sata_nv: don't rely on NV_INT_DEV indication with ADMA
authorRobert Hancock <hancockr@shaw.ca>
Wed, 24 Jan 2007 02:09:02 +0000 (20:09 -0600)
committerJeff Garzik <jeff@garzik.org>
Wed, 24 Jan 2007 07:01:49 +0000 (02:01 -0500)
Several people reported issues with certain drive commands timing out on
sata_nv controllers running in ADMA mode. The commands in question were
non-DMA-mapped commands, usually FLUSH CACHE or FLUSH CACHE EXT.

 From experimentation it appears that the NV_INT_DEV indication isn't
always set when a legitimate command completion interrupt is received on
a legacy-mode command, at least not on these controllers in ADMA mode.
When a command is pending on the port, force the flag on always in the
irq_stat value before calling nv_host_intr so that the drive busy state
is always checked by ata_host_intr.

This also fixes some questionable code in nv_host_intr which called
ata_check_status when a command was pending and ata_host_intr returned
"unhandled". If the device interrupted at just the wrong time this could
cause interrupts to be lost.

Signed-off-by: Robert Hancock <hancockr@shaw.ca>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
drivers/ata/sata_nv.c

index f6d498e1cf80b11f0dd23299415633d5d00e86f1..f7a963eb1f028ea77a7ce4576d64c3c595faa574 100644 (file)
@@ -700,7 +700,6 @@ static void nv_adma_check_cpb(struct ata_port *ap, int cpb_num, int force_err)
 static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
 {
        struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
-       int handled;
 
        /* freeze if hotplugged */
        if (unlikely(irq_stat & (NV_INT_ADDED | NV_INT_REMOVED))) {
@@ -719,13 +718,7 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
        }
 
        /* handle interrupt */
-       handled = ata_host_intr(ap, qc);
-       if (unlikely(!handled)) {
-               /* spurious, clear it */
-               ata_check_status(ap);
-       }
-
-       return 1;
+       return ata_host_intr(ap, qc);
 }
 
 static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
@@ -752,6 +745,11 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
                        if (pp->flags & NV_ADMA_PORT_REGISTER_MODE) {
                                u8 irq_stat = readb(host->mmio_base + NV_INT_STATUS_CK804)
                                        >> (NV_INT_PORT_SHIFT * i);
+                               if(ata_tag_valid(ap->active_tag))
+                                       /** NV_INT_DEV indication seems unreliable at times
+                                           at least in ADMA mode. Force it on always when a
+                                           command is active, to prevent losing interrupts. */
+                                       irq_stat |= NV_INT_DEV;
                                handled += nv_host_intr(ap, irq_stat);
                                continue;
                        }