sfrench/cifs-2.6.git
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Mon, 22 Jan 2007 17:23:23 +0000 (09:23 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  hid-core.c: Adds GTCO CalComp Interwrite IPanel PIDs to blacklist
  HID: put usb_interface instead of usb_device into hid->dev to fix udevinfo breakage
  HID: add missing RX, RZ and RY enum values to hid-debug output
  HID: hid/hid-input.c doesn't need to include linux/usb/input.h
  HID: compilation fix when DEBUG_DATA is defined
  HID: proper LED-mapping for SpaceNavigator
  HID: update MAINTAINERS entry for USB-HID
  HID: GEYSER4_ISO needs quirk
  HID: fix some ARM builds due to HID brokenness - make USB_HID depend on INPUT

14 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Mon, 22 Jan 2007 17:21:02 +0000 (09:21 -0800)]
Merge branch 'merge' of git://git./linux/kernel/git/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] Update defconfigs
  [POWERPC] atomic_dec_if_positive sign extension fix
  [POWERPC] Fix OF node refcnt underflow in 836x and 832x platform code
  [POWERPC] Make it blatantly clear; mpc5200 device tree is not yet stable
  [POWERPC] Fix broken DMA on non-LPAR pSeries
  [POWERPC] Fix cell's mmio nvram to properly parse device tree
  [POWERPC] Remove bogus sanity check in pci -> OF node code

14 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Mon, 22 Jan 2007 17:07:00 +0000 (09:07 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Delete duplicate call to load_irq_save.
  [MIPS] SMTC: Fix cp0 hazard.

14 years agoMerge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Mon, 22 Jan 2007 16:57:03 +0000 (08:57 -0800)]
Merge branch 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'hwmon-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  hwmon/w83793: Hide invalid VID readings
  hwmon/w83793: Fix the fan input detection
  hwmon/w83793: Ignore disabled temperature channels
  hwmon: Fix the VRD 11 decoding
  hwmon/w83793: Remove the description of AMDSI and update the voltage formula

14 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6
Linus Torvalds [Mon, 22 Jan 2007 16:55:56 +0000 (08:55 -0800)]
Merge git://git./linux/kernel/git/aia21/ntfs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6:
  NTFS: Forgot to bump version number in makefile to 2.1.28...
  NTFS: 2.1.28 - Fix deadlock reported by Sergey Vlasov due to ntfs_put_inode().

14 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Mon, 22 Jan 2007 16:55:28 +0000 (08:55 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/mchehab/v4l-dvb

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5023): Fix compilation on ppc32 architecture
  V4L/DVB (5071): Tveeprom: autodetect LG TAPC G701D as tuner type 37
  V4L/DVB (5069): Fix bttv and friends on 64bit machines with lots of memory
  V4L/DVB (5033): MSI TV@nywhere Plus fixes
  V4L/DVB (5029): Ks0127 status flags
  V4L/DVB (5024): Fix quickcam communicator driver for big endian architectures
  V4L/DVB (5021): Cx88xx: Fix lockup on suspend
  V4L/DVB (5020): Fix: disable interrupts while at KM_BOUNCE_READ
  V4L/DVB (5019): Fix the frame->grabstate update in read() entry point.

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Mon, 22 Jan 2007 16:54:48 +0000 (08:54 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: Correct definition of R6
  omap: Update MMC response types

14 years agoRevert "[PATCH] Fix up mmap_kmem"
Linus Torvalds [Mon, 22 Jan 2007 16:53:24 +0000 (08:53 -0800)]
Revert "[PATCH] Fix up mmap_kmem"

This reverts commit 99a10a60ba9bedcf5d70ef81414d3e03816afa3f.

As per Hugh Dickins:

  "Nadia Derbey has reported that mmap of /dev/kmem no longer works with
   the kernel virtual address as offset, and Franck has confirmed that
   his patch came from a misunderstanding of what an offset means to
   /dev/kmem - whereas his patch description seems to say that he was
   correcting the offset on a few plaforms, there was no such problem to
   correct, and his patch was in fact changing its API on all platforms."

Suggested-by: Hugh Dickins <hugh@veritas.com>
Cc: Franck Bui-Huu <fbuihuu@gmail.com>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: Andi Kleen <ak@suse.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
14 years ago[POWERPC] Update defconfigs
Paul Mackerras [Mon, 22 Jan 2007 11:39:24 +0000 (22:39 +1100)]
[POWERPC] Update defconfigs

Mostly took the defaults, except tried to get the netfilter options
more or less as they were before.

Signed-off-by: Paul Mackerras <paulus@samba.org>
14 years ago[POWERPC] atomic_dec_if_positive sign extension fix
Robert Jennings [Wed, 17 Jan 2007 16:50:20 +0000 (10:50 -0600)]
[POWERPC] atomic_dec_if_positive sign extension fix

On 64-bit machines, if an atomic counter is explicitly set to a
negative value, the atomic_dec_if_positive function will decrement and
store the next smallest value in the atomic counter, contrary to its
intended operation.

The comparison to determine if the decrement will make the result
negative was done by the "addic." instruction, which operates on a
64-bit value, namely the zero-extended word loaded from the atomic
variable.  This patch uses an explicit word compare (cmpwi) and
changes the addic. to an addi (also changing "=&r" to "=&b" so that r0
isn't used, and addi doesn't become li).

This also fixes a bug for both 32-bit and 64-bit in that previously
0x80000000 was considered positive, since the result after
decrementing is positive.  Now it is considered negative.

Also, I clarify the return value in the comments just to make it clear
that the value returned is always the decremented value, even if that
value is not stored back to the atomic counter.

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
14 years ago[POWERPC] Fix OF node refcnt underflow in 836x and 832x platform code
Li Yang [Wed, 17 Jan 2007 06:42:22 +0000 (14:42 +0800)]
[POWERPC] Fix OF node refcnt underflow in 836x and 832x platform code

Incorrect use of of_find_node_by_name() causes of_node_put()
on a node which has already been put.  It causes the refcount of
the node to underflow, which triggers the WARN_ON in kref_get
for 836x and 832x.  This fixes it.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
14 years ago[POWERPC] Make it blatantly clear; mpc5200 device tree is not yet stable
Grant Likely [Fri, 19 Jan 2007 07:00:14 +0000 (00:00 -0700)]
[POWERPC] Make it blatantly clear; mpc5200 device tree is not yet stable

Documentation-only change.  The 5200 device tree layout has not yet
stablized, so nobody should depend on the layout of the tree.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Sylvain Munaut <tnt@246tNt.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
14 years ago[POWERPC] Fix broken DMA on non-LPAR pSeries
Linas Vepstas [Thu, 11 Jan 2007 01:16:29 +0000 (19:16 -0600)]
[POWERPC] Fix broken DMA on non-LPAR pSeries

It appears that the iommu table address is never stored, and thus
never found, on non-lpar systems. Thus, for example, during boot:

<7>[   93.067916] PCI: Scanning bus 0001:41
<7>[   93.068542] PCI: Found 0001:41:01.0 [8086/100f] 000200 00
<7>[   93.068550] PCI: Calling quirk c0000000007822e0 for 0001:41:01.0
<7>[   93.069815] PCI: Fixups for bus 0001:41
<4>[   93.070167] iommu: Device 0001:41:01.0 has no iommu table
<7>[   93.070251] PCI: Bus scan for 0001:41 returning with max=41

No iommu table? How can that be? Well, circa line 471 of
arch/powerpc/platforms/pseries/iommu.c we see the code:

   while (dn && PCI_DN(dn) && PCI_DN(dn)->iommu_table == NULL)
      dn = dn->parent;

and a few lines later is the surprising print statement about
the missing table.  Seems that this loop ran unto the end, never
once finding a non-null PCI_DN(dn)->iommu_table.

The problem can be found a few lines earlier: it sems that the
value of PCI_DN(dn)->iommu_table is never ever set. Thus, the
patch sets it.

The patch was tested on a Power4 system running in full system
partition mode, which is where I saw the problem. It works; I've
not done any wider testing. Had a brief discussion on this on irc.

Signed-off-by: Linas Vepstas <linas@austin.ibm.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
14 years ago[POWERPC] Fix cell's mmio nvram to properly parse device tree
Benjamin Herrenschmidt [Thu, 11 Jan 2007 05:08:41 +0000 (16:08 +1100)]
[POWERPC] Fix cell's mmio nvram to properly parse device tree

The mmio nvram driver (used by cell only atm) isn't properly parsing
the device-tree, meaning that nvram isn't found correctly on the new
Cell blades.  It works ok for old blades where the nvram is at the
root of the device tree but fails on Malta and CAB when it's hanging
off axon.  This fixes it by using the proper OF parsing functions.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
14 years ago[POWERPC] Remove bogus sanity check in pci -> OF node code
Benjamin Herrenschmidt [Thu, 11 Jan 2007 05:38:22 +0000 (16:38 +1100)]
[POWERPC] Remove bogus sanity check in pci -> OF node code

The new implementation of pci_device_to_OF_node() on ppc32 has a bogus
sanity check in it that can cause oopses at boot when no device node is
present, and might hit correct cases with older/weird apple device-trees
where they have the type "vci" for the chaos bridge.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
14 years agohid-core.c: Adds GTCO CalComp Interwrite IPanel PIDs to blacklist
Jeremy Roberson [Fri, 19 Jan 2007 22:44:18 +0000 (15:44 -0700)]
hid-core.c: Adds GTCO CalComp Interwrite IPanel PIDs to blacklist

Adds GTCO CalComp Interwrite IPanels to the hid-core.c blacklist.

Signed-off-by: Jeremy A. Roberson <jroberson@gtcocalcomp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: put usb_interface instead of usb_device into hid->dev to fix udevinfo breakage
Anssi Hannula [Fri, 19 Jan 2007 17:28:17 +0000 (19:28 +0200)]
HID: put usb_interface instead of usb_device into hid->dev to fix udevinfo breakage

The commit 4916b3a57fc94664677d439b911b8aaf86c7ec23 introduced a
hid regression between 2.6.19 and 2.6.20-rc1. The device put in
input_dev->cdev is now of type usb_device instead of usb_interface.

Before:
> # readlink -f /sys/class/input/input6/event4/device
> /sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1
After:
> # readlink -f /sys/class/input/input3/event3/device
> /sys/devices/pci0000:00/0000:00:10.0/usb1/1-1

This causes breakage:
> # udevinfo -q all -n /dev/input/event3
> P: /class/input/input3/event3
> N: input/event3
> S: input/by-path/pci-1-1--event-
> E: ID_SERIAL=noserial
> E: ID_PATH=pci-1-1-

No ID_MODEL, ID_VENDOR, ID_REVISION, ID_TYPE etc etc.

Fix this by assigning the intf->dev into hid->dev, and fixing
all the users.

Signed-off-by: Anssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: add missing RX, RZ and RY enum values to hid-debug output
Simon Budig [Mon, 15 Jan 2007 17:34:32 +0000 (18:34 +0100)]
HID: add missing RX, RZ and RY enum values to hid-debug output

This trivial change adds some missing enum values to the hid-debug output.

Signed-off-by: Simon Budig <simon@budig.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: hid/hid-input.c doesn't need to include linux/usb/input.h
Jiri Kosina [Mon, 15 Jan 2007 23:30:42 +0000 (00:30 +0100)]
HID: hid/hid-input.c doesn't need to include linux/usb/input.h

There is no reason for generic hid-input.c to include usb-specific
input.h.

As a sideeffect, this also fixes warning of redefinition of dbg()
macro, when hid-input.c is compiled with DEBUG (as there is a clash
between dbg() from hid.h and usb/input.h).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: compilation fix when DEBUG_DATA is defined
Jiri Kosina [Mon, 15 Jan 2007 22:53:05 +0000 (23:53 +0100)]
HID: compilation fix when DEBUG_DATA is defined

hid/hid-core.c references 'len' variable when DEBUG_DATA is defined,
but the actual name of the variable is 'size'. Fix it.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: proper LED-mapping for SpaceNavigator
Simon Budig [Mon, 15 Jan 2007 16:28:47 +0000 (17:28 +0100)]
HID: proper LED-mapping for SpaceNavigator

This change introduces a mapping for LED indicators between the HID
specification and the Linux input subsystem. The previous code properly
mapped the LEDs relevant for Keyboards, but garbeled the remaining ones.
With this change all LED enums from the input system get mapped to more
or less equivalent LED numbers from the HID specification.

This patch also ensures that the unused bits in a HID report to the
device are zeroed out. This makes the 3Dconnexion SpaceNavigator fully
usable with the linux input system.

Signed-off-by: Simon Budig <simon@budig.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: update MAINTAINERS entry for USB-HID
Jiri Kosina [Mon, 15 Jan 2007 08:56:21 +0000 (09:56 +0100)]
HID: update MAINTAINERS entry for USB-HID

Change USB-HID maintainer from Vojtech Pavlik to Jiri Kosina.

Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: GEYSER4_ISO needs quirk
Adrian Friedli [Sun, 14 Jan 2007 21:12:43 +0000 (22:12 +0100)]
HID: GEYSER4_ISO needs quirk

I've got a newer MacBook with core2duo. Two keys on the keyboard are
swapped, "unswaping" works with the same trick as GEYSER3_ISO.

Signed-off-by: Adrian Friedli <masteradi@gmx.ch>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years agoHID: fix some ARM builds due to HID brokenness - make USB_HID depend on INPUT
Russell King [Fri, 12 Jan 2007 21:53:51 +0000 (21:53 +0000)]
HID: fix some ARM builds due to HID brokenness - make USB_HID depend on INPUT

We have USB_HID _newly_ selected in configurations which didn't
have it before, which overrides CONFIG_HID and builds HID without
input support.

Nevertheless, here's a patch to solve more of the same that my original
patch attempted to solve.  The original patch is still required.  Seems
to solve the final instance of this problem here.

Signed-off-by: Russell King <rmk+lkml@arm.linux.org.uk>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
14 years ago[MIPS] Delete duplicate call to load_irq_save.
Ralf Baechle [Tue, 19 Dec 2006 01:12:42 +0000 (02:12 +0100)]
[MIPS] Delete duplicate call to load_irq_save.

This call may have resulted to local_tlb_flush_range returning with
interrupts disabled resulting in excessive interrupt latency.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years ago[MIPS] SMTC: Fix cp0 hazard.
Ralf Baechle [Wed, 17 Jan 2007 18:58:44 +0000 (18:58 +0000)]
[MIPS] SMTC: Fix cp0 hazard.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agohwmon/w83793: Hide invalid VID readings
Gong Jun [Thu, 18 Jan 2007 21:14:24 +0000 (22:14 +0100)]
hwmon/w83793: Hide invalid VID readings

Ignore the VID readings when the motherboard has not designed
the function.

Signed-off-by: Gong Jun <jgong@winbond.com>
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agohwmon/w83793: Fix the fan input detection
Rudolf Marek [Thu, 18 Jan 2007 21:14:24 +0000 (22:14 +0100)]
hwmon/w83793: Fix the fan input detection

Catch the cases when alternative pins are used to route the
fan9-12 input.

Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Gong Jun <jgong@winbond.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agohwmon/w83793: Ignore disabled temperature channels
Gong Jun [Thu, 18 Jan 2007 21:14:24 +0000 (22:14 +0100)]
hwmon/w83793: Ignore disabled temperature channels

Ignore the temperature readings when its channel is disabled,
ignore AMDSI readings.

Signed-off-by: Gong Jun <jgong@winbond.com>
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agohwmon: Fix the VRD 11 decoding
Jean Delvare [Thu, 18 Jan 2007 21:14:23 +0000 (22:14 +0100)]
hwmon: Fix the VRD 11 decoding

I wonder how we came up with such a broken test in the first place.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agohwmon/w83793: Remove the description of AMDSI and update the voltage formula
Gong Jun [Thu, 18 Jan 2007 21:14:23 +0000 (22:14 +0100)]
hwmon/w83793: Remove the description of AMDSI and update the voltage formula

Fix the driver to match the information in datasheet 1.0. AMD
SI interface is marked as reserved, computing formula for 5VDD
and 5VSB is updated.

Signed-off-by: Gong Jun <jgong@winbond.com>
Signed-off-by: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
14 years agoNTFS: Forgot to bump version number in makefile to 2.1.28...
Anton Altaparmakov [Thu, 18 Jan 2007 10:28:18 +0000 (10:28 +0000)]
NTFS: Forgot to bump version number in makefile to 2.1.28...

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
14 years agoNTFS: 2.1.28 - Fix deadlock reported by Sergey Vlasov due to ntfs_put_inode().
Anton Altaparmakov [Thu, 18 Jan 2007 09:42:48 +0000 (09:42 +0000)]
NTFS: 2.1.28 - Fix deadlock reported by Sergey Vlasov due to ntfs_put_inode().

- Fix deadlock in fs/ntfs/inode.c::ntfs_put_inode().  Thanks to Sergey
  Vlasov for the report and detailed analysis of the deadlock.  The fix
  involved getting rid of ntfs_put_inode() altogether and hence NTFS no
  longer has a ->put_inode super operation.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
14 years agoV4L/DVB (5023): Fix compilation on ppc32 architecture
Mauro Carvalho Chehab [Sun, 7 Jan 2007 11:51:05 +0000 (08:51 -0300)]
V4L/DVB (5023): Fix compilation on ppc32 architecture

There's a problem, pointed by Meelis Roos <mroos@linux.ee>, that, on ppc32 arch,
with some gcc versions (noticed with prerelease 4.1.2 20061115), compilation
fails, due the lack of __ucmpdi2 to do the required 64-bit comparision.
This patch takes some sugestions made by Andrew Morton <akpm@osdl.org>,
Stelian Pop <stelian@popies.net> and Segher Boessenkool <segher@kernel.crashing.org>

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
14 years agoV4L/DVB (5071): Tveeprom: autodetect LG TAPC G701D as tuner type 37
Michael Krufky [Fri, 12 Jan 2007 20:38:05 +0000 (17:38 -0300)]
V4L/DVB (5071): Tveeprom: autodetect LG TAPC G701D as tuner type 37

autodetect LG TAPC G701D as tuner type 37.
Thanks to Adonis Papas, for pointing out the missing autodetection
for this tuner.

Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
14 years agoV4L/DVB (5069): Fix bttv and friends on 64bit machines with lots of memory
Gerd Hoffmann [Sat, 13 Jan 2007 00:26:32 +0000 (21:26 -0300)]
V4L/DVB (5069): Fix bttv and friends on 64bit machines with lots of memory

We have a DMA32 zone now, lets use it to make sure the card
can reach the memory we have allocated for the video frame
buffers.

Signed-off-by: Gerds Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
14 years agoV4L/DVB (5033): MSI TV@nywhere Plus fixes
hermann pitton [Mon, 8 Jan 2007 00:19:48 +0000 (21:19 -0300)]
V4L/DVB (5033): MSI TV@nywhere Plus fixes

- MSI TV@nywhere Plus. Fix radio, S-Video and external analog audio in
  as far we can know currently.

Signed-off-by: Hermann Pitton <hermann-pitton@arcor.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
14 years agoV4L/DVB (5029): Ks0127 status flags
Martin Samuelsson [Sun, 7 Jan 2007 23:50:27 +0000 (20:50 -0300)]
V4L/DVB (5029): Ks0127 status flags

Or status flags together in DECODER_GET_STATUS instead of and-zapping them.

Signed-off-by: Martin Samuelsson <sam@home.se>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
14 years agoV4L/DVB (5024): Fix quickcam communicator driver for big endian architectures
Grant Likely [Sun, 7 Jan 2007 13:33:30 +0000 (10:33 -0300)]
V4L/DVB (5024): Fix quickcam communicator driver for big endian architectures

Host endianess does not affect the order that pixel rgb data comes
in from the quickcam (the values are bytes, not words or longs).  The
driver is erroniously swapping the order of rgb values for big endian
machines.  This patch is needed get the Quickcam communicator working
on big endian machines (tested on powerpc)

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
14 years agoV4L/DVB (5021): Cx88xx: Fix lockup on suspend
Robert Hancock [Sun, 7 Jan 2007 11:12:19 +0000 (08:12 -0300)]
V4L/DVB (5021): Cx88xx: Fix lockup on suspend

Suspending with the cx88xx module loaded causes the system to lock up
because the cx88_audio_thread kthread was missing a try_to_freeze()
call, which caused it to go into a tight loop and result in softlockup
when suspending. Fix that.

Signed-off-by: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
14 years agoV4L/DVB (5020): Fix: disable interrupts while at KM_BOUNCE_READ
Mauro Carvalho Chehab [Sun, 14 Jan 2007 12:14:17 +0000 (10:14 -0200)]
V4L/DVB (5020): Fix: disable interrupts while at KM_BOUNCE_READ

vivi.c uses the KM_BOUNCE_READ with local interrupts enabled.
This means that if a disk interrupt occurs while vivi.c is using this
fixmap slot, the vivi.c driver will, upon return from that interrupt, find
that the fixmap slot now points at a different physical page.
The net result will probably be rare corruption of disk file contents,
because viv.c will now be altering the page which the disk code was
recently using.

Thanks to Andrew Morton for pointing this.
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
14 years agoV4L/DVB (5019): Fix the frame->grabstate update in read() entry point.
Thierry MERLE [Fri, 29 Dec 2006 23:32:08 +0000 (20:32 -0300)]
V4L/DVB (5019): Fix the frame->grabstate update in read() entry point.

The Coverity checker spotted that in usbvision_v4l2_read(), the variable
"frmx" is never assigned any value different from -1, but it's used an
an array index in "usbvision->frame[frmx]".
Thanks to Adrian Bunk <bunk@stusta.de> for warning about that.

Signed-off-by: Thierry MERLE <thierry.merle@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
14 years agommc: Correct definition of R6
Philip Langdale [Thu, 4 Jan 2007 15:04:47 +0000 (07:04 -0800)]
mmc: Correct definition of R6

During development of SDHC support, it was discovered that the definition
for R6 was incorrect. This patch fixes that and patches the drivers that
do switch on the response type.

Signed-off-by: Philip Langdale <philipl@overt.org>
Cc: Alex Dubov <oakad@yahoo.com>
Cc: Pavel Pisa <ppisa@pikron.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
14 years agoomap: Update MMC response types
Carlos Eduardo Aguiar [Mon, 15 Jan 2007 05:38:15 +0000 (06:38 +0100)]
omap: Update MMC response types

This patch is a fix in order to update MMC response types. This modification is
needed to allow SD card support on OMAP platforms.

Signed-off-by: Carlos Eduardo Aguiar <carlos.aguiar@indt.org.br>
Signed-off-by: Yuha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
14 years agoLinux v2.6.20-rc5 v2.6.20-rc5
Linus Torvalds [Fri, 12 Jan 2007 18:54:26 +0000 (10:54 -0800)]
Linux v2.6.20-rc5

14 years ago[PATCH] blktrace: only add a bounce trace when we really bounce
Jens Axboe [Fri, 12 Jan 2007 11:20:26 +0000 (12:20 +0100)]
[PATCH] blktrace: only add a bounce trace when we really bounce

Currently we issue a bounce trace when __blk_queue_bounce() is called,
but that merely means that the device has a lower dma mask than the
higher pages in the system. The bio itself may still be lower pages. So
move the bounce trace into __blk_queue_bounce(), when we know there will
actually be page bouncing.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Fri, 12 Jan 2007 02:26:28 +0000 (18:26 -0800)]
Merge branch 'for-linus' of /linux/kernel/git/jikos/hid

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid:
  HID: Fix DRIVER_DESC macro
  HID: mousepoll parameter makes no sense for generic HID
  HID: tiny patch to remove a kmalloc cast
  HID: fix mappings for DiNovo Edge Keyboard - Logitech USB BT receiver

14 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Fri, 12 Jan 2007 02:25:44 +0000 (18:25 -0800)]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  Revert "ACPI: ibm-acpi: make non-generic bay support optional"
  ACPI: update MAINTAINERS
  ACPI: schedule obsolete features for deletion
  ACPI: delete two spurious ACPI messages
  ACPI: rename cstate_entry_s to cstate_entry
  ACPI: ec: enable printk on cmdline use
  ACPI: Altix: ACPI _PRT support

14 years agoMerge branch 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 12 Jan 2007 02:25:20 +0000 (18:25 -0800)]
Merge branch 'drm-patches' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  i915: Fix a DRM_ERROR that should be DRM_DEBUG.

14 years ago[PATCH] PCMCIA: fix drivers broken by recent cleanup
Daniel Ritz [Fri, 8 Dec 2006 17:07:01 +0000 (18:07 +0100)]
[PATCH] PCMCIA: fix drivers broken by recent cleanup

Setting .ConfigBase and .Present is now done at the pcmcia core.

The driver cleanup missed a few places where the driver did set .Present
to PRESENT_OPTION and later to the values from the CIS.  Setting to
PRESENT_OPTION now overrides the values from the CIS.  So just remove
those lines.

Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] FD_ZERO build fix
Andrew Morton [Thu, 11 Jan 2007 07:15:45 +0000 (23:15 -0800)]
[PATCH] FD_ZERO build fix

unionfs managed to hit this on s390.  Some architectures use __ptr_t in their
FD_ZERO implementation.  We don't have a __ptr_t.  Switch them over to plain
old void*.

Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Josef 'Jeff' Sipek <jsipek@cs.sunysb.edu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] fix typo in geode_configre()@cyrix.c
takada [Thu, 11 Jan 2007 07:15:44 +0000 (23:15 -0800)]
[PATCH] fix typo in geode_configre()@cyrix.c

We write back the wrong register when configuring the Geode processor.
Instead of storing to CCR4, it stores to CCR3.

Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] Fix HWRNG built-in initcalls priority
Michael Buesch [Thu, 11 Jan 2007 07:15:43 +0000 (23:15 -0800)]
[PATCH] Fix HWRNG built-in initcalls priority

This changes all HWRNG driver initcalls to module_init().  We must probe
the RNGs after the major kernel subsystems are already up and running (like
PCI).

This fixes Bug 7730.
http://bugzilla.kernel.org/show_bug.cgi?id=7730

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jan Beulich <jbeulich@novell.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] intel-rng workarounds
Jan Beulich [Thu, 11 Jan 2007 07:15:41 +0000 (23:15 -0800)]
[PATCH] intel-rng workarounds

Add a load option to intel-rng to allow skipping the FWH detection,
necessary in case the BIOS has locked read-only the firmware hub space.
Also prevent any attempt to write to firmware space if it cannot be write
enabled (apparently caused hangs on some systems not having an FWH and thus
also not having a respective RNG).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] Revert bd_mount_mutex back to a semaphore
David Chinner [Thu, 11 Jan 2007 07:15:41 +0000 (23:15 -0800)]
[PATCH] Revert bd_mount_mutex back to a semaphore

Revert bd_mount_mutex back to a semaphore so that xfs_freeze -f /mnt/newtest;
xfs_freeze -u /mnt/newtest works safely and doesn't produce lockdep warnings.

(XFS unlocks the semaphore from a different task, by design.  The mutex
code warns about this)

Signed-off-by: Dave Chinner <dgc@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] really fix funsoft driver
David Miller [Thu, 11 Jan 2007 07:15:40 +0000 (23:15 -0800)]
[PATCH] really fix funsoft driver

Fix void cast and re-enable on sparc.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] NFS: Fix race in nfs_release_page()
Trond Myklebust [Thu, 11 Jan 2007 07:15:39 +0000 (23:15 -0800)]
[PATCH] NFS: Fix race in nfs_release_page()

    NFS: Fix race in nfs_release_page()

    invalidate_inode_pages2() may find the dirty bit has been set on a page
    owing to the fact that the page may still be mapped after it was locked.
    Only after the call to unmap_mapping_range() are we sure that the page
    can no longer be dirtied.
    In order to fix this, NFS has hooked the releasepage() method and tries
    to write the page out between the call to unmap_mapping_range() and the
    call to remove_mapping(). This, however leads to deadlocks in the page
    reclaim code, where the page may be locked without holding a reference
    to the inode or dentry.

    Fix is to add a new address_space_operation, launder_page(), which will
    attempt to write out a dirty page without releasing the page lock.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
    Also, the bare SetPageDirty() can skew all sort of accounting leading to
    other nasties.

[akpm@osdl.org: cleanup]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] KVM: add VM-exit profiling
Ingo Molnar [Thu, 11 Jan 2007 07:15:38 +0000 (23:15 -0800)]
[PATCH] KVM: add VM-exit profiling

This adds the profile=kvm boot option, which enables KVM to profile VM
exits.

Use: "readprofile -m ./System.map | sort -n" to see the resulting
output:

   [...]
   18246 serial_out                               148.3415
   18945 native_flush_tlb                         378.9000
   23618 serial_in                                212.7748
   29279 __spin_unlock_irq                        622.9574
   43447 native_apic_write                        2068.9048
   52702 enable_8259A_irq                         742.2817
   54250 vgacon_scroll                             89.3740
   67394 ide_inb                                  6126.7273
   79514 copy_page_range                           98.1654
   84868 do_wp_page                                86.6000
  140266 pit_read                                 783.6089
  151436 ide_outb                                 25239.3333
  152668 native_io_delay                          21809.7143
  174783 mask_and_ack_8259A                       783.7803
  362404 native_set_pte_at                        36240.4000
 1688747 total                                      0.5009

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] md: pass down BIO_RW_SYNC in raid{1,10}
Lars Ellenberg [Thu, 11 Jan 2007 07:15:37 +0000 (23:15 -0800)]
[PATCH] md: pass down BIO_RW_SYNC in raid{1,10}

md raidX make_request functions strip off the BIO_RW_SYNC flag, thus
introducing additional latency.

Fixing this in raid1 and raid10 seems to be straightforward enough.

For our particular usage case in DRBD, passing this flag improved some
initialization time from ~5 minutes to ~5 seconds.

Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Lars Ellenberg <lars@linbit.com>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] i386: sched_clock using init data tsc_disable fix
Vivek Goyal [Thu, 11 Jan 2007 07:15:36 +0000 (23:15 -0800)]
[PATCH] i386: sched_clock using init data tsc_disable fix

o sched_clock() a non-init function is using init data tsc_disable. This
  is flagged by MODPOST on i386 if CONFIG_RELOCATABLE=y

WARNING: vmlinux - Section mismatch: reference to .init.data:tsc_disable from .text between 'sched_clock' (at offset 0xc0109d58) and 'tsc_update_callback'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] Kdump documentation update
Vivek Goyal [Thu, 11 Jan 2007 07:15:35 +0000 (23:15 -0800)]
[PATCH] Kdump documentation update

o Kdump documentation update.
- Update details for using relocatable kernel.
- Start using kexec-tools-testing release as it is latest and old
  kexec-tools can't load relocatable bzImage file.
- Also add kdump on ia64 specific details.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Horms <horms@verge.net.au>
Cc: Mohan Kumar M <mohan@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] Change cpu_up and co from __devinit to __cpuinit
Gautham R Shenoy [Thu, 11 Jan 2007 07:15:34 +0000 (23:15 -0800)]
[PATCH] Change cpu_up and co from __devinit to __cpuinit

Compiling the kernel with CONFIG_HOTPLUG = y and CONFIG_HOTPLUG_CPU = n
with CONFIG_RELOCATABLE = y generates the following modpost warnings

WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141b7d) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141b9c) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.text:__cpu_up
from .text between '_cpu_up' (at offset 0xc0141bd8) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141c05) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141c26) and 'cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.data: from
.text between '_cpu_up' (at offset 0xc0141c37) and 'cpu_up'

This is because cpu_up, _cpu_up and __cpu_up (in some architectures) are
defined as __devinit
AND
__cpu_up calls some __cpuinit functions.

Since __cpuinit would map to __init with this kind of a configuration,
we get a .text refering .init.data warning.

This patch solves the problem by converting all of __cpu_up, _cpu_up
and cpu_up from __devinit to __cpuinit. The approach is justified since
the callers of cpu_up are either dependent on CONFIG_HOTPLUG_CPU or
are of __init type.

Thus when CONFIG_HOTPLUG_CPU=y, all these cpu up functions would land up
in .text section, and when CONFIG_HOTPLUG_CPU=n, all these functions would
land up in .init section.

Tested on a i386 SMP machine running linux-2.6.20-rc3-mm1.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Cc: Vivek Goyal <vgoyal@in.ibm.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] rtc-sh: correctly report rtc_wkalrm.enabled
David Brownell [Thu, 11 Jan 2007 07:15:32 +0000 (23:15 -0800)]
[PATCH] rtc-sh: correctly report rtc_wkalrm.enabled

This fixes the SH rtc driver to
  (a) correctly report 'enabled' status with other alarm status;
  (b) not duplicate that status in its procfs dump

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] qconf: (re)fix SIGSEGV on empty menu items
Roman Zippel [Thu, 11 Jan 2007 07:15:31 +0000 (23:15 -0800)]
[PATCH] qconf: (re)fix SIGSEGV on empty menu items

Back out the recent fix for this bug, fix it by correctly initialising
ConfigInfoView.sym.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Cc: "Cyrill V. Gorcunov" <gorcunov@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] Fix sparsemem on Cell
Dave Hansen [Thu, 11 Jan 2007 07:15:30 +0000 (23:15 -0800)]
[PATCH] Fix sparsemem on Cell

Fix an oops experienced on the Cell architecture when init-time functions,
early_*(), are called at runtime.  It alters the call paths to make sure
that the callers explicitly say whether the call is being made on behalf of
a hotplug even, or happening at boot-time.

It has been compile tested on ppc64, ia64, s390, i386 and x86_64.

Acked-by: Arnd Bergmann <arndb@de.ibm.com>
Signed-off-by: Dave Hansen <haveblue@us.ibm.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] increment pos before looking for the next cap in __pci_find_next_ht_cap
Brice Goglin [Thu, 11 Jan 2007 07:15:29 +0000 (23:15 -0800)]
[PATCH] increment pos before looking for the next cap in __pci_find_next_ht_cap

While testing 2.6.20-rc3 on a machine with some CK804 chipsets, we noticed
that quirk_nvidia_ck804_msi_ht_cap() was not detecting HT MSI capabilities
anymore.  It is actually caused by the MSI mapping on the root chipset
being the 2nd HT capability in the chain.  pci_find_ht_capability() does
not seem to find anything but the first HT cap correctly, because it
forgets to increment the position before looking for the next cap.  The
following patch seems to fix it.

At least, this proves that having a ttl is good idea since the machine
would have been stucked in an infinite loop if we didn't have a ttl :)

We have to pass pos + PCI_CAP_LIST_NEXT to __pci_find_next_cap_ttl to
get the next HT cap instead of the same one again.

Signed-off-by: Brice Goglin <brice@myri.com>
Signed-off-by: Andrew J. Gallatin <gallatin@myri.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years ago[PATCH] sched: tasks cannot run on cpus onlined after boot
Nathan Lynch [Thu, 11 Jan 2007 07:15:28 +0000 (23:15 -0800)]
[PATCH] sched: tasks cannot run on cpus onlined after boot

Commit 5c1e176781f43bc902a51e5832f789756bff911b ("sched: force /sbin/init
off isolated cpus") sets init's cpus_allowed to a subset of cpu_online_map
at boot time, which means that tasks won't be scheduled on cpus that are
added to the system later.

Make init's cpus_allowed a subset of cpu_possible_map instead.  This should
still preserve the behavior that Nick's change intended.

Thanks to Giuliano Pochini for reporting this and testing the fix:

http://ozlabs.org/pipermail/linuxppc-dev/2006-December/029397.html

Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years agoDon't put "linux_banner" in the .init section
Linus Torvalds [Fri, 12 Jan 2007 02:18:04 +0000 (18:18 -0800)]
Don't put "linux_banner" in the .init section

It might save a few bytes after bootup, but it causes the string to be
linked in at the end of the final vmlinux image, which defeats the whole
point of doing all this, namely allowing some broken user-space binaries
to search for the kernel version string in the kernel binary.

So just remove the __init specifier.

Cc: Olaf Hering <olaf@aepfle.de>
Cc: Jean Delvare <khali@linux-fr.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Andrew Morton <akpm@osdl.org>
Acked-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years agoRevert "ACPI: ibm-acpi: make non-generic bay support optional"
Henrique de Moraes Holschuh [Thu, 11 Jan 2007 07:58:15 +0000 (02:58 -0500)]
Revert "ACPI: ibm-acpi: make non-generic bay support optional"

This reverts commit 2df910b4c3edcce9a0c12394db6f5f4a6e69c712.

ACPI_BAY has not been merged into mainline yet, so the changes to ibm-acpi
related Kconfig entries that depend on ACPI_BAY were permanently disabling
ibm-acpi bay support.  This is a serious regression for ThinkPad users.

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoPull sgi into release branch
Len Brown [Thu, 11 Jan 2007 06:55:34 +0000 (01:55 -0500)]
Pull sgi into release branch

14 years agoPull trivial into release branch
Len Brown [Thu, 11 Jan 2007 06:55:25 +0000 (01:55 -0500)]
Pull trivial into release branch

14 years agoACPI: update MAINTAINERS
Len Brown [Tue, 9 Jan 2007 00:03:28 +0000 (19:03 -0500)]
ACPI: update MAINTAINERS

s/Maintained/Supported/
and document some sub-maintainers for ACPI drivers.

Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoACPI: schedule obsolete features for deletion
Len Brown [Thu, 11 Jan 2007 06:49:44 +0000 (01:49 -0500)]
ACPI: schedule obsolete features for deletion

Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoACPI: delete two spurious ACPI messages
Venkatesh Pallipadi [Thu, 11 Jan 2007 04:16:36 +0000 (23:16 -0500)]
ACPI: delete two spurious ACPI messages

ACPI: Getting cpuindex for acpiid 0x4

acpi_processor-0742 [00] processor_preregister_: Error while parsing _PSD domain information. Assuming no coordination

http://bugzilla.kernel.org/show_bug.cgi?id=7286

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoACPI: rename cstate_entry_s to cstate_entry
Venkatesh Pallipadi [Thu, 11 Jan 2007 04:08:38 +0000 (23:08 -0500)]
ACPI: rename cstate_entry_s to cstate_entry

style change only.

Signed-off-by: Len Brown <len.brown@intel.com>
14 years agoMerge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6
Linus Torvalds [Thu, 11 Jan 2007 02:06:14 +0000 (18:06 -0800)]
Merge branch 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6:
  [PATCH] x86-64: Fix warnings in ia32_aout.c
  [PATCH] i386: Convert some functions to __init to avoid MODPOST warnings
  [PATCH] i386: Fix memory hotplug related MODPOST generated warning
  [PATCH] x86-64: tighten up printks
  [PATCH] x86-64: - Ignore long SMI interrupts in clock calibration
  [PATCH] x86-64: pci quirks MODPOST warning fix
  [PATCH] x86-64: Modpost whitelist reference to more symbols (pattern 3)
  [PATCH] x86-64: modpost add more symbols to whitelist pattern2
  [PATCH] i386: make apic probe function non-init
  [PATCH] i386: cpu hotplug/smpboot misc MODPOST warning fixes
  [PATCH] x86-64: Use different constraint for gcc < 4.1 in bitops.h
  [PATCH] x86-64: Make noirqdebug_setup function non init to fix modpost warning
  [PATCH] i386: Update defconfig
  [PATCH] x86-64: Update defconfig

14 years ago[PATCH] x86-64: Fix warnings in ia32_aout.c
Andi Kleen [Thu, 11 Jan 2007 00:52:45 +0000 (01:52 +0100)]
[PATCH] x86-64: Fix warnings in ia32_aout.c

Fix

linux/arch/x86_64/ia32/ia32_aout.c: In function ‘create_aout_tables’:
linux/arch/x86_64/ia32/ia32_aout.c:244: warning: cast from pointer to integer of different size
linux/arch/x86_64/ia32/ia32_aout.c:253: warning: cast from pointer to integer of different size

with gcc 4.3
Signed-off-by: Andi Kleen <ak@suse.de>
14 years ago[PATCH] i386: Convert some functions to __init to avoid MODPOST warnings
Vivek Goyal [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] i386: Convert some functions to __init to avoid MODPOST warnings

o Some functions which should have been in init sections as they are called
  only once. Put them in init sections. Otherwise MODPOST generates warning
  as these functions are placed in .text and they end up accessing something
  in init sections.

WARNING: vmlinux - Section mismatch: reference to .init.text:migration_init
from .text between 'do_pre_smp_initcalls' (at offset 0xc01000d1) and
'run_init_process'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
14 years ago[PATCH] i386: Fix memory hotplug related MODPOST generated warning
Vivek Goyal [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] i386: Fix memory hotplug related MODPOST generated warning

o Fix modpost generated warning.

WARNING: vmlinux - Section mismatch: reference to .init.text: from .text
between 'add_one_highpage_hotplug' (at offset 0xc0113d3f) and 'online_page'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
14 years ago[PATCH] x86-64: tighten up printks
Muli Ben-Yehuda [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] x86-64: tighten up printks

Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
14 years ago[PATCH] x86-64: - Ignore long SMI interrupts in clock calibration
Jack Steiner [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] x86-64: - Ignore long SMI interrupts in clock calibration

Ensure that no SMI interrupts occur between the read of the HPET & TSC
in the clock calibration loop.

I noticed that a 2.66GHz system incorrectly detected the processor
clock speed about 1/7 of the time:

time.c: Detected 2660.005 MHz processor. (most of the time)
time.c: Detected 2988.203 MHz processor. (sometime)

The problem is caused by an SMI interrupt occuring in hpet_calibrate_tsc()
between the read of the HPET & TSC. Prior to switching the BIOS into
ACPI mode, it appears that every 27msec an SMI interrupt occurs. The
SMI interrupt takes 4.8 msec to process.

Note: On my test system, TICK_MIN had to be >380. I picked 5000
to minimize risk of having a value that is too small for other
platforms.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Andi Kleen <ak@suse.de>
 arch/x86_64/kernel/time.c |   25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

14 years ago[PATCH] x86-64: pci quirks MODPOST warning fix
Vivek Goyal [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] x86-64: pci quirks MODPOST warning fix

o MODPOST generates warnings for i386 if kernel is compiled with
  CONFIG_RELOCATABLE=y

WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'asus_hides_smbus_lpc_ich6' (at offset 0xc0217d58) and 'quirk_cardbus_legacy'
WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'asus_hides_smbus_lpc' (at offset 0xc0217fd9) and 'pci_match_id'

o Two quirk functions which are non __init, are accessing data which is
  of type __init.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
14 years ago[PATCH] x86-64: Modpost whitelist reference to more symbols (pattern 3)
Vivek Goyal [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] x86-64: Modpost whitelist reference to more symbols (pattern 3)

o MODPOST generates warning on i386 if kernel is compiled with
  CONFIG_RELOCATABLE=y.

WARNING: vmlinux - Section mismatch: reference to .init.text:__init_begin from .text between 'free_initmem' (at offset 0xc0114fd3) and 'do_test_wp_bit'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'core_kernel_text' (at offset 0xc012aeae) and 'kernel_text_address'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'core_kernel_text' (at offset 0xc012aeb7) and 'kernel_text_address'
WARNING: vmlinux - Section mismatch: reference to .init.text:_sinittext from .text between 'get_symbol_pos' (at offset 0xc0135776) and 'reset_iter'
WARNING: vmlinux - Section mismatch: reference to .init.text:_einittext from .text between 'get_symbol_pos' (at offset 0xc013577d) and 'reset_iter'

o These symbols (__init_begin, _sinittext, _einittext) belong to init
  section and generally represent a section boundary. These are special
  symbols in the sense that their size is zero and no memory is allocated
  for them in init section. Their addr and value are same. So even if
  we free the init section, it is ok to reference them.

o Whitelist access to such select symbols in MODPOST.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
14 years ago[PATCH] x86-64: modpost add more symbols to whitelist pattern2
Vivek Goyal [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] x86-64: modpost add more symbols to whitelist pattern2

o MODPOST generates warning for i386 if compiled with CONFIG_RELOCATABLE=y
  and serial console support is enabled.

o Serial console setup function, serial8250_console_setup(), is a non __init
  function and it calls functions which are of type __init().
  (uart_parse_options() and uart_set_options()). Assuming, setup will
  be called during init time, changing serial8250_console_setup() to __init.

o Adding one more pattern to modpost whitelist. Console drivers might
  have *_console structures containing references to setup functions which
  can be of __init type. Don't generate warnings for those.

WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'serial8250_console' (at offset 0xc05a33d8) and 'serial8250_reg'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
14 years ago[PATCH] i386: make apic probe function non-init
Vivek Goyal [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] i386: make apic probe function non-init

o struct genapic contains pointer to probe() function which is of type
  __init. Hence MODPOST generates warning if kernel is compiled with
  CONFIG_RELOCATABLE=y for i386.

WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'apic_summit' (at offset 0xc058b504) and 'apic_bigsmp'
WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'apic_bigsmp' (at offset 0xc058b5a4) and 'cpu.4471'
WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'apic_es7000' (at offset 0xc058b644) and 'apic_default'
WARNING: vmlinux - Section mismatch: reference to .init.text: from .data between 'apic_default' (at offset 0xc058b6e4) and 'interrupt'

o One of the possible options is to put special case check in MODPOST to
  not emit warnings for this case but I think it is not a very good option
  in terms of maintenance.

o Another option is to make probe() function non __init. Anyway this function
  is really small so not freeing this memory after init is not a big deal.
  Secondly, from a programming perspective, probably genapic should not
  provide pointers to functions which have been freed as genapic is non
  __init and is used even after initialization is complete.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
14 years ago[PATCH] i386: cpu hotplug/smpboot misc MODPOST warning fixes
Vivek Goyal [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] i386: cpu hotplug/smpboot misc MODPOST warning fixes

o Misc smpboot/cpu hotplug path cleanups. I did those to supress the
  warnings generated by MODPOST. These warnings are visible only
  if CONFIG_RELOCATABLE=y.

o CONFIG_RELOCATABLE compiles the kernel with --emit-relocs option. This
  option retains relocation information in vmlinux file and MODPOST
  is quick to spit out "Section mismatch" warnings.

o This patch fixes some of those warnings. Many of the functions in
  smpboot case are __devinit type and they in turn accesses text/data which
  if of type __cpuinit. Now if CONFIG_HOTPLUG=y and CONFIG_HOTPLUG_CPU=n
  then we end up in cases where a function in .text segment is calling
  another function in .init.text segment and MODPOST emits warning.

WARNING: vmlinux - Section mismatch: reference to .init.text:identify_cpu from .text between 'smp_store_cpu_info' (at offset 0xc011020d) and 'do_boot_cpu'
WARNING: vmlinux - Section mismatch: reference to .init.text:init_gdt from .text between 'do_boot_cpu' (at offset 0xc01102ca) and '__cpu_up'
WARNING: vmlinux - Section mismatch: reference to .init.text:print_cpu_info from .text between 'do_boot_cpu' (at offset 0xc01105d0) and '__cpu_up'

o It also fixes the issues where CONFIG_HOTPLUG_CPU=y and start_secondary()
  is calling smp_callin() which in-turn calls synchronize_tsc_ap() which is
  of type __init. This should have meant broken CPU hotplug.

WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'start_secondary' (at offset 0xc011603f) and 'initialize_secondary'
WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'MP_processor_info' (at offset 0xc0116a4f) and 'mp_register_lapic'
WARNING: vmlinux - Section mismatch: reference to .init.data: from .text between 'MP_processor_info' (at offset 0xc0116a4f) and 'mp_register_lapic'

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andi Kleen <ak@suse.de>
14 years ago[PATCH] x86-64: Use different constraint for gcc < 4.1 in bitops.h
Andi Kleen [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] x86-64: Use different constraint for gcc < 4.1 in bitops.h

+m is really correct for a RMW instruction, but some older gccs
error out. I finally gave in and ifdefed it.

This fixes compilation errors with some compiler version.

Signed-off-by: Andi Kleen <ak@suse.de>
14 years ago[PATCH] x86-64: Make noirqdebug_setup function non init to fix modpost warning
Vivek Goyal [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] x86-64: Make noirqdebug_setup function non init to fix modpost warning

o noirqdebug_setup() is __init but it is being called by
  quirk_intel_irqbalance() which if of type __devinit. If CONFIG_HOTPLUG=y,
  quirk_intel_irqbalance() is put into text section and it is wrong to
  call a function in __init section.

o MODPOST flags this on i386 if CONFIG_RELOCATABLE=y

WARNING: vmlinux - Section mismatch: reference to .init.text:noirqdebug_setup from .text between 'quirk_intel_irqbalance' (at offset 0xc010969e) and 'i8237A_suspend'

o Make noirqdebug_setup() non-init.

Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
14 years ago[PATCH] i386: Update defconfig
Andi Kleen [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] i386: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
14 years ago[PATCH] x86-64: Update defconfig
Andi Kleen [Thu, 11 Jan 2007 00:52:44 +0000 (01:52 +0100)]
[PATCH] x86-64: Update defconfig

Signed-off-by: Andi Kleen <ak@suse.de>
14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Wed, 10 Jan 2007 23:57:09 +0000 (15:57 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  ieee1394: sbp2: fix probing of some DVD-ROM/RWs

14 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Wed, 10 Jan 2007 23:56:09 +0000 (15:56 -0800)]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
      [MIPS] Alchemy:  Fix PCI-memory access
  [MIPS] Fix N32 SysV IPC routines
  [MIPS] PNX8550: Fix system timer initialization

14 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Wed, 10 Jan 2007 23:55:10 +0000 (15:55 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  MMC: at91 mmc linkage updates
  ARM: OMAP: fix MMC workqueue changes

14 years ago [MIPS] Alchemy: Fix PCI-memory access
Alexander Bigga [Thu, 21 Dec 2006 10:25:19 +0000 (11:25 +0100)]
[MIPS] Alchemy:  Fix PCI-memory access

    The problem was introduced in 2.6.18.3 with the casting of some
    36bit-defines (PCI memory) in au1000.h to resource_size_t which may be
    u32 or u64 depending on the experimental CONFIG_RESOURCES_64BIT.

    With unset CONFIG_RESOURCES_64BIT, the pci-memory cannot be accessed
    because the ioremap in arch/mips/au1000/common/pci.c already used the
    truncated addresses.
    With set CONFIG_RESOURCES_64BIT, things get even worse, because PCI-scan
    aborts, due to resource conflict: request_resource() in arch/mips/pci/pci.c
    fails because the maximum iomem-address is 0xffffffff (32bit) but the
    pci-memory-start-address is 0x440000000 (36bit).

    To get pci working again, I propose the following patch:

    1. remove the resource_size_t-casting from au1000.h again
    2. make the casting in arch/mips/au1000/common/pci.c (it's allowed and
    necessary here. The 36bit-handling will be done in __fixup_bigphys_addr).

    With this patch pci works again like in 2.6.18.2, the gcc-compile warnings
    in pci.c are gone and it doesn't depend on CONFIG_EXPERIMENTAL.

Signed-off-by: Alexander Bigga <ab@mycable.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
---

14 years ago[MIPS] Fix N32 SysV IPC routines
Atsushi Nemoto [Wed, 10 Jan 2007 09:53:33 +0000 (18:53 +0900)]
[MIPS] Fix N32 SysV IPC routines

Add wrappers for N32 msg{snd,rcv}.  compat_sys_msg{snd,rcv} can not not be
used as system call entries as is.  This fix is based on Kaz Kylheku's
patch.

Also change a type of last argument of sysn32_semctl to match its true
size.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years ago[MIPS] PNX8550: Fix system timer initialization
Atsushi Nemoto [Tue, 9 Jan 2007 01:23:00 +0000 (10:23 +0900)]
[MIPS] PNX8550: Fix system timer initialization

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
14 years agoieee1394: sbp2: fix probing of some DVD-ROM/RWs
Stefan Richter [Wed, 10 Jan 2007 19:17:15 +0000 (20:17 +0100)]
ieee1394: sbp2: fix probing of some DVD-ROM/RWs

Since commit 98e238cd42be6c0852da519303cf0182690f8d9f in Linux 2.6.19,
"ieee1394: sbp2: don't prefer MODE SENSE 10", some FireWire DVD-ROMs and
DVD-RWs were mistaken as CD-ROM because sr_mod now sent MODE SENSE 6.
The MMC command set includes only MODE SENSE 10.
http://bugzilla.kernel.org/show_bug.cgi?id=7800

This fix lets sbp2 switch scsi_device.use_10_for_rw on for MMC LUs.
This should rather be done in the command set driver sr_mod, not in the
sbp2 transport driver, and an according patch will follow for a next
Linux release.

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
14 years ago[PATCH] fix linux banner format string
Roman Zippel [Wed, 10 Jan 2007 13:45:28 +0000 (14:45 +0100)]
[PATCH] fix linux banner format string

Revert previous attempts at messing with the linux banner string and
simply use a separate format string for proc.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Acked-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Andrew Morton <akpm@osdl.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Herbert Poetzl <herbert@13thfloor.at>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 10 Jan 2007 16:30:22 +0000 (08:30 -0800)]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPV4] devinet: inetdev_init out label moved after RCU assignment
  [INET]: style updates for the inet_sock->is_icsk assignment fix
  [SCTP]: Fix err_hdr assignment in sctp_init_cause.
  [NETFILTER]: tcp conntrack: fix IP_CT_TCP_FLAG_CLOSE_INIT value
  [NETFILTER]: nf_nat: fix hanging connections when loading the NAT module
  [NETFILTER]: arp_tables: fix userspace compilation
  [NETFILTER]: nf_conntrack_ipv6: fix crash when handling fragments

14 years ago[PATCH] MAINTAINERS: maintainer for sata_promise
Mikael Pettersson [Wed, 10 Jan 2007 08:33:53 +0000 (09:33 +0100)]
[PATCH] MAINTAINERS: maintainer for sata_promise

This patch adds myself as maintainer of the sata_promise
libata driver.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>