i2c-mpc: drop NO_IRQ
authorWolfram Sang <w.sang@pengutronix.de>
Sun, 4 Oct 2009 11:08:16 +0000 (13:08 +0200)
committerBen Dooks <ben-linux@fluff.org>
Wed, 19 May 2010 23:19:01 +0000 (00:19 +0100)
Drop NO_IRQ as 0 is the preferred way to describe 'no irq'
(http://lkml.org/lkml/2005/11/21/221). This change is safe, as the driver is
only used on powerpc, where NO_IRQ is 0 anyhow.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Ben Dooks <ben-linux@fluff.org>
drivers/i2c/busses/i2c-mpc.c

index f1321f7637891d09846a1c1f988856c68845c81c..e86cef300c7d694090a15df38cb627e4182d8c61 100644 (file)
@@ -118,7 +118,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
        u32 x;
        int result = 0;
 
-       if (i2c->irq == NO_IRQ) {
+       if (!i2c->irq) {
                while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) {
                        schedule();
                        if (time_after(jiffies, orig_jiffies + timeout)) {
@@ -568,7 +568,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
        }
 
        i2c->irq = irq_of_parse_and_map(op->node, 0);
-       if (i2c->irq != NO_IRQ) { /* i2c->irq = NO_IRQ implies polling */
+       if (i2c->irq) { /* no i2c->irq implies polling */
                result = request_irq(i2c->irq, mpc_i2c_isr,
                                     IRQF_SHARED, "i2c-mpc", i2c);
                if (result < 0) {
@@ -627,7 +627,7 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
        i2c_del_adapter(&i2c->adap);
        dev_set_drvdata(&op->dev, NULL);
 
-       if (i2c->irq != NO_IRQ)
+       if (i2c->irq)
                free_irq(i2c->irq, i2c);
 
        irq_dispose_mapping(i2c->irq);