sfrench/cifs-2.6.git
4 years agoMerge branches 'thermal-core', 'thermal-tool', 'thermal-intel' and 'thermal-soc'...
Zhang Rui [Thu, 2 Nov 2017 08:32:25 +0000 (16:32 +0800)]
Merge branches 'thermal-core', 'thermal-tool', 'thermal-intel' and 'thermal-soc' into next

4 years agoMerge branch 'imx-nvmem' into thermal-soc
Zhang Rui [Thu, 2 Nov 2017 08:31:52 +0000 (16:31 +0800)]
Merge branch 'imx-nvmem' into thermal-soc

4 years agothermal: pch: Add Cannon Lake support
Srinivas Pandruvada [Wed, 1 Nov 2017 16:39:51 +0000 (09:39 -0700)]
thermal: pch: Add Cannon Lake support

Added Cannon Lake PCH ids.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agothermal: int340x: processor_thermal: Add Coffee Lake support
Srinivas Pandruvada [Wed, 1 Nov 2017 16:39:50 +0000 (09:39 -0700)]
thermal: int340x: processor_thermal: Add Coffee Lake support

Add new PCI id for Coffee lake processor thermal device.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agothermal: int340x: processor_thermal: Add Cannon Lake support
Srinivas Pandruvada [Wed, 1 Nov 2017 16:39:49 +0000 (09:39 -0700)]
thermal: int340x: processor_thermal: Add Cannon Lake support

Added PCI-ID of Cannon Lake thermal device.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agothermal: bxt: remove redundant variable trip
Colin Ian King [Wed, 1 Nov 2017 09:41:18 +0000 (09:41 +0000)]
thermal: bxt: remove redundant variable trip

Variable trip is assigned but never read, hence it is redundant
and can be removed. Cleans up clang warning:

drivers/thermal/intel_bxt_pmic_thermal.c:204:4: warning: Value stored
to 'trip' is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agothermal: cpu_cooling: pr_err() strings should end with newlines
Arvind Yadav [Tue, 24 Oct 2017 07:50:39 +0000 (13:20 +0530)]
thermal: cpu_cooling: pr_err() strings should end with newlines

pr_err() messages should end with a new-line to avoid other messages
being concatenated.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Javi Merino <javi.merino@kernel.org>
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal: add brcmstb AVS TMON driver
Brian Norris [Tue, 26 Sep 2017 21:27:59 +0000 (14:27 -0700)]
thermal: add brcmstb AVS TMON driver

The AVS TMON core provides temperature readings, a pair of configurable
high- and low-temperature threshold interrupts, and an emergency
over-temperature chip reset. The driver utilizes the first two to
provide temperature readings and high-temperature notifications to
applications. The over-temperature reset is not exposed to
applications; this reset threshold is critical to the system and should
be set with care within the bootloader.

Applications may choose to utilize the notification mechanism, the
temperature reading mechanism (e.g., through polling), or both.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agoDocumentation: devicetree: add binding for Broadcom STB AVS TMON
Brian Norris [Tue, 26 Sep 2017 21:27:58 +0000 (14:27 -0700)]
Documentation: devicetree: add binding for Broadcom STB AVS TMON

Add binding for Broadcom STB thermal.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Add support for hi3660 SoC
Kevin Wangtao [Sun, 22 Oct 2017 08:54:35 +0000 (10:54 +0200)]
thermal/drivers/hisi: Add support for hi3660 SoC

This patch adds the support for thermal sensor on the Hi3660 SoC.
Hi3660 tsensor support alarm in alarm threshold, it also has a configurable
hysteresis interval, interrupt will be triggered when temperature rise above
the alarm threshold or fall below the hysteresis threshold.

Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Prepare to add support for other hisi platforms
Kevin Wangtao [Sun, 22 Oct 2017 08:54:34 +0000 (10:54 +0200)]
thermal/drivers/hisi: Prepare to add support for other hisi platforms

For platform compatibility, add the tsensor ops to a thermal data
structure. Each platform has its own probe function to register proper
tsensor ops function to the pointer, platform related resource request
are also implemented in the platform probe function.

Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Add platform prefix to function name
Kevin Wangtao [Sun, 22 Oct 2017 08:54:33 +0000 (10:54 +0200)]
thermal/drivers/hisi: Add platform prefix to function name

As the next patches will provide support for the hikey3660's sensor,
several functions with the same purpose but for different platforms will
be introduced.

In order to make a clear distinction between them, let's prefix the
function names with the platform name.

This patch has no functional changes, only name changes.

Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Put platform code together
Kevin Wangtao [Sun, 22 Oct 2017 08:54:32 +0000 (10:54 +0200)]
thermal/drivers/hisi: Put platform code together

Reorganize the code for next patches by moving the functions upper in
the file which will prevent a forward declaration. There is no functional
change here.

Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/qcom-spmi: Use devm_iio_channel_get
Daniel Lezcano [Thu, 19 Oct 2017 17:06:00 +0000 (19:06 +0200)]
thermal/drivers/qcom-spmi: Use devm_iio_channel_get

The iio_channel_get() function has now its devm_ version.

Use it and remove all the rollback code for iio_channel_release() as well
as the .remove ops.

[Compiled tested only]

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/generic-iio-adc: Switch tz request to devm version
Daniel Lezcano [Thu, 19 Oct 2017 17:05:59 +0000 (19:05 +0200)]
thermal/drivers/generic-iio-adc: Switch tz request to devm version

Everything mentionned here:
 https://lkml.org/lkml/2016/4/20/850

This driver was added before the devm_iio_channel_get() function version was
merged. The sensor should be released before the iio channel, thus we had to
use the non-devm version of thermal_zone_of_sensor_register().

Now the devm_iio_channel_get() is available, do the corresponding change in
this driver and remove gadc_thermal_remove().

[Compiled tested only]

Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/step_wise: Fix temperature regulation misbehavior
Daniel Lezcano [Thu, 19 Oct 2017 17:05:58 +0000 (19:05 +0200)]
thermal/drivers/step_wise: Fix temperature regulation misbehavior

There is a particular situation when the cooling device is cpufreq and the heat
dissipation is not efficient enough where the temperature increases little by
little until reaching the critical threshold and leading to a SoC reset.

The behavior is reproducible on a hikey6220 with bad heat dissipation (eg.
stacked with other boards).

Running a simple C program doing while(1); for each CPU of the SoC makes the
temperature to reach the passive regulation trip point and ends up to the
maximum allowed temperature followed by a reset.

This issue has been also reported by running the libhugetlbfs test suite.

What is observed is a ping pong between two cpu frequencies, 1.2GHz and 900MHz
while the temperature continues to grow.

It appears the step wise governor calls get_target_state() the first time with
the throttle set to true and the trend to 'raising'. The code selects logically
the next state, so the cpu frequency decreases from 1.2GHz to 900MHz, so far so
good. The temperature decreases immediately but still stays greater than the
trip point, then get_target_state() is called again, this time with the
throttle set to true *and* the trend to 'dropping'. From there the algorithm
assumes we have to step down the state and the cpu frequency jumps back to
1.2GHz. But the temperature is still higher than the trip point, so
get_target_state() is called with throttle=1 and trend='raising' again, we jump
to 900MHz, then get_target_state() is called with throttle=1 and
trend='dropping', we jump to 1.2GHz, etc ... but the temperature does not
stabilizes and continues to increase.

[  237.922654] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[  237.922678] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[  237.922690] thermal cooling_device0: cur_state=0
[  237.922701] thermal cooling_device0: old_target=0, target=1
[  238.026656] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[  238.026680] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1
[  238.026694] thermal cooling_device0: cur_state=1
[  238.026707] thermal cooling_device0: old_target=1, target=0
[  238.134647] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[  238.134667] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[  238.134679] thermal cooling_device0: cur_state=0
[  238.134690] thermal cooling_device0: old_target=0, target=1

In this situation the temperature continues to increase while the trend is
oscillating between 'dropping' and 'raising'. We need to keep the current state
untouched if the throttle is set, so the temperature can decrease or a higher
state could be selected, thus preventing this oscillation.

Keeping the next_target untouched when 'throttle' is true at 'dropping' time
fixes the issue.

The following traces show the governor does not change the next state if
trend==2 (dropping) and throttle==1.

[ 2306.127987] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2306.128009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 2306.128021] thermal cooling_device0: cur_state=0
[ 2306.128031] thermal cooling_device0: old_target=0, target=1
[ 2306.231991] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2306.232016] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=1
[ 2306.232030] thermal cooling_device0: cur_state=1
[ 2306.232042] thermal cooling_device0: old_target=1, target=1
[ 2306.335982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2306.336006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=1
[ 2306.336021] thermal cooling_device0: cur_state=1
[ 2306.336034] thermal cooling_device0: old_target=1, target=1
[ 2306.439984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2306.440008] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0
[ 2306.440022] thermal cooling_device0: cur_state=1
[ 2306.440034] thermal cooling_device0: old_target=1, target=0

[ ... ]

After a while, if the temperature continues to increase, the next state becomes
2 which is 720MHz on the hikey. That results in the temperature stabilizing
around the trip point.

[ 2455.831982] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2455.832006] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=0
[ 2455.832019] thermal cooling_device0: cur_state=1
[ 2455.832032] thermal cooling_device0: old_target=1, target=1
[ 2455.935985] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2455.936013] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0
[ 2455.936027] thermal cooling_device0: cur_state=1
[ 2455.936040] thermal cooling_device0: old_target=1, target=1
[ 2456.043984] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=0,throttle=1
[ 2456.044009] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=0,throttle=0
[ 2456.044023] thermal cooling_device0: cur_state=1
[ 2456.044036] thermal cooling_device0: old_target=1, target=1
[ 2456.148001] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=1,throttle=1
[ 2456.148028] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=1,throttle=1
[ 2456.148042] thermal cooling_device0: cur_state=1
[ 2456.148055] thermal cooling_device0: old_target=1, target=2
[ 2456.252009] thermal thermal_zone0: Trip0[type=1,temp=65000]:trend=2,throttle=1
[ 2456.252041] thermal thermal_zone0: Trip1[type=1,temp=75000]:trend=2,throttle=0
[ 2456.252058] thermal cooling_device0: cur_state=2
[ 2456.252075] thermal cooling_device0: old_target=2, target=1

IOW, this change is needed to keep the state for a cooling device if the
temperature trend is oscillating while the temperature increases slightly.

Without this change, the situation above leads to a catastrophic crash by a
hardware reset on hikey. This issue has been reported to happen on an OMAP
dra7xx also.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Leo Yan <leo.yan@linaro.org>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Use round up step value
Kevin Wangtao [Thu, 19 Oct 2017 17:05:57 +0000 (19:05 +0200)]
thermal/drivers/hisi: Use round up step value

Use round up division to ensure the programmed value of threshold and the lag
are not less than what we set, and in order to keep the accuracy while using
round up division, the step value should be a rounded up value.  There is
no need to use hisi_thermal_round_temp.

Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Move the clk setup in the corresponding functions
Kevin Wangtao [Thu, 19 Oct 2017 17:05:56 +0000 (19:05 +0200)]
thermal/drivers/hisi: Move the clk setup in the corresponding functions

The sensor's clock is enabled and disabled outside of the probe and
disable function. Moving the corresponding action in the
hisi_thermal_setup() and hisi_thermal_disable_sensor(), factors out
some lines of code and makes the code more symmetric.

Signed-off-by: Kevin Wangtao <kevin.wangtao@linaro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@linaro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Remove mutex_lock in the code
Daniel Lezcano [Thu, 19 Oct 2017 17:05:55 +0000 (19:05 +0200)]
thermal/drivers/hisi: Remove mutex_lock in the code

The mutex is used to protect against writes in the configuration register.

That happens at probe time, with no possible race yet.

Then when the module is unloaded and at suspend/resume.

When the module is unloaded, it is an userspace operation, thus via a process.
Suspending the system goes through the freezer to suspend all the tasks
synchronously before continuing. So it is not possible to hit the suspend ops
in this driver while we are unloading it.

The resume is the same situation than the probe.

In other words, even if there are several places where we write the
configuration register, there is no situation where we can write it at the same
time, so far as I can judge

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Remove thermal data back pointer
Daniel Lezcano [Thu, 19 Oct 2017 17:05:54 +0000 (19:05 +0200)]
thermal/drivers/hisi: Remove thermal data back pointer

The presence of the thermal data pointer in the sensor structure has the unique
purpose of accessing the thermal data in the interrupt handler.

The sensor pointer is passed when registering the interrupt handler, replace the
cookie by the thermal data pointer, so the back pointer is no longer needed.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Convert long to int
Daniel Lezcano [Thu, 19 Oct 2017 17:05:53 +0000 (19:05 +0200)]
thermal/drivers/hisi: Convert long to int

There is no point to specify the temperature as long variable, the int is
enough.

Replace all long variables to int, so making the code consistent.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Rename and remove unused field
Daniel Lezcano [Thu, 19 Oct 2017 17:05:52 +0000 (19:05 +0200)]
thermal/drivers/hisi: Rename and remove unused field

Rename the 'sensors' field to 'sensor' as we describe only one sensor.
Remove the 'sensor_temp' as it is no longer used.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Remove costly sensor inspection
Daniel Lezcano [Thu, 19 Oct 2017 17:05:51 +0000 (19:05 +0200)]
thermal/drivers/hisi: Remove costly sensor inspection

The sensor is all setup, bind, resetted, acked, etc... every single second.

That was the way to workaround a problem with the interrupt bouncing again and
again.

With the following changes, we fix all in one:

 - Do the setup, one time, at probe time

 - Add the IRQF_ONESHOT, ack the interrupt in the threaded handler

 - Remove the interrupt handler

 - Set the correct value for the LAG register

 - Remove all the irq_enabled stuff in the code as the interruption
   handling is fixed

 - Remove the 3ms delay

 - Reorder the initialization routine to be in the right order

It ends up to a nicer code and more efficient, the 3-5ms delay is removed from
the get_temp() path.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Fix configuration register setting
Daniel Lezcano [Thu, 19 Oct 2017 17:05:50 +0000 (19:05 +0200)]
thermal/drivers/hisi: Fix configuration register setting

The TEMP0_CFG configuration register contains different field to set up the
temperature controller. However in the code, nothing prevents a setup to
overwrite the previous one: eg. writing the hdak value overwrites the sensor
selection, the sensor selection overwrites the hdak value.

In order to prevent such thing, use a regmap-like mechanism by reading the
value before, set the corresponding bits and write the result.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Encapsulate register writes into helpers
Daniel Lezcano [Thu, 19 Oct 2017 17:05:49 +0000 (19:05 +0200)]
thermal/drivers/hisi: Encapsulate register writes into helpers

Hopefully, the function name can help to clarify the semantic of the operations
when writing in the register.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Remove pointless lock
Daniel Lezcano [Thu, 19 Oct 2017 17:05:48 +0000 (19:05 +0200)]
thermal/drivers/hisi: Remove pointless lock

The threaded interrupt inspect the sensors structure to look in the temp
threshold field, but this field is read-only in all the code, except in the
probe function before the threaded interrupt is set. In other words there
is not race window in the threaded interrupt when reading the field value.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Fix multiple alarm interrupts firing
Daniel Lezcano [Thu, 19 Oct 2017 17:05:47 +0000 (19:05 +0200)]
thermal/drivers/hisi: Fix multiple alarm interrupts firing

The DT specifies a threshold of 65000, we setup the register with a value in
the temperature resolution for the controller, 64656.

When we reach 64656, the interrupt fires, the interrupt is disabled. Then the
irq thread runs and calls thermal_zone_device_update() which will call in turn
hisi_thermal_get_temp().

The function will look if the temperature decreased, assuming it was more than
65000, but that is not the case because the current temperature is 64656
(because of the rounding when setting the threshold). This condition being
true, we re-enable the interrupt which fires immediately after exiting the irq
thread. That happens again and again until the temperature goes to more than
65000.

Potentially, there is here an interrupt storm if the temperature stabilizes at
this temperature. A very unlikely case but possible.

In any case, it does not make sense to handle dozens of alarm interrupt for
nothing.

Fix this by rounding the threshold value to the controller resolution so the
check against the threshold is consistent with the one set in the controller.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Simplify the temperature/step computation
Daniel Lezcano [Thu, 19 Oct 2017 17:05:46 +0000 (19:05 +0200)]
thermal/drivers/hisi: Simplify the temperature/step computation

The step and the base temperature are fixed values, we can simplify the
computation by converting the base temperature to milli celsius and use a
pre-computed step value. That saves us a lot of mult + div for nothing at
runtime.

Take also the opportunity to change the function names to be consistent with
the rest of the code.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Fix kernel panic on alarm interrupt
Daniel Lezcano [Thu, 19 Oct 2017 17:05:45 +0000 (19:05 +0200)]
thermal/drivers/hisi: Fix kernel panic on alarm interrupt

The threaded interrupt for the alarm interrupt is requested before the
temperature controller is setup. This one can fire an interrupt immediately
leading to a kernel panic as the sensor data is not initialized.

In order to prevent that, move the threaded irq after the Tsensor is setup.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Remove the multiple sensors support
Daniel Lezcano [Thu, 19 Oct 2017 17:05:44 +0000 (19:05 +0200)]
thermal/drivers/hisi: Remove the multiple sensors support

By essence, the tsensor does not really support multiple sensor at the same
time. It allows to set a sensor and use it to get the temperature, another
sensor could be switched but with a delay of 3-5ms. It is difficult to read
simultaneously several sensors without a big delay.

Today, just one sensor is used, it is not necessary to deal with multiple
sensors in the code. Remove them and if it is needed in the future add them
on top of a code which will be clean up in the meantime.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Wangtao (Kevin, Kirin) <kevin.wangtao@hisilicon.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal/drivers/hisi: Fix missing interrupt enablement
Daniel Lezcano [Thu, 19 Oct 2017 17:05:43 +0000 (19:05 +0200)]
thermal/drivers/hisi: Fix missing interrupt enablement

The interrupt for the temperature threshold is not enabled at the end of the
probe function, enable it after the setup is complete.

On the other side, the irq_enabled is not correctly set as we are checking if
the interrupt is masked where 'yes' means irq_enabled=false.

irq_get_irqchip_state(data->irq, IRQCHIP_STATE_MASKED,
&data->irq_enabled);

As we are always enabling the interrupt, it is pointless to check if
the interrupt is masked or not, just set irq_enabled to 'true'.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal: ti-soc-thermal: Fix ti_thermal_unregister_cpu_cooling NULL pointer on unload
Tony Lindgren [Mon, 16 Oct 2017 21:07:14 +0000 (14:07 -0700)]
thermal: ti-soc-thermal: Fix ti_thermal_unregister_cpu_cooling NULL pointer on unload

While debugging some PM issues and trying to remove all the loaded modules, I ran
across the following when unloading ti-soc-thermal:

Unable to handle kernel NULL pointer dereference at virtual address 000000b4
...
[<c08db340>] (kobject_put) from [<bf28954c>] (ti_thermal_unregister_cpu_cooling+0x20/0x28 [ti_soc_thermal])
[<bf28954c>] (ti_thermal_unregister_cpu_cooling [ti_soc_thermal]) from [<bf287c88>] (ti_bandgap_remove+0x3c/0x104 [ti_soc_thermal])
[<bf287c88>] (ti_bandgap_remove [ti_soc_thermal]) from [<c0610d48>] (platform_drv_remove+0x24/0x3c)
[<c0610d48>] (platform_drv_remove) from [<c060f114>] (device_release_driver_internal+0x160/0x208)
[<c060f114>] (device_release_driver_internal) from [<c060f200>] (driver_detach+0x38/0x6c)
[<c060f200>] (driver_detach) from [<c060e2d4>] (bus_remove_driver+0x4c/0xa0)
[<c060e2d4>] (bus_remove_driver) from [<c01f2370>] (SyS_delete_module+0x168/0x238)
[<c01f2370>] (SyS_delete_module) from [<c0108240>] (ret_fast_syscall+0x0/0x28)

Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal: rcar_gen3_thermal: fix initialization sequence for H3 ES2.0
Niklas Söderlund [Tue, 17 Oct 2017 11:36:13 +0000 (13:36 +0200)]
thermal: rcar_gen3_thermal: fix initialization sequence for H3 ES2.0

The initialization sequence for H3 (r8a7795) ES1.x and ES2.0 is
different. H3 ES2.0 and later uses the same sequence as M3 (r8a7796)
ES1.0. Fix this by not looking at compatible strings and instead
defaulting to the r8a7796 initialization sequence and use
soc_device_match() to check for H3 ES1.x.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal: armada: fix formula documentation comment
Baruch Siach [Thu, 14 Sep 2017 15:06:57 +0000 (18:06 +0300)]
thermal: armada: fix formula documentation comment

The formula implementation at armada_get_temp() indicates that the sign
in the formula is inverted.

Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal: tegra: remove null check for dev pointer
Nicolin Chen [Tue, 5 Sep 2017 07:41:16 +0000 (00:41 -0700)]
thermal: tegra: remove null check for dev pointer

The dev pointer is going through a null check after a dereference.
So this patch removes that useless check since the driver does not
pass a null dev pointer in any case.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal: enable broadcom menu for arm64 bcm2835
Allen Wild [Tue, 26 Sep 2017 17:37:44 +0000 (19:37 +0200)]
thermal: enable broadcom menu for arm64 bcm2835

Moving the bcm2835 thermal driver to the broadcom directory prevented it
from getting enabled for arm64 builds, since the broadcom directory is only
available when 32-bit specific ARCH_BCM is set.

Fix this by enabling the Broadcom menu for ARCH_BCM or ARCH_BCM2835.

Fixes: 6892cf07e733 ("thermal: bcm2835: move to the broadcom subdirectory")
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Allen Wild <allenwild93@gmail.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal: rockchip: Support the RV1108 SoC in thermal driver
Rocky Hao [Thu, 24 Aug 2017 10:27:52 +0000 (18:27 +0800)]
thermal: rockchip: Support the RV1108 SoC in thermal driver

RV1108 SOC has one Temperature Sensor for CPU.

Reviewed-by: Caesar Wang <wxt@rock-chips.com>
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agodt-bindings: rockchip-thermal: Support the RV1108 SoC compatible
Rocky Hao [Thu, 24 Aug 2017 10:27:51 +0000 (18:27 +0800)]
dt-bindings: rockchip-thermal: Support the RV1108 SoC compatible

Add a new compatible for thermal founding on RV1108 SoCs.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
4 years agothermal: imx: add NVMEM dependency
Arnd Bergmann [Mon, 18 Sep 2017 20:48:16 +0000 (22:48 +0200)]
thermal: imx: add NVMEM dependency

The driver now fails to link into vmlinux when CONFIG_NVMEM is a loadable
module:

drivers/thermal/imx_thermal.o: In function `imx_thermal_probe':
imx_thermal.c:(.text+0x360): undefined reference to `nvmem_cell_read_u32'
imx_thermal.c:(.text+0x360): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nvmem_cell_read_u32'
imx_thermal.c:(.text+0x388): undefined reference to `nvmem_cell_read_u32'
imx_thermal.c:(.text+0x388): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `nvmem_cell_read_u32'

This adds a Kconfig dependency to force it to be a module as well
when its dependency is loadable.

Fixes: 7fe5ba04fcdc ("thermal: imx: Add support for reading OCOTP through nvmem")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agotools/thermal: tmon: use $(PKG_CONFIG) instead of hard-coding pkg-config
Markus Mayer [Wed, 27 Sep 2017 23:02:37 +0000 (16:02 -0700)]
tools/thermal: tmon: use $(PKG_CONFIG) instead of hard-coding pkg-config

To ease cross-compiling, make use of the $(PKG_CONFIG) variable rather
than hard-coding calls to pkg-config.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agotools/thermal: tmon: allow $(CC) to be defined externally
Markus Mayer [Wed, 27 Sep 2017 23:02:36 +0000 (16:02 -0700)]
tools/thermal: tmon: allow $(CC) to be defined externally

It can be helpful, especially when using a build system, to set the C
compiler externally.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agotools/thermal: tmon: use "-fstack-protector" only if supported
Markus Mayer [Wed, 27 Sep 2017 23:02:35 +0000 (16:02 -0700)]
tools/thermal: tmon: use "-fstack-protector" only if supported

Most, but not all, toolchains support the "-fstack-protector" flag. We
check if the compiler supports the flag before using it. This allows
tmon to be compiled for more environments.

Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agothermal/intel_powerclamp: pr_err()/pr_info() strings should end with newlines
Arvind Yadav [Mon, 9 Oct 2017 11:51:07 +0000 (17:21 +0530)]
thermal/intel_powerclamp: pr_err()/pr_info() strings should end with newlines

pr_err()/pr_info() messages should end with a new-line to avoid
other messages being concatenated.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agothermal : Remove const to make same prototype
Arvind Yadav [Thu, 31 Aug 2017 06:00:45 +0000 (11:30 +0530)]
thermal : Remove const to make same prototype

Here, prototype of thermal_zone_device_register is not matching
with static inline thermal_zone_device_register. One is using
const thermal_zone_params. Other is using non-const.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agothermal: imx: Add support for reading OCOTP through nvmem
Leonard Crestez [Fri, 14 Jul 2017 14:11:08 +0000 (17:11 +0300)]
thermal: imx: Add support for reading OCOTP through nvmem

On newer imx SOCs accessing OCOTP directly is wrong because the ocotp
clock needs to be enabled first. Add support for reading those same
values through the nvmem API instead.

The older path is preserved for compatibility with older dts and because
it works correctly on imx6qdl chips.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agothermal: imx: Add nvmem-cells alternate binding for OCOTP access
Leonard Crestez [Fri, 14 Jul 2017 14:11:06 +0000 (17:11 +0300)]
thermal: imx: Add nvmem-cells alternate binding for OCOTP access

On newer imx SOCs accessing OCOTP directly is wrong because the ocotp
clock needs to be enabled first. Add a binding for accessing the same
values through the imx-ocotp nvmem driver using nvmem-cells. This is
similar to other thermal drivers.

The old binding is preserved for compatibility and because it still
works fine on imx6qdl series chips.

In theory this problem could be solved by adding a reference to the
OCOTP clock instead but it is better to hide such details in a specific
nvmem driver.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
4 years agoLinux 4.14-rc1 v4.14-rc1
Linus Torvalds [Sat, 16 Sep 2017 22:47:51 +0000 (15:47 -0700)]
Linux 4.14-rc1

4 years agoMerge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Sat, 16 Sep 2017 19:08:10 +0000 (12:08 -0700)]
Merge tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs

Pull UBI updates from Richard Weinberger:
 "Minor improvements"

* tag 'upstream-4.14-rc1' of git://git.infradead.org/linux-ubifs:
  UBI: Fix two typos in comments
  ubi: fastmap: fix spelling mistake: "invalidiate" -> "invalidate"
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines
  ubi: pr_err() strings should end with newlines

4 years agoMerge branch 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 16 Sep 2017 19:03:25 +0000 (12:03 -0700)]
Merge branch 'for-linus-4.14-rc1' of git://git./linux/kernel/git/rw/uml

Pull UML updates from Richard Weinberger:

 - minor improvements

 - fixes for Debian's new gcc defaults (pie enabled by default)

 - fixes for XSTATE/XSAVE to make UML work again on modern systems

* 'for-linus-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
  um: return negative in tuntap_open_tramp()
  um: remove a stray tab
  um: Use relative modversions with LD_SCRIPT_DYN
  um: link vmlinux with -no-pie
  um: Fix CONFIG_GCOV for modules.
  Fix minor typos and grammar in UML start_up help
  um: defconfig: Cleanup from old Kconfig options
  um: Fix FP register size for XSTATE/XSAVE

4 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Sat, 16 Sep 2017 18:28:59 +0000 (11:28 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Fix hotplug deadlock in hv_netvsc, from Stephen Hemminger.

 2) Fix double-free in rmnet driver, from Dan Carpenter.

 3) INET connection socket layer can double put request sockets, fix
    from Eric Dumazet.

 4) Don't match collect metadata-mode tunnels if the device is down,
    from Haishuang Yan.

 5) Do not perform TSO6/GSO on ipv6 packets with extensions headers in
    be2net driver, from Suresh Reddy.

 6) Fix scaling error in gen_estimator, from Eric Dumazet.

 7) Fix 64-bit statistics deadlock in systemport driver, from Florian
    Fainelli.

 8) Fix use-after-free in sctp_sock_dump, from Xin Long.

 9) Reject invalid BPF_END instructions in verifier, from Edward Cree.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits)
  mlxsw: spectrum_router: Only handle IPv4 and IPv6 events
  Documentation: link in networking docs
  tcp: fix data delivery rate
  bpf/verifier: reject BPF_ALU64|BPF_END
  sctp: do not mark sk dumped when inet_sctp_diag_fill returns err
  sctp: fix an use-after-free issue in sctp_sock_dump
  netvsc: increase default receive buffer size
  tcp: update skb->skb_mstamp more carefully
  net: ipv4: fix l3slave check for index returned in IP_PKTINFO
  net: smsc911x: Quieten netif during suspend
  net: systemport: Fix 64-bit stats deadlock
  net: vrf: avoid gcc-4.6 warning
  qed: remove unnecessary call to memset
  tg3: clean up redundant initialization of tnapi
  tls: make tls_sw_free_resources static
  sctp: potential read out of bounds in sctp_ulpevent_type_enabled()
  MAINTAINERS: review Renesas DT bindings as well
  net_sched: gen_estimator: fix scaling error in bytes/packets samples
  nfp: wait for the NSP resource to appear on boot
  nfp: wait for board state before talking to the NSP
  ...

4 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 16 Sep 2017 18:24:26 +0000 (11:24 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull more input updates from Dmitry Torokhov:
 "A second round of updates for the input subsystem:

   - a new driver for PWM-controlled vibrators

   - ucb1400 touchscreen driver had completely busted suspend/resume
     handling

   - we now handle "home" button found on some devices with Goodix
     touchscreens

   - assorted other fixups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - add Gigabyte P57 to the keyboard reset table
  Input: xpad - validate USB endpoint type during probe
  Input: ucb1400_ts - fix suspend and resume handling
  Input: edt-ft5x06 - fix access to non-existing register
  Input: elantech - make arrays debounce_packet static, reduces object code size
  Input: surface3_spi - make const array header static, reduces object code size
  Input: goodix - add support for capacitive home button
  Input: add a driver for PWM controllable vibrators
  Input: adi - make array seq static, reduces object code size

4 years agofirmware: Restore support for built-in firmware
Markus Trippelsdorf [Sat, 16 Sep 2017 09:01:16 +0000 (11:01 +0200)]
firmware: Restore support for built-in firmware

Commit 5620a0d1aac ("firmware: delete in-kernel firmware") removed the
entire firmware directory.  Unfortunately it thereby also removed the
support for built-in firmware.

This restores the ability to build firmware directly into the kernel by
pruning the original Makefile to the necessary minimum.  The default for
EXTRA_FIRMWARE_DIR is now the standard directory /lib/firmware/.

Fixes: 5620a0d1aac ("firmware: delete in-kernel firmware")
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Acked-by: Greg K-H <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agomlxsw: spectrum_router: Only handle IPv4 and IPv6 events
Ido Schimmel [Fri, 15 Sep 2017 13:31:07 +0000 (15:31 +0200)]
mlxsw: spectrum_router: Only handle IPv4 and IPv6 events

The driver doesn't support events from address families other than IPv4
and IPv6, so ignore them. Otherwise, we risk queueing a work item before
it's initialized.

This can happen in case a VRF is configured when MROUTE_MULTIPLE_TABLES
is enabled, as the VRF driver will try to add an l3mdev rule for the
IPMR family.

Fixes: 65e65ec137f4 ("mlxsw: spectrum_router: Don't ignore IPv6 notifications")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Andreas Rammhold <andreas@rammhold.de>
Reported-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoDocumentation: link in networking docs
Pavel Machek [Sat, 16 Sep 2017 14:28:02 +0000 (16:28 +0200)]
Documentation: link in networking docs

Fix link in filter.txt.

Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotcp: fix data delivery rate
Eric Dumazet [Fri, 15 Sep 2017 23:47:42 +0000 (16:47 -0700)]
tcp: fix data delivery rate

Now skb->mstamp_skb is updated later, we also need to call
tcp_rate_skb_sent() after the update is done.

Fixes: 8c72c65b426b ("tcp: update skb->skb_mstamp more carefully")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge branch '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Linus Torvalds [Sat, 16 Sep 2017 03:43:33 +0000 (20:43 -0700)]
Merge branch '4.14-features' of git://git.linux-mips.org/ralf/upstream-linus

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 4.14 for MIPS; below a summary of
  the non-merge commits:

  CM:
   - Rename mips_cm_base to mips_gcr_base
   - Specify register size when generating accessors
   - Use BIT/GENMASK for register fields, order & drop shifts
   - Add cluster & block args to mips_cm_lock_other()

  CPC:
   - Use common CPS accessor generation macros
   - Use BIT/GENMASK for register fields, order & drop shifts
   - Introduce register modify (set/clear/change) accessors
   - Use change_*, set_* & clear_* where appropriate
   - Add CM/CPC 3.5 register definitions
   - Use GlobalNumber macros rather than magic numbers
   - Have asm/mips-cps.h include CM & CPC headers
   - Cluster support for topology functions
   - Detect CPUs in secondary clusters

  CPS:
   - Read GIC_VL_IDENT directly, not via irqchip driver

  DMA:
   - Consolidate coherent and non-coherent dma_alloc code
   - Don't use dma_cache_sync to implement fd_cacheflush

  FPU emulation / FP assist code:
   - Another series of 14 commits fixing corner cases such as NaN
     propgagation and other special input values.
   - Zero bits 32-63 of the result for a CLASS.D instruction.
   - Enhanced statics via debugfs
   - Do not use bools for arithmetic. GCC 7.1 moans about this.
   - Correct user fault_addr type

  Generic MIPS:
   - Enhancement of stack backtraces
   - Cleanup from non-existing options
   - Handle non word sized instructions when examining frame
   - Fix detection and decoding of ADDIUSP instruction
   - Fix decoding of SWSP16 instruction
   - Refactor handling of stack pointer in get_frame_info
   - Remove unreachable code from force_fcr31_sig()
   - Convert to using %pOF instead of full_name
   - Remove the R6000 support.
   - Move FP code from *_switch.S to *_fpu.S
   - Remove unused ST_OFF from r2300_switch.S
   - Allow platform to specify multiple its.S files
   - Add #includes to various files to ensure code builds reliable and
     without warning..
   - Remove __invalidate_kernel_vmap_range
   - Remove plat_timer_setup
   - Declare various variables & functions static
   - Abstract CPU core & VP(E) ID access through accessor functions
   - Store core & VP IDs in GlobalNumber-style variable
   - Unify checks for sibling CPUs
   - Add CPU cluster number accessors
   - Prevent direct use of generic_defconfig
   - Make CONFIG_MIPS_MT_SMP default y
   - Add __ioread64_copy
   - Remove unnecessary inclusions of linux/irqchip/mips-gic.h

  GIC:
   - Introduce asm/mips-gic.h with accessor functions
   - Use new GIC accessor functions in mips-gic-timer
   - Remove counter access functions from irq-mips-gic.c
   - Remove gic_read_local_vp_id() from irq-mips-gic.c
   - Simplify shared interrupt pending/mask reads in irq-mips-gic.c
   - Simplify gic_local_irq_domain_map() in irq-mips-gic.c
   - Drop gic_(re)set_mask() functions in irq-mips-gic.c
   - Remove gic_set_polarity(), gic_set_trigger(), gic_set_dual_edge(),
     gic_map_to_pin() and gic_map_to_vpe() from irq-mips-gic.c.
   - Convert remaining shared reg access, local int mask access and
     remaining local reg access to new accessors
   - Move GIC_LOCAL_INT_* to asm/mips-gic.h
   - Remove GIC_CPU_INT* macros from irq-mips-gic.c
   - Move various definitions to the driver
   - Remove gic_get_usm_range()
   - Remove __gic_irq_dispatch() forward declaration
   - Remove gic_init()
   - Use mips_gic_present() in place of gic_present and remove
     gic_present
   - Move gic_get_c0_*_int() to asm/mips-gic.h
   - Remove linux/irqchip/mips-gic.h
   - Inline __gic_init()
   - Inline gic_basic_init()
   - Make pcpu_masks a per-cpu variable
   - Use pcpu_masks to avoid reading GIC_SH_MASK*
   - Clean up mti, reserved-cpu-vectors handling
   - Use cpumask_first_and() in gic_set_affinity()
   - Let the core set struct irq_common_data affinity

  microMIPS:
   - Fix microMIPS stack unwinding on big endian systems

  MIPS-GIC:
   - SYNC after enabling GIC region

  NUMA:
   - Remove the unused parent_node() macro

  R6:
   - Constify r2_decoder_tables
   - Add accessor & bit definitions for GlobalNumber

  SMP:
   - Constify smp ops
   - Allow boot_secondary SMP op to return errors

  VDSO:
   - Drop gic_get_usm_range() usage
   - Avoid use of linux/irqchip/mips-gic.h

  Platform changes:

  Alchemy:
   - Add devboard machine type to cpuinfo
   - update cpu feature overrides
   - Threaded carddetect irqs for devboards

  AR7:
   - allow NULL clock for clk_get_rate

  BCM63xx:
   - Fix ENETDMA_6345_MAXBURST_REG offset
   - Allow NULL clock for clk_get_rate

  CI20:
   - Enable GPIO and RTC drivers in defconfig
   - Add ethernet and fixed-regulator nodes to DTS

  Generic platform:
   - Move Boston and NI 169445 FIT image source to their own files
   - Include asm/bootinfo.h for plat_fdt_relocated()
   - Include asm/time.h for get_c0_*_int()
   - Include asm/bootinfo.h for plat_fdt_relocated()
   - Include asm/time.h for get_c0_*_int()
   - Allow filtering enabled boards by requirements
   - Don't explicitly disable CONFIG_USB_SUPPORT
   - Bump default NR_CPUS to 16

  JZ4700:
   - Probe the jz4740-rtc driver from devicetree

  Lantiq:
   - Drop check of boot select from the spi-falcon driver.
   - Drop check of boot select from the lantiq-flash MTD driver.
   - Access boot cause register in the watchdog driver through regmap
   - Add device tree binding documentation for the watchdog driver
   - Add docs for the RCU DT bindings.
   - Convert the fpi bus driver to a platform_driver
   - Remove ltq_reset_cause() and ltq_boot_select(
   - Switch to a proper reset driver
   - Switch to a new drivers/soc GPHY driver
   - Add an USB PHY driver for the Lantiq SoCs using the RCU module
   - Use of_platform_default_populate instead of __dt_register_buses
   - Enable MFD_SYSCON to be able to use it for the RCU MFD
   - Replace ltq_boot_select() with dummy implementation.

  Loongson 2F:
   - Allow NULL clock for clk_get_rate

  Malta:
   - Use new GIC accessor functions

  NI 169445:
   - Add support for NI 169445 board.
   - Only include in 32r2el kernels

  Octeon:
   - Add support for watchdog of 78XX SOCs.
   - Add support for watchdog of CN68XX SOCs.
   - Expose support for mips32r1, mips32r2 and mips64r1
   - Enable more drivers in config file
   - Add support for accessing the boot vector.
   - Remove old boot vector code from watchdog driver
   - Define watchdog registers for 70xx, 73xx, 78xx, F75xx.
   - Make CSR functions node aware.
   - Allow access to CIU3 IRQ domains.
   - Misc cleanups in the watchdog driver

  Omega2+:
   - New board, add support and defconfig

  Pistachio:
   - Enable Root FS on NFS in defconfig

  Ralink:
   - Add Mediatek MT7628A SoC
   - Allow NULL clock for clk_get_rate
   - Explicitly request exclusive reset control in the pci-mt7620 PCI driver.

  SEAD3:
   - Only include in 32 bit kernels by default

  VoCore:
   - Add VoCore as a vendor t0 dt-bindings
   - Add defconfig file"

* '4.14-features' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (167 commits)
  MIPS: Refactor handling of stack pointer in get_frame_info
  MIPS: Stacktrace: Fix microMIPS stack unwinding on big endian systems
  MIPS: microMIPS: Fix decoding of swsp16 instruction
  MIPS: microMIPS: Fix decoding of addiusp instruction
  MIPS: microMIPS: Fix detection of addiusp instruction
  MIPS: Handle non word sized instructions when examining frame
  MIPS: ralink: allow NULL clock for clk_get_rate
  MIPS: Loongson 2F: allow NULL clock for clk_get_rate
  MIPS: BCM63XX: allow NULL clock for clk_get_rate
  MIPS: AR7: allow NULL clock for clk_get_rate
  MIPS: BCM63XX: fix ENETDMA_6345_MAXBURST_REG offset
  mips: Save all registers when saving the frame
  MIPS: Add DWARF unwinding to assembly
  MIPS: Make SAVE_SOME more standard
  MIPS: Fix issues in backtraces
  MIPS: jz4780: DTS: Probe the jz4740-rtc driver from devicetree
  MIPS: Ci20: Enable RTC driver
  watchdog: octeon-wdt: Add support for 78XX SOCs.
  watchdog: octeon-wdt: Add support for cn68XX SOCs.
  watchdog: octeon-wdt: File cleaning.
  ...

4 years agoMerge tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
Linus Torvalds [Sat, 16 Sep 2017 03:25:06 +0000 (20:25 -0700)]
Merge tag 'pci-v4.14-fixes-1' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "Revert an attempt to fix a race while enabling upstream bridges
  because it broke iwlwifi firmware loading"

* tag 'pci-v4.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: Avoid race while enabling upstream bridges"

4 years agoMerge tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Sat, 16 Sep 2017 00:52:52 +0000 (17:52 -0700)]
Merge tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux

Pull drm AMD fixes from Dave Airlie:
 "Just had a single AMD fixes pull from Alex for rc1"

* tag 'drm-fixes-for-v4.14-rc1' of git://people.freedesktop.org/~airlied/linux:
  drm/amdgpu: revert "fix deadlock of reservation between cs and gpu reset v2"
  drm/amdgpu: remove duplicate return statement
  drm/amdgpu: check memory allocation failure
  drm/amd/amdgpu: fix BANK_SELECT on Vega10 (v2)
  drm/amdgpu: inline amdgpu_ttm_do_bind again
  drm/amdgpu: fix amdgpu_ttm_bind
  drm/amdgpu: remove the GART copy hack
  drm/ttm:fix wrong decoding of bo_count
  drm/ttm: fix missing inc bo_count
  drm/amdgpu: set sched_hw_submission higher for KIQ (v3)
  drm/amdgpu: move default gart size setting into gmc modules
  drm/amdgpu: refine default gart size
  drm/amd/powerplay: ACG frequency added in PPTable
  drm/amdgpu: discard commands of killed processes
  drm/amdgpu: fix and cleanup shadow handling
  drm/amdgpu: add automatic per asic settings for gart_size
  drm/amdgpu/gfx8: fix spelling typo in mqd allocation
  drm/amd/powerplay: unhalt mec after loading
  drm/amdgpu/virtual_dce: Virtual display doesn't support disable vblank immediately
  drm/amdgpu: Fix huge page updates with CPU

4 years agoMerge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa...
Linus Torvalds [Sat, 16 Sep 2017 00:49:46 +0000 (17:49 -0700)]
Merge branch 'i2c/for-next' of git://git./linux/kernel/git/wsa/linux

Pull more i2c updates from Wolfram Sang:
 "I2C has two more new drivers: Altera FPGA and STM32F7"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i2c-stm32f7: add driver
  i2c: i2c-stm32f4: use generic definition of speed enum
  dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings
  i2c: altera: Add Altera I2C Controller driver
  dt-bindings: i2c: Add Altera I2C Controller

4 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Fri, 15 Sep 2017 22:43:55 +0000 (15:43 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull more KVM updates from Paolo Bonzini:
 - PPC bugfixes
 - RCU splat fix
 - swait races fix
 - pointless userspace-triggerable BUG() fix
 - misc fixes for KVM_RUN corner cases
 - nested virt correctness fixes + one host DoS
 - some cleanups
 - clang build fix
 - fix AMD AVIC with default QEMU command line options
 - x86 bugfixes

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
  kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly
  kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly
  kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry
  kvm,mips: Fix potential swait_active() races
  kvm,powerpc: Serialize wq active checks in ops->vcpu_kick
  kvm: Serialize wq active checks in kvm_vcpu_wake_up()
  kvm,x86: Fix apf_task_wake_one() wq serialization
  kvm,lapic: Justify use of swait_active()
  kvm,async_pf: Use swq_has_sleeper()
  sched/wait: Add swq_has_sleeper()
  KVM: VMX: Do not BUG() on out-of-bounds guest IRQ
  KVM: Don't accept obviously wrong gsi values via KVM_IRQFD
  kvm: nVMX: Don't allow L2 to access the hardware CR8
  KVM: trace events: update list of exit reasons
  KVM: async_pf: Fix #DF due to inject "Page not Present" and "Page Ready" exceptions simultaneously
  KVM: X86: Don't block vCPU if there is pending exception
  KVM: SVM: Add irqchip_split() checks before enabling AVIC
  KVM: Add struct kvm_vcpu pointer parameter to get_enable_apicv()
  KVM: SVM: Refactor AVIC vcpu initialization into avic_init_vcpu()
  KVM: x86: fix clang build
  ...

4 years agobpf/verifier: reject BPF_ALU64|BPF_END
Edward Cree [Fri, 15 Sep 2017 13:37:38 +0000 (14:37 +0100)]
bpf/verifier: reject BPF_ALU64|BPF_END

Neither ___bpf_prog_run nor the JITs accept it.
Also adds a new test case.

Fixes: 17a5267067f3 ("bpf: verifier (add verifier core)")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agosctp: do not mark sk dumped when inet_sctp_diag_fill returns err
Xin Long [Fri, 15 Sep 2017 03:02:48 +0000 (11:02 +0800)]
sctp: do not mark sk dumped when inet_sctp_diag_fill returns err

sctp_diag would not actually dump out sk/asoc if inet_sctp_diag_fill
returns err, in which case it shouldn't mark sk dumped by setting
cb->args[3] as 1 in sctp_sock_dump().

Otherwise, it could cause some asocs to have no parent's sk dumped
in 'ss --sctp'.

So this patch is to not set cb->args[3] when inet_sctp_diag_fill()
returns err in sctp_sock_dump().

Fixes: 8f840e47f190 ("sctp: add the sctp_diag.c file")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agosctp: fix an use-after-free issue in sctp_sock_dump
Xin Long [Fri, 15 Sep 2017 03:02:21 +0000 (11:02 +0800)]
sctp: fix an use-after-free issue in sctp_sock_dump

Commit 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the
dump") tried to fix an use-after-free issue by checking !sctp_sk(sk)->ep
with holding sock and sock lock.

But Paolo noticed that endpoint could be destroyed in sctp_rcv without
sock lock protection. It means the use-after-free issue still could be
triggered when sctp_rcv put and destroy ep after sctp_sock_dump checks
!ep, although it's pretty hard to reproduce.

I could reproduce it by mdelay in sctp_rcv while msleep in sctp_close
and sctp_sock_dump long time.

This patch is to add another param cb_done to sctp_for_each_transport
and dump ep->assocs with holding tsp after jumping out of transport's
traversal in it to avoid this issue.

It can also improve sctp diag dump to make it run faster, as no need
to save sk into cb->args[5] and keep calling sctp_for_each_transport
any more.

This patch is also to use int * instead of int for the pos argument
in sctp_for_each_transport, which could make postion increment only
in sctp_for_each_transport and no need to keep changing cb->args[2]
in sctp_sock_filter and sctp_sock_dump any more.

Fixes: 86fdb3448cc1 ("sctp: ensure ep is not destroyed before doing the dump")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonetvsc: increase default receive buffer size
Stephen Hemminger [Thu, 14 Sep 2017 16:31:07 +0000 (09:31 -0700)]
netvsc: increase default receive buffer size

The default receive buffer size was reduced by recent change
to a value which was appropriate for 10G and Windows Server 2016.
But the value is too small for full performance with 40G on Azure.
Increase the default back to maximum supported by host.

Fixes: 8b5327975ae1 ("netvsc: allow controlling send/recv buffer size")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agotcp: update skb->skb_mstamp more carefully
Eric Dumazet [Thu, 14 Sep 2017 03:30:39 +0000 (20:30 -0700)]
tcp: update skb->skb_mstamp more carefully

liujian reported a problem in TCP_USER_TIMEOUT processing with a patch
in tcp_probe_timer() :
      https://www.spinics.net/lists/netdev/msg454496.html

After investigations, the root cause of the problem is that we update
skb->skb_mstamp of skbs in write queue, even if the attempt to send a
clone or copy of it failed. One reason being a routing problem.

This patch prevents this, solving liujian issue.

It also removes a potential RTT miscalculation, since
__tcp_retransmit_skb() is not OR-ing TCP_SKB_CB(skb)->sacked with
TCPCB_EVER_RETRANS if a failure happens, but skb->skb_mstamp has
been changed.

A future ACK would then lead to a very small RTT sample and min_rtt
would then be lowered to this too small value.

Tested:

# cat user_timeout.pkt
--local_ip=192.168.102.64

    0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
   +0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
   +0 bind(3, ..., ...) = 0
   +0 listen(3, 1) = 0

   +0 `ifconfig tun0 192.168.102.64/16; ip ro add 192.0.2.1 dev tun0`

   +0 < S 0:0(0) win 0 <mss 1460>
   +0 > S. 0:0(0) ack 1 <mss 1460>

  +.1 < . 1:1(0) ack 1 win 65530
   +0 accept(3, ..., ...) = 4

   +0 setsockopt(4, SOL_TCP, TCP_USER_TIMEOUT, [3000], 4) = 0
   +0 write(4, ..., 24) = 24
   +0 > P. 1:25(24) ack 1 win 29200
   +.1 < . 1:1(0) ack 25 win 65530

//change the ipaddress
   +1 `ifconfig tun0 192.168.0.10/16`

   +1 write(4, ..., 24) = 24
   +1 write(4, ..., 24) = 24
   +1 write(4, ..., 24) = 24
   +1 write(4, ..., 24) = 24

   +0 `ifconfig tun0 192.168.102.64/16`
   +0 < . 1:2(1) ack 25 win 65530
   +0 `ifconfig tun0 192.168.0.10/16`

   +3 write(4, ..., 24) = -1

# ./packetdrill user_timeout.pkt

Signed-off-by: Eric Dumazet <edumazet@googl.com>
Reported-by: liujian <liujian56@huawei.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: ipv4: fix l3slave check for index returned in IP_PKTINFO
David Ahern [Thu, 14 Sep 2017 00:11:37 +0000 (17:11 -0700)]
net: ipv4: fix l3slave check for index returned in IP_PKTINFO

rt_iif is only set to the actual egress device for the output path. The
recent change to consider the l3slave flag when returning IP_PKTINFO
works for local traffic (the correct device index is returned), but it
broke the more typical use case of packets received from a remote host
always returning the VRF index rather than the original ingress device.
Update the fixup to consider l3slave and rt_iif actually getting set.

Fixes: 1dfa76390bf05 ("net: ipv4: add check for l3slave for index returned in IP_PKTINFO")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: smsc911x: Quieten netif during suspend
Geert Uytterhoeven [Wed, 13 Sep 2017 17:42:05 +0000 (19:42 +0200)]
net: smsc911x: Quieten netif during suspend

If the network interface is kept running during suspend, the net core
may call net_device_ops.ndo_start_xmit() while the Ethernet device is
still suspended, which may lead to a system crash.

E.g. on sh73a0/kzm9g and r8a73a4/ape6evm, the external Ethernet chip is
driven by a PM controlled clock.  If the Ethernet registers are accessed
while the clock is not running, the system will crash with an imprecise
external abort.

As this is a race condition with a small time window, it is not so easy
to trigger at will.  Using pm_test may increase your chances:

    # echo 0 > /sys/module/printk/parameters/console_suspend
    # echo platform > /sys/power/pm_test
    # echo mem > /sys/power/state

To fix this, make sure the network interface is quietened during
suspend.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: systemport: Fix 64-bit stats deadlock
Florian Fainelli [Tue, 12 Sep 2017 20:14:26 +0000 (13:14 -0700)]
net: systemport: Fix 64-bit stats deadlock

We can enter a deadlock situation because there is no sufficient protection
when ndo_get_stats64() runs in process context to guard against RX or TX NAPI
contexts running in softirq, this can lead to the following lockdep splat and
actual deadlock was experienced as well with an iperf session in the background
and a while loop doing ifconfig + ethtool.

[    5.780350] ================================
[    5.784679] WARNING: inconsistent lock state
[    5.789011] 4.13.0-rc7-02179-g32fae27c725d #70 Not tainted
[    5.794561] --------------------------------
[    5.798890] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage.
[    5.804971] swapper/0/0 [HC0[0]:SC1[1]:HE0:SE0] takes:
[    5.810175]  (&syncp->seq#2){+.?...}, at: [<c0768a28>] bcm_sysport_tx_reclaim+0x30/0x54
[    5.818327] {SOFTIRQ-ON-W} state was registered at:
[    5.823278]   bcm_sysport_get_stats64+0x17c/0x258
[    5.828053]   dev_get_stats+0x38/0xac
[    5.831776]   rtnl_fill_stats+0x30/0x118
[    5.835761]   rtnl_fill_ifinfo+0x538/0xe24
[    5.839921]   rtmsg_ifinfo_build_skb+0x6c/0xd8
[    5.844430]   rtmsg_ifinfo_event.part.5+0x14/0x44
[    5.849201]   rtmsg_ifinfo+0x20/0x28
[    5.852837]   register_netdevice+0x628/0x6b8
[    5.857171]   register_netdev+0x14/0x24
[    5.861051]   bcm_sysport_probe+0x30c/0x438
[    5.865280]   platform_drv_probe+0x50/0xb0
[    5.869418]   driver_probe_device+0x2e8/0x450
[    5.873817]   __driver_attach+0x104/0x120
[    5.877871]   bus_for_each_dev+0x7c/0xc0
[    5.881834]   bus_add_driver+0x1b0/0x270
[    5.885797]   driver_register+0x78/0xf4
[    5.889675]   do_one_initcall+0x54/0x190
[    5.893646]   kernel_init_freeable+0x144/0x1d0
[    5.898135]   kernel_init+0x8/0x110
[    5.901665]   ret_from_fork+0x14/0x2c
[    5.905363] irq event stamp: 24263
[    5.908804] hardirqs last  enabled at (24262): [<c08eecf0>] net_rx_action+0xc4/0x4e4
[    5.916624] hardirqs last disabled at (24263): [<c0a7da00>] _raw_spin_lock_irqsave+0x1c/0x98
[    5.925143] softirqs last  enabled at (24258): [<c022a7fc>] irq_enter+0x84/0x98
[    5.932524] softirqs last disabled at (24259): [<c022a918>] irq_exit+0x108/0x16c
[    5.939985]
[    5.939985] other info that might help us debug this:
[    5.946576]  Possible unsafe locking scenario:
[    5.946576]
[    5.952556]        CPU0
[    5.955031]        ----
[    5.957506]   lock(&syncp->seq#2);
[    5.960955]   <Interrupt>
[    5.963604]     lock(&syncp->seq#2);
[    5.967227]
[    5.967227]  *** DEADLOCK ***
[    5.967227]
[    5.973222] 1 lock held by swapper/0/0:
[    5.977092]  #0:  (&(&ring->lock)->rlock){..-...}, at: [<c0768a18>] bcm_sysport_tx_reclaim+0x20/0x54

So just remove the u64_stats_update_begin()/end() pair in ndo_get_stats64()
since it does not appear to be useful for anything. No inconsistency was
observed with either ifconfig or ethtool, global TX counts equal the sum of
per-queue TX counts on a 32-bit architecture.

Fixes: 10377ba7673d ("net: systemport: Support 64bit statistics")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agonet: vrf: avoid gcc-4.6 warning
Arnd Bergmann [Tue, 12 Sep 2017 20:10:53 +0000 (22:10 +0200)]
net: vrf: avoid gcc-4.6 warning

When building an allmodconfig kernel with gcc-4.6, we get a rather
odd warning:

drivers/net/vrf.c: In function ‘vrf_ip6_input_dst’:
drivers/net/vrf.c:964:3: error: initialized field with side-effects overwritten [-Werror]
drivers/net/vrf.c:964:3: error: (near initialization for ‘fl6’) [-Werror]

I have no idea what this warning is even trying to say, but it does
seem like a false positive. Reordering the initialization in to match
the structure definition gets rid of the warning, and might also avoid
whatever gcc thinks is wrong here.

Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoqed: remove unnecessary call to memset
Himanshu Jha [Tue, 12 Sep 2017 11:19:22 +0000 (16:49 +0530)]
qed: remove unnecessary call to memset

call to memset to assign 0 value immediately after allocating
memory with kzalloc is unnecesaary as kzalloc allocates the memory
filled with 0 value.

Semantic patch used to resolve this issue:

@@
expression e,e2; constant c;
statement S;
@@

  e = kzalloc(e2, c);
  if(e == NULL) S
- memset(e, 0, e2);

Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Acked-by: Sudarsana Kalluru <sudarsana.kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
4 years agoMerge tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 15 Sep 2017 19:58:55 +0000 (12:58 -0700)]
Merge tag 'firmware_removal-4.14-rc1' of git://git./linux/kernel/git/gregkh/driver-core

Pull firmware removal from Greg KH:
 "Many many years ago (at the kernel summit in Boston), we all came to
  the agreement that the firmware/ tree should be dropped from the
  kernel, and everyone use the linux-firmware package instead. For some
  minor reason, David Woodhouse didn't send the pull request at that
  point in time, and everyone forgot about this.

  The topic came up in the hallway track at the Plumbers conference this
  week, so here's a single patch that drops the whole firmware tree. The
  last firmware update was back in 2013, and all distros have been using
  linux-firmware instead since at least that year, if not before. The
  only commits to that directory since 2013 was some kbuild fixups for
  various build tool issues.

  So lets finally drop this, we don't need to lug them around in the
  kernel source tree anymore, especially as no one wants or uses them.

  This has passed build testing with 0-day, I don't think it made it
  into linux-next this week, but I figured it was good to get in before
  4.14-rc1 was out"

* tag 'firmware_removal-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  firmware: delete in-kernel firmware

4 years agoMerge tag 'nios2-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan...
Linus Torvalds [Fri, 15 Sep 2017 19:47:21 +0000 (12:47 -0700)]
Merge tag 'nios2-v4.14-rc1' of git://git./linux/kernel/git/lftan/nios2

Pull arch/nios2 update from Ley Foon Tan.

* tag 'nios2-v4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: time: Read timer in get_cycles only if initialized
  nios2: add earlycon support to 3c120 devboard DTS

4 years agoMerge tag 'powerpc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Fri, 15 Sep 2017 19:44:59 +0000 (12:44 -0700)]
Merge tag 'powerpc-4.14-2' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
 "Just one fix, for the handling of alignment interrupts on dcbz
  instructions.

  Thanks to Paul Mackerras, Christian Zigotzky, Michal Sojka"

* tag 'powerpc-4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc: Fix handling of alignment interrupt on dcbz instruction

4 years agoMerge tag 'for-linus-4.14-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 15 Sep 2017 19:16:18 +0000 (12:16 -0700)]
Merge tag 'for-linus-4.14-ofs2' of git://git./linux/kernel/git/hubcap/linux

Pull orangefs updates from Mike Marshall:
 "Some cleanups and a big bug fix for ACLs.

  When I was reviewing Jan Kara's ACL patch, I realized that Orangefs
  ACL code was busted, not just in the kernel module, but in the server
  as well. I've been working on the code in the server mostly, but
  here's one kernel patch, there will be more"

* tag 'for-linus-4.14-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: Adjust three checks for null pointers
  orangefs: Use kcalloc() in orangefs_prepare_cdm_array()
  orangefs: Delete error messages for a failed memory allocation in five functions
  orangefs: constify xattr_handler structure
  orangefs: don't call filemap_write_and_wait from fsync
  orangefs: off by ones in xattr size checks
  orangefs: documentation clean up
  orangefs: react properly to posix_acl_update_mode's aftermath.
  orangefs: Don't clear SGID when inheriting ACLs

4 years agoMerge branch 'next' into for-linus
Dmitry Torokhov [Fri, 15 Sep 2017 16:52:21 +0000 (09:52 -0700)]
Merge branch 'next' into for-linus

Prepare second round of input updates for 4.14 merge window.

4 years agoInput: i8042 - add Gigabyte P57 to the keyboard reset table
Kai-Heng Feng [Fri, 15 Sep 2017 16:36:16 +0000 (09:36 -0700)]
Input: i8042 - add Gigabyte P57 to the keyboard reset table

Similar to other Gigabyte laptops, the touchpad on P57 requires a
keyboard reset to detect Elantech touchpad correctly.

BugLink: https://bugs.launchpad.net/bugs/1594214
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
4 years agokvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly
Jim Mattson [Thu, 14 Sep 2017 23:31:44 +0000 (16:31 -0700)]
kvm: nVMX: Handle deferred early VMLAUNCH/VMRESUME failure properly

When emulating a nested VM-entry from L1 to L2, several control field
validation checks are deferred to the hardware. Should one of these
validation checks fail, vcpu_vmx_run will set the vmx->fail flag. When
this happens, the L2 guest state is not loaded (even in part), and
execution should continue in L1 with the next instruction after the
VMLAUNCH/VMRESUME.

The VMCS12 is not modified (except for the VM-instruction error
field), the VMCS12 MSR save/load lists are not processed, and the CPU
state is not loaded from the VMCS12 host area. Moreover, the vmcs02
exit reason is stale, so it should not be consulted for any reason.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agokvm: vmx: Handle VMLAUNCH/VMRESUME failure properly
Jim Mattson [Thu, 14 Sep 2017 23:31:42 +0000 (16:31 -0700)]
kvm: vmx: Handle VMLAUNCH/VMRESUME failure properly

On an early VMLAUNCH/VMRESUME failure (i.e. one which sets the
VM-instruction error field of the current VMCS), the launch state of
the current VMCS is not set to "launched," and the VM-exit information
fields of the current VMCS (including IDT-vectoring information and
exit reason) are stale.

On a late VMLAUNCH/VMRESUME failure (i.e. one which sets the high bit
of the exit reason field), the launch state of the current VMCS is not
set to "launched," and only two of the VM-exit information fields of
the current VMCS are modified (exit reason and exit
qualification). The remaining VM-exit information fields of the
current VMCS (including IDT-vectoring information, in particular) are
stale.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agokvm: nVMX: Remove nested_vmx_succeed after successful VM-entry
Jim Mattson [Thu, 14 Sep 2017 23:31:40 +0000 (16:31 -0700)]
kvm: nVMX: Remove nested_vmx_succeed after successful VM-entry

After a successful VM-entry, RFLAGS is cleared, with the exception of
bit 1, which is always set. This is handled by load_vmcs12_host_state.

Signed-off-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agokvm,mips: Fix potential swait_active() races
Davidlohr Bueso [Wed, 13 Sep 2017 20:08:24 +0000 (13:08 -0700)]
kvm,mips: Fix potential swait_active() races

For example, the following could occur, making us miss a wakeup:

CPU0 CPU1
kvm_vcpu_block kvm_mips_comparecount_func
  [L] swait_active(&vcpu->wq)
  [S] prepare_to_swait(&vcpu->wq)
  [L] if (!kvm_vcpu_has_pending_timer(vcpu))
         schedule()                       [S] queue_timer_int(vcpu)

Ensure that the swait_active() check is not hoisted over the interrupt.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agokvm,powerpc: Serialize wq active checks in ops->vcpu_kick
Davidlohr Bueso [Wed, 13 Sep 2017 20:08:23 +0000 (13:08 -0700)]
kvm,powerpc: Serialize wq active checks in ops->vcpu_kick

Particularly because kvmppc_fast_vcpu_kick_hv() is a callback,
ensure that we properly serialize wq active checks in order to
avoid potentially missing a wakeup due to racing with the waiter
side.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agokvm: Serialize wq active checks in kvm_vcpu_wake_up()
Davidlohr Bueso [Wed, 13 Sep 2017 20:08:22 +0000 (13:08 -0700)]
kvm: Serialize wq active checks in kvm_vcpu_wake_up()

This is a generic call and can be suceptible to races
in reading the wq task_list while another task is adding
itself to the list. Add a full barrier by using the
swq_has_sleeper() helper.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agokvm,x86: Fix apf_task_wake_one() wq serialization
Davidlohr Bueso [Wed, 13 Sep 2017 20:08:21 +0000 (13:08 -0700)]
kvm,x86: Fix apf_task_wake_one() wq serialization

During code inspection, the following potential race was seen:

CPU0                    CPU1
kvm_async_pf_task_wait apf_task_wake_one
  [L] swait_active(&n->wq)
  [S] prepare_to_swait(&n.wq)
  [L] if (!hlist_unhahed(&n.link))
schedule()   [S] hlist_del_init(&n->link);

Properly serialize swait_active() checks such that a wakeup is
not missed.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agokvm,lapic: Justify use of swait_active()
Davidlohr Bueso [Wed, 13 Sep 2017 20:08:20 +0000 (13:08 -0700)]
kvm,lapic: Justify use of swait_active()

A comment might serve future readers.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agokvm,async_pf: Use swq_has_sleeper()
Davidlohr Bueso [Wed, 13 Sep 2017 20:08:19 +0000 (13:08 -0700)]
kvm,async_pf: Use swq_has_sleeper()

... as we've got the new helper now. This caller already
does the right thing, hence no changes in semantics.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agosched/wait: Add swq_has_sleeper()
Davidlohr Bueso [Wed, 13 Sep 2017 20:08:18 +0000 (13:08 -0700)]
sched/wait: Add swq_has_sleeper()

Which is the equivalent of what we have in regular waitqueues.
I'm not crazy about the name, but this also helps us get both
apis closer -- which iirc comes originally from the -net folks.

We also duplicate the comments for the lockless swait_active(),
from wait.h. Future users will make use of this interface.

Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoKVM: VMX: Do not BUG() on out-of-bounds guest IRQ
Jan H. Schönherr [Thu, 7 Sep 2017 18:02:30 +0000 (19:02 +0100)]
KVM: VMX: Do not BUG() on out-of-bounds guest IRQ

The value of the guest_irq argument to vmx_update_pi_irte() is
ultimately coming from a KVM_IRQFD API call. Do not BUG() in
vmx_update_pi_irte() if the value is out-of bounds. (Especially,
since KVM as a whole seems to hang after that.)

Instead, print a message only once if we find that we don't have a
route for a certain IRQ (which can be out-of-bounds or within the
array).

This fixes CVE-2017-1000252.

Fixes: efc644048ecde54 ("KVM: x86: Update IRTE for posted-interrupts")
Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoKVM: Don't accept obviously wrong gsi values via KVM_IRQFD
Jan H. Schönherr [Thu, 7 Sep 2017 18:02:48 +0000 (19:02 +0100)]
KVM: Don't accept obviously wrong gsi values via KVM_IRQFD

We cannot add routes for gsi values >= KVM_MAX_IRQ_ROUTES -- see
kvm_set_irq_routing(). Hence, there is no sense in accepting them
via KVM_IRQFD. Prevent them from entering the system in the first
place.

Signed-off-by: Jan H. Schönherr <jschoenh@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agonios2: time: Read timer in get_cycles only if initialized
Guenter Roeck [Tue, 12 Sep 2017 03:45:26 +0000 (20:45 -0700)]
nios2: time: Read timer in get_cycles only if initialized

Mainline crashes as follows when running nios2 images.

On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c8408fa0, node_mem_map c8726000
  Normal zone: 512 pages used for memmap
  Normal zone: 0 pages reserved
  Normal zone: 65536 pages, LIFO batch:15
Unable to handle kernel NULL pointer dereference at virtual address 00000000
ea = c8003cb0, ra = c81cbf40, cause = 15
Kernel panic - not syncing: Oops

Problem is seen because get_cycles() is called before the timer it depends
on is initialized. Returning 0 in that situation fixes the problem.

Fixes: 33d72f3822d7 ("init/main.c: extract early boot entropy from the ..")
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Daniel Micay <danielmicay@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
4 years agonios2: add earlycon support to 3c120 devboard DTS
Tobias Klauser [Tue, 20 Jun 2017 07:43:18 +0000 (09:43 +0200)]
nios2: add earlycon support to 3c120 devboard DTS

Allow earlycon to be used on the JTAG UART present in the 3c120 GHRD.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
4 years agokvm: nVMX: Don't allow L2 to access the hardware CR8
Jim Mattson [Tue, 12 Sep 2017 20:02:54 +0000 (13:02 -0700)]
kvm: nVMX: Don't allow L2 to access the hardware CR8

If L1 does not specify the "use TPR shadow" VM-execution control in
vmcs12, then L0 must specify the "CR8-load exiting" and "CR8-store
exiting" VM-execution controls in vmcs02. Failure to do so will give
the L2 VM unrestricted read/write access to the hardware CR8.

This fixes CVE-2017-12154.

Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
4 years agoRevert "PCI: Avoid race while enabling upstream bridges"
Bjorn Helgaas [Fri, 15 Sep 2017 06:33:51 +0000 (01:33 -0500)]
Revert "PCI: Avoid race while enabling upstream bridges"

This reverts commit 40f11adc7cd9281227f0a6a627d966dd0a5f0cd9.

Jens found that iwlwifi firmware loading failed on a Lenovo X1 Carbon,
gen4:

  iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-34.ucode failed with error -2
  iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-33.ucode failed with error -2
  iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-8000C-32.ucode failed with error -2
  iwlwifi 0000:04:00.0: loaded firmware version 31.532993.0 op_mode iwlmvm
  iwlwifi 0000:04:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
  ...
  iwlwifi 0000:04:00.0: Failed to load firmware chunk!
  iwlwifi 0000:04:00.0: Could not load the [0] uCode section
  iwlwifi 0000:04:00.0: Failed to start INIT ucode: -110
  iwlwifi 0000:04:00.0: Failed to run INIT ucode: -110

He bisected it to 40f11adc7cd9 ("PCI: Avoid race while enabling upstream
bridges").  Revert that commit to fix the regression.

Link: http://lkml.kernel.org/r/4bcbcbc1-7c79-09f0-5071-bc2f53bf6574@kernel.dk
Fixes: 40f11adc7cd9 ("PCI: Avoid race while enabling upstream bridges")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Srinath Mannam <srinath.mannam@broadcom.com>
CC: Jens Axboe <axboe@kernel.dk>
CC: Luca Coelho <luca@coelho.fi>
CC: Johannes Berg <johannes@sipsolutions.net>
CC: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
4 years agovfs: constify path argument to kernel_read_file_from_path
Mimi Zohar [Wed, 13 Sep 2017 02:45:33 +0000 (22:45 -0400)]
vfs: constify path argument to kernel_read_file_from_path

This patch constifies the path argument to kernel_read_file_from_path().

Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
4 years agoMerge tag 'nfs-for-4.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Linus Torvalds [Fri, 15 Sep 2017 03:04:32 +0000 (20:04 -0700)]
Merge tag 'nfs-for-4.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull more NFS client updates from Trond Myklebust:
 "Hightlights include:

  Bugfixes:
   - Various changes relating to reporting IO errors.
   - pnfs: Use the standard I/O stateid when calling LAYOUTGET

  Features:
   - Add static NFS I/O tracepoints for debugging"

* tag 'nfs-for-4.14-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFS: various changes relating to reporting IO errors.
  NFS: Add static NFS I/O tracepoints
  pNFS: Use the standard I/O stateid when calling LAYOUTGET

4 years agoMerge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Fri, 15 Sep 2017 03:01:41 +0000 (20:01 -0700)]
Merge branch 'work.misc' of git://git./linux/kernel/git/viro/vfs

Pull misc leftovers from Al Viro.

* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fix the __user misannotations in asm-generic get_user/put_user
  fput: Don't reinvent the wheel but use existing llist API
  namespace.c: Don't reinvent the wheel but use existing llist API

4 years agoMerge branch 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Fri, 15 Sep 2017 02:29:55 +0000 (19:29 -0700)]
Merge branch 'work.read_write' of git://git./linux/kernel/git/viro/vfs

Pull nowait read support from Al Viro:
 "Support IOCB_NOWAIT for buffered reads and block devices"

* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  block_dev: support RFW_NOWAIT on block device nodes
  fs: support RWF_NOWAIT for buffered reads
  fs: support IOCB_NOWAIT in generic_file_buffered_read
  fs: pass iocb to do_generic_file_read

4 years agoMerge branch 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Fri, 15 Sep 2017 01:54:01 +0000 (18:54 -0700)]
Merge branch 'work.mount' of git://git./linux/kernel/git/viro/vfs

Pull mount flag updates from Al Viro:
 "Another chunk of fmount preparations from dhowells; only trivial
  conflicts for that part. It separates MS_... bits (very grotty
  mount(2) ABI) from the struct super_block ->s_flags (kernel-internal,
  only a small subset of MS_... stuff).

  This does *not* convert the filesystems to new constants; only the
  infrastructure is done here. The next step in that series is where the
  conflicts would be; that's the conversion of filesystems. It's purely
  mechanical and it's better done after the merge, so if you could run
  something like

list=$(for i in MS_RDONLY MS_NOSUID MS_NODEV MS_NOEXEC MS_SYNCHRONOUS MS_MANDLOCK MS_DIRSYNC MS_NOATIME MS_NODIRATIME MS_SILENT MS_POSIXACL MS_KERNMOUNT MS_I_VERSION MS_LAZYTIME; do git grep -l $i fs drivers/staging/lustre drivers/mtd ipc mm include/linux; done|sort|uniq|grep -v '^fs/namespace.c$')

sed -i -e 's/\<MS_RDONLY\>/SB_RDONLY/g' \
        -e 's/\<MS_NOSUID\>/SB_NOSUID/g' \
        -e 's/\<MS_NODEV\>/SB_NODEV/g' \
        -e 's/\<MS_NOEXEC\>/SB_NOEXEC/g' \
        -e 's/\<MS_SYNCHRONOUS\>/SB_SYNCHRONOUS/g' \
        -e 's/\<MS_MANDLOCK\>/SB_MANDLOCK/g' \
        -e 's/\<MS_DIRSYNC\>/SB_DIRSYNC/g' \
        -e 's/\<MS_NOATIME\>/SB_NOATIME/g' \
        -e 's/\<MS_NODIRATIME\>/SB_NODIRATIME/g' \
        -e 's/\<MS_SILENT\>/SB_SILENT/g' \
        -e 's/\<MS_POSIXACL\>/SB_POSIXACL/g' \
        -e 's/\<MS_KERNMOUNT\>/SB_KERNMOUNT/g' \
        -e 's/\<MS_I_VERSION\>/SB_I_VERSION/g' \
        -e 's/\<MS_LAZYTIME\>/SB_LAZYTIME/g' \
        $list

  and commit it with something along the lines of 'convert filesystems
  away from use of MS_... constants' as commit message, it would save a
  quite a bit of headache next cycle"

* 'work.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Differentiate mount flags (MS_*) from internal superblock flags
  VFS: Convert sb->s_flags & MS_RDONLY to sb_rdonly(sb)
  vfs: Add sb_rdonly(sb) to query the MS_RDONLY flag on s_flags

4 years agoMerge branch 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Fri, 15 Sep 2017 01:13:32 +0000 (18:13 -0700)]
Merge branch 'work.set_fs' of git://git./linux/kernel/git/viro/vfs

Pull more set_fs removal from Al Viro:
 "Christoph's 'use kernel_read and friends rather than open-coding
  set_fs()' series"

* 'work.set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  fs: unexport vfs_readv and vfs_writev
  fs: unexport vfs_read and vfs_write
  fs: unexport __vfs_read/__vfs_write
  lustre: switch to kernel_write
  gadget/f_mass_storage: stop messing with the address limit
  mconsole: switch to kernel_read
  btrfs: switch write_buf to kernel_write
  net/9p: switch p9_fd_read to kernel_write
  mm/nommu: switch do_mmap_private to kernel_read
  serial2002: switch serial2002_tty_write to kernel_{read/write}
  fs: make the buf argument to __kernel_write a void pointer
  fs: fix kernel_write prototype
  fs: fix kernel_read prototype
  fs: move kernel_read to fs/read_write.c
  fs: move kernel_write to fs/read_write.c
  autofs4: switch autofs4_write to __kernel_write
  ashmem: switch to ->read_iter

4 years agoMerge branch 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Fri, 15 Sep 2017 00:37:26 +0000 (17:37 -0700)]
Merge branch 'work.ipc' of git://git./linux/kernel/git/viro/vfs

Pull ipc compat cleanup and 64-bit time_t from Al Viro:
 "IPC copyin/copyout sanitizing, including 64bit time_t work from Deepa
  Dinamani"

* 'work.ipc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  utimes: Make utimes y2038 safe
  ipc: shm: Make shmid_kernel timestamps y2038 safe
  ipc: sem: Make sem_array timestamps y2038 safe
  ipc: msg: Make msg_queue timestamps y2038 safe
  ipc: mqueue: Replace timespec with timespec64
  ipc: Make sys_semtimedop() y2038 safe
  get rid of SYSVIPC_COMPAT on ia64
  semtimedop(): move compat to native
  shmat(2): move compat to native
  msgrcv(2), msgsnd(2): move compat to native
  ipc(2): move compat to native
  ipc: make use of compat ipc_perm helpers
  semctl(): move compat to native
  semctl(): separate all layout-dependent copyin/copyout
  msgctl(): move compat to native
  msgctl(): split the actual work from copyin/copyout
  ipc: move compat shmctl to native
  shmctl: split the work from copyin/copyout

4 years agoMerge branch 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason...
Linus Torvalds [Fri, 15 Sep 2017 00:30:49 +0000 (17:30 -0700)]
Merge branch 'zstd-minimal' of git://git./linux/kernel/git/mason/linux-btrfs

Pull zstd support from Chris Mason:
 "Nick Terrell's patch series to add zstd support to the kernel has been
  floating around for a while. After talking with Dave Sterba, Herbert
  and Phillip, we decided to send the whole thing in as one pull
  request.

  zstd is a big win in speed over zlib and in compression ratio over
  lzo, and the compression team here at FB has gotten great results
  using it in production. Nick will continue to update the kernel side
  with new improvements from the open source zstd userland code.

  Nick has a number of benchmarks for the main zstd code in his lib/zstd
  commit:

      I ran the benchmarks on a Ubuntu 14.04 VM with 2 cores and 4 GiB
      of RAM. The VM is running on a MacBook Pro with a 3.1 GHz Intel
      Core i7 processor, 16 GB of RAM, and a SSD. I benchmarked using
      `silesia.tar` [3], which is 211,988,480 B large. Run the following
      commands for the benchmark:

        sudo modprobe zstd_compress_test
        sudo mknod zstd_compress_test c 245 0
        sudo cp silesia.tar zstd_compress_test

      The time is reported by the time of the userland `cp`.
      The MB/s is computed with

        1,536,217,008 B / time(buffer size, hash)

      which includes the time to copy from userland.
      The Adjusted MB/s is computed with

        1,536,217,088 B / (time(buffer size, hash) - time(buffer size, none)).

      The memory reported is the amount of memory the compressor
      requests.

        | Method   | Size (B) | Time (s) | Ratio | MB/s    | Adj MB/s | Mem (MB) |
        |----------|----------|----------|-------|---------|----------|----------|
        | none     | 11988480 |    0.100 |     1 | 2119.88 |        - |        - |
        | zstd -1  | 73645762 |    1.044 | 2.878 |  203.05 |   224.56 |     1.23 |
        | zstd -3  | 66988878 |    1.761 | 3.165 |  120.38 |   127.63 |     2.47 |
        | zstd -5  | 65001259 |    2.563 | 3.261 |   82.71 |    86.07 |     2.86 |
        | zstd -10 | 60165346 |   13.242 | 3.523 |   16.01 |    16.13 |    13.22 |
        | zstd -15 | 58009756 |   47.601 | 3.654 |    4.45 |     4.46 |    21.61 |
        | zstd -19 | 54014593 |  102.835 | 3.925 |    2.06 |     2.06 |    60.15 |
        | zlib -1  | 77260026 |    2.895 | 2.744 |   73.23 |    75.85 |     0.27 |
        | zlib -3  | 72972206 |    4.116 | 2.905 |   51.50 |    52.79 |     0.27 |
        | zlib -6  | 68190360 |    9.633 | 3.109 |   22.01 |    22.24 |     0.27 |
        | zlib -9  | 67613382 |   22.554 | 3.135 |    9.40 |     9.44 |     0.27 |

      I benchmarked zstd decompression using the same method on the same
      machine. The benchmark file is located in the upstream zstd repo
      under `contrib/linux-kernel/zstd_decompress_test.c` [4]. The
      memory reported is the amount of memory required to decompress
      data compressed with the given compression level. If you know the
      maximum size of your input, you can reduce the memory usage of
      decompression irrespective of the compression level.

        | Method   | Time (s) | MB/s    | Adjusted MB/s | Memory (MB) |
        |----------|----------|---------|---------------|-------------|
        | none     |    0.025 | 8479.54 |             - |           - |
        | zstd -1  |    0.358 |  592.15 |        636.60 |        0.84 |
        | zstd -3  |    0.396 |  535.32 |        571.40 |        1.46 |
        | zstd -5  |    0.396 |  535.32 |        571.40 |        1.46 |
        | zstd -10 |    0.374 |  566.81 |        607.42 |        2.51 |
        | zstd -15 |    0.379 |  559.34 |        598.84 |        4.61 |
        | zstd -19 |    0.412 |  514.54 |        547.77 |        8.80 |
        | zlib -1  |    0.940 |  225.52 |        231.68 |        0.04 |
        | zlib -3  |    0.883 |  240.08 |        247.07 |        0.04 |
        | zlib -6  |    0.844 |  251.17 |        258.84 |        0.04 |
        | zlib -9  |    0.837 |  253.27 |        287.64 |        0.04 |

  I ran a long series of tests and benchmarks on the btrfs side and the
  gains are very similar to the core benchmarks Nick ran"

* 'zstd-minimal' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  squashfs: Add zstd support
  btrfs: Add zstd support
  lib: Add zstd modules
  lib: Add xxhash module