Control touchpad mode.
* 1 -> Switched On
* 0 -> Switched Off
+
+What: /sys/bus/pci/devices/<bdf>/<device>/VPC2004:00/fn_lock
+Date: May 2018
+KernelVersion: 4.18
+Contact: "Oleg Keri <ezhi99@gmail.com>"
+Description:
+ Control fn-lock mode.
+ * 1 -> Switched On
+ * 0 -> Switched Off
+
+ For example:
+ # echo "0" > \
+ /sys/bus/pci/devices/0000:00:1f.0/PNP0C09:00/VPC2004:00/fn_lock
0x6021 ALARM: a sensor is too hot
0x6022 ALARM: a sensor is extremely hot
0x6030 System thermal table changed
+0x6032 Thermal Control command set completion (DYTC, Windows)
0x6040 Nvidia Optimus/AC adapter related (TO BE VERIFIED)
0x60C0 X1 Yoga 2016, Tablet mode status changed
+0x60F0 Thermal Transformation changed (GMTS, Windows)
Battery nearly empty alarms are a last resort attempt to get the
operating system to hibernate or shutdown cleanly (0x2313), or shutdown
#define MLXREG_HOTPLUG_RST_CNTR 3
#define MLXREG_HOTPLUG_ATTRS_MAX 24
+#define MLXREG_HOTPLUG_NOT_ASSERT 3
/**
* struct mlxreg_hotplug_priv_data - platform private data:
* @irq: platform device interrupt number;
+ * @dev: basic device;
* @pdev: platform device;
* @plat: platform data;
- * @dwork: delayed work template;
+ * @regmap: register map handle;
+ * @dwork_irq: delayed work template;
* @lock: spin lock;
* @hwmon: hwmon device;
* @mlxreg_hotplug_attr: sysfs attributes array;
* @cell: location of top aggregation interrupt register;
* @mask: top aggregation interrupt common mask;
* @aggr_cache: last value of aggregation register status;
+ * @after_probe: flag indication probing completion;
+ * @not_asserted: number of entries in workqueue with no signal assertion;
*/
struct mlxreg_hotplug_priv_data {
int irq;
struct mlxreg_hotplug_platform_data *plat;
struct regmap *regmap;
struct delayed_work dwork_irq;
- struct delayed_work dwork;
spinlock_t lock; /* sync with interrupt */
struct device *hwmon;
struct attribute *mlxreg_hotplug_attr[MLXREG_HOTPLUG_ATTRS_MAX + 1];
u32 mask;
u32 aggr_cache;
bool after_probe;
+ u8 not_asserted;
};
static int mlxreg_hotplug_device_create(struct mlxreg_hotplug_priv_data *priv,
aggr_asserted = priv->aggr_cache ^ regval;
priv->aggr_cache = regval;
+ /*
+ * Handler is invoked, but no assertion is detected at top aggregation
+ * status level. Set aggr_asserted to mask value to allow handler extra
+ * run over all relevant signals to recover any missed signal.
+ */
+ if (priv->not_asserted == MLXREG_HOTPLUG_NOT_ASSERT) {
+ priv->not_asserted = 0;
+ aggr_asserted = pdata->mask;
+ }
+ if (!aggr_asserted)
+ goto unmask_event;
+
/* Handle topology and health configuration changes. */
for (i = 0; i < pdata->counter; i++, item++) {
if (aggr_asserted & item->aggr_mask) {
}
}
- if (aggr_asserted) {
- spin_lock_irqsave(&priv->lock, flags);
+ spin_lock_irqsave(&priv->lock, flags);
- /*
- * It is possible, that some signals have been inserted, while
- * interrupt has been masked by mlxreg_hotplug_work_handler.
- * In this case such signals will be missed. In order to handle
- * these signals delayed work is canceled and work task
- * re-scheduled for immediate execution. It allows to handle
- * missed signals, if any. In other case work handler just
- * validates that no new signals have been received during
- * masking.
- */
- cancel_delayed_work(&priv->dwork_irq);
- schedule_delayed_work(&priv->dwork_irq, 0);
+ /*
+ * It is possible, that some signals have been inserted, while
+ * interrupt has been masked by mlxreg_hotplug_work_handler. In this
+ * case such signals will be missed. In order to handle these signals
+ * delayed work is canceled and work task re-scheduled for immediate
+ * execution. It allows to handle missed signals, if any. In other case
+ * work handler just validates that no new signals have been received
+ * during masking.
+ */
+ cancel_delayed_work(&priv->dwork_irq);
+ schedule_delayed_work(&priv->dwork_irq, 0);
- spin_unlock_irqrestore(&priv->lock, flags);
+ spin_unlock_irqrestore(&priv->lock, flags);
- return;
- }
+ return;
+unmask_event:
+ priv->not_asserted++;
/* Unmask aggregation event (no need acknowledge). */
ret = regmap_write(priv->regmap, pdata->cell +
MLXREG_HOTPLUG_AGGR_MASK_OFF, pdata->mask);
{KE_IGNORE, 0x83, {KEY_TOUCHPAD_TOGGLE} },
{KE_KEY, 0x85, {KEY_TOUCHPAD_TOGGLE} },
{KE_KEY, 0x86, {KEY_WLAN} },
+ {KE_KEY, 0x87, {KEY_POWER} },
{KE_END, 0}
};
return gmux_set_discrete_state(apple_gmux_data, state);
}
-static int gmux_get_client_id(struct pci_dev *pdev)
+static enum vga_switcheroo_client_id gmux_get_client_id(struct pci_dev *pdev)
{
/*
* Early Macbook Pros with switchable graphics use nvidia
int idx)
{
struct device *dev = container_of(kobj, struct device, kobj);
- struct platform_device *pdev = to_platform_device(dev);
- struct asus_laptop *asus = platform_get_drvdata(pdev);
+ struct asus_laptop *asus = dev_get_drvdata(dev);
acpi_handle handle = asus->handle;
bool supported;
acpi_handle_err(handle,
"Failed to eval method %s, param %#x (%d)\n",
method, param, s);
- acpi_handle_debug(handle, "%s returned %#x\n", method, (uint) ret);
+ acpi_handle_debug(handle, "%s returned %#llx\n", method, ret);
return ret;
}
struct attribute *attr, int idx)
{
struct device *dev = container_of(kobj, struct device, kobj);
- struct platform_device *pdev = to_platform_device(dev);
- struct asus_wmi *asus = platform_get_drvdata(pdev);
+ struct asus_wmi *asus = dev_get_drvdata(dev);
bool ok = true;
int devid = -1;
struct quirk_entry {
bool touchpad_led;
bool kbd_led_levels_off_1;
+ bool kbd_missing_ac_tag;
bool needs_kbd_timeouts;
/*
.kbd_timeouts = { 0, 5, 15, 60, 5 * 60, 15 * 60, -1 },
};
+static struct quirk_entry quirk_dell_xps13_9370 = {
+ .kbd_missing_ac_tag = true,
+};
+
static struct quirk_entry quirk_dell_latitude_e6410 = {
.kbd_led_levels_off_1 = true,
};
},
.driver_data = &quirk_dell_xps13_9333,
},
+ {
+ .callback = dmi_matched,
+ .ident = "Dell XPS 13 9370",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9370"),
+ },
+ .driver_data = &quirk_dell_xps13_9370,
+ },
{
.callback = dmi_matched,
.ident = "Dell Latitude E6410",
* timeout value which is shared for both battery and AC power
* settings. So do not try to set AC values on old models.
*/
- if (dell_smbios_find_token(KBD_LED_AC_TOKEN))
+ if ((quirks && quirks->kbd_missing_ac_tag) ||
+ dell_smbios_find_token(KBD_LED_AC_TOKEN))
kbd_timeout_ac_supported = true;
kbd_get_state(&state);
static int __init dell_smbios_init(void)
{
- const struct dmi_device *valid;
int ret, wmi, smm;
- valid = dmi_find_device(DMI_DEV_TYPE_OEM_STRING, "Dell System", NULL);
- if (!valid) {
+ if (!dmi_find_device(DMI_DEV_TYPE_OEM_STRING, "Dell System", NULL) &&
+ !dmi_find_device(DMI_DEV_TYPE_OEM_STRING, "www.dell.com", NULL)) {
pr_err("Unable to run on non-Dell system\n");
return -ENODEV;
}
[18] = KEY_PROG1,
[19] = KEY_BRIGHTNESSDOWN,
[20] = KEY_BRIGHTNESSUP,
- [21] = KEY_UNKNOWN,
+ [21] = KEY_BRIGHTNESS_AUTO,
[22] = KEY_KBDILLUMTOGGLE,
[23] = KEY_UNKNOWN,
[24] = KEY_SWITCHVIDEOMODE,
* override them.
*/
static const struct key_entry dell_wmi_keymap_type_0010[] = {
+ /* Fn-lock switched to function keys */
+ { KE_IGNORE, 0x0, { KEY_RESERVED } },
+
+ /* Fn-lock switched to multimedia keys */
+ { KE_IGNORE, 0x1, { KEY_RESERVED } },
+
/* Mic mute */
{ KE_KEY, 0x150, { KEY_MICMUTE } },
{ KE_KEY, 0x851, { KEY_PROG2 } },
{ KE_KEY, 0x852, { KEY_PROG3 } },
+ /*
+ * Radio disable (notify only -- there is no model for which the
+ * WMI event is supposed to trigger an action).
+ */
+ { KE_IGNORE, 0xe008, { KEY_RFKILL } },
+
+ /* Fn-lock */
+ { KE_IGNORE, 0xe035, { KEY_RESERVED } },
};
/*
#define FLAG_RFKILL BIT(5)
#define FLAG_LID BIT(8)
#define FLAG_DOCK BIT(9)
+#define FLAG_TOUCHPAD_TOGGLE BIT(26)
+#define FLAG_MICMUTE BIT(29)
+#define FLAG_SOFTKEYS (FLAG_RFKILL | FLAG_TOUCHPAD_TOGGLE | FLAG_MICMUTE)
/* FUNC interface - LED control */
#define FUNC_LED_OFF BIT(0)
/* ACPI device for hotkey handling */
static const struct key_entry keymap_default[] = {
- { KE_KEY, KEY1_CODE, { KEY_PROG1 } },
- { KE_KEY, KEY2_CODE, { KEY_PROG2 } },
- { KE_KEY, KEY3_CODE, { KEY_PROG3 } },
- { KE_KEY, KEY4_CODE, { KEY_PROG4 } },
- { KE_KEY, KEY5_CODE, { KEY_RFKILL } },
- { KE_KEY, BIT(5), { KEY_RFKILL } },
- { KE_KEY, BIT(26), { KEY_TOUCHPAD_TOGGLE } },
- { KE_KEY, BIT(29), { KEY_MICMUTE } },
+ { KE_KEY, KEY1_CODE, { KEY_PROG1 } },
+ { KE_KEY, KEY2_CODE, { KEY_PROG2 } },
+ { KE_KEY, KEY3_CODE, { KEY_PROG3 } },
+ { KE_KEY, KEY4_CODE, { KEY_PROG4 } },
+ { KE_KEY, KEY5_CODE, { KEY_RFKILL } },
+ /* Soft keys read from status flags */
+ { KE_KEY, FLAG_RFKILL, { KEY_RFKILL } },
+ { KE_KEY, FLAG_TOUCHPAD_TOGGLE, { KEY_TOUCHPAD_TOGGLE } },
+ { KE_KEY, FLAG_MICMUTE, { KEY_MICMUTE } },
{ KE_END, 0 }
};
static void acpi_fujitsu_laptop_notify(struct acpi_device *device, u32 event)
{
struct fujitsu_laptop *priv = acpi_driver_data(device);
- int scancode, i = 0, ret;
+ unsigned long flags;
+ int scancode, i = 0;
unsigned int irb;
if (event != ACPI_FUJITSU_NOTIFY_CODE) {
"Unknown GIRB result [%x]\n", irb);
}
- /* On some models (first seen on the Skylake-based Lifebook
- * E736/E746/E756), the touchpad toggle hotkey (Fn+F4) is
- * handled in software; its state is queried using FUNC_FLAGS
+ /*
+ * First seen on the Skylake-based Lifebook E736/E746/E756), the
+ * touchpad toggle hotkey (Fn+F4) is handled in software. Other models
+ * have since added additional "soft keys". These are reported in the
+ * status flags queried using FUNC_FLAGS.
*/
- if (priv->flags_supported & (BIT(5) | BIT(26) | BIT(29))) {
- ret = call_fext_func(device, FUNC_FLAGS, 0x1, 0x0, 0x0);
- if (ret & BIT(5))
- sparse_keymap_report_event(priv->input,
- BIT(5), 1, true);
- if (ret & BIT(26))
- sparse_keymap_report_event(priv->input,
- BIT(26), 1, true);
- if (ret & BIT(29))
- sparse_keymap_report_event(priv->input,
- BIT(29), 1, true);
+ if (priv->flags_supported & (FLAG_SOFTKEYS)) {
+ flags = call_fext_func(device, FUNC_FLAGS, 0x1, 0x0, 0x0);
+ flags &= (FLAG_SOFTKEYS);
+ for_each_set_bit(i, &flags, BITS_PER_LONG)
+ sparse_keymap_report_event(priv->input, BIT(i), 1, true);
}
}
#define IDEAPAD_RFKILL_DEV_NUM (3)
#define BM_CONSERVATION_BIT (5)
+#define HA_FNLOCK_BIT (10)
#define CFG_BT_BIT (16)
#define CFG_3G_BIT (17)
enum {
BMCMD_CONSERVATION_ON = 3,
BMCMD_CONSERVATION_OFF = 5,
+ HACMD_FNLOCK_ON = 0xe,
+ HACMD_FNLOCK_OFF = 0xf,
};
enum {
return result;
}
-static int method_sbmc(acpi_handle handle, int cmd)
+static int method_int1(acpi_handle handle, char *method, int cmd)
{
acpi_status status;
- status = acpi_execute_simple_method(handle, "SBMC", cmd);
+ status = acpi_execute_simple_method(handle, method, cmd);
return ACPI_FAILURE(status) ? -1 : 0;
}
if (ret)
return ret;
- ret = method_sbmc(priv->adev->handle, state ?
+ ret = method_int1(priv->adev->handle, "SBMC", state ?
BMCMD_CONSERVATION_ON :
BMCMD_CONSERVATION_OFF);
if (ret < 0)
static DEVICE_ATTR_RW(conservation_mode);
+static ssize_t fn_lock_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ideapad_private *priv = dev_get_drvdata(dev);
+ unsigned long result;
+ int hals;
+ int fail = read_method_int(priv->adev->handle, "HALS", &hals);
+
+ if (fail)
+ return sprintf(buf, "-1\n");
+
+ result = hals;
+ return sprintf(buf, "%u\n", test_bit(HA_FNLOCK_BIT, &result));
+}
+
+static ssize_t fn_lock_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct ideapad_private *priv = dev_get_drvdata(dev);
+ bool state;
+ int ret;
+
+ ret = kstrtobool(buf, &state);
+ if (ret)
+ return ret;
+
+ ret = method_int1(priv->adev->handle, "SALS", state ?
+ HACMD_FNLOCK_ON :
+ HACMD_FNLOCK_OFF);
+ if (ret < 0)
+ return -EIO;
+ return count;
+}
+
+static DEVICE_ATTR_RW(fn_lock);
+
+
static struct attribute *ideapad_attributes[] = {
&dev_attr_camera_power.attr,
&dev_attr_fan_mode.attr,
&dev_attr_touchpad.attr,
&dev_attr_conservation_mode.attr,
+ &dev_attr_fn_lock.attr,
NULL
};
} else if (attr == &dev_attr_conservation_mode.attr) {
supported = acpi_has_method(priv->adev->handle, "GBMD") &&
acpi_has_method(priv->adev->handle, "SBMC");
+ } else if (attr == &dev_attr_fn_lock.attr) {
+ supported = acpi_has_method(priv->adev->handle, "HALS") &&
+ acpi_has_method(priv->adev->handle, "SALS");
} else
supported = true;
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo ideapad Y700-17ISK"),
},
},
+ {
+ .ident = "Lenovo ideapad MIIX 720-12IKB",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "MIIX 720-12IKB"),
+ },
+ },
{
.ident = "Lenovo Legion Y520-15IKBN",
.matches = {
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 920-13IKB"),
},
},
+ {
+ .ident = "Lenovo Zhaoyang E42-80",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "ZHAOYANG E42-80"),
+ },
+ },
{}
};
if (cmd == IPC_I2C_READ) {
writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR);
/* Write not getting updated without delay */
- mdelay(1);
+ usleep_range(1000, 2000);
*data = readl(scu->i2c_base + I2C_DATA_ADDR);
} else if (cmd == IPC_I2C_WRITE) {
writel(*data, scu->i2c_base + I2C_DATA_ADDR);
- mdelay(1);
+ usleep_range(1000, 2000);
writel(addr, scu->i2c_base + IPC_I2C_CNTRL_ADDR);
} else {
dev_err(scu->dev,
/* LPC bus IO offsets */
#define MLXPLAT_CPLD_LPC_I2C_BASE_ADRR 0x2000
#define MLXPLAT_CPLD_LPC_REG_BASE_ADRR 0x2500
+#define MLXPLAT_CPLD_LPC_REG_LED1_OFFSET 0x20
+#define MLXPLAT_CPLD_LPC_REG_LED2_OFFSET 0x21
+#define MLXPLAT_CPLD_LPC_REG_LED3_OFFSET 0x22
+#define MLXPLAT_CPLD_LPC_REG_LED4_OFFSET 0x23
+#define MLXPLAT_CPLD_LPC_REG_LED5_OFFSET 0x24
#define MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET 0x3a
#define MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET 0x3b
#define MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET 0x40
#define MLXPLAT_CPLD_PWR_MASK GENMASK(1, 0)
#define MLXPLAT_CPLD_FAN_MASK GENMASK(3, 0)
#define MLXPLAT_CPLD_FAN_NG_MASK GENMASK(5, 0)
+#define MLXPLAT_CPLD_LED_LO_NIBBLE_MASK GENMASK(7, 4)
+#define MLXPLAT_CPLD_LED_HI_NIBBLE_MASK GENMASK(3, 0)
/* Default I2C parent bus number */
#define MLXPLAT_CPLD_PHYS_ADAPTER_DEF_NR 1
* @pdev_i2c - i2c controller platform device
* @pdev_mux - array of mux platform devices
* @pdev_hotplug - hotplug platform devices
+ * @pdev_led - led platform devices
*/
struct mlxplat_priv {
struct platform_device *pdev_i2c;
struct platform_device *pdev_mux[MLXPLAT_CPLD_LPC_MUX_DEVS];
struct platform_device *pdev_hotplug;
+ struct platform_device *pdev_led;
};
/* Regions for LPC I2C controller and LPC base register space */
.mask_low = MLXPLAT_CPLD_LOW_AGGR_MASK_LOW,
};
+/* Platform led default data */
+static struct mlxreg_core_data mlxplat_mlxcpld_default_led_data[] = {
+ {
+ .label = "status:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "status:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK
+ },
+ {
+ .label = "psu:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "psu:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan1:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan1:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan2:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan2:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan3:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan3:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan4:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan4:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+};
+
+static struct mlxreg_core_platform_data mlxplat_default_led_data = {
+ .data = mlxplat_mlxcpld_default_led_data,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_led_data),
+};
+
+/* Platform led MSN21xx system family data */
+static struct mlxreg_core_data mlxplat_mlxcpld_msn21xx_led_data[] = {
+ {
+ .label = "status:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "status:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK
+ },
+ {
+ .label = "fan:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "psu1:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "psu1:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "psu2:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "psu2:red",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "uid:blue",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED5_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+};
+
+static struct mlxreg_core_platform_data mlxplat_msn21xx_led_data = {
+ .data = mlxplat_mlxcpld_msn21xx_led_data,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_msn21xx_led_data),
+};
+
+/* Platform led for default data for 200GbE systems */
+static struct mlxreg_core_data mlxplat_mlxcpld_default_ng_led_data[] = {
+ {
+ .label = "status:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "status:orange",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK
+ },
+ {
+ .label = "psu:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "psu:orange",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED1_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan1:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan1:orange",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan2:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan2:orange",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED2_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan3:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan3:orange",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan4:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan4:orange",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED3_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan5:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan5:orange",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_LO_NIBBLE_MASK,
+ },
+ {
+ .label = "fan6:green",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+ {
+ .label = "fan6:orange",
+ .reg = MLXPLAT_CPLD_LPC_REG_LED4_OFFSET,
+ .mask = MLXPLAT_CPLD_LED_HI_NIBBLE_MASK,
+ },
+};
+
+static struct mlxreg_core_platform_data mlxplat_default_ng_led_data = {
+ .data = mlxplat_mlxcpld_default_ng_led_data,
+ .counter = ARRAY_SIZE(mlxplat_mlxcpld_default_ng_led_data),
+};
+
+
static bool mlxplat_mlxcpld_writeable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
+ case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRLO_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_PSU_EVENT_OFFSET:
static bool mlxplat_mlxcpld_readable_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
+ case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET:
static bool mlxplat_mlxcpld_volatile_reg(struct device *dev, unsigned int reg)
{
switch (reg) {
+ case MLXPLAT_CPLD_LPC_REG_LED1_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED2_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED3_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED4_OFFSET:
+ case MLXPLAT_CPLD_LPC_REG_LED5_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGR_MASK_OFFSET:
case MLXPLAT_CPLD_LPC_REG_AGGRLO_OFFSET:
static struct platform_device *mlxplat_dev;
static struct mlxreg_core_hotplug_platform_data *mlxplat_hotplug;
+static struct mlxreg_core_platform_data *mlxplat_led;
static int __init mlxplat_dmi_default_matched(const struct dmi_system_id *dmi)
{
mlxplat_hotplug = &mlxplat_mlxcpld_default_data;
mlxplat_hotplug->deferred_nr =
mlxplat_default_channels[i - 1][MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
+ mlxplat_led = &mlxplat_default_led_data;
return 1;
};
mlxplat_hotplug = &mlxplat_mlxcpld_msn21xx_data;
mlxplat_hotplug->deferred_nr =
mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
+ mlxplat_led = &mlxplat_msn21xx_led_data;
return 1;
};
mlxplat_hotplug = &mlxplat_mlxcpld_msn274x_data;
mlxplat_hotplug->deferred_nr =
mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
+ mlxplat_led = &mlxplat_default_led_data;
return 1;
};
mlxplat_hotplug = &mlxplat_mlxcpld_msn201x_data;
mlxplat_hotplug->deferred_nr =
mlxplat_default_channels[i - 1][MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
+ mlxplat_led = &mlxplat_default_ng_led_data;
return 1;
};
mlxplat_hotplug = &mlxplat_mlxcpld_default_ng_data;
mlxplat_hotplug->deferred_nr =
mlxplat_msn21xx_channels[MLXPLAT_CPLD_GRP_CHNL_NUM - 1];
+ mlxplat_led = &mlxplat_msn21xx_led_data;
return 1;
};
DMI_MATCH(DMI_PRODUCT_NAME, "SN34"),
},
},
+ {
+ .callback = mlxplat_dmi_default_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0001"),
+ },
+ },
+ {
+ .callback = mlxplat_dmi_msn21xx_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0002"),
+ },
+ },
+ {
+ .callback = mlxplat_dmi_msn274x_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0003"),
+ },
+ },
+ {
+ .callback = mlxplat_dmi_msn201x_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0004"),
+ },
+ },
+ {
+ .callback = mlxplat_dmi_qmb7xx_matched,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "VMOD0005"),
+ },
+ },
{ }
};
goto fail_platform_mux_register;
}
+ /* Add LED driver. */
+ mlxplat_led->regmap = mlxplat_hotplug->regmap;
+ priv->pdev_led = platform_device_register_resndata(
+ &mlxplat_dev->dev, "leds-mlxreg",
+ PLATFORM_DEVID_NONE, NULL, 0,
+ mlxplat_led, sizeof(*mlxplat_led));
+ if (IS_ERR(priv->pdev_led)) {
+ err = PTR_ERR(priv->pdev_led);
+ goto fail_platform_hotplug_register;
+ }
+
/* Sync registers with hardware. */
regcache_mark_dirty(mlxplat_hotplug->regmap);
err = regcache_sync(mlxplat_hotplug->regmap);
if (err)
- goto fail_platform_hotplug_register;
+ goto fail_platform_led_register;
return 0;
+fail_platform_led_register:
+ platform_device_unregister(priv->pdev_led);
fail_platform_hotplug_register:
platform_device_unregister(priv->pdev_hotplug);
fail_platform_mux_register:
struct mlxplat_priv *priv = platform_get_drvdata(mlxplat_dev);
int i;
+ platform_device_unregister(priv->pdev_led);
platform_device_unregister(priv->pdev_hotplug);
for (i = ARRAY_SIZE(mlxplat_mux_data) - 1; i >= 0 ; i--)
struct attribute *attr, int idx)
{
struct device *dev = container_of(kobj, struct device, kobj);
- struct platform_device *pdev = to_platform_device(dev);
- struct samsung_laptop *samsung = platform_get_drvdata(pdev);
+ struct samsung_laptop *samsung = dev_get_drvdata(dev);
bool ok = true;
if (attr == &dev_attr_performance_level.attr)
.properties = jumper_ezpad_mini3_props,
};
+static const struct property_entry jumper_ezpad_6_pro_props[] = {
+ PROPERTY_ENTRY_U32("touchscreen-size-x", 1980),
+ PROPERTY_ENTRY_U32("touchscreen-size-y", 1500),
+ PROPERTY_ENTRY_STRING("firmware-name", "gsl3692-jumper-ezpad-6-pro.fw"),
+ PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+ PROPERTY_ENTRY_BOOL("silead,home-button"),
+ { }
+};
+
+static const struct silead_ts_dmi_data jumper_ezpad_6_pro_data = {
+ .acpi_name = "MSSL1680:00",
+ .properties = jumper_ezpad_6_pro_props,
+};
+
static const struct property_entry dexp_ursus_7w_props[] = {
PROPERTY_ENTRY_U32("touchscreen-size-x", 890),
PROPERTY_ENTRY_U32("touchscreen-size-y", 630),
.properties = pipo_w2s_props,
};
-static const struct property_entry pov_mobii_wintab_p800w_props[] = {
+static const struct property_entry pov_mobii_wintab_p800w_v20_props[] = {
+ PROPERTY_ENTRY_U32("touchscreen-min-x", 32),
+ PROPERTY_ENTRY_U32("touchscreen-min-y", 16),
+ PROPERTY_ENTRY_U32("touchscreen-size-x", 1692),
+ PROPERTY_ENTRY_U32("touchscreen-size-y", 1146),
+ PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
+ PROPERTY_ENTRY_STRING("firmware-name",
+ "gsl3680-pov-mobii-wintab-p800w-v20.fw"),
+ PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+ PROPERTY_ENTRY_BOOL("silead,home-button"),
+ { }
+};
+
+static const struct silead_ts_dmi_data pov_mobii_wintab_p800w_v20_data = {
+ .acpi_name = "MSSL1680:00",
+ .properties = pov_mobii_wintab_p800w_v20_props,
+};
+
+static const struct property_entry pov_mobii_wintab_p800w_v21_props[] = {
PROPERTY_ENTRY_U32("touchscreen-size-x", 1800),
PROPERTY_ENTRY_U32("touchscreen-size-y", 1150),
PROPERTY_ENTRY_BOOL("touchscreen-swapped-x-y"),
{ }
};
-static const struct silead_ts_dmi_data pov_mobii_wintab_p800w_data = {
+static const struct silead_ts_dmi_data pov_mobii_wintab_p800w_v21_data = {
.acpi_name = "MSSL1680:00",
- .properties = pov_mobii_wintab_p800w_props,
+ .properties = pov_mobii_wintab_p800w_v21_props,
};
static const struct property_entry itworks_tw891_props[] = {
.properties = teclast_x3_plus_props,
};
+static const struct property_entry onda_v891w_v1_props[] = {
+ PROPERTY_ENTRY_U32("touchscreen-min-x", 46),
+ PROPERTY_ENTRY_U32("touchscreen-min-y", 8),
+ PROPERTY_ENTRY_U32("touchscreen-size-x", 1676),
+ PROPERTY_ENTRY_U32("touchscreen-size-y", 1130),
+ PROPERTY_ENTRY_STRING("firmware-name",
+ "gsl3680-onda-v891w-v1.fw"),
+ PROPERTY_ENTRY_U32("silead,max-fingers", 10),
+ PROPERTY_ENTRY_BOOL("silead,home-button"),
+ { }
+};
+
+static const struct silead_ts_dmi_data onda_v891w_v1_data = {
+ .acpi_name = "MSSL1680:00",
+ .properties = onda_v891w_v1_props,
+};
+
static const struct dmi_system_id silead_ts_dmi_table[] = {
{
/* CUBE iwork8 Air */
DMI_MATCH(DMI_BIOS_VERSION, "jumperx.T87.KFBNEEA"),
},
},
+ {
+ /* Jumper EZpad 6 Pro */
+ .driver_data = (void *)&jumper_ezpad_6_pro_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Jumper"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "EZpad"),
+ DMI_MATCH(DMI_BIOS_VERSION, "5.12"),
+ /* Above matches are too generic, add bios-date match */
+ DMI_MATCH(DMI_BIOS_DATE, "08/18/2017"),
+ },
+ },
{
/* DEXP Ursus 7W */
.driver_data = (void *)&dexp_ursus_7w_data,
},
},
{
- /* Point of View mobii wintab p800w */
- .driver_data = (void *)&pov_mobii_wintab_p800w_data,
+ /* Point of View mobii wintab p800w (v2.0) */
+ .driver_data = (void *)&pov_mobii_wintab_p800w_v20_data,
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
+ DMI_MATCH(DMI_BIOS_VERSION, "3BAIR1014"),
+ /* Above matches are too generic, add bios-date match */
+ DMI_MATCH(DMI_BIOS_DATE, "10/24/2014"),
+ },
+ },
+ {
+ /* Point of View mobii wintab p800w (v2.1) */
+ .driver_data = (void *)&pov_mobii_wintab_p800w_v21_data,
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "Aptio CRB"),
DMI_MATCH(DMI_PRODUCT_NAME, "S806"),
},
},
+ {
+ /* Chuwi Hi8 (H1D_S806_206) */
+ .driver_data = (void *)&chuwi_hi8_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "BayTrail"),
+ DMI_MATCH(DMI_BIOS_VERSION, "H1D_S806_206"),
+ },
+ },
{
/* Chuwi Vi8 (CWI506) */
.driver_data = (void *)&chuwi_vi8_data,
DMI_MATCH(DMI_PRODUCT_NAME, "Y8W81"),
},
},
+ {
+ /* ONDA V891w revision P891WBEBV1B00 aka v1 */
+ .driver_data = (void *)&onda_v891w_v1_data,
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ONDA"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "ONDA Tablet"),
+ DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V001"),
+ /* Exact match, different versions need different fw */
+ DMI_EXACT_MATCH(DMI_BIOS_VERSION, "ONDA.W89EBBN08"),
+ },
+ },
{ },
};
TP_HKEY_EV_ALARM_BAT_XHOT = 0x6012, /* battery critically hot */
TP_HKEY_EV_ALARM_SENSOR_HOT = 0x6021, /* sensor too hot */
TP_HKEY_EV_ALARM_SENSOR_XHOT = 0x6022, /* sensor critically hot */
- TP_HKEY_EV_THM_TABLE_CHANGED = 0x6030, /* thermal table changed */
+ TP_HKEY_EV_THM_TABLE_CHANGED = 0x6030, /* windows; thermal table changed */
+ TP_HKEY_EV_THM_CSM_COMPLETED = 0x6032, /* windows; thermal control set
+ * command completed. Related to
+ * AML DYTC */
+ TP_HKEY_EV_THM_TRANSFM_CHANGED = 0x60F0, /* windows; thermal transformation
+ * changed. Related to AML GMTS */
/* AC-related events */
TP_HKEY_EV_AC_CHANGED = 0x6040, /* AC status changed */
bool *send_acpi_ev,
bool *ignore_acpi_ev)
{
- bool known = true;
-
/* 0x6000-0x6FFF: thermal alarms/notices and keyboard events */
*send_acpi_ev = true;
*ignore_acpi_ev = false;
switch (hkey) {
case TP_HKEY_EV_THM_TABLE_CHANGED:
- pr_info("EC reports that Thermal Table has changed\n");
+ pr_debug("EC reports: Thermal Table has changed\n");
+ /* recommended action: do nothing, we don't have
+ * Lenovo ATM information */
+ return true;
+ case TP_HKEY_EV_THM_CSM_COMPLETED:
+ pr_debug("EC reports: Thermal Control Command set completed (DYTC)\n");
+ /* recommended action: do nothing, we don't have
+ * Lenovo ATM information */
+ return true;
+ case TP_HKEY_EV_THM_TRANSFM_CHANGED:
+ pr_debug("EC reports: Thermal Transformation changed (GMTS)\n");
/* recommended action: do nothing, we don't have
* Lenovo ATM information */
return true;
tpacpi_input_send_tabletsw();
hotkey_tablet_mode_notify_change();
*send_acpi_ev = false;
- break;
+ return true;
case TP_HKEY_EV_PALM_DETECTED:
case TP_HKEY_EV_PALM_UNDETECTED:
return true;
default:
- pr_warn("unknown possible thermal alarm or keyboard event received\n");
- known = false;
+ /* report simply as unknown, no sensor dump */
+ return false;
}
thermal_dump_all_sensors();
-
- return known;
+ return true;
}
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
* struct mlxreg_core_data - attributes control data:
*
* @label: attribute label;
- * @label: attribute register offset;
* @reg: attribute register;
* @mask: attribute access mask;
- * @mode: access mode;
* @bit: attribute effective bit;
+ * @mode: access mode;
* @np - pointer to node platform associated with attribute;
* @hpdev - hotplug device data;
* @health_cntr: dynamic device health indication counter;
#include <linux/types.h>
struct file;
+struct task_struct;
/* Descriptions of the types of units to
* print in */
git.samba.org / sfrench / cifs-2.6.git / commitdiff