* @shost: SCSI host to invoke error handling on.
*
* Schedule SCSI EH without scmd.
- **/
+ */
void scsi_schedule_eh(struct Scsi_Host *shost)
{
unsigned long flags;
*
* Return value:
* 0 on failure.
- **/
+ */
int scsi_eh_scmd_add(struct scsi_cmnd *scmd, int eh_flag)
{
struct Scsi_Host *shost = scmd->device->host;
* This should be turned into an inline function. Each scsi command
* has its own timer, and as it is added to the queue, we set up the
* timer. When the command completes, we cancel the timer.
- **/
+ */
void scsi_add_timer(struct scsi_cmnd *scmd, int timeout,
void (*complete)(struct scsi_cmnd *))
{
* Return value:
* 1 if we were able to detach the timer. 0 if we blew it, and the
* timer function has already started to run.
- **/
+ */
int scsi_delete_timer(struct scsi_cmnd *scmd)
{
int rtn;
* only in that the normal completion handling might run, but if the
* normal completion function determines that the timer has already
* fired, then it mustn't do anything.
- **/
+ */
void scsi_times_out(struct scsi_cmnd *scmd)
{
enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
*
* Return value:
* 0 when dev was taken offline by error recovery. 1 OK to proceed.
- **/
+ */
int scsi_block_when_processing_errors(struct scsi_device *sdev)
{
int online;
* scsi_eh_prt_fail_stats - Log info on failures.
* @shost: scsi host being recovered.
* @work_q: Queue of scsi cmds to process.
- **/
+ */
static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
struct list_head *work_q)
{
* Notes:
* When a deferred error is detected the current command has
* not been executed and needs retrying.
- **/
+ */
static int scsi_check_sense(struct scsi_cmnd *scmd)
{
struct scsi_sense_hdr sshdr;
* queued during error recovery. the main difference here is that we
* don't allow for the possibility of retries here, and we are a lot
* more restrictive about what we consider acceptable.
- **/
+ */
static int scsi_eh_completed_normally(struct scsi_cmnd *scmd)
{
/*
/**
* scsi_eh_done - Completion function for error handling.
* @scmd: Cmd that is done.
- **/
+ */
static void scsi_eh_done(struct scsi_cmnd *scmd)
{
struct completion *eh_action;
/**
* scsi_try_host_reset - ask host adapter to reset itself
* @scmd: SCSI cmd to send hsot reset.
- **/
+ */
static int scsi_try_host_reset(struct scsi_cmnd *scmd)
{
unsigned long flags;
/**
* scsi_try_bus_reset - ask host to perform a bus reset
* @scmd: SCSI cmd to send bus reset.
- **/
+ */
static int scsi_try_bus_reset(struct scsi_cmnd *scmd)
{
unsigned long flags;
* unreliable for a given host, then the host itself needs to put a
* timer on it, and set the host back to a consistent state prior to
* returning.
- **/
+ */
static int scsi_try_bus_device_reset(struct scsi_cmnd *scmd)
{
int rtn;
* author of the low-level driver wishes this operation to be timed,
* they can provide this facility themselves. helper functions in
* scsi_error.c can be supplied to make this easier to do.
- **/
+ */
static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
{
/*
* sent must be one that does not transfer any data. If @sense_bytes != 0
* @cmnd is ignored and this functions sets up a REQUEST_SENSE command
* and cmnd buffers to read @sense_bytes into @scmd->sense_buffer.
- **/
+ */
void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
unsigned char *cmnd, int cmnd_size, unsigned sense_bytes)
{
* @ses: saved information from a coresponding call to scsi_prep_eh_cmnd
*
* Undo any damage done by above scsi_prep_eh_cmnd().
- **/
+ */
void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
{
/*
*
* Return value:
* SUCCESS or FAILED or NEEDS_RETRY
- **/
+ */
static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
int cmnd_size, int timeout, unsigned sense_bytes)
{
* Some hosts automatically obtain this information, others require
* that we obtain it on our own. This function will *not* return until
* the command either times out, or it completes.
- **/
+ */
static int scsi_request_sense(struct scsi_cmnd *scmd)
{
return scsi_send_eh_cmnd(scmd, NULL, 0, SENSE_TIMEOUT, ~0);
* and that would disturb what we are doing. Thus we really want to
* keep a list of pending commands for final completion, and once we
* are ready to leave error handling we handle completion for real.
- **/
+ */
void scsi_eh_finish_cmd(struct scsi_cmnd *scmd, struct list_head *done_q)
{
scmd->device->host->host_failed--;
*
* XXX: Long term this code should go away, but that needs an audit of
* all LLDDs first.
- **/
+ */
int scsi_eh_get_sense(struct list_head *work_q,
struct list_head *done_q)
{
*
* Return value:
* 0 - Device is ready. 1 - Device NOT ready.
- **/
+ */
static int scsi_eh_tur(struct scsi_cmnd *scmd)
{
static unsigned char tur_command[6] = {TEST_UNIT_READY, 0, 0, 0, 0, 0};
* command that has timed out. If the command simply failed, it makes
* no sense to try and abort the command, since as far as the shost
* adapter is concerned, it isn't running.
- **/
+ */
static int scsi_eh_abort_cmds(struct list_head *work_q,
struct list_head *done_q)
{
*
* Return value:
* 0 - Device is ready. 1 - Device NOT ready.
- **/
+ */
static int scsi_eh_try_stu(struct scsi_cmnd *scmd)
{
static unsigned char stu_command[6] = {START_STOP, 0, 0, 0, 1, 0};
* Notes:
* If commands are failing due to not ready, initializing command required,
* try revalidating the device, which will end up sending a start unit.
- **/
+ */
static int scsi_eh_stu(struct Scsi_Host *shost,
struct list_head *work_q,
struct list_head *done_q)
* devices that are jammed or not - if we have multiple devices, it
* makes no sense to try bus_device_reset - we really would need to try
* a bus_reset instead.
- **/
+ */
static int scsi_eh_bus_device_reset(struct Scsi_Host *shost,
struct list_head *work_q,
struct list_head *done_q)
* @shost: &scsi host being recovered.
* @work_q: &list_head for pending commands.
* @done_q: &list_head for processed commands.
- **/
+ */
static int scsi_eh_bus_reset(struct Scsi_Host *shost,
struct list_head *work_q,
struct list_head *done_q)
* scsi_eh_host_reset - send a host reset
* @work_q: list_head for processed commands.
* @done_q: list_head for processed commands.
- **/
+ */
static int scsi_eh_host_reset(struct list_head *work_q,
struct list_head *done_q)
{
* scsi_eh_offline_sdevs - offline scsi devices that fail to recover
* @work_q: list_head for processed commands.
* @done_q: list_head for processed commands.
- *
- **/
+ */
static void scsi_eh_offline_sdevs(struct list_head *work_q,
struct list_head *done_q)
{
* is woken. In cases where the error code indicates an error that
* doesn't require the error handler read (i.e. we don't need to
* abort/reset), this function should return SUCCESS.
- **/
+ */
int scsi_decide_disposition(struct scsi_cmnd *scmd)
{
int rtn;
*
* If scsi_allocate_request() fails for what ever reason, we
* completely forget to lock the door.
- **/
+ */
static void scsi_eh_lock_door(struct scsi_device *sdev)
{
unsigned char cmnd[MAX_COMMAND_SIZE];
* Notes:
* When we entered the error handler, we blocked all further i/o to
* this device. we need to 'reverse' this process.
- **/
+ */
static void scsi_restart_operations(struct Scsi_Host *shost)
{
struct scsi_device *sdev;
* @shost: host to be recovered.
* @work_q: &list_head for pending commands.
* @done_q: &list_head for processed commands.
- *
- **/
+ */
void scsi_eh_ready_devs(struct Scsi_Host *shost,
struct list_head *work_q,
struct list_head *done_q)
/**
* scsi_eh_flush_done_q - finish processed commands or retry them.
* @done_q: list_head of processed commands.
- *
- **/
+ */
void scsi_eh_flush_done_q(struct list_head *done_q)
{
struct scsi_cmnd *scmd, *next;
* scsi_finish_cmd() called for it. we do all of the retry stuff
* here, so when we restart the host after we return it should have an
* empty queue.
- **/
+ */
static void scsi_unjam_host(struct Scsi_Host *shost)
{
unsigned long flags;
* Notes:
* This is the main error handling loop. This is run as a kernel thread
* for every SCSI host and handles all error handling activity.
- **/
+ */
int scsi_error_handler(void *data)
{
struct Scsi_Host *shost = data;
*
* Return value:
* 1 if valid sense data information found, else 0;
- **/
+ */
int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
struct scsi_sense_hdr *sshdr)
{
*
* Return value:
* pointer to start of (first) descriptor if found else NULL
- **/
+ */
const u8 * scsi_sense_desc_find(const u8 * sense_buffer, int sb_len,
int desc_type)
{
*
* Return value:
* 1 if information field found, 0 if not found.
- **/
+ */
int scsi_get_sense_info_fld(const u8 * sense_buffer, int sb_len,
u64 * info_out)
{
git.samba.org / sfrench / cifs-2.6.git / commitdiff