sfrench/cifs-2.6.git
16 months agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Sun, 27 Jan 2019 16:59:12 +0000 (08:59 -0800)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.

 2) Integer overflow in ktime handling of bcm can code, from Oliver
    Hartkopp.

 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
    Horman.

 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.

 5) Use after free in ax25, from Eric Dumazet.

 6) Several fixes to the SSN support in SCTP, from Xin Long.

 7) Do not process frames after a NAPI reschedule in ibmveth, from
    Thomas Falcon.

 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
  qed: Revert error handling changes.
  cfg80211: extend range deviation for DMG
  cfg80211: reg: remove warn_on for a normal case
  mac80211: Add attribute aligned(2) to struct 'action'
  mac80211: don't initiate TDLS connection if station is not associated to AP
  nl80211: fix NLA_POLICY_NESTED() arguments
  ibmveth: Do not process frames after calling napi_reschedule
  net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
  net: usb: asix: ax88772_bind return error when hw_reset fail
  MAINTAINERS: Update cavium networking drivers
  net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
  net/mlx4_core: Add masking for a few queries on HCA caps
  sctp: set flow sport from saddr only when it's 0
  sctp: set chunk transport correctly when it's a new asoc
  sctp: improve the events for sctp stream adding
  sctp: improve the events for sctp stream reset
  ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
  ax25: fix possible use-after-free
  sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
  hv_netvsc: fix typos in code comments
  ...

16 months agoMerge tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Sat, 26 Jan 2019 23:38:22 +0000 (15:38 -0800)]
Merge tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb3 fixes from Steve French:
 "A set of small smb3 fixes, some fixing various crediting issues
  discovered during xfstest runs, five for stable"

* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
  smb3: add credits we receive from oplock/break PDUs
  CIFS: Fix mounts if the client is low on credits
  CIFS: Do not assume one credit for async responses
  CIFS: Fix credit calculations in compound mid callback
  CIFS: Fix credit calculation for encrypted reads with errors
  CIFS: Fix credits calculations for reads with errors
  CIFS: Do not reconnect TCP session in add_credits()
  smb3: Cleanup license mess
  CIFS: Fix possible hang during async MTU reads and writes
  cifs: fix memory leak of an allocated cifs_ntsd structure

16 months agoMerge tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio
Linus Torvalds [Sat, 26 Jan 2019 23:27:04 +0000 (15:27 -0800)]
Merge tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio

Pull VFIO fixes from Alex Williamson:

 - cleanup licenses in new files (Thomas Gleixner)

 - cleanup new compiler warnings (Alexey Kardashevskiy)

* tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci/nvlink2: Fix ancient gcc warnings
  vfio/pci: Cleanup license mess

16 months agoMerge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Linus Torvalds [Sat, 26 Jan 2019 23:03:43 +0000 (15:03 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Six fixes, all of which appear to have user visible consequences.

  The DMA one is a regression fix from the merge window and of the
  others, four are driver specific and one specific to the target code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Use explicit access size in ufshcd_dump_regs
  scsi: tcmu: fix use after free
  scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
  scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
  scsi: communicate max segment size to the DMA mapping code

16 months agoMerge tag 'for-linus-20190125' of git://git.kernel.dk/linux-block
Linus Torvalds [Sat, 26 Jan 2019 20:42:41 +0000 (12:42 -0800)]
Merge tag 'for-linus-20190125' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "A collection of fixes for this release. This contains:

   - Silence sparse rightfully complaining about non-static wbt
     functions (Bart)

   - Fixes for the zoned comments/ioctl documentation (Damien)

   - direct-io fix that's been lingering for a while (Ernesto)

   - cgroup writeback fix (Tejun)

   - Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)

   - Block recursion tracking fix (Ming)

   - Fix debugfs command flag naming for a few flags (Jianchao)"

* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
  block: Fix comment typo
  uapi: fix ioctl documentation
  blk-wbt: Declare local functions static
  blk-mq: fix the cmd_flag_name array
  nvme-multipath: drop optimization for static ANA group IDs
  nvmet-rdma: fix null dereference under heavy load
  nvme-rdma: rework queue maps handling
  nvme-tcp: fix timeout handler
  nvme-rdma: fix timeout handler
  writeback: synchronize sync(2) against cgroup writeback membership switches
  block: cover another queue enter recursion via BIO_QUEUE_ENTERED
  direct-io: allow direct writes to empty inodes

16 months agoqed: Revert error handling changes.
David S. Miller [Fri, 25 Jan 2019 23:32:28 +0000 (15:32 -0800)]
qed: Revert error handling changes.

This is new code and not bug fixes.

This reverts all changes added by merge commit
8fb18be93efd7292d6ee403b9f61af1008239639

Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoMerge tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Fri, 25 Jan 2019 23:07:03 +0000 (13:07 -1000)]
Merge tag 'mmc-v5.0-rc2' of git://git./linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:

 - sdhci-acpi: Fixup build dependency for PCI

 - sdhci-omap: Resolve Kconfig warnings on keystone

 - sdhci-iproc: Propagate errors from DT parsing

 - meson-gx: Fixup IRQ handling in release callback

 - meson-gx: Use signal re-sampling to fixup tuning

 - dw_mmc-bluefield: Fix the license information

* tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc-bluefield: : Fix the license information
  mmc: meson-gx: enable signal re-sampling together with tuning
  mmc: sdhci-iproc: handle mmc_of_parse() errors during probe
  mmc: meson-gx: Free irq in release() callback
  mmc: host: Fix Kconfig warnings on keystone_defconfig
  mmc: sdhci-acpi: Make PCI dependency explicit

16 months agoMerge tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Fri, 25 Jan 2019 23:03:34 +0000 (13:03 -1000)]
Merge tag 'char-misc-5.0-rc4' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes to resolve some
  reported issues, as well as a number of binderfs fixups that were
  found after auditing the filesystem code by Al Viro. As binderfs
  hasn't been in a previous release yet, it's good to get these in now
  before the first users show up.

  All of these have been in linux-next for a bit with no reported
  issues"

* tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'
  binderfs: switch from d_add() to d_instantiate()
  binderfs: drop lock in binderfs_binder_ctl_create
  binderfs: kill_litter_super() before cleanup
  binderfs: rework binderfs_binder_device_create()
  binderfs: rework binderfs_fill_super()
  binderfs: prevent renaming the control dentry
  binderfs: remove outdated comment
  binderfs: use __u32 for device numbers
  binderfs: use correct include guards in header
  misc: pvpanic: fix warning implicit declaration
  char/mwave: fix potential Spectre v1 vulnerability
  misc: ibmvsm: Fix potential NULL pointer dereference
  binderfs: fix error return code in binderfs_fill_super()
  mei: me: add denverton innovation engine device IDs
  mei: me: mark LBG devices as having dma support
  mei: dma: silent the reject message
  binderfs: handle !CONFIG_IPC_NS builds
  binderfs: reserve devices for initial mount
  binderfs: rename header to binderfs.h
  ...

16 months agoMerge tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Fri, 25 Jan 2019 23:02:12 +0000 (13:02 -1000)]
Merge tag 'staging-5.0-rc4' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.0-rc4.

  They resolve some reported bugs and add a new device id for one
  driver. Nothing major at all, but all good to have.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ion: Support cpu access during dma_buf_detach
  staging: rtl8723bs: Fix build error with Clang when inlining is disabled
  staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1
  staging: vchiq: Fix local event signalling
  Staging: wilc1000: unlock on error in init_chip()
  staging: wilc1000: fix memory leak in wilc_add_rx_gtk
  staging: wilc1000: fix registration frame size

16 months agoMerge tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Linus Torvalds [Fri, 25 Jan 2019 22:58:40 +0000 (12:58 -1000)]
Merge tag 'tty-5.0-rc4' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty core and serial driver fixes for
  5.0-rc4 to resolve some reported issues.

  Nothing major, the small serial driver fixes, a tty core fixup for a
  crash that was reported, and some good vt fixes from Nicolas Pitre as
  he seems to be auditing that chunk of code a lot lately.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
  tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
  tty: Handle problem if line discipline does not have receive_buf
  vgacon: unconfuse vc_origin when using soft scrollback
  vt: invoke notifier on screen size change
  vt: always call notifier with the console lock held
  vt: make vt_console_print() compatible with the unicode screen buffer
  tty/n_hdlc: fix __might_sleep warning
  serial: 8250: Fix serial8250 initialization crash
  uart: Fix crash in uart_write and uart_put_char

16 months agoMerge tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Linus Torvalds [Fri, 25 Jan 2019 22:57:09 +0000 (12:57 -1000)]
Merge tag 'usb-5.0-rc4' of git://git./linux/kernel/git/gregkh/usb

Pull USB/PHY fixes from Greg KH:
 "Here are a number of small USB and PHY driver fixes for 5.0-rc4.

  Nothing major at all, just the usual selection of USB gadget bugfixes,
  some new USB serial driver ids, some SPDX fixes, and some PHY driver
  fixes for reported issues.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: keyspan_usa: add proper SPDX lines for .h files
  USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
  USB: leds: fix regression in usbport led trigger
  usb: chipidea: fix static checker warning for NULL pointer
  MAINTAINERS: email address update in MAINTAINERS entries
  USB: usbip: delete README file
  USB: serial: pl2303: add new PID to support PL2303TB
  usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing
  phy: ath79-usb: Fix the main reset name to match the DT binding
  phy: ath79-usb: Fix the power on error path
  phy: fix build breakage: add PHY_MODE_SATA
  phy: ti: ensure priv is not null before dereferencing it
  USB: serial: ftdi_sio: fix GPIO not working in autosuspend
  usb: gadget: Potential NULL dereference on allocation error
  usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
  usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup
  usb: dwc3: gadget: synchronize_irq dwc irq in suspend
  USB: serial: simple: add Motorola Tetra TPG2200 device id

16 months agoMerge tag 'mac80211-for-davem-2019-01-25' of git://git.kernel.org/pub/scm/linux/kerne...
David S. Miller [Fri, 25 Jan 2019 18:59:36 +0000 (10:59 -0800)]
Merge tag 'mac80211-for-davem-2019-01-25' of git://git./linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just a few small fixes:
 * avoid trying to operate TDLS when not connection,
   this is not valid and led to issues
 * count TTL-dropped frames in mesh better
 * deal with new WiGig channels in regulatory code
 * remove a WARN_ON() that can trigger due to benign
   races during device/driver registration
 * fix nested netlink policy maxattrs (syzkaller)
 * fix hwsim n_limits (syzkaller)
 * propagate __aligned(2) to a surrounding struct
 * return proper error in virt_wifi error path
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agocfg80211: extend range deviation for DMG
Chaitanya Tata [Fri, 18 Jan 2019 21:47:47 +0000 (03:17 +0530)]
cfg80211: extend range deviation for DMG

Recently, DMG frequency bands have been extended till 71GHz, so extend
the range check till 20GHz (45-71GHZ), else some channels will be marked
as disabled.

Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
16 months agocfg80211: reg: remove warn_on for a normal case
Chaitanya Tata [Thu, 24 Jan 2019 10:43:02 +0000 (16:13 +0530)]
cfg80211: reg: remove warn_on for a normal case

If there are simulatenous queries of regdb, then there might be a case
where multiple queries can trigger request_firmware_no_wait and can have
parallel callbacks being executed asynchronously. In this scenario we
might hit the WARN_ON.

So remove the warn_on, as the code already handles multiple callbacks
gracefully.

Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
16 months agomac80211: Add attribute aligned(2) to struct 'action'
Mathieu Malaterre [Thu, 24 Jan 2019 18:19:57 +0000 (19:19 +0100)]
mac80211: Add attribute aligned(2) to struct 'action'

During refactor in commit 9e478066eae4 ("mac80211: fix MU-MIMO
follow-MAC mode") a new struct 'action' was declared with packed
attribute as:

  struct {
          struct ieee80211_hdr_3addr hdr;
          u8 category;
          u8 action_code;
  } __packed action;

But since struct 'ieee80211_hdr_3addr' is declared with an aligned
keyword as:

  struct ieee80211_hdr {
   __le16 frame_control;
   __le16 duration_id;
   u8 addr1[ETH_ALEN];
   u8 addr2[ETH_ALEN];
   u8 addr3[ETH_ALEN];
   __le16 seq_ctrl;
   u8 addr4[ETH_ALEN];
  } __packed __aligned(2);

Solve the ambiguity of placing aligned structure in a packed one by
adding the aligned(2) attribute to struct 'action'.

This removes the following warning (W=1):

  net/mac80211/rx.c:234:2: warning: alignment 1 of 'struct <anonymous>' is less than 2 [-Wpacked-not-aligned]

Cc: Johannes Berg <johannes.berg@intel.com>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
16 months agomac80211: don't initiate TDLS connection if station is not associated to AP
Balaji Pothunoori [Mon, 21 Jan 2019 07:00:43 +0000 (12:30 +0530)]
mac80211: don't initiate TDLS connection if station is not associated to AP

Following call trace is observed while adding TDLS peer entry in driver
during TDLS setup.

Call Trace:
[<c1301476>] dump_stack+0x47/0x61
[<c10537d2>] __warn+0xe2/0x100
[<fa22415f>] ? sta_apply_parameters+0x49f/0x550 [mac80211]
[<c1053895>] warn_slowpath_null+0x25/0x30
[<fa22415f>] sta_apply_parameters+0x49f/0x550 [mac80211]
[<fa20ad42>] ? sta_info_alloc+0x1c2/0x450 [mac80211]
[<fa224623>] ieee80211_add_station+0xe3/0x160 [mac80211]
[<c1876fe3>] nl80211_new_station+0x273/0x420
[<c170f6d9>] genl_rcv_msg+0x219/0x3c0
[<c170f4c0>] ? genl_rcv+0x30/0x30
[<c170ee7e>] netlink_rcv_skb+0x8e/0xb0
[<c170f4ac>] genl_rcv+0x1c/0x30
[<c170e8aa>] netlink_unicast+0x13a/0x1d0
[<c170ec18>] netlink_sendmsg+0x2d8/0x390
[<c16c5acd>] sock_sendmsg+0x2d/0x40
[<c16c6369>] ___sys_sendmsg+0x1d9/0x1e0

Fixing this by allowing TDLS setup request only when we have completed
association.

Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
16 months agonl80211: fix NLA_POLICY_NESTED() arguments
Johannes Berg [Fri, 25 Jan 2019 08:26:32 +0000 (09:26 +0100)]
nl80211: fix NLA_POLICY_NESTED() arguments

syzbot reported an out-of-bounds read when passing certain
malformed messages into nl80211. The specific place where
this happened isn't interesting, the problem is that nested
policy parsing was referring to the wrong maximum attribute
and thus the policy wasn't long enough.

Fix this by referring to the correct attribute. Since this
is really not necessary, I'll come up with a separate patch
to just pass the policy instead of both, in the common case
we can infer the maxattr from the size of the policy array.

Reported-by: syzbot+4157b036c5f4713b1f2f@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
16 months agoibmveth: Do not process frames after calling napi_reschedule
Thomas Falcon [Thu, 24 Jan 2019 17:17:01 +0000 (11:17 -0600)]
ibmveth: Do not process frames after calling napi_reschedule

The IBM virtual ethernet driver's polling function continues
to process frames after rescheduling NAPI, resulting in a warning
if it exhausted its budget. Do not restart polling after calling
napi_reschedule. Instead let frames be processed in the following
instance.

Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agonet: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
Maciej Żenczykowski [Thu, 24 Jan 2019 11:07:02 +0000 (03:07 -0800)]
net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP

__bpf_redirect() and act_mirred checks this boolean
to determine whether to prefix an ethernet header.

Signed-off-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agonet: usb: asix: ax88772_bind return error when hw_reset fail
Zhang Run [Thu, 24 Jan 2019 05:48:49 +0000 (13:48 +0800)]
net: usb: asix: ax88772_bind return error when hw_reset fail

The ax88772_bind() should return error code immediately when the PHY
was not reset properly through ax88772a_hw_reset().
Otherwise, The asix_get_phyid() will block when get the PHY
Identifier from the PHYSID1 MII registers through asix_mdio_read()
due to the PHY isn't ready. Furthermore, it will produce a lot of
error message cause system crash.As follows:
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to send
 software reset: ffffffb9
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
 software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to write
 reg index 0x0000: -71
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to enable
 software MII access
asix 1-1:1.0 (unnamed net_device) (uninitialized): Failed to read
 reg index 0x0000: -71
...

Signed-off-by: Zhang Run <zhang.run@zte.com.cn>
Reviewed-by: Yang Wei <yang.wei9@zte.com.cn>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoMAINTAINERS: Update cavium networking drivers
Sudarsana Reddy Kalluru [Thu, 24 Jan 2019 02:03:20 +0000 (18:03 -0800)]
MAINTAINERS: Update cavium networking drivers

Following Marvell's acquisition of Cavium, we need to update all the
Cavium drivers maintainer's entries to point to our new e-mail addresses.

Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ameen Rahman <Ameen.Rahman@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoMerge tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git...
David S. Miller [Fri, 25 Jan 2019 06:22:17 +0000 (22:22 -0800)]
Merge tag 'hyperv-fixes-signed' of git://git./linux/kernel/git/hyperv/linux

Sasha Levin says:

====================
Hyper-V hv_netvsc commits for 5.0

Three patches from Haiyang Zhang to fix settings hash key using ethtool,
and Adrian Vladu's first patch fixing a few spelling mistakes.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoMerge tag 'linux-can-fixes-for-5.0-20190122' of git://git.kernel.org/pub/scm/linux...
David S. Miller [Fri, 25 Jan 2019 05:52:37 +0000 (21:52 -0800)]
Merge tag 'linux-can-fixes-for-5.0-20190122' of git://git./linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2019-01-22

this is a pull request of 4 patches for net/master.

The first patch by is by Manfred Schlaegl and reverts a patch that caused wrong
warning messages in certain use cases. The next patch is by Oliver Hartkopp for
the bcm that adds sanity checks for the timer value before using it to detect
potential interger overflows. The last two patches are for the flexcan driver,
YueHaibing's patch fixes the the return value in the error path of the
flexcan_setup_stop_mode() function. The second patch is by Uwe Kleine-König and
fixes a NULL pointer deref on older flexcan cores in flexcan_chip_start().
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoMerge branch 'mlx4_core-fixes'
David S. Miller [Fri, 25 Jan 2019 05:48:26 +0000 (21:48 -0800)]
Merge branch 'mlx4_core-fixes'

Tariq Toukan says:

====================
mlx4_core fixes for 5.0-rc

This patchset includes two fixes for the mlx4_core driver.

First patch by Aya fixes inaccurate parsing of some FW fields, mistakenly
including additional (mostly reserved) bits.

Second patch by Jack fixes a wrong (yet harmless) error handling of
calls to copy_to_user() during the CQs init stage.

Series generated against net commit:
49a57857aeea Linux 5.0-rc3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agonet/mlx4_core: Fix error handling when initializing CQ bufs in the driver
Jack Morgenstein [Tue, 22 Jan 2019 13:19:45 +0000 (15:19 +0200)]
net/mlx4_core: Fix error handling when initializing CQ bufs in the driver

Procedure mlx4_init_user_cqes() handles returns by copy_to_user
incorrectly. copy_to_user() returns the number of bytes not copied.
Thus, a non-zero return should be treated as a -EFAULT error
(as is done elsewhere in the kernel). However, mlx4_init_user_cqes()
error handling simply returns the number of bytes not copied
(instead of -EFAULT).

Note, though, that this is a harmless bug: procedure mlx4_alloc_cq()
(which is the only caller of mlx4_init_user_cqes()) treats any
non-zero return as an error, but that returned error value is processed
internally, and not passed further up the call stack.

In addition, fixes the following sparse warning:
warning: incorrect type in argument 1 (different address spaces)
   expected void [noderef] <asn:1>*to
   got void *buf

Fixes: e45678973dcb ("{net, IB}/mlx4: Initialize CQ buffers in the driver when possible")
Reported by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agonet/mlx4_core: Add masking for a few queries on HCA caps
Aya Levin [Tue, 22 Jan 2019 13:19:44 +0000 (15:19 +0200)]
net/mlx4_core: Add masking for a few queries on HCA caps

Driver reads the query HCA capabilities without the corresponding masks.
Without the correct masks, the base addresses of the queues are
unaligned.  In addition some reserved bits were wrongly read.  Using the
correct masks, ensures alignment of the base addresses and allows future
firmware versions safe use of the reserved bits.

Fixes: ab9c17a009ee ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet")
Fixes: 0ff1fb654bec ("{NET, IB}/mlx4: Add device managed flow steering firmware API")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agosctp: set flow sport from saddr only when it's 0
Xin Long [Mon, 21 Jan 2019 18:42:41 +0000 (02:42 +0800)]
sctp: set flow sport from saddr only when it's 0

Now sctp_transport_pmtu() passes transport->saddr into .get_dst() to set
flow sport from 'saddr'. However, transport->saddr is set only when
transport->dst exists in sctp_transport_route().

If sctp_transport_pmtu() is called without transport->saddr set, like
when transport->dst doesn't exists, the flow sport will be set to 0
from transport->saddr, which will cause a wrong route to be got.

Commit 6e91b578bf3f ("sctp: re-use sctp_transport_pmtu in
sctp_transport_route") made the issue be triggered more easily
since sctp_transport_pmtu() would be called in sctp_transport_route()
after that.

In gerneral, fl4->fl4_sport should always be set to
htons(asoc->base.bind_addr.port), unless transport->asoc doesn't exist
in sctp_v4/6_get_dst(), which is the case:

  sctp_ootb_pkt_new() ->
    sctp_transport_route()

For that, we can simply handle it by setting flow sport from saddr only
when it's 0 in sctp_v4/6_get_dst().

Fixes: 6e91b578bf3f ("sctp: re-use sctp_transport_pmtu in sctp_transport_route")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agosctp: set chunk transport correctly when it's a new asoc
Xin Long [Mon, 21 Jan 2019 18:42:09 +0000 (02:42 +0800)]
sctp: set chunk transport correctly when it's a new asoc

In the paths:

  sctp_sf_do_unexpected_init() ->
    sctp_make_init_ack()
  sctp_sf_do_dupcook_a/b()() ->
    sctp_sf_do_5_1D_ce()

The new chunk 'retval' transport is set from the incoming chunk 'chunk'
transport. However, 'retval' transport belong to the new asoc, which
is a different one from 'chunk' transport's asoc.

It will cause that the 'retval' chunk gets set with a wrong transport.
Later when sending it and because of Commit b9fd683982c9 ("sctp: add
sctp_packet_singleton"), sctp_packet_singleton() will set some fields,
like vtag to 'retval' chunk from that wrong transport's asoc.

This patch is to fix it by setting 'retval' transport correctly which
belongs to the right asoc in sctp_make_init_ack() and
sctp_sf_do_5_1D_ce().

Fixes: b9fd683982c9 ("sctp: add sctp_packet_singleton")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agosctp: improve the events for sctp stream adding
Xin Long [Mon, 21 Jan 2019 18:40:12 +0000 (02:40 +0800)]
sctp: improve the events for sctp stream adding

This patch is to improve sctp stream adding events in 2 places:

  1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM
     and in stream allocation failure checks, as the adding has to
     succeed after reconf_timer stops for the in stream adding
     request retransmission.

  3. In sctp_process_strreset_addstrm_in(), no event should be sent,
     as no in or out stream is added here.

Fixes: 50a41591f110 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter")
Fixes: c5c4ebb3ab87 ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agosctp: improve the events for sctp stream reset
Xin Long [Mon, 21 Jan 2019 18:39:34 +0000 (02:39 +0800)]
sctp: improve the events for sctp stream reset

This patch is to improve sctp stream reset events in 4 places:

  1. In sctp_process_strreset_outreq(), the flag should always be set with
     SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in
     stream is reset here.
  2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN
     check, as the reset has to succeed after reconf_timer stops for the
     in stream reset request retransmission.
  3. In sctp_process_strreset_inreq(), no event should be sent, as no in
     or out stream is reset here.
  4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or
     OUTGOING event should always be sent for stream reset requests, no
     matter it fails or succeeds to process the request.

Fixes: 810544764536 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter")
Fixes: 16e1a91965b0 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter")
Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter")
Reported-by: Ying Xu <yinxu@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
wenxu [Sat, 19 Jan 2019 05:11:25 +0000 (13:11 +0800)]
ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel

ip l add dev tun type gretap key 1000
ip a a dev tun 10.0.0.1/24

Packets with tun-id 1000 can be recived by tun dev. But packet can't
be sent through dev tun for non-tunnel-dst

With this patch: tunnel-dst can be get through lwtunnel like beflow:
ip r a 10.0.0.7 encap ip dst 172.168.0.11 dev tun

Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoMerge tag 'drm-fixes-2019-01-25-1' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Thu, 24 Jan 2019 23:19:10 +0000 (12:19 +1300)]
Merge tag 'drm-fixes-2019-01-25-1' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "Live from LCA pull, some fixes all over the place,

  i915:
   - GVT workload destruction fix

  msm:
   - A6XX opp-level fix
   - build fixes
   - hard-coded irq removal

  amdgpu:
   - overclocking fix
   - hybrid gfx fix

  sun4i:
   - fix TMDS clock usage"

* tag 'drm-fixes-2019-01-25-1' of git://anongit.freedesktop.org/drm/drm:
  drm/msm: avoid unused function warning
  drm/msm: Add __printf verification
  drm/msm: Fix A6XX support for opp-level
  drm/msm: honor GPU_READONLY flag
  drm/msm: drop interrupt-names
  drm/msm/gpu: Remove hardcoded interrupt name
  drm/msm/gpu: fix building without debugfs
  drm/i915/execlists: Mark up priority boost on preemption
  drm/i915/gvt: release shadow batch buffer and wa_ctx before destroy one workload
  drm/sun4i: hdmi: Fix usage of TMDS clock
  drm/amd/powerplay: OD setting fix on Vega10
  drm/amdgpu: Add APTX quirk for Lenovo laptop
  drm/msm: Unblock writer if reader closes file

16 months agoMerge tag 'drm-msm-fixes-2019-01-24' of git://people.freedesktop.org/~robclark/linux...
Dave Airlie [Thu, 24 Jan 2019 21:44:53 +0000 (07:44 +1000)]
Merge tag 'drm-msm-fixes-2019-01-24' of git://people.freedesktop.org/~robclark/linux into drm-fixes

A few fixes for v5.0.. the opp-level fix and removal of hard-coded irq
name is partially to make things smoother in v5.1 merge window to
avoid dependency on drm vs dt trees, but are otherwise sane changes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsAEHd2tGRQxRTs+A-8y_tthPs2iUgCCCEwR5vDMXab4A@mail.gmail.com
16 months agoMerge tag 'drm-intel-fixes-2019-01-24' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Thu, 24 Jan 2019 20:57:45 +0000 (06:57 +1000)]
Merge tag 'drm-intel-fixes-2019-01-24' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.0-rc4:
- fix priority boost
- gvt: fix destroy of shadow batch and indirect ctx

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87k1iu1a2e.fsf@intel.com
16 months agoMerge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Thu, 24 Jan 2019 20:53:16 +0000 (06:53 +1000)]
Merge branch 'drm-fixes-5.0' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

- Overclock fix for vega10
- Hybrid gfx laptop fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123231004.3111-1-alexander.deucher@amd.com
16 months agocifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData 5.0-rc3-smb3-fixes
Ronnie Sahlberg [Thu, 24 Jan 2019 06:19:31 +0000 (16:19 +1000)]
cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData

Was helpful in debug for some recent problems.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agosmb3: add credits we receive from oplock/break PDUs
Ronnie Sahlberg [Wed, 23 Jan 2019 06:20:38 +0000 (16:20 +1000)]
smb3: add credits we receive from oplock/break PDUs

Otherwise we gradually leak credits leading to potential
hung session.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agoCIFS: Fix mounts if the client is low on credits
Pavel Shilovsky [Wed, 16 Jan 2019 19:48:42 +0000 (11:48 -0800)]
CIFS: Fix mounts if the client is low on credits

If the server doesn't grant us at least 3 credits during the mount
we won't be able to complete it because query path info operation
requires 3 credits. Use the cached file handle if possible to allow
the mount to succeed.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agoCIFS: Do not assume one credit for async responses
Pavel Shilovsky [Tue, 15 Jan 2019 23:08:48 +0000 (15:08 -0800)]
CIFS: Do not assume one credit for async responses

If we don't receive a response we can't assume that the server
granted one credit. Assume zero credits in such cases.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agoCIFS: Fix credit calculations in compound mid callback
Pavel Shilovsky [Wed, 23 Jan 2019 00:50:21 +0000 (16:50 -0800)]
CIFS: Fix credit calculations in compound mid callback

The current code doesn't do proper accounting for credits
in SMB1 case: it adds one credit per response only if we get
a complete response while it needs to return it unconditionally.
Fix this and also include malformed responses for SMB2+ into
accounting for credits because such responses have Credit
Granted field, thus nothing prevents to get a proper credit
value from them.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agoCIFS: Fix credit calculation for encrypted reads with errors
Pavel Shilovsky [Fri, 18 Jan 2019 23:38:11 +0000 (15:38 -0800)]
CIFS: Fix credit calculation for encrypted reads with errors

We do need to account for credits received in error responses
to read requests on encrypted sessions.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agoCIFS: Fix credits calculations for reads with errors
Pavel Shilovsky [Thu, 17 Jan 2019 23:29:26 +0000 (15:29 -0800)]
CIFS: Fix credits calculations for reads with errors

Currently we mark MID as malformed if we get an error from server
in a read response. This leads to not properly processing credits
in the readv callback. Fix this by marking such a response as
normal received response and process it appropriately.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agoCIFS: Do not reconnect TCP session in add_credits()
Pavel Shilovsky [Sat, 19 Jan 2019 01:25:36 +0000 (17:25 -0800)]
CIFS: Do not reconnect TCP session in add_credits()

When executing add_credits() we currently call cifs_reconnect()
if the number of credits is zero and there are no requests in
flight. In this case we may call cifs_reconnect() recursively
twice and cause memory corruption given the following sequence
of functions:

mid1.callback() -> add_credits() -> cifs_reconnect() ->
-> mid2.callback() -> add_credits() -> cifs_reconnect().

Fix this by avoiding to call cifs_reconnect() in add_credits()
and checking for zero credits in the demultiplex thread.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agoMerge tag 'drm-misc-fixes-2019-01-24' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Thu, 24 Jan 2019 20:46:51 +0000 (06:46 +1000)]
Merge tag 'drm-misc-fixes-2019-01-24' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-fixes for v5.0-rc4:
- Small refcounting fix to sun4i's HDMI support.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/588e9ecb-d80d-2cc6-254e-e5311f04224f@linux.intel.com
16 months agodrm/msm: avoid unused function warning
Arnd Bergmann [Thu, 10 Jan 2019 14:14:03 +0000 (15:14 +0100)]
drm/msm: avoid unused function warning

drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:368:13: error: 'dpu_plane_danger_signal_ctrl' defined but not used [-Werror=unused-function]

Fixes: 7b2e7adea732 ("drm/msm/dpu: Make dpu_plane_danger_signal_ctrl void")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
16 months agodrm/msm: Add __printf verification
Joe Perches [Thu, 17 Jan 2019 22:17:36 +0000 (14:17 -0800)]
drm/msm: Add __printf verification

Add a few __printf attribute specifiers to routines that
could use them.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
16 months agodrm/msm: Fix A6XX support for opp-level
Douglas Anderson [Wed, 16 Jan 2019 18:46:21 +0000 (10:46 -0800)]
drm/msm: Fix A6XX support for opp-level

The bindings for Qualcomm opp levels changed after being Acked but
before landing.  Thus the code in the GPU driver that was relying on
the old bindings is now broken.

Let's change the code to match the new bindings by adjusting the old
string 'qcom,level' to the new string 'opp-level'.  See the patch
("dt-bindings: opp: Introduce opp-level bindings").

NOTE: we will do additional cleanup to totally remove the string from
the code and use the new dev_pm_opp_get_level() but we'll do it in a
future patch.  This will facilitate getting the important code fix in
sooner without having to deal with cross-maintainer dependencies.

This patch needs to land before the patch ("arm64: dts: sdm845: Add
gpu and gmu device nodes") since if a tree contains the device tree
patch but not this one you'll get a crash at bootup.

Fixes: 4b565ca5a2cb ("drm/msm: Add A6XX device support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
16 months agodrm/msm: honor GPU_READONLY flag
Rob Clark [Wed, 9 Jan 2019 19:25:05 +0000 (14:25 -0500)]
drm/msm: honor GPU_READONLY flag

Signed-off-by: Rob Clark <robdclark@gmail.com>
16 months agodrm/msm: drop interrupt-names
Jordan Crouse [Tue, 18 Dec 2018 18:32:37 +0000 (11:32 -0700)]
drm/msm: drop interrupt-names

Each GPU core only uses one interrupt so we don't to look up
an interrupt by name and thereby we don't need interrupt-names.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
16 months agodrm/msm/gpu: Remove hardcoded interrupt name
Jordan Crouse [Tue, 18 Dec 2018 18:32:36 +0000 (11:32 -0700)]
drm/msm/gpu: Remove hardcoded interrupt name

Every GPU core only has one interrupt so there isn't any
value in looking up the interrupt by name. Remove the name (which
is legacy anyway) and use platform_get_irq() instead.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
16 months agodrm/msm/gpu: fix building without debugfs
Arnd Bergmann [Mon, 13 Aug 2018 21:23:44 +0000 (23:23 +0200)]
drm/msm/gpu: fix building without debugfs

When debugfs is disabled, but coredump is turned on, the adreno driver fails to build:

drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
   .show = adreno_show,
    ^~~~
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base')
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: error: initialization of 'void (*)(struct msm_gpu *, struct msm_gem_submit *, struct msm_file_private *)' from incompatible pointer type 'void (*)(struct msm_gpu *, struct msm_gpu_state *, struct drm_printer *)' [-Werror=incompatible-pointer-types]
drivers/gpu/drm/msm/adreno/a3xx_gpu.c:460:11: note: (near initialization for 'funcs.base.submit')
drivers/gpu/drm/msm/adreno/a4xx_gpu.c:546:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a5xx_gpu.c:1460:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/adreno/a6xx_gpu.c:769:4: error: 'struct msm_gpu_funcs' has no member named 'show'
drivers/gpu/drm/msm/msm_gpu.c: In function 'msm_gpu_devcoredump_read':
drivers/gpu/drm/msm/msm_gpu.c:289:12: error: 'const struct msm_gpu_funcs' has no member named 'show'

Adjust the #ifdef to make it build again.

Fixes: c0fec7f562ec ("drm/msm/gpu: Capture the GPU state on a GPU hang")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
16 months agoMerge tag 'for-5.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device...
Linus Torvalds [Thu, 24 Jan 2019 20:07:18 +0000 (09:07 +1300)]
Merge tag 'for-5.0/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM crypt's parsing of extended IV arguments.

 - Fix DM thinp's discard passdown to properly account for extra
   reference that is taken to guard against reallocating a block before
   a discard has been issued.

 - Fix bio-based DM's redundant IO accounting that was occurring for
   bios that must be split due to the nature of the DM target (e.g.
   dm-stripe, dm-thinp, etc).

* tag 'for-5.0/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: add missing trace_block_split() to __split_and_process_bio()
  dm: fix dm_wq_work() to only use __split_and_process_bio() if appropriate
  dm: fix redundant IO accounting for bios that need splitting
  dm: fix clone_bio() to trigger blk_recount_segments()
  dm thin: fix passdown_double_checking_shared_status()
  dm crypt: fix parsing of extended IV arguments

16 months agoblock: Fix comment typo
Damien Le Moal [Thu, 24 Jan 2019 09:20:14 +0000 (18:20 +0900)]
block: Fix comment typo

Fix typo in REQ_OP_ZONE_RESET description.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
16 months agouapi: fix ioctl documentation
Damien Le Moal [Thu, 24 Jan 2019 09:20:13 +0000 (18:20 +0900)]
uapi: fix ioctl documentation

The description of the BLKGETNRZONES zoned block device ioctl was not
added as a comment together with this ioctl definition in commit
65e4e3eee83d7 ("block: Introduce BLKGETNRZONES ioctl"). Add its
description here.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
16 months agoblk-wbt: Declare local functions static
Bart Van Assche [Wed, 23 Jan 2019 19:05:57 +0000 (11:05 -0800)]
blk-wbt: Declare local functions static

This patch avoids that sparse reports the following warnings:

  CHECK   block/blk-wbt.c
block/blk-wbt.c:600:6: warning: symbol 'wbt_issue' was not declared. Should it be static?
block/blk-wbt.c:620:6: warning: symbol 'wbt_requeue' was not declared. Should it be static?
  CC      block/blk-wbt.o
block/blk-wbt.c:600:6: warning: no previous prototype for wbt_issue [-Wmissing-prototypes]
 void wbt_issue(struct rq_qos *rqos, struct request *rq)
      ^~~~~~~~~
block/blk-wbt.c:620:6: warning: no previous prototype for wbt_requeue [-Wmissing-prototypes]
 void wbt_requeue(struct rq_qos *rqos, struct request *rq)
      ^~~~~~~~~~~

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
16 months agoMerge tag 'fsnotify_for_v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 24 Jan 2019 17:03:24 +0000 (06:03 +1300)]
Merge tag 'fsnotify_for_v5.0-rc4' of git://git./linux/kernel/git/jack/linux-fs

Pull inotify fix from Jan Kara:
 "Fix a file refcount leak in an inotify error path"

* tag 'fsnotify_for_v5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  inotify: Fix fd refcount leak in inotify_add_watch().

16 months agoMerge tag 'ceph-for-5.0-rc4' of git://github.com/ceph/ceph-client
Linus Torvalds [Thu, 24 Jan 2019 16:59:22 +0000 (05:59 +1300)]
Merge tag 'ceph-for-5.0-rc4' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "A fix for a potential use-after-free, a patch to close a (mostly
  benign) race in the messenger and a licence clarification for quota.c"

* tag 'ceph-for-5.0-rc4' of git://github.com/ceph/ceph-client:
  ceph: quota: cleanup license mess
  libceph: avoid KEEPALIVE_PENDING races in ceph_con_keepalive()
  ceph: clear inode pointer when snap realm gets dropped by its inode

16 months agoMerge tag 'sound-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Thu, 24 Jan 2019 16:55:26 +0000 (05:55 +1300)]
Merge tag 'sound-5.0-rc4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A significant amount of fixes at this time, mostly for covering the
  recent ASoC issues.

   - Fixes for the missing ASoC driver initialization with non-deferred
     probes; these triggered other problems in chain, which resulted in
     yet more fix commits

   - DaVinci runtime PM fix; the diff looks large but it's just a code
     shuffling

   - Various fixes for ASoC Intel drivers: a regression in HD-A HDMI,
     Kconfig dependency, machine driver adjustments, PLL fix.

   - Other ASoC driver-specific stuff including the trivial fixes caught
     by static analysis

   - Usual HD-audio quirks"

* tag 'sound-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
  ALSA: hda - Add mute LED support for HP ProBook 470 G5
  ASoC: amd: Fix potential NULL pointer dereference
  ASoC: imx-audmux: change snprintf to scnprintf for possible overflow
  ASoC: rt5514-spi: Fix potential NULL pointer dereference
  ASoC: dapm: change snprintf to scnprintf for possible overflow
  ASoC: rt5682: Fix PLL source register definitions
  ASoC: core: Don't defer probe on optional, NULL components
  ASoC: core: Make snd_soc_find_component() more robust
  ASoC: soc-core: fix init platform memory handling
  ASoC: intel: skl: Fix display power regression
  ALSA: hda/realtek - Fix typo for ALC225 model
  ASoC: soc-core: Hold client_mutex around soc_init_dai_link()
  ASoC: Intel: Boards: move the codec PLL configuration to _init
  ASoC: soc-core: defer card probe until all component is added to list
  ASoC: atom: fix a missing check of snd_pcm_lib_malloc_pages
  ASoC: tlv320aic32x4: Kernel OOPS while entering DAPM standby mode
  ASoC: ti: davinci-mcasp: Move context save/restore to runtime_pm callbacks
  ASoC: Variable "val" in function rt274_i2c_probe() could be uninitialized
  ASoC: rt5682: Fix recording no sound issue
  ASoC: Intel: atom: Make PCI dependency explicit
  ...

16 months agoblk-mq: fix the cmd_flag_name array
Jianchao Wang [Thu, 24 Jan 2019 10:28:55 +0000 (18:28 +0800)]
blk-mq: fix the cmd_flag_name array

Swap REQ_NOWAIT and REQ_NOUNMAP and add REQ_HIPRI.

Acked-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
16 months agosmb3: Cleanup license mess
Thomas Gleixner [Thu, 17 Jan 2019 23:14:23 +0000 (00:14 +0100)]
smb3: Cleanup license mess

Precise and non-ambiguous license information is important. The recently
added aegis header file has a SPDX license identifier, which is nice, but
at the same time it has a contradictionary license boiler plate text.

  SPDX-License-Identifier: GPL-2.0

versus

  *   This program is free software;  you can redistribute it and/or modify
  *   it under the terms of the GNU General Public License as published by
  *   the Free Software Foundation; either version 2 of the License, or
  *   (at your option) any later version.

Oh well.

Assuming that the SPDX identifier is correct and according to x86/hyper-v
contributions from Microsoft GPL V2 only is the usual license.

Remove the boiler plate as it is wrong and even if correct it is redundant.

Fixes: eccb4422cf97 ("smb3: Add ftrace tracepoints for improved SMB3 debugging")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steve French <sfrench@samba.org>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agoCIFS: Fix possible hang during async MTU reads and writes
Pavel Shilovsky [Thu, 17 Jan 2019 16:21:24 +0000 (08:21 -0800)]
CIFS: Fix possible hang during async MTU reads and writes

When doing MTU i/o we need to leave some credits for
possible reopen requests and other operations happening
in parallel. Currently we leave 1 credit which is not
enough even for reopen only: we need at least 2 credits
if durable handle reconnect fails. Also there may be
other operations at the same time including compounding
ones which require 3 credits at a time each. Fix this
by leaving 8 credits which is big enough to cover most
scenarios.

Was able to reproduce this when server was configured
to give out fewer credits than usual.

The proper fix would be to reconnect a file handle first
and then obtain credits for an MTU request but this leads
to bigger code changes and should happen in other patches.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
16 months agocifs: fix memory leak of an allocated cifs_ntsd structure
Colin Ian King [Wed, 16 Jan 2019 16:28:59 +0000 (16:28 +0000)]
cifs: fix memory leak of an allocated cifs_ntsd structure

The call to SMB2_queary_acl can allocate memory to pntsd and also
return a failure via a call to SMB2_query_acl (and then query_info).
This occurs when query_info allocates the structure and then in
query_info the call to smb2_validate_and_copy_iov fails. Currently the
failure just returns without kfree'ing pntsd hence causing a memory
leak.

Currently, *data is allocated if it's not already pointing to a buffer,
so it needs to be kfree'd only if was allocated in query_info, so the
fix adds an allocated flag to track this.  Also set *dlen to zero on
an error just to be safe since *data is kfree'd.

Also set errno to -ENOMEM if the allocation of *data fails.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Dan Carpener <dan.carpenter@oracle.com>
16 months agoMerge tag 'gvt-fixes-2019-01-24' of https://github.com/intel/gvt-linux into drm-intel...
Jani Nikula [Thu, 24 Jan 2019 08:41:34 +0000 (10:41 +0200)]
Merge tag 'gvt-fixes-2019-01-24' of https://github.com/intel/gvt-linux into drm-intel-fixes

gvt-fixes-2019-01-24

- Fix destroy of shadow batch and indirect ctx (Weinan)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124054801.GP7203@zhen-hp.sh.intel.com
16 months agodrm/i915/execlists: Mark up priority boost on preemption
Chris Wilson [Wed, 23 Jan 2019 13:51:55 +0000 (13:51 +0000)]
drm/i915/execlists: Mark up priority boost on preemption

Record the priority boost we giving to the preempted client or else we
may end up in a situation where the priority queue no longer matches the
request priority order and so we can end up in an infinite loop of
preempting the same pair of requests.

Fixes: e9eaf82d97a2 ("drm/i915: Priority boost for waiting clients")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190123135155.21562-1-chris@chris-wilson.co.uk
(cherry picked from commit 6e062b60b0b1bd82cac475e63cdb8c451647182b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
16 months agonvme-multipath: drop optimization for static ANA group IDs
Hannes Reinecke [Wed, 9 Jan 2019 08:45:15 +0000 (09:45 +0100)]
nvme-multipath: drop optimization for static ANA group IDs

Bit 6 in the ANACAP field is used to indicate that the ANA group ID
doesn't change while the namespace is attached to the controller.
There is an optimisation in the code to only allocate space
for the ANA group header, as the namespace list won't change and
hence would not need to be refreshed.
However, this optimisation was never carried over to the actual
workflow, which always assumes that the buffer is large enough
to hold the ANA header _and_ the namespace list.
So drop this optimisation and always allocate enough space.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
16 months agonvmet-rdma: fix null dereference under heavy load
Raju Rangoju [Thu, 3 Jan 2019 17:35:31 +0000 (23:05 +0530)]
nvmet-rdma: fix null dereference under heavy load

Under heavy load if we don't have any pre-allocated rsps left, we
dynamically allocate a rsp, but we are not actually allocating memory
for nvme_completion (rsp->req.rsp). In such a case, accessing pointer
fields (req->rsp->status) in nvmet_req_init() will result in crash.

To fix this, allocate the memory for nvme_completion by calling
nvmet_rdma_alloc_rsp()

Fixes: 8407879c("nvmet-rdma:fix possible bogus dereference under heavy load")

Cc: <stable@vger.kernel.org>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
16 months agonvme-rdma: rework queue maps handling
Sagi Grimberg [Sat, 19 Jan 2019 00:43:24 +0000 (16:43 -0800)]
nvme-rdma: rework queue maps handling

If the device supports less queues than provided (if the device has less
completion vectors), we might hit a bug due to the fact that we ignore
that in nvme_rdma_map_queues (we override the maps nr_queues with user
opts).

Instead, keep track of how many default/read/poll queues we actually
allocated (rather than asked by the user) and use that to assign our
queue mappings.

Fixes: b65bb777ef22 (" nvme-rdma: support separate queue maps for read and write")
Reported-by: Saleem, Shiraz <shiraz.saleem@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
16 months agonvme-tcp: fix timeout handler
Sagi Grimberg [Tue, 8 Jan 2019 09:01:30 +0000 (01:01 -0800)]
nvme-tcp: fix timeout handler

Currently, we have several problems with the timeout
handler:
1. If we timeout on the controller establishment flow, we will hang
because we don't execute the error recovery (and we shouldn't because
the create_ctrl flow needs to fail and cleanup on its own)
2. We might also hang if we get a disconnet on a queue while the
controller is already deleting. This racy flow can cause the controller
disable/shutdown admin command to hang.

We cannot complete a timed out request from the timeout handler without
mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work).
So we serialize it in the timeout handler and teardown io and admin
queues to guarantee that no one races with us from completing the
request.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
16 months agonvme-rdma: fix timeout handler
Sagi Grimberg [Tue, 8 Jan 2019 08:53:22 +0000 (00:53 -0800)]
nvme-rdma: fix timeout handler

Currently, we have several problems with the timeout
handler:
1. If we timeout on the controller establishment flow, we will hang
because we don't execute the error recovery (and we shouldn't because
the create_ctrl flow needs to fail and cleanup on its own)
2. We might also hang if we get a disconnet on a queue while the
controller is already deleting. This racy flow can cause the controller
disable/shutdown admin command to hang.

We cannot complete a timed out request from the timeout handler without
mutual exclusion from the teardown flow (e.g. nvme_rdma_error_recovery_work).
So we serialize it in the timeout handler and teardown io and admin
queues to guarantee that no one races with us from completing the
request.

Reported-by: Jaesoo Lee <jalee@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
16 months agoRevert "Change mincore() to count "mapped" pages rather than "cached" pages"
Linus Torvalds [Wed, 23 Jan 2019 20:04:37 +0000 (09:04 +1300)]
Revert "Change mincore() to count "mapped" pages rather than "cached" pages"

This reverts commit 574823bfab82d9d8fa47f422778043fbb4b4f50e.

It turns out that my hope that we could just remove the code that
exposes the cache residency status from mincore() was too optimistic.

There are various random users that want it, and one example would be
the Netflix database cluster maintenance. To quote Josh Snyder:

 "For Netflix, losing accurate information from the mincore syscall
  would lengthen database cluster maintenance operations from days to
  months. We rely on cross-process mincore to migrate the contents of a
  page cache from machine to machine, and across reboots.

  To do this, I wrote and maintain happycache [1], a page cache
  dumper/loader tool. It is quite similar in architecture to pgfincore,
  except that it is agnostic to workload. The gist of happycache's
  operation is "produce a dump of residence status for each page, do
  some operation, then reload exactly the same pages which were present
  before." happycache is entirely dependent on accurate reporting of the
  in-core status of file-backed pages, as accessed by another process.

  We primarily use happycache with Cassandra, which (like Postgres +
  pgfincore) relies heavily on OS page cache to reduce disk accesses.
  Because our workloads never experience a cold page cache, we are able
  to provision hardware for a peak utilization level that is far lower
  than the hypothetical "every query is a cache miss" peak.

  A database warmed by happycache can be ready for service in seconds
  (bounded only by the performance of the drives and the I/O subsystem),
  with no period of in-service degradation. By contrast, putting a
  database in service without a page cache entails a potentially
  unbounded period of degradation (at Netflix, the time to populate a
  single node's cache via natural cache misses varies by workload from
  hours to weeks). If a single node upgrade were to take weeks, then
  upgrading an entire cluster would take months. Since we want to apply
  security upgrades (and other things) on a somewhat tighter schedule,
  we would have to develop more complex solutions to provide the same
  functionality already provided by mincore.

  At the bottom line, happycache is designed to benignly exploit the
  same information leak documented in the paper [2]. I think it makes
  perfect sense to remove cross-process mincore functionality from
  unprivileged users, but not to remove it entirely"

We do have an alternate approach that limits the cache residency
reporting only to processes that have write permissions to the file, so
we can fix the original information leak issue that way.  It involves
_adding_ code rather than removing it, which is sad, but hey, at least
we haven't found any users that would find the restrictions
unacceptable.

So revert the optimistic first approach to make room for that alternate
fix instead.

Reported-by: Josh Snyder <joshs@netflix.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Kevin Easton <kevin@guarana.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Cyril Hrubis <chrubis@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Daniel Gruss <daniel@gruss.cc>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
16 months agoMerge tag 'for-linus-5.0' of git://github.com/cminyard/linux-ipmi
Linus Torvalds [Wed, 23 Jan 2019 20:00:19 +0000 (09:00 +1300)]
Merge tag 'for-linus-5.0' of git://github.com/cminyard/linux-ipmi

Pull IPMI fixes from Corey Minyard:
 "I missed the merge window, which wasn't really important at the time
  as there was nothing that critical that I had for 5.0.

  However, I say that,and then a number of critical fixes come in:

   - ipmi: fix use-after-free of user->release_barrier.rda
   - ipmi: Prevent use-after-free in deliver_response
   - ipmi: msghandler: Fix potential Spectre v1 vulnerabilities

  which are obvious candidates for 5.0.  Then there is:

   - ipmi:ssif: Fix handling of multi-part return messages

  which is less critical, but it still has some off-by-one things that
  are not great, so it seemed appropriate. Some machines are broken
  without it. Then:

   - ipmi: Don't initialize anything in the core until something uses it

  It turns out that using SRCU causes large chunks of memory to be used
  on big iron machines, even if IPMI is never used. This was causing
  some issues for people on those machines.

  Everything here is destined for stable"

* tag 'for-linus-5.0' of git://github.com/cminyard/linux-ipmi:
  ipmi: Don't initialize anything in the core until something uses it
  ipmi: fix use-after-free of user->release_barrier.rda
  ipmi: Prevent use-after-free in deliver_response
  ipmi: msghandler: Fix potential Spectre v1 vulnerabilities
  ipmi:ssif: Fix handling of multi-part return messages

16 months agoMerge tag 's390-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Wed, 23 Jan 2019 19:58:01 +0000 (08:58 +1300)]
Merge tag 's390-5.0-2' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Martin Schwidefsky:

 - Do not claim to run under z/VM if the hypervisor can not be
   identified

 - Fix crashes due to outdated ASCEs in CR1

 - Avoid a deadlock in regard to CPU hotplug

 - Really fix the vdso mapping issue for compat tasks

 - Avoid crash on restart due to an incorrect stack address

* tag 's390-5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/smp: Fix calling smp_call_ipl_cpu() from ipl CPU
  s390/vdso: correct vdso mapping for compat tasks
  s390/smp: fix CPU hotplug deadlock with CPU rescan
  s390/mm: always force a load of the primary ASCE on context switch
  s390/early: improve machine detection

16 months agoax25: fix possible use-after-free
Eric Dumazet [Tue, 22 Jan 2019 18:40:59 +0000 (10:40 -0800)]
ax25: fix possible use-after-free

syzbot found that ax25 routes where not properly protected
against concurrent use [1].

In this particular report the bug happened while
copying ax25->digipeat.

Fix this problem by making sure we call ax25_get_route()
while ax25_route_lock is held, so that no modification
could happen while using the route.

The current two ax25_get_route() callers do not sleep,
so this change should be fine.

Once we do that, ax25_get_route() no longer needs to
grab a reference on the found route.

[1]
ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
BUG: KASAN: use-after-free in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: use-after-free in kmemdup+0x42/0x60 mm/util.c:113
Read of size 66 at addr ffff888066641a80 by task syz-executor2/531

ax25_connect(): syz-executor0 uses autobind, please contact jreuter@yaina.de
CPU: 1 PID: 531 Comm: syz-executor2 Not tainted 5.0.0-rc2+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1db/0x2d0 lib/dump_stack.c:113
 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
 check_memory_region_inline mm/kasan/generic.c:185 [inline]
 check_memory_region+0x123/0x190 mm/kasan/generic.c:191
 memcpy+0x24/0x50 mm/kasan/common.c:130
 memcpy include/linux/string.h:352 [inline]
 kmemdup+0x42/0x60 mm/util.c:113
 kmemdup include/linux/string.h:425 [inline]
 ax25_rt_autobind+0x25d/0x750 net/ax25/ax25_route.c:424
 ax25_connect.cold+0x30/0xa4 net/ax25/af_ax25.c:1224
 __sys_connect+0x357/0x490 net/socket.c:1664
 __do_sys_connect net/socket.c:1675 [inline]
 __se_sys_connect net/socket.c:1672 [inline]
 __x64_sys_connect+0x73/0xb0 net/socket.c:1672
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458099
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f870ee22c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458099
RDX: 0000000000000048 RSI: 0000000020000080 RDI: 0000000000000005
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f870ee236d4
R13: 00000000004be48e R14: 00000000004ce9a8 R15: 00000000ffffffff

Allocated by task 526:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_kmalloc mm/kasan/common.c:496 [inline]
 __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:469
 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:504
ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3609
 kmalloc include/linux/slab.h:545 [inline]
 ax25_rt_add net/ax25/ax25_route.c:95 [inline]
 ax25_rt_ioctl+0x3b9/0x1270 net/ax25/ax25_route.c:233
 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
 sock_do_ioctl+0xe2/0x400 net/socket.c:950
 sock_ioctl+0x32f/0x6c0 net/socket.c:1074
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

ax25_connect(): syz-executor5 uses autobind, please contact jreuter@yaina.de
Freed by task 550:
 save_stack+0x45/0xd0 mm/kasan/common.c:73
 set_track mm/kasan/common.c:85 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/common.c:458
 kasan_slab_free+0xe/0x10 mm/kasan/common.c:466
 __cache_free mm/slab.c:3487 [inline]
 kfree+0xcf/0x230 mm/slab.c:3806
 ax25_rt_add net/ax25/ax25_route.c:92 [inline]
 ax25_rt_ioctl+0x304/0x1270 net/ax25/ax25_route.c:233
 ax25_ioctl+0x322/0x10b0 net/ax25/af_ax25.c:1763
 sock_do_ioctl+0xe2/0x400 net/socket.c:950
 sock_ioctl+0x32f/0x6c0 net/socket.c:1074
 vfs_ioctl fs/ioctl.c:46 [inline]
 file_ioctl fs/ioctl.c:509 [inline]
 do_vfs_ioctl+0x107b/0x17d0 fs/ioctl.c:696
 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713
 __do_sys_ioctl fs/ioctl.c:720 [inline]
 __se_sys_ioctl fs/ioctl.c:718 [inline]
 __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718
 do_syscall_64+0x1a3/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff888066641a80
 which belongs to the cache kmalloc-96 of size 96
The buggy address is located 0 bytes inside of
 96-byte region [ffff888066641a80ffff888066641ae0)
The buggy address belongs to the page:
page:ffffea0001999040 count:1 mapcount:0 mapping:ffff88812c3f04c0 index:0x0
flags: 0x1fffc0000000200(slab)
ax25_connect(): syz-executor4 uses autobind, please contact jreuter@yaina.de
raw: 01fffc0000000200 ffffea0001817948 ffffea0002341dc8 ffff88812c3f04c0
raw: 0000000000000000 ffff888066641000 0000000100000020 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff888066641980: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff888066641a00: 00 00 00 00 00 00 00 00 02 fc fc fc fc fc fc fc
>ffff888066641a80: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
                   ^
 ffff888066641b00: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc
 ffff888066641b80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agosfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
Edward Cree [Tue, 22 Jan 2019 19:02:17 +0000 (19:02 +0000)]
sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe

Use a bitmap to keep track of which partition types we've already seen;
 for duplicates, return -EEXIST from efx_ef10_mtd_probe_partition() and
 thus skip adding that partition.
Duplicate partitions occur because of the A/B backup scheme used by newer
 sfc NICs.  Prior to this patch they cause sysfs_warn_dup errors because
 they have the same name, causing us not to expose any MTDs at all.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agohv_netvsc: fix typos in code comments
Adrian Vladu [Thu, 3 Jan 2019 19:43:08 +0000 (19:43 +0000)]
hv_netvsc: fix typos in code comments

Fix all typos from hyperv netvsc code comments.

Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Alessandro Pilotti" <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
16 months agohv_netvsc: Fix hash key value reset after other ops
Haiyang Zhang [Tue, 15 Jan 2019 00:51:44 +0000 (00:51 +0000)]
hv_netvsc: Fix hash key value reset after other ops

Changing mtu, channels, or buffer sizes ops call to netvsc_attach(),
rndis_set_subchannel(), which always reset the hash key to default
value. That will override hash key changed previously. This patch
fixes the problem by save the hash key, then restore it when we re-
add the netvsc device.

Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
[sl: fix up subject line]
Signed-off-by: Sasha Levin <sashal@kernel.org>
16 months agohv_netvsc: Refactor assignments of struct netvsc_device_info
Haiyang Zhang [Tue, 15 Jan 2019 00:51:43 +0000 (00:51 +0000)]
hv_netvsc: Refactor assignments of struct netvsc_device_info

These assignments occur in multiple places. The patch refactor them
to a function for simplicity. It also puts the struct to heap area
for future expension.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
[sl: fix up subject line]
Signed-off-by: Sasha Levin <sashal@kernel.org>
16 months agohv_netvsc: Fix ethtool change hash key error
Haiyang Zhang [Tue, 15 Jan 2019 00:51:42 +0000 (00:51 +0000)]
hv_netvsc: Fix ethtool change hash key error

Hyper-V hosts require us to disable RSS before changing RSS key,
otherwise the changing request will fail. This patch fixes the
coding error.

Fixes: ff4a44199012 ("netvsc: allow get/set of RSS indirection table")
Reported-by: Wei Hu <weh@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
[sl: fix up subject line]
Signed-off-by: Sasha Levin <sashal@kernel.org>
16 months agoravb: expand rx descriptor data to accommodate hw checksum
Simon Horman [Wed, 23 Jan 2019 11:14:52 +0000 (12:14 +0100)]
ravb: expand rx descriptor data to accommodate hw checksum

EtherAVB may provide a checksum of packet data appended to packet data. In
order to allow this checksum to be received by the host descriptor data
needs to be enlarged by 2 bytes to accommodate the checksum.

In the case of MTU-sized packets without a VLAN tag the
checksum were already accommodated by virtue of the space reserved for the
VLAN tag. However, a packet of MTU-size with a  VLAN tag consumed all
packet data space provided by a descriptor leaving no space for the
trailing checksum.

This was not detected by the driver which incorrectly used the last two
bytes of packet data as the checksum and truncate the packet by two bytes.
This resulted all such packets being dropped.

A work around is to disable RX checksum offload
 # ethtool -K eth0 rx off

This patch resolves this problem by increasing the size available for
packet data in RX descriptors by two bytes.

Tested on R-Car E3 (r8a77990) ES1.0 based Ebisu-4D board

v2
* Use sizeof(__sum16) directly rather than adding a driver-local
  #define for the size of the checksum provided by the hw (2 bytes).

Fixes: 4d86d3818627 ("ravb: RX checksum offload")
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoipmi: Don't initialize anything in the core until something uses it
Corey Minyard [Thu, 20 Dec 2018 22:50:23 +0000 (16:50 -0600)]
ipmi: Don't initialize anything in the core until something uses it

The IPMI driver was recently modified to use SRCU, but it turns out
this uses a chunk of percpu memory, even if IPMI is never used.

So modify thing to on initialize on the first use.  There was already
code to sort of handle this for handling init races, so piggy back
on top of that, and simplify it in the process.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reported-by: Tejun Heo <tj@kernel.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # 4.18
16 months agoipmi: fix use-after-free of user->release_barrier.rda
Yang Yingliang [Wed, 16 Jan 2019 05:33:22 +0000 (13:33 +0800)]
ipmi: fix use-after-free of user->release_barrier.rda

When we do the following test, we got oops in ipmi_msghandler driver
while((1))
do
service ipmievd restart & service ipmievd restart
done

---------------------------------------------------------------
[  294.230186] Unable to handle kernel paging request at virtual address 0000803fea6ea008
[  294.230188] Mem abort info:
[  294.230190]   ESR = 0x96000004
[  294.230191]   Exception class = DABT (current EL), IL = 32 bits
[  294.230193]   SET = 0, FnV = 0
[  294.230194]   EA = 0, S1PTW = 0
[  294.230195] Data abort info:
[  294.230196]   ISV = 0, ISS = 0x00000004
[  294.230197]   CM = 0, WnR = 0
[  294.230199] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000a1c1b75a
[  294.230201] [0000803fea6ea008] pgd=0000000000000000
[  294.230204] Internal error: Oops: 96000004 [#1] SMP
[  294.235211] Modules linked in: nls_utf8 isofs rpcrdma ib_iser ib_srpt target_core_mod ib_srp scsi_transport_srp ib_ipoib rdma_ucm ib_umad rdma_cm ib_cm iw_cm dm_mirror dm_region_hash dm_log dm_mod aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce sha2_ce ses sha256_arm64 sha1_ce hibmc_drm hisi_sas_v2_hw enclosure sg hisi_sas_main sbsa_gwdt ip_tables mlx5_ib ib_uverbs marvell ib_core mlx5_core ixgbe ipmi_si mdio hns_dsaf ipmi_devintf ipmi_msghandler hns_enet_drv hns_mdio
[  294.277745] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.0.0-rc2+ #113
[  294.285511] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.37 11/21/2017
[  294.292835] pstate: 80000005 (Nzcv daif -PAN -UAO)
[  294.297695] pc : __srcu_read_lock+0x38/0x58
[  294.301940] lr : acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler]
[  294.307853] sp : ffff00001001bc80
[  294.311208] x29: ffff00001001bc80 x28: ffff0000117e5000
[  294.316594] x27: 0000000000000000 x26: dead000000000100
[  294.321980] x25: dead000000000200 x24: ffff803f6bd06800
[  294.327366] x23: 0000000000000000 x22: 0000000000000000
[  294.332752] x21: ffff00001001bd04 x20: ffff80df33d19018
[  294.338137] x19: ffff80df33d19018 x18: 0000000000000000
[  294.343523] x17: 0000000000000000 x16: 0000000000000000
[  294.348908] x15: 0000000000000000 x14: 0000000000000002
[  294.354293] x13: 0000000000000000 x12: 0000000000000000
[  294.359679] x11: 0000000000000000 x10: 0000000000100000
[  294.365065] x9 : 0000000000000000 x8 : 0000000000000004
[  294.370451] x7 : 0000000000000000 x6 : ffff80df34558678
[  294.375836] x5 : 000000000000000c x4 : 0000000000000000
[  294.381221] x3 : 0000000000000001 x2 : 0000803fea6ea000
[  294.386607] x1 : 0000803fea6ea008 x0 : 0000000000000001
[  294.391994] Process swapper/3 (pid: 0, stack limit = 0x0000000083087293)
[  294.398791] Call trace:
[  294.401266]  __srcu_read_lock+0x38/0x58
[  294.405154]  acquire_ipmi_user+0x2c/0x70 [ipmi_msghandler]
[  294.410716]  deliver_response+0x80/0xf8 [ipmi_msghandler]
[  294.416189]  deliver_local_response+0x28/0x68 [ipmi_msghandler]
[  294.422193]  handle_one_recv_msg+0x158/0xcf8 [ipmi_msghandler]
[  294.432050]  handle_new_recv_msgs+0xc0/0x210 [ipmi_msghandler]
[  294.441984]  smi_recv_tasklet+0x8c/0x158 [ipmi_msghandler]
[  294.451618]  tasklet_action_common.isra.5+0x88/0x138
[  294.460661]  tasklet_action+0x2c/0x38
[  294.468191]  __do_softirq+0x120/0x2f8
[  294.475561]  irq_exit+0x134/0x140
[  294.482445]  __handle_domain_irq+0x6c/0xc0
[  294.489954]  gic_handle_irq+0xb8/0x178
[  294.497037]  el1_irq+0xb0/0x140
[  294.503381]  arch_cpu_idle+0x34/0x1a8
[  294.510096]  do_idle+0x1d4/0x290
[  294.516322]  cpu_startup_entry+0x28/0x30
[  294.523230]  secondary_start_kernel+0x184/0x1d0
[  294.530657] Code: d538d082 d2800023 8b010c81 8b020021 (c85f7c25)
[  294.539746] ---[ end trace 8a7a880dee570b29 ]---
[  294.547341] Kernel panic - not syncing: Fatal exception in interrupt
[  294.556837] SMP: stopping secondary CPUs
[  294.563996] Kernel Offset: disabled
[  294.570515] CPU features: 0x002,21006008
[  294.577638] Memory Limit: none
[  294.587178] Starting crashdump kernel...
[  294.594314] Bye!

Because the user->release_barrier.rda is freed in ipmi_destroy_user(), but
the refcount is not zero, when acquire_ipmi_user() uses user->release_barrier.rda
in __srcu_read_lock(), it causes oops.
Fix this by calling cleanup_srcu_struct() when the refcount is zero.

Fixes: e86ee2d44b44 ("ipmi: Rework locking and shutdown for hot remove")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
16 months agoipmi: Prevent use-after-free in deliver_response
Fred Klassen [Sat, 19 Jan 2019 22:28:18 +0000 (14:28 -0800)]
ipmi: Prevent use-after-free in deliver_response

Some IPMI modules (e.g. ibmpex_msg_handler()) will have ipmi_usr_hdlr
handlers that call ipmi_free_recv_msg() directly. This will essentially
kfree(msg), leading to use-after-free.

This does not happen in the ipmi_devintf module, which will queue the
message and run ipmi_free_recv_msg() later.

BUG: KASAN: use-after-free in deliver_response+0x12f/0x1b0
Read of size 8 at addr ffff888a7bf20018 by task ksoftirqd/3/27
CPU: 3 PID: 27 Comm: ksoftirqd/3 Tainted: G           O      4.19.11-amd64-ani99-debug #12.0.1.601133+pv
Hardware name: AppNeta r1000/X11SPW-TF, BIOS 2.1a-AP 09/17/2018
Call Trace:
dump_stack+0x92/0xeb
print_address_description+0x73/0x290
kasan_report+0x258/0x380
deliver_response+0x12f/0x1b0
? ipmi_free_recv_msg+0x50/0x50
deliver_local_response+0xe/0x50
handle_one_recv_msg+0x37a/0x21d0
handle_new_recv_msgs+0x1ce/0x440
...

Allocated by task 9885:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0x116/0x290
ipmi_alloc_recv_msg+0x28/0x70
i_ipmi_request+0xb4a/0x1640
ipmi_request_settime+0x1b8/0x1e0
...

Freed by task 27:
__kasan_slab_free+0x12e/0x180
kfree+0xe9/0x280
deliver_response+0x122/0x1b0
deliver_local_response+0xe/0x50
handle_one_recv_msg+0x37a/0x21d0
handle_new_recv_msgs+0x1ce/0x440
tasklet_action_common.isra.19+0xc4/0x250
__do_softirq+0x11f/0x51f

Fixes: e86ee2d44b44 ("ipmi: Rework locking and shutdown for hot remove")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Fred Klassen <fklassen@appneta.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
16 months agoipmi: msghandler: Fix potential Spectre v1 vulnerabilities
Gustavo A. R. Silva [Wed, 9 Jan 2019 23:39:06 +0000 (17:39 -0600)]
ipmi: msghandler: Fix potential Spectre v1 vulnerabilities

channel and addr->channel are indirectly controlled by user-space,
hence leading to a potential exploitation of the Spectre variant 1
vulnerability.

These issues were detected with the help of Smatch:

drivers/char/ipmi/ipmi_msghandler.c:1381 ipmi_set_my_address() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1401 ipmi_get_my_address() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1421 ipmi_set_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [w] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:1441 ipmi_get_my_LUN() warn: potential spectre issue 'user->intf->addrinfo' [r] (local cap)
drivers/char/ipmi/ipmi_msghandler.c:2260 check_addr() warn: potential spectre issue 'intf->addrinfo' [r] (local cap)

Fix this by sanitizing channel and addr->channel before using them to
index user->intf->addrinfo and intf->addrinfo, correspondingly.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
16 months agoipmi:ssif: Fix handling of multi-part return messages
Corey Minyard [Fri, 16 Nov 2018 15:59:21 +0000 (09:59 -0600)]
ipmi:ssif: Fix handling of multi-part return messages

The block number was not being compared right, it was off by one
when checking the response.

Some statistics wouldn't be incremented properly in some cases.

Check to see if that middle-part messages always have 31 bytes of
data.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.4
16 months agovfio-pci/nvlink2: Fix ancient gcc warnings
Alexey Kardashevskiy [Wed, 23 Jan 2019 04:07:11 +0000 (15:07 +1100)]
vfio-pci/nvlink2: Fix ancient gcc warnings

Using the {0} construct as a generic initializer is perfectly fine in C,
however due to a bug in old gcc there is a warning:

  + /kisskb/src/drivers/vfio/pci/vfio_pci_nvlink2.c: warning: (near
initialization for 'cap.header') [-Wmissing-braces]:  => 181:9

Since for whatever reason we still want to compile the modern kernel
with such an old gcc without warnings, this changes the capabilities
initialization.

The gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53119

Fixes: 7f92891778df ("vfio_pci: Add NVIDIA GV100GL [Tesla V100 SXM2] subdriver")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
16 months agodrm/i915/gvt: release shadow batch buffer and wa_ctx before destroy one workload
Weinan Li [Tue, 22 Jan 2019 05:46:27 +0000 (13:46 +0800)]
drm/i915/gvt: release shadow batch buffer and wa_ctx before destroy one workload

GVT-g will shadow the privilege batch buffer and the indirect context
during command scan, move the release process into
intel_vgpu_destroy_workload() to ensure the resources are recycled
properly.

Fixes: 0cce2823ed37 ("drm/i915/gvt/kvmgt:Refine error handling for prepare_execlist_workload")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Weinan Li <weinan.z.li@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
16 months agonet: phy: Fixup GPLv2+ SPDX tags based on license text
Andrew Lunn [Mon, 21 Jan 2019 18:08:49 +0000 (19:08 +0100)]
net: phy: Fixup GPLv2+ SPDX tags based on license text

A few PHY drivers have the GPLv2+ license text. They then either have
a MODULE_LICENSE() of GPLv2 only, or an SPDX tag of GPLv2 only.

Since the license text is much easier to understand than either the
SPDX tag or the MODULE_LICENSE, use it as the definitive source of the
licence, and fixup the others when there are contradictions.

Cc: David Wu <david.wu@rock-chips.com>
Cc: Dongpo Li <lidongpo@hisilicon.com>
Cc: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agonet: fec: get regulator optional
Stefan Agner [Mon, 21 Jan 2019 14:58:47 +0000 (15:58 +0100)]
net: fec: get regulator optional

According to the device tree binding the phy-supply property is
optional. Use the regulator_get_optional API accordingly. The
code already handles NULL just fine.

This gets rid of the following warning:
  fec 2188000.ethernet: 2188000.ethernet supply phy not found, using dummy regulator

Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agonet/ipv6: lower the level of "link is not ready" messages
Lubomir Rintel [Mon, 21 Jan 2019 13:54:20 +0000 (14:54 +0100)]
net/ipv6: lower the level of "link is not ready" messages

This message gets logged far too often for how interesting is it.

Most distributions nowadays configure NetworkManager to use randomly
generated MAC addresses for Wi-Fi network scans. The interfaces end up
being periodically brought down for the address change. When they're
subsequently brought back up, the message is logged, eventually flooding
the log.

Perhaps the message is not all that helpful: it seems to be more
interesting to hear when the addrconf actually start, not when it does
not. Let's lower its level.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-By: Thomas Haller <thaller@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoMerge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Linus Torvalds [Wed, 23 Jan 2019 03:23:41 +0000 (16:23 +1300)]
Merge branch 'for-rc' of git://git./linux/kernel/git/rzhang/linux

Pull thermal management fixes from Zhang Rui:

 - Fix a race condition that sysfs could be accessed before necessary
   initialization in int340x thermal driver. (Aaron Hill)

 - Fix a NULL vs IS_ERR() check in int340x thermal driver. (Dan
   Carpenter)

* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  drivers: thermal: int340x_thermal: Fix sysfs race condition
  thermal: int340x_thermal: Fix a NULL vs IS_ERR() check

16 months agoscsi: ufs: Use explicit access size in ufshcd_dump_regs
Marc Gonzalez [Tue, 22 Jan 2019 17:29:22 +0000 (18:29 +0100)]
scsi: ufs: Use explicit access size in ufshcd_dump_regs

memcpy_fromio() doesn't provide any control over access size.  For example,
on arm64, it is implemented using readb and readq.  This may trigger a
synchronous external abort:

[    3.729943] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
[    3.737000] Modules linked in:
[    3.744371] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G S                4.20.0-rc4 #16
[    3.747413] Hardware name: Qualcomm Technologies, Inc. MSM8998 v1 MTP (DT)
[    3.755295] pstate: 00000005 (nzcv daif -PAN -UAO)
[    3.761978] pc : __memcpy_fromio+0x68/0x80
[    3.766718] lr : ufshcd_dump_regs+0x50/0xb0
[    3.770767] sp : ffff00000807ba00
[    3.774830] x29: ffff00000807ba00 x28: 00000000fffffffb
[    3.778344] x27: ffff0000089db068 x26: ffff8000f6e58000
[    3.783728] x25: 000000000000000e x24: 0000000000000800
[    3.789023] x23: ffff8000f6e587c8 x22: 0000000000000800
[    3.794319] x21: ffff000008908368 x20: ffff8000f6e1ab80
[    3.799615] x19: 000000000000006c x18: ffffffffffffffff
[    3.804910] x17: 0000000000000000 x16: 0000000000000000
[    3.810206] x15: ffff000009199648 x14: ffff000089244187
[    3.815502] x13: ffff000009244195 x12: ffff0000091ab000
[    3.820797] x11: 0000000005f5e0ff x10: ffff0000091998a0
[    3.826093] x9 : 0000000000000000 x8 : ffff8000f6e1ac00
[    3.831389] x7 : 0000000000000000 x6 : 0000000000000068
[    3.836676] x5 : ffff8000f6e1abe8 x4 : 0000000000000000
[    3.841971] x3 : ffff00000928c868 x2 : ffff8000f6e1abec
[    3.847267] x1 : ffff00000928c868 x0 : ffff8000f6e1abe8
[    3.852567] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____))
[    3.857900] Call trace:
[    3.864473]  __memcpy_fromio+0x68/0x80
[    3.866683]  ufs_qcom_dump_dbg_regs+0x1c0/0x370
[    3.870522]  ufshcd_print_host_regs+0x168/0x190
[    3.874946]  ufshcd_init+0xd4c/0xde0
[    3.879459]  ufshcd_pltfrm_init+0x3c8/0x550
[    3.883264]  ufs_qcom_probe+0x24/0x60
[    3.887188]  platform_drv_probe+0x50/0xa0

Assuming aligned 32-bit registers, let's use readl, after making sure
that 'offset' and 'len' are indeed multiples of 4.

Fixes: ba80917d9932d ("scsi: ufs: ufshcd_dump_regs to use memcpy_fromio")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Tested-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
16 months agoscsi: tcmu: fix use after free
Xiubo Li [Tue, 22 Jan 2019 10:10:51 +0000 (18:10 +0800)]
scsi: tcmu: fix use after free

Fixes: a94a2572b977 ("scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Mike Christie <mchristi@redhat.com>
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
16 months agonet: altera_tse: fix connect_local_phy error path
Atsushi Nemoto [Mon, 21 Jan 2019 08:26:41 +0000 (17:26 +0900)]
net: altera_tse: fix connect_local_phy error path

The connect_local_phy should return NULL (not negative errno) on
error, since its caller expects it.

Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoscsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
Varun Prakash [Sat, 12 Jan 2019 16:44:30 +0000 (22:14 +0530)]
scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()

Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to
avoid a NULL pointer dereference in csio_vport_set_state().

ln->fc_vport is dereferenced in csio_vport_set_state().

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
16 months agoscsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
Ewan D. Milne [Thu, 17 Jan 2019 16:14:45 +0000 (11:14 -0500)]
scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport

We cannot wait on a completion object in the lpfc_nvme_targetport structure
in the _destroy_targetport() code path because the NVMe/fc transport will
free that structure immediately after the .targetport_delete() callback.
This results in a use-after-free, and a hang if slub_debug=FZPU is enabled.

Fix this by putting the completion on the stack.

Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
16 months agoscsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
Ewan D. Milne [Thu, 17 Jan 2019 16:14:44 +0000 (11:14 -0500)]
scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport

We cannot wait on a completion object in the lpfc_nvme_lport structure in
the _destroy_localport() code path because the NVMe/fc transport will free
that structure immediately after the .localport_delete() callback.  This
results in a use-after-free, and a hang if slub_debug=FZPU is enabled.

Fix this by putting the completion on the stack.

Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Acked-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
16 months agoscsi: communicate max segment size to the DMA mapping code
Christoph Hellwig [Wed, 16 Jan 2019 16:12:15 +0000 (17:12 +0100)]
scsi: communicate max segment size to the DMA mapping code

When a host driver sets a maximum segment size we should not only propagate
that setting to the block layer, which can merge segments, but also to the
DMA mapping layer which can merge segments as well.

Fixes: 50c2e9107f ("scsi: introduce a max_segment_size host_template parameters")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
16 months agonet: dpaa2: improve PTP Kconfig option
Yangbo Lu [Mon, 21 Jan 2019 06:26:37 +0000 (14:26 +0800)]
net: dpaa2: improve PTP Kconfig option

Converted to use "imply" instead of "select" for PTP_1588_CLOCK
driver selecting. This could break the hard dependency between
the PTP clock subsystem and ethernet drivers.
This patch also set "default y" for dpaa2 ptp driver building to
provide user an available ptp clock in default.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoMerge branch 'qed-Error-recovery-process'
David S. Miller [Wed, 23 Jan 2019 01:30:39 +0000 (17:30 -0800)]
Merge branch 'qed-Error-recovery-process'

Michal Kalderon says:

====================
qed*: Error recovery process

Parity errors might happen in the device's memories due to momentary bit
flips which are caused by radiation.
Errors that are not correctable initiate a process kill event, which blocks
the device access towards the host and the network, and a recovery process
is started in the management FW and in the driver.

This series adds the support of this process in the qed core module and in
the qede driver (patches 2 & 3).
Patch 1 in the series revises the load sequence, to avoid PCI errors that
might be observed during a recovery process.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
16 months agoqede: Error recovery process
Tomer Tayar [Sun, 20 Jan 2019 09:36:39 +0000 (11:36 +0200)]
qede: Error recovery process

This patch adds the error recovery process in the qede driver.
The process includes a partial/customized driver unload and load, which
allows it to look like a short suspend period to the kernel while
preserving the net devices' state.

Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>