perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register

The Intel SDM states that bit 13 of Icelake's MSR_OFFCORE_RSP_x
register is valid, and used for counting hardware generated prefetches
of L3 cache. Update the bitmask to allow bit 13.

Before:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
 Performance counter stats for 'sleep 3':
   <not supported>      cpu/event=0xb7,umask=0x1,config1=0x1bfff/u

After:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
 Performance counter stats for 'sleep 3':
             9,293      cpu/event=0xb7,umask=0x1,config1=0x1bfff/u

Signed-off-by: Yunying Sun <yunying.sun@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: https://lkml.kernel.org/r/20190724082932.12833-1-yunying.sun@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Fix SLOTS PEBS event constraint

Sampling SLOTS event and ref-cycles event in a group on Icelake gives
EINVAL.

SLOTS event is the event stands for the fixed counter 3, not fixed
counter 2. Wrong mask was set to SLOTS event in
intel_icl_pebs_event_constraints[].

Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6017608936c1 ("perf/x86/intel: Add Icelake support")
Link: https://lkml.kernel.org/r/20190723200429.8180-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

locking/mutex: Test for initialized mutex

An uninitialized/ zeroed mutex will go unnoticed because there is no
check for it. There is a magic check in the unlock's slowpath path which
might go unnoticed if the unlock happens in the fastpath.

Add a ->magic check early in the mutex_lock() and mutex_trylock() path.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190703092125.lsdf4gpsh2plhavb@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

locking/lockdep: Clean up #ifdef checks

As Will Deacon points out, CONFIG_PROVE_LOCKING implies TRACE_IRQFLAGS,
so the conditions I added in the previous patch, and some others in the
same file can be simplified by only checking for the former.

No functional change.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Yuyang Du <duyuyang@gmail.com>
Fixes: 886532aee3cd ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING")
Link: https://lkml.kernel.org/r/20190628102919.2345242-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

locking/lockdep: Hide unused 'class' variable

The usage is now hidden in an #ifdef, so we need to move
the variable itself in there as well to avoid this warning:

  kernel/locking/lockdep_proc.c:203:21: error: unused variable 'class' [-Werror,-Wunused-variable]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yuyang Du <duyuyang@gmail.com>
Cc: frederic@kernel.org
Fixes: 68d41d8c94a3 ("locking/lockdep: Fix lock used or unused stats error")
Link: https://lkml.kernel.org/r/20190715092809.736834-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>

locking/rwsem: Add ACQUIRE comments

Since we just reviewed read_slowpath for ACQUIRE correctness, add a
few coments to retain our findings.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop

While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of
a bug we just found for rwsem.

  X = 0;

  CPU0 CPU1

  rwsem_down_read()
    for (;;) {
      set_current_state(TASK_UNINTERRUPTIBLE);

                        X = 1;
                        rwsem_up_write();
                          rwsem_mark_wake()
                            atomic_long_add(adjustment, &sem->count);
                            smp_store_release(&waiter->task, NULL);

      if (!waiter.task)
        break;

      ...
    }

  r = X;

Allows 'r == 0'.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4898e640caf0 ("tty: Add timed, writer-prioritized rw semaphore")
Signed-off-by: Ingo Molnar <mingo@kernel.org>

lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop

While reviewing another read_slowpath patch, both Will and I noticed
another missing ACQUIRE, namely:

  X = 0;

  CPU0 CPU1

  rwsem_down_read()
    for (;;) {
      set_current_state(TASK_UNINTERRUPTIBLE);

                        X = 1;
                        rwsem_up_write();
                          rwsem_mark_wake()
                            atomic_long_add(adjustment, &sem->count);
                            smp_store_release(&waiter->task, NULL);

      if (!waiter.task)
        break;

      ...
    }

  r = X;

Allows 'r == 0'.

Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Ingo Molnar <mingo@kernel.org>

locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty

LTP mtest06 has been observed to occasionally hit "still mapped when
deleted" and following BUG_ON on arm64.

The extra mapcount originated from pagefault handler, which handled
pagefault for vma that has already been detached. vma is detached
under mmap_sem write lock by detach_vmas_to_be_unmapped(), which
also invalidates vmacache.

When the pagefault handler (under mmap_sem read lock) calls
find_vma(), vmacache_valid() wrongly reports vmacache as valid.

After rwsem down_read() returns via 'queue empty' path (as of v5.2),
it does so without an ACQUIRE on sem->count:

  down_read()
    __down_read()
      rwsem_down_read_failed()
        __rwsem_down_read_failed_common()
          raw_spin_lock_irq(&sem->wait_lock);
          if (list_empty(&sem->wait_list)) {
            if (atomic_long_read(&sem->count) >= 0) {
              raw_spin_unlock_irq(&sem->wait_lock);
              return sem;

The problem can be reproduced by running LTP mtest06 in a loop and
building the kernel (-j $NCPUS) in parallel. It does reproduces since
v4.20 on arm64 HPE Apollo 70 (224 CPUs, 256GB RAM, 2 nodes). It
triggers reliably in about an hour.

The patched kernel ran fine for 10+ hours.

Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dbueso@suse.de
Fixes: 4b486b535c33 ("locking/rwsem: Exit read lock slowpath if queue empty & no writer")
Link: https://lkml.kernel.org/r/50b8914e20d1d62bb2dee42d342836c2c16ebee7.1563438048.git.jstancek@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

locking/rwsem: Don't call owner_on_cpu() on read-owner

For writer, the owner value is cleared on unlock. For reader, it is
left intact on unlock for providing better debugging aid on crash dump
and the unlock of one reader may not mean the lock is free.

As a result, the owner_on_cpu() shouldn't be used on read-owner
as the task pointer value may not be valid and it might have
been freed. That is the case in rwsem_spin_on_owner(), but not in
rwsem_can_spin_on_owner(). This can lead to use-after-free error from
KASAN. For example,

  BUG: KASAN: use-after-free in rwsem_down_write_slowpath
  (/home/miguel/kernel/linux/kernel/locking/rwsem.c:669
  /home/miguel/kernel/linux/kernel/locking/rwsem.c:1125)

Fix this by checking for RWSEM_READER_OWNED flag before calling
owner_on_cpu().

Reported-by: Luis Henriques <lhenriques@suse.com>
Tested-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Fixes: 94a9717b3c40e ("locking/rwsem: Make rwsem->owner an atomic_long_t")
Link: https://lkml.kernel.org/r/81e82d5b-5074-77e8-7204-28479bbe0df0@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/fair: Use RCU accessors consistently for ->numa_group

The old code used RCU annotations and accessors inconsistently for
->numa_group, which can lead to use-after-frees and NULL dereferences.

Let all accesses to ->numa_group use proper RCU helpers to prevent such
issues.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 8c8a743c5087 ("sched/numa: Use {cpu, pid} to create task groups for shared faults")
Link: https://lkml.kernel.org/r/20190716152047.14424-3-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

sched/fair: Don't free p->numa_faults with concurrent readers

When going through execve(), zero out the NUMA fault statistics instead of
freeing them.

During execve, the task is reachable through procfs and the scheduler. A
concurrent /proc/*/sched reader can read data from a freed ->numa_faults
allocation (confirmed by KASAN) and write it back to userspace.
I believe that it would also be possible for a use-after-free read to occur
through a race between a NUMA fault and execve(): task_numa_fault() can
lead to task_numa_compare(), which invokes task_weight() on the currently
running task of a different CPU.

Another way to fix this would be to make ->numa_faults RCU-managed or add
extra locking, but it seems easier to wipe the NUMA fault statistics on
execve.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()")
Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

test_firmware: fix a memory leak bug

In test_firmware_init(), the buffer pointed to by the global pointer
'test_fw_config' is allocated through kzalloc(). Then, the buffer is
initialized in __test_firmware_config_init(). In the case that the
initialization fails, the following execution in test_firmware_init() needs
to be terminated with an error code returned to indicate this failure.
However, the allocated buffer is not freed on this execution path, leading
to a memory leak bug.

To fix the above issue, free the allocated buffer before returning from
test_firmware_init().

Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Link: https://lore.kernel.org/r/1563084696-6865-1-git-send-email-wang6495@umn.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hpet: Fix division by zero in hpet_time_div()

The base value in do_div() called by hpet_time_div() is truncated from
unsigned long to uint32_t, resulting in a divide-by-zero exception.

UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2
division by zero
CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561
 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20
 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0
Call Trace:
 [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline]
 [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51
 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166
 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262
 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline]
 [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline]
 [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577
 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676
 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline]
 [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline]
 [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605
 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline]
 [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613
 [<ffffffff82846003>] tracesys_phase2+0x90/0x95

The main C reproducer autogenerated by syzkaller,

  syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
  memcpy((void*)0x20000100, "/dev/hpet\000", 10);
  syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0);
  syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000);

Fix it by using div64_ul().

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhang HongJun <zhanghongjun2@huawei.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190711132757.130092-1-wangkefeng.wang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eeprom: make older eeprom drivers select NVMEM_SYSFS

misc/eeprom/{at24,at25,eeprom_93xx46} drivers all register their
corresponding devices in the nvmem framework in compat mode which requires
nvmem sysfs interface to be present. The latter, however, has been split
out from nvmem under a separate Kconfig in commit ae0c2d725512 ("nvmem:
core: add NVMEM_SYSFS Kconfig"). As a result, probing certain I2C-attached
EEPROMs now fails with

  at24: probe of 0-0050 failed with error -38

because of a stub implementation of nvmem_sysfs_setup_compat()
in drivers/nvmem/nvmem.h. Update the nvmem dependency for these drivers
so they could load again:

  at24 0-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write

Cc: Adrian Bunk <bunk@kernel.org>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Arseny Solokha <asolokha@kb.kras.ru>
Link: https://lore.kernel.org/r/20190716111236.27803-1-asolokha@kb.kras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vt: Grab console_lock around con_is_bound in show_bind

Not really harmful not to, but also not harm in grabbing the lock. And
this shuts up a new WARNING I introduced in commit ddde3c18b700 ("vt:
More locking checks").

Reported-by: Jens Remus <jremus@linux.ibm.com>
Cc: linux-kernel@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Martin Hostettler <textshell@uchuujin.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Fixes: ddde3c18b700 ("vt: More locking checks")
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Tested-by: Jens Remus <jremus@linux.ibm.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://lore.kernel.org/r/20190718080903.22622-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vmw_balloon: Remove Julien from the maintainers list

Julien will not be a maintainer anymore.

Signed-off-by: Nadav Amit <namit@vmware.com>
Link: https://lore.kernel.org/r/20190702100519.7464-1-namit@vmware.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/mds: Apply more accurate check on hypervisor platform

X86_HYPER_NATIVE isn't accurate for checking if running on native platform,
e.g. CONFIG_HYPERVISOR_GUEST isn't set or "nopv" is enabled.

Checking the CPU feature bit X86_FEATURE_HYPERVISOR to determine if it's
running on native platform is more accurate.

This still doesn't cover the platforms on which X86_FEATURE_HYPERVISOR is
unsupported, e.g. VMware, but there is nothing which can be done about this
scenario.

Fixes: 8a4b06d391b0 ("x86/speculation/mds: Add sysfs reporting for MDS")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1564022349-17338-1-git-send-email-zhenzhong.duan@oracle.com

x86/hpet: Undo the early counter is counting check

Rui reported that on a Pentium D machine which has HPET forced enabled
because it is not advertised by ACPI, the early counter is counting check
leads to a silent boot hang.

The reason is that the ordering of checking the counter first and then
reconfiguring the HPET fails to work on that machine. As the HPET is not
advertised and presumably not initialized by the BIOS the early enable and
the following reconfiguration seems to bring it into a broken state. Adding
clocksource=jiffies to the command line results in the following
clocksource watchdog warning:

  clocksource: timekeeping watchdog on CPU1:
  Marking clocksource 'tsc-early' as unstable because the skew is too large:
  clocksource:  'hpet' wd_now: 33 wd_last: 33 mask: ffffffff

That clearly shows that the HPET is not counting after it got reconfigured
and reenabled. If the counter is not working then the HPET timer is not
expiring either, which explains the boot hang.

Move the counter is counting check after the full configuration again to
unbreak these systems.

Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: 3222daf970f3 ("x86/hpet: Separate counter check out of clocksource register code")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907250810530.1791@nanos.tec.linutronix.de

tty: serial: netx: Delete driver

The Netx ARM machine was deleted from the kernel. This driver
had no users and has to go.

Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).

A second regression was found in the immediate data transfer (IDT)
support which was added to 5.2 kernel

IDT is used to transfer small amounts of data (up to 8 bytes) in the
field normally used for data dma address, thus avoiding dma mapping.

If the data was not already dma mapped, then IDT support assumed data was
in urb->transfer_buffer, and did not take into accound that even
small amounts of data (8 bytes) can be in a scatterlist instead.

This caused a NULL pointer dereference when sg_dma_len() was used
with non-dma mapped data.

Solve this by not using IDT if scatter gather buffer list is used.

Fixes: 33e39350ebd2 ("usb: xhci: add Immediate Data Transfer support")
Cc: <stable@vger.kernel.org> # v5.2
Reported-by: Maik Stohn <maik.stohn@seal-one.com>
Tested-by: Maik Stohn <maik.stohn@seal-one.com>
CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1564044861-1445-1-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port

This is a partial revert of 73d31def1aab "usb: usb251xb: Create a ports
field collector method", which broke a existing devicetree
(arch/arm64/boot/dts/freescale/imx8mq.dtsi).

There is no reason why the swap-dx-lanes property should not apply to
the upstream port. The reason given in the breaking commit was that it's
inconsitent with respect to other port properties, but in fact it is not.
All other properties which only apply to the downstream ports explicitly
reject port 0, so there is pretty strong precedence that the driver
referred to the upstream port as port 0. So there is no inconsistency in
this property at all, other than the swapping being also applicable to
the upstream port.

CC: stable@vger.kernel.org #5.2
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20190719084407.28041-3-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: usb251xb: Add US port lanes inversion property"

This property isn't needed and not yet used anywhere. The swap-dx-lanes
property is perfectly fine for doing the swap on the upstream port
lanes.

CC: stable@vger.kernel.org #5.2
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20190719084407.28041-2-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "usb: usb251xb: Add US lanes inversion dts-bindings"

This reverts commit 3342ce35a1, as there is no need for this separate
property and it breaks compatibility with existing devicetree files
(arch/arm64/boot/dts/freescale/imx8mq.dtsi).

CC: stable@vger.kernel.org #5.2
Fixes: 3342ce35a183 ("usb: usb251xb: Add US lanes inversion dts-bindings")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20190719084407.28041-1-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iomap: fix Invalid License ID

Detected by:

  $ ./scripts/spdxcheck.py
  fs/iomap/Makefile: 1:27 Invalid License ID: GPL-2.0-or-newer

Fixes: 1c230208f53d ("iomap: start moving code to fs/iomap/")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again

The "WITH Linux-syscall-note" exception exists for headers exported to
user space. It is strange to add it to non-exported headers.

Commit 687a3e4d8e61 ("treewide: remove SPDX "WITH Linux-syscall-note"
from kernel-space headers") did cleanups some months ago, but it looks
like we need to do this periodically.

This patch was generated by the following script:

  git grep -l -e Linux-syscall-note \
    -- :*.h :^arch/*/include/uapi/asm/*.h :^include/uapi/ :^tools |
  while read file
  do
          sed -i -e 's/(\(GPL-[^[:space:]]*\) WITH Linux-syscall-note)/\1/g' \
          -e 's/ WITH Linux-syscall-note//g' $file
  done

I did not commit drivers/staging/android/uapi/ion.h . This header is
not currently exported, but somebody may plan to move it to include/uapi/
when the time comes. I am not sure. Anyway, it will be better to check
the license inconsistency in drivers/staging/android/uapi/.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers

UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.

The exception note is missing in some UAPI headers.

Some of them slipped in by the treewide conversion commit b24413180f56
("License cleanup: add SPDX GPL-2.0 license identifier to files with
no license"). Just run:

  $ git show --oneline b24413180f56 -- arch/x86/include/uapi/asm/

I believe they are not intentional, and should be fixed too.

This patch was generated by the following script:

  git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
    -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild |
  while read file
  do
          sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
          -e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
          -e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file
  done

After this patch is applied, there are 5 UAPI headers that do not contain
"WITH Linux-syscall-note". They are kept untouched since this exception
applies only to GPL variants.

  $ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
    -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild
  include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */
  include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'pm-cpufreq'

* pm-cpufreq:
  cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()

usb: wusbcore: fix unbalanced get/put cluster_id

syzboot reported that
https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef

There is not consitency parameter in cluste_id_get/put calling.
In case of getting the id with result is failure, the wusbhc->cluster_id
will not be updated and this can not be used for wusb_cluster_id_put().

Tested report
https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ

Reproduce and gdb got the details:

139 addr = wusb_cluster_id_get();
(gdb) n
140 if (addr == 0)
(gdb) print addr
$1 = 254 '\376'
(gdb) n
142 result = __hwahc_set_cluster_id(hwahc, addr);
(gdb) print result
$2 = -71
(gdb) break wusb_cluster_id_put
Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384.
(gdb) s
Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384
384 id = 0xff - id;
(gdb) n
385 BUG_ON(id >= CLUSTER_IDS);
(gdb) print id
$3 = 255 '\377'

Reported-by: syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190724020601.15257-1-tranmanphong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem()

The devm_memremap() function doesn't return NULL, it returns error
pointers.

Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20190607135709.GC16718@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-storage: Add a limitation for blk_queue_max_hw_sectors()

This patch fixes an issue that the following error happens on
swiotlb environment:

xhci-hcd ee000000.usb: swiotlb buffer is full (sz: 524288 bytes), total 32768 (slots), used 1338 (slots)

On the kernel v5.1, block settings of a usb-storage with SuperSpeed
were the following so that the block layer will allocate buffers
up to 64 KiB, and then the issue didn't happen.

max_segment_size = 65536
max_hw_sectors_kb = 1024

After the commit 09324d32d2a0 ("block: force an unlimited segment
size on queues with a virt boundary") is applied, the block settings
are the following. So, the block layer will allocate buffers up to
1024 KiB, and then the issue happens:

max_segment_size = 4294967295
max_hw_sectors_kb = 1024

To fix the issue, the usb-storage driver checks the maximum size of
a mapping for the device and then adjusts the max_hw_sectors_kb
if required. After this patch is applied, the block settings will
be the following, and then the issue doesn't happen.

max_segment_size = 4294967295
max_hw_sectors_kb = 256

Fixes: 09324d32d2a0 ("block: force an unlimited segment size on queues with a virt boundary")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/1563793105-20597-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: pci-quirks: Minor cleanup for AMD PLL quirk

usb_amd_find_chipset_info() is used for chipset detection for
several quirks. It is strange that its return value indicates
the need for the PLL quirk, which means it is often ignored.
This patch adds a function specifically for checking the PLL
quirk like the other ones. Additionally, rename probe_result to
something more appropriate.

Signed-off-by: Ryan Kennedy <ryan5544@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20190704153529.9429-3-ryan5544@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: pci-quirks: Correct AMD PLL quirk detection

The AMD PLL USB quirk is incorrectly enabled on newer Ryzen
chipsets. The logic in usb_amd_find_chipset_info currently checks
for unaffected chipsets rather than affected ones. This broke
once a new chipset was added in e788787ef. It makes more sense
to reverse the logic so it won't need to be updated as new
chipsets are added. Note that the core of the workaround in
usb_amd_quirk_pll does correctly check the chipset.

Signed-off-by: Ryan Kennedy <ryan5544@gmail.com>
Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add a conexant codec entry to let mute led work

This conexant codec isn't in the supported codec list yet, the hda
generic driver can drive this codec well, but on a Lenovo machine
with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI
to make the leds work. After adding this codec to the list, the
driver patch_conexant.c will apply THINKPAD_ACPI to this machine.

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

objtool: Improve UACCESS coverage

A clang build reported an (obvious) double CLAC while a GCC build did not;
it turns out that objtool only re-visits instructions if the first visit
was with AC=0. If OTOH the first visit was with AC=1, it completely ignores
any subsequent visit, even when it has AC=0.

Fix this by using a visited mask instead of a boolean, and (explicitly)
mark the AC state.

$ ./objtool check -b --no-fp --retpoline --uaccess drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool: .altinstr_replacement+0x22: redundant UACCESS disable
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool:   eb_copy_relocations.isra.34()+0xea: (alt)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool:   .altinstr_replacement+0xffffffffffffffff: (branch)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool:   eb_copy_relocations.isra.34()+0xd9: (alt)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool:   eb_copy_relocations.isra.34()+0xb2: (branch)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool:   eb_copy_relocations.isra.34()+0x39: (branch)
drivers/gpu/drm/i915/gem/i915_gem_execbuffer.o: warning: objtool:   eb_copy_relocations.isra.34()+0x0: <=== (func)

Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/617
Link: https://lkml.kernel.org/r/5359166aad2d53f3145cd442d83d0e5115e0cd17.1564007838.git.jpoimboe@redhat.com

ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips

It turned out that the recent Intel HD-audio controller chips show a
significant stall during the system PM resume intermittently.  It
doesn't happen so often and usually it may read back successfully
after one or more seconds, but in some rare worst cases the driver
went into fallback mode.

After trial-and-error, we found out that the communication stall seems
covered by issuing the sync after each verb write, as already done for
AMD and other chipsets.  So this patch enables the write-sync flag for
the recent Intel chips, Skylake and onward, as a workaround.

Also, since Broxton and co have the very same driver flags as Skylake,
refer to the Skylake driver flags instead of defining the same
contents again for simplification.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201901
Reported-and-tested-by: Todd Brandt <todd.e.brandt@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fix uninitialized variable in ipmb_dev_int.c

ret at line 112 of ipmb_dev_int.c is uninitialized which
results in a warning during build regressions.
This warning was found by build regression/improvement
testing for v5.3-rc1.

Reported-by: build regression/improvement testing for v5.3-rc1.
Fixes: 51bd6f291583 ("Add support for IPMB driver")
Signed-off-by: Asmaa Mnebhi <Asmaa@mellanox.com>
Message-Id: <571dbb67cf58411d567953d9fb3739eb4789238b.1563996586.git.Asmaa@mellanox.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>

dt-bindings: interrupt-controller: al-fic: remove redundant binding

Remove dt binding description for standard binding.

Signed-off-by: Talel Shenhar <talel@amazon.com>
Signed-off-by: Rob Herring <robh@kernel.org>

selftests/livepatch: add test skip handling

Add a skip() message function that stops the test, logs an explanation,
and sets the "skip" return code (4).

Before loading a livepatch self-test kernel module, first verify that
we've built and installed it by running a 'modprobe --dry-run'.  This
should catch a few environment issues, including !CONFIG_LIVEPATCH and
!CONFIG_TEST_LIVEPATCH.  In these cases, exit gracefully with the new
skip() function.

Reported-by: Jiri Benc <jbenc@redhat.com>
Suggested-by: Shuah Khan <shuah@kernel.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

IB/mlx5: Fix clean_mr() to work in the expected order

Any dma map underlying the MR should only be freed once the MR is fenced
at the hardware.

As of the above we first destroy the MKEY and just after that can safely
call to dma_unmap_single().

Link: https://lore.kernel.org/r/20190723065733.4899-6-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.3
Fixes: 8a187ee52b04 ("IB/mlx5: Support the new memory registration API")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache

Fix unreg_umr to move the MR to a kernel owned PD (i.e. the UMR PD) which
can't be accessed by userspace.

This ensures that nothing can continue to access the MR once it has been
placed in the kernels cache for reuse.

MRs in the cache continue to have their HW state, including DMA tables,
present. Even though the MR has been invalidated, changing the PD provides
an additional layer of protection against use of the MR.

Link: https://lore.kernel.org/r/20190723065733.4899-5-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.10
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Use direct mkey destroy command upon UMR unreg failure

Use a direct firmware command to destroy the mkey in case the unreg UMR
operation has failed.

This prevents a case that a mkey will leak out from the cache post a
failure to be destroyed by a UMR WR.

In case the MR cache limit didn't reach a call to add another entry to the
cache instead of the destroyed one is issued.

In addition, replaced a warn message to WARN_ON() as this flow is fatal
and can't happen unless some bug around.

Link: https://lore.kernel.org/r/20190723065733.4899-4-leon@kernel.org
Cc: <stable@vger.kernel.org> # 4.10
Fixes: 49780d42dfc9 ("IB/mlx5: Expose MR cache for mlx5_ib")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Fix unreg_umr to ignore the mkey state

Fix unreg_umr to ignore the mkey state and do not fail if was freed.  This
prevents a case that a user space application already changed the mkey
state to free and then the UMR operation will fail leaving the mkey in an
inappropriate state.

Link: https://lore.kernel.org/r/20190723065733.4899-3-leon@kernel.org
Cc: <stable@vger.kernel.org> # 3.19
Fixes: 968e78dd9644 ("IB/mlx5: Enhance UMR support to allow partial page table update")
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

ktest: Fix some typos in config-bisect.pl

This patch fixes some spelling typos in config-bisect.pl

Link: http://lkml.kernel.org/r/20190723032445.14220-1-standby24x7@gmail.com
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

selftests: mlxsw: Fix typo in qos_mc_aware.sh

This patch fixes some spelling typo in qos_mc_aware.sh

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

access: avoid the RCU grace period for the temporary subjective credentials

It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU
work because it installs a temporary credential that gets allocated and
freed for each system call.

The allocation and freeing overhead is mostly benign, but because
credentials can be accessed under the RCU read lock, the freeing
involves a RCU grace period.

Which is not a huge deal normally, but if you have a lot of access()
calls, this causes a fair amount of seconday damage: instead of having a
nice alloc/free patterns that hits in hot per-CPU slab caches, you have
all those delayed free's, and on big machines with hundreds of cores,
the RCU overhead can end up being enormous.

But it turns out that all of this is entirely unnecessary.  Exactly
because access() only installs the credential as the thread-local
subjective credential, the temporary cred pointer doesn't actually need
to be RCU free'd at all.  Once we're done using it, we can just free it
synchronously and avoid all the RCU overhead.

So add a 'non_rcu' flag to 'struct cred', which can be set by users that
know they only use it in non-RCU context (there are other potential
users for this).  We can make it a union with the rcu freeing list head
that we need for the RCU case, so this doesn't need any extra storage.

Note that this also makes 'get_current_cred()' clear the new non_rcu
flag, in case we have filesystems that take a long-term reference to the
cred and then expect the RCU delayed freeing afterwards.  It's not
entirely clear that this is required, but it makes for clear semantics:
the subjective cred remains non-RCU as long as you only access it
synchronously using the thread-local accessors, but you _can_ use it as
a generic cred if you want to.

It is possible that we should just remove the whole RCU markings for
->cred entirely.  Only ->real_cred is really supposed to be accessed
through RCU, and the long-term cred copies that nfs uses might want to
explicitly re-enable RCU freeing if required, rather than have
get_current_cred() do it implicitly.

But this is a "minimal semantic changes" change for the immediate
problem.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jan Glauber <jglauber@marvell.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'powerpc-5.3-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "An assortment of non-regression fixes that have accumulated since the
  start of the merge window.

   - A fix for a user triggerable oops on machines where transactional
     memory is disabled, eg. Power9 bare metal, Power8 with TM disabled
     on the command line, or all Power7 or earlier machines.

   - Three fixes for handling of PMU and power saving registers when
     running nested KVM on Power9.

   - Two fixes for bugs found while stress testing the XIVE interrupt
     controller code, also on Power9.

   - A fix to allow guests to boot under Qemu/KVM on Power9 using the
     the Hash MMU with >= 1TB of memory.

   - Two fixes for bugs in the recent DMA cleanup, one of which could
     lead to checkstops.

   - And finally three fixes for the PAPR SCM nvdimm driver.

  Thanks to: Alexey Kardashevskiy, Andrea Arcangeli, Cédric Le Goater,
  Christoph Hellwig, David Gibson, Gautham R. Shenoy, Michael Neuling,
  Oliver O'Halloran, Satheesh Rajendran, Shawn Anastasio, Suraj Jitindar
  Singh, Vaibhav Jain"

* tag 'powerpc-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Force a scm-unbind if initial scm-bind fails
  powerpc/papr_scm: Update drc_pmem_unbind() to use H_SCM_UNBIND_ALL
  powerpc/pseries: Update SCM hcall op-codes in hvcall.h
  powerpc/tm: Fix oops on sigreturn on systems without TM
  powerpc/dma: Fix invalid DMA mmap behavior
  KVM: PPC: Book3S HV: XIVE: fix rollback when kvmppc_xive_create fails
  powerpc/xive: Fix loop exit-condition in xive_find_target_in_mask()
  powerpc: fix off by one in max_zone_pfn initialization for ZONE_DMA
  KVM: PPC: Book3S HV: Save and restore guest visible PSSCR bits on pseries
  powerpc/pmu: Set pmcregs_in_use in paca when running as LPAR
  KVM: PPC: Book3S HV: Always save guest pmu for guest capable of nesting
  powerpc/mm: Limit rma_size to 1TB when running without HV mode

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:
 "Bugfixes, a pvspinlock optimization, and documentation moving"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption
  Documentation: move Documentation/virtual to Documentation/virt
  KVM: nVMX: Set cached_vmcs12 and cached_shadow_vmcs12 NULL after free
  KVM: X86: Dynamically allocate user_fpu
  KVM: X86: Fix fpu state crash in kvm guest
  Revert "kvm: x86: Use task structs fpu field for user"
  KVM: nVMX: Clear pending KVM_REQ_GET_VMCS12_PAGES when leaving nested

Merge tag 'dma-mapping-5.3-2' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping regression fix from Christoph Hellwig:
 "Ensure that dma_addressing_limited doesn't crash on devices without a
  dma mask (Eric Auger)"

* tag 'dma-mapping-5.3-2' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: use dma_get_mask in dma_addressing_limited

selinux: check sidtab limit before adding a new entry

We need to error out when trying to add an entry above SIDTAB_MAX in
sidtab_reverse_lookup() to avoid overflow on the odd chance that this
happens.

Cc: stable@vger.kernel.org
Fixes: ee1a84fdfeed ("selinux: overhaul sidtab to fix bug and improve performance")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Paul Moore <paul@paul-moore.com>

dt-bindings: clk: allwinner,sun4i-a10-ccu: Correct path in $id

The path in the schema '$id' value is wrong. Fix it.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: linux-clk@vger.kernel.org
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>

KVM: X86: Boost queue head vCPU to mitigate lock waiter preemption

Commit 11752adb (locking/pvqspinlock: Implement hybrid PV queued/unfair locks)
introduces hybrid PV queued/unfair locks
 - queued mode (no starvation)
 - unfair mode (good performance on not heavily contended lock)
The lock waiter goes into the unfair mode especially in VMs with over-commit
vCPUs since increaing over-commitment increase the likehood that the queue
head vCPU may have been preempted and not actively spinning.

However, reschedule queue head vCPU timely to acquire the lock still can get
better performance than just depending on lock stealing in over-subscribe
scenario.

Testing on 80 HT 2 socket Xeon Skylake server, with 80 vCPUs VM 80GB RAM:
ebizzy -M
             vanilla     boosting    improved
 1VM          23520        25040         6%
 2VM           8000        13600        70%
 3VM           3100         5400        74%

The lock holder vCPU yields to the queue head vCPU when unlock, to boost queue
head vCPU which is involuntary preemption or the one which is voluntary halt
due to fail to acquire the lock after a short spin in the guest.

Cc: Waiman Long <longman@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

x86/entry/32: Pass cr2 to do_async_page_fault()

Commit a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption") added the
address parameter to do_async_page_fault(), but does not pass it from the
32-bit entry point.  To plumb it through, factor-out
common_exception_read_cr2 in the same fashion as common_exception, and uses
it from both page_fault and async_page_fault.

For a 32-bit KVM guest, this fixes:

  Run /sbin/init as init process
  Starting init: /sbin/init exists but couldn't execute it (error -14)

Fixes: a0d14b8909de ("x86/mm, tracing: Fix CR2 corruption")
Signed-off-by: Matt Mullins <mmullins@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190724042058.24506-1-mmullins@fb.com

fpga-manager: altera-ps-spi: Fix build error

If BITREVERSE is m and FPGA_MGR_ALTERA_PS_SPI is y,
build fails:

drivers/fpga/altera-ps-spi.o: In function `altera_ps_write':
altera-ps-spi.c:(.text+0x4ec): undefined reference to `byte_rev_table'

Select BITREVERSE to fix this.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: fcfe18f885f6 ("fpga-manager: altera-ps-spi: use bitrev8x4")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20190708071356.50928-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mei: me: add mule creek canyon (EHL) device ids

Add Mule Creek Canyon (PCH) MEI device ids for Elkhart Lake (EHL) Platform.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190712095814.20746-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: prevent transactions to context manager from its own process.

Currently, a transaction to context manager from its own process
is prevented by checking if its binder_proc struct is the same as
that of the sender. However, this would not catch cases where the
process opens the binder device again and uses the new fd to send
a transaction to the context manager.

Reported-by: syzbot+8b3c354d33c4ac78bfad@syzkaller.appspotmail.com
Signed-off-by: Hridya Valsaraju <hridya@google.com>
Acked-by: Todd Kjos <tkjos@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190715191804.112933-1-hridya@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

binder: Set end of SG buffer area properly.

In case the target node requests a security context, the
extra_buffers_size is increased with the size of the security context.
But, that size is not available for use by regular scatter-gather
buffers; make sure the ending of that buffer is marked correctly.

Acked-by: Todd Kjos <tkjos@google.com>
Fixes: ec74136ded79 ("binder: create node flag to request sender's security context")
Signed-off-by: Martijn Coenen <maco@android.com>
Cc: stable@vger.kernel.org # 5.1+
Link: https://lore.kernel.org/r/20190709110923.220736-1-maco@android.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation: move Documentation/virtual to Documentation/virt

Renaming docs seems to be en vogue at the moment, so fix on of the
grossly misnamed directories.  We usually never use "virtual" as
a shortcut for virtualization in the kernel, but always virt,
as seen in the virt/ top-level directory.  Fix up the documentation
to match that.

Fixes: ed16648eb5b8 ("Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

scsi: scsi_dh_alua: always use a 2 second delay before retrying RTPG

Retrying immediately after we've received a 'transitioning' sense code is
pretty much pointless, we should always use a delay before retrying.  So
ensure the default delay is applied before retrying.

Signed-off-by: Hannes Reinecke <hare@suse.com>
Tested-by: Zhangguanghui <zhang.guanghui@h3c.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ibmvfc: fix WARN_ON during event pool release

While removing an ibmvfc client adapter a WARN_ON like the following
WARN_ON is seen in the kernel log:

WARNING: CPU: 6 PID: 5421 at ./include/linux/dma-mapping.h:541
ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
CPU: 6 PID: 5421 Comm: rmmod Tainted: G            E     4.17.0-rc1-next-20180419-autotest #1
NIP:  d00000000290328c LR: d00000000290325c CTR: c00000000036ee20
REGS: c000000288d1b7e0 TRAP: 0700   Tainted: G            E      (4.17.0-rc1-next-20180419-autotest)
MSR:  800000010282b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 44008828  XER: 20000000
CFAR: c00000000036e408 SOFTE: 1
GPR00: d00000000290325c c000000288d1ba60 d000000002917900 c000000289d75448
GPR04: 0000000000000071 c0000000ff870000 0000000018040000 0000000000000001
GPR08: 0000000000000000 c00000000156e838 0000000000000001 d00000000290c640
GPR12: c00000000036ee20 c00000001ec4dc00 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 00000100276901e0 0000000010020598
GPR20: 0000000010020550 0000000010020538 0000000010020578 00000000100205b0
GPR24: 0000000000000000 0000000000000000 0000000010020590 5deadbeef0000100
GPR28: 5deadbeef0000200 d000000002910b00 0000000000000071 c0000002822f87d8
NIP [d00000000290328c] ibmvfc_free_event_pool+0x12c/0x1f0 [ibmvfc]
LR [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc]
Call Trace:
[c000000288d1ba60] [d00000000290325c] ibmvfc_free_event_pool+0xfc/0x1f0 [ibmvfc] (unreliable)
[c000000288d1baf0] [d000000002909390] ibmvfc_abort_task_set+0x7b0/0x8b0 [ibmvfc]
[c000000288d1bb70] [c0000000000d8c68] vio_bus_remove+0x68/0x100
[c000000288d1bbb0] [c0000000007da7c4] device_release_driver_internal+0x1f4/0x2d0
[c000000288d1bc00] [c0000000007da95c] driver_detach+0x7c/0x100
[c000000288d1bc40] [c0000000007d8af4] bus_remove_driver+0x84/0x140
[c000000288d1bcb0] [c0000000007db6ac] driver_unregister+0x4c/0xa0
[c000000288d1bd20] [c0000000000d6e7c] vio_unregister_driver+0x2c/0x50
[c000000288d1bd50] [d00000000290ba0c] cleanup_module+0x24/0x15e0 [ibmvfc]
[c000000288d1bd70] [c0000000001dadb0] sys_delete_module+0x220/0x2d0
[c000000288d1be30] [c00000000000b284] system_call+0x58/0x6c
Instruction dump:
e8410018 e87f0068 809f0078 e8bf0080 e8df0088 2fa30000 419e008c e9230200
2fa90000 419e0080 894d098a 794a07e0 <0b0a0000> e9290008 2fa90000 419e0028

This is tripped as a result of irqs being disabled during the call to
dma_free_coherent() by ibmvfc_free_event_pool(). At this point in the code path
we have quiesced the adapter and its overly paranoid anyways to be holding the
host lock.

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: fcoe: fix a typo

#define relative to FCOE CTLR start with FCOE_CTLR, except
FCOE_CTRL_SOL_TOV.

This is likely a typo and CTRL should be CTLR here as well.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: Make some functions static

Fix sparse warnings:

drivers/scsi/megaraid/megaraid_sas_fusion.c:541:1: warning: symbol 'megasas_alloc_cmdlist_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:580:1: warning: symbol 'megasas_alloc_request_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:661:1: warning: symbol 'megasas_alloc_reply_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:738:1: warning: symbol 'megasas_alloc_rdpq_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:920:1: warning: symbol 'megasas_alloc_cmds_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:1740:1: warning: symbol 'megasas_init_adapter_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:1966:1: warning: symbol 'map_cmd_status' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:2379:1: warning: symbol 'megasas_set_pd_lba' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:2718:1: warning: symbol 'megasas_build_ldio_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3215:1: warning: symbol 'megasas_build_io_fusion' was not declared. Should it be static?
drivers/scsi/megaraid/megaraid_sas_fusion.c:3328:6: warning: symbol 'megasas_prepare_secondRaid1_IO' was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: fix panic on loading firmware crashdump

While loading fw crashdump in function fw_crash_buffer_show(), left bytes
in one dma chunk was not checked, if copying size over it, overflow access
will cause kernel panic.

Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid_sas: fix spelling mistake "megarid_sas" -> "megaraid_sas"

Fix spelling mistake in kernel warning message and replace printk with with
pr_warn.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Merge branch 'parisc-5.3-3' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:

 - Fix build issues when kprobes are enabled

 - Speed up ITLB/DTLB cache flushes when running on machines with
   combined TLBs

* 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Flush ITLB in flush_tlb_all_local() only on split TLB machines
  parisc: add kprobe_fault_handler()

Merge tag 'perf-urgent-for-mingo-5.3-20190723' of git://git./linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

perf.data:

  Alexey Budankov:

  - Fix loading of compressed data split across adjacent records

  Jiri Olsa:

  - Fix buffer size setting for processing CPU topology perf.data header.

perf stat:

  Jiri Olsa:

  - Fix segfault for event group in repeat mode

  Cong Wang:

  - Always separate "stalled cycles per insn" line, it was being appended to
    the "instructions" line.

perf script:

  Andi Kleen:

  - Fix --max-blocks man page description.

  - Improve man page description of metrics.

  - Fix off by one in brstackinsn IPC computation.

perf probe:

  Arnaldo Carvalho de Melo:

  - Avoid calling freeing routine multiple times for same pointer.

perf build:

  - Do not use -Wshadow on gcc < 4.8, avoiding too strict warnings
    treated as errors, breaking the build.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

drm/amd/display: Set enabled to false at start of audio disable

[Why]
In an effort to stop redundant calls to dce110_disable_audio_stream
the audio->enabled flag was added to the audio resource struct. While
this state probably shouldn't have been tracked on the audio struct
itself it still works fine for some sequences.

However, it does not work for cases where we're freeing the audio
resource (such as hotplugs) or when dynamic audio is enabled.

In these cases the pipe_ctx->stream_res.audio = NULL before we can
set audio->enabled = false. The next time we acquire the audio resource
such as on hotplug the audio will not be enabled for the stream since
DC thinks it's still enabled.

Audio state tracking should cover this sequence.

[How]
Set audio->enabled = false at the start as long as we have
pipe_ctx->stream_res.audio.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Zhan Liu <Zhan.Liu@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'imx-fixes-5.3' of git://git./linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.3:
 - Fix i.MX8MM SAI3 RXC/TXFS pinmux configuration.
 - Fix i.MX7ULP usb-phy unit address to drop extra '0x' notation.
 - Fix typo of clock frequency property name in a few i.MX6UL board
   I2C buses.
 - Drop "fsl,imx6sx-sai" from i.MX8M SAI device, as it's not compatible
   with i.MX6SX SAI.

* tag 'imx-fixes-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mq: fix SAI compatible
  arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1
  ARM: dts: imx6ul: fix clock frequency property name of I2C buses
  ARM: dts: imx7ulp: Fix usb-phy unit address format

Link: https://lore.kernel.org/r/20190723090827.GU15632@dragon
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: defconfig: u8500: Add new drivers

This enables the new or updates driver options for U8500
that got merged into v5.3-rc1:

- CMA, MCDE driver, LIMA driver and the Samsung S6D16D0 driver
  enabled by default bringing up the new graphics support.
  Include the LOGO so we can see when the graphics are live.
- We use the IIO hwmon bridge for reflecting temperature
  in the system.
- Set MUSB to PIO mode as this is the one working most stable
  for the time being.
- HWSPINLOCK needs to be set to get the hardware semaphore
  driver to compile and link properly.

Link: https://lore.kernel.org/r/20190723081523.13079-2-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: defconfig: u8500: Refresh defconfig

This refreshes the outdated U8500 defconfig: some options
moved around, PS/2 mouse is no longer default on, crypto
options moved around etc.

Link: https://lore.kernel.org/r/20190723081523.13079-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: dts: bcm: bcm47094: add missing #cells for mdio-bus-mux

The mdio-bus-mux has no #address-cells/#size-cells property,
which causes a few dtc warnings:

arch/arm/boot/dts/bcm47094-linksys-panamera.dts:129.4-18: Warning (reg_format): /mdio-bus-mux/mdio@200:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-linksys-panamera.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #address-cells value
arch/arm/boot/dts/bcm47094-linksys-panamera.dts:128.22-132.5: Warning (avoid_default_addr_size): /mdio-bus-mux/mdio@200: Relying on default #size-cells value

Add the normal cell numbers.

Link: https://lore.kernel.org/r/20190722145618.1155492-1-arnd@arndb.de
Fixes: 2bebdfcdcd0f ("ARM: dts: BCM5301X: Add support for Linksys EA9500")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: davinci: fix sleep.S build error on ARMv4

When building a multiplatform kernel that includes armv4 support,
the default target CPU does not support the blx instruction,
which leads to a build failure:

arch/arm/mach-davinci/sleep.S: Assembler messages:
arch/arm/mach-davinci/sleep.S:56: Error: selected processor does not support `blx ip' in ARM mode

Add a .arch statement in the sources to make this file build.

Link: https://lore.kernel.org/r/20190722145211.1154785-1-arnd@arndb.de
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

selftests/x86: fix spelling mistake "FAILT" -> "FAIL"

There is an spelling mistake in an a test error message. Fix it.

Acked-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

selftests: kmod: Fix typo in kmod.sh

This patch fixes some spelling typos in kmod.sh

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Revert "nvme-pci: don't create a read hctx mapping without read queues"

This reverts commit 0298d5435276e7795b0b939d74827f6e775e7009.

With this patch, set 'poll_queues > hard queues' will lead to 'nr_read_queues = 0'
in nvme_calc_irq_sets. Then poll_queues setting can fail since dev->tagset.nr_maps
equals to 2 and nvme_pci_map_queues will not do map for poll queues.

Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: fix multipath crash when ANA is deactivated

Fix a crash with multipath activated. It happends when ANA log
page is larger than MDTS and because of that ANA is disabled.
The driver then tries to access unallocated buffer when connecting
to a nvme target. The signature is as follows:

[  300.433586] nvme nvme0: ANA log page size (8208) larger than MDTS (8192).
[  300.435387] nvme nvme0: disabling ANA support.
[  300.437835] nvme nvme0: creating 4 I/O queues.
[  300.459132] nvme nvme0: new ctrl: NQN "nqn.0.0.0", addr 10.91.0.1:8009
[  300.464609] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[  300.466342] #PF error: [normal kernel read fault]
[  300.467385] PGD 0 P4D 0
[  300.467987] Oops: 0000 [#1] SMP PTI
[  300.468787] CPU: 3 PID: 50 Comm: kworker/u8:1 Not tainted 5.0.20kalray+ #4
[  300.470264] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[  300.471532] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[  300.472724] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.474038] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.477374] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.478334] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.479784] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.481488] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.483203] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.484928] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.486626] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.488538] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.489907] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.491612] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.493303] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.494991] Call Trace:
[  300.495645]  nvme_mpath_add_disk+0x5c/0xb0 [nvme_core]
[  300.496880]  nvme_validate_ns+0x2ef/0x550 [nvme_core]
[  300.498105]  ? nvme_identify_ctrl.isra.45+0x6a/0xb0 [nvme_core]
[  300.499539]  nvme_scan_work+0x2b4/0x370 [nvme_core]
[  300.500717]  ? __switch_to_asm+0x35/0x70
[  300.501663]  process_one_work+0x171/0x380
[  300.502340]  worker_thread+0x49/0x3f0
[  300.503079]  kthread+0xf8/0x130
[  300.503795]  ? max_active_store+0x80/0x80
[  300.504690]  ? kthread_bind+0x10/0x10
[  300.505502]  ret_from_fork+0x35/0x40
[  300.506280] Modules linked in: nvme_tcp nvme_rdma rdma_cm iw_cm ib_cm ib_core nvme_fabrics nvme_core xt_physdev ip6table_raw ip6table_mangle ip6table_filter ip6_tables xt_comment iptable_nat nf_nat_ipv4 nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_CHECKSUM iptable_mangle iptable_filter veth ebtable_filter ebtable_nat ebtables iptable_raw vxlan ip6_udp_tunnel udp_tunnel sunrpc joydev pcspkr virtio_balloon br_netfilter bridge stp llc ip_tables xfs libcrc32c ata_generic pata_acpi virtio_net virtio_console net_failover virtio_blk failover ata_piix serio_raw libata virtio_pci virtio_ring virtio
[  300.514984] CR2: 0000000000000008
[  300.515569] ---[ end trace faa2eefad7e7f218 ]---
[  300.516354] RIP: 0010:nvme_parse_ana_log+0x21/0x140 [nvme_core]
[  300.517330] Code: 45 01 d2 d8 48 98 c3 66 90 0f 1f 44 00 00 41 57 41 56 41 55 41 54 55 53 48 89 fb 48 83 ec 08 48 8b af 20 0a 00 00 48 89 34 24 <66> 83 7d 08 00 0f 84 c6 00 00 00 44 8b 7d 14 49 89 d5 8b 55 10 48
[  300.520353] RSP: 0018:ffffa50e80fd7cb8 EFLAGS: 00010296
[  300.521229] RAX: 0000000000000001 RBX: ffff9130f1872258 RCX: 0000000000000000
[  300.522399] RDX: ffffffffc06c4c30 RSI: ffff9130edad4280 RDI: ffff9130f1872258
[  300.523560] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
[  300.524734] R10: 0000000000000220 R11: 0000000000000040 R12: ffff9130f18722c0
[  300.525915] R13: ffff9130f18722d0 R14: ffff9130edad4280 R15: ffff9130f18722c0
[  300.527084] FS:  0000000000000000(0000) GS:ffff9130f7b80000(0000) knlGS:0000000000000000
[  300.528396] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  300.529440] CR2: 0000000000000008 CR3: 00000002365e6000 CR4: 00000000000006e0
[  300.530739] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  300.531989] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  300.533264] Kernel panic - not syncing: Fatal exception
[  300.534338] Kernel Offset: 0x17c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[  300.536227] ---[ end Kernel panic - not syncing: Fatal exception ]---

Condition check refactoring from Christoph Hellwig.

Signed-off-by: Marta Rybczynska <marta.rybczynska@kalray.eu>
Tested-by: Jean-Baptiste Riaux <jbriaux@kalray.eu>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: fix memory leak caused by incorrect subsystem free

When freeing the subsystem after finding another match with
__nvme_find_get_subsystem(), use put_device() instead of
__nvme_release_subsystem() which calls kfree() directly.

Per the documentation, put_device() should always be used
after device_initialization() is called. Otherwise, leaks
like the one below which was detected by kmemleak may occur.

Once the call of __nvme_release_subsystem() is removed it no
longer makes sense to keep the helper, so fold it back
into nvme_release_subsystem().

unreferenced object 0xffff8883d12bfbc0 (size 16):
  comm "nvme", pid 2635, jiffies 4294933602 (age 739.952s)
  hex dump (first 16 bytes):
    6e 76 6d 65 2d 73 75 62 73 79 73 32 00 88 ff ff  nvme-subsys2....
  backtrace:
    [<000000007d8fc208>] __kmalloc_track_caller+0x16d/0x2a0
    [<0000000081169e5f>] kvasprintf+0xad/0x130
    [<0000000025626f25>] kvasprintf_const+0x47/0x120
    [<00000000fa66ad36>] kobject_set_name_vargs+0x44/0x120
    [<000000004881f8b3>] dev_set_name+0x98/0xc0
    [<000000007124dae3>] nvme_init_identify+0x1995/0x38e0
    [<000000009315020a>] nvme_loop_configure_admin_queue+0x4fa/0x5e0
    [<000000001a63e766>] nvme_loop_create_ctrl+0x489/0xf80
    [<00000000a46ecc23>] nvmf_dev_write+0x1a12/0x2220
    [<000000002259b3d5>] __vfs_write+0x66/0x120
    [<000000002f6df81e>] vfs_write+0x154/0x490
    [<000000007e8cfc19>] ksys_write+0x10a/0x240
    [<00000000ff5c7b85>] __x64_sys_write+0x73/0xb0
    [<00000000fee6d692>] do_syscall_64+0xaa/0x470
    [<00000000997e1ede>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: ab9e00cc72fa ("nvme: track subsystems")
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme: ignore subnqn for ADATA SX6000LNP

The ADATA SX6000LNP NVMe SSDs have the same subnqn and, due to this, a
system with more than one of these SSDs will only have one usable.

[ 0.942706] nvme nvme1: ignoring ctrl due to duplicate subnqn (nqn.2018-05.com.example:nvme:nvm-subsystem-OUI00E04C).
[ 0.943017] nvme nvme1: Removing after probe failure status: -22

02:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)
71:00.0 Non-Volatile memory controller [0108]: Realtek Semiconductor Co., Ltd. Device [10ec:5762] (rev 01)

There are no firmware updates available from the vendor, unfortunately.
Applying the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk for these SSDs resolves
the issue, and they all work after this patch:

/dev/nvme0n1     2J1120050420         ADATA SX6000LNP [...]
/dev/nvme1n1     2J1120050540         ADATA SX6000LNP [...]

Signed-off-by: Misha Nasledov <misha@nasledov.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

dma-mapping: use dma_get_mask in dma_addressing_limited

We currently have cases where the dma_addressing_limited() gets
called with dma_mask unset. This causes a NULL pointer dereference.

Use dma_get_mask() accessor to prevent the crash.

Fixes: b866455423e0 ("dma-mapping: add a dma_addressing_limited helper")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

iommu/amd: Add support for X2APIC IOMMU interrupts

AMD IOMMU requires IntCapXT registers to be setup in order to generate
its own interrupts (for Event Log, PPR Log, and GA Log) with 32-bit
APIC destination ID. Without this support, AMD IOMMU MSI interrupts
will not be routed correctly when booting the system in X2APIC mode.

Cc: Joerg Roedel <joro@8bytes.org>
Fixes: 90fcffd9cf5e ('iommu/amd: Add support for IOMMU XT mode')
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

ACPI/IORT: Fix off-by-one check in iort_dev_find_its_id()

Static analysis identified that index comparison against ITS entries in
iort_dev_find_its_id() is off by one.

Update the comparison condition and clarify the resulting error
message.

Fixes: 4bf2efd26d76 ("ACPI: Add new IORT functions to support MSI domain handling")
Link: https://lore.kernel.org/linux-arm-kernel/20190613065410.GB16334@mwanda/
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>

drbd: dynamically allocate shash descriptor

Building with clang and KASAN, we get a warning about an overly large
stack frame on 32-bit architectures:

drivers/block/drbd/drbd_receiver.c:921:31: error: stack frame size of 1280 bytes in function 'conn_connect'
      [-Werror,-Wframe-larger-than=]

We already allocate other data dynamically in this function, so
just do the same for the shash descriptor, which makes up most of
this memory.

Link: https://lore.kernel.org/lkml/20190617132440.2721536-1-arnd@arndb.de/
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Roland Kammerer <roland.kammerer@linbit.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

block: blk-mq: Remove blk_mq_sched_started_request and started_request

blk_mq_sched_completed_request is a function that checks if the elevator
related to the request has started_request implemented, but currently, none of
the available IO schedulers implement started_request, so remove both.

Signed-off-by: Marcos Paulo de Souza <marcos.souza.org@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ALSA: ac97: Fix double free of ac97_codec_device

put_device will call ac97_codec_release to free
ac97_codec_device and other resources, so remove the kfree
and other redundant code.

Fixes: 74426fbff66e ("ALSA: ac97: add an ac97 bus")
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

perf build: Do not use -Wshadow on gcc < 4.8

As it is too strict, see https://lkml.org/lkml/2006/11/28/253 and
https://gcc.gnu.org/gcc-4.8/changes.html, that takes into account
Linus's comments (search for Wshadow) for the reasoning about -Wshadow
not being interesting before gcc 4.8.

Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20190719183417.GQ3624@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Avoid calling freeing routine multiple times for same pointer

When perf_add_probe_events() we call cleanup_perf_probe_events() for the
pev pointer it receives, then, as part of handling this failure the main
'perf probe' goes on and calls cleanup_params() and that will again call
cleanup_perf_probe_events()for the same pointer, so just set nevents to
zero when handling the failure of perf_add_probe_events() to avoid the
double free.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-x8qgma4g813z96dvtw9w219q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Set pev->nargs to zero after freeing pev->args entries

So that, when perf_add_probe_events() fails, like in:

  # perf probe icmp_rcv:64 "type=icmph->type"
  Failed to find 'icmph' in this function.
    Error: Failed to add events.
  Segmentation fault (core dumped)
  #

We don't segfault.

clear_perf_probe_event() was zeroing the whole pev, and since the switch
to zfree() for the members in the pev, that memset() was removed, which
left nargs with its original value, in the above case 1.

With the memset the same pev could be passed to clear_perf_probe_event()
multiple times, since all it would have would be zeroes, and free()
accepts zero, the loop would not happen and we would just memset it
again to zeroes.

Without it we got that segfault, so zero nargs to keep it like it was,
next cset will avoid calling clear_perf_probe_event() for the same pevs
in case of failure.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Fixes: d8f9da240495 ("perf tools: Use zfree() where applicable")
Link: https://lkml.kernel.org/n/tip-802f2jypnwqsvyavvivs8464@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf session: Fix loading of compressed data split across adjacent records

Fix decompression failure found during the loading of compressed trace
collected on larger scale systems (>48 cores).

The error happened due to lack of decompression space for a mmaped
buffer data chunk split across adjacent PERF_RECORD_COMPRESSED records.

  $ perf report -i bt.16384.data --stats
  failed to decompress (B): 63869 -> 0 : Destination buffer is too small
  user stack dump failure
  Can't parse sample, err = -14
  0x2637e436 [0x4080]: failed to process type: 9
  Error:
  failed to process sample

  $ perf test 71
  71: Zstd perf.data compression/decompression              : Ok

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/4d839e1b-9c48-89c4-9702-a12217420611@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Always separate stalled cycles per insn

The "stalled cycles per insn" is appended to "instructions" when the CPU
has this hardware counter directly. We should always make it a separate
line, which also aligns to the output when we hit the "if (total &&
avg)" branch.

Before:

  $ sudo perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1
  4565048704,,instructions,64114578096,100.00,1.34,insn per cycle,,
  3396325133,,cycles,64146628546,100.00,,

After:

  $ sudo ./tools/perf/perf stat --all-cpus --field-separator , --log-fd 1 -einstructions,cycles -- sleep 1
  6721924,,instructions,24026790339,100.00,0.22,insn per cycle
  ,,,,,0.00,stalled cycles per insn
  30939953,,cycles,24025512526,100.00,,

Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20190517221039.8975-1-xiyou.wangcong@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Fix segfault for event group in repeat mode

Numfor Mbiziwo-Tiapo reported segfault on stat of event group in repeat
mode:

  # perf stat -e '{cycles,instructions}' -r 10 ls

It's caused by memory corruption due to not cleaned evsel's id array and
index, which needs to be rebuilt in every stat iteration. Currently the
ids index grows, while the array (which is also not freed) has the same
size.

Fixing this by releasing id array and zeroing ids index in
perf_evsel__close function.

We also need to keep the evsel_list alive for stat record (which is
disabled in repeat mode).

Reported-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190715142121.GC6032@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix proper buffer size for feature processing

After Song Liu's segfault fix for pipe mode, Arnaldo reported following
error:

  # perf record -o - | perf script
  0x514 [0x1ac]: failed to process type: 80

It's caused by wrong buffer size setup in feature processing, which
makes cpu topology feature fail, because it's using buffer size to
recognize its header version.

Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Fixes: e9def1b2e74e ("perf tools: Add feature header record to pipe-mode")
Link: http://lkml.kernel.org/r/20190715140426.32509-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Fix off by one in brstackinsn IPC computation

When we hit the end of a program block, need to count the last
instruction too for the IPC computation. This caused large errors for
small blocks.

  % perf script -b ls / > /dev/null

Before:

  % perf script -F +brstackinsn --xed
  ...
        00007f94c9ac70d8                        jz 0x7f94c9ac70e3                       # PRED 3 cycles [36] 4.33 IPC
        00007f94c9ac70e3                        testb  $0x20, 0x31d(%rbx)
        00007f94c9ac70ea                        jnz 0x7f94c9ac70b0
        00007f94c9ac70ec                        testb  $0x8, 0x205ad(%rip)
        00007f94c9ac70f3                        jz 0x7f94c9ac6ff0               # PRED 1 cycles [37] 3.00 IPC

After:

  % perf script -F +brstackinsn --xed
  ...
        00007f94c9ac70d8                        jz 0x7f94c9ac70e3                       # PRED 3 cycles [15] 4.67 IPC
        00007f94c9ac70e3                        testb  $0x20, 0x31d(%rbx)
        00007f94c9ac70ea                        jnz 0x7f94c9ac70b0
        00007f94c9ac70ec                        testb  $0x8, 0x205ad(%rip)
        00007f94c9ac70f3                        jz 0x7f94c9ac6ff0               # PRED 1 cycles [16] 4.00 IPC

Suggested-by: Denis Bakhvalov <denis.bakhvalov@intel.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190711181922.18765-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Improve man page description of metrics

Clarify that a metric is based on events, not referring to itself. Also
some improvements with the sentences.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190711181922.18765-3-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf script: Fix --max-blocks man page description

The --max-blocks description was using the old name brstackasm.  Use
brstackinsn instead.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20190711181922.18765-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

ALSA: compress: Be more restrictive about when a drain is allowed

Draining makes little sense in the situation of hardware overrun, as the
hardware will have consumed all its available samples. Additionally,
draining whilst the stream is paused would presumably get stuck as no
data is being consumed on the DSP side.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: compress: Don't allow paritial drain operations on capture streams

Partial drain and next track are intended for gapless playback and
don't really have an obvious interpretation for a capture stream, so
makes sense to not allow those operations on capture streams.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: compress: Prevent bypasses of set_params

Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call
snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which
allow a transition to SNDRV_PCM_STATE_SETUP. The stream should
only be able to move to the setup state once it has received a
SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing
those ioctls whilst in the open state.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

ALSA: compress: Fix regression on compressed capture streams

A previous fix to the stop handling on compressed capture streams causes
some knock on issues. The previous fix updated snd_compr_drain_notify to
set the state back to PREPARED for capture streams. This causes some
issues however as the handling for snd_compr_poll differs between the
two states and some user-space applications were relying on the poll
failing after the stream had been stopped.

To correct this regression whilst still fixing the original problem the
patch was addressing, update the capture handling to skip the PREPARED
state rather than skipping the SETUP state as it has done until now.

Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Acked-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

s390/kasan: add bitops instrumentation

Add KASAN instrumentation of architecture-specific asm implementation
of bitops. It also covers s390 specific *_inv functions.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>

s390/bitops: make test functions return bool

Make s390/bitops test functions return bool values. That enforces return
value range to 0 and 1 and matches with asm-generic/bitops-instrumented.h
declarations as well as some other architectures implementations.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>