From: Janusz Krzysztofik Date: Tue, 2 Oct 2018 09:45:29 +0000 (+0200) Subject: ARM: OMAP1: ams-delta: Fix impossible .irq < 0 X-Git-Tag: v4.20-rc1~9^2^2 X-Git-Url: http://git.samba.org/samba.git/?p=sfrench%2Fcifs-2.6.git;a=commitdiff_plain;h=ab6ead7d07ca87e3e66e6d524c8aa311732878de ARM: OMAP1: ams-delta: Fix impossible .irq < 0 Since the very beginning, unsigned int .irq member of struct plat_serial8250_port introduced by commit eff443df679e ("OMAP1: AMS_DELTA: add modem support") was statically initialized to a negative value -EINVAL. Moreover, commit 0812db943748 ("ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor") has introduced some new code which checks for that member carrying a negative value which is impossible. Use IRQ_NOTCONNECTED instead of -EINVAL. Also, drop the valueless check and let the modem device be registered regardless of .irq value, and the value handled by "serial8250" driver. Fixes: 0812db943748 ("ARM: OMAP1: ams-delta: assign MODEM IRQ from GPIO descriptor") Reported-by: Dan Carpenter Signed-off-by: Janusz Krzysztofik Acked-by: Aaro Koskinen Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index 318925ae3ebe..b01b68494cac 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -765,7 +765,7 @@ static struct plat_serial8250_port ams_delta_modem_ports[] = { { .membase = IOMEM(MODEM_VIRT), .mapbase = MODEM_PHYS, - .irq = -EINVAL, /* changed later */ + .irq = IRQ_NOTCONNECTED, /* changed later */ .flags = UPF_BOOT_AUTOCONF, .irqflags = IRQF_TRIGGER_RISING, .iotype = UPIO_MEM, @@ -856,8 +856,7 @@ static int __init modem_nreset_init(void) /* - * This function expects MODEM IRQ number already assigned to the port - * and fails if it's not. + * This function expects MODEM IRQ number already assigned to the port. * The MODEM device requires its RESET# pin kept high during probe. * That requirement can be fulfilled in several ways: * - with a descriptor of already functional modem_nreset regulator @@ -880,9 +879,6 @@ static int __init ams_delta_modem_init(void) if (!machine_is_ams_delta()) return -ENODEV; - if (ams_delta_modem_ports[0].irq < 0) - return ams_delta_modem_ports[0].irq; - omap_cfg_reg(M14_1510_GPIO2); /* Initialize the modem_nreset regulator consumer before use */