blueman <daniel@quora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoipv6: Limit mtu to 65575 bytes
Eric Dumazet [Fri, 11 Apr 2014 04:23:36 +0000 (21:23 -0700)]
ipv6: Limit mtu to 65575 bytes

Francois reported that setting big mtu on loopback device could prevent
tcp sessions making progress.

We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets.

We must limit the IPv6 MTU to (65535 + 40) bytes in theory.

Tested:

ifconfig lo mtu 70000
netperf -H ::1

Before patch : Throughput :   0.05 Mbits

After patch : Throughput : 35484 Mbits

Reported-by: Francois WELLENREITER <f.wellenreiter@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoMerge branch 'perf-core-for-mingo' into perf/urgent
Ingo Molnar [Mon, 14 Apr 2014 14:45:39 +0000 (16:45 +0200)]
Merge branch 'perf-core-for-mingo' into perf/urgent

Conflicts:
tools/perf/bench/numa.c

Pull perf fixes from Jiri Olsa.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
5 years agoMerge tag 'v3.15-rc1' into perf/urgent
Ingo Molnar [Mon, 14 Apr 2014 14:44:42 +0000 (16:44 +0200)]
Merge tag 'v3.15-rc1' into perf/urgent

Pick up the latest fixes.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
5 years agoOMAPDSS: Change struct reg_field to dispc_reg_field
Jyri Sarha [Fri, 11 Apr 2014 13:25:06 +0000 (16:25 +0300)]
OMAPDSS: Change struct reg_field to dispc_reg_field

Avoid colision with regmap's struct reg_field definition by renaming
omapdss's struct reg_field to dispc_reg_field, and moving it inside
dispc.c as that's the only place it is used.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
5 years agoOMAPDSS: Take pixelclock unit change into account in hdmi_compute_acr()
Jyri Sarha [Fri, 11 Apr 2014 13:25:07 +0000 (16:25 +0300)]
OMAPDSS: Take pixelclock unit change into account in hdmi_compute_acr()

Pixelclock unit change from kHz to Hz should be taken into account
in CTS value calculations in hdmi_compute_acr().

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
5 years agoOMAPDSS: fix shared irq handlers
Tomi Valkeinen [Fri, 11 Apr 2014 10:49:55 +0000 (13:49 +0300)]
OMAPDSS: fix shared irq handlers

DSS uses shared irq handlers for DISPC and DSI, because on OMAP3, the
DISPC and DSI share the same irq line.

However, the irq handlers presume that the hardware is enabled, which,
in theory, may not be the case with shared irq handlers. So if an
interrupt happens while the DISPC/DSI is off, the kernel will halt as
the irq handler tries to access the DISPC/DSI registers.

In practice that should never happen, as both DSI and DISPC are in the
same power domain. So if there's an IRQ for one of them, the other is
also enabled. However, if CONFIG_DEBUG_SHIRQ is enabled, the kernel will
generate a spurious IRQ, which then causes the problem.

This patch adds an is_enabled field for both DISPC and DSI, which is
used to track if the HW is enabled. For DISPC the code is slightly more
complex, as the users of DISPC can register the interrupt handler, and
we want to hide the is_enabled handling from the users of DISPC.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
5 years agovideo: imxfb: Select LCD_CLASS_DEVICE unconditionally
Alexander Shiyan [Thu, 20 Mar 2014 06:58:31 +0000 (10:58 +0400)]
video: imxfb: Select LCD_CLASS_DEVICE unconditionally

FB driver uses lowlevel controls for LCD powering and contrast changing.
Since LCD class cannot be used as an optional feature and should be
compiled for using in the driver, this patch selects LCD_CLASS_DEVICE
symbol for the driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
5 years agoOMAPDSS: fix rounding when calculating fclk rate
Tomi Valkeinen [Thu, 13 Feb 2014 09:36:22 +0000 (11:36 +0200)]
OMAPDSS: fix rounding when calculating fclk rate

"clk: divider: fix rate calculation for fractional rates" patch (and
similar for TI specific divider) fixes the clk-divider's rounding. This
patch updates the DSS driver to round the rates accordingly.

This fixes the DSS's warnings about clock rate mismatch, and also fixes
the wrong fclk rate being set.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
5 years agovideo: da8xx-fb: Fix casting of info->pseudo_palette
Jon Ringle [Tue, 1 Apr 2014 12:39:34 +0000 (08:39 -0400)]
video: da8xx-fb: Fix casting of info->pseudo_palette

The casting to (u16 *) on info->pseudo_palette is wrong and causes the
display to show a blue (garbage) vertical line on every other pixel column

Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
5 years agoMerge branch 'liblockdep-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Mon, 14 Apr 2014 11:22:46 +0000 (13:22 +0200)]
Merge branch 'liblockdep-fixes' of git://git./linux/kernel/git/sashal/linux into core/urgent

Pull liblockdep fixes from Sasha Levin:

 " 1. There was a build breakage caused by marking a function 'asmlinkage'
   in lockdep.h. Fix that by ignoring asmlinkage and visible annotations.

   2. Josh Boyer mentioned that Fedora would like to include liblockdep
   as a package, so we had to fix our versioning methods from being dumb
   and pointless to something actually usable. So now liblockdep.so tracks
   the kernel version which makes lives of distro folks much easier. "

Signed-off-by: Ingo Molnar <mingo@kernel.org>
5 years agoperf stat: Initialize statistics correctly
Andi Kleen [Tue, 25 Mar 2014 17:31:38 +0000 (10:31 -0700)]
perf stat: Initialize statistics correctly

perf stat did initialize the stats structure used to compute
stddev etc. incorrectly. It merely zeroes it. But one member
(min) needs to be set to a non zero value. This causes min
to be not computed at all. Call init_stats() correctly.

It doesn't matter for stat currently because it doesn't use
min, but it's still better to do it correctly.

The other users of statistics are already correct.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1395768699-16060-1-git-send-email-andi@firstfloor.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf bench: Set more defaults in the 'numa' suite
Ramkumar Ramachandra [Thu, 27 Mar 2014 23:50:17 +0000 (19:50 -0400)]
perf bench: Set more defaults in the 'numa' suite

Currently,

  $ perf bench numa mem

errors out with usage information. To make this more user-friendly, let
us provide a minimum set of default values required for a test
run. As an added bonus,

  $ perf bench all

now goes all the way to completion.

Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395964219-22173-2-git-send-email-artagnon@gmail.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf bench: Fix segfault at the end of an 'all' execution
Ramkumar Ramachandra [Thu, 27 Mar 2014 23:50:19 +0000 (19:50 -0400)]
perf bench: Fix segfault at the end of an 'all' execution

At the end of

  $ perf bench all

the program segfaults because it attempts to dereference a NULL
pointer. Fix this fault.

Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395964219-22173-4-git-send-email-artagnon@gmail.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf bench: Update manpage to mention numa and futex
Ramkumar Ramachandra [Thu, 27 Mar 2014 23:50:18 +0000 (19:50 -0400)]
perf bench: Update manpage to mention numa and futex

Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395964219-22173-3-git-send-email-artagnon@gmail.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf probe: Use dwarf_getcfi_elf() instead of dwarf_getcfi()
Namhyung Kim [Mon, 7 Apr 2014 07:05:48 +0000 (16:05 +0900)]
perf probe: Use dwarf_getcfi_elf() instead of dwarf_getcfi()

The dwarf_getcfi() only checks .debug_frame section for CFI, but as
most binaries only have .eh_frame it'd return NULL and it makes
some variables inaccessible.

Using dwarf_getcfi_elf (along with dwarf_getelf()) allows to show and
add probe to more variables.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1396854348-9296-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf probe: Fix to handle errors in line_range searching
Masami Hiramatsu [Wed, 2 Apr 2014 05:48:31 +0000 (14:48 +0900)]
perf probe: Fix to handle errors in line_range searching

As Namhyung reported(https://lkml.org/lkml/2014/4/1/89),
current perf-probe -L option doesn't handle errors in line-range
searching correctly. It causes a SEGV if an error occured in the
line-range searching.

  ----
  $ perf probe -x ./perf -v -L map__load
  Open Debuginfo file: /home/namhyung/project/linux/tools/perf/perf
  fname: util/map.c, lineno:153
  New line range: 153 to 2147483647
  path: (null)
  Segmentation fault (core dumped)
  ----

This is because line_range_inline_cb() ignores errors
from find_line_range_by_line() which means that lr->path is
already freed on the error path in find_line_range_by_line().
As a result, get_real_path() accesses the lr->path and it
causes a NULL pointer exception.

This fixes line_range_inline_cb() to handle the error correctly,
and report it to the caller.

Anyway, this just fixes a possible SEGV bug, Namhyung's patch
is also required.

Reported-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20140402054831.19080.27006.stgit@ltc230.yrl.intra.hitachi.co.jp
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf probe: Fix --line option behavior
Namhyung Kim [Tue, 1 Apr 2014 04:47:57 +0000 (13:47 +0900)]
perf probe: Fix --line option behavior

The commit 5a62257a3ddd1 ("perf probe: Replace line_list with
intlist") replaced line_list to intlist but it has a problem that if a
same line was added again, it'd return -EEXIST rather than 1.

Since line_range_walk_cb() only checks the result being negative, it
resulted in failure or segfault sometimes.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Link: http://lkml.kernel.org/r/1396327677-3657-1-git-send-email-namhyung@kernel.org
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf tools: Pick up libdw without explicit LIBDW_DIR
Ramkumar Ramachandra [Wed, 26 Mar 2014 22:44:05 +0000 (18:44 -0400)]
perf tools: Pick up libdw without explicit LIBDW_DIR

The Makefile logic sets FEATURE_CHECKS_CFLAGS-libdw-dwarf-unwind and
FEATURE_CHECKS_LDFLAGS-libdw-dwarf-unwind only if LIBDW_DIR is
defined. This means that under a normal setup,

  $ make NO_LIBUNWIND=1

won't automatically pick up libdw. Fix this.

Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Acked-by: Jean Pihet <jean.pihet@linaro.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1395873845-466-1-git-send-email-artagnon@gmail.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoMAINTAINERS: Change e-mail to kernel.org one
Arnaldo Carvalho de Melo [Thu, 27 Mar 2014 20:36:14 +0000 (17:36 -0300)]
MAINTAINERS: Change e-mail to kernel.org one

Leaving ghostprotocols.net for old networking stuff.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-jott6d40nkjjc3vvh3vw53lp@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf callchains: Disable unwind libraries when libelf isn't found
Arnaldo Carvalho de Melo [Tue, 25 Mar 2014 12:35:11 +0000 (09:35 -0300)]
perf callchains: Disable unwind libraries when libelf isn't found

I.e. do the same as when NO_LIBELF is explicitely passed in the 'make'
command line, fixing this:

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...     DWARF post unwind library: libdw
<SNIP>
    CC       /tmp/build/perf/util/symbol-minimal.o
    CC       /tmp/build/perf/util/unwind-libdw.o
  arch/x86/util/unwind-libdw.c:1:30: fatal error: elfutils/libdwfl.h: No such file or directory
  compilation terminated.
    CC       /tmp/build/perf/tests/keep-tracking.o
  util/unwind-libdw.c:2:28: fatal error: elfutils/libdw.h: No such file or directory
  compilation terminated.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-e39j1yxanltjx4t0msse63ax@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agotools lib traceevent: Do not call warning() directly
Namhyung Kim [Wed, 19 Mar 2014 01:22:54 +0000 (10:22 +0900)]
tools lib traceevent: Do not call warning() directly

The patch 3a3ffa2e82205 ("tools lib traceevent: Report better error
message on bad function args") added the error message but it seems
there's no reason to call warning() directly.

So change it to do_warning_event() to provide event information too.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1395192174-26273-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agotools lib traceevent: Print event name when show warning if possible
Namhyung Kim [Wed, 19 Mar 2014 01:22:53 +0000 (10:22 +0900)]
tools lib traceevent: Print event name when show warning if possible

It's sometimes useful to know where the parse failure was occurred.  Add
do_warning_event() macro to see the failing event.

It now shows the messages like below:

  $ perf test 5
   5: parse events tests                                     :  Warning: [kvmmmu:kvm_mmu_get_page] bad op token {
    Warning: [kvmmmu:kvm_mmu_sync_page] bad op token {
    Warning: [kvmmmu:kvm_mmu_unsync_page] bad op token {
    Warning: [kvmmmu:kvm_mmu_prepare_zap_page] bad op token {
    Warning: [kvmmmu:fast_page_fault] function is_writable_pte not defined
    Warning: [xen:xen_mmu_ptep_modify_prot_commit] function sizeof not defined
    Warning: [xen:xen_mmu_ptep_modify_prot_start] function sizeof not defined
    Warning: [xen:xen_mmu_set_pgd] function sizeof not defined
    Warning: [xen:xen_mmu_set_pud] function sizeof not defined
    Warning: [xen:xen_mmu_set_pmd] function sizeof not defined
    ...

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ramkumar Ramachandra <artagnon@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1395192174-26273-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agoperf top: Fix documentation of invalid -s option
Namhyung Kim [Wed, 19 Mar 2014 01:46:18 +0000 (10:46 +0900)]
perf top: Fix documentation of invalid -s option

On perf top, the -s option is used for --sort, but the man page
contains invalid documentation of -s option for --sym-annotate.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1395193578-27098-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
5 years agox86/build: Supress "Nothing to be done for ..." messages
Masahiro Yamada [Thu, 10 Apr 2014 01:35:42 +0000 (10:35 +0900)]
x86/build: Supress "Nothing to be done for ..." messages

When we build an already built kernel again, arch/x86/syscalls/Makefile
and arch/x86/tools/Makefile emits "Nothing to be done for ..."
messages.

Here is the command log:

  $ make defconfig
     [ snip ]
  $ make
     [ snip ]
  $ make
  make[1]: Nothing to be done for `all'.            <-----
  make[1]: Nothing to be done for `relocs'.         <-----
    CHK     include/config/kernel.release
    CHK     include/generated/uapi/linux/version.h

Besides not emitting those, "all" and "relocs" should be added to PHONY as well.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Acked-by: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/1397093742-11144-1-git-send-email-yamada.m@jp.panasonic.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
5 years agonetfilter: nf_tables: fix nft_cmp_fast failure on big endian for size < 4
Patrick McHardy [Sat, 12 Apr 2014 11:17:57 +0000 (13:17 +0200)]
netfilter: nf_tables: fix nft_cmp_fast failure on big endian for size < 4

nft_cmp_fast is used for equality comparisions of size <= 4. For
comparisions of size < 4 byte a mask is calculated that is applied to
both the data from userspace (during initialization) and the register
value (during runtime). Both values are stored using (in effect) memcpy
to a memory area that is then interpreted as u32 by nft_cmp_fast.

This works fine on little endian since smaller types have the same base
address, however on big endian this is not true and the smaller types
are interpreted as a big number with trailing zero bytes.

The mask therefore must not include the lower bytes, but the higher bytes
on big endian. Add a helper function that does a cpu_to_le32 to switch
the bytes on big endian. Since we're dealing with a mask of just consequitive
bits, this works out fine.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
5 years agonetfilter: nf_conntrack: initialize net.ct.generation
Andrey Vagin [Fri, 11 Apr 2014 17:34:20 +0000 (21:34 +0400)]
netfilter: nf_conntrack: initialize net.ct.generation

[  251.920788] INFO: trying to register non-static key.
[  251.921386] the code is fine but needs lockdep annotation.
[  251.921386] turning off the locking correctness validator.
[  251.921386] CPU: 2 PID: 15715 Comm: socket_listen Not tainted 3.14.0+ #294
[  251.921386] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[  251.921386]  0000000000000000 000000009d18c210 ffff880075f039b8 ffffffff816b7ecd
[  251.921386]  ffffffff822c3b10 ffff880075f039c8 ffffffff816b36f4 ffff880075f03aa0
[  251.921386]  ffffffff810c65ff ffffffff810c4a85 00000000fffffe01 ffffffffa0075172
[  251.921386] Call Trace:
[  251.921386]  [<ffffffff816b7ecd>] dump_stack+0x45/0x56
[  251.921386]  [<ffffffff816b36f4>] register_lock_class.part.24+0x38/0x3c
[  251.921386]  [<ffffffff810c65ff>] __lock_acquire+0x168f/0x1b40
[  251.921386]  [<ffffffff810c4a85>] ? trace_hardirqs_on_caller+0x105/0x1d0
[  251.921386]  [<ffffffffa0075172>] ? nf_nat_setup_info+0x252/0x3a0 [nf_nat]
[  251.921386]  [<ffffffff816c1215>] ? _raw_spin_unlock_bh+0x35/0x40
[  251.921386]  [<ffffffffa0075172>] ? nf_nat_setup_info+0x252/0x3a0 [nf_nat]
[  251.921386]  [<ffffffff810c7272>] lock_acquire+0xa2/0x120
[  251.921386]  [<ffffffffa008ab90>] ? ipv4_confirm+0x90/0xf0 [nf_conntrack_ipv4]
[  251.921386]  [<ffffffffa0055989>] __nf_conntrack_confirm+0x129/0x410 [nf_conntrack]
[  251.921386]  [<ffffffffa008ab90>] ? ipv4_confirm+0x90/0xf0 [nf_conntrack_ipv4]
[  251.921386]  [<ffffffffa008ab90>] ipv4_confirm+0x90/0xf0 [nf_conntrack_ipv4]
[  251.921386]  [<ffffffff815e7b00>] ? ip_fragment+0x9f0/0x9f0
[  251.921386]  [<ffffffff815d8c5a>] nf_iterate+0xaa/0xc0
[  251.921386]  [<ffffffff815e7b00>] ? ip_fragment+0x9f0/0x9f0
[  251.921386]  [<ffffffff815d8d14>] nf_hook_slow+0xa4/0x190
[  251.921386]  [<ffffffff815e7b00>] ? ip_fragment+0x9f0/0x9f0
[  251.921386]  [<ffffffff815e98f2>] ip_output+0x92/0x100
[  251.921386]  [<ffffffff815e8df9>] ip_local_out+0x29/0x90
[  251.921386]  [<ffffffff815e9240>] ip_queue_xmit+0x170/0x4c0
[  251.921386]  [<ffffffff815e90d5>] ? ip_queue_xmit+0x5/0x4c0
[  251.921386]  [<ffffffff81601208>] tcp_transmit_skb+0x498/0x960
[  251.921386]  [<ffffffff81602d82>] tcp_connect+0x812/0x960
[  251.921386]  [<ffffffff810e3dc5>] ? ktime_get_real+0x25/0x70
[  251.921386]  [<ffffffff8159ea2a>] ? secure_tcp_sequence_number+0x6a/0xc0
[  251.921386]  [<ffffffff81606f57>] tcp_v4_connect+0x317/0x470
[  251.921386]  [<ffffffff8161f645>] __inet_stream_connect+0xb5/0x330
[  251.921386]  [<ffffffff8158dfc3>] ? lock_sock_nested+0x33/0xa0
[  251.921386]  [<ffffffff810c4b5d>] ? trace_hardirqs_on+0xd/0x10
[  251.921386]  [<ffffffff81078885>] ? __local_bh_enable_ip+0x75/0xe0
[  251.921386]  [<ffffffff8161f8f8>] inet_stream_connect+0x38/0x50
[  251.921386]  [<ffffffff8158b157>] SYSC_connect+0xe7/0x120
[  251.921386]  [<ffffffff810e3789>] ? current_kernel_time+0x69/0xd0
[  251.921386]  [<ffffffff810c4a85>] ? trace_hardirqs_on_caller+0x105/0x1d0
[  251.921386]  [<ffffffff810c4b5d>] ? trace_hardirqs_on+0xd/0x10
[  251.921386]  [<ffffffff8158c36e>] SyS_connect+0xe/0x10
[  251.921386]  [<ffffffff816caf69>] system_call_fastpath+0x16/0x1b
[  312.014104] INFO: rcu_sched detected stalls on CPUs/tasks: {} (detected by 0, t=60003 jiffies, g=42359, c=42358, q=333)
[  312.015097] INFO: Stall ended before state dump start

Fixes: 93bb0ceb75be ("netfilter: conntrack: remove central spinlock nf_conntrack_lock")
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Patrick McHardy <kaber@trash.net>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
5 years agopinctrl: fix typo in bindings documentation
Sherman Yin [Wed, 2 Apr 2014 22:40:39 +0000 (15:40 -0700)]
pinctrl: fix typo in bindings documentation

Fixed the missing comma in DT node example.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agoUpdate bcm_defconfig with new pinctrl CONFIG
Sherman Yin [Wed, 2 Apr 2014 22:40:38 +0000 (15:40 -0700)]
Update bcm_defconfig with new pinctrl CONFIG

To be consistent with other Broadcom drivers, the Broadcom Capri pinctrl
driver and its related CONFIG option are renamed to bcm281xx.

This commit updates the defconfig that enables the pinctrl driver.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Matt Porter <mporter@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agopinctrl: Rename Broadcom Capri pinctrl driver
Sherman Yin [Wed, 2 Apr 2014 22:40:37 +0000 (15:40 -0700)]
pinctrl: Rename Broadcom Capri pinctrl driver

To be consistent with other Broadcom drivers, the Broadcom Capri pinctrl
driver and its related CONFIG option are renamed to bcm281xx.

Devicetree compatible string and binding documentation use
"brcm,bcm11351-pinctrl" to match the machine binding here:
Documentation/devicetree/bindings/arm/bcm/bcm11351.txt

This driver supports pinctrl on BCM11130, BCM11140, BCM11351, BCM28145
and BCM28155 SoCs.

Signed-off-by: Sherman Yin <syin@broadcom.com>
Reviewed-by: Matt Porter <mporter@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agopinctrl: msm: Correct interrupt code for TLMM v2
Bjorn Andersson [Mon, 31 Mar 2014 21:49:54 +0000 (14:49 -0700)]
pinctrl: msm: Correct interrupt code for TLMM v2

Acking interrupts are done differently between on v2 and v3, so add an extra
attribute to the pingroup struct to let the platform definitions control this.
Also make sure to start dual edge detection by detecting the rising edge.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agopinctrl: nomadik: delete stray debug print
Linus Walleij [Wed, 9 Apr 2014 07:18:18 +0000 (09:18 +0200)]
pinctrl: nomadik: delete stray debug print

I left this in by mistake, get rid of it.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agopinctrl: rockchip: handle first half of rk3188-bank0 correctly
Heiko Stübner [Tue, 25 Mar 2014 23:57:52 +0000 (00:57 +0100)]
pinctrl: rockchip: handle first half of rk3188-bank0 correctly

The first half of pinbank 0 only has one muxing function (as gpios) and
does not have a special mux-register.

Therefore ensure that no other mux function can be selected and also do not
write to a non-existent register.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agopinctrl: rockchip: add return value to rockchip_set_mux
Heiko Stübner [Tue, 25 Mar 2014 23:57:00 +0000 (00:57 +0100)]
pinctrl: rockchip: add return value to rockchip_set_mux

In a following change, rockchip_set_mux gets the possibility to fail.
Therefore add a return value to it and honor error codes in functions
using rockchip_set_mux.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agopinctrl: rockchip: fix offset of mux registers for rk3188
Beniamino Galvani [Mon, 24 Mar 2014 22:36:01 +0000 (23:36 +0100)]
pinctrl: rockchip: fix offset of mux registers for rk3188

The correct value of .mux_offset for rk3188 seems to be 0x60
instead of 0x68.

Heiko adds:

GPIO0 only has the second two IOMUX registers:
- GRF_GPIO0C_IOMUX at 0x68
- GRF_GPIO0D_IOMUX at 0x6c
which I guess is where my mistake comes from.

It looks like there does no iomux register exist at all
for the first 16 pins.

In any case, the current number is wrong, and the 0x60
offset is the correct one, but I guess we need to
determine what the affected pins do - do they always have a
gpio mux or such?

Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
5 years agox86/gpu: Fix sign extension issue in Intel graphics stolen memory quirks
Ville Syrjälä [Sun, 13 Apr 2014 09:45:03 +0000 (12:45 +0300)]
x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirks

Have the KB(),MB(),GB() macros produce unsigned longs to avoid
unintended sign extension issues with the gen2 memory size
detection.

What happens is first the uint8_t returned by
read_pci_config_byte() gets promoted to an int which gets
multiplied by another int from the MB() macro, and finally the
result gets sign extended to size_t.

Although this shouldn't be a problem in practice as all affected
gen2 platforms are 32bit AFAIK, so size_t will be 32 bits.

Reported-by: Bjorn Helgaas <bhelgaas@google.com>
Suggested-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1397382303-17525-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
5 years agox86/platform: Fix "make O=dir kvmconfig"
Antonio Borneo [Sun, 13 Apr 2014 08:26:08 +0000 (16:26 +0800)]
x86/platform: Fix "make O=dir kvmconfig"

Running:

make O=dir x86_64_defconfig
make O=dir kvmconfig

the second command dirties the source tree with file ".config",
symlink "source" and objects in folder "scripts".

Fixed by using properly prefixed paths in the arch Makefile.

Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
Acked-by: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Link: http://lkml.kernel.org/r/1397377568-8375-1-git-send-email-borneo.antonio@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
5 years agofilter: prevent nla extensions to peek beyond the end of the message
Mathias Krause [Sun, 13 Apr 2014 16:23:33 +0000 (18:23 +0200)]
filter: prevent nla extensions to peek beyond the end of the message

The BPF_S_ANC_NLATTR and BPF_S_ANC_NLATTR_NEST extensions fail to check
for a minimal message length before testing the supplied offset to be
within the bounds of the message. This allows the subtraction of the nla
header to underflow and therefore -- as the data type is unsigned --
allowing far to big offset and length values for the search of the
netlink attribute.

The remainder calculation for the BPF_S_ANC_NLATTR_NEST extension is
also wrong. It has the minuend and subtrahend mixed up, therefore
calculates a huge length value, allowing to overrun the end of the
message while looking for the netlink attribute.

The following three BPF snippets will trigger the bugs when attached to
a UNIX datagram socket and parsing a message with length 1, 2 or 3.

 ,-[ PoC for missing size check in BPF_S_ANC_NLATTR ]--
 | ld #0x87654321
 | ldx #42
 | ld #nla
 | ret a
 `---

 ,-[ PoC for the same bug in BPF_S_ANC_NLATTR_NEST ]--
 | ld #0x87654321
 | ldx #42
 | ld #nlan
 | ret a
 `---

 ,-[ PoC for wrong remainder calculation in BPF_S_ANC_NLATTR_NEST ]--
 | ; (needs a fake netlink header at offset 0)
 | ld #0
 | ldx #42
 | ld #nlan
 | ret a
 `---

Fix the first issue by ensuring the message length fulfills the minimal
size constrains of a nla header. Fix the second bug by getting the math
for the remainder calculation right.

Fixes: 4738c1db15 ("[SKFILTER]: Add SKF_ADF_NLATTR instruction")
Fixes: d214c7537b ("filter: add SKF_AD_NLATTR_NEST to look for nested..")
Cc: Patrick McHardy <kaber@trash.net>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoipv4: return valid RTA_IIF on ip route get
Julian Anastasov [Sun, 13 Apr 2014 15:08:02 +0000 (18:08 +0300)]
ipv4: return valid RTA_IIF on ip route get

Extend commit 13378cad02afc2adc6c0e07fca03903c7ada0b37
("ipv4: Change rt->rt_iif encoding.") from 3.6 to return valid
RTA_IIF on 'ip route get ... iif DEVICE' instead of rt_iif 0
which is displayed as 'iif *'.

inet_iif is not appropriate to use because skb_iif is not set.
Use the skb->dev->ifindex instead.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoRevert "net: mvneta: fix usage as a module on RGMII configurations"
Thomas Petazzoni [Sun, 13 Apr 2014 09:15:33 +0000 (11:15 +0200)]
Revert "net: mvneta: fix usage as a module on RGMII configurations"

This reverts commit e3a8786c10e75903f1269474e21fe8cb49c3a670. While
this commit allows to use the mvneta driver as a module on some
configurations, it breaks other configurations even if mvneta is used
built-in.

This breakage is due to the fact that on some RGMII platforms, the PCS
bit has to be set, and on some other platforms, it has to be
cleared. At the moment, we lack informations to know exactly the
significance of this bit (the datasheet only says "enables PCS"), and
so we can't produce a patch that will work on all platforms at this
point. And since this change is breaking the network completely for
many users, it's much better to revert it for now. We'll come back
later with a proper fix that takes into account all platforms.

Basically:

 * Armada XP GP is configured as RGMII-ID, and needs the PCS bit to be
   set.
 * Armada 370 Mirabox is configured as RGMII-ID, and needs the PCS bit
   to be cleared.

And at the moment, we don't know how to make the distinction between
those two cases. One hint is that the Armada XP GP appears in fact to
be using a QSGMII connection with the PHY (Quad-SGMII), but
configuring it as SGMII doesn't work, while RGMII-ID works. This needs
more investigation, but in the mean time, let's unbreak the network
for all those users.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Arnaud Ebalard <arno@natisbad.org>
Reported-by: Alexander Reuter <Alexander.Reuter@gmx.net>
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=73401
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()
Wei Yang [Mon, 14 Apr 2014 01:51:19 +0000 (09:51 +0800)]
net/mlx4_core: Preserve pci_dev_data after __mlx4_remove_one()

pci_match_id() just match the static pci_device_id, which may return NULL if
someone binds the driver to a device manually using
/sys/bus/pci/drivers/.../new_id.

This patch wrap up a helper function __mlx4_remove_one() which does the tear
down function but preserve the drv_data. Functions like
mlx4_pci_err_detected() and mlx4_restart_one() will call this one with out
releasing drvdata.

Fixes: 97a5221 "net/mlx4_core: pass pci_device_id.driver_data to __mlx4_init_one during reset".

CC: Bjorn Helgaas <bhelgaas@google.com>
CC: Amir Vadai <amirv@mellanox.com>
CC: Jack Morgenstein <jackm@dev.mellanox.co.il>
CC: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Wei Yang <weiyang@linux.vnet.ibm.com>
Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agonet: ipv4: current group_info should be put after using.
Wang, Xiaoming [Mon, 14 Apr 2014 16:30:45 +0000 (12:30 -0400)]
net: ipv4: current group_info should be put after using.

Plug a group_info refcount leak in ping_init.
group_info is only needed during initialization and
the code failed to release the reference on exit.
While here move grabbing the reference to a place
where it is actually needed.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Zhang Dongxing <dongxing.zhang@intel.com>
Signed-off-by: xiaoming wang <xiaoming.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
5 years agoLinux 3.15-rc1 v3.15-rc1
Linus Torvalds [Sun, 13 Apr 2014 21:18:35 +0000 (14:18 -0700)]
Linux 3.15-rc1

5 years agomm: Initialize error in shmem_file_aio_read()
Geert Uytterhoeven [Sun, 13 Apr 2014 18:46:22 +0000 (20:46 +0200)]
mm: Initialize error in shmem_file_aio_read()

Some versions of gcc even warn about it:

  mm/shmem.c: In function ‘shmem_file_aio_read’:
  mm/shmem.c:1414: warning: ‘error’ may be used uninitialized in this function

If the loop is aborted during the first iteration by one of the two
first break statements, error will be uninitialized.

Introduced by commit 6e58e79db8a1 ("introduce copy_page_to_iter, kill
loop over iovec in generic_file_aio_read()").

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agocifs: Use min_t() when comparing "size_t" and "unsigned long"
Geert Uytterhoeven [Sun, 13 Apr 2014 18:46:21 +0000 (20:46 +0200)]
cifs: Use min_t() when comparing "size_t" and "unsigned long"

On 32 bit, size_t is "unsigned int", not "unsigned long", causing the
following warning when comparing with PAGE_SIZE, which is always "unsigned
long":

  fs/cifs/file.c: In function ‘cifs_readdata_to_iov’:
  fs/cifs/file.c:2757: warning: comparison of distinct pointer types lacks a cast

Introduced by commit 7f25bba819a3 ("cifs_iovec_read: keep iov_iter
between the calls of cifs_readdata_to_iov()"), which changed the
signedness of "remaining" and the code from min_t() to min().

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMerge branch 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Sun, 13 Apr 2014 20:28:13 +0000 (13:28 -0700)]
Merge branch 'slab/next' of git://git./linux/kernel/git/penberg/linux

Pull slab changes from Pekka Enberg:
 "The biggest change is byte-sized freelist indices which reduces slab
  freelist memory usage:

    https://lkml.org/lkml/2013/12/2/64"

* 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux:
  mm: slab/slub: use page->list consistently instead of page->lru
  mm/slab.c: cleanup outdated comments and unify variables naming
  slab: fix wrongly used macro
  slub: fix high order page allocation problem with __GFP_NOFAIL
  slab: Make allocations with GFP_ZERO slightly more efficient
  slab: make more slab management structure off the slab
  slab: introduce byte sized index for the freelist of a slab
  slab: restrict the number of objects in a slab
  slab: introduce helper functions to get/set free object
  slab: factor out calculate nr objects in cache_estimate

5 years agoMerge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Linus Torvalds [Sun, 13 Apr 2014 01:22:27 +0000 (18:22 -0700)]
Merge branch 'misc' of git://git./linux/kernel/git/mmarek/kbuild

Pull misc kbuild changes from Michal Marek:
 "Here is the non-critical part of kbuild:
   - One bogus coccinelle check removed, one check fixed not to suggest
     the obsolete PTR_RET macro
   - scripts/tags.sh does not index the generated *.mod.c files
   - new objdiff tool to list differences between two versions of an
     object file
   - A fix for scripts/bootgraph.pl"

* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scripts/coccinelle: Use PTR_ERR_OR_ZERO
  scripts/bootgraph.pl: Add graphic header
  scripts: objdiff: detect object code changes between two commits
  Coccicheck: Remove memcpy to struct assignment test
  scripts/tags.sh: Ignore *.mod.c

5 years agosym53c8xx_2: Set DID_REQUEUE return code when aborting squeue
Mikulas Patocka [Wed, 9 Apr 2014 01:52:05 +0000 (21:52 -0400)]
sym53c8xx_2: Set DID_REQUEUE return code when aborting squeue

This patch fixes I/O errors with the sym53c8xx_2 driver when the disk
returns QUEUE FULL status.

When the controller encounters an error (including QUEUE FULL or BUSY
status), it aborts all not yet submitted requests in the function
sym_dequeue_from_squeue.

This function aborts them with DID_SOFT_ERROR.

If the disk has full tag queue, the request that caused the overflow is
aborted with QUEUE FULL status (and the scsi midlayer properly retries
it until it is accepted by the disk), but the sym53c8xx_2 driver aborts
the following requests with DID_SOFT_ERROR --- for them, the midlayer
does just a few retries and then signals the error up to sd.

The result is that disk returning QUEUE FULL causes request failures.

The error was reproduced on 53c895 with COMPAQ BD03685A24 disk
(rebranded ST336607LC) with command queue 48 or 64 tags.  The disk has
64 tags, but under some access patterns it return QUEUE FULL when there
are less than 64 pending tags.  The SCSI specification allows returning
QUEUE FULL anytime and it is up to the host to retry.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agopowerpc: Don't try to set LPCR unless we're in hypervisor mode
Paul Mackerras [Fri, 11 Apr 2014 06:43:35 +0000 (16:43 +1000)]
powerpc: Don't try to set LPCR unless we're in hypervisor mode

Commit 8f619b5429d9 ("powerpc/ppc64: Do not turn AIL (reloc-on
interrupts) too early") added code to set the AIL bit in the LPCR
without checking whether the kernel is running in hypervisor mode.  The
result is that when the kernel is running as a guest (i.e., under
PowerKVM or PowerVM), the processor takes a privileged instruction
interrupt at that point, causing a panic.  The visible result is that
the kernel hangs after printing "returning from prom_init".

This fixes it by checking for hypervisor mode being available before
setting LPCR.  If we are not in hypervisor mode, we enable relocation-on
interrupts later in pSeries_setup_arch using the H_SET_MODE hcall.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>