sfrench/cifs-2.6.git
13 years agox86: prepare for pageattr.c unification
Ingo Molnar [Wed, 30 Jan 2008 12:34:03 +0000 (13:34 +0100)]
x86: prepare for pageattr.c unification

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: backmerge 64-bit details into 32-bit pageattr.c
Ingo Molnar [Wed, 30 Jan 2008 12:34:03 +0000 (13:34 +0100)]
x86: backmerge 64-bit details into 32-bit pageattr.c

backmerge 64-bit details into 32-bit pageattr.c.

the pageattr_32.c and pageattr_64.c files are now identical.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: enable DEBUG_PAGEALLOC on 64-bit
Ingo Molnar [Wed, 30 Jan 2008 12:34:03 +0000 (13:34 +0100)]
x86: enable DEBUG_PAGEALLOC on 64-bit

enable CONFIG_DEBUG_PAGEALLOC=y on 64-bit kernels too.

preliminary testing shows that it's working fine.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add kernel_map_pages() to 64-bit
Ingo Molnar [Wed, 30 Jan 2008 12:34:03 +0000 (13:34 +0100)]
x86: add kernel_map_pages() to 64-bit

needed for DEBUG_PAGEALLOC support and for unification.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: return -EINVAL in __change_page_attr(), instead of 0
Ingo Molnar [Wed, 30 Jan 2008 12:34:03 +0000 (13:34 +0100)]
x86: return -EINVAL in __change_page_attr(), instead of 0

careful: might change driver behavior - but this is the right
return value.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: clean up differences between 64-bit and 32-bit
Ingo Molnar [Wed, 30 Jan 2008 12:34:03 +0000 (13:34 +0100)]
x86: clean up differences between 64-bit and 32-bit

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: 64-bit, add the new split_large_page() function
Ingo Molnar [Wed, 30 Jan 2008 12:34:03 +0000 (13:34 +0100)]
x86: 64-bit, add the new split_large_page() function

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: 64-bit pageattr.c, prepare for unification
Ingo Molnar [Wed, 30 Jan 2008 12:34:03 +0000 (13:34 +0100)]
x86: 64-bit pageattr.c, prepare for unification

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: change 64-bit pageattr to use set_pte_atomic()
Ingo Molnar [Wed, 30 Jan 2008 12:34:02 +0000 (13:34 +0100)]
x86: change 64-bit pageattr to use set_pte_atomic()

NOP change - same as set_pte().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: change 64-bit __change_page_attr() to struct page
Ingo Molnar [Wed, 30 Jan 2008 12:34:02 +0000 (13:34 +0100)]
x86: change 64-bit __change_page_attr() to struct page

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: simplify __change_page_attr()
Ingo Molnar [Wed, 30 Jan 2008 12:34:01 +0000 (13:34 +0100)]
x86: simplify __change_page_attr()

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: introduce native_set_pte_atomic() on 64-bit too
Ingo Molnar [Wed, 30 Jan 2008 12:34:01 +0000 (13:34 +0100)]
x86: introduce native_set_pte_atomic() on 64-bit too

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: clean up and simplify 64-bit split_large_page()
Ingo Molnar [Wed, 30 Jan 2008 12:34:00 +0000 (13:34 +0100)]
x86: clean up and simplify 64-bit split_large_page()

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: unify header part of pageattr_64.c
Ingo Molnar [Wed, 30 Jan 2008 12:34:00 +0000 (13:34 +0100)]
x86: unify header part of pageattr_64.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: simplify pageattr_64.c
Ingo Molnar [Wed, 30 Jan 2008 12:33:59 +0000 (13:33 +0100)]
x86: simplify pageattr_64.c

simplify pageattr_64.c.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: prepare for the unification of the cpa code
Ingo Molnar [Wed, 30 Jan 2008 12:33:59 +0000 (13:33 +0100)]
x86: prepare for the unification of the cpa code

prepare for the unification of the cpa code, by unifying the
lookup_address() logic between 32-bit and 64-bit.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: prepare for the unification of the cpa code
Ingo Molnar [Wed, 30 Jan 2008 12:33:59 +0000 (13:33 +0100)]
x86: prepare for the unification of the cpa code

prepare for the unification of the cpa code, by unifying the
lookup_address() logic between 32-bit and 64-bit.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: cpa self-test, WARN_ON()
Ingo Molnar [Wed, 30 Jan 2008 12:33:58 +0000 (13:33 +0100)]
x86: cpa self-test, WARN_ON()

add a WARN_ON() to the cpa-self-test failure branch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: do not PSE on CONFIG_DEBUG_PAGEALLOC=y
Ingo Molnar [Wed, 30 Jan 2008 12:33:58 +0000 (13:33 +0100)]
x86: do not PSE on CONFIG_DEBUG_PAGEALLOC=y

get more testing of the c_p_a() code done by not turning off
PSE on DEBUG_PAGEALLOC.

this simplifies the early pagetable setup code, and tests
the largepage-splitup code quite heavily.

In the end, all the largepages will be split up pretty quickly,
so there's no difference to how DEBUG_PAGEALLOC worked before.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: cpa: simplify locking
Ingo Molnar [Wed, 30 Jan 2008 12:33:57 +0000 (13:33 +0100)]
x86: cpa: simplify locking

further simplify cpa locking: since the largepage-split is a
slowpath, use the pgd_lock for the whole operation, intead
of the mmap_sem.

This also makes it suitable for DEBUG_PAGEALLOC purposes again.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: simplify cpa largepage split, #3
Ingo Molnar [Wed, 30 Jan 2008 12:33:57 +0000 (13:33 +0100)]
x86: simplify cpa largepage split, #3

simplify cpa largepage split: push the reference protection bits
into the largepage-splitting function.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: cpa self-test fixes
Ingo Molnar [Wed, 30 Jan 2008 12:33:56 +0000 (13:33 +0100)]
x86: cpa self-test fixes

cpa self-test fixes. change_page_attr_addr() was buggy, it
passed in a virtual address as a physical one.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: further cpa largepage-split cleanups
Ingo Molnar [Wed, 30 Jan 2008 12:33:56 +0000 (13:33 +0100)]
x86: further cpa largepage-split cleanups

further cpa largepage-split cleanups: make the splitup isolated
functionality, without leaking details back into __change_page_attr().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: simplify 32-bit cpa largepage splitting
Ingo Molnar [Wed, 30 Jan 2008 12:33:55 +0000 (13:33 +0100)]
x86: simplify 32-bit cpa largepage splitting

simplify 32-bit cpa largepage splitting: do a pure split and repeat
the pte lookup to get the new pte modified.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: simplify the 32-bit cpa code
Ingo Molnar [Wed, 30 Jan 2008 12:33:55 +0000 (13:33 +0100)]
x86: simplify the 32-bit cpa code

simplify the 32-bit cpa code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix some bugs about EFI runtime code mapping
Huang, Ying [Wed, 30 Jan 2008 12:33:55 +0000 (13:33 +0100)]
x86: fix some bugs about EFI runtime code mapping

This patch fixes some bugs of making EFI runtime code executable.

- Use change_page_attr in i386 too. Because the runtime code may be
  mapped not through ioremap.

- If there is no _PAGE_NX in __supported_pte_mask, the change_page_attr
  is not called.

- Make efi_ioremap map pages as PAGE_KERNEL_EXEC_NOCACHE, because EFI runtime
  code may be mapped through efi_ioremap.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix more non-global TLB flushes
Ingo Molnar [Wed, 30 Jan 2008 12:33:54 +0000 (13:33 +0100)]
x86: fix more non-global TLB flushes

fix more __flush_tlb() instances, out of caution.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix early_ioremap() on 64-bit
Andi Kleen [Wed, 30 Jan 2008 12:33:54 +0000 (13:33 +0100)]
x86: fix early_ioremap() on 64-bit

Fix early_ioremap() on x86-64

I had ACPI failures on several machines since a few days. Symptom
was NUMA nodes not getting detected or worse cores not getting detected.
They all came from ACPI not being able to read various of its tables. I finally
bisected it down to Jeremy's "put _PAGE_GLOBAL into PAGE_KERNEL" change.
With that the fix was fairly obvious. The problem was that early_ioremap()
didn't use a "_all" flush that would affect the global PTEs too. So
with global bits getting used everywhere now an early_ioremap would
not actually flush a mapping if something else was mapped previously
on that slot (which can happen with early_iounmap inbetween)

This patch changes all flushes in init_64.c to be __flush_tlb_all()
and fixes the problem here.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: remove set_kernel_exec()
Andi Kleen [Wed, 30 Jan 2008 12:33:53 +0000 (13:33 +0100)]
x86: remove set_kernel_exec()

The SMP trampoline always runs in real mode, so making it executable
in the page tables doesn't make much sense because it executes
before page tables are set up. That was the only user of
set_kernel_exec(). Remove set_kernel_exec().

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: introduce canon_pgprot()
Andi Kleen [Wed, 30 Jan 2008 12:33:53 +0000 (13:33 +0100)]
x86: introduce canon_pgprot()

Introduce canon_pgprot()

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: c_p_a() make it more robust against use of PAT bits
Andi Kleen [Wed, 30 Jan 2008 12:33:52 +0000 (13:33 +0100)]
x86: c_p_a() make it more robust against use of PAT bits

Use the page table level instead of the PSE bit to check if the PTE
is for a 4K page or not. This makes the code more robust when the PAT
bit is changed because the PAT bit on 4K pages is in the same position
as the PSE bit.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: c_p_a() fix: reorder TLB / cache flushes to follow Intel recommendation
Andi Kleen [Wed, 30 Jan 2008 12:33:52 +0000 (13:33 +0100)]
x86: c_p_a() fix: reorder TLB / cache flushes to follow Intel recommendation

Intel recommends to first flush the TLBs and then the caches
on caching attribute changes. c_p_a() previously did it the
other way round. Reorder that.

The procedure is still not fully compliant to the Intel documentation
because Intel recommends a all CPU synchronization step between
the TLB flushes and the cache flushes.

However on all new Intel CPUs this is now meaningless anyways
because they support Self-Snoop and can skip the cache flush
step anyway.

[ mingo@elte.hu: decoupled from clflush and ported it to x86.git ]

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix c_p_a() boot crash
Andi Kleen [Wed, 30 Jan 2008 12:33:52 +0000 (13:33 +0100)]
x86: fix c_p_a() boot crash

fix:

> hm, i just found a failing 64-bit .config while testing your CPA
> patchset:
>
>  [    1.916541] CPA mapping 4k 0 large 2048 gb 0 x 0[0-0] miss 0
>  [    1.919874] Unable to handle kernel paging request at 000000000335aea8 RIP:
>  [    1.919874]  [<ffffffff8021d2d3>] change_page_attr+0x3/0x61
>  [    1.919874] PGD 0
>  [    1.919874] Oops: 0000 [1]
>  [    1.919874] CPU 0

This handles addresses which don't have a mem_map entry.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: don't drop NX bit in pte modifier functions on 32-bit
Andi Kleen [Wed, 30 Jan 2008 12:33:51 +0000 (13:33 +0100)]
x86: don't drop NX bit in pte modifier functions on 32-bit

The pte_* modifier functions that cleared bits dropped the NX bit on 32bit
PAE because they only worked in int, but NX is in bit 63. Fix that
by adding appropiate casts so that the arithmetic happens as long long
on PAE kernels.

I decided to just use 64bit arithmetic instead of open coding like
pte_modify() because gcc should generate good enough code for that now.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add pte_pgprot to 32-bit
Andi Kleen [Wed, 30 Jan 2008 12:33:51 +0000 (13:33 +0100)]
x86: add pte_pgprot to 32-bit

64bit already had it.

Needed for later patches.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: shrink __PAGE_KERNEL/__PAGE_KERNEL_EXEC on non PAE kernels
Andi Kleen [Wed, 30 Jan 2008 12:33:50 +0000 (13:33 +0100)]
x86: shrink __PAGE_KERNEL/__PAGE_KERNEL_EXEC on non PAE kernels

No need to make it 64bit there.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: cpa: remove unnecessary masking of address
Andi Kleen [Wed, 30 Jan 2008 12:33:50 +0000 (13:33 +0100)]
x86: cpa: remove unnecessary masking of address

virt_to_page does not care about the bits below the page granuality.
So don't mask them.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: cpa: use wbinvd() macro instead of inline assembly in 64bit c_p_a()
Andi Kleen [Wed, 30 Jan 2008 12:33:50 +0000 (13:33 +0100)]
x86: cpa: use wbinvd() macro instead of inline assembly in 64bit c_p_a()

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: early_ioremap_init(), enhance warnings
Ingo Molnar [Wed, 30 Jan 2008 12:33:49 +0000 (13:33 +0100)]
x86: early_ioremap_init(), enhance warnings

enhance the debug warning in early_ioremap_init().

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix EISA ioremap
Ingo Molnar [Wed, 30 Jan 2008 12:33:49 +0000 (13:33 +0100)]
x86: fix EISA ioremap

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix early_ioremap()/btmap
Ingo Molnar [Wed, 30 Jan 2008 12:33:48 +0000 (13:33 +0100)]
x86: fix early_ioremap()/btmap

fix a long-standing weakness of the early-ioremap allocator: it
uses a single pgd entry for the boot mappings, and was not properly
protecting itself against crossing a 2MB (4MB) boundary.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add early_ioremap() leak detection
Ingo Molnar [Wed, 30 Jan 2008 12:33:47 +0000 (13:33 +0100)]
x86: add early_ioremap() leak detection

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: make early_ioremap_debug early_param
Huang, Ying [Wed, 30 Jan 2008 12:33:45 +0000 (13:33 +0100)]
x86: make early_ioremap_debug early_param

This patch makes "early_ioremap_debug" a early parameter, because
"early_ioreamp/early_iounmap" is only used during early boot stage.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: early_ioremap(), debugging
Ingo Molnar [Wed, 30 Jan 2008 12:33:45 +0000 (13:33 +0100)]
x86: early_ioremap(), debugging

add early_ioremap() debug printouts via the early_ioremap_debug
boot option.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add debug warnings to early_ioremap()
Ingo Molnar [Wed, 30 Jan 2008 12:33:45 +0000 (13:33 +0100)]
x86: add debug warnings to early_ioremap()

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: increase the number of boot-mappings
Ingo Molnar [Wed, 30 Jan 2008 12:33:45 +0000 (13:33 +0100)]
x86: increase the number of boot-mappings

increase max early_ioremap() remapping size from 64K to 256K.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: enhance early_ioremap()
Ingo Molnar [Wed, 30 Jan 2008 12:33:45 +0000 (13:33 +0100)]
x86: enhance early_ioremap()

 - allow nesting of up to 4 levels

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: early_ioremap_reset fix
Huang, Ying [Wed, 30 Jan 2008 12:33:44 +0000 (13:33 +0100)]
x86: early_ioremap_reset fix

This patch fixes a bug of early_ioremap_reset.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86 32-bit boot: rename bt_ioremap() to early_ioremap()
Huang, Ying [Wed, 30 Jan 2008 12:33:44 +0000 (13:33 +0100)]
x86 32-bit boot: rename bt_ioremap() to early_ioremap()

This patch renames bt_ioremap to early_ioremap, which is used in
x86_64. This makes it easier to merge i386 and x86_64 usage.

[ mingo@elte.hu: fix ]

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: replace boot_ioremap() with enhanced bt_ioremap() - remove boot_ioremap()
Huang, Ying [Wed, 30 Jan 2008 12:33:44 +0000 (13:33 +0100)]
x86: replace boot_ioremap() with enhanced bt_ioremap() - remove boot_ioremap()

This patch replaces boot_ioremap invokation with bt_ioremap and
removes the boot_ioremap implementation.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agoi386 boot: replace boot_ioremap with enhanced bt_ioremap - enhance bt_ioremap
Huang, Ying [Wed, 30 Jan 2008 12:33:44 +0000 (13:33 +0100)]
i386 boot: replace boot_ioremap with enhanced bt_ioremap - enhance bt_ioremap

This patch makes it possible for bt_ioremap() to be used before
paging_init(), via providing an early implementation of set_fixmap()
that can be used before paging_init().

This way boot_ioremap() can be replaced by bt_ioremap().

Signed-off-by: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: set strong uncacheable where UC is really desired
Siddha, Suresh B [Wed, 30 Jan 2008 12:33:43 +0000 (13:33 +0100)]
x86: set strong uncacheable where UC is really desired

Also use _PAGE_PWT for all the mappings which need uncache mapping.
Instead of existing PAT2 which is UC- (and can be overwritten by MTRRs),
we now use PAT3 which is strong uncacheable.

This makes it consistent with pgprot_noncached()

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: use __PAGE_KERNEL_EXEC in ioremap_64.c
Joerg Roedel [Wed, 30 Jan 2008 12:33:43 +0000 (13:33 +0100)]
x86: use __PAGE_KERNEL_EXEC in ioremap_64.c

This patch replaces the manual permission setup for pages in ioremap_64.c with
the pre-defined __PAGE_KERNEL_EXEC value.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: cleanup boot_ioremap_32.c
Thomas Gleixner [Wed, 30 Jan 2008 12:33:43 +0000 (13:33 +0100)]
x86: cleanup boot_ioremap_32.c

Coding style cleanup before modifying the file.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: clean up arch/x86/mm/pageattr-test.c
Ingo Molnar [Wed, 30 Jan 2008 12:33:43 +0000 (13:33 +0100)]
x86: clean up arch/x86/mm/pageattr-test.c

fix 15 checkpatch warnings.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: c_p_a(), add simple self test at boot
Andi Kleen [Wed, 30 Jan 2008 12:33:43 +0000 (13:33 +0100)]
x86: c_p_a(), add simple self test at boot

Since change_page_attr() is tricky code it is good to have some regression
test code. This patch maps and unmaps some random pages in the direct mapping
at boot and then dumps the state and does some simple sanity checks.

Add it with a CONFIG option.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: return the page table level in lookup_address()
Ingo Molnar [Wed, 30 Jan 2008 12:33:43 +0000 (13:33 +0100)]
x86: return the page table level in lookup_address()

based on this patch from Andi Kleen:

|  Subject: CPA: Return the page table level in lookup_address()
|  From: Andi Kleen <ak@suse.de>
|
|  Needed for the next change.
|
|  And change all the callers.

and ported it to x86.git.

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add pte accessors for the global bit
Andi Kleen [Wed, 30 Jan 2008 12:33:42 +0000 (13:33 +0100)]
x86: add pte accessors for the global bit

Needed for some test code.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: clean up pte_exec
Andi Kleen [Wed, 30 Jan 2008 12:33:42 +0000 (13:33 +0100)]
x86: clean up pte_exec

- Rename it to pte_exec() from pte_exec_kernel(). There is nothing
kernel specific in there.
- Move it into the common file because _PAGE_NX is 0 on !PAE and then
pte_exec() will be always evaluate to true.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add dump_pagetable helper to X86_32
Harvey Harrison [Wed, 30 Jan 2008 12:33:42 +0000 (13:33 +0100)]
x86: add dump_pagetable helper to X86_32

Similar to x86 64-bit.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agoc_p_a(): do a simple self test at boot
Andi Kleen [Wed, 30 Jan 2008 12:33:42 +0000 (13:33 +0100)]
c_p_a(): do a simple self test at boot

When CONFIG_DEBUG_RODATA is enabled undo the ro mapping and redo it again.
This gives some simple testing for change_page_attr().

Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: clean up arch/x86/mm/pageattr_64.c
Ingo Molnar [Wed, 30 Jan 2008 12:33:41 +0000 (13:33 +0100)]
x86: clean up arch/x86/mm/pageattr_64.c

clean up arch/x86/mm/pageattr_64.c.

no code changed:

   text    data     bss     dec     hex filename
   1751      16       0    1767     6e7 pageattr_64.o.before
   1751      16       0    1767     6e7 pageattr_64.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: clean up arch/x86/mm/pageattr_32.c
Ingo Molnar [Wed, 30 Jan 2008 12:33:41 +0000 (13:33 +0100)]
x86: clean up arch/x86/mm/pageattr_32.c

clean up arch/x86/mm/pageattr_32.c.

no code changed:

   text    data     bss     dec     hex filename
   1255      40       0    1295     50f pageattr_32.o.before
   1255      40       0    1295     50f pageattr_32.o.after

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: change ioremap() to default to uncached
Ingo Molnar [Wed, 30 Jan 2008 12:33:40 +0000 (13:33 +0100)]
x86: change ioremap() to default to uncached

Prepare ioremap() to default to uncached. This will be the
safest - but first we have to fix CPA.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix recursion in arch/x86/kernel/cpu/mcheck/mce_amd_64.c
Yinghai Lu [Wed, 30 Jan 2008 12:33:40 +0000 (13:33 +0100)]
x86: fix recursion in arch/x86/kernel/cpu/mcheck/mce_amd_64.c

remove the recursion from this function.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: allocate and initialize unshared pmds
Jeremy Fitzhardinge [Wed, 30 Jan 2008 12:33:40 +0000 (13:33 +0100)]
x86: allocate and initialize unshared pmds

If SHARED_KERNEL_PMD is false, then we need to allocate and initialize
the kernel pmd.  We can easily piggy-back this onto the existing pmd
prepopulation code.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: preallocate pmds at pgd creation time
Jeremy Fitzhardinge [Wed, 30 Jan 2008 12:33:40 +0000 (13:33 +0100)]
x86: preallocate pmds at pgd creation time

In PAE mode, an update to the pgd requires a cr3 reload to make sure
the processor notices the changes.  Since this also has the
side-effect of flushing the tlb, its an expensive operation which we
want to avoid where possible.

This patch mitigates the cost of installing the initial set of pmds on
process creation by preallocating them when the pgd is allocated.
This avoids up to three tlb flushes during exec, as it creates the new
process address space while the pagetable is in active use.

The pmds will be freed as part of the normal pagetable teardown in
free_pgtables, which is called in munmap and process exit.  However,
free_pgtables will only free parts of the pagetable which actually
contain mappings, so stray pmds may still be attached to the pgd at
pgd_free time.  We must mop them up to prevent a memory leak.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: William Irwin <wli@holomorphy.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agoxen: deal with pmd being allocated/freed
Jeremy Fitzhardinge [Wed, 30 Jan 2008 12:33:39 +0000 (13:33 +0100)]
xen: deal with pmd being allocated/freed

Deal properly with pmd-level pages being allocated and freed
dynamically.  We can handle them more or less the same as pte pages.

Also, deal with early_ioremap pagetable manipulations.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: demacro asm-x86/pgalloc_32.h
Jeremy Fitzhardinge [Wed, 30 Jan 2008 12:33:39 +0000 (13:33 +0100)]
x86: demacro asm-x86/pgalloc_32.h

Convert macros into inline functions, for better type-checking.

This patch required a little bit of fiddling with headers in order to
make __(pte|pmd)_free_tlb inline rather than macros.
asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly
use any pgalloc definitions.  I removed this include to avoid an
include cycle, but it may cause secondary compile failures by things
depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one
such place; there may be others.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add mm parameter to paravirt_alloc_pd
Jeremy Fitzhardinge [Wed, 30 Jan 2008 12:33:39 +0000 (13:33 +0100)]
x86: add mm parameter to paravirt_alloc_pd

Add mm to paravirt_alloc_pd, partly to make it consistent with
paravirt_alloc_pt, and because later changes will make use of it.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agoxen: fix mismerge in masking pte flags
Jeremy Fitzhardinge [Wed, 30 Jan 2008 12:33:39 +0000 (13:33 +0100)]
xen: fix mismerge in masking pte flags

Looks like a mismerge/misapply dropped one of the cases of pte flag
masking for Xen.  Also, only mask the flags for present ptes.

Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: change aper valid checking sequence
Yinghai Lu [Wed, 30 Jan 2008 12:33:39 +0000 (13:33 +0100)]
x86: change aper valid checking sequence

old sequence:
  size ==> >4G  ==> point to RAM

changed to:
  >4G ==> point to RAM ==> size

some bios even leave aper to unclear, so check size at last.

To avoid reporting:

  Node 0: Aperture @ 4a42000000 size 32 MB
  Aperture too small (32 MB)

with this change we will get:

  Node 0: Aperture @ 4a42000000 size 32 MB
  Aperture beyond 4G. Ignoring.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: force enable HPET on (some?) ICH9 boards
Alistair John Strachan [Wed, 30 Jan 2008 12:33:39 +0000 (13:33 +0100)]
x86: force enable HPET on (some?) ICH9 boards

Some consumer ICH9 boards (such as the Abit IP35 Pro) do not provide a BIOS
option for enabling the HPET. The same ICH workaround used for 6,7,8 can be
applied to 9. Here I enable the only PCI id that was visible on my system.

I have confirmed the HPETs work both from userspace and as a clocksource for
the running kernel (2.6.24 here) after applying this patch.

 Force enabled HPET at base address 0xfed00000
 hpet clockevent registered
 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
 hpet0: 4 64-bit timers, 14318180 Hz

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: not set boot cpu in cpu_online_map in smp_prepare_boot_cpu()
Yinghai Lu [Wed, 30 Jan 2008 12:33:39 +0000 (13:33 +0100)]
x86: not set boot cpu in cpu_online_map in smp_prepare_boot_cpu()

in init/main.c boot_cpu_init() does that before.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: not set boot cpu in cpu_present_map again
Yinghai Lu [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: not set boot cpu in cpu_present_map again

in init/main.c boot_cpu_init() already does that before setup_arch

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: unify arch/x86/boot/compressed/misc_??.c
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify arch/x86/boot/compressed/misc_??.c

Remainder of unification can occur inplace.

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: unify variable names in arch/x86/boot/compressed/misc_??.c
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify variable names in arch/x86/boot/compressed/misc_??.c

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: unify headers in arch/x86/boot/compressed/misc_??.c
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify headers in arch/x86/boot/compressed/misc_??.c

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: unify whitespace and comments in arch/x86/boot/compressed/misc_??.c
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify whitespace and comments in arch/x86/boot/compressed/misc_??.c

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: unify strings in arch/x86/boot/compressed/misc_??.c
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify strings in arch/x86/boot/compressed/misc_??.c

There seems to be a preference for the 64 bit version so use that on 32 bit and
drop the stray leading "."

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: unify arch/x86/boot/compressed/vmlinux_??.scr
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: unify arch/x86/boot/compressed/vmlinux_??.scr

The files are now identical so merge them.

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: switch to .rodata.compressed in arch/x86/boot/compressed/vmlinux_??.scr
Ian Campbell [Wed, 30 Jan 2008 12:33:38 +0000 (13:33 +0100)]
x86: switch to .rodata.compressed in arch/x86/boot/compressed/vmlinux_??.scr

vmlinux_64 and vmlinux_32.scr are now identical

size shows an expected movement from .text to .rodata and 4 extra bytes
of padding.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: unify whitespace in arch/x86/boot/compressed/vmlinux_??.scr
Ian Campbell [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: unify whitespace in arch/x86/boot/compressed/vmlinux_??.scr

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: unify whitespace and comments in arch/x86/boot/compressed/vmlinux_??.lds
Ian Campbell [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: unify whitespace and comments in arch/x86/boot/compressed/vmlinux_??.lds

size reports no change in arch/x86/boot/compressed/vmlinux.

Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix usage of .section .sched.text in assembler code
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix usage of .section .sched.text in assembler code

Without this patch the linker will generate a section
named .sched.text.1 which is unexpected.
This is because the gcc generated section has "ax" but the
assembler usage of .sched.text lacks the "ax" specifier.

It would be better to have a definition we could use from
assembler code but I did not find a suitable header
file for it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix section mismatch warning in setup_64.c
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in setup_64.c

Fix the following warning:
WARNING: arch/x86/kernel/built-in.o(.cpuinit.text+0x7a3): Section mismatch: reference to .init.text:amd_detect_cmp in 'init_amd'

The function amd_detect_cmp were annotated __init and
was only used from init_amd() which are annotated __cpuinit.

Annotate amd_detect_cmp() with _cpuinit to fix it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix section mismatch warning in topology.c
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in topology.c

Fix following warning:
WARNING: arch/x86/kernel/built-in.o(__ksymtab+0x2b0): Section mismatch: reference to .cpuinit.text:arch_register_cpu in '__ksymtab_arch_register_cpu'

Annotating exported symbols are wrong.
Previously the warning were hidden by avoiding the export
in the non HOTPLUG_CPU case but the improved checks in
modpost caught it anyway.
Fix it by removing the __cpuinit annotation and rearrange the
code a bit to save one ifdef/endif pair.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix section mismatch warning in srat_64.c
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in srat_64.c

Fix the following warnings:
WARNING: arch/x86/mm/built-in.o(.text+0x1abc): Section mismatch: reference to .init.data:nodes_parsed in 'unparse_node'
WARNING: arch/x86/mm/built-in.o(.text+0x1ac6): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node'
WARNING: arch/x86/mm/built-in.o(.text+0x1ad2): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node'

unparse_node are static and only used by acpi_scan_nodes which
is already annotated __init.
So we annotate unparse_node with __init.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix section mismatch warning in early-quirks.c
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in early-quirks.c

Fix following warnings:
WARNING: arch/x86/kernel/built-in.o(.text+0x139e1): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x139f5): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a0c): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a12): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a1a): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a36): Section mismatch: reference to .init.data:early_qrk in 'check_dev_quirk'
WARNING: arch/x86/kernel/built-in.o(.text+0x13a42): Section mismatch: reference to .init.data:

Warning was caused by access to the __initdata annotated variable
from the non-annotated static function check_dev_quirk().
check_dev_quirk() were only used from a function annotated
__init so add __init annotation to check_dev_quirk() to fix it.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix section mismatch warning in acpi/boot.c
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in acpi/boot.c

Fix following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x10ea0): Section mismatch: reference to .cpuinit.data:num_processors in 'acpi_unmap_lsapic'

The exported function acpi_unmap_lsapic() references
the variable num_processors that is annotated __cpuinitdata.

Remove the annotation of num_processors as we never know
when an exported function are called.
And drop the needless initialsation to 0.

Warning was seen on 64 bit but similar pattern were seen
in 32 bit - so fix it up there too.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix section mismatch warning in process_*.c
Sam Ravnborg [Wed, 30 Jan 2008 12:33:37 +0000 (13:33 +0100)]
x86: fix section mismatch warning in process_*.c

Fix the following warning:
WARNING: arch/x86/kernel/built-in.o(.text+0x3): Section mismatch: reference to .cpuinit.data:force_mwait in 'mwait_usable'
[Seen on 64 bit only but similar pattern exist on 32 bit so fix it there too]

mwait_usable() were only used by a function annotated __cpuinit
so annotate mwait_usable() with __cpuinit to fix the warning.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix section mismatch warning in mcheck/mce_amd_64.c
Sam Ravnborg [Wed, 30 Jan 2008 12:33:36 +0000 (13:33 +0100)]
x86: fix section mismatch warning in mcheck/mce_amd_64.c

Fix following warning:
WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x1584): Section mismatch: reference to .cpuinit.text:threshold_create_device in 'threshold_cpu_callback'

threshold_cpu_callback() is only used by threshold_cpu_notifier.
threshold_cpu_notifier is only used for cpu hot plug as it is registered
using register_hotcpu_notifier().

Mark them both __cpuinit to fix the warning.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: fix section mismatch warning in mcheck/mce_64.c
Sam Ravnborg [Wed, 30 Jan 2008 12:33:36 +0000 (13:33 +0100)]
x86: fix section mismatch warning in mcheck/mce_64.c

Fix following warning:
WARNING: arch/x86/kernel/cpu/mcheck/built-in.o(.text+0x752): Section mismatch: reference to .cpuinit.text:mce_create_device in 'mce_cpu_callback'

mce_cpu_callback() is only used by mce_cpu_notofier.
The notifier is only used for hotplugable cpu's as it is
registered using register_hotcpu_notifier(),

Annotate them both __cpuinit to fix the warning.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add the RDC machine specific reboot fixup
Florian Fainelli [Wed, 30 Jan 2008 12:33:36 +0000 (13:33 +0100)]
x86: add the RDC machine specific reboot fixup

The RDC R-321x SoC needs a reboot fixup which
uses its internal hardware watchdog set to
reset the CPU on next tick.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add support for the RDC R-321x SoC
Florian Fainelli [Wed, 30 Jan 2008 12:33:36 +0000 (13:33 +0100)]
x86: add support for the RDC R-321x SoC

This patch adds support for the RDC R-321x system-on-chip,
also known as R-861x-(G). It uses the generic GPIO API and
has support for the on-chip hardware watchdog.

Build-fix from: Randy Dunlap <randy.dunlap@oracle.com>

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agopci: add PCI identifiers for the RDC devices
Florian Fainelli [Wed, 30 Jan 2008 12:33:36 +0000 (13:33 +0100)]
pci: add PCI identifiers for the RDC devices

This patch defines the PCI identifiers found in
the RDC R-321x System-on-Chip.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: add generic GPIO support to x86
Florian Fainelli [Wed, 30 Jan 2008 12:33:35 +0000 (13:33 +0100)]
x86: add generic GPIO support to x86

This patch adds the generic GPIO support to the x86
architecture. We do the same as for MIPS, we let
the machine override the gpio callbacks and provide
defaults one in mach-generic.

Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: GEODE: update GPIO API to support setting multiple GPIOs at once
Andres Salomon [Wed, 30 Jan 2008 12:33:35 +0000 (13:33 +0100)]
x86: GEODE: update GPIO API to support setting multiple GPIOs at once

The existing Geode GPIO API only allows for updating one GPIO at once.  There
are instances where users want to update multiple GPIOs at once.  With the
current API, they are given two choices; either ignore the GPIO API:

      outl(0xc000, gpio_base + GPIO_OUTPUT_VAL);
      outl(0xc000, gpio_base + GPIO_OUTPUT_ENABLE);

Alternatively, call each GPIO update separately:

      geode_gpio_set(14, GPIO_OUTPUT_VAL);
      geode_gpio_set(15, GPIO_OUTPUT_VAL);
      geode_gpio_set(14, GPIO_OUTPUT_ENABLE);
      geode_gpio_set(15, GPIO_OUTPUT_ENABLE);

Neither are desirable.  This patch changes the GPIO API to allow for setting
of multiple GPIOs at once; rather than being passed an integer, we pass
a bitmask and provide a translation function.  The above code would now
look like this:

      geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_VAL);
      geode_gpio_set(geode_gpio(14)|geode_gpio(15), GPIO_OUTPUT_ENABLE);

Since there are no upstream users of the GPIO API yet (afaik), best to
change this now.  This also adds a bit of sanity checking; it is no
longer possible to use a GPIO above 28.

Note the semantics of geode_gpio_isset() have changed:
geode_gpio_isset(geode_gpio(3)|geode_gpio(4), ...)
will only return true iff both GPIOs are set.

Signed-off-by: Andres Salomon <dilinger@debian.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
13 years agox86: fix cpu MHz reporting for AMD family 0x11
Andreas Herrmann3 [Wed, 30 Jan 2008 12:33:35 +0000 (13:33 +0100)]
x86: fix cpu MHz reporting for AMD family 0x11

Fix cpu MHz reporting for AMD family 0x11 when powernow-k8 is
disabled.

Just adhere to the CONSTANT_TSC feature bit for AMD CPUs when deciding
whether cpu_khz needs calibration. The additional check for CPU family
is not needed and prevents calibration for future CPUs.

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
13 years agox86: improve MTRR trimming messages
Ingo Molnar [Wed, 30 Jan 2008 12:33:35 +0000 (13:33 +0100)]
x86: improve MTRR trimming messages

improve the MTTR trimming messages and also trigger a WARN_ON()
so that kerneloops.org can pick it up and categorize it.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>