clk: qcom: Add Krait clock controller driver

The Krait CPU clocks are made up of a primary mux and secondary
mux for each CPU and the L2, controlled via cp15 accessors. For
Kraits within KPSSv1 each secondary mux accepts a different aux
source, but on KPSSv2 each secondary mux accepts the same aux
source.

Cc: <devicetree@vger.kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Tested-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index bed7ef4f51a273f9617e5155620b995dbb9db72e..646bc38d2993973371835f43d1d1af7e18def197 100644 (file)
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -292,3 +292,11 @@ config KPSS_XCC
          Support for the Krait ACC and GCC clock controllers. Say Y
          if you want to support CPU frequency scaling on devices such
          as MSM8960, APQ8064, etc.
+
+config KRAITCC
+       tristate "Krait Clock Controller"
+       depends on COMMON_CLK_QCOM && ARM
+       select KRAIT_CLOCKS
+       help
+         Support for the Krait CPU clocks on Qualcomm devices.
+         Say Y if you want to support CPU frequency scaling.

diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 92310ee33e9e5f908f3f0cb07605247a6f4c5420..949829b18813ecdac368f33e1e72db94fb020c49 100644 (file)
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -47,3 +47,4 @@ obj-$(CONFIG_SDM_VIDEOCC_845) += videocc-sdm845.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
 obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
+obj-$(CONFIG_KRAITCC) += krait-cc.o

diff --git a/drivers/clk/qcom/clk-krait.c b/drivers/clk/qcom/clk-krait.c
index 2e417678029f88d04aacfc8a30d73d4f17fc836b..7ede744c6a14ff0f136ecc67f8486820c1c3170d 100644 (file)
--- a/drivers/clk/qcom/clk-krait.c
+++ b/drivers/clk/qcom/clk-krait.c
@@ -44,7 +44,7 @@ static int krait_mux_set_parent(struct clk_hw *hw, u8 index)
        struct krait_mux_clk *mux = to_krait_mux_clk(hw);
        u32 sel;
 
-       sel = clk_mux_reindex(index, mux->parent_map, 0);
+       sel = clk_mux_index_to_val(mux->parent_map, 0, index);
        mux->en_mask = sel;
        /* Don't touch mux if CPU is off as it won't work */
        if (__clk_is_enabled(hw->clk))
@@ -63,7 +63,7 @@ static u8 krait_mux_get_parent(struct clk_hw *hw)
        sel &= mux->mask;
        mux->en_mask = sel;
 
-       return clk_mux_get_parent(hw, sel, mux->parent_map, 0);
+       return clk_mux_val_to_index(hw, mux->parent_map, 0, sel);
 }
 
 const struct clk_ops krait_mux_clk_ops = {

diff --git a/drivers/clk/qcom/krait-cc.c b/drivers/clk/qcom/krait-cc.c
new file mode 100644 (file)
index 0000000..7c9dfb0
--- /dev/null
+++ b/drivers/clk/qcom/krait-cc.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+
+#include "clk-krait.h"
+
+static unsigned int sec_mux_map[] = {
+       2,
+       0,
+};
+
+static unsigned int pri_mux_map[] = {
+       1,
+       2,
+       0,
+};
+
+static int
+krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
+{
+       struct krait_div2_clk *div;
+       struct clk_init_data init = {
+               .num_parents = 1,
+               .ops = &krait_div2_clk_ops,
+               .flags = CLK_SET_RATE_PARENT,
+       };
+       const char *p_names[1];
+       struct clk *clk;
+
+       div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+       if (!div)
+               return -ENOMEM;
+
+       div->width = 2;
+       div->shift = 6;
+       div->lpl = id >= 0;
+       div->offset = offset;
+       div->hw.init = &init;
+
+       init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
+       if (!init.name)
+               return -ENOMEM;
+
+       init.parent_names = p_names;
+       p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
+       if (!p_names[0]) {
+               kfree(init.name);
+               return -ENOMEM;
+       }
+
+       clk = devm_clk_register(dev, &div->hw);
+       kfree(p_names[0]);
+       kfree(init.name);
+
+       return PTR_ERR_OR_ZERO(clk);
+}
+
+static int
+krait_add_sec_mux(struct device *dev, int id, const char *s,
+                 unsigned int offset, bool unique_aux)
+{
+       struct krait_mux_clk *mux;
+       static const char *sec_mux_list[] = {
+               "acpu_aux",
+               "qsb",
+       };
+       struct clk_init_data init = {
+               .parent_names = sec_mux_list,
+               .num_parents = ARRAY_SIZE(sec_mux_list),
+               .ops = &krait_mux_clk_ops,
+               .flags = CLK_SET_RATE_PARENT,
+       };
+       struct clk *clk;
+
+       mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+       if (!mux)
+               return -ENOMEM;
+
+       mux->offset = offset;
+       mux->lpl = id >= 0;
+       mux->mask = 0x3;
+       mux->shift = 2;
+       mux->parent_map = sec_mux_map;
+       mux->hw.init = &init;
+
+       init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
+       if (!init.name)
+               return -ENOMEM;
+
+       if (unique_aux) {
+               sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
+               if (!sec_mux_list[0]) {
+                       clk = ERR_PTR(-ENOMEM);
+                       goto err_aux;
+               }
+       }
+
+       clk = devm_clk_register(dev, &mux->hw);
+
+       if (unique_aux)
+               kfree(sec_mux_list[0]);
+err_aux:
+       kfree(init.name);
+       return PTR_ERR_OR_ZERO(clk);
+}
+
+static struct clk *
+krait_add_pri_mux(struct device *dev, int id, const char *s,
+                 unsigned int offset)
+{
+       struct krait_mux_clk *mux;
+       const char *p_names[3];
+       struct clk_init_data init = {
+               .parent_names = p_names,
+               .num_parents = ARRAY_SIZE(p_names),
+               .ops = &krait_mux_clk_ops,
+               .flags = CLK_SET_RATE_PARENT,
+       };
+       struct clk *clk;
+
+       mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+       if (!mux)
+               return ERR_PTR(-ENOMEM);
+
+       mux->mask = 0x3;
+       mux->shift = 0;
+       mux->offset = offset;
+       mux->lpl = id >= 0;
+       mux->parent_map = pri_mux_map;
+       mux->hw.init = &init;
+
+       init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
+       if (!init.name)
+               return ERR_PTR(-ENOMEM);
+
+       p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
+       if (!p_names[0]) {
+               clk = ERR_PTR(-ENOMEM);
+               goto err_p0;
+       }
+
+       p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
+       if (!p_names[1]) {
+               clk = ERR_PTR(-ENOMEM);
+               goto err_p1;
+       }
+
+       p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
+       if (!p_names[2]) {
+               clk = ERR_PTR(-ENOMEM);
+               goto err_p2;
+       }
+
+       clk = devm_clk_register(dev, &mux->hw);
+
+       kfree(p_names[2]);
+err_p2:
+       kfree(p_names[1]);
+err_p1:
+       kfree(p_names[0]);
+err_p0:
+       kfree(init.name);
+       return clk;
+}
+
+/* id < 0 for L2, otherwise id == physical CPU number */
+static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux)
+{
+       int ret;
+       unsigned int offset;
+       void *p = NULL;
+       const char *s;
+       struct clk *clk;
+
+       if (id >= 0) {
+               offset = 0x4501 + (0x1000 * id);
+               s = p = kasprintf(GFP_KERNEL, "%d", id);
+               if (!s)
+                       return ERR_PTR(-ENOMEM);
+       } else {
+               offset = 0x500;
+               s = "_l2";
+       }
+
+       ret = krait_add_div(dev, id, s, offset);
+       if (ret) {
+               clk = ERR_PTR(ret);
+               goto err;
+       }
+
+       ret = krait_add_sec_mux(dev, id, s, offset, unique_aux);
+       if (ret) {
+               clk = ERR_PTR(ret);
+               goto err;
+       }
+
+       clk = krait_add_pri_mux(dev, id, s, offset);
+err:
+       kfree(p);
+       return clk;
+}
+
+static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data)
+{
+       unsigned int idx = clkspec->args[0];
+       struct clk **clks = data;
+
+       if (idx >= 5) {
+               pr_err("%s: invalid clock index %d\n", __func__, idx);
+               return ERR_PTR(-EINVAL);
+       }
+
+       return clks[idx] ? : ERR_PTR(-ENODEV);
+}
+
+static const struct of_device_id krait_cc_match_table[] = {
+       { .compatible = "qcom,krait-cc-v1", (void *)1UL },
+       { .compatible = "qcom,krait-cc-v2" },
+       {}
+};
+MODULE_DEVICE_TABLE(of, krait_cc_match_table);
+
+static int krait_cc_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       const struct of_device_id *id;
+       unsigned long cur_rate, aux_rate;
+       int cpu;
+       struct clk *clk;
+       struct clk **clks;
+       struct clk *l2_pri_mux_clk;
+
+       id = of_match_device(krait_cc_match_table, dev);
+       if (!id)
+               return -ENODEV;
+
+       /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */
+       clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1);
+       if (IS_ERR(clk))
+               return PTR_ERR(clk);
+
+       if (!id->data) {
+               clk = clk_register_fixed_factor(dev, "acpu_aux",
+                                               "gpll0_vote", 0, 1, 2);
+               if (IS_ERR(clk))
+                       return PTR_ERR(clk);
+       }
+
+       /* Krait configurations have at most 4 CPUs and one L2 */
+       clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL);
+       if (!clks)
+               return -ENOMEM;
+
+       for_each_possible_cpu(cpu) {
+               clk = krait_add_clks(dev, cpu, id->data);
+               if (IS_ERR(clk))
+                       return PTR_ERR(clk);
+               clks[cpu] = clk;
+       }
+
+       l2_pri_mux_clk = krait_add_clks(dev, -1, id->data);
+       if (IS_ERR(l2_pri_mux_clk))
+               return PTR_ERR(l2_pri_mux_clk);
+       clks[4] = l2_pri_mux_clk;
+
+       /*
+        * We don't want the CPU or L2 clocks to be turned off at late init
+        * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the
+        * refcount of these clocks. Any cpufreq/hotplug manager can assume
+        * that the clocks have already been prepared and enabled by the time
+        * they take over.
+        */
+       for_each_online_cpu(cpu) {
+               clk_prepare_enable(l2_pri_mux_clk);
+               WARN(clk_prepare_enable(clks[cpu]),
+                    "Unable to turn on CPU%d clock", cpu);
+       }
+
+       /*
+        * Force reinit of HFPLLs and muxes to overwrite any potential
+        * incorrect configuration of HFPLLs and muxes by the bootloader.
+        * While at it, also make sure the cores are running at known rates
+        * and print the current rate.
+        *
+        * The clocks are set to aux clock rate first to make sure the
+        * secondary mux is not sourcing off of QSB. The rate is then set to
+        * two different rates to force a HFPLL reinit under all
+        * circumstances.
+        */
+       cur_rate = clk_get_rate(l2_pri_mux_clk);
+       aux_rate = 384000000;
+       if (cur_rate == 1) {
+               pr_info("L2 @ QSB rate. Forcing new rate.\n");
+               cur_rate = aux_rate;
+       }
+       clk_set_rate(l2_pri_mux_clk, aux_rate);
+       clk_set_rate(l2_pri_mux_clk, 2);
+       clk_set_rate(l2_pri_mux_clk, cur_rate);
+       pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000);
+       for_each_possible_cpu(cpu) {
+               clk = clks[cpu];
+               cur_rate = clk_get_rate(clk);
+               if (cur_rate == 1) {
+                       pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu);
+                       cur_rate = aux_rate;
+               }
+
+               clk_set_rate(clk, aux_rate);
+               clk_set_rate(clk, 2);
+               clk_set_rate(clk, cur_rate);
+               pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000);
+       }
+
+       of_clk_add_provider(dev->of_node, krait_of_get, clks);
+
+       return 0;
+}
+
+static struct platform_driver krait_cc_driver = {
+       .probe = krait_cc_probe,
+       .driver = {
+               .name = "krait-cc",
+               .of_match_table = krait_cc_match_table,
+       },
+};
+module_platform_driver(krait_cc_driver);
+
+MODULE_DESCRIPTION("Krait CPU Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:krait-cc");