sfrench/cifs-2.6.git
12 months agobtrfs: trim: Check the range passed into to prevent overflow
Qu Wenruo [Tue, 28 May 2019 08:21:54 +0000 (16:21 +0800)]
btrfs: trim: Check the range passed into to prevent overflow

Normally the range->len is set to default value (U64_MAX), but when it's
not default value, we should check if the range overflows.

And if it overflows, return -EINVAL before doing anything.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agoBtrfs: fix sysfs warning and missing raid sysfs directories
Filipe Manana [Wed, 7 Aug 2019 10:21:46 +0000 (11:21 +0100)]
Btrfs: fix sysfs warning and missing raid sysfs directories

In the 5.3 merge window, commit 7c7e301406d0a9 ("btrfs: sysfs: Replace
default_attrs in ktypes with groups"), we started using the member
"defaults_groups" for the kobject type "btrfs_raid_ktype". That leads
to a series of warnings when running some test cases of fstests, such
as btrfs/027, btrfs/124 and btrfs/176. The traces produced by those
warnings are like the following:

  [116648.059212] kernfs: can not remove 'total_bytes', no directory
  [116648.060112] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
  (...)
  [116648.066482] CPU: 3 PID: 28500 Comm: umount Tainted: G        W         5.3.0-rc3-btrfs-next-54 #1
  (...)
  [116648.069376] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
  (...)
  [116648.072385] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
  [116648.073437] RAX: 0000000000000000 RBX: ffffffffc0c11998 RCX: 0000000000000000
  [116648.074201] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
  [116648.074956] RBP: ffffffffc0b9ca2f R08: 0000000000000000 R09: 0000000000000001
  [116648.075708] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
  [116648.076434] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
  [116648.077143] FS:  00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
  [116648.077852] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [116648.078546] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
  [116648.079235] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [116648.079907] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [116648.080585] Call Trace:
  [116648.081262]  remove_files+0x31/0x70
  [116648.081929]  sysfs_remove_group+0x38/0x80
  [116648.082596]  sysfs_remove_groups+0x34/0x70
  [116648.083258]  kobject_del+0x20/0x60
  [116648.083933]  btrfs_free_block_groups+0x405/0x430 [btrfs]
  [116648.084608]  close_ctree+0x19a/0x380 [btrfs]
  [116648.085278]  generic_shutdown_super+0x6c/0x110
  [116648.085951]  kill_anon_super+0xe/0x30
  [116648.086621]  btrfs_kill_super+0x12/0xa0 [btrfs]
  [116648.087289]  deactivate_locked_super+0x3a/0x70
  [116648.087956]  cleanup_mnt+0xb4/0x160
  [116648.088620]  task_work_run+0x7e/0xc0
  [116648.089285]  exit_to_usermode_loop+0xfa/0x100
  [116648.089933]  do_syscall_64+0x1cb/0x220
  [116648.090567]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [116648.091197] RIP: 0033:0x7f9cdc073b37
  (...)
  [116648.100046] ---[ end trace 22e24db328ccadf8 ]---
  [116648.100618] ------------[ cut here ]------------
  [116648.101175] kernfs: can not remove 'used_bytes', no directory
  [116648.101731] WARNING: CPU: 3 PID: 28500 at fs/kernfs/dir.c:1504 kernfs_remove_by_name_ns+0x75/0x80
  (...)
  [116648.105649] CPU: 3 PID: 28500 Comm: umount Tainted: G        W         5.3.0-rc3-btrfs-next-54 #1
  (...)
  [116648.107461] RIP: 0010:kernfs_remove_by_name_ns+0x75/0x80
  (...)
  [116648.109336] RSP: 0018:ffffabfd0090bd08 EFLAGS: 00010282
  [116648.109979] RAX: 0000000000000000 RBX: ffffffffc0c119a0 RCX: 0000000000000000
  [116648.110625] RDX: ffff9fff603a7a00 RSI: ffff9fff603978a8 RDI: ffff9fff603978a8
  [116648.111283] RBP: ffffffffc0b9ca41 R08: 0000000000000000 R09: 0000000000000001
  [116648.111940] R10: ffff9ffe1f72e1c0 R11: 0000000000000000 R12: ffffffffc0b94120
  [116648.112603] R13: ffffffffb3d9b4e0 R14: 0000000000000000 R15: dead000000000100
  [116648.113268] FS:  00007f9cdc78a2c0(0000) GS:ffff9fff60380000(0000) knlGS:0000000000000000
  [116648.113939] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [116648.114607] CR2: 00007f9fc4747ab4 CR3: 00000005c7832003 CR4: 00000000003606e0
  [116648.115286] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [116648.115966] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [116648.116649] Call Trace:
  [116648.117326]  remove_files+0x31/0x70
  [116648.117997]  sysfs_remove_group+0x38/0x80
  [116648.118671]  sysfs_remove_groups+0x34/0x70
  [116648.119342]  kobject_del+0x20/0x60
  [116648.120022]  btrfs_free_block_groups+0x405/0x430 [btrfs]
  [116648.120707]  close_ctree+0x19a/0x380 [btrfs]
  [116648.121396]  generic_shutdown_super+0x6c/0x110
  [116648.122057]  kill_anon_super+0xe/0x30
  [116648.122702]  btrfs_kill_super+0x12/0xa0 [btrfs]
  [116648.123335]  deactivate_locked_super+0x3a/0x70
  [116648.123961]  cleanup_mnt+0xb4/0x160
  [116648.124586]  task_work_run+0x7e/0xc0
  [116648.125210]  exit_to_usermode_loop+0xfa/0x100
  [116648.125830]  do_syscall_64+0x1cb/0x220
  [116648.126463]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [116648.127080] RIP: 0033:0x7f9cdc073b37
  (...)
  [116648.135923] ---[ end trace 22e24db328ccadf9 ]---

These happen because, during the unmount path, we call kobject_del() for
raid kobjects that are not fully initialized, meaning that we set their
ktype (as btrfs_raid_ktype) through link_block_group() but we didn't set
their parent kobject, which is done through btrfs_add_raid_kobjects().

We have this split raid kobject setup since commit 75cb379d263521
("btrfs: defer adding raid type kobject until after chunk relocation") in
order to avoid triggering reclaim during contextes where we can not
(either we are holding a transaction handle or some lock required by
the transaction commit path), so that we do the calls to kobject_add(),
which triggers GFP_KERNEL allocations, through btrfs_add_raid_kobjects()
in contextes where it is safe to trigger reclaim. That change expected
that a new raid kobject can only be created either when mounting the
filesystem or after raid profile conversion through the relocation path.
However, we can have new raid kobject created in other two cases at least:

1) During device replace (or scrub) after adding a device a to the
   filesystem. The replace procedure (and scrub) do calls to
   btrfs_inc_block_group_ro() which can allocate a new block group
   with a new raid profile (because we now have more devices). This
   can be triggered by test cases btrfs/027 and btrfs/176.

2) During a degraded mount trough any write path. This can be triggered
   by test case btrfs/124.

Fixing this by adding extra calls to btrfs_add_raid_kobjects(), not only
makes things more complex and fragile, can also introduce deadlocks with
reclaim the following way:

1) Calling btrfs_add_raid_kobjects() at btrfs_inc_block_group_ro() or
   anywhere in the replace/scrub path will cause a deadlock with reclaim
   because if reclaim happens and a transaction commit is triggered,
   the transaction commit path will block at btrfs_scrub_pause().

2) During degraded mounts it is essentially impossible to figure out where
   to add extra calls to btrfs_add_raid_kobjects(), because allocation of
   a block group with a new raid profile can happen anywhere, which means
   we can't safely figure out which contextes are safe for reclaim, as
   we can either hold a transaction handle or some lock needed by the
   transaction commit path.

So it is too complex and error prone to have this split setup of raid
kobjects. So fix the issue by consolidating the setup of the kobjects in a
single place, at link_block_group(), and setup a nofs context there in
order to prevent reclaim being triggered by the memory allocations done
through the call chain of kobject_add().

Besides fixing the sysfs warnings during kobject_del(), this also ensures
the sysfs directories for the new raid profiles end up created and visible
to users (a bug that existed before the 5.3 commit 7c7e301406d0a9
("btrfs: sysfs: Replace default_attrs in ktypes with groups")).

Fixes: 75cb379d263521 ("btrfs: defer adding raid type kobject until after chunk relocation")
Fixes: 7c7e301406d0a9 ("btrfs: sysfs: Replace default_attrs in ktypes with groups")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agoBtrfs: fix deadlock between fiemap and transaction commits
Filipe Manana [Mon, 29 Jul 2019 08:37:10 +0000 (09:37 +0100)]
Btrfs: fix deadlock between fiemap and transaction commits

The fiemap handler locks a file range that can have unflushed delalloc,
and after locking the range, it tries to attach to a running transaction.
If the running transaction started its commit, that is, it is in state
TRANS_STATE_COMMIT_START, and either the filesystem was mounted with the
flushoncommit option or the transaction is creating a snapshot for the
subvolume that contains the file that fiemap is operating on, we end up
deadlocking. This happens because fiemap is blocked on the transaction,
waiting for it to complete, and the transaction is waiting for the flushed
dealloc to complete, which requires locking the file range that the fiemap
task already locked. The following stack traces serve as an example of
when this deadlock happens:

  (...)
  [404571.515510] Workqueue: btrfs-endio-write btrfs_endio_write_helper [btrfs]
  [404571.515956] Call Trace:
  [404571.516360]  ? __schedule+0x3ae/0x7b0
  [404571.516730]  schedule+0x3a/0xb0
  [404571.517104]  lock_extent_bits+0x1ec/0x2a0 [btrfs]
  [404571.517465]  ? remove_wait_queue+0x60/0x60
  [404571.517832]  btrfs_finish_ordered_io+0x292/0x800 [btrfs]
  [404571.518202]  normal_work_helper+0xea/0x530 [btrfs]
  [404571.518566]  process_one_work+0x21e/0x5c0
  [404571.518990]  worker_thread+0x4f/0x3b0
  [404571.519413]  ? process_one_work+0x5c0/0x5c0
  [404571.519829]  kthread+0x103/0x140
  [404571.520191]  ? kthread_create_worker_on_cpu+0x70/0x70
  [404571.520565]  ret_from_fork+0x3a/0x50
  [404571.520915] kworker/u8:6    D    0 31651      2 0x80004000
  [404571.521290] Workqueue: btrfs-flush_delalloc btrfs_flush_delalloc_helper [btrfs]
  (...)
  [404571.537000] fsstress        D    0 13117  13115 0x00004000
  [404571.537263] Call Trace:
  [404571.537524]  ? __schedule+0x3ae/0x7b0
  [404571.537788]  schedule+0x3a/0xb0
  [404571.538066]  wait_current_trans+0xc8/0x100 [btrfs]
  [404571.538349]  ? remove_wait_queue+0x60/0x60
  [404571.538680]  start_transaction+0x33c/0x500 [btrfs]
  [404571.539076]  btrfs_check_shared+0xa3/0x1f0 [btrfs]
  [404571.539513]  ? extent_fiemap+0x2ce/0x650 [btrfs]
  [404571.539866]  extent_fiemap+0x2ce/0x650 [btrfs]
  [404571.540170]  do_vfs_ioctl+0x526/0x6f0
  [404571.540436]  ksys_ioctl+0x70/0x80
  [404571.540734]  __x64_sys_ioctl+0x16/0x20
  [404571.540997]  do_syscall_64+0x60/0x1d0
  [404571.541279]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  (...)
  [404571.543729] btrfs           D    0 14210  14208 0x00004000
  [404571.544023] Call Trace:
  [404571.544275]  ? __schedule+0x3ae/0x7b0
  [404571.544526]  ? wait_for_completion+0x112/0x1a0
  [404571.544795]  schedule+0x3a/0xb0
  [404571.545064]  schedule_timeout+0x1ff/0x390
  [404571.545351]  ? lock_acquire+0xa6/0x190
  [404571.545638]  ? wait_for_completion+0x49/0x1a0
  [404571.545890]  ? wait_for_completion+0x112/0x1a0
  [404571.546228]  wait_for_completion+0x131/0x1a0
  [404571.546503]  ? wake_up_q+0x70/0x70
  [404571.546775]  btrfs_wait_ordered_extents+0x27c/0x400 [btrfs]
  [404571.547159]  btrfs_commit_transaction+0x3b0/0xae0 [btrfs]
  [404571.547449]  ? btrfs_mksubvol+0x4a4/0x640 [btrfs]
  [404571.547703]  ? remove_wait_queue+0x60/0x60
  [404571.547969]  btrfs_mksubvol+0x605/0x640 [btrfs]
  [404571.548226]  ? __sb_start_write+0xd4/0x1c0
  [404571.548512]  ? mnt_want_write_file+0x24/0x50
  [404571.548789]  btrfs_ioctl_snap_create_transid+0x169/0x1a0 [btrfs]
  [404571.549048]  btrfs_ioctl_snap_create_v2+0x11d/0x170 [btrfs]
  [404571.549307]  btrfs_ioctl+0x133f/0x3150 [btrfs]
  [404571.549549]  ? mem_cgroup_charge_statistics+0x4c/0xd0
  [404571.549792]  ? mem_cgroup_commit_charge+0x84/0x4b0
  [404571.550064]  ? __handle_mm_fault+0xe3e/0x11f0
  [404571.550306]  ? do_raw_spin_unlock+0x49/0xc0
  [404571.550608]  ? _raw_spin_unlock+0x24/0x30
  [404571.550976]  ? __handle_mm_fault+0xedf/0x11f0
  [404571.551319]  ? do_vfs_ioctl+0xa2/0x6f0
  [404571.551659]  ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
  [404571.552087]  do_vfs_ioctl+0xa2/0x6f0
  [404571.552355]  ksys_ioctl+0x70/0x80
  [404571.552621]  __x64_sys_ioctl+0x16/0x20
  [404571.552864]  do_syscall_64+0x60/0x1d0
  [404571.553104]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  (...)

If we were joining the transaction instead of attaching to it, we would
not risk a deadlock because a join only blocks if the transaction is in a
state greater then or equals to TRANS_STATE_COMMIT_DOING, and the delalloc
flush performed by a transaction is done before it reaches that state,
when it is in the state TRANS_STATE_COMMIT_START. However a transaction
join is intended for use cases where we do modify the filesystem, and
fiemap only needs to peek at delayed references from the current
transaction in order to determine if extents are shared, and, besides
that, when there is no current transaction or when it blocks to wait for
a current committing transaction to complete, it creates a new transaction
without reserving any space. Such unnecessary transactions, besides doing
unnecessary IO, can cause transaction aborts (-ENOSPC) and unnecessary
rotation of the precious backup roots.

So fix this by adding a new transaction join variant, named join_nostart,
which behaves like the regular join, but it does not create a transaction
when none currently exists or after waiting for a committing transaction
to complete.

Fixes: 03628cdbc64db6 ("Btrfs: do not start a transaction during fiemap")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agoBtrfs: fix race leading to fs corruption after transaction abort
Filipe Manana [Thu, 25 Jul 2019 10:27:04 +0000 (11:27 +0100)]
Btrfs: fix race leading to fs corruption after transaction abort

When one transaction is finishing its commit, it is possible for another
transaction to start and enter its initial commit phase as well. If the
first ends up getting aborted, we have a small time window where the second
transaction commit does not notice that the previous transaction aborted
and ends up committing, writing a superblock that points to btrees that
reference extent buffers (nodes and leafs) that were not persisted to disk.
The consequence is that after mounting the filesystem again, we will be
unable to load some btree nodes/leafs, either because the content on disk
is either garbage (or just zeroes) or corresponds to the old content of a
previouly COWed or deleted node/leaf, resulting in the well known error
messages "parent transid verify failed on ...".
The following sequence diagram illustrates how this can happen.

        CPU 1                                           CPU 2

 <at transaction N>

 btrfs_commit_transaction()
   (...)
   --> sets transaction state to
       TRANS_STATE_UNBLOCKED
   --> sets fs_info->running_transaction
       to NULL

                                                    (...)
                                                    btrfs_start_transaction()
                                                      start_transaction()
                                                        wait_current_trans()
                                                          --> returns immediately
                                                              because
                                                              fs_info->running_transaction
                                                              is NULL
                                                        join_transaction()
                                                          --> creates transaction N + 1
                                                          --> sets
                                                              fs_info->running_transaction
                                                              to transaction N + 1
                                                          --> adds transaction N + 1 to
                                                              the fs_info->trans_list list
                                                        --> returns transaction handle
                                                            pointing to the new
                                                            transaction N + 1
                                                    (...)

                                                    btrfs_sync_file()
                                                      btrfs_start_transaction()
                                                        --> returns handle to
                                                            transaction N + 1
                                                      (...)

   btrfs_write_and_wait_transaction()
     --> writeback of some extent
         buffer fails, returns an
 error
   btrfs_handle_fs_error()
     --> sets BTRFS_FS_STATE_ERROR in
         fs_info->fs_state
   --> jumps to label "scrub_continue"
   cleanup_transaction()
     btrfs_abort_transaction(N)
       --> sets BTRFS_FS_STATE_TRANS_ABORTED
           flag in fs_info->fs_state
       --> sets aborted field in the
           transaction and transaction
   handle structures, for
           transaction N only
     --> removes transaction from the
         list fs_info->trans_list
                                                      btrfs_commit_transaction(N + 1)
                                                        --> transaction N + 1 was not
    aborted, so it proceeds
                                                        (...)
                                                        --> sets the transaction's state
                                                            to TRANS_STATE_COMMIT_START
                                                        --> does not find the previous
                                                            transaction (N) in the
                                                            fs_info->trans_list, so it
                                                            doesn't know that transaction
                                                            was aborted, and the commit
                                                            of transaction N + 1 proceeds
                                                        (...)
                                                        --> sets transaction N + 1 state
                                                            to TRANS_STATE_UNBLOCKED
                                                        btrfs_write_and_wait_transaction()
                                                          --> succeeds writing all extent
                                                              buffers created in the
                                                              transaction N + 1
                                                        write_all_supers()
                                                           --> succeeds
                                                           --> we now have a superblock on
                                                               disk that points to trees
                                                               that refer to at least one
                                                               extent buffer that was
                                                               never persisted

So fix this by updating the transaction commit path to check if the flag
BTRFS_FS_STATE_TRANS_ABORTED is set on fs_info->fs_state if after setting
the transaction to the TRANS_STATE_COMMIT_START we do not find any previous
transaction in the fs_info->trans_list. If the flag is set, just fail the
transaction commit with -EROFS, as we do in other places. The exact error
code for the previous transaction abort was already logged and reported.

Fixes: 49b25e0540904b ("btrfs: enhance transaction abort infrastructure")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agoBtrfs: fix incremental send failure after deduplication
Filipe Manana [Wed, 17 Jul 2019 12:23:39 +0000 (13:23 +0100)]
Btrfs: fix incremental send failure after deduplication

When doing an incremental send operation we can fail if we previously did
deduplication operations against a file that exists in both snapshots. In
that case we will fail the send operation with -EIO and print a message
to dmesg/syslog like the following:

  BTRFS error (device sdc): Send: inconsistent snapshot, found updated \
  extent for inode 257 without updated inode item, send root is 258, \
  parent root is 257

This requires that we deduplicate to the same file in both snapshots for
the same amount of times on each snapshot. The issue happens because a
deduplication only updates the iversion of an inode and does not update
any other field of the inode, therefore if we deduplicate the file on
each snapshot for the same amount of time, the inode will have the same
iversion value (stored as the "sequence" field on the inode item) on both
snapshots, therefore it will be seen as unchanged between in the send
snapshot while there are new/updated/deleted extent items when comparing
to the parent snapshot. This makes the send operation return -EIO and
print an error message.

Example reproducer:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  # Create our first file. The first half of the file has several 64Kb
  # extents while the second half as a single 512Kb extent.
  $ xfs_io -f -s -c "pwrite -S 0xb8 -b 64K 0 512K" /mnt/foo
  $ xfs_io -c "pwrite -S 0xb8 512K 512K" /mnt/foo

  # Create the base snapshot and the parent send stream from it.
  $ btrfs subvolume snapshot -r /mnt /mnt/mysnap1
  $ btrfs send -f /tmp/1.snap /mnt/mysnap1

  # Create our second file, that has exactly the same data as the first
  # file.
  $ xfs_io -f -c "pwrite -S 0xb8 0 1M" /mnt/bar

  # Create the second snapshot, used for the incremental send, before
  # doing the file deduplication.
  $ btrfs subvolume snapshot -r /mnt /mnt/mysnap2

  # Now before creating the incremental send stream:
  #
  # 1) Deduplicate into a subrange of file foo in snapshot mysnap1. This
  #    will drop several extent items and add a new one, also updating
  #    the inode's iversion (sequence field in inode item) by 1, but not
  #    any other field of the inode;
  #
  # 2) Deduplicate into a different subrange of file foo in snapshot
  #    mysnap2. This will replace an extent item with a new one, also
  #    updating the inode's iversion by 1 but not any other field of the
  #    inode.
  #
  # After these two deduplication operations, the inode items, for file
  # foo, are identical in both snapshots, but we have different extent
  # items for this inode in both snapshots. We want to check this doesn't
  # cause send to fail with an error or produce an incorrect stream.

  $ xfs_io -r -c "dedupe /mnt/bar 0 0 512K" /mnt/mysnap1/foo
  $ xfs_io -r -c "dedupe /mnt/bar 512K 512K 512K" /mnt/mysnap2/foo

  # Create the incremental send stream.
  $ btrfs send -p /mnt/mysnap1 -f /tmp/2.snap /mnt/mysnap2
  ERROR: send ioctl failed with -5: Input/output error

This issue started happening back in 2015 when deduplication was updated
to not update the inode's ctime and mtime and update only the iversion.
Back then we would hit a BUG_ON() in send, but later in 2016 send was
updated to return -EIO and print the error message instead of doing the
BUG_ON().

A test case for fstests follows soon.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203933
Fixes: 1c919a5e13702c ("btrfs: don't update mtime/ctime on deduped inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agobtrfs: fix extent_state leak in btrfs_lock_and_flush_ordered_range
Naohiro Aota [Fri, 26 Jul 2019 07:47:05 +0000 (16:47 +0900)]
btrfs: fix extent_state leak in btrfs_lock_and_flush_ordered_range

btrfs_lock_and_flush_ordered_range() loads given "*cached_state" into
cachedp, which, in general, is NULL. Then, lock_extent_bits() updates
"cachedp", but it never goes backs to the caller. Thus the caller still
see its "cached_state" to be NULL and never free the state allocated
under btrfs_lock_and_flush_ordered_range(). As a result, we will
see massive state leak with e.g. fstests btrfs/005. Fix this bug by
properly handling the pointers.

Fixes: bd80d94efb83 ("btrfs: Always use a cached extent_state in btrfs_lock_and_flush_ordered_range")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agobtrfs: Fix deadlock caused by missing memory barrier
Nikolay Borisov [Thu, 25 Jul 2019 08:27:29 +0000 (11:27 +0300)]
btrfs: Fix deadlock caused by missing memory barrier

Commit 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from
atomic to int") changed the type of blocking_writers but forgot to
adjust relevant code in btrfs_tree_unlock by converting the
smp_mb__after_atomic to smp_mb.  This opened up the possibility of a
deadlock due to re-ordering of setting blocking_writers and
checking/waking up the waiter. This particular lockup is explained in a
comment above waitqueue_active() function.

Fix it by converting the memory barrier to a full smp_mb, accounting
for the fact that blocking_writers is a simple integer.

Fixes: 06297d8cefca ("btrfs: switch extent_buffer blocking_writers from atomic to int")
Tested-by: Johannes Thumshirn <jthumshirn@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agobtrfs: don't leak extent_map in btrfs_get_io_geometry()
Johannes Thumshirn [Mon, 15 Jul 2019 13:16:12 +0000 (15:16 +0200)]
btrfs: don't leak extent_map in btrfs_get_io_geometry()

btrfs_get_io_geometry() calls btrfs_get_chunk_map() to acquire a reference
on a extent_map, but on normal operation it does not drop this reference
anymore.

This leads to excessive kmemleak reports.

Always call free_extent_map(), not just in the error case.

Fixes: 5f1411265e16 ("btrfs: Introduce btrfs_io_geometry infrastructure")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agobtrfs: free checksum hash on in close_ctree
Johannes Thumshirn [Thu, 11 Jul 2019 15:23:04 +0000 (17:23 +0200)]
btrfs: free checksum hash on in close_ctree

fs_info::csum_hash gets initialized in btrfs_init_csum_hash() which is
called by open_ctree().

But it only gets freed if open_ctree() fails, not on normal operation.

This leads to a memory leak like the following found by kmemleak:
unreferenced object 0xffff888132cb8720 (size 96):

  comm "mount", pid 450, jiffies 4294912436 (age 17.584s)
  hex dump (first 32 bytes):
    04 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<000000000c9643d4>] crypto_create_tfm+0x2d/0xd0
    [<00000000ae577f68>] crypto_alloc_tfm+0x4b/0xb0
    [<000000002b5cdf30>] open_ctree+0xb84/0x2060 [btrfs]
    [<0000000043204297>] btrfs_mount_root+0x552/0x640 [btrfs]
    [<00000000c99b10ea>] legacy_get_tree+0x22/0x40
    [<0000000071a6495f>] vfs_get_tree+0x1f/0xc0
    [<00000000f180080e>] fc_mount+0x9/0x30
    [<000000009e36cebd>] vfs_kern_mount.part.11+0x6a/0x80
    [<0000000004594c05>] btrfs_mount+0x174/0x910 [btrfs]
    [<00000000c99b10ea>] legacy_get_tree+0x22/0x40
    [<0000000071a6495f>] vfs_get_tree+0x1f/0xc0
    [<00000000b86e92c5>] do_mount+0x6b0/0x940
    [<0000000097464494>] ksys_mount+0x7b/0xd0
    [<0000000057213c80>] __x64_sys_mount+0x1c/0x20
    [<00000000cb689b5e>] do_syscall_64+0x43/0x130
    [<000000002194e289>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Free fs_info::csum_hash in close_ctree() to avoid the memory leak.

Fixes: 6d97c6e31b55 ("btrfs: add boilerplate code for directly including the crypto framework")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agobtrfs: Fix build error while LIBCRC32C is module
YueHaibing [Tue, 2 Jul 2019 14:39:03 +0000 (22:39 +0800)]
btrfs: Fix build error while LIBCRC32C is module

If CONFIG_BTRFS_FS is y and CONFIG_LIBCRC32C is m,
building fails:

  fs/btrfs/super.o: In function `btrfs_mount_root':
  super.c:(.text+0xb7f9): undefined reference to `crc32c_impl'
  fs/btrfs/super.o: In function `init_btrfs_fs':
  super.c:(.init.text+0x3465): undefined reference to `crc32c_impl'
  fs/btrfs/extent-tree.o: In function `hash_extent_data_ref':
  extent-tree.c:(.text+0xe60): undefined reference to `crc32c'
  extent-tree.c:(.text+0xe78): undefined reference to `crc32c'
  extent-tree.c:(.text+0xe8b): undefined reference to `crc32c'
  fs/btrfs/dir-item.o: In function `btrfs_insert_xattr_item':
  dir-item.c:(.text+0x291): undefined reference to `crc32c'
  fs/btrfs/dir-item.o: In function `btrfs_insert_dir_item':
  dir-item.c:(.text+0x429): undefined reference to `crc32c'

Select LIBCRC32C to fix it.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d5178578bcd4 ("btrfs: directly call into crypto framework for checksumming")
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
12 months agobtrfs: inode: Don't compress if NODATASUM or NODATACOW set
Qu Wenruo [Mon, 1 Jul 2019 05:12:46 +0000 (05:12 +0000)]
btrfs: inode: Don't compress if NODATASUM or NODATACOW set

As btrfs(5) specified:

Note
If nodatacow or nodatasum are enabled, compression is disabled.

If NODATASUM or NODATACOW set, we should not compress the extent.

Normally NODATACOW is detected properly in run_delalloc_range() so
compression won't happen for NODATACOW.

However for NODATASUM we don't have any check, and it can cause
compressed extent without csum pretty easily, just by:
  mkfs.btrfs -f $dev
  mount $dev $mnt -o nodatasum
  touch $mnt/foobar
  mount -o remount,datasum,compress $mnt
  xfs_io -f -c "pwrite 0 128K" $mnt/foobar

And in fact, we have a bug report about corrupted compressed extent
without proper data checksum so even RAID1 can't recover the corruption.
(https://bugzilla.kernel.org/show_bug.cgi?id=199707)

Running compression without proper checksum could cause more damage when
corruption happens, as compressed data could make the whole extent
unreadable, so there is no need to allow compression for
NODATACSUM.

The fix will refactor the inode compression check into two parts:

- inode_can_compress()
  As the hard requirement, checked at btrfs_run_delalloc_range(), so no
  compression will happen for NODATASUM inode at all.

- inode_need_compress()
  As the soft requirement, checked at btrfs_run_delalloc_range() and
  compress_file_range().

Reported-by: James Harvey <jamespharvey20@gmail.com>
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: fix memory leak of path on error return path
Colin Ian King [Fri, 5 Jul 2019 07:26:24 +0000 (08:26 +0100)]
btrfs: fix memory leak of path on error return path

Currently if the allocation of roots or tmp_ulist fails the error handling
does not free up the allocation of path causing a memory leak. Fix this and
other similar leaks by moving the call of btrfs_free_path from label out
to label out_free_ulist.

Kudos to David Sterba for spotting the issue in my original fix and suggesting
the correct way to fix the leak and Anand Jain for spotting a double free
issue.

Addresses-Coverity: ("Resource leak")
Fixes: 5911c8fe05c5 ("btrfs: fiemap: preallocate ulists for btrfs_check_shared")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: move the subvolume reservation stuff out of extent-tree.c
Josef Bacik [Wed, 19 Jun 2019 19:12:01 +0000 (15:12 -0400)]
btrfs: move the subvolume reservation stuff out of extent-tree.c

This is just two functions, put it in root-tree.c since it involves root
items.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: migrate the delalloc space stuff to it's own home
Josef Bacik [Wed, 19 Jun 2019 19:12:00 +0000 (15:12 -0400)]
btrfs: migrate the delalloc space stuff to it's own home

We have code for data and metadata reservations for delalloc.  There's
quite a bit of code here, and it's used in a lot of places so I've
separated it out to it's own file.  inode.c and file.c are already
pretty large, and this code is complicated enough to live in its own
space.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: migrate btrfs_trans_release_chunk_metadata
Josef Bacik [Wed, 19 Jun 2019 19:11:59 +0000 (15:11 -0400)]
btrfs: migrate btrfs_trans_release_chunk_metadata

Move this into transaction.c with the rest of the transaction related
code.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: migrate the delayed refs rsv code
Josef Bacik [Wed, 19 Jun 2019 19:11:58 +0000 (15:11 -0400)]
btrfs: migrate the delayed refs rsv code

These belong with the delayed refs related code, not in extent-tree.c.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Evaluate io_tree in find_lock_delalloc_range()
Goldwyn Rodrigues [Fri, 21 Jun 2019 15:02:54 +0000 (10:02 -0500)]
btrfs: Evaluate io_tree in find_lock_delalloc_range()

Simplification.  No point passing the tree variable when it can be
evaluated from inode. The tests now use the io_tree from btrfs_inode as
opposed to creating one.

Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: migrate the global_block_rsv helpers to block-rsv.c
Josef Bacik [Wed, 19 Jun 2019 17:47:23 +0000 (13:47 -0400)]
btrfs: migrate the global_block_rsv helpers to block-rsv.c

These helpers belong in block-rsv.c

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: migrate the block-rsv code to block-rsv.c
Josef Bacik [Wed, 19 Jun 2019 17:47:22 +0000 (13:47 -0400)]
btrfs: migrate the block-rsv code to block-rsv.c

This moves everything out of extent-tree.c to block-rsv.c.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: stop using block_rsv_release_bytes everywhere
Josef Bacik [Wed, 19 Jun 2019 17:47:21 +0000 (13:47 -0400)]
btrfs: stop using block_rsv_release_bytes everywhere

block_rsv_release_bytes() is the internal to the block_rsv code, and
shouldn't be called directly by anything else.  Switch all users to the
exported helpers.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: cleanup the target logic in __btrfs_block_rsv_release
Josef Bacik [Wed, 19 Jun 2019 17:47:20 +0000 (13:47 -0400)]
btrfs: cleanup the target logic in __btrfs_block_rsv_release

This works for all callers already, but if we wanted to use the helper
for the global_block_rsv it would end up trying to refill itself.  Fix
the logic to be able to be used no matter which block rsv is passed in
to this helper.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: export __btrfs_block_rsv_release
Josef Bacik [Wed, 19 Jun 2019 17:47:19 +0000 (13:47 -0400)]
btrfs: export __btrfs_block_rsv_release

The delalloc reserve stuff calls this directly because it cares about
the qgroup accounting stuff, so export it so we can move it around.  Fix
btrfs_block_rsv_release() to just be a static inline since it just calls
__btrfs_block_rsv_release() with NULL for the qgroup stuff.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: export btrfs_block_rsv_add_bytes
Josef Bacik [Wed, 19 Jun 2019 17:47:18 +0000 (13:47 -0400)]
btrfs: export btrfs_block_rsv_add_bytes

This is used in a few places, we need to make sure it's exported so we
can move it around.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: move btrfs_block_rsv definitions into it's own header
Josef Bacik [Wed, 19 Jun 2019 17:47:17 +0000 (13:47 -0400)]
btrfs: move btrfs_block_rsv definitions into it's own header

Prep work for separating out all of the block_rsv related code into its
own file.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Simplify update of space_info in __reserve_metadata_bytes()
Goldwyn Rodrigues [Tue, 25 Jun 2019 18:11:31 +0000 (20:11 +0200)]
btrfs: Simplify update of space_info in __reserve_metadata_bytes()

We don't need an if-else-if chain where we can use a simple OR since
both conditions are performing the same action. The short-circuit for OR
will ensure that if the first condition is true, can_overcommit() is not
called.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: unexport can_overcommit
Josef Bacik [Tue, 18 Jun 2019 20:09:26 +0000 (16:09 -0400)]
btrfs: unexport can_overcommit

Now that we've moved all of the users to space-info.c, unexport it and
name it back to can_overcommit.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: move reserve_metadata_bytes and supporting code to space-info.c
Josef Bacik [Tue, 18 Jun 2019 20:09:25 +0000 (16:09 -0400)]
btrfs: move reserve_metadata_bytes and supporting code to space-info.c

This moves all of the metadata reservation code into space-info.c.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: move dump_space_info to space-info.c
Josef Bacik [Tue, 18 Jun 2019 20:09:24 +0000 (16:09 -0400)]
btrfs: move dump_space_info to space-info.c

We'll need this exported so we can use it in all the various was we need
to use it.  This is prep work to move reserve_metadata_bytes.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: export block_rsv_use_bytes
Josef Bacik [Tue, 18 Jun 2019 20:09:23 +0000 (16:09 -0400)]
btrfs: export block_rsv_use_bytes

We are going to need this to move the metadata reservation stuff to
space_info.c.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: move btrfs_space_info_add_*_bytes to space-info.c
Josef Bacik [Tue, 18 Jun 2019 20:09:22 +0000 (16:09 -0400)]
btrfs: move btrfs_space_info_add_*_bytes to space-info.c

Now that we've moved all the pre-requisite stuff, move these two
functions.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: move the space info update macro to space-info.h
Josef Bacik [Tue, 18 Jun 2019 20:09:21 +0000 (16:09 -0400)]
btrfs: move the space info update macro to space-info.h

Also rename it to btrfs_space_info_update_* so it's clear what we're
updating.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: move and export can_overcommit
Josef Bacik [Tue, 18 Jun 2019 20:09:20 +0000 (16:09 -0400)]
btrfs: move and export can_overcommit

This is the first piece of moving the space reservation code to
space-info.c

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: move the space_info handling code to space-info.c
Josef Bacik [Tue, 18 Jun 2019 20:09:19 +0000 (16:09 -0400)]
btrfs: move the space_info handling code to space-info.c

These are the basic init and lookup functions and some helper functions,
fairly straightforward before the bad stuff starts.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: export space_info_add_*_bytes
Josef Bacik [Tue, 18 Jun 2019 20:09:18 +0000 (16:09 -0400)]
btrfs: export space_info_add_*_bytes

Prep work for consolidating all of the space_info code into one file.
We need to export these so multiple files can use them.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: rename do_chunk_alloc to btrfs_chunk_alloc
Josef Bacik [Tue, 18 Jun 2019 20:09:17 +0000 (16:09 -0400)]
btrfs: rename do_chunk_alloc to btrfs_chunk_alloc

Really we just need the enum, but as we break more things up it'll help
to have this external to extent-tree.c.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: move space_info to space-info.h
Josef Bacik [Tue, 18 Jun 2019 20:09:16 +0000 (16:09 -0400)]
btrfs: move space_info to space-info.h

Migrate the struct definition and the one helper that's in ctree.h into
space-info.h

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: lift bio_set_dev from bio allocation helpers
David Sterba [Tue, 18 Jun 2019 18:00:16 +0000 (20:00 +0200)]
btrfs: lift bio_set_dev from bio allocation helpers

The block device is passed around for the only purpose to set it in new
bios. Move the assignment one level up. This is a preparatory patch for
further bdev cleanups.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use raid_attr for minimum stripe count in btrfs_calc_avail_data_space
David Sterba [Tue, 18 Jun 2019 18:00:13 +0000 (20:00 +0200)]
btrfs: use raid_attr for minimum stripe count in btrfs_calc_avail_data_space

Minimum stripe count matches the minimum devices required for a given
profile. The open coded assignments match the raid_attr table.

What's changed here is the meaning for RAID5/6. Previously their
min_stripes would be 1, while newly it's devs_min. This however shold be
the same as before because it's not possible to create filesystem on
fewer devices than the raid_attr table allows.

There's no adjustment regarding the parity stripes (like
calc_data_stripes does), because we're interested in overall space that
would fit on the devices.

Missing devices make no difference for the whole calculation, we have
the size stored in the structures.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use raid_attr to adjust minimal stripe size in btrfs_calc_avail_data_space
David Sterba [Tue, 18 Jun 2019 18:00:11 +0000 (20:00 +0200)]
btrfs: use raid_attr to adjust minimal stripe size in btrfs_calc_avail_data_space

Special case for DUP can be replaced by lookup to the attribute table,
where the dev_stripes is the right coefficient.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: drop default value assignments in enums
David Sterba [Tue, 18 Jun 2019 18:00:08 +0000 (20:00 +0200)]
btrfs: drop default value assignments in enums

A few more instances whre we don't need to specify the values as long as
they are the same that enum assigns automatically. All of the enums are
in-memory only and nothing relies on the exact values.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use common helpers for extent IO state insertion messages
David Sterba [Tue, 18 Jun 2019 18:00:05 +0000 (20:00 +0200)]
btrfs: use common helpers for extent IO state insertion messages

Print the error messages using the helpers that also print the
filesystem identification.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: run delayed iput at unlink time
Josef Bacik [Tue, 18 Jun 2019 14:59:18 +0000 (10:59 -0400)]
btrfs: run delayed iput at unlink time

We have been seeing issues in production where a cleaner script will end
up unlinking a bunch of files that have pending iputs.  This means they
will get their final iput's run at btrfs-cleaner time and thus are not
throttled, which impacts the workload.

Since we are unlinking these files we can just drop the delayed iput at
unlink time.  We are already holding a reference to the inode so this
will not be the final iput and thus is completely safe to do at this
point.  Doing this means we are more likely to be doing the final iput
at unlink time, and thus will get the IO charged to the caller and get
throttled appropriately without affecting the main workload.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agoBtrfs: add missing inode version, ctime and mtime updates when punching hole
Filipe Manana [Wed, 19 Jun 2019 12:05:50 +0000 (13:05 +0100)]
Btrfs: add missing inode version, ctime and mtime updates when punching hole

If the range for which we are punching a hole covers only part of a page,
we end up updating the inode item but we skip the update of the inode's
iversion, mtime and ctime. Fix that by ensuring we update those properties
of the inode.

A patch for fstests test case generic/059 that tests this as been sent
along with this fix.

Fixes: 2aaa66558172b0 ("Btrfs: add hole punching")
Fixes: e8c1c76e804b18 ("Btrfs: add missing inode update when punching hole")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agoBtrfs: fix fsync not persisting dentry deletions due to inode evictions
Filipe Manana [Wed, 19 Jun 2019 12:05:39 +0000 (13:05 +0100)]
Btrfs: fix fsync not persisting dentry deletions due to inode evictions

In order to avoid searches on a log tree when unlinking an inode, we check
if the inode being unlinked was logged in the current transaction, as well
as the inode of its parent directory. When any of the inodes are logged,
we proceed to delete directory items and inode reference items from the
log, to ensure that if a subsequent fsync of only the inode being unlinked
or only of the parent directory when the other is not fsync'ed as well,
does not result in the entry still existing after a power failure.

That check however is not reliable when one of the inodes involved (the
one being unlinked or its parent directory's inode) is evicted, since the
logged_trans field is transient, that is, it is not stored on disk, so it
is lost when the inode is evicted and loaded into memory again (which is
set to zero on load). As a consequence the checks currently being done by
btrfs_del_dir_entries_in_log() and btrfs_del_inode_ref_in_log() always
return true if the inode was evicted before, regardless of the inode
having been logged or not before (and in the current transaction), this
results in the dentry being unlinked still existing after a log replay
if after the unlink operation only one of the inodes involved is fsync'ed.

Example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ mkdir /mnt/dir
  $ touch /mnt/dir/foo
  $ xfs_io -c fsync /mnt/dir/foo

  # Keep an open file descriptor on our directory while we evict inodes.
  # We just want to evict the file's inode, the directory's inode must not
  # be evicted.
  $ ( cd /mnt/dir; while true; do :; done ) &
  $ pid=$!

  # Wait a bit to give time to background process to chdir to our test
  # directory.
  $ sleep 0.5

  # Trigger eviction of the file's inode.
  $ echo 2 > /proc/sys/vm/drop_caches

  # Unlink our file and fsync the parent directory. After a power failure
  # we don't expect to see the file anymore, since we fsync'ed the parent
  # directory.
  $ rm -f $SCRATCH_MNT/dir/foo
  $ xfs_io -c fsync /mnt/dir

  <power failure>

  $ mount /dev/sdb /mnt
  $ ls /mnt/dir
  foo
  $
   --> file still there, unlink not persisted despite explicit fsync on dir

Fix this by checking if the inode has the full_sync bit set in its runtime
flags as well, since that bit is set everytime an inode is loaded from
disk, or for other less common cases such as after a shrinking truncate
or failure to allocate extent maps for holes, and gets cleared after the
first fsync. Also consider the inode as possibly logged only if it was
last modified in the current transaction (besides having the full_fsync
flag set).

Fixes: 3a5f1d458ad161 ("Btrfs: Optimize btree walking while logging inodes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Use btrfs_get_io_geometry appropriately
Nikolay Borisov [Mon, 3 Jun 2019 09:05:05 +0000 (12:05 +0300)]
btrfs: Use btrfs_get_io_geometry appropriately

Presently btrfs_map_block is used not only to do everything necessary to
map a bio to the underlying allocation profile but it's also used to
identify how much data could be written based on btrfs' stripe logic
without actually submitting anything. This is achieved by passing NULL
for 'bbio_ret' parameter.

This patch refactors all callers that require just the mapping length
by switching them to using btrfs_io_geometry instead of calling
btrfs_map_block with a special NULL value for 'bbio_ret'. No functional
change.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Introduce btrfs_io_geometry infrastructure
Nikolay Borisov [Mon, 3 Jun 2019 09:05:03 +0000 (12:05 +0300)]
btrfs: Introduce btrfs_io_geometry infrastructure

Add a structure that holds various parameters for IO calculations and a
helper that fills the values. This will help further refactoring and
reduction of functions that in some way open-coded the calculations.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: improve messages when updating feature flags
David Sterba [Thu, 13 Jun 2019 15:55:03 +0000 (17:55 +0200)]
btrfs: improve messages when updating feature flags

Currently the messages printed after setting an incompat feature are
cryptis, we can easily make it better as the textual description is
passed to the helpers. Old:

  setting 128 feature flag

updated:

  setting incompat feature flag for RAID56 (0x80)

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: shut up bogus -Wmaybe-uninitialized warning
Arnd Bergmann [Mon, 17 Jun 2019 11:07:28 +0000 (13:07 +0200)]
btrfs: shut up bogus -Wmaybe-uninitialized warning

gcc sometimes can't determine whether a variable has been initialized
when both the initialization and the use are conditional:

fs/btrfs/props.c: In function 'inherit_props':
fs/btrfs/props.c:389:4: error: 'num_bytes' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    btrfs_block_rsv_release(fs_info, trans->block_rsv,

This code is fine. Unfortunately, I cannot think of a good way to
rephrase it in a way that makes gcc understand this, so I add a bogus
initialization the way one should not.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ gcc 8 and 9 don't emit the warning ]
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agoBtrfs: prevent send failures and crashes due to concurrent relocation
Filipe Manana [Mon, 22 Apr 2019 15:44:09 +0000 (16:44 +0100)]
Btrfs: prevent send failures and crashes due to concurrent relocation

Send always operates on read-only trees and always expected that while it
is in progress, nothing changes in those trees. Due to that expectation
and the fact that send is a read-only operation, it operates on commit
roots and does not hold transaction handles. However relocation can COW
nodes and leafs from read-only trees, which can cause unexpected failures
and crashes (hitting BUG_ONs). while send using a node/leaf, it gets
COWed, the transaction used to COW it is committed, a new transaction
starts, the extent previously used for that node/leaf gets allocated,
possibly for another tree, and the respective extent buffer' content
changes while send is still using it. When this happens send normally
fails with EIO being returned to user space and messages like the
following are found in dmesg/syslog:

  [ 3408.699121] BTRFS error (device sdc): parent transid verify failed on 58703872 wanted 250 found 253
  [ 3441.523123] BTRFS error (device sdc): did not find backref in send_root. inode=63211, offset=0, disk_byte=5222825984 found extent=5222825984

Other times, less often, we hit a BUG_ON() because an extent buffer that
send is using used to be a node, and while send is still using it, it
got COWed and got reused as a leaf while send is still using, producing
the following trace:

 [ 3478.466280] ------------[ cut here ]------------
 [ 3478.466282] kernel BUG at fs/btrfs/ctree.c:1806!
 [ 3478.466965] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC PTI
 [ 3478.467635] CPU: 0 PID: 2165 Comm: btrfs Not tainted 5.0.0-btrfs-next-46 #1
 [ 3478.468311] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014
 [ 3478.469681] RIP: 0010:read_node_slot+0x122/0x130 [btrfs]
 (...)
 [ 3478.471758] RSP: 0018:ffffa437826bfaa0 EFLAGS: 00010246
 [ 3478.472457] RAX: ffff961416ed7000 RBX: 000000000000003d RCX: 0000000000000002
 [ 3478.473151] RDX: 000000000000003d RSI: ffff96141e387408 RDI: ffff961599b30000
 [ 3478.473837] RBP: ffffa437826bfb8e R08: 0000000000000001 R09: ffffa437826bfb8e
 [ 3478.474515] R10: ffffa437826bfa70 R11: 0000000000000000 R12: ffff9614385c8708
 [ 3478.475186] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 [ 3478.475840] FS:  00007f8e0e9cc8c0(0000) GS:ffff9615b6a00000(0000) knlGS:0000000000000000
 [ 3478.476489] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 [ 3478.477127] CR2: 00007f98b67a056e CR3: 0000000005df6005 CR4: 00000000003606f0
 [ 3478.477762] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 [ 3478.478385] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 [ 3478.479003] Call Trace:
 [ 3478.479600]  ? do_raw_spin_unlock+0x49/0xc0
 [ 3478.480202]  tree_advance+0x173/0x1d0 [btrfs]
 [ 3478.480810]  btrfs_compare_trees+0x30c/0x690 [btrfs]
 [ 3478.481388]  ? process_extent+0x1280/0x1280 [btrfs]
 [ 3478.481954]  btrfs_ioctl_send+0x1037/0x1270 [btrfs]
 [ 3478.482510]  _btrfs_ioctl_send+0x80/0x110 [btrfs]
 [ 3478.483062]  btrfs_ioctl+0x13fe/0x3120 [btrfs]
 [ 3478.483581]  ? rq_clock_task+0x2e/0x60
 [ 3478.484086]  ? wake_up_new_task+0x1f3/0x370
 [ 3478.484582]  ? do_vfs_ioctl+0xa2/0x6f0
 [ 3478.485075]  ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
 [ 3478.485552]  do_vfs_ioctl+0xa2/0x6f0
 [ 3478.486016]  ? __fget+0x113/0x200
 [ 3478.486467]  ksys_ioctl+0x70/0x80
 [ 3478.486911]  __x64_sys_ioctl+0x16/0x20
 [ 3478.487337]  do_syscall_64+0x60/0x1b0
 [ 3478.487751]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
 [ 3478.488159] RIP: 0033:0x7f8e0d7d4dd7
 (...)
 [ 3478.489349] RSP: 002b:00007ffcf6fb4908 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
 [ 3478.489742] RAX: ffffffffffffffda RBX: 0000000000000105 RCX: 00007f8e0d7d4dd7
 [ 3478.490142] RDX: 00007ffcf6fb4990 RSI: 0000000040489426 RDI: 0000000000000005
 [ 3478.490548] RBP: 0000000000000005 R08: 00007f8e0d6f3700 R09: 00007f8e0d6f3700
 [ 3478.490953] R10: 00007f8e0d6f39d0 R11: 0000000000000202 R12: 0000000000000005
 [ 3478.491343] R13: 00005624e0780020 R14: 0000000000000000 R15: 0000000000000001
 (...)
 [ 3478.493352] ---[ end trace d5f537302be4f8c8 ]---

Another possibility, much less likely to happen, is that send will not
fail but the contents of the stream it produces may not be correct.

To avoid this, do not allow send and relocation (balance) to run in
parallel. In the long term the goal is to allow for both to be able to
run concurrently without any problems, but that will take a significant
effort in development and testing.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: document BTRFS_MAX_MIRRORS
David Sterba [Fri, 31 May 2019 15:22:59 +0000 (17:22 +0200)]
btrfs: document BTRFS_MAX_MIRRORS

The real meaning of that constant is not clear from the context due to
the target device inclusion.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use mask for RAID56 profiles
David Sterba [Fri, 31 May 2019 14:54:26 +0000 (16:54 +0200)]
btrfs: use mask for RAID56 profiles

We don't need to enumerate the profiles, use the mask for consistency.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: add mask for all RAID1 types
David Sterba [Fri, 31 May 2019 13:39:31 +0000 (15:39 +0200)]
btrfs: add mask for all RAID1 types

Preparatory patch for additional RAID1 profiles with more copies. The
mask will contain 3-copy and 4-copy, most of the checks for plain RAID1
work the same for the other profiles.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: qgroup: Don't hold qgroup_ioctl_lock in btrfs_qgroup_inherit()
Qu Wenruo [Thu, 13 Jun 2019 09:31:24 +0000 (17:31 +0800)]
btrfs: qgroup: Don't hold qgroup_ioctl_lock in btrfs_qgroup_inherit()

[BUG]
Lockdep will report the following circular locking dependency:

  WARNING: possible circular locking dependency detected
  5.2.0-rc2-custom #24 Tainted: G           O
  ------------------------------------------------------
  btrfs/8631 is trying to acquire lock:
  000000002536438c (&fs_info->qgroup_ioctl_lock#2){+.+.}, at: btrfs_qgroup_inherit+0x40/0x620 [btrfs]

  but task is already holding lock:
  000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs]

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #2 (&fs_info->tree_log_mutex){+.+.}:
         __mutex_lock+0x76/0x940
         mutex_lock_nested+0x1b/0x20
         btrfs_commit_transaction+0x475/0xa00 [btrfs]
         btrfs_commit_super+0x71/0x80 [btrfs]
         close_ctree+0x2bd/0x320 [btrfs]
         btrfs_put_super+0x15/0x20 [btrfs]
         generic_shutdown_super+0x72/0x110
         kill_anon_super+0x18/0x30
         btrfs_kill_super+0x16/0xa0 [btrfs]
         deactivate_locked_super+0x3a/0x80
         deactivate_super+0x51/0x60
         cleanup_mnt+0x3f/0x80
         __cleanup_mnt+0x12/0x20
         task_work_run+0x94/0xb0
         exit_to_usermode_loop+0xd8/0xe0
         do_syscall_64+0x210/0x240
         entry_SYSCALL_64_after_hwframe+0x49/0xbe

  -> #1 (&fs_info->reloc_mutex){+.+.}:
         __mutex_lock+0x76/0x940
         mutex_lock_nested+0x1b/0x20
         btrfs_commit_transaction+0x40d/0xa00 [btrfs]
         btrfs_quota_enable+0x2da/0x730 [btrfs]
         btrfs_ioctl+0x2691/0x2b40 [btrfs]
         do_vfs_ioctl+0xa9/0x6d0
         ksys_ioctl+0x67/0x90
         __x64_sys_ioctl+0x1a/0x20
         do_syscall_64+0x65/0x240
         entry_SYSCALL_64_after_hwframe+0x49/0xbe

  -> #0 (&fs_info->qgroup_ioctl_lock#2){+.+.}:
         lock_acquire+0xa7/0x190
         __mutex_lock+0x76/0x940
         mutex_lock_nested+0x1b/0x20
         btrfs_qgroup_inherit+0x40/0x620 [btrfs]
         create_pending_snapshot+0x9d7/0xe60 [btrfs]
         create_pending_snapshots+0x94/0xb0 [btrfs]
         btrfs_commit_transaction+0x415/0xa00 [btrfs]
         btrfs_mksubvol+0x496/0x4e0 [btrfs]
         btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs]
         btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs]
         btrfs_ioctl+0xa90/0x2b40 [btrfs]
         do_vfs_ioctl+0xa9/0x6d0
         ksys_ioctl+0x67/0x90
         __x64_sys_ioctl+0x1a/0x20
         do_syscall_64+0x65/0x240
         entry_SYSCALL_64_after_hwframe+0x49/0xbe

  other info that might help us debug this:

  Chain exists of:
    &fs_info->qgroup_ioctl_lock#2 --> &fs_info->reloc_mutex --> &fs_info->tree_log_mutex

   Possible unsafe locking scenario:

         CPU0                    CPU1
         ----                    ----
    lock(&fs_info->tree_log_mutex);
                                 lock(&fs_info->reloc_mutex);
                                 lock(&fs_info->tree_log_mutex);
    lock(&fs_info->qgroup_ioctl_lock#2);

   *** DEADLOCK ***

  6 locks held by btrfs/8631:
   #0: 00000000ed8f23f6 (sb_writers#12){.+.+}, at: mnt_want_write_file+0x28/0x60
   #1: 000000009fb1597a (&type->i_mutex_dir_key#10/1){+.+.}, at: btrfs_mksubvol+0x70/0x4e0 [btrfs]
   #2: 0000000088c5ad88 (&fs_info->subvol_sem){++++}, at: btrfs_mksubvol+0x128/0x4e0 [btrfs]
   #3: 000000009606fc3e (sb_internal#2){.+.+}, at: start_transaction+0x37a/0x520 [btrfs]
   #4: 00000000f82bbdf5 (&fs_info->reloc_mutex){+.+.}, at: btrfs_commit_transaction+0x40d/0xa00 [btrfs]
   #5: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs]

[CAUSE]
Due to the delayed subvolume creation, we need to call
btrfs_qgroup_inherit() inside commit transaction code, with a lot of
other mutex hold.
This hell of lock chain can lead to above problem.

[FIX]
On the other hand, we don't really need to hold qgroup_ioctl_lock if
we're in the context of create_pending_snapshot().
As in that context, we're the only one being able to modify qgroup.

All other qgroup functions which needs qgroup_ioctl_lock are either
holding a transaction handle, or will start a new transaction:
  Functions will start a new transaction():
  * btrfs_quota_enable()
  * btrfs_quota_disable()
  Functions hold a transaction handler:
  * btrfs_add_qgroup_relation()
  * btrfs_del_qgroup_relation()
  * btrfs_create_qgroup()
  * btrfs_remove_qgroup()
  * btrfs_limit_qgroup()
  * btrfs_qgroup_inherit() call inside create_subvol()

So we have a higher level protection provided by transaction, thus we
don't need to always hold qgroup_ioctl_lock in btrfs_qgroup_inherit().

Only the btrfs_qgroup_inherit() call in create_subvol() needs to hold
qgroup_ioctl_lock, while the btrfs_qgroup_inherit() call in
create_pending_snapshot() is already protected by transaction.

So the fix is to detect the context by checking
trans->transaction->state.
If we're at TRANS_STATE_COMMIT_DOING, then we're in commit transaction
context and no need to get the mutex.

Reported-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: correctly validate compression type
Johannes Thumshirn [Thu, 6 Jun 2019 10:07:15 +0000 (12:07 +0200)]
btrfs: correctly validate compression type

Nikolay reported the following KASAN splat when running btrfs/048:

[ 1843.470920] ==================================================================
[ 1843.471971] BUG: KASAN: slab-out-of-bounds in strncmp+0x66/0xb0
[ 1843.472775] Read of size 1 at addr ffff888111e369e2 by task btrfs/3979

[ 1843.473904] CPU: 3 PID: 3979 Comm: btrfs Not tainted 5.2.0-rc3-default #536
[ 1843.475009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[ 1843.476322] Call Trace:
[ 1843.476674]  dump_stack+0x7c/0xbb
[ 1843.477132]  ? strncmp+0x66/0xb0
[ 1843.477587]  print_address_description+0x114/0x320
[ 1843.478256]  ? strncmp+0x66/0xb0
[ 1843.478740]  ? strncmp+0x66/0xb0
[ 1843.479185]  __kasan_report+0x14e/0x192
[ 1843.479759]  ? strncmp+0x66/0xb0
[ 1843.480209]  kasan_report+0xe/0x20
[ 1843.480679]  strncmp+0x66/0xb0
[ 1843.481105]  prop_compression_validate+0x24/0x70
[ 1843.481798]  btrfs_xattr_handler_set_prop+0x65/0x160
[ 1843.482509]  __vfs_setxattr+0x71/0x90
[ 1843.483012]  __vfs_setxattr_noperm+0x84/0x130
[ 1843.483606]  vfs_setxattr+0xac/0xb0
[ 1843.484085]  setxattr+0x18c/0x230
[ 1843.484546]  ? vfs_setxattr+0xb0/0xb0
[ 1843.485048]  ? __mod_node_page_state+0x1f/0xa0
[ 1843.485672]  ? _raw_spin_unlock+0x24/0x40
[ 1843.486233]  ? __handle_mm_fault+0x988/0x1290
[ 1843.486823]  ? lock_acquire+0xb4/0x1e0
[ 1843.487330]  ? lock_acquire+0xb4/0x1e0
[ 1843.487842]  ? mnt_want_write_file+0x3c/0x80
[ 1843.488442]  ? debug_lockdep_rcu_enabled+0x22/0x40
[ 1843.489089]  ? rcu_sync_lockdep_assert+0xe/0x70
[ 1843.489707]  ? __sb_start_write+0x158/0x200
[ 1843.490278]  ? mnt_want_write_file+0x3c/0x80
[ 1843.490855]  ? __mnt_want_write+0x98/0xe0
[ 1843.491397]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.492201]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 1843.493201]  do_syscall_64+0x6c/0x230
[ 1843.493988]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 1843.495041] RIP: 0033:0x7fa7a8a7707a
[ 1843.495819] Code: 48 8b 0d 21 de 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 be 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ee dd 2b 00 f7 d8 64 89 01 48
[ 1843.499203] RSP: 002b:00007ffcb73bca38 EFLAGS: 00000202 ORIG_RAX: 00000000000000be
[ 1843.500210] RAX: ffffffffffffffda RBX: 00007ffcb73bda9d RCX: 00007fa7a8a7707a
[ 1843.501170] RDX: 00007ffcb73bda9d RSI: 00000000006dc050 RDI: 0000000000000003
[ 1843.502152] RBP: 00000000006dc050 R08: 0000000000000000 R09: 0000000000000000
[ 1843.503109] R10: 0000000000000002 R11: 0000000000000202 R12: 00007ffcb73bda91
[ 1843.504055] R13: 0000000000000003 R14: 00007ffcb73bda82 R15: ffffffffffffffff

[ 1843.505268] Allocated by task 3979:
[ 1843.505771]  save_stack+0x19/0x80
[ 1843.506211]  __kasan_kmalloc.constprop.5+0xa0/0xd0
[ 1843.506836]  setxattr+0xeb/0x230
[ 1843.507264]  __x64_sys_fsetxattr+0xba/0xe0
[ 1843.507886]  do_syscall_64+0x6c/0x230
[ 1843.508429]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

[ 1843.509558] Freed by task 0:
[ 1843.510188] (stack is not available)

[ 1843.511309] The buggy address belongs to the object at ffff888111e369e0
                which belongs to the cache kmalloc-8 of size 8
[ 1843.514095] The buggy address is located 2 bytes inside of
                8-byte region [ffff888111e369e0ffff888111e369e8)
[ 1843.516524] The buggy address belongs to the page:
[ 1843.517561] page:ffff88813f478d80 refcount:1 mapcount:0 mapping:ffff88811940c300 index:0xffff888111e373b8 compound_mapcount: 0
[ 1843.519993] flags: 0x4404000010200(slab|head)
[ 1843.520951] raw: 0004404000010200 ffff88813f48b008 ffff888119403d50 ffff88811940c300
[ 1843.522616] raw: ffff888111e373b8 000000000016000f 00000001ffffffff 0000000000000000
[ 1843.524281] page dumped because: kasan: bad access detected

[ 1843.525936] Memory state around the buggy address:
[ 1843.526975]  ffff888111e36880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.528479]  ffff888111e36900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.530138] >ffff888111e36980: fc fc fc fc fc fc fc fc fc fc fc fc 02 fc fc fc
[ 1843.531877]                                                        ^
[ 1843.533287]  ffff888111e36a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.534874]  ffff888111e36a80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 1843.536468] ==================================================================

This is caused by supplying a too short compression value ('lz') in the
test-case and comparing it to 'lzo' with strncmp() and a length of 3.
strncmp() read past the 'lz' when looking for the 'o' and thus caused an
out-of-bounds read.

Introduce a new check 'btrfs_compress_is_valid_type()' which not only
checks the user-supplied value against known compression types, but also
employs checks for too short values.

Reported-by: Nikolay Borisov <nborisov@suse.com>
Fixes: 272e5326c783 ("btrfs: prop: fix vanished compression property after failed set")
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agoBtrfs: fix data loss after inode eviction, renaming it, and fsync it
Filipe Manana [Fri, 7 Jun 2019 10:25:24 +0000 (11:25 +0100)]
Btrfs: fix data loss after inode eviction, renaming it, and fsync it

When we log an inode, regardless of logging it completely or only that it
exists, we always update it as logged (logged_trans and last_log_commit
fields of the inode are updated). This is generally fine and avoids future
attempts to log it from having to do repeated work that brings no value.

However, if we write data to a file, then evict its inode after all the
dealloc was flushed (and ordered extents completed), rename the file and
fsync it, we end up not logging the new extents, since the rename may
result in logging that the inode exists in case the parent directory was
logged before. The following reproducer shows and explains how this can
happen:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ mkdir /mnt/dir
  $ touch /mnt/dir/foo
  $ touch /mnt/dir/bar

  # Do a direct IO write instead of a buffered write because with a
  # buffered write we would need to make sure dealloc gets flushed and
  # complete before we do the inode eviction later, and we can not do that
  # from user space with call to things such as sync(2) since that results
  # in a transaction commit as well.
  $ xfs_io -d -c "pwrite -S 0xd3 0 4K" /mnt/dir/bar

  # Keep the directory dir in use while we evict inodes. We want our file
  # bar's inode to be evicted but we don't want our directory's inode to
  # be evicted (if it were evicted too, we would not be able to reproduce
  # the issue since the first fsync below, of file foo, would result in a
  # transaction commit.
  $ ( cd /mnt/dir; while true; do :; done ) &
  $ pid=$!

  # Wait a bit to give time for the background process to chdir.
  $ sleep 0.1

  # Evict all inodes, except the inode for the directory dir because it is
  # currently in use by our background process.
  $ echo 2 > /proc/sys/vm/drop_caches

  # fsync file foo, which ends up persisting information about the parent
  # directory because it is a new inode.
  $ xfs_io -c fsync /mnt/dir/foo

  # Rename bar, this results in logging that this inode exists (inode item,
  # names, xattrs) because the parent directory is in the log.
  $ mv /mnt/dir/bar /mnt/dir/baz

  # Now fsync baz, which ends up doing absolutely nothing because of the
  # rename operation which logged that the inode exists only.
  $ xfs_io -c fsync /mnt/dir/baz

  <power failure>

  $ mount /dev/sdb /mnt
  $ od -t x1 -A d /mnt/dir/baz
  0000000

    --> Empty file, data we wrote is missing.

Fix this by not updating last_sub_trans of an inode when we are logging
only that it exists and the inode was not yet logged since it was loaded
from disk (full_sync bit set), this is enough to make btrfs_inode_in_log()
return false for this scenario and make us log the inode. The logged_trans
of the inode is still always setsince that alone is used to track if names
need to be deleted as part of unlink operations.

Fixes: 257c62e1bce03e ("Btrfs: avoid tree log commit when there are no changes")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: raid56: clear incompat block group flags after removing the last one
David Sterba [Tue, 11 Jun 2019 12:31:01 +0000 (14:31 +0200)]
btrfs: raid56: clear incompat block group flags after removing the last one

The incompat bit for RAID56 is set either at mount time or automatically
when the profile is used by balance. The part where the bit is removed
is missing and can be unexpected or undesired when an older kernel is
needed.

This patch will drop the incompat bit after this command, assuming
that RAID5 profile is not used by system or metadata:

 $ btrfs balance start -dconvert=raid5 /mnt
 $ btrfs balance start -dconvert=raid1 /mnt

This will print "clearing 128 feature flag" to the system log.

The patch is safe for backporting to older kernels.

Reported-by: Hugo Mills <hugo@carfax.org.uk>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: switch extent_buffer write_locks from atomic to int
David Sterba [Thu, 2 May 2019 14:53:47 +0000 (16:53 +0200)]
btrfs: switch extent_buffer write_locks from atomic to int

The write_locks is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: switch extent_buffer spinning_writers from atomic to int
David Sterba [Thu, 2 May 2019 14:51:53 +0000 (16:51 +0200)]
btrfs: switch extent_buffer spinning_writers from atomic to int

The spinning_writers is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: switch extent_buffer blocking_writers from atomic to int
David Sterba [Thu, 2 May 2019 14:47:23 +0000 (16:47 +0200)]
btrfs: switch extent_buffer blocking_writers from atomic to int

The blocking_writers is either 0 or 1 and always updated under the lock,
so we don't need the atomic_t semantics.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: assert delayed ref lock in btrfs_find_delayed_ref_head
David Sterba [Wed, 27 Mar 2019 15:19:55 +0000 (16:19 +0100)]
btrfs: assert delayed ref lock in btrfs_find_delayed_ref_head

Turn the comment about required lock into an assertion.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: tests: add locks around add_extent_mapping
David Sterba [Wed, 3 Apr 2019 17:32:56 +0000 (19:32 +0200)]
btrfs: tests: add locks around add_extent_mapping

There are no concerns about locking during the selftests so the locks
are not necessary, but following patches will add lockdep assertions to
add_extent_mapping so this is needed in tests too.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Document __etree_search
Nikolay Borisov [Wed, 5 Jun 2019 11:50:04 +0000 (14:50 +0300)]
btrfs: Document __etree_search

The function has a lot of return values and specific conventions making
it cumbersome to understand what's returned. Have a go at documenting
its parameters and return values.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Don't trim returned range based on input value in find_first_clear_extent_bit
Nikolay Borisov [Mon, 3 Jun 2019 10:06:02 +0000 (13:06 +0300)]
btrfs: Don't trim returned range based on input value in find_first_clear_extent_bit

Currently find_first_clear_extent_bit always returns a range whose
starting value is >= passed 'start'. This implicit trimming behavior is
somewhat subtle and an implementation detail.

Instead, this patch modifies the function such that now it always
returns the range which contains passed 'start' and has the given bits
unset. This range could either be due to presence of existing records
which contains 'start' but have the bits unset or because there are no
records that contain the given starting offset.

This patch also adds test cases which cover find_first_clear_extent_bit
since they were missing up until now.

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: trim: make reserved device area adjustments more explicit
Nikolay Borisov [Mon, 3 Jun 2019 10:06:01 +0000 (13:06 +0300)]
btrfs: trim: make reserved device area adjustments more explicit

Currently the first megabyte on a device housing a btrfs filesystem is
exempt from allocation and trimming. Currently this is not a problem
since 'start' is set to 1M at the beginning of btrfs_trim_free_extents
and find_first_clear_extent_bit always returns a range that is >= start.

However, in a follow up patch find_first_clear_extent_bit will be
changed such that it will return a range containing 'start' and this
range may very well be 0...>=1M so 'start'.

Future proof the sole user of find_first_clear_extent_bit by setting
'start' after the function is called. No functional changes.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use file:line format for assertion report
David Sterba [Thu, 30 May 2019 16:43:53 +0000 (18:43 +0200)]
btrfs: use file:line format for assertion report

The filename:line format is commonly understood by editors and can be
copy&pasted more easily than the current format.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: remove assumption about csum type form btrfs_print_data_csum_error()
Johannes Thumshirn [Mon, 3 Jun 2019 14:58:58 +0000 (16:58 +0200)]
btrfs: remove assumption about csum type form btrfs_print_data_csum_error()

btrfs_print_data_csum_error() still assumed checksums to be 32 bit in
size.  Make it size agnostic.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: directly call into crypto framework for checksumming
Johannes Thumshirn [Mon, 3 Jun 2019 14:58:57 +0000 (16:58 +0200)]
btrfs: directly call into crypto framework for checksumming

Currently btrfs_csum_data() relied on the crc32c() wrapper around the
crypto framework for calculating the CRCs.

As we have our own crypto_shash structure in the fs_info now, we can
directly call into the crypto framework without going trough the wrapper.

This way we can even remove the btrfs_csum_data() and btrfs_csum_final()
wrappers.

The module dependency on crc32c is preserved via MODULE_SOFTDEP("pre:
crc32c"), which was previously provided by LIBCRC32C config option doing
the same.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: add boilerplate code for directly including the crypto framework
Johannes Thumshirn [Mon, 3 Jun 2019 14:58:56 +0000 (16:58 +0200)]
btrfs: add boilerplate code for directly including the crypto framework

Add boilerplate code for directly including the crypto framework.  This
helps us flipping the switch for new algorithms.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Simplify btrfs_check_super_csum() and get rid of size assumptions
Johannes Thumshirn [Mon, 3 Jun 2019 14:58:55 +0000 (16:58 +0200)]
btrfs: Simplify btrfs_check_super_csum() and get rid of size assumptions

Now that we have already checked for a valid checksum type before
calling btrfs_check_super_csum(), it can be simplified even further.

While at it get rid of the implicit size assumption of the resulting
checksum as well.

This is a preparation for changing all checksum functionality to use the
crypto layer later.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: check for supported superblock checksum type before checksum validation
Johannes Thumshirn [Mon, 3 Jun 2019 14:58:54 +0000 (16:58 +0200)]
btrfs: check for supported superblock checksum type before checksum validation

Now that we have factorerd out the superblock checksum type validation,
we can check for supported superblock checksum types before doing the
actual validation of the superblock read from disk.

This leads the path to further simplifications of
btrfs_check_super_csum() later on.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: add common checksum type validation
Johannes Thumshirn [Mon, 3 Jun 2019 14:58:53 +0000 (16:58 +0200)]
btrfs: add common checksum type validation

Currently btrfs is only supporting CRC32C as checksumming algorithm. As
this is about to change provide a function to validate the checksum type
in the superblock against all possible algorithms.

This makes adding new algorithms easier as there are fewer places to
adjust when adding new algorithms.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: format checksums according to type for printing
Johannes Thumshirn [Mon, 3 Jun 2019 14:58:52 +0000 (16:58 +0200)]
btrfs: format checksums according to type for printing

Add a small helper for btrfs_print_data_csum_error() which formats the
checksum according to it's type for pretty printing.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
[ shorten macro name ]
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: don't assume compressed_bio sums to be 4 bytes
Johannes Thumshirn [Wed, 22 May 2019 08:19:02 +0000 (10:19 +0200)]
btrfs: don't assume compressed_bio sums to be 4 bytes

BTRFS has the implicit assumption that a checksum in compressed_bio is 4
bytes. While this is true for CRC32C, it is not for any other checksum.

Change the data type to be a byte array and adjust loop index calculation
accordingly.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: don't assume ordered sums to be 4 bytes
Johannes Thumshirn [Wed, 22 May 2019 08:19:01 +0000 (10:19 +0200)]
btrfs: don't assume ordered sums to be 4 bytes

BTRFS has the implicit assumption that a checksum in btrfs_orderd_sums
is 4 bytes. While this is true for CRC32C, it is not for any other
checksum.

Change the data type to be a byte array and adjust loop index
calculation accordingly.

This includes moving the adjustment of 'index' by 'ins_size' in
btrfs_csum_file_blocks() before dividing 'ins_size' by the checksum
size, because before this patch the 'sums' member of 'struct
btrfs_ordered_sum' was 4 Bytes in size and afterwards it is only one
byte.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use btrfs_crc32c{,_final}() in for free space cache
Johannes Thumshirn [Wed, 22 May 2019 08:19:00 +0000 (10:19 +0200)]
btrfs: use btrfs_crc32c{,_final}() in for free space cache

The CRC checksum in the free space cache is not dependant on the super
block's csum_type field but always a CRC32C.

So use btrfs_crc32c() and btrfs_crc32c_final() instead of
btrfs_csum_data() and btrfs_csum_final() for computing these checksums.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: resurrect btrfs_crc32c()
Johannes Thumshirn [Wed, 22 May 2019 08:18:59 +0000 (10:18 +0200)]
btrfs: resurrect btrfs_crc32c()

Commit 9678c54388b6 ("btrfs: Remove custom crc32c init code") removed
the btrfs_crc32c() function, because it was a duplicate of the crc32c()
library function we already have in the kernel.

Resurrect it as a shim wrapper over crc32c() to make following
transformations of the checksumming code in btrfs easier.

Also provide a btrfs_crc32_final() to ease following transformations.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use btrfs_csum_data() instead of directly calling crc32c
Johannes Thumshirn [Wed, 22 May 2019 08:18:58 +0000 (10:18 +0200)]
btrfs: use btrfs_csum_data() instead of directly calling crc32c

btrfsic_test_for_metadata() directly calls the crc32c() library function
for calculating the CRC32C checksum, but then uses btrfs_csum_final() to
invert the result.

To ease further refactoring and development around checksumming in BTRFS
convert to calling btrfs_csum_data(), which is a wrapper around
crc32c().

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Flush before reflinking any extent to prevent NOCOW write falling back to...
Qu Wenruo [Wed, 8 May 2019 10:49:58 +0000 (18:49 +0800)]
btrfs: Flush before reflinking any extent to prevent NOCOW write falling back to COW without data reservation

[BUG]
The following script can cause unexpected fsync failure:

  #!/bin/bash

  dev=/dev/test/test
  mnt=/mnt/btrfs

  mkfs.btrfs -f $dev -b 512M > /dev/null
  mount $dev $mnt -o nospace_cache

  # Prealloc one extent
  xfs_io -f -c "falloc 8k 64m" $mnt/file1
  # Fill the remaining data space
  xfs_io -f -c "pwrite 0 -b 4k 512M" $mnt/padding
  sync

  # Write into the prealloc extent
  xfs_io -c "pwrite 1m 16m" $mnt/file1

  # Reflink then fsync, fsync would fail due to ENOSPC
  xfs_io -c "reflink $mnt/file1 8k 0 4k" -c "fsync" $mnt/file1
  umount $dev

The fsync fails with ENOSPC, and the last page of the buffered write is
lost.

[CAUSE]
This is caused by:
- Btrfs' back reference only has extent level granularity
  So write into shared extent must be COWed even only part of the extent
  is shared.

So for above script we have:
- fallocate
  Create a preallocated extent where we can do NOCOW write.

- fill all the remaining data and unallocated space

- buffered write into preallocated space
  As we have not enough space available for data and the extent is not
  shared (yet) we fall into NOCOW mode.

- reflink
  Now part of the large preallocated extent is shared, later write
  into that extent must be COWed.

- fsync triggers writeback
  But now the extent is shared and therefore we must fallback into COW
  mode, which fails with ENOSPC since there's not enough space to
  allocate data extents.

[WORKAROUND]
The workaround is to ensure any buffered write in the related extents
(not just the reflink source range) get flushed before reflink/dedupe,
so that NOCOW writes succeed that happened before reflinking succeed.

The workaround is expensive, we could do it better by only flushing
NOCOW range, but that needs extra accounting for NOCOW range.
For now, fix the possible data loss first.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Return EAGAIN if we can't start no snpashot write in check_can_nocow
Nikolay Borisov [Tue, 7 May 2019 07:23:46 +0000 (10:23 +0300)]
btrfs: Return EAGAIN if we can't start no snpashot write in check_can_nocow

The first thing code does in check_can_nocow is trying to block
concurrent snapshots. If this fails (due to snpashot already being in
progress) the function returns ENOSPC which makes no sense. Instead
return EAGAIN. Despite this return value not being propagated to callers
it's good practice to return the closest in terms of semantics error
code. No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Add comments on locking of several device-related fields
Nikolay Borisov [Thu, 9 May 2019 15:11:11 +0000 (18:11 +0300)]
btrfs: Add comments on locking of several device-related fields

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Always use a cached extent_state in btrfs_lock_and_flush_ordered_range
Nikolay Borisov [Tue, 7 May 2019 07:19:24 +0000 (10:19 +0300)]
btrfs: Always use a cached extent_state in btrfs_lock_and_flush_ordered_range

In case no cached_state argument is passed to
btrfs_lock_and_flush_ordered_range use one locally in the function. This
optimises the case when an ordered extent is found since the unlock
function will be able to unlock that state directly without searching
for it again.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: Use newly introduced btrfs_lock_and_flush_ordered_range
Nikolay Borisov [Tue, 7 May 2019 07:19:23 +0000 (10:19 +0300)]
btrfs: Use newly introduced btrfs_lock_and_flush_ordered_range

There several functions which open code
btrfs_lock_and_flush_ordered_range, just replace them with a call to the
function. No functional changes.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: add new helper btrfs_lock_and_flush_ordered_range
Nikolay Borisov [Tue, 7 May 2019 07:19:22 +0000 (10:19 +0300)]
btrfs: add new helper btrfs_lock_and_flush_ordered_range

There is a certain idiom used in multiple places in btrfs' codebase,
dealing with flushing an ordered range. Factor this in a separate
function that can be reused. Future patches will replace the existing
code with that function.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: remove the incorrect comment on RO fs when btrfs_run_delalloc_range() fails
Qu Wenruo [Thu, 9 May 2019 07:31:50 +0000 (15:31 +0800)]
btrfs: remove the incorrect comment on RO fs when btrfs_run_delalloc_range() fails

At the context of btrfs_run_delalloc_range(), we haven't started/joined
a transaction, thus even something went wrong, we can't and won't abort
transaction, thus no way to make the fs RO.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: extent-tree: Add trace events for space info numbers update
Qu Wenruo [Mon, 29 Apr 2019 06:03:33 +0000 (14:03 +0800)]
btrfs: extent-tree: Add trace events for space info numbers update

Add trace event for update_bytes_pinned() and update_bytes_may_use() to
detect underflow better.

The output would be something like (only showing data part):

  ## Buffered write start, 16K total ##
  2255.954 xfs_io/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=0 diff=4096
  2257.169 sudo/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=4096 diff=4096
  2257.346 sudo/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=8192 diff=4096
  2257.542 sudo/860 btrfs:update_bytes_may_use:(nil)U: type=DATA old=12288 diff=4096

  ## Delalloc start ##
  3727.853 kworker/u8:3-e/700 btrfs:update_bytes_may_use:(nil)U: type=DATA old=16384 diff=-16384

  ## Space cache update ##
  3733.132 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=0 diff=65536
  3733.169 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=65536 diff=-65536
  3739.868 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=0 diff=65536
  3739.891 sudo/862 btrfs:update_bytes_may_use:(nil)U: type=DATA old=65536 diff=-65536

These two trace events will allow bcc tool to probe btrfs_space_info
changes and detect underflow with more details (e.g. backtrace for each
update).

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: extent-tree: Add lockdep assert when updating space info
Qu Wenruo [Mon, 29 Apr 2019 06:03:32 +0000 (14:03 +0800)]
btrfs: extent-tree: Add lockdep assert when updating space info

Just add a safe net for btrfs_space_info member updating.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: read number of data stripes from map only once
David Sterba [Fri, 17 May 2019 09:43:45 +0000 (11:43 +0200)]
btrfs: read number of data stripes from map only once

There are several places that call nr_data_stripes, but this value does
not change.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: constify map parameter for nr_parity_stripes and nr_data_stripes
David Sterba [Fri, 17 May 2019 09:43:43 +0000 (11:43 +0200)]
btrfs: constify map parameter for nr_parity_stripes and nr_data_stripes

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: refactor helper for bg flags to name conversion
David Sterba [Fri, 17 May 2019 09:43:41 +0000 (11:43 +0200)]
btrfs: refactor helper for bg flags to name conversion

The helper lacks the btrfs_ prefix and the parameter is the raw
blockgroup type, so none of the callers has to do the flags -> index
conversion.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: factor out devs_max setting in __btrfs_alloc_chunk
David Sterba [Fri, 17 May 2019 09:43:38 +0000 (11:43 +0200)]
btrfs: factor out devs_max setting in __btrfs_alloc_chunk

Merge the repeated code before the if-else block.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use u8 for raid_array members
David Sterba [Fri, 17 May 2019 09:43:36 +0000 (11:43 +0200)]
btrfs: use u8 for raid_array members

The raid_attr table is now 7 * 56 = 392 bytes long, consisting of just
small numbers so we don't have to use ints. New size is 7 * 32 = 224,
saving 3 cachelines.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: factor out helper for counting data stripes
David Sterba [Fri, 17 May 2019 09:43:34 +0000 (11:43 +0200)]
btrfs: factor out helper for counting data stripes

Factor the sequence of ifs to a helper, the 'data stripes' here means
the number of stripes without redundancy and parity.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use raid_attr table for btrfs_bg_type_to_factor
David Sterba [Fri, 17 May 2019 09:43:31 +0000 (11:43 +0200)]
btrfs: use raid_attr table for btrfs_bg_type_to_factor

The factor is the number of copies.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use raid_attr table to find profiles for integrity lowering
David Sterba [Fri, 17 May 2019 09:43:29 +0000 (11:43 +0200)]
btrfs: use raid_attr table to find profiles for integrity lowering

Replace open coded list of the profiles by selecting them from the
raid_attr table. The criteria are now more explicit, we need profiles
that have more than 1 copy of the data or can reconstruct the data with
a missing device.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use raid_attr to get allowed profiles for balance conversion
David Sterba [Fri, 17 May 2019 09:43:27 +0000 (11:43 +0200)]
btrfs: use raid_attr to get allowed profiles for balance conversion

Iterate over the table and gather all allowed profiles for a given
number of devices, instead of open coding.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use raid_attr in btrfs_chunk_max_errors
David Sterba [Fri, 17 May 2019 09:43:22 +0000 (11:43 +0200)]
btrfs: use raid_attr in btrfs_chunk_max_errors

The number of tolerated failures is stored in the raid_attr table, use
it.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: use raid_attr table in get_profile_num_devs
David Sterba [Fri, 17 May 2019 09:43:20 +0000 (11:43 +0200)]
btrfs: use raid_attr table in get_profile_num_devs

The dev_max constraints are defined in the raid_attr table, use it
instead of open-coding it.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: remove mapping tree structures indirection
David Sterba [Fri, 17 May 2019 09:43:17 +0000 (11:43 +0200)]
btrfs: remove mapping tree structures indirection

fs_info::mapping_tree is the physical<->logical mapping tree and uses
the same underlying structure as extents, but is embedded to another
structure. There are no other members and this indirection is useless.
No functional change.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: raid56: allow the exact minimum number of devices for balance convert
David Sterba [Fri, 17 May 2019 09:43:15 +0000 (11:43 +0200)]
btrfs: raid56: allow the exact minimum number of devices for balance convert

The minimum number of devices for RAID5 is 2, though this is only a bit
expensive RAID1, and for RAID6 it's 3, which is a triple copy that works
only 3 devices.

mkfs.btrfs allows that and mounting such filesystem also works, so the
conversion via balance filters is inconsistent with the others and we
should not prevent it.

Signed-off-by: David Sterba <dsterba@suse.com>
13 months agobtrfs: fix minimum number of chunk errors for DUP
David Sterba [Fri, 17 May 2019 09:43:13 +0000 (11:43 +0200)]
btrfs: fix minimum number of chunk errors for DUP

The list of profiles in btrfs_chunk_max_errors lists DUP as a profile
DUP able to tolerate 1 device missing. Though this profile is special
with 2 copies, it still needs the device, unlike the others.

Looking at the history of changes, thre's no clear reason why DUP is
there, functions were refactored and blocks of code merged to one
helper.

d20983b40e828 Btrfs: fix writing data into the seed filesystem
  - factor code to a helper

de11cc12df173 Btrfs: don't pre-allocate btrfs bio
  - unrelated change, DUP still in the list with max errors 1

a236aed14ccb0 Btrfs: Deal with failed writes in mirrored configurations
  - introduced the max errors, leaves DUP and RAID1 in the same group

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>