git.samba.org - sfrench/cifs-2.6.git/log

Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming

Pull c6x fixlet from Mark Salter:
"Update maintainer email"

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
MAINTAINERS: update email address for C6x maintainer

Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 bugfix from Martin Schwidefsky:
"One last s390 patch for 4.12

  Revert the re-IPL semantics back to the v4.7 state. It turned out that
  the memory layout may change due to memory hotplug if load-normal is
  used"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ipl: revert Load Normal semantics for LPAR CCW-type re-IPL

perf machine: Fix segfault for kernel.kptr_restrict=2

Michael reported the segfault when kernel.kptr_restrict=2 is set.

  $ perf record ls
  ...
  perf: Segmentation fault
  Obtained 16 stack frames.
  ./perf(dump_stack+0x2d) [0x5068df]
  ./perf(sighandler_dump_stack+0x2d) [0x5069bf]
  ./perf() [0x43e47b]
  /lib64/libc.so.6(+0x3594f) [0x7f762004794f]
  /lib64/libc.so.6(strlen+0x26) [0x7f762009ef86]
  /lib64/libc.so.6(__strdup+0xd) [0x7f762009ecbd]
  ./perf(maps__set_kallsyms_ref_reloc_sym+0x4d) [0x51590f]
  ./perf(machine__create_kernel_maps+0x136) [0x50a7de]
  ./perf(perf_session__create_kernel_maps+0x2c) [0x510a81]
  ./perf(perf_session__new+0x13d) [0x510e23]
  ./perf() [0x43fd61]
  ./perf(cmd_record+0x704) [0x441823]
  ./perf() [0x4bc1a0]
  ./perf() [0x4bc40d]
  ./perf() [0x4bc55f]
  ./perf(main+0x2d5) [0x4bc939]
  Segmentation fault (core dumped)

The reason is that with kernel.kptr_restrict=2, we don't get
the symbol from machine__get_running_kernel_start, which we
want to use in maps__set_kallsyms_ref_reloc_sym and we crash.

Check the symbol name value before calling
maps__set_kallsyms_ref_reloc_sym() and succeed without ref_reloc_sym
being set. It's safe because we check its existence before we use it.

Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170626095153.553-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

powerpc/32: Avoid miscompilation w/GCC 4.6.3 - don't inline copy_to/from_user()

Larry Finger reported that his Powerbook G4 was no longer booting with v4.12-rc,
userspace was up but giving weird errors such as:

  udevd[64]: starting version 175
  udevd[64]: Unable to receive ctrl message: Bad address.
  modprobe: chdir(4.12-rc1): No such file or directory

He bisected the problem to commit 3448890c32c3 ("powerpc: get rid of zeroing,
switch to RAW_COPY_USER").

Al identified that the problem is actually a miscompilation by GCC 4.6.3, which
is exposed by the above commit.

Al also pointed out that inlining copy_to/from_user() is probably of little or
no benefit, which is correct. Using Anton's copy_to_user benchmark, with a
pathological single byte copy, we see a small increase in performance
by *removing* inlining:

  Before (inlined):
  # time ./copy_to_user -w -l 1 -i 10000000 ( x 3 )
  real 0m22.063s
  real 0m22.059s
  real 0m22.076s

  After:
  # time ./copy_to_user -w -l 1 -i 10000000 ( x 3 )
  real 0m21.325s
  real 0m21.299s
  real 0m21.364s

So as a small performance improvement and to avoid the miscompilation, drop
inlining copy_to/from_user() on 32-bit.

Fixes: 3448890c32c3 ("powerpc: get rid of zeroing, switch to RAW_COPY_USER")
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

drm/vmwgfx: Free hash table allocated by cmdbuf managed res mgr

The hash table created during vmw_cmdbuf_res_man_create was
never freed. This causes memory leak in context creation.
Added the corresponding drm_ht_remove in vmw_cmdbuf_res_man_destroy.

Tested for memory leak by running piglit overnight and kernel
memory is not inflated which earlier was.

Cc: <stable@vger.kernel.org>
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>

x86/mm/hotplug: Fix BUG_ON() after hot-remove by not freeing PUD

Since commit:

af2cf278ef4f ("x86/mm/hotplug: Don't remove PGD entries in remove_pagetable()")

we no longer free PUDs so that we do not have to synchronize
all PGDs on hot-remove/vfree().

But the new 5-level page table patchset reverted that for 4-level
page tables, in the following commit:

f2a6a7050109: ("x86: Convert the rest of the code to support p4d_t")

This patch restores the damage and disables free_pud() if we are in the
4-level page table case, thus avoiding BUG_ON() after hot-remove.

Signed-off-by: Jérôme Glisse <jglisse@redhat.com>
[ Clarified the changelog and the code comments. ]
Reviewed-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/20170624180514.3821-1-jglisse@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

drm/i915: Disable EXEC_OBJECT_ASYNC when doing relocations

If we write a relocation into the buffer, we require our own implicit
synchronisation added after the start of the execbuf, outside of the
user's control. As we may end up clflushing, or doing the patch itself
on the GPU, asynchronously we need to look at the implicit serialisation
on obj->resv and hence need to disable EXEC_OBJECT_ASYNC for this
object.

If the user does trigger a stall for relocations, we make sure the stall
is complete enough so that the batch is not submitted before we complete
those relocations.

Fixes: 77ae9957897d ("drm/i915: Enable userspace to opt-out of implicit fencing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 071750e550af46b5d3a84ad56c2a108c3e136284)
[danvet: Resolve conflicts, resolution reviewed by Tvrtko on irc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Hold struct_mutex for per-file stats in debugfs/i915_gem_object

As we walk the obj->vma_list in per_file_stats(), we need to hold
struct_mutex to prevent alteration of that list.

Fixes: 1d2ac403ae3b ("drm: Protect dev->filelist with its own mutex")
Fixes: c84455b4bacc ("drm/i915: Move debug only per-request pid tracking from request to ctx")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101460
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170617115744.4452-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
(cherry picked from commit 0caf81b5c53d9bd332a95dbcb44db8de0b397a7c)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Retire the VMA's fence tracker before unbinding

Since we may track unfenced access (GPU access to the vma that
explicitly requires no fence), vma->last_fence may be set without any
attached fence (vma->fence) and so will not be flushed when we call
i915_vma_put_fence(). Since we stopped doing a full retire of the
activity trackers for unbind, we need to explicitly retire each tracker.

Fixes: b0decaf75bd9 ("drm/i915: Track active vma requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620124321.1108-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
(cherry picked from commit 760a898d8069111704e1bd43f00ebf369ae46e57)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Linux 4.12-rc7

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fix from Thomas Gleixner:
"A single fix to unbreak the vdso32 build for 64bit kernels caused by
excess #includes in the mshyperv header"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mshyperv: Remove excess #includes from mshyperv.h

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fixes from Thomas Gleixner:
"A few fixes for timekeeping and timers:

   - Plug a subtle race due to a missing READ_ONCE() in the timekeeping
     code where reloading of a pointer results in an inconsistent
     callback argument being supplied to the clocksource->read function.

   - Correct the CLOCK_MONOTONIC_RAW sub-nanosecond accounting in the
     time keeping core code, to prevent a possible discontuity.

   - Apply a similar fix to the arm64 vdso clock_gettime()
     implementation

   - Add missing includes to clocksource drivers, which relied on
     indirect includes which fails in certain configs.

   - Use the proper iomem pointer for read/iounmap in a probe function"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  arm64/vdso: Fix nsec handling for CLOCK_MONOTONIC_RAW
  time: Fix CLOCK_MONOTONIC_RAW sub-nanosecond accounting
  time: Fix clock->read(clock) race around clocksource changes
  clocksource: Explicitly include linux/clocksource.h when needed
  clocksource/drivers/arm_arch_timer: Fix read and iounmap of incorrect variable

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Thomas Gleixner:
"Three fixlets for perf:

   - Return the proper error code if aux buffers for a event are not
     supported.

   - Calculate the probe offset for inlined functions correctly

   - Update the Skylake DTLB load/store miss event so it can count 1G
     TLB entries as well"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf probe: Fix probe definition for inlined functions
  perf/x86/intel: Add 1G DTLB load/store miss support for SKL
  perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)

Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq fix from Thomas Gleixner:
"A single fix for the MIPS GIC to prevent ftrace recursion"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Mark count and compare accessors notrace

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:

- a quirk to i8042 to ignore timeout bit on Lifebook AH544

- a fixup to Synaptics RMI function 54 that was breaking some Dells

- a fix for memory leak in soc_button_array driver

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics-rmi4 - only read the F54 query registers which are used
  Input: i8042 - add Fujitsu Lifebook AH544 to notimeout list
  Input: soc_button_array - fix leaking the ACPI button descriptor buffer

Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:
"Here are the target-pending fixes for v4.12-rc7 that have been queued
  up for the last 2 weeks. This includes:

   - Fix a TMR related kref underflow detected by the recent refcount_t
     conversion in upstream.

   - Fix a iscsi-target corner case during explicit connection logout
     timeout failure.

   - Address last fallout in iscsi-target immediate data handling from
     v4.4 target-core now allowing control CDB payload underflow"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: Reject immediate data underflow larger than SCSI transfer length
  iscsi-target: Fix delayed logout processing greater than SECONDS_FOR_LOGOUT_COMP
  target: Fix kref->refcount underflow in transport_cmd_finish_abort

tcp: reset sk_rx_dst in tcp_disconnect()

We have to reset the sk->sk_rx_dst when we disconnect a TCP
connection, because otherwise when we re-connect it this
dst reference is simply overridden in tcp_finish_connect().

This fixes a dst leak which leads to a loopback dev refcnt
leak. It is a long-standing bug, Kevin reported a very similar
(if not same) bug before. Thanks to Andrei for providing such
a reliable reproducer which greatly narrows down the problem.

Fixes: 41063e9dd119 ("ipv4: Early TCP socket demux.")
Reported-by: Andrei Vagin <avagin@gmail.com>
Reported-by: Kevin Xu <kaiwen.xu@hulu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv6: reset daddr and dport in sk if connect() fails

In __ip6_datagram_connect(), reset sk->sk_v6_daddr and inet->dport if
error occurs.
In udp_v6_early_demux(), check for sk_state to make sure it is in
TCP_ESTABLISHED state.
Together, it makes sure unconnected UDP socket won't be considered as a
valid candidate for early demux.

v3: add TCP_ESTABLISHED state check in udp_v6_early_demux()
v2: fix compilation error

Fixes: 5425077d73e0 ("net: ipv6: Add early demux handler for UDP unicast")
Signed-off-by: Wei Wang <weiwan@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnx2x: Don't log mc removal needlessly

When mc configuration changes bnx2x_config_mcast() can return 0 for
success, negative for failure and positive for benign reason preventing
its immediate work, e.g., when the command awaits the completion of
a previously sent command.

When removing all configured macs on a 578xx adapter, if a positive
value would be returned driver would errneously log it as an error.

Fixes: c7b7b483ccc9 ("bnx2x: Don't flush multicast MACs")
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'kbuild-fixes-v4.12-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:
"Nothing scary, just some random fixes:

   - fix warnings of host programs

   - fix "make tags" when COMPILED_SOURCE=1 is specified along with O=

   - clarify help message of C=1 option

   - fix dependency for ncurses compatibility check

   - fix "make headers_install" for fakechroot environment"

* tag 'kbuild-fixes-v4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix sparse warnings in nconfig
  kbuild: fix header installation under fakechroot environment
  kconfig: Check for libncurses before menuconfig
  Kbuild: tiny correction on `make help`
  tags: honor COMPILED_SOURCE with apart output directory
  genksyms: add printf format attribute to error_with_pos()

Merge branch 'for-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull timer fix from Eric Biederman:
"This fixes an issue of confusing injected signals with the signals
  from posix timers that has existed since posix timers have been in the
  kernel.

  This patch is slightly simpler than my earlier version of this patch
  as I discovered in testing that I had misspelled "#ifdef
  CONFIG_POSIX_TIMERS". So I deleted that unnecessary test and made
  setting of resched_timer uncondtional.

  I have tested this and verified that without this patch there is a
  nasty hang that is easy to trigger, and with this patch everything
  works properly"

Thomas Gleixner dixit:
"It fixes the problem at hand and covers the ptrace case as well, which
  I missed.

Reviewed-and-tested-by: Thomas Gleixner <tglx@linutronix.de>"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Only reschedule timers on signals timers have sent

x86/mshyperv: Remove excess #includes from mshyperv.h

A recent commit included linux/slab.h in linux/irq.h. This breaks the build
of vdso32 on a 64-bit kernel.

The reason is that linux/irq.h gets included into the vdso code via
linux/interrupt.h which is included from asm/mshyperv.h. That makes the
32-bit vdso compile fail, because slab.h includes the pgtable headers for
64-bit on a 64-bit build.

Neither linux/clocksource.h nor linux/interrupt.h are needed in the
mshyperv.h header file itself - it has a dependency on <linux/atomic.h>.

Remove the includes and unbreak the build.

Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: devel@linuxdriverproject.org
Fixes: dee863b571b0 ("hv: export current Hyper-V clocksource")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1706231038460.2647@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'powerpc-4.12-7' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 4.12. Most of these actually came in last
  week but got held up for some more testing.

   - three fixes for kprobes/ftrace/livepatch interactions.

   - properly handle data breakpoints when using the Radix MMU.

   - fix for perf sampling of registers during call_usermodehelper().

   - properly initialise the thread_info on our emergency stacks

   - add an explicit flush when doing TLB invalidations for a process
     using NPU2.

  Thanks to: Alistair Popple, Naveen N. Rao, Nicholas Piggin, Ravi
  Bangoria, Masami Hiramatsu"

* tag 'powerpc-4.12-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64: Initialise thread_info for emergency stacks
  powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD
  powerpc/perf: Fix oops when kthread execs user process
  powerpc/64s: Handle data breakpoints in Radix mode
  powerpc/kprobes: Skip livepatch_handler() for jprobes
  powerpc/ftrace: Pass the correct stack pointer for DYNAMIC_FTRACE_WITH_REGS
  powerpc/kprobes: Pause function_graph tracing during jprobes handling

Merge tag 'acpi-4.12-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
"This fixes the ACPI-based enumeration of some I2C and SPI devices
  broken in 4.11.

  Specifics:

   - I2C and SPI devices are expected to be enumerated by the I2C and
     SPI subsystems, respectively, but due to a change made during the
     4.11 cycle, in some cases the ACPI core marks them as already
     enumerated which causes the I2C and SPI subsystems to overlook
     them, so fix that (Jarkko Nikula)"

* tag 'acpi-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / scan: Fix enumeration for special SPI and I2C devices

Merge branch 'i2c/for-current-fixed' of git://git./linux/kernel/git/wsa/linux

Pull i2c fix from Wolfram Sang.

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: Use correct function to write to register

Merge tag 'gpio-v4.12-3' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fix from Linus Walleij:
"A single GPIO patch fixing the compatible string for the MVEBU PWM
  controller embedded in the GPIO controller before we release v4.12.
  Hopefully"

* tag 'gpio-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mvebu: change compatible string for PWM support

Merge tag 'sound-4.12-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"Nothing exciting here, just a few stable fixes:

   - suppress spurious kernel WARNING in PCM core

   - fix potential spin deadlock at error handling in firewire

   - HD-audio PCI ID addition / fixup"

* tag 'sound-4.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Apply quirks to Broxton-T, too
  ALSA: firewire-lib: Fix stall of process context at packet error
  ALSA: pcm: Don't treat NULL chmap as a fatal error
  ALSA: hda - Add Coffelake PCI ID

Merge tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"A varied bunch of fixes, one for an API regression with connectors.

  Otherwise amdgpu and i915 have a bunch of varied fixes, the shrinker
  ones being the most important"

* tag 'drm-fixes-for-v4.12-rc7' of git://people.freedesktop.org/~airlied/linux:
  drm: Fix GETCONNECTOR regression
  drm/radeon: add a quirk for Toshiba Satellite L20-183
  drm/radeon: add a PX quirk for another K53TK variant
  drm/amdgpu: adjust default display clock
  drm/amdgpu/atom: fix ps allocation size for EnableDispPowerGating
  drm/amdgpu: add Polaris12 DID
  drm/i915: Don't enable backlight at setup time.
  drm/i915: Plumb the correct acquire ctx into intel_crtc_disable_noatomic()
  drm/i915: Fix deadlock witha the pipe A quirk during resume
  drm/i915: Remove __GFP_NORETRY from our buffer allocator
  drm/i915: Encourage our shrinker more when our shmemfs allocations fails
  drm/i915: Differentiate between sw write location into ring and last hw read

Merge tag 'random_for_linus_stable' of git://git./linux/kernel/git/tytso/random

Pull random fixes from Ted Ts'o:
"Fix some locking and gcc optimization issues from the most recent
random_for_linus_stable pull request"

* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: silence compiler warnings and fix race

Merge tag 'for-4.12/dm-fixes-4' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

- a revert of a DM mirror commit that has proven to make the code prone
   to crash

- a DM io reference count fix that resolves a NULL pointer seen when
   issuing discards to a DM mirror target's device whose mirror legs do
   not all support discards

- a couple DM integrity fixes

* tag 'for-4.12/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm io: fix duplicate bio completion due to missing ref count
  dm integrity: fix to not disable/enable interrupts from interrupt context
  Revert "dm mirror: use all available legs on multiple failures"
  dm integrity: reject mappings too large for device

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"8 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  fs/exec.c: account for argv/envp pointers
  ocfs2: fix deadlock caused by recursive locking in xattr
  slub: make sysfs file removal asynchronous
  lib/cmdline.c: fix get_options() overflow while parsing ranges
  fs/dax.c: fix inefficiency in dax_writeback_mapping_range()
  autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL
  mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings
  mm, thp: remove cond_resched from __collapse_huge_page_copy

fs/exec.c: account for argv/envp pointers

When limiting the argv/envp strings during exec to 1/4 of the stack limit,
the storage of the pointers to the strings was not included. This means
that an exec with huge numbers of tiny strings could eat 1/4 of the stack
limit in strings and then additional space would be later used by the
pointers to the strings.

For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721
single-byte strings would consume less than 2MB of stack, the max (8MB /
4) amount allowed, but the pointers to the strings would consume the
remaining additional stack space (1677721 * 4 == 6710884).

The result (1677721 + 6710884 == 8388605) would exhaust stack space
entirely. Controlling this stack exhaustion could result in
pathological behavior in setuid binaries (CVE-2017-1000365).

[akpm@linux-foundation.org: additional commenting from Kees]
Fixes: b6a2fea39318 ("mm: variable length argument support")
Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Qualys Security Advisory <qsa@qualys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix deadlock caused by recursive locking in xattr

Another deadlock path caused by recursive locking is reported.  This
kind of issue was introduced since commit 743b5f1434f5 ("ocfs2: take
inode lock in ocfs2_iop_set/get_acl()").  Two deadlock paths have been
fixed by commit b891fa5024a9 ("ocfs2: fix deadlock issue when taking
inode lock at vfs entry points").  Yes, we intend to fix this kind of
case in incremental way, because it's hard to find out all possible
paths at once.

This one can be reproduced like this.  On node1, cp a large file from
home directory to ocfs2 mountpoint.  While on node2, run
setfacl/getfacl.  Both nodes will hang up there.  The backtraces:

On node1:
  __ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2]
  ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2]
  ocfs2_write_begin+0x43/0x1a0 [ocfs2]
  generic_perform_write+0xa9/0x180
  __generic_file_write_iter+0x1aa/0x1d0
  ocfs2_file_write_iter+0x4f4/0xb40 [ocfs2]
  __vfs_write+0xc3/0x130
  vfs_write+0xb1/0x1a0
  SyS_write+0x46/0xa0

On node2:
  __ocfs2_cluster_lock.isra.39+0x357/0x740 [ocfs2]
  ocfs2_inode_lock_full_nested+0x17d/0x840 [ocfs2]
  ocfs2_xattr_set+0x12e/0xe80 [ocfs2]
  ocfs2_set_acl+0x22d/0x260 [ocfs2]
  ocfs2_iop_set_acl+0x65/0xb0 [ocfs2]
  set_posix_acl+0x75/0xb0
  posix_acl_xattr_set+0x49/0xa0
  __vfs_setxattr+0x69/0x80
  __vfs_setxattr_noperm+0x72/0x1a0
  vfs_setxattr+0xa7/0xb0
  setxattr+0x12d/0x190
  path_setxattr+0x9f/0xb0
  SyS_setxattr+0x14/0x20

Fix this one by using ocfs2_inode_{lock|unlock}_tracker, which is
exported by commit 439a36b8ef38 ("ocfs2/dlmglue: prepare tracking logic
to avoid recursive cluster lock").

Link: http://lkml.kernel.org/r/20170622014746.5815-1-zren@suse.com
Fixes: 743b5f1434f5 ("ocfs2: take inode lock in ocfs2_iop_set/get_acl()")
Signed-off-by: Eric Ren <zren@suse.com>
Reported-by: Thomas Voegtle <tv@lio96.de>
Tested-by: Thomas Voegtle <tv@lio96.de>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Cc: Mark Fasheh <mfasheh@versity.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: make sysfs file removal asynchronous

Commit bf5eb3de3847 ("slub: separate out sysfs_slab_release() from
sysfs_slab_remove()") made slub sysfs file removals synchronous to
kmem_cache shutdown.

Unfortunately, this created a possible ABBA deadlock between slab_mutex
and sysfs draining mechanism triggering the following lockdep warning.

  ======================================================
  [ INFO: possible circular locking dependency detected ]
  4.10.0-test+ #48 Not tainted
  -------------------------------------------------------
  rmmod/1211 is trying to acquire lock:
   (s_active#120){++++.+}, at: [<ffffffff81308073>] kernfs_remove+0x23/0x40

  but task is already holding lock:
   (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #1 (slab_mutex){+.+.+.}:
lock_acquire+0xf6/0x1f0
__mutex_lock+0x75/0x950
mutex_lock_nested+0x1b/0x20
slab_attr_store+0x75/0xd0
sysfs_kf_write+0x45/0x60
kernfs_fop_write+0x13c/0x1c0
__vfs_write+0x28/0x120
vfs_write+0xc8/0x1e0
SyS_write+0x49/0xa0
entry_SYSCALL_64_fastpath+0x1f/0xc2

  -> #0 (s_active#120){++++.+}:
__lock_acquire+0x10ed/0x1260
lock_acquire+0xf6/0x1f0
__kernfs_remove+0x254/0x320
kernfs_remove+0x23/0x40
sysfs_remove_dir+0x51/0x80
kobject_del+0x18/0x50
__kmem_cache_shutdown+0x3e6/0x460
kmem_cache_destroy+0x1fb/0x2d0
kvm_exit+0x2d/0x80 [kvm]
vmx_exit+0x19/0xa1b [kvm_intel]
SyS_delete_module+0x198/0x1f0
entry_SYSCALL_64_fastpath+0x1f/0xc2

  other info that might help us debug this:

   Possible unsafe locking scenario:

CPU0                    CPU1
----                    ----
    lock(slab_mutex);
lock(s_active#120);
lock(slab_mutex);
    lock(s_active#120);

   *** DEADLOCK ***

  2 locks held by rmmod/1211:
   #0:  (cpu_hotplug.dep_map){++++++}, at: [<ffffffff810a7877>] get_online_cpus+0x37/0x80
   #1:  (slab_mutex){+.+.+.}, at: [<ffffffff8120f691>] kmem_cache_destroy+0x41/0x2d0

  stack backtrace:
  CPU: 3 PID: 1211 Comm: rmmod Not tainted 4.10.0-test+ #48
  Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
  Call Trace:
   print_circular_bug+0x1be/0x210
   __lock_acquire+0x10ed/0x1260
   lock_acquire+0xf6/0x1f0
   __kernfs_remove+0x254/0x320
   kernfs_remove+0x23/0x40
   sysfs_remove_dir+0x51/0x80
   kobject_del+0x18/0x50
   __kmem_cache_shutdown+0x3e6/0x460
   kmem_cache_destroy+0x1fb/0x2d0
   kvm_exit+0x2d/0x80 [kvm]
   vmx_exit+0x19/0xa1b [kvm_intel]
   SyS_delete_module+0x198/0x1f0
   ? SyS_delete_module+0x5/0x1f0
   entry_SYSCALL_64_fastpath+0x1f/0xc2

It'd be the cleanest to deal with the issue by removing sysfs files
without holding slab_mutex before the rest of shutdown; however, given
the current code structure, it is pretty difficult to do so.

This patch punts sysfs file removal to a work item.  Before commit
bf5eb3de3847, the removal was punted to a RCU delayed work item which is
executed after release.  Now, we're punting to a different work item on
shutdown which still maintains the goal removing the sysfs files earlier
when destroying kmem_caches.

Link: http://lkml.kernel.org/r/20170620204512.GI21326@htj.duckdns.org
Fixes: bf5eb3de3847 ("slub: separate out sysfs_slab_release() from sysfs_slab_remove()")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/cmdline.c: fix get_options() overflow while parsing ranges

When using get_options() it's possible to specify a range of numbers,
like 1-100500. The problem is that it doesn't track array size while
calling internally to get_range() which iterates over the range and
fills the memory with numbers.

Link: http://lkml.kernel.org/r/2613C75C-B04D-4BFF-82A6-12F97BA0F620@gmail.com
Signed-off-by: Ilya V. Matveychikov <matvejchikov@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/dax.c: fix inefficiency in dax_writeback_mapping_range()

dax_writeback_mapping_range() fails to update iteration index when
searching radix tree for entries needing cache flushing. Thus each
pagevec worth of entries is searched starting from the start which is
inefficient and prone to livelocks. Update index properly.

Link: http://lkml.kernel.org/r/20170619124531.21491-1-jack@suse.cz
Fixes: 9973c98ecfda3 ("dax: add support for fsync/sync")
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs: sanity check status reported with AUTOFS_DEV_IOCTL_FAIL

If a positive status is passed with the AUTOFS_DEV_IOCTL_FAIL ioctl,
autofs4_d_automount() will return

ERR_PTR(status)

with that status to follow_automount(), which will then dereference an
invalid pointer.

So treat a positive status the same as zero, and map to ENOENT.

See comment in systemd src/core/automount.c::automount_send_ready().

Link: http://lkml.kernel.org/r/871sqwczx5.fsf@notabene.neil.brown.name
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: huge-vmap: fail gracefully on unexpected huge vmap mappings

Existing code that uses vmalloc_to_page() may assume that any address
for which is_vmalloc_addr() returns true may be passed into
vmalloc_to_page() to retrieve the associated struct page.

This is not un unreasonable assumption to make, but on architectures
that have CONFIG_HAVE_ARCH_HUGE_VMAP=y, it no longer holds, and we need
to ensure that vmalloc_to_page() does not go off into the weeds trying
to dereference huge PUDs or PMDs as table entries.

Given that vmalloc() and vmap() themselves never create huge mappings or
deal with compound pages at all, there is no correct answer in this
case, so return NULL instead, and issue a warning.

When reading /proc/kcore on arm64, you will hit an oops as soon as you
hit the huge mappings used for the various segments that make up the
mapping of vmlinux. With this patch applied, you will no longer hit the
oops, but the kcore contents willl be incorrect (these regions will be
zeroed out)

We are fixing this for kcore specifically, so it avoids vread() for
those regions. At least one other problematic user exists, i.e.,
/dev/kmem, but that is currently broken on arm64 for other reasons.

Link: http://lkml.kernel.org/r/20170609082226.26152-1-ard.biesheuvel@linaro.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, thp: remove cond_resched from __collapse_huge_page_copy

This is a partial revert of commit 338a16ba1549 ("mm, thp: copying user
pages must schedule on collapse") which added a cond_resched() to
__collapse_huge_page_copy().

On x86 with CONFIG_HIGHPTE, __collapse_huge_page_copy is called in
atomic context and thus scheduling is not possible. This is only a
possible config on arm and i386.

Although need_resched has been shown to be set for over 100 jiffies
while doing the iteration in __collapse_huge_page_copy, this is better
than doing

if (in_atomic())
cond_resched()

to cover only non-CONFIG_HIGHPTE configs.

Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1706191341550.97821@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Two fixes to remove spurious WARN_ONs from the new(ish) qedi driver.

  The driver already prints a warning message, there's no need to panic
  users by printing something that looks like an oops as well"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qedi: Remove WARN_ON from clear task context.
  scsi: qedi: Remove WARN_ON for untracked cleanup.

Merge tag 'xfs-4.12-fixes-5' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"I have one more bugfix for you for 4.12-rc7 to fix a disk corruption
  problem:

   - don't allow swapon on files on the realtime device, because the
     swap code will swap pages out to blocks on the data device, thereby
     corrupting the filesystem"

* tag 'xfs-4.12-fixes-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: don't allow bmap on rt files

Merge branch 'bnxt_en-fixes'

Michael Chan says:

====================
bnxt_en: Error handling and netpoll fixes.

Add missing error handling and fix netpoll handling. The current code
handles RX and TX events in netpoll mode and is causing lots of warnings
and errors in the RX code path in netpoll mode. The fix is to only handle
TX events in netpoll mode.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix netpoll handling.

To handle netpoll properly, the driver must only handle TX packets
during NAPI. Handling RX events cause warnings and errors in
netpoll mode. The ndo_poll_controller() method should call
napi_schedule() directly so that a NAPI weight of zero will be used
during netpoll mode.

The bnxt_en driver supports 2 ring modes: combined, and separate rx/tx.
In separate rx/tx mode, the ndo_poll_controller() method will only
process the tx rings. In combined mode, the rx and tx completion
entries are mixed in the completion ring and we need to drop the rx
entries and recycle the rx buffers.

Add a function bnxt_force_rx_discard() to handle this in netpoll mode
when we see rx entries in combined ring mode.

Reported-by: Calvin Owens <calvinowens@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Add missing logic to handle TPA end error conditions.

When we get a TPA_END completion to handle a completed LRO packet, it
is possible that hardware would indicate errors. The current code is
not checking for the error condition. Define the proper error bits and
the macro to check for this error and abort properly.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dp83640: Avoid NULL pointer dereference.

The function, skb_complete_tx_timestamp(), used to allow passing in a
NULL pointer for the time stamps, but that was changed in commit
62bccb8cdb69051b95a55ab0c489e3cab261c8ef ("net-timestamp: Make the
clone operation stand-alone from phy timestamping"), and the existing
call sites, all of which are in the dp83640 driver, were fixed up.

Even though the kernel-doc was subsequently updated in commit
7a76a021cd5a292be875fbc616daf03eab1e6996 ("net-timestamp: Update
skb_complete_tx_timestamp comment"), still a bug fix from Manfred
Rudigier came into the driver using the old semantics. Probably
Manfred derived that patch from an older kernel version.

This fix should be applied to the stable trees as well.

Fixes: 81e8f2e930fe ("net: dp83640: Fix tx timestamp overflow handling.")
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2017-06-23

1) Fix xfrm garbage collecting when unregistering a netdevice.
   From Hangbin Liu.

2) Fix NULL pointer derefernce when exiting a network namespace.
   From Hangbin Liu.

3) Fix some error codes in pfkey to prevent a NULL pointer derefernce.
   From Dan Carpenter.

4) Fix NULL pointer derefernce on allocation failure in pfkey.
   From Dan Carpenter.

5) Adjust IPv6 payload_len to include extension headers. Otherwise
   we corrupt the packets when doing ESP GRO on transport mode.
   From Yossi Kuperman.

6) Set nhoff to the proper offset of the IPv6 nexthdr when doing ESP GRO.
   From Yossi Kuperman.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sit: use __GFP_NOWARN for user controlled allocation

The memory allocation size is controlled by user-space,
if it is too large just fail silently and return NULL,
not to mention there is a fallback allocation later.

Reported-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: account for current skb length when deciding about UFO

Our customer encountered stuck NFS writes for blocks starting at specific
offsets w.r.t. page boundary caused by networking stack sending packets via
UFO enabled device with wrong checksum. The problem can be reproduced by
composing a long UDP datagram from multiple parts using MSG_MORE flag:

  sendto(sd, buff, 1000, MSG_MORE, ...);
  sendto(sd, buff, 1000, MSG_MORE, ...);
  sendto(sd, buff, 3000, 0, ...);

Assume this packet is to be routed via a device with MTU 1500 and
NETIF_F_UFO enabled. When second sendto() gets into __ip_append_data(),
this condition is tested (among others) to decide whether to call
ip_ufo_append_data():

  ((length + fragheaderlen) > mtu) || (skb && skb_is_gso(skb))

At the moment, we already have skb with 1028 bytes of data which is not
marked for GSO so that the test is false (fragheaderlen is usually 20).
Thus we append second 1000 bytes to this skb without invoking UFO. Third
sendto(), however, has sufficient length to trigger the UFO path so that we
end up with non-UFO skb followed by a UFO one. Later on, udp_send_skb()
uses udp_csum() to calculate the checksum but that assumes all fragments
have correct checksum in skb->csum which is not true for UFO fragments.

When checking against MTU, we need to add skb->len to length of new segment
if we already have a partially filled skb and fragheaderlen only if there
isn't one.

In the IPv6 case, skb can only be null if this is the first segment so that
we have to use headersize (length of the first IPv6 header) rather than
fragheaderlen (length of IPv6 header of further fragments) for skb == NULL.

Fixes: e89e9cf539a2 ("[IPv4/IPv6]: UFO Scatter-gather approach")
Fixes: e4c5e13aa45c ("ipv6: Should use consistent conditional judgement for
ip6 fragment between __ip6_append_data and ip6_finish_output")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Acked-by: Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dm raid: fix oops on upgrading to extended superblock format

When a RAID set was created on dm-raid version < 1.9.0 (old RAID
superblock format), all of the new 1.9.0 members of the superblock are
uninitialized (zero) -- including the device sectors member needed to
support shrinking.

All the other accesses to superblock fields new in 1.9.0 were reviewed
and verified to be properly guarded against invalid use. The 'sectors'
member was the only one used when the superblock version is < 1.9.

Don't access the superblock's >= 1.9.0 'sectors' member unconditionally.
Also add respective comments.

Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Merge tag 'perf-urgent-for-mingo-4.12-20170622' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull 'perf probe' fix from Arnaldo Carvalho de Melo:

- Do not double the offset of inline expansions when using
'perf probe' on inlined functions (Björn Töpel)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Input: synaptics-rmi4 - only read the F54 query registers which are used

The F54 driver is currently only using the first 6 bytes of F54 so there is
no need to read all 27 bytes. Some Dell systems (Dell XP13 9333 and
similar) have an issue with the touchpad or I2C bus when reading reports
larger then 16 bytes. Reads larger then 16 bytes are reported in two HID
reports. Something about the back to back reports seems to cause the next
read to report incorrect data. This results in F30 failing to load and the
click button failing to work.

Previous issues with the I2C controller or touchpad were addressed in:
commit 5b65c2a02966 ("HID: rmi: check sanity of the incoming report")

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=195949
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

cxl: Fixes for Coherent Accelerator Interface Architecture 2.0

A previous set of patches "cxl: Add support for Coherent Accelerator
Interface Architecture 2.0" has introduced a new support for the CAPI
cards. These patches have been tested on Simulation environment and
quite a bit of them have been tested on real hardware.

This patch brings new fixes after a series of tests carried out on new
equipment:
  - Add POWER9 definition.
  - Re-enable any masked interrupts when the AFU is not activated
    after resetting the AFU.
  - Remove the api cxl_is_psl8/9 which is no longer useful.
  - Do not dump CAPI1 registers.
  - Rewrite cxl_is_page_fault() function.
  - Do not register slb callack on P9.

Fixes: f24be42aab37 ("cxl: Add psl9 specific code")
Signed-off-by: Christophe Lombard <clombard@linux.vnet.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

powerpc/64: Initialise thread_info for emergency stacks

Emergency stacks have their thread_info mostly uninitialised, which in
particular means garbage preempt_count values.

Emergency stack code runs with interrupts disabled entirely, and is
used very rarely, so this has been unnoticed so far. It was found by a
proposed new powerpc watchdog that takes a soft-NMI directly from the
masked_interrupt handler and using the emergency stack. That crashed
at BUG_ON(in_nmi()) in nmi_enter(). preempt_count()s were found to be
garbage.

To fix this, zero the entire THREAD_SIZE allocation, and initialize
the thread_info.

Cc: stable@vger.kernel.org
Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Move it all into setup_64.c, use a function not a macro. Fix
crashes on Cell by setting preempt_count to 0 not HARDIRQ_OFFSET]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Merge tag 'drm-misc-fixes-2017-06-22' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes

UAPI Changes:
- drm: Fix regression in GETCONNECTOR ioctl returning stale properties (Daniel)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
* tag 'drm-misc-fixes-2017-06-22' of git://anongit.freedesktop.org/git/drm-misc:
drm: Fix GETCONNECTOR regression

kconfig: fix sparse warnings in nconfig

Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):

../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer

nconf.gui.o before/after files are the same.
nconf.o before/after files are the same until the 'static' function
declarations are added.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

perf probe: Fix probe definition for inlined functions

In commit 613f050d68a8 ("perf probe: Fix to probe on gcc generated
functions in modules"), the offset from symbol is, incorrectly, added
to the trace point address. This leads to incorrect probe trace points
for inlined functions and when using relative line number on symbols.

Prior this patch:
  $ perf probe -m nf_nat -D in_range
  p:probe/in_range nf_nat:in_range.isra.9+0
  $ perf probe -m i40e -D i40e_clean_rx_irq
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2212
  $ perf probe -m i40e -D i40e_clean_rx_irq:16
  p:probe/i40e_clean_rx_irq i40e:i40e_lan_xmit_frame+626

After:
  $ perf probe -m nf_nat -D in_range
  p:probe/in_range nf_nat:in_range.isra.9+0
  $ perf probe -m i40e -D i40e_clean_rx_irq
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+1106
  $ perf probe -m i40e -D i40e_clean_rx_irq:16
  p:probe/i40e_clean_rx_irq i40e:i40e_napi_poll+2665

Committer testing:

Using 'pfunct', a tool found in the 'dwarves' package [1], one can ask what are
the functions that while not being explicitely marked as inline, were inlined
by the compiler:

  # pfunct --cc_inlined /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko | head
  __ew32
  e1000_regdump
  e1000e_dump_ps_pages
  e1000_desc_unused
  e1000e_systim_to_hwtstamp
  e1000e_rx_hwtstamp
  e1000e_update_rdt_wa
  e1000e_update_tdt_wa
  e1000_put_txbuf
  e1000_consume_page

Then ask 'perf probe' to produce the kprobe_tracer probe definitions for two of
them:

  # perf probe -m e1000e -D e1000e_rx_hwtstamp
  p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+74

  # perf probe -m e1000e -D e1000_consume_page
  p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+876
  p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+1506
  p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074

Now lets concentrate on the 'e1000_consume_page' one, that was inlined twice in
e1000_clean_jumbo_rx_irq(), lets see what readelf says about the DWARF tags for
that function:

  $ readelf -wi /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
  <SNIP>
  <1><13e27b>: Abbrev Number: 121 (DW_TAG_subprogram)
    <13e27c>   DW_AT_name        : (indirect string, offset: 0xa8945): e1000_clean_jumbo_rx_irq
    <13e287>   DW_AT_low_pc      : 0x17a30
  <3><13e6ef>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13e6f0>   DW_AT_abstract_origin: <0x13ed2c>
    <13e6f4>   DW_AT_low_pc      : 0x17be6
  <SNIP>
  <1><13ed2c>: Abbrev Number: 142 (DW_TAG_subprogram)
     <13ed2e>   DW_AT_name        : (indirect string, offset: 0xa54c3): e1000_consume_page

So, the first time in e1000_clean_jumbo_rx_irq() where e1000_consume_page() is
inlined is at PC 0x17be6, which subtracted from e1000_clean_jumbo_rx_irq()'s
address, gives us the offset we should use in the probe definition:

  0x17be6 - 0x17a30 = 438

but above we have 876, which is twice as much.

Lets see the second inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():

  <3><13e86e>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13e86f>   DW_AT_abstract_origin: <0x13ed2c>
    <13e873>   DW_AT_low_pc      : 0x17d21

  0x17d21 - 0x17a30 = 753

So we where adding it at twice the offset from the containing function as we
should.

And then after this patch:

  # perf probe -m e1000e -D e1000e_rx_hwtstamp
  p:probe/e1000e_rx_hwtstamp e1000e:e1000_receive_skb+37

  # perf probe -m e1000e -D e1000_consume_page
  p:probe/e1000_consume_page e1000e:e1000_clean_jumbo_rx_irq+438
  p:probe/e1000_consume_page_1 e1000e:e1000_clean_jumbo_rx_irq+753
  p:probe/e1000_consume_page_2 e1000e:e1000_clean_jumbo_rx_irq+1353
  #

Which matches the two first expansions and shows that because we were
doubling the offset it would spill over the next function:

  readelf -sw /lib/modules/4.12.0-rc4+/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
   673: 0000000000017a30  1626 FUNC    LOCAL  DEFAULT    2 e1000_clean_jumbo_rx_irq
   674: 0000000000018090  2013 FUNC    LOCAL  DEFAULT    2 e1000_clean_rx_irq_ps

This is the 3rd inline expansion of e1000_consume_page() in
e1000_clean_jumbo_rx_irq():

   <3><13ec77>: Abbrev Number: 119 (DW_TAG_inlined_subroutine)
    <13ec78>   DW_AT_abstract_origin: <0x13ed2c>
    <13ec7c>   DW_AT_low_pc      : 0x17f79

  0x17f79 - 0x17a30 = 1353

So:

   0x17a30 + 2 * 1353 = 0x184c2

  And:

   0x184c2 - 0x18090 = 1074

Which explains the bogus third expansion for e1000_consume_page() to end up at:

   p:probe/e1000_consume_page_2 e1000e:e1000_clean_rx_irq_ps+1074

All fixed now :-)

[1] https://git.kernel.org/pub/scm/devel/pahole/pahole.git/

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 613f050d68a8 ("perf probe: Fix to probe on gcc generated functions in modules")
Link: http://lkml.kernel.org/r/20170621164134.5701-1-bjorn.topel@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Various small fixes for stable"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Fix some return values in case of error in 'crypt_message'
  cifs: remove redundant return in cifs_creation_time_get
  CIFS: Improve readdir verbosity
  CIFS: check if pages is null rather than bv for a failed allocation
  CIFS: Set ->should_dirty in cifs_user_readv()

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
"MIPS:
   - Fix build with KVM, DYNAMIC_DEBUG and JUMP_LABEL.

  PPC:
   - Fix host crashes/hangs on POWER9.
   - Properly restore userspace state after KVM_RUN ioctl.

  s390:
   - Fix address translation in odd-ball cases (real-space designation
     ASCEs).

  x86:
   - Fix privilege escalation in 64-bit Windows guests

  All patches are for stable and the x86 also has a CVE"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: fix singlestepping over syscall
  KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows
  KVM: MIPS: Fix maybe-uninitialized build failure
  KVM: PPC: Book3S HV: Ignore timebase offset on POWER9 DD1
  KVM: PPC: Book3S HV: Save/restore host values of debug registers
  KVM: PPC: Book3S HV: Preserve userspace HTM state properly
  KVM: PPC: Book3S HV: Restore critical SPRs to host values on guest exit
  KVM: PPC: Book3S HV: Context-switch EBB registers properly
  KVM: PPC: Book3S HV: Cope with host using large decrementer mode

Merge tag 'mfd-fixes-4.12' of git://git./linux/kernel/git/lee/mfd

Pull MFD fixes from Lee Jones:

- arizona: use address passed in, rather than hard coded value

- correct STM32 clock-names value in DT binding documentation

* tag 'mfd-fixes-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
dt-bindings: mfd: Update STM32 timers clock names
mfd: arizona: Fix typo using hard-coded register

sfc: Fix MCDI command size for filter operations

The 8000 series adapters uses catch-all filters for encapsulated traffic
to support filtering VXLAN, NVGRE and GENEVE traffic.
This new filter functionality requires a longer MCDI command.
This patch increases the size of buffers on stack that were missed, which
fixes a kernel panic from the stack protector.

Fixes: 9b41080125176 ("sfc: insert catch-all filters for encapsulated traffic")
Signed-off-by: Martin Habets <mhabets@solarflare.com>
Acked-by: Edward Cree <ecree@solarflare.com>
Acked-by: Bert Kenward bkenward@solarflare.com
Signed-off-by: David S. Miller <davem@davemloft.net>

netvsc: don't access netdev->num_rx_queues directly

This structure member is hidden behind CONFIG_SYSFS, and we
get a build error when that is disabled:

drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_channels':
drivers/net/hyperv/netvsc_drv.c:754:49: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'?
drivers/net/hyperv/netvsc_drv.c: In function 'netvsc_set_rxfh':
drivers/net/hyperv/netvsc_drv.c:1181:25: error: 'struct net_device' has no member named 'num_rx_queues'; did you mean 'num_tx_queues'?

As the value is only set once to the argument of alloc_netdev_mq(),
we can compare against that constant directly.

Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Fixes: 2b01888d1b45 ("netvsc: allow more flexible setting of number of channels")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: avoid unregistering inet6_dev for loopback

The per netns loopback_dev->ip6_ptr is unregistered and set to
NULL when its mtu is set to smaller than IPV6_MIN_MTU, this
leads to that we could set rt->rt6i_idev NULL after a
rt6_uncached_list_flush_dev() and then crash after another
call.

In this case we should just bring its inet6_dev down, rather
than unregistering it, at least prior to commit 176c39af29bc
("netns: fix addrconf_ifdown kernel panic") we always
override the case for loopback.

Thanks a lot to Andrey for finding a reliable reproducer.

Fixes: 176c39af29bc ("netns: fix addrconf_ifdown kernel panic")
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Daniel Lezcano <dlezcano@fr.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'macvlan-Fix-some-issues-with-changing-mac-addresses'

Vladislav Yasevich says:

====================
macvlan: Fix some issues with changing mac addresses

There are some issues in macvlan wrt to changing it's mac address.
* An error is returned in the specified address is the same as an already
  assigned address.
* In passthru mode, the mac address of the macvlan device doesn't change.
* After changing the mac address of a passthru macvlan and then removing it,
  the mac address of the physical device remains changed.

This patch series attempts to resolve these issues.

V2: Address a small issue in p4 where we save the address from the lowerdev
    (from girish.moodalbail@oracle.com)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

macvlan: Let passthru macvlan correctly restore lower mac address

Passthru macvlans directly change the mac address of the lower
level device. That's OK, but after the macvlan is deleted,
the lower device is left with changed address and one needs to
reboot to bring back the origina HW addresses.

This scenario is actually quite common with passthru macvtap devices.

This patch attempts to solve this, by storing the mac address
of the lower device in macvlan_port structure and keeping track of
it through the changes.

After this patch, any changes to the lower device mac address
done trough the macvlan device, will be reverted back. Any
changs done directly to the lower device mac address will be kept.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

macvlan: convert port passthru to flags.

Convert the port passthru boolean into flags with accesor functions.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

macvlan: Fix passthru macvlan mac address inheritance

When a lower device of the passthru macvlan changes it's address,
passthru macvlan is supposed to change it's own address as well.
However, that doesn't happen correctly because the check in
macvlan_addr_busy() will catch the fact that the lower level
(port) mac address is the same as the address we are trying to
assign to the macvlan, and return an error. As a reasult,
the address of the passthru macvlan device is never changed.

The same thing happens when the user attempts to change the
mac address of the passthru macvlan.

The simple solution appers to be to not check against
the lower device in case of passthru macvlan device, since
the 2 addresses are _supposed_ to be the same.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

macvlan: Do not return error when setting the same mac address

The user currently gets an EBUSY error when attempting to set
the mac address on a macvlan device to the same value.

This should really be a no-op as nothing changes. Catch
the condition and return early.

Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

xen-netback: correctly schedule rate-limited queues

Add a flag to indicate if a queue is rate-limited. Test the flag in
NAPI poll handler and avoid rescheduling the queue if true, otherwise
we risk locking up the host. The rescheduling will be done in the
timer callback function.

Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

veth: Be more robust on network device creation when no attributes

There are number of problems with configuration peer
network device in absence of IFLA_VETH_PEER attributes
where attributes for main network device shared with
peer.

First it is not feasible to configure both network
devices with same MAC address since this makes
communication in such configuration problematic.

This case can be reproduced with following sequence:

  # ip link add address 02:11:22:33:44:55 type veth
  # ip li sh
  ...
  26: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
  noop state DOWN mode DEFAULT qlen 1000
      link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff
  27: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc \
  noop state DOWN mode DEFAULT qlen 1000
      link/ether 00:11:22:33:44:55 brd ff:ff:ff:ff:ff:ff

Second it is not possible to register both main and
peer network devices with same name, that happens
when name for main interface is given with IFLA_IFNAME
and same attribute reused for peer.

This case can be reproduced with following sequence:

  # ip link add dev veth1a type veth
  RTNETLINK answers: File exists

To fix both of the cases check if corresponding netlink
attributes are taken from peer_tb when valid or
name based on rtnl ops kind and random address is used.

Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers: net: cpsw-common: Fix reading of mac address for am43 SoCs

cpsw driver tries to get macid for am43xx SoCs using the compatible
ti,am4372. But not all variants of am43x uses this complatible like
epos evm uses ti,am438x. So use a generic compatible ti,am43 to get
macid for all am43 based platforms.

Reviewed-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: only call ip6_route_dev_notify() once for NETDEV_UNREGISTER

In commit 242d3a49a2a1 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf")
I assumed NETDEV_REGISTER and NETDEV_UNREGISTER are paired,
unfortunately, as reported by jeffy, netdev_wait_allrefs()
could rebroadcast NETDEV_UNREGISTER event until all refs are
gone.

We have to add an additional check to avoid this corner case.
For netdev_wait_allrefs() dev->reg_state is NETREG_UNREGISTERED,
for dev_change_net_namespace(), dev->reg_state is
NETREG_REGISTERED. So check for dev->reg_state != NETREG_UNREGISTERED.

Fixes: 242d3a49a2a1 ("ipv6: reorder ip6_route_dev_notifier after ipv6_dev_notf")
Reported-by: jeffy <jeffy.chen@rock-chips.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/phy: micrel: configure intterupts after autoneg workaround

The commit ("net/phy: micrel: Add workaround for bad autoneg") fixes an
autoneg failure case by resetting the hardware. This turns off
intterupts. Things will work themselves out if the phy polls, as it will
figure out it's state during a poll. However if the phy uses only
intterupts, the phy will stall, since interrupts are off. This patch
fixes the issue by calling config_intr after resetting the phy.

Fixes: d2fd719bcb0e ("net/phy: micrel: Add workaround for bad autoneg ")
Signed-off-by: Zach Brown <zach.brown@ni.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

KVM: x86: fix singlestepping over syscall

TF is handled a bit differently for syscall and sysret, compared
to the other instructions: TF is checked after the instruction completes,
so that the OS can disable #DB at a syscall by adding TF to FMASK.
When the sysret is executed the #DB is taken "as if" the syscall insn
just completed.

KVM emulates syscall so that it can trap 32-bit syscall on Intel processors.
Fix the behavior, otherwise you could get #DB on a user stack which is not
nice. This does not affect Linux guests, as they use an IST or task gate
for #DB.

This fixes CVE-2017-7518.

Cc: stable@vger.kernel.org
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Merge tag 'kvm-s390-master-4.12-2' of git://git./linux/kernel/git/kvms390/linux

KVM: s390: fix shadow table handling for nested guests

Some odd-ball cases (real-space designation ASCEs) are handled wrong
for the shadow page tables. Fix it.

powerpc/powernv/npu-dma: Add explicit flush when sending an ATSD

NPU2 requires an extra explicit flush to an active GPU PID when
sending address translation shoot downs (ATSDs) to reliably flush the
GPU TLB. This patch adds just such a flush at the end of each sequence
of ATSDs.

We can safely use PID 0 which is always reserved and active on the
GPU. PID 0 is only used for init_mm which will never be a user mm on
the GPU. To enforce this we add a check in pnv_npu2_init_context()
just in case someone tries to use PID 0 on the GPU.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
[mpe: Use true/false for bool literals]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

KVM: s390: gaccess: fix real-space designation asce handling for gmap shadows

For real-space designation asces the asce origin part is only a token.
The asce token origin must not be used to generate an effective
address for storage references. This however is erroneously done
within kvm_s390_shadow_tables().

Furthermore within the same function the wrong parts of virtual
addresses are used to generate a corresponding real address
(e.g. the region second index is used as region first index).

Both of the above can result in incorrect address translations. Only
for real space designations with a token origin of zero and addresses
below one megabyte the translation was correct.

Furthermore replace a "!asce.r" statement with a "!*fake" statement to
make it more obvious that a specific condition has nothing to do with
the architecture, but with the fake handling of real space designations.

Fixes: 3218f7094b6b ("s390/mm: support real-space for gmap shadows")
Cc: David Hildenbrand <david@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>

ASoC: es8316: add I2C dependency

Without CONFIG_I2C, we get a build failure:

sound/soc/codecs/es8316.c:633:1: error: data definition has no type or storage class [-Werror]
sound/soc/codecs/es8316.c:633:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int]
sound/soc/codecs/es8316.c:633:1: error: parameter names (without types) in function declaration [-Werror]
sound/soc/codecs/es8316.c:623:26: error: 'es8316_i2c_driver' defined but not used [-Werror=unused-variable]

This adds the required Kconfig dependency.

Fixes: b8b88b70875a ("ASoC: add es8316 codec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: max9867: make array ni_div static const

The array ni_div does not need to be in global scope and is not
modified, so make it static const.

Cleans up sparse warning:
"symbol 'ni_div' was not declared. Should it be static?"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

perf/x86/intel: Add 1G DTLB load/store miss support for SKL

Current DTLB load/store miss events (0x608/0x649) only counts 4K,2M and
4M page size.
Need to extend the events to support any page size (4K/2M/4M/1G).

The complete DTLB load/store miss events are:

DTLB_LOAD_MISSES.WALK_COMPLETED 0xe08
DTLB_STORE_MISSES.WALK_COMPLETED 0xe49

Signed-off-by: Kan Liang <Kan.liang@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20170619142609.11058-1-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

i2c: imx: Use correct function to write to register

The i2c-imx driver incorrectly uses readb()/writeb() to read and
write to the appropriate registers when performing a repeated start.
The appropriate imx_i2c_read_reg()/imx_i2c_write_reg() functions
should be used instead. Performing a repeated start results in
a kernel panic. The platform is imx.

Signed-off-by: Michail G Etairidis <m.etairidis@beck-ipc.com>
Fixes: ce1a78840ff7 ("i2c: imx: add DMA support for freescale i2c driver")
Fixes: 054b62d9f25c ("i2c: imx: fix the i2c bus hang issue when do repeat restart")
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

esp6_offload: Fix IP6CB(skb)->nhoff for ESP GRO

IP6CB(skb)->nhoff is the offset of the nexthdr field in an IPv6
header, unless there are extension headers present, in which case
nhoff points to the nexthdr field of the last extension header.

In non-GRO code path, nhoff is set by ipv6_rcv before any XFRM code
is executed. Conversely, in GRO code path (when esp6_offload is loaded),
nhoff is not set. The following functions fail to read the correct value
and eventually the packet is dropped:

    xfrm6_transport_finish
    xfrm6_tunnel_input
    xfrm6_rcv_tnl

Set nhoff to the proper offset of nexthdr in esp6_gro_receive.

Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

xfrm6: Fix IPv6 payload_len in xfrm6_transport_finish

IPv6 payload length indicates the size of the payload, including any
extension headers.

In xfrm6_transport_finish, ipv6_hdr(skb)->payload_len is set to the
payload size only, regardless of the presence of any extension headers.
After ESP GRO transport mode decapsulation, ipv6_rcv trims the packet
according to the wrong payload_len, thus corrupting the packet.

Set payload_len to account for extension headers as well.

Fixes: 7785bba299a8 ("esp: Add a software GRO codepath")
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
"This contains a set of fixes for xen-blkback by way of Konrad, and a
  performance regression fix for blk-mq for shared tags.

  The latter could account for as much as a 50x reduction in
  performance, with the test case from the user with 500 name spaces. A
  more realistic setup on my end with 32 drives showed a 3.5x drop. The
  fix has been thoroughly tested before being committed"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: fix performance regression with shared tags
  xen-blkback: don't leak stack data via response ring
  xen/blkback: don't use xen_blkif_get() in xen-blkback kthread
  xen/blkback: don't free be structure too early
  xen/blkback: fix disconnect while I/Os in flight

xfs: don't allow bmap on rt files

bmap returns a dumb LBA address but not the block device that goes with
that LBA. Swapfiles don't care about this and will blindly assume that
the data volume is the correct blockdev, which is totally bogus for
files on the rt subvolume. This results in the swap code doing IOs to
arbitrary locations on the data device(!) if the passed in mapping is a
realtime file, so just turn off bmap for rt files.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>

kbuild: fix header installation under fakechroot environment

Since commit fcc8487d477a ("uapi: export all headers under uapi
directories") fakechroot make bindeb-pkg fails, mismatching files for
directories:
touch: cannot touch 'usr/include/video/uvesafb.h/.install': Not a
directory

This due to a bug in fakechroot:
when using the function $(wildcard $(srcdir)/*/.) in a makefile, under a
fakechroot environment, not only directories but also files are
returned.

To circumvent that, we are using the functions:
$(sort $(dir $(wildcard $(srcdir)/*/))))

Fixes: fcc8487d477a ("uapi: export all headers under uapi directories")
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

ACPI / scan: Fix enumeration for special SPI and I2C devices

Commit f406270bf73d ("ACPI / scan: Set the visited flag for all
enumerated devices") caused that two group of special SPI or I2C
devices do not enumerate. SPI and I2C devices are expected to be
enumerated by the SPI and I2C subsystems but change caused that
acpi_bus_attach() marks those devices with acpi_device_set_enumerated().

First group of devices are matched using Device Tree compatible property
with special _HID "PRP0001". Those devices have matched scan handler,
acpi_scan_attach_handler() retuns 1 and acpi_bus_attach() marks them
with acpi_device_set_enumerated().

Second group of devices without valid _HID such as "LNXVIDEO" have
device->pnp.type.platform_id set to zero and change again marks them
with acpi_device_set_enumerated().

Fix this by flagging the SPI and I2C devices during struct acpi_device
object initialization time and let the code in acpi_bus_attach() to go
through the device_attach() and acpi_default_enumeration() path for all
SPI and I2C devices.

Fixes: f406270bf73d (ACPI / scan: Set the visited flag for all enumerated devices)
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: 4.11+ <stable@vger.kernel.org> # 4.11+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix refcounting wrt timers which hold onto inet6 address objects,
    from Xin Long.

2) Fix an ancient bug in wireless wext ioctls, from Johannes Berg.

3) Firmware handling fixes in brcm80211 driver, from Arend Van Spriel.

4) Several mlx5 driver fixes (firmware readiness, timestamp cap
    reporting, devlink command validity checking, tc offloading, etc.)
    From Eli Cohen, Maor Dickman, Chris Mi, and Or Gerlitz.

5) Fix dst leak in IP/IP6 tunnels, from Haishuang Yan.

6) Fix dst refcount bug in decnet, from Wei Wang.

7) Netdev can be double freed in register_vlan_device(). Fix from Gao
    Feng.

8) Don't allow object to be destroyed while it is being dumped in SCTP,
    from Xin Long.

9) Fix dpaa_eth build when modular, from Madalin Bucur.

10) Fix throw route leaks, from Serhey Popovych.

11) IFLA_GROUP missing from if_nlmsg_size() and ifla_policy[] table,
    also from Serhey Popovych.

12) Fix premature TX SKB free in stmmac, from Niklas Cassel.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
  igmp: add a missing spin_lock_init()
  net: stmmac: free an skb first when there are no longer any descriptors using it
  sfc: remove duplicate up_write on VF filter_sem
  rtnetlink: add IFLA_GROUP to ifla_policy
  ipv6: Do not leak throw route references
  dt-bindings: net: sms911x: Add missing optional VDD regulators
  dpaa_eth: reuse the dma_ops provided by the FMan MAC device
  fsl/fman: propagate dma_ops
  net/core: remove explicit do_softirq() from busy_poll_stop()
  fib_rules: Resolve goto rules target on delete
  sctp: ensure ep is not destroyed before doing the dump
  net/hns:bugfix of ethtool -t phy self_test
  net: 8021q: Fix one possible panic caused by BUG_ON in free_netdev
  cxgb4: notify uP to route ctrlq compl to rdma rspq
  ip6_tunnel: Correct tos value in collect_md mode
  decnet: always not take dst->__refcnt when inserting dst into hash table
  ip6_tunnel: fix potential issue in __ip6_tnl_rcv
  ip_tunnel: fix potential issue in ip_tunnel_rcv
  brcmfmac: fix uninitialized warning in brcmf_usb_probe_phase2()
  net/mlx5e: Avoid doing a cleanup call if the profile doesn't have it
  ...

Merge tag 'pinctrl-v4.12-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull more pin control fixes from Linus Walleij:
"Some late arriving fixes. I should have sent earlier, just swamped
  with work as usual. Thomas patch makes AMD systems usable despite
  firmware bugs so it is fairly important.

   - Make the AMD driver use a regular interrupt rather than a chained
     one, so the system does not lock up.

   - Fix a function call error deep inside the STM32 driver"

* tag 'pinctrl-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: Fix bad function call
  pinctrl/amd: Use regular interrupt instead of chained

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

Pull HID fixes from Jiri Kosina:

- revert of a commit to magicmouse driver that regressess certain
   devices, from Daniel Stone

- quirk for a specific Dell mouse, from Sebastian Parschauer

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  Revert "HID: magicmouse: Set multi-touch keybits for Magic Mouse"
  HID: Add quirk for Dell PIXART OEM mouse

Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/livepatching

Pull livepatching fix from Jiri Kosina:
"Fix the way how livepatches are being stacked with respect to RCU,
from Petr Mladek"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: Fix stacking of patches with respect to RCU

Merge branch 'ufs-fixes' of git://git./linux/kernel/git/viro/vfs

Pull more ufs fixes from Al Viro:
"More UFS fixes, unfortunately including build regression fix for the
  64-bit s_dsize commit. Fixed in this pile:

   - trivial bug in signedness of 32bit timestamps on ufs1

   - ESTALE instead of ufs_error() when doing open-by-fhandle on
     something deleted

   - build regression on 32bit in ufs_new_fragments() - calculating that
     many percents of u64 pulls libgcc stuff on some of those. Mea
     culpa.

   - fix hysteresis loop broken by typo in 2.4.14.7 (right next to the
     location of previous bug).

   - fix the insane limits of said hysteresis loop on filesystems with
     very low percentage of reserved blocks. If it's 5% or less, just
     use the OPTSPACE policy.

   - calculate those limits once and mount time.

  This tree does pass xfstests clean (both ufs1 and ufs2) and it _does_
  survive cross-builds.

  Again, my apologies for missing that, especially since I have noticed
  a related percentage-of-64bit issue in earlier patches (when dealing
  with amount of reserved blocks). Self-LART applied..."

* 'ufs-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ufs: fix the logics for tail relocation
  ufs_iget(): fail with -ESTALE on deleted inode
  fix signedness of timestamps on ufs1

Allow stack to grow up to address space limit

Fix expand_upwards() on architectures with an upward-growing stack (parisc,
metag and partly IA-64) to allow the stack to reliably grow exactly up to
the address space limit given by TASK_SIZE.

Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix new crash in unmapped_area_topdown()

Trinity gets kernel BUG at mm/mmap.c:1963! in about 3 minutes of
mmap testing.  That's the VM_BUG_ON(gap_end < gap_start) at the
end of unmapped_area_topdown().  Linus points out how MAP_FIXED
(which does not have to respect our stack guard gap intentions)
could result in gap_end below gap_start there.  Fix that, and
the similar case in its alternative, unmapped_area().

Cc: stable@vger.kernel.org
Fixes: 1be7107fbe18 ("mm: larger stack guard gap, between vmas")
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Debugged-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

blk-mq: fix performance regression with shared tags

If we have shared tags enabled, then every IO completion will trigger
a full loop of every queue belonging to a tag set, and every hardware
queue for each of those queues, even if nothing needs to be done.
This causes a massive performance regression if you have a lot of
shared devices.

Instead of doing this huge full scan on every IO, add an atomic
counter to the main queue that tracks how many hardware queues have
been marked as needing a restart. With that, we can avoid looking for
restartable queues, if we don't have to.

Max reports that this restores performance. Before this patch, 4K
IOPS was limited to 22-23K IOPS. With the patch, we are running at
950-970K IOPS.

Fixes: 6d8c6c0f97ad ("blk-mq: Restart a single queue if tag sets are shared")
Reported-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Tested-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

dm io: fix duplicate bio completion due to missing ref count

If only a subset of the devices associated with multiple regions support
a given special operation (eg. DISCARD) then the dec_count() that is
used to set error for the region must increment the io->count.

Otherwise, when the dec_count() is called it can cause the dm-io
caller's bio to be completed multiple times. As was reported against
the dm-mirror target that had mirror legs with a mix of discard
capabilities.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=196077
Reported-by: Zhang Yi <yizhan@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

dm integrity: fix to not disable/enable interrupts from interrupt context

Use spin_lock_irqsave and spin_unlock_irqrestore rather than
spin_{lock,unlock}_irq in submit_flush_bio().

Otherwise lockdep issues the following warning:
DEBUG_LOCKS_WARN_ON(current->hardirq_context)
WARNING: CPU: 1 PID: 0 at kernel/locking/lockdep.c:2748 trace_hardirqs_on_caller+0x107/0x180

Reported-by: Ondrej Kozina <okozina@redhat.com>
Tested-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Acked-by: Mikulas Patocka <mpatocka@redhat.com>

ASoC: rsnd: fixup unsigned expression compared with zero: main_rate

This patch fixes this WARNING

sound/soc/sh/rcar/ssi.c:285:5-14: WARNING: Unsigned expression\
compared with zero: main_rate < 0

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

ASoC: fsl: mpc5200_dma: remove unused psc_dma

linux/sound/soc/fsl/mpc5200_dma.c:305:18: warning: unused variable \
psc_dma’ [-Wunused-variable]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

perf/aux: Correct return code of rb_alloc_aux() if !has_aux(ev)

If the event for which an AUX area is about to be allocated, does
not support setting up an AUX area, rb_alloc_aux() return -ENOTSUPP.

This error condition is being returned unfiltered to the user space,
and, for example, the perf tools fails with:

  failed to mmap with 524 (INTERNAL ERROR: strerror_r(524, 0x3fff497a1c8, 512)=22)

This error can be easily seen with "perf record -m 128,256 -e cpu-clock".

The 524 error code maps to -ENOTSUPP (in rb_alloc_aux()). The -ENOTSUPP
error code shall be only used within the kernel.  So the correct error
code would then be -EOPNOTSUPP.

With this commit, the perf tool then reports:

  failed to mmap with 95 (Operation not supported)

which is more clear.

Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Hou <bjhoupu@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: acme@kernel.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/1497954399-6355-1-git-send-email-brueckner@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

drm: Fix GETCONNECTOR regression

In

commit 91eefc05f0ac71902906b2058360e61bd25137fe
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Dec 14 00:08:10 2016 +0100

drm: Tighten locking in drm_mode_getconnector

I reordered the logic a bit in that IOCTL, but that broke userspace
since it'll get the new mode list, but not the new property values.
Fix that again.

v2: Fix up the error path handling when copy_to_user for the modes
failes (Dhinakaran).

Fixes: 91eefc05f0ac ("drm: Tighten locking in drm_mode_getconnector")
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.freedesktop.org
Reported-by: "H.J. Lu" <hjl.tools@gmail.com>
Tested-by: "H.J. Lu" <hjl.tools@gmail.com>
Cc: <stable@vger.kernel.org> # v4.11+
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100576
Cc: "H.J. Lu" <hjl.tools@gmail.com>
Cc: "Pandiyan, Dhinakaran" <dhinakaran.pandiyan@intel.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170620202837.1701-1-daniel.vetter@ffwll.ch