#define c0_MPIDR 1 /* MultiProcessor ID Register */
#define c0_CSSELR 2 /* Cache Size Selection Register */
#define c1_SCTLR 3 /* System Control Register */
-#define c1_ACTLR 4 /* Auxilliary Control Register */
+#define c1_ACTLR 4 /* Auxiliary Control Register */
#define c1_CPACR 5 /* Coprocessor Access Control */
#define c2_TTBR0 6 /* Translation Table Base Register 0 */
#define c2_TTBR0_high 7 /* TTBR0 top 32 bits */
#endif
- @ Perform all needed substractions to keep only the reminder.
+ @ Perform all needed subtractions to keep only the reminder.
@ Do comparisons in batch of 4 first.
subs \order, \order, #3 @ yes, 3 is intended here
blt 2f
teqne \dividend, #0
beq 5f
- @ Either 1, 2 or 3 comparison/substractions are left.
+ @ Either 1, 2 or 3 comparison/subtractions are left.
2: cmn \order, #2
blt 4f
beq 3f
#define MPIDR_EL1 1 /* MultiProcessor Affinity Register */
#define CSSELR_EL1 2 /* Cache Size Selection Register */
#define SCTLR_EL1 3 /* System Control Register */
-#define ACTLR_EL1 4 /* Auxilliary Control Register */
+#define ACTLR_EL1 4 /* Auxiliary Control Register */
#define CPACR_EL1 5 /* Coprocessor Access Control */
#define TTBR0_EL1 6 /* Translation Table Base Register 0 */
#define TTBR1_EL1 7 /* Translation Table Base Register 1 */
the CPU core definition and currently needs to be selected manually.
Multiprocessor support in implemented with external cache and
- interrupt controlers.
+ interrupt controllers.
The MX interrupt distributer adds Interprocessor Interrupts
and causes the IRQ numbers to be increased by 4 for devices
typedef struct {
AMD_ACPI_DESCRIPTION_HEADER SHeader;
UCHAR TableUUID[16]; //0x24
- ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the stucture.
- ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the stucture.
+ ULONG VBIOSImageOffset; //0x34. Offset to the first GOP_VBIOS_CONTENT block from the beginning of the structure.
+ ULONG Lib1ImageOffset; //0x38. Offset to the first GOP_LIB1_CONTENT block from the beginning of the structure.
ULONG Reserved[4]; //0x3C
}UEFI_ACPI_VFCT;
* About SOFTNET:
* Most of the changes were pretty obvious and basically done by HE already.
*
- * One problem of the isdn net device code is that is uses struct net_device
+ * One problem of the isdn net device code is that it uses struct net_device
* for masters and slaves. However, only master interface are registered to
* the network layer, and therefore, it only makes sense to call netif_*
* functions on them.
#define ABIST_BIN4_VGA3 0x01D4
#define ABIST_BIN5_VGA4 0x01D8
#define ABIST_BIN6_VGA5 0x01DC
-#define ABIST_BIN7_VGA6 0x0x1E0
-#define ABIST_CLAMP_A 0x0x1E4
-#define ABIST_CLAMP_B 0x0x1E8
+#define ABIST_BIN7_VGA6 0x01E0
+#define ABIST_CLAMP_A 0x01E4
+#define ABIST_CLAMP_B 0x01E8
#define ABIST_CLAMP_C 0x01EC
#define ABIST_CLAMP_D 0x01F0
#define ABIST_CLAMP_E 0x01F4
depends on ACPI
---help---
This driver adds support for the built-in accelerometer
- found on recent Toshiba laptops equiped with HID TOS620A
+ found on recent Toshiba laptops equipped with HID TOS620A
device.
This driver receives ACPI notify events 0x80 when the sensor
been stabilized.
Also provides sysfs entries to get/set the desired protection
- level and reseting the HDD protection interface.
+ level and resetting the HDD protection interface.
If you have a recent Toshiba laptop with a built-in accelerometer
device, say Y.
* @destid: destID to reserve
*
* Tries to reserve the specified destID.
- * Returns 0 if successfull.
+ * Returns 0 if successful.
*/
static int rio_destid_reserve(struct rio_net *net, u16 destid)
{
This option enables the new blk-mq based I/O path for SCSI
devices by default. With the option the scsi_mod.use_blk_mq
module/boot option defaults to Y, without it to N, but it can
- still be overriden either way.
+ still be overridden either way.
If unsure say N.
* returns a pointer to that log in the private_data field in @file.
*
* Returns:
- * This function returns zero if successful. On error it will return an negative
+ * This function returns zero if successful. On error it will return a negative
* error value.
**/
static int
* returns a pointer to that log in the private_data field in @file.
*
* Returns:
- * This function returns zero if successful. On error it will return an negative
+ * This function returns zero if successful. On error it will return a negative
* error value.
**/
static int
* returns a pointer to that log in the private_data field in @file.
*
* Returns:
- * This function returns zero if successful. On error it will return an negative
+ * This function returns zero if successful. On error it will return a negative
* error value.
**/
static int
* returns a pointer to that log in the private_data field in @file.
*
* Returns:
- * This function returns zero if successful. On error it will return an negative
+ * This function returns zero if successful. On error it will return a negative
* error value.
**/
static int
* returns a pointer to that log in the private_data field in @file.
*
* Returns:
- * This function returns zero if successful. On error it will return an negative
+ * This function returns zero if successful. On error it will return a negative
* error value.
**/
static int
* returns a pointer to that log in the private_data field in @file.
*
* Returns:
- * This function returns zero if successful. On error it will return an negative
+ * This function returns zero if successful. On error it will return a negative
* error value.
**/
static int
/**
* megasas_release_mfi - Reverses the FW initialization
- * @intance: Adapter soft state
+ * @instance: Adapter soft state
*/
static void megasas_release_mfi(struct megasas_instance *instance)
{
/**
* megasas_release_fusion - Reverses the FW initialization
- * @intance: Adapter soft state
+ * @instance: Adapter soft state
*/
void
megasas_release_fusion(struct megasas_instance *instance)
ret_val = qla4_83xx_flash_read_u32(ha, addr, p_buff,
tmplt_hdr_def_size);
if (ret_val != QLA_SUCCESS) {
- ql4_printk(KERN_ERR, ha, "%s: Failed to read reset tempelate\n",
+ ql4_printk(KERN_ERR, ha, "%s: Failed to read reset template\n",
__func__);
goto exit_read_template_error;
}
if ((config & ENABLE_INTERNAL_LOOPBACK) ||
(config & ENABLE_EXTERNAL_LOOPBACK)) {
- ql4_printk(KERN_INFO, ha, "%s: Loopback diagnostics already in progress. Invalid requiest\n",
+ ql4_printk(KERN_INFO, ha, "%s: Loopback diagnostics already in progress. Invalid request\n",
__func__);
goto exit_pre_loopback_config;
}
---help---
Say Y here if you want to use a FTDI SIO single port USB to serial
converter device. The implementation I have is called the USC-1000.
- This driver has also be tested with the 245 and 232 devices.
+ This driver has also been tested with the 245 and 232 devices.
See <http://ftdi-usb-sio.sourceforge.net/> for more
information on this driver and the device.
*
* Implements the standard CRC ITU-T V.41:
* Width 16
- * Poly 0x0x1021 (x^16 + x^12 + x^15 + 1)
+ * Poly 0x1021 (x^16 + x^12 + x^15 + 1)
* Init 0
*
* This source code is licensed under the GNU General Public License,
*
* ebtables.c,v 2.0, April, 2002
*
- * This code is stongly inspired on the iptables code which is
+ * This code is strongly inspired by the iptables code which is
* Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling
*/
#ifndef __LINUX_BRIDGE_EFF_H
* struct rio_net - RIO network info
* @node: Node in global list of RIO networks
* @devices: List of devices in this network
- * @switches: List of switches in this netowrk
+ * @switches: List of switches in this network
* @mports: List of master ports accessing this network
* @hport: Default port for accessing this network
* @id: RIO network ID
*
* ebtables.c,v 2.0, April, 2002
*
- * This code is stongly inspired on the iptables code which is
+ * This code is strongly inspired by the iptables code which is
* Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling
*/
#include <linux/module.h>
#include <linux/crc-itu-t.h>
-/** CRC table for the CRC ITU-T V.41 0x0x1021 (x^16 + x^12 + x^15 + 1) */
+/** CRC table for the CRC ITU-T V.41 0x1021 (x^16 + x^12 + x^15 + 1) */
const u16 crc_itu_t_table[256] = {
0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7,
0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef,
*
* ebtables.c,v 2.0, July, 2002
*
- * This code is stongly inspired on the iptables code which is
+ * This code is strongly inspired by the iptables code which is
* Copyright (C) 1999 Paul `Rusty' Russell & Michael J. Neuling
*
* This program is free software; you can redistribute it and/or
git.samba.org / sfrench / cifs-2.6.git / commitdiff