sfrench/cifs-2.6.git
3 years agobtrfs: user proper type for btrfs_mask_flags flags
David Sterba [Mon, 26 Mar 2018 16:29:41 +0000 (18:29 +0200)]
btrfs: user proper type for btrfs_mask_flags flags

All users pass a local unsigned int and not the __uXX types that are
supposed to be used for userspace interfaces.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: split dev-replace locking helpers for read and write
David Sterba [Sat, 24 Mar 2018 01:11:38 +0000 (02:11 +0100)]
btrfs: split dev-replace locking helpers for read and write

The current calls are unclear in what way btrfs_dev_replace_lock takes
the locks, so drop the argument, split the helpers and use similar
naming as for read and write locks.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: remove stale comments about fs_mutex
David Sterba [Tue, 27 Mar 2018 18:08:28 +0000 (20:08 +0200)]
btrfs: remove stale comments about fs_mutex

The fs_mutex has been killed in 2008, a213501153fd66e2 ("Btrfs: Replace
the big fs_mutex with a collection of other locks"), still remembered in
some comments.

We don't have any extra needs for locking in the ACL handlers.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: use RCU in btrfs_show_devname for device list traversal
David Sterba [Fri, 16 Mar 2018 02:27:02 +0000 (03:27 +0100)]
btrfs: use RCU in btrfs_show_devname for device list traversal

The show_devname callback is used to print device name in
/proc/self/mounts, we need to traverse the device list consistently and
read the name that's copied to a seq buffer so we don't need further
locking.

If the first device is being deleted at the same time, the RCU will
allow us to read the device name, though it will become stale right
after the RCU protection ends. This is unavoidable and the user can
expect that the device will disappear from the filesystem's list at some
point.

The device_list_mutex was pretty heavy as it is used eg. for writing
superblock and a few other IO related contexts. This can stall any
application that reads the proc file for no reason.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: update barrier in should_cow_block
David Sterba [Fri, 16 Mar 2018 01:39:40 +0000 (02:39 +0100)]
btrfs: update barrier in should_cow_block

Once there was a simple int force_cow that was used with the plain
barriers, and then converted to a bit, so we should use the appropriate
barrier helper.

Other variables in the complex if condition do not depend on a barrier,
so we should be fine in case the atomic barrier becomes a no-op.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: use lockdep_assert_held for mutexes
David Sterba [Fri, 16 Mar 2018 01:21:22 +0000 (02:21 +0100)]
btrfs: use lockdep_assert_held for mutexes

Using lockdep_assert_held is preferred, replace mutex_is_locked.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: use lockdep_assert_held for spinlocks
David Sterba [Fri, 16 Mar 2018 01:21:22 +0000 (02:21 +0100)]
btrfs: use lockdep_assert_held for spinlocks

Using lockdep_assert_held is preferred, replace assert_spin_locked.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Validate child tree block's level and first key
Qu Wenruo [Thu, 29 Mar 2018 01:08:11 +0000 (09:08 +0800)]
btrfs: Validate child tree block's level and first key

We have several reports about node pointer points to incorrect child
tree blocks, which could have even wrong owner and level but still with
valid generation and checksum.

Although btrfs check could handle it and print error message like:
leaf parent key incorrect 60670574592

Kernel doesn't have enough check on this type of corruption correctly.
At least add such check to read_tree_block() and btrfs_read_buffer(),
where we need two new parameters @level and @first_key to verify the
child tree block.

The new @level check is mandatory and all call sites are already
modified to extract expected level from its call chain.

While @first_key is optional, the following call sites are skipping such
check:
1) Root node/leaf
   As ROOT_ITEM doesn't contain the first key, skip @first_key check.
2) Direct backref
   Only parent bytenr and level is known and we need to resolve the key
   all by ourselves, skip @first_key check.

Another note of this verification is, it needs extra info from nodeptr
or ROOT_ITEM, so it can't fit into current tree-checker framework, which
is limited to node/leaf boundary.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: tests/qgroup: Fix wrong tree backref level
Qu Wenruo [Tue, 27 Mar 2018 12:44:18 +0000 (20:44 +0800)]
btrfs: tests/qgroup: Fix wrong tree backref level

The extent tree of the test fs is like the following:

 BTRFS info (device (null)): leaf 16327509003777336587 total ptrs 1 free space 3919
  item 0 key (4096 168 4096) itemoff 3944 itemsize 51
          extent refs 1 gen 1 flags 2
          tree block key (68719476736 0 0) level 1
                                           ^^^^^^^
          ref#0: tree block backref root 5

And it's using an empty tree for fs tree, so there is no way that its
level can be 1.

For REAL (created by mkfs) fs tree backref with no skinny metadata, the
result should look like:

 item 3 key (30408704 EXTENT_ITEM 4096) itemoff 3845 itemsize 51
         refs 1 gen 4 flags TREE_BLOCK
         tree block key (256 INODE_ITEM 0) level 0
                                           ^^^^^^^
         tree block backref root 5

Fix the level to 0, so it won't break later tree level checker.

Fixes: faa2dbf004e8 ("Btrfs: add sanity tests for new qgroup accounting code")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: fix copy_items() return value when logging an inode
Filipe Manana [Mon, 26 Mar 2018 22:59:12 +0000 (23:59 +0100)]
Btrfs: fix copy_items() return value when logging an inode

When logging an inode, at tree-log.c:copy_items(), if we call
btrfs_next_leaf() at the loop which checks for the need to log holes, we
need to make sure copy_items() returns the value 1 to its caller and
not 0 (on success). This is because the path the caller passed was
released and is now different from what is was before, and the caller
expects a return value of 0 to mean both success and that the path
has not changed, while a return value of 1 means both success and
signals the caller that it can not reuse the path, it has to perform
another tree search.

Even though this is a case that should not be triggered on normal
circumstances or very rare at least, its consequences can be very
unpredictable (especially when replaying a log tree).

Fixes: 16e7549f045d ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: fix fsync after hole punching when using no-holes feature
Filipe Manana [Mon, 26 Mar 2018 22:59:00 +0000 (23:59 +0100)]
Btrfs: fix fsync after hole punching when using no-holes feature

When we have the no-holes mode enabled and fsync a file after punching a
hole in it, we can end up not logging the whole hole range in the log tree.
This happens if the file has extent items that span more than one leaf and
we punch a hole that covers a range that starts in a leaf but does not go
beyond the offset of the first extent in the next leaf.

Example:

  $ mkfs.btrfs -f -O no-holes -n 65536 /dev/sdb
  $ mount /dev/sdb /mnt
  $ for ((i = 0; i <= 831; i++)); do
offset=$((i * 2 * 256 * 1024))
xfs_io -f -c "pwrite -S 0xab -b 256K $offset 256K" \
/mnt/foobar >/dev/null
    done
  $ sync

  # We now have 2 leafs in our filesystem fs tree, the first leaf has an
  # item corresponding the extent at file offset 216530944 and the second
  # leaf has a first item corresponding to the extent at offset 217055232.
  # Now we punch a hole that partially covers the range of the extent at
  # offset 216530944 but does go beyond the offset 217055232.

  $ xfs_io -c "fpunch $((216530944 + 128 * 1024 - 4000)) 256K" /mnt/foobar
  $ xfs_io -c "fsync" /mnt/foobar

  <power fail>

  # mount to replay the log
  $ mount /dev/sdb /mnt

  # Before this patch, only the subrange [216658016216662016[ (length of
  # 4000 bytes) was logged, leaving an incorrect file layout after log
  # replay.

Fix this by checking if there is a hole between the last extent item that
we processed and the first extent item in the next leaf, and if there is
one, log an explicit hole extent item.

Fixes: 16e7549f045d ("Btrfs: incompatible format change to remove hole extents")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: use helper to set ulist aux from a qgroup
David Sterba [Tue, 27 Mar 2018 17:04:50 +0000 (19:04 +0200)]
btrfs: use helper to set ulist aux from a qgroup

We have a nice helper to do proper casting of a qgroup to a ulist aux
value. And several places that could make use of it.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoRevert "btrfs: qgroups: Retry after commit on getting EDQUOT"
Qu Wenruo [Tue, 12 Dec 2017 07:34:36 +0000 (15:34 +0800)]
Revert "btrfs: qgroups: Retry after commit on getting EDQUOT"

This reverts commit 48a89bc4f2ceab87bc858a8eb189636b09c846a7.

The idea to commit transaction and free some space after hitting qgroup
limit is good, although the problem is it can easily cause deadlocks.

One deadlock example is caused by trying to flush data while still
holding it:

Call Trace:
 __schedule+0x49d/0x10f0
 schedule+0xc6/0x290
 schedule_timeout+0x187/0x1c0
 wait_for_completion+0x204/0x3a0
 btrfs_wait_ordered_extents+0xa40/0xaf0 [btrfs]
 qgroup_reserve+0x913/0xa10 [btrfs]
 btrfs_qgroup_reserve_data+0x3ef/0x580 [btrfs]
 btrfs_check_data_free_space+0x96/0xd0 [btrfs]
 __btrfs_buffered_write+0x3ac/0xd40 [btrfs]
 btrfs_file_write_iter+0x62a/0xba0 [btrfs]
 __vfs_write+0x320/0x430
 vfs_write+0x107/0x270
 SyS_write+0xbf/0x150
 do_syscall_64+0x1b0/0x3d0
 entry_SYSCALL64_slow_path+0x25/0x25

Another can be caused by trying to commit one transaction while nesting
with trans handle held by ourselves:

btrfs_start_transaction()
|- btrfs_qgroup_reserve_meta_pertrans()
   |- qgroup_reserve()
      |- btrfs_join_transaction()
      |- btrfs_commit_transaction()

The retry is causing more problems than exppected when limit is enabled.
At least a graceful EDQUOT is way better than deadlock.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Update trace events for metadata reservation
Qu Wenruo [Tue, 12 Dec 2017 07:34:35 +0000 (15:34 +0800)]
btrfs: qgroup: Update trace events for metadata reservation

Now trace_qgroup_meta_reserve() will have extra type parameter.

And introduce two new trace events:

1) trace_qgroup_meta_free_all_pertrans()
   For btrfs_qgroup_free_meta_all_pertrans()

2) trace_qgroup_meta_convert()
   For btrfs_qgroup_convert_reserved_meta()

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space
Qu Wenruo [Tue, 12 Dec 2017 07:34:34 +0000 (15:34 +0800)]
btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space

For quota disabled->enable case, it's possible that at reservation time
quota was not enabled so no bytes were really reserved, while at release
time, quota was enabled so we will try to release some bytes we didn't
really own.

Such situation can cause metadata reserveation underflow, for both types,
also less possible for per-trans type since quota enable will commit
transaction.

To address this, record qgroup meta reserved bytes into
root::qgroup_meta_rsv_pertrans and ::prealloc.
So at releasing time we won't free any bytes we didn't reserve.

For DATA, it's already handled by io_tree, so nothing needs to be done
there.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item
Qu Wenruo [Tue, 12 Dec 2017 07:34:33 +0000 (15:34 +0800)]
btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item

Quite similar for delalloc, some modification to delayed-inode and
delayed-item reservation.  Also needs extra parameter for release case
to distinguish normal release and error release.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Use separate meta reservation type for delalloc
Qu Wenruo [Tue, 12 Dec 2017 07:34:32 +0000 (15:34 +0800)]
btrfs: qgroup: Use separate meta reservation type for delalloc

Before this patch, btrfs qgroup is mixing per-transcation meta rsv with
preallocated meta rsv, making it quite easy to underflow qgroup meta
reservation.

Since we have the new qgroup meta rsv types, apply it to delalloc
reservation.

Now for delalloc, most of its reserved space will use META_PREALLOC qgroup
rsv type.

And for callers reducing outstanding extent like btrfs_finish_ordered_io(),
they will convert corresponding META_PREALLOC reservation to
META_PERTRANS.

This is mainly due to the fact that current qgroup numbers will only be
updated in btrfs_commit_transaction(), that's to say if we don't keep
such placeholder reservation, we can exceed qgroup limitation.

And for callers freeing outstanding extent in error handler, we will
just free META_PREALLOC bytes.

This behavior makes callers of btrfs_qgroup_release_meta() or
btrfs_qgroup_convert_meta() to be aware of which type they are.
So in this patch, btrfs_delalloc_release_metadata() and its callers get
an extra parameter to info qgroup to do correct meta convert/release.

The good news is, even we use the wrong type (convert or free), it won't
cause obvious bug, as prealloc type is always in good shape, and the
type only affects how per-trans meta is increased or not.

So the worst case will be at most metadata limitation can be sometimes
exceeded (no convert at all) or metadata limitation is reached too soon
(no free at all).

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Introduce function to convert META_PREALLOC into META_PERTRANS
Qu Wenruo [Tue, 12 Dec 2017 07:34:31 +0000 (15:34 +0800)]
btrfs: qgroup: Introduce function to convert META_PREALLOC into META_PERTRANS

For meta_prealloc reservation users, after btrfs_join_transaction()
caller will modify tree so part (or even all) meta_prealloc reservation
should be converted to meta_pertrans until transaction commit time.

This patch introduces a new function,
btrfs_qgroup_convert_reserved_meta() to do this for META_PREALLOC
reservation user.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Don't use root->qgroup_meta_rsv for qgroup
Qu Wenruo [Tue, 12 Dec 2017 07:34:30 +0000 (15:34 +0800)]
btrfs: qgroup: Don't use root->qgroup_meta_rsv for qgroup

Since qgroup has seperate metadata reservation types now, we can
completely get rid of the old root->qgroup_meta_rsv, which mostly acts
as current META_PERTRANS reservation type.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Split meta rsv type into meta_prealloc and meta_pertrans
Qu Wenruo [Tue, 12 Dec 2017 07:34:29 +0000 (15:34 +0800)]
btrfs: qgroup: Split meta rsv type into meta_prealloc and meta_pertrans

Btrfs uses 2 different methods to reseve metadata qgroup space.

1) Reserve at btrfs_start_transaction() time
   This is quite straightforward, caller will use the trans handler
   allocated to modify b-trees.

   In this case, reserved metadata should be kept until qgroup numbers
   are updated.

2) Reserve by using block_rsv first, and later btrfs_join_transaction()
   This is more complicated, caller will reserve space using block_rsv
   first, and then later call btrfs_join_transaction() to get a trans
   handle.

   In this case, before we modify trees, the reserved space can be
   modified on demand, and after btrfs_join_transaction(), such reserved
   space should also be kept until qgroup numbers are updated.

Since these two types behave differently, split the original "META"
reservation type into 2 sub-types:

  META_PERTRANS:
    For above case 1)

  META_PREALLOC:
    For reservations that happened before btrfs_join_transaction() of
    case 2)

NOTE: This patch will only convert existing qgroup meta reservation
callers according to its situation, not ensuring all callers are at
correct timing.
Such fix will be added in later patches.

Signed-off-by: Qu Wenruo <wqu@suse.com>
[ update comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Cleanup the remaining old reservation counters
Qu Wenruo [Tue, 12 Dec 2017 07:34:28 +0000 (15:34 +0800)]
btrfs: qgroup: Cleanup the remaining old reservation counters

So qgroup is switched to new separate types reservation system.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Update trace events to use new separate rsv types
Qu Wenruo [Tue, 12 Dec 2017 07:34:27 +0000 (15:34 +0800)]
btrfs: qgroup: Update trace events to use new separate rsv types

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Fix wrong qgroup reservation update for relationship modification
Qu Wenruo [Tue, 12 Dec 2017 07:34:26 +0000 (15:34 +0800)]
btrfs: qgroup: Fix wrong qgroup reservation update for relationship modification

When modifying qgroup relationship, for qgroup which only owns exclusive
extents, we will go through quick update path.

In this path, we will add/subtract exclusive and reference number for
parent qgroup, since the source (child) qgroup only has exclusive
extents, destination (parent) qgroup will also own or lose those extents
exclusively.

The same should be the same for reservation, since later reservation
adding/releasing will also affect parent qgroup, without the reservation
carried from child, parent will underflow reservation or have dead
reservation which will never be freed.

However original code doesn't do the same thing for reservation.
It handles qgroup reservation quite differently:

It removes qgroup reservation, as it's allocating space from the
reserved qgroup for relationship adding.
But does nothing for qgroup reservation if we're removing a qgroup
relationship.

According to the original code, it looks just like because we're adding
qgroup->rfer, the code assumes we're writing new data, so it's follows
the normal write routine, by reducing qgroup->reserved and adding
qgroup->rfer/excl.

This old behavior is wrong, and should be fixed to follow the same
excl/rfer behavior.

Just fix it by using the correct behavior described above.

Fixes: 31193213f1f9 ("Btrfs: qgroup: Introduce a may_use to account space_info->bytes_may_use.")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Make qgroup_reserve and its callers to use separate reservation type
Qu Wenruo [Tue, 12 Dec 2017 07:34:25 +0000 (15:34 +0800)]
btrfs: qgroup: Make qgroup_reserve and its callers to use separate reservation type

Since most callers of qgroup_reserve() are already defined by type,
converting qgroup_reserve() is quite an easy work.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Introduce helpers to update and access new qgroup rsv
Qu Wenruo [Tue, 12 Dec 2017 07:34:24 +0000 (15:34 +0800)]
btrfs: qgroup: Introduce helpers to update and access new qgroup rsv

Introduce helpers to:

1) Get total reserved space
   For limit calculation
2) Add/release reserved space for given type
   With underflow detection and warning
3) Add/release reserved space according to child qgroup

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Skeleton to support separate qgroup reservation type
Qu Wenruo [Tue, 12 Dec 2017 07:34:23 +0000 (15:34 +0800)]
btrfs: qgroup: Skeleton to support separate qgroup reservation type

Instead of single qgroup->reserved, use a new structure btrfs_qgroup_rsv
to store different types of reservation.

This patch only updates the header needed to compile.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: delete dead code in btrfs_orphan_add()
Omar Sandoval [Thu, 25 Jan 2018 23:56:17 +0000 (15:56 -0800)]
Btrfs: delete dead code in btrfs_orphan_add()

btrfs_orphan_add() has had this case commented out since it was first
introduced in commit d68fc57b7e32 ("Btrfs: Metadata reservation for
orphan inodes"). Most of the orphan cleanup code has been rewritten
since then, so it's safe to say that this code isn't needed.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
[ switch to bool ]
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: ctree.h: Fix wrong comment position about csum size
Misono, Tomohiro [Tue, 20 Mar 2018 06:47:06 +0000 (15:47 +0900)]
btrfs: ctree.h: Fix wrong comment position about csum size

Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: defer adding raid type kobject until after chunk relocation
Jeff Mahoney [Tue, 20 Mar 2018 19:25:26 +0000 (15:25 -0400)]
btrfs: defer adding raid type kobject until after chunk relocation

Any time the first block group of a new type is created, we add a new
kobject to sysfs to hold the attributes for that type.  Kobject-internal
allocations always use GFP_KERNEL, making them prone to fs-reclaim races.
While it appears as if this can occur any time a block group is created,
the only times the first block group of a new type can be created in
memory is at mount and when we create the first new block group during
raid conversion.

This patch adds a new list to track pending kobject additions and then
handles them after we do chunk relocation.  Between relocating the
target chunk (or forcing allocation of a new chunk in the case of data)
and removing the old chunk, we're in a safe place for fs-reclaim to
occur.  We're holding the volume mutex, which is already held across
page faults, and the delete_unused_bgs_mutex, which will only stall
the cleaner thread.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: remove dead create_space_info calls
Jeff Mahoney [Tue, 20 Mar 2018 19:25:25 +0000 (15:25 -0400)]
btrfs: remove dead create_space_info calls

Since commit 2be12ef79 (btrfs: Separate space_info create/update), we've
separated out the creation and updating of the space info structures.
That commit was a straightforward refactoring of the two parts of
update_space_info, but we can go a step further.  Since commits
c59021f84 (Btrfs: fix OOPS of empty filesystem after balance) and
b742bb82f (Btrfs: Link block groups of different raid types), we know
that the space_info structures will be created at mount and there will
only ever be, at most, three of them.

This patch cleans out the create_space_info calls after __find_space_info
returns NULL since __find_space_info *can't* return NULL.

The initial cause for reviewing this was the kobject_add calls from
create_space_info occuring in sites where fs-reclaim wasn't allowed.  Now
we are certain they occur only early in the mount process and are safe.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: replace: cache rbio when rebuild data on missing device
Liu Bo [Thu, 22 Mar 2018 01:20:11 +0000 (09:20 +0800)]
Btrfs: replace: cache rbio when rebuild data on missing device

Rebuild on missing device is as same as recover, after it's done, rbio
has data which is consistent with on-disk data, so it can be cached to
avoid further reads.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: fix lockdep splat in btrfs_alloc_subvolume_writers
Jeff Mahoney [Fri, 16 Mar 2018 18:36:27 +0000 (14:36 -0400)]
btrfs: fix lockdep splat in btrfs_alloc_subvolume_writers

While running btrfs/011, I hit the following lockdep splat.

This is the important bit:
   pcpu_alloc+0x1ac/0x5e0
   __percpu_counter_init+0x4e/0xb0
   btrfs_init_fs_root+0x99/0x1c0 [btrfs]
   btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
   resolve_indirect_refs+0x130/0x830 [btrfs]
   find_parent_nodes+0x69e/0xff0 [btrfs]
   btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
   btrfs_find_all_roots+0x50/0x70 [btrfs]
   btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
   btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]

The percpu_counter_init call in btrfs_alloc_subvolume_writers
uses GFP_KERNEL, which we can't do during transaction commit.

This switches it to GFP_NOFS.

========================================================
WARNING: possible irq lock inversion dependency detected
4.12.14-kvmsmall #8 Tainted: G        W
--------------------------------------------------------
kswapd0/50 just changed the state of lock:
 (&delayed_node->mutex){+.+.-.}, at: [<ffffffffc06994fa>] __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
but this lock took another, RECLAIM_FS-unsafe lock in the past:
 (pcpu_alloc_mutex){+.+.+.}

and interrupts could create inverse lock ordering between them.

other info that might help us debug this:
Chain exists of:
  &delayed_node->mutex --> &found->groups_sem --> pcpu_alloc_mutex

 Possible interrupt unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(pcpu_alloc_mutex);
                               local_irq_disable();
                               lock(&delayed_node->mutex);
                               lock(&found->groups_sem);
  <Interrupt>
    lock(&delayed_node->mutex);

 *** DEADLOCK ***

2 locks held by kswapd0/50:
 #0:  (shrinker_rwsem){++++..}, at: [<ffffffff811dc11f>] shrink_slab+0x7f/0x5b0
 #1:  (&type->s_umount_key#30){+++++.}, at: [<ffffffff8126dec6>] trylock_super+0x16/0x50

the shortest dependencies between 2nd lock and 1st lock:
   -> (pcpu_alloc_mutex){+.+.+.} ops: 4904 {
      HARDIRQ-ON-W at:
                          __mutex_lock+0x4e/0x8c0
                          pcpu_alloc+0x1ac/0x5e0
                          alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                          __do_tune_cpucache+0x2c/0x220
                          do_tune_cpucache+0x26/0xc0
                          enable_cpucache+0x6d/0xf0
                          kmem_cache_init_late+0x42/0x75
                          start_kernel+0x343/0x4cb
                          x86_64_start_kernel+0x127/0x134
                          secondary_startup_64+0xa5/0xb0
      SOFTIRQ-ON-W at:
                          __mutex_lock+0x4e/0x8c0
                          pcpu_alloc+0x1ac/0x5e0
                          alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                          __do_tune_cpucache+0x2c/0x220
                          do_tune_cpucache+0x26/0xc0
                          enable_cpucache+0x6d/0xf0
                          kmem_cache_init_late+0x42/0x75
                          start_kernel+0x343/0x4cb
                          x86_64_start_kernel+0x127/0x134
                          secondary_startup_64+0xa5/0xb0
      RECLAIM_FS-ON-W at:
                             __kmalloc+0x47/0x310
                             pcpu_extend_area_map+0x2b/0xc0
                             pcpu_alloc+0x3ec/0x5e0
                             alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                             __do_tune_cpucache+0x2c/0x220
                             do_tune_cpucache+0x26/0xc0
                             enable_cpucache+0x6d/0xf0
                             __kmem_cache_create+0x1bf/0x390
                             create_cache+0xba/0x1b0
                             kmem_cache_create+0x1f8/0x2b0
                             ksm_init+0x6f/0x19d
                             do_one_initcall+0x50/0x1b0
                             kernel_init_freeable+0x201/0x289
                             kernel_init+0xa/0x100
                             ret_from_fork+0x3a/0x50
      INITIAL USE at:
                         __mutex_lock+0x4e/0x8c0
                         pcpu_alloc+0x1ac/0x5e0
                         alloc_kmem_cache_cpus.isra.70+0x25/0xa0
                         setup_cpu_cache+0x2f/0x1f0
                         __kmem_cache_create+0x1bf/0x390
                         create_boot_cache+0x8b/0xb1
                         kmem_cache_init+0xa1/0x19e
                         start_kernel+0x270/0x4cb
                         x86_64_start_kernel+0x127/0x134
                         secondary_startup_64+0xa5/0xb0
    }
    ... key      at: [<ffffffff821d8e70>] pcpu_alloc_mutex+0x70/0xa0
    ... acquired at:
   pcpu_alloc+0x1ac/0x5e0
   __percpu_counter_init+0x4e/0xb0
   btrfs_init_fs_root+0x99/0x1c0 [btrfs]
   btrfs_get_fs_root.part.54+0x5b/0x150 [btrfs]
   resolve_indirect_refs+0x130/0x830 [btrfs]
   find_parent_nodes+0x69e/0xff0 [btrfs]
   btrfs_find_all_roots_safe+0xa0/0x110 [btrfs]
   btrfs_find_all_roots+0x50/0x70 [btrfs]
   btrfs_qgroup_prepare_account_extents+0x53/0x90 [btrfs]
   btrfs_commit_transaction+0x3ce/0x9b0 [btrfs]
   transaction_kthread+0x176/0x1b0 [btrfs]
   kthread+0x102/0x140
   ret_from_fork+0x3a/0x50

  -> (&fs_info->commit_root_sem){++++..} ops: 1566382 {
     HARDIRQ-ON-W at:
                        down_write+0x3e/0xa0
                        cache_block_group+0x287/0x420 [btrfs]
                        find_free_extent+0x106c/0x12d0 [btrfs]
                        btrfs_reserve_extent+0xd8/0x170 [btrfs]
                        cow_file_range.isra.66+0x133/0x470 [btrfs]
                        run_delalloc_range+0x121/0x410 [btrfs]
                        writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
                        __extent_writepage+0x19a/0x360 [btrfs]
                        extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
                        extent_writepages+0x4d/0x60 [btrfs]
                        do_writepages+0x1a/0x70
                        __filemap_fdatawrite_range+0xa7/0xe0
                        btrfs_rename+0x5ee/0xdb0 [btrfs]
                        vfs_rename+0x52a/0x7e0
                        SyS_rename+0x351/0x3b0
                        do_syscall_64+0x79/0x1e0
                        entry_SYSCALL_64_after_hwframe+0x42/0xb7
     HARDIRQ-ON-R at:
                        down_read+0x35/0x90
                        caching_thread+0x57/0x560 [btrfs]
                        normal_work_helper+0x1c0/0x5e0 [btrfs]
                        process_one_work+0x1e0/0x5c0
                        worker_thread+0x44/0x390
                        kthread+0x102/0x140
                        ret_from_fork+0x3a/0x50
     SOFTIRQ-ON-W at:
                        down_write+0x3e/0xa0
                        cache_block_group+0x287/0x420 [btrfs]
                        find_free_extent+0x106c/0x12d0 [btrfs]
                        btrfs_reserve_extent+0xd8/0x170 [btrfs]
                        cow_file_range.isra.66+0x133/0x470 [btrfs]
                        run_delalloc_range+0x121/0x410 [btrfs]
                        writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
                        __extent_writepage+0x19a/0x360 [btrfs]
                        extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
                        extent_writepages+0x4d/0x60 [btrfs]
                        do_writepages+0x1a/0x70
                        __filemap_fdatawrite_range+0xa7/0xe0
                        btrfs_rename+0x5ee/0xdb0 [btrfs]
                        vfs_rename+0x52a/0x7e0
                        SyS_rename+0x351/0x3b0
                        do_syscall_64+0x79/0x1e0
                        entry_SYSCALL_64_after_hwframe+0x42/0xb7
     SOFTIRQ-ON-R at:
                        down_read+0x35/0x90
                        caching_thread+0x57/0x560 [btrfs]
                        normal_work_helper+0x1c0/0x5e0 [btrfs]
                        process_one_work+0x1e0/0x5c0
                        worker_thread+0x44/0x390
                        kthread+0x102/0x140
                        ret_from_fork+0x3a/0x50
     INITIAL USE at:
                       down_write+0x3e/0xa0
                       cache_block_group+0x287/0x420 [btrfs]
                       find_free_extent+0x106c/0x12d0 [btrfs]
                       btrfs_reserve_extent+0xd8/0x170 [btrfs]
                       cow_file_range.isra.66+0x133/0x470 [btrfs]
                       run_delalloc_range+0x121/0x410 [btrfs]
                       writepage_delalloc.isra.50+0xfe/0x180 [btrfs]
                       __extent_writepage+0x19a/0x360 [btrfs]
                       extent_write_cache_pages.constprop.56+0x249/0x3e0 [btrfs]
                       extent_writepages+0x4d/0x60 [btrfs]
                       do_writepages+0x1a/0x70
                       __filemap_fdatawrite_range+0xa7/0xe0
                       btrfs_rename+0x5ee/0xdb0 [btrfs]
                       vfs_rename+0x52a/0x7e0
                       SyS_rename+0x351/0x3b0
                       do_syscall_64+0x79/0x1e0
                       entry_SYSCALL_64_after_hwframe+0x42/0xb7
   }
   ... key      at: [<ffffffffc0729578>] __key.61970+0x0/0xfffffffffff9aa88 [btrfs]
   ... acquired at:
   cache_block_group+0x287/0x420 [btrfs]
   find_free_extent+0x106c/0x12d0 [btrfs]
   btrfs_reserve_extent+0xd8/0x170 [btrfs]
   btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
   btrfs_create_tree+0xbb/0x2a0 [btrfs]
   btrfs_create_uuid_tree+0x37/0x140 [btrfs]
   open_ctree+0x23c0/0x2660 [btrfs]
   btrfs_mount+0xd36/0xf90 [btrfs]
   mount_fs+0x3a/0x160
   vfs_kern_mount+0x66/0x150
   btrfs_mount+0x18c/0xf90 [btrfs]
   mount_fs+0x3a/0x160
   vfs_kern_mount+0x66/0x150
   do_mount+0x1c1/0xcc0
   SyS_mount+0x7e/0xd0
   do_syscall_64+0x79/0x1e0
   entry_SYSCALL_64_after_hwframe+0x42/0xb7

 -> (&found->groups_sem){++++..} ops: 2134587 {
    HARDIRQ-ON-W at:
                      down_write+0x3e/0xa0
                      __link_block_group+0x34/0x130 [btrfs]
                      btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
                      open_ctree+0x2054/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    HARDIRQ-ON-R at:
                      down_read+0x35/0x90
                      btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
                      open_ctree+0x207b/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    SOFTIRQ-ON-W at:
                      down_write+0x3e/0xa0
                      __link_block_group+0x34/0x130 [btrfs]
                      btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
                      open_ctree+0x2054/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    SOFTIRQ-ON-R at:
                      down_read+0x35/0x90
                      btrfs_calc_num_tolerated_disk_barrier_failures+0x113/0x1f0 [btrfs]
                      open_ctree+0x207b/0x2660 [btrfs]
                      btrfs_mount+0xd36/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      btrfs_mount+0x18c/0xf90 [btrfs]
                      mount_fs+0x3a/0x160
                      vfs_kern_mount+0x66/0x150
                      do_mount+0x1c1/0xcc0
                      SyS_mount+0x7e/0xd0
                      do_syscall_64+0x79/0x1e0
                      entry_SYSCALL_64_after_hwframe+0x42/0xb7
    INITIAL USE at:
                     down_write+0x3e/0xa0
                     __link_block_group+0x34/0x130 [btrfs]
                     btrfs_read_block_groups+0x33d/0x7b0 [btrfs]
                     open_ctree+0x2054/0x2660 [btrfs]
                     btrfs_mount+0xd36/0xf90 [btrfs]
                     mount_fs+0x3a/0x160
                     vfs_kern_mount+0x66/0x150
                     btrfs_mount+0x18c/0xf90 [btrfs]
                     mount_fs+0x3a/0x160
                     vfs_kern_mount+0x66/0x150
                     do_mount+0x1c1/0xcc0
                     SyS_mount+0x7e/0xd0
                     do_syscall_64+0x79/0x1e0
                     entry_SYSCALL_64_after_hwframe+0x42/0xb7
  }
  ... key      at: [<ffffffffc0729488>] __key.59101+0x0/0xfffffffffff9ab78 [btrfs]
  ... acquired at:
   find_free_extent+0xcb4/0x12d0 [btrfs]
   btrfs_reserve_extent+0xd8/0x170 [btrfs]
   btrfs_alloc_tree_block+0x12f/0x4c0 [btrfs]
   __btrfs_cow_block+0x110/0x5b0 [btrfs]
   btrfs_cow_block+0xd7/0x290 [btrfs]
   btrfs_search_slot+0x1f6/0x960 [btrfs]
   btrfs_lookup_inode+0x2a/0x90 [btrfs]
   __btrfs_update_delayed_inode+0x65/0x210 [btrfs]
   btrfs_commit_inode_delayed_inode+0x121/0x130 [btrfs]
   btrfs_evict_inode+0x3fe/0x6a0 [btrfs]
   evict+0xc4/0x190
   __dentry_kill+0xbf/0x170
   dput+0x2ae/0x2f0
   SyS_rename+0x2a6/0x3b0
   do_syscall_64+0x79/0x1e0
   entry_SYSCALL_64_after_hwframe+0x42/0xb7

-> (&delayed_node->mutex){+.+.-.} ops: 5580204 {
   HARDIRQ-ON-W at:
                    __mutex_lock+0x4e/0x8c0
                    btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
                    btrfs_update_inode+0x83/0x110 [btrfs]
                    btrfs_dirty_inode+0x62/0xe0 [btrfs]
                    touch_atime+0x8c/0xb0
                    do_generic_file_read+0x818/0xb10
                    __vfs_read+0xdc/0x150
                    vfs_read+0x8a/0x130
                    SyS_read+0x45/0xa0
                    do_syscall_64+0x79/0x1e0
                    entry_SYSCALL_64_after_hwframe+0x42/0xb7
   SOFTIRQ-ON-W at:
                    __mutex_lock+0x4e/0x8c0
                    btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
                    btrfs_update_inode+0x83/0x110 [btrfs]
                    btrfs_dirty_inode+0x62/0xe0 [btrfs]
                    touch_atime+0x8c/0xb0
                    do_generic_file_read+0x818/0xb10
                    __vfs_read+0xdc/0x150
                    vfs_read+0x8a/0x130
                    SyS_read+0x45/0xa0
                    do_syscall_64+0x79/0x1e0
                    entry_SYSCALL_64_after_hwframe+0x42/0xb7
   IN-RECLAIM_FS-W at:
                       __mutex_lock+0x4e/0x8c0
                       __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
                       btrfs_evict_inode+0x22c/0x6a0 [btrfs]
                       evict+0xc4/0x190
                       dispose_list+0x35/0x50
                       prune_icache_sb+0x42/0x50
                       super_cache_scan+0x139/0x190
                       shrink_slab+0x262/0x5b0
                       shrink_node+0x2eb/0x2f0
                       kswapd+0x2eb/0x890
                       kthread+0x102/0x140
                       ret_from_fork+0x3a/0x50
   INITIAL USE at:
                   __mutex_lock+0x4e/0x8c0
                   btrfs_delayed_update_inode+0x46/0x6e0 [btrfs]
                   btrfs_update_inode+0x83/0x110 [btrfs]
                   btrfs_dirty_inode+0x62/0xe0 [btrfs]
                   touch_atime+0x8c/0xb0
                   do_generic_file_read+0x818/0xb10
                   __vfs_read+0xdc/0x150
                   vfs_read+0x8a/0x130
                   SyS_read+0x45/0xa0
                   do_syscall_64+0x79/0x1e0
                   entry_SYSCALL_64_after_hwframe+0x42/0xb7
 }
 ... key      at: [<ffffffffc072d488>] __key.56935+0x0/0xfffffffffff96b78 [btrfs]
 ... acquired at:
   __lock_acquire+0x264/0x11c0
   lock_acquire+0xbd/0x1e0
   __mutex_lock+0x4e/0x8c0
   __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
   btrfs_evict_inode+0x22c/0x6a0 [btrfs]
   evict+0xc4/0x190
   dispose_list+0x35/0x50
   prune_icache_sb+0x42/0x50
   super_cache_scan+0x139/0x190
   shrink_slab+0x262/0x5b0
   shrink_node+0x2eb/0x2f0
   kswapd+0x2eb/0x890
   kthread+0x102/0x140
   ret_from_fork+0x3a/0x50

stack backtrace:
CPU: 1 PID: 50 Comm: kswapd0 Tainted: G        W        4.12.14-kvmsmall #8 SLE15 (unreleased)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
 dump_stack+0x78/0xb7
 print_irq_inversion_bug.part.38+0x19f/0x1aa
 check_usage_forwards+0x102/0x120
 ? ret_from_fork+0x3a/0x50
 ? check_usage_backwards+0x110/0x110
 mark_lock+0x16c/0x270
 __lock_acquire+0x264/0x11c0
 ? pagevec_lookup_entries+0x1a/0x30
 ? truncate_inode_pages_range+0x2b3/0x7f0
 lock_acquire+0xbd/0x1e0
 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 __mutex_lock+0x4e/0x8c0
 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 ? __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 ? btrfs_evict_inode+0x1f6/0x6a0 [btrfs]
 __btrfs_release_delayed_node+0x3a/0x1f0 [btrfs]
 btrfs_evict_inode+0x22c/0x6a0 [btrfs]
 evict+0xc4/0x190
 dispose_list+0x35/0x50
 prune_icache_sb+0x42/0x50
 super_cache_scan+0x139/0x190
 shrink_slab+0x262/0x5b0
 shrink_node+0x2eb/0x2f0
 kswapd+0x2eb/0x890
 kthread+0x102/0x140
 ? mem_cgroup_shrink_node+0x2c0/0x2c0
 ? kthread_create_on_node+0x40/0x40
 ret_from_fork+0x3a/0x50

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop optimal argument from find_live_mirror()
Anand Jain [Wed, 14 Mar 2018 08:29:13 +0000 (16:29 +0800)]
btrfs: drop optimal argument from find_live_mirror()

Drop optimal argument from the function find_live_mirror() as we can
deduce it in the function itself. Also rename optimal to
preferred_mirror.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop num argument from find_live_mirror()
Anand Jain [Wed, 14 Mar 2018 08:29:12 +0000 (16:29 +0800)]
btrfs: drop num argument from find_live_mirror()

Obtain the stripes info from the map directly and so no need
to pass it as an argument.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Drop fs_info parameter from __btrfs_run_delayed_refs
Nikolay Borisov [Thu, 15 Mar 2018 14:00:27 +0000 (16:00 +0200)]
btrfs: Drop fs_info parameter from __btrfs_run_delayed_refs

It's provided by transaction handle.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Drop fs_info parameter from btrfs_finish_extent_commit
Nikolay Borisov [Thu, 15 Mar 2018 14:00:26 +0000 (16:00 +0200)]
btrfs: Drop fs_info parameter from btrfs_finish_extent_commit

It's provided by the transaction handle.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Drop fs_info parameter from btrfs_qgroup_account_extents
Nikolay Borisov [Thu, 15 Mar 2018 14:00:25 +0000 (16:00 +0200)]
btrfs: Drop fs_info parameter from btrfs_qgroup_account_extents

It's provided by the transaction handle.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop fs_info parameter from btrfs_run_delayed_refs
Nikolay Borisov [Thu, 15 Mar 2018 15:27:37 +0000 (17:27 +0200)]
btrfs: drop fs_info parameter from btrfs_run_delayed_refs

It's provided by the transaction handle.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove unused flush var in shrink_delalloc
Nikolay Borisov [Thu, 15 Mar 2018 12:36:29 +0000 (14:36 +0200)]
btrfs: Remove unused flush var in shrink_delalloc

Added by 08e007d2e577 ("Btrfs: improve the noflush reservation") and
made redundant by 17024ad0a0fd ("Btrfs: fix early ENOSPC due to
delalloc").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove unused extent_root var from caching_thread
Nikolay Borisov [Thu, 15 Mar 2018 12:36:28 +0000 (14:36 +0200)]
btrfs: Remove unused extent_root var from caching_thread

Added by b4570aa994b8 ("btrfs: fix compiling with CONFIG_BTRFS_DEBUG
enabled.") and obsoleted by 2ff7e61e0d30 ("btrfs: take an fs_info
directly when the root is not used otherwise").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: remove max_active var from open_ctree
Nikolay Borisov [Thu, 15 Mar 2018 12:36:26 +0000 (14:36 +0200)]
btrfs: remove max_active var from open_ctree

Introduced by 5cdc7ad337fb ("btrfs: Replace fs_info->workers with
btrfs_workqueue.") but obsoleted by 2a4581983f90 ("btrfs: factor
btrfs_init_workqueues() out of open_ctree()").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove unused root var from relink_file_extents
Nikolay Borisov [Thu, 15 Mar 2018 12:36:25 +0000 (14:36 +0200)]
btrfs: Remove unused root var from relink_file_extents

Added in 38c227d87c49 ("Btrfs: snapshot-aware defrag") but subsequently
made redundant by 0b246afa62b0 ("btrfs: root->fs_info cleanup, add
fs_info convenience variables").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove unused tot_len var from lzo_decompress
Nikolay Borisov [Thu, 15 Mar 2018 12:36:24 +0000 (14:36 +0200)]
btrfs: Remove unused tot_len var from lzo_decompress

Added already unused in a6fa6fae40ec ("btrfs: Add lzo compression
support").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove unused length var from scrub_handle_errored_block
Nikolay Borisov [Thu, 15 Mar 2018 12:36:23 +0000 (14:36 +0200)]
btrfs: Remove unused length var from scrub_handle_errored_block

Added in b5d67f64f9bc ("Btrfs: change scrub to support big blocks") but
rendered redundant by be50a8ddaae1 ("Btrfs: Simplify
scrub_setup_recheck_block()'s argument").

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove unused op_key var from add_delayed_refs
Nikolay Borisov [Thu, 15 Mar 2018 12:36:22 +0000 (14:36 +0200)]
btrfs: Remove unused op_key var from add_delayed_refs

Added as part of 86d5f9944252 ("btrfs: convert prelimary reference
tracking to use rbtrees") but never used. tmp_op_key essentially
subsumed that variable.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: volumes: Remove the meaningless condition of minimal nr_devs when allocating...
Qu Wenruo [Wed, 31 Jan 2018 05:56:15 +0000 (13:56 +0800)]
btrfs: volumes: Remove the meaningless condition of minimal nr_devs when allocating a chunk

When checking the minimal nr_devs, there is one dead and meaningless
condition:

if (ndevs < devs_increment * sub_stripes || ndevs < devs_min) {
    ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

This condition is meaningless, @devs_increment has nothing to do with
@sub_stripes.

In fact, in btrfs_raid_array[], profile with sub_stripes larger than 1
(RAID10) already has the @devs_increment set to 2.
So no need to multiple it by @sub_stripes.

And above condition is also dead.
For RAID10, @devs_increment * @sub_stripes equals 4, which is also the
@devs_min of RAID10.
For other profiles, @sub_stripes is always 1, and since @ndevs is
rounded down to @devs_increment, the condition will always be true.

Remove the meaningless condition to make later reader wander less.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Document parameters of btrfs_reserve_extent
Nikolay Borisov [Tue, 13 Mar 2018 10:22:32 +0000 (12:22 +0200)]
btrfs: Document parameters of btrfs_reserve_extent

This function is the entry to the extent allocator and as such has
quite a number of parameters. Some of those have subtle effects on the
allocation algorithm. Document the parameters.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Handle error from btrfs_uuid_tree_rem call in _btrfs_ioctl_set_received_subvol
Nikolay Borisov [Mon, 12 Mar 2018 12:48:09 +0000 (14:48 +0200)]
btrfs: Handle error from btrfs_uuid_tree_rem call in _btrfs_ioctl_set_received_subvol

As with every function which deals with modifying the btree
btrfs_uuid_tree_rem can fail for any number of reasons (ie. EIO/ENOMEM).
Handle return error value from this function gracefully by aborting the
transaction.

Fixes: dd5f9615fc5c ("Btrfs: maintain subvolume items in the UUID tree")
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Use sizeof directly instead of a constant variable
Nikolay Borisov [Tue, 13 Mar 2018 08:26:06 +0000 (10:26 +0200)]
btrfs: Use sizeof directly instead of a constant variable

The kernel would like to have all stack VLA usage removed[1].
Unfortunately using an integer constant variable as the size of an
array is still considered a VLA. Instead let's use directly sizeof(var)
which removes the VLA usage. Use the occasion to remove csum_size
altogether and use sizeof() also for the size passed to memcmp

[1]: https://lkml.org/lkml/2018/3/7/621

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: rename submit callbacks and drop double underscores
David Sterba [Thu, 8 Mar 2018 13:35:48 +0000 (14:35 +0100)]
btrfs: rename submit callbacks and drop double underscores

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: remove unused parameters from extent_submit_bio_done_t
David Sterba [Thu, 8 Mar 2018 12:47:33 +0000 (13:47 +0100)]
btrfs: remove unused parameters from extent_submit_bio_done_t

Remove parameters not used by any of the callbacks.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: remove unused parameters from extent_submit_bio_start_t
David Sterba [Thu, 8 Mar 2018 12:47:33 +0000 (13:47 +0100)]
btrfs: remove unused parameters from extent_submit_bio_start_t

Remove parameters not used by any of the callbacks.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: separate types for submit_bio_start and submit_bio_done
David Sterba [Fri, 23 Jun 2017 01:05:23 +0000 (03:05 +0200)]
btrfs: separate types for submit_bio_start and submit_bio_done

The callbacks make use of different parameters that are passed to the
other type unnecessarily. This patch adds separate types for each and
the unused parameters will be removed.

The type extent_submit_bio_hook_t keeps all parameters and can be used
where the start/done types are not appropriate.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: kill tree_mod_log_set_root_pointer helper
David Sterba [Mon, 5 Mar 2018 15:35:29 +0000 (16:35 +0100)]
btrfs: kill tree_mod_log_set_root_pointer helper

A useless wrapper around tree_mod_log_insert_root that hides missing
error handling. Move it to the callers.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: kill tree_mod_log_set_node_key helper
David Sterba [Mon, 5 Mar 2018 15:16:54 +0000 (16:16 +0100)]
btrfs: kill tree_mod_log_set_node_key helper

A trivial wrapper that can be simply opencoded and makes the GFP
allocation request more visible. The error handling is now moved to the
callers.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: kill trivial wrapper tree_mod_log_eb_move
David Sterba [Mon, 5 Mar 2018 14:47:39 +0000 (15:47 +0100)]
btrfs: kill trivial wrapper tree_mod_log_eb_move

The wrapper is effectively an alias for tree_mod_log_insert_move but
also hides the missing error handling. To make that more visible, lift
the BUG_ON to the callers.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: remove trivial locking wrappers of tree mod log
David Sterba [Mon, 5 Mar 2018 14:43:41 +0000 (15:43 +0100)]
btrfs: remove trivial locking wrappers of tree mod log

The wrappers are trivial and do not bring any extra value on top of the
plain locking primitives.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop fs_info parameter from __tree_mod_log_oldest_root
David Sterba [Mon, 5 Mar 2018 14:33:18 +0000 (15:33 +0100)]
btrfs: drop fs_info parameter from __tree_mod_log_oldest_root

It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: embed tree_mod_move structure to tree_mod_elem
David Sterba [Mon, 5 Mar 2018 14:31:18 +0000 (15:31 +0100)]
btrfs: embed tree_mod_move structure to tree_mod_elem

The tree_mod_move is not used anywhere and can be embedded as anonymous
structure.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop unused fs_info parameter from tree_mod_log_eb_move
David Sterba [Mon, 5 Mar 2018 14:26:29 +0000 (15:26 +0100)]
btrfs: drop unused fs_info parameter from tree_mod_log_eb_move

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop fs_info parameter from tree_mod_log_free_eb
David Sterba [Mon, 5 Mar 2018 14:22:30 +0000 (15:22 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_free_eb

It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop fs_info parameter from tree_mod_log_free_eb
David Sterba [Mon, 5 Mar 2018 14:14:25 +0000 (15:14 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_free_eb

It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop fs_info parameter from tree_mod_log_insert_key
David Sterba [Mon, 5 Mar 2018 14:09:03 +0000 (15:09 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_insert_key

It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop fs_info parameter from tree_mod_log_insert_move
David Sterba [Mon, 5 Mar 2018 14:03:52 +0000 (15:03 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_insert_move

It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop fs_info parameter from tree_mod_log_set_node_key
David Sterba [Mon, 5 Mar 2018 14:00:37 +0000 (15:00 +0100)]
btrfs: drop fs_info parameter from tree_mod_log_set_node_key

It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: document more parameters of submit_extent_page
David Sterba [Mon, 12 Jun 2017 17:50:41 +0000 (19:50 +0200)]
btrfs: document more parameters of submit_extent_page

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: cleanup merging conditions in submit_extent_page
David Sterba [Mon, 12 Jun 2017 18:00:43 +0000 (20:00 +0200)]
btrfs: cleanup merging conditions in submit_extent_page

The merge call was factored out to a separate helper but it's a trivial
one and arguably we can opencode it and cache the value.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: remove redundant variable in __do_readpage
David Sterba [Tue, 6 Jun 2017 17:50:13 +0000 (19:50 +0200)]
btrfs: remove redundant variable in __do_readpage

The value of page_end is only stored to end, no other use.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: assume that bio_ret is always valid in submit_extent_page
David Sterba [Tue, 6 Jun 2017 17:22:55 +0000 (19:22 +0200)]
btrfs: assume that bio_ret is always valid in submit_extent_page

All callers pass a valid pointer so we can drop the redundant checks.
The call to submit_one_bio never happend and can be removed.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: scrub: batch rebuild for raid56
Liu Bo [Wed, 7 Mar 2018 19:08:09 +0000 (12:08 -0700)]
Btrfs: scrub: batch rebuild for raid56

In case of raid56, writes and rebuilds always take BTRFS_STRIPE_LEN(64K)
as unit, however, scrub_extent() sets blocksize as unit, so rebuild
process may be triggered on every block on a same stripe.

A typical example would be that when we're replacing a disappeared disk,
all reads on the disks get -EIO, every block (size is 4K if blocksize is
4K) would go thru these,

scrub_handle_errored_block
  scrub_recheck_block # re-read pages one by one
  scrub_recheck_block # rebuild by calling raid56_parity_recover()
                        page by page

Although with raid56 stripe cache most of reads during rebuild can be
avoided, the parity recover calculation(xor or raid6 algorithms) needs to
be done $(BTRFS_STRIPE_LEN / blocksize) times.

This makes it smarter by doing raid56 scrub/replace on stripe length.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: sort and group mount option definitions
David Sterba [Fri, 9 Mar 2018 13:37:01 +0000 (14:37 +0100)]
btrfs: sort and group mount option definitions

Sort mount options by the primary name, followed by the 'no-'
counterpart if it exists. Group the deprecated and debugging options.
Enum and token defintions are synced.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Add nossd_spread mount option
Howard McLauchlan [Thu, 8 Mar 2018 18:48:48 +0000 (10:48 -0800)]
btrfs: Add nossd_spread mount option

Btrfs has two mount options for SSD optimizations: ssd and ssd_spread.
Presently there is an option to disable all SSD optimizations, but there
isn't an option to disable just ssd_spread.

This patch adds a mount option nossd_spread that disables ssd_spread
only.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove btrfs_fs_info::open_ioctl_trans
Nikolay Borisov [Mon, 5 Feb 2018 08:41:16 +0000 (10:41 +0200)]
btrfs: Remove btrfs_fs_info::open_ioctl_trans

Since userspace transaction have been removed we no longer have use
for this field so delete it.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove code referencing unused TRANS_USERSPACE
Nikolay Borisov [Mon, 5 Feb 2018 08:41:15 +0000 (10:41 +0200)]
btrfs: Remove code referencing unused TRANS_USERSPACE

Now that the userspace transaction ioctls have been removed,
TRANS_USERSPACE is no longer used hence we can remove it.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove btrfs_file_private::trans
Nikolay Borisov [Mon, 5 Feb 2018 08:41:14 +0000 (10:41 +0200)]
btrfs: Remove btrfs_file_private::trans

Now that the userspace transaction IOCTL have been removed, this member
is no longer used so just remove it

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove userspace transaction ioctls
Nikolay Borisov [Mon, 5 Feb 2018 08:41:13 +0000 (10:41 +0200)]
btrfs: Remove userspace transaction ioctls

Commit 3558d4f88ec8 ("btrfs: Deprecate userspace transaction ioctls")
marked the beginning of the end of userspace transaction. This commit
finishes the job! There are no known users and ceph does not use the
ioctl anymore.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Sage Weil <sage@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: qgroup: Fix root item corruption when multiple same source snapshots are creat...
Qu Wenruo [Tue, 19 Dec 2017 07:44:54 +0000 (15:44 +0800)]
btrfs: qgroup: Fix root item corruption when multiple same source snapshots are created with quota enabled

When multiple pending snapshots referring to the same source subvolume
are executed, enabled quota will cause root item corruption, where root
items are using old bytenr (no backref in extent tree).

This can be triggered by fstests btrfs/152.

The cause is when source subvolume is still dirty, extra commit
(simplied transaction commit) of qgroup_account_snapshot() can skip
dirty roots not recorded in current transaction, making root item of
source subvolume not updated.

Fix it by forcing recording source subvolume in current transaction
before qgroup sub-transaction commit.

Reported-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Relax memory barrier in btrfs_tree_unlock
Nikolay Borisov [Wed, 14 Feb 2018 12:37:26 +0000 (14:37 +0200)]
btrfs: Relax memory barrier in btrfs_tree_unlock

When performing an unlock on an extent buffer we'd like to order the
decrement of extent_buffer::blocking_writers with waking up any
waiters. In such situations it's sufficient to use smp_mb__after_atomic
rather than the heavy smp_mb. On architectures where atomic operations
are fully ordered (such as x86 or s390) unconditionally executing
a heavyweight smp_mb instruction causes a severe hit to performance
while bringin no improvements in terms of correctness.

The better thing is to use the appropriate smp_mb__after_atomic routine
which will do the correct thing (invoke a full smp_mb or in the case
of ordered atomics insert a compiler barrier). Put another way,
an RMW atomic op + smp_load__after_atomic equals, in terms of
semantics, to a full smp_mb. This ensures that none of the problems
described in the accompanying comment of waitqueue_active occur.
No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: add define for oldest generation
Anand Jain [Wed, 7 Mar 2018 09:29:18 +0000 (17:29 +0800)]
btrfs: add define for oldest generation

Some functions can filter metadata by the generation. Add a define that
will annotate such arguments.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: open code trivial helper btrfs_page_exists_in_range
David Sterba [Wed, 7 Mar 2018 14:33:22 +0000 (15:33 +0100)]
btrfs: open code trivial helper btrfs_page_exists_in_range

The called function name is self explanatory.

Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Use filemap_range_has_page()
Matthew Wilcox [Tue, 6 Mar 2018 19:23:16 +0000 (11:23 -0800)]
btrfs: Use filemap_range_has_page()

The current implementation of btrfs_page_exists_in_range() gives the
wrong answer if the workingset code has stored a shadow entry in the
page cache.  The filemap_range_has_page() function does not have this
problem, and it's shared code, so use it instead.

eigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: dev-replace: make sure target is identical to source when raid56 rebuild fails
Liu Bo [Fri, 2 Mar 2018 23:10:41 +0000 (16:10 -0700)]
Btrfs: dev-replace: make sure target is identical to source when raid56 rebuild fails

In the last step of scrub_handle_error_block, we try to combine good
copies on all possible mirrors, this works fine for raid1 and raid10,
but not for raid56 as it's doing parity rebuild.

If parity rebuild doesn't get back with correct data which matches its
checksum, in case of replace we'd rather write what is stored in the
source device than the data calculuated from parity.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: raid56: remove redundant async_missing_raid56
Liu Bo [Fri, 2 Mar 2018 23:10:39 +0000 (16:10 -0700)]
Btrfs: raid56: remove redundant async_missing_raid56

async_missing_raid56() is identical to async_read_rebuild().

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: adjust return values of btrfs_inode_by_name
Su Yue [Mon, 5 Mar 2018 09:13:37 +0000 (17:13 +0800)]
btrfs: adjust return values of btrfs_inode_by_name

Previously, btrfs_inode_by_name() returned 0 which left caller to check
objectid of location even location if the type was invalid.

Let btrfs_inode_by_name() return -EUCLEAN if a corrupted location of a
dir entry is found.  Removal of label out_err also simplifies the
function.

Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ drop unlikely ]
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: rename btrfs_close_extra_device to btrfs_free_extra_devids
Anand Jain [Tue, 27 Feb 2018 04:41:59 +0000 (12:41 +0800)]
btrfs: rename btrfs_close_extra_device to btrfs_free_extra_devids

This function btrfs_close_extra_devices() is about freeing
extra devids which once it may have belonged to this filesystem.
So rename it and add the comment. The _devid suffix is
appropriate as this function won't handle devices which are
outside of the filesytem being mounted.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove root argument from cow_file_range_inline
Nikolay Borisov [Fri, 2 Mar 2018 07:43:15 +0000 (09:43 +0200)]
btrfs: Remove root argument from cow_file_range_inline

This argument is always set to the root of the inode, which is also
passed. So let's get a reference inside the function and simplify
the arg list.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: send: fix typo in TLV_PUT
Liu Bo [Sat, 3 Mar 2018 01:05:49 +0000 (18:05 -0700)]
Btrfs: send: fix typo in TLV_PUT

According to tlv_put()'s prototype, data and attrlen needs to be
exchanged in the macro, but seems all callers are already aware of
this misorder and are therefore not affected.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove root argument from btrfs_log_dentry_safe
Nikolay Borisov [Tue, 27 Feb 2018 15:37:18 +0000 (17:37 +0200)]
btrfs: Remove root argument from btrfs_log_dentry_safe

Now that nothing uses the root arg of btrfs_log_dentry_safe it can be
safely removed. No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove root arg from btrfs_log_inode_parent
Nikolay Borisov [Tue, 27 Feb 2018 15:37:17 +0000 (17:37 +0200)]
btrfs: Remove root arg from btrfs_log_inode_parent

btrfs_log_inode_parent is called from 2 places (btrfs_log_dentry_safe
and btrfs_log_new_name) both of which pass inode->root as the root
argument and the inode itself. Remove the redundant root argument and
get a reference to the root directly from the inode, also remove
redundant root != inode->root check from the same function. No
functional change.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove redundant comment from btrfs_search_forward
Nikolay Borisov [Tue, 27 Feb 2018 15:37:16 +0000 (17:37 +0200)]
btrfs: Remove redundant comment from btrfs_search_forward

This function always sets keep_locks to 1 and saves the old value of
keep_locks which is restored at the end. So there is no way it can be
called without keep_locks being set. Remove comment imposing redundant
requirement on callers.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: move btrfs_listxattr prototype to xattr.h
David Sterba [Tue, 27 Feb 2018 14:48:59 +0000 (15:48 +0100)]
btrfs: move btrfs_listxattr prototype to xattr.h

There's a proper header for xattr handlers.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: adjust return type of btrfs_getxattr
David Sterba [Tue, 27 Feb 2018 14:48:57 +0000 (15:48 +0100)]
btrfs: adjust return type of btrfs_getxattr

The xattr_handler::get prototype returns int, use it. The only ssize_t
exception is the per-inode listxattr handler.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop extern from function declarations
David Sterba [Tue, 27 Feb 2018 14:48:54 +0000 (15:48 +0100)]
btrfs: drop extern from function declarations

Extern for functions does not make any difference, there are only a few
so let's remove them before it's too late.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: drop underscores from exported xattr functions
David Sterba [Tue, 27 Feb 2018 14:48:52 +0000 (15:48 +0100)]
btrfs: drop underscores from exported xattr functions

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: send, do not issue unnecessary truncate operations
Filipe Manana [Tue, 6 Feb 2018 20:40:40 +0000 (20:40 +0000)]
Btrfs: send, do not issue unnecessary truncate operations

When send finishes processing an inode representing a regular file, it
always issues a truncate operation for that file, even if its size did
not change or the last write sets the file size correctly. In the most
common cases, the issued write operations set the file to correct size
(either full or incremental sends) or the file size did not change (for
incremental sends), so the only case where a truncate operation is needed
is when a file size becomes smaller in the send snapshot when compared
to the parent snapshot.

By not issuing unnecessary truncate operations we reduce the stream size
and save time in the receiver. Currently truncating a file to the same
size triggers writeback of its last page (if it's dirty) and waits for it
to complete (only if the file size is not aligned with the filesystem's
sector size). This is being fixed by another patch and is independent of
this change (that patch's title is "Btrfs: skip writeback of last page
when truncating file to same size").

The following script was used to measure time spent by a receiver without
this change applied, with this change applied, and without this change and
with the truncate fix applied (the fix to not make it start and wait for
writeback to complete).

  $ cat test_send.sh
  #!/bin/bash

  SRC_DEV=/dev/sdc
  DST_DEV=/dev/sdd
  SRC_MNT=/mnt/sdc
  DST_MNT=/mnt/sdd

  mkfs.btrfs -f $SRC_DEV >/dev/null
  mkfs.btrfs -f $DST_DEV >/dev/null
  mount $SRC_DEV $SRC_MNT
  mount $DST_DEV $DST_MNT

  echo "Creating source filesystem"
  for ((t = 0; t < 10; t++)); do
      (
          for ((i = 1; i <= 20000; i++)); do
              xfs_io -f -c "pwrite -S 0xab 0 5000" \
                  $SRC_MNT/file_$i > /dev/null
          done
      ) &
     worker_pids[$t]=$!
  done
  wait ${worker_pids[@]}

  echo "Creating and sending snapshot"
  btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
  /usr/bin/time -f "send took %e seconds"    \
         btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
  /usr/bin/time -f "receive took %e seconds" \
         btrfs receive -f $SRC_MNT/send_file $DST_MNT

  umount $SRC_MNT
  umount $DST_MNT

The results, which are averages for 5 runs for each case, were the
following:

* Without this change

average receive time was 26.49 seconds
standard deviation of 2.53 seconds

* Without this change and with the truncate fix

average receive time was 12.51 seconds
standard deviation of 0.32 seconds

* With this change and without the truncate fix

average receive time was 10.02 seconds
standard deviation of 1.11 seconds

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: skip writeback of last page when truncating file to same size
Filipe Manana [Tue, 6 Feb 2018 20:40:31 +0000 (20:40 +0000)]
Btrfs: skip writeback of last page when truncating file to same size

When we truncate a file to the same size and that size is not aligned
with the sector size, we end up triggering writeback (and wait for it to
complete) of the last page. This is unncessary as we can not have delayed
allocation beyond the inode's i_size and the goal of truncating a file
to its own size is to discard prealloc extents (allocated via the
fallocate(2) system call). Besides the unnecessary IO start and wait, it
also breaks the oppurtunity for larger contiguous extents on disk, as
before the last dirty page there might be other dirty pages.

This scenario is probably not very common in general, however it is
common for btrfs receive implementations because currently the send
stream always issues a truncate operation for each processed inode as
the last operation for that inode (this truncate operation is not
always needed and the send implementation will be addressed to avoid
them).

So improve this by not starting and waiting for writeback of the inode's
last page when we are truncating to exactly the same size.

The following script was used to quickly measure the time a receive
operation takes:

 $ cat test_send.sh
 #!/bin/bash

 SRC_DEV=/dev/sdc
 DST_DEV=/dev/sdd
 SRC_MNT=/mnt/sdc
 DST_MNT=/mnt/sdd

 mkfs.btrfs -f $SRC_DEV >/dev/null
 mkfs.btrfs -f $DST_DEV >/dev/null
 mount $SRC_DEV $SRC_MNT
 mount $DST_DEV $DST_MNT

 echo "Creating source filesystem"
 for ((t = 0; t < 10; t++)); do
     (
         for ((i = 1; i <= 20000; i++)); do
             xfs_io -f -c "pwrite -S 0xab 0 5000" \
                $SRC_MNT/file_$i > /dev/null
         done
     ) &
     worker_pids[$t]=$!
 done
 wait ${worker_pids[@]}

 echo "Creating and sending snapshot"
 btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null
 /usr/bin/time -f "send took %e seconds"    \
     btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1
 /usr/bin/time -f "receive took %e seconds" \
     btrfs receive -f $SRC_MNT/send_file $DST_MNT

 umount $SRC_MNT
 umount $DST_MNT

The results for 5 runs were the following:

* Without this change

average receive time was 26.49 seconds
standard deviation of 2.53 seconds

* With this change

average receive time was 12.51 seconds
standard deviation of 0.32 seconds

Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agoBtrfs: dev-replace: skip prealloc extents when copy nocow pages
Liu Bo [Wed, 28 Feb 2018 01:10:58 +0000 (18:10 -0700)]
Btrfs: dev-replace: skip prealloc extents when copy nocow pages

It doens't make sense to process prealloc extents as pages will be
filled with zero when reading prealloc extents.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: unify types for metadata_ratio and data_chunk_allocations
Anand Jain [Mon, 26 Feb 2018 08:46:05 +0000 (16:46 +0800)]
btrfs: unify types for metadata_ratio and data_chunk_allocations

We have btrfs_fs_info::data_chunk_allocations and
btrfs_fs_info::metadata_ratio declared as unsigned which would be
unsinged int and kernel style prefers unsigned int over bare unsigned.
So this patch changes them to u32.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: Remove redundant memory barriers around dio_private error status
Nikolay Borisov [Wed, 14 Feb 2018 08:53:36 +0000 (10:53 +0200)]
btrfs: Remove redundant memory barriers around dio_private error status

Using any kind of memory barriers around atomic operations which have
a return value is redundant, since those operations themselves are
fully ordered. atomic_t.txt states:

    - RMW operations that have a return value are fully ordered;

    Fully ordered primitives are ordered against everything prior and
    everything subsequent. Therefore a fully ordered primitive is like
    having an smp_mb() before and an smp_mb() after the primitive.

Given this let's replace the extra memory barriers with comments.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
3 years agobtrfs: remove assert in btrfs_init_dev_replace_tgtdev()
Anand Jain [Tue, 20 Feb 2018 14:50:36 +0000 (22:50 +0800)]
btrfs: remove assert in btrfs_init_dev_replace_tgtdev()

In the same function we just ran btrfs_alloc_device() which means the
btrfs_device::resized_list is sure to be empty and we are protected
with the btrfs_fs_info::volume_mutex.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>