Qu Wenruo [Thu, 12 Apr 2018 22:32:47 +0000 (06:32 +0800)]
btrfs: Only check first key for committed tree blocks
When looping btrfs/074 with many cpus (>= 8), it's possible to trigger
kernel warning due to first key verification:
[ 4239.523446] WARNING: CPU: 5 PID: 2381 at fs/btrfs/disk-io.c:460 btree_read_extent_buffer_pages+0x1ad/0x210
[ 4239.523830] Modules linked in:
[ 4239.524630] RIP: 0010:btree_read_extent_buffer_pages+0x1ad/0x210
[ 4239.527101] Call Trace:
[ 4239.527251] read_tree_block+0x42/0x70
[ 4239.527434] read_node_slot+0xd2/0x110
[ 4239.527632] push_leaf_right+0xad/0x1b0
[ 4239.527809] split_leaf+0x4ea/0x700
[ 4239.527988] ? leaf_space_used+0xbc/0xe0
[ 4239.528192] ? btrfs_set_lock_blocking_rw+0x99/0xb0
[ 4239.528416] btrfs_search_slot+0x8cc/0xa40
[ 4239.528605] btrfs_insert_empty_items+0x71/0xc0
[ 4239.528798] __btrfs_run_delayed_refs+0xa98/0x1680
[ 4239.529013] btrfs_run_delayed_refs+0x10b/0x1b0
[ 4239.529205] btrfs_commit_transaction+0x33/0xaf0
[ 4239.529445] ? start_transaction+0xa8/0x4f0
[ 4239.529630] btrfs_alloc_data_chunk_ondemand+0x1b0/0x4e0
[ 4239.529833] btrfs_check_data_free_space+0x54/0xa0
[ 4239.530045] btrfs_delalloc_reserve_space+0x25/0x70
[ 4239.531907] btrfs_direct_IO+0x233/0x3d0
[ 4239.532098] generic_file_direct_write+0xcb/0x170
[ 4239.532296] btrfs_file_write_iter+0x2bb/0x5f4
[ 4239.532491] aio_write+0xe2/0x180
[ 4239.532669] ? lock_acquire+0xac/0x1e0
[ 4239.532839] ? __might_fault+0x3e/0x90
[ 4239.533032] do_io_submit+0x594/0x860
[ 4239.533223] ? do_io_submit+0x594/0x860
[ 4239.533398] SyS_io_submit+0x10/0x20
[ 4239.533560] ? SyS_io_submit+0x10/0x20
[ 4239.533729] do_syscall_64+0x75/0x1d0
[ 4239.533979] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[ 4239.534182] RIP: 0033:0x7f8519741697
The problem here is, at btree_read_extent_buffer_pages() we don't have
acquired read/write lock on that extent buffer, only basic info like
level/bytenr is reliable.
So race condition leads to such false alert.
However in current call site, it's impossible to acquire proper lock
without race window.
To fix the problem, we only verify first key for committed tree blocks
(whose generation is no larger than fs_info->last_trans_committed), so
the content of such tree blocks will not change and there is no need to
get read/write lock.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes: 581c1760415c ("btrfs: Validate child tree block's level and first key")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 3 Apr 2018 17:23:33 +0000 (19:23 +0200)]
btrfs: add SPDX header to Kconfig
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 3 Apr 2018 17:23:33 +0000 (19:23 +0200)]
btrfs: replace GPL boilerplate by SPDX -- sources
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 3 Apr 2018 17:16:55 +0000 (19:16 +0200)]
btrfs: replace GPL boilerplate by SPDX -- headers
Remove GPL boilerplate text (long, short, one-line) and keep the rest,
ie. personal, company or original source copyright statements. Add the
SPDX header.
Unify the include protection macros to match the file names.
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 5 Apr 2018 21:55:12 +0000 (22:55 +0100)]
Btrfs: fix loss of prealloc extents past i_size after fsync log replay
Currently if we allocate extents beyond an inode's i_size (through the
fallocate system call) and then fsync the file, we log the extents but
after a power failure we replay them and then immediately drop them.
This behaviour happens since about 2009, commit
c71bf099abdd ("Btrfs:
Avoid orphan inodes cleanup while replaying log"), because it marks
the inode as an orphan instead of dropping any extents beyond i_size
before replaying logged extents, so after the log replay, and while
the mount operation is still ongoing, we find the inode marked as an
orphan and then perform a truncation (drop extents beyond the inode's
i_size). Because the processing of orphan inodes is still done
right after replaying the log and before the mount operation finishes,
the intention of that commit does not make any sense (at least as
of today). However reverting that behaviour is not enough, because
we can not simply discard all extents beyond i_size and then replay
logged extents, because we risk dropping extents beyond i_size created
in past transactions, for example:
add prealloc extent beyond i_size
fsync - clears the flag BTRFS_INODE_NEEDS_FULL_SYNC from the inode
transaction commit
add another prealloc extent beyond i_size
fsync - triggers the fast fsync path
power failure
In that scenario, we would drop the first extent and then replay the
second one. To fix this just make sure that all prealloc extents
beyond i_size are logged, and if we find too many (which is far from
a common case), fallback to a full transaction commit (like we do when
logging regular extents in the fast fsync path).
Trivial reproducer:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ xfs_io -f -c "pwrite -S 0xab 0 256K" /mnt/foo
$ sync
$ xfs_io -c "falloc -k 256K 1M" /mnt/foo
$ xfs_io -c "fsync" /mnt/foo
<power failure>
# mount to replay log
$ mount /dev/sdb /mnt
# at this point the file only has one extent, at offset 0, size 256K
A test case for fstests follows soon, covering multiple scenarios that
involve adding prealloc extents with previous shrinking truncates and
without such truncates.
Fixes: c71bf099abdd ("Btrfs: Avoid orphan inodes cleanup while replaying log")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Fri, 30 Mar 2018 22:11:56 +0000 (06:11 +0800)]
Btrfs: clean up resources during umount after trans is aborted
Currently if some fatal errors occur, like all IO get -EIO, resources
would be cleaned up when
a) transaction is being committed or
b) BTRFS_FS_STATE_ERROR is set
However, in some rare cases, resources may be left alone after transaction
gets aborted and umount may run into some ASSERT(), e.g.
ASSERT(list_empty(&block_group->dirty_list));
For case a), in btrfs_commit_transaciton(), there're several places at the
beginning where we just call btrfs_end_transaction() without cleaning up
resources. For case b), it is possible that the trans handle doesn't have
any dirty stuff, then only trans hanlde is marked as aborted while
BTRFS_FS_STATE_ERROR is not set, so resources remain in memory.
This makes btrfs also check BTRFS_FS_STATE_TRANS_ABORTED to make sure that
all resources won't stay in memory after umount.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 5 Apr 2018 07:40:15 +0000 (10:40 +0300)]
btrfs: Fix possible softlock on single core machines
do_chunk_alloc implements a loop checking whether there is a pending
chunk allocation and if so causes the caller do loop. Generally this
loop is executed only once, however testing with btrfs/072 on a single
core vm machines uncovered an extreme case where the system could loop
indefinitely. This is due to a missing cond_resched when loop which
doesn't give a chance to the previous chunk allocator finish its job.
The fix is to simply add the missing cond_resched.
Fixes: 6d74119f1a3e ("Btrfs: avoid taking the chunk_mutex in do_chunk_alloc")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Mon, 2 Apr 2018 17:59:48 +0000 (01:59 +0800)]
Btrfs: bail out on error during replay_dir_deletes
If errors were returned by btrfs_next_leaf(), replay_dir_deletes needs
to bail out, otherwise @ret would be forced to be 0 after 'break;' and
the caller won't be aware of it.
Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Mon, 2 Apr 2018 17:59:47 +0000 (01:59 +0800)]
Btrfs: fix NULL pointer dereference in log_dir_items
0, 1 and <0 can be returned by btrfs_next_leaf(), and when <0 is
returned, path->nodes[0] could be NULL, log_dir_items lacks such a
check for <0 and we may run into a null pointer dereference panic.
Fixes: e02119d5a7b4 ("Btrfs: Add a write ahead tree log to optimize synchronous operations")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 1 Mar 2018 16:56:34 +0000 (17:56 +0100)]
btrfs: lift errors from add_extent_changeset to the callers
The missing error handling in add_extent_changeset was hidden, so make
it at least visible in the callers.
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 28 Mar 2018 22:11:45 +0000 (06:11 +0800)]
Btrfs: print error messages when failing to read trees
When mount fails to read trees like fs tree, checksum tree, extent
tree, etc, there is not enough information about where went wrong.
With this, messages like
"BTRFS warning (device sdf): failed to read root (objectid=7): -5"
would help us a bit.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 26 Mar 2018 16:29:41 +0000 (18:29 +0200)]
btrfs: user proper type for btrfs_mask_flags flags
All users pass a local unsigned int and not the __uXX types that are
supposed to be used for userspace interfaces.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Sat, 24 Mar 2018 01:11:38 +0000 (02:11 +0100)]
btrfs: split dev-replace locking helpers for read and write
The current calls are unclear in what way btrfs_dev_replace_lock takes
the locks, so drop the argument, split the helpers and use similar
naming as for read and write locks.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 27 Mar 2018 18:08:28 +0000 (20:08 +0200)]
btrfs: remove stale comments about fs_mutex
The fs_mutex has been killed in 2008,
a213501153fd66e2 ("Btrfs: Replace
the big fs_mutex with a collection of other locks"), still remembered in
some comments.
We don't have any extra needs for locking in the ACL handlers.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 16 Mar 2018 02:27:02 +0000 (03:27 +0100)]
btrfs: use RCU in btrfs_show_devname for device list traversal
The show_devname callback is used to print device name in
/proc/self/mounts, we need to traverse the device list consistently and
read the name that's copied to a seq buffer so we don't need further
locking.
If the first device is being deleted at the same time, the RCU will
allow us to read the device name, though it will become stale right
after the RCU protection ends. This is unavoidable and the user can
expect that the device will disappear from the filesystem's list at some
point.
The device_list_mutex was pretty heavy as it is used eg. for writing
superblock and a few other IO related contexts. This can stall any
application that reads the proc file for no reason.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 16 Mar 2018 01:39:40 +0000 (02:39 +0100)]
btrfs: update barrier in should_cow_block
Once there was a simple int force_cow that was used with the plain
barriers, and then converted to a bit, so we should use the appropriate
barrier helper.
Other variables in the complex if condition do not depend on a barrier,
so we should be fine in case the atomic barrier becomes a no-op.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 16 Mar 2018 01:21:22 +0000 (02:21 +0100)]
btrfs: use lockdep_assert_held for mutexes
Using lockdep_assert_held is preferred, replace mutex_is_locked.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 16 Mar 2018 01:21:22 +0000 (02:21 +0100)]
btrfs: use lockdep_assert_held for spinlocks
Using lockdep_assert_held is preferred, replace assert_spin_locked.
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 29 Mar 2018 01:08:11 +0000 (09:08 +0800)]
btrfs: Validate child tree block's level and first key
We have several reports about node pointer points to incorrect child
tree blocks, which could have even wrong owner and level but still with
valid generation and checksum.
Although btrfs check could handle it and print error message like:
leaf parent key incorrect
60670574592
Kernel doesn't have enough check on this type of corruption correctly.
At least add such check to read_tree_block() and btrfs_read_buffer(),
where we need two new parameters @level and @first_key to verify the
child tree block.
The new @level check is mandatory and all call sites are already
modified to extract expected level from its call chain.
While @first_key is optional, the following call sites are skipping such
check:
1) Root node/leaf
As ROOT_ITEM doesn't contain the first key, skip @first_key check.
2) Direct backref
Only parent bytenr and level is known and we need to resolve the key
all by ourselves, skip @first_key check.
Another note of this verification is, it needs extra info from nodeptr
or ROOT_ITEM, so it can't fit into current tree-checker framework, which
is limited to node/leaf boundary.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 27 Mar 2018 12:44:18 +0000 (20:44 +0800)]
btrfs: tests/qgroup: Fix wrong tree backref level
The extent tree of the test fs is like the following:
BTRFS info (device (null)): leaf
16327509003777336587 total ptrs 1 free space 3919
item 0 key (4096 168 4096) itemoff 3944 itemsize 51
extent refs 1 gen 1 flags 2
tree block key (
68719476736 0 0) level 1
^^^^^^^
ref#0: tree block backref root 5
And it's using an empty tree for fs tree, so there is no way that its
level can be 1.
For REAL (created by mkfs) fs tree backref with no skinny metadata, the
result should look like:
item 3 key (
30408704 EXTENT_ITEM 4096) itemoff 3845 itemsize 51
refs 1 gen 4 flags TREE_BLOCK
tree block key (256 INODE_ITEM 0) level 0
^^^^^^^
tree block backref root 5
Fix the level to 0, so it won't break later tree level checker.
Fixes: faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 26 Mar 2018 22:59:12 +0000 (23:59 +0100)]
Btrfs: fix copy_items() return value when logging an inode
When logging an inode, at tree-log.c:copy_items(), if we call
btrfs_next_leaf() at the loop which checks for the need to log holes, we
need to make sure copy_items() returns the value 1 to its caller and
not 0 (on success). This is because the path the caller passed was
released and is now different from what is was before, and the caller
expects a return value of 0 to mean both success and that the path
has not changed, while a return value of 1 means both success and
signals the caller that it can not reuse the path, it has to perform
another tree search.
Even though this is a case that should not be triggered on normal
circumstances or very rare at least, its consequences can be very
unpredictable (especially when replaying a log tree).
Fixes: 16e7549f045d ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Mon, 26 Mar 2018 22:59:00 +0000 (23:59 +0100)]
Btrfs: fix fsync after hole punching when using no-holes feature
When we have the no-holes mode enabled and fsync a file after punching a
hole in it, we can end up not logging the whole hole range in the log tree.
This happens if the file has extent items that span more than one leaf and
we punch a hole that covers a range that starts in a leaf but does not go
beyond the offset of the first extent in the next leaf.
Example:
$ mkfs.btrfs -f -O no-holes -n 65536 /dev/sdb
$ mount /dev/sdb /mnt
$ for ((i = 0; i <= 831; i++)); do
offset=$((i * 2 * 256 * 1024))
xfs_io -f -c "pwrite -S 0xab -b 256K $offset 256K" \
/mnt/foobar >/dev/null
done
$ sync
# We now have 2 leafs in our filesystem fs tree, the first leaf has an
# item corresponding the extent at file offset
216530944 and the second
# leaf has a first item corresponding to the extent at offset
217055232.
# Now we punch a hole that partially covers the range of the extent at
# offset
216530944 but does go beyond the offset
217055232.
$ xfs_io -c "fpunch $((
216530944 + 128 * 1024 - 4000)) 256K" /mnt/foobar
$ xfs_io -c "fsync" /mnt/foobar
<power fail>
# mount to replay the log
$ mount /dev/sdb /mnt
# Before this patch, only the subrange [
216658016,
216662016[ (length of
# 4000 bytes) was logged, leaving an incorrect file layout after log
# replay.
Fix this by checking if there is a hole between the last extent item that
we processed and the first extent item in the next leaf, and if there is
one, log an explicit hole extent item.
Fixes: 16e7549f045d ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 27 Mar 2018 17:04:50 +0000 (19:04 +0200)]
btrfs: use helper to set ulist aux from a qgroup
We have a nice helper to do proper casting of a qgroup to a ulist aux
value. And several places that could make use of it.
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:36 +0000 (15:34 +0800)]
Revert "btrfs: qgroups: Retry after commit on getting EDQUOT"
This reverts commit
48a89bc4f2ceab87bc858a8eb189636b09c846a7.
The idea to commit transaction and free some space after hitting qgroup
limit is good, although the problem is it can easily cause deadlocks.
One deadlock example is caused by trying to flush data while still
holding it:
Call Trace:
__schedule+0x49d/0x10f0
schedule+0xc6/0x290
schedule_timeout+0x187/0x1c0
wait_for_completion+0x204/0x3a0
btrfs_wait_ordered_extents+0xa40/0xaf0 [btrfs]
qgroup_reserve+0x913/0xa10 [btrfs]
btrfs_qgroup_reserve_data+0x3ef/0x580 [btrfs]
btrfs_check_data_free_space+0x96/0xd0 [btrfs]
__btrfs_buffered_write+0x3ac/0xd40 [btrfs]
btrfs_file_write_iter+0x62a/0xba0 [btrfs]
__vfs_write+0x320/0x430
vfs_write+0x107/0x270
SyS_write+0xbf/0x150
do_syscall_64+0x1b0/0x3d0
entry_SYSCALL64_slow_path+0x25/0x25
Another can be caused by trying to commit one transaction while nesting
with trans handle held by ourselves:
btrfs_start_transaction()
|- btrfs_qgroup_reserve_meta_pertrans()
|- qgroup_reserve()
|- btrfs_join_transaction()
|- btrfs_commit_transaction()
The retry is causing more problems than exppected when limit is enabled.
At least a graceful EDQUOT is way better than deadlock.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:35 +0000 (15:34 +0800)]
btrfs: qgroup: Update trace events for metadata reservation
Now trace_qgroup_meta_reserve() will have extra type parameter.
And introduce two new trace events:
1) trace_qgroup_meta_free_all_pertrans()
For btrfs_qgroup_free_meta_all_pertrans()
2) trace_qgroup_meta_convert()
For btrfs_qgroup_convert_reserved_meta()
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:34 +0000 (15:34 +0800)]
btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space
For quota disabled->enable case, it's possible that at reservation time
quota was not enabled so no bytes were really reserved, while at release
time, quota was enabled so we will try to release some bytes we didn't
really own.
Such situation can cause metadata reserveation underflow, for both types,
also less possible for per-trans type since quota enable will commit
transaction.
To address this, record qgroup meta reserved bytes into
root::qgroup_meta_rsv_pertrans and ::prealloc.
So at releasing time we won't free any bytes we didn't reserve.
For DATA, it's already handled by io_tree, so nothing needs to be done
there.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:33 +0000 (15:34 +0800)]
btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item
Quite similar for delalloc, some modification to delayed-inode and
delayed-item reservation. Also needs extra parameter for release case
to distinguish normal release and error release.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:32 +0000 (15:34 +0800)]
btrfs: qgroup: Use separate meta reservation type for delalloc
Before this patch, btrfs qgroup is mixing per-transcation meta rsv with
preallocated meta rsv, making it quite easy to underflow qgroup meta
reservation.
Since we have the new qgroup meta rsv types, apply it to delalloc
reservation.
Now for delalloc, most of its reserved space will use META_PREALLOC qgroup
rsv type.
And for callers reducing outstanding extent like btrfs_finish_ordered_io(),
they will convert corresponding META_PREALLOC reservation to
META_PERTRANS.
This is mainly due to the fact that current qgroup numbers will only be
updated in btrfs_commit_transaction(), that's to say if we don't keep
such placeholder reservation, we can exceed qgroup limitation.
And for callers freeing outstanding extent in error handler, we will
just free META_PREALLOC bytes.
This behavior makes callers of btrfs_qgroup_release_meta() or
btrfs_qgroup_convert_meta() to be aware of which type they are.
So in this patch, btrfs_delalloc_release_metadata() and its callers get
an extra parameter to info qgroup to do correct meta convert/release.
The good news is, even we use the wrong type (convert or free), it won't
cause obvious bug, as prealloc type is always in good shape, and the
type only affects how per-trans meta is increased or not.
So the worst case will be at most metadata limitation can be sometimes
exceeded (no convert at all) or metadata limitation is reached too soon
(no free at all).
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:31 +0000 (15:34 +0800)]
btrfs: qgroup: Introduce function to convert META_PREALLOC into META_PERTRANS
For meta_prealloc reservation users, after btrfs_join_transaction()
caller will modify tree so part (or even all) meta_prealloc reservation
should be converted to meta_pertrans until transaction commit time.
This patch introduces a new function,
btrfs_qgroup_convert_reserved_meta() to do this for META_PREALLOC
reservation user.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:30 +0000 (15:34 +0800)]
btrfs: qgroup: Don't use root->qgroup_meta_rsv for qgroup
Since qgroup has seperate metadata reservation types now, we can
completely get rid of the old root->qgroup_meta_rsv, which mostly acts
as current META_PERTRANS reservation type.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:29 +0000 (15:34 +0800)]
btrfs: qgroup: Split meta rsv type into meta_prealloc and meta_pertrans
Btrfs uses 2 different methods to reseve metadata qgroup space.
1) Reserve at btrfs_start_transaction() time
This is quite straightforward, caller will use the trans handler
allocated to modify b-trees.
In this case, reserved metadata should be kept until qgroup numbers
are updated.
2) Reserve by using block_rsv first, and later btrfs_join_transaction()
This is more complicated, caller will reserve space using block_rsv
first, and then later call btrfs_join_transaction() to get a trans
handle.
In this case, before we modify trees, the reserved space can be
modified on demand, and after btrfs_join_transaction(), such reserved
space should also be kept until qgroup numbers are updated.
Since these two types behave differently, split the original "META"
reservation type into 2 sub-types:
META_PERTRANS:
For above case 1)
META_PREALLOC:
For reservations that happened before btrfs_join_transaction() of
case 2)
NOTE: This patch will only convert existing qgroup meta reservation
callers according to its situation, not ensuring all callers are at
correct timing.
Such fix will be added in later patches.
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:28 +0000 (15:34 +0800)]
btrfs: qgroup: Cleanup the remaining old reservation counters
So qgroup is switched to new separate types reservation system.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:27 +0000 (15:34 +0800)]
btrfs: qgroup: Update trace events to use new separate rsv types
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:26 +0000 (15:34 +0800)]
btrfs: qgroup: Fix wrong qgroup reservation update for relationship modification
When modifying qgroup relationship, for qgroup which only owns exclusive
extents, we will go through quick update path.
In this path, we will add/subtract exclusive and reference number for
parent qgroup, since the source (child) qgroup only has exclusive
extents, destination (parent) qgroup will also own or lose those extents
exclusively.
The same should be the same for reservation, since later reservation
adding/releasing will also affect parent qgroup, without the reservation
carried from child, parent will underflow reservation or have dead
reservation which will never be freed.
However original code doesn't do the same thing for reservation.
It handles qgroup reservation quite differently:
It removes qgroup reservation, as it's allocating space from the
reserved qgroup for relationship adding.
But does nothing for qgroup reservation if we're removing a qgroup
relationship.
According to the original code, it looks just like because we're adding
qgroup->rfer, the code assumes we're writing new data, so it's follows
the normal write routine, by reducing qgroup->reserved and adding
qgroup->rfer/excl.
This old behavior is wrong, and should be fixed to follow the same
excl/rfer behavior.
Just fix it by using the correct behavior described above.
Fixes: 31193213f1f9 ("Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:25 +0000 (15:34 +0800)]
btrfs: qgroup: Make qgroup_reserve and its callers to use separate reservation type
Since most callers of qgroup_reserve() are already defined by type,
converting qgroup_reserve() is quite an easy work.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:24 +0000 (15:34 +0800)]
btrfs: qgroup: Introduce helpers to update and access new qgroup rsv
Introduce helpers to:
1) Get total reserved space
For limit calculation
2) Add/release reserved space for given type
With underflow detection and warning
3) Add/release reserved space according to child qgroup
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 12 Dec 2017 07:34:23 +0000 (15:34 +0800)]
btrfs: qgroup: Skeleton to support separate qgroup reservation type
Instead of single qgroup->reserved, use a new structure btrfs_qgroup_rsv
to store different types of reservation.
This patch only updates the header needed to compile.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Omar Sandoval [Thu, 25 Jan 2018 23:56:17 +0000 (15:56 -0800)]
Btrfs: delete dead code in btrfs_orphan_add()
btrfs_orphan_add() has had this case commented out since it was first
introduced in commit
d68fc57b7e32 ("Btrfs: Metadata reservation for
orphan inodes"). Most of the orphan cleanup code has been rewritten
since then, so it's safe to say that this code isn't needed.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ switch to bool ]
Signed-off-by: David Sterba <dsterba@suse.com>
Misono, Tomohiro [Tue, 20 Mar 2018 06:47:06 +0000 (15:47 +0900)]
btrfs: ctree.h: Fix wrong comment position about csum size
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney [Tue, 20 Mar 2018 19:25:26 +0000 (15:25 -0400)]
btrfs: defer adding raid type kobject until after chunk relocation
Any time the first block group of a new type is created, we add a new
kobject to sysfs to hold the attributes for that type. Kobject-internal
allocations always use GFP_KERNEL, making them prone to fs-reclaim races.
While it appears as if this can occur any time a block group is created,
the only times the first block group of a new type can be created in
memory is at mount and when we create the first new block group during
raid conversion.
This patch adds a new list to track pending kobject additions and then
handles them after we do chunk relocation. Between relocating the
target chunk (or forcing allocation of a new chunk in the case of data)
and removing the old chunk, we're in a safe place for fs-reclaim to
occur. We're holding the volume mutex, which is already held across
page faults, and the delete_unused_bgs_mutex, which will only stall
the cleaner thread.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney [Tue, 20 Mar 2018 19:25:25 +0000 (15:25 -0400)]
btrfs: remove dead create_space_info calls
Since commit
2be12ef79 (btrfs: Separate space_info create/update), we've
separated out the creation and updating of the space info structures.
That commit was a straightforward refactoring of the two parts of
update_space_info, but we can go a step further. Since commits
c59021f84 (Btrfs: fix OOPS of empty filesystem after balance) and
b742bb82f (Btrfs: Link block groups of different raid types), we know
that the space_info structures will be created at mount and there will
only ever be, at most, three of them.
This patch cleans out the create_space_info calls after __find_space_info
returns NULL since __find_space_info *can't* return NULL.
The initial cause for reviewing this was the kobject_add calls from
create_space_info occuring in sites where fs-reclaim wasn't allowed. Now
we are certain they occur only early in the mount process and are safe.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Thu, 22 Mar 2018 01:20:11 +0000 (09:20 +0800)]
Btrfs: replace: cache rbio when rebuild data on missing device
Rebuild on missing device is as same as recover, after it's done, rbio
has data which is consistent with on-disk data, so it can be cached to
avoid further reads.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jeff Mahoney [Fri, 16 Mar 2018 18:36:27 +0000 (14:36 -0400)]
btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers
While running btrfs/011, I hit the following lockdep splat.
This is the important bit:
pcpu_alloc+0x1ac/0x5e0
__percpu_counter_init+0x4e/0xb0
btrfs_init_fs_root+0x99/0x1c0 [btrfs]
btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
resolve_indirect_refs+0x130/0x830 [btrfs]
find_parent_nodes+0x69e/0xff0 [btrfs]
btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
btrfs_find_all_roots+0x50/0x70 [btrfs]
btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]
The percpu_counter_init call in btrfs_alloc_subvolume_writers
uses GFP_KERNEL, which we can't do during transaction commit.
This switches it to GFP_NOFS.
========================================================
WARNING: possible irq lock inversion dependency detected
4.12.14-kvmsmall #8 Tainted: G W
--------------------------------------------------------
kswapd0/50 just changed the state of lock:
(&delayed_node->mutex){+.+.-.}, at: [<
ffffffffc06994fa>] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
but this lock took another, RECLAIM_FS-unsafe lock in the past:
(pcpu_alloc_mutex){+.+.+.}
and interrupts could create inverse lock ordering between them.
other info that might help us debug this:
Chain exists of:
&delayed_node->mutex --> &found->groups_sem --> pcpu_alloc_mutex
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(pcpu_alloc_mutex);
local_irq_disable();
lock(&delayed_node->mutex);
lock(&found->groups_sem);
<Interrupt>
lock(&delayed_node->mutex);
*** DEADLOCK ***
2 locks held by kswapd0/50:
#0: (shrinker_rwsem){++++..}, at: [<
ffffffff811dc11f>] shrink_slab+0x7f/0x5b0
#1: (&type->s_umount_key#30){+++++.}, at: [<
ffffffff8126dec6>] trylock_super+0x16/0x50
the shortest dependencies between 2nd lock and 1st lock:
-> (pcpu_alloc_mutex){+.+.+.} ops: 4904 {
HARDIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
pcpu_alloc+0x1ac/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
__do_tune_cpucache+0x2c/0x220
do_tune_cpucache+0x26/0xc0
enable_cpucache+0x6d/0xf0
kmem_cache_init_late+0x42/0x75
start_kernel+0x343/0x4cb
x86_64_start_kernel+0x127/0x134
secondary_startup_64+0xa5/0xb0
SOFTIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
pcpu_alloc+0x1ac/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
__do_tune_cpucache+0x2c/0x220
do_tune_cpucache+0x26/0xc0
enable_cpucache+0x6d/0xf0
kmem_cache_init_late+0x42/0x75
start_kernel+0x343/0x4cb
x86_64_start_kernel+0x127/0x134
secondary_startup_64+0xa5/0xb0
RECLAIM_FS-ON-W at:
__kmalloc+0x47/0x310
pcpu_extend_area_map+0x2b/0xc0
pcpu_alloc+0x3ec/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
__do_tune_cpucache+0x2c/0x220
do_tune_cpucache+0x26/0xc0
enable_cpucache+0x6d/0xf0
__kmem_cache_create+0x1bf/0x390
create_cache+0xba/0x1b0
kmem_cache_create+0x1f8/0x2b0
ksm_init+0x6f/0x19d
do_one_initcall+0x50/0x1b0
kernel_init_freeable+0x201/0x289
kernel_init+0xa/0x100
ret_from_fork+0x3a/0x50
INITIAL USE at:
__mutex_lock+0x4e/0x8c0
pcpu_alloc+0x1ac/0x5e0
alloc_kmem_cache_cpus.isra.70+0x25/0xa0
setup_cpu_cache+0x2f/0x1f0
__kmem_cache_create+0x1bf/0x390
create_boot_cache+0x8b/0xb1
kmem_cache_init+0xa1/0x19e
start_kernel+0x270/0x4cb
x86_64_start_kernel+0x127/0x134
secondary_startup_64+0xa5/0xb0
}
... key at: [<
ffffffff821d8e70>] pcpu_alloc_mutex+0x70/0xa0
... acquired at:
pcpu_alloc+0x1ac/0x5e0
__percpu_counter_init+0x4e/0xb0
btrfs_init_fs_root+0x99/0x1c0 [btrfs]
btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
resolve_indirect_refs+0x130/0x830 [btrfs]
find_parent_nodes+0x69e/0xff0 [btrfs]
btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
btrfs_find_all_roots+0x50/0x70 [btrfs]
btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]
transaction_kthread+0x176/0x1b0 [btrfs]
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
-> (&fs_info->commit_root_sem){++++..} ops:
1566382 {
HARDIRQ-ON-W at:
down_write+0x3e/0xa0
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
cow_file_range.isra.66+0x133/0x470 [btrfs]
run_delalloc_range+0x121/0x410 [btrfs]
writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
__extent_writepage+0x19a/0x360 [btrfs]
extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
extent_writepages+0x4d/0x60 [btrfs]
do_writepages+0x1a/0x70
__filemap_fdatawrite_range+0xa7/0xe0
btrfs_rename+0x5ee/0xdb0 [btrfs]
vfs_rename+0x52a/0x7e0
SyS_rename+0x351/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
HARDIRQ-ON-R at:
down_read+0x35/0x90
caching_thread+0x57/0x560 [btrfs]
normal_work_helper+0x1c0/0x5e0 [btrfs]
process_one_work+0x1e0/0x5c0
worker_thread+0x44/0x390
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
SOFTIRQ-ON-W at:
down_write+0x3e/0xa0
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
cow_file_range.isra.66+0x133/0x470 [btrfs]
run_delalloc_range+0x121/0x410 [btrfs]
writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
__extent_writepage+0x19a/0x360 [btrfs]
extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
extent_writepages+0x4d/0x60 [btrfs]
do_writepages+0x1a/0x70
__filemap_fdatawrite_range+0xa7/0xe0
btrfs_rename+0x5ee/0xdb0 [btrfs]
vfs_rename+0x52a/0x7e0
SyS_rename+0x351/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-R at:
down_read+0x35/0x90
caching_thread+0x57/0x560 [btrfs]
normal_work_helper+0x1c0/0x5e0 [btrfs]
process_one_work+0x1e0/0x5c0
worker_thread+0x44/0x390
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
INITIAL USE at:
down_write+0x3e/0xa0
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
cow_file_range.isra.66+0x133/0x470 [btrfs]
run_delalloc_range+0x121/0x410 [btrfs]
writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
__extent_writepage+0x19a/0x360 [btrfs]
extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
extent_writepages+0x4d/0x60 [btrfs]
do_writepages+0x1a/0x70
__filemap_fdatawrite_range+0xa7/0xe0
btrfs_rename+0x5ee/0xdb0 [btrfs]
vfs_rename+0x52a/0x7e0
SyS_rename+0x351/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
}
... key at: [<
ffffffffc0729578>] __key.61970+0x0/0xfffffffffff9aa88 [btrfs]
... acquired at:
cache_block_group+0x287/0x420 [btrfs]
find_free_extent+0x106c/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
btrfs_create_tree+0xbb/0x2a0 [btrfs]
btrfs_create_uuid_tree+0x37/0x140 [btrfs]
open_ctree+0x23c0/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> (&found->groups_sem){++++..} ops:
2134587 {
HARDIRQ-ON-W at:
down_write+0x3e/0xa0
__link_block_group+0x34/0x130 [btrfs]
btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
open_ctree+0x2054/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
HARDIRQ-ON-R at:
down_read+0x35/0x90
btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
open_ctree+0x207b/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-W at:
down_write+0x3e/0xa0
__link_block_group+0x34/0x130 [btrfs]
btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
open_ctree+0x2054/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-R at:
down_read+0x35/0x90
btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
open_ctree+0x207b/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
INITIAL USE at:
down_write+0x3e/0xa0
__link_block_group+0x34/0x130 [btrfs]
btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
open_ctree+0x2054/0x2660 [btrfs]
btrfs_mount+0xd36/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
btrfs_mount+0x18c/0xf90 [btrfs]
mount_fs+0x3a/0x160
vfs_kern_mount+0x66/0x150
do_mount+0x1c1/0xcc0
SyS_mount+0x7e/0xd0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
}
... key at: [<
ffffffffc0729488>] __key.59101+0x0/0xfffffffffff9ab78 [btrfs]
... acquired at:
find_free_extent+0xcb4/0x12d0 [btrfs]
btrfs_reserve_extent+0xd8/0x170 [btrfs]
btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
__btrfs_cow_block+0x110/0x5b0 [btrfs]
btrfs_cow_block+0xd7/0x290 [btrfs]
btrfs_search_slot+0x1f6/0x960 [btrfs]
btrfs_lookup_inode+0x2a/0x90 [btrfs]
__btrfs_update_delayed_inode+0x65/0x210 [btrfs]
btrfs_commit_inode_delayed_inode+0x121/0x130 [btrfs]
btrfs_evict_inode+0x3fe/0x6a0 [btrfs]
evict+0xc4/0x190
__dentry_kill+0xbf/0x170
dput+0x2ae/0x2f0
SyS_rename+0x2a6/0x3b0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
-> (&delayed_node->mutex){+.+.-.} ops:
5580204 {
HARDIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
btrfs_update_inode+0x83/0x110 [btrfs]
btrfs_dirty_inode+0x62/0xe0 [btrfs]
touch_atime+0x8c/0xb0
do_generic_file_read+0x818/0xb10
__vfs_read+0xdc/0x150
vfs_read+0x8a/0x130
SyS_read+0x45/0xa0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
SOFTIRQ-ON-W at:
__mutex_lock+0x4e/0x8c0
btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
btrfs_update_inode+0x83/0x110 [btrfs]
btrfs_dirty_inode+0x62/0xe0 [btrfs]
touch_atime+0x8c/0xb0
do_generic_file_read+0x818/0xb10
__vfs_read+0xdc/0x150
vfs_read+0x8a/0x130
SyS_read+0x45/0xa0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
IN-RECLAIM_FS-W at:
__mutex_lock+0x4e/0x8c0
__btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
btrfs_evict_inode+0x22c/0x6a0 [btrfs]
evict+0xc4/0x190
dispose_list+0x35/0x50
prune_icache_sb+0x42/0x50
super_cache_scan+0x139/0x190
shrink_slab+0x262/0x5b0
shrink_node+0x2eb/0x2f0
kswapd+0x2eb/0x890
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
INITIAL USE at:
__mutex_lock+0x4e/0x8c0
btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
btrfs_update_inode+0x83/0x110 [btrfs]
btrfs_dirty_inode+0x62/0xe0 [btrfs]
touch_atime+0x8c/0xb0
do_generic_file_read+0x818/0xb10
__vfs_read+0xdc/0x150
vfs_read+0x8a/0x130
SyS_read+0x45/0xa0
do_syscall_64+0x79/0x1e0
entry_SYSCALL_64_after_hwframe+0x42/0xb7
}
... key at: [<
ffffffffc072d488>] __key.56935+0x0/0xfffffffffff96b78 [btrfs]
... acquired at:
__lock_acquire+0x264/0x11c0
lock_acquire+0xbd/0x1e0
__mutex_lock+0x4e/0x8c0
__btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
btrfs_evict_inode+0x22c/0x6a0 [btrfs]
evict+0xc4/0x190
dispose_list+0x35/0x50
prune_icache_sb+0x42/0x50
super_cache_scan+0x139/0x190
shrink_slab+0x262/0x5b0
shrink_node+0x2eb/0x2f0
kswapd+0x2eb/0x890
kthread+0x102/0x140
ret_from_fork+0x3a/0x50
stack backtrace:
CPU: 1 PID: 50 Comm: kswapd0 Tainted: G W 4.12.14-kvmsmall #8 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0x78/0xb7
print_irq_inversion_bug.part.38+0x19f/0x1aa
check_usage_forwards+0x102/0x120
? ret_from_fork+0x3a/0x50
? check_usage_backwards+0x110/0x110
mark_lock+0x16c/0x270
__lock_acquire+0x264/0x11c0
? pagevec_lookup_entries+0x1a/0x30
? truncate_inode_pages_range+0x2b3/0x7f0
lock_acquire+0xbd/0x1e0
? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
__mutex_lock+0x4e/0x8c0
? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
? btrfs_evict_inode+0x1f6/0x6a0 [btrfs]
__btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
btrfs_evict_inode+0x22c/0x6a0 [btrfs]
evict+0xc4/0x190
dispose_list+0x35/0x50
prune_icache_sb+0x42/0x50
super_cache_scan+0x139/0x190
shrink_slab+0x262/0x5b0
shrink_node+0x2eb/0x2f0
kswapd+0x2eb/0x890
kthread+0x102/0x140
? mem_cgroup_shrink_node+0x2c0/0x2c0
? kthread_create_on_node+0x40/0x40
ret_from_fork+0x3a/0x50
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 14 Mar 2018 08:29:13 +0000 (16:29 +0800)]
btrfs: drop optimal argument from find_live_mirror()
Drop optimal argument from the function find_live_mirror() as we can
deduce it in the function itself. Also rename optimal to
preferred_mirror.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 14 Mar 2018 08:29:12 +0000 (16:29 +0800)]
btrfs: drop num argument from find_live_mirror()
Obtain the stripes info from the map directly and so no need
to pass it as an argument.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 14:00:27 +0000 (16:00 +0200)]
btrfs: Drop fs_info parameter from __btrfs_run_delayed_refs
It's provided by transaction handle.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 14:00:26 +0000 (16:00 +0200)]
btrfs: Drop fs_info parameter from btrfs_finish_extent_commit
It's provided by the transaction handle.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 14:00:25 +0000 (16:00 +0200)]
btrfs: Drop fs_info parameter from btrfs_qgroup_account_extents
It's provided by the transaction handle.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 15:27:37 +0000 (17:27 +0200)]
btrfs: drop fs_info parameter from btrfs_run_delayed_refs
It's provided by the transaction handle.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 12:36:29 +0000 (14:36 +0200)]
btrfs: Remove unused flush var in shrink_delalloc
Added by
08e007d2e577 ("Btrfs: improve the noflush reservation") and
made redundant by
17024ad0a0fd ("Btrfs: fix early ENOSPC due to
delalloc").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 12:36:28 +0000 (14:36 +0200)]
btrfs: Remove unused extent_root var from caching_thread
Added by
b4570aa994b8 ("btrfs: fix compiling with CONFIG_BTRFS_DEBUG
enabled.") and obsoleted by
2ff7e61e0d30 ("btrfs: take an fs_info
directly when the root is not used otherwise").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 12:36:26 +0000 (14:36 +0200)]
btrfs: remove max_active var from open_ctree
Introduced by
5cdc7ad337fb ("btrfs: Replace fs_info->workers with
btrfs_workqueue.") but obsoleted by
2a4581983f90 ("btrfs: factor
btrfs_init_workqueues() out of open_ctree()").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 12:36:25 +0000 (14:36 +0200)]
btrfs: Remove unused root var from relink_file_extents
Added in
38c227d87c49 ("Btrfs: snapshot-aware defrag") but subsequently
made redundant by
0b246afa62b0 ("btrfs: root->fs_info cleanup, add
fs_info convenience variables").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 12:36:24 +0000 (14:36 +0200)]
btrfs: Remove unused tot_len var from lzo_decompress
Added already unused in
a6fa6fae40ec ("btrfs: Add lzo compression
support").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 12:36:23 +0000 (14:36 +0200)]
btrfs: Remove unused length var from scrub_handle_errored_block
Added in
b5d67f64f9bc ("Btrfs: change scrub to support big blocks") but
rendered redundant by
be50a8ddaae1 ("Btrfs: Simplify
scrub_setup_recheck_block()'s argument").
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 15 Mar 2018 12:36:22 +0000 (14:36 +0200)]
btrfs: Remove unused op_key var from add_delayed_refs
Added as part of
86d5f9944252 ("btrfs: convert prelimary reference
tracking to use rbtrees") but never used. tmp_op_key essentially
subsumed that variable.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 31 Jan 2018 05:56:15 +0000 (13:56 +0800)]
btrfs: volumes: Remove the meaningless condition of minimal nr_devs when allocating a chunk
When checking the minimal nr_devs, there is one dead and meaningless
condition:
if (ndevs < devs_increment * sub_stripes || ndevs < devs_min) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
This condition is meaningless, @devs_increment has nothing to do with
@sub_stripes.
In fact, in btrfs_raid_array[], profile with sub_stripes larger than 1
(RAID10) already has the @devs_increment set to 2.
So no need to multiple it by @sub_stripes.
And above condition is also dead.
For RAID10, @devs_increment * @sub_stripes equals 4, which is also the
@devs_min of RAID10.
For other profiles, @sub_stripes is always 1, and since @ndevs is
rounded down to @devs_increment, the condition will always be true.
Remove the meaningless condition to make later reader wander less.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 13 Mar 2018 10:22:32 +0000 (12:22 +0200)]
btrfs: Document parameters of btrfs_reserve_extent
This function is the entry to the extent allocator and as such has
quite a number of parameters. Some of those have subtle effects on the
allocation algorithm. Document the parameters.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 12 Mar 2018 12:48:09 +0000 (14:48 +0200)]
btrfs: Handle error from btrfs_uuid_tree_rem call in _btrfs_ioctl_set_received_subvol
As with every function which deals with modifying the btree
btrfs_uuid_tree_rem can fail for any number of reasons (ie. EIO/ENOMEM).
Handle return error value from this function gracefully by aborting the
transaction.
Fixes: dd5f9615fc5c ("Btrfs: maintain subvolume items in the UUID tree")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 13 Mar 2018 08:26:06 +0000 (10:26 +0200)]
btrfs: Use sizeof directly instead of a constant variable
The kernel would like to have all stack VLA usage removed[1].
Unfortunately using an integer constant variable as the size of an
array is still considered a VLA. Instead let's use directly sizeof(var)
which removes the VLA usage. Use the occasion to remove csum_size
altogether and use sizeof() also for the size passed to memcmp
[1]: https://lkml.org/lkml/2018/3/7/621
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 8 Mar 2018 13:35:48 +0000 (14:35 +0100)]
btrfs: rename submit callbacks and drop double underscores
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 8 Mar 2018 12:47:33 +0000 (13:47 +0100)]
btrfs: remove unused parameters from extent_submit_bio_done_t
Remove parameters not used by any of the callbacks.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 8 Mar 2018 12:47:33 +0000 (13:47 +0100)]
btrfs: remove unused parameters from extent_submit_bio_start_t
Remove parameters not used by any of the callbacks.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 23 Jun 2017 01:05:23 +0000 (03:05 +0200)]
btrfs: separate types for submit_bio_start and submit_bio_done
The callbacks make use of different parameters that are passed to the
other type unnecessarily. This patch adds separate types for each and
the unused parameters will be removed.
The type extent_submit_bio_hook_t keeps all parameters and can be used
where the start/done types are not appropriate.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 15:35:29 +0000 (16:35 +0100)]
btrfs: kill tree_mod_log_set_root_pointer helper
A useless wrapper around tree_mod_log_insert_root that hides missing
error handling. Move it to the callers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 15:16:54 +0000 (16:16 +0100)]
btrfs: kill tree_mod_log_set_node_key helper
A trivial wrapper that can be simply opencoded and makes the GFP
allocation request more visible. The error handling is now moved to the
callers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:47:39 +0000 (15:47 +0100)]
btrfs: kill trivial wrapper tree_mod_log_eb_move
The wrapper is effectively an alias for tree_mod_log_insert_move but
also hides the missing error handling. To make that more visible, lift
the BUG_ON to the callers.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:43:41 +0000 (15:43 +0100)]
btrfs: remove trivial locking wrappers of tree mod log
The wrappers are trivial and do not bring any extra value on top of the
plain locking primitives.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:33:18 +0000 (15:33 +0100)]
btrfs: drop fs_info parameter from __tree_mod_log_oldest_root
It's provided by the extent_buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:31:18 +0000 (15:31 +0100)]
btrfs: embed tree_mod_move structure to tree_mod_elem
The tree_mod_move is not used anywhere and can be embedded as anonymous
structure.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:26:29 +0000 (15:26 +0100)]
btrfs: drop unused fs_info parameter from tree_mod_log_eb_move
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:22:30 +0000 (15:22 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_free_eb
It's provided by the extent_buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:14:25 +0000 (15:14 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_free_eb
It's provided by the extent_buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:09:03 +0000 (15:09 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_insert_key
It's provided by the extent_buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:03:52 +0000 (15:03 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_insert_move
It's provided by the extent_buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 5 Mar 2018 14:00:37 +0000 (15:00 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_set_node_key
It's provided by the extent_buffer.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 12 Jun 2017 17:50:41 +0000 (19:50 +0200)]
btrfs: document more parameters of submit_extent_page
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Mon, 12 Jun 2017 18:00:43 +0000 (20:00 +0200)]
btrfs: cleanup merging conditions in submit_extent_page
The merge call was factored out to a separate helper but it's a trivial
one and arguably we can opencode it and cache the value.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 6 Jun 2017 17:50:13 +0000 (19:50 +0200)]
btrfs: remove redundant variable in __do_readpage
The value of page_end is only stored to end, no other use.
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 6 Jun 2017 17:22:55 +0000 (19:22 +0200)]
btrfs: assume that bio_ret is always valid in submit_extent_page
All callers pass a valid pointer so we can drop the redundant checks.
The call to submit_one_bio never happend and can be removed.
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Wed, 7 Mar 2018 19:08:09 +0000 (12:08 -0700)]
Btrfs: scrub: batch rebuild for raid56
In case of raid56, writes and rebuilds always take BTRFS_STRIPE_LEN(64K)
as unit, however, scrub_extent() sets blocksize as unit, so rebuild
process may be triggered on every block on a same stripe.
A typical example would be that when we're replacing a disappeared disk,
all reads on the disks get -EIO, every block (size is 4K if blocksize is
4K) would go thru these,
scrub_handle_errored_block
scrub_recheck_block # re-read pages one by one
scrub_recheck_block # rebuild by calling raid56_parity_recover()
page by page
Although with raid56 stripe cache most of reads during rebuild can be
avoided, the parity recover calculation(xor or raid6 algorithms) needs to
be done $(BTRFS_STRIPE_LEN / blocksize) times.
This makes it smarter by doing raid56 scrub/replace on stripe length.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Fri, 9 Mar 2018 13:37:01 +0000 (14:37 +0100)]
btrfs: sort and group mount option definitions
Sort mount options by the primary name, followed by the 'no-'
counterpart if it exists. Group the deprecated and debugging options.
Enum and token defintions are synced.
Signed-off-by: David Sterba <dsterba@suse.com>
Howard McLauchlan [Thu, 8 Mar 2018 18:48:48 +0000 (10:48 -0800)]
btrfs: Add nossd_spread mount option
Btrfs has two mount options for SSD optimizations: ssd and ssd_spread.
Presently there is an option to disable all SSD optimizations, but there
isn't an option to disable just ssd_spread.
This patch adds a mount option nossd_spread that disables ssd_spread
only.
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 5 Feb 2018 08:41:16 +0000 (10:41 +0200)]
btrfs: Remove btrfs_fs_info::open_ioctl_trans
Since userspace transaction have been removed we no longer have use
for this field so delete it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 5 Feb 2018 08:41:15 +0000 (10:41 +0200)]
btrfs: Remove code referencing unused TRANS_USERSPACE
Now that the userspace transaction ioctls have been removed,
TRANS_USERSPACE is no longer used hence we can remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 5 Feb 2018 08:41:14 +0000 (10:41 +0200)]
btrfs: Remove btrfs_file_private::trans
Now that the userspace transaction IOCTL have been removed, this member
is no longer used so just remove it
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 5 Feb 2018 08:41:13 +0000 (10:41 +0200)]
btrfs: Remove userspace transaction ioctls
Commit
3558d4f88ec8 ("btrfs: Deprecate userspace transaction ioctls")
marked the beginning of the end of userspace transaction. This commit
finishes the job! There are no known users and ceph does not use the
ioctl anymore.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Sage Weil <sage@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 19 Dec 2017 07:44:54 +0000 (15:44 +0800)]
btrfs: qgroup: Fix root item corruption when multiple same source snapshots are created with quota enabled
When multiple pending snapshots referring to the same source subvolume
are executed, enabled quota will cause root item corruption, where root
items are using old bytenr (no backref in extent tree).
This can be triggered by fstests btrfs/152.
The cause is when source subvolume is still dirty, extra commit
(simplied transaction commit) of qgroup_account_snapshot() can skip
dirty roots not recorded in current transaction, making root item of
source subvolume not updated.
Fix it by forcing recording source subvolume in current transaction
before qgroup sub-transaction commit.
Reported-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 14 Feb 2018 12:37:26 +0000 (14:37 +0200)]
btrfs: Relax memory barrier in btrfs_tree_unlock
When performing an unlock on an extent buffer we'd like to order the
decrement of extent_buffer::blocking_writers with waking up any
waiters. In such situations it's sufficient to use smp_mb__after_atomic
rather than the heavy smp_mb. On architectures where atomic operations
are fully ordered (such as x86 or s390) unconditionally executing
a heavyweight smp_mb instruction causes a severe hit to performance
while bringin no improvements in terms of correctness.
The better thing is to use the appropriate smp_mb__after_atomic routine
which will do the correct thing (invoke a full smp_mb or in the case
of ordered atomics insert a compiler barrier). Put another way,
an RMW atomic op + smp_load__after_atomic equals, in terms of
semantics, to a full smp_mb. This ensures that none of the problems
described in the accompanying comment of waitqueue_active occur.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 7 Mar 2018 09:29:18 +0000 (17:29 +0800)]
btrfs: add define for oldest generation
Some functions can filter metadata by the generation. Add a define that
will annotate such arguments.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 7 Mar 2018 14:33:22 +0000 (15:33 +0100)]
btrfs: open code trivial helper btrfs_page_exists_in_range
The called function name is self explanatory.
Signed-off-by: David Sterba <dsterba@suse.com>
Matthew Wilcox [Tue, 6 Mar 2018 19:23:16 +0000 (11:23 -0800)]
btrfs: Use filemap_range_has_page()
The current implementation of btrfs_page_exists_in_range() gives the
wrong answer if the workingset code has stored a shadow entry in the
page cache. The filemap_range_has_page() function does not have this
problem, and it's shared code, so use it instead.
eigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Fri, 2 Mar 2018 23:10:41 +0000 (16:10 -0700)]
Btrfs: dev-replace: make sure target is identical to source when raid56 rebuild fails
In the last step of scrub_handle_error_block, we try to combine good
copies on all possible mirrors, this works fine for raid1 and raid10,
but not for raid56 as it's doing parity rebuild.
If parity rebuild doesn't get back with correct data which matches its
checksum, in case of replace we'd rather write what is stored in the
source device than the data calculuated from parity.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Fri, 2 Mar 2018 23:10:39 +0000 (16:10 -0700)]
Btrfs: raid56: remove redundant async_missing_raid56
async_missing_raid56() is identical to async_read_rebuild().
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Su Yue [Mon, 5 Mar 2018 09:13:37 +0000 (17:13 +0800)]
btrfs: adjust return values of btrfs_inode_by_name
Previously, btrfs_inode_by_name() returned 0 which left caller to check
objectid of location even location if the type was invalid.
Let btrfs_inode_by_name() return -EUCLEAN if a corrupted location of a
dir entry is found. Removal of label out_err also simplifies the
function.
Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ drop unlikely ]
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Tue, 27 Feb 2018 04:41:59 +0000 (12:41 +0800)]
btrfs: rename btrfs_close_extra_device to btrfs_free_extra_devids
This function btrfs_close_extra_devices() is about freeing
extra devids which once it may have belonged to this filesystem.
So rename it and add the comment. The _devid suffix is
appropriate as this function won't handle devices which are
outside of the filesytem being mounted.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Fri, 2 Mar 2018 07:43:15 +0000 (09:43 +0200)]
btrfs: Remove root argument from cow_file_range_inline
This argument is always set to the root of the inode, which is also
passed. So let's get a reference inside the function and simplify
the arg list.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Liu Bo [Sat, 3 Mar 2018 01:05:49 +0000 (18:05 -0700)]
Btrfs: send: fix typo in TLV_PUT
According to tlv_put()'s prototype, data and attrlen needs to be
exchanged in the macro, but seems all callers are already aware of
this misorder and are therefore not affected.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 27 Feb 2018 15:37:18 +0000 (17:37 +0200)]
btrfs: Remove root argument from btrfs_log_dentry_safe
Now that nothing uses the root arg of btrfs_log_dentry_safe it can be
safely removed. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 27 Feb 2018 15:37:17 +0000 (17:37 +0200)]
btrfs: Remove root arg from btrfs_log_inode_parent
btrfs_log_inode_parent is called from 2 places (btrfs_log_dentry_safe
and btrfs_log_new_name) both of which pass inode->root as the root
argument and the inode itself. Remove the redundant root argument and
get a reference to the root directly from the inode, also remove
redundant root != inode->root check from the same function. No
functional change.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
git.samba.org / sfrench / cifs-2.6.git / log