sfrench/cifs-2.6.git
6 years agoKVM: vmx: VMXOFF emulation in vm86 should cause #UD
Nadav Amit [Fri, 29 Aug 2014 08:26:55 +0000 (11:26 +0300)]
KVM: vmx: VMXOFF emulation in vm86 should cause #UD

Unlike VMCALL, the instructions VMXOFF, VMLAUNCH and VMRESUME should cause a UD
exception in real-mode or vm86.  However, the emulator considers all these
instructions the same for the matter of mode checks, and emulation upon exit
due to #UD exception.

As a result, the hypervisor behaves incorrectly on vm86 mode. VMXOFF, VMLAUNCH
or VMRESUME cause on vm86 exit due to #UD. The hypervisor then emulates these
instruction and inject #GP to the guest instead of #UD.

This patch creates a new group for these instructions and mark only VMCALL as
an instruction which can be emulated.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: fix some sparse warnings
Paolo Bonzini [Tue, 26 Aug 2014 11:27:46 +0000 (13:27 +0200)]
KVM: x86: fix some sparse warnings

Sparse reports the following easily fixed warnings:

   arch/x86/kvm/vmx.c:8795:48: sparse: Using plain integer as NULL pointer
   arch/x86/kvm/vmx.c:2138:5: sparse: symbol vmx_read_l1_tsc was not declared. Should it be static?
   arch/x86/kvm/vmx.c:6151:48: sparse: Using plain integer as NULL pointer
   arch/x86/kvm/vmx.c:8851:6: sparse: symbol vmx_sched_in was not declared. Should it be static?

   arch/x86/kvm/svm.c:2162:5: sparse: symbol svm_read_l1_tsc was not declared. Should it be static?

Cc: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: nVMX: nested TPR shadow/threshold emulation
Wanpeng Li [Thu, 21 Aug 2014 11:46:50 +0000 (19:46 +0800)]
KVM: nVMX: nested TPR shadow/threshold emulation

This patch fix bug https://bugzilla.kernel.org/show_bug.cgi?id=61411

TPR shadow/threshold feature is important to speed up the Windows guest.
Besides, it is a must feature for certain VMM.

We map virtual APIC page address and TPR threshold from L1 VMCS. If
TPR_BELOW_THRESHOLD VM exit is triggered by L2 guest and L1 interested
in, we inject it into L1 VMM for handling.

Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
[Add PAGE_ALIGNED check, do not write useless virtual APIC page address
 if TPR shadowing is disabled. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: nVMX: introduce nested_get_vmcs12_pages
Wanpeng Li [Thu, 21 Aug 2014 11:46:49 +0000 (19:46 +0800)]
KVM: nVMX: introduce nested_get_vmcs12_pages

Introduce function nested_get_vmcs12_pages() to check the valid
of nested apic access page and virtual apic page earlier.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: Unconditionally export KVM_CAP_USER_NMI
Christoffer Dall [Tue, 26 Aug 2014 12:00:38 +0000 (14:00 +0200)]
KVM: Unconditionally export KVM_CAP_USER_NMI

The idea between capabilities and the KVM_CHECK_EXTENSION ioctl is that
userspace can, at run-time, determine if a feature is supported or not.
This allows KVM to being supporting a new feature with a new kernel
version without any need to update user space.  Unfortunately, since the
definition of KVM_CAP_USER_NMI was guarded by #ifdef
__KVM_HAVE_USER_NMI, such discovery still required a user space update.

Therefore, unconditionally export KVM_CAP_USER_NMI and change the
the typo in the comment for the IOCTL number definition as well.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: Unconditionally export KVM_CAP_READONLY_MEM
Christoffer Dall [Tue, 26 Aug 2014 12:00:37 +0000 (14:00 +0200)]
KVM: Unconditionally export KVM_CAP_READONLY_MEM

The idea between capabilities and the KVM_CHECK_EXTENSION ioctl is that
userspace can, at run-time, determine if a feature is supported or not.
This allows KVM to being supporting a new feature with a new kernel
version without any need to update user space.  Unfortunately, since the
definition of KVM_CAP_READONLY_MEM was guarded by #ifdef
__KVM_HAVE_READONLY_MEM, such discovery still required a user space
update.

Therefore, unconditionally export KVM_CAP_READONLY_MEM and change the
in-kernel conditional to rely on __KVM_HAVE_READONLY_MEM.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: s390/mm: fix up indentation of set_guest_storage_key
Christian Borntraeger [Wed, 27 Aug 2014 10:20:02 +0000 (12:20 +0200)]
KVM: s390/mm: fix up indentation of set_guest_storage_key

commit ab3f285f227f ("KVM: s390/mm: try a cow on read only pages for
key ops")' misaligned a code block. Let's fixup the indentation.

Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoMerge tag 'kvm-s390-next-20140825' of git://git.kernel.org/pub/scm/linux/kernel/git...
Paolo Bonzini [Tue, 26 Aug 2014 12:31:44 +0000 (14:31 +0200)]
Merge tag 'kvm-s390-next-20140825' of git://git./linux/kernel/git/kvms390/linux into HEAD

KVM: s390: Fixes and features for 3.18 part 1

1. The usual cleanups: get rid of duplicate code, use defines, factor
   out the sync_reg handling, additional docs for sync_regs, better
   error handling on interrupt injection
2. We use KVM_REQ_TLB_FLUSH instead of open coding tlb flushes
3. Additional registers for kvm_run sync regs. This is usually not
   needed in the fast path due to eventfd/irqfd, but kvm stat claims
   that we reduced the overhead of console output by ~50% on my system
4. A rework of the gmap infrastructure. This is the 2nd step towards
   host large page support (after getting rid of the storage key
   dependency). We introduces two radix trees to store the guest-to-host
   and host-to-guest translations. This gets us rid of most of
   the page-table walks in the gmap code. Only one in __gmap_link is left,
   this one is required to link the shadow page table to the process page
   table. Finally this contains the plumbing to support gmap page tables
   with less than 5 levels.

6 years agoKVM: s390/mm: remove outdated gmap data structures
Martin Schwidefsky [Fri, 1 Aug 2014 13:03:33 +0000 (15:03 +0200)]
KVM: s390/mm: remove outdated gmap data structures

The radix tree rework removed all code that uses the gmap_rmap
and gmap_pgtable data structures. Remove these outdated definitions.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390/mm: support gmap page tables with less than 5 levels
Martin Schwidefsky [Tue, 1 Jul 2014 12:36:04 +0000 (14:36 +0200)]
KVM: s390/mm: support gmap page tables with less than 5 levels

Add an addressing limit to the gmap address spaces and only allocate
the page table levels that are needed for the given limit. The limit
is fixed and can not be changed after a gmap has been created.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390/mm: use radix trees for guest to host mappings
Martin Schwidefsky [Wed, 30 Apr 2014 14:04:25 +0000 (16:04 +0200)]
KVM: s390/mm: use radix trees for guest to host mappings

Store the target address for the gmap segments in a radix tree
instead of using invalid segment table entries. gmap_translate
becomes a simple radix_tree_lookup, gmap_fault is split into the
address translation with gmap_translate and the part that does
the linking of the gmap shadow page table with the process page
table.
A second radix tree is used to keep the pointers to the segment
table entries for segments that are mapped in the guest address
space. On unmap of a segment the pointer is retrieved from the
radix tree and is used to carry out the segment invalidation in
the gmap shadow page table. As the radix tree can only store one
pointer, each host segment may only be mapped to exactly one
guest location.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agokvm: x86: fix tracing for 32-bit
Paolo Bonzini [Mon, 25 Aug 2014 14:08:21 +0000 (16:08 +0200)]
kvm: x86: fix tracing for 32-bit

Fix commit 7b46268d29543e313e731606d845e65c17f232e4, which mistakenly
included the new tracepoint under #ifdef CONFIG_X86_64.

Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoMerge tag 'kvm-s390-20140825' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms39...
Paolo Bonzini [Mon, 25 Aug 2014 13:37:00 +0000 (15:37 +0200)]
Merge tag 'kvm-s390-20140825' of git://git./linux/kernel/git/kvms390/linux into HEAD

Here are two fixes for s390 KVM code that prevent:
1. a malicious user to trigger a kernel BUG
2. a malicious user to change the storage key of read-only pages

6 years agoKVM: s390/mm: cleanup gmap function arguments, variable names
Martin Schwidefsky [Tue, 29 Apr 2014 07:34:41 +0000 (09:34 +0200)]
KVM: s390/mm: cleanup gmap function arguments, variable names

Make the order of arguments for the gmap calls more consistent,
if the gmap pointer is passed it is always the first argument.
In addition distinguish between guest address and user address
by naming the variables gaddr for a guest address and vmaddr for
a user address.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390/mm: readd address parameter to gmap_do_ipte_notify
Martin Schwidefsky [Wed, 30 Apr 2014 12:46:26 +0000 (14:46 +0200)]
KVM: s390/mm: readd address parameter to gmap_do_ipte_notify

Revert git commit c3a23b9874c1 ("remove unnecessary parameter from
gmap_do_ipte_notify").

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390/mm: readd address parameter to pgste_ipte_notify
Martin Schwidefsky [Wed, 30 Apr 2014 12:44:44 +0000 (14:44 +0200)]
KVM: s390/mm: readd address parameter to pgste_ipte_notify

Revert git commit 1b7fd6952063 ("remove unecessary parameter from
pgste_ipte_notify")

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390: don't use kvm lock in interrupt injection code
Jens Freimann [Mon, 11 Aug 2014 13:39:43 +0000 (15:39 +0200)]
KVM: s390: don't use kvm lock in interrupt injection code

The kvm lock protects us against vcpus going away, but they only go
away when the virtual machine is shut down. We don't need this
mutex here, so let's get rid of it.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390: return -EFAULT if lowcore is not mapped during irq delivery
Jens Freimann [Thu, 17 Apr 2014 08:10:30 +0000 (10:10 +0200)]
KVM: s390: return -EFAULT if lowcore is not mapped during irq delivery

Currently we just kill the userspace process and exit the thread
immediatly without making sure that we don't hold any locks etc.

Improve this by making KVM_RUN return -EFAULT if the lowcore is not
mapped during interrupt delivery. To achieve this we need to pass
the return code of guest memory access routines used in interrupt
delivery all the way back to the KVM_RUN ioctl.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390: implement KVM_REQ_TLB_FLUSH and make use of it
David Hildenbrand [Tue, 29 Jul 2014 06:53:36 +0000 (08:53 +0200)]
KVM: s390: implement KVM_REQ_TLB_FLUSH and make use of it

Use the KVM_REQ_TLB_FLUSH request in order to trigger tlb flushes instead
of manipulating the SIE control block whenever we need it. Also trigger it for
a control register sync directly instead of (ab)using kvm_s390_set_prefix().

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390: synchronize more registers with kvm_run
David Hildenbrand [Thu, 17 Jul 2014 08:47:43 +0000 (10:47 +0200)]
KVM: s390: synchronize more registers with kvm_run

In order to reduce the number of syscalls when dropping to user space, this
patch enables the synchronization of the following "registers" with kvm_run:
- ARCH0: CPU timer, clock comparator, TOD programmable register,
         guest breaking-event register, program parameter
- PFAULT: pfault parameters (token, select, compare)

The registers are grouped to reduce the overhead when syncing.

As this grows the number of sync registers quite a bit, let's move the code
synchronizing registers with kvm_run from kvm_arch_vcpu_ioctl_run() into
separate helper routines.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390: no special machine check delivery
Christian Borntraeger [Mon, 4 Aug 2014 14:54:22 +0000 (16:54 +0200)]
KVM: s390: no special machine check delivery

The load PSW handler does not have to inject pending machine checks.
This can wait until the CPU runs the generic interrupt injection code.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
6 years agoKVM: s390: clear kvm_dirty_regs when dropping to user space
David Hildenbrand [Tue, 29 Jul 2014 06:22:33 +0000 (08:22 +0200)]
KVM: s390: clear kvm_dirty_regs when dropping to user space

We should make sure that all kvm_dirty_regs bits are cleared before dropping
to user space. Until now, some would remain pending.

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: clarify the idea of kvm_dirty_regs
David Hildenbrand [Tue, 29 Jul 2014 06:19:26 +0000 (08:19 +0200)]
KVM: clarify the idea of kvm_dirty_regs

This patch clarifies that kvm_dirty_regs are just a hint to the kernel and
that the kernel might just ignore some flags and sync the values (like done for
acrs and gprs now).

Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390: factor out get_ilc() function
Jens Freimann [Wed, 23 Jul 2014 14:36:06 +0000 (16:36 +0200)]
KVM: s390: factor out get_ilc() function

Let's make this a reusable function.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390/mm: try a cow on read only pages for key ops
Christian Borntraeger [Tue, 19 Aug 2014 14:19:35 +0000 (16:19 +0200)]
KVM: s390/mm: try a cow on read only pages for key ops

The PFMF instruction handler  blindly wrote the storage key even if
the page was mapped R/O in the host. Lets try a COW before continuing
and bail out in case of errors.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
6 years agoKVM: s390: add defines for pfault init delivery code
Jens Freimann [Wed, 16 Apr 2014 11:57:18 +0000 (13:57 +0200)]
KVM: s390: add defines for pfault init delivery code

Get rid of open coded values for pfault init.

Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
6 years agoKVM: s390: Fix user triggerable bug in dead code
Christian Borntraeger [Wed, 6 Aug 2014 14:17:58 +0000 (16:17 +0200)]
KVM: s390: Fix user triggerable bug in dead code

In the early days, we had some special handling for the
KVM_EXIT_S390_SIEIC exit, but this was gone in 2009 with commit
d7b0b5eb3000 (KVM: s390: Make psw available on all exits, not
just a subset).

Now this switch statement is just a sanity check for userspace
not messing with the kvm_run structure. Unfortunately, this
allows userspace to trigger a kernel BUG. Let's just remove
this switch statement.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
6 years agoKVM: trace kvm_ple_window grow/shrink
Radim Krčmář [Thu, 21 Aug 2014 16:08:09 +0000 (18:08 +0200)]
KVM: trace kvm_ple_window grow/shrink

Tracepoint for dynamic PLE window, fired on every potential change.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: VMX: dynamise PLE window
Radim Krčmář [Thu, 21 Aug 2014 16:08:08 +0000 (18:08 +0200)]
KVM: VMX: dynamise PLE window

Window is increased on every PLE exit and decreased on every sched_in.
The idea is that we don't want to PLE exit if there is no preemption
going on.
We do this with sched_in() because it does not hold rq lock.

There are two new kernel parameters for changing the window:
 ple_window_grow and ple_window_shrink
ple_window_grow affects the window on PLE exit and ple_window_shrink
does it on sched_in;  depending on their value, the window is modifier
like this: (ple_window is kvm_intel's global)

  ple_window_shrink/ |
  ple_window_grow    | PLE exit           | sched_in
  -------------------+--------------------+---------------------
  < 1                |  = ple_window      |  = ple_window
  < ple_window       | *= ple_window_grow | /= ple_window_shrink
  otherwise          | += ple_window_grow | -= ple_window_shrink

A third new parameter, ple_window_max, controls the maximal ple_window;
it is internally rounded down to a closest multiple of ple_window_grow.

VCPU's PLE window is never allowed below ple_window.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: VMX: make PLE window per-VCPU
Radim Krčmář [Thu, 21 Aug 2014 16:08:07 +0000 (18:08 +0200)]
KVM: VMX: make PLE window per-VCPU

Change PLE window into per-VCPU variable, seeded from module parameter,
to allow greater flexibility.

Brings in a small overhead on every vmentry.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: introduce sched_in to kvm_x86_ops
Radim Krčmář [Thu, 21 Aug 2014 16:08:06 +0000 (18:08 +0200)]
KVM: x86: introduce sched_in to kvm_x86_ops

sched_in preempt notifier is available for x86, allow its use in
specific virtualization technlogies as well.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: add kvm_arch_sched_in
Radim Krčmář [Thu, 21 Aug 2014 16:08:05 +0000 (18:08 +0200)]
KVM: add kvm_arch_sched_in

Introduce preempt notifiers for architecture specific code.
Advantage over creating a new notifier in every arch is slightly simpler
code and guaranteed call order with respect to kvm_sched_in.

Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: Replace X86_FEATURE_NX offset with the definition
Nadav Amit [Wed, 20 Aug 2014 13:38:19 +0000 (16:38 +0300)]
KVM: x86: Replace X86_FEATURE_NX offset with the definition

Replace reference to X86_FEATURE_NX using bit shift with the defined
X86_FEATURE_NX.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: avoid unnecessary synchronize_rcu
Christian Borntraeger [Tue, 19 Aug 2014 14:45:56 +0000 (16:45 +0200)]
KVM: avoid unnecessary synchronize_rcu

We dont have to wait for a grace period if there is no oldpid that
we are going to free. putpid also checks for NULL, so this patch
only fences synchronize_rcu.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: emulate: warn on invalid or uninitialized exception numbers
Paolo Bonzini [Wed, 20 Aug 2014 08:08:23 +0000 (10:08 +0200)]
KVM: emulate: warn on invalid or uninitialized exception numbers

These were reported when running Jailhouse on AMD processors.

Initialize ctxt->exception.vector with an invalid exception number,
and warn if it remained invalid even though the emulator got
an X86EMUL_PROPAGATE_FAULT return code.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: emulate: do not return X86EMUL_PROPAGATE_FAULT explicitly
Paolo Bonzini [Wed, 20 Aug 2014 08:05:08 +0000 (10:05 +0200)]
KVM: emulate: do not return X86EMUL_PROPAGATE_FAULT explicitly

Always get it through emulate_exception or emulate_ts.  This
ensures that the ctxt->exception fields have been populated.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: Clarify PMU related features bit manipulation
Nadav Amit [Wed, 20 Aug 2014 10:25:52 +0000 (13:25 +0300)]
KVM: x86: Clarify PMU related features bit manipulation

kvm_pmu_cpuid_update makes a lot of bit manuiplation operations, when in fact
there are already unions that can be used instead. Changing the bit
manipulation to the union for clarity. This patch does not change the
functionality.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: vmx: fix ept reserved bits for 1-GByte page
Wanpeng Li [Wed, 20 Aug 2014 07:31:53 +0000 (15:31 +0800)]
KVM: vmx: fix ept reserved bits for 1-GByte page

EPT misconfig handler in kvm will check which reason lead to EPT
misconfiguration after vmexit. One of the reasons is that an EPT
paging-structure entry is configured with settings reserved for
future functionality. However, the handler can't identify if
paging-structure entry of reserved bits for 1-GByte page are
configured, since PDPTE which point to 1-GByte page will reserve
bits 29:12 instead of bits 7:3 which are reserved for PDPTE that
references an EPT Page Directory. This patch fix it by reserve
bits 29:12 for 1-GByte page.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: recalculate_apic_map after enabling apic
Nadav Amit [Mon, 18 Aug 2014 21:03:00 +0000 (00:03 +0300)]
KVM: x86: recalculate_apic_map after enabling apic

Currently, recalculate_apic_map ignores vcpus whose lapic is software disabled
through the spurious interrupt vector. However, once it is re-enabled, the map
is not recalculated. Therefore, if the guest OS configured DFR while lapic is
software-disabled, the map may be incorrect. This patch recalculates apic map
after software enabling the lapic.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: Clear apic tsc-deadline after deadline
Nadav Amit [Mon, 18 Aug 2014 19:42:13 +0000 (22:42 +0300)]
KVM: x86: Clear apic tsc-deadline after deadline

Intel SDM 10.5.4.1 says "When the timer generates an interrupt, it disarms
itself and clears the IA32_TSC_DEADLINE MSR".

This patch clears the MSR upon timer interrupt delivery which delivered on
deadline mode.  Since the MSR may be reconfigured while an interrupt is
pending, causing the new value to be overriden, pending timer interrupts are
checked before setting a new deadline.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: #GP when attempts to write reserved bits of Variable Range MTRRs
Wanpeng Li [Tue, 19 Aug 2014 09:04:40 +0000 (17:04 +0800)]
KVM: x86: #GP when attempts to write reserved bits of Variable Range MTRRs

Section 11.11.2.3 of the SDM mentions "All other bits in the IA32_MTRR_PHYSBASEn
and IA32_MTRR_PHYSMASKn registers are reserved; the processor generates a
general-protection exception(#GP) if software attempts to write to them". This
patch do it in kvm.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: fix check legal type of Variable Range MTRRs
Wanpeng Li [Tue, 19 Aug 2014 09:04:39 +0000 (17:04 +0800)]
KVM: x86: fix check legal type of Variable Range MTRRs

The first entry in each pair(IA32_MTRR_PHYSBASEn) defines the base
address and memory type for the range; the second entry(IA32_MTRR_PHYSMASKn)
contains a mask used to determine the address range. The legal values
for the type field of IA32_MTRR_PHYSBASEn are 0,1,4,5, and 6. However,
IA32_MTRR_PHYSMASKn don't have type field. This patch avoid check if
the type field is legal for IA32_MTRR_PHYSMASKn.

Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoarch/x86: Use RCU_INIT_POINTER(x, NULL) in kvm/vmx.c
Monam Agarwal [Sat, 22 Mar 2014 06:58:10 +0000 (12:28 +0530)]
arch/x86: Use RCU_INIT_POINTER(x, NULL) in kvm/vmx.c

Here rcu_assign_pointer() is ensuring that the
initialization of a structure is carried out before storing a pointer
to that structure.
So, rcu_assign_pointer(p, NULL) can always safely be converted to
RCU_INIT_POINTER(p, NULL).

Signed-off-by: Monam Agarwal <monamagarwal123@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: raise invalid TSS exceptions during a task switch
Paolo Bonzini [Mon, 18 Aug 2014 11:17:00 +0000 (13:17 +0200)]
KVM: x86: raise invalid TSS exceptions during a task switch

Conditions that would usually trigger a general protection fault should
instead raise #TS.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: drop fpu_activate hook
Wanpeng Li [Mon, 18 Aug 2014 09:50:28 +0000 (17:50 +0800)]
KVM: x86: drop fpu_activate hook

The only user of the fpu_activate hook was dropped in commit
2d04a05bd7e9 (KVM: x86 emulator: emulate CLTS internally, 2011-04-20).
vmx_fpu_activate and svm_fpu_activate are still called on #NM (and for
Intel CLTS), but never from common code; hence, there's no need for
a hook.

Reviewed-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: SVM: add rdmsr support for AMD event registers
Wei Huang [Wed, 13 Aug 2014 16:06:14 +0000 (12:06 -0400)]
KVM: SVM: add rdmsr support for AMD event registers

Current KVM only supports RDMSR for K7_EVNTSEL0 and K7_PERFCTR0
MSRs. Reading the rest MSRs will trigger KVM to inject #GP into
guest VM. This causes a warning message "Failed to access perfctr
msr (MSR c0010001 is ffffffffffffffff)" on AMD host. This patch
adds RDMSR support for all K7_EVNTSELn and K7_PERFCTRn registers
and thus supresses the warning message.

Signed-off-by: Wei Huang <wehuang@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agovirt/kvm/assigned-dev.c: Set 'dev->irq_source_id' to '-1' after free it
Chen Gang [Fri, 8 Aug 2014 15:37:59 +0000 (23:37 +0800)]
virt/kvm/assigned-dev.c: Set 'dev->irq_source_id' to '-1' after free it

As a generic function, deassign_guest_irq() assumes it can be called
even if assign_guest_irq() is not be called successfully (which can be
triggered by ioctl from user mode, indirectly).

So for assign_guest_irq() failure process, need set 'dev->irq_source_id'
to -1 after free 'dev->irq_source_id', or deassign_guest_irq() may free
it again.

Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoRevert "KVM: x86: Increase the number of fixed MTRR regs to 10"
Paolo Bonzini [Mon, 18 Aug 2014 14:39:48 +0000 (16:39 +0200)]
Revert "KVM: x86: Increase the number of fixed MTRR regs to 10"

This reverts commit 682367c494869008eb89ef733f196e99415ae862,
which causes 32-bit SMP Windows 7 guests to panic.

SeaBIOS has a limit on the number of MTRRs that it can handle,
and this patch exceeded the limit.  Better revert it.
Thanks to Nadav Amit for debugging the cause.

Cc: stable@nongnu.org
Reported-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: do not check CS.DPL against RPL during task switch
Paolo Bonzini [Mon, 18 Aug 2014 11:15:51 +0000 (13:15 +0200)]
KVM: x86: do not check CS.DPL against RPL during task switch

This reverts the check added by commit 5045b468037d (KVM: x86: check CS.DPL
against RPL during task switch, 2014-05-15).  Although the CS.DPL=CS.RPL
check is mentioned in table 7-1 of the SDM as causing a #TSS exception,
it is not mentioned in table 6-6 that lists "invalid TSS conditions"
which cause #TSS exceptions. In fact it causes some tests to fail, which
pass on bare-metal.

Keep the rest of the commit, since we will find new uses for it in 3.18.

Reported-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoKVM: x86: Avoid emulating instructions on #UD mistakenly
Nadav Amit [Wed, 13 Aug 2014 13:50:13 +0000 (16:50 +0300)]
KVM: x86: Avoid emulating instructions on #UD mistakenly

Commit d40a6898e5 mistakenly caused instructions which are not marked as
EmulateOnUD to be emulated upon #UD exception. The commit caused the check of
whether the instruction flags include EmulateOnUD to never be evaluated. As a
result instructions whose emulation is broken may be emulated.  This fix moves
the evaluation of EmulateOnUD so it would be evaluated.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
[Tweak operand order in &&, remove EmulateOnUD where it's now superfluous.
 - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoPC, KVM, CMA: Fix regression caused by wrong get_order() use
Alexey Kardashevskiy [Thu, 14 Aug 2014 05:03:07 +0000 (15:03 +1000)]
PC, KVM, CMA: Fix regression caused by wrong get_order() use

fc95ca7284bc54953165cba76c3228bd2cdb9591 claims that there is no
functional change but this is not true as it calls get_order() (which
takes bytes) where it should have called order_base_2() and the kernel
stops on VM_BUG_ON().

This replaces get_order() with order_base_2() (round-up version of ilog2).

Suggested-by: Paul Mackerras <paulus@samba.org>
Cc: Alexander Graf <agraf@suse.de>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agokvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)
Michael S. Tsirkin [Tue, 19 Aug 2014 11:14:50 +0000 (19:14 +0800)]
kvm: iommu: fix the third parameter of kvm_iommu_put_pages (CVE-2014-3601)

The third parameter of kvm_iommu_put_pages is wrong,
It should be 'gfn - slot->base_gfn'.

By making gfn very large, malicious guest or userspace can cause kvm to
go to this error path, and subsequently to pass a huge value as size.
Alternatively if gfn is small, then pages would be pinned but never
unpinned, causing host memory leak and local DOS.

Passing a reasonable but large value could be the most dangerous case,
because it would unpin a page that should have stayed pinned, and thus
allow the device to DMA into arbitrary memory.  However, this cannot
happen because of the condition that can trigger the error:

- out of memory (where you can't allocate even a single page)
  should not be possible for the attacker to trigger

- when exceeding the iommu's address space, guest pages after gfn
  will also exceed the iommu's address space, and inside
  kvm_iommu_put_pages() the iommu_iova_to_phys() will fail.  The
  page thus would not be unpinned at all.

Reported-by: Jack Morgenstein <jackm@mellanox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
6 years agoLinux 3.17-rc1 v3.17-rc1
Linus Torvalds [Sat, 16 Aug 2014 16:40:26 +0000 (10:40 -0600)]
Linux 3.17-rc1

6 years agoMerge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
Linus Torvalds [Sat, 16 Aug 2014 15:32:27 +0000 (09:32 -0600)]
Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86

Pull x86 platform driver updates from Matthew Garrett:
 "A moderate number of changes, but nothing awfully significant.

  A lot of const cleanups, some reworking and additions to the rfkill
  quirks in the asus driver, a new driver for generating falling laptop
  events on Toshibas and some misc fixes.

  Maybe vendors have stopped inventing things"

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86: (41 commits)
  platform/x86: Enable build support for toshiba_haps
  Documentation: Add file about toshiba_haps module
  platform/x86: Toshiba HDD Active Protection Sensor
  asus-nb-wmi: Add wapf4 quirk for the U32U
  alienware-wmi: make hdmi_mux enabled on case-by-case basis
  ideapad-laptop: Constify DMI table and other r/o variables
  asus-nb-wmi.c: Rename x401u quirk to wapf4
  compal-laptop: correct invalid hwmon name
  toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list
  toshiba_acpi: Add extra check to backlight code
  Fix log message about future removal of interface
  ideapad-laptop: Disable touchpad interface on Yoga models
  asus-nb-wmi: Add wapf4 quirk for the X550CC
  intel_ips: Make ips_mcp_limits variables static
  thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata
  fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst
  hp-wmi: Add missing __init annotations to initialization code
  hp_accel: Constify ACPI and DMI tables
  fujitsu-tablet: Mark DMI callbacks as __init code
  dell-laptop: Mark dell_quirks[] DMI table as __initconst
  ...

6 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Linus Torvalds [Sat, 16 Aug 2014 15:25:34 +0000 (09:25 -0600)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux

Pull idle update from Len Brown:
 "Two Intel-platform-specific updates to intel_idle, and a cosmetic
  tweak to the turbostat utility"

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: tweak whitespace in output format
  intel_idle: Broadwell support
  intel_idle: Disable Baytrail Core and Module C6 auto-demotion

6 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty...
Linus Torvalds [Sat, 16 Aug 2014 15:24:41 +0000 (09:24 -0600)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/rusty/linux

Pull module fix from Rusty Russell:
 "Nasty potential bug if someone uses a known module param with an
  invalid value (we don't fail unknown module params any more, just
  warn)"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: Clean up ro/nx after early module load failures

6 years agoMerge branch 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio
Linus Torvalds [Sat, 16 Aug 2014 15:23:15 +0000 (09:23 -0600)]
Merge branch 'rng-queue' of git://git./linux/kernel/git/amit/virtio

Pull virtio-rng update from Amit Shah:
 "Add derating factor for use by hwrng core

  Sending directly to you with the commit log changes Ted Ts'o pointed
  out.  Not sure if Rusty's back after his travel, but this already has
  his s-o-b"

* 'rng-queue' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio:
  virtio: rng: add derating factor for use by hwrng core

6 years agoMerge branch 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason...
Linus Torvalds [Sat, 16 Aug 2014 15:06:55 +0000 (09:06 -0600)]
Merge branch 'for-linus2' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs updates from Chris Mason:
 "These are all fixes I'd like to get out to a broader audience.

  The biggest of the bunch is Mark's quota fix, which is also in the
  SUSE kernel, and makes our subvolume quotas dramatically more
  accurate.

  I've been running xfstests with these against your current git
  overnight, but I'm queueing up longer tests as well"

* 'for-linus2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: disable strict file flushes for renames and truncates
  Btrfs: fix csum tree corruption, duplicate and outdated checksums
  Btrfs: Fix memory corruption by ulist_add_merge() on 32bit arch
  Btrfs: fix compressed write corruption on enospc
  btrfs: correctly handle return from ulist_add
  btrfs: qgroup: account shared subtrees during snapshot delete
  Btrfs: read lock extent buffer while walking backrefs
  Btrfs: __btrfs_mod_ref should always use no_quota
  btrfs: adjust statfs calculations according to raid profiles

6 years agoMerge tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux
Linus Torvalds [Sat, 16 Aug 2014 14:58:47 +0000 (08:58 -0600)]
Merge tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux

Pull file locking bugfixes from Jeff Layton:
 "Most of these patches are to fix a long-standing regression that crept
  in when the BKL was removed from the file-locking code.  The code was
  converted to use a conventional spinlock, but some fl_release_private
  ops can block and you can end up sleeping inside the lock.

  There's also a patch to make /proc/locks show delegations as 'DELEG'"

* tag 'locks-v3.17-2' of git://git.samba.org/jlayton/linux:
  locks: update Locking documentation to clarify fl_release_private behavior
  locks: move locks_free_lock calls in do_fcntl_add_lease outside spinlock
  locks: defer freeing locks in locks_delete_lock until after i_lock has been dropped
  locks: don't reuse file_lock in __posix_lock_file
  locks: don't call locks_release_private from locks_copy_lock
  locks: show delegations as "DELEG" in /proc/locks

6 years agoMerge git://git.kvack.org/~bcrl/aio-next
Linus Torvalds [Sat, 16 Aug 2014 14:56:27 +0000 (08:56 -0600)]
Merge git://git.kvack.org/~bcrl/aio-next

Pull aio updates from Ben LaHaise.

* git://git.kvack.org/~bcrl/aio-next:
  aio: use iovec array rather than the single one
  aio: fix some comments
  aio: use the macro rather than the inline magic number
  aio: remove the needless registration of ring file's private_data
  aio: remove no longer needed preempt_disable()
  aio: kill the misleading rcu read locks in ioctx_add_table() and kill_ioctx()
  aio: change exit_aio() to load mm->ioctx_table once and avoid rcu_read_lock()

6 years agoplatform/x86: Enable build support for toshiba_haps
Azael Avalos [Thu, 14 Aug 2014 15:55:40 +0000 (09:55 -0600)]
platform/x86: Enable build support for toshiba_haps

Makefile and Kconfig build support patch for the newly introduced
kernel module toshiba_haps.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoDocumentation: Add file about toshiba_haps module
Azael Avalos [Thu, 14 Aug 2014 15:55:39 +0000 (09:55 -0600)]
Documentation: Add file about toshiba_haps module

This patch provides information about the Toshiba HDD
Active Protection Sensor driver module toshiba_haps.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoplatform/x86: Toshiba HDD Active Protection Sensor
Azael Avalos [Thu, 14 Aug 2014 15:55:38 +0000 (09:55 -0600)]
platform/x86: Toshiba HDD Active Protection Sensor

This driver adds support for the built-in accelereometer found
on recent Toshiba laptops with HID TOS620A.

This driver receives ACPI notify events 0x80 when the sensor
detects a sudden move or a harsh vibration, as well as an
ACPI notify event 0x81 whenever the movement or vibration has
been stabilized.

Also provides sysfs entries to get/set the desired protection
level and reseting the HDD protection interface.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoasus-nb-wmi: Add wapf4 quirk for the U32U
Hans de Goede [Tue, 29 Jul 2014 09:59:57 +0000 (11:59 +0200)]
asus-nb-wmi: Add wapf4 quirk for the U32U

As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681
the U32U needs wapf=4 too.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoalienware-wmi: make hdmi_mux enabled on case-by-case basis
Mario Limonciello [Thu, 24 Jul 2014 04:19:23 +0000 (23:19 -0500)]
alienware-wmi: make hdmi_mux enabled on case-by-case basis

Not all HW supporting WMAX method will support the HDMI mux feature.
Explicitly quirk the HW that does support it.

Signed-off-by: Mario Limonciello <mario_limonciello@dell.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoideapad-laptop: Constify DMI table and other r/o variables
Mathias Krause [Wed, 16 Jul 2014 17:43:15 +0000 (19:43 +0200)]
ideapad-laptop: Constify DMI table and other r/o variables

Constify the rfkill_blacklist[] DMI table, the ideapad_rfk_data[] table
and the ideapad_attribute_group attribute group. There's no need to have
them writeable during runtime.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoasus-nb-wmi.c: Rename x401u quirk to wapf4
Hans de Goede [Mon, 14 Jul 2014 07:14:34 +0000 (09:14 +0200)]
asus-nb-wmi.c: Rename x401u quirk to wapf4

The actual x401u does not use the so named x401u quirk but the x55u quirk.
All that the x401u quirk does it setting wapf to 4, so rename it to wapf4 to
stop the confusion.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agocompal-laptop: correct invalid hwmon name
Roald Frederickx [Wed, 13 Aug 2014 20:40:14 +0000 (13:40 -0700)]
compal-laptop: correct invalid hwmon name

Change the name of the hwmon interface from "compal-laptop" to "compal".
A dash is an invalid character for a hwmon name and caused the call to
hwmon_device_register_with_groups() to fail.

Signed-off-by: Roald Frederickx <roald.frederickx@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agotoshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list
Azael Avalos [Mon, 4 Aug 2014 15:21:02 +0000 (09:21 -0600)]
toshiba_acpi: Add Qosmio X75-A to the alt keymap dmi list

The Toshiba Qosmio X75-A series models also come with
the new keymap layout.

This patch adds this model to the alt_keymap_dmi list,
along with an extra key found on these models.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agotoshiba_acpi: Add extra check to backlight code
Azael Avalos [Mon, 4 Aug 2014 15:21:01 +0000 (09:21 -0600)]
toshiba_acpi: Add extra check to backlight code

Some Toshiba models (most notably Qosmios) come with an
incomplete backlight method where the AML code doesn't
check for write or read commands and always returns
HCI_SUCCESS and the actual brightness (and in some
cases the max brightness), thus allowing the backlight
interface to be registered without write support.

This patch changes the set_lcd_brightness function,
checking the returned values for values greater than
zero to avoid registering a broken backlight interface.

Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoFix log message about future removal of interface
Martin Kepplinger [Sat, 26 Jul 2014 15:46:06 +0000 (17:46 +0200)]
Fix log message about future removal of interface

If this is going away, it won't be in 2012.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoideapad-laptop: Disable touchpad interface on Yoga models
Hans de Goede [Fri, 18 Jul 2014 10:21:47 +0000 (12:21 +0200)]
ideapad-laptop: Disable touchpad interface on Yoga models

Yoga models don't offer touchpad ctrl through the ideapad interface, causing
ideapad_sync_touchpad_state to send wrong touchpad enable/disable events.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoasus-nb-wmi: Add wapf4 quirk for the X550CC
Hans de Goede [Fri, 18 Jul 2014 10:15:09 +0000 (12:15 +0200)]
asus-nb-wmi: Add wapf4 quirk for the X550CC

As reported here: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1173681
the X550CC needs wapf=4 too.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agointel_ips: Make ips_mcp_limits variables static
Mathias Krause [Wed, 16 Jul 2014 17:43:16 +0000 (19:43 +0200)]
intel_ips: Make ips_mcp_limits variables static

These variables don't need to be visible outside of this compilation
unit, make them static.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agothinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata
Mathias Krause [Wed, 16 Jul 2014 17:43:17 +0000 (19:43 +0200)]
thinkpad_acpi: Mark volume_alsa_control_{vol,mute} as __initdata

Mark volume_alsa_control_vol and volume_alsa_control_mute as __initdata,
as snd_ctl_new1() will copy the relevant parts, so there is no need to
keep the master copies around after initialization.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agofujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst
Mathias Krause [Wed, 16 Jul 2014 17:43:11 +0000 (19:43 +0200)]
fujitsu-laptop: Mark fujitsu_dmi_table[] DMI table as __initconst

The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released afterwards -- roughly 1.5 kB.
In turn, the callback functions can be marked with __init, too.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agohp-wmi: Add missing __init annotations to initialization code
Mathias Krause [Wed, 16 Jul 2014 17:43:13 +0000 (19:43 +0200)]
hp-wmi: Add missing __init annotations to initialization code

These functions are only called from other initialization routines, so
can be marked __init, too.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agohp_accel: Constify ACPI and DMI tables
Mathias Krause [Wed, 16 Jul 2014 17:43:14 +0000 (19:43 +0200)]
hp_accel: Constify ACPI and DMI tables

Constify the lis3lv02d_device_ids[] ACPI and the lis3lv02d_dmi_ids[] DMI
tables. There's no need to have them writeable during runtime.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agofujitsu-tablet: Mark DMI callbacks as __init code
Mathias Krause [Wed, 16 Jul 2014 17:43:12 +0000 (19:43 +0200)]
fujitsu-tablet: Mark DMI callbacks as __init code

The DMI table is already marked as __initconst, so can be the callback
functions as they're only used in that context.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Robert Gerlach <khnz@gmx.de>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agodell-laptop: Mark dell_quirks[] DMI table as __initconst
Mathias Krause [Wed, 16 Jul 2014 17:43:09 +0000 (19:43 +0200)]
dell-laptop: Mark dell_quirks[] DMI table as __initconst

The dell_quirks[] DMI table is only ever used during initialization.
Mark it as __initconst so its memory can be released afterwards --
roughly 5.7 kB. In turn, the callback function can be marked with
__init, too.

Also the touchpad_led_init() function can be marked __init as it's only
referenced from dell_init() -- an __init function.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoeeepc-wmi: Constify asus_quirks[] DMI table
Mathias Krause [Wed, 16 Jul 2014 17:43:10 +0000 (19:43 +0200)]
eeepc-wmi: Constify asus_quirks[] DMI table

Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoacer-wmi: Mark init data and code as such
Mathias Krause [Wed, 16 Jul 2014 17:43:04 +0000 (19:43 +0200)]
acer-wmi: Mark init data and code as such

Quite a lot of code and data of acer-wmi.c is only ever used during
initialization. Mark those accordingly -- and constify, where
appropriate -- so the memory can be released afterwards.

All in all those changes move ~10 kB of code and data to the .init
sections, marking them for release after initialization has finished.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoasus-nb-wmi: Constify asus_quirks[] DMI table
Mathias Krause [Wed, 16 Jul 2014 17:43:08 +0000 (19:43 +0200)]
asus-nb-wmi: Constify asus_quirks[] DMI table

Constify the asus_quirks[] DMI table. There's no need to have it
writeable during runtime.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Corentin Chary <corentin.chary@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoalienware-wmi: Mark DMI table as __initconst
Mathias Krause [Wed, 16 Jul 2014 17:43:07 +0000 (19:43 +0200)]
alienware-wmi: Mark DMI table as __initconst

The DMI table is only ever used during initialization. Mark it as
__initconst so its memory can be released appropriately. In turn, the
callback function can be marked with __init, too.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoacer-wmi: Hide acer_{suspend,resume} for !CONFIG_PM_SLEEP
Mathias Krause [Wed, 16 Jul 2014 17:43:06 +0000 (19:43 +0200)]
acer-wmi: Hide acer_{suspend,resume} for !CONFIG_PM_SLEEP

Encapsulate acer_suspend() and acer_resume with #ifdef CONFIG_PM_SLEEP
to get rid of the following warnings:

  ../acer-wmi.c:2046:12: warning: ‘acer_suspend’ defined but not used [-Wunused-function]
  ../acer-wmi.c:2068:12: warning: ‘acer_resume’ defined but not used [-Wunused-function]

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoacer-wmi: Mark acer_wmi_keymap[] as __initconst
Mathias Krause [Wed, 16 Jul 2014 17:43:05 +0000 (19:43 +0200)]
acer-wmi: Mark acer_wmi_keymap[] as __initconst

sparse_keymap_setup() will make a copy of the keymap, so we can release
the master copy after initialization.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: "Lee, Chun-Yi" <jlee@suse.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoMAINTAINERS: Update git URL for x86 platform drivers
Mathias Krause [Wed, 16 Jul 2014 17:43:03 +0000 (19:43 +0200)]
MAINTAINERS: Update git URL for x86 platform drivers

The repo on kernel.org is no longer available but has a replacement at
cavan.codon.org.uk.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoWMI: Remove unnecessary null test
Himangi Saraogi [Tue, 15 Jul 2014 17:19:11 +0000 (22:49 +0530)]
WMI: Remove unnecessary null test

This patch removes the null test on block. block is initialized at the
beginning of the function to &wblock->gblock. Since wblock is
dereferenced prior to the null test, wblock must be a valid pointer,
and &wblock->gblock cannot be null.

The following Coccinelle script is used for detecting the change:

@r@
expression e,f;
identifier g,y;
statement S1,S2;
@@

*e = &f->g
<+...
 f->y
 ...+>
*if (e != NULL || ...)
 S1 else S2

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agodrivers/platform/x86/thinkpad_acpi.c: don't test unsigned int for negativity
Andrey Utkin [Mon, 14 Jul 2014 22:56:21 +0000 (01:56 +0300)]
drivers/platform/x86/thinkpad_acpi.c: don't test unsigned int for negativity

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=80231
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoasus-nb-wmi: Add wapf4 quirk for the X550CL
Hans de Goede [Mon, 14 Jul 2014 07:14:35 +0000 (09:14 +0200)]
asus-nb-wmi: Add wapf4 quirk for the X550CL

As reported here: https://bugs.launchpad.net/bugs/1277959
the X550CL needs wapf=4 too.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoasus-nb-wmi: Add ASUSTeK COMPUTER INC. X200CA
AceLan Kao [Wed, 9 Jul 2014 08:18:19 +0000 (16:18 +0800)]
asus-nb-wmi: Add ASUSTeK COMPUTER INC. X200CA

BIOS won't light on the wifi-led after S3, so asus-wmi driver needs to
control the wifi and wifi-led status.
But, it'll lead to bt status error if asus-wmi driver controls bt as well.
So, for X200CA, asus-wmi driver controls wifi status only and have to set
wapf to 1.

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoasus-wmi: control wlan-led if wapf > 0
AceLan Kao [Wed, 9 Jul 2014 08:18:18 +0000 (16:18 +0800)]
asus-wmi: control wlan-led if wapf > 0

Wifi will be controlled by asus-wmi driver when wapf > 0
So, controls the wifi-led when wapf > 0

Signed-off-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoasus-wmi: backlight_init: Stop treating -ENODEV as if its not an error
Hans de Goede [Tue, 8 Jul 2014 08:47:22 +0000 (10:47 +0200)]
asus-wmi: backlight_init: Stop treating -ENODEV as if its not an error

When bl_power support got added to asus-wmi, the error handling for it was
written to ignore -ENODEV, to avoid not registering a backlight interface for
models which have no bl_power control, but do have brightness control.

At the same time the error handling for brightness_max was modified to do the
same, this is wrong, when there is no brightness_max asus-wmi should not
register a backlight interface.

Note the caller of asus_wmi_backlight_init already special cases -ENODEV,
and will not cause the wmi driver regristration to fail because of a
-ENODEV return from asus_wmi_backlight_init.

https://bugzilla.redhat.com/show_bug.cgi?id=1097436

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoasus-wmi: Disable acpi-video backlight on desktop machines
Hans de Goede [Tue, 8 Jul 2014 08:47:21 +0000 (10:47 +0200)]
asus-wmi: Disable acpi-video backlight on desktop machines

Some Asus motherboards for desktop PC-s export an acpi-video interface
advertising backlight support. Test the dmi chassis-type and tell acpi-video
to not register a backlight interface on desktops.

https://bugzilla.redhat.com/show_bug.cgi?id=1097436

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoideapad-laptop: Change Lenovo Yoga 2 series rfkill handling
Hans de Goede [Mon, 23 Jun 2014 14:45:51 +0000 (16:45 +0200)]
ideapad-laptop: Change Lenovo Yoga 2 series rfkill handling

It seems that the same problems which lead to adding an rfkill blacklist and
putting the Lenovo Yoga 2 11 on it are also present on the Lenovo Yoga 2 13
and Lenovo Yoga 2 Pro too:
https://bugzilla.redhat.com/show_bug.cgi?id=1021036
https://forums.lenovo.com/t5/Linux-Discussion/Yoga-2-13-not-Pro-Linux-Warning/m-p/1517612

Testing has shown that the firmware rfkill settings are persistent over
reboots. So blacklisting the driver is not good enough, if the wifi is blocked
at the firmware level the wifi needs to be explictly unblocked through the
ideapad-laptop interface.

And at least on the Lenovo Yoga 2 13 the VPCCMD_RF register which on devices
with hardware kill switch reports the hardware switch state, needs to be
explictly set to 1 (radio enabled / not blocked).

So this patch does 3 things to get proper rfkill handling on these models:

1) Instead of blacklisting the rfkill functionality, which means that people
with a firmware blocked wifi get stuck in that situation, ignore the value
reported by the not present hardware rfkill switch, as this is what is causing
ideapad-laptop to wrongly report all radios as hardware blocks. But do register
the rfkill interfaces so that the user can soft [un]block them.

2) On models without a hardware rfkill switch, explictly set VPCCMD_RF to 1

3) Drop the " 11" postfix from the dmi match string, as the entire Yoga 2
series is affected.

Yoga 2 11:
Reported-and-tested-by: Vincent Gerris <vgerris@gmail.com>
Yoga 2 13:
Tested-by: madls05 <http://ubuntuforums.org/showthread.php?t=2215044>
Yoga 2 Pro:
Reported-and-tested-by: Peter F. Patel-Schneider <pfpschneider@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agothinkpad_acpi: Update mapping for F12 hotkey on *40 models to KEY_FILE
Hans de Goede [Mon, 23 Jun 2014 11:38:23 +0000 (13:38 +0200)]
thinkpad_acpi: Update mapping for F12 hotkey on *40 models to KEY_FILE

The new keyboard found on the *40 models is also being sold as a standalone
keyboard (with trackpoint):
http://shop.lenovo.com/us/en/itemdetails/0B47189/460/60AC6A0372B14F5BA7B12F1FF88E33C7

This uses a standard HUT code for the F12 key with the 6 square boxes on it,
which gets mapped to KEY_FILE by the kernel. Change the mapping done of
identical laptop key done by thinkpad_acpi to also send KEY_FILE for
consistency.

Cc: Jamie Lentin <jm@lentin.co.uk>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoeeepc-laptop: rename _set and _get arguments in macro
Paul Bolle [Tue, 17 Jun 2014 12:06:30 +0000 (14:06 +0200)]
eeepc-laptop: rename _set and _get arguments in macro

The _set and _get arguments to the EEEPC_CREATE_SENSOR_ATTR() macro
are confusingly named: _set should be _get and vice versa. Rename these
arguments.

Drop the trailing semicolon from that macro, while we're at it.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agofujitsu-laptop: Clear build warnings
Jean Delvare [Mon, 16 Jun 2014 09:55:13 +0000 (11:55 +0200)]
fujitsu-laptop: Clear build warnings

When CONFIG_FUJITSU_LAPTOP_DEBUG is disabled and W=1, the
fujitsu-laptop driver builds with the following warnings:

drivers/platform/x86/fujitsu-laptop.c: In function "bl_update_status":
drivers/platform/x86/fujitsu-laptop.c:409:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body]
    ret);
        ^
drivers/platform/x86/fujitsu-laptop.c:418:8: warning: suggest braces around empty body in an "if" statement [-Wempty-body]
    ret);
        ^

Rework the debug printk helper macro to get rid of these. I verified
that this change has no effect on the generated binary, both in the
debug and non-debug case.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agoplatform/x86/toshiba-apci.c possible bad if test?
Nick [Fri, 13 Jun 2014 03:04:15 +0000 (23:04 -0400)]
platform/x86/toshiba-apci.c possible bad if test?

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
6 years agosony-laptop: fix doesn't work lid resume settings on Vaio Pro
mog422 [Thu, 12 Jun 2014 06:34:09 +0000 (15:34 +0900)]
sony-laptop: fix doesn't work lid resume settings on Vaio Pro

Signed-off-by: mog422 <admin@mog422.net>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>