Merge branch 'x86/cpufeature' into irq/numa
authorIngo Molnar <mingo@elte.hu>
Mon, 1 Jun 2009 20:29:35 +0000 (22:29 +0200)
committerIngo Molnar <mingo@elte.hu>
Mon, 1 Jun 2009 20:30:01 +0000 (22:30 +0200)
Merge reason: irq/numa didnt build because this commit:

  2759c32: x86: don't call read_apic_id if !cpu_has_apic

Had a dependency on x86/cpufeature changes. Pull in that
(small) branch to fix the dependency.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
975 files changed:
Documentation/ABI/testing/sysfs-kernel-slab [new file with mode: 0644]
Documentation/DocBook/kgdb.tmpl
Documentation/filesystems/tmpfs.txt
Documentation/hwmon/sysfs-interface
Documentation/input/multi-touch-protocol.txt
Documentation/kernel-parameters.txt
Documentation/lockdep-design.txt
Documentation/networking/ip-sysctl.txt
Documentation/sound/alsa/HD-Audio-Models.txt
Documentation/sound/alsa/Procfile.txt
Documentation/sysctl/vm.txt
Documentation/sysfs-rules.txt
MAINTAINERS
Makefile
arch/alpha/include/asm/percpu.h
arch/alpha/kernel/sys_dp264.c
arch/alpha/kernel/sys_titan.c
arch/arm/Kconfig
arch/arm/common/gic.c
arch/arm/configs/kirkwood_defconfig
arch/arm/configs/mv78xx0_defconfig
arch/arm/configs/mx31moboard_defconfig [deleted file]
arch/arm/configs/mx3_defconfig
arch/arm/configs/orion5x_defconfig
arch/arm/include/asm/assembler.h
arch/arm/include/asm/atomic.h
arch/arm/include/asm/elf.h
arch/arm/include/asm/flat.h
arch/arm/include/asm/hardware/gic.h
arch/arm/include/asm/smp.h
arch/arm/include/asm/system.h
arch/arm/kernel/elf.c
arch/arm/kernel/entry-armv.S
arch/arm/kernel/module.c
arch/arm/kernel/smp.c
arch/arm/lib/bitops.h
arch/arm/mach-davinci/board-dm644x-evm.c
arch/arm/mach-davinci/include/mach/asp.h [new file with mode: 0644]
arch/arm/mach-ep93xx/clock.c
arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
arch/arm/mach-gemini/include/mach/hardware.h
arch/arm/mach-integrator/core.c
arch/arm/mach-ixp4xx/ixp4xx_npe.c
arch/arm/mach-kirkwood/common.c
arch/arm/mach-kirkwood/ts219-setup.c
arch/arm/mach-l7200/include/mach/sys-clock.h
arch/arm/mach-loki/common.c
arch/arm/mach-mmp/include/mach/mfp-pxa168.h
arch/arm/mach-mmp/include/mach/mfp-pxa910.h
arch/arm/mach-mmp/include/mach/mfp.h
arch/arm/mach-mmp/time.c
arch/arm/mach-mv78xx0/common.c
arch/arm/mach-omap2/clock24xx.c
arch/arm/mach-omap2/clock34xx.c
arch/arm/mach-omap2/clock34xx.h
arch/arm/mach-omap2/devices.c
arch/arm/mach-omap2/prm-regbits-34xx.h
arch/arm/mach-omap2/usb-tusb6010.c
arch/arm/mach-orion5x/common.c
arch/arm/mach-pxa/Kconfig
arch/arm/mach-pxa/ezx.c
arch/arm/mach-pxa/include/mach/reset.h
arch/arm/mach-pxa/mfp-pxa2xx.c
arch/arm/mach-pxa/palmld.c
arch/arm/mach-pxa/palmt5.c
arch/arm/mach-pxa/palmtx.c
arch/arm/mach-pxa/reset.c
arch/arm/mach-pxa/spitz.c
arch/arm/mach-pxa/tosa.c
arch/arm/mach-pxa/viper.c
arch/arm/mach-realview/core.c
arch/arm/mach-realview/include/mach/smp.h
arch/arm/mach-realview/localtimer.c
arch/arm/mach-realview/platsmp.c
arch/arm/mach-s3c2410/mach-bast.c
arch/arm/mach-s3c2412/pm.c
arch/arm/mach-s3c6400/include/mach/map.h
arch/arm/mach-versatile/core.c
arch/arm/nwfpe/fpa11.h
arch/arm/nwfpe/fpa11_cprt.c
arch/arm/nwfpe/softfloat.h
arch/arm/plat-mxc/dma-mx1-mx2.c
arch/arm/plat-mxc/gpio.c
arch/arm/plat-mxc/include/mach/board-mx27ads.h
arch/arm/plat-omap/fb.c
arch/arm/plat-omap/gpio.c
arch/arm/plat-s3c/clock.c
arch/arm/plat-s3c24xx/dma.c
arch/arm/plat-s3c64xx/gpiolib.c
arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
arch/arm/tools/mach-types
arch/blackfin/include/asm/.gitignore [deleted file]
arch/blackfin/include/asm/flat.h
arch/blackfin/include/asm/unistd.h
arch/blackfin/kernel/.gitignore [new file with mode: 0644]
arch/blackfin/lib/strncmp.c
arch/blackfin/mach-common/entry.S
arch/cris/Makefile
arch/cris/arch-v10/boot/Makefile [deleted file]
arch/cris/arch-v10/boot/compressed/README [deleted file]
arch/cris/arch-v10/boot/compressed/misc.c [deleted file]
arch/cris/arch-v10/kernel/entry.S
arch/cris/arch-v32/boot/compressed/Makefile [deleted file]
arch/cris/arch-v32/boot/rescue/Makefile [deleted file]
arch/cris/arch-v32/drivers/mach-a3/gpio.c
arch/cris/arch-v32/kernel/Makefile
arch/cris/arch-v32/kernel/entry.S
arch/cris/arch-v32/kernel/irq.c
arch/cris/boot/.gitignore [moved from arch/cris/arch-v10/boot/.gitignore with 100% similarity]
arch/cris/boot/Makefile [moved from arch/cris/arch-v32/boot/Makefile with 65% similarity]
arch/cris/boot/compressed/Makefile [moved from arch/cris/arch-v10/boot/compressed/Makefile with 50% similarity]
arch/cris/boot/compressed/README [moved from arch/cris/arch-v32/boot/compressed/README with 100% similarity]
arch/cris/boot/compressed/decompress_v10.lds [moved from arch/cris/arch-v10/boot/compressed/decompress.lds with 100% similarity]
arch/cris/boot/compressed/decompress_v32.lds [moved from arch/cris/arch-v32/boot/compressed/decompress.lds with 100% similarity]
arch/cris/boot/compressed/head_v10.S [moved from arch/cris/arch-v10/boot/compressed/head.S with 97% similarity]
arch/cris/boot/compressed/head_v32.S [moved from arch/cris/arch-v32/boot/compressed/head.S with 94% similarity]
arch/cris/boot/compressed/misc.c [moved from arch/cris/arch-v32/boot/compressed/misc.c with 65% similarity]
arch/cris/boot/rescue/Makefile [moved from arch/cris/arch-v10/boot/rescue/Makefile with 63% similarity]
arch/cris/boot/rescue/head_v10.S [moved from arch/cris/arch-v10/boot/rescue/head.S with 99% similarity]
arch/cris/boot/rescue/head_v32.S [moved from arch/cris/arch-v32/boot/rescue/head.S with 100% similarity]
arch/cris/boot/rescue/kimagerescue.S [moved from arch/cris/arch-v10/boot/rescue/kimagerescue.S with 100% similarity]
arch/cris/boot/rescue/rescue_v10.lds [moved from arch/cris/arch-v10/boot/rescue/rescue.lds with 100% similarity]
arch/cris/boot/rescue/rescue_v32.lds [moved from arch/cris/arch-v32/boot/rescue/rescue.lds with 100% similarity]
arch/cris/boot/rescue/testrescue.S [moved from arch/cris/arch-v10/boot/rescue/testrescue.S with 100% similarity]
arch/cris/boot/tools/build.c [moved from arch/cris/arch-v10/boot/tools/build.c with 100% similarity]
arch/cris/include/asm/unistd.h
arch/h8300/include/asm/flat.h
arch/ia64/hp/sim/hpsim_irq.c
arch/ia64/include/asm/idle.h [new file with mode: 0644]
arch/ia64/include/asm/xen/events.h
arch/ia64/kernel/acpi.c
arch/ia64/kernel/iosapic.c
arch/ia64/kernel/msi_ia64.c
arch/ia64/sn/kernel/irq.c
arch/ia64/sn/kernel/msi_sn.c
arch/ia64/xen/xensetup.S
arch/m32r/include/asm/flat.h
arch/m68k/include/asm/flat.h
arch/microblaze/configs/nommu_defconfig
arch/microblaze/kernel/cpu/cpuinfo-static.c
arch/microblaze/kernel/intc.c
arch/microblaze/kernel/sys_microblaze.c
arch/mips/Kconfig
arch/mips/Makefile
arch/mips/alchemy/common/time.c
arch/mips/cavium-octeon/csrc-octeon.c
arch/mips/cavium-octeon/octeon-irq.c
arch/mips/include/asm/bitops.h
arch/mips/include/asm/checksum.h
arch/mips/include/asm/compat.h
arch/mips/include/asm/cpu-features.h
arch/mips/include/asm/div64.h
arch/mips/include/asm/dma-mapping.h
arch/mips/include/asm/fixmap.h
arch/mips/include/asm/hazards.h
arch/mips/include/asm/highmem.h
arch/mips/include/asm/irq.h
arch/mips/include/asm/mach-au1x00/au1000.h
arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h [new file with mode: 0644]
arch/mips/include/asm/mipsregs.h
arch/mips/include/asm/page.h
arch/mips/include/asm/pgtable-64.h
arch/mips/include/asm/sn/addrs.h
arch/mips/include/asm/sn/nmi.h
arch/mips/include/asm/thread_info.h
arch/mips/include/asm/time.h
arch/mips/include/asm/uaccess.h
arch/mips/kernel/cevt-smtc.c
arch/mips/kernel/irq-gic.c
arch/mips/kernel/scall64-n32.S
arch/mips/kernel/scall64-o32.S
arch/mips/kernel/unaligned.c
arch/mips/lib/dump_tlb.c
arch/mips/mm/c-r4k.c
arch/mips/mm/dma-default.c
arch/mips/mm/highmem.c
arch/mips/mm/init.c
arch/mips/mm/sc-rm7k.c
arch/mips/mm/tlb-r3k.c
arch/mips/mm/tlb-r4k.c
arch/mips/mm/tlb-r8k.c
arch/mips/mti-malta/malta-smtc.c
arch/mips/pmc-sierra/Kconfig
arch/mips/pmc-sierra/msp71xx/msp_prom.c
arch/mips/pmc-sierra/msp71xx/msp_setup.c
arch/mips/pmc-sierra/msp71xx/msp_time.c
arch/mips/sgi-ip22/ip22-reset.c
arch/mips/sgi-ip32/ip32-berr.c
arch/mips/sgi-ip32/ip32-irq.c
arch/mips/sgi-ip32/ip32-reset.c
arch/mips/sibyte/bcm1480/irq.c
arch/mips/sibyte/sb1250/irq.c
arch/mips/txx9/generic/setup_tx4927.c
arch/mips/txx9/generic/setup_tx4938.c
arch/mips/txx9/generic/setup_tx4939.c
arch/mips/txx9/rbtx4939/setup.c
arch/parisc/kernel/irq.c
arch/powerpc/Kconfig
arch/powerpc/boot/Makefile
arch/powerpc/boot/mktree.c
arch/powerpc/configs/83xx/asp8347_defconfig
arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
arch/powerpc/configs/83xx/mpc832x_mds_defconfig
arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
arch/powerpc/configs/83xx/mpc834x_itx_defconfig
arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
arch/powerpc/configs/83xx/mpc834x_mds_defconfig
arch/powerpc/configs/83xx/mpc836x_mds_defconfig
arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
arch/powerpc/configs/83xx/mpc837x_mds_defconfig
arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
arch/powerpc/configs/83xx/sbc834x_defconfig
arch/powerpc/configs/85xx/ksi8560_defconfig
arch/powerpc/configs/85xx/mpc8540_ads_defconfig
arch/powerpc/configs/85xx/mpc8560_ads_defconfig
arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
arch/powerpc/configs/85xx/sbc8548_defconfig
arch/powerpc/configs/85xx/sbc8560_defconfig
arch/powerpc/configs/85xx/socrates_defconfig
arch/powerpc/configs/85xx/stx_gp3_defconfig
arch/powerpc/configs/85xx/tqm8540_defconfig
arch/powerpc/configs/85xx/tqm8541_defconfig
arch/powerpc/configs/85xx/tqm8548_defconfig
arch/powerpc/configs/85xx/tqm8555_defconfig
arch/powerpc/configs/85xx/tqm8560_defconfig
arch/powerpc/configs/86xx/gef_ppc9a_defconfig
arch/powerpc/configs/86xx/gef_sbc310_defconfig
arch/powerpc/configs/86xx/gef_sbc610_defconfig
arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
arch/powerpc/configs/86xx/sbc8641d_defconfig
arch/powerpc/configs/adder875_defconfig
arch/powerpc/configs/c2k_defconfig
arch/powerpc/configs/ep8248e_defconfig
arch/powerpc/configs/ep88xc_defconfig
arch/powerpc/configs/linkstation_defconfig
arch/powerpc/configs/mgcoge_defconfig
arch/powerpc/configs/mgsuvd_defconfig
arch/powerpc/configs/mpc7448_hpc2_defconfig
arch/powerpc/configs/mpc8272_ads_defconfig
arch/powerpc/configs/mpc83xx_defconfig
arch/powerpc/configs/mpc866_ads_defconfig
arch/powerpc/configs/mpc86xx_defconfig
arch/powerpc/configs/mpc885_ads_defconfig
arch/powerpc/configs/pq2fads_defconfig
arch/powerpc/configs/prpmc2800_defconfig
arch/powerpc/configs/ps3_defconfig
arch/powerpc/configs/storcenter_defconfig
arch/powerpc/include/asm/dma-mapping.h
arch/powerpc/include/asm/fixmap.h
arch/powerpc/include/asm/iseries/iommu.h
arch/powerpc/include/asm/pgtable-ppc32.h
arch/powerpc/include/asm/system.h
arch/powerpc/kernel/cputable.c
arch/powerpc/kernel/dma.c
arch/powerpc/kernel/ftrace.c
arch/powerpc/kernel/machine_kexec.c
arch/powerpc/kernel/pci-common.c
arch/powerpc/kernel/pci_64.c
arch/powerpc/kernel/prom.c
arch/powerpc/kernel/vmlinux.lds.S
arch/powerpc/lib/Makefile
arch/powerpc/lib/dma-noncoherent.c [deleted file]
arch/powerpc/mm/Makefile
arch/powerpc/mm/dma-noncoherent.c [new file with mode: 0644]
arch/powerpc/mm/init_32.c
arch/powerpc/mm/mem.c
arch/powerpc/mm/mmu_context_nohash.c
arch/powerpc/mm/pgtable.c
arch/powerpc/mm/pgtable_32.c
arch/powerpc/oprofile/op_model_power4.c
arch/powerpc/platforms/40x/Kconfig
arch/powerpc/platforms/44x/Kconfig
arch/powerpc/platforms/cell/ras.c
arch/powerpc/platforms/iseries/Kconfig
arch/powerpc/platforms/iseries/iommu.c
arch/powerpc/platforms/iseries/pci.c
arch/powerpc/platforms/maple/pci.c
arch/powerpc/platforms/pseries/xics.c
arch/powerpc/sysdev/fsl_soc.c
arch/powerpc/sysdev/mpic.c
arch/powerpc/sysdev/mpic.h
arch/powerpc/sysdev/xilinx_intc.c
arch/sh/boards/board-ap325rxa.c
arch/sh/include/asm/flat.h
arch/sparc/include/asm/elf_64.h
arch/sparc/kernel/irq_64.c
arch/sparc/lib/csum_copy_from_user.S
arch/sparc/lib/csum_copy_to_user.S
arch/x86/Kconfig
arch/x86/boot/compressed/relocs.c
arch/x86/boot/memory.c
arch/x86/configs/x86_64_defconfig
arch/x86/include/asm/apic.h
arch/x86/include/asm/apicdef.h
arch/x86/include/asm/hw_irq.h
arch/x86/include/asm/i8259.h
arch/x86/include/asm/io_apic.h
arch/x86/include/asm/irq_remapping.h
arch/x86/include/asm/irq_vectors.h
arch/x86/include/asm/mpspec.h
arch/x86/include/asm/paravirt.h
arch/x86/include/asm/percpu.h
arch/x86/include/asm/ptrace.h
arch/x86/include/asm/setup.h
arch/x86/include/asm/smp.h
arch/x86/include/asm/spinlock.h
arch/x86/kernel/Makefile
arch/x86/kernel/acpi/boot.c
arch/x86/kernel/amd_iommu_init.c
arch/x86/kernel/apic/apic.c
arch/x86/kernel/apic/apic_flat_64.c
arch/x86/kernel/apic/es7000_32.c
arch/x86/kernel/apic/io_apic.c
arch/x86/kernel/apic/probe_64.c
arch/x86/kernel/apic/summit_32.c
arch/x86/kernel/apic/x2apic_uv_x.c
arch/x86/kernel/cpu/amd.c
arch/x86/kernel/cpu/common.c
arch/x86/kernel/cpu/cpu_debug.c
arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c
arch/x86/kernel/cpu/cpufreq/p4-clockmod.c
arch/x86/kernel/cpu/cpufreq/powernow-k7.c
arch/x86/kernel/cpu/cpufreq/powernow-k8.c
arch/x86/kernel/cpu/intel.c
arch/x86/kernel/cpu/mcheck/mce_intel_64.c
arch/x86/kernel/cpu/mtrr/generic.c
arch/x86/kernel/cpu/proc.c
arch/x86/kernel/e820.c
arch/x86/kernel/ftrace.c
arch/x86/kernel/irq.c
arch/x86/kernel/irqinit.c [moved from arch/x86/kernel/irqinit_32.c with 68% similarity]
arch/x86/kernel/irqinit_64.c [deleted file]
arch/x86/kernel/kgdb.c
arch/x86/kernel/machine_kexec_32.c
arch/x86/kernel/machine_kexec_64.c
arch/x86/kernel/mpparse.c
arch/x86/kernel/paravirt.c
arch/x86/kernel/reboot.c
arch/x86/kernel/setup.c
arch/x86/kernel/setup_percpu.c
arch/x86/kernel/smp.c
arch/x86/kernel/smpboot.c
arch/x86/kernel/traps.c
arch/x86/kvm/mmu.c
arch/x86/kvm/svm.c
arch/x86/kvm/x86.c
arch/x86/lguest/boot.c
arch/x86/mm/hugetlbpage.c
arch/x86/mm/init.c
arch/x86/mm/kmmio.c
arch/x86/mm/pageattr.c
arch/x86/mm/srat_32.c
arch/x86/mm/srat_64.c
arch/x86/oprofile/backtrace.c
arch/x86/pci/irq.c
arch/x86/vdso/vclock_gettime.c
arch/x86/xen/Makefile
arch/x86/xen/mmu.c
arch/x86/xen/xen-ops.h
arch/xtensa/Kconfig
arch/xtensa/configs/s6105_defconfig
arch/xtensa/include/asm/checksum.h
arch/xtensa/include/asm/timex.h
arch/xtensa/kernel/Makefile
arch/xtensa/kernel/traps.c
arch/xtensa/kernel/vmlinux.lds.S
arch/xtensa/platforms/s6105/setup.c
arch/xtensa/variants/s6000/Makefile
arch/xtensa/variants/s6000/delay.c [new file with mode: 0644]
arch/xtensa/variants/s6000/gpio.c
arch/xtensa/variants/s6000/include/variant/gpio.h [new file with mode: 0644]
block/blk-core.c
crypto/api.c
crypto/eseqiv.c
drivers/acpi/acpica/Makefile
drivers/acpi/acpica/aclocal.h
drivers/acpi/bus.c
drivers/acpi/pci_bind.c
drivers/acpi/pci_irq.c
drivers/acpi/processor_idle.c
drivers/acpi/processor_perflib.c
drivers/acpi/processor_throttling.c
drivers/acpi/video.c
drivers/ata/ata_piix.c
drivers/ata/libata-core.c
drivers/ata/libata-eh.c
drivers/ata/libata-scsi.c
drivers/ata/pata_pdc202xx_old.c
drivers/ata/sata_fsl.c
drivers/ata/sata_mv.c
drivers/ata/sata_sx4.c
drivers/base/bus.c
drivers/base/core.c
drivers/base/driver.c
drivers/base/iommu.c
drivers/base/platform.c
drivers/base/power/main.c
drivers/block/xen-blkfront.c
drivers/cdrom/viocd.c
drivers/char/hpet.c
drivers/char/ipmi/ipmi_msghandler.c
drivers/char/random.c
drivers/char/sysrq.c
drivers/char/tpm/tpm_bios.c
drivers/char/vt_ioctl.c
drivers/cpufreq/cpufreq.c
drivers/cpufreq/cpufreq_conservative.c
drivers/cpufreq/cpufreq_ondemand.c
drivers/crypto/ixp4xx_crypto.c
drivers/crypto/padlock-aes.c
drivers/dma/dmaengine.c
drivers/dma/dmatest.c
drivers/dma/fsldma.c
drivers/dma/ioat_dma.c
drivers/dma/ipu/ipu_idmac.c
drivers/edac/Kconfig
drivers/edac/Makefile
drivers/edac/amd8111_edac.c
drivers/edac/amd8131_edac.c
drivers/gpu/drm/Kconfig
drivers/gpu/drm/drm_bufs.c
drivers/gpu/drm/drm_crtc_helper.c
drivers/gpu/drm/drm_drv.c
drivers/gpu/drm/drm_stub.c
drivers/gpu/drm/drm_sysfs.c
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/i915_gem.c
drivers/gpu/drm/i915/i915_gem_tiling.c
drivers/gpu/drm/i915/i915_reg.h
drivers/gpu/drm/i915/i915_suspend.c
drivers/gpu/drm/i915/intel_bios.c
drivers/gpu/drm/i915/intel_bios.h
drivers/gpu/drm/i915/intel_crt.c
drivers/gpu/drm/i915/intel_display.c
drivers/gpu/drm/i915/intel_drv.h
drivers/gpu/drm/i915/intel_fb.c
drivers/gpu/drm/i915/intel_hdmi.c
drivers/gpu/drm/i915/intel_i2c.c
drivers/gpu/drm/i915/intel_lvds.c
drivers/gpu/drm/i915/intel_modes.c
drivers/gpu/drm/i915/intel_sdvo.c
drivers/gpu/drm/r128/r128_cce.c
drivers/gpu/drm/radeon/radeon_drv.h
drivers/hid/hid-ids.h
drivers/hid/usbhid/hid-core.c
drivers/hid/usbhid/hid-quirks.c
drivers/hwmon/asus_atk0110.c
drivers/hwmon/lm78.c
drivers/hwmon/w83781d.c
drivers/i2c/algos/i2c-algo-bit.c
drivers/i2c/algos/i2c-algo-pca.c
drivers/i2c/busses/Kconfig
drivers/i2c/busses/i2c-ali1535.c
drivers/i2c/busses/i2c-ali15x3.c
drivers/i2c/busses/i2c-amd756.c
drivers/i2c/busses/i2c-cpm.c
drivers/i2c/busses/i2c-i801.c
drivers/i2c/busses/i2c-isch.c
drivers/i2c/busses/i2c-mpc.c
drivers/i2c/busses/i2c-nforce2.c
drivers/i2c/busses/i2c-pxa.c
drivers/i2c/busses/i2c-sis5595.c
drivers/i2c/busses/i2c-sis630.c
drivers/i2c/busses/i2c-sis96x.c
drivers/ide/icside.c
drivers/ide/ide-io.c
drivers/ide/ide-iops.c
drivers/ide/ide-lib.c
drivers/ide/ide-pci-generic.c
drivers/ide/ide-probe.c
drivers/ide/ide-tape.c
drivers/ide/piix.c
drivers/ide/via82cxxx.c
drivers/idle/i7300_idle.c
drivers/infiniband/hw/cxgb3/cxio_hal.c
drivers/infiniband/hw/ipath/ipath_fs.c
drivers/infiniband/hw/mlx4/mlx4_ib.h
drivers/infiniband/hw/mlx4/mr.c
drivers/infiniband/hw/mlx4/qp.c
drivers/input/ff-memless.c
drivers/input/input.c
drivers/input/joydev.c
drivers/input/keyboard/atkbd.c
drivers/input/serio/ambakmi.c
drivers/input/serio/libps2.c
drivers/input/touchscreen/tsc2007.c
drivers/input/touchscreen/ucb1400_ts.c
drivers/isdn/capi/capifs.c
drivers/isdn/gigaset/isocdata.c
drivers/lguest/x86/core.c
drivers/md/bitmap.c
drivers/md/md.c
drivers/md/raid10.c
drivers/md/raid5.c
drivers/media/radio/radio-sf16fmi.c
drivers/media/radio/radio-sf16fmr2.c
drivers/media/video/cafe_ccic.c
drivers/media/video/cx23885/cx23885-dvb.c
drivers/media/video/ivtv/ivtv-driver.c
drivers/media/video/ivtv/ivtv-gpio.c
drivers/media/video/ivtv/ivtv-ioctl.c
drivers/media/video/ivtv/ivtv-irq.c
drivers/media/video/ivtv/ivtv-yuv.c
drivers/media/video/ivtv/ivtvfb.c
drivers/media/video/uvc/uvc_driver.c
drivers/media/video/uvc/uvc_video.c
drivers/media/video/v4l2-ioctl.c
drivers/media/video/zoran/zoran_driver.c
drivers/mfd/pcf50633-core.c
drivers/mfd/wm8350-core.c
drivers/misc/enclosure.c
drivers/misc/isl29003.c
drivers/mmc/card/block.c
drivers/mmc/core/core.c
drivers/mmc/host/mmci.c
drivers/mmc/host/mvsdio.c
drivers/mmc/host/sdhci-pci.c
drivers/mmc/host/sdhci.h
drivers/mtd/devices/m25p80.c
drivers/mtd/devices/mtd_dataflash.c
drivers/mtd/mtdcore.c
drivers/mtd/mtdsuper.c
drivers/mtd/nand/mxc_nand.c
drivers/net/3c509.c
drivers/net/Makefile
drivers/net/arm/ixp4xx_eth.c
drivers/net/atl1e/atl1e_main.c
drivers/net/atlx/atl1.c
drivers/net/atlx/atlx.h
drivers/net/benet/be.h
drivers/net/benet/be_main.c
drivers/net/bfin_mac.c
drivers/net/bnx2.c
drivers/net/bonding/bond_3ad.c
drivers/net/bonding/bond_alb.c
drivers/net/bonding/bond_main.c
drivers/net/cxgb3/adapter.h
drivers/net/cxgb3/cxgb3_main.c
drivers/net/cxgb3/sge.c
drivers/net/cxgb3/t3_hw.c
drivers/net/e1000/e1000_main.c
drivers/net/ehea/ehea.h
drivers/net/ehea/ehea_main.c
drivers/net/gianfar.c
drivers/net/gianfar.h
drivers/net/igb/igb_main.c
drivers/net/mac8390.c
drivers/net/meth.c
drivers/net/mlx4/en_cq.c
drivers/net/mlx4/en_rx.c
drivers/net/mlx4/en_tx.c
drivers/net/mv643xx_eth.c
drivers/net/ne2k-pci.c
drivers/net/netconsole.c
drivers/net/r8169.c
drivers/net/usb/Kconfig
drivers/net/usb/Makefile
drivers/net/usb/cdc_eem.c [new file with mode: 0644]
drivers/net/usb/smsc95xx.c
drivers/net/usb/smsc95xx.h
drivers/net/virtio_net.c
drivers/net/vxge/vxge-traffic.c
drivers/net/wan/ixp4xx_hss.c
drivers/net/wimax/i2400m/rx.c
drivers/net/wimax/i2400m/usb.c
drivers/net/wireless/Kconfig
drivers/net/wireless/airo.c
drivers/net/wireless/at76c50x-usb.c
drivers/net/wireless/ath5k/base.c
drivers/net/wireless/ath5k/debug.c
drivers/net/wireless/ath5k/phy.c
drivers/net/wireless/ath5k/reset.c
drivers/net/wireless/iwlwifi/iwl-5000.c
drivers/net/wireless/iwlwifi/iwl-6000.c
drivers/net/wireless/iwlwifi/iwl-agn.c
drivers/net/wireless/iwlwifi/iwl-scan.c
drivers/net/wireless/iwlwifi/iwl-sta.c
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/rndis_wlan.c
drivers/net/wireless/rt2x00/rt2x00debug.c
drivers/net/wireless/rtl818x/rtl8187.h
drivers/net/wireless/rtl818x/rtl8187_dev.c
drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
drivers/oprofile/cpu_buffer.c
drivers/parisc/iosapic.c
drivers/parport/parport_gsc.c
drivers/pci/hotplug/acpiphp.h
drivers/pci/hotplug/acpiphp_glue.c
drivers/pci/hotplug/ibmphp_core.c
drivers/pci/htirq.c
drivers/pci/intel-iommu.c
drivers/pci/intr_remapping.c
drivers/pci/msi.c
drivers/pci/pci.c
drivers/pci/pcie/aer/aerdrv.h
drivers/pci/pcie/portdrv_pci.c
drivers/platform/x86/asus-laptop.c
drivers/platform/x86/eeepc-laptop.c
drivers/pnp/pnpacpi/core.c
drivers/pnp/pnpacpi/rsparser.c
drivers/regulator/da903x.c
drivers/rtc/rtc-pl030.c
drivers/rtc/rtc-pl031.c
drivers/rtc/rtc-twl4030.c
drivers/scsi/3w-9xxx.c
drivers/scsi/3w-xxxx.c
drivers/scsi/3w-xxxx.h
drivers/scsi/Kconfig
drivers/scsi/Makefile
drivers/scsi/fnic/Makefile [new file with mode: 0644]
drivers/scsi/fnic/cq_desc.h [new file with mode: 0644]
drivers/scsi/fnic/cq_enet_desc.h [new file with mode: 0644]
drivers/scsi/fnic/cq_exch_desc.h [new file with mode: 0644]
drivers/scsi/fnic/fcpio.h [new file with mode: 0644]
drivers/scsi/fnic/fnic.h [new file with mode: 0644]
drivers/scsi/fnic/fnic_attrs.c [new file with mode: 0644]
drivers/scsi/fnic/fnic_fcs.c [new file with mode: 0644]
drivers/scsi/fnic/fnic_io.h [new file with mode: 0644]
drivers/scsi/fnic/fnic_isr.c [new file with mode: 0644]
drivers/scsi/fnic/fnic_main.c [new file with mode: 0644]
drivers/scsi/fnic/fnic_res.c [new file with mode: 0644]
drivers/scsi/fnic/fnic_res.h [new file with mode: 0644]
drivers/scsi/fnic/fnic_scsi.c [new file with mode: 0644]
drivers/scsi/fnic/rq_enet_desc.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_cq.c [new file with mode: 0644]
drivers/scsi/fnic/vnic_cq.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_cq_copy.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_dev.c [new file with mode: 0644]
drivers/scsi/fnic/vnic_dev.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_devcmd.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_intr.c [new file with mode: 0644]
drivers/scsi/fnic/vnic_intr.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_nic.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_resource.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_rq.c [new file with mode: 0644]
drivers/scsi/fnic/vnic_rq.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_scsi.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_stats.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_wq.c [new file with mode: 0644]
drivers/scsi/fnic/vnic_wq.h [new file with mode: 0644]
drivers/scsi/fnic/vnic_wq_copy.c [new file with mode: 0644]
drivers/scsi/fnic/vnic_wq_copy.h [new file with mode: 0644]
drivers/scsi/fnic/wq_enet_desc.h [new file with mode: 0644]
drivers/scsi/mpt2sas/mpt2sas_base.h
drivers/scsi/osd/osd_uld.c
drivers/scsi/scsi_scan.c
drivers/scsi/scsi_transport_iscsi.c
drivers/serial/8250.c
drivers/serial/8250_gsc.c
drivers/serial/amba-pl010.c
drivers/serial/amba-pl011.c
drivers/serial/icom.c
drivers/serial/jsm/jsm.h
drivers/serial/jsm/jsm_driver.c
drivers/serial/mpc52xx_uart.c
drivers/serial/nwpserial.c
drivers/serial/s3c6400.c
drivers/serial/samsung.c
drivers/serial/samsung.h
drivers/spi/pxa2xx_spi.c
drivers/staging/comedi/TODO
drivers/staging/rt2870/rt2870.h
drivers/staging/rtl8187se/r8180.h
drivers/staging/rtl8187se/r8180_core.c
drivers/staging/winbond/wbusb.c
drivers/thermal/thermal_sys.c
drivers/usb/Makefile
drivers/usb/atm/cxacru.c
drivers/usb/class/cdc-acm.c
drivers/usb/gadget/atmel_usba_udc.c
drivers/usb/gadget/usbstring.c
drivers/usb/host/isp1760-hcd.c
drivers/usb/serial/ftdi_sio.c
drivers/usb/serial/ftdi_sio.h
drivers/usb/serial/usb-serial.c
drivers/usb/storage/unusual_devs.h
drivers/video/Kconfig
drivers/video/Makefile
drivers/video/amba-clcd.c
drivers/video/atmel_lcdfb.c
drivers/video/cfbfillrect.c
drivers/video/fb_draw.h
drivers/video/gbefb.c
drivers/video/mx3fb.c
drivers/video/omap/dispc.c
drivers/video/omap/rfbi.c
drivers/video/s3c-fb.c
drivers/video/sh_mobile_lcdcfb.c
drivers/video/sysfillrect.c
drivers/video/via/viafbdev.c
drivers/xen/balloon.c
drivers/xen/events.c
firmware/cis/.gitignore [new file with mode: 0644]
fs/9p/vfs_super.c
fs/affs/super.c
fs/afs/super.c
fs/binfmt_flat.c
fs/btrfs/ctree.c
fs/btrfs/disk-io.c
fs/btrfs/extent-tree.c
fs/btrfs/inode.c
fs/btrfs/ioctl.c
fs/btrfs/super.c
fs/cachefiles/internal.h
fs/cifs/CHANGES
fs/cifs/README
fs/cifs/cifs_dfs_ref.c
fs/cifs/cifs_unicode.c
fs/cifs/cifs_unicode.h
fs/cifs/cifsfs.c
fs/cifs/cifsfs.h
fs/cifs/cifsglob.h
fs/cifs/cifsproto.h
fs/cifs/cifssmb.c
fs/cifs/connect.c
fs/cifs/dir.c
fs/cifs/file.c
fs/cifs/inode.c
fs/cifs/link.c
fs/cifs/misc.c
fs/cifs/netmisc.c
fs/cifs/nterr.h
fs/cifs/ntlmssp.h
fs/cifs/readdir.c
fs/cifs/sess.c
fs/cifs/smberr.h
fs/dcache.c
fs/devpts/inode.c
fs/ecryptfs/main.c
fs/eventpoll.c
fs/exec.c
fs/ext4/extents.c
fs/ext4/inode.c
fs/fcntl.c
fs/fscache/internal.h
fs/fuse/inode.c
fs/gfs2/glock.c
fs/gfs2/ops_fstype.c
fs/hpfs/super.c
fs/hugetlbfs/inode.c
fs/inode.c
fs/ioctl.c
fs/jffs2/erase.c
fs/libfs.c
fs/lockd/svc.c
fs/namei.c
fs/namespace.c
fs/nfs/dir.c
fs/nfs/file.c
fs/nfs/nfs4proc.c
fs/nfs/nfsroot.c
fs/nfs/super.c
fs/nfsd/nfs4recover.c
fs/nfsd/nfs4state.c
fs/nfsd/nfs4xdr.c
fs/nfsd/vfs.c
fs/nilfs2/cpfile.c
fs/nilfs2/ioctl.c
fs/nilfs2/mdt.c
fs/nilfs2/nilfs.h
fs/nilfs2/page.c
fs/nilfs2/recovery.c
fs/nilfs2/segment.c
fs/nilfs2/segment.h
fs/notify/inotify/inotify_user.c
fs/ocfs2/symlink.c
fs/open.c
fs/proc/array.c
fs/proc/base.c
fs/proc/root.c
fs/reiserfs/dir.c
fs/reiserfs/namei.c
fs/reiserfs/super.c
fs/reiserfs/xattr.c
fs/reiserfs/xattr_security.c
fs/romfs/super.c
fs/squashfs/Makefile
fs/squashfs/cache.c
fs/squashfs/super.c
fs/super.c
fs/sysfs/file.c
fs/ubifs/super.c
fs/ufs/dir.c
fs/ufs/file.c
fs/ufs/ufs.h
include/asm-generic/bug.h
include/asm-generic/local.h
include/drm/drmP.h
include/drm/i915_drm.h
include/linux/Kbuild
include/linux/acpi.h
include/linux/amba/bus.h
include/linux/ata.h
include/linux/auto_fs.h
include/linux/cred.h
include/linux/device.h
include/linux/dmaengine.h
include/linux/dmar.h
include/linux/fs.h
include/linux/i7300_idle.h
include/linux/ide.h
include/linux/input.h
include/linux/interrupt.h
include/linux/irq.h
include/linux/mmzone.h
include/linux/namei.h
include/linux/net_dropmon.h
include/linux/netfilter/nf_conntrack_tcp.h
include/linux/netfilter/x_tables.h
include/linux/netfilter/xt_LED.h
include/linux/netfilter/xt_cluster.h
include/linux/nls.h
include/linux/pci_ids.h
include/linux/platform_device.h
include/linux/reiserfs_fs_sb.h
include/linux/reiserfs_xattr.h
include/linux/romfs_fs.h
include/linux/swap.h
include/linux/syscalls.h
include/linux/usb/cdc.h
include/linux/virtio_net.h
include/linux/writeback.h
include/net/9p/client.h
include/net/bluetooth/hci_core.h
include/net/tcp.h
include/scsi/scsi_transport_fc.h
include/sound/version.h
init/initramfs.c
init/main.c
kernel/async.c
kernel/auditfilter.c
kernel/cgroup.c
kernel/futex.c
kernel/irq/Makefile
kernel/irq/chip.c
kernel/irq/handle.c
kernel/irq/internals.h
kernel/irq/manage.c
kernel/irq/migration.c
kernel/irq/numa_migrate.c
kernel/kexec.c
kernel/kgdb.c
kernel/kmod.c
kernel/kprobes.c
kernel/lockdep_internals.h
kernel/panic.c
kernel/posix-cpu-timers.c
kernel/power/disk.c
kernel/power/main.c
kernel/sched.c
kernel/sched_clock.c
kernel/softirq.c
kernel/sysctl.c
kernel/time/tick-common.c
kernel/trace/trace.c
lib/Kconfig.debug
lib/dma-debug.c
mm/Kconfig
mm/filemap.c
mm/hugetlb.c
mm/memcontrol.c
mm/mmzone.c
mm/nommu.c
mm/oom_kill.c
mm/page-writeback.c
mm/page_alloc.c
mm/pdflush.c
mm/rmap.c
mm/slob.c
mm/slub.c
mm/swap_state.c
mm/truncate.c
mm/vmalloc.c
mm/vmscan.c
mm/vmstat.c
net/9p/client.c
net/9p/trans_fd.c
net/9p/trans_rdma.c
net/9p/trans_virtio.c
net/Kconfig
net/atm/br2684.c
net/bluetooth/hci_conn.c
net/bluetooth/hci_event.c
net/bluetooth/hci_sysfs.c
net/bridge/br_input.c
net/bridge/br_stp.c
net/core/dev.c
net/core/gen_estimator.c
net/core/netpoll.c
net/core/pktgen.c
net/core/skbuff.c
net/ipv4/Kconfig
net/ipv4/fib_trie.c
net/ipv4/ipconfig.c
net/ipv4/route.c
net/ipv4/tcp.c
net/ipv4/tcp_input.c
net/ipv4/tcp_vegas.c
net/ipv6/netfilter/ip6t_ipv6header.c
net/ipv6/route.c
net/mac80211/main.c
net/mac80211/rc80211_minstrel.c
net/mac80211/rc80211_pid_algo.c
net/mac80211/tx.c
net/netfilter/Kconfig
net/netfilter/ipvs/ip_vs_conn.c
net/netfilter/ipvs/ip_vs_core.c
net/netfilter/nf_conntrack_netlink.c
net/netfilter/nf_conntrack_proto_dccp.c
net/netfilter/nf_conntrack_proto_tcp.c
net/netfilter/nfnetlink_log.c
net/netfilter/xt_cluster.c
net/netfilter/xt_hashlimit.c
net/rxrpc/ar-connection.c
net/sched/cls_api.c
net/sched/cls_cgroup.c
net/sched/sch_fifo.c
net/sched/sch_teql.c
net/sunrpc/svcsock.c
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
net/sunrpc/xprtrdma/svc_rdma_sendto.c
net/sunrpc/xprtrdma/svc_rdma_transport.c
net/sunrpc/xprtrdma/verbs.c
net/wimax/op-msg.c
net/wimax/stack.c
net/wireless/reg.c
net/wireless/scan.c
net/wireless/wext.c
scripts/mod/modpost.c
scripts/setlocalversion
security/selinux/hooks.c
security/tomoyo/common.c
security/tomoyo/realpath.c
security/tomoyo/tomoyo.c
sound/arm/aaci.c
sound/arm/pxa2xx-ac97-lib.c
sound/core/pcm_lib.c
sound/core/pcm_native.c
sound/drivers/pcsp/pcsp_mixer.c
sound/drivers/serial-u16550.c
sound/isa/msnd/msnd.c
sound/pci/ac97/ac97_patch.c
sound/pci/bt87x.c
sound/pci/ca0106/ca0106_mixer.c
sound/pci/echoaudio/indigodjx.c
sound/pci/echoaudio/indigoiox.c
sound/pci/hda/hda_intel.c
sound/pci/hda/patch_conexant.c
sound/pci/hda/patch_realtek.c
sound/pci/hda/patch_sigmatel.c
sound/pci/korg1212/korg1212.c
sound/pci/riptide/riptide.c
sound/pci/via82xx.c
sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
sound/soc/au1x/dbdma2.c
sound/soc/codecs/twl4030.c
sound/soc/codecs/wm8350.c
sound/soc/codecs/wm8990.c
sound/soc/davinci/Kconfig
sound/soc/davinci/davinci-evm.c
sound/soc/davinci/davinci-i2s.c
sound/soc/davinci/davinci-pcm.c
sound/soc/fsl/mpc5200_psc_i2s.c
sound/soc/sh/dma-sh7760.c
sound/soc/soc-core.c
sound/sparc/dbri.c
sound/usb/usbaudio.c
sound/usb/usbaudio.h
sound/usb/usbmidi.c
sound/usb/usbquirks.h
sound/usb/usx2y/usbusx2yaudio.c

diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
new file mode 100644 (file)
index 0000000..6dcf75e
--- /dev/null
@@ -0,0 +1,479 @@
+What:          /sys/kernel/slab
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The /sys/kernel/slab directory contains a snapshot of the
+               internal state of the SLUB allocator for each cache.  Certain
+               files may be modified to change the behavior of the cache (and
+               any cache it aliases, if any).
+Users:         kernel memory tuning tools
+
+What:          /sys/kernel/slab/cache/aliases
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The aliases file is read-only and specifies how many caches
+               have merged into this cache.
+
+What:          /sys/kernel/slab/cache/align
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The align file is read-only and specifies the cache's object
+               alignment in bytes.
+
+What:          /sys/kernel/slab/cache/alloc_calls
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The alloc_calls file is read-only and lists the kernel code
+               locations from which allocations for this cache were performed.
+               The alloc_calls file only contains information if debugging is
+               enabled for that cache (see Documentation/vm/slub.txt).
+
+What:          /sys/kernel/slab/cache/alloc_fastpath
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The alloc_fastpath file is read-only and specifies how many
+               objects have been allocated using the fast path.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/alloc_from_partial
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The alloc_from_partial file is read-only and specifies how
+               many times a cpu slab has been full and it has been refilled
+               by using a slab from the list of partially used slabs.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/alloc_refill
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The alloc_refill file is read-only and specifies how many
+               times the per-cpu freelist was empty but there were objects
+               available as the result of remote cpu frees.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/alloc_slab
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The alloc_slab file is read-only and specifies how many times
+               a new slab had to be allocated from the page allocator.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/alloc_slowpath
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The alloc_slowpath file is read-only and specifies how many
+               objects have been allocated using the slow path because of a
+               refill or allocation from a partial or new slab.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/cache_dma
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The cache_dma file is read-only and specifies whether objects
+               are from ZONE_DMA.
+               Available when CONFIG_ZONE_DMA is enabled.
+
+What:          /sys/kernel/slab/cache/cpu_slabs
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The cpu_slabs file is read-only and displays how many cpu slabs
+               are active and their NUMA locality.
+
+What:          /sys/kernel/slab/cache/cpuslab_flush
+Date:          April 2009
+KernelVersion: 2.6.31
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file cpuslab_flush is read-only and specifies how many
+               times a cache's cpu slabs have been flushed as the result of
+               destroying or shrinking a cache, a cpu going offline, or as
+               the result of forcing an allocation from a certain node.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/ctor
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The ctor file is read-only and specifies the cache's object
+               constructor function, which is invoked for each object when a
+               new slab is allocated.
+
+What:          /sys/kernel/slab/cache/deactivate_empty
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file deactivate_empty is read-only and specifies how many
+               times an empty cpu slab was deactivated.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/deactivate_full
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file deactivate_full is read-only and specifies how many
+               times a full cpu slab was deactivated.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/deactivate_remote_frees
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file deactivate_remote_frees is read-only and specifies how
+               many times a cpu slab has been deactivated and contained free
+               objects that were freed remotely.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/deactivate_to_head
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file deactivate_to_head is read-only and specifies how
+               many times a partial cpu slab was deactivated and added to the
+               head of its node's partial list.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/deactivate_to_tail
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file deactivate_to_tail is read-only and specifies how
+               many times a partial cpu slab was deactivated and added to the
+               tail of its node's partial list.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/destroy_by_rcu
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The destroy_by_rcu file is read-only and specifies whether
+               slabs (not objects) are freed by rcu.
+
+What:          /sys/kernel/slab/cache/free_add_partial
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file free_add_partial is read-only and specifies how many
+               times an object has been freed in a full slab so that it had to
+               added to its node's partial list.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/free_calls
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The free_calls file is read-only and lists the locations of
+               object frees if slab debugging is enabled (see
+               Documentation/vm/slub.txt).
+
+What:          /sys/kernel/slab/cache/free_fastpath
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The free_fastpath file is read-only and specifies how many
+               objects have been freed using the fast path because it was an
+               object from the cpu slab.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/free_frozen
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The free_frozen file is read-only and specifies how many
+               objects have been freed to a frozen slab (i.e. a remote cpu
+               slab).
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/free_remove_partial
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file free_remove_partial is read-only and specifies how
+               many times an object has been freed to a now-empty slab so
+               that it had to be removed from its node's partial list.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/free_slab
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The free_slab file is read-only and specifies how many times an
+               empty slab has been freed back to the page allocator.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/free_slowpath
+Date:          February 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The free_slowpath file is read-only and specifies how many
+               objects have been freed using the slow path (i.e. to a full or
+               partial slab).
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/hwcache_align
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The hwcache_align file is read-only and specifies whether
+               objects are aligned on cachelines.
+
+What:          /sys/kernel/slab/cache/min_partial
+Date:          February 2009
+KernelVersion: 2.6.30
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               David Rientjes <rientjes@google.com>
+Description:
+               The min_partial file specifies how many empty slabs shall
+               remain on a node's partial list to avoid the overhead of
+               allocating new slabs.  Such slabs may be reclaimed by utilizing
+               the shrink file.
+
+What:          /sys/kernel/slab/cache/object_size
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The object_size file is read-only and specifies the cache's
+               object size.
+
+What:          /sys/kernel/slab/cache/objects
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The objects file is read-only and displays how many objects are
+               active and from which nodes they are from.
+
+What:          /sys/kernel/slab/cache/objects_partial
+Date:          April 2008
+KernelVersion: 2.6.26
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The objects_partial file is read-only and displays how many
+               objects are on partial slabs and from which nodes they are
+               from.
+
+What:          /sys/kernel/slab/cache/objs_per_slab
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file objs_per_slab is read-only and specifies how many
+               objects may be allocated from a single slab of the order
+               specified in /sys/kernel/slab/cache/order.
+
+What:          /sys/kernel/slab/cache/order
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The order file specifies the page order at which new slabs are
+               allocated.  It is writable and can be changed to increase the
+               number of objects per slab.  If a slab cannot be allocated
+               because of fragmentation, SLUB will retry with the minimum order
+               possible depending on its characteristics.
+
+What:          /sys/kernel/slab/cache/order_fallback
+Date:          April 2008
+KernelVersion: 2.6.26
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file order_fallback is read-only and specifies how many
+               times an allocation of a new slab has not been possible at the
+               cache's order and instead fallen back to its minimum possible
+               order.
+               Available when CONFIG_SLUB_STATS is enabled.
+
+What:          /sys/kernel/slab/cache/partial
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The partial file is read-only and displays how long many
+               partial slabs there are and how long each node's list is.
+
+What:          /sys/kernel/slab/cache/poison
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The poison file specifies whether objects should be poisoned
+               when a new slab is allocated.
+
+What:          /sys/kernel/slab/cache/reclaim_account
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The reclaim_account file specifies whether the cache's objects
+               are reclaimable (and grouped by their mobility).
+
+What:          /sys/kernel/slab/cache/red_zone
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The red_zone file specifies whether the cache's objects are red
+               zoned.
+
+What:          /sys/kernel/slab/cache/remote_node_defrag_ratio
+Date:          January 2008
+KernelVersion: 2.6.25
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The file remote_node_defrag_ratio specifies the percentage of
+               times SLUB will attempt to refill the cpu slab with a partial
+               slab from a remote node as opposed to allocating a new slab on
+               the local node.  This reduces the amount of wasted memory over
+               the entire system but can be expensive.
+               Available when CONFIG_NUMA is enabled.
+
+What:          /sys/kernel/slab/cache/sanity_checks
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The sanity_checks file specifies whether expensive checks
+               should be performed on free and, at minimum, enables double free
+               checks.  Caches that enable sanity_checks cannot be merged with
+               caches that do not.
+
+What:          /sys/kernel/slab/cache/shrink
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The shrink file is written when memory should be reclaimed from
+               a cache.  Empty partial slabs are freed and the partial list is
+               sorted so the slabs with the fewest available objects are used
+               first.
+
+What:          /sys/kernel/slab/cache/slab_size
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The slab_size file is read-only and specifies the object size
+               with metadata (debugging information and alignment) in bytes.
+
+What:          /sys/kernel/slab/cache/slabs
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The slabs file is read-only and displays how long many slabs
+               there are (both cpu and partial) and from which nodes they are
+               from.
+
+What:          /sys/kernel/slab/cache/store_user
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The store_user file specifies whether the location of
+               allocation or free should be tracked for a cache.
+
+What:          /sys/kernel/slab/cache/total_objects
+Date:          April 2008
+KernelVersion: 2.6.26
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The total_objects file is read-only and displays how many total
+               objects a cache has and from which nodes they are from.
+
+What:          /sys/kernel/slab/cache/trace
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               The trace file specifies whether object allocations and frees
+               should be traced.
+
+What:          /sys/kernel/slab/cache/validate
+Date:          May 2007
+KernelVersion: 2.6.22
+Contact:       Pekka Enberg <penberg@cs.helsinki.fi>,
+               Christoph Lameter <cl@linux-foundation.org>
+Description:
+               Writing to the validate file causes SLUB to traverse all of its
+               cache's objects and check the validity of metadata.
index 372dec20c8dab6db05fbbcd9e3cdef93f1e783a5..5cff41a5fa7c3746b97db6db8955cd06c895bc01 100644 (file)
     seriously wrong while debugging, it will most often be the case
     that you want to enable gdb to be verbose about its target
     communications.  You do this prior to issuing the <constant>target
-    remote</constant> command by typing in: <constant>set remote debug 1</constant>
+    remote</constant> command by typing in: <constant>set debug remote 1</constant>
     </para>
   </chapter>
   <chapter id="KGDBTestSuite">
index 222437efd75a8231751c83a9d68195364b22ad62..3015da0c6b2a253c4a1b65559a8a8ec82b24e3e9 100644 (file)
@@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
 Author:
    Christoph Rohland <cr@sap.com>, 1.12.01
 Updated:
-   Hugh Dickins <hugh@veritas.com>, 4 June 2007
+   Hugh Dickins, 4 June 2007
index 2f10ce6a879f7276f635cd1ac51c03d8c004d8c1..004ee161721e9b3bd1aa213c174a594174b187c8 100644 (file)
@@ -150,6 +150,11 @@ fan[1-*]_min       Fan minimum value
                Unit: revolution/min (RPM)
                RW
 
+fan[1-*]_max   Fan maximum value
+               Unit: revolution/min (RPM)
+               Only rarely supported by the hardware.
+               RW
+
 fan[1-*]_input Fan input value.
                Unit: revolution/min (RPM)
                RO
@@ -390,6 +395,7 @@ OR
 in[0-*]_min_alarm
 in[0-*]_max_alarm
 fan[1-*]_min_alarm
+fan[1-*]_max_alarm
 temp[1-*]_min_alarm
 temp[1-*]_max_alarm
 temp[1-*]_crit_alarm
index 9f09557aea39c5e80b6b9810ab170fddd32b1c91..a12ea3b586e6e15ecb66322c78bf5d6cb3e03f79 100644 (file)
@@ -18,8 +18,12 @@ Usage
 Anonymous finger details are sent sequentially as separate packets of ABS
 events. Only the ABS_MT events are recognized as part of a finger
 packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
 
 A set of ABS_MT events with the desired properties is defined. The events
 are divided into categories, to allow for partial implementation.  The
@@ -27,11 +31,26 @@ minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
 ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked.  If the
 device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
 of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION.  The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else.  Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   ABS_MT_TOUCH_MAJOR
+   ABS_MT_POSITION_X
+   ABS_MT_POSITION_Y
+   SYN_MT_REPORT
+   SYN_REPORT
 
 
 Event Semantics
@@ -44,24 +63,24 @@ ABS_MT_TOUCH_MAJOR
 
 The length of the major axis of the contact. The length should be given in
 surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
 
 ABS_MT_TOUCH_MINOR
 
 The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
 
 ABS_MT_WIDTH_MAJOR
 
 The length, in surface units, of the major axis of the approaching
 tool. This should be understood as the size of the tool itself. The
 orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
 
 ABS_MT_WIDTH_MINOR
 
 The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
 
 The above four values can be used to derive additional information about
 the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
@@ -70,14 +89,17 @@ different characteristic widths [1].
 
 ABS_MT_ORIENTATION
 
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned.  Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
 
 ABS_MT_POSITION_X
 
@@ -98,8 +120,35 @@ ABS_MT_BLOB_ID
 
 The BLOB_ID groups several packets together into one arbitrarily shaped
 contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+   ABS_MT_TOUCH_MAJOR := max(X, Y)
+   ABS_MT_TOUCH_MINOR := min(X, Y)
+   ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
 
 
 Finger Tracking
@@ -109,14 +158,18 @@ The kernel driver should generate an arbitrary enumeration of the set of
 anonymous contacts currently on the surface. The order in which the packets
 appear in the event stream is not important.
 
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
 initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
 unique until the contact vanishes (when the finger leaves the surface). The
 problem of assigning a set of anonymous fingers to a set of identified
 fingers is a euclidian bipartite matching problem at each event update, and
 relies on a sufficiently rapid update rate.
 
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
 Notes
 -----
 
@@ -136,5 +189,7 @@ could be used to derive tilt.
 time of writing (April 2009), the MT protocol is not yet merged, and the
 prototype implements finger matching, basic mouse support and two-finger
 scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
 implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.
index 90b3924071b6c35f69ece1feba26ae9f92c5ab37..11648c13a7290e48181e6f1b97c33096a621f5f6 100644 (file)
@@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
 
        usbcore.blinkenlights=1
 
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+       log_buf_len=1M print-fatal-signals=1
+can also be entered as
+       log-buf-len=1M print_fatal_signals=1
+
+
 This document may not be entirely up to date and comprehensive. The command
 "modinfo -p ${modulename}" shows a current list of all parameters of a loadable
 module. Loadable modules, after being loaded into the running kernel, also
@@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        not play well with APC CPU idle - disable it if you have
                        APC and your system crashes randomly.
 
-       apic=           [APIC,i386] Advanced Programmable Interrupt Controller
+       apic=           [APIC,X86-32] Advanced Programmable Interrupt Controller
                        Change the output verbosity whilst booting
                        Format: { quiet (default) | verbose | debug }
                        Change the amount of debugging information output
@@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
                        to discrete, to make X server driver able to add WB
                        entry later. This parameter enables that.
 
-       enable_timer_pin_1 [i386,x86-64]
+       enable_timer_pin_1 [X86]
                        Enable PIN 1 of APIC timer
                        Can be useful to work around chipset bugs
                        (in particular on some ATI chipsets).
@@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file
 
        hashdist=       [KNL,NUMA] Large hashes allocated during boot
                        are distributed across NUMA nodes.  Defaults on
-                       for IA-64, off otherwise.
+                       for 64bit NUMA, off otherwise.
                        Format: 0 | 1 (for off | on)
 
        hcl=            [IA-64] SGI's Hardware Graph compatibility layer
@@ -1529,6 +1535,10 @@ and is between 256 and 4096 characters. It is defined in the file
                        register save and restore. The kernel will only save
                        legacy floating-point registers on task switch.
 
+       noxsave         [BUGS=X86] Disables x86 extended register state save
+                       and restore using xsave. The kernel will fallback to
+                       enabling legacy floating-point and sse state.
+
        nohlt           [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
                        wfi(ARM) instruction doesn't work correctly and not to
                        use it. This is also useful when using JTAG debugger.
@@ -1565,6 +1575,9 @@ and is between 256 and 4096 characters. It is defined in the file
        noinitrd        [RAM] Tells the kernel not to load any configured
                        initial RAM disk.
 
+       nointremap      [X86-64, Intel-IOMMU] Do not enable interrupt
+                       remapping.
+
        nointroute      [IA-64]
 
        nojitter        [IA64] Disables jitter checking for ITC timers.
index 938ea22f2cc096f6838a678217e463bf9ec0cd4d..e20d913d5914a29261d12f5fa4585164ed170c82 100644 (file)
@@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example:
 The bit position indicates STATE, STATE-read, for each of the states listed
 above, and the character displayed in each indicates:
 
-   '.'  acquired while irqs disabled
-   '+'  acquired in irq context
-   '-'  acquired with irqs enabled
+   '.'  acquired while irqs disabled and not in irq context
+   '-'  acquired in irq context
+   '+'  acquired with irqs enabled
    '?'  acquired in irq context with irqs enabled.
 
 Unused mutexes cannot be part of the cause of an error.
index ec5de02f543f68c84b2f88712a478c827d033ffa..b121c5db707fcf8708533acd7b73a51cbd286296 100644 (file)
@@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
 sctp_wmem  - vector of 3 INTEGERs: min, default, max
        See tcp_wmem for a description.
 
-UNDOCUMENTED:
 
 /proc/sys/net/core/*
-       dev_weight FIXME
+dev_weight - INTEGER
+       The maximum number of packets that kernel can handle on a NAPI
+       interrupt, it's a Per-CPU variable.
+
+       Default: 64
 
 /proc/sys/net/unix/*
-       max_dgram_qlen FIXME
+max_dgram_qlen - INTEGER
+       The maximum length of dgram socket receive queue
+
+       Default: 10
+
+
+UNDOCUMENTED:
 
 /proc/sys/net/irda/*
        fast_poll_increase FIXME
index 8eec05bc079ebfcc0af9e030ceee652e0a9bf024..322869fc8a9e867e3b21073d64378c82c6e8aad7 100644 (file)
@@ -334,6 +334,7 @@ STAC9227/9228/9229/927x
   ref-no-jd    Reference board without HP/Mic jack detection
   3stack       D965 3stack
   5stack       D965 5stack + SPDIF
+  5stack-no-fp D965 5stack without front panel
   dell-3stack  Dell Dimension E520
   dell-bios    Fixes with Dell BIOS setup
   auto         BIOS setup (default)
index bba2dbb79d81c10d71bbc5b0879f6d3745d1543d..cfac20cf9e33fa150a6cf69f4e6d624e8116caa9 100644 (file)
@@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
        When this value is greater than 1, the driver will show the
        stack trace additionally.  This may help the debugging.
 
+       Since 2.6.30, this option also enables the hwptr check using
+       jiffies.  This detects spontaneous invalid pointer callback
+       values, but can be lead to too much corrections for a (mostly
+       buggy) hardware that doesn't give smooth pointer updates.
+
 card*/pcm*/sub*/info
        The general information of this PCM sub-stream.
 
index b716d33912d8a02b219b6c39e0270c01b7b733a4..c302ddf629a0bef9d04014b7ee014acd2c092cb0 100644 (file)
@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
 - nr_hugepages
 - nr_overcommit_hugepages
 - nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
 - nr_trim_pages         (only if CONFIG_MMU=n)
 - numa_zonelist_order
 - oom_dump_tasks
@@ -469,32 +467,6 @@ The default value is 0.
 
 ==============================================================
 
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2.  The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created.  The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8.  The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
 overcommit_memory:
 
 This value contains a flag that enables memory overcommitment.
index 6049a2a84dda2111b9c35c628665566e0153b254..5d8bc2cd250c009ca69054d8a51139ca877dfaf3 100644 (file)
@@ -113,7 +113,7 @@ versions of the sysfs interface.
   "devices" directory at /sys/subsystem/<name>/devices.
 
   If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
-  ignored. If it does not exist, you have always to scan all three
+  ignored. If it does not exist, you always have to scan all three
   places, as the kernel is free to move a subsystem from one place to
   the other, as long as the devices are still reachable by the same
   subsystem name.
index 9de961bd1214a14bafc1a05ac488bcca9d346dc8..cf4abddfc8a40dcc161e851c26294480fff3076f 100644 (file)
@@ -434,7 +434,7 @@ F:  arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
 P:     Thomas Dahlmann
-M:     thomas.dahlmann@amd.com
+M:     dahlmann.thomas@arcor.de
 L:     linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:     Supported
 F:     drivers/usb/gadget/amd5536udc.*
@@ -624,6 +624,7 @@ M:  paulius.zaleckas@teltonika.lt
 L:     linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:     git git://gitorious.org/linux-gemini/mainline.git
 S:     Maintained
+F:     arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
 P:     Russell King
@@ -650,6 +651,7 @@ P:  Paulius Zaleckas
 M:     paulius.zaleckas@teltonika.lt
 L:     linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:     Maintained
+F:     arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
 P:     Russell King
@@ -1132,17 +1134,17 @@ F:      fs/bfs/
 F:     include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:     Bryan Wu
-M:     cooloney@kernel.org
+P:     Mike Frysinger
+M:     vapier@gentoo.org
 L:     uclinux-dist-devel@blackfin.uclinux.org
 W:     http://blackfin.uclinux.org
 S:     Supported
 F:     arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:     Bryan Wu
-M:     cooloney@kernel.org
-L:     uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P:     Michael Hennerich
+M:     michael.hennerich@analog.com
+L:     uclinux-dist-devel@blackfin.uclinux.org
 W:     http://blackfin.uclinux.org
 S:     Supported
 F:     drivers/net/bfin_mac.*
@@ -1150,7 +1152,7 @@ F:        drivers/net/bfin_mac.*
 BLACKFIN RTC DRIVER
 P:     Mike Frysinger
 M:     vapier.adi@gmail.com
-L:     uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:     uclinux-dist-devel@blackfin.uclinux.org
 W:     http://blackfin.uclinux.org
 S:     Supported
 F:     drivers/rtc/rtc-bfin.c
@@ -1158,7 +1160,7 @@ F:        drivers/rtc/rtc-bfin.c
 BLACKFIN SERIAL DRIVER
 P:     Sonic Zhang
 M:     sonic.zhang@analog.com
-L:     uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:     uclinux-dist-devel@blackfin.uclinux.org
 W:     http://blackfin.uclinux.org
 S:     Supported
 F:     drivers/serial/bfin_5xx.c
@@ -1166,7 +1168,7 @@ F:        drivers/serial/bfin_5xx.c
 BLACKFIN WATCHDOG DRIVER
 P:     Mike Frysinger
 M:     vapier.adi@gmail.com
-L:     uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:     uclinux-dist-devel@blackfin.uclinux.org
 W:     http://blackfin.uclinux.org
 S:     Supported
 F:     drivers/watchdog/bfin_wdt.c
@@ -1174,7 +1176,7 @@ F:        drivers/watchdog/bfin_wdt.c
 BLACKFIN I2C TWI DRIVER
 P:     Sonic Zhang
 M:     sonic.zhang@analog.com
-L:     uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L:     uclinux-dist-devel@blackfin.uclinux.org
 W:     http://blackfin.uclinux.org/
 S:     Supported
 F:     drivers/i2c/busses/i2c-bfin-twi.c
@@ -1431,6 +1433,14 @@ P:       Russell King
 M:     linux@arm.linux.org.uk
 F:     include/linux/clk.h
 
+CISCO FCOE HBA DRIVER
+P:     Abhijeet Joglekar
+M:     abjoglek@cisco.com
+P:     Joe Eykholt
+M:     jeykholt@cisco.com
+L:     linux-scsi@vger.kernel.org
+S:     Supported
+
 CODA FILE SYSTEM
 P:     Jan Harkes
 M:     jaharkes@cs.cmu.edu
@@ -1532,6 +1542,13 @@ W:       http://www.fi.muni.cz/~kas/cosa/
 S:     Maintained
 F:     drivers/net/wan/cosa*
 
+CPMAC ETHERNET DRIVER
+P:     Florian Fainelli
+M:     florian@openwrt.org
+L:     netdev@vger.kernel.org
+S:     Maintained
+F:     drivers/net/cpmac.c
+
 CPU FREQUENCY DRIVERS
 P:     Dave Jones
 M:     davej@redhat.com
@@ -1963,8 +1980,8 @@ F:        include/linux/edac.h
 
 EDAC-E752X
 P:     Mark Gross
-P:     Doug Thompson
 M:     mark.gross@intel.com
+P:     Doug Thompson
 M:     dougthompson@xmission.com
 L:     bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:     bluesmoke.sourceforge.net
@@ -2241,7 +2258,7 @@ P:        Li Yang
 M:     leoli@freescale.com
 P:     Zhang Wei
 M:     zw@zh-kernel.org
-L:     linuxppc-embedded@ozlabs.org
+L:     linuxppc-dev@ozlabs.org
 L:     linux-kernel@vger.kernel.org
 S:     Maintained
 F:     drivers/dma/fsldma.*
@@ -3434,11 +3451,10 @@ L:      linuxppc-dev@ozlabs.org
 S:     Maintained
 
 LINUX FOR POWERPC EMBEDDED MPC5XXX
-P:     Sylvain Munaut
-M:     tnt@246tNt.com
 P:     Grant Likely
 M:     grant.likely@secretlab.ca
 L:     linuxppc-dev@ozlabs.org
+T:     git git://git.secretlab.ca/git/linux-2.6.git
 S:     Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC4XX
@@ -3456,6 +3472,7 @@ P:        Grant Likely
 M:     grant.likely@secretlab.ca
 W:     http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
 L:     linuxppc-dev@ozlabs.org
+T:     git git://git.secretlab.ca/git/linux-2.6.git
 S:     Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
@@ -5579,6 +5596,14 @@ M:       ian@mnementh.co.uk
 S:     Maintained
 F:     drivers/mmc/host/tmio_mmc.*
 
+TMPFS (SHMEM FILESYSTEM)
+P:     Hugh Dickins
+M:     hugh.dickins@tiscali.co.uk
+L:     linux-mm@kvack.org
+S:     Maintained
+F:     include/linux/shmem_fs.h
+F:     mm/shmem.c
+
 TPM DEVICE DRIVER
 P:     Debora Velarde
 M:     debora@linux.vnet.ibm.com
index b18afad2e1008daaf362ab71ebd4bcfd440cdceb..739fd34a72a2422f14937ccd084f77d52edc0fc1 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 30
-EXTRAVERSION = -rc4
-NAME = Vindictive Armadillo
+EXTRAVERSION = -rc7
+NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
index e9e0bb5a23bf5687096cbd5460b8d138ed5f5534..06c5c7a4afd3f6617440cdbcf669d70d591a0d44 100644 (file)
@@ -1,7 +1,9 @@
 #ifndef __ALPHA_PERCPU_H
 #define __ALPHA_PERCPU_H
+
 #include <linux/compiler.h>
 #include <linux/threads.h>
+#include <linux/percpu-defs.h>
 
 /*
  * Determine the real variable name from the name visible in the
@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
 
 #endif /* SMP */
 
-#include <asm-generic/percpu.h>
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
 
 #endif /* __ALPHA_PERCPU_H */
index 9c9d1fd4155fc5e736c98d89e68d034cd8f2b9ef..5bd5259324b7c8827adb237facd7bf120edd4ca2 100644 (file)
@@ -176,22 +176,26 @@ cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
        }
 }
 
-static void
+static int
 dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
        spin_lock(&dp264_irq_lock);
        cpu_set_irq_affinity(irq, *affinity);
        tsunami_update_irq_hw(cached_irq_mask);
        spin_unlock(&dp264_irq_lock);
+
+       return 0;
 }
 
-static void
+static int
 clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
        spin_lock(&dp264_irq_lock);
        cpu_set_irq_affinity(irq - 16, *affinity);
        tsunami_update_irq_hw(cached_irq_mask);
        spin_unlock(&dp264_irq_lock);
+
+       return 0;
 }
 
 static struct hw_interrupt_type dp264_irq_type = {
index 27f840a4ad3d7ec0949ac92a55ef5c7c1a3b9280..8dd239ebdb9e2cc3489c3d128402a9da37033a29 100644 (file)
@@ -157,13 +157,15 @@ titan_cpu_set_irq_affinity(unsigned int irq, cpumask_t affinity)
 
 }
 
-static void
+static int
 titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
 { 
        spin_lock(&titan_irq_lock);
        titan_cpu_set_irq_affinity(irq - 16, *affinity);
        titan_update_irq_hw(titan_cached_irq_mask);
        spin_unlock(&titan_irq_lock);
+
+       return 0;
 }
 
 static void
index 9faccc411c2abafcc1c3cac85fd9fbb897aae658..9d02cdb15b23dc6d4524cf61db4153c810639580 100644 (file)
@@ -273,6 +273,7 @@ config ARCH_EP93XX
        select HAVE_CLK
        select COMMON_CLKDEV
        select ARCH_REQUIRE_GPIOLIB
+       select ARCH_HAS_HOLES_MEMORYMODEL
        help
          This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -454,6 +455,7 @@ config ARCH_MXC
        select ARCH_MTD_XIP
        select GENERIC_GPIO
        select ARCH_REQUIRE_GPIOLIB
+       select HAVE_CLK
        help
          Support for Freescale MXC/iMX-based family of processors
 
@@ -975,10 +977,9 @@ config OABI_COMPAT
          UNPREDICTABLE (in fact it can be predicted that it won't work
          at all). If in doubt say Y.
 
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
        bool
-       default y
-       depends on FLATMEM
+       default n
 
 # Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
index c6884ba1d5ed0b91122f45072f97c99cda52a23d..664c7b8b1ba87d7d5268c661808636a27b4f610c 100644 (file)
@@ -109,7 +109,7 @@ static void gic_unmask_irq(unsigned int irq)
 }
 
 #ifdef CONFIG_SMP
-static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
+static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
 {
        void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
        unsigned int shift = (irq % 4) * 8;
@@ -122,6 +122,8 @@ static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
        val |= 1 << (cpu + shift);
        writel(val, reg);
        spin_unlock(&irq_controller_lock);
+
+       return 0;
 }
 #endif
 
@@ -253,9 +255,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
 }
 
 #ifdef CONFIG_SMP
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
 {
-       unsigned long map = *cpus_addr(cpumask);
+       unsigned long map = *cpus_addr(*mask);
 
        /* this always happens on GIC0 */
        writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
index c367ae44012e91bc358ec84bb80f2db6e8bd0267..dcf8153a947dc684114f75150fb3840246a06dec 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc5
-# Tue Mar  3 21:45:57 2009
+# Linux kernel version: 2.6.30-rc4
+# Mon May  4 11:58:57 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
@@ -89,6 +89,7 @@ CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
@@ -101,6 +102,7 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
@@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
 # CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -237,6 +241,7 @@ CONFIG_AEABI=y
 CONFIG_ARCH_FLATMEM_HAS_HOLES=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -293,7 +300,6 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
@@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 CONFIG_WIRELESS=y
 CONFIG_CFG80211=y
 # CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_NL80211 is not set
 CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
 CONFIG_MAC80211=y
 
 #
@@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y
 # LPDDR flash memory drivers
 #
 # CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
 
 #
 # UBI - Unsorted block images
@@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -687,6 +696,7 @@ CONFIG_SATA_MV=y
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -724,8 +734,10 @@ CONFIG_MII=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_E1000E is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
 # CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
@@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=y
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_HERMES is not set
 # CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
 # CONFIG_PRISM54 is not set
 # CONFIG_USB_ZD1201 is not set
 # CONFIG_USB_NET_RNDIS_WLAN is not set
@@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y
 # CONFIG_RTL8187 is not set
 # CONFIG_ADM8211 is not set
 # CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
 # CONFIG_P54_COMMON is not set
 # CONFIG_ATH5K is not set
 # CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
 # CONFIG_IPW2100 is not set
 # CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
 # CONFIG_HOSTAP is not set
 # CONFIG_B43 is not set
 # CONFIG_B43LEGACY is not set
 # CONFIG_ZD1211RW is not set
 # CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
@@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
 # CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
@@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
 # OTG and related infrastructure
 #
 # CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_UWB is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
@@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y
 #
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
 CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y
 # DMA Clients
 #
 # CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
@@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
@@ -1360,6 +1388,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
 #
 # CD-ROM/DVD Filesystems
 #
@@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
@@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_NOP_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_RING_BUFFER=y
 CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
 
 #
 # Tracers
@@ -1551,11 +1589,15 @@ CONFIG_TRACING=y
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
 # CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
 # CONFIG_BOOT_TRACER is not set
 # CONFIG_TRACE_BRANCH_PROFILING is not set
 # CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y
 # Compression
 #
 # CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
 # CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
 
 #
 # Library routines
@@ -1682,7 +1728,7 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
index b0698722e0cbf6676cdf55f3c4841c6612720f32..398274b0771aa3538987eafad9143b063f34fc30 100644 (file)
@@ -1,11 +1,11 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 02:57:32 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May  4 14:22:12 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
@@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
@@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
 # CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
 # CONFIG_MARKERS is not set
 CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
@@ -87,10 +98,9 @@ CONFIG_KPROBES=y
 CONFIG_KRETPROBES=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
 CONFIG_BLOCK=y
 # CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
 
 #
 # System Type
@@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
@@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y
 # CONFIG_ARCH_ORION5X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
 
 #
 # Marvell MV78xx0 Implementations
 #
 CONFIG_MACH_DB78X00_BP=y
 CONFIG_MACH_RD78X00_MASA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
 CONFIG_PLAT_ORION=y
 
 #
@@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
 
 #
 # Bus support
@@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y
 # CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCI_LEGACY=y
 # CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 
 #
@@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -247,6 +260,11 @@ CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
 #
 # Floating point emulation
 #
@@ -263,6 +281,8 @@ CONFIG_VFP=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 
@@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y
 #
 # CONFIG_PM is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
@@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
 #
 CONFIG_NET_PKTGEN=m
 # CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -376,6 +392,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
 CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 # CONFIG_MTD_IMPA7 is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
@@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_CAFE is not set
@@ -465,6 +481,11 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_MTD_NAND_ORION=y
 # CONFIG_MTD_ONENAND is not set
 
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
 #
 # UBI - Unsorted block images
 #
@@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
 # CONFIG_SGI_IOC4 is not set
 # CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
 # CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
 # CONFIG_ATA_NONSTANDARD is not set
 CONFIG_SATA_PMP=y
@@ -632,11 +669,15 @@ CONFIG_SATA_MV=y
 #
 # IEEE 1394 (FireWire) support
 #
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
@@ -654,19 +714,25 @@ CONFIG_MII=y
 # CONFIG_NET_VENDOR_3COM is not set
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_NET_TULIP is not set
 # CONFIG_HP100 is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
 # CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 CONFIG_NET_PCI=y
 # CONFIG_PCNET32 is not set
 # CONFIG_AMD8111_ETH is not set
 # CONFIG_ADAPTEC_STARFIRE is not set
 # CONFIG_B44 is not set
 # CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
 # CONFIG_E100 is not set
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
@@ -676,18 +742,20 @@ CONFIG_NET_PCI=y
 # CONFIG_R6040 is not set
 # CONFIG_SIS900 is not set
 # CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
 # CONFIG_DL2K is not set
 # CONFIG_E1000 is not set
 # CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
 # CONFIG_IP1000 is not set
 # CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
 # CONFIG_NS83820 is not set
 # CONFIG_HAMACHI is not set
 # CONFIG_YELLOWFIN is not set
@@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
 # CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
 
@@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 
 #
 # USB Network Adapters
@@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_IPMI_HANDLER is not set
 # CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -799,44 +873,63 @@ CONFIG_DEVPORT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# PC SMBus host controller drivers
+#
 # CONFIG_I2C_ALI1535 is not set
 # CONFIG_I2C_ALI1563 is not set
 # CONFIG_I2C_ALI15X3 is not set
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
 # CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
 # CONFIG_I2C_VIA is not set
 # CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
 # CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
<