* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
e1000: Add device IDs of blade version of the 82571 quad port
sky2: fix transmit state on resume
sky2: FE+ vlan workaround
sky2: sky2 FE+ receive status workaround
do {
size = sizeof(struct e820entry);
- id = SMAP;
+
+ /* Important: %edx is clobbered by some BIOSes,
+ so it must be either used for the error output
+ or explicitly marked clobbered. */
asm("int $0x15; setc %0"
- : "=am" (err), "+b" (next), "+d" (id), "+c" (size),
+ : "=d" (err), "+b" (next), "=a" (id), "+c" (size),
"=m" (*desc)
- : "D" (desc), "a" (0xe820));
+ : "D" (desc), "d" (SMAP), "a" (0xe820));
/* Some BIOSes stop returning SMAP in the middle of
the search loop. We don't know exactly how the BIOS
PTR compat_sys_signalfd
PTR compat_sys_timerfd
PTR sys_eventfd
- PTR sys_fallocate /* 4320 */
+ PTR sys32_fallocate /* 4320 */
.size sys_call_table,.-sys_call_table
static int __init uart8250_init(void)
{
- uart8250_data[0].iobase = (unsigned long) &mace->isa.serial1;
- uart8250_data[1].iobase = (unsigned long) &mace->isa.serial1;
+ uart8250_data[0].membase = (void __iomem *) &mace->isa.serial1;
+ uart8250_data[1].membase = (void __iomem *) &mace->isa.serial1;
return platform_device_register(&uart8250_device);
}
#define I915REG_INT_MASK_R 0x020a8
#define I915REG_INT_ENABLE_R 0x020a0
+#define I915REG_PIPEASTAT 0x70024
+#define I915REG_PIPEBSTAT 0x71024
+
+#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
+#define I915_VBLANK_CLEAR (1UL<<1)
+
#define SRX_INDEX 0x3c4
#define SRX_DATA 0x3c5
#define SR01 1
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
u16 temp;
+ u32 pipea_stats, pipeb_stats;
+
+ pipea_stats = I915_READ(I915REG_PIPEASTAT);
+ pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
temp = I915_READ16(I915REG_INT_IDENTITY_R);
return IRQ_NONE;
I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
+ (void) I915_READ16(I915REG_INT_IDENTITY_R);
+ DRM_READMEMORYBARRIER();
dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
if (dev_priv->swaps_pending > 0)
drm_locked_tasklet(dev, i915_vblank_tasklet);
+ I915_WRITE(I915REG_PIPEASTAT,
+ pipea_stats|I915_VBLANK_INTERRUPT_ENABLE|
+ I915_VBLANK_CLEAR);
+ I915_WRITE(I915REG_PIPEBSTAT,
+ pipeb_stats|I915_VBLANK_INTERRUPT_ENABLE|
+ I915_VBLANK_CLEAR);
}
return IRQ_HANDLED;
/*
* __pa()/__va() should be used only during mem init.
*/
-#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
+#ifdef CONFIG_64BIT
#define __pa(x) \
({ \
unsigned long __x = (unsigned long)(x); \