Linus Torvalds [Mon, 2 Sep 2019 01:45:28 +0000 (18:45 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Pull networking fixes from David Miller:
1) Fix some length checks during OGM processing in batman-adv, from
Sven Eckelmann.
2) Fix regression that caused netfilter conntrack sysctls to not be
per-netns any more. From Florian Westphal.
3) Use after free in netpoll, from Feng Sun.
4) Guard destruction of pfifo_fast per-cpu qdisc stats with
qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed
in pfifo_fast_enqueue().
5) Fix memory leak in mld_del_delrec(), from Eric Dumazet.
6) Handle neigh events on internal ports correctly in nfp, from John
Hurley.
7) Clear SKB timestamp in NF flow table code so that it does not
confuse fq scheduler. From Florian Westphal.
8) taprio destroy can crash if it is invoked in a failure path of
taprio_init(), because the list head isn't setup properly yet and
the list del is unconditional. Perform the list add earlier to
address this. From Vladimir Oltean.
9) Make sure to reapply vlan filters on device up, in aquantia driver.
From Dmitry Bogdanov.
10) sgiseeq driver releases DMA memory using free_page() instead of
dma_free_attrs(). From Christophe JAILLET.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
net: seeq: Fix the function used to release some memory in an error handling path
enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions
net: bcmgenet: use ethtool_op_get_ts_info()
tc-testing: don't hardcode 'ip' in nsPlugin.py
net: dsa: microchip: add KSZ8563 compatibility string
dt-bindings: net: dsa: document additional Microchip KSZ8563 switch
net: aquantia: fix out of memory condition on rx side
net: aquantia: linkstate irq should be oneshot
net: aquantia: reapply vlan filters on up
net: aquantia: fix limit of vlan filters
net: aquantia: fix removal of vlan 0
net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte
taprio: Fix kernel panic in taprio_destroy
net: dsa: microchip: fill regmap_config name
rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2]
net: stmmac: dwmac-rk: Don't fail if phy regulator is absent
amd-xgbe: Fix error path in xgbe_mod_init()
netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder
mac80211: Correctly set noencrypt for PAE frames
...
Christophe JAILLET [Sat, 31 Aug 2019 07:17:51 +0000 (09:17 +0200)]
net: seeq: Fix the function used to release some memory in an error handling path
In commit
99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv"),
a call to 'get_zeroed_page()' has been turned into a call to
'dma_alloc_coherent()'. Only the remove function has been updated to turn
the corresponding 'free_page()' into 'dma_free_attrs()'.
The error hndling path of the probe function has not been updated.
Fix it now.
Rename the corresponding label to something more in line.
Fixes: 99cd149efe82 ("sgiseeq: replace use of dma_cache_wback_inv")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 1 Sep 2019 18:21:57 +0000 (11:21 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of fixes for x86:
- Fix the bogus detection of 32bit user mode for uretprobes which
caused corruption of the user return address resulting in
application crashes. In the uprobes handler in_ia32_syscall() is
obviously always returning false on a 64bit kernel. Use
user_64bit_mode() instead which works correctly.
- Prevent large page splitting when ftrace flips RW/RO on the kernel
text which caused iTLB performance issues. Ftrace wants to be
converted to text_poke() which avoids the problem, but for now
allow large page preservation in the static protections check when
the change request spawns a full large page.
- Prevent arch_dynirq_lower_bound() from returning 0 when the IOAPIC
is configured via device tree. In the device tree case the GSI 1:1
mapping is meaningless therefore the lower bound which protects the
GSI range on ACPI machines is irrelevant. Return the lower bound
which the core hands to the function instead of blindly returning 0
which causes the core to allocate the invalid virtual interupt
number 0 which in turn prevents all drivers from allocating and
requesting an interrupt.
- Remove the bogus initialization of LDR and DFR in the 32bit bigsmp
APIC driver. That uses physical destination mode where LDR/DFR are
ignored, but the initialization and the missing clear of LDR caused
the APIC to be left in a inconsistent state on kexec/reboot.
- Clear LDR when clearing the APIC registers so the APIC is in a well
defined state.
- Initialize variables proper in the find_trampoline_placement()
code.
- Silence GCC( build warning for the real mode part of the build"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/cpa: Prevent large page split when ftrace flips RW on kernel text
x86/build: Add -Wnoaddress-of-packed-member to REALMODE_CFLAGS, to silence GCC9 build warning
x86/boot/compressed/64: Fix missing initialization in find_trampoline_placement()
x86/apic: Include the LDR when clearing out APIC registers
x86/apic: Do not initialize LDR and DFR for bigsmp
uprobes/x86: Fix detection of 32-bit user mode
x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines
Linus Torvalds [Sun, 1 Sep 2019 18:09:42 +0000 (11:09 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Thomas Gleixner:
"Two fixes for perf x86 hardware implementations:
- Restrict the period on Nehalem machines to prevent perf from
hogging the CPU
- Prevent the AMD IBS driver from overwriting the hardwre controlled
and pre-seeded reserved bits (0-6) in the count register which
caused a sample bias for dispatched micro-ops"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/ibs: Fix sample bias for dispatched micro-ops
perf/x86/intel: Restrict period on Nehalem
Linus Torvalds [Sun, 1 Sep 2019 17:39:25 +0000 (10:39 -0700)]
Merge branch 'turbostat' of git://git./linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
"User-space turbostat (and x86_energy_perf_policy) patches.
They are primarily bug fixes from users"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number
tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL
tools/power turbostat: Fix caller parameter of get_tdp_amd()
tools/power turbostat: Fix CPU%C1 display value
tools/power turbostat: do not enforce 1ms
tools/power turbostat: read from pipes too
tools/power turbostat: Add Ice Lake NNPI support
tools/power turbostat: rename has_hsw_msrs()
tools/power turbostat: Fix Haswell Core systems
tools/power turbostat: add Jacobsville support
tools/power turbostat: fix buffer overrun
tools/power turbostat: fix file descriptor leaks
tools/power turbostat: fix leak of file descriptor on error return path
tools/power turbostat: Make interval calculation per thread to reduce jitter
tools/power turbostat: remove duplicate pc10 column
tools/power x86_energy_perf_policy: Fix argument parsing
tools/power: Fix typo in man page
tools/power/x86: Enable compiler optimisations and Fortify by default
tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2
Christophe JAILLET [Fri, 30 Aug 2019 20:23:12 +0000 (22:23 +0200)]
enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions
Call to 'pci_free_irq_vectors()' are missing both in the error handling
path of the probe function, and in the remove function.
Add them.
Fixes: 19971f5ea0ab ("enetc: add PTP clock driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ryan M. Collins [Fri, 30 Aug 2019 18:49:55 +0000 (14:49 -0400)]
net: bcmgenet: use ethtool_op_get_ts_info()
This change enables the use of SW timestamping on the Raspberry Pi 4.
bcmgenet's transmit function bcmgenet_xmit() implements software
timestamping. However the SOF_TIMESTAMPING_TX_SOFTWARE capability was
missing and only SOF_TIMESTAMPING_RX_SOFTWARE was announced. By using
ethtool_ops bcmgenet_ethtool_ops() as get_ts_info(), the
SOF_TIMESTAMPING_TX_SOFTWARE capability is announced.
Similar to commit
a8f5cb9e7991 ("smsc95xx: use ethtool_op_get_ts_info()")
Signed-off-by: Ryan M. Collins <rmc032@bucknell.edu>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Fri, 30 Aug 2019 16:51:47 +0000 (18:51 +0200)]
tc-testing: don't hardcode 'ip' in nsPlugin.py
the following tdc test fails on Fedora:
# ./tdc.py -e 2638
-- ns/SubPlugin.__init__
Test 2638: Add matchall and try to get it
-----> prepare stage *** Could not execute: "$TC qdisc add dev $DEV1 clsact"
-----> prepare stage *** Error message: "/bin/sh: ip: command not found"
returncode 127; expected [0]
-----> prepare stage *** Aborting test run.
Let nsPlugin.py use the 'IP' variable introduced with commit
92c1a19e2fb9
("tc-tests: added path to ip command in tdc"), so that the path to 'ip' is
correctly resolved to the value we have in tdc_config.py.
# ./tdc.py -e 2638
-- ns/SubPlugin.__init__
Test 2638: Add matchall and try to get it
All test results:
1..1
ok 1 2638 - Add matchall and try to get it
Fixes: 489ce2f42514 ("tc-testing: Restore original behaviour for namespaces in tdc")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 1 Sep 2019 06:36:37 +0000 (23:36 -0700)]
Merge branch 'net-dsa-microchip-add-KSZ8563-support'
Razvan Stefanescu says:
====================
net: dsa: microchip: add KSZ8563 support
This patchset adds compatibility string for the KSZ8563 switch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Razvan Stefanescu [Fri, 30 Aug 2019 07:52:02 +0000 (10:52 +0300)]
net: dsa: microchip: add KSZ8563 compatibility string
It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Razvan Stefanescu [Fri, 30 Aug 2019 07:52:01 +0000 (10:52 +0300)]
dt-bindings: net: dsa: document additional Microchip KSZ8563 switch
It is a 3-Port 10/100 Ethernet Switch with 1588v2 PTP.
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 1 Sep 2019 02:07:17 +0000 (19:07 -0700)]
Merge branch 'net-aquantia-fixes-on-vlan-filters-and-other-conditions'
Igor Russkikh says:
====================
net: aquantia: fixes on vlan filters and other conditions
Here is a set of various bug fixes related to vlan filter offload and
two other rare cases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 30 Aug 2019 12:08:38 +0000 (12:08 +0000)]
net: aquantia: fix out of memory condition on rx side
On embedded environments with hard memory limits it is a normal although
rare case when skb can't be allocated on rx part under high traffic.
In such OOM cases napi_complete_done() was not called.
So the napi object became in an invalid state like it is "scheduled".
Kernel do not re-schedules the poll of that napi object.
Consequently, kernel can not remove that object the system hangs on
`ifconfig down` waiting for a poll.
We are fixing this by gracefully closing napi poll routine with correct
invocation of napi_complete_done.
This was reproduced with artificially failing the allocation of skb to
simulate an "out of memory" error case and check that traffic does
not get stuck.
Fixes: 970a2e9864b0 ("net: ethernet: aquantia: Vector operations")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Igor Russkikh [Fri, 30 Aug 2019 12:08:36 +0000 (12:08 +0000)]
net: aquantia: linkstate irq should be oneshot
Declaring threaded irq handler should also indicate the irq is
oneshot. It is oneshot indeed, because HW implements irq automasking
on trigger.
Not declaring this causes some kernel configurations to fail
on interface up, because request_threaded_irq returned an err code.
The issue was originally hidden on normal x86_64 configuration with
latest kernel, because depending on interrupt controller, irq driver
added ONESHOT flag on its own.
Issue was observed on older kernels (4.14) where no such logic exists.
Fixes: 4c83f170b3ac ("net: aquantia: link status irq handling")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Reported-by: Michael Symolkin <Michael.Symolkin@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 30 Aug 2019 12:08:35 +0000 (12:08 +0000)]
net: aquantia: reapply vlan filters on up
In case of device reconfiguration the driver may reset the device invisible
for other modules, vlan module in particular. So vlans will not be
removed&created and vlan filters will not be configured in the device.
The patch reapplies the vlan filters at device start.
Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 30 Aug 2019 12:08:33 +0000 (12:08 +0000)]
net: aquantia: fix limit of vlan filters
Fix a limit condition of vlans on the interface before setting vlan
promiscuous mode
Fixes: 48dd73d08d4dd ("net: aquantia: fix vlans not working over bridged network")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bogdanov [Fri, 30 Aug 2019 12:08:30 +0000 (12:08 +0000)]
net: aquantia: fix removal of vlan 0
Due to absence of checking against the rx flow rule when vlan 0 is being
removed, the other rule could be removed instead of the rule with vlan 0
Fixes: 7975d2aff5afb ("net: aquantia: add support of rx-vlan-filter offload")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 1 Sep 2019 01:45:35 +0000 (18:45 -0700)]
Merge branch 'Fix-issues-in-tc-taprio-and-tc-cbs'
Vladimir Oltean says:
====================
Fix issues in tc-taprio and tc-cbs
This series fixes one panic and one WARN_ON found in the tc-taprio
qdisc, while trying to apply it:
- On an interface which is not multi-queue
- On an interface which has no carrier
The tc-cbs was also visually found to suffer of the same issue as
tc-taprio, and the fix was only compile-tested in that case.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 30 Aug 2019 01:07:23 +0000 (04:07 +0300)]
net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate
The discussion to be made is absolutely the same as in the case of
previous patch ("taprio: Set default link speed to 10 Mbps in
taprio_set_picos_per_byte"). Nothing is lost when setting a default.
Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation")
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 30 Aug 2019 01:07:22 +0000 (04:07 +0300)]
taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte
The taprio budget needs to be adapted at runtime according to interface
link speed. But that handling is problematic.
For one thing, installing a qdisc on an interface that doesn't have
carrier is not illegal. But taprio prints the following stack trace:
[ 31.851373] ------------[ cut here ]------------
[ 31.856024] WARNING: CPU: 1 PID: 207 at net/sched/sch_taprio.c:481 taprio_dequeue+0x1a8/0x2d4
[ 31.864566] taprio: dequeue() called with unknown picos per byte.
[ 31.864570] Modules linked in:
[ 31.873701] CPU: 1 PID: 207 Comm: tc Not tainted
5.3.0-rc5-01199-g8838fe023cd6 #1689
[ 31.881398] Hardware name: Freescale LS1021A
[ 31.885661] [<
c03133a4>] (unwind_backtrace) from [<
c030d8cc>] (show_stack+0x10/0x14)
[ 31.893368] [<
c030d8cc>] (show_stack) from [<
c10ac958>] (dump_stack+0xb4/0xc8)
[ 31.900555] [<
c10ac958>] (dump_stack) from [<
c0349d04>] (__warn+0xe0/0xf8)
[ 31.907395] [<
c0349d04>] (__warn) from [<
c0349d64>] (warn_slowpath_fmt+0x48/0x6c)
[ 31.914841] [<
c0349d64>] (warn_slowpath_fmt) from [<
c0f38db4>] (taprio_dequeue+0x1a8/0x2d4)
[ 31.923150] [<
c0f38db4>] (taprio_dequeue) from [<
c0f227b0>] (__qdisc_run+0x90/0x61c)
[ 31.930856] [<
c0f227b0>] (__qdisc_run) from [<
c0ec82ac>] (net_tx_action+0x12c/0x2bc)
[ 31.938560] [<
c0ec82ac>] (net_tx_action) from [<
c0302298>] (__do_softirq+0x130/0x3c8)
[ 31.946350] [<
c0302298>] (__do_softirq) from [<
c03502a0>] (irq_exit+0xbc/0xd8)
[ 31.953536] [<
c03502a0>] (irq_exit) from [<
c03a4808>] (__handle_domain_irq+0x60/0xb4)
[ 31.961328] [<
c03a4808>] (__handle_domain_irq) from [<
c0754478>] (gic_handle_irq+0x58/0x9c)
[ 31.969638] [<
c0754478>] (gic_handle_irq) from [<
c0301a8c>] (__irq_svc+0x6c/0x90)
[ 31.977076] Exception stack(0xe8167b20 to 0xe8167b68)
[ 31.982100] 7b20:
e9d4bd80 00000cc0 000000cf 00000000 e9d4bd80 c1f38958 00000cc0 c1f38960
[ 31.990234] 7b40:
00000001 000000cf 00000004 e9dc0800 00000000 e8167b70 c0f478ec c0f46d94
[ 31.998363] 7b60:
60070013 ffffffff
[ 32.001833] [<
c0301a8c>] (__irq_svc) from [<
c0f46d94>] (netlink_trim+0x18/0xd8)
[ 32.009104] [<
c0f46d94>] (netlink_trim) from [<
c0f478ec>] (netlink_broadcast_filtered+0x34/0x414)
[ 32.017930] [<
c0f478ec>] (netlink_broadcast_filtered) from [<
c0f47cec>] (netlink_broadcast+0x20/0x28)
[ 32.027102] [<
c0f47cec>] (netlink_broadcast) from [<
c0eea378>] (rtnetlink_send+0x34/0x88)
[ 32.035238] [<
c0eea378>] (rtnetlink_send) from [<
c0f25890>] (notify_and_destroy+0x2c/0x44)
[ 32.043461] [<
c0f25890>] (notify_and_destroy) from [<
c0f25e08>] (qdisc_graft+0x398/0x470)
[ 32.051595] [<
c0f25e08>] (qdisc_graft) from [<
c0f27a00>] (tc_modify_qdisc+0x3a4/0x724)
[ 32.059470] [<
c0f27a00>] (tc_modify_qdisc) from [<
c0ee4c84>] (rtnetlink_rcv_msg+0x260/0x2ec)
[ 32.067864] [<
c0ee4c84>] (rtnetlink_rcv_msg) from [<
c0f4a988>] (netlink_rcv_skb+0xb8/0x110)
[ 32.076172] [<
c0f4a988>] (netlink_rcv_skb) from [<
c0f4a170>] (netlink_unicast+0x1b4/0x22c)
[ 32.084392] [<
c0f4a170>] (netlink_unicast) from [<
c0f4a5e4>] (netlink_sendmsg+0x33c/0x380)
[ 32.092614] [<
c0f4a5e4>] (netlink_sendmsg) from [<
c0ea9f40>] (sock_sendmsg+0x14/0x24)
[ 32.100403] [<
c0ea9f40>] (sock_sendmsg) from [<
c0eaa780>] (___sys_sendmsg+0x214/0x228)
[ 32.108279] [<
c0eaa780>] (___sys_sendmsg) from [<
c0eabad0>] (__sys_sendmsg+0x50/0x8c)
[ 32.116068] [<
c0eabad0>] (__sys_sendmsg) from [<
c0301000>] (ret_fast_syscall+0x0/0x54)
[ 32.123938] Exception stack(0xe8167fa8 to 0xe8167ff0)
[ 32.128960] 7fa0:
b6fa68c8 000000f8 00000003 bea142d0 00000000 00000000
[ 32.137093] 7fc0:
b6fa68c8 000000f8 0052154c 00000128 5d6468a2 00000000 00000028 00558c9c
[ 32.145224] 7fe0:
00000070 bea14278 00530d64 b6e17e64
[ 32.150659] ---[ end trace
2139c9827c3e5177 ]---
This happens because the qdisc ->dequeue callback gets called. Which
again is not illegal, the qdisc will dequeue even when the interface is
up but doesn't have carrier (and hence SPEED_UNKNOWN), and the frames
will be dropped further down the stack in dev_direct_xmit().
And, at the end of the day, for what? For calculating the initial budget
of an interface which is non-operational at the moment and where frames
will get dropped anyway.
So if we can't figure out the link speed, default to SPEED_10 and move
along. We can also remove the runtime check now.
Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation")
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Fri, 30 Aug 2019 01:07:21 +0000 (04:07 +0300)]
taprio: Fix kernel panic in taprio_destroy
taprio_init may fail earlier than this line:
list_add(&q->taprio_list, &taprio_list);
i.e. due to the net device not being multi queue.
Attempting to remove q from the global taprio_list when it is not part
of it will result in a kernel panic.
Fix it by matching list_add and list_del better to one another in the
order of operations. This way we can keep the deletion unconditional
and with lower complexity - O(1).
Cc: Leandro Dorileo <leandro.maciel.dorileo@intel.com>
Fixes: 7b9eba7ba0c1 ("net/sched: taprio: fix picos_per_byte miscalculation")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
George McCollister [Thu, 29 Aug 2019 14:14:41 +0000 (09:14 -0500)]
net: dsa: microchip: fill regmap_config name
Use the register value width as the regmap_config name to prevent the
following error when the second and third regmap_configs are
initialized.
"debugfs: Directory '${bus-id}' with parent 'regmap' already present!"
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 31 Aug 2019 20:16:07 +0000 (13:16 -0700)]
Merge tag 'batadv-net-for-davem-
20190830' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are two batman-adv bugfixes:
- Fix OGM and OGMv2 header read boundary check,
by Sven Eckelmann (2 patches)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Len Brown [Sat, 31 Aug 2019 18:40:39 +0000 (14:40 -0400)]
tools/power turbostat: update version number
Today is 19.08.31, at least in some parts of the world.
Signed-off-by: Len Brown <len.brown@intel.com>
Pu Wen [Sat, 31 Aug 2019 02:20:31 +0000 (10:20 +0800)]
tools/power turbostat: Add support for Hygon Fam 18h (Dhyana) RAPL
Commit
9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD
Fam 17h (Zen) RAPL") and the commit
3316f99a9f1b68c578c5 ("tools/power
turbostat: Also read package power on AMD F17h (Zen)") add AMD Fam 17h
RAPL support.
Hygon Family 18h(Dhyana) support RAPL in bit 14 of CPUID 0x80000007 EDX,
and has MSRs RAPL_PWR_UNIT/CORE_ENERGY_STAT/PKG_ENERGY_STAT. So add Hygon
Dhyana Family 18h support for RAPL.
Already tested on Hygon multi-node systems and it shows correct per-core
energy usage and the total package power.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
Pu Wen [Sat, 31 Aug 2019 02:19:58 +0000 (10:19 +0800)]
tools/power turbostat: Fix caller parameter of get_tdp_amd()
Commit
9392bd98bba760be96ee ("tools/power turbostat: Add support for AMD
Fam 17h (Zen) RAPL") add a function get_tdp_amd(), the parameter is CPU
family. But the rapl_probe_amd() function use wrong model parameter.
Fix the wrong caller parameter of get_tdp_amd() to use family.
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Pu Wen <puwen@hygon.cn>
Reviewed-by: Calvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: Len Brown <len.brown@intel.com>
Srinivas Pandruvada [Tue, 27 Aug 2019 17:57:14 +0000 (10:57 -0700)]
tools/power turbostat: Fix CPU%C1 display value
In some case C1% will be wrong value, when platform doesn't have MSR for
C1 residency.
For example:
Core CPU CPU%c1
- - 100.00
0 0 100.00
0 2 100.00
1 1 100.00
1 3 100.00
But adding Busy% will fix this
Core CPU Busy% CPU%c1
- - 99.77 0.23
0 0 99.77 0.23
0 2 99.77 0.23
1 1 99.77 0.23
1 3 99.77 0.23
This issue can be reproduced on most of the recent systems including
Broadwell, Skylake and later.
This is because if we don't select Busy% or Avg_MHz or Bzy_MHz then
mperf value will not be read from MSR, so it will be 0. But this
is required for C1% calculation when MSR for C1 residency is not present.
Same is true for C3, C6 and C7 column selection.
So add another define DO_BIC_READ(), which doesn't depend on user
column selection and use for mperf, C3, C6 and C7 related counters.
So when there is no platform support for C1 residency counters,
we still read these counters, if the CPU has support and user selected
display of CPU%c1.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Artem Bityutskiy [Wed, 14 Aug 2019 17:12:56 +0000 (20:12 +0300)]
tools/power turbostat: do not enforce 1ms
Turbostat works by taking a snapshot of counters, sleeping, taking another
snapshot, calculating deltas, and printing out the table.
The sleep time is controlled via -i option or by user sending a signal or a
character to stdin. In the latter case, turbostat always adds 1 ms
sleep before it reads the counters, in order to avoid larger imprecisions
in the results in prints.
While the 1 ms delay may be a good idea for a "dumb" user, it is a
problem for an "aware" user. I do thousands and thousands of measurements
over a short period of time (like 2ms), and turbostat unconditionally adds
a 1ms to my interval, so I cannot get what I really need.
This patch removes the unconditional 1ms sleep. This is an expert user
tool, after all, and non-experts will unlikely ever use it in the non-fixed
interval mode anyway, so I think it is OK to remove the 1ms delay.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Artem Bityutskiy [Wed, 14 Aug 2019 17:12:55 +0000 (20:12 +0300)]
tools/power turbostat: read from pipes too
Commit '
47936f944e78 tools/power turbostat: fix printing on input' make
a valid fix, but it completely disabled piped stdin support, which is
a valuable use-case. Indeed, if stdin is a pipe, turbostat won't read
anything from it, so it becomes impossible to get turbostat output at
user-defined moments, instead of the regular intervals.
There is no reason why this should works for terminals, but not for
pipes. This patch improves the situation. Instead of ignoring pipes, we
read data from them but gracefully handle the EOF case.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Rajneesh Bhardwaj [Fri, 14 Jun 2019 07:39:46 +0000 (13:09 +0530)]
tools/power turbostat: Add Ice Lake NNPI support
This enables turbostat utility on Ice Lake NNPI SoC.
Link: https://lkml.org/lkml/2019/6/5/1034
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sat, 31 Aug 2019 18:16:07 +0000 (14:16 -0400)]
tools/power turbostat: rename has_hsw_msrs()
Perhaps if this more descriptive name had been used,
then we wouldn't have had the HSW ULT vs HSW CORE bug,
fixed by the previous commit.
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sat, 31 Aug 2019 18:09:29 +0000 (14:09 -0400)]
tools/power turbostat: Fix Haswell Core systems
turbostat: cpu0: msr offset 0x630 read failed: Input/output error
because Haswell Core does not have C8-C10.
Output C8-C10 only on Haswell ULT.
Fixes: f5a4c76ad7de ("tools/power turbostat: consolidate duplicate model numbers")
Reported-by: Prarit Bhargava <prarit@redhat.com>
Suggested-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Zhang Rui [Sun, 21 Apr 2019 08:30:22 +0000 (16:30 +0800)]
tools/power turbostat: add Jacobsville support
Jacobsville behaves like Denverton.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Naoya Horiguchi [Wed, 3 Apr 2019 07:02:14 +0000 (16:02 +0900)]
tools/power turbostat: fix buffer overrun
turbostat could be terminated by general protection fault on some latest
hardwares which (for example) support 9 levels of C-states and show 18
"tADDED" lines. That bloats the total output and finally causes buffer
overrun. So let's extend the buffer to avoid this.
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Gustavo A. R. Silva [Mon, 8 Apr 2019 16:12:40 +0000 (11:12 -0500)]
tools/power turbostat: fix file descriptor leaks
Fix file descriptor leaks by closing fp before return.
Addresses-Coverity-ID:
1444591 ("Resource leak")
Addresses-Coverity-ID:
1444592 ("Resource leak")
Fixes: 5ea7647b333f ("tools/power turbostat: Warn on bad ACPI LPIT data")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Colin Ian King [Mon, 8 Apr 2019 09:00:44 +0000 (10:00 +0100)]
tools/power turbostat: fix leak of file descriptor on error return path
Currently the error return path does not close the file fp and leaks
a file descriptor. Fix this by closing the file.
Fixes: 5ea7647b333f ("tools/power turbostat: Warn on bad ACPI LPIT data")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Yazen Ghannam [Mon, 25 Mar 2019 17:32:42 +0000 (17:32 +0000)]
tools/power turbostat: Make interval calculation per thread to reduce jitter
Turbostat currently normalizes TSC and other values by dividing by an
interval. This interval is the delta between the start of one global
(all counters on all CPUs) sampling and the start of another. However,
this introduces a lot of jitter into the data.
In order to reduce jitter, the interval calculation should be based on
timestamps taken per thread and close to the start of the thread's
sampling.
Define a per thread time value to hold the delta between samples taken
on the thread.
Use the timestamp taken at the beginning of sampling to calculate the
delta.
Move the thread's beginning timestamp to after the CPU migration to
avoid jitter due to the migration.
Use the global time delta for the average time delta.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Len Brown [Sat, 31 Aug 2019 16:30:24 +0000 (12:30 -0400)]
tools/power turbostat: remove duplicate pc10 column
Remove the duplicate pc10 column.
Fixes: be0e54c4ebbf ("turbostat: Build-in "Low Power Idle" counters support")
Reported-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Zephaniah E. Loss-Cutler-Hull [Sat, 9 Feb 2019 13:25:48 +0000 (05:25 -0800)]
tools/power x86_energy_perf_policy: Fix argument parsing
The -w argument in x86_energy_perf_policy currently triggers an
unconditional segfault.
This is because the argument string reads: "+a:c:dD:E:e:f:m:M:rt:u:vw" and
yet the argument handler expects an argument.
When parse_optarg_string is called with a null argument, we then proceed to
crash in strncmp, not horribly friendly.
The man page describes -w as taking an argument, the long form
(--hwp-window) is correctly marked as taking a required argument, and the
code expects it.
As such, this patch simply marks the short form (-w) as requiring an
argument.
Signed-off-by: Zephaniah E. Loss-Cutler-Hull <zephaniah@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Matt Lupfer [Thu, 20 Sep 2018 14:31:44 +0000 (10:31 -0400)]
tools/power: Fix typo in man page
From context, we mean EPB (Enegry Performance Bias).
Signed-off-by: Matt Lupfer <mlupfer@ddn.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Ben Hutchings [Sun, 16 Sep 2018 15:06:10 +0000 (16:06 +0100)]
tools/power/x86: Enable compiler optimisations and Fortify by default
Compiling without optimisations is silly, especially since some
warnings depend on the optimiser. Use -O2.
Fortify adds warnings for unchecked I/O (among other things), which
seems to be a good idea for user-space code. Enable that too.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Ben Hutchings [Sun, 16 Sep 2018 15:05:53 +0000 (16:05 +0100)]
tools/power x86_energy_perf_policy: Fix "uninitialized variable" warnings at -O2
x86_energy_perf_policy first uses __get_cpuid() to check the maximum
CPUID level and exits if it is too low. It then assumes that later
calls will succeed (which I think is architecturally guaranteed). It
also assumes that CPUID works at all (which is not guaranteed on
x86_32).
If optimisations are enabled, gcc warns about potentially
uninitialized variables. Fix this by adding an exit-on-error after
every call to __get_cpuid() instead of just checking the maximum
level.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Len Brown <len.brown@intel.com>
Linus Torvalds [Sat, 31 Aug 2019 17:27:42 +0000 (10:27 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has a bunch of driver fixes and a core improvement to make the
on-going API transition more robust"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mediatek: disable zero-length transfers for mt8183
i2c: iproc: Stop advertising support of SMBUS quick cmd
MAINTAINERS: i2c mv64xxx: Update documentation path
i2c: piix4: Fix port selection for AMD Family 16h Model 30h
i2c: designware: Synchronize IRQs when unregistering slave client
i2c: i801: Avoid memory leak in check_acpi_smo88xx_device()
i2c: make i2c_unregister_device() ERR_PTR safe
Linus Torvalds [Sat, 31 Aug 2019 16:15:25 +0000 (09:15 -0700)]
Merge tag 'trace-v5.3-rc6' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Small fixes and minor cleanups for tracing:
- Make exported ftrace function not static
- Fix NULL pointer dereference in reading probes as they are created
- Fix NULL pointer dereference in k/uprobe clean up path
- Various documentation fixes"
* tag 'trace-v5.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Correct kdoc formats
ftrace/x86: Remove mcount() declaration
tracing/probe: Fix null pointer dereference
tracing: Make exported ftrace_set_clr_event non-static
ftrace: Check for successful allocation of hash
ftrace: Check for empty hash and comment the race with registering probes
ftrace: Fix NULL pointer dereference in t_probe_next()
Linus Torvalds [Sat, 31 Aug 2019 16:02:36 +0000 (09:02 -0700)]
Merge tag 'riscv/for-v5.3-rc7' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fix from Paul Walmsley:
"One significant fix for 32-bit RISC-V systems:
Fix the RV32 memory map to prevent userspace from corrupting the
FIXMAP area. Without this patch, the system can crash very early
during the boot"
* tag 'riscv/for-v5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix FIXMAP area corruption on RV32 systems
Linus Torvalds [Sat, 31 Aug 2019 15:51:48 +0000 (08:51 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"PPC:
- Fix bug which could leave locks held in the host on return to a
guest.
x86:
- Prevent infinitely looping emulation of a failing syscall while
single stepping.
- Do not crash the host when nesting is disabled"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Don't update RIP or do single-step on faulting emulation
KVM: x86: hyper-v: don't crash on KVM_GET_SUPPORTED_HV_CPUID when kvm_intel.nested is disabled
KVM: PPC: Book3S: Fix incorrect guest-to-user-translation error handling
Linus Torvalds [Sat, 31 Aug 2019 15:31:48 +0000 (08:31 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc mm fixes from Andrew Morton:
"7 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: memcontrol: fix percpu vmstats and vmevents flush
mm, memcg: do not set reclaim_state on soft limit reclaim
mailmap: add aliases for Dmitry Safonov
mm/z3fold.c: fix lock/unlock imbalance in z3fold_page_isolate
mm, memcg: partially revert "mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones"
mm/zsmalloc.c: fix build when CONFIG_COMPACTION=n
mm: memcontrol: flush percpu slab vmstats on kmem offlining
Jakub Kicinski [Wed, 28 Aug 2019 05:25:47 +0000 (22:25 -0700)]
tracing: Correct kdoc formats
Fix the following kdoc warnings:
kernel/trace/trace.c:1579: warning: Function parameter or member 'tr' not described in 'update_max_tr_single'
kernel/trace/trace.c:1579: warning: Function parameter or member 'tsk' not described in 'update_max_tr_single'
kernel/trace/trace.c:1579: warning: Function parameter or member 'cpu' not described in 'update_max_tr_single'
kernel/trace/trace.c:1776: warning: Function parameter or member 'type' not described in 'register_tracer'
kernel/trace/trace.c:2239: warning: Function parameter or member 'task' not described in 'tracing_record_taskinfo'
kernel/trace/trace.c:2239: warning: Function parameter or member 'flags' not described in 'tracing_record_taskinfo'
kernel/trace/trace.c:2269: warning: Function parameter or member 'prev' not described in 'tracing_record_taskinfo_sched_switch'
kernel/trace/trace.c:2269: warning: Function parameter or member 'next' not described in 'tracing_record_taskinfo_sched_switch'
kernel/trace/trace.c:2269: warning: Function parameter or member 'flags' not described in 'tracing_record_taskinfo_sched_switch'
kernel/trace/trace.c:3078: warning: Function parameter or member 'ip' not described in 'trace_vbprintk'
kernel/trace/trace.c:3078: warning: Function parameter or member 'fmt' not described in 'trace_vbprintk'
kernel/trace/trace.c:3078: warning: Function parameter or member 'args' not described in 'trace_vbprintk'
Link: http://lkml.kernel.org/r/20190828052549.2472-2-jakub.kicinski@netronome.com
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Jisheng Zhang [Mon, 26 Aug 2019 09:13:12 +0000 (09:13 +0000)]
ftrace/x86: Remove mcount() declaration
Commit
562e14f72292 ("ftrace/x86: Remove mcount support") removed the
support for using mcount, so we could remove the mcount() declaration
to clean up.
Link: http://lkml.kernel.org/r/20190826170150.10f101ba@xhacker.debian
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Xinpeng Liu [Wed, 7 Aug 2019 23:29:23 +0000 (07:29 +0800)]
tracing/probe: Fix null pointer dereference
BUG: KASAN: null-ptr-deref in trace_probe_cleanup+0x8d/0xd0
Read of size 8 at addr
0000000000000000 by task syz-executor.0/9746
trace_probe_cleanup+0x8d/0xd0
free_trace_kprobe.part.14+0x15/0x50
alloc_trace_kprobe+0x23e/0x250
Link: http://lkml.kernel.org/r/1565220563-980-1-git-send-email-danielliu861@gmail.com
Fixes: e3dc9f898ef9c ("tracing/probe: Add trace_event_call accesses APIs")
Signed-off-by: Xinpeng Liu <danielliu861@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Denis Efremov [Thu, 4 Jul 2019 17:21:10 +0000 (20:21 +0300)]
tracing: Make exported ftrace_set_clr_event non-static
The function ftrace_set_clr_event is declared static and marked
EXPORT_SYMBOL_GPL(), which is at best an odd combination. Because the
function was decided to be a part of API, this commit removes the static
attribute and adds the declaration to the header.
Link: http://lkml.kernel.org/r/20190704172110.27041-1-efremov@linux.com
Fixes: f45d1225adb04 ("tracing: Kernel access to Ftrace instances")
Reviewed-by: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Sat, 31 Aug 2019 01:56:08 +0000 (18:56 -0700)]
Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a potential crash in the ccp driver"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Ignore unconfigured CCP device on suspend/resume
Linus Torvalds [Sat, 31 Aug 2019 01:47:15 +0000 (18:47 -0700)]
Partially revert "kfifo: fix kfifo_alloc() and kfifo_init()"
Commit
dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()") made
the kfifo code round the number of elements up. That was good for
__kfifo_alloc(), but it's actually wrong for __kfifo_init().
The difference? __kfifo_alloc() will allocate the rounded-up number of
elements, but __kfifo_init() uses an allocation done by the caller. We
can't just say "use more elements than the caller allocated", and have
to round down.
The good news? All the normal cases will be using power-of-two arrays
anyway, and most users of kfifo's don't use kfifo_init() at all, but one
of the helper macros to declare a KFIFO that enforce the proper
power-of-two behavior. But it looks like at least ibmvscsis might be
affected.
The bad news? Will Deacon refers to an old thread and points points out
that the memory ordering in kfifo's is questionable. See
https://lore.kernel.org/lkml/
20181211034032.32338-1-yuleixzhang@tencent.com/
for more.
Fixes: dfe2a77fd243 ("kfifo: fix kfifo_alloc() and kfifo_init()")
Reported-by: laokz <laokz@foxmail.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt [Fri, 30 Aug 2019 23:04:53 +0000 (16:04 -0700)]
mm: memcontrol: fix percpu vmstats and vmevents flush
Instead of using raw_cpu_read() use per_cpu() to read the actual data of
the corresponding cpu otherwise we will be reading the data of the
current cpu for the number of online CPUs.
Link: http://lkml.kernel.org/r/20190829203110.129263-1-shakeelb@google.com
Fixes: bb65f89b7d3d ("mm: memcontrol: flush percpu vmevents before releasing memcg")
Fixes: c350a99ea2b1 ("mm: memcontrol: flush percpu vmstats before releasing memcg")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Fri, 30 Aug 2019 23:04:50 +0000 (16:04 -0700)]
mm, memcg: do not set reclaim_state on soft limit reclaim
Adric Blake has noticed[1] the following warning:
WARNING: CPU: 7 PID: 175 at mm/vmscan.c:245 set_task_reclaim_state+0x1e/0x40
[...]
Call Trace:
mem_cgroup_shrink_node+0x9b/0x1d0
mem_cgroup_soft_limit_reclaim+0x10c/0x3a0
balance_pgdat+0x276/0x540
kswapd+0x200/0x3f0
? wait_woken+0x80/0x80
kthread+0xfd/0x130
? balance_pgdat+0x540/0x540
? kthread_park+0x80/0x80
ret_from_fork+0x35/0x40
---[ end trace
727343df67b2398a ]---
which tells us that soft limit reclaim is about to overwrite the
reclaim_state configured up in the call chain (kswapd in this case but
the direct reclaim is equally possible). This means that reclaim stats
would get misleading once the soft reclaim returns and another reclaim
is done.
Fix the warning by dropping set_task_reclaim_state from the soft reclaim
which is always called with reclaim_state set up.
[1] http://lkml.kernel.org/r/CAE1jjeePxYPvw1mw2B3v803xHVR_BNnz0hQUY_JDMN8ny29M6w@mail.gmail.com
Link: http://lkml.kernel.org/r/20190828071808.20410-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Adric Blake <promarbler14@gmail.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hdanton@sina.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dmitry Safonov [Fri, 30 Aug 2019 23:04:46 +0000 (16:04 -0700)]
mailmap: add aliases for Dmitry Safonov
I don't work for Virtuozzo or Samsung anymore and I've noticed that they
have started sending annoying html email-replies.
And I prioritize my personal emails over work email box, so while at it
add an entry for Arista too - so I can reply faster when needed.
Link: http://lkml.kernel.org/r/20190827220346.11123-1-dima@arista.com
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Gustavo A. R. Silva [Fri, 30 Aug 2019 23:04:43 +0000 (16:04 -0700)]
mm/z3fold.c: fix lock/unlock imbalance in z3fold_page_isolate
Fix lock/unlock imbalance by unlocking *zhdr* before return.
Addresses Coverity ID
1452811 ("Missing unlock")
Link: http://lkml.kernel.org/r/20190826030634.GA4379@embeddedor
Fixes: d776aaa9895e ("mm/z3fold.c: fix race between migration and destruction")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Fri, 30 Aug 2019 23:04:39 +0000 (16:04 -0700)]
mm, memcg: partially revert "mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones"
Commit
766a4c19d880 ("mm/memcontrol.c: keep local VM counters in sync
with the hierarchical ones") effectively decreased the precision of
per-memcg vmstats_local and per-memcg-per-node lruvec percpu counters.
That's good for displaying in memory.stat, but brings a serious
regression into the reclaim process.
One issue I've discovered and debugged is the following:
lruvec_lru_size() can return 0 instead of the actual number of pages in
the lru list, preventing the kernel to reclaim last remaining pages.
Result is yet another dying memory cgroups flooding. The opposite is
also happening: scanning an empty lru list is the waste of cpu time.
Also, inactive_list_is_low() can return incorrect values, preventing the
active lru from being scanned and freed. It can fail both because the
size of active and inactive lists are inaccurate, and because the number
of workingset refaults isn't precise. In other words, the result is
pretty random.
I'm not sure, if using the approximate number of slab pages in
count_shadow_number() is acceptable, but issues described above are
enough to partially revert the patch.
Let's keep per-memcg vmstat_local batched (they are only used for
displaying stats to the userspace), but keep lruvec stats precise. This
change fixes the dead memcg flooding on my setup.
Link: http://lkml.kernel.org/r/20190817004726.2530670-1-guro@fb.com
Fixes: 766a4c19d880 ("mm/memcontrol.c: keep local VM counters in sync with the hierarchical ones")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Fri, 30 Aug 2019 23:04:35 +0000 (16:04 -0700)]
mm/zsmalloc.c: fix build when CONFIG_COMPACTION=n
Fixes: 701d678599d0c1 ("mm/zsmalloc.c: fix race condition in zs_destroy_pool")
Link: http://lkml.kernel.org/r/201908251039.5oSbEEUT%25lkp@intel.com
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Henry Burns <henrywolfeburns@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Jonathan Adams <jwadams@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Roman Gushchin [Fri, 30 Aug 2019 23:04:32 +0000 (16:04 -0700)]
mm: memcontrol: flush percpu slab vmstats on kmem offlining
I've noticed that the "slab" value in memory.stat is sometimes 0, even
if some children memory cgroups have a non-zero "slab" value. The
following investigation showed that this is the result of the kmem_cache
reparenting in combination with the per-cpu batching of slab vmstats.
At the offlining some vmstat value may leave in the percpu cache, not
being propagated upwards by the cgroup hierarchy. It means that stats
on ancestor levels are lower than actual. Later when slab pages are
released, the precise number of pages is substracted on the parent
level, making the value negative. We don't show negative values, 0 is
printed instead.
To fix this issue, let's flush percpu slab memcg and lruvec stats on
memcg offlining. This guarantees that numbers on all ancestor levels
are accurate and match the actual number of outstanding slab pages.
Link: http://lkml.kernel.org/r/20190819202338.363363-3-guro@fb.com
Fixes: fb2f2b0adb98 ("mm: memcg/slab: reparent memcg kmem_caches on cgroup removal")
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David S. Miller [Sat, 31 Aug 2019 00:50:10 +0000 (17:50 -0700)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Spurious warning when loading rules using the physdev match,
from Todd Seidelmann.
2) Fix FTP conntrack helper debugging output, from Thomas Jarosch.
3) Restore per-netns nf_conntrack_{acct,helper,timeout} sysctl knobs,
from Florian Westphal.
4) Clear skbuff timestamp from the flowtable datapath, also from Florian.
5) Fix incorrect byteorder of NFT_META_BRI_IIFVPROTO, from wenxu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 31 Aug 2019 00:39:37 +0000 (17:39 -0700)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2019-08-31
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix 32-bit zero-extension during constant blinding which
has been causing a regression on ppc64, from Naveen.
2) Fix a latency bug in nfp driver when updating stack index
register, from Jiong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 29 Aug 2019 13:12:11 +0000 (14:12 +0100)]
rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2]
When a local endpoint is ceases to be in use, such as when the kafs module
is unloaded, the kernel will emit an assertion failure if there are any
outstanding client connections:
rxrpc: Assertion failed
------------[ cut here ]------------
kernel BUG at net/rxrpc/local_object.c:433!
and even beyond that, will evince other oopses if there are service
connections still present.
Fix this by:
(1) Removing the triggering of connection reaping when an rxrpc socket is
released. These don't actually clean up the connections anyway - and
further, the local endpoint may still be in use through another
socket.
(2) Mark the local endpoint as dead when we start the process of tearing
it down.
(3) When destroying a local endpoint, strip all of its client connections
from the idle list and discard the ref on each that the list was
holding.
(4) When destroying a local endpoint, call the service connection reaper
directly (rather than through a workqueue) to immediately kill off all
outstanding service connections.
(5) Make the service connection reaper reap connections for which the
local endpoint is marked dead.
Only after destroying the connections can we close the socket lest we get
an oops in a workqueue that's looking at a connection or a peer.
Fixes: 3d18cbb7fd0c ("rxrpc: Fix conn expiry timers")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 30 Aug 2019 21:54:41 +0000 (14:54 -0700)]
Merge tag 'rxrpc-fixes-
20190827' of git://git./linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fix use of skb_cow_data()
Here's a series of patches that replaces the use of skb_cow_data() in rxrpc
with skb_unshare() early on in the input process. The problem that is
being seen is that skb_cow_data() indirectly requires that the maximum
usage count on an sk_buff be 1, and it may generate an assertion failure in
pskb_expand_head() if not.
This can occur because rxrpc_input_data() may be still holding a ref when
it has just attached the sk_buff to the rx ring and given that attachment
its own ref. If recvmsg happens fast enough, skb_cow_data() can see the
ref still held by the softirq handler.
Further, a packet may contain multiple subpackets, each of which gets its
own attachment to the ring and its own ref - also making skb_cow_data() go
bang.
Fix this by:
(1) The DATA packet is currently parsed for subpackets twice by the input
routines. Parse it just once instead and make notes in the sk_buff
private data.
(2) Use the notes from (1) when attaching the packet to the ring multiple
times. Once the packet is attached to the ring, recvmsg can see it
and start modifying it, so the softirq handler is not permitted to
look inside it from that point.
(3) Pass the ref from the input code to the ring rather than getting an
extra ref. rxrpc_input_data() uses a ref on the second refcount to
prevent the packet from evaporating under it.
(4) Call skb_unshare() on secured DATA packets in rxrpc_input_packet()
before we take call->input_lock. Other sorts of packets don't get
modified and so can be left.
A trace is emitted if skb_unshare() eats the skb. Note that
skb_share() for our accounting in this regard as we can't see the
parameters in the packet to log in a trace line if it releases it.
(5) Remove the calls to skb_cow_data(). These are then no longer
necessary.
There are also patches to improve the rxrpc_skb tracepoint to make sure
that Tx-derived buffers are identified separately from Rx-derived buffers
in the trace.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Chen-Yu Tsai [Thu, 29 Aug 2019 03:17:24 +0000 (11:17 +0800)]
net: stmmac: dwmac-rk: Don't fail if phy regulator is absent
The devicetree binding lists the phy phy as optional. As such, the
driver should not bail out if it can't find a regulator. Instead it
should just skip the remaining regulator related code and continue
on normally.
Skip the remainder of phy_power_on() if a regulator supply isn't
available. This also gets rid of the bogus return code.
Fixes: 2e12f536635f ("net: stmmac: dwmac-rk: Use standard devicetree property for phy regulator")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
YueHaibing [Thu, 29 Aug 2019 02:46:00 +0000 (10:46 +0800)]
amd-xgbe: Fix error path in xgbe_mod_init()
In xgbe_mod_init(), we should do cleanup if some error occurs
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: efbaa828330a ("amd-xgbe: Add support to handle device renaming")
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Naveen N. Rao [Thu, 4 Jul 2019 14:34:42 +0000 (20:04 +0530)]
ftrace: Check for successful allocation of hash
In register_ftrace_function_probe(), we are not checking the return
value of alloc_and_copy_ftrace_hash(). The subsequent call to
ftrace_match_records() may end up dereferencing the same. Add a check to
ensure this doesn't happen.
Link: http://lkml.kernel.org/r/26e92574f25ad23e7cafa3cf5f7a819de1832cbe.1562249521.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 1ec3a81a0cf42 ("ftrace: Have each function probe use its own ftrace_ops")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Steven Rostedt (VMware) [Fri, 30 Aug 2019 20:30:01 +0000 (16:30 -0400)]
ftrace: Check for empty hash and comment the race with registering probes
The race between adding a function probe and reading the probes that exist
is very subtle. It needs a comment. Also, the issue can also happen if the
probe has has the EMPTY_HASH as its func_hash.
Cc: stable@vger.kernel.org
Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Naveen N. Rao [Thu, 4 Jul 2019 14:34:41 +0000 (20:04 +0530)]
ftrace: Fix NULL pointer dereference in t_probe_next()
LTP testsuite on powerpc results in the below crash:
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc00000000029d800
Oops: Kernel access of bad area, sig: 11 [#1]
LE SMP NR_CPUS=2048 NUMA PowerNV
...
CPU: 68 PID: 96584 Comm: cat Kdump: loaded Tainted: G W
NIP:
c00000000029d800 LR:
c00000000029dac4 CTR:
c0000000001e6ad0
REGS:
c0002017fae8ba10 TRAP: 0300 Tainted: G W
MSR:
9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR:
28022422 XER:
20040000
CFAR:
c00000000029d90c DAR:
0000000000000000 DSISR:
40000000 IRQMASK: 0
...
NIP [
c00000000029d800] t_probe_next+0x60/0x180
LR [
c00000000029dac4] t_mod_start+0x1a4/0x1f0
Call Trace:
[
c0002017fae8bc90] [
c000000000cdbc40] _cond_resched+0x10/0xb0 (unreliable)
[
c0002017fae8bce0] [
c0000000002a15b0] t_start+0xf0/0x1c0
[
c0002017fae8bd30] [
c0000000004ec2b4] seq_read+0x184/0x640
[
c0002017fae8bdd0] [
c0000000004a57bc] sys_read+0x10c/0x300
[
c0002017fae8be30] [
c00000000000b388] system_call+0x5c/0x70
The test (ftrace_set_ftrace_filter.sh) is part of ftrace stress tests
and the crash happens when the test does 'cat
$TRACING_PATH/set_ftrace_filter'.
The address points to the second line below, in t_probe_next(), where
filter_hash is dereferenced:
hash = iter->probe->ops.func_hash->filter_hash;
size = 1 << hash->size_bits;
This happens due to a race with register_ftrace_function_probe(). A new
ftrace_func_probe is created and added into the func_probes list in
trace_array under ftrace_lock. However, before initializing the filter,
we drop ftrace_lock, and re-acquire it after acquiring regex_lock. If
another process is trying to read set_ftrace_filter, it will be able to
acquire ftrace_lock during this window and it will end up seeing a NULL
filter_hash.
Fix this by just checking for a NULL filter_hash in t_probe_next(). If
the filter_hash is NULL, then this probe is just being added and we can
simply return from here.
Link: http://lkml.kernel.org/r/05e021f757625cbbb006fad41380323dbe4e3b43.1562249521.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes: 7b60f3d876156 ("ftrace: Dynamically create the probe ftrace_ops for the trace_array")
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Linus Torvalds [Fri, 30 Aug 2019 18:58:02 +0000 (11:58 -0700)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
"Three fixes for ARM this time around:
- A fix for update_sections_early() to cope with NULL ->mm pointers.
- A correction to the backtrace code to allow proper backtraces.
- Reinforcement of pfn_valid() with PFNs >= 4GiB"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8901/1: add a criteria for pfn_valid of arm
ARM: 8897/1: check stmfd instruction using right shift
ARM: 8874/1: mm: only adjust sections of valid mm structures
Eric Biggers [Fri, 30 Aug 2019 15:52:26 +0000 (16:52 +0100)]
keys: ensure that ->match_free() is called in request_key_and_link()
If check_cached_key() returns a non-NULL value, we still need to call
key_type::match_free() to undo key_type::match_preparse().
Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 30 Aug 2019 17:53:12 +0000 (10:53 -0700)]
Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"The majority of the fixes this time are for OMAP hardware, here is a
breakdown of the significant changes:
Various device tree bug fixes:
- TI am57xx boards need a voltage level fix to avoid damaging SD
cards
- vf610-bk4 fails to detect its flash due to an incorrect description
- meson-g12a USB phy configuration fails
- meson-g12b reboot should not power off the SD card
- Some corrections for apparently harmless differences from the
documentation.
Regression fixes:
- ams-delta FIQ interrupts broke in 5.3
- TI am3/am4 mmc controllers broke in 5.2
The logic_pio driver (used on some Huawei ARM servers) got a few bug
fixes for reliability.
And a couple of compile-time warning fixes"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST
soc: ti: pm33xx: Make two symbols static
soc: ti: pm33xx: Fix static checker warnings
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: dts: Fix incomplete dts data for am3 and am4 mmc
bus: ti-sysc: Simplify cleanup upon failures in sysc_probe()
ARM: OMAP1: ams-delta-fiq: Fix missing irq_ack
ARM: dts: dra74x: Fix iodelay configuration for mmc3
ARM: dts: am335x: Fix UARTs length
ARM: OMAP2+: Fix omap4 errata warning on other SoCs
bus: hisi_lpc: Add .remove method to avoid driver unbind crash
bus: hisi_lpc: Unregister logical PIO range to avoid potential use-after-free
lib: logic_pio: Add logic_pio_unregister_range()
lib: logic_pio: Avoid possible overlap for unregistering regions
lib: logic_pio: Fix RCU usage
arm64: dts: amlogic: odroid-n2: keep SD card regulator always on
arm64: dts: meson-g12a-sei510: enable IR controller
arm64: dts: meson-g12a: add missing dwc2 phy-names
ARM: dts: vf610-bk4: Fix qspi node description
ARM: dts: Fix incorrect dcan register mapping for am3, am4 and dra7
...
Linus Torvalds [Fri, 30 Aug 2019 16:23:45 +0000 (09:23 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma
Pull rdma fix from Doug Ledford:
"Much calmer week this week. Just one patch queued up:
The way the siw driver was locking around the traversal of the list of
ipv6 addresses on a device was causing a scheduling while atomic
issue. Bernard straightened it out by using the rtnl_lock"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/siw: Fix IPv6 addr_list locking
Linus Torvalds [Fri, 30 Aug 2019 16:09:54 +0000 (09:09 -0700)]
Merge tag 'ceph-for-5.3-rc7' of git://github.com/ceph/ceph-client
Pull two ceph fixes from Ilya Dryomov:
"A fix for a -rc1 regression in rbd and a trivial static checker fix"
* tag 'ceph-for-5.3-rc7' of git://github.com/ceph/ceph-client:
rbd: restore zeroing past the overlap when reading from parent
libceph: don't call crypto_free_sync_skcipher() on a NULL tfm
Linus Torvalds [Fri, 30 Aug 2019 15:32:10 +0000 (08:32 -0700)]
Merge tag 'mmc-v5.3-rc5' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix init of SD cards reporting an invalid VDD range
MMC host:
- sprd: Fixes for clocks, card-detect, write-protect etc
- cadence: Fix ADMA 64-bit addressing
- tegra: Re-allow writing to SD card when GPIO pin is absent
- at91: Fix eMMC init by clearing HS200 cap as it's not supported"
* tag 'mmc-v5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-cadence: enable v4_mode to fix ADMA 64-bit addressing
mmc: sdhci-sprd: clear the UHS-I modes read from registers
mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION
mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN
mmc: sdhci-sprd: add get_ro hook function
mmc: sdhci-sprd: fixed incorrect clock divider
mmc: core: Fix init of SD cards reporting an invalid VDD range
mmc: sdhci-of-at91: add quirk for broken HS200
Revert "mmc: sdhci-tegra: drop ->get_ro() implementation"
Linus Torvalds [Fri, 30 Aug 2019 15:21:24 +0000 (08:21 -0700)]
Merge tag 'drm-fixes-2019-08-30' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Nothing too crazy, there's probably more patches than I'd like at this
stage, but they are all pretty self contained:
amdgpu:
- Fix GFXOFF regression for PCO and RV2
- Fix missing fence reference
- Fix VG20 power readings on certain SMU firmware versions
- Fix dpm level setup for VG20
- Add an ATPX laptop quirk
i915:
- Fix DP MST max BPC property creation after DRM register
- Fix unused ggtt deballooning and NULL dereference in guest
- Fix DSC eDP transcoder identification
- Fix WARN from DMA API debug by setting DMA max segment size
qxl:
- Make qxl reservel the vga ports using vgaargb to prevent switching to vga compatibility mode.
omap:
- Fix omap port lookup for SDI output
virtio:
- Use virtio_max_dma_size to fix an issue with swiotlb.
komeda:
- Compiler fixes to komeda.
- Add missing of_node_get() call in komeda.
- Reorder the komeda de-init functions"
* tag 'drm-fixes-2019-08-30' of git://anongit.freedesktop.org/drm/drm:
drm/komeda: Reordered the komeda's de-init functions
drm/amdgpu: fix GFXOFF on Picasso and Raven2
drm/amdgpu: Add APTX quirk for Dell Latitude 5495
drm/amd/powerplay: correct Vega20 dpm level related settings
drm/i915: Call dma_set_max_seg_size() in i915_driver_hw_probe()
drm/i915/dp: Fix DSC enable code to use cpu_transcoder instead of encoder->type
drm/i915: Don't deballoon unused ggtt drm_mm_node in linux guest
drm/i915: Do not create a new max_bpc prop for MST connectors
drm/powerplay: Fix Vega20 power reading again
drm/powerplay: Fix Vega20 Average Power value v4
drm/amdgpu: fix dma_fence_wait without reference
drm/komeda: Add missing of_node_get() call
drm/komeda: Clean warning 'komeda_component_add' might be a candidate for 'gnu_printf'
drm/komeda: Fix warning -Wunused-but-set-variable
drm/komeda: Fix error: not allocating enough data 1592 vs 1584
drm/virtio: use virtio_max_dma_size
drm/omap: Fix port lookup for SDI output
drm/qxl: get vga ioports
Hsin-Yi Wang [Thu, 22 Aug 2019 09:45:17 +0000 (17:45 +0800)]
i2c: mediatek: disable zero-length transfers for mt8183
Quoting from mt8183 datasheet, the number of transfers to be
transferred in one transaction should be set to bigger than 1,
so we should forbid zero-length transfer and update functionality.
Reported-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: Qii Wang <qii.wang@mediatek.com>
[wsa: shortened commit message a little]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Lori Hikichi [Thu, 8 Aug 2019 03:37:52 +0000 (09:07 +0530)]
i2c: iproc: Stop advertising support of SMBUS quick cmd
The driver does not support the SMBUS Quick command so remove the
flag that indicates that level of support.
By default the i2c_detect tool uses the quick command to try and
detect devices at some bus addresses. If the quick command is used
then we will not detect the device, even though it is present.
Fixes: e6e5dd3566e0 (i2c: iproc: Add Broadcom iProc I2C Driver)
Signed-off-by: Lori Hikichi <lori.hikichi@broadcom.com>
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Denis Efremov [Tue, 13 Aug 2019 06:09:13 +0000 (09:09 +0300)]
MAINTAINERS: i2c mv64xxx: Update documentation path
Update MAINTAINERS record to reflect the file move
from i2c-mv64xxx.txt to marvell,mv64xxx-i2c.yaml.
Fixes: f8bbde72ef44 ("dt-bindings: i2c: mv64xxx: Add YAML schemas")
Signed-off-by: Denis Efremov <efremov@linux.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Kim Phillips [Mon, 26 Aug 2019 19:57:30 +0000 (14:57 -0500)]
perf/x86/amd/ibs: Fix sample bias for dispatched micro-ops
When counting dispatched micro-ops with cnt_ctl=1, in order to prevent
sample bias, IBS hardware preloads the least significant 7 bits of
current count (IbsOpCurCnt) with random values, such that, after the
interrupt is handled and counting resumes, the next sample taken
will be slightly perturbed.
The current count bitfield is in the IBS execution control h/w register,
alongside the maximum count field.
Currently, the IBS driver writes that register with the maximum count,
leaving zeroes to fill the current count field, thereby overwriting
the random bits the hardware preloaded for itself.
Fix the driver to actually retain and carry those random bits from the
read of the IBS control register, through to its write, instead of
overwriting the lower current count bits with zeroes.
Tested with:
perf record -c 100001 -e ibs_op/cnt_ctl=1/pp -a -C 0 taskset -c 0 <workload>
'perf annotate' output before:
15.70 65: addsd %xmm0,%xmm1
17.30 add $0x1,%rax
15.88 cmp %rdx,%rax
je 82
17.32 72: test $0x1,%al
jne 7c
7.52 movapd %xmm1,%xmm0
5.90 jmp 65
8.23 7c: sqrtsd %xmm1,%xmm0
12.15 jmp 65
'perf annotate' output after:
16.63 65: addsd %xmm0,%xmm1
16.82 add $0x1,%rax
16.81 cmp %rdx,%rax
je 82
16.69 72: test $0x1,%al
jne 7c
8.30 movapd %xmm1,%xmm0
8.13 jmp 65
8.24 7c: sqrtsd %xmm1,%xmm0
8.39 jmp 65
Tested on Family 15h and 17h machines.
Machines prior to family 10h Rev. C don't have the RDWROPCNT capability,
and have the IbsOpCurCnt bitfield reserved, so this patch shouldn't
affect their operation.
It is unknown why commit
db98c5faf8cb ("perf/x86: Implement 64-bit
counter support for IBS") ignored the lower 4 bits of the IbsOpCurCnt
field; the number of preloaded random bits has always been 7, AFAICT.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: "Arnaldo Carvalho de Melo" <acme@kernel.org>
Cc: <x86@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Borislav Petkov" <bp@alien8.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: "Namhyung Kim" <namhyung@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20190826195730.30614-1-kim.phillips@amd.com
Josh Hunt [Mon, 19 Aug 2019 23:13:31 +0000 (19:13 -0400)]
perf/x86/intel: Restrict period on Nehalem
We see our Nehalem machines reporting 'perfevents: irq loop stuck!' in
some cases when using perf:
perfevents: irq loop stuck!
WARNING: CPU: 0 PID: 3485 at arch/x86/events/intel/core.c:2282 intel_pmu_handle_irq+0x37b/0x530
...
RIP: 0010:intel_pmu_handle_irq+0x37b/0x530
...
Call Trace:
<NMI>
? perf_event_nmi_handler+0x2e/0x50
? intel_pmu_save_and_restart+0x50/0x50
perf_event_nmi_handler+0x2e/0x50
nmi_handle+0x6e/0x120
default_do_nmi+0x3e/0x100
do_nmi+0x102/0x160
end_repeat_nmi+0x16/0x50
...
? native_write_msr+0x6/0x20
? native_write_msr+0x6/0x20
</NMI>
intel_pmu_enable_event+0x1ce/0x1f0
x86_pmu_start+0x78/0xa0
x86_pmu_enable+0x252/0x310
__perf_event_task_sched_in+0x181/0x190
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
? __switch_to_asm+0x41/0x70
? __switch_to_asm+0x35/0x70
finish_task_switch+0x158/0x260
__schedule+0x2f6/0x840
? hrtimer_start_range_ns+0x153/0x210
schedule+0x32/0x80
schedule_hrtimeout_range_clock+0x8a/0x100
? hrtimer_init+0x120/0x120
ep_poll+0x2f7/0x3a0
? wake_up_q+0x60/0x60
do_epoll_wait+0xa9/0xc0
__x64_sys_epoll_wait+0x1a/0x20
do_syscall_64+0x4e/0x110
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fdeb1e96c03
...
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: acme@kernel.org
Cc: Josh Hunt <johunt@akamai.com>
Cc: bpuranda@akamai.com
Cc: mingo@redhat.com
Cc: jolsa@redhat.com
Cc: tglx@linutronix.de
Cc: namhyung@kernel.org
Cc: alexander.shishkin@linux.intel.com
Link: https://lkml.kernel.org/r/1566256411-18820-1-git-send-email-johunt@akamai.com
Masahiro Yamada [Thu, 29 Aug 2019 10:49:26 +0000 (19:49 +0900)]
mmc: sdhci-cadence: enable v4_mode to fix ADMA 64-bit addressing
The IP datasheet says this controller is compatible with SD Host
Specification Version v4.00.
As it turned out, the ADMA of this IP does not work with 64-bit mode
when it is in the Version 3.00 compatible mode; it understands the
old 64-bit descriptor table (as defined in SDHCI v2), but the ADMA
System Address Register (SDHCI_ADMA_ADDRESS) cannot point to the
64-bit address.
I noticed this issue only after commit
bd2e75633c80 ("dma-contiguous:
use fallback alloc_pages for single pages"). Prior to that commit,
dma_set_mask_and_coherent() returned the dma address that fits in
32-bit range, at least for the default arm64 configuration
(arch/arm64/configs/defconfig). Now the host->adma_addr exceeds the
32-bit limit, causing the real problem for the Socionext SoCs.
(As a side-note, I was also able to reproduce the issue for older
kernels by turning off CONFIG_DMA_CMA.)
Call sdhci_enable_v4_mode() to fix this.
Cc: <stable@vger.kernel.org> # v4.20+
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Chunyan Zhang [Wed, 28 Aug 2019 02:17:36 +0000 (10:17 +0800)]
mmc: sdhci-sprd: clear the UHS-I modes read from registers
sprd's sd host controller supports SDR50/SDR104/DDR50 though, the UHS-I
mode used by the specific card can be selected via devicetree only.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Chunyan Zhang [Wed, 28 Aug 2019 02:17:35 +0000 (10:17 +0800)]
mms: sdhci-sprd: add SDHCI_QUIRK_BROKEN_CARD_DETECTION
sprd's sd host controller doesn't support detection to
card insert or remove.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Chunyan Zhang [Wed, 28 Aug 2019 02:17:34 +0000 (10:17 +0800)]
mmc: sdhci-sprd: add SDHCI_QUIRK2_PRESET_VALUE_BROKEN
The bit of PRESET_VAL_ENABLE in HOST_CONTROL2 register is reserved on
sprd's sd host controller, set quirk2 to disable configuring this.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Chunyan Zhang [Wed, 28 Aug 2019 02:17:33 +0000 (10:17 +0800)]
mmc: sdhci-sprd: add get_ro hook function
sprd's sd host controller doesn't support write protect to sd card.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Chunyan Zhang [Wed, 28 Aug 2019 02:17:32 +0000 (10:17 +0800)]
mmc: sdhci-sprd: fixed incorrect clock divider
The register SDHCI_CLOCK_CONTROL should be cleared before config clock
divider, otherwise the frequency configured maybe lower than we
expected.
Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Chunyan Zhang <zhang.lyra@gmail.com>
Reviewed-by: Baolin Wang <baolin.wang@linaro.org>
Tested-by: Baolin Wang <baolin.wang@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Ulf Hansson [Tue, 27 Aug 2019 08:10:43 +0000 (10:10 +0200)]
mmc: core: Fix init of SD cards reporting an invalid VDD range
The OCR register defines the supported range of VDD voltages for SD cards.
However, it has turned out that some SD cards reports an invalid voltage
range, for example having bit7 set.
When a host supports MMC_CAP2_FULL_PWR_CYCLE and some of the voltages from
the invalid VDD range, this triggers the core to run a power cycle of the
card to try to initialize it at the lowest common supported voltage.
Obviously this fails, since the card can't support it.
Let's fix this problem, by clearing invalid bits from the read OCR register
for SD cards, before proceeding with the VDD voltage negotiation.
Cc: stable@vger.kernel.org
Reported-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Philip Langdale <philipl@overt.org>
Tested-by: Philip Langdale <philipl@overt.org>
Tested-by: Manuel Presnitz <mail@mpy.de>
Dave Airlie [Fri, 30 Aug 2019 00:53:53 +0000 (10:53 +1000)]
Merge tag 'drm-intel-fixes-2019-08-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.3-rc7:
- Fix DP MST max BPC property creation after DRM register
- Fix unused ggtt deballooning and NULL dereference in guest
- Fix DSC eDP transcoder identification
- Fix WARN from DMA API debug by setting DMA max segment size
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a7bseati.fsf@intel.com
Dave Airlie [Fri, 30 Aug 2019 00:52:06 +0000 (10:52 +1000)]
Merge tag 'drm-fixes-5.3-2019-08-28' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.3-2019-08-28:
amdgpu:
- Fix GFXOFF regression for PCO and RV2
- Fix missing fence reference
- Fix VG20 power readings on certain SMU firmware versions
- Fix dpm level setup for VG20
- Add an ATPX laptop quirk
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829022925.32678-1-alexander.deucher@amd.com
Linus Torvalds [Fri, 30 Aug 2019 00:51:23 +0000 (17:51 -0700)]
Merge tag '5.3-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A few small SMB3 fixes, and a larger one to fix various older string
handling functions"
* tag '5.3-rc6-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: replace various strncpy with strscpy and similar
cifs: Use kzfree() to zero out the password
cifs: set domainName when a domain-key is used in multiuser
wenxu [Wed, 28 Aug 2019 15:02:33 +0000 (23:02 +0800)]
netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder
Get the vlan_proto of ingress bridge in network byteorder as userspace
expects. Otherwise this is inconsistent with NFT_META_PROTOCOL.
Fixes: 2a3a93ef0ba5 ("netfilter: nft_meta_bridge: Add NFT_META_BRI_IIFVPROTO support")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Dave Airlie [Fri, 30 Aug 2019 00:40:54 +0000 (10:40 +1000)]
Merge tag 'drm-misc-fixes-2019-08-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.3 (rc7?):
- Make qxl reservel the vga ports using vgaargb to prevent switching to vga compatibility mode.
- Fix omap port lookup for SDI output
- Use virtio_max_dma_size to fix an issue with swiotlb.
- Compiler fixes to komeda.
- Add missing of_node_get() call in komeda.
- Reorder the komeda de-init functions.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f187c28b-6279-2c4f-3e53-296ee899133b@linux.intel.com
David S. Miller [Thu, 29 Aug 2019 23:44:15 +0000 (16:44 -0700)]
Merge tag 'mac80211-for-davem-2019-08-29' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
We have
* one fix for a driver as I'm covering for Kalle while he's on vacation
* two fixes for eapol-over-nl80211 work
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Cooks [Fri, 2 Aug 2019 12:52:46 +0000 (14:52 +0200)]
i2c: piix4: Fix port selection for AMD Family 16h Model 30h
Family 16h Model 30h SMBus controller needs the same port selection fix
as described and fixed in commit
0fe16195f891 ("i2c: piix4: Fix SMBus port
selection for AMD Family 17h chips")
commit
6befa3fde65f ("i2c: piix4: Support alternative port selection
register") also fixed the port selection for Hudson2, but unfortunately
this is not the exact same device and the AMD naming and PCI Device IDs
aren't particularly helpful here.
The SMBus port selection register is common to the following Families
and models, as documented in AMD's publicly available BIOS and Kernel
Developer Guides:
50742 - Family 15h Model 60h-6Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)
55072 - Family 15h Model 70h-7Fh (PCI_DEVICE_ID_AMD_KERNCZ_SMBUS)
52740 - Family 16h Model 30h-3Fh (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS)
The Hudson2 PCI Device ID (PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) is shared
between Bolton FCH and Family 16h Model 30h, but the location of the
SmBus0Sel port selection bits are different:
51192 - Bolton Register Reference Guide
We distinguish between Bolton and Family 16h Model 30h using the PCI
Revision ID:
Bolton is device 0x780b, revision 0x15
Family 16h Model 30h is device 0x780b, revision 0x1F
Family 15h Model 60h and 70h are both device 0x790b, revision 0x4A.
The following additional public AMD BKDG documents were checked and do
not share the same port selection register:
42301 - Family 15h Model 00h-0Fh doesn't mention any
42300 - Family 15h Model 10h-1Fh doesn't mention any
49125 - Family 15h Model 30h-3Fh doesn't mention any
48751 - Family 16h Model 00h-0Fh uses the previously supported
index register SB800_PIIX4_PORT_IDX_ALT at 0x2e
Signed-off-by: Andrew Cooks <andrew.cooks@opengear.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: stable@vger.kernel.org [v4.6+]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Thomas Gleixner [Wed, 28 Aug 2019 22:31:34 +0000 (00:31 +0200)]
x86/mm/cpa: Prevent large page split when ftrace flips RW on kernel text
ftrace does not use text_poke() for enabling trace functionality. It uses
its own mechanism and flips the whole kernel text to RW and back to RO.
The CPA rework removed a loop based check of 4k pages which tried to
preserve a large page by checking each 4k page whether the change would
actually cover all pages in the large page.
This resulted in endless loops for nothing as in testing it turned out that
it actually never preserved anything. Of course testing missed to include
ftrace, which is the one and only case which benefitted from the 4k loop.
As a consequence enabling function tracing or ftrace based kprobes results
in a full 4k split of the kernel text, which affects iTLB performance.
The kernel RO protection is the only valid case where this can actually
preserve large pages.
All other static protections (RO data, data NX, PCI, BIOS) are truly
static. So a conflict with those protections which results in a split
should only ever happen when a change of memory next to a protected region
is attempted. But these conflicts are rightfully splitting the large page
to preserve the protected regions. In fact a change to the protected
regions itself is a bug and is warned about.
Add an exception for the static protection check for kernel text RO when
the to be changed region spawns a full large page which allows to preserve
the large mappings. This also prevents the syslog to be spammed about CPA
violations when ftrace is used.
The exception needs to be removed once ftrace switched over to text_poke()
which avoids the whole issue.
Fixes: 585948f4f695 ("x86/mm/cpa: Avoid the 4k pages check completely")
Reported-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Song Liu <songliubraving@fb.com>
Reviewed-by: Song Liu <songliubraving@fb.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282355340.1938@nanos.tec.linutronix.de
Jarkko Nikula [Thu, 15 Aug 2019 13:52:11 +0000 (16:52 +0300)]
i2c: designware: Synchronize IRQs when unregistering slave client
Make sure interrupt handler i2c_dw_irq_handler_slave() has finished
before clearing the the dev->slave pointer in i2c_dw_unreg_slave().
There is possibility for a race if i2c_dw_irq_handler_slave() is running
on another CPU while clearing the dev->slave pointer.
Reported-by: Krzysztof Adamski <krzysztof.adamski@nokia.com>
Reported-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Andy Shevchenko [Fri, 16 Aug 2019 13:17:05 +0000 (16:17 +0300)]
i2c: i801: Avoid memory leak in check_acpi_smo88xx_device()
check_acpi_smo88xx_device() utilizes acpi_get_object_info() which in its turn
allocates a buffer. User is responsible to clean allocated resources. The last
has been missed in the original code. Fix it here.
While here, replace !ACPI_SUCCESS() with ACPI_FAILURE().
Fixes: 19b07cb4a187 ("i2c: i801: Register optional lis3lv02d I2C device on Dell machines")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Wolfram Sang [Mon, 19 Aug 2019 20:48:25 +0000 (22:48 +0200)]
i2c: make i2c_unregister_device() ERR_PTR safe
We are moving towards returning ERR_PTRs when i2c_new_*_device() calls
fail. Make sure its counterpart for unregistering handles ERR_PTRs as
well.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Linus Torvalds [Thu, 29 Aug 2019 16:28:25 +0000 (09:28 -0700)]
Merge tag 'Wimplicit-fallthrough-5.3-rc7' of git://git./linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo A. R. Silva:
"Fix fall-through warnings on arc and nds32 for multiple
configurations"
* tag 'Wimplicit-fallthrough-5.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
nds32: Mark expected switch fall-throughs
ARC: unwind: Mark expected switch fall-through
git.samba.org / sfrench / cifs-2.6.git / log