sfrench/cifs-2.6.git
21 months agoMerge tag 'm68k-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 20 Dec 2018 15:35:16 +0000 (07:35 -0800)]
Merge tag 'm68k-for-v4.20-tag2' of git://git./linux/kernel/git/geert/linux-m68k

Pull m68k fix from Geert Uytterhoeven:
 "Fix memblock-related crashes"

* tag 'm68k-for-v4.20-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Fix memblock-related crashes

21 months agoMerge tag 'kbuild-fixes-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 20 Dec 2018 15:33:09 +0000 (07:33 -0800)]
Merge tag 'kbuild-fixes-v4.20-2' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fix from Masahiro Yamada:
 "Fix false positive warning/error about missing library for objtool"

* tag 'kbuild-fixes-v4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: fix false positive warning/error about missing libelf

21 months agoMerge tag 'char-misc-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregk...
Linus Torvalds [Thu, 20 Dec 2018 15:30:37 +0000 (07:30 -0800)]
Merge tag 'char-misc-4.20-rc8' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are three tiny last-minute driver fixes for 4.20-rc8 that resolve
  some reported issues, and one MAINTAINERS file update.

  All of them are related to the hyper-v subsystem, it seems people are
  actually testing and using it now, which is nice to see :)

  The fixes are:
   - uio_hv_generic: fix for opening multiple times
   - Remove PCI dependancy on hyperv drivers
   - return proper error code for an unopened channel.

  And Sasha has signed up to help out with the hyperv maintainership.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  Drivers: hv: vmbus: Return -EINVAL for the sys files for unopened channels
  x86, hyperv: remove PCI dependency
  MAINTAINERS: Patch monkey for the Hyper-V code
  uio_hv_generic: set callbacks on open

21 months agoMerge tag 'tty-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Thu, 20 Dec 2018 15:29:11 +0000 (07:29 -0800)]
Merge tag 'tty-4.20-rc8' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fix from Greg KH:
 "Here is a single fix, a revert, for the 8250 serial driver to resolve
  a reported problem.

  There was some attempted patches to fix the issue, but people are
  arguing about them, so reverting the patch to revert back to the 4.19
  and older behavior is the best thing to do at this late in the release
  cycle.

  The revert has been in linux-next with no reported issues"

* tag 'tty-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"

21 months agoMerge tag 'usb-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Thu, 20 Dec 2018 15:27:39 +0000 (07:27 -0800)]
Merge tag 'usb-4.20-rc8' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes and ids from Greg KH:
 "Here are some late xhci fixes for 4.20-rc8 as well as a few new device
  ids for the option usb-serial driver.

  The xhci fixes resolve some many-reported issues and all of these have
  been in linux-next for a while with no reported problems"

* tag 'usb-4.20-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: xhci: fix 'broken_suspend' placement in struct xchi_hcd
  xhci: Don't prevent USB2 bus suspend in state check intended for USB3 only
  USB: serial: option: add Telit LN940 series
  USB: serial: option: add Fibocom NL668 series
  USB: serial: option: add Simcom SIM7500/SIM7600 (MBIM mode)
  USB: serial: option: add GosunCn ZTE WeLink ME3630
  USB: serial: option: add HP lt4132

21 months agoMerge tag 'mmc-v4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Thu, 20 Dec 2018 15:25:31 +0000 (07:25 -0800)]
Merge tag 'mmc-v4.20-rc7' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Restore code to allow BKOPS and CACHE ctrl even if no HPI support
   - Reset HPI enabled state during re-init
   - Use a default minimum timeout when enabling CACHE ctrl

  MMC host:
   - omap_hsmmc: Fix DMA API warning
   - sdhci-tegra: Fix dt parsing of SDMMC pads autocal values
   - Correct register accesses when enabling v4 mode"

* tag 'mmc-v4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl
  mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support
  mmc: core: Reset HPI enabled state during re-init and in case of errors
  mmc: omap_hsmmc: fix DMA API warning
  mmc: tegra: Fix for SDMMC pads autocal parsing from dt
  mmc: sdhci: Fix sdhci_do_enable_v4_mode

21 months agoiomap: Revert "fs/iomap.c: get/put the page in iomap_page_create/release()"
Dave Chinner [Thu, 20 Dec 2018 12:23:24 +0000 (23:23 +1100)]
iomap: Revert "fs/iomap.c: get/put the page in iomap_page_create/release()"

This reverts commit 61c6de667263184125d5ca75e894fcad632b0dd3.

The reverted commit added page reference counting to iomap page
structures that are used to track block size < page size state. This
was supposed to align the code with page migration page accounting
assumptions, but what it has done instead is break XFS filesystems.
Every fstests run I've done on sub-page block size XFS filesystems
has since picking up this commit 2 days ago has failed with bad page
state errors such as:

# ./run_check.sh "-m rmapbt=1,reflink=1 -i sparse=1 -b size=1k" "generic/038"
....
SECTION       -- xfs
FSTYP         -- xfs (debug)
PLATFORM      -- Linux/x86_64 test1 4.20.0-rc6-dgc+
MKFS_OPTIONS  -- -f -m rmapbt=1,reflink=1 -i sparse=1 -b size=1k /dev/sdc
MOUNT_OPTIONS -- /dev/sdc /mnt/scratch

generic/038 454s ...
 run fstests generic/038 at 2018-12-20 18:43:05
 XFS (sdc): Unmounting Filesystem
 XFS (sdc): Mounting V5 Filesystem
 XFS (sdc): Ending clean mount
 BUG: Bad page state in process kswapd0  pfn:3a7fa
 page:ffffea0000ccbeb0 count:0 mapcount:0 mapping:ffff88800d9b6360 index:0x1
 flags: 0xfffffc0000000()
 raw: 000fffffc0000000 dead000000000100 dead000000000200 ffff88800d9b6360
 raw: 0000000000000001 0000000000000000 00000000ffffffff
 page dumped because: non-NULL mapping
 CPU: 0 PID: 676 Comm: kswapd0 Not tainted 4.20.0-rc6-dgc+ #915
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.1-1 04/01/2014
 Call Trace:
  dump_stack+0x67/0x90
  bad_page.cold.116+0x8a/0xbd
  free_pcppages_bulk+0x4bf/0x6a0
  free_unref_page_list+0x10f/0x1f0
  shrink_page_list+0x49d/0xf50
  shrink_inactive_list+0x19d/0x3b0
  shrink_node_memcg.constprop.77+0x398/0x690
  ? shrink_slab.constprop.81+0x278/0x3f0
  shrink_node+0x7a/0x2f0
  kswapd+0x34b/0x6d0
  ? node_reclaim+0x240/0x240
  kthread+0x11f/0x140
  ? __kthread_bind_mask+0x60/0x60
  ret_from_fork+0x24/0x30
 Disabling lock debugging due to kernel taint
....

The failures are from anyway that frees pages and empties the
per-cpu page magazines, so it's not a predictable failure or an easy
to debug failure.

generic/038 is a reliable reproducer of this problem - it has a 9 in
10 failure rate on one of my test machines. Failure on other
machines have been at random points in fstests runs but every run
has ended up tripping this problem. Hence generic/038 was used to
bisect the failure because it was the most reliable failure.

It is too close to the 4.20 release (not to mention holidays) to
try to diagnose, fix and test the underlying cause of the problem,
so reverting the commit is the only option we have right now. The
revert has been tested against a current tot 4.20-rc7+ kernel across
multiple machines running sub-page block size XFs filesystems and
none of the bad page state failures have been seen.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Brian Foster <bfoster@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
21 months agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 20 Dec 2018 07:34:33 +0000 (23:34 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Off by one in netlink parsing of mac802154_hwsim, from Alexander
    Aring.

 2) nf_tables RCU usage fix from Taehee Yoo.

 3) Flow dissector needs nhoff and thoff clamping, from Stanislav
    Fomichev.

 4) Missing sin6_flowinfo initialization in SCTP, from Xin Long.

 5) Spectrev1 in ipmr and ip6mr, from Gustavo A. R. Silva.

 6) Fix r8169 crash when DEBUG_SHIRQ is enabled, from Heiner Kallweit.

 7) Fix SKB leak in rtlwifi, from Larry Finger.

 8) Fix state pruning in bpf verifier, from Jakub Kicinski.

 9) Don't handle completely duplicate fragments as overlapping, from
    Michal Kubecek.

10) Fix memory corruption with macb and 64-bit DMA, from Anssi Hannula.

11) Fix TCP fallback socket release in smc, from Myungho Jung.

12) gro_cells_destroy needs to napi_disable, from Lorenzo Bianconi.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (130 commits)
  rds: Fix warning.
  neighbor: NTF_PROXY is a valid ndm_flag for a dump request
  net: mvpp2: fix the phylink mode validation
  net/sched: cls_flower: Remove old entries from rhashtable
  net/tls: allocate tls context using GFP_ATOMIC
  iptunnel: make TUNNEL_FLAGS available in uapi
  gro_cell: add napi_disable in gro_cells_destroy
  lan743x: Remove MAC Reset from initialization
  net/mlx5e: Remove the false indication of software timestamping support
  net/mlx5: Typo fix in del_sw_hw_rule
  net/mlx5e: RX, Fix wrong early return in receive queue poll
  ipv6: explicitly initialize udp6_addr in udp_sock_create6()
  bnxt_en: Fix ethtool self-test loopback.
  net/rds: remove user triggered WARN_ON in rds_sendmsg
  net/rds: fix warn in rds_message_alloc_sgs
  ath10k: skip sending quiet mode cmd for WCN3990
  mac80211: free skb fraglist before freeing the skb
  nl80211: fix memory leak if validate_pae_over_nl80211() fails
  net/smc: fix TCP fallback socket release
  vxge: ensure data0 is initialized in when fetching firmware version information
  ...

21 months agords: Fix warning.
David S. Miller [Thu, 20 Dec 2018 04:53:18 +0000 (20:53 -0800)]
rds: Fix warning.

>> net/rds/send.c:1109:42: warning: Using plain integer as NULL pointer

Fixes: ea010070d0a7 ("net/rds: fix warn in rds_message_alloc_sgs")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Linus Torvalds [Thu, 20 Dec 2018 02:40:48 +0000 (18:40 -0800)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fix from Michael Tsirkin:
 "A last-minute fix for a test build"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio: fix test build after uio.h change

21 months agoMerge tag 'nfs-for-4.20-6' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Linus Torvalds [Thu, 20 Dec 2018 02:38:54 +0000 (18:38 -0800)]
Merge tag 'nfs-for-4.20-6' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:

 - Fix TCP socket disconnection races by ensuring we always call
   xprt_disconnect_done() after releasing the socket.

 - Fix a race when clearing both XPRT_CONNECTING and XPRT_LOCKED

 - Remove xprt_connect_status() so it does not mask errors that should
   be handled by call_connect_status()

* tag 'nfs-for-4.20-6' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  SUNRPC: Remove xprt_connect_status()
  SUNRPC: Fix a race with XPRT_CONNECTING
  SUNRPC: Fix disconnection races

21 months agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 20 Dec 2018 02:27:58 +0000 (18:27 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:

 -  One nasty use-after-free bugfix, from this merge window however

 -  A less nasty use-after-free that can only zero some words at the
    beginning of the page, and hence is not really exploitable

 -  A NULL pointer dereference

 -  A dummy implementation of an AMD chicken bit MSR that Windows uses
    for some unknown reason

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: x86: Add AMD's EX_CFG to the list of ignored MSRs
  KVM: X86: Fix NULL deref in vcpu_scan_ioapic
  KVM: Fix UAF in nested posted interrupt processing
  KVM: fix unregistering coalesced mmio zone from wrong bus

21 months agoMerge tag 'dma-mapping-4.20-4' of git://git.infradead.org/users/hch/dma-mapping
Linus Torvalds [Thu, 20 Dec 2018 02:16:17 +0000 (18:16 -0800)]
Merge tag 'dma-mapping-4.20-4' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a regression in dma-direct that didn't take account the magic AMD
  memory encryption mask in the DMA address"

* tag 'dma-mapping-4.20-4' of git://git.infradead.org/users/hch/dma-mapping:
  dma-direct: do not include SME mask in the DMA supported check

21 months agoneighbor: NTF_PROXY is a valid ndm_flag for a dump request
David Ahern [Thu, 20 Dec 2018 00:54:38 +0000 (16:54 -0800)]
neighbor: NTF_PROXY is a valid ndm_flag for a dump request

When dumping proxy entries the dump request has NTF_PROXY set in
ndm_flags. strict mode checking needs to be updated to allow this
flag.

Fixes: 51183d233b5a ("net/neighbor: Update neigh_dump_info for strict data checking")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: mvpp2: fix the phylink mode validation
Antoine Tenart [Wed, 19 Dec 2018 17:00:12 +0000 (18:00 +0100)]
net: mvpp2: fix the phylink mode validation

The mvpp2_phylink_validate() sets all modes that are supported by a
given PPv2 port. An mistake made the 10000baseT_Full mode being
advertised in some cases when a port wasn't configured to perform at
10G. This patch fixes this.

Fixes: d97c9f4ab000 ("net: mvpp2: 1000baseX support")
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet/sched: cls_flower: Remove old entries from rhashtable
Roi Dayan [Wed, 19 Dec 2018 16:07:56 +0000 (18:07 +0200)]
net/sched: cls_flower: Remove old entries from rhashtable

When replacing a rule we add the new rule to the rhashtable
but only remove the old if not in skip_sw.
This commit fix this and remove the old rule anyway.

Fixes: 35cc3cefc4de ("net/sched: cls_flower: Reject duplicated rules also under skip_sw")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet/tls: allocate tls context using GFP_ATOMIC
Ganesh Goudar [Wed, 19 Dec 2018 11:48:22 +0000 (17:18 +0530)]
net/tls: allocate tls context using GFP_ATOMIC

create_ctx can be called from atomic context, hence use
GFP_ATOMIC instead of GFP_KERNEL.

[  395.962599] BUG: sleeping function called from invalid context at mm/slab.h:421
[  395.979896] in_atomic(): 1, irqs_disabled(): 0, pid: 16254, name: openssl
[  395.996564] 2 locks held by openssl/16254:
[  396.010492]  #0: 00000000347acb52 (sk_lock-AF_INET){+.+.}, at: do_tcp_setsockopt.isra.44+0x13b/0x9a0
[  396.029838]  #1: 000000006c9552b5 (device_spinlock){+...}, at: tls_init+0x1d/0x280
[  396.047675] CPU: 5 PID: 16254 Comm: openssl Tainted: G           O      4.20.0-rc6+ #25
[  396.066019] Hardware name: Supermicro X10SRA-F/X10SRA-F, BIOS 2.0c 09/25/2017
[  396.083537] Call Trace:
[  396.096265]  dump_stack+0x5e/0x8b
[  396.109876]  ___might_sleep+0x216/0x250
[  396.123940]  kmem_cache_alloc_trace+0x1b0/0x240
[  396.138800]  create_ctx+0x1f/0x60
[  396.152504]  tls_init+0xbd/0x280
[  396.166135]  tcp_set_ulp+0x191/0x2d0
[  396.180035]  ? tcp_set_ulp+0x2c/0x2d0
[  396.193960]  do_tcp_setsockopt.isra.44+0x148/0x9a0
[  396.209013]  __sys_setsockopt+0x7c/0xe0
[  396.223054]  __x64_sys_setsockopt+0x20/0x30
[  396.237378]  do_syscall_64+0x4a/0x180
[  396.251200]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: df9d4a178022 ("net/tls: sleeping function from invalid context")
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoiptunnel: make TUNNEL_FLAGS available in uapi
wenxu [Wed, 19 Dec 2018 06:11:15 +0000 (14:11 +0800)]
iptunnel: make TUNNEL_FLAGS available in uapi

ip l add dev tun type gretap external
ip r a 10.0.0.1 encap ip dst 192.168.152.171 id 1000 dev gretap

For gretap Key example when the command set the id but don't set the
TUNNEL_KEY flags. There is no key field in the send packet

In the lwtunnel situation, some TUNNEL_FLAGS should can be set by
userspace

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agogro_cell: add napi_disable in gro_cells_destroy
Lorenzo Bianconi [Wed, 19 Dec 2018 22:23:00 +0000 (23:23 +0100)]
gro_cell: add napi_disable in gro_cells_destroy

Add napi_disable routine in gro_cells_destroy since starting from
commit c42858eaf492 ("gro_cells: remove spinlock protecting receive
queues") gro_cell_poll and gro_cells_destroy can run concurrently on
napi_skbs list producing a kernel Oops if the tunnel interface is
removed while gro_cell_poll is running. The following Oops has been
triggered removing a vxlan device while the interface is receiving
traffic

[ 5628.948853] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[ 5628.949981] PGD 0 P4D 0
[ 5628.950308] Oops: 0002 [#1] SMP PTI
[ 5628.950748] CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.20.0-rc6+ #41
[ 5628.952940] RIP: 0010:gro_cell_poll+0x49/0x80
[ 5628.955615] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202
[ 5628.956250] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000
[ 5628.957102] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150
[ 5628.957940] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000
[ 5628.958803] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040
[ 5628.959661] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040
[ 5628.960682] FS:  0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000
[ 5628.961616] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5628.962359] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0
[ 5628.963188] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5628.964034] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5628.964871] Call Trace:
[ 5628.965179]  net_rx_action+0xf0/0x380
[ 5628.965637]  __do_softirq+0xc7/0x431
[ 5628.966510]  run_ksoftirqd+0x24/0x30
[ 5628.966957]  smpboot_thread_fn+0xc5/0x160
[ 5628.967436]  kthread+0x113/0x130
[ 5628.968283]  ret_from_fork+0x3a/0x50
[ 5628.968721] Modules linked in:
[ 5628.969099] CR2: 0000000000000008
[ 5628.969510] ---[ end trace 9d9dedc7181661fe ]---
[ 5628.970073] RIP: 0010:gro_cell_poll+0x49/0x80
[ 5628.972965] RSP: 0018:ffffc9000004fdd8 EFLAGS: 00010202
[ 5628.973611] RAX: 0000000000000000 RBX: ffffe8ffffc08150 RCX: 0000000000000000
[ 5628.974504] RDX: 0000000000000000 RSI: ffff88802356bf00 RDI: ffffe8ffffc08150
[ 5628.975462] RBP: 0000000000000026 R08: 0000000000000000 R09: 0000000000000000
[ 5628.976413] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000040
[ 5628.977375] R13: ffffe8ffffc08100 R14: 0000000000000000 R15: 0000000000000040
[ 5628.978296] FS:  0000000000000000(0000) GS:ffff88803ea00000(0000) knlGS:0000000000000000
[ 5628.979327] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5628.980044] CR2: 0000000000000008 CR3: 000000000221c000 CR4: 00000000000006b0
[ 5628.980929] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5628.981736] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5628.982409] Kernel panic - not syncing: Fatal exception in interrupt
[ 5628.983307] Kernel Offset: disabled

Fixes: c42858eaf492 ("gro_cells: remove spinlock protecting receive queues")
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agolan743x: Remove MAC Reset from initialization
Bryan Whitehead [Wed, 19 Dec 2018 21:55:15 +0000 (16:55 -0500)]
lan743x: Remove MAC Reset from initialization

The MAC Reset was noticed to erase important EEPROM settings.
It is also unnecessary since a chip wide reset was done earlier
in initialization, and that reset preserves EEPROM settings.

There for this patch removes the unnecessary MAC specific reset.

Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agovirtio: fix test build after uio.h change
Michael S. Tsirkin [Wed, 19 Dec 2018 23:21:51 +0000 (18:21 -0500)]
virtio: fix test build after uio.h change

Fixes: d38499530e5 ("fs: decouple READ and WRITE from the block layer ops")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
21 months agoMerge tag 'mlx5-fixes-2018-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git...
David S. Miller [Wed, 19 Dec 2018 21:44:12 +0000 (13:44 -0800)]
Merge tag 'mlx5-fixes-2018-12-19' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-fixes-2018-12-19

Some fixes for the mlx5 driver
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet/mlx5e: Remove the false indication of software timestamping support
Alaa Hleihel [Sun, 25 Nov 2018 09:46:09 +0000 (11:46 +0200)]
net/mlx5e: Remove the false indication of software timestamping support

mlx5 driver falsely advertises support of software timestamping.
Fix it by removing the false indication.

Fixes: ef9814deafd0 ("net/mlx5e: Add HW timestamping (TS) support")
Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
21 months agonet/mlx5: Typo fix in del_sw_hw_rule
Yuval Avnery [Thu, 13 Dec 2018 00:26:46 +0000 (02:26 +0200)]
net/mlx5: Typo fix in del_sw_hw_rule

Expression terminated with "," instead of ";", resulted in
set_fte getting bad value for modify_enable_mask field.

Fixes: bd5251dbf156 ("net/mlx5_core: Introduce flow steering destination of type counter")
Signed-off-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
21 months agonet/mlx5e: RX, Fix wrong early return in receive queue poll
Tariq Toukan [Sun, 2 Dec 2018 13:45:53 +0000 (15:45 +0200)]
net/mlx5e: RX, Fix wrong early return in receive queue poll

When the completion queue of the RQ is empty, do not immediately return.
If left-over decompressed CQEs (from the previous cycle) were processed,
need to go to the finalization part of the poll function.

Bug exists only when CQE compression is turned ON.

This solves the following issue:
mlx5_core 0000:82:00.1: mlx5_eq_int:544:(pid 0): CQ error on CQN 0xc08, syndrome 0x1
mlx5_core 0000:82:00.1 p4p2: mlx5e_cq_error_event: cqn=0x000c08 event=0x04

Fixes: 4b7dfc992514 ("net/mlx5e: Early-return on empty completion queues")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
21 months agoipv6: explicitly initialize udp6_addr in udp_sock_create6()
Cong Wang [Wed, 19 Dec 2018 05:17:44 +0000 (21:17 -0800)]
ipv6: explicitly initialize udp6_addr in udp_sock_create6()

syzbot reported the use of uninitialized udp6_addr::sin6_scope_id.
We can just set ::sin6_scope_id to zero, as tunnels are unlikely
to use an IPv6 address that needs a scope id and there is no
interface to bind in this context.

For net-next, it looks different as we have cfg->bind_ifindex there
so we can probably call ipv6_iface_scope_id().

Same for ::sin6_flowinfo, tunnels don't use it.

Fixes: 8024e02879dd ("udp: Add udp_sock_create for UDP tunnels to open listener socket")
Reported-by: syzbot+c56449ed3652e6720f30@syzkaller.appspotmail.com
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agobnxt_en: Fix ethtool self-test loopback.
Michael Chan [Wed, 19 Dec 2018 18:46:50 +0000 (13:46 -0500)]
bnxt_en: Fix ethtool self-test loopback.

The current code has 2 problems.  It assumes that the RX ring for
the loopback packet is combined with the TX ring.  This is not
true if the ethtool channels are set to non-combined mode.  The
second problem is that it won't work on 57500 chips without
adjusting the logic to get the proper completion ring (cpr) pointer.
Fix both issues by locating the proper cpr pointer through the RX
ring.

Fixes: e44758b78ae8 ("bnxt_en: Use bnxt_cp_ring_info struct pointer as parameter for RX path.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge branch 'rds-fixes'
David S. Miller [Wed, 19 Dec 2018 18:27:58 +0000 (10:27 -0800)]
Merge branch 'rds-fixes'

Shamir Rabinovitch says:

====================
WARNING in rds_message_alloc_sgs

This patch set fix google syzbot rds bug found in linux-next.
The first patch solve the syzbot issue.
The second patch fix issue mentioned by Leon Romanovsky that
drivers should not call WARN_ON as result from user input.

syzbot bug report can be foud here: https://lkml.org/lkml/2018/10/31/28

v1->v2:
- patch 1: make rds_iov_vector fields name more descriptive (Hakon)
- patch 1: fix potential mem leak in rds_rm_size if krealloc fail
  (Hakon)
v2->v3:
- patch 2: harden rds_sendmsg for invalid number of sgs (Gerd)
v3->v4
- Santosh a.b. on both patches + repost to net-dev
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet/rds: remove user triggered WARN_ON in rds_sendmsg
shamir rabinovitch [Sun, 16 Dec 2018 07:01:09 +0000 (09:01 +0200)]
net/rds: remove user triggered WARN_ON in rds_sendmsg

per comment from Leon in rdma mailing list
https://lkml.org/lkml/2018/10/31/312 :

Please don't forget to remove user triggered WARN_ON.
https://lwn.net/Articles/769365/
"Greg Kroah-Hartman raised the problem of core kernel API code that will
use WARN_ON_ONCE() to complain about bad usage; that will not generate
the desired result if WARN_ON_ONCE() is configured to crash the machine.
He was told that the code should just call pr_warn() instead, and that
the called function should return an error in such situations. It was
generally agreed that any WARN_ON() or WARN_ON_ONCE() calls that can be
triggered from user space need to be fixed."

in addition harden rds_sendmsg to detect and overcome issues with
invalid sg count and fail the sendmsg.

Suggested-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet/rds: fix warn in rds_message_alloc_sgs
shamir rabinovitch [Sun, 16 Dec 2018 07:01:08 +0000 (09:01 +0200)]
net/rds: fix warn in rds_message_alloc_sgs

redundant copy_from_user in rds_sendmsg system call expose rds
to issue where rds_rdma_extra_size walk the rds iovec and and
calculate the number pf pages (sgs) it need to add to the tail of
rds message and later rds_cmsg_rdma_args copy the rds iovec again
and re calculate the same number and get different result causing
WARN_ON in rds_message_alloc_sgs.

fix this by doing the copy_from_user only once per rds_sendmsg
system call.

When issue occur the below dump is seen:

WARNING: CPU: 0 PID: 19789 at net/rds/message.c:316 rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316
Kernel panic - not syncing: panic_on_warn set ...
CPU: 0 PID: 19789 Comm: syz-executor827 Not tainted 4.19.0-next-20181030+ #101
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x244/0x39d lib/dump_stack.c:113
 panic+0x2ad/0x55c kernel/panic.c:188
 __warn.cold.8+0x20/0x45 kernel/panic.c:540
 report_bug+0x254/0x2d0 lib/bug.c:186
 fixup_bug arch/x86/kernel/traps.c:178 [inline]
 do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
 do_invalid_op+0x36/0x40 arch/x86/kernel/traps.c:290
 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:969
RIP: 0010:rds_message_alloc_sgs+0x10c/0x160 net/rds/message.c:316
Code: c0 74 04 3c 03 7e 6c 44 01 ab 78 01 00 00 e8 2b 9e 35 fa 4c 89 e0 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 e8 14 9e 35 fa <0f> 0b 31 ff 44 89 ee e8 18 9f 35 fa 45 85 ed 75 1b e8 fe 9d 35 fa
RSP: 0018:ffff8801c51b7460 EFLAGS: 00010293
RAX: ffff8801bc412080 RBX: ffff8801d7bf4040 RCX: ffffffff8749c9e6
RDX: 0000000000000000 RSI: ffffffff8749ca5c RDI: 0000000000000004
RBP: ffff8801c51b7490 R08: ffff8801bc412080 R09: ffffed003b5c5b67
R10: ffffed003b5c5b67 R11: ffff8801dae2db3b R12: 0000000000000000
R13: 000000000007165c R14: 000000000007165c R15: 0000000000000005
 rds_cmsg_rdma_args+0x82d/0x1510 net/rds/rdma.c:623
 rds_cmsg_send net/rds/send.c:971 [inline]
 rds_sendmsg+0x19a2/0x3180 net/rds/send.c:1273
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:632
 ___sys_sendmsg+0x7fd/0x930 net/socket.c:2117
 __sys_sendmsg+0x11d/0x280 net/socket.c:2155
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2162
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x44a859
Code: e8 dc e6 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 6b cb fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f1d4710ada8 EFLAGS: 00000297 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000006dcc28 RCX: 000000000044a859
RDX: 0000000000000000 RSI: 0000000020001600 RDI: 0000000000000003
RBP: 00000000006dcc20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000297 R12: 00000000006dcc2c
R13: 646e732f7665642f R14: 00007f1d4710b9c0 R15: 00000000006dcd2c
Kernel Offset: disabled
Rebooting in 86400 seconds..

Reported-by: syzbot+26de17458aeda9d305d8@syzkaller.appspotmail.com
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: shamir rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge tag 'wireless-drivers-for-davem-2018-12-19' of git://git.kernel.org/pub/scm...
David S. Miller [Wed, 19 Dec 2018 16:39:18 +0000 (08:39 -0800)]
Merge tag 'wireless-drivers-for-davem-2018-12-19' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.20

Last set of fixes for 4.20. All (except the mt76 fix) of these are
important fixes to user reported problems and pretty small in size.

rtlwifi

* fix skb leak

mwifiex

* revert a commit from v4.19 due to problems with locking

mt76

* fix a potential NULL derenfence

* add entry to MAINTAINERS

iwlwifi

* fix a firmware crash which was a regression introduced in v4.20-rc4

ath10k

* fix a firmware crash with wcn3990 firmware
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge tag 'mac80211-for-davem-2018-12-19' of git://git.kernel.org/pub/scm/linux/kerne...
David S. Miller [Wed, 19 Dec 2018 16:34:46 +0000 (08:34 -0800)]
Merge tag 'mac80211-for-davem-2018-12-19' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just three fixes:
 * fix a memory leak in an error path
 * fix TXQs in interface teardown
 * free fraglist if we used it internally
   before returning SKB
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agom68k: Fix memblock-related crashes
Geert Uytterhoeven [Mon, 3 Dec 2018 11:53:51 +0000 (12:53 +0100)]
m68k: Fix memblock-related crashes

When running the kernel in Fast RAM on Atari:

    Ignoring memory chunk at 0x0:0xe00000 before the first chunk
    ...
    Unable to handle kernel NULL pointer dereference at virtual address (ptrval)
    Oops: 00000000
    Modules linked in:
    PC: [<0069dbac>] free_all_bootmem+0x12c/0x186
    SR: 2714  SP: (ptrval)  a2: 005e3314
    d0: 00000000    d1: 0000000a    d2: 00000e00    d3: 00000000
    d4: 005e1fc0    d5: 0000001a    a0: 01000000    a1: 00000000
    Process swapper (pid: 0, task=(ptrval))
    Frame format=7 eff addr=00000736 ssw=0505 faddr=00000736
    wb 1 stat/addr/data: 0000 00000000 00000000
    wb 2 stat/addr/data: 0000 00000000 00000000
    wb 3 stat/addr/data: 0000 00000736 00000000
    push data: 00000000 00000000 00000000 00000000
    Stack from 005e1f84:
            00000000 0000000a 027d3260 006b5006 00000000 00000000 00000000 00000000
            0004f062 0003a220 0069e272 005e1ff8 0000054c 00000000 00e00000 00000000
            00000001 00693cd8 027d3260 0004f062 0003a220 00691be6 00000000 00000000
            00000000 00000000 00000000 00000000 006b5006 00000000 00690872
    Call Trace: [<0004f062>] printk+0x0/0x18
     [<0003a220>] parse_args+0x0/0x2d4
     [<0069e272>] memblock_virt_alloc_try_nid+0x0/0xa4
     [<00693cd8>] mem_init+0xa/0x5c
     [<0004f062>] printk+0x0/0x18
     [<0003a220>] parse_args+0x0/0x2d4
     [<00691be6>] start_kernel+0x1ca/0x462
     [<00690872>] _sinittext+0x872/0x11f8
    Code: 7a1a eaae 2270 6db0 0061 ef14 2f01 2f03 <96a9> 0736 2203 e589 d681 e78b d6a9 0732 2f03 2f40 0034 4eb9 0069 b8d0 260e 4fef
    Disabling lock debugging due to kernel taint
    Kernel panic - not syncing: Attempted to kill the idle task!

As the kernel must run in the memory chunk with the lowest address,
ST-RAM is ignored, and removed from the m68k_memory[] array.
However, it is not removed from memblock, causing a crash later.

More investigation shows that there are 3 places where memory chunks are
ignored, all after the calls to memblock_add() in m68k_parse_bootinfo(),
and thus causing crashes:
  1. On classic m68k CPUs with a MMU, paging_init() ignores all memory
     chunks below the first chunk, cfr. above,
  2. On Amigas equipped with a Zorro III bus, config_amiga() ignores all
     Zorro II memory,
  3. If CONFIG_SINGLE_MEMORY_CHUNK=y, m68k_parse_bootinfo() ignores all
     but the first memory chunk.

Fix this by moving the calls to memblock_add() from
m68k_parse_bootinfo() to paging_init(), after all ignored memory chunks
have been removed from m68k_memory[].

Reported-by: Andreas Schwab <schwab@linux-m68k.org>
Fixes: 1008a11590b966b4 ("m68k: switch to MEMBLOCK + NO_BOOTMEM")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
21 months agokbuild: fix false positive warning/error about missing libelf
Masahiro Yamada [Tue, 18 Dec 2018 05:25:41 +0000 (14:25 +0900)]
kbuild: fix false positive warning/error about missing libelf

For the same reason as commit 25896d073d8a ("x86/build: Fix compiler
support check for CONFIG_RETPOLINE"), you cannot put this $(error ...)
into the parse stage of the top Makefile.

Perhaps I'd propose a more sophisticated solution later, but this is
the best I can do for now.

Link: https://lkml.org/lkml/2017/12/25/211
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Reported-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reported-by: Qian Cai <cai@lca.pw>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Qian Cai <cai@lca.pw>
21 months agoath10k: skip sending quiet mode cmd for WCN3990
Rakesh Pillai [Fri, 14 Dec 2018 10:17:46 +0000 (12:17 +0200)]
ath10k: skip sending quiet mode cmd for WCN3990

HL2.0 firmware does not support setting quiet mode.  If the host driver sends
the quiet mode setting command to the HL2.0 firmware, it crashes with the below
signature.

fatal error received: err_qdi.c:456:EX:wlan_process:1:WLAN RT:207a:PC=b001b4f0

The quiet mode command support is exposed by the firmware via thermal throttle
wmi service. Enable ath10k thermal support if thermal throttle wmi service bit
is set.  10.x firmware versions support this feature by default, but
unfortunately do not advertise the support via service flags, hence have to
manually set the service flag in ath10k_core_compat_services().

Tested on QCA988X with 10.2.4.70.9-2. Also tested on WCN3990.

Co-developed-by: Govind Singh <govinds@codeaurora.org>
Co-developed-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
21 months agomac80211: free skb fraglist before freeing the skb
Sara Sharon [Sat, 15 Dec 2018 09:03:06 +0000 (11:03 +0200)]
mac80211: free skb fraglist before freeing the skb

mac80211 uses the frag list to build AMSDU. When freeing
the skb, it may not be really freed, since someone is still
holding a reference to it.
In that case, when TCP skb is being retransmitted, the
pointer to the frag list is being reused, while the data
in there is no longer valid.
Since we will never get frag list from the network stack,
as mac80211 doesn't advertise the capability, we can safely
free and nullify it before releasing the SKB.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
21 months agonl80211: fix memory leak if validate_pae_over_nl80211() fails
Johannes Berg [Sat, 15 Dec 2018 09:03:22 +0000 (11:03 +0200)]
nl80211: fix memory leak if validate_pae_over_nl80211() fails

If validate_pae_over_nl80211() were to fail in nl80211_crypto_settings(),
we might leak the 'connkeys' allocation. Fix this.

Fixes: 64bf3d4bc2b0 ("nl80211: Add CONTROL_PORT_OVER_NL80211 attribute")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
21 months agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
David S. Miller [Wed, 19 Dec 2018 06:30:33 +0000 (22:30 -0800)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Alexei Starovoitov says:

====================
pull-request: bpf 2018-12-18

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) promote bpf_perf_event.h to mandatory UAPI header, from Masahiro.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet/smc: fix TCP fallback socket release
Myungho Jung [Tue, 18 Dec 2018 17:02:25 +0000 (09:02 -0800)]
net/smc: fix TCP fallback socket release

clcsock can be released while kernel_accept() references it in TCP
listen worker. Also, clcsock needs to wake up before released if TCP
fallback is used and the clcsock is blocked by accept. Add a lock to
safely release clcsock and call kernel_sock_shutdown() to wake up
clcsock from accept in smc_release().

Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com
Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com
Signed-off-by: Myungho Jung <mhjungk@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agovxge: ensure data0 is initialized in when fetching firmware version information
Colin Ian King [Tue, 18 Dec 2018 15:19:47 +0000 (15:19 +0000)]
vxge: ensure data0 is initialized in when fetching firmware version information

Currently variable data0 is not being initialized so a garbage value is
being passed to vxge_hw_vpath_fw_api and this value is being written to
the rts_access_steer_data0 register.  There are other occurrances where
data0 is being initialized to zero (e.g. in function
vxge_hw_upgrade_read_version) so I think it makes sense to ensure data0
is initialized likewise to 0.

Detected by CoverityScan, CID#140696 ("Uninitialized scalar variable")

Fixes: 8424e00dfd52 ("vxge: serialize access to steering control register")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoxen/netfront: tolerate frags with no data
Juergen Gross [Tue, 18 Dec 2018 15:06:19 +0000 (16:06 +0100)]
xen/netfront: tolerate frags with no data

At least old Xen net backends seem to send frags with no real data
sometimes. In case such a fragment happens to occur with the frag limit
already reached the frontend will BUG currently even if this situation
is easily recoverable.

Modify the BUG_ON() condition accordingly.

Tested-by: Dietmar Hahn <dietmar.hahn@ts.fujitsu.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: phy: Fix the issue that netif always links up after resuming
Kunihiko Hayashi [Tue, 18 Dec 2018 07:57:04 +0000 (16:57 +0900)]
net: phy: Fix the issue that netif always links up after resuming

Even though the link is down before entering hibernation,
there is an issue that the network interface always links up after resuming
from hibernation.

If the link is still down before enabling the network interface,
and after resuming from hibernation, the phydev->state is forcibly set
to PHY_UP in mdio_bus_phy_restore(), and the link becomes up.

In suspend sequence, only if the PHY is attached, mdio_bus_phy_suspend()
calls phy_stop_machine(), and mdio_bus_phy_resume() calls
phy_start_machine().
In resume sequence, it's enough to do the same as mdio_bus_phy_resume()
because the state has been preserved.

This patch fixes the issue by calling phy_start_machine() in
mdio_bus_phy_restore() in the same way as mdio_bus_phy_resume().

Fixes: bc87922ff59d ("phy: Move PHY PM operations into phy_device")
Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agolan78xx: Resolve issue with changing MAC address
Jason Martinsen [Tue, 18 Dec 2018 05:38:22 +0000 (05:38 +0000)]
lan78xx: Resolve issue with changing MAC address

Current state for the lan78xx driver does not allow for changing the
MAC address of the interface, without either removing the module (if
you compiled it that way) or rebooting the machine.  If you attempt to
change the MAC address, ifconfig will show the new address, however,
the system/interface will not respond to any traffic using that
configuration.  A few short-term options to work around this are to
unload the module and reload it with the new MAC address, change the
interface to "promisc", or reboot with the correct configuration to
change the MAC.

This patch enables the ability to change the MAC address via fairly normal means...
ifdown <interface>
modify entry in /etc/network/interfaces OR a similar method
ifup <interface>
Then test via any network communication, such as ICMP requests to gateway.

My only test platform for this patch has been a raspberry pi model 3b+.

Signed-off-by: Jason Martinsen <jasonmartinsen@msn.com>
-----

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agolan743x: Expand phy search for LAN7431
Bryan Whitehead [Mon, 17 Dec 2018 21:44:50 +0000 (16:44 -0500)]
lan743x: Expand phy search for LAN7431

The LAN7431 uses an external phy, and it can be found anywhere in
the phy address space. This patch uses phy address 1 for LAN7430
only. And searches all addresses otherwise.

Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge branch 'vxlan-Various-fixes'
David S. Miller [Wed, 19 Dec 2018 05:18:26 +0000 (21:18 -0800)]
Merge branch 'vxlan-Various-fixes'

Petr Machata says:

====================
vxlan: Various fixes

This patch set contains three fixes for the vxlan driver.

Patch #1 fixes handling of offload mark on replaced VXLAN FDB entries. A
way to trigger this is to replace the FDB entry with one that can not be
offloaded. A future patch set should make it possible to veto such FDB
changes. However the FDB might still fail to be offloaded due to another
issue, and the offload mark should reflect that.

Patch #2 fixes problems in __vxlan_dev_create() when a call to
rtnl_configure_link() fails. These failures would be tricky to hit on a
real system, the most likely vector is through an error in vxlan_open().
However, with the abovementioned vetoing patchset, vetoing the created
entry would trigger the same problems (and be easier to reproduce).

Patch #3 fixes a problem in vxlan_changelink(). In situations where the
default remote configured in the FDB table (if any) does not exactly
match the remote address configured at the VXLAN device, changing the
remote address breaks the default FDB entry. Patch #4 is then a self
test for this issue.

v3:
- Patch #2:
    - Reuse the same errout block for both cleanup paths. Use a bool to
      decide whether the unregister_netdevice() call should be made.

v2:
- Drop former patch #3
- Patch #2:
    - Delete the default entry before calling unregister_netdevice(). That
      takes care of former patch #3, hence tweak the commit message to
      mention that problem as well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoselftests: net: Add test_vxlan_fdb_changelink.sh
Petr Machata [Tue, 18 Dec 2018 13:16:03 +0000 (13:16 +0000)]
selftests: net: Add test_vxlan_fdb_changelink.sh

Add a test to exercise the fix from the previous patch.

Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agovxlan: changelink: Fix handling of default remotes
Petr Machata [Tue, 18 Dec 2018 13:16:02 +0000 (13:16 +0000)]
vxlan: changelink: Fix handling of default remotes

Default remotes are stored as FDB entries with an Ethernet address of
00:00:00:00:00:00. When a request is made to change a remote address of
a VXLAN device, vxlan_changelink() first deletes the existing default
remote, and then creates a new FDB entry.

This works well as long as the list of default remotes matches exactly
the configuration of a VXLAN remote address. Thus when the VXLAN device
has a remote of X, there should be exactly one default remote FDB entry
X. If the VXLAN device has no remote address, there should be no such
entry.

Besides using "ip link set", it is possible to manipulate the list of
default remotes by using the "bridge fdb". It is therefore easy to break
the above condition. Under such circumstances, the __vxlan_fdb_delete()
call doesn't delete the FDB entry itself, but just one remote. The
following vxlan_fdb_create() then creates a new FDB entry, leading to a
situation where two entries exist for the address 00:00:00:00:00:00,
each with a different subset of default remotes.

An even more obvious breakage rooted in the same cause can be observed
when a remote address is configured for a VXLAN device that did not have
one before. In that case vxlan_changelink() doesn't remove any remote,
and just creates a new FDB entry for the new address:

$ ip link add name vx up type vxlan id 2000 dstport 4789
$ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.20 self permanent
$ bridge fdb ap dev vx 00:00:00:00:00:00 dst 192.0.2.30 self permanent
$ ip link set dev vx type vxlan remote 192.0.2.30
$ bridge fdb sh dev vx | grep 00:00:00:00:00:00
00:00:00:00:00:00 dst 192.0.2.30 self permanent <- new entry, 1 rdst
00:00:00:00:00:00 dst 192.0.2.20 self permanent <- orig. entry, 2 rdsts
00:00:00:00:00:00 dst 192.0.2.30 self permanent

To fix this, instead of calling vxlan_fdb_create() directly, defer to
vxlan_fdb_update(). That has logic to handle the duplicates properly.
Additionally, it also handles notifications, so drop that call from
changelink as well.

Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agovxlan: Fix error path in __vxlan_dev_create()
Petr Machata [Tue, 18 Dec 2018 13:16:00 +0000 (13:16 +0000)]
vxlan: Fix error path in __vxlan_dev_create()

When a failure occurs in rtnl_configure_link(), the current code
calls unregister_netdevice() to roll back the earlier call to
register_netdevice(), and jumps to errout, which calls
vxlan_fdb_destroy().

However unregister_netdevice() calls transitively ndo_uninit, which is
vxlan_uninit(), and that already takes care of deleting the default FDB
entry by calling vxlan_fdb_delete_default(). Since the entry added
earlier in __vxlan_dev_create() is exactly the default entry, the
cleanup code in the errout block always leads to double free and thus a
panic.

Besides, since vxlan_fdb_delete_default() always destroys the FDB entry
with notification enabled, the deletion of the default entry is notified
even before the addition was notified.

Instead, move the unregister_netdevice() call after the manual destroy,
which solves both problems.

Fixes: 0241b836732f ("vxlan: fix default fdb entry netlink notify ordering during netdev create")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agovxlan: Unmark offloaded bit on replaced FDB entries
Petr Machata [Tue, 18 Dec 2018 13:15:59 +0000 (13:15 +0000)]
vxlan: Unmark offloaded bit on replaced FDB entries

When rdst of an offloaded FDB entry is replaced, it certainly isn't
offloaded anymore. Drivers are notified about such replacements, and can
re-mark the entry as offloaded again if they so wish. However until a
driver does so explicitly, assume a replaced FDB entry is not offloaded.

Note that replaces coming via vxlan_fdb_external_learn_add() are always
immediately followed by an explicit offload marking.

Fixes: 0efe11733356 ("vxlan: Support marking RDSTs as offloaded")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge branch 'macb-DMA-race-fixes'
David S. Miller [Wed, 19 Dec 2018 00:17:49 +0000 (16:17 -0800)]
Merge branch 'macb-DMA-race-fixes'

Anssi Hannula says:

====================
net: macb: DMA race condition fixes

Here are a couple of race condition fixes for the macb driver. The first
two are for issues observed at runtime on real HW.

v2:
- added received Tested-bys and Acked-bys to the first two patches
- in patch 3/3, moved the timestamp protection barrier closer to the
  timestamp reads
- in patch 3/3, removed unnecessary move of the addr assignment in
  gem_rx() to keep the patch minimal for maximum clarity
- in patch 3/3, clarified commit message and comments

The 3/3 is the same one I improperly sent last week as a standalone
patch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: macb: add missing barriers when reading descriptors
Anssi Hannula [Mon, 17 Dec 2018 13:05:41 +0000 (15:05 +0200)]
net: macb: add missing barriers when reading descriptors

When reading buffer descriptors on RX or on TX completion, an
RX_USED/TX_USED bit is checked first to ensure that the descriptors have
been populated, i.e. the ownership has been transferred. However, there
are no memory barriers to ensure that the data protected by the
RX_USED/TX_USED bit is up-to-date with respect to that bit.

Specifically:

- TX timestamp descriptors may be loaded before ctrl is loaded for the
  TX_USED check, which is racy as the descriptors may be updated between
  the loads, causing old timestamp descriptor data to be used.

- RX ctrl may be loaded before addr is loaded for the RX_USED check,
  which is racy as a new frame may be written between the loads, causing
  old ctrl descriptor data to be used.
  This issue exists for both macb_rx() and gem_rx() variants.

Fix the races by adding DMA read memory barriers on those paths and
reordering the reads in macb_rx().

I have not observed any actual problems in practice caused by these
being missing, though.

Tested on a ZynqMP based system.

Fixes: 89e5785fc8a6 ("[PATCH] Atmel MACB ethernet driver")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: macb: fix dropped RX frames due to a race
Anssi Hannula [Mon, 17 Dec 2018 13:05:40 +0000 (15:05 +0200)]
net: macb: fix dropped RX frames due to a race

Bit RX_USED set to 0 in the address field allows the controller to write
data to the receive buffer descriptor.

The driver does not ensure the ctrl field is ready (cleared) when the
controller sees the RX_USED=0 written by the driver. The ctrl field might
only be cleared after the controller has already updated it according to
a newly received frame, causing the frame to be discarded in gem_rx() due
to unexpected ctrl field contents.

A message is logged when the above scenario occurs:

  macb ff0b0000.ethernet eth0: not whole frame pointed by descriptor

Fix the issue by ensuring that when the controller sees RX_USED=0 the
ctrl field is already cleared.

This issue was observed on a ZynqMP based system.

Fixes: 4df95131ea80 ("net/macb: change RX path for GEM")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: macb: fix random memory corruption on RX with 64-bit DMA
Anssi Hannula [Mon, 17 Dec 2018 13:05:39 +0000 (15:05 +0200)]
net: macb: fix random memory corruption on RX with 64-bit DMA

64-bit DMA addresses are split in upper and lower halves that are
written in separate fields on GEM. For RX, bit 0 of the address is used
as the ownership bit (RX_USED). When the RX_USED bit is unset the
controller is allowed to write data to the buffer.

The driver does not guarantee that the controller already sees the upper
half when the RX_USED bit is cleared, possibly resulting in the
controller writing an incoming frame to an address with an incorrect
upper half and therefore possibly corrupting unrelated system memory.

Fix that by adding the necessary DMA memory barrier between the writes.

This corruption was observed on a ZynqMP based system.

Fixes: fff8019a08b6 ("net: macb: Add 64 bit addressing support for GEM")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Acked-by: Harini Katakam <harini.katakam@xilinx.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: Use __kernel_clockid_t in uapi net_stamp.h
Davide Caratti [Mon, 17 Dec 2018 10:26:38 +0000 (11:26 +0100)]
net: Use __kernel_clockid_t in uapi net_stamp.h

Herton reports the following error when building a userspace program that
includes net_stamp.h:

 In file included from foo.c:2:
 /usr/include/linux/net_tstamp.h:158:2: error: unknown type name
 ‘clockid_t’
   clockid_t clockid; /* reference clockid */
   ^~~~~~~~~

Fix it by using __kernel_clockid_t in place of clockid_t.

Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Cc: Timothy Redaelli <tredaelli@redhat.com>
Reported-by: Herton R. Krzesinski <herton@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Tested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: macb: restart tx after tx used bit read
Claudiu Beznea [Mon, 17 Dec 2018 10:02:42 +0000 (10:02 +0000)]
net: macb: restart tx after tx used bit read

On some platforms (currently detected only on SAMA5D4) TX might stuck
even the pachets are still present in DMA memories and TX start was
issued for them. This happens due to race condition between MACB driver
updating next TX buffer descriptor to be used and IP reading the same
descriptor. In such a case, the "TX USED BIT READ" interrupt is asserted.
GEM/MACB user guide specifies that if a "TX USED BIT READ" interrupt
is asserted TX must be restarted. Restart TX if used bit is read and
packets are present in software TX queue. Packets are removed from software
TX queue if TX was successful for them (see macb_tx_interrupt()).

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge tag 'for-linus-20181218' of git://git.kernel.dk/linux-block
Linus Torvalds [Tue, 18 Dec 2018 23:47:40 +0000 (15:47 -0800)]
Merge tag 'for-linus-20181218' of git://git.kernel.dk/linux-block

Pull block fix from Jens Axboe:
 "Correct an ioctl direction for the zoned ioctls"

* tag 'for-linus-20181218' of git://git.kernel.dk/linux-block:
  uapi: linux/blkzoned.h: fix BLKGETZONESZ and BLKGETNRZONES definitions

21 months agoMerge tag 'pci-v4.20-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaa...
Linus Torvalds [Tue, 18 Dec 2018 23:45:38 +0000 (15:45 -0800)]
Merge tag 'pci-v4.20-fixes-4' of git://git./linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "Fix the ACPI APEI error path, which previously queued several
  uninitialized events (Yanjiang Jin)"

* tag 'pci-v4.20-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI/AER: Queue one GHES event, not several uninitialized ones

21 months agonet: stmmac: Fix an error code in probe()
Dan Carpenter [Mon, 17 Dec 2018 08:06:06 +0000 (11:06 +0300)]
net: stmmac: Fix an error code in probe()

The function should return an error if create_singlethread_workqueue()
fails.

Fixes: 34877a15f787 ("net: stmmac: Rework and fix TX Timeout code")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agotipc: check group dests after tipc_wait_for_cond()
Cong Wang [Mon, 17 Dec 2018 07:25:12 +0000 (23:25 -0800)]
tipc: check group dests after tipc_wait_for_cond()

Similar to commit 143ece654f9f ("tipc: check tsk->group in tipc_wait_for_cond()")
we have to reload grp->dests too after we re-take the sock lock.
This means we need to move the dsts check after tipc_wait_for_cond()
too.

Fixes: 75da2163dbb6 ("tipc: introduce communication groups")
Reported-and-tested-by: syzbot+99f20222fc5018d2b97a@syzkaller.appspotmail.com
Cc: Ying Xue <ying.xue@windriver.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoqed: Fix an error code qed_ll2_start_xmit()
Dan Carpenter [Mon, 17 Dec 2018 07:05:13 +0000 (10:05 +0300)]
qed: Fix an error code qed_ll2_start_xmit()

We accidentally deleted the code to set "rc = -ENOMEM;" and this patch
adds it back.

Fixes: d2201a21598a ("qed: No need for LL2 frags indication")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: mvpp2: 10G modes aren't supported on all ports
Antoine Tenart [Tue, 11 Dec 2018 16:32:28 +0000 (17:32 +0100)]
net: mvpp2: 10G modes aren't supported on all ports

The mvpp2_phylink_validate() function sets all modes that are
supported by a given PPv2 port. A recent change made all ports to
advertise they support 10G modes in certain cases. This is not true,
as only the port #0 can do so. This patch fixes it.

Fixes: 01b3fd5ac97c ("net: mvpp2: fix detection of 10G SFP modules")
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agokvm: x86: Add AMD's EX_CFG to the list of ignored MSRs
Eduardo Habkost [Tue, 18 Dec 2018 00:34:18 +0000 (22:34 -0200)]
kvm: x86: Add AMD's EX_CFG to the list of ignored MSRs

Some guests OSes (including Windows 10) write to MSR 0xc001102c
on some cases (possibly while trying to apply a CPU errata).
Make KVM ignore reads and writes to that MSR, so the guest won't
crash.

The MSR is documented as "Execution Unit Configuration (EX_CFG)",
at AMD's "BIOS and Kernel Developer's Guide (BKDG) for AMD Family
15h Models 00h-0Fh Processors".

Cc: stable@vger.kernel.org
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
21 months agoKVM: X86: Fix NULL deref in vcpu_scan_ioapic
Wanpeng Li [Mon, 17 Dec 2018 02:43:23 +0000 (10:43 +0800)]
KVM: X86: Fix NULL deref in vcpu_scan_ioapic

Reported by syzkaller:

    CPU: 1 PID: 5962 Comm: syz-executor118 Not tainted 4.20.0-rc6+ #374
    Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
    RIP: 0010:kvm_apic_hw_enabled arch/x86/kvm/lapic.h:169 [inline]
    RIP: 0010:vcpu_scan_ioapic arch/x86/kvm/x86.c:7449 [inline]
    RIP: 0010:vcpu_enter_guest arch/x86/kvm/x86.c:7602 [inline]
    RIP: 0010:vcpu_run arch/x86/kvm/x86.c:7874 [inline]
    RIP: 0010:kvm_arch_vcpu_ioctl_run+0x5296/0x7320 arch/x86/kvm/x86.c:8074
    Call Trace:
 kvm_vcpu_ioctl+0x5c8/0x1150 arch/x86/kvm/../../../virt/kvm/kvm_main.c:2596
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0x1de/0x1790 fs/ioctl.c:696
 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The reason is that the testcase writes hyperv synic HV_X64_MSR_SINT14 msr
and triggers scan ioapic logic to load synic vectors into EOI exit bitmap.
However, irqchip is not initialized by this simple testcase, ioapic/apic
objects should not be accessed.

This patch fixes it by also considering whether or not apic is present.

Reported-by: syzbot+39810e6c400efadfef71@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
21 months agoKVM: Fix UAF in nested posted interrupt processing
Cfir Cohen [Tue, 18 Dec 2018 16:18:41 +0000 (08:18 -0800)]
KVM: Fix UAF in nested posted interrupt processing

nested_get_vmcs12_pages() processes the posted_intr address in vmcs12. It
caches the kmap()ed page object and pointer, however, it doesn't handle
errors correctly: it's possible to cache a valid pointer, then release
the page and later dereference the dangling pointer.

I was able to reproduce with the following steps:

1. Call vmlaunch with valid posted_intr_desc_addr but an invalid
MSR_EFER. This causes nested_get_vmcs12_pages() to cache the kmap()ed
pi_desc_page and pi_desc. Later the invalid EFER value fails
check_vmentry_postreqs() which fails the first vmlaunch.

2. Call vmlanuch with a valid EFER but an invalid posted_intr_desc_addr
(I set it to 2G - 0x80). The second time we call nested_get_vmcs12_pages
pi_desc_page is unmapped and released and pi_desc_page is set to NULL
(the "shouldn't happen" clause). Due to the invalid
posted_intr_desc_addr, kvm_vcpu_gpa_to_page() fails and
nested_get_vmcs12_pages() returns. It doesn't return an error value so
vmlaunch proceeds. Note that at this time we have a dangling pointer in
vmx->nested.pi_desc and POSTED_INTR_DESC_ADDR in L0's vmcs.

3. Issue an IPI in L2 guest code. This triggers a call to
vmx_complete_nested_posted_interrupt() and pi_test_and_clear_on() which
dereferences the dangling pointer.

Vulnerable code requires nested and enable_apicv variables to be set to
true. The host CPU must also support posted interrupts.

Fixes: 5e2f30b756a37 "KVM: nVMX: get rid of nested_get_page()"
Cc: stable@vger.kernel.org
Reviewed-by: Andy Honig <ahonig@google.com>
Signed-off-by: Cfir Cohen <cfir@google.com>
Reviewed-by: Liran Alon <liran.alon@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
21 months agoKVM: fix unregistering coalesced mmio zone from wrong bus
Eric Biggers [Mon, 17 Dec 2018 17:36:19 +0000 (09:36 -0800)]
KVM: fix unregistering coalesced mmio zone from wrong bus

If you register a kvm_coalesced_mmio_zone with '.pio = 0' but then
unregister it with '.pio = 1', KVM_UNREGISTER_COALESCED_MMIO will try to
unregister it from KVM_PIO_BUS rather than KVM_MMIO_BUS, which is a
no-op.  But it frees the kvm_coalesced_mmio_dev anyway, causing a
use-after-free.

Fix it by only unregistering and freeing the zone if the correct value
of 'pio' is provided.

Reported-by: syzbot+f87f60bb6f13f39b54e3@syzkaller.appspotmail.com
Fixes: 0804c849f1df ("kvm/x86 : add coalesced pio support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
21 months agoVSOCK: Send reset control packet when socket is partially bound
Jorgen Hansen [Tue, 18 Dec 2018 08:34:06 +0000 (00:34 -0800)]
VSOCK: Send reset control packet when socket is partially bound

If a server side socket is bound to an address, but not in the listening
state yet, incoming connection requests should receive a reset control
packet in response. However, the function used to send the reset
silently drops the reset packet if the sending socket isn't bound
to a remote address (as is the case for a bound socket not yet in
the listening state). This change fixes this by using the src
of the incoming packet as destination for the reset packet in
this case.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
David S. Miller [Tue, 18 Dec 2018 19:43:26 +0000 (11:43 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2018-12-18

1) Fix error return code in xfrm_output_one()
   when no dst_entry is attached to the skb.
   From Wei Yongjun.

2) The xfrm state hash bucket count reported to
   userspace is off by one. Fix from Benjamin Poirier.

3) Fix NULL pointer dereference in xfrm_input when
   skb_dst_force clears the dst_entry.

4) Fix freeing of xfrm states on acquire. We use a
   dedicated slab cache for the xfrm states now,
   so free it properly with kmem_cache_free.
   From Mathias Krause.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Tue, 18 Dec 2018 17:38:34 +0000 (09:38 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Three fixes: The t10-pi one is a regression from the 4.19 release, the
  qla2xxx one is a 4.20 merge window regression and the bnx2fc is a very
  old bug"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: t10-pi: Return correct ref tag when queue has no integrity profile
  scsi: bnx2fc: Fix NULL dereference in error handling
  Revert "scsi: qla2xxx: Fix NVMe Target discovery"

21 months agoMerge branch 'mlxsw-VXLAN-and-firmware-flashing-fixes'
David S. Miller [Tue, 18 Dec 2018 17:17:39 +0000 (09:17 -0800)]
Merge branch 'mlxsw-VXLAN-and-firmware-flashing-fixes'

Ido Schimmel says:

====================
mlxsw: VXLAN and firmware flashing fixes

Patch #1 fixes firmware flashing failures by increasing the time period
after which the driver fails the transaction with the firmware. The
problem is explained in detail in the commit message.

Patch #2 adds a missing trap for decapsulated ARP packets. It is
necessary for VXLAN routing to work.

Patch #3 fixes a memory leak during driver reload caused by NULLing a
pointer before kfree().

Please consider patch #1 for 4.19.y
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agomlxsw: spectrum_nve: Fix memory leak upon driver reload
Ido Schimmel [Tue, 18 Dec 2018 15:59:23 +0000 (15:59 +0000)]
mlxsw: spectrum_nve: Fix memory leak upon driver reload

The pointer was NULLed before freeing the memory, resulting in a memory
leak. Trace from kmemleak:

unreferenced object 0xffff88820ae36528 (size 512):
  comm "devlink", pid 5374, jiffies 4295354033 (age 10829.296s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000a43f5195>] kmem_cache_alloc_trace+0x1be/0x330
    [<00000000312f8140>] mlxsw_sp_nve_init+0xcb/0x1ae0
    [<0000000009201d22>] mlxsw_sp_init+0x1382/0x2690
    [<000000007227d877>] mlxsw_sp1_init+0x1b5/0x260
    [<000000004a16feec>] __mlxsw_core_bus_device_register+0x776/0x1360
    [<0000000070ab954c>] mlxsw_devlink_core_bus_device_reload+0x129/0x220
    [<00000000432313d5>] devlink_nl_cmd_reload+0x119/0x1e0
    [<000000003821a06b>] genl_family_rcv_msg+0x813/0x1150
    [<00000000d54d04c0>] genl_rcv_msg+0xd1/0x180
    [<0000000040543d12>] netlink_rcv_skb+0x152/0x3c0
    [<00000000efc4eae8>] genl_rcv+0x2d/0x40
    [<00000000ea645603>] netlink_unicast+0x52f/0x740
    [<00000000641fca1a>] netlink_sendmsg+0x9c7/0xf50
    [<00000000fed4a4b8>] sock_sendmsg+0xbe/0x120
    [<00000000d85795a9>] __sys_sendto+0x397/0x620
    [<00000000c5f84622>] __x64_sys_sendto+0xe6/0x1a0

Fixes: 6e6030bd5412 ("mlxsw: spectrum_nve: Implement common NVE core")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agomlxsw: spectrum: Add trap for decapsulated ARP packets
Ido Schimmel [Tue, 18 Dec 2018 15:59:22 +0000 (15:59 +0000)]
mlxsw: spectrum: Add trap for decapsulated ARP packets

After a packet was decapsulated it is classified to the relevant FID
based on its VNI and undergoes L2 forwarding.

Unlike regular (non-encapsulated) ARP packets, Spectrum does not trap
decapsulated ARP packets during L2 forwarding and instead can only trap
such packets in the underlay router during decapsulation.

Add this missing packet trap, which is required for VXLAN routing when
the MAC of the target host is not known.

Fixes: b02597d513a9 ("mlxsw: spectrum: Add NVE packet traps")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agomlxsw: core: Increase timeout during firmware flash process
Shalom Toledo [Tue, 18 Dec 2018 15:59:20 +0000 (15:59 +0000)]
mlxsw: core: Increase timeout during firmware flash process

During the firmware flash process, some of the EMADs get timed out, which
causes the driver to send them again with a limit of 5 retries. There are
some situations in which 5 retries is not enough and the EMAD access fails.
If the failed EMAD was related to the flashing process, the driver fails
the flashing.

The reason for these timeouts during firmware flashing is cache misses in
the CPU running the firmware. In case the CPU needs to fetch instructions
from the flash when a firmware is flashed, it needs to wait for the
flashing to complete. Since flashing takes time, it is possible for pending
EMADs to timeout.

Fix by increasing EMADs' timeout while flashing firmware.

Fixes: ce6ef68f433f ("mlxsw: spectrum: Implement the ethtool flash_device callback")
Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoSUNRPC: Remove xprt_connect_status()
Trond Myklebust [Mon, 17 Dec 2018 22:33:33 +0000 (17:33 -0500)]
SUNRPC: Remove xprt_connect_status()

Over the years, xprt_connect_status() has been superseded by
call_connect_status(), which now handles all the errors that
xprt_connect_status() does and more. Since the latter converts
all errors that it doesn't recognise to EIO, then it is time
for it to be retired.

Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
21 months agoSUNRPC: Fix a race with XPRT_CONNECTING
Trond Myklebust [Mon, 17 Dec 2018 22:38:51 +0000 (17:38 -0500)]
SUNRPC: Fix a race with XPRT_CONNECTING

Ensure that we clear XPRT_CONNECTING before releasing the XPRT_LOCK so that
we don't have races between the (asynchronous) socket setup code and
tasks in xprt_connect().

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
21 months agoSUNRPC: Fix disconnection races
Trond Myklebust [Mon, 17 Dec 2018 18:34:59 +0000 (13:34 -0500)]
SUNRPC: Fix disconnection races

When the socket is closed, we need to call xprt_disconnect_done() in order
to clean up the XPRT_WRITE_SPACE flag, and wake up the sleeping tasks.

However, we also want to ensure that we don't wake them up before the socket
is closed, since that would cause thundering herd issues with everyone
piling up to retransmit before the TCP shutdown dance has completed.
Only the task that holds XPRT_LOCKED needs to wake up early in order to
allow the close to complete.

Reported-by: Dave Wysochanski <dwysocha@redhat.com>
Reported-by: Scott Mayhew <smayhew@redhat.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
21 months agomac80211: fix a kernel panic when TXing after TXQ teardown
Sara Sharon [Sat, 15 Dec 2018 09:03:10 +0000 (11:03 +0200)]
mac80211: fix a kernel panic when TXing after TXQ teardown

Recently TXQ teardown was moved earlier in ieee80211_unregister_hw(),
to avoid a use-after-free of the netdev data. However, interfaces
aren't fully removed at the point, and cfg80211_shutdown_all_interfaces
can for example, TX a deauth frame. Move the TXQ teardown to the
point between cfg80211_shutdown_all_interfaces and the free of
netdev queues, so we can be sure they are torn down before netdev
is freed, but after there is no ongoing TX.

Fixes: 77cfaf52eca5 ("mac80211: Run TXQ teardown code before de-registering interfaces")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
21 months agonet: dsa: mv88e6xxx: set ethtool regs version
Vivien Didelot [Mon, 17 Dec 2018 21:05:21 +0000 (16:05 -0500)]
net: dsa: mv88e6xxx: set ethtool regs version

Currently the ethtool_regs version is set to 0 for all DSA drivers.

Use this field to store the chip ID to simplify the pretty dump of
any interfaces registered by the "dsa" driver.

Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge branch 'net-SO_TIMESTAMPING-fixes'
David S. Miller [Tue, 18 Dec 2018 07:27:01 +0000 (23:27 -0800)]
Merge branch 'net-SO_TIMESTAMPING-fixes'

Willem de Bruijn says:

====================
net: SO_TIMESTAMPING fixes

Fix two omissions:

- tx timestamping is missing for AF_INET6/SOCK_RAW/IPPROTO_RAW
- SOF_TIMESTAMPING_OPT_ID is missing for IPPROTO_RAW, PF_PACKET, CAN

Discovered while expanding the selftest in

  tools/testing/selftests/networking/timestamping/txtimestamp.c

Will send the test patchset to net-next once the fixes make it to that
branch. For now, it is available at

  https://github.com/wdebruij/linux/commits/txtimestamp-test-1
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: add missing SOF_TIMESTAMPING_OPT_ID support
Willem de Bruijn [Mon, 17 Dec 2018 17:24:00 +0000 (12:24 -0500)]
net: add missing SOF_TIMESTAMPING_OPT_ID support

SOF_TIMESTAMPING_OPT_ID is supported on TCP, UDP and RAW sockets.
But it was missing on RAW with IPPROTO_IP, PF_PACKET and CAN.

Add skb_setup_tx_timestamp that configures both tx_flags and tskey
for these paths that do not need corking or use bytestream keys.

Fixes: 09c2d251b707 ("net-timestamp: add key to disambiguate concurrent datagrams")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoipv6: add missing tx timestamping on IPPROTO_RAW
Willem de Bruijn [Mon, 17 Dec 2018 17:23:59 +0000 (12:23 -0500)]
ipv6: add missing tx timestamping on IPPROTO_RAW

Raw sockets support tx timestamping, but one case is missing.

IPPROTO_RAW takes a separate packet construction path. raw_send_hdrinc
has an explicit call to sock_tx_timestamp, but rawv6_send_hdrinc does
not. Add it.

Fixes: 11878b40ed5c ("net-timestamp: SOCK_RAW and PING timestamping")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoima: cleanup the match_token policy code
Mimi Zohar [Tue, 18 Dec 2018 00:14:49 +0000 (19:14 -0500)]
ima: cleanup the match_token policy code

Start the policy_tokens and the associated enumeration from zero,
simplifying the pt macro.

Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
21 months agosecurity: don't use a negative Opt_err token index
Linus Torvalds [Mon, 17 Dec 2018 19:39:57 +0000 (11:39 -0800)]
security: don't use a negative Opt_err token index

The code uses a bitmap to check for duplicate tokens during parsing, and
that doesn't work at all for the negative Opt_err token case.

There is absolutely no reason to make Opt_err be negative, and in fact
it only confuses things, since some of the affected functions actually
return a positive Opt_xyz enum _or_ a regular negative error code (eg
-EINVAL), and using -1 for Opt_err makes no sense.

There are similar problems in ima_policy.c and key encryption, but they
don't have the immediate bug wrt bitmap handing, and ima_policy.c in
particular needs a different patch to make the enum values match the
token array index.  Mimi is sending that separately.

Reported-by: syzbot+a22e0dc07567662c50bc@syzkaller.appspotmail.com
Reported-by: Eric Biggers <ebiggers@kernel.org>
Fixes: 5208cc83423d ("keys, trusted: fix: *do not* allow duplicate key options")
Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]")
Cc: James Morris James Morris <jmorris@namei.org>
Cc: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
21 months agoMAINTAINERS: change my email address
Vivien Didelot [Mon, 17 Dec 2018 21:29:01 +0000 (16:29 -0500)]
MAINTAINERS: change my email address

Make my Gmail address the primary one from now on.

Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agobpf: promote bpf_perf_event.h to mandatory UAPI header
Masahiro Yamada [Sun, 16 Dec 2018 15:04:40 +0000 (00:04 +0900)]
bpf: promote bpf_perf_event.h to mandatory UAPI header

Since commit c895f6f703ad ("bpf: correct broken uapi for
BPF_PROG_TYPE_PERF_EVENT program type"), all architectures
(except um) are required to have bpf_perf_event.h in uapi/asm.

Add it to mandatory-y so "make headers_install" can check it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
21 months agodma-direct: do not include SME mask in the DMA supported check
Lendacky, Thomas [Mon, 17 Dec 2018 14:39:16 +0000 (14:39 +0000)]
dma-direct: do not include SME mask in the DMA supported check

The dma_direct_supported() function intends to check the DMA mask against
specific values. However, the phys_to_dma() function includes the SME
encryption mask, which defeats the intended purpose of the check. This
results in drivers that support less than 48-bit DMA (SME encryption mask
is bit 47) from being able to set the DMA mask successfully when SME is
active, which results in the driver failing to initialize.

Change the function used to check the mask from phys_to_dma() to
__phys_to_dma() so that the SME encryption mask is not part of the check.

Fixes: c1d0af1a1d5d ("kernel/dma/direct: take DMA offset into account in dma_direct_supported")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
21 months agoRevert "serial: 8250: Fix clearing FIFOs in RS485 mode again"
Paul Burton [Sun, 16 Dec 2018 20:10:01 +0000 (20:10 +0000)]
Revert "serial: 8250: Fix clearing FIFOs in RS485 mode again"

Commit f6aa5beb45be ("serial: 8250: Fix clearing FIFOs in RS485 mode
again") makes a change to FIFO clearing code which its commit message
suggests was intended to be specific to use with RS485 mode, however:

 1) The change made does not just affect __do_stop_tx_rs485(), it also
    affects other uses of serial8250_clear_fifos() including paths for
    starting up, shutting down or auto-configuring a port regardless of
    whether it's an RS485 port or not.

 2) It makes the assumption that resetting the FIFOs is a no-op when
    FIFOs are disabled, and as such it checks for this case & explicitly
    avoids setting the FIFO reset bits when the FIFO enable bit is
    clear. A reading of the PC16550D manual would suggest that this is
    OK since the FIFO should automatically be reset if it is later
    enabled, but we support many 16550-compatible devices and have never
    required this auto-reset behaviour for at least the whole git era.
    Starting to rely on it now seems risky, offers no benefit, and
    indeed breaks at least the Ingenic JZ4780's UARTs which reads
    garbage when the RX FIFO is enabled if we don't explicitly reset it.

 3) By only resetting the FIFOs if they're enabled, the behaviour of
    serial8250_do_startup() during boot now depends on what the value of
    FCR is before the 8250 driver is probed. This in itself seems
    questionable and leaves us with FCR=0 & no FIFO reset if the UART
    was used by 8250_early, otherwise it depends upon what the
    bootloader left behind.

 4) Although the naming of serial8250_clear_fifos() may be unclear, it
    is clear that callers of it expect that it will disable FIFOs. Both
    serial8250_do_startup() & serial8250_do_shutdown() contain comments
    to that effect, and other callers explicitly re-enable the FIFOs
    after calling serial8250_clear_fifos(). The premise of that patch
    that disabling the FIFOs is incorrect therefore seems wrong.

For these reasons, this reverts commit f6aa5beb45be ("serial: 8250: Fix
clearing FIFOs in RS485 mode again").

Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: f6aa5beb45be ("serial: 8250: Fix clearing FIFOs in RS485 mode again").
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Jedrychowski <avistel@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-serial@vger.kernel.org
Cc: stable <stable@vger.kernel.org> # 4.10+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
21 months agoUSB: xhci: fix 'broken_suspend' placement in struct xchi_hcd
Nicolas Saenz Julienne [Mon, 17 Dec 2018 13:37:40 +0000 (14:37 +0100)]
USB: xhci: fix 'broken_suspend' placement in struct xchi_hcd

As commented in the struct's definition there shouldn't be anything
underneath its 'priv[0]' member as it would break some macros.

The patch converts the broken_suspend into a bit-field and relocates it
next to to the rest of bit-fields.

Fixes: a7d57abcc8a5 ("xhci: workaround CSS timeout on AMD SNPS 3.0 xHC")
Reported-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
21 months agoiwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares
Emmanuel Grumbach [Fri, 14 Dec 2018 16:30:22 +0000 (18:30 +0200)]
iwlwifi: mvm: don't send GEO_TX_POWER_LIMIT to old firmwares

Old firmware versions don't support this command. Sending it
to any firmware before -41.ucode will crash the firmware.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201975

Fixes: 66e839030fd6 ("iwlwifi: fix wrong WGDS_WIFI_DATA_SIZE")
CC: <stable@vger.kernel.org> #4.19+
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
21 months agommc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl
Ulf Hansson [Mon, 10 Dec 2018 16:52:38 +0000 (17:52 +0100)]
mmc: core: Use a minimum 1600ms timeout when enabling CACHE ctrl

Some eMMCs from Micron have been reported to need ~800 ms timeout, while
enabling the CACHE ctrl after running sudden power failure tests. The
needed timeout is greater than what the card specifies as its generic CMD6
timeout, through the EXT_CSD register, hence the problem.

Normally we would introduce a card quirk to extend the timeout for these
specific Micron cards. However, due to the rather complicated debug process
needed to find out the error, let's simply use a minimum timeout of 1600ms,
the double of what has been reported, for all cards when enabling CACHE
ctrl.

Reported-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reported-by: Andreas Dannenberg <dannenberg@ti.com>
Reported-by: Faiz Abbas <faiz_abbas@ti.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
21 months agommc: core: Allow BKOPS and CACHE ctrl even if no HPI support
Ulf Hansson [Mon, 10 Dec 2018 16:52:37 +0000 (17:52 +0100)]
mmc: core: Allow BKOPS and CACHE ctrl even if no HPI support

In commit 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC
cards"), then intent was to prevent HPI from being used for some eMMC
cards, which didn't properly support it. However, that went too far, as
even BKOPS and CACHE ctrl became prevented. Let's restore those parts and
allow BKOPS and CACHE ctrl even if HPI isn't supported.

Fixes: 5320226a0512 ("mmc: core: Disable HPI for certain Hynix eMMC cards")
Cc: Pratibhasagar V <pratibha@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
21 months agommc: core: Reset HPI enabled state during re-init and in case of errors
Ulf Hansson [Mon, 10 Dec 2018 16:52:36 +0000 (17:52 +0100)]
mmc: core: Reset HPI enabled state during re-init and in case of errors

During a re-initialization of the eMMC card, we may fail to re-enable HPI.
In these cases, that isn't properly reflected in the card->ext_csd.hpi_en
bit, as it keeps being set. This may cause following attempts to use HPI,
even if's not enabled. Let's fix this!

Fixes: eb0d8f135b67 ("mmc: core: support HPI send command")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
21 months agommc: omap_hsmmc: fix DMA API warning
Russell King [Tue, 11 Dec 2018 14:41:31 +0000 (14:41 +0000)]
mmc: omap_hsmmc: fix DMA API warning

While booting with rootfs on MMC, the following warning is encountered
on OMAP4430:

omap-dma-engine 4a056000.dma-controller: DMA-API: mapping sg segment longer than device claims to support [len=69632] [max=65536]

This is because the DMA engine has a default maximum segment size of 64K
but HSMMC sets:

        mmc->max_blk_size = 512;       /* Block Length at max can be 1024 */
        mmc->max_blk_count = 0xFFFF;    /* No. of Blocks is 16 bits */
        mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
        mmc->max_seg_size = mmc->max_req_size;

which ends up telling the block layer that we support a maximum segment
size of 65535*512, which exceeds the advertised DMA engine capabilities.

Fix this by clamping the maximum segment size to the lower of the
maximum request size and of the DMA engine device used for either DMA
channel.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
21 months agommc: tegra: Fix for SDMMC pads autocal parsing from dt
Sowjanya Komatineni [Thu, 13 Dec 2018 20:25:43 +0000 (12:25 -0800)]
mmc: tegra: Fix for SDMMC pads autocal parsing from dt

Some of the SDMMC pads auto calibration values parsed from
devicetree are assigned incorrectly. This patch fixes it.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Fixes: 51b77c8ea784 ("mmc: tegra: Program pad autocal offsets from dt")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
21 months agommc: sdhci: Fix sdhci_do_enable_v4_mode
Sowjanya Komatineni [Thu, 13 Dec 2018 20:34:06 +0000 (12:34 -0800)]
mmc: sdhci: Fix sdhci_do_enable_v4_mode

V4_MODE is Bit-15 of SDHCI_HOST_CONTROL2 register.
Need to perform word access to this register.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Fixes: b3f80b434f72 ("mmc: sdhci: Add sd host v4 mode")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
21 months agouapi: linux/blkzoned.h: fix BLKGETZONESZ and BLKGETNRZONES definitions
Dmitry V. Levin [Sun, 16 Dec 2018 01:49:52 +0000 (04:49 +0300)]
uapi: linux/blkzoned.h: fix BLKGETZONESZ and BLKGETNRZONES definitions

According to the documentation in include/uapi/asm-generic/ioctl.h,
_IOW means userspace is writing and kernel is reading, and
_IOR means userspace is reading and kernel is writing.

In case of these two ioctls, kernel is writing and userspace is reading,
so they have to be _IOR instead of _IOW.

Fixes: 72cd87576d1d8 ("block: Introduce BLKGETZONESZ ioctl")
Fixes: 65e4e3eee83d7 ("block: Introduce BLKGETNRZONES ioctl")
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
21 months agoLinux 4.20-rc7 v4.20-rc7
Linus Torvalds [Sun, 16 Dec 2018 23:46:55 +0000 (15:46 -0800)]
Linux 4.20-rc7

21 months agonet: mvneta: fix operation for 64K PAGE_SIZE
Marcin Wojtas [Tue, 11 Dec 2018 12:56:49 +0000 (13:56 +0100)]
net: mvneta: fix operation for 64K PAGE_SIZE

Recent changes in the mvneta driver reworked allocation
and handling of the ingress buffers to use entire pages.
Apart from that in SW BM scenario the HW must be informed
via PRXDQS about the biggest possible incoming buffer
that can be propagated by RX descriptors.

The BufferSize field was filled according to the MTU-dependent
pkt_size value. Later change to PAGE_SIZE broke RX operation
when usin 64K pages, as the field is simply too small.

This patch conditionally limits the value passed to the BufferSize
of the PRXDQS register, depending on the PAGE_SIZE used.
On the occasion remove now unused frag_size field of the mvneta_port
structure.

Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agoMerge branch 'hns-fixes'
David S. Miller [Sun, 16 Dec 2018 20:07:32 +0000 (12:07 -0800)]
Merge branch 'hns-fixes'

Peng Li says:

====================
net: hns: Code improvements & fixes for HNS driver

This patchset introduces some code improvements and fixes
for the identified problems in the HNS driver.

Every patch is independent.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: hns: Fix ping failed when use net bridge and send multicast
Yonglong Liu [Sat, 15 Dec 2018 03:53:29 +0000 (11:53 +0800)]
net: hns: Fix ping failed when use net bridge and send multicast

Create a net bridge, add eth and vnet to the bridge. The vnet is used
by a virtual machine. When ping the virtual machine from the outside
host and the virtual machine send multicast at the same time, the ping
package will lost.

The multicast package send to the eth, eth will send it to the bridge too,
and the bridge learn the mac of eth. When outside host ping the virtual
mechine, it will match the promisc entry of the eth which is not expected,
and the bridge send it to eth not to vnet, cause ping lost.

So this patch change promisc tcam entry position to the END of 512 tcam
entries, which indicate lower priority. And separate one promisc entry to
two: mc & uc, to avoid package match the wrong tcam entry.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
21 months agonet: hns: Add mac pcs config when enable|disable mac
Yonglong Liu [Sat, 15 Dec 2018 03:53:28 +0000 (11:53 +0800)]
net: hns: Add mac pcs config when enable|disable mac

In some case, when mac enable|disable and adjust link, may cause hard to
link(or abnormal) between mac and phy. This patch adds the code for rx PCS
to avoid this bug.

Disable the rx PCS when driver disable the gmac, and enable the rx PCS
when driver enable the mac.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>