* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
security: unexport mmap_min_addr
SELinux: use SECINITSID_NETMSG instead of SECINITSID_UNLABELED for NetLabel
security: Protection for exploiting null dereference using mmap
SELinux: Use %lu for inode->i_no when printing avc
SELinux: allow preemption between transition permission checks
selinux: introduce schedule points in policydb_destroy()
selinux: add selinuxfs structure for object class discovery
selinux: change sel_make_dir() to specify inode counter.
selinux: rename sel_remove_bools() for more general usage.
selinux: add support for querying object classes and permissions from the running policy
Well, not for some odd devices. See the next section for information
about that.
- DAC Addressing for Address Space Hungry Devices
-
-There exists a class of devices which do not mesh well with the PCI
-DMA mapping API. By definition these "mappings" are a finite
-resource. The number of total available mappings per bus is platform
-specific, but there will always be a reasonable amount.
-
-What is "reasonable"? Reasonable means that networking and block I/O
-devices need not worry about using too many mappings.
-
-As an example of a problematic device, consider compute cluster cards.
-They can potentially need to access gigabytes of memory at once via
-DMA. Dynamic mappings are unsuitable for this kind of access pattern.
-
-To this end we've provided a small API by which a device driver
-may use DAC cycles to directly address all of physical memory.
-Not all platforms support this, but most do. It is easy to determine
-whether the platform will work properly at probe time.
-
-First, understand that there may be a SEVERE performance penalty for
-using these interfaces on some platforms. Therefore, you MUST only
-use these interfaces if it is absolutely required. %99 of devices can
-use the normal APIs without any problems.
-
-Note that for streaming type mappings you must either use these
-interfaces, or the dynamic mapping interfaces above. You may not mix
-usage of both for the same device. Such an act is illegal and is
-guaranteed to put a banana in your tailpipe.
-
-However, consistent mappings may in fact be used in conjunction with
-these interfaces. Remember that, as defined, consistent mappings are
-always going to be SAC addressable.
-
-The first thing your driver needs to do is query the PCI platform
-layer if it is capable of handling your devices DAC addressing
-capabilities:
-
- int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
-
-You may not use the following interfaces if this routine fails.
-
-Next, DMA addresses using this API are kept track of using the
-dma64_addr_t type. It is guaranteed to be big enough to hold any
-DAC address the platform layer will give to you from the following
-routines. If you have consistent mappings as well, you still
-use plain dma_addr_t to keep track of those.
-
-All mappings obtained here will be direct. The mappings are not
-translated, and this is the purpose of this dialect of the DMA API.
-
-All routines work with page/offset pairs. This is the _ONLY_ way to
-portably refer to any piece of memory. If you have a cpu pointer
-(which may be validly DMA'd too) you may easily obtain the page
-and offset using something like this:
-
- struct page *page = virt_to_page(ptr);
- unsigned long offset = offset_in_page(ptr);
-
-Here are the interfaces:
-
- dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
- struct page *page,
- unsigned long offset,
- int direction);
-
-The DAC address for the tuple PAGE/OFFSET are returned. The direction
-argument is the same as for pci_{map,unmap}_single(). The same rules
-for cpu/device access apply here as for the streaming mapping
-interfaces. To reiterate:
-
- The cpu may touch the buffer before pci_dac_page_to_dma.
- The device may touch the buffer after pci_dac_page_to_dma
- is made, but the cpu may NOT.
-
-When the DMA transfer is complete, invoke:
-
- void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
- dma64_addr_t dma_addr,
- size_t len, int direction);
-
-This must be done before the CPU looks at the buffer again.
-This interface behaves identically to pci_dma_sync_{single,sg}_for_cpu().
-
-And likewise, if you wish to let the device get back at the buffer after
-the cpu has read/written it, invoke:
-
- void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
- dma64_addr_t dma_addr,
- size_t len, int direction);
-
-before letting the device access the DMA area again.
-
-If you need to get back to the PAGE/OFFSET tuple from a dma64_addr_t
-the following interfaces are provided:
-
- struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
- dma64_addr_t dma_addr);
- unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
- dma64_addr_t dma_addr);
-
-This is possible with the DAC interfaces purely because they are
-not translated in any way.
-
Optimizing Unmap State Space Consumption
On many platforms, pci_unmap_{single,page}() is simply a nop.
!Edrivers/spi/spi.c
</chapter>
+ <chapter id="i2c">
+ <title>I<superscript>2</superscript>C and SMBus Subsystem</title>
+
+ <para>
+ I<superscript>2</superscript>C (or without fancy typography, "I2C")
+ is an acronym for the "Inter-IC" bus, a simple bus protocol which is
+ widely used where low data rate communications suffice.
+ Since it's also a licensed trademark, some vendors use another
+ name (such as "Two-Wire Interface", TWI) for the same bus.
+ I2C only needs two signals (SCL for clock, SDA for data), conserving
+ board real estate and minimizing signal quality issues.
+ Most I2C devices use seven bit addresses, and bus speeds of up
+ to 400 kHz; there's a high speed extension (3.4 MHz) that's not yet
+ found wide use.
+ I2C is a multi-master bus; open drain signaling is used to
+ arbitrate between masters, as well as to handshake and to
+ synchronize clocks from slower clients.
+ </para>
+
+ <para>
+ The Linux I2C programming interfaces support only the master
+ side of bus interactions, not the slave side.
+ The programming interface is structured around two kinds of driver,
+ and two kinds of device.
+ An I2C "Adapter Driver" abstracts the controller hardware; it binds
+ to a physical device (perhaps a PCI device or platform_device) and
+ exposes a <structname>struct i2c_adapter</structname> representing
+ each I2C bus segment it manages.
+ On each I2C bus segment will be I2C devices represented by a
+ <structname>struct i2c_client</structname>. Those devices will
+ be bound to a <structname>struct i2c_driver</structname>,
+ which should follow the standard Linux driver model.
+ (At this writing, a legacy model is more widely used.)
+ There are functions to perform various I2C protocol operations; at
+ this writing all such functions are usable only from task context.
+ </para>
+
+ <para>
+ The System Management Bus (SMBus) is a sibling protocol. Most SMBus
+ systems are also I2C conformant. The electrical constraints are
+ tighter for SMBus, and it standardizes particular protocol messages
+ and idioms. Controllers that support I2C can also support most
+ SMBus operations, but SMBus controllers don't support all the protocol
+ options that an I2C controller will.
+ There are functions to perform various SMBus protocol operations,
+ either using I2C primitives or by issuing SMBus commands to
+ i2c_adapter devices which don't support those I2C operations.
+ </para>
+
+!Iinclude/linux/i2c.h
+!Fdrivers/i2c/i2c-boardinfo.c i2c_register_board_info
+!Edrivers/i2c/i2c-core.c
+ </chapter>
+
<chapter id="splice">
<title>splice API</title>
<para>)
!Ffs/splice.c
</chapter>
+
</book>
--- /dev/null
+ A Simple Guide to Configure KGDB
+
+ Sonic Zhang <sonic.zhang@analog.com>
+ Aug. 24th 2006
+
+
+This KGDB patch enables the kernel developer to do source level debugging on
+the kernel for the Blackfin architecture. The debugging works over either the
+ethernet interface or one of the uarts. Both software breakpoints and
+hardware breakpoints are supported in this version.
+http://docs.blackfin.uclinux.org/doku.php?id=kgdb
+
+
+2 known issues:
+1. This bug:
+ http://blackfin.uclinux.org/tracker/index.php?func=detail&aid=544&group_id=18&atid=145
+ The GDB client for Blackfin uClinux causes incorrect values of local
+ variables to be displayed when the user breaks the running of kernel in GDB.
+2. Because of a hardware bug in Blackfin 533 v1.0.3:
+ 05000067 - Watchpoints (Hardware Breakpoints) are not supported
+ Hardware breakpoints cannot be set properly.
+
+
+Debug over Ethernet:
+
+1. Compile and install the cross platform version of gdb for blackfin, which
+ can be found at $(BINROOT)/bfin-elf-gdb.
+
+2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under
+ "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb".
+ With this selected, option "Full Symbolic/Source Debugging support" and
+ "Compile the kernel with frame pointers" are also selected.
+
+3. Select option "KGDB: connect over (Ethernet)". Add "kgdboe=@target-IP/,@host-IP/" to
+ the option "Compiled-in Kernel Boot Parameter" under "Kernel hacking".
+
+4. Connect minicom to the serial port and boot the kernel image.
+
+5. Configure the IP "/> ifconfig eth0 target-IP"
+
+6. Start GDB client "bfin-elf-gdb vmlinux".
+
+7. Connect to the target "(gdb) target remote udp:target-IP:6443".
+
+8. Set software breakpoint "(gdb) break sys_open".
+
+9. Continue "(gdb) c".
+
+10. Run ls in the target console "/> ls".
+
+11. Breakpoint hits. "Breakpoint 1: sys_open(..."
+
+12. Display local variables and function paramters.
+ (*) This operation gives wrong results, see known issue 1.
+
+13. Single stepping "(gdb) si".
+
+14. Remove breakpoint 1. "(gdb) del 1"
+
+15. Set hardware breakpoint "(gdb) hbreak sys_open".
+
+16. Continue "(gdb) c".
+
+17. Run ls in the target console "/> ls".
+
+18. Hardware breakpoint hits. "Breakpoint 1: sys_open(...".
+ (*) This hardware breakpoint will not be hit, see known issue 2.
+
+19. Continue "(gdb) c".
+
+20. Interrupt the target in GDB "Ctrl+C".
+
+21. Detach from the target "(gdb) detach".
+
+22. Exit GDB "(gdb) quit".
+
+
+Debug over the UART:
+
+1. Compile and install the cross platform version of gdb for blackfin, which
+ can be found at $(BINROOT)/bfin-elf-gdb.
+
+2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under
+ "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb".
+ With this selected, option "Full Symbolic/Source Debugging support" and
+ "Compile the kernel with frame pointers" are also selected.
+
+3. Select option "KGDB: connect over (UART)". Set "KGDB: UART port number" to be
+ a different one from the console. Don't forget to change the mode of
+ blackfin serial driver to PIO. Otherwise kgdb works incorrectly on UART.
+
+4. If you want connect to kgdb when the kernel boots, enable
+ "KGDB: Wait for gdb connection early"
+
+5. Compile kernel.
+
+6. Connect minicom to the serial port of the console and boot the kernel image.
+
+7. Start GDB client "bfin-elf-gdb vmlinux".
+
+8. Set the baud rate in GDB "(gdb) set remotebaud 57600".
+
+9. Connect to the target on the second serial port "(gdb) target remote /dev/ttyS1".
+
+10. Set software breakpoint "(gdb) break sys_open".
+
+11. Continue "(gdb) c".
+
+12. Run ls in the target console "/> ls".
+
+13. A breakpoint is hit. "Breakpoint 1: sys_open(..."
+
+14. All other operations are the same as that in KGDB over Ethernet.
+
+
+Debug over the same UART as console:
+
+1. Compile and install the cross platform version of gdb for blackfin, which
+ can be found at $(BINROOT)/bfin-elf-gdb.
+
+2. Apply this patch to the 2.6.x kernel. Select the menuconfig option under
+ "Kernel hacking" -> "Kernel debugging" -> "KGDB: kernel debug with remote gdb".
+ With this selected, option "Full Symbolic/Source Debugging support" and
+ "Compile the kernel with frame pointers" are also selected.
+
+3. Select option "KGDB: connect over UART". Set "KGDB: UART port number" to console.
+ Don't forget to change the mode of blackfin serial driver to PIO.
+ Otherwise kgdb works incorrectly on UART.
+
+4. If you want connect to kgdb when the kernel boots, enable
+ "KGDB: Wait for gdb connection early"
+
+5. Connect minicom to the serial port and boot the kernel image.
+
+6. (Optional) Ask target to wait for gdb connection by entering Ctrl+A. In minicom, you should enter Ctrl+A+A.
+
+7. Start GDB client "bfin-elf-gdb vmlinux".
+
+8. Set the baud rate in GDB "(gdb) set remotebaud 57600".
+
+9. Connect to the target "(gdb) target remote /dev/ttyS0".
+
+10. Set software breakpoint "(gdb) break sys_open".
+
+11. Continue "(gdb) c". Then enter Ctrl+C twice to stop GDB connection.
+
+12. Run ls in the target console "/> ls". Dummy string can be seen on the console.
+
+13. Then connect the gdb to target again. "(gdb) target remote /dev/ttyS0".
+ Now you will find a breakpoint is hit. "Breakpoint 1: sys_open(..."
+
+14. All other operations are the same as that in KGDB over Ethernet. The only
+ difference is that after continue command in GDB, please stop GDB
+ connection by 2 "Ctrl+C"s and connect again after breakpoints are hit or
+ Ctrl+A is entered.
---------------------------
-What: Multipath cached routing support in ipv4
-When: in 2.6.23
-Why: Code was merged, then submitter immediately disappeared leaving
- us with no maintainer and lots of bugs. The code should not have
- been merged in the first place, and many aspects of it's
- implementation are blocking more critical core networking
- development. It's marked EXPERIMENTAL and no distribution
- enables it because it cause obscure crashes due to unfixable bugs
- (interfaces don't return errors so memory allocation can't be
- handled, calling contexts of these interfaces make handling
- errors impossible too because they get called after we've
- totally commited to creating a route object, for example).
- This problem has existed for years and no forward progress
- has ever been made, and nobody steps up to try and salvage
- this code, so we're going to finally just get rid of it.
-Who: David S. Miller <davem@davemloft.net>
-
----------------------------
-
What: read_dev_chars(), read_conf_data{,_lpm}() (s390 common I/O layer)
When: December 2007
Why: These functions are a leftover from 2.4 times. They have several
---------------------------
+What: Legacy RTC drivers (under drivers/i2c/chips)
+When: November 2007
+Why: Obsolete. We have a RTC subsystem with better drivers.
+Who: Jean Delvare <khali@linux-fr.org>
+
+---------------------------
+
+What: iptables SAME target
+When: 1.1. 2008
+Files: net/ipv4/netfilter/ipt_SAME.c, include/linux/netfilter_ipv4/ipt_SAME.h
+Why: Obsolete for multiple years now, NAT core provides the same behaviour.
+ Unfixable broken wrt. 32/64 bit cleanness.
+Who: Patrick McHardy <kaber@trash.net>
+
+---------------------------
firmware_loading_show, firmware_loading_store);
static ssize_t firmware_data_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
char *buffer, loff_t offset, size_t count)
{
struct class_device *class_dev = to_class_dev(kobj);
return count;
}
static ssize_t firmware_data_write(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
char *buffer, loff_t offset, size_t count)
{
struct class_device *class_dev = to_class_dev(kobj);
'810' and '810E' chipsets)
* Intel 82801BA (ICH2 - part of the '815E' chipset)
* Intel 82801CA/CAM (ICH3)
- * Intel 82801DB (ICH4) (HW PEC supported, 32 byte buffer not supported)
- * Intel 82801EB/ER (ICH5) (HW PEC supported, 32 byte buffer not supported)
+ * Intel 82801DB (ICH4) (HW PEC supported)
+ * Intel 82801EB/ER (ICH5) (HW PEC supported)
* Intel 6300ESB
* Intel 82801FB/FR/FW/FRW (ICH6)
* Intel 82801G (ICH7)
Datasheet: Publicly available at the Intel website
* ServerWorks OSB4, CSB5, CSB6 and HT-1000 southbridges
Datasheet: Only available via NDA from ServerWorks
- * ATI IXP200, IXP300, IXP400 and SB600 southbridges
+ * ATI IXP200, IXP300, IXP400, SB600 and SB700 southbridges
Datasheet: Not publicly available
* Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
Datasheet: Publicly available at the SMSC website http://www.smsc.com
--- /dev/null
+Kernel driver i2c-taos-evm
+
+Author: Jean Delvare <khali@linux-fr.org>
+
+This is a driver for the evaluation modules for TAOS I2C/SMBus chips.
+The modules include an SMBus master with limited capabilities, which can
+be controlled over the serial port. Virtually all evaluation modules
+are supported, but a few lines of code need to be added for each new
+module to instantiate the right I2C chip on the bus. Obviously, a driver
+for the chip in question is also needed.
+
+Currently supported devices are:
+
+* TAOS TSL2550 EVM
+
+For addtional information on TAOS products, please see
+ http://www.taosinc.com/
+
+
+Using this driver
+-----------------
+
+In order to use this driver, you'll need the serport driver, and the
+inputattach tool, which is part of the input-utils package. The following
+commands will tell the kernel that you have a TAOS EVM on the first
+serial port:
+
+# modprobe serport
+# inputattach --taos-evm /dev/ttyS0
+
+
+Technical details
+-----------------
+
+Only 4 SMBus transaction types are supported by the TAOS evaluation
+modules:
+* Receive Byte
+* Send Byte
+* Read Byte
+* Write Byte
+
+The communication protocol is text-based and pretty simple. It is
+described in a PDF document on the CD which comes with the evaluation
+module. The communication is rather slow, because the serial port has
+to operate at 1200 bps. However, I don't think this is a big concern in
+practice, as these modules are meant for evaluation and testing only.
or
- count = i2c_smbus_read_i2c_block_data(fd, 0x84, buffer);
+ count = i2c_smbus_read_i2c_block_data(fd, 0x84, 16, buffer);
The block read should read 16 bytes.
0x84 is the block read command.
+++ /dev/null
-Kernel driver x1205
-===================
-
-Supported chips:
- * Xicor X1205 RTC
- Prefix: 'x1205'
- Addresses scanned: none
- Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
-
-Authors:
- Karen Spearel <kas11@tampabay.rr.com>,
- Alessandro Zummo <a.zummo@towertech.it>
-
-Description
------------
-
-This module aims to provide complete access to the Xicor X1205 RTC.
-Recently Xicor has merged with Intersil, but the chip is
-still sold under the Xicor brand.
-
-This chip is located at address 0x6f and uses a 2-byte register addressing.
-Two bytes need to be written to read a single register, while most
-other chips just require one and take the second one as the data
-to be written. To prevent corrupting unknown chips, the user must
-explicitely set the probe parameter.
-
-example:
-
-modprobe x1205 probe=0,0x6f
-
-The module supports one more option, hctosys, which is used to set the
-software clock from the x1205. On systems where the x1205 is the
-only hardware rtc, this parameter could be used to achieve a correct
-date/time earlier in the system boot sequence.
-
-example:
-
-modprobe x1205 probe=0,0x6f hctosys=1
Algorithm drivers
-----------------
-i2c-algo-8xx: An algorithm for CPM's I2C device in Motorola 8xx processors (NOT BUILT BY DEFAULT)
i2c-algo-bit: A bit-banging algorithm
i2c-algo-pcf: A PCF 8584 style algorithm
i2c-algo-ibm_ocp: An algorithm for the I2C device in IBM 4xx processors (NOT BUILT BY DEFAULT)
i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit)
i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT)
i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit)
-i2c-rpx: RPX board Motorola 8xx I2C device (uses i2c-algo-8xx) (NOT BUILT BY DEFAULT)
i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit)
u8 command, u8 length,
u8 *values);
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
- u8 command, u8 *values);
+ u8 command, u8 length, u8 *values);
These ones were removed in Linux 2.6.10 because they had no users, but could
be added back later if needed:
0x1d0 unsigned long EFI memory descriptor map pointer
0x1d4 unsigned long EFI memory descriptor map size
0x1e0 unsigned long ALT_MEM_K, alternative mem check, in Kb
+0x1e4 unsigned long Scratch field for the kernel setup code
0x1e8 char number of entries in E820MAP (below)
0x1e9 unsigned char number of entries in EDDBUF (below)
0x1ea unsigned char number of entries in EDD_MBR_SIG_BUFFER (below)
#include <sys/mman.h>
#include <sys/stat.h>
#include <unistd.h>
+#include <linux/pci.h>
int sum;
return -1;
}
+ if (fnmatch("/proc/bus/pci/*", path, 0) == 0) {
+ rc = ioctl(fd, PCIIOC_MMAP_IS_MEM);
+ if (rc == -1)
+ perror("PCIIOC_MMAP_IS_MEM ioctl");
+ }
+
addr = mmap(NULL, length, PROT_READ|PROT_WRITE, MAP_SHARED, fd, offset);
if (addr == MAP_FAILED)
return 1;
if (touch) {
c = (int *) addr;
- while (c < (int *) (offset + length))
+ while (c < (int *) (addr + length))
sum += *c++;
}
return 0;
}
-int scan_sysfs(char *path, char *file, off_t offset, size_t length, int touch)
+int scan_tree(char *path, char *file, off_t offset, size_t length, int touch)
{
struct dirent **namelist;
char *name, *path2;
} else {
r = lstat(path2, &buf);
if (r == 0 && S_ISDIR(buf.st_mode)) {
- rc = scan_sysfs(path2, file, offset, length, touch);
+ rc = scan_tree(path2, file, offset, length, touch);
if (rc < 0)
return rc;
}
else
fprintf(stderr, "FAIL: /dev/mem 0x0-0x100000 not accessible\n");
- scan_sysfs("/sys/class/pci_bus", "legacy_mem", 0, 0xA0000, 1);
- scan_sysfs("/sys/class/pci_bus", "legacy_mem", 0xA0000, 0x20000, 0);
- scan_sysfs("/sys/class/pci_bus", "legacy_mem", 0xC0000, 0x40000, 1);
- scan_sysfs("/sys/class/pci_bus", "legacy_mem", 0, 1024*1024, 0);
+ scan_tree("/sys/class/pci_bus", "legacy_mem", 0, 0xA0000, 1);
+ scan_tree("/sys/class/pci_bus", "legacy_mem", 0xA0000, 0x20000, 0);
+ scan_tree("/sys/class/pci_bus", "legacy_mem", 0xC0000, 0x40000, 1);
+ scan_tree("/sys/class/pci_bus", "legacy_mem", 0, 1024*1024, 0);
scan_rom("/sys/devices", "rom");
+
+ scan_tree("/proc/bus/pci", "??.?", 0, 0xA0000, 1);
+ scan_tree("/proc/bus/pci", "??.?", 0xA0000, 0x20000, 0);
+ scan_tree("/proc/bus/pci", "??.?", 0xC0000, 0x40000, 1);
+ scan_tree("/proc/bus/pci", "??.?", 0, 1024*1024, 0);
}
The /dev/mem mmap constraints apply.
+ mmap of /proc/bus/pci/.../??.?
+
+ This is an MMIO mmap of PCI functions, which additionally may or
+ may not be requested as using the WC attribute.
+
+ If WC is requested, and the region in kern_memmap is either WC
+ or UC, and the EFI memory map designates the region as WC, then
+ the WC mapping is allowed.
+
+ Otherwise, the user mapping must use the same attribute as the
+ kernel mapping.
+
read/write of /dev/mem
This uses copy_from_user(), which implicitly uses a kernel
accept_source_route - INTEGER
Accept source routing (routing extension header).
- > 0: Accept routing header.
- = 0: Accept only routing header type 2.
+ >= 0: Accept only routing header type 2.
< 0: Do not accept routing header.
Default: 0
--- /dev/null
+This brief document describes how to use the kernel's PPPoL2TP driver
+to provide L2TP functionality. L2TP is a protocol that tunnels one or
+more PPP sessions over a UDP tunnel. It is commonly used for VPNs
+(L2TP/IPSec) and by ISPs to tunnel subscriber PPP sessions over an IP
+network infrastructure.
+
+Design
+======
+
+The PPPoL2TP driver, drivers/net/pppol2tp.c, provides a mechanism by
+which PPP frames carried through an L2TP session are passed through
+the kernel's PPP subsystem. The standard PPP daemon, pppd, handles all
+PPP interaction with the peer. PPP network interfaces are created for
+each local PPP endpoint.
+
+The L2TP protocol http://www.faqs.org/rfcs/rfc2661.html defines L2TP
+control and data frames. L2TP control frames carry messages between
+L2TP clients/servers and are used to setup / teardown tunnels and
+sessions. An L2TP client or server is implemented in userspace and
+will use a regular UDP socket per tunnel. L2TP data frames carry PPP
+frames, which may be PPP control or PPP data. The kernel's PPP
+subsystem arranges for PPP control frames to be delivered to pppd,
+while data frames are forwarded as usual.
+
+Each tunnel and session within a tunnel is assigned a unique tunnel_id
+and session_id. These ids are carried in the L2TP header of every
+control and data packet. The pppol2tp driver uses them to lookup
+internal tunnel and/or session contexts. Zero tunnel / session ids are
+treated specially - zero ids are never assigned to tunnels or sessions
+in the network. In the driver, the tunnel context keeps a pointer to
+the tunnel UDP socket. The session context keeps a pointer to the
+PPPoL2TP socket, as well as other data that lets the driver interface
+to the kernel PPP subsystem.
+
+Note that the pppol2tp kernel driver handles only L2TP data frames;
+L2TP control frames are simply passed up to userspace in the UDP
+tunnel socket. The kernel handles all datapath aspects of the
+protocol, including data packet resequencing (if enabled).
+
+There are a number of requirements on the userspace L2TP daemon in
+order to use the pppol2tp driver.
+
+1. Use a UDP socket per tunnel.
+
+2. Create a single PPPoL2TP socket per tunnel bound to a special null
+ session id. This is used only for communicating with the driver but
+ must remain open while the tunnel is active. Opening this tunnel
+ management socket causes the driver to mark the tunnel socket as an
+ L2TP UDP encapsulation socket and flags it for use by the
+ referenced tunnel id. This hooks up the UDP receive path via
+ udp_encap_rcv() in net/ipv4/udp.c. PPP data frames are never passed
+ in this special PPPoX socket.
+
+3. Create a PPPoL2TP socket per L2TP session. This is typically done
+ by starting pppd with the pppol2tp plugin and appropriate
+ arguments. A PPPoL2TP tunnel management socket (Step 2) must be
+ created before the first PPPoL2TP session socket is created.
+
+When creating PPPoL2TP sockets, the application provides information
+to the driver about the socket in a socket connect() call. Source and
+destination tunnel and session ids are provided, as well as the file
+descriptor of a UDP socket. See struct pppol2tp_addr in
+include/linux/if_ppp.h. Note that zero tunnel / session ids are
+treated specially. When creating the per-tunnel PPPoL2TP management
+socket in Step 2 above, zero source and destination session ids are
+specified, which tells the driver to prepare the supplied UDP file
+descriptor for use as an L2TP tunnel socket.
+
+Userspace may control behavior of the tunnel or session using
+setsockopt and ioctl on the PPPoX socket. The following socket
+options are supported:-
+
+DEBUG - bitmask of debug message categories. See below.
+SENDSEQ - 0 => don't send packets with sequence numbers
+ 1 => send packets with sequence numbers
+RECVSEQ - 0 => receive packet sequence numbers are optional
+ 1 => drop receive packets without sequence numbers
+LNSMODE - 0 => act as LAC.
+ 1 => act as LNS.
+REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder.
+
+Only the DEBUG option is supported by the special tunnel management
+PPPoX socket.
+
+In addition to the standard PPP ioctls, a PPPIOCGL2TPSTATS is provided
+to retrieve tunnel and session statistics from the kernel using the
+PPPoX socket of the appropriate tunnel or session.
+
+Debugging
+=========
+
+The driver supports a flexible debug scheme where kernel trace
+messages may be optionally enabled per tunnel and per session. Care is
+needed when debugging a live system since the messages are not
+rate-limited and a busy system could be swamped. Userspace uses
+setsockopt on the PPPoX socket to set a debug mask.
+
+The following debug mask bits are available:
+
+PPPOL2TP_MSG_DEBUG verbose debug (if compiled in)
+PPPOL2TP_MSG_CONTROL userspace - kernel interface
+PPPOL2TP_MSG_SEQ sequence numbers handling
+PPPOL2TP_MSG_DATA data packets
+
+Sample Userspace Code
+=====================
+
+1. Create tunnel management PPPoX socket
+
+ kernel_fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
+ if (kernel_fd >= 0) {
+ struct sockaddr_pppol2tp sax;
+ struct sockaddr_in const *peer_addr;
+
+ peer_addr = l2tp_tunnel_get_peer_addr(tunnel);
+ memset(&sax, 0, sizeof(sax));
+ sax.sa_family = AF_PPPOX;
+ sax.sa_protocol = PX_PROTO_OL2TP;
+ sax.pppol2tp.fd = udp_fd; /* fd of tunnel UDP socket */
+ sax.pppol2tp.addr.sin_addr.s_addr = peer_addr->sin_addr.s_addr;
+ sax.pppol2tp.addr.sin_port = peer_addr->sin_port;
+ sax.pppol2tp.addr.sin_family = AF_INET;
+ sax.pppol2tp.s_tunnel = tunnel_id;
+ sax.pppol2tp.s_session = 0; /* special case: mgmt socket */
+ sax.pppol2tp.d_tunnel = 0;
+ sax.pppol2tp.d_session = 0; /* special case: mgmt socket */
+
+ if(connect(kernel_fd, (struct sockaddr *)&sax, sizeof(sax) ) < 0 ) {
+ perror("connect failed");
+ result = -errno;
+ goto err;
+ }
+ }
+
+2. Create session PPPoX data socket
+
+ struct sockaddr_pppol2tp sax;
+ int fd;
+
+ /* Note, the target socket must be bound already, else it will not be ready */
+ sax.sa_family = AF_PPPOX;
+ sax.sa_protocol = PX_PROTO_OL2TP;
+ sax.pppol2tp.fd = tunnel_fd;
+ sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr;
+ sax.pppol2tp.addr.sin_port = addr->sin_port;
+ sax.pppol2tp.addr.sin_family = AF_INET;
+ sax.pppol2tp.s_tunnel = tunnel_id;
+ sax.pppol2tp.s_session = session_id;
+ sax.pppol2tp.d_tunnel = peer_tunnel_id;
+ sax.pppol2tp.d_session = peer_session_id;
+
+ /* session_fd is the fd of the session's PPPoL2TP socket.
+ * tunnel_fd is the fd of the tunnel UDP socket.
+ */
+ fd = connect(session_fd, (struct sockaddr *)&sax, sizeof(sax));
+ if (fd < 0 ) {
+ return -errno;
+ }
+ return 0;
+
+Miscellanous
+============
+
+The PPPoL2TP driver was developed as part of the OpenL2TP project by
+Katalix Systems Ltd. OpenL2TP is a full-featured L2TP client / server,
+designed from the ground up to have the L2TP datapath in the
+kernel. The project also implemented the pppol2tp plugin for pppd
+which allows pppd to use the kernel driver. Details can be found at
+http://openl2tp.sourceforge.net.
--- /dev/null
+
+ HOWTO for multiqueue network device support
+ ===========================================
+
+Section 1: Base driver requirements for implementing multiqueue support
+Section 2: Qdisc support for multiqueue devices
+Section 3: Brief howto using PRIO or RR for multiqueue devices
+
+
+Intro: Kernel support for multiqueue devices
+---------------------------------------------------------
+
+Kernel support for multiqueue devices is only an API that is presented to the
+netdevice layer for base drivers to implement. This feature is part of the
+core networking stack, and all network devices will be running on the
+multiqueue-aware stack. If a base driver only has one queue, then these
+changes are transparent to that driver.
+
+
+Section 1: Base driver requirements for implementing multiqueue support
+-----------------------------------------------------------------------
+
+Base drivers are required to use the new alloc_etherdev_mq() or
+alloc_netdev_mq() functions to allocate the subqueues for the device. The
+underlying kernel API will take care of the allocation and deallocation of
+the subqueue memory, as well as netdev configuration of where the queues
+exist in memory.
+
+The base driver will also need to manage the queues as it does the global
+netdev->queue_lock today. Therefore base drivers should use the
+netif_{start|stop|wake}_subqueue() functions to manage each queue while the
+device is still operational. netdev->queue_lock is still used when the device
+comes online or when it's completely shut down (unregister_netdev(), etc.).
+
+Finally, the base driver should indicate that it is a multiqueue device. The
+feature flag NETIF_F_MULTI_QUEUE should be added to the netdev->features
+bitmap on device initialization. Below is an example from e1000:
+
+#ifdef CONFIG_E1000_MQ
+ if ( (adapter->hw.mac.type == e1000_82571) ||
+ (adapter->hw.mac.type == e1000_82572) ||
+ (adapter->hw.mac.type == e1000_80003es2lan))
+ netdev->features |= NETIF_F_MULTI_QUEUE;
+#endif
+
+
+Section 2: Qdisc support for multiqueue devices
+-----------------------------------------------
+
+Currently two qdiscs support multiqueue devices. A new round-robin qdisc,
+sch_rr, and sch_prio. The qdisc is responsible for classifying the skb's to
+bands and queues, and will store the queue mapping into skb->queue_mapping.
+Use this field in the base driver to determine which queue to send the skb
+to.
+
+sch_rr has been added for hardware that doesn't want scheduling policies from
+software, so it's a straight round-robin qdisc. It uses the same syntax and
+classification priomap that sch_prio uses, so it should be intuitive to
+configure for people who've used sch_prio.
+
+The PRIO qdisc naturally plugs into a multiqueue device. If PRIO has been
+built with NET_SCH_PRIO_MQ, then upon load, it will make sure the number of
+bands requested is equal to the number of queues on the hardware. If they
+are equal, it sets a one-to-one mapping up between the queues and bands. If
+they're not equal, it will not load the qdisc. This is the same behavior
+for RR. Once the association is made, any skb that is classified will have
+skb->queue_mapping set, which will allow the driver to properly queue skb's
+to multiple queues.
+
+
+Section 3: Brief howto using PRIO and RR for multiqueue devices
+---------------------------------------------------------------
+
+The userspace command 'tc,' part of the iproute2 package, is used to configure
+qdiscs. To add the PRIO qdisc to your network device, assuming the device is
+called eth0, run the following command:
+
+# tc qdisc add dev eth0 root handle 1: prio bands 4 multiqueue
+
+This will create 4 bands, 0 being highest priority, and associate those bands
+to the queues on your NIC. Assuming eth0 has 4 Tx queues, the band mapping
+would look like:
+
+band 0 => queue 0
+band 1 => queue 1
+band 2 => queue 2
+band 3 => queue 3
+
+Traffic will begin flowing through each queue if your TOS values are assigning
+traffic across the various bands. For example, ssh traffic will always try to
+go out band 0 based on TOS -> Linux priority conversion (realtime traffic),
+so it will be sent out queue 0. ICMP traffic (pings) fall into the "normal"
+traffic classification, which is band 1. Therefore pings will be send out
+queue 1 on the NIC.
+
+Note the use of the multiqueue keyword. This is only in versions of iproute2
+that support multiqueue networking devices; if this is omitted when loading
+a qdisc onto a multiqueue device, the qdisc will load and operate the same
+if it were loaded onto a single-queue device (i.e. - sends all traffic to
+queue 0).
+
+Another alternative to multiqueue band allocation can be done by using the
+multiqueue option and specify 0 bands. If this is the case, the qdisc will
+allocate the number of bands to equal the number of queues that the device
+reports, and bring the qdisc online.
+
+The behavior of tc filters remains the same, where it will override TOS priority
+classification.
+
+
+Author: Peter P. Waskiewicz Jr. <peter.p.waskiewicz.jr@intel.com>
separately allocated data is attached to the network device
(dev->priv) then it is up to the module exit handler to free that.
+MTU
+===
+Each network device has a Maximum Transfer Unit. The MTU does not
+include any link layer protocol overhead. Upper layer protocols must
+not pass a socket buffer (skb) to a device to transmit with more data
+than the mtu. The MTU does not include link layer header overhead, so
+for example on Ethernet if the standard MTU is 1500 bytes used, the
+actual skb will contain up to 1514 bytes because of the Ethernet
+header. Devices should allow for the 4 byte VLAN header as well.
+
+Segmentation Offload (GSO, TSO) is an exception to this rule. The
+upper layer protocol may pass a large socket buffer to the device
+transmit routine, and the device will break that up into separate
+packets based on the current MTU.
+
+MTU is symmetrical and applies both to receive and transmit. A device
+must be able to receive at least the maximum size packet allowed by
+the MTU. A network device may use the MTU as mechanism to size receive
+buffers, but the device should allow packets with VLAN header. With
+standard Ethernet mtu of 1500 bytes, the device should allow up to
+1518 byte packets (1500 + 14 header + 4 tag). The device may either:
+drop, truncate, or pass up oversize packets, but dropping oversize
+packets is preferred.
+
struct net_device synchronization rules
=======================================
dev->hard_start_xmit:
Synchronization: netif_tx_lock spinlock.
+
When the driver sets NETIF_F_LLTX in dev->features this will be
called without holding netif_tx_lock. In this case the driver
has to lock by itself when needed. It is recommended to use a try lock
- for this and return -1 when the spin lock fails.
+ for this and return NETDEV_TX_LOCKED when the spin lock fails.
The locking there should also properly protect against
- set_multicast_list
- Context: Process with BHs disabled or BH (timer).
- Notes: netif_queue_stopped() is guaranteed false
- Interrupts must be enabled when calling hard_start_xmit.
- (Interrupts must also be enabled when enabling the BH handler.)
+ set_multicast_list.
+
+ Context: Process with BHs disabled or BH (timer),
+ will be called with interrupts disabled by netconsole.
+
Return codes:
o NETDEV_TX_OK everything ok.
o NETDEV_TX_BUSY Cannot transmit packet, try later
Synchronization: __LINK_STATE_RX_SCHED bit in dev->state. See
dev_close code and comments in net/core/dev.c for more info.
Context: softirq
+ will be called with interrupts disabled by netconsole.
(Please see Documentation/power/pci.txt for descriptions
of PCI Power Management and the related functions.)
- enable_wake Enable device to generate wake events from a low power
- state.
-
shutdown Hook into reboot_notifier_list (kernel/sys.c).
Intended to stop any idling DMA operations.
Useful for enabling wake-on-lan (NIC) or changing
call pci_set_mwi(). This enables the PCI_COMMAND bit for Mem-Wr-Inval
and also ensures that the cache line size register is set correctly.
Check the return value of pci_set_mwi() as not all architectures
-or chip-sets may support Memory-Write-Invalidate.
+or chip-sets may support Memory-Write-Invalidate. Alternatively,
+if Mem-Wr-Inval would be nice to have but is not required, call
+pci_try_set_mwi() to have the system do its best effort at enabling
+Mem-Wr-Inval.
3.2 Request MMIO/IOP resources
int (*suspend) (struct pci_dev *dev, pm_message_t state);
int (*resume) (struct pci_dev *dev);
- int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable);
suspend
this function, except for PM-capable devices when pci_set_power_state is used.
-enable_wake
------------
-
-Usage:
-
-if (dev->driver && dev->driver->enable_wake)
- dev->driver->enable_wake(dev,state,enable);
-
-This callback is generally only relevant for devices that support the PCI PM
-spec and have the ability to generate a PME# (Power Management Event Signal)
-to wake the system up. (However, it is possible that a device may support
-some non-standard way of generating a wake event on sleep.)
-
-Bits 15:11 of the PMC (Power Mgmt Capabilities) Register in a device's
-PM Capabilities describe what power states the device supports generating a
-wake event from:
-
-+------------------+
-| Bit | State |
-+------------------+
-| 11 | D0 |
-| 12 | D1 |
-| 13 | D2 |
-| 14 | D3hot |
-| 15 | D3cold |
-+------------------+
-
-A device can use this to enable wake events:
-
- pci_enable_wake(dev,state,enable);
-
-Note that to enable PME# from D3cold, a value of 4 should be passed to
-pci_enable_wake (since it uses an index into a bitmask). If a driver gets
-a request to enable wake events from D3, two calls should be made to
-pci_enable_wake (one for both D3hot and D3cold).
-
A reference implementation
-------------------------
--- /dev/null
+Rules on how to access information in the Linux kernel sysfs
+
+The kernel exported sysfs exports internal kernel implementation-details
+and depends on internal kernel structures and layout. It is agreed upon
+by the kernel developers that the Linux kernel does not provide a stable
+internal API. As sysfs is a direct export of kernel internal
+structures, the sysfs interface can not provide a stable interface eighter,
+it may always change along with internal kernel changes.
+
+To minimize the risk of breaking users of sysfs, which are in most cases
+low-level userspace applications, with a new kernel release, the users
+of sysfs must follow some rules to use an as abstract-as-possible way to
+access this filesystem. The current udev and HAL programs already
+implement this and users are encouraged to plug, if possible, into the
+abstractions these programs provide instead of accessing sysfs
+directly.
+
+But if you really do want or need to access sysfs directly, please follow
+the following rules and then your programs should work with future
+versions of the sysfs interface.
+
+- Do not use libsysfs
+ It makes assumptions about sysfs which are not true. Its API does not
+ offer any abstraction, it exposes all the kernel driver-core
+ implementation details in its own API. Therefore it is not better than
+ reading directories and opening the files yourself.
+ Also, it is not actively maintained, in the sense of reflecting the
+ current kernel-development. The goal of providing a stable interface
+ to sysfs has failed, it causes more problems, than it solves. It
+ violates many of the rules in this document.
+
+- sysfs is always at /sys
+ Parsing /proc/mounts is a waste of time. Other mount points are a
+ system configuration bug you should not try to solve. For test cases,
+ possibly support a SYSFS_PATH environment variable to overwrite the
+ applications behavior, but never try to search for sysfs. Never try
+ to mount it, if you are not an early boot script.
+
+- devices are only "devices"
+ There is no such thing like class-, bus-, physical devices,
+ interfaces, and such that you can rely on in userspace. Everything is
+ just simply a "device". Class-, bus-, physical, ... types are just
+ kernel implementation details, which should not be expected by
+ applications that look for devices in sysfs.
+
+ The properties of a device are:
+ o devpath (/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0)
+ - identical to the DEVPATH value in the event sent from the kernel
+ at device creation and removal
+ - the unique key to the device at that point in time
+ - the kernels path to the device-directory without the leading
+ /sys, and always starting with with a slash
+ - all elements of a devpath must be real directories. Symlinks
+ pointing to /sys/devices must always be resolved to their real
+ target, and the target path must be used to access the device.
+ That way the devpath to the device matches the devpath of the
+ kernel used at event time.
+ - using or exposing symlink values as elements in a devpath string
+ is a bug in the application
+
+ o kernel name (sda, tty, 0000:00:1f.2, ...)
+ - a directory name, identical to the last element of the devpath
+ - applications need to handle spaces and characters like '!' in
+ the name
+
+ o subsystem (block, tty, pci, ...)
+ - simple string, never a path or a link
+ - retrieved by reading the "subsystem"-link and using only the
+ last element of the target path
+
+ o driver (tg3, ata_piix, uhci_hcd)
+ - a simple string, which may contain spaces, never a path or a
+ link
+ - it is retrieved by reading the "driver"-link and using only the
+ last element of the target path
+ - devices which do not have "driver"-link, just do not have a
+ driver; copying the driver value in a child device context, is a
+ bug in the application
+
+ o attributes
+ - the files in the device directory or files below a subdirectories
+ of the same device directory
+ - accessing attributes reached by a symlink pointing to another device,
+ like the "device"-link, is a bug in the application
+
+ Everything else is just a kernel driver-core implementation detail,
+ that should not be assumed to be stable across kernel releases.
+
+- Properties of parent devices never belong into a child device.
+ Always look at the parent devices themselves for determining device
+ context properties. If the device 'eth0' or 'sda' does not have a
+ "driver"-link, then this device does not have a driver. Its value is empty.
+ Never copy any property of the parent-device into a child-device. Parent
+ device-properties may change dynamically without any notice to the
+ child device.
+
+- Hierarchy in a single device-tree
+ There is only one valid place in sysfs where hierarchy can be examined
+ and this is below: /sys/devices.
+ It is planned, that all device directories will end up in the tree
+ below this directory.
+
+- Classification by subsystem
+ There are currently three places for classification of devices:
+ /sys/block, /sys/class and /sys/bus. It is planned that these will
+ not contain any device-directories themselves, but only flat lists of
+ symlinks pointing to the unified /sys/devices tree.
+ All three places have completely different rules on how to access
+ device information. It is planned to merge all three
+ classification-directories into one place at /sys/subsystem,
+ following the layout of the bus-directories. All buses and
+ classes, including the converted block-subsystem, will show up
+ there.
+ The devices belonging to a subsystem will create a symlink in the
+ "devices" directory at /sys/subsystem/<name>/devices.
+
+ If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
+ ignored. If it does not exist, you have always to scan all three
+ places, as the kernel is free to move a subsystem from one place to
+ the other, as long as the devices are still reachable by the same
+ subsystem name.
+
+ Assuming /sys/class/<subsystem> and /sys/bus/<subsystem>, or
+ /sys/block and /sys/class/block are not interchangeable, is a bug in
+ the application.
+
+- Block
+ The converted block-subsystem at /sys/class/block, or
+ /sys/subsystem/block will contain the links for disks and partitions
+ at the same level, never in a hierarchy. Assuming the block-subsytem to
+ contain only disks and not partition-devices in the same flat list is
+ a bug in the application.
+
+- "device"-link and <subsystem>:<kernel name>-links
+ Never depend on the "device"-link. The "device"-link is a workaround
+ for the old layout, where class-devices are not created in
+ /sys/devices/ like the bus-devices. If the link-resolving of a
+ device-directory does not end in /sys/devices/, you can use the
+ "device"-link to find the parent devices in /sys/devices/. That is the
+ single valid use of the "device"-link, it must never appear in any
+ path as an element. Assuming the existence of the "device"-link for
+ a device in /sys/devices/ is a bug in the application.
+ Accessing /sys/class/net/eth0/device is a bug in the application.
+
+ Never depend on the class-specific links back to the /sys/class
+ directory. These links are also a workaround for the design mistake
+ that class-devices are not created in /sys/devices. If a device
+ directory does not contain directories for child devices, these links
+ may be used to find the child devices in /sys/class. That is the single
+ valid use of these links, they must never appear in any path as an
+ element. Assuming the existence of these links for devices which are
+ real child device directories in the /sys/devices tree, is a bug in
+ the application.
+
+ It is planned to remove all these links when when all class-device
+ directories live in /sys/devices.
+
+- Position of devices along device chain can change.
+ Never depend on a specific parent device position in the devpath,
+ or the chain of parent devices. The kernel is free to insert devices into
+ the chain. You must always request the parent device you are looking for
+ by its subsystem value. You need to walk up the chain until you find
+ the device that matches the expected subsystem. Depending on a specific
+ position of a parent device, or exposing relative paths, using "../" to
+ access the chain of parents, is a bug in the application.
+
S: Maintained
AGPGART DRIVER
-P: Dave Jones
-M: davej@codemonkey.org.uk
-W: http://www.codemonkey.org.uk/projects/agp/
-T: git kernel.org:/pub/scm/linux/kernel/git/davej/agpgart.git
+P: David Airlie
+M: airlied@linux.ie
+T: git kernel.org:/pub/scm/linux/kernel/git/airlied/drm-2.6.git
S: Maintained
AHA152X SCSI DRIVER
S: Maintained
i386 BOOT CODE
-P: Riley H. Williams
-M: Riley@Williams.Name
+P: H. Peter Anvin
+M: hpa@zytor.com
L: Linux-Kernel@vger.kernel.org
S: Maintained
M: kristen.c.accardi@intel.com
S: Supported
-PCI HOTPLUG COMPAQ DRIVER
-P: Greg Kroah-Hartman
-M: greg@kroah.com
-S: Maintained
-
PCIE HOTPLUG DRIVER
P: Kristen Carlson Accardi
M: kristen.c.accardi@intel.com
M: mostrows@speakeasy.net
S: Maintained
+PPP OVER L2TP
+P: James Chapman
+M: jchapman@katalix.com
+S: Maintained
+
PREEMPTIBLE KERNEL
P: Robert Love
M: rml@tech9.net
bool
default y
+config PCI_SYSCALL
+ def_bool PCI
+
config ALPHA_CORE_AGP
bool
depends on ALPHA_GENERIC || ALPHA_TITAN || ALPHA_MARVEL
p[i] = 0;
}
\f
+/* True if the machine supports DAC addressing, and DEV can
+ make use of it given MASK. */
+static int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
+
/* Map a single buffer of the indicated size for PCI DMA in streaming
mode. The 32-bit PCI bus mastering address to use is returned.
Once the device is given the dma address, the device owns this memory
/* True if the machine supports DAC addressing, and DEV can
make use of it given MASK. */
-int
+static int
pci_dac_dma_supported(struct pci_dev *dev, u64 mask)
{
dma64_addr_t dac_offset = alpha_mv.pci_dac_offset;
return ok;
}
-EXPORT_SYMBOL(pci_dac_dma_supported);
-
-dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page,
- unsigned long offset, int direction)
-{
- return (alpha_mv.pci_dac_offset
- + __pa(page_address(page))
- + (dma64_addr_t) offset);
-}
-EXPORT_SYMBOL(pci_dac_page_to_dma);
-
-struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- unsigned long paddr = (dma_addr & PAGE_MASK) - alpha_mv.pci_dac_offset;
- return virt_to_page(__va(paddr));
-}
-EXPORT_SYMBOL(pci_dac_dma_to_page);
-
-unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-EXPORT_SYMBOL(pci_dac_dma_to_offset);
/* Helper for generic DMA-mapping functions. */
information about which PCI hardware does work under Linux and which
doesn't.
+config PCI_SYSCALL
+ def_bool PCI
+
# Select the host bridge type
config PCI_HOST_VIA82C505
bool
unsigned int irq;
spinlock_t lock;
void __iomem *base;
+#ifdef CONFIG_PM
+ void *saved_state;
+#endif
};
struct locomo_dev_info {
if (!save)
return -ENOMEM;
- dev->dev.power.saved_state = (void *) save;
+ lchip->saved_state = save;
spin_lock_irqsave(&lchip->lock, flags);
struct locomo_save_data *save;
unsigned long r;
unsigned long flags;
-
- save = (struct locomo_save_data *) dev->dev.power.saved_state;
+
+ save = lchip->saved_state;
if (!save)
return 0;
locomo_writel(0x1, lchip->base + LOCOMO_KEYBOARD + LOCOMO_KCMD);
spin_unlock_irqrestore(&lchip->lock, flags);
+
+ lchip->saved_state = NULL;
kfree(save);
return 0;
int irq;
spinlock_t lock;
void __iomem *base;
+#ifdef CONFIG_PM
+ void *saved_state;
+#endif
};
/*
save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
- dev->dev.power.saved_state = save;
+ sachip->saved_state = save;
spin_lock_irqsave(&sachip->lock, flags);
unsigned long flags, id;
void __iomem *base;
- save = (struct sa1111_save_data *)dev->dev.power.saved_state;
+ save = sachip->saved_state;
if (!save)
return 0;
spin_unlock_irqrestore(&sachip->lock, flags);
- dev->dev.power.saved_state = NULL;
+ sachip->saved_state = NULL;
kfree(save);
return 0;
platform_set_drvdata(pdev, NULL);
#ifdef CONFIG_PM
- kfree(pdev->dev.power.saved_state);
- pdev->dev.power.saved_state = NULL;
+ kfree(sachip->saved_state);
+ sachip->saved_state = NULL;
#endif
}
/*
* LDM power management.
*/
+static unsigned int neponset_saved_state;
+
static int neponset_suspend(struct platform_device *dev, pm_message_t state)
{
/*
* Save state.
*/
- if (!dev->dev.power.saved_state)
- dev->dev.power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
- if (!dev->dev.power.saved_state)
- return -ENOMEM;
-
- *(unsigned int *)dev->dev.power.saved_state = NCR_0;
+ neponset_saved_state = NCR_0;
return 0;
}
static int neponset_resume(struct platform_device *dev)
{
- if (dev->dev.power.saved_state) {
- NCR_0 = *(unsigned int *)dev->dev.power.saved_state;
- kfree(dev->dev.power.saved_state);
- dev->dev.power.saved_state = NULL;
- }
+ NCR_0 = neponset_saved_state;
return 0;
}
config IRQCHIP_DEMUX_GPIO
bool
+ depends on (BF53x || BF561 || BF54x)
default y
source "init/Kconfig"
help
BF537 Processor Support.
+config BF542
+ bool "BF542"
+ help
+ BF542 Processor Support.
+
+config BF544
+ bool "BF544"
+ help
+ BF544 Processor Support.
+
+config BF548
+ bool "BF548"
+ help
+ BF548 Processor Support.
+
+config BF549
+ bool "BF549"
+ help
+ BF549 Processor Support.
+
config BF561
bool "BF561"
help
prompt "Silicon Rev"
default BF_REV_0_2 if BF537
default BF_REV_0_3 if BF533
+ default BF_REV_0_0 if BF549
+
+config BF_REV_0_0
+ bool "0.0"
+ depends on (BF549)
config BF_REV_0_2
bool "0.2"
endchoice
+config BF53x
+ bool
+ depends on (BF531 || BF532 || BF533 || BF534 || BF536 || BF537)
+ default y
+
+config BF54x
+ bool
+ depends on (BF542 || BF544 || BF548 || BF549)
+ default y
+
config BFIN_DUAL_CORE
bool
depends on (BF561)
help
CM-BF537 support for EVAL- and DEV-Board.
+config BFIN548_EZKIT
+ bool "BF548-EZKIT"
+ depends on (BF548 || BF549)
+ help
+ BFIN548-EZKIT board Support.
+
config BFIN561_BLUETECHNIX_CM
bool "Bluetechnix CM-BF561"
depends on (BF561)
source "arch/blackfin/mach-bf533/Kconfig"
source "arch/blackfin/mach-bf561/Kconfig"
source "arch/blackfin/mach-bf537/Kconfig"
+source "arch/blackfin/mach-bf548/Kconfig"
menu "Board customizations"
config CACHELINE_ALIGNED_L1
bool "Locate cacheline_aligned data to L1 Data Memory"
- default y
+ default y if !BF54x
+ default n if BF54x
depends on !BF531
help
If enabled cacheline_anligned data is linked
source "mm/Kconfig"
+config LARGE_ALLOCS
+ bool "Allow allocating large blocks (> 1MB) of memory"
+ help
+ Allow the slab memory allocator to keep chains for very large
+ memory sizes - upto 32MB. You may need this if your system has
+ a lot of RAM, and you need to able to allocate very large
+ contiguous chunks. If unsure, say N.
+
config BFIN_DMA_5XX
bool "Enable DMA Support"
- depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561)
+ depends on (BF533 || BF532 || BF531 || BF537 || BF536 || BF534 || BF561 || BF54x)
default y
help
DMA driver for BF5xx.
config C_CDPRIO
bool "DMA has priority over core for ext. accesses"
+ depends on !BF54x
default n
config C_B0PEN
endmenu
-if (BF537 || BF533)
+if (BF537 || BF533 || BF54x)
menu "CPU Frequency scaling"
machine-$(CONFIG_BF534) := bf537
machine-$(CONFIG_BF536) := bf537
machine-$(CONFIG_BF537) := bf537
+machine-$(CONFIG_BF548) := bf548
+machine-$(CONFIG_BF549) := bf548
machine-$(CONFIG_BF561) := bf561
MACHINE := $(machine-y)
export MACHINE
quiet_cmd_uimage = UIMAGE $@
cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(ARCH) -O linux -T kernel \
- -C gzip -a $(CONFIG_BOOT_LOAD) -e $(CONFIG_BOOT_LOAD) -n 'Linux-$(KERNELRELEASE)' \
+ -C gzip -n 'Linux-$(KERNELRELEASE)' -a $(CONFIG_BOOT_LOAD) \
+ -e $(shell $(NM) vmlinux | awk '$$NF == "__start" {print $$1}') \
-d $< $@
$(obj)/vmlinux.bin: vmlinux FORCE
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.21.5
+#
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
+CONFIG_BLACKFIN=y
+CONFIG_ZONE_DMA=y
+CONFIG_BFIN=y
+CONFIG_SEMAPHORE_SLEEPERS=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_FORCE_MAX_ZONEORDER=14
+CONFIG_IRQCHIP_DEMUX_GPIO=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
+# CONFIG_RELAY is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
+# CONFIG_NP2 is not set
+CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_SLOB is not set
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# Block layer
+#
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_PREEMPT_NONE is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+# CONFIG_PREEMPT is not set
+
+#
+# Blackfin Processor Options
+#
+
+#
+# Processor and Board Settings
+#
+# CONFIG_BF531 is not set
+# CONFIG_BF532 is not set
+# CONFIG_BF533 is not set
+# CONFIG_BF534 is not set
+# CONFIG_BF536 is not set
+# CONFIG_BF537 is not set
+# CONFIG_BF542 is not set
+# CONFIG_BF544 is not set
+# CONFIG_BF548 is not set
+CONFIG_BF549=y
+# CONFIG_BF561 is not set
+CONFIG_BF_REV_0_0=y
+# CONFIG_BF_REV_0_2 is not set
+# CONFIG_BF_REV_0_3 is not set
+# CONFIG_BF_REV_0_4 is not set
+# CONFIG_BF_REV_0_5 is not set
+# CONFIG_BF_REV_ANY is not set
+# CONFIG_BF_REV_NONE is not set
+CONFIG_BF54x=y
+CONFIG_BFIN_SINGLE_CORE=y
+# CONFIG_BFIN533_EZKIT is not set
+# CONFIG_BFIN533_STAMP is not set
+# CONFIG_BFIN537_STAMP is not set
+# CONFIG_BFIN533_BLUETECHNIX_CM is not set
+# CONFIG_BFIN537_BLUETECHNIX_CM is not set
+CONFIG_BFIN548_EZKIT=y
+# CONFIG_BFIN561_BLUETECHNIX_CM is not set
+# CONFIG_BFIN561_EZKIT is not set
+# CONFIG_BFIN561_TEPLA is not set
+# CONFIG_PNAV10 is not set
+# CONFIG_GENERIC_BOARD is not set
+CONFIG_IRQ_PLL_WAKEUP=7
+CONFIG_IRQ_TIMER0=11
+CONFIG_IRQ_TIMER1=11
+CONFIG_IRQ_TIMER2=11
+CONFIG_IRQ_TIMER3=11
+CONFIG_IRQ_TIMER4=11
+CONFIG_IRQ_TIMER5=11
+CONFIG_IRQ_TIMER6=11
+CONFIG_IRQ_TIMER7=11
+CONFIG_IRQ_TIMER8=11
+CONFIG_IRQ_TIMER9=11
+CONFIG_IRQ_TIMER10=11
+CONFIG_IRQ_RTC=8
+CONFIG_IRQ_SPORT0_RX=9
+CONFIG_IRQ_SPORT0_TX=9
+CONFIG_IRQ_SPORT1_RX=9
+CONFIG_IRQ_SPORT1_TX=9
+CONFIG_IRQ_UART0_RX=10
+CONFIG_IRQ_UART0_TX=10
+CONFIG_IRQ_UART1_RX=10
+CONFIG_IRQ_UART1_TX=10
+
+#
+# BF548 Specific Configuration
+#
+
+#
+# Interrupt Priority Assignment
+#
+
+#
+# Priority
+#
+CONFIG_IRQ_DMAC0_ERR=7
+CONFIG_IRQ_EPPI0_ERR=7
+CONFIG_IRQ_SPORT0_ERR=7
+CONFIG_IRQ_SPORT1_ERR=7
+CONFIG_IRQ_SPI0_ERR=7
+CONFIG_IRQ_UART0_ERR=7
+CONFIG_IRQ_EPPI0=8
+CONFIG_IRQ_SPI0=10
+CONFIG_IRQ_PINT0=12
+CONFIG_IRQ_PINT1=12
+CONFIG_IRQ_MDMAS0=13
+CONFIG_IRQ_MDMAS1=13
+CONFIG_IRQ_WATCHDOG=13
+CONFIG_IRQ_DMAC1_ERR=7
+CONFIG_IRQ_SPORT2_ERR=7
+CONFIG_IRQ_SPORT3_ERR=7
+CONFIG_IRQ_MXVR_DATA=7
+CONFIG_IRQ_SPI1_ERR=7
+CONFIG_IRQ_SPI2_ERR=7
+CONFIG_IRQ_UART1_ERR=7
+CONFIG_IRQ_UART2_ERR=7
+CONFIG_IRQ_CAN0_ERR=7
+CONFIG_IRQ_SPORT2_RX=9
+CONFIG_IRQ_SPORT2_TX=9
+CONFIG_IRQ_SPORT3_RX=9
+CONFIG_IRQ_SPORT3_TX=9
+CONFIG_IRQ_EPPI1=9
+CONFIG_IRQ_EPPI2=9
+CONFIG_IRQ_SPI1=10
+CONFIG_IRQ_SPI2=10
+CONFIG_IRQ_ATAPI_RX=10
+CONFIG_IRQ_ATAPI_TX=10
+CONFIG_IRQ_TWI0=11
+CONFIG_IRQ_TWI1=11
+CONFIG_IRQ_CAN0_RX=11
+CONFIG_IRQ_CAN0_TX=11
+CONFIG_IRQ_MDMAS2=13
+CONFIG_IRQ_MDMAS3=13
+CONFIG_IRQ_MXVR_ERR=11
+CONFIG_IRQ_MXVR_MSG=11
+CONFIG_IRQ_MXVR_PKT=11
+CONFIG_IRQ_EPPI1_ERR=7
+CONFIG_IRQ_EPPI2_ERR=7
+CONFIG_IRQ_UART3_ERR=7
+CONFIG_IRQ_HOST_ERR=7
+CONFIG_IRQ_PIXC_ERR=7
+CONFIG_IRQ_NFC_ERR=7
+CONFIG_IRQ_ATAPI_ERR=7
+CONFIG_IRQ_CAN1_ERR=7
+CONFIG_IRQ_HS_DMA_ERR=7
+CONFIG_IRQ_PIXC_IN0=8
+CONFIG_IRQ_PIXC_IN1=8
+CONFIG_IRQ_PIXC_OUT=8
+CONFIG_IRQ_SDH=8
+CONFIG_IRQ_CNT=8
+CONFIG_IRQ_KEY=8
+CONFIG_IRQ_CAN1_RX=11
+CONFIG_IRQ_CAN1_TX=11
+CONFIG_IRQ_SDH_MASK0=11
+CONFIG_IRQ_SDH_MASK1=11
+CONFIG_IRQ_USB_INT0=11
+CONFIG_IRQ_USB_INT1=11
+CONFIG_IRQ_USB_INT2=11
+CONFIG_IRQ_USB_DMA=11
+CONFIG_IRQ_OTPSEC=11
+CONFIG_IRQ_PINT2=11
+CONFIG_IRQ_PINT3=11
+
+#
+# Board customizations
+#
+# CONFIG_CMDLINE_BOOL is not set
+
+#
+# Board Setup
+#
+CONFIG_CLKIN_HZ=25000000
+CONFIG_MEM_SIZE=64
+CONFIG_MEM_ADD_WIDTH=10
+CONFIG_BOOT_LOAD=0x1000
+
+#
+# Blackfin Kernel Optimizations
+#
+
+#
+# Timer Tick
+#
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+
+#
+# Memory Optimizations
+#
+CONFIG_I_ENTRY_L1=y
+CONFIG_EXCPT_IRQ_SYSC_L1=y
+CONFIG_DO_IRQ_L1=y
+CONFIG_CORE_TIMER_IRQ_L1=y
+CONFIG_IDLE_L1=y
+CONFIG_SCHEDULE_L1=y
+CONFIG_ARITHMETIC_OPS_L1=y
+CONFIG_ACCESS_OK_L1=y
+CONFIG_MEMSET_L1=y
+CONFIG_MEMCPY_L1=y
+CONFIG_SYS_BFIN_SPINLOCK_L1=y
+# CONFIG_IP_CHECKSUM_L1 is not set
+CONFIG_CACHELINE_ALIGNED_L1=y
+# CONFIG_SYSCALL_TAB_L1 is not set
+# CONFIG_CPLB_SWITCH_TAB_L1 is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_LARGE_ALLOCS=y
+CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_2M is not set
+CONFIG_DMA_UNCACHED_1M=y
+# CONFIG_DMA_UNCACHED_NONE is not set
+
+#
+# Cache Support
+#
+CONFIG_BLKFIN_CACHE=y
+CONFIG_BLKFIN_DCACHE=y
+# CONFIG_BLKFIN_DCACHE_BANKA is not set
+# CONFIG_BLKFIN_CACHE_LOCK is not set
+# CONFIG_BLKFIN_WB is not set
+CONFIG_BLKFIN_WT=y
+CONFIG_L1_MAX_PIECE=16
+
+#
+# Clock Settings
+#
+# CONFIG_BFIN_KERNEL_CLOCK is not set
+
+#
+# Asynchonous Memory Configuration
+#
+
+#
+# EBIU_AMBCTL Global Control
+#
+CONFIG_C_AMCKEN=y
+CONFIG_C_CDPRIO=y
+# CONFIG_C_AMBEN is not set
+# CONFIG_C_AMBEN_B0 is not set
+# CONFIG_C_AMBEN_B0_B1 is not set
+# CONFIG_C_AMBEN_B0_B1_B2 is not set
+CONFIG_C_AMBEN_ALL=y
+
+#
+# EBIU_AMBCTL Control
+#
+CONFIG_BANK_0=0x7BB0
+CONFIG_BANK_1=0x7BB0
+CONFIG_BANK_2=0x7BB0
+CONFIG_BANK_3=0x99B3
+
+#
+# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
+#
+# CONFIG_PCI is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_ELF_FDPIC=y
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_NETDEBUG is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+
+#
+# TIPC Configuration (EXPERIMENTAL)
+#
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+
+#
+# QoS and/or fair queueing
+#
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+# CONFIG_MTD_CHAR is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_BF5xx is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+# CONFIG_MTD_NAND is not set
+
+#
+# OneNAND Flash Device Drivers
+#
+# CONFIG_MTD_ONENAND is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+# CONFIG_PNPACPI is not set
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# Misc devices
+#
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+# CONFIG_MD is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_SMC91X is not set
+# CONFIG_SMSC911X is not set
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Telephony Support
+#
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_BF53X_PFBUTTONS is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_AD9960 is not set
+# CONFIG_SPI_ADC_BF533 is not set
+# CONFIG_BF5xx_PFLAGS is not set
+# CONFIG_BF5xx_PPIFCD is not set
+# CONFIG_BF5xx_TIMERS is not set
+# CONFIG_BF5xx_PPI is not set
+# CONFIG_BFIN_SPORT is not set
+# CONFIG_BFIN_TIMER_LATENCY is not set
+# CONFIG_BF5xx_FBDMA is not set
+# CONFIG_VT is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_BFIN=y
+CONFIG_SERIAL_BFIN_CONSOLE=y
+# CONFIG_SERIAL_BFIN_DMA is not set
+CONFIG_SERIAL_BFIN_PIO=y
+# CONFIG_SERIAL_BFIN_UART0 is not set
+CONFIG_SERIAL_BFIN_UART1=y
+# CONFIG_BFIN_UART1_CTSRTS is not set
+# CONFIG_SERIAL_BFIN_UART2 is not set
+# CONFIG_SERIAL_BFIN_UART3 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_BFIN_SPORT is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+
+#
+# CAN, the car bus and industrial fieldbus
+#
+# CONFIG_CAN4LINUX is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# SPI support
+#
+# CONFIG_SPI is not set
+# CONFIG_SPI_MASTER is not set
+
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# HID Devices
+#
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
+#
+# InfiniBand support
+#
+
+#
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
+#
+
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_BFIN=y
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
+#
+# Auxiliary Display support
+#
+
+#
+# Virtualization
+#
+
+#
+# PBX support
+#
+# CONFIG_PBX is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_YAFFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+# CONFIG_NFS_FS is not set
+# CONFIG_NFSD is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+# CONFIG_NLS is not set
+
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FORCED_INLINING=y
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+CONFIG_DEBUG_HWERR=y
+# CONFIG_DEBUG_ICACHE_CHECK is not set
+# CONFIG_DEBUG_KERNEL_START is not set
+# CONFIG_DEBUG_SERIAL_EARLY_INIT is not set
+CONFIG_DEBUG_HUNT_FOR_ZERO=y
+# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set
+CONFIG_CPLB_INFO=y
+CONFIG_ACCESS_CHECK=y
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITY_NETWORK is not set
+CONFIG_SECURITY_CAPABILITIES=y
+
+#
+# Cryptographic options
+#
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
obj-y := \
entry.o process.o bfin_ksyms.o ptrace.o setup.o signal.o \
- sys_bfin.o time.o traps.o irqchip.o dma-mapping.o bfin_gpio.o \
- flat.o
+ sys_bfin.o time.o traps.o irqchip.o dma-mapping.o flat.o \
+ fixed_code.o cplbinit.o cacheinit.o
+obj-$(CONFIG_BF53x) += bfin_gpio.o
+obj-$(CONFIG_BF561) += bfin_gpio.o
obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o
obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o
+obj-$(CONFIG_KGDB) += kgdb.o
#include <linux/kernel_stat.h>
#include <linux/ptrace.h>
#include <linux/hardirq.h>
-#include <asm/irq.h>
-#include <asm/thread_info.h>
+#include <linux/irq.h>
+#include <linux/thread_info.h>
-#define DEFINE(sym, val) \
- asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+#define DEFINE(sym, val) asm volatile("\n->" #sym " %0 " #val : : "i" (val))
int main(void)
{
#include <linux/kernel.h>
#include <linux/param.h>
+#include <asm/blackfin.h>
#include <asm/dma.h>
#include <asm/cacheflush.h>
***************************************************************************/
static struct dma_channel dma_ch[MAX_BLACKFIN_DMA_CHANNEL];
-#if defined (CONFIG_BF561)
-static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
- (struct dma_register *) DMA1_0_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_1_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_2_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_3_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_4_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_5_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_6_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_7_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_8_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_9_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_10_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_11_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_0_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_1_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_2_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_3_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_4_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_5_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_6_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_7_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_8_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_9_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_10_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_11_NEXT_DESC_PTR,
- (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR,
- (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR,
- (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR,
- (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR,
- (struct dma_register *) MDMA2_D0_NEXT_DESC_PTR,
- (struct dma_register *) MDMA2_S0_NEXT_DESC_PTR,
- (struct dma_register *) MDMA2_D1_NEXT_DESC_PTR,
- (struct dma_register *) MDMA2_S1_NEXT_DESC_PTR,
- (struct dma_register *) IMDMA_D0_NEXT_DESC_PTR,
- (struct dma_register *) IMDMA_S0_NEXT_DESC_PTR,
- (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR,
- (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR,
-};
-#else
-static struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
- (struct dma_register *) DMA0_NEXT_DESC_PTR,
- (struct dma_register *) DMA1_NEXT_DESC_PTR,
- (struct dma_register *) DMA2_NEXT_DESC_PTR,
- (struct dma_register *) DMA3_NEXT_DESC_PTR,
- (struct dma_register *) DMA4_NEXT_DESC_PTR,
- (struct dma_register *) DMA5_NEXT_DESC_PTR,
- (struct dma_register *) DMA6_NEXT_DESC_PTR,
- (struct dma_register *) DMA7_NEXT_DESC_PTR,
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
- (struct dma_register *) DMA8_NEXT_DESC_PTR,
- (struct dma_register *) DMA9_NEXT_DESC_PTR,
- (struct dma_register *) DMA10_NEXT_DESC_PTR,
- (struct dma_register *) DMA11_NEXT_DESC_PTR,
-#endif
- (struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
- (struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
- (struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
- (struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
-};
-#endif
/*------------------------------------------------------------------------------
* Set the Buffer Clear bit in the Configuration register of specific DMA
arch_initcall(blackfin_dma_init);
-/*
- * Form the channel find the irq number for that channel.
- */
-#if !defined(CONFIG_BF561)
-
-static int bf533_channel2irq(unsigned int channel)
-{
- int ret_irq = -1;
-
- switch (channel) {
- case CH_PPI:
- ret_irq = IRQ_PPI;
- break;
-
-#if (defined(CONFIG_BF537) || defined(CONFIG_BF534) || defined(CONFIG_BF536))
- case CH_EMAC_RX:
- ret_irq = IRQ_MAC_RX;
- break;
-
- case CH_EMAC_TX:
- ret_irq = IRQ_MAC_TX;
- break;
-
- case CH_UART1_RX:
- ret_irq = IRQ_UART1_RX;
- break;
-
- case CH_UART1_TX:
- ret_irq = IRQ_UART1_TX;
- break;
-#endif
-
- case CH_SPORT0_RX:
- ret_irq = IRQ_SPORT0_RX;
- break;
-
- case CH_SPORT0_TX:
- ret_irq = IRQ_SPORT0_TX;
- break;
-
- case CH_SPORT1_RX:
- ret_irq = IRQ_SPORT1_RX;
- break;
-
- case CH_SPORT1_TX:
- ret_irq = IRQ_SPORT1_TX;
- break;
-
- case CH_SPI:
- ret_irq = IRQ_SPI;
- break;
-
- case CH_UART_RX:
- ret_irq = IRQ_UART_RX;
- break;
-
- case CH_UART_TX:
- ret_irq = IRQ_UART_TX;
- break;
-
- case CH_MEM_STREAM0_SRC:
- case CH_MEM_STREAM0_DEST:
- ret_irq = IRQ_MEM_DMA0;
- break;
-
- case CH_MEM_STREAM1_SRC:
- case CH_MEM_STREAM1_DEST:
- ret_irq = IRQ_MEM_DMA1;
- break;
- }
- return ret_irq;
-}
-
-# define channel2irq(channel) bf533_channel2irq(channel)
-
-#else
-
-static int bf561_channel2irq(unsigned int channel)
-{
- int ret_irq = -1;
-
- switch (channel) {
- case CH_PPI0:
- ret_irq = IRQ_PPI0;
- break;
- case CH_PPI1:
- ret_irq = IRQ_PPI1;
- break;
- case CH_SPORT0_RX:
- ret_irq = IRQ_SPORT0_RX;
- break;
- case CH_SPORT0_TX:
- ret_irq = IRQ_SPORT0_TX;
- break;
- case CH_SPORT1_RX:
- ret_irq = IRQ_SPORT1_RX;
- break;
- case CH_SPORT1_TX:
- ret_irq = IRQ_SPORT1_TX;
- break;
- case CH_SPI:
- ret_irq = IRQ_SPI;
- break;
- case CH_UART_RX:
- ret_irq = IRQ_UART_RX;
- break;
- case CH_UART_TX:
- ret_irq = IRQ_UART_TX;
- break;
-
- case CH_MEM_STREAM0_SRC:
- case CH_MEM_STREAM0_DEST:
- ret_irq = IRQ_MEM_DMA0;
- break;
- case CH_MEM_STREAM1_SRC:
- case CH_MEM_STREAM1_DEST:
- ret_irq = IRQ_MEM_DMA1;
- break;
- case CH_MEM_STREAM2_SRC:
- case CH_MEM_STREAM2_DEST:
- ret_irq = IRQ_MEM_DMA2;
- break;
- case CH_MEM_STREAM3_SRC:
- case CH_MEM_STREAM3_DEST:
- ret_irq = IRQ_MEM_DMA3;
- break;
-
- case CH_IMEM_STREAM0_SRC:
- case CH_IMEM_STREAM0_DEST:
- ret_irq = IRQ_IMEM_DMA0;
- break;
- case CH_IMEM_STREAM1_SRC:
- case CH_IMEM_STREAM1_DEST:
- ret_irq = IRQ_IMEM_DMA1;
- break;
- }
- return ret_irq;
-}
-
-# define channel2irq(channel) bf561_channel2irq(channel)
-
-#endif
-
/*------------------------------------------------------------------------------
* Request the specific DMA channel from the system.
*-----------------------------------------------------------------------------*/
}
EXPORT_SYMBOL(set_bfin_dma_config);
-void set_dma_sg(unsigned int channel, struct dmasg * sg, int nr_sg)
+void set_dma_sg(unsigned int channel, struct dmasg *sg, int nr_sg)
{
BUG_ON(!(dma_ch[channel].chan_status != DMA_CHANNEL_FREE
&& channel < MAX_BLACKFIN_DMA_CHANNEL));
if (size <= 0)
return NULL;
-
+
local_irq_save(flags);
if ((unsigned long)src < memory_end)
addr = __dma_memcpy(dest+bulk, src+bulk, rest);
return addr;
}
-
EXPORT_SYMBOL(dma_memcpy);
void *safe_dma_memcpy(void *dest, const void *src, size_t size)
void dma_outsb(void __iomem *addr, const void *buf, unsigned short len)
{
-
unsigned long flags;
-
+
local_irq_save(flags);
-
- blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len);
- bfin_write_MDMA_D0_START_ADDR(addr);
+ blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+
+ bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(0);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_insb(const void __iomem *addr, void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
- bfin_write_MDMA_D0_START_ADDR(buf);
+ bfin_write_MDMA_D0_START_ADDR(buf);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(1);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_outsw(void __iomem *addr, const void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
-
- blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len);
- bfin_write_MDMA_D0_START_ADDR(addr);
+ blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+
+ bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(0);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_insw(const void __iomem *addr, void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
-
- bfin_write_MDMA_D0_START_ADDR(buf);
+
+ bfin_write_MDMA_D0_START_ADDR(buf);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(2);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_outsl(void __iomem *addr, const void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
-
- blackfin_dcache_flush_range((unsigned int)buf,(unsigned int)(buf) + len);
- bfin_write_MDMA_D0_START_ADDR(addr);
+ blackfin_dcache_flush_range((unsigned int)buf, (unsigned int)(buf) + len);
+
+ bfin_write_MDMA_D0_START_ADDR(addr);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(0);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
void dma_insl(const void __iomem *addr, void *buf, unsigned short len)
{
unsigned long flags;
-
+
local_irq_save(flags);
-
- bfin_write_MDMA_D0_START_ADDR(buf);
+
+ bfin_write_MDMA_D0_START_ADDR(buf);
bfin_write_MDMA_D0_X_COUNT(len);
bfin_write_MDMA_D0_X_MODIFY(4);
bfin_write_MDMA_D0_IRQ_STATUS(DMA_DONE | DMA_ERR);
static void default_gpio(unsigned short gpio)
{
- unsigned short bank,bitmask;
+ unsigned short bank, bitmask;
bank = gpio_bank(gpio);
bitmask = gpio_bit(gpio);
printk(KERN_INFO "Blackfin GPIO Controller\n");
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE)
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE)
reserved_map[gpio_bank(i)] = 0;
#if defined(BF537_FAMILY) && (defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
u32 sic_iwr = 0;
u16 bank, mask, i, gpio;
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) {
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
mask = wakeup_map[gpio_bank(i)];
bank = gpio_bank(i);
return IWR_ENABLE_ALL;
}
-
void gpio_pm_restore(void)
{
u16 bank, mask, i;
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=GPIO_BANKSIZE) {
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) {
mask = wakeup_map[gpio_bank(i)];
bank = gpio_bank(i);
}
EXPORT_SYMBOL(gpio_request);
-
void gpio_free(unsigned short gpio)
{
unsigned long flags;
}
EXPORT_SYMBOL(gpio_free);
-
void gpio_direction_input(unsigned short gpio)
{
unsigned long flags;
*/
#include <linux/module.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
+#include <linux/uaccess.h>
+
#include <asm/checksum.h>
#include <asm/cacheflush.h>
-#include <asm/uaccess.h>
/* platform dependent support */
--- /dev/null
+/*
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/cpu.h>
+
+#include <asm/cacheflush.h>
+#include <asm/blackfin.h>
+#include <asm/cplbinit.h>
+
+#if defined(CONFIG_BLKFIN_CACHE)
+void bfin_icache_init(void)
+{
+ unsigned long *table = icplb_table;
+ unsigned long ctrl;
+ int i;
+
+ for (i = 0; i < MAX_CPLBS; i++) {
+ unsigned long addr = *table++;
+ unsigned long data = *table++;
+ if (addr == (unsigned long)-1)
+ break;
+ bfin_write32(ICPLB_ADDR0 + i * 4, addr);
+ bfin_write32(ICPLB_DATA0 + i * 4, data);
+ }
+ ctrl = bfin_read_IMEM_CONTROL();
+ ctrl |= IMC | ENICPLB;
+ bfin_write_IMEM_CONTROL(ctrl);
+}
+#endif
+
+#if defined(CONFIG_BLKFIN_DCACHE)
+void bfin_dcache_init(void)
+{
+ unsigned long *table = dcplb_table;
+ unsigned long ctrl;
+ int i;
+
+ for (i = 0; i < MAX_CPLBS; i++) {
+ unsigned long addr = *table++;
+ unsigned long data = *table++;
+ if (addr == (unsigned long)-1)
+ break;
+ bfin_write32(DCPLB_ADDR0 + i * 4, addr);
+ bfin_write32(DCPLB_DATA0 + i * 4, data);
+ }
+ ctrl = bfin_read_DMEM_CONTROL();
+ ctrl |= DMEM_CNTR;
+ bfin_write_DMEM_CONTROL(ctrl);
+}
+#endif
--- /dev/null
+/*
+ * Blackfin CPLB initialization
+ *
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/module.h>
+
+#include <asm/blackfin.h>
+#include <asm/cplbinit.h>
+
+u_long icplb_table[MAX_CPLBS+1];
+u_long dcplb_table[MAX_CPLBS+1];
+
+#ifdef CONFIG_CPLB_SWITCH_TAB_L1
+u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
+u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
+
+#ifdef CONFIG_CPLB_INFO
+u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
+u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
+#endif /* CONFIG_CPLB_INFO */
+
+#else
+
+u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
+u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
+
+#ifdef CONFIG_CPLB_INFO
+u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
+u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
+#endif /* CONFIG_CPLB_INFO */
+
+#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/
+
+struct s_cplb {
+ struct cplb_tab init_i;
+ struct cplb_tab init_d;
+ struct cplb_tab switch_i;
+ struct cplb_tab switch_d;
+};
+
+#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
+static struct cplb_desc cplb_data[] = {
+ {
+ .start = 0,
+ .end = SIZE_1K,
+ .psize = SIZE_1K,
+ .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
+ .i_conf = SDRAM_OOPS,
+ .d_conf = SDRAM_OOPS,
+#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO)
+ .valid = 1,
+#else
+ .valid = 0,
+#endif
+ .name = "ZERO Pointer Saveguard",
+ },
+ {
+ .start = L1_CODE_START,
+ .end = L1_CODE_START + L1_CODE_LENGTH,
+ .psize = SIZE_4M,
+ .attr = INITIAL_T | SWITCH_T | I_CPLB,
+ .i_conf = L1_IMEMORY,
+ .d_conf = 0,
+ .valid = 1,
+ .name = "L1 I-Memory",
+ },
+ {
+ .start = L1_DATA_A_START,
+ .end = L1_DATA_B_START + L1_DATA_B_LENGTH,
+ .psize = SIZE_4M,
+ .attr = INITIAL_T | SWITCH_T | D_CPLB,
+ .i_conf = 0,
+ .d_conf = L1_DMEMORY,
+#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0))
+ .valid = 1,
+#else
+ .valid = 0,
+#endif
+ .name = "L1 D-Memory",
+ },
+ {
+ .start = 0,
+ .end = 0, /* dynamic */
+ .psize = 0,
+ .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DGENERIC,
+ .valid = 1,
+ .name = "SDRAM Kernel",
+ },
+ {
+ .start = 0, /* dynamic */
+ .end = 0, /* dynamic */
+ .psize = 0,
+ .attr = INITIAL_T | SWITCH_T | D_CPLB,
+ .i_conf = SDRAM_IGENERIC,
+ .d_conf = SDRAM_DNON_CHBL,
+ .valid = 1,
+ .name = "SDRAM RAM MTD",
+ },
+ {
+ .start = 0, /* dynamic */
+ .end = 0, /* dynamic */
+ .psize = SIZE_1M,
+ .attr = INITIAL_T | SWITCH_T | D_CPLB,
+ .d_conf = SDRAM_DNON_CHBL,
+ .valid = 1,
+ .name = "SDRAM Uncached DMA ZONE",
+ },
+ {
+ .start = 0, /* dynamic */
+ .end = 0, /* dynamic */
+ .psize = 0,
+ .attr = SWITCH_T | D_CPLB,
+ .i_conf = 0, /* dynamic */
+ .d_conf = 0, /* dynamic */
+ .valid = 1,
+ .name = "SDRAM Reserved Memory",
+ },
+ {
+ .start = ASYNC_BANK0_BASE,
+ .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE,
+ .psize = 0,
+ .attr = SWITCH_T | D_CPLB,
+ .d_conf = SDRAM_EBIU,
+ .valid = 1,
+ .name = "ASYNC Memory",
+ },
+ {
+#if defined(CONFIG_BF561)
+ .start = L2_SRAM,
+ .end = L2_SRAM_END,
+ .psize = SIZE_1M,
+ .attr = SWITCH_T | D_CPLB,
+ .i_conf = L2_MEMORY,
+ .d_conf = L2_MEMORY,
+ .valid = 1,
+#else
+ .valid = 0,
+#endif
+ .name = "L2 Memory",
+ }
+};
+
+static u16 __init lock_kernel_check(u32 start, u32 end)
+{
+ if ((start <= (u32) _stext && end >= (u32) _end)
+ || (start >= (u32) _stext && end <= (u32) _end))
+ return IN_KERNEL;
+ return 0;
+}
+
+static unsigned short __init
+fill_cplbtab(struct cplb_tab *table,
+ unsigned long start, unsigned long end,
+ unsigned long block_size, unsigned long cplb_data)
+{
+ int i;
+
+ switch (block_size) {
+ case SIZE_4M:
+ i = 3;
+ break;
+ case SIZE_1M:
+ i = 2;
+ break;
+ case SIZE_4K:
+ i = 1;
+ break;
+ case SIZE_1K:
+ default:
+ i = 0;
+ break;
+ }
+
+ cplb_data = (cplb_data & ~(3 << 16)) | (i << 16);
+
+ while ((start < end) && (table->pos < table->size)) {
+
+ table->tab[table->pos++] = start;
+
+ if (lock_kernel_check(start, start + block_size) == IN_KERNEL)
+ table->tab[table->pos++] =
+ cplb_data | CPLB_LOCK | CPLB_DIRTY;
+ else
+ table->tab[table->pos++] = cplb_data;
+
+ start += block_size;
+ }
+ return 0;
+}
+
+static unsigned short __init
+close_cplbtab(struct cplb_tab *table)
+{
+
+ while (table->pos < table->size) {
+
+ table->tab[table->pos++] = 0;
+ table->tab[table->pos++] = 0; /* !CPLB_VALID */
+ }
+ return 0;
+}
+
+/* helper function */
+static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
+{
+ if (cplb_data[i].psize) {
+ fill_cplbtab(t,
+ cplb_data[i].start,
+ cplb_data[i].end,
+ cplb_data[i].psize,
+ cplb_data[i].i_conf);
+ } else {
+#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
+ if (i == SDRAM_KERN) {
+ fill_cplbtab(t,
+ cplb_data[i].start,
+ cplb_data[i].end,
+ SIZE_4M,
+ cplb_data[i].i_conf);
+ } else
+#endif
+ {
+ fill_cplbtab(t,
+ cplb_data[i].start,
+ a_start,
+ SIZE_1M,
+ cplb_data[i].i_conf);
+ fill_cplbtab(t,
+ a_start,
+ a_end,
+ SIZE_4M,
+ cplb_data[i].i_conf);
+ fill_cplbtab(t, a_end,
+ cplb_data[i].end,
+ SIZE_1M,
+ cplb_data[i].i_conf);
+ }
+ }
+}
+
+static void __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end)
+{
+ if (cplb_data[i].psize) {
+ fill_cplbtab(t,
+ cplb_data[i].start,
+ cplb_data[i].end,
+ cplb_data[i].psize,
+ cplb_data[i].d_conf);
+ } else {
+ fill_cplbtab(t,
+ cplb_data[i].start,
+ a_start, SIZE_1M,
+ cplb_data[i].d_conf);
+ fill_cplbtab(t, a_start,
+ a_end, SIZE_4M,
+ cplb_data[i].d_conf);
+ fill_cplbtab(t, a_end,
+ cplb_data[i].end,
+ SIZE_1M,
+ cplb_data[i].d_conf);
+ }
+}
+
+void __init generate_cpl_tables(void)
+{
+
+ u16 i, j, process;
+ u32 a_start, a_end, as, ae, as_1m;
+
+ struct cplb_tab *t_i = NULL;
+ struct cplb_tab *t_d = NULL;
+ struct s_cplb cplb;
+
+ cplb.init_i.size = MAX_CPLBS;
+ cplb.init_d.size = MAX_CPLBS;
+ cplb.switch_i.size = MAX_SWITCH_I_CPLBS;
+ cplb.switch_d.size = MAX_SWITCH_D_CPLBS;
+
+ cplb.init_i.pos = 0;
+ cplb.init_d.pos = 0;
+ cplb.switch_i.pos = 0;
+ cplb.switch_d.pos = 0;
+
+ cplb.init_i.tab = icplb_table;
+ cplb.init_d.tab = dcplb_table;
+ cplb.switch_i.tab = ipdt_table;
+ cplb.switch_d.tab = dpdt_table;
+
+ cplb_data[SDRAM_KERN].end = memory_end;
+
+#ifdef CONFIG_MTD_UCLINUX
+ cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start;
+ cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size;
+ cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0;
+# if defined(CONFIG_ROMFS_FS)
+ cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB;
+
+ /*
+ * The ROMFS_FS size is often not multiple of 1MB.
+ * This can cause multiple CPLB sets covering the same memory area.
+ * This will then cause multiple CPLB hit exceptions.
+ * Workaround: We ensure a contiguous memory area by extending the kernel
+ * memory section over the mtd section.
+ * For ROMFS_FS memory must be covered with ICPLBs anyways.
+ * So there is no difference between kernel and mtd memory setup.
+ */
+
+ cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;;
+ cplb_data[SDRAM_RAM_MTD].valid = 0;
+
+# endif
+#else
+ cplb_data[SDRAM_RAM_MTD].valid = 0;
+#endif
+
+ cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION;
+ cplb_data[SDRAM_DMAZ].end = _ramend;
+
+ cplb_data[RES_MEM].start = _ramend;
+ cplb_data[RES_MEM].end = physical_mem_end;
+
+ if (reserved_mem_dcache_on)
+ cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC;
+ else
+ cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL;
+
+ if (reserved_mem_icache_on)
+ cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC;
+ else
+ cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL;
+
+ for (i = ZERO_P; i <= L2_MEM; i++) {
+ if (!cplb_data[i].valid)
+ continue;
+
+ as_1m = cplb_data[i].start % SIZE_1M;
+
+ /* We need to make sure all sections are properly 1M aligned
+ * However between Kernel Memory and the Kernel mtd section, depending on the
+ * rootfs size, there can be overlapping memory areas.
+ */
+
+ if (as_1m && i != L1I_MEM && i != L1D_MEM) {
+#ifdef CONFIG_MTD_UCLINUX
+ if (i == SDRAM_RAM_MTD) {
+ if ((cplb_data[SDRAM_KERN].end + 1) > cplb_data[SDRAM_RAM_MTD].start)
+ cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M)) + SIZE_1M;
+ else
+ cplb_data[SDRAM_RAM_MTD].start = (cplb_data[i].start & (-2*SIZE_1M));
+ } else
+#endif
+ printk(KERN_WARNING "Unaligned Start of %s at 0x%X\n",
+ cplb_data[i].name, cplb_data[i].start);
+ }
+
+ as = cplb_data[i].start % SIZE_4M;
+ ae = cplb_data[i].end % SIZE_4M;
+
+ if (as)
+ a_start = cplb_data[i].start + (SIZE_4M - (as));
+ else
+ a_start = cplb_data[i].start;
+
+ a_end = cplb_data[i].end - ae;
+
+ for (j = INITIAL_T; j <= SWITCH_T; j++) {
+
+ switch (j) {
+ case INITIAL_T:
+ if (cplb_data[i].attr & INITIAL_T) {
+ t_i = &cplb.init_i;
+ t_d = &cplb.init_d;
+ process = 1;
+ } else
+ process = 0;
+ break;
+ case SWITCH_T:
+ if (cplb_data[i].attr & SWITCH_T) {
+ t_i = &cplb.switch_i;
+ t_d = &cplb.switch_d;
+ process = 1;
+ } else
+ process = 0;
+ break;
+ default:
+ process = 0;
+ break;
+ }
+
+ if (!process)
+ continue;
+ if (cplb_data[i].attr & I_CPLB)
+ __fill_code_cplbtab(t_i, i, a_start, a_end);
+
+ if (cplb_data[i].attr & D_CPLB)
+ __fill_data_cplbtab(t_d, i, a_start, a_end);
+ }
+ }
+
+/* close tables */
+
+ close_cplbtab(&cplb.init_i);
+ close_cplbtab(&cplb.init_d);
+
+ cplb.init_i.tab[cplb.init_i.pos] = -1;
+ cplb.init_d.tab[cplb.init_d.pos] = -1;
+ cplb.switch_i.tab[cplb.switch_i.pos] = -1;
+ cplb.switch_d.tab[cplb.switch_d.pos] = -1;
+
+}
+
+#endif
+
#include <linux/spinlock.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
-#include <asm/io.h>
#include <asm/bfin-global.h>
static spinlock_t dma_page_lock;
BUG_ON(direction == DMA_NONE);
- for (i = 0; i < nents; i++)
- invalidate_dcache_range(sg_dma_address(&sg[i]),
- sg_dma_address(&sg[i]) +
- sg_dma_len(&sg[i]));
+ for (i = 0; i < nents; i++, sg++) {
+ sg->dma_address = page_address(sg->page) + sg->offset;
+
+ invalidate_dcache_range(sg_dma_address(sg),
+ sg_dma_address(sg) +
+ sg_dma_len(sg));
+ }
return nents;
}
#include <linux/init.h>
#include <linux/module.h>
-static int *testarg = (int*)0xfeb00000;
+static int *testarg = (int *)0xfeb00000;
static int test_init(void)
{
*testarg = 1;
- printk("Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
+ printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
*testarg, testarg);
return 0;
}
static void test_exit(void)
{
- printk("Dual core test module removed: testarg = [%d]\n", *testarg);
+ printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg);
}
module_init(test_init);
--- /dev/null
+/*
+ * This file contains sequences of code that will be copied to a
+ * fixed location, defined in <asm/atomic_seq.h>. The interrupt
+ * handlers ensure that these sequences appear to be atomic when
+ * executed from userspace.
+ * These are aligned to 16 bytes, so that we have some space to replace
+ * these sequences with something else (e.g. kernel traps if we ever do
+ * BF561 SMP).
+ */
+#include <linux/linkage.h>
+#include <linux/unistd.h>
+#include <asm/entry.h>
+
+.text
+ENTRY(_fixed_code_start)
+
+.align 16
+ENTRY(_sigreturn_stub)
+ P0 = __NR_rt_sigreturn;
+ EXCPT 0;
+ /* Speculative execution paranoia. */
+0: JUMP.S 0b;
+ENDPROC (_sigreturn_stub)
+
+.align 16
+ /*
+ * Atomic swap, 8 bit.
+ * Inputs: P0: memory address to use
+ * R1: value to store
+ * Output: R0: old contents of the memory address, zero extended.
+ */
+ENTRY(_atomic_xchg32)
+ R0 = [P0];
+ [P0] = R1;
+ rts;
+ENDPROC (_atomic_xchg32)
+
+.align 16
+ /*
+ * Compare and swap, 32 bit.
+ * Inputs: P0: memory address to use
+ * R1: compare value
+ * R2: new value to store
+ * The new value is stored if the contents of the memory
+ * address is equal to the compare value.
+ * Output: R0: old contents of the memory address.
+ */
+ENTRY(_atomic_cas32)
+ R0 = [P0];
+ CC = R0 == R1;
+ IF !CC JUMP 1f;
+ [P0] = R2;
+1:
+ rts;
+ENDPROC (_atomic_cas32)
+
+.align 16
+ /*
+ * Atomic add, 32 bit.
+ * Inputs: P0: memory address to use
+ * R0: value to add
+ * Outputs: R0: new contents of the memory address.
+ * R1: previous contents of the memory address.
+ */
+ENTRY(_atomic_add32)
+ R1 = [P0];
+ R0 = R1 + R0;
+ [P0] = R0;
+ rts;
+ENDPROC (_atomic_add32)
+
+.align 16
+ /*
+ * Atomic sub, 32 bit.
+ * Inputs: P0: memory address to use
+ * R0: value to subtract
+ * Outputs: R0: new contents of the memory address.
+ * R1: previous contents of the memory address.
+ */
+ENTRY(_atomic_sub32)
+ R1 = [P0];
+ R0 = R1 - R0;
+ [P0] = R0;
+ rts;
+ENDPROC (_atomic_sub32)
+
+.align 16
+ /*
+ * Atomic ior, 32 bit.
+ * Inputs: P0: memory address to use
+ * R0: value to ior
+ * Outputs: R0: new contents of the memory address.
+ * R1: previous contents of the memory address.
+ */
+ENTRY(_atomic_ior32)
+ R1 = [P0];
+ R0 = R1 | R0;
+ [P0] = R0;
+ rts;
+ENDPROC (_atomic_ior32)
+
+.align 16
+ /*
+ * Atomic ior, 32 bit.
+ * Inputs: P0: memory address to use
+ * R0: value to ior
+ * Outputs: R0: new contents of the memory address.
+ * R1: previous contents of the memory address.
+ */
+ENTRY(_atomic_and32)
+ R1 = [P0];
+ R0 = R1 & R0;
+ [P0] = R0;
+ rts;
+ENDPROC (_atomic_ior32)
+
+.align 16
+ /*
+ * Atomic ior, 32 bit.
+ * Inputs: P0: memory address to use
+ * R0: value to ior
+ * Outputs: R0: new contents of the memory address.
+ * R1: previous contents of the memory address.
+ */
+ENTRY(_atomic_xor32)
+ R1 = [P0];
+ R0 = R1 ^ R0;
+ [P0] = R0;
+ rts;
+ENDPROC (_atomic_ior32)
+
+ENTRY(_fixed_code_end)
unsigned long val;
switch (type) {
- case FLAT_BFIN_RELOC_TYPE_16_BIT:
- case FLAT_BFIN_RELOC_TYPE_16H_BIT:
- usptr = (unsigned short *)ptr;
- pr_debug("*usptr = %x", get_unaligned(usptr));
- val = get_unaligned(usptr);
- val += *persistent;
- break;
+ case FLAT_BFIN_RELOC_TYPE_16_BIT:
+ case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+ usptr = (unsigned short *)ptr;
+ pr_debug("*usptr = %x", get_unaligned(usptr));
+ val = get_unaligned(usptr);
+ val += *persistent;
+ break;
- case FLAT_BFIN_RELOC_TYPE_32_BIT:
- pr_debug("*ptr = %lx", get_unaligned(ptr));
- val = get_unaligned(ptr);
- break;
+ case FLAT_BFIN_RELOC_TYPE_32_BIT:
+ pr_debug("*ptr = %lx", get_unaligned(ptr));
+ val = get_unaligned(ptr);
+ break;
- default:
- pr_debug("BINFMT_FLAT: Unknown relocation type %x\n",
- type);
-
- return 0;
+ default:
+ pr_debug("BINFMT_FLAT: Unknown relocation type %x\n", type);
+ return 0;
}
/*
int type = (relval >> 26) & 7;
switch (type) {
- case FLAT_BFIN_RELOC_TYPE_16_BIT:
- put_unaligned(addr, usptr);
- pr_debug("new value %x at %p", get_unaligned(usptr),
- usptr);
- break;
+ case FLAT_BFIN_RELOC_TYPE_16_BIT:
+ put_unaligned(addr, usptr);
+ pr_debug("new value %x at %p", get_unaligned(usptr), usptr);
+ break;
- case FLAT_BFIN_RELOC_TYPE_16H_BIT:
- put_unaligned(addr >> 16, usptr);
- pr_debug("new value %x", get_unaligned(usptr));
- break;
+ case FLAT_BFIN_RELOC_TYPE_16H_BIT:
+ put_unaligned(addr >> 16, usptr);
+ pr_debug("new value %x", get_unaligned(usptr));
+ break;
- case FLAT_BFIN_RELOC_TYPE_32_BIT:
- put_unaligned(addr, ptr);
- pr_debug("new ptr =%lx", get_unaligned(ptr));
- break;
+ case FLAT_BFIN_RELOC_TYPE_32_BIT:
+ put_unaligned(addr, ptr);
+ pr_debug("new ptr =%lx", get_unaligned(ptr));
+ break;
}
}
EXPORT_SYMBOL(bfin_put_addr_at_rp);
seq_printf(p, ", %s", action->name);
seq_putc(p, '\n');
- unlock:
+ unlock:
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
} else if (i == NR_IRQS) {
seq_printf(p, "Err: %10lu\n", irq_err_count);
--- /dev/null
+/*
+ * File: arch/blackfin/kernel/kgdb.c
+ * Based on:
+ * Author: Sonic Zhang
+ *
+ * Created:
+ * Description:
+ *
+ * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
+ *
+ * Modified:
+ * Copyright 2005-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/string.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/ptrace.h> /* for linux pt_regs struct */
+#include <linux/kgdb.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/debugger.h>
+#include <linux/errno.h>
+#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/traps.h>
+#include <asm/blackfin.h>
+
+/* Put the error code here just in case the user cares. */
+int gdb_bf533errcode;
+/* Likewise, the vector number here (since GDB only gets the signal
+ number through the usual means, and that's not very specific). */
+int gdb_bf533vector = -1;
+
+#if KGDB_MAX_NO_CPUS != 8
+#error change the definition of slavecpulocks
+#endif
+
+void regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ gdb_regs[BFIN_R0] = regs->r0;
+ gdb_regs[BFIN_R1] = regs->r1;
+ gdb_regs[BFIN_R2] = regs->r2;
+ gdb_regs[BFIN_R3] = regs->r3;
+ gdb_regs[BFIN_R4] = regs->r4;
+ gdb_regs[BFIN_R5] = regs->r5;
+ gdb_regs[BFIN_R6] = regs->r6;
+ gdb_regs[BFIN_R7] = regs->r7;
+ gdb_regs[BFIN_P0] = regs->p0;
+ gdb_regs[BFIN_P1] = regs->p1;
+ gdb_regs[BFIN_P2] = regs->p2;
+ gdb_regs[BFIN_P3] = regs->p3;
+ gdb_regs[BFIN_P4] = regs->p4;
+ gdb_regs[BFIN_P5] = regs->p5;
+ gdb_regs[BFIN_SP] = regs->reserved;
+ gdb_regs[BFIN_FP] = regs->fp;
+ gdb_regs[BFIN_I0] = regs->i0;
+ gdb_regs[BFIN_I1] = regs->i1;
+ gdb_regs[BFIN_I2] = regs->i2;
+ gdb_regs[BFIN_I3] = regs->i3;
+ gdb_regs[BFIN_M0] = regs->m0;
+ gdb_regs[BFIN_M1] = regs->m1;
+ gdb_regs[BFIN_M2] = regs->m2;
+ gdb_regs[BFIN_M3] = regs->m3;
+ gdb_regs[BFIN_B0] = regs->b0;
+ gdb_regs[BFIN_B1] = regs->b1;
+ gdb_regs[BFIN_B2] = regs->b2;
+ gdb_regs[BFIN_B3] = regs->b3;
+ gdb_regs[BFIN_L0] = regs->l0;
+ gdb_regs[BFIN_L1] = regs->l1;
+ gdb_regs[BFIN_L2] = regs->l2;
+ gdb_regs[BFIN_L3] = regs->l3;
+ gdb_regs[BFIN_A0_DOT_X] = regs->a0x;
+ gdb_regs[BFIN_A0_DOT_W] = regs->a0w;
+ gdb_regs[BFIN_A1_DOT_X] = regs->a1x;
+ gdb_regs[BFIN_A1_DOT_W] = regs->a1w;
+ gdb_regs[BFIN_ASTAT] = regs->astat;
+ gdb_regs[BFIN_RETS] = regs->rets;
+ gdb_regs[BFIN_LC0] = regs->lc0;
+ gdb_regs[BFIN_LT0] = regs->lt0;
+ gdb_regs[BFIN_LB0] = regs->lb0;
+ gdb_regs[BFIN_LC1] = regs->lc1;
+ gdb_regs[BFIN_LT1] = regs->lt1;
+ gdb_regs[BFIN_LB1] = regs->lb1;
+ gdb_regs[BFIN_CYCLES] = 0;
+ gdb_regs[BFIN_CYCLES2] = 0;
+ gdb_regs[BFIN_USP] = regs->usp;
+ gdb_regs[BFIN_SEQSTAT] = regs->seqstat;
+ gdb_regs[BFIN_SYSCFG] = regs->syscfg;
+ gdb_regs[BFIN_RETI] = regs->pc;
+ gdb_regs[BFIN_RETX] = regs->retx;
+ gdb_regs[BFIN_RETN] = regs->retn;
+ gdb_regs[BFIN_RETE] = regs->rete;
+ gdb_regs[BFIN_PC] = regs->pc;
+ gdb_regs[BFIN_CC] = 0;
+ gdb_regs[BFIN_EXTRA1] = 0;
+ gdb_regs[BFIN_EXTRA2] = 0;
+ gdb_regs[BFIN_EXTRA3] = 0;
+ gdb_regs[BFIN_IPEND] = regs->ipend;
+}
+
+/*
+ * Extracts ebp, esp and eip values understandable by gdb from the values
+ * saved by switch_to.
+ * thread.esp points to ebp. flags and ebp are pushed in switch_to hence esp
+ * prior to entering switch_to is 8 greater then the value that is saved.
+ * If switch_to changes, change following code appropriately.
+ */
+void sleeping_thread_to_gdb_regs(unsigned long *gdb_regs, struct task_struct *p)
+{
+ gdb_regs[BFIN_SP] = p->thread.ksp;
+ gdb_regs[BFIN_PC] = p->thread.pc;
+ gdb_regs[BFIN_SEQSTAT] = p->thread.seqstat;
+}
+
+void gdb_regs_to_regs(unsigned long *gdb_regs, struct pt_regs *regs)
+{
+ regs->r0 = gdb_regs[BFIN_R0];
+ regs->r1 = gdb_regs[BFIN_R1];
+ regs->r2 = gdb_regs[BFIN_R2];
+ regs->r3 = gdb_regs[BFIN_R3];
+ regs->r4 = gdb_regs[BFIN_R4];
+ regs->r5 = gdb_regs[BFIN_R5];
+ regs->r6 = gdb_regs[BFIN_R6];
+ regs->r7 = gdb_regs[BFIN_R7];
+ regs->p0 = gdb_regs[BFIN_P0];
+ regs->p1 = gdb_regs[BFIN_P1];
+ regs->p2 = gdb_regs[BFIN_P2];
+ regs->p3 = gdb_regs[BFIN_P3];
+ regs->p4 = gdb_regs[BFIN_P4];
+ regs->p5 = gdb_regs[BFIN_P5];
+ regs->fp = gdb_regs[BFIN_FP];
+ regs->i0 = gdb_regs[BFIN_I0];
+ regs->i1 = gdb_regs[BFIN_I1];
+ regs->i2 = gdb_regs[BFIN_I2];
+ regs->i3 = gdb_regs[BFIN_I3];
+ regs->m0 = gdb_regs[BFIN_M0];
+ regs->m1 = gdb_regs[BFIN_M1];
+ regs->m2 = gdb_regs[BFIN_M2];
+ regs->m3 = gdb_regs[BFIN_M3];
+ regs->b0 = gdb_regs[BFIN_B0];
+ regs->b1 = gdb_regs[BFIN_B1];
+ regs->b2 = gdb_regs[BFIN_B2];
+ regs->b3 = gdb_regs[BFIN_B3];
+ regs->l0 = gdb_regs[BFIN_L0];
+ regs->l1 = gdb_regs[BFIN_L1];
+ regs->l2 = gdb_regs[BFIN_L2];
+ regs->l3 = gdb_regs[BFIN_L3];
+ regs->a0x = gdb_regs[BFIN_A0_DOT_X];
+ regs->a0w = gdb_regs[BFIN_A0_DOT_W];
+ regs->a1x = gdb_regs[BFIN_A1_DOT_X];
+ regs->a1w = gdb_regs[BFIN_A1_DOT_W];
+ regs->rets = gdb_regs[BFIN_RETS];
+ regs->lc0 = gdb_regs[BFIN_LC0];
+ regs->lt0 = gdb_regs[BFIN_LT0];
+ regs->lb0 = gdb_regs[BFIN_LB0];
+ regs->lc1 = gdb_regs[BFIN_LC1];
+ regs->lt1 = gdb_regs[BFIN_LT1];
+ regs->lb1 = gdb_regs[BFIN_LB1];
+ regs->usp = gdb_regs[BFIN_USP];
+ regs->syscfg = gdb_regs[BFIN_SYSCFG];
+ regs->retx = gdb_regs[BFIN_PC];
+ regs->retn = gdb_regs[BFIN_RETN];
+ regs->rete = gdb_regs[BFIN_RETE];
+ regs->pc = gdb_regs[BFIN_PC];
+
+#if 0 /* can't change these */
+ regs->astat = gdb_regs[BFIN_ASTAT];
+ regs->seqstat = gdb_regs[BFIN_SEQSTAT];
+ regs->ipend = gdb_regs[BFIN_IPEND];
+#endif
+}
+
+struct hw_breakpoint {
+ unsigned int occupied:1;
+ unsigned int skip:1;
+ unsigned int enabled:1;
+ unsigned int type:1;
+ unsigned int dataacc:2;
+ unsigned short count;
+ unsigned int addr;
+} breakinfo[HW_BREAKPOINT_NUM];
+
+int kgdb_arch_init(void)
+{
+ kgdb_remove_all_hw_break();
+ return 0;
+}
+
+int kgdb_set_hw_break(unsigned long addr)
+{
+ int breakno;
+ for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++)
+ if (!breakinfo[breakno].occupied) {
+ breakinfo[breakno].occupied = 1;
+ breakinfo[breakno].enabled = 1;
+ breakinfo[breakno].type = 1;
+ breakinfo[breakno].addr = addr;
+ return 0;
+ }
+
+ return -ENOSPC;
+}
+
+int kgdb_remove_hw_break(unsigned long addr)
+{
+ int breakno;
+ for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++)
+ if (breakinfo[breakno].addr == addr)
+ memset(&(breakinfo[breakno]), 0, sizeof(struct hw_breakpoint));
+
+ return 0;
+}
+
+void kgdb_remove_all_hw_break(void)
+{
+ memset(breakinfo, 0, sizeof(struct hw_breakpoint)*8);
+}
+
+/*
+void kgdb_show_info(void)
+{
+ printk(KERN_DEBUG "hwd: wpia0=0x%x, wpiacnt0=%d, wpiactl=0x%x, wpstat=0x%x\n",
+ bfin_read_WPIA0(), bfin_read_WPIACNT0(),
+ bfin_read_WPIACTL(), bfin_read_WPSTAT());
+}
+*/
+
+void kgdb_correct_hw_break(void)
+{
+ int breakno;
+ int correctit;
+ uint32_t wpdactl = bfin_read_WPDACTL();
+
+ correctit = 0;
+ for (breakno = 0; breakno < HW_BREAKPOINT_NUM; breakno++) {
+ if (breakinfo[breakno].type == 1) {
+ switch (breakno) {
+ case 0:
+ if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN0)) {
+ correctit = 1;
+ wpdactl &= ~(WPIREN01|EMUSW0);
+ wpdactl |= WPIAEN0|WPICNTEN0;
+ bfin_write_WPIA0(breakinfo[breakno].addr);
+ bfin_write_WPIACNT0(breakinfo[breakno].skip);
+ } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN0)) {
+ correctit = 1;
+ wpdactl &= ~WPIAEN0;
+ }
+ break;
+
+ case 1:
+ if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN1)) {
+ correctit = 1;
+ wpdactl &= ~(WPIREN01|EMUSW1);
+ wpdactl |= WPIAEN1|WPICNTEN1;
+ bfin_write_WPIA1(breakinfo[breakno].addr);
+ bfin_write_WPIACNT1(breakinfo[breakno].skip);
+ } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN1)) {
+ correctit = 1;
+ wpdactl &= ~WPIAEN1;
+ }
+ break;
+
+ case 2:
+ if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN2)) {
+ correctit = 1;
+ wpdactl &= ~(WPIREN23|EMUSW2);
+ wpdactl |= WPIAEN2|WPICNTEN2;
+ bfin_write_WPIA2(breakinfo[breakno].addr);
+ bfin_write_WPIACNT2(breakinfo[breakno].skip);
+ } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN2)) {
+ correctit = 1;
+ wpdactl &= ~WPIAEN2;
+ }
+ break;
+
+ case 3:
+ if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN3)) {
+ correctit = 1;
+ wpdactl &= ~(WPIREN23|EMUSW3);
+ wpdactl |= WPIAEN3|WPICNTEN3;
+ bfin_write_WPIA3(breakinfo[breakno].addr);
+ bfin_write_WPIACNT3(breakinfo[breakno].skip);
+ } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN3)) {
+ correctit = 1;
+ wpdactl &= ~WPIAEN3;
+ }
+ break;
+ case 4:
+ if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN4)) {
+ correctit = 1;
+ wpdactl &= ~(WPIREN45|EMUSW4);
+ wpdactl |= WPIAEN4|WPICNTEN4;
+ bfin_write_WPIA4(breakinfo[breakno].addr);
+ bfin_write_WPIACNT4(breakinfo[breakno].skip);
+ } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN4)) {
+ correctit = 1;
+ wpdactl &= ~WPIAEN4;
+ }
+ break;
+ case 5:
+ if (breakinfo[breakno].enabled && !(wpdactl & WPIAEN5)) {
+ correctit = 1;
+ wpdactl &= ~(WPIREN45|EMUSW5);
+ wpdactl |= WPIAEN5|WPICNTEN5;
+ bfin_write_WPIA5(breakinfo[breakno].addr);
+ bfin_write_WPIACNT5(breakinfo[breakno].skip);
+ } else if (!breakinfo[breakno].enabled && (wpdactl & WPIAEN5)) {
+ correctit = 1;
+ wpdactl &= ~WPIAEN5;
+ }
+ break;
+ }
+ }
+ }
+ if (correctit) {
+ wpdactl &= ~WPAND;
+ wpdactl |= WPPWR;
+ /*printk("correct_hw_break: wpdactl=0x%x\n", wpdactl);*/
+ bfin_write_WPDACTL(wpdactl);
+ CSYNC();
+ /*kgdb_show_info();*/
+ }
+}
+
+void kgdb_disable_hw_debug(struct pt_regs *regs)
+{
+ /* Disable hardware debugging while we are in kgdb */
+ bfin_write_WPIACTL(bfin_read_WPIACTL() & ~0x1);
+ CSYNC();
+}
+
+void kgdb_post_master_code(struct pt_regs *regs, int eVector, int err_code)
+{
+ /* Master processor is completely in the debugger */
+ gdb_bf533vector = eVector;
+ gdb_bf533errcode = err_code;
+}
+
+int kgdb_arch_handle_exception(int exceptionVector, int signo,
+ int err_code, char *remcom_in_buffer,
+ char *remcom_out_buffer,
+ struct pt_regs *linux_regs)
+{
+ long addr;
+ long breakno;
+ char *ptr;
+ int newPC;
+ int wp_status;
+
+ switch (remcom_in_buffer[0]) {
+ case 'c':
+ case 's':
+ if (kgdb_contthread && kgdb_contthread != current) {
+ strcpy(remcom_out_buffer, "E00");
+ break;
+ }
+
+ kgdb_contthread = NULL;
+
+ /* try to read optional parameter, pc unchanged if no parm */
+ ptr = &remcom_in_buffer[1];
+ if (kgdb_hex2long(&ptr, &addr)) {
+ linux_regs->retx = addr;
+ }
+ newPC = linux_regs->retx;
+
+ /* clear the trace bit */
+ linux_regs->syscfg &= 0xfffffffe;
+
+ /* set the trace bit if we're stepping */
+ if (remcom_in_buffer[0] == 's') {
+ linux_regs->syscfg |= 0x1;
+ debugger_step = 1;
+ }
+
+ wp_status = bfin_read_WPSTAT();
+ CSYNC();
+
+ if (exceptionVector == VEC_WATCH) {
+ for (breakno = 0; breakno < 6; ++breakno) {
+ if (wp_status & (1 << breakno)) {
+ breakinfo->skip = 1;
+ break;
+ }
+ }
+ }
+ kgdb_correct_hw_break();
+
+ bfin_write_WPSTAT(0);
+
+ return 0;
+ } /* switch */
+ return -1; /* this means that we do not want to exit from the handler */
+}
+
+struct kgdb_arch arch_kgdb_ops = {
+ .gdb_bpt_instr = {0xa1},
+ .flags = KGDB_HW_BREAKPOINT,
+};
for (s = sechdrs; s < sechdrs_end; ++s) {
if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) ||
- ((strcmp(".text", secstrings + s->sh_name)==0) &&
- (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
+ ((strcmp(".text", secstrings + s->sh_name) == 0) &&
+ (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) {
mod->arch.text_l1 = s;
dest = l1_inst_sram_alloc(s->sh_size);
if (dest == NULL) {
s->sh_flags &= ~SHF_ALLOC;
s->sh_addr = (unsigned long)dest;
}
- if ((strcmp(".l1.data", secstrings + s->sh_name) == 0)||
- ((strcmp(".data", secstrings + s->sh_name)==0) &&
- (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+ if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) ||
+ ((strcmp(".data", secstrings + s->sh_name) == 0) &&
+ (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
mod->arch.data_a_l1 = s;
dest = l1_data_sram_alloc(s->sh_size);
if (dest == NULL) {
s->sh_addr = (unsigned long)dest;
}
if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 ||
- ((strcmp(".bss", secstrings + s->sh_name)==0) &&
- (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
+ ((strcmp(".bss", secstrings + s->sh_name) == 0) &&
+ (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) {
mod->arch.bss_a_l1 = s;
dest = l1_data_sram_alloc(s->sh_size);
if (dest == NULL) {
pr_debug("before %x after %x\n", *location16,
(value & 0xffff));
tmp = (value & 0xffff);
- if((unsigned long)location16 >= L1_CODE_START) {
+ if ((unsigned long)location16 >= L1_CODE_START) {
dma_memcpy(location16, &tmp, 2);
} else
*location16 = tmp;
pr_debug("before %x after %x\n", *location16,
((value >> 16) & 0xffff));
tmp = ((value >> 16) & 0xffff);
- if((unsigned long)location16 >= L1_CODE_START) {
+ if ((unsigned long)location16 >= L1_CODE_START) {
dma_memcpy(location16, &tmp, 2);
} else
*location16 = tmp;
continue;
if ((sechdrs[i].sh_type == SHT_RELA) &&
- ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0)||
- ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
+ ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) ||
+ ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) &&
(hdr->e_flags & FLG_CODE_IN_L1)))) {
apply_relocate_add((Elf_Shdr *) sechdrs, strtab,
symindex, i, mod);
void module_arch_cleanup(struct module *mod)
{
if ((mod->arch.text_l1) && (mod->arch.text_l1->sh_addr))
- l1_inst_sram_free((void*)mod->arch.text_l1->sh_addr);
+ l1_inst_sram_free((void *)mod->arch.text_l1->sh_addr);
if ((mod->arch.data_a_l1) && (mod->arch.data_a_l1->sh_addr))
- l1_data_sram_free((void*)mod->arch.data_a_l1->sh_addr);
+ l1_data_sram_free((void *)mod->arch.data_a_l1->sh_addr);
if ((mod->arch.bss_a_l1) && (mod->arch.bss_a_l1->sh_addr))
- l1_data_sram_free((void*)mod->arch.bss_a_l1->sh_addr);
+ l1_data_sram_free((void *)mod->arch.bss_a_l1->sh_addr);
if ((mod->arch.data_b_l1) && (mod->arch.data_b_l1->sh_addr))
- l1_data_B_sram_free((void*)mod->arch.data_b_l1->sh_addr);
+ l1_data_B_sram_free((void *)mod->arch.data_b_l1->sh_addr);
if ((mod->arch.bss_b_l1) && (mod->arch.bss_b_l1->sh_addr))
- l1_data_B_sram_free((void*)mod->arch.bss_b_l1->sh_addr);
+ l1_data_B_sram_free((void *)mod->arch.bss_b_l1->sh_addr);
}
#include <linux/unistd.h>
#include <linux/user.h>
#include <linux/a.out.h>
+#include <linux/uaccess.h>
#include <asm/blackfin.h>
-#include <asm/uaccess.h>
+#include <asm/fixed_code.h>
#define LED_ON 0
#define LED_OFF 1
printk(KERN_NOTICE "R4: %08lx R5: %08lx R6: %08lx R7: %08lx\n",
regs->r4, regs->r5, regs->r6, regs->r7);
- if (!(regs->ipend))
- printk("USP: %08lx\n", rdusp());
+ if (!regs->ipend)
+ printk(KERN_NOTICE "USP: %08lx\n", rdusp());
}
/* Fill in the fpu structure for a core dump. */
goto out;
error = do_execve(filename, argv, envp, regs);
putname(filename);
- out:
+ out:
unlock_kernel();
return error;
}
return 0;
}
+void finish_atomic_sections (struct pt_regs *regs)
+{
+ if (regs->pc < ATOMIC_SEQS_START || regs->pc >= ATOMIC_SEQS_END)
+ return;
+
+ switch (regs->pc) {
+ case ATOMIC_XCHG32 + 2:
+ put_user(regs->r1, (int *)regs->p0);
+ regs->pc += 2;
+ break;
+
+ case ATOMIC_CAS32 + 2:
+ case ATOMIC_CAS32 + 4:
+ if (regs->r0 == regs->r1)
+ put_user(regs->r2, (int *)regs->p0);
+ regs->pc = ATOMIC_CAS32 + 8;
+ break;
+ case ATOMIC_CAS32 + 6:
+ put_user(regs->r2, (int *)regs->p0);
+ regs->pc += 2;
+ break;
+
+ case ATOMIC_ADD32 + 2:
+ regs->r0 = regs->r1 + regs->r0;
+ /* fall through */
+ case ATOMIC_ADD32 + 4:
+ put_user(regs->r0, (int *)regs->p0);
+ regs->pc = ATOMIC_ADD32 + 6;
+ break;
+
+ case ATOMIC_SUB32 + 2:
+ regs->r0 = regs->r1 - regs->r0;
+ /* fall through */
+ case ATOMIC_SUB32 + 4:
+ put_user(regs->r0, (int *)regs->p0);
+ regs->pc = ATOMIC_SUB32 + 6;
+ break;
+
+ case ATOMIC_IOR32 + 2:
+ regs->r0 = regs->r1 | regs->r0;
+ /* fall through */
+ case ATOMIC_IOR32 + 4:
+ put_user(regs->r0, (int *)regs->p0);
+ regs->pc = ATOMIC_IOR32 + 6;
+ break;
+
+ case ATOMIC_AND32 + 2:
+ regs->r0 = regs->r1 & regs->r0;
+ /* fall through */
+ case ATOMIC_AND32 + 4:
+ put_user(regs->r0, (int *)regs->p0);
+ regs->pc = ATOMIC_AND32 + 6;
+ break;
+
+ case ATOMIC_XOR32 + 2:
+ regs->r0 = regs->r1 ^ regs->r0;
+ /* fall through */
+ case ATOMIC_XOR32 + 4:
+ put_user(regs->r0, (int *)regs->p0);
+ regs->pc = ATOMIC_XOR32 + 6;
+ break;
+ }
+}
+
#if defined(CONFIG_ACCESS_CHECK)
int _access_ok(unsigned long addr, unsigned long size)
{
if (addr > (addr + size))
return 0;
- if (segment_eq(get_fs(),KERNEL_DS))
+ if (segment_eq(get_fs(), KERNEL_DS))
return 1;
#ifdef CONFIG_MTD_UCLINUX
if (addr >= memory_start && (addr + size) <= memory_end)
#include <linux/ptrace.h>
#include <linux/user.h>
#include <linux/signal.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/system.h>
static inline int
put_reg(struct task_struct *task, int regno, unsigned long data)
{
- char * reg_ptr;
+ char *reg_ptr;
struct pt_regs *regs =
(struct pt_regs *)((unsigned long)task_stack_page(task) +
break;
default:
if (regno <= 216)
- *(long *)(reg_ptr + regno) = data;
+ *(long *)(reg_ptr + regno) = data;
}
return 0;
}
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
#include <asm/cplbinit.h>
+#include <asm/fixed_code.h>
u16 _bfin_swrst;
char __initdata command_line[COMMAND_LINE_SIZE];
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
-static void generate_cpl_tables(void);
-#endif
-
void __init bf53x_cache_init(void)
{
#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
/* this give a chance to get printk() working before crash. */
#endif
+ printk(KERN_INFO "Hardware Trace ");
+ if (bfin_read_TBUFCTL() & 0x1 )
+ printk("Active ");
+ else
+ printk("Off ");
+ if (bfin_read_TBUFCTL() & 0x2)
+ printk("and Enabled\n");
+ else
+ printk("and Disabled\n");
+
+
#if defined(CONFIG_CHR_DEV_FLASH) || defined(CONFIG_BLK_DEV_FLASH)
/* we need to initialize the Flashrom device here since we might
* do things with flash early on in the boot
, _stext, _etext,
__start_rodata, __end_rodata,
_sdata, _edata,
- (void*)&init_thread_union, (void*)((int)(&init_thread_union) + 0x2000),
+ (void *)&init_thread_union, (void *)((int)(&init_thread_union) + 0x2000),
__init_begin, __init_end,
__bss_start, __bss_stop,
- (void*)_ramstart, (void*)memory_end
+ (void *)_ramstart, (void *)memory_end
#ifdef CONFIG_MTD_UCLINUX
- , (void*)memory_mtd_start, (void*)(memory_mtd_start + mtd_size)
+ , (void *)memory_mtd_start, (void *)(memory_mtd_start + mtd_size)
#endif
#if DMA_UNCACHED_REGION > 0
- , (void*)(_ramend - DMA_UNCACHED_REGION), (void*)(_ramend)
+ , (void *)(_ramend - DMA_UNCACHED_REGION), (void *)(_ramend)
#endif
);
/* check the size of the l1 area */
l1_length = _etext_l1 - _stext_l1;
if (l1_length > L1_CODE_LENGTH)
- panic("L1 memory overflow\n");
+ panic("L1 code memory overflow\n");
l1_length = _ebss_l1 - _sdata_l1;
if (l1_length > L1_DATA_A_LENGTH)
- panic("L1 memory overflow\n");
+ panic("L1 data memory overflow\n");
#ifdef BF561_FAMILY
_bfin_swrst = bfin_read_SICA_SWRST();
_bfin_swrst = bfin_read_SWRST();
#endif
- bf53x_cache_init();
+ /* Copy atomic sequences to their fixed location, and sanity check that
+ these locations are the ones that we advertise to userspace. */
+ memcpy((void *)FIXED_CODE_START, &fixed_code_start,
+ FIXED_CODE_END - FIXED_CODE_START);
+ BUG_ON((char *)&sigreturn_stub - (char *)&fixed_code_start
+ != SIGRETURN_STUB - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_xchg32 - (char *)&fixed_code_start
+ != ATOMIC_XCHG32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_cas32 - (char *)&fixed_code_start
+ != ATOMIC_CAS32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_add32 - (char *)&fixed_code_start
+ != ATOMIC_ADD32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_sub32 - (char *)&fixed_code_start
+ != ATOMIC_SUB32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_ior32 - (char *)&fixed_code_start
+ != ATOMIC_IOR32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_and32 - (char *)&fixed_code_start
+ != ATOMIC_AND32 - FIXED_CODE_START);
+ BUG_ON((char *)&atomic_xor32 - (char *)&fixed_code_start
+ != ATOMIC_XOR32 - FIXED_CODE_START);
- printk(KERN_INFO "Hardware Trace Enabled\n");
- bfin_write_TBUFCTL(0x03);
+ bf53x_cache_init();
}
static int __init topology_init(void)
subsys_initcall(topology_init);
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
-static u16 __init lock_kernel_check(u32 start, u32 end)
-{
- if ((start <= (u32) _stext && end >= (u32) _end)
- || (start >= (u32) _stext && end <= (u32) _end))
- return IN_KERNEL;
- return 0;
-}
-
-static unsigned short __init
-fill_cplbtab(struct cplb_tab *table,
- unsigned long start, unsigned long end,
- unsigned long block_size, unsigned long cplb_data)
-{
- int i;
-
- switch (block_size) {
- case SIZE_4M:
- i = 3;
- break;
- case SIZE_1M:
- i = 2;
- break;
- case SIZE_4K:
- i = 1;
- break;
- case SIZE_1K:
- default:
- i = 0;
- break;
- }
-
- cplb_data = (cplb_data & ~(3 << 16)) | (i << 16);
-
- while ((start < end) && (table->pos < table->size)) {
-
- table->tab[table->pos++] = start;
-
- if (lock_kernel_check(start, start + block_size) == IN_KERNEL)
- table->tab[table->pos++] =
- cplb_data | CPLB_LOCK | CPLB_DIRTY;
- else
- table->tab[table->pos++] = cplb_data;
-
- start += block_size;
- }
- return 0;
-}
-
-static unsigned short __init
-close_cplbtab(struct cplb_tab *table)
-{
-
- while (table->pos < table->size) {
-
- table->tab[table->pos++] = 0;
- table->tab[table->pos++] = 0; /* !CPLB_VALID */
- }
- return 0;
-}
-
-/* helper function */
-static void __fill_code_cplbtab(struct cplb_tab *t, int i,
- u32 a_start, u32 a_end)
-{
- if (cplb_data[i].psize) {
- fill_cplbtab(t,
- cplb_data[i].start,
- cplb_data[i].end,
- cplb_data[i].psize,
- cplb_data[i].i_conf);
- } else {
-#if (defined(CONFIG_BLKFIN_CACHE) && defined(ANOMALY_05000263))
- if (i == SDRAM_KERN) {
- fill_cplbtab(t,
- cplb_data[i].start,
- cplb_data[i].end,
- SIZE_4M,
- cplb_data[i].i_conf);
- } else {
-#endif
- fill_cplbtab(t,
- cplb_data[i].start,
- a_start,
- SIZE_1M,
- cplb_data[i].i_conf);
- fill_cplbtab(t,
- a_start,
- a_end,
- SIZE_4M,
- cplb_data[i].i_conf);
- fill_cplbtab(t, a_end,
- cplb_data[i].end,
- SIZE_1M,
- cplb_data[i].i_conf);
- }
- }
-}
-
-static void __fill_data_cplbtab(struct cplb_tab *t, int i,
- u32 a_start, u32 a_end)
-{
- if (cplb_data[i].psize) {
- fill_cplbtab(t,
- cplb_data[i].start,
- cplb_data[i].end,
- cplb_data[i].psize,
- cplb_data[i].d_conf);
- } else {
- fill_cplbtab(t,
- cplb_data[i].start,
- a_start, SIZE_1M,
- cplb_data[i].d_conf);
- fill_cplbtab(t, a_start,
- a_end, SIZE_4M,
- cplb_data[i].d_conf);
- fill_cplbtab(t, a_end,
- cplb_data[i].end,
- SIZE_1M,
- cplb_data[i].d_conf);
- }
-}
-static void __init generate_cpl_tables(void)
-{
-
- u16 i, j, process;
- u32 a_start, a_end, as, ae, as_1m;
-
- struct cplb_tab *t_i = NULL;
- struct cplb_tab *t_d = NULL;
- struct s_cplb cplb;
-
- cplb.init_i.size = MAX_CPLBS;
- cplb.init_d.size = MAX_CPLBS;
- cplb.switch_i.size = MAX_SWITCH_I_CPLBS;
- cplb.switch_d.size = MAX_SWITCH_D_CPLBS;
-
- cplb.init_i.pos = 0;
- cplb.init_d.pos = 0;
- cplb.switch_i.pos = 0;
- cplb.switch_d.pos = 0;
-
- cplb.init_i.tab = icplb_table;
- cplb.init_d.tab = dcplb_table;
- cplb.switch_i.tab = ipdt_table;
- cplb.switch_d.tab = dpdt_table;
-
- cplb_data[SDRAM_KERN].end = memory_end;
-
-#ifdef CONFIG_MTD_UCLINUX
- cplb_data[SDRAM_RAM_MTD].start = memory_mtd_start;
- cplb_data[SDRAM_RAM_MTD].end = memory_mtd_start + mtd_size;
- cplb_data[SDRAM_RAM_MTD].valid = mtd_size > 0;
-# if defined(CONFIG_ROMFS_FS)
- cplb_data[SDRAM_RAM_MTD].attr |= I_CPLB;
-
- /*
- * The ROMFS_FS size is often not multiple of 1MB.
- * This can cause multiple CPLB sets covering the same memory area.
- * This will then cause multiple CPLB hit exceptions.
- * Workaround: We ensure a contiguous memory area by extending the kernel
- * memory section over the mtd section.
- * For ROMFS_FS memory must be covered with ICPLBs anyways.
- * So there is no difference between kernel and mtd memory setup.
- */
-
- cplb_data[SDRAM_KERN].end = memory_mtd_start + mtd_size;;
- cplb_data[SDRAM_RAM_MTD].valid = 0;
-
-# endif
-#else
- cplb_data[SDRAM_RAM_MTD].valid = 0;
-#endif
-
- cplb_data[SDRAM_DMAZ].start = _ramend - DMA_UNCACHED_REGION;
- cplb_data[SDRAM_DMAZ].end = _ramend;
-
- cplb_data[RES_MEM].start = _ramend;
- cplb_data[RES_MEM].end = physical_mem_end;
-
- if (reserved_mem_dcache_on)
- cplb_data[RES_MEM].d_conf = SDRAM_DGENERIC;
- else
- cplb_data[RES_MEM].d_conf = SDRAM_DNON_CHBL;
-
- if (reserved_mem_icache_on)
- cplb_data[RES_MEM].i_conf = SDRAM_IGENERIC;
- else
- cplb_data[RES_MEM].i_conf = SDRAM_INON_CHBL;
-
- for (i = ZERO_P; i <= L2_MEM; i++) {
- if (!cplb_data[i].valid)
- continue;
-
- as_1m = cplb_data[i].start % SIZE_1M;
-
- /*
- * We need to make sure all sections are properly 1M aligned
- * However between Kernel Memory and the Kernel mtd section,
- * depending on the rootfs size, there can be overlapping
- * memory areas.
- */
-
- if (as_1m && i != L1I_MEM && i != L1D_MEM) {
-#ifdef CONFIG_MTD_UCLINUX
- if (i == SDRAM_RAM_MTD) {
- if ((cplb_data[SDRAM_KERN].end + 1) >
- cplb_data[SDRAM_RAM_MTD].start)
- cplb_data[SDRAM_RAM_MTD].start =
- (cplb_data[i].start &
- (-2*SIZE_1M)) + SIZE_1M;
- else
- cplb_data[SDRAM_RAM_MTD].start =
- (cplb_data[i].start &
- (-2*SIZE_1M));
- } else
-#endif
- printk(KERN_WARNING
- "Unaligned Start of %s at 0x%X\n",
- cplb_data[i].name, cplb_data[i].start);
- }
-
- as = cplb_data[i].start % SIZE_4M;
- ae = cplb_data[i].end % SIZE_4M;
-
- if (as)
- a_start = cplb_data[i].start + (SIZE_4M - (as));
- else
- a_start = cplb_data[i].start;
-
- a_end = cplb_data[i].end - ae;
-
- for (j = INITIAL_T; j <= SWITCH_T; j++) {
-
- switch (j) {
- case INITIAL_T:
- if (cplb_data[i].attr & INITIAL_T) {
- t_i = &cplb.init_i;
- t_d = &cplb.init_d;
- process = 1;
- } else
- process = 0;
- break;
- case SWITCH_T:
- if (cplb_data[i].attr & SWITCH_T) {
- t_i = &cplb.switch_i;
- t_d = &cplb.switch_d;
- process = 1;
- } else
- process = 0;
- break;
- default:
- process = 0;
- break;
- }
-
- if (!process)
- continue;
- if (cplb_data[i].attr & I_CPLB)
- __fill_code_cplbtab(t_i, i, a_start, a_end);
-
- if (cplb_data[i].attr & D_CPLB)
- __fill_data_cplbtab(t_d, i, a_start, a_end);
- }
- }
-
-/* close tables */
-
- close_cplbtab(&cplb.init_i);
- close_cplbtab(&cplb.init_d);
-
- cplb.init_i.tab[cplb.init_i.pos] = -1;
- cplb.init_d.tab[cplb.init_d.pos] = -1;
- cplb.switch_i.tab[cplb.switch_i.pos] = -1;
- cplb.switch_d.tab[cplb.switch_d.pos] = -1;
-
-}
-
-#endif
-
static u_long get_vco(void)
{
u_long msel;
return get_vco() / ssel;
return get_vco() >> csel;
}
-
EXPORT_SYMBOL(get_cclk);
/* Get the System clock */
return get_vco() / ssel;
}
-
EXPORT_SYMBOL(get_sclk);
/*
seq_printf(m, "D-CACHE:\tOFF\n");
- switch(bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
- case ACACHE_BSRAM:
- seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n");
- dcache_size = 16;
- dsup_banks = 1;
- break;
- case ACACHE_BCACHE:
- seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n");
- dcache_size = 32;
- dsup_banks = 2;
- break;
- case ASRAM_BSRAM:
- seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n");
- dcache_size = 0;
- dsup_banks = 0;
- break;
- default:
+ switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) {
+ case ACACHE_BSRAM:
+ seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tSRAM\n");
+ dcache_size = 16;
+ dsup_banks = 1;
+ break;
+ case ACACHE_BCACHE:
+ seq_printf(m, "DBANK-A:\tCACHE\n" "DBANK-B:\tCACHE\n");
+ dcache_size = 32;
+ dsup_banks = 2;
+ break;
+ case ASRAM_BSRAM:
+ seq_printf(m, "DBANK-A:\tSRAM\n" "DBANK-B:\tSRAM\n");
+ dcache_size = 0;
+ dsup_banks = 0;
+ break;
+ default:
break;
}
#include <linux/personality.h>
#include <linux/binfmts.h>
#include <linux/freezer.h>
+#include <linux/uaccess.h>
-#include <asm/uaccess.h>
#include <asm/cacheflush.h>
#include <asm/ucontext.h>
return r0;
- badframe:
+ badframe:
force_sig(SIGSEGV, current);
return 0;
}
return 0;
- give_sigsegv:
+ give_sigsegv:
if (sig == SIGSEGV)
ka->sa.sa_handler = SIG_DFL;
force_sig(SIGSEGV, current);
}
/* fallthrough */
case -ERESTARTNOINTR:
- do_restart:
+ do_restart:
regs->p0 = regs->orig_p0;
regs->r0 = regs->orig_r0;
regs->pc -= 2;
return;
}
-no_signal:
+ no_signal:
/* Did we come from a system call? */
if (regs->orig_p0 >= 0)
/* Restart the system call - no handlers present */
#include <linux/syscalls.h>
#include <linux/mman.h>
#include <linux/file.h>
+#include <linux/uaccess.h>
+#include <linux/ipc.h>
+#include <linux/unistd.h>
#include <asm/cacheflush.h>
-#include <asm/uaccess.h>
-#include <asm/ipc.h>
#include <asm/dma.h>
-#include <asm/unistd.h>
/*
* sys_pipe() is the normal C calling standard for creating
if (file)
fput(file);
- out:
+ out:
return error;
}
static inline void do_leds(void)
{
static unsigned int count = 50;
- static int flag = 0;
+ static int flag;
unsigned short tmp = 0;
if (--count == 0) {
irqreturn_t timer_interrupt(int irq, void *dummy)
{
/* last time the cmos clock got updated */
- static long last_rtc_update = 0;
+ static long last_rtc_update;
write_seqlock(&xtime_lock);
* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kallsyms.h>
#include <asm/traps.h>
#include <asm/cacheflush.h>
#include <asm/blackfin.h>
-#include <asm/uaccess.h>
#include <asm/irq_handler.h>
-#include <linux/interrupt.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
+#include <asm/trace.h>
#ifdef CONFIG_KGDB
# include <linux/debugger.h>
if (!modname)
modname = delim = "";
return printk("<0x%p> { %s%s%s%s + 0x%lx }",
- (void*)address, delim, modname, delim, symname,
+ (void *)address, delim, modname, delim, symname,
(unsigned long)offset);
}
write_unlock_irq(&tasklist_lock);
return printk("<0x%p> [ %s + 0x%lx ]",
- (void*)address, name, offset);
+ (void *)address, name, offset);
}
vml = vml->next;
write_unlock_irq(&tasklist_lock);
/* we were unable to find this address anywhere */
- return printk("[<0x%p>]", (void*)address);
+ return printk("[<0x%p>]", (void *)address);
}
-#define trace_buffer_save(x) \
- do { \
- (x) = bfin_read_TBUFCTL(); \
- bfin_write_TBUFCTL((x) & ~TBUFEN); \
- } while (0)
-#define trace_buffer_restore(x) \
- do { \
- bfin_write_TBUFCTL((x)); \
- } while (0)
-
asmlinkage void trap_c(struct pt_regs *fp)
{
int j, sig = 0;
#else
/* 0x02 - User Defined, Caught by default */
#endif
- /* 0x03 - Atomic test and set */
+ /* 0x03 - User Defined, userspace stack overflow */
case VEC_EXCPT03:
info.si_code = SEGV_STACKFLOW;
sig = SIGSEGV;
printk(KERN_EMERG EXC_0x03);
CHK_DEBUGGER_TRAP();
break;
- /* 0x04 - spinlock - handled by _ex_spinlock,
- getting here is an error */
+ /* 0x04 - User Defined, Caught by default */
/* 0x05 - User Defined, Caught by default */
/* 0x06 - User Defined, Caught by default */
/* 0x07 - User Defined, Caught by default */
printk(KERN_EMERG "TEXT = 0x%p-0x%p DATA = 0x%p-0x%p\n"
KERN_EMERG "BSS = 0x%p-0x%p USER-STACK = 0x%p\n"
KERN_EMERG "\n",
- (void*)current->mm->start_code,
- (void*)current->mm->end_code,
- (void*)current->mm->start_data,
- (void*)current->mm->end_data,
- (void*)current->mm->end_data,
- (void*)current->mm->brk,
- (void*)current->mm->start_stack);
+ (void *)current->mm->start_code,
+ (void *)current->mm->end_code,
+ (void *)current->mm->start_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->end_data,
+ (void *)current->mm->brk,
+ (void *)current->mm->start_stack);
}
printk(KERN_EMERG "return address: [0x%p]; contents of:", retaddr);
- if (retaddr != 0 && retaddr <= (void*)physical_mem_end
+ if (retaddr != 0 && retaddr <= (void *)physical_mem_end
#if L1_CODE_LENGTH != 0
/* FIXME: Copy the code out of L1 Instruction SRAM through dma
memcpy. */
- && !(retaddr >= (void*)L1_CODE_START
- && retaddr < (void*)(L1_CODE_START + L1_CODE_LENGTH))
+ && !(retaddr >= (void *)L1_CODE_START
+ && retaddr < (void *)(L1_CODE_START + L1_CODE_LENGTH))
#endif
) {
int i = ((unsigned int)retaddr & 0xFFFFFFF0) - 32;
unsigned short x = 0;
- for (; i < ((unsigned int)retaddr & 0xFFFFFFF0 ) + 32 ;
- i += 2) {
- if ( !(i & 0xF) )
+ for (; i < ((unsigned int)retaddr & 0xFFFFFFF0) + 32; i += 2) {
+ if (!(i & 0xF))
printk(KERN_EMERG "\n" KERN_EMERG
"0x%08x: ", i);
" The rest of this error"
" is meanless\n");
#endif
- if ( i == (unsigned int)retaddr )
+ if (i == (unsigned int)retaddr)
printk("[%04x]", x);
else
printk(" %04x ", x);
break;
}
- printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void*)bfin_read_DCPLB_FAULT_ADDR());
- printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void*)bfin_read_ICPLB_FAULT_ADDR());
+ printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", (void *)bfin_read_DCPLB_FAULT_ADDR());
+ printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", (void *)bfin_read_ICPLB_FAULT_ADDR());
dump_bfin_regs(fp, (void *)fp->retx);
dump_stack();
panic("Unrecoverable event\n");
#include <asm-generic/vmlinux.lds.h>
#include <asm/mem_map.h>
+#include <asm/page.h>
OUTPUT_FORMAT("elf32-bfin")
ENTRY(__start)
.data :
{
+ . = ALIGN(PAGE_SIZE);
__sdata = .;
- . = ALIGN(0x2000);
*(.data.init_task)
DATA_DATA
CONSTRUCTORS
. = ALIGN(32);
*(.data.cacheline_aligned)
- . = ALIGN(0x2000);
+ . = ALIGN(PAGE_SIZE);
__edata = .;
}
+ . = ALIGN(PAGE_SIZE);
___init_begin = .;
.init :
{
- . = ALIGN(4096);
__sinittext = .;
*(.init.text)
__einittext = .;
__ebss_b_l1 = .;
}
- ___init_end = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
+ . = LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1);
+ ___init_end = ALIGN(PAGE_SIZE);
- .bss LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1) :
+ .bss ___init_end :
{
. = ALIGN(4);
___bss_start = .;
int strcmp(const char *dest, const char *src)
{
- return __inline_strcmp(dest, src);
+ return __inline_strcmp(dest, src);
}
-
char *strcpy(char *dest, const char *src)
{
- return __inline_strcpy(dest, src);
+ return __inline_strcpy(dest, src);
}
-
int strncmp(const char *cs, const char *ct, size_t count)
{
- return __inline_strncmp(cs, ct, count);
+ return __inline_strncmp(cs, ct, count);
}
-
char *strncpy(char *dest, const char *src, size_t n)
{
- return __inline_strncpy(dest, src, n);
+ return __inline_strncpy(dest, src, n);
}
-
extra-y := head.o
-obj-y := ints-priority.o
+obj-y := ints-priority.o dma.o
-obj-$(CONFIG_CPU_FREQ_BF533) += cpu.o
+obj-$(CONFIG_CPU_FREQ) += cpu.o
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
.platform_data = &bfin_spi_flash_data,
.controller_data = &spi_flash_chip_info,
.mode = SPI_MODE_3,
- },{
+ }, {
.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
.max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
.bus_num = 1, /* Framework bus number */
.start = 0x20200300,
.end = 0x20200300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF0,
.end = IRQ_PF0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20308000,
.end = 0x20308000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20308004,
.end = 0x20308004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ,
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.start = 0x20310300,
.end = 0x20310300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF9,
.end = IRQ_PF9,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
/*
* Name the Board for the /proc/cpuinfo
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF10,
.end = IRQ_PF10,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
#if defined(CONFIG_PBX)
{
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
int i;
struct cpufreq_freqs freqs;
- if (cpufreq_frequency_table_target
- (policy, bf533_freq_table, target_freq, relation, &index))
+ if (cpufreq_frequency_table_target(policy, bf533_freq_table, target_freq, relation, &index))
return -EINVAL;
cclk_mhz = bf533_freq_table[index].frequency;
vco_mhz = bf533_freq_table[index].index;
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf533/dma.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+ (struct dma_register *) DMA0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA7_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+
+int channel2irq(unsigned int channel)
+{
+ int ret_irq = -1;
+
+ switch (channel) {
+ case CH_PPI:
+ ret_irq = IRQ_PPI;
+ break;
+
+ case CH_SPORT0_RX:
+ ret_irq = IRQ_SPORT0_RX;
+ break;
+
+ case CH_SPORT0_TX:
+ ret_irq = IRQ_SPORT0_TX;
+ break;
+
+ case CH_SPORT1_RX:
+ ret_irq = IRQ_SPORT1_RX;
+ break;
+
+ case CH_SPORT1_TX:
+ ret_irq = IRQ_SPORT1_TX;
+ break;
+
+ case CH_SPI:
+ ret_irq = IRQ_SPI;
+ break;
+
+ case CH_UART_RX:
+ ret_irq = IRQ_UART_RX;
+ break;
+
+ case CH_UART_TX:
+ ret_irq = IRQ_UART_TX;
+ break;
+
+ case CH_MEM_STREAM0_SRC:
+ case CH_MEM_STREAM0_DEST:
+ ret_irq = IRQ_MEM_DMA0;
+ break;
+
+ case CH_MEM_STREAM1_SRC:
+ case CH_MEM_STREAM1_DEST:
+ ret_irq = IRQ_MEM_DMA1;
+ break;
+ }
+ return ret_irq;
+}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
+#include <asm/trace.h>
#if CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach/mem_init.h>
#endif
M2 = r0;
M3 = r0;
+ trace_buffer_start(p0,r0);
+ P0 = R1;
+ R0 = R1;
+
#if CONFIG_DEBUG_KERNEL_START
/*
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
void program_IAR(void)
{
extra-y := head.o
-obj-y := ints-priority.o
+obj-y := ints-priority.o dma.o
obj-$(CONFIG_CPU_FREQ) += cpu.o
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
.start = 0x20200300,
.end = 0x20200300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF14,
.end = IRQ_PF14,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20308000,
.end = 0x20308000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20308004,
.end = 0x20308004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PG15,
.end = IRQ_PG15,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20200000,
.end = 0x20200000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
#include <linux/module.h>
#include <asm/blackfin.h>
-#if defined(CONFIG_GENERIC_BOARD) \
- || defined(CONFIG_BFIN537_STAMP)
+#if defined(CONFIG_GENERIC_BOARD) || defined(CONFIG_BFIN537_STAMP)
/*
* Currently the MAC address is saved in Flash by U-Boot
*/
void get_bf537_ether_addr(char *addr)
{
- printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n",__FILE__);
+ printk(KERN_WARNING "%s: No valid Ethernet MAC address found\n", __FILE__);
}
#endif
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
-#include <asm/bfin5xx_spi.h>
+#include <linux/irq.h>
#include <linux/usb_sl811.h>
+#include <asm/bfin5xx_spi.h>
/*
* Name the Board for the /proc/cpuinfo
.start = 0x20310000, /* IO PORT */
.end = 0x20312000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTA,
.end = IRQ_PROG_INTA,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = 6, /* Card Detect PF6 */
.end = 6,
.flags = IORESOURCE_IRQ,
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
.start = 0x20340000,
.end = 0x20340000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20340004,
.end = 0x20340004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTA,
.end = IRQ_PROG_INTA,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
.start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
.end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTA,
.end = IRQ_PROG_INTA,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
.start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
.end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO,
.flags = IORESOURCE_IRQ,
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
#include <linux/usb_sl811.h>
.start = 0x20310000, /* IO PORT */
.end = 0x20312000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = 6, /* Card Detect PF6 */
.end = 6,
.flags = IORESOURCE_IRQ,
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.start = 0x20340000,
.end = 0x20340000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20340004,
.end = 0x20340004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_SL811_BFIN_IRQ,
.end = CONFIG_USB_SL811_BFIN_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
};
#endif
-#if defined(CONFIG_PBX)
-static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
- .ctl_reg = 0x4, /* send zero */
- .enable_dma = 0,
- .bits_per_word = 8,
- .cs_change_per_word = 1,
-};
-#endif
-
-
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
.cs_change_per_word = 1,
.mode = SPI_MODE_3,
},
#endif
-#if defined(CONFIG_PBX)
- {
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
- .controller_data= &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
- {
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
- .controller_data= &spi_si3xxx_chip_info,
- .mode = SPI_MODE_3,
- },
-#endif
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
{
.modalias = "ad7877",
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/usb_isp1362.h>
#endif
-#include <asm/irq.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
-#include <asm/bfin5xx_spi.h>
#include <linux/usb_sl811.h>
-
+#include <asm/bfin5xx_spi.h>
#include <linux/spi/ad7877.h>
/*
int __init bfin_isp1761_init(void)
{
- unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices);
+ unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
.start = 0x20310000, /* IO PORT */
.end = 0x20312000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20311000, /* Attribute Memory */
.end = 0x20311FFF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF4,
.end = IRQ_PF4,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },{
+ }, {
.start = 6, /* Card Detect PF6 */
.end = 6,
.flags = IORESOURCE_IRQ,
.start = 0x20300300,
.end = 0x20300300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
};
#endif
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+ [0] = {
+ .start = 0x203FB800,
+ .end = 0x203FB800 + 8,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PF9,
+ .end = IRQ_PF9,
+ .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE),
+ },
+};
+
+static struct platform_device dm9000_device = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(dm9000_resources),
+ .resource = dm9000_resources,
+};
+#endif
+
#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE)
static struct resource sl811_hcd_resources[] = {
{
.start = 0x20340000,
.end = 0x20340000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20340004,
.end = 0x20340004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_SL811_BFIN_IRQ,
.end = CONFIG_USB_SL811_BFIN_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20360000,
.end = 0x20360000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x20360004,
.end = 0x20360004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x20300000,
.end = 0x20300000 + 0x100,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF7,
.end = IRQ_PF7,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
-// .cs_change_per_word = 1,
.enable_dma = 0,
.bits_per_word = 16,
};
#endif
#if defined(CONFIG_PBX)
{
- .modalias = "fxs-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 3,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxs-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 3,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
{
- .modalias = "fxo-spi",
- .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
- .bus_num = 1,
- .chip_select = 2,
- .controller_data= &spi_si3xxx_chip_info,
+ .modalias = "fxo-spi",
+ .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
+ .bus_num = 1,
+ .chip_select = 2,
+ .controller_data = &spi_si3xxx_chip_info,
.mode = SPI_MODE_3,
},
#endif
.start = 0xFFC00400,
.end = 0xFFC004FF,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0xFFC02000,
.end = 0xFFC020FF,
.flags = IORESOURCE_MEM,
&smc91x_device,
#endif
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+ &dm9000_device,
+#endif
+
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
&bfin_mac_device,
#endif
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf537/dma.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+ (struct dma_register *) DMA0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA7_NEXT_DESC_PTR,
+ (struct dma_register *) DMA8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA11_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+};
+
+int channel2irq(unsigned int channel)
+{
+ int ret_irq = -1;
+
+ switch (channel) {
+ case CH_PPI:
+ ret_irq = IRQ_PPI;
+ break;
+
+ case CH_EMAC_RX:
+ ret_irq = IRQ_MAC_RX;
+ break;
+
+ case CH_EMAC_TX:
+ ret_irq = IRQ_MAC_TX;
+ break;
+
+ case CH_UART1_RX:
+ ret_irq = IRQ_UART1_RX;
+ break;
+
+ case CH_UART1_TX:
+ ret_irq = IRQ_UART1_TX;
+ break;
+
+ case CH_SPORT0_RX:
+ ret_irq = IRQ_SPORT0_RX;
+ break;
+
+ case CH_SPORT0_TX:
+ ret_irq = IRQ_SPORT0_TX;
+ break;
+
+ case CH_SPORT1_RX:
+ ret_irq = IRQ_SPORT1_RX;
+ break;
+
+ case CH_SPORT1_TX:
+ ret_irq = IRQ_SPORT1_TX;
+ break;
+
+ case CH_SPI:
+ ret_irq = IRQ_SPI;
+ break;
+
+ case CH_UART_RX:
+ ret_irq = IRQ_UART_RX;
+ break;
+
+ case CH_UART_TX:
+ ret_irq = IRQ_UART_TX;
+ break;
+
+ case CH_MEM_STREAM0_SRC:
+ case CH_MEM_STREAM0_DEST:
+ ret_irq = IRQ_MEM_DMA0;
+ break;
+
+ case CH_MEM_STREAM1_SRC:
+ case CH_MEM_STREAM1_DEST:
+ ret_irq = IRQ_MEM_DMA1;
+ break;
+ }
+ return ret_irq;
+}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
+#include <asm/trace.h>
+
#if CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach/mem_init.h>
#endif
M2 = r0;
M3 = r0;
+ trace_buffer_start(p0,r0);
+ P0 = R1;
+ R0 = R1;
+
/* Turn off the icache */
p0.l = (IMEM_CONTROL & 0xFFFF);
p0.h = (IMEM_CONTROL >> 16);
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
void program_IAR(void)
{
--- /dev/null
+if (BF54x)
+
+menu "BF548 Specific Configuration"
+
+comment "Interrupt Priority Assignment"
+menu "Priority"
+
+config IRQ_PLL_WAKEUP
+ int "IRQ_PLL_WAKEUP"
+ default 7
+config IRQ_DMAC0_ERR
+ int "IRQ_DMAC0_ERR"
+ default 7
+config IRQ_EPPI0_ERR
+ int "IRQ_EPPI0_ERR"
+ default 7
+config IRQ_SPORT0_ERR
+ int "IRQ_SPORT0_ERR"
+ default 7
+config IRQ_SPORT1_ERR
+ int "IRQ_SPORT1_ERR"
+ default 7
+config IRQ_SPI0_ERR
+ int "IRQ_SPI0_ERR"
+ default 7
+config IRQ_UART0_ERR
+ int "IRQ_UART0_ERR"
+ default 7
+config IRQ_RTC
+ int "IRQ_RTC"
+ default 8
+config IRQ_EPPI0
+ int "IRQ_EPPI0"
+ default 8
+config IRQ_SPORT0_RX
+ int "IRQ_SPORT0_RX"
+ default 9
+config IRQ_SPORT0_TX
+ int "IRQ_SPORT0_TX"
+ default 9
+config IRQ_SPORT1_RX
+ int "IRQ_SPORT1_RX"
+ default 9
+config IRQ_SPORT1_TX
+ int "IRQ_SPORT1_TX"
+ default 9
+config IRQ_SPI0
+ int "IRQ_SPI0"
+ default 10
+config IRQ_UART0_RX
+ int "IRQ_UART0_RX"
+ default 10
+config IRQ_UART0_TX
+ int "IRQ_UART0_TX"
+ default 10
+config IRQ_TIMER8
+ int "IRQ_TIMER8"
+ default 11
+config IRQ_TIMER9
+ int "IRQ_TIMER9"
+ default 11
+config IRQ_TIMER10
+ int "IRQ_TIMER10"
+ default 11
+config IRQ_PINT0
+ int "IRQ_PINT0"
+ default 12
+config IRQ_PINT1
+ int "IRQ_PINT0"
+ default 12
+config IRQ_MDMAS0
+ int "IRQ_MDMAS0"
+ default 13
+config IRQ_MDMAS1
+ int "IRQ_DMDMAS1"
+ default 13
+config IRQ_WATCHDOG
+ int "IRQ_WATCHDOG"
+ default 13
+config IRQ_DMAC1_ERR
+ int "IRQ_DMAC1_ERR"
+ default 7
+config IRQ_SPORT2_ERR
+ int "IRQ_SPORT2_ERR"
+ default 7
+config IRQ_SPORT3_ERR
+ int "IRQ_SPORT3_ERR"
+ default 7
+config IRQ_MXVR_DATA
+ int "IRQ MXVR Data"
+ default 7
+config IRQ_SPI1_ERR
+ int "IRQ_SPI1_ERR"
+ default 7
+config IRQ_SPI2_ERR
+ int "IRQ_SPI2_ERR"
+ default 7
+config IRQ_UART1_ERR
+ int "IRQ_UART1_ERR"
+ default 7
+config IRQ_UART2_ERR
+ int "IRQ_UART2_ERR"
+ default 7
+config IRQ_CAN0_ERR
+ int "IRQ_CAN0_ERR"
+ default 7
+config IRQ_SPORT2_RX
+ int "IRQ_SPORT2_RX"
+ default 9
+config IRQ_SPORT2_TX
+ int "IRQ_SPORT2_TX"
+ default 9
+config IRQ_SPORT3_RX
+ int "IRQ_SPORT3_RX"
+ default 9
+config IRQ_SPORT3_TX
+ int "IRQ_SPORT3_TX"
+ default 9
+config IRQ_EPPI1
+ int "IRQ_EPPI1"
+ default 9
+config IRQ_EPPI2
+ int "IRQ_EPPI2"
+ default 9
+config IRQ_SPI1
+ int "IRQ_SPI1"
+ default 10
+config IRQ_SPI2
+ int "IRQ_SPI2"
+ default 10
+config IRQ_UART1_RX
+ int "IRQ_UART1_RX"
+ default 10
+config IRQ_UART1_TX
+ int "IRQ_UART1_TX"
+ default 10
+config IRQ_ATAPI_RX
+ int "IRQ_ATAPI_RX"
+ default 10
+config IRQ_ATAPI_TX
+ int "IRQ_ATAPI_TX"
+ default 10
+config IRQ_TWI0
+ int "IRQ_TWI0"
+ default 11
+config IRQ_TWI1
+ int "IRQ_TWI1"
+ default 11
+config IRQ_CAN0_RX
+ int "IRQ_CAN_RX"
+ default 11
+config IRQ_CAN0_TX
+ int "IRQ_CAN_TX"
+ default 11
+config IRQ_MDMAS2
+ int "IRQ_MDMAS2"
+ default 13
+config IRQ_MDMAS3
+ int "IRQ_DMMAS3"
+ default 13
+config IRQ_MXVR_ERR
+ int "IRQ_MXVR_ERR"
+ default 11
+config IRQ_MXVR_MSG
+ int "IRQ_MXVR_MSG"
+ default 11
+config IRQ_MXVR_PKT
+ int "IRQ_MXVR_PKT"
+ default 11
+config IRQ_EPPI1_ERR
+ int "IRQ_EPPI1_ERR"
+ default 7
+config IRQ_EPPI2_ERR
+ int "IRQ_EPPI2_ERR"
+ default 7
+config IRQ_UART3_ERR
+ int "IRQ_UART3_ERR"
+ default 7
+config IRQ_HOST_ERR
+ int "IRQ_HOST_ERR"
+ default 7
+config IRQ_PIXC_ERR
+ int "IRQ_PIXC_ERR"
+ default 7
+config IRQ_NFC_ERR
+ int "IRQ_NFC_ERR"
+ default 7
+config IRQ_ATAPI_ERR
+ int "IRQ_ATAPI_ERR"
+ default 7
+config IRQ_CAN1_ERR
+ int "IRQ_CAN1_ERR"
+ default 7
+config IRQ_HS_DMA_ERR
+ int "IRQ Handshake DMA Status"
+ default 7
+config IRQ_PIXC_IN0
+ int "IRQ PIXC IN0"
+ default 8
+config IRQ_PIXC_IN1
+ int "IRQ PIXC IN1"
+ default 8
+config IRQ_PIXC_OUT
+ int "IRQ PIXC OUT"
+ default 8
+config IRQ_SDH
+ int "IRQ SDH"
+ default 8
+config IRQ_CNT
+ int "IRQ CNT"
+ default 8
+config IRQ_KEY
+ int "IRQ KEY"
+ default 8
+config IRQ_CAN1_RX
+ int "IRQ CAN1 RX"
+ default 11
+config IRQ_CAN1_TX
+ int "IRQ_CAN1_TX"
+ default 11
+config IRQ_SDH_MASK0
+ int "IRQ_SDH_MASK0"
+ default 11
+config IRQ_SDH_MASK1
+ int "IRQ_SDH_MASK1"
+ default 11
+config IRQ_USB_INT0
+ int "IRQ USB INT0"
+ default 11
+config IRQ_USB_INT1
+ int "IRQ USB INT1"
+ default 11
+config IRQ_USB_INT2
+ int "IRQ USB INT2"
+ default 11
+config IRQ_USB_DMA
+ int "IRQ USB DMA"
+ default 11
+config IRQ_OTPSEC
+ int "IRQ OPTSEC"
+ default 11
+config IRQ_TIMER0
+ int "IRQ_TIMER0"
+ default 11
+config IRQ_TIMER1
+ int "IRQ_TIMER1"
+ default 11
+config IRQ_TIMER2
+ int "IRQ_TIMER2"
+ default 11
+config IRQ_TIMER3
+ int "IRQ_TIMER3"
+ default 11
+config IRQ_TIMER4
+ int "IRQ_TIMER4"
+ default 11
+config IRQ_TIMER5
+ int "IRQ_TIMER5"
+ default 11
+config IRQ_TIMER6
+ int "IRQ_TIMER6"
+ default 11
+config IRQ_TIMER7
+ int "IRQ_TIMER7"
+ default 11
+config IRQ_PINT2
+ int "IRQ_PIN2"
+ default 11
+config IRQ_PINT3
+ int "IRQ_PIN3"
+ default 11
+
+ help
+ Enter the priority numbers between 7-13 ONLY. Others are Reserved.
+ This applies to all the above. It is not recommended to assign the
+ highest priority number 7 to UART or any other device.
+
+endmenu
+
+comment "Pin Interrupt to Port Assignment"
+menu "Assignment"
+
+config PINTx_REASSIGN
+ bool "Reprogram PINT Assignment"
+ default n
+ help
+ The interrupt assignment registers controls the pin-to-interrupt
+ assignment in a byte-wide manner. Each option allows you to select
+ a set of pins (High/Low Byte) of an specific Port being mapped
+ to one of the four PIN Interrupts IRQ_PINTx.
+
+ You shouldn't change any of these unless you know exactly what you're doing.
+ Please consult the Blackfin BF54x Processor Hardware Reference Manual.
+
+config PINT0_ASSIGN
+ hex "PINT0_ASSIGN"
+ depends on PINTx_REASSIGN
+ default 0x00000101
+config PINT1_ASSIGN
+ hex "PINT1_ASSIGN"
+ depends on PINTx_REASSIGN
+ default 0x01010000
+config PINT2_ASSIGN
+ hex "PINT2_ASSIGN"
+ depends on PINTx_REASSIGN
+ default 0x00000101
+config PINT3_ASSIGN
+ hex "PINT3_ASSIGN"
+ depends on PINTx_REASSIGN
+ default 0x02020303
+
+endmenu
+
+endmenu
+
+endif
--- /dev/null
+#
+# arch/blackfin/mach-bf537/Makefile
+#
+
+extra-y := head.o
+
+obj-y := ints-priority.o dma.o gpio.o
+
+obj-$(CONFIG_CPU_FREQ) += cpu.o
--- /dev/null
+#
+# arch/blackfin/mach-bf548/boards/Makefile
+#
+
+obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf548/boards/ezkit.c
+ * Based on: arch/blackfin/mach-bf537/boards/ezkit.c
+ * Author: Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/bfin5xx_spi.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+char *bfin_board_name = "ADSP-BF548-EZKIT";
+
+/*
+ * Driver needs to know address, irq and flag pin.
+ */
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+ .name = "rtc-bfin",
+ .id = -1,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ {
+ .start = 0xFFC02000,
+ .end = 0xFFC020FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+ {
+ .start = 0xFFC02100,
+ .end = 0xFFC021FF,
+ .flags = IORESOURCE_MEM,
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+ {
+ .start = 0xFFC03100,
+ .end = 0xFFC031FF,
+ },
+#endif
+};
+
+static struct platform_device bfin_uart_device = {
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
+};
+#endif
+
+static struct platform_device *ezkit_devices[] __initdata = {
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+ &rtc_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+ &bfin_uart_device,
+#endif
+};
+
+static int __init stamp_init(void)
+{
+ printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
+ return 0;
+}
+
+arch_initcall(stamp_init);
--- /dev/null
+/****************************************************
+ * LED1 ---- PG6 LED2 ---- PG7 *
+ * LED3 ---- PG8 LED4 ---- PG9 *
+ * LED5 ---- PG10 LED6 ---- PG11 *
+ ****************************************************/
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+
+/* All functions in this file save the registers they uses.
+ So there is no need to save any registers before calling them. */
+
+ .text;
+
+/* Initialize LEDs. */
+
+ENTRY(_led_init)
+ LINK 0;
+ [--SP] = P0;
+ [--SP] = R0;
+ [--SP] = R1;
+ [--SP] = R2;
+ R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
+ R2 = ~R1;
+
+ P0.H = hi(PORTG_FER);
+ P0.L = lo(PORTG_FER);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 & R2;
+ W[P0] = R0.L;
+ SSYNC;
+
+ P0.H = hi(PORTG_DIR_SET);
+ P0.L = lo(PORTG_DIR_SET);
+ W[P0] = R1.L;
+ SSYNC;
+
+ P0.H = hi(PORTG_INEN);
+ P0.L = lo(PORTG_INEN);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 & R2;
+ W[P0] = R0.L;
+ SSYNC;
+
+ R2 = [SP++];
+ R1 = [SP++];
+ R0 = [SP++];
+ P0 = [SP++];
+ RTS;
+ .size _led_init, .-_led_init
+
+/* Set one LED on. Leave other LEDs unchanged.
+ It expects the LED number passed through R0. */
+
+ENTRY(_led_on)
+ LINK 0;
+ [--SP] = P0;
+ [--SP] = R1;
+ CALL _led_init;
+ R1 = 1;
+ R0 += 5;
+ R1 <<= R0;
+ P0.H = hi(PORTG_SET);
+ P0.L = lo(PORTG_SET);
+ W[P0] = R1.L;
+ SSYNC;
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_on, .-_led_on
+
+/* Set one LED off. Leave other LEDs unchanged. */
+
+ENTRY(_led_off)
+ LINK 0;
+ [--SP] = P0;
+ [--SP] = R1;
+ CALL _led_init;
+ R1 = 1;
+ R0 += 5;
+ R1 <<= R0;
+ P0.H = hi(PORTG_CLEAR);
+ P0.L = lo(PORTG_CLEAR);
+ W[P0] = R1.L;
+ SSYNC;
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_off, .-_led_off
+
+/* Toggle one LED. Leave other LEDs unchanged. */
+
+ENTRY(_led_toggle)
+ LINK 0;
+ [--SP] = P0;
+ [--SP] = R1;
+ CALL _led_init;
+ R1 = 1;
+ R0 += 5;
+ R1 <<= R0;
+ P0.H = hi(PORTG);
+ P0.L = lo(PORTG);
+ R0 = W[P0](Z);
+ SSYNC;
+ R0 = R0 ^ R1;
+ W[P0] = R0.L;
+ SSYNC;
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_toggle, .-_led_toggle
+
+/* Display the number using LEDs in binary format. */
+
+ENTRY(_led_disp_num)
+ LINK 0;
+ [--SP] = P0;
+ [--SP] = R1;
+ [--SP] = R2;
+ CALL _led_init;
+ R1 = 0x3f(X);
+ R0 = R0 & R1;
+ R2 = 6(X);
+ R0 <<= R2;
+ R1 <<= R2;
+ P0.H = hi(PORTG);
+ P0.L = lo(PORTG);
+ R2 = W[P0](Z);
+ SSYNC;
+ R1 = ~R1;
+ R2 = R2 & R1;
+ R2 = R2 | R0;
+ W[P0] = R2.L;
+ SSYNC;
+ R2 = [SP++];
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_disp_num, .-_led_disp_num
+
+/* Toggle the number using LEDs in binary format. */
+
+ENTRY(_led_toggle_num)
+ LINK 0;
+ [--SP] = P0;
+ [--SP] = R1;
+ [--SP] = R2;
+ CALL _led_init;
+ R1 = 0x3f(X);
+ R0 = R0 & R1;
+ R1 = 6(X);
+ R0 <<= R1;
+ P0.H = hi(PORTG);
+ P0.L = lo(PORTG);
+ R1 = W[P0](Z);
+ SSYNC;
+ R1 = R1 ^ R0;
+ W[P0] = R1.L;
+ SSYNC;
+ R2 = [SP++];
+ R1 = [SP++];
+ P0 = [SP++];
+ UNLINK;
+ RTS;
+ .size _led_toggle_num, .-_led_toggle_num
+
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf548/cpu.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: clock scaling for the bf54x
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <asm/dpmc.h>
+#include <linux/fs.h>
+#include <asm/bfin-global.h>
+
+/* CONFIG_CLKIN_HZ=25000000 */
+#define VCO5 (CONFIG_CLKIN_HZ*45)
+#define VCO4 (CONFIG_CLKIN_HZ*36)
+#define VCO3 (CONFIG_CLKIN_HZ*27)
+#define VCO2 (CONFIG_CLKIN_HZ*18)
+#define VCO1 (CONFIG_CLKIN_HZ*9)
+#define VCO(x) VCO##x
+
+#define MFREQ(x) {VCO(x),VCO(x)/4},{VCO(x),VCO(x)/2},{VCO(x),VCO(x)}
+/* frequency */
+static struct cpufreq_frequency_table bf548_freq_table[] = {
+ MFREQ(1),
+ MFREQ(3),
+ {VCO4, VCO4 / 2}, {VCO4, VCO4},
+ MFREQ(5),
+ {0, CPUFREQ_TABLE_END},
+};
+
+/*
+ * dpmc_fops->ioctl()
+ * static int dpmc_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+ */
+static int bf548_getfreq(unsigned int cpu)
+{
+ unsigned long cclk_mhz;
+
+ /* The driver only support single cpu */
+ if (cpu == 0)
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_GET_CORECLOCK, &cclk_mhz);
+ else
+ cclk_mhz = -1;
+
+ return cclk_mhz;
+}
+
+static int bf548_target(struct cpufreq_policy *policy,
+ unsigned int target_freq, unsigned int relation)
+{
+ unsigned long cclk_mhz;
+ unsigned long vco_mhz;
+ unsigned long flags;
+ unsigned int index;
+ struct cpufreq_freqs freqs;
+
+ if (cpufreq_frequency_table_target(policy, bf548_freq_table, target_freq, relation, &index))
+ return -EINVAL;
+
+ cclk_mhz = bf548_freq_table[index].frequency;
+ vco_mhz = bf548_freq_table[index].index;
+
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_CHANGE_FREQUENCY, &vco_mhz);
+ freqs.old = bf548_getfreq(0);
+ freqs.new = cclk_mhz;
+ freqs.cpu = 0;
+
+ pr_debug("cclk begin change to cclk %d,vco=%d,index=%d,target=%d,oldfreq=%d\n",
+ cclk_mhz, vco_mhz, index, target_freq, freqs.old);
+
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+ local_irq_save(flags);
+ dpmc_fops.ioctl(NULL, NULL, IOCTL_SET_CCLK, &cclk_mhz);
+ local_irq_restore(flags);
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ vco_mhz = get_vco();
+ cclk_mhz = get_cclk();
+ return 0;
+}
+
+/* make sure that only the "userspace" governor is run -- anything else wouldn't make sense on
+ * this platform, anyway.
+ */
+static int bf548_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, &bf548_freq_table);
+}
+
+static int __init __bf548_cpu_init(struct cpufreq_policy *policy)
+{
+ if (policy->cpu != 0)
+ return -EINVAL;
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+ /*Now ,only support one cpu */
+ policy->cur = bf548_getfreq(0);
+ cpufreq_frequency_table_get_attr(bf548_freq_table, policy->cpu);
+ return cpufreq_frequency_table_cpuinfo(policy, bf548_freq_table);
+}
+
+static struct freq_attr *bf548_freq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static struct cpufreq_driver bf548_driver = {
+ .verify = bf548_verify_speed,
+ .target = bf548_target,
+ .get = bf548_getfreq,
+ .init = __bf548_cpu_init,
+ .name = "bf548",
+ .owner = THIS_MODULE,
+ .attr = bf548_freq_attr,
+};
+
+static int __init bf548_cpu_init(void)
+{
+ return cpufreq_register_driver(&bf548_driver);
+}
+
+static void __exit bf548_cpu_exit(void)
+{
+ cpufreq_unregister_driver(&bf548_driver);
+}
+
+MODULE_AUTHOR("Mickael Kang");
+MODULE_DESCRIPTION("cpufreq driver for BF548 CPU");
+MODULE_LICENSE("GPL");
+
+module_init(bf548_cpu_init);
+module_exit(bf548_cpu_exit);
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf561/dma.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+ struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+ (struct dma_register *) DMA0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA7_NEXT_DESC_PTR,
+ (struct dma_register *) DMA8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA11_NEXT_DESC_PTR,
+ (struct dma_register *) DMA12_NEXT_DESC_PTR,
+ (struct dma_register *) DMA13_NEXT_DESC_PTR,
+ (struct dma_register *) DMA14_NEXT_DESC_PTR,
+ (struct dma_register *) DMA15_NEXT_DESC_PTR,
+ (struct dma_register *) DMA16_NEXT_DESC_PTR,
+ (struct dma_register *) DMA17_NEXT_DESC_PTR,
+ (struct dma_register *) DMA18_NEXT_DESC_PTR,
+ (struct dma_register *) DMA19_NEXT_DESC_PTR,
+ (struct dma_register *) DMA20_NEXT_DESC_PTR,
+ (struct dma_register *) DMA21_NEXT_DESC_PTR,
+ (struct dma_register *) DMA22_NEXT_DESC_PTR,
+ (struct dma_register *) DMA23_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D2_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S2_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_D3_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA_S3_NEXT_DESC_PTR,
+};
+
+int channel2irq(unsigned int channel)
+{
+ int ret_irq = -1;
+
+ switch (channel) {
+ case CH_SPORT0_RX:
+ ret_irq = IRQ_SPORT0_RX;
+ break;
+ case CH_SPORT0_TX:
+ ret_irq = IRQ_SPORT0_TX;
+ break;
+ case CH_SPORT1_RX:
+ ret_irq = IRQ_SPORT1_RX;
+ break;
+ case CH_SPORT1_TX:
+ ret_irq = IRQ_SPORT1_TX;
+ case CH_SPI0:
+ ret_irq = IRQ_SPI0;
+ break;
+ case CH_SPI1:
+ ret_irq = IRQ_SPI1;
+ break;
+ case CH_UART0_RX:
+ ret_irq = IRQ_UART_RX;
+ break;
+ case CH_UART0_TX:
+ ret_irq = IRQ_UART_TX;
+ break;
+ case CH_UART1_RX:
+ ret_irq = IRQ_UART_RX;
+ break;
+ case CH_UART1_TX:
+ ret_irq = IRQ_UART_TX;
+ break;
+ case CH_EPPI0:
+ ret_irq = IRQ_EPPI0;
+ break;
+ case CH_EPPI1:
+ ret_irq = IRQ_EPPI1;
+ break;
+ case CH_EPPI2:
+ ret_irq = IRQ_EPPI2;
+ break;
+ case CH_PIXC_IMAGE:
+ ret_irq = IRQ_PIXC_IN0;
+ break;
+ case CH_PIXC_OVERLAY:
+ ret_irq = IRQ_PIXC_IN1;
+ break;
+ case CH_PIXC_OUTPUT:
+ ret_irq = IRQ_PIXC_OUT;
+ break;
+ case CH_SPORT2_RX:
+ ret_irq = IRQ_SPORT2_RX;
+ break;
+ case CH_SPORT2_TX:
+ ret_irq = IRQ_SPORT2_TX;
+ break;
+ case CH_SPORT3_RX:
+ ret_irq = IRQ_SPORT3_RX;
+ break;
+ case CH_SPORT3_TX:
+ ret_irq = IRQ_SPORT3_TX;
+ break;
+ case CH_SDH:
+ ret_irq = IRQ_SDH;
+ break;
+ case CH_SPI2:
+ ret_irq = IRQ_SPI2;
+ break;
+ case CH_MEM_STREAM0_SRC:
+ case CH_MEM_STREAM0_DEST:
+ ret_irq = IRQ_MDMAS0;
+ break;
+ case CH_MEM_STREAM1_SRC:
+ case CH_MEM_STREAM1_DEST:
+ ret_irq = IRQ_MDMAS1;
+ break;
+ case CH_MEM_STREAM2_SRC:
+ case CH_MEM_STREAM2_DEST:
+ ret_irq = IRQ_MDMAS2;
+ break;
+ case CH_MEM_STREAM3_SRC:
+ case CH_MEM_STREAM3_DEST:
+ ret_irq = IRQ_MDMAS3;
+ break;
+ }
+ return ret_irq;
+}
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf548/gpio.c
+ * Based on:
+ * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description: GPIO Abstraction Layer
+ *
+ * Modified:
+ * Copyright 2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <asm/blackfin.h>
+#include <asm/gpio.h>
+#include <asm/portmux.h>
+#include <linux/irq.h>
+
+static struct gpio_port_t *gpio_array[gpio_bank(MAX_BLACKFIN_GPIOS)] = {
+ (struct gpio_port_t *)PORTA_FER,
+ (struct gpio_port_t *)PORTB_FER,
+ (struct gpio_port_t *)PORTC_FER,
+ (struct gpio_port_t *)PORTD_FER,
+ (struct gpio_port_t *)PORTE_FER,
+ (struct gpio_port_t *)PORTF_FER,
+ (struct gpio_port_t *)PORTG_FER,
+ (struct gpio_port_t *)PORTH_FER,
+ (struct gpio_port_t *)PORTI_FER,
+ (struct gpio_port_t *)PORTJ_FER,
+};
+
+static unsigned short reserved_gpio_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+static unsigned short reserved_peri_map[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+inline int check_gpio(unsigned short gpio)
+{
+ if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
+ || gpio == GPIO_PH14 || gpio == GPIO_PH15
+ || gpio == GPIO_PJ14 || gpio == GPIO_PJ15
+ || gpio > MAX_BLACKFIN_GPIOS)
+ return -EINVAL;
+ return 0;
+}
+
+inline void portmux_setup(unsigned short portno, unsigned short function)
+{
+ u32 pmux;
+
+ pmux = gpio_array[gpio_bank(portno)]->port_mux;
+
+ pmux &= ~(0x3 << (2 * gpio_sub_n(portno)));
+ pmux |= (function & 0x3) << (2 * gpio_sub_n(portno));
+
+ gpio_array[gpio_bank(portno)]->port_mux = pmux;
+
+}
+
+inline u16 get_portmux(unsigned short portno)
+{
+ u32 pmux;
+
+ pmux = gpio_array[gpio_bank(portno)]->port_mux;
+
+ return (pmux >> (2 * gpio_sub_n(portno)) & 0x3);
+
+}
+
+static void port_setup(unsigned short gpio, unsigned short usage)
+{
+ if (usage == GPIO_USAGE) {
+ if (gpio_array[gpio_bank(gpio)]->port_fer & gpio_bit(gpio))
+ printk(KERN_WARNING
+ "bfin-gpio: Possible Conflict with Peripheral "
+ "usage and GPIO %d detected!\n", gpio);
+ gpio_array[gpio_bank(gpio)]->port_fer &= ~gpio_bit(gpio);
+ } else
+ gpio_array[gpio_bank(gpio)]->port_fer |= gpio_bit(gpio);
+ SSYNC();
+}
+
+static int __init bfin_gpio_init(void)
+{
+ printk(KERN_INFO "Blackfin GPIO Controller\n");
+
+ return 0;
+}
+
+arch_initcall(bfin_gpio_init);
+
+int peripheral_request(unsigned short per, const char *label)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ if (!(per & P_DEFINED))
+ return -ENODEV;
+
+ if (check_gpio(ident) < 0)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (unlikely(reserved_gpio_map[gpio_bank(ident)] & gpio_bit(ident))) {
+ printk(KERN_ERR
+ "%s: Peripheral %d is already reserved as GPIO!\n",
+ __FUNCTION__, per);
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ if (unlikely(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident))) {
+
+ u16 funct = get_portmux(ident);
+
+ if (!((per & P_MAYSHARE) && (funct == P_FUNCT2MUX(per)))) {
+ printk(KERN_ERR
+ "%s: Peripheral %d is already reserved!\n",
+ __FUNCTION__, per);
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+ }
+
+ reserved_peri_map[gpio_bank(ident)] |= gpio_bit(ident);
+
+ portmux_setup(ident, P_FUNCT2MUX(per));
+ port_setup(ident, PERIPHERAL_USAGE);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request);
+
+int peripheral_request_list(unsigned short per[], const char *label)
+{
+
+ u16 cnt;
+ int ret;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ ret = peripheral_request(per[cnt], label);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(peripheral_request_list);
+
+void peripheral_free(unsigned short per)
+{
+ unsigned long flags;
+ unsigned short ident = P_IDENT(per);
+
+ if (!(per & P_DEFINED))
+ return;
+
+ if (check_gpio(ident) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_peri_map[gpio_bank(ident)] & gpio_bit(ident)))) {
+ printk(KERN_ERR "bfin-gpio: Peripheral %d wasn't reserved!\n", per);
+ dump_stack();
+ local_irq_restore(flags);
+ return;
+ }
+
+ if (!(per & P_MAYSHARE)) {
+ port_setup(ident, GPIO_USAGE);
+ }
+
+ reserved_peri_map[gpio_bank(ident)] &= ~gpio_bit(ident);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(peripheral_free);
+
+void peripheral_free_list(unsigned short per[])
+{
+ u16 cnt;
+
+ for (cnt = 0; per[cnt] != 0; cnt++) {
+ peripheral_free(per[cnt]);
+ }
+
+}
+EXPORT_SYMBOL(peripheral_free_list);
+
+/***********************************************************
+*
+* FUNCTIONS: Blackfin GPIO Driver
+*
+* INPUTS/OUTPUTS:
+* gpio - GPIO Number between 0 and MAX_BLACKFIN_GPIOS
+*
+*
+* DESCRIPTION: Blackfin GPIO Driver API
+*
+* CAUTION:
+*************************************************************
+* MODIFICATION HISTORY :
+**************************************************************/
+
+int gpio_request(unsigned short gpio, const char *label)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (unlikely(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ printk(KERN_ERR "bfin-gpio: GPIO %d is already reserved!\n", gpio);
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ if (unlikely(reserved_peri_map[gpio_bank(gpio)] & gpio_bit(gpio))) {
+ printk(KERN_ERR
+ "bfin-gpio: GPIO %d is already reserved as Peripheral!\n", gpio);
+ dump_stack();
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ reserved_gpio_map[gpio_bank(gpio)] |= gpio_bit(gpio);
+
+ local_irq_restore(flags);
+
+ port_setup(gpio, GPIO_USAGE);
+
+ return 0;
+}
+EXPORT_SYMBOL(gpio_request);
+
+void gpio_free(unsigned short gpio)
+{
+ unsigned long flags;
+
+ if (check_gpio(gpio) < 0)
+ return;
+
+ local_irq_save(flags);
+
+ if (unlikely(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)))) {
+ printk(KERN_ERR "bfin-gpio: GPIO %d wasn't reserved!\n", gpio);
+ dump_stack();
+ local_irq_restore(flags);
+ return;
+ }
+
+ reserved_gpio_map[gpio_bank(gpio)] &= ~gpio_bit(gpio);
+
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_free);
+
+void gpio_direction_input(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_array[gpio_bank(gpio)]->port_dir_clear = gpio_bit(gpio);
+ gpio_array[gpio_bank(gpio)]->port_inen |= gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_input);
+
+void gpio_direction_output(unsigned short gpio)
+{
+ unsigned long flags;
+
+ BUG_ON(!(reserved_gpio_map[gpio_bank(gpio)] & gpio_bit(gpio)));
+
+ local_irq_save(flags);
+ gpio_array[gpio_bank(gpio)]->port_inen &= ~gpio_bit(gpio);
+ gpio_array[gpio_bank(gpio)]->port_dir_set = gpio_bit(gpio);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL(gpio_direction_output);
+
+void gpio_set_value(unsigned short gpio, unsigned short arg)
+{
+ if (arg)
+ gpio_array[gpio_bank(gpio)]->port_set = gpio_bit(gpio);
+ else
+ gpio_array[gpio_bank(gpio)]->port_clear = gpio_bit(gpio);
+
+}
+EXPORT_SYMBOL(gpio_set_value);
+
+unsigned short gpio_get_value(unsigned short gpio)
+{
+ return (1 & (gpio_array[gpio_bank(gpio)]->port_data >> gpio_sub_n(gpio)));
+}
+EXPORT_SYMBOL(gpio_get_value);
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf548/head.S
+ * Based on: arch/blackfin/mach-bf537/head.S
+ * Author: Jeff Dionne <jeff@uclinux.org> COPYRIGHT 1998 D. Jeff Dionne
+ *
+ * Created: 1998
+ * Description: Startup code for Blackfin BF548
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/linkage.h>
+#include <asm/blackfin.h>
+#include <asm/trace.h>
+#if CONFIG_BFIN_KERNEL_CLOCK
+#include <asm/mach/mem_init.h>
+#endif
+
+.global __rambase
+.global __ramstart
+.global __ramend
+.extern ___bss_stop
+.extern ___bss_start
+.extern _bf53x_relocate_l1_mem
+
+#define INITIAL_STACK 0xFFB01000
+
+.text
+
+ENTRY(__start)
+ENTRY(__stext)
+ /* R0: argument of command line string, passed from uboot, save it */
+ R7 = R0;
+ /* Set the SYSCFG register */
+ R0 = 0x36;
+ SYSCFG = R0; /*Enable Cycle Counter and Nesting Of Interrupts(3rd Bit)*/
+ R0 = 0;
+
+ /* Clear Out All the data and pointer Registers*/
+ R1 = R0;
+ R2 = R0;
+ R3 = R0;
+ R4 = R0;
+ R5 = R0;
+ R6 = R0;
+
+ P0 = R0;
+ P1 = R0;
+ P2 = R0;
+ P3 = R0;
+ P4 = R0;
+ P5 = R0;
+
+ LC0 = r0;
+ LC1 = r0;
+ L0 = r0;
+ L1 = r0;
+ L2 = r0;
+ L3 = r0;
+
+ /* Clear Out All the DAG Registers*/
+ B0 = r0;
+ B1 = r0;
+ B2 = r0;
+ B3 = r0;
+
+ I0 = r0;
+ I1 = r0;
+ I2 = r0;
+ I3 = r0;
+
+ M0 = r0;
+ M1 = r0;
+ M2 = r0;
+ M3 = r0;
+
+ trace_buffer_start(p0,r0);
+ P0 = R1;
+ R0 = R1;
+
+ /* Turn off the icache */
+ p0.l = (IMEM_CONTROL & 0xFFFF);
+ p0.h = (IMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENICPLB;
+ R0 = R0 & R1;
+ [p0] = R0;
+ SSYNC;
+
+ /* Turn off the dcache */
+ p0.l = (DMEM_CONTROL & 0xFFFF);
+ p0.h = (DMEM_CONTROL >> 16);
+ R1 = [p0];
+ R0 = ~ENDCPLB;
+ R0 = R0 & R1;
+ [p0] = R0;
+ SSYNC;
+
+ /* Initialize stack pointer */
+ SP.L = LO(INITIAL_STACK);
+ SP.H = HI(INITIAL_STACK);
+ FP = SP;
+ USP = SP;
+
+ /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
+ call _bf53x_relocate_l1_mem;
+#if CONFIG_BFIN_KERNEL_CLOCK
+ call _start_dma_code;
+#endif
+ /* Code for initializing Async memory banks */
+
+ p2.h = hi(EBIU_AMBCTL1);
+ p2.l = lo(EBIU_AMBCTL1);
+ r0.h = hi(AMBCTL1VAL);
+ r0.l = lo(AMBCTL1VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMBCTL0);
+ p2.l = lo(EBIU_AMBCTL0);
+ r0.h = hi(AMBCTL0VAL);
+ r0.l = lo(AMBCTL0VAL);
+ [p2] = r0;
+ ssync;
+
+ p2.h = hi(EBIU_AMGCTL);
+ p2.l = lo(EBIU_AMGCTL);
+ r0 = AMGCTLVAL;
+ w[p2] = r0;
+ ssync;
+
+ /* This section keeps the processor in supervisor mode
+ * during kernel boot. Switches to user mode at end of boot.
+ * See page 3-9 of Hardware Reference manual for documentation.
+ */
+
+ /* EVT15 = _real_start */
+
+ p0.l = lo(EVT15);
+ p0.h = hi(EVT15);
+ p1.l = _real_start;
+ p1.h = _real_start;
+ [p0] = p1;
+ csync;
+
+ p0.l = lo(IMASK);
+ p0.h = hi(IMASK);
+ p1.l = IMASK_IVG15;
+ p1.h = 0x0;
+ [p0] = p1;
+ csync;
+
+ raise 15;
+ p0.l = .LWAIT_HERE;
+ p0.h = .LWAIT_HERE;
+ reti = p0;
+#if defined (ANOMALY_05000281)
+ nop;
+ nop;
+ nop;
+#endif
+ rti;
+
+.LWAIT_HERE:
+ jump .LWAIT_HERE;
+
+ENTRY(_real_start)
+ [ -- sp ] = reti;
+ p0.l = lo(WDOG_CTL);
+ p0.h = hi(WDOG_CTL);
+ r0 = 0xAD6(z);
+ w[p0] = r0; /* watchdog off for now */
+ ssync;
+
+ /* Code update for BSS size == 0
+ * Zero out the bss region.
+ */
+
+ p1.l = ___bss_start;
+ p1.h = ___bss_start;
+ p2.l = ___bss_stop;
+ p2.h = ___bss_stop;
+ r0 = 0;
+ p2 -= p1;
+ lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2;
+.L_clear_bss:
+ B[p1++] = r0;
+
+ /* In case there is a NULL pointer reference
+ * Zero out region before stext
+ */
+
+ p1.l = 0x0;
+ p1.h = 0x0;
+ r0.l = __stext;
+ r0.h = __stext;
+ r0 = r0 >> 1;
+ p2 = r0;
+ r0 = 0;
+ lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2;
+.L_clear_zero:
+ W[p1++] = r0;
+
+ /* pass the uboot arguments to the global value command line */
+ R0 = R7;
+ call _cmdline_init;
+
+ p1.l = __rambase;
+ p1.h = __rambase;
+ r0.l = __sdata;
+ r0.h = __sdata;
+ [p1] = r0;
+
+ p1.l = __ramstart;
+ p1.h = __ramstart;
+ p3.l = ___bss_stop;
+ p3.h = ___bss_stop;
+
+ r1 = p3;
+ [p1] = r1;
+
+
+ /*
+ * load the current thread pointer and stack
+ */
+ r1.l = _init_thread_union;
+ r1.h = _init_thread_union;
+
+ r2.l = 0x2000;
+ r2.h = 0x0000;
+ r1 = r1 + r2;
+ sp = r1;
+ usp = sp;
+ fp = sp;
+ call _start_kernel;
+.L_exit:
+ jump.s .L_exit;
+
+.section .l1.text
+#if CONFIG_BFIN_KERNEL_CLOCK
+ENTRY(_start_dma_code)
+
+ /* Enable PHY CLK buffer output */
+ p0.h = hi(VR_CTL);
+ p0.l = lo(VR_CTL);
+ r0.l = w[p0];
+ bitset(r0, 14);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = 0x1;
+ r0.h = 0x0;
+ [p0] = r0;
+ SSYNC;
+
+ /*
+ * Set PLL_CTL
+ * - [14:09] = MSEL[5:0] : CLKIN / VCO multiplication factors
+ * - [8] = BYPASS : BYPASS the PLL, run CLKIN into CCLK/SCLK
+ * - [7] = output delay (add 200ps of delay to mem signals)
+ * - [6] = input delay (add 200ps of input delay to mem signals)
+ * - [5] = PDWN : 1=All Clocks off
+ * - [3] = STOPCK : 1=Core Clock off
+ * - [1] = PLL_OFF : 1=Disable Power to PLL
+ * - [0] = DF : 1=Pass CLKIN/2 to PLL / 0=Pass CLKIN to PLL
+ * all other bits set to zero
+ */
+
+ p0.h = hi(PLL_LOCKCNT);
+ p0.l = lo(PLL_LOCKCNT);
+ r0 = 0x300(Z);
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITSET (R0, 24);
+ [P2] = R0;
+ SSYNC;
+
+ r0 = CONFIG_VCO_MULT & 63; /* Load the VCO multiplier */
+ r0 = r0 << 9; /* Shift it over, */
+ r1 = CLKIN_HALF; /* Do we need to divide CLKIN by 2?*/
+ r0 = r1 | r0;
+ r1 = PLL_BYPASS; /* Bypass the PLL? */
+ r1 = r1 << 8; /* Shift it over */
+ r0 = r1 | r0; /* add them all together */
+
+ p0.h = hi(PLL_CTL);
+ p0.l = lo(PLL_CTL); /* Load the address */
+ cli r2; /* Disable interrupts */
+ ssync;
+ w[p0] = r0.l; /* Set the value */
+ idle; /* Wait for the PLL to stablize */
+ sti r2; /* Enable interrupts */
+
+.Lcheck_again:
+ p0.h = hi(PLL_STAT);
+ p0.l = lo(PLL_STAT);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,5);
+ if ! CC jump .Lcheck_again;
+
+ /* Configure SCLK & CCLK Dividers */
+ r0 = (CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
+ p0.h = hi(PLL_DIV);
+ p0.l = lo(PLL_DIV);
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = lo(EBIU_SDRRC);
+ p0.h = hi(EBIU_SDRRC);
+ r0 = mem_SDRRC;
+ w[p0] = r0.l;
+ ssync;
+
+ p0.l = (EBIU_SDBCTL & 0xFFFF);
+ p0.h = (EBIU_SDBCTL >> 16); /* SDRAM Memory Bank Control Register */
+ r0 = mem_SDBCTL;
+ w[p0] = r0.l;
+ ssync;
+
+ P2.H = hi(EBIU_SDGCTL);
+ P2.L = lo(EBIU_SDGCTL);
+ R0 = [P2];
+ BITCLR (R0, 24);
+ p0.h = hi(EBIU_SDSTAT);
+ p0.l = lo(EBIU_SDSTAT);
+ r2.l = w[p0];
+ cc = bittst(r2,3);
+ if !cc jump .Lskip;
+ NOP;
+ BITSET (R0, 23);
+.Lskip:
+ [P2] = R0;
+ SSYNC;
+
+ R0.L = lo(mem_SDGCTL);
+ R0.H = hi(mem_SDGCTL);
+ R1 = [p2];
+ R1 = R1 | R0;
+ [P2] = R1;
+ SSYNC;
+
+ p0.h = hi(SIC_IWR);
+ p0.l = lo(SIC_IWR);
+ r0.l = lo(IWR_ENABLE_ALL);
+ r0.h = hi(IWR_ENABLE_ALL);
+ [p0] = r0;
+ SSYNC;
+
+ RTS;
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+ENTRY(_bfin_reset)
+ /* No more interrupts to be handled*/
+ CLI R6;
+ SSYNC;
+
+#if defined(CONFIG_MTD_M25P80)
+/*
+ * The following code fix the SPI flash reboot issue,
+ * /CS signal of the chip which is using PF10 return to GPIO mode
+ */
+ p0.h = hi(PORTF_FER);
+ p0.l = lo(PORTF_FER);
+ r0.l = 0x0000;
+ w[p0] = r0.l;
+ SSYNC;
+
+/* /CS return to high */
+ p0.h = hi(PORTFIO);
+ p0.l = lo(PORTFIO);
+ r0.l = 0xFFFF;
+ w[p0] = r0.l;
+ SSYNC;
+
+/* Delay some time, This is necessary */
+ r1.h = 0;
+ r1.l = 0x400;
+ p1 = r1;
+ lsetup (_delay_lab1,_delay_lab1_end ) lc1 = p1;
+_delay_lab1:
+ r0.h = 0;
+ r0.l = 0x8000;
+ p0 = r0;
+ lsetup (_delay_lab0,_delay_lab0_end ) lc0 = p0;
+_delay_lab0:
+ nop;
+_delay_lab0_end:
+ nop;
+_delay_lab1_end:
+ nop;
+#endif
+
+ /* Clear the bits 13-15 in SWRST if they werent cleared */
+ p0.h = hi(SWRST);
+ p0.l = lo(SWRST);
+ csync;
+ r0.l = w[p0];
+
+ /* Clear the IMASK register */
+ p0.h = hi(IMASK);
+ p0.l = lo(IMASK);
+ r0 = 0x0;
+ [p0] = r0;
+
+ /* Clear the ILAT register */
+ p0.h = hi(ILAT);
+ p0.l = lo(ILAT);
+ r0 = [p0];
+ [p0] = r0;
+ SSYNC;
+
+ /* Disable the WDOG TIMER */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0xAD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Clear the sticky bit incase it is already set */
+ p0.h = hi(WDOG_CTL);
+ p0.l = lo(WDOG_CTL);
+ r0.l = 0x8AD6;
+ w[p0] = r0.l;
+ SSYNC;
+
+ /* Program the count value */
+ R0.l = 0x100;
+ R0.h = 0x0;
+ P0.h = hi(WDOG_CNT);
+ P0.l = lo(WDOG_CNT);
+ [P0] = R0;
+ SSYNC;
+
+ /* Program WDOG_STAT if necessary */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ CC = BITTST(R0,1);
+ if !CC JUMP .LWRITESTAT;
+ CC = BITTST(R0,2);
+ if !CC JUMP .LWRITESTAT;
+ JUMP .LSKIP_WRITE;
+
+.LWRITESTAT:
+ /* When watch dog timer is enabled,
+ * a write to STAT will load the contents of CNT to STAT
+ */
+ R0 = 0x0000(z);
+ P0.h = hi(WDOG_STAT);
+ P0.l = lo(WDOG_STAT)
+ [P0] = R0;
+ SSYNC;
+
+.LSKIP_WRITE:
+ /* Enable the reset event */
+ P0.h = hi(WDOG_CTL);
+ P0.l = lo(WDOG_CTL);
+ R0 = W[P0](Z);
+ BITCLR(R0,1);
+ BITCLR(R0,2);
+ W[P0] = R0.L;
+ SSYNC;
+ NOP;
+
+ /* Enable the wdog counter */
+ R0 = W[P0](Z);
+ BITCLR(R0,4);
+ W[P0] = R0.L;
+ SSYNC;
+
+ IDLE;
+
+ RTS;
+
+.data
+
+/*
+ * Set up the usable of RAM stuff. Size of RAM is determined then
+ * an initial stack set up at the end.
+ */
+
+.align 4
+__rambase:
+.long 0
+__ramstart:
+.long 0
+__ramend:
+.long 0
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf537/ints-priority.c
+ * Based on: arch/blackfin/mach-bf533/ints-priority.c
+ * Author: Michael Hennerich
+ *
+ * Created:
+ * Description: Set up the interupt priorities
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <asm/blackfin.h>
+
+void program_IAR(void)
+{
+ /* Program the IAR0 Register with the configured priority */
+ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) |
+ ((CONFIG_IRQ_DMAC0_ERR - 7) << IRQ_DMAC0_ERR_POS) |
+ ((CONFIG_IRQ_EPPI0_ERR - 7) << IRQ_EPPI0_ERR_POS) |
+ ((CONFIG_IRQ_SPORT0_ERR - 7) << IRQ_SPORT0_ERR_POS) |
+ ((CONFIG_IRQ_SPORT1_ERR - 7) << IRQ_SPORT1_ERR_POS) |
+ ((CONFIG_IRQ_SPI0_ERR - 7) << IRQ_SPI0_ERR_POS) |
+ ((CONFIG_IRQ_UART0_ERR - 7) << IRQ_UART0_ERR_POS) |
+ ((CONFIG_IRQ_RTC - 7) << IRQ_RTC_POS));
+
+ bfin_write_SIC_IAR1(((CONFIG_IRQ_EPPI0 - 7) << IRQ_EPPI0_POS) |
+ ((CONFIG_IRQ_SPORT0_RX - 7) << IRQ_SPORT0_RX_POS) |
+ ((CONFIG_IRQ_SPORT0_TX - 7) << IRQ_SPORT0_TX_POS) |
+ ((CONFIG_IRQ_SPORT1_RX - 7) << IRQ_SPORT1_RX_POS) |
+ ((CONFIG_IRQ_SPORT1_TX - 7) << IRQ_SPORT1_TX_POS) |
+ ((CONFIG_IRQ_SPI0 - 7) << IRQ_SPI0_POS) |
+ ((CONFIG_IRQ_UART0_RX - 7) << IRQ_UART0_RX_POS) |
+ ((CONFIG_IRQ_UART0_TX - 7) << IRQ_UART0_TX_POS));
+
+ bfin_write_SIC_IAR2(((CONFIG_IRQ_TIMER8 - 7) << IRQ_TIMER8_POS) |
+ ((CONFIG_IRQ_TIMER9 - 7) << IRQ_TIMER9_POS) |
+ ((CONFIG_IRQ_PINT0 - 7) << IRQ_PINT0_POS) |
+ ((CONFIG_IRQ_PINT1 - 7) << IRQ_PINT1_POS) |
+ ((CONFIG_IRQ_MDMAS0 - 7) << IRQ_MDMAS0_POS) |
+ ((CONFIG_IRQ_MDMAS1 - 7) << IRQ_MDMAS1_POS) |
+ ((CONFIG_IRQ_WATCHDOG - 7) << IRQ_WATCHDOG_POS));
+
+ bfin_write_SIC_IAR3(((CONFIG_IRQ_DMAC1_ERR - 7) << IRQ_DMAC1_ERR_POS) |
+ ((CONFIG_IRQ_SPORT2_ERR - 7) << IRQ_SPORT2_ERR_POS) |
+ ((CONFIG_IRQ_SPORT3_ERR - 7) << IRQ_SPORT3_ERR_POS) |
+ ((CONFIG_IRQ_MXVR_DATA - 7) << IRQ_MXVR_DATA_POS) |
+ ((CONFIG_IRQ_SPI1_ERR - 7) << IRQ_SPI1_ERR_POS) |
+ ((CONFIG_IRQ_SPI2_ERR - 7) << IRQ_SPI2_ERR_POS) |
+ ((CONFIG_IRQ_UART1_ERR - 7) << IRQ_UART1_ERR_POS) |
+ ((CONFIG_IRQ_UART2_ERR - 7) << IRQ_UART2_ERR_POS));
+
+ bfin_write_SIC_IAR4(((CONFIG_IRQ_CAN0_ERR - 7) << IRQ_CAN0_ERR_POS) |
+ ((CONFIG_IRQ_SPORT2_RX - 7) << IRQ_SPORT2_RX_POS) |
+ ((CONFIG_IRQ_SPORT2_TX - 7) << IRQ_SPORT2_TX_POS) |
+ ((CONFIG_IRQ_SPORT3_RX - 7) << IRQ_SPORT3_RX_POS) |
+ ((CONFIG_IRQ_SPORT3_TX - 7) << IRQ_SPORT3_TX_POS) |
+ ((CONFIG_IRQ_EPPI1 - 7) << IRQ_EPPI1_POS) |
+ ((CONFIG_IRQ_EPPI2 - 7) << IRQ_EPPI2_POS) |
+ ((CONFIG_IRQ_SPI1 - 7) << IRQ_SPI1_POS));
+
+ bfin_write_SIC_IAR5(((CONFIG_IRQ_SPI2 - 7) << IRQ_SPI2_POS) |
+ ((CONFIG_IRQ_UART1_RX - 7) << IRQ_UART1_RX_POS) |
+ ((CONFIG_IRQ_UART1_TX - 7) << IRQ_UART1_TX_POS) |
+ ((CONFIG_IRQ_ATAPI_RX - 7) << IRQ_ATAPI_RX_POS) |
+ ((CONFIG_IRQ_ATAPI_TX - 7) << IRQ_ATAPI_TX_POS) |
+ ((CONFIG_IRQ_TWI0 - 7) << IRQ_TWI0_POS) |
+ ((CONFIG_IRQ_TWI1 - 7) << IRQ_TWI1_POS) |
+ ((CONFIG_IRQ_CAN0_RX - 7) << IRQ_CAN0_RX_POS));
+
+ bfin_write_SIC_IAR6(((CONFIG_IRQ_CAN0_TX - 7) << IRQ_CAN0_TX_POS) |
+ ((CONFIG_IRQ_MDMAS2 - 7) << IRQ_MDMAS2_POS) |
+ ((CONFIG_IRQ_MDMAS3 - 7) << IRQ_MDMAS3_POS) |
+ ((CONFIG_IRQ_MXVR_ERR - 7) << IRQ_MXVR_ERR_POS) |
+ ((CONFIG_IRQ_MXVR_MSG - 7) << IRQ_MXVR_MSG_POS) |
+ ((CONFIG_IRQ_MXVR_PKT - 7) << IRQ_MXVR_PKT_POS) |
+ ((CONFIG_IRQ_EPPI1_ERR - 7) << IRQ_EPPI1_ERR_POS) |
+ ((CONFIG_IRQ_EPPI2_ERR - 7) << IRQ_EPPI2_ERR_POS));
+
+ bfin_write_SIC_IAR7(((CONFIG_IRQ_UART3_ERR - 7) << IRQ_UART3_ERR_POS) |
+ ((CONFIG_IRQ_HOST_ERR - 7) << IRQ_HOST_ERR_POS) |
+ ((CONFIG_IRQ_PIXC_ERR - 7) << IRQ_PIXC_ERR_POS) |
+ ((CONFIG_IRQ_NFC_ERR - 7) << IRQ_NFC_ERR_POS) |
+ ((CONFIG_IRQ_ATAPI_ERR - 7) << IRQ_ATAPI_ERR_POS) |
+ ((CONFIG_IRQ_CAN1_ERR - 7) << IRQ_CAN1_ERR_POS) |
+ ((CONFIG_IRQ_HS_DMA_ERR - 7) << IRQ_HS_DMA_ERR_POS));
+
+ bfin_write_SIC_IAR8(((CONFIG_IRQ_PIXC_IN0 - 7) << IRQ_PIXC_IN1_POS) |
+ ((CONFIG_IRQ_PIXC_IN1 - 7) << IRQ_PIXC_IN1_POS) |
+ ((CONFIG_IRQ_PIXC_OUT - 7) << IRQ_PIXC_OUT_POS) |
+ ((CONFIG_IRQ_SDH - 7) << IRQ_SDH_POS) |
+ ((CONFIG_IRQ_CNT - 7) << IRQ_CNT_POS) |
+ ((CONFIG_IRQ_KEY - 7) << IRQ_KEY_POS) |
+ ((CONFIG_IRQ_CAN1_RX - 7) << IRQ_CAN1_RX_POS) |
+ ((CONFIG_IRQ_CAN1_TX - 7) << IRQ_CAN1_TX_POS));
+
+ bfin_write_SIC_IAR9(((CONFIG_IRQ_SDH_MASK0 - 7) << IRQ_SDH_MASK0_POS) |
+ ((CONFIG_IRQ_SDH_MASK1 - 7) << IRQ_SDH_MASK1_POS) |
+ ((CONFIG_IRQ_USB_INT0 - 7) << IRQ_USB_INT0_POS) |
+ ((CONFIG_IRQ_USB_INT1 - 7) << IRQ_USB_INT1_POS) |
+ ((CONFIG_IRQ_USB_INT2 - 7) << IRQ_USB_INT2_POS) |
+ ((CONFIG_IRQ_USB_DMA - 7) << IRQ_USB_DMA_POS) |
+ ((CONFIG_IRQ_OTPSEC - 7) << IRQ_OTPSEC_POS));
+
+ bfin_write_SIC_IAR10(((CONFIG_IRQ_TIMER0 - 7) << IRQ_TIMER0_POS) |
+ ((CONFIG_IRQ_TIMER1 - 7) << IRQ_TIMER1_POS));
+
+ bfin_write_SIC_IAR11(((CONFIG_IRQ_TIMER2 - 7) << IRQ_TIMER2_POS) |
+ ((CONFIG_IRQ_TIMER3 - 7) << IRQ_TIMER3_POS) |
+ ((CONFIG_IRQ_TIMER4 - 7) << IRQ_TIMER4_POS) |
+ ((CONFIG_IRQ_TIMER5 - 7) << IRQ_TIMER5_POS) |
+ ((CONFIG_IRQ_TIMER6 - 7) << IRQ_TIMER6_POS) |
+ ((CONFIG_IRQ_TIMER7 - 7) << IRQ_TIMER7_POS) |
+ ((CONFIG_IRQ_PINT2 - 7) << IRQ_PINT2_POS) |
+ ((CONFIG_IRQ_PINT3 - 7) << IRQ_PINT3_POS));
+
+ SSYNC();
+}
extra-y := head.o
-obj-y := ints-priority.o
+obj-y := ints-priority.o dma.o
obj-$(CONFIG_BF561_COREB) += coreb.o
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/usb_isp1362.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
#include <asm/bfin5xx_spi.h>
/*
.size = 0x00020000,
.offset = 0,
.mask_flags = MTD_CAP_ROM
- },{
+ }, {
.name = "kernel",
.size = 0xe0000,
.offset = 0x20000
- },{
+ }, {
.name = "file system",
.size = 0x700000,
.offset = 0x00100000,
.start = 0x28000300,
.end = 0x28000300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF0,
.end = IRQ_PF0,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
.start = 0x24008000,
.end = 0x24008000,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = 0x24008004,
.end = 0x24008004,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF47,
.end = IRQ_PF47,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
};
static struct platform_device bfin_uart_device = {
- .name = "bfin-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
};
#endif
static struct platform_device *cm_bf561_devices[] __initdata = {
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
+ &bfin_uart_device,
#endif
#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
-#include <asm/irq.h>
-#include <asm/bfin5xx_spi.h>
-#include <linux/interrupt.h>
#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <asm/bfin5xx_spi.h>
/*
* Name the Board for the /proc/cpuinfo
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
static struct resource bfin_isp1761_resources[] = {
- [0] = {
+ {
.name = "isp1761-regs",
.start = ISP1761_BASE + 0x00000000,
.end = ISP1761_BASE + 0x000fffff,
.flags = IORESOURCE_MEM,
},
- [1] = {
+ {
.start = ISP1761_IRQ,
.end = ISP1761_IRQ,
.flags = IORESOURCE_IRQ,
int __init bfin_isp1761_init(void)
{
- unsigned int num_devices=ARRAY_SIZE(bfin_isp1761_devices);
+ unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices);
printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING);
.start = 0x2C010300,
.end = 0x2C010300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PF9,
.end = IRQ_PF9,
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
- {
- .start = 0xFFC00400,
- .end = 0xFFC004FF,
- .flags = IORESOURCE_MEM,
- },
+ {
+ .start = 0xFFC00400,
+ .end = 0xFFC004FF,
+ .flags = IORESOURCE_MEM,
+ },
};
static struct platform_device bfin_uart_device = {
- .name = "bfin-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(bfin_uart_resources),
- .resource = bfin_uart_resources,
+ .name = "bfin-uart",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(bfin_uart_resources),
+ .resource = bfin_uart_resources,
};
#endif
&spi_bfin_master_device,
#endif
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
- &bfin_uart_device,
+ &bfin_uart_device,
#endif
};
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
char *bfin_board_name = "UNKNOWN BOARD";
.start = 0x2C010300,
.end = 0x2C010300 + 16,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
#include <linux/device.h>
#include <linux/platform_device.h>
-#include <asm/irq.h>
+#include <linux/irq.h>
char *bfin_board_name = "Tepla-BF561";
.start = 0x2C000300,
.end = 0x2C000320,
.flags = IORESOURCE_MEM,
- },{
+ }, {
.start = IRQ_PROG_INTB,
.end = IRQ_PROG_INTB,
.flags = IORESOURCE_IRQ|IORESOURCE_IRQ_HIGHLEVEL,
- },{
+ }, {
/*
* denotes the flag pin and is used directly if
* CONFIG_IRQCHIP_DEMUX_GPIO is defined.
#include <linux/device.h>
#include <linux/ioport.h>
#include <linux/module.h>
+#include <linux/uaccess.h>
#include <asm/dma.h>
-#include <asm/uaccess.h>
#define MODULE_VER "v0.1"
spin_unlock_irq(&coreb_lock);
return 0;
- out_busy:
+ out_busy:
spin_unlock_irq(&coreb_lock);
return -EBUSY;
}
printk(KERN_INFO "BF561 Core B driver %s initialized.\n", MODULE_VER);
return 0;
- release_dma_src:
+ release_dma_src:
free_dma(CH_MEM_STREAM2_SRC);
- release_dma_dest:
+ release_dma_dest:
free_dma(CH_MEM_STREAM2_DEST);
- release_data_a_sram:
+ release_data_a_sram:
release_mem_region(0xff400000, 0x8000);
- release_data_b_sram:
+ release_data_b_sram:
release_mem_region(0xff500000, 0x8000);
- release_instruction_b_sram:
+ release_instruction_b_sram:
release_mem_region(0xff610000, 0x4000);
- release_instruction_a_sram:
+ release_instruction_a_sram:
release_mem_region(0xff600000, 0x4000);
- exit:
+ exit:
return -ENOMEM;
}
--- /dev/null
+/*
+ * File: arch/blackfin/mach-bf561/dma.c
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: This file contains the simple DMA Implementation for Blackfin
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+
+struct dma_register *base_addr[MAX_BLACKFIN_DMA_CHANNEL] = {
+ (struct dma_register *) DMA1_0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_7_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA1_11_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_0_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_1_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_2_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_3_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_4_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_5_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_6_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_7_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_8_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_9_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_10_NEXT_DESC_PTR,
+ (struct dma_register *) DMA2_11_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA1_S1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_D0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_S0_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_D1_NEXT_DESC_PTR,
+ (struct dma_register *) MDMA2_S1_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_D0_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_S0_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_D1_NEXT_DESC_PTR,
+ (struct dma_register *) IMDMA_S1_NEXT_DESC_PTR,
+};
+
+int channel2irq(unsigned int channel)
+{
+ int ret_irq = -1;
+
+ switch (channel) {
+ case CH_PPI0:
+ ret_irq = IRQ_PPI0;
+ break;
+ case CH_PPI1:
+ ret_irq = IRQ_PPI1;
+ break;
+ case CH_SPORT0_RX:
+ ret_irq = IRQ_SPORT0_RX;
+ break;
+ case CH_SPORT0_TX:
+ ret_irq = IRQ_SPORT0_TX;
+ break;
+ case CH_SPORT1_RX:
+ ret_irq = IRQ_SPORT1_RX;
+ break;
+ case CH_SPORT1_TX:
+ ret_irq = IRQ_SPORT1_TX;
+ break;
+ case CH_SPI:
+ ret_irq = IRQ_SPI;
+ break;
+ case CH_UART_RX:
+ ret_irq = IRQ_UART_RX;
+ break;
+ case CH_UART_TX:
+ ret_irq = IRQ_UART_TX;
+ break;
+
+ case CH_MEM_STREAM0_SRC:
+ case CH_MEM_STREAM0_DEST:
+ ret_irq = IRQ_MEM_DMA0;
+ break;
+ case CH_MEM_STREAM1_SRC:
+ case CH_MEM_STREAM1_DEST:
+ ret_irq = IRQ_MEM_DMA1;
+ break;
+ case CH_MEM_STREAM2_SRC:
+ case CH_MEM_STREAM2_DEST:
+ ret_irq = IRQ_MEM_DMA2;
+ break;
+ case CH_MEM_STREAM3_SRC:
+ case CH_MEM_STREAM3_DEST:
+ ret_irq = IRQ_MEM_DMA3;
+ break;
+
+ case CH_IMEM_STREAM0_SRC:
+ case CH_IMEM_STREAM0_DEST:
+ ret_irq = IRQ_IMEM_DMA0;
+ break;
+ case CH_IMEM_STREAM1_SRC:
+ case CH_IMEM_STREAM1_DEST:
+ ret_irq = IRQ_IMEM_DMA1;
+ break;
+ }
+ return ret_irq;
+}
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/blackfin.h>
+#include <asm/trace.h>
+
#if CONFIG_BFIN_KERNEL_CLOCK
#include <asm/mach/mem_init.h>
#endif
M2 = r0;
M3 = r0;
+ trace_buffer_start(p0,r0);
+ P0 = R1;
+ R0 = R1;
+
/* Turn off the icache */
p0.l = (IMEM_CONTROL & 0xFFFF);
p0.h = (IMEM_CONTROL >> 16);
*/
#include <linux/module.h>
+#include <linux/irq.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
void program_IAR(void)
{
obj-y := \
cache.o cacheinit.o cplbhdlr.o cplbmgr.o entry.o \
- interrupt.o lock.o dpmc.o irqpanic.o
+ interrupt.o lock.o irqpanic.o
obj-$(CONFIG_CPLB_INFO) += cplbinfo.o
obj-$(CONFIG_BFIN_SINGLE_CORE) += ints-priority-sc.o
obj-$(CONFIG_BFIN_DUAL_CORE) += ints-priority-dc.o
-obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += pm.o dpmc.o
.text
+#ifdef ANOMALY_05000125
#if defined(CONFIG_BLKFIN_CACHE)
-ENTRY(_bfin_icache_init)
+ENTRY(_bfin_write_IMEM_CONTROL)
- /* Initialize Instruction CPLBS */
-
- I0.L = (ICPLB_ADDR0 & 0xFFFF);
- I0.H = (ICPLB_ADDR0 >> 16);
-
- I1.L = (ICPLB_DATA0 & 0xFFFF);
- I1.H = (ICPLB_DATA0 >> 16);
-
- I2.L = _icplb_table;
- I2.H = _icplb_table;
-
- r1 = -1; /* end point comparison */
- r3 = 15; /* max counter */
-
-/* read entries from table */
-
-.Lread_iaddr:
- R0 = [I2++];
- CC = R0 == R1;
- IF CC JUMP .Lidone;
- [I0++] = R0;
-
-.Lread_idata:
- R2 = [I2++];
- [I1++] = R2;
- R3 = R3 + R1;
- CC = R3 == R1;
- IF !CC JUMP .Lread_iaddr;
-
-.Lidone:
/* Enable Instruction Cache */
P0.l = (IMEM_CONTROL & 0xFFFF);
P0.h = (IMEM_CONTROL >> 16);
- R1 = [P0];
- R0 = (IMC | ENICPLB);
- R0 = R0 | R1;
/* Anomaly 05000125 */
- CLI R2;
+ CLI R1;
SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */
.align 8;
[P0] = R0;
SSYNC;
- STI R2;
+ STI R1;
RTS;
-ENDPROC(_bfin_icache_init)
+ENDPROC(_bfin_write_IMEM_CONTROL)
#endif
#if defined(CONFIG_BLKFIN_DCACHE)
-ENTRY(_bfin_dcache_init)
-
- /* Initialize Data CPLBS */
-
- I0.L = (DCPLB_ADDR0 & 0xFFFF);
- I0.H = (DCPLB_ADDR0 >> 16);
-
- I1.L = (DCPLB_DATA0 & 0xFFFF);
- I1.H = (DCPLB_DATA0 >> 16);
-
- I2.L = _dcplb_table;
- I2.H = _dcplb_table;
-
- R1 = -1; /* end point comparison */
- R3 = 15; /* max counter */
-
- /* read entries from table */
-.Lread_daddr:
- R0 = [I2++];
- cc = R0 == R1;
- IF CC JUMP .Lddone;
- [I0++] = R0;
-
-.Lread_ddata:
- R2 = [I2++];
- [I1++] = R2;
- R3 = R3 + R1;
- CC = R3 == R1;
- IF !CC JUMP .Lread_daddr;
-.Lddone:
- P0.L = (DMEM_CONTROL & 0xFFFF);
- P0.H = (DMEM_CONTROL >> 16);
- R1 = [P0];
-
- R0 = DMEM_CNTR;
-
- R0 = R0 | R1;
- /* Anomaly 05000125 */
- CLI R2;
+ENTRY(_bfin_write_DMEM_CONTROL)
+ CLI R1;
SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */
.align 8;
[P0] = R0;
SSYNC;
- STI R2;
+ STI R1;
RTS;
-ENDPROC(_bfin_dcache_init)
+ENDPROC(_bfin_write_DMEM_CONTROL)
+#endif
+
#endif
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
+#include <linux/uaccess.h>
#include <asm/current.h>
-#include <asm/uaccess.h>
#include <asm/system.h>
-
#include <asm/cplb.h>
#include <asm/blackfin.h>
} else
buf += sprintf(buf, "Data CPLB entry:\n");
- buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\
-\tiCount\toCount\n");
+ buf += sprintf(buf, "Address\t\tData\tSize\tValid\tLocked\tSwapin\n\tiCount\toCount\n");
while (*p_addr != 0xffffffff) {
entry = cplb_find_entry(cplb_addr, cplb_data, *p_addr, *p_data);
p = buf;
- p += sprintf(p,
- "------------------ CPLB Information ------------------\n\n");
+ p += sprintf(p, "------------------ CPLB Information ------------------\n\n");
if (bfin_read_IMEM_CONTROL() & ENICPLB)
p = cplb_print_entry(p, CPLB_I);
{
struct proc_dir_entry *entry;
- if ((entry = create_proc_entry("cplbinfo", 0, NULL)) == NULL) {
+ entry = create_proc_entry("cplbinfo", 0, NULL);
+ if (!entry)
return -ENOMEM;
- }
entry->read_proc = cplbinfo_read_proc;
entry->write_proc = cplbinfo_write_proc;
#include <linux/linkage.h>
+#include <linux/unistd.h>
#include <asm/blackfin.h>
-#include <asm/unistd.h>
#include <asm/errno.h>
#include <asm/thread_info.h> /* TIF_NEED_RESCHED */
#include <asm/asm-offsets.h>
+#include <asm/trace.h>
#include <asm/mach-common/context.S>
-#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
- /*
- * TODO: this should be proper save/restore, but for now
- * we'll just cheat and use 0x1/0x13
- */
-# define DEBUG_START_HWTRACE \
- P5.l = LO(TBUFCTL); \
- P5.h = HI(TBUFCTL); \
- R7 = 0x13; \
- [P5] = R7;
-# define DEBUG_STOP_HWTRACE \
- P5.l = LO(TBUFCTL); \
- P5.h = HI(TBUFCTL); \
- R7 = 0x01; \
- [P5] = R7;
-#else
-# define DEBUG_START_HWTRACE
-# define DEBUG_STOP_HWTRACE
-#endif
-
#ifdef CONFIG_EXCPT_IRQ_SYSC_L1
.section .l1.text
#else
ASTAT = [sp++];
SAVE_ALL_SYS
call __cplb_hdr;
- DEBUG_START_HWTRACE
+ DEBUG_START_HWTRACE(p5, r7)
RESTORE_ALL_SYS
SP = RETN;
rtx;
ENDPROC(_ex_icplb)
-ENTRY(_ex_spinlock)
- /* Transform this into a syscall - twiddle the syscall vector. */
- p5.l = lo(EVT15);
- p5.h = hi(EVT15);
- r7.l = _spinlock_bh;
- r7.h = _spinlock_bh;
- [p5] = r7;
- csync;
- /* Fall through. */
-ENDPROC(_ex_spinlock)
-
ENTRY(_ex_syscall)
- DEBUG_START_HWTRACE
+ DEBUG_START_HWTRACE(p5, r7)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
raise 15; /* invoked by TRAP #0, for sys call */
rtx
ENDPROC(_ex_syscall)
-ENTRY(_spinlock_bh)
- SAVE_ALL_SYS
- /* To end up here, vector 15 was changed - so we have to change it
- * back.
- */
- p0.l = lo(EVT15);
- p0.h = hi(EVT15);
- p1.l = _evt_system_call;
- p1.h = _evt_system_call;
- [p0] = p1;
- csync;
- r0 = [sp + PT_R0];
- sp += -12;
- call _sys_bfin_spinlock;
- sp += 12;
- [SP + PT_R0] = R0;
- RESTORE_ALL_SYS
- rti;
-ENDPROC(_spinlock_bh)
-
ENTRY(_ex_soft_bp)
r7 = retx;
r7 += -2;
if !cc jump _ex_trap_c;
_return_from_exception:
- DEBUG_START_HWTRACE
+ DEBUG_START_HWTRACE(p5, r7)
#ifdef ANOMALY_05000257
R7=LC0;
LC0=R7;
* need to make a CPLB exception look like a normal exception
*/
- DEBUG_START_HWTRACE
+ DEBUG_START_HWTRACE(p5, r7)
RESTORE_ALL_SYS
[--sp] = ASTAT;
[--sp] = (R7:6, P5:4);
R6 = SEQSTAT;
[P5] = R6;
- DEBUG_START_HWTRACE
+ DEBUG_START_HWTRACE(p5, r7)
(R7:6,P5:4) = [sp++];
ASTAT = [sp++];
SP = RETN;
/* Try to deal with syscalls quickly. */
[--sp] = ASTAT;
[--sp] = (R7:6, P5:4);
- DEBUG_STOP_HWTRACE
+ DEBUG_STOP_HWTRACE(p5, r7)
r7 = SEQSTAT; /* reason code is in bit 5:0 */
r6.l = lo(SEQSTAT_EXCAUSE);
r6.h = hi(SEQSTAT_EXCAUSE);
r0 = [p0];
sti r0;
+ r0 = sp;
+ sp += -12;
+ call _finish_atomic_sections;
+ sp += 12;
jump.s .Lresume_userspace;
_schedule_and_signal:
ALIGN
_extable:
/* entry for each EXCAUSE[5:0]
- * This table bmust be in sync with the table in ./kernel/traps.c
+ * This table must be in sync with the table in ./kernel/traps.c
* EXCPT instruction can provide 4 bits of EXCAUSE, allowing 16 to be user defined
*/
.long _ex_syscall; /* 0x00 - User Defined - Linux Syscall */
.long _ex_soft_bp /* 0x01 - User Defined - Software breakpoint */
.long _ex_trap_c /* 0x02 - User Defined */
- .long _ex_trap_c /* 0x03 - User Defined - Atomic test and set service */
- .long _ex_spinlock /* 0x04 - User Defined */
+ .long _ex_trap_c /* 0x03 - User Defined - userspace stack overflow */
+ .long _ex_trap_c /* 0x04 - User Defined */
.long _ex_trap_c /* 0x05 - User Defined */
.long _ex_trap_c /* 0x06 - User Defined */
.long _ex_trap_c /* 0x07 - User Defined */
#include <linux/linkage.h>
#include <asm/entry.h>
#include <asm/asm-offsets.h>
+#include <asm/trace.h>
#include <asm/mach-common/context.S>
r7.l = W[p5];
1:
#endif
- p0.l = lo(TBUFCTL);
- p0.h = hi(TBUFCTL);
- r0 = 1;
- [p0] = r0;
+
+ trace_buffer_stop(p0, r0);
+
r0 = IRQ_HWERR;
r1 = sp;
{
u16 gpionr = irq - IRQ_PF0;
- if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
set_gpio_data(gpionr, 0);
SSYNC();
}
{
u16 gpionr = irq - IRQ_PF0;
- if(gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
+ if (gpio_edge_triggered[gpio_bank(gpionr)] & gpio_bit(gpionr)) {
set_gpio_data(gpionr, 0);
SSYNC();
}
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
ret = gpio_request(gpionr, NULL);
- if(ret)
+ if (ret)
return ret;
}
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
ret = gpio_request(gpionr, NULL);
- if(ret)
+ if (ret)
return ret;
}
bfin_write_SICA_IMASK1(SIC_UNMASK_ALL);
SSYNC();
+ bfin_write_SICA_IWR0(IWR_ENABLE_ALL);
+ bfin_write_SICA_IWR1(IWR_ENABLE_ALL);
+
local_irq_disable();
init_exception_buff();
bfin_write_EVT15(evt_system_call);
CSYNC();
- for (irq = 0; irq < SYS_IRQS; irq++) {
+ for (irq = 0; irq <= SYS_IRQS; irq++) {
if (irq <= IRQ_CORETMR)
set_irq_chip(irq, &bf561_core_irqchip);
else
* 2002 Arcturus Networks Inc. MaTed <mated@sympatico.ca>
* 2003 Metrowerks/Motorola
* 2003 Bas Vermeulen <bas@buyways.nl>
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2007 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
struct ivgx {
/* irq number for request_irq, available in mach-bf533/irq.h */
- int irqno;
+ unsigned int irqno;
/* corresponding bit in the SIC_ISR register */
- int isrflag;
+ unsigned int isrflag;
} ivg_table[NR_PERI_INTS];
struct ivg_slice {
for (ivg = 0; ivg <= IVG13 - IVG7; ivg++) {
int irqn;
- ivg7_13[ivg].istop = ivg7_13[ivg].ifirst =
- &ivg_table[irq_pos];
+ ivg7_13[ivg].istop = ivg7_13[ivg].ifirst = &ivg_table[irq_pos];
for (irqn = 0; irqn < NR_PERI_INTS; irqn++) {
int iar_shift = (irqn & 7) * 4;
if (ivg ==
(0xf &
- bfin_read32((unsigned long *) SIC_IAR0 +
+ bfin_read32((unsigned long *)SIC_IAR0 +
(irqn >> 3)) >> iar_shift)) {
ivg_table[irq_pos].irqno = IVG7 + irqn;
- ivg_table[irq_pos].isrflag = 1 << irqn;
+ ivg_table[irq_pos].isrflag = 1 << (irqn % 32);
ivg7_13[ivg].istop++;
irq_pos++;
}
static void bfin_internal_mask_irq(unsigned int irq)
{
+#ifndef CONFIG_BF54x
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() &
~(1 << (irq - (IRQ_CORETMR + 1))));
+#else
+ unsigned mask_bank, mask_bit;
+ mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
+ mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+ bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) &
+ ~(1 << mask_bit));
+#endif
SSYNC();
}
static void bfin_internal_unmask_irq(unsigned int irq)
{
+#ifndef CONFIG_BF54x
bfin_write_SIC_IMASK(bfin_read_SIC_IMASK() |
(1 << (irq - (IRQ_CORETMR + 1))));
+#else
+ unsigned mask_bank, mask_bit;
+ mask_bank = (irq - (IRQ_CORETMR + 1)) / 32;
+ mask_bit = (irq - (IRQ_CORETMR + 1)) % 32;
+ bfin_write_SIC_IMASK(mask_bank, bfin_read_SIC_IMASK(mask_bank) |
+ (1 << mask_bit));
+#endif
SSYNC();
}
};
static void bfin_demux_error_irq(unsigned int int_err_irq,
- struct irq_desc *intb_desc)
+ struct irq_desc *intb_desc)
{
int irq = 0;
}
pr_debug("IRQ %d:"
- " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
- irq);
+ " MASKED PERIPHERAL ERROR INTERRUPT ASSERTED\n",
+ irq);
}
} else
printk(KERN_ERR
" INTERRUPT ASSERTED BUT NO SOURCE FOUND\n",
__FUNCTION__, __FILE__, __LINE__);
-
}
#endif /* BF537_GENERIC_ERROR_INT_DEMUX */
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && !defined(CONFIG_BF54x)
static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
static unsigned short gpio_edge_triggered[gpio_bank(MAX_BLACKFIN_GPIOS)];
}
if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
- IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
- {
+ IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
ret = gpio_request(gpionr, NULL);
if (ret)
return 0;
}
-
static struct irq_chip bfin_gpio_irqchip = {
.ack = bfin_gpio_ack_irq,
.mask = bfin_gpio_mask_irq,
};
static void bfin_demux_gpio_irq(unsigned int intb_irq,
- struct irq_desc *intb_desc)
+ struct irq_desc *intb_desc)
{
u16 i;
+ struct irq_desc *desc;
- for (i = 0; i < MAX_BLACKFIN_GPIOS; i+=16) {
+ for (i = 0; i < MAX_BLACKFIN_GPIOS; i += 16) {
int irq = IRQ_PF0 + i;
int flag_d = get_gpiop_data(i);
int mask =
- flag_d & (gpio_enabled[gpio_bank(i)] &
- get_gpiop_maska(i));
+ flag_d & (gpio_enabled[gpio_bank(i)] & get_gpiop_maska(i));
while (mask) {
if (mask & 1) {
- struct irq_desc *desc = irq_desc + irq;
+ desc = irq_desc + irq;
desc->handle_irq(irq, desc);
}
irq++;
}
}
+#else /* CONFIG_IRQCHIP_DEMUX_GPIO */
+
+#define NR_PINT_SYS_IRQS 4
+#define NR_PINT_BITS 32
+#define NR_PINTS 160
+#define IRQ_NOT_AVAIL 0xFF
+
+#define PINT_2_BANK(x) ((x) >> 5)
+#define PINT_2_BIT(x) ((x) & 0x1F)
+#define PINT_BIT(x) (1 << (PINT_2_BIT(x)))
+
+static unsigned char irq2pint_lut[NR_PINTS];
+static unsigned char pint2irq_lut[NR_PINT_SYS_IRQS * NR_PINT_BITS];
+
+struct pin_int_t {
+ unsigned int mask_set;
+ unsigned int mask_clear;
+ unsigned int request;
+ unsigned int assign;
+ unsigned int edge_set;
+ unsigned int edge_clear;
+ unsigned int invert_set;
+ unsigned int invert_clear;
+ unsigned int pinstate;
+ unsigned int latch;
+};
+
+static struct pin_int_t *pint[NR_PINT_SYS_IRQS] = {
+ (struct pin_int_t *)PINT0_MASK_SET,
+ (struct pin_int_t *)PINT1_MASK_SET,
+ (struct pin_int_t *)PINT2_MASK_SET,
+ (struct pin_int_t *)PINT3_MASK_SET,
+};
+
+unsigned short get_irq_base(u8 bank, u8 bmap)
+{
+
+ u16 irq_base;
+
+ if (bank < 2) { /*PA-PB */
+ irq_base = IRQ_PA0 + bmap * 16;
+ } else { /*PC-PJ */
+ irq_base = IRQ_PC0 + bmap * 16;
+ }
+
+ return irq_base;
+
+}
+
+ /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
+void init_pint_lut(void)
+{
+ u16 bank, bit, irq_base, bit_pos;
+ u32 pint_assign;
+ u8 bmap;
+
+ memset(irq2pint_lut, IRQ_NOT_AVAIL, sizeof(irq2pint_lut));
+
+ for (bank = 0; bank < NR_PINT_SYS_IRQS; bank++) {
+
+ pint_assign = pint[bank]->assign;
+
+ for (bit = 0; bit < NR_PINT_BITS; bit++) {
+
+ bmap = (pint_assign >> ((bit / 8) * 8)) & 0xFF;
+
+ irq_base = get_irq_base(bank, bmap);
+
+ irq_base += (bit % 8) + ((bit / 8) & 1 ? 8 : 0);
+ bit_pos = bit + bank * NR_PINT_BITS;
+
+ pint2irq_lut[bit_pos] = irq_base - SYS_IRQS;
+ irq2pint_lut[irq_base - SYS_IRQS] = bit_pos;
+
+ }
+
+ }
+
+}
+
+static unsigned short gpio_enabled[gpio_bank(MAX_BLACKFIN_GPIOS)];
+
+static void bfin_gpio_ack_irq(unsigned int irq)
+{
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+ pint[PINT_2_BANK(pint_val)]->request = PINT_BIT(pint_val);
+ SSYNC();
+}
+
+static void bfin_gpio_mask_ack_irq(unsigned int irq)
+{
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+ u32 pintbit = PINT_BIT(pint_val);
+ u8 bank = PINT_2_BANK(pint_val);
+
+ pint[bank]->request = pintbit;
+ pint[bank]->mask_clear = pintbit;
+ SSYNC();
+}
+
+static void bfin_gpio_mask_irq(unsigned int irq)
+{
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+ pint[PINT_2_BANK(pint_val)]->mask_clear = PINT_BIT(pint_val);
+ SSYNC();
+}
+
+static void bfin_gpio_unmask_irq(unsigned int irq)
+{
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+ u32 pintbit = PINT_BIT(pint_val);
+ u8 bank = PINT_2_BANK(pint_val);
+
+ pint[bank]->request = pintbit;
+ pint[bank]->mask_set = pintbit;
+ SSYNC();
+}
+
+static unsigned int bfin_gpio_irq_startup(unsigned int irq)
+{
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PA0;
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+
+ if (pint_val == IRQ_NOT_AVAIL)
+ return -ENODEV;
+
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ ret = gpio_request(gpionr, NULL);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ bfin_gpio_unmask_irq(irq);
+
+ return ret;
+}
+
+static void bfin_gpio_irq_shutdown(unsigned int irq)
+{
+ bfin_gpio_mask_irq(irq);
+ gpio_free(irq - IRQ_PA0);
+ gpio_enabled[gpio_bank(irq - IRQ_PA0)] &= ~gpio_bit(irq - IRQ_PA0);
+}
+
+static int bfin_gpio_irq_type(unsigned int irq, unsigned int type)
+{
+
+ unsigned int ret;
+ u16 gpionr = irq - IRQ_PA0;
+ u8 pint_val = irq2pint_lut[irq - SYS_IRQS];
+ u32 pintbit = PINT_BIT(pint_val);
+ u8 bank = PINT_2_BANK(pint_val);
+
+ if (pint_val == IRQ_NOT_AVAIL)
+ return -ENODEV;
+
+ if (type == IRQ_TYPE_PROBE) {
+ /* only probe unenabled GPIO interrupt lines */
+ if (gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))
+ return 0;
+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
+ }
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING |
+ IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW)) {
+ if (!(gpio_enabled[gpio_bank(gpionr)] & gpio_bit(gpionr))) {
+ ret = gpio_request(gpionr, NULL);
+ if (ret)
+ return ret;
+ }
+
+ gpio_enabled[gpio_bank(gpionr)] |= gpio_bit(gpionr);
+ } else {
+ gpio_enabled[gpio_bank(gpionr)] &= ~gpio_bit(gpionr);
+ return 0;
+ }
+
+ gpio_direction_input(gpionr);
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING)) {
+ pint[bank]->edge_set = pintbit;
+ } else {
+ pint[bank]->edge_clear = pintbit;
+ }
+
+ if ((type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_LEVEL_LOW)))
+ pint[bank]->invert_set = pintbit; /* low or falling edge denoted by one */
+ else
+ pint[bank]->invert_set = pintbit; /* high or rising edge denoted by zero */
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ pint[bank]->invert_set = pintbit;
+ else
+ pint[bank]->invert_set = pintbit;
+
+ SSYNC();
+
+ if (type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING))
+ set_irq_handler(irq, handle_edge_irq);
+ else
+ set_irq_handler(irq, handle_level_irq);
+
+ return 0;
+}
+
+static struct irq_chip bfin_gpio_irqchip = {
+ .ack = bfin_gpio_ack_irq,
+ .mask = bfin_gpio_mask_irq,
+ .mask_ack = bfin_gpio_mask_ack_irq,
+ .unmask = bfin_gpio_unmask_irq,
+ .set_type = bfin_gpio_irq_type,
+ .startup = bfin_gpio_irq_startup,
+ .shutdown = bfin_gpio_irq_shutdown
+};
+
+static void bfin_demux_gpio_irq(unsigned int intb_irq,
+ struct irq_desc *intb_desc)
+{
+ u8 bank, pint_val;
+ u32 request, irq;
+ struct irq_desc *desc;
+
+ switch (intb_irq) {
+ case IRQ_PINT0:
+ bank = 0;
+ break;
+ case IRQ_PINT2:
+ bank = 2;
+ break;
+ case IRQ_PINT3:
+ bank = 3;
+ break;
+ case IRQ_PINT1:
+ bank = 1;
+ break;
+ default:
+ return;
+ }
+
+ pint_val = bank * NR_PINT_BITS;
+
+ request = pint[bank]->request;
+
+ while (request) {
+ if (request & 1) {
+ irq = pint2irq_lut[pint_val] + SYS_IRQS;
+ desc = irq_desc + irq;
+ desc->handle_irq(irq, desc);
+ }
+ pint_val++;
+ request >>= 1;
+ }
+
+}
#endif /* CONFIG_IRQCHIP_DEMUX_GPIO */
/*
int irq;
unsigned long ilat = 0;
/* Disable all the peripheral intrs - page 4-29 HW Ref manual */
+#ifdef CONFIG_BF54x
+ bfin_write_SIC_IMASK0(SIC_UNMASK_ALL);
+ bfin_write_SIC_IMASK1(SIC_UNMASK_ALL);
+ bfin_write_SIC_IMASK2(SIC_UNMASK_ALL);
+ bfin_write_SIC_IWR0(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR1(IWR_ENABLE_ALL);
+ bfin_write_SIC_IWR2(IWR_ENABLE_ALL);
+#else
bfin_write_SIC_IMASK(SIC_UNMASK_ALL);
+ bfin_write_SIC_IWR(IWR_ENABLE_ALL);
+#endif
+
SSYNC();
local_irq_disable();
bfin_write_EVT15(evt_system_call);
CSYNC();
- for (irq = 0; irq < SYS_IRQS; irq++) {
+#if defined(CONFIG_IRQCHIP_DEMUX_GPIO) && defined(CONFIG_BF54x)
+#ifdef CONFIG_PINTx_REASSIGN
+ pint[0]->assign = CONFIG_PINT0_ASSIGN;
+ pint[1]->assign = CONFIG_PINT1_ASSIGN;
+ pint[2]->assign = CONFIG_PINT2_ASSIGN;
+ pint[3]->assign = CONFIG_PINT3_ASSIGN;
+#endif
+ /* Whenever PINTx_ASSIGN is altered init_pint_lut() must be executed! */
+ init_pint_lut();
+#endif
+
+ for (irq = 0; irq <= SYS_IRQS; irq++) {
if (irq <= IRQ_CORETMR)
set_irq_chip(irq, &bfin_core_irqchip);
else
if (irq != IRQ_GENERIC_ERROR) {
#endif
+ switch (irq) {
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
- if ((irq != IRQ_PROG_INTA) /*PORT F & G MASK_A Interrupt*/
-# if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
- && (irq != IRQ_MAC_RX) /*PORT H MASK_A Interrupt*/
-# endif
- ) {
+#ifndef CONFIG_BF54x
+ case IRQ_PROG_INTA:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+#if defined(BF537_FAMILY) && !(defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE))
+ case IRQ_MAC_RX:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
#endif
- set_irq_handler(irq, handle_simple_irq);
-#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
- } else {
+#else
+ case IRQ_PINT0:
set_irq_chained_handler(irq,
bfin_demux_gpio_irq);
- }
+ break;
+ case IRQ_PINT1:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PINT2:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+ case IRQ_PINT3:
+ set_irq_chained_handler(irq,
+ bfin_demux_gpio_irq);
+ break;
+#endif /*CONFIG_BF54x */
#endif
+ default:
+ set_irq_handler(irq, handle_simple_irq);
+ break;
+ }
#ifdef BF537_GENERIC_ERROR_INT_DEMUX
} else {
#endif
#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+#ifndef CONFIG_BF54x
for (irq = IRQ_PF0; irq < NR_IRQS; irq++) {
+#else
+ for (irq = IRQ_PA0; irq < NR_IRQS; irq++) {
+#endif
set_irq_chip(irq, &bfin_gpio_irqchip);
/* if configured as edge, then will be changed to do_edge_IRQ */
set_irq_handler(irq, handle_level_irq);
bfin_write_ILAT(ilat);
CSYNC();
- printk(KERN_INFO
- "Configuring Blackfin Priority Driven Interrupts\n");
+ printk(KERN_INFO "Configuring Blackfin Priority Driven Interrupts\n");
/* IMASK=xxx is equivalent to STI xx or irq_flags=xx,
* local_irq_enable()
*/
/* Enable interrupts IVG7-15 */
irq_flags = irq_flags | IMASK_IVG15 |
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
- IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 |
- IMASK_IVGHW;
+ IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
return 0;
}
#ifdef CONFIG_DO_IRQ_L1
-void do_irq(int vec, struct pt_regs *fp)__attribute__((l1_text));
+void do_irq(int vec, struct pt_regs *fp) __attribute__((l1_text));
#endif
void do_irq(int vec, struct pt_regs *fp)
} else {
struct ivgx *ivg = ivg7_13[vec - IVG7].ifirst;
struct ivgx *ivg_stop = ivg7_13[vec - IVG7].istop;
- unsigned long sic_status;
+#ifdef CONFIG_BF54x
+ unsigned long sic_status[3];
+ SSYNC();
+ sic_status[0] = bfin_read_SIC_ISR(0) & bfin_read_SIC_IMASK(0);
+ sic_status[1] = bfin_read_SIC_ISR(1) & bfin_read_SIC_IMASK(1);
+ sic_status[2] = bfin_read_SIC_ISR(2) & bfin_read_SIC_IMASK(2);
+
+ for (;; ivg++) {
+ if (ivg >= ivg_stop) {
+ atomic_inc(&num_spurious);
+ return;
+ }
+ if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag)
+ break;
+ }
+#else
+ unsigned long sic_status;
SSYNC();
sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR();
} else if (sic_status & ivg->isrflag)
break;
}
+#endif
vec = ivg->irqno;
}
asm_do_IRQ(vec, fp);
#include <linux/pm.h>
#include <linux/sched.h>
#include <linux/proc_fs.h>
+#include <linux/io.h>
+#include <linux/irq.h>
-#include <asm/io.h>
#include <asm/dpmc.h>
-#include <asm/irq.h>
#include <asm/gpio.h>
#ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H
L1_SCRATCH_LENGTH >> 10);
memset(&l1_ssram, 0x00, sizeof(l1_ssram));
- l1_ssram[0].paddr = (void*)L1_SCRATCH_START;
+ l1_ssram[0].paddr = (void *)L1_SCRATCH_START;
l1_ssram[0].size = L1_SCRATCH_LENGTH;
l1_ssram[0].flag = SRAM_SLT_FREE;
{
#if L1_CODE_LENGTH != 0
memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram));
- l1_inst_sram[0].paddr = (void*)L1_CODE_START + (_etext_l1 - _stext_l1);
+ l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1);
l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1);
l1_inst_sram[0].flag = SRAM_SLT_FREE;
#include <linux/swap.h>
#include <linux/bootmem.h>
+#include <linux/uaccess.h>
#include <asm/bfin-global.h>
-#include <asm/uaccess.h>
#include <asm/l1layout.h>
#include "blackfin_sram.h"
}
}
-#ifdef CONFIG_BLK_DEV_INITRD
-void __init free_initrd_mem(unsigned long start, unsigned long end)
+static __init void free_init_pages(const char *what, unsigned long begin, unsigned long end)
{
- int pages = 0;
- for (; start < end; start += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(start));
- init_page_count(virt_to_page(start));
- free_page(start);
+ unsigned long addr;
+ /* next to check that the page we free is not a partial page */
+ for (addr = begin; addr + PAGE_SIZE <= end; addr += PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ free_page(addr);
totalram_pages++;
- pages++;
}
- printk(KERN_NOTICE "Freeing initrd memory: %dk freed\n", pages);
+ printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init free_initrd_mem(unsigned long start, unsigned long end)
+{
+ free_init_pages("initrd memory", start, end);
}
#endif
void __init free_initmem(void)
{
#ifdef CONFIG_RAMKERNEL
- unsigned long addr;
- /*
- * the following code should be cool even if these sections
- * are not page aligned.
- */
- addr = PAGE_ALIGN((unsigned long)(__init_begin));
- /* next to check that the page we free is not a partial page */
- for (; addr + PAGE_SIZE < (unsigned long)(__init_end);
- addr += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(addr));
- init_page_count(virt_to_page(addr));
- free_page(addr);
- totalram_pages++;
- }
- printk(KERN_NOTICE
- "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
- (addr - PAGE_ALIGN((long)__init_begin)) >> 10,
- (int)(PAGE_ALIGN((unsigned long)(__init_begin))),
- (int)(addr - PAGE_SIZE));
+ free_init_pages("unused kernel memory",
+ (unsigned long)(&__init_begin),
+ (unsigned long)(&__init_end));
#endif
}
#include <linux/smp.h>
#include <linux/errno.h>
#include <linux/mutex.h>
+#include <linux/ptrace.h>
+#include <linux/irq.h>
+#include <linux/io.h>
-#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
-#include <asm/io.h>
#include "op_blackfin.h"
#include <linux/init.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
-#include <asm/ptrace.h>
+#include <linux/ptrace.h>
+#include <linux/irq.h>
+#include <linux/io.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/blackfin.h>
-#include <asm/irq.h>
-#include <asm/io.h>
#include "op_blackfin.h"
#include <linux/smp.h>
#include <linux/irq.h>
#include <linux/oprofile.h>
-
-#include <asm/ptrace.h>
+#include <linux/ptrace.h>
static void enable_sys_timer0()
{
depends on (MK7 || MPENTIUM4 || MPENTIUMM || MPENTIUMIII || MPENTIUMII || M686 || MVIAC3_2 || MVIAC7)
default y
-config X86_MINIMUM_CPU_MODEL
+config X86_MINIMUM_CPU_FAMILY
int
- default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP
- default "0"
+ default "4" if X86_XADD || X86_CMPXCHG || X86_BSWAP || X86_WP_WORKS_OK
+ default "3"
#RAMDISK := -DRAMDISK=512
-targets := vmlinux.bin bootsect bootsect.o \
- setup setup.o zImage bzImage
+targets := vmlinux.bin setup.bin setup.elf zImage bzImage
subdir- := compressed
+setup-y += a20.o apm.o cmdline.o copy.o cpu.o cpucheck.o edd.o
+setup-y += header.o main.o mca.o memory.o pm.o pmjump.o
+setup-y += printf.o string.o tty.o video.o version.o voyager.o
+
+# The link order of the video-*.o modules can matter. In particular,
+# video-vga.o *must* be listed first, followed by video-vesa.o.
+# Hardware-specific drivers should follow in the order they should be
+# probed, and video-bios.o should typically be last.
+setup-y += video-vga.o
+setup-y += video-vesa.o
+setup-y += video-bios.o
+
hostprogs-y := tools/build
HOSTCFLAGS_build.o := $(LINUXINCLUDE)
# ---------------------------------------------------------------------------
+# How to compile the 16-bit code. Note we always compile for -march=i386,
+# that way we can complain to the user if the CPU is insufficient.
+cflags-i386 :=
+cflags-x86_64 := -m32
+CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
+ $(cflags-$(ARCH)) \
+ -Wall -Wstrict-prototypes \
+ -march=i386 -mregparm=3 \
+ -include $(srctree)/$(src)/code16gcc.h \
+ -fno-strict-aliasing -fomit-frame-pointer \
+ $(call cc-option, -ffreestanding) \
+ $(call cc-option, -fno-toplevel-reorder,\
+ $(call cc-option, -fno-unit-at-a-time)) \
+ $(call cc-option, -fno-stack-protector) \
+ $(call cc-option, -mpreferred-stack-boundary=2)
+AFLAGS := $(CFLAGS) -D__ASSEMBLY__
+
$(obj)/zImage: IMAGE_OFFSET := 0x1000
$(obj)/zImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK)
$(obj)/bzImage: IMAGE_OFFSET := 0x100000
+$(obj)/bzImage: EXTRA_CFLAGS := -D__BIG_KERNEL__
$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
$(obj)/bzImage: BUILDFLAGS := -b
quiet_cmd_image = BUILD $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
+cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
$(obj)/vmlinux.bin $(ROOT_DEV) > $@
-$(obj)/zImage $(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
+$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
$(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
-LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
-LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext
+SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
-$(obj)/setup $(obj)/bootsect: %: %.o FORCE
+LDFLAGS_setup.elf := -T
+$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
$(call if_changed,ld)
+OBJCOPYFLAGS_setup.bin := -O binary
+
+$(obj)/setup.bin: $(obj)/setup.elf FORCE
+ $(call if_changed,objcopy)
+
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/a20.c
+ *
+ * Enable A20 gate (return -1 on failure)
+ */
+
+#include "boot.h"
+
+#define MAX_8042_LOOPS 100000
+
+static int empty_8042(void)
+{
+ u8 status;
+ int loops = MAX_8042_LOOPS;
+
+ while (loops--) {
+ io_delay();
+
+ status = inb(0x64);
+ if (status & 1) {
+ /* Read and discard input data */
+ io_delay();
+ (void)inb(0x60);
+ } else if (!(status & 2)) {
+ /* Buffers empty, finished! */
+ return 0;
+ }
+ }
+
+ return -1;
+}
+
+/* Returns nonzero if the A20 line is enabled. The memory address
+ used as a test is the int $0x80 vector, which should be safe. */
+
+#define A20_TEST_ADDR (4*0x80)
+#define A20_TEST_SHORT 32
+#define A20_TEST_LONG 2097152 /* 2^21 */
+
+static int a20_test(int loops)
+{
+ int ok = 0;
+ int saved, ctr;
+
+ set_fs(0x0000);
+ set_gs(0xffff);
+
+ saved = ctr = rdfs32(A20_TEST_ADDR);
+
+ while (loops--) {
+ wrfs32(++ctr, A20_TEST_ADDR);
+ io_delay(); /* Serialize and make delay constant */
+ ok = rdgs32(A20_TEST_ADDR+0x10) ^ ctr;
+ if (ok)
+ break;
+ }
+
+ wrfs32(saved, A20_TEST_ADDR);
+ return ok;
+}
+
+/* Quick test to see if A20 is already enabled */
+static int a20_test_short(void)
+{
+ return a20_test(A20_TEST_SHORT);
+}
+
+/* Longer test that actually waits for A20 to come on line; this
+ is useful when dealing with the KBC or other slow external circuitry. */
+static int a20_test_long(void)
+{
+ return a20_test(A20_TEST_LONG);
+}
+
+static void enable_a20_bios(void)
+{
+ asm volatile("pushfl; int $0x15; popfl"
+ : : "a" ((u16)0x2401));
+}
+
+static void enable_a20_kbc(void)
+{
+ empty_8042();
+
+ outb(0xd1, 0x64); /* Command write */
+ empty_8042();
+
+ outb(0xdf, 0x60); /* A20 on */
+ empty_8042();
+}
+
+static void enable_a20_fast(void)
+{
+ u8 port_a;
+
+ port_a = inb(0x92); /* Configuration port A */
+ port_a |= 0x02; /* Enable A20 */
+ port_a &= ~0x01; /* Do not reset machine */
+ outb(port_a, 0x92);
+}
+
+/*
+ * Actual routine to enable A20; return 0 on ok, -1 on failure
+ */
+
+#define A20_ENABLE_LOOPS 255 /* Number of times to try */
+
+int enable_a20(void)
+{
+ int loops = A20_ENABLE_LOOPS;
+
+#if defined(CONFIG_X86_ELAN)
+ /* Elan croaks if we try to touch the KBC */
+ enable_a20_fast();
+ while (!a20_test_long())
+ ;
+ return 0;
+#elif defined(CONFIG_X86_VOYAGER)
+ /* On Voyager, a20_test() is unsafe? */
+ enable_a20_kbc();
+ return 0;
+#else
+ while (loops--) {
+ /* First, check to see if A20 is already enabled
+ (legacy free, etc.) */
+ if (a20_test_short())
+ return 0;
+
+ /* Next, try the BIOS (INT 0x15, AX=0x2401) */
+ enable_a20_bios();
+ if (a20_test_short())
+ return 0;
+
+ /* Try enabling A20 through the keyboard controller */
+ empty_8042();
+ if (a20_test_short())
+ return 0; /* BIOS worked, but with delayed reaction */
+
+ enable_a20_kbc();
+ if (a20_test_long())
+ return 0;
+
+ /* Finally, try enabling the "fast A20 gate" */
+ enable_a20_fast();
+ if (a20_test_long())
+ return 0;
+ }
+
+ return -1;
+#endif
+}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * Original APM BIOS checking by Stephen Rothwell, May 1994
+ * (sfr@canb.auug.org.au)
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/apm.c
+ *
+ * Get APM BIOS information
+ */
+
+#include "boot.h"
+
+#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
+
+int query_apm_bios(void)
+{
+ u16 ax, bx, cx, dx, di;
+ u32 ebx, esi;
+ u8 err;
+
+ /* APM BIOS installation check */
+ ax = 0x5300;
+ bx = cx = 0;
+ asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
+ : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
+ : : "esi", "edi");
+
+ if (err)
+ return -1; /* No APM BIOS */
+
+ if (bx != 0x504d) /* "PM" signature */
+ return -1;
+
+ if (cx & 0x02) /* 32 bits supported? */
+ return -1;
+
+ /* Disconnect first, just in case */
+ ax = 0x5304;
+ asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
+ : "+a" (ax)
+ : : "ebx", "ecx", "edx", "esi", "edi");
+
+ /* Paranoia */
+ ebx = esi = 0;
+ cx = dx = di = 0;
+
+ /* 32-bit connect */
+ asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %6"
+ : "=a" (ax), "+b" (ebx), "+c" (cx), "+d" (dx),
+ "+S" (esi), "+D" (di), "=m" (err)
+ : "a" (0x5303));
+
+ boot_params.apm_bios_info.cseg = ax;
+ boot_params.apm_bios_info.offset = ebx;
+ boot_params.apm_bios_info.cseg_16 = cx;
+ boot_params.apm_bios_info.dseg = dx;
+ boot_params.apm_bios_info.cseg_len = (u16)esi;
+ boot_params.apm_bios_info.cseg_16_len = esi >> 16;
+ boot_params.apm_bios_info.dseg_len = di;
+
+ if (err)
+ return -1;
+
+ /* Redo the installation check as the 32-bit connect;
+ some BIOSes return different flags this way... */
+
+ ax = 0x5300;
+ bx = cx = 0;
+ asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
+ : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
+ : : "esi", "edi");
+
+ if (err || bx != 0x504d) {
+ /* Failure with 32-bit connect, try to disconect and ignore */
+ ax = 0x5304;
+ bx = 0;
+ asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
+ : "+a" (ax), "+b" (bx)
+ : : "ecx", "edx", "esi", "edi");
+ return -1;
+ }
+
+ boot_params.apm_bios_info.version = ax;
+ boot_params.apm_bios_info.flags = cx;
+ return 0;
+}
+
+#endif
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/bitops.h
+ *
+ * Very simple bitops for the boot code.
+ */
+
+#ifndef BOOT_BITOPS_H
+#define BOOT_BITOPS_H
+#define _LINUX_BITOPS_H /* Inhibit inclusion of <linux/bitops.h> */
+
+static inline int constant_test_bit(int nr, const void *addr)
+{
+ const u32 *p = (const u32 *)addr;
+ return ((1UL << (nr & 31)) & (p[nr >> 5])) != 0;
+}
+static inline int variable_test_bit(int nr, const void *addr)
+{
+ u8 v;
+ const u32 *p = (const u32 *)addr;
+
+ asm("btl %2,%1; setc %0" : "=qm" (v) : "m" (*p), "Ir" (nr));
+ return v;
+}
+
+#define test_bit(nr,addr) \
+(__builtin_constant_p(nr) ? \
+ constant_test_bit((nr),(addr)) : \
+ variable_test_bit((nr),(addr)))
+
+static inline void set_bit(int nr, void *addr)
+{
+ asm("btsl %1,%0" : "+m" (*(u32 *)addr) : "Ir" (nr));
+}
+
+#endif /* BOOT_BITOPS_H */
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/boot.h
+ *
+ * Header file for the real-mode kernel code
+ */
+
+#ifndef BOOT_BOOT_H
+#define BOOT_BOOT_H
+
+#ifndef __ASSEMBLY__
+
+#include <stdarg.h>
+#include <linux/types.h>
+#include <linux/edd.h>
+#include <asm/boot.h>
+#include <asm/bootparam.h>
+
+/* Useful macros */
+#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
+
+extern struct setup_header hdr;
+extern struct boot_params boot_params;
+
+/* Basic port I/O */
+static inline void outb(u8 v, u16 port)
+{
+ asm volatile("outb %0,%1" : : "a" (v), "dN" (port));
+}
+static inline u8 inb(u16 port)
+{
+ u8 v;
+ asm volatile("inb %1,%0" : "=a" (v) : "dN" (port));
+ return v;
+}
+
+static inline void outw(u16 v, u16 port)
+{
+ asm volatile("outw %0,%1" : : "a" (v), "dN" (port));
+}
+static inline u16 inw(u16 port)
+{
+ u16 v;
+ asm volatile("inw %1,%0" : "=a" (v) : "dN" (port));
+ return v;
+}
+
+static inline void outl(u32 v, u16 port)
+{
+ asm volatile("outl %0,%1" : : "a" (v), "dn" (port));
+}
+static inline u32 inl(u32 port)
+{
+ u32 v;
+ asm volatile("inl %1,%0" : "=a" (v) : "dN" (port));
+ return v;
+}
+
+static inline void io_delay(void)
+{
+ const u16 DELAY_PORT = 0x80;
+ asm volatile("outb %%al,%0" : : "dN" (DELAY_PORT));
+}
+
+/* These functions are used to reference data in other segments. */
+
+static inline u16 ds(void)
+{
+ u16 seg;
+ asm("movw %%ds,%0" : "=rm" (seg));
+ return seg;
+}
+
+static inline void set_fs(u16 seg)
+{
+ asm volatile("movw %0,%%fs" : : "rm" (seg));
+}
+static inline u16 fs(void)
+{
+ u16 seg;
+ asm("movw %%fs,%0" : "=rm" (seg));
+ return seg;
+}
+
+static inline void set_gs(u16 seg)
+{
+ asm volatile("movw %0,%%gs" : : "rm" (seg));
+}
+static inline u16 gs(void)
+{
+ u16 seg;
+ asm("movw %%gs,%0" : "=rm" (seg));
+ return seg;
+}
+
+typedef unsigned int addr_t;
+
+static inline u8 rdfs8(addr_t addr)
+{
+ u8 v;
+ asm("movb %%fs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
+ return v;
+}
+static inline u16 rdfs16(addr_t addr)
+{
+ u16 v;
+ asm("movw %%fs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
+ return v;
+}
+static inline u32 rdfs32(addr_t addr)
+{
+ u32 v;
+ asm("movl %%fs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
+ return v;
+}
+
+static inline void wrfs8(u8 v, addr_t addr)
+{
+ asm volatile("movb %1,%%fs:%0" : "+m" (*(u8 *)addr) : "r" (v));
+}
+static inline void wrfs16(u16 v, addr_t addr)
+{
+ asm volatile("movw %1,%%fs:%0" : "+m" (*(u16 *)addr) : "r" (v));
+}
+static inline void wrfs32(u32 v, addr_t addr)
+{
+ asm volatile("movl %1,%%fs:%0" : "+m" (*(u32 *)addr) : "r" (v));
+}
+
+static inline u8 rdgs8(addr_t addr)
+{
+ u8 v;
+ asm("movb %%gs:%1,%0" : "=r" (v) : "m" (*(u8 *)addr));
+ return v;
+}
+static inline u16 rdgs16(addr_t addr)
+{
+ u16 v;
+ asm("movw %%gs:%1,%0" : "=r" (v) : "m" (*(u16 *)addr));
+ return v;
+}
+static inline u32 rdgs32(addr_t addr)
+{
+ u32 v;
+ asm("movl %%gs:%1,%0" : "=r" (v) : "m" (*(u32 *)addr));
+ return v;
+}
+
+static inline void wrgs8(u8 v, addr_t addr)
+{
+ asm volatile("movb %1,%%gs:%0" : "+m" (*(u8 *)addr) : "r" (v));
+}
+static inline void wrgs16(u16 v, addr_t addr)
+{
+ asm volatile("movw %1,%%gs:%0" : "+m" (*(u16 *)addr) : "r" (v));
+}
+static inline void wrgs32(u32 v, addr_t addr)
+{
+ asm volatile("movl %1,%%gs:%0" : "+m" (*(u32 *)addr) : "r" (v));
+}
+
+/* Note: these only return true/false, not a signed return value! */
+static inline int memcmp(const void *s1, const void *s2, size_t len)
+{
+ u8 diff;
+ asm("repe; cmpsb; setnz %0"
+ : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
+ return diff;
+}
+
+static inline int memcmp_fs(const void *s1, addr_t s2, size_t len)
+{
+ u8 diff;
+ asm("fs; repe; cmpsb; setnz %0"
+ : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
+ return diff;
+}
+static inline int memcmp_gs(const void *s1, addr_t s2, size_t len)
+{
+ u8 diff;
+ asm("gs; repe; cmpsb; setnz %0"
+ : "=qm" (diff), "+D" (s1), "+S" (s2), "+c" (len));
+ return diff;
+}
+
+static inline int isdigit(int ch)
+{
+ return (ch >= '0') && (ch <= '9');
+}
+
+/* Heap -- available for dynamic lists. */
+#define STACK_SIZE 512 /* Minimum number of bytes for stack */
+
+extern char _end[];
+extern char *HEAP;
+extern char *heap_end;
+#define RESET_HEAP() ((void *)( HEAP = _end ))
+static inline char *__get_heap(size_t s, size_t a, size_t n)
+{
+ char *tmp;
+
+ HEAP = (char *)(((size_t)HEAP+(a-1)) & ~(a-1));
+ tmp = HEAP;
+ HEAP += s*n;
+ return tmp;
+}
+#define GET_HEAP(type, n) \
+ ((type *)__get_heap(sizeof(type),__alignof__(type),(n)))
+
+static inline int heap_free(void)
+{
+ return heap_end-HEAP;
+}
+
+/* copy.S */
+
+void copy_to_fs(addr_t dst, void *src, size_t len);
+void *copy_from_fs(void *dst, addr_t src, size_t len);
+void copy_to_gs(addr_t dst, void *src, size_t len);
+void *copy_from_gs(void *dst, addr_t src, size_t len);
+void *memcpy(void *dst, void *src, size_t len);
+void *memset(void *dst, int c, size_t len);
+
+#define memcpy(d,s,l) __builtin_memcpy(d,s,l)
+#define memset(d,c,l) __builtin_memset(d,c,l)
+
+/* a20.c */
+int enable_a20(void);
+
+/* apm.c */
+int query_apm_bios(void);
+
+/* cmdline.c */
+int cmdline_find_option(const char *option, char *buffer, int bufsize);
+
+/* cpu.c, cpucheck.c */
+int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr);
+int validate_cpu(void);
+
+/* edd.c */
+void query_edd(void);
+
+/* header.S */
+void __attribute__((noreturn)) die(void);
+
+/* mca.c */
+int query_mca(void);
+
+/* memory.c */
+int detect_memory(void);
+
+/* pm.c */
+void __attribute__((noreturn)) go_to_protected_mode(void);
+
+/* pmjump.S */
+void __attribute__((noreturn))
+ protected_mode_jump(u32 entrypoint, u32 bootparams);
+
+/* printf.c */
+int sprintf(char *buf, const char *fmt, ...);
+int vsprintf(char *buf, const char *fmt, va_list args);
+int printf(const char *fmt, ...);
+
+/* string.c */
+int strcmp(const char *str1, const char *str2);
+size_t strnlen(const char *s, size_t maxlen);
+unsigned int atou(const char *s);
+
+/* tty.c */
+void puts(const char *);
+void putchar(int);
+int getchar(void);
+void kbd_flush(void);
+int getchar_timeout(void);
+
+/* video.c */
+void set_video(void);
+
+/* video-vesa.c */
+void vesa_store_edid(void);
+
+/* voyager.c */
+int query_voyager(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* BOOT_BOOT_H */
+++ /dev/null
-/*
- * bootsect.S Copyright (C) 1991, 1992 Linus Torvalds
- *
- * modified by Drew Eckhardt
- * modified by Bruce Evans (bde)
- * modified by Chris Noe (May 1999) (as86 -> gas)
- * gutted by H. Peter Anvin (Jan 2003)
- *
- * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment
- * addresses must be multiplied by 16 to obtain their respective linear
- * addresses. To avoid confusion, linear addresses are written using leading
- * hex while segment addresses are written as segment:offset.
- *
- */
-
-#include <asm/boot.h>
-
-SETUPSECTS = 4 /* default nr of setup-sectors */
-BOOTSEG = 0x07C0 /* original address of boot-sector */
-INITSEG = DEF_INITSEG /* we move boot here - out of the way */
-SETUPSEG = DEF_SETUPSEG /* setup starts here */
-SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */
-SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */
- /* to be loaded */
-ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */
-SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */
-
-#ifndef SVGA_MODE
-#define SVGA_MODE ASK_VGA
-#endif
-
-#ifndef RAMDISK
-#define RAMDISK 0
-#endif
-
-#ifndef ROOT_RDONLY
-#define ROOT_RDONLY 1
-#endif
-
-.code16
-.text
-
-.global _start
-_start:
-
- # Normalize the start address
- jmpl $BOOTSEG, $start2
-
-start2:
- movw %cs, %ax
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %ss
- movw $0x7c00, %sp
- sti
- cld
-
- movw $bugger_off_msg, %si
-
-msg_loop:
- lodsb
- andb %al, %al
- jz die
- movb $0xe, %ah
- movw $7, %bx
- int $0x10
- jmp msg_loop
-
-die:
- # Allow the user to press a key, then reboot
- xorw %ax, %ax
- int $0x16
- int $0x19
-
- # int 0x19 should never return. In case it does anyway,
- # invoke the BIOS reset code...
- ljmp $0xf000,$0xfff0
-
-
-bugger_off_msg:
- .ascii "Direct booting from floppy is no longer supported.\r\n"
- .ascii "Please use a boot loader program instead.\r\n"
- .ascii "\n"
- .ascii "Remove disk and press any key to reboot . . .\r\n"
- .byte 0
-
-
- # Kernel attributes; used by setup
-
- .org 497
-setup_sects: .byte SETUPSECTS
-root_flags: .word ROOT_RDONLY
-syssize: .word SYSSIZE
-swap_dev: .word SWAP_DEV
-ram_size: .word RAMDISK
-vid_mode: .word SVGA_MODE
-root_dev: .word ROOT_DEV
-boot_flag: .word 0xAA55
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/cmdline.c
+ *
+ * Simple command-line parser for early boot.
+ */
+
+#include "boot.h"
+
+static inline int myisspace(u8 c)
+{
+ return c <= ' '; /* Close enough approximation */
+}
+
+/*
+ * Find a non-boolean option, that is, "option=argument". In accordance
+ * with standard Linux practice, if this option is repeated, this returns
+ * the last instance on the command line.
+ *
+ * Returns the length of the argument (regardless of if it was
+ * truncated to fit in the buffer), or -1 on not found.
+ */
+int cmdline_find_option(const char *option, char *buffer, int bufsize)
+{
+ u32 cmdline_ptr = boot_params.hdr.cmd_line_ptr;
+ addr_t cptr;
+ char c;
+ int len = -1;
+ const char *opptr = NULL;
+ char *bufptr = buffer;
+ enum {
+ st_wordstart, /* Start of word/after whitespace */
+ st_wordcmp, /* Comparing this word */
+ st_wordskip, /* Miscompare, skip */
+ st_bufcpy /* Copying this to buffer */
+ } state = st_wordstart;
+
+ if (!cmdline_ptr || cmdline_ptr >= 0x100000)
+ return -1; /* No command line, or inaccessible */
+
+ cptr = cmdline_ptr & 0xf;
+ set_fs(cmdline_ptr >> 4);
+
+ while (cptr < 0x10000 && (c = rdfs8(cptr++))) {
+ switch (state) {
+ case st_wordstart:
+ if (myisspace(c))
+ break;
+
+ /* else */
+ state = st_wordcmp;
+ opptr = option;
+ /* fall through */
+
+ case st_wordcmp:
+ if (c == '=' && !*opptr) {
+ len = 0;
+ bufptr = buffer;
+ state = st_bufcpy;
+ } else if (myisspace(c)) {
+ state = st_wordstart;
+ } else if (c != *opptr++) {
+ state = st_wordskip;
+ }
+ break;
+
+ case st_wordskip:
+ if (myisspace(c))
+ state = st_wordstart;
+ break;
+
+ case st_bufcpy:
+ if (myisspace(c)) {
+ state = st_wordstart;
+ } else {
+ if (len < bufsize-1)
+ *bufptr++ = c;
+ len++;
+ }
+ break;
+ }
+ }
+
+ if (bufsize)
+ *bufptr = '\0';
+
+ return len;
+}
--- /dev/null
+/*
+ * code16gcc.h
+ *
+ * This file is -include'd when compiling 16-bit C code.
+ * Note: this asm() needs to be emitted before gcc omits any code.
+ * Depending on gcc version, this requires -fno-unit-at-a-time or
+ * -fno-toplevel-reorder.
+ *
+ * Hopefully gcc will eventually have a real -m16 option so we can
+ * drop this hack long term.
+ */
+
+#ifndef __ASSEMBLY__
+asm(".code16gcc");
+#endif
EXTRA_AFLAGS := -traditional
LDFLAGS_vmlinux := -T
-CFLAGS_misc.o += -fPIC
hostprogs-y := relocs
+CFLAGS := -m32 -D__KERNEL__ $(LINUX_INCLUDE) -O2 \
+ -fno-strict-aliasing -fPIC \
+ $(call cc-option,-ffreestanding) \
+ $(call cc-option,-fno-stack-protector)
+LDFLAGS := -m elf_i386
+
$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
- * data at 0x34-0x3f are used as the stack for this calculation.
- * Only 4 bytes are needed.
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
*/
- leal 0x40(%esi), %esp
+ leal (0x1e4+4)(%esi), %esp
call 1f
1: popl %ebp
subl $1b, %ebp
--- /dev/null
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/copy.S
+ *
+ * Memory copy routines
+ */
+
+ .code16gcc
+ .text
+
+ .globl memcpy
+ .type memcpy, @function
+memcpy:
+ pushw %si
+ pushw %di
+ movw %ax, %di
+ movw %dx, %si
+ pushw %cx
+ shrw $2, %cx
+ rep; movsl
+ popw %cx
+ andw $3, %cx
+ rep; movsb
+ popw %di
+ popw %si
+ ret
+ .size memcpy, .-memcpy
+
+ .globl memset
+ .type memset, @function
+memset:
+ pushw %di
+ movw %ax, %di
+ movzbl %dl, %eax
+ imull $0x01010101,%eax
+ pushw %cx
+ shrw $2, %cx
+ rep; stosl
+ popw %cx
+ andw $3, %cx
+ rep; stosb
+ popw %di
+ ret
+ .size memset, .-memset
+
+ .globl copy_from_fs
+ .type copy_from_fs, @function
+copy_from_fs:
+ pushw %ds
+ pushw %fs
+ popw %ds
+ call memcpy
+ popw %ds
+ ret
+ .size copy_from_fs, .-copy_from_fs
+
+ .globl copy_to_fs
+ .type copy_to_fs, @function
+copy_to_fs:
+ pushw %es
+ pushw %fs
+ popw %es
+ call memcpy
+ popw %es
+ ret
+ .size copy_to_fs, .-copy_to_fs
+
+#if 0 /* Not currently used, but can be enabled as needed */
+
+ .globl copy_from_gs
+ .type copy_from_gs, @function
+copy_from_gs:
+ pushw %ds
+ pushw %gs
+ popw %ds
+ call memcpy
+ popw %ds
+ ret
+ .size copy_from_gs, .-copy_from_gs
+ .globl copy_to_gs
+
+ .type copy_to_gs, @function
+copy_to_gs:
+ pushw %es
+ pushw %gs
+ popw %es
+ call memcpy
+ popw %es
+ ret
+ .size copy_to_gs, .-copy_to_gs
+
+#endif
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/cpu.c
+ *
+ * Check for obligatory CPU features and abort if the features are not
+ * present.
+ */
+
+#include "boot.h"
+#include "bitops.h"
+#include <asm/cpufeature.h>
+
+static char *cpu_name(int level)
+{
+ static char buf[6];
+
+ if (level == 64) {
+ return "x86-64";
+ } else {
+ sprintf(buf, "i%d86", level);
+ return buf;
+ }
+}
+
+int validate_cpu(void)
+{
+ u32 *err_flags;
+ int cpu_level, req_level;
+
+ check_cpu(&cpu_level, &req_level, &err_flags);
+
+ if (cpu_level < req_level) {
+ printf("This kernel requires an %s CPU, ",
+ cpu_name(req_level));
+ printf("but only detected an %s CPU.\n",
+ cpu_name(cpu_level));
+ return -1;
+ }
+
+ if (err_flags) {
+ int i, j;
+ puts("This kernel requires the following features "
+ "not present on the CPU:\n");
+
+ for (i = 0; i < NCAPINTS; i++) {
+ u32 e = err_flags[i];
+
+ for (j = 0; j < 32; j++) {
+ if (e & 1)
+ printf("%d:%d ", i, j);
+
+ e >>= 1;
+ }
+ }
+ putchar('\n');
+ return -1;
+ } else {
+ return 0;
+ }
+}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/cpucheck.c
+ *
+ * Check for obligatory CPU features and abort if the features are not
+ * present. This code should be compilable as 16-, 32- or 64-bit
+ * code, so be very careful with types and inline assembly.
+ *
+ * This code should not contain any messages; that requires an
+ * additional wrapper.
+ *
+ * As written, this code is not safe for inclusion into the kernel
+ * proper (after FPU initialization, in particular).
+ */
+
+#ifdef _SETUP
+# include "boot.h"
+# include "bitops.h"
+#endif
+#include <linux/types.h>
+#include <asm/cpufeature.h>
+#include <asm/processor-flags.h>
+#include <asm/required-features.h>
+#include <asm/msr-index.h>
+
+struct cpu_features {
+ int level; /* Family, or 64 for x86-64 */
+ int model;
+ u32 flags[NCAPINTS];
+};
+
+static struct cpu_features cpu;
+static u32 cpu_vendor[3];
+static u32 err_flags[NCAPINTS];
+
+#ifdef CONFIG_X86_64
+static const int req_level = 64;
+#elif defined(CONFIG_X86_MINIMUM_CPU_FAMILY)
+static const int req_level = CONFIG_X86_MINIMUM_CPU_FAMILY;
+#else
+static const int req_level = 3;
+#endif
+
+static const u32 req_flags[NCAPINTS] =
+{
+ REQUIRED_MASK0,
+ REQUIRED_MASK1,
+ REQUIRED_MASK2,
+ REQUIRED_MASK3,
+ REQUIRED_MASK4,
+ REQUIRED_MASK5,
+ REQUIRED_MASK6,
+ REQUIRED_MASK7,
+};
+
+#define A32(a,b,c,d) (((d) << 24)+((c) << 16)+((b) << 8)+(a))
+
+static int is_amd(void)
+{
+ return cpu_vendor[0] == A32('A','u','t','h') &&
+ cpu_vendor[1] == A32('e','n','t','i') &&
+ cpu_vendor[2] == A32('c','A','M','D');
+}
+
+static int is_centaur(void)
+{
+ return cpu_vendor[0] == A32('C','e','n','t') &&
+ cpu_vendor[1] == A32('a','u','r','H') &&
+ cpu_vendor[2] == A32('a','u','l','s');
+}
+
+static int is_transmeta(void)
+{
+ return cpu_vendor[0] == A32('G','e','n','u') &&
+ cpu_vendor[1] == A32('i','n','e','T') &&
+ cpu_vendor[2] == A32('M','x','8','6');
+}
+
+static int has_fpu(void)
+{
+ u16 fcw = -1, fsw = -1;
+ u32 cr0;
+
+ asm("movl %%cr0,%0" : "=r" (cr0));
+ if (cr0 & (X86_CR0_EM|X86_CR0_TS)) {
+ cr0 &= ~(X86_CR0_EM|X86_CR0_TS);
+ asm volatile("movl %0,%%cr0" : : "r" (cr0));
+ }
+
+ asm("fninit ; fnstsw %0 ; fnstcw %1" : "+m" (fsw), "+m" (fcw));
+
+ return fsw == 0 && (fcw & 0x103f) == 0x003f;
+}
+
+static int has_eflag(u32 mask)
+{
+ u32 f0, f1;
+
+ asm("pushfl ; "
+ "pushfl ; "
+ "popl %0 ; "
+ "movl %0,%1 ; "
+ "xorl %2,%1 ; "
+ "pushl %1 ; "
+ "popfl ; "
+ "pushfl ; "
+ "popl %1 ; "
+ "popfl"
+ : "=r" (f0), "=r" (f1)
+ : "g" (mask));
+
+ return !!((f0^f1) & mask);
+}
+
+static void get_flags(void)
+{
+ u32 max_intel_level, max_amd_level;
+ u32 tfms;
+
+ if (has_fpu())
+ set_bit(X86_FEATURE_FPU, cpu.flags);
+
+ if (has_eflag(X86_EFLAGS_ID)) {
+ asm("cpuid"
+ : "=a" (max_intel_level),
+ "=b" (cpu_vendor[0]),
+ "=d" (cpu_vendor[1]),
+ "=c" (cpu_vendor[2])
+ : "a" (0));
+
+ if (max_intel_level >= 0x00000001 &&
+ max_intel_level <= 0x0000ffff) {
+ asm("cpuid"
+ : "=a" (tfms),
+ "=c" (cpu.flags[4]),
+ "=d" (cpu.flags[0])
+ : "a" (0x00000001)
+ : "ebx");
+ cpu.level = (tfms >> 8) & 15;
+ cpu.model = (tfms >> 4) & 15;
+ if (cpu.level >= 6)
+ cpu.model += ((tfms >> 16) & 0xf) << 4;
+ }
+
+ asm("cpuid"
+ : "=a" (max_amd_level)
+ : "a" (0x80000000)
+ : "ebx", "ecx", "edx");
+
+ if (max_amd_level >= 0x80000001 &&
+ max_amd_level <= 0x8000ffff) {
+ u32 eax = 0x80000001;
+ asm("cpuid"
+ : "+a" (eax),
+ "=c" (cpu.flags[6]),
+ "=d" (cpu.flags[1])
+ : : "ebx");
+ }
+ }
+}
+
+/* Returns a bitmask of which words we have error bits in */
+static int check_flags(void)
+{
+ u32 err;
+ int i;
+
+ err = 0;
+ for (i = 0; i < NCAPINTS; i++) {
+ err_flags[i] = req_flags[i] & ~cpu.flags[i];
+ if (err_flags[i])
+ err |= 1 << i;
+ }
+
+ return err;
+}
+
+/*
+ * Returns -1 on error.
+ *
+ * *cpu_level is set to the current CPU level; *req_level to the required
+ * level. x86-64 is considered level 64 for this purpose.
+ *
+ * *err_flags_ptr is set to the flags error array if there are flags missing.
+ */
+int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr)
+{
+ int err;
+
+ memset(&cpu.flags, 0, sizeof cpu.flags);
+ cpu.level = 3;
+
+ if (has_eflag(X86_EFLAGS_AC))
+ cpu.level = 4;
+
+ get_flags();
+ err = check_flags();
+
+ if (test_bit(X86_FEATURE_LM, cpu.flags))
+ cpu.level = 64;
+
+ if (err == 0x01 &&
+ !(err_flags[0] &
+ ~((1 << X86_FEATURE_XMM)|(1 << X86_FEATURE_XMM2))) &&
+ is_amd()) {
+ /* If this is an AMD and we're only missing SSE+SSE2, try to
+ turn them on */
+
+ u32 ecx = MSR_K7_HWCR;
+ u32 eax, edx;
+
+ asm("rdmsr" : "=a" (eax), "=d" (edx) : "c" (ecx));
+ eax &= ~(1 << 15);
+ asm("wrmsr" : : "a" (eax), "d" (edx), "c" (ecx));
+
+ get_flags(); /* Make sure it really did something */
+ err = check_flags();
+ } else if (err == 0x01 &&
+ !(err_flags[0] & ~(1 << X86_FEATURE_CX8)) &&
+ is_centaur() && cpu.model >= 6) {
+ /* If this is a VIA C3, we might have to enable CX8
+ explicitly */
+
+ u32 ecx = MSR_VIA_FCR;
+ u32 eax, edx;
+
+ asm("rdmsr" : "=a" (eax), "=d" (edx) : "c" (ecx));
+ eax |= (1<<1)|(1<<7);
+ asm("wrmsr" : : "a" (eax), "d" (edx), "c" (ecx));
+
+ set_bit(X86_FEATURE_CX8, cpu.flags);
+ err = check_flags();
+ } else if (err == 0x01 && is_transmeta()) {
+ /* Transmeta might have masked feature bits in word 0 */
+
+ u32 ecx = 0x80860004;
+ u32 eax, edx;
+ u32 level = 1;
+
+ asm("rdmsr" : "=a" (eax), "=d" (edx) : "c" (ecx));
+ asm("wrmsr" : : "a" (~0), "d" (edx), "c" (ecx));
+ asm("cpuid"
+ : "+a" (level), "=d" (cpu.flags[0])
+ : : "ecx", "ebx");
+ asm("wrmsr" : : "a" (eax), "d" (edx), "c" (ecx));
+
+ err = check_flags();
+ }
+
+ if (err_flags_ptr)
+ *err_flags_ptr = err ? err_flags : NULL;
+ if (cpu_level_ptr)
+ *cpu_level_ptr = cpu.level;
+ if (req_level_ptr)
+ *req_level_ptr = req_level;
+
+ return (cpu.level < req_level || err) ? -1 : 0;
+}
+++ /dev/null
-/*
- * BIOS Enhanced Disk Drive support
- * Copyright (C) 2002, 2003, 2004 Dell, Inc.
- * by Matt Domsch <Matt_Domsch@dell.com> October 2002
- * conformant to T13 Committee www.t13.org
- * projects 1572D, 1484D, 1386D, 1226DT
- * disk signature read by Matt Domsch <Matt_Domsch@dell.com>
- * and Andrew Wilks <Andrew_Wilks@dell.com> September 2003, June 2004
- * legacy CHS retrieval by Patrick J. LoPresti <patl@users.sourceforge.net>
- * March 2004
- * Command line option parsing, Matt Domsch, November 2004
- */
-
-#include <linux/edd.h>
-#include <asm/setup.h>
-
-#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
-
-# It is assumed that %ds == INITSEG here
-
- movb $0, (EDD_MBR_SIG_NR_BUF)
- movb $0, (EDDNR)
-
-# Check the command line for options:
-# edd=of disables EDD completely (edd=off)
-# edd=sk skips the MBR test (edd=skipmbr)
-# edd=on re-enables EDD (edd=on)
-
- pushl %esi
- movw $edd_mbr_sig_start, %di # Default to edd=on
-
- movl %cs:(cmd_line_ptr), %esi
- andl %esi, %esi
- jz old_cl # Old boot protocol?
-
-# Convert to a real-mode pointer in fs:si
- movl %esi, %eax
- shrl $4, %eax
- movw %ax, %fs
- andw $0xf, %si
- jmp have_cl_pointer
-
-# Old-style boot protocol?
-old_cl:
- push %ds # aka INITSEG
- pop %fs
-
- cmpw $0xa33f, (0x20)
- jne done_cl # No command line at all?
- movw (0x22), %si # Pointer relative to INITSEG
-
-# fs:si has the pointer to the command line now
-have_cl_pointer:
-
-# Loop through kernel command line one byte at a time. Just in
-# case the loader is buggy and failed to null-terminate the command line
-# terminate if we get close enough to the end of the segment that we
-# cannot fit "edd=XX"...
-cl_atspace:
- cmpw $-5, %si # Watch for segment wraparound
- jae done_cl
- movl %fs:(%si), %eax
- andb %al, %al # End of line?
- jz done_cl
- cmpl $EDD_CL_EQUALS, %eax
- jz found_edd_equals
- cmpb $0x20, %al # <= space consider whitespace
- ja cl_skipword
- incw %si
- jmp cl_atspace
-
-cl_skipword:
- cmpw $-5, %si # Watch for segment wraparound
- jae done_cl
- movb %fs:(%si), %al # End of string?
- andb %al, %al
- jz done_cl
- cmpb $0x20, %al
- jbe cl_atspace
- incw %si
- jmp cl_skipword
-
-found_edd_equals:
-# only looking at first two characters after equals
-# late overrides early on the command line, so keep going after finding something
- movw %fs:4(%si), %ax
- cmpw $EDD_CL_OFF, %ax # edd=of
- je do_edd_off
- cmpw $EDD_CL_SKIP, %ax # edd=sk
- je do_edd_skipmbr
- cmpw $EDD_CL_ON, %ax # edd=on
- je do_edd_on
- jmp cl_skipword
-do_edd_skipmbr:
- movw $edd_start, %di
- jmp cl_skipword
-do_edd_off:
- movw $edd_done, %di
- jmp cl_skipword
-do_edd_on:
- movw $edd_mbr_sig_start, %di
- jmp cl_skipword
-
-done_cl:
- popl %esi
- jmpw *%di
-
-# Read the first sector of each BIOS disk device and store the 4-byte signature
-edd_mbr_sig_start:
- movb $0x80, %dl # from device 80
- movw $EDD_MBR_SIG_BUF, %bx # store buffer ptr in bx
-edd_mbr_sig_read:
- movl $0xFFFFFFFF, %eax
- movl %eax, (%bx) # assume failure
- pushw %bx
- movb $READ_SECTORS, %ah
- movb $1, %al # read 1 sector
- movb $0, %dh # at head 0
- movw $1, %cx # cylinder 0, sector 0
- pushw %es
- pushw %ds
- popw %es
- movw $EDDBUF, %bx # disk's data goes into EDDBUF
- pushw %dx # work around buggy BIOSes
- stc # work around buggy BIOSes
- int $0x13
- sti # work around buggy BIOSes
- popw %dx
- popw %es
- popw %bx
- jc edd_mbr_sig_done # on failure, we're done.
- cmpb $0, %ah # some BIOSes do not set CF
- jne edd_mbr_sig_done # on failure, we're done.
- movl (EDDBUF+EDD_MBR_SIG_OFFSET), %eax # read sig out of the MBR
- movl %eax, (%bx) # store success
- incb (EDD_MBR_SIG_NR_BUF) # note that we stored something
- incb %dl # increment to next device
- addw $4, %bx # increment sig buffer ptr
- cmpb $EDD_MBR_SIG_MAX, (EDD_MBR_SIG_NR_BUF) # Out of space?
- jb edd_mbr_sig_read # keep looping
-edd_mbr_sig_done:
-
-# Do the BIOS Enhanced Disk Drive calls
-# This consists of two calls:
-# int 13h ah=41h "Check Extensions Present"
-# int 13h ah=48h "Get Device Parameters"
-# int 13h ah=08h "Legacy Get Device Parameters"
-#
-# A buffer of size EDDMAXNR*(EDDEXTSIZE+EDDPARMSIZE) is reserved for our use
-# in the boot_params at EDDBUF. The first four bytes of which are
-# used to store the device number, interface support map and version
-# results from fn41. The next four bytes are used to store the legacy
-# cylinders, heads, and sectors from fn08. The following 74 bytes are used to
-# store the results from fn48. Starting from device 80h, fn41, then fn48
-# are called and their results stored in EDDBUF+n*(EDDEXTSIZE+EDDPARMIZE).
-# Then the pointer is incremented to store the data for the next call.
-# This repeats until either a device doesn't exist, or until EDDMAXNR
-# devices have been stored.
-# The one tricky part is that ds:si always points EDDEXTSIZE bytes into
-# the structure, and the fn41 and fn08 results are stored at offsets
-# from there. This removes the need to increment the pointer for
-# every store, and leaves it ready for the fn48 call.
-# A second one-byte buffer, EDDNR, in the boot_params stores
-# the number of BIOS devices which exist, up to EDDMAXNR.
-# In setup.c, copy_edd() stores both boot_params buffers away
-# for later use, as they would get overwritten otherwise.
-# This code is sensitive to the size of the structs in edd.h
-edd_start:
- # %ds points to the bootsector
- # result buffer for fn48
- movw $EDDBUF+EDDEXTSIZE, %si # in ds:si, fn41 results
- # kept just before that
- movb $0x80, %dl # BIOS device 0x80
-
-edd_check_ext:
- movb $CHECKEXTENSIONSPRESENT, %ah # Function 41
- movw $EDDMAGIC1, %bx # magic
- int $0x13 # make the call
- jc edd_done # no more BIOS devices
-
- cmpw $EDDMAGIC2, %bx # is magic right?
- jne edd_next # nope, next...
-
- movb %dl, %ds:-8(%si) # store device number
- movb %ah, %ds:-7(%si) # store version
- movw %cx, %ds:-6(%si) # store extensions
- incb (EDDNR) # note that we stored something
-
-edd_get_device_params:
- movw $EDDPARMSIZE, %ds:(%si) # put size
- movw $0x0, %ds:2(%si) # work around buggy BIOSes
- movb $GETDEVICEPARAMETERS, %ah # Function 48
- int $0x13 # make the call
- # Don't check for fail return
- # it doesn't matter.
-edd_get_legacy_chs:
- xorw %ax, %ax
- movw %ax, %ds:-4(%si)
- movw %ax, %ds:-2(%si)
- # Ralf Brown's Interrupt List says to set ES:DI to
- # 0000h:0000h "to guard against BIOS bugs"
- pushw %es
- movw %ax, %es
- movw %ax, %di
- pushw %dx # legacy call clobbers %dl
- movb $LEGACYGETDEVICEPARAMETERS, %ah # Function 08
- int $0x13 # make the call
- jc edd_legacy_done # failed
- movb %cl, %al # Low 6 bits are max
- andb $0x3F, %al # sector number
- movb %al, %ds:-1(%si) # Record max sect
- movb %dh, %ds:-2(%si) # Record max head number
- movb %ch, %al # Low 8 bits of max cyl
- shr $6, %cl
- movb %cl, %ah # High 2 bits of max cyl
- movw %ax, %ds:-4(%si)
-
-edd_legacy_done:
- popw %dx
- popw %es
- movw %si, %ax # increment si
- addw $EDDPARMSIZE+EDDEXTSIZE, %ax
- movw %ax, %si
-
-edd_next:
- incb %dl # increment to next device
- cmpb $EDDMAXNR, (EDDNR) # Out of space?
- jb edd_check_ext # keep looping
-
-edd_done:
-#endif
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/edd.c
+ *
+ * Get EDD BIOS disk information
+ */
+
+#include "boot.h"
+#include <linux/edd.h>
+
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+
+struct edd_dapa {
+ u8 pkt_size;
+ u8 rsvd;
+ u16 sector_cnt;
+ u16 buf_off, buf_seg;
+ u64 lba;
+ u64 buf_lin_addr;
+};
+
+/*
+ * Read the MBR (first sector) from a specific device.
+ */
+static int read_mbr(u8 devno, void *buf)
+{
+ struct edd_dapa dapa;
+ u16 ax, bx, cx, dx, si;
+
+ memset(&dapa, 0, sizeof dapa);
+ dapa.pkt_size = sizeof(dapa);
+ dapa.sector_cnt = 1;
+ dapa.buf_off = (size_t)buf;
+ dapa.buf_seg = ds();
+ /* dapa.lba = 0; */
+
+ ax = 0x4200; /* Extended Read */
+ si = (size_t)&dapa;
+ dx = devno;
+ asm("pushfl; stc; int $0x13; setc %%al; popfl"
+ : "+a" (ax), "+S" (si), "+d" (dx)
+ : "m" (dapa)
+ : "ebx", "ecx", "edi", "memory");
+
+ if (!(u8)ax)
+ return 0; /* OK */
+
+ ax = 0x0201; /* Legacy Read, one sector */
+ cx = 0x0001; /* Sector 0-0-1 */
+ dx = devno;
+ bx = (size_t)buf;
+ asm("pushfl; stc; int $0x13; setc %%al; popfl"
+ : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx)
+ : : "esi", "edi", "memory");
+
+ return -(u8)ax; /* 0 or -1 */
+}
+
+static u32 read_mbr_sig(u8 devno, struct edd_info *ei)
+{
+ int sector_size;
+ char *mbrbuf_ptr, *mbrbuf_end;
+ u32 mbrsig;
+ u32 buf_base, mbr_base;
+ extern char _end[];
+ static char mbr_buf[1024];
+
+ sector_size = ei->params.bytes_per_sector;
+ if (!sector_size)
+ sector_size = 512; /* Best available guess */
+
+ buf_base = (ds() << 4) + (u32)&_end;
+ mbr_base = (buf_base+sector_size-1) & ~(sector_size-1);
+ mbrbuf_ptr = mbr_buf + (mbr_base-buf_base);
+ mbrbuf_end = mbrbuf_ptr + sector_size;
+
+ if (!(boot_params.hdr.loadflags & CAN_USE_HEAP))
+ return 0;
+ if (mbrbuf_end > (char *)(size_t)boot_params.hdr.heap_end_ptr)
+ return 0;
+
+ if (read_mbr(devno, mbrbuf_ptr))
+ return 0;
+
+ mbrsig = *(u32 *)&mbrbuf_ptr[EDD_MBR_SIG_OFFSET];
+ return mbrsig;
+}
+
+static int get_edd_info(u8 devno, struct edd_info *ei)
+{
+ u16 ax, bx, cx, dx, di;
+
+ memset(ei, 0, sizeof *ei);
+
+ /* Check Extensions Present */
+
+ ax = 0x4100;
+ bx = EDDMAGIC1;
+ dx = devno;
+ asm("pushfl; stc; int $0x13; setc %%al; popfl"
+ : "+a" (ax), "+b" (bx), "=c" (cx), "+d" (dx)
+ : : "esi", "edi");
+
+ if ((u8)ax)
+ return -1; /* No extended information */
+
+ if (bx != EDDMAGIC2)
+ return -1;
+
+ ei->device = devno;
+ ei->version = ax >> 8; /* EDD version number */
+ ei->interface_support = cx; /* EDD functionality subsets */
+
+ /* Extended Get Device Parameters */
+
+ ei->params.length = sizeof(ei->params);
+ ax = 0x4800;
+ dx = devno;
+ asm("pushfl; int $0x13; popfl"
+ : "+a" (ax), "+d" (dx)
+ : "S" (&ei->params)
+ : "ebx", "ecx", "edi");
+
+ /* Get legacy CHS parameters */
+
+ /* Ralf Brown recommends setting ES:DI to 0:0 */
+ ax = 0x0800;
+ dx = devno;
+ di = 0;
+ asm("pushw %%es; "
+ "movw %%di,%%es; "
+ "pushfl; stc; int $0x13; setc %%al; popfl; "
+ "popw %%es"
+ : "+a" (ax), "=b" (bx), "=c" (cx), "+d" (dx), "+D" (di)
+ : : "esi");
+
+ if ((u8)ax == 0) {
+ ei->legacy_max_cylinder = (cx >> 8) + ((cx & 0xc0) << 2);
+ ei->legacy_max_head = dx >> 8;
+ ei->legacy_sectors_per_track = cx & 0x3f;
+ }
+
+ return 0;
+}
+
+void query_edd(void)
+{
+ char eddarg[8];
+ int do_mbr = 1;
+ int do_edd = 1;
+ int devno;
+ struct edd_info ei, *edp;
+
+ if (cmdline_find_option("edd", eddarg, sizeof eddarg) > 0) {
+ if (!strcmp(eddarg, "skipmbr") || !strcmp(eddarg, "skip"))
+ do_mbr = 0;
+ else if (!strcmp(eddarg, "off"))
+ do_edd = 0;
+ }
+
+ edp = (struct edd_info *)boot_params.eddbuf;
+
+ if (!do_edd)
+ return;
+
+ for (devno = 0x80; devno < 0x80+EDD_MBR_SIG_MAX; devno++) {
+ /*
+ * Scan the BIOS-supported hard disks and query EDD
+ * information...
+ */
+ get_edd_info(devno, &ei);
+
+ if (boot_params.eddbuf_entries < EDDMAXNR) {
+ memcpy(edp, &ei, sizeof ei);
+ edp++;
+ boot_params.eddbuf_entries++;
+ }
+
+ if (do_mbr) {
+ u32 mbr_sig;
+ mbr_sig = read_mbr_sig(devno, &ei);
+ boot_params.edd_mbr_sig_buffer[devno-0x80] = mbr_sig;
+ }
+ }
+}
+
+#endif
--- /dev/null
+/*
+ * header.S
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * Based on bootsect.S and setup.S
+ * modified by more people than can be counted
+ *
+ * Rewritten as a common file by H. Peter Anvin (Apr 2007)
+ *
+ * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment
+ * addresses must be multiplied by 16 to obtain their respective linear
+ * addresses. To avoid confusion, linear addresses are written using leading
+ * hex while segment addresses are written as segment:offset.
+ *
+ */
+
+#include <asm/segment.h>
+#include <linux/utsrelease.h>
+#include <asm/boot.h>
+#include <asm/e820.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include "boot.h"
+
+SETUPSECTS = 4 /* default nr of setup-sectors */
+BOOTSEG = 0x07C0 /* original address of boot-sector */
+SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */
+SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */
+ /* to be loaded */
+ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */
+SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */
+
+#ifndef SVGA_MODE
+#define SVGA_MODE ASK_VGA
+#endif
+
+#ifndef RAMDISK
+#define RAMDISK 0
+#endif
+
+#ifndef ROOT_RDONLY
+#define ROOT_RDONLY 1
+#endif
+
+ .code16
+ .section ".bstext", "ax"
+
+ .global bootsect_start
+bootsect_start:
+
+ # Normalize the start address
+ ljmp $BOOTSEG, $start2
+
+start2:
+ movw %cs, %ax
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %ss
+ xorw %sp, %sp
+ sti
+ cld
+
+ movw $bugger_off_msg, %si
+
+msg_loop:
+ lodsb
+ andb %al, %al
+ jz bs_die
+ movb $0xe, %ah
+ movw $7, %bx
+ int $0x10
+ jmp msg_loop
+
+bs_die:
+ # Allow the user to press a key, then reboot
+ xorw %ax, %ax
+ int $0x16
+ int $0x19
+
+ # int 0x19 should never return. In case it does anyway,
+ # invoke the BIOS reset code...
+ ljmp $0xf000,$0xfff0
+
+ .section ".bsdata", "a"
+bugger_off_msg:
+ .ascii "Direct booting from floppy is no longer supported.\r\n"
+ .ascii "Please use a boot loader program instead.\r\n"
+ .ascii "\n"
+ .ascii "Remove disk and press any key to reboot . . .\r\n"
+ .byte 0
+
+
+ # Kernel attributes; used by setup. This is part 1 of the
+ # header, from the old boot sector.
+
+ .section ".header", "a"
+ .globl hdr
+hdr:
+setup_sects: .byte SETUPSECTS
+root_flags: .word ROOT_RDONLY
+syssize: .long SYSSIZE
+ram_size: .word RAMDISK
+vid_mode: .word SVGA_MODE
+root_dev: .word ROOT_DEV
+boot_flag: .word 0xAA55
+
+ # offset 512, entry point
+
+ .globl _start
+_start:
+ # Explicitly enter this as bytes, or the assembler
+ # tries to generate a 3-byte jump here, which causes
+ # everything else to push off to the wrong offset.
+ .byte 0xeb # short (2-byte) jump
+ .byte start_of_setup-1f
+1:
+
+ # Part 2 of the header, from the old setup.S
+
+ .ascii "HdrS" # header signature
+ .word 0x0206 # header version number (>= 0x0105)
+ # or else old loadlin-1.5 will fail)
+ .globl realmode_swtch
+realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
+start_sys_seg: .word SYSSEG
+ .word kernel_version-512 # pointing to kernel version string
+ # above section of header is compatible
+ # with loadlin-1.5 (header v1.5). Don't
+ # change it.
+
+type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
+ # Bootlin, SYSLX, bootsect...)
+ # See Documentation/i386/boot.txt for
+ # assigned ids
+
+# flags, unused bits must be zero (RFU) bit within loadflags
+loadflags:
+LOADED_HIGH = 1 # If set, the kernel is loaded high
+CAN_USE_HEAP = 0x80 # If set, the loader also has set
+ # heap_end_ptr to tell how much
+ # space behind setup.S can be used for
+ # heap purposes.
+ # Only the loader knows what is free
+#ifndef __BIG_KERNEL__
+ .byte 0
+#else
+ .byte LOADED_HIGH
+#endif
+
+setup_move_size: .word 0x8000 # size to move, when setup is not
+ # loaded at 0x90000. We will move setup
+ # to 0x90000 then just before jumping
+ # into the kernel. However, only the
+ # loader knows how much data behind
+ # us also needs to be loaded.
+
+code32_start: # here loaders can put a different
+ # start address for 32-bit code.
+#ifndef __BIG_KERNEL__
+ .long 0x1000 # 0x1000 = default for zImage
+#else
+ .long 0x100000 # 0x100000 = default for big kernel
+#endif
+
+ramdisk_image: .long 0 # address of loaded ramdisk image
+ # Here the loader puts the 32-bit
+ # address where it loaded the image.
+ # This only will be read by the kernel.
+
+ramdisk_size: .long 0 # its size in bytes
+
+bootsect_kludge:
+ .long 0 # obsolete
+
+heap_end_ptr: .word _end+1024 # (Header version 0x0201 or later)
+ # space from here (exclusive) down to
+ # end of setup code can be used by setup
+ # for local heap purposes.
+
+pad1: .word 0
+cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
+ # If nonzero, a 32-bit pointer
+ # to the kernel command line.
+ # The command line should be
+ # located between the start of
+ # setup and the end of low
+ # memory (0xa0000), or it may
+ # get overwritten before it
+ # gets read. If this field is
+ # used, there is no longer
+ # anything magical about the
+ # 0x90000 segment; the setup
+ # can be located anywhere in
+ # low memory 0x10000 or higher.
+
+ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
+ # (Header version 0x0203 or later)
+ # The highest safe address for
+ # the contents of an initrd
+
+kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment
+ #required for protected mode
+ #kernel
+#ifdef CONFIG_RELOCATABLE
+relocatable_kernel: .byte 1
+#else
+relocatable_kernel: .byte 0
+#endif
+pad2: .byte 0
+pad3: .word 0
+
+cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
+ #added with boot protocol
+ #version 2.06
+
+# End of setup header #####################################################
+
+ .section ".inittext", "ax"
+start_of_setup:
+#ifdef SAFE_RESET_DISK_CONTROLLER
+# Reset the disk controller.
+ movw $0x0000, %ax # Reset disk controller
+ movb $0x80, %dl # All disks
+ int $0x13
+#endif
+
+# We will have entired with %cs = %ds+0x20, normalize %cs so
+# it is on par with the other segments.
+ pushw %ds
+ pushw $setup2
+ lretw
+
+setup2:
+# Force %es = %ds
+ movw %ds, %ax
+ movw %ax, %es
+ cld
+
+# Stack paranoia: align the stack and make sure it is good
+# for both 16- and 32-bit references. In particular, if we
+# were meant to have been using the full 16-bit segment, the
+# caller might have set %sp to zero, which breaks %esp-based
+# references.
+ andw $~3, %sp # dword align (might as well...)
+ jnz 1f
+ movw $0xfffc, %sp # Make sure we're not zero
+1: movzwl %sp, %esp # Clear upper half of %esp
+ sti
+
+# Check signature at end of setup
+ cmpl $0x5a5aaa55, setup_sig
+ jne setup_bad
+
+# Zero the bss
+ movw $__bss_start, %di
+ movw $_end+3, %cx
+ xorl %eax, %eax
+ subw %di, %cx
+ shrw $2, %cx
+ rep; stosl
+
+# Jump to C code (should not return)
+ calll main
+
+# Setup corrupt somehow...
+setup_bad:
+ movl $setup_corrupt, %eax
+ calll puts
+ # Fall through...
+
+ .globl die
+ .type die, @function
+die:
+ hlt
+ jmp die
+
+ .size die, .-due
+
+ .section ".initdata", "a"
+setup_corrupt:
+ .byte 7
+ .string "No setup signature found..."
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/main.c
+ *
+ * Main module for the real-mode kernel code
+ */
+
+#include "boot.h"
+
+struct boot_params boot_params __attribute__((aligned(16)));
+
+char *HEAP = _end;
+char *heap_end = _end; /* Default end of heap = no heap */
+
+/*
+ * Copy the header into the boot parameter block. Since this
+ * screws up the old-style command line protocol, adjust by
+ * filling in the new-style command line pointer instead.
+ */
+#define OLD_CL_MAGIC 0xA33F
+#define OLD_CL_ADDRESS 0x20
+
+static void copy_boot_params(void)
+{
+ struct old_cmdline {
+ u16 cl_magic;
+ u16 cl_offset;
+ };
+ const struct old_cmdline * const oldcmd =
+ (const struct old_cmdline *)OLD_CL_ADDRESS;
+
+ BUILD_BUG_ON(sizeof boot_params != 4096);
+ memcpy(&boot_params.hdr, &hdr, sizeof hdr);
+
+ if (!boot_params.hdr.cmd_line_ptr &&
+ oldcmd->cl_magic == OLD_CL_MAGIC) {
+ /* Old-style command line protocol. */
+ u16 cmdline_seg;
+
+ /* Figure out if the command line falls in the region
+ of memory that an old kernel would have copied up
+ to 0x90000... */
+ if (oldcmd->cl_offset < boot_params.hdr.setup_move_size)
+ cmdline_seg = ds();
+ else
+ cmdline_seg = 0x9000;
+
+ boot_params.hdr.cmd_line_ptr =
+ (cmdline_seg << 4) + oldcmd->cl_offset;
+ }
+}
+
+/*
+ * Set the keyboard repeat rate to maximum. Unclear why this
+ * is done here; this might be possible to kill off as stale code.
+ */
+static void keyboard_set_repeat(void)
+{
+ u16 ax = 0x0305;
+ u16 bx = 0;
+ asm volatile("int $0x16"
+ : "+a" (ax), "+b" (bx)
+ : : "ecx", "edx", "esi", "edi");
+}
+
+/*
+ * Get Intel SpeedStep IST information.
+ */
+static void query_speedstep_ist(void)
+{
+ asm("int $0x15"
+ : "=a" (boot_params.speedstep_info[0]),
+ "=b" (boot_params.speedstep_info[1]),
+ "=c" (boot_params.speedstep_info[2]),
+ "=d" (boot_params.speedstep_info[3])
+ : "a" (0x0000e980), /* IST Support */
+ "d" (0x47534943)); /* Request value */
+}
+
+/*
+ * Tell the BIOS what CPU mode we intend to run in.
+ */
+static void set_bios_mode(void)
+{
+#ifdef CONFIG_X86_64
+ u32 eax, ebx;
+
+ eax = 0xec00;
+ ebx = 2;
+ asm volatile("int $0x15"
+ : "+a" (eax), "+b" (ebx)
+ : : "ecx", "edx", "esi", "edi");
+#endif
+}
+
+void main(void)
+{
+ /* First, copy the boot header into the "zeropage" */
+ copy_boot_params();
+
+ /* End of heap check */
+ if (boot_params.hdr.loadflags & CAN_USE_HEAP) {
+ heap_end = (char *)(boot_params.hdr.heap_end_ptr
+ +0x200-STACK_SIZE);
+ } else {
+ /* Boot protocol 2.00 only, no heap available */
+ puts("WARNING: Ancient bootloader, some functionality "
+ "may be limited!\n");
+ }
+
+ /* Make sure we have all the proper CPU support */
+ if (validate_cpu()) {
+ puts("Unable to boot - please use a kernel appropriate "
+ "for your CPU.\n");
+ die();
+ }
+
+ /* Tell the BIOS what CPU mode we intend to run in. */
+ set_bios_mode();
+
+ /* Detect memory layout */
+ detect_memory();
+
+ /* Set keyboard repeat rate (why?) */
+ keyboard_set_repeat();
+
+ /* Set the video mode */
+ set_video();
+
+ /* Query MCA information */
+ query_mca();
+
+ /* Voyager */
+#ifdef CONFIG_X86_VOYAGER
+ query_voyager();
+#endif
+
+ /* Query SpeedStep IST information */
+ query_speedstep_ist();
+
+ /* Query APM information */
+#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
+ query_apm_bios();
+#endif
+
+ /* Query EDD information */
+#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
+ query_edd();
+#endif
+ /* Do the last things and invoke protected mode */
+ go_to_protected_mode();
+}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/mca.c
+ *
+ * Get the MCA system description table
+ */
+
+#include "boot.h"
+
+int query_mca(void)
+{
+ u8 err;
+ u16 es, bx, len;
+
+ asm("pushw %%es ; "
+ "int $0x15 ; "
+ "setc %0 ; "
+ "movw %%es, %1 ; "
+ "popw %%es"
+ : "=acdSDm" (err), "=acdSDm" (es), "=b" (bx)
+ : "a" (0xc000));
+
+ if (err)
+ return -1; /* No MCA present */
+
+ set_fs(es);
+ len = rdfs16(bx);
+
+ if (len > sizeof(boot_params.sys_desc_table))
+ len = sizeof(boot_params.sys_desc_table);
+
+ copy_from_fs(&boot_params.sys_desc_table, bx, len);
+ return 0;
+}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/memory.c
+ *
+ * Memory detection code
+ */
+
+#include "boot.h"
+
+#define SMAP 0x534d4150 /* ASCII "SMAP" */
+
+static int detect_memory_e820(void)
+{
+ u32 next = 0;
+ u32 size, id;
+ u8 err;
+ struct e820entry *desc = boot_params.e820_map;
+
+ do {
+ size = sizeof(struct e820entry);
+ id = SMAP;
+ asm("int $0x15; setc %0"
+ : "=am" (err), "+b" (next), "+d" (id), "+c" (size),
+ "=m" (*desc)
+ : "D" (desc), "a" (0xe820));
+
+ if (err || id != SMAP)
+ break;
+
+ boot_params.e820_entries++;
+ desc++;
+ } while (next && boot_params.e820_entries < E820MAX);
+
+ return boot_params.e820_entries;
+}
+
+static int detect_memory_e801(void)
+{
+ u16 ax, bx, cx, dx;
+ u8 err;
+
+ bx = cx = dx = 0;
+ ax = 0xe801;
+ asm("stc; int $0x15; setc %0"
+ : "=m" (err), "+a" (ax), "+b" (bx), "+c" (cx), "+d" (dx));
+
+ if (err)
+ return -1;
+
+ /* Do we really need to do this? */
+ if (cx || dx) {
+ ax = cx;
+ bx = dx;
+ }
+
+ if (ax > 15*1024)
+ return -1; /* Bogus! */
+
+ /* This ignores memory above 16MB if we have a memory hole
+ there. If someone actually finds a machine with a memory
+ hole at 16MB and no support for 0E820h they should probably
+ generate a fake e820 map. */
+ boot_params.alt_mem_k = (ax == 15*1024) ? (dx << 6)+ax : ax;
+
+ return 0;
+}
+
+static int detect_memory_88(void)
+{
+ u16 ax;
+ u8 err;
+
+ ax = 0x8800;
+ asm("stc; int $0x15; setc %0" : "=bcdm" (err), "+a" (ax));
+
+ boot_params.screen_info.ext_mem_k = ax;
+
+ return -err;
+}
+
+int detect_memory(void)
+{
+ if (detect_memory_e820() > 0)
+ return 0;
+
+ if (!detect_memory_e801())
+ return 0;
+
+ return detect_memory_88();
+}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/pm.c
+ *
+ * Prepare the machine for transition to protected mode.
+ */
+
+#include "boot.h"
+#include <asm/segment.h>
+
+/*
+ * Invoke the realmode switch hook if present; otherwise
+ * disable all interrupts.
+ */
+static void realmode_switch_hook(void)
+{
+ if (boot_params.hdr.realmode_swtch) {
+ asm volatile("lcallw *%0"
+ : : "m" (boot_params.hdr.realmode_swtch)
+ : "eax", "ebx", "ecx", "edx");
+ } else {
+ asm volatile("cli");
+ outb(0x80, 0x70); /* Disable NMI */
+ io_delay();
+ }
+}
+
+/*
+ * A zImage kernel is loaded at 0x10000 but wants to run at 0x1000.
+ * A bzImage kernel is loaded and runs at 0x100000.
+ */
+static void move_kernel_around(void)
+{
+ /* Note: rely on the compile-time option here rather than
+ the LOADED_HIGH flag. The Qemu kernel loader unconditionally
+ sets the loadflags to zero. */
+#ifndef __BIG_KERNEL__
+ u16 dst_seg, src_seg;
+ u32 syssize;
+
+ dst_seg = 0x1000 >> 4;
+ src_seg = 0x10000 >> 4;
+ syssize = boot_params.hdr.syssize; /* Size in 16-byte paragraphs */
+
+ while (syssize) {
+ int paras = (syssize >= 0x1000) ? 0x1000 : syssize;
+ int dwords = paras << 2;
+
+ asm volatile("pushw %%es ; "
+ "pushw %%ds ; "
+ "movw %1,%%es ; "
+ "movw %2,%%ds ; "
+ "xorw %%di,%%di ; "
+ "xorw %%si,%%si ; "
+ "rep;movsl ; "
+ "popw %%ds ; "
+ "popw %%es"
+ : "+c" (dwords)
+ : "rm" (dst_seg), "rm" (src_seg)
+ : "esi", "edi");
+
+ syssize -= paras;
+ dst_seg += paras;
+ src_seg += paras;
+ }
+#endif
+}
+
+/*
+ * Disable all interrupts at the legacy PIC.
+ */
+static void mask_all_interrupts(void)
+{
+ outb(0xff, 0xa1); /* Mask all interrupts on the seconday PIC */
+ io_delay();
+ outb(0xfb, 0x21); /* Mask all but cascade on the primary PIC */
+ io_delay();
+}
+
+/*
+ * Reset IGNNE# if asserted in the FPU.
+ */
+static void reset_coprocessor(void)
+{
+ outb(0, 0xf0);
+ io_delay();
+ outb(0, 0xf1);
+ io_delay();
+}
+
+/*
+ * Set up the GDT
+ */
+#define GDT_ENTRY(flags,base,limit) \
+ (((u64)(base & 0xff000000) << 32) | \
+ ((u64)flags << 40) | \
+ ((u64)(limit & 0x00ff0000) << 32) | \
+ ((u64)(base & 0x00ffff00) << 16) | \
+ ((u64)(limit & 0x0000ffff)))
+
+struct gdt_ptr {
+ u16 len;
+ u32 ptr;
+} __attribute__((packed));
+
+static void setup_gdt(void)
+{
+ /* There are machines which are known to not boot with the GDT
+ being 8-byte unaligned. Intel recommends 16 byte alignment. */
+ static const u64 boot_gdt[] __attribute__((aligned(16))) = {
+ /* CS: code, read/execute, 4 GB, base 0 */
+ [GDT_ENTRY_BOOT_CS] = GDT_ENTRY(0xc09b, 0, 0xfffff),
+ /* DS: data, read/write, 4 GB, base 0 */
+ [GDT_ENTRY_BOOT_DS] = GDT_ENTRY(0xc093, 0, 0xfffff),
+ };
+ struct gdt_ptr gdt;
+
+ gdt.len = sizeof(boot_gdt)-1;
+ gdt.ptr = (u32)&boot_gdt + (ds() << 4);
+
+ asm volatile("lgdtl %0" : : "m" (gdt));
+}
+
+/*
+ * Set up the IDT
+ */
+static void setup_idt(void)
+{
+ static const struct gdt_ptr null_idt = {0, 0};
+ asm volatile("lidtl %0" : : "m" (null_idt));
+}
+
+/*
+ * Actual invocation sequence
+ */
+void go_to_protected_mode(void)
+{
+ /* Hook before leaving real mode, also disables interrupts */
+ realmode_switch_hook();
+
+ /* Move the kernel/setup to their final resting places */
+ move_kernel_around();
+
+ /* Enable the A20 gate */
+ if (enable_a20()) {
+ puts("A20 gate not responding, unable to boot...\n");
+ die();
+ }
+
+ /* Reset coprocessor (IGNNE#) */
+ reset_coprocessor();
+
+ /* Mask all interrupts in the PIC */
+ mask_all_interrupts();
+
+ /* Actual transition to protected mode... */
+ setup_idt();
+ setup_gdt();
+ protected_mode_jump(boot_params.hdr.code32_start,
+ (u32)&boot_params + (ds() << 4));
+}
--- /dev/null
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/pmjump.S
+ *
+ * The actual transition into protected mode
+ */
+
+#include <asm/boot.h>
+#include <asm/segment.h>
+
+ .text
+
+ .globl protected_mode_jump
+ .type protected_mode_jump, @function
+
+ .code16
+
+/*
+ * void protected_mode_jump(u32 entrypoint, u32 bootparams);
+ */
+protected_mode_jump:
+ xorl %ebx, %ebx # Flag to indicate this is a boot
+ movl %edx, %esi # Pointer to boot_params table
+ movl %eax, 2f # Patch ljmpl instruction
+ jmp 1f # Short jump to flush instruction q.
+
+1:
+ movw $__BOOT_DS, %cx
+
+ movl %cr0, %edx
+ orb $1, %dl # Protected mode (PE) bit
+ movl %edx, %cr0
+
+ movw %cx, %ds
+ movw %cx, %es
+ movw %cx, %fs
+ movw %cx, %gs
+ movw %cx, %ss
+
+ # Jump to the 32-bit entrypoint
+ .byte 0x66, 0xea # ljmpl opcode
+2: .long 0 # offset
+ .word __BOOT_CS # segment
+
+ .size protected_mode_jump, .-protected_mode_jump
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/printf.c
+ *
+ * Oh, it's a waste of space, but oh-so-yummy for debugging. This
+ * version of printf() does not include 64-bit support. "Live with
+ * it."
+ *
+ */
+
+#include "boot.h"
+
+static int skip_atoi(const char **s)
+{
+ int i = 0;
+
+ while (isdigit(**s))
+ i = i * 10 + *((*s)++) - '0';
+ return i;
+}
+
+#define ZEROPAD 1 /* pad with zero */
+#define SIGN 2 /* unsigned/signed long */
+#define PLUS 4 /* show plus */
+#define SPACE 8 /* space if plus */
+#define LEFT 16 /* left justified */
+#define SPECIAL 32 /* 0x */
+#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */
+
+#define do_div(n,base) ({ \
+int __res; \
+__res = ((unsigned long) n) % (unsigned) base; \
+n = ((unsigned long) n) / (unsigned) base; \
+__res; })
+
+static char *number(char *str, long num, int base, int size, int precision,
+ int type)
+{
+ char c, sign, tmp[66];
+ const char *digits = "0123456789abcdefghijklmnopqrstuvwxyz";
+ int i;
+
+ if (type & LARGE)
+ digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
+ if (type & LEFT)
+ type &= ~ZEROPAD;
+ if (base < 2 || base > 36)
+ return 0;
+ c = (type & ZEROPAD) ? '0' : ' ';
+ sign = 0;
+ if (type & SIGN) {
+ if (num < 0) {
+ sign = '-';
+ num = -num;
+ size--;
+ } else if (type & PLUS) {
+ sign = '+';
+ size--;
+ } else if (type & SPACE) {
+ sign = ' ';
+ size--;
+ }
+ }
+ if (type & SPECIAL) {
+ if (base == 16)
+ size -= 2;
+ else if (base == 8)
+ size--;
+ }
+ i = 0;
+ if (num == 0)
+ tmp[i++] = '0';
+ else
+ while (num != 0)
+ tmp[i++] = digits[do_div(num, base)];
+ if (i > precision)
+ precision = i;
+ size -= precision;
+ if (!(type & (ZEROPAD + LEFT)))
+ while (size-- > 0)
+ *str++ = ' ';
+ if (sign)
+ *str++ = sign;
+ if (type & SPECIAL) {
+ if (base == 8)
+ *str++ = '0';
+ else if (base == 16) {
+ *str++ = '0';
+ *str++ = digits[33];
+ }
+ }
+ if (!(type & LEFT))
+ while (size-- > 0)
+ *str++ = c;
+ while (i < precision--)
+ *str++ = '0';
+ while (i-- > 0)
+ *str++ = tmp[i];
+ while (size-- > 0)
+ *str++ = ' ';
+ return str;
+}
+
+int vsprintf(char *buf, const char *fmt, va_list args)
+{
+ int len;
+ unsigned long num;
+ int i, base;
+ char *str;
+ const char *s;
+
+ int flags; /* flags to number() */
+
+ int field_width; /* width of output field */
+ int precision; /* min. # of digits for integers; max
+ number of chars for from string */
+ int qualifier; /* 'h', 'l', or 'L' for integer fields */
+
+ for (str = buf; *fmt; ++fmt) {
+ if (*fmt != '%') {
+ *str++ = *fmt;
+ continue;
+ }
+
+ /* process flags */
+ flags = 0;
+ repeat:
+ ++fmt; /* this also skips first '%' */
+ switch (*fmt) {
+ case '-':
+ flags |= LEFT;
+ goto repeat;
+ case '+':
+ flags |= PLUS;
+ goto repeat;
+ case ' ':
+ flags |= SPACE;
+ goto repeat;
+ case '#':
+ flags |= SPECIAL;
+ goto repeat;
+ case '0':
+ flags |= ZEROPAD;
+ goto repeat;
+ }
+
+ /* get field width */
+ field_width = -1;
+ if (isdigit(*fmt))
+ field_width = skip_atoi(&fmt);
+ else if (*fmt == '*') {
+ ++fmt;
+ /* it's the next argument */
+ field_width = va_arg(args, int);
+ if (field_width < 0) {
+ field_width = -field_width;
+ flags |= LEFT;
+ }
+ }
+
+ /* get the precision */
+ precision = -1;
+ if (*fmt == '.') {
+ ++fmt;
+ if (isdigit(*fmt))
+ precision = skip_atoi(&fmt);
+ else if (*fmt == '*') {
+ ++fmt;
+ /* it's the next argument */
+ precision = va_arg(args, int);
+ }
+ if (precision < 0)
+ precision = 0;
+ }
+
+ /* get the conversion qualifier */
+ qualifier = -1;
+ if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L') {
+ qualifier = *fmt;
+ ++fmt;
+ }
+
+ /* default base */
+ base = 10;
+
+ switch (*fmt) {
+ case 'c':
+ if (!(flags & LEFT))
+ while (--field_width > 0)
+ *str++ = ' ';
+ *str++ = (unsigned char)va_arg(args, int);
+ while (--field_width > 0)
+ *str++ = ' ';
+ continue;
+
+ case 's':
+ s = va_arg(args, char *);
+ len = strnlen(s, precision);
+
+ if (!(flags & LEFT))
+ while (len < field_width--)
+ *str++ = ' ';
+ for (i = 0; i < len; ++i)
+ *str++ = *s++;
+ while (len < field_width--)
+ *str++ = ' ';
+ continue;
+
+ case 'p':
+ if (field_width == -1) {
+ field_width = 2 * sizeof(void *);
+ flags |= ZEROPAD;
+ }
+ str = number(str,
+ (unsigned long)va_arg(args, void *), 16,
+ field_width, precision, flags);
+ continue;
+
+ case 'n':
+ if (qualifier == 'l') {
+ long *ip = va_arg(args, long *);
+ *ip = (str - buf);
+ } else {
+ int *ip = va_arg(args, int *);
+ *ip = (str - buf);
+ }
+ continue;
+
+ case '%':
+ *str++ = '%';
+ continue;
+
+ /* integer number formats - set up the flags and "break" */
+ case 'o':
+ base = 8;
+ break;
+
+ case 'X':
+ flags |= LARGE;
+ case 'x':
+ base = 16;
+ break;
+
+ case 'd':
+ case 'i':
+ flags |= SIGN;
+ case 'u':
+ break;
+
+ default:
+ *str++ = '%';
+ if (*fmt)
+ *str++ = *fmt;
+ else
+ --fmt;
+ continue;
+ }
+ if (qualifier == 'l')
+ num = va_arg(args, unsigned long);
+ else if (qualifier == 'h') {
+ num = (unsigned short)va_arg(args, int);
+ if (flags & SIGN)
+ num = (short)num;
+ } else if (flags & SIGN)
+ num = va_arg(args, int);
+ else
+ num = va_arg(args, unsigned int);
+ str = number(str, num, base, field_width, precision, flags);
+ }
+ *str = '\0';
+ return str - buf;
+}
+
+int sprintf(char *buf, const char *fmt, ...)
+{
+ va_list args;
+ int i;
+
+ va_start(args, fmt);
+ i = vsprintf(buf, fmt, args);
+ va_end(args);
+ return i;
+}
+
+int printf(const char *fmt, ...)
+{
+ char printf_buf[1024];
+ va_list args;
+ int printed;
+
+ va_start(args, fmt);
+ printed = vsprintf(printf_buf, fmt, args);
+ va_end(args);
+
+ puts(printf_buf);
+
+ return printed;
+}
+++ /dev/null
-/*
- * setup.S Copyright (C) 1991, 1992 Linus Torvalds
- *
- * setup.s is responsible for getting the system data from the BIOS,
- * and putting them into the appropriate places in system memory.
- * both setup.s and system has been loaded by the bootblock.
- *
- * This code asks the bios for memory/disk/other parameters, and
- * puts them in a "safe" place: 0x90000-0x901FF, ie where the
- * boot-block used to be. It is then up to the protected mode
- * system to read them from there before the area is overwritten
- * for buffer-blocks.
- *
- * Move PS/2 aux init code to psaux.c
- * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
- *
- * some changes and additional features by Christoph Niemann,
- * March 1993/June 1994 (Christoph.Niemann@linux.org)
- *
- * add APM BIOS checking by Stephen Rothwell, May 1994
- * (sfr@canb.auug.org.au)
- *
- * High load stuff, initrd support and position independency
- * by Hans Lermen & Werner Almesberger, February 1996
- * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
- *
- * Video handling moved to video.S by Martin Mares, March 1996
- * <mj@k332.feld.cvut.cz>
- *
- * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
- * parsons) to avoid loadlin confusion, July 1997
- *
- * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
- * <stiker@northlink.com>
- *
- * Fix to work around buggy BIOSes which don't use carry bit correctly
- * and/or report extended memory in CX/DX for e801h memory size detection
- * call. As a result the kernel got wrong figures. The int15/e801h docs
- * from Ralf Brown interrupt list seem to indicate AX/BX should be used
- * anyway. So to avoid breaking many machines (presumably there was a reason
- * to orginally use CX/DX instead of AX/BX), we do a kludge to see
- * if CX/DX have been changed in the e801 call and if so use AX/BX .
- * Michael Miller, April 2001 <michaelm@mjmm.org>
- *
- * New A20 code ported from SYSLINUX by H. Peter Anvin. AMD Elan bugfixes
- * by Robert Schwebel, December 2001 <robert@schwebel.de>
- */
-
-#include <asm/segment.h>
-#include <linux/utsrelease.h>
-#include <linux/compile.h>
-#include <asm/boot.h>
-#include <asm/e820.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-/* Signature words to ensure LILO loaded us right */
-#define SIG1 0xAA55
-#define SIG2 0x5A5A
-
-INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way
-SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536).
-SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment
- # ... and the former contents of CS
-
-DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020
-
-.code16
-.globl begtext, begdata, begbss, endtext, enddata, endbss
-
-.text
-begtext:
-.data
-begdata:
-.bss
-begbss:
-.text
-
-start:
- jmp trampoline
-
-# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
-
- .ascii "HdrS" # header signature
- .word 0x0206 # header version number (>= 0x0105)
- # or else old loadlin-1.5 will fail)
-realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
-start_sys_seg: .word SYSSEG
- .word kernel_version # pointing to kernel version string
- # above section of header is compatible
- # with loadlin-1.5 (header v1.5). Don't
- # change it.
-
-type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
- # Bootlin, SYSLX, bootsect...)
- # See Documentation/i386/boot.txt for
- # assigned ids
-
-# flags, unused bits must be zero (RFU) bit within loadflags
-loadflags:
-LOADED_HIGH = 1 # If set, the kernel is loaded high
-CAN_USE_HEAP = 0x80 # If set, the loader also has set
- # heap_end_ptr to tell how much
- # space behind setup.S can be used for
- # heap purposes.
- # Only the loader knows what is free
-#ifndef __BIG_KERNEL__
- .byte 0
-#else
- .byte LOADED_HIGH
-#endif
-
-setup_move_size: .word 0x8000 # size to move, when setup is not
- # loaded at 0x90000. We will move setup
- # to 0x90000 then just before jumping
- # into the kernel. However, only the
- # loader knows how much data behind
- # us also needs to be loaded.
-
-code32_start: # here loaders can put a different
- # start address for 32-bit code.
-#ifndef __BIG_KERNEL__
- .long 0x1000 # 0x1000 = default for zImage
-#else
- .long 0x100000 # 0x100000 = default for big kernel
-#endif
-
-ramdisk_image: .long 0 # address of loaded ramdisk image
- # Here the loader puts the 32-bit
- # address where it loaded the image.
- # This only will be read by the kernel.
-
-ramdisk_size: .long 0 # its size in bytes
-
-bootsect_kludge:
- .long 0 # obsolete
-
-heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later)
- # space from here (exclusive) down to
- # end of setup code can be used by setup
- # for local heap purposes.
-
-pad1: .word 0
-cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
- # If nonzero, a 32-bit pointer
- # to the kernel command line.
- # The command line should be
- # located between the start of
- # setup and the end of low
- # memory (0xa0000), or it may
- # get overwritten before it
- # gets read. If this field is
- # used, there is no longer
- # anything magical about the
- # 0x90000 segment; the setup
- # can be located anywhere in
- # low memory 0x10000 or higher.
-
-ramdisk_max: .long (-__PAGE_OFFSET-(512 << 20)-1) & 0x7fffffff
- # (Header version 0x0203 or later)
- # The highest safe address for
- # the contents of an initrd
-
-kernel_alignment: .long CONFIG_PHYSICAL_ALIGN #physical addr alignment
- #required for protected mode
- #kernel
-#ifdef CONFIG_RELOCATABLE
-relocatable_kernel: .byte 1
-#else
-relocatable_kernel: .byte 0
-#endif
-pad2: .byte 0
-pad3: .word 0
-
-cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
- #added with boot protocol
- #version 2.06
-
-trampoline: call start_of_setup
- .align 16
- # The offset at this point is 0x240
- .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
-# End of setup header #####################################################
-
-start_of_setup:
-# Bootlin depends on this being done early
- movw $0x01500, %ax
- movb $0x81, %dl
- int $0x13
-
-#ifdef SAFE_RESET_DISK_CONTROLLER
-# Reset the disk controller.
- movw $0x0000, %ax
- movb $0x80, %dl
- int $0x13
-#endif
-
-# Set %ds = %cs, we know that SETUPSEG = %cs at this point
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
-# Check signature at end of setup
- cmpw $SIG1, setup_sig1
- jne bad_sig
-
- cmpw $SIG2, setup_sig2
- jne bad_sig
-
- jmp good_sig1
-
-# Routine to print asciiz string at ds:si
-prtstr:
- lodsb
- andb %al, %al
- jz fin
-
- call prtchr
- jmp prtstr
-
-fin: ret
-
-# Space printing
-prtsp2: call prtspc # Print double space
-prtspc: movb $0x20, %al # Print single space (note: fall-thru)
-
-# Part of above routine, this one just prints ascii al
-prtchr: pushw %ax
- pushw %cx
- movw $7,%bx
- movw $0x01, %cx
- movb $0x0e, %ah
- int $0x10
- popw %cx
- popw %ax
- ret
-
-beep: movb $0x07, %al
- jmp prtchr
-
-no_sig_mess: .string "No setup signature found ..."
-
-good_sig1:
- jmp good_sig
-
-# We now have to find the rest of the setup code/data
-bad_sig:
- movw %cs, %ax # SETUPSEG
- subw $DELTA_INITSEG, %ax # INITSEG
- movw %ax, %ds
- xorb %bh, %bh
- movb (497), %bl # get setup sect from bootsect
- subw $4, %bx # LILO loads 4 sectors of setup
- shlw $8, %bx # convert to words (1sect=2^8 words)
- movw %bx, %cx
- shrw $3, %bx # convert to segment
- addw $SYSSEG, %bx
- movw %bx, %cs:start_sys_seg
-# Move rest of setup code/data to here
- movw $2048, %di # four sectors loaded by LILO
- subw %si, %si
- pushw %cs
- popw %es
- movw $SYSSEG, %ax
- movw %ax, %ds
- rep
- movsw
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
- cmpw $SIG1, setup_sig1
- jne no_sig
-
- cmpw $SIG2, setup_sig2
- jne no_sig
-
- jmp good_sig
-
-no_sig:
- lea no_sig_mess, %si
- call prtstr
-
-no_sig_loop:
- hlt
- jmp no_sig_loop
-
-good_sig:
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
-# Check if an old loader tries to load a big-kernel
- testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel?
- jz loader_ok # No, no danger for old loaders.
-
- cmpb $0, %cs:type_of_loader # Do we have a loader that
- # can deal with us?
- jnz loader_ok # Yes, continue.
-
- pushw %cs # No, we have an old loader,
- popw %ds # die.
- lea loader_panic_mess, %si
- call prtstr
-
- jmp no_sig_loop
-
-loader_panic_mess: .string "Wrong loader, giving up..."
-
-# check minimum cpuid
-# we do this here because it is the last place we can actually
-# show a user visible error message. Later the video modus
-# might be already messed up.
-loader_ok:
- call verify_cpu
- testl %eax,%eax
- jz cpu_ok
- movw %cs,%ax # aka SETUPSEG
- movw %ax,%ds
- lea cpu_panic_mess,%si
- call prtstr
-1: jmp 1b
-
-cpu_panic_mess:
- .asciz "PANIC: CPU too old for this kernel."
-
-#include "../kernel/verify_cpu.S"
-
-cpu_ok:
-# Get memory size (extended mem, kB)
-
- xorl %eax, %eax
- movl %eax, (0x1e0)
-#ifndef STANDARD_MEMORY_BIOS_CALL
- movb %al, (E820NR)
-# Try three different memory detection schemes. First, try
-# e820h, which lets us assemble a memory map, then try e801h,
-# which returns a 32-bit memory size, and finally 88h, which
-# returns 0-64m
-
-# method E820H:
-# the memory map from hell. e820h returns memory classified into
-# a whole bunch of different types, and allows memory holes and
-# everything. We scan through this memory map and build a list
-# of the first 32 memory areas, which we return at [E820MAP].
-# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
-
-#define SMAP 0x534d4150
-
-meme820:
- xorl %ebx, %ebx # continuation counter
- movw $E820MAP, %di # point into the whitelist
- # so we can have the bios
- # directly write into it.
-
-jmpe820:
- movl $0x0000e820, %eax # e820, upper word zeroed
- movl $SMAP, %edx # ascii 'SMAP'
- movl $20, %ecx # size of the e820rec
- pushw %ds # data record.
- popw %es
- int $0x15 # make the call
- jc bail820 # fall to e801 if it fails
-
- cmpl $SMAP, %eax # check the return is `SMAP'
- jne bail820 # fall to e801 if it fails
-
-# cmpl $1, 16(%di) # is this usable memory?
-# jne again820
-
- # If this is usable memory, we save it by simply advancing %di by
- # sizeof(e820rec).
- #
-good820:
- movb (E820NR), %al # up to 128 entries
- cmpb $E820MAX, %al
- jae bail820
-
- incb (E820NR)
- movw %di, %ax
- addw $20, %ax
- movw %ax, %di
-again820:
- cmpl $0, %ebx # check to see if
- jne jmpe820 # %ebx is set to EOF
-bail820:
-
-
-# method E801H:
-# memory size is in 1k chunksizes, to avoid confusing loadlin.
-# we store the 0xe801 memory size in a completely different place,
-# because it will most likely be longer than 16 bits.
-# (use 1e0 because that's what Larry Augustine uses in his
-# alternative new memory detection scheme, and it's sensible
-# to write everything into the same place.)
-
-meme801:
- stc # fix to work around buggy
- xorw %cx,%cx # BIOSes which don't clear/set
- xorw %dx,%dx # carry on pass/error of
- # e801h memory size call
- # or merely pass cx,dx though
- # without changing them.
- movw $0xe801, %ax
- int $0x15
- jc mem88
-
- cmpw $0x0, %cx # Kludge to handle BIOSes
- jne e801usecxdx # which report their extended
- cmpw $0x0, %dx # memory in AX/BX rather than
- jne e801usecxdx # CX/DX. The spec I have read
- movw %ax, %cx # seems to indicate AX/BX
- movw %bx, %dx # are more reasonable anyway...
-
-e801usecxdx:
- andl $0xffff, %edx # clear sign extend
- shll $6, %edx # and go from 64k to 1k chunks
- movl %edx, (0x1e0) # store extended memory size
- andl $0xffff, %ecx # clear sign extend
- addl %ecx, (0x1e0) # and add lower memory into
- # total size.
-
-# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or
-# 64mb, depending on the bios) in ax.
-mem88:
-
-#endif
- movb $0x88, %ah
- int $0x15
- movw %ax, (2)
-
-# Set the keyboard repeat rate to the max
- movw $0x0305, %ax
- xorw %bx, %bx
- int $0x16
-
-# Check for video adapter and its parameters and allow the
-# user to browse video modes.
- call video # NOTE: we need %ds pointing
- # to bootsector
-
-# Get hd0 data...
- xorw %ax, %ax
- movw %ax, %ds
- ldsw (4 * 0x41), %si
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- pushw %ax
- movw %ax, %es
- movw $0x0080, %di
- movw $0x10, %cx
- pushw %cx
- cld
- rep
- movsb
-# Get hd1 data...
- xorw %ax, %ax
- movw %ax, %ds
- ldsw (4 * 0x46), %si
- popw %cx
- popw %es
- movw $0x0090, %di
- rep
- movsb
-# Check that there IS a hd1 :-)
- movw $0x01500, %ax
- movb $0x81, %dl
- int $0x13
- jc no_disk1
-
- cmpb $3, %ah
- je is_disk1
-
-no_disk1:
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %es
- movw $0x0090, %di
- movw $0x10, %cx
- xorw %ax, %ax
- cld
- rep
- stosb
-is_disk1:
-# check for Micro Channel (MCA) bus
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
- xorw %ax, %ax
- movw %ax, (0xa0) # set table length to 0
- movb $0xc0, %ah
- stc
- int $0x15 # moves feature table to es:bx
- jc no_mca
-
- pushw %ds
- movw %es, %ax
- movw %ax, %ds
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %es
- movw %bx, %si
- movw $0xa0, %di
- movw (%si), %cx
- addw $2, %cx # table length is a short
- cmpw $0x10, %cx
- jc sysdesc_ok
-
- movw $0x10, %cx # we keep only first 16 bytes
-sysdesc_ok:
- rep
- movsb
- popw %ds
-no_mca:
-#ifdef CONFIG_X86_VOYAGER
- movb $0xff, 0x40 # flag on config found
- movb $0xc0, %al
- mov $0xff, %ah
- int $0x15 # put voyager config info at es:di
- jc no_voyager
- movw $0x40, %si # place voyager info in apm table
- cld
- movw $7, %cx
-voyager_rep:
- movb %es:(%di), %al
- movb %al,(%si)
- incw %di
- incw %si
- decw %cx
- jnz voyager_rep
-no_voyager:
-#endif
-# Check for PS/2 pointing device
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
- movb $0, (0x1ff) # default is no pointing device
- int $0x11 # int 0x11: equipment list
- testb $0x04, %al # check if mouse installed
- jz no_psmouse
-
- movb $0xAA, (0x1ff) # device present
-no_psmouse:
-
-#if defined(CONFIG_X86_SPEEDSTEP_SMI) || defined(CONFIG_X86_SPEEDSTEP_SMI_MODULE)
- movl $0x0000E980, %eax # IST Support
- movl $0x47534943, %edx # Request value
- int $0x15
-
- movl %eax, (96)
- movl %ebx, (100)
- movl %ecx, (104)
- movl %edx, (108)
-#endif
-
-#if defined(CONFIG_APM) || defined(CONFIG_APM_MODULE)
-# Then check for an APM BIOS...
- # %ds points to the bootsector
- movw $0, 0x40 # version = 0 means no APM BIOS
- movw $0x05300, %ax # APM BIOS installation check
- xorw %bx, %bx
- int $0x15
- jc done_apm_bios # Nope, no APM BIOS
-
- cmpw $0x0504d, %bx # Check for "PM" signature
- jne done_apm_bios # No signature, no APM BIOS
-
- andw $0x02, %cx # Is 32 bit supported?
- je done_apm_bios # No 32-bit, no (good) APM BIOS
-
- movw $0x05304, %ax # Disconnect first just in case
- xorw %bx, %bx
- int $0x15 # ignore return code
- movw $0x05303, %ax # 32 bit connect
- xorl %ebx, %ebx
- xorw %cx, %cx # paranoia :-)
- xorw %dx, %dx # ...
- xorl %esi, %esi # ...
- xorw %di, %di # ...
- int $0x15
- jc no_32_apm_bios # Ack, error.
-
- movw %ax, (66) # BIOS code segment
- movl %ebx, (68) # BIOS entry point offset
- movw %cx, (72) # BIOS 16 bit code segment
- movw %dx, (74) # BIOS data segment
- movl %esi, (78) # BIOS code segment lengths
- movw %di, (82) # BIOS data segment length
-# Redo the installation check as the 32 bit connect
-# modifies the flags returned on some BIOSs
- movw $0x05300, %ax # APM BIOS installation check
- xorw %bx, %bx
- xorw %cx, %cx # paranoia
- int $0x15
- jc apm_disconnect # error -> shouldn't happen
-
- cmpw $0x0504d, %bx # check for "PM" signature
- jne apm_disconnect # no sig -> shouldn't happen
-
- movw %ax, (64) # record the APM BIOS version
- movw %cx, (76) # and flags
- jmp done_apm_bios
-
-apm_disconnect: # Tidy up
- movw $0x05304, %ax # Disconnect
- xorw %bx, %bx
- int $0x15 # ignore return code
-
- jmp done_apm_bios
-
-no_32_apm_bios:
- andw $0xfffd, (76) # remove 32 bit support bit
-done_apm_bios:
-#endif
-
-#include "edd.S"
-
-# Now we want to move to protected mode ...
- cmpw $0, %cs:realmode_swtch
- jz rmodeswtch_normal
-
- lcall *%cs:realmode_swtch
-
- jmp rmodeswtch_end
-
-rmodeswtch_normal:
- pushw %cs
- call default_switch
-
-rmodeswtch_end:
-# Now we move the system to its rightful place ... but we check if we have a
-# big-kernel. In that case we *must* not move it ...
- testb $LOADED_HIGH, %cs:loadflags
- jz do_move0 # .. then we have a normal low
- # loaded zImage
- # .. or else we have a high
- # loaded bzImage
- jmp end_move # ... and we skip moving
-
-do_move0:
- movw $0x100, %ax # start of destination segment
- movw %cs, %bp # aka SETUPSEG
- subw $DELTA_INITSEG, %bp # aka INITSEG
- movw %cs:start_sys_seg, %bx # start of source segment
- cld
-do_move:
- movw %ax, %es # destination segment
- incb %ah # instead of add ax,#0x100
- movw %bx, %ds # source segment
- addw $0x100, %bx
- subw %di, %di
- subw %si, %si
- movw $0x800, %cx
- rep
- movsw
- cmpw %bp, %bx # assume start_sys_seg > 0x200,
- # so we will perhaps read one
- # page more than needed, but
- # never overwrite INITSEG
- # because destination is a
- # minimum one page below source
- jb do_move
-
-end_move:
-# then we load the segment descriptors
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
-
-# Check whether we need to be downward compatible with version <=201
- cmpl $0, cmd_line_ptr
- jne end_move_self # loader uses version >=202 features
- cmpb $0x20, type_of_loader
- je end_move_self # bootsect loader, we know of it
-
-# Boot loader doesnt support boot protocol version 2.02.
-# If we have our code not at 0x90000, we need to move it there now.
-# We also then need to move the params behind it (commandline)
-# Because we would overwrite the code on the current IP, we move
-# it in two steps, jumping high after the first one.
- movw %cs, %ax
- cmpw $SETUPSEG, %ax
- je end_move_self
-
- cli # make sure we really have
- # interrupts disabled !
- # because after this the stack
- # should not be used
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ss, %dx
- cmpw %ax, %dx
- jb move_self_1
-
- addw $INITSEG, %dx
- subw %ax, %dx # this will go into %ss after
- # the move
-move_self_1:
- movw %ax, %ds
- movw $INITSEG, %ax # real INITSEG
- movw %ax, %es
- movw %cs:setup_move_size, %cx
- std # we have to move up, so we use
- # direction down because the
- # areas may overlap
- movw %cx, %di
- decw %di
- movw %di, %si
- subw $move_self_here+0x200, %cx
- rep
- movsb
- ljmp $SETUPSEG, $move_self_here
-
-move_self_here:
- movw $move_self_here+0x200, %cx
- rep
- movsb
- movw $SETUPSEG, %ax
- movw %ax, %ds
- movw %dx, %ss
-end_move_self: # now we are at the right place
-
-#
-# Enable A20. This is at the very best an annoying procedure.
-# A20 code ported from SYSLINUX 1.52-1.63 by H. Peter Anvin.
-# AMD Elan bug fix by Robert Schwebel.
-#
-
-#if defined(CONFIG_X86_ELAN)
- movb $0x02, %al # alternate A20 gate
- outb %al, $0x92 # this works on SC410/SC520
-a20_elan_wait:
- call a20_test
- jz a20_elan_wait
- jmp a20_done
-#endif
-
-
-A20_TEST_LOOPS = 32 # Iterations per wait
-A20_ENABLE_LOOPS = 255 # Total loops to try
-
-
-#ifndef CONFIG_X86_VOYAGER
-a20_try_loop:
-
- # First, see if we are on a system with no A20 gate.
-a20_none:
- call a20_test
- jnz a20_done
-
- # Next, try the BIOS (INT 0x15, AX=0x2401)
-a20_bios:
- movw $0x2401, %ax
- pushfl # Be paranoid about flags
- int $0x15
- popfl
-
- call a20_test
- jnz a20_done
-
- # Try enabling A20 through the keyboard controller
-#endif /* CONFIG_X86_VOYAGER */
-a20_kbc:
- call empty_8042
-
-#ifndef CONFIG_X86_VOYAGER
- call a20_test # Just in case the BIOS worked
- jnz a20_done # but had a delayed reaction.
-#endif
-
- movb $0xD1, %al # command write
- outb %al, $0x64
- call empty_8042
-
- movb $0xDF, %al # A20 on
- outb %al, $0x60
- call empty_8042
-
-#ifndef CONFIG_X86_VOYAGER
- # Wait until a20 really *is* enabled; it can take a fair amount of
- # time on certain systems; Toshiba Tecras are known to have this
- # problem.
-a20_kbc_wait:
- xorw %cx, %cx
-a20_kbc_wait_loop:
- call a20_test
- jnz a20_done
- loop a20_kbc_wait_loop
-
- # Final attempt: use "configuration port A"
-a20_fast:
- inb $0x92, %al # Configuration Port A
- orb $0x02, %al # "fast A20" version
- andb $0xFE, %al # don't accidentally reset
- outb %al, $0x92
-
- # Wait for configuration port A to take effect
-a20_fast_wait:
- xorw %cx, %cx
-a20_fast_wait_loop:
- call a20_test
- jnz a20_done
- loop a20_fast_wait_loop
-
- # A20 is still not responding. Try frobbing it again.
- #
- decb (a20_tries)
- jnz a20_try_loop
-
- movw $a20_err_msg, %si
- call prtstr
-
-a20_die:
- hlt
- jmp a20_die
-
-a20_tries:
- .byte A20_ENABLE_LOOPS
-
-a20_err_msg:
- .ascii "linux: fatal error: A20 gate not responding!"
- .byte 13, 10, 0
-
- # If we get here, all is good
-a20_done:
-
-#endif /* CONFIG_X86_VOYAGER */
-# set up gdt and idt and 32bit start address
- lidt idt_48 # load idt with 0,0
- xorl %eax, %eax # Compute gdt_base
- movw %ds, %ax # (Convert %ds:gdt to a linear ptr)
- shll $4, %eax
- addl %eax, code32
- addl $gdt, %eax
- movl %eax, (gdt_48+2)
- lgdt gdt_48 # load gdt with whatever is
- # appropriate
-
-# make sure any possible coprocessor is properly reset..
- xorw %ax, %ax
- outb %al, $0xf0
- call delay
-
- outb %al, $0xf1
- call delay
-
-# well, that went ok, I hope. Now we mask all interrupts - the rest
-# is done in init_IRQ().
- movb $0xFF, %al # mask all interrupts for now
- outb %al, $0xA1
- call delay
-
- movb $0xFB, %al # mask all irq's but irq2 which
- outb %al, $0x21 # is cascaded
-
-# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
-# need no steenking BIOS anyway (except for the initial loading :-).
-# The BIOS-routine wants lots of unnecessary data, and it's less
-# "interesting" anyway. This is how REAL programmers do it.
-#
-# Well, now's the time to actually move into protected mode. To make
-# things as simple as possible, we do no register set-up or anything,
-# we let the gnu-compiled 32-bit programs do that. We just jump to
-# absolute address 0x1000 (or the loader supplied one),
-# in 32-bit protected mode.
-#
-# Note that the short jump isn't strictly needed, although there are
-# reasons why it might be a good idea. It won't hurt in any case.
- movw $1, %ax # protected mode (PE) bit
- lmsw %ax # This is it!
- jmp flush_instr
-
-flush_instr:
- xorw %bx, %bx # Flag to indicate a boot
- xorl %esi, %esi # Pointer to real-mode code
- movw %cs, %si
- subw $DELTA_INITSEG, %si
- shll $4, %esi # Convert to 32-bit pointer
-
-# jump to startup_32 in arch/i386/boot/compressed/head.S
-#
-# NOTE: For high loaded big kernels we need a
-# jmpi 0x100000,__BOOT_CS
-#
-# but we yet haven't reloaded the CS register, so the default size
-# of the target offset still is 16 bit.
-# However, using an operand prefix (0x66), the CPU will properly
-# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
-# Manual, Mixing 16-bit and 32-bit code, page 16-6)
-
- .byte 0x66, 0xea # prefix + jmpi-opcode
-code32: .long startup_32 # will be set to %cs+startup_32
- .word __BOOT_CS
-.code32
-startup_32:
- movl $(__BOOT_DS), %eax
- movl %eax, %ds
- movl %eax, %es
- movl %eax, %fs
- movl %eax, %gs
- movl %eax, %ss
-
- xorl %eax, %eax
-1: incl %eax # check that A20 really IS enabled
- movl %eax, 0x00000000 # loop forever if it isn't
- cmpl %eax, 0x00100000
- je 1b
-
- # Jump to the 32bit entry point
- jmpl *(code32_start - start + (DELTA_INITSEG << 4))(%esi)
-.code16
-
-# Here's a bunch of information about your current kernel..
-kernel_version: .ascii UTS_RELEASE
- .ascii " ("
- .ascii LINUX_COMPILE_BY
- .ascii "@"
- .ascii LINUX_COMPILE_HOST
- .ascii ") "
- .ascii UTS_VERSION
- .byte 0
-
-# This is the default real mode switch routine.
-# to be called just before protected mode transition
-default_switch:
- cli # no interrupts allowed !
- movb $0x80, %al # disable NMI for bootup
- # sequence
- outb %al, $0x70
- lret
-
-
-#ifndef CONFIG_X86_VOYAGER
-# This routine tests whether or not A20 is enabled. If so, it
-# exits with zf = 0.
-#
-# The memory address used, 0x200, is the int $0x80 vector, which
-# should be safe.
-
-A20_TEST_ADDR = 4*0x80
-
-a20_test:
- pushw %cx
- pushw %ax
- xorw %cx, %cx
- movw %cx, %fs # Low memory
- decw %cx
- movw %cx, %gs # High memory area
- movw $A20_TEST_LOOPS, %cx
- movw %fs:(A20_TEST_ADDR), %ax
- pushw %ax
-a20_test_wait:
- incw %ax
- movw %ax, %fs:(A20_TEST_ADDR)
- call delay # Serialize and make delay constant
- cmpw %gs:(A20_TEST_ADDR+0x10), %ax
- loope a20_test_wait
-
- popw %fs:(A20_TEST_ADDR)
- popw %ax
- popw %cx
- ret
-
-#endif /* CONFIG_X86_VOYAGER */
-
-# This routine checks that the keyboard command queue is empty
-# (after emptying the output buffers)
-#
-# Some machines have delusions that the keyboard buffer is always full
-# with no keyboard attached...
-#
-# If there is no keyboard controller, we will usually get 0xff
-# to all the reads. With each IO taking a microsecond and
-# a timeout of 100,000 iterations, this can take about half a
-# second ("delay" == outb to port 0x80). That should be ok,
-# and should also be plenty of time for a real keyboard controller
-# to empty.
-#
-
-empty_8042:
- pushl %ecx
- movl $100000, %ecx
-
-empty_8042_loop:
- decl %ecx
- jz empty_8042_end_loop
-
- call delay
-
- inb $0x64, %al # 8042 status port
- testb $1, %al # output buffer?
- jz no_output
-
- call delay
- inb $0x60, %al # read it
- jmp empty_8042_loop
-
-no_output:
- testb $2, %al # is input buffer full?
- jnz empty_8042_loop # yes - loop
-empty_8042_end_loop:
- popl %ecx
- ret
-
-# Read the cmos clock. Return the seconds in al
-gettime:
- pushw %cx
- movb $0x02, %ah
- int $0x1a
- movb %dh, %al # %dh contains the seconds
- andb $0x0f, %al
- movb %dh, %ah
- movb $0x04, %cl
- shrb %cl, %ah
- aad
- popw %cx
- ret
-
-# Delay is needed after doing I/O
-delay:
- outb %al,$0x80
- ret
-
-# Descriptor tables
-#
-# NOTE: The intel manual says gdt should be sixteen bytes aligned for
-# efficiency reasons. However, there are machines which are known not
-# to boot with misaligned GDTs, so alter this at your peril! If you alter
-# GDT_ENTRY_BOOT_CS (in asm/segment.h) remember to leave at least two
-# empty GDT entries (one for NULL and one reserved).
-#
-# NOTE: On some CPUs, the GDT must be 8 byte aligned. This is
-# true for the Voyager Quad CPU card which will not boot without
-# This directive. 16 byte aligment is recommended by intel.
-#
- .align 16
-gdt:
- .fill GDT_ENTRY_BOOT_CS,8,0
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9A00 # code read/exec
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9200 # data read/write
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-gdt_end:
- .align 4
-
- .word 0 # alignment byte
-idt_48:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-
- .word 0 # alignment byte
-gdt_48:
- .word gdt_end - gdt - 1 # gdt limit
- .word 0, 0 # gdt base (filled in later)
-
-# Include video setup & detection code
-
-#include "video.S"
-
-# Setup signature -- must be last
-setup_sig1: .word SIG1
-setup_sig2: .word SIG2
-
-# After this point, there is some free space which is used by the video mode
-# handling code to store the temporary mode table (not used by the kernel).
-
-modelist:
-
-.text
-endtext:
-.data
-enddata:
-.bss
-endbss:
--- /dev/null
+/*
+ * setup.ld
+ *
+ * Linker script for the i386 setup code
+ */
+OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
+OUTPUT_ARCH(i386)
+ENTRY(_start)
+
+SECTIONS
+{
+ . = 0;
+ .bstext : { *(.bstext) }
+ .bsdata : { *(.bsdata) }
+
+ . = 497;
+ .header : { *(.header) }
+ .inittext : { *(.inittext) }
+ .initdata : { *(.initdata) }
+ .text : { *(.text*) }
+
+ . = ALIGN(16);
+ .rodata : { *(.rodata*) }
+
+ .videocards : {
+ video_cards = .;
+ *(.videocards)
+ video_cards_end = .;
+ }
+
+ . = ALIGN(16);
+ .data : { *(.data*) }
+
+ .signature : {
+ setup_sig = .;
+ LONG(0x5a5aaa55)
+ }
+
+
+ . = ALIGN(16);
+ .bss :
+ {
+ __bss_start = .;
+ *(.bss)
+ __bss_end = .;
+ }
+ . = ALIGN(16);
+ _end = .;
+
+ /DISCARD/ : { *(.note*) }
+
+ . = ASSERT(_end <= 0x8000, "Setup too big!");
+ . = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
+}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/string.c
+ *
+ * Very basic string functions
+ */
+
+#include "boot.h"
+
+int strcmp(const char *str1, const char *str2)
+{
+ const unsigned char *s1 = (const unsigned char *)str1;
+ const unsigned char *s2 = (const unsigned char *)str2;
+ int delta = 0;
+
+ while (*s1 || *s2) {
+ delta = *s2 - *s1;
+ if (delta)
+ return delta;
+ s1++;
+ s2++;
+ }
+ return 0;
+}
+
+size_t strnlen(const char *s, size_t maxlen)
+{
+ const char *es = s;
+ while (*es && maxlen) {
+ es++;
+ maxlen--;
+ }
+
+ return (es - s);
+}
+
+unsigned int atou(const char *s)
+{
+ unsigned int i = 0;
+ while (isdigit(*s))
+ i = i * 10 + (*s++ - '0');
+ return i;
+}
/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 1997 Martin Mares
+ * Copyright (C) 2007 H. Peter Anvin
*/
/*
* This file builds a disk-image from three different files:
*
- * - bootsect: compatibility mbr which prints an error message if
- * someone tries to boot the kernel directly.
* - setup: 8086 machine code, sets up system parm
* - system: 80386 code for actual system
*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
* Cross compiling fixes by Gertjan van Wingerde, July 1996
* Rewritten by Martin Mares, April 1997
+ * Substantially overhauled by H. Peter Anvin, April 2007
*/
#include <stdio.h>
#include <sys/sysmacros.h>
#include <unistd.h>
#include <fcntl.h>
+#include <sys/mman.h>
#include <asm/boot.h>
-typedef unsigned char byte;
-typedef unsigned short word;
-typedef unsigned long u32;
+typedef unsigned char u8;
+typedef unsigned short u16;
+typedef unsigned long u32;
#define DEFAULT_MAJOR_ROOT 0
#define DEFAULT_MINOR_ROOT 0
-/* Minimal number of setup sectors (see also bootsect.S) */
-#define SETUP_SECTS 4
+/* Minimal number of setup sectors */
+#define SETUP_SECT_MIN 5
+#define SETUP_SECT_MAX 64
-byte buf[1024];
-int fd;
+/* This must be large enough to hold the entire setup */
+u8 buf[SETUP_SECT_MAX*512];
int is_big_kernel;
-void die(const char * str, ...)
+static void die(const char * str, ...)
{
va_list args;
va_start(args, str);
exit(1);
}
-void file_open(const char *name)
+static void usage(void)
{
- if ((fd = open(name, O_RDONLY, 0)) < 0)
- die("Unable to open `%s': %m", name);
-}
-
-void usage(void)
-{
- die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
+ die("Usage: build [-b] setup system [rootdev] [> image]");
}
int main(int argc, char ** argv)
unsigned int i, sz, setup_sectors;
int c;
u32 sys_size;
- byte major_root, minor_root;
+ u8 major_root, minor_root;
struct stat sb;
+ FILE *file;
+ int fd;
+ void *kernel;
if (argc > 2 && !strcmp(argv[1], "-b"))
{
is_big_kernel = 1;
argc--, argv++;
}
- if ((argc < 4) || (argc > 5))
+ if ((argc < 3) || (argc > 4))
usage();
- if (argc > 4) {
- if (!strcmp(argv[4], "CURRENT")) {
+ if (argc > 3) {
+ if (!strcmp(argv[3], "CURRENT")) {
if (stat("/", &sb)) {
perror("/");
die("Couldn't stat /");
}
major_root = major(sb.st_dev);
minor_root = minor(sb.st_dev);
- } else if (strcmp(argv[4], "FLOPPY")) {
- if (stat(argv[4], &sb)) {
- perror(argv[4]);
+ } else if (strcmp(argv[3], "FLOPPY")) {
+ if (stat(argv[3], &sb)) {
+ perror(argv[3]);
die("Couldn't stat root device.");
}
major_root = major(sb.st_rdev);
}
fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
- file_open(argv[1]);
- i = read(fd, buf, sizeof(buf));
- fprintf(stderr,"Boot sector %d bytes.\n",i);
- if (i != 512)
- die("Boot block must be exactly 512 bytes");
+ /* Copy the setup code */
+ file = fopen(argv[1], "r");
+ if (!file)
+ die("Unable to open `%s': %m", argv[1]);
+ c = fread(buf, 1, sizeof(buf), file);
+ if (ferror(file))
+ die("read-error on `setup'");
+ if (c < 1024)
+ die("The setup must be at least 1024 bytes");
if (buf[510] != 0x55 || buf[511] != 0xaa)
die("Boot block hasn't got boot flag (0xAA55)");
+ fclose(file);
+
+ /* Pad unused space with zeros */
+ setup_sectors = (c + 511) / 512;
+ if (setup_sectors < SETUP_SECT_MIN)
+ setup_sectors = SETUP_SECT_MIN;
+ i = setup_sectors*512;
+ memset(buf+c, 0, i-c);
+
+ /* Set the default root device */
buf[508] = minor_root;
buf[509] = major_root;
- if (write(1, buf, 512) != 512)
- die("Write call failed");
- close (fd);
-
- file_open(argv[2]); /* Copy the setup code */
- for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
- if (write(1, buf, c) != c)
- die("Write call failed");
- if (c != 0)
- die("read-error on `setup'");
- close (fd);
-
- setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */
- /* for compatibility with ancient versions of LILO. */
- if (setup_sectors < SETUP_SECTS)
- setup_sectors = SETUP_SECTS;
- fprintf(stderr, "Setup is %d bytes.\n", i);
- memset(buf, 0, sizeof(buf));
- while (i < setup_sectors * 512) {
- c = setup_sectors * 512 - i;
- if (c > sizeof(buf))
- c = sizeof(buf);
- if (write(1, buf, c) != c)
- die("Write call failed");
- i += c;
- }
- file_open(argv[3]);
- if (fstat (fd, &sb))
- die("Unable to stat `%s': %m", argv[3]);
+ fprintf(stderr, "Setup is %d bytes (padded to %d bytes).\n", c, i);
+
+ /* Open and stat the kernel file */
+ fd = open(argv[2], O_RDONLY);
+ if (fd < 0)
+ die("Unable to open `%s': %m", argv[2]);
+ if (fstat(fd, &sb))
+ die("Unable to stat `%s': %m", argv[2]);
sz = sb.st_size;
- fprintf (stderr, "System is %d kB\n", sz/1024);
+ fprintf (stderr, "System is %d kB\n", (sz+1023)/1024);
+ kernel = mmap(NULL, sz, PROT_READ, MAP_SHARED, fd, 0);
+ if (kernel == MAP_FAILED)
+ die("Unable to mmap '%s': %m", argv[2]);
sys_size = (sz + 15) / 16;
if (!is_big_kernel && sys_size > DEF_SYSSIZE)
die("System is too big. Try using bzImage or modules.");
- while (sz > 0) {
- int l, n;
-
- l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
- if ((n=read(fd, buf, l)) != l) {
- if (n < 0)
- die("Error reading %s: %m", argv[3]);
- else
- die("%s: Unexpected EOF", argv[3]);
- }
- if (write(1, buf, l) != l)
- die("Write failed");
- sz -= l;
- }
+
+ /* Patch the setup code with the appropriate size parameters */
+ buf[0x1f1] = setup_sectors-1;
+ buf[0x1f4] = sys_size;
+ buf[0x1f5] = sys_size >> 8;
+ buf[0x1f6] = sys_size >> 16;
+ buf[0x1f7] = sys_size >> 24;
+
+ if (fwrite(buf, 1, i, stdout) != i)
+ die("Writing setup failed");
+
+ /* Copy the kernel code */
+ if (fwrite(kernel, 1, sz, stdout) != sz)
+ die("Writing kernel failed");
close(fd);
- if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */
- die("Output: seek failed");
- buf[0] = setup_sectors;
- if (write(1, buf, 1) != 1)
- die("Write of setup sector count failed");
- if (lseek(1, 500, SEEK_SET) != 500)
- die("Output: seek failed");
- buf[0] = (sys_size & 0xff);
- buf[1] = ((sys_size >> 8) & 0xff);
- buf[2] = ((sys_size >> 16) & 0xff);
- buf[3] = ((sys_size >> 24) & 0xff);
- if (write(1, buf, 4) != 4)
- die("Write of image length failed");
-
- return 0; /* Everything is OK */
+ /* Everything is OK */
+ return 0;
}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/tty.c
+ *
+ * Very simple screen I/O
+ * XXX: Probably should add very simple serial I/O?
+ */
+
+#include "boot.h"
+
+/*
+ * These functions are in .inittext so they can be used to signal
+ * error during initialization.
+ */
+
+void __attribute__((section(".inittext"))) putchar(int ch)
+{
+ unsigned char c = ch;
+
+ if (c == '\n')
+ putchar('\r'); /* \n -> \r\n */
+
+ /* int $0x10 is known to have bugs involving touching registers
+ it shouldn't. Be extra conservative... */
+ asm volatile("pushal; int $0x10; popal"
+ : : "b" (0x0007), "c" (0x0001), "a" (0x0e00|ch));
+}
+
+void __attribute__((section(".inittext"))) puts(const char *str)
+{
+ int n = 0;
+ while (*str) {
+ putchar(*str++);
+ n++;
+ }
+}
+
+/*
+ * Read the CMOS clock through the BIOS, and return the
+ * seconds in BCD.
+ */
+
+static u8 gettime(void)
+{
+ u16 ax = 0x0200;
+ u16 cx, dx;
+
+ asm("int $0x1a"
+ : "+a" (ax), "=c" (cx), "=d" (dx)
+ : : "ebx", "esi", "edi");
+
+ return dx >> 8;
+}
+
+/*
+ * Read from the keyboard
+ */
+int getchar(void)
+{
+ u16 ax = 0;
+ asm("int $0x16" : "+a" (ax));
+
+ return ax & 0xff;
+}
+
+static int kbd_pending(void)
+{
+ u8 pending;
+ asm("int $0x16; setnz %0"
+ : "=rm" (pending)
+ : "a" (0x0100));
+ return pending;
+}
+
+void kbd_flush(void)
+{
+ for (;;) {
+ if (!kbd_pending())
+ break;
+ getchar();
+ }
+}
+
+int getchar_timeout(void)
+{
+ int cnt = 30;
+ int t0, t1;
+
+ t0 = gettime();
+
+ while (cnt) {
+ if (kbd_pending())
+ return getchar();
+
+ t1 = gettime();
+ if (t0 != t1) {
+ cnt--;
+ t0 = t1;
+ }
+ }
+
+ return 0; /* Timeout! */
+}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/version.c
+ *
+ * Kernel version string
+ */
+
+#include "boot.h"
+#include <linux/utsrelease.h>
+#include <linux/compile.h>
+
+const char kernel_version[] =
+ UTS_RELEASE " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") "
+ UTS_VERSION;
--- /dev/null
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright 1999-2007 H. Peter Anvin - All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, Inc., 53 Temple Place Ste 330,
+ * Boston MA 02111-1307, USA; either version 2 of the License, or
+ * (at your option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+#ifndef BOOT_VESA_H
+#define BOOT_VESA_H
+
+typedef struct {
+ u16 off, seg;
+} far_ptr;
+
+/* VESA General Information table */
+struct vesa_general_info {
+ u32 signature; /* 0 Magic number = "VESA" */
+ u16 version; /* 4 */
+ far_ptr vendor_string; /* 6 */
+ u32 capabilities; /* 10 */
+ far_ptr video_mode_ptr; /* 14 */
+ u16 total_memory; /* 18 */
+
+ u16 oem_software_rev; /* 20 */
+ far_ptr oem_vendor_name_ptr; /* 22 */
+ far_ptr oem_product_name_ptr; /* 26 */
+ far_ptr oem_product_rev_ptr; /* 30 */
+
+ u8 reserved[222]; /* 34 */
+ u8 oem_data[256]; /* 256 */
+} __attribute__ ((packed));
+
+#define VESA_MAGIC ('V' + ('E' << 8) + ('S' << 16) + ('A' << 24))
+#define VBE2_MAGIC ('V' + ('B' << 8) + ('E' << 16) + ('2' << 24))
+
+struct vesa_mode_info {
+ u16 mode_attr; /* 0 */
+ u8 win_attr[2]; /* 2 */
+ u16 win_grain; /* 4 */
+ u16 win_size; /* 6 */
+ u16 win_seg[2]; /* 8 */
+ far_ptr win_scheme; /* 12 */
+ u16 logical_scan; /* 16 */
+
+ u16 h_res; /* 18 */
+ u16 v_res; /* 20 */
+ u8 char_width; /* 22 */
+ u8 char_height; /* 23 */
+ u8 memory_planes; /* 24 */
+ u8 bpp; /* 25 */
+ u8 banks; /* 26 */
+ u8 memory_layout; /* 27 */
+ u8 bank_size; /* 28 */
+ u8 image_planes; /* 29 */
+ u8 page_function; /* 30 */
+
+ u8 rmask; /* 31 */
+ u8 rpos; /* 32 */
+ u8 gmask; /* 33 */
+ u8 gpos; /* 34 */
+ u8 bmask; /* 35 */
+ u8 bpos; /* 36 */
+ u8 resv_mask; /* 37 */
+ u8 resv_pos; /* 38 */
+ u8 dcm_info; /* 39 */
+
+ u32 lfb_ptr; /* 40 Linear frame buffer address */
+ u32 offscreen_ptr; /* 44 Offscreen memory address */
+ u16 offscreen_size; /* 48 */
+
+ u8 reserved[206]; /* 50 */
+} __attribute__ ((packed));
+
+#endif /* LIB_SYS_VESA_H */
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/video-bios.c
+ *
+ * Standard video BIOS modes
+ *
+ * We have two options for this; silent and scanned.
+ */
+
+#include "boot.h"
+#include "video.h"
+
+__videocard video_bios;
+
+/* Set a conventional BIOS mode */
+static int set_bios_mode(u8 mode);
+
+static int bios_set_mode(struct mode_info *mi)
+{
+ return set_bios_mode(mi->mode - VIDEO_FIRST_BIOS);
+}
+
+static int set_bios_mode(u8 mode)
+{
+ u16 ax;
+ u8 new_mode;
+
+ ax = mode; /* AH=0x00 Set Video Mode */
+ asm volatile(INT10
+ : "+a" (ax)
+ : : "ebx", "ecx", "edx", "esi", "edi");
+
+ ax = 0x0f00; /* Get Current Video Mode */
+ asm volatile(INT10
+ : "+a" (ax)
+ : : "ebx", "ecx", "edx", "esi", "edi");
+
+ do_restore = 1; /* Assume video contents was lost */
+ new_mode = ax & 0x7f; /* Not all BIOSes are clean with the top bit */
+
+ if (new_mode == mode)
+ return 0; /* Mode change OK */
+
+ if (new_mode != boot_params.screen_info.orig_video_mode) {
+ /* Mode setting failed, but we didn't end up where we
+ started. That's bad. Try to revert to the original
+ video mode. */
+ ax = boot_params.screen_info.orig_video_mode;
+ asm volatile(INT10
+ : "+a" (ax)
+ : : "ebx", "ecx", "edx", "esi", "edi");
+ }
+ return -1;
+}
+
+static int bios_probe(void)
+{
+ u8 mode;
+ u8 saved_mode = boot_params.screen_info.orig_video_mode;
+ u16 crtc;
+ struct mode_info *mi;
+ int nmodes = 0;
+
+ if (adapter != ADAPTER_EGA && adapter != ADAPTER_VGA)
+ return 0;
+
+ set_fs(0);
+ crtc = vga_crtc();
+
+ video_bios.modes = GET_HEAP(struct mode_info, 0);
+
+ for (mode = 0x14; mode <= 0x7f; mode++) {
+ if (heap_free() < sizeof(struct mode_info))
+ break;
+
+ if (mode_defined(VIDEO_FIRST_BIOS+mode))
+ continue;
+
+ if (set_bios_mode(mode))
+ continue;
+
+ /* Try to verify that it's a text mode. */
+
+ /* Attribute Controller: make graphics controller disabled */
+ if (in_idx(0x3c0, 0x10) & 0x01)
+ continue;
+
+ /* Graphics Controller: verify Alpha addressing enabled */
+ if (in_idx(0x3ce, 0x06) & 0x01)
+ continue;
+
+ /* CRTC cursor location low should be zero(?) */
+ if (in_idx(crtc, 0x0f))
+ continue;
+
+ mi = GET_HEAP(struct mode_info, 1);
+ mi->mode = VIDEO_FIRST_BIOS+mode;
+ mi->x = rdfs16(0x44a);
+ mi->y = rdfs8(0x484)+1;
+ nmodes++;
+ }
+
+ set_bios_mode(saved_mode);
+
+ return nmodes;
+}
+
+__videocard video_bios =
+{
+ .card_name = "BIOS (scanned)",
+ .probe = bios_probe,
+ .set_mode = bios_set_mode,
+ .unsafe = 1,
+ .xmode_first = VIDEO_FIRST_BIOS,
+ .xmode_n = 0x80,
+};
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/video-vesa.c
+ *
+ * VESA text modes
+ */
+
+#include "boot.h"
+#include "video.h"
+#include "vesa.h"
+
+/* VESA information */
+static struct vesa_general_info vginfo;
+static struct vesa_mode_info vminfo;
+
+__videocard video_vesa;
+
+static void vesa_store_mode_params_graphics(void);
+
+static int vesa_probe(void)
+{
+#if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID)
+ u16 ax;
+ u16 mode;
+ addr_t mode_ptr;
+ struct mode_info *mi;
+ int nmodes = 0;
+
+ video_vesa.modes = GET_HEAP(struct mode_info, 0);
+
+ vginfo.signature = VBE2_MAGIC;
+
+ /* Optimistically assume a VESA BIOS is register-clean... */
+ ax = 0x4f00;
+ asm("int $0x10" : "+a" (ax), "=m" (vginfo) : "D" (&vginfo));
+
+ if (ax != 0x004f ||
+ vginfo.signature != VESA_MAGIC ||
+ vginfo.version < 0x0102)
+ return 0; /* Not present */
+#endif /* CONFIG_VIDEO_VESA || CONFIG_FIRMWARE_EDID */
+#ifdef CONFIG_VIDEO_VESA
+ set_fs(vginfo.video_mode_ptr.seg);
+ mode_ptr = vginfo.video_mode_ptr.off;
+
+ while ((mode = rdfs16(mode_ptr)) != 0xffff) {
+ mode_ptr += 2;
+
+ if (heap_free() < sizeof(struct mode_info))
+ break; /* Heap full, can't save mode info */
+
+ if (mode & ~0x1ff)
+ continue;
+
+ memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
+
+ ax = 0x4f01;
+ asm("int $0x10"
+ : "+a" (ax), "=m" (vminfo)
+ : "c" (mode), "D" (&vminfo));
+
+ if (ax != 0x004f)
+ continue;
+
+ if ((vminfo.mode_attr & 0x15) == 0x05) {
+ /* Text Mode, TTY BIOS supported,
+ supported by hardware */
+ mi = GET_HEAP(struct mode_info, 1);
+ mi->mode = mode + VIDEO_FIRST_VESA;
+ mi->x = vminfo.h_res;
+ mi->y = vminfo.v_res;
+ nmodes++;
+ } else if ((vminfo.mode_attr & 0x99) == 0x99) {
+#ifdef CONFIG_FB
+ /* Graphics mode, color, linear frame buffer
+ supported -- register the mode but hide from
+ the menu. Only do this if framebuffer is
+ configured, however, otherwise the user will
+ be left without a screen. */
+ mi = GET_HEAP(struct mode_info, 1);
+ mi->mode = mode + VIDEO_FIRST_VESA;
+ mi->x = mi->y = 0;
+ nmodes++;
+#endif
+ }
+ }
+
+ return nmodes;
+#else
+ return 0;
+#endif /* CONFIG_VIDEO_VESA */
+}
+
+static int vesa_set_mode(struct mode_info *mode)
+{
+ u16 ax;
+ int is_graphic;
+ u16 vesa_mode = mode->mode - VIDEO_FIRST_VESA;
+
+ memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
+
+ ax = 0x4f01;
+ asm("int $0x10"
+ : "+a" (ax), "=m" (vminfo)
+ : "c" (vesa_mode), "D" (&vminfo));
+
+ if (ax != 0x004f)
+ return -1;
+
+ if ((vminfo.mode_attr & 0x15) == 0x05) {
+ /* It's a supported text mode */
+ is_graphic = 0;
+ } else if ((vminfo.mode_attr & 0x99) == 0x99) {
+ /* It's a graphics mode with linear frame buffer */
+ is_graphic = 1;
+ vesa_mode |= 0x4000; /* Request linear frame buffer */
+ } else {
+ return -1; /* Invalid mode */
+ }
+
+
+ ax = 0x4f02;
+ asm volatile("int $0x10"
+ : "+a" (ax)
+ : "b" (vesa_mode), "D" (0));
+
+ if (ax != 0x004f)
+ return -1;
+
+ graphic_mode = is_graphic;
+ if (!is_graphic) {
+ /* Text mode */
+ force_x = mode->x;
+ force_y = mode->y;
+ do_restore = 1;
+ } else {
+ /* Graphics mode */
+ vesa_store_mode_params_graphics();
+ }
+
+ return 0;
+}
+
+
+/* Switch DAC to 8-bit mode */
+static void vesa_dac_set_8bits(void)
+{
+ u8 dac_size = 6;
+
+ /* If possible, switch the DAC to 8-bit mode */
+ if (vginfo.capabilities & 1) {
+ u16 ax, bx;
+
+ ax = 0x4f08;
+ bx = 0x0800;
+ asm volatile(INT10
+ : "+a" (ax), "+b" (bx)
+ : : "ecx", "edx", "esi", "edi");
+
+ if (ax == 0x004f)
+ dac_size = bx >> 8;
+ }
+
+ /* Set the color sizes to the DAC size, and offsets to 0 */
+ boot_params.screen_info.red_size = dac_size;
+ boot_params.screen_info.green_size = dac_size;
+ boot_params.screen_info.blue_size = dac_size;
+ boot_params.screen_info.rsvd_size = dac_size;
+
+ boot_params.screen_info.red_pos = 0;
+ boot_params.screen_info.green_pos = 0;
+ boot_params.screen_info.blue_pos = 0;
+ boot_params.screen_info.rsvd_pos = 0;
+}
+
+/* Save the VESA protected mode info */
+static void vesa_store_pm_info(void)
+{
+ u16 ax, bx, di, es;
+
+ ax = 0x4f0a;
+ bx = di = 0;
+ asm("pushw %%es; "INT10"; movw %%es,%0; popw %%es"
+ : "=d" (es), "+a" (ax), "+b" (bx), "+D" (di)
+ : : "ecx", "esi");
+
+ if (ax != 0x004f)
+ return;
+
+ boot_params.screen_info.vesapm_seg = es;
+ boot_params.screen_info.vesapm_off = di;
+}
+
+/*
+ * Save video mode parameters for graphics mode
+ */
+static void vesa_store_mode_params_graphics(void)
+{
+ /* Tell the kernel we're in VESA graphics mode */
+ boot_params.screen_info.orig_video_isVGA = 0x23;
+
+ /* Mode parameters */
+ boot_params.screen_info.vesa_attributes = vminfo.mode_attr;
+ boot_params.screen_info.lfb_linelength = vminfo.logical_scan;
+ boot_params.screen_info.lfb_width = vminfo.h_res;
+ boot_params.screen_info.lfb_height = vminfo.v_res;
+ boot_params.screen_info.lfb_depth = vminfo.bpp;
+ boot_params.screen_info.pages = vminfo.image_planes;
+ boot_params.screen_info.lfb_base = vminfo.lfb_ptr;
+ memcpy(&boot_params.screen_info.red_size,
+ &vminfo.rmask, 8);
+
+ /* General parameters */
+ boot_params.screen_info.lfb_size = vginfo.total_memory;
+
+ if (vminfo.bpp <= 8)
+ vesa_dac_set_8bits();
+
+ vesa_store_pm_info();
+}
+
+/*
+ * Save EDID information for the kernel; this is invoked, separately,
+ * after mode-setting.
+ */
+void vesa_store_edid(void)
+{
+#ifdef CONFIG_FIRMWARE_EDID
+ u16 ax, bx, cx, dx, di;
+
+ /* Apparently used as a nonsense token... */
+ memset(&boot_params.edid_info, 0x13, sizeof boot_params.edid_info);
+
+ if (vginfo.version < 0x0200)
+ return; /* EDID requires VBE 2.0+ */
+
+ ax = 0x4f15; /* VBE DDC */
+ bx = 0x0000; /* Report DDC capabilities */
+ cx = 0; /* Controller 0 */
+ di = 0; /* ES:DI must be 0 by spec */
+
+ /* Note: The VBE DDC spec is different from the main VESA spec;
+ we genuinely have to assume all registers are destroyed here. */
+
+ asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es"
+ : "+a" (ax), "+b" (bx)
+ : "c" (cx), "D" (di)
+ : "esi");
+
+ if (ax != 0x004f)
+ return; /* No EDID */
+
+ /* BH = time in seconds to transfer EDD information */
+ /* BL = DDC level supported */
+
+ ax = 0x4f15; /* VBE DDC */
+ bx = 0x0001; /* Read EDID */
+ cx = 0; /* Controller 0 */
+ dx = 0; /* EDID block number */
+ di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */
+ asm(INT10
+ : "+a" (ax), "+b" (bx), "+d" (dx)
+ : "c" (cx), "D" (di)
+ : "esi");
+#endif /* CONFIG_FIRMWARE_EDID */
+}
+
+__videocard video_vesa =
+{
+ .card_name = "VESA",
+ .probe = vesa_probe,
+ .set_mode = vesa_set_mode,
+ .xmode_first = VIDEO_FIRST_VESA,
+ .xmode_n = 0x200,
+};
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/video-vga.c
+ *
+ * Common all-VGA modes
+ */
+
+#include "boot.h"
+#include "video.h"
+
+static struct mode_info vga_modes[] = {
+ { VIDEO_80x25, 80, 25 },
+ { VIDEO_8POINT, 80, 50 },
+ { VIDEO_80x43, 80, 43 },
+ { VIDEO_80x28, 80, 28 },
+ { VIDEO_80x30, 80, 30 },
+ { VIDEO_80x34, 80, 34 },
+ { VIDEO_80x60, 80, 60 },
+};
+
+static struct mode_info ega_modes[] = {
+ { VIDEO_80x25, 80, 25 },
+ { VIDEO_8POINT, 80, 43 },
+};
+
+static struct mode_info cga_modes[] = {
+ { VIDEO_80x25, 80, 25 },
+};
+
+__videocard video_vga;
+
+/* Set basic 80x25 mode */
+static u8 vga_set_basic_mode(void)
+{
+ u16 ax;
+ u8 rows;
+ u8 mode;
+
+#ifdef CONFIG_VIDEO_400_HACK
+ if (adapter >= ADAPTER_VGA) {
+ asm(INT10
+ : : "a" (0x1202), "b" (0x0030)
+ : "ecx", "edx", "esi", "edi");
+ }
+#endif
+
+ ax = 0x0f00;
+ asm(INT10
+ : "+a" (ax)
+ : : "ebx", "ecx", "edx", "esi", "edi");
+
+ mode = (u8)ax;
+
+ set_fs(0);
+ rows = rdfs8(0x484); /* rows minus one */
+
+#ifndef CONFIG_VIDEO_400_HACK
+ if ((ax == 0x5003 || ax == 0x5007) &&
+ (rows == 0 || rows == 24))
+ return mode;
+#endif
+
+ if (mode != 3 && mode != 7)
+ mode = 3;
+
+ /* Set the mode */
+ asm volatile(INT10
+ : : "a" (mode)
+ : "ebx", "ecx", "edx", "esi", "edi");
+ do_restore = 1;
+ return mode;
+}
+
+static void vga_set_8font(void)
+{
+ /* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */
+
+ /* Set 8x8 font */
+ asm volatile(INT10 : : "a" (0x1112), "b" (0));
+
+ /* Use alternate print screen */
+ asm volatile(INT10 : : "a" (0x1200), "b" (0x20));
+
+ /* Turn off cursor emulation */
+ asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
+
+ /* Cursor is scan lines 6-7 */
+ asm volatile(INT10 : : "a" (0x0100), "c" (0x0607));
+}
+
+static void vga_set_14font(void)
+{
+ /* Set 9x14 font - 80x28 on VGA */
+
+ /* Set 9x14 font */
+ asm volatile(INT10 : : "a" (0x1111), "b" (0));
+
+ /* Turn off cursor emulation */
+ asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
+
+ /* Cursor is scan lines 11-12 */
+ asm volatile(INT10 : : "a" (0x0100), "c" (0x0b0c));
+}
+
+static void vga_set_80x43(void)
+{
+ /* Set 80x43 mode on VGA (not EGA) */
+
+ /* Set 350 scans */
+ asm volatile(INT10 : : "a" (0x1201), "b" (0x30));
+
+ /* Reset video mode */
+ asm volatile(INT10 : : "a" (0x0003));
+
+ vga_set_8font();
+}
+
+/* I/O address of the VGA CRTC */
+u16 vga_crtc(void)
+{
+ return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4;
+}
+
+static void vga_set_480_scanlines(int end)
+{
+ u16 crtc;
+ u8 csel;
+
+ crtc = vga_crtc();
+
+ out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */
+ out_idx(0x0b, crtc, 0x06); /* Vertical total */
+ out_idx(0x3e, crtc, 0x07); /* Vertical overflow */
+ out_idx(0xea, crtc, 0x10); /* Vertical sync start */
+ out_idx(end, crtc, 0x12); /* Vertical display end */
+ out_idx(0xe7, crtc, 0x15); /* Vertical blank start */
+ out_idx(0x04, crtc, 0x16); /* Vertical blank end */
+ csel = inb(0x3cc);
+ csel &= 0x0d;
+ csel |= 0xe2;
+ outb(csel, 0x3cc);
+}
+
+static void vga_set_80x30(void)
+{
+ vga_set_480_scanlines(0xdf);
+}
+
+static void vga_set_80x34(void)
+{
+ vga_set_14font();
+ vga_set_480_scanlines(0xdb);
+}
+
+static void vga_set_80x60(void)
+{
+ vga_set_8font();
+ vga_set_480_scanlines(0xdf);
+}
+
+static int vga_set_mode(struct mode_info *mode)
+{
+ /* Set the basic mode */
+ vga_set_basic_mode();
+
+ /* Override a possibly broken BIOS */
+ force_x = mode->x;
+ force_y = mode->y;
+
+ switch (mode->mode) {
+ case VIDEO_80x25:
+ break;
+ case VIDEO_8POINT:
+ vga_set_8font();
+ break;
+ case VIDEO_80x43:
+ vga_set_80x43();
+ break;
+ case VIDEO_80x28:
+ vga_set_14font();
+ break;
+ case VIDEO_80x30:
+ vga_set_80x30();
+ break;
+ case VIDEO_80x34:
+ vga_set_80x34();
+ break;
+ case VIDEO_80x60:
+ vga_set_80x60();
+ break;
+ }
+
+ return 0;
+}
+
+/*
+ * Note: this probe includes basic information required by all
+ * systems. It should be executed first, by making sure
+ * video-vga.c is listed first in the Makefile.
+ */
+static int vga_probe(void)
+{
+ static const char *card_name[] = {
+ "CGA/MDA/HGC", "EGA", "VGA"
+ };
+ static struct mode_info *mode_lists[] = {
+ cga_modes,
+ ega_modes,
+ vga_modes,
+ };
+ static int mode_count[] = {
+ sizeof(cga_modes)/sizeof(struct mode_info),
+ sizeof(ega_modes)/sizeof(struct mode_info),
+ sizeof(vga_modes)/sizeof(struct mode_info),
+ };
+ u8 vga_flag;
+
+ asm(INT10
+ : "=b" (boot_params.screen_info.orig_video_ega_bx)
+ : "a" (0x1200), "b" (0x10) /* Check EGA/VGA */
+ : "ecx", "edx", "esi", "edi");
+
+ /* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */
+ if ((u8)boot_params.screen_info.orig_video_ega_bx != 0x10) {
+ /* EGA/VGA */
+ asm(INT10
+ : "=a" (vga_flag)
+ : "a" (0x1a00)
+ : "ebx", "ecx", "edx", "esi", "edi");
+
+ if (vga_flag == 0x1a) {
+ adapter = ADAPTER_VGA;
+ boot_params.screen_info.orig_video_isVGA = 1;
+ } else {
+ adapter = ADAPTER_EGA;
+ }
+ } else {
+ adapter = ADAPTER_CGA;
+ }
+
+ video_vga.modes = mode_lists[adapter];
+ video_vga.card_name = card_name[adapter];
+ return mode_count[adapter];
+}
+
+__videocard video_vga =
+{
+ .card_name = "VGA",
+ .probe = vga_probe,
+ .set_mode = vga_set_mode,
+};
+++ /dev/null
-/* video.S
- *
- * Display adapter & video mode setup, version 2.13 (14-May-99)
- *
- * Copyright (C) 1995 -- 1998 Martin Mares <mj@ucw.cz>
- * Based on the original setup.S code (C) Linus Torvalds and Mats Anderson
- *
- * Rewritten to use GNU 'as' by Chris Noe <stiker@northlink.com> May 1999
- *
- * For further information, look at Documentation/svga.txt.
- *
- */
-
-/* Enable autodetection of SVGA adapters and modes. */
-#undef CONFIG_VIDEO_SVGA
-
-/* Enable autodetection of VESA modes */
-#define CONFIG_VIDEO_VESA
-
-/* Enable compacting of mode table */
-#define CONFIG_VIDEO_COMPACT
-
-/* Retain screen contents when switching modes */
-#define CONFIG_VIDEO_RETAIN
-
-/* Enable local mode list */
-#undef CONFIG_VIDEO_LOCAL
-
-/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
-#undef CONFIG_VIDEO_400_HACK
-
-/* Hack that lets you force specific BIOS mode ID and specific dimensions */
-#undef CONFIG_VIDEO_GFX_HACK
-#define VIDEO_GFX_BIOS_AX 0x4f02 /* 800x600 on ThinkPad */
-#define VIDEO_GFX_BIOS_BX 0x0102
-#define VIDEO_GFX_DUMMY_RESOLUTION 0x6425 /* 100x37 */
-
-/* This code uses an extended set of video mode numbers. These include:
- * Aliases for standard modes
- * NORMAL_VGA (-1)
- * EXTENDED_VGA (-2)
- * ASK_VGA (-3)
- * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
- * of compatibility when extending the table. These are between 0x00 and 0xff.
- */
-#define VIDEO_FIRST_MENU 0x0000
-
-/* Standard BIOS video modes (BIOS number + 0x0100) */
-#define VIDEO_FIRST_BIOS 0x0100
-
-/* VESA BIOS video modes (VESA number + 0x0200) */
-#define VIDEO_FIRST_VESA 0x0200
-
-/* Video7 special modes (BIOS number + 0x0900) */
-#define VIDEO_FIRST_V7 0x0900
-
-/* Special video modes */
-#define VIDEO_FIRST_SPECIAL 0x0f00
-#define VIDEO_80x25 0x0f00
-#define VIDEO_8POINT 0x0f01
-#define VIDEO_80x43 0x0f02
-#define VIDEO_80x28 0x0f03
-#define VIDEO_CURRENT_MODE 0x0f04
-#define VIDEO_80x30 0x0f05
-#define VIDEO_80x34 0x0f06
-#define VIDEO_80x60 0x0f07
-#define VIDEO_GFX_HACK 0x0f08
-#define VIDEO_LAST_SPECIAL 0x0f09
-
-/* Video modes given by resolution */
-#define VIDEO_FIRST_RESOLUTION 0x1000
-
-/* The "recalculate timings" flag */
-#define VIDEO_RECALC 0x8000
-
-/* Positions of various video parameters passed to the kernel */
-/* (see also include/linux/tty.h) */
-#define PARAM_CURSOR_POS 0x00
-#define PARAM_VIDEO_PAGE 0x04
-#define PARAM_VIDEO_MODE 0x06
-#define PARAM_VIDEO_COLS 0x07
-#define PARAM_VIDEO_EGA_BX 0x0a
-#define PARAM_VIDEO_LINES 0x0e
-#define PARAM_HAVE_VGA 0x0f
-#define PARAM_FONT_POINTS 0x10
-
-#define PARAM_LFB_WIDTH 0x12
-#define PARAM_LFB_HEIGHT 0x14
-#define PARAM_LFB_DEPTH 0x16
-#define PARAM_LFB_BASE 0x18
-#define PARAM_LFB_SIZE 0x1c
-#define PARAM_LFB_LINELENGTH 0x24
-#define PARAM_LFB_COLORS 0x26
-#define PARAM_VESAPM_SEG 0x2e
-#define PARAM_VESAPM_OFF 0x30
-#define PARAM_LFB_PAGES 0x32
-#define PARAM_VESA_ATTRIB 0x34
-#define PARAM_CAPABILITIES 0x36
-
-/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
-#ifdef CONFIG_VIDEO_RETAIN
-#define DO_STORE call store_screen
-#else
-#define DO_STORE
-#endif /* CONFIG_VIDEO_RETAIN */
-
-# This is the main entry point called by setup.S
-# %ds *must* be pointing to the bootsector
-video: pushw %ds # We use different segments
- pushw %ds # FS contains original DS
- popw %fs
- pushw %cs # DS is equal to CS
- popw %ds
- pushw %cs # ES is equal to CS
- popw %es
- xorw %ax, %ax
- movw %ax, %gs # GS is zero
- cld
- call basic_detect # Basic adapter type testing (EGA/VGA/MDA/CGA)
-#ifdef CONFIG_VIDEO_SELECT
- movw %fs:(0x01fa), %ax # User selected video mode
- cmpw $ASK_VGA, %ax # Bring up the menu
- jz vid2
-
- call mode_set # Set the mode
- jc vid1
-
- leaw badmdt, %si # Invalid mode ID
- call prtstr
-vid2: call mode_menu
-vid1:
-#ifdef CONFIG_VIDEO_RETAIN
- call restore_screen # Restore screen contents
-#endif /* CONFIG_VIDEO_RETAIN */
- call store_edid
-#endif /* CONFIG_VIDEO_SELECT */
- call mode_params # Store mode parameters
- popw %ds # Restore original DS
- ret
-
-# Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel.
-basic_detect:
- movb $0, %fs:(PARAM_HAVE_VGA)
- movb $0x12, %ah # Check EGA/VGA
- movb $0x10, %bl
- int $0x10
- movw %bx, %fs:(PARAM_VIDEO_EGA_BX) # Identifies EGA to the kernel
- cmpb $0x10, %bl # No, it's a CGA/MDA/HGA card.
- je basret
-
- incb adapter
- movw $0x1a00, %ax # Check EGA or VGA?
- int $0x10
- cmpb $0x1a, %al # 1a means VGA...
- jne basret # anything else is EGA.
-
- incb %fs:(PARAM_HAVE_VGA) # We've detected a VGA
- incb adapter
-basret: ret
-
-# Store the video mode parameters for later usage by the kernel.
-# This is done by asking the BIOS except for the rows/columns
-# parameters in the default 80x25 mode -- these are set directly,
-# because some very obscure BIOSes supply insane values.
-mode_params:
-#ifdef CONFIG_VIDEO_SELECT
- cmpb $0, graphic_mode
- jnz mopar_gr
-#endif
- movb $0x03, %ah # Read cursor position
- xorb %bh, %bh
- int $0x10
- movw %dx, %fs:(PARAM_CURSOR_POS)
- movb $0x0f, %ah # Read page/mode/width
- int $0x10
- movw %bx, %fs:(PARAM_VIDEO_PAGE)
- movw %ax, %fs:(PARAM_VIDEO_MODE) # Video mode and screen width
- cmpb $0x7, %al # MDA/HGA => segment differs
- jnz mopar0
-
- movw $0xb000, video_segment
-mopar0: movw %gs:(0x485), %ax # Font size
- movw %ax, %fs:(PARAM_FONT_POINTS) # (valid only on EGA/VGA)
- movw force_size, %ax # Forced size?
- orw %ax, %ax
- jz mopar1
-
- movb %ah, %fs:(PARAM_VIDEO_COLS)
- movb %al, %fs:(PARAM_VIDEO_LINES)
- ret
-
-mopar1: movb $25, %al
- cmpb $0, adapter # If we are on CGA/MDA/HGA, the
- jz mopar2 # screen must have 25 lines.
-
- movb %gs:(0x484), %al # On EGA/VGA, use the EGA+ BIOS
- incb %al # location of max lines.
-mopar2: movb %al, %fs:(PARAM_VIDEO_LINES)
- ret
-
-#ifdef CONFIG_VIDEO_SELECT
-# Fetching of VESA frame buffer parameters
-mopar_gr:
- leaw modelist+1024, %di
- movb $0x23, %fs:(PARAM_HAVE_VGA)
- movw 16(%di), %ax
- movw %ax, %fs:(PARAM_LFB_LINELENGTH)
- movw 18(%di), %ax
- movw %ax, %fs:(PARAM_LFB_WIDTH)
- movw 20(%di), %ax
- movw %ax, %fs:(PARAM_LFB_HEIGHT)
- movb 25(%di), %al
- movb $0, %ah
- movw %ax, %fs:(PARAM_LFB_DEPTH)
- movb 29(%di), %al
- movb $0, %ah
- movw %ax, %fs:(PARAM_LFB_PAGES)
- movl 40(%di), %eax
- movl %eax, %fs:(PARAM_LFB_BASE)
- movl 31(%di), %eax
- movl %eax, %fs:(PARAM_LFB_COLORS)
- movl 35(%di), %eax
- movl %eax, %fs:(PARAM_LFB_COLORS+4)
- movw 0(%di), %ax
- movw %ax, %fs:(PARAM_VESA_ATTRIB)
-
-# get video mem size
- leaw modelist+1024, %di
- movw $0x4f00, %ax
- int $0x10
- xorl %eax, %eax
- movw 18(%di), %ax
- movl %eax, %fs:(PARAM_LFB_SIZE)
-
-# store mode capabilities
- movl 10(%di), %eax
- movl %eax, %fs:(PARAM_CAPABILITIES)
-
-# switching the DAC to 8-bit is for <= 8 bpp only
- movw %fs:(PARAM_LFB_DEPTH), %ax
- cmpw $8, %ax
- jg dac_done
-
-# get DAC switching capability
- xorl %eax, %eax
- movb 10(%di), %al
- testb $1, %al
- jz dac_set
-
-# attempt to switch DAC to 8-bit
- movw $0x4f08, %ax
- movw $0x0800, %bx
- int $0x10
- cmpw $0x004f, %ax
- jne dac_set
- movb %bh, dac_size # store actual DAC size
-
-dac_set:
-# set color size to DAC size
- movb dac_size, %al
- movb %al, %fs:(PARAM_LFB_COLORS+0)
- movb %al, %fs:(PARAM_LFB_COLORS+2)
- movb %al, %fs:(PARAM_LFB_COLORS+4)
- movb %al, %fs:(PARAM_LFB_COLORS+6)
-
-# set color offsets to 0
- movb $0, %fs:(PARAM_LFB_COLORS+1)
- movb $0, %fs:(PARAM_LFB_COLORS+3)
- movb $0, %fs:(PARAM_LFB_COLORS+5)
- movb $0, %fs:(PARAM_LFB_COLORS+7)
-
-dac_done:
-# get protected mode interface informations
- movw $0x4f0a, %ax
- xorw %bx, %bx
- xorw %di, %di
- int $0x10
- cmp $0x004f, %ax
- jnz no_pm
-
- movw %es, %fs:(PARAM_VESAPM_SEG)
- movw %di, %fs:(PARAM_VESAPM_OFF)
-no_pm: ret
-
-# The video mode menu
-mode_menu:
- leaw keymsg, %si # "Return/Space/Timeout" message
- call prtstr
- call flush
-nokey: call getkt
-
- cmpb $0x0d, %al # ENTER ?
- je listm # yes - manual mode selection
-
- cmpb $0x20, %al # SPACE ?
- je defmd1 # no - repeat
-
- call beep
- jmp nokey
-
-defmd1: ret # No mode chosen? Default 80x25
-
-listm: call mode_table # List mode table
-listm0: leaw name_bann, %si # Print adapter name
- call prtstr
- movw card_name, %si
- orw %si, %si
- jnz an2
-
- movb adapter, %al
- leaw old_name, %si
- orb %al, %al
- jz an1
-
- leaw ega_name, %si
- decb %al
- jz an1
-
- leaw vga_name, %si
- jmp an1
-
-an2: call prtstr
- leaw svga_name, %si
-an1: call prtstr
- leaw listhdr, %si # Table header
- call prtstr
- movb $0x30, %dl # DL holds mode number
- leaw modelist, %si
-lm1: cmpw $ASK_VGA, (%si) # End?
- jz lm2
-
- movb %dl, %al # Menu selection number
- call prtchr
- call prtsp2
- lodsw
- call prthw # Mode ID
- call prtsp2
- movb 0x1(%si), %al
- call prtdec # Rows
- movb $0x78, %al # the letter 'x'
- call prtchr
- lodsw
- call prtdec # Columns
- movb $0x0d, %al # New line
- call prtchr
- movb $0x0a, %al
- call prtchr
- incb %dl # Next character
- cmpb $0x3a, %dl
- jnz lm1
-
- movb $0x61, %dl
- jmp lm1
-
-lm2: leaw prompt, %si # Mode prompt
- call prtstr
- leaw edit_buf, %di # Editor buffer
-lm3: call getkey
- cmpb $0x0d, %al # Enter?
- jz lment
-
- cmpb $0x08, %al # Backspace?
- jz lmbs
-
- cmpb $0x20, %al # Printable?
- jc lm3
-
- cmpw $edit_buf+4, %di # Enough space?
- jz lm3
-
- stosb
- call prtchr
- jmp lm3
-
-lmbs: cmpw $edit_buf, %di # Backspace
- jz lm3
-
- decw %di
- movb $0x08, %al
- call prtchr
- call prtspc
- movb $0x08, %al
- call prtchr
- jmp lm3
-
-lment: movb $0, (%di)
- leaw crlft, %si
- call prtstr
- leaw edit_buf, %si
- cmpb $0, (%si) # Empty string = default mode
- jz lmdef
-
- cmpb $0, 1(%si) # One character = menu selection
- jz mnusel
-
- cmpw $0x6373, (%si) # "scan" => mode scanning
- jnz lmhx
-
- cmpw $0x6e61, 2(%si)
- jz lmscan
-
-lmhx: xorw %bx, %bx # Else => mode ID in hex
-lmhex: lodsb
- orb %al, %al
- jz lmuse1
-
- subb $0x30, %al
- jc lmbad
-
- cmpb $10, %al
- jc lmhx1
-
- subb $7, %al
- andb $0xdf, %al
- cmpb $10, %al
- jc lmbad
-
- cmpb $16, %al
- jnc lmbad
-
-lmhx1: shlw $4, %bx
- orb %al, %bl
- jmp lmhex
-
-lmuse1: movw %bx, %ax
- jmp lmuse
-
-mnusel: lodsb # Menu selection
- xorb %ah, %ah
- subb $0x30, %al
- jc lmbad
-
- cmpb $10, %al
- jc lmuse
-
- cmpb $0x61-0x30, %al
- jc lmbad
-
- subb $0x61-0x30-10, %al
- cmpb $36, %al
- jnc lmbad
-
-lmuse: call mode_set
- jc lmdef
-
-lmbad: leaw unknt, %si
- call prtstr
- jmp lm2
-lmscan: cmpb $0, adapter # Scanning only on EGA/VGA
- jz lmbad
-
- movw $0, mt_end # Scanning of modes is
- movb $1, scanning # done as new autodetection.
- call mode_table
- jmp listm0
-lmdef: ret
-
-# Additional parts of mode_set... (relative jumps, you know)
-setv7: # Video7 extended modes
- DO_STORE
- subb $VIDEO_FIRST_V7>>8, %bh
- movw $0x6f05, %ax
- int $0x10
- stc
- ret
-
-_setrec: jmp setrec # Ugly...
-_set_80x25: jmp set_80x25
-
-# Aliases for backward compatibility.
-setalias:
- movw $VIDEO_80x25, %ax
- incw %bx
- jz mode_set
-
- movb $VIDEO_8POINT-VIDEO_FIRST_SPECIAL, %al
- incw %bx
- jnz setbad # Fall-through!
-
-# Setting of user mode (AX=mode ID) => CF=success
-mode_set:
- movw %ax, %fs:(0x01fa) # Store mode for use in acpi_wakeup.S
- movw %ax, %bx
- cmpb $0xff, %ah
- jz setalias
-
- testb $VIDEO_RECALC>>8, %ah
- jnz _setrec
-
- cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
- jnc setres
-
- cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
- jz setspc
-
- cmpb $VIDEO_FIRST_V7>>8, %ah
- jz setv7
-
- cmpb $VIDEO_FIRST_VESA>>8, %ah
- jnc check_vesa
-
- orb %ah, %ah
- jz setmenu
-
- decb %ah
- jz setbios
-
-setbad: clc
- movb $0, do_restore # The screen needn't be restored
- ret
-
-setvesa:
- DO_STORE
- subb $VIDEO_FIRST_VESA>>8, %bh
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz setbad # AH=0 if OK
-
- stc
- ret
-
-setbios:
- DO_STORE
- int $0x10 # Standard BIOS mode set call
- pushw %bx
- movb $0x0f, %ah # Check if really set
- int $0x10
- popw %bx
- cmpb %bl, %al
- jnz setbad
-
- stc
- ret
-
-setspc: xorb %bh, %bh # Set special mode
- cmpb $VIDEO_LAST_SPECIAL-VIDEO_FIRST_SPECIAL, %bl
- jnc setbad
-
- addw %bx, %bx
- jmp *spec_inits(%bx)
-
-setmenu:
- orb %al, %al # 80x25 is an exception
- jz _set_80x25
-
- pushw %bx # Set mode chosen from menu
- call mode_table # Build the mode table
- popw %ax
- shlw $2, %ax
- addw %ax, %si
- cmpw %di, %si
- jnc setbad
-
- movw (%si), %ax # Fetch mode ID
-_m_s: jmp mode_set
-
-setres: pushw %bx # Set mode chosen by resolution
- call mode_table
- popw %bx
- xchgb %bl, %bh
-setr1: lodsw
- cmpw $ASK_VGA, %ax # End of the list?
- jz setbad
-
- lodsw
- cmpw %bx, %ax
- jnz setr1
-
- movw -4(%si), %ax # Fetch mode ID
- jmp _m_s
-
-check_vesa:
-#ifdef CONFIG_FIRMWARE_EDID
- leaw modelist+1024, %di
- movw $0x4f00, %ax
- int $0x10
- cmpw $0x004f, %ax
- jnz setbad
-
- movw 4(%di), %ax
- movw %ax, vbe_version
-#endif
- leaw modelist+1024, %di
- subb $VIDEO_FIRST_VESA>>8, %bh
- movw %bx, %cx # Get mode information structure
- movw $0x4f01, %ax
- int $0x10
- addb $VIDEO_FIRST_VESA>>8, %bh
- cmpw $0x004f, %ax
- jnz setbad
-
- movb (%di), %al # Check capabilities.
- andb $0x19, %al
- cmpb $0x09, %al
- jz setvesa # This is a text mode
-
- movb (%di), %al # Check capabilities.
- andb $0x99, %al
- cmpb $0x99, %al
- jnz _setbad # Doh! No linear frame buffer.
-
- subb $VIDEO_FIRST_VESA>>8, %bh
- orw $0x4000, %bx # Use linear frame buffer
- movw $0x4f02, %ax # VESA BIOS mode set call
- int $0x10
- cmpw $0x004f, %ax # AL=4f if implemented
- jnz _setbad # AH=0 if OK
-
- movb $1, graphic_mode # flag graphic mode
- movb $0, do_restore # no screen restore
- stc
- ret
-
-_setbad: jmp setbad # Ugly...
-
-# Recalculate vertical display end registers -- this fixes various
-# inconsistencies of extended modes on many adapters. Called when
-# the VIDEO_RECALC flag is set in the mode ID.
-
-setrec: subb $VIDEO_RECALC>>8, %ah # Set the base mode
- call mode_set
- jnc rct3
-
- movw %gs:(0x485), %ax # Font size in pixels
- movb %gs:(0x484), %bl # Number of rows
- incb %bl
- mulb %bl # Number of visible
- decw %ax # scan lines - 1
- movw $0x3d4, %dx
- movw %ax, %bx
- movb $0x12, %al # Lower 8 bits
- movb %bl, %ah
- outw %ax, %dx
- movb $0x07, %al # Bits 8 and 9 in the overflow register
- call inidx
- xchgb %al, %ah
- andb $0xbd, %ah
- shrb %bh
- jnc rct1
- orb $0x02, %ah
-rct1: shrb %bh
- jnc rct2
- orb $0x40, %ah
-rct2: movb $0x07, %al
- outw %ax, %dx
- stc
-rct3: ret
-
-# Table of routines for setting of the special modes.
-spec_inits:
- .word set_80x25
- .word set_8pixel
- .word set_80x43
- .word set_80x28
- .word set_current
- .word set_80x30
- .word set_80x34
- .word set_80x60
- .word set_gfx
-
-# Set the 80x25 mode. If already set, do nothing.
-set_80x25:
- movw $0x5019, force_size # Override possibly broken BIOS
-use_80x25:
-#ifdef CONFIG_VIDEO_400_HACK
- movw $0x1202, %ax # Force 400 scan lines
- movb $0x30, %bl
- int $0x10
-#else
- movb $0x0f, %ah # Get current mode ID
- int $0x10
- cmpw $0x5007, %ax # Mode 7 (80x25 mono) is the only one available
- jz st80 # on CGA/MDA/HGA and is also available on EGAM
-
- cmpw $0x5003, %ax # Unknown mode, force 80x25 color
- jnz force3
-
-st80: cmpb $0, adapter # CGA/MDA/HGA => mode 3/7 is always 80x25
- jz set80
-
- movb %gs:(0x0484), %al # This is EGA+ -- beware of 80x50 etc.
- orb %al, %al # Some buggy BIOS'es set 0 rows
- jz set80
-
- cmpb $24, %al # It's hopefully correct
- jz set80
-#endif /* CONFIG_VIDEO_400_HACK */
-force3: DO_STORE
- movw $0x0003, %ax # Forced set
- int $0x10
-set80: stc
- ret
-
-# Set the 80x50/80x43 8-pixel mode. Simple BIOS calls.
-set_8pixel:
- DO_STORE
- call use_80x25 # The base is 80x25
-set_8pt:
- movw $0x1112, %ax # Use 8x8 font
- xorb %bl, %bl
- int $0x10
- movw $0x1200, %ax # Use alternate print screen
- movb $0x20, %bl
- int $0x10
- movw $0x1201, %ax # Turn off cursor emulation
- movb $0x34, %bl
- int $0x10
- movb $0x01, %ah # Define cursor scan lines 6-7
- movw $0x0607, %cx
- int $0x10
-set_current:
- stc
- ret
-
-# Set the 80x28 mode. This mode works on all VGA's, because it's a standard
-# 80x25 mode with 14-point fonts instead of 16-point.
-set_80x28:
- DO_STORE
- call use_80x25 # The base is 80x25
-set14: movw $0x1111, %ax # Use 9x14 font
- xorb %bl, %bl
- int $0x10
- movb $0x01, %ah # Define cursor scan lines 11-12
- movw $0x0b0c, %cx
- int $0x10
- stc
- ret
-
-# Set the 80x43 mode. This mode is works on all VGA's.
-# It's a 350-scanline mode with 8-pixel font.
-set_80x43:
- DO_STORE
- movw $0x1201, %ax # Set 350 scans
- movb $0x30, %bl
- int $0x10
- movw $0x0003, %ax # Reset video mode
- int $0x10
- jmp set_8pt # Use 8-pixel font
-
-# Set the 80x30 mode (all VGA's). 480 scanlines, 16-pixel font.
-set_80x30:
- call use_80x25 # Start with real 80x25
- DO_STORE
- movw $0x3cc, %dx # Get CRTC port
- inb %dx, %al
- movb $0xd4, %dl
- rorb %al # Mono or color?
- jc set48a
-
- movb $0xb4, %dl
-set48a: movw $0x0c11, %ax # Vertical sync end (also unlocks CR0-7)
- call outidx
- movw $0x0b06, %ax # Vertical total
- call outidx
- movw $0x3e07, %ax # (Vertical) overflow
- call outidx
- movw $0xea10, %ax # Vertical sync start
- call outidx
- movw $0xdf12, %ax # Vertical display end
- call outidx
- movw $0xe715, %ax # Vertical blank start
- call outidx
- movw $0x0416, %ax # Vertical blank end
- call outidx
- pushw %dx
- movb $0xcc, %dl # Misc output register (read)
- inb %dx, %al
- movb $0xc2, %dl # (write)
- andb $0x0d, %al # Preserve clock select bits and color bit
- orb $0xe2, %al # Set correct sync polarity
- outb %al, %dx
- popw %dx
- movw $0x501e, force_size
- stc # That's all.
- ret
-
-# Set the 80x34 mode (all VGA's). 480 scans, 14-pixel font.
-set_80x34:
- call set_80x30 # Set 480 scans
- call set14 # And 14-pt font
- movw $0xdb12, %ax # VGA vertical display end
- movw $0x5022, force_size
-setvde: call outidx
- stc
- ret
-
-# Set the 80x60 mode (all VGA's). 480 scans, 8-pixel font.
-set_80x60:
- call set_80x30 # Set 480 scans
- call set_8pt # And 8-pt font
- movw $0xdf12, %ax # VGA vertical display end
- movw $0x503c, force_size
- jmp setvde
-
-# Special hack for ThinkPad graphics
-set_gfx:
-#ifdef CONFIG_VIDEO_GFX_HACK
- movw $VIDEO_GFX_BIOS_AX, %ax
- movw $VIDEO_GFX_BIOS_BX, %bx
- int $0x10
- movw $VIDEO_GFX_DUMMY_RESOLUTION, force_size
- stc
-#endif
- ret
-
-#ifdef CONFIG_VIDEO_RETAIN
-
-# Store screen contents to temporary buffer.
-store_screen:
- cmpb $0, do_restore # Already stored?
- jnz stsr
-
- testb $CAN_USE_HEAP, loadflags # Have we space for storing?
- jz stsr
-
- pushw %ax
- pushw %bx
- pushw force_size # Don't force specific size
- movw $0, force_size
- call mode_params # Obtain params of current mode
- popw force_size
- movb %fs:(PARAM_VIDEO_LINES), %ah
- movb %fs:(PARAM_VIDEO_COLS), %al
- movw %ax, %bx # BX=dimensions
- mulb %ah
- movw %ax, %cx # CX=number of characters
- addw %ax, %ax # Calculate image size
- addw $modelist+1024+4, %ax
- cmpw heap_end_ptr, %ax
- jnc sts1 # Unfortunately, out of memory
-
- movw %fs:(PARAM_CURSOR_POS), %ax # Store mode params
- leaw modelist+1024, %di
- stosw
- movw %bx, %ax
- stosw
- pushw %ds # Store the screen
- movw video_segment, %ds
- xorw %si, %si
- rep
- movsw
- popw %ds
- incb do_restore # Screen will be restored later
-sts1: popw %bx
- popw %ax
-stsr: ret
-
-# Restore screen contents from temporary buffer.
-restore_screen:
- cmpb $0, do_restore # Has the screen been stored?
- jz res1
-
- call mode_params # Get parameters of current mode
- movb %fs:(PARAM_VIDEO_LINES), %cl
- movb %fs:(PARAM_VIDEO_COLS), %ch
- leaw modelist+1024, %si # Screen buffer
- lodsw # Set cursor position
- movw %ax, %dx
- cmpb %cl, %dh
- jc res2
-
- movb %cl, %dh
- decb %dh
-res2: cmpb %ch, %dl
- jc res3
-
- movb %ch, %dl
- decb %dl
-res3: movb $0x02, %ah
- movb $0x00, %bh
- int $0x10
- lodsw # Display size
- movb %ah, %dl # DL=number of lines
- movb $0, %ah # BX=phys. length of orig. line
- movw %ax, %bx
- cmpb %cl, %dl # Too many?
- jc res4
-
- pushw %ax
- movb %dl, %al
- subb %cl, %al
- mulb %bl
- addw %ax, %si
- addw %ax, %si
- popw %ax
- movb %cl, %dl
-res4: cmpb %ch, %al # Too wide?
- jc res5
-
- movb %ch, %al # AX=width of src. line
-res5: movb $0, %cl
- xchgb %ch, %cl
- movw %cx, %bp # BP=width of dest. line
- pushw %es
- movw video_segment, %es
- xorw %di, %di # Move the data
- addw %bx, %bx # Convert BX and BP to _bytes_
- addw %bp, %bp
-res6: pushw %si
- pushw %di
- movw %ax, %cx
- rep
- movsw
- popw %di
- popw %si
- addw %bp, %di
- addw %bx, %si
- decb %dl
- jnz res6
-
- popw %es # Done
-res1: ret
-#endif /* CONFIG_VIDEO_RETAIN */
-
-# Write to indexed VGA register (AL=index, AH=data, DX=index reg. port)
-outidx: outb %al, %dx
- pushw %ax
- movb %ah, %al
- incw %dx
- outb %al, %dx
- decw %dx
- popw %ax
- ret
-
-# Build the table of video modes (stored after the setup.S code at the
-# `modelist' label. Each video mode record looks like:
-# .word MODE-ID (our special mode ID (see above))
-# .byte rows (number of rows)
-# .byte columns (number of columns)
-# Returns address of the end of the table in DI, the end is marked
-# with a ASK_VGA ID.
-mode_table:
- movw mt_end, %di # Already filled?
- orw %di, %di
- jnz mtab1x
-
- leaw modelist, %di # Store standard modes:
- movl $VIDEO_80x25 + 0x50190000, %eax # The 80x25 mode (ALL)
- stosl
- movb adapter, %al # CGA/MDA/HGA -- no more modes
- orb %al, %al
- jz mtabe
-
- decb %al
- jnz mtabv
-
- movl $VIDEO_8POINT + 0x502b0000, %eax # The 80x43 EGA mode
- stosl
- jmp mtabe
-
-mtab1x: jmp mtab1
-
-mtabv: leaw vga_modes, %si # All modes for std VGA
- movw $vga_modes_end-vga_modes, %cx
- rep # I'm unable to use movsw as I don't know how to store a half
- movsb # of the expression above to cx without using explicit shr.
-
- cmpb $0, scanning # Mode scan requested?
- jz mscan1
-
- call mode_scan
-mscan1:
-
-#ifdef CONFIG_VIDEO_LOCAL
- call local_modes
-#endif /* CONFIG_VIDEO_LOCAL */
-
-#ifdef CONFIG_VIDEO_VESA
- call vesa_modes # Detect VESA VGA modes
-#endif /* CONFIG_VIDEO_VESA */
-
-#ifdef CONFIG_VIDEO_SVGA
- cmpb $0, scanning # Bypass when scanning
- jnz mscan2
-
- call svga_modes # Detect SVGA cards & modes
-mscan2:
-#endif /* CONFIG_VIDEO_SVGA */
-
-mtabe:
-
-#ifdef CONFIG_VIDEO_COMPACT
- leaw modelist, %si
- movw %di, %dx
- movw %si, %di
-cmt1: cmpw %dx, %si # Scan all modes
- jz cmt2
-
- leaw modelist, %bx # Find in previous entries
- movw 2(%si), %cx
-cmt3: cmpw %bx, %si
- jz cmt4
-
- cmpw 2(%bx), %cx # Found => don't copy this entry
- jz cmt5
-
- addw $4, %bx
- jmp cmt3
-
-cmt4: movsl # Copy entry
- jmp cmt1
-
-cmt5: addw $4, %si # Skip entry
- jmp cmt1
-
-cmt2:
-#endif /* CONFIG_VIDEO_COMPACT */
-
- movw $ASK_VGA, (%di) # End marker
- movw %di, mt_end
-mtab1: leaw modelist, %si # SI=mode list, DI=list end
-ret0: ret
-
-# Modes usable on all standard VGAs
-vga_modes:
- .word VIDEO_8POINT
- .word 0x5032 # 80x50
- .word VIDEO_80x43
- .word 0x502b # 80x43
- .word VIDEO_80x28
- .word 0x501c # 80x28
- .word VIDEO_80x30
- .word 0x501e # 80x30
- .word VIDEO_80x34
- .word 0x5022 # 80x34
- .word VIDEO_80x60
- .word 0x503c # 80x60
-#ifdef CONFIG_VIDEO_GFX_HACK
- .word VIDEO_GFX_HACK
- .word VIDEO_GFX_DUMMY_RESOLUTION
-#endif
-
-vga_modes_end:
-# Detect VESA modes.
-
-#ifdef CONFIG_VIDEO_VESA
-vesa_modes:
- cmpb $2, adapter # VGA only
- jnz ret0
-
- movw %di, %bp # BP=original mode table end
- addw $0x200, %di # Buffer space
- movw $0x4f00, %ax # VESA Get card info call
- int $0x10
- movw %bp, %di
- cmpw $0x004f, %ax # Successful?
- jnz ret0
-
- cmpw $0x4556, 0x200(%di)
- jnz ret0
-
- cmpw $0x4153, 0x202(%di)
- jnz ret0
-
- movw $vesa_name, card_name # Set name to "VESA VGA"
- pushw %gs
- lgsw 0x20e(%di), %si # GS:SI=mode list
- movw $128, %cx # Iteration limit
-vesa1:
-# gas version 2.9.1, using BFD version 2.9.1.0.23 buggers the next inst.
-# XXX: lodsw %gs:(%si), %ax # Get next mode in the list
- gs; lodsw
- cmpw $0xffff, %ax # End of the table?
- jz vesar
-
- cmpw $0x0080, %ax # Check validity of mode ID
- jc vesa2
-
- orb %ah, %ah # Valid IDs: 0x0000-0x007f/0x0100-0x07ff
- jz vesan # Certain BIOSes report 0x80-0xff!
-
- cmpw $0x0800, %ax
- jnc vesae
-
-vesa2: pushw %cx
- movw %ax, %cx # Get mode information structure
- movw $0x4f01, %ax
- int $0x10
- movw %cx, %bx # BX=mode number
- addb $VIDEO_FIRST_VESA>>8, %bh
- popw %cx
- cmpw $0x004f, %ax
- jnz vesan # Don't report errors (buggy BIOSES)
-
- movb (%di), %al # Check capabilities. We require
- andb $0x19, %al # a color text mode.
- cmpb $0x09, %al
- jnz vesan
-
- cmpw $0xb800, 8(%di) # Standard video memory address required
- jnz vesan
-
- testb $2, (%di) # Mode characteristics supplied?
- movw %bx, (%di) # Store mode number
- jz vesa3
-
- xorw %dx, %dx
- movw 0x12(%di), %bx # Width
- orb %bh, %bh
- jnz vesan
-
- movb %bl, 0x3(%di)
- movw 0x14(%di), %ax # Height
- orb %ah, %ah
- jnz vesan
-
- movb %al, 2(%di)
- mulb %bl
- cmpw $8193, %ax # Small enough for Linux console driver?
- jnc vesan
-
- jmp vesaok
-
-vesa3: subw $0x8108, %bx # This mode has no detailed info specified,
- jc vesan # so it must be a standard VESA mode.
-
- cmpw $5, %bx
- jnc vesan
-
- movw vesa_text_mode_table(%bx), %ax
- movw %ax, 2(%di)
-vesaok: addw $4, %di # The mode is valid. Store it.
-vesan: loop vesa1 # Next mode. Limit exceeded => error
-vesae: leaw vesaer, %si
- call prtstr
- movw %bp, %di # Discard already found modes.
-vesar: popw %gs
- ret
-
-# Dimensions of standard VESA text modes
-vesa_text_mode_table:
- .byte 60, 80 # 0108
- .byte 25, 132 # 0109
- .byte 43, 132 # 010A
- .byte 50, 132 # 010B
- .byte 60, 132 # 010C
-#endif /* CONFIG_VIDEO_VESA */
-
-# Scan for video modes. A bit dirty, but should work.
-mode_scan:
- movw $0x0100, %cx # Start with mode 0
-scm1: movb $0, %ah # Test the mode
- movb %cl, %al
- int $0x10
- movb $0x0f, %ah
- int $0x10
- cmpb %cl, %al
- jnz scm2 # Mode not set
-
- movw $0x3c0, %dx # Test if it's a text mode
- movb $0x10, %al # Mode bits
- call inidx
- andb $0x03, %al
- jnz scm2
-
- movb $0xce, %dl # Another set of mode bits
- movb $0x06, %al
- call inidx
- shrb %al
- jc scm2
-
- movb $0xd4, %dl # Cursor location
- movb $0x0f, %al
- call inidx
- orb %al, %al
- jnz scm2
-
- movw %cx, %ax # Ok, store the mode
- stosw
- movb %gs:(0x484), %al # Number of rows
- incb %al
- stosb
- movw %gs:(0x44a), %ax # Number of columns
- stosb
-scm2: incb %cl
- jns scm1
-
- movw $0x0003, %ax # Return back to mode 3
- int $0x10
- ret
-
-tstidx: outw %ax, %dx # OUT DX,AX and inidx
-inidx: outb %al, %dx # Read from indexed VGA register
- incw %dx # AL=index, DX=index reg port -> AL=data
- inb %dx, %al
- decw %dx
- ret
-
-# Try to detect type of SVGA card and supply (usually approximate) video
-# mode table for it.
-
-#ifdef CONFIG_VIDEO_SVGA
-svga_modes:
- leaw svga_table, %si # Test all known SVGA adapters
-dosvga: lodsw
- movw %ax, %bp # Default mode table
- orw %ax, %ax
- jz didsv1
-
- lodsw # Pointer to test routine
- pushw %si
- pushw %di
- pushw %es
- movw $0xc000, %bx
- movw %bx, %es
- call *%ax # Call test routine
- popw %es
- popw %di
- popw %si
- orw %bp, %bp
- jz dosvga
-
- movw %bp, %si # Found, copy the modes
- movb svga_prefix, %ah
-cpsvga: lodsb
- orb %al, %al
- jz didsv
-
- stosw
- movsw
- jmp cpsvga
-
-didsv: movw %si, card_name # Store pointer to card name
-didsv1: ret
-
-# Table of all known SVGA cards. For each card, we store a pointer to
-# a table of video modes supported by the card and a pointer to a routine
-# used for testing of presence of the card. The video mode table is always
-# followed by the name of the card or the chipset.
-svga_table:
- .word ati_md, ati_test
- .word oak_md, oak_test
- .word paradise_md, paradise_test
- .word realtek_md, realtek_test
- .word s3_md, s3_test
- .word chips_md, chips_test
- .word video7_md, video7_test
- .word cirrus5_md, cirrus5_test
- .word cirrus6_md, cirrus6_test
- .word cirrus1_md, cirrus1_test
- .word ahead_md, ahead_test
- .word everex_md, everex_test
- .word genoa_md, genoa_test
- .word trident_md, trident_test
- .word tseng_md, tseng_test
- .word 0
-
-# Test routines and mode tables:
-
-# S3 - The test algorithm was taken from the SuperProbe package
-# for XFree86 1.2.1. Report bugs to Christoph.Niemann@linux.org
-s3_test:
- movw $0x0f35, %cx # we store some constants in cl/ch
- movw $0x03d4, %dx
- movb $0x38, %al
- call inidx
- movb %al, %bh # store current CRT-register 0x38
- movw $0x0038, %ax
- call outidx # disable writing to special regs
- movb %cl, %al # check whether we can write special reg 0x35
- call inidx
- movb %al, %bl # save the current value of CRT reg 0x35
- andb $0xf0, %al # clear bits 0-3
- movb %al, %ah
- movb %cl, %al # and write it to CRT reg 0x35
- call outidx
- call inidx # now read it back
- andb %ch, %al # clear the upper 4 bits
- jz s3_2 # the first test failed. But we have a
-
- movb %bl, %ah # second chance
- movb %cl, %al
- call outidx
- jmp s3_1 # do the other tests
-
-s3_2: movw %cx, %ax # load ah with 0xf and al with 0x35
- orb %bl, %ah # set the upper 4 bits of ah with the orig value
- call outidx # write ...
- call inidx # ... and reread
- andb %cl, %al # turn off the upper 4 bits
- pushw %ax
- movb %bl, %ah # restore old value in register 0x35
- movb %cl, %al
- call outidx
- popw %ax
- cmpb %ch, %al # setting lower 4 bits was successful => bad
- je no_s3 # writing is allowed => this is not an S3
-
-s3_1: movw $0x4838, %ax # allow writing to special regs by putting
- call outidx # magic number into CRT-register 0x38
- movb %cl, %al # check whether we can write special reg 0x35
- call inidx
- movb %al, %bl
- andb $0xf0, %al
- movb %al, %ah
- movb %cl, %al
- call outidx
- call inidx
- andb %ch, %al
- jnz no_s3 # no, we can't write => no S3
-
- movw %cx, %ax
- orb %bl, %ah
- call outidx
- call inidx
- andb %ch, %al
- pushw %ax
- movb %bl, %ah # restore old value in register 0x35
- movb %cl, %al
- call outidx
- popw %ax
- cmpb %ch, %al
- jne no_s31 # writing not possible => no S3
- movb $0x30, %al
- call inidx # now get the S3 id ...
- leaw idS3, %di
- movw $0x10, %cx
- repne
- scasb
- je no_s31
-
- movb %bh, %ah
- movb $0x38, %al
- jmp s3rest
-
-no_s3: movb $0x35, %al # restore CRT register 0x35
- movb %bl, %ah
- call outidx
-no_s31: xorw %bp, %bp # Detection failed
-s3rest: movb %bh, %ah
- movb $0x38, %al # restore old value of CRT register 0x38
- jmp outidx
-
-idS3: .byte 0x81, 0x82, 0x90, 0x91, 0x92, 0x93, 0x94, 0x95
- .byte 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa8, 0xb0
-
-s3_md: .byte 0x54, 0x2b, 0x84
- .byte 0x55, 0x19, 0x84
- .byte 0
- .ascii "S3"
- .byte 0
-
-# ATI cards.
-ati_test:
- leaw idati, %si
- movw $0x31, %di
- movw $0x09, %cx
- repe
- cmpsb
- je atiok
-
- xorw %bp, %bp
-atiok: ret
-
-idati: .ascii "761295520"
-
-ati_md: .byte 0x23, 0x19, 0x84
- .byte 0x33, 0x2c, 0x84
- .byte 0x22, 0x1e, 0x64
- .byte 0x21, 0x19, 0x64
- .byte 0x58, 0x21, 0x50
- .byte 0x5b, 0x1e, 0x50
- .byte 0
- .ascii "ATI"
- .byte 0
-
-# AHEAD
-ahead_test:
- movw $0x200f, %ax
- movw $0x3ce, %dx
- outw %ax, %dx
- incw %dx
- inb %dx, %al
- cmpb $0x20, %al
- je isahed
-
- cmpb $0x21, %al
- je isahed
-
- xorw %bp, %bp
-isahed: ret
-
-ahead_md:
- .byte 0x22, 0x2c, 0x84
- .byte 0x23, 0x19, 0x84
- .byte 0x24, 0x1c, 0x84
- .byte 0x2f, 0x32, 0xa0
- .byte 0x32, 0x22, 0x50
- .byte 0x34, 0x42, 0x50
- .byte 0
- .ascii "Ahead"
- .byte 0
-
-# Chips & Tech.
-chips_test:
- movw $0x3c3, %dx
- inb %dx, %al
- orb $0x10, %al
- outb %al, %dx
- movw $0x104, %dx
- inb %dx, %al
- movb %al, %bl
- movw $0x3c3, %dx
- inb %dx, %al
- andb $0xef, %al
- outb %al, %dx
- cmpb $0xa5, %bl
- je cantok
-
- xorw %bp, %bp
-cantok: ret
-
-chips_md:
- .byte 0x60, 0x19, 0x84
- .byte 0x61, 0x32, 0x84
- .byte 0
- .ascii "Chips & Technologies"
- .byte 0
-
-# Cirrus Logic 5X0
-cirrus1_test:
- movw $0x3d4, %dx
- movb $0x0c, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- movb %al, %bl
- xorb %al, %al
- outb %al, %dx
- decw %dx
- movb $0x1f, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- movb %al, %bh
- xorb %ah, %ah
- shlb $4, %al
- movw %ax, %cx
- movb %bh, %al
- shrb $4, %al
- addw %ax, %cx
- shlw $8, %cx
- addw $6, %cx
- movw %cx, %ax
- movw $0x3c4, %dx
- outw %ax, %dx
- incw %dx
- inb %dx, %al
- andb %al, %al
- jnz nocirr
-
- movb %bh, %al
- outb %al, %dx
- inb %dx, %al
- cmpb $0x01, %al
- je iscirr
-
-nocirr: xorw %bp, %bp
-iscirr: movw $0x3d4, %dx
- movb %bl, %al
- xorb %ah, %ah
- shlw $8, %ax
- addw $0x0c, %ax
- outw %ax, %dx
- ret
-
-cirrus1_md:
- .byte 0x1f, 0x19, 0x84
- .byte 0x20, 0x2c, 0x84
- .byte 0x22, 0x1e, 0x84
- .byte 0x31, 0x25, 0x64
- .byte 0
- .ascii "Cirrus Logic 5X0"
- .byte 0
-
-# Cirrus Logic 54XX
-cirrus5_test:
- movw $0x3c4, %dx
- movb $6, %al
- call inidx
- movb %al, %bl # BL=backup
- movw $6, %ax
- call tstidx
- cmpb $0x0f, %al
- jne c5fail
-
- movw $0x1206, %ax
- call tstidx
- cmpb $0x12, %al
- jne c5fail
-
- movb $0x1e, %al
- call inidx
- movb %al, %bh
- movb %bh, %ah
- andb $0xc0, %ah
- movb $0x1e, %al
- call tstidx
- andb $0x3f, %al
- jne c5xx
-
- movb $0x1e, %al
- movb %bh, %ah
- orb $0x3f, %ah
- call tstidx
- xorb $0x3f, %al
- andb $0x3f, %al
-c5xx: pushf
- movb $0x1e, %al
- movb %bh, %ah
- outw %ax, %dx
- popf
- je c5done
-
-c5fail: xorw %bp, %bp
-c5done: movb $6, %al
- movb %bl, %ah
- outw %ax, %dx
- ret
-
-cirrus5_md:
- .byte 0x14, 0x19, 0x84
- .byte 0x54, 0x2b, 0x84
- .byte 0
- .ascii "Cirrus Logic 54XX"
- .byte 0
-
-# Cirrus Logic 64XX -- no known extra modes, but must be identified, because
-# it's misidentified by the Ahead test.
-cirrus6_test:
- movw $0x3ce, %dx
- movb $0x0a, %al
- call inidx
- movb %al, %bl # BL=backup
- movw $0xce0a, %ax
- call tstidx
- orb %al, %al
- jne c2fail
-
- movw $0xec0a, %ax
- call tstidx
- cmpb $0x01, %al
- jne c2fail
-
- movb $0xaa, %al
- call inidx # 4X, 5X, 7X and 8X are valid 64XX chip ID's.
- shrb $4, %al
- subb $4, %al
- jz c6done
-
- decb %al
- jz c6done
-
- subb $2, %al
- jz c6done
-
- decb %al
- jz c6done
-
-c2fail: xorw %bp, %bp
-c6done: movb $0x0a, %al
- movb %bl, %ah
- outw %ax, %dx
- ret
-
-cirrus6_md:
- .byte 0
- .ascii "Cirrus Logic 64XX"
- .byte 0
-
-# Everex / Trident
-everex_test:
- movw $0x7000, %ax
- xorw %bx, %bx
- int $0x10
- cmpb $0x70, %al
- jne noevrx
-
- shrw $4, %dx
- cmpw $0x678, %dx
- je evtrid
-
- cmpw $0x236, %dx
- jne evrxok
-
-evtrid: leaw trident_md, %bp
-evrxok: ret
-
-noevrx: xorw %bp, %bp
- ret
-
-everex_md:
- .byte 0x03, 0x22, 0x50
- .byte 0x04, 0x3c, 0x50
- .byte 0x07, 0x2b, 0x64
- .byte 0x08, 0x4b, 0x64
- .byte 0x0a, 0x19, 0x84
- .byte 0x0b, 0x2c, 0x84
- .byte 0x16, 0x1e, 0x50
- .byte 0x18, 0x1b, 0x64
- .byte 0x21, 0x40, 0xa0
- .byte 0x40, 0x1e, 0x84
- .byte 0
- .ascii "Everex/Trident"
- .byte 0
-
-# Genoa.
-genoa_test:
- leaw idgenoa, %si # Check Genoa 'clues'
- xorw %ax, %ax
- movb %es:(0x37), %al
- movw %ax, %di
- movw $0x04, %cx
- decw %si
- decw %di
-l1: incw %si
- incw %di
- movb (%si), %al
- testb %al, %al
- jz l2
-
- cmpb %es:(%di), %al
-l2: loope l1
- orw %cx, %cx
- je isgen
-
- xorw %bp, %bp
-isgen: ret
-
-idgenoa: .byte 0x77, 0x00, 0x99, 0x66
-
-genoa_md:
- .byte 0x58, 0x20, 0x50
- .byte 0x5a, 0x2a, 0x64
- .byte 0x60, 0x19, 0x84
- .byte 0x61, 0x1d, 0x84
- .byte 0x62, 0x20, 0x84
- .byte 0x63, 0x2c, 0x84
- .byte 0x64, 0x3c, 0x84
- .byte 0x6b, 0x4f, 0x64
- .byte 0x72, 0x3c, 0x50
- .byte 0x74, 0x42, 0x50
- .byte 0x78, 0x4b, 0x64
- .byte 0
- .ascii "Genoa"
- .byte 0
-
-# OAK
-oak_test:
- leaw idoakvga, %si
- movw $0x08, %di
- movw $0x08, %cx
- repe
- cmpsb
- je isoak
-
- xorw %bp, %bp
-isoak: ret
-
-idoakvga: .ascii "OAK VGA "
-
-oak_md: .byte 0x4e, 0x3c, 0x50
- .byte 0x4f, 0x3c, 0x84
- .byte 0x50, 0x19, 0x84
- .byte 0x51, 0x2b, 0x84
- .byte 0
- .ascii "OAK"
- .byte 0
-
-# WD Paradise.
-paradise_test:
- leaw idparadise, %si
- movw $0x7d, %di
- movw $0x04, %cx
- repe
- cmpsb
- je ispara
-
- xorw %bp, %bp
-ispara: ret
-
-idparadise: .ascii "VGA="
-
-paradise_md:
- .byte 0x41, 0x22, 0x50
- .byte 0x47, 0x1c, 0x84
- .byte 0x55, 0x19, 0x84
- .byte 0x54, 0x2c, 0x84
- .byte 0
- .ascii "Paradise"
- .byte 0
-
-# Trident.
-trident_test:
- movw $0x3c4, %dx
- movb $0x0e, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- xchgb %al, %ah
- xorb %al, %al
- outb %al, %dx
- inb %dx, %al
- xchgb %ah, %al
- movb %al, %bl # Strange thing ... in the book this wasn't
- andb $0x02, %bl # necessary but it worked on my card which
- jz setb2 # is a trident. Without it the screen goes
- # blurred ...
- andb $0xfd, %al
- jmp clrb2
-
-setb2: orb $0x02, %al
-clrb2: outb %al, %dx
- andb $0x0f, %ah
- cmpb $0x02, %ah
- je istrid
-
- xorw %bp, %bp
-istrid: ret
-
-trident_md:
- .byte 0x50, 0x1e, 0x50
- .byte 0x51, 0x2b, 0x50
- .byte 0x52, 0x3c, 0x50
- .byte 0x57, 0x19, 0x84
- .byte 0x58, 0x1e, 0x84
- .byte 0x59, 0x2b, 0x84
- .byte 0x5a, 0x3c, 0x84
- .byte 0
- .ascii "Trident"
- .byte 0
-
-# Tseng.
-tseng_test:
- movw $0x3cd, %dx
- inb %dx, %al # Could things be this simple ! :-)
- movb %al, %bl
- movb $0x55, %al
- outb %al, %dx
- inb %dx, %al
- movb %al, %ah
- movb %bl, %al
- outb %al, %dx
- cmpb $0x55, %ah
- je istsen
-
-isnot: xorw %bp, %bp
-istsen: ret
-
-tseng_md:
- .byte 0x26, 0x3c, 0x50
- .byte 0x2a, 0x28, 0x64
- .byte 0x23, 0x19, 0x84
- .byte 0x24, 0x1c, 0x84
- .byte 0x22, 0x2c, 0x84
- .byte 0x21, 0x3c, 0x84
- .byte 0
- .ascii "Tseng"
- .byte 0
-
-# Video7.
-video7_test:
- movw $0x3cc, %dx
- inb %dx, %al
- movw $0x3b4, %dx
- andb $0x01, %al
- jz even7
-
- movw $0x3d4, %dx
-even7: movb $0x0c, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- movb %al, %bl
- movb $0x55, %al
- outb %al, %dx
- inb %dx, %al
- decw %dx
- movb $0x1f, %al
- outb %al, %dx
- incw %dx
- inb %dx, %al
- movb %al, %bh
- decw %dx
- movb $0x0c, %al
- outb %al, %dx
- incw %dx
- movb %bl, %al
- outb %al, %dx
- movb $0x55, %al
- xorb $0xea, %al
- cmpb %bh, %al
- jne isnot
-
- movb $VIDEO_FIRST_V7>>8, svga_prefix # Use special mode switching
- ret
-
-video7_md:
- .byte 0x40, 0x2b, 0x50
- .byte 0x43, 0x3c, 0x50
- .byte 0x44, 0x3c, 0x64
- .byte 0x41, 0x19, 0x84
- .byte 0x42, 0x2c, 0x84
- .byte 0x45, 0x1c, 0x84
- .byte 0
- .ascii "Video 7"
- .byte 0
-
-# Realtek VGA
-realtek_test:
- leaw idrtvga, %si
- movw $0x45, %di
- movw $0x0b, %cx
- repe
- cmpsb
- je isrt
-
- xorw %bp, %bp
-isrt: ret
-
-idrtvga: .ascii "REALTEK VGA"
-
-realtek_md:
- .byte 0x1a, 0x3c, 0x50
- .byte 0x1b, 0x19, 0x84
- .byte 0x1c, 0x1e, 0x84
- .byte 0x1d, 0x2b, 0x84
- .byte 0x1e, 0x3c, 0x84
- .byte 0
- .ascii "REALTEK"
- .byte 0
-
-#endif /* CONFIG_VIDEO_SVGA */
-
-# User-defined local mode table (VGA only)
-#ifdef CONFIG_VIDEO_LOCAL
-local_modes:
- leaw local_mode_table, %si
-locm1: lodsw
- orw %ax, %ax
- jz locm2
-
- stosw
- movsw
- jmp locm1
-
-locm2: ret
-
-# This is the table of local video modes which can be supplied manually
-# by the user. Each entry consists of mode ID (word) and dimensions
-# (byte for column count and another byte for row count). These modes
-# are placed before all SVGA and VESA modes and override them if table
-# compacting is enabled. The table must end with a zero word followed
-# by NUL-terminated video adapter name.
-local_mode_table:
- .word 0x0100 # Example: 40x25
- .byte 25,40
- .word 0
- .ascii "Local"
- .byte 0
-#endif /* CONFIG_VIDEO_LOCAL */
-
-# Read a key and return the ASCII code in al, scan code in ah
-getkey: xorb %ah, %ah
- int $0x16
- ret
-
-# Read a key with a timeout of 30 seconds.
-# The hardware clock is used to get the time.
-getkt: call gettime
- addb $30, %al # Wait 30 seconds
- cmpb $60, %al
- jl lminute
-
- subb $60, %al
-lminute:
- movb %al, %cl
-again: movb $0x01, %ah
- int $0x16
- jnz getkey # key pressed, so get it
-
- call gettime
- cmpb %cl, %al
- jne again
-
- movb $0x20, %al # timeout, return `space'
- ret
-
-# Flush the keyboard buffer
-flush: movb $0x01, %ah
- int $0x16
- jz empty
-
- xorb %ah, %ah
- int $0x16
- jmp flush
-
-empty: ret
-
-# Print hexadecimal number.
-prthw: pushw %ax
- movb %ah, %al
- call prthb
- popw %ax
-prthb: pushw %ax
- shrb $4, %al
- call prthn
- popw %ax
- andb $0x0f, %al
-prthn: cmpb $0x0a, %al
- jc prth1
-
- addb $0x07, %al
-prth1: addb $0x30, %al
- jmp prtchr
-
-# Print decimal number in al
-prtdec: pushw %ax
- pushw %cx
- xorb %ah, %ah
- movb $0x0a, %cl
- idivb %cl
- cmpb $0x09, %al
- jbe lt100
-
- call prtdec
- jmp skip10
-
-lt100: addb $0x30, %al
- call prtchr
-skip10: movb %ah, %al
- addb $0x30, %al
- call prtchr
- popw %cx
- popw %ax
- ret
-
-store_edid:
-#ifdef CONFIG_FIRMWARE_EDID
- pushw %es # just save all registers
- pushw %ax
- pushw %bx
- pushw %cx
- pushw %dx
- pushw %di
-
- pushw %fs
- popw %es
-
- movl $0x13131313, %eax # memset block with 0x13
- movw $32, %cx
- movw $0x140, %di
- cld
- rep
- stosl
-
- cmpw $0x0200, vbe_version # only do EDID on >= VBE2.0
- jl no_edid
-
- pushw %es # save ES
- xorw %di, %di # Report Capability
- pushw %di
- popw %es # ES:DI must be 0:0
- movw $0x4f15, %ax
- xorw %bx, %bx
- xorw %cx, %cx
- int $0x10
- popw %es # restore ES
-
- cmpb $0x00, %ah # call successful
- jne no_edid
-
- cmpb $0x4f, %al # function supported
- jne no_edid
-
- movw $0x4f15, %ax # do VBE/DDC
- movw $0x01, %bx
- movw $0x00, %cx
- movw $0x00, %dx
- movw $0x140, %di
- int $0x10
-
-no_edid:
- popw %di # restore all registers
- popw %dx
- popw %cx
- popw %bx
- popw %ax
- popw %es
-#endif
- ret
-
-# VIDEO_SELECT-only variables
-mt_end: .word 0 # End of video mode table if built
-edit_buf: .space 6 # Line editor buffer
-card_name: .word 0 # Pointer to adapter name
-scanning: .byte 0 # Performing mode scan
-do_restore: .byte 0 # Screen contents altered during mode change
-svga_prefix: .byte VIDEO_FIRST_BIOS>>8 # Default prefix for BIOS modes
-graphic_mode: .byte 0 # Graphic mode with a linear frame buffer
-dac_size: .byte 6 # DAC bit depth
-vbe_version: .word 0 # VBE bios version
-
-# Status messages
-keymsg: .ascii "Press <RETURN> to see video modes available, "
- .ascii "<SPACE> to continue or wait 30 secs"
- .byte 0x0d, 0x0a, 0
-
-listhdr: .byte 0x0d, 0x0a
- .ascii "Mode: COLSxROWS:"
-
-crlft: .byte 0x0d, 0x0a, 0
-
-prompt: .byte 0x0d, 0x0a
- .asciz "Enter mode number or `scan': "
-
-unknt: .asciz "Unknown mode ID. Try again."
-
-badmdt: .ascii "You passed an undefined mode number."
- .byte 0x0d, 0x0a, 0
-
-vesaer: .ascii "Error: Scanning of VESA modes failed. Please "
- .ascii "report to <mj@ucw.cz>."
- .byte 0x0d, 0x0a, 0
-
-old_name: .asciz "CGA/MDA/HGA"
-
-ega_name: .asciz "EGA"
-
-svga_name: .ascii " "
-
-vga_name: .asciz "VGA"
-
-vesa_name: .asciz "VESA"
-
-name_bann: .asciz "Video adapter: "
-#endif /* CONFIG_VIDEO_SELECT */
-
-# Other variables:
-adapter: .byte 0 # Video adapter: 0=CGA/MDA/HGA,1=EGA,2=VGA
-video_segment: .word 0xb800 # Video memory segment
-force_size: .word 0 # Use this size instead of the one in BIOS vars
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/video.c
+ *
+ * Select video mode
+ */
+
+#include "boot.h"
+#include "video.h"
+#include "vesa.h"
+
+/*
+ * Mode list variables
+ */
+static struct card_info cards[]; /* List of cards to probe for */
+
+/*
+ * Common variables
+ */
+int adapter; /* 0=CGA/MDA/HGC, 1=EGA, 2=VGA+ */
+u16 video_segment;
+int force_x, force_y; /* Don't query the BIOS for cols/rows */
+
+int do_restore = 0; /* Screen contents changed during mode flip */
+int graphic_mode; /* Graphic mode with linear frame buffer */
+
+static void store_cursor_position(void)
+{
+ u16 curpos;
+ u16 ax, bx;
+
+ ax = 0x0300;
+ bx = 0;
+ asm(INT10
+ : "=d" (curpos), "+a" (ax), "+b" (bx)
+ : : "ecx", "esi", "edi");
+
+ boot_params.screen_info.orig_x = curpos;
+ boot_params.screen_info.orig_y = curpos >> 8;
+}
+
+static void store_video_mode(void)
+{
+ u16 ax, page;
+
+ /* N.B.: the saving of the video page here is a bit silly,
+ since we pretty much assume page 0 everywhere. */
+ ax = 0x0f00;
+ asm(INT10
+ : "+a" (ax), "=b" (page)
+ : : "ecx", "edx", "esi", "edi");
+
+ /* Not all BIOSes are clean with respect to the top bit */
+ boot_params.screen_info.orig_video_mode = ax & 0x7f;
+ boot_params.screen_info.orig_video_page = page;
+}
+
+/*
+ * Store the video mode parameters for later usage by the kernel.
+ * This is done by asking the BIOS except for the rows/columns
+ * parameters in the default 80x25 mode -- these are set directly,
+ * because some very obscure BIOSes supply insane values.
+ */
+static void store_mode_params(void)
+{
+ u16 font_size;
+ int x, y;
+
+ /* For graphics mode, it is up to the mode-setting driver
+ (currently only video-vesa.c) to store the parameters */
+ if (graphic_mode)
+ return;
+
+ store_cursor_position();
+ store_video_mode();
+
+ if (boot_params.screen_info.orig_video_mode == 0x07) {
+ /* MDA, HGC, or VGA in monochrome mode */
+ video_segment = 0xb000;
+ } else {
+ /* CGA, EGA, VGA and so forth */
+ video_segment = 0xb800;
+ }
+
+ set_fs(0);
+ font_size = rdfs16(0x485); /* Font size, BIOS area */
+ boot_params.screen_info.orig_video_points = font_size;
+
+ x = rdfs16(0x44a);
+ y = (adapter == ADAPTER_CGA) ? 25 : rdfs8(0x484)+1;
+
+ if (force_x)
+ x = force_x;
+ if (force_y)
+ y = force_y;
+
+ boot_params.screen_info.orig_video_cols = x;
+ boot_params.screen_info.orig_video_lines = y;
+}
+
+/* Probe the video drivers and have them generate their mode lists. */
+static void probe_cards(int unsafe)
+{
+ struct card_info *card;
+ static u8 probed[2];
+
+ if (probed[unsafe])
+ return;
+
+ probed[unsafe] = 1;
+
+ for (card = video_cards; card < video_cards_end; card++) {
+ if (card->unsafe == unsafe) {
+ if (card->probe)
+ card->nmodes = card->probe();
+ else
+ card->nmodes = 0;
+ }
+ }
+}
+
+/* Test if a mode is defined */
+int mode_defined(u16 mode)
+{
+ struct card_info *card;
+ struct mode_info *mi;
+ int i;
+
+ for (card = video_cards; card < video_cards_end; card++) {
+ mi = card->modes;
+ for (i = 0; i < card->nmodes; i++, mi++) {
+ if (mi->mode == mode)
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+/* Set mode (without recalc) */
+static int raw_set_mode(u16 mode)
+{
+ int nmode, i;
+ struct card_info *card;
+ struct mode_info *mi;
+
+ /* Drop the recalc bit if set */
+ mode &= ~VIDEO_RECALC;
+
+ /* Scan for mode based on fixed ID, position, or resolution */
+ nmode = 0;
+ for (card = video_cards; card < video_cards_end; card++) {
+ mi = card->modes;
+ for (i = 0; i < card->nmodes; i++, mi++) {
+ int visible = mi->x || mi->y;
+
+ if ((mode == nmode && visible) ||
+ mode == mi->mode ||
+ mode == (mi->y << 8)+mi->x)
+ return card->set_mode(mi);
+
+ if (visible)
+ nmode++;
+ }
+ }
+
+ /* Nothing found? Is it an "exceptional" (unprobed) mode? */
+ for (card = video_cards; card < video_cards_end; card++) {
+ if (mode >= card->xmode_first &&
+ mode < card->xmode_first+card->xmode_n) {
+ struct mode_info mix;
+ mix.mode = mode;
+ mix.x = mix.y = 0;
+ return card->set_mode(&mix);
+ }
+ }
+
+ /* Otherwise, failure... */
+ return -1;
+}
+
+/*
+ * Recalculate the vertical video cutoff (hack!)
+ */
+static void vga_recalc_vertical(void)
+{
+ unsigned int font_size, rows;
+ u16 crtc;
+ u8 ov;
+
+ set_fs(0);
+ font_size = rdfs8(0x485); /* BIOS: font size (pixels) */
+ rows = force_y ? force_y : rdfs8(0x484)+1; /* Text rows */
+
+ rows *= font_size; /* Visible scan lines */
+ rows--; /* ... minus one */
+
+ crtc = vga_crtc();
+
+ out_idx((u8)rows, crtc, 0x12); /* Lower height register */
+ ov = in_idx(crtc, 0x07); /* Overflow register */
+ ov &= 0xbd;
+ ov |= (rows >> (8-1)) & 0x02;
+ ov |= (rows >> (9-6)) & 0x40;
+ out_idx(ov, crtc, 0x07);
+}
+
+/* Set mode (with recalc if specified) */
+static int set_mode(u16 mode)
+{
+ int rv;
+
+ /* Very special mode numbers... */
+ if (mode == VIDEO_CURRENT_MODE)
+ return 0; /* Nothing to do... */
+ else if (mode == NORMAL_VGA)
+ mode = VIDEO_80x25;
+ else if (mode == EXTENDED_VGA)
+ mode = VIDEO_8POINT;
+
+ rv = raw_set_mode(mode);
+ if (rv)
+ return rv;
+
+ if (mode & VIDEO_RECALC)
+ vga_recalc_vertical();
+
+ return 0;
+}
+
+static unsigned int get_entry(void)
+{
+ char entry_buf[4];
+ int i, len = 0;
+ int key;
+ unsigned int v;
+
+ do {
+ key = getchar();
+
+ if (key == '\b') {
+ if (len > 0) {
+ puts("\b \b");
+ len--;
+ }
+ } else if ((key >= '0' && key <= '9') ||
+ (key >= 'A' && key <= 'Z') ||
+ (key >= 'a' && key <= 'z')) {
+ if (len < sizeof entry_buf) {
+ entry_buf[len++] = key;
+ putchar(key);
+ }
+ }
+ } while (key != '\r');
+ putchar('\n');
+
+ if (len == 0)
+ return VIDEO_CURRENT_MODE; /* Default */
+
+ v = 0;
+ for (i = 0; i < len; i++) {
+ v <<= 4;
+ key = entry_buf[i] | 0x20;
+ v += (key > '9') ? key-'a'+10 : key-'0';
+ }
+
+ return v;
+}
+
+static void display_menu(void)
+{
+ struct card_info *card;
+ struct mode_info *mi;
+ char ch;
+ int i;
+
+ puts("Mode: COLSxROWS:\n");
+
+ ch = '0';
+ for (card = video_cards; card < video_cards_end; card++) {
+ mi = card->modes;
+ for (i = 0; i < card->nmodes; i++, mi++) {
+ int visible = mi->x && mi->y;
+ u16 mode_id = mi->mode ? mi->mode :
+ (mi->y << 8)+mi->x;
+
+ if (!visible)
+ continue; /* Hidden mode */
+
+ printf("%c %04X %3dx%-3d %s\n",
+ ch, mode_id, mi->x, mi->y, card->card_name);
+
+ if (ch == '9')
+ ch = 'a';
+ else if (ch == 'z' || ch == ' ')
+ ch = ' '; /* Out of keys... */
+ else
+ ch++;
+ }
+ }
+}
+
+#define H(x) ((x)-'a'+10)
+#define SCAN ((H('s')<<12)+(H('c')<<8)+(H('a')<<4)+H('n'))
+
+static unsigned int mode_menu(void)
+{
+ int key;
+ unsigned int sel;
+
+ puts("Press <ENTER> to see video modes available, "
+ "<SPACE> to continue, or wait 30 sec\n");
+
+ kbd_flush();
+ while (1) {
+ key = getchar_timeout();
+ if (key == ' ' || key == 0)
+ return VIDEO_CURRENT_MODE; /* Default */
+ if (key == '\r')
+ break;
+ putchar('\a'); /* Beep! */
+ }
+
+
+ for (;;) {
+ display_menu();
+
+ puts("Enter a video mode or \"scan\" to scan for "
+ "additional modes: ");
+ sel = get_entry();
+ if (sel != SCAN)
+ return sel;
+
+ probe_cards(1);
+ }
+}
+
+#ifdef CONFIG_VIDEO_RETAIN
+/* Save screen content to the heap */
+struct saved_screen {
+ int x, y;
+ int curx, cury;
+ u16 *data;
+} saved;
+
+static void save_screen(void)
+{
+ /* Should be called after store_mode_params() */
+ saved.x = boot_params.screen_info.orig_video_cols;
+ saved.y = boot_params.screen_info.orig_video_lines;
+ saved.curx = boot_params.screen_info.orig_x;
+ saved.cury = boot_params.screen_info.orig_y;
+
+ if (heap_free() < saved.x*saved.y*sizeof(u16)+512)
+ return; /* Not enough heap to save the screen */
+
+ saved.data = GET_HEAP(u16, saved.x*saved.y);
+
+ set_fs(video_segment);
+ copy_from_fs(saved.data, 0, saved.x*saved.y*sizeof(u16));
+}
+
+static void restore_screen(void)
+{
+ /* Should be called after store_mode_params() */
+ int xs = boot_params.screen_info.orig_video_cols;
+ int ys = boot_params.screen_info.orig_video_lines;
+ int y;
+ addr_t dst = 0;
+ u16 *src = saved.data;
+ u16 ax, bx, dx;
+
+ if (graphic_mode)
+ return; /* Can't restore onto a graphic mode */
+
+ if (!src)
+ return; /* No saved screen contents */
+
+ /* Restore screen contents */
+
+ set_fs(video_segment);
+ for (y = 0; y < ys; y++) {
+ int npad;
+
+ if (y < saved.y) {
+ int copy = (xs < saved.x) ? xs : saved.x;
+ copy_to_fs(dst, src, copy*sizeof(u16));
+ dst += copy*sizeof(u16);
+ src += saved.x;
+ npad = (xs < saved.x) ? 0 : xs-saved.x;
+ } else {
+ npad = xs;
+ }
+
+ /* Writes "npad" blank characters to
+ video_segment:dst and advances dst */
+ asm volatile("pushw %%es ; "
+ "movw %2,%%es ; "
+ "shrw %%cx ; "
+ "jnc 1f ; "
+ "stosw \n\t"
+ "1: rep;stosl ; "
+ "popw %%es"
+ : "+D" (dst), "+c" (npad)
+ : "bdSm" (video_segment),
+ "a" (0x07200720));
+ }
+
+ /* Restore cursor position */
+ ax = 0x0200; /* Set cursor position */
+ bx = 0; /* Page number (<< 8) */
+ dx = (saved.cury << 8)+saved.curx;
+ asm volatile(INT10
+ : "+a" (ax), "+b" (bx), "+d" (dx)
+ : : "ecx", "esi", "edi");
+}
+#else
+#define save_screen() ((void)0)
+#define restore_screen() ((void)0)
+#endif
+
+void set_video(void)
+{
+ u16 mode = boot_params.hdr.vid_mode;
+
+ RESET_HEAP();
+
+ store_mode_params();
+ save_screen();
+ probe_cards(0);
+
+ for (;;) {
+ if (mode == ASK_VGA)
+ mode = mode_menu();
+
+ if (!set_mode(mode))
+ break;
+
+ printf("Undefined video mode number: %x\n", mode);
+ mode = ASK_VGA;
+ }
+ vesa_store_edid();
+ store_mode_params();
+
+ if (do_restore)
+ restore_screen();
+}
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/video.h
+ *
+ * Header file for the real-mode video probing code
+ */
+
+#ifndef BOOT_VIDEO_H
+#define BOOT_VIDEO_H
+
+#include <linux/types.h>
+
+/* Enable autodetection of SVGA adapters and modes. */
+#undef CONFIG_VIDEO_SVGA
+
+/* Enable autodetection of VESA modes */
+#define CONFIG_VIDEO_VESA
+
+/* Retain screen contents when switching modes */
+#define CONFIG_VIDEO_RETAIN
+
+/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */
+#undef CONFIG_VIDEO_400_HACK
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ * NORMAL_VGA (-1)
+ * EXTENDED_VGA (-2)
+ * ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+/* Special video modes */
+#define VIDEO_FIRST_SPECIAL 0x0f00
+#define VIDEO_80x25 0x0f00
+#define VIDEO_8POINT 0x0f01
+#define VIDEO_80x43 0x0f02
+#define VIDEO_80x28 0x0f03
+#define VIDEO_CURRENT_MODE 0x0f04
+#define VIDEO_80x30 0x0f05
+#define VIDEO_80x34 0x0f06
+#define VIDEO_80x60 0x0f07
+#define VIDEO_GFX_HACK 0x0f08
+#define VIDEO_LAST_SPECIAL 0x0f09
+
+/* Video modes given by resolution */
+#define VIDEO_FIRST_RESOLUTION 0x1000
+
+/* The "recalculate timings" flag */
+#define VIDEO_RECALC 0x8000
+
+/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */
+#ifdef CONFIG_VIDEO_RETAIN
+void store_screen(void);
+#define DO_STORE() store_screen()
+#else
+#define DO_STORE() ((void)0)
+#endif /* CONFIG_VIDEO_RETAIN */
+
+/*
+ * Mode table structures
+ */
+
+struct mode_info {
+ u16 mode; /* Mode number (vga= style) */
+ u8 x, y; /* Width, height */
+};
+
+struct card_info {
+ const char *card_name;
+ int (*set_mode)(struct mode_info *mode);
+ int (*probe)(void);
+ struct mode_info *modes;
+ int nmodes; /* Number of probed modes so far */
+ int unsafe; /* Probing is unsafe, only do after "scan" */
+ u16 xmode_first; /* Unprobed modes to try to call anyway */
+ u16 xmode_n; /* Size of unprobed mode range */
+};
+
+#define __videocard struct card_info __attribute__((section(".videocards")))
+extern struct card_info video_cards[], video_cards_end[];
+
+int mode_defined(u16 mode); /* video.c */
+
+/* Basic video information */
+#define ADAPTER_CGA 0 /* CGA/MDA/HGC */
+#define ADAPTER_EGA 1
+#define ADAPTER_VGA 2
+
+extern int adapter;
+extern u16 video_segment;
+extern int force_x, force_y; /* Don't query the BIOS for cols/rows */
+extern int do_restore; /* Restore screen contents */
+extern int graphic_mode; /* Graphics mode with linear frame buffer */
+
+/*
+ * int $0x10 is notorious for touching registers it shouldn't.
+ * gcc doesn't like %ebp being clobbered, so define it as a push/pop
+ * sequence here.
+ */
+#define INT10 "pushl %%ebp; int $0x10; popl %%ebp"
+
+/* Accessing VGA indexed registers */
+static inline u8 in_idx(u16 port, u8 index)
+{
+ outb(index, port);
+ return inb(port+1);
+}
+
+static inline void out_idx(u8 v, u16 port, u8 index)
+{
+ outw(index+(v << 8), port);
+}
+
+/* Writes a value to an indexed port and then reads the port again */
+static inline u8 tst_idx(u8 v, u16 port, u8 index)
+{
+ out_idx(port, index, v);
+ return in_idx(port, index);
+}
+
+/* Get the I/O port of the VGA CRTC */
+u16 vga_crtc(void); /* video-vga.c */
+
+#endif /* BOOT_VIDEO_H */
--- /dev/null
+/* -*- linux-c -*- ------------------------------------------------------- *
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright 2007 rPath, Inc. - All Rights Reserved
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * arch/i386/boot/voyager.c
+ *
+ * Get the Voyager config information
+ */
+
+#include "boot.h"
+
+#ifdef CONFIG_X86_VOYAGER
+
+int query_voyager(void)
+{
+ u8 err;
+ u16 es, di;
+ /* Abuse the apm_bios_info area for this */
+ u8 *data_ptr = (u8 *)&boot_params.apm_bios_info;
+
+ data_ptr[0] = 0xff; /* Flag on config not found(?) */
+
+ asm("pushw %%es ; "
+ "int $0x15 ; "
+ "setc %0 ; "
+ "movw %%es, %1 ; "
+ "popw %%es"
+ : "=qm" (err), "=rm" (es), "=D" (di)
+ : "a" (0xffc0));
+
+ if (err)
+ return -1; /* Not Voyager */
+
+ set_fs(es);
+ copy_from_fs(data_ptr, di, 7); /* Table is 7 bytes apparently */
+ return 0;
+}
+
+#endif /* CONFIG_X86_VOYAGER */
obj-y += cyrix.o
obj-y += centaur.o
obj-y += transmeta.o
-obj-y += intel.o intel_cacheinfo.o
+obj-y += intel.o intel_cacheinfo.o addon_cpuid_features.o
obj-y += rise.o
obj-y += nexgen.o
obj-y += umc.o
--- /dev/null
+
+/*
+ * Routines to indentify additional cpu features that are scattered in
+ * cpuid space.
+ */
+
+#include <linux/cpu.h>
+
+#include <asm/processor.h>
+
+struct cpuid_bit {
+ u16 feature;
+ u8 reg;
+ u8 bit;
+ u32 level;
+};
+
+enum cpuid_regs {
+ CR_EAX = 0,
+ CR_ECX,
+ CR_EDX,
+ CR_EBX
+};
+
+void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
+{
+ u32 max_level;
+ u32 regs[4];
+ const struct cpuid_bit *cb;
+
+ static const struct cpuid_bit cpuid_bits[] = {
+ { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 },
+ { 0, 0, 0, 0 }
+ };
+
+ for (cb = cpuid_bits; cb->feature; cb++) {
+
+ /* Verify that the level is valid */
+ max_level = cpuid_eax(cb->level & 0xffff0000);
+ if (max_level < cb->level ||
+ max_level > (cb->level | 0xffff))
+ continue;
+
+ cpuid(cb->level, ®s[CR_EAX], ®s[CR_EBX],
+ ®s[CR_ECX], ®s[CR_EDX]);
+
+ if (regs[cb->reg] & (1 << cb->bit))
+ set_bit(cb->feature, c->x86_capability);
+ }
+}
if ( xlvl >= 0x80000004 )
get_model_name(c); /* Default name */
}
+
+ init_scattered_cpuid_features(c);
}
early_intel_workaround(c);
If in doubt, say N.
config X86_POWERNOW_K8_ACPI
- bool
- depends on X86_POWERNOW_K8 && ACPI_PROCESSOR
- depends on !(X86_POWERNOW_K8 = y && ACPI_PROCESSOR = m)
+ bool "ACPI Support"
+ select ACPI_PROCESSOR
+ depends on X86_POWERNOW_K8
default y
+ help
+ This provides access to the K8s Processor Performance States via ACPI.
+ This driver is probably required for CPUFreq to work with multi-socket and
+ SMP systems. It is not required on at least some single-socket yet
+ multi-core systems, even if SMP is enabled.
+
+ It is safe to say Y here.
config X86_GX_SUSPMOD
tristate "Cyrix MediaGX/NatSemi Geode Suspend Modulation"
static void do_drv_write(struct drv_cmd *cmd)
{
- u32 h = 0;
+ u32 lo, hi;
switch (cmd->type) {
case SYSTEM_INTEL_MSR_CAPABLE:
- wrmsr(cmd->addr.msr.reg, cmd->val, h);
+ rdmsr(cmd->addr.msr.reg, lo, hi);
+ lo = (lo & ~INTEL_MSR_RANGE) | (cmd->val & INTEL_MSR_RANGE);
+ wrmsr(cmd->addr.msr.reg, lo, hi);
break;
case SYSTEM_IO_CAPABLE:
acpi_os_write_port((acpi_io_address)cmd->addr.io.port,
struct cpufreq_freqs freqs;
cpumask_t online_policy_cpus;
struct drv_cmd cmd;
- unsigned int msr;
unsigned int next_state = 0; /* Index into freq_table */
unsigned int next_perf_state = 0; /* Index into perf table */
unsigned int i;
case SYSTEM_INTEL_MSR_CAPABLE:
cmd.type = SYSTEM_INTEL_MSR_CAPABLE;
cmd.addr.msr.reg = MSR_IA32_PERF_CTL;
- msr =
- (u32) perf->states[next_perf_state].
- control & INTEL_MSR_RANGE;
- cmd.val = get_cur_val(online_policy_cpus);
- cmd.val = (cmd.val & ~INTEL_MSR_RANGE) | msr;
+ cmd.val = (u32) perf->states[next_perf_state].control;
break;
case SYSTEM_IO_CAPABLE:
cmd.type = SYSTEM_IO_CAPABLE;
*/
static unsigned int nforce2_detect_chipset(void)
{
- u8 revision;
-
nforce2_chipset_dev = pci_get_subsys(PCI_VENDOR_ID_NVIDIA,
PCI_DEVICE_ID_NVIDIA_NFORCE2,
PCI_ANY_ID, PCI_ANY_ID, NULL);
if (nforce2_chipset_dev == NULL)
return -ENODEV;
- pci_read_config_byte(nforce2_chipset_dev, PCI_REVISION_ID, &revision);
-
printk(KERN_INFO "cpufreq: Detected nForce2 chipset revision %X\n",
- revision);
+ nforce2_chipset_dev->revision);
printk(KERN_INFO
"cpufreq: FSB changing is maybe unstable and can lead to crashes and data loss.\n");
u8 pci_suscfg;
u8 pci_pmer1;
u8 pci_pmer2;
- u8 pci_rev;
struct pci_dev *cs55x0;
};
pci_write_config_byte(gx_params->cs55x0, PCI_VIDTC, 100);/* typical 50 to 100ms */
pci_write_config_byte(gx_params->cs55x0, PCI_PMER1, pmer1);
- if (gx_params->pci_rev < 0x10) { /* CS5530(rev 1.2, 1.3) */
+ if (gx_params->cs55x0->revision < 0x10) { /* CS5530(rev 1.2, 1.3) */
suscfg = gx_params->pci_suscfg | SUSMOD;
} else { /* CS5530A,B.. */
suscfg = gx_params->pci_suscfg | SUSMOD | PWRSVE;
pci_read_config_byte(params->cs55x0, PCI_PMER2, &(params->pci_pmer2));
pci_read_config_byte(params->cs55x0, PCI_MODON, &(params->on_duration));
pci_read_config_byte(params->cs55x0, PCI_MODOFF, &(params->off_duration));
- pci_read_config_byte(params->cs55x0, PCI_REVISION_ID, ¶ms->pci_rev);
if ((ret = cpufreq_register_driver(&gx_suspmod_driver))) {
kfree(params);
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/string.h>
+#include <linux/delay.h>
#include <asm/msr.h>
#include <asm/timex.h>
/* Flags */
#define USE_ACPI_C3 (1 << 1)
#define USE_NORTHBRIDGE (1 << 2)
-#define USE_VT8235 (1 << 3)
static int cpu_model;
static unsigned int numscales=16;
static const struct mV_pos *vrm_mV_table;
static const unsigned char *mV_vrm_table;
-struct f_msr {
- u8 vrm;
- u8 pos;
-};
-static struct f_msr f_msr_table[32];
static unsigned int highest_speed, lowest_speed; /* kHz */
static unsigned int minmult, maxmult;
static int can_scale_voltage;
static struct acpi_processor *pr = NULL;
static struct acpi_processor_cx *cx = NULL;
+static u32 acpi_regs_addr;
static u8 longhaul_flags;
-static u8 longhaul_pos;
+static unsigned int longhaul_index;
/* Module parameters */
static int scale_voltage;
rdmsrl(MSR_VIA_BCR2, bcr2.val);
/* Enable software clock multiplier */
bcr2.bits.ESOFTBF = 1;
- bcr2.bits.CLOCKMUL = clock_ratio_index;
+ bcr2.bits.CLOCKMUL = clock_ratio_index & 0xff;
/* Sync to timer tick */
safe_halt();
/* For processor with Longhaul MSR */
-static void do_powersaver(int cx_address, unsigned int clock_ratio_index)
+static void do_powersaver(int cx_address, unsigned int clock_ratio_index,
+ unsigned int dir)
{
union msr_longhaul longhaul;
- u8 dest_pos;
u32 t;
- dest_pos = f_msr_table[clock_ratio_index].pos;
-
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Setup new frequency */
longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
/* Setup new voltage */
if (can_scale_voltage)
- longhaul.bits.SoftVID = f_msr_table[clock_ratio_index].vrm;
+ longhaul.bits.SoftVID = (clock_ratio_index >> 8) & 0x1f;
/* Sync to timer tick */
safe_halt();
/* Raise voltage if necessary */
- if (can_scale_voltage && longhaul_pos < dest_pos) {
+ if (can_scale_voltage && dir) {
longhaul.bits.EnableSoftVID = 1;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Change voltage */
}
longhaul.bits.EnableSoftVID = 0;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
- longhaul_pos = dest_pos;
}
/* Change frequency on next halt or sleep */
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Reduce voltage if necessary */
- if (can_scale_voltage && longhaul_pos > dest_pos) {
+ if (can_scale_voltage && !dir) {
longhaul.bits.EnableSoftVID = 1;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Change voltage */
}
longhaul.bits.EnableSoftVID = 0;
wrmsrl(MSR_VIA_LONGHAUL, longhaul.val);
- longhaul_pos = dest_pos;
}
}
* Sets a new clock ratio.
*/
-static void longhaul_setstate(unsigned int clock_ratio_index)
+static void longhaul_setstate(unsigned int table_index)
{
+ unsigned int clock_ratio_index;
int speed, mult;
struct cpufreq_freqs freqs;
- static unsigned int old_ratio=-1;
unsigned long flags;
unsigned int pic1_mask, pic2_mask;
+ u16 bm_status = 0;
+ u32 bm_timeout = 1000;
+ unsigned int dir = 0;
- if (old_ratio == clock_ratio_index)
- return;
- old_ratio = clock_ratio_index;
-
- mult = clock_ratio[clock_ratio_index];
+ clock_ratio_index = longhaul_table[table_index].index;
+ /* Safety precautions */
+ mult = clock_ratio[clock_ratio_index & 0x1f];
if (mult == -1)
return;
-
speed = calc_speed(mult);
if ((speed > highest_speed) || (speed < lowest_speed))
return;
+ /* Voltage transition before frequency transition? */
+ if (can_scale_voltage && longhaul_index < table_index)
+ dir = 1;
freqs.old = calc_speed(longhaul_get_cpu_mult());
freqs.new = speed;
outb(0xFF,0xA1); /* Overkill */
outb(0xFE,0x21); /* TMR0 only */
+ /* Wait while PCI bus is busy. */
+ if (acpi_regs_addr && (longhaul_flags & USE_NORTHBRIDGE
+ || ((pr != NULL) && pr->flags.bm_control))) {
+ bm_status = inw(acpi_regs_addr);
+ bm_status &= 1 << 4;
+ while (bm_status && bm_timeout) {
+ outw(1 << 4, acpi_regs_addr);
+ bm_timeout--;
+ bm_status = inw(acpi_regs_addr);
+ bm_status &= 1 << 4;
+ }
+ }
+
if (longhaul_flags & USE_NORTHBRIDGE) {
/* Disable AGP and PCI arbiters */
outb(3, 0x22);
} else if ((pr != NULL) && pr->flags.bm_control) {
- /* Disable bus master arbitration */
+ /* Disable bus master arbitration */
acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
}
switch (longhaul_version) {
if (longhaul_flags & USE_ACPI_C3) {
/* Don't allow wakeup */
acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
- do_powersaver(cx->address, clock_ratio_index);
+ do_powersaver(cx->address, clock_ratio_index, dir);
} else {
- do_powersaver(0, clock_ratio_index);
+ do_powersaver(0, clock_ratio_index, dir);
}
break;
}
freqs.new = calc_speed(longhaul_get_cpu_mult());
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ if (!bm_timeout)
+ printk(KERN_INFO PFX "Warning: Timeout while waiting for idle PCI bus.\n");
}
/*
static int __init longhaul_get_ranges(void)
{
- unsigned int j, k = 0;
+ unsigned int i, j, k = 0;
+ unsigned int ratio;
int mult;
/* Get current frequency */
if(!longhaul_table)
return -ENOMEM;
- for (j=0; j < numscales; j++) {
- unsigned int ratio;
+ for (j = 0; j < numscales; j++) {
ratio = clock_ratio[j];
if (ratio == -1)
continue;
longhaul_table[k].index = j;
k++;
}
+ if (k <= 1) {
+ kfree(longhaul_table);
+ return -ENODEV;
+ }
+ /* Sort */
+ for (j = 0; j < k - 1; j++) {
+ unsigned int min_f, min_i;
+ min_f = longhaul_table[j].frequency;
+ min_i = j;
+ for (i = j + 1; i < k; i++) {
+ if (longhaul_table[i].frequency < min_f) {
+ min_f = longhaul_table[i].frequency;
+ min_i = i;
+ }
+ }
+ if (min_i != j) {
+ unsigned int temp;
+ temp = longhaul_table[j].frequency;
+ longhaul_table[j].frequency = longhaul_table[min_i].frequency;
+ longhaul_table[min_i].frequency = temp;
+ temp = longhaul_table[j].index;
+ longhaul_table[j].index = longhaul_table[min_i].index;
+ longhaul_table[min_i].index = temp;
+ }
+ }
longhaul_table[k].frequency = CPUFREQ_TABLE_END;
- if (!k) {
- kfree (longhaul_table);
- return -EINVAL;
- }
+ /* Find index we are running on */
+ for (j = 0; j < k; j++) {
+ if (clock_ratio[longhaul_table[j].index & 0x1f] == mult) {
+ longhaul_index = j;
+ break;
+ }
+ }
return 0;
}
static void __init longhaul_setup_voltagescaling(void)
{
union msr_longhaul longhaul;
- struct mV_pos minvid, maxvid;
+ struct mV_pos minvid, maxvid, vid;
unsigned int j, speed, pos, kHz_step, numvscales;
int min_vid_speed;
}
if (!longhaul.bits.VRMRev) {
- printk (KERN_INFO PFX "VRM 8.5\n");
+ printk(KERN_INFO PFX "VRM 8.5\n");
vrm_mV_table = &vrm85_mV[0];
mV_vrm_table = &mV_vrm85[0];
} else {
- printk (KERN_INFO PFX "Mobile VRM\n");
+ printk(KERN_INFO PFX "Mobile VRM\n");
if (cpu_model < CPU_NEHEMIAH)
return;
vrm_mV_table = &mobilevrm_mV[0];
/* Calculate kHz for one voltage step */
kHz_step = (highest_speed - min_vid_speed) / numvscales;
-
j = 0;
while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
speed = longhaul_table[j].frequency;
pos = (speed - min_vid_speed) / kHz_step + minvid.pos;
else
pos = minvid.pos;
- f_msr_table[longhaul_table[j].index].vrm = mV_vrm_table[pos];
- f_msr_table[longhaul_table[j].index].pos = pos;
+ longhaul_table[j].index |= mV_vrm_table[pos] << 8;
+ vid = vrm_mV_table[mV_vrm_table[pos]];
+ printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n", speed, j, vid.mV);
j++;
}
- longhaul_pos = maxvid.pos;
can_scale_voltage = 1;
- printk(KERN_INFO PFX "Voltage scaling enabled. "
- "Use of \"conservative\" governor is highly recommended.\n");
+ printk(KERN_INFO PFX "Voltage scaling enabled.\n");
}
unsigned int target_freq, unsigned int relation)
{
unsigned int table_index = 0;
- unsigned int new_clock_ratio = 0;
+ unsigned int i;
+ unsigned int dir = 0;
+ u8 vid, current_vid;
if (cpufreq_frequency_table_target(policy, longhaul_table, target_freq, relation, &table_index))
return -EINVAL;
- new_clock_ratio = longhaul_table[table_index].index & 0xFF;
-
- longhaul_setstate(new_clock_ratio);
+ /* Don't set same frequency again */
+ if (longhaul_index == table_index)
+ return 0;
+ if (!can_scale_voltage)
+ longhaul_setstate(table_index);
+ else {
+ /* On test system voltage transitions exceeding single
+ * step up or down were turning motherboard off. Both
+ * "ondemand" and "userspace" are unsafe. C7 is doing
+ * this in hardware, C3 is old and we need to do this
+ * in software. */
+ i = longhaul_index;
+ current_vid = (longhaul_table[longhaul_index].index >> 8) & 0x1f;
+ if (table_index > longhaul_index)
+ dir = 1;
+ while (i != table_index) {
+ vid = (longhaul_table[i].index >> 8) & 0x1f;
+ if (vid != current_vid) {
+ longhaul_setstate(i);
+ current_vid = vid;
+ msleep(200);
+ }
+ if (dir)
+ i++;
+ else
+ i--;
+ }
+ longhaul_setstate(table_index);
+ }
+ longhaul_index = table_index;
return 0;
}
static int enable_arbiter_disable(void)
{
struct pci_dev *dev;
- int status;
+ int status = 1;
int reg;
u8 pci_cmd;
- status = 1;
/* Find PLE133 host bridge */
reg = 0x78;
dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8601_0,
return 0;
}
-static int longhaul_setup_vt8235(void)
+static int longhaul_setup_southbridge(void)
{
struct pci_dev *dev;
u8 pci_cmd;
/* Find VT8235 southbridge */
dev = pci_get_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, NULL);
+ if (dev == NULL)
+ /* Find VT8237 southbridge */
+ dev = pci_get_device(PCI_VENDOR_ID_VIA,
+ PCI_DEVICE_ID_VIA_8237, NULL);
if (dev != NULL) {
/* Set transition time to max */
pci_read_config_byte(dev, 0xec, &pci_cmd);
pci_read_config_byte(dev, 0xe5, &pci_cmd);
pci_cmd |= 1 << 7;
pci_write_config_byte(dev, 0xe5, pci_cmd);
+ /* Get address of ACPI registers block*/
+ pci_read_config_byte(dev, 0x81, &pci_cmd);
+ if (pci_cmd & 1 << 7) {
+ pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
+ acpi_regs_addr &= 0xff00;
+ printk(KERN_INFO PFX "ACPI I/O at 0x%x\n", acpi_regs_addr);
+ }
+
pci_dev_put(dev);
return 1;
}
char *cpuname=NULL;
int ret;
u32 lo, hi;
- int vt8235_present;
/* Check what we have on this motherboard */
switch (c->x86_model) {
};
/* Doesn't hurt */
- vt8235_present = longhaul_setup_vt8235();
+ longhaul_setup_southbridge();
/* Find ACPI data for processor */
acpi_walk_namespace(ACPI_TYPE_PROCESSOR, ACPI_ROOT_OBJECT,
/* Check ACPI support for C3 state */
if (pr != NULL && longhaul_version == TYPE_POWERSAVER) {
cx = &pr->power.states[ACPI_STATE_C3];
- if (cx->address > 0 && cx->latency <= 1000) {
+ if (cx->address > 0 && cx->latency <= 1000)
longhaul_flags |= USE_ACPI_C3;
- goto print_support_type;
- }
}
/* Check if northbridge is friendly */
- if (enable_arbiter_disable()) {
+ if (enable_arbiter_disable())
longhaul_flags |= USE_NORTHBRIDGE;
- goto print_support_type;
- }
- /* Use VT8235 southbridge if present */
- if (longhaul_version == TYPE_POWERSAVER && vt8235_present) {
- longhaul_flags |= USE_VT8235;
- goto print_support_type;
- }
+
/* Check ACPI support for bus master arbiter disable */
- if ((pr == NULL) || !(pr->flags.bm_control)) {
+ if (!(longhaul_flags & USE_ACPI_C3
+ || longhaul_flags & USE_NORTHBRIDGE)
+ && ((pr == NULL) || !(pr->flags.bm_control))) {
printk(KERN_ERR PFX
"No ACPI support. Unsupported northbridge.\n");
return -ENODEV;
}
-print_support_type:
if (longhaul_flags & USE_NORTHBRIDGE)
- printk (KERN_INFO PFX "Using northbridge support.\n");
- else if (longhaul_flags & USE_VT8235)
- printk (KERN_INFO PFX "Using VT8235 support.\n");
- else
- printk (KERN_INFO PFX "Using ACPI support.\n");
+ printk(KERN_INFO PFX "Using northbridge support.\n");
+ if (longhaul_flags & USE_ACPI_C3)
+ printk(KERN_INFO PFX "Using ACPI support.\n");
ret = longhaul_get_ranges();
if (ret != 0)
-1, /* 0000 -> RESERVED (10.0x) */
110, /* 0001 -> 11.0x */
- 120, /* 0010 -> 12.0x */
+ -1, /* 0010 -> 12.0x */
-1, /* 0011 -> RESERVED (9.0x)*/
105, /* 0100 -> 10.5x */
115, /* 0101 -> 11.5x */
static const int __initdata nehemiah_clock_ratio[32] = {
100, /* 0000 -> 10.0x */
- 160, /* 0001 -> 16.0x */
+ -1, /* 0001 -> 16.0x */
40, /* 0010 -> 4.0x */
90, /* 0011 -> 9.0x */
95, /* 0100 -> 9.5x */
75, /* 1101 -> 7.5x */
85, /* 1110 -> 8.5x */
120, /* 1111 -> 12.0x */
- 100, /* 0000 -> 10.0x */
+ -1, /* 0000 -> 10.0x */
110, /* 0001 -> 11.0x */
- 120, /* 0010 -> 12.0x */
- 90, /* 0011 -> 9.0x */
+ -1, /* 0010 -> 12.0x */
+ -1, /* 0011 -> 9.0x */
105, /* 0100 -> 10.5x */
115, /* 0101 -> 11.5x */
125, /* 0110 -> 12.5x */
145, /* 1100 -> 14.5x */
155, /* 1101 -> 15.5x */
-1, /* 1110 -> RESERVED (13.0x) */
- 120, /* 1111 -> 12.0x */
+ -1, /* 1111 -> 12.0x */
};
static const int __initdata nehemiah_eblcr[32] = {
if (supported_cpus == num_online_cpus()) {
printk(KERN_INFO PFX "Found %d %s "
- "processors (" VERSION ")\n", supported_cpus,
- boot_cpu_data.x86_model_id);
+ "processors (%d cpu cores) (" VERSION ")\n",
+ supported_cpus/cpu_data[0].booted_cores,
+ boot_cpu_data.x86_model_id, supported_cpus);
return cpufreq_register_driver(&cpufreq_amd64_driver);
}
* host brige. Abort on these systems.
*/
static struct pci_dev *hostbridge;
- u8 rev = 0;
hostbridge = pci_get_subsys(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_82815_MC,
if (!hostbridge)
return 2; /* 2-M */
- pci_read_config_byte(hostbridge, PCI_REVISION_ID, &rev);
- if (rev < 5) {
+ if (hostbridge->revision < 5) {
dprintk("hostbridge does not support speedstep\n");
speedstep_chipset_dev = NULL;
pci_dev_put(hostbridge);
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, "syscall", NULL, NULL, NULL, NULL,
NULL, NULL, NULL, "mp", "nx", NULL, "mmxext", NULL,
- NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm", "3dnowext", "3dnow",
+ NULL, "fxsr_opt", "pdpe1gb", "rdtscp", NULL, "lm",
+ "3dnowext", "3dnow",
/* Transmeta-defined */
"recovery", "longrun", NULL, "lrti", NULL, NULL, NULL, NULL,
/* Other (Linux-defined) */
"cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
NULL, NULL, NULL, NULL,
- "constant_tsc", "up", NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "constant_tsc", "up", NULL, "arch_perfmon",
+ "pebs", "bts", NULL, "sync_rdtsc",
+ "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* AMD-defined (#2) */
- "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8legacy", "abm",
- "sse4a", "misalignsse",
- "3dnowprefetch", "osvw", "ibs", NULL, NULL, NULL, NULL, NULL,
+ "lahf_lm", "cmp_legacy", "svm", "extapic", "cr8_legacy",
+ "altmovcr8", "abm", "sse4a",
+ "misalignsse", "3dnowprefetch",
+ "osvw", "ibs", NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+ /* Auxiliary (Linux-defined) */
+ "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
};
case E820_NVS:
printk("(ACPI NVS)\n");
break;
- default: printk("type %lu\n", e820.map[i].type);
+ default: printk("type %u\n", e820.map[i].type);
break;
}
}
/*
* Setup options
*/
-struct drive_info_struct { char dummy[32]; } drive_info;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_HD) || \
- defined(CONFIG_BLK_DEV_IDE_MODULE) || defined(CONFIG_BLK_DEV_HD_MODULE)
-EXPORT_SYMBOL(drive_info);
-#endif
struct screen_info screen_info;
EXPORT_SYMBOL(screen_info);
struct apm_info apm_info;
EXPORT_SYMBOL(apm_info);
-struct sys_desc_table_struct {
- unsigned short length;
- unsigned char table[0];
-};
struct edid_info edid_info;
EXPORT_SYMBOL_GPL(edid_info);
struct ist_info ist_info;
static char __initdata command_line[COMMAND_LINE_SIZE];
-unsigned char __initdata boot_params[PARAM_SIZE];
+struct boot_params __initdata boot_params;
#if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
struct edd edd;
#endif
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
- drive_info = DRIVE_INFO;
screen_info = SCREEN_INFO;
edid_info = EDID_INFO;
apm_info.bios = APM_BIOS_INFO;
+++ /dev/null
-/* Check if CPU has some minimum CPUID bits
- This runs in 16bit mode so that the caller can still use the BIOS
- to output errors on the screen */
-#include <asm/cpufeature.h>
-#include <asm/msr.h>
-
-verify_cpu:
- pushfl # Save caller passed flags
- pushl $0 # Kill any dangerous flags
- popfl
-
-#if CONFIG_X86_MINIMUM_CPU_MODEL >= 4
- pushfl
- pop %eax
- orl $(1<<18),%eax # try setting AC
- push %eax
- popfl
- pushfl
- popl %eax
- testl $(1<<18),%eax
- jz bad
-#endif
-#if REQUIRED_MASK1 != 0
- pushfl # standard way to check for cpuid
- popl %eax
- movl %eax,%ebx
- xorl $0x200000,%eax
- pushl %eax
- popfl
- pushfl
- popl %eax
- cmpl %eax,%ebx
- pushfl # standard way to check for cpuid
- popl %eax
- movl %eax,%ebx
- xorl $0x200000,%eax
- pushl %eax
- popfl
- pushfl
- popl %eax
- cmpl %eax,%ebx
- jz bad # REQUIRED_MASK1 != 0 requires CPUID
-
- movl $0x0,%eax # See if cpuid 1 is implemented
- cpuid
- cmpl $0x1,%eax
- jb bad # no cpuid 1
-
-#if REQUIRED_MASK1 & NEED_CMPXCHG64
- /* Some VIA C3s need magic MSRs to enable CX64. Do this here */
- cmpl $0x746e6543,%ebx # Cent
- jne 1f
- cmpl $0x48727561,%edx # aurH
- jne 1f
- cmpl $0x736c7561,%ecx # auls
- jne 1f
- movl $1,%eax # check model
- cpuid
- movl %eax,%ebx
- shr $8,%ebx
- andl $0xf,%ebx
- cmp $6,%ebx # check family == 6
- jne 1f
- shr $4,%eax
- andl $0xf,%eax
- cmpl $6,%eax # check model >= 6
- jb 1f
- # assume models >= 6 all support this MSR
- movl $MSR_VIA_FCR,%ecx
- rdmsr
- orl $((1<<1)|(1<<7)),%eax # enable CMPXCHG64 and PGE
- wrmsr
-1:
-#endif
- movl $0x1,%eax # Does the cpu have what it takes
- cpuid
-
-#if CONFIG_X86_MINIMUM_CPU_MODEL > 4
-#error add proper model checking here
-#endif
-
- andl $REQUIRED_MASK1,%edx
- xorl $REQUIRED_MASK1,%edx
- jnz bad
-#endif /* REQUIRED_MASK1 */
-
- popfl
- xor %eax,%eax
- ret
-
-bad:
- popfl
- movl $1,%eax
- ret
set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcia_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) {
+ (li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
panic("This machine is not SGI Visual Workstation 320/540");
}
if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
- (li_pcib_read16(PCI_DEVICE_ID) != PCI_VENDOR_ID_SGI_LITHIUM)) {
+ (li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
panic("This machine is not SGI Visual Workstation 320/540");
}
static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
{
u8 v;
- u8 revision;
int where = 0x55;
int mask = 0x1f; /* clear bits 5, 6, 7 by default */
- pci_read_config_byte(d, PCI_REVISION_ID, &revision);
-
if (d->device == PCI_DEVICE_ID_VIA_8367_0) {
/* fix pci bus latency issues resulted by NB bios error
it appears on bug free^Wreduced kt266x's bios forces
where = 0x95; /* the memory write queue timer register is
different for the KT266x's: 0x95 not 0x55 */
} else if (d->device == PCI_DEVICE_ID_VIA_8363_0 &&
- (revision == VIA_8363_KL133_REVISION_ID ||
- revision == VIA_8363_KM133_REVISION_ID)) {
+ (d->revision == VIA_8363_KL133_REVISION_ID ||
+ d->revision == VIA_8363_KM133_REVISION_ID)) {
mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5
causes screen corruption on the KL133/KM133 */
}
pci_read_config_byte(d, where, &v);
if (v & ~mask) {
printk(KERN_WARNING "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \
- d->device, revision, where, v, mask, v & mask);
+ d->device, d->revision, where, v, mask, v & mask);
v &= mask;
pci_write_config_byte(d, where, v);
}
here unless you are using a simulator without PCI support.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
source "drivers/pci/pcie/Kconfig"
.previous
#define BRL_COND_FSYS_BUBBLE_DOWN(pr) \
[1:](pr)brl.cond.sptk 0; \
+ ;; \
.xdata4 ".data.patch.brl_fsys_bubble_down", 1b-.
GLOBAL_ENTRY(__kernel_syscall_via_break)
*
* 2006-09-15 Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
* Add printing support for MCA/INIT.
+ *
+ * 2007-04-27 Russ Anderson <rja@sgi.com>
+ * Support multiple cpus going through OS_MCA in the same event.
*/
#include <linux/types.h>
#include <linux/init.h>
#endif
/* Used by mca_asm.S */
-u32 ia64_mca_serialize;
DEFINE_PER_CPU(u64, ia64_mca_data); /* == __per_cpu_mca[smp_processor_id()] */
DEFINE_PER_CPU(u64, ia64_mca_per_cpu_pte); /* PTE to map per-CPU area */
DEFINE_PER_CPU(u64, ia64_mca_pal_pte); /* PTE to map PAL code */
goto no_mod;
}
+ if (r13 != sos->prev_IA64_KR_CURRENT) {
+ msg = "inconsistent previous current and r13";
+ goto no_mod;
+ }
+
if (!mca_recover_range(ms->pmsa_iip)) {
- if (r13 != sos->prev_IA64_KR_CURRENT) {
- msg = "inconsistent previous current and r13";
- goto no_mod;
- }
if ((r12 - r13) >= KERNEL_STACK_SIZE) {
msg = "inconsistent r12 and r13";
goto no_mod;
* further MCA logging is enabled by clearing logs.
* Monarch also has the duty of sending wakeup-IPIs to pull the
* slave processors out of rendezvous spinloop.
+ *
+ * If multiple processors call into OS_MCA, the first will become
+ * the monarch. Subsequent cpus will be recorded in the mca_cpu
+ * bitmask. After the first monarch has processed its MCA, it
+ * will wake up the next cpu in the mca_cpu bitmask and then go
+ * into the rendezvous loop. When all processors have serviced
+ * their MCA, the last monarch frees up the rest of the processors.
*/
void
ia64_mca_handler(struct pt_regs *regs, struct switch_stack *sw,
struct task_struct *previous_current;
struct ia64_mca_notify_die nd =
{ .sos = sos, .monarch_cpu = &monarch_cpu };
+ static atomic_t mca_count;
+ static cpumask_t mca_cpu;
+ if (atomic_add_return(1, &mca_count) == 1) {
+ monarch_cpu = cpu;
+ sos->monarch = 1;
+ } else {
+ cpu_set(cpu, mca_cpu);
+ sos->monarch = 0;
+ }
mprintk(KERN_INFO "Entered OS MCA handler. PSP=%lx cpu=%d "
"monarch=%ld\n", sos->proc_state_param, cpu, sos->monarch);
previous_current = ia64_mca_modify_original_stack(regs, sw, sos, "MCA");
- monarch_cpu = cpu;
+
if (notify_die(DIE_MCA_MONARCH_ENTER, "MCA", regs, (long)&nd, 0, 0)
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
- ia64_wait_for_slaves(cpu, "MCA");
+ if (sos->monarch) {
+ ia64_wait_for_slaves(cpu, "MCA");
+ } else {
+ ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA;
+ while (cpu_isset(cpu, mca_cpu))
+ cpu_relax(); /* spin until monarch wakes us */
+ ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
+ }
/* Wakeup all the processors which are spinning in the rendezvous loop.
* They will leave SAL, then spin in the OS with interrupts disabled
== NOTIFY_STOP)
ia64_mca_spin(__FUNCTION__);
+
+ if (atomic_dec_return(&mca_count) > 0) {
+ int i;
+
+ /* wake up the next monarch cpu,
+ * and put this cpu in the rendez loop.
+ */
+ ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA;
+ for_each_online_cpu(i) {
+ if (cpu_isset(i, mca_cpu)) {
+ monarch_cpu = i;
+ cpu_clear(i, mca_cpu); /* wake next cpu */
+ while (monarch_cpu != -1)
+ cpu_relax(); /* spin until last cpu leaves */
+ ia64_mc_info.imi_rendez_checkin[cpu] = IA64_MCA_RENDEZ_CHECKIN_NOTDONE;
+ set_curr_task(cpu, previous_current);
+ return;
+ }
+ }
+ }
set_curr_task(cpu, previous_current);
monarch_cpu = -1;
}
//StartMain////////////////////////////////////////////////////////////////////
ia64_os_mca_dispatch:
- // Serialize all MCA processing
- mov r3=1;;
- LOAD_PHYSICAL(p0,r2,ia64_mca_serialize);;
-ia64_os_mca_spin:
- xchg4 r4=[r2],r3;;
- cmp.ne p6,p0=r4,r0
-(p6) br ia64_os_mca_spin
-
mov r3=IA64_MCA_CPU_MCA_STACK_OFFSET // use the MCA stack
LOAD_PHYSICAL(p0,r2,1f) // return address
mov r19=1 // All MCA events are treated as monarch (for now)
mov b0=r12 // SAL_CHECK return address
- // release lock
- LOAD_PHYSICAL(p0,r3,ia64_mca_serialize);;
- st4.rel [r3]=r0
-
br b0
//EndMain//////////////////////////////////////////////////////////////////////
mov b6=loc1
;;
mov loc1=rp
- ssm psr.i | psr.ic
+ ssm psr.ic
+ ;;
+ srlz.i
+ ;;
+ ssm psr.i
br.call.sptk.many rp=b6 // does not return ...
;;
mov ar.pfs=loc0
static void
do_copy_task_regs (struct task_struct *task, struct unw_frame_info *info, void *arg)
{
- unsigned long mask, sp, nat_bits = 0, ip, ar_rnat, urbs_end, cfm;
+ unsigned long mask, sp, nat_bits = 0, ar_rnat, urbs_end, cfm;
+ unsigned long uninitialized_var(ip); /* GCC be quiet */
elf_greg_t *dst = arg;
struct pt_regs *pt;
char nat;
void __devinit
ia64_tlb_init (void)
{
- ia64_ptce_info_t ptce_info;
+ ia64_ptce_info_t uninitialized_var(ptce_info); /* GCC be quiet */
unsigned long tr_pgbits;
long status;
pci_mmap_page_range (struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine)
{
+ unsigned long size = vma->vm_end - vma->vm_start;
+ pgprot_t prot;
+
/*
* I/O space cannot be accessed via normal processor loads and
* stores on this platform.
*/
return -EINVAL;
+ if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
+ return -EINVAL;
+
+ prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size,
+ vma->vm_page_prot);
+
/*
- * Leave vm_pgoff as-is, the PCI space address is the physical
- * address on this platform.
+ * If the user requested WC, the kernel uses UC or WC for this region,
+ * and the chipset supports WC, we can use WC. Otherwise, we have to
+ * use the same attribute the kernel uses.
*/
- if (write_combine && efi_range_is_wc(vma->vm_start,
- vma->vm_end - vma->vm_start))
+ if (write_combine &&
+ ((pgprot_val(prot) & _PAGE_MA_MASK) == _PAGE_MA_UC ||
+ (pgprot_val(prot) & _PAGE_MA_MASK) == _PAGE_MA_WC) &&
+ efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
else
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ vma->vm_page_prot = prot;
if (remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start, vma->vm_page_prot))
void __iomem *addr;
struct pcidev_info *pcidev_info = NULL;
struct sn_irq_info *sn_irq_info = NULL;
- size_t size;
+ size_t image_size, size;
if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
panic("%s: Failure obtaining pcidev_info for %s\n",
if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) {
/*
* A valid ROM image exists and has been shadowed by the
- * PROM. Setup the pci_dev ROM resource to point to
- * the shadowed copy.
+ * PROM. Setup the pci_dev ROM resource with the address
+ * of the shadowed copy, and the actual length of the ROM image.
*/
- size = dev->resource[PCI_ROM_RESOURCE].end -
- dev->resource[PCI_ROM_RESOURCE].start;
- addr =
- ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
- size);
+ size = pci_resource_len(dev, PCI_ROM_RESOURCE);
+ addr = ioremap(pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE],
+ size);
+ image_size = pci_get_rom_size(addr, size);
dev->resource[PCI_ROM_RESOURCE].start = (unsigned long) addr;
dev->resource[PCI_ROM_RESOURCE].end =
- (unsigned long) addr + size;
+ (unsigned long) addr + image_size - 1;
dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY;
}
sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
insert_resource(&ioport_resource, &dev->resource[idx]);
else
insert_resource(&iomem_resource, &dev->resource[idx]);
- /* If ROM, mark as shadowed in PROM */
- if (idx == PCI_ROM_RESOURCE)
- dev->resource[idx].flags |= IORESOURCE_ROM_BIOS_COPY;
+ /*
+ * If ROM, set the actual ROM image size, and mark as
+ * shadowed in PROM.
+ */
+ if (idx == PCI_ROM_RESOURCE) {
+ size_t image_size;
+ void __iomem *rom;
+
+ rom = ioremap(pci_resource_start(dev, PCI_ROM_RESOURCE),
+ size + 1);
+ image_size = pci_get_rom_size(rom, size + 1);
+ dev->resource[PCI_ROM_RESOURCE].end =
+ dev->resource[PCI_ROM_RESOURCE].start +
+ image_size - 1;
+ dev->resource[PCI_ROM_RESOURCE].flags |=
+ IORESOURCE_ROM_BIOS_COPY;
+ }
}
/* Create a pci_window in the pci_controller struct for
* each device resource.
static int is_fpga_tio(int nasid, int *bt)
{
- u16 ioboard_type;
+ u16 uninitialized_var(ioboard_type); /* GCC be quiet */
s64 rc;
rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard_type);
u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus)
{
s64 rc;
- u16 ioboard;
+ u16 uninitialized_var(ioboard); /* GCC be quiet */
nasid_t nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base);
rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard);
select ARC32
select ARCH_MAY_HAVE_PC_FDC
select GENERIC_ISA_DMA
- select I8253
select I8259
select ISA
+ select PCSPEAKER
select SYS_HAS_CPU_R4X00
select SYS_SUPPORTS_32BIT_KERNEL
select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
select DMA_COHERENT
select GENERIC_ISA_DMA
select HAVE_STD_PC_SERIAL_PORT
- select I8253
select I8259
select ISA
+ select PCSPEAKER
select SWAP_IO_SPACE
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
select HW_HAS_EISA
select HW_HAS_PCI
select IRQ_CPU
- select I8253
select I8259
select ISA
+ select PCSPEAKER
select SWAP_IO_SPACE if CPU_BIG_ENDIAN
select SYS_HAS_CPU_R4X00
select SYS_HAS_CPU_R5000
it off), but ensures that IPIs are handled promptly even under
heavy I/O interrupt load.
+config MIPS_MT_SMTC_IM_BACKSTOP
+ bool "Use per-TC register bits as backstop for inhibited IM bits"
+ depends on MIPS_MT_SMTC
+ default y
+ help
+ To support multiple TC microthreads acting as "CPUs" within
+ a VPE, VPE-wide interrupt mask bits must be specially manipulated
+ during interrupt handling. To support legacy drivers and interrupt
+ controller management code, SMTC has a "backstop" to track and
+ if necessary restore the interrupt mask. This has some performance
+ impact on interrupt service overhead. Disable it only if you know
+ what you are doing.
+
config MIPS_VPE_LOADER_TOM
bool "Load VPE program into memory hidden from linux"
depends on MIPS_VPE_LOADER
bool
default y
-config I8253
+config PCSPEAKER
bool
source "drivers/pcmcia/Kconfig"
argptr = prom_getcmdline();
/* default panel */
/*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
-#ifdef CONFIG_MIPS_HYDROGEN3
- strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor");
-#endif
}
#endif
#
CONFIG_ISA=y
CONFIG_MMU=y
-CONFIG_I8253=y
+CONFIG_PCSPEAKER=y
#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_ISA=y
CONFIG_MMU=y
-CONFIG_I8253=y
+CONFIG_PCSPEAKER=y
#
# PCCARD (PCMCIA/CardBus) support
CONFIG_ISA=y
# CONFIG_EISA is not set
CONFIG_MMU=y
-CONFIG_I8253=y
+CONFIG_PCSPEAKER=y
#
# PCCARD (PCMCIA/CardBus) support
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
-CONFIG_GEN_RTC=y
-CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
obj-$(CONFIG_64BIT) += cpu-bugs64.o
-obj-$(CONFIG_I8253) += i8253.o
+obj-$(CONFIG_PCSPEAKER) += pcspeaker.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
LONG_S sp, TI_REGS($28)
jal deferred_smtc_ipi
LONG_S s0, TI_REGS($28)
+#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
/* Re-arm any temporarily masked interrupts not explicitly "acked" */
mfc0 v0, CP0_TCSTATUS
ori v1, v0, TCSTATUS_IXMT
_ehb
xor t0, t0, t3
mtc0 t0, CP0_TCCONTEXT
+#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
#endif /* CONFIG_MIPS_MT_SMTC */
.set noat
RESTORE_TEMP
*/
mfc0 t1, CP0_STATUS
and t0, a0, t1
+#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
mfc0 t2, CP0_TCCONTEXT
or t0, t0, t2
mtc0 t0, CP0_TCCONTEXT
+#endif /* CONFIG_MIPS_MT_SMTC_IM_BACKSTOP */
xor t1, t1, t0
mtc0 t1, CP0_STATUS
_ehb
move $28, a2
cpu_restore_nonscratch a1
-#if (_THREAD_SIZE - 32) < 0x10000
- PTR_ADDIU t0, $28, _THREAD_SIZE - 32
-#else
- PTR_LI t0, _THREAD_SIZE - 32
- PTR_ADDU t0, $28
-#endif
+ PTR_ADDU t0, $28, _THREAD_SIZE - 32
set_saved_sp t0, t1, t2
#ifdef CONFIG_MIPS_MT_SMTC
/* Read-modify-writes of Status must be atomic on a VPE */
action = MIPS_BE_FIXUP;
if (board_be_handler)
- action = board_be_handler(regs, fixup != 0);
+ action = board_be_handler(regs, fixup != NULL);
switch (action) {
case MIPS_BE_DISCARD:
#include <asm/mipsregs.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/tlbdebug.h>
static inline const char *msk2str(unsigned int mask)
{
#include <asm/mipsregs.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/tlbdebug.h>
extern int r3k_have_wired_reg; /* defined in tlb-r3k.c */
#include <asm/addrspace.h>
#include <asm/bug.h>
+#include <asm/cacheflush.h>
#ifndef CKSEG2
#define CKSEG2 CKSSEG
irq = irq_ffs(pending);
if (irq > 0)
- do_IRQ(MIPSCPU_INT_BASE + irq);
+ do_IRQ(MIPS_CPU_IRQ_BASE + irq);
else
spurious_interrupt();
}
/* hardware int 4 - the serial int, is CPU int 6
but poll for now */
s.irq = 0;
- s.uartclk = BASE_BAUD * 16;
+ s.uartclk = 1843200;
s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST;
s.iotype = UPIO_PORT;
s.regshift = 0;
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/mc146818rtc.h>
-#include <linux/mipsregs.h>
#include <linux/smp.h>
#include <linux/timex.h>
# Makefile for the PCI specific kernel interface routines under Linux.
#
-obj-y += pci.o pci-dac.o
+obj-y += pci.o
#
# PCI bus host bridge specific code
static void qube_raq_galileo_fixup(struct pci_dev *dev)
{
- unsigned short galileo_id;
-
if (dev->devfn != PCI_DEVFN(0, 0))
return;
* Therefore we must set the disconnect/retry cycle values to
* something sensible when using the new Galileo.
*/
- pci_read_config_word(dev, PCI_REVISION_ID, &galileo_id);
- galileo_id &= 0xff; /* mask off class info */
- printk(KERN_INFO "Galileo: revision %u\n", galileo_id);
+ printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
#if 0
- if (galileo_id >= 0x10) {
+ if (dev->revision >= 0x10) {
/* New Galileo, assumes PCI stop line to VIA is connected. */
GT_WRITE(GT_PCI0_TOR_OFS, 0x4020);
- } else if (galileo_id == 0x1 || galileo_id == 0x2)
+ } else if (dev->revision == 0x1 || dev->revision == 0x2)
#endif
{
signed int timeo;
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000 Ani Joshi <ajoshi@unixbox.com>
- * Copyright (C) 2000, 2001, 06 Ralf Baechle <ralf@linux-mips.org>
- * swiped from i386, and cloned for MIPS by Geert, polished by Ralf.
- */
-
-#include <linux/types.h>
-#include <linux/dma-mapping.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/cache.h>
-#include <asm/io.h>
-
-#include <dma-coherence.h>
-
-#include <linux/pci.h>
-
-dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
- struct page *page, unsigned long offset, int direction)
-{
- struct device *dev = &pdev->dev;
-
- BUG_ON(direction == DMA_NONE);
-
- if (!plat_device_is_coherent(dev)) {
- unsigned long addr;
-
- addr = (unsigned long) page_address(page) + offset;
- dma_cache_wback_inv(addr, PAGE_SIZE);
- }
-
- return plat_map_dma_mem_page(dev, page) + offset;
-}
-
-EXPORT_SYMBOL(pci_dac_page_to_dma);
-
-struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
- dma64_addr_t dma_addr)
-{
- return pfn_to_page(plat_dma_addr_to_phys(dma_addr) >> PAGE_SHIFT);
-}
-
-EXPORT_SYMBOL(pci_dac_dma_to_page);
-
-unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
- dma64_addr_t dma_addr)
-{
- return dma_addr & ~PAGE_MASK;
-}
-
-EXPORT_SYMBOL(pci_dac_dma_to_offset);
-
-void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
- dma64_addr_t dma_addr, size_t len, int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
-
- if (!plat_device_is_coherent(&pdev->dev))
- dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len);
-}
-
-EXPORT_SYMBOL(pci_dac_dma_sync_single_for_cpu);
-
-void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
- dma64_addr_t dma_addr, size_t len, int direction)
-{
- BUG_ON(direction == PCI_DMA_NONE);
-
- if (!plat_device_is_coherent(&pdev->dev))
- dma_cache_wback_inv(dma_addr + PAGE_OFFSET, len);
-}
-
-EXPORT_SYMBOL(pci_dac_dma_sync_single_for_device);
}
for (ln = bus->devices.next; ln != &bus->devices; ln = ln->next) {
- struct pci_dev *dev = pci_dev_b(ln);
+ dev = pci_dev_b(ln);
if ((dev->class >> 8) != PCI_CLASS_BRIDGE_PCI)
pcibios_fixup_device_resources(dev, bus);
+++ /dev/null
-/*
- * Copyright (C) 2000, 2001 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
- */
-
-/*
- * Time routines for the swarm board. We pass all the hard stuff
- * through to the sb1250 handling code. Only thing we really keep
- * track of here is what time of day we think it is. And we don't
- * really even do a good job of that...
- */
-
-
-#include <linux/bcd.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <asm/system.h>
-#include <asm/addrspace.h>
-#include <asm/io.h>
-
-#include <asm/sibyte/sb1250.h>
-#include <asm/sibyte/sb1250_regs.h>
-#include <asm/sibyte/sb1250_smbus.h>
-
-static unsigned long long sec_bias = 0;
-static unsigned int usec_bias = 0;
-
-/* Xicor 1241 definitions */
-
-/*
- * Register bits
- */
-
-#define X1241REG_SR_BAT 0x80 /* currently on battery power */
-#define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */
-#define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */
-#define X1241REG_SR_RTCF 0x01 /* clock failed */
-#define X1241REG_BL_BP2 0x80 /* block protect 2 */
-#define X1241REG_BL_BP1 0x40 /* block protect 1 */
-#define X1241REG_BL_BP0 0x20 /* block protect 0 */
-#define X1241REG_BL_WD1 0x10
-#define X1241REG_BL_WD0 0x08
-#define X1241REG_HR_MIL 0x80 /* military time format */
-
-/*
- * Register numbers
- */
-
-#define X1241REG_BL 0x10 /* block protect bits */
-#define X1241REG_INT 0x11 /* */
-#define X1241REG_SC 0x30 /* Seconds */
-#define X1241REG_MN 0x31 /* Minutes */
-#define X1241REG_HR 0x32 /* Hours */
-#define X1241REG_DT 0x33 /* Day of month */
-#define X1241REG_MO 0x34 /* Month */
-#define X1241REG_YR 0x35 /* Year */
-#define X1241REG_DW 0x36 /* Day of Week */
-#define X1241REG_Y2K 0x37 /* Year 2K */
-#define X1241REG_SR 0x3F /* Status register */
-
-#define X1241_CCR_ADDRESS 0x6F
-
-#define SMB_CSR(reg) (IOADDR(A_SMB_REGISTER(1, reg)))
-
-static int xicor_read(uint8_t addr)
-{
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD));
- __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA));
- __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE,
- SMB_CSR(R_SMB_START));
-
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE,
- SMB_CSR(R_SMB_START));
-
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
- /* Clear error bit by writing a 1 */
- __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
- return -1;
- }
-
- return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff);
-}
-
-static int xicor_write(uint8_t addr, int b)
-{
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- __raw_writeq(addr, SMB_CSR(R_SMB_CMD));
- __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA));
- __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE,
- SMB_CSR(R_SMB_START));
-
- while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY)
- ;
-
- if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) {
- /* Clear error bit by writing a 1 */
- __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS));
- return -1;
- } else {
- return 0;
- }
-}
-
-/*
- * In order to set the CMOS clock precisely, set_rtc_mmss has to be
- * called 500 ms after the second nowtime has started, because when
- * nowtime is written into the registers of the CMOS clock, it will
- * jump to the next second precisely 500 ms later. Check the Motorola
- * MC146818A or Dallas DS12887 data sheet for details.
- *
- * BUG: This routine does not handle hour overflow properly; it just
- * sets the minutes. Usually you'll only notice that after reboot!
- */
-int set_rtc_mmss(unsigned long nowtime)
-{
- int retval = 0;
- int real_seconds, real_minutes, cmos_minutes;
-
- cmos_minutes = xicor_read(X1241REG_MN);
- cmos_minutes = BCD2BIN(cmos_minutes);
-
- /*
- * since we're only adjusting minutes and seconds,
- * don't interfere with hour overflow. This avoids
- * messing with unknown time zones but requires your
- * RTC not to be off by more than 15 minutes
- */
- real_seconds = nowtime % 60;
- real_minutes = nowtime / 60;
- if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
- real_minutes += 30; /* correct for half hour time zone */
- real_minutes %= 60;
-
- /* unlock writes to the CCR */
- xicor_write(X1241REG_SR, X1241REG_SR_WEL);
- xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL);
-
- if (abs(real_minutes - cmos_minutes) < 30) {
- real_seconds = BIN2BCD(real_seconds);
- real_minutes = BIN2BCD(real_minutes);
- xicor_write(X1241REG_SC, real_seconds);
- xicor_write(X1241REG_MN, real_minutes);
- } else {
- printk(KERN_WARNING
- "set_rtc_mmss: can't update from %d to %d\n",
- cmos_minutes, real_minutes);
- retval = -1;
- }
-
- xicor_write(X1241REG_SR, 0);
-
- printk("set_rtc_mmss: %02d:%02d\n", real_minutes, real_seconds);
-
- return retval;
-}
-
-static unsigned long __init get_swarm_time(void)
-{
- unsigned int year, mon, day, hour, min, sec, y2k;
-
- sec = xicor_read(X1241REG_SC);
- min = xicor_read(X1241REG_MN);
- hour = xicor_read(X1241REG_HR);
-
- if (hour & X1241REG_HR_MIL) {
- hour &= 0x3f;
- } else {
- if (hour & 0x20)
- hour = (hour & 0xf) + 0x12;
- }
-
- sec = BCD2BIN(sec);
- min = BCD2BIN(min);
- hour = BCD2BIN(hour);
-
- day = xicor_read(X1241REG_DT);
- mon = xicor_read(X1241REG_MO);
- year = xicor_read(X1241REG_YR);
- y2k = xicor_read(X1241REG_Y2K);
-
- day = BCD2BIN(day);
- mon = BCD2BIN(mon);
- year = BCD2BIN(year);
- y2k = BCD2BIN(y2k);
-
- year += (y2k * 100);
-
- return mktime(year, mon, day, hour, min, sec);
-}
-
-/*
- * Bring up the timer at 100 Hz.
- */
-void __init swarm_time_init(void)
-{
- unsigned int flags;
- int status;
-
- /* Set up the scd general purpose timer 0 to cpu 0 */
- sb1250_time_init();
-
- /* Establish communication with the Xicor 1241 RTC */
- /* XXXKW how do I share the SMBus with the I2C subsystem? */
-
- __raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ));
- __raw_writeq(0, SMB_CSR(R_SMB_CONTROL));
-
- if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) {
- printk("x1241: couldn't detect on SWARM SMBus 1\n");
- } else {
- if (status & X1241REG_SR_RTCF)
- printk("x1241: battery failed -- time is probably wrong\n");
- write_seqlock_irqsave(&xtime_lock, flags);
- xtime.tv_sec = get_swarm_time();
- xtime.tv_nsec = 0;
- write_sequnlock_irqrestore(&xtime_lock, flags);
- }
-}
static struct resource snirm_53c710_rsrc[] = {
{
- .start = 0xb9000000,
- .end = 0xb90fffff,
+ .start = 0x19000000,
+ .end = 0x190fffff,
.flags = IORESOURCE_MEM
},
{
static struct resource sc26xx_rsrc[] = {
{
- .start = 0xbc070000,
- .end = 0xbc0700ff,
+ .start = 0x1c070000,
+ .end = 0x1c0700ff,
.flags = IORESOURCE_MEM
},
{
static struct resource snirm_53c710_rm200_rsrc[] = {
{
- .start = 0xb9000000,
- .end = 0xb90fffff,
+ .start = 0x19000000,
+ .end = 0x190fffff,
.flags = IORESOURCE_MEM
},
{
# Makefile for common code of the NEC VR4100 series.
#
-obj-y += bcu.o cmu.o icu.o init.o irq.o pmu.o type.o
+obj-y += bcu.o cmu.o giu.o icu.o init.o irq.o pmu.o rtc.o siu.o type.o
--- /dev/null
+/*
+ * NEC VR4100 series GIU platform device.
+ *
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/cpu.h>
+#include <asm/vr41xx/giu.h>
+#include <asm/vr41xx/irq.h>
+
+static struct resource giu_50pins_pullupdown_resource[] __initdata = {
+ {
+ .start = 0x0b000100,
+ .end = 0x0b00011f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x0b0002e0,
+ .end = 0x0b0002e3,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = GIUINT_IRQ,
+ .end = GIUINT_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource giu_36pins_resource[] __initdata = {
+ {
+ .start = 0x0f000140,
+ .end = 0x0f00015f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = GIUINT_IRQ,
+ .end = GIUINT_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource giu_48pins_resource[] __initdata = {
+ {
+ .start = 0x0f000140,
+ .end = 0x0f000167,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = GIUINT_IRQ,
+ .end = GIUINT_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int __init vr41xx_giu_add(void)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+ unsigned int num;
+ int retval;
+
+ pdev = platform_device_alloc("GIU", -1);
+ if (!pdev)
+ return -ENOMEM;
+
+ switch (current_cpu_data.cputype) {
+ case CPU_VR4111:
+ case CPU_VR4121:
+ pdev->id = GPIO_50PINS_PULLUPDOWN;
+ res = giu_50pins_pullupdown_resource;
+ num = ARRAY_SIZE(giu_50pins_pullupdown_resource);
+ break;
+ case CPU_VR4122:
+ case CPU_VR4131:
+ pdev->id = GPIO_36PINS;
+ res = giu_36pins_resource;
+ num = ARRAY_SIZE(giu_36pins_resource);
+ break;
+ case CPU_VR4133:
+ pdev->id = GPIO_48PINS_EDGE_SELECT;
+ res = giu_48pins_resource;
+ num = ARRAY_SIZE(giu_48pins_resource);
+ break;
+ default:
+ retval = -ENODEV;
+ goto err_free_device;
+ }
+
+ retval = platform_device_add_resources(pdev, res, num);
+ if (retval)
+ goto err_free_device;
+
+ retval = platform_device_add(pdev);
+ if (retval)
+ goto err_free_device;
+
+ return 0;
+
+err_free_device:
+ platform_device_put(pdev);
+
+ return retval;
+}
+device_initcall(vr41xx_giu_add);
--- /dev/null
+/*
+ * NEC VR4100 series RTC platform device.
+ *
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/cpu.h>
+#include <asm/vr41xx/irq.h>
+
+static struct resource rtc_type1_resource[] __initdata = {
+ {
+ .start = 0x0b0000c0,
+ .end = 0x0b0000df,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x0b0001c0,
+ .end = 0x0b0001df,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = ELAPSEDTIME_IRQ,
+ .end = ELAPSEDTIME_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = RTCLONG1_IRQ,
+ .end = RTCLONG1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource rtc_type2_resource[] __initdata = {
+ {
+ .start = 0x0f000100,
+ .end = 0x0f00011f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x0f000120,
+ .end = 0x0f00013f,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = ELAPSEDTIME_IRQ,
+ .end = ELAPSEDTIME_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = RTCLONG1_IRQ,
+ .end = RTCLONG1_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int __init vr41xx_rtc_add(void)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+ unsigned int num;
+ int retval;
+
+ pdev = platform_device_alloc("RTC", -1);
+ if (!pdev)
+ return -ENOMEM;
+
+ switch (current_cpu_data.cputype) {
+ case CPU_VR4111:
+ case CPU_VR4121:
+ res = rtc_type1_resource;
+ num = ARRAY_SIZE(rtc_type1_resource);
+ break;
+ case CPU_VR4122:
+ case CPU_VR4131:
+ case CPU_VR4133:
+ res = rtc_type2_resource;
+ num = ARRAY_SIZE(rtc_type2_resource);
+ break;
+ default:
+ retval = -ENODEV;
+ goto err_free_device;
+ }
+
+ retval = platform_device_add_resources(pdev, res, num);
+ if (retval)
+ goto err_free_device;
+
+ retval = platform_device_add(pdev);
+ if (retval)
+ goto err_free_device;
+
+ return 0;
+
+err_free_device:
+ platform_device_put(pdev);
+
+ return retval;
+}
+device_initcall(vr41xx_rtc_add);
--- /dev/null
+/*
+ * NEC VR4100 series SIU platform device.
+ *
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+
+#include <asm/cpu.h>
+#include <asm/vr41xx/siu.h>
+
+static unsigned int siu_type1_ports[SIU_PORTS_MAX] __initdata = {
+ PORT_VR41XX_SIU,
+ PORT_UNKNOWN,
+};
+
+static struct resource siu_type1_resource[] __initdata = {
+ {
+ .start = 0x0c000000,
+ .end = 0x0c00000a,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = SIU_IRQ,
+ .end = SIU_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static unsigned int siu_type2_ports[SIU_PORTS_MAX] __initdata = {
+ PORT_VR41XX_SIU,
+ PORT_VR41XX_DSIU,
+};
+
+static struct resource siu_type2_resource[] __initdata = {
+ {
+ .start = 0x0f000800,
+ .end = 0x0f00080a,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = 0x0f000820,
+ .end = 0x0f000829,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = SIU_IRQ,
+ .end = SIU_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = DSIU_IRQ,
+ .end = DSIU_IRQ,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int __init vr41xx_siu_add(void)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+ unsigned int num;
+ int retval;
+
+ pdev = platform_device_alloc("SIU", -1);
+ if (!pdev)
+ return -ENOMEM;
+
+ switch (current_cpu_data.cputype) {
+ case CPU_VR4111:
+ case CPU_VR4121:
+ pdev->dev.platform_data = siu_type1_ports;
+ res = siu_type1_resource;
+ num = ARRAY_SIZE(siu_type1_resource);
+ break;
+ case CPU_VR4122:
+ case CPU_VR4131:
+ case CPU_VR4133:
+ pdev->dev.platform_data = siu_type2_ports;
+ res = siu_type2_resource;
+ num = ARRAY_SIZE(siu_type2_resource);
+ break;
+ default:
+ retval = -ENODEV;
+ goto err_free_device;
+ }
+
+ retval = platform_device_add_resources(pdev, res, num);
+ if (retval)
+ goto err_free_device;
+
+ retval = platform_device_add(pdev);
+ if (retval)
+ goto err_free_device;
+
+ return 0;
+
+err_free_device:
+ platform_device_put(pdev);
+
+ return retval;
+}
+device_initcall(vr41xx_siu_add);
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
config PCI_QSPAN
bool "QSpan PCI"
#endif /* CONFIG_PPC_OF */
/* Add sysfs properties */
-void pcibios_add_platform_entries(struct pci_dev *pdev)
+int pcibios_add_platform_entries(struct pci_dev *pdev)
{
#ifdef CONFIG_PPC_OF
- device_create_file(&pdev->dev, &dev_attr_devspec);
+ return device_create_file(&pdev->dev, &dev_attr_devspec);
#endif /* CONFIG_PPC_OF */
}
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
+ dev->revision = get_int_prop(node, "revision-id", 0);
DBG(" class: 0x%x\n", dev->class);
+ DBG(" revision: 0x%x\n", dev->revision);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
}
static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
-void pcibios_add_platform_entries(struct pci_dev *pdev)
+int pcibios_add_platform_entries(struct pci_dev *pdev)
{
- device_create_file(&pdev->dev, &dev_attr_devspec);
+ return device_create_file(&pdev->dev, &dev_attr_devspec);
}
#define ISA_SPACE_MASK 0x1
}
else {
skb_put(skb,pkt_len-4); /* Make room */
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
(unsigned char *)__va(bdp->cbd_bufaddr),
- pkt_len-4, 0);
+ pkt_len-4);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
}
else {
skb_put(skb,pkt_len); /* Make room */
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
(unsigned char *)__va(bdp->cbd_bufaddr),
- pkt_len, 0);
+ pkt_len);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
}
else {
skb_put(skb,pkt_len-4); /* Make room */
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
cep->rx_vaddr[bdp - cep->rx_bd_base],
- pkt_len-4, 0);
+ pkt_len-4);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
fep->stats.rx_dropped++;
} else {
skb_put(skb,pkt_len-4); /* Make room */
- eth_copy_and_sum(skb, data, pkt_len-4, 0);
+ skb_copy_to_linear_data(skb, data, pkt_len-4);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
config MPC83xx_PCI2
bool "Support for 2nd PCI host controller"
{
}
-/* Add sysfs properties */
-void pcibios_add_platform_entries(struct pci_dev *pdev)
-{
-}
-
-
static int __init
pcibios_init(void)
{
.attr = {
.name = "hs_reg",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = VAL_LEN_MAX,
.read = mv64xxx_hs_reg_read,
.attr = {
.name = "binary_parameter",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = PAGE_SIZE,
.read = &ipl_parameter_read,
.attr = {
.name = "scp_data",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = PAGE_SIZE,
.read = &ipl_scp_data_read,
CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
All of these platforms are extremely obscure, so say N if unsure.
+config PCI_SYSCALL
+ def_bool PCI
+
source "drivers/pci/Kconfig"
endif
doesn't.
config PCI_DOMAINS
- bool
- default PCI
+ def_bool PCI
+
+config PCI_SYSCALL
+ def_bool PCI
source "drivers/pci/Kconfig"
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
dev->class = class >> 8;
+ dev->revision = class & 0xff;
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
This is purely to save memory - each supported CPU requires
memory in the static kernel configuration.
+config PHYSICAL_ALIGN
+ hex
+ default "0x200000"
+
config HOTPLUG_CPU
bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
depends on SMP && HOTPLUG && EXPERIMENTAL
#
# arch/x86_64/boot/Makefile
#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1994 by Linus Torvalds
-#
-
-# ROOT_DEV specifies the default root-device when making the image.
-# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
-# the default of FLOPPY is used by 'build'.
-
-ROOT_DEV := CURRENT
-
-# If you want to preset the SVGA mode, uncomment the next line and
-# set SVGA_MODE to whatever number you want.
-# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
-# The number is the same as you would ordinarily press at bootup.
-
-SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
-
-# If you want the RAM disk device, define this to be the size in blocks.
-
-#RAMDISK := -DRAMDISK=512
-
-targets := vmlinux.bin bootsect bootsect.o \
- setup setup.o bzImage mtools.conf
-
-EXTRA_CFLAGS := -m32
-
-hostprogs-y := tools/build
-HOST_EXTRACFLAGS += $(LINUXINCLUDE)
-subdir- := compressed/ #Let make clean descend in compressed/
-# ---------------------------------------------------------------------------
-
-$(obj)/bzImage: IMAGE_OFFSET := 0x100000
-$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
-$(obj)/bzImage: BUILDFLAGS := -b
-
-quiet_cmd_image = BUILD $@
-cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/bootsect $(obj)/setup \
- $(obj)/vmlinux.bin $(ROOT_DEV) > $@
-
-$(obj)/bzImage: $(obj)/bootsect $(obj)/setup \
- $(obj)/vmlinux.bin $(obj)/tools/build FORCE
- $(call if_changed,image)
- @echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
-
-$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,objcopy)
-
-LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary
-LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext
-
-$(obj)/setup $(obj)/bootsect: %: %.o FORCE
- $(call if_changed,ld)
-
-$(obj)/compressed/vmlinux: FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
-
-# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
-FDARGS =
-# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
-FDINITRD =
-
-image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
-
-$(obj)/mtools.conf: $(src)/mtools.conf.in
- sed -e 's|@OBJ@|$(obj)|g' < $< > $@
-
-# This requires write access to /dev/fd0
-zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
- MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
- syslinux /dev/fd0 ; sync
- echo '$(image_cmdline)' | \
- MTOOLSRC=$(obj)/mtools.conf mcopy - a:syslinux.cfg
- if [ -f '$(FDINITRD)' ] ; then \
- MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
- fi
- MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
-
-# These require being root or having syslinux 2.02 or higher installed
-fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
- dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
- MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
- syslinux $(obj)/fdimage ; sync
- echo '$(image_cmdline)' | \
- MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
- if [ -f '$(FDINITRD)' ] ; then \
- MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
- fi
- MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
-
-fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
- dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
- MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
- syslinux $(obj)/fdimage ; sync
- echo '$(image_cmdline)' | \
- MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
- if [ -f '$(FDINITRD)' ] ; then \
- MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
- fi
- MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
-
-isoimage: $(BOOTIMAGE)
- -rm -rf $(obj)/isoimage
- mkdir $(obj)/isoimage
- for i in lib lib64 share end ; do \
- if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
- cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
- break ; \
- fi ; \
- if [ $$i = end ] ; then exit 1 ; fi ; \
- done
- cp $(BOOTIMAGE) $(obj)/isoimage/linux
- echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
- if [ -f '$(FDINITRD)' ] ; then \
- cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
- fi
- mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
- -no-emul-boot -boot-load-size 4 -boot-info-table \
- $(obj)/isoimage
- rm -rf $(obj)/isoimage
-
-zlilo: $(BOOTIMAGE)
- if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
- if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
- cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
- cp System.map $(INSTALL_PATH)/
- if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
+# The actual boot code is shared with i386 including the Makefile.
+# So tell kbuild that we fetch the code from i386 and include the
+# Makefile from i386 too.
-install:
- sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
+src := arch/i386/boot
+include $(src)/Makefile
+++ /dev/null
-/*
- * bootsect.S Copyright (C) 1991, 1992 Linus Torvalds
- *
- * modified by Drew Eckhardt
- * modified by Bruce Evans (bde)
- * modified by Chris Noe (May 1999) (as86 -> gas)
- * gutted by H. Peter Anvin (Jan 2003)
- *
- * BIG FAT NOTE: We're in real mode using 64k segments. Therefore segment
- * addresses must be multiplied by 16 to obtain their respective linear
- * addresses. To avoid confusion, linear addresses are written using leading
- * hex while segment addresses are written as segment:offset.
- *
- */
-
-#include <asm/boot.h>
-
-SETUPSECTS = 4 /* default nr of setup-sectors */
-BOOTSEG = 0x07C0 /* original address of boot-sector */
-INITSEG = DEF_INITSEG /* we move boot here - out of the way */
-SETUPSEG = DEF_SETUPSEG /* setup starts here */
-SYSSEG = DEF_SYSSEG /* system loaded at 0x10000 (65536) */
-SYSSIZE = DEF_SYSSIZE /* system size: # of 16-byte clicks */
- /* to be loaded */
-ROOT_DEV = 0 /* ROOT_DEV is now written by "build" */
-SWAP_DEV = 0 /* SWAP_DEV is now written by "build" */
-
-#ifndef SVGA_MODE
-#define SVGA_MODE ASK_VGA
-#endif
-
-#ifndef RAMDISK
-#define RAMDISK 0
-#endif
-
-#ifndef ROOT_RDONLY
-#define ROOT_RDONLY 1
-#endif
-
-.code16
-.text
-
-.global _start
-_start:
-
- # Normalize the start address
- jmpl $BOOTSEG, $start2
-
-start2:
- movw %cs, %ax
- movw %ax, %ds
- movw %ax, %es
- movw %ax, %ss
- movw $0x7c00, %sp
- sti
- cld
-
- movw $bugger_off_msg, %si
-
-msg_loop:
- lodsb
- andb %al, %al
- jz die
- movb $0xe, %ah
- movw $7, %bx
- int $0x10
- jmp msg_loop
-
-die:
- # Allow the user to press a key, then reboot
- xorw %ax, %ax
- int $0x16
- int $0x19
-
- # int 0x19 should never return. In case it does anyway,
- # invoke the BIOS reset code...
- ljmp $0xf000,$0xfff0
-
-
-bugger_off_msg:
- .ascii "Direct booting from floppy is no longer supported.\r\n"
- .ascii "Please use a boot loader program instead.\r\n"
- .ascii "\n"
- .ascii "Remove disk and press any key to reboot . . .\r\n"
- .byte 0
-
-
- # Kernel attributes; used by setup
-
- .org 497
-setup_sects: .byte SETUPSECTS
-root_flags: .word ROOT_RDONLY
-syssize: .word SYSSIZE
-swap_dev: .word SWAP_DEV
-ram_size: .word RAMDISK
-vid_mode: .word SVGA_MODE
-root_dev: .word ROOT_DEV
-boot_flag: .word 0xAA55
#
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o
-EXTRA_AFLAGS := -traditional
-# cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with
-# -m32
-CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin
+CFLAGS := -m64 -D__KERNEL__ $(LINUXINCLUDE) -O2 \
+ -fno-strict-aliasing -fPIC -mcmodel=small \
+ $(call cc-option, -ffreestanding) \
+ $(call cc-option, -fno-stack-protector)
+AFLAGS := $(CFLAGS) -D__ASSEMBLY__
LDFLAGS := -m elf_x86_64
LDFLAGS_vmlinux := -T
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
- * data at 0x34-0x3f are used as the stack for this calculation.
- * Only 4 bytes are needed.
+ * data at 0x1e4 (defined as a scratch field) are used as the stack
+ * for this calculation. Only 4 bytes are needed.
*/
- leal 0x40(%esi), %esp
+ leal (0x1e4+4)(%esi), %esp
call 1f
1: popl %ebp
subl $1b, %ebp
+++ /dev/null
-#!/bin/sh
-. $srctree/arch/i386/boot/install.sh
+++ /dev/null
-#
-# mtools configuration file for "make (b)zdisk"
-#
-
-# Actual floppy drive
-drive a:
- file="/dev/fd0"
-
-# 1.44 MB floppy disk image
-drive v:
- file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=18 filter
-
-# 2.88 MB floppy disk image (mostly for virtual uses)
-drive w:
- file="@OBJ@/fdimage" cylinders=80 heads=2 sectors=36 filter
-
-
+++ /dev/null
-/*
- * setup.S Copyright (C) 1991, 1992 Linus Torvalds
- *
- * setup.s is responsible for getting the system data from the BIOS,
- * and putting them into the appropriate places in system memory.
- * both setup.s and system has been loaded by the bootblock.
- *
- * This code asks the bios for memory/disk/other parameters, and
- * puts them in a "safe" place: 0x90000-0x901FF, ie where the
- * boot-block used to be. It is then up to the protected mode
- * system to read them from there before the area is overwritten
- * for buffer-blocks.
- *
- * Move PS/2 aux init code to psaux.c
- * (troyer@saifr00.cfsat.Honeywell.COM) 03Oct92
- *
- * some changes and additional features by Christoph Niemann,
- * March 1993/June 1994 (Christoph.Niemann@linux.org)
- *
- * add APM BIOS checking by Stephen Rothwell, May 1994
- * (sfr@canb.auug.org.au)
- *
- * High load stuff, initrd support and position independency
- * by Hans Lermen & Werner Almesberger, February 1996
- * <lermen@elserv.ffm.fgan.de>, <almesber@lrc.epfl.ch>
- *
- * Video handling moved to video.S by Martin Mares, March 1996
- * <mj@k332.feld.cvut.cz>
- *
- * Extended memory detection scheme retwiddled by orc@pell.chi.il.us (david
- * parsons) to avoid loadlin confusion, July 1997
- *
- * Transcribed from Intel (as86) -> AT&T (gas) by Chris Noe, May 1999.
- * <stiker@northlink.com>
- *
- * Fix to work around buggy BIOSes which don't use carry bit correctly
- * and/or report extended memory in CX/DX for e801h memory size detection
- * call. As a result the kernel got wrong figures. The int15/e801h docs
- * from Ralf Brown interrupt list seem to indicate AX/BX should be used
- * anyway. So to avoid breaking many machines (presumably there was a reason
- * to orginally use CX/DX instead of AX/BX), we do a kludge to see
- * if CX/DX have been changed in the e801 call and if so use AX/BX .
- * Michael Miller, April 2001 <michaelm@mjmm.org>
- *
- * Added long mode checking and SSE force. March 2003, Andi Kleen.
- */
-
-#include <asm/segment.h>
-#include <linux/utsrelease.h>
-#include <linux/compile.h>
-#include <asm/boot.h>
-#include <asm/e820.h>
-#include <asm/page.h>
-#include <asm/setup.h>
-
-/* Signature words to ensure LILO loaded us right */
-#define SIG1 0xAA55
-#define SIG2 0x5A5A
-
-INITSEG = DEF_INITSEG # 0x9000, we move boot here, out of the way
-SYSSEG = DEF_SYSSEG # 0x1000, system loaded at 0x10000 (65536).
-SETUPSEG = DEF_SETUPSEG # 0x9020, this is the current segment
- # ... and the former contents of CS
-
-DELTA_INITSEG = SETUPSEG - INITSEG # 0x0020
-
-.code16
-.globl begtext, begdata, begbss, endtext, enddata, endbss
-
-.text
-begtext:
-.data
-begdata:
-.bss
-begbss:
-.text
-
-start:
- jmp trampoline
-
-# This is the setup header, and it must start at %cs:2 (old 0x9020:2)
-
- .ascii "HdrS" # header signature
- .word 0x0206 # header version number (>= 0x0105)
- # or else old loadlin-1.5 will fail)
-realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
-start_sys_seg: .word SYSSEG
- .word kernel_version # pointing to kernel version string
- # above section of header is compatible
- # with loadlin-1.5 (header v1.5). Don't
- # change it.
-
-type_of_loader: .byte 0 # = 0, old one (LILO, Loadlin,
- # Bootlin, SYSLX, bootsect...)
- # See Documentation/i386/boot.txt for
- # assigned ids
-
-# flags, unused bits must be zero (RFU) bit within loadflags
-loadflags:
-LOADED_HIGH = 1 # If set, the kernel is loaded high
-CAN_USE_HEAP = 0x80 # If set, the loader also has set
- # heap_end_ptr to tell how much
- # space behind setup.S can be used for
- # heap purposes.
- # Only the loader knows what is free
-#ifndef __BIG_KERNEL__
- .byte 0
-#else
- .byte LOADED_HIGH
-#endif
-
-setup_move_size: .word 0x8000 # size to move, when setup is not
- # loaded at 0x90000. We will move setup
- # to 0x90000 then just before jumping
- # into the kernel. However, only the
- # loader knows how much data behind
- # us also needs to be loaded.
-
-code32_start: # here loaders can put a different
- # start address for 32-bit code.
-#ifndef __BIG_KERNEL__
- .long 0x1000 # 0x1000 = default for zImage
-#else
- .long 0x100000 # 0x100000 = default for big kernel
-#endif
-
-ramdisk_image: .long 0 # address of loaded ramdisk image
- # Here the loader puts the 32-bit
- # address where it loaded the image.
- # This only will be read by the kernel.
-
-ramdisk_size: .long 0 # its size in bytes
-
-bootsect_kludge:
- .long 0 # obsolete
-
-heap_end_ptr: .word modelist+1024 # (Header version 0x0201 or later)
- # space from here (exclusive) down to
- # end of setup code can be used by setup
- # for local heap purposes.
-
-pad1: .word 0
-cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
- # If nonzero, a 32-bit pointer
- # to the kernel command line.
- # The command line should be
- # located between the start of
- # setup and the end of low
- # memory (0xa0000), or it may
- # get overwritten before it
- # gets read. If this field is
- # used, there is no longer
- # anything magical about the
- # 0x90000 segment; the setup
- # can be located anywhere in
- # low memory 0x10000 or higher.
-
-ramdisk_max: .long 0xffffffff
-kernel_alignment: .long 0x200000 # physical addr alignment required for
- # protected mode relocatable kernel
-#ifdef CONFIG_RELOCATABLE
-relocatable_kernel: .byte 1
-#else
-relocatable_kernel: .byte 0
-#endif
-pad2: .byte 0
-pad3: .word 0
-
-cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
- #added with boot protocol
- #version 2.06
-
-trampoline: call start_of_setup
- .align 16
- # The offset at this point is 0x240
- .space (0xeff-0x240+1) # E820 & EDD space (ending at 0xeff)
-# End of setup header #####################################################
-
-start_of_setup:
-# Bootlin depends on this being done early
- movw $0x01500, %ax
- movb $0x81, %dl
- int $0x13
-
-#ifdef SAFE_RESET_DISK_CONTROLLER
-# Reset the disk controller.
- movw $0x0000, %ax
- movb $0x80, %dl
- int $0x13
-#endif
-
-# Set %ds = %cs, we know that SETUPSEG = %cs at this point
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
-# Check signature at end of setup
- cmpw $SIG1, setup_sig1
- jne bad_sig
-
- cmpw $SIG2, setup_sig2
- jne bad_sig
-
- jmp good_sig1
-
-# Routine to print asciiz string at ds:si
-prtstr:
- lodsb
- andb %al, %al
- jz fin
-
- call prtchr
- jmp prtstr
-
-fin: ret
-
-# Space printing
-prtsp2: call prtspc # Print double space
-prtspc: movb $0x20, %al # Print single space (note: fall-thru)
-
-prtchr:
- pushw %ax
- pushw %cx
- movw $0007,%bx
- movw $0x01, %cx
- movb $0x0e, %ah
- int $0x10
- popw %cx
- popw %ax
- ret
-
-beep: movb $0x07, %al
- jmp prtchr
-
-no_sig_mess: .string "No setup signature found ..."
-
-good_sig1:
- jmp good_sig
-
-# We now have to find the rest of the setup code/data
-bad_sig:
- movw %cs, %ax # SETUPSEG
- subw $DELTA_INITSEG, %ax # INITSEG
- movw %ax, %ds
- xorb %bh, %bh
- movb (497), %bl # get setup sect from bootsect
- subw $4, %bx # LILO loads 4 sectors of setup
- shlw $8, %bx # convert to words (1sect=2^8 words)
- movw %bx, %cx
- shrw $3, %bx # convert to segment
- addw $SYSSEG, %bx
- movw %bx, %cs:start_sys_seg
-# Move rest of setup code/data to here
- movw $2048, %di # four sectors loaded by LILO
- subw %si, %si
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %es
- movw $SYSSEG, %ax
- movw %ax, %ds
- rep
- movsw
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
- cmpw $SIG1, setup_sig1
- jne no_sig
-
- cmpw $SIG2, setup_sig2
- jne no_sig
-
- jmp good_sig
-
-no_sig:
- lea no_sig_mess, %si
- call prtstr
-
-no_sig_loop:
- jmp no_sig_loop
-
-good_sig:
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
-# Check if an old loader tries to load a big-kernel
- testb $LOADED_HIGH, %cs:loadflags # Do we have a big kernel?
- jz loader_ok # No, no danger for old loaders.
-
- cmpb $0, %cs:type_of_loader # Do we have a loader that
- # can deal with us?
- jnz loader_ok # Yes, continue.
-
- pushw %cs # No, we have an old loader,
- popw %ds # die.
- lea loader_panic_mess, %si
- call prtstr
-
- jmp no_sig_loop
-
-loader_panic_mess: .string "Wrong loader, giving up..."
-
-loader_ok:
- /* check for long mode. */
- /* we have to do this before the VESA setup, otherwise the user
- can't see the error message. */
-
- pushw %ds
- movw %cs,%ax
- movw %ax,%ds
-
- call verify_cpu
- testl %eax,%eax
- jz sse_ok
-
-no_longmode:
- call beep
- lea long_mode_panic,%si
- call prtstr
-no_longmode_loop:
- jmp no_longmode_loop
-long_mode_panic:
- .string "Your CPU does not support long mode. Use a 32bit distribution."
- .byte 0
-
-#include "../kernel/verify_cpu.S"
-sse_ok:
- popw %ds
-
-# tell BIOS we want to go to long mode
- movl $0xec00,%eax # declare target operating mode
- movl $2,%ebx # long mode
- int $0x15
-
-# Get memory size (extended mem, kB)
-
- xorl %eax, %eax
- movl %eax, (0x1e0)
-#ifndef STANDARD_MEMORY_BIOS_CALL
- movb %al, (E820NR)
-# Try three different memory detection schemes. First, try
-# e820h, which lets us assemble a memory map, then try e801h,
-# which returns a 32-bit memory size, and finally 88h, which
-# returns 0-64m
-
-# method E820H:
-# the memory map from hell. e820h returns memory classified into
-# a whole bunch of different types, and allows memory holes and
-# everything. We scan through this memory map and build a list
-# of the first 32 memory areas, which we return at [E820MAP].
-# This is documented at http://www.acpi.info/, in the ACPI 2.0 specification.
-
-#define SMAP 0x534d4150
-
-meme820:
- xorl %ebx, %ebx # continuation counter
- movw $E820MAP, %di # point into the whitelist
- # so we can have the bios
- # directly write into it.
-
-jmpe820:
- movl $0x0000e820, %eax # e820, upper word zeroed
- movl $SMAP, %edx # ascii 'SMAP'
- movl $20, %ecx # size of the e820rec
- pushw %ds # data record.
- popw %es
- int $0x15 # make the call
- jc bail820 # fall to e801 if it fails
-
- cmpl $SMAP, %eax # check the return is `SMAP'
- jne bail820 # fall to e801 if it fails
-
-# cmpl $1, 16(%di) # is this usable memory?
-# jne again820
-
- # If this is usable memory, we save it by simply advancing %di by
- # sizeof(e820rec).
- #
-good820:
- movb (E820NR), %al # up to 128 entries
- cmpb $E820MAX, %al
- jae bail820
-
- incb (E820NR)
- movw %di, %ax
- addw $20, %ax
- movw %ax, %di
-again820:
- cmpl $0, %ebx # check to see if
- jne jmpe820 # %ebx is set to EOF
-bail820:
-
-
-# method E801H:
-# memory size is in 1k chunksizes, to avoid confusing loadlin.
-# we store the 0xe801 memory size in a completely different place,
-# because it will most likely be longer than 16 bits.
-# (use 1e0 because that's what Larry Augustine uses in his
-# alternative new memory detection scheme, and it's sensible
-# to write everything into the same place.)
-
-meme801:
- stc # fix to work around buggy
- xorw %cx,%cx # BIOSes which don't clear/set
- xorw %dx,%dx # carry on pass/error of
- # e801h memory size call
- # or merely pass cx,dx though
- # without changing them.
- movw $0xe801, %ax
- int $0x15
- jc mem88
-
- cmpw $0x0, %cx # Kludge to handle BIOSes
- jne e801usecxdx # which report their extended
- cmpw $0x0, %dx # memory in AX/BX rather than
- jne e801usecxdx # CX/DX. The spec I have read
- movw %ax, %cx # seems to indicate AX/BX
- movw %bx, %dx # are more reasonable anyway...
-
-e801usecxdx:
- andl $0xffff, %edx # clear sign extend
- shll $6, %edx # and go from 64k to 1k chunks
- movl %edx, (0x1e0) # store extended memory size
- andl $0xffff, %ecx # clear sign extend
- addl %ecx, (0x1e0) # and add lower memory into
- # total size.
-
-# Ye Olde Traditional Methode. Returns the memory size (up to 16mb or
-# 64mb, depending on the bios) in ax.
-mem88:
-
-#endif
- movb $0x88, %ah
- int $0x15
- movw %ax, (2)
-
-# Set the keyboard repeat rate to the max
- movw $0x0305, %ax
- xorw %bx, %bx
- int $0x16
-
-# Check for video adapter and its parameters and allow the
-# user to browse video modes.
- call video # NOTE: we need %ds pointing
- # to bootsector
-
-# Get hd0 data...
- xorw %ax, %ax
- movw %ax, %ds
- ldsw (4 * 0x41), %si
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- pushw %ax
- movw %ax, %es
- movw $0x0080, %di
- movw $0x10, %cx
- pushw %cx
- cld
- rep
- movsb
-# Get hd1 data...
- xorw %ax, %ax
- movw %ax, %ds
- ldsw (4 * 0x46), %si
- popw %cx
- popw %es
- movw $0x0090, %di
- rep
- movsb
-# Check that there IS a hd1 :-)
- movw $0x01500, %ax
- movb $0x81, %dl
- int $0x13
- jc no_disk1
-
- cmpb $3, %ah
- je is_disk1
-
-no_disk1:
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %es
- movw $0x0090, %di
- movw $0x10, %cx
- xorw %ax, %ax
- cld
- rep
- stosb
-is_disk1:
-
-# Check for PS/2 pointing device
- movw %cs, %ax # aka SETUPSEG
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ax, %ds
- movb $0, (0x1ff) # default is no pointing device
- int $0x11 # int 0x11: equipment list
- testb $0x04, %al # check if mouse installed
- jz no_psmouse
-
- movb $0xAA, (0x1ff) # device present
-no_psmouse:
-
-#include "../../i386/boot/edd.S"
-
-# Now we want to move to protected mode ...
- cmpw $0, %cs:realmode_swtch
- jz rmodeswtch_normal
-
- lcall *%cs:realmode_swtch
-
- jmp rmodeswtch_end
-
-rmodeswtch_normal:
- pushw %cs
- call default_switch
-
-rmodeswtch_end:
-# we get the code32 start address and modify the below 'jmpi'
-# (loader may have changed it)
- movl %cs:code32_start, %eax
- movl %eax, %cs:code32
-
-# Now we move the system to its rightful place ... but we check if we have a
-# big-kernel. In that case we *must* not move it ...
- testb $LOADED_HIGH, %cs:loadflags
- jz do_move0 # .. then we have a normal low
- # loaded zImage
- # .. or else we have a high
- # loaded bzImage
- jmp end_move # ... and we skip moving
-
-do_move0:
- movw $0x100, %ax # start of destination segment
- movw %cs, %bp # aka SETUPSEG
- subw $DELTA_INITSEG, %bp # aka INITSEG
- movw %cs:start_sys_seg, %bx # start of source segment
- cld
-do_move:
- movw %ax, %es # destination segment
- incb %ah # instead of add ax,#0x100
- movw %bx, %ds # source segment
- addw $0x100, %bx
- subw %di, %di
- subw %si, %si
- movw $0x800, %cx
- rep
- movsw
- cmpw %bp, %bx # assume start_sys_seg > 0x200,
- # so we will perhaps read one
- # page more than needed, but
- # never overwrite INITSEG
- # because destination is a
- # minimum one page below source
- jb do_move
-
-end_move:
-# then we load the segment descriptors
- movw %cs, %ax # aka SETUPSEG
- movw %ax, %ds
-
-# Check whether we need to be downward compatible with version <=201
- cmpl $0, cmd_line_ptr
- jne end_move_self # loader uses version >=202 features
- cmpb $0x20, type_of_loader
- je end_move_self # bootsect loader, we know of it
-
-# Boot loader doesnt support boot protocol version 2.02.
-# If we have our code not at 0x90000, we need to move it there now.
-# We also then need to move the params behind it (commandline)
-# Because we would overwrite the code on the current IP, we move
-# it in two steps, jumping high after the first one.
- movw %cs, %ax
- cmpw $SETUPSEG, %ax
- je end_move_self
-
- cli # make sure we really have
- # interrupts disabled !
- # because after this the stack
- # should not be used
- subw $DELTA_INITSEG, %ax # aka INITSEG
- movw %ss, %dx
- cmpw %ax, %dx
- jb move_self_1
-
- addw $INITSEG, %dx
- subw %ax, %dx # this will go into %ss after
- # the move
-move_self_1:
- movw %ax, %ds
- movw $INITSEG, %ax # real INITSEG
- movw %ax, %es
- movw %cs:setup_move_size, %cx
- std # we have to move up, so we use
- # direction down because the
- # areas may overlap
- movw %cx, %di
- decw %di
- movw %di, %si
- subw $move_self_here+0x200, %cx
- rep
- movsb
- ljmp $SETUPSEG, $move_self_here
-
-move_self_here:
- movw $move_self_here+0x200, %cx
- rep
- movsb
- movw $SETUPSEG, %ax
- movw %ax, %ds
- movw %dx, %ss
-end_move_self: # now we are at the right place
- lidt idt_48 # load idt with 0,0
- xorl %eax, %eax # Compute gdt_base
- movw %ds, %ax # (Convert %ds:gdt to a linear ptr)
- shll $4, %eax
- addl $gdt, %eax
- movl %eax, (gdt_48+2)
- lgdt gdt_48 # load gdt with whatever is
- # appropriate
-
-# that was painless, now we enable a20
- call empty_8042
-
- movb $0xD1, %al # command write
- outb %al, $0x64
- call empty_8042
-
- movb $0xDF, %al # A20 on
- outb %al, $0x60
- call empty_8042
-
-#
-# You must preserve the other bits here. Otherwise embarrasing things
-# like laptops powering off on boot happen. Corrected version by Kira
-# Brown from Linux 2.2
-#
- inb $0x92, %al #
- orb $02, %al # "fast A20" version
- outb %al, $0x92 # some chips have only this
-
-# wait until a20 really *is* enabled; it can take a fair amount of
-# time on certain systems; Toshiba Tecras are known to have this
-# problem. The memory location used here (0x200) is the int 0x80
-# vector, which should be safe to use.
-
- xorw %ax, %ax # segment 0x0000
- movw %ax, %fs
- decw %ax # segment 0xffff (HMA)
- movw %ax, %gs
-a20_wait:
- incw %ax # unused memory location <0xfff0
- movw %ax, %fs:(0x200) # we use the "int 0x80" vector
- cmpw %gs:(0x210), %ax # and its corresponding HMA addr
- je a20_wait # loop until no longer aliased
-
-# make sure any possible coprocessor is properly reset..
- xorw %ax, %ax
- outb %al, $0xf0
- call delay
-
- outb %al, $0xf1
- call delay
-
-# well, that went ok, I hope. Now we mask all interrupts - the rest
-# is done in init_IRQ().
- movb $0xFF, %al # mask all interrupts for now
- outb %al, $0xA1
- call delay
-
- movb $0xFB, %al # mask all irq's but irq2 which
- outb %al, $0x21 # is cascaded
-
-# Well, that certainly wasn't fun :-(. Hopefully it works, and we don't
-# need no steenking BIOS anyway (except for the initial loading :-).
-# The BIOS-routine wants lots of unnecessary data, and it's less
-# "interesting" anyway. This is how REAL programmers do it.
-#
-# Well, now's the time to actually move into protected mode. To make
-# things as simple as possible, we do no register set-up or anything,
-# we let the gnu-compiled 32-bit programs do that. We just jump to
-# absolute address 0x1000 (or the loader supplied one),
-# in 32-bit protected mode.
-#
-# Note that the short jump isn't strictly needed, although there are
-# reasons why it might be a good idea. It won't hurt in any case.
- movw $1, %ax # protected mode (PE) bit
- lmsw %ax # This is it!
- jmp flush_instr
-
-flush_instr:
- xorw %bx, %bx # Flag to indicate a boot
- xorl %esi, %esi # Pointer to real-mode code
- movw %cs, %si
- subw $DELTA_INITSEG, %si
- shll $4, %esi # Convert to 32-bit pointer
-# NOTE: For high loaded big kernels we need a
-# jmpi 0x100000,__KERNEL_CS
-#
-# but we yet haven't reloaded the CS register, so the default size
-# of the target offset still is 16 bit.
-# However, using an operand prefix (0x66), the CPU will properly
-# take our 48 bit far pointer. (INTeL 80386 Programmer's Reference
-# Manual, Mixing 16-bit and 32-bit code, page 16-6)
-
- .byte 0x66, 0xea # prefix + jmpi-opcode
-code32: .long 0x1000 # will be set to 0x100000
- # for big kernels
- .word __KERNEL_CS
-
-# Here's a bunch of information about your current kernel..
-kernel_version: .ascii UTS_RELEASE
- .ascii " ("
- .ascii LINUX_COMPILE_BY
- .ascii "@"
- .ascii LINUX_COMPILE_HOST
- .ascii ") "
- .ascii UTS_VERSION
- .byte 0
-
-# This is the default real mode switch routine.
-# to be called just before protected mode transition
-default_switch:
- cli # no interrupts allowed !
- movb $0x80, %al # disable NMI for bootup
- # sequence
- outb %al, $0x70
- lret
-
-
-# This routine checks that the keyboard command queue is empty
-# (after emptying the output buffers)
-#
-# Some machines have delusions that the keyboard buffer is always full
-# with no keyboard attached...
-#
-# If there is no keyboard controller, we will usually get 0xff
-# to all the reads. With each IO taking a microsecond and
-# a timeout of 100,000 iterations, this can take about half a
-# second ("delay" == outb to port 0x80). That should be ok,
-# and should also be plenty of time for a real keyboard controller
-# to empty.
-#
-
-empty_8042:
- pushl %ecx
- movl $100000, %ecx
-
-empty_8042_loop:
- decl %ecx
- jz empty_8042_end_loop
-
- call delay
-
- inb $0x64, %al # 8042 status port
- testb $1, %al # output buffer?
- jz no_output
-
- call delay
- inb $0x60, %al # read it
- jmp empty_8042_loop
-
-no_output:
- testb $2, %al # is input buffer full?
- jnz empty_8042_loop # yes - loop
-empty_8042_end_loop:
- popl %ecx
- ret
-
-# Read the cmos clock. Return the seconds in al
-gettime:
- pushw %cx
- movb $0x02, %ah
- int $0x1a
- movb %dh, %al # %dh contains the seconds
- andb $0x0f, %al
- movb %dh, %ah
- movb $0x04, %cl
- shrb %cl, %ah
- aad
- popw %cx
- ret
-
-# Delay is needed after doing I/O
-delay:
- outb %al,$0x80
- ret
-
-# Descriptor tables
-gdt:
- .word 0, 0, 0, 0 # dummy
-
- .word 0, 0, 0, 0 # unused
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9A00 # code read/exec
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-
- .word 0xFFFF # 4Gb - (0x100000*0x1000 = 4Gb)
- .word 0 # base address = 0
- .word 0x9200 # data read/write
- .word 0x00CF # granularity = 4096, 386
- # (+5th nibble of limit)
-gdt_end:
-idt_48:
- .word 0 # idt limit = 0
- .word 0, 0 # idt base = 0L
-gdt_48:
- .word gdt_end-gdt-1 # gdt limit
- .word 0, 0 # gdt base (filled in later)
-
-# Include video setup & detection code
-
-#include "../../i386/boot/video.S"
-
-# Setup signature -- must be last
-setup_sig1: .word SIG1
-setup_sig2: .word SIG2
-
-# After this point, there is some free space which is used by the video mode
-# handling code to store the temporary mode table (not used by the kernel).
-
-modelist:
-
-.text
-endtext:
-.data
-enddata:
-.bss
-endbss:
+++ /dev/null
-/*
- * Copyright (C) 1991, 1992 Linus Torvalds
- * Copyright (C) 1997 Martin Mares
- */
-
-/*
- * This file builds a disk-image from three different files:
- *
- * - bootsect: compatibility mbr which prints an error message if
- * someone tries to boot the kernel directly.
- * - setup: 8086 machine code, sets up system parm
- * - system: 80386 code for actual system
- *
- * It does some checking that all files are of the correct type, and
- * just writes the result to stdout, removing headers and padding to
- * the right amount. It also writes some system data to stderr.
- */
-
-/*
- * Changes by tytso to allow root device specification
- * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
- * Cross compiling fixes by Gertjan van Wingerde, July 1996
- * Rewritten by Martin Mares, April 1997
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-#include <stdarg.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/sysmacros.h>
-#include <unistd.h>
-#include <fcntl.h>
-#include <asm/boot.h>
-
-typedef unsigned char byte;
-typedef unsigned short word;
-typedef unsigned long u32;
-
-#define DEFAULT_MAJOR_ROOT 0
-#define DEFAULT_MINOR_ROOT 0
-
-/* Minimal number of setup sectors (see also bootsect.S) */
-#define SETUP_SECTS 4
-
-byte buf[1024];
-int fd;
-int is_big_kernel;
-
-void die(const char * str, ...)
-{
- va_list args;
- va_start(args, str);
- vfprintf(stderr, str, args);
- fputc('\n', stderr);
- exit(1);
-}
-
-void file_open(const char *name)
-{
- if ((fd = open(name, O_RDONLY, 0)) < 0)
- die("Unable to open `%s': %m", name);
-}
-
-void usage(void)
-{
- die("Usage: build [-b] bootsect setup system [rootdev] [> image]");
-}
-
-int main(int argc, char ** argv)
-{
- unsigned int i, c, sz, setup_sectors;
- u32 sys_size;
- byte major_root, minor_root;
- struct stat sb;
-
- if (argc > 2 && !strcmp(argv[1], "-b"))
- {
- is_big_kernel = 1;
- argc--, argv++;
- }
- if ((argc < 4) || (argc > 5))
- usage();
- if (argc > 4) {
- if (!strcmp(argv[4], "CURRENT")) {
- if (stat("/", &sb)) {
- perror("/");
- die("Couldn't stat /");
- }
- major_root = major(sb.st_dev);
- minor_root = minor(sb.st_dev);
- } else if (strcmp(argv[4], "FLOPPY")) {
- if (stat(argv[4], &sb)) {
- perror(argv[4]);
- die("Couldn't stat root device.");
- }
- major_root = major(sb.st_rdev);
- minor_root = minor(sb.st_rdev);
- } else {
- major_root = 0;
- minor_root = 0;
- }
- } else {
- major_root = DEFAULT_MAJOR_ROOT;
- minor_root = DEFAULT_MINOR_ROOT;
- }
- fprintf(stderr, "Root device is (%d, %d)\n", major_root, minor_root);
-
- file_open(argv[1]);
- i = read(fd, buf, sizeof(buf));
- fprintf(stderr,"Boot sector %d bytes.\n",i);
- if (i != 512)
- die("Boot block must be exactly 512 bytes");
- if (buf[510] != 0x55 || buf[511] != 0xaa)
- die("Boot block hasn't got boot flag (0xAA55)");
- buf[508] = minor_root;
- buf[509] = major_root;
- if (write(1, buf, 512) != 512)
- die("Write call failed");
- close (fd);
-
- file_open(argv[2]); /* Copy the setup code */
- for (i=0 ; (c=read(fd, buf, sizeof(buf)))>0 ; i+=c )
- if (write(1, buf, c) != c)
- die("Write call failed");
- if (c != 0)
- die("read-error on `setup'");
- close (fd);
-
- setup_sectors = (i + 511) / 512; /* Pad unused space with zeros */
- /* for compatibility with ancient versions of LILO. */
- if (setup_sectors < SETUP_SECTS)
- setup_sectors = SETUP_SECTS;
- fprintf(stderr, "Setup is %d bytes.\n", i);
- memset(buf, 0, sizeof(buf));
- while (i < setup_sectors * 512) {
- c = setup_sectors * 512 - i;
- if (c > sizeof(buf))
- c = sizeof(buf);
- if (write(1, buf, c) != c)
- die("Write call failed");
- i += c;
- }
-
- file_open(argv[3]);
- if (fstat (fd, &sb))
- die("Unable to stat `%s': %m", argv[3]);
- sz = sb.st_size;
- fprintf (stderr, "System is %d kB\n", sz/1024);
- sys_size = (sz + 15) / 16;
- if (!is_big_kernel && sys_size > DEF_SYSSIZE)
- die("System is too big. Try using bzImage or modules.");
- while (sz > 0) {
- int l, n;
-
- l = (sz > sizeof(buf)) ? sizeof(buf) : sz;
- if ((n=read(fd, buf, l)) != l) {
- if (n < 0)
- die("Error reading %s: %m", argv[3]);
- else
- die("%s: Unexpected EOF", argv[3]);
- }
- if (write(1, buf, l) != l)
- die("Write failed");
- sz -= l;
- }
- close(fd);
-
- if (lseek(1, 497, SEEK_SET) != 497) /* Write sizes to the bootsector */
- die("Output: seek failed");
- buf[0] = setup_sectors;
- if (write(1, buf, 1) != 1)
- die("Write of setup sector count failed");
- if (lseek(1, 500, SEEK_SET) != 500)
- die("Output: seek failed");
- buf[0] = (sys_size & 0xff);
- buf[1] = ((sys_size >> 8) & 0xff);
- buf[2] = ((sys_size >> 16) & 0xff);
- buf[3] = ((sys_size >> 24) & 0xff);
- if (write(1, buf, 4) != 4)
- die("Write of image length failed");
-
- return 0; /* Everything is OK */
-}
obj-y += topology.o
obj-y += intel_cacheinfo.o
+obj-y += addon_cpuid_features.o
obj-y += pcspeaker.o
CFLAGS_vsyscall.o := $(PROFILING) -g0
topology-y += ../../i386/kernel/topology.o
microcode-$(subst m,y,$(CONFIG_MICROCODE)) += ../../i386/kernel/microcode.o
intel_cacheinfo-y += ../../i386/kernel/cpu/intel_cacheinfo.o
+addon_cpuid_features-y += ../../i386/kernel/cpu/addon_cpuid_features.o
quirks-y += ../../i386/kernel/quirks.o
i8237-y += ../../i386/kernel/i8237.o
msr-$(subst m,y,$(CONFIG_X86_MSR)) += ../../i386/kernel/msr.o
int iommu_bio_merge __read_mostly = 0;
EXPORT_SYMBOL(iommu_bio_merge);
-int iommu_sac_force __read_mostly = 0;
-EXPORT_SYMBOL(iommu_sac_force);
+static int iommu_sac_force __read_mostly = 0;
int no_iommu __read_mostly;
#ifdef CONFIG_IOMMU_DEBUG
c->x86_capability[2] = cpuid_edx(0x80860001);
}
+ init_scattered_cpuid_features(c);
+
c->apicid = phys_pkg_id(0);
/*
"fpu", "vme", "de", "pse", "tsc", "msr", "pae", "mce",
"cx8", "apic", NULL, "sep", "mtrr", "pge", "mca", "cmov",
"pat", "pse36", "pn", "clflush", NULL, "dts", "acpi", "mmx",
- "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", NULL,
+ "fxsr", "sse", "sse2", "ss", "ht", "tm", "ia64", "pbe",
/* AMD-defined */
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Other (Linux-defined) */
- "cxmmx", NULL, "cyrix_arr", "centaur_mcr", NULL,
- "constant_tsc", NULL, NULL,
- "up", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "cxmmx", "k6_mtrr", "cyrix_arr", "centaur_mcr",
+ NULL, NULL, NULL, NULL,
+ "constant_tsc", "up", NULL, "arch_perfmon",
+ "pebs", "bts", NULL, "sync_rdtsc",
+ "rep_good", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
/* Intel-defined (#2) */
/* VIA/Cyrix/Centaur-defined */
NULL, NULL, "rng", "rng_en", NULL, NULL, "ace", "ace_en",
- NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ "ace2", "ace2_en", "phe", "phe_en", "pmm", "pmm_en", NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
"osvw", "ibs", NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+
+ /* Auxiliary (Linux-defined) */
+ "ida", NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
+ NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
};
static char *x86_power_flags[] = {
"ts", /* temperature sensor */
pushl $0 # Kill any dangerous flags
popfl
- /* minimum CPUID flags for x86-64 as defined by AMD */
-#define M(x) (1<<(x))
-#define M2(a,b) M(a)|M(b)
-#define M4(a,b,c,d) M(a)|M(b)|M(c)|M(d)
-
-#define SSE_MASK \
- (M2(X86_FEATURE_XMM,X86_FEATURE_XMM2))
-#define REQUIRED_MASK1 \
- (M4(X86_FEATURE_FPU,X86_FEATURE_PSE,X86_FEATURE_TSC,X86_FEATURE_MSR)|\
- M4(X86_FEATURE_PAE,X86_FEATURE_CX8,X86_FEATURE_PGE,X86_FEATURE_CMOV)|\
- M(X86_FEATURE_FXSR))
-#define REQUIRED_MASK2 \
- (M(X86_FEATURE_LM - 32))
-
pushfl # standard way to check for cpuid
popl %eax
movl %eax,%ebx
verify_cpu_noamd:
movl $0x1,%eax # Does the cpu have what it takes
cpuid
- andl $REQUIRED_MASK1,%edx
- xorl $REQUIRED_MASK1,%edx
+ andl $REQUIRED_MASK0,%edx
+ xorl $REQUIRED_MASK0,%edx
jnz verify_cpu_no_longmode
movl $0x80000000,%eax # See if extended cpuid is implemented
movl $0x80000001,%eax # Does the cpu have what it takes
cpuid
- andl $REQUIRED_MASK2,%edx
- xorl $REQUIRED_MASK2,%edx
+ andl $REQUIRED_MASK1,%edx
+ xorl $REQUIRED_MASK1,%edx
jnz verify_cpu_no_longmode
verify_cpu_sse_test:
static int acpi_processor_errata_piix4(struct pci_dev *dev)
{
- u8 rev = 0;
u8 value1 = 0;
u8 value2 = 0;
* Note that 'dev' references the PIIX4 ACPI Controller.
*/
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- switch (rev) {
+ switch (dev->revision) {
case 0:
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Found PIIX4 A-step\n"));
break;
break;
}
- switch (rev) {
+ switch (dev->revision) {
case 0: /* PIIX4 A-step */
case 1: /* PIIX4 B-step */
If unsure, say N.
config PATA_HPT3X3
- tristate "HPT 343/363 PATA support (Experimental)"
+ tristate "HPT 343/363 PATA support"
depends on PCI
help
This option enables support for the HPT 343/363
If unsure, say N.
+config PATA_HPT3X3_DMA
+ bool "HPT 343/363 DMA support (Experimental)"
+ depends on PATA_HPT3X3
+ help
+ This option enables DMA support for the HPT343/363
+ controllers. Enable with care as there are still some
+ problems with DMA on this chipset.
+
config PATA_ISAPNP
tristate "ISA Plug and Play PATA support (Experimental)"
depends on EXPERIMENTAL && ISAPNP
*/
.map = {
/* PM PS SM SS MAP */
- { P0, P2, RV, RV }, /* 00b */
+ { P0, P2, NA, NA }, /* 00b */
{ IDE, IDE, P1, P3 }, /* 01b */
{ P0, P2, IDE, IDE }, /* 10b */
{ RV, RV, RV, RV },
{
struct pci_dev *pdev = NULL;
u16 cfg;
- u8 rev;
int no_piix_dma = 0;
while((pdev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev)) != NULL)
{
/* Look for 450NX PXB. Check for problem configurations
A PCI quirk checks bit 6 already */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_word(pdev, 0x41, &cfg);
/* Only on the original revision: IDE DMA can hang */
- if (rev == 0x00)
+ if (pdev->revision == 0x00)
no_piix_dma = 1;
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
- else if (cfg & (1<<14) && rev < 5)
+ else if (cfg & (1<<14) && pdev->revision < 5)
no_piix_dma = 2;
}
if (no_piix_dma)
u16 heads, u16 sectors);
static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
static void ata_dev_xfermask(struct ata_device *dev);
+static unsigned long ata_dev_blacklisted(const struct ata_device *dev);
unsigned int ata_print_id = 1;
static struct workqueue_struct *ata_wq;
void ata_port_queue_task(struct ata_port *ap, work_func_t fn, void *data,
unsigned long delay)
{
- int rc;
-
- if (ap->pflags & ATA_PFLAG_FLUSH_PORT_TASK)
- return;
-
PREPARE_DELAYED_WORK(&ap->port_task, fn);
ap->port_task_data = data;
- rc = queue_delayed_work(ata_wq, &ap->port_task, delay);
-
- /* rc == 0 means that another user is using port task */
- WARN_ON(rc == 0);
+ /* may fail if ata_port_flush_task() in progress */
+ queue_delayed_work(ata_wq, &ap->port_task, delay);
}
/**
*/
void ata_port_flush_task(struct ata_port *ap)
{
- unsigned long flags;
-
DPRINTK("ENTER\n");
- spin_lock_irqsave(ap->lock, flags);
- ap->pflags |= ATA_PFLAG_FLUSH_PORT_TASK;
- spin_unlock_irqrestore(ap->lock, flags);
-
- DPRINTK("flush #1\n");
- cancel_work_sync(&ap->port_task.work); /* akpm: seems unneeded */
-
- /*
- * At this point, if a task is running, it's guaranteed to see
- * the FLUSH flag; thus, it will never queue pio tasks again.
- * Cancel and flush.
- */
- if (!cancel_delayed_work(&ap->port_task)) {
- if (ata_msg_ctl(ap))
- ata_port_printk(ap, KERN_DEBUG, "%s: flush #2\n",
- __FUNCTION__);
- cancel_work_sync(&ap->port_task.work);
- }
-
- spin_lock_irqsave(ap->lock, flags);
- ap->pflags &= ~ATA_PFLAG_FLUSH_PORT_TASK;
- spin_unlock_irqrestore(ap->lock, flags);
+ cancel_rearming_delayed_work(&ap->port_task);
if (ata_msg_ctl(ap))
ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __FUNCTION__);
desc[0] = '\0';
return;
}
- if (ata_device_blacklisted(dev) & ATA_HORKAGE_NONCQ) {
+ if (dev->horkage & ATA_HORKAGE_NONCQ) {
snprintf(desc, desc_sz, "NCQ (not used)");
return;
}
if (ata_msg_probe(ap))
ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __FUNCTION__);
+ /* set horkage */
+ dev->horkage |= ata_dev_blacklisted(dev);
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
dev->max_sectors = ATA_MAX_SECTORS;
}
- if (ata_device_blacklisted(dev) & ATA_HORKAGE_MAX_SEC_128)
+ if (dev->horkage & ATA_HORKAGE_MAX_SEC_128)
dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
dev->max_sectors);
if ((slave_possible) && (err != 0x81))
ap->device[1].class = ata_dev_try_classify(ap, 1, &err);
- /* re-enable interrupts */
- ap->ops->irq_on(ap);
-
/* is double-select really necessary? */
if (ap->device[1].class != ATA_DEV_NONE)
ap->ops->dev_select(ap, 1);
if (sata_scr_read(ap, SCR_ERROR, &serror) == 0)
sata_scr_write(ap, SCR_ERROR, serror);
- /* re-enable interrupts */
- if (!ap->ops->error_handler)
- ap->ops->irq_on(ap);
-
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
ap->ops->dev_select(ap, 1);
{ "SAMSUNG CD-ROM SN-124","N001", ATA_HORKAGE_NODMA },
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
{ "IOMEGA ZIP 250 ATAPI", NULL, ATA_HORKAGE_NODMA }, /* temporary fix */
+ { "IOMEGA ZIP 250 ATAPI Floppy",
+ NULL, ATA_HORKAGE_NODMA },
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
{ "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
/* NCQ is broken */
{ "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ },
+ { "Maxtor 6B200M0", "BANC1BM0", ATA_HORKAGE_NONCQ },
{ "Maxtor 6B200M0", "BANC1B10", ATA_HORKAGE_NONCQ },
+ { "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI",
+ ATA_HORKAGE_NONCQ },
/* NCQ hard hangs device under heavier load, needs hard power cycle */
{ "Maxtor 6B250S0", "BANC1B70", ATA_HORKAGE_NONCQ },
/* Blacklist entries taken from Silicon Image 3124/3132
{ "HTS541612J9SA00", "SBDIC7JP", ATA_HORKAGE_NONCQ, },
{ "Hitachi HTS541616J9SA00", "SB4OC70P", ATA_HORKAGE_NONCQ, },
{ "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, },
+ { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, },
/* Devices with NCQ limits */
{ }
};
-unsigned long ata_device_blacklisted(const struct ata_device *dev)
+static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
{
unsigned char model_num[ATA_ID_PROD_LEN + 1];
unsigned char model_rev[ATA_ID_FW_REV_LEN + 1];
if ((dev->ap->flags & ATA_FLAG_PIO_POLLING) &&
(dev->flags & ATA_DFLAG_CDB_INTR))
return 1;
- return (ata_device_blacklisted(dev) & ATA_HORKAGE_NODMA) ? 1 : 0;
+ return (dev->horkage & ATA_HORKAGE_NODMA) ? 1 : 0;
}
/**
spin_unlock_irqrestore(ap->lock, flags);
ata_port_wait_eh(ap);
-
- /* Flush hotplug task. The sequence is similar to
- * ata_port_flush_task().
- */
- cancel_work_sync(&ap->hotplug_task.work); /* akpm: why? */
- cancel_delayed_work(&ap->hotplug_task);
- cancel_work_sync(&ap->hotplug_task.work);
+ cancel_rearming_delayed_work(&ap->hotplug_task);
skip_eh:
/* remove the associated SCSI host */
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_id_to_dma_mode);
-EXPORT_SYMBOL_GPL(ata_device_blacklisted);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
#ifdef CONFIG_PCI
EXPORT_SYMBOL_GPL(pci_test_config_bits);
-EXPORT_SYMBOL_GPL(ata_pci_init_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_init_sff_host);
EXPORT_SYMBOL_GPL(ata_pci_init_bmdma);
-EXPORT_SYMBOL_GPL(ata_pci_prepare_native_host);
+EXPORT_SYMBOL_GPL(ata_pci_prepare_sff_host);
EXPORT_SYMBOL_GPL(ata_pci_init_one);
EXPORT_SYMBOL_GPL(ata_pci_remove_one);
#ifdef CONFIG_PM
return 1;
}
+static void ata_eh_handle_dev_fail(struct ata_device *dev, int err)
+{
+ struct ata_port *ap = dev->ap;
+ struct ata_eh_context *ehc = &ap->eh_context;
+
+ ehc->tries[dev->devno]--;
+
+ switch (err) {
+ case -ENODEV:
+ /* device missing or wrong IDENTIFY data, schedule probing */
+ ehc->i.probe_mask |= (1 << dev->devno);
+ case -EINVAL:
+ /* give it just one more chance */
+ ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
+ case -EIO:
+ if (ehc->tries[dev->devno] == 1) {
+ /* This is the last chance, better to slow
+ * down than lose it.
+ */
+ sata_down_spd_limit(ap);
+ ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+ }
+ }
+
+ if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
+ /* disable device if it has used up all its chances */
+ ata_dev_disable(dev);
+
+ /* detach if offline */
+ if (ata_port_offline(ap))
+ ata_eh_detach_dev(dev);
+
+ /* probe if requested */
+ if ((ehc->i.probe_mask & (1 << dev->devno)) &&
+ !(ehc->did_probe_mask & (1 << dev->devno))) {
+ ata_eh_detach_dev(dev);
+ ata_dev_init(dev);
+
+ ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
+ ehc->did_probe_mask |= (1 << dev->devno);
+ ehc->i.action |= ATA_EH_SOFTRESET;
+ }
+ } else {
+ /* soft didn't work? be haaaaard */
+ if (ehc->i.flags & ATA_EHI_DID_RESET)
+ ehc->i.action |= ATA_EH_HARDRESET;
+ else
+ ehc->i.action |= ATA_EH_SOFTRESET;
+ }
+}
+
/**
* ata_eh_recover - recover host port after error
* @ap: host port to recover
goto out;
dev_fail:
- ehc->tries[dev->devno]--;
-
- switch (rc) {
- case -ENODEV:
- /* device missing or wrong IDENTIFY data, schedule probing */
- ehc->i.probe_mask |= (1 << dev->devno);
- case -EINVAL:
- /* give it just one more chance */
- ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
- case -EIO:
- if (ehc->tries[dev->devno] == 1) {
- /* This is the last chance, better to slow
- * down than lose it.
- */
- sata_down_spd_limit(ap);
- ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
- }
- }
-
- if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
- /* disable device if it has used up all its chances */
- ata_dev_disable(dev);
-
- /* detach if offline */
- if (ata_port_offline(ap))
- ata_eh_detach_dev(dev);
-
- /* probe if requested */
- if ((ehc->i.probe_mask & (1 << dev->devno)) &&
- !(ehc->did_probe_mask & (1 << dev->devno))) {
- ata_eh_detach_dev(dev);
- ata_dev_init(dev);
-
- ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
- ehc->did_probe_mask |= (1 << dev->devno);
- ehc->i.action |= ATA_EH_SOFTRESET;
- }
- } else {
- /* soft didn't work? be haaaaard */
- if (ehc->i.flags & ATA_EHI_DID_RESET)
- ehc->i.action |= ATA_EH_HARDRESET;
- else
- ehc->i.action |= ATA_EH_SOFTRESET;
- }
+ ata_eh_handle_dev_fail(dev, rc);
if (ata_port_nr_enabled(ap)) {
ata_port_printk(ap, KERN_WARNING, "failed to recover some "
}
/**
- * ata_pci_init_native_host - acquire native ATA resources and init host
+ * ata_pci_init_sff_host - acquire native PCI ATA resources and init host
* @host: target ATA host
*
* Acquire native PCI ATA resources for @host and initialize the
* first two ports of @host accordingly. Ports marked dummy are
* skipped and allocation failure makes the port dummy.
*
+ * Note that native PCI resources are valid even for legacy hosts
+ * as we fix up pdev resources array early in boot, so this
+ * function can be used for both native and legacy SFF hosts.
+ *
* LOCKING:
* Inherited from calling layer (may sleep).
*
* 0 if at least one port is initialized, -ENODEV if no port is
* available.
*/
-int ata_pci_init_native_host(struct ata_host *host)
+int ata_pci_init_sff_host(struct ata_host *host)
{
struct device *gdev = host->dev;
struct pci_dev *pdev = to_pci_dev(gdev);
}
/**
- * ata_pci_prepare_native_host - helper to prepare native PCI ATA host
+ * ata_pci_prepare_sff_host - helper to prepare native PCI ATA host
* @pdev: target PCI device
* @ppi: array of port_info, must be enough for two ports
* @r_host: out argument for the initialized ATA host
* RETURNS:
* 0 on success, -errno otherwise.
*/
-int ata_pci_prepare_native_host(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi,
- struct ata_host **r_host)
+int ata_pci_prepare_sff_host(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct ata_host **r_host)
{
struct ata_host *host;
int rc;
goto err_out;
}
- rc = ata_pci_init_native_host(host);
+ rc = ata_pci_init_sff_host(host);
if (rc)
goto err_out;
return rc;
}
-struct ata_legacy_devres {
- unsigned int mask;
- unsigned long cmd_port[2];
- void __iomem * cmd_addr[2];
- void __iomem * ctl_addr[2];
- unsigned int irq[2];
- void * irq_dev_id[2];
-};
-
-static void ata_legacy_free_irqs(struct ata_legacy_devres *legacy_dr)
-{
- int i;
-
- for (i = 0; i < 2; i++) {
- if (!legacy_dr->irq[i])
- continue;
-
- free_irq(legacy_dr->irq[i], legacy_dr->irq_dev_id[i]);
- legacy_dr->irq[i] = 0;
- legacy_dr->irq_dev_id[i] = NULL;
- }
-}
-
-static void ata_legacy_release(struct device *gdev, void *res)
-{
- struct ata_legacy_devres *this = res;
- int i;
-
- ata_legacy_free_irqs(this);
-
- for (i = 0; i < 2; i++) {
- if (this->cmd_addr[i])
- ioport_unmap(this->cmd_addr[i]);
- if (this->ctl_addr[i])
- ioport_unmap(this->ctl_addr[i]);
- if (this->cmd_port[i])
- release_region(this->cmd_port[i], 8);
- }
-}
-
-static int ata_init_legacy_port(struct ata_port *ap,
- struct ata_legacy_devres *legacy_dr)
-{
- struct ata_host *host = ap->host;
- int port_no = ap->port_no;
- unsigned long cmd_port, ctl_port;
-
- if (port_no == 0) {
- cmd_port = ATA_PRIMARY_CMD;
- ctl_port = ATA_PRIMARY_CTL;
- } else {
- cmd_port = ATA_SECONDARY_CMD;
- ctl_port = ATA_SECONDARY_CTL;
- }
-
- /* request cmd_port */
- if (request_region(cmd_port, 8, "libata"))
- legacy_dr->cmd_port[port_no] = cmd_port;
- else {
- dev_printk(KERN_WARNING, host->dev,
- "0x%0lX IDE port busy\n", cmd_port);
- return -EBUSY;
- }
-
- /* iomap cmd and ctl ports */
- legacy_dr->cmd_addr[port_no] = ioport_map(cmd_port, 8);
- legacy_dr->ctl_addr[port_no] = ioport_map(ctl_port, 1);
- if (!legacy_dr->cmd_addr[port_no] || !legacy_dr->ctl_addr[port_no]) {
- dev_printk(KERN_WARNING, host->dev,
- "failed to map cmd/ctl ports\n");
- return -ENOMEM;
- }
-
- /* init IO addresses */
- ap->ioaddr.cmd_addr = legacy_dr->cmd_addr[port_no];
- ap->ioaddr.altstatus_addr = legacy_dr->ctl_addr[port_no];
- ap->ioaddr.ctl_addr = legacy_dr->ctl_addr[port_no];
- ata_std_ports(&ap->ioaddr);
-
- return 0;
-}
-
-/**
- * ata_init_legacy_host - acquire legacy ATA resources and init ATA host
- * @host: target ATA host
- * @was_busy: out parameter, indicates whether any port was busy
- *
- * Acquire legacy ATA resources for the first two ports of @host
- * and initialize it accordingly. Ports marked dummy are skipped
- * and resource acquistion failure makes the port dummy.
- *
- * LOCKING:
- * Inherited from calling layer (may sleep).
- *
- * RETURNS:
- * 0 if at least one port is initialized, -ENODEV if no port is
- * available.
- */
-static int ata_init_legacy_host(struct ata_host *host, int *was_busy)
-{
- struct device *gdev = host->dev;
- struct ata_legacy_devres *legacy_dr;
- int i, rc;
-
- if (!devres_open_group(gdev, NULL, GFP_KERNEL))
- return -ENOMEM;
-
- rc = -ENOMEM;
- legacy_dr = devres_alloc(ata_legacy_release, sizeof(*legacy_dr),
- GFP_KERNEL);
- if (!legacy_dr)
- goto err_out;
- devres_add(gdev, legacy_dr);
-
- for (i = 0; i < 2; i++) {
- if (ata_port_is_dummy(host->ports[i]))
- continue;
-
- rc = ata_init_legacy_port(host->ports[i], legacy_dr);
- if (rc == 0)
- legacy_dr->mask |= 1 << i;
- else {
- if (rc == -EBUSY)
- (*was_busy)++;
- host->ports[i]->ops = &ata_dummy_port_ops;
- }
- }
-
- if (!legacy_dr->mask) {
- dev_printk(KERN_ERR, gdev, "no available legacy port\n");
- return -ENODEV;
- }
-
- devres_remove_group(gdev, NULL);
- return 0;
-
- err_out:
- devres_release_group(gdev, NULL);
- return rc;
-}
-
-/**
- * ata_request_legacy_irqs - request legacy ATA IRQs
- * @host: target ATA host
- * @handler: array of IRQ handlers
- * @irq_flags: array of IRQ flags
- * @dev_id: array of IRQ dev_ids
- *
- * Request legacy IRQs for non-dummy legacy ports in @host. All
- * IRQ parameters are passed as array to allow ports to have
- * separate IRQ handlers.
- *
- * LOCKING:
- * Inherited from calling layer (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-static int ata_request_legacy_irqs(struct ata_host *host,
- irq_handler_t const *handler,
- const unsigned int *irq_flags,
- void * const *dev_id)
-{
- struct device *gdev = host->dev;
- struct ata_legacy_devres *legacy_dr;
- int i, rc;
-
- legacy_dr = devres_find(host->dev, ata_legacy_release, NULL, NULL);
- BUG_ON(!legacy_dr);
-
- for (i = 0; i < 2; i++) {
- unsigned int irq;
-
- /* FIXME: ATA_*_IRQ() should take generic device not pci_dev */
- if (i == 0)
- irq = ATA_PRIMARY_IRQ(to_pci_dev(gdev));
- else
- irq = ATA_SECONDARY_IRQ(to_pci_dev(gdev));
-
- if (!(legacy_dr->mask & (1 << i)))
- continue;
-
- if (!handler[i]) {
- dev_printk(KERN_ERR, gdev,
- "NULL handler specified for port %d\n", i);
- rc = -EINVAL;
- goto err_out;
- }
-
- rc = request_irq(irq, handler[i], irq_flags[i], DRV_NAME,
- dev_id[i]);
- if (rc) {
- dev_printk(KERN_ERR, gdev,
- "irq %u request failed (errno=%d)\n", irq, rc);
- goto err_out;
- }
-
- /* record irq allocation in legacy_dr */
- legacy_dr->irq[i] = irq;
- legacy_dr->irq_dev_id[i] = dev_id[i];
-
- /* only used to print info */
- if (i == 0)
- host->irq = irq;
- else
- host->irq2 = irq;
- }
-
- return 0;
-
- err_out:
- ata_legacy_free_irqs(legacy_dr);
- return rc;
-}
-
/**
* ata_pci_init_one - Initialize/register PCI IDE host controller
* @pdev: Controller to be initialized
#endif
}
- /* alloc and init host */
- host = ata_host_alloc_pinfo(dev, ppi, 2);
- if (!host) {
- dev_printk(KERN_ERR, &pdev->dev,
- "failed to allocate ATA host\n");
- rc = -ENOMEM;
+ /* prepare host */
+ rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
+ if (rc)
goto err_out;
- }
- if (!legacy_mode) {
- rc = ata_pci_init_native_host(host);
- if (rc)
- goto err_out;
- } else {
- int was_busy = 0;
-
- rc = ata_init_legacy_host(host, &was_busy);
- if (was_busy)
- pcim_pin_device(pdev);
- if (rc)
- goto err_out;
-
- /* request respective PCI regions, may fail */
- rc = pci_request_region(pdev, 1, DRV_NAME);
- rc = pci_request_region(pdev, 3, DRV_NAME);
- }
-
- /* init BMDMA, may fail */
- ata_pci_init_bmdma(host);
pci_set_master(pdev);
/* start host and request IRQ */
if (!legacy_mode) {
rc = devm_request_irq(dev, pdev->irq, pi->port_ops->irq_handler,
IRQF_SHARED, DRV_NAME, host);
+ if (rc)
+ goto err_out;
host->irq = pdev->irq;
} else {
- irq_handler_t handler[2] = { host->ops->irq_handler,
- host->ops->irq_handler };
- unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED };
- void *dev_id[2] = { host, host };
+ if (!ata_port_is_dummy(host->ports[0])) {
+ host->irq = ATA_PRIMARY_IRQ(pdev);
+ rc = devm_request_irq(dev, host->irq,
+ pi->port_ops->irq_handler,
+ IRQF_SHARED, DRV_NAME, host);
+ if (rc)
+ goto err_out;
+ }
- rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id);
+ if (!ata_port_is_dummy(host->ports[1])) {
+ host->irq2 = ATA_SECONDARY_IRQ(pdev);
+ rc = devm_request_irq(dev, host->irq2,
+ pi->port_ops->irq_handler,
+ IRQF_SHARED, DRV_NAME, host);
+ if (rc)
+ goto err_out;
+ }
}
- if (rc)
- goto err_out;
/* register */
rc = ata_host_register(host, pi->sht);
static void ali_init_chipset(struct pci_dev *pdev)
{
- u8 rev, tmp;
+ u8 tmp;
struct pci_dev *north, *isa_bridge;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
/*
* The chipset revision selects the driver operations and
* mode data.
*/
- if (rev >= 0x20 && rev < 0xC2) {
+ if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
pci_read_config_byte(pdev, 0x4B, &tmp);
/* Clear CD-ROM DMA write bit */
tmp &= 0x7F;
pci_write_config_byte(pdev, 0x4B, tmp);
- } else if (rev >= 0xC2) {
+ } else if (pdev->revision >= 0xC2) {
/* Enable cable detection logic */
pci_read_config_byte(pdev, 0x4B, &tmp);
pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
/* Configure the ALi bridge logic. For non ALi rely on BIOS.
Set the south bridge enable bit */
pci_read_config_byte(isa_bridge, 0x79, &tmp);
- if (rev == 0xC2)
+ if (pdev->revision == 0xC2)
pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
- else if (rev > 0xC2 && rev < 0xC5)
+ else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
}
- if (rev >= 0x20) {
+ if (pdev->revision >= 0x20) {
/*
* CD_ROM DMA on (0x53 bit 0). Enable this even if we want
* to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
* via 0x54/55.
*/
pci_read_config_byte(pdev, 0x53, &tmp);
- if (rev <= 0x20)
+ if (pdev->revision <= 0x20)
tmp &= ~0x02;
- if (rev >= 0xc7)
+ if (pdev->revision >= 0xc7)
tmp |= 0x03;
else
tmp |= 0x01; /* CD_ROM enable for DMA */
};
const struct ata_port_info *ppi[] = { NULL, NULL };
- u8 rev, tmp;
+ u8 tmp;
struct pci_dev *isa_bridge;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
/*
* The chipset revision selects the driver operations and
* mode data.
*/
- if (rev < 0x20) {
+ if (pdev->revision < 0x20) {
ppi[0] = &info_early;
- } else if (rev < 0xC2) {
+ } else if (pdev->revision < 0xC2) {
ppi[0] = &info_20;
- } else if (rev == 0xC2) {
+ } else if (pdev->revision == 0xC2) {
ppi[0] = &info_c2;
- } else if (rev == 0xC3) {
+ } else if (pdev->revision == 0xC3) {
ppi[0] = &info_c3;
- } else if (rev == 0xC4) {
+ } else if (pdev->revision == 0xC4) {
ppi[0] = &info_c4;
} else
ppi[0] = &info_c5;
ali_init_chipset(pdev);
isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
- if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
+ if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
/* Are we paired with a UDMA capable chip */
pci_read_config_byte(isa_bridge, 0x5E, &tmp);
if ((tmp & 0x1E) == 0x12)
const struct ata_port_info *ppi[] = { NULL, NULL };
static int printed_version;
int type = id->driver_data;
- u8 rev;
u8 fifo;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_byte(pdev, 0x41, &fifo);
/* Check for AMD7409 without swdma errata and if found adjust type */
- if (type == 1 && rev > 0x7)
+ if (type == 1 && pdev->revision > 0x7)
type = 2;
/* Check for AMD7411 */
}
pci_set_master(cs5530_0);
- pci_set_mwi(cs5530_0);
+ pci_try_set_mwi(cs5530_0);
/*
* Set PCI CacheLineSize to 16-bytes:
#include <linux/libata.h>
#define DRV_NAME "pata_hpt3x3"
-#define DRV_VERSION "0.4.3"
+#define DRV_VERSION "0.5.3"
/**
* hpt3x3_set_piomode - PIO setup
pci_write_config_dword(pdev, 0x48, r2);
}
+#if defined(CONFIG_PATA_HPT3X3_DMA)
/**
* hpt3x3_set_dmamode - DMA timing setup
* @ap: ATA interface
*
* Set up the channel for MWDMA or UDMA modes. Much the same as with
* PIO, load the mode number and then set MWDMA or UDMA flag.
+ *
+ * 0x44 : bit 0-2 master mode, 3-5 slave mode, etc
+ * 0x48 : bit 4/0 DMA/UDMA bit 5/1 for slave etc
*/
static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
r2 &= ~(0x11 << dn); /* Clear MWDMA and UDMA bits */
if (adev->dma_mode >= XFER_UDMA_0)
- r2 |= 0x01 << dn; /* Ultra mode */
+ r2 |= (0x10 << dn); /* Ultra mode */
else
- r2 |= 0x10 << dn; /* MWDMA */
+ r2 |= (0x01 << dn); /* MWDMA */
pci_write_config_dword(pdev, 0x44, r1);
pci_write_config_dword(pdev, 0x48, r2);
}
+#endif /* CONFIG_PATA_HPT3X3_DMA */
+
+/**
+ * hpt3x3_atapi_dma - ATAPI DMA check
+ * @qc: Queued command
+ *
+ * Just say no - we don't do ATAPI DMA
+ */
+
+static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
+{
+ return 1;
+}
static struct scsi_host_template hpt3x3_sht = {
.module = THIS_MODULE,
static struct ata_port_operations hpt3x3_port_ops = {
.port_disable = ata_port_disable,
.set_piomode = hpt3x3_set_piomode,
+#if defined(CONFIG_PATA_HPT3X3_DMA)
.set_dmamode = hpt3x3_set_dmamode,
+#endif
.mode_filter = ata_pci_default_filter,
.tf_load = ata_tf_load,
.bmdma_start = ata_bmdma_start,
.bmdma_stop = ata_bmdma_stop,
.bmdma_status = ata_bmdma_status,
+ .check_atapi_dma= hpt3x3_atapi_dma,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
}
-
/**
* hpt3x3_init_one - Initialise an HPT343/363
- * @dev: PCI device
+ * @pdev: PCI device
* @id: Entry in match table
*
- * Perform basic initialisation. The chip has a quirk that it won't
- * function unless it is at XX00. The old ATA driver touched this up
- * but we leave it for pci quirks to do properly.
+ * Perform basic initialisation. We set the device up so we access all
+ * ports via BAR4. This is neccessary to work around errata.
*/
-static int hpt3x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
{
+ static int printed_version;
static const struct ata_port_info info = {
.sht = &hpt3x3_sht,
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = 0x1f,
+#if defined(CONFIG_PATA_HPT3X3_DMA)
+ /* Further debug needed */
.mwdma_mask = 0x07,
.udma_mask = 0x07,
+#endif
.port_ops = &hpt3x3_port_ops
};
+ /* Register offsets of taskfiles in BAR4 area */
+ static const u8 offset_cmd[2] = { 0x20, 0x28 };
+ static const u8 offset_ctl[2] = { 0x36, 0x3E };
const struct ata_port_info *ppi[] = { &info, NULL };
-
- hpt3x3_init_chipset(dev);
- /* Now kick off ATA set up */
- return ata_pci_init_one(dev, ppi);
+ struct ata_host *host;
+ int i, rc;
+ void __iomem *base;
+
+ hpt3x3_init_chipset(pdev);
+
+ if (!printed_version++)
+ dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
+
+ host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
+ if (!host)
+ return -ENOMEM;
+ /* acquire resources and fill host */
+ rc = pcim_enable_device(pdev);
+ if (rc)
+ return rc;
+
+ /* Everything is relative to BAR4 if we set up this way */
+ rc = pcim_iomap_regions(pdev, 1 << 4, DRV_NAME);
+ if (rc == -EBUSY)
+ pcim_pin_device(pdev);
+ if (rc)
+ return rc;
+ host->iomap = pcim_iomap_table(pdev);
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ return rc;
+
+ base = host->iomap[4]; /* Bus mastering base */
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_ioports *ioaddr = &host->ports[i]->ioaddr;
+
+ ioaddr->cmd_addr = base + offset_cmd[i];
+ ioaddr->altstatus_addr =
+ ioaddr->ctl_addr = base + offset_ctl[i];
+ ioaddr->scr_addr = NULL;
+ ata_std_ports(ioaddr);
+ ioaddr->bmdma_addr = base + 8 * i;
+ }
+ pci_set_master(pdev);
+ return ata_host_activate(host, pdev->irq, ata_interrupt, IRQF_SHARED,
+ &hpt3x3_sht);
}
#ifdef CONFIG_PM
itdev->want[1][1] = ATA_ANY;
itdev->last_device = -1;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &conf);
- if (conf == 0x10) {
+ if (pdev->revision == 0x11) {
itdev->timing10 = 1;
/* Need to disable ATAPI DMA for this case */
if (!itdev->smart)
static int
mpc52xx_ata_suspend(struct of_device *op, pm_message_t state)
{
- return 0; /* FIXME : What to do here ? */
+ struct ata_host *host = dev_get_drvdata(&op->dev);
+
+ return ata_host_suspend(host, state);
}
static int
mpc52xx_ata_resume(struct of_device *op)
{
- return 0; /* FIXME : What to do here ? */
+ struct ata_host *host = dev_get_drvdata(&op->dev);
+ struct mpc52xx_ata_priv *priv = host->private_data;
+ int rv;
+
+ rv = mpc52xx_ata_hw_init(priv);
+ if (rv) {
+ printk(KERN_ERR DRV_NAME ": Error during HW init\n");
+ return rv;
+ }
+
+ ata_host_resume(host);
+
+ return 0;
}
#endif
else
offset = 0; /* 100MHz */
+ /* errata A308 workaround: limit ATAPI UDMA mode to UDMA4 */
+ if (adev->class == ATA_DEV_ATAPI && speed > XFER_UDMA_4) {
+ printk(KERN_INFO "%s: limit ATAPI UDMA to UDMA4\n", DRV_NAME);
+ speed = XFER_UDMA_4;
+ }
+
if (speed >= XFER_UDMA_0)
idx = speed - XFER_UDMA_0;
else
static u8 scc_bmdma_status (struct ata_port *ap)
{
- u8 host_stat;
void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
- host_stat = in_be32(mmio + SCC_DMA_STATUS);
-
- /* Workaround for PTERADD: emulate DMA_INTR when
- * - IDE_STATUS[ERR] = 1
- * - INT_STATUS[INTRQ] = 1
- * - DMA_STATUS[IORACTA] = 1
- */
- if (!(host_stat & ATA_DMA_INTR)) {
- u32 int_status = in_be32(mmio + SCC_DMA_INTST);
- if (ata_altstatus(ap) & ATA_ERR &&
- int_status & INTSTS_INTRQ &&
- host_stat & ATA_DMA_ACTIVE)
- host_stat |= ATA_DMA_INTR;
+ u8 host_stat = in_be32(mmio + SCC_DMA_STATUS);
+ u32 int_status = in_be32(mmio + SCC_DMA_INTST);
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
+ static int retry = 0;
+
+ /* return if IOS_SS is cleared */
+ if (!(in_be32(mmio + SCC_DMA_CMD) & ATA_DMA_START))
+ return host_stat;
+
+ /* errata A252,A308 workaround: Step4 */
+ if (ata_altstatus(ap) & ATA_ERR && int_status & INTSTS_INTRQ)
+ return (host_stat | ATA_DMA_INTR);
+
+ /* errata A308 workaround Step5 */
+ if (int_status & INTSTS_IOIRQS) {
+ host_stat |= ATA_DMA_INTR;
+
+ /* We don't check ATAPI DMA because it is limited to UDMA4 */
+ if ((qc->tf.protocol == ATA_PROT_DMA &&
+ qc->dev->xfer_mode > XFER_UDMA_4)) {
+ if (!(int_status & INTSTS_ACTEINT)) {
+ printk(KERN_WARNING "ata%u: data lost occurred. (ACTEINT==0, retry:%d)\n",
+ ap->print_id, retry);
+ host_stat |= ATA_DMA_ERR;
+ if (retry++)
+ ap->udma_mask >>= 1;
+ } else
+ retry = 0;
+ }
}
return host_stat;
{
DPRINTK("ENTER\n");
- /* re-enable interrupts */
- if (!ap->ops->error_handler)
- ap->ops->irq_on(ap);
-
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
ap->ops->dev_select(ap, 1);
static int serverworks_fixup_csb(struct pci_dev *pdev)
{
- u8 rev;
u8 btr;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
-
/* Third Channel Test */
if (!(PCI_FUNC(pdev->devfn) & 1)) {
struct pci_dev * findev = NULL;
if (!(PCI_FUNC(pdev->devfn) & 1))
btr |= 0x2;
else
- btr |= (rev >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
+ btr |= (pdev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
pci_write_config_byte(pdev, 0x5A, btr);
return btr;
if (!pci_test_config_bits(pdev, &sis_enable_bits[ap->port_no]))
return -ENOENT;
+ /* Clear the FIFO settings. We can't enable the FIFO until
+ we know we are poking at a disk */
+ pci_write_config_byte(pdev, 0x4B, 0);
return ata_std_prereset(ap, deadline);
}
if (host != NULL) {
chipset = sets; /* Match found */
if (sets->device == 0x630) { /* SIS630 */
- u8 host_rev;
- pci_read_config_byte(host, PCI_REVISION_ID, &host_rev);
- if (host_rev >= 0x30) /* 630 ET */
+ if (host->revision >= 0x30) /* 630 ET */
chipset = &sis100_early;
}
break;
u16 trueid;
u8 prefctl;
u8 idecfg;
- u8 sbrev;
/* Try the second unmasking technique */
pci_read_config_byte(pdev, 0x4a, &idecfg);
lpc_bridge = pci_get_slot(pdev->bus, 0x10); /* Bus 0 Dev 2 Fn 0 */
if (lpc_bridge == NULL)
break;
- pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(pdev, 0x49, &prefctl);
pci_dev_put(lpc_bridge);
- if (sbrev == 0x10 && (prefctl & 0x80)) {
+ if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
chipset = &sis133_early;
break;
}
static int sl82c105_bridge_revision(struct pci_dev *pdev)
{
struct pci_dev *bridge;
- u8 rev;
/*
* The bridge should be part of the same device, but function 0.
/*
* We need to find function 0's revision, not function 1
*/
- pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
-
pci_dev_put(bridge);
- return rev;
+ return bridge->revision;
}
struct pci_dev *isa = NULL;
const struct via_isa_bridge *config;
static int printed_version;
- u8 t;
u8 enable;
u32 timing;
!!(config->flags & VIA_BAD_ID),
config->id, NULL))) {
- pci_read_config_byte(isa, PCI_REVISION_ID, &t);
- if (t >= config->rev_min &&
- t <= config->rev_max)
+ if (isa->revision >= config->rev_min &&
+ isa->revision <= config->rev_max)
break;
pci_dev_put(isa);
}
I distinctly remember a couple workarounds (one related to PCI-X)
are still needed.
- 2) Convert to LibATA new EH. Required for hotplug, NCQ, and sane
- probing/error handling in general. MUST HAVE.
-
- 3) Add hotplug support (easy, once new-EH support appears)
-
4) Add NCQ support (easy to intermediate, once new-EH support appears)
5) Investigate problems with PCI Message Signalled Interrupts (MSI).
MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */
MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ,
- MV_USE_Q_DEPTH = ATA_DEF_QUEUE,
-
MV_MAX_Q_DEPTH = 32,
MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1,
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
- ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO |
- ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING),
+ MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+ ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
+ ATA_FLAG_PIO_POLLING,
MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
CRQB_FLAG_READ = (1 << 0),
CRQB_TAG_SHIFT = 1,
+ CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
+ CRQB_HOSTQ_SHIFT = 17, /* CRQB Gen-II/IIE HostQueTag shift */
CRQB_CMD_ADDR_SHIFT = 8,
CRQB_CMD_CS = (0x2 << 11),
CRQB_CMD_LAST = (1 << 15),
CRPB_FLAG_STATUS_SHIFT = 8,
+ CRPB_IOID_SHIFT_6 = 5, /* CRPB Gen-II IO Id shift */
+ CRPB_IOID_SHIFT_7 = 7, /* CRPB Gen-IIE IO Id shift */
EPRD_FLAG_END_OF_TBL = (1 << 31),
EDMA_ERR_DEV_DCON = (1 << 3),
EDMA_ERR_DEV_CON = (1 << 4),
EDMA_ERR_SERR = (1 << 5),
- EDMA_ERR_SELF_DIS = (1 << 7),
+ EDMA_ERR_SELF_DIS = (1 << 7), /* Gen II/IIE self-disable */
+ EDMA_ERR_SELF_DIS_5 = (1 << 8), /* Gen I self-disable */
EDMA_ERR_BIST_ASYNC = (1 << 8),
+ EDMA_ERR_TRANS_IRQ_7 = (1 << 8), /* Gen IIE transprt layer irq */
EDMA_ERR_CRBQ_PAR = (1 << 9),
EDMA_ERR_CRPB_PAR = (1 << 10),
EDMA_ERR_INTRL_PAR = (1 << 11),
EDMA_ERR_LNK_CTRL_TX = (0x1f << 21),
EDMA_ERR_LNK_DATA_TX = (0x1f << 26),
EDMA_ERR_TRANS_PROTO = (1 << 31),
- EDMA_ERR_FATAL = (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
- EDMA_ERR_DEV_DCON | EDMA_ERR_CRBQ_PAR |
- EDMA_ERR_CRPB_PAR | EDMA_ERR_INTRL_PAR |
- EDMA_ERR_IORDY | EDMA_ERR_LNK_CTRL_RX_2 |
- EDMA_ERR_LNK_DATA_RX |
- EDMA_ERR_LNK_DATA_TX |
- EDMA_ERR_TRANS_PROTO),
+ EDMA_ERR_OVERRUN_5 = (1 << 5),
+ EDMA_ERR_UNDERRUN_5 = (1 << 6),
+ EDMA_EH_FREEZE = EDMA_ERR_D_PAR |
+ EDMA_ERR_PRD_PAR |
+ EDMA_ERR_DEV_DCON |
+ EDMA_ERR_DEV_CON |
+ EDMA_ERR_SERR |
+ EDMA_ERR_SELF_DIS |
+ EDMA_ERR_CRBQ_PAR |
+ EDMA_ERR_CRPB_PAR |
+ EDMA_ERR_INTRL_PAR |
+ EDMA_ERR_IORDY |
+ EDMA_ERR_LNK_CTRL_RX_2 |
+ EDMA_ERR_LNK_DATA_RX |
+ EDMA_ERR_LNK_DATA_TX |
+ EDMA_ERR_TRANS_PROTO,
+ EDMA_EH_FREEZE_5 = EDMA_ERR_D_PAR |
+ EDMA_ERR_PRD_PAR |
+ EDMA_ERR_DEV_DCON |
+ EDMA_ERR_DEV_CON |
+ EDMA_ERR_OVERRUN_5 |
+ EDMA_ERR_UNDERRUN_5 |
+ EDMA_ERR_SELF_DIS_5 |
+ EDMA_ERR_CRBQ_PAR |
+ EDMA_ERR_CRPB_PAR |
+ EDMA_ERR_INTRL_PAR |
+ EDMA_ERR_IORDY,
EDMA_REQ_Q_BASE_HI_OFS = 0x10,
EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
MV_HP_ERRATA_XX42A0 = (1 << 5),
- MV_HP_50XX = (1 << 6),
- MV_HP_GEN_IIE = (1 << 7),
+ MV_HP_GEN_I = (1 << 6),
+ MV_HP_GEN_II = (1 << 7),
+ MV_HP_GEN_IIE = (1 << 8),
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0),
MV_PP_FLAG_EDMA_DS_ACT = (1 << 1),
+ MV_PP_FLAG_HAD_A_RESET = (1 << 2),
};
-#define IS_50XX(hpriv) ((hpriv)->hp_flags & MV_HP_50XX)
-#define IS_60XX(hpriv) (((hpriv)->hp_flags & MV_HP_50XX) == 0)
-#define IS_GEN_I(hpriv) IS_50XX(hpriv)
-#define IS_GEN_II(hpriv) IS_60XX(hpriv)
+#define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
+#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
enum {
dma_addr_t crpb_dma;
struct mv_sg *sg_tbl;
dma_addr_t sg_tbl_dma;
+
+ unsigned int req_idx;
+ unsigned int resp_idx;
+
u32 pp_flags;
};
static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
static u32 mv5_scr_read(struct ata_port *ap, unsigned int sc_reg_in);
static void mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val);
-static void mv_phy_reset(struct ata_port *ap);
-static void __mv_phy_reset(struct ata_port *ap, int can_sleep);
static int mv_port_start(struct ata_port *ap);
static void mv_port_stop(struct ata_port *ap);
static void mv_qc_prep(struct ata_queued_cmd *qc);
static void mv_qc_prep_iie(struct ata_queued_cmd *qc);
static unsigned int mv_qc_issue(struct ata_queued_cmd *qc);
-static void mv_eng_timeout(struct ata_port *ap);
+static void mv_error_handler(struct ata_port *ap);
+static void mv_post_int_cmd(struct ata_queued_cmd *qc);
+static void mv_eh_freeze(struct ata_port *ap);
+static void mv_eh_thaw(struct ata_port *ap);
static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio);
static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
-static void mv_stop_and_reset(struct ata_port *ap);
-static struct scsi_host_template mv_sht = {
+static struct scsi_host_template mv5_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = MV_MAX_SG_CT,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = 1,
+ .proc_name = DRV_NAME,
+ .dma_boundary = MV_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
+ .bios_param = ata_std_bios_param,
+};
+
+static struct scsi_host_template mv6_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
- .can_queue = MV_USE_Q_DEPTH,
+ .can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = MV_MAX_SG_CT,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = mv_phy_reset,
.cable_detect = ata_cable_sata,
.qc_prep = mv_qc_prep,
.qc_issue = mv_qc_issue,
.data_xfer = ata_data_xfer,
- .eng_timeout = mv_eng_timeout,
-
.irq_clear = mv_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
+ .error_handler = mv_error_handler,
+ .post_internal_cmd = mv_post_int_cmd,
+ .freeze = mv_eh_freeze,
+ .thaw = mv_eh_thaw,
+
.scr_read = mv5_scr_read,
.scr_write = mv5_scr_write,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = mv_phy_reset,
.cable_detect = ata_cable_sata,
.qc_prep = mv_qc_prep,
.qc_issue = mv_qc_issue,
.data_xfer = ata_data_xfer,
- .eng_timeout = mv_eng_timeout,
-
.irq_clear = mv_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
+ .error_handler = mv_error_handler,
+ .post_internal_cmd = mv_post_int_cmd,
+ .freeze = mv_eh_freeze,
+ .thaw = mv_eh_thaw,
+
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
- .phy_reset = mv_phy_reset,
.cable_detect = ata_cable_sata,
.qc_prep = mv_qc_prep_iie,
.qc_issue = mv_qc_issue,
.data_xfer = ata_data_xfer,
- .eng_timeout = mv_eng_timeout,
-
.irq_clear = mv_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
+ .error_handler = mv_error_handler,
+ .post_internal_cmd = mv_post_int_cmd,
+ .freeze = mv_eh_freeze,
+ .thaw = mv_eh_thaw,
+
.scr_read = mv_scr_read,
.scr_write = mv_scr_write,
.port_ops = &mv5_ops,
},
{ /* chip_508x */
- .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+ .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv5_ops,
},
{ /* chip_5080 */
- .flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC),
+ .flags = MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv5_ops,
},
{ /* chip_604x */
- .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv6_ops,
},
{ /* chip_608x */
- .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- MV_FLAG_DUAL_HC),
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ MV_FLAG_DUAL_HC,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv6_ops,
},
{ /* chip_6042 */
- .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
{ /* chip_7042 */
- .flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS),
+ .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
{
}
+static void mv_set_edma_ptrs(void __iomem *port_mmio,
+ struct mv_host_priv *hpriv,
+ struct mv_port_priv *pp)
+{
+ u32 index;
+
+ /*
+ * initialize request queue
+ */
+ index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
+
+ WARN_ON(pp->crqb_dma & 0x3ff);
+ writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
+ writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
+ port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl((pp->crqb_dma & 0xffffffff) | index,
+ port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ else
+ writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+
+ /*
+ * initialize response queue
+ */
+ index = (pp->resp_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_RSP_Q_PTR_SHIFT;
+
+ WARN_ON(pp->crpb_dma & 0xff);
+ writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
+
+ if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
+ writelfl((pp->crpb_dma & 0xffffffff) | index,
+ port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+ else
+ writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+
+ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
+ port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+}
+
/**
* mv_start_dma - Enable eDMA engine
* @base: port base address
* LOCKING:
* Inherited from caller.
*/
-static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp)
+static void mv_start_dma(void __iomem *base, struct mv_host_priv *hpriv,
+ struct mv_port_priv *pp)
{
- if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) {
+ if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
+ /* clear EDMA event indicators, if any */
+ writelfl(0, base + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ mv_set_edma_ptrs(base, hpriv, pp);
+
writelfl(EDMA_EN, base + EDMA_CMD_OFS);
pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
}
* LOCKING:
* Inherited from caller.
*/
-static void mv_stop_dma(struct ata_port *ap)
+static int mv_stop_dma(struct ata_port *ap)
{
void __iomem *port_mmio = mv_ap_base(ap);
struct mv_port_priv *pp = ap->private_data;
u32 reg;
- int i;
+ int i, err = 0;
- if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) {
+ if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
/* Disable EDMA if active. The disable bit auto clears.
*/
writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
/* now properly wait for the eDMA to stop */
for (i = 1000; i > 0; i--) {
reg = readl(port_mmio + EDMA_CMD_OFS);
- if (!(EDMA_EN & reg)) {
+ if (!(reg & EDMA_EN))
break;
- }
+
udelay(100);
}
- if (EDMA_EN & reg) {
+ if (reg & EDMA_EN) {
ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
- /* FIXME: Consider doing a reset here to recover */
+ err = -EIO;
}
+
+ return err;
}
#ifdef ATA_DEBUG
writelfl(val, mv_ap_base(ap) + ofs);
}
-static void mv_edma_cfg(struct mv_host_priv *hpriv, void __iomem *port_mmio)
+static void mv_edma_cfg(struct ata_port *ap, struct mv_host_priv *hpriv,
+ void __iomem *port_mmio)
{
u32 cfg = readl(port_mmio + EDMA_CFG_OFS);
/* set up non-NCQ EDMA configuration */
- cfg &= ~(1 << 9); /* disable equeue */
+ cfg &= ~(1 << 9); /* disable eQue */
if (IS_GEN_I(hpriv)) {
cfg &= ~0x1f; /* clear queue depth */
cfg |= (1 << 18); /* enab early completion */
cfg |= (1 << 17); /* enab cut-through (dis stor&forwrd) */
cfg &= ~(1 << 16); /* dis FIS-based switching (for now) */
- cfg &= ~(EDMA_CFG_NCQ | EDMA_CFG_NCQ_GO_ON_ERR); /* clear NCQ */
+ cfg &= ~(EDMA_CFG_NCQ); /* clear NCQ */
}
writelfl(cfg, port_mmio + EDMA_CFG_OFS);
pp->sg_tbl = mem;
pp->sg_tbl_dma = mem_dma;
- mv_edma_cfg(hpriv, port_mmio);
+ mv_edma_cfg(ap, hpriv, port_mmio);
- writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
- writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK,
- port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl(pp->crqb_dma & 0xffffffff,
- port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- else
- writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
-
- writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl(pp->crpb_dma & 0xffffffff,
- port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
- else
- writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-
- writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK,
- port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+ mv_set_edma_ptrs(port_mmio, hpriv, pp);
/* Don't turn on EDMA here...do it before DMA commands only. Else
* we'll be unable to send non-data, PIO, etc due to restricted access
return n_sg;
}
-static inline unsigned mv_inc_q_index(unsigned index)
-{
- return (index + 1) & MV_MAX_Q_DEPTH_MASK;
-}
-
static inline void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
{
u16 tmp = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS |
u16 flags = 0;
unsigned in_index;
- if (ATA_PROT_DMA != qc->tf.protocol)
+ if (qc->tf.protocol != ATA_PROT_DMA)
return;
/* Fill in command request block
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
+ flags |= qc->tag << CRQB_IOID_SHIFT; /* 50xx appears to ignore this*/
- /* get current queue index from hardware */
- in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
- >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ /* get current queue index from software */
+ in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
pp->crqb[in_index].sg_addr =
cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
unsigned in_index;
u32 flags = 0;
- if (ATA_PROT_DMA != qc->tf.protocol)
+ if (qc->tf.protocol != ATA_PROT_DMA)
return;
/* Fill in Gen IIE command request block
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
+ flags |= qc->tag << CRQB_IOID_SHIFT; /* "I/O Id" is -really-
+ what we use as our tag */
- /* get current queue index from hardware */
- in_index = (readl(mv_ap_base(ap) + EDMA_REQ_Q_IN_PTR_OFS)
- >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ /* get current queue index from software */
+ in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
crqb = (struct mv_crqb_iie *) &pp->crqb[in_index];
crqb->addr = cpu_to_le32(pp->sg_tbl_dma & 0xffffffff);
*/
static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
{
- void __iomem *port_mmio = mv_ap_base(qc->ap);
- struct mv_port_priv *pp = qc->ap->private_data;
- unsigned in_index;
- u32 in_ptr;
+ struct ata_port *ap = qc->ap;
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ u32 in_index;
- if (ATA_PROT_DMA != qc->tf.protocol) {
+ if (qc->tf.protocol != ATA_PROT_DMA) {
/* We're about to send a non-EDMA capable command to the
* port. Turn off EDMA so there won't be problems accessing
* shadow block, etc registers.
*/
- mv_stop_dma(qc->ap);
+ mv_stop_dma(ap);
return ata_qc_issue_prot(qc);
}
- in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
- in_index = (in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ mv_start_dma(port_mmio, hpriv, pp);
+
+ in_index = pp->req_idx & MV_MAX_Q_DEPTH_MASK;
/* until we do queuing, the queue should be empty at this point */
WARN_ON(in_index != ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
- in_index = mv_inc_q_index(in_index); /* now incr producer index */
+ pp->req_idx++;
- mv_start_dma(port_mmio, pp);
+ in_index = (pp->req_idx & MV_MAX_Q_DEPTH_MASK) << EDMA_REQ_Q_PTR_SHIFT;
/* and write the request in pointer to kick the EDMA to life */
- in_ptr &= EDMA_REQ_Q_BASE_LO_MASK;
- in_ptr |= in_index << EDMA_REQ_Q_PTR_SHIFT;
- writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+ writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
+ port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
return 0;
}
-/**
- * mv_get_crpb_status - get status from most recently completed cmd
- * @ap: ATA channel to manipulate
- *
- * This routine is for use when the port is in DMA mode, when it
- * will be using the CRPB (command response block) method of
- * returning command completion information. We check indices
- * are good, grab status, and bump the response consumer index to
- * prove that we're up to date.
- *
- * LOCKING:
- * Inherited from caller.
- */
-static u8 mv_get_crpb_status(struct ata_port *ap)
-{
- void __iomem *port_mmio = mv_ap_base(ap);
- struct mv_port_priv *pp = ap->private_data;
- unsigned out_index;
- u32 out_ptr;
- u8 ata_status;
-
- out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
- out_index = (out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
-
- ata_status = le16_to_cpu(pp->crpb[out_index].flags)
- >> CRPB_FLAG_STATUS_SHIFT;
-
- /* increment our consumer index... */
- out_index = mv_inc_q_index(out_index);
-
- /* and, until we do NCQ, there should only be 1 CRPB waiting */
- WARN_ON(out_index != ((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
- >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK));
-
- /* write out our inc'd consumer index so EDMA knows we're caught up */
- out_ptr &= EDMA_RSP_Q_BASE_LO_MASK;
- out_ptr |= out_index << EDMA_RSP_Q_PTR_SHIFT;
- writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
-
- /* Return ATA status register for completed CRPB */
- return ata_status;
-}
-
/**
* mv_err_intr - Handle error interrupts on the port
* @ap: ATA channel to manipulate
* LOCKING:
* Inherited from caller.
*/
-static void mv_err_intr(struct ata_port *ap, int reset_allowed)
+static void mv_err_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
{
void __iomem *port_mmio = mv_ap_base(ap);
- u32 edma_err_cause, serr = 0;
+ u32 edma_err_cause, eh_freeze_mask, serr = 0;
+ struct mv_port_priv *pp = ap->private_data;
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ unsigned int edma_enabled = (pp->pp_flags & MV_PP_FLAG_EDMA_EN);
+ unsigned int action = 0, err_mask = 0;
+ struct ata_eh_info *ehi = &ap->eh_info;
- edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+ ata_ehi_clear_desc(ehi);
- if (EDMA_ERR_SERR & edma_err_cause) {
+ if (!edma_enabled) {
+ /* just a guess: do we need to do this? should we
+ * expand this, and do it in all cases?
+ */
sata_scr_read(ap, SCR_ERROR, &serr);
sata_scr_write_flush(ap, SCR_ERROR, serr);
}
- if (EDMA_ERR_SELF_DIS & edma_err_cause) {
- struct mv_port_priv *pp = ap->private_data;
- pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+
+ edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ ata_ehi_push_desc(ehi, "edma_err 0x%08x", edma_err_cause);
+
+ /*
+ * all generations share these EDMA error cause bits
+ */
+
+ if (edma_err_cause & EDMA_ERR_DEV)
+ err_mask |= AC_ERR_DEV;
+ if (edma_err_cause & (EDMA_ERR_D_PAR | EDMA_ERR_PRD_PAR |
+ EDMA_ERR_CRBQ_PAR | EDMA_ERR_CRPB_PAR |
+ EDMA_ERR_INTRL_PAR)) {
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_HARDRESET;
+ ata_ehi_push_desc(ehi, ", parity error");
+ }
+ if (edma_err_cause & (EDMA_ERR_DEV_DCON | EDMA_ERR_DEV_CON)) {
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, edma_err_cause & EDMA_ERR_DEV_DCON ?
+ ", dev disconnect" : ", dev connect");
+ }
+
+ if (IS_GEN_I(hpriv)) {
+ eh_freeze_mask = EDMA_EH_FREEZE_5;
+
+ if (edma_err_cause & EDMA_ERR_SELF_DIS_5) {
+ struct mv_port_priv *pp = ap->private_data;
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ ata_ehi_push_desc(ehi, ", EDMA self-disable");
+ }
+ } else {
+ eh_freeze_mask = EDMA_EH_FREEZE;
+
+ if (edma_err_cause & EDMA_ERR_SELF_DIS) {
+ struct mv_port_priv *pp = ap->private_data;
+ pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ ata_ehi_push_desc(ehi, ", EDMA self-disable");
+ }
+
+ if (edma_err_cause & EDMA_ERR_SERR) {
+ sata_scr_read(ap, SCR_ERROR, &serr);
+ sata_scr_write_flush(ap, SCR_ERROR, serr);
+ err_mask = AC_ERR_ATA_BUS;
+ action |= ATA_EH_HARDRESET;
+ }
}
- DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x "
- "SERR: 0x%08x\n", ap->print_id, edma_err_cause, serr);
/* Clear EDMA now that SERR cleanup done */
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- /* check for fatal here and recover if needed */
- if (reset_allowed && (EDMA_ERR_FATAL & edma_err_cause))
- mv_stop_and_reset(ap);
+ if (!err_mask) {
+ err_mask = AC_ERR_OTHER;
+ action |= ATA_EH_HARDRESET;
+ }
+
+ ehi->serror |= serr;
+ ehi->action |= action;
+
+ if (qc)
+ qc->err_mask |= err_mask;
+ else
+ ehi->err_mask |= err_mask;
+
+ if (edma_err_cause & eh_freeze_mask)
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
+}
+
+static void mv_intr_pio(struct ata_port *ap)
+{
+ struct ata_queued_cmd *qc;
+ u8 ata_status;
+
+ /* ignore spurious intr if drive still BUSY */
+ ata_status = readb(ap->ioaddr.status_addr);
+ if (unlikely(ata_status & ATA_BUSY))
+ return;
+
+ /* get active ATA command */
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (unlikely(!qc)) /* no active tag */
+ return;
+ if (qc->tf.flags & ATA_TFLAG_POLLING) /* polling; we don't own qc */
+ return;
+
+ /* and finally, complete the ATA command */
+ qc->err_mask |= ac_err_mask(ata_status);
+ ata_qc_complete(qc);
+}
+
+static void mv_intr_edma(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ struct mv_host_priv *hpriv = ap->host->private_data;
+ struct mv_port_priv *pp = ap->private_data;
+ struct ata_queued_cmd *qc;
+ u32 out_index, in_index;
+ bool work_done = false;
+
+ /* get h/w response queue pointer */
+ in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+ >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+
+ while (1) {
+ u16 status;
+
+ /* get s/w response queue last-read pointer, and compare */
+ out_index = pp->resp_idx & MV_MAX_Q_DEPTH_MASK;
+ if (in_index == out_index)
+ break;
+
+
+ /* 50xx: get active ATA command */
+ if (IS_GEN_I(hpriv))
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+
+ /* 60xx: get active ATA command via tag, to enable support
+ * for queueing. this works transparently for queued and
+ * non-queued modes.
+ */
+ else {
+ unsigned int tag;
+
+ if (IS_GEN_II(hpriv))
+ tag = (le16_to_cpu(pp->crpb[out_index].id)
+ >> CRPB_IOID_SHIFT_6) & 0x3f;
+ else
+ tag = (le16_to_cpu(pp->crpb[out_index].id)
+ >> CRPB_IOID_SHIFT_7) & 0x3f;
+
+ qc = ata_qc_from_tag(ap, tag);
+ }
+
+ /* lower 8 bits of status are EDMA_ERR_IRQ_CAUSE_OFS
+ * bits (WARNING: might not necessarily be associated
+ * with this command), which -should- be clear
+ * if all is well
+ */
+ status = le16_to_cpu(pp->crpb[out_index].flags);
+ if (unlikely(status & 0xff)) {
+ mv_err_intr(ap, qc);
+ return;
+ }
+
+ /* and finally, complete the ATA command */
+ if (qc) {
+ qc->err_mask |=
+ ac_err_mask(status >> CRPB_FLAG_STATUS_SHIFT);
+ ata_qc_complete(qc);
+ }
+
+ /* advance software response queue pointer, to
+ * indicate (after the loop completes) to hardware
+ * that we have consumed a response queue entry.
+ */
+ work_done = true;
+ pp->resp_idx++;
+ }
+
+ if (work_done)
+ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
+ (out_index << EDMA_RSP_Q_PTR_SHIFT),
+ port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
/**
{
void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
void __iomem *hc_mmio = mv_hc_base(mmio, hc);
- struct ata_queued_cmd *qc;
u32 hc_irq_cause;
- int shift, port, port0, hard_port, handled;
- unsigned int err_mask;
+ int port, port0;
if (hc == 0)
port0 = 0;
/* we'll need the HC success int register in most cases */
hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
- if (hc_irq_cause)
- writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+ if (!hc_irq_cause)
+ return;
+
+ writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n",
hc,relevant,hc_irq_cause);
for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) {
- u8 ata_status = 0;
struct ata_port *ap = host->ports[port];
struct mv_port_priv *pp = ap->private_data;
+ int have_err_bits, hard_port, shift;
+
+ if ((!ap) || (ap->flags & ATA_FLAG_DISABLED))
+ continue;
+
+ shift = port << 1; /* (port * 2) */
+ if (port >= MV_PORTS_PER_HC) {
+ shift++; /* skip bit 8 in the HC Main IRQ reg */
+ }
+ have_err_bits = ((PORT0_ERR << shift) & relevant);
+
+ if (unlikely(have_err_bits)) {
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
+ continue;
+
+ mv_err_intr(ap, qc);
+ continue;
+ }
hard_port = mv_hardport_from_port(port); /* range 0..3 */
- handled = 0; /* ensure ata_status is set if handled++ */
- /* Note that DEV_IRQ might happen spuriously during EDMA,
- * and should be ignored in such cases.
- * The cause of this is still under investigation.
- */
if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
- /* EDMA: check for response queue interrupt */
- if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) {
- ata_status = mv_get_crpb_status(ap);
- handled = 1;
- }
+ if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause)
+ mv_intr_edma(ap);
} else {
- /* PIO: check for device (drive) interrupt */
- if ((DEV_IRQ << hard_port) & hc_irq_cause) {
- ata_status = readb(ap->ioaddr.status_addr);
- handled = 1;
- /* ignore spurious intr if drive still BUSY */
- if (ata_status & ATA_BUSY) {
- ata_status = 0;
- handled = 0;
- }
- }
+ if ((DEV_IRQ << hard_port) & hc_irq_cause)
+ mv_intr_pio(ap);
}
+ }
+ VPRINTK("EXIT\n");
+}
- if (ap && (ap->flags & ATA_FLAG_DISABLED))
- continue;
+static void mv_pci_error(struct ata_host *host, void __iomem *mmio)
+{
+ struct ata_port *ap;
+ struct ata_queued_cmd *qc;
+ struct ata_eh_info *ehi;
+ unsigned int i, err_mask, printed = 0;
+ u32 err_cause;
- err_mask = ac_err_mask(ata_status);
+ err_cause = readl(mmio + PCI_IRQ_CAUSE_OFS);
- shift = port << 1; /* (port * 2) */
- if (port >= MV_PORTS_PER_HC) {
- shift++; /* skip bit 8 in the HC Main IRQ reg */
- }
- if ((PORT0_ERR << shift) & relevant) {
- mv_err_intr(ap, 1);
- err_mask |= AC_ERR_OTHER;
- handled = 1;
- }
+ dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
+ err_cause);
- if (handled) {
+ DPRINTK("All regs @ PCI error\n");
+ mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
+
+ writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
+
+ for (i = 0; i < host->n_ports; i++) {
+ ap = host->ports[i];
+ if (!ata_port_offline(ap)) {
+ ehi = &ap->eh_info;
+ ata_ehi_clear_desc(ehi);
+ if (!printed++)
+ ata_ehi_push_desc(ehi,
+ "PCI err cause 0x%08x", err_cause);
+ err_mask = AC_ERR_HOST_BUS;
+ ehi->action = ATA_EH_HARDRESET;
qc = ata_qc_from_tag(ap, ap->active_tag);
- if (qc && (qc->flags & ATA_QCFLAG_ACTIVE)) {
- VPRINTK("port %u IRQ found for qc, "
- "ata_status 0x%x\n", port,ata_status);
- /* mark qc status appropriately */
- if (!(qc->tf.flags & ATA_TFLAG_POLLING)) {
- qc->err_mask |= err_mask;
- ata_qc_complete(qc);
- }
- }
+ if (qc)
+ qc->err_mask |= err_mask;
+ else
+ ehi->err_mask |= err_mask;
+
+ ata_port_freeze(ap);
}
}
- VPRINTK("EXIT\n");
}
/**
- * mv_interrupt -
+ * mv_interrupt - Main interrupt event handler
* @irq: unused
* @dev_instance: private data; in this case the host structure
- * @regs: unused
*
* Read the read only register to determine if any host
* controllers have pending interrupts. If so, call lower level
struct ata_host *host = dev_instance;
unsigned int hc, handled = 0, n_hcs;
void __iomem *mmio = host->iomap[MV_PRIMARY_BAR];
- struct mv_host_priv *hpriv;
u32 irq_stat;
irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS);
n_hcs = mv_get_hc_count(host->ports[0]->flags);
spin_lock(&host->lock);
+ if (unlikely(irq_stat & PCI_ERR)) {
+ mv_pci_error(host, mmio);
+ handled = 1;
+ goto out_unlock; /* skip all other HC irq handling */
+ }
+
for (hc = 0; hc < n_hcs; hc++) {
u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT));
if (relevant) {
mv_host_intr(host, relevant, hc);
- handled++;
- }
- }
-
- hpriv = host->private_data;
- if (IS_60XX(hpriv)) {
- /* deal with the interrupt coalescing bits */
- if (irq_stat & (TRAN_LO_DONE | TRAN_HI_DONE | PORTS_0_7_COAL_DONE)) {
- writelfl(0, mmio + MV_IRQ_COAL_CAUSE_LO);
- writelfl(0, mmio + MV_IRQ_COAL_CAUSE_HI);
- writelfl(0, mmio + MV_IRQ_COAL_CAUSE);
+ handled = 1;
}
}
- if (PCI_ERR & irq_stat) {
- printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n",
- readl(mmio + PCI_IRQ_CAUSE_OFS));
-
- DPRINTK("All regs @ PCI error\n");
- mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
-
- writelfl(0, mmio + PCI_IRQ_CAUSE_OFS);
- handled++;
- }
+out_unlock:
spin_unlock(&host->lock);
return IRQ_RETVAL(handled);
static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio)
{
- u8 rev_id;
int early_5080;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
- early_5080 = (pdev->device == 0x5080) && (rev_id == 0);
+ early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0);
if (!early_5080) {
u32 tmp = readl(mmio + MV_PCI_EXP_ROM_BAR_CTL);
writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS);
- if (IS_60XX(hpriv)) {
+ if (IS_GEN_II(hpriv)) {
u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
ifctl |= (1 << 7); /* enable gen2i speed */
ifctl = (ifctl & 0xfff) | 0x9b1000; /* from chip spec */
hpriv->ops->phy_errata(hpriv, mmio, port_no);
- if (IS_50XX(hpriv))
+ if (IS_GEN_I(hpriv))
mdelay(1);
}
-static void mv_stop_and_reset(struct ata_port *ap)
-{
- struct mv_host_priv *hpriv = ap->host->private_data;
- void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
-
- mv_stop_dma(ap);
-
- mv_channel_reset(hpriv, mmio, ap->port_no);
-
- __mv_phy_reset(ap, 0);
-}
-
-static inline void __msleep(unsigned int msec, int can_sleep)
-{
- if (can_sleep)
- msleep(msec);
- else
- mdelay(msec);
-}
-
/**
- * __mv_phy_reset - Perform eDMA reset followed by COMRESET
+ * mv_phy_reset - Perform eDMA reset followed by COMRESET
* @ap: ATA channel to manipulate
*
* Part of this is taken from __sata_phy_reset and modified to
* Inherited from caller. This is coded to safe to call at
* interrupt level, i.e. it does not sleep.
*/
-static void __mv_phy_reset(struct ata_port *ap, int can_sleep)
+static void mv_phy_reset(struct ata_port *ap, unsigned int *class,
+ unsigned long deadline)
{
struct mv_port_priv *pp = ap->private_data;
struct mv_host_priv *hpriv = ap->host->private_data;
void __iomem *port_mmio = mv_ap_base(ap);
- struct ata_taskfile tf;
- struct ata_device *dev = &ap->device[0];
- unsigned long timeout;
int retry = 5;
u32 sstatus;
/* Issue COMRESET via SControl */
comreset_retry:
sata_scr_write_flush(ap, SCR_CONTROL, 0x301);
- __msleep(1, can_sleep);
+ msleep(1);
sata_scr_write_flush(ap, SCR_CONTROL, 0x300);
- __msleep(20, can_sleep);
+ msleep(20);
- timeout = jiffies + msecs_to_jiffies(200);
do {
sata_scr_read(ap, SCR_STATUS, &sstatus);
if (((sstatus & 0x3) == 3) || ((sstatus & 0x3) == 0))
break;
- __msleep(1, can_sleep);
- } while (time_before(jiffies, timeout));
+ msleep(1);
+ } while (time_before(jiffies, deadline));
/* work around errata */
- if (IS_60XX(hpriv) &&
+ if (IS_GEN_II(hpriv) &&
(sstatus != 0x0) && (sstatus != 0x113) && (sstatus != 0x123) &&
(retry-- > 0))
goto comreset_retry;
"SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
- if (ata_port_online(ap)) {
- ata_port_probe(ap);
- } else {
- sata_scr_read(ap, SCR_STATUS, &sstatus);
- ata_port_printk(ap, KERN_INFO,
- "no device found (phy stat %08x)\n", sstatus);
- ata_port_disable(ap);
+ if (ata_port_offline(ap)) {
+ *class = ATA_DEV_NONE;
return;
}
u8 drv_stat = ata_check_status(ap);
if ((drv_stat != 0x80) && (drv_stat != 0x7f))
break;
- __msleep(500, can_sleep);
+ msleep(500);
if (retry-- <= 0)
break;
+ if (time_after(jiffies, deadline))
+ break;
}
- tf.lbah = readb(ap->ioaddr.lbah_addr);
- tf.lbam = readb(ap->ioaddr.lbam_addr);
- tf.lbal = readb(ap->ioaddr.lbal_addr);
- tf.nsect = readb(ap->ioaddr.nsect_addr);
+ /* FIXME: if we passed the deadline, the following
+ * code probably produces an invalid result
+ */
- dev->class = ata_dev_classify(&tf);
- if (!ata_dev_enabled(dev)) {
- VPRINTK("Port disabled post-sig: No device present.\n");
- ata_port_disable(ap);
- }
+ /* finally, read device signature from TF registers */
+ *class = ata_dev_try_classify(ap, 0, NULL);
writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+ WARN_ON(pp->pp_flags & MV_PP_FLAG_EDMA_EN);
VPRINTK("EXIT\n");
}
-static void mv_phy_reset(struct ata_port *ap)
+static int mv_prereset(struct ata_port *ap, unsigned long deadline)
{
- __mv_phy_reset(ap, 1);
+ struct mv_port_priv *pp = ap->private_data;
+ struct ata_eh_context *ehc = &ap->eh_context;
+ int rc;
+
+ rc = mv_stop_dma(ap);
+ if (rc)
+ ehc->i.action |= ATA_EH_HARDRESET;
+
+ if (!(pp->pp_flags & MV_PP_FLAG_HAD_A_RESET)) {
+ pp->pp_flags |= MV_PP_FLAG_HAD_A_RESET;
+ ehc->i.action |= ATA_EH_HARDRESET;
+ }
+
+ /* if we're about to do hardreset, nothing more to do */
+ if (ehc->i.action & ATA_EH_HARDRESET)
+ return 0;
+
+ if (ata_port_online(ap))
+ rc = ata_wait_ready(ap, deadline);
+ else
+ rc = -ENODEV;
+
+ return rc;
}
-/**
- * mv_eng_timeout - Routine called by libata when SCSI times out I/O
- * @ap: ATA channel to manipulate
- *
- * Intent is to clear all pending error conditions, reset the
- * chip/bus, fail the command, and move on.
- *
- * LOCKING:
- * This routine holds the host lock while failing the command.
- */
-static void mv_eng_timeout(struct ata_port *ap)
+static int mv_hardreset(struct ata_port *ap, unsigned int *class,
+ unsigned long deadline)
{
+ struct mv_host_priv *hpriv = ap->host->private_data;
void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
- struct ata_queued_cmd *qc;
- unsigned long flags;
- ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n");
- DPRINTK("All regs @ start of eng_timeout\n");
- mv_dump_all_regs(mmio, ap->port_no, to_pci_dev(ap->host->dev));
+ mv_stop_dma(ap);
- qc = ata_qc_from_tag(ap, ap->active_tag);
- printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n",
- mmio, ap, qc, qc->scsicmd, &qc->scsicmd->cmnd);
+ mv_channel_reset(hpriv, mmio, ap->port_no);
- spin_lock_irqsave(&ap->host->lock, flags);
- mv_err_intr(ap, 0);
- mv_stop_and_reset(ap);
- spin_unlock_irqrestore(&ap->host->lock, flags);
+ mv_phy_reset(ap, class, deadline);
- WARN_ON(!(qc->flags & ATA_QCFLAG_ACTIVE));
- if (qc->flags & ATA_QCFLAG_ACTIVE) {
- qc->err_mask |= AC_ERR_TIMEOUT;
- ata_eh_qc_complete(qc);
+ return 0;
+}
+
+static void mv_postreset(struct ata_port *ap, unsigned int *classes)
+{
+ u32 serr;
+
+ /* print link status */
+ sata_print_link_status(ap);
+
+ /* clear SError */
+ sata_scr_read(ap, SCR_ERROR, &serr);
+ sata_scr_write_flush(ap, SCR_ERROR, serr);
+
+ /* bail out if no device is present */
+ if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
+ DPRINTK("EXIT, no device\n");
+ return;
}
+
+ /* set up device control */
+ iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+}
+
+static void mv_error_handler(struct ata_port *ap)
+{
+ ata_do_eh(ap, mv_prereset, ata_std_softreset,
+ mv_hardreset, mv_postreset);
+}
+
+static void mv_post_int_cmd(struct ata_queued_cmd *qc)
+{
+ mv_stop_dma(qc->ap);
+}
+
+static void mv_eh_freeze(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+ unsigned int hc = (ap->port_no > 3) ? 1 : 0;
+ u32 tmp, mask;
+ unsigned int shift;
+
+ /* FIXME: handle coalescing completion events properly */
+
+ shift = ap->port_no * 2;
+ if (hc > 0)
+ shift++;
+
+ mask = 0x3 << shift;
+
+ /* disable assertion of portN err, done events */
+ tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
+ writelfl(tmp & ~mask, mmio + HC_MAIN_IRQ_MASK_OFS);
+}
+
+static void mv_eh_thaw(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->host->iomap[MV_PRIMARY_BAR];
+ unsigned int hc = (ap->port_no > 3) ? 1 : 0;
+ void __iomem *hc_mmio = mv_hc_base(mmio, hc);
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 tmp, mask, hc_irq_cause;
+ unsigned int shift, hc_port_no = ap->port_no;
+
+ /* FIXME: handle coalescing completion events properly */
+
+ shift = ap->port_no * 2;
+ if (hc > 0) {
+ shift++;
+ hc_port_no -= 4;
+ }
+
+ mask = 0x3 << shift;
+
+ /* clear EDMA errors on this port */
+ writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+ /* clear pending irq events */
+ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS);
+ hc_irq_cause &= ~(1 << hc_port_no); /* clear CRPB-done */
+ hc_irq_cause &= ~(1 << (hc_port_no + 8)); /* clear Device int */
+ writel(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+
+ /* enable assertion of portN err, done events */
+ tmp = readl(mmio + HC_MAIN_IRQ_MASK_OFS);
+ writelfl(tmp | mask, mmio + HC_MAIN_IRQ_MASK_OFS);
}
/**
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
- u8 rev_id;
u32 hp_flags = hpriv->hp_flags;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
switch(board_idx) {
case chip_5080:
hpriv->ops = &mv5xxx_ops;
- hp_flags |= MV_HP_50XX;
+ hp_flags |= MV_HP_GEN_I;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x1:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
case chip_504x:
case chip_508x:
hpriv->ops = &mv5xxx_ops;
- hp_flags |= MV_HP_50XX;
+ hp_flags |= MV_HP_GEN_I;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_50XXB0;
break;
case chip_604x:
case chip_608x:
hpriv->ops = &mv6xxx_ops;
+ hp_flags |= MV_HP_GEN_II;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x7:
hp_flags |= MV_HP_ERRATA_60X1B2;
break;
case chip_7042:
case chip_6042:
hpriv->ops = &mv6xxx_ops;
-
hp_flags |= MV_HP_GEN_IIE;
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x0:
hp_flags |= MV_HP_ERRATA_XX42A0;
break;
hpriv->ops->enable_leds(hpriv, mmio);
for (port = 0; port < host->n_ports; port++) {
- if (IS_60XX(hpriv)) {
+ if (IS_GEN_II(hpriv)) {
void __iomem *port_mmio = mv_port_base(mmio, port);
u32 ifctl = readl(port_mmio + SATA_INTERFACE_CTL);
/* and unmask interrupt generation for host regs */
writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS);
- if (IS_50XX(hpriv))
+ if (IS_GEN_I(hpriv))
writelfl(~HC_MAIN_MASKED_IRQS_5, mmio + HC_MAIN_IRQ_MASK_OFS);
else
writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS);
{
struct pci_dev *pdev = to_pci_dev(host->dev);
struct mv_host_priv *hpriv = host->private_data;
- u8 rev_id, scc;
+ u8 scc;
const char *scc_s, *gen;
/* Use this to determine the HW stepping of the chip so we know
* what errata to workaround
*/
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
-
pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc);
if (scc == 0)
scc_s = "SCSI";
mv_print_info(host);
pci_set_master(pdev);
+ pci_set_mwi(pdev);
return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
- &mv_sht);
+ IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
}
static int __init mv_init(void)
}
ppi[0] = &nv_port_info[type];
- rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+ rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
if (rc)
return rc;
#include "sata_promise.h"
#define DRV_NAME "sata_promise"
-#define DRV_VERSION "2.08"
+#define DRV_VERSION "2.09"
enum {
PDC_MAX_PORTS = 4,
unsigned int i, tmp;
unsigned int handled = 0;
void __iomem *mmio_base;
+ unsigned int hotplug_offset, ata_no;
+ u32 hotplug_status;
+ int is_sataii_tx4;
VPRINTK("ENTER\n");
mmio_base = host->iomap[PDC_MMIO_BAR];
+ /* read and clear hotplug flags for all ports */
+ if (host->ports[0]->flags & PDC_FLAG_GEN_II)
+ hotplug_offset = PDC2_SATA_PLUG_CSR;
+ else
+ hotplug_offset = PDC_SATA_PLUG_CSR;
+ hotplug_status = readl(mmio_base + hotplug_offset);
+ if (hotplug_status & 0xff)
+ writel(hotplug_status | 0xff, mmio_base + hotplug_offset);
+ hotplug_status &= 0xff; /* clear uninteresting bits */
+
/* reading should also clear interrupts */
mask = readl(mmio_base + PDC_INT_SEQMASK);
- if (mask == 0xffffffff) {
+ if (mask == 0xffffffff && hotplug_status == 0) {
VPRINTK("QUICK EXIT 2\n");
return IRQ_NONE;
}
spin_lock(&host->lock);
mask &= 0xffff; /* only 16 tags possible */
- if (!mask) {
+ if (mask == 0 && hotplug_status == 0) {
VPRINTK("QUICK EXIT 3\n");
goto done_irq;
}
writel(mask, mmio_base + PDC_INT_SEQMASK);
+ is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags);
+
for (i = 0; i < host->n_ports; i++) {
VPRINTK("port %u\n", i);
ap = host->ports[i];
+
+ /* check for a plug or unplug event */
+ ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
+ tmp = hotplug_status & (0x11 << ata_no);
+ if (tmp && ap &&
+ !(ap->flags & ATA_FLAG_DISABLED)) {
+ struct ata_eh_info *ehi = &ap->eh_info;
+ ata_ehi_clear_desc(ehi);
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "hotplug_status %#x", tmp);
+ ata_port_freeze(ap);
+ ++handled;
+ continue;
+ }
+
+ /* check for a packet interrupt */
tmp = mask & (1 << (i + 1));
if (tmp && ap &&
!(ap->flags & ATA_FLAG_DISABLED)) {
tmp = readl(mmio + hotplug_offset);
writel(tmp | 0xff, mmio + hotplug_offset);
- /* mask plug/unplug ints */
+ /* unmask plug/unplug ints */
tmp = readl(mmio + hotplug_offset);
- writel(tmp | 0xff0000, mmio + hotplug_offset);
+ writel(tmp & ~0xff0000, mmio + hotplug_offset);
/* don't initialise TBG or SLEW on 2nd generation chips */
if (is_gen2)
break;
}
- rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+ rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
if (rc)
return rc;
host->private_data = hpriv;
/* the first two ports are standard SFF */
- rc = ata_pci_init_native_host(host);
+ rc = ata_pci_init_sff_host(host);
if (rc)
return rc;
struct ata_host *host;
int rc;
- rc = ata_pci_prepare_native_host(pdev, ppi, &host);
+ rc = ata_pci_prepare_sff_host(pdev, ppi, &host);
if (rc)
return rc;
*r_host = host;
struct pci_dev *pci_dev;
unsigned long real_base;
void __iomem *base;
- unsigned char revision;
int error,i,last;
DPRINTK(">eni_init\n");
pci_dev = eni_dev->pci_dev;
real_base = pci_resource_start(pci_dev, 0);
eni_dev->irq = pci_dev->irq;
- error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision);
- if (error) {
- printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
- dev->number,error);
- return -EINVAL;
- }
if ((error = pci_write_config_word(pci_dev,PCI_COMMAND,
PCI_COMMAND_MEMORY |
(eni_dev->asic ? PCI_COMMAND_PARITY | PCI_COMMAND_SERR : 0)))) {
return -EIO;
}
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%lx,irq=%d,",
- dev->number,revision,real_base,eni_dev->irq);
+ dev->number,pci_dev->revision,real_base,eni_dev->irq);
if (!(base = ioremap_nocache(real_base,MAP_MAX_SIZE))) {
printk("\n");
printk(KERN_ERR DEV_LABEL "(itf %d): can't set up page "
unsigned long membase, srambase;
struct idt77252_dev *card;
struct atm_dev *dev;
- ushort revision = 0;
int i, err;
return err;
}
- if (pci_read_config_word(pcidev, PCI_REVISION_ID, &revision)) {
- printk("idt77252-%d: can't read PCI_REVISION_ID\n", index);
- err = -ENODEV;
- goto err_out_disable_pdev;
- }
-
card = kzalloc(sizeof(struct idt77252_dev), GFP_KERNEL);
if (!card) {
printk("idt77252-%d: can't allocate private data\n", index);
err = -ENOMEM;
goto err_out_disable_pdev;
}
- card->revision = revision;
+ card->revision = pcidev->revision;
card->index = index;
card->pcidev = pcidev;
sprintf(card->name, "idt77252-%d", card->index);
}
printk("%s: ABR SAR (Rev %c): MEM %08lx SRAM %08lx [%u KB]\n",
- card->name, ((revision > 1) && (revision < 25)) ?
- 'A' + revision - 1 : '?', membase, srambase,
+ card->name, ((card->revision > 1) && (card->revision < 25)) ?
+ 'A' + card->revision - 1 : '?', membase, srambase,
card->sramsize / 1024);
if (init_card(dev)) {
unsigned long real_base;
void __iomem *base;
unsigned short command;
- unsigned char revision;
int error, i;
/* The device has been identified and registered. Now we read
real_base = pci_resource_start (iadev->pci, 0);
iadev->irq = iadev->pci->irq;
- if ((error = pci_read_config_word(iadev->pci, PCI_COMMAND,&command))
- || (error = pci_read_config_byte(iadev->pci,
- PCI_REVISION_ID,&revision)))
- {
+ error = pci_read_config_word(iadev->pci, PCI_COMMAND, &command);
+ if (error) {
printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%x\n",
dev->number,error);
return -EINVAL;
}
IF_INIT(printk(DEV_LABEL "(itf %d): rev.%d,realbase=0x%lx,irq=%d\n",
- dev->number, revision, real_base, iadev->irq);)
+ dev->number, iadev->pci->revision, real_base, iadev->irq);)
/* find mapping size of board */
return error;
}
IF_INIT(printk(DEV_LABEL " (itf %d): rev.%d,base=%p,irq=%d\n",
- dev->number, revision, base, iadev->irq);)
+ dev->number, iadev->pci->revision, base, iadev->irq);)
/* filling the iphase dev structure */
iadev->mem = iadev->pci_map_size /2;
};
enum lanai_type {
- lanai2 = PCI_VENDOR_ID_EF_ATM_LANAI2,
- lanaihb = PCI_VENDOR_ID_EF_ATM_LANAIHB
+ lanai2 = PCI_DEVICE_ID_EF_ATM_LANAI2,
+ lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB
};
struct lanai_dev_stats {
struct atm_vcc *cbrvcc;
int number;
int board_rev;
- u8 pci_revision;
/* TODO - look at race conditions with maintence of conf1/conf2 */
/* TODO - transmit locking: should we use _irq not _irqsave? */
/* TODO - organize above in some rational fashion (see <asm/cache.h>) */
"(itf %d): No suitable DMA available.\n", lanai->number);
return -EBUSY;
}
- /* Get the pci revision byte */
- result = pci_read_config_byte(pci, PCI_REVISION_ID,
- &lanai->pci_revision);
- if (result != PCIBIOS_SUCCESSFUL) {
- printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
- "PCI_REVISION_ID: %d\n", lanai->number, result);
- return -EINVAL;
- }
result = pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &w);
if (result != PCIBIOS_SUCCESSFUL) {
printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
lanai_timed_poll_start(lanai);
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
"(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
- (int) lanai->pci_revision, (unsigned long) lanai->base,
+ (int) lanai->pci->revision, (unsigned long) lanai->base,
lanai->pci->irq,
atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
(unsigned int) lanai->magicno, lanai->num_vci);
if (left-- == 0)
return sprintf(page, "revision: board=%d, pci_if=%d\n",
- lanai->board_rev, (int) lanai->pci_revision);
+ lanai->board_rev, (int) lanai->pci->revision);
if (left-- == 0)
return sprintf(page, "EEPROM ESI: "
"%02X:%02X:%02X:%02X:%02X:%02X\n",
}
static struct pci_device_id lanai_pci_tbl[] = {
- {
- PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAI2,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
- },
- {
- PCI_VENDOR_ID_EF, PCI_VENDOR_ID_EF_ATM_LANAIHB,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0
- },
+ { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) },
+ { PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) },
{ 0, } /* terminal entry */
};
MODULE_DEVICE_TABLE(pci, lanai_pci_tbl);
struct zatm_dev *zatm_dev;
struct pci_dev *pci_dev;
unsigned short command;
- unsigned char revision;
int error,i,last;
unsigned long t0,t1,t2;
pci_dev = zatm_dev->pci_dev;
zatm_dev->base = pci_resource_start(pci_dev, 0);
zatm_dev->irq = pci_dev->irq;
- if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command)) ||
- (error = pci_read_config_byte(pci_dev,PCI_REVISION_ID,&revision))) {
+ if ((error = pci_read_config_word(pci_dev,PCI_COMMAND,&command))) {
printk(KERN_ERR DEV_LABEL "(itf %d): init error 0x%02x\n",
dev->number,error);
return -EINVAL;
}
eprom_get_esi(dev);
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d,base=0x%x,irq=%d,",
- dev->number,revision,zatm_dev->base,zatm_dev->irq);
+ dev->number,pci_dev->revision,zatm_dev->base,zatm_dev->irq);
/* reset uPD98401 */
zout(0,SWR);
while (!(zin(GSR) & uPD98401_INT_IND));
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include "base.h"
extern char *make_class_name(const char *name, struct kobject *kobj);
-extern void devres_release_all(struct device *dev);
+extern int devres_release_all(struct device *dev);
extern struct kset devices_subsys;
}
}
-static struct kobj_type ktype_bus = {
+static struct kobj_type bus_ktype = {
.sysfs_ops = &bus_sysfs_ops,
+};
+
+static int bus_uevent_filter(struct kset *kset, struct kobject *kobj)
+{
+ struct kobj_type *ktype = get_ktype(kobj);
+ if (ktype == &bus_ktype)
+ return 1;
+ return 0;
+}
+
+static struct kset_uevent_ops bus_uevent_ops = {
+ .filter = bus_uevent_filter,
};
-static decl_subsys(bus, &ktype_bus, NULL);
+static decl_subsys(bus, &bus_ktype, &bus_uevent_ops);
#ifdef CONFIG_HOTPLUG
bus->drivers_probe_attr.attr.name = "drivers_probe";
bus->drivers_probe_attr.attr.mode = S_IWUSR;
- bus->drivers_probe_attr.attr.owner = bus->owner;
bus->drivers_probe_attr.store = store_drivers_probe;
retval = bus_create_file(bus, &bus->drivers_probe_attr);
if (retval)
bus->drivers_autoprobe_attr.attr.name = "drivers_autoprobe";
bus->drivers_autoprobe_attr.attr.mode = S_IWUSR | S_IRUGO;
- bus->drivers_autoprobe_attr.attr.owner = bus->owner;
bus->drivers_autoprobe_attr.show = show_drivers_autoprobe;
bus->drivers_autoprobe_attr.store = store_drivers_autoprobe;
retval = bus_create_file(bus, &bus->drivers_autoprobe_attr);
if (error)
goto out_put_bus;
drv->kobj.kset = &bus->drivers;
- if ((error = kobject_register(&drv->kobj)))
+ error = kobject_register(&drv->kobj);
+ if (error)
goto out_put_bus;
if (drv->bus->drivers_autoprobe) {
if (bus->bus_attrs) {
for (i = 0; attr_name(bus->bus_attrs[i]); i++) {
- if ((error = bus_create_file(bus,&bus->bus_attrs[i])))
+ error = bus_create_file(bus,&bus->bus_attrs[i]);
+ if (error)
goto Err;
}
}
pr_debug("device class '%s': release.\n", cd->class_id);
- kfree(cd->devt_attr);
- cd->devt_attr = NULL;
-
if (cd->release)
cd->release(cd);
else if (cls->release)
return print_dev_t(buf, class_dev->devt);
}
+static struct class_device_attribute class_devt_attr =
+ __ATTR(dev, S_IRUGO, show_dev, NULL);
+
static ssize_t store_uevent(struct class_device *class_dev,
const char *buf, size_t count)
{
return count;
}
+static struct class_device_attribute class_uevent_attr =
+ __ATTR(uevent, S_IWUSR, NULL, store_uevent);
+
void class_device_initialize(struct class_device *class_dev)
{
kobj_set_kset_s(class_dev, class_obj_subsys);
&parent_class->subsys.kobj, "subsystem");
if (error)
goto out3;
- class_dev->uevent_attr.attr.name = "uevent";
- class_dev->uevent_attr.attr.mode = S_IWUSR;
- class_dev->uevent_attr.attr.owner = parent_class->owner;
- class_dev->uevent_attr.store = store_uevent;
- error = class_device_create_file(class_dev, &class_dev->uevent_attr);
+
+ error = class_device_create_file(class_dev, &class_uevent_attr);
if (error)
goto out3;
if (MAJOR(class_dev->devt)) {
- struct class_device_attribute *attr;
- attr = kzalloc(sizeof(*attr), GFP_KERNEL);
- if (!attr) {
- error = -ENOMEM;
- goto out4;
- }
- attr->attr.name = "dev";
- attr->attr.mode = S_IRUGO;
- attr->attr.owner = parent_class->owner;
- attr->show = show_dev;
- error = class_device_create_file(class_dev, attr);
- if (error) {
- kfree(attr);
+ error = class_device_create_file(class_dev, &class_devt_attr);
+ if (error)
goto out4;
- }
-
- class_dev->devt_attr = attr;
}
error = class_device_add_attrs(class_dev);
out6:
class_device_remove_attrs(class_dev);
out5:
- if (class_dev->devt_attr)
- class_device_remove_file(class_dev, class_dev->devt_attr);
+ if (MAJOR(class_dev->devt))
+ class_device_remove_file(class_dev, &class_devt_attr);
out4:
- class_device_remove_file(class_dev, &class_dev->uevent_attr);
+ class_device_remove_file(class_dev, &class_uevent_attr);
out3:
kobject_del(&class_dev->kobj);
out2:
sysfs_remove_link(&class_dev->kobj, "device");
}
sysfs_remove_link(&class_dev->kobj, "subsystem");
- class_device_remove_file(class_dev, &class_dev->uevent_attr);
- if (class_dev->devt_attr)
- class_device_remove_file(class_dev, class_dev->devt_attr);
+ class_device_remove_file(class_dev, &class_uevent_attr);
+ if (MAJOR(class_dev->devt))
+ class_device_remove_file(class_dev, &class_devt_attr);
class_device_remove_attrs(class_dev);
class_device_remove_groups(class_dev);
return count;
}
+static struct device_attribute uevent_attr =
+ __ATTR(uevent, S_IRUGO | S_IWUSR, show_uevent, store_uevent);
+
static int device_add_attributes(struct device *dev,
struct device_attribute *attrs)
{
return print_dev_t(buf, dev->devt);
}
+static struct device_attribute devt_attr =
+ __ATTR(dev, S_IRUGO, show_dev, NULL);
+
/*
* devices_subsys - structure to be registered with kobject core.
*/
blocking_notifier_call_chain(&dev->bus->bus_notifier,
BUS_NOTIFY_ADD_DEVICE, dev);
- dev->uevent_attr.attr.name = "uevent";
- dev->uevent_attr.attr.mode = S_IRUGO | S_IWUSR;
- if (dev->driver)
- dev->uevent_attr.attr.owner = dev->driver->owner;
- dev->uevent_attr.store = store_uevent;
- dev->uevent_attr.show = show_uevent;
- error = device_create_file(dev, &dev->uevent_attr);
+ error = device_create_file(dev, &uevent_attr);
if (error)
goto attrError;
if (MAJOR(dev->devt)) {
- struct device_attribute *attr;
- attr = kzalloc(sizeof(*attr), GFP_KERNEL);
- if (!attr) {
- error = -ENOMEM;
- goto ueventattrError;
- }
- attr->attr.name = "dev";
- attr->attr.mode = S_IRUGO;
- if (dev->driver)
- attr->attr.owner = dev->driver->owner;
- attr->show = show_dev;
- error = device_create_file(dev, attr);
- if (error) {
- kfree(attr);
+ error = device_create_file(dev, &devt_attr);
+ if (error)
goto ueventattrError;
- }
-
- dev->devt_attr = attr;
}
if (dev->class) {
}
}
- if ((error = device_add_attrs(dev)))
+ error = device_add_attrs(dev);
+ if (error)
goto AttrsError;
- if ((error = device_pm_add(dev)))
+ error = device_pm_add(dev);
+ if (error)
goto PMError;
- if ((error = bus_add_device(dev)))
+ error = bus_add_device(dev);
+ if (error)
goto BusError;
kobject_uevent(&dev->kobj, KOBJ_ADD);
bus_attach_device(dev);
BUS_NOTIFY_DEL_DEVICE, dev);
device_remove_attrs(dev);
AttrsError:
- if (dev->devt_attr) {
- device_remove_file(dev, dev->devt_attr);
- kfree(dev->devt_attr);
- }
+ if (MAJOR(dev->devt))
+ device_remove_file(dev, &devt_attr);
if (dev->class) {
sysfs_remove_link(&dev->kobj, "subsystem");
}
}
ueventattrError:
- device_remove_file(dev, &dev->uevent_attr);
+ device_remove_file(dev, &uevent_attr);
attrError:
kobject_uevent(&dev->kobj, KOBJ_REMOVE);
kobject_del(&dev->kobj);
if (parent)
klist_del(&dev->knode_parent);
- if (dev->devt_attr) {
- device_remove_file(dev, dev->devt_attr);
- kfree(dev->devt_attr);
- }
+ if (MAJOR(dev->devt))
+ device_remove_file(dev, &devt_attr);
if (dev->class) {
sysfs_remove_link(&dev->kobj, "subsystem");
/* If this is not a "fake" compatible device, remove the
up(&dev->class->sem);
}
}
- device_remove_file(dev, &dev->uevent_attr);
+ device_remove_file(dev, &uevent_attr);
device_remove_attrs(dev);
bus_remove_device(dev);
return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
}
-/**
- * device_release_driver - manually detach device from driver.
- * @dev: device.
- *
- * Manually detach device from driver.
- *
+/*
* __device_release_driver() must be called with @dev->sem held.
- * When called for a USB interface, @dev->parent->sem must be held
- * as well.
+ * When called for a USB interface, @dev->parent->sem must be held as well.
*/
-
static void __device_release_driver(struct device * dev)
{
struct device_driver * drv;
- drv = dev->driver;
+ drv = get_driver(dev->driver);
if (drv) {
- get_driver(drv);
driver_sysfs_remove(dev);
sysfs_remove_link(&dev->kobj, "driver");
klist_remove(&dev->knode_driver);
}
}
+/**
+ * device_release_driver - manually detach device from driver.
+ * @dev: device.
+ *
+ * Manually detach device from driver.
+ * When called for a USB interface, @dev->parent->sem must be held.
+ */
void device_release_driver(struct device * dev)
{
/*
#include <linux/device.h>
#include <linux/module.h>
+#include "base.h"
+
struct devres_node {
struct list_head entry;
dr_release_t release;
static DEVICE_ATTR(loading, 0644, firmware_loading_show, firmware_loading_store);
static ssize_t
-firmware_data_read(struct kobject *kobj,
+firmware_data_read(struct kobject *kobj, struct bin_attribute *bin_attr,
char *buffer, loff_t offset, size_t count)
{
struct device *dev = to_dev(kobj);
* the driver as a firmware image.
**/
static ssize_t
-firmware_data_write(struct kobject *kobj,
+firmware_data_write(struct kobject *kobj, struct bin_attribute *bin_attr,
char *buffer, loff_t offset, size_t count)
{
struct device *dev = to_dev(kobj);
}
static struct bin_attribute firmware_attr_data_tmpl = {
- .attr = {.name = "data", .mode = 0644, .owner = THIS_MODULE},
+ .attr = {.name = "data", .mode = 0644},
.size = 0,
.read = firmware_data_read,
.write = firmware_data_write,
*/
#include <linux/device.h>
+#include <linux/mutex.h>
+
#include "power.h"
LIST_HEAD(dpm_active);
LIST_HEAD(dpm_off);
LIST_HEAD(dpm_off_irq);
-DECLARE_MUTEX(dpm_sem);
-DECLARE_MUTEX(dpm_list_sem);
+DEFINE_MUTEX(dpm_mtx);
+DEFINE_MUTEX(dpm_list_mtx);
int (*platform_enable_wakeup)(struct device *dev, int is_on);
-
-/**
- * device_pm_set_parent - Specify power dependency.
- * @dev: Device who needs power.
- * @parent: Device that supplies power.
- *
- * This function is used to manually describe a power-dependency
- * relationship. It may be used to specify a transversal relationship
- * (where the power supplier is not the physical (or electrical)
- * ancestor of a specific device.
- * The effect of this is that the supplier will not be powered down
- * before the power dependent.
- */
-
-void device_pm_set_parent(struct device * dev, struct device * parent)
-{
- put_device(dev->power.pm_parent);
- dev->power.pm_parent = get_device(parent);
-}
-EXPORT_SYMBOL_GPL(device_pm_set_parent);
-
-int device_pm_add(struct device * dev)
+int device_pm_add(struct device *dev)
{
int error;
pr_debug("PM: Adding info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
- down(&dpm_list_sem);
+ mutex_lock(&dpm_list_mtx);
list_add_tail(&dev->power.entry, &dpm_active);
- device_pm_set_parent(dev, dev->parent);
- if ((error = dpm_sysfs_add(dev)))
+ error = dpm_sysfs_add(dev);
+ if (error)
list_del(&dev->power.entry);
- up(&dpm_list_sem);
+ mutex_unlock(&dpm_list_mtx);
return error;
}
-void device_pm_remove(struct device * dev)
+void device_pm_remove(struct device *dev)
{
pr_debug("PM: Removing info for %s:%s\n",
dev->bus ? dev->bus->name : "No Bus",
kobject_name(&dev->kobj));
- down(&dpm_list_sem);
+ mutex_lock(&dpm_list_mtx);
dpm_sysfs_remove(dev);
- put_device(dev->power.pm_parent);
list_del_init(&dev->power.entry);
- up(&dpm_list_sem);
+ mutex_unlock(&dpm_list_mtx);
}
/*
* Used to synchronize global power management operations.
*/
-extern struct semaphore dpm_sem;
+extern struct mutex dpm_mtx;
/*
* Used to serialize changes to the dpm_* lists.
*/
-extern struct semaphore dpm_list_sem;
+extern struct mutex dpm_list_mtx;
/*
* The PM lists.
down(&dev->sem);
- if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state.event) {
- dev_err(dev, "PM: resume from %d, parent %s still %d\n",
- dev->power.power_state.event,
- dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state.event);
- }
-
if (dev->bus && dev->bus->resume) {
dev_dbg(dev,"resuming\n");
error = dev->bus->resume(dev);
*/
void dpm_resume(void)
{
- down(&dpm_list_sem);
+ mutex_lock(&dpm_list_mtx);
while(!list_empty(&dpm_off)) {
struct list_head * entry = dpm_off.next;
struct device * dev = to_device(entry);
get_device(dev);
list_move_tail(entry, &dpm_active);
- up(&dpm_list_sem);
- if (!dev->power.prev_state.event)
- resume_device(dev);
- down(&dpm_list_sem);
+ mutex_unlock(&dpm_list_mtx);
+ resume_device(dev);
+ mutex_lock(&dpm_list_mtx);
put_device(dev);
}
- up(&dpm_list_sem);
+ mutex_unlock(&dpm_list_mtx);
}
void device_resume(void)
{
might_sleep();
- down(&dpm_sem);
+ mutex_lock(&dpm_mtx);
dpm_resume();
- up(&dpm_sem);
+ mutex_unlock(&dpm_mtx);
}
EXPORT_SYMBOL_GPL(device_resume);
void dpm_runtime_resume(struct device * dev)
{
- down(&dpm_sem);
+ mutex_lock(&dpm_mtx);
runtime_resume(dev);
- up(&dpm_sem);
+ mutex_unlock(&dpm_mtx);
}
EXPORT_SYMBOL(dpm_runtime_resume);
{
int error = 0;
- down(&dpm_sem);
+ mutex_lock(&dpm_mtx);
if (dev->power.power_state.event == state.event)
goto Done;
if (!(error = suspend_device(dev, state)))
dev->power.power_state = state;
Done:
- up(&dpm_sem);
+ mutex_unlock(&dpm_mtx);
return error;
}
EXPORT_SYMBOL(dpm_runtime_suspend);
*/
void dpm_set_power_state(struct device * dev, pm_message_t state)
{
- down(&dpm_sem);
+ mutex_lock(&dpm_mtx);
dev->power.power_state = state;
- up(&dpm_sem);
+ mutex_unlock(&dpm_mtx);
}
#endif /* 0 */
}
+static void
+suspend_device_dbg(struct device *dev, pm_message_t state, char *info)
+{
+ dev_dbg(dev, "%s%s%s\n", info, suspend_verb(state.event),
+ ((state.event == PM_EVENT_SUSPEND) && device_may_wakeup(dev)) ?
+ ", may wakeup" : "");
+}
+
/**
* suspend_device - Save state of one device.
* @dev: Device.
dev_dbg(dev, "PM: suspend %d-->%d\n",
dev->power.power_state.event, state.event);
}
- if (dev->power.pm_parent
- && dev->power.pm_parent->power.power_state.event) {
- dev_err(dev,
- "PM: suspend %d->%d, parent %s already %d\n",
- dev->power.power_state.event, state.event,
- dev->power.pm_parent->bus_id,
- dev->power.pm_parent->power.power_state.event);
- }
-
- dev->power.prev_state = dev->power.power_state;
- if (dev->class && dev->class->suspend && !dev->power.power_state.event) {
- dev_dbg(dev, "class %s%s\n",
- suspend_verb(state.event),
- ((state.event == PM_EVENT_SUSPEND)
- && device_may_wakeup(dev))
- ? ", may wakeup"
- : ""
- );
+ if (dev->class && dev->class->suspend) {
+ suspend_device_dbg(dev, state, "class ");
error = dev->class->suspend(dev, state);
suspend_report_result(dev->class->suspend, error);
}
- if (!error && dev->type && dev->type->suspend && !dev->power.power_state.event) {
- dev_dbg(dev, "%s%s\n",
- suspend_verb(state.event),
- ((state.event == PM_EVENT_SUSPEND)
- && device_may_wakeup(dev))
- ? ", may wakeup"
- : ""
- );
+ if (!error && dev->type && dev->type->suspend) {
+ suspend_device_dbg(dev, state, "type ");
error = dev->type->suspend(dev, state);
suspend_report_result(dev->type->suspend, error);
}
- if (!error && dev->bus && dev->bus->suspend && !dev->power.power_state.event) {
- dev_dbg(dev, "%s%s\n",
- suspend_verb(state.event),
- ((state.event == PM_EVENT_SUSPEND)
- && device_may_wakeup(dev))
- ? ", may wakeup"
- : ""
- );
+ if (!error && dev->bus && dev->bus->suspend) {
+ suspend_device_dbg(dev, state, "");
error = dev->bus->suspend(dev, state);
suspend_report_result(dev->bus->suspend, error);
}
/*
* This is called with interrupts off, only a single CPU
- * running. We can't do down() on a semaphore (and we don't
+ * running. We can't acquire a mutex or semaphore (and we don't
* need the protection)
*/
static int suspend_device_late(struct device *dev, pm_message_t state)
{
int error = 0;
- if (dev->bus && dev->bus->suspend_late && !dev->power.power_state.event) {
- dev_dbg(dev, "LATE %s%s\n",
- suspend_verb(state.event),
- ((state.event == PM_EVENT_SUSPEND)
- && device_may_wakeup(dev))
- ? ", may wakeup"
- : ""
- );
+ if (dev->bus && dev->bus->suspend_late) {
+ suspend_device_dbg(dev, state, "LATE ");
error = dev->bus->suspend_late(dev, state);
suspend_report_result(dev->bus->suspend_late, error);
}
int error = 0;
might_sleep();
- down(&dpm_sem);
- down(&dpm_list_sem);
+ mutex_lock(&dpm_mtx);
+ mutex_lock(&dpm_list_mtx);
while (!list_empty(&dpm_active) && error == 0) {
struct list_head * entry = dpm_active.prev;
struct device * dev = to_device(entry);
get_device(dev);
- up(&dpm_list_sem);
+ mutex_unlock(&dpm_list_mtx);
error = suspend_device(dev, state);
- down(&dpm_list_sem);
+ mutex_lock(&dpm_list_mtx);
/* Check if the device got removed */
if (!list_empty(&dev->power.entry)) {
error == -EAGAIN ? " (please convert to suspend_late)" : "");
put_device(dev);
}
- up(&dpm_list_sem);
+ mutex_unlock(&dpm_list_mtx);
if (error)
dpm_resume();
- up(&dpm_sem);
+ mutex_unlock(&dpm_mtx);
return error;
}
#include <linux/string.h>
#include <linux/pm.h>
#include <linux/device.h>
-#include <asm/semaphore.h>
+#include <linux/mutex.h>
#include "base.h"
static LIST_HEAD(sysdev_drivers);
-static DECLARE_MUTEX(sysdev_drivers_lock);
+static DEFINE_MUTEX(sysdev_drivers_lock);
/**
* sysdev_driver_register - Register auxillary driver
int sysdev_driver_register(struct sysdev_class * cls,
struct sysdev_driver * drv)
{
- down(&sysdev_drivers_lock);
+ mutex_lock(&sysdev_drivers_lock);
if (cls && kset_get(&cls->kset)) {
list_add_tail(&drv->entry, &cls->drivers);
}
} else
list_add_tail(&drv->entry, &sysdev_drivers);
- up(&sysdev_drivers_lock);
+ mutex_unlock(&sysdev_drivers_lock);
return 0;
}
void sysdev_driver_unregister(struct sysdev_class * cls,
struct sysdev_driver * drv)
{
- down(&sysdev_drivers_lock);
+ mutex_lock(&sysdev_drivers_lock);
list_del_init(&drv->entry);
if (cls) {
if (drv->remove) {
}
kset_put(&cls->kset);
}
- up(&sysdev_drivers_lock);
+ mutex_unlock(&sysdev_drivers_lock);
}
EXPORT_SYMBOL_GPL(sysdev_driver_register);
if (!error) {
struct sysdev_driver * drv;
- down(&sysdev_drivers_lock);
+ mutex_lock(&sysdev_drivers_lock);
/* Generic notification is implicit, because it's that
* code that should have called us.
*/
if (drv->add)
drv->add(sysdev);
}
- up(&sysdev_drivers_lock);
+ mutex_unlock(&sysdev_drivers_lock);
}
return error;
}
{
struct sysdev_driver * drv;
- down(&sysdev_drivers_lock);
+ mutex_lock(&sysdev_drivers_lock);
list_for_each_entry(drv, &sysdev_drivers, entry) {
if (drv->remove)
drv->remove(sysdev);
if (drv->remove)
drv->remove(sysdev);
}
- up(&sysdev_drivers_lock);
+ mutex_unlock(&sysdev_drivers_lock);
kobject_unregister(&sysdev->kobj);
}
pr_debug("Shutting Down System Devices\n");
- down(&sysdev_drivers_lock);
+ mutex_lock(&sysdev_drivers_lock);
list_for_each_entry_reverse(cls, &system_subsys.list,
kset.kobj.entry) {
struct sys_device * sysdev;
cls->shutdown(sysdev);
}
}
- up(&sysdev_drivers_lock);
+ mutex_unlock(&sysdev_drivers_lock);
}
static void __sysdev_resume(struct sys_device *dev)
**********************************************************/
#define DEF_ATTR(_obj,_name,_mode) \
- static struct attribute _obj = { \
- .name = _name, .owner = THIS_MODULE, .mode = _mode }
+ static struct attribute _obj = { .name = _name, .mode = _mode }
/**********************************************************
/sys/class/pktcdvd/pktcdvd[0-7]/
#define __pending_q(husb, type) (&husb->pending_q[type-1])
#define __completed_q(husb, type) (&husb->completed_q[type-1])
#define __transmit_q(husb, type) (&husb->transmit_q[type-1])
-#define __reassembly(husb, type) (husb->reassembly[type-1])
static inline struct _urb *__get_completed(struct hci_usb *husb, int type)
{
kfree(urb->transfer_buffer);
_urb_free(_urb);
}
-
- /* Release reassembly buffers */
- if (husb->reassembly[i]) {
- kfree_skb(husb->reassembly[i]);
- husb->reassembly[i] = NULL;
- }
}
}
return 0;
}
-static inline int __recv_frame(struct hci_usb *husb, int type, void *data, int count)
-{
- BT_DBG("%s type %d data %p count %d", husb->hdev->name, type, data, count);
-
- husb->hdev->stat.byte_rx += count;
-
- while (count) {
- struct sk_buff *skb = __reassembly(husb, type);
- struct { int expect; } *scb;
- int len = 0;
-
- if (!skb) {
- /* Start of the frame */
-
- switch (type) {
- case HCI_EVENT_PKT:
- if (count >= HCI_EVENT_HDR_SIZE) {
- struct hci_event_hdr *h = data;
- len = HCI_EVENT_HDR_SIZE + h->plen;
- } else
- return -EILSEQ;
- break;
-
- case HCI_ACLDATA_PKT:
- if (count >= HCI_ACL_HDR_SIZE) {
- struct hci_acl_hdr *h = data;
- len = HCI_ACL_HDR_SIZE + __le16_to_cpu(h->dlen);
- } else
- return -EILSEQ;
- break;
-#ifdef CONFIG_BT_HCIUSB_SCO
- case HCI_SCODATA_PKT:
- if (count >= HCI_SCO_HDR_SIZE) {
- struct hci_sco_hdr *h = data;
- len = HCI_SCO_HDR_SIZE + h->dlen;
- } else
- return -EILSEQ;
- break;
-#endif
- }
- BT_DBG("new packet len %d", len);
-
- skb = bt_skb_alloc(len, GFP_ATOMIC);
- if (!skb) {
- BT_ERR("%s no memory for the packet", husb->hdev->name);
- return -ENOMEM;
- }
- skb->dev = (void *) husb->hdev;
- bt_cb(skb)->pkt_type = type;
-
- __reassembly(husb, type) = skb;
-
- scb = (void *) skb->cb;
- scb->expect = len;
- } else {
- /* Continuation */
- scb = (void *) skb->cb;
- len = scb->expect;
- }
-
- len = min(len, count);
-
- memcpy(skb_put(skb, len), data, len);
-
- scb->expect -= len;
- if (!scb->expect) {
- /* Complete frame */
- __reassembly(husb, type) = NULL;
- bt_cb(skb)->pkt_type = type;
- hci_recv_frame(skb);
- }
-
- count -= len; data += len;
- }
- return 0;
-}
-
static void hci_usb_rx_complete(struct urb *urb)
{
struct _urb *_urb = container_of(urb, struct _urb, urb);
urb->iso_frame_desc[i].actual_length);
if (!urb->iso_frame_desc[i].status)
- __recv_frame(husb, _urb->type,
+ hci_recv_fragment(husb->hdev, _urb->type,
urb->transfer_buffer + urb->iso_frame_desc[i].offset,
urb->iso_frame_desc[i].actual_length);
}
;
#endif
} else {
- err = __recv_frame(husb, _urb->type, urb->transfer_buffer, count);
+ err = hci_recv_fragment(husb->hdev, _urb->type, urb->transfer_buffer, count);
if (err < 0) {
BT_ERR("%s corrupted packet: type %d count %d",
husb->hdev->name, _urb->type, count);
struct hci_dev *hdev;
unsigned long state;
-
+
struct usb_device *udev;
-
+
struct usb_host_endpoint *bulk_in_ep;
struct usb_host_endpoint *bulk_out_ep;
struct usb_host_endpoint *intr_in_ep;
__u8 ctrl_req;
struct sk_buff_head transmit_q[4];
- struct sk_buff *reassembly[4]; /* Reassembly buffers */
rwlock_t completion_lock;
return total;
}
-static loff_t vhci_llseek(struct file *file, loff_t offset, int origin)
-{
- return -ESPIPE;
-}
-
static ssize_t vhci_read(struct file *file,
char __user *buf, size_t count, loff_t *pos)
{
static const struct file_operations vhci_fops = {
.owner = THIS_MODULE,
- .llseek = vhci_llseek,
.read = vhci_read,
.write = vhci_write,
.poll = vhci_poll,
config GEN_RTC
tristate "Generic /dev/rtc emulation"
- depends on RTC!=y && !IA64 && !ARM && !M32R && !SPARC && !FRV && !S390 && !SUPERH
+ depends on RTC!=y && !IA64 && !ARM && !M32R && !MIPS && !SPARC && !FRV && !S390 && !SUPERH
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
* erratum 46: Setup violation on AGP SBA pins - Disable side band addressing.
* With this lot disabled, we should prevent lockups. */
if (agp_bridge->dev->device == PCI_DEVICE_ID_AMD_FE_GATE_700E) {
- u8 revision=0;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &revision);
- if (revision == 0x10 || revision == 0x11) {
+ if (pdev->revision == 0x10 || pdev->revision == 0x11) {
agp_bridge->flags = AGP_ERRATA_FASTWRITES;
agp_bridge->flags |= AGP_ERRATA_SBA;
agp_bridge->flags |= AGP_ERRATA_1X;
static void __devinit amd8151_init(struct pci_dev *pdev, struct agp_bridge_data *bridge)
{
char *revstring;
- u8 rev_id;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
- switch (rev_id) {
+ switch (pdev->revision) {
case 0x01: revstring="A0"; break;
case 0x02: revstring="A1"; break;
case 0x11: revstring="B0"; break;
* Work around errata.
* Chips before B2 stepping incorrectly reporting v3.5
*/
- if (rev_id < 0x13) {
+ if (pdev->revision < 0x13) {
printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
bridge->major_version = 3;
bridge->minor_version = 0;
static int __init agp_init(void)
{
if (!agp_off)
- printk(KERN_INFO "Linux agpgart interface v%d.%d (c) Dave Jones\n",
+ printk(KERN_INFO "Linux agpgart interface v%d.%d\n",
AGPGART_VERSION_MAJOR, AGPGART_VERSION_MINOR);
return 0;
}
int err;
bmc->device_id_attr.attr.name = "device_id";
- bmc->device_id_attr.attr.owner = THIS_MODULE;
bmc->device_id_attr.attr.mode = S_IRUGO;
bmc->device_id_attr.show = device_id_show;
bmc->provides_dev_sdrs_attr.attr.name = "provides_device_sdrs";
- bmc->provides_dev_sdrs_attr.attr.owner = THIS_MODULE;
bmc->provides_dev_sdrs_attr.attr.mode = S_IRUGO;
bmc->provides_dev_sdrs_attr.show = provides_dev_sdrs_show;
bmc->revision_attr.attr.name = "revision";
- bmc->revision_attr.attr.owner = THIS_MODULE;
bmc->revision_attr.attr.mode = S_IRUGO;
bmc->revision_attr.show = revision_show;
bmc->firmware_rev_attr.attr.name = "firmware_revision";
- bmc->firmware_rev_attr.attr.owner = THIS_MODULE;
bmc->firmware_rev_attr.attr.mode = S_IRUGO;
bmc->firmware_rev_attr.show = firmware_rev_show;
bmc->version_attr.attr.name = "ipmi_version";
- bmc->version_attr.attr.owner = THIS_MODULE;
bmc->version_attr.attr.mode = S_IRUGO;
bmc->version_attr.show = ipmi_version_show;
bmc->add_dev_support_attr.attr.name = "additional_device_support";
- bmc->add_dev_support_attr.attr.owner = THIS_MODULE;
bmc->add_dev_support_attr.attr.mode = S_IRUGO;
bmc->add_dev_support_attr.show = add_dev_support_show;
bmc->manufacturer_id_attr.attr.name = "manufacturer_id";
- bmc->manufacturer_id_attr.attr.owner = THIS_MODULE;
bmc->manufacturer_id_attr.attr.mode = S_IRUGO;
bmc->manufacturer_id_attr.show = manufacturer_id_show;
bmc->product_id_attr.attr.name = "product_id";
- bmc->product_id_attr.attr.owner = THIS_MODULE;
bmc->product_id_attr.attr.mode = S_IRUGO;
bmc->product_id_attr.show = product_id_show;
bmc->guid_attr.attr.name = "guid";
- bmc->guid_attr.attr.owner = THIS_MODULE;
bmc->guid_attr.attr.mode = S_IRUGO;
bmc->guid_attr.show = guid_show;
bmc->aux_firmware_rev_attr.attr.name = "aux_firmware_revision";
- bmc->aux_firmware_rev_attr.attr.owner = THIS_MODULE;
bmc->aux_firmware_rev_attr.attr.mode = S_IRUGO;
bmc->aux_firmware_rev_attr.show = aux_firmware_rev_show;
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/platform_device.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/init.h>
-#include <linux/irq.h>
#include <linux/interrupt.h>
+#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/spinlock.h>
#include <linux/types.h>
-#include <asm/cpu.h>
#include <asm/io.h>
#include <asm/vr41xx/giu.h>
#include <asm/vr41xx/irq.h>
module_param(major, int, 0);
MODULE_PARM_DESC(major, "Major device number");
-#define GIU_TYPE1_START 0x0b000100UL
-#define GIU_TYPE1_SIZE 0x20UL
-
-#define GIU_TYPE2_START 0x0f000140UL
-#define GIU_TYPE2_SIZE 0x20UL
-
-#define GIU_TYPE3_START 0x0f000140UL
-#define GIU_TYPE3_SIZE 0x28UL
-
-#define GIU_PULLUPDOWN_START 0x0b0002e0UL
-#define GIU_PULLUPDOWN_SIZE 0x04UL
-
#define GIUIOSELL 0x00
#define GIUIOSELH 0x02
#define GIUPIODL 0x04
#define GPIO_HAS_INTERRUPT_EDGE_SELECT 0x0100
static spinlock_t giu_lock;
-static struct resource *giu_resource1;
-static struct resource *giu_resource2;
static unsigned long giu_flags;
static unsigned int giu_nr_pins;
giu_set(GIUINTHTSELL, mask);
else
giu_clear(GIUINTHTSELL, mask);
- if (current_cpu_data.cputype == CPU_VR4133) {
+ if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
switch (trigger) {
case IRQ_TRIGGER_EDGE_FALLING:
giu_set(GIUFEDGEINHL, mask);
giu_set(GIUINTHTSELH, mask);
else
giu_clear(GIUINTHTSELH, mask);
- if (current_cpu_data.cputype == CPU_VR4133) {
+ if (giu_flags & GPIO_HAS_INTERRUPT_EDGE_SELECT) {
switch (trigger) {
case IRQ_TRIGGER_EDGE_FALLING:
giu_set(GIUFEDGEINHH, mask);
giu_write(GIUINTSTATH, mask);
}
}
-
EXPORT_SYMBOL_GPL(vr41xx_set_irq_trigger);
void vr41xx_set_irq_level(unsigned int pin, irq_level_t level)
giu_write(GIUINTSTATH, mask);
}
}
-
EXPORT_SYMBOL_GPL(vr41xx_set_irq_level);
gpio_data_t vr41xx_gpio_get_pin(unsigned int pin)
return GPIO_DATA_LOW;
}
-
EXPORT_SYMBOL_GPL(vr41xx_gpio_get_pin);
int vr41xx_gpio_set_pin(unsigned int pin, gpio_data_t data)
return 0;
}
-
EXPORT_SYMBOL_GPL(vr41xx_gpio_set_pin);
int vr41xx_gpio_set_direction(unsigned int pin, gpio_direction_t dir)
return 0;
}
-
EXPORT_SYMBOL_GPL(vr41xx_gpio_set_direction);
int vr41xx_gpio_pullupdown(unsigned int pin, gpio_pull_t pull)
return 0;
}
-
EXPORT_SYMBOL_GPL(vr41xx_gpio_pullupdown);
static ssize_t gpio_read(struct file *file, char __user *buf, size_t len,
static int __devinit giu_probe(struct platform_device *dev)
{
- unsigned long start, size, flags = 0;
- unsigned int nr_pins = 0, trigger, i, pin;
- struct resource *res1, *res2 = NULL;
- void *base;
+ struct resource *res;
+ unsigned int trigger, i, pin;
struct irq_chip *chip;
- int retval;
-
- switch (current_cpu_data.cputype) {
- case CPU_VR4111:
- case CPU_VR4121:
- start = GIU_TYPE1_START;
- size = GIU_TYPE1_SIZE;
- flags = GPIO_HAS_PULLUPDOWN_IO;
- nr_pins = 50;
+ int irq, retval;
+
+ switch (dev->id) {
+ case GPIO_50PINS_PULLUPDOWN:
+ giu_flags = GPIO_HAS_PULLUPDOWN_IO;
+ giu_nr_pins = 50;
break;
- case CPU_VR4122:
- case CPU_VR4131:
- start = GIU_TYPE2_START;
- size = GIU_TYPE2_SIZE;
- nr_pins = 36;
+ case GPIO_36PINS:
+ giu_nr_pins = 36;
break;
- case CPU_VR4133:
- start = GIU_TYPE3_START;
- size = GIU_TYPE3_SIZE;
- flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
- nr_pins = 48;
+ case GPIO_48PINS_EDGE_SELECT:
+ giu_flags = GPIO_HAS_INTERRUPT_EDGE_SELECT;
+ giu_nr_pins = 48;
break;
default:
+ printk(KERN_ERR "GIU: unknown ID %d\n", dev->id);
return -ENODEV;
}
- res1 = request_mem_region(start, size, "GIU");
- if (res1 == NULL)
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ if (!res)
return -EBUSY;
- base = ioremap(start, size);
- if (base == NULL) {
- release_resource(res1);
+ giu_base = ioremap(res->start, res->end - res->start + 1);
+ if (!giu_base)
return -ENOMEM;
- }
-
- if (flags & GPIO_HAS_PULLUPDOWN_IO) {
- res2 = request_mem_region(GIU_PULLUPDOWN_START, GIU_PULLUPDOWN_SIZE, "GIU");
- if (res2 == NULL) {
- iounmap(base);
- release_resource(res1);
- return -EBUSY;
- }
- }
retval = register_chrdev(major, "GIU", &gpio_fops);
if (retval < 0) {
- iounmap(base);
- release_resource(res1);
- release_resource(res2);
+ iounmap(giu_base);
+ giu_base = NULL;
return retval;
}
}
spin_lock_init(&giu_lock);
- giu_base = base;
- giu_resource1 = res1;
- giu_resource2 = res2;
- giu_flags = flags;
- giu_nr_pins = nr_pins;
giu_write(GIUINTENL, 0);
giu_write(GIUINTENH, 0);
}
- return cascade_irq(GIUINT_IRQ, giu_get_irq);
+ irq = platform_get_irq(dev, 0);
+ if (irq < 0 || irq >= NR_IRQS)
+ return -EBUSY;
+
+ return cascade_irq(irq, giu_get_irq);
}
static int __devexit giu_remove(struct platform_device *dev)
{
- iounmap(giu_base);
-
- release_resource(giu_resource1);
- if (giu_flags & GPIO_HAS_PULLUPDOWN_IO)
- release_resource(giu_resource2);
+ if (giu_base) {
+ iounmap(giu_base);
+ giu_base = NULL;
+ }
return 0;
}
-static struct platform_device *giu_platform_device;
-
static struct platform_driver giu_device_driver = {
.probe = giu_probe,
.remove = __devexit_p(giu_remove),
static int __init vr41xx_giu_init(void)
{
- int retval;
-
- giu_platform_device = platform_device_alloc("GIU", -1);
- if (!giu_platform_device)
- return -ENOMEM;
-
- retval = platform_device_add(giu_platform_device);
- if (retval < 0) {
- platform_device_put(giu_platform_device);
- return retval;
- }
-
- retval = platform_driver_register(&giu_device_driver);
- if (retval < 0)
- platform_device_unregister(giu_platform_device);
-
- return retval;
+ return platform_driver_register(&giu_device_driver);
}
static void __exit vr41xx_giu_exit(void)
{
platform_driver_unregister(&giu_device_driver);
-
- platform_device_unregister(giu_platform_device);
}
module_init(vr41xx_giu_init);
*/
static void __devinit acpi_pm_check_blacklist(struct pci_dev *dev)
{
- u8 rev;
-
if (acpi_pm_good)
return;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
/* the bug has been fixed in PIIX4M */
- if (rev < 3) {
+ if (dev->revision < 3) {
printk(KERN_WARNING "* Found PM-Timer Bug on the chipset."
" Due to workarounds for a bug,\n"
"* this clock source is slow. Consider trying"
/* set up files for this cpu device */
drv_attr = cpufreq_driver->attr;
while ((drv_attr) && (*drv_attr)) {
- sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
+ ret = sysfs_create_file(&policy->kobj, &((*drv_attr)->attr));
+ if (ret)
+ goto err_out_driver_exit;
drv_attr++;
}
- if (cpufreq_driver->get)
- sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
- if (cpufreq_driver->target)
- sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
+ if (cpufreq_driver->get){
+ ret = sysfs_create_file(&policy->kobj, &cpuinfo_cur_freq.attr);
+ if (ret)
+ goto err_out_driver_exit;
+ }
+ if (cpufreq_driver->target){
+ ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
+ if (ret)
+ goto err_out_driver_exit;
+ }
spin_lock_irqsave(&cpufreq_driver_lock, flags);
for_each_cpu_mask(j, policy->cpus) {
static inline cputime64_t get_cpu_idle_time(unsigned int cpu)
{
- cputime64_t retval;
+ cputime64_t idle_time;
+ cputime64_t cur_jiffies;
+ cputime64_t busy_time;
- retval = cputime64_add(kstat_cpu(cpu).cpustat.idle,
- kstat_cpu(cpu).cpustat.iowait);
+ cur_jiffies = jiffies64_to_cputime64(get_jiffies_64());
+ busy_time = cputime64_add(kstat_cpu(cpu).cpustat.user,
+ kstat_cpu(cpu).cpustat.system);
- if (dbs_tuners_ins.ignore_nice)
- retval = cputime64_add(retval, kstat_cpu(cpu).cpustat.nice);
+ busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.irq);
+ busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.softirq);
+ busy_time = cputime64_add(busy_time, kstat_cpu(cpu).cpustat.steal);
- return retval;
+ if (!dbs_tuners_ins.ignore_nice) {
+ busy_time = cputime64_add(busy_time,
+ kstat_cpu(cpu).cpustat.nice);
+ }
+
+ idle_time = cputime64_sub(cur_jiffies, busy_time);
+ return idle_time;
}
/*
static void dbs_check_cpu(struct cpu_dbs_info_s *this_dbs_info)
{
unsigned int idle_ticks, total_ticks;
- unsigned int load;
+ unsigned int load = 0;
cputime64_t cur_jiffies;
struct cpufreq_policy *policy;
cur_jiffies = jiffies64_to_cputime64(get_jiffies_64());
total_ticks = (unsigned int) cputime64_sub(cur_jiffies,
this_dbs_info->prev_cpu_wall);
- this_dbs_info->prev_cpu_wall = cur_jiffies;
+ this_dbs_info->prev_cpu_wall = get_jiffies_64();
+
if (!total_ticks)
return;
/*
if (tmp_idle_ticks < idle_ticks)
idle_ticks = tmp_idle_ticks;
}
- load = (100 * (total_ticks - idle_ticks)) / total_ticks;
+ if (likely(total_ticks > idle_ticks))
+ load = (100 * (total_ticks - idle_ticks)) / total_ticks;
/* Check for frequency increase */
if (load > dbs_tuners_ins.up_threshold) {
#define CPUFREQ_STATDEVICE_ATTR(_name,_mode,_show) \
static struct freq_attr _attr_##_name = {\
- .attr = {.name = __stringify(_name), .owner = THIS_MODULE, \
- .mode = _mode, }, \
+ .attr = {.name = __stringify(_name), .mode = _mode, }, \
.show = _show,\
};
static unsigned int cpu_is_managed[NR_CPUS];
static DEFINE_MUTEX (userspace_mutex);
+static int cpus_using_userspace_governor;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_GOVERNOR, "userspace", msg)
{
struct cpufreq_freqs *freq = data;
- dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n", freq->cpu, freq->new);
+ if (!cpu_is_managed[freq->cpu])
+ return 0;
+
+ dprintk("saving cpu_cur_freq of cpu %u to be %u kHz\n",
+ freq->cpu, freq->new);
cpu_cur_freq[freq->cpu] = freq->new;
return 0;
static struct freq_attr freq_attr_scaling_setspeed =
{
- .attr = { .name = "scaling_setspeed", .mode = 0644, .owner = THIS_MODULE },
+ .attr = { .name = "scaling_setspeed", .mode = 0644 },
.show = show_speed,
.store = store_speed,
};
if (rc)
goto start_out;
+ if (cpus_using_userspace_governor == 0) {
+ cpufreq_register_notifier(
+ &userspace_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ }
+ cpus_using_userspace_governor++;
+
cpu_is_managed[cpu] = 1;
cpu_min_freq[cpu] = policy->min;
cpu_max_freq[cpu] = policy->max;
break;
case CPUFREQ_GOV_STOP:
mutex_lock(&userspace_mutex);
+ cpus_using_userspace_governor--;
+ if (cpus_using_userspace_governor == 0) {
+ cpufreq_unregister_notifier(
+ &userspace_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+ }
+
cpu_is_managed[cpu] = 0;
cpu_min_freq[cpu] = 0;
cpu_max_freq[cpu] = 0;
static int __init cpufreq_gov_userspace_init(void)
{
- cpufreq_register_notifier(&userspace_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
return cpufreq_register_governor(&cpufreq_gov_userspace);
}
static void __exit cpufreq_gov_userspace_exit(void)
{
cpufreq_unregister_governor(&cpufreq_gov_userspace);
- cpufreq_unregister_notifier(&userspace_cpufreq_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
}
struct freq_attr cpufreq_freq_attr_scaling_available_freqs = {
.attr = { .name = "scaling_available_frequencies",
.mode = 0444,
- .owner=THIS_MODULE
},
.show = show_available_freqs,
};
Say Y or M here to enable the driver for use by Dell systems
management software such as Dell OpenManage.
+config DMIID
+ bool "Export DMI identification via sysfs to userspace"
+ depends on DMI
+ default y
+ help
+ Say Y here if you want to query SMBIOS/DMI system identification
+ information from userspace through /sys/class/dmi/id/ or if you want
+ DMI-based module auto-loading.
+
endmenu
obj-$(CONFIG_EFI_PCDP) += pcdp.o
obj-$(CONFIG_DELL_RBU) += dell_rbu.o
obj-$(CONFIG_DCDBAS) += dcdbas.o
+obj-$(CONFIG_DMIID) += dmi-id.o
return count;
}
-static ssize_t smi_data_read(struct kobject *kobj, char *buf, loff_t pos,
- size_t count)
+static ssize_t smi_data_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t count)
{
size_t max_read;
ssize_t ret;
return ret;
}
-static ssize_t smi_data_write(struct kobject *kobj, char *buf, loff_t pos,
- size_t count)
+static ssize_t smi_data_write(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t count)
{
ssize_t ret;
#define DCDBAS_BIN_ATTR_RW(_name) \
struct bin_attribute bin_attr_##_name = { \
.attr = { .name = __stringify(_name), \
- .mode = 0600, \
- .owner = THIS_MODULE }, \
+ .mode = 0600 }, \
.read = _name##_read, \
.write = _name##_write, \
}
return ret_count;
}
-static ssize_t read_rbu_data(struct kobject *kobj, char *buffer,
- loff_t pos, size_t count)
+static ssize_t read_rbu_data(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buffer, loff_t pos, size_t count)
{
ssize_t ret_count = 0;
spin_unlock(&rbu_data.lock);
}
-static ssize_t read_rbu_image_type(struct kobject *kobj, char *buffer,
- loff_t pos, size_t count)
+static ssize_t read_rbu_image_type(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buffer, loff_t pos, size_t count)
{
int size = 0;
if (!pos)
return size;
}
-static ssize_t write_rbu_image_type(struct kobject *kobj, char *buffer,
- loff_t pos, size_t count)
+static ssize_t write_rbu_image_type(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buffer, loff_t pos, size_t count)
{
int rc = count;
int req_firm_rc = 0;
return rc;
}
-static ssize_t read_rbu_packet_size(struct kobject *kobj, char *buffer,
- loff_t pos, size_t count)
+static ssize_t read_rbu_packet_size(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buffer, loff_t pos, size_t count)
{
int size = 0;
if (!pos) {
return size;
}
-static ssize_t write_rbu_packet_size(struct kobject *kobj, char *buffer,
- loff_t pos, size_t count)
+static ssize_t write_rbu_packet_size(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buffer, loff_t pos, size_t count)
{
unsigned long temp;
spin_lock(&rbu_data.lock);
}
static struct bin_attribute rbu_data_attr = {
- .attr = {.name = "data",.owner = THIS_MODULE,.mode = 0444},
+ .attr = {.name = "data", .mode = 0444},
.read = read_rbu_data,
};
static struct bin_attribute rbu_image_type_attr = {
- .attr = {.name = "image_type",.owner = THIS_MODULE,.mode = 0644},
+ .attr = {.name = "image_type", .mode = 0644},
.read = read_rbu_image_type,
.write = write_rbu_image_type,
};
static struct bin_attribute rbu_packet_size_attr = {
- .attr = {.name = "packet_size",.owner = THIS_MODULE,.mode = 0644},
+ .attr = {.name = "packet_size", .mode = 0644},
.read = read_rbu_packet_size,
.write = write_rbu_packet_size,
};
--- /dev/null
+/*
+ * Export SMBIOS/DMI info via sysfs to userspace
+ *
+ * Copyright 2007, Lennart Poettering
+ *
+ * Licensed under GPLv2
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/device.h>
+#include <linux/autoconf.h>
+
+#define DEFINE_DMI_ATTR(_name, _mode, _show) \
+static struct device_attribute sys_dmi_##_name##_attr = \
+ __ATTR(_name, _mode, _show, NULL);
+
+#define DEFINE_DMI_ATTR_WITH_SHOW(_name, _mode, _field) \
+static ssize_t sys_dmi_##_name##_show(struct device *dev, \
+ struct device_attribute *attr, \
+ char *page) \
+{ \
+ ssize_t len; \
+ len = scnprintf(page, PAGE_SIZE, "%s\n", dmi_get_system_info(_field)); \
+ page[len-1] = '\n'; \
+ return len; \
+} \
+DEFINE_DMI_ATTR(_name, _mode, sys_dmi_##_name##_show);
+
+DEFINE_DMI_ATTR_WITH_SHOW(bios_vendor, 0444, DMI_BIOS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_version, 0444, DMI_BIOS_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(bios_date, 0444, DMI_BIOS_DATE);
+DEFINE_DMI_ATTR_WITH_SHOW(sys_vendor, 0444, DMI_SYS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(product_name, 0444, DMI_PRODUCT_NAME);
+DEFINE_DMI_ATTR_WITH_SHOW(product_version, 0444, DMI_PRODUCT_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(product_serial, 0400, DMI_PRODUCT_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(product_uuid, 0400, DMI_PRODUCT_UUID);
+DEFINE_DMI_ATTR_WITH_SHOW(board_vendor, 0444, DMI_BOARD_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(board_name, 0444, DMI_BOARD_NAME);
+DEFINE_DMI_ATTR_WITH_SHOW(board_version, 0444, DMI_BOARD_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(board_serial, 0400, DMI_BOARD_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(board_asset_tag, 0444, DMI_BOARD_ASSET_TAG);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_vendor, 0444, DMI_CHASSIS_VENDOR);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_type, 0444, DMI_CHASSIS_TYPE);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_version, 0444, DMI_CHASSIS_VERSION);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_serial, 0400, DMI_CHASSIS_SERIAL);
+DEFINE_DMI_ATTR_WITH_SHOW(chassis_asset_tag, 0444, DMI_CHASSIS_ASSET_TAG);
+
+static void ascii_filter(char *d, const char *s)
+{
+ /* Filter out characters we don't want to see in the modalias string */
+ for (; *s; s++)
+ if (*s > ' ' && *s < 127 && *s != ':')
+ *(d++) = *s;
+
+ *d = 0;
+}
+
+static ssize_t get_modalias(char *buffer, size_t buffer_size)
+{
+ static const struct mafield {
+ const char *prefix;
+ int field;
+ } fields[] = {
+ { "bvn", DMI_BIOS_VENDOR },
+ { "bvr", DMI_BIOS_VERSION },
+ { "bd", DMI_BIOS_DATE },
+ { "svn", DMI_SYS_VENDOR },
+ { "pn", DMI_PRODUCT_NAME },
+ { "pvr", DMI_PRODUCT_VERSION },
+ { "rvn", DMI_BOARD_VENDOR },
+ { "rn", DMI_BOARD_NAME },
+ { "rvr", DMI_BOARD_VERSION },
+ { "cvn", DMI_CHASSIS_VENDOR },
+ { "ct", DMI_CHASSIS_TYPE },
+ { "cvr", DMI_CHASSIS_VERSION },
+ { NULL, DMI_NONE }
+ };
+
+ ssize_t l, left;
+ char *p;
+ const struct mafield *f;
+
+ strcpy(buffer, "dmi");
+ p = buffer + 3; left = buffer_size - 4;
+
+ for (f = fields; f->prefix && left > 0; f++) {
+ const char *c;
+ char *t;
+
+ c = dmi_get_system_info(f->field);
+ if (!c)
+ continue;
+
+ t = kmalloc(strlen(c) + 1, GFP_KERNEL);
+ if (!t)
+ break;
+ ascii_filter(t, c);
+ l = scnprintf(p, left, ":%s%s", f->prefix, t);
+ kfree(t);
+
+ p += l;
+ left -= l;
+ }
+
+ p[0] = ':';
+ p[1] = 0;
+
+ return p - buffer + 1;
+}
+
+static ssize_t sys_dmi_modalias_show(struct device *dev,
+ struct device_attribute *attr, char *page)
+{
+ ssize_t r;
+ r = get_modalias(page, PAGE_SIZE-1);
+ page[r] = '\n';
+ page[r+1] = 0;
+ return r+1;
+}
+
+DEFINE_DMI_ATTR(modalias, 0444, sys_dmi_modalias_show);
+
+static struct attribute *sys_dmi_attributes[DMI_STRING_MAX+2];
+
+static struct attribute_group sys_dmi_attribute_group = {
+ .attrs = sys_dmi_attributes,
+};
+
+static struct attribute_group* sys_dmi_attribute_groups[] = {
+ &sys_dmi_attribute_group,
+ NULL
+};
+
+static int dmi_dev_uevent(struct device *dev, char **envp,
+ int num_envp, char *buffer, int buffer_size)
+{
+ strcpy(buffer, "MODALIAS=");
+ get_modalias(buffer+9, buffer_size-9);
+ envp[0] = buffer;
+ envp[1] = NULL;
+
+ return 0;
+}
+
+static struct class dmi_class = {
+ .name = "dmi",
+ .dev_release = (void(*)(struct device *)) kfree,
+ .dev_uevent = dmi_dev_uevent,
+};
+
+static struct device *dmi_dev;
+
+/* Initialization */
+
+#define ADD_DMI_ATTR(_name, _field) \
+ if (dmi_get_system_info(_field)) \
+ sys_dmi_attributes[i++] = & sys_dmi_##_name##_attr.attr;
+
+extern int dmi_available;
+
+static int __init dmi_id_init(void)
+{
+ int ret, i;
+
+ if (!dmi_available)
+ return -ENODEV;
+
+ /* Not necessarily all DMI fields are available on all
+ * systems, hence let's built an attribute table of just
+ * what's available */
+ i = 0;
+ ADD_DMI_ATTR(bios_vendor, DMI_BIOS_VENDOR);
+ ADD_DMI_ATTR(bios_version, DMI_BIOS_VERSION);
+ ADD_DMI_ATTR(bios_date, DMI_BIOS_DATE);
+ ADD_DMI_ATTR(sys_vendor, DMI_SYS_VENDOR);
+ ADD_DMI_ATTR(product_name, DMI_PRODUCT_NAME);
+ ADD_DMI_ATTR(product_version, DMI_PRODUCT_VERSION);
+ ADD_DMI_ATTR(product_serial, DMI_PRODUCT_SERIAL);
+ ADD_DMI_ATTR(product_uuid, DMI_PRODUCT_UUID);
+ ADD_DMI_ATTR(board_vendor, DMI_BOARD_VENDOR);
+ ADD_DMI_ATTR(board_name, DMI_BOARD_NAME);
+ ADD_DMI_ATTR(board_version, DMI_BOARD_VERSION);
+ ADD_DMI_ATTR(board_serial, DMI_BOARD_SERIAL);
+ ADD_DMI_ATTR(board_asset_tag, DMI_BOARD_ASSET_TAG);
+ ADD_DMI_ATTR(chassis_vendor, DMI_CHASSIS_VENDOR);
+ ADD_DMI_ATTR(chassis_type, DMI_CHASSIS_TYPE);
+ ADD_DMI_ATTR(chassis_version, DMI_CHASSIS_VERSION);
+ ADD_DMI_ATTR(chassis_serial, DMI_CHASSIS_SERIAL);
+ ADD_DMI_ATTR(chassis_asset_tag, DMI_CHASSIS_ASSET_TAG);
+ sys_dmi_attributes[i++] = &sys_dmi_modalias_attr.attr;
+
+ ret = class_register(&dmi_class);
+ if (ret)
+ return ret;
+
+ dmi_dev = kzalloc(sizeof(*dmi_dev), GFP_KERNEL);
+ if (!dmi_dev) {
+ ret = -ENOMEM;
+ goto fail_class_unregister;
+ }
+
+ dmi_dev->class = &dmi_class;
+ strcpy(dmi_dev->bus_id, "id");
+ dmi_dev->groups = sys_dmi_attribute_groups;
+
+ ret = device_register(dmi_dev);
+ if (ret)
+ goto fail_class_unregister;
+
+ return 0;
+
+fail_class_unregister:
+
+ class_unregister(&dmi_class);
+
+ return ret;
+}
+
+arch_initcall(dmi_id_init);
static char *dmi_ident[DMI_STRING_MAX];
static LIST_HEAD(dmi_devices);
+int dmi_available;
/*
* Save a DMI string
dmi_ident[slot] = p;
}
+static void __init dmi_save_uuid(struct dmi_header *dm, int slot, int index)
+{
+ u8 *d = (u8*) dm + index;
+ char *s;
+ int is_ff = 1, is_00 = 1, i;
+
+ if (dmi_ident[slot])
+ return;
+
+ for (i = 0; i < 16 && (is_ff || is_00); i++) {
+ if(d[i] != 0x00) is_ff = 0;
+ if(d[i] != 0xFF) is_00 = 0;
+ }
+
+ if (is_ff || is_00)
+ return;
+
+ s = dmi_alloc(16*2+4+1);
+ if (!s)
+ return;
+
+ sprintf(s,
+ "%02X%02X%02X%02X-%02X%02X-%02X%02X-%02X%02X-%02X%02X%02X%02X%02X%02X",
+ d[0], d[1], d[2], d[3], d[4], d[5], d[6], d[7],
+ d[8], d[9], d[10], d[11], d[12], d[13], d[14], d[15]);
+
+ dmi_ident[slot] = s;
+}
+
+static void __init dmi_save_type(struct dmi_header *dm, int slot, int index)
+{
+ u8 *d = (u8*) dm + index;
+ char *s;
+
+ if (dmi_ident[slot])
+ return;
+
+ s = dmi_alloc(4);
+ if (!s)
+ return;
+
+ sprintf(s, "%u", *d & 0x7F);
+ dmi_ident[slot] = s;
+}
+
static void __init dmi_save_devices(struct dmi_header *dm)
{
int i, count = (dm->length - sizeof(struct dmi_header)) / 2;
dmi_save_ident(dm, DMI_PRODUCT_NAME, 5);
dmi_save_ident(dm, DMI_PRODUCT_VERSION, 6);
dmi_save_ident(dm, DMI_PRODUCT_SERIAL, 7);
+ dmi_save_uuid(dm, DMI_PRODUCT_UUID, 8);
break;
case 2: /* Base Board Information */
dmi_save_ident(dm, DMI_BOARD_VENDOR, 4);
dmi_save_ident(dm, DMI_BOARD_NAME, 5);
dmi_save_ident(dm, DMI_BOARD_VERSION, 6);
+ dmi_save_ident(dm, DMI_BOARD_SERIAL, 7);
+ dmi_save_ident(dm, DMI_BOARD_ASSET_TAG, 8);
+ break;
+ case 3: /* Chassis Information */
+ dmi_save_ident(dm, DMI_CHASSIS_VENDOR, 4);
+ dmi_save_type(dm, DMI_CHASSIS_TYPE, 5);
+ dmi_save_ident(dm, DMI_CHASSIS_VERSION, 6);
+ dmi_save_ident(dm, DMI_CHASSIS_SERIAL, 7);
+ dmi_save_ident(dm, DMI_CHASSIS_ASSET_TAG, 8);
break;
case 10: /* Onboard Devices Information */
dmi_save_devices(dm);
if (efi.smbios == EFI_INVALID_TABLE_ADDR)
goto out;
- /* This is called as a core_initcall() because it isn't
- * needed during early boot. This also means we can
- * iounmap the space when we're done with it.
- */
+ /* This is called as a core_initcall() because it isn't
+ * needed during early boot. This also means we can
+ * iounmap the space when we're done with it.
+ */
p = dmi_ioremap(efi.smbios, 32);
if (p == NULL)
goto out;
rc = dmi_present(p + 0x10); /* offset of _DMI_ string */
dmi_iounmap(p, 32);
- if (!rc)
+ if (!rc) {
+ dmi_available = 1;
return;
+ }
}
else {
/*
for (q = p; q < p + 0x10000; q += 16) {
rc = dmi_present(q);
- if (!rc)
+ if (!rc) {
+ dmi_available = 1;
return;
+ }
}
}
out: printk(KERN_INFO "DMI not present or invalid.\n");
return year;
}
+
#define EDD_DEVICE_ATTR(_name,_mode,_show,_test) \
struct edd_attribute edd_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE }, \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.test = _test, \
};
#define EFI_ATTR(_name, _mode, _show, _store) \
struct subsys_attribute efi_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
#define EFIVAR_ATTR(_name, _mode, _show, _store) \
struct efivar_attribute efivar_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
#define VAR_SUBSYS_ATTR(_name, _mode, _show, _store) \
struct subsys_attribute var_subsys_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
This support is also available as a module. If so, the module
will be called i2c-algo-pca.
-config I2C_ALGO8XX
- tristate "MPC8xx CPM I2C interface"
- depends on 8xx
-
config I2C_ALGO_SGI
tristate "I2C SGI interfaces"
depends on SGI_IP22 || SGI_IP32 || X86_VISWS
ATI IXP300
ATI IXP400
ATI SB600
+ ATI SB700
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
This support is also available as a module. If so, the module
will be called i2c-prosavage.
-config I2C_RPXLITE
- tristate "Embedded Planet RPX Lite/Classic support"
- depends on RPXLITE || RPXCLASSIC
- select I2C_ALGO8XX
-
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
depends on ARCH_S3C2410
This driver can also be built as a module. If so, the module
will be called i2c-sis96x.
+config I2C_TAOS_EVM
+ tristate "TAOS evaluation module"
+ depends on EXPERIMENTAL
+ select SERIO
+ select SERIO_SERPORT
+ default n
+ help
+ This supports TAOS evaluation modules on serial port. In order to
+ use this driver, you will need the inputattach tool, which is part
+ of the input-utils package.
+
+ If unsure, say N.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-taos-evm.
+
config I2C_STUB
tristate "I2C/SMBus Test Stub"
depends on EXPERIMENTAL && m
This driver can also be built as a module. If so, the module
will be called i2c-pnx.
+config I2C_PMCMSP
+ tristate "PMC MSP I2C TWI Controller"
+ depends on PMC_MSP
+ help
+ This driver supports the PMC TWI controller on MSP devices.
+
+ This driver can also be built as module. If so, the module
+ will be called i2c-pmcmsp.
+
endmenu
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
-obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
+obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
gpio_set_value(pdata->scl_pin, state);
}
-int i2c_gpio_getsda(void *data)
+static int i2c_gpio_getsda(void *data)
{
struct i2c_gpio_platform_data *pdata = data;
return gpio_get_value(pdata->sda_pin);
}
-int i2c_gpio_getscl(void *data)
+static int i2c_gpio_getscl(void *data)
{
struct i2c_gpio_platform_data *pdata = data;
adap->algo_data = bit_data;
adap->dev.parent = &pdev->dev;
- ret = i2c_bit_add_bus(adap);
+ /*
+ * If "dev->id" is negative we consider it as zero.
+ * The reason to do so is to avoid sysfs names that only make
+ * sense when there are multiple adapters.
+ */
+ adap->nr = pdev->id >= 0 ? pdev->id : 0;
+ ret = i2c_bit_add_numbered_bus(adap);
if (ret)
goto err_add_bus;
/*
SUPPORTED DEVICES PCI ID
- 82801AA 2413
- 82801AB 2423
- 82801BA 2443
- 82801CA/CAM 2483
- 82801DB 24C3 (HW PEC supported, 32 byte buffer not supported)
- 82801EB 24D3 (HW PEC supported, 32 byte buffer not supported)
+ 82801AA 2413
+ 82801AB 2423
+ 82801BA 2443
+ 82801CA/CAM 2483
+ 82801DB 24C3 (HW PEC supported)
+ 82801EB 24D3 (HW PEC supported)
6300ESB 25A4
ICH6 266A
ICH7 27DA
#define SMBHSTCFG_SMB_SMI_EN 2
#define SMBHSTCFG_I2C_EN 4
+/* Auxillary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC 1
+#define SMBAUXCTL_E32B 2
+
+/* kill bit for SMBHSTCNT */
+#define SMBHSTCNT_KILL 2
+
/* Other settings */
#define MAX_TIMEOUT 100
#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
#define I801_START 0x40
#define I801_PEC_EN 0x80 /* ICH4 only */
-
-static int i801_transaction(void);
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command, int hwpec);
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE 0x80
+#define SMBHSTSTS_INUSE_STS 0x40
+#define SMBHSTSTS_SMBALERT_STS 0x20
+#define SMBHSTSTS_FAILED 0x10
+#define SMBHSTSTS_BUS_ERR 0x08
+#define SMBHSTSTS_DEV_ERR 0x04
+#define SMBHSTSTS_INTR 0x02
+#define SMBHSTSTS_HOST_BUSY 0x01
static unsigned long i801_smba;
static unsigned char i801_original_hstcfg;
static struct pci_dev *I801_dev;
static int isich4;
-static int i801_transaction(void)
+static int i801_transaction(int xact)
{
int temp;
int result = 0;
}
}
- outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * INTREN, SMBSCMD are passed in xact */
+ outb_p(xact | I801_START, SMBHSTCNT);
/* We will always wait for a fraction of a second! */
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
- } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+ } while ((temp & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
result = -1;
+ /* try to stop the current command */
+ dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
+ outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
+ msleep(1);
+ outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
}
- if (temp & 0x10) {
+ if (temp & SMBHSTSTS_FAILED) {
result = -1;
dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
}
- if (temp & 0x08) {
+ if (temp & SMBHSTSTS_BUS_ERR) {
result = -1;
dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
"until next hard reset. (sorry!)\n");
/* Clock stops and slave is stuck in mid-transmission */
}
- if (temp & 0x04) {
+ if (temp & SMBHSTSTS_DEV_ERR) {
result = -1;
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
return result;
}
-/* All-inclusive block transaction function */
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command, int hwpec)
+/* wait for INTR bit as advised by Intel */
+static void i801_wait_hwpec(void)
+{
+ int timeout = 0;
+ int temp;
+
+ do {
+ msleep(1);
+ temp = inb_p(SMBHSTSTS);
+ } while ((!(temp & SMBHSTSTS_INTR))
+ && (timeout++ < MAX_TIMEOUT));
+
+ if (timeout >= MAX_TIMEOUT) {
+ dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+ }
+ outb_p(temp, SMBHSTSTS);
+}
+
+static int i801_block_transaction_by_block(union i2c_smbus_data *data,
+ char read_write, int hwpec)
+{
+ int i, len;
+
+ inb_p(SMBHSTCNT); /* reset the data buffer index */
+
+ /* Use 32-byte buffer to process this transaction */
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ outb_p(len, SMBHSTDAT0);
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i+1], SMBBLKDAT);
+ }
+
+ if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+ I801_PEC_EN * hwpec))
+ return -1;
+
+ if (read_write == I2C_SMBUS_READ) {
+ len = inb_p(SMBHSTDAT0);
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -1;
+
+ data->block[0] = len;
+ for (i = 0; i < len; i++)
+ data->block[i + 1] = inb_p(SMBBLKDAT);
+ }
+ return 0;
+}
+
+static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
+ char read_write, int hwpec)
{
int i, len;
int smbcmd;
int temp;
int result = 0;
int timeout;
- unsigned char hostc, errmask;
+ unsigned char errmask;
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (read_write == I2C_SMBUS_WRITE) {
- /* set I2C_EN bit in configuration register */
- pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
- pci_write_config_byte(I801_dev, SMBHSTCFG,
- hostc | SMBHSTCFG_I2C_EN);
- } else {
- dev_err(&I801_dev->dev,
- "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
- return -1;
- }
- }
+ len = data->block[0];
if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 1)
- len = 1;
- if (len > 32)
- len = 32;
outb_p(len, SMBHSTDAT0);
outb_p(data->block[1], SMBBLKDAT);
- } else {
- len = 32; /* max for reads */
- }
-
- if(isich4 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
- /* set 32 byte buffer */
}
for (i = 1; i <= len; i++) {
/* Make sure the SMBus host is ready to start transmitting */
temp = inb_p(SMBHSTSTS);
if (i == 1) {
- /* Erronenous conditions before transaction:
+ /* Erronenous conditions before transaction:
* Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- errmask=0x9f;
+ errmask = 0x9f;
} else {
- /* Erronenous conditions during transaction:
+ /* Erronenous conditions during transaction:
* Failed, Bus_Err, Dev_Err, Intr */
- errmask=0x1e;
+ errmask = 0x1e;
}
if (temp & errmask) {
dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
dev_err(&I801_dev->dev,
"Reset failed! (%02x)\n", temp);
- result = -1;
- goto END;
+ return -1;
}
- if (i != 1) {
+ if (i != 1)
/* if die in middle of block transaction, fail */
- result = -1;
- goto END;
- }
+ return -1;
}
if (i == 1)
msleep(1);
temp = inb_p(SMBHSTSTS);
}
- while ((!(temp & 0x80))
- && (timeout++ < MAX_TIMEOUT));
+ while ((!(temp & SMBHSTSTS_BYTE_DONE))
+ && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
+ /* try to stop the current command */
+ dev_dbg(&I801_dev->dev, "Terminating the current "
+ "operation\n");
+ outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
+ msleep(1);
+ outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL),
+ SMBHSTCNT);
result = -1;
dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
}
- if (temp & 0x10) {
+ if (temp & SMBHSTSTS_FAILED) {
result = -1;
dev_dbg(&I801_dev->dev,
"Error: Failed bus transaction\n");
- } else if (temp & 0x08) {
+ } else if (temp & SMBHSTSTS_BUS_ERR) {
result = -1;
dev_err(&I801_dev->dev, "Bus collision!\n");
- } else if (temp & 0x04) {
+ } else if (temp & SMBHSTSTS_DEV_ERR) {
result = -1;
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
if (i == 1 && read_write == I2C_SMBUS_READ) {
len = inb_p(SMBHSTDAT0);
- if (len < 1)
- len = 1;
- if (len > 32)
- len = 32;
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -1;
data->block[0] = len;
}
inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
if (result < 0)
- goto END;
+ return result;
}
+ return result;
+}
- if (hwpec) {
- /* wait for INTR bit as advised by Intel */
- timeout = 0;
- do {
- msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((!(temp & 0x02))
- && (timeout++ < MAX_TIMEOUT));
+static int i801_set_block_buffer_mode(void)
+{
+ outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
+ if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
+ return -1;
+ return 0;
+}
- if (timeout >= MAX_TIMEOUT) {
- dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+/* Block transaction function */
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+ int command, int hwpec)
+{
+ int result = 0;
+ unsigned char hostc;
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
+ pci_write_config_byte(I801_dev, SMBHSTCFG,
+ hostc | SMBHSTCFG_I2C_EN);
+ } else {
+ dev_err(&I801_dev->dev,
+ "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
+ return -1;
}
- outb_p(temp, SMBHSTSTS);
}
- result = 0;
-END:
+
+ if (read_write == I2C_SMBUS_WRITE) {
+ if (data->block[0] < 1)
+ data->block[0] = 1;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ } else {
+ data->block[0] = 32; /* max for reads */
+ }
+
+ if (isich4 && i801_set_block_buffer_mode() == 0 )
+ result = i801_block_transaction_by_block(data, read_write,
+ hwpec);
+ else
+ result = i801_block_transaction_byte_by_byte(data, read_write,
+ hwpec);
+
+ if (result == 0 && hwpec)
+ i801_wait_hwpec();
+
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
/* restore saved configuration register value */
pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
return -1;
}
- outb_p(hwpec, SMBAUXCTL); /* enable/disable hardware PEC */
+ if (hwpec) /* enable/disable hardware PEC */
+ outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL);
+ else
+ outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
if(block)
ret = i801_block_transaction(data, read_write, size, hwpec);
- else {
- outb_p(xact | ENABLE_INT9, SMBHSTCNT);
- ret = i801_transaction();
- }
+ else
+ ret = i801_transaction(xact | ENABLE_INT9);
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
- time, so we forcibly disable it after every transaction. */
+ time, so we forcibly disable it after every transaction. Turn off
+ E32B for the same reason. */
if (hwpec)
- outb_p(0, SMBAUXCTL);
+ outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
+ SMBAUXCTL);
if(block)
return ret;
new_adapter->id = I2C_HW_IOP3XX;
new_adapter->owner = THIS_MODULE;
new_adapter->dev.parent = &pdev->dev;
+ new_adapter->nr = pdev->id;
/*
* Default values...should these come in from board code?
platform_set_drvdata(pdev, new_adapter);
new_adapter->algo_data = adapter_data;
- i2c_add_adapter(new_adapter);
+ i2c_add_numbered_adapter(new_adapter);
return 0;
return IRQ_HANDLED;
}
+/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
+ * the bus, because it wants to send ACK.
+ * Following sequence of enabling/disabling and sending start/stop generates
+ * the pulse, so it's all OK.
+ */
+static void mpc_i2c_fixup(struct mpc_i2c *i2c)
+{
+ writeccr(i2c, 0);
+ udelay(30);
+ writeccr(i2c, CCR_MEN);
+ udelay(30);
+ writeccr(i2c, CCR_MSTA | CCR_MTX);
+ udelay(30);
+ writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+ udelay(30);
+ writeccr(i2c, CCR_MEN);
+ udelay(30);
+}
+
static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
{
unsigned long orig_jiffies = jiffies;
static void mpc_i2c_stop(struct mpc_i2c *i2c)
{
writeccr(i2c, CCR_MEN);
+ writeccr(i2c, 0);
}
static int mpc_write(struct mpc_i2c *i2c, int target,
}
if (time_after(jiffies, orig_jiffies + HZ)) {
pr_debug("I2C: timeout\n");
+ if (readb(i2c->base + MPC_I2C_SR) ==
+ (CSR_MCF | CSR_MBB | CSR_RXAK))
+ mpc_i2c_fixup(i2c);
return -EIO;
}
schedule();
platform_set_drvdata(pdev, i2c);
i2c->adap = mpc_ops;
+ i2c->adap.nr = pdev->id;
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &pdev->dev;
- if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
+ if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) {
printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
goto fail_add;
}
drv_data->adapter.class = I2C_CLASS_HWMON;
drv_data->adapter.timeout = pdata->timeout;
drv_data->adapter.retries = pdata->retries;
+ drv_data->adapter.nr = pd->id;
platform_set_drvdata(pd, drv_data);
i2c_set_adapdata(&drv_data->adapter, drv_data);
drv_data->irq);
rc = -EINVAL;
goto exit_unmap_regs;
- } else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) {
+ } else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
dev_err(&drv_data->adapter.dev,
"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
goto exit_free_irq;
struct i2c_adapter adapter;
int base;
int size;
+ int blockops;
};
#define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */
#define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */
#define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */
+#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data
+ bytes */
#define NVIDIA_SMB_STS_DONE 0x80
#define NVIDIA_SMB_STS_ALRM 0x40
#define NVIDIA_SMB_PRTCL_BYTE 0x04
#define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06
#define NVIDIA_SMB_PRTCL_WORD_DATA 0x08
+#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a
#define NVIDIA_SMB_PRTCL_PEC 0x80
static struct pci_driver nforce2_driver;
{
struct nforce2_smbus *smbus = adap->algo_data;
unsigned char protocol, pec, temp;
+ u8 len;
+ int i;
protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
NVIDIA_SMB_PRTCL_WRITE;
protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
break;
+ case I2C_SMBUS_BLOCK_DATA:
+ outb_p(command, NVIDIA_SMB_CMD);
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX)) {
+ dev_err(&adap->dev,
+ "Transaction failed "
+ "(requested block size: %d)\n",
+ len);
+ return -1;
+ }
+ outb_p(len, NVIDIA_SMB_BCNT);
+ for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
+ outb_p(data->block[i + 1],
+ NVIDIA_SMB_DATA+i);
+ }
+ protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
+ break;
+
default:
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
case I2C_SMBUS_WORD_DATA:
data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
break;
+
+ case I2C_SMBUS_BLOCK_DATA:
+ len = inb_p(NVIDIA_SMB_BCNT);
+ len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
+ for (i = 0; i < len; i++)
+ data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
+ data->block[0] = len;
+ break;
}
return 0;
{
/* other functionality might be possible, but is not tested */
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ (((struct nforce2_smbus*)adapter->algo_data)->blockops ?
+ I2C_FUNC_SMBUS_BLOCK_DATA : 0);
}
static struct i2c_algorithm smbus_algorithm = {
return -ENOMEM;
pci_set_drvdata(dev, smbuses);
+ switch(dev->device) {
+ case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS:
+ case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS:
+ smbuses[0].blockops = 1;
+ smbuses[1].blockops = 1;
+ }
+
/* SMBus adapter 1 */
res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
if (res1 < 0) {
Supports:
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000
- ATI IXP200, IXP300, IXP400, SB600
+ ATI IXP200, IXP300, IXP400, SB600, SB700
SMSC Victory66
Note: we assume there can only be one device, with one SMBus interface.
.driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SMBUS),
.driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SMBUS),
+ .driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
.driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),
--- /dev/null
+/*
+ * Specific bus support for PMC-TWI compliant implementation on MSP71xx.
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#define DRV_NAME "pmcmsptwi"
+
+#define MSP_TWI_SF_CLK_REG_OFFSET 0x00
+#define MSP_TWI_HS_CLK_REG_OFFSET 0x04
+#define MSP_TWI_CFG_REG_OFFSET 0x08
+#define MSP_TWI_CMD_REG_OFFSET 0x0c
+#define MSP_TWI_ADD_REG_OFFSET 0x10
+#define MSP_TWI_DAT_0_REG_OFFSET 0x14
+#define MSP_TWI_DAT_1_REG_OFFSET 0x18
+#define MSP_TWI_INT_STS_REG_OFFSET 0x1c
+#define MSP_TWI_INT_MSK_REG_OFFSET 0x20
+#define MSP_TWI_BUSY_REG_OFFSET 0x24
+
+#define MSP_TWI_INT_STS_DONE (1 << 0)
+#define MSP_TWI_INT_STS_LOST_ARBITRATION (1 << 1)
+#define MSP_TWI_INT_STS_NO_RESPONSE (1 << 2)
+#define MSP_TWI_INT_STS_DATA_COLLISION (1 << 3)
+#define MSP_TWI_INT_STS_BUSY (1 << 4)
+#define MSP_TWI_INT_STS_ALL 0x1f
+
+#define MSP_MAX_BYTES_PER_RW 8
+#define MSP_MAX_POLL 5
+#define MSP_POLL_DELAY 10
+#define MSP_IRQ_TIMEOUT (MSP_MAX_POLL * MSP_POLL_DELAY)
+
+/* IO Operation macros */
+#define pmcmsptwi_readl __raw_readl
+#define pmcmsptwi_writel __raw_writel
+
+/* TWI command type */
+enum pmcmsptwi_cmd_type {
+ MSP_TWI_CMD_WRITE = 0, /* Write only */
+ MSP_TWI_CMD_READ = 1, /* Read only */
+ MSP_TWI_CMD_WRITE_READ = 2, /* Write then Read */
+};
+
+/* The possible results of the xferCmd */
+enum pmcmsptwi_xfer_result {
+ MSP_TWI_XFER_OK = 0,
+ MSP_TWI_XFER_TIMEOUT,
+ MSP_TWI_XFER_BUSY,
+ MSP_TWI_XFER_DATA_COLLISION,
+ MSP_TWI_XFER_NO_RESPONSE,
+ MSP_TWI_XFER_LOST_ARBITRATION,
+};
+
+/* Corresponds to a PMCTWI clock configuration register */
+struct pmcmsptwi_clock {
+ u8 filter; /* Bits 15:12, default = 0x03 */
+ u16 clock; /* Bits 9:0, default = 0x001f */
+};
+
+struct pmcmsptwi_clockcfg {
+ struct pmcmsptwi_clock standard; /* The standard/fast clock config */
+ struct pmcmsptwi_clock highspeed; /* The highspeed clock config */
+};
+
+/* Corresponds to the main TWI configuration register */
+struct pmcmsptwi_cfg {
+ u8 arbf; /* Bits 15:12, default=0x03 */
+ u8 nak; /* Bits 11:8, default=0x03 */
+ u8 add10; /* Bit 7, default=0x00 */
+ u8 mst_code; /* Bits 6:4, default=0x00 */
+ u8 arb; /* Bit 1, default=0x01 */
+ u8 highspeed; /* Bit 0, default=0x00 */
+};
+
+/* A single pmctwi command to issue */
+struct pmcmsptwi_cmd {
+ u16 addr; /* The slave address (7 or 10 bits) */
+ enum pmcmsptwi_cmd_type type; /* The command type */
+ u8 write_len; /* Number of bytes in the write buffer */
+ u8 read_len; /* Number of bytes in the read buffer */
+ u8 *write_data; /* Buffer of characters to send */
+ u8 *read_data; /* Buffer to fill with incoming data */
+};
+
+/* The private data */
+struct pmcmsptwi_data {
+ void __iomem *iobase; /* iomapped base for IO */
+ int irq; /* IRQ to use (0 disables) */
+ struct completion wait; /* Completion for xfer */
+ struct mutex lock; /* Used for threadsafeness */
+ enum pmcmsptwi_xfer_result last_result; /* result of last xfer */
+};
+
+/* The default settings */
+const static struct pmcmsptwi_clockcfg pmcmsptwi_defclockcfg = {
+ .standard = {
+ .filter = 0x3,
+ .clock = 0x1f,
+ },
+ .highspeed = {
+ .filter = 0x3,
+ .clock = 0x1f,
+ },
+};
+
+const static struct pmcmsptwi_cfg pmcmsptwi_defcfg = {
+ .arbf = 0x03,
+ .nak = 0x03,
+ .add10 = 0x00,
+ .mst_code = 0x00,
+ .arb = 0x01,
+ .highspeed = 0x00,
+};
+
+static struct pmcmsptwi_data pmcmsptwi_data;
+
+static struct i2c_adapter pmcmsptwi_adapter;
+
+/* inline helper functions */
+static inline u32 pmcmsptwi_clock_to_reg(
+ const struct pmcmsptwi_clock *clock)
+{
+ return ((clock->filter & 0xf) << 12) | (clock->clock & 0x03ff);
+}
+
+static inline void pmcmsptwi_reg_to_clock(
+ u32 reg, struct pmcmsptwi_clock *clock)
+{
+ clock->filter = (reg >> 12) & 0xf;
+ clock->clock = reg & 0x03ff;
+}
+
+static inline u32 pmcmsptwi_cfg_to_reg(const struct pmcmsptwi_cfg *cfg)
+{
+ return ((cfg->arbf & 0xf) << 12) |
+ ((cfg->nak & 0xf) << 8) |
+ ((cfg->add10 & 0x1) << 7) |
+ ((cfg->mst_code & 0x7) << 4) |
+ ((cfg->arb & 0x1) << 1) |
+ (cfg->highspeed & 0x1);
+}
+
+static inline void pmcmsptwi_reg_to_cfg(u32 reg, struct pmcmsptwi_cfg *cfg)
+{
+ cfg->arbf = (reg >> 12) & 0xf;
+ cfg->nak = (reg >> 8) & 0xf;
+ cfg->add10 = (reg >> 7) & 0x1;
+ cfg->mst_code = (reg >> 4) & 0x7;
+ cfg->arb = (reg >> 1) & 0x1;
+ cfg->highspeed = reg & 0x1;
+}
+
+/*
+ * Sets the current clock configuration
+ */
+static void pmcmsptwi_set_clock_config(const struct pmcmsptwi_clockcfg *cfg,
+ struct pmcmsptwi_data *data)
+{
+ mutex_lock(&data->lock);
+ pmcmsptwi_writel(pmcmsptwi_clock_to_reg(&cfg->standard),
+ data->iobase + MSP_TWI_SF_CLK_REG_OFFSET);
+ pmcmsptwi_writel(pmcmsptwi_clock_to_reg(&cfg->highspeed),
+ data->iobase + MSP_TWI_HS_CLK_REG_OFFSET);
+ mutex_unlock(&data->lock);
+}
+
+/*
+ * Gets the current TWI bus configuration
+ */
+static void pmcmsptwi_get_twi_config(struct pmcmsptwi_cfg *cfg,
+ struct pmcmsptwi_data *data)
+{
+ mutex_lock(&data->lock);
+ pmcmsptwi_reg_to_cfg(pmcmsptwi_readl(
+ data->iobase + MSP_TWI_CFG_REG_OFFSET), cfg);
+ mutex_unlock(&data->lock);
+}
+
+/*
+ * Sets the current TWI bus configuration
+ */
+static void pmcmsptwi_set_twi_config(const struct pmcmsptwi_cfg *cfg,
+ struct pmcmsptwi_data *data)
+{
+ mutex_lock(&data->lock);
+ pmcmsptwi_writel(pmcmsptwi_cfg_to_reg(cfg),
+ data->iobase + MSP_TWI_CFG_REG_OFFSET);
+ mutex_unlock(&data->lock);
+}
+
+/*
+ * Parses the 'int_sts' register and returns a well-defined error code
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_get_result(u32 reg)
+{
+ if (reg & MSP_TWI_INT_STS_LOST_ARBITRATION) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: Lost arbitration\n");
+ return MSP_TWI_XFER_LOST_ARBITRATION;
+ } else if (reg & MSP_TWI_INT_STS_NO_RESPONSE) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: No response\n");
+ return MSP_TWI_XFER_NO_RESPONSE;
+ } else if (reg & MSP_TWI_INT_STS_DATA_COLLISION) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: Data collision\n");
+ return MSP_TWI_XFER_DATA_COLLISION;
+ } else if (reg & MSP_TWI_INT_STS_BUSY) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: Bus busy\n");
+ return MSP_TWI_XFER_BUSY;
+ }
+
+ dev_dbg(&pmcmsptwi_adapter.dev, "Result: Operation succeeded\n");
+ return MSP_TWI_XFER_OK;
+}
+
+/*
+ * In interrupt mode, handle the interrupt.
+ * NOTE: Assumes data->lock is held.
+ */
+static irqreturn_t pmcmsptwi_interrupt(int irq, void *ptr)
+{
+ struct pmcmsptwi_data *data = ptr;
+
+ u32 reason = pmcmsptwi_readl(data->iobase +
+ MSP_TWI_INT_STS_REG_OFFSET);
+ pmcmsptwi_writel(reason, data->iobase + MSP_TWI_INT_STS_REG_OFFSET);
+
+ dev_dbg(&pmcmsptwi_adapter.dev, "Got interrupt 0x%08x\n", reason);
+ if (!(reason & MSP_TWI_INT_STS_DONE))
+ return IRQ_NONE;
+
+ data->last_result = pmcmsptwi_get_result(reason);
+ complete(&data->wait);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Probe for and register the device and return 0 if there is one.
+ */
+static int __devinit pmcmsptwi_probe(struct platform_device *pldev)
+{
+ struct resource *res;
+ int rc = -ENODEV;
+
+ /* get the static platform resources */
+ res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pldev->dev, "IOMEM resource not found\n");
+ goto ret_err;
+ }
+
+ /* reserve the memory region */
+ if (!request_mem_region(res->start, res->end - res->start + 1,
+ pldev->name)) {
+ dev_err(&pldev->dev,
+ "Unable to get memory/io address region 0x%08x\n",
+ res->start);
+ rc = -EBUSY;
+ goto ret_err;
+ }
+
+ /* remap the memory */
+ pmcmsptwi_data.iobase = ioremap_nocache(res->start,
+ res->end - res->start + 1);
+ if (!pmcmsptwi_data.iobase) {
+ dev_err(&pldev->dev,
+ "Unable to ioremap address 0x%08x\n", res->start);
+ rc = -EIO;
+ goto ret_unreserve;
+ }
+
+ /* request the irq */
+ pmcmsptwi_data.irq = platform_get_irq(pldev, 0);
+ if (pmcmsptwi_data.irq) {
+ rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt,
+ IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+ pldev->name, &pmcmsptwi_data);
+ if (rc == 0) {
+ /*
+ * Enable 'DONE' interrupt only.
+ *
+ * If you enable all interrupts, you will get one on
+ * error and another when the operation completes.
+ * This way you only have to handle one interrupt,
+ * but you can still check all result flags.
+ */
+ pmcmsptwi_writel(MSP_TWI_INT_STS_DONE,
+ pmcmsptwi_data.iobase +
+ MSP_TWI_INT_MSK_REG_OFFSET);
+ } else {
+ dev_warn(&pldev->dev,
+ "Could not assign TWI IRQ handler "
+ "to irq %d (continuing with poll)\n",
+ pmcmsptwi_data.irq);
+ pmcmsptwi_data.irq = 0;
+ }
+ }
+
+ init_completion(&pmcmsptwi_data.wait);
+ mutex_init(&pmcmsptwi_data.lock);
+
+ pmcmsptwi_set_clock_config(&pmcmsptwi_defclockcfg, &pmcmsptwi_data);
+ pmcmsptwi_set_twi_config(&pmcmsptwi_defcfg, &pmcmsptwi_data);
+
+ printk(KERN_INFO DRV_NAME ": Registering MSP71xx I2C adapter\n");
+
+ pmcmsptwi_adapter.dev.parent = &pldev->dev;
+ platform_set_drvdata(pldev, &pmcmsptwi_adapter);
+ i2c_set_adapdata(&pmcmsptwi_adapter, &pmcmsptwi_data);
+
+ rc = i2c_add_adapter(&pmcmsptwi_adapter);
+ if (rc) {
+ dev_err(&pldev->dev, "Unable to register I2C adapter\n");
+ goto ret_unmap;
+ }
+
+ return 0;
+
+ret_unmap:
+ platform_set_drvdata(pldev, NULL);
+ if (pmcmsptwi_data.irq) {
+ pmcmsptwi_writel(0,
+ pmcmsptwi_data.iobase + MSP_TWI_INT_MSK_REG_OFFSET);
+ free_irq(pmcmsptwi_data.irq, &pmcmsptwi_data);
+ }
+
+ iounmap(pmcmsptwi_data.iobase);
+
+ret_unreserve:
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ret_err:
+ return rc;
+}
+
+/*
+ * Release the device and return 0 if there is one.
+ */
+static int __devexit pmcmsptwi_remove(struct platform_device *pldev)
+{
+ struct resource *res;
+
+ i2c_del_adapter(&pmcmsptwi_adapter);
+
+ platform_set_drvdata(pldev, NULL);
+ if (pmcmsptwi_data.irq) {
+ pmcmsptwi_writel(0,
+ pmcmsptwi_data.iobase + MSP_TWI_INT_MSK_REG_OFFSET);
+ free_irq(pmcmsptwi_data.irq, &pmcmsptwi_data);
+ }
+
+ iounmap(pmcmsptwi_data.iobase);
+
+ res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ return 0;
+}
+
+/*
+ * Polls the 'busy' register until the command is complete.
+ * NOTE: Assumes data->lock is held.
+ */
+static void pmcmsptwi_poll_complete(struct pmcmsptwi_data *data)
+{
+ int i;
+
+ for (i = 0; i < MSP_MAX_POLL; i++) {
+ u32 val = pmcmsptwi_readl(data->iobase +
+ MSP_TWI_BUSY_REG_OFFSET);
+ if (val == 0) {
+ u32 reason = pmcmsptwi_readl(data->iobase +
+ MSP_TWI_INT_STS_REG_OFFSET);
+ pmcmsptwi_writel(reason, data->iobase +
+ MSP_TWI_INT_STS_REG_OFFSET);
+ data->last_result = pmcmsptwi_get_result(reason);
+ return;
+ }
+ udelay(MSP_POLL_DELAY);
+ }
+
+ dev_dbg(&pmcmsptwi_adapter.dev, "Result: Poll timeout\n");
+ data->last_result = MSP_TWI_XFER_TIMEOUT;
+}
+
+/*
+ * Do the transfer (low level):
+ * May use interrupt-driven or polling, depending on if an IRQ is
+ * presently registered.
+ * NOTE: Assumes data->lock is held.
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_do_xfer(
+ u32 reg, struct pmcmsptwi_data *data)
+{
+ dev_dbg(&pmcmsptwi_adapter.dev, "Writing cmd reg 0x%08x\n", reg);
+ pmcmsptwi_writel(reg, data->iobase + MSP_TWI_CMD_REG_OFFSET);
+ if (data->irq) {
+ unsigned long timeleft = wait_for_completion_timeout(
+ &data->wait, MSP_IRQ_TIMEOUT);
+ if (timeleft == 0) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: IRQ timeout\n");
+ complete(&data->wait);
+ data->last_result = MSP_TWI_XFER_TIMEOUT;
+ }
+ } else
+ pmcmsptwi_poll_complete(data);
+
+ return data->last_result;
+}
+
+/*
+ * Helper routine, converts 'pmctwi_cmd' struct to register format
+ */
+static inline u32 pmcmsptwi_cmd_to_reg(const struct pmcmsptwi_cmd *cmd)
+{
+ return ((cmd->type & 0x3) << 8) |
+ (((cmd->write_len - 1) & 0x7) << 4) |
+ ((cmd->read_len - 1) & 0x7);
+}
+
+/*
+ * Do the transfer (high level)
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
+ struct pmcmsptwi_cmd *cmd,
+ struct pmcmsptwi_data *data)
+{
+ enum pmcmsptwi_xfer_result retval;
+
+ if ((cmd->type == MSP_TWI_CMD_WRITE && cmd->write_len == 0) ||
+ (cmd->type == MSP_TWI_CMD_READ && cmd->read_len == 0) ||
+ (cmd->type == MSP_TWI_CMD_WRITE_READ &&
+ (cmd->read_len == 0 || cmd->write_len == 0))) {
+ dev_err(&pmcmsptwi_adapter.dev,
+ "%s: Cannot transfer less than 1 byte\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+
+ if (cmd->read_len > MSP_MAX_BYTES_PER_RW ||
+ cmd->write_len > MSP_MAX_BYTES_PER_RW) {
+ dev_err(&pmcmsptwi_adapter.dev,
+ "%s: Cannot transfer more than %d bytes\n",
+ __FUNCTION__, MSP_MAX_BYTES_PER_RW);
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->lock);
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Setting address to 0x%04x\n", cmd->addr);
+ pmcmsptwi_writel(cmd->addr, data->iobase + MSP_TWI_ADD_REG_OFFSET);
+
+ if (cmd->type == MSP_TWI_CMD_WRITE ||
+ cmd->type == MSP_TWI_CMD_WRITE_READ) {
+ __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
+ tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
+ dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
+ pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
+ data->iobase + MSP_TWI_DAT_0_REG_OFFSET);
+ if (cmd->write_len > 4)
+ pmcmsptwi_writel(tmp >> 32,
+ data->iobase + MSP_TWI_DAT_1_REG_OFFSET);
+ }
+
+ retval = pmcmsptwi_do_xfer(pmcmsptwi_cmd_to_reg(cmd), data);
+ if (retval != MSP_TWI_XFER_OK)
+ goto xfer_err;
+
+ if (cmd->type == MSP_TWI_CMD_READ ||
+ cmd->type == MSP_TWI_CMD_WRITE_READ) {
+ int i;
+ u64 rmsk = ~(0xffffffffffffffffLL << (cmd->read_len * 8));
+ u64 tmp = (u64)pmcmsptwi_readl(data->iobase +
+ MSP_TWI_DAT_0_REG_OFFSET);
+ if (cmd->read_len > 4)
+ tmp |= (u64)pmcmsptwi_readl(data->iobase +
+ MSP_TWI_DAT_1_REG_OFFSET) << 32;
+ tmp &= rmsk;
+ dev_dbg(&pmcmsptwi_adapter.dev, "Read 0x%016llx\n", tmp);
+
+ for (i = 0; i < cmd->read_len; i++)
+ cmd->read_data[i] = tmp >> i;
+ }
+
+xfer_err:
+ mutex_unlock(&data->lock);
+
+ return retval;
+}
+
+/* -- Algorithm functions -- */
+
+/*
+ * Sends an i2c command out on the adapter
+ */
+static int pmcmsptwi_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msg, int num)
+{
+ struct pmcmsptwi_data *data = i2c_get_adapdata(adap);
+ struct pmcmsptwi_cmd cmd;
+ struct pmcmsptwi_cfg oldcfg, newcfg;
+ int ret;
+
+ if (num > 2) {
+ dev_dbg(&adap->dev, "%d messages unsupported\n", num);
+ return -EINVAL;
+ } else if (num == 2) {
+ /* Check for a dual write-then-read command */
+ struct i2c_msg *nextmsg = msg + 1;
+ if (!(msg->flags & I2C_M_RD) &&
+ (nextmsg->flags & I2C_M_RD) &&
+ msg->addr == nextmsg->addr) {
+ cmd.type = MSP_TWI_CMD_WRITE_READ;
+ cmd.write_len = msg->len;
+ cmd.write_data = msg->buf;
+ cmd.read_len = nextmsg->len;
+ cmd.read_data = nextmsg->buf;
+ } else {
+ dev_dbg(&adap->dev,
+ "Non write-read dual messages unsupported\n");
+ return -EINVAL;
+ }
+ } else if (msg->flags & I2C_M_RD) {
+ cmd.type = MSP_TWI_CMD_READ;
+ cmd.read_len = msg->len;
+ cmd.read_data = msg->buf;
+ cmd.write_len = 0;
+ cmd.write_data = NULL;
+ } else {
+ cmd.type = MSP_TWI_CMD_WRITE;
+ cmd.read_len = 0;
+ cmd.read_data = NULL;
+ cmd.write_len = msg->len;
+ cmd.write_data = msg->buf;
+ }
+
+ if (msg->len == 0) {
+ dev_err(&adap->dev, "Zero-byte messages unsupported\n");
+ return -EINVAL;
+ }
+
+ cmd.addr = msg->addr;
+
+ if (msg->flags & I2C_M_TEN) {
+ pmcmsptwi_get_twi_config(&newcfg, data);
+ memcpy(&oldcfg, &newcfg, sizeof(oldcfg));
+
+ /* Set the special 10-bit address flag */
+ newcfg.add10 = 1;
+
+ pmcmsptwi_set_twi_config(&newcfg, data);
+ }
+
+ /* Execute the command */
+ ret = pmcmsptwi_xfer_cmd(&cmd, data);
+
+ if (msg->flags & I2C_M_TEN)
+ pmcmsptwi_set_twi_config(&oldcfg, data);
+
+ dev_dbg(&adap->dev, "I2C %s of %d bytes ",
+ (msg->flags & I2C_M_RD) ? "read" : "write", msg->len);
+ if (ret != MSP_TWI_XFER_OK) {
+ /*
+ * TODO: We could potentially loop and retry in the case
+ * of MSP_TWI_XFER_TIMEOUT.
+ */
+ dev_dbg(&adap->dev, "failed\n");
+ return -1;
+ }
+
+ dev_dbg(&adap->dev, "succeeded\n");
+ return 0;
+}
+
+static u32 pmcmsptwi_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+/* -- Initialization -- */
+
+static struct i2c_algorithm pmcmsptwi_algo = {
+ .master_xfer = pmcmsptwi_master_xfer,
+ .functionality = pmcmsptwi_i2c_func,
+};
+
+static struct i2c_adapter pmcmsptwi_adapter = {
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON,
+ .algo = &pmcmsptwi_algo,
+ .name = DRV_NAME,
+};
+
+static struct platform_driver pmcmsptwi_driver = {
+ .probe = pmcmsptwi_probe,
+ .remove = __devexit_p(pmcmsptwi_remove),
+ .driver {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pmcmsptwi_init(void)
+{
+ return platform_driver_register(&pmcmsptwi_driver);
+}
+
+static void __exit pmcmsptwi_exit(void)
+{
+ platform_driver_unregister(&pmcmsptwi_driver);
+}
+
+MODULE_DESCRIPTION("PMC MSP TWI/SMBus/I2C driver");
+MODULE_LICENSE("GPL");
+
+module_init(pmcmsptwi_init);
+module_exit(pmcmsptwi_exit);
if (rc)
goto bail;
rc = pmac_i2c_xfer(bus, addrdir, 1, command,
- read ? data->block : &data->block[1],
- data->block[0]);
+ &data->block[1], data->block[0]);
break;
default:
i2c->adap.class = plat->class;
}
- ret = i2c_add_adapter(&i2c->adap);
+ /*
+ * If "dev->id" is negative we consider it as zero.
+ * The reason to do so is to avoid sysfs names that only make
+ * sense when there are multiple adapters.
+ */
+ i2c->adap.nr = dev->id >= 0 ? dev->id : 0;
+
+ ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
goto eadapt;
+++ /dev/null
-/*
- * Embedded Planet RPX Lite MPC8xx CPM I2C interface.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
- *
- * moved into proper i2c interface;
- * Brad Parker (brad@heeltoe.com)
- *
- * RPX lite specific parts of the i2c interface
- * Update: There actually isn't anything RPXLite-specific about this module.
- * This should work for most any 8xx board. The console messages have been
- * changed to eliminate RPXLite references.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/stddef.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-8xx.h>
-#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
-
-
-static void
-rpx_iic_init(struct i2c_algo_8xx_data *data)
-{
- volatile cpm8xx_t *cp;
- volatile immap_t *immap;
-
- cp = cpmp; /* Get pointer to Communication Processor */
- immap = (immap_t *)IMAP_ADDR; /* and to internal registers */
-
- data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-
- /* Check for and use a microcode relocation patch.
- */
- if ((data->reloc = data->iip->iic_rpbase))
- data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase];
-
- data->i2c = (i2c8xx_t *)&(immap->im_i2c);
- data->cp = cp;
-
- /* Initialize Port B IIC pins.
- */
- cp->cp_pbpar |= 0x00000030;
- cp->cp_pbdir |= 0x00000030;
- cp->cp_pbodr |= 0x00000030;
-
- /* Allocate space for two transmit and two receive buffer
- * descriptors in the DP ram.
- */
- data->dp_addr = cpm_dpalloc(sizeof(cbd_t) * 4, 8);
-
- /* ptr to i2c area */
- data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c);
-}
-
-static int rpx_install_isr(int irq, void (*func)(void *), void *data)
-{
- /* install interrupt handler */
- cpm_install_handler(irq, func, data);
-
- return 0;
-}
-
-static struct i2c_algo_8xx_data rpx_data = {
- .setisr = rpx_install_isr
-};
-
-static struct i2c_adapter rpx_ops = {
- .owner = THIS_MODULE,
- .name = "m8xx",
- .id = I2C_HW_MPC8XX_EPON,
- .algo_data = &rpx_data,
-};
-
-int __init i2c_rpx_init(void)
-{
- printk(KERN_INFO "i2c-rpx: i2c MPC8xx driver\n");
-
- /* reset hardware to sane state */
- rpx_iic_init(&rpx_data);
-
- if (i2c_8xx_add_bus(&rpx_ops) < 0) {
- printk(KERN_ERR "i2c-rpx: Unable to register with I2C\n");
- return -ENODEV;
- }
-
- return 0;
-}
-
-void __exit i2c_rpx_exit(void)
-{
- i2c_8xx_del_bus(&rpx_ops);
-}
-
-MODULE_AUTHOR("Dan Malek <dmalek@jlc.net>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards");
-
-module_init(i2c_rpx_init);
-module_exit(i2c_rpx_exit);
/* This interfaces to the I2C bus of the Savage4 to gain access to
the BT869 and possibly other I2C devices. The DDC bus is not
yet supported because its register is not memory-mapped.
- However we leave the DDC code here, commented out, to make
- it easier to add later.
*/
#include <linux/kernel.h>
#include <linux/i2c-algo-bit.h>
#include <asm/io.h>
-/* 3DFX defines */
-#define PCI_CHIP_SAVAGE3D 0x8A20
-#define PCI_CHIP_SAVAGE3D_MV 0x8A21
+/* device IDs */
#define PCI_CHIP_SAVAGE4 0x8A22
#define PCI_CHIP_SAVAGE2000 0x9102
-#define PCI_CHIP_PROSAVAGE_PM 0x8A25
-#define PCI_CHIP_PROSAVAGE_KM 0x8A26
-#define PCI_CHIP_SAVAGE_MX_MV 0x8c10
-#define PCI_CHIP_SAVAGE_MX 0x8c11
-#define PCI_CHIP_SAVAGE_IX_MV 0x8c12
-#define PCI_CHIP_SAVAGE_IX 0x8c13
#define REG 0xff20 /* Serial Port 1 Register */
/* bit locations in the register */
-#define DDC_ENAB 0x00040000
-#define DDC_SCL_OUT 0x00080000
-#define DDC_SDA_OUT 0x00100000
-#define DDC_SCL_IN 0x00200000
-#define DDC_SDA_IN 0x00400000
#define I2C_ENAB 0x00000020
#define I2C_SCL_OUT 0x00000001
#define I2C_SDA_OUT 0x00000002
#define I2C_SCL_IN 0x00000008
#define I2C_SDA_IN 0x00000010
-/* initialization states */
-#define INIT2 0x20
-#define INIT3 0x04
-
/* delays */
#define CYCLE_DELAY 10
#define TIMEOUT (HZ / 2)
static struct pci_driver sis5595_driver;
static unsigned short sis5595_base;
+static struct pci_dev *sis5595_pdev;
static u8 sis5595_read(u8 reg)
{
static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
+ int err;
+
if (sis5595_setup(dev)) {
dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n");
return -ENODEV;
sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x",
sis5595_base + SMB_INDEX);
- return i2c_add_adapter(&sis5595_adapter);
-}
+ err = i2c_add_adapter(&sis5595_adapter);
+ if (err) {
+ release_region(sis5595_base + SMB_INDEX, 2);
+ return err;
+ }
-static void __devexit sis5595_remove(struct pci_dev *dev)
-{
- i2c_del_adapter(&sis5595_adapter);
- release_region(sis5595_base + SMB_INDEX, 2);
+ /* Always return failure here. This is to allow other drivers to bind
+ * to this pci device. We don't really want to have control over the
+ * pci device, we only wanted to read as few register values from it.
+ */
+ sis5595_pdev = pci_dev_get(dev);
+ return -ENODEV;
}
static struct pci_driver sis5595_driver = {
.name = "sis5595_smbus",
.id_table = sis5595_ids,
.probe = sis5595_probe,
- .remove = __devexit_p(sis5595_remove),
};
static int __init i2c_sis5595_init(void)
static void __exit i2c_sis5595_exit(void)
{
pci_unregister_driver(&sis5595_driver);
+ if (sis5595_pdev) {
+ i2c_del_adapter(&sis5595_adapter);
+ release_region(sis5595_base + SMB_INDEX, 2);
+ pci_dev_put(sis5595_pdev);
+ sis5595_pdev = NULL;
+ }
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
--- /dev/null
+/*
+ * Driver for the TAOS evaluation modules
+ * These devices include an I2C master which can be controlled over the
+ * serial port.
+ *
+ * Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#define TAOS_BUFFER_SIZE 63
+
+#define TAOS_STATE_INIT 0
+#define TAOS_STATE_IDLE 1
+#define TAOS_STATE_SEND 2
+#define TAOS_STATE_RECV 3
+
+#define TAOS_CMD_RESET 0x12
+
+static DECLARE_WAIT_QUEUE_HEAD(wq);
+
+struct taos_data {
+ struct i2c_adapter adapter;
+ struct i2c_client *client;
+ int state;
+ u8 addr; /* last used address */
+ unsigned char buffer[TAOS_BUFFER_SIZE];
+ unsigned int pos; /* position inside the buffer */
+};
+
+/* TAOS TSL2550 EVM */
+static struct i2c_board_info tsl2550_info = {
+ I2C_BOARD_INFO("tsl2550", 0x39),
+ .type = "tsl2550",
+};
+
+/* Instantiate i2c devices based on the adapter name */
+static struct i2c_client *taos_instantiate_device(struct i2c_adapter *adapter)
+{
+ if (!strncmp(adapter->name, "TAOS TSL2550 EVM", 16)) {
+ dev_info(&adapter->dev, "Instantiating device %s at 0x%02x\n",
+ tsl2550_info.driver_name, tsl2550_info.addr);
+ return i2c_new_device(adapter, &tsl2550_info);
+ }
+
+ return NULL;
+}
+
+static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ struct serio *serio = adapter->algo_data;
+ struct taos_data *taos = serio_get_drvdata(serio);
+ char *p;
+
+ /* Encode our transaction. "@" is for the device address, "$" for the
+ SMBus command and "#" for the data. */
+ p = taos->buffer;
+
+ /* The device remembers the last used address, no need to send it
+ again if it's the same */
+ if (addr != taos->addr)
+ p += sprintf(p, "@%02X", addr);
+
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_WRITE)
+ sprintf(p, "$#%02X", command);
+ else
+ sprintf(p, "$");
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (read_write == I2C_SMBUS_WRITE)
+ sprintf(p, "$%02X#%02X", command, data->byte);
+ else
+ sprintf(p, "$%02X", command);
+ break;
+ default:
+ dev_dbg(&adapter->dev, "Unsupported transaction size %d\n",
+ size);
+ return -EINVAL;
+ }
+
+ /* Send the transaction to the TAOS EVM */
+ dev_dbg(&adapter->dev, "Command buffer: %s\n", taos->buffer);
+ taos->pos = 0;
+ taos->state = TAOS_STATE_SEND;
+ serio_write(serio, taos->buffer[0]);
+ wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+ msecs_to_jiffies(250));
+ if (taos->state != TAOS_STATE_IDLE) {
+ dev_err(&adapter->dev, "Transaction failed "
+ "(state=%d, pos=%d)\n", taos->state, taos->pos);
+ taos->addr = 0;
+ return -EIO;
+ }
+ taos->addr = addr;
+
+ /* Start the transaction and read the answer */
+ taos->pos = 0;
+ taos->state = TAOS_STATE_RECV;
+ serio_write(serio, read_write == I2C_SMBUS_WRITE ? '>' : '<');
+ wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+ msecs_to_jiffies(150));
+ if (taos->state != TAOS_STATE_IDLE
+ || taos->pos != 6) {
+ dev_err(&adapter->dev, "Transaction timeout (pos=%d)\n",
+ taos->pos);
+ return -EIO;
+ }
+ dev_dbg(&adapter->dev, "Answer buffer: %s\n", taos->buffer);
+
+ /* Interpret the returned string */
+ p = taos->buffer + 2;
+ p[3] = '\0';
+ if (!strcmp(p, "NAK"))
+ return -ENODEV;
+
+ if (read_write == I2C_SMBUS_WRITE) {
+ if (!strcmp(p, "ACK"))
+ return 0;
+ } else {
+ if (p[0] == 'x') {
+ data->byte = simple_strtol(p + 1, NULL, 16);
+ return 0;
+ }
+ }
+
+ return -EIO;
+}
+
+static u32 taos_smbus_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static const struct i2c_algorithm taos_algorithm = {
+ .smbus_xfer = taos_smbus_xfer,
+ .functionality = taos_smbus_func,
+};
+
+static irqreturn_t taos_interrupt(struct serio *serio, unsigned char data,
+ unsigned int flags)
+{
+ struct taos_data *taos = serio_get_drvdata(serio);
+
+ switch (taos->state) {
+ case TAOS_STATE_INIT:
+ taos->buffer[taos->pos++] = data;
+ if (data == ':'
+ || taos->pos == TAOS_BUFFER_SIZE - 1) {
+ taos->buffer[taos->pos] = '\0';
+ taos->state = TAOS_STATE_IDLE;
+ wake_up_interruptible(&wq);
+ }
+ break;
+ case TAOS_STATE_SEND:
+ if (taos->buffer[++taos->pos])
+ serio_write(serio, taos->buffer[taos->pos]);
+ else {
+ taos->state = TAOS_STATE_IDLE;
+ wake_up_interruptible(&wq);
+ }
+ break;
+ case TAOS_STATE_RECV:
+ taos->buffer[taos->pos++] = data;
+ if (data == ']') {
+ taos->buffer[taos->pos] = '\0';
+ taos->state = TAOS_STATE_IDLE;
+ wake_up_interruptible(&wq);
+ }
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* Extract the adapter name from the buffer received after reset.
+ The buffer is modified and a pointer inside the buffer is returned. */
+static char *taos_adapter_name(char *buffer)
+{
+ char *start, *end;
+
+ start = strstr(buffer, "TAOS ");
+ if (!start)
+ return NULL;
+
+ end = strchr(start, '\r');
+ if (!end)
+ return NULL;
+ *end = '\0';
+
+ return start;
+}
+
+static int taos_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct taos_data *taos;
+ struct i2c_adapter *adapter;
+ char *name;
+ int err;
+
+ taos = kzalloc(sizeof(struct taos_data), GFP_KERNEL);
+ if (!taos) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ taos->state = TAOS_STATE_INIT;
+ serio_set_drvdata(serio, taos);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto exit_kfree;
+
+ adapter = &taos->adapter;
+ adapter->owner = THIS_MODULE;
+ adapter->algo = &taos_algorithm;
+ adapter->algo_data = serio;
+ adapter->dev.parent = &serio->dev;
+
+ /* Reset the TAOS evaluation module to identify it */
+ serio_write(serio, TAOS_CMD_RESET);
+ wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+ msecs_to_jiffies(2000));
+
+ if (taos->state != TAOS_STATE_IDLE) {
+ err = -ENODEV;
+ dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, "
+ "pos=%d)\n", taos->state, taos->pos);
+ goto exit_close;
+ }
+
+ name = taos_adapter_name(taos->buffer);
+ if (!name) {
+ err = -ENODEV;
+ dev_err(&serio->dev, "TAOS EVM identification failed\n");
+ goto exit_close;
+ }
+ strlcpy(adapter->name, name, sizeof(adapter->name));
+
+ err = i2c_add_adapter(adapter);
+ if (err)
+ goto exit_close;
+ dev_dbg(&serio->dev, "Connected to TAOS EVM\n");
+
+ taos->client = taos_instantiate_device(adapter);
+ return 0;
+
+ exit_close:
+ serio_close(serio);
+ exit_kfree:
+ serio_set_drvdata(serio, NULL);
+ kfree(taos);
+ exit:
+ return err;
+}
+
+static void taos_disconnect(struct serio *serio)
+{
+ struct taos_data *taos = serio_get_drvdata(serio);
+
+ if (taos->client)
+ i2c_unregister_device(taos->client);
+ i2c_del_adapter(&taos->adapter);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ kfree(taos);
+
+ dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n");
+}
+
+static struct serio_device_id taos_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_TAOSEVM,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(serio, taos_serio_ids);
+
+static struct serio_driver taos_drv = {
+ .driver = {
+ .name = "taos-evm",
+ },
+ .description = "TAOS evaluation module driver",
+ .id_table = taos_serio_ids,
+ .connect = taos_connect,
+ .disconnect = taos_disconnect,
+ .interrupt = taos_interrupt,
+};
+
+static int __init taos_init(void)
+{
+ return serio_register_driver(&taos_drv);
+}
+
+static void __exit taos_exit(void)
+{
+ serio_unregister_driver(&taos_drv);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("TAOS evaluation module driver");
+MODULE_LICENSE("GPL");
+
+module_init(taos_init);
+module_exit(taos_exit);
if (!(vt596_features & FEATURE_I2CBLOCK))
goto exit_unsupported;
if (read_write == I2C_SMBUS_READ)
- outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0);
+ outb_p(data->block[0], SMBHSTDAT0);
/* Fall through */
case I2C_SMBUS_BLOCK_DATA:
outb_p(command, SMBHSTCMD);
case PCI_DEVICE_ID_VIA_82C686_4:
/* The VT82C686B (rev 0x40) does support I2C block
transactions, but the VT82C686A (rev 0x30) doesn't */
- if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
- && temp >= 0x40)
+ if (pdev->revision >= 0x40)
vt596_features |= FEATURE_I2CBLOCK;
break;
}
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
- if (rw == I2C_SMBUS_READ)
- data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
len = data->block[0];
if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
return -EINVAL;
};
static struct scx200_acb_iface *scx200_acb_list;
-static DECLARE_MUTEX(scx200_acb_list_mutex);
+static DEFINE_MUTEX(scx200_acb_list_mutex);
static __init int scx200_acb_probe(struct scx200_acb_iface *iface)
{
return -ENODEV;
}
- down(&scx200_acb_list_mutex);
+ mutex_lock(&scx200_acb_list_mutex);
iface->next = scx200_acb_list;
scx200_acb_list = iface;
- up(&scx200_acb_list_mutex);
+ mutex_unlock(&scx200_acb_list_mutex);
return 0;
}
{
struct scx200_acb_iface *iface;
- down(&scx200_acb_list_mutex);
+ mutex_lock(&scx200_acb_list_mutex);
while ((iface = scx200_acb_list) != NULL) {
scx200_acb_list = iface->next;
- up(&scx200_acb_list_mutex);
+ mutex_unlock(&scx200_acb_list_mutex);
i2c_del_adapter(&iface->adapter);
release_region(iface->base, 8);
kfree(iface);
- down(&scx200_acb_list_mutex);
+ mutex_lock(&scx200_acb_list_mutex);
}
- up(&scx200_acb_list_mutex);
+ mutex_unlock(&scx200_acb_list_mutex);
}
module_init(scx200_acb_init);
menu "Miscellaneous I2C Chip support"
config SENSORS_DS1337
- tristate "Dallas Semiconductor DS1337 and DS1339 Real Time Clock"
+ tristate "Dallas DS1337 and DS1339 Real Time Clock (DEPRECATED)"
depends on EXPERIMENTAL
help
If you say yes here you get support for Dallas Semiconductor
This driver can also be built as a module. If so, the module
will be called ds1337.
+ This driver is deprecated and will be dropped soon. Use
+ rtc-ds1307 instead.
+
config SENSORS_DS1374
- tristate "Maxim/Dallas Semiconductor DS1374 Real Time Clock"
+ tristate "Dallas DS1374 Real Time Clock (DEPRECATED)"
depends on EXPERIMENTAL
help
If you say yes here you get support for Dallas Semiconductor
This driver can also be built as a module. If so, the module
will be called ds1374.
+ This driver is deprecated and will be dropped soon. Use
+ rtc-ds1374 instead.
+
+config DS1682
+ tristate "Dallas DS1682 Total Elapsed Time Recorder with Alarm"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get support for Dallas Semiconductor
+ DS1682 Total Elapsed Time Recorder.
+
+ This driver can also be built as a module. If so, the module
+ will be called ds1682.
+
config SENSORS_EEPROM
tristate "EEPROM reader"
depends on EXPERIMENTAL
will be called tps65010.
config SENSORS_M41T00
- tristate "ST M41T00 RTC chip"
+ tristate "ST M41T00 RTC chip (DEPRECATED)"
depends on PPC32
help
If you say yes here you get support for the ST M41T00 RTC chip.
This driver can also be built as a module. If so, the module
will be called m41t00.
+ This driver is deprecated and will be dropped soon. Use
+ rtc-ds1307 or rtc-m41t80 instead.
+
config SENSORS_MAX6875
tristate "Maxim MAX6875 Power supply supervisor"
depends on EXPERIMENTAL
This driver can also be built as a module. If so, the module
will be called max6875.
+config SENSORS_TSL2550
+ tristate "Taos TSL2550 ambient light sensor"
+ depends on EXPERIMENTAL
+ help
+ If you say yes here you get support for the Taos TSL2550
+ ambient light sensor.
+
+ This driver can also be built as a module. If so, the module
+ will be called tsl2550.
+
endmenu
obj-$(CONFIG_SENSORS_DS1337) += ds1337.o
obj-$(CONFIG_SENSORS_DS1374) += ds1374.o
+obj-$(CONFIG_DS1682) += ds1682.o
obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o
obj-$(CONFIG_SENSORS_MAX6875) += max6875.o
obj-$(CONFIG_SENSORS_M41T00) += m41t00.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o
obj-$(CONFIG_TPS65010) += tps65010.o
+obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
ifeq ($(CONFIG_I2C_DEBUG_CHIP),y)
EXTRA_CFLAGS += -DDEBUG
--- /dev/null
+/*
+ * Dallas Semiconductor DS1682 Elapsed Time Recorder device driver
+ *
+ * Written by: Grant Likely <grant.likely@secretlab.ca>
+ *
+ * Copyright (C) 2007 Secret Lab Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * The DS1682 elapsed timer recorder is a simple device that implements
+ * one elapsed time counter, one event counter, an alarm signal and 10
+ * bytes of general purpose EEPROM.
+ *
+ * This driver provides access to the DS1682 counters and user data via
+ * the sysfs. The following attributes are added to the device node:
+ * elapsed_time (u32): Total elapsed event time in ms resolution
+ * alarm_time (u32): When elapsed time exceeds the value in alarm_time,
+ * then the alarm pin is asserted.
+ * event_count (u16): number of times the event pin has gone low.
+ * eeprom (u8[10]): general purpose EEPROM
+ *
+ * Counter registers and user data are both read/write unless the device
+ * has been write protected. This driver does not support turning off write
+ * protection. Once write protection is turned on, it is impossible to
+ * turn it off again, so I have left the feature out of this driver to avoid
+ * accidental enabling, but it is trivial to add write protect support.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <linux/sysfs.h>
+#include <linux/ctype.h>
+#include <linux/hwmon-sysfs.h>
+
+/* Device registers */
+#define DS1682_REG_CONFIG 0x00
+#define DS1682_REG_ALARM 0x01
+#define DS1682_REG_ELAPSED 0x05
+#define DS1682_REG_EVT_CNTR 0x09
+#define DS1682_REG_EEPROM 0x0b
+#define DS1682_REG_RESET 0x1d
+#define DS1682_REG_WRITE_DISABLE 0x1e
+#define DS1682_REG_WRITE_MEM_DISABLE 0x1f
+
+#define DS1682_EEPROM_SIZE 10
+
+/*
+ * Generic counter attributes
+ */
+static ssize_t ds1682_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ __le32 val = 0;
+ int rc;
+
+ dev_dbg(dev, "ds1682_show() called on %s\n", attr->attr.name);
+
+ /* Read the register */
+ rc = i2c_smbus_read_i2c_block_data(client, sattr->index, sattr->nr,
+ (u8 *) & val);
+ if (rc < 0)
+ return -EIO;
+
+ /* Special case: the 32 bit regs are time values with 1/4s
+ * resolution, scale them up to milliseconds */
+ if (sattr->nr == 4)
+ return sprintf(buf, "%llu\n", ((u64) le32_to_cpu(val)) * 250);
+
+ /* Format the output string and return # of bytes */
+ return sprintf(buf, "%li\n", (long)le32_to_cpu(val));
+}
+
+static ssize_t ds1682_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct i2c_client *client = to_i2c_client(dev);
+ char *endp;
+ u64 val;
+ __le32 val_le;
+ int rc;
+
+ dev_dbg(dev, "ds1682_store() called on %s\n", attr->attr.name);
+
+ /* Decode input */
+ val = simple_strtoull(buf, &endp, 0);
+ if (buf == endp) {
+ dev_dbg(dev, "input string not a number\n");
+ return -EINVAL;
+ }
+
+ /* Special case: the 32 bit regs are time values with 1/4s
+ * resolution, scale input down to quarter-seconds */
+ if (sattr->nr == 4)
+ do_div(val, 250);
+
+ /* write out the value */
+ val_le = cpu_to_le32(val);
+ rc = i2c_smbus_write_i2c_block_data(client, sattr->index, sattr->nr,
+ (u8 *) & val_le);
+ if (rc < 0) {
+ dev_err(dev, "register write failed; reg=0x%x, size=%i\n",
+ sattr->index, sattr->nr);
+ return -EIO;
+ }
+
+ return count;
+}
+
+/*
+ * Simple register attributes
+ */
+static SENSOR_DEVICE_ATTR_2(elapsed_time, S_IRUGO | S_IWUSR, ds1682_show,
+ ds1682_store, 4, DS1682_REG_ELAPSED);
+static SENSOR_DEVICE_ATTR_2(alarm_time, S_IRUGO | S_IWUSR, ds1682_show,
+ ds1682_store, 4, DS1682_REG_ALARM);
+static SENSOR_DEVICE_ATTR_2(event_count, S_IRUGO | S_IWUSR, ds1682_show,
+ ds1682_store, 2, DS1682_REG_EVT_CNTR);
+
+static const struct attribute_group ds1682_group = {
+ .attrs = (struct attribute *[]) {
+ &sensor_dev_attr_elapsed_time.dev_attr.attr,
+ &sensor_dev_attr_alarm_time.dev_attr.attr,
+ &sensor_dev_attr_event_count.dev_attr.attr,
+ NULL,
+ },
+};
+
+/*
+ * User data attribute
+ */
+static ssize_t ds1682_eeprom_read(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct i2c_client *client = kobj_to_i2c_client(kobj);
+ int rc;
+
+ dev_dbg(&client->dev, "ds1682_eeprom_read(p=%p, off=%lli, c=%zi)\n",
+ buf, off, count);
+
+ if (off >= DS1682_EEPROM_SIZE)
+ return 0;
+
+ if (off + count > DS1682_EEPROM_SIZE)
+ count = DS1682_EEPROM_SIZE - off;
+
+ rc = i2c_smbus_read_i2c_block_data(client, DS1682_REG_EEPROM + off,
+ count, buf);
+ if (rc < 0)
+ return -EIO;
+
+ return count;
+}
+
+static ssize_t ds1682_eeprom_write(struct kobject *kobj, char *buf, loff_t off,
+ size_t count)
+{
+ struct i2c_client *client = kobj_to_i2c_client(kobj);
+
+ dev_dbg(&client->dev, "ds1682_eeprom_write(p=%p, off=%lli, c=%zi)\n",
+ buf, off, count);
+
+ if (off >= DS1682_EEPROM_SIZE)
+ return -ENOSPC;
+
+ if (off + count > DS1682_EEPROM_SIZE)
+ count = DS1682_EEPROM_SIZE - off;
+
+ /* Write out to the device */
+ if (i2c_smbus_write_i2c_block_data(client, DS1682_REG_EEPROM + off,
+ count, buf) < 0)
+ return -EIO;
+
+ return count;
+}
+
+static struct bin_attribute ds1682_eeprom_attr = {
+ .attr = {
+ .name = "eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ .owner = THIS_MODULE,
+ },
+ .size = DS1682_EEPROM_SIZE,
+ .read = ds1682_eeprom_read,
+ .write = ds1682_eeprom_write,
+};
+
+/*
+ * Called when a ds1682 device is matched with this driver
+ */
+static int ds1682_probe(struct i2c_client *client)
+{
+ int rc;
+
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_I2C_BLOCK)) {
+ dev_err(&client->dev, "i2c bus does not support the ds1682\n");
+ rc = -ENODEV;
+ goto exit;
+ }
+
+ rc = sysfs_create_group(&client->dev.kobj, &ds1682_group);
+ if (rc)
+ goto exit;
+
+ rc = sysfs_create_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
+ if (rc)
+ goto exit_bin_attr;
+
+ return 0;
+
+ exit_bin_attr:
+ sysfs_remove_group(&client->dev.kobj, &ds1682_group);
+ exit:
+ return rc;
+}
+
+static int ds1682_remove(struct i2c_client *client)
+{
+ sysfs_remove_bin_file(&client->dev.kobj, &ds1682_eeprom_attr);
+ sysfs_remove_group(&client->dev.kobj, &ds1682_group);
+ return 0;
+}
+
+static struct i2c_driver ds1682_driver = {
+ .driver = {
+ .name = "ds1682",
+ },
+ .probe = ds1682_probe,
+ .remove = ds1682_remove,
+};
+
+static int __init ds1682_init(void)
+{
+ return i2c_add_driver(&ds1682_driver);
+}
+
+static void __exit ds1682_exit(void)
+{
+ i2c_del_driver(&ds1682_driver);
+}
+
+MODULE_AUTHOR("Grant Likely <grant.likely@secretlab.ca>");
+MODULE_DESCRIPTION("DS1682 Elapsed Time Indicator driver");
+MODULE_LICENSE("GPL");
+
+module_init(ds1682_init);
+module_exit(ds1682_exit);
dev_dbg(&client->dev, "Starting eeprom update, slice %u\n", slice);
if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
- for (i = slice << 5; i < (slice + 1) << 5; i += I2C_SMBUS_BLOCK_MAX)
- if (i2c_smbus_read_i2c_block_data(client, i, data->data + i) != I2C_SMBUS_BLOCK_MAX)
+ for (i = slice << 5; i < (slice + 1) << 5; i += 32)
+ if (i2c_smbus_read_i2c_block_data(client, i,
+ 32, data->data + i)
+ != 32)
goto exit;
} else {
if (i2c_smbus_write_byte(client, slice << 5)) {
mutex_unlock(&data->update_lock);
}
-static ssize_t eeprom_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t eeprom_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj));
struct eeprom_data *data = i2c_get_clientdata(client);
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = EEPROM_SIZE,
.read = eeprom_read,
I2C_FUNC_SMBUS_READ_I2C_BLOCK)) {
if (i2c_smbus_read_i2c_block_data(client,
MAX6875_CMD_BLK_READ,
+ SLICE_SIZE,
buf) != SLICE_SIZE) {
goto exit_up;
}
mutex_unlock(&data->update_lock);
}
-static ssize_t max6875_read(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+static ssize_t max6875_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct i2c_client *client = kobj_to_i2c_client(kobj);
struct max6875_data *data = i2c_get_clientdata(client);
.attr = {
.name = "eeprom",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = USER_EEPROM_SIZE,
.read = max6875_read,
--- /dev/null
+/*
+ * tsl2550.c - Linux kernel modules for ambient light sensor
+ *
+ * Copyright (C) 2007 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2007 Eurotech S.p.A. <info@eurotech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+
+#define TSL2550_DRV_NAME "tsl2550"
+#define DRIVER_VERSION "1.1.1"
+
+/*
+ * Defines
+ */
+
+#define TSL2550_POWER_DOWN 0x00
+#define TSL2550_POWER_UP 0x03
+#define TSL2550_STANDARD_RANGE 0x18
+#define TSL2550_EXTENDED_RANGE 0x1d
+#define TSL2550_READ_ADC0 0x43
+#define TSL2550_READ_ADC1 0x83
+
+/*
+ * Structs
+ */
+
+struct tsl2550_data {
+ struct i2c_client *client;
+ struct mutex update_lock;
+
+ unsigned int power_state : 1;
+ unsigned int operating_mode : 1;
+};
+
+/*
+ * Global data
+ */
+
+static const u8 TSL2550_MODE_RANGE[2] = {
+ TSL2550_STANDARD_RANGE, TSL2550_EXTENDED_RANGE,
+};
+
+/*
+ * Management functions
+ */
+
+static int tsl2550_set_operating_mode(struct i2c_client *client, int mode)
+{
+ struct tsl2550_data *data = i2c_get_clientdata(client);
+
+ int ret = i2c_smbus_write_byte(client, TSL2550_MODE_RANGE[mode]);
+
+ data->operating_mode = mode;
+
+ return ret;
+}
+
+static int tsl2550_set_power_state(struct i2c_client *client, int state)
+{
+ struct tsl2550_data *data = i2c_get_clientdata(client);
+ int ret;
+
+ if (state == 0)
+ ret = i2c_smbus_write_byte(client, TSL2550_POWER_DOWN);
+ else {
+ ret = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+
+ /* On power up we should reset operating mode also... */
+ tsl2550_set_operating_mode(client, data->operating_mode);
+ }
+
+ data->power_state = state;
+
+ return ret;
+}
+
+static int tsl2550_get_adc_value(struct i2c_client *client, u8 cmd)
+{
+ unsigned long end;
+ int loop = 0, ret = 0;
+
+ /*
+ * Read ADC channel waiting at most 400ms (see data sheet for further
+ * info).
+ * To avoid long busy wait we spin for few milliseconds then
+ * start sleeping.
+ */
+ end = jiffies + msecs_to_jiffies(400);
+ while (time_before(jiffies, end)) {
+ i2c_smbus_write_byte(client, cmd);
+
+ if (loop++ < 5)
+ mdelay(1);
+ else
+ msleep(1);
+
+ ret = i2c_smbus_read_byte(client);
+ if (ret < 0)
+ return ret;
+ else if (ret & 0x0080)
+ break;
+ }
+ if (!(ret & 0x80))
+ return -EIO;
+ return ret & 0x7f; /* remove the "valid" bit */
+}
+
+/*
+ * LUX calculation
+ */
+
+#define TSL2550_MAX_LUX 1846
+
+static const u8 ratio_lut[] = {
+ 100, 100, 100, 100, 100, 100, 100, 100,
+ 100, 100, 100, 100, 100, 100, 99, 99,
+ 99, 99, 99, 99, 99, 99, 99, 99,
+ 99, 99, 99, 98, 98, 98, 98, 98,
+ 98, 98, 97, 97, 97, 97, 97, 96,
+ 96, 96, 96, 95, 95, 95, 94, 94,
+ 93, 93, 93, 92, 92, 91, 91, 90,
+ 89, 89, 88, 87, 87, 86, 85, 84,
+ 83, 82, 81, 80, 79, 78, 77, 75,
+ 74, 73, 71, 69, 68, 66, 64, 62,
+ 60, 58, 56, 54, 52, 49, 47, 44,
+ 42, 41, 40, 40, 39, 39, 38, 38,
+ 37, 37, 37, 36, 36, 36, 35, 35,
+ 35, 35, 34, 34, 34, 34, 33, 33,
+ 33, 33, 32, 32, 32, 32, 32, 31,
+ 31, 31, 31, 31, 30, 30, 30, 30,
+ 30,
+};
+
+static const u16 count_lut[] = {
+ 0, 1, 2, 3, 4, 5, 6, 7,
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 18, 20, 22, 24, 26, 28, 30,
+ 32, 34, 36, 38, 40, 42, 44, 46,
+ 49, 53, 57, 61, 65, 69, 73, 77,
+ 81, 85, 89, 93, 97, 101, 105, 109,
+ 115, 123, 131, 139, 147, 155, 163, 171,
+ 179, 187, 195, 203, 211, 219, 227, 235,
+ 247, 263, 279, 295, 311, 327, 343, 359,
+ 375, 391, 407, 423, 439, 455, 471, 487,
+ 511, 543, 575, 607, 639, 671, 703, 735,
+ 767, 799, 831, 863, 895, 927, 959, 991,
+ 1039, 1103, 1167, 1231, 1295, 1359, 1423, 1487,
+ 1551, 1615, 1679, 1743, 1807, 1871, 1935, 1999,
+ 2095, 2223, 2351, 2479, 2607, 2735, 2863, 2991,
+ 3119, 3247, 3375, 3503, 3631, 3759, 3887, 4015,
+};
+
+/*
+ * This function is described into Taos TSL2550 Designer's Notebook
+ * pages 2, 3.
+ */
+static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
+{
+ unsigned int lux;
+
+ /* Look up count from channel values */
+ u16 c0 = count_lut[ch0];
+ u16 c1 = count_lut[ch1];
+
+ /*
+ * Calculate ratio.
+ * Note: the "128" is a scaling factor
+ */
+ u8 r = 128;
+
+ /* Avoid division by 0 and count 1 cannot be greater than count 0 */
+ if (c0 && (c1 <= c0))
+ r = c1 * 128 / c0;
+ else
+ return -1;
+
+ /* Calculate LUX */
+ lux = ((c0 - c1) * ratio_lut[r]) / 256;
+
+ /* LUX range check */
+ return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
+}
+
+/*
+ * SysFS support
+ */
+
+static ssize_t tsl2550_show_power_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+ return sprintf(buf, "%u\n", data->power_state);
+}
+
+static ssize_t tsl2550_store_power_state(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tsl2550_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ int ret;
+
+ if (val < 0 || val > 1)
+ return -EINVAL;
+
+ mutex_lock(&data->update_lock);
+ ret = tsl2550_set_power_state(client, val);
+ mutex_unlock(&data->update_lock);
+
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(power_state, S_IWUSR | S_IRUGO,
+ tsl2550_show_power_state, tsl2550_store_power_state);
+
+static ssize_t tsl2550_show_operating_mode(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct tsl2550_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+ return sprintf(buf, "%u\n", data->operating_mode);
+}
+
+static ssize_t tsl2550_store_operating_mode(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tsl2550_data *data = i2c_get_clientdata(client);
+ unsigned long val = simple_strtoul(buf, NULL, 10);
+ int ret;
+
+ if (val < 0 || val > 1)
+ return -EINVAL;
+
+ if (data->power_state == 0)
+ return -EBUSY;
+
+ mutex_lock(&data->update_lock);
+ ret = tsl2550_set_operating_mode(client, val);
+ mutex_unlock(&data->update_lock);
+
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(operating_mode, S_IWUSR | S_IRUGO,
+ tsl2550_show_operating_mode, tsl2550_store_operating_mode);
+
+static ssize_t __tsl2550_show_lux(struct i2c_client *client, char *buf)
+{
+ u8 ch0, ch1;
+ int ret;
+
+ ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC0);
+ if (ret < 0)
+ return ret;
+ ch0 = ret;
+
+ mdelay(1);
+
+ ret = tsl2550_get_adc_value(client, TSL2550_READ_ADC1);
+ if (ret < 0)
+ return ret;
+ ch1 = ret;
+
+ /* Do the job */
+ ret = tsl2550_calculate_lux(ch0, ch1);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", ret);
+}
+
+static ssize_t tsl2550_show_lux1_input(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct tsl2550_data *data = i2c_get_clientdata(client);
+ int ret;
+
+ /* No LUX data if not operational */
+ if (!data->power_state)
+ return -EBUSY;
+
+ mutex_lock(&data->update_lock);
+ ret = __tsl2550_show_lux(client, buf);
+ mutex_unlock(&data->update_lock);
+
+ return ret;
+}
+
+static DEVICE_ATTR(lux1_input, S_IRUGO,
+ tsl2550_show_lux1_input, NULL);
+
+static struct attribute *tsl2550_attributes[] = {
+ &dev_attr_power_state.attr,
+ &dev_attr_operating_mode.attr,
+ &dev_attr_lux1_input.attr,
+ NULL
+};
+
+static const struct attribute_group tsl2550_attr_group = {
+ .attrs = tsl2550_attributes,
+};
+
+/*
+ * Initialization function
+ */
+
+static int tsl2550_init_client(struct i2c_client *client)
+{
+ struct tsl2550_data *data = i2c_get_clientdata(client);
+ int err;
+
+ /*
+ * Probe the chip. To do so we try to power up the device and then to
+ * read back the 0x03 code
+ */
+ err = i2c_smbus_write_byte(client, TSL2550_POWER_UP);
+ if (err < 0)
+ return err;
+ mdelay(1);
+ if (i2c_smbus_read_byte(client) != TSL2550_POWER_UP)
+ return -ENODEV;
+ data->power_state = 1;
+
+ /* Set the default operating mode */
+ err = i2c_smbus_write_byte(client,
+ TSL2550_MODE_RANGE[data->operating_mode]);
+ if (err < 0)
+ return err;
+
+ return 0;
+}
+
+/*
+ * I2C init/probing/exit functions
+ */
+
+static struct i2c_driver tsl2550_driver;
+static int __devinit tsl2550_probe(struct i2c_client *client)
+{
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+ struct tsl2550_data *data;
+ int *opmode, err = 0;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE)) {
+ err = -EIO;
+ goto exit;
+ }
+
+ data = kzalloc(sizeof(struct tsl2550_data), GFP_KERNEL);
+ if (!data) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ data->client = client;
+ i2c_set_clientdata(client, data);
+
+ /* Check platform data */
+ opmode = client->dev.platform_data;
+ if (opmode) {
+ if (*opmode < 0 || *opmode > 1) {
+ dev_err(&client->dev, "invalid operating_mode (%d)\n",
+ *opmode);
+ err = -EINVAL;
+ goto exit_kfree;
+ }
+ data->operating_mode = *opmode;
+ } else
+ data->operating_mode = 0; /* default mode is standard */
+ dev_info(&client->dev, "%s operating mode\n",
+ data->operating_mode ? "extended" : "standard");
+
+ mutex_init(&data->update_lock);
+
+ /* Initialize the TSL2550 chip */
+ err = tsl2550_init_client(client);
+ if (err)
+ goto exit_kfree;
+
+ /* Register sysfs hooks */
+ err = sysfs_create_group(&client->dev.kobj, &tsl2550_attr_group);
+ if (err)
+ goto exit_kfree;
+
+ dev_info(&client->dev, "support ver. %s enabled\n", DRIVER_VERSION);
+
+ return 0;
+
+exit_kfree:
+ kfree(data);
+exit:
+ return err;
+}
+
+static int __devexit tsl2550_remove(struct i2c_client *client)
+{
+ sysfs_remove_group(&client->dev.kobj, &tsl2550_attr_group);
+
+ /* Power down the device */
+ tsl2550_set_power_state(client, 0);
+
+ kfree(i2c_get_clientdata(client));
+
+ return 0;
+}
+
+static struct i2c_driver tsl2550_driver = {
+ .driver = {
+ .name = TSL2550_DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = tsl2550_probe,
+ .remove = __devexit_p(tsl2550_remove),
+};
+
+static int __init tsl2550_init(void)
+{
+ return i2c_add_driver(&tsl2550_driver);
+}
+
+static void __exit tsl2550_exit(void)
+{
+ i2c_del_driver(&tsl2550_driver);
+}
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("TSL2550 ambient light sensor driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
+
+module_init(tsl2550_init);
+module_exit(tsl2550_exit);
* i2c_new_device - instantiate an i2c device for use with a new style driver
* @adap: the adapter managing the device
* @info: describes one I2C device; bus_num is ignored
+ * Context: can sleep
*
* Create a device to work with a new style i2c driver, where binding is
* handled through driver model probe()/remove() methods. This call is not
/**
* i2c_unregister_device - reverse effect of i2c_new_device()
* @client: value returned from i2c_new_device()
+ * Context: can sleep
*/
void i2c_unregister_device(struct i2c_client *client)
{
/**
* i2c_add_adapter - declare i2c adapter, use dynamic bus number
* @adapter: the adapter to add
+ * Context: can sleep
*
* This routine is used to declare an I2C adapter when its bus number
* doesn't matter. Examples: for I2C adapters dynamically added by
/**
* i2c_add_numbered_adapter - declare i2c adapter, use static bus number
* @adap: the adapter to register (with adap->nr initialized)
+ * Context: can sleep
*
* This routine is used to declare an I2C adapter when its bus number
* matters. Example: for I2C adapters from system-on-chip CPUs, or
}
EXPORT_SYMBOL_GPL(i2c_add_numbered_adapter);
+/**
+ * i2c_del_adapter - unregister I2C adapter
+ * @adap: the adapter being unregistered
+ * Context: can sleep
+ *
+ * This unregisters an I2C adapter which was previously registered
+ * by @i2c_add_adapter or @i2c_add_numbered_adapter.
+ */
int i2c_del_adapter(struct i2c_adapter *adap)
{
struct list_head *item, *_n;
/**
* i2c_del_driver - unregister I2C driver
* @driver: the driver being unregistered
+ * Context: can sleep
*/
void i2c_del_driver(struct i2c_driver *driver)
{
EXPORT_SYMBOL(i2c_smbus_write_block_data);
/* Returns the number of read bytes */
-s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *values)
+s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command,
+ u8 length, u8 *values)
{
union i2c_smbus_data data;
+ if (length > I2C_SMBUS_BLOCK_MAX)
+ length = I2C_SMBUS_BLOCK_MAX;
+ data.block[0] = length;
if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_READ,command,
I2C_SMBUS_I2C_BLOCK_DATA,&data))
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
- msg[1].len = I2C_SMBUS_BLOCK_MAX;
+ msg[1].len = data->block[0];
} else {
msg[0].len = data->block[0] + 1;
if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
data->word = msgbuf1[0] | (msgbuf1[1] << 8);
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
- /* fixed at 32 for now */
- data->block[0] = I2C_SMBUS_BLOCK_MAX;
- for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
+ for (i = 0; i < data->block[0]; i++)
data->block[i+1] = msgbuf1[i];
break;
case I2C_SMBUS_BLOCK_DATA:
(data_arg.size != I2C_SMBUS_WORD_DATA) &&
(data_arg.size != I2C_SMBUS_PROC_CALL) &&
(data_arg.size != I2C_SMBUS_BLOCK_DATA) &&
+ (data_arg.size != I2C_SMBUS_I2C_BLOCK_BROKEN) &&
(data_arg.size != I2C_SMBUS_I2C_BLOCK_DATA) &&
(data_arg.size != I2C_SMBUS_BLOCK_PROC_CALL)) {
dev_dbg(&client->adapter->dev,
if ((data_arg.size == I2C_SMBUS_PROC_CALL) ||
(data_arg.size == I2C_SMBUS_BLOCK_PROC_CALL) ||
+ (data_arg.size == I2C_SMBUS_I2C_BLOCK_DATA) ||
(data_arg.read_write == I2C_SMBUS_WRITE)) {
if (copy_from_user(&temp, data_arg.data, datasize))
return -EFAULT;
}
+ if (data_arg.size == I2C_SMBUS_I2C_BLOCK_BROKEN) {
+ /* Convert old I2C block commands to the new
+ convention. This preserves binary compatibility. */
+ data_arg.size = I2C_SMBUS_I2C_BLOCK_DATA;
+ if (data_arg.read_write == I2C_SMBUS_READ)
+ temp.block[0] = I2C_SMBUS_BLOCK_MAX;
+ }
res = i2c_smbus_xfer(client->adapter,client->addr,client->flags,
data_arg.read_write,
data_arg.command,data_arg.size,&temp);
device_timer.function = hd_times_out;
blk_queue_hardsect_size(hd_queue, 512);
-#ifdef __i386__
if (!NR_HD) {
- extern struct drive_info drive_info;
- unsigned char *BIOS = (unsigned char *) &drive_info;
- unsigned long flags;
- int cmos_disks;
-
- for (drive=0 ; drive<2 ; drive++) {
- hd_info[drive].cyl = *(unsigned short *) BIOS;
- hd_info[drive].head = *(2+BIOS);
- hd_info[drive].wpcom = *(unsigned short *) (5+BIOS);
- hd_info[drive].ctl = *(8+BIOS);
- hd_info[drive].lzone = *(unsigned short *) (12+BIOS);
- hd_info[drive].sect = *(14+BIOS);
-#ifdef does_not_work_for_everybody_with_scsi_but_helps_ibm_vp
- if (hd_info[drive].cyl && NR_HD == drive)
- NR_HD++;
-#endif
- BIOS += 16;
- }
-
- /*
- We query CMOS about hard disks : it could be that
- we have a SCSI/ESDI/etc controller that is BIOS
- compatible with ST-506, and thus showing up in our
- BIOS table, but not register compatible, and therefore
- not present in CMOS.
-
- Furthermore, we will assume that our ST-506 drives
- <if any> are the primary drives in the system, and
- the ones reflected as drive 1 or 2.
-
- The first drive is stored in the high nibble of CMOS
- byte 0x12, the second in the low nibble. This will be
- either a 4 bit drive type or 0xf indicating use byte 0x19
- for an 8 bit type, drive 1, 0x1a for drive 2 in CMOS.
-
- Needless to say, a non-zero value means we have
- an AT controller hard disk for that drive.
-
- Currently the rtc_lock is a bit academic since this
- driver is non-modular, but someday... ? Paul G.
- */
-
- spin_lock_irqsave(&rtc_lock, flags);
- cmos_disks = CMOS_READ(0x12);
- spin_unlock_irqrestore(&rtc_lock, flags);
-
- if (cmos_disks & 0xf0) {
- if (cmos_disks & 0x0f)
- NR_HD = 2;
- else
- NR_HD = 1;
- }
- }
-#endif /* __i386__ */
-#ifdef __arm__
- if (!NR_HD) {
- /* We don't know anything about the drive. This means
+ /*
+ * We don't know anything about the drive. This means
* that you *MUST* specify the drive parameters to the
* kernel yourself.
+ *
+ * If we were on an i386, we used to read this info from
+ * the BIOS or CMOS. This doesn't work all that well,
+ * since this assumes that this is a primary or secondary
+ * drive, and if we're using this legacy driver, it's
+ * probably an auxilliary controller added to recover
+ * legacy data off an ST-506 drive. Either way, it's
+ * definitely safest to have the user explicitly specify
+ * the information.
*/
printk("hd: no drives specified - use hd=cyl,head,sectors"
" on kernel command line\n");
- }
-#endif
- if (!NR_HD)
goto out;
+ }
for (drive=0 ; drive < NR_HD ; drive++) {
struct gendisk *disk = alloc_disk(64);
u8 tmpbyte;
struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
- pci_read_config_byte(dev, PCI_REVISION_ID, &m5229_revision);
+ m5229_revision = dev->revision;
isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
amd_print("Driver Version: 2.13");
amd_print("South Bridge: %s", pci_name(bmide_dev));
- pci_read_config_byte(dev, PCI_REVISION_ID, &t);
- amd_print("Revision: IDE %#x", t);
+ amd_print("Revision: IDE %#x", dev->revision);
amd_print("Highest DMA rate: UDMA%s", amd_dma[fls(amd_config->udma_mask) - 1]);
amd_print("BM-DMA base: %#lx", amd_base);
*/
if (amd_config->flags & AMD_CHECK_SWDMA) {
- pci_read_config_byte(dev, PCI_REVISION_ID, &t);
- if (t <= 7)
+ if (dev->revision <= 7)
amd_config->flags |= AMD_BAD_SWDMA;
}
pci_read_config_byte(dev, PCI_REVISION_ID, &t);
printk(KERN_INFO "%s: %s (rev %02x) UDMA%s controller\n",
- amd_chipset->name, pci_name(dev), t,
+ amd_chipset->name, pci_name(dev), dev->revision,
amd_dma[fls(amd_config->udma_mask) - 1]);
/*
u8 reg72 = 0, reg73 = 0; /* primary */
u8 reg7a = 0, reg7b = 0; /* secondary */
u8 reg50 = 1, reg51 = 1, reg57 = 0, reg71 = 0; /* extra */
- u8 rev = 0;
p += sprintf(p, "\nController: %d\n", index);
p += sprintf(p, "PCI-%x Chipset.\n", dev->device);
(void) pci_read_config_byte(dev, UDIDETCR1, ®7b);
/* PCI0643/6 originally didn't have the primary channel enable bit */
- (void) pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
if ((dev->device == PCI_DEVICE_ID_CMD_643) ||
- (dev->device == PCI_DEVICE_ID_CMD_646 && rev < 3))
+ (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 3))
reg51 |= CNTRL_ENA_1ST;
p += sprintf(p, "---------------- Primary Channel "
static int __devinit init_setup_cmd646(struct pci_dev *dev, ide_pci_device_t *d)
{
- u8 rev = 0;
-
/*
* The original PCI0646 didn't have the primary channel enable bit,
* it appeared starting with PCI0646U (i.e. revision ID 3).
*/
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- if (rev < 3)
+ if (dev->revision < 3)
d->enablebits[0].reg = 0;
return ide_setup_pci_device(dev, d);
*/
pci_set_master(cs5530_0);
- pci_set_mwi(cs5530_0);
+ pci_try_set_mwi(cs5530_0);
/*
* Set PCI CacheLineSize to 16-bytes:
static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
- u8 rev = 0, mcr1 = 0;
+ u8 mcr1 = 0;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- if (rev > 1) {
+ if (dev->revision > 1) {
d->name = "HPT371N";
info = &hpt371n;
static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
- u8 rev = 0;
-
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- if (rev > 1) {
+ if (dev->revision > 1) {
d->name = "HPT372N";
info = &hpt372n;
static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
{
struct hpt_info *info;
- u8 rev = 0;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
- if (rev > 1) {
+ if (dev->revision > 1) {
d->name = "HPT302N";
info = &hpt302n;
static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
struct pci_dev *dev2;
- u8 rev = 0;
+ u8 rev = dev->revision;
static char *chipset_names[] = { "HPT366", "HPT366", "HPT368",
"HPT370", "HPT370A", "HPT372",
"HPT372N" };
if (PCI_FUNC(dev->devfn) & 1)
return -ENODEV;
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
-
switch (rev) {
case 0:
case 1:
{
struct pci_dev *pdev = NULL;
u16 cfg;
- u8 rev;
while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
{
/* Look for 450NX PXB. Check for problem configurations
A PCI quirk checks bit 6 already */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
pci_read_config_word(pdev, 0x41, &cfg);
/* Only on the original revision: IDE DMA can hang */
- if(rev == 0x00)
+ if (pdev->revision == 0x00)
no_piix_dma = 1;
/* On all revisions below 5 PXB bus lock must be disabled for IDE */
- else if(cfg & (1<<14) && rev < 5)
+ else if (cfg & (1<<14) && pdev->revision < 5)
no_piix_dma = 2;
}
if(no_piix_dma)
NULL
};
-static u8 svwks_revision = 0;
static struct pci_dev *isa_dev;
static int check_in_drive_lists (ide_drive_t *drive, const char **list)
struct pci_dev *dev = HWIF(drive)->pci_dev;
u8 mask = 0;
- if (!svwks_revision)
- pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
-
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
return 0x1f;
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
return 0;
/* Check the OSB4 DMA33 enable bit */
return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0;
- } else if (svwks_revision < SVWKS_CSB5_REVISION_NEW) {
+ } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) {
return 0x07;
- } else if (svwks_revision >= SVWKS_CSB5_REVISION_NEW) {
+ } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) {
u8 btr = 0, mode;
pci_read_config_byte(dev, 0x5A, &btr);
mode = btr & 0x3;
unsigned int reg;
u8 btr;
- /* save revision id to determine DMA capability */
- pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
-
/* force Master Latency Timer value to 64 PCICLKs */
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
if (!(PCI_FUNC(dev->devfn) & 1))
btr |= 0x2;
else
- btr |= (svwks_revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
+ btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
pci_write_config_byte(dev, 0x5A, btr);
}
/* Setup HT1000 SouthBridge Controller - Single Channel Only */
/* Special case for SiS630 : 630S/ET is ATA_100a */
if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
- u8 hostrev;
- pci_read_config_byte(host, PCI_REVISION_ID, &hostrev);
- if (hostrev >= 0x30)
+ if (host->revision >= 0x30)
chipset_family = ATA_100a;
}
pci_dev_put(host);
u16 trueid;
u8 prefctl;
u8 idecfg;
- u8 sbrev;
pci_read_config_byte(dev, 0x4a, &idecfg);
pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
if (trueid == 0x5517) { /* SiS 961/961B */
lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
- pci_read_config_byte(lpc_bridge, PCI_REVISION_ID, &sbrev);
pci_read_config_byte(dev, 0x49, &prefctl);
pci_dev_put(lpc_bridge);
- if (sbrev == 0x10 && (prefctl & 0x80)) {
+ if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
printk(KERN_INFO "SIS5513: SiS 961B MuTIOL IDE UDMA133 controller\n");
chipset_family = ATA_133a;
} else {
static unsigned int sl82c105_bridge_revision(struct pci_dev *dev)
{
struct pci_dev *bridge;
- u8 rev;
/*
* The bridge should be part of the same device, but function 0.
/*
* We need to find function 0's revision, not function 1
*/
- pci_read_config_byte(bridge, PCI_REVISION_ID, &rev);
pci_dev_put(bridge);
- return rev;
+ return bridge->revision;
}
/*
static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
{
struct via_isa_bridge *via_config;
- u8 t;
for (via_config = via_isa_bridges; via_config->id; via_config++)
if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
!!(via_config->flags & VIA_BAD_ID),
via_config->id, NULL))) {
- pci_read_config_byte(*isa, PCI_REVISION_ID, &t);
- if (t >= via_config->rev_min &&
- t <= via_config->rev_max)
+ if ((*isa)->revision >= via_config->rev_min &&
+ (*isa)->revision <= via_config->rev_max)
break;
pci_dev_put(*isa);
}
* Print the boot message.
*/
- pci_read_config_byte(isa, PCI_REVISION_ID, &t);
printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %sDMA%s "
"controller on pci%s\n",
- via_config->name, t,
+ via_config->name, isa->revision,
via_config->udma_mask ? "U" : "MW",
via_dma[via_config->udma_mask ?
(fls(via_config->udma_mask) - 1) : 0],
element->attr.attr.name = element->name;
element->attr.attr.mode = S_IRUGO;
- element->attr.attr.owner = THIS_MODULE;
element->attr.show = show;
element->index = i;
struct ipath_devdata *dd;
unsigned long long addr;
u32 bar0 = 0, bar1 = 0;
- u8 rev;
dd = ipath_alloc_devdata(pdev);
if (IS_ERR(dd)) {
dd->ipath_deviceid = ent->device; /* save for later use */
dd->ipath_vendorid = ent->vendor;
- ret = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
- if (ret) {
- ipath_dev_err(dd, "Failed to read PCI revision ID unit "
- "%u: err %d\n", dd->ipath_unit, -ret);
- goto bail_regions; /* shouldn't ever happen */
- }
- dd->ipath_pcirev = rev;
+ dd->ipath_pcirev = pdev->revision;
#if defined(__powerpc__)
/* There isn't a generic way to specify writethrough mappings */
.attr = { \
.name = __stringify(_name), \
.mode = _mode, \
- .owner = THIS_MODULE, \
}, \
.show = psmouse_attr_show_helper, \
.store = psmouse_attr_set_helper, \
#ifdef CONFIG_PCI
struct IsdnCardState *cs = card->cs;
char tmp[64];
- u_char pci_rev_id;
u_int found = 0;
u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
}
#ifdef ATTEMPT_PCI_REMAPPING
/* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
- pci_read_config_byte(dev_a8, PCI_REVISION_ID, &pci_rev_id);
- if ((pci_ioaddr1 & 0x80) && (pci_rev_id == 1)) {
+ if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
printk(KERN_WARNING "HiSax: %s (%s): PLX rev 1, remapping required!\n",
CardType[card->typ],
sct_quadro_subtypes[cs->subtyp]);
list_add(&new_ct->link, &wf_controls);
new_ct->attr.attr.name = new_ct->name;
- new_ct->attr.attr.owner = THIS_MODULE;
new_ct->attr.attr.mode = 0644;
new_ct->attr.show = wf_show_control;
new_ct->attr.store = wf_store_control;
list_add(&new_sr->link, &wf_sensors);
new_sr->attr.attr.name = new_sr->name;
- new_sr->attr.attr.owner = THIS_MODULE;
new_sr->attr.attr.mode = 0444;
new_sr->attr.show = wf_show_sensor;
new_sr->attr.store = NULL;
.detach_client = wf_sat_detach,
};
-/*
- * XXX i2c_smbus_read_i2c_block_data doesn't pass the requested
- * length down to the low-level driver, so we use this, which
- * works well enough with the SMU i2c driver code...
- */
-static int sat_read_block(struct i2c_client *client, u8 command,
- u8 *values, int len)
-{
- union i2c_smbus_data data;
- int err;
-
- data.block[0] = len;
- err = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
- I2C_SMBUS_READ, command, I2C_SMBUS_I2C_BLOCK_DATA,
- &data);
- if (!err)
- memcpy(values, data.block, len);
- return err;
-}
-
struct smu_sdbp_header *smu_sat_get_sdb_partition(unsigned int sat_id, int id,
unsigned int *size)
{
return NULL;
for (i = 0; i < len; i += 4) {
- err = sat_read_block(&sat->i2c, 0xa, data, 4);
- if (err) {
+ err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0xa, 4, data);
+ if (err < 0) {
printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
err);
goto fail;
{
int err;
- err = sat_read_block(&sat->i2c, 0x3f, sat->cache, 16);
- if (err)
+ err = i2c_smbus_read_i2c_block_data(&sat->i2c, 0x3f, 16, sat->cache);
+ if (err < 0)
return err;
sat->last_read = jiffies;
#ifdef LOTSA_DEBUG
u32 iobase;
u32 length;
- u8 chiprev;
u16 model;
u32 current_frequency;
goto err_pci;
}
- pci_read_config_byte( pci_dev, PCI_REVISION_ID, &card->chiprev );
pci_read_config_word( pci_dev, PCI_SUBSYSTEM_ID, &card->model );
pci_set_drvdata( pci_dev, card );
gemtek_pci_mute( card );
printk( KERN_INFO "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
- card->chiprev, card->iobase, card->iobase + card->length - 1 );
+ pci_dev->revision, card->iobase, card->iobase + card->length - 1 );
return 0;
{
int ret = -EBUSY;
unsigned long mchip_adr;
- u8 revision;
if (meye.mchip_dev != NULL) {
printk(KERN_ERR "meye: only one device allowed!\n");
goto outreqirq;
}
- pci_read_config_byte(meye.mchip_dev, PCI_REVISION_ID, &revision);
pci_write_config_byte(meye.mchip_dev, PCI_CACHE_LINE_SIZE, 8);
pci_write_config_byte(meye.mchip_dev, PCI_LATENCY_TIMER, 64);
printk(KERN_INFO "meye: Motion Eye Camera Driver v%s.\n",
MEYE_DRIVER_VERSION);
printk(KERN_INFO "meye: mchip KL5A72002 rev. %d, base %lx, irq %d\n",
- revision, mchip_adr, meye.mchip_irq);
+ meye.mchip_dev->revision, mchip_adr, meye.mchip_irq);
return 0;
struct device_attribute dev_attr_##_name = { \
.attr = { \
.name = __stringify(_name), \
- .mode = 0, \
- .owner = THIS_MODULE }, \
+ .mode = 0 }, \
.show = NULL, \
.store = NULL, \
}
* msi-laptop.c - MSI S270 laptop support. This laptop is sold under
* various brands, including "Cytron/TCM/Medion/Tchibo MD96100".
*
+ * Driver also supports S271, S420 models.
+ *
* This driver exports a few files in /sys/devices/platform/msi-laptop-pf/:
*
* lcd_level - Screen brightness: contains a single integer in the
/* Initialization */
+static int dmi_check_cb(struct dmi_system_id *id)
+{
+ printk("msi-laptop: Identified laptop model '%s'.\n", id->ident);
+ return 0;
+}
+
static struct dmi_system_id __initdata msi_dmi_table[] = {
{
.ident = "MSI S270",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MICRO-STAR INT'L CO.,LTD"),
DMI_MATCH(DMI_PRODUCT_NAME, "MS-1013"),
- }
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0131"),
+ DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR INT'L CO.,LTD")
+ },
+ .callback = dmi_check_cb
+ },
+ {
+ .ident = "MSI S271",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MS-1058"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0581"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-1058")
+ },
+ .callback = dmi_check_cb
+ },
+ {
+ .ident = "MSI S420",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Micro-Star International"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "MS-1412"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "MSI"),
+ DMI_MATCH(DMI_BOARD_NAME, "MS-1412")
+ },
+ .callback = dmi_check_cb
},
{
.ident = "Medion MD96100",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "NOTEBOOK"),
DMI_MATCH(DMI_PRODUCT_NAME, "SAM2000"),
- }
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0131"),
+ DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR INT'L CO.,LTD")
+ },
+ .callback = dmi_check_cb
},
{ }
};
-
static int __init msi_init(void)
{
int ret;
MODULE_DESCRIPTION("MSI Laptop Support");
MODULE_VERSION(MSI_DRIVER_VERSION);
MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("dmi:*:svnMICRO-STARINT'LCO.,LTD:pnMS-1013:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
+MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1058:pvr0581:rvnMSI:rnMS-1058:*:ct10:*");
+MODULE_ALIAS("dmi:*:svnMicro-StarInternational:pnMS-1412:*:rvnMSI:rnMS-1412:*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
+MODULE_ALIAS("dmi:*:svnNOTEBOOK:pnSAM2000:pvr0131*:cvnMICRO-STARINT'LCO.,LTD:ct10:*");
if (skb != NULL) {
skb_reserve(skb, 2); /* 16 byte alignment */
skb_put(skb,totlen);
- eth_copy_and_sum(skb, (char *) p->base+(unsigned long) rbd->buffer,totlen,0);
+ skb_copy_to_linear_data(skb, (char *) p->base+(unsigned long) rbd->buffer,totlen);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
skb_reserve (skb, 2); /* 16 byte align */
skb_put (skb, len); /* make room */
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
(unsigned char *)&(ib->rx_buf [lp->rx_new][0]),
- len, 0);
+ len);
skb->protocol = eth_type_trans (skb, dev);
netif_rx (skb);
dev->last_rx = jiffies;
void __iomem *regs;
resource_size_t pciaddr;
unsigned int addr_len, i, pci_using_dac;
- u8 pci_rev;
#ifndef MODULE
static int version_printed;
printk("%s", version);
#endif
- pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
-
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
- pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev < 0x20) {
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision < 0x20) {
dev_err(&pdev->dev,
"This (id %04x:%04x rev %02x) is not an 8139C+ compatible chip\n",
- pdev->vendor, pdev->device, pci_rev);
+ pdev->vendor, pdev->device, pdev->revision);
dev_err(&pdev->dev, "Try the \"8139too\" driver instead.\n");
return -ENODEV;
}
int i, addr_len, option;
void __iomem *ioaddr;
static int board_idx = -1;
- u8 pci_rev;
assert (pdev != NULL);
assert (ent != NULL);
}
#endif
- pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
-
if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
- pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pci_rev >= 0x20) {
+ pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
dev_info(&pdev->dev,
"This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
- pdev->vendor, pdev->device, pci_rev);
+ pdev->vendor, pdev->device, pdev->revision);
dev_info(&pdev->dev,
"Use the \"8139cp\" driver for improved performance and stability.\n");
}
#if RX_BUF_IDX == 3
wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
#else
- eth_copy_and_sum (skb, &rx_ring[ring_offset + 4], pkt_size, 0);
+ skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
#endif
skb_put (skb, pkt_size);
# that for each of the symbols.
if NETDEVICES
+config NETDEVICES_MULTIQUEUE
+ bool "Netdevice multiple hardware queue support"
+ ---help---
+ Say Y here if you want to allow the network stack to use multiple
+ hardware TX queues on an ethernet device.
+
+ Most people will say N here.
+
config IFB
tristate "Intermediate Functional Block support"
depends on NET_CLS_ACT
config DM9000
tristate "DM9000 support"
- depends on ARM || MIPS
+ depends on ARM || BLACKFIN || MIPS
select CRC32
select MII
---help---
which can lead to bad results if the ATM peer loses state and
changes its encapsulation unilaterally.
+config PPPOL2TP
+ tristate "PPP over L2TP (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && PPP
+ help
+ Support for PPP-over-L2TP socket family. L2TP is a protocol
+ used by ISPs and enterprises to tunnel PPP traffic over UDP
+ tunnels. L2TP is replacing PPTP for VPN uses.
+
+ This kernel component handles only L2TP data packets: a
+ userland daemon handles L2TP the control protocol (tunnel
+ and session setup). One such daemon is OpenL2TP
+ (http://openl2tp.sourceforge.net/).
+
config SLIP
tristate "SLIP (serial line) support"
---help---
obj-$(CONFIG_PPP_BSDCOMP) += bsd_comp.o
obj-$(CONFIG_PPP_MPPE) += ppp_mppe.o
obj-$(CONFIG_PPPOE) += pppox.o pppoe.o
+obj-$(CONFIG_PPPOL2TP) += pppox.o pppol2tp.o
obj-$(CONFIG_SLIP) += slip.o
obj-$(CONFIG_SLHC) += slhc.o
skb_reserve (skb, 2); /* 16 byte align */
skb_put (skb, len); /* make room */
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
(unsigned char *)&(ib->rx_buf [lp->rx_new][0]),
- len, 0);
+ len);
skb->protocol = eth_type_trans (skb, dev);
netif_rx (skb);
dev->last_rx = jiffies;
skb_reserve(skb,2); /* 16 byte align */
skb_put(skb,pkt_len); /* Make room */
- eth_copy_and_sum(skb, (char *)priv->rx_buff[entry], pkt_len,0);
+ skb_copy_to_linear_data(skb, (char *)priv->rx_buff[entry], pkt_len);
skb->protocol=eth_type_trans(skb,dev);
#if 0
printk(KERN_DEBUG "RX pkt type 0x%04x from ",
skb_reserve(skb, 2);
dma_sync_single(NULL, ep->descs->rdesc[entry].buf_addr,
length, DMA_FROM_DEVICE);
- eth_copy_and_sum(skb, ep->rx_buf[entry], length, 0);
+ skb_copy_to_linear_data(skb, ep->rx_buf[entry], length);
skb_put(skb, length);
skb->protocol = eth_type_trans(skb, dev);
u16 phy_spd_default;
u16 dev_rev;
- u8 revision_id;
/* spi flash */
u8 flash_vendor;
{
struct atl1_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
- struct pci_dev *pdev = adapter->pdev;
-
- /* PCI config space info */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE;
hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE;
continue;
}
skb_reserve(skb, 2); /* 16 byte IP header align */
- eth_copy_and_sum(skb,
- (unsigned char *)pDB->vaddr, frmlen, 0);
+ skb_copy_to_linear_data(skb,
+ (unsigned char *)pDB->vaddr, frmlen);
skb_put(skb, frmlen);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb); /* pass the packet to upper layers */
#define BCM_VLAN 1
#endif
#include <net/ip.h>
-#include <net/tcp.h>
#include <net/checksum.h>
#include <linux/workqueue.h>
#include <linux/crc32.h>
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.5.11"
-#define DRV_MODULE_RELDATE "June 4, 2007"
+#define DRV_MODULE_VERSION "1.6.2"
+#define DRV_MODULE_RELDATE "July 6, 2007"
#define RUN_AT(x) (jiffies + (x))
{
u32 fw_link_status = 0;
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ return;
+
if (bp->link_up) {
u32 bmsr;
REG_WR_IND(bp, bp->shmem_base + BNX2_LINK_STATUS, fw_link_status);
}
+static char *
+bnx2_xceiver_str(struct bnx2 *bp)
+{
+ return ((bp->phy_port == PORT_FIBRE) ? "SerDes" :
+ ((bp->phy_flags & PHY_SERDES_FLAG) ? "Remote Copper" :
+ "Copper"));
+}
+
static void
bnx2_report_link(struct bnx2 *bp)
{
if (bp->link_up) {
netif_carrier_on(bp->dev);
- printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name);
+ printk(KERN_INFO PFX "%s NIC %s Link is Up, ", bp->dev->name,
+ bnx2_xceiver_str(bp));
printk("%d Mbps ", bp->line_speed);
}
else {
netif_carrier_off(bp->dev);
- printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name);
+ printk(KERN_ERR PFX "%s NIC %s Link is Down\n", bp->dev->name,
+ bnx2_xceiver_str(bp));
}
bnx2_report_fw_link(bp);
return 0;
}
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ return 0;
+
link_up = bp->link_up;
bnx2_enable_bmsr1(bp);
return adv;
}
+static int bnx2_fw_sync(struct bnx2 *, u32, int);
+
static int
-bnx2_setup_serdes_phy(struct bnx2 *bp)
+bnx2_setup_remote_phy(struct bnx2 *bp, u8 port)
+{
+ u32 speed_arg = 0, pause_adv;
+
+ pause_adv = bnx2_phy_get_pause_adv(bp);
+
+ if (bp->autoneg & AUTONEG_SPEED) {
+ speed_arg |= BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG;
+ if (bp->advertising & ADVERTISED_10baseT_Half)
+ speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_10HALF;
+ if (bp->advertising & ADVERTISED_10baseT_Full)
+ speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_10FULL;
+ if (bp->advertising & ADVERTISED_100baseT_Half)
+ speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_100HALF;
+ if (bp->advertising & ADVERTISED_100baseT_Full)
+ speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_100FULL;
+ if (bp->advertising & ADVERTISED_1000baseT_Full)
+ speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_1GFULL;
+ if (bp->advertising & ADVERTISED_2500baseX_Full)
+ speed_arg |= BNX2_NETLINK_SET_LINK_SPEED_2G5FULL;
+ } else {
+ if (bp->req_line_speed == SPEED_2500)
+ speed_arg = BNX2_NETLINK_SET_LINK_SPEED_2G5FULL;
+ else if (bp->req_line_speed == SPEED_1000)
+ speed_arg = BNX2_NETLINK_SET_LINK_SPEED_1GFULL;
+ else if (bp->req_line_speed == SPEED_100) {
+ if (bp->req_duplex == DUPLEX_FULL)
+ speed_arg = BNX2_NETLINK_SET_LINK_SPEED_100FULL;
+ else
+ speed_arg = BNX2_NETLINK_SET_LINK_SPEED_100HALF;
+ } else if (bp->req_line_speed == SPEED_10) {
+ if (bp->req_duplex == DUPLEX_FULL)
+ speed_arg = BNX2_NETLINK_SET_LINK_SPEED_10FULL;
+ else
+ speed_arg = BNX2_NETLINK_SET_LINK_SPEED_10HALF;
+ }
+ }
+
+ if (pause_adv & (ADVERTISE_1000XPAUSE | ADVERTISE_PAUSE_CAP))
+ speed_arg |= BNX2_NETLINK_SET_LINK_FC_SYM_PAUSE;
+ if (pause_adv & (ADVERTISE_1000XPSE_ASYM | ADVERTISE_1000XPSE_ASYM))
+ speed_arg |= BNX2_NETLINK_SET_LINK_FC_ASYM_PAUSE;
+
+ if (port == PORT_TP)
+ speed_arg |= BNX2_NETLINK_SET_LINK_PHY_APP_REMOTE |
+ BNX2_NETLINK_SET_LINK_ETH_AT_WIRESPEED;
+
+ REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_MB_ARG0, speed_arg);
+
+ spin_unlock_bh(&bp->phy_lock);
+ bnx2_fw_sync(bp, BNX2_DRV_MSG_CODE_CMD_SET_LINK, 0);
+ spin_lock_bh(&bp->phy_lock);
+
+ return 0;
+}
+
+static int
+bnx2_setup_serdes_phy(struct bnx2 *bp, u8 port)
{
u32 adv, bmcr;
u32 new_adv = 0;
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ return (bnx2_setup_remote_phy(bp, port));
+
if (!(bp->autoneg & AUTONEG_SPEED)) {
u32 new_bmcr;
int force_link_down = 0;
}
#define ETHTOOL_ALL_FIBRE_SPEED \
- (ADVERTISED_1000baseT_Full)
+ (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ? \
+ (ADVERTISED_2500baseX_Full | ADVERTISED_1000baseT_Full) :\
+ (ADVERTISED_1000baseT_Full)
#define ETHTOOL_ALL_COPPER_SPEED \
(ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
#define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL)
+static void
+bnx2_set_default_remote_link(struct bnx2 *bp)
+{
+ u32 link;
+
+ if (bp->phy_port == PORT_TP)
+ link = REG_RD_IND(bp, bp->shmem_base + BNX2_RPHY_COPPER_LINK);
+ else
+ link = REG_RD_IND(bp, bp->shmem_base + BNX2_RPHY_SERDES_LINK);
+
+ if (link & BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG) {
+ bp->req_line_speed = 0;
+ bp->autoneg |= AUTONEG_SPEED;
+ bp->advertising = ADVERTISED_Autoneg;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_10HALF)
+ bp->advertising |= ADVERTISED_10baseT_Half;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_10FULL)
+ bp->advertising |= ADVERTISED_10baseT_Full;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_100HALF)
+ bp->advertising |= ADVERTISED_100baseT_Half;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_100FULL)
+ bp->advertising |= ADVERTISED_100baseT_Full;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_1GFULL)
+ bp->advertising |= ADVERTISED_1000baseT_Full;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_2G5FULL)
+ bp->advertising |= ADVERTISED_2500baseX_Full;
+ } else {
+ bp->autoneg = 0;
+ bp->advertising = 0;
+ bp->req_duplex = DUPLEX_FULL;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_10) {
+ bp->req_line_speed = SPEED_10;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_10HALF)
+ bp->req_duplex = DUPLEX_HALF;
+ }
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_100) {
+ bp->req_line_speed = SPEED_100;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_100HALF)
+ bp->req_duplex = DUPLEX_HALF;
+ }
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_1GFULL)
+ bp->req_line_speed = SPEED_1000;
+ if (link & BNX2_NETLINK_SET_LINK_SPEED_2G5FULL)
+ bp->req_line_speed = SPEED_2500;
+ }
+}
+
+static void
+bnx2_set_default_link(struct bnx2 *bp)
+{
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ return bnx2_set_default_remote_link(bp);
+
+ bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL;
+ bp->req_line_speed = 0;
+ if (bp->phy_flags & PHY_SERDES_FLAG) {
+ u32 reg;
+
+ bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
+
+ reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
+ reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
+ if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
+ bp->autoneg = 0;
+ bp->req_line_speed = bp->line_speed = SPEED_1000;
+ bp->req_duplex = DUPLEX_FULL;
+ }
+ } else
+ bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
+}
+
+static void
+bnx2_send_heart_beat(struct bnx2 *bp)
+{
+ u32 msg;
+ u32 addr;
+
+ spin_lock(&bp->indirect_lock);
+ msg = (u32) (++bp->fw_drv_pulse_wr_seq & BNX2_DRV_PULSE_SEQ_MASK);
+ addr = bp->shmem_base + BNX2_DRV_PULSE_MB;
+ REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, addr);
+ REG_WR(bp, BNX2_PCICFG_REG_WINDOW, msg);
+ spin_unlock(&bp->indirect_lock);
+}
+
+static void
+bnx2_remote_phy_event(struct bnx2 *bp)
+{
+ u32 msg;
+ u8 link_up = bp->link_up;
+ u8 old_port;
+
+ msg = REG_RD_IND(bp, bp->shmem_base + BNX2_LINK_STATUS);
+
+ if (msg & BNX2_LINK_STATUS_HEART_BEAT_EXPIRED)
+ bnx2_send_heart_beat(bp);
+
+ msg &= ~BNX2_LINK_STATUS_HEART_BEAT_EXPIRED;
+
+ if ((msg & BNX2_LINK_STATUS_LINK_UP) == BNX2_LINK_STATUS_LINK_DOWN)
+ bp->link_up = 0;
+ else {
+ u32 speed;
+
+ bp->link_up = 1;
+ speed = msg & BNX2_LINK_STATUS_SPEED_MASK;
+ bp->duplex = DUPLEX_FULL;
+ switch (speed) {
+ case BNX2_LINK_STATUS_10HALF:
+ bp->duplex = DUPLEX_HALF;
+ case BNX2_LINK_STATUS_10FULL:
+ bp->line_speed = SPEED_10;
+ break;
+ case BNX2_LINK_STATUS_100HALF:
+ bp->duplex = DUPLEX_HALF;
+ case BNX2_LINK_STATUS_100BASE_T4:
+ case BNX2_LINK_STATUS_100FULL:
+ bp->line_speed = SPEED_100;
+ break;
+ case BNX2_LINK_STATUS_1000HALF:
+ bp->duplex = DUPLEX_HALF;
+ case BNX2_LINK_STATUS_1000FULL:
+ bp->line_speed = SPEED_1000;
+ break;
+ case BNX2_LINK_STATUS_2500HALF:
+ bp->duplex = DUPLEX_HALF;
+ case BNX2_LINK_STATUS_2500FULL:
+ bp->line_speed = SPEED_2500;
+ break;
+ default:
+ bp->line_speed = 0;
+ break;
+ }
+
+ spin_lock(&bp->phy_lock);
+ bp->flow_ctrl = 0;
+ if ((bp->autoneg & (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) !=
+ (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) {
+ if (bp->duplex == DUPLEX_FULL)
+ bp->flow_ctrl = bp->req_flow_ctrl;
+ } else {
+ if (msg & BNX2_LINK_STATUS_TX_FC_ENABLED)
+ bp->flow_ctrl |= FLOW_CTRL_TX;
+ if (msg & BNX2_LINK_STATUS_RX_FC_ENABLED)
+ bp->flow_ctrl |= FLOW_CTRL_RX;
+ }
+
+ old_port = bp->phy_port;
+ if (msg & BNX2_LINK_STATUS_SERDES_LINK)
+ bp->phy_port = PORT_FIBRE;
+ else
+ bp->phy_port = PORT_TP;
+
+ if (old_port != bp->phy_port)
+ bnx2_set_default_link(bp);
+
+ spin_unlock(&bp->phy_lock);
+ }
+ if (bp->link_up != link_up)
+ bnx2_report_link(bp);
+
+ bnx2_set_mac_link(bp);
+}
+
+static int
+bnx2_set_remote_link(struct bnx2 *bp)
+{
+ u32 evt_code;
+
+ evt_code = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_EVT_CODE_MB);
+ switch (evt_code) {
+ case BNX2_FW_EVT_CODE_LINK_EVENT:
+ bnx2_remote_phy_event(bp);
+ break;
+ case BNX2_FW_EVT_CODE_SW_TIMER_EXPIRATION_EVENT:
+ default:
+ bnx2_send_heart_beat(bp);
+ break;
+ }
+ return 0;
+}
+
static int
bnx2_setup_copper_phy(struct bnx2 *bp)
{
}
static int
-bnx2_setup_phy(struct bnx2 *bp)
+bnx2_setup_phy(struct bnx2 *bp, u8 port)
{
if (bp->loopback == MAC_LOOPBACK)
return 0;
if (bp->phy_flags & PHY_SERDES_FLAG) {
- return (bnx2_setup_serdes_phy(bp));
+ return (bnx2_setup_serdes_phy(bp, port));
}
else {
return (bnx2_setup_copper_phy(bp));
REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK);
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ goto setup_phy;
+
bnx2_read_phy(bp, MII_PHYSID1, &val);
bp->phy_id = val << 16;
bnx2_read_phy(bp, MII_PHYSID2, &val);
rc = bnx2_init_copper_phy(bp);
}
- bnx2_setup_phy(bp);
+setup_phy:
+ if (!rc)
+ rc = bnx2_setup_phy(bp, bp->phy_port);
return rc;
}
bnx2_set_link(bp);
spin_unlock(&bp->phy_lock);
}
+ if (bnx2_phy_event_is_set(bp, STATUS_ATTN_BITS_TIMER_ABORT))
+ bnx2_set_remote_link(bp);
+
}
static void
{
struct net_device *dev = dev_instance;
struct bnx2 *bp = netdev_priv(dev);
+ struct status_block *sblk = bp->status_blk;
/* When using INTx, it is possible for the interrupt to arrive
* at the CPU before the status block posted prior to the
* When using MSI, the MSI message will always complete after
* the status block write.
*/
- if ((bp->status_blk->status_idx == bp->last_status_idx) &&
+ if ((sblk->status_idx == bp->last_status_idx) &&
(REG_RD(bp, BNX2_PCICFG_MISC_STATUS) &
BNX2_PCICFG_MISC_STATUS_INTA_VALUE))
return IRQ_NONE;
BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
+ /* Read back to deassert IRQ immediately to avoid too many
+ * spurious interrupts.
+ */
+ REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD);
+
/* Return here if interrupt is shared and is disabled. */
if (unlikely(atomic_read(&bp->intr_sem) != 0))
return IRQ_HANDLED;
- netif_rx_schedule(dev);
+ if (netif_rx_schedule_prep(dev)) {
+ bp->last_status_idx = sblk->status_idx;
+ __netif_rx_schedule(dev);
+ }
return IRQ_HANDLED;
}
-#define STATUS_ATTN_EVENTS STATUS_ATTN_BITS_LINK_STATE
+#define STATUS_ATTN_EVENTS (STATUS_ATTN_BITS_LINK_STATE | \
+ STATUS_ATTN_BITS_TIMER_ABORT)
static inline int
bnx2_has_work(struct bnx2 *bp)
return rc;
}
+static void
+bnx2_init_remote_phy(struct bnx2 *bp)
+{
+ u32 val;
+
+ bp->phy_flags &= ~REMOTE_PHY_CAP_FLAG;
+ if (!(bp->phy_flags & PHY_SERDES_FLAG))
+ return;
+
+ val = REG_RD_IND(bp, bp->shmem_base + BNX2_FW_CAP_MB);
+ if ((val & BNX2_FW_CAP_SIGNATURE_MASK) != BNX2_FW_CAP_SIGNATURE)
+ return;
+
+ if (val & BNX2_FW_CAP_REMOTE_PHY_CAPABLE) {
+ if (netif_running(bp->dev)) {
+ val = BNX2_DRV_ACK_CAP_SIGNATURE |
+ BNX2_FW_CAP_REMOTE_PHY_CAPABLE;
+ REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_ACK_CAP_MB,
+ val);
+ }
+ bp->phy_flags |= REMOTE_PHY_CAP_FLAG;
+
+ val = REG_RD_IND(bp, bp->shmem_base + BNX2_LINK_STATUS);
+ if (val & BNX2_LINK_STATUS_SERDES_LINK)
+ bp->phy_port = PORT_FIBRE;
+ else
+ bp->phy_port = PORT_TP;
+ }
+}
+
static int
bnx2_reset_chip(struct bnx2 *bp, u32 reset_code)
{
if (rc)
return rc;
+ spin_lock_bh(&bp->phy_lock);
+ bnx2_init_remote_phy(bp);
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ bnx2_set_default_remote_link(bp);
+ spin_unlock_bh(&bp->phy_lock);
+
if (CHIP_ID(bp) == CHIP_ID_5706_A0) {
/* Adjust the voltage regular to two steps lower. The default
* of this register is 0x0000000e. */
rc = bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET,
0);
- REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff);
+ REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, BNX2_MISC_ENABLE_DEFAULT);
REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS);
udelay(20);
spin_lock_bh(&bp->phy_lock);
bnx2_init_phy(bp);
- spin_unlock_bh(&bp->phy_lock);
bnx2_set_link(bp);
+ spin_unlock_bh(&bp->phy_lock);
return 0;
}
static void
bnx2_5708_serdes_timer(struct bnx2 *bp)
{
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ return;
+
if ((bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) == 0) {
bp->serdes_an_pending = 0;
return;
bnx2_timer(unsigned long data)
{
struct bnx2 *bp = (struct bnx2 *) data;
- u32 msg;
if (!netif_running(bp->dev))
return;
if (atomic_read(&bp->intr_sem) != 0)
goto bnx2_restart_timer;
- msg = (u32) ++bp->fw_drv_pulse_wr_seq;
- REG_WR_IND(bp, bp->shmem_base + BNX2_DRV_PULSE_MB, msg);
+ bnx2_send_heart_beat(bp);
bp->stats_blk->stat_FwRxDrop = REG_RD_IND(bp, BNX2_FW_RX_DROP_COUNT);
bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
{
struct bnx2 *bp = netdev_priv(dev);
+ int support_serdes = 0, support_copper = 0;
cmd->supported = SUPPORTED_Autoneg;
- if (bp->phy_flags & PHY_SERDES_FLAG) {
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) {
+ support_serdes = 1;
+ support_copper = 1;
+ } else if (bp->phy_port == PORT_FIBRE)
+ support_serdes = 1;
+ else
+ support_copper = 1;
+
+ if (support_serdes) {
cmd->supported |= SUPPORTED_1000baseT_Full |
SUPPORTED_FIBRE;
if (bp->phy_flags & PHY_2_5G_CAPABLE_FLAG)
cmd->supported |= SUPPORTED_2500baseX_Full;
- cmd->port = PORT_FIBRE;
}
- else {
+ if (support_copper) {
cmd->supported |= SUPPORTED_10baseT_Half |
SUPPORTED_10baseT_Full |
SUPPORTED_100baseT_Half |
SUPPORTED_1000baseT_Full |
SUPPORTED_TP;
- cmd->port = PORT_TP;
}
+ spin_lock_bh(&bp->phy_lock);
+ cmd->port = bp->phy_port;
cmd->advertising = bp->advertising;
if (bp->autoneg & AUTONEG_SPEED) {
cmd->speed = -1;
cmd->duplex = -1;
}
+ spin_unlock_bh(&bp->phy_lock);
cmd->transceiver = XCVR_INTERNAL;
cmd->phy_address = bp->phy_addr;
u8 req_duplex = bp->req_duplex;
u16 req_line_speed = bp->req_line_speed;
u32 advertising = bp->advertising;
+ int err = -EINVAL;
+
+ spin_lock_bh(&bp->phy_lock);
+
+ if (cmd->port != PORT_TP && cmd->port != PORT_FIBRE)
+ goto err_out_unlock;
+
+ if (cmd->port != bp->phy_port && !(bp->phy_flags & REMOTE_PHY_CAP_FLAG))
+ goto err_out_unlock;
if (cmd->autoneg == AUTONEG_ENABLE) {
autoneg |= AUTONEG_SPEED;
(cmd->advertising == ADVERTISED_100baseT_Half) ||
(cmd->advertising == ADVERTISED_100baseT_Full)) {
- if (bp->phy_flags & PHY_SERDES_FLAG)
- return -EINVAL;
+ if (cmd->port == PORT_FIBRE)
+ goto err_out_unlock;
advertising = cmd->advertising;
} else if (cmd->advertising == ADVERTISED_2500baseX_Full) {
- if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
- return -EINVAL;
- } else if (cmd->advertising == ADVERTISED_1000baseT_Full) {
+ if (!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG) ||
+ (cmd->port == PORT_TP))
+ goto err_out_unlock;
+ } else if (cmd->advertising == ADVERTISED_1000baseT_Full)
advertising = cmd->advertising;
- }
- else if (cmd->advertising == ADVERTISED_1000baseT_Half) {
- return -EINVAL;
- }
+ else if (cmd->advertising == ADVERTISED_1000baseT_Half)
+ goto err_out_unlock;
else {
- if (bp->phy_flags & PHY_SERDES_FLAG) {
+ if (cmd->port == PORT_FIBRE)
advertising = ETHTOOL_ALL_FIBRE_SPEED;
- }
- else {
+ else
advertising = ETHTOOL_ALL_COPPER_SPEED;
- }
}
advertising |= ADVERTISED_Autoneg;
}
else {
- if (bp->phy_flags & PHY_SERDES_FLAG) {
+ if (cmd->port == PORT_FIBRE) {
if ((cmd->speed != SPEED_1000 &&
cmd->speed != SPEED_2500) ||
(cmd->duplex != DUPLEX_FULL))
- return -EINVAL;
+ goto err_out_unlock;
if (cmd->speed == SPEED_2500 &&
!(bp->phy_flags & PHY_2_5G_CAPABLE_FLAG))
- return -EINVAL;
- }
- else if (cmd->speed == SPEED_1000) {
- return -EINVAL;
+ goto err_out_unlock;
}
+ else if (cmd->speed == SPEED_1000 || cmd->speed == SPEED_2500)
+ goto err_out_unlock;
+
autoneg &= ~AUTONEG_SPEED;
req_line_speed = cmd->speed;
req_duplex = cmd->duplex;
bp->req_line_speed = req_line_speed;
bp->req_duplex = req_duplex;
- spin_lock_bh(&bp->phy_lock);
-
- bnx2_setup_phy(bp);
+ err = bnx2_setup_phy(bp, cmd->port);
+err_out_unlock:
spin_unlock_bh(&bp->phy_lock);
- return 0;
+ return err;
}
static void
strcpy(info->driver, DRV_MODULE_NAME);
strcpy(info->version, DRV_MODULE_VERSION);
strcpy(info->bus_info, pci_name(bp->pdev));
- info->fw_version[0] = ((bp->fw_ver & 0xff000000) >> 24) + '0';
- info->fw_version[2] = ((bp->fw_ver & 0xff0000) >> 16) + '0';
- info->fw_version[4] = ((bp->fw_ver & 0xff00) >> 8) + '0';
- info->fw_version[1] = info->fw_version[3] = '.';
- info->fw_version[5] = 0;
+ strcpy(info->fw_version, bp->fw_version);
}
#define BNX2_REGDUMP_LEN (32 * 1024)
spin_lock_bh(&bp->phy_lock);
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG) {
+ int rc;
+
+ rc = bnx2_setup_remote_phy(bp, bp->phy_port);
+ spin_unlock_bh(&bp->phy_lock);
+ return rc;
+ }
+
/* Force a link down visible on the other side */
if (bp->phy_flags & PHY_SERDES_FLAG) {
bnx2_write_phy(bp, bp->mii_bmcr, BMCR_LOOPBACK);
spin_lock_bh(&bp->phy_lock);
- bnx2_setup_phy(bp);
+ bnx2_setup_phy(bp, bp->phy_port);
spin_unlock_bh(&bp->phy_lock);
case SIOCGMIIREG: {
u32 mii_regval;
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ return -EOPNOTSUPP;
+
if (!netif_running(dev))
return -EAGAIN;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
+ if (bp->phy_flags & REMOTE_PHY_CAP_FLAG)
+ return -EOPNOTSUPP;
+
if (!netif_running(dev))
return -EAGAIN;
{
struct bnx2 *bp;
unsigned long mem_len;
- int rc;
+ int rc, i, j;
u32 reg;
u64 dma_mask, persist_dma_mask;
goto err_out_unmap;
}
- bp->fw_ver = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV);
+ reg = REG_RD_IND(bp, bp->shmem_base + BNX2_DEV_INFO_BC_REV);
+ for (i = 0, j = 0; i < 3; i++) {
+ u8 num, k, skip0;
+
+ num = (u8) (reg >> (24 - (i * 8)));
+ for (k = 100, skip0 = 1; k >= 1; num %= k, k /= 10) {
+ if (num >= k || !skip0 || k == 1) {
+ bp->fw_version[j++] = (num / k) + '0';
+ skip0 = 0;
+ }
+ }
+ if (i != 2)
+ bp->fw_version[j++] = '.';
+ }
+ reg = REG_RD_IND(bp, bp->shmem_base + BNX2_BC_STATE_CONDITION);
+ reg &= BNX2_CONDITION_MFW_RUN_MASK;
+ if (reg != BNX2_CONDITION_MFW_RUN_UNKNOWN &&
+ reg != BNX2_CONDITION_MFW_RUN_NONE) {
+ int i;
+ u32 addr = REG_RD_IND(bp, bp->shmem_base + BNX2_MFW_VER_PTR);
+
+ bp->fw_version[j++] = ' ';
+ for (i = 0; i < 3; i++) {
+ reg = REG_RD_IND(bp, addr + i * 4);
+ reg = swab32(reg);
+ memcpy(&bp->fw_version[j], ®, 4);
+ j += 4;
+ }
+ }
reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_MAC_UPPER);
bp->mac_addr[0] = (u8) (reg >> 8);
else if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT)
bp->phy_flags |= PHY_SERDES_FLAG;
+ bp->phy_port = PORT_TP;
if (bp->phy_flags & PHY_SERDES_FLAG) {
+ bp->phy_port = PORT_FIBRE;
bp->flags |= NO_WOL_FLAG;
if (CHIP_NUM(bp) != CHIP_NUM_5706) {
bp->phy_addr = 2;
if (reg & BNX2_SHARED_HW_CFG_PHY_2_5G)
bp->phy_flags |= PHY_2_5G_CAPABLE_FLAG;
}
+ bnx2_init_remote_phy(bp);
+
} else if (CHIP_NUM(bp) == CHIP_NUM_5706 ||
CHIP_NUM(bp) == CHIP_NUM_5708)
bp->phy_flags |= PHY_CRC_FIX_FLAG;
while ((amd_8132 = pci_get_device(PCI_VENDOR_ID_AMD,
PCI_DEVICE_ID_AMD_8132_BRIDGE,
amd_8132))) {
- u8 rev;
- pci_read_config_byte(amd_8132, PCI_REVISION_ID, &rev);
- if (rev >= 0x10 && rev <= 0x13) {
+ if (amd_8132->revision >= 0x10 &&
+ amd_8132->revision <= 0x13) {
disable_msi = 1;
pci_dev_put(amd_8132);
break;
}
}
- bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL;
- bp->req_line_speed = 0;
- if (bp->phy_flags & PHY_SERDES_FLAG) {
- bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
-
- reg = REG_RD_IND(bp, bp->shmem_base + BNX2_PORT_HW_CFG_CONFIG);
- reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
- if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
- bp->autoneg = 0;
- bp->req_line_speed = bp->line_speed = SPEED_1000;
- bp->req_duplex = DUPLEX_FULL;
- }
- }
- else {
- bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
- }
-
+ bnx2_set_default_link(bp);
bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX;
init_timer(&bp->timer);
memcpy(dev->perm_addr, bp->mac_addr, 6);
bp->name = board_info[ent->driver_data].name;
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
if (CHIP_NUM(bp) == CHIP_NUM_5709)
- dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
- else
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+ dev->features |= NETIF_F_IPV6_CSUM;
+
#ifdef BCM_VLAN
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
#endif
#define RX_COPY_THRESH 92
+#define BNX2_MISC_ENABLE_DEFAULT 0x7ffffff
+
#define DMA_READ_CHANS 5
#define DMA_WRITE_CHANS 3
#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100
#define PHY_INT_MODE_LINK_READY_FLAG 0x200
#define PHY_DIS_EARLY_DAC_FLAG 0x400
+#define REMOTE_PHY_CAP_FLAG 0x800
u32 mii_bmcr;
u32 mii_bmsr;
u16 req_line_speed;
u8 req_duplex;
+ u8 phy_port;
u8 link_up;
u16 line_speed;
u32 shmem_base;
- u32 fw_ver;
+ char fw_version[32];
int pm_cap;
int pcix_cap;
* the firmware has timed out, the driver will assume there is no firmware
* running and there won't be any firmware-driver synchronization during a
* driver reset. */
-#define FW_ACK_TIME_OUT_MS 100
+#define FW_ACK_TIME_OUT_MS 1000
#define BNX2_DRV_RESET_SIGNATURE 0x00000000
#define BNX2_DRV_MSG_CODE_DIAG 0x07000000
#define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000
#define BNX2_DRV_MSG_CODE_UNLOAD_LNK_DN 0x0b000000
+#define BNX2_DRV_MSG_CODE_CMD_SET_LINK 0x10000000
#define BNX2_DRV_MSG_DATA 0x00ff0000
#define BNX2_DRV_MSG_DATA_WAIT0 0x00010000
#define BNX2_LINK_STATUS_SERDES_LINK (1<<20)
#define BNX2_LINK_STATUS_PARTNER_AD_2500FULL (1<<21)
#define BNX2_LINK_STATUS_PARTNER_AD_2500HALF (1<<22)
+#define BNX2_LINK_STATUS_HEART_BEAT_EXPIRED (1<<31)
#define BNX2_DRV_PULSE_MB 0x00000010
#define BNX2_DRV_PULSE_SEQ_MASK 0x00007fff
* This is used for debugging. */
#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00080000
+#define BNX2_DRV_MB_ARG0 0x00000014
+#define BNX2_NETLINK_SET_LINK_SPEED_10HALF (1<<0)
+#define BNX2_NETLINK_SET_LINK_SPEED_10FULL (1<<1)
+#define BNX2_NETLINK_SET_LINK_SPEED_10 \
+ (BNX2_NETLINK_SET_LINK_SPEED_10HALF | \
+ BNX2_NETLINK_SET_LINK_SPEED_10FULL)
+#define BNX2_NETLINK_SET_LINK_SPEED_100HALF (1<<2)
+#define BNX2_NETLINK_SET_LINK_SPEED_100FULL (1<<3)
+#define BNX2_NETLINK_SET_LINK_SPEED_100 \
+ (BNX2_NETLINK_SET_LINK_SPEED_100HALF | \
+ BNX2_NETLINK_SET_LINK_SPEED_100FULL)
+#define BNX2_NETLINK_SET_LINK_SPEED_1GHALF (1<<4)
+#define BNX2_NETLINK_SET_LINK_SPEED_1GFULL (1<<5)
+#define BNX2_NETLINK_SET_LINK_SPEED_2G5HALF (1<<6)
+#define BNX2_NETLINK_SET_LINK_SPEED_2G5FULL (1<<7)
+#define BNX2_NETLINK_SET_LINK_SPEED_10GHALF (1<<8)
+#define BNX2_NETLINK_SET_LINK_SPEED_10GFULL (1<<9)
+#define BNX2_NETLINK_SET_LINK_ENABLE_AUTONEG (1<<10)
+#define BNX2_NETLINK_SET_LINK_PHY_APP_REMOTE (1<<11)
+#define BNX2_NETLINK_SET_LINK_FC_SYM_PAUSE (1<<12)
+#define BNX2_NETLINK_SET_LINK_FC_ASYM_PAUSE (1<<13)
+#define BNX2_NETLINK_SET_LINK_ETH_AT_WIRESPEED (1<<14)
+#define BNX2_NETLINK_SET_LINK_PHY_RESET (1<<15)
+
#define BNX2_DEV_INFO_SIGNATURE 0x00000020
#define BNX2_DEV_INFO_SIGNATURE_MAGIC 0x44564900
#define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK 0xffffff00
#define BNX2_PORT_FEATURE_MBA_VLAN_TAG_MASK 0xffff
#define BNX2_PORT_FEATURE_MBA_VLAN_ENABLE 0x10000
+#define BNX2_MFW_VER_PTR 0x00000014c
+
#define BNX2_BC_STATE_RESET_TYPE 0x000001c0
#define BNX2_BC_STATE_RESET_TYPE_SIG 0x00005254
#define BNX2_BC_STATE_RESET_TYPE_SIG_MASK 0x0000ffff
#define BNX2_BC_STATE_ERR_NO_RXP (BNX2_BC_STATE_SIGN | 0x0600)
#define BNX2_BC_STATE_ERR_TOO_MANY_RBUF (BNX2_BC_STATE_SIGN | 0x0700)
+#define BNX2_BC_STATE_CONDITION 0x000001c8
+#define BNX2_CONDITION_MFW_RUN_UNKNOWN 0x00000000
+#define BNX2_CONDITION_MFW_RUN_IPMI 0x00002000
+#define BNX2_CONDITION_MFW_RUN_UMP 0x00004000
+#define BNX2_CONDITION_MFW_RUN_NCSI 0x00006000
+#define BNX2_CONDITION_MFW_RUN_NONE 0x0000e000
+#define BNX2_CONDITION_MFW_RUN_MASK 0x0000e000
+
#define BNX2_BC_STATE_DEBUG_CMD 0x1dc
#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000
#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE_MASK 0xffff0000
#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK 0xffff
#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE 0xffff
+#define BNX2_FW_EVT_CODE_MB 0x354
+#define BNX2_FW_EVT_CODE_SW_TIMER_EXPIRATION_EVENT 0x00000000
+#define BNX2_FW_EVT_CODE_LINK_EVENT 0x00000001
+
+#define BNX2_DRV_ACK_CAP_MB 0x364
+#define BNX2_DRV_ACK_CAP_SIGNATURE 0x35450000
+#define BNX2_CAPABILITY_SIGNATURE_MASK 0xFFFF0000
+
+#define BNX2_FW_CAP_MB 0x368
+#define BNX2_FW_CAP_SIGNATURE 0xaa550000
+#define BNX2_FW_ACK_DRV_SIGNATURE 0x52500000
+#define BNX2_FW_CAP_SIGNATURE_MASK 0xffff0000
+#define BNX2_FW_CAP_REMOTE_PHY_CAPABLE 0x00000001
+#define BNX2_FW_CAP_REMOTE_PHY_PRESENT 0x00000002
+
+#define BNX2_RPHY_SIGNATURE 0x36c
+#define BNX2_RPHY_LOAD_SIGNATURE 0x5a5a5a5a
+
+#define BNX2_RPHY_FLAGS 0x370
+#define BNX2_RPHY_SERDES_LINK 0x374
+#define BNX2_RPHY_COPPER_LINK 0x378
+
#define HOST_VIEW_SHMEM_BASE 0x167c00
#endif
static void cas_check_pci_invariants(struct cas *cp)
{
struct pci_dev *pdev = cp->pdev;
- u8 rev;
cp->cas_flags = 0;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
if ((pdev->vendor == PCI_VENDOR_ID_SUN) &&
(pdev->device == PCI_DEVICE_ID_SUN_CASSINI)) {
- if (rev >= CAS_ID_REVPLUS)
+ if (pdev->revision >= CAS_ID_REVPLUS)
cp->cas_flags |= CAS_FLAG_REG_PLUS;
- if (rev < CAS_ID_REVPLUS02u)
+ if (pdev->revision < CAS_ID_REVPLUS02u)
cp->cas_flags |= CAS_FLAG_TARGET_ABORT;
/* Original Cassini supports HW CSUM, but it's not
* enabled by default as it can trigger TX hangs.
*/
- if (rev < CAS_ID_REV2)
+ if (pdev->revision < CAS_ID_REV2)
cp->cas_flags |= CAS_FLAG_NO_HW_CSUM;
} else {
/* Only sun has original cassini chips. */
pci_cmd &= ~PCI_COMMAND_SERR;
pci_cmd |= PCI_COMMAND_PARITY;
pci_write_config_word(pdev, PCI_COMMAND, pci_cmd);
- if (pci_set_mwi(pdev))
+ if (pci_try_set_mwi(pdev))
printk(KERN_WARNING PFX "Could not enable MWI for %s\n",
pci_name(pdev));
/*
* On some architectures, the default cache line size set
- * by pci_set_mwi reduces perforamnce. We have to increase
+ * by pci_try_set_mwi reduces perforamnce. We have to increase
* it for this case. To start, we'll print some configuration
* data.
*/
np->an_enable = 1;
mii_set_media (dev);
}
- pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
err = register_netdev (dev);
if (err)
PCI_DMA_FROMDEVICE);
/* 16 byte align the IP header */
skb_reserve (skb, 2);
- eth_copy_and_sum (skb,
+ skb_copy_to_linear_data (skb,
np->rx_skbuff[entry]->data,
- pkt_len, 0);
+ pkt_len);
skb_put (skb, pkt_len);
pci_dma_sync_single_for_device(np->pdev,
desc->fraginfo &
skb->protocol = eth_type_trans (skb, dev);
#if 0
/* Checksum done by hw, but csum value unavailable. */
- if (np->pci_rev_id >= 0x0c &&
+ if (np->pdev->pci_rev_id >= 0x0c &&
!(frame_status & (TCPError | UDPError | IPError))) {
skb->ip_summed = CHECKSUM_UNNECESSARY;
}
unsigned int rx_flow:1; /* Rx flow control enable */
unsigned int phy_media:1; /* 1: fiber, 0: copper */
unsigned int link_status:1; /* Current link status */
- unsigned char pci_rev_id; /* PCI revision ID */
struct netdev_desc *last_tx; /* Last Tx descriptor used. */
unsigned long cur_rx, old_rx; /* Producer/consumer ring indices */
unsigned long cur_tx, old_tx;
#define PRINTK(args...) printk(KERN_DEBUG args)
#endif
+#ifdef CONFIG_BLACKFIN
+#define readsb insb
+#define readsw insw
+#define readsl insl
+#define writesb outsb
+#define writesw outsw
+#define writesl outsl
+#define DM9000_IRQ_FLAGS (IRQF_SHARED | IRQF_TRIGGER_HIGH)
+#else
+#define DM9000_IRQ_FLAGS IRQF_SHARED
+#endif
+
/*
* Transmit timeout, default 5 seconds.
*/
db->io_addr = (void __iomem *)base;
db->io_data = (void __iomem *)(base + 4);
+ /* ensure at least we have a default set of IO routines */
+ dm9000_set_io(db, 2);
+
} else {
db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
PRINTK2("entering dm9000_open\n");
- if (request_irq(dev->irq, &dm9000_interrupt, IRQF_SHARED, dev->name, dev))
+ if (request_irq(dev->irq, &dm9000_interrupt, DM9000_IRQ_FLAGS, dev->name, dev))
return -EAGAIN;
/* Initialize DM9000 board */
#include <linux/etherdevice.h>
#include <linux/init.h>
#include <linux/moduleparam.h>
+#include <linux/rtnetlink.h>
+#include <net/rtnetlink.h>
static int numdummies = 1;
static int dummy_xmit(struct sk_buff *skb, struct net_device *dev);
-static struct net_device_stats *dummy_get_stats(struct net_device *dev);
static int dummy_set_address(struct net_device *dev, void *p)
{
{
}
-static void __init dummy_setup(struct net_device *dev)
+static void dummy_setup(struct net_device *dev)
{
/* Initialize the device structure. */
- dev->get_stats = dummy_get_stats;
dev->hard_start_xmit = dummy_xmit;
dev->set_multicast_list = set_multicast_list;
dev->set_mac_address = dummy_set_address;
+ dev->destructor = free_netdev;
/* Fill in device structure with ethernet-generic values. */
ether_setup(dev);
static int dummy_xmit(struct sk_buff *skb, struct net_device *dev)
{
- struct net_device_stats *stats = netdev_priv(dev);
-
- stats->tx_packets++;
- stats->tx_bytes+=skb->len;
+ dev->stats.tx_packets++;
+ dev->stats.tx_bytes += skb->len;
dev_kfree_skb(skb);
return 0;
}
-static struct net_device_stats *dummy_get_stats(struct net_device *dev)
+static int dummy_validate(struct nlattr *tb[], struct nlattr *data[])
{
- return netdev_priv(dev);
+ if (tb[IFLA_ADDRESS]) {
+ if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
+ return -EINVAL;
+ if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
+ return -EADDRNOTAVAIL;
+ }
+ return 0;
}
-static struct net_device **dummies;
+static struct rtnl_link_ops dummy_link_ops __read_mostly = {
+ .kind = "dummy",
+ .setup = dummy_setup,
+ .validate = dummy_validate,
+};
/* Number of dummy devices to be set up by this module. */
module_param(numdummies, int, 0);
MODULE_PARM_DESC(numdummies, "Number of dummy pseudo devices");
-static int __init dummy_init_one(int index)
+static int __init dummy_init_one(void)
{
struct net_device *dev_dummy;
int err;
- dev_dummy = alloc_netdev(sizeof(struct net_device_stats),
- "dummy%d", dummy_setup);
-
+ dev_dummy = alloc_netdev(0, "dummy%d", dummy_setup);
if (!dev_dummy)
return -ENOMEM;
- if ((err = register_netdev(dev_dummy))) {
- free_netdev(dev_dummy);
- dev_dummy = NULL;
- } else {
- dummies[index] = dev_dummy;
- }
+ err = dev_alloc_name(dev_dummy, dev_dummy->name);
+ if (err < 0)
+ goto err;
- return err;
-}
+ dev_dummy->rtnl_link_ops = &dummy_link_ops;
+ err = register_netdevice(dev_dummy);
+ if (err < 0)
+ goto err;
+ return 0;
-static void dummy_free_one(int index)
-{
- unregister_netdev(dummies[index]);
- free_netdev(dummies[index]);
+err:
+ free_netdev(dev_dummy);
+ return err;
}
static int __init dummy_init_module(void)
{
int i, err = 0;
- dummies = kmalloc(numdummies * sizeof(void *), GFP_KERNEL);
- if (!dummies)
- return -ENOMEM;
+
+ rtnl_lock();
+ err = __rtnl_link_register(&dummy_link_ops);
+
for (i = 0; i < numdummies && !err; i++)
- err = dummy_init_one(i);
- if (err) {
- i--;
- while (--i >= 0)
- dummy_free_one(i);
- }
+ err = dummy_init_one();
+ if (err < 0)
+ __rtnl_link_unregister(&dummy_link_ops);
+ rtnl_unlock();
+
return err;
}
static void __exit dummy_cleanup_module(void)
{
- int i;
- for (i = 0; i < numdummies; i++)
- dummy_free_one(i);
- kfree(dummies);
+ rtnl_link_unregister(&dummy_link_ops);
}
module_init(dummy_init_module);
module_exit(dummy_cleanup_module);
MODULE_LICENSE("GPL");
+MODULE_ALIAS_RTNL_LINK("dummy");
u32 rx_tco_frames;
u32 rx_over_length_errors;
- u8 rev_id;
u16 leds;
u16 eeprom_wc;
u16 eeprom[256];
struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
struct param_range cbs = { .min = 64, .max = 256, .count = 128 };
- pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
- nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->rev_id;
+ nic->mac = (nic->flags & ich) ? mac_82559_D101M : nic->pdev->revision;
if(nic->mac == mac_unknown)
nic->mac = mac_82557_D100_A;
if (nic->flags & ich)
goto noloaducode;
- /* Search for ucode match against h/w rev_id */
+ /* Search for ucode match against h/w revision */
for (opts = ucode_opts; opts->mac; opts++) {
int i;
u32 *ucode = opts->ucode;
u32 *buff = p;
int i;
- regs->version = (1 << 24) | nic->rev_id;
+ regs->version = (1 << 24) | nic->pdev->revision;
buff[0] = ioread8(&nic->csr->scb.cmd_hi) << 24 |
ioread8(&nic->csr->scb.cmd_lo) << 16 |
ioread16(&nic->csr->scb.status);
hw->device_id = pdev->device;
hw->subsystem_vendor_id = pdev->subsystem_vendor;
hw->subsystem_id = pdev->subsystem_device;
-
- pci_read_config_byte(pdev, PCI_REVISION_ID, &hw->revision_id);
+ hw->revision_id = pdev->revision;
pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word);
#if 1 || USE_IP_CSUM
/* Packet is in one chunk -- we can copy + cksum. */
- eth_copy_and_sum(skb, sp->rx_skbuff[entry]->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb, sp->rx_skbuff[entry]->data, pkt_len);
skb_put(skb, pkt_len);
#else
skb_copy_from_linear_data(sp->rx_skbuff[entry],
ep->rx_ring[entry].bufaddr,
ep->rx_buf_sz,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb, ep->rx_skbuff[entry]->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb, ep->rx_skbuff[entry]->data, pkt_len);
skb_put(skb, pkt_len);
pci_dma_sync_single_for_device(ep->pci_dev,
ep->rx_ring[entry].bufaddr,
/* Call copy + cksum if available. */
#if ! defined(__alpha__)
- eth_copy_and_sum(skb,
- np->cur_rx->skbuff->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb,
+ np->cur_rx->skbuff->data, pkt_len);
skb_put(skb, pkt_len);
#else
memcpy(skb_put(skb, pkt_len),
fep->stats.rx_dropped++;
} else {
skb_put(skb,pkt_len-4); /* Make room */
- eth_copy_and_sum(skb, data, pkt_len-4, 0);
+ skb_copy_to_linear_data(skb, data, pkt_len-4);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
}
np->wolenabled = 0;
if (id->driver_data & DEV_HAS_POWER_CNTRL) {
- u8 revision_id;
- pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id);
/* take phy and nic out of low power mode */
powerstate = readl(base + NvRegPowerState2);
powerstate &= ~NVREG_POWERSTATE2_POWERUP_MASK;
if ((id->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
id->device == PCI_DEVICE_ID_NVIDIA_NVENET_13) &&
- revision_id >= 0xA3)
+ pci_dev->revision >= 0xA3)
powerstate |= NVREG_POWERSTATE2_POWERUP_REV_A3;
writel(powerstate, base + NvRegPowerState2);
}
PCI_DMA_FROMDEVICE);
/* Call copy + cksum if available. */
#if 1 || USE_IP_COPYSUM
- eth_copy_and_sum(skb,
- hmp->rx_skbuff[entry]->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb,
+ hmp->rx_skbuff[entry]->data, pkt_len);
skb_put(skb, pkt_len);
#else
memcpy(skb_put(skb, pkt_len), hmp->rx_ring_dma
#define ATTR(_name, _mode) \
struct attribute veth_##_name##_attr = { \
- .name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE \
+ .name = __stringify(_name), .mode = _mode, \
};
static ATTR(active, 0644);
}
-static void __init ifb_setup(struct net_device *dev)
+static void ifb_setup(struct net_device *dev)
{
/* Initialize the device structure. */
dev->get_stats = ifb_get_stats;
dev->hard_start_xmit = ifb_xmit;
dev->open = &ifb_open;
dev->stop = &ifb_close;
+ dev->destructor = free_netdev;
/* Fill in device structure with ethernet-generic values. */
ether_setup(dev);
return stats;
}
-static struct net_device **ifbs;
-
-/* Number of ifb devices to be set up by this module. */
-module_param(numifbs, int, 0);
-MODULE_PARM_DESC(numifbs, "Number of ifb devices");
-
static int ifb_close(struct net_device *dev)
{
struct ifb_private *dp = netdev_priv(dev);
return 0;
}
+static int ifb_validate(struct nlattr *tb[], struct nlattr *data[])
+{
+ if (tb[IFLA_ADDRESS]) {
+ if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
+ return -EINVAL;
+ if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
+ return -EADDRNOTAVAIL;
+ }
+ return 0;
+}
+
+static struct rtnl_link_ops ifb_link_ops __read_mostly = {
+ .kind = "ifb",
+ .priv_size = sizeof(struct ifb_private),
+ .setup = ifb_setup,
+ .validate = ifb_validate,
+};
+
+/* Number of ifb devices to be set up by this module. */
+module_param(numifbs, int, 0);
+MODULE_PARM_DESC(numifbs, "Number of ifb devices");
+
static int __init ifb_init_one(int index)
{
struct net_device *dev_ifb;
if (!dev_ifb)
return -ENOMEM;
- if ((err = register_netdev(dev_ifb))) {
- free_netdev(dev_ifb);
- dev_ifb = NULL;
- } else {
- ifbs[index] = dev_ifb;
- }
+ err = dev_alloc_name(dev_ifb, dev_ifb->name);
+ if (err < 0)
+ goto err;
- return err;
-}
+ dev_ifb->rtnl_link_ops = &ifb_link_ops;
+ err = register_netdevice(dev_ifb);
+ if (err < 0)
+ goto err;
+ return 0;
-static void ifb_free_one(int index)
-{
- unregister_netdev(ifbs[index]);
- free_netdev(ifbs[index]);
+err:
+ free_netdev(dev_ifb);
+ return err;
}
static int __init ifb_init_module(void)
{
- int i, err = 0;
- ifbs = kmalloc(numifbs * sizeof(void *), GFP_KERNEL);
- if (!ifbs)
- return -ENOMEM;
+ int i, err;
+
+ rtnl_lock();
+ err = __rtnl_link_register(&ifb_link_ops);
+
for (i = 0; i < numifbs && !err; i++)
err = ifb_init_one(i);
- if (err) {
- i--;
- while (--i >= 0)
- ifb_free_one(i);
- }
+ if (err)
+ __rtnl_link_unregister(&ifb_link_ops);
+ rtnl_unlock();
return err;
}
static void __exit ifb_cleanup_module(void)
{
- int i;
-
- for (i = 0; i < numifbs; i++)
- ifb_free_one(i);
- kfree(ifbs);
+ rtnl_link_unregister(&ifb_link_ops);
}
module_init(ifb_init_module);
module_exit(ifb_cleanup_module);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jamal Hadi Salim");
+MODULE_ALIAS_RTNL_LINK("ifb");
* Version: 0.1.1
* Description: Irda KingSun/DonShine USB Dongle
* Status: Experimental
-* Author: Alex Villac
�s Lasso <a_villacis@palosanto.com>
+* Author: Alex Villac
ís Lasso <a_villacis@palosanto.com>
*
* Based on stir4200 and mcs7780 drivers, with (strange?) differences
*
}
module_exit(kingsun_cleanup);
-MODULE_AUTHOR("Alex Villac
�s Lasso <a_villacis@palosanto.com>");
+MODULE_AUTHOR("Alex Villac
ís Lasso <a_villacis@palosanto.com>");
MODULE_DESCRIPTION("IrDA-USB Dongle Driver for KingSun/DonShine");
MODULE_LICENSE("GPL");
#include <linux/time.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/mutex.h>
#include <asm/uaccess.h>
#include <asm/byteorder.h>
idev = ndev->priv;
spin_lock_init(&idev->lock);
- init_MUTEX(&idev->sem);
- down(&idev->sem);
+ mutex_init(&idev->mtx);
+ mutex_lock(&idev->mtx);
idev->pdev = pdev;
if (vlsi_irda_init(ndev) < 0)
IRDA_MESSAGE("%s: registered device %s\n", drivername, ndev->name);
pci_set_drvdata(pdev, ndev);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
out_freedev:
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
free_netdev(ndev);
out_disable:
pci_disable_device(pdev);
unregister_netdev(ndev);
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (idev->proc_entry) {
remove_proc_entry(ndev->name, vlsi_proc_root);
idev->proc_entry = NULL;
}
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
free_netdev(ndev);
return 0;
}
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (pdev->current_state != 0) { /* already suspended */
if (state.event > pdev->current_state) { /* simply go deeper */
pci_set_power_state(pdev, pci_choose_state(pdev, state));
}
else
IRDA_ERROR("%s - %s: invalid suspend request %u -> %u\n", __FUNCTION__, pci_name(pdev), pdev->current_state, state.event);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
pci_set_power_state(pdev, pci_choose_state(pdev, state));
pdev->current_state = state.event;
idev->resume_ok = 1;
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
return 0;
}
idev = ndev->priv;
- down(&idev->sem);
+ mutex_lock(&idev->mtx);
if (pdev->current_state == 0) {
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
IRDA_WARNING("%s - %s: already resumed\n",
__FUNCTION__, pci_name(pdev));
return 0;
* device and independently resume_ok should catch any garbage config.
*/
IRDA_WARNING("%s - hm, nothing to resume?\n", __FUNCTION__);
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
netif_device_attach(ndev);
}
idev->resume_ok = 0;
- up(&idev->sem);
+ mutex_unlock(&idev->mtx);
return 0;
}
struct timeval last_rx;
spinlock_t lock;
- struct semaphore sem;
+ struct mutex mtx;
u8 resume_ok;
struct proc_dir_entry *proc_entry;
skb = dev_alloc_skb(desc->pkt_length + 2);
if (likely(skb != NULL)) {
skb_reserve(skb, 2);
- eth_copy_and_sum(skb, buf, desc->pkt_length, 0);
+ skb_copy_to_linear_data(skb, buf, desc->pkt_length);
skb_put(skb, desc->pkt_length);
skb->protocol = eth_type_trans(skb, nds[desc->channel]);
}
skb_reserve(skb,2); /* 16 byte align */
skb_put(skb,pkt_len); /* Make room */
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
(unsigned char *)isa_bus_to_virt((lp->rx_ring[entry].base & 0x00ffffff)),
- pkt_len,0);
+ pkt_len);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
dev->last_rx = jiffies;
np->rx_dma[entry],
buflen,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb,
- np->rx_skbuff[entry]->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb,
+ np->rx_skbuff[entry]->data, pkt_len);
skb_put(skb, pkt_len);
pci_dma_sync_single_for_device(np->pci_dev,
np->rx_dma[entry],
#define NETXEN_ADAPTER_UP_MAGIC 777
#define NETXEN_NIC_PEG_TUNE 0
-u8 nx_p2_id = NX_P2_C0;
-
#define DMA_32BIT_MASK 0x00000000ffffffffULL
#define DMA_35BIT_MASK 0x00000007ffffffffULL
goto err_out_disable_pdev;
pci_set_master(pdev);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &nx_p2_id);
- if (nx_p2_id == NX_P2_C1 &&
+ if (pdev->revision == NX_P2_C1 &&
(pci_set_dma_mask(pdev, DMA_35BIT_MASK) == 0) &&
(pci_set_consistent_dma_mask(pdev, DMA_35BIT_MASK) == 0)) {
pci_using_dac = 1;
INIT_WORK(&adapter->watchdog_task, netxen_watchdog_task);
adapter->ahw.pdev = pdev;
adapter->proc_cmd_buf_counter = 0;
- adapter->ahw.revision_id = nx_p2_id;
+ adapter->ahw.revision_id = pdev->revision;
/* make sure Window == 1 */
netxen_nic_pci_change_crbwindow(adapter, 1);
{
skb_reserve(skb,2);
skb_put(skb,totlen);
- eth_copy_and_sum(skb,(char *) p->base+(unsigned long) rbd->buffer,totlen,0);
+ skb_copy_to_linear_data(skb,(char *) p->base+(unsigned long) rbd->buffer,totlen);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
dev->last_rx = jiffies;
#ifdef RCV_VIA_SKB
if( (unsigned long) (skb->data + R_BUF_SIZE) > 0x1000000) {
skb_put(skb,len);
- eth_copy_and_sum(skb, (unsigned char *)(p->recv_skb[p->rmdnum]->data),len,0);
+ skb_copy_to_linear_data(skb, (unsigned char *)(p->recv_skb[p->rmdnum]->data),len);
}
else {
struct sk_buff *skb1 = p->recv_skb[p->rmdnum];
}
#else
skb_put(skb,len);
- eth_copy_and_sum(skb, (unsigned char *) p->recvbounce[p->rmdnum],len,0);
+ skb_copy_to_linear_data(skb, (unsigned char *) p->recvbounce[p->rmdnum],len);
#endif
p->stats.rx_packets++;
p->stats.rx_bytes += len;
if (skb) {
skb_reserve (skb, 2); /* 16 byte align the IP fields. */
- eth_copy_and_sum (skb, &rx_ring[ring_offset + 4], pkt_size, 0);
+ skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
skb_put (skb, pkt_size);
skb->protocol = eth_type_trans (skb, dev);
lp->rx_dma_addr[entry],
pkt_len,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
(unsigned char *)(lp->rx_skbuff[entry]->data),
- pkt_len, 0);
+ pkt_len);
pci_dma_sync_single_for_device(lp->pci_dev,
lp->rx_dma_addr[entry],
pkt_len,
--- /dev/null
+/*****************************************************************************
+ * Linux PPP over L2TP (PPPoX/PPPoL2TP) Sockets
+ *
+ * PPPoX --- Generic PPP encapsulation socket family
+ * PPPoL2TP --- PPP over L2TP (RFC 2661)
+ *
+ * Version: 1.0.0
+ *
+ * Authors: Martijn van Oosterhout <kleptog@svana.org>
+ * James Chapman (jchapman@katalix.com)
+ * Contributors:
+ * Michal Ostrowski <mostrows@speakeasy.net>
+ * Arnaldo Carvalho de Melo <acme@xconectiva.com.br>
+ * David S. Miller (davem@redhat.com)
+ *
+ * License:
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+/* This driver handles only L2TP data frames; control frames are handled by a
+ * userspace application.
+ *
+ * To send data in an L2TP session, userspace opens a PPPoL2TP socket and
+ * attaches it to a bound UDP socket with local tunnel_id / session_id and
+ * peer tunnel_id / session_id set. Data can then be sent or received using
+ * regular socket sendmsg() / recvmsg() calls. Kernel parameters of the socket
+ * can be read or modified using ioctl() or [gs]etsockopt() calls.
+ *
+ * When a PPPoL2TP socket is connected with local and peer session_id values
+ * zero, the socket is treated as a special tunnel management socket.
+ *
+ * Here's example userspace code to create a socket for sending/receiving data
+ * over an L2TP session:-
+ *
+ * struct sockaddr_pppol2tp sax;
+ * int fd;
+ * int session_fd;
+ *
+ * fd = socket(AF_PPPOX, SOCK_DGRAM, PX_PROTO_OL2TP);
+ *
+ * sax.sa_family = AF_PPPOX;
+ * sax.sa_protocol = PX_PROTO_OL2TP;
+ * sax.pppol2tp.fd = tunnel_fd; // bound UDP socket
+ * sax.pppol2tp.addr.sin_addr.s_addr = addr->sin_addr.s_addr;
+ * sax.pppol2tp.addr.sin_port = addr->sin_port;
+ * sax.pppol2tp.addr.sin_family = AF_INET;
+ * sax.pppol2tp.s_tunnel = tunnel_id;
+ * sax.pppol2tp.s_session = session_id;
+ * sax.pppol2tp.d_tunnel = peer_tunnel_id;
+ * sax.pppol2tp.d_session = peer_session_id;
+ *
+ * session_fd = connect(fd, (struct sockaddr *)&sax, sizeof(sax));
+ *
+ * A pppd plugin that allows PPP traffic to be carried over L2TP using
+ * this driver is available from the OpenL2TP project at
+ * http://openl2tp.sourceforge.net.
+ */
+
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/string.h>
+#include <linux/list.h>
+#include <asm/uaccess.h>
+
+#include <linux/kernel.h>
+#include <linux/spinlock.h>
+#include <linux/kthread.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/jiffies.h>
+
+#include <linux/netdevice.h>
+#include <linux/net.h>
+#include <linux/inetdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/ip.h>
+#include <linux/udp.h>
+#include <linux/if_pppox.h>
+#include <linux/if_pppol2tp.h>
+#include <net/sock.h>
+#include <linux/ppp_channel.h>
+#include <linux/ppp_defs.h>
+#include <linux/if_ppp.h>
+#include <linux/file.h>
+#include <linux/hash.h>
+#include <linux/sort.h>
+#include <linux/proc_fs.h>
+#include <net/dst.h>
+#include <net/ip.h>
+#include <net/udp.h>
+#include <net/xfrm.h>
+
+#include <asm/byteorder.h>
+#include <asm/atomic.h>
+
+
+#define PPPOL2TP_DRV_VERSION "V1.0"
+
+/* L2TP header constants */
+#define L2TP_HDRFLAG_T 0x8000
+#define L2TP_HDRFLAG_L 0x4000
+#define L2TP_HDRFLAG_S 0x0800
+#define L2TP_HDRFLAG_O 0x0200
+#define L2TP_HDRFLAG_P 0x0100
+
+#define L2TP_HDR_VER_MASK 0x000F
+#define L2TP_HDR_VER 0x0002
+
+/* Space for UDP, L2TP and PPP headers */
+#define PPPOL2TP_HEADER_OVERHEAD 40
+
+/* Just some random numbers */
+#define L2TP_TUNNEL_MAGIC 0x42114DDA
+#define L2TP_SESSION_MAGIC 0x0C04EB7D
+
+#define PPPOL2TP_HASH_BITS 4
+#define PPPOL2TP_HASH_SIZE (1 << PPPOL2TP_HASH_BITS)
+
+/* Default trace flags */
+#define PPPOL2TP_DEFAULT_DEBUG_FLAGS 0
+
+#define PRINTK(_mask, _type, _lvl, _fmt, args...) \
+ do { \
+ if ((_mask) & (_type)) \
+ printk(_lvl "PPPOL2TP: " _fmt, ##args); \
+ } while(0)
+
+/* Number of bytes to build transmit L2TP headers.
+ * Unfortunately the size is different depending on whether sequence numbers
+ * are enabled.
+ */
+#define PPPOL2TP_L2TP_HDR_SIZE_SEQ 10
+#define PPPOL2TP_L2TP_HDR_SIZE_NOSEQ 6
+
+struct pppol2tp_tunnel;
+
+/* Describes a session. It is the sk_user_data field in the PPPoL2TP
+ * socket. Contains information to determine incoming packets and transmit
+ * outgoing ones.
+ */
+struct pppol2tp_session
+{
+ int magic; /* should be
+ * L2TP_SESSION_MAGIC */
+ int owner; /* pid that opened the socket */
+
+ struct sock *sock; /* Pointer to the session
+ * PPPoX socket */
+ struct sock *tunnel_sock; /* Pointer to the tunnel UDP
+ * socket */
+
+ struct pppol2tp_addr tunnel_addr; /* Description of tunnel */
+
+ struct pppol2tp_tunnel *tunnel; /* back pointer to tunnel
+ * context */
+
+ char name[20]; /* "sess xxxxx/yyyyy", where
+ * x=tunnel_id, y=session_id */
+ int mtu;
+ int mru;
+ int flags; /* accessed by PPPIOCGFLAGS.
+ * Unused. */
+ unsigned recv_seq:1; /* expect receive packets with
+ * sequence numbers? */
+ unsigned send_seq:1; /* send packets with sequence
+ * numbers? */
+ unsigned lns_mode:1; /* behave as LNS? LAC enables
+ * sequence numbers under
+ * control of LNS. */
+ int debug; /* bitmask of debug message
+ * categories */
+ int reorder_timeout; /* configured reorder timeout
+ * (in jiffies) */
+ u16 nr; /* session NR state (receive) */
+ u16 ns; /* session NR state (send) */
+ struct sk_buff_head reorder_q; /* receive reorder queue */
+ struct pppol2tp_ioc_stats stats;
+ struct hlist_node hlist; /* Hash list node */
+};
+
+/* The sk_user_data field of the tunnel's UDP socket. It contains info to track
+ * all the associated sessions so incoming packets can be sorted out
+ */
+struct pppol2tp_tunnel
+{
+ int magic; /* Should be L2TP_TUNNEL_MAGIC */
+ rwlock_t hlist_lock; /* protect session_hlist */
+ struct hlist_head session_hlist[PPPOL2TP_HASH_SIZE];
+ /* hashed list of sessions,
+ * hashed by id */
+ int debug; /* bitmask of debug message
+ * categories */
+ char name[12]; /* "tunl xxxxx" */
+ struct pppol2tp_ioc_stats stats;
+
+ void (*old_sk_destruct)(struct sock *);
+
+ struct sock *sock; /* Parent socket */
+ struct list_head list; /* Keep a list of all open
+ * prepared sockets */
+
+ atomic_t ref_count;
+};
+
+/* Private data stored for received packets in the skb.
+ */
+struct pppol2tp_skb_cb {
+ u16 ns;
+ u16 nr;
+ u16 has_seq;
+ u16 length;
+ unsigned long expires;
+};
+
+#define PPPOL2TP_SKB_CB(skb) ((struct pppol2tp_skb_cb *) &skb->cb[sizeof(struct inet_skb_parm)])
+
+static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb);
+static void pppol2tp_tunnel_free(struct pppol2tp_tunnel *tunnel);
+
+static atomic_t pppol2tp_tunnel_count;
+static atomic_t pppol2tp_session_count;
+static struct ppp_channel_ops pppol2tp_chan_ops = { pppol2tp_xmit , NULL };
+static struct proto_ops pppol2tp_ops;
+static LIST_HEAD(pppol2tp_tunnel_list);
+static DEFINE_RWLOCK(pppol2tp_tunnel_list_lock);
+
+/* Helpers to obtain tunnel/session contexts from sockets.
+ */
+static inline struct pppol2tp_session *pppol2tp_sock_to_session(struct sock *sk)
+{
+ struct pppol2tp_session *session;
+
+ if (sk == NULL)
+ return NULL;
+
+ session = (struct pppol2tp_session *)(sk->sk_user_data);
+ if (session == NULL)
+ return NULL;
+
+ BUG_ON(session->magic != L2TP_SESSION_MAGIC);
+
+ return session;
+}
+
+static inline struct pppol2tp_tunnel *pppol2tp_sock_to_tunnel(struct sock *sk)
+{
+ struct pppol2tp_tunnel *tunnel;
+
+ if (sk == NULL)
+ return NULL;
+
+ tunnel = (struct pppol2tp_tunnel *)(sk->sk_user_data);
+ if (tunnel == NULL)
+ return NULL;
+
+ BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
+
+ return tunnel;
+}
+
+/* Tunnel reference counts. Incremented per session that is added to
+ * the tunnel.
+ */
+static inline void pppol2tp_tunnel_inc_refcount(struct pppol2tp_tunnel *tunnel)
+{
+ atomic_inc(&tunnel->ref_count);
+}
+
+static inline void pppol2tp_tunnel_dec_refcount(struct pppol2tp_tunnel *tunnel)
+{
+ if (atomic_dec_and_test(&tunnel->ref_count))
+ pppol2tp_tunnel_free(tunnel);
+}
+
+/* Session hash list.
+ * The session_id SHOULD be random according to RFC2661, but several
+ * L2TP implementations (Cisco and Microsoft) use incrementing
+ * session_ids. So we do a real hash on the session_id, rather than a
+ * simple bitmask.
+ */
+static inline struct hlist_head *
+pppol2tp_session_id_hash(struct pppol2tp_tunnel *tunnel, u16 session_id)
+{
+ unsigned long hash_val = (unsigned long) session_id;
+ return &tunnel->session_hlist[hash_long(hash_val, PPPOL2TP_HASH_BITS)];
+}
+
+/* Lookup a session by id
+ */
+static struct pppol2tp_session *
+pppol2tp_session_find(struct pppol2tp_tunnel *tunnel, u16 session_id)
+{
+ struct hlist_head *session_list =
+ pppol2tp_session_id_hash(tunnel, session_id);
+ struct pppol2tp_session *session;
+ struct hlist_node *walk;
+
+ read_lock(&tunnel->hlist_lock);
+ hlist_for_each_entry(session, walk, session_list, hlist) {
+ if (session->tunnel_addr.s_session == session_id) {
+ read_unlock(&tunnel->hlist_lock);
+ return session;
+ }
+ }
+ read_unlock(&tunnel->hlist_lock);
+
+ return NULL;
+}
+
+/* Lookup a tunnel by id
+ */
+static struct pppol2tp_tunnel *pppol2tp_tunnel_find(u16 tunnel_id)
+{
+ struct pppol2tp_tunnel *tunnel = NULL;
+
+ read_lock(&pppol2tp_tunnel_list_lock);
+ list_for_each_entry(tunnel, &pppol2tp_tunnel_list, list) {
+ if (tunnel->stats.tunnel_id == tunnel_id) {
+ read_unlock(&pppol2tp_tunnel_list_lock);
+ return tunnel;
+ }
+ }
+ read_unlock(&pppol2tp_tunnel_list_lock);
+
+ return NULL;
+}
+
+/*****************************************************************************
+ * Receive data handling
+ *****************************************************************************/
+
+/* Queue a skb in order. We come here only if the skb has an L2TP sequence
+ * number.
+ */
+static void pppol2tp_recv_queue_skb(struct pppol2tp_session *session, struct sk_buff *skb)
+{
+ struct sk_buff *skbp;
+ u16 ns = PPPOL2TP_SKB_CB(skb)->ns;
+
+ spin_lock(&session->reorder_q.lock);
+ skb_queue_walk(&session->reorder_q, skbp) {
+ if (PPPOL2TP_SKB_CB(skbp)->ns > ns) {
+ __skb_insert(skb, skbp->prev, skbp, &session->reorder_q);
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+ "%s: pkt %hu, inserted before %hu, reorder_q len=%d\n",
+ session->name, ns, PPPOL2TP_SKB_CB(skbp)->ns,
+ skb_queue_len(&session->reorder_q));
+ session->stats.rx_oos_packets++;
+ goto out;
+ }
+ }
+
+ __skb_queue_tail(&session->reorder_q, skb);
+
+out:
+ spin_unlock(&session->reorder_q.lock);
+}
+
+/* Dequeue a single skb.
+ */
+static void pppol2tp_recv_dequeue_skb(struct pppol2tp_session *session, struct sk_buff *skb)
+{
+ struct pppol2tp_tunnel *tunnel = session->tunnel;
+ int length = PPPOL2TP_SKB_CB(skb)->length;
+ struct sock *session_sock = NULL;
+
+ /* We're about to requeue the skb, so unlink it and return resources
+ * to its current owner (a socket receive buffer).
+ */
+ skb_unlink(skb, &session->reorder_q);
+ skb_orphan(skb);
+
+ tunnel->stats.rx_packets++;
+ tunnel->stats.rx_bytes += length;
+ session->stats.rx_packets++;
+ session->stats.rx_bytes += length;
+
+ if (PPPOL2TP_SKB_CB(skb)->has_seq) {
+ /* Bump our Nr */
+ session->nr++;
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+ "%s: updated nr to %hu\n", session->name, session->nr);
+ }
+
+ /* If the socket is bound, send it in to PPP's input queue. Otherwise
+ * queue it on the session socket.
+ */
+ session_sock = session->sock;
+ if (session_sock->sk_state & PPPOX_BOUND) {
+ struct pppox_sock *po;
+ PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+ "%s: recv %d byte data frame, passing to ppp\n",
+ session->name, length);
+
+ /* We need to forget all info related to the L2TP packet
+ * gathered in the skb as we are going to reuse the same
+ * skb for the inner packet.
+ * Namely we need to:
+ * - reset xfrm (IPSec) information as it applies to
+ * the outer L2TP packet and not to the inner one
+ * - release the dst to force a route lookup on the inner
+ * IP packet since skb->dst currently points to the dst
+ * of the UDP tunnel
+ * - reset netfilter information as it doesn't apply
+ * to the inner packet either
+ */
+ secpath_reset(skb);
+ dst_release(skb->dst);
+ skb->dst = NULL;
+ nf_reset(skb);
+
+ po = pppox_sk(session_sock);
+ ppp_input(&po->chan, skb);
+ } else {
+ PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
+ "%s: socket not bound\n", session->name);
+
+ /* Not bound. Nothing we can do, so discard. */
+ session->stats.rx_errors++;
+ kfree_skb(skb);
+ }
+
+ sock_put(session->sock);
+}
+
+/* Dequeue skbs from the session's reorder_q, subject to packet order.
+ * Skbs that have been in the queue for too long are simply discarded.
+ */
+static void pppol2tp_recv_dequeue(struct pppol2tp_session *session)
+{
+ struct sk_buff *skb;
+ struct sk_buff *tmp;
+
+ /* If the pkt at the head of the queue has the nr that we
+ * expect to send up next, dequeue it and any other
+ * in-sequence packets behind it.
+ */
+ spin_lock(&session->reorder_q.lock);
+ skb_queue_walk_safe(&session->reorder_q, skb, tmp) {
+ if (time_after(jiffies, PPPOL2TP_SKB_CB(skb)->expires)) {
+ session->stats.rx_seq_discards++;
+ session->stats.rx_errors++;
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+ "%s: oos pkt %hu len %d discarded (too old), "
+ "waiting for %hu, reorder_q_len=%d\n",
+ session->name, PPPOL2TP_SKB_CB(skb)->ns,
+ PPPOL2TP_SKB_CB(skb)->length, session->nr,
+ skb_queue_len(&session->reorder_q));
+ __skb_unlink(skb, &session->reorder_q);
+ kfree_skb(skb);
+ continue;
+ }
+
+ if (PPPOL2TP_SKB_CB(skb)->has_seq) {
+ if (PPPOL2TP_SKB_CB(skb)->ns != session->nr) {
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+ "%s: holding oos pkt %hu len %d, "
+ "waiting for %hu, reorder_q_len=%d\n",
+ session->name, PPPOL2TP_SKB_CB(skb)->ns,
+ PPPOL2TP_SKB_CB(skb)->length, session->nr,
+ skb_queue_len(&session->reorder_q));
+ goto out;
+ }
+ }
+ spin_unlock(&session->reorder_q.lock);
+ pppol2tp_recv_dequeue_skb(session, skb);
+ spin_lock(&session->reorder_q.lock);
+ }
+
+out:
+ spin_unlock(&session->reorder_q.lock);
+}
+
+/* Internal receive frame. Do the real work of receiving an L2TP data frame
+ * here. The skb is not on a list when we get here.
+ * Returns 0 if the packet was a data packet and was successfully passed on.
+ * Returns 1 if the packet was not a good data packet and could not be
+ * forwarded. All such packets are passed up to userspace to deal with.
+ */
+static int pppol2tp_recv_core(struct sock *sock, struct sk_buff *skb)
+{
+ struct pppol2tp_session *session = NULL;
+ struct pppol2tp_tunnel *tunnel;
+ unsigned char *ptr;
+ u16 hdrflags;
+ u16 tunnel_id, session_id;
+ int length;
+ struct udphdr *uh;
+
+ tunnel = pppol2tp_sock_to_tunnel(sock);
+ if (tunnel == NULL)
+ goto error;
+
+ /* Short packet? */
+ if (skb->len < sizeof(struct udphdr)) {
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
+ "%s: recv short packet (len=%d)\n", tunnel->name, skb->len);
+ goto error;
+ }
+
+ /* Point to L2TP header */
+ ptr = skb->data + sizeof(struct udphdr);
+
+ /* Get L2TP header flags */
+ hdrflags = ntohs(*(__be16*)ptr);
+
+ /* Trace packet contents, if enabled */
+ if (tunnel->debug & PPPOL2TP_MSG_DATA) {
+ printk(KERN_DEBUG "%s: recv: ", tunnel->name);
+
+ for (length = 0; length < 16; length++)
+ printk(" %02X", ptr[length]);
+ printk("\n");
+ }
+
+ /* Get length of L2TP packet */
+ uh = (struct udphdr *) skb_transport_header(skb);
+ length = ntohs(uh->len) - sizeof(struct udphdr);
+
+ /* Too short? */
+ if (length < 12) {
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
+ "%s: recv short L2TP packet (len=%d)\n", tunnel->name, length);
+ goto error;
+ }
+
+ /* If type is control packet, it is handled by userspace. */
+ if (hdrflags & L2TP_HDRFLAG_T) {
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+ "%s: recv control packet, len=%d\n", tunnel->name, length);
+ goto error;
+ }
+
+ /* Skip flags */
+ ptr += 2;
+
+ /* If length is present, skip it */
+ if (hdrflags & L2TP_HDRFLAG_L)
+ ptr += 2;
+
+ /* Extract tunnel and session ID */
+ tunnel_id = ntohs(*(__be16 *) ptr);
+ ptr += 2;
+ session_id = ntohs(*(__be16 *) ptr);
+ ptr += 2;
+
+ /* Find the session context */
+ session = pppol2tp_session_find(tunnel, session_id);
+ if (!session) {
+ /* Not found? Pass to userspace to deal with */
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_INFO,
+ "%s: no socket found (%hu/%hu). Passing up.\n",
+ tunnel->name, tunnel_id, session_id);
+ goto error;
+ }
+ sock_hold(session->sock);
+
+ /* The ref count on the socket was increased by the above call since
+ * we now hold a pointer to the session. Take care to do sock_put()
+ * when exiting this function from now on...
+ */
+
+ /* Handle the optional sequence numbers. If we are the LAC,
+ * enable/disable sequence numbers under the control of the LNS. If
+ * no sequence numbers present but we were expecting them, discard
+ * frame.
+ */
+ if (hdrflags & L2TP_HDRFLAG_S) {
+ u16 ns, nr;
+ ns = ntohs(*(__be16 *) ptr);
+ ptr += 2;
+ nr = ntohs(*(__be16 *) ptr);
+ ptr += 2;
+
+ /* Received a packet with sequence numbers. If we're the LNS,
+ * check if we sre sending sequence numbers and if not,
+ * configure it so.
+ */
+ if ((!session->lns_mode) && (!session->send_seq)) {
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_INFO,
+ "%s: requested to enable seq numbers by LNS\n",
+ session->name);
+ session->send_seq = -1;
+ }
+
+ /* Store L2TP info in the skb */
+ PPPOL2TP_SKB_CB(skb)->ns = ns;
+ PPPOL2TP_SKB_CB(skb)->nr = nr;
+ PPPOL2TP_SKB_CB(skb)->has_seq = 1;
+
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+ "%s: recv data ns=%hu, nr=%hu, session nr=%hu\n",
+ session->name, ns, nr, session->nr);
+ } else {
+ /* No sequence numbers.
+ * If user has configured mandatory sequence numbers, discard.
+ */
+ if (session->recv_seq) {
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_WARNING,
+ "%s: recv data has no seq numbers when required. "
+ "Discarding\n", session->name);
+ session->stats.rx_seq_discards++;
+ session->stats.rx_errors++;
+ goto discard;
+ }
+
+ /* If we're the LAC and we're sending sequence numbers, the
+ * LNS has requested that we no longer send sequence numbers.
+ * If we're the LNS and we're sending sequence numbers, the
+ * LAC is broken. Discard the frame.
+ */
+ if ((!session->lns_mode) && (session->send_seq)) {
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_INFO,
+ "%s: requested to disable seq numbers by LNS\n",
+ session->name);
+ session->send_seq = 0;
+ } else if (session->send_seq) {
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_WARNING,
+ "%s: recv data has no seq numbers when required. "
+ "Discarding\n", session->name);
+ session->stats.rx_seq_discards++;
+ session->stats.rx_errors++;
+ goto discard;
+ }
+
+ /* Store L2TP info in the skb */
+ PPPOL2TP_SKB_CB(skb)->has_seq = 0;
+ }
+
+ /* If offset bit set, skip it. */
+ if (hdrflags & L2TP_HDRFLAG_O)
+ ptr += 2 + ntohs(*(__be16 *) ptr);
+
+ skb_pull(skb, ptr - skb->data);
+
+ /* Skip PPP header, if present. In testing, Microsoft L2TP clients
+ * don't send the PPP header (PPP header compression enabled), but
+ * other clients can include the header. So we cope with both cases
+ * here. The PPP header is always FF03 when using L2TP.
+ *
+ * Note that skb->data[] isn't dereferenced from a u16 ptr here since
+ * the field may be unaligned.
+ */
+ if ((skb->data[0] == 0xff) && (skb->data[1] == 0x03))
+ skb_pull(skb, 2);
+
+ /* Prepare skb for adding to the session's reorder_q. Hold
+ * packets for max reorder_timeout or 1 second if not
+ * reordering.
+ */
+ PPPOL2TP_SKB_CB(skb)->length = length;
+ PPPOL2TP_SKB_CB(skb)->expires = jiffies +
+ (session->reorder_timeout ? session->reorder_timeout : HZ);
+
+ /* Add packet to the session's receive queue. Reordering is done here, if
+ * enabled. Saved L2TP protocol info is stored in skb->sb[].
+ */
+ if (PPPOL2TP_SKB_CB(skb)->has_seq) {
+ if (session->reorder_timeout != 0) {
+ /* Packet reordering enabled. Add skb to session's
+ * reorder queue, in order of ns.
+ */
+ pppol2tp_recv_queue_skb(session, skb);
+ } else {
+ /* Packet reordering disabled. Discard out-of-sequence
+ * packets
+ */
+ if (PPPOL2TP_SKB_CB(skb)->ns != session->nr) {
+ session->stats.rx_seq_discards++;
+ session->stats.rx_errors++;
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+ "%s: oos pkt %hu len %d discarded, "
+ "waiting for %hu, reorder_q_len=%d\n",
+ session->name, PPPOL2TP_SKB_CB(skb)->ns,
+ PPPOL2TP_SKB_CB(skb)->length, session->nr,
+ skb_queue_len(&session->reorder_q));
+ goto discard;
+ }
+ skb_queue_tail(&session->reorder_q, skb);
+ }
+ } else {
+ /* No sequence numbers. Add the skb to the tail of the
+ * reorder queue. This ensures that it will be
+ * delivered after all previous sequenced skbs.
+ */
+ skb_queue_tail(&session->reorder_q, skb);
+ }
+
+ /* Try to dequeue as many skbs from reorder_q as we can. */
+ pppol2tp_recv_dequeue(session);
+
+ return 0;
+
+discard:
+ kfree_skb(skb);
+ sock_put(session->sock);
+
+ return 0;
+
+error:
+ return 1;
+}
+
+/* UDP encapsulation receive handler. See net/ipv4/udp.c.
+ * Return codes:
+ * 0 : success.
+ * <0: error
+ * >0: skb should be passed up to userspace as UDP.
+ */
+static int pppol2tp_udp_encap_recv(struct sock *sk, struct sk_buff *skb)
+{
+ struct pppol2tp_tunnel *tunnel;
+
+ tunnel = pppol2tp_sock_to_tunnel(sk);
+ if (tunnel == NULL)
+ goto pass_up;
+
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+ "%s: received %d bytes\n", tunnel->name, skb->len);
+
+ if (pppol2tp_recv_core(sk, skb))
+ goto pass_up;
+
+ return 0;
+
+pass_up:
+ return 1;
+}
+
+/* Receive message. This is the recvmsg for the PPPoL2TP socket.
+ */
+static int pppol2tp_recvmsg(struct kiocb *iocb, struct socket *sock,
+ struct msghdr *msg, size_t len,
+ int flags)
+{
+ int err;
+ struct sk_buff *skb;
+ struct sock *sk = sock->sk;
+
+ err = -EIO;
+ if (sk->sk_state & PPPOX_BOUND)
+ goto end;
+
+ msg->msg_namelen = 0;
+
+ err = 0;
+ skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
+ flags & MSG_DONTWAIT, &err);
+ if (skb) {
+ err = memcpy_toiovec(msg->msg_iov, (unsigned char *) skb->data,
+ skb->len);
+ if (err < 0)
+ goto do_skb_free;
+ err = skb->len;
+ }
+do_skb_free:
+ kfree_skb(skb);
+end:
+ return err;
+}
+
+/************************************************************************
+ * Transmit handling
+ ***********************************************************************/
+
+/* Tell how big L2TP headers are for a particular session. This
+ * depends on whether sequence numbers are being used.
+ */
+static inline int pppol2tp_l2tp_header_len(struct pppol2tp_session *session)
+{
+ if (session->send_seq)
+ return PPPOL2TP_L2TP_HDR_SIZE_SEQ;
+
+ return PPPOL2TP_L2TP_HDR_SIZE_NOSEQ;
+}
+
+/* Build an L2TP header for the session into the buffer provided.
+ */
+static void pppol2tp_build_l2tp_header(struct pppol2tp_session *session,
+ void *buf)
+{
+ __be16 *bufp = buf;
+ u16 flags = L2TP_HDR_VER;
+
+ if (session->send_seq)
+ flags |= L2TP_HDRFLAG_S;
+
+ /* Setup L2TP header.
+ * FIXME: Can this ever be unaligned? Is direct dereferencing of
+ * 16-bit header fields safe here for all architectures?
+ */
+ *bufp++ = htons(flags);
+ *bufp++ = htons(session->tunnel_addr.d_tunnel);
+ *bufp++ = htons(session->tunnel_addr.d_session);
+ if (session->send_seq) {
+ *bufp++ = htons(session->ns);
+ *bufp++ = 0;
+ session->ns++;
+ PRINTK(session->debug, PPPOL2TP_MSG_SEQ, KERN_DEBUG,
+ "%s: updated ns to %hu\n", session->name, session->ns);
+ }
+}
+
+/* This is the sendmsg for the PPPoL2TP pppol2tp_session socket. We come here
+ * when a user application does a sendmsg() on the session socket. L2TP and
+ * PPP headers must be inserted into the user's data.
+ */
+static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msghdr *m,
+ size_t total_len)
+{
+ static const unsigned char ppph[2] = { 0xff, 0x03 };
+ struct sock *sk = sock->sk;
+ struct inet_sock *inet;
+ __wsum csum = 0;
+ struct sk_buff *skb;
+ int error;
+ int hdr_len;
+ struct pppol2tp_session *session;
+ struct pppol2tp_tunnel *tunnel;
+ struct udphdr *uh;
+
+ error = -ENOTCONN;
+ if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED))
+ goto error;
+
+ /* Get session and tunnel contexts */
+ error = -EBADF;
+ session = pppol2tp_sock_to_session(sk);
+ if (session == NULL)
+ goto error;
+
+ tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
+ if (tunnel == NULL)
+ goto error;
+
+ /* What header length is configured for this session? */
+ hdr_len = pppol2tp_l2tp_header_len(session);
+
+ /* Allocate a socket buffer */
+ error = -ENOMEM;
+ skb = sock_wmalloc(sk, NET_SKB_PAD + sizeof(struct iphdr) +
+ sizeof(struct udphdr) + hdr_len +
+ sizeof(ppph) + total_len,
+ 0, GFP_KERNEL);
+ if (!skb)
+ goto error;
+
+ /* Reserve space for headers. */
+ skb_reserve(skb, NET_SKB_PAD);
+ skb_reset_network_header(skb);
+ skb_reserve(skb, sizeof(struct iphdr));
+ skb_reset_transport_header(skb);
+
+ /* Build UDP header */
+ inet = inet_sk(session->tunnel_sock);
+ uh = (struct udphdr *) skb->data;
+ uh->source = inet->sport;
+ uh->dest = inet->dport;
+ uh->len = htons(hdr_len + sizeof(ppph) + total_len);
+ uh->check = 0;
+ skb_put(skb, sizeof(struct udphdr));
+
+ /* Build L2TP header */
+ pppol2tp_build_l2tp_header(session, skb->data);
+ skb_put(skb, hdr_len);
+
+ /* Add PPP header */
+ skb->data[0] = ppph[0];
+ skb->data[1] = ppph[1];
+ skb_put(skb, 2);
+
+ /* Copy user data into skb */
+ error = memcpy_fromiovec(skb->data, m->msg_iov, total_len);
+ if (error < 0) {
+ kfree_skb(skb);
+ goto error;
+ }
+ skb_put(skb, total_len);
+
+ /* Calculate UDP checksum if configured to do so */
+ if (session->tunnel_sock->sk_no_check != UDP_CSUM_NOXMIT)
+ csum = udp_csum_outgoing(sk, skb);
+
+ /* Debug */
+ if (session->send_seq)
+ PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+ "%s: send %Zd bytes, ns=%hu\n", session->name,
+ total_len, session->ns - 1);
+ else
+ PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+ "%s: send %Zd bytes\n", session->name, total_len);
+
+ if (session->debug & PPPOL2TP_MSG_DATA) {
+ int i;
+ unsigned char *datap = skb->data;
+
+ printk(KERN_DEBUG "%s: xmit:", session->name);
+ for (i = 0; i < total_len; i++) {
+ printk(" %02X", *datap++);
+ if (i == 15) {
+ printk(" ...");
+ break;
+ }
+ }
+ printk("\n");
+ }
+
+ /* Queue the packet to IP for output */
+ error = ip_queue_xmit(skb, 1);
+
+ /* Update stats */
+ if (error >= 0) {
+ tunnel->stats.tx_packets++;
+ tunnel->stats.tx_bytes += skb->len;
+ session->stats.tx_packets++;
+ session->stats.tx_bytes += skb->len;
+ } else {
+ tunnel->stats.tx_errors++;
+ session->stats.tx_errors++;
+ }
+
+error:
+ return error;
+}
+
+/* Transmit function called by generic PPP driver. Sends PPP frame
+ * over PPPoL2TP socket.
+ *
+ * This is almost the same as pppol2tp_sendmsg(), but rather than
+ * being called with a msghdr from userspace, it is called with a skb
+ * from the kernel.
+ *
+ * The supplied skb from ppp doesn't have enough headroom for the
+ * insertion of L2TP, UDP and IP headers so we need to allocate more
+ * headroom in the skb. This will create a cloned skb. But we must be
+ * careful in the error case because the caller will expect to free
+ * the skb it supplied, not our cloned skb. So we take care to always
+ * leave the original skb unfreed if we return an error.
+ */
+static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb)
+{
+ static const u8 ppph[2] = { 0xff, 0x03 };
+ struct sock *sk = (struct sock *) chan->private;
+ struct sock *sk_tun;
+ int hdr_len;
+ struct pppol2tp_session *session;
+ struct pppol2tp_tunnel *tunnel;
+ int rc;
+ int headroom;
+ int data_len = skb->len;
+ struct inet_sock *inet;
+ __wsum csum = 0;
+ struct sk_buff *skb2 = NULL;
+ struct udphdr *uh;
+
+ if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED))
+ goto abort;
+
+ /* Get session and tunnel contexts from the socket */
+ session = pppol2tp_sock_to_session(sk);
+ if (session == NULL)
+ goto abort;
+
+ sk_tun = session->tunnel_sock;
+ if (sk_tun == NULL)
+ goto abort;
+ tunnel = pppol2tp_sock_to_tunnel(sk_tun);
+ if (tunnel == NULL)
+ goto abort;
+
+ /* What header length is configured for this session? */
+ hdr_len = pppol2tp_l2tp_header_len(session);
+
+ /* Check that there's enough headroom in the skb to insert IP,
+ * UDP and L2TP and PPP headers. If not enough, expand it to
+ * make room. Note that a new skb (or a clone) is
+ * allocated. If we return an error from this point on, make
+ * sure we free the new skb but do not free the original skb
+ * since that is done by the caller for the error case.
+ */
+ headroom = NET_SKB_PAD + sizeof(struct iphdr) +
+ sizeof(struct udphdr) + hdr_len + sizeof(ppph);
+ if (skb_headroom(skb) < headroom) {
+ skb2 = skb_realloc_headroom(skb, headroom);
+ if (skb2 == NULL)
+ goto abort;
+ } else
+ skb2 = skb;
+
+ /* Check that the socket has room */
+ if (atomic_read(&sk_tun->sk_wmem_alloc) < sk_tun->sk_sndbuf)
+ skb_set_owner_w(skb2, sk_tun);
+ else
+ goto discard;
+
+ /* Setup PPP header */
+ skb_push(skb2, sizeof(ppph));
+ skb2->data[0] = ppph[0];
+ skb2->data[1] = ppph[1];
+
+ /* Setup L2TP header */
+ skb_push(skb2, hdr_len);
+ pppol2tp_build_l2tp_header(session, skb2->data);
+
+ /* Setup UDP header */
+ inet = inet_sk(sk_tun);
+ skb_push(skb2, sizeof(struct udphdr));
+ skb_reset_transport_header(skb2);
+ uh = (struct udphdr *) skb2->data;
+ uh->source = inet->sport;
+ uh->dest = inet->dport;
+ uh->len = htons(sizeof(struct udphdr) + hdr_len + sizeof(ppph) + data_len);
+ uh->check = 0;
+
+ /* Calculate UDP checksum if configured to do so */
+ if (sk_tun->sk_no_check != UDP_CSUM_NOXMIT)
+ csum = udp_csum_outgoing(sk_tun, skb2);
+
+ /* Debug */
+ if (session->send_seq)
+ PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+ "%s: send %d bytes, ns=%hu\n", session->name,
+ data_len, session->ns - 1);
+ else
+ PRINTK(session->debug, PPPOL2TP_MSG_DATA, KERN_DEBUG,
+ "%s: send %d bytes\n", session->name, data_len);
+
+ if (session->debug & PPPOL2TP_MSG_DATA) {
+ int i;
+ unsigned char *datap = skb2->data;
+
+ printk(KERN_DEBUG "%s: xmit:", session->name);
+ for (i = 0; i < data_len; i++) {
+ printk(" %02X", *datap++);
+ if (i == 31) {
+ printk(" ...");
+ break;
+ }
+ }
+ printk("\n");
+ }
+
+ /* Get routing info from the tunnel socket */
+ skb2->dst = sk_dst_get(sk_tun);
+
+ /* Queue the packet to IP for output */
+ rc = ip_queue_xmit(skb2, 1);
+
+ /* Update stats */
+ if (rc >= 0) {
+ tunnel->stats.tx_packets++;
+ tunnel->stats.tx_bytes += skb2->len;
+ session->stats.tx_packets++;
+ session->stats.tx_bytes += skb2->len;
+ } else {
+ tunnel->stats.tx_errors++;
+ session->stats.tx_errors++;
+ }
+
+ /* Free the original skb */
+ kfree_skb(skb);
+
+ return 1;
+
+discard:
+ /* Free the new skb. Caller will free original skb. */
+ if (skb2 != skb)
+ kfree_skb(skb2);
+abort:
+ return 0;
+}
+
+/*****************************************************************************
+ * Session (and tunnel control) socket create/destroy.
+ *****************************************************************************/
+
+/* When the tunnel UDP socket is closed, all the attached sockets need to go
+ * too.
+ */
+static void pppol2tp_tunnel_closeall(struct pppol2tp_tunnel *tunnel)
+{
+ int hash;
+ struct hlist_node *walk;
+ struct hlist_node *tmp;
+ struct pppol2tp_session *session;
+ struct sock *sk;
+
+ if (tunnel == NULL)
+ BUG();
+
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: closing all sessions...\n", tunnel->name);
+
+ write_lock(&tunnel->hlist_lock);
+ for (hash = 0; hash < PPPOL2TP_HASH_SIZE; hash++) {
+again:
+ hlist_for_each_safe(walk, tmp, &tunnel->session_hlist[hash]) {
+ session = hlist_entry(walk, struct pppol2tp_session, hlist);
+
+ sk = session->sock;
+
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: closing session\n", session->name);
+
+ hlist_del_init(&session->hlist);
+
+ /* Since we should hold the sock lock while
+ * doing any unbinding, we need to release the
+ * lock we're holding before taking that lock.
+ * Hold a reference to the sock so it doesn't
+ * disappear as we're jumping between locks.
+ */
+ sock_hold(sk);
+ write_unlock(&tunnel->hlist_lock);
+ lock_sock(sk);
+
+ if (sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND)) {
+ pppox_unbind_sock(sk);
+ sk->sk_state = PPPOX_DEAD;
+ sk->sk_state_change(sk);
+ }
+
+ /* Purge any queued data */
+ skb_queue_purge(&sk->sk_receive_queue);
+ skb_queue_purge(&sk->sk_write_queue);
+ skb_queue_purge(&session->reorder_q);
+
+ release_sock(sk);
+ sock_put(sk);
+
+ /* Now restart from the beginning of this hash
+ * chain. We always remove a session from the
+ * list so we are guaranteed to make forward
+ * progress.
+ */
+ write_lock(&tunnel->hlist_lock);
+ goto again;
+ }
+ }
+ write_unlock(&tunnel->hlist_lock);
+}
+
+/* Really kill the tunnel.
+ * Come here only when all sessions have been cleared from the tunnel.
+ */
+static void pppol2tp_tunnel_free(struct pppol2tp_tunnel *tunnel)
+{
+ /* Remove from socket list */
+ write_lock(&pppol2tp_tunnel_list_lock);
+ list_del_init(&tunnel->list);
+ write_unlock(&pppol2tp_tunnel_list_lock);
+
+ atomic_dec(&pppol2tp_tunnel_count);
+ kfree(tunnel);
+}
+
+/* Tunnel UDP socket destruct hook.
+ * The tunnel context is deleted only when all session sockets have been
+ * closed.
+ */
+static void pppol2tp_tunnel_destruct(struct sock *sk)
+{
+ struct pppol2tp_tunnel *tunnel;
+
+ tunnel = pppol2tp_sock_to_tunnel(sk);
+ if (tunnel == NULL)
+ goto end;
+
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: closing...\n", tunnel->name);
+
+ /* Close all sessions */
+ pppol2tp_tunnel_closeall(tunnel);
+
+ /* No longer an encapsulation socket. See net/ipv4/udp.c */
+ (udp_sk(sk))->encap_type = 0;
+ (udp_sk(sk))->encap_rcv = NULL;
+
+ /* Remove hooks into tunnel socket */
+ tunnel->sock = NULL;
+ sk->sk_destruct = tunnel->old_sk_destruct;
+ sk->sk_user_data = NULL;
+
+ /* Call original (UDP) socket descructor */
+ if (sk->sk_destruct != NULL)
+ (*sk->sk_destruct)(sk);
+
+ pppol2tp_tunnel_dec_refcount(tunnel);
+
+end:
+ return;
+}
+
+/* Really kill the session socket. (Called from sock_put() if
+ * refcnt == 0.)
+ */
+static void pppol2tp_session_destruct(struct sock *sk)
+{
+ struct pppol2tp_session *session = NULL;
+
+ if (sk->sk_user_data != NULL) {
+ struct pppol2tp_tunnel *tunnel;
+
+ session = pppol2tp_sock_to_session(sk);
+ if (session == NULL)
+ goto out;
+
+ /* Don't use pppol2tp_sock_to_tunnel() here to
+ * get the tunnel context because the tunnel
+ * socket might have already been closed (its
+ * sk->sk_user_data will be NULL) so use the
+ * session's private tunnel ptr instead.
+ */
+ tunnel = session->tunnel;
+ if (tunnel != NULL) {
+ BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
+
+ /* If session_id is zero, this is a null
+ * session context, which was created for a
+ * socket that is being used only to manage
+ * tunnels.
+ */
+ if (session->tunnel_addr.s_session != 0) {
+ /* Delete the session socket from the
+ * hash
+ */
+ write_lock(&tunnel->hlist_lock);
+ hlist_del_init(&session->hlist);
+ write_unlock(&tunnel->hlist_lock);
+
+ atomic_dec(&pppol2tp_session_count);
+ }
+
+ /* This will delete the tunnel context if this
+ * is the last session on the tunnel.
+ */
+ session->tunnel = NULL;
+ session->tunnel_sock = NULL;
+ pppol2tp_tunnel_dec_refcount(tunnel);
+ }
+ }
+
+ kfree(session);
+out:
+ return;
+}
+
+/* Called when the PPPoX socket (session) is closed.
+ */
+static int pppol2tp_release(struct socket *sock)
+{
+ struct sock *sk = sock->sk;
+ int error;
+
+ if (!sk)
+ return 0;
+
+ error = -EBADF;
+ lock_sock(sk);
+ if (sock_flag(sk, SOCK_DEAD) != 0)
+ goto error;
+
+ pppox_unbind_sock(sk);
+
+ /* Signal the death of the socket. */
+ sk->sk_state = PPPOX_DEAD;
+ sock_orphan(sk);
+ sock->sk = NULL;
+
+ /* Purge any queued data */
+ skb_queue_purge(&sk->sk_receive_queue);
+ skb_queue_purge(&sk->sk_write_queue);
+
+ release_sock(sk);
+
+ /* This will delete the session context via
+ * pppol2tp_session_destruct() if the socket's refcnt drops to
+ * zero.
+ */
+ sock_put(sk);
+
+ return 0;
+
+error:
+ release_sock(sk);
+ return error;
+}
+
+/* Internal function to prepare a tunnel (UDP) socket to have PPPoX
+ * sockets attached to it.
+ */
+static struct sock *pppol2tp_prepare_tunnel_socket(int fd, u16 tunnel_id,
+ int *error)
+{
+ int err;
+ struct socket *sock = NULL;
+ struct sock *sk;
+ struct pppol2tp_tunnel *tunnel;
+ struct sock *ret = NULL;
+
+ /* Get the tunnel UDP socket from the fd, which was opened by
+ * the userspace L2TP daemon.
+ */
+ err = -EBADF;
+ sock = sockfd_lookup(fd, &err);
+ if (!sock) {
+ PRINTK(-1, PPPOL2TP_MSG_CONTROL, KERN_ERR,
+ "tunl %hu: sockfd_lookup(fd=%d) returned %d\n",
+ tunnel_id, fd, err);
+ goto err;
+ }
+
+ /* Quick sanity checks */
+ err = -ESOCKTNOSUPPORT;
+ if (sock->type != SOCK_DGRAM) {
+ PRINTK(-1, PPPOL2TP_MSG_CONTROL, KERN_ERR,
+ "tunl %hu: fd %d wrong type, got %d, expected %d\n",
+ tunnel_id, fd, sock->type, SOCK_DGRAM);
+ goto err;
+ }
+ err = -EAFNOSUPPORT;
+ if (sock->ops->family != AF_INET) {
+ PRINTK(-1, PPPOL2TP_MSG_CONTROL, KERN_ERR,
+ "tunl %hu: fd %d wrong family, got %d, expected %d\n",
+ tunnel_id, fd, sock->ops->family, AF_INET);
+ goto err;
+ }
+
+ err = -ENOTCONN;
+ sk = sock->sk;
+
+ /* Check if this socket has already been prepped */
+ tunnel = (struct pppol2tp_tunnel *)sk->sk_user_data;
+ if (tunnel != NULL) {
+ /* User-data field already set */
+ err = -EBUSY;
+ BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
+
+ /* This socket has already been prepped */
+ ret = tunnel->sock;
+ goto out;
+ }
+
+ /* This socket is available and needs prepping. Create a new tunnel
+ * context and init it.
+ */
+ sk->sk_user_data = tunnel = kzalloc(sizeof(struct pppol2tp_tunnel), GFP_KERNEL);
+ if (sk->sk_user_data == NULL) {
+ err = -ENOMEM;
+ goto err;
+ }
+
+ tunnel->magic = L2TP_TUNNEL_MAGIC;
+ sprintf(&tunnel->name[0], "tunl %hu", tunnel_id);
+
+ tunnel->stats.tunnel_id = tunnel_id;
+ tunnel->debug = PPPOL2TP_DEFAULT_DEBUG_FLAGS;
+
+ /* Hook on the tunnel socket destructor so that we can cleanup
+ * if the tunnel socket goes away.
+ */
+ tunnel->old_sk_destruct = sk->sk_destruct;
+ sk->sk_destruct = &pppol2tp_tunnel_destruct;
+
+ tunnel->sock = sk;
+ sk->sk_allocation = GFP_ATOMIC;
+
+ /* Misc init */
+ rwlock_init(&tunnel->hlist_lock);
+
+ /* Add tunnel to our list */
+ INIT_LIST_HEAD(&tunnel->list);
+ write_lock(&pppol2tp_tunnel_list_lock);
+ list_add(&tunnel->list, &pppol2tp_tunnel_list);
+ write_unlock(&pppol2tp_tunnel_list_lock);
+ atomic_inc(&pppol2tp_tunnel_count);
+
+ /* Bump the reference count. The tunnel context is deleted
+ * only when this drops to zero.
+ */
+ pppol2tp_tunnel_inc_refcount(tunnel);
+
+ /* Mark socket as an encapsulation socket. See net/ipv4/udp.c */
+ (udp_sk(sk))->encap_type = UDP_ENCAP_L2TPINUDP;
+ (udp_sk(sk))->encap_rcv = pppol2tp_udp_encap_recv;
+
+ ret = tunnel->sock;
+
+ *error = 0;
+out:
+ if (sock)
+ sockfd_put(sock);
+
+ return ret;
+
+err:
+ *error = err;
+ goto out;
+}
+
+static struct proto pppol2tp_sk_proto = {
+ .name = "PPPOL2TP",
+ .owner = THIS_MODULE,
+ .obj_size = sizeof(struct pppox_sock),
+};
+
+/* socket() handler. Initialize a new struct sock.
+ */
+static int pppol2tp_create(struct socket *sock)
+{
+ int error = -ENOMEM;
+ struct sock *sk;
+
+ sk = sk_alloc(PF_PPPOX, GFP_KERNEL, &pppol2tp_sk_proto, 1);
+ if (!sk)
+ goto out;
+
+ sock_init_data(sock, sk);
+
+ sock->state = SS_UNCONNECTED;
+ sock->ops = &pppol2tp_ops;
+
+ sk->sk_backlog_rcv = pppol2tp_recv_core;
+ sk->sk_protocol = PX_PROTO_OL2TP;
+ sk->sk_family = PF_PPPOX;
+ sk->sk_state = PPPOX_NONE;
+ sk->sk_type = SOCK_STREAM;
+ sk->sk_destruct = pppol2tp_session_destruct;
+
+ error = 0;
+
+out:
+ return error;
+}
+
+/* connect() handler. Attach a PPPoX socket to a tunnel UDP socket
+ */
+static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr,
+ int sockaddr_len, int flags)
+{
+ struct sock *sk = sock->sk;
+ struct sockaddr_pppol2tp *sp = (struct sockaddr_pppol2tp *) uservaddr;
+ struct pppox_sock *po = pppox_sk(sk);
+ struct sock *tunnel_sock = NULL;
+ struct pppol2tp_session *session = NULL;
+ struct pppol2tp_tunnel *tunnel;
+ struct dst_entry *dst;
+ int error = 0;
+
+ lock_sock(sk);
+
+ error = -EINVAL;
+ if (sp->sa_protocol != PX_PROTO_OL2TP)
+ goto end;
+
+ /* Check for already bound sockets */
+ error = -EBUSY;
+ if (sk->sk_state & PPPOX_CONNECTED)
+ goto end;
+
+ /* We don't supporting rebinding anyway */
+ error = -EALREADY;
+ if (sk->sk_user_data)
+ goto end; /* socket is already attached */
+
+ /* Don't bind if s_tunnel is 0 */
+ error = -EINVAL;
+ if (sp->pppol2tp.s_tunnel == 0)
+ goto end;
+
+ /* Special case: prepare tunnel socket if s_session and
+ * d_session is 0. Otherwise look up tunnel using supplied
+ * tunnel id.
+ */
+ if ((sp->pppol2tp.s_session == 0) && (sp->pppol2tp.d_session == 0)) {
+ tunnel_sock = pppol2tp_prepare_tunnel_socket(sp->pppol2tp.fd,
+ sp->pppol2tp.s_tunnel,
+ &error);
+ if (tunnel_sock == NULL)
+ goto end;
+
+ tunnel = tunnel_sock->sk_user_data;
+ } else {
+ tunnel = pppol2tp_tunnel_find(sp->pppol2tp.s_tunnel);
+
+ /* Error if we can't find the tunnel */
+ error = -ENOENT;
+ if (tunnel == NULL)
+ goto end;
+
+ tunnel_sock = tunnel->sock;
+ }
+
+ /* Check that this session doesn't already exist */
+ error = -EEXIST;
+ session = pppol2tp_session_find(tunnel, sp->pppol2tp.s_session);
+ if (session != NULL)
+ goto end;
+
+ /* Allocate and initialize a new session context. */
+ session = kzalloc(sizeof(struct pppol2tp_session), GFP_KERNEL);
+ if (session == NULL) {
+ error = -ENOMEM;
+ goto end;
+ }
+
+ skb_queue_head_init(&session->reorder_q);
+
+ session->magic = L2TP_SESSION_MAGIC;
+ session->owner = current->pid;
+ session->sock = sk;
+ session->tunnel = tunnel;
+ session->tunnel_sock = tunnel_sock;
+ session->tunnel_addr = sp->pppol2tp;
+ sprintf(&session->name[0], "sess %hu/%hu",
+ session->tunnel_addr.s_tunnel,
+ session->tunnel_addr.s_session);
+
+ session->stats.tunnel_id = session->tunnel_addr.s_tunnel;
+ session->stats.session_id = session->tunnel_addr.s_session;
+
+ INIT_HLIST_NODE(&session->hlist);
+
+ /* Inherit debug options from tunnel */
+ session->debug = tunnel->debug;
+
+ /* Default MTU must allow space for UDP/L2TP/PPP
+ * headers.
+ */
+ session->mtu = session->mru = 1500 - PPPOL2TP_HEADER_OVERHEAD;
+
+ /* If PMTU discovery was enabled, use the MTU that was discovered */
+ dst = sk_dst_get(sk);
+ if (dst != NULL) {
+ u32 pmtu = dst_mtu(__sk_dst_get(sk));
+ if (pmtu != 0)
+ session->mtu = session->mru = pmtu -
+ PPPOL2TP_HEADER_OVERHEAD;
+ dst_release(dst);
+ }
+
+ /* Special case: if source & dest session_id == 0x0000, this socket is
+ * being created to manage the tunnel. Don't add the session to the
+ * session hash list, just set up the internal context for use by
+ * ioctl() and sockopt() handlers.
+ */
+ if ((session->tunnel_addr.s_session == 0) &&
+ (session->tunnel_addr.d_session == 0)) {
+ error = 0;
+ sk->sk_user_data = session;
+ goto out_no_ppp;
+ }
+
+ /* Get tunnel context from the tunnel socket */
+ tunnel = pppol2tp_sock_to_tunnel(tunnel_sock);
+ if (tunnel == NULL) {
+ error = -EBADF;
+ goto end;
+ }
+
+ /* Right now, because we don't have a way to push the incoming skb's
+ * straight through the UDP layer, the only header we need to worry
+ * about is the L2TP header. This size is different depending on
+ * whether sequence numbers are enabled for the data channel.
+ */
+ po->chan.hdrlen = PPPOL2TP_L2TP_HDR_SIZE_NOSEQ;
+
+ po->chan.private = sk;
+ po->chan.ops = &pppol2tp_chan_ops;
+ po->chan.mtu = session->mtu;
+
+ error = ppp_register_channel(&po->chan);
+ if (error)
+ goto end;
+
+ /* This is how we get the session context from the socket. */
+ sk->sk_user_data = session;
+
+ /* Add session to the tunnel's hash list */
+ write_lock(&tunnel->hlist_lock);
+ hlist_add_head(&session->hlist,
+ pppol2tp_session_id_hash(tunnel,
+ session->tunnel_addr.s_session));
+ write_unlock(&tunnel->hlist_lock);
+
+ atomic_inc(&pppol2tp_session_count);
+
+out_no_ppp:
+ pppol2tp_tunnel_inc_refcount(tunnel);
+ sk->sk_state = PPPOX_CONNECTED;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: created\n", session->name);
+
+end:
+ release_sock(sk);
+
+ if (error != 0)
+ PRINTK(session ? session->debug : -1, PPPOL2TP_MSG_CONTROL, KERN_WARNING,
+ "%s: connect failed: %d\n", session->name, error);
+
+ return error;
+}
+
+/* getname() support.
+ */
+static int pppol2tp_getname(struct socket *sock, struct sockaddr *uaddr,
+ int *usockaddr_len, int peer)
+{
+ int len = sizeof(struct sockaddr_pppol2tp);
+ struct sockaddr_pppol2tp sp;
+ int error = 0;
+ struct pppol2tp_session *session;
+
+ error = -ENOTCONN;
+ if (sock->sk->sk_state != PPPOX_CONNECTED)
+ goto end;
+
+ session = pppol2tp_sock_to_session(sock->sk);
+ if (session == NULL) {
+ error = -EBADF;
+ goto end;
+ }
+
+ sp.sa_family = AF_PPPOX;
+ sp.sa_protocol = PX_PROTO_OL2TP;
+ memcpy(&sp.pppol2tp, &session->tunnel_addr,
+ sizeof(struct pppol2tp_addr));
+
+ memcpy(uaddr, &sp, len);
+
+ *usockaddr_len = len;
+
+ error = 0;
+
+end:
+ return error;
+}
+
+/****************************************************************************
+ * ioctl() handlers.
+ *
+ * The PPPoX socket is created for L2TP sessions: tunnels have their own UDP
+ * sockets. However, in order to control kernel tunnel features, we allow
+ * userspace to create a special "tunnel" PPPoX socket which is used for
+ * control only. Tunnel PPPoX sockets have session_id == 0 and simply allow
+ * the user application to issue L2TP setsockopt(), getsockopt() and ioctl()
+ * calls.
+ ****************************************************************************/
+
+/* Session ioctl helper.
+ */
+static int pppol2tp_session_ioctl(struct pppol2tp_session *session,
+ unsigned int cmd, unsigned long arg)
+{
+ struct ifreq ifr;
+ int err = 0;
+ struct sock *sk = session->sock;
+ int val = (int) arg;
+
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_DEBUG,
+ "%s: pppol2tp_session_ioctl(cmd=%#x, arg=%#lx)\n",
+ session->name, cmd, arg);
+
+ sock_hold(sk);
+
+ switch (cmd) {
+ case SIOCGIFMTU:
+ err = -ENXIO;
+ if (!(sk->sk_state & PPPOX_CONNECTED))
+ break;
+
+ err = -EFAULT;
+ if (copy_from_user(&ifr, (void __user *) arg, sizeof(struct ifreq)))
+ break;
+ ifr.ifr_mtu = session->mtu;
+ if (copy_to_user((void __user *) arg, &ifr, sizeof(struct ifreq)))
+ break;
+
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get mtu=%d\n", session->name, session->mtu);
+ err = 0;
+ break;
+
+ case SIOCSIFMTU:
+ err = -ENXIO;
+ if (!(sk->sk_state & PPPOX_CONNECTED))
+ break;
+
+ err = -EFAULT;
+ if (copy_from_user(&ifr, (void __user *) arg, sizeof(struct ifreq)))
+ break;
+
+ session->mtu = ifr.ifr_mtu;
+
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: set mtu=%d\n", session->name, session->mtu);
+ err = 0;
+ break;
+
+ case PPPIOCGMRU:
+ err = -ENXIO;
+ if (!(sk->sk_state & PPPOX_CONNECTED))
+ break;
+
+ err = -EFAULT;
+ if (put_user(session->mru, (int __user *) arg))
+ break;
+
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get mru=%d\n", session->name, session->mru);
+ err = 0;
+ break;
+
+ case PPPIOCSMRU:
+ err = -ENXIO;
+ if (!(sk->sk_state & PPPOX_CONNECTED))
+ break;
+
+ err = -EFAULT;
+ if (get_user(val,(int __user *) arg))
+ break;
+
+ session->mru = val;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: set mru=%d\n", session->name, session->mru);
+ err = 0;
+ break;
+
+ case PPPIOCGFLAGS:
+ err = -EFAULT;
+ if (put_user(session->flags, (int __user *) arg))
+ break;
+
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get flags=%d\n", session->name, session->flags);
+ err = 0;
+ break;
+
+ case PPPIOCSFLAGS:
+ err = -EFAULT;
+ if (get_user(val, (int __user *) arg))
+ break;
+ session->flags = val;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: set flags=%d\n", session->name, session->flags);
+ err = 0;
+ break;
+
+ case PPPIOCGL2TPSTATS:
+ err = -ENXIO;
+ if (!(sk->sk_state & PPPOX_CONNECTED))
+ break;
+
+ if (copy_to_user((void __user *) arg, &session->stats,
+ sizeof(session->stats)))
+ break;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get L2TP stats\n", session->name);
+ err = 0;
+ break;
+
+ default:
+ err = -ENOSYS;
+ break;
+ }
+
+ sock_put(sk);
+
+ return err;
+}
+
+/* Tunnel ioctl helper.
+ *
+ * Note the special handling for PPPIOCGL2TPSTATS below. If the ioctl data
+ * specifies a session_id, the session ioctl handler is called. This allows an
+ * application to retrieve session stats via a tunnel socket.
+ */
+static int pppol2tp_tunnel_ioctl(struct pppol2tp_tunnel *tunnel,
+ unsigned int cmd, unsigned long arg)
+{
+ int err = 0;
+ struct sock *sk = tunnel->sock;
+ struct pppol2tp_ioc_stats stats_req;
+
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_DEBUG,
+ "%s: pppol2tp_tunnel_ioctl(cmd=%#x, arg=%#lx)\n", tunnel->name,
+ cmd, arg);
+
+ sock_hold(sk);
+
+ switch (cmd) {
+ case PPPIOCGL2TPSTATS:
+ err = -ENXIO;
+ if (!(sk->sk_state & PPPOX_CONNECTED))
+ break;
+
+ if (copy_from_user(&stats_req, (void __user *) arg,
+ sizeof(stats_req))) {
+ err = -EFAULT;
+ break;
+ }
+ if (stats_req.session_id != 0) {
+ /* resend to session ioctl handler */
+ struct pppol2tp_session *session =
+ pppol2tp_session_find(tunnel, stats_req.session_id);
+ if (session != NULL)
+ err = pppol2tp_session_ioctl(session, cmd, arg);
+ else
+ err = -EBADR;
+ break;
+ }
+#ifdef CONFIG_XFRM
+ tunnel->stats.using_ipsec = (sk->sk_policy[0] || sk->sk_policy[1]) ? 1 : 0;
+#endif
+ if (copy_to_user((void __user *) arg, &tunnel->stats,
+ sizeof(tunnel->stats))) {
+ err = -EFAULT;
+ break;
+ }
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get L2TP stats\n", tunnel->name);
+ err = 0;
+ break;
+
+ default:
+ err = -ENOSYS;
+ break;
+ }
+
+ sock_put(sk);
+
+ return err;
+}
+
+/* Main ioctl() handler.
+ * Dispatch to tunnel or session helpers depending on the socket.
+ */
+static int pppol2tp_ioctl(struct socket *sock, unsigned int cmd,
+ unsigned long arg)
+{
+ struct sock *sk = sock->sk;
+ struct pppol2tp_session *session;
+ struct pppol2tp_tunnel *tunnel;
+ int err;
+
+ if (!sk)
+ return 0;
+
+ err = -EBADF;
+ if (sock_flag(sk, SOCK_DEAD) != 0)
+ goto end;
+
+ err = -ENOTCONN;
+ if ((sk->sk_user_data == NULL) ||
+ (!(sk->sk_state & (PPPOX_CONNECTED | PPPOX_BOUND))))
+ goto end;
+
+ /* Get session context from the socket */
+ err = -EBADF;
+ session = pppol2tp_sock_to_session(sk);
+ if (session == NULL)
+ goto end;
+
+ /* Special case: if session's session_id is zero, treat ioctl as a
+ * tunnel ioctl
+ */
+ if ((session->tunnel_addr.s_session == 0) &&
+ (session->tunnel_addr.d_session == 0)) {
+ err = -EBADF;
+ tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
+ if (tunnel == NULL)
+ goto end;
+
+ err = pppol2tp_tunnel_ioctl(tunnel, cmd, arg);
+ goto end;
+ }
+
+ err = pppol2tp_session_ioctl(session, cmd, arg);
+
+end:
+ return err;
+}
+
+/*****************************************************************************
+ * setsockopt() / getsockopt() support.
+ *
+ * The PPPoX socket is created for L2TP sessions: tunnels have their own UDP
+ * sockets. In order to control kernel tunnel features, we allow userspace to
+ * create a special "tunnel" PPPoX socket which is used for control only.
+ * Tunnel PPPoX sockets have session_id == 0 and simply allow the user
+ * application to issue L2TP setsockopt(), getsockopt() and ioctl() calls.
+ *****************************************************************************/
+
+/* Tunnel setsockopt() helper.
+ */
+static int pppol2tp_tunnel_setsockopt(struct sock *sk,
+ struct pppol2tp_tunnel *tunnel,
+ int optname, int val)
+{
+ int err = 0;
+
+ switch (optname) {
+ case PPPOL2TP_SO_DEBUG:
+ tunnel->debug = val;
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: set debug=%x\n", tunnel->name, tunnel->debug);
+ break;
+
+ default:
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ return err;
+}
+
+/* Session setsockopt helper.
+ */
+static int pppol2tp_session_setsockopt(struct sock *sk,
+ struct pppol2tp_session *session,
+ int optname, int val)
+{
+ int err = 0;
+
+ switch (optname) {
+ case PPPOL2TP_SO_RECVSEQ:
+ if ((val != 0) && (val != 1)) {
+ err = -EINVAL;
+ break;
+ }
+ session->recv_seq = val ? -1 : 0;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: set recv_seq=%d\n", session->name,
+ session->recv_seq);
+ break;
+
+ case PPPOL2TP_SO_SENDSEQ:
+ if ((val != 0) && (val != 1)) {
+ err = -EINVAL;
+ break;
+ }
+ session->send_seq = val ? -1 : 0;
+ {
+ struct sock *ssk = session->sock;
+ struct pppox_sock *po = pppox_sk(ssk);
+ po->chan.hdrlen = val ? PPPOL2TP_L2TP_HDR_SIZE_SEQ :
+ PPPOL2TP_L2TP_HDR_SIZE_NOSEQ;
+ }
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: set send_seq=%d\n", session->name, session->send_seq);
+ break;
+
+ case PPPOL2TP_SO_LNSMODE:
+ if ((val != 0) && (val != 1)) {
+ err = -EINVAL;
+ break;
+ }
+ session->lns_mode = val ? -1 : 0;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: set lns_mode=%d\n", session->name,
+ session->lns_mode);
+ break;
+
+ case PPPOL2TP_SO_DEBUG:
+ session->debug = val;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: set debug=%x\n", session->name, session->debug);
+ break;
+
+ case PPPOL2TP_SO_REORDERTO:
+ session->reorder_timeout = msecs_to_jiffies(val);
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: set reorder_timeout=%d\n", session->name,
+ session->reorder_timeout);
+ break;
+
+ default:
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ return err;
+}
+
+/* Main setsockopt() entry point.
+ * Does API checks, then calls either the tunnel or session setsockopt
+ * handler, according to whether the PPPoL2TP socket is a for a regular
+ * session or the special tunnel type.
+ */
+static int pppol2tp_setsockopt(struct socket *sock, int level, int optname,
+ char __user *optval, int optlen)
+{
+ struct sock *sk = sock->sk;
+ struct pppol2tp_session *session = sk->sk_user_data;
+ struct pppol2tp_tunnel *tunnel;
+ int val;
+ int err;
+
+ if (level != SOL_PPPOL2TP)
+ return udp_prot.setsockopt(sk, level, optname, optval, optlen);
+
+ if (optlen < sizeof(int))
+ return -EINVAL;
+
+ if (get_user(val, (int __user *)optval))
+ return -EFAULT;
+
+ err = -ENOTCONN;
+ if (sk->sk_user_data == NULL)
+ goto end;
+
+ /* Get session context from the socket */
+ err = -EBADF;
+ session = pppol2tp_sock_to_session(sk);
+ if (session == NULL)
+ goto end;
+
+ /* Special case: if session_id == 0x0000, treat as operation on tunnel
+ */
+ if ((session->tunnel_addr.s_session == 0) &&
+ (session->tunnel_addr.d_session == 0)) {
+ err = -EBADF;
+ tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
+ if (tunnel == NULL)
+ goto end;
+
+ err = pppol2tp_tunnel_setsockopt(sk, tunnel, optname, val);
+ } else
+ err = pppol2tp_session_setsockopt(sk, session, optname, val);
+
+ err = 0;
+
+end:
+ return err;
+}
+
+/* Tunnel getsockopt helper. Called with sock locked.
+ */
+static int pppol2tp_tunnel_getsockopt(struct sock *sk,
+ struct pppol2tp_tunnel *tunnel,
+ int optname, int __user *val)
+{
+ int err = 0;
+
+ switch (optname) {
+ case PPPOL2TP_SO_DEBUG:
+ *val = tunnel->debug;
+ PRINTK(tunnel->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get debug=%x\n", tunnel->name, tunnel->debug);
+ break;
+
+ default:
+ err = -ENOPROTOOPT;
+ break;
+ }
+
+ return err;
+}
+
+/* Session getsockopt helper. Called with sock locked.
+ */
+static int pppol2tp_session_getsockopt(struct sock *sk,
+ struct pppol2tp_session *session,
+ int optname, int __user *val)
+{
+ int err = 0;
+
+ switch (optname) {
+ case PPPOL2TP_SO_RECVSEQ:
+ *val = session->recv_seq;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get recv_seq=%d\n", session->name, *val);
+ break;
+
+ case PPPOL2TP_SO_SENDSEQ:
+ *val = session->send_seq;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get send_seq=%d\n", session->name, *val);
+ break;
+
+ case PPPOL2TP_SO_LNSMODE:
+ *val = session->lns_mode;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get lns_mode=%d\n", session->name, *val);
+ break;
+
+ case PPPOL2TP_SO_DEBUG:
+ *val = session->debug;
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get debug=%d\n", session->name, *val);
+ break;
+
+ case PPPOL2TP_SO_REORDERTO:
+ *val = (int) jiffies_to_msecs(session->reorder_timeout);
+ PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
+ "%s: get reorder_timeout=%d\n", session->name, *val);
+ break;
+
+ default:
+ err = -ENOPROTOOPT;
+ }
+
+ return err;
+}
+
+/* Main getsockopt() entry point.
+ * Does API checks, then calls either the tunnel or session getsockopt
+ * handler, according to whether the PPPoX socket is a for a regular session
+ * or the special tunnel type.
+ */
+static int pppol2tp_getsockopt(struct socket *sock, int level,
+ int optname, char __user *optval, int __user *optlen)
+{
+ struct sock *sk = sock->sk;
+ struct pppol2tp_session *session = sk->sk_user_data;
+ struct pppol2tp_tunnel *tunnel;
+ int val, len;
+ int err;
+
+ if (level != SOL_PPPOL2TP)
+ return udp_prot.getsockopt(sk, level, optname, optval, optlen);
+
+ if (get_user(len, (int __user *) optlen))
+ return -EFAULT;
+
+ len = min_t(unsigned int, len, sizeof(int));
+
+ if (len < 0)
+ return -EINVAL;
+
+ err = -ENOTCONN;
+ if (sk->sk_user_data == NULL)
+ goto end;
+
+ /* Get the session context */
+ err = -EBADF;
+ session = pppol2tp_sock_to_session(sk);
+ if (session == NULL)
+ goto end;
+
+ /* Special case: if session_id == 0x0000, treat as operation on tunnel */
+ if ((session->tunnel_addr.s_session == 0) &&
+ (session->tunnel_addr.d_session == 0)) {
+ err = -EBADF;
+ tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
+ if (tunnel == NULL)
+ goto end;
+
+ err = pppol2tp_tunnel_getsockopt(sk, tunnel, optname, &val);
+ } else
+ err = pppol2tp_session_getsockopt(sk, session, optname, &val);
+
+ err = -EFAULT;
+ if (put_user(len, (int __user *) optlen))
+ goto end;
+
+ if (copy_to_user((void __user *) optval, &val, len))
+ goto end;
+
+ err = 0;
+end:
+ return err;
+}
+
+/*****************************************************************************
+ * /proc filesystem for debug
+ *****************************************************************************/
+
+#ifdef CONFIG_PROC_FS
+
+#include <linux/seq_file.h>
+
+struct pppol2tp_seq_data {
+ struct pppol2tp_tunnel *tunnel; /* current tunnel */
+ struct pppol2tp_session *session; /* NULL means get first session in tunnel */
+};
+
+static struct pppol2tp_session *next_session(struct pppol2tp_tunnel *tunnel, struct pppol2tp_session *curr)
+{
+ struct pppol2tp_session *session = NULL;
+ struct hlist_node *walk;
+ int found = 0;
+ int next = 0;
+ int i;
+
+ read_lock(&tunnel->hlist_lock);
+ for (i = 0; i < PPPOL2TP_HASH_SIZE; i++) {
+ hlist_for_each_entry(session, walk, &tunnel->session_hlist[i], hlist) {
+ if (curr == NULL) {
+ found = 1;
+ goto out;
+ }
+ if (session == curr) {
+ next = 1;
+ continue;
+ }
+ if (next) {
+ found = 1;
+ goto out;
+ }
+ }
+ }
+out:
+ read_unlock(&tunnel->hlist_lock);
+ if (!found)
+ session = NULL;
+
+ return session;
+}
+
+static struct pppol2tp_tunnel *next_tunnel(struct pppol2tp_tunnel *curr)
+{
+ struct pppol2tp_tunnel *tunnel = NULL;
+
+ read_lock(&pppol2tp_tunnel_list_lock);
+ if (list_is_last(&curr->list, &pppol2tp_tunnel_list)) {
+ goto out;
+ }
+ tunnel = list_entry(curr->list.next, struct pppol2tp_tunnel, list);
+out:
+ read_unlock(&pppol2tp_tunnel_list_lock);
+
+ return tunnel;
+}
+
+static void *pppol2tp_seq_start(struct seq_file *m, loff_t *offs)
+{
+ struct pppol2tp_seq_data *pd = SEQ_START_TOKEN;
+ loff_t pos = *offs;
+
+ if (!pos)
+ goto out;
+
+ BUG_ON(m->private == NULL);
+ pd = m->private;
+
+ if (pd->tunnel == NULL) {
+ if (!list_empty(&pppol2tp_tunnel_list))
+ pd->tunnel = list_entry(pppol2tp_tunnel_list.next, struct pppol2tp_tunnel, list);
+ } else {
+ pd->session = next_session(pd->tunnel, pd->session);
+ if (pd->session == NULL) {
+ pd->tunnel = next_tunnel(pd->tunnel);
+ }
+ }
+
+ /* NULL tunnel and session indicates end of list */
+ if ((pd->tunnel == NULL) && (pd->session == NULL))
+ pd = NULL;
+
+out:
+ return pd;
+}
+
+static void *pppol2tp_seq_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return NULL;
+}
+
+static void pppol2tp_seq_stop(struct seq_file *p, void *v)
+{
+ /* nothing to do */
+}
+
+static void pppol2tp_seq_tunnel_show(struct seq_file *m, void *v)
+{
+ struct pppol2tp_tunnel *tunnel = v;
+
+ seq_printf(m, "\nTUNNEL '%s', %c %d\n",
+ tunnel->name,
+ (tunnel == tunnel->sock->sk_user_data) ? 'Y':'N',
+ atomic_read(&tunnel->ref_count) - 1);
+ seq_printf(m, " %08x %llu/%llu/%llu %llu/%llu/%llu\n",
+ tunnel->debug,
+ tunnel->stats.tx_packets, tunnel->stats.tx_bytes,
+ tunnel->stats.tx_errors,
+ tunnel->stats.rx_packets, tunnel->stats.rx_bytes,
+ tunnel->stats.rx_errors);
+}
+
+static void pppol2tp_seq_session_show(struct seq_file *m, void *v)
+{
+ struct pppol2tp_session *session = v;
+
+ seq_printf(m, " SESSION '%s' %08X/%d %04X/%04X -> "
+ "%04X/%04X %d %c\n",
+ session->name,
+ ntohl(session->tunnel_addr.addr.sin_addr.s_addr),
+ ntohs(session->tunnel_addr.addr.sin_port),
+ session->tunnel_addr.s_tunnel,
+ session->tunnel_addr.s_session,
+ session->tunnel_addr.d_tunnel,
+ session->tunnel_addr.d_session,
+ session->sock->sk_state,
+ (session == session->sock->sk_user_data) ?
+ 'Y' : 'N');
+ seq_printf(m, " %d/%d/%c/%c/%s %08x %u\n",
+ session->mtu, session->mru,
+ session->recv_seq ? 'R' : '-',
+ session->send_seq ? 'S' : '-',
+ session->lns_mode ? "LNS" : "LAC",
+ session->debug,
+ jiffies_to_msecs(session->reorder_timeout));
+ seq_printf(m, " %hu/%hu %llu/%llu/%llu %llu/%llu/%llu\n",
+ session->nr, session->ns,
+ session->stats.tx_packets,
+ session->stats.tx_bytes,
+ session->stats.tx_errors,
+ session->stats.rx_packets,
+ session->stats.rx_bytes,
+ session->stats.rx_errors);
+}
+
+static int pppol2tp_seq_show(struct seq_file *m, void *v)
+{
+ struct pppol2tp_seq_data *pd = v;
+
+ /* display header on line 1 */
+ if (v == SEQ_START_TOKEN) {
+ seq_puts(m, "PPPoL2TP driver info, " PPPOL2TP_DRV_VERSION "\n");
+ seq_puts(m, "TUNNEL name, user-data-ok session-count\n");
+ seq_puts(m, " debug tx-pkts/bytes/errs rx-pkts/bytes/errs\n");
+ seq_puts(m, " SESSION name, addr/port src-tid/sid "
+ "dest-tid/sid state user-data-ok\n");
+ seq_puts(m, " mtu/mru/rcvseq/sendseq/lns debug reorderto\n");
+ seq_puts(m, " nr/ns tx-pkts/bytes/errs rx-pkts/bytes/errs\n");
+ goto out;
+ }
+
+ /* Show the tunnel or session context.
+ */
+ if (pd->session == NULL)
+ pppol2tp_seq_tunnel_show(m, pd->tunnel);
+ else
+ pppol2tp_seq_session_show(m, pd->session);
+
+out:
+ return 0;
+}
+
+static struct seq_operations pppol2tp_seq_ops = {
+ .start = pppol2tp_seq_start,
+ .next = pppol2tp_seq_next,
+ .stop = pppol2tp_seq_stop,
+ .show = pppol2tp_seq_show,
+};
+
+/* Called when our /proc file is opened. We allocate data for use when
+ * iterating our tunnel / session contexts and store it in the private
+ * data of the seq_file.
+ */
+static int pppol2tp_proc_open(struct inode *inode, struct file *file)
+{
+ struct seq_file *m;
+ struct pppol2tp_seq_data *pd;
+ int ret = 0;
+
+ ret = seq_open(file, &pppol2tp_seq_ops);
+ if (ret < 0)
+ goto out;
+
+ m = file->private_data;
+
+ /* Allocate and fill our proc_data for access later */
+ ret = -ENOMEM;
+ m->private = kzalloc(sizeof(struct pppol2tp_seq_data), GFP_KERNEL);
+ if (m->private == NULL)
+ goto out;
+
+ pd = m->private;
+ ret = 0;
+
+out:
+ return ret;
+}
+
+/* Called when /proc file access completes.
+ */
+static int pppol2tp_proc_release(struct inode *inode, struct file *file)
+{
+ struct seq_file *m = (struct seq_file *)file->private_data;
+
+ kfree(m->private);
+ m->private = NULL;
+
+ return seq_release(inode, file);
+}
+
+static struct file_operations pppol2tp_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = pppol2tp_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = pppol2tp_proc_release,
+};
+
+static struct proc_dir_entry *pppol2tp_proc;
+
+#endif /* CONFIG_PROC_FS */
+
+/*****************************************************************************
+ * Init and cleanup
+ *****************************************************************************/
+
+static struct proto_ops pppol2tp_ops = {
+ .family = AF_PPPOX,
+ .owner = THIS_MODULE,
+ .release = pppol2tp_release,
+ .bind = sock_no_bind,
+ .connect = pppol2tp_connect,
+ .socketpair = sock_no_socketpair,
+ .accept = sock_no_accept,
+ .getname = pppol2tp_getname,
+ .poll = datagram_poll,
+ .listen = sock_no_listen,
+ .shutdown = sock_no_shutdown,
+ .setsockopt = pppol2tp_setsockopt,
+ .getsockopt = pppol2tp_getsockopt,
+ .sendmsg = pppol2tp_sendmsg,
+ .recvmsg = pppol2tp_recvmsg,
+ .mmap = sock_no_mmap,
+ .ioctl = pppox_ioctl,
+};
+
+static struct pppox_proto pppol2tp_proto = {
+ .create = pppol2tp_create,
+ .ioctl = pppol2tp_ioctl
+};
+
+static int __init pppol2tp_init(void)
+{
+ int err;
+
+ err = proto_register(&pppol2tp_sk_proto, 0);
+ if (err)
+ goto out;
+ err = register_pppox_proto(PX_PROTO_OL2TP, &pppol2tp_proto);
+ if (err)
+ goto out_unregister_pppol2tp_proto;
+
+#ifdef CONFIG_PROC_FS
+ pppol2tp_proc = create_proc_entry("pppol2tp", 0, proc_net);
+ if (!pppol2tp_proc) {
+ err = -ENOMEM;
+ goto out_unregister_pppox_proto;
+ }
+ pppol2tp_proc->proc_fops = &pppol2tp_proc_fops;
+#endif /* CONFIG_PROC_FS */
+ printk(KERN_INFO "PPPoL2TP kernel driver, %s\n",
+ PPPOL2TP_DRV_VERSION);
+
+out:
+ return err;
+
+out_unregister_pppox_proto:
+ unregister_pppox_proto(PX_PROTO_OL2TP);
+out_unregister_pppol2tp_proto:
+ proto_unregister(&pppol2tp_sk_proto);
+ goto out;
+}
+
+static void __exit pppol2tp_exit(void)
+{
+ unregister_pppox_proto(PX_PROTO_OL2TP);
+
+#ifdef CONFIG_PROC_FS
+ remove_proc_entry("pppol2tp", proc_net);
+#endif
+ proto_unregister(&pppol2tp_sk_proto);
+}
+
+module_init(pppol2tp_init);
+module_exit(pppol2tp_exit);
+
+MODULE_AUTHOR("Martijn van Oosterhout <kleptog@svana.org>,"
+ "James Chapman <jchapman@katalix.com>");
+MODULE_DESCRIPTION("PPP over L2TP over UDP");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(PPPOL2TP_DRV_VERSION);
* SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
*/
if ((nic->device_type == XFRAME_I_DEVICE) &&
- (get_xena_rev_id(nic->pdev) < 4))
+ (nic->pdev->revision < 4))
writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
val64 = readq(&bar0->tx_fifo_partition_0);
herc = (sp->device_type == XFRAME_II_DEVICE);
if (flag == FALSE) {
- if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
+ if ((!herc && (sp->pdev->revision >= 4)) || herc) {
if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
ret = 1;
} else {
ret = 1;
}
} else {
- if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
+ if ((!herc && (sp->pdev->revision >= 4)) || herc) {
if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
ADAPTER_STATUS_RMAC_PCC_IDLE))
ret = 1;
sp->start_time = jiffies;
}
-/**
- * get_xena_rev_id - to identify revision ID of xena.
- * @pdev : PCI Dev structure
- * Description:
- * Function to identify the Revision ID of xena.
- * Return value:
- * returns the revision ID of the device.
- */
-
-static int get_xena_rev_id(struct pci_dev *pdev)
-{
- u8 id = 0;
- int ret;
- ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
- return id;
-}
-
/**
* s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
* @sp : private member of the device structure, which is a pointer to the
s2io_vpd_read(sp);
DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2007 Neterion Inc.\n");
DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n",dev->name,
- sp->product_name, get_xena_rev_id(sp->pdev));
+ sp->product_name, pdev->revision);
DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
s2io_driver_version);
DBG_PRINT(ERR_DBG, "%s: MAC ADDR: "
static int s2io_set_swapper(struct s2io_nic * sp);
static void s2io_card_down(struct s2io_nic *nic);
static int s2io_card_up(struct s2io_nic *nic);
-static int get_xena_rev_id(struct pci_dev *pdev);
static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
int bit_state);
static int s2io_add_isr(struct s2io_nic * sp);
lp->stats.rx_packets++;
skb_reserve(skb, 2); /* 16 byte align */
skb_put(skb, len); /* make room */
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
(unsigned char *) pData,
- len, 0);
+ len);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
skb_put(skb, len);
/* Copy out of kseg1 to avoid silly cache flush. */
- eth_copy_and_sum(skb, pkt_pointer + 2, len, 0);
+ skb_copy_to_linear_data(skb, pkt_pointer + 2, len);
skb->protocol = eth_type_trans(skb, dev);
/* We don't want to receive our own packets */
skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN);
if (skb) {
skb_reserve(skb, NET_IP_ALIGN);
- eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0);
+ skb_copy_to_linear_data(skb, sk_buff[0]->data, pkt_size);
*sk_buff = skb;
sis190_give_to_asic(desc, rx_buf_sz);
ret = 0;
pci_set_master(pdev);
/* enable MWI -- it vastly improves Rx performance on sparc64 */
- pci_set_mwi(pdev);
+ pci_try_set_mwi(pdev);
#ifdef ZEROCOPY
/* Starfire can do TCP/UDP checksumming */
pci_dma_sync_single_for_cpu(np->pci_dev,
np->rx_info[entry].mapping,
pkt_len, PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb, np->rx_info[entry].skb->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb, np->rx_info[entry].skb->data, pkt_len);
pci_dma_sync_single_for_device(np->pci_dev,
np->rx_info[entry].mapping,
pkt_len, PCI_DMA_FROMDEVICE);
{
skb_reserve(skb,2);
skb_put(skb,totlen);
- eth_copy_and_sum(skb,(char *) p->base+swab32((unsigned long) rbd->buffer),totlen,0);
+ skb_copy_to_linear_data(skb,(char *) p->base+swab32((unsigned long) rbd->buffer),totlen);
skb->protocol=eth_type_trans(skb,dev);
netif_rx(skb);
p->stats.rx_packets++;
skb_reserve( skb, 2 ); /* 16 byte align */
skb_put( skb, pkt_len ); /* Make room */
-// skb_copy_to_linear_data(skb, PKTBUF_ADDR(head), pkt_len);
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
PKTBUF_ADDR(head),
- pkt_len, 0);
+ pkt_len);
skb->protocol = eth_type_trans( skb, dev );
netif_rx( skb );
sbus_dma_sync_single_for_cpu(bp->bigmac_sdev,
this->rx_addr, len,
SBUS_DMA_FROMDEVICE);
- eth_copy_and_sum(copy_skb, (unsigned char *)skb->data, len, 0);
+ skb_copy_to_linear_data(copy_skb, (unsigned char *)skb->data, len);
sbus_dma_sync_single_for_device(bp->bigmac_sdev,
this->rx_addr, len,
SBUS_DMA_FROMDEVICE);
unsigned char phys[MII_CNT]; /* MII device addresses, only first one used. */
struct pci_dev *pci_dev;
void __iomem *base;
- unsigned char pci_rev_id;
};
/* The station address location in the EEPROM. */
dev->change_mtu = &change_mtu;
pci_set_drvdata(pdev, dev);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &np->pci_rev_id);
-
i = register_netdev(dev);
if (i)
goto err_out_unmap_rx;
iowrite8(100, ioaddr + RxDMAPollPeriod);
iowrite8(127, ioaddr + TxDMAPollPeriod);
/* Fix DFE-580TX packet drop issue */
- if (np->pci_rev_id >= 0x14)
+ if (np->pci_dev->revision >= 0x14)
iowrite8(0x01, ioaddr + DebugCtrl1);
netif_start_queue(dev);
hw_frame_id = ioread8(ioaddr + TxFrameId);
}
- if (np->pci_rev_id >= 0x14) {
+ if (np->pci_dev->revision >= 0x14) {
spin_lock(&np->lock);
for (; np->cur_tx - np->dirty_tx > 0; np->dirty_tx++) {
int entry = np->dirty_tx % TX_RING_SIZE;
np->rx_buf_sz,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb, np->rx_skbuff[entry]->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
pci_dma_sync_single_for_device(np->pci_dev,
desc->frag[0].addr,
np->rx_buf_sz,
#ifdef CONFIG_SPARC
hp->hm_revision = of_getintprop_default(dp, "hm-rev", 0xff);
- if (hp->hm_revision == 0xff) {
- unsigned char prev;
-
- pci_read_config_byte(pdev, PCI_REVISION_ID, &prev);
- hp->hm_revision = 0xc0 | (prev & 0x0f);
- }
+ if (hp->hm_revision == 0xff)
+ hp->hm_revision = 0xc0 | (pdev->revision & 0x0f);
#else
/* works with this on non-sparc hosts */
hp->hm_revision = 0x20;
skb_reserve(skb, 2); /* 16 byte align */
skb_put(skb, len); /* make room */
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
(unsigned char *)&(ib->rx_buf [entry][0]),
- len, 0);
+ len);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
} else {
skb_reserve(skb, 2);
skb_put(skb, len);
- eth_copy_and_sum(skb, (unsigned char *) this_qbuf,
- len, 0);
+ skb_copy_to_linear_data(skb, (unsigned char *) this_qbuf,
+ len);
skb->protocol = eth_type_trans(skb, qep->dev);
netif_rx(skb);
qep->dev->last_rx = jiffies;
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.77"
-#define DRV_MODULE_RELDATE "May 31, 2007"
+#define DRV_MODULE_VERSION "3.78"
+#define DRV_MODULE_RELDATE "July 11, 2007"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
return ret;
}
+static void tg3_phy_toggle_automdix(struct tg3 *tp, int enable)
+{
+ u32 phy;
+
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) ||
+ (tp->tg3_flags2 & TG3_FLG2_ANY_SERDES))
+ return;
+
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
+ u32 ephy;
+
+ if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &ephy)) {
+ tg3_writephy(tp, MII_TG3_EPHY_TEST,
+ ephy | MII_TG3_EPHY_SHADOW_EN);
+ if (!tg3_readphy(tp, MII_TG3_EPHYTST_MISCCTRL, &phy)) {
+ if (enable)
+ phy |= MII_TG3_EPHYTST_MISCCTRL_MDIX;
+ else
+ phy &= ~MII_TG3_EPHYTST_MISCCTRL_MDIX;
+ tg3_writephy(tp, MII_TG3_EPHYTST_MISCCTRL, phy);
+ }
+ tg3_writephy(tp, MII_TG3_EPHY_TEST, ephy);
+ }
+ } else {
+ phy = MII_TG3_AUXCTL_MISC_RDSEL_MISC |
+ MII_TG3_AUXCTL_SHDWSEL_MISC;
+ if (!tg3_writephy(tp, MII_TG3_AUX_CTRL, phy) &&
+ !tg3_readphy(tp, MII_TG3_AUX_CTRL, &phy)) {
+ if (enable)
+ phy |= MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
+ else
+ phy &= ~MII_TG3_AUXCTL_MISC_FORCE_AMDIX;
+ phy |= MII_TG3_AUXCTL_MISC_WREN;
+ tg3_writephy(tp, MII_TG3_AUX_CTRL, phy);
+ }
+ }
+}
+
static void tg3_phy_set_wirespeed(struct tg3 *tp)
{
u32 val;
}
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
- u32 phy_reg;
-
/* adjust output voltage */
tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x12);
-
- if (!tg3_readphy(tp, MII_TG3_EPHY_TEST, &phy_reg)) {
- u32 phy_reg2;
-
- tg3_writephy(tp, MII_TG3_EPHY_TEST,
- phy_reg | MII_TG3_EPHY_SHADOW_EN);
- /* Enable auto-MDIX */
- if (!tg3_readphy(tp, 0x10, &phy_reg2))
- tg3_writephy(tp, 0x10, phy_reg2 | 0x4000);
- tg3_writephy(tp, MII_TG3_EPHY_TEST, phy_reg);
- }
}
+ tg3_phy_toggle_automdix(tp, 1);
tg3_phy_set_wirespeed(tp);
return 0;
}
}
}
+static int tg3_5700_link_polarity(struct tg3 *tp, u32 speed)
+{
+ if (tp->led_ctrl == LED_CTRL_MODE_PHY_2)
+ return 1;
+ else if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411) {
+ if (speed != SPEED_10)
+ return 1;
+ } else if (speed == SPEED_10)
+ return 1;
+
+ return 0;
+}
+
static int tg3_setup_phy(struct tg3 *, int);
#define RESET_KIND_SHUTDOWN 0
else
mac_mode = MAC_MODE_PORT_MODE_MII;
- if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 ||
- !(tp->tg3_flags & TG3_FLAG_WOL_SPEED_100MB))
- mac_mode |= MAC_MODE_LINK_POLARITY;
+ mac_mode |= tp->mac_mode & MAC_MODE_LINK_POLARITY;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) ==
+ ASIC_REV_5700) {
+ u32 speed = (tp->tg3_flags &
+ TG3_FLAG_WOL_SPEED_100MB) ?
+ SPEED_100 : SPEED_10;
+ if (tg3_5700_link_polarity(tp, speed))
+ mac_mode |= MAC_MODE_LINK_POLARITY;
+ else
+ mac_mode &= ~MAC_MODE_LINK_POLARITY;
+ }
} else {
mac_mode = MAC_MODE_PORT_MODE_TBI;
}
if (tp->link_config.active_duplex == DUPLEX_HALF)
tp->mac_mode |= MAC_MODE_HALF_DUPLEX;
- tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
- if ((tp->led_ctrl == LED_CTRL_MODE_PHY_2) ||
- (current_link_up == 1 &&
- tp->link_config.active_speed == SPEED_10))
- tp->mac_mode |= MAC_MODE_LINK_POLARITY;
- } else {
- if (current_link_up == 1)
+ if (current_link_up == 1 &&
+ tg3_5700_link_polarity(tp, tp->link_config.active_speed))
tp->mac_mode |= MAC_MODE_LINK_POLARITY;
+ else
+ tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
}
/* ??? Without this setting Netgear GA302T PHY does not
tw32_f(MAC_MODE, (tp->mac_mode | MAC_MODE_SEND_CONFIGS));
udelay(40);
+
+ tw32_f(MAC_MODE, tp->mac_mode);
+ udelay(40);
}
out:
else
current_link_up = tg3_setup_fiber_by_hand(tp, mac_status);
- tp->mac_mode &= ~MAC_MODE_LINK_POLARITY;
- tw32_f(MAC_MODE, tp->mac_mode);
- udelay(40);
-
tp->hw_status->status =
(SD_STATUS_UPDATED |
(tp->hw_status->status & ~SD_STATUS_LINK_CHG));
*/
static inline void tg3_full_lock(struct tg3 *tp, int irq_sync)
{
+ spin_lock_bh(&tp->lock);
if (irq_sync)
tg3_irq_quiesce(tp);
- spin_lock_bh(&tp->lock);
}
static inline void tg3_full_unlock(struct tg3 *tp)
tp->mac_mode = MAC_MODE_TXSTAT_ENABLE | MAC_MODE_RXSTAT_ENABLE |
MAC_MODE_TDE_ENABLE | MAC_MODE_RDE_ENABLE | MAC_MODE_FHDE_ENABLE;
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS) &&
+ !(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) &&
+ GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)
+ tp->mac_mode |= MAC_MODE_LINK_POLARITY;
tw32_f(MAC_MODE, tp->mac_mode | MAC_MODE_RXSTAT_CLEAR | MAC_MODE_TXSTAT_CLEAR);
udelay(40);
return 0;
mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
- MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY;
+ MAC_MODE_PORT_INT_LPBACK;
+ if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS))
+ mac_mode |= MAC_MODE_LINK_POLARITY;
if (tp->tg3_flags & TG3_FLAG_10_100_ONLY)
mac_mode |= MAC_MODE_PORT_MODE_MII;
else
phytest | MII_TG3_EPHY_SHADOW_EN);
if (!tg3_readphy(tp, 0x1b, &phy))
tg3_writephy(tp, 0x1b, phy & ~0x20);
- if (!tg3_readphy(tp, 0x10, &phy))
- tg3_writephy(tp, 0x10, phy & ~0x4000);
tg3_writephy(tp, MII_TG3_EPHY_TEST, phytest);
}
val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED100;
} else
val = BMCR_LOOPBACK | BMCR_FULLDPLX | BMCR_SPEED1000;
+ tg3_phy_toggle_automdix(tp, 0);
+
tg3_writephy(tp, MII_BMCR, val);
udelay(40);
- mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
- MAC_MODE_LINK_POLARITY;
+ mac_mode = tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5906) {
tg3_writephy(tp, MII_TG3_EPHY_PTEST, 0x1800);
mac_mode |= MAC_MODE_PORT_MODE_MII;
udelay(10);
tw32_f(MAC_RX_MODE, tp->rx_mode);
}
- if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401) {
- mac_mode &= ~MAC_MODE_LINK_POLARITY;
+ if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700) {
+ if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5401)
+ mac_mode &= ~MAC_MODE_LINK_POLARITY;
+ else if ((tp->phy_id & PHY_ID_MASK) == PHY_ID_BCM5411)
+ mac_mode |= MAC_MODE_LINK_POLARITY;
tg3_writephy(tp, MII_TG3_EXT_CTRL,
MII_TG3_EXT_CTRL_LNK3_LED_MODE);
}
/* Update RX_MODE_KEEP_VLAN_TAG bit in RX_MODE register. */
__tg3_set_rx_mode(dev);
- tg3_full_unlock(tp);
-
if (netif_running(dev))
tg3_netif_start(tp);
+
+ tg3_full_unlock(tp);
}
#endif
case FLASH_5755VENDOR_ATMEL_FLASH_1:
case FLASH_5755VENDOR_ATMEL_FLASH_2:
case FLASH_5755VENDOR_ATMEL_FLASH_3:
+ case FLASH_5755VENDOR_ATMEL_FLASH_5:
tp->nvram_jedecnum = JEDEC_ATMEL;
tp->tg3_flags |= TG3_FLAG_NVRAM_BUFFERED;
tp->tg3_flags2 |= TG3_FLG2_FLASH;
tp->nvram_pagesize = 264;
- if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_1)
+ if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_1 ||
+ nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_5)
tp->nvram_size = (protect ? 0x3e200 : 0x80000);
else if (nvcfg1 == FLASH_5755VENDOR_ATMEL_FLASH_2)
tp->nvram_size = (protect ? 0x1f200 : 0x40000);
continue;
}
if (pci_id->rev != PCI_ANY_ID) {
- u8 rev;
-
- pci_read_config_byte(bridge, PCI_REVISION_ID,
- &rev);
- if (rev > pci_id->rev)
+ if (bridge->revision > pci_id->rev)
continue;
}
if (bridge->subordinate &&
* checksumming.
*/
if ((tp->tg3_flags & TG3_FLAG_BROKEN_CHECKSUMS) == 0) {
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755 ||
GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5787)
- dev->features |= NETIF_F_HW_CSUM;
- else
- dev->features |= NETIF_F_IP_CSUM;
- dev->features |= NETIF_F_SG;
+ dev->features |= NETIF_F_IPV6_CSUM;
+
tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS;
} else
tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS;
#define FLASH_5755VENDOR_ATMEL_FLASH_2 0x03400002
#define FLASH_5755VENDOR_ATMEL_FLASH_3 0x03400000
#define FLASH_5755VENDOR_ATMEL_FLASH_4 0x00000003
+#define FLASH_5755VENDOR_ATMEL_FLASH_5 0x02000003
#define FLASH_5755VENDOR_ATMEL_EEPROM_64KHZ 0x03c00003
#define FLASH_5755VENDOR_ATMEL_EEPROM_376KHZ 0x03c00002
#define FLASH_5787VENDOR_ATMEL_EEPROM_64KHZ 0x03000003
#define MII_TG3_AUX_CTRL 0x18 /* auxilliary control register */
+#define MII_TG3_AUXCTL_MISC_WREN 0x8000
+#define MII_TG3_AUXCTL_MISC_FORCE_AMDIX 0x0200
+#define MII_TG3_AUXCTL_MISC_RDSEL_MISC 0x7000
+#define MII_TG3_AUXCTL_SHDWSEL_MISC 0x0007
+
#define MII_TG3_AUX_STAT 0x19 /* auxilliary status register */
#define MII_TG3_AUX_STAT_LPASS 0x0004
#define MII_TG3_AUX_STAT_SPDMASK 0x0700
#define MII_TG3_EPHY_TEST 0x1f /* 5906 PHY register */
#define MII_TG3_EPHY_SHADOW_EN 0x80
+#define MII_TG3_EPHYTST_MISCCTRL 0x10 /* 5906 EPHY misc ctrl shadow register */
+#define MII_TG3_EPHYTST_MISCCTRL_MDIX 0x4000
+
#define MII_TG3_TEST1 0x1e
#define MII_TG3_TEST1_TRIM_EN 0x0010
#define MII_TG3_TEST1_CRC_EN 0x8000
struct net_device *dev;
TLanPrivateInfo *priv;
- u8 pci_rev;
u16 device_id;
int reg, rc = -ENODEV;
goto err_out_free_dev;
}
- pci_read_config_byte ( pdev, PCI_REVISION_ID, &pci_rev);
-
for ( reg= 0; reg <= 5; reg ++ ) {
if (pci_resource_flags(pdev, reg) & IORESOURCE_IO) {
pci_io_base = pci_resource_start(pdev, reg);
dev->base_addr = pci_io_base;
dev->irq = pdev->irq;
- priv->adapterRev = pci_rev;
+ priv->adapterRev = pdev->revision;
pci_set_master(pdev);
pci_set_drvdata(pdev, dev);
u_short vendor, status;
u_int irq = 0, device;
u_long iobase = 0; /* Clear upper 32 bits in Alphas */
- int i, j, cfrv;
+ int i, j;
struct de4x5_private *lp = netdev_priv(dev);
struct list_head *walk;
/* Get the chip configuration revision register */
pb = this_dev->bus->number;
- pci_read_config_dword(this_dev, PCI_REVISION_ID, &cfrv);
/* Set the device number information */
lp->device = PCI_SLOT(this_dev->devfn);
/* Set the chipset information */
if (is_DC2114x) {
- device = ((cfrv & CFRV_RN) < DC2114x_BRK ? DC21142 : DC21143);
+ device = ((this_dev->revision & CFRV_RN) < DC2114x_BRK
+ ? DC21142 : DC21143);
}
lp->chipset = device;
}
/* Get the chip configuration revision register */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &lp->cfrv);
+ lp->cfrv = pdev->revision;
/* Set the device number information */
lp->device = dev_num;
udelay(5);
#define __CHK_IO_SIZE(pci_id, dev_rev) \
- (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x02000030) ) ? \
+ (( ((pci_id)==PCI_DM9132_ID) || ((dev_rev) >= 0x30) ) ? \
DM9102A_IO_SIZE: DM9102_IO_SIZE)
-#define CHK_IO_SIZE(pci_dev, dev_rev) \
- (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, dev_rev))
+#define CHK_IO_SIZE(pci_dev) \
+ (__CHK_IO_SIZE(((pci_dev)->device << 16) | (pci_dev)->vendor, \
+ (pci_dev)->revision))
/* Sten Check */
#define DEVICE net_device
struct dmfe_board_info {
u32 chip_id; /* Chip vendor/Device ID */
- u32 chip_revision; /* Chip revision */
+ u8 chip_revision; /* Chip revision */
struct DEVICE *next_dev; /* next device */
struct pci_dev *pdev; /* PCI device */
spinlock_t lock;
{
struct dmfe_board_info *db; /* board information structure */
struct net_device *dev;
- u32 dev_rev, pci_pmr;
+ u32 pci_pmr;
int i, err;
DMFE_DBUG(0, "dmfe_init_one()", 0);
goto err_out_disable;
}
- /* Read Chip revision */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
-
- if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev, dev_rev)) ) {
+ if (pci_resource_len(pdev, 0) < (CHK_IO_SIZE(pdev)) ) {
printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
err = -ENODEV;
goto err_out_disable;
db->chip_id = ent->driver_data;
db->ioaddr = pci_resource_start(pdev, 0);
- db->chip_revision = dev_rev;
+ db->chip_revision = pdev->revision;
db->wol_mode = 0;
db->pdev = pdev;
pci_read_config_dword(pdev, 0x50, &pci_pmr);
pci_pmr &= 0x70000;
- if ( (pci_pmr == 0x10000) && (dev_rev == 0x02000031) )
+ if ( (pci_pmr == 0x10000) && (db->chip_revision == 0x31) )
db->chip_type = 1; /* DM9102A E3 */
else
db->chip_type = 0;
/* CR6 operation mode decision */
if ( !chkmode || (db->chip_id == PCI_DM9132_ID) ||
- (db->chip_revision >= 0x02000030) ) {
+ (db->chip_revision >= 0x30) ) {
db->cr6_data |= DMFE_TXTH_256;
db->cr0_data = CR0_DEFAULT;
db->dm910x_chk_mode=4; /* Enter the normal mode */
tmp_cr12 = inb(db->ioaddr + DCR12); /* DM9102/DM9102A */
if ( ((db->chip_id == PCI_DM9102_ID) &&
- (db->chip_revision == 0x02000030)) ||
+ (db->chip_revision == 0x30)) ||
((db->chip_id == PCI_DM9132_ID) &&
- (db->chip_revision == 0x02000010)) ) {
+ (db->chip_revision == 0x10)) ) {
/* DM9102A Chip */
if (tmp_cr12 & 2)
link_ok = 0;
tp->rx_buffers[entry].mapping,
pkt_len, PCI_DMA_FROMDEVICE);
#if ! defined(__alpha__)
- eth_copy_and_sum(skb, tp->rx_buffers[entry].skb->data,
- pkt_len, 0);
+ skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
+ pkt_len);
skb_put(skb, pkt_len);
#else
memcpy(skb_put(skb, pkt_len),
tp->rx_buffers[entry].mapping,
pkt_len, PCI_DMA_FROMDEVICE);
#if ! defined(__alpha__)
- eth_copy_and_sum(skb, tp->rx_buffers[entry].skb->data,
- pkt_len, 0);
+ skb_copy_to_linear_data(skb, tp->rx_buffers[entry].skb->data,
+ pkt_len);
skb_put(skb, pkt_len);
#else
memcpy(skb_put(skb, pkt_len),
/* set or disable MWI in the standard PCI command bit.
* Check for the case where mwi is desired but not available
*/
- if (csr0 & MWI) pci_set_mwi(pdev);
+ if (csr0 & MWI) pci_try_set_mwi(pdev);
else pci_clear_mwi(pdev);
/* read result from hardware (in case bit refused to enable) */
};
static int last_irq;
static int multiport_cnt; /* For four-port boards w/one EEPROM */
- u8 chip_rev;
int i, irq;
unsigned short sum;
unsigned char *ee_data;
if (pdev->vendor == 0x1282 && pdev->device == 0x9100)
{
- u32 dev_rev;
/* Read Chip revision */
- pci_read_config_dword(pdev, PCI_REVISION_ID, &dev_rev);
- if(dev_rev < 0x02000030)
+ if (pdev->revision < 0x02000030)
{
printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
return -ENODEV;
if (!ioaddr)
goto err_out_free_res;
- pci_read_config_byte (pdev, PCI_REVISION_ID, &chip_rev);
-
/*
* initialize private data structure 'tp'
* it is zeroed and aligned in alloc_etherdev
tp->flags = tulip_tbl[chip_idx].flags;
tp->pdev = pdev;
tp->base_addr = ioaddr;
- tp->revision = chip_rev;
+ tp->revision = pdev->revision;
tp->csr0 = csr0;
spin_lock_init(&tp->lock);
spin_lock_init(&tp->mii_lock);
tulip_mwi_config (pdev, dev);
#else
/* MWI is broken for DC21143 rev 65... */
- if (chip_idx == DC21143 && chip_rev == 65)
+ if (chip_idx == DC21143 && pdev->revision == 65)
tp->csr0 &= ~MWI;
#endif
#else
"Port"
#endif
- " %#llx,", dev->name, chip_name, chip_rev,
+ " %#llx,", dev->name, chip_name, pdev->revision,
(unsigned long long) pci_resource_start(pdev, TULIP_BAR));
pci_set_drvdata(pdev, dev);
pci_dma_sync_single_for_cpu(np->pci_dev,np->rx_addr[entry],
np->rx_skbuff[entry]->len,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb, np->rx_skbuff[entry]->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb, np->rx_skbuff[entry]->data, pkt_len);
skb_put(skb, pkt_len);
pci_dma_sync_single_for_device(np->pci_dev,np->rx_addr[entry],
np->rx_skbuff[entry]->len,
{
struct net_device *dev = NULL;
struct xircom_private *private;
- unsigned char chip_rev;
unsigned long flags;
unsigned short tmp16;
enter("xircom_probe");
pci_read_config_word (pdev,PCI_STATUS, &tmp16);
pci_write_config_word (pdev, PCI_STATUS,tmp16);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
-
if (!request_region(pci_resource_start(pdev, 0), 128, "xircom_cb")) {
printk(KERN_ERR "xircom_probe: failed to allocate io-region\n");
return -ENODEV;
goto reg_fail;
}
- printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, chip_rev, pdev->irq);
+ printk(KERN_INFO "%s: Xircom cardbus revision %i at irq %i \n", dev->name, pdev->revision, pdev->irq);
/* start the transmitter to get a heartbeat */
/* TODO: send 2 dummy packets here */
transceiver_voodoo(private);
goto out;
}
skb_reserve(skb, 2);
- eth_copy_and_sum(skb, (unsigned char*)&card->rx_buffer[bufferoffset / 4], pkt_len, 0);
+ skb_copy_to_linear_data(skb, (unsigned char*)&card->rx_buffer[bufferoffset / 4], pkt_len);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
int chip_idx = id->driver_data;
long ioaddr;
int i;
- u8 chip_rev;
/* when built into the kernel, we only print version if device is found */
#ifndef MODULE
if (register_netdev(dev))
goto err_out_cleardev;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
printk(KERN_INFO "%s: %s rev %d at %#3lx,",
- dev->name, xircom_tbl[chip_idx].chip_name, chip_rev, ioaddr);
+ dev->name, xircom_tbl[chip_idx].chip_name, pdev->revision, ioaddr);
for (i = 0; i < 6; i++)
printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]);
printk(", IRQ %d.\n", dev->irq);
&& (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
skb_reserve(skb, 2); /* 16 byte align the IP header */
#if ! defined(__alpha__)
- eth_copy_and_sum(skb, bus_to_virt(tp->rx_ring[entry].buffer1),
- pkt_len, 0);
+ skb_copy_to_linear_data(skb, bus_to_virt(tp->rx_ring[entry].buffer1),
+ pkt_len);
skb_put(skb, pkt_len);
#else
memcpy(skb_put(skb, pkt_len),
init_waitqueue_head(&tun->read_wait);
tun->owner = -1;
+ tun->group = -1;
SET_MODULE_OWNER(dev);
dev->open = tun_net_open;
return -EBUSY;
/* Check permissions */
- if (tun->owner != -1 &&
- current->euid != tun->owner && !capable(CAP_NET_ADMIN))
+ if (((tun->owner != -1 &&
+ current->euid != tun->owner) ||
+ (tun->group != -1 &&
+ current->egid != tun->group)) &&
+ !capable(CAP_NET_ADMIN))
return -EPERM;
}
else if (__dev_get_by_name(ifr->ifr_name))
DBG(KERN_INFO "%s: owner set to %d\n", tun->dev->name, tun->owner);
break;
+ case TUNSETGROUP:
+ /* Set group of the device */
+ tun->group= (gid_t) arg;
+
+ DBG(KERN_INFO "%s: group set to %d\n", tun->dev->name, tun->group);
+ break;
+
case TUNSETLINK:
/* Only allow setting the type when the interface is down */
if (tun->dev->flags & IFF_UP) {
pci_dma_sync_single_for_cpu(tp->pdev, dma_addr,
PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(new_skb, skb->data, pkt_len, 0);
+ skb_copy_to_linear_data(new_skb, skb->data, pkt_len);
pci_dma_sync_single_for_device(tp->pdev, dma_addr,
PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
typhoon_resume(pdev);
return -EBUSY;
}
-
-static int
-typhoon_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable)
-{
- return pci_enable_wake(pdev, state, enable);
-}
#endif
static int __devinit
#ifdef CONFIG_PM
.suspend = typhoon_suspend,
.resume = typhoon_resume,
- .enable_wake = typhoon_enable_wake,
#endif
};
if (!(skb = dev_alloc_skb(pkt_len)))
return;
- eth_copy_and_sum(skb, pkt_start + pkt_offset, pkt_len, 0);
+ skb_copy_to_linear_data(skb, pkt_start + pkt_offset, pkt_len);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, catc->netdev);
skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
- eth_copy_and_sum(skb, kaweth->rx_buf + 2, pkt_len, 0);
+ skb_copy_to_linear_data(skb, kaweth->rx_buf + 2, pkt_len);
skb_put(skb, pkt_len);
struct net_device *dev;
struct rhine_private *rp;
int i, rc;
- u8 pci_rev;
u32 quirks;
long pioaddr;
long memaddr;
printk(version);
#endif
- pci_read_config_byte(pdev, PCI_REVISION_ID, &pci_rev);
-
io_size = 256;
phy_id = 0;
quirks = 0;
name = "Rhine";
- if (pci_rev < VTunknown0) {
+ if (pdev->revision < VTunknown0) {
quirks = rqRhineI;
io_size = 128;
}
- else if (pci_rev >= VT6102) {
+ else if (pdev->revision >= VT6102) {
quirks = rqWOL | rqForceReset;
- if (pci_rev < VT6105) {
+ if (pdev->revision < VT6105) {
name = "Rhine II";
quirks |= rqStatusWBRace; /* Rhine-II exclusive */
}
else {
phy_id = 1; /* Integrated PHY, phy_id fixed to 1 */
- if (pci_rev >= VT6105_B0)
+ if (pdev->revision >= VT6105_B0)
quirks |= rq6patterns;
- if (pci_rev < VT6105M)
+ if (pdev->revision < VT6105M)
name = "Rhine III";
else
name = "Rhine III (Management Adapter)";
rp->rx_buf_sz,
PCI_DMA_FROMDEVICE);
- eth_copy_and_sum(skb,
+ skb_copy_to_linear_data(skb,
rp->rx_skbuff[entry]->data,
- pkt_len, 0);
+ pkt_len);
skb_put(skb, pkt_len);
pci_dma_sync_single_for_device(rp->pdev,
rp->rx_skbuff_dma[entry],
static int __devinit velocity_get_pci_info(struct velocity_info *vptr, struct pci_dev *pdev)
{
- if (pci_read_config_byte(pdev, PCI_REVISION_ID, &vptr->rev_id) < 0)
- return -EIO;
+ vptr->rev_id = pdev->revision;
pci_set_master(pdev);
cpc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int first_time = 1;
- ucchar cpc_rev_id;
int err, eeprom_outdated = 0;
ucshort device_id;
pc300_t *card;
card->hw.falcsize = pci_resource_len(pdev, 4);
card->hw.plxphys = pci_resource_start(pdev, 5);
card->hw.plxsize = pci_resource_len(pdev, 5);
- pci_read_config_byte(pdev, PCI_REVISION_ID, &cpc_rev_id);
switch (device_id) {
case PCI_DEVICE_ID_PC300_RX_1:
}
#ifdef PC300_DEBUG_PCI
printk("cpc (bus=0x0%x,pci_id=0x%x,", pdev->bus->number, pdev->devfn);
- printk("rev_id=%d) IRQ%d\n", cpc_rev_id, card->hw.irq);
+ printk("rev_id=%d) IRQ%d\n", pdev->revision, card->hw.irq);
printk("cpc:found ramaddr=0x%08lx plxaddr=0x%08lx "
"ctladdr=0x%08lx falcaddr=0x%08lx\n",
card->hw.ramphys, card->hw.plxphys, card->hw.scaphys,
const struct pci_device_id *ent)
{
card_t *card;
- u8 rev_id;
u32 __iomem *p;
int i;
u32 ramsize;
return -ENOMEM;
}
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
const struct pci_device_id *ent)
{
card_t *card;
- u8 rev_id;
u32 __iomem *p;
int i;
u32 ramsize;
return -ENOMEM;
}
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
if (pci_resource_len(pdev, 0) != PCI200SYN_PLX_SIZE ||
pci_resource_len(pdev, 2) != PCI200SYN_SCA_SIZE ||
pci_resource_len(pdev, 3) < 16384) {
&bcm->board_type);
if (err)
goto err_iounmap;
- err = bcm43xx_pci_read_config16(bcm, PCI_REVISION_ID,
- &bcm->board_revision);
- if (err)
- goto err_iounmap;
+
+ bcm->board_revision = bcm->pci_dev->revision;
err = bcm43xx_chipset_attach(bcm);
if (err)
.suspend = prism2_pci_suspend,
.resume = prism2_pci_resume,
#endif /* CONFIG_PM */
- /* Linux 2.4.6 added save_state and enable_wake that are not used here
- */
};
.id_table = prism2_plx_id_table,
.probe = prism2_plx_probe,
.remove = prism2_plx_remove,
- .suspend = NULL,
- .resume = NULL,
- .enable_wake = NULL
};
.remove = prism54_remove,
.suspend = prism54_suspend,
.resume = prism54_resume,
- /* .enable_wake ; we don't support this yet */
};
/******************************************************************************
pci_set_master(pdev);
/* enable MWI */
- if (!pci_set_mwi(pdev))
- printk(KERN_INFO "%s: pci_set_mwi(pdev) succeeded\n", DRV_NAME);
+ pci_try_set_mwi(pdev);
/* setup the network device interface and its structure */
if (!(ndev = islpci_setup(pdev))) {
} else {
skb->dev = dev;
skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */
- eth_copy_and_sum(skb, (unsigned char *)&sig.daddr, 12, 0);
+ skb_copy_to_linear_data(skb, (unsigned char *)&sig.daddr, 12);
wl3501_receive(this, skb->data, pkt_len);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, dev);
if (skb == NULL)
break;
skb_reserve(skb, 2); /* 16 byte align the IP header */
- eth_copy_and_sum(skb, rx_skb->data, pkt_len, 0);
+ skb_copy_to_linear_data(skb, rx_skb->data, pkt_len);
skb_put(skb, pkt_len);
pci_dma_sync_single_for_device(yp->pci_dev, desc->addr,
yp->rx_buf_sz,
#define PDCS_ATTR(_name, _mode, _show, _store) \
struct subsys_attribute pdcs_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
#define PATHS_ATTR(_name, _mode, _show, _store) \
struct pdcspath_attribute paths_attr_##_name = { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE}, \
+ .attr = {.name = __stringify(_name), .mode = _mode}, \
.show = _show, \
.store = _store, \
};
# Cardbus & CompactPCI use setup-bus
obj-$(CONFIG_HOTPLUG) += setup-bus.o
-ifndef CONFIG_X86
-obj-y += syscall.o
-endif
+obj-$(CONFIG_PCI_SYSCALL) += syscall.o
ifeq ($(CONFIG_PCI_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
extern int acpiphp_enable_slot (struct acpiphp_slot *slot);
extern int acpiphp_disable_slot (struct acpiphp_slot *slot);
+extern int acpiphp_eject_slot (struct acpiphp_slot *slot);
extern u8 acpiphp_get_power_status (struct acpiphp_slot *slot);
extern u8 acpiphp_get_attention_status (struct acpiphp_slot *slot);
extern u8 acpiphp_get_latch_status (struct acpiphp_slot *slot);
static int disable_slot(struct hotplug_slot *hotplug_slot)
{
struct slot *slot = hotplug_slot->private;
+ int retval;
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
/* disable the specified slot */
- return acpiphp_disable_slot(slot->acpi_slot);
+ retval = acpiphp_disable_slot(slot->acpi_slot);
+ if (!retval)
+ retval = acpiphp_eject_slot(slot->acpi_slot);
+ return retval;
}
/**
* acpiphp_eject_slot - physically eject the slot
*/
-static int acpiphp_eject_slot(struct acpiphp_slot *slot)
+int acpiphp_eject_slot(struct acpiphp_slot *slot)
{
acpi_status status;
struct acpiphp_func *func;
(dev->class >> 8) == PCI_CLASS_BRIDGE_PCI)))
return;
+ if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
+ return;
+
pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE,
bridge->hpp.t0->cache_line_size);
pci_write_config_byte(dev, PCI_LATENCY_TIMER,
* ACPI event handlers
*/
+static acpi_status
+count_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ int *count = (int *)context;
+ struct acpiphp_bridge *bridge;
+
+ bridge = acpiphp_handle_to_bridge(handle);
+ if (bridge)
+ (*count)++;
+ return AE_OK ;
+}
+
+static acpi_status
+check_sub_bridges(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ struct acpiphp_bridge *bridge;
+ char objname[64];
+ struct acpi_buffer buffer = { .length = sizeof(objname),
+ .pointer = objname };
+
+ bridge = acpiphp_handle_to_bridge(handle);
+ if (bridge) {
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+ dbg("%s: re-enumerating slots under %s\n",
+ __FUNCTION__, objname);
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
+ acpiphp_check_bridge(bridge);
+ }
+ return AE_OK ;
+}
+
/**
* handle_hotplug_event_bridge - handle ACPI event on bridges
*
struct acpi_buffer buffer = { .length = sizeof(objname),
.pointer = objname };
struct acpi_device *device;
+ int num_sub_bridges = 0;
if (acpi_bus_get_device(handle, &device)) {
/* This bridge must have just been physically inserted */
}
bridge = acpiphp_handle_to_bridge(handle);
- if (!bridge) {
+ if (type == ACPI_NOTIFY_BUS_CHECK) {
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, ACPI_UINT32_MAX,
+ count_sub_bridges, &num_sub_bridges, NULL);
+ }
+
+ if (!bridge && !num_sub_bridges) {
err("cannot get bridge info\n");
return;
}
case ACPI_NOTIFY_BUS_CHECK:
/* bus re-enumerate */
dbg("%s: Bus check notify on %s\n", __FUNCTION__, objname);
- acpiphp_check_bridge(bridge);
+ if (bridge) {
+ dbg("%s: re-enumerating slots under %s\n",
+ __FUNCTION__, objname);
+ acpiphp_check_bridge(bridge);
+ }
+ if (num_sub_bridges)
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, handle,
+ ACPI_UINT32_MAX, check_sub_bridges, NULL, NULL);
break;
case ACPI_NOTIFY_DEVICE_CHECK:
static void ibm_handle_events(acpi_handle handle, u32 event, void *context);
static int ibm_get_table_from_acpi(char **bufp);
static ssize_t ibm_read_apci_table(struct kobject *kobj,
- char *buffer, loff_t pos, size_t size);
+ struct bin_attribute *bin_attr,
+ char *buffer, loff_t pos, size_t size);
static acpi_status __init ibm_find_acpi_device(acpi_handle handle,
u32 lvl, void *context, void **rv);
static int __init ibm_acpiphp_init(void);
static struct bin_attribute ibm_apci_table_attr = {
.attr = {
.name = "apci_table",
- .owner = THIS_MODULE,
.mode = S_IRUGO,
},
.read = ibm_read_apci_table,
* our solution is to only allow reading the table in all at once
**/
static ssize_t ibm_read_apci_table(struct kobject *kobj,
- char *buffer, loff_t pos, size_t size)
+ struct bin_attribute *bin_attr,
+ char *buffer, loff_t pos, size_t size)
{
int bytes_read = -EINVAL;
char *table = NULL;
#include <linux/smp_lock.h>
#include <asm/atomic.h>
#include <linux/delay.h>
+#include <linux/kthread.h>
#include "cpci_hotplug.h"
#define DRIVER_AUTHOR "Scott Murray <scottm@somanetworks.com>"
static atomic_t extracting;
int cpci_debug;
static struct cpci_hp_controller *controller;
-static struct semaphore event_semaphore; /* mutex for process loop (up if something to process) */
-static struct semaphore thread_exit; /* guard ensure thread has exited before calling it quits */
-static int thread_finished = 1;
+static struct task_struct *cpci_thread;
+static int thread_finished;
static int enable_slot(struct hotplug_slot *slot);
static int disable_slot(struct hotplug_slot *slot);
controller->ops->disable_irq();
/* Trigger processing by the event thread */
- dbg("Signal event_semaphore");
- up(&event_semaphore);
- dbg("exited cpci_hp_intr");
+ wake_up_process(cpci_thread);
return IRQ_HANDLED;
}
{
int rc;
- lock_kernel();
- daemonize("cpci_hp_eventd");
- unlock_kernel();
-
dbg("%s - event thread started", __FUNCTION__);
while (1) {
dbg("event thread sleeping");
- down_interruptible(&event_semaphore);
- dbg("event thread woken, thread_finished = %d",
- thread_finished);
- if (thread_finished || signal_pending(current))
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule();
+ if (kthread_should_stop())
break;
do {
rc = check_slots();
} else if (rc < 0) {
dbg("%s - error checking slots", __FUNCTION__);
thread_finished = 1;
- break;
+ goto out;
}
- } while (atomic_read(&extracting) && !thread_finished);
- if (thread_finished)
+ } while (atomic_read(&extracting) && !kthread_should_stop());
+ if (kthread_should_stop())
break;
/* Re-enable ENUM# interrupt */
dbg("%s - re-enabling irq", __FUNCTION__);
controller->ops->enable_irq();
}
- dbg("%s - event thread signals exit", __FUNCTION__);
- up(&thread_exit);
+ out:
return 0;
}
{
int rc;
- lock_kernel();
- daemonize("cpci_hp_polld");
- unlock_kernel();
-
while (1) {
- if (thread_finished || signal_pending(current))
+ if (kthread_should_stop() || signal_pending(current))
break;
if (controller->ops->query_enum()) {
do {
} else if (rc < 0) {
dbg("%s - error checking slots", __FUNCTION__);
thread_finished = 1;
- break;
+ goto out;
}
- } while (atomic_read(&extracting) && !thread_finished);
+ } while (atomic_read(&extracting) && !kthread_should_stop());
}
msleep(100);
}
- dbg("poll thread signals exit");
- up(&thread_exit);
+ out:
return 0;
}
static int
cpci_start_thread(void)
{
- int pid;
-
- /* initialize our semaphores */
- init_MUTEX_LOCKED(&event_semaphore);
- init_MUTEX_LOCKED(&thread_exit);
- thread_finished = 0;
-
if (controller->irq)
- pid = kernel_thread(event_thread, NULL, 0);
+ cpci_thread = kthread_run(event_thread, NULL, "cpci_hp_eventd");
else
- pid = kernel_thread(poll_thread, NULL, 0);
- if (pid < 0) {
+ cpci_thread = kthread_run(poll_thread, NULL, "cpci_hp_polld");
+ if (IS_ERR(cpci_thread)) {
err("Can't start up our thread");
- return -1;
+ return PTR_ERR(cpci_thread);
}
- dbg("Our thread pid = %d", pid);
+ thread_finished = 0;
return 0;
}
static void
cpci_stop_thread(void)
{
+ kthread_stop(cpci_thread);
thread_finished = 1;
- dbg("thread finish command given");
- if (controller->irq)
- up(&event_semaphore);
- dbg("wait for thread to exit");
- down(&thread_exit);
}
int
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME , ## arg)
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME , ## arg)
-#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
-
u8 cpci_get_attention_status(struct slot* slot)
{
u8 num_of_slots = 0;
u8 hp_slot = 0;
u8 device;
- u8 rev;
u8 bus_cap;
u16 temp_word;
u16 vendor_id;
}
dbg("Vendor ID: %x\n", vendor_id);
- rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
- dbg("revision: %d\n", rev);
- if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) {
+ dbg("revision: %d\n", pdev->revision);
+ if ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!pdev->revision)) {
err(msg_HPC_rev_error);
rc = -ENODEV;
goto err_disable_device;
* For Intel, each SSID bit identifies a PHP capability.
* Also Intel HPC's may have RID=0.
*/
- if ((rev > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
+ if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
if (rc) {
switch (subsystem_vid) {
case PCI_VENDOR_ID_COMPAQ:
- if (rev >= 0x13) { /* CIOBX */
+ if (pdev->revision >= 0x13) { /* CIOBX */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1;
ctrl->push_button = 1;
memcpy(ctrl->pci_bus, pdev->bus, sizeof(*ctrl->pci_bus));
ctrl->bus = pdev->bus->number;
- ctrl->rev = rev;
+ ctrl->rev = pdev->revision;
dbg("bus device function rev: %d %d %d %d\n", ctrl->bus,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), ctrl->rev);
u8 cap_base;
struct timer_list poll_timer;
volatile int cmd_busy;
+ spinlock_t lock;
};
#define INT_BUTTON_IGNORE 0
__FUNCTION__);
return;
}
+ /*
+ * After turning power off, we must wait for at least
+ * 1 second before taking any action that relies on
+ * power having been removed from the slot/adapter.
+ */
+ msleep(1000);
}
}
mutex_unlock(&p_slot->ctrl->crit_sect);
return -EINVAL;
}
+ /*
+ * After turning power off, we must wait for at least
+ * 1 second before taking any action that relies on
+ * power having been removed from the slot/adapter.
+ */
+ msleep(1000);
}
ret = remove_board(p_slot);
return retval;
}
-static int pcie_write_cmd(struct slot *slot, u16 cmd)
+/**
+ * pcie_write_cmd - Issue controller command
+ * @slot: slot to which the command is issued
+ * @cmd: command value written to slot control register
+ * @mask: bitmask of slot control register to be modified
+ */
+static int pcie_write_cmd(struct slot *slot, u16 cmd, u16 mask)
{
struct controller *ctrl = slot->ctrl;
int retval = 0;
u16 slot_status;
+ u16 slot_ctrl;
+ unsigned long flags;
DBG_ENTER_ROUTINE
__FUNCTION__);
}
- ctrl->cmd_busy = 1;
- retval = pciehp_writew(ctrl, SLOTCTRL, (cmd | CMD_CMPL_INTR_ENABLE));
+ spin_lock_irqsave(&ctrl->lock, flags);
+ retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (retval) {
- err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
- goto out;
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
+ goto out_spin_unlock;
}
+ slot_ctrl &= ~mask;
+ slot_ctrl |= ((cmd & mask) | CMD_CMPL_INTR_ENABLE);
+
+ ctrl->cmd_busy = 1;
+ retval = pciehp_writew(ctrl, SLOTCTRL, slot_ctrl);
+ if (retval)
+ err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
+
+ out_spin_unlock:
+ spin_unlock_irqrestore(&ctrl->lock, flags);
+
/*
* Wait for command completion.
*/
- retval = pcie_wait_cmd(ctrl);
+ if (!retval)
+ retval = pcie_wait_cmd(ctrl);
out:
mutex_unlock(&ctrl->ctrl_lock);
DBG_LEAVE_ROUTINE
static int hpc_toggle_emi(struct slot *slot)
{
- struct controller *ctrl = slot->ctrl;
- u16 slot_cmd = 0;
- u16 slot_ctrl;
- int rc = 0;
+ u16 slot_cmd;
+ u16 cmd_mask;
+ int rc;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n",
- __FUNCTION__);
- return rc;
- }
-
- slot_cmd = (slot_ctrl | EMI_CTRL);
- if (!pciehp_poll_mode)
+ slot_cmd = EMI_CTRL;
+ cmd_mask = EMI_CTRL;
+ if (!pciehp_poll_mode) {
slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
+ }
- pcie_write_cmd(slot, slot_cmd);
+ rc = pcie_write_cmd(slot, slot_cmd, cmd_mask);
slot->last_emi_toggle = get_seconds();
DBG_LEAVE_ROUTINE
return rc;
static int hpc_set_attention_status(struct slot *slot, u8 value)
{
struct controller *ctrl = slot->ctrl;
- u16 slot_cmd = 0;
- u16 slot_ctrl;
- int rc = 0;
+ u16 slot_cmd;
+ u16 cmd_mask;
+ int rc;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return rc;
- }
-
+ cmd_mask = ATTN_LED_CTRL;
switch (value) {
case 0 : /* turn off */
- slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x00C0;
+ slot_cmd = 0x00C0;
break;
case 1: /* turn on */
- slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x0040;
+ slot_cmd = 0x0040;
break;
case 2: /* turn blink */
- slot_cmd = (slot_ctrl & ~ATTN_LED_CTRL) | 0x0080;
+ slot_cmd = 0x0080;
break;
default:
return -1;
}
- if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ if (!pciehp_poll_mode) {
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
+ }
- pcie_write_cmd(slot, slot_cmd);
+ rc = pcie_write_cmd(slot, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl;
- int rc = 0;
+ u16 cmd_mask;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return;
+ slot_cmd = 0x0100;
+ cmd_mask = PWR_LED_CTRL;
+ if (!pciehp_poll_mode) {
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
- slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0100;
- if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
- pcie_write_cmd(slot, slot_cmd);
+ pcie_write_cmd(slot, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl;
- int rc = 0;
+ u16 cmd_mask;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return;
+ slot_cmd = 0x0300;
+ cmd_mask = PWR_LED_CTRL;
+ if (!pciehp_poll_mode) {
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
- slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0300;
-
- if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
- pcie_write_cmd(slot, slot_cmd);
+ pcie_write_cmd(slot, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl;
- int rc = 0;
+ u16 cmd_mask;
DBG_ENTER_ROUTINE
- rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (rc) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return;
+ slot_cmd = 0x0200;
+ cmd_mask = PWR_LED_CTRL;
+ if (!pciehp_poll_mode) {
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask | HP_INTR_ENABLE;
}
- slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0200;
-
- if (!pciehp_poll_mode)
- slot_cmd = slot_cmd | HP_INTR_ENABLE;
- pcie_write_cmd(slot, slot_cmd);
+ pcie_write_cmd(slot, slot_cmd, cmd_mask);
dbg("%s: SLOTCTRL %x write cmd %x\n",
__FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl, slot_status;
+ u16 cmd_mask;
+ u16 slot_status;
int retval = 0;
DBG_ENTER_ROUTINE
}
}
- retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (retval) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return retval;
- }
-
- slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_ON;
-
+ slot_cmd = POWER_ON;
+ cmd_mask = PWR_CTRL;
/* Enable detection that we turned off at slot power-off time */
- if (!pciehp_poll_mode)
+ if (!pciehp_poll_mode) {
slot_cmd = slot_cmd |
PWR_FAULT_DETECT_ENABLE |
MRL_DETECT_ENABLE |
PRSN_DETECT_ENABLE |
HP_INTR_ENABLE;
+ cmd_mask = cmd_mask |
+ PWR_FAULT_DETECT_ENABLE |
+ MRL_DETECT_ENABLE |
+ PRSN_DETECT_ENABLE |
+ HP_INTR_ENABLE;
+ }
- retval = pcie_write_cmd(slot, slot_cmd);
+ retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
if (retval) {
err("%s: Write %x command failed!\n", __FUNCTION__, slot_cmd);
{
struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
- u16 slot_ctrl;
+ u16 cmd_mask;
int retval = 0;
DBG_ENTER_ROUTINE
dbg("%s: slot->hp_slot %x\n", __FUNCTION__, slot->hp_slot);
- retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
- if (retval) {
- err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
- return retval;
- }
-
- slot_cmd = (slot_ctrl & ~PWR_CTRL) | POWER_OFF;
-
+ slot_cmd = POWER_OFF;
+ cmd_mask = PWR_CTRL;
/*
* If we get MRL or presence detect interrupts now, the isr
* will notice the sticky power-fault bit too and issue power
* of command completions, since the power-fault bit remains on
* till the slot is powered on again.
*/
- if (!pciehp_poll_mode)
+ if (!pciehp_poll_mode) {
slot_cmd = (slot_cmd &
~PWR_FAULT_DETECT_ENABLE &
~MRL_DETECT_ENABLE &
~PRSN_DETECT_ENABLE) | HP_INTR_ENABLE;
+ cmd_mask = cmd_mask |
+ PWR_FAULT_DETECT_ENABLE |
+ MRL_DETECT_ENABLE |
+ PRSN_DETECT_ENABLE |
+ HP_INTR_ENABLE;
+ }
- retval = pcie_write_cmd(slot, slot_cmd);
-
+ retval = pcie_write_cmd(slot, slot_cmd, cmd_mask);
if (retval) {
err("%s: Write command failed!\n", __FUNCTION__);
return -1;
u16 temp_word;
int hp_slot = 0; /* only 1 slot per PCI Express port */
int rc = 0;
+ unsigned long flags;
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc);
/* Mask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
+ spin_lock_irqsave(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
err("%s: Cannot read SLOT_CTRL register\n",
__FUNCTION__);
+ spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
if (rc) {
err("%s: Cannot write to SLOTCTRL register\n",
__FUNCTION__);
+ spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
+ spin_unlock_irqrestore(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
}
/* Unmask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
+ spin_lock_irqsave(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
err("%s: Cannot read SLOTCTRL register\n",
__FUNCTION__);
+ spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
if (rc) {
err("%s: Cannot write to SLOTCTRL register\n",
__FUNCTION__);
+ spin_unlock_irqrestore(&ctrl->lock, flags);
return IRQ_NONE;
}
+ spin_unlock_irqrestore(&ctrl->lock, flags);
rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
mutex_init(&ctrl->crit_sect);
mutex_init(&ctrl->ctrl_lock);
+ spin_lock_init(&ctrl->lock);
/* setup wait queue */
init_waitqueue_head(&ctrl->queue);
status = acpi_evaluate_object(handle, "_OSC", &input, &output);
if (ACPI_FAILURE (status)) {
- printk(KERN_DEBUG
- "Evaluate _OSC Set fails. Status = 0x%04x\n", status);
*ret_status = status;
return status;
}
in_params[3].buffer.pointer = (u8 *)context;
status = acpi_evaluate_object(handle, "_OSC", &input, &output);
- if (ACPI_FAILURE (status)) {
- printk(KERN_DEBUG
- "Evaluate _OSC Set fails. Status = 0x%04x\n", status);
+ if (ACPI_FAILURE (status))
return status;
- }
+
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
printk(KERN_DEBUG
};
static ssize_t
-pci_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_read_config(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct pci_dev *dev = to_pci_dev(container_of(kobj,struct device,kobj));
unsigned int size = 64;
}
static ssize_t
-pci_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_write_config(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct pci_dev *dev = to_pci_dev(container_of(kobj,struct device,kobj));
unsigned int size = count;
* callback routine (pci_legacy_read).
*/
ssize_t
-pci_read_legacy_io(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_read_legacy_io(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct pci_bus *bus = to_pci_bus(container_of(kobj,
struct class_device,
* callback routine (pci_legacy_write).
*/
ssize_t
-pci_write_legacy_io(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_write_legacy_io(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct pci_bus *bus = to_pci_bus(container_of(kobj,
struct class_device,
sprintf(res_attr_name, "resource%d", i);
res_attr->attr.name = res_attr_name;
res_attr->attr.mode = S_IRUSR | S_IWUSR;
- res_attr->attr.owner = THIS_MODULE;
res_attr->size = pci_resource_len(pdev, i);
res_attr->mmap = pci_mmap_resource;
res_attr->private = &pdev->resource[i];
* writing anything except 0 enables it
*/
static ssize_t
-pci_write_rom(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_write_rom(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj));
* device corresponding to @kobj.
*/
static ssize_t
-pci_read_rom(struct kobject *kobj, char *buf, loff_t off, size_t count)
+pci_read_rom(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj));
void __iomem *rom;
.attr = {
.name = "config",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 256,
.read = pci_read_config,
.attr = {
.name = "config",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 4096,
.read = pci_read_config,
.write = pci_write_config,
};
+int __attribute__ ((weak)) pcibios_add_platform_entries(struct pci_dev *dev)
+{
+ return 0;
+}
+
int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev)
{
struct bin_attribute *rom_attr = NULL;
rom_attr->size = pci_resource_len(pdev, PCI_ROM_RESOURCE);
rom_attr->attr.name = "rom";
rom_attr->attr.mode = S_IRUSR;
- rom_attr->attr.owner = THIS_MODULE;
rom_attr->read = pci_read_rom;
rom_attr->write = pci_write_rom;
retval = sysfs_create_bin_file(&pdev->dev.kobj, rom_attr);
}
}
/* add platform-specific attributes */
- pcibios_add_platform_entries(pdev);
+ if (pcibios_add_platform_entries(pdev))
+ goto err_rom_file;
return 0;
+err_rom_file:
+ if (pci_resource_len(pdev, PCI_ROM_RESOURCE))
+ sysfs_remove_bin_file(&pdev->dev.kobj, rom_attr);
err_rom:
kfree(rom_attr);
err_resource_files:
if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
return 0;
+ /* find PCI PM capability in list */
+ pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+
+ /* abort if the device doesn't support PM capabilities */
+ if (!pm)
+ return -EIO;
+
/* Validate current state:
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
return 0; /* we're already there */
- /* find PCI PM capability in list */
- pm = pci_find_capability(dev, PCI_CAP_ID_PM);
-
- /* abort if the device doesn't support PM capabilities */
- if (!pm)
- return -EIO;
-
pci_read_config_word(dev,pm + PCI_PM_PMC,&pmc);
if ((pmc & PCI_PM_CAP_VER_MASK) > 3) {
printk(KERN_DEBUG
return 0;
}
+int pci_try_set_mwi(struct pci_dev *dev)
+{
+ return 0;
+}
+
void pci_clear_mwi(struct pci_dev *dev)
{
}
* pci_set_mwi - enables memory-write-invalidate PCI transaction
* @dev: the PCI device for which MWI is enabled
*
- * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND,
- * and then calls @pcibios_set_mwi to do the needed arch specific
- * operations or a generic mwi-prep function.
+ * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
pci_read_config_word(dev, PCI_COMMAND, &cmd);
if (! (cmd & PCI_COMMAND_INVALIDATE)) {
- pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n", pci_name(dev));
+ pr_debug("PCI: Enabling Mem-Wr-Inval for device %s\n",
+ pci_name(dev));
cmd |= PCI_COMMAND_INVALIDATE;
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
}
+/**
+ * pci_try_set_mwi - enables memory-write-invalidate PCI transaction
+ * @dev: the PCI device for which MWI is enabled
+ *
+ * Enables the Memory-Write-Invalidate transaction in %PCI_COMMAND.
+ * Callers are not required to check the return value.
+ *
+ * RETURNS: An appropriate -ERRNO error value on error, or zero for success.
+ */
+int pci_try_set_mwi(struct pci_dev *dev)
+{
+ int rc = pci_set_mwi(dev);
+ return rc;
+}
+
/**
* pci_clear_mwi - disables Memory-Write-Invalidate for device dev
* @dev: the PCI device to disable
}
#endif
+/**
+ * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count
+ * @dev: PCI device to query
+ *
+ * Returns mmrbc: maximum designed memory read count in bytes
+ * or appropriate error value.
+ */
+int pcix_get_max_mmrbc(struct pci_dev *dev)
+{
+ int err, cap;
+ u32 stat;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!cap)
+ return -EINVAL;
+
+ err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
+ if (err)
+ return -EINVAL;
+
+ return (stat & PCI_X_STATUS_MAX_READ) >> 12;
+}
+EXPORT_SYMBOL(pcix_get_max_mmrbc);
+
+/**
+ * pcix_get_mmrbc - get PCI-X maximum memory read byte count
+ * @dev: PCI device to query
+ *
+ * Returns mmrbc: maximum memory read count in bytes
+ * or appropriate error value.
+ */
+int pcix_get_mmrbc(struct pci_dev *dev)
+{
+ int ret, cap;
+ u32 cmd;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!cap)
+ return -EINVAL;
+
+ ret = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
+ if (!ret)
+ ret = 512 << ((cmd & PCI_X_CMD_MAX_READ) >> 2);
+
+ return ret;
+}
+EXPORT_SYMBOL(pcix_get_mmrbc);
+
+/**
+ * pcix_set_mmrbc - set PCI-X maximum memory read byte count
+ * @dev: PCI device to query
+ * @mmrbc: maximum memory read count in bytes
+ * valid values are 512, 1024, 2048, 4096
+ *
+ * If possible sets maximum memory read byte count, some bridges have erratas
+ * that prevent this.
+ */
+int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc)
+{
+ int cap, err = -EINVAL;
+ u32 stat, cmd, v, o;
+
+ if (mmrbc < 512 || mmrbc > 4096 || (mmrbc & (mmrbc-1)))
+ goto out;
+
+ v = ffs(mmrbc) - 10;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX);
+ if (!cap)
+ goto out;
+
+ err = pci_read_config_dword(dev, cap + PCI_X_STATUS, &stat);
+ if (err)
+ goto out;
+
+ if (v > (stat & PCI_X_STATUS_MAX_READ) >> 21)
+ return -E2BIG;
+
+ err = pci_read_config_dword(dev, cap + PCI_X_CMD, &cmd);
+ if (err)
+ goto out;
+
+ o = (cmd & PCI_X_CMD_MAX_READ) >> 2;
+ if (o != v) {
+ if (v > o && dev->bus &&
+ (dev->bus->bus_flags & PCI_BUS_FLAGS_NO_MMRBC))
+ return -EIO;
+
+ cmd &= ~PCI_X_CMD_MAX_READ;
+ cmd |= v << 2;
+ err = pci_write_config_dword(dev, cap + PCI_X_CMD, cmd);
+ }
+out:
+ return err;
+}
+EXPORT_SYMBOL(pcix_set_mmrbc);
+
+/**
+ * pcie_get_readrq - get PCI Express read request size
+ * @dev: PCI device to query
+ *
+ * Returns maximum memory read request in bytes
+ * or appropriate error value.
+ */
+int pcie_get_readrq(struct pci_dev *dev)
+{
+ int ret, cap;
+ u16 ctl;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!cap)
+ return -EINVAL;
+
+ ret = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
+ if (!ret)
+ ret = 128 << ((ctl & PCI_EXP_DEVCTL_READRQ) >> 12);
+
+ return ret;
+}
+EXPORT_SYMBOL(pcie_get_readrq);
+
+/**
+ * pcie_set_readrq - set PCI Express maximum memory read request
+ * @dev: PCI device to query
+ * @count: maximum memory read count in bytes
+ * valid values are 128, 256, 512, 1024, 2048, 4096
+ *
+ * If possible sets maximum read byte count
+ */
+int pcie_set_readrq(struct pci_dev *dev, int rq)
+{
+ int cap, err = -EINVAL;
+ u16 ctl, v;
+
+ if (rq < 128 || rq > 4096 || (rq & (rq-1)))
+ goto out;
+
+ v = (ffs(rq) - 8) << 12;
+
+ cap = pci_find_capability(dev, PCI_CAP_ID_EXP);
+ if (!cap)
+ goto out;
+
+ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
+ if (err)
+ goto out;
+
+ if ((ctl & PCI_EXP_DEVCTL_READRQ) != v) {
+ ctl &= ~PCI_EXP_DEVCTL_READRQ;
+ ctl |= v;
+ err = pci_write_config_dword(dev, cap + PCI_EXP_DEVCTL, ctl);
+ }
+
+out:
+ return err;
+}
+EXPORT_SYMBOL(pcie_set_readrq);
+
/**
* pci_select_bars - Make BAR mask from the type of resource
* @dev: the PCI device for which BAR mask is made
EXPORT_SYMBOL(pci_request_selected_regions);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_set_mwi);
+EXPORT_SYMBOL(pci_try_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
EXPORT_SYMBOL_GPL(pci_intx);
EXPORT_SYMBOL(pci_set_dma_mask);
config PCIEAER
boolean "Root Port Advanced Error Reporting support"
- depends on PCIEPORTBUS && ACPI
+ depends on PCIEPORTBUS
default y
help
This enables PCI Express Root Port Advanced Error Reporting
obj-$(CONFIG_PCIEAER) += aerdriver.o
-aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o aerdrv_acpi.o
+aerdriver-objs := aerdrv_errprint.o aerdrv_core.o aerdrv.o
+aerdriver-$(CONFIG_ACPI) += aerdrv_acpi.o
* Initialize Root lock access, e_lock, to Root Error Status Reg,
* Root Error ID Reg, and Root error producer/consumer index.
*/
- rpc->e_lock = SPIN_LOCK_UNLOCKED;
+ spin_lock_init(&rpc->e_lock);
rpc->rpd = dev;
INIT_WORK(&rpc->dpc_handler, aer_isr);
#define AER_ERROR_MASK 0x001fffff
#define AER_ERROR(d) (d & AER_ERROR_MASK)
-#define OSC_METHOD_RUN_SUCCESS 0
-#define OSC_METHOD_NOT_SUPPORTED 1
-#define OSC_METHOD_RUN_FAILURE 2
-
/* Root Error Status Register Bits */
#define ROOT_ERR_STATUS_MASKS 0x0f
extern int aer_init(struct pcie_device *dev);
extern void aer_isr(struct work_struct *work);
extern void aer_print_error(struct pci_dev *dev, struct aer_err_info *info);
-extern int aer_osc_setup(struct pci_dev *dev);
+
+#ifdef CONFIG_ACPI
+extern int aer_osc_setup(struct pcie_device *pciedev);
+#else
+static inline int aer_osc_setup(struct pcie_device *pciedev)
+{
+ return 0;
+}
+#endif
#endif //_AERDRV_H_
/**
* aer_osc_setup - run ACPI _OSC method
+ * @pciedev: pcie_device which AER is being enabled on
*
- * Return:
- * Zero if success. Nonzero for otherwise.
+ * @return: Zero on success. Nonzero otherwise.
*
* Invoked when PCIE bus loads AER service driver. To avoid conflict with
* BIOS AER support requires BIOS to yield AER control to OS native driver.
**/
-int aer_osc_setup(struct pci_dev *dev)
+int aer_osc_setup(struct pcie_device *pciedev)
{
- int retval = OSC_METHOD_RUN_SUCCESS;
- acpi_status status;
- acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
- struct pci_dev *pdev = dev;
+ acpi_status status = AE_NOT_FOUND;
+ struct pci_dev *pdev = pciedev->port;
+ acpi_handle handle = DEVICE_ACPI_HANDLE(&pdev->dev);
struct pci_bus *parent;
while (!handle) {
pdev = parent->self;
}
- if (!handle)
- return OSC_METHOD_NOT_SUPPORTED;
+ if (handle) {
+ pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
+ status = pci_osc_control_set(handle,
+ OSC_PCI_EXPRESS_AER_CONTROL |
+ OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
+ }
- pci_osc_support_set(OSC_EXT_PCI_CONFIG_SUPPORT);
- status = pci_osc_control_set(handle, OSC_PCI_EXPRESS_AER_CONTROL |
- OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL);
if (ACPI_FAILURE(status)) {
- if (status == AE_SUPPORT)
- retval = OSC_METHOD_NOT_SUPPORTED;
- else
- retval = OSC_METHOD_RUN_FAILURE;
+ printk(KERN_DEBUG "AER service couldn't init device %s - %s\n",
+ pciedev->device.bus_id,
+ (status == AE_SUPPORT || status == AE_NOT_FOUND) ?
+ "no _OSC support" : "Run ACPI _OSC fails");
+ return -1;
}
- return retval;
+ return 0;
}
-
#include <linux/errno.h>
#include <linux/pm.h>
#include <linux/suspend.h>
-#include <linux/acpi.h>
-#include <linux/pci-acpi.h>
#include <linux/delay.h>
#include "aerdrv.h"
return 0;
}
+int pci_cleanup_aer_correct_error_status(struct pci_dev *dev)
+{
+ int pos;
+ u32 status;
+
+ pos = pci_find_aer_capability(dev);
+ if (!pos)
+ return -EIO;
+
+ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &status);
+ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, status);
+
+ return 0;
+}
+
static int find_device_iter(struct device *device, void *data)
{
struct pci_dev *dev;
**/
int aer_init(struct pcie_device *dev)
{
- int status;
-
- /* Run _OSC Method */
- status = aer_osc_setup(dev->port);
-
- if(status != OSC_METHOD_RUN_SUCCESS) {
- printk(KERN_DEBUG "%s: AER service init fails - %s\n",
- __FUNCTION__,
- (status == OSC_METHOD_NOT_SUPPORTED) ?
- "No ACPI _OSC support" : "Run ACPI _OSC fails");
-
- if (!forceload)
- return status;
- }
+ if (aer_osc_setup(dev) && !forceload)
+ return -ENXIO;
return AER_SUCCESS;
}
EXPORT_SYMBOL_GPL(pci_enable_pcie_error_reporting);
EXPORT_SYMBOL_GPL(pci_disable_pcie_error_reporting);
EXPORT_SYMBOL_GPL(pci_cleanup_aer_uncorrect_error_status);
+EXPORT_SYMBOL_GPL(pci_cleanup_aer_correct_error_status);
b->legacy_io->attr.name = "legacy_io";
b->legacy_io->size = 0xffff;
b->legacy_io->attr.mode = S_IRUSR | S_IWUSR;
- b->legacy_io->attr.owner = THIS_MODULE;
b->legacy_io->read = pci_read_legacy_io;
b->legacy_io->write = pci_write_legacy_io;
class_device_create_bin_file(&b->class_dev, b->legacy_io);
b->legacy_mem->attr.name = "legacy_mem";
b->legacy_mem->size = 1024*1024;
b->legacy_mem->attr.mode = S_IRUSR | S_IWUSR;
- b->legacy_mem->attr.owner = THIS_MODULE;
b->legacy_mem->mmap = pci_mmap_legacy_mem;
class_device_create_bin_file(&b->class_dev, b->legacy_mem);
}
pcibios_assign_all_busses() ? " " :
" (try 'pci=assign-busses')");
printk(KERN_WARNING "Please report the result to "
- "linux-kernel to fix this permanently\n");
+ "<bk@suse.de> to fix this permanently\n");
}
bus = bus->parent;
}
dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn));
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
+ dev->revision = class & 0xff;
class >>= 8; /* upper 3 bytes */
dev->class = class;
class >>= 8;
__initcall(pci_proc_init);
#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pci_proc_attach_device);
EXPORT_SYMBOL(pci_proc_detach_bus);
#endif
*/
static void __devinit quirk_amd_ioapic(struct pci_dev *dev)
{
- u8 rev;
-
- pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- if (rev >= 0x02) {
+ if (dev->revision >= 0x02) {
printk(KERN_WARNING "I/O APIC: AMD Erratum #22 may be present. In the event of instability try\n");
printk(KERN_WARNING " : booting with the \"noapic\" option.\n");
}
#define AMD8131_NIOAMODE_BIT 0
static void quirk_amd_8131_ioapic(struct pci_dev *dev)
{
- unsigned char revid, tmp;
+ unsigned char tmp;
if (nr_ioapics == 0)
return;
- pci_read_config_byte(dev, PCI_REVISION_ID, &revid);
- if (revid == AMD8131_revA0 || revid == AMD8131_revB0) {
+ if (dev->revision == AMD8131_revA0 || dev->revision == AMD8131_revB0) {
printk(KERN_INFO "Fixing up AMD8131 IOAPIC mode\n");
pci_read_config_byte( dev, AMD8131_MISC, &tmp);
tmp &= ~(1 << AMD8131_NIOAMODE_BIT);
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_ioapic);
#endif /* CONFIG_X86_IO_APIC */
+/*
+ * Some settings of MMRBC can lead to data corruption so block changes.
+ * See AMD 8131 HyperTransport PCI-X Tunnel Revision Guide
+ */
+static void __init quirk_amd_8131_mmrbc(struct pci_dev *dev)
+{
+ unsigned char revid;
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &revid);
+ if (dev->subordinate && revid <= 0x12) {
+ printk(KERN_INFO "AMD8131 rev %x detected, disabling PCI-X "
+ "MMRBC\n", revid);
+ dev->subordinate->bus_flags |= PCI_BUS_FLAGS_NO_MMRBC;
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8131_BRIDGE, quirk_amd_8131_mmrbc);
/*
* FIXME: it is questionable that quirk_via_acpi
static void quirk_disable_pxb(struct pci_dev *pdev)
{
u16 config;
- u8 rev;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
- if (rev != 0x04) /* Only C0 requires this */
+ if (pdev->revision != 0x04) /* Only C0 requires this */
return;
pci_read_config_word(pdev, 0x40, &config);
if (config & (1<<6)) {
pci_write_config_dword(pdev, pdev->rom_base_reg, rom_addr);
}
+/**
+ * pci_get_rom_size - obtain the actual size of the ROM image
+ * @rom: kernel virtual pointer to image of ROM
+ * @size: size of PCI window
+ * return: size of actual ROM image
+ *
+ * Determine the actual length of the ROM image.
+ * The PCI window size could be much larger than the
+ * actual image size.
+ */
+size_t pci_get_rom_size(void __iomem *rom, size_t size)
+{
+ void __iomem *image;
+ int last_image;
+
+ image = rom;
+ do {
+ void __iomem *pds;
+ /* Standard PCI ROMs start out with these bytes 55 AA */
+ if (readb(image) != 0x55)
+ break;
+ if (readb(image + 1) != 0xAA)
+ break;
+ /* get the PCI data structure and check its signature */
+ pds = image + readw(image + 24);
+ if (readb(pds) != 'P')
+ break;
+ if (readb(pds + 1) != 'C')
+ break;
+ if (readb(pds + 2) != 'I')
+ break;
+ if (readb(pds + 3) != 'R')
+ break;
+ last_image = readb(pds + 21) & 0x80;
+ /* this length is reliable */
+ image += readw(pds + 16) * 512;
+ } while (!last_image);
+
+ /* never return a size larger than the PCI resource window */
+ /* there are known ROMs that get the size wrong */
+ return min((size_t)(image - rom), size);
+}
+
/**
* pci_map_rom - map a PCI ROM to kernel space
* @pdev: pointer to pci device struct
struct resource *res = &pdev->resource[PCI_ROM_RESOURCE];
loff_t start;
void __iomem *rom;
- void __iomem *image;
- int last_image;
/*
* IORESOURCE_ROM_SHADOW set on x86, x86_64 and IA64 supports legacy
* size is much larger than the actual size of the ROM.
* True size is important if the ROM is going to be copied.
*/
- image = rom;
- do {
- void __iomem *pds;
- /* Standard PCI ROMs start out with these bytes 55 AA */
- if (readb(image) != 0x55)
- break;
- if (readb(image + 1) != 0xAA)
- break;
- /* get the PCI data structure and check its signature */
- pds = image + readw(image + 24);
- if (readb(pds) != 'P')
- break;
- if (readb(pds + 1) != 'C')
- break;
- if (readb(pds + 2) != 'I')
- break;
- if (readb(pds + 3) != 'R')
- break;
- last_image = readb(pds + 21) & 0x80;
- /* this length is reliable */
- image += readw(pds + 16) * 512;
- } while (!last_image);
-
- /* never return a size larger than the PCI resource window */
- /* there are known ROMs that get the size wrong */
- *size = min((size_t)(image - rom), *size);
-
+ *size = pci_get_rom_size(rom, *size);
return rom;
}
}
/**
- * pci_get_bus_and_slot - locate PCI device from a given PCI slot
+ * pci_get_bus_and_slot - locate PCI device from a given PCI bus & slot
* @bus: number of PCI bus on which desired PCI device resides
* @devfn: encodes number of PCI slot in which the desired PCI
* device resides and the logical device number within that slot
* in case of multi-function devices.
*
+ * Note: the bus/slot search is limited to PCI domain (segment) 0.
+ *
* Given a PCI bus and slot/function number, the desired PCI device
* is located in system global list of PCI devices. If the device
* is found, a pointer to its data structure is returned. If no
struct pci_dev *dev = NULL;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
- if (dev->bus->number == bus && dev->devfn == devfn)
+ if (pci_domain_nr(dev->bus) == 0 &&
+ (dev->bus->number == bus && dev->devfn == devfn))
return dev;
}
return NULL;
#define DBG(x...)
#endif
-#define ROUND_UP(x, a) (((x) + (a) - 1) & ~((a) - 1))
-
static void pbus_assign_resources_sorted(struct pci_bus *bus)
{
struct pci_dev *dev;
#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
size = (size & 0xff) + ((size & ~0xffUL) << 2);
#endif
- size = ROUND_UP(size + size1, 4096);
+ size = ALIGN(size + size1, 4096);
if (!size) {
b_res->flags = 0;
return;
if (!align)
min_align = align1;
- else if (ROUND_UP(align + min_align, min_align) < align1)
+ else if (ALIGN(align + min_align, min_align) < align1)
min_align = align1 >> 1;
align += aligns[order];
}
- size = ROUND_UP(size, min_align);
+ size = ALIGN(size, min_align);
if (!size) {
b_res->flags = 0;
return 1;
u8 byte;
u16 word;
u32 dword;
- long err, cfg_ret;
+ long err;
+ long cfg_ret;
- err = -EPERM;
if (!capable(CAP_SYS_ADMIN))
- goto error;
+ return -EPERM;
err = -ENODEV;
- dev = pci_find_slot(bus, dfn);
+ dev = pci_get_bus_and_slot(bus, dfn);
if (!dev)
goto error;
case 4:
err = put_user(dword, (unsigned int __user *)buf);
break;
- };
+ }
+ pci_dev_put(dev);
return err;
error:
case 4:
put_user(-1, (unsigned int __user *)buf);
break;
- };
+ }
+ pci_dev_put(dev);
return err;
}
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- dev = pci_find_slot(bus, dfn);
+ dev = pci_get_bus_and_slot(bus, dfn);
if (!dev)
return -ENODEV;
default:
err = -EINVAL;
break;
- };
+ }
unlock_kernel();
-
+ pci_dev_put(dev);
return err;
}
return (ret);
}
-static ssize_t pccard_show_cis(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t pccard_show_cis(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
unsigned int size = 0x200;
return (count);
}
-static ssize_t pccard_store_cis(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t pccard_store_cis(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct pcmcia_socket *s = to_socket(container_of(kobj, struct device, kobj));
cisdump_t *cis;
};
static struct bin_attribute pccard_cis_attr = {
- .attr = { .name = "cis", .mode = S_IRUGO | S_IWUSR, .owner = THIS_MODULE},
+ .attr = { .name = "cis", .mode = S_IRUGO | S_IWUSR },
.size = 0x200,
.read = pccard_show_cis,
.write = pccard_store_cis,
};
static ssize_t
-rio_read_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
+rio_read_config(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct rio_dev *dev =
to_rio_dev(container_of(kobj, struct device, kobj));
}
static ssize_t
-rio_write_config(struct kobject *kobj, char *buf, loff_t off, size_t count)
+rio_write_config(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct rio_dev *dev =
to_rio_dev(container_of(kobj, struct device, kobj));
.attr = {
.name = "config",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 0x200000,
.read = rio_read_config,
.ioctl = ds1553_rtc_ioctl,
};
-static ssize_t ds1553_nvram_read(struct kobject *kobj, char *buf,
- loff_t pos, size_t size)
+static ssize_t ds1553_nvram_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t size)
{
struct platform_device *pdev =
to_platform_device(container_of(kobj, struct device, kobj));
return count;
}
-static ssize_t ds1553_nvram_write(struct kobject *kobj, char *buf,
- loff_t pos, size_t size)
+static ssize_t ds1553_nvram_write(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t size)
{
struct platform_device *pdev =
to_platform_device(container_of(kobj, struct device, kobj));
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUGO,
- .owner = THIS_MODULE,
},
.size = RTC_OFFSET,
.read = ds1553_nvram_read,
.set_time = ds1742_rtc_set_time,
};
-static ssize_t ds1742_nvram_read(struct kobject *kobj, char *buf,
- loff_t pos, size_t size)
+static ssize_t ds1742_nvram_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t size)
{
struct platform_device *pdev =
to_platform_device(container_of(kobj, struct device, kobj));
return count;
}
-static ssize_t ds1742_nvram_write(struct kobject *kobj, char *buf,
- loff_t pos, size_t size)
+static ssize_t ds1742_nvram_write(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t pos, size_t size)
{
struct platform_device *pdev =
to_platform_device(container_of(kobj, struct device, kobj));
.attr = {
.name = "nvram",
.mode = S_IRUGO | S_IWUGO,
- .owner = THIS_MODULE,
},
.read = ds1742_nvram_read,
.write = ds1742_nvram_write,
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/err.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/ioport.h>
-#include <linux/irq.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/uaccess.h>
-#include <asm/vr41xx/irq.h>
MODULE_AUTHOR("Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>");
MODULE_DESCRIPTION("NEC VR4100 series RTC driver");
MODULE_LICENSE("GPL");
-#define RTC1_TYPE1_START 0x0b0000c0UL
-#define RTC1_TYPE1_END 0x0b0000dfUL
-#define RTC2_TYPE1_START 0x0b0001c0UL
-#define RTC2_TYPE1_END 0x0b0001dfUL
-
-#define RTC1_TYPE2_START 0x0f000100UL
-#define RTC1_TYPE2_END 0x0f00011fUL
-#define RTC2_TYPE2_START 0x0f000120UL
-#define RTC2_TYPE2_END 0x0f00013fUL
-
-#define RTC1_SIZE 0x20
-#define RTC2_SIZE 0x20
-
/* RTC 1 registers */
#define ETIMELREG 0x00
#define ETIMEMREG 0x02
static unsigned long periodic_frequency;
static unsigned long periodic_count;
static unsigned int alarm_enabled;
-
-struct resource rtc_resource[2] = {
- { .name = rtc_name,
- .flags = IORESOURCE_MEM, },
- { .name = rtc_name,
- .flags = IORESOURCE_MEM, },
-};
+static int aie_irq = -1;
+static int pie_irq = -1;
static inline unsigned long read_elapsed_second(void)
{
spin_unlock_irq(&rtc_lock);
- disable_irq(ELAPSEDTIME_IRQ);
- disable_irq(RTCLONG1_IRQ);
+ disable_irq(aie_irq);
+ disable_irq(pie_irq);
}
static int vr41xx_rtc_read_time(struct device *dev, struct rtc_time *time)
spin_lock_irq(&rtc_lock);
if (alarm_enabled)
- disable_irq(ELAPSEDTIME_IRQ);
+ disable_irq(aie_irq);
rtc1_write(ECMPLREG, (uint16_t)(alarm_sec << 15));
rtc1_write(ECMPMREG, (uint16_t)(alarm_sec >> 1));
rtc1_write(ECMPHREG, (uint16_t)(alarm_sec >> 17));
if (wkalrm->enabled)
- enable_irq(ELAPSEDTIME_IRQ);
+ enable_irq(aie_irq);
alarm_enabled = wkalrm->enabled;
spin_lock_irq(&rtc_lock);
if (!alarm_enabled) {
- enable_irq(ELAPSEDTIME_IRQ);
+ enable_irq(aie_irq);
alarm_enabled = 1;
}
spin_lock_irq(&rtc_lock);
if (alarm_enabled) {
- disable_irq(ELAPSEDTIME_IRQ);
+ disable_irq(aie_irq);
alarm_enabled = 0;
}
spin_unlock_irq(&rtc_lock);
break;
case RTC_PIE_ON:
- enable_irq(RTCLONG1_IRQ);
+ enable_irq(pie_irq);
break;
case RTC_PIE_OFF:
- disable_irq(RTCLONG1_IRQ);
+ disable_irq(pie_irq);
break;
case RTC_IRQP_READ:
return put_user(periodic_frequency, (unsigned long __user *)arg);
static int __devinit rtc_probe(struct platform_device *pdev)
{
+ struct resource *res;
struct rtc_device *rtc;
- unsigned int irq;
int retval;
- if (pdev->num_resources != 2)
+ if (pdev->num_resources != 4)
return -EBUSY;
- rtc1_base = ioremap(pdev->resource[0].start, RTC1_SIZE);
- if (rtc1_base == NULL)
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
return -EBUSY;
- rtc2_base = ioremap(pdev->resource[1].start, RTC2_SIZE);
- if (rtc2_base == NULL) {
- iounmap(rtc1_base);
- rtc1_base = NULL;
+ rtc1_base = ioremap(res->start, res->end - res->start + 1);
+ if (!rtc1_base)
return -EBUSY;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res) {
+ retval = -EBUSY;
+ goto err_rtc1_iounmap;
+ }
+
+ rtc2_base = ioremap(res->start, res->end - res->start + 1);
+ if (!rtc2_base) {
+ retval = -EBUSY;
+ goto err_rtc1_iounmap;
}
rtc = rtc_device_register(rtc_name, &pdev->dev, &vr41xx_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
- iounmap(rtc1_base);
- iounmap(rtc2_base);
- rtc1_base = NULL;
- rtc2_base = NULL;
- return PTR_ERR(rtc);
+ retval = PTR_ERR(rtc);
+ goto err_iounmap_all;
}
spin_lock_irq(&rtc_lock);
spin_unlock_irq(&rtc_lock);
- irq = ELAPSEDTIME_IRQ;
- retval = request_irq(irq, elapsedtime_interrupt, IRQF_DISABLED,
- "elapsed_time", pdev);
- if (retval == 0) {
- irq = RTCLONG1_IRQ;
- retval = request_irq(irq, rtclong1_interrupt, IRQF_DISABLED,
- "rtclong1", pdev);
+ aie_irq = platform_get_irq(pdev, 0);
+ if (aie_irq < 0 || aie_irq >= NR_IRQS) {
+ retval = -EBUSY;
+ goto err_device_unregister;
}
- if (retval < 0) {
- printk(KERN_ERR "rtc: IRQ%d is busy\n", irq);
- rtc_device_unregister(rtc);
- if (irq == RTCLONG1_IRQ)
- free_irq(ELAPSEDTIME_IRQ, NULL);
- iounmap(rtc1_base);
- iounmap(rtc2_base);
- rtc1_base = NULL;
- rtc2_base = NULL;
- return retval;
- }
+ retval = request_irq(aie_irq, elapsedtime_interrupt, IRQF_DISABLED,
+ "elapsed_time", pdev);
+ if (retval < 0)
+ goto err_device_unregister;
+
+ pie_irq = platform_get_irq(pdev, 1);
+ if (pie_irq < 0 || pie_irq >= NR_IRQS)
+ goto err_free_irq;
+
+ retval = request_irq(pie_irq, rtclong1_interrupt, IRQF_DISABLED,
+ "rtclong1", pdev);
+ if (retval < 0)
+ goto err_free_irq;
platform_set_drvdata(pdev, rtc);
- disable_irq(ELAPSEDTIME_IRQ);
- disable_irq(RTCLONG1_IRQ);
+ disable_irq(aie_irq);
+ disable_irq(pie_irq);
printk(KERN_INFO "rtc: Real Time Clock of NEC VR4100 series\n");
return 0;
+
+err_free_irq:
+ free_irq(aie_irq, pdev);
+
+err_device_unregister:
+ rtc_device_unregister(rtc);
+
+err_iounmap_all:
+ iounmap(rtc2_base);
+ rtc2_base = NULL;
+
+err_rtc1_iounmap:
+ iounmap(rtc1_base);
+ rtc1_base = NULL;
+
+ return retval;
}
static int __devexit rtc_remove(struct platform_device *pdev)
struct rtc_device *rtc;
rtc = platform_get_drvdata(pdev);
- if (rtc != NULL)
+ if (rtc)
rtc_device_unregister(rtc);
platform_set_drvdata(pdev, NULL);
- free_irq(ELAPSEDTIME_IRQ, NULL);
- free_irq(RTCLONG1_IRQ, NULL);
- if (rtc1_base != NULL)
+ free_irq(aie_irq, pdev);
+ free_irq(pie_irq, pdev);
+ if (rtc1_base)
iounmap(rtc1_base);
- if (rtc2_base != NULL)
+ if (rtc2_base)
iounmap(rtc2_base);
return 0;
}
-static struct platform_device *rtc_platform_device;
-
static struct platform_driver rtc_platform_driver = {
.probe = rtc_probe,
.remove = __devexit_p(rtc_remove),
static int __init vr41xx_rtc_init(void)
{
- int retval;
-
- switch (current_cpu_data.cputype) {
- case CPU_VR4111:
- case CPU_VR4121:
- rtc_resource[0].start = RTC1_TYPE1_START;
- rtc_resource[0].end = RTC1_TYPE1_END;
- rtc_resource[1].start = RTC2_TYPE1_START;
- rtc_resource[1].end = RTC2_TYPE1_END;
- break;
- case CPU_VR4122:
- case CPU_VR4131:
- case CPU_VR4133:
- rtc_resource[0].start = RTC1_TYPE2_START;
- rtc_resource[0].end = RTC1_TYPE2_END;
- rtc_resource[1].start = RTC2_TYPE2_START;
- rtc_resource[1].end = RTC2_TYPE2_END;
- break;
- default:
- return -ENODEV;
- break;
- }
-
- rtc_platform_device = platform_device_alloc("RTC", -1);
- if (rtc_platform_device == NULL)
- return -ENOMEM;
-
- retval = platform_device_add_resources(rtc_platform_device,
- rtc_resource, ARRAY_SIZE(rtc_resource));
-
- if (retval == 0)
- retval = platform_device_add(rtc_platform_device);
-
- if (retval < 0) {
- platform_device_put(rtc_platform_device);
- return retval;
- }
-
- retval = platform_driver_register(&rtc_platform_driver);
- if (retval < 0)
- platform_device_unregister(rtc_platform_device);
-
- return retval;
+ return platform_driver_register(&rtc_platform_driver);
}
static void __exit vr41xx_rtc_exit(void)
{
platform_driver_unregister(&rtc_platform_driver);
- platform_device_unregister(rtc_platform_device);
}
module_init(vr41xx_rtc_init);
*
* based on a lot of other RTC drivers.
*
+ * Information and datasheet:
+ * http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* Two bytes need to be written to read a single register,
* while most other chips just require one and take the second
* one as the data to be written. To prevent corrupting
- * unknown chips, the user must explicitely set the probe parameter.
+ * unknown chips, the user must explicitly set the probe parameter.
*/
static unsigned short normal_i2c[] = { I2C_CLIENT_END };
/*
* Channel measurement related functions
*/
-static ssize_t chp_measurement_chars_read(struct kobject *kobj, char *buf,
- loff_t off, size_t count)
+static ssize_t chp_measurement_chars_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct channel_path *chp;
unsigned int size;
.attr = {
.name = "measurement_chars",
.mode = S_IRUSR,
- .owner = THIS_MODULE,
},
.size = sizeof(struct cmg_chars),
.read = chp_measurement_chars_read,
} while (reference_buf.values[0] != buf->values[0]);
}
-static ssize_t chp_measurement_read(struct kobject *kobj, char *buf,
- loff_t off, size_t count)
+static ssize_t chp_measurement_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct channel_path *chp;
struct channel_subsystem *css;
.attr = {
.name = "measurement",
.mode = S_IRUSR,
- .owner = THIS_MODULE,
},
.size = sizeof(struct cmg_entry),
.read = chp_measurement_read,
#define QETH_DEVICE_ATTR(_id,_name,_mode,_show,_store) \
struct device_attribute dev_attr_##_id = { \
- .attr = {.name=__stringify(_name), .mode=_mode, .owner=THIS_MODULE },\
+ .attr = {.name=__stringify(_name), .mode=_mode, },\
.show = _show, \
.store = _store, \
};
{
int err, i;
- err = pci_read_config_byte(asd_ha->pcidev, PCI_REVISION_ID,
- &asd_ha->revision_id);
- if (err) {
- asd_printk("couldn't read REVISION ID register of %s\n",
- pci_name(asd_ha->pcidev));
- goto Err;
- }
+ asd_ha->revision_id = asd_ha->pcidev->revision;
+
err = -ENODEV;
if (asd_ha->revision_id < AIC9410_DEV_REV_B0) {
asd_printk("%s is revision %s (%X), which is not supported\n",
struct class_device_attribute *arcmsr_host_attrs[];
static ssize_t
-arcmsr_sysfs_iop_message_read(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+arcmsr_sysfs_iop_message_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct class_device *cdev = container_of(kobj,struct class_device,kobj);
struct Scsi_Host *host = class_to_shost(cdev);
}
static ssize_t
-arcmsr_sysfs_iop_message_write(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+arcmsr_sysfs_iop_message_write(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct class_device *cdev = container_of(kobj,struct class_device,kobj);
struct Scsi_Host *host = class_to_shost(cdev);
}
static ssize_t
-arcmsr_sysfs_iop_message_clear(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+arcmsr_sysfs_iop_message_clear(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct class_device *cdev = container_of(kobj,struct class_device,kobj);
struct Scsi_Host *host = class_to_shost(cdev);
.attr = {
.name = "mu_read",
.mode = S_IRUSR ,
- .owner = THIS_MODULE,
},
.size = 1032,
.read = arcmsr_sysfs_iop_message_read,
.attr = {
.name = "mu_write",
.mode = S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 1032,
.write = arcmsr_sysfs_iop_message_write,
.attr = {
.name = "mu_clear",
.mode = S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 1,
.write = arcmsr_sysfs_iop_message_clear,
/**
* ipr_read_trace - Dump the adapter trace
* @kobj: kobject struct
+ * @bin_attr: bin_attribute struct
* @buf: buffer
* @off: offset
* @count: buffer size
* Return value:
* number of bytes printed to buffer
**/
-static ssize_t ipr_read_trace(struct kobject *kobj, char *buf,
- loff_t off, size_t count)
+static ssize_t ipr_read_trace(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct class_device *cdev = container_of(kobj,struct class_device,kobj);
struct Scsi_Host *shost = class_to_shost(cdev);
/**
* ipr_read_dump - Dump the adapter
* @kobj: kobject struct
+ * @bin_attr: bin_attribute struct
* @buf: buffer
* @off: offset
* @count: buffer size
* Return value:
* number of bytes printed to buffer
**/
-static ssize_t ipr_read_dump(struct kobject *kobj, char *buf,
- loff_t off, size_t count)
+static ssize_t ipr_read_dump(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct class_device *cdev = container_of(kobj,struct class_device,kobj);
struct Scsi_Host *shost = class_to_shost(cdev);
/**
* ipr_write_dump - Setup dump state of adapter
* @kobj: kobject struct
+ * @bin_attr: bin_attribute struct
* @buf: buffer
* @off: offset
* @count: buffer size
* Return value:
* number of bytes printed to buffer
**/
-static ssize_t ipr_write_dump(struct kobject *kobj, char *buf,
- loff_t off, size_t count)
+static ssize_t ipr_write_dump(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct class_device *cdev = container_of(kobj,struct class_device,kobj);
struct Scsi_Host *shost = class_to_shost(cdev);
**/
static int ipr_invalid_adapter(struct ipr_ioa_cfg *ioa_cfg)
{
- u8 rev_id;
int i;
- if (ioa_cfg->type == 0x5702) {
- if (pci_read_config_byte(ioa_cfg->pdev, PCI_REVISION_ID,
- &rev_id) == PCIBIOS_SUCCESSFUL) {
- if (rev_id < 4) {
- for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
- if (__is_processor(ipr_blocked_processors[i]))
- return 1;
- }
- }
+ if ((ioa_cfg->type == 0x5702) && (ioa_cfg->pdev->revision < 4)) {
+ for (i = 0; i < ARRAY_SIZE(ipr_blocked_processors); i++){
+ if (__is_processor(ipr_blocked_processors[i]))
+ return 1;
}
}
return 0;
else
ioa_cfg->transop_timeout = IPR_OPERATIONAL_TIMEOUT;
- rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &ioa_cfg->revid);
-
- if (rc != PCIBIOS_SUCCESSFUL) {
- dev_err(&pdev->dev, "Failed to read PCI revision ID\n");
- rc = -EIO;
- goto out_scsi_host_put;
- }
+ ioa_cfg->revid = pdev->revision;
ipr_regs_pci = pci_resource_start(pdev, 0);
uint32_t mem_addr;
uint32_t io_len;
uint32_t mem_len;
- uint8_t revision_id;
uint8_t bus;
uint8_t func;
uint8_t irq;
}
}
- /* get the revision ID */
- if (pci_read_config_byte(pci_dev, PCI_REVISION_ID, &revision_id)) {
- IPS_PRINTK(KERN_WARNING, pci_dev, "Can't get revision id.\n");
- return -1;
- }
-
subdevice_id = pci_dev->subsystem_device;
/* found a controller */
ha->mem_ptr = mem_ptr;
ha->ioremap_ptr = ioremap_ptr;
ha->host_num = (uint32_t) index;
- ha->revision_id = revision_id;
+ ha->revision_id = pci_dev->revision;
ha->slot_num = PCI_SLOT(pci_dev->devfn);
ha->device_id = pci_dev->device;
ha->subdevice_id = subdevice_id;
#if 0
/* FIXME: smp needs to migrate into the sas class */
-static ssize_t smp_portal_read(struct kobject *, char *, loff_t, size_t);
-static ssize_t smp_portal_write(struct kobject *, char *, loff_t, size_t);
+static ssize_t smp_portal_read(struct kobject *, struct bin_attribute *,
+ char *, loff_t, size_t);
+static ssize_t smp_portal_write(struct kobject *, struct bin_attribute *,
+ char *, loff_t, size_t);
#endif
/* ---------- SMP task management ---------- */
memset(bin_attr, 0, sizeof(*bin_attr));
bin_attr->attr.name = SMP_BIN_ATTR_NAME;
- bin_attr->attr.owner = THIS_MODULE;
bin_attr->attr.mode = 0600;
bin_attr->size = 0;
#if 0
/* ---------- SMP portal ---------- */
-static ssize_t smp_portal_write(struct kobject *kobj, char *buf, loff_t offs,
- size_t size)
+static ssize_t smp_portal_write(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t offs, size_t size)
{
struct domain_device *dev = to_dom_device(kobj);
struct expander_device *ex = &dev->ex_dev;
return size;
}
-static ssize_t smp_portal_read(struct kobject *kobj, char *buf, loff_t offs,
- size_t size)
+static ssize_t smp_portal_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t offs, size_t size)
{
struct domain_device *dev = to_dom_device(kobj);
struct expander_device *ex = &dev->ex_dev;
};
static ssize_t
-sysfs_ctlreg_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
+sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
size_t buf_off;
struct Scsi_Host *host = class_to_shost(container_of(kobj,
}
static ssize_t
-sysfs_ctlreg_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+sysfs_ctlreg_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
size_t buf_off;
uint32_t * tmp_ptr;
.attr = {
.name = "ctlreg",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 256,
.read = sysfs_ctlreg_read,
}
static ssize_t
-sysfs_mbox_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
+sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct Scsi_Host * host =
class_to_shost(container_of(kobj, struct class_device, kobj));
}
static ssize_t
-sysfs_mbox_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+sysfs_mbox_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct Scsi_Host *host =
class_to_shost(container_of(kobj, struct class_device,
.attr = {
.name = "mbox",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = MAILBOX_CMD_SIZE,
.read = sysfs_mbox_read,
INIT_LIST_HEAD(&phba->fc_nodes);
pci_set_master(pdev);
- retval = pci_set_mwi(pdev);
- if (retval)
- dev_printk(KERN_WARNING, &pdev->dev,
- "Warning: pci_set_mwi returned %d\n", retval);
+ pci_try_set_mwi(pdev);
if (pci_set_dma_mask(phba->pcidev, DMA_64BIT_MASK) != 0)
if (pci_set_dma_mask(phba->pcidev, DMA_32BIT_MASK) != 0)
return 0;
}
-/* Enable wake event */
-static int nsp32_enable_wake(struct pci_dev *pdev, pci_power_t state, int enable)
-{
- struct Scsi_Host *host = pci_get_drvdata(pdev);
-
- nsp32_msg(KERN_INFO, "pci-enable_wake: stub, pdev=0x%p, enable=%d, slot=%s, host=0x%p", pdev, enable, pci_name(pdev), host);
-
- return 0;
-}
#endif
/************************************************************************
#ifdef CONFIG_PM
.suspend = nsp32_suspend,
.resume = nsp32_resume,
- .enable_wake = nsp32_enable_wake,
#endif
};
/* SYSFS attributes --------------------------------------------------------- */
static ssize_t
-qla2x00_sysfs_read_fw_dump(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_read_fw_dump(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
}
static ssize_t
-qla2x00_sysfs_write_fw_dump(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_write_fw_dump(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
.attr = {
.name = "fw_dump",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 0,
.read = qla2x00_sysfs_read_fw_dump,
};
static ssize_t
-qla2x00_sysfs_read_nvram(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_read_nvram(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
}
static ssize_t
-qla2x00_sysfs_write_nvram(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_write_nvram(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
.attr = {
.name = "nvram",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 512,
.read = qla2x00_sysfs_read_nvram,
};
static ssize_t
-qla2x00_sysfs_read_optrom(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_read_optrom(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
}
static ssize_t
-qla2x00_sysfs_write_optrom(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_write_optrom(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
.attr = {
.name = "optrom",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = OPTROM_SIZE_24XX,
.read = qla2x00_sysfs_read_optrom,
};
static ssize_t
-qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_write_optrom_ctl(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
.attr = {
.name = "optrom_ctl",
.mode = S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 0,
.write = qla2x00_sysfs_write_optrom_ctl,
};
static ssize_t
-qla2x00_sysfs_read_vpd(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_read_vpd(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
}
static ssize_t
-qla2x00_sysfs_write_vpd(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_write_vpd(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
.attr = {
.name = "vpd",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = 0,
.read = qla2x00_sysfs_read_vpd,
};
static ssize_t
-qla2x00_sysfs_read_sfp(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+qla2x00_sysfs_read_sfp(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct scsi_qla_host *ha = to_qla_host(dev_to_shost(container_of(kobj,
struct device, kobj)));
.attr = {
.name = "sfp",
.mode = S_IRUSR | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = SFP_DEV_SIZE * 2,
.read = qla2x00_sysfs_read_sfp,
d &= ~PCI_ROM_ADDRESS_ENABLE;
pci_write_config_dword(ha->pdev, PCI_ROM_ADDRESS, d);
- pci_read_config_word(ha->pdev, PCI_REVISION_ID, &ha->chip_revision);
+ ha->chip_revision = ha->pdev->revision;
/* Get PCI bus information. */
spin_lock_irqsave(&ha->hardware_lock, flags);
config SERIAL_BFIN_DMA
bool "DMA mode"
- depends on DMA_UNCACHED_1M
+ depends on DMA_UNCACHED_1M && !KGDB_UART
help
This driver works under DMA mode. If this option is selected, the
blackfin simple dma driver is also enabled.
config SERIAL_BFIN_UART1
bool "Enable UART1"
- depends on SERIAL_BFIN && (BF534 || BF536 || BF537)
+ depends on SERIAL_BFIN && (BF534 || BF536 || BF537 || BF54x)
help
Enable UART1
config UART1_CTS_PIN
int "UART1 CTS pin"
- depends on BFIN_UART1_CTSRTS
+ depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
default -1
help
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
config UART1_RTS_PIN
int "UART1 RTS pin"
- depends on BFIN_UART1_CTSRTS
+ depends on BFIN_UART1_CTSRTS && (BF53x || BF561)
default -1
help
Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+config SERIAL_BFIN_UART2
+ bool "Enable UART2"
+ depends on SERIAL_BFIN && (BF54x)
+ help
+ Enable UART2
+
+config BFIN_UART2_CTSRTS
+ bool "Enable UART2 hardware flow control"
+ depends on SERIAL_BFIN_UART2
+ help
+ Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+ signal.
+
+config UART2_CTS_PIN
+ int "UART2 CTS pin"
+ depends on BFIN_UART2_CTSRTS
+ default -1
+ help
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config UART2_RTS_PIN
+ int "UART2 RTS pin"
+ depends on BFIN_UART2_CTSRTS
+ default -1
+ help
+ Refer to ./include/asm-blackfin/gpio.h to see the GPIO map.
+
+config SERIAL_BFIN_UART3
+ bool "Enable UART3"
+ depends on SERIAL_BFIN && (BF54x)
+ help
+ Enable UART3
+
+config BFIN_UART3_CTSRTS
+ bool "Enable UART3 hardware flow control"
+ depends on SERIAL_BFIN_UART3
+ help
+ Enable hardware flow control in the driver. Using GPIO emulate the CTS/RTS
+ signal.
+
config SERIAL_IMX
bool "IMX serial port support"
depends on ARM && ARCH_IMX
#include <linux/tty_flip.h>
#include <linux/serial_core.h>
+#ifdef CONFIG_KGDB_UART
+#include <linux/kgdb.h>
+#include <asm/irq_regs.h>
+#endif
+
#include <asm/gpio.h>
#include <asm/mach/bfin_serial_5xx.h>
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_BF54x
+ while (!(UART_GET_LSR(uart) & TEMT))
+ continue;
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_DMA
disable_dma(uart->tx_dma_channel);
+#else
+#ifdef CONFIG_BF54x
+ /* Waiting for Transmission Finished */
+ while (!(UART_GET_LSR(uart) & TFI))
+ continue;
+ /* Clear TFI bit */
+ UART_PUT_LSR(uart, TFI);
+ UART_CLEAR_IER(uart, ETBEI);
#else
unsigned short ier;
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
#endif
+#endif
}
/*
#ifdef CONFIG_SERIAL_BFIN_DMA
bfin_serial_dma_tx_chars(uart);
+#else
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ETBEI);
#else
unsigned short ier;
ier = UART_GET_IER(uart);
UART_PUT_IER(uart, ier);
bfin_serial_tx_chars(uart);
#endif
+#endif
}
/*
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, ERBFI);
+#else
unsigned short ier;
ier = UART_GET_IER(uart);
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT)
+#endif
ier &= ~ERBFI;
UART_PUT_IER(uart, ier);
+#endif
}
/*
{
}
+#ifdef CONFIG_KGDB_UART
+static int kgdb_entry_state;
+
+void kgdb_put_debug_char(int chr)
+{
+ struct bfin_serial_port *uart;
+
+ if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ uart = &bfin_serial_ports[0];
+ else
+ uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+
+ while (!(UART_GET_LSR(uart) & THRE)) {
+ __builtin_bfin_ssync();
+ }
+ UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
+ __builtin_bfin_ssync();
+ UART_PUT_CHAR(uart, (unsigned char)chr);
+ __builtin_bfin_ssync();
+}
+
+int kgdb_get_debug_char(void)
+{
+ struct bfin_serial_port *uart;
+ unsigned char chr;
+
+ if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ uart = &bfin_serial_ports[0];
+ else
+ uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+
+ while(!(UART_GET_LSR(uart) & DR)) {
+ __builtin_bfin_ssync();
+ }
+ UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
+ __builtin_bfin_ssync();
+ chr = UART_GET_CHAR(uart);
+ __builtin_bfin_ssync();
+
+ return chr;
+}
+#endif
+
#ifdef CONFIG_SERIAL_BFIN_PIO
static void local_put_char(struct bfin_serial_port *uart, char ch)
{
{
struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
+#ifdef CONFIG_KGDB_UART
+ struct pt_regs *regs = get_irq_regs();
+#endif
#ifdef BF533_FAMILY
static int in_break = 0;
#endif
ch = UART_GET_CHAR(uart);
uart->port.icount.rx++;
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line == CONFIG_KGDB_UART_PORT) {
+ if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
+ kgdb_breakkey_pressed(regs);
+ return;
+ } else if (kgdb_entry_state == 0 && ch == '$') {/* connection from KGDB */
+ kgdb_entry_state = 1;
+ } else if (kgdb_entry_state == 1 && ch == 'q') {
+ kgdb_entry_state = 0;
+ kgdb_breakkey_pressed(regs);
+ return;
+ } else if (ch == 0x3) {/* Ctrl + C */
+ kgdb_entry_state = 0;
+ kgdb_breakkey_pressed(regs);
+ return;
+ } else {
+ kgdb_entry_state = 0;
+ }
+ }
+#endif
+
#ifdef BF533_FAMILY
/* The BF533 family of processors have a nice misbehavior where
* they continuously generate characters for a "single" break.
{
struct bfin_serial_port *uart = dev_id;
+#ifdef CONFIG_BF54x
+ unsigned short status;
+ spin_lock(&uart->port.lock);
+ status = UART_GET_LSR(uart);
+ while ((UART_GET_IER(uart) & ERBFI) && (status & DR)) {
+ bfin_serial_rx_chars(uart);
+ status = UART_GET_LSR(uart);
+ }
+ spin_unlock(&uart->port.lock);
+#else
spin_lock(&uart->port.lock);
while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_RX_READY)
bfin_serial_rx_chars(uart);
spin_unlock(&uart->port.lock);
+#endif
return IRQ_HANDLED;
}
{
struct bfin_serial_port *uart = dev_id;
+#ifdef CONFIG_BF54x
+ unsigned short status;
+ spin_lock(&uart->port.lock);
+ status = UART_GET_LSR(uart);
+ while ((UART_GET_IER(uart) & ETBEI) && (status & THRE)) {
+ bfin_serial_tx_chars(uart);
+ status = UART_GET_LSR(uart);
+ }
+ spin_unlock(&uart->port.lock);
+#else
spin_lock(&uart->port.lock);
while ((UART_GET_IIR(uart) & IIR_STATUS) == IIR_TX_READY)
bfin_serial_tx_chars(uart);
spin_unlock(&uart->port.lock);
+#endif
return IRQ_HANDLED;
}
bfin_serial_mctrl_check(uart);
}
-
#endif
#ifdef CONFIG_SERIAL_BFIN_DMA
set_dma_x_count(uart->tx_dma_channel, uart->tx_count);
set_dma_x_modify(uart->tx_dma_channel, 1);
enable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ETBEI);
+#else
ier = UART_GET_IER(uart);
ier |= ETBEI;
UART_PUT_IER(uart, ier);
+#endif
spin_unlock_irqrestore(&uart->port.lock, flags);
}
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
clear_dma_irqstat(uart->tx_dma_channel);
disable_dma(uart->tx_dma_channel);
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, ETBEI);
+#else
ier = UART_GET_IER(uart);
ier &= ~ETBEI;
UART_PUT_IER(uart, ier);
+#endif
xmit->tail = (xmit->tail+uart->tx_count) &(UART_XMIT_SIZE -1);
uart->port.icount.tx+=uart->tx_count;
uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
add_timer(&(uart->rx_dma_timer));
#else
+# ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT && request_irq
+# else
if (request_irq
+# endif
(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED,
"BFIN_UART_RX", uart)) {
printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n");
return -EBUSY;
}
#endif
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ERBFI);
+#else
UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+#endif
return 0;
}
free_dma(uart->rx_dma_channel);
del_timer(&(uart->rx_dma_timer));
#else
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT)
+#endif
free_irq(uart->port.irq, uart);
free_irq(uart->port.irq+1, uart);
#endif
/* Disable UART */
ier = UART_GET_IER(uart);
+#ifdef CONFIG_BF54x
+ UART_CLEAR_IER(uart, 0xF);
+#else
UART_PUT_IER(uart, 0);
+#endif
+#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
val = UART_GET_LCR(uart);
val |= DLAB;
UART_PUT_LCR(uart, val);
SSYNC();
+#endif
UART_PUT_DLL(uart, quot & 0xFF);
SSYNC();
UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
SSYNC();
+#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
val = UART_GET_LCR(uart);
val &= ~DLAB;
UART_PUT_LCR(uart, val);
SSYNC();
+#endif
UART_PUT_LCR(uart, lcr);
/* Enable UART */
+#ifdef CONFIG_BF54x
+ UART_SET_IER(uart, ier);
+#else
UART_PUT_IER(uart, ier);
+#endif
val = UART_GET_GCTL(uart);
val |= UCEN;
bfin_serial_resource[i].uart_rts_pin;
#endif
bfin_serial_hw_init(&bfin_serial_ports[i]);
-
}
+
}
#ifdef CONFIG_SERIAL_BFIN_CONSOLE
static void bfin_serial_console_putchar(struct uart_port *port, int ch)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
- while (!(UART_GET_LSR(uart)))
+ while (!(UART_GET_LSR(uart) & THRE))
barrier();
UART_PUT_CHAR(uart, ch);
SSYNC();
case 2: *bits = 7; break;
case 3: *bits = 8; break;
}
+#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
val = UART_GET_LCR(uart);
val |= DLAB;
UART_PUT_LCR(uart, val);
+#endif
dll = UART_GET_DLL(uart);
dlh = UART_GET_DLH(uart);
+#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
val = UART_GET_LCR(uart);
val &= ~DLAB;
UART_PUT_LCR(uart, val);
+#endif
*baud = get_sclk() / (16*(dll | dlh << 8));
}
{
bfin_serial_init_ports();
register_console(&bfin_serial_console);
+#ifdef CONFIG_KGDB_UART
+ kgdb_entry_state = 0;
+ init_kgdb_uart();
+#endif
return 0;
}
console_initcall(bfin_serial_rs_console_init);
static int __init bfin_serial_init(void)
{
int ret;
+#ifdef CONFIG_KGDB_UART
+ struct bfin_serial_port *uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
+ struct termios t;
+#endif
pr_info("Serial: Blackfin serial driver\n");
uart_unregister_driver(&bfin_serial_reg);
}
}
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.cons->index != CONFIG_KGDB_UART_PORT) {
+ request_irq(uart->port.irq, bfin_serial_int,
+ IRQF_DISABLED, "BFIN_UART_RX", uart);
+ pr_info("Request irq for kgdb uart port\n");
+ UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
+ __builtin_bfin_ssync();
+ t.c_cflag = CS8|B57600;
+ t.c_iflag = 0;
+ t.c_oflag = 0;
+ t.c_lflag = ICANON;
+ t.c_line = CONFIG_KGDB_UART_PORT;
+ bfin_serial_set_termios(&uart->port, &t, &t);
+ }
+#endif
return ret;
}
spin_lock_init(&brd->bd_intr_lock);
/* store which revision we have */
- pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev);
+ brd->rev = pdev->revision;
brd->irq = pdev->irq;
/*
* Driver for NEC VR4100 series Serial Interface Unit.
*
- * Copyright (C) 2004-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2004-2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* Based on drivers/serial/8250.c, by Russell King.
*
#endif
#include <linux/console.h>
-#include <linux/platform_device.h>
-#include <linux/err.h>
-#include <linux/ioport.h>
+#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
+#include <linux/ioport.h>
#include <linux/module.h>
+#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/tty_flip.h>
#include <asm/io.h>
-#include <asm/vr41xx/irq.h>
#include <asm/vr41xx/siu.h>
#include <asm/vr41xx/vr41xx.h>
-#define SIU_PORTS_MAX 2
#define SIU_BAUD_BASE 1152000
#define SIU_MAJOR 204
#define SIU_MINOR_BASE 82
#define IRUSESEL 0x02
#define SIRSEL 0x01
-struct siu_port {
- unsigned int type;
- unsigned int irq;
- unsigned long start;
-};
-
-static const struct siu_port siu_type1_ports[] = {
- { .type = PORT_VR41XX_SIU,
- .irq = SIU_IRQ,
- .start = 0x0c000000UL, },
-};
-
-#define SIU_TYPE1_NR_PORTS (sizeof(siu_type1_ports) / sizeof(struct siu_port))
-
-static const struct siu_port siu_type2_ports[] = {
- { .type = PORT_VR41XX_SIU,
- .irq = SIU_IRQ,
- .start = 0x0f000800UL, },
- { .type = PORT_VR41XX_DSIU,
- .irq = DSIU_IRQ,
- .start = 0x0f000820UL, },
+static struct uart_port siu_uart_ports[SIU_PORTS_MAX] = {
+ [0 ... SIU_PORTS_MAX-1] = {
+ .lock = __SPIN_LOCK_UNLOCKED(siu_uart_ports->lock),
+ .irq = -1,
+ },
};
-#define SIU_TYPE2_NR_PORTS (sizeof(siu_type2_ports) / sizeof(struct siu_port))
-
-static struct uart_port siu_uart_ports[SIU_PORTS_MAX];
static uint8_t lsr_break_flag[SIU_PORTS_MAX];
#define siu_read(port, offset) readb((port)->membase + (offset))
spin_unlock_irqrestore(&port->lock, flags);
}
-
EXPORT_SYMBOL_GPL(vr41xx_select_siu_interface);
void vr41xx_use_irda(irda_use_t use)
spin_unlock_irqrestore(&port->lock, flags);
}
-
EXPORT_SYMBOL_GPL(vr41xx_use_irda);
void vr41xx_select_irda_module(irda_module_t module, irda_speed_t speed)
spin_unlock_irqrestore(&port->lock, flags);
}
-
EXPORT_SYMBOL_GPL(vr41xx_select_irda_module);
static inline void siu_clear_fifo(struct uart_port *port)
siu_write(port, UART_FCR, 0);
}
-static inline int siu_probe_ports(void)
-{
- switch (current_cpu_data.cputype) {
- case CPU_VR4111:
- case CPU_VR4121:
- return SIU_TYPE1_NR_PORTS;
- case CPU_VR4122:
- case CPU_VR4131:
- case CPU_VR4133:
- return SIU_TYPE2_NR_PORTS;
- }
-
- return 0;
-}
-
static inline unsigned long siu_port_size(struct uart_port *port)
{
switch (port->type) {
static inline unsigned int siu_check_type(struct uart_port *port)
{
- switch (current_cpu_data.cputype) {
- case CPU_VR4111:
- case CPU_VR4121:
- if (port->line == 0)
- return PORT_VR41XX_SIU;
- break;
- case CPU_VR4122:
- case CPU_VR4131:
- case CPU_VR4133:
- if (port->line == 0)
- return PORT_VR41XX_SIU;
- else if (port->line == 1)
- return PORT_VR41XX_DSIU;
- break;
- }
+ if (port->line == 0)
+ return PORT_VR41XX_SIU;
+ if (port->line == 1 && port->irq != -1)
+ return PORT_VR41XX_DSIU;
return PORT_UNKNOWN;
}
.verify_port = siu_verify_port,
};
-static int siu_init_ports(void)
+static int siu_init_ports(struct platform_device *pdev)
{
- const struct siu_port *siu;
struct uart_port *port;
- int i, num;
+ struct resource *res;
+ int *type = pdev->dev.platform_data;
+ int i;
- switch (current_cpu_data.cputype) {
- case CPU_VR4111:
- case CPU_VR4121:
- siu = siu_type1_ports;
- break;
- case CPU_VR4122:
- case CPU_VR4131:
- case CPU_VR4133:
- siu = siu_type2_ports;
- break;
- default:
+ if (!type)
return 0;
- }
port = siu_uart_ports;
- num = siu_probe_ports();
- for (i = 0; i < num; i++) {
- spin_lock_init(&port->lock);
- port->irq = siu->irq;
+ for (i = 0; i < SIU_PORTS_MAX; i++) {
+ port->type = type[i];
+ if (port->type == PORT_UNKNOWN)
+ continue;
+ port->irq = platform_get_irq(pdev, i);
port->uartclk = SIU_BAUD_BASE * 16;
port->fifosize = 16;
port->regshift = 0;
port->iotype = UPIO_MEM;
port->flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
- port->type = siu->type;
port->line = i;
- port->mapbase = siu->start;
- siu++;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ port->mapbase = res->start;
port++;
}
- return num;
+ return i;
}
#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
static int __devinit siu_console_init(void)
{
struct uart_port *port;
- int num, i;
-
- num = siu_init_ports();
- if (num <= 0)
- return -ENODEV;
+ int i;
- for (i = 0; i < num; i++) {
+ for (i = 0; i < SIU_PORTS_MAX; i++) {
port = &siu_uart_ports[i];
port->ops = &siu_uart_ops;
}
struct uart_port *port;
int num, i, retval;
- num = siu_init_ports();
+ num = siu_init_ports(dev);
if (num <= 0)
return -ENODEV;
return 0;
}
-static struct platform_device *siu_platform_device;
-
static struct platform_driver siu_device_driver = {
.probe = siu_probe,
.remove = __devexit_p(siu_remove),
static int __init vr41xx_siu_init(void)
{
- int retval;
-
- siu_platform_device = platform_device_alloc("SIU", -1);
- if (!siu_platform_device)
- return -ENOMEM;
-
- retval = platform_device_add(siu_platform_device);
- if (retval < 0) {
- platform_device_put(siu_platform_device);
- return retval;
- }
-
- retval = platform_driver_register(&siu_device_driver);
- if (retval < 0)
- platform_device_unregister(siu_platform_device);
-
- return retval;
+ return platform_driver_register(&siu_device_driver);
}
static void __exit vr41xx_siu_exit(void)
{
platform_driver_unregister(&siu_device_driver);
- platform_device_unregister(siu_platform_device);
}
module_init(vr41xx_siu_init);
}
static ssize_t
-at25_bin_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+at25_bin_read(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct device *dev;
struct at25_data *at25;
}
static ssize_t
-at25_bin_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
+at25_bin_write(struct kobject *kobj, struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct device *dev;
struct at25_data *at25;
*/
at25->bin.attr.name = "eeprom";
at25->bin.attr.mode = S_IRUSR;
- at25->bin.attr.owner = THIS_MODULE;
at25->bin.read = at25_bin_read;
at25->bin.size = at25->chip.byte_len;
struct tty_struct zs_ttys[NUM_CHANNELS];
#ifdef CONFIG_SERIAL_DEC_CONSOLE
-static struct console sercons;
+static struct console zs_console;
#endif
#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
!defined(MODULE)
static unsigned long break_pressed; /* break, really ... */
#endif
-static unsigned char zs_init_regs[16] = {
+static unsigned char zs_init_regs[16] __initdata = {
0, /* write 0 */
0, /* write 1 */
0, /* write 2 */
#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
!defined(MODULE)
- if (break_pressed && info->line == sercons.index) {
+ if (break_pressed && info->line == zs_console.index) {
/* Ignore the null char got when BREAK is removed. */
if (ch == 0)
continue;
if ((stat & BRK_ABRT) && !(info->read_reg_zero & BRK_ABRT)) {
#if defined(CONFIG_SERIAL_DEC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) && \
!defined(MODULE)
- if (info->line == sercons.index) {
+ if (info->line == zs_console.index) {
if (!break_pressed)
break_pressed = jiffies;
} else
}
#ifdef CONFIG_SERIAL_DEC_CONSOLE
- if (sercons.cflag && sercons.index == line) {
- tty->termios->c_cflag = sercons.cflag;
- sercons.cflag = 0;
+ if (zs_console.cflag && zs_console.index == line) {
+ tty->termios->c_cflag = zs_console.cflag;
+ zs_console.cflag = 0;
change_speed(info);
}
#endif
/* Initialize Z8530s zs_channels
*/
-static void probe_sccs(void)
+static void __init probe_sccs(void)
{
struct dec_serial **pp;
int i, n, n_chips = 0, n_channels, chip, channel;
* - initialize the serial port
* Return non-zero if we didn't find a serial port.
*/
-static int serial_console_setup(struct console *co, char *options)
+static int __init serial_console_setup(struct console *co, char *options)
{
struct dec_serial *info;
int baud = 9600;
return 0;
}
-static struct console sercons = {
+static struct console zs_console = {
.name = "ttyS",
.write = serial_console_write,
.device = serial_console_device,
*/
void __init zs_serial_console_init(void)
{
- register_console(&sercons);
+ register_console(&zs_console);
}
#endif /* ifdef CONFIG_SERIAL_DEC_CONSOLE */
dev_warn(&rhdev->dev, "root hub lost power or was reset\n");
- /* Make sure no potential wakeup events get lost,
- * by forcing the root hub to be resumed.
- */
- rhdev->dev.power.prev_state.event = PM_EVENT_ON;
-
spin_lock_irqsave(&device_state_lock, flags);
hub = hdev_to_hub(rhdev);
for (port1 = 1; port1 <= rhdev->maxchild; ++port1) {
, &dev->pci->pcimstctl);
/* erratum 0115 shouldn't appear: Linux inits PCI_LATENCY_TIMER */
pci_set_master (pdev);
- pci_set_mwi (pdev);
+ pci_try_set_mwi (pdev);
/* ... also flushes any posted pci writes */
dev->chiprev = get_idx_reg (dev->regs, REG_CHIPREV) & 0xffff;
* fixed in newer silicon.
*/
case 0x0068:
- pci_read_config_dword(pdev, PCI_REVISION_ID, &temp);
- if ((temp & 0xff) < 0xa4)
+ if (pdev->revision < 0xa4)
ehci->no_selective_suspend = 1;
break;
}
}
-static ssize_t radeon_show_edid1(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t radeon_show_edid1(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct pci_dev *pdev = to_pci_dev(dev);
}
-static ssize_t radeon_show_edid2(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t radeon_show_edid2(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct device *dev = container_of(kobj, struct device, kobj);
struct pci_dev *pdev = to_pci_dev(dev);
static struct bin_attribute edid1_attr = {
.attr = {
.name = "edid1",
- .owner = THIS_MODULE,
.mode = 0444,
},
.size = EDID_LENGTH,
static struct bin_attribute edid2_attr = {
.attr = {
.name = "edid2",
- .owner = THIS_MODULE,
.mode = 0444,
},
.size = EDID_LENGTH,
#define DECLARE_ATTR(_name,_mode,_show,_store) \
{ \
- .attr = { .name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE }, \
+ .attr = { .name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
}
#define DECLARE_ATTR(_name,_mode,_show,_store) \
{ \
- .attr = { .name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE }, \
+ .attr = { .name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
}
config VGA_CONSOLE
bool "VGA text console" if EMBEDDED || !X86
- depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH
+ depends on !ARCH_ACORN && !ARCH_EBSA110 && !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && !ARCH_VERSATILE && !SUPERH && !BFIN
default y
help
Saying Y here will allow you to use Linux in text mode through a
u32 ulCoreClock;
u32 tmp;
u32 ulChipSpeed;
- u8 rev;
STG_WRITE_REG(IntMask, 0xFFFF);
PMX2_SOFTRESET_ROM_RST);
pci_read_config_word(pDev, PCI_CONFIG_SUBSYS_ID, &sub);
- pci_read_config_byte(pDev, PCI_REVISION_ID, &rev);
- ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub, (u32)rev);
+ ulChipSpeed = InitSDRAMRegisters(pSTGReg, (u32)sub,
+ (u32)pDev->revision);
if (ulChipSpeed == 0)
return -EINVAL;
static int matroxfb_probe(struct pci_dev* pdev, const struct pci_device_id* dummy) {
struct board* b;
- u_int8_t rev;
u_int16_t svid;
u_int16_t sid;
struct matrox_fb_info* minfo;
#endif
DBG(__FUNCTION__)
- pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
svid = pdev->subsystem_vendor;
sid = pdev->subsystem_device;
for (b = dev_list; b->vendor; b++) {
- if ((b->vendor != pdev->vendor) || (b->device != pdev->device) || (b->rev < rev)) continue;
+ if ((b->vendor != pdev->vendor) || (b->device != pdev->device) || (b->rev < pdev->revision)) continue;
if (b->svid)
if ((b->svid != svid) || (b->sid != sid)) continue;
break;
#define __MATROXFB_CRTC2_H__
#include <linux/ioctl.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
#include "matroxfb_base.h"
struct matroxfb_dh_fb_info {
ivideo->warncount = 0;
ivideo->chip_id = pdev->device;
ivideo->chip_vendor = pdev->vendor;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &ivideo->revision_id);
+ ivideo->revision_id = pdev->revision;
ivideo->SiS_Pr.ChipRevision = ivideo->revision_id;
pci_read_config_word(pdev, PCI_COMMAND, ®16);
ivideo->sisvga_enabled = reg16 & 0x01;
f_ddprintk("found device : %s\n", spec->name);
par->dev = pdev;
- pci_read_config_byte(pdev, PCI_REVISION_ID, &par->revision);
+ par->revision = pdev->revision;
fix->mmio_start = pci_resource_start(pdev,0);
fix->mmio_len = 0x400000;
par->tga_regs_base = mem_base + TGA_REGS_OFFSET;
par->tga_type = tga_type;
if (tga_bus_pci)
- pci_read_config_byte(to_pci_dev(dev), PCI_REVISION_ID,
- &par->tga_chip_rev);
+ par->tga_chip_rev = (to_pci_dev(dev))->revision;
if (tga_bus_tc)
par->tga_chip_rev = TGA_READ_REG(par, TGA_START_REG) & 0xff;
}
#endif /* CONFIG_W1_SLAVE_DS2433_CRC */
-static ssize_t w1_f23_read_bin(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+static ssize_t w1_f23_read_bin(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
return 0;
}
-static ssize_t w1_f23_write_bin(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+static ssize_t w1_f23_write_bin(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
int addr, len, idx;
.attr = {
.name = "eeprom",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = W1_EEPROM_SIZE,
.read = w1_f23_read_bin,
{}
};
-static ssize_t w1_therm_read_bin(struct kobject *, char *, loff_t, size_t);
+static ssize_t w1_therm_read_bin(struct kobject *, struct bin_attribute *,
+ char *, loff_t, size_t);
static struct bin_attribute w1_therm_bin_attr = {
.attr = {
.name = "w1_slave",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = W1_SLAVE_DATA_SIZE,
.read = w1_therm_read_bin,
return 0;
}
-static ssize_t w1_therm_read_bin(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t w1_therm_read_bin(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
struct w1_master *dev = sl->master;
return sprintf(buf, "%s\n", sl->name);
}
-static ssize_t w1_slave_read_id(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t w1_slave_read_id(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
.attr = {
.name = "id",
.mode = S_IRUGO,
- .owner = THIS_MODULE,
},
.size = 8,
.read = w1_slave_read_id,
/* Default family */
-static ssize_t w1_default_write(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t w1_default_write(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
return count;
}
-static ssize_t w1_default_read(struct kobject *kobj, char *buf, loff_t off, size_t count)
+static ssize_t w1_default_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
.attr = {
.name = "rw",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE,
},
.size = PAGE_SIZE,
.read = w1_default_read,
static DEVICE_ATTR(resource, S_IRUGO, zorro_show_resource, NULL);
-static ssize_t zorro_read_config(struct kobject *kobj, char *buf, loff_t off,
- size_t count)
+static ssize_t zorro_read_config(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct zorro_dev *z = to_zorro_dev(container_of(kobj, struct device,
kobj));
.attr = {
.name = "config",
.mode = S_IRUGO | S_IWUSR,
- .owner = THIS_MODULE
},
.size = sizeof(struct ConfigDev),
.read = zorro_read_config,
}
EXPORT_SYMBOL_GPL(debugfs_remove);
+/**
+ * debugfs_rename - rename a file/directory in the debugfs filesystem
+ * @old_dir: a pointer to the parent dentry for the renamed object. This
+ * should be a directory dentry.
+ * @old_dentry: dentry of an object to be renamed.
+ * @new_dir: a pointer to the parent dentry where the object should be
+ * moved. This should be a directory dentry.
+ * @new_name: a pointer to a string containing the target name.
+ *
+ * This function renames a file/directory in debugfs. The target must not
+ * exist for rename to succeed.
+ *
+ * This function will return a pointer to old_dentry (which is updated to
+ * reflect renaming) if it succeeds. If an error occurs, %NULL will be
+ * returned.
+ *
+ * If debugfs is not enabled in the kernel, the value -%ENODEV will be
+ * returned.
+ */
+struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
+ struct dentry *new_dir, const char *new_name)
+{
+ int error;
+ struct dentry *dentry = NULL, *trap;
+ const char *old_name;
+
+ trap = lock_rename(new_dir, old_dir);
+ /* Source or destination directories don't exist? */
+ if (!old_dir->d_inode || !new_dir->d_inode)
+ goto exit;
+ /* Source does not exist, cyclic rename, or mountpoint? */
+ if (!old_dentry->d_inode || old_dentry == trap ||
+ d_mountpoint(old_dentry))
+ goto exit;
+ dentry = lookup_one_len(new_name, new_dir, strlen(new_name));
+ /* Lookup failed, cyclic rename or target exists? */
+ if (IS_ERR(dentry) || dentry == trap || dentry->d_inode)
+ goto exit;
+
+ old_name = fsnotify_oldname_init(old_dentry->d_name.name);
+
+ error = simple_rename(old_dir->d_inode, old_dentry, new_dir->d_inode,
+ dentry);
+ if (error) {
+ fsnotify_oldname_free(old_name);
+ goto exit;
+ }
+ d_move(old_dentry, dentry);
+ fsnotify_move(old_dir->d_inode, new_dir->d_inode, old_name,
+ old_dentry->d_name.name, S_ISDIR(old_dentry->d_inode->i_mode),
+ NULL, old_dentry->d_inode);
+ fsnotify_oldname_free(old_name);
+ unlock_rename(new_dir, old_dir);
+ dput(dentry);
+ return old_dentry;
+exit:
+ if (dentry && !IS_ERR(dentry))
+ dput(dentry);
+ unlock_rename(new_dir, old_dir);
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(debugfs_rename);
+
static decl_subsys(debug, NULL, NULL);
static int __init debugfs_init(void)
goto out;
}
kobj_set_kset_s(&ecryptfs_subsys, fs_subsys);
- sysfs_attr_version.attr.owner = THIS_MODULE;
- sysfs_attr_version_str.attr.owner = THIS_MODULE;
rc = do_sysfs_registration();
if (rc) {
printk(KERN_ERR "sysfs registration failed\n");
#define define_mask(_name) { \
.attr = { \
.name = #_name, \
- .owner = THIS_MODULE, \
.mode = S_IRUGO | S_IWUSR, \
}, \
.mask = ML_##_name, \
static struct attribute addpartattr = {
.name = "whole_disk",
.mode = S_IRUSR | S_IRGRP | S_IROTH,
- .owner = THIS_MODULE,
};
sysfs_create_file(&p->kobj, &addpartattr);
#include "sysfs.h"
+struct bin_buffer {
+ struct mutex mutex;
+ void *buffer;
+ int mmapped;
+};
+
static int
fill_read(struct dentry *dentry, char *buffer, loff_t off, size_t count)
{
- struct bin_attribute * attr = to_bin_attr(dentry);
- struct kobject * kobj = to_kobj(dentry->d_parent);
+ struct sysfs_dirent *attr_sd = dentry->d_fsdata;
+ struct bin_attribute *attr = attr_sd->s_elem.bin_attr.bin_attr;
+ struct kobject *kobj = attr_sd->s_parent->s_elem.dir.kobj;
+ int rc;
+
+ /* need attr_sd for attr, its parent for kobj */
+ if (!sysfs_get_active_two(attr_sd))
+ return -ENODEV;
- if (!attr->read)
- return -EIO;
+ rc = -EIO;
+ if (attr->read)
+ rc = attr->read(kobj, attr, buffer, off, count);
- return attr->read(kobj, buffer, off, count);
+ sysfs_put_active_two(attr_sd);
+
+ return rc;
}
static ssize_t
-read(struct file * file, char __user * userbuf, size_t count, loff_t * off)
+read(struct file *file, char __user *userbuf, size_t bytes, loff_t *off)
{
- char *buffer = file->private_data;
+ struct bin_buffer *bb = file->private_data;
struct dentry *dentry = file->f_path.dentry;
int size = dentry->d_inode->i_size;
loff_t offs = *off;
- int ret;
-
- if (count > PAGE_SIZE)
- count = PAGE_SIZE;
+ int count = min_t(size_t, bytes, PAGE_SIZE);
if (size) {
if (offs > size)
count = size - offs;
}
- ret = fill_read(dentry, buffer, offs, count);
- if (ret < 0)
- return ret;
- count = ret;
+ mutex_lock(&bb->mutex);
+
+ count = fill_read(dentry, bb->buffer, offs, count);
+ if (count < 0)
+ goto out_unlock;
- if (copy_to_user(userbuf, buffer, count))
- return -EFAULT;
+ if (copy_to_user(userbuf, bb->buffer, count)) {
+ count = -EFAULT;
+ goto out_unlock;
+ }
- pr_debug("offs = %lld, *off = %lld, count = %zd\n", offs, *off, count);
+ pr_debug("offs = %lld, *off = %lld, count = %d\n", offs, *off, count);
*off = offs + count;
+ out_unlock:
+ mutex_unlock(&bb->mutex);
return count;
}
static int
flush_write(struct dentry *dentry, char *buffer, loff_t offset, size_t count)
{
- struct bin_attribute *attr = to_bin_attr(dentry);
- struct kobject *kobj = to_kobj(dentry->d_parent);
+ struct sysfs_dirent *attr_sd = dentry->d_fsdata;
+ struct bin_attribute *attr = attr_sd->s_elem.bin_attr.bin_attr;
+ struct kobject *kobj = attr_sd->s_parent->s_elem.dir.kobj;
+ int rc;
+
+ /* need attr_sd for attr, its parent for kobj */
+ if (!sysfs_get_active_two(attr_sd))
+ return -ENODEV;
+
+ rc = -EIO;
+ if (attr->write)
+ rc = attr->write(kobj, attr, buffer, offset, count);
- if (!attr->write)
- return -EIO;
+ sysfs_put_active_two(attr_sd);
- return attr->write(kobj, buffer, offset, count);
+ return rc;
}
-static ssize_t write(struct file * file, const char __user * userbuf,
- size_t count, loff_t * off)
+static ssize_t write(struct file *file, const char __user *userbuf,
+ size_t bytes, loff_t *off)
{
- char *buffer = file->private_data;
+ struct bin_buffer *bb = file->private_data;
struct dentry *dentry = file->f_path.dentry;
int size = dentry->d_inode->i_size;
loff_t offs = *off;
+ int count = min_t(size_t, bytes, PAGE_SIZE);
- if (count > PAGE_SIZE)
- count = PAGE_SIZE;
if (size) {
if (offs > size)
return 0;
count = size - offs;
}
- if (copy_from_user(buffer, userbuf, count))
- return -EFAULT;
+ mutex_lock(&bb->mutex);
- count = flush_write(dentry, buffer, offs, count);
+ if (copy_from_user(bb->buffer, userbuf, count)) {
+ count = -EFAULT;
+ goto out_unlock;
+ }
+
+ count = flush_write(dentry, bb->buffer, offs, count);
if (count > 0)
*off = offs + count;
+
+ out_unlock:
+ mutex_unlock(&bb->mutex);
return count;
}
static int mmap(struct file *file, struct vm_area_struct *vma)
{
- struct dentry *dentry = file->f_path.dentry;
- struct bin_attribute *attr = to_bin_attr(dentry);
- struct kobject *kobj = to_kobj(dentry->d_parent);
+ struct bin_buffer *bb = file->private_data;
+ struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
+ struct bin_attribute *attr = attr_sd->s_elem.bin_attr.bin_attr;
+ struct kobject *kobj = attr_sd->s_parent->s_elem.dir.kobj;
+ int rc;
+
+ mutex_lock(&bb->mutex);
+
+ /* need attr_sd for attr, its parent for kobj */
+ if (!sysfs_get_active_two(attr_sd))
+ return -ENODEV;
- if (!attr->mmap)
- return -EINVAL;
+ rc = -EINVAL;
+ if (attr->mmap)
+ rc = attr->mmap(kobj, attr, vma);
- return attr->mmap(kobj, attr, vma);
+ if (rc == 0 && !bb->mmapped)
+ bb->mmapped = 1;
+ else
+ sysfs_put_active_two(attr_sd);
+
+ mutex_unlock(&bb->mutex);
+
+ return rc;
}
static int open(struct inode * inode, struct file * file)
{
- struct kobject *kobj = sysfs_get_kobject(file->f_path.dentry->d_parent);
- struct bin_attribute * attr = to_bin_attr(file->f_path.dentry);
- int error = -EINVAL;
-
- if (!kobj || !attr)
- goto Done;
+ struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
+ struct bin_attribute *attr = attr_sd->s_elem.bin_attr.bin_attr;
+ struct bin_buffer *bb = NULL;
+ int error;
- /* Grab the module reference for this attribute if we have one */
- error = -ENODEV;
- if (!try_module_get(attr->attr.owner))
- goto Done;
+ /* need attr_sd for attr */
+ if (!sysfs_get_active(attr_sd))
+ return -ENODEV;
error = -EACCES;
if ((file->f_mode & FMODE_WRITE) && !(attr->write || attr->mmap))
- goto Error;
+ goto err_out;
if ((file->f_mode & FMODE_READ) && !(attr->read || attr->mmap))
- goto Error;
+ goto err_out;
error = -ENOMEM;
- file->private_data = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!file->private_data)
- goto Error;
-
- error = 0;
- goto Done;
-
- Error:
- module_put(attr->attr.owner);
- Done:
- if (error)
- kobject_put(kobj);
+ bb = kzalloc(sizeof(*bb), GFP_KERNEL);
+ if (!bb)
+ goto err_out;
+
+ bb->buffer = kmalloc(PAGE_SIZE, GFP_KERNEL);
+ if (!bb->buffer)
+ goto err_out;
+
+ mutex_init(&bb->mutex);
+ file->private_data = bb;
+
+ /* open succeeded, put active reference and pin attr_sd */
+ sysfs_put_active(attr_sd);
+ sysfs_get(attr_sd);
+ return 0;
+
+ err_out:
+ sysfs_put_active(attr_sd);
+ kfree(bb);
return error;
}
static int release(struct inode * inode, struct file * file)
{
- struct kobject * kobj = to_kobj(file->f_path.dentry->d_parent);
- struct bin_attribute * attr = to_bin_attr(file->f_path.dentry);
- u8 * buffer = file->private_data;
-
- kobject_put(kobj);
- module_put(attr->attr.owner);
- kfree(buffer);
+ struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
+ struct bin_buffer *bb = file->private_data;
+
+ if (bb->mmapped)
+ sysfs_put_active_two(attr_sd);
+ sysfs_put(attr_sd);
+ kfree(bb->buffer);
+ kfree(bb);
return 0;
}
int sysfs_create_bin_file(struct kobject * kobj, struct bin_attribute * attr)
{
- BUG_ON(!kobj || !kobj->dentry || !attr);
+ BUG_ON(!kobj || !kobj->sd || !attr);
- return sysfs_add_file(kobj->dentry, &attr->attr, SYSFS_KOBJ_BIN_ATTR);
+ return sysfs_add_file(kobj->sd, &attr->attr, SYSFS_KOBJ_BIN_ATTR);
}
void sysfs_remove_bin_file(struct kobject * kobj, struct bin_attribute * attr)
{
- if (sysfs_hash_and_remove(kobj->dentry, attr->attr.name) < 0) {
+ if (sysfs_hash_and_remove(kobj->sd, attr->attr.name) < 0) {
printk(KERN_ERR "%s: "
"bad dentry or inode or no such file: \"%s\"\n",
__FUNCTION__, attr->attr.name);
#include <linux/module.h>
#include <linux/kobject.h>
#include <linux/namei.h>
+#include <linux/idr.h>
+#include <linux/completion.h>
#include <asm/semaphore.h>
#include "sysfs.h"
-DECLARE_RWSEM(sysfs_rename_sem);
-spinlock_t sysfs_lock = SPIN_LOCK_UNLOCKED;
+DEFINE_MUTEX(sysfs_mutex);
+spinlock_t sysfs_assoc_lock = SPIN_LOCK_UNLOCKED;
+
+static spinlock_t sysfs_ino_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_IDA(sysfs_ino_ida);
+
+/**
+ * sysfs_link_sibling - link sysfs_dirent into sibling list
+ * @sd: sysfs_dirent of interest
+ *
+ * Link @sd into its sibling list which starts from
+ * sd->s_parent->s_children.
+ *
+ * Locking:
+ * mutex_lock(sysfs_mutex)
+ */
+void sysfs_link_sibling(struct sysfs_dirent *sd)
+{
+ struct sysfs_dirent *parent_sd = sd->s_parent;
+
+ BUG_ON(sd->s_sibling);
+ sd->s_sibling = parent_sd->s_children;
+ parent_sd->s_children = sd;
+}
+
+/**
+ * sysfs_unlink_sibling - unlink sysfs_dirent from sibling list
+ * @sd: sysfs_dirent of interest
+ *
+ * Unlink @sd from its sibling list which starts from
+ * sd->s_parent->s_children.
+ *
+ * Locking:
+ * mutex_lock(sysfs_mutex)
+ */
+void sysfs_unlink_sibling(struct sysfs_dirent *sd)
+{
+ struct sysfs_dirent **pos;
+
+ for (pos = &sd->s_parent->s_children; *pos; pos = &(*pos)->s_sibling) {
+ if (*pos == sd) {
+ *pos = sd->s_sibling;
+ sd->s_sibling = NULL;
+ break;
+ }
+ }
+}
+
+/**
+ * sysfs_get_dentry - get dentry for the given sysfs_dirent
+ * @sd: sysfs_dirent of interest
+ *
+ * Get dentry for @sd. Dentry is looked up if currently not
+ * present. This function climbs sysfs_dirent tree till it
+ * reaches a sysfs_dirent with valid dentry attached and descends
+ * down from there looking up dentry for each step.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ *
+ * RETURNS:
+ * Pointer to found dentry on success, ERR_PTR() value on error.
+ */
+struct dentry *sysfs_get_dentry(struct sysfs_dirent *sd)
+{
+ struct sysfs_dirent *cur;
+ struct dentry *parent_dentry, *dentry;
+ int i, depth;
+
+ /* Find the first parent which has valid s_dentry and get the
+ * dentry.
+ */
+ mutex_lock(&sysfs_mutex);
+ restart0:
+ spin_lock(&sysfs_assoc_lock);
+ restart1:
+ spin_lock(&dcache_lock);
+
+ dentry = NULL;
+ depth = 0;
+ cur = sd;
+ while (!cur->s_dentry || !cur->s_dentry->d_inode) {
+ if (cur->s_flags & SYSFS_FLAG_REMOVED) {
+ dentry = ERR_PTR(-ENOENT);
+ depth = 0;
+ break;
+ }
+ cur = cur->s_parent;
+ depth++;
+ }
+ if (!IS_ERR(dentry))
+ dentry = dget_locked(cur->s_dentry);
+
+ spin_unlock(&dcache_lock);
+ spin_unlock(&sysfs_assoc_lock);
+
+ /* from the found dentry, look up depth times */
+ while (depth--) {
+ /* find and get depth'th ancestor */
+ for (cur = sd, i = 0; cur && i < depth; i++)
+ cur = cur->s_parent;
+
+ /* This can happen if tree structure was modified due
+ * to move/rename. Restart.
+ */
+ if (i != depth) {
+ dput(dentry);
+ goto restart0;
+ }
+
+ sysfs_get(cur);
+
+ mutex_unlock(&sysfs_mutex);
+
+ /* look it up */
+ parent_dentry = dentry;
+ dentry = lookup_one_len_kern(cur->s_name, parent_dentry,
+ strlen(cur->s_name));
+ dput(parent_dentry);
+
+ if (IS_ERR(dentry)) {
+ sysfs_put(cur);
+ return dentry;
+ }
+
+ mutex_lock(&sysfs_mutex);
+ spin_lock(&sysfs_assoc_lock);
+
+ /* This, again, can happen if tree structure has
+ * changed and we looked up the wrong thing. Restart.
+ */
+ if (cur->s_dentry != dentry) {
+ dput(dentry);
+ sysfs_put(cur);
+ goto restart1;
+ }
+
+ spin_unlock(&sysfs_assoc_lock);
+
+ sysfs_put(cur);
+ }
+
+ mutex_unlock(&sysfs_mutex);
+ return dentry;
+}
+
+/**
+ * sysfs_get_active - get an active reference to sysfs_dirent
+ * @sd: sysfs_dirent to get an active reference to
+ *
+ * Get an active reference of @sd. This function is noop if @sd
+ * is NULL.
+ *
+ * RETURNS:
+ * Pointer to @sd on success, NULL on failure.
+ */
+struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd)
+{
+ if (unlikely(!sd))
+ return NULL;
+
+ while (1) {
+ int v, t;
+
+ v = atomic_read(&sd->s_active);
+ if (unlikely(v < 0))
+ return NULL;
+
+ t = atomic_cmpxchg(&sd->s_active, v, v + 1);
+ if (likely(t == v))
+ return sd;
+ if (t < 0)
+ return NULL;
+
+ cpu_relax();
+ }
+}
+
+/**
+ * sysfs_put_active - put an active reference to sysfs_dirent
+ * @sd: sysfs_dirent to put an active reference to
+ *
+ * Put an active reference to @sd. This function is noop if @sd
+ * is NULL.
+ */
+void sysfs_put_active(struct sysfs_dirent *sd)
+{
+ struct completion *cmpl;
+ int v;
+
+ if (unlikely(!sd))
+ return;
+
+ v = atomic_dec_return(&sd->s_active);
+ if (likely(v != SD_DEACTIVATED_BIAS))
+ return;
+
+ /* atomic_dec_return() is a mb(), we'll always see the updated
+ * sd->s_sibling.
+ */
+ cmpl = (void *)sd->s_sibling;
+ complete(cmpl);
+}
+
+/**
+ * sysfs_get_active_two - get active references to sysfs_dirent and parent
+ * @sd: sysfs_dirent of interest
+ *
+ * Get active reference to @sd and its parent. Parent's active
+ * reference is grabbed first. This function is noop if @sd is
+ * NULL.
+ *
+ * RETURNS:
+ * Pointer to @sd on success, NULL on failure.
+ */
+struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd)
+{
+ if (sd) {
+ if (sd->s_parent && unlikely(!sysfs_get_active(sd->s_parent)))
+ return NULL;
+ if (unlikely(!sysfs_get_active(sd))) {
+ sysfs_put_active(sd->s_parent);
+ return NULL;
+ }
+ }
+ return sd;
+}
+
+/**
+ * sysfs_put_active_two - put active references to sysfs_dirent and parent
+ * @sd: sysfs_dirent of interest
+ *
+ * Put active references to @sd and its parent. This function is
+ * noop if @sd is NULL.
+ */
+void sysfs_put_active_two(struct sysfs_dirent *sd)
+{
+ if (sd) {
+ sysfs_put_active(sd);
+ sysfs_put_active(sd->s_parent);
+ }
+}
+
+/**
+ * sysfs_deactivate - deactivate sysfs_dirent
+ * @sd: sysfs_dirent to deactivate
+ *
+ * Deny new active references and drain existing ones.
+ */
+static void sysfs_deactivate(struct sysfs_dirent *sd)
+{
+ DECLARE_COMPLETION_ONSTACK(wait);
+ int v;
+
+ BUG_ON(sd->s_sibling || !(sd->s_flags & SYSFS_FLAG_REMOVED));
+ sd->s_sibling = (void *)&wait;
+
+ /* atomic_add_return() is a mb(), put_active() will always see
+ * the updated sd->s_sibling.
+ */
+ v = atomic_add_return(SD_DEACTIVATED_BIAS, &sd->s_active);
+
+ if (v != SD_DEACTIVATED_BIAS)
+ wait_for_completion(&wait);
+
+ sd->s_sibling = NULL;
+}
+
+static int sysfs_alloc_ino(ino_t *pino)
+{
+ int ino, rc;
+
+ retry:
+ spin_lock(&sysfs_ino_lock);
+ rc = ida_get_new_above(&sysfs_ino_ida, 2, &ino);
+ spin_unlock(&sysfs_ino_lock);
+
+ if (rc == -EAGAIN) {
+ if (ida_pre_get(&sysfs_ino_ida, GFP_KERNEL))
+ goto retry;
+ rc = -ENOMEM;
+ }
+
+ *pino = ino;
+ return rc;
+}
+
+static void sysfs_free_ino(ino_t ino)
+{
+ spin_lock(&sysfs_ino_lock);
+ ida_remove(&sysfs_ino_ida, ino);
+ spin_unlock(&sysfs_ino_lock);
+}
+
+void release_sysfs_dirent(struct sysfs_dirent * sd)
+{
+ struct sysfs_dirent *parent_sd;
+
+ repeat:
+ /* Moving/renaming is always done while holding reference.
+ * sd->s_parent won't change beneath us.
+ */
+ parent_sd = sd->s_parent;
+
+ if (sysfs_type(sd) == SYSFS_KOBJ_LINK)
+ sysfs_put(sd->s_elem.symlink.target_sd);
+ if (sysfs_type(sd) & SYSFS_COPY_NAME)
+ kfree(sd->s_name);
+ kfree(sd->s_iattr);
+ sysfs_free_ino(sd->s_ino);
+ kmem_cache_free(sysfs_dir_cachep, sd);
+
+ sd = parent_sd;
+ if (sd && atomic_dec_and_test(&sd->s_count))
+ goto repeat;
+}
static void sysfs_d_iput(struct dentry * dentry, struct inode * inode)
{
struct sysfs_dirent * sd = dentry->d_fsdata;
if (sd) {
- /* sd->s_dentry is protected with sysfs_lock. This
- * allows sysfs_drop_dentry() to dereference it.
+ /* sd->s_dentry is protected with sysfs_assoc_lock.
+ * This allows sysfs_drop_dentry() to dereference it.
*/
- spin_lock(&sysfs_lock);
+ spin_lock(&sysfs_assoc_lock);
/* The dentry might have been deleted or another
* lookup could have happened updating sd->s_dentry to
*/
if (sd->s_dentry == dentry)
sd->s_dentry = NULL;
- spin_unlock(&sysfs_lock);
+ spin_unlock(&sysfs_assoc_lock);
sysfs_put(sd);
}
iput(inode);
.d_iput = sysfs_d_iput,
};
-static unsigned int sysfs_inode_counter;
-ino_t sysfs_get_inum(void)
+struct sysfs_dirent *sysfs_new_dirent(const char *name, umode_t mode, int type)
{
- if (unlikely(sysfs_inode_counter < 3))
- sysfs_inode_counter = 3;
- return sysfs_inode_counter++;
-}
+ char *dup_name = NULL;
+ struct sysfs_dirent *sd = NULL;
-/*
- * Allocates a new sysfs_dirent and links it to the parent sysfs_dirent
- */
-static struct sysfs_dirent * __sysfs_new_dirent(void * element)
-{
- struct sysfs_dirent * sd;
+ if (type & SYSFS_COPY_NAME) {
+ name = dup_name = kstrdup(name, GFP_KERNEL);
+ if (!name)
+ goto err_out;
+ }
sd = kmem_cache_zalloc(sysfs_dir_cachep, GFP_KERNEL);
if (!sd)
- return NULL;
+ goto err_out;
+
+ if (sysfs_alloc_ino(&sd->s_ino))
+ goto err_out;
- sd->s_ino = sysfs_get_inum();
atomic_set(&sd->s_count, 1);
+ atomic_set(&sd->s_active, 0);
atomic_set(&sd->s_event, 1);
- INIT_LIST_HEAD(&sd->s_children);
- INIT_LIST_HEAD(&sd->s_sibling);
- sd->s_element = element;
+
+ sd->s_name = name;
+ sd->s_mode = mode;
+ sd->s_flags = type;
return sd;
+
+ err_out:
+ kfree(dup_name);
+ kmem_cache_free(sysfs_dir_cachep, sd);
+ return NULL;
}
-static void __sysfs_list_dirent(struct sysfs_dirent *parent_sd,
- struct sysfs_dirent *sd)
+/**
+ * sysfs_attach_dentry - associate sysfs_dirent with dentry
+ * @sd: target sysfs_dirent
+ * @dentry: dentry to associate
+ *
+ * Associate @sd with @dentry. This is protected by
+ * sysfs_assoc_lock to avoid race with sysfs_d_iput().
+ *
+ * LOCKING:
+ * mutex_lock(sysfs_mutex)
+ */
+static void sysfs_attach_dentry(struct sysfs_dirent *sd, struct dentry *dentry)
{
- if (sd)
- list_add(&sd->s_sibling, &parent_sd->s_children);
+ dentry->d_op = &sysfs_dentry_ops;
+ dentry->d_fsdata = sysfs_get(sd);
+
+ /* protect sd->s_dentry against sysfs_d_iput */
+ spin_lock(&sysfs_assoc_lock);
+ sd->s_dentry = dentry;
+ spin_unlock(&sysfs_assoc_lock);
+
+ d_rehash(dentry);
}
-static struct sysfs_dirent * sysfs_new_dirent(struct sysfs_dirent *parent_sd,
- void * element)
+static int sysfs_ilookup_test(struct inode *inode, void *arg)
{
- struct sysfs_dirent *sd;
- sd = __sysfs_new_dirent(element);
- __sysfs_list_dirent(parent_sd, sd);
- return sd;
+ struct sysfs_dirent *sd = arg;
+ return inode->i_ino == sd->s_ino;
}
-/*
+/**
+ * sysfs_addrm_start - prepare for sysfs_dirent add/remove
+ * @acxt: pointer to sysfs_addrm_cxt to be used
+ * @parent_sd: parent sysfs_dirent
*
- * Return -EEXIST if there is already a sysfs element with the same name for
- * the same parent.
+ * This function is called when the caller is about to add or
+ * remove sysfs_dirent under @parent_sd. This function acquires
+ * sysfs_mutex, grabs inode for @parent_sd if available and lock
+ * i_mutex of it. @acxt is used to keep and pass context to
+ * other addrm functions.
*
- * called with parent inode's i_mutex held
+ * LOCKING:
+ * Kernel thread context (may sleep). sysfs_mutex is locked on
+ * return. i_mutex of parent inode is locked on return if
+ * available.
*/
-int sysfs_dirent_exist(struct sysfs_dirent *parent_sd,
- const unsigned char *new)
+void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
+ struct sysfs_dirent *parent_sd)
{
- struct sysfs_dirent * sd;
+ struct inode *inode;
- list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
- if (sd->s_element) {
- const unsigned char *existing = sysfs_get_name(sd);
- if (strcmp(existing, new))
- continue;
- else
- return -EEXIST;
- }
- }
+ memset(acxt, 0, sizeof(*acxt));
+ acxt->parent_sd = parent_sd;
- return 0;
+ /* Lookup parent inode. inode initialization and I_NEW
+ * clearing are protected by sysfs_mutex. By grabbing it and
+ * looking up with _nowait variant, inode state can be
+ * determined reliably.
+ */
+ mutex_lock(&sysfs_mutex);
+
+ inode = ilookup5_nowait(sysfs_sb, parent_sd->s_ino, sysfs_ilookup_test,
+ parent_sd);
+
+ if (inode && !(inode->i_state & I_NEW)) {
+ /* parent inode available */
+ acxt->parent_inode = inode;
+
+ /* sysfs_mutex is below i_mutex in lock hierarchy.
+ * First, trylock i_mutex. If fails, unlock
+ * sysfs_mutex and lock them in order.
+ */
+ if (!mutex_trylock(&inode->i_mutex)) {
+ mutex_unlock(&sysfs_mutex);
+ mutex_lock(&inode->i_mutex);
+ mutex_lock(&sysfs_mutex);
+ }
+ } else
+ iput(inode);
}
+/**
+ * sysfs_add_one - add sysfs_dirent to parent
+ * @acxt: addrm context to use
+ * @sd: sysfs_dirent to be added
+ *
+ * Get @acxt->parent_sd and set sd->s_parent to it and increment
+ * nlink of parent inode if @sd is a directory. @sd is NOT
+ * linked into the children list of the parent. The caller
+ * should invoke sysfs_link_sibling() after this function
+ * completes if @sd needs to be on the children list.
+ *
+ * This function should be called between calls to
+ * sysfs_addrm_start() and sysfs_addrm_finish() and should be
+ * passed the same @acxt as passed to sysfs_addrm_start().
+ *
+ * LOCKING:
+ * Determined by sysfs_addrm_start().
+ */
+void sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
+{
+ sd->s_parent = sysfs_get(acxt->parent_sd);
+
+ if (sysfs_type(sd) == SYSFS_DIR && acxt->parent_inode)
+ inc_nlink(acxt->parent_inode);
+
+ acxt->cnt++;
+}
-static struct sysfs_dirent *
-__sysfs_make_dirent(struct dentry *dentry, void *element, mode_t mode, int type)
+/**
+ * sysfs_remove_one - remove sysfs_dirent from parent
+ * @acxt: addrm context to use
+ * @sd: sysfs_dirent to be added
+ *
+ * Mark @sd removed and drop nlink of parent inode if @sd is a
+ * directory. @sd is NOT unlinked from the children list of the
+ * parent. The caller is repsonsible for removing @sd from the
+ * children list before calling this function.
+ *
+ * This function should be called between calls to
+ * sysfs_addrm_start() and sysfs_addrm_finish() and should be
+ * passed the same @acxt as passed to sysfs_addrm_start().
+ *
+ * LOCKING:
+ * Determined by sysfs_addrm_start().
+ */
+void sysfs_remove_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
{
- struct sysfs_dirent * sd;
+ BUG_ON(sd->s_sibling || (sd->s_flags & SYSFS_FLAG_REMOVED));
- sd = __sysfs_new_dirent(element);
- if (!sd)
- goto out;
+ sd->s_flags |= SYSFS_FLAG_REMOVED;
+ sd->s_sibling = acxt->removed;
+ acxt->removed = sd;
- sd->s_mode = mode;
- sd->s_type = type;
- sd->s_dentry = dentry;
- if (dentry) {
- dentry->d_fsdata = sysfs_get(sd);
- dentry->d_op = &sysfs_dentry_ops;
- }
+ if (sysfs_type(sd) == SYSFS_DIR && acxt->parent_inode)
+ drop_nlink(acxt->parent_inode);
-out:
- return sd;
+ acxt->cnt++;
}
-int sysfs_make_dirent(struct sysfs_dirent * parent_sd, struct dentry * dentry,
- void * element, umode_t mode, int type)
+/**
+ * sysfs_drop_dentry - drop dentry for the specified sysfs_dirent
+ * @sd: target sysfs_dirent
+ *
+ * Drop dentry for @sd. @sd must have been unlinked from its
+ * parent on entry to this function such that it can't be looked
+ * up anymore.
+ *
+ * @sd->s_dentry which is protected with sysfs_assoc_lock points
+ * to the currently associated dentry but we're not holding a
+ * reference to it and racing with dput(). Grab dcache_lock and
+ * verify dentry before dropping it. If @sd->s_dentry is NULL or
+ * dput() beats us, no need to bother.
+ */
+static void sysfs_drop_dentry(struct sysfs_dirent *sd)
{
- struct sysfs_dirent *sd;
+ struct dentry *dentry = NULL;
+ struct inode *inode;
+
+ /* We're not holding a reference to ->s_dentry dentry but the
+ * field will stay valid as long as sysfs_assoc_lock is held.
+ */
+ spin_lock(&sysfs_assoc_lock);
+ spin_lock(&dcache_lock);
+
+ /* drop dentry if it's there and dput() didn't kill it yet */
+ if (sd->s_dentry && sd->s_dentry->d_inode) {
+ dentry = dget_locked(sd->s_dentry);
+ spin_lock(&dentry->d_lock);
+ __d_drop(dentry);
+ spin_unlock(&dentry->d_lock);
+ }
- sd = __sysfs_make_dirent(dentry, element, mode, type);
- __sysfs_list_dirent(parent_sd, sd);
+ spin_unlock(&dcache_lock);
+ spin_unlock(&sysfs_assoc_lock);
- return sd ? 0 : -ENOMEM;
+ /* dentries for shadowed inodes are pinned, unpin */
+ if (dentry && sysfs_is_shadowed_inode(dentry->d_inode))
+ dput(dentry);
+ dput(dentry);
+
+ /* adjust nlink and update timestamp */
+ inode = ilookup(sysfs_sb, sd->s_ino);
+ if (inode) {
+ mutex_lock(&inode->i_mutex);
+
+ inode->i_ctime = CURRENT_TIME;
+ drop_nlink(inode);
+ if (sysfs_type(sd) == SYSFS_DIR)
+ drop_nlink(inode);
+
+ mutex_unlock(&inode->i_mutex);
+ iput(inode);
+ }
}
-static int init_dir(struct inode * inode)
+/**
+ * sysfs_addrm_finish - finish up sysfs_dirent add/remove
+ * @acxt: addrm context to finish up
+ *
+ * Finish up sysfs_dirent add/remove. Resources acquired by
+ * sysfs_addrm_start() are released and removed sysfs_dirents are
+ * cleaned up. Timestamps on the parent inode are updated.
+ *
+ * LOCKING:
+ * All mutexes acquired by sysfs_addrm_start() are released.
+ *
+ * RETURNS:
+ * Number of added/removed sysfs_dirents since sysfs_addrm_start().
+ */
+int sysfs_addrm_finish(struct sysfs_addrm_cxt *acxt)
{
- inode->i_op = &sysfs_dir_inode_operations;
- inode->i_fop = &sysfs_dir_operations;
+ /* release resources acquired by sysfs_addrm_start() */
+ mutex_unlock(&sysfs_mutex);
+ if (acxt->parent_inode) {
+ struct inode *inode = acxt->parent_inode;
- /* directory inodes start off with i_nlink == 2 (for "." entry) */
- inc_nlink(inode);
- return 0;
+ /* if added/removed, update timestamps on the parent */
+ if (acxt->cnt)
+ inode->i_ctime = inode->i_mtime = CURRENT_TIME;
+
+ mutex_unlock(&inode->i_mutex);
+ iput(inode);
+ }
+
+ /* kill removed sysfs_dirents */
+ while (acxt->removed) {
+ struct sysfs_dirent *sd = acxt->removed;
+
+ acxt->removed = sd->s_sibling;
+ sd->s_sibling = NULL;
+
+ sysfs_drop_dentry(sd);
+ sysfs_deactivate(sd);
+ sysfs_put(sd);
+ }
+
+ return acxt->cnt;
}
-static int init_file(struct inode * inode)
+/**
+ * sysfs_find_dirent - find sysfs_dirent with the given name
+ * @parent_sd: sysfs_dirent to search under
+ * @name: name to look for
+ *
+ * Look for sysfs_dirent with name @name under @parent_sd.
+ *
+ * LOCKING:
+ * mutex_lock(sysfs_mutex)
+ *
+ * RETURNS:
+ * Pointer to sysfs_dirent if found, NULL if not.
+ */
+struct sysfs_dirent *sysfs_find_dirent(struct sysfs_dirent *parent_sd,
+ const unsigned char *name)
{
- inode->i_size = PAGE_SIZE;
- inode->i_fop = &sysfs_file_operations;
- return 0;
+ struct sysfs_dirent *sd;
+
+ for (sd = parent_sd->s_children; sd; sd = sd->s_sibling)
+ if (sysfs_type(sd) && !strcmp(sd->s_name, name))
+ return sd;
+ return NULL;
}
-static int init_symlink(struct inode * inode)
+/**
+ * sysfs_get_dirent - find and get sysfs_dirent with the given name
+ * @parent_sd: sysfs_dirent to search under
+ * @name: name to look for
+ *
+ * Look for sysfs_dirent with name @name under @parent_sd and get
+ * it if found.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep). Grabs sysfs_mutex.
+ *
+ * RETURNS:
+ * Pointer to sysfs_dirent if found, NULL if not.
+ */
+struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
+ const unsigned char *name)
{
- inode->i_op = &sysfs_symlink_inode_operations;
- return 0;
+ struct sysfs_dirent *sd;
+
+ mutex_lock(&sysfs_mutex);
+ sd = sysfs_find_dirent(parent_sd, name);
+ sysfs_get(sd);
+ mutex_unlock(&sysfs_mutex);
+
+ return sd;
}
-static int create_dir(struct kobject * k, struct dentry * p,
- const char * n, struct dentry ** d)
+static int create_dir(struct kobject *kobj, struct sysfs_dirent *parent_sd,
+ const char *name, struct sysfs_dirent **p_sd)
{
- int error;
umode_t mode = S_IFDIR| S_IRWXU | S_IRUGO | S_IXUGO;
+ struct sysfs_addrm_cxt acxt;
+ struct sysfs_dirent *sd;
- mutex_lock(&p->d_inode->i_mutex);
- *d = lookup_one_len(n, p, strlen(n));
- if (!IS_ERR(*d)) {
- if (sysfs_dirent_exist(p->d_fsdata, n))
- error = -EEXIST;
- else
- error = sysfs_make_dirent(p->d_fsdata, *d, k, mode,
- SYSFS_DIR);
- if (!error) {
- error = sysfs_create(*d, mode, init_dir);
- if (!error) {
- inc_nlink(p->d_inode);
- (*d)->d_op = &sysfs_dentry_ops;
- d_rehash(*d);
- }
- }
- if (error && (error != -EEXIST)) {
- struct sysfs_dirent *sd = (*d)->d_fsdata;
- if (sd) {
- list_del_init(&sd->s_sibling);
- sysfs_put(sd);
- }
- d_drop(*d);
- }
- dput(*d);
- } else
- error = PTR_ERR(*d);
- mutex_unlock(&p->d_inode->i_mutex);
- return error;
-}
+ /* allocate */
+ sd = sysfs_new_dirent(name, mode, SYSFS_DIR);
+ if (!sd)
+ return -ENOMEM;
+ sd->s_elem.dir.kobj = kobj;
+ /* link in */
+ sysfs_addrm_start(&acxt, parent_sd);
+ if (!sysfs_find_dirent(parent_sd, name)) {
+ sysfs_add_one(&acxt, sd);
+ sysfs_link_sibling(sd);
+ }
+ if (sysfs_addrm_finish(&acxt)) {
+ *p_sd = sd;
+ return 0;
+ }
-int sysfs_create_subdir(struct kobject * k, const char * n, struct dentry ** d)
+ sysfs_put(sd);
+ return -EEXIST;
+}
+
+int sysfs_create_subdir(struct kobject *kobj, const char *name,
+ struct sysfs_dirent **p_sd)
{
- return create_dir(k,k->dentry,n,d);
+ return create_dir(kobj, kobj->sd, name, p_sd);
}
/**
* sysfs_create_dir - create a directory for an object.
* @kobj: object we're creating directory for.
- * @shadow_parent: parent parent object.
+ * @shadow_parent: parent object.
*/
-
-int sysfs_create_dir(struct kobject * kobj, struct dentry *shadow_parent)
+int sysfs_create_dir(struct kobject *kobj,
+ struct sysfs_dirent *shadow_parent_sd)
{
- struct dentry * dentry = NULL;
- struct dentry * parent;
+ struct sysfs_dirent *parent_sd, *sd;
int error = 0;
BUG_ON(!kobj);
- if (shadow_parent)
- parent = shadow_parent;
+ if (shadow_parent_sd)
+ parent_sd = shadow_parent_sd;
else if (kobj->parent)
- parent = kobj->parent->dentry;
+ parent_sd = kobj->parent->sd;
else if (sysfs_mount && sysfs_mount->mnt_sb)
- parent = sysfs_mount->mnt_sb->s_root;
+ parent_sd = sysfs_mount->mnt_sb->s_root->d_fsdata;
else
return -EFAULT;
- error = create_dir(kobj,parent,kobject_name(kobj),&dentry);
+ error = create_dir(kobj, parent_sd, kobject_name(kobj), &sd);
if (!error)
- kobj->dentry = dentry;
+ kobj->sd = sd;
return error;
}
-/* attaches attribute's sysfs_dirent to the dentry corresponding to the
- * attribute file
- */
-static int sysfs_attach_attr(struct sysfs_dirent * sd, struct dentry * dentry)
+static int sysfs_count_nlink(struct sysfs_dirent *sd)
{
- struct attribute * attr = NULL;
- struct bin_attribute * bin_attr = NULL;
- int (* init) (struct inode *) = NULL;
- int error = 0;
-
- if (sd->s_type & SYSFS_KOBJ_BIN_ATTR) {
- bin_attr = sd->s_element;
- attr = &bin_attr->attr;
- } else {
- attr = sd->s_element;
- init = init_file;
- }
+ struct sysfs_dirent *child;
+ int nr = 0;
- dentry->d_fsdata = sysfs_get(sd);
- /* protect sd->s_dentry against sysfs_d_iput */
- spin_lock(&sysfs_lock);
- sd->s_dentry = dentry;
- spin_unlock(&sysfs_lock);
- error = sysfs_create(dentry, (attr->mode & S_IALLUGO) | S_IFREG, init);
- if (error) {
- sysfs_put(sd);
- return error;
- }
-
- if (bin_attr) {
- dentry->d_inode->i_size = bin_attr->size;
- dentry->d_inode->i_fop = &bin_fops;
- }
- dentry->d_op = &sysfs_dentry_ops;
- d_rehash(dentry);
-
- return 0;
-}
-
-static int sysfs_attach_link(struct sysfs_dirent * sd, struct dentry * dentry)
-{
- int err = 0;
-
- dentry->d_fsdata = sysfs_get(sd);
- /* protect sd->s_dentry against sysfs_d_iput */
- spin_lock(&sysfs_lock);
- sd->s_dentry = dentry;
- spin_unlock(&sysfs_lock);
- err = sysfs_create(dentry, S_IFLNK|S_IRWXUGO, init_symlink);
- if (!err) {
- dentry->d_op = &sysfs_dentry_ops;
- d_rehash(dentry);
- } else
- sysfs_put(sd);
-
- return err;
+ for (child = sd->s_children; child; child = child->s_sibling)
+ if (sysfs_type(child) == SYSFS_DIR)
+ nr++;
+ return nr + 2;
}
static struct dentry * sysfs_lookup(struct inode *dir, struct dentry *dentry,
{
struct sysfs_dirent * parent_sd = dentry->d_parent->d_fsdata;
struct sysfs_dirent * sd;
- int err = 0;
+ struct bin_attribute *bin_attr;
+ struct inode *inode;
+ int found = 0;
- list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
- if (sd->s_type & SYSFS_NOT_PINNED) {
- const unsigned char * name = sysfs_get_name(sd);
+ for (sd = parent_sd->s_children; sd; sd = sd->s_sibling) {
+ if (sysfs_type(sd) &&
+ !strcmp(sd->s_name, dentry->d_name.name)) {
+ found = 1;
+ break;
+ }
+ }
- if (strcmp(name, dentry->d_name.name))
- continue;
+ /* no such entry */
+ if (!found)
+ return NULL;
- if (sd->s_type & SYSFS_KOBJ_LINK)
- err = sysfs_attach_link(sd, dentry);
- else
- err = sysfs_attach_attr(sd, dentry);
+ /* attach dentry and inode */
+ inode = sysfs_get_inode(sd);
+ if (!inode)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_lock(&sysfs_mutex);
+
+ if (inode->i_state & I_NEW) {
+ /* initialize inode according to type */
+ switch (sysfs_type(sd)) {
+ case SYSFS_DIR:
+ inode->i_op = &sysfs_dir_inode_operations;
+ inode->i_fop = &sysfs_dir_operations;
+ inode->i_nlink = sysfs_count_nlink(sd);
+ break;
+ case SYSFS_KOBJ_ATTR:
+ inode->i_size = PAGE_SIZE;
+ inode->i_fop = &sysfs_file_operations;
+ break;
+ case SYSFS_KOBJ_BIN_ATTR:
+ bin_attr = sd->s_elem.bin_attr.bin_attr;
+ inode->i_size = bin_attr->size;
+ inode->i_fop = &bin_fops;
break;
+ case SYSFS_KOBJ_LINK:
+ inode->i_op = &sysfs_symlink_inode_operations;
+ break;
+ default:
+ BUG();
}
}
- return ERR_PTR(err);
+ sysfs_instantiate(dentry, inode);
+ sysfs_attach_dentry(sd, dentry);
+
+ mutex_unlock(&sysfs_mutex);
+
+ return NULL;
}
const struct inode_operations sysfs_dir_inode_operations = {
.setattr = sysfs_setattr,
};
-static void remove_dir(struct dentry * d)
+static void remove_dir(struct sysfs_dirent *sd)
{
- struct dentry * parent = dget(d->d_parent);
- struct sysfs_dirent * sd;
-
- mutex_lock(&parent->d_inode->i_mutex);
- d_delete(d);
- sd = d->d_fsdata;
- list_del_init(&sd->s_sibling);
- sysfs_put(sd);
- if (d->d_inode)
- simple_rmdir(parent->d_inode,d);
-
- pr_debug(" o %s removing done (%d)\n",d->d_name.name,
- atomic_read(&d->d_count));
+ struct sysfs_addrm_cxt acxt;
- mutex_unlock(&parent->d_inode->i_mutex);
- dput(parent);
+ sysfs_addrm_start(&acxt, sd->s_parent);
+ sysfs_unlink_sibling(sd);
+ sysfs_remove_one(&acxt, sd);
+ sysfs_addrm_finish(&acxt);
}
-void sysfs_remove_subdir(struct dentry * d)
+void sysfs_remove_subdir(struct sysfs_dirent *sd)
{
- remove_dir(d);
+ remove_dir(sd);
}
-static void __sysfs_remove_dir(struct dentry *dentry)
+static void __sysfs_remove_dir(struct sysfs_dirent *dir_sd)
{
- struct sysfs_dirent * parent_sd;
- struct sysfs_dirent * sd, * tmp;
+ struct sysfs_addrm_cxt acxt;
+ struct sysfs_dirent **pos;
- dget(dentry);
- if (!dentry)
+ if (!dir_sd)
return;
- pr_debug("sysfs %s: removing dir\n",dentry->d_name.name);
- mutex_lock(&dentry->d_inode->i_mutex);
- parent_sd = dentry->d_fsdata;
- list_for_each_entry_safe(sd, tmp, &parent_sd->s_children, s_sibling) {
- if (!sd->s_element || !(sd->s_type & SYSFS_NOT_PINNED))
- continue;
- list_del_init(&sd->s_sibling);
- sysfs_drop_dentry(sd, dentry);
- sysfs_put(sd);
+ pr_debug("sysfs %s: removing dir\n", dir_sd->s_name);
+ sysfs_addrm_start(&acxt, dir_sd);
+ pos = &dir_sd->s_children;
+ while (*pos) {
+ struct sysfs_dirent *sd = *pos;
+
+ if (sysfs_type(sd) && sysfs_type(sd) != SYSFS_DIR) {
+ *pos = sd->s_sibling;
+ sd->s_sibling = NULL;
+ sysfs_remove_one(&acxt, sd);
+ } else
+ pos = &(*pos)->s_sibling;
}
- mutex_unlock(&dentry->d_inode->i_mutex);
+ sysfs_addrm_finish(&acxt);
- remove_dir(dentry);
- /**
- * Drop reference from dget() on entrance.
- */
- dput(dentry);
+ remove_dir(dir_sd);
}
/**
void sysfs_remove_dir(struct kobject * kobj)
{
- __sysfs_remove_dir(kobj->dentry);
- kobj->dentry = NULL;
+ struct sysfs_dirent *sd = kobj->sd;
+
+ spin_lock(&sysfs_assoc_lock);
+ kobj->sd = NULL;
+ spin_unlock(&sysfs_assoc_lock);
+
+ __sysfs_remove_dir(sd);
}
-int sysfs_rename_dir(struct kobject * kobj, struct dentry *new_parent,
+int sysfs_rename_dir(struct kobject *kobj, struct sysfs_dirent *new_parent_sd,
const char *new_name)
{
- int error = 0;
- struct dentry * new_dentry;
+ struct sysfs_dirent *sd = kobj->sd;
+ struct dentry *new_parent = NULL;
+ struct dentry *old_dentry = NULL, *new_dentry = NULL;
+ const char *dup_name = NULL;
+ int error;
- if (!new_parent)
- return -EFAULT;
+ /* get dentries */
+ old_dentry = sysfs_get_dentry(sd);
+ if (IS_ERR(old_dentry)) {
+ error = PTR_ERR(old_dentry);
+ goto out_dput;
+ }
- down_write(&sysfs_rename_sem);
+ new_parent = sysfs_get_dentry(new_parent_sd);
+ if (IS_ERR(new_parent)) {
+ error = PTR_ERR(new_parent);
+ goto out_dput;
+ }
+
+ /* lock new_parent and get dentry for new name */
mutex_lock(&new_parent->d_inode->i_mutex);
new_dentry = lookup_one_len(new_name, new_parent, strlen(new_name));
- if (!IS_ERR(new_dentry)) {
- /* By allowing two different directories with the
- * same d_parent we allow this routine to move
- * between different shadows of the same directory
- */
- if (kobj->dentry->d_parent->d_inode != new_parent->d_inode)
- return -EINVAL;
- else if (new_dentry->d_parent->d_inode != new_parent->d_inode)
- error = -EINVAL;
- else if (new_dentry == kobj->dentry)
- error = -EINVAL;
- else if (!new_dentry->d_inode) {
- error = kobject_set_name(kobj, "%s", new_name);
- if (!error) {
- struct sysfs_dirent *sd, *parent_sd;
-
- d_add(new_dentry, NULL);
- d_move(kobj->dentry, new_dentry);
-
- sd = kobj->dentry->d_fsdata;
- parent_sd = new_parent->d_fsdata;
-
- list_del_init(&sd->s_sibling);
- list_add(&sd->s_sibling, &parent_sd->s_children);
- }
- else
- d_drop(new_dentry);
- } else
- error = -EEXIST;
- dput(new_dentry);
+ if (IS_ERR(new_dentry)) {
+ error = PTR_ERR(new_dentry);
+ goto out_unlock;
}
- mutex_unlock(&new_parent->d_inode->i_mutex);
- up_write(&sysfs_rename_sem);
+ /* By allowing two different directories with the same
+ * d_parent we allow this routine to move between different
+ * shadows of the same directory
+ */
+ error = -EINVAL;
+ if (old_dentry->d_parent->d_inode != new_parent->d_inode ||
+ new_dentry->d_parent->d_inode != new_parent->d_inode ||
+ old_dentry == new_dentry)
+ goto out_unlock;
+
+ error = -EEXIST;
+ if (new_dentry->d_inode)
+ goto out_unlock;
+
+ /* rename kobject and sysfs_dirent */
+ error = -ENOMEM;
+ new_name = dup_name = kstrdup(new_name, GFP_KERNEL);
+ if (!new_name)
+ goto out_drop;
+
+ error = kobject_set_name(kobj, "%s", new_name);
+ if (error)
+ goto out_drop;
+
+ dup_name = sd->s_name;
+ sd->s_name = new_name;
+
+ /* move under the new parent */
+ d_add(new_dentry, NULL);
+ d_move(sd->s_dentry, new_dentry);
+
+ mutex_lock(&sysfs_mutex);
+
+ sysfs_unlink_sibling(sd);
+ sysfs_get(new_parent_sd);
+ sysfs_put(sd->s_parent);
+ sd->s_parent = new_parent_sd;
+ sysfs_link_sibling(sd);
+
+ mutex_unlock(&sysfs_mutex);
+
+ error = 0;
+ goto out_unlock;
+
+ out_drop:
+ d_drop(new_dentry);
+ out_unlock:
+ mutex_unlock(&new_parent->d_inode->i_mutex);
+ out_dput:
+ kfree(dup_name);
+ dput(new_parent);
+ dput(old_dentry);
+ dput(new_dentry);
return error;
}
-int sysfs_move_dir(struct kobject *kobj, struct kobject *new_parent)
+int sysfs_move_dir(struct kobject *kobj, struct kobject *new_parent_kobj)
{
- struct dentry *old_parent_dentry, *new_parent_dentry, *new_dentry;
- struct sysfs_dirent *new_parent_sd, *sd;
+ struct sysfs_dirent *sd = kobj->sd;
+ struct sysfs_dirent *new_parent_sd;
+ struct dentry *old_parent, *new_parent = NULL;
+ struct dentry *old_dentry = NULL, *new_dentry = NULL;
int error;
- old_parent_dentry = kobj->parent ?
- kobj->parent->dentry : sysfs_mount->mnt_sb->s_root;
- new_parent_dentry = new_parent ?
- new_parent->dentry : sysfs_mount->mnt_sb->s_root;
+ BUG_ON(!sd->s_parent);
+ new_parent_sd = new_parent_kobj->sd ? new_parent_kobj->sd : &sysfs_root;
+
+ /* get dentries */
+ old_dentry = sysfs_get_dentry(sd);
+ if (IS_ERR(old_dentry)) {
+ error = PTR_ERR(old_dentry);
+ goto out_dput;
+ }
+ old_parent = sd->s_parent->s_dentry;
+
+ new_parent = sysfs_get_dentry(new_parent_sd);
+ if (IS_ERR(new_parent)) {
+ error = PTR_ERR(new_parent);
+ goto out_dput;
+ }
- if (old_parent_dentry->d_inode == new_parent_dentry->d_inode)
- return 0; /* nothing to move */
+ if (old_parent->d_inode == new_parent->d_inode) {
+ error = 0;
+ goto out_dput; /* nothing to move */
+ }
again:
- mutex_lock(&old_parent_dentry->d_inode->i_mutex);
- if (!mutex_trylock(&new_parent_dentry->d_inode->i_mutex)) {
- mutex_unlock(&old_parent_dentry->d_inode->i_mutex);
+ mutex_lock(&old_parent->d_inode->i_mutex);
+ if (!mutex_trylock(&new_parent->d_inode->i_mutex)) {
+ mutex_unlock(&old_parent->d_inode->i_mutex);
goto again;
}
- new_parent_sd = new_parent_dentry->d_fsdata;
- sd = kobj->dentry->d_fsdata;
-
- new_dentry = lookup_one_len(kobj->name, new_parent_dentry,
- strlen(kobj->name));
+ new_dentry = lookup_one_len(kobj->name, new_parent, strlen(kobj->name));
if (IS_ERR(new_dentry)) {
error = PTR_ERR(new_dentry);
- goto out;
+ goto out_unlock;
} else
error = 0;
d_add(new_dentry, NULL);
- d_move(kobj->dentry, new_dentry);
+ d_move(sd->s_dentry, new_dentry);
dput(new_dentry);
/* Remove from old parent's list and insert into new parent's list. */
- list_del_init(&sd->s_sibling);
- list_add(&sd->s_sibling, &new_parent_sd->s_children);
+ mutex_lock(&sysfs_mutex);
+
+ sysfs_unlink_sibling(sd);
+ sysfs_get(new_parent_sd);
+ sysfs_put(sd->s_parent);
+ sd->s_parent = new_parent_sd;
+ sysfs_link_sibling(sd);
-out:
- mutex_unlock(&new_parent_dentry->d_inode->i_mutex);
- mutex_unlock(&old_parent_dentry->d_inode->i_mutex);
+ mutex_unlock(&sysfs_mutex);
+ out_unlock:
+ mutex_unlock(&new_parent->d_inode->i_mutex);
+ mutex_unlock(&old_parent->d_inode->i_mutex);
+ out_dput:
+ dput(new_parent);
+ dput(old_dentry);
+ dput(new_dentry);
return error;
}
{
struct dentry * dentry = file->f_path.dentry;
struct sysfs_dirent * parent_sd = dentry->d_fsdata;
+ struct sysfs_dirent * sd;
- mutex_lock(&dentry->d_inode->i_mutex);
- file->private_data = sysfs_new_dirent(parent_sd, NULL);
- mutex_unlock(&dentry->d_inode->i_mutex);
-
- return file->private_data ? 0 : -ENOMEM;
+ sd = sysfs_new_dirent("_DIR_", 0, 0);
+ if (sd) {
+ mutex_lock(&sysfs_mutex);
+ sd->s_parent = sysfs_get(parent_sd);
+ sysfs_link_sibling(sd);
+ mutex_unlock(&sysfs_mutex);
+ }
+ file->private_data = sd;
+ return sd ? 0 : -ENOMEM;
}
static int sysfs_dir_close(struct inode *inode, struct file *file)
{
- struct dentry * dentry = file->f_path.dentry;
struct sysfs_dirent * cursor = file->private_data;
- mutex_lock(&dentry->d_inode->i_mutex);
- list_del_init(&cursor->s_sibling);
- mutex_unlock(&dentry->d_inode->i_mutex);
+ mutex_lock(&sysfs_mutex);
+ sysfs_unlink_sibling(cursor);
+ mutex_unlock(&sysfs_mutex);
release_sysfs_dirent(cursor);
struct dentry *dentry = filp->f_path.dentry;
struct sysfs_dirent * parent_sd = dentry->d_fsdata;
struct sysfs_dirent *cursor = filp->private_data;
- struct list_head *p, *q = &cursor->s_sibling;
+ struct sysfs_dirent **pos;
ino_t ino;
int i = filp->f_pos;
i++;
/* fallthrough */
case 1:
- ino = parent_ino(dentry);
+ if (parent_sd->s_parent)
+ ino = parent_sd->s_parent->s_ino;
+ else
+ ino = parent_sd->s_ino;
if (filldir(dirent, "..", 2, i, ino, DT_DIR) < 0)
break;
filp->f_pos++;
i++;
/* fallthrough */
default:
+ mutex_lock(&sysfs_mutex);
+
+ pos = &parent_sd->s_children;
+ while (*pos != cursor)
+ pos = &(*pos)->s_sibling;
+
+ /* unlink cursor */
+ *pos = cursor->s_sibling;
+
if (filp->f_pos == 2)
- list_move(q, &parent_sd->s_children);
+ pos = &parent_sd->s_children;
- for (p=q->next; p!= &parent_sd->s_children; p=p->next) {
- struct sysfs_dirent *next;
+ for ( ; *pos; pos = &(*pos)->s_sibling) {
+ struct sysfs_dirent *next = *pos;
const char * name;
int len;
- next = list_entry(p, struct sysfs_dirent,
- s_sibling);
- if (!next->s_element)
+ if (!sysfs_type(next))
continue;
- name = sysfs_get_name(next);
+ name = next->s_name;
len = strlen(name);
ino = next->s_ino;
if (filldir(dirent, name, len, filp->f_pos, ino,
dt_type(next)) < 0)
- return 0;
+ break;
- list_move(q, p);
- p = q;
filp->f_pos++;
}
+
+ /* put cursor back in */
+ cursor->s_sibling = *pos;
+ *pos = cursor;
+
+ mutex_unlock(&sysfs_mutex);
}
return 0;
}
{
struct dentry * dentry = file->f_path.dentry;
- mutex_lock(&dentry->d_inode->i_mutex);
switch (origin) {
case 1:
offset += file->f_pos;
if (offset >= 0)
break;
default:
- mutex_unlock(&file->f_path.dentry->d_inode->i_mutex);
return -EINVAL;
}
if (offset != file->f_pos) {
+ mutex_lock(&sysfs_mutex);
+
file->f_pos = offset;
if (file->f_pos >= 2) {
struct sysfs_dirent *sd = dentry->d_fsdata;
struct sysfs_dirent *cursor = file->private_data;
- struct list_head *p;
+ struct sysfs_dirent **pos;
loff_t n = file->f_pos - 2;
- list_del(&cursor->s_sibling);
- p = sd->s_children.next;
- while (n && p != &sd->s_children) {
- struct sysfs_dirent *next;
- next = list_entry(p, struct sysfs_dirent,
- s_sibling);
- if (next->s_element)
+ sysfs_unlink_sibling(cursor);
+
+ pos = &sd->s_children;
+ while (n && *pos) {
+ struct sysfs_dirent *next = *pos;
+ if (sysfs_type(next))
n--;
- p = p->next;
+ pos = &(*pos)->s_sibling;
}
- list_add_tail(&cursor->s_sibling, p);
+
+ cursor->s_sibling = *pos;
+ *pos = cursor;
}
+
+ mutex_unlock(&sysfs_mutex);
}
- mutex_unlock(&dentry->d_inode->i_mutex);
+
return offset;
}
int sysfs_make_shadowed_dir(struct kobject *kobj,
void * (*follow_link)(struct dentry *, struct nameidata *))
{
+ struct dentry *dentry;
struct inode *inode;
struct inode_operations *i_op;
- inode = kobj->dentry->d_inode;
- if (inode->i_op != &sysfs_dir_inode_operations)
+ /* get dentry for @kobj->sd, dentry of a shadowed dir is pinned */
+ dentry = sysfs_get_dentry(kobj->sd);
+ if (IS_ERR(dentry))
+ return PTR_ERR(dentry);
+
+ inode = dentry->d_inode;
+ if (inode->i_op != &sysfs_dir_inode_operations) {
+ dput(dentry);
return -EINVAL;
+ }
i_op = kmalloc(sizeof(*i_op), GFP_KERNEL);
if (!i_op)
* directory.
*/
-struct dentry *sysfs_create_shadow_dir(struct kobject *kobj)
+struct sysfs_dirent *sysfs_create_shadow_dir(struct kobject *kobj)
{
- struct sysfs_dirent *sd;
- struct dentry *parent, *dir, *shadow;
+ struct sysfs_dirent *parent_sd = kobj->sd->s_parent;
+ struct dentry *dir, *parent, *shadow;
struct inode *inode;
+ struct sysfs_dirent *sd;
+ struct sysfs_addrm_cxt acxt;
- dir = kobj->dentry;
- inode = dir->d_inode;
+ dir = sysfs_get_dentry(kobj->sd);
+ if (IS_ERR(dir)) {
+ sd = (void *)dir;
+ goto out;
+ }
parent = dir->d_parent;
- shadow = ERR_PTR(-EINVAL);
+
+ inode = dir->d_inode;
+ sd = ERR_PTR(-EINVAL);
if (!sysfs_is_shadowed_inode(inode))
- goto out;
+ goto out_dput;
shadow = d_alloc(parent, &dir->d_name);
if (!shadow)
goto nomem;
- sd = __sysfs_make_dirent(shadow, kobj, inode->i_mode, SYSFS_DIR);
+ sd = sysfs_new_dirent("_SHADOW_", inode->i_mode, SYSFS_DIR);
if (!sd)
goto nomem;
+ sd->s_elem.dir.kobj = kobj;
+ sysfs_addrm_start(&acxt, parent_sd);
+
+ /* add but don't link into children list */
+ sysfs_add_one(&acxt, sd);
+
+ /* attach and instantiate dentry */
+ sysfs_attach_dentry(sd, shadow);
d_instantiate(shadow, igrab(inode));
- inc_nlink(inode);
- inc_nlink(parent->d_inode);
- shadow->d_op = &sysfs_dentry_ops;
+ inc_nlink(inode); /* tj: synchronization? */
+
+ sysfs_addrm_finish(&acxt);
dget(shadow); /* Extra count - pin the dentry in core */
-out:
- return shadow;
-nomem:
+ goto out_dput;
+
+ nomem:
dput(shadow);
- shadow = ERR_PTR(-ENOMEM);
- goto out;
+ sd = ERR_PTR(-ENOMEM);
+ out_dput:
+ dput(dir);
+ out:
+ return sd;
}
/**
* sysfs_remove_shadow_dir - remove an object's directory.
- * @shadow: dentry of shadow directory
+ * @shadow_sd: sysfs_dirent of shadow directory
*
* The only thing special about this is that we remove any files in
* the directory before we remove the directory, and we've inlined
* what used to be sysfs_rmdir() below, instead of calling separately.
*/
-void sysfs_remove_shadow_dir(struct dentry *shadow)
+void sysfs_remove_shadow_dir(struct sysfs_dirent *shadow_sd)
{
- __sysfs_remove_dir(shadow);
+ __sysfs_remove_dir(shadow_sd);
}
const struct file_operations sysfs_dir_operations = {
.store = subsys_attr_store,
};
-/**
- * add_to_collection - add buffer to a collection
- * @buffer: buffer to be added
- * @node: inode of set to add to
- */
-
-static inline void
-add_to_collection(struct sysfs_buffer *buffer, struct inode *node)
-{
- struct sysfs_buffer_collection *set = node->i_private;
-
- mutex_lock(&node->i_mutex);
- list_add(&buffer->associates, &set->associates);
- mutex_unlock(&node->i_mutex);
-}
-
-static inline void
-remove_from_collection(struct sysfs_buffer *buffer, struct inode *node)
-{
- mutex_lock(&node->i_mutex);
- list_del(&buffer->associates);
- mutex_unlock(&node->i_mutex);
-}
+struct sysfs_buffer {
+ size_t count;
+ loff_t pos;
+ char * page;
+ struct sysfs_ops * ops;
+ struct semaphore sem;
+ int needs_read_fill;
+ int event;
+};
/**
* fill_read_buffer - allocate and fill buffer from object.
*/
static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer)
{
- struct sysfs_dirent * sd = dentry->d_fsdata;
- struct attribute * attr = to_attr(dentry);
- struct kobject * kobj = to_kobj(dentry->d_parent);
+ struct sysfs_dirent *attr_sd = dentry->d_fsdata;
+ struct kobject *kobj = attr_sd->s_parent->s_elem.dir.kobj;
struct sysfs_ops * ops = buffer->ops;
int ret = 0;
ssize_t count;
if (!buffer->page)
return -ENOMEM;
- buffer->event = atomic_read(&sd->s_event);
- count = ops->show(kobj,attr,buffer->page);
+ /* need attr_sd for attr and ops, its parent for kobj */
+ if (!sysfs_get_active_two(attr_sd))
+ return -ENODEV;
+
+ buffer->event = atomic_read(&attr_sd->s_event);
+ count = ops->show(kobj, attr_sd->s_elem.attr.attr, buffer->page);
+
+ sysfs_put_active_two(attr_sd);
+
BUG_ON(count > (ssize_t)PAGE_SIZE);
if (count >= 0) {
buffer->needs_read_fill = 0;
down(&buffer->sem);
if (buffer->needs_read_fill) {
- if (buffer->orphaned)
- retval = -ENODEV;
- else
- retval = fill_read_buffer(file->f_path.dentry,buffer);
+ retval = fill_read_buffer(file->f_path.dentry,buffer);
if (retval)
goto out;
}
* passing the buffer that we acquired in fill_write_buffer().
*/
-static int
+static int
flush_write_buffer(struct dentry * dentry, struct sysfs_buffer * buffer, size_t count)
{
- struct attribute * attr = to_attr(dentry);
- struct kobject * kobj = to_kobj(dentry->d_parent);
+ struct sysfs_dirent *attr_sd = dentry->d_fsdata;
+ struct kobject *kobj = attr_sd->s_parent->s_elem.dir.kobj;
struct sysfs_ops * ops = buffer->ops;
+ int rc;
+
+ /* need attr_sd for attr and ops, its parent for kobj */
+ if (!sysfs_get_active_two(attr_sd))
+ return -ENODEV;
+
+ rc = ops->store(kobj, attr_sd->s_elem.attr.attr, buffer->page, count);
- return ops->store(kobj,attr,buffer->page,count);
+ sysfs_put_active_two(attr_sd);
+
+ return rc;
}
ssize_t len;
down(&buffer->sem);
- if (buffer->orphaned) {
- len = -ENODEV;
- goto out;
- }
len = fill_write_buffer(buffer, buf, count);
if (len > 0)
len = flush_write_buffer(file->f_path.dentry, buffer, len);
if (len > 0)
*ppos += len;
-out:
up(&buffer->sem);
return len;
}
static int sysfs_open_file(struct inode *inode, struct file *file)
{
- struct kobject *kobj = sysfs_get_kobject(file->f_path.dentry->d_parent);
- struct attribute * attr = to_attr(file->f_path.dentry);
- struct sysfs_buffer_collection *set;
+ struct sysfs_dirent *attr_sd = file->f_path.dentry->d_fsdata;
+ struct kobject *kobj = attr_sd->s_parent->s_elem.dir.kobj;
struct sysfs_buffer * buffer;
struct sysfs_ops * ops = NULL;
- int error = 0;
-
- if (!kobj || !attr)
- goto Einval;
+ int error;
- /* Grab the module reference for this attribute if we have one */
- if (!try_module_get(attr->owner)) {
- error = -ENODEV;
- goto Done;
- }
+ /* need attr_sd for attr and ops, its parent for kobj */
+ if (!sysfs_get_active_two(attr_sd))
+ return -ENODEV;
/* if the kobject has no ktype, then we assume that it is a subsystem
* itself, and use ops for it.
else
ops = &subsys_sysfs_ops;
+ error = -EACCES;
+
/* No sysfs operations, either from having no subsystem,
* or the subsystem have no operations.
*/
if (!ops)
- goto Eaccess;
-
- /* make sure we have a collection to add our buffers to */
- mutex_lock(&inode->i_mutex);
- if (!(set = inode->i_private)) {
- if (!(set = inode->i_private = kmalloc(sizeof(struct sysfs_buffer_collection), GFP_KERNEL))) {
- error = -ENOMEM;
- goto Done;
- } else {
- INIT_LIST_HEAD(&set->associates);
- }
- }
- mutex_unlock(&inode->i_mutex);
+ goto err_out;
/* File needs write support.
* The inode's perms must say it's ok,
* and we must have a store method.
*/
if (file->f_mode & FMODE_WRITE) {
-
if (!(inode->i_mode & S_IWUGO) || !ops->store)
- goto Eaccess;
-
+ goto err_out;
}
/* File needs read support.
*/
if (file->f_mode & FMODE_READ) {
if (!(inode->i_mode & S_IRUGO) || !ops->show)
- goto Eaccess;
+ goto err_out;
}
/* No error? Great, allocate a buffer for the file, and store it
* it in file->private_data for easy access.
*/
+ error = -ENOMEM;
buffer = kzalloc(sizeof(struct sysfs_buffer), GFP_KERNEL);
- if (buffer) {
- INIT_LIST_HEAD(&buffer->associates);
- init_MUTEX(&buffer->sem);
- buffer->needs_read_fill = 1;
- buffer->ops = ops;
- add_to_collection(buffer, inode);
- file->private_data = buffer;
- } else
- error = -ENOMEM;
- goto Done;
-
- Einval:
- error = -EINVAL;
- goto Done;
- Eaccess:
- error = -EACCES;
- module_put(attr->owner);
- Done:
- if (error)
- kobject_put(kobj);
+ if (!buffer)
+ goto err_out;
+
+ init_MUTEX(&buffer->sem);
+ buffer->needs_read_fill = 1;
+ buffer->ops = ops;
+ file->private_data = buffer;
+
+ /* open succeeded, put active references and pin attr_sd */
+ sysfs_put_active_two(attr_sd);
+ sysfs_get(attr_sd);
+ return 0;
+
+ err_out:
+ sysfs_put_active_two(attr_sd);
return error;
}
static int sysfs_release(struct inode * inode, struct file * filp)
{
- struct kobject * kobj = to_kobj(filp->f_path.dentry->d_parent);
- struct attribute * attr = to_attr(filp->f_path.dentry);
- struct module * owner = attr->owner;
- struct sysfs_buffer * buffer = filp->private_data;
+ struct sysfs_dirent *attr_sd = filp->f_path.dentry->d_fsdata;
+ struct sysfs_buffer *buffer = filp->private_data;
- if (buffer)
- remove_from_collection(buffer, inode);
- kobject_put(kobj);
- /* After this point, attr should not be accessed. */
- module_put(owner);
+ sysfs_put(attr_sd);
if (buffer) {
if (buffer->page)
static unsigned int sysfs_poll(struct file *filp, poll_table *wait)
{
struct sysfs_buffer * buffer = filp->private_data;
- struct kobject * kobj = to_kobj(filp->f_path.dentry->d_parent);
- struct sysfs_dirent * sd = filp->f_path.dentry->d_fsdata;
- int res = 0;
+ struct sysfs_dirent *attr_sd = filp->f_path.dentry->d_fsdata;
+ struct kobject *kobj = attr_sd->s_parent->s_elem.dir.kobj;
+
+ /* need parent for the kobj, grab both */
+ if (!sysfs_get_active_two(attr_sd))
+ goto trigger;
poll_wait(filp, &kobj->poll, wait);
- if (buffer->event != atomic_read(&sd->s_event)) {
- res = POLLERR|POLLPRI;
- buffer->needs_read_fill = 1;
- }
+ sysfs_put_active_two(attr_sd);
- return res;
-}
+ if (buffer->event != atomic_read(&attr_sd->s_event))
+ goto trigger;
+ return 0;
-static struct dentry *step_down(struct dentry *dir, const char * name)
-{
- struct dentry * de;
-
- if (dir == NULL || dir->d_inode == NULL)
- return NULL;
-
- mutex_lock(&dir->d_inode->i_mutex);
- de = lookup_one_len(name, dir, strlen(name));
- mutex_unlock(&dir->d_inode->i_mutex);
- dput(dir);
- if (IS_ERR(de))
- return NULL;
- if (de->d_inode == NULL) {
- dput(de);
- return NULL;
- }
- return de;
+ trigger:
+ buffer->needs_read_fill = 1;
+ return POLLERR|POLLPRI;
}
-void sysfs_notify(struct kobject * k, char *dir, char *attr)
+void sysfs_notify(struct kobject *k, char *dir, char *attr)
{
- struct dentry *de = k->dentry;
- if (de)
- dget(de);
- if (de && dir)
- de = step_down(de, dir);
- if (de && attr)
- de = step_down(de, attr);
- if (de) {
- struct sysfs_dirent * sd = de->d_fsdata;
- if (sd)
- atomic_inc(&sd->s_event);
+ struct sysfs_dirent *sd = k->sd;
+
+ mutex_lock(&sysfs_mutex);
+
+ if (sd && dir)
+ sd = sysfs_find_dirent(sd, dir);
+ if (sd && attr)
+ sd = sysfs_find_dirent(sd, attr);
+ if (sd) {
+ atomic_inc(&sd->s_event);
wake_up_interruptible(&k->poll);
- dput(de);
}
+
+ mutex_unlock(&sysfs_mutex);
}
EXPORT_SYMBOL_GPL(sysfs_notify);
};
-int sysfs_add_file(struct dentry * dir, const struct attribute * attr, int type)
+int sysfs_add_file(struct sysfs_dirent *dir_sd, const struct attribute *attr,
+ int type)
{
- struct sysfs_dirent * parent_sd = dir->d_fsdata;
umode_t mode = (attr->mode & S_IALLUGO) | S_IFREG;
- int error = -EEXIST;
+ struct sysfs_addrm_cxt acxt;
+ struct sysfs_dirent *sd;
- mutex_lock(&dir->d_inode->i_mutex);
- if (!sysfs_dirent_exist(parent_sd, attr->name))
- error = sysfs_make_dirent(parent_sd, NULL, (void *)attr,
- mode, type);
- mutex_unlock(&dir->d_inode->i_mutex);
+ sd = sysfs_new_dirent(attr->name, mode, type);
+ if (!sd)
+ return -ENOMEM;
+ sd->s_elem.attr.attr = (void *)attr;
- return error;
+ sysfs_addrm_start(&acxt, dir_sd);
+
+ if (!sysfs_find_dirent(dir_sd, attr->name)) {
+ sysfs_add_one(&acxt, sd);
+ sysfs_link_sibling(sd);
+ }
+
+ if (sysfs_addrm_finish(&acxt))
+ return 0;
+
+ sysfs_put(sd);
+ return -EEXIST;
}
int sysfs_create_file(struct kobject * kobj, const struct attribute * attr)
{
- BUG_ON(!kobj || !kobj->dentry || !attr);
+ BUG_ON(!kobj || !kobj->sd || !attr);
- return sysfs_add_file(kobj->dentry, attr, SYSFS_KOBJ_ATTR);
+ return sysfs_add_file(kobj->sd, attr, SYSFS_KOBJ_ATTR);
}
int sysfs_add_file_to_group(struct kobject *kobj,
const struct attribute *attr, const char *group)
{
- struct dentry *dir;
+ struct sysfs_dirent *dir_sd;
int error;
- dir = lookup_one_len(group, kobj->dentry, strlen(group));
- if (IS_ERR(dir))
- error = PTR_ERR(dir);
- else {
- error = sysfs_add_file(dir, attr, SYSFS_KOBJ_ATTR);
- dput(dir);
- }
+ dir_sd = sysfs_get_dirent(kobj->sd, group);
+ if (!dir_sd)
+ return -ENOENT;
+
+ error = sysfs_add_file(dir_sd, attr, SYSFS_KOBJ_ATTR);
+ sysfs_put(dir_sd);
+
return error;
}
EXPORT_SYMBOL_GPL(sysfs_add_file_to_group);
*/
int sysfs_update_file(struct kobject * kobj, const struct attribute * attr)
{
- struct dentry * dir = kobj->dentry;
- struct dentry * victim;
- int res = -ENOENT;
-
- mutex_lock(&dir->d_inode->i_mutex);
- victim = lookup_one_len(attr->name, dir, strlen(attr->name));
- if (!IS_ERR(victim)) {
- /* make sure dentry is really there */
- if (victim->d_inode &&
- (victim->d_parent->d_inode == dir->d_inode)) {
- victim->d_inode->i_mtime = CURRENT_TIME;
- fsnotify_modify(victim);
- res = 0;
- } else
- d_drop(victim);
-
- /**
- * Drop the reference acquired from lookup_one_len() above.
- */
- dput(victim);
+ struct sysfs_dirent *victim_sd = NULL;
+ struct dentry *victim = NULL;
+ int rc;
+
+ rc = -ENOENT;
+ victim_sd = sysfs_get_dirent(kobj->sd, attr->name);
+ if (!victim_sd)
+ goto out;
+
+ victim = sysfs_get_dentry(victim_sd);
+ if (IS_ERR(victim)) {
+ rc = PTR_ERR(victim);
+ victim = NULL;
+ goto out;
}
- mutex_unlock(&dir->d_inode->i_mutex);
- return res;
+ mutex_lock(&victim->d_inode->i_mutex);
+ victim->d_inode->i_mtime = CURRENT_TIME;
+ fsnotify_modify(victim);
+ mutex_unlock(&victim->d_inode->i_mutex);
+ rc = 0;
+ out:
+ dput(victim);
+ sysfs_put(victim_sd);
+ return rc;
}
*/
int sysfs_chmod_file(struct kobject *kobj, struct attribute *attr, mode_t mode)
{
- struct dentry *dir = kobj->dentry;
- struct dentry *victim;
+ struct sysfs_dirent *victim_sd = NULL;
+ struct dentry *victim = NULL;
struct inode * inode;
struct iattr newattrs;
- int res = -ENOENT;
-
- mutex_lock(&dir->d_inode->i_mutex);
- victim = lookup_one_len(attr->name, dir, strlen(attr->name));
- if (!IS_ERR(victim)) {
- if (victim->d_inode &&
- (victim->d_parent->d_inode == dir->d_inode)) {
- inode = victim->d_inode;
- mutex_lock(&inode->i_mutex);
- newattrs.ia_mode = (mode & S_IALLUGO) |
- (inode->i_mode & ~S_IALLUGO);
- newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
- res = notify_change(victim, &newattrs);
- mutex_unlock(&inode->i_mutex);
- }
- dput(victim);
+ int rc;
+
+ rc = -ENOENT;
+ victim_sd = sysfs_get_dirent(kobj->sd, attr->name);
+ if (!victim_sd)
+ goto out;
+
+ victim = sysfs_get_dentry(victim_sd);
+ if (IS_ERR(victim)) {
+ rc = PTR_ERR(victim);
+ victim = NULL;
+ goto out;
}
- mutex_unlock(&dir->d_inode->i_mutex);
- return res;
+ inode = victim->d_inode;
+ mutex_lock(&inode->i_mutex);
+ newattrs.ia_mode = (mode & S_IALLUGO) | (inode->i_mode & ~S_IALLUGO);
+ newattrs.ia_valid = ATTR_MODE | ATTR_CTIME;
+ rc = notify_change(victim, &newattrs);
+ mutex_unlock(&inode->i_mutex);
+ out:
+ dput(victim);
+ sysfs_put(victim_sd);
+ return rc;
}
EXPORT_SYMBOL_GPL(sysfs_chmod_file);
void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr)
{
- sysfs_hash_and_remove(kobj->dentry, attr->name);
+ sysfs_hash_and_remove(kobj->sd, attr->name);
}
void sysfs_remove_file_from_group(struct kobject *kobj,
const struct attribute *attr, const char *group)
{
- struct dentry *dir;
+ struct sysfs_dirent *dir_sd;
- dir = lookup_one_len(group, kobj->dentry, strlen(group));
- if (!IS_ERR(dir)) {
- sysfs_hash_and_remove(dir, attr->name);
- dput(dir);
+ dir_sd = sysfs_get_dirent(kobj->sd, group);
+ if (dir_sd) {
+ sysfs_hash_and_remove(dir_sd, attr->name);
+ sysfs_put(dir_sd);
}
}
EXPORT_SYMBOL_GPL(sysfs_remove_file_from_group);
#include "sysfs.h"
-static void remove_files(struct dentry * dir,
- const struct attribute_group * grp)
+static void remove_files(struct sysfs_dirent *dir_sd,
+ const struct attribute_group *grp)
{
struct attribute *const* attr;
for (attr = grp->attrs; *attr; attr++)
- sysfs_hash_and_remove(dir,(*attr)->name);
+ sysfs_hash_and_remove(dir_sd, (*attr)->name);
}
-static int create_files(struct dentry * dir,
- const struct attribute_group * grp)
+static int create_files(struct sysfs_dirent *dir_sd,
+ const struct attribute_group *grp)
{
struct attribute *const* attr;
int error = 0;
- for (attr = grp->attrs; *attr && !error; attr++) {
- error = sysfs_add_file(dir, *attr, SYSFS_KOBJ_ATTR);
- }
+ for (attr = grp->attrs; *attr && !error; attr++)
+ error = sysfs_add_file(dir_sd, *attr, SYSFS_KOBJ_ATTR);
if (error)
- remove_files(dir,grp);
+ remove_files(dir_sd, grp);
return error;
}
int sysfs_create_group(struct kobject * kobj,
const struct attribute_group * grp)
{
- struct dentry * dir;
+ struct sysfs_dirent *sd;
int error;
- BUG_ON(!kobj || !kobj->dentry);
+ BUG_ON(!kobj || !kobj->sd);
if (grp->name) {
- error = sysfs_create_subdir(kobj,grp->name,&dir);
+ error = sysfs_create_subdir(kobj, grp->name, &sd);
if (error)
return error;
} else
- dir = kobj->dentry;
- dir = dget(dir);
- if ((error = create_files(dir,grp))) {
+ sd = kobj->sd;
+ sysfs_get(sd);
+ error = create_files(sd, grp);
+ if (error) {
if (grp->name)
- sysfs_remove_subdir(dir);
+ sysfs_remove_subdir(sd);
}
- dput(dir);
+ sysfs_put(sd);
return error;
}
void sysfs_remove_group(struct kobject * kobj,
const struct attribute_group * grp)
{
- struct dentry * dir;
+ struct sysfs_dirent *dir_sd = kobj->sd;
+ struct sysfs_dirent *sd;
if (grp->name) {
- dir = lookup_one_len_kern(grp->name, kobj->dentry,
- strlen(grp->name));
- BUG_ON(IS_ERR(dir));
- }
- else
- dir = dget(kobj->dentry);
+ sd = sysfs_get_dirent(dir_sd, grp->name);
+ BUG_ON(!sd);
+ } else
+ sd = sysfs_get(dir_sd);
- remove_files(dir,grp);
+ remove_files(sd, grp);
if (grp->name)
- sysfs_remove_subdir(dir);
- /* release the ref. taken in this routine */
- dput(dir);
+ sysfs_remove_subdir(sd);
+
+ sysfs_put(sd);
}
*/
static struct lock_class_key sysfs_inode_imutex_key;
-struct inode * sysfs_new_inode(mode_t mode, struct sysfs_dirent * sd)
+void sysfs_init_inode(struct sysfs_dirent *sd, struct inode *inode)
{
- struct inode * inode = new_inode(sysfs_sb);
- if (inode) {
- inode->i_blocks = 0;
- inode->i_mapping->a_ops = &sysfs_aops;
- inode->i_mapping->backing_dev_info = &sysfs_backing_dev_info;
- inode->i_op = &sysfs_inode_operations;
- inode->i_ino = sd->s_ino;
- lockdep_set_class(&inode->i_mutex, &sysfs_inode_imutex_key);
-
- if (sd->s_iattr) {
- /* sysfs_dirent has non-default attributes
- * get them for the new inode from persistent copy
- * in sysfs_dirent
- */
- set_inode_attr(inode, sd->s_iattr);
- } else
- set_default_inode_attr(inode, mode);
- }
- return inode;
-}
-
-int sysfs_create(struct dentry * dentry, int mode, int (*init)(struct inode *))
-{
- int error = 0;
- struct inode * inode = NULL;
- if (dentry) {
- if (!dentry->d_inode) {
- struct sysfs_dirent * sd = dentry->d_fsdata;
- if ((inode = sysfs_new_inode(mode, sd))) {
- if (dentry->d_parent && dentry->d_parent->d_inode) {
- struct inode *p_inode = dentry->d_parent->d_inode;
- p_inode->i_mtime = p_inode->i_ctime = CURRENT_TIME;
- }
- goto Proceed;
- }
- else
- error = -ENOMEM;
- } else
- error = -EEXIST;
- } else
- error = -ENOENT;
- goto Done;
-
- Proceed:
- if (init)
- error = init(inode);
- if (!error) {
- d_instantiate(dentry, inode);
- if (S_ISDIR(mode))
- dget(dentry); /* pin only directory dentry in core */
+ inode->i_blocks = 0;
+ inode->i_mapping->a_ops = &sysfs_aops;
+ inode->i_mapping->backing_dev_info = &sysfs_backing_dev_info;
+ inode->i_op = &sysfs_inode_operations;
+ inode->i_ino = sd->s_ino;
+ lockdep_set_class(&inode->i_mutex, &sysfs_inode_imutex_key);
+
+ if (sd->s_iattr) {
+ /* sysfs_dirent has non-default attributes
+ * get them for the new inode from persistent copy
+ * in sysfs_dirent
+ */
+ set_inode_attr(inode, sd->s_iattr);
} else
- iput(inode);
- Done:
- return error;
+ set_default_inode_attr(inode, sd->s_mode);
}
-/*
- * Get the name for corresponding element represented by the given sysfs_dirent
+/**
+ * sysfs_get_inode - get inode for sysfs_dirent
+ * @sd: sysfs_dirent to allocate inode for
+ *
+ * Get inode for @sd. If such inode doesn't exist, a new inode
+ * is allocated and basics are initialized. New inode is
+ * returned locked.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * Pointer to allocated inode on success, NULL on failure.
*/
-const unsigned char * sysfs_get_name(struct sysfs_dirent *sd)
+struct inode * sysfs_get_inode(struct sysfs_dirent *sd)
{
- struct attribute * attr;
- struct bin_attribute * bin_attr;
- struct sysfs_symlink * sl;
-
- BUG_ON(!sd || !sd->s_element);
-
- switch (sd->s_type) {
- case SYSFS_DIR:
- /* Always have a dentry so use that */
- return sd->s_dentry->d_name.name;
-
- case SYSFS_KOBJ_ATTR:
- attr = sd->s_element;
- return attr->name;
-
- case SYSFS_KOBJ_BIN_ATTR:
- bin_attr = sd->s_element;
- return bin_attr->attr.name;
+ struct inode *inode;
- case SYSFS_KOBJ_LINK:
- sl = sd->s_element;
- return sl->link_name;
- }
- return NULL;
-}
+ inode = iget_locked(sysfs_sb, sd->s_ino);
+ if (inode && (inode->i_state & I_NEW))
+ sysfs_init_inode(sd, inode);
-static inline void orphan_all_buffers(struct inode *node)
-{
- struct sysfs_buffer_collection *set;
- struct sysfs_buffer *buf;
-
- mutex_lock_nested(&node->i_mutex, I_MUTEX_CHILD);
- set = node->i_private;
- if (set) {
- list_for_each_entry(buf, &set->associates, associates) {
- down(&buf->sem);
- buf->orphaned = 1;
- up(&buf->sem);
- }
- }
- mutex_unlock(&node->i_mutex);
+ return inode;
}
-
-/*
- * Unhashes the dentry corresponding to given sysfs_dirent
- * Called with parent inode's i_mutex held.
+/**
+ * sysfs_instantiate - instantiate dentry
+ * @dentry: dentry to be instantiated
+ * @inode: inode associated with @sd
+ *
+ * Unlock @inode if locked and instantiate @dentry with @inode.
+ *
+ * LOCKING:
+ * None.
*/
-void sysfs_drop_dentry(struct sysfs_dirent * sd, struct dentry * parent)
+void sysfs_instantiate(struct dentry *dentry, struct inode *inode)
{
- struct dentry *dentry = NULL;
- struct inode *inode;
+ BUG_ON(!dentry || dentry->d_inode);
- /* We're not holding a reference to ->s_dentry dentry but the
- * field will stay valid as long as sysfs_lock is held.
- */
- spin_lock(&sysfs_lock);
- spin_lock(&dcache_lock);
-
- /* dget dentry if it's still alive */
- if (sd->s_dentry && sd->s_dentry->d_inode)
- dentry = dget_locked(sd->s_dentry);
-
- spin_unlock(&dcache_lock);
- spin_unlock(&sysfs_lock);
-
- /* drop dentry */
- if (dentry) {
- spin_lock(&dcache_lock);
- spin_lock(&dentry->d_lock);
- if (!d_unhashed(dentry) && dentry->d_inode) {
- inode = dentry->d_inode;
- spin_lock(&inode->i_lock);
- __iget(inode);
- spin_unlock(&inode->i_lock);
- dget_locked(dentry);
- __d_drop(dentry);
- spin_unlock(&dentry->d_lock);
- spin_unlock(&dcache_lock);
- simple_unlink(parent->d_inode, dentry);
- orphan_all_buffers(inode);
- iput(inode);
- } else {
- spin_unlock(&dentry->d_lock);
- spin_unlock(&dcache_lock);
- }
+ if (inode->i_state & I_NEW)
+ unlock_new_inode(inode);
- dput(dentry);
- }
+ d_instantiate(dentry, inode);
}
-int sysfs_hash_and_remove(struct dentry * dir, const char * name)
+int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const char *name)
{
- struct sysfs_dirent * sd;
- struct sysfs_dirent * parent_sd;
- int found = 0;
+ struct sysfs_addrm_cxt acxt;
+ struct sysfs_dirent **pos, *sd;
- if (!dir)
+ if (!dir_sd)
return -ENOENT;
- if (dir->d_inode == NULL)
- /* no inode means this hasn't been made visible yet */
- return -ENOENT;
+ sysfs_addrm_start(&acxt, dir_sd);
+
+ for (pos = &dir_sd->s_children; *pos; pos = &(*pos)->s_sibling) {
+ sd = *pos;
- parent_sd = dir->d_fsdata;
- mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
- list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
- if (!sd->s_element)
+ if (!sysfs_type(sd))
continue;
- if (!strcmp(sysfs_get_name(sd), name)) {
- list_del_init(&sd->s_sibling);
- sysfs_drop_dentry(sd, dir);
- sysfs_put(sd);
- found = 1;
+ if (!strcmp(sd->s_name, name)) {
+ *pos = sd->s_sibling;
+ sd->s_sibling = NULL;
+ sysfs_remove_one(&acxt, sd);
break;
}
}
- mutex_unlock(&dir->d_inode->i_mutex);
- return found ? 0 : -ENOENT;
+ if (sysfs_addrm_finish(&acxt))
+ return 0;
+ return -ENOENT;
}
struct super_block * sysfs_sb = NULL;
struct kmem_cache *sysfs_dir_cachep;
-static void sysfs_clear_inode(struct inode *inode);
-
static const struct super_operations sysfs_ops = {
.statfs = simple_statfs,
.drop_inode = sysfs_delete_inode,
- .clear_inode = sysfs_clear_inode,
};
-static struct sysfs_dirent sysfs_root = {
- .s_sibling = LIST_HEAD_INIT(sysfs_root.s_sibling),
- .s_children = LIST_HEAD_INIT(sysfs_root.s_children),
- .s_element = NULL,
- .s_type = SYSFS_ROOT,
- .s_iattr = NULL,
+struct sysfs_dirent sysfs_root = {
+ .s_count = ATOMIC_INIT(1),
+ .s_flags = SYSFS_ROOT,
+ .s_mode = S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO,
.s_ino = 1,
};
-static void sysfs_clear_inode(struct inode *inode)
-{
- kfree(inode->i_private);
-}
-
static int sysfs_fill_super(struct super_block *sb, void *data, int silent)
{
struct inode *inode;
sb->s_time_gran = 1;
sysfs_sb = sb;
- inode = sysfs_new_inode(S_IFDIR | S_IRWXU | S_IRUGO | S_IXUGO,
- &sysfs_root);
- if (inode) {
- inode->i_op = &sysfs_dir_inode_operations;
- inode->i_fop = &sysfs_dir_operations;
- /* directory inodes start off with i_nlink == 2 (for "." entry) */
- inc_nlink(inode);
- } else {
+ inode = new_inode(sysfs_sb);
+ if (!inode) {
pr_debug("sysfs: could not get root inode\n");
return -ENOMEM;
}
+ sysfs_init_inode(&sysfs_root, inode);
+
+ inode->i_op = &sysfs_dir_inode_operations;
+ inode->i_fop = &sysfs_dir_operations;
+ /* directory inodes start off with i_nlink == 2 (for "." entry) */
+ inc_nlink(inode);
+
root = d_alloc_root(inode);
if (!root) {
pr_debug("%s: could not get root dentry!\n",__FUNCTION__);
iput(inode);
return -ENOMEM;
}
+ sysfs_root.s_dentry = root;
root->d_fsdata = &sysfs_root;
sb->s_root = root;
return 0;
#include "sysfs.h"
-static int object_depth(struct kobject * kobj)
+static int object_depth(struct sysfs_dirent *sd)
{
- struct kobject * p = kobj;
int depth = 0;
- do { depth++; } while ((p = p->parent));
+
+ for (; sd->s_parent; sd = sd->s_parent)
+ depth++;
+
return depth;
}
-static int object_path_length(struct kobject * kobj)
+static int object_path_length(struct sysfs_dirent * sd)
{
- struct kobject * p = kobj;
int length = 1;
- do {
- length += strlen(kobject_name(p)) + 1;
- p = p->parent;
- } while (p);
+
+ for (; sd->s_parent; sd = sd->s_parent)
+ length += strlen(sd->s_name) + 1;
+
return length;
}
-static void fill_object_path(struct kobject * kobj, char * buffer, int length)
+static void fill_object_path(struct sysfs_dirent *sd, char *buffer, int length)
{
- struct kobject * p;
-
--length;
- for (p = kobj; p; p = p->parent) {
- int cur = strlen(kobject_name(p));
+ for (; sd->s_parent; sd = sd->s_parent) {
+ int cur = strlen(sd->s_name);
/* back up enough to print this bus id with '/' */
length -= cur;
- strncpy(buffer + length,kobject_name(p),cur);
+ strncpy(buffer + length, sd->s_name, cur);
*(buffer + --length) = '/';
}
}
-static int sysfs_add_link(struct dentry * parent, const char * name, struct kobject * target)
-{
- struct sysfs_dirent * parent_sd = parent->d_fsdata;
- struct sysfs_symlink * sl;
- int error = 0;
-
- error = -ENOMEM;
- sl = kmalloc(sizeof(*sl), GFP_KERNEL);
- if (!sl)
- goto exit1;
-
- sl->link_name = kmalloc(strlen(name) + 1, GFP_KERNEL);
- if (!sl->link_name)
- goto exit2;
-
- strcpy(sl->link_name, name);
- sl->target_kobj = kobject_get(target);
-
- error = sysfs_make_dirent(parent_sd, NULL, sl, S_IFLNK|S_IRWXUGO,
- SYSFS_KOBJ_LINK);
- if (!error)
- return 0;
-
- kobject_put(target);
- kfree(sl->link_name);
-exit2:
- kfree(sl);
-exit1:
- return error;
-}
-
/**
* sysfs_create_link - create symlink between two objects.
* @kobj: object whose directory we're creating the link in.
*/
int sysfs_create_link(struct kobject * kobj, struct kobject * target, const char * name)
{
- struct dentry *dentry = NULL;
- int error = -EEXIST;
+ struct sysfs_dirent *parent_sd = NULL;
+ struct sysfs_dirent *target_sd = NULL;
+ struct sysfs_dirent *sd = NULL;
+ struct sysfs_addrm_cxt acxt;
+ int error;
BUG_ON(!name);
if (!kobj) {
if (sysfs_mount && sysfs_mount->mnt_sb)
- dentry = sysfs_mount->mnt_sb->s_root;
+ parent_sd = sysfs_mount->mnt_sb->s_root->d_fsdata;
} else
- dentry = kobj->dentry;
+ parent_sd = kobj->sd;
+
+ error = -EFAULT;
+ if (!parent_sd)
+ goto out_put;
+
+ /* target->sd can go away beneath us but is protected with
+ * sysfs_assoc_lock. Fetch target_sd from it.
+ */
+ spin_lock(&sysfs_assoc_lock);
+ if (target->sd)
+ target_sd = sysfs_get(target->sd);
+ spin_unlock(&sysfs_assoc_lock);
+
+ error = -ENOENT;
+ if (!target_sd)
+ goto out_put;
+
+ error = -ENOMEM;
+ sd = sysfs_new_dirent(name, S_IFLNK|S_IRWXUGO, SYSFS_KOBJ_LINK);
+ if (!sd)
+ goto out_put;
+ sd->s_elem.symlink.target_sd = target_sd;
- if (!dentry)
- return -EFAULT;
+ sysfs_addrm_start(&acxt, parent_sd);
- mutex_lock(&dentry->d_inode->i_mutex);
- if (!sysfs_dirent_exist(dentry->d_fsdata, name))
- error = sysfs_add_link(dentry, name, target);
- mutex_unlock(&dentry->d_inode->i_mutex);
+ if (!sysfs_find_dirent(parent_sd, name)) {
+ sysfs_add_one(&acxt, sd);
+ sysfs_link_sibling(sd);
+ }
+
+ if (sysfs_addrm_finish(&acxt))
+ return 0;
+
+ error = -EEXIST;
+ /* fall through */
+ out_put:
+ sysfs_put(target_sd);
+ sysfs_put(sd);
return error;
}
void sysfs_remove_link(struct kobject * kobj, const char * name)
{
- sysfs_hash_and_remove(kobj->dentry,name);
+ sysfs_hash_and_remove(kobj->sd, name);
}
-static int sysfs_get_target_path(struct kobject * kobj, struct kobject * target,
- char *path)
+static int sysfs_get_target_path(struct sysfs_dirent * parent_sd,
+ struct sysfs_dirent * target_sd, char *path)
{
char * s;
int depth, size;
- depth = object_depth(kobj);
- size = object_path_length(target) + depth * 3 - 1;
+ depth = object_depth(parent_sd);
+ size = object_path_length(target_sd) + depth * 3 - 1;
if (size > PATH_MAX)
return -ENAMETOOLONG;
for (s = path; depth--; s += 3)
strcpy(s,"../");
- fill_object_path(target, path, size);
+ fill_object_path(target_sd, path, size);
pr_debug("%s: path = '%s'\n", __FUNCTION__, path);
return 0;
static int sysfs_getlink(struct dentry *dentry, char * path)
{
- struct kobject *kobj, *target_kobj;
- int error = 0;
+ struct sysfs_dirent *sd = dentry->d_fsdata;
+ struct sysfs_dirent *parent_sd = sd->s_parent;
+ struct sysfs_dirent *target_sd = sd->s_elem.symlink.target_sd;
+ int error;
- kobj = sysfs_get_kobject(dentry->d_parent);
- if (!kobj)
- return -EINVAL;
+ mutex_lock(&sysfs_mutex);
+ error = sysfs_get_target_path(parent_sd, target_sd, path);
+ mutex_unlock(&sysfs_mutex);
- target_kobj = sysfs_get_kobject(dentry);
- if (!target_kobj) {
- kobject_put(kobj);
- return -EINVAL;
- }
-
- down_read(&sysfs_rename_sem);
- error = sysfs_get_target_path(kobj, target_kobj, path);
- up_read(&sysfs_rename_sem);
-
- kobject_put(kobj);
- kobject_put(target_kobj);
return error;
-
}
static void *sysfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+struct sysfs_elem_dir {
+ struct kobject * kobj;
+};
+
+struct sysfs_elem_symlink {
+ struct sysfs_dirent * target_sd;
+};
+
+struct sysfs_elem_attr {
+ struct attribute * attr;
+};
+
+struct sysfs_elem_bin_attr {
+ struct bin_attribute * bin_attr;
+};
+
+/*
+ * As long as s_count reference is held, the sysfs_dirent itself is
+ * accessible. Dereferencing s_elem or any other outer entity
+ * requires s_active reference.
+ */
struct sysfs_dirent {
atomic_t s_count;
- struct list_head s_sibling;
- struct list_head s_children;
- void * s_element;
- int s_type;
+ atomic_t s_active;
+ struct sysfs_dirent * s_parent;
+ struct sysfs_dirent * s_sibling;
+ struct sysfs_dirent * s_children;
+ const char * s_name;
+
+ union {
+ struct sysfs_elem_dir dir;
+ struct sysfs_elem_symlink symlink;
+ struct sysfs_elem_attr attr;
+ struct sysfs_elem_bin_attr bin_attr;
+ } s_elem;
+
+ unsigned int s_flags;
umode_t s_mode;
ino_t s_ino;
struct dentry * s_dentry;
atomic_t s_event;
};
+#define SD_DEACTIVATED_BIAS INT_MIN
+
+struct sysfs_addrm_cxt {
+ struct sysfs_dirent *parent_sd;
+ struct inode *parent_inode;
+ struct sysfs_dirent *removed;
+ int cnt;
+};
+
extern struct vfsmount * sysfs_mount;
+extern struct sysfs_dirent sysfs_root;
extern struct kmem_cache *sysfs_dir_cachep;
-extern void sysfs_delete_inode(struct inode *inode);
-extern struct inode * sysfs_new_inode(mode_t mode, struct sysfs_dirent *);
-extern int sysfs_create(struct dentry *, int mode, int (*init)(struct inode *));
+extern struct dentry *sysfs_get_dentry(struct sysfs_dirent *sd);
+extern void sysfs_link_sibling(struct sysfs_dirent *sd);
+extern void sysfs_unlink_sibling(struct sysfs_dirent *sd);
+extern struct sysfs_dirent *sysfs_get_active(struct sysfs_dirent *sd);
+extern void sysfs_put_active(struct sysfs_dirent *sd);
+extern struct sysfs_dirent *sysfs_get_active_two(struct sysfs_dirent *sd);
+extern void sysfs_put_active_two(struct sysfs_dirent *sd);
+extern void sysfs_addrm_start(struct sysfs_addrm_cxt *acxt,
+ struct sysfs_dirent *parent_sd);
+extern void sysfs_add_one(struct sysfs_addrm_cxt *acxt,
+ struct sysfs_dirent *sd);
+extern void sysfs_remove_one(struct sysfs_addrm_cxt *acxt,
+ struct sysfs_dirent *sd);
+extern int sysfs_addrm_finish(struct sysfs_addrm_cxt *acxt);
-extern int sysfs_dirent_exist(struct sysfs_dirent *, const unsigned char *);
-extern int sysfs_make_dirent(struct sysfs_dirent *, struct dentry *, void *,
- umode_t, int);
-
-extern int sysfs_add_file(struct dentry *, const struct attribute *, int);
-extern int sysfs_hash_and_remove(struct dentry * dir, const char * name);
+extern void sysfs_delete_inode(struct inode *inode);
+extern void sysfs_init_inode(struct sysfs_dirent *sd, struct inode *inode);
+extern struct inode * sysfs_get_inode(struct sysfs_dirent *sd);
+extern void sysfs_instantiate(struct dentry *dentry, struct inode *inode);
+
+extern void release_sysfs_dirent(struct sysfs_dirent * sd);
+extern struct sysfs_dirent *sysfs_find_dirent(struct sysfs_dirent *parent_sd,
+ const unsigned char *name);
+extern struct sysfs_dirent *sysfs_get_dirent(struct sysfs_dirent *parent_sd,
+ const unsigned char *name);
+extern struct sysfs_dirent *sysfs_new_dirent(const char *name, umode_t mode,
+ int type);
+
+extern int sysfs_add_file(struct sysfs_dirent *dir_sd,
+ const struct attribute *attr, int type);
+extern int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const char *name);
extern struct sysfs_dirent *sysfs_find(struct sysfs_dirent *dir, const char * name);
-extern int sysfs_create_subdir(struct kobject *, const char *, struct dentry **);
-extern void sysfs_remove_subdir(struct dentry *);
+extern int sysfs_create_subdir(struct kobject *kobj, const char *name,
+ struct sysfs_dirent **p_sd);
+extern void sysfs_remove_subdir(struct sysfs_dirent *sd);
-extern const unsigned char * sysfs_get_name(struct sysfs_dirent *sd);
-extern void sysfs_drop_dentry(struct sysfs_dirent *sd, struct dentry *parent);
extern int sysfs_setattr(struct dentry *dentry, struct iattr *iattr);
-extern spinlock_t sysfs_lock;
-extern struct rw_semaphore sysfs_rename_sem;
+extern spinlock_t sysfs_assoc_lock;
+extern struct mutex sysfs_mutex;
extern struct super_block * sysfs_sb;
extern const struct file_operations sysfs_dir_operations;
extern const struct file_operations sysfs_file_operations;
extern const struct inode_operations sysfs_dir_inode_operations;
extern const struct inode_operations sysfs_symlink_inode_operations;
-struct sysfs_symlink {
- char * link_name;
- struct kobject * target_kobj;
-};
-
-struct sysfs_buffer {
- struct list_head associates;
- size_t count;
- loff_t pos;
- char * page;
- struct sysfs_ops * ops;
- struct semaphore sem;
- int orphaned;
- int needs_read_fill;
- int event;
-};
-
-struct sysfs_buffer_collection {
- struct list_head associates;
-};
-
-static inline struct kobject * to_kobj(struct dentry * dentry)
-{
- struct sysfs_dirent * sd = dentry->d_fsdata;
- return ((struct kobject *) sd->s_element);
-}
-
-static inline struct attribute * to_attr(struct dentry * dentry)
+static inline unsigned int sysfs_type(struct sysfs_dirent *sd)
{
- struct sysfs_dirent * sd = dentry->d_fsdata;
- return ((struct attribute *) sd->s_element);
-}
-
-static inline struct bin_attribute * to_bin_attr(struct dentry * dentry)
-{
- struct sysfs_dirent * sd = dentry->d_fsdata;
- return ((struct bin_attribute *) sd->s_element);
-}
-
-static inline struct kobject *sysfs_get_kobject(struct dentry *dentry)
-{
- struct kobject * kobj = NULL;
-
- spin_lock(&dcache_lock);
- if (!d_unhashed(dentry)) {
- struct sysfs_dirent * sd = dentry->d_fsdata;
- if (sd->s_type & SYSFS_KOBJ_LINK) {
- struct sysfs_symlink * sl = sd->s_element;
- kobj = kobject_get(sl->target_kobj);
- } else
- kobj = kobject_get(sd->s_element);
- }
- spin_unlock(&dcache_lock);
-
- return kobj;
-}
-
-static inline void release_sysfs_dirent(struct sysfs_dirent * sd)
-{
- if (sd->s_type & SYSFS_KOBJ_LINK) {
- struct sysfs_symlink * sl = sd->s_element;
- kfree(sl->link_name);
- kobject_put(sl->target_kobj);
- kfree(sl);
- }
- kfree(sd->s_iattr);
- kmem_cache_free(sysfs_dir_cachep, sd);
+ return sd->s_flags & SYSFS_TYPE_MASK;
}
static inline struct sysfs_dirent * sysfs_get(struct sysfs_dirent * sd)
static inline void sysfs_put(struct sysfs_dirent * sd)
{
- if (atomic_dec_and_test(&sd->s_count))
+ if (sd && atomic_dec_and_test(&sd->s_count))
release_sysfs_dirent(sd);
}
extern int pci_dma_supported(struct pci_dev *hwdev, u64 mask);
-/* True if the machine supports DAC addressing, and DEV can
- make use of it given MASK. */
-extern int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
-
-/* Convert to/from DAC dma address and struct page. */
-extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *, struct page *,
- unsigned long, int);
-extern struct page *pci_dac_dma_to_page(struct pci_dev *, dma64_addr_t);
-extern unsigned long pci_dac_dma_to_offset(struct pci_dev *, dma64_addr_t);
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr,
- size_t len, int direction)
-{
- /* Nothing to do. */
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr,
- size_t len, int direction)
-{
- /* Nothing to do. */
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
return hose->need_domain_info;
}
-static inline void
-pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
struct pci_dev *alpha_gendev_to_pci(struct device *dev);
#endif /* __KERNEL__ */
*/
#define PCI_DMA_BUS_IS_PHYS (0)
-/*
- * We don't support DAC DMA cycles.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/*
* Whether pci_unmap_{single,page} is a nop depends upon the
* configuration.
return root;
}
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
#endif
include include/asm-generic/Kbuild.asm
+
+header-y += fixed_code.h
extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs);
extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type);
+extern asmlinkage void finish_atomic_sections (struct pt_regs *regs);
+extern char fixed_code_start;
+extern char fixed_code_end;
+extern int atomic_xchg32(void);
+extern int atomic_cas32(void);
+extern int atomic_add32(void);
+extern int atomic_sub32(void);
+extern int atomic_ior32(void);
+extern int atomic_and32(void);
+extern int atomic_xor32(void);
+extern void sigreturn_stub(void);
+
extern void *l1_data_A_sram_alloc(size_t);
extern void *l1_data_B_sram_alloc(size_t);
extern void *l1_inst_sram_alloc(size_t);
u16 size;
};
-u_long icplb_table[MAX_CPLBS+1];
-u_long dcplb_table[MAX_CPLBS+1];
+extern u_long icplb_table[MAX_CPLBS+1];
+extern u_long dcplb_table[MAX_CPLBS+1];
/* Till here we are discussing about the static memory management model.
* However, the operating envoronments commonly define more CPLB
*/
#ifdef CONFIG_CPLB_SWITCH_TAB_L1
-u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
-u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
+extern u_long ipdt_table[MAX_SWITCH_I_CPLBS+1]__attribute__((l1_data));
+extern u_long dpdt_table[MAX_SWITCH_D_CPLBS+1]__attribute__((l1_data));
#ifdef CONFIG_CPLB_INFO
-u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
-u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
+extern u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS]__attribute__((l1_data));
+extern u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS]__attribute__((l1_data));
#endif /* CONFIG_CPLB_INFO */
#else
-u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
-u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
+extern u_long ipdt_table[MAX_SWITCH_I_CPLBS+1];
+extern u_long dpdt_table[MAX_SWITCH_D_CPLBS+1];
#ifdef CONFIG_CPLB_INFO
-u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
-u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
+extern u_long ipdt_swapcount_table[MAX_SWITCH_I_CPLBS];
+extern u_long dpdt_swapcount_table[MAX_SWITCH_D_CPLBS];
#endif /* CONFIG_CPLB_INFO */
#endif /*CONFIG_CPLB_SWITCH_TAB_L1*/
-struct s_cplb {
- struct cplb_tab init_i;
- struct cplb_tab init_d;
- struct cplb_tab switch_i;
- struct cplb_tab switch_d;
-};
+extern unsigned long reserved_mem_dcache_on;
+extern unsigned long reserved_mem_icache_on;
-#if defined(CONFIG_BLKFIN_DCACHE) || defined(CONFIG_BLKFIN_CACHE)
-static struct cplb_desc cplb_data[] = {
- {
- .start = 0,
- .end = SIZE_4K,
- .psize = SIZE_4K,
- .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
- .i_conf = SDRAM_OOPS,
- .d_conf = SDRAM_OOPS,
-#if defined(CONFIG_DEBUG_HUNT_FOR_ZERO)
- .valid = 1,
-#else
- .valid = 0,
-#endif
- .name = "ZERO Pointer Saveguard",
- },
- {
- .start = L1_CODE_START,
- .end = L1_CODE_START + L1_CODE_LENGTH,
- .psize = SIZE_4M,
- .attr = INITIAL_T | SWITCH_T | I_CPLB,
- .i_conf = L1_IMEMORY,
- .d_conf = 0,
- .valid = 1,
- .name = "L1 I-Memory",
- },
- {
- .start = L1_DATA_A_START,
- .end = L1_DATA_B_START + L1_DATA_B_LENGTH,
- .psize = SIZE_4M,
- .attr = INITIAL_T | SWITCH_T | D_CPLB,
- .i_conf = 0,
- .d_conf = L1_DMEMORY,
-#if ((L1_DATA_A_LENGTH > 0) || (L1_DATA_B_LENGTH > 0))
- .valid = 1,
-#else
- .valid = 0,
-#endif
- .name = "L1 D-Memory",
- },
- {
- .start = 0,
- .end = 0, /* dynamic */
- .psize = 0,
- .attr = INITIAL_T | SWITCH_T | I_CPLB | D_CPLB,
- .i_conf = SDRAM_IGENERIC,
- .d_conf = SDRAM_DGENERIC,
- .valid = 1,
- .name = "SDRAM Kernel",
- },
- {
- .start = 0, /* dynamic */
- .end = 0, /* dynamic */
- .psize = 0,
- .attr = INITIAL_T | SWITCH_T | D_CPLB,
- .i_conf = SDRAM_IGENERIC,
- .d_conf = SDRAM_DNON_CHBL,
- .valid = 1,
- .name = "SDRAM RAM MTD",
- },
- {
- .start = 0, /* dynamic */
- .end = 0, /* dynamic */
- .psize = SIZE_1M,
- .attr = INITIAL_T | SWITCH_T | D_CPLB,
- .d_conf = SDRAM_DNON_CHBL,
- .valid = 1,//(DMA_UNCACHED_REGION > 0),
- .name = "SDRAM Uncached DMA ZONE",
- },
- {
- .start = 0, /* dynamic */
- .end = 0, /* dynamic */
- .psize = 0,
- .attr = SWITCH_T | D_CPLB,
- .i_conf = 0, /* dynamic */
- .d_conf = 0, /* dynamic */
- .valid = 1,
- .name = "SDRAM Reserved Memory",
- },
- {
- .start = ASYNC_BANK0_BASE,
- .end = ASYNC_BANK3_BASE + ASYNC_BANK3_SIZE,
- .psize = 0,
- .attr = SWITCH_T | D_CPLB,
- .d_conf = SDRAM_EBIU,
- .valid = 1,
- .name = "ASYNC Memory",
- },
- {
-#if defined(CONFIG_BF561)
- .start = L2_SRAM,
- .end = L2_SRAM_END,
- .psize = SIZE_1M,
- .attr = SWITCH_T | D_CPLB,
- .i_conf = L2_MEMORY,
- .d_conf = L2_MEMORY,
- .valid = 1,
-#else
- .valid = 0,
-#endif
- .name = "L2 Memory",
- }
-};
-#endif
+extern void generate_cpl_tables(void);
--- /dev/null
+/* This file defines the fixed addresses where userspace programs can find
+ atomic code sequences. */
+
+#define FIXED_CODE_START 0x400
+
+#define SIGRETURN_STUB 0x400
+
+#define ATOMIC_SEQS_START 0x410
+
+#define ATOMIC_XCHG32 0x410
+#define ATOMIC_CAS32 0x420
+#define ATOMIC_ADD32 0x430
+#define ATOMIC_SUB32 0x440
+#define ATOMIC_IOR32 0x450
+#define ATOMIC_AND32 0x460
+#define ATOMIC_XOR32 0x470
+
+#define ATOMIC_SEQS_END 0x480
+
+#define FIXED_CODE_END 0x480
#endif
+#ifdef BF548_FAMILY
+#include <asm-blackfin/mach-bf548/gpio.h>
+#endif
+
#ifdef BF561_FAMILY
#define MAX_BLACKFIN_GPIOS 48
+
+#define GPIO_PF0 0
+#define GPIO_PF1 1
+#define GPIO_PF2 2
+#define GPIO_PF3 3
+#define GPIO_PF4 4
+#define GPIO_PF5 5
+#define GPIO_PF6 6
+#define GPIO_PF7 7
+#define GPIO_PF8 8
+#define GPIO_PF9 9
+#define GPIO_PF10 10
+#define GPIO_PF11 11
+#define GPIO_PF12 12
+#define GPIO_PF13 13
+#define GPIO_PF14 14
+#define GPIO_PF15 15
+#define GPIO_PF16 16
+#define GPIO_PF17 17
+#define GPIO_PF18 18
+#define GPIO_PF19 19
+#define GPIO_PF20 20
+#define GPIO_PF21 21
+#define GPIO_PF22 22
+#define GPIO_PF23 23
+#define GPIO_PF24 24
+#define GPIO_PF25 25
+#define GPIO_PF26 26
+#define GPIO_PF27 27
+#define GPIO_PF28 28
+#define GPIO_PF29 29
+#define GPIO_PF30 30
+#define GPIO_PF31 31
+#define GPIO_PF32 32
+#define GPIO_PF33 33
+#define GPIO_PF34 34
+#define GPIO_PF35 35
+#define GPIO_PF36 36
+#define GPIO_PF37 37
+#define GPIO_PF38 38
+#define GPIO_PF39 39
+#define GPIO_PF40 40
+#define GPIO_PF41 41
+#define GPIO_PF42 42
+#define GPIO_PF43 43
+#define GPIO_PF44 44
+#define GPIO_PF45 45
+#define GPIO_PF46 46
+#define GPIO_PF47 47
+
#define PORT_FIO0 GPIO_0
#define PORT_FIO1 GPIO_16
#define PORT_FIO2 GPIO_32
* MODIFICATION HISTORY :
**************************************************************/
+#ifndef BF548_FAMILY
void set_gpio_dir(unsigned short, unsigned short);
void set_gpio_inen(unsigned short, unsigned short);
void set_gpio_polar(unsigned short, unsigned short);
unsigned short dummy16;
unsigned short inen;
};
+#endif
#ifdef CONFIG_PM
#define PM_WAKE_RISING 0x1
void gpio_set_value(unsigned short gpio, unsigned short arg);
unsigned short gpio_get_value(unsigned short gpio);
+#ifndef BF548_FAMILY
#define gpio_get_value(gpio) get_gpio_data(gpio)
#define gpio_set_value(gpio, value) set_gpio_data(gpio, value)
+#endif
void gpio_direction_input(unsigned short gpio);
void gpio_direction_output(unsigned short gpio);
* SOFTIRQ_MASK: 0x00ff0000
*/
+#if NR_IRQS > 256
+#define HARDIRQ_BITS 9
+#else
#define HARDIRQ_BITS 8
+#endif
#ifdef NR_IRQS
# if (1 << HARDIRQ_BITS) < NR_IRQS
--- /dev/null
+/*
+ * File: include/asm-blackfin/kgdb.h
+ * Based on:
+ * Author: Sonic Zhang
+ *
+ * Created:
+ * Description:
+ *
+ * Rev: $Id: kgdb_bfin_linux-2.6.x.patch 4934 2007-02-13 09:32:11Z sonicz $
+ *
+ * Modified:
+ * Copyright 2005-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __ASM_BLACKFIN_KGDB_H__
+#define __ASM_BLACKFIN_KGDB_H__
+
+#include <linux/ptrace.h>
+
+/* gdb locks */
+#define KGDB_MAX_NO_CPUS 8
+
+/************************************************************************/
+/* BUFMAX defines the maximum number of characters in inbound/outbound buffers*/
+/* at least NUMREGBYTES*2 are needed for register packets */
+/* Longer buffer is needed to list all threads */
+#define BUFMAX 2048
+
+/*
+ * Note that this register image is different from
+ * the register image that Linux produces at interrupt time.
+ *
+ * Linux's register image is defined by struct pt_regs in ptrace.h.
+ */
+enum regnames {
+ /* Core Registers */
+ BFIN_R0 = 0,
+ BFIN_R1,
+ BFIN_R2,
+ BFIN_R3,
+ BFIN_R4,
+ BFIN_R5,
+ BFIN_R6,
+ BFIN_R7,
+ BFIN_P0,
+ BFIN_P1,
+ BFIN_P2,
+ BFIN_P3,
+ BFIN_P4,
+ BFIN_P5,
+ BFIN_SP,
+ BFIN_FP,
+ BFIN_I0,
+ BFIN_I1,
+ BFIN_I2,
+ BFIN_I3,
+ BFIN_M0,
+ BFIN_M1,
+ BFIN_M2,
+ BFIN_M3,
+ BFIN_B0,
+ BFIN_B1,
+ BFIN_B2,
+ BFIN_B3,
+ BFIN_L0,
+ BFIN_L1,
+ BFIN_L2,
+ BFIN_L3,
+ BFIN_A0_DOT_X,
+ BFIN_A0_DOT_W,
+ BFIN_A1_DOT_X,
+ BFIN_A1_DOT_W,
+ BFIN_ASTAT,
+ BFIN_RETS,
+ BFIN_LC0,
+ BFIN_LT0,
+ BFIN_LB0,
+ BFIN_LC1,
+ BFIN_LT1,
+ BFIN_LB1,
+ BFIN_CYCLES,
+ BFIN_CYCLES2,
+ BFIN_USP,
+ BFIN_SEQSTAT,
+ BFIN_SYSCFG,
+ BFIN_RETI,
+ BFIN_RETX,
+ BFIN_RETN,
+ BFIN_RETE,
+
+ /* Pseudo Registers */
+ BFIN_PC,
+ BFIN_CC,
+ BFIN_EXTRA1, /* Address of .text section. */
+ BFIN_EXTRA2, /* Address of .data section. */
+ BFIN_EXTRA3, /* Address of .bss section. */
+ BFIN_FDPIC_EXEC,
+ BFIN_FDPIC_INTERP,
+
+ /* MMRs */
+ BFIN_IPEND,
+
+ /* LAST ENTRY SHOULD NOT BE CHANGED. */
+ BFIN_NUM_REGS /* The number of all registers. */
+};
+
+/* Number of bytes of registers. */
+#define NUMREGBYTES BFIN_NUM_REGS*4
+
+#define BREAKPOINT() asm(" EXCPT 2;");
+#define BREAK_INSTR_SIZE 2
+#define HW_BREAKPOINT_NUM 6
+
+/* Instruction watchpoint address control register bits mask */
+#define WPPWR 0x1
+#define WPIREN01 0x2
+#define WPIRINV01 0x4
+#define WPIAEN0 0x8
+#define WPIAEN1 0x10
+#define WPICNTEN0 0x20
+#define WPICNTEN1 0x40
+#define EMUSW0 0x80
+#define EMUSW1 0x100
+#define WPIREN23 0x200
+#define WPIRINV23 0x400
+#define WPIAEN2 0x800
+#define WPIAEN3 0x1000
+#define WPICNTEN2 0x2000
+#define WPICNTEN3 0x4000
+#define EMUSW2 0x8000
+#define EMUSW3 0x10000
+#define WPIREN45 0x20000
+#define WPIRINV45 0x40000
+#define WPIAEN4 0x80000
+#define WPIAEN5 0x100000
+#define WPICNTEN4 0x200000
+#define WPICNTEN5 0x400000
+#define EMUSW4 0x800000
+#define EMUSW5 0x1000000
+#define WPAND 0x2000000
+
+/* Data watchpoint address control register bits mask */
+#define WPDREN01 0x1
+#define WPDRINV01 0x2
+#define WPDAEN0 0x4
+#define WPDAEN1 0x8
+#define WPDCNTEN0 0x10
+#define WPDCNTEN1 0x20
+#define WPDSRC0 0xc0
+#define WPDACC0 0x300
+#define WPDSRC1 0xc00
+#define WPDACC1 0x3000
+
+/* Watchpoint status register bits mask */
+#define STATIA0 0x1
+#define STATIA1 0x2
+#define STATIA2 0x4
+#define STATIA3 0x8
+#define STATIA4 0x10
+#define STATIA5 0x20
+#define STATDA0 0x40
+#define STATDA1 0x80
+
+extern void kgdb_print(const char *fmt, ...);
+
+#endif
#define CH_MEM_STREAM1_DEST 10 /* TX */
#define CH_MEM_STREAM1_SRC 11 /* RX */
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
#endif
--- /dev/null
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define P_PPI0_CLK (P_DONTCARE)
+#define P_PPI0_FS1 (P_DONTCARE)
+#define P_PPI0_FS2 (P_DONTCARE)
+#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF8))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF9))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF10))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF11))
+#define P_PPI0_D0 (P_DONTCARE)
+#define P_PPI0_D1 (P_DONTCARE)
+#define P_PPI0_D2 (P_DONTCARE)
+#define P_PPI0_D3 (P_DONTCARE)
+#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF14))
+#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF13))
+#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF12))
+
+#define P_SPORT1_TSCLK (P_DONTCARE)
+#define P_SPORT1_RSCLK (P_DONTCARE)
+#define P_SPORT0_TSCLK (P_DONTCARE)
+#define P_SPORT0_RSCLK (P_DONTCARE)
+#define P_UART0_RX (P_DONTCARE)
+#define P_UART0_TX (P_DONTCARE)
+#define P_SPORT1_DRSEC (P_DONTCARE)
+#define P_SPORT1_RFS (P_DONTCARE)
+#define P_SPORT1_DTPRI (P_DONTCARE)
+#define P_SPORT1_DTSEC (P_DONTCARE)
+#define P_SPORT1_TFS (P_DONTCARE)
+#define P_SPORT1_DRPRI (P_DONTCARE)
+#define P_SPORT0_DRSEC (P_DONTCARE)
+#define P_SPORT0_RFS (P_DONTCARE)
+#define P_SPORT0_DTPRI (P_DONTCARE)
+#define P_SPORT0_DTSEC (P_DONTCARE)
+#define P_SPORT0_TFS (P_DONTCARE)
+#define P_SPORT0_DRPRI (P_DONTCARE)
+
+#define P_SPI0_MOSI (P_DONTCARE)
+#define P_SPI0_MIS0 (P_DONTCARE)
+#define P_SPI0_SCK (P_DONTCARE)
+#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
+
+#define P_TMR2 (P_DONTCARE)
+#define P_TMR1 (P_DONTCARE)
+#define P_TMR0 (P_DONTCARE)
+#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF1))
+
+
+
+
+
+#endif /* _MACH_PORTMUX_H_ */
#define CH_MEM_STREAM1_DEST 14 /* TX */
#define CH_MEM_STREAM1_SRC 15 /* RX */
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
#endif
--- /dev/null
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_TACLK0 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(1))
+#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(1))
+#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(1))
+#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(1))
+#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(1))
+#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(1))
+#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(1))
+
+#define P_MII0_ETxD0 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_MII0_ETxD1 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_MII0_ETxD2 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_MII0_ETxD3 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_MII0_ETxEN (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_MII0_TxCLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_MII0_PHYINT (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_MII0_COL (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#define P_MII0_ERxD0 (P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_MII0_ERxD1 (P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_MII0_ERxD2 (P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_MII0_ERxD3 (P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_MII0_ERxDV (P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_MII0_ERxCLK (P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_MII0_ERxER (P_DEFINED | P_IDENT(GPIO_PH14) | P_FUNCT(0))
+#define P_MII0_CRS (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(0))
+#define P_RMII0_REF_CLK (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_RMII0_MDINT (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_RMII0_CRS_DV (P_DEFINED | P_IDENT(GPIO_PH15) | P_FUNCT(1))
+
+#define PORT_PJ0 (GPIO_PH15 + 1)
+#define PORT_PJ1 (GPIO_PH15 + 2)
+#define PORT_PJ2 (GPIO_PH15 + 3)
+#define PORT_PJ3 (GPIO_PH15 + 4)
+#define PORT_PJ4 (GPIO_PH15 + 5)
+#define PORT_PJ5 (GPIO_PH15 + 6)
+#define PORT_PJ6 (GPIO_PH15 + 7)
+#define PORT_PJ7 (GPIO_PH15 + 8)
+#define PORT_PJ8 (GPIO_PH15 + 9)
+#define PORT_PJ9 (GPIO_PH15 + 10)
+#define PORT_PJ10 (GPIO_PH15 + 11)
+#define PORT_PJ11 (GPIO_PH15 + 12)
+
+#define P_MDC (P_DEFINED | P_IDENT(PORT_PJ0) | P_FUNCT(0))
+#define P_MDIO (P_DEFINED | P_IDENT(PORT_PJ1) | P_FUNCT(0))
+#define P_TWI0_SCL (P_DEFINED | P_IDENT(PORT_PJ2) | P_FUNCT(0))
+#define P_TWI0_SDA (P_DEFINED | P_IDENT(PORT_PJ3) | P_FUNCT(0))
+#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(0))
+#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(0))
+#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(PORT_PJ6) | P_FUNCT(0))
+#define P_SPORT0_RFS (P_DEFINED | P_IDENT(PORT_PJ7) | P_FUNCT(0))
+#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(PORT_PJ8) | P_FUNCT(0))
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(PORT_PJ9) | P_FUNCT(0))
+#define P_SPORT0_TFS (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(0))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
+#define P_CAN0_RX (P_DEFINED | P_IDENT(PORT_PJ4) | P_FUNCT(1))
+#define P_CAN0_TX (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(1))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(PORT_PJ10) | P_FUNCT(1))
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(PORT_PJ11) | P_FUNCT(1))
+#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(PORT_PJ5) | P_FUNCT(2))
+
+#endif /* _MACH_PORTMUX_H_ */
--- /dev/null
+
+/*
+ * File: include/asm-blackfin/mach-bf548/anomaly.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_ANOMALY_H_
+#define _MACH_ANOMALY_H_
+#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
+ slot1 and store of a P register in slot 2 is not
+ supported */
+#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
+ Channel DMA stops */
+#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
+ registers. */
+#define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the
+ Shadow of a Conditional Branch */
+#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
+ interrupt not functional */
+#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
+ SPORT external receive and transmit clocks. */
+#define ANOMALY_05000272 /* Certain data cache write through modes fail for
+ VDDint <=0.9V */
+#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
+ not restored */
+#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
+ Boundary of Reserved Memory */
+#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
+ LC Registers Are Interrupted */
+#define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */
+#define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */
+#define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to
+ the USB FIFO Simultaneously */
+#define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write()
+ function */
+#define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional
+ */
+#define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */
+#define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM
+ Skew */
+#define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */
+#define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration
+ of Host DMA Port */
+#define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent
+ Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
+
+#endif /* _MACH_ANOMALY_H_ */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf548/bf548.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description: System MMR register and memory map for ADSP-BF548
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __MACH_BF548_H__
+#define __MACH_BF548_H__
+
+#define SUPPORTED_REVID 0
+
+#define OFFSET_(x) ((x) & 0x0000FFFF)
+
+/*some misc defines*/
+#define IMASK_IVG15 0x8000
+#define IMASK_IVG14 0x4000
+#define IMASK_IVG13 0x2000
+#define IMASK_IVG12 0x1000
+
+#define IMASK_IVG11 0x0800
+#define IMASK_IVG10 0x0400
+#define IMASK_IVG9 0x0200
+#define IMASK_IVG8 0x0100
+
+#define IMASK_IVG7 0x0080
+#define IMASK_IVGTMR 0x0040
+#define IMASK_IVGHW 0x0020
+
+/***************************/
+
+
+#define BLKFIN_DSUBBANKS 4
+#define BLKFIN_DWAYS 2
+#define BLKFIN_DLINES 64
+#define BLKFIN_ISUBBANKS 4
+#define BLKFIN_IWAYS 4
+#define BLKFIN_ILINES 32
+
+#define WAY0_L 0x1
+#define WAY1_L 0x2
+#define WAY01_L 0x3
+#define WAY2_L 0x4
+#define WAY02_L 0x5
+#define WAY12_L 0x6
+#define WAY012_L 0x7
+
+#define WAY3_L 0x8
+#define WAY03_L 0x9
+#define WAY13_L 0xA
+#define WAY013_L 0xB
+
+#define WAY32_L 0xC
+#define WAY320_L 0xD
+#define WAY321_L 0xE
+#define WAYALL_L 0xF
+
+#define DMC_ENABLE (2<<2) /*yes, 2, not 1 */
+
+/********************************* EBIU Settings ************************************/
+#define AMBCTL0VAL ((CONFIG_BANK_1 << 16) | CONFIG_BANK_0)
+#define AMBCTL1VAL ((CONFIG_BANK_3 << 16) | CONFIG_BANK_2)
+
+#ifdef CONFIG_C_AMBEN_ALL
+#define V_AMBEN AMBEN_ALL
+#endif
+#ifdef CONFIG_C_AMBEN
+#define V_AMBEN 0x0
+#endif
+#ifdef CONFIG_C_AMBEN_B0
+#define V_AMBEN AMBEN_B0
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1
+#define V_AMBEN AMBEN_B0_B1
+#endif
+#ifdef CONFIG_C_AMBEN_B0_B1_B2
+#define V_AMBEN AMBEN_B0_B1_B2
+#endif
+#ifdef CONFIG_C_AMCKEN
+#define V_AMCKEN AMCKEN
+#else
+#define V_AMCKEN 0x0
+#endif
+
+#define AMGCTLVAL (V_AMBEN | V_AMCKEN)
+
+#define MAX_VC 650000000
+#define MIN_VC 50000000
+
+/********************************PLL Settings **************************************/
+#ifdef CONFIG_BFIN_KERNEL_CLOCK
+#if (CONFIG_VCO_MULT < 0)
+#error "VCO Multiplier is less than 0. Please select a different value"
+#endif
+
+#if (CONFIG_VCO_MULT == 0)
+#error "VCO Multiplier should be greater than 0. Please select a different value"
+#endif
+
+#if (CONFIG_VCO_MULT > 64)
+#error "VCO Multiplier is more than 64. Please select a different value"
+#endif
+
+#ifndef CONFIG_CLKIN_HALF
+#define CONFIG_VCO_HZ (CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
+#else
+#define CONFIG_VCO_HZ ((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
+#endif
+
+#ifndef CONFIG_PLL_BYPASS
+#define CONFIG_CCLK_HZ (CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
+#define CONFIG_SCLK_HZ (CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
+#else
+#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ
+#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ
+#endif
+
+#if (CONFIG_SCLK_DIV < 1)
+#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
+#endif
+
+#if (CONFIG_SCLK_DIV > 15)
+#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
+#endif
+
+#if (CONFIG_CCLK_DIV != 1)
+#if (CONFIG_CCLK_DIV != 2)
+#if (CONFIG_CCLK_DIV != 4)
+#if (CONFIG_CCLK_DIV != 8)
+#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
+#endif
+#endif
+#endif
+#endif
+
+#if (CONFIG_VCO_HZ > MAX_VC)
+#error "VCO selected is more than maximum value. Please change the VCO multipler"
+#endif
+
+#if (CONFIG_SCLK_HZ > 133000000)
+#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
+#endif
+
+#if (CONFIG_SCLK_HZ < 27000000)
+#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
+#endif
+
+#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ)
+#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
+#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
+#error "Please select sclk less than cclk"
+#endif
+#endif
+#endif
+
+#if (CONFIG_CCLK_DIV == 1)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV1
+#endif
+#if (CONFIG_CCLK_DIV == 2)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV2
+#endif
+#if (CONFIG_CCLK_DIV == 4)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV4
+#endif
+#if (CONFIG_CCLK_DIV == 8)
+#define CONFIG_CCLK_ACT_DIV CCLK_DIV8
+#endif
+#ifndef CONFIG_CCLK_ACT_DIV
+#define CONFIG_CCLK_ACT_DIV CONFIG_CCLK_DIV_not_defined_properly
+#endif
+
+#endif /* CONFIG_BFIN_KERNEL_CLOCK */
+
+#ifdef CONFIG_BF542
+#define CPU "BF542"
+#define CPUID 0x027c8000
+#endif
+#ifdef CONFIG_BF544
+#define CPU "BF544"
+#define CPUID 0x027c8000
+#endif
+#ifdef CONFIG_BF548
+#define CPU "BF548"
+#define CPUID 0x027c6000
+#endif
+#ifdef CONFIG_BF549
+#define CPU "BF549"
+#endif
+#ifndef CPU
+#define CPU "UNKNOWN"
+#define CPUID 0x0
+#endif
+
+#if (CONFIG_MEM_SIZE % 4)
+#error "SDRAM mem size must be multible of 4MB"
+#endif
+
+#define SDRAM_IGENERIC (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
+#define SDRAM_IKERNEL (SDRAM_IGENERIC | CPLB_LOCK)
+#define L1_IMEMORY ( CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
+#define SDRAM_INON_CHBL ( CPLB_USER_RD | CPLB_VALID)
+
+/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
+
+#define ANOMALY_05000158_WORKAROUND 0x200
+#ifdef CONFIG_BLKFIN_WB /*Write Back Policy */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_DIRTY \
+ | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
+#else /*Write Through */
+#define SDRAM_DGENERIC (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \
+ | CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
+#endif
+
+
+#define L1_DMEMORY (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
+#define SDRAM_DNON_CHBL (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
+#define SDRAM_EBIU (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
+#define SDRAM_OOPS (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
+
+#define SIZE_1K 0x00000400 /* 1K */
+#define SIZE_4K 0x00001000 /* 4K */
+#define SIZE_1M 0x00100000 /* 1M */
+#define SIZE_4M 0x00400000 /* 4M */
+
+#define MAX_CPLBS (16 * 2)
+
+/*
+* Number of required data CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 16 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Data Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+* 1 for ASYNC Memory
+*/
+
+
+#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2)
+
+/*
+* Number of required instruction CPLB switchtable entries
+* MEMSIZE / 4 (we mostly install 4M page size CPLBs
+* approx 12 for smaller 1MB page size CPLBs for allignment purposes
+* 1 for L1 Instruction Memory
+* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
+*/
+
+#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2)
+
+#endif /* __MACH_BF48_H__ */
--- /dev/null
+#include <linux/serial.h>
+#include <asm/dma.h>
+
+#define NR_PORTS 4
+
+#define OFFSET_DLL 0x00 /* Divisor Latch (Low-Byte) */
+#define OFFSET_DLH 0x04 /* Divisor Latch (High-Byte) */
+#define OFFSET_GCTL 0x08 /* Global Control Register */
+#define OFFSET_LCR 0x0C /* Line Control Register */
+#define OFFSET_MCR 0x10 /* Modem Control Register */
+#define OFFSET_LSR 0x14 /* Line Status Register */
+#define OFFSET_MSR 0x18 /* Modem Status Register */
+#define OFFSET_SCR 0x1C /* SCR Scratch Register */
+#define OFFSET_IER_SET 0x20 /* Set Interrupt Enable Register */
+#define OFFSET_IER_CLEAR 0x24 /* Clear Interrupt Enable Register */
+#define OFFSET_THR 0x28 /* Transmit Holding register */
+#define OFFSET_RBR 0x2C /* Receive Buffer register */
+
+#define UART_GET_CHAR(uart) bfin_read16(((uart)->port.membase + OFFSET_RBR))
+#define UART_GET_DLL(uart) bfin_read16(((uart)->port.membase + OFFSET_DLL))
+#define UART_GET_DLH(uart) bfin_read16(((uart)->port.membase + OFFSET_DLH))
+#define UART_GET_IER(uart) bfin_read16(((uart)->port.membase + OFFSET_IER_SET))
+#define UART_GET_LCR(uart) bfin_read16(((uart)->port.membase + OFFSET_LCR))
+#define UART_GET_LSR(uart) bfin_read16(((uart)->port.membase + OFFSET_LSR))
+#define UART_GET_GCTL(uart) bfin_read16(((uart)->port.membase + OFFSET_GCTL))
+
+#define UART_PUT_CHAR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_THR),v)
+#define UART_PUT_DLL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLL),v)
+#define UART_SET_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_SET),v)
+#define UART_CLEAR_IER(uart,v) bfin_write16(((uart)->port.membase + OFFSET_IER_CLEAR),v)
+#define UART_PUT_DLH(uart,v) bfin_write16(((uart)->port.membase + OFFSET_DLH),v)
+#define UART_PUT_LSR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LSR),v)
+#define UART_PUT_LCR(uart,v) bfin_write16(((uart)->port.membase + OFFSET_LCR),v)
+#define UART_PUT_GCTL(uart,v) bfin_write16(((uart)->port.membase + OFFSET_GCTL),v)
+
+#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
+# define CONFIG_SERIAL_BFIN_CTSRTS
+
+# ifndef CONFIG_UART0_CTS_PIN
+# define CONFIG_UART0_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART0_RTS_PIN
+# define CONFIG_UART0_RTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_CTS_PIN
+# define CONFIG_UART1_CTS_PIN -1
+# endif
+
+# ifndef CONFIG_UART1_RTS_PIN
+# define CONFIG_UART1_RTS_PIN -1
+# endif
+#endif
+/*
+ * The pin configuration is different from schematic
+ */
+struct bfin_serial_port {
+ struct uart_port port;
+ unsigned int old_status;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ int tx_done;
+ int tx_count;
+ struct circ_buf rx_dma_buf;
+ struct timer_list rx_dma_timer;
+ int rx_dma_nrows;
+ unsigned int tx_dma_channel;
+ unsigned int rx_dma_channel;
+ struct work_struct tx_dma_workqueue;
+#else
+ struct work_struct cts_workqueue;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int cts_pin;
+ int rts_pin;
+#endif
+};
+
+struct bfin_serial_port bfin_serial_ports[NR_PORTS];
+struct bfin_serial_res {
+ unsigned long uart_base_addr;
+ int uart_irq;
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ unsigned int uart_tx_dma_channel;
+ unsigned int uart_rx_dma_channel;
+#endif
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ int uart_cts_pin;
+ int uart_rts_pin;
+#endif
+};
+
+struct bfin_serial_res bfin_serial_resource[] = {
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ {
+ 0xFFC00400,
+ IRQ_UART0_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART0_TX,
+ CH_UART0_RX,
+#endif
+#ifdef CONFIG_BFIN_UART0_CTSRTS
+ CONFIG_UART0_CTS_PIN,
+ CONFIG_UART0_RTS_PIN,
+#endif
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ {
+ 0xFFC02000,
+ IRQ_UART1_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART1_TX,
+ CH_UART1_RX,
+#endif
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART2
+ {
+ 0xFFC02100,
+ IRQ_UART2_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART2_TX,
+ CH_UART2_RX,
+#endif
+#ifdef CONFIG_BFIN_UART2_CTSRTS
+ CONFIG_UART2_CTS_PIN,
+ CONFIG_UART2_RTS_PIN,
+#endif
+ },
+#endif
+#ifdef CONFIG_SERIAL_BFIN_UART3
+ {
+ 0xFFC03100,
+ IRQ_UART3_RX,
+#ifdef CONFIG_SERIAL_BFIN_DMA
+ CH_UART3_TX,
+ CH_UART3_RX,
+#endif
+ },
+#endif
+};
+
+int nr_ports = ARRAY_SIZE(bfin_serial_resource);
+
+static void bfin_serial_hw_init(struct bfin_serial_port *uart)
+{
+#ifdef CONFIG_SERIAL_BFIN_UART0
+ /* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
+ bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
+ bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART1
+ /* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
+ bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
+ bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
+#ifdef CONFIG_BFIN_UART1_CTSRTS
+ /* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
+ bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
+ bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
+#endif
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART2
+ /* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
+ bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
+ bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
+#endif
+
+#ifdef CONFIG_SERIAL_BFIN_UART3
+ /* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
+ bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
+ bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
+#ifdef CONFIG_BFIN_UART3_CTSRTS
+ /* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
+ bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
+ bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
+#endif
+#endif
+ SSYNC();
+#ifdef CONFIG_SERIAL_BFIN_CTSRTS
+ if (uart->cts_pin >= 0) {
+ gpio_request(uart->cts_pin, NULL);
+ gpio_direction_input(uart->cts_pin);
+ }
+
+ if (uart->rts_pin >= 0) {
+ gpio_request(uart->rts_pin, NULL);
+ gpio_direction_output(uart->rts_pin);
+ }
+#endif
+}
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf548/blackfin.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ *
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#ifndef _MACH_BLACKFIN_H_
+#define _MACH_BLACKFIN_H_
+
+#define BF548_FAMILY
+
+#include "bf548.h"
+#include "mem_map.h"
+#include "anomaly.h"
+
+#ifdef CONFIG_BF542
+#include "defBF542.h"
+#endif
+
+#ifdef CONFIG_BF544
+#include "defBF544.h"
+#endif
+
+#ifdef CONFIG_BF548
+#include "defBF548.h"
+#endif
+
+#ifdef CONFIG_BF549
+#include "defBF549.h"
+#endif
+
+#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#ifdef CONFIG_BF542
+#include "cdefBF542.h"
+#endif
+
+#ifdef CONFIG_BF544
+#include "cdefBF544.h"
+#endif
+#ifdef CONFIG_BF548
+#include "cdefBF548.h"
+#endif
+#ifdef CONFIG_BF549
+#include "cdefBF549.h"
+#endif
+
+/* UART 1*/
+#define bfin_read_UART_THR() bfin_read_UART1_THR()
+#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val)
+#define bfin_read_UART_RBR() bfin_read_UART1_RBR()
+#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val)
+#define bfin_read_UART_DLL() bfin_read_UART1_DLL()
+#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val)
+#define bfin_read_UART_IER() bfin_read_UART1_IER()
+#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val)
+#define bfin_read_UART_DLH() bfin_read_UART1_DLH()
+#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val)
+#define bfin_read_UART_IIR() bfin_read_UART1_IIR()
+#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val)
+#define bfin_read_UART_LCR() bfin_read_UART1_LCR()
+#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val)
+#define bfin_read_UART_MCR() bfin_read_UART1_MCR()
+#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val)
+#define bfin_read_UART_LSR() bfin_read_UART1_LSR()
+#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val)
+#define bfin_read_UART_SCR() bfin_read_UART1_SCR()
+#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val)
+#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL()
+#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val)
+
+#endif
+
+/* MAP used DEFINES from BF533 to BF54x - so we don't need to change
+ * them in the driver, kernel, etc. */
+
+/* UART_IIR Register */
+#define STATUS(x) ((x << 1) & 0x06)
+#define STATUS_P1 0x02
+#define STATUS_P0 0x01
+
+/* UART 0*/
+
+/* DMA Channnel */
+#define bfin_read_CH_UART_RX() bfin_read_CH_UART1_RX()
+#define bfin_write_CH_UART_RX(val) bfin_write_CH_UART1_RX(val)
+#define bfin_read_CH_UART_TX() bfin_read_CH_UART1_TX()
+#define bfin_write_CH_UART_TX(val) bfin_write_CH_UART1_TX(val)
+#define CH_UART_RX CH_UART1_RX
+#define CH_UART_TX CH_UART1_TX
+
+/* System Interrupt Controller */
+#define bfin_read_IRQ_UART_RX() bfin_read_IRQ_UART1_RX()
+#define bfin_write_IRQ_UART_RX(val) bfin_write_IRQ_UART1_RX(val)
+#define bfin_read_IRQ_UART_TX() bfin_read_IRQ_UART1_TX()
+#define bfin_write_IRQ_UART_TX(val) bfin_write_IRQ_UART1_TX(val)
+#define bfin_read_IRQ_UART_ERROR() bfin_read_IRQ_UART1_ERROR()
+#define bfin_write_IRQ_UART_ERROR(val) bfin_write_IRQ_UART1_ERROR(val)
+#define IRQ_UART_RX IRQ_UART1_RX
+#define IRQ_UART_TX IRQ_UART1_TX
+#define IRQ_UART_ERROR IRQ_UART1_ERROR
+
+/* MMR Registers*/
+#define bfin_read_UART_THR() bfin_read_UART1_THR()
+#define bfin_write_UART_THR(val) bfin_write_UART1_THR(val)
+#define bfin_read_UART_RBR() bfin_read_UART1_RBR()
+#define bfin_write_UART_RBR(val) bfin_write_UART1_RBR(val)
+#define bfin_read_UART_DLL() bfin_read_UART1_DLL()
+#define bfin_write_UART_DLL(val) bfin_write_UART1_DLL(val)
+#define bfin_read_UART_IER() bfin_read_UART1_IER()
+#define bfin_write_UART_IER(val) bfin_write_UART1_IER(val)
+#define bfin_read_UART_DLH() bfin_read_UART1_DLH()
+#define bfin_write_UART_DLH(val) bfin_write_UART1_DLH(val)
+#define bfin_read_UART_IIR() bfin_read_UART1_IIR()
+#define bfin_write_UART_IIR(val) bfin_write_UART1_IIR(val)
+#define bfin_read_UART_LCR() bfin_read_UART1_LCR()
+#define bfin_write_UART_LCR(val) bfin_write_UART1_LCR(val)
+#define bfin_read_UART_MCR() bfin_read_UART1_MCR()
+#define bfin_write_UART_MCR(val) bfin_write_UART1_MCR(val)
+#define bfin_read_UART_LSR() bfin_read_UART1_LSR()
+#define bfin_write_UART_LSR(val) bfin_write_UART1_LSR(val)
+#define bfin_read_UART_SCR() bfin_read_UART1_SCR()
+#define bfin_write_UART_SCR(val) bfin_write_UART1_SCR(val)
+#define bfin_read_UART_GCTL() bfin_read_UART1_GCTL()
+#define bfin_write_UART_GCTL(val) bfin_write_UART1_GCTL(val)
+#define UART_THR UART1_THR
+#define UART_RBR UART1_RBR
+#define UART_DLL UART1_DLL
+#define UART_IER UART1_IER
+#define UART_DLH UART1_DLH
+#define UART_IIR UART1_IIR
+#define UART_LCR UART1_LCR
+#define UART_MCR UART1_MCR
+#define UART_LSR UART1_LSR
+#define UART_SCR UART1_SCR
+#define UART_GCTL UART1_GCTL
+
+/* PLL_DIV Masks */
+#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
+#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
+#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */
+#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */
+
+#endif
#ifndef _CDEF_BF54X_H
#define _CDEF_BF54X_H
-#include <defBF54x_base.h>
+#include "defBF54x_base.h"
+#include <asm/system.h>
/* ************************************************************** */
/* SYSTEM & MMR ADDRESS DEFINITIONS COMMON TO ALL ADSP-BF54x */
#define bfin_read_PLL_DIV() bfin_read16(PLL_DIV)
#define bfin_write_PLL_DIV(val) bfin_write16(PLL_DIV, val)
#define bfin_read_VR_CTL() bfin_read16(VR_CTL)
-#define bfin_write_VR_CTL(val) bfin_write16(VR_CTL, val)
+/* Writing to VR_CTL initiates a PLL relock sequence. */
+static __inline__ void bfin_write_VR_CTL(unsigned int val)
+{
+ unsigned long flags, iwr0, iwr1, iwr2;
+
+ /* Enable the PLL Wakeup bit in SIC IWR */
+ iwr0 = bfin_read32(SIC_IWR0);
+ iwr1 = bfin_read32(SIC_IWR1);
+ iwr2 = bfin_read32(SIC_IWR2);
+ /* Only allow PPL Wakeup) */
+ bfin_write32(SIC_IWR0, IWR_ENABLE(0));
+ bfin_write32(SIC_IWR1, 0);
+ bfin_write32(SIC_IWR2, 0);
+
+ bfin_write16(VR_CTL, val);
+ __builtin_bfin_ssync();
+
+ local_irq_save(flags);
+ asm("IDLE;");
+ local_irq_restore(flags);
+ bfin_write32(SIC_IWR0, iwr0);
+ bfin_write32(SIC_IWR1, iwr1);
+ bfin_write32(SIC_IWR2, iwr2);
+}
#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT, val)
#define bfin_read_PLL_LOCKCNT() bfin_read16(PLL_LOCKCNT)
#define bfin_write_SIC_IMASK1(val) bfin_write32(SIC_IMASK1, val)
#define bfin_read_SIC_IMASK2() bfin_read32(SIC_IMASK2)
#define bfin_write_SIC_IMASK2(val) bfin_write32(SIC_IMASK2, val)
+#define bfin_read_SIC_IMASK(x) bfin_read32(SIC_IMASK0 + (x << 2))
+#define bfin_write_SIC_IMASK(x, val) bfin_write32((SIC_IMASK0 + (x << 2)), val)
+
#define bfin_read_SIC_ISR0() bfin_read32(SIC_ISR0)
#define bfin_write_SIC_ISR0(val) bfin_write32(SIC_ISR0, val)
#define bfin_read_SIC_ISR1() bfin_read32(SIC_ISR1)
#define bfin_write_SIC_ISR1(val) bfin_write32(SIC_ISR1, val)
#define bfin_read_SIC_ISR2() bfin_read32(SIC_ISR2)
#define bfin_write_SIC_ISR2(val) bfin_write32(SIC_ISR2, val)
+#define bfin_read_SIC_ISR(x) bfin_read32(SIC_ISR0 + (x << 2))
+#define bfin_write_SIC_ISR(x, val) bfin_write32((SIC_ISR0 + (x << 2)), val)
+
#define bfin_read_SIC_IWR0() bfin_read32(SIC_IWR0)
#define bfin_write_SIC_IWR0(val) bfin_write32(SIC_IWR0, val)
#define bfin_read_SIC_IWR1() bfin_read32(SIC_IWR1)
#define bfin_read_MDMA_D0_NEXT_DESC_PTR() bfin_read32(MDMA_D0_NEXT_DESC_PTR)
#define bfin_write_MDMA_D0_NEXT_DESC_PTR(val) bfin_write32(MDMA_D0_NEXT_DESC_PTR)
#define bfin_read_MDMA_D0_START_ADDR() bfin_read32(MDMA_D0_START_ADDR)
-#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR)
+#define bfin_write_MDMA_D0_START_ADDR(val) bfin_write32(MDMA_D0_START_ADDR, val)
#define bfin_read_MDMA_D0_CONFIG() bfin_read16(MDMA_D0_CONFIG)
#define bfin_write_MDMA_D0_CONFIG(val) bfin_write16(MDMA_D0_CONFIG, val)
#define bfin_read_MDMA_D0_X_COUNT() bfin_read16(MDMA_D0_X_COUNT)
#define bfin_write_MDMA_D0_X_COUNT(val) bfin_write16(MDMA_D0_X_COUNT, val)
#define bfin_read_MDMA_D0_X_MODIFY() bfin_read16(MDMA_D0_X_MODIFY)
-#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY)
+#define bfin_write_MDMA_D0_X_MODIFY(val) bfin_write16(MDMA_D0_X_MODIFY, val)
#define bfin_read_MDMA_D0_Y_COUNT() bfin_read16(MDMA_D0_Y_COUNT)
#define bfin_write_MDMA_D0_Y_COUNT(val) bfin_write16(MDMA_D0_Y_COUNT, val)
#define bfin_read_MDMA_D0_Y_MODIFY() bfin_read16(MDMA_D0_Y_MODIFY)
-#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY)
+#define bfin_write_MDMA_D0_Y_MODIFY(val) bfin_write16(MDMA_D0_Y_MODIFY, val)
#define bfin_read_MDMA_D0_CURR_DESC_PTR() bfin_read32(MDMA_D0_CURR_DESC_PTR)
-#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR)
+#define bfin_write_MDMA_D0_CURR_DESC_PTR(val) bfin_write32(MDMA_D0_CURR_DESC_PTR, val)
#define bfin_read_MDMA_D0_CURR_ADDR() bfin_read32(MDMA_D0_CURR_ADDR)
-#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR)
+#define bfin_write_MDMA_D0_CURR_ADDR(val) bfin_write32(MDMA_D0_CURR_ADDR, val)
#define bfin_read_MDMA_D0_IRQ_STATUS() bfin_read16(MDMA_D0_IRQ_STATUS)
#define bfin_write_MDMA_D0_IRQ_STATUS(val) bfin_write16(MDMA_D0_IRQ_STATUS, val)
#define bfin_read_MDMA_D0_PERIPHERAL_MAP() bfin_read16(MDMA_D0_PERIPHERAL_MAP)
#define bfin_read_MDMA_D0_CURR_Y_COUNT() bfin_read16(MDMA_D0_CURR_Y_COUNT)
#define bfin_write_MDMA_D0_CURR_Y_COUNT(val) bfin_write16(MDMA_D0_CURR_Y_COUNT, val)
#define bfin_read_MDMA_S0_NEXT_DESC_PTR() bfin_read32(MDMA_S0_NEXT_DESC_PTR)
-#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S0_NEXT_DESC_PTR(val) bfin_write32(MDMA_S0_NEXT_DESC_PTR, val)
#define bfin_read_MDMA_S0_START_ADDR() bfin_read32(MDMA_S0_START_ADDR)
-#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR)
+#define bfin_write_MDMA_S0_START_ADDR(val) bfin_write32(MDMA_S0_START_ADDR, val)
#define bfin_read_MDMA_S0_CONFIG() bfin_read16(MDMA_S0_CONFIG)
#define bfin_write_MDMA_S0_CONFIG(val) bfin_write16(MDMA_S0_CONFIG, val)
#define bfin_read_MDMA_S0_X_COUNT() bfin_read16(MDMA_S0_X_COUNT)
#define bfin_write_MDMA_S0_X_COUNT(val) bfin_write16(MDMA_S0_X_COUNT, val)
#define bfin_read_MDMA_S0_X_MODIFY() bfin_read16(MDMA_S0_X_MODIFY)
-#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY)
+#define bfin_write_MDMA_S0_X_MODIFY(val) bfin_write16(MDMA_S0_X_MODIFY, val)
#define bfin_read_MDMA_S0_Y_COUNT() bfin_read16(MDMA_S0_Y_COUNT)
#define bfin_write_MDMA_S0_Y_COUNT(val) bfin_write16(MDMA_S0_Y_COUNT, val)
#define bfin_read_MDMA_S0_Y_MODIFY() bfin_read16(MDMA_S0_Y_MODIFY)
-#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY)
+#define bfin_write_MDMA_S0_Y_MODIFY(val) bfin_write16(MDMA_S0_Y_MODIFY, val)
#define bfin_read_MDMA_S0_CURR_DESC_PTR() bfin_read32(MDMA_S0_CURR_DESC_PTR)
-#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR)
+#define bfin_write_MDMA_S0_CURR_DESC_PTR(val) bfin_write32(MDMA_S0_CURR_DESC_PTR, val)
#define bfin_read_MDMA_S0_CURR_ADDR() bfin_read32(MDMA_S0_CURR_ADDR)
-#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR)
+#define bfin_write_MDMA_S0_CURR_ADDR(val) bfin_write32(MDMA_S0_CURR_ADDR, val)
#define bfin_read_MDMA_S0_IRQ_STATUS() bfin_read16(MDMA_S0_IRQ_STATUS)
#define bfin_write_MDMA_S0_IRQ_STATUS(val) bfin_write16(MDMA_S0_IRQ_STATUS, val)
#define bfin_read_MDMA_S0_PERIPHERAL_MAP() bfin_read16(MDMA_S0_PERIPHERAL_MAP)
/* MDMA Stream 1 Registers */
#define bfin_read_MDMA_D1_NEXT_DESC_PTR() bfin_read32(MDMA_D1_NEXT_DESC_PTR)
-#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_D1_NEXT_DESC_PTR(val) bfin_write32(MDMA_D1_NEXT_DESC_PTR, val)
#define bfin_read_MDMA_D1_START_ADDR() bfin_read32(MDMA_D1_START_ADDR)
-#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR)
+#define bfin_write_MDMA_D1_START_ADDR(val) bfin_write32(MDMA_D1_START_ADDR, val)
#define bfin_read_MDMA_D1_CONFIG() bfin_read16(MDMA_D1_CONFIG)
#define bfin_write_MDMA_D1_CONFIG(val) bfin_write16(MDMA_D1_CONFIG, val)
#define bfin_read_MDMA_D1_X_COUNT() bfin_read16(MDMA_D1_X_COUNT)
#define bfin_read_MDMA_D1_Y_MODIFY() bfin_read16(MDMA_D1_Y_MODIFY)
#define bfin_write_MDMA_D1_Y_MODIFY(val) bfin_write16(MDMA_D1_Y_MODIFY)
#define bfin_read_MDMA_D1_CURR_DESC_PTR() bfin_read32(MDMA_D1_CURR_DESC_PTR)
-#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR)
+#define bfin_write_MDMA_D1_CURR_DESC_PTR(val) bfin_write32(MDMA_D1_CURR_DESC_PTR, val)
#define bfin_read_MDMA_D1_CURR_ADDR() bfin_read32(MDMA_D1_CURR_ADDR)
-#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR)
+#define bfin_write_MDMA_D1_CURR_ADDR(val) bfin_write32(MDMA_D1_CURR_ADDR, val)
#define bfin_read_MDMA_D1_IRQ_STATUS() bfin_read16(MDMA_D1_IRQ_STATUS)
#define bfin_write_MDMA_D1_IRQ_STATUS(val) bfin_write16(MDMA_D1_IRQ_STATUS, val)
#define bfin_read_MDMA_D1_PERIPHERAL_MAP() bfin_read16(MDMA_D1_PERIPHERAL_MAP)
#define bfin_read_MDMA_D1_CURR_Y_COUNT() bfin_read16(MDMA_D1_CURR_Y_COUNT)
#define bfin_write_MDMA_D1_CURR_Y_COUNT(val) bfin_write16(MDMA_D1_CURR_Y_COUNT, val)
#define bfin_read_MDMA_S1_NEXT_DESC_PTR() bfin_read32(MDMA_S1_NEXT_DESC_PTR)
-#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR)
+#define bfin_write_MDMA_S1_NEXT_DESC_PTR(val) bfin_write32(MDMA_S1_NEXT_DESC_PTR, val)
#define bfin_read_MDMA_S1_START_ADDR() bfin_read32(MDMA_S1_START_ADDR)
-#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR)
+#define bfin_write_MDMA_S1_START_ADDR(val) bfin_write32(MDMA_S1_START_ADDR, val)
#define bfin_read_MDMA_S1_CONFIG() bfin_read16(MDMA_S1_CONFIG)
#define bfin_write_MDMA_S1_CONFIG(val) bfin_write16(MDMA_S1_CONFIG, val)
#define bfin_read_MDMA_S1_X_COUNT() bfin_read16(MDMA_S1_X_COUNT)
#define bfin_read_MDMA_S1_Y_MODIFY() bfin_read16(MDMA_S1_Y_MODIFY)
#define bfin_write_MDMA_S1_Y_MODIFY(val) bfin_write16(MDMA_S1_Y_MODIFY)
#define bfin_read_MDMA_S1_CURR_DESC_PTR() bfin_read32(MDMA_S1_CURR_DESC_PTR)
-#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR)
+#define bfin_write_MDMA_S1_CURR_DESC_PTR(val) bfin_write32(MDMA_S1_CURR_DESC_PTR, val)
#define bfin_read_MDMA_S1_CURR_ADDR() bfin_read32(MDMA_S1_CURR_ADDR)
-#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR)
+#define bfin_write_MDMA_S1_CURR_ADDR(val) bfin_write32(MDMA_S1_CURR_ADDR, val)
#define bfin_read_MDMA_S1_IRQ_STATUS() bfin_read16(MDMA_S1_IRQ_STATUS)
#define bfin_write_MDMA_S1_IRQ_STATUS(val) bfin_write16(MDMA_S1_IRQ_STATUS, val)
#define bfin_read_MDMA_S1_PERIPHERAL_MAP() bfin_read16(MDMA_S1_PERIPHERAL_MAP)
/* Bit masks for KPAD_CTL */
#define KPAD_EN 0x1 /* Keypad Enable */
-#define nKPAD_EN 0x0
#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
#define KPAD_COLEN 0xe000 /* Column Enable Width */
/* Bit masks for KPAD_STAT */
#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
-#define nKPAD_IRQ 0x0
#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
#define KPAD_PRESSED 0x8 /* Key press current status */
-#define nKPAD_PRESSED 0x0
/* Bit masks for KPAD_SOFTEVAL */
#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
-#define nKPAD_SOFTEVAL_E 0x0
/* Bit masks for SDH_COMMAND */
#define CMD_IDX 0x3f /* Command Index */
#define CMD_RSP 0x40 /* Response */
-#define nCMD_RSP 0x0
#define CMD_L_RSP 0x80 /* Long Response */
-#define nCMD_L_RSP 0x0
#define CMD_INT_E 0x100 /* Command Interrupt */
-#define nCMD_INT_E 0x0
#define CMD_PEND_E 0x200 /* Command Pending */
-#define nCMD_PEND_E 0x0
#define CMD_E 0x400 /* Command Enable */
-#define nCMD_E 0x0
/* Bit masks for SDH_PWR_CTL */
#define TBD 0x3c /* TBD */
#endif
#define SD_CMD_OD 0x40 /* Open Drain Output */
-#define nSD_CMD_OD 0x0
#define ROD_CTL 0x80 /* Rod Control */
-#define nROD_CTL 0x0
/* Bit masks for SDH_CLK_CTL */
#define CLKDIV 0xff /* MC_CLK Divisor */
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
-#define nCLK_E 0x0
#define PWR_SV_E 0x200 /* Power Save Enable */
-#define nPWR_SV_E 0x0
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
-#define nCLKDIV_BYPASS 0x0
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
-#define nWIDE_BUS 0x0
/* Bit masks for SDH_RESP_CMD */
/* Bit masks for SDH_DATA_CTL */
#define DTX_E 0x1 /* Data Transfer Enable */
-#define nDTX_E 0x0
#define DTX_DIR 0x2 /* Data Transfer Direction */
-#define nDTX_DIR 0x0
#define DTX_MODE 0x4 /* Data Transfer Mode */
-#define nDTX_MODE 0x0
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
-#define nDTX_DMA_E 0x0
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
/* Bit masks for SDH_STATUS */
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
-#define nCMD_CRC_FAIL 0x0
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
-#define nDAT_CRC_FAIL 0x0
#define CMD_TIMEOUT 0x4 /* CMD Time Out */
-#define nCMD_TIMEOUT 0x0
#define DAT_TIMEOUT 0x8 /* Data Time Out */
-#define nDAT_TIMEOUT 0x0
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
-#define nTX_UNDERRUN 0x0
#define RX_OVERRUN 0x20 /* Receive Overrun */
-#define nRX_OVERRUN 0x0
#define CMD_RESP_END 0x40 /* CMD Response End */
-#define nCMD_RESP_END 0x0
#define CMD_SENT 0x80 /* CMD Sent */
-#define nCMD_SENT 0x0
#define DAT_END 0x100 /* Data End */
-#define nDAT_END 0x0
#define START_BIT_ERR 0x200 /* Start Bit Error */
-#define nSTART_BIT_ERR 0x0
#define DAT_BLK_END 0x400 /* Data Block End */
-#define nDAT_BLK_END 0x0
#define CMD_ACT 0x800 /* CMD Active */
-#define nCMD_ACT 0x0
#define TX_ACT 0x1000 /* Transmit Active */
-#define nTX_ACT 0x0
#define RX_ACT 0x2000 /* Receive Active */
-#define nRX_ACT 0x0
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
-#define nTX_FIFO_STAT 0x0
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
-#define nRX_FIFO_STAT 0x0
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
-#define nTX_FIFO_FULL 0x0
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
-#define nRX_FIFO_FULL 0x0
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
-#define nTX_FIFO_ZERO 0x0
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
-#define nRX_DAT_ZERO 0x0
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
-#define nTX_DAT_RDY 0x0
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
-#define nRX_FIFO_RDY 0x0
/* Bit masks for SDH_STATUS_CLR */
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
-#define nCMD_CRC_FAIL_STAT 0x0
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
-#define nDAT_CRC_FAIL_STAT 0x0
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
-#define nCMD_TIMEOUT_STAT 0x0
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
-#define nDAT_TIMEOUT_STAT 0x0
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
-#define nTX_UNDERRUN_STAT 0x0
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
-#define nRX_OVERRUN_STAT 0x0
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
-#define nCMD_RESP_END_STAT 0x0
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
-#define nCMD_SENT_STAT 0x0
#define DAT_END_STAT 0x100 /* Data End Status */
-#define nDAT_END_STAT 0x0
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
-#define nSTART_BIT_ERR_STAT 0x0
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
-#define nDAT_BLK_END_STAT 0x0
/* Bit masks for SDH_MASK0 */
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
-#define nCMD_CRC_FAIL_MASK 0x0
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
-#define nDAT_CRC_FAIL_MASK 0x0
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
-#define nCMD_TIMEOUT_MASK 0x0
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
-#define nDAT_TIMEOUT_MASK 0x0
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
-#define nTX_UNDERRUN_MASK 0x0
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
-#define nRX_OVERRUN_MASK 0x0
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
-#define nCMD_RESP_END_MASK 0x0
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
-#define nCMD_SENT_MASK 0x0
#define DAT_END_MASK 0x100 /* Data End Mask */
-#define nDAT_END_MASK 0x0
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
-#define nSTART_BIT_ERR_MASK 0x0
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
-#define nDAT_BLK_END_MASK 0x0
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
-#define nCMD_ACT_MASK 0x0
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
-#define nTX_ACT_MASK 0x0
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
-#define nRX_ACT_MASK 0x0
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
-#define nTX_FIFO_STAT_MASK 0x0
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
-#define nRX_FIFO_STAT_MASK 0x0
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
-#define nTX_FIFO_FULL_MASK 0x0
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
-#define nRX_FIFO_FULL_MASK 0x0
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
-#define nTX_FIFO_ZERO_MASK 0x0
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
-#define nRX_DAT_ZERO_MASK 0x0
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
-#define nTX_DAT_RDY_MASK 0x0
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
-#define nRX_FIFO_RDY_MASK 0x0
/* Bit masks for SDH_FIFO_CNT */
/* Bit masks for SDH_E_STATUS */
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
-#define nSDIO_INT_DET 0x0
#define SD_CARD_DET 0x10 /* SD Card Detect */
-#define nSD_CARD_DET 0x0
/* Bit masks for SDH_E_MASK */
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
-#define nSDIO_MSK 0x0
#define SCD_MSK 0x40 /* Mask Card Detect */
-#define nSCD_MSK 0x0
/* Bit masks for SDH_CFG */
#define CLKS_EN 0x1 /* Clocks Enable */
-#define nCLKS_EN 0x0
#define SD4E 0x4 /* SDIO 4-Bit Enable */
-#define nSD4E 0x0
#define MWE 0x8 /* Moving Window Enable */
-#define nMWE 0x0
#define SD_RST 0x10 /* SDMMC Reset */
-#define nSD_RST 0x0
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
-#define nPUP_SDDAT 0x0
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
-#define nPUP_SDDAT3 0x0
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
-#define nPD_SDDAT3 0x0
/* Bit masks for SDH_RD_WAIT_EN */
#define RWR 0x1 /* Read Wait Request */
-#define nRWR 0x0
/* Bit masks for ATAPI_CONTROL */
#define PIO_START 0x1 /* Start PIO/Reg Op */
-#define nPIO_START 0x0
#define MULTI_START 0x2 /* Start Multi-DMA Op */
-#define nMULTI_START 0x0
#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
-#define nULTRA_START 0x0
#define XFER_DIR 0x8 /* Transfer Direction */
-#define nXFER_DIR 0x0
#define IORDY_EN 0x10 /* IORDY Enable */
-#define nIORDY_EN 0x0
#define FIFO_FLUSH 0x20 /* Flush FIFOs */
-#define nFIFO_FLUSH 0x0
#define SOFT_RST 0x40 /* Soft Reset */
-#define nSOFT_RST 0x0
#define DEV_RST 0x80 /* Device Reset */
-#define nDEV_RST 0x0
#define TFRCNT_RST 0x100 /* Trans Count Reset */
-#define nTFRCNT_RST 0x0
#define END_ON_TERM 0x200 /* End/Terminate Select */
-#define nEND_ON_TERM 0x0
#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
-#define nPIO_USE_DMA 0x0
#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
/* Bit masks for ATAPI_STATUS */
#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
-#define nPIO_XFER_ON 0x0
#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
-#define nMULTI_XFER_ON 0x0
#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
-#define nULTRA_XFER_ON 0x0
#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
/* Bit masks for ATAPI_DEV_ADDR */
/* Bit masks for ATAPI_INT_MASK */
#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
-#define nATAPI_DEV_INT_MASK 0x0
#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
-#define nPIO_DONE_MASK 0x0
#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
-#define nMULTI_DONE_MASK 0x0
#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
-#define nUDMAIN_DONE_MASK 0x0
#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
-#define nUDMAOUT_DONE_MASK 0x0
#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
-#define nHOST_TERM_XFER_MASK 0x0
#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
-#define nMULTI_TERM_MASK 0x0
#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define nUDMAIN_TERM_MASK 0x0
#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
-#define nUDMAOUT_TERM_MASK 0x0
/* Bit masks for ATAPI_INT_STATUS */
#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
-#define nATAPI_DEV_INT 0x0
#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
-#define nPIO_DONE_INT 0x0
#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
-#define nMULTI_DONE_INT 0x0
#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
-#define nUDMAIN_DONE_INT 0x0
#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
-#define nUDMAOUT_DONE_INT 0x0
#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
-#define nHOST_TERM_XFER_INT 0x0
#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
-#define nMULTI_TERM_INT 0x0
#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define nUDMAIN_TERM_INT 0x0
#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
-#define nUDMAOUT_TERM_INT 0x0
/* Bit masks for ATAPI_LINE_STATUS */
#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
-#define nATAPI_INTR 0x0
#define ATAPI_DASP 0x2 /* Device dasp to host line status */
-#define nATAPI_DASP 0x0
#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
-#define nATAPI_CS0N 0x0
#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
-#define nATAPI_CS1N 0x0
#define ATAPI_ADDR 0x70 /* ATAPI address line status */
#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
-#define nATAPI_DMAREQ 0x0
#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
-#define nATAPI_DMAACKN 0x0
#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
-#define nATAPI_DIOWN 0x0
#define ATAPI_DIORN 0x400 /* ATAPI read line status */
-#define nATAPI_DIORN 0x0
#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
-#define nATAPI_IORDY 0x0
/* Bit masks for ATAPI_SM_STATE */
/* Bit masks for ATAPI_TERMINATE */
#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
-#define nATAPI_HOST_TERM 0x0
/* Bit masks for ATAPI_REG_TIM_0 */
/* Bit masks for USB_POWER */
#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
-#define nENABLE_SUSPENDM 0x0
#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
-#define nSUSPEND_MODE 0x0
#define RESUME_MODE 0x4 /* DMA Mode */
-#define nRESUME_MODE 0x0
#define RESET 0x8 /* Reset indicator */
-#define nRESET 0x0
#define HS_MODE 0x10 /* High Speed mode indicator */
-#define nHS_MODE 0x0
#define HS_ENABLE 0x20 /* high Speed Enable */
-#define nHS_ENABLE 0x0
#define SOFT_CONN 0x40 /* Soft connect */
-#define nSOFT_CONN 0x0
#define ISO_UPDATE 0x80 /* Isochronous update */
-#define nISO_UPDATE 0x0
/* Bit masks for USB_INTRTX */
#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
-#define nEP0_TX 0x0
#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
-#define nEP1_TX 0x0
#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
-#define nEP2_TX 0x0
#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
-#define nEP3_TX 0x0
#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
-#define nEP4_TX 0x0
#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
-#define nEP5_TX 0x0
#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
-#define nEP6_TX 0x0
#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
-#define nEP7_TX 0x0
/* Bit masks for USB_INTRRX */
#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
-#define nEP1_RX 0x0
#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
-#define nEP2_RX 0x0
#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
-#define nEP3_RX 0x0
#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
-#define nEP4_RX 0x0
#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
-#define nEP5_RX 0x0
#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
-#define nEP6_RX 0x0
#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
-#define nEP7_RX 0x0
/* Bit masks for USB_INTRTXE */
#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
-#define nEP0_TX_E 0x0
#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
-#define nEP1_TX_E 0x0
#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
-#define nEP2_TX_E 0x0
#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
-#define nEP3_TX_E 0x0
#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
-#define nEP4_TX_E 0x0
#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
-#define nEP5_TX_E 0x0
#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
-#define nEP6_TX_E 0x0
#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
-#define nEP7_TX_E 0x0
/* Bit masks for USB_INTRRXE */
#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
-#define nEP1_RX_E 0x0
#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
-#define nEP2_RX_E 0x0
#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
-#define nEP3_RX_E 0x0
#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
-#define nEP4_RX_E 0x0
#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
-#define nEP5_RX_E 0x0
#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
-#define nEP6_RX_E 0x0
#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
-#define nEP7_RX_E 0x0
/* Bit masks for USB_INTRUSB */
#define SUSPEND_B 0x1 /* Suspend indicator */
-#define nSUSPEND_B 0x0
#define RESUME_B 0x2 /* Resume indicator */
-#define nRESUME_B 0x0
#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
-#define nRESET_OR_BABLE_B 0x0
#define SOF_B 0x8 /* Start of frame */
-#define nSOF_B 0x0
#define CONN_B 0x10 /* Connection indicator */
-#define nCONN_B 0x0
#define DISCON_B 0x20 /* Disconnect indicator */
-#define nDISCON_B 0x0
#define SESSION_REQ_B 0x40 /* Session Request */
-#define nSESSION_REQ_B 0x0
#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
-#define nVBUS_ERROR_B 0x0
/* Bit masks for USB_INTRUSBE */
#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
-#define nSUSPEND_BE 0x0
#define RESUME_BE 0x2 /* Resume indicator int enable */
-#define nRESUME_BE 0x0
#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
-#define nRESET_OR_BABLE_BE 0x0
#define SOF_BE 0x8 /* Start of frame int enable */
-#define nSOF_BE 0x0
#define CONN_BE 0x10 /* Connection indicator int enable */
-#define nCONN_BE 0x0
#define DISCON_BE 0x20 /* Disconnect indicator int enable */
-#define nDISCON_BE 0x0
#define SESSION_REQ_BE 0x40 /* Session Request int enable */
-#define nSESSION_REQ_BE 0x0
#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
-#define nVBUS_ERROR_BE 0x0
/* Bit masks for USB_FRAME */
/* Bit masks for USB_GLOBAL_CTL */
#define GLOBAL_ENA 0x1 /* enables USB module */
-#define nGLOBAL_ENA 0x0
#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
-#define nEP1_TX_ENA 0x0
#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
-#define nEP2_TX_ENA 0x0
#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
-#define nEP3_TX_ENA 0x0
#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
-#define nEP4_TX_ENA 0x0
#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
-#define nEP5_TX_ENA 0x0
#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
-#define nEP6_TX_ENA 0x0
#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
-#define nEP7_TX_ENA 0x0
#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
-#define nEP1_RX_ENA 0x0
#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
-#define nEP2_RX_ENA 0x0
#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
-#define nEP3_RX_ENA 0x0
#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
-#define nEP4_RX_ENA 0x0
#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
-#define nEP5_RX_ENA 0x0
#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
-#define nEP6_RX_ENA 0x0
#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
-#define nEP7_RX_ENA 0x0
/* Bit masks for USB_OTG_DEV_CTL */
#define SESSION 0x1 /* session indicator */
-#define nSESSION 0x0
#define HOST_REQ 0x2 /* Host negotiation request */
-#define nHOST_REQ 0x0
#define HOST_MODE 0x4 /* indicates USBDRC is a host */
-#define nHOST_MODE 0x0
#define VBUS0 0x8 /* Vbus level indicator[0] */
-#define nVBUS0 0x0
#define VBUS1 0x10 /* Vbus level indicator[1] */
-#define nVBUS1 0x0
#define LSDEV 0x20 /* Low-speed indicator */
-#define nLSDEV 0x0
#define FSDEV 0x40 /* Full or High-speed indicator */
-#define nFSDEV 0x0
#define B_DEVICE 0x80 /* A' or 'B' device indicator */
-#define nB_DEVICE 0x0
/* Bit masks for USB_OTG_VBUS_IRQ */
#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
-#define nDRIVE_VBUS_ON 0x0
#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
-#define nDRIVE_VBUS_OFF 0x0
#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
-#define nCHRG_VBUS_START 0x0
#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
-#define nCHRG_VBUS_END 0x0
#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
-#define nDISCHRG_VBUS_START 0x0
#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
-#define nDISCHRG_VBUS_END 0x0
/* Bit masks for USB_OTG_VBUS_MASK */
#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
-#define nDRIVE_VBUS_ON_ENA 0x0
#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
-#define nDRIVE_VBUS_OFF_ENA 0x0
#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
-#define nCHRG_VBUS_START_ENA 0x0
#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
-#define nCHRG_VBUS_END_ENA 0x0
#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
-#define nDISCHRG_VBUS_START_ENA 0x0
#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
-#define nDISCHRG_VBUS_END_ENA 0x0
/* Bit masks for USB_CSR0 */
#define RXPKTRDY 0x1 /* data packet receive indicator */
-#define nRXPKTRDY 0x0
#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
-#define nTXPKTRDY 0x0
#define STALL_SENT 0x4 /* STALL handshake sent */
-#define nSTALL_SENT 0x0
#define DATAEND 0x8 /* Data end indicator */
-#define nDATAEND 0x0
#define SETUPEND 0x10 /* Setup end */
-#define nSETUPEND 0x0
#define SENDSTALL 0x20 /* Send STALL handshake */
-#define nSENDSTALL 0x0
#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
-#define nSERVICED_RXPKTRDY 0x0
#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
-#define nSERVICED_SETUPEND 0x0
#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
-#define nFLUSHFIFO 0x0
#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
-#define nSTALL_RECEIVED_H 0x0
#define SETUPPKT_H 0x8 /* send Setup token host mode */
-#define nSETUPPKT_H 0x0
#define ERROR_H 0x10 /* timeout error indicator host mode */
-#define nERROR_H 0x0
#define REQPKT_H 0x20 /* Request an IN transaction host mode */
-#define nREQPKT_H 0x0
#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
-#define nSTATUSPKT_H 0x0
#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
-#define nNAK_TIMEOUT_H 0x0
/* Bit masks for USB_COUNT0 */
/* Bit masks for USB_TXCSR */
#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
-#define nTXPKTRDY_T 0x0
#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
-#define nFIFO_NOT_EMPTY_T 0x0
#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
-#define nUNDERRUN_T 0x0
#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
-#define nFLUSHFIFO_T 0x0
#define STALL_SEND_T 0x10 /* issue a Stall handshake */
-#define nSTALL_SEND_T 0x0
#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
-#define nSTALL_SENT_T 0x0
#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_T 0x0
#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
-#define nINCOMPTX_T 0x0
#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_T 0x0
#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
-#define nFORCE_DATATOGGLE_T 0x0
#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_T 0x0
#define ISO_T 0x4000 /* enable Isochronous transfers */
-#define nISO_T 0x0
#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOSET_T 0x0
#define ERROR_TH 0x4 /* error condition host mode */
-#define nERROR_TH 0x0
#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_TH 0x0
#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
-#define nNAK_TIMEOUT_TH 0x0
/* Bit masks for USB_TXCOUNT */
/* Bit masks for USB_RXCSR */
#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
-#define nRXPKTRDY_R 0x0
#define FIFO_FULL_R 0x2 /* FIFO not empty */
-#define nFIFO_FULL_R 0x0
#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
-#define nOVERRUN_R 0x0
#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
-#define nDATAERROR_R 0x0
#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
-#define nFLUSHFIFO_R 0x0
#define STALL_SEND_R 0x20 /* issue a Stall handshake */
-#define nSTALL_SEND_R 0x0
#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
-#define nSTALL_SENT_R 0x0
#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_R 0x0
#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
-#define nINCOMPRX_R 0x0
#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_R 0x0
#define DISNYET_R 0x1000 /* disable Nyet handshakes */
-#define nDISNYET_R 0x0
#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_R 0x0
#define ISO_R 0x4000 /* enable Isochronous transfers */
-#define nISO_R 0x0
#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOCLEAR_R 0x0
#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
-#define nERROR_RH 0x0
#define REQPKT_RH 0x20 /* request an IN transaction host mode */
-#define nREQPKT_RH 0x0
#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_RH 0x0
#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
-#define nINCOMPRX_RH 0x0
#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
-#define nDMAREQMODE_RH 0x0
#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
-#define nAUTOREQ_RH 0x0
/* Bit masks for USB_RXCOUNT */
/* Bit masks for USB_DMA_INTERRUPT */
#define DMA0_INT 0x1 /* DMA0 pending interrupt */
-#define nDMA0_INT 0x0
#define DMA1_INT 0x2 /* DMA1 pending interrupt */
-#define nDMA1_INT 0x0
#define DMA2_INT 0x4 /* DMA2 pending interrupt */
-#define nDMA2_INT 0x0
#define DMA3_INT 0x8 /* DMA3 pending interrupt */
-#define nDMA3_INT 0x0
#define DMA4_INT 0x10 /* DMA4 pending interrupt */
-#define nDMA4_INT 0x0
#define DMA5_INT 0x20 /* DMA5 pending interrupt */
-#define nDMA5_INT 0x0
#define DMA6_INT 0x40 /* DMA6 pending interrupt */
-#define nDMA6_INT 0x0
#define DMA7_INT 0x80 /* DMA7 pending interrupt */
-#define nDMA7_INT 0x0
/* Bit masks for USB_DMAxCONTROL */
#define DMA_ENA 0x1 /* DMA enable */
-#define nDMA_ENA 0x0
#define DIRECTION 0x2 /* direction of DMA transfer */
-#define nDIRECTION 0x0
#define MODE 0x4 /* DMA Bus error */
-#define nMODE 0x0
#define INT_ENA 0x8 /* Interrupt enable */
-#define nINT_ENA 0x0
#define EPNUM 0xf0 /* EP number */
#define BUSERROR 0x100 /* DMA Bus error */
-#define nBUSERROR 0x0
/* Bit masks for USB_DMAxADDRHIGH */
/* Bit masks for PIXC_CTL */
#define PIXC_EN 0x1 /* Pixel Compositor Enable */
-#define nPIXC_EN 0x0
#define OVR_A_EN 0x2 /* Overlay A Enable */
-#define nOVR_A_EN 0x0
#define OVR_B_EN 0x4 /* Overlay B Enable */
-#define nOVR_B_EN 0x0
#define IMG_FORM 0x8 /* Image Data Format */
-#define nIMG_FORM 0x0
#define OVR_FORM 0x10 /* Overlay Data Format */
-#define nOVR_FORM 0x0
#define OUT_FORM 0x20 /* Output Data Format */
-#define nOUT_FORM 0x0
#define UDS_MOD 0x40 /* Resampling Mode */
-#define nUDS_MOD 0x0
#define TC_EN 0x80 /* Transparent Color Enable */
-#define nTC_EN 0x0
#define IMG_STAT 0x300 /* Image FIFO Status */
#define OVR_STAT 0xc00 /* Overlay FIFO Status */
#define WM_LVL 0x3000 /* FIFO Watermark Level */
/* Bit masks for PIXC_INTRSTAT */
#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
-#define nOVR_INT_EN 0x0
#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
-#define nFRM_INT_EN 0x0
#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
-#define nOVR_INT_STAT 0x0
#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
-#define nFRM_INT_STAT 0x0
/* Bit masks for PIXC_RYCON */
#define A12 0xffc00 /* A12 in the Coefficient Matrix */
#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
-#define nRY_MULT4 0x0
/* Bit masks for PIXC_GUCON */
#define A22 0xffc00 /* A22 in the Coefficient Matrix */
#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
-#define nGU_MULT4 0x0
/* Bit masks for PIXC_BVCON */
#define A32 0xffc00 /* A32 in the Coefficient Matrix */
#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
-#define nBV_MULT4 0x0
/* Bit masks for PIXC_CCBIAS */
/* Bit masks for HOST_CONTROL */
#define HOST_EN 0x1 /* Host Enable */
-#define nHOST_EN 0x0
#define HOST_END 0x2 /* Host Endianess */
-#define nHOST_END 0x0
#define DATA_SIZE 0x4 /* Data Size */
-#define nDATA_SIZE 0x0
#define HOST_RST 0x8 /* Host Reset */
-#define nHOST_RST 0x0
#define HRDY_OVR 0x20 /* Host Ready Override */
-#define nHRDY_OVR 0x0
#define INT_MODE 0x40 /* Interrupt Mode */
-#define nINT_MODE 0x0
#define BT_EN 0x80 /* Bus Timeout Enable */
-#define nBT_EN 0x0
#define EHW 0x100 /* Enable Host Write */
-#define nEHW 0x0
#define EHR 0x200 /* Enable Host Read */
-#define nEHR 0x0
#define BDR 0x400 /* Burst DMA Requests */
-#define nBDR 0x0
/* Bit masks for HOST_STATUS */
#define READY 0x1 /* DMA Ready */
-#define nREADY 0x0
#define FIFOFULL 0x2 /* FIFO Full */
-#define nFIFOFULL 0x0
#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define nFIFOEMPTY 0x0
#define COMPLETE 0x8 /* DMA Complete */
-#define nCOMPLETE 0x0
#define HSHK 0x10 /* Host Handshake */
-#define nHSHK 0x0
#define TIMEOUT 0x20 /* Host Timeout */
-#define nTIMEOUT 0x0
#define HIRQ 0x40 /* Host Interrupt Request */
-#define nHIRQ 0x0
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define nALLOW_CNFG 0x0
#define DMA_DIR 0x100 /* DMA Direction */
-#define nDMA_DIR 0x0
#define BTE 0x200 /* Bus Timeout Enabled */
-#define nBTE 0x0
/* Bit masks for HOST_TIMEOUT */
/* Bit masks for TIMER_ENABLE1 */
#define TIMEN8 0x1 /* Timer 8 Enable */
-#define nTIMEN8 0x0
#define TIMEN9 0x2 /* Timer 9 Enable */
-#define nTIMEN9 0x0
#define TIMEN10 0x4 /* Timer 10 Enable */
-#define nTIMEN10 0x0
/* Bit masks for TIMER_DISABLE1 */
#define TIMDIS8 0x1 /* Timer 8 Disable */
-#define nTIMDIS8 0x0
#define TIMDIS9 0x2 /* Timer 9 Disable */
-#define nTIMDIS9 0x0
#define TIMDIS10 0x4 /* Timer 10 Disable */
-#define nTIMDIS10 0x0
/* Bit masks for TIMER_STATUS1 */
#define TIMIL8 0x1 /* Timer 8 Interrupt */
-#define nTIMIL8 0x0
#define TIMIL9 0x2 /* Timer 9 Interrupt */
-#define nTIMIL9 0x0
#define TIMIL10 0x4 /* Timer 10 Interrupt */
-#define nTIMIL10 0x0
#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
-#define nTOVF_ERR8 0x0
#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
-#define nTOVF_ERR9 0x0
#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
-#define nTOVF_ERR10 0x0
#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
-#define nTRUN8 0x0
#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
-#define nTRUN9 0x0
#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
-#define nTRUN10 0x0
/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
/* Bit masks for HMDMAx_CONTROL */
#define HMDMAEN 0x1 /* Handshake MDMA Enable */
-#define nHMDMAEN 0x0
#define REP 0x2 /* Handshake MDMA Request Polarity */
-#define nREP 0x0
#define UTE 0x8 /* Urgency Threshold Enable */
-#define nUTE 0x0
#define OIE 0x10 /* Overflow Interrupt Enable */
-#define nOIE 0x0
#define BDIE 0x20 /* Block Done Interrupt Enable */
-#define nBDIE 0x0
#define MBDI 0x40 /* Mask Block Done Interrupt */
-#define nMBDI 0x0
#define DRQ 0x300 /* Handshake MDMA Request Type */
#define RBC 0x1000 /* Force Reload of BCOUNT */
-#define nRBC 0x0
#define PS 0x2000 /* Pin Status */
-#define nPS 0x0
#define OI 0x4000 /* Overflow Interrupt Generated */
-#define nOI 0x0
#define BDI 0x8000 /* Block Done Interrupt Generated */
-#define nBDI 0x0
/* ******************************************* */
/* MULTI BIT MACRO ENUMERATIONS */
/* Bit masks for PIXC_CTL */
#define PIXC_EN 0x1 /* Pixel Compositor Enable */
-#define nPIXC_EN 0x0
#define OVR_A_EN 0x2 /* Overlay A Enable */
-#define nOVR_A_EN 0x0
#define OVR_B_EN 0x4 /* Overlay B Enable */
-#define nOVR_B_EN 0x0
#define IMG_FORM 0x8 /* Image Data Format */
-#define nIMG_FORM 0x0
#define OVR_FORM 0x10 /* Overlay Data Format */
-#define nOVR_FORM 0x0
#define OUT_FORM 0x20 /* Output Data Format */
-#define nOUT_FORM 0x0
#define UDS_MOD 0x40 /* Resampling Mode */
-#define nUDS_MOD 0x0
#define TC_EN 0x80 /* Transparent Color Enable */
-#define nTC_EN 0x0
#define IMG_STAT 0x300 /* Image FIFO Status */
#define OVR_STAT 0xc00 /* Overlay FIFO Status */
#define WM_LVL 0x3000 /* FIFO Watermark Level */
/* Bit masks for PIXC_INTRSTAT */
#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
-#define nOVR_INT_EN 0x0
#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
-#define nFRM_INT_EN 0x0
#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
-#define nOVR_INT_STAT 0x0
#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
-#define nFRM_INT_STAT 0x0
/* Bit masks for PIXC_RYCON */
#define A12 0xffc00 /* A12 in the Coefficient Matrix */
#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
-#define nRY_MULT4 0x0
/* Bit masks for PIXC_GUCON */
#define A22 0xffc00 /* A22 in the Coefficient Matrix */
#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
-#define nGU_MULT4 0x0
/* Bit masks for PIXC_BVCON */
#define A32 0xffc00 /* A32 in the Coefficient Matrix */
#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
-#define nBV_MULT4 0x0
/* Bit masks for PIXC_CCBIAS */
/* Bit masks for HOST_CONTROL */
#define HOST_EN 0x1 /* Host Enable */
-#define nHOST_EN 0x0
#define HOST_END 0x2 /* Host Endianess */
-#define nHOST_END 0x0
#define DATA_SIZE 0x4 /* Data Size */
-#define nDATA_SIZE 0x0
#define HOST_RST 0x8 /* Host Reset */
-#define nHOST_RST 0x0
#define HRDY_OVR 0x20 /* Host Ready Override */
-#define nHRDY_OVR 0x0
#define INT_MODE 0x40 /* Interrupt Mode */
-#define nINT_MODE 0x0
#define BT_EN 0x80 /* Bus Timeout Enable */
-#define nBT_EN 0x0
#define EHW 0x100 /* Enable Host Write */
-#define nEHW 0x0
#define EHR 0x200 /* Enable Host Read */
-#define nEHR 0x0
#define BDR 0x400 /* Burst DMA Requests */
-#define nBDR 0x0
/* Bit masks for HOST_STATUS */
#define READY 0x1 /* DMA Ready */
-#define nREADY 0x0
#define FIFOFULL 0x2 /* FIFO Full */
-#define nFIFOFULL 0x0
#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define nFIFOEMPTY 0x0
#define COMPLETE 0x8 /* DMA Complete */
-#define nCOMPLETE 0x0
#define HSHK 0x10 /* Host Handshake */
-#define nHSHK 0x0
#define TIMEOUT 0x20 /* Host Timeout */
-#define nTIMEOUT 0x0
#define HIRQ 0x40 /* Host Interrupt Request */
-#define nHIRQ 0x0
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define nALLOW_CNFG 0x0
#define DMA_DIR 0x100 /* DMA Direction */
-#define nDMA_DIR 0x0
#define BTE 0x200 /* Bus Timeout Enabled */
-#define nBTE 0x0
/* Bit masks for HOST_TIMEOUT */
/* Bit masks for KPAD_CTL */
#define KPAD_EN 0x1 /* Keypad Enable */
-#define nKPAD_EN 0x0
#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
#define KPAD_COLEN 0xe000 /* Column Enable Width */
/* Bit masks for KPAD_STAT */
#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
-#define nKPAD_IRQ 0x0
#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
#define KPAD_PRESSED 0x8 /* Key press current status */
-#define nKPAD_PRESSED 0x0
/* Bit masks for KPAD_SOFTEVAL */
#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
-#define nKPAD_SOFTEVAL_E 0x0
/* Bit masks for SDH_COMMAND */
#define CMD_IDX 0x3f /* Command Index */
#define CMD_RSP 0x40 /* Response */
-#define nCMD_RSP 0x0
#define CMD_L_RSP 0x80 /* Long Response */
-#define nCMD_L_RSP 0x0
#define CMD_INT_E 0x100 /* Command Interrupt */
-#define nCMD_INT_E 0x0
#define CMD_PEND_E 0x200 /* Command Pending */
-#define nCMD_PEND_E 0x0
#define CMD_E 0x400 /* Command Enable */
-#define nCMD_E 0x0
/* Bit masks for SDH_PWR_CTL */
#define TBD 0x3c /* TBD */
#endif
#define SD_CMD_OD 0x40 /* Open Drain Output */
-#define nSD_CMD_OD 0x0
#define ROD_CTL 0x80 /* Rod Control */
-#define nROD_CTL 0x0
/* Bit masks for SDH_CLK_CTL */
#define CLKDIV 0xff /* MC_CLK Divisor */
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
-#define nCLK_E 0x0
#define PWR_SV_E 0x200 /* Power Save Enable */
-#define nPWR_SV_E 0x0
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
-#define nCLKDIV_BYPASS 0x0
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
-#define nWIDE_BUS 0x0
/* Bit masks for SDH_RESP_CMD */
/* Bit masks for SDH_DATA_CTL */
#define DTX_E 0x1 /* Data Transfer Enable */
-#define nDTX_E 0x0
#define DTX_DIR 0x2 /* Data Transfer Direction */
-#define nDTX_DIR 0x0
#define DTX_MODE 0x4 /* Data Transfer Mode */
-#define nDTX_MODE 0x0
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
-#define nDTX_DMA_E 0x0
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
/* Bit masks for SDH_STATUS */
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
-#define nCMD_CRC_FAIL 0x0
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
-#define nDAT_CRC_FAIL 0x0
#define CMD_TIMEOUT 0x4 /* CMD Time Out */
-#define nCMD_TIMEOUT 0x0
#define DAT_TIMEOUT 0x8 /* Data Time Out */
-#define nDAT_TIMEOUT 0x0
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
-#define nTX_UNDERRUN 0x0
#define RX_OVERRUN 0x20 /* Receive Overrun */
-#define nRX_OVERRUN 0x0
#define CMD_RESP_END 0x40 /* CMD Response End */
-#define nCMD_RESP_END 0x0
#define CMD_SENT 0x80 /* CMD Sent */
-#define nCMD_SENT 0x0
#define DAT_END 0x100 /* Data End */
-#define nDAT_END 0x0
#define START_BIT_ERR 0x200 /* Start Bit Error */
-#define nSTART_BIT_ERR 0x0
#define DAT_BLK_END 0x400 /* Data Block End */
-#define nDAT_BLK_END 0x0
#define CMD_ACT 0x800 /* CMD Active */
-#define nCMD_ACT 0x0
#define TX_ACT 0x1000 /* Transmit Active */
-#define nTX_ACT 0x0
#define RX_ACT 0x2000 /* Receive Active */
-#define nRX_ACT 0x0
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
-#define nTX_FIFO_STAT 0x0
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
-#define nRX_FIFO_STAT 0x0
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
-#define nTX_FIFO_FULL 0x0
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
-#define nRX_FIFO_FULL 0x0
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
-#define nTX_FIFO_ZERO 0x0
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
-#define nRX_DAT_ZERO 0x0
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
-#define nTX_DAT_RDY 0x0
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
-#define nRX_FIFO_RDY 0x0
/* Bit masks for SDH_STATUS_CLR */
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
-#define nCMD_CRC_FAIL_STAT 0x0
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
-#define nDAT_CRC_FAIL_STAT 0x0
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
-#define nCMD_TIMEOUT_STAT 0x0
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
-#define nDAT_TIMEOUT_STAT 0x0
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
-#define nTX_UNDERRUN_STAT 0x0
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
-#define nRX_OVERRUN_STAT 0x0
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
-#define nCMD_RESP_END_STAT 0x0
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
-#define nCMD_SENT_STAT 0x0
#define DAT_END_STAT 0x100 /* Data End Status */
-#define nDAT_END_STAT 0x0
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
-#define nSTART_BIT_ERR_STAT 0x0
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
-#define nDAT_BLK_END_STAT 0x0
/* Bit masks for SDH_MASK0 */
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
-#define nCMD_CRC_FAIL_MASK 0x0
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
-#define nDAT_CRC_FAIL_MASK 0x0
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
-#define nCMD_TIMEOUT_MASK 0x0
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
-#define nDAT_TIMEOUT_MASK 0x0
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
-#define nTX_UNDERRUN_MASK 0x0
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
-#define nRX_OVERRUN_MASK 0x0
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
-#define nCMD_RESP_END_MASK 0x0
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
-#define nCMD_SENT_MASK 0x0
#define DAT_END_MASK 0x100 /* Data End Mask */
-#define nDAT_END_MASK 0x0
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
-#define nSTART_BIT_ERR_MASK 0x0
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
-#define nDAT_BLK_END_MASK 0x0
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
-#define nCMD_ACT_MASK 0x0
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
-#define nTX_ACT_MASK 0x0
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
-#define nRX_ACT_MASK 0x0
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
-#define nTX_FIFO_STAT_MASK 0x0
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
-#define nRX_FIFO_STAT_MASK 0x0
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
-#define nTX_FIFO_FULL_MASK 0x0
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
-#define nRX_FIFO_FULL_MASK 0x0
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
-#define nTX_FIFO_ZERO_MASK 0x0
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
-#define nRX_DAT_ZERO_MASK 0x0
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
-#define nTX_DAT_RDY_MASK 0x0
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
-#define nRX_FIFO_RDY_MASK 0x0
/* Bit masks for SDH_FIFO_CNT */
/* Bit masks for SDH_E_STATUS */
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
-#define nSDIO_INT_DET 0x0
#define SD_CARD_DET 0x10 /* SD Card Detect */
-#define nSD_CARD_DET 0x0
/* Bit masks for SDH_E_MASK */
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
-#define nSDIO_MSK 0x0
#define SCD_MSK 0x40 /* Mask Card Detect */
-#define nSCD_MSK 0x0
/* Bit masks for SDH_CFG */
#define CLKS_EN 0x1 /* Clocks Enable */
-#define nCLKS_EN 0x0
#define SD4E 0x4 /* SDIO 4-Bit Enable */
-#define nSD4E 0x0
#define MWE 0x8 /* Moving Window Enable */
-#define nMWE 0x0
#define SD_RST 0x10 /* SDMMC Reset */
-#define nSD_RST 0x0
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
-#define nPUP_SDDAT 0x0
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
-#define nPUP_SDDAT3 0x0
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
-#define nPD_SDDAT3 0x0
/* Bit masks for SDH_RD_WAIT_EN */
#define RWR 0x1 /* Read Wait Request */
-#define nRWR 0x0
/* Bit masks for ATAPI_CONTROL */
#define PIO_START 0x1 /* Start PIO/Reg Op */
-#define nPIO_START 0x0
#define MULTI_START 0x2 /* Start Multi-DMA Op */
-#define nMULTI_START 0x0
#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
-#define nULTRA_START 0x0
#define XFER_DIR 0x8 /* Transfer Direction */
-#define nXFER_DIR 0x0
#define IORDY_EN 0x10 /* IORDY Enable */
-#define nIORDY_EN 0x0
#define FIFO_FLUSH 0x20 /* Flush FIFOs */
-#define nFIFO_FLUSH 0x0
#define SOFT_RST 0x40 /* Soft Reset */
-#define nSOFT_RST 0x0
#define DEV_RST 0x80 /* Device Reset */
-#define nDEV_RST 0x0
#define TFRCNT_RST 0x100 /* Trans Count Reset */
-#define nTFRCNT_RST 0x0
#define END_ON_TERM 0x200 /* End/Terminate Select */
-#define nEND_ON_TERM 0x0
#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
-#define nPIO_USE_DMA 0x0
#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
/* Bit masks for ATAPI_STATUS */
#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
-#define nPIO_XFER_ON 0x0
#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
-#define nMULTI_XFER_ON 0x0
#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
-#define nULTRA_XFER_ON 0x0
#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
/* Bit masks for ATAPI_DEV_ADDR */
/* Bit masks for ATAPI_INT_MASK */
#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
-#define nATAPI_DEV_INT_MASK 0x0
#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
-#define nPIO_DONE_MASK 0x0
#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
-#define nMULTI_DONE_MASK 0x0
#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
-#define nUDMAIN_DONE_MASK 0x0
#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
-#define nUDMAOUT_DONE_MASK 0x0
#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
-#define nHOST_TERM_XFER_MASK 0x0
#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
-#define nMULTI_TERM_MASK 0x0
#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define nUDMAIN_TERM_MASK 0x0
#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
-#define nUDMAOUT_TERM_MASK 0x0
/* Bit masks for ATAPI_INT_STATUS */
#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
-#define nATAPI_DEV_INT 0x0
#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
-#define nPIO_DONE_INT 0x0
#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
-#define nMULTI_DONE_INT 0x0
#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
-#define nUDMAIN_DONE_INT 0x0
#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
-#define nUDMAOUT_DONE_INT 0x0
#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
-#define nHOST_TERM_XFER_INT 0x0
#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
-#define nMULTI_TERM_INT 0x0
#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define nUDMAIN_TERM_INT 0x0
#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
-#define nUDMAOUT_TERM_INT 0x0
/* Bit masks for ATAPI_LINE_STATUS */
#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
-#define nATAPI_INTR 0x0
#define ATAPI_DASP 0x2 /* Device dasp to host line status */
-#define nATAPI_DASP 0x0
#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
-#define nATAPI_CS0N 0x0
#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
-#define nATAPI_CS1N 0x0
#define ATAPI_ADDR 0x70 /* ATAPI address line status */
#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
-#define nATAPI_DMAREQ 0x0
#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
-#define nATAPI_DMAACKN 0x0
#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
-#define nATAPI_DIOWN 0x0
#define ATAPI_DIORN 0x400 /* ATAPI read line status */
-#define nATAPI_DIORN 0x0
#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
-#define nATAPI_IORDY 0x0
/* Bit masks for ATAPI_SM_STATE */
/* Bit masks for ATAPI_TERMINATE */
#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
-#define nATAPI_HOST_TERM 0x0
/* Bit masks for ATAPI_REG_TIM_0 */
/* Bit masks for TIMER_ENABLE1 */
#define TIMEN8 0x1 /* Timer 8 Enable */
-#define nTIMEN8 0x0
#define TIMEN9 0x2 /* Timer 9 Enable */
-#define nTIMEN9 0x0
#define TIMEN10 0x4 /* Timer 10 Enable */
-#define nTIMEN10 0x0
/* Bit masks for TIMER_DISABLE1 */
#define TIMDIS8 0x1 /* Timer 8 Disable */
-#define nTIMDIS8 0x0
#define TIMDIS9 0x2 /* Timer 9 Disable */
-#define nTIMDIS9 0x0
#define TIMDIS10 0x4 /* Timer 10 Disable */
-#define nTIMDIS10 0x0
/* Bit masks for TIMER_STATUS1 */
#define TIMIL8 0x1 /* Timer 8 Interrupt */
-#define nTIMIL8 0x0
#define TIMIL9 0x2 /* Timer 9 Interrupt */
-#define nTIMIL9 0x0
#define TIMIL10 0x4 /* Timer 10 Interrupt */
-#define nTIMIL10 0x0
#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
-#define nTOVF_ERR8 0x0
#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
-#define nTOVF_ERR9 0x0
#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
-#define nTOVF_ERR10 0x0
#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
-#define nTRUN8 0x0
#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
-#define nTRUN9 0x0
#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
-#define nTRUN10 0x0
/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
/* Bit masks for USB_POWER */
#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
-#define nENABLE_SUSPENDM 0x0
#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
-#define nSUSPEND_MODE 0x0
#define RESUME_MODE 0x4 /* DMA Mode */
-#define nRESUME_MODE 0x0
#define RESET 0x8 /* Reset indicator */
-#define nRESET 0x0
#define HS_MODE 0x10 /* High Speed mode indicator */
-#define nHS_MODE 0x0
#define HS_ENABLE 0x20 /* high Speed Enable */
-#define nHS_ENABLE 0x0
#define SOFT_CONN 0x40 /* Soft connect */
-#define nSOFT_CONN 0x0
#define ISO_UPDATE 0x80 /* Isochronous update */
-#define nISO_UPDATE 0x0
/* Bit masks for USB_INTRTX */
#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
-#define nEP0_TX 0x0
#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
-#define nEP1_TX 0x0
#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
-#define nEP2_TX 0x0
#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
-#define nEP3_TX 0x0
#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
-#define nEP4_TX 0x0
#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
-#define nEP5_TX 0x0
#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
-#define nEP6_TX 0x0
#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
-#define nEP7_TX 0x0
/* Bit masks for USB_INTRRX */
#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
-#define nEP1_RX 0x0
#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
-#define nEP2_RX 0x0
#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
-#define nEP3_RX 0x0
#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
-#define nEP4_RX 0x0
#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
-#define nEP5_RX 0x0
#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
-#define nEP6_RX 0x0
#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
-#define nEP7_RX 0x0
/* Bit masks for USB_INTRTXE */
#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
-#define nEP0_TX_E 0x0
#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
-#define nEP1_TX_E 0x0
#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
-#define nEP2_TX_E 0x0
#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
-#define nEP3_TX_E 0x0
#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
-#define nEP4_TX_E 0x0
#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
-#define nEP5_TX_E 0x0
#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
-#define nEP6_TX_E 0x0
#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
-#define nEP7_TX_E 0x0
/* Bit masks for USB_INTRRXE */
#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
-#define nEP1_RX_E 0x0
#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
-#define nEP2_RX_E 0x0
#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
-#define nEP3_RX_E 0x0
#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
-#define nEP4_RX_E 0x0
#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
-#define nEP5_RX_E 0x0
#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
-#define nEP6_RX_E 0x0
#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
-#define nEP7_RX_E 0x0
/* Bit masks for USB_INTRUSB */
#define SUSPEND_B 0x1 /* Suspend indicator */
-#define nSUSPEND_B 0x0
#define RESUME_B 0x2 /* Resume indicator */
-#define nRESUME_B 0x0
#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
-#define nRESET_OR_BABLE_B 0x0
#define SOF_B 0x8 /* Start of frame */
-#define nSOF_B 0x0
#define CONN_B 0x10 /* Connection indicator */
-#define nCONN_B 0x0
#define DISCON_B 0x20 /* Disconnect indicator */
-#define nDISCON_B 0x0
#define SESSION_REQ_B 0x40 /* Session Request */
-#define nSESSION_REQ_B 0x0
#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
-#define nVBUS_ERROR_B 0x0
/* Bit masks for USB_INTRUSBE */
#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
-#define nSUSPEND_BE 0x0
#define RESUME_BE 0x2 /* Resume indicator int enable */
-#define nRESUME_BE 0x0
#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
-#define nRESET_OR_BABLE_BE 0x0
#define SOF_BE 0x8 /* Start of frame int enable */
-#define nSOF_BE 0x0
#define CONN_BE 0x10 /* Connection indicator int enable */
-#define nCONN_BE 0x0
#define DISCON_BE 0x20 /* Disconnect indicator int enable */
-#define nDISCON_BE 0x0
#define SESSION_REQ_BE 0x40 /* Session Request int enable */
-#define nSESSION_REQ_BE 0x0
#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
-#define nVBUS_ERROR_BE 0x0
/* Bit masks for USB_FRAME */
/* Bit masks for USB_GLOBAL_CTL */
#define GLOBAL_ENA 0x1 /* enables USB module */
-#define nGLOBAL_ENA 0x0
#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
-#define nEP1_TX_ENA 0x0
#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
-#define nEP2_TX_ENA 0x0
#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
-#define nEP3_TX_ENA 0x0
#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
-#define nEP4_TX_ENA 0x0
#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
-#define nEP5_TX_ENA 0x0
#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
-#define nEP6_TX_ENA 0x0
#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
-#define nEP7_TX_ENA 0x0
#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
-#define nEP1_RX_ENA 0x0
#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
-#define nEP2_RX_ENA 0x0
#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
-#define nEP3_RX_ENA 0x0
#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
-#define nEP4_RX_ENA 0x0
#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
-#define nEP5_RX_ENA 0x0
#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
-#define nEP6_RX_ENA 0x0
#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
-#define nEP7_RX_ENA 0x0
/* Bit masks for USB_OTG_DEV_CTL */
#define SESSION 0x1 /* session indicator */
-#define nSESSION 0x0
#define HOST_REQ 0x2 /* Host negotiation request */
-#define nHOST_REQ 0x0
#define HOST_MODE 0x4 /* indicates USBDRC is a host */
-#define nHOST_MODE 0x0
#define VBUS0 0x8 /* Vbus level indicator[0] */
-#define nVBUS0 0x0
#define VBUS1 0x10 /* Vbus level indicator[1] */
-#define nVBUS1 0x0
#define LSDEV 0x20 /* Low-speed indicator */
-#define nLSDEV 0x0
#define FSDEV 0x40 /* Full or High-speed indicator */
-#define nFSDEV 0x0
#define B_DEVICE 0x80 /* A' or 'B' device indicator */
-#define nB_DEVICE 0x0
/* Bit masks for USB_OTG_VBUS_IRQ */
#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
-#define nDRIVE_VBUS_ON 0x0
#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
-#define nDRIVE_VBUS_OFF 0x0
#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
-#define nCHRG_VBUS_START 0x0
#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
-#define nCHRG_VBUS_END 0x0
#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
-#define nDISCHRG_VBUS_START 0x0
#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
-#define nDISCHRG_VBUS_END 0x0
/* Bit masks for USB_OTG_VBUS_MASK */
#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
-#define nDRIVE_VBUS_ON_ENA 0x0
#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
-#define nDRIVE_VBUS_OFF_ENA 0x0
#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
-#define nCHRG_VBUS_START_ENA 0x0
#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
-#define nCHRG_VBUS_END_ENA 0x0
#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
-#define nDISCHRG_VBUS_START_ENA 0x0
#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
-#define nDISCHRG_VBUS_END_ENA 0x0
/* Bit masks for USB_CSR0 */
#define RXPKTRDY 0x1 /* data packet receive indicator */
-#define nRXPKTRDY 0x0
#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
-#define nTXPKTRDY 0x0
#define STALL_SENT 0x4 /* STALL handshake sent */
-#define nSTALL_SENT 0x0
#define DATAEND 0x8 /* Data end indicator */
-#define nDATAEND 0x0
#define SETUPEND 0x10 /* Setup end */
-#define nSETUPEND 0x0
#define SENDSTALL 0x20 /* Send STALL handshake */
-#define nSENDSTALL 0x0
#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
-#define nSERVICED_RXPKTRDY 0x0
#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
-#define nSERVICED_SETUPEND 0x0
#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
-#define nFLUSHFIFO 0x0
#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
-#define nSTALL_RECEIVED_H 0x0
#define SETUPPKT_H 0x8 /* send Setup token host mode */
-#define nSETUPPKT_H 0x0
#define ERROR_H 0x10 /* timeout error indicator host mode */
-#define nERROR_H 0x0
#define REQPKT_H 0x20 /* Request an IN transaction host mode */
-#define nREQPKT_H 0x0
#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
-#define nSTATUSPKT_H 0x0
#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
-#define nNAK_TIMEOUT_H 0x0
/* Bit masks for USB_COUNT0 */
/* Bit masks for USB_TXCSR */
#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
-#define nTXPKTRDY_T 0x0
#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
-#define nFIFO_NOT_EMPTY_T 0x0
#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
-#define nUNDERRUN_T 0x0
#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
-#define nFLUSHFIFO_T 0x0
#define STALL_SEND_T 0x10 /* issue a Stall handshake */
-#define nSTALL_SEND_T 0x0
#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
-#define nSTALL_SENT_T 0x0
#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_T 0x0
#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
-#define nINCOMPTX_T 0x0
#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_T 0x0
#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
-#define nFORCE_DATATOGGLE_T 0x0
#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_T 0x0
#define ISO_T 0x4000 /* enable Isochronous transfers */
-#define nISO_T 0x0
#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOSET_T 0x0
#define ERROR_TH 0x4 /* error condition host mode */
-#define nERROR_TH 0x0
#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_TH 0x0
#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
-#define nNAK_TIMEOUT_TH 0x0
/* Bit masks for USB_TXCOUNT */
/* Bit masks for USB_RXCSR */
#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
-#define nRXPKTRDY_R 0x0
#define FIFO_FULL_R 0x2 /* FIFO not empty */
-#define nFIFO_FULL_R 0x0
#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
-#define nOVERRUN_R 0x0
#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
-#define nDATAERROR_R 0x0
#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
-#define nFLUSHFIFO_R 0x0
#define STALL_SEND_R 0x20 /* issue a Stall handshake */
-#define nSTALL_SEND_R 0x0
#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
-#define nSTALL_SENT_R 0x0
#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_R 0x0
#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
-#define nINCOMPRX_R 0x0
#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_R 0x0
#define DISNYET_R 0x1000 /* disable Nyet handshakes */
-#define nDISNYET_R 0x0
#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_R 0x0
#define ISO_R 0x4000 /* enable Isochronous transfers */
-#define nISO_R 0x0
#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOCLEAR_R 0x0
#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
-#define nERROR_RH 0x0
#define REQPKT_RH 0x20 /* request an IN transaction host mode */
-#define nREQPKT_RH 0x0
#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_RH 0x0
#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
-#define nINCOMPRX_RH 0x0
#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
-#define nDMAREQMODE_RH 0x0
#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
-#define nAUTOREQ_RH 0x0
/* Bit masks for USB_RXCOUNT */
/* Bit masks for USB_DMA_INTERRUPT */
#define DMA0_INT 0x1 /* DMA0 pending interrupt */
-#define nDMA0_INT 0x0
#define DMA1_INT 0x2 /* DMA1 pending interrupt */
-#define nDMA1_INT 0x0
#define DMA2_INT 0x4 /* DMA2 pending interrupt */
-#define nDMA2_INT 0x0
#define DMA3_INT 0x8 /* DMA3 pending interrupt */
-#define nDMA3_INT 0x0
#define DMA4_INT 0x10 /* DMA4 pending interrupt */
-#define nDMA4_INT 0x0
#define DMA5_INT 0x20 /* DMA5 pending interrupt */
-#define nDMA5_INT 0x0
#define DMA6_INT 0x40 /* DMA6 pending interrupt */
-#define nDMA6_INT 0x0
#define DMA7_INT 0x80 /* DMA7 pending interrupt */
-#define nDMA7_INT 0x0
/* Bit masks for USB_DMAxCONTROL */
#define DMA_ENA 0x1 /* DMA enable */
-#define nDMA_ENA 0x0
#define DIRECTION 0x2 /* direction of DMA transfer */
-#define nDIRECTION 0x0
#define MODE 0x4 /* DMA Bus error */
-#define nMODE 0x0
#define INT_ENA 0x8 /* Interrupt enable */
-#define nINT_ENA 0x0
#define EPNUM 0xf0 /* EP number */
#define BUSERROR 0x100 /* DMA Bus error */
-#define nBUSERROR 0x0
/* Bit masks for USB_DMAxADDRHIGH */
/* Bit masks for HMDMAx_CONTROL */
#define HMDMAEN 0x1 /* Handshake MDMA Enable */
-#define nHMDMAEN 0x0
#define REP 0x2 /* Handshake MDMA Request Polarity */
-#define nREP 0x0
#define UTE 0x8 /* Urgency Threshold Enable */
-#define nUTE 0x0
#define OIE 0x10 /* Overflow Interrupt Enable */
-#define nOIE 0x0
#define BDIE 0x20 /* Block Done Interrupt Enable */
-#define nBDIE 0x0
#define MBDI 0x40 /* Mask Block Done Interrupt */
-#define nMBDI 0x0
#define DRQ 0x300 /* Handshake MDMA Request Type */
#define RBC 0x1000 /* Force Reload of BCOUNT */
-#define nRBC 0x0
#define PS 0x2000 /* Pin Status */
-#define nPS 0x0
#define OI 0x4000 /* Overflow Interrupt Generated */
-#define nOI 0x0
#define BDI 0x8000 /* Block Done Interrupt Generated */
-#define nBDI 0x0
/* ******************************************* */
/* MULTI BIT MACRO ENUMERATIONS */
/* Bit masks for PIXC_CTL */
#define PIXC_EN 0x1 /* Pixel Compositor Enable */
-#define nPIXC_EN 0x0
#define OVR_A_EN 0x2 /* Overlay A Enable */
-#define nOVR_A_EN 0x0
#define OVR_B_EN 0x4 /* Overlay B Enable */
-#define nOVR_B_EN 0x0
#define IMG_FORM 0x8 /* Image Data Format */
-#define nIMG_FORM 0x0
#define OVR_FORM 0x10 /* Overlay Data Format */
-#define nOVR_FORM 0x0
#define OUT_FORM 0x20 /* Output Data Format */
-#define nOUT_FORM 0x0
#define UDS_MOD 0x40 /* Resampling Mode */
-#define nUDS_MOD 0x0
#define TC_EN 0x80 /* Transparent Color Enable */
-#define nTC_EN 0x0
#define IMG_STAT 0x300 /* Image FIFO Status */
#define OVR_STAT 0xc00 /* Overlay FIFO Status */
#define WM_LVL 0x3000 /* FIFO Watermark Level */
/* Bit masks for PIXC_INTRSTAT */
#define OVR_INT_EN 0x1 /* Interrupt at End of Last Valid Overlay */
-#define nOVR_INT_EN 0x0
#define FRM_INT_EN 0x2 /* Interrupt at End of Frame */
-#define nFRM_INT_EN 0x0
#define OVR_INT_STAT 0x4 /* Overlay Interrupt Status */
-#define nOVR_INT_STAT 0x0
#define FRM_INT_STAT 0x8 /* Frame Interrupt Status */
-#define nFRM_INT_STAT 0x0
/* Bit masks for PIXC_RYCON */
#define A12 0xffc00 /* A12 in the Coefficient Matrix */
#define A13 0x3ff00000 /* A13 in the Coefficient Matrix */
#define RY_MULT4 0x40000000 /* Multiply Row by 4 */
-#define nRY_MULT4 0x0
/* Bit masks for PIXC_GUCON */
#define A22 0xffc00 /* A22 in the Coefficient Matrix */
#define A23 0x3ff00000 /* A23 in the Coefficient Matrix */
#define GU_MULT4 0x40000000 /* Multiply Row by 4 */
-#define nGU_MULT4 0x0
/* Bit masks for PIXC_BVCON */
#define A32 0xffc00 /* A32 in the Coefficient Matrix */
#define A33 0x3ff00000 /* A33 in the Coefficient Matrix */
#define BV_MULT4 0x40000000 /* Multiply Row by 4 */
-#define nBV_MULT4 0x0
/* Bit masks for PIXC_CCBIAS */
/* Bit masks for HOST_CONTROL */
#define HOST_EN 0x1 /* Host Enable */
-#define nHOST_EN 0x0
#define HOST_END 0x2 /* Host Endianess */
-#define nHOST_END 0x0
#define DATA_SIZE 0x4 /* Data Size */
-#define nDATA_SIZE 0x0
#define HOST_RST 0x8 /* Host Reset */
-#define nHOST_RST 0x0
#define HRDY_OVR 0x20 /* Host Ready Override */
-#define nHRDY_OVR 0x0
#define INT_MODE 0x40 /* Interrupt Mode */
-#define nINT_MODE 0x0
#define BT_EN 0x80 /* Bus Timeout Enable */
-#define nBT_EN 0x0
#define EHW 0x100 /* Enable Host Write */
-#define nEHW 0x0
#define EHR 0x200 /* Enable Host Read */
-#define nEHR 0x0
#define BDR 0x400 /* Burst DMA Requests */
-#define nBDR 0x0
/* Bit masks for HOST_STATUS */
#define READY 0x1 /* DMA Ready */
-#define nREADY 0x0
#define FIFOFULL 0x2 /* FIFO Full */
-#define nFIFOFULL 0x0
#define FIFOEMPTY 0x4 /* FIFO Empty */
-#define nFIFOEMPTY 0x0
-#define COMPLETE 0x8 /* DMA Complete */
-#define nCOMPLETE 0x0
+#define DMA_COMPLETE 0x8 /* DMA Complete */
#define HSHK 0x10 /* Host Handshake */
-#define nHSHK 0x0
#define TIMEOUT 0x20 /* Host Timeout */
-#define nTIMEOUT 0x0
#define HIRQ 0x40 /* Host Interrupt Request */
-#define nHIRQ 0x0
#define ALLOW_CNFG 0x80 /* Allow New Configuration */
-#define nALLOW_CNFG 0x0
#define DMA_DIR 0x100 /* DMA Direction */
-#define nDMA_DIR 0x0
#define BTE 0x200 /* Bus Timeout Enabled */
-#define nBTE 0x0
/* Bit masks for HOST_TIMEOUT */
/* Bit masks for MXVR_CONFIG */
#define MXVREN 0x1 /* MXVR Enable */
-#define nMXVREN 0x0
#define MMSM 0x2 /* MXVR Master/Slave Mode Select */
-#define nMMSM 0x0
#define ACTIVE 0x4 /* Active Mode */
-#define nACTIVE 0x0
#define SDELAY 0x8 /* Synchronous Data Delay */
-#define nSDELAY 0x0
#define NCMRXEN 0x10 /* Normal Control Message Receive Enable */
-#define nNCMRXEN 0x0
#define RWRRXEN 0x20 /* Remote Write Receive Enable */
-#define nRWRRXEN 0x0
#define MTXEN 0x40 /* MXVR Transmit Data Enable */
-#define nMTXEN 0x0
#define MTXONB 0x80 /* MXVR Phy Transmitter On */
-#define nMTXONB 0x0
#define EPARITY 0x100 /* Even Parity Select */
-#define nEPARITY 0x0
#define MSB 0x1e00 /* Master Synchronous Boundary */
#define APRXEN 0x2000 /* Asynchronous Packet Receive Enable */
-#define nAPRXEN 0x0
#define WAKEUP 0x4000 /* Wake-Up */
-#define nWAKEUP 0x0
#define LMECH 0x8000 /* Lock Mechanism Select */
-#define nLMECH 0x0
/* Bit masks for MXVR_STATE_0 */
#define NACT 0x1 /* Network Activity */
-#define nNACT 0x0
#define SBLOCK 0x2 /* Super Block Lock */
-#define nSBLOCK 0x0
#define FMPLLST 0xc /* Frequency Multiply PLL SM State */
#define CDRPLLST 0xe0 /* Clock/Data Recovery PLL SM State */
#define APBSY 0x100 /* Asynchronous Packet Transmit Buffer Busy */
-#define nAPBSY 0x0
#define APARB 0x200 /* Asynchronous Packet Arbitrating */
-#define nAPARB 0x0
#define APTX 0x400 /* Asynchronous Packet Transmitting */
-#define nAPTX 0x0
#define APRX 0x800 /* Receiving Asynchronous Packet */
-#define nAPRX 0x0
#define CMBSY 0x1000 /* Control Message Transmit Buffer Busy */
-#define nCMBSY 0x0
#define CMARB 0x2000 /* Control Message Arbitrating */
-#define nCMARB 0x0
#define CMTX 0x4000 /* Control Message Transmitting */
-#define nCMTX 0x0
#define CMRX 0x8000 /* Receiving Control Message */
-#define nCMRX 0x0
#define MRXONB 0x10000 /* MRXONB Pin State */
-#define nMRXONB 0x0
#define RGSIP 0x20000 /* Remote Get Source In Progress */
-#define nRGSIP 0x0
#define DALIP 0x40000 /* Resource Deallocate In Progress */
-#define nDALIP 0x0
#define ALIP 0x80000 /* Resource Allocate In Progress */
-#define nALIP 0x0
#define RRDIP 0x100000 /* Remote Read In Progress */
-#define nRRDIP 0x0
#define RWRIP 0x200000 /* Remote Write In Progress */
-#define nRWRIP 0x0
#define FLOCK 0x400000 /* Frame Lock */
-#define nFLOCK 0x0
#define BLOCK 0x800000 /* Block Lock */
-#define nBLOCK 0x0
#define RSB 0xf000000 /* Received Synchronous Boundary */
#define DERRNUM 0xf0000000 /* DMA Error Channel Number */
#define SRXNUMB 0xf /* Synchronous Receive FIFO Number of Bytes */
#define STXNUMB 0xf0 /* Synchronous Transmit FIFO Number of Bytes */
#define APCONT 0x100 /* Asynchronous Packet Continuation */
-#define nAPCONT 0x0
#define OBERRNUM 0xe00 /* DMA Out of Bounds Error Channel Number */
#define DMAACTIVE0 0x10000 /* DMA0 Active */
-#define nDMAACTIVE0 0x0
#define DMAACTIVE1 0x20000 /* DMA1 Active */
-#define nDMAACTIVE1 0x0
#define DMAACTIVE2 0x40000 /* DMA2 Active */
-#define nDMAACTIVE2 0x0
#define DMAACTIVE3 0x80000 /* DMA3 Active */
-#define nDMAACTIVE3 0x0
#define DMAACTIVE4 0x100000 /* DMA4 Active */
-#define nDMAACTIVE4 0x0
#define DMAACTIVE5 0x200000 /* DMA5 Active */
-#define nDMAACTIVE5 0x0
#define DMAACTIVE6 0x400000 /* DMA6 Active */
-#define nDMAACTIVE6 0x0
#define DMAACTIVE7 0x800000 /* DMA7 Active */
-#define nDMAACTIVE7 0x0
#define DMAPMEN0 0x1000000 /* DMA0 Pattern Matching Enabled */
-#define nDMAPMEN0 0x0
#define DMAPMEN1 0x2000000 /* DMA1 Pattern Matching Enabled */
-#define nDMAPMEN1 0x0
#define DMAPMEN2 0x4000000 /* DMA2 Pattern Matching Enabled */
-#define nDMAPMEN2 0x0
#define DMAPMEN3 0x8000000 /* DMA3 Pattern Matching Enabled */
-#define nDMAPMEN3 0x0
#define DMAPMEN4 0x10000000 /* DMA4 Pattern Matching Enabled */
-#define nDMAPMEN4 0x0
#define DMAPMEN5 0x20000000 /* DMA5 Pattern Matching Enabled */
-#define nDMAPMEN5 0x0
#define DMAPMEN6 0x40000000 /* DMA6 Pattern Matching Enabled */
-#define nDMAPMEN6 0x0
#define DMAPMEN7 0x80000000 /* DMA7 Pattern Matching Enabled */
-#define nDMAPMEN7 0x0
/* Bit masks for MXVR_INT_STAT_0 */
#define NI2A 0x1 /* Network Inactive to Active */
-#define nNI2A 0x0
#define NA2I 0x2 /* Network Active to Inactive */
-#define nNA2I 0x0
#define SBU2L 0x4 /* Super Block Unlock to Lock */
-#define nSBU2L 0x0
#define SBL2U 0x8 /* Super Block Lock to Unlock */
-#define nSBL2U 0x0
#define PRU 0x10 /* Position Register Updated */
-#define nPRU 0x0
#define MPRU 0x20 /* Maximum Position Register Updated */
-#define nMPRU 0x0
#define DRU 0x40 /* Delay Register Updated */
-#define nDRU 0x0
#define MDRU 0x80 /* Maximum Delay Register Updated */
-#define nMDRU 0x0
#define SBU 0x100 /* Synchronous Boundary Updated */
-#define nSBU 0x0
#define ATU 0x200 /* Allocation Table Updated */
-#define nATU 0x0
#define FCZ0 0x400 /* Frame Counter 0 Zero */
-#define nFCZ0 0x0
#define FCZ1 0x800 /* Frame Counter 1 Zero */
-#define nFCZ1 0x0
#define PERR 0x1000 /* Parity Error */
-#define nPERR 0x0
#define MH2L 0x2000 /* MRXONB High to Low */
-#define nMH2L 0x0
#define ML2H 0x4000 /* MRXONB Low to High */
-#define nML2H 0x0
#define WUP 0x8000 /* Wake-Up Preamble Received */
-#define nWUP 0x0
#define FU2L 0x10000 /* Frame Unlock to Lock */
-#define nFU2L 0x0
#define FL2U 0x20000 /* Frame Lock to Unlock */
-#define nFL2U 0x0
#define BU2L 0x40000 /* Block Unlock to Lock */
-#define nBU2L 0x0
#define BL2U 0x80000 /* Block Lock to Unlock */
-#define nBL2U 0x0
#define OBERR 0x100000 /* DMA Out of Bounds Error */
-#define nOBERR 0x0
#define PFL 0x200000 /* PLL Frequency Locked */
-#define nPFL 0x0
#define SCZ 0x400000 /* System Clock Counter Zero */
-#define nSCZ 0x0
#define FERR 0x800000 /* FIFO Error */
-#define nFERR 0x0
#define CMR 0x1000000 /* Control Message Received */
-#define nCMR 0x0
#define CMROF 0x2000000 /* Control Message Receive Buffer Overflow */
-#define nCMROF 0x0
#define CMTS 0x4000000 /* Control Message Transmit Buffer Successfully Sent */
-#define nCMTS 0x0
#define CMTC 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled */
-#define nCMTC 0x0
#define RWRC 0x10000000 /* Remote Write Control Message Completed */
-#define nRWRC 0x0
#define BCZ 0x20000000 /* Block Counter Zero */
-#define nBCZ 0x0
#define BMERR 0x40000000 /* Biphase Mark Coding Error */
-#define nBMERR 0x0
#define DERR 0x80000000 /* DMA Error */
-#define nDERR 0x0
/* Bit masks for MXVR_INT_STAT_1 */
#define HDONE0 0x1 /* DMA0 Half Done */
-#define nHDONE0 0x0
#define DONE0 0x2 /* DMA0 Done */
-#define nDONE0 0x0
#define APR 0x4 /* Asynchronous Packet Received */
-#define nAPR 0x0
#define APROF 0x8 /* Asynchronous Packet Receive Buffer Overflow */
-#define nAPROF 0x0
#define HDONE1 0x10 /* DMA1 Half Done */
-#define nHDONE1 0x0
#define DONE1 0x20 /* DMA1 Done */
-#define nDONE1 0x0
#define APTS 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent */
-#define nAPTS 0x0
#define APTC 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled */
-#define nAPTC 0x0
#define HDONE2 0x100 /* DMA2 Half Done */
-#define nHDONE2 0x0
#define DONE2 0x200 /* DMA2 Done */
-#define nDONE2 0x0
#define APRCE 0x400 /* Asynchronous Packet Receive CRC Error */
-#define nAPRCE 0x0
#define APRPE 0x800 /* Asynchronous Packet Receive Packet Error */
-#define nAPRPE 0x0
#define HDONE3 0x1000 /* DMA3 Half Done */
-#define nHDONE3 0x0
#define DONE3 0x2000 /* DMA3 Done */
-#define nDONE3 0x0
#define HDONE4 0x10000 /* DMA4 Half Done */
-#define nHDONE4 0x0
#define DONE4 0x20000 /* DMA4 Done */
-#define nDONE4 0x0
#define HDONE5 0x100000 /* DMA5 Half Done */
-#define nHDONE5 0x0
#define DONE5 0x200000 /* DMA5 Done */
-#define nDONE5 0x0
#define HDONE6 0x1000000 /* DMA6 Half Done */
-#define nHDONE6 0x0
#define DONE6 0x2000000 /* DMA6 Done */
-#define nDONE6 0x0
#define HDONE7 0x10000000 /* DMA7 Half Done */
-#define nHDONE7 0x0
#define DONE7 0x20000000 /* DMA7 Done */
-#define nDONE7 0x0
/* Bit masks for MXVR_INT_EN_0 */
#define NI2AEN 0x1 /* Network Inactive to Active Interrupt Enable */
-#define nNI2AEN 0x0
#define NA2IEN 0x2 /* Network Active to Inactive Interrupt Enable */
-#define nNA2IEN 0x0
#define SBU2LEN 0x4 /* Super Block Unlock to Lock Interrupt Enable */
-#define nSBU2LEN 0x0
#define SBL2UEN 0x8 /* Super Block Lock to Unlock Interrupt Enable */
-#define nSBL2UEN 0x0
#define PRUEN 0x10 /* Position Register Updated Interrupt Enable */
-#define nPRUEN 0x0
#define MPRUEN 0x20 /* Maximum Position Register Updated Interrupt Enable */
-#define nMPRUEN 0x0
#define DRUEN 0x40 /* Delay Register Updated Interrupt Enable */
-#define nDRUEN 0x0
#define MDRUEN 0x80 /* Maximum Delay Register Updated Interrupt Enable */
-#define nMDRUEN 0x0
#define SBUEN 0x100 /* Synchronous Boundary Updated Interrupt Enable */
-#define nSBUEN 0x0
#define ATUEN 0x200 /* Allocation Table Updated Interrupt Enable */
-#define nATUEN 0x0
#define FCZ0EN 0x400 /* Frame Counter 0 Zero Interrupt Enable */
-#define nFCZ0EN 0x0
#define FCZ1EN 0x800 /* Frame Counter 1 Zero Interrupt Enable */
-#define nFCZ1EN 0x0
#define PERREN 0x1000 /* Parity Error Interrupt Enable */
-#define nPERREN 0x0
#define MH2LEN 0x2000 /* MRXONB High to Low Interrupt Enable */
-#define nMH2LEN 0x0
#define ML2HEN 0x4000 /* MRXONB Low to High Interrupt Enable */
-#define nML2HEN 0x0
#define WUPEN 0x8000 /* Wake-Up Preamble Received Interrupt Enable */
-#define nWUPEN 0x0
#define FU2LEN 0x10000 /* Frame Unlock to Lock Interrupt Enable */
-#define nFU2LEN 0x0
#define FL2UEN 0x20000 /* Frame Lock to Unlock Interrupt Enable */
-#define nFL2UEN 0x0
#define BU2LEN 0x40000 /* Block Unlock to Lock Interrupt Enable */
-#define nBU2LEN 0x0
#define BL2UEN 0x80000 /* Block Lock to Unlock Interrupt Enable */
-#define nBL2UEN 0x0
#define OBERREN 0x100000 /* DMA Out of Bounds Error Interrupt Enable */
-#define nOBERREN 0x0
#define PFLEN 0x200000 /* PLL Frequency Locked Interrupt Enable */
-#define nPFLEN 0x0
#define SCZEN 0x400000 /* System Clock Counter Zero Interrupt Enable */
-#define nSCZEN 0x0
#define FERREN 0x800000 /* FIFO Error Interrupt Enable */
-#define nFERREN 0x0
#define CMREN 0x1000000 /* Control Message Received Interrupt Enable */
-#define nCMREN 0x0
#define CMROFEN 0x2000000 /* Control Message Receive Buffer Overflow Interrupt Enable */
-#define nCMROFEN 0x0
#define CMTSEN 0x4000000 /* Control Message Transmit Buffer Successfully Sent Interrupt Enable */
-#define nCMTSEN 0x0
#define CMTCEN 0x8000000 /* Control Message Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define nCMTCEN 0x0
#define RWRCEN 0x10000000 /* Remote Write Control Message Completed Interrupt Enable */
-#define nRWRCEN 0x0
#define BCZEN 0x20000000 /* Block Counter Zero Interrupt Enable */
-#define nBCZEN 0x0
#define BMERREN 0x40000000 /* Biphase Mark Coding Error Interrupt Enable */
-#define nBMERREN 0x0
#define DERREN 0x80000000 /* DMA Error Interrupt Enable */
-#define nDERREN 0x0
/* Bit masks for MXVR_INT_EN_1 */
#define HDONEEN0 0x1 /* DMA0 Half Done Interrupt Enable */
-#define nHDONEEN0 0x0
#define DONEEN0 0x2 /* DMA0 Done Interrupt Enable */
-#define nDONEEN0 0x0
#define APREN 0x4 /* Asynchronous Packet Received Interrupt Enable */
-#define nAPREN 0x0
#define APROFEN 0x8 /* Asynchronous Packet Receive Buffer Overflow Interrupt Enable */
-#define nAPROFEN 0x0
#define HDONEEN1 0x10 /* DMA1 Half Done Interrupt Enable */
-#define nHDONEEN1 0x0
#define DONEEN1 0x20 /* DMA1 Done Interrupt Enable */
-#define nDONEEN1 0x0
#define APTSEN 0x40 /* Asynchronous Packet Transmit Buffer Successfully Sent Interrupt Enable */
-#define nAPTSEN 0x0
#define APTCEN 0x80 /* Asynchronous Packet Transmit Buffer Successfully Cancelled Interrupt Enable */
-#define nAPTCEN 0x0
#define HDONEEN2 0x100 /* DMA2 Half Done Interrupt Enable */
-#define nHDONEEN2 0x0
#define DONEEN2 0x200 /* DMA2 Done Interrupt Enable */
-#define nDONEEN2 0x0
#define APRCEEN 0x400 /* Asynchronous Packet Receive CRC Error Interrupt Enable */
-#define nAPRCEEN 0x0
#define APRPEEN 0x800 /* Asynchronous Packet Receive Packet Error Interrupt Enable */
-#define nAPRPEEN 0x0
#define HDONEEN3 0x1000 /* DMA3 Half Done Interrupt Enable */
-#define nHDONEEN3 0x0
#define DONEEN3 0x2000 /* DMA3 Done Interrupt Enable */
-#define nDONEEN3 0x0
#define HDONEEN4 0x10000 /* DMA4 Half Done Interrupt Enable */
-#define nHDONEEN4 0x0
#define DONEEN4 0x20000 /* DMA4 Done Interrupt Enable */
-#define nDONEEN4 0x0
#define HDONEEN5 0x100000 /* DMA5 Half Done Interrupt Enable */
-#define nHDONEEN5 0x0
#define DONEEN5 0x200000 /* DMA5 Done Interrupt Enable */
-#define nDONEEN5 0x0
#define HDONEEN6 0x1000000 /* DMA6 Half Done Interrupt Enable */
-#define nHDONEEN6 0x0
#define DONEEN6 0x2000000 /* DMA6 Done Interrupt Enable */
-#define nDONEEN6 0x0
#define HDONEEN7 0x10000000 /* DMA7 Half Done Interrupt Enable */
-#define nHDONEEN7 0x0
#define DONEEN7 0x20000000 /* DMA7 Done Interrupt Enable */
-#define nDONEEN7 0x0
/* Bit masks for MXVR_POSITION */
#define POSITION 0x3f /* Node Position */
#define PVALID 0x8000 /* Node Position Valid */
-#define nPVALID 0x0
/* Bit masks for MXVR_MAX_POSITION */
#define MPOSITION 0x3f /* Maximum Node Position */
#define MPVALID 0x8000 /* Maximum Node Position Valid */
-#define nMPVALID 0x0
/* Bit masks for MXVR_DELAY */
#define DELAY 0x3f /* Node Frame Delay */
#define DVALID 0x8000 /* Node Frame Delay Valid */
-#define nDVALID 0x0
/* Bit masks for MXVR_MAX_DELAY */
#define MDELAY 0x3f /* Maximum Node Frame Delay */
#define MDVALID 0x8000 /* Maximum Node Frame Delay Valid */
-#define nMDVALID 0x0
/* Bit masks for MXVR_LADDR */
#define LADDR 0xffff /* Logical Address */
#define LVALID 0x80000000 /* Logical Address Valid */
-#define nLVALID 0x0
/* Bit masks for MXVR_GADDR */
#define GADDRL 0xff /* Group Address Lower Byte */
#define GVALID 0x8000 /* Group Address Valid */
-#define nGVALID 0x0
/* Bit masks for MXVR_AADDR */
#define AADDR 0xffff /* Alternate Address */
#define AVALID 0x80000000 /* Alternate Address Valid */
-#define nAVALID 0x0
/* Bit masks for MXVR_ALLOC_0 */
#define CL0 0x7f /* Channel 0 Connection Label */
#define CIU0 0x80 /* Channel 0 In Use */
-#define nCIU0 0x0
#define CL1 0x7f00 /* Channel 0 Connection Label */
#define CIU1 0x8000 /* Channel 0 In Use */
-#define nCIU1 0x0
#define CL2 0x7f0000 /* Channel 0 Connection Label */
#define CIU2 0x800000 /* Channel 0 In Use */
-#define nCIU2 0x0
#define CL3 0x7f000000 /* Channel 0 Connection Label */
#define CIU3 0x80000000 /* Channel 0 In Use */
-#define nCIU3 0x0
/* Bit masks for MXVR_ALLOC_1 */
#define CL4 0x7f /* Channel 4 Connection Label */
#define CIU4 0x80 /* Channel 4 In Use */
-#define nCIU4 0x0
#define CL5 0x7f00 /* Channel 5 Connection Label */
#define CIU5 0x8000 /* Channel 5 In Use */
-#define nCIU5 0x0
#define CL6 0x7f0000 /* Channel 6 Connection Label */
#define CIU6 0x800000 /* Channel 6 In Use */
-#define nCIU6 0x0
#define CL7 0x7f000000 /* Channel 7 Connection Label */
#define CIU7 0x80000000 /* Channel 7 In Use */
-#define nCIU7 0x0
/* Bit masks for MXVR_ALLOC_2 */
#define CL8 0x7f /* Channel 8 Connection Label */
#define CIU8 0x80 /* Channel 8 In Use */
-#define nCIU8 0x0
#define CL9 0x7f00 /* Channel 9 Connection Label */
#define CIU9 0x8000 /* Channel 9 In Use */
-#define nCIU9 0x0
#define CL10 0x7f0000 /* Channel 10 Connection Label */
#define CIU10 0x800000 /* Channel 10 In Use */
-#define nCIU10 0x0
#define CL11 0x7f000000 /* Channel 11 Connection Label */
#define CIU11 0x80000000 /* Channel 11 In Use */
-#define nCIU11 0x0
/* Bit masks for MXVR_ALLOC_3 */
#define CL12 0x7f /* Channel 12 Connection Label */
#define CIU12 0x80 /* Channel 12 In Use */
-#define nCIU12 0x0
#define CL13 0x7f00 /* Channel 13 Connection Label */
#define CIU13 0x8000 /* Channel 13 In Use */
-#define nCIU13 0x0
#define CL14 0x7f0000 /* Channel 14 Connection Label */
#define CIU14 0x800000 /* Channel 14 In Use */
-#define nCIU14 0x0
#define CL15 0x7f000000 /* Channel 15 Connection Label */
#define CIU15 0x80000000 /* Channel 15 In Use */
-#define nCIU15 0x0
/* Bit masks for MXVR_ALLOC_4 */
#define CL16 0x7f /* Channel 16 Connection Label */
#define CIU16 0x80 /* Channel 16 In Use */
-#define nCIU16 0x0
#define CL17 0x7f00 /* Channel 17 Connection Label */
#define CIU17 0x8000 /* Channel 17 In Use */
-#define nCIU17 0x0
#define CL18 0x7f0000 /* Channel 18 Connection Label */
#define CIU18 0x800000 /* Channel 18 In Use */
-#define nCIU18 0x0
#define CL19 0x7f000000 /* Channel 19 Connection Label */
#define CIU19 0x80000000 /* Channel 19 In Use */
-#define nCIU19 0x0
/* Bit masks for MXVR_ALLOC_5 */
#define CL20 0x7f /* Channel 20 Connection Label */
#define CIU20 0x80 /* Channel 20 In Use */
-#define nCIU20 0x0
#define CL21 0x7f00 /* Channel 21 Connection Label */
#define CIU21 0x8000 /* Channel 21 In Use */
-#define nCIU21 0x0
#define CL22 0x7f0000 /* Channel 22 Connection Label */
#define CIU22 0x800000 /* Channel 22 In Use */
-#define nCIU22 0x0
#define CL23 0x7f000000 /* Channel 23 Connection Label */
#define CIU23 0x80000000 /* Channel 23 In Use */
-#define nCIU23 0x0
/* Bit masks for MXVR_ALLOC_6 */
#define CL24 0x7f /* Channel 24 Connection Label */
#define CIU24 0x80 /* Channel 24 In Use */
-#define nCIU24 0x0
#define CL25 0x7f00 /* Channel 25 Connection Label */
#define CIU25 0x8000 /* Channel 25 In Use */
-#define nCIU25 0x0
#define CL26 0x7f0000 /* Channel 26 Connection Label */
#define CIU26 0x800000 /* Channel 26 In Use */
-#define nCIU26 0x0
#define CL27 0x7f000000 /* Channel 27 Connection Label */
#define CIU27 0x80000000 /* Channel 27 In Use */
-#define nCIU27 0x0
/* Bit masks for MXVR_ALLOC_7 */
#define CL28 0x7f /* Channel 28 Connection Label */
#define CIU28 0x80 /* Channel 28 In Use */
-#define nCIU28 0x0
#define CL29 0x7f00 /* Channel 29 Connection Label */
#define CIU29 0x8000 /* Channel 29 In Use */
-#define nCIU29 0x0
#define CL30 0x7f0000 /* Channel 30 Connection Label */
#define CIU30 0x800000 /* Channel 30 In Use */
-#define nCIU30 0x0
#define CL31 0x7f000000 /* Channel 31 Connection Label */
#define CIU31 0x80000000 /* Channel 31 In Use */
-#define nCIU31 0x0
/* Bit masks for MXVR_ALLOC_8 */
#define CL32 0x7f /* Channel 32 Connection Label */
#define CIU32 0x80 /* Channel 32 In Use */
-#define nCIU32 0x0
#define CL33 0x7f00 /* Channel 33 Connection Label */
#define CIU33 0x8000 /* Channel 33 In Use */
-#define nCIU33 0x0
#define CL34 0x7f0000 /* Channel 34 Connection Label */
#define CIU34 0x800000 /* Channel 34 In Use */
-#define nCIU34 0x0
#define CL35 0x7f000000 /* Channel 35 Connection Label */
#define CIU35 0x80000000 /* Channel 35 In Use */
-#define nCIU35 0x0
/* Bit masks for MXVR_ALLOC_9 */
#define CL36 0x7f /* Channel 36 Connection Label */
#define CIU36 0x80 /* Channel 36 In Use */
-#define nCIU36 0x0
#define CL37 0x7f00 /* Channel 37 Connection Label */
#define CIU37 0x8000 /* Channel 37 In Use */
-#define nCIU37 0x0
#define CL38 0x7f0000 /* Channel 38 Connection Label */
#define CIU38 0x800000 /* Channel 38 In Use */
-#define nCIU38 0x0
#define CL39 0x7f000000 /* Channel 39 Connection Label */
#define CIU39 0x80000000 /* Channel 39 In Use */
-#define nCIU39 0x0
/* Bit masks for MXVR_ALLOC_10 */
#define CL40 0x7f /* Channel 40 Connection Label */
#define CIU40 0x80 /* Channel 40 In Use */
-#define nCIU40 0x0
#define CL41 0x7f00 /* Channel 41 Connection Label */
#define CIU41 0x8000 /* Channel 41 In Use */
-#define nCIU41 0x0
#define CL42 0x7f0000 /* Channel 42 Connection Label */
#define CIU42 0x800000 /* Channel 42 In Use */
-#define nCIU42 0x0
#define CL43 0x7f000000 /* Channel 43 Connection Label */
#define CIU43 0x80000000 /* Channel 43 In Use */
-#define nCIU43 0x0
/* Bit masks for MXVR_ALLOC_11 */
#define CL44 0x7f /* Channel 44 Connection Label */
#define CIU44 0x80 /* Channel 44 In Use */
-#define nCIU44 0x0
#define CL45 0x7f00 /* Channel 45 Connection Label */
#define CIU45 0x8000 /* Channel 45 In Use */
-#define nCIU45 0x0
#define CL46 0x7f0000 /* Channel 46 Connection Label */
#define CIU46 0x800000 /* Channel 46 In Use */
-#define nCIU46 0x0
#define CL47 0x7f000000 /* Channel 47 Connection Label */
#define CIU47 0x80000000 /* Channel 47 In Use */
-#define nCIU47 0x0
/* Bit masks for MXVR_ALLOC_12 */
#define CL48 0x7f /* Channel 48 Connection Label */
#define CIU48 0x80 /* Channel 48 In Use */
-#define nCIU48 0x0
#define CL49 0x7f00 /* Channel 49 Connection Label */
#define CIU49 0x8000 /* Channel 49 In Use */
-#define nCIU49 0x0
#define CL50 0x7f0000 /* Channel 50 Connection Label */
#define CIU50 0x800000 /* Channel 50 In Use */
-#define nCIU50 0x0
#define CL51 0x7f000000 /* Channel 51 Connection Label */
#define CIU51 0x80000000 /* Channel 51 In Use */
-#define nCIU51 0x0
/* Bit masks for MXVR_ALLOC_13 */
#define CL52 0x7f /* Channel 52 Connection Label */
#define CIU52 0x80 /* Channel 52 In Use */
-#define nCIU52 0x0
#define CL53 0x7f00 /* Channel 53 Connection Label */
#define CIU53 0x8000 /* Channel 53 In Use */
-#define nCIU53 0x0
#define CL54 0x7f0000 /* Channel 54 Connection Label */
#define CIU54 0x800000 /* Channel 54 In Use */
-#define nCIU54 0x0
#define CL55 0x7f000000 /* Channel 55 Connection Label */
#define CIU55 0x80000000 /* Channel 55 In Use */
-#define nCIU55 0x0
/* Bit masks for MXVR_ALLOC_14 */
#define CL56 0x7f /* Channel 56 Connection Label */
#define CIU56 0x80 /* Channel 56 In Use */
-#define nCIU56 0x0
#define CL57 0x7f00 /* Channel 57 Connection Label */
#define CIU57 0x8000 /* Channel 57 In Use */
-#define nCIU57 0x0
#define CL58 0x7f0000 /* Channel 58 Connection Label */
#define CIU58 0x800000 /* Channel 58 In Use */
-#define nCIU58 0x0
#define CL59 0x7f000000 /* Channel 59 Connection Label */
#define CIU59 0x80000000 /* Channel 59 In Use */
-#define nCIU59 0x0
/* MXVR_SYNC_LCHAN_0 Masks */
/* Bit masks for MXVR_DMAx_CONFIG */
#define MDMAEN 0x1 /* DMA Channel Enable */
-#define nMDMAEN 0x0
#define DD 0x2 /* DMA Channel Direction */
-#define nDD 0x0
#define BY4SWAPEN 0x20 /* DMA Channel Four Byte Swap Enable */
-#define nBY4SWAPEN 0x0
#define LCHAN 0x3c0 /* DMA Channel Logical Channel */
#define BITSWAPEN 0x400 /* DMA Channel Bit Swap Enable */
-#define nBITSWAPEN 0x0
#define BY2SWAPEN 0x800 /* DMA Channel Two Byte Swap Enable */
-#define nBY2SWAPEN 0x0
#define MFLOW 0x7000 /* DMA Channel Operation Flow */
#define FIXEDPM 0x80000 /* DMA Channel Fixed Pattern Matching Select */
-#define nFIXEDPM 0x0
#define STARTPAT 0x300000 /* DMA Channel Start Pattern Select */
#define STOPPAT 0xc00000 /* DMA Channel Stop Pattern Select */
#define COUNTPOS 0x1c000000 /* DMA Channel Count Position */
/* Bit masks for MXVR_AP_CTL */
#define STARTAP 0x1 /* Start Asynchronous Packet Transmission */
-#define nSTARTAP 0x0
#define CANCELAP 0x2 /* Cancel Asynchronous Packet Transmission */
-#define nCANCELAP 0x0
#define RESETAP 0x4 /* Reset Asynchronous Packet Arbitration */
-#define nRESETAP 0x0
#define APRBE0 0x4000 /* Asynchronous Packet Receive Buffer Entry 0 */
-#define nAPRBE0 0x0
#define APRBE1 0x8000 /* Asynchronous Packet Receive Buffer Entry 1 */
-#define nAPRBE1 0x0
/* Bit masks for MXVR_APRB_START_ADDR */
-#define MXVR_APRB_START_ADDR 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */
+#define MXVR_APRB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Receive Buffer Start Address */
/* Bit masks for MXVR_APRB_CURR_ADDR */
-#define MXVR_APRB_CURR_ADDR 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
+#define MXVR_APRB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Receive Buffer Current Address */
/* Bit masks for MXVR_APTB_START_ADDR */
-#define MXVR_APTB_START_ADDR 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */
+#define MXVR_APTB_START_ADDR_MASK 0x1fffffe /* Asynchronous Packet Transmit Buffer Start Address */
/* Bit masks for MXVR_APTB_CURR_ADDR */
-#define MXVR_APTB_CURR_ADDR 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
+#define MXVR_APTB_CURR_ADDR_MASK 0xffffffff /* Asynchronous Packet Transmit Buffer Current Address */
/* Bit masks for MXVR_CM_CTL */
#define STARTCM 0x1 /* Start Control Message Transmission */
-#define nSTARTCM 0x0
#define CANCELCM 0x2 /* Cancel Control Message Transmission */
-#define nCANCELCM 0x0
#define CMRBE0 0x10000 /* Control Message Receive Buffer Entry 0 */
-#define nCMRBE0 0x0
#define CMRBE1 0x20000 /* Control Message Receive Buffer Entry 1 */
-#define nCMRBE1 0x0
#define CMRBE2 0x40000 /* Control Message Receive Buffer Entry 2 */
-#define nCMRBE2 0x0
#define CMRBE3 0x80000 /* Control Message Receive Buffer Entry 3 */
-#define nCMRBE3 0x0
#define CMRBE4 0x100000 /* Control Message Receive Buffer Entry 4 */
-#define nCMRBE4 0x0
#define CMRBE5 0x200000 /* Control Message Receive Buffer Entry 5 */
-#define nCMRBE5 0x0
#define CMRBE6 0x400000 /* Control Message Receive Buffer Entry 6 */
-#define nCMRBE6 0x0
#define CMRBE7 0x800000 /* Control Message Receive Buffer Entry 7 */
-#define nCMRBE7 0x0
#define CMRBE8 0x1000000 /* Control Message Receive Buffer Entry 8 */
-#define nCMRBE8 0x0
#define CMRBE9 0x2000000 /* Control Message Receive Buffer Entry 9 */
-#define nCMRBE9 0x0
#define CMRBE10 0x4000000 /* Control Message Receive Buffer Entry 10 */
-#define nCMRBE10 0x0
#define CMRBE11 0x8000000 /* Control Message Receive Buffer Entry 11 */
-#define nCMRBE11 0x0
#define CMRBE12 0x10000000 /* Control Message Receive Buffer Entry 12 */
-#define nCMRBE12 0x0
#define CMRBE13 0x20000000 /* Control Message Receive Buffer Entry 13 */
-#define nCMRBE13 0x0
#define CMRBE14 0x40000000 /* Control Message Receive Buffer Entry 14 */
-#define nCMRBE14 0x0
#define CMRBE15 0x80000000 /* Control Message Receive Buffer Entry 15 */
-#define nCMRBE15 0x0
/* Bit masks for MXVR_CMRB_START_ADDR */
-#define MXVR_CMRB_START_ADDR 0x1fffffe /* Control Message Receive Buffer Start Address */
+#define MXVR_CMRB_START_ADDR_MASK 0x1fffffe /* Control Message Receive Buffer Start Address */
/* Bit masks for MXVR_CMRB_CURR_ADDR */
-#define MXVR_CMRB_CURR_ADDR 0xffffffff /* Control Message Receive Buffer Current Address */
+#define MXVR_CMRB_CURR_ADDR_MASK 0xffffffff /* Control Message Receive Buffer Current Address */
/* Bit masks for MXVR_CMTB_START_ADDR */
-#define MXVR_CMTB_START_ADDR 0x1fffffe /* Control Message Transmit Buffer Start Address */
+#define MXVR_CMTB_START_ADDR_MASK 0x1fffffe /* Control Message Transmit Buffer Start Address */
/* Bit masks for MXVR_CMTB_CURR_ADDR */
-#define MXVR_CMTB_CURR_ADDR 0xffffffff /* Control Message Transmit Buffer Current Address */
+#define MXVR_CMTB_CURR_ADDR_MASK 0xffffffff /* Control Message Transmit Buffer Current Address */
/* Bit masks for MXVR_RRDB_START_ADDR */
-#define MXVR_RRDB_START_ADDR 0x1fffffe /* Remote Read Buffer Start Address */
+#define MXVR_RRDB_START_ADDR_MASK 0x1fffffe /* Remote Read Buffer Start Address */
/* Bit masks for MXVR_RRDB_CURR_ADDR */
-#define MXVR_RRDB_CURR_ADDR 0xffffffff /* Remote Read Buffer Current Address */
+#define MXVR_RRDB_CURR_ADDR_MASK 0xffffffff /* Remote Read Buffer Current Address */
/* Bit masks for MXVR_PAT_DATAx */
/* Bit masks for MXVR_PAT_EN_0 */
#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */
-#define nMATCH_EN_0_0 0x0
#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */
-#define nMATCH_EN_0_1 0x0
#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */
-#define nMATCH_EN_0_2 0x0
#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */
-#define nMATCH_EN_0_3 0x0
#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */
-#define nMATCH_EN_0_4 0x0
#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */
-#define nMATCH_EN_0_5 0x0
#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */
-#define nMATCH_EN_0_6 0x0
#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */
-#define nMATCH_EN_0_7 0x0
#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */
-#define nMATCH_EN_1_0 0x0
#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */
-#define nMATCH_EN_1_1 0x0
#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */
-#define nMATCH_EN_1_2 0x0
#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */
-#define nMATCH_EN_1_3 0x0
#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */
-#define nMATCH_EN_1_4 0x0
#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */
-#define nMATCH_EN_1_5 0x0
#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */
-#define nMATCH_EN_1_6 0x0
#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */
-#define nMATCH_EN_1_7 0x0
#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */
-#define nMATCH_EN_2_0 0x0
#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */
-#define nMATCH_EN_2_1 0x0
#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */
-#define nMATCH_EN_2_2 0x0
#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */
-#define nMATCH_EN_2_3 0x0
#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */
-#define nMATCH_EN_2_4 0x0
#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */
-#define nMATCH_EN_2_5 0x0
#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */
-#define nMATCH_EN_2_6 0x0
#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */
-#define nMATCH_EN_2_7 0x0
#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */
-#define nMATCH_EN_3_0 0x0
#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */
-#define nMATCH_EN_3_1 0x0
#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */
-#define nMATCH_EN_3_2 0x0
#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */
-#define nMATCH_EN_3_3 0x0
#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define nMATCH_EN_3_4 0x0
#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define nMATCH_EN_3_5 0x0
#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define nMATCH_EN_3_6 0x0
#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-#define nMATCH_EN_3_7 0x0
/* Bit masks for MXVR_PAT_EN_1 */
#define MATCH_EN_0_0 0x1 /* Pattern Match Enable Byte 0 Bit 0 */
-#define nMATCH_EN_0_0 0x0
#define MATCH_EN_0_1 0x2 /* Pattern Match Enable Byte 0 Bit 1 */
-#define nMATCH_EN_0_1 0x0
#define MATCH_EN_0_2 0x4 /* Pattern Match Enable Byte 0 Bit 2 */
-#define nMATCH_EN_0_2 0x0
#define MATCH_EN_0_3 0x8 /* Pattern Match Enable Byte 0 Bit 3 */
-#define nMATCH_EN_0_3 0x0
#define MATCH_EN_0_4 0x10 /* Pattern Match Enable Byte 0 Bit 4 */
-#define nMATCH_EN_0_4 0x0
#define MATCH_EN_0_5 0x20 /* Pattern Match Enable Byte 0 Bit 5 */
-#define nMATCH_EN_0_5 0x0
#define MATCH_EN_0_6 0x40 /* Pattern Match Enable Byte 0 Bit 6 */
-#define nMATCH_EN_0_6 0x0
#define MATCH_EN_0_7 0x80 /* Pattern Match Enable Byte 0 Bit 7 */
-#define nMATCH_EN_0_7 0x0
#define MATCH_EN_1_0 0x100 /* Pattern Match Enable Byte 1 Bit 0 */
-#define nMATCH_EN_1_0 0x0
#define MATCH_EN_1_1 0x200 /* Pattern Match Enable Byte 1 Bit 1 */
-#define nMATCH_EN_1_1 0x0
#define MATCH_EN_1_2 0x400 /* Pattern Match Enable Byte 1 Bit 2 */
-#define nMATCH_EN_1_2 0x0
#define MATCH_EN_1_3 0x800 /* Pattern Match Enable Byte 1 Bit 3 */
-#define nMATCH_EN_1_3 0x0
#define MATCH_EN_1_4 0x1000 /* Pattern Match Enable Byte 1 Bit 4 */
-#define nMATCH_EN_1_4 0x0
#define MATCH_EN_1_5 0x2000 /* Pattern Match Enable Byte 1 Bit 5 */
-#define nMATCH_EN_1_5 0x0
#define MATCH_EN_1_6 0x4000 /* Pattern Match Enable Byte 1 Bit 6 */
-#define nMATCH_EN_1_6 0x0
#define MATCH_EN_1_7 0x8000 /* Pattern Match Enable Byte 1 Bit 7 */
-#define nMATCH_EN_1_7 0x0
#define MATCH_EN_2_0 0x10000 /* Pattern Match Enable Byte 2 Bit 0 */
-#define nMATCH_EN_2_0 0x0
#define MATCH_EN_2_1 0x20000 /* Pattern Match Enable Byte 2 Bit 1 */
-#define nMATCH_EN_2_1 0x0
#define MATCH_EN_2_2 0x40000 /* Pattern Match Enable Byte 2 Bit 2 */
-#define nMATCH_EN_2_2 0x0
#define MATCH_EN_2_3 0x80000 /* Pattern Match Enable Byte 2 Bit 3 */
-#define nMATCH_EN_2_3 0x0
#define MATCH_EN_2_4 0x100000 /* Pattern Match Enable Byte 2 Bit 4 */
-#define nMATCH_EN_2_4 0x0
#define MATCH_EN_2_5 0x200000 /* Pattern Match Enable Byte 2 Bit 5 */
-#define nMATCH_EN_2_5 0x0
#define MATCH_EN_2_6 0x400000 /* Pattern Match Enable Byte 2 Bit 6 */
-#define nMATCH_EN_2_6 0x0
#define MATCH_EN_2_7 0x800000 /* Pattern Match Enable Byte 2 Bit 7 */
-#define nMATCH_EN_2_7 0x0
#define MATCH_EN_3_0 0x1000000 /* Pattern Match Enable Byte 3 Bit 0 */
-#define nMATCH_EN_3_0 0x0
#define MATCH_EN_3_1 0x2000000 /* Pattern Match Enable Byte 3 Bit 1 */
-#define nMATCH_EN_3_1 0x0
#define MATCH_EN_3_2 0x4000000 /* Pattern Match Enable Byte 3 Bit 2 */
-#define nMATCH_EN_3_2 0x0
#define MATCH_EN_3_3 0x8000000 /* Pattern Match Enable Byte 3 Bit 3 */
-#define nMATCH_EN_3_3 0x0
#define MATCH_EN_3_4 0x10000000 /* Pattern Match Enable Byte 3 Bit 4 */
-#define nMATCH_EN_3_4 0x0
#define MATCH_EN_3_5 0x20000000 /* Pattern Match Enable Byte 3 Bit 5 */
-#define nMATCH_EN_3_5 0x0
#define MATCH_EN_3_6 0x40000000 /* Pattern Match Enable Byte 3 Bit 6 */
-#define nMATCH_EN_3_6 0x0
#define MATCH_EN_3_7 0x80000000 /* Pattern Match Enable Byte 3 Bit 7 */
-#define nMATCH_EN_3_7 0x0
/* Bit masks for MXVR_FRAME_CNT_0 */
#define TX_CH0 0x3f /* Transmit Channel 0 */
#define MUTE_CH0 0x80 /* Mute Channel 0 */
-#define nMUTE_CH0 0x0
#define TX_CH1 0x3f00 /* Transmit Channel 0 */
#define MUTE_CH1 0x8000 /* Mute Channel 0 */
-#define nMUTE_CH1 0x0
#define TX_CH2 0x3f0000 /* Transmit Channel 0 */
#define MUTE_CH2 0x800000 /* Mute Channel 0 */
-#define nMUTE_CH2 0x0
#define TX_CH3 0x3f000000 /* Transmit Channel 0 */
#define MUTE_CH3 0x80000000 /* Mute Channel 0 */
-#define nMUTE_CH3 0x0
/* Bit masks for MXVR_ROUTING_1 */
#define TX_CH4 0x3f /* Transmit Channel 4 */
#define MUTE_CH4 0x80 /* Mute Channel 4 */
-#define nMUTE_CH4 0x0
#define TX_CH5 0x3f00 /* Transmit Channel 5 */
#define MUTE_CH5 0x8000 /* Mute Channel 5 */
-#define nMUTE_CH5 0x0
#define TX_CH6 0x3f0000 /* Transmit Channel 6 */
#define MUTE_CH6 0x800000 /* Mute Channel 6 */
-#define nMUTE_CH6 0x0
#define TX_CH7 0x3f000000 /* Transmit Channel 7 */
#define MUTE_CH7 0x80000000 /* Mute Channel 7 */
-#define nMUTE_CH7 0x0
/* Bit masks for MXVR_ROUTING_2 */
#define TX_CH8 0x3f /* Transmit Channel 8 */
#define MUTE_CH8 0x80 /* Mute Channel 8 */
-#define nMUTE_CH8 0x0
#define TX_CH9 0x3f00 /* Transmit Channel 9 */
#define MUTE_CH9 0x8000 /* Mute Channel 9 */
-#define nMUTE_CH9 0x0
#define TX_CH10 0x3f0000 /* Transmit Channel 10 */
#define MUTE_CH10 0x800000 /* Mute Channel 10 */
-#define nMUTE_CH10 0x0
#define TX_CH11 0x3f000000 /* Transmit Channel 11 */
#define MUTE_CH11 0x80000000 /* Mute Channel 11 */
-#define nMUTE_CH11 0x0
/* Bit masks for MXVR_ROUTING_3 */
#define TX_CH12 0x3f /* Transmit Channel 12 */
#define MUTE_CH12 0x80 /* Mute Channel 12 */
-#define nMUTE_CH12 0x0
#define TX_CH13 0x3f00 /* Transmit Channel 13 */
#define MUTE_CH13 0x8000 /* Mute Channel 13 */
-#define nMUTE_CH13 0x0
#define TX_CH14 0x3f0000 /* Transmit Channel 14 */
#define MUTE_CH14 0x800000 /* Mute Channel 14 */
-#define nMUTE_CH14 0x0
#define TX_CH15 0x3f000000 /* Transmit Channel 15 */
#define MUTE_CH15 0x80000000 /* Mute Channel 15 */
-#define nMUTE_CH15 0x0
/* Bit masks for MXVR_ROUTING_4 */
#define TX_CH16 0x3f /* Transmit Channel 16 */
#define MUTE_CH16 0x80 /* Mute Channel 16 */
-#define nMUTE_CH16 0x0
#define TX_CH17 0x3f00 /* Transmit Channel 17 */
#define MUTE_CH17 0x8000 /* Mute Channel 17 */
-#define nMUTE_CH17 0x0
#define TX_CH18 0x3f0000 /* Transmit Channel 18 */
#define MUTE_CH18 0x800000 /* Mute Channel 18 */
-#define nMUTE_CH18 0x0
#define TX_CH19 0x3f000000 /* Transmit Channel 19 */
#define MUTE_CH19 0x80000000 /* Mute Channel 19 */
-#define nMUTE_CH19 0x0
/* Bit masks for MXVR_ROUTING_5 */
#define TX_CH20 0x3f /* Transmit Channel 20 */
#define MUTE_CH20 0x80 /* Mute Channel 20 */
-#define nMUTE_CH20 0x0
#define TX_CH21 0x3f00 /* Transmit Channel 21 */
#define MUTE_CH21 0x8000 /* Mute Channel 21 */
-#define nMUTE_CH21 0x0
#define TX_CH22 0x3f0000 /* Transmit Channel 22 */
#define MUTE_CH22 0x800000 /* Mute Channel 22 */
-#define nMUTE_CH22 0x0
#define TX_CH23 0x3f000000 /* Transmit Channel 23 */
#define MUTE_CH23 0x80000000 /* Mute Channel 23 */
-#define nMUTE_CH23 0x0
/* Bit masks for MXVR_ROUTING_6 */
#define TX_CH24 0x3f /* Transmit Channel 24 */
#define MUTE_CH24 0x80 /* Mute Channel 24 */
-#define nMUTE_CH24 0x0
#define TX_CH25 0x3f00 /* Transmit Channel 25 */
#define MUTE_CH25 0x8000 /* Mute Channel 25 */
-#define nMUTE_CH25 0x0
#define TX_CH26 0x3f0000 /* Transmit Channel 26 */
#define MUTE_CH26 0x800000 /* Mute Channel 26 */
-#define nMUTE_CH26 0x0
#define TX_CH27 0x3f000000 /* Transmit Channel 27 */
#define MUTE_CH27 0x80000000 /* Mute Channel 27 */
-#define nMUTE_CH27 0x0
/* Bit masks for MXVR_ROUTING_7 */
#define TX_CH28 0x3f /* Transmit Channel 28 */
#define MUTE_CH28 0x80 /* Mute Channel 28 */
-#define nMUTE_CH28 0x0
#define TX_CH29 0x3f00 /* Transmit Channel 29 */
#define MUTE_CH29 0x8000 /* Mute Channel 29 */
-#define nMUTE_CH29 0x0
#define TX_CH30 0x3f0000 /* Transmit Channel 30 */
#define MUTE_CH30 0x800000 /* Mute Channel 30 */
-#define nMUTE_CH30 0x0
#define TX_CH31 0x3f000000 /* Transmit Channel 31 */
#define MUTE_CH31 0x80000000 /* Mute Channel 31 */
-#define nMUTE_CH31 0x0
/* Bit masks for MXVR_ROUTING_8 */
#define TX_CH32 0x3f /* Transmit Channel 32 */
#define MUTE_CH32 0x80 /* Mute Channel 32 */
-#define nMUTE_CH32 0x0
#define TX_CH33 0x3f00 /* Transmit Channel 33 */
#define MUTE_CH33 0x8000 /* Mute Channel 33 */
-#define nMUTE_CH33 0x0
#define TX_CH34 0x3f0000 /* Transmit Channel 34 */
#define MUTE_CH34 0x800000 /* Mute Channel 34 */
-#define nMUTE_CH34 0x0
#define TX_CH35 0x3f000000 /* Transmit Channel 35 */
#define MUTE_CH35 0x80000000 /* Mute Channel 35 */
-#define nMUTE_CH35 0x0
/* Bit masks for MXVR_ROUTING_9 */
#define TX_CH36 0x3f /* Transmit Channel 36 */
#define MUTE_CH36 0x80 /* Mute Channel 36 */
-#define nMUTE_CH36 0x0
#define TX_CH37 0x3f00 /* Transmit Channel 37 */
#define MUTE_CH37 0x8000 /* Mute Channel 37 */
-#define nMUTE_CH37 0x0
#define TX_CH38 0x3f0000 /* Transmit Channel 38 */
#define MUTE_CH38 0x800000 /* Mute Channel 38 */
-#define nMUTE_CH38 0x0
#define TX_CH39 0x3f000000 /* Transmit Channel 39 */
#define MUTE_CH39 0x80000000 /* Mute Channel 39 */
-#define nMUTE_CH39 0x0
/* Bit masks for MXVR_ROUTING_10 */
#define TX_CH40 0x3f /* Transmit Channel 40 */
#define MUTE_CH40 0x80 /* Mute Channel 40 */
-#define nMUTE_CH40 0x0
#define TX_CH41 0x3f00 /* Transmit Channel 41 */
#define MUTE_CH41 0x8000 /* Mute Channel 41 */
-#define nMUTE_CH41 0x0
#define TX_CH42 0x3f0000 /* Transmit Channel 42 */
#define MUTE_CH42 0x800000 /* Mute Channel 42 */
-#define nMUTE_CH42 0x0
#define TX_CH43 0x3f000000 /* Transmit Channel 43 */
#define MUTE_CH43 0x80000000 /* Mute Channel 43 */
-#define nMUTE_CH43 0x0
/* Bit masks for MXVR_ROUTING_11 */
#define TX_CH44 0x3f /* Transmit Channel 44 */
#define MUTE_CH44 0x80 /* Mute Channel 44 */
-#define nMUTE_CH44 0x0
#define TX_CH45 0x3f00 /* Transmit Channel 45 */
#define MUTE_CH45 0x8000 /* Mute Channel 45 */
-#define nMUTE_CH45 0x0
#define TX_CH46 0x3f0000 /* Transmit Channel 46 */
#define MUTE_CH46 0x800000 /* Mute Channel 46 */
-#define nMUTE_CH46 0x0
#define TX_CH47 0x3f000000 /* Transmit Channel 47 */
#define MUTE_CH47 0x80000000 /* Mute Channel 47 */
-#define nMUTE_CH47 0x0
/* Bit masks for MXVR_ROUTING_12 */
#define TX_CH48 0x3f /* Transmit Channel 48 */
#define MUTE_CH48 0x80 /* Mute Channel 48 */
-#define nMUTE_CH48 0x0
#define TX_CH49 0x3f00 /* Transmit Channel 49 */
#define MUTE_CH49 0x8000 /* Mute Channel 49 */
-#define nMUTE_CH49 0x0
#define TX_CH50 0x3f0000 /* Transmit Channel 50 */
#define MUTE_CH50 0x800000 /* Mute Channel 50 */
-#define nMUTE_CH50 0x0
#define TX_CH51 0x3f000000 /* Transmit Channel 51 */
#define MUTE_CH51 0x80000000 /* Mute Channel 51 */
-#define nMUTE_CH51 0x0
/* Bit masks for MXVR_ROUTING_13 */
#define TX_CH52 0x3f /* Transmit Channel 52 */
#define MUTE_CH52 0x80 /* Mute Channel 52 */
-#define nMUTE_CH52 0x0
#define TX_CH53 0x3f00 /* Transmit Channel 53 */
#define MUTE_CH53 0x8000 /* Mute Channel 53 */
-#define nMUTE_CH53 0x0
#define TX_CH54 0x3f0000 /* Transmit Channel 54 */
#define MUTE_CH54 0x800000 /* Mute Channel 54 */
-#define nMUTE_CH54 0x0
#define TX_CH55 0x3f000000 /* Transmit Channel 55 */
#define MUTE_CH55 0x80000000 /* Mute Channel 55 */
-#define nMUTE_CH55 0x0
/* Bit masks for MXVR_ROUTING_14 */
#define TX_CH56 0x3f /* Transmit Channel 56 */
#define MUTE_CH56 0x80 /* Mute Channel 56 */
-#define nMUTE_CH56 0x0
#define TX_CH57 0x3f00 /* Transmit Channel 57 */
#define MUTE_CH57 0x8000 /* Mute Channel 57 */
-#define nMUTE_CH57 0x0
#define TX_CH58 0x3f0000 /* Transmit Channel 58 */
#define MUTE_CH58 0x800000 /* Mute Channel 58 */
-#define nMUTE_CH58 0x0
#define TX_CH59 0x3f000000 /* Transmit Channel 59 */
#define MUTE_CH59 0x80000000 /* Mute Channel 59 */
-#define nMUTE_CH59 0x0
/* Bit masks for MXVR_BLOCK_CNT */
/* Bit masks for MXVR_CLK_CTL */
#define MXTALCEN 0x1 /* MXVR Crystal Oscillator Clock Enable */
-#define nMXTALCEN 0x0
#define MXTALFEN 0x2 /* MXVR Crystal Oscillator Feedback Enable */
-#define nMXTALFEN 0x0
#define MXTALMUL 0x30 /* MXVR Crystal Multiplier */
#define CLKX3SEL 0x80 /* Clock Generation Source Select */
-#define nCLKX3SEL 0x0
#define MMCLKEN 0x100 /* Master Clock Enable */
-#define nMMCLKEN 0x0
#define MMCLKMUL 0x1e00 /* Master Clock Multiplication Factor */
#define PLLSMPS 0xe000 /* MXVR PLL State Machine Prescaler */
#define MBCLKEN 0x10000 /* Bit Clock Enable */
-#define nMBCLKEN 0x0
#define MBCLKDIV 0x1e0000 /* Bit Clock Divide Factor */
#define INVRX 0x800000 /* Invert Receive Data */
-#define nINVRX 0x0
#define MFSEN 0x1000000 /* Frame Sync Enable */
-#define nMFSEN 0x0
#define MFSDIV 0x1e000000 /* Frame Sync Divide Factor */
#define MFSSEL 0x60000000 /* Frame Sync Select */
#define MFSSYNC 0x80000000 /* Frame Sync Synchronization Select */
-#define nMFSSYNC 0x0
/* Bit masks for MXVR_CDRPLL_CTL */
#define CDRSMEN 0x1 /* MXVR CDRPLL State Machine Enable */
-#define nCDRSMEN 0x0
#define CDRRSTB 0x2 /* MXVR CDRPLL Reset */
-#define nCDRRSTB 0x0
#define CDRSVCO 0x4 /* MXVR CDRPLL Start VCO */
-#define nCDRSVCO 0x0
#define CDRMODE 0x8 /* MXVR CDRPLL CDR Mode Select */
-#define nCDRMODE 0x0
#define CDRSCNT 0x3f0 /* MXVR CDRPLL Start Counter */
#define CDRLCNT 0xfc00 /* MXVR CDRPLL Lock Counter */
#define CDRSHPSEL 0x3f0000 /* MXVR CDRPLL Shaper Select */
#define CDRSHPEN 0x800000 /* MXVR CDRPLL Shaper Enable */
-#define nCDRSHPEN 0x0
#define CDRCPSEL 0xff000000 /* MXVR CDRPLL Charge Pump Current Select */
/* Bit masks for MXVR_FMPLL_CTL */
#define FMSMEN 0x1 /* MXVR FMPLL State Machine Enable */
-#define nFMSMEN 0x0
#define FMRSTB 0x2 /* MXVR FMPLL Reset */
-#define nFMRSTB 0x0
#define FMSVCO 0x4 /* MXVR FMPLL Start VCO */
-#define nFMSVCO 0x0
#define FMSCNT 0x3f0 /* MXVR FMPLL Start Counter */
#define FMLCNT 0xfc00 /* MXVR FMPLL Lock Counter */
#define FMCPSEL 0xff000000 /* MXVR FMPLL Charge Pump Current Select */
/* Bit masks for MXVR_PIN_CTL */
#define MTXONBOD 0x1 /* MTXONB Open Drain Select */
-#define nMTXONBOD 0x0
#define MTXONBG 0x2 /* MTXONB Gates MTX Select */
-#define nMTXONBG 0x0
#define MFSOE 0x10 /* MFS Output Enable */
-#define nMFSOE 0x0
#define MFSGPSEL 0x20 /* MFS General Purpose Output Select */
-#define nMFSGPSEL 0x0
#define MFSGPDAT 0x40 /* MFS General Purpose Output Data */
-#define nMFSGPDAT 0x0
/* Bit masks for MXVR_SCLK_CNT */
/* Bit masks for KPAD_CTL */
#define KPAD_EN 0x1 /* Keypad Enable */
-#define nKPAD_EN 0x0
#define KPAD_IRQMODE 0x6 /* Key Press Interrupt Enable */
#define KPAD_ROWEN 0x1c00 /* Row Enable Width */
#define KPAD_COLEN 0xe000 /* Column Enable Width */
/* Bit masks for KPAD_STAT */
#define KPAD_IRQ 0x1 /* Keypad Interrupt Status */
-#define nKPAD_IRQ 0x0
#define KPAD_MROWCOL 0x6 /* Multiple Row/Column Keypress Status */
#define KPAD_PRESSED 0x8 /* Key press current status */
-#define nKPAD_PRESSED 0x0
/* Bit masks for KPAD_SOFTEVAL */
#define KPAD_SOFTEVAL_E 0x2 /* Software Programmable Force Evaluate */
-#define nKPAD_SOFTEVAL_E 0x0
/* Bit masks for SDH_COMMAND */
#define CMD_IDX 0x3f /* Command Index */
#define CMD_RSP 0x40 /* Response */
-#define nCMD_RSP 0x0
#define CMD_L_RSP 0x80 /* Long Response */
-#define nCMD_L_RSP 0x0
#define CMD_INT_E 0x100 /* Command Interrupt */
-#define nCMD_INT_E 0x0
#define CMD_PEND_E 0x200 /* Command Pending */
-#define nCMD_PEND_E 0x0
#define CMD_E 0x400 /* Command Enable */
-#define nCMD_E 0x0
/* Bit masks for SDH_PWR_CTL */
#define TBD 0x3c /* TBD */
#endif
#define SD_CMD_OD 0x40 /* Open Drain Output */
-#define nSD_CMD_OD 0x0
#define ROD_CTL 0x80 /* Rod Control */
-#define nROD_CTL 0x0
/* Bit masks for SDH_CLK_CTL */
#define CLKDIV 0xff /* MC_CLK Divisor */
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
-#define nCLK_E 0x0
#define PWR_SV_E 0x200 /* Power Save Enable */
-#define nPWR_SV_E 0x0
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
-#define nCLKDIV_BYPASS 0x0
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
-#define nWIDE_BUS 0x0
/* Bit masks for SDH_RESP_CMD */
/* Bit masks for SDH_DATA_CTL */
#define DTX_E 0x1 /* Data Transfer Enable */
-#define nDTX_E 0x0
#define DTX_DIR 0x2 /* Data Transfer Direction */
-#define nDTX_DIR 0x0
#define DTX_MODE 0x4 /* Data Transfer Mode */
-#define nDTX_MODE 0x0
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
-#define nDTX_DMA_E 0x0
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
/* Bit masks for SDH_STATUS */
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
-#define nCMD_CRC_FAIL 0x0
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
-#define nDAT_CRC_FAIL 0x0
-#define CMD_TIMEOUT 0x4 /* CMD Time Out */
-#define nCMD_TIMEOUT 0x0
-#define DAT_TIMEOUT 0x8 /* Data Time Out */
-#define nDAT_TIMEOUT 0x0
+#define CMD_TIME_OUT 0x4 /* CMD Time Out */
+#define DAT_TIME_OUT 0x8 /* Data Time Out */
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
-#define nTX_UNDERRUN 0x0
#define RX_OVERRUN 0x20 /* Receive Overrun */
-#define nRX_OVERRUN 0x0
#define CMD_RESP_END 0x40 /* CMD Response End */
-#define nCMD_RESP_END 0x0
#define CMD_SENT 0x80 /* CMD Sent */
-#define nCMD_SENT 0x0
#define DAT_END 0x100 /* Data End */
-#define nDAT_END 0x0
#define START_BIT_ERR 0x200 /* Start Bit Error */
-#define nSTART_BIT_ERR 0x0
#define DAT_BLK_END 0x400 /* Data Block End */
-#define nDAT_BLK_END 0x0
#define CMD_ACT 0x800 /* CMD Active */
-#define nCMD_ACT 0x0
#define TX_ACT 0x1000 /* Transmit Active */
-#define nTX_ACT 0x0
#define RX_ACT 0x2000 /* Receive Active */
-#define nRX_ACT 0x0
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
-#define nTX_FIFO_STAT 0x0
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
-#define nRX_FIFO_STAT 0x0
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
-#define nTX_FIFO_FULL 0x0
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
-#define nRX_FIFO_FULL 0x0
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
-#define nTX_FIFO_ZERO 0x0
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
-#define nRX_DAT_ZERO 0x0
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
-#define nTX_DAT_RDY 0x0
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
-#define nRX_FIFO_RDY 0x0
/* Bit masks for SDH_STATUS_CLR */
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
-#define nCMD_CRC_FAIL_STAT 0x0
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
-#define nDAT_CRC_FAIL_STAT 0x0
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
-#define nCMD_TIMEOUT_STAT 0x0
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
-#define nDAT_TIMEOUT_STAT 0x0
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
-#define nTX_UNDERRUN_STAT 0x0
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
-#define nRX_OVERRUN_STAT 0x0
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
-#define nCMD_RESP_END_STAT 0x0
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
-#define nCMD_SENT_STAT 0x0
#define DAT_END_STAT 0x100 /* Data End Status */
-#define nDAT_END_STAT 0x0
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
-#define nSTART_BIT_ERR_STAT 0x0
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
-#define nDAT_BLK_END_STAT 0x0
/* Bit masks for SDH_MASK0 */
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
-#define nCMD_CRC_FAIL_MASK 0x0
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
-#define nDAT_CRC_FAIL_MASK 0x0
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
-#define nCMD_TIMEOUT_MASK 0x0
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
-#define nDAT_TIMEOUT_MASK 0x0
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
-#define nTX_UNDERRUN_MASK 0x0
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
-#define nRX_OVERRUN_MASK 0x0
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
-#define nCMD_RESP_END_MASK 0x0
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
-#define nCMD_SENT_MASK 0x0
#define DAT_END_MASK 0x100 /* Data End Mask */
-#define nDAT_END_MASK 0x0
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
-#define nSTART_BIT_ERR_MASK 0x0
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
-#define nDAT_BLK_END_MASK 0x0
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
-#define nCMD_ACT_MASK 0x0
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
-#define nTX_ACT_MASK 0x0
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
-#define nRX_ACT_MASK 0x0
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
-#define nTX_FIFO_STAT_MASK 0x0
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
-#define nRX_FIFO_STAT_MASK 0x0
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
-#define nTX_FIFO_FULL_MASK 0x0
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
-#define nRX_FIFO_FULL_MASK 0x0
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
-#define nTX_FIFO_ZERO_MASK 0x0
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
-#define nRX_DAT_ZERO_MASK 0x0
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
-#define nTX_DAT_RDY_MASK 0x0
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
-#define nRX_FIFO_RDY_MASK 0x0
/* Bit masks for SDH_FIFO_CNT */
/* Bit masks for SDH_E_STATUS */
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
-#define nSDIO_INT_DET 0x0
#define SD_CARD_DET 0x10 /* SD Card Detect */
-#define nSD_CARD_DET 0x0
/* Bit masks for SDH_E_MASK */
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
-#define nSDIO_MSK 0x0
#define SCD_MSK 0x40 /* Mask Card Detect */
-#define nSCD_MSK 0x0
/* Bit masks for SDH_CFG */
#define CLKS_EN 0x1 /* Clocks Enable */
-#define nCLKS_EN 0x0
#define SD4E 0x4 /* SDIO 4-Bit Enable */
-#define nSD4E 0x0
#define MWE 0x8 /* Moving Window Enable */
-#define nMWE 0x0
#define SD_RST 0x10 /* SDMMC Reset */
-#define nSD_RST 0x0
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
-#define nPUP_SDDAT 0x0
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
-#define nPUP_SDDAT3 0x0
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
-#define nPD_SDDAT3 0x0
/* Bit masks for SDH_RD_WAIT_EN */
#define RWR 0x1 /* Read Wait Request */
-#define nRWR 0x0
/* Bit masks for ATAPI_CONTROL */
#define PIO_START 0x1 /* Start PIO/Reg Op */
-#define nPIO_START 0x0
#define MULTI_START 0x2 /* Start Multi-DMA Op */
-#define nMULTI_START 0x0
#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
-#define nULTRA_START 0x0
#define XFER_DIR 0x8 /* Transfer Direction */
-#define nXFER_DIR 0x0
#define IORDY_EN 0x10 /* IORDY Enable */
-#define nIORDY_EN 0x0
#define FIFO_FLUSH 0x20 /* Flush FIFOs */
-#define nFIFO_FLUSH 0x0
#define SOFT_RST 0x40 /* Soft Reset */
-#define nSOFT_RST 0x0
#define DEV_RST 0x80 /* Device Reset */
-#define nDEV_RST 0x0
#define TFRCNT_RST 0x100 /* Trans Count Reset */
-#define nTFRCNT_RST 0x0
#define END_ON_TERM 0x200 /* End/Terminate Select */
-#define nEND_ON_TERM 0x0
#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
-#define nPIO_USE_DMA 0x0
#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
/* Bit masks for ATAPI_STATUS */
#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
-#define nPIO_XFER_ON 0x0
#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
-#define nMULTI_XFER_ON 0x0
#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
-#define nULTRA_XFER_ON 0x0
#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
/* Bit masks for ATAPI_DEV_ADDR */
/* Bit masks for ATAPI_INT_MASK */
#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
-#define nATAPI_DEV_INT_MASK 0x0
#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
-#define nPIO_DONE_MASK 0x0
#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
-#define nMULTI_DONE_MASK 0x0
#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
-#define nUDMAIN_DONE_MASK 0x0
#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
-#define nUDMAOUT_DONE_MASK 0x0
#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
-#define nHOST_TERM_XFER_MASK 0x0
#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
-#define nMULTI_TERM_MASK 0x0
#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
-#define nUDMAIN_TERM_MASK 0x0
#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
-#define nUDMAOUT_TERM_MASK 0x0
/* Bit masks for ATAPI_INT_STATUS */
#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
-#define nATAPI_DEV_INT 0x0
#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
-#define nPIO_DONE_INT 0x0
#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
-#define nMULTI_DONE_INT 0x0
#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
-#define nUDMAIN_DONE_INT 0x0
#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
-#define nUDMAOUT_DONE_INT 0x0
#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
-#define nHOST_TERM_XFER_INT 0x0
#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
-#define nMULTI_TERM_INT 0x0
#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
-#define nUDMAIN_TERM_INT 0x0
#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
-#define nUDMAOUT_TERM_INT 0x0
/* Bit masks for ATAPI_LINE_STATUS */
#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
-#define nATAPI_INTR 0x0
#define ATAPI_DASP 0x2 /* Device dasp to host line status */
-#define nATAPI_DASP 0x0
#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
-#define nATAPI_CS0N 0x0
#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
-#define nATAPI_CS1N 0x0
#define ATAPI_ADDR 0x70 /* ATAPI address line status */
#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
-#define nATAPI_DMAREQ 0x0
#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
-#define nATAPI_DMAACKN 0x0
#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
-#define nATAPI_DIOWN 0x0
#define ATAPI_DIORN 0x400 /* ATAPI read line status */
-#define nATAPI_DIORN 0x0
#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
-#define nATAPI_IORDY 0x0
/* Bit masks for ATAPI_SM_STATE */
/* Bit masks for ATAPI_TERMINATE */
#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
-#define nATAPI_HOST_TERM 0x0
/* Bit masks for ATAPI_REG_TIM_0 */
/* Bit masks for TIMER_ENABLE1 */
#define TIMEN8 0x1 /* Timer 8 Enable */
-#define nTIMEN8 0x0
#define TIMEN9 0x2 /* Timer 9 Enable */
-#define nTIMEN9 0x0
#define TIMEN10 0x4 /* Timer 10 Enable */
-#define nTIMEN10 0x0
/* Bit masks for TIMER_DISABLE1 */
#define TIMDIS8 0x1 /* Timer 8 Disable */
-#define nTIMDIS8 0x0
#define TIMDIS9 0x2 /* Timer 9 Disable */
-#define nTIMDIS9 0x0
#define TIMDIS10 0x4 /* Timer 10 Disable */
-#define nTIMDIS10 0x0
/* Bit masks for TIMER_STATUS1 */
#define TIMIL8 0x1 /* Timer 8 Interrupt */
-#define nTIMIL8 0x0
#define TIMIL9 0x2 /* Timer 9 Interrupt */
-#define nTIMIL9 0x0
#define TIMIL10 0x4 /* Timer 10 Interrupt */
-#define nTIMIL10 0x0
#define TOVF_ERR8 0x10 /* Timer 8 Counter Overflow */
-#define nTOVF_ERR8 0x0
#define TOVF_ERR9 0x20 /* Timer 9 Counter Overflow */
-#define nTOVF_ERR9 0x0
#define TOVF_ERR10 0x40 /* Timer 10 Counter Overflow */
-#define nTOVF_ERR10 0x0
#define TRUN8 0x1000 /* Timer 8 Slave Enable Status */
-#define nTRUN8 0x0
#define TRUN9 0x2000 /* Timer 9 Slave Enable Status */
-#define nTRUN9 0x0
#define TRUN10 0x4000 /* Timer 10 Slave Enable Status */
-#define nTRUN10 0x0
/* Bit masks for EPPI0 are obtained from common base header for EPPIx (EPPI1 and EPPI2) */
/* Bit masks for USB_POWER */
#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
-#define nENABLE_SUSPENDM 0x0
#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
-#define nSUSPEND_MODE 0x0
#define RESUME_MODE 0x4 /* DMA Mode */
-#define nRESUME_MODE 0x0
#define RESET 0x8 /* Reset indicator */
-#define nRESET 0x0
#define HS_MODE 0x10 /* High Speed mode indicator */
-#define nHS_MODE 0x0
#define HS_ENABLE 0x20 /* high Speed Enable */
-#define nHS_ENABLE 0x0
#define SOFT_CONN 0x40 /* Soft connect */
-#define nSOFT_CONN 0x0
#define ISO_UPDATE 0x80 /* Isochronous update */
-#define nISO_UPDATE 0x0
/* Bit masks for USB_INTRTX */
#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
-#define nEP0_TX 0x0
#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
-#define nEP1_TX 0x0
#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
-#define nEP2_TX 0x0
#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
-#define nEP3_TX 0x0
#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
-#define nEP4_TX 0x0
#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
-#define nEP5_TX 0x0
#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
-#define nEP6_TX 0x0
#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
-#define nEP7_TX 0x0
/* Bit masks for USB_INTRRX */
#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
-#define nEP1_RX 0x0
#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
-#define nEP2_RX 0x0
#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
-#define nEP3_RX 0x0
#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
-#define nEP4_RX 0x0
#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
-#define nEP5_RX 0x0
#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
-#define nEP6_RX 0x0
#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
-#define nEP7_RX 0x0
/* Bit masks for USB_INTRTXE */
#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
-#define nEP0_TX_E 0x0
#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
-#define nEP1_TX_E 0x0
#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
-#define nEP2_TX_E 0x0
#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
-#define nEP3_TX_E 0x0
#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
-#define nEP4_TX_E 0x0
#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
-#define nEP5_TX_E 0x0
#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
-#define nEP6_TX_E 0x0
#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
-#define nEP7_TX_E 0x0
/* Bit masks for USB_INTRRXE */
#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
-#define nEP1_RX_E 0x0
#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
-#define nEP2_RX_E 0x0
#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
-#define nEP3_RX_E 0x0
#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
-#define nEP4_RX_E 0x0
#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
-#define nEP5_RX_E 0x0
#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
-#define nEP6_RX_E 0x0
#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
-#define nEP7_RX_E 0x0
/* Bit masks for USB_INTRUSB */
#define SUSPEND_B 0x1 /* Suspend indicator */
-#define nSUSPEND_B 0x0
#define RESUME_B 0x2 /* Resume indicator */
-#define nRESUME_B 0x0
#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
-#define nRESET_OR_BABLE_B 0x0
#define SOF_B 0x8 /* Start of frame */
-#define nSOF_B 0x0
#define CONN_B 0x10 /* Connection indicator */
-#define nCONN_B 0x0
#define DISCON_B 0x20 /* Disconnect indicator */
-#define nDISCON_B 0x0
#define SESSION_REQ_B 0x40 /* Session Request */
-#define nSESSION_REQ_B 0x0
#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
-#define nVBUS_ERROR_B 0x0
/* Bit masks for USB_INTRUSBE */
#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
-#define nSUSPEND_BE 0x0
#define RESUME_BE 0x2 /* Resume indicator int enable */
-#define nRESUME_BE 0x0
#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
-#define nRESET_OR_BABLE_BE 0x0
#define SOF_BE 0x8 /* Start of frame int enable */
-#define nSOF_BE 0x0
#define CONN_BE 0x10 /* Connection indicator int enable */
-#define nCONN_BE 0x0
#define DISCON_BE 0x20 /* Disconnect indicator int enable */
-#define nDISCON_BE 0x0
#define SESSION_REQ_BE 0x40 /* Session Request int enable */
-#define nSESSION_REQ_BE 0x0
#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
-#define nVBUS_ERROR_BE 0x0
/* Bit masks for USB_FRAME */
/* Bit masks for USB_GLOBAL_CTL */
#define GLOBAL_ENA 0x1 /* enables USB module */
-#define nGLOBAL_ENA 0x0
#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
-#define nEP1_TX_ENA 0x0
#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
-#define nEP2_TX_ENA 0x0
#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
-#define nEP3_TX_ENA 0x0
#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
-#define nEP4_TX_ENA 0x0
#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
-#define nEP5_TX_ENA 0x0
#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
-#define nEP6_TX_ENA 0x0
#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
-#define nEP7_TX_ENA 0x0
#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
-#define nEP1_RX_ENA 0x0
#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
-#define nEP2_RX_ENA 0x0
#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
-#define nEP3_RX_ENA 0x0
#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
-#define nEP4_RX_ENA 0x0
#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
-#define nEP5_RX_ENA 0x0
#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
-#define nEP6_RX_ENA 0x0
#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
-#define nEP7_RX_ENA 0x0
/* Bit masks for USB_OTG_DEV_CTL */
#define SESSION 0x1 /* session indicator */
-#define nSESSION 0x0
#define HOST_REQ 0x2 /* Host negotiation request */
-#define nHOST_REQ 0x0
#define HOST_MODE 0x4 /* indicates USBDRC is a host */
-#define nHOST_MODE 0x0
#define VBUS0 0x8 /* Vbus level indicator[0] */
-#define nVBUS0 0x0
#define VBUS1 0x10 /* Vbus level indicator[1] */
-#define nVBUS1 0x0
#define LSDEV 0x20 /* Low-speed indicator */
-#define nLSDEV 0x0
#define FSDEV 0x40 /* Full or High-speed indicator */
-#define nFSDEV 0x0
#define B_DEVICE 0x80 /* A' or 'B' device indicator */
-#define nB_DEVICE 0x0
/* Bit masks for USB_OTG_VBUS_IRQ */
#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
-#define nDRIVE_VBUS_ON 0x0
#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
-#define nDRIVE_VBUS_OFF 0x0
#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
-#define nCHRG_VBUS_START 0x0
#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
-#define nCHRG_VBUS_END 0x0
#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
-#define nDISCHRG_VBUS_START 0x0
#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
-#define nDISCHRG_VBUS_END 0x0
/* Bit masks for USB_OTG_VBUS_MASK */
#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
-#define nDRIVE_VBUS_ON_ENA 0x0
#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
-#define nDRIVE_VBUS_OFF_ENA 0x0
#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
-#define nCHRG_VBUS_START_ENA 0x0
#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
-#define nCHRG_VBUS_END_ENA 0x0
#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
-#define nDISCHRG_VBUS_START_ENA 0x0
#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
-#define nDISCHRG_VBUS_END_ENA 0x0
/* Bit masks for USB_CSR0 */
#define RXPKTRDY 0x1 /* data packet receive indicator */
-#define nRXPKTRDY 0x0
#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
-#define nTXPKTRDY 0x0
#define STALL_SENT 0x4 /* STALL handshake sent */
-#define nSTALL_SENT 0x0
#define DATAEND 0x8 /* Data end indicator */
-#define nDATAEND 0x0
#define SETUPEND 0x10 /* Setup end */
-#define nSETUPEND 0x0
#define SENDSTALL 0x20 /* Send STALL handshake */
-#define nSENDSTALL 0x0
#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
-#define nSERVICED_RXPKTRDY 0x0
#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
-#define nSERVICED_SETUPEND 0x0
#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
-#define nFLUSHFIFO 0x0
#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
-#define nSTALL_RECEIVED_H 0x0
#define SETUPPKT_H 0x8 /* send Setup token host mode */
-#define nSETUPPKT_H 0x0
#define ERROR_H 0x10 /* timeout error indicator host mode */
-#define nERROR_H 0x0
#define REQPKT_H 0x20 /* Request an IN transaction host mode */
-#define nREQPKT_H 0x0
#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
-#define nSTATUSPKT_H 0x0
#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
-#define nNAK_TIMEOUT_H 0x0
/* Bit masks for USB_COUNT0 */
/* Bit masks for USB_TXCSR */
#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
-#define nTXPKTRDY_T 0x0
#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
-#define nFIFO_NOT_EMPTY_T 0x0
#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
-#define nUNDERRUN_T 0x0
#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
-#define nFLUSHFIFO_T 0x0
#define STALL_SEND_T 0x10 /* issue a Stall handshake */
-#define nSTALL_SEND_T 0x0
#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
-#define nSTALL_SENT_T 0x0
#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_T 0x0
#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
-#define nINCOMPTX_T 0x0
#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_T 0x0
#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
-#define nFORCE_DATATOGGLE_T 0x0
#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_T 0x0
#define ISO_T 0x4000 /* enable Isochronous transfers */
-#define nISO_T 0x0
#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOSET_T 0x0
#define ERROR_TH 0x4 /* error condition host mode */
-#define nERROR_TH 0x0
#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_TH 0x0
#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
-#define nNAK_TIMEOUT_TH 0x0
/* Bit masks for USB_TXCOUNT */
/* Bit masks for USB_RXCSR */
#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
-#define nRXPKTRDY_R 0x0
#define FIFO_FULL_R 0x2 /* FIFO not empty */
-#define nFIFO_FULL_R 0x0
#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
-#define nOVERRUN_R 0x0
#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
-#define nDATAERROR_R 0x0
#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
-#define nFLUSHFIFO_R 0x0
#define STALL_SEND_R 0x20 /* issue a Stall handshake */
-#define nSTALL_SEND_R 0x0
#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
-#define nSTALL_SENT_R 0x0
#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_R 0x0
#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
-#define nINCOMPRX_R 0x0
#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_R 0x0
#define DISNYET_R 0x1000 /* disable Nyet handshakes */
-#define nDISNYET_R 0x0
#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_R 0x0
#define ISO_R 0x4000 /* enable Isochronous transfers */
-#define nISO_R 0x0
#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOCLEAR_R 0x0
#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
-#define nERROR_RH 0x0
#define REQPKT_RH 0x20 /* request an IN transaction host mode */
-#define nREQPKT_RH 0x0
#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_RH 0x0
#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
-#define nINCOMPRX_RH 0x0
#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
-#define nDMAREQMODE_RH 0x0
#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
-#define nAUTOREQ_RH 0x0
/* Bit masks for USB_RXCOUNT */
/* Bit masks for USB_DMA_INTERRUPT */
#define DMA0_INT 0x1 /* DMA0 pending interrupt */
-#define nDMA0_INT 0x0
#define DMA1_INT 0x2 /* DMA1 pending interrupt */
-#define nDMA1_INT 0x0
#define DMA2_INT 0x4 /* DMA2 pending interrupt */
-#define nDMA2_INT 0x0
#define DMA3_INT 0x8 /* DMA3 pending interrupt */
-#define nDMA3_INT 0x0
#define DMA4_INT 0x10 /* DMA4 pending interrupt */
-#define nDMA4_INT 0x0
#define DMA5_INT 0x20 /* DMA5 pending interrupt */
-#define nDMA5_INT 0x0
#define DMA6_INT 0x40 /* DMA6 pending interrupt */
-#define nDMA6_INT 0x0
#define DMA7_INT 0x80 /* DMA7 pending interrupt */
-#define nDMA7_INT 0x0
/* Bit masks for USB_DMAxCONTROL */
#define DMA_ENA 0x1 /* DMA enable */
-#define nDMA_ENA 0x0
#define DIRECTION 0x2 /* direction of DMA transfer */
-#define nDIRECTION 0x0
#define MODE 0x4 /* DMA Bus error */
-#define nMODE 0x0
#define INT_ENA 0x8 /* Interrupt enable */
-#define nINT_ENA 0x0
#define EPNUM 0xf0 /* EP number */
#define BUSERROR 0x100 /* DMA Bus error */
-#define nBUSERROR 0x0
/* Bit masks for USB_DMAxADDRHIGH */
/* Bit masks for HMDMAx_CONTROL */
#define HMDMAEN 0x1 /* Handshake MDMA Enable */
-#define nHMDMAEN 0x0
#define REP 0x2 /* Handshake MDMA Request Polarity */
-#define nREP 0x0
#define UTE 0x8 /* Urgency Threshold Enable */
-#define nUTE 0x0
#define OIE 0x10 /* Overflow Interrupt Enable */
-#define nOIE 0x0
#define BDIE 0x20 /* Block Done Interrupt Enable */
-#define nBDIE 0x0
#define MBDI 0x40 /* Mask Block Done Interrupt */
-#define nMBDI 0x0
#define DRQ 0x300 /* Handshake MDMA Request Type */
#define RBC 0x1000 /* Force Reload of BCOUNT */
-#define nRBC 0x0
#define PS 0x2000 /* Pin Status */
-#define nPS 0x0
#define OI 0x4000 /* Overflow Interrupt Generated */
-#define nOI 0x0
#define BDI 0x8000 /* Block Done Interrupt Generated */
-#define nBDI 0x0
/* ******************************************* */
/* MULTI BIT MACRO ENUMERATIONS */
/* Debug/MP/Emulation Registers (0xFFC00014 - 0xFFC00014) */
-#define CHIPID 0xffc00014
+#define CHIPID 0xffc00014
/* System Reset and Interrupt Controller (0xFFC00100 - 0xFFC00104) */
/* and MULTI BIT READ MACROS */
/* ********************************************************** */
+/* SIC_IMASK Masks */
+#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
+#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
+#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */
+#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */
+
+/* SIC_IWR Masks */
+#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
+#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
+#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */
+#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */
+
/* Bit masks for SIC_IAR0 */
-#define IRQ_PLL_WAKEUP 0x1 /* PLL Wakeup */
-#define nIRQ_PLL_WAKEUP 0x0
+#define PLL_WAKEUP 0x1 /* PLL Wakeup */
/* Bit masks for SIC_IWR0, SIC_IMASK0, SIC_ISR0 */
-#define IRQ_DMA0_ERR 0x2 /* DMA Controller 0 Error */
-#define nIRQ_DMA0_ERR 0x0
-#define IRQ_EPPI0_ERR 0x4 /* EPPI0 Error */
-#define nIRQ_EPPI0_ERR 0x0
-#define IRQ_SPORT0_ERR 0x8 /* SPORT0 Error */
-#define nIRQ_SPORT0_ERR 0x0
-#define IRQ_SPORT1_ERR 0x10 /* SPORT1 Error */
-#define nIRQ_SPORT1_ERR 0x0
-#define IRQ_SPI0_ERR 0x20 /* SPI0 Error */
-#define nIRQ_SPI0_ERR 0x0
-#define IRQ_UART0_ERR 0x40 /* UART0 Error */
-#define nIRQ_UART0_ERR 0x0
-#define IRQ_RTC 0x80 /* Real-Time Clock */
-#define nIRQ_RTC 0x0
-#define IRQ_DMA12 0x100 /* DMA Channel 12 */
-#define nIRQ_DMA12 0x0
-#define IRQ_DMA0 0x200 /* DMA Channel 0 */
-#define nIRQ_DMA0 0x0
-#define IRQ_DMA1 0x400 /* DMA Channel 1 */
-#define nIRQ_DMA1 0x0
-#define IRQ_DMA2 0x800 /* DMA Channel 2 */
-#define nIRQ_DMA2 0x0
-#define IRQ_DMA3 0x1000 /* DMA Channel 3 */
-#define nIRQ_DMA3 0x0
-#define IRQ_DMA4 0x2000 /* DMA Channel 4 */
-#define nIRQ_DMA4 0x0
-#define IRQ_DMA6 0x4000 /* DMA Channel 6 */
-#define nIRQ_DMA6 0x0
-#define IRQ_DMA7 0x8000 /* DMA Channel 7 */
-#define nIRQ_DMA7 0x0
-#define IRQ_PINT0 0x80000 /* Pin Interrupt 0 */
-#define nIRQ_PINT0 0x0
-#define IRQ_PINT1 0x100000 /* Pin Interrupt 1 */
-#define nIRQ_PINT1 0x0
-#define IRQ_MDMA0 0x200000 /* Memory DMA Stream 0 */
-#define nIRQ_MDMA0 0x0
-#define IRQ_MDMA1 0x400000 /* Memory DMA Stream 1 */
-#define nIRQ_MDMA1 0x0
-#define IRQ_WDOG 0x800000 /* Watchdog Timer */
-#define nIRQ_WDOG 0x0
-#define IRQ_DMA1_ERR 0x1000000 /* DMA Controller 1 Error */
-#define nIRQ_DMA1_ERR 0x0
-#define IRQ_SPORT2_ERR 0x2000000 /* SPORT2 Error */
-#define nIRQ_SPORT2_ERR 0x0
-#define IRQ_SPORT3_ERR 0x4000000 /* SPORT3 Error */
-#define nIRQ_SPORT3_ERR 0x0
-#define IRQ_MXVR_SD 0x8000000 /* MXVR Synchronous Data */
-#define nIRQ_MXVR_SD 0x0
-#define IRQ_SPI1_ERR 0x10000000 /* SPI1 Error */
-#define nIRQ_SPI1_ERR 0x0
-#define IRQ_SPI2_ERR 0x20000000 /* SPI2 Error */
-#define nIRQ_SPI2_ERR 0x0
-#define IRQ_UART1_ERR 0x40000000 /* UART1 Error */
-#define nIRQ_UART1_ERR 0x0
-#define IRQ_UART2_ERR 0x80000000 /* UART2 Error */
-#define nIRQ_UART2_ERR 0x0
+#define DMA0_ERR 0x2 /* DMA Controller 0 Error */
+#define EPPI0_ERR 0x4 /* EPPI0 Error */
+#define SPORT0_ERR 0x8 /* SPORT0 Error */
+#define SPORT1_ERR 0x10 /* SPORT1 Error */
+#define SPI0_ERR 0x20 /* SPI0 Error */
+#define UART0_ERR 0x40 /* UART0 Error */
+#define RTC 0x80 /* Real-Time Clock */
+#define DMA12 0x100 /* DMA Channel 12 */
+#define DMA0 0x200 /* DMA Channel 0 */
+#define DMA1 0x400 /* DMA Channel 1 */
+#define DMA2 0x800 /* DMA Channel 2 */
+#define DMA3 0x1000 /* DMA Channel 3 */
+#define DMA4 0x2000 /* DMA Channel 4 */
+#define DMA6 0x4000 /* DMA Channel 6 */
+#define DMA7 0x8000 /* DMA Channel 7 */
+#define PINT0 0x80000 /* Pin Interrupt 0 */
+#define PINT1 0x100000 /* Pin Interrupt 1 */
+#define MDMA0 0x200000 /* Memory DMA Stream 0 */
+#define MDMA1 0x400000 /* Memory DMA Stream 1 */
+#define WDOG 0x800000 /* Watchdog Timer */
+#define DMA1_ERR 0x1000000 /* DMA Controller 1 Error */
+#define SPORT2_ERR 0x2000000 /* SPORT2 Error */
+#define SPORT3_ERR 0x4000000 /* SPORT3 Error */
+#define MXVR_SD 0x8000000 /* MXVR Synchronous Data */
+#define SPI1_ERR 0x10000000 /* SPI1 Error */
+#define SPI2_ERR 0x20000000 /* SPI2 Error */
+#define UART1_ERR 0x40000000 /* UART1 Error */
+#define UART2_ERR 0x80000000 /* UART2 Error */
/* Bit masks for SIC_IWR1, SIC_IMASK1, SIC_ISR1 */
-#define IRQ_CAN0_ERR 0x1 /* CAN0 Error */
-#define nIRQ_CAN0_ERR 0x0
-#define IRQ_DMA18 0x2 /* DMA Channel 18 */
-#define nIRQ_DMA18 0x0
-#define IRQ_DMA19 0x4 /* DMA Channel 19 */
-#define nIRQ_DMA19 0x0
-#define IRQ_DMA20 0x8 /* DMA Channel 20 */
-#define nIRQ_DMA20 0x0
-#define IRQ_DMA21 0x10 /* DMA Channel 21 */
-#define nIRQ_DMA21 0x0
-#define IRQ_DMA13 0x20 /* DMA Channel 13 */
-#define nIRQ_DMA13 0x0
-#define IRQ_DMA14 0x40 /* DMA Channel 14 */
-#define nIRQ_DMA14 0x0
-#define IRQ_DMA5 0x80 /* DMA Channel 5 */
-#define nIRQ_DMA5 0x0
-#define IRQ_DMA23 0x100 /* DMA Channel 23 */
-#define nIRQ_DMA23 0x0
-#define IRQ_DMA8 0x200 /* DMA Channel 8 */
-#define nIRQ_DMA8 0x0
-#define IRQ_DMA9 0x400 /* DMA Channel 9 */
-#define nIRQ_DMA9 0x0
-#define IRQ_DMA10 0x800 /* DMA Channel 10 */
-#define nIRQ_DMA10 0x0
-#define IRQ_DMA11 0x1000 /* DMA Channel 11 */
-#define nIRQ_DMA11 0x0
-#define IRQ_TWI0 0x2000 /* TWI0 */
-#define nIRQ_TWI0 0x0
-#define IRQ_TWI1 0x4000 /* TWI1 */
-#define nIRQ_TWI1 0x0
-#define IRQ_CAN0_RX 0x8000 /* CAN0 Receive */
-#define nIRQ_CAN0_RX 0x0
-#define IRQ_CAN0_TX 0x10000 /* CAN0 Transmit */
-#define nIRQ_CAN0_TX 0x0
-#define IRQ_MDMA2 0x20000 /* Memory DMA Stream 0 */
-#define nIRQ_MDMA2 0x0
-#define IRQ_MDMA3 0x40000 /* Memory DMA Stream 1 */
-#define nIRQ_MDMA3 0x0
-#define IRQ_MXVR_STAT 0x80000 /* MXVR Status */
-#define nIRQ_MXVR_STAT 0x0
-#define IRQ_MXVR_CM 0x100000 /* MXVR Control Message */
-#define nIRQ_MXVR_CM 0x0
-#define IRQ_MXVR_AP 0x200000 /* MXVR Asynchronous Packet */
-#define nIRQ_MXVR_AP 0x0
-#define IRQ_EPPI1_ERR 0x400000 /* EPPI1 Error */
-#define nIRQ_EPPI1_ERR 0x0
-#define IRQ_EPPI2_ERR 0x800000 /* EPPI2 Error */
-#define nIRQ_EPPI2_ERR 0x0
-#define IRQ_UART3_ERR 0x1000000 /* UART3 Error */
-#define nIRQ_UART3_ERR 0x0
-#define IRQ_HOST_ERR 0x2000000 /* Host DMA Port Error */
-#define nIRQ_HOST_ERR 0x0
-#define IRQ_USB_ERR 0x4000000 /* USB Error */
-#define nIRQ_USB_ERR 0x0
-#define IRQ_PIXC_ERR 0x8000000 /* Pixel Compositor Error */
-#define nIRQ_PIXC_ERR 0x0
-#define IRQ_NFC_ERR 0x10000000 /* Nand Flash Controller Error */
-#define nIRQ_NFC_ERR 0x0
-#define IRQ_ATAPI_ERR 0x20000000 /* ATAPI Error */
-#define nIRQ_ATAPI_ERR 0x0
-#define IRQ_CAN1_ERR 0x40000000 /* CAN1 Error */
-#define nIRQ_CAN1_ERR 0x0
-#define IRQ_DMAR0_ERR 0x80000000 /* DMAR0 Overflow Error */
-#define nIRQ_DMAR0_ERR 0x0
-#define IRQ_DMAR1_ERR 0x80000000 /* DMAR1 Overflow Error */
-#define nIRQ_DMAR1_ERR 0x0
-#define IRQ_DMAR0 0x80000000 /* DMAR0 Block */
-#define nIRQ_DMAR0 0x0
-#define IRQ_DMAR1 0x80000000 /* DMAR1 Block */
-#define nIRQ_DMAR1 0x0
+#define CAN0_ERR 0x1 /* CAN0 Error */
+#define DMA18 0x2 /* DMA Channel 18 */
+#define DMA19 0x4 /* DMA Channel 19 */
+#define DMA20 0x8 /* DMA Channel 20 */
+#define DMA21 0x10 /* DMA Channel 21 */
+#define DMA13 0x20 /* DMA Channel 13 */
+#define DMA14 0x40 /* DMA Channel 14 */
+#define DMA5 0x80 /* DMA Channel 5 */
+#define DMA23 0x100 /* DMA Channel 23 */
+#define DMA8 0x200 /* DMA Channel 8 */
+#define DMA9 0x400 /* DMA Channel 9 */
+#define DMA10 0x800 /* DMA Channel 10 */
+#define DMA11 0x1000 /* DMA Channel 11 */
+#define TWI0 0x2000 /* TWI0 */
+#define TWI1 0x4000 /* TWI1 */
+#define CAN0_RX 0x8000 /* CAN0 Receive */
+#define CAN0_TX 0x10000 /* CAN0 Transmit */
+#define MDMA2 0x20000 /* Memory DMA Stream 0 */
+#define MDMA3 0x40000 /* Memory DMA Stream 1 */
+#define MXVR_STAT 0x80000 /* MXVR Status */
+#define MXVR_CM 0x100000 /* MXVR Control Message */
+#define MXVR_AP 0x200000 /* MXVR Asynchronous Packet */
+#define EPPI1_ERR 0x400000 /* EPPI1 Error */
+#define EPPI2_ERR 0x800000 /* EPPI2 Error */
+#define UART3_ERR 0x1000000 /* UART3 Error */
+#define HOST_ERR 0x2000000 /* Host DMA Port Error */
+#define USB_ERR 0x4000000 /* USB Error */
+#define PIXC_ERR 0x8000000 /* Pixel Compositor Error */
+#define NFC_ERR 0x10000000 /* Nand Flash Controller Error */
+#define ATAPI_ERR 0x20000000 /* ATAPI Error */
+#define CAN1_ERR 0x40000000 /* CAN1 Error */
+#define DMAR0_ERR 0x80000000 /* DMAR0 Overflow Error */
+#define DMAR1_ERR 0x80000000 /* DMAR1 Overflow Error */
+#define DMAR0 0x80000000 /* DMAR0 Block */
+#define DMAR1 0x80000000 /* DMAR1 Block */
/* Bit masks for SIC_IWR2, SIC_IMASK2, SIC_ISR2 */
-#define IRQ_DMA15 0x1 /* DMA Channel 15 */
-#define nIRQ_DMA15 0x0
-#define IRQ_DMA16 0x2 /* DMA Channel 16 */
-#define nIRQ_DMA16 0x0
-#define IRQ_DMA17 0x4 /* DMA Channel 17 */
-#define nIRQ_DMA17 0x0
-#define IRQ_DMA22 0x8 /* DMA Channel 22 */
-#define nIRQ_DMA22 0x0
-#define IRQ_CNT 0x10 /* Counter */
-#define nIRQ_CNT 0x0
-#define IRQ_KEY 0x20 /* Keypad */
-#define nIRQ_KEY 0x0
-#define IRQ_CAN1_RX 0x40 /* CAN1 Receive */
-#define nIRQ_CAN1_RX 0x0
-#define IRQ_CAN1_TX 0x80 /* CAN1 Transmit */
-#define nIRQ_CAN1_TX 0x0
-#define IRQ_SDH_MASK0 0x100 /* SDH Mask 0 */
-#define nIRQ_SDH_MASK0 0x0
-#define IRQ_SDH_MASK1 0x200 /* SDH Mask 1 */
-#define nIRQ_SDH_MASK1 0x0
-#define IRQ_USB_EINT 0x400 /* USB Exception */
-#define nIRQ_USB_EINT 0x0
-#define IRQ_USB_INT0 0x800 /* USB Interrupt 0 */
-#define nIRQ_USB_INT0 0x0
-#define IRQ_USB_INT1 0x1000 /* USB Interrupt 1 */
-#define nIRQ_USB_INT1 0x0
-#define IRQ_USB_INT2 0x2000 /* USB Interrupt 2 */
-#define nIRQ_USB_INT2 0x0
-#define IRQ_USB_DMAINT 0x4000 /* USB DMA */
-#define nIRQ_USB_DMAINT 0x0
-#define IRQ_OTPSEC 0x8000 /* OTP Access Complete */
-#define nIRQ_OTPSEC 0x0
-#define IRQ_TIMER0 0x400000 /* Timer 0 */
-#define nIRQ_TIMER0 0x0
-#define IRQ_TIMER1 0x800000 /* Timer 1 */
-#define nIRQ_TIMER1 0x0
-#define IRQ_TIMER2 0x1000000 /* Timer 2 */
-#define nIRQ_TIMER2 0x0
-#define IRQ_TIMER3 0x2000000 /* Timer 3 */
-#define nIRQ_TIMER3 0x0
-#define IRQ_TIMER4 0x4000000 /* Timer 4 */
-#define nIRQ_TIMER4 0x0
-#define IRQ_TIMER5 0x8000000 /* Timer 5 */
-#define nIRQ_TIMER5 0x0
-#define IRQ_TIMER6 0x10000000 /* Timer 6 */
-#define nIRQ_TIMER6 0x0
-#define IRQ_TIMER7 0x20000000 /* Timer 7 */
-#define nIRQ_TIMER7 0x0
-#define IRQ_PINT2 0x40000000 /* Pin Interrupt 2 */
-#define nIRQ_PINT2 0x0
-#define IRQ_PINT3 0x80000000 /* Pin Interrupt 3 */
-#define nIRQ_PINT3 0x0
+#define DMA15 0x1 /* DMA Channel 15 */
+#define DMA16 0x2 /* DMA Channel 16 */
+#define DMA17 0x4 /* DMA Channel 17 */
+#define DMA22 0x8 /* DMA Channel 22 */
+#define CNT 0x10 /* Counter */
+#define KEY 0x20 /* Keypad */
+#define CAN1_RX 0x40 /* CAN1 Receive */
+#define CAN1_TX 0x80 /* CAN1 Transmit */
+#define SDH_INT_MASK0 0x100 /* SDH Mask 0 */
+#define SDH_INT_MASK1 0x200 /* SDH Mask 1 */
+#define USB_EINT 0x400 /* USB Exception */
+#define USB_INT0 0x800 /* USB Interrupt 0 */
+#define USB_INT1 0x1000 /* USB Interrupt 1 */
+#define USB_INT2 0x2000 /* USB Interrupt 2 */
+#define USB_DMAINT 0x4000 /* USB DMA */
+#define OTPSEC 0x8000 /* OTP Access Complete */
+#define TIMER0 0x400000 /* Timer 0 */
+#define TIMER1 0x800000 /* Timer 1 */
+#define TIMER2 0x1000000 /* Timer 2 */
+#define TIMER3 0x2000000 /* Timer 3 */
+#define TIMER4 0x4000000 /* Timer 4 */
+#define TIMER5 0x8000000 /* Timer 5 */
+#define TIMER6 0x10000000 /* Timer 6 */
+#define TIMER7 0x20000000 /* Timer 7 */
+#define PINT2 0x40000000 /* Pin Interrupt 2 */
+#define PINT3 0x80000000 /* Pin Interrupt 3 */
/* Bit masks for DMAx_CONFIG, MDMA_Sx_CONFIG, MDMA_Dx_CONFIG */
#define DMAEN 0x1 /* DMA Channel Enable */
-#define nDMAEN 0x0
#define WNR 0x2 /* DMA Direction */
-#define nWNR 0x0
-#define WDSIZE 0xc /* Transfer Word Size */
+#define WDSIZE_8 0x0 /* Transfer Word Size = 8 */
+#define WDSIZE_16 0x4 /* Transfer Word Size = 16 */
+#define WDSIZE_32 0x8 /* Transfer Word Size = 32 */
#define DMA2D 0x10 /* DMA Mode */
-#define nDMA2D 0x0
#define RESTART 0x20 /* Work Unit Transitions */
-#define nRESTART 0x0
#define DI_SEL 0x40 /* Data Interrupt Timing Select */
-#define nDI_SEL 0x0
#define DI_EN 0x80 /* Data Interrupt Enable */
-#define nDI_EN 0x0
#define NDSIZE 0xf00 /* Flex Descriptor Size */
#define DMAFLOW 0xf000 /* Next Operation */
/* Bit masks for DMAx_IRQ_STATUS, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
#define DMA_DONE 0x1 /* DMA Completion Interrupt Status */
-#define nDMA_DONE 0x0
#define DMA_ERR 0x2 /* DMA Error Interrupt Status */
-#define nDMA_ERR 0x0
#define DFETCH 0x4 /* DMA Descriptor Fetch */
-#define nDFETCH 0x0
#define DMA_RUN 0x8 /* DMA Channel Running */
-#define nDMA_RUN 0x0
/* Bit masks for DMAx_PERIPHERAL_MAP, MDMA_Sx_IRQ_STATUS, MDMA_Dx_IRQ_STATUS */
#define CTYPE 0x40 /* DMA Channel Type */
-#define nCTYPE 0x0
#define PMAP 0xf000 /* Peripheral Mapped To This Channel */
/* Bit masks for DMACx_TCPER */
/* Bit masks for DMAC1_PERIMUX */
#define PMUXSDH 0x1 /* Peripheral Select for DMA22 channel */
-#define nPMUXSDH 0x0
-/* Bit masks for EBIU_AMGCTL */
+/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS *************************/
+/* EBIU_AMGCTL Masks */
+#define AMCKEN 0x0001 /* Enable CLKOUT */
+#define AMBEN_NONE 0x0000 /* All Banks Disabled */
+#define AMBEN_B0 0x0002 /* Enable Async Memory Bank 0 only */
+#define AMBEN_B0_B1 0x0004 /* Enable Async Memory Banks 0 & 1 only */
+#define AMBEN_B0_B1_B2 0x0006 /* Enable Async Memory Banks 0, 1, and 2 */
+#define AMBEN_ALL 0x0008 /* Enable Async Memory Banks (all) 0, 1, 2, and 3 */
-#define AMCKEN 0x1 /* Async Memory Enable */
-#define nAMCKEN 0x0
-#define AMBEN 0xe /* Async bank enable */
/* Bit masks for EBIU_AMBCTL0 */
#define B0RDYEN 0x1 /* Bank 0 ARDY Enable */
-#define nB0RDYEN 0x0
#define B0RDYPOL 0x2 /* Bank 0 ARDY Polarity */
-#define nB0RDYPOL 0x0
#define B0TT 0xc /* Bank 0 transition time */
#define B0ST 0x30 /* Bank 0 Setup time */
#define B0HT 0xc0 /* Bank 0 Hold time */
#define B0RAT 0xf00 /* Bank 0 Read access time */
#define B0WAT 0xf000 /* Bank 0 write access time */
#define B1RDYEN 0x10000 /* Bank 1 ARDY Enable */
-#define nB1RDYEN 0x0
#define B1RDYPOL 0x20000 /* Bank 1 ARDY Polarity */
-#define nB1RDYPOL 0x0
#define B1TT 0xc0000 /* Bank 1 transition time */
#define B1ST 0x300000 /* Bank 1 Setup time */
#define B1HT 0xc00000 /* Bank 1 Hold time */
/* Bit masks for EBIU_AMBCTL1 */
#define B2RDYEN 0x1 /* Bank 2 ARDY Enable */
-#define nB2RDYEN 0x0
#define B2RDYPOL 0x2 /* Bank 2 ARDY Polarity */
-#define nB2RDYPOL 0x0
#define B2TT 0xc /* Bank 2 transition time */
#define B2ST 0x30 /* Bank 2 Setup time */
#define B2HT 0xc0 /* Bank 2 Hold time */
#define B2RAT 0xf00 /* Bank 2 Read access time */
#define B2WAT 0xf000 /* Bank 2 write access time */
#define B3RDYEN 0x10000 /* Bank 3 ARDY Enable */
-#define nB3RDYEN 0x0
#define B3RDYPOL 0x20000 /* Bank 3 ARDY Polarity */
-#define nB3RDYPOL 0x0
#define B3TT 0xc0000 /* Bank 3 transition time */
#define B3ST 0x300000 /* Bank 3 Setup time */
#define B3HT 0xc00000 /* Bank 3 Hold time */
/* Bit masks for EBIU_FCTL */
#define TESTSETLOCK 0x1 /* Test set lock */
-#define nTESTSETLOCK 0x0
#define BCLK 0x6 /* Burst clock frequency */
#define PGWS 0x38 /* Page wait states */
#define PGSZ 0x40 /* Page size */
-#define nPGSZ 0x0
#define RDDL 0x380 /* Read data delay */
/* Bit masks for EBIU_ARBSTAT */
#define ARBSTAT 0x1 /* Arbitration status */
-#define nARBSTAT 0x0
#define BGSTAT 0x2 /* Bus grant status */
-#define nBGSTAT 0x0
/* Bit masks for EBIU_DDRCTL0 */
#define BURSTLENGTH 0x7 /* Burst length */
#define CASLATENCY 0x70 /* CAS latency */
#define DLLRESET 0x100 /* DLL Reset */
-#define nDLLRESET 0x0
#define REGE 0x1000 /* Register mode enable */
-#define nREGE 0x0
/* Bit masks for EBIU_DDRCTL3 */
#define DEB3_PFLEN 0x30 /* Pre fetch length for DEB3 accesses */
#define DEB_ARB_PRIORITY 0x700 /* Arbitration between DEB busses */
#define DEB1_URGENT 0x1000 /* DEB1 Urgent */
-#define nDEB1_URGENT 0x0
#define DEB2_URGENT 0x2000 /* DEB2 Urgent */
-#define nDEB2_URGENT 0x0
#define DEB3_URGENT 0x4000 /* DEB3 Urgent */
-#define nDEB3_URGENT 0x0
/* Bit masks for EBIU_ERRMST */
#define DEB1_ERROR 0x1 /* DEB1 Error */
-#define nDEB1_ERROR 0x0
#define DEB2_ERROR 0x2 /* DEB2 Error */
-#define nDEB2_ERROR 0x0
#define DEB3_ERROR 0x4 /* DEB3 Error */
-#define nDEB3_ERROR 0x0
#define CORE_ERROR 0x8 /* Core error */
-#define nCORE_ERROR 0x0
#define DEB_MERROR 0x10 /* DEB1 Error (2nd) */
-#define nDEB_MERROR 0x0
#define DEB2_MERROR 0x20 /* DEB2 Error (2nd) */
-#define nDEB2_MERROR 0x0
#define DEB3_MERROR 0x40 /* DEB3 Error (2nd) */
-#define nDEB3_MERROR 0x0
#define CORE_MERROR 0x80 /* Core Error (2nd) */
-#define nCORE_MERROR 0x0
/* Bit masks for EBIU_ERRADD */
/* Bit masks for EBIU_RSTCTL */
#define DDRSRESET 0x1 /* DDR soft reset */
-#define nDDRSRESET 0x0
#define PFTCHSRESET 0x4 /* DDR prefetch reset */
-#define nPFTCHSRESET 0x0
#define SRREQ 0x8 /* Self-refresh request */
-#define nSRREQ 0x0
#define SRACK 0x10 /* Self-refresh acknowledge */
-#define nSRACK 0x0
#define MDDRENABLE 0x20 /* Mobile DDR enable */
-#define nMDDRENABLE 0x0
/* Bit masks for EBIU_DDRBRC0 */
/* Bit masks for EBIU_DDRMCEN */
#define B0WCENABLE 0x1 /* Bank 0 write count enable */
-#define nB0WCENABLE 0x0
#define B1WCENABLE 0x2 /* Bank 1 write count enable */
-#define nB1WCENABLE 0x0
#define B2WCENABLE 0x4 /* Bank 2 write count enable */
-#define nB2WCENABLE 0x0
#define B3WCENABLE 0x8 /* Bank 3 write count enable */
-#define nB3WCENABLE 0x0
#define B4WCENABLE 0x10 /* Bank 4 write count enable */
-#define nB4WCENABLE 0x0
#define B5WCENABLE 0x20 /* Bank 5 write count enable */
-#define nB5WCENABLE 0x0
#define B6WCENABLE 0x40 /* Bank 6 write count enable */
-#define nB6WCENABLE 0x0
#define B7WCENABLE 0x80 /* Bank 7 write count enable */
-#define nB7WCENABLE 0x0
#define B0RCENABLE 0x100 /* Bank 0 read count enable */
-#define nB0RCENABLE 0x0
#define B1RCENABLE 0x200 /* Bank 1 read count enable */
-#define nB1RCENABLE 0x0
#define B2RCENABLE 0x400 /* Bank 2 read count enable */
-#define nB2RCENABLE 0x0
#define B3RCENABLE 0x800 /* Bank 3 read count enable */
-#define nB3RCENABLE 0x0
#define B4RCENABLE 0x1000 /* Bank 4 read count enable */
-#define nB4RCENABLE 0x0
#define B5RCENABLE 0x2000 /* Bank 5 read count enable */
-#define nB5RCENABLE 0x0
#define B6RCENABLE 0x4000 /* Bank 6 read count enable */
-#define nB6RCENABLE 0x0
#define B7RCENABLE 0x8000 /* Bank 7 read count enable */
-#define nB7RCENABLE 0x0
#define ROWACTCENABLE 0x10000 /* DDR Row activate count enable */
-#define nROWACTCENABLE 0x0
#define RWTCENABLE 0x20000 /* DDR R/W Turn around count enable */
-#define nRWTCENABLE 0x0
#define ARCENABLE 0x40000 /* DDR Auto-refresh count enable */
-#define nARCENABLE 0x0
#define GC0ENABLE 0x100000 /* DDR Grant count 0 enable */
-#define nGC0ENABLE 0x0
#define GC1ENABLE 0x200000 /* DDR Grant count 1 enable */
-#define nGC1ENABLE 0x0
#define GC2ENABLE 0x400000 /* DDR Grant count 2 enable */
-#define nGC2ENABLE 0x0
#define GC3ENABLE 0x800000 /* DDR Grant count 3 enable */
-#define nGC3ENABLE 0x0
#define GCCONTROL 0x3000000 /* DDR Grant Count Control */
/* Bit masks for EBIU_DDRMCCL */
#define CB0WCOUNT 0x1 /* Clear write count 0 */
-#define nCB0WCOUNT 0x0
#define CB1WCOUNT 0x2 /* Clear write count 1 */
-#define nCB1WCOUNT 0x0
#define CB2WCOUNT 0x4 /* Clear write count 2 */
-#define nCB2WCOUNT 0x0
#define CB3WCOUNT 0x8 /* Clear write count 3 */
-#define nCB3WCOUNT 0x0
#define CB4WCOUNT 0x10 /* Clear write count 4 */
-#define nCB4WCOUNT 0x0
#define CB5WCOUNT 0x20 /* Clear write count 5 */
-#define nCB5WCOUNT 0x0
#define CB6WCOUNT 0x40 /* Clear write count 6 */
-#define nCB6WCOUNT 0x0
#define CB7WCOUNT 0x80 /* Clear write count 7 */
-#define nCB7WCOUNT 0x0
#define CBRCOUNT 0x100 /* Clear read count 0 */
-#define nCBRCOUNT 0x0
#define CB1RCOUNT 0x200 /* Clear read count 1 */
-#define nCB1RCOUNT 0x0
#define CB2RCOUNT 0x400 /* Clear read count 2 */
-#define nCB2RCOUNT 0x0
#define CB3RCOUNT 0x800 /* Clear read count 3 */
-#define nCB3RCOUNT 0x0
#define CB4RCOUNT 0x1000 /* Clear read count 4 */
-#define nCB4RCOUNT 0x0
#define CB5RCOUNT 0x2000 /* Clear read count 5 */
-#define nCB5RCOUNT 0x0
#define CB6RCOUNT 0x4000 /* Clear read count 6 */
-#define nCB6RCOUNT 0x0
#define CB7RCOUNT 0x8000 /* Clear read count 7 */
-#define nCB7RCOUNT 0x0
#define CRACOUNT 0x10000 /* Clear row activation count */
-#define nCRACOUNT 0x0
#define CRWTACOUNT 0x20000 /* Clear R/W turn-around count */
-#define nCRWTACOUNT 0x0
#define CARCOUNT 0x40000 /* Clear auto-refresh count */
-#define nCARCOUNT 0x0
#define CG0COUNT 0x100000 /* Clear grant count 0 */
-#define nCG0COUNT 0x0
#define CG1COUNT 0x200000 /* Clear grant count 1 */
-#define nCG1COUNT 0x0
#define CG2COUNT 0x400000 /* Clear grant count 2 */
-#define nCG2COUNT 0x0
#define CG3COUNT 0x800000 /* Clear grant count 3 */
-#define nCG3COUNT 0x0
/* Bit masks for (PORTx is PORTA - PORTJ) includes PORTx_FER, PORTx_SET, PORTx_CLEAR, PORTx_DIR_SET, PORTx_DIR_CLEAR, PORTx_INEN */
#define Px0 0x1 /* GPIO 0 */
-#define nPx0 0x0
#define Px1 0x2 /* GPIO 1 */
-#define nPx1 0x0
#define Px2 0x4 /* GPIO 2 */
-#define nPx2 0x0
#define Px3 0x8 /* GPIO 3 */
-#define nPx3 0x0
#define Px4 0x10 /* GPIO 4 */
-#define nPx4 0x0
#define Px5 0x20 /* GPIO 5 */
-#define nPx5 0x0
#define Px6 0x40 /* GPIO 6 */
-#define nPx6 0x0
#define Px7 0x80 /* GPIO 7 */
-#define nPx7 0x0
#define Px8 0x100 /* GPIO 8 */
-#define nPx8 0x0
#define Px9 0x200 /* GPIO 9 */
-#define nPx9 0x0
#define Px10 0x400 /* GPIO 10 */
-#define nPx10 0x0
#define Px11 0x800 /* GPIO 11 */
-#define nPx11 0x0
#define Px12 0x1000 /* GPIO 12 */
-#define nPx12 0x0
#define Px13 0x2000 /* GPIO 13 */
-#define nPx13 0x0
#define Px14 0x4000 /* GPIO 14 */
-#define nPx14 0x0
#define Px15 0x8000 /* GPIO 15 */
-#define nPx15 0x0
/* Bit masks for PORTA_MUX - PORTJ_MUX */
/* Bit masks for PINTx_MASK_SET/CLEAR, PINTx_REQUEST, PINTx_LATCH, PINTx_EDGE_SET/CLEAR, PINTx_INVERT_SET/CLEAR, PINTx_PINTSTATE */
#define IB0 0x1 /* Interrupt Bit 0 */
-#define nIB0 0x0
#define IB1 0x2 /* Interrupt Bit 1 */
-#define nIB1 0x0
#define IB2 0x4 /* Interrupt Bit 2 */
-#define nIB2 0x0
#define IB3 0x8 /* Interrupt Bit 3 */
-#define nIB3 0x0
#define IB4 0x10 /* Interrupt Bit 4 */
-#define nIB4 0x0
#define IB5 0x20 /* Interrupt Bit 5 */
-#define nIB5 0x0
#define IB6 0x40 /* Interrupt Bit 6 */
-#define nIB6 0x0
#define IB7 0x80 /* Interrupt Bit 7 */
-#define nIB7 0x0
#define IB8 0x100 /* Interrupt Bit 8 */
-#define nIB8 0x0
#define IB9 0x200 /* Interrupt Bit 9 */
-#define nIB9 0x0
#define IB10 0x400 /* Interrupt Bit 10 */
-#define nIB10 0x0
#define IB11 0x800 /* Interrupt Bit 11 */
-#define nIB11 0x0
#define IB12 0x1000 /* Interrupt Bit 12 */
-#define nIB12 0x0
#define IB13 0x2000 /* Interrupt Bit 13 */
-#define nIB13 0x0
#define IB14 0x4000 /* Interrupt Bit 14 */
-#define nIB14 0x0
#define IB15 0x8000 /* Interrupt Bit 15 */
-#define nIB15 0x0
/* Bit masks for TIMERx_CONFIG */
#define TMODE 0x3 /* Timer Mode */
#define PULSE_HI 0x4 /* Pulse Polarity */
-#define nPULSE_HI 0x0
#define PERIOD_CNT 0x8 /* Period Count */
-#define nPERIOD_CNT 0x0
#define IRQ_ENA 0x10 /* Interrupt Request Enable */
-#define nIRQ_ENA 0x0
#define TIN_SEL 0x20 /* Timer Input Select */
-#define nTIN_SEL 0x0
#define OUT_DIS 0x40 /* Output Pad Disable */
-#define nOUT_DIS 0x0
#define CLK_SEL 0x80 /* Timer Clock Select */
-#define nCLK_SEL 0x0
#define TOGGLE_HI 0x100 /* Toggle Mode */
-#define nTOGGLE_HI 0x0
#define EMU_RUN 0x200 /* Emulation Behavior Select */
-#define nEMU_RUN 0x0
#define ERR_TYP 0xc000 /* Error Type */
/* Bit masks for TIMER_ENABLE0 */
#define TIMEN0 0x1 /* Timer 0 Enable */
-#define nTIMEN0 0x0
#define TIMEN1 0x2 /* Timer 1 Enable */
-#define nTIMEN1 0x0
#define TIMEN2 0x4 /* Timer 2 Enable */
-#define nTIMEN2 0x0
#define TIMEN3 0x8 /* Timer 3 Enable */
-#define nTIMEN3 0x0
#define TIMEN4 0x10 /* Timer 4 Enable */
-#define nTIMEN4 0x0
#define TIMEN5 0x20 /* Timer 5 Enable */
-#define nTIMEN5 0x0
#define TIMEN6 0x40 /* Timer 6 Enable */
-#define nTIMEN6 0x0
#define TIMEN7 0x80 /* Timer 7 Enable */
-#define nTIMEN7 0x0
/* Bit masks for TIMER_DISABLE0 */
#define TIMDIS0 0x1 /* Timer 0 Disable */
-#define nTIMDIS0 0x0
#define TIMDIS1 0x2 /* Timer 1 Disable */
-#define nTIMDIS1 0x0
#define TIMDIS2 0x4 /* Timer 2 Disable */
-#define nTIMDIS2 0x0
#define TIMDIS3 0x8 /* Timer 3 Disable */
-#define nTIMDIS3 0x0
#define TIMDIS4 0x10 /* Timer 4 Disable */
-#define nTIMDIS4 0x0
#define TIMDIS5 0x20 /* Timer 5 Disable */
-#define nTIMDIS5 0x0
#define TIMDIS6 0x40 /* Timer 6 Disable */
-#define nTIMDIS6 0x0
#define TIMDIS7 0x80 /* Timer 7 Disable */
-#define nTIMDIS7 0x0
/* Bit masks for TIMER_STATUS0 */
#define TIMIL0 0x1 /* Timer 0 Interrupt */
-#define nTIMIL0 0x0
#define TIMIL1 0x2 /* Timer 1 Interrupt */
-#define nTIMIL1 0x0
#define TIMIL2 0x4 /* Timer 2 Interrupt */
-#define nTIMIL2 0x0
#define TIMIL3 0x8 /* Timer 3 Interrupt */
-#define nTIMIL3 0x0
#define TOVF_ERR0 0x10 /* Timer 0 Counter Overflow */
-#define nTOVF_ERR0 0x0
#define TOVF_ERR1 0x20 /* Timer 1 Counter Overflow */
-#define nTOVF_ERR1 0x0
#define TOVF_ERR2 0x40 /* Timer 2 Counter Overflow */
-#define nTOVF_ERR2 0x0
#define TOVF_ERR3 0x80 /* Timer 3 Counter Overflow */
-#define nTOVF_ERR3 0x0
#define TRUN0 0x1000 /* Timer 0 Slave Enable Status */
-#define nTRUN0 0x0
#define TRUN1 0x2000 /* Timer 1 Slave Enable Status */
-#define nTRUN1 0x0
#define TRUN2 0x4000 /* Timer 2 Slave Enable Status */
-#define nTRUN2 0x0
#define TRUN3 0x8000 /* Timer 3 Slave Enable Status */
-#define nTRUN3 0x0
#define TIMIL4 0x10000 /* Timer 4 Interrupt */
-#define nTIMIL4 0x0
#define TIMIL5 0x20000 /* Timer 5 Interrupt */
-#define nTIMIL5 0x0
#define TIMIL6 0x40000 /* Timer 6 Interrupt */
-#define nTIMIL6 0x0
#define TIMIL7 0x80000 /* Timer 7 Interrupt */
-#define nTIMIL7 0x0
#define TOVF_ERR4 0x100000 /* Timer 4 Counter Overflow */
-#define nTOVF_ERR4 0x0
#define TOVF_ERR5 0x200000 /* Timer 5 Counter Overflow */
-#define nTOVF_ERR5 0x0
#define TOVF_ERR6 0x400000 /* Timer 6 Counter Overflow */
-#define nTOVF_ERR6 0x0
#define TOVF_ERR7 0x800000 /* Timer 7 Counter Overflow */
-#define nTOVF_ERR7 0x0
#define TRUN4 0x10000000 /* Timer 4 Slave Enable Status */
-#define nTRUN4 0x0
#define TRUN5 0x20000000 /* Timer 5 Slave Enable Status */
-#define nTRUN5 0x0
#define TRUN6 0x40000000 /* Timer 6 Slave Enable Status */
-#define nTRUN6 0x0
#define TRUN7 0x80000000 /* Timer 7 Slave Enable Status */
-#define nTRUN7 0x0
/* Bit masks for WDOG_CTL */
#define WDEV 0x6 /* Watchdog Event */
#define WDEN 0xff0 /* Watchdog Enable */
#define WDRO 0x8000 /* Watchdog Rolled Over */
-#define nWDRO 0x0
/* Bit masks for CNT_CONFIG */
#define CNTE 0x1 /* Counter Enable */
-#define nCNTE 0x0
#define DEBE 0x2 /* Debounce Enable */
-#define nDEBE 0x0
#define CDGINV 0x10 /* CDG Pin Polarity Invert */
-#define nCDGINV 0x0
#define CUDINV 0x20 /* CUD Pin Polarity Invert */
-#define nCUDINV 0x0
#define CZMINV 0x40 /* CZM Pin Polarity Invert */
-#define nCZMINV 0x0
#define CNTMODE 0x700 /* Counter Operating Mode */
#define ZMZC 0x800 /* CZM Zeroes Counter Enable */
-#define nZMZC 0x0
#define BNDMODE 0x3000 /* Boundary register Mode */
#define INPDIS 0x8000 /* CUG and CDG Input Disable */
-#define nINPDIS 0x0
/* Bit masks for CNT_IMASK */
#define ICIE 0x1 /* Illegal Gray/Binary Code Interrupt Enable */
-#define nICIE 0x0
#define UCIE 0x2 /* Up count Interrupt Enable */
-#define nUCIE 0x0
#define DCIE 0x4 /* Down count Interrupt Enable */
-#define nDCIE 0x0
#define MINCIE 0x8 /* Min Count Interrupt Enable */
-#define nMINCIE 0x0
#define MAXCIE 0x10 /* Max Count Interrupt Enable */
-#define nMAXCIE 0x0
#define COV31IE 0x20 /* Bit 31 Overflow Interrupt Enable */
-#define nCOV31IE 0x0
#define COV15IE 0x40 /* Bit 15 Overflow Interrupt Enable */
-#define nCOV15IE 0x0
#define CZEROIE 0x80 /* Count to Zero Interrupt Enable */
-#define nCZEROIE 0x0
#define CZMIE 0x100 /* CZM Pin Interrupt Enable */
-#define nCZMIE 0x0
#define CZMEIE 0x200 /* CZM Error Interrupt Enable */
-#define nCZMEIE 0x0
#define CZMZIE 0x400 /* CZM Zeroes Counter Interrupt Enable */
-#define nCZMZIE 0x0
/* Bit masks for CNT_STATUS */
#define ICII 0x1 /* Illegal Gray/Binary Code Interrupt Identifier */
-#define nICII 0x0
#define UCII 0x2 /* Up count Interrupt Identifier */
-#define nUCII 0x0
#define DCII 0x4 /* Down count Interrupt Identifier */
-#define nDCII 0x0
#define MINCII 0x8 /* Min Count Interrupt Identifier */
-#define nMINCII 0x0
#define MAXCII 0x10 /* Max Count Interrupt Identifier */
-#define nMAXCII 0x0
#define COV31II 0x20 /* Bit 31 Overflow Interrupt Identifier */
-#define nCOV31II 0x0
#define COV15II 0x40 /* Bit 15 Overflow Interrupt Identifier */
-#define nCOV15II 0x0
#define CZEROII 0x80 /* Count to Zero Interrupt Identifier */
-#define nCZEROII 0x0
#define CZMII 0x100 /* CZM Pin Interrupt Identifier */
-#define nCZMII 0x0
#define CZMEII 0x200 /* CZM Error Interrupt Identifier */
-#define nCZMEII 0x0
#define CZMZII 0x400 /* CZM Zeroes Counter Interrupt Identifier */
-#define nCZMZII 0x0
/* Bit masks for CNT_COMMAND */
#define W1LMIN 0xf0 /* Load Min Register */
#define W1LMAX 0xf00 /* Load Max Register */
#define W1ZMONCE 0x1000 /* Enable CZM Clear Counter Once */
-#define nW1ZMONCE 0x0
/* Bit masks for CNT_DEBOUNCE */
/* Bit masks for RTC_ICTL */
#define STOPWATCH_INTERRUPT_ENABLE 0x1 /* Stopwatch Interrupt Enable */
-#define nSTOPWATCH_INTERRUPT_ENABLE 0x0
#define ALARM_INTERRUPT_ENABLE 0x2 /* Alarm Interrupt Enable */
-#define nALARM_INTERRUPT_ENABLE 0x0
#define SECONDS_INTERRUPT_ENABLE 0x4 /* Seconds Interrupt Enable */
-#define nSECONDS_INTERRUPT_ENABLE 0x0
#define MINUTES_INTERRUPT_ENABLE 0x8 /* Minutes Interrupt Enable */
-#define nMINUTES_INTERRUPT_ENABLE 0x0
#define HOURS_INTERRUPT_ENABLE 0x10 /* Hours Interrupt Enable */
-#define nHOURS_INTERRUPT_ENABLE 0x0
#define TWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x20 /* 24 Hours Interrupt Enable */
-#define nTWENTY_FOUR_HOURS_INTERRUPT_ENABLE 0x0
#define DAY_ALARM_INTERRUPT_ENABLE 0x40 /* Day Alarm Interrupt Enable */
-#define nDAY_ALARM_INTERRUPT_ENABLE 0x0
#define WRITE_COMPLETE_INTERRUPT_ENABLE 0x8000 /* Write Complete Interrupt Enable */
-#define nWRITE_COMPLETE_INTERRUPT_ENABLE 0x0
/* Bit masks for RTC_ISTAT */
#define STOPWATCH_EVENT_FLAG 0x1 /* Stopwatch Event Flag */
-#define nSTOPWATCH_EVENT_FLAG 0x0
#define ALARM_EVENT_FLAG 0x2 /* Alarm Event Flag */
-#define nALARM_EVENT_FLAG 0x0
#define SECONDS_EVENT_FLAG 0x4 /* Seconds Event Flag */
-#define nSECONDS_EVENT_FLAG 0x0
#define MINUTES_EVENT_FLAG 0x8 /* Minutes Event Flag */
-#define nMINUTES_EVENT_FLAG 0x0
#define HOURS_EVENT_FLAG 0x10 /* Hours Event Flag */
-#define nHOURS_EVENT_FLAG 0x0
#define TWENTY_FOUR_HOURS_EVENT_FLAG 0x20 /* 24 Hours Event Flag */
-#define nTWENTY_FOUR_HOURS_EVENT_FLAG 0x0
#define DAY_ALARM_EVENT_FLAG 0x40 /* Day Alarm Event Flag */
-#define nDAY_ALARM_EVENT_FLAG 0x0
#define WRITE_PENDING__STATUS 0x4000 /* Write Pending Status */
-#define nWRITE_PENDING__STATUS 0x0
#define WRITE_COMPLETE 0x8000 /* Write Complete */
-#define nWRITE_COMPLETE 0x0
/* Bit masks for RTC_SWCNT */
/* Bit masks for RTC_PREN */
#define PREN 0x1 /* Prescaler Enable */
-#define nPREN 0x0
/* Bit masks for OTP_CONTROL */
#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
-#define nFIEN 0x0
#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
-#define nFTESTDEC 0x0
#define FWRTEST 0x2000 /* OTP/Fuse Write Test */
-#define nFWRTEST 0x0
#define FRDEN 0x4000 /* OTP/Fuse Read Enable */
-#define nFRDEN 0x0
#define FWREN 0x8000 /* OTP/Fuse Write Enable */
-#define nFWREN 0x0
/* Bit masks for OTP_BEN */
/* Bit masks for OTP_STATUS */
#define FCOMP 0x1 /* OTP/Fuse Access Complete */
-#define nFCOMP 0x0
#define FERROR 0x2 /* OTP/Fuse Access Error */
-#define nFERROR 0x0
#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
-#define nMMRGLOAD 0x0
#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
-#define nMMRGLOCK 0x0
#define FPGMEN 0x40 /* OTP/Fuse Program Enable */
-#define nFPGMEN 0x0
/* Bit masks for OTP_TIMING */
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */
-#define nEMUDABL 0x0
#define RSTDABL 0x2 /* Reset Disable */
-#define nRSTDABL 0x0
#define L1IDABL 0x1c /* L1 Instruction Memory Disable. */
#define L1DADABL 0xe0 /* L1 Data Bank A Memory Disable. */
#define L1DBDABL 0x700 /* L1 Data Bank B Memory Disable. */
#define DMA0OVR 0x800 /* DMA0 Memory Access Override */
-#define nDMA0OVR 0x0
#define DMA1OVR 0x1000 /* DMA1 Memory Access Override */
-#define nDMA1OVR 0x0
#define EMUOVR 0x4000 /* Emulation Override */
-#define nEMUOVR 0x0
#define OTPSEN 0x8000 /* OTP Secrets Enable. */
-#define nOTPSEN 0x0
#define L2DABL 0x70000 /* L2 Memory Disable. */
/* Bit masks for SECURE_CONTROL */
#define SECURE0 0x1 /* SECURE 0 */
-#define nSECURE0 0x0
#define SECURE1 0x2 /* SECURE 1 */
-#define nSECURE1 0x0
#define SECURE2 0x4 /* SECURE 2 */
-#define nSECURE2 0x0
#define SECURE3 0x8 /* SECURE 3 */
-#define nSECURE3 0x0
/* Bit masks for SECURE_STATUS */
#define SECMODE 0x3 /* Secured Mode Control State */
#define NMI 0x4 /* Non Maskable Interrupt */
-#define nNMI 0x0
#define AFVALID 0x8 /* Authentication Firmware Valid */
-#define nAFVALID 0x0
#define AFEXIT 0x10 /* Authentication Firmware Exit */
-#define nAFEXIT 0x0
#define SECSTAT 0xe0 /* Secure Status */
/* Bit masks for PLL_DIV */
#define MSEL 0x7e00 /* Multiplier Select */
#define BYPASS 0x100 /* PLL Bypass Enable */
-#define nBYPASS 0x0
#define OUTPUT_DELAY 0x80 /* External Memory Output Delay Enable */
-#define nOUTPUT_DELAY 0x0
#define INPUT_DELAY 0x40 /* External Memory Input Delay Enable */
-#define nINPUT_DELAY 0x0
#define PDWN 0x20 /* Power Down */
-#define nPDWN 0x0
#define STOPCK 0x8 /* Stop Clock */
-#define nSTOPCK 0x0
#define PLL_OFF 0x2 /* Disable PLL */
-#define nPLL_OFF 0x0
#define DF 0x1 /* Divide Frequency */
-#define nDF 0x0
/* Bit masks for PLL_STAT */
#define PLL_LOCKED 0x20 /* PLL Locked Status */
-#define nPLL_LOCKED 0x0
#define ACTIVE_PLLDISABLED 0x4 /* Active Mode With PLL Disabled */
-#define nACTIVE_PLLDISABLED 0x0
#define FULL_ON 0x2 /* Full-On Mode */
-#define nFULL_ON 0x0
#define ACTIVE_PLLENABLED 0x1 /* Active Mode With PLL Enabled */
-#define nACTIVE_PLLENABLED 0x0
#define RTCWS 0x400 /* RTC/Reset Wake-Up Status */
-#define nRTCWS 0x0
#define CANWS 0x800 /* CAN Wake-Up Status */
-#define nCANWS 0x0
#define USBWS 0x2000 /* USB Wake-Up Status */
-#define nUSBWS 0x0
#define KPADWS 0x4000 /* Keypad Wake-Up Status */
-#define nKPADWS 0x0
#define ROTWS 0x8000 /* Rotary Wake-Up Status */
-#define nROTWS 0x0
#define GPWS 0x1000 /* General-Purpose Wake-Up Status */
-#define nGPWS 0x0
/* Bit masks for VR_CTL */
#define GAIN 0xc /* Voltage Output Level Gain */
#define VLEV 0xf0 /* Internal Voltage Level */
#define SCKELOW 0x8000 /* Drive SCKE Low During Reset Enable */
-#define nSCKELOW 0x0
#define WAKE 0x100 /* RTC/Reset Wake-Up Enable */
-#define nWAKE 0x0
#define CANWE 0x200 /* CAN0/1 Wake-Up Enable */
-#define nCANWE 0x0
#define GPWE 0x400 /* General-Purpose Wake-Up Enable */
-#define nGPWE 0x0
#define USBWE 0x800 /* USB Wake-Up Enable */
-#define nUSBWE 0x0
#define KPADWE 0x1000 /* Keypad Wake-Up Enable */
-#define nKPADWE 0x0
#define ROTWE 0x2000 /* Rotary Wake-Up Enable */
-#define nROTWE 0x0
/* Bit masks for NFC_CTL */
#define WR_DLY 0xf /* Write Strobe Delay */
#define RD_DLY 0xf0 /* Read Strobe Delay */
#define NWIDTH 0x100 /* NAND Data Width */
-#define nNWIDTH 0x0
#define PG_SIZE 0x200 /* Page Size */
-#define nPG_SIZE 0x0
/* Bit masks for NFC_STAT */
#define NBUSY 0x1 /* Not Busy */
-#define nNBUSY 0x0
#define WB_FULL 0x2 /* Write Buffer Full */
-#define nWB_FULL 0x0
#define PG_WR_STAT 0x4 /* Page Write Pending */
-#define nPG_WR_STAT 0x0
#define PG_RD_STAT 0x8 /* Page Read Pending */
-#define nPG_RD_STAT 0x0
#define WB_EMPTY 0x10 /* Write Buffer Empty */
-#define nWB_EMPTY 0x0
/* Bit masks for NFC_IRQSTAT */
#define NBUSYIRQ 0x1 /* Not Busy IRQ */
-#define nNBUSYIRQ 0x0
#define WB_OVF 0x2 /* Write Buffer Overflow */
-#define nWB_OVF 0x0
#define WB_EDGE 0x4 /* Write Buffer Edge Detect */
-#define nWB_EDGE 0x0
#define RD_RDY 0x8 /* Read Data Ready */
-#define nRD_RDY 0x0
#define WR_DONE 0x10 /* Page Write Done */
-#define nWR_DONE 0x0
/* Bit masks for NFC_IRQMASK */
#define MASK_BUSYIRQ 0x1 /* Mask Not Busy IRQ */
-#define nMASK_BUSYIRQ 0x0
#define MASK_WBOVF 0x2 /* Mask Write Buffer Overflow */
-#define nMASK_WBOVF 0x0
#define MASK_WBEMPTY 0x4 /* Mask Write Buffer Empty */
-#define nMASK_WBEMPTY 0x0
#define MASK_RDRDY 0x8 /* Mask Read Data Ready */
-#define nMASK_RDRDY 0x0
#define MASK_WRDONE 0x10 /* Mask Write Done */
-#define nMASK_WRDONE 0x0
/* Bit masks for NFC_RST */
#define ECC_RST 0x1 /* ECC (and NFC counters) Reset */
-#define nECC_RST 0x0
/* Bit masks for NFC_PGCTL */
#define PG_RD_START 0x1 /* Page Read Start */
-#define nPG_RD_START 0x0
#define PG_WR_START 0x2 /* Page Write Start */
-#define nPG_WR_START 0x0
/* Bit masks for NFC_ECC0 */
/* Bit masks for CAN0_CONTROL */
#define SRS 0x1 /* Software Reset */
-#define nSRS 0x0
#define DNM 0x2 /* DeviceNet Mode */
-#define nDNM 0x0
#define ABO 0x4 /* Auto Bus On */
-#define nABO 0x0
#define WBA 0x10 /* Wakeup On CAN Bus Activity */
-#define nWBA 0x0
#define SMR 0x20 /* Sleep Mode Request */
-#define nSMR 0x0
#define CSR 0x40 /* CAN Suspend Mode Request */
-#define nCSR 0x0
#define CCR 0x80 /* CAN Configuration Mode Request */
-#define nCCR 0x0
/* Bit masks for CAN0_STATUS */
#define WT 0x1 /* CAN Transmit Warning Flag */
-#define nWT 0x0
#define WR 0x2 /* CAN Receive Warning Flag */
-#define nWR 0x0
#define EP 0x4 /* CAN Error Passive Mode */
-#define nEP 0x0
#define EBO 0x8 /* CAN Error Bus Off Mode */
-#define nEBO 0x0
#define CSA 0x40 /* CAN Suspend Mode Acknowledge */
-#define nCSA 0x0
#define CCA 0x80 /* CAN Configuration Mode Acknowledge */
-#define nCCA 0x0
#define MBPTR 0x1f00 /* Mailbox Pointer */
#define TRM 0x4000 /* Transmit Mode Status */
-#define nTRM 0x0
#define REC 0x8000 /* Receive Mode Status */
-#define nREC 0x0
/* Bit masks for CAN0_DEBUG */
#define DEC 0x1 /* Disable Transmit/Receive Error Counters */
-#define nDEC 0x0
#define DRI 0x2 /* Disable CANRX Input Pin */
-#define nDRI 0x0
#define DTO 0x4 /* Disable CANTX Output Pin */
-#define nDTO 0x0
#define DIL 0x8 /* Disable Internal Loop */
-#define nDIL 0x0
#define MAA 0x10 /* Mode Auto-Acknowledge */
-#define nMAA 0x0
#define MRB 0x20 /* Mode Read Back */
-#define nMRB 0x0
#define CDE 0x8000 /* CAN Debug Mode Enable */
-#define nCDE 0x0
/* Bit masks for CAN0_CLOCK */
#define SJW 0x300 /* Synchronization Jump Width */
#define SAM 0x80 /* Sampling */
-#define nSAM 0x0
#define TSEG2 0x70 /* Time Segment 2 */
#define TSEG1 0xf /* Time Segment 1 */
/* Bit masks for CAN0_INTR */
#define CANRX 0x80 /* Serial Input From Transceiver */
-#define nCANRX 0x0
#define CANTX 0x40 /* Serial Output To Transceiver */
-#define nCANTX 0x0
#define SMACK 0x8 /* Sleep Mode Acknowledge */
-#define nSMACK 0x0
#define GIRQ 0x4 /* Global Interrupt Request Status */
-#define nGIRQ 0x0
#define MBTIRQ 0x2 /* Mailbox Transmit Interrupt Request */
-#define nMBTIRQ 0x0
#define MBRIRQ 0x1 /* Mailbox Receive Interrupt Request */
-#define nMBRIRQ 0x0
/* Bit masks for CAN0_GIM */
#define EWTIM 0x1 /* Error Warning Transmit Interrupt Mask */
-#define nEWTIM 0x0
#define EWRIM 0x2 /* Error Warning Receive Interrupt Mask */
-#define nEWRIM 0x0
#define EPIM 0x4 /* Error Passive Interrupt Mask */
-#define nEPIM 0x0
#define BOIM 0x8 /* Bus Off Interrupt Mask */
-#define nBOIM 0x0
#define WUIM 0x10 /* Wakeup Interrupt Mask */
-#define nWUIM 0x0
#define UIAIM 0x20 /* Unimplemented Address Interrupt Mask */
-#define nUIAIM 0x0
#define AAIM 0x40 /* Abort Acknowledge Interrupt Mask */
-#define nAAIM 0x0
#define RMLIM 0x80 /* Receive Message Lost Interrupt Mask */
-#define nRMLIM 0x0
#define UCEIM 0x100 /* Universal Counter Exceeded Interrupt Mask */
-#define nUCEIM 0x0
#define ADIM 0x400 /* Access Denied Interrupt Mask */
-#define nADIM 0x0
/* Bit masks for CAN0_GIS */
#define EWTIS 0x1 /* Error Warning Transmit Interrupt Status */
-#define nEWTIS 0x0
#define EWRIS 0x2 /* Error Warning Receive Interrupt Status */
-#define nEWRIS 0x0
#define EPIS 0x4 /* Error Passive Interrupt Status */
-#define nEPIS 0x0
#define BOIS 0x8 /* Bus Off Interrupt Status */
-#define nBOIS 0x0
#define WUIS 0x10 /* Wakeup Interrupt Status */
-#define nWUIS 0x0
#define UIAIS 0x20 /* Unimplemented Address Interrupt Status */
-#define nUIAIS 0x0
#define AAIS 0x40 /* Abort Acknowledge Interrupt Status */
-#define nAAIS 0x0
#define RMLIS 0x80 /* Receive Message Lost Interrupt Status */
-#define nRMLIS 0x0
#define UCEIS 0x100 /* Universal Counter Exceeded Interrupt Status */
-#define nUCEIS 0x0
#define ADIS 0x400 /* Access Denied Interrupt Status */
-#define nADIS 0x0
/* Bit masks for CAN0_GIF */
#define EWTIF 0x1 /* Error Warning Transmit Interrupt Flag */
-#define nEWTIF 0x0
#define EWRIF 0x2 /* Error Warning Receive Interrupt Flag */
-#define nEWRIF 0x0
#define EPIF 0x4 /* Error Passive Interrupt Flag */
-#define nEPIF 0x0
#define BOIF 0x8 /* Bus Off Interrupt Flag */
-#define nBOIF 0x0
#define WUIF 0x10 /* Wakeup Interrupt Flag */
-#define nWUIF 0x0
#define UIAIF 0x20 /* Unimplemented Address Interrupt Flag */
-#define nUIAIF 0x0
#define AAIF 0x40 /* Abort Acknowledge Interrupt Flag */
-#define nAAIF 0x0
#define RMLIF 0x80 /* Receive Message Lost Interrupt Flag */
-#define nRMLIF 0x0
#define UCEIF 0x100 /* Universal Counter Exceeded Interrupt Flag */
-#define nUCEIF 0x0
#define ADIF 0x400 /* Access Denied Interrupt Flag */
-#define nADIF 0x0
/* Bit masks for CAN0_MBTD */
#define TDR 0x80 /* Temporary Disable Request */
-#define nTDR 0x0
#define TDA 0x40 /* Temporary Disable Acknowledge */
-#define nTDA 0x0
#define TDPTR 0x1f /* Temporary Disable Pointer */
/* Bit masks for CAN0_UCCNF */
#define UCCNF 0xf /* Universal Counter Configuration */
#define UCRC 0x20 /* Universal Counter Reload/Clear */
-#define nUCRC 0x0
#define UCCT 0x40 /* Universal Counter CAN Trigger */
-#define nUCCT 0x0
#define UCE 0x80 /* Universal Counter Enable */
-#define nUCE 0x0
/* Bit masks for CAN0_UCCNT */
/* Bit masks for CAN0_ESR */
#define FER 0x80 /* Form Error */
-#define nFER 0x0
#define BEF 0x40 /* Bit Error Flag */
-#define nBEF 0x0
#define SA0 0x20 /* Stuck At Dominant */
-#define nSA0 0x0
#define CRCE 0x10 /* CRC Error */
-#define nCRCE 0x0
#define SER 0x8 /* Stuff Bit Error */
-#define nSER 0x0
#define ACKE 0x4 /* Acknowledge Error */
-#define nACKE 0x0
/* Bit masks for CAN0_EWR */
/* Bit masks for CAN0_AMxx_H */
#define FDF 0x8000 /* Filter On Data Field */
-#define nFDF 0x0
#define FMD 0x4000 /* Full Mask Data */
-#define nFMD 0x0
#define AMIDE 0x2000 /* Acceptance Mask Identifier Extension */
-#define nAMIDE 0x0
#define BASEID 0x1ffc /* Base Identifier */
#define EXTID_HI 0x3 /* Extended Identifier High Bits */
/* Bit masks for CAN0_MBxx_ID1 */
#define AME 0x8000 /* Acceptance Mask Enable */
-#define nAME 0x0
#define RTR 0x4000 /* Remote Transmission Request */
-#define nRTR 0x0
#define IDE 0x2000 /* Identifier Extension */
-#define nIDE 0x0
#define BASEID 0x1ffc /* Base Identifier */
#define EXTID_HI 0x3 /* Extended Identifier High Bits */
/* Bit masks for CAN0_MC1 */
#define MC0 0x1 /* Mailbox 0 Enable */
-#define nMC0 0x0
#define MC1 0x2 /* Mailbox 1 Enable */
-#define nMC1 0x0
#define MC2 0x4 /* Mailbox 2 Enable */
-#define nMC2 0x0
#define MC3 0x8 /* Mailbox 3 Enable */
-#define nMC3 0x0
#define MC4 0x10 /* Mailbox 4 Enable */
-#define nMC4 0x0
#define MC5 0x20 /* Mailbox 5 Enable */
-#define nMC5 0x0
#define MC6 0x40 /* Mailbox 6 Enable */
-#define nMC6 0x0
#define MC7 0x80 /* Mailbox 7 Enable */
-#define nMC7 0x0
#define MC8 0x100 /* Mailbox 8 Enable */
-#define nMC8 0x0
#define MC9 0x200 /* Mailbox 9 Enable */
-#define nMC9 0x0
#define MC10 0x400 /* Mailbox 10 Enable */
-#define nMC10 0x0
#define MC11 0x800 /* Mailbox 11 Enable */
-#define nMC11 0x0
#define MC12 0x1000 /* Mailbox 12 Enable */
-#define nMC12 0x0
#define MC13 0x2000 /* Mailbox 13 Enable */
-#define nMC13 0x0
#define MC14 0x4000 /* Mailbox 14 Enable */
-#define nMC14 0x0
#define MC15 0x8000 /* Mailbox 15 Enable */
-#define nMC15 0x0
/* Bit masks for CAN0_MC2 */
#define MC16 0x1 /* Mailbox 16 Enable */
-#define nMC16 0x0
#define MC17 0x2 /* Mailbox 17 Enable */
-#define nMC17 0x0
#define MC18 0x4 /* Mailbox 18 Enable */
-#define nMC18 0x0
#define MC19 0x8 /* Mailbox 19 Enable */
-#define nMC19 0x0
#define MC20 0x10 /* Mailbox 20 Enable */
-#define nMC20 0x0
#define MC21 0x20 /* Mailbox 21 Enable */
-#define nMC21 0x0
#define MC22 0x40 /* Mailbox 22 Enable */
-#define nMC22 0x0
#define MC23 0x80 /* Mailbox 23 Enable */
-#define nMC23 0x0
#define MC24 0x100 /* Mailbox 24 Enable */
-#define nMC24 0x0
#define MC25 0x200 /* Mailbox 25 Enable */
-#define nMC25 0x0
#define MC26 0x400 /* Mailbox 26 Enable */
-#define nMC26 0x0
#define MC27 0x800 /* Mailbox 27 Enable */
-#define nMC27 0x0
#define MC28 0x1000 /* Mailbox 28 Enable */
-#define nMC28 0x0
#define MC29 0x2000 /* Mailbox 29 Enable */
-#define nMC29 0x0
#define MC30 0x4000 /* Mailbox 30 Enable */
-#define nMC30 0x0
#define MC31 0x8000 /* Mailbox 31 Enable */
-#define nMC31 0x0
/* Bit masks for CAN0_MD1 */
#define MD0 0x1 /* Mailbox 0 Receive Enable */
-#define nMD0 0x0
#define MD1 0x2 /* Mailbox 1 Receive Enable */
-#define nMD1 0x0
#define MD2 0x4 /* Mailbox 2 Receive Enable */
-#define nMD2 0x0
#define MD3 0x8 /* Mailbox 3 Receive Enable */
-#define nMD3 0x0
#define MD4 0x10 /* Mailbox 4 Receive Enable */
-#define nMD4 0x0
#define MD5 0x20 /* Mailbox 5 Receive Enable */
-#define nMD5 0x0
#define MD6 0x40 /* Mailbox 6 Receive Enable */
-#define nMD6 0x0
#define MD7 0x80 /* Mailbox 7 Receive Enable */
-#define nMD7 0x0
#define MD8 0x100 /* Mailbox 8 Receive Enable */
-#define nMD8 0x0
#define MD9 0x200 /* Mailbox 9 Receive Enable */
-#define nMD9 0x0
#define MD10 0x400 /* Mailbox 10 Receive Enable */
-#define nMD10 0x0
#define MD11 0x800 /* Mailbox 11 Receive Enable */
-#define nMD11 0x0
#define MD12 0x1000 /* Mailbox 12 Receive Enable */
-#define nMD12 0x0
#define MD13 0x2000 /* Mailbox 13 Receive Enable */
-#define nMD13 0x0
#define MD14 0x4000 /* Mailbox 14 Receive Enable */
-#define nMD14 0x0
#define MD15 0x8000 /* Mailbox 15 Receive Enable */
-#define nMD15 0x0
/* Bit masks for CAN0_MD2 */
#define MD16 0x1 /* Mailbox 16 Receive Enable */
-#define nMD16 0x0
#define MD17 0x2 /* Mailbox 17 Receive Enable */
-#define nMD17 0x0
#define MD18 0x4 /* Mailbox 18 Receive Enable */
-#define nMD18 0x0
#define MD19 0x8 /* Mailbox 19 Receive Enable */
-#define nMD19 0x0
#define MD20 0x10 /* Mailbox 20 Receive Enable */
-#define nMD20 0x0
#define MD21 0x20 /* Mailbox 21 Receive Enable */
-#define nMD21 0x0
#define MD22 0x40 /* Mailbox 22 Receive Enable */
-#define nMD22 0x0
#define MD23 0x80 /* Mailbox 23 Receive Enable */
-#define nMD23 0x0
#define MD24 0x100 /* Mailbox 24 Receive Enable */
-#define nMD24 0x0
#define MD25 0x200 /* Mailbox 25 Receive Enable */
-#define nMD25 0x0
#define MD26 0x400 /* Mailbox 26 Receive Enable */
-#define nMD26 0x0
#define MD27 0x800 /* Mailbox 27 Receive Enable */
-#define nMD27 0x0
#define MD28 0x1000 /* Mailbox 28 Receive Enable */
-#define nMD28 0x0
#define MD29 0x2000 /* Mailbox 29 Receive Enable */
-#define nMD29 0x0
#define MD30 0x4000 /* Mailbox 30 Receive Enable */
-#define nMD30 0x0
#define MD31 0x8000 /* Mailbox 31 Receive Enable */
-#define nMD31 0x0
/* Bit masks for CAN0_RMP1 */
#define RMP0 0x1 /* Mailbox 0 Receive Message Pending */
-#define nRMP0 0x0
#define RMP1 0x2 /* Mailbox 1 Receive Message Pending */
-#define nRMP1 0x0
#define RMP2 0x4 /* Mailbox 2 Receive Message Pending */
-#define nRMP2 0x0
#define RMP3 0x8 /* Mailbox 3 Receive Message Pending */
-#define nRMP3 0x0
#define RMP4 0x10 /* Mailbox 4 Receive Message Pending */
-#define nRMP4 0x0
#define RMP5 0x20 /* Mailbox 5 Receive Message Pending */
-#define nRMP5 0x0
#define RMP6 0x40 /* Mailbox 6 Receive Message Pending */
-#define nRMP6 0x0
#define RMP7 0x80 /* Mailbox 7 Receive Message Pending */
-#define nRMP7 0x0
#define RMP8 0x100 /* Mailbox 8 Receive Message Pending */
-#define nRMP8 0x0
#define RMP9 0x200 /* Mailbox 9 Receive Message Pending */
-#define nRMP9 0x0
#define RMP10 0x400 /* Mailbox 10 Receive Message Pending */
-#define nRMP10 0x0
#define RMP11 0x800 /* Mailbox 11 Receive Message Pending */
-#define nRMP11 0x0
#define RMP12 0x1000 /* Mailbox 12 Receive Message Pending */
-#define nRMP12 0x0
#define RMP13 0x2000 /* Mailbox 13 Receive Message Pending */
-#define nRMP13 0x0
#define RMP14 0x4000 /* Mailbox 14 Receive Message Pending */
-#define nRMP14 0x0
#define RMP15 0x8000 /* Mailbox 15 Receive Message Pending */
-#define nRMP15 0x0
/* Bit masks for CAN0_RMP2 */
#define RMP16 0x1 /* Mailbox 16 Receive Message Pending */
-#define nRMP16 0x0
#define RMP17 0x2 /* Mailbox 17 Receive Message Pending */
-#define nRMP17 0x0
#define RMP18 0x4 /* Mailbox 18 Receive Message Pending */
-#define nRMP18 0x0
#define RMP19 0x8 /* Mailbox 19 Receive Message Pending */
-#define nRMP19 0x0
#define RMP20 0x10 /* Mailbox 20 Receive Message Pending */
-#define nRMP20 0x0
#define RMP21 0x20 /* Mailbox 21 Receive Message Pending */
-#define nRMP21 0x0
#define RMP22 0x40 /* Mailbox 22 Receive Message Pending */
-#define nRMP22 0x0
#define RMP23 0x80 /* Mailbox 23 Receive Message Pending */
-#define nRMP23 0x0
#define RMP24 0x100 /* Mailbox 24 Receive Message Pending */
-#define nRMP24 0x0
#define RMP25 0x200 /* Mailbox 25 Receive Message Pending */
-#define nRMP25 0x0
#define RMP26 0x400 /* Mailbox 26 Receive Message Pending */
-#define nRMP26 0x0
#define RMP27 0x800 /* Mailbox 27 Receive Message Pending */
-#define nRMP27 0x0
#define RMP28 0x1000 /* Mailbox 28 Receive Message Pending */
-#define nRMP28 0x0
#define RMP29 0x2000 /* Mailbox 29 Receive Message Pending */
-#define nRMP29 0x0
#define RMP30 0x4000 /* Mailbox 30 Receive Message Pending */
-#define nRMP30 0x0
#define RMP31 0x8000 /* Mailbox 31 Receive Message Pending */
-#define nRMP31 0x0
/* Bit masks for CAN0_RML1 */
#define RML0 0x1 /* Mailbox 0 Receive Message Lost */
-#define nRML0 0x0
#define RML1 0x2 /* Mailbox 1 Receive Message Lost */
-#define nRML1 0x0
#define RML2 0x4 /* Mailbox 2 Receive Message Lost */
-#define nRML2 0x0
#define RML3 0x8 /* Mailbox 3 Receive Message Lost */
-#define nRML3 0x0
#define RML4 0x10 /* Mailbox 4 Receive Message Lost */
-#define nRML4 0x0
#define RML5 0x20 /* Mailbox 5 Receive Message Lost */
-#define nRML5 0x0
#define RML6 0x40 /* Mailbox 6 Receive Message Lost */
-#define nRML6 0x0
#define RML7 0x80 /* Mailbox 7 Receive Message Lost */
-#define nRML7 0x0
#define RML8 0x100 /* Mailbox 8 Receive Message Lost */
-#define nRML8 0x0
#define RML9 0x200 /* Mailbox 9 Receive Message Lost */
-#define nRML9 0x0
#define RML10 0x400 /* Mailbox 10 Receive Message Lost */
-#define nRML10 0x0
#define RML11 0x800 /* Mailbox 11 Receive Message Lost */
-#define nRML11 0x0
#define RML12 0x1000 /* Mailbox 12 Receive Message Lost */
-#define nRML12 0x0
#define RML13 0x2000 /* Mailbox 13 Receive Message Lost */
-#define nRML13 0x0
#define RML14 0x4000 /* Mailbox 14 Receive Message Lost */
-#define nRML14 0x0
#define RML15 0x8000 /* Mailbox 15 Receive Message Lost */
-#define nRML15 0x0
/* Bit masks for CAN0_RML2 */
#define RML16 0x1 /* Mailbox 16 Receive Message Lost */
-#define nRML16 0x0
#define RML17 0x2 /* Mailbox 17 Receive Message Lost */
-#define nRML17 0x0
#define RML18 0x4 /* Mailbox 18 Receive Message Lost */
-#define nRML18 0x0
#define RML19 0x8 /* Mailbox 19 Receive Message Lost */
-#define nRML19 0x0
#define RML20 0x10 /* Mailbox 20 Receive Message Lost */
-#define nRML20 0x0
#define RML21 0x20 /* Mailbox 21 Receive Message Lost */
-#define nRML21 0x0
#define RML22 0x40 /* Mailbox 22 Receive Message Lost */
-#define nRML22 0x0
#define RML23 0x80 /* Mailbox 23 Receive Message Lost */
-#define nRML23 0x0
#define RML24 0x100 /* Mailbox 24 Receive Message Lost */
-#define nRML24 0x0
#define RML25 0x200 /* Mailbox 25 Receive Message Lost */
-#define nRML25 0x0
#define RML26 0x400 /* Mailbox 26 Receive Message Lost */
-#define nRML26 0x0
#define RML27 0x800 /* Mailbox 27 Receive Message Lost */
-#define nRML27 0x0
#define RML28 0x1000 /* Mailbox 28 Receive Message Lost */
-#define nRML28 0x0
#define RML29 0x2000 /* Mailbox 29 Receive Message Lost */
-#define nRML29 0x0
#define RML30 0x4000 /* Mailbox 30 Receive Message Lost */
-#define nRML30 0x0
#define RML31 0x8000 /* Mailbox 31 Receive Message Lost */
-#define nRML31 0x0
/* Bit masks for CAN0_OPSS1 */
#define OPSS0 0x1 /* Mailbox 0 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS0 0x0
#define OPSS1 0x2 /* Mailbox 1 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS1 0x0
#define OPSS2 0x4 /* Mailbox 2 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS2 0x0
#define OPSS3 0x8 /* Mailbox 3 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS3 0x0
#define OPSS4 0x10 /* Mailbox 4 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS4 0x0
#define OPSS5 0x20 /* Mailbox 5 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS5 0x0
#define OPSS6 0x40 /* Mailbox 6 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS6 0x0
#define OPSS7 0x80 /* Mailbox 7 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS7 0x0
#define OPSS8 0x100 /* Mailbox 8 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS8 0x0
#define OPSS9 0x200 /* Mailbox 9 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS9 0x0
#define OPSS10 0x400 /* Mailbox 10 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS10 0x0
#define OPSS11 0x800 /* Mailbox 11 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS11 0x0
#define OPSS12 0x1000 /* Mailbox 12 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS12 0x0
#define OPSS13 0x2000 /* Mailbox 13 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS13 0x0
#define OPSS14 0x4000 /* Mailbox 14 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS14 0x0
#define OPSS15 0x8000 /* Mailbox 15 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS15 0x0
/* Bit masks for CAN0_OPSS2 */
#define OPSS16 0x1 /* Mailbox 16 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS16 0x0
#define OPSS17 0x2 /* Mailbox 17 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS17 0x0
#define OPSS18 0x4 /* Mailbox 18 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS18 0x0
#define OPSS19 0x8 /* Mailbox 19 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS19 0x0
#define OPSS20 0x10 /* Mailbox 20 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS20 0x0
#define OPSS21 0x20 /* Mailbox 21 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS21 0x0
#define OPSS22 0x40 /* Mailbox 22 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS22 0x0
#define OPSS23 0x80 /* Mailbox 23 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS23 0x0
#define OPSS24 0x100 /* Mailbox 24 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS24 0x0
#define OPSS25 0x200 /* Mailbox 25 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS25 0x0
#define OPSS26 0x400 /* Mailbox 26 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS26 0x0
#define OPSS27 0x800 /* Mailbox 27 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS27 0x0
#define OPSS28 0x1000 /* Mailbox 28 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS28 0x0
#define OPSS29 0x2000 /* Mailbox 29 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS29 0x0
#define OPSS30 0x4000 /* Mailbox 30 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS30 0x0
#define OPSS31 0x8000 /* Mailbox 31 Overwrite Protection/Single-Shot Transmission Enable */
-#define nOPSS31 0x0
/* Bit masks for CAN0_TRS1 */
#define TRS0 0x1 /* Mailbox 0 Transmit Request Set */
-#define nTRS0 0x0
#define TRS1 0x2 /* Mailbox 1 Transmit Request Set */
-#define nTRS1 0x0
#define TRS2 0x4 /* Mailbox 2 Transmit Request Set */
-#define nTRS2 0x0
#define TRS3 0x8 /* Mailbox 3 Transmit Request Set */
-#define nTRS3 0x0
#define TRS4 0x10 /* Mailbox 4 Transmit Request Set */
-#define nTRS4 0x0
#define TRS5 0x20 /* Mailbox 5 Transmit Request Set */
-#define nTRS5 0x0
#define TRS6 0x40 /* Mailbox 6 Transmit Request Set */
-#define nTRS6 0x0
#define TRS7 0x80 /* Mailbox 7 Transmit Request Set */
-#define nTRS7 0x0
#define TRS8 0x100 /* Mailbox 8 Transmit Request Set */
-#define nTRS8 0x0
#define TRS9 0x200 /* Mailbox 9 Transmit Request Set */
-#define nTRS9 0x0
#define TRS10 0x400 /* Mailbox 10 Transmit Request Set */
-#define nTRS10 0x0
#define TRS11 0x800 /* Mailbox 11 Transmit Request Set */
-#define nTRS11 0x0
#define TRS12 0x1000 /* Mailbox 12 Transmit Request Set */
-#define nTRS12 0x0
#define TRS13 0x2000 /* Mailbox 13 Transmit Request Set */
-#define nTRS13 0x0
#define TRS14 0x4000 /* Mailbox 14 Transmit Request Set */
-#define nTRS14 0x0
#define TRS15 0x8000 /* Mailbox 15 Transmit Request Set */
-#define nTRS15 0x0
/* Bit masks for CAN0_TRS2 */
#define TRS16 0x1 /* Mailbox 16 Transmit Request Set */
-#define nTRS16 0x0
#define TRS17 0x2 /* Mailbox 17 Transmit Request Set */
-#define nTRS17 0x0
#define TRS18 0x4 /* Mailbox 18 Transmit Request Set */
-#define nTRS18 0x0
#define TRS19 0x8 /* Mailbox 19 Transmit Request Set */
-#define nTRS19 0x0
#define TRS20 0x10 /* Mailbox 20 Transmit Request Set */
-#define nTRS20 0x0
#define TRS21 0x20 /* Mailbox 21 Transmit Request Set */
-#define nTRS21 0x0
#define TRS22 0x40 /* Mailbox 22 Transmit Request Set */
-#define nTRS22 0x0
#define TRS23 0x80 /* Mailbox 23 Transmit Request Set */
-#define nTRS23 0x0
#define TRS24 0x100 /* Mailbox 24 Transmit Request Set */
-#define nTRS24 0x0
#define TRS25 0x200 /* Mailbox 25 Transmit Request Set */
-#define nTRS25 0x0
#define TRS26 0x400 /* Mailbox 26 Transmit Request Set */
-#define nTRS26 0x0
#define TRS27 0x800 /* Mailbox 27 Transmit Request Set */
-#define nTRS27 0x0
#define TRS28 0x1000 /* Mailbox 28 Transmit Request Set */
-#define nTRS28 0x0
#define TRS29 0x2000 /* Mailbox 29 Transmit Request Set */
-#define nTRS29 0x0
#define TRS30 0x4000 /* Mailbox 30 Transmit Request Set */
-#define nTRS30 0x0
#define TRS31 0x8000 /* Mailbox 31 Transmit Request Set */
-#define nTRS31 0x0
/* Bit masks for CAN0_TRR1 */
#define TRR0 0x1 /* Mailbox 0 Transmit Request Reset */
-#define nTRR0 0x0
#define TRR1 0x2 /* Mailbox 1 Transmit Request Reset */
-#define nTRR1 0x0
#define TRR2 0x4 /* Mailbox 2 Transmit Request Reset */
-#define nTRR2 0x0
#define TRR3 0x8 /* Mailbox 3 Transmit Request Reset */
-#define nTRR3 0x0
#define TRR4 0x10 /* Mailbox 4 Transmit Request Reset */
-#define nTRR4 0x0
#define TRR5 0x20 /* Mailbox 5 Transmit Request Reset */
-#define nTRR5 0x0
#define TRR6 0x40 /* Mailbox 6 Transmit Request Reset */
-#define nTRR6 0x0
#define TRR7 0x80 /* Mailbox 7 Transmit Request Reset */
-#define nTRR7 0x0
#define TRR8 0x100 /* Mailbox 8 Transmit Request Reset */
-#define nTRR8 0x0
#define TRR9 0x200 /* Mailbox 9 Transmit Request Reset */
-#define nTRR9 0x0
#define TRR10 0x400 /* Mailbox 10 Transmit Request Reset */
-#define nTRR10 0x0
#define TRR11 0x800 /* Mailbox 11 Transmit Request Reset */
-#define nTRR11 0x0
#define TRR12 0x1000 /* Mailbox 12 Transmit Request Reset */
-#define nTRR12 0x0
#define TRR13 0x2000 /* Mailbox 13 Transmit Request Reset */
-#define nTRR13 0x0
#define TRR14 0x4000 /* Mailbox 14 Transmit Request Reset */
-#define nTRR14 0x0
#define TRR15 0x8000 /* Mailbox 15 Transmit Request Reset */
-#define nTRR15 0x0
/* Bit masks for CAN0_TRR2 */
#define TRR16 0x1 /* Mailbox 16 Transmit Request Reset */
-#define nTRR16 0x0
#define TRR17 0x2 /* Mailbox 17 Transmit Request Reset */
-#define nTRR17 0x0
#define TRR18 0x4 /* Mailbox 18 Transmit Request Reset */
-#define nTRR18 0x0
#define TRR19 0x8 /* Mailbox 19 Transmit Request Reset */
-#define nTRR19 0x0
#define TRR20 0x10 /* Mailbox 20 Transmit Request Reset */
-#define nTRR20 0x0
#define TRR21 0x20 /* Mailbox 21 Transmit Request Reset */
-#define nTRR21 0x0
#define TRR22 0x40 /* Mailbox 22 Transmit Request Reset */
-#define nTRR22 0x0
#define TRR23 0x80 /* Mailbox 23 Transmit Request Reset */
-#define nTRR23 0x0
#define TRR24 0x100 /* Mailbox 24 Transmit Request Reset */
-#define nTRR24 0x0
#define TRR25 0x200 /* Mailbox 25 Transmit Request Reset */
-#define nTRR25 0x0
#define TRR26 0x400 /* Mailbox 26 Transmit Request Reset */
-#define nTRR26 0x0
#define TRR27 0x800 /* Mailbox 27 Transmit Request Reset */
-#define nTRR27 0x0
#define TRR28 0x1000 /* Mailbox 28 Transmit Request Reset */
-#define nTRR28 0x0
#define TRR29 0x2000 /* Mailbox 29 Transmit Request Reset */
-#define nTRR29 0x0
#define TRR30 0x4000 /* Mailbox 30 Transmit Request Reset */
-#define nTRR30 0x0
#define TRR31 0x8000 /* Mailbox 31 Transmit Request Reset */
-#define nTRR31 0x0
/* Bit masks for CAN0_AA1 */
#define AA0 0x1 /* Mailbox 0 Abort Acknowledge */
-#define nAA0 0x0
#define AA1 0x2 /* Mailbox 1 Abort Acknowledge */
-#define nAA1 0x0
#define AA2 0x4 /* Mailbox 2 Abort Acknowledge */
-#define nAA2 0x0
#define AA3 0x8 /* Mailbox 3 Abort Acknowledge */
-#define nAA3 0x0
#define AA4 0x10 /* Mailbox 4 Abort Acknowledge */
-#define nAA4 0x0
#define AA5 0x20 /* Mailbox 5 Abort Acknowledge */
-#define nAA5 0x0
#define AA6 0x40 /* Mailbox 6 Abort Acknowledge */
-#define nAA6 0x0
#define AA7 0x80 /* Mailbox 7 Abort Acknowledge */
-#define nAA7 0x0
#define AA8 0x100 /* Mailbox 8 Abort Acknowledge */
-#define nAA8 0x0
#define AA9 0x200 /* Mailbox 9 Abort Acknowledge */
-#define nAA9 0x0
#define AA10 0x400 /* Mailbox 10 Abort Acknowledge */
-#define nAA10 0x0
#define AA11 0x800 /* Mailbox 11 Abort Acknowledge */
-#define nAA11 0x0
#define AA12 0x1000 /* Mailbox 12 Abort Acknowledge */
-#define nAA12 0x0
#define AA13 0x2000 /* Mailbox 13 Abort Acknowledge */
-#define nAA13 0x0
#define AA14 0x4000 /* Mailbox 14 Abort Acknowledge */
-#define nAA14 0x0
#define AA15 0x8000 /* Mailbox 15 Abort Acknowledge */
-#define nAA15 0x0
/* Bit masks for CAN0_AA2 */
#define AA16 0x1 /* Mailbox 16 Abort Acknowledge */
-#define nAA16 0x0
#define AA17 0x2 /* Mailbox 17 Abort Acknowledge */
-#define nAA17 0x0
#define AA18 0x4 /* Mailbox 18 Abort Acknowledge */
-#define nAA18 0x0
#define AA19 0x8 /* Mailbox 19 Abort Acknowledge */
-#define nAA19 0x0
#define AA20 0x10 /* Mailbox 20 Abort Acknowledge */
-#define nAA20 0x0
#define AA21 0x20 /* Mailbox 21 Abort Acknowledge */
-#define nAA21 0x0
#define AA22 0x40 /* Mailbox 22 Abort Acknowledge */
-#define nAA22 0x0
#define AA23 0x80 /* Mailbox 23 Abort Acknowledge */
-#define nAA23 0x0
#define AA24 0x100 /* Mailbox 24 Abort Acknowledge */
-#define nAA24 0x0
#define AA25 0x200 /* Mailbox 25 Abort Acknowledge */
-#define nAA25 0x0
#define AA26 0x400 /* Mailbox 26 Abort Acknowledge */
-#define nAA26 0x0
#define AA27 0x800 /* Mailbox 27 Abort Acknowledge */
-#define nAA27 0x0
#define AA28 0x1000 /* Mailbox 28 Abort Acknowledge */
-#define nAA28 0x0
#define AA29 0x2000 /* Mailbox 29 Abort Acknowledge */
-#define nAA29 0x0
#define AA30 0x4000 /* Mailbox 30 Abort Acknowledge */
-#define nAA30 0x0
#define AA31 0x8000 /* Mailbox 31 Abort Acknowledge */
-#define nAA31 0x0
/* Bit masks for CAN0_TA1 */
#define TA0 0x1 /* Mailbox 0 Transmit Acknowledge */
-#define nTA0 0x0
#define TA1 0x2 /* Mailbox 1 Transmit Acknowledge */
-#define nTA1 0x0
#define TA2 0x4 /* Mailbox 2 Transmit Acknowledge */
-#define nTA2 0x0
#define TA3 0x8 /* Mailbox 3 Transmit Acknowledge */
-#define nTA3 0x0
#define TA4 0x10 /* Mailbox 4 Transmit Acknowledge */
-#define nTA4 0x0
#define TA5 0x20 /* Mailbox 5 Transmit Acknowledge */
-#define nTA5 0x0
#define TA6 0x40 /* Mailbox 6 Transmit Acknowledge */
-#define nTA6 0x0
#define TA7 0x80 /* Mailbox 7 Transmit Acknowledge */
-#define nTA7 0x0
#define TA8 0x100 /* Mailbox 8 Transmit Acknowledge */
-#define nTA8 0x0
#define TA9 0x200 /* Mailbox 9 Transmit Acknowledge */
-#define nTA9 0x0
#define TA10 0x400 /* Mailbox 10 Transmit Acknowledge */
-#define nTA10 0x0
#define TA11 0x800 /* Mailbox 11 Transmit Acknowledge */
-#define nTA11 0x0
#define TA12 0x1000 /* Mailbox 12 Transmit Acknowledge */
-#define nTA12 0x0
#define TA13 0x2000 /* Mailbox 13 Transmit Acknowledge */
-#define nTA13 0x0
#define TA14 0x4000 /* Mailbox 14 Transmit Acknowledge */
-#define nTA14 0x0
#define TA15 0x8000 /* Mailbox 15 Transmit Acknowledge */
-#define nTA15 0x0
/* Bit masks for CAN0_TA2 */
#define TA16 0x1 /* Mailbox 16 Transmit Acknowledge */
-#define nTA16 0x0
#define TA17 0x2 /* Mailbox 17 Transmit Acknowledge */
-#define nTA17 0x0
#define TA18 0x4 /* Mailbox 18 Transmit Acknowledge */
-#define nTA18 0x0
#define TA19 0x8 /* Mailbox 19 Transmit Acknowledge */
-#define nTA19 0x0
#define TA20 0x10 /* Mailbox 20 Transmit Acknowledge */
-#define nTA20 0x0
#define TA21 0x20 /* Mailbox 21 Transmit Acknowledge */
-#define nTA21 0x0
#define TA22 0x40 /* Mailbox 22 Transmit Acknowledge */
-#define nTA22 0x0
#define TA23 0x80 /* Mailbox 23 Transmit Acknowledge */
-#define nTA23 0x0
#define TA24 0x100 /* Mailbox 24 Transmit Acknowledge */
-#define nTA24 0x0
#define TA25 0x200 /* Mailbox 25 Transmit Acknowledge */
-#define nTA25 0x0
#define TA26 0x400 /* Mailbox 26 Transmit Acknowledge */
-#define nTA26 0x0
#define TA27 0x800 /* Mailbox 27 Transmit Acknowledge */
-#define nTA27 0x0
#define TA28 0x1000 /* Mailbox 28 Transmit Acknowledge */
-#define nTA28 0x0
#define TA29 0x2000 /* Mailbox 29 Transmit Acknowledge */
-#define nTA29 0x0
#define TA30 0x4000 /* Mailbox 30 Transmit Acknowledge */
-#define nTA30 0x0
#define TA31 0x8000 /* Mailbox 31 Transmit Acknowledge */
-#define nTA31 0x0
/* Bit masks for CAN0_RFH1 */
#define RFH0 0x1 /* Mailbox 0 Remote Frame Handling Enable */
-#define nRFH0 0x0
#define RFH1 0x2 /* Mailbox 1 Remote Frame Handling Enable */
-#define nRFH1 0x0
#define RFH2 0x4 /* Mailbox 2 Remote Frame Handling Enable */
-#define nRFH2 0x0
#define RFH3 0x8 /* Mailbox 3 Remote Frame Handling Enable */
-#define nRFH3 0x0
#define RFH4 0x10 /* Mailbox 4 Remote Frame Handling Enable */
-#define nRFH4 0x0
#define RFH5 0x20 /* Mailbox 5 Remote Frame Handling Enable */
-#define nRFH5 0x0
#define RFH6 0x40 /* Mailbox 6 Remote Frame Handling Enable */
-#define nRFH6 0x0
#define RFH7 0x80 /* Mailbox 7 Remote Frame Handling Enable */
-#define nRFH7 0x0
#define RFH8 0x100 /* Mailbox 8 Remote Frame Handling Enable */
-#define nRFH8 0x0
#define RFH9 0x200 /* Mailbox 9 Remote Frame Handling Enable */
-#define nRFH9 0x0
#define RFH10 0x400 /* Mailbox 10 Remote Frame Handling Enable */
-#define nRFH10 0x0
#define RFH11 0x800 /* Mailbox 11 Remote Frame Handling Enable */
-#define nRFH11 0x0
#define RFH12 0x1000 /* Mailbox 12 Remote Frame Handling Enable */
-#define nRFH12 0x0
#define RFH13 0x2000 /* Mailbox 13 Remote Frame Handling Enable */
-#define nRFH13 0x0
#define RFH14 0x4000 /* Mailbox 14 Remote Frame Handling Enable */
-#define nRFH14 0x0
#define RFH15 0x8000 /* Mailbox 15 Remote Frame Handling Enable */
-#define nRFH15 0x0
/* Bit masks for CAN0_RFH2 */
#define RFH16 0x1 /* Mailbox 16 Remote Frame Handling Enable */
-#define nRFH16 0x0
#define RFH17 0x2 /* Mailbox 17 Remote Frame Handling Enable */
-#define nRFH17 0x0
#define RFH18 0x4 /* Mailbox 18 Remote Frame Handling Enable */
-#define nRFH18 0x0
#define RFH19 0x8 /* Mailbox 19 Remote Frame Handling Enable */
-#define nRFH19 0x0
#define RFH20 0x10 /* Mailbox 20 Remote Frame Handling Enable */
-#define nRFH20 0x0
#define RFH21 0x20 /* Mailbox 21 Remote Frame Handling Enable */
-#define nRFH21 0x0
#define RFH22 0x40 /* Mailbox 22 Remote Frame Handling Enable */
-#define nRFH22 0x0
#define RFH23 0x80 /* Mailbox 23 Remote Frame Handling Enable */
-#define nRFH23 0x0
#define RFH24 0x100 /* Mailbox 24 Remote Frame Handling Enable */
-#define nRFH24 0x0
#define RFH25 0x200 /* Mailbox 25 Remote Frame Handling Enable */
-#define nRFH25 0x0
#define RFH26 0x400 /* Mailbox 26 Remote Frame Handling Enable */
-#define nRFH26 0x0
#define RFH27 0x800 /* Mailbox 27 Remote Frame Handling Enable */
-#define nRFH27 0x0
#define RFH28 0x1000 /* Mailbox 28 Remote Frame Handling Enable */
-#define nRFH28 0x0
#define RFH29 0x2000 /* Mailbox 29 Remote Frame Handling Enable */
-#define nRFH29 0x0
#define RFH30 0x4000 /* Mailbox 30 Remote Frame Handling Enable */
-#define nRFH30 0x0
#define RFH31 0x8000 /* Mailbox 31 Remote Frame Handling Enable */
-#define nRFH31 0x0
/* Bit masks for CAN0_MBIM1 */
#define MBIM0 0x1 /* Mailbox 0 Mailbox Interrupt Mask */
-#define nMBIM0 0x0
#define MBIM1 0x2 /* Mailbox 1 Mailbox Interrupt Mask */
-#define nMBIM1 0x0
#define MBIM2 0x4 /* Mailbox 2 Mailbox Interrupt Mask */
-#define nMBIM2 0x0
#define MBIM3 0x8 /* Mailbox 3 Mailbox Interrupt Mask */
-#define nMBIM3 0x0
#define MBIM4 0x10 /* Mailbox 4 Mailbox Interrupt Mask */
-#define nMBIM4 0x0
#define MBIM5 0x20 /* Mailbox 5 Mailbox Interrupt Mask */
-#define nMBIM5 0x0
#define MBIM6 0x40 /* Mailbox 6 Mailbox Interrupt Mask */
-#define nMBIM6 0x0
#define MBIM7 0x80 /* Mailbox 7 Mailbox Interrupt Mask */
-#define nMBIM7 0x0
#define MBIM8 0x100 /* Mailbox 8 Mailbox Interrupt Mask */
-#define nMBIM8 0x0
#define MBIM9 0x200 /* Mailbox 9 Mailbox Interrupt Mask */
-#define nMBIM9 0x0
#define MBIM10 0x400 /* Mailbox 10 Mailbox Interrupt Mask */
-#define nMBIM10 0x0
#define MBIM11 0x800 /* Mailbox 11 Mailbox Interrupt Mask */
-#define nMBIM11 0x0
#define MBIM12 0x1000 /* Mailbox 12 Mailbox Interrupt Mask */
-#define nMBIM12 0x0
#define MBIM13 0x2000 /* Mailbox 13 Mailbox Interrupt Mask */
-#define nMBIM13 0x0
#define MBIM14 0x4000 /* Mailbox 14 Mailbox Interrupt Mask */
-#define nMBIM14 0x0
#define MBIM15 0x8000 /* Mailbox 15 Mailbox Interrupt Mask */
-#define nMBIM15 0x0
/* Bit masks for CAN0_MBIM2 */
#define MBIM16 0x1 /* Mailbox 16 Mailbox Interrupt Mask */
-#define nMBIM16 0x0
#define MBIM17 0x2 /* Mailbox 17 Mailbox Interrupt Mask */
-#define nMBIM17 0x0
#define MBIM18 0x4 /* Mailbox 18 Mailbox Interrupt Mask */
-#define nMBIM18 0x0
#define MBIM19 0x8 /* Mailbox 19 Mailbox Interrupt Mask */
-#define nMBIM19 0x0
#define MBIM20 0x10 /* Mailbox 20 Mailbox Interrupt Mask */
-#define nMBIM20 0x0
#define MBIM21 0x20 /* Mailbox 21 Mailbox Interrupt Mask */
-#define nMBIM21 0x0
#define MBIM22 0x40 /* Mailbox 22 Mailbox Interrupt Mask */
-#define nMBIM22 0x0
#define MBIM23 0x80 /* Mailbox 23 Mailbox Interrupt Mask */
-#define nMBIM23 0x0
#define MBIM24 0x100 /* Mailbox 24 Mailbox Interrupt Mask */
-#define nMBIM24 0x0
#define MBIM25 0x200 /* Mailbox 25 Mailbox Interrupt Mask */
-#define nMBIM25 0x0
#define MBIM26 0x400 /* Mailbox 26 Mailbox Interrupt Mask */
-#define nMBIM26 0x0
#define MBIM27 0x800 /* Mailbox 27 Mailbox Interrupt Mask */
-#define nMBIM27 0x0
#define MBIM28 0x1000 /* Mailbox 28 Mailbox Interrupt Mask */
-#define nMBIM28 0x0
#define MBIM29 0x2000 /* Mailbox 29 Mailbox Interrupt Mask */
-#define nMBIM29 0x0
#define MBIM30 0x4000 /* Mailbox 30 Mailbox Interrupt Mask */
-#define nMBIM30 0x0
#define MBIM31 0x8000 /* Mailbox 31 Mailbox Interrupt Mask */
-#define nMBIM31 0x0
/* Bit masks for CAN0_MBTIF1 */
#define MBTIF0 0x1 /* Mailbox 0 Mailbox Transmit Interrupt Flag */
-#define nMBTIF0 0x0
#define MBTIF1 0x2 /* Mailbox 1 Mailbox Transmit Interrupt Flag */
-#define nMBTIF1 0x0
#define MBTIF2 0x4 /* Mailbox 2 Mailbox Transmit Interrupt Flag */
-#define nMBTIF2 0x0
#define MBTIF3 0x8 /* Mailbox 3 Mailbox Transmit Interrupt Flag */
-#define nMBTIF3 0x0
#define MBTIF4 0x10 /* Mailbox 4 Mailbox Transmit Interrupt Flag */
-#define nMBTIF4 0x0
#define MBTIF5 0x20 /* Mailbox 5 Mailbox Transmit Interrupt Flag */
-#define nMBTIF5 0x0
#define MBTIF6 0x40 /* Mailbox 6 Mailbox Transmit Interrupt Flag */
-#define nMBTIF6 0x0
#define MBTIF7 0x80 /* Mailbox 7 Mailbox Transmit Interrupt Flag */
-#define nMBTIF7 0x0
#define MBTIF8 0x100 /* Mailbox 8 Mailbox Transmit Interrupt Flag */
-#define nMBTIF8 0x0
#define MBTIF9 0x200 /* Mailbox 9 Mailbox Transmit Interrupt Flag */
-#define nMBTIF9 0x0
#define MBTIF10 0x400 /* Mailbox 10 Mailbox Transmit Interrupt Flag */
-#define nMBTIF10 0x0
#define MBTIF11 0x800 /* Mailbox 11 Mailbox Transmit Interrupt Flag */
-#define nMBTIF11 0x0
#define MBTIF12 0x1000 /* Mailbox 12 Mailbox Transmit Interrupt Flag */
-#define nMBTIF12 0x0
#define MBTIF13 0x2000 /* Mailbox 13 Mailbox Transmit Interrupt Flag */
-#define nMBTIF13 0x0
#define MBTIF14 0x4000 /* Mailbox 14 Mailbox Transmit Interrupt Flag */
-#define nMBTIF14 0x0
#define MBTIF15 0x8000 /* Mailbox 15 Mailbox Transmit Interrupt Flag */
-#define nMBTIF15 0x0
/* Bit masks for CAN0_MBTIF2 */
#define MBTIF16 0x1 /* Mailbox 16 Mailbox Transmit Interrupt Flag */
-#define nMBTIF16 0x0
#define MBTIF17 0x2 /* Mailbox 17 Mailbox Transmit Interrupt Flag */
-#define nMBTIF17 0x0
#define MBTIF18 0x4 /* Mailbox 18 Mailbox Transmit Interrupt Flag */
-#define nMBTIF18 0x0
#define MBTIF19 0x8 /* Mailbox 19 Mailbox Transmit Interrupt Flag */
-#define nMBTIF19 0x0
#define MBTIF20 0x10 /* Mailbox 20 Mailbox Transmit Interrupt Flag */
-#define nMBTIF20 0x0
#define MBTIF21 0x20 /* Mailbox 21 Mailbox Transmit Interrupt Flag */
-#define nMBTIF21 0x0
#define MBTIF22 0x40 /* Mailbox 22 Mailbox Transmit Interrupt Flag */
-#define nMBTIF22 0x0
#define MBTIF23 0x80 /* Mailbox 23 Mailbox Transmit Interrupt Flag */
-#define nMBTIF23 0x0
#define MBTIF24 0x100 /* Mailbox 24 Mailbox Transmit Interrupt Flag */
-#define nMBTIF24 0x0
#define MBTIF25 0x200 /* Mailbox 25 Mailbox Transmit Interrupt Flag */
-#define nMBTIF25 0x0
#define MBTIF26 0x400 /* Mailbox 26 Mailbox Transmit Interrupt Flag */
-#define nMBTIF26 0x0
#define MBTIF27 0x800 /* Mailbox 27 Mailbox Transmit Interrupt Flag */
-#define nMBTIF27 0x0
#define MBTIF28 0x1000 /* Mailbox 28 Mailbox Transmit Interrupt Flag */
-#define nMBTIF28 0x0
#define MBTIF29 0x2000 /* Mailbox 29 Mailbox Transmit Interrupt Flag */
-#define nMBTIF29 0x0
#define MBTIF30 0x4000 /* Mailbox 30 Mailbox Transmit Interrupt Flag */
-#define nMBTIF30 0x0
#define MBTIF31 0x8000 /* Mailbox 31 Mailbox Transmit Interrupt Flag */
-#define nMBTIF31 0x0
/* Bit masks for CAN0_MBRIF1 */
#define MBRIF0 0x1 /* Mailbox 0 Mailbox Receive Interrupt Flag */
-#define nMBRIF0 0x0
#define MBRIF1 0x2 /* Mailbox 1 Mailbox Receive Interrupt Flag */
-#define nMBRIF1 0x0
#define MBRIF2 0x4 /* Mailbox 2 Mailbox Receive Interrupt Flag */
-#define nMBRIF2 0x0
#define MBRIF3 0x8 /* Mailbox 3 Mailbox Receive Interrupt Flag */
-#define nMBRIF3 0x0
#define MBRIF4 0x10 /* Mailbox 4 Mailbox Receive Interrupt Flag */
-#define nMBRIF4 0x0
#define MBRIF5 0x20 /* Mailbox 5 Mailbox Receive Interrupt Flag */
-#define nMBRIF5 0x0
#define MBRIF6 0x40 /* Mailbox 6 Mailbox Receive Interrupt Flag */
-#define nMBRIF6 0x0
#define MBRIF7 0x80 /* Mailbox 7 Mailbox Receive Interrupt Flag */
-#define nMBRIF7 0x0
#define MBRIF8 0x100 /* Mailbox 8 Mailbox Receive Interrupt Flag */
-#define nMBRIF8 0x0
#define MBRIF9 0x200 /* Mailbox 9 Mailbox Receive Interrupt Flag */
-#define nMBRIF9 0x0
#define MBRIF10 0x400 /* Mailbox 10 Mailbox Receive Interrupt Flag */
-#define nMBRIF10 0x0
#define MBRIF11 0x800 /* Mailbox 11 Mailbox Receive Interrupt Flag */
-#define nMBRIF11 0x0
#define MBRIF12 0x1000 /* Mailbox 12 Mailbox Receive Interrupt Flag */
-#define nMBRIF12 0x0
#define MBRIF13 0x2000 /* Mailbox 13 Mailbox Receive Interrupt Flag */
-#define nMBRIF13 0x0
#define MBRIF14 0x4000 /* Mailbox 14 Mailbox Receive Interrupt Flag */
-#define nMBRIF14 0x0
#define MBRIF15 0x8000 /* Mailbox 15 Mailbox Receive Interrupt Flag */
-#define nMBRIF15 0x0
/* Bit masks for CAN0_MBRIF2 */
#define MBRIF16 0x1 /* Mailbox 16 Mailbox Receive Interrupt Flag */
-#define nMBRIF16 0x0
#define MBRIF17 0x2 /* Mailbox 17 Mailbox Receive Interrupt Flag */
-#define nMBRIF17 0x0
#define MBRIF18 0x4 /* Mailbox 18 Mailbox Receive Interrupt Flag */
-#define nMBRIF18 0x0
#define MBRIF19 0x8 /* Mailbox 19 Mailbox Receive Interrupt Flag */
-#define nMBRIF19 0x0
#define MBRIF20 0x10 /* Mailbox 20 Mailbox Receive Interrupt Flag */
-#define nMBRIF20 0x0
#define MBRIF21 0x20 /* Mailbox 21 Mailbox Receive Interrupt Flag */
-#define nMBRIF21 0x0
#define MBRIF22 0x40 /* Mailbox 22 Mailbox Receive Interrupt Flag */
-#define nMBRIF22 0x0
#define MBRIF23 0x80 /* Mailbox 23 Mailbox Receive Interrupt Flag */
-#define nMBRIF23 0x0
#define MBRIF24 0x100 /* Mailbox 24 Mailbox Receive Interrupt Flag */
-#define nMBRIF24 0x0
#define MBRIF25 0x200 /* Mailbox 25 Mailbox Receive Interrupt Flag */
-#define nMBRIF25 0x0
#define MBRIF26 0x400 /* Mailbox 26 Mailbox Receive Interrupt Flag */
-#define nMBRIF26 0x0
#define MBRIF27 0x800 /* Mailbox 27 Mailbox Receive Interrupt Flag */
-#define nMBRIF27 0x0
#define MBRIF28 0x1000 /* Mailbox 28 Mailbox Receive Interrupt Flag */
-#define nMBRIF28 0x0
#define MBRIF29 0x2000 /* Mailbox 29 Mailbox Receive Interrupt Flag */
-#define nMBRIF29 0x0
#define MBRIF30 0x4000 /* Mailbox 30 Mailbox Receive Interrupt Flag */
-#define nMBRIF30 0x0
#define MBRIF31 0x8000 /* Mailbox 31 Mailbox Receive Interrupt Flag */
-#define nMBRIF31 0x0
/* Bit masks for EPPIx_STATUS */
#define CFIFO_ERR 0x1 /* Chroma FIFO Error */
-#define nCFIFO_ERR 0x0
#define YFIFO_ERR 0x2 /* Luma FIFO Error */
-#define nYFIFO_ERR 0x0
#define LTERR_OVR 0x4 /* Line Track Overflow */
-#define nLTERR_OVR 0x0
#define LTERR_UNDR 0x8 /* Line Track Underflow */
-#define nLTERR_UNDR 0x0
#define FTERR_OVR 0x10 /* Frame Track Overflow */
-#define nFTERR_OVR 0x0
#define FTERR_UNDR 0x20 /* Frame Track Underflow */
-#define nFTERR_UNDR 0x0
#define ERR_NCOR 0x40 /* Preamble Error Not Corrected */
-#define nERR_NCOR 0x0
#define DMA1URQ 0x80 /* DMA1 Urgent Request */
-#define nDMA1URQ 0x0
#define DMA0URQ 0x100 /* DMA0 Urgent Request */
-#define nDMA0URQ 0x0
#define ERR_DET 0x4000 /* Preamble Error Detected */
-#define nERR_DET 0x0
#define FLD 0x8000 /* Field */
-#define nFLD 0x0
/* Bit masks for EPPIx_CONTROL */
#define EPPI_EN 0x1 /* Enable */
-#define nEPPI_EN 0x0
#define EPPI_DIR 0x2 /* Direction */
-#define nEPPI_DIR 0x0
#define XFR_TYPE 0xc /* Operating Mode */
#define FS_CFG 0x30 /* Frame Sync Configuration */
#define FLD_SEL 0x40 /* Field Select/Trigger */
-#define nFLD_SEL 0x0
#define ITU_TYPE 0x80 /* ITU Interlaced or Progressive */
-#define nITU_TYPE 0x0
#define BLANKGEN 0x100 /* ITU Output Mode with Internal Blanking Generation */
-#define nBLANKGEN 0x0
#define ICLKGEN 0x200 /* Internal Clock Generation */
-#define nICLKGEN 0x0
#define IFSGEN 0x400 /* Internal Frame Sync Generation */
-#define nIFSGEN 0x0
#define POLC 0x1800 /* Frame Sync and Data Driving/Sampling Edges */
#define POLS 0x6000 /* Frame Sync Polarity */
#define DLENGTH 0x38000 /* Data Length */
#define SKIP_EN 0x40000 /* Skip Enable */
-#define nSKIP_EN 0x0
#define SKIP_EO 0x80000 /* Skip Even or Odd */
-#define nSKIP_EO 0x0
#define PACKEN 0x100000 /* Packing/Unpacking Enable */
-#define nPACKEN 0x0
#define SWAPEN 0x200000 /* Swap Enable */
-#define nSWAPEN 0x0
#define SIGN_EXT 0x400000 /* Sign Extension or Zero-filled / Data Split Format */
-#define nSIGN_EXT 0x0
#define SPLT_EVEN_ODD 0x800000 /* Split Even and Odd Data Samples */
-#define nSPLT_EVEN_ODD 0x0
#define SUBSPLT_ODD 0x1000000 /* Sub-split Odd Samples */
-#define nSUBSPLT_ODD 0x0
#define DMACFG 0x2000000 /* One or Two DMA Channels Mode */
-#define nDMACFG 0x0
#define RGB_FMT_EN 0x4000000 /* RGB Formatting Enable */
-#define nRGB_FMT_EN 0x0
#define FIFO_RWM 0x18000000 /* FIFO Regular Watermarks */
#define FIFO_UWM 0x60000000 /* FIFO Urgent Watermarks */
+#define DLEN_8 (0 << 15) /* 000 - 8 bits */
+#define DLEN_10 (1 << 15) /* 001 - 10 bits */
+#define DLEN_12 (2 << 15) /* 010 - 12 bits */
+#define DLEN_14 (3 << 15) /* 011 - 14 bits */
+#define DLEN_16 (4 << 15) /* 100 - 16 bits */
+#define DLEN_18 (5 << 15) /* 101 - 18 bits */
+#define DLEN_24 (6 << 15) /* 110 - 24 bits */
+
+
/* Bit masks for EPPIx_FS2W_LVB */
#define F1VB_BD 0xff /* Vertical Blanking before Field 1 Active Data */
/* Bit masks for SPIx_CTL */
#define SPE 0x4000 /* SPI Enable */
-#define nSPE 0x0
#define WOM 0x2000 /* Write Open Drain Master */
-#define nWOM 0x0
#define MSTR 0x1000 /* Master Mode */
-#define nMSTR 0x0
#define CPOL 0x800 /* Clock Polarity */
-#define nCPOL 0x0
#define CPHA 0x400 /* Clock Phase */
-#define nCPHA 0x0
#define LSBF 0x200 /* LSB First */
-#define nLSBF 0x0
#define SIZE 0x100 /* Size of Words */
-#define nSIZE 0x0
#define EMISO 0x20 /* Enable MISO Output */
-#define nEMISO 0x0
#define PSSE 0x10 /* Slave-Select Enable */
-#define nPSSE 0x0
#define GM 0x8 /* Get More Data */
-#define nGM 0x0
#define SZ 0x4 /* Send Zero */
-#define nSZ 0x0
#define TIMOD 0x3 /* Transfer Initiation Mode */
/* Bit masks for SPIx_FLG */
#define FLS1 0x2 /* Slave Select Enable 1 */
-#define nFLS1 0x0
#define FLS2 0x4 /* Slave Select Enable 2 */
-#define nFLS2 0x0
#define FLS3 0x8 /* Slave Select Enable 3 */
-#define nFLS3 0x0
#define FLG1 0x200 /* Slave Select Value 1 */
-#define nFLG1 0x0
#define FLG2 0x400 /* Slave Select Value 2 */
-#define nFLG2 0x0
#define FLG3 0x800 /* Slave Select Value 3 */
-#define nFLG3 0x0
/* Bit masks for SPIx_STAT */
#define TXCOL 0x40 /* Transmit Collision Error */
-#define nTXCOL 0x0
#define RXS 0x20 /* RDBR Data Buffer Status */
-#define nRXS 0x0
#define RBSY 0x10 /* Receive Error */
-#define nRBSY 0x0
#define TXS 0x8 /* TDBR Data Buffer Status */
-#define nTXS 0x0
#define TXE 0x4 /* Transmission Error */
-#define nTXE 0x0
#define MODF 0x2 /* Mode Fault Error */
-#define nMODF 0x0
#define SPIF 0x1 /* SPI Finished */
-#define nSPIF 0x0
/* Bit masks for SPIx_TDBR */
#define PRESCALE 0x7f /* Prescale Value */
#define TWI_ENA 0x80 /* TWI Enable */
-#define nTWI_ENA 0x0
#define SCCB 0x200 /* Serial Camera Control Bus */
-#define nSCCB 0x0
/* Bit maskes for TWIx_CLKDIV */
/* Bit maskes for TWIx_SLAVE_CTL */
#define SEN 0x1 /* Slave Enable */
-#define nSEN 0x0
#define STDVAL 0x4 /* Slave Transmit Data Valid */
-#define nSTDVAL 0x0
#define NAK 0x8 /* Not Acknowledge */
-#define nNAK 0x0
#define GEN 0x10 /* General Call Enable */
-#define nGEN 0x0
/* Bit maskes for TWIx_SLAVE_ADDR */
/* Bit maskes for TWIx_SLAVE_STAT */
#define SDIR 0x1 /* Slave Transfer Direction */
-#define nSDIR 0x0
#define GCALL 0x2 /* General Call */
-#define nGCALL 0x0
/* Bit maskes for TWIx_MASTER_CTL */
#define MEN 0x1 /* Master Mode Enable */
-#define nMEN 0x0
#define MDIR 0x4 /* Master Transfer Direction */
-#define nMDIR 0x0
#define FAST 0x8 /* Fast Mode */
-#define nFAST 0x0
#define STOP 0x10 /* Issue Stop Condition */
-#define nSTOP 0x0
#define RSTART 0x20 /* Repeat Start */
-#define nRSTART 0x0
#define DCNT 0x3fc0 /* Data Transfer Count */
#define SDAOVR 0x4000 /* Serial Data Override */
-#define nSDAOVR 0x0
#define SCLOVR 0x8000 /* Serial Clock Override */
-#define nSCLOVR 0x0
/* Bit maskes for TWIx_MASTER_ADDR */
/* Bit maskes for TWIx_MASTER_STAT */
#define MPROG 0x1 /* Master Transfer in Progress */
-#define nMPROG 0x0
#define LOSTARB 0x2 /* Lost Arbitration */
-#define nLOSTARB 0x0
#define ANAK 0x4 /* Address Not Acknowledged */
-#define nANAK 0x0
#define DNAK 0x8 /* Data Not Acknowledged */
-#define nDNAK 0x0
#define BUFRDERR 0x10 /* Buffer Read Error */
-#define nBUFRDERR 0x0
#define BUFWRERR 0x20 /* Buffer Write Error */
-#define nBUFWRERR 0x0
#define SDASEN 0x40 /* Serial Data Sense */
-#define nSDASEN 0x0
#define SCLSEN 0x80 /* Serial Clock Sense */
-#define nSCLSEN 0x0
#define BUSBUSY 0x100 /* Bus Busy */
-#define nBUSBUSY 0x0
/* Bit maskes for TWIx_FIFO_CTL */
#define XMTFLUSH 0x1 /* Transmit Buffer Flush */
-#define nXMTFLUSH 0x0
#define RCVFLUSH 0x2 /* Receive Buffer Flush */
-#define nRCVFLUSH 0x0
#define XMTINTLEN 0x4 /* Transmit Buffer Interrupt Length */
-#define nXMTINTLEN 0x0
#define RCVINTLEN 0x8 /* Receive Buffer Interrupt Length */
-#define nRCVINTLEN 0x0
/* Bit maskes for TWIx_FIFO_STAT */
/* Bit maskes for TWIx_INT_MASK */
#define SINITM 0x1 /* Slave Transfer Initiated Interrupt Mask */
-#define nSINITM 0x0
#define SCOMPM 0x2 /* Slave Transfer Complete Interrupt Mask */
-#define nSCOMPM 0x0
#define SERRM 0x4 /* Slave Transfer Error Interrupt Mask */
-#define nSERRM 0x0
#define SOVFM 0x8 /* Slave Overflow Interrupt Mask */
-#define nSOVFM 0x0
#define MCOMPM 0x10 /* Master Transfer Complete Interrupt Mask */
-#define nMCOMPM 0x0
#define MERRM 0x20 /* Master Transfer Error Interrupt Mask */
-#define nMERRM 0x0
#define XMTSERVM 0x40 /* Transmit FIFO Service Interrupt Mask */
-#define nXMTSERVM 0x0
#define RCVSERVM 0x80 /* Receive FIFO Service Interrupt Mask */
-#define nRCVSERVM 0x0
/* Bit maskes for TWIx_INT_STAT */
#define SINIT 0x1 /* Slave Transfer Initiated */
-#define nSINIT 0x0
#define SCOMP 0x2 /* Slave Transfer Complete */
-#define nSCOMP 0x0
#define SERR 0x4 /* Slave Transfer Error */
-#define nSERR 0x0
#define SOVF 0x8 /* Slave Overflow */
-#define nSOVF 0x0
#define MCOMP 0x10 /* Master Transfer Complete */
-#define nMCOMP 0x0
#define MERR 0x20 /* Master Transfer Error */
-#define nMERR 0x0
#define XMTSERV 0x40 /* Transmit FIFO Service */
-#define nXMTSERV 0x0
#define RCVSERV 0x80 /* Receive FIFO Service */
-#define nRCVSERV 0x0
/* Bit maskes for TWIx_XMT_DATA8 */
/* Bit masks for SPORTx_TCR1 */
#define TCKFE 0x4000 /* Clock Falling Edge Select */
-#define nTCKFE 0x0
#define LATFS 0x2000 /* Late Transmit Frame Sync */
-#define nLATFS 0x0
#define LTFS 0x1000 /* Low Transmit Frame Sync Select */
-#define nLTFS 0x0
#define DITFS 0x800 /* Data-Independent Transmit Frame Sync Select */
-#define nDITFS 0x0
#define TFSR 0x400 /* Transmit Frame Sync Required Select */
-#define nTFSR 0x0
#define ITFS 0x200 /* Internal Transmit Frame Sync Select */
-#define nITFS 0x0
#define TLSBIT 0x10 /* Transmit Bit Order */
-#define nTLSBIT 0x0
#define TDTYPE 0xc /* Data Formatting Type Select */
#define ITCLK 0x2 /* Internal Transmit Clock Select */
-#define nITCLK 0x0
#define TSPEN 0x1 /* Transmit Enable */
-#define nTSPEN 0x0
/* Bit masks for SPORTx_TCR2 */
#define TRFST 0x400 /* Left/Right Order */
-#define nTRFST 0x0
#define TSFSE 0x200 /* Transmit Stereo Frame Sync Enable */
-#define nTSFSE 0x0
#define TXSE 0x100 /* TxSEC Enable */
-#define nTXSE 0x0
#define SLEN_T 0x1f /* SPORT Word Length */
/* Bit masks for SPORTx_RCR1 */
#define RCKFE 0x4000 /* Clock Falling Edge Select */
-#define nRCKFE 0x0
#define LARFS 0x2000 /* Late Receive Frame Sync */
-#define nLARFS 0x0
#define LRFS 0x1000 /* Low Receive Frame Sync Select */
-#define nLRFS 0x0
#define RFSR 0x400 /* Receive Frame Sync Required Select */
-#define nRFSR 0x0
#define IRFS 0x200 /* Internal Receive Frame Sync Select */
-#define nIRFS 0x0
#define RLSBIT 0x10 /* Receive Bit Order */
-#define nRLSBIT 0x0
#define RDTYPE 0xc /* Data Formatting Type Select */
#define IRCLK 0x2 /* Internal Receive Clock Select */
-#define nIRCLK 0x0
#define RSPEN 0x1 /* Receive Enable */
-#define nRSPEN 0x0
/* Bit masks for SPORTx_RCR2 */
#define RRFST 0x400 /* Left/Right Order */
-#define nRRFST 0x0
#define RSFSE 0x200 /* Receive Stereo Frame Sync Enable */
-#define nRSFSE 0x0
#define RXSE 0x100 /* RxSEC Enable */
-#define nRXSE 0x0
#define SLEN_R 0x1f /* SPORT Word Length */
/* Bit masks for SPORTx_STAT */
#define TXHRE 0x40 /* Transmit Hold Register Empty */
-#define nTXHRE 0x0
#define TOVF 0x20 /* Sticky Transmit Overflow Status */
-#define nTOVF 0x0
#define TUVF 0x10 /* Sticky Transmit Underflow Status */
-#define nTUVF 0x0
#define TXF 0x8 /* Transmit FIFO Full Status */
-#define nTXF 0x0
#define ROVF 0x4 /* Sticky Receive Overflow Status */
-#define nROVF 0x0
#define RUVF 0x2 /* Sticky Receive Underflow Status */
-#define nRUVF 0x0
#define RXNE 0x1 /* Receive FIFO Not Empty Status */
-#define nRXNE 0x0
/* Bit masks for SPORTx_MCMC1 */
#define MFD 0xf000 /* Multi channel Frame Delay */
#define FSDR 0x80 /* Frame Sync to Data Relationship */
-#define nFSDR 0x0
#define MCMEM 0x10 /* Multi channel Frame Mode Enable */
-#define nMCMEM 0x0
#define MCDRXPE 0x8 /* Multi channel DMA Receive Packing */
-#define nMCDRXPE 0x0
#define MCDTXPE 0x4 /* Multi channel DMA Transmit Packing */
-#define nMCDTXPE 0x0
#define MCCRM 0x3 /* 2X Clock Recovery Mode */
/* Bit masks for SPORTx_CHNL */
#define WLS 0x3 /* Word Length Select */
#endif
#define STB 0x4 /* Stop Bits */
-#define nSTB 0x0
#define PEN 0x8 /* Parity Enable */
-#define nPEN 0x0
#define EPS 0x10 /* Even Parity Select */
-#define nEPS 0x0
#define STP 0x20 /* Sticky Parity */
-#define nSTP 0x0
#define SB 0x40 /* Set Break */
-#define nSB 0x0
/* Bit masks for UARTx_MCR */
#define XOFF 0x1 /* Transmitter Off */
-#define nXOFF 0x0
#define MRTS 0x2 /* Manual Request To Send */
-#define nMRTS 0x0
#define RFIT 0x4 /* Receive FIFO IRQ Threshold */
-#define nRFIT 0x0
#define RFRT 0x8 /* Receive FIFO RTS Threshold */
-#define nRFRT 0x0
#define LOOP_ENA 0x10 /* Loopback Mode Enable */
-#define nLOOP_ENA 0x0
#define FCPOL 0x20 /* Flow Control Pin Polarity */
-#define nFCPOL 0x0
#define ARTS 0x40 /* Automatic Request To Send */
-#define nARTS 0x0
#define ACTS 0x80 /* Automatic Clear To Send */
-#define nACTS 0x0
/* Bit masks for UARTx_LSR */
#define DR 0x1 /* Data Ready */
-#define nDR 0x0
#define OE 0x2 /* Overrun Error */
-#define nOE 0x0
#define PE 0x4 /* Parity Error */
-#define nPE 0x0
#define FE 0x8 /* Framing Error */
-#define nFE 0x0
#define BI 0x10 /* Break Interrupt */
-#define nBI 0x0
#define THRE 0x20 /* THR Empty */
-#define nTHRE 0x0
#define TEMT 0x40 /* Transmitter Empty */
-#define nTEMT 0x0
#define TFI 0x80 /* Transmission Finished Indicator */
-#define nTFI 0x0
/* Bit masks for UARTx_MSR */
#define SCTS 0x1 /* Sticky CTS */
-#define nSCTS 0x0
#define CTS 0x10 /* Clear To Send */
-#define nCTS 0x0
#define RFCS 0x20 /* Receive FIFO Count Status */
-#define nRFCS 0x0
-
-/* Bit masks for UARTx_IER_SET */
-
-#define ERBFI_S 0x1 /* Enable Receive Buffer Full Interrupt */
-#define nERBFI_S 0x0
-#define ETBEI_S 0x2 /* Enable Transmit Buffer Empty Interrupt */
-#define nETBEI_S 0x0
-#define ELSI_S 0x4 /* Enable Receive Status Interrupt */
-#define nELSI_S 0x0
-#define EDSSI_S 0x8 /* Enable Modem Status Interrupt */
-#define nEDSSI_S 0x0
-#define EDTPTI_S 0x10 /* Enable DMA Transmit PIRQ Interrupt */
-#define nEDTPTI_S 0x0
-#define ETFI_S 0x20 /* Enable Transmission Finished Interrupt */
-#define nETFI_S 0x0
-#define ERFCI_S 0x40 /* Enable Receive FIFO Count Interrupt */
-#define nERFCI_S 0x0
-
-/* Bit masks for UARTx_IER_CLEAR */
-
-#define ERBFI_C 0x1 /* Enable Receive Buffer Full Interrupt */
-#define nERBFI_C 0x0
-#define ETBEI_C 0x2 /* Enable Transmit Buffer Empty Interrupt */
-#define nETBEI_C 0x0
-#define ELSI_C 0x4 /* Enable Receive Status Interrupt */
-#define nELSI_C 0x0
-#define EDSSI_C 0x8 /* Enable Modem Status Interrupt */
-#define nEDSSI_C 0x0
-#define EDTPTI_C 0x10 /* Enable DMA Transmit PIRQ Interrupt */
-#define nEDTPTI_C 0x0
-#define ETFI_C 0x20 /* Enable Transmission Finished Interrupt */
-#define nETFI_C 0x0
-#define ERFCI_C 0x40 /* Enable Receive FIFO Count Interrupt */
-#define nERFCI_C 0x0
+
+/* Bit masks for UARTx_IER_SET & UARTx_IER_CLEAR */
+
+#define ERBFI 0x1 /* Enable Receive Buffer Full Interrupt */
+#define ETBEI 0x2 /* Enable Transmit Buffer Empty Interrupt */
+#define ELSI 0x4 /* Enable Receive Status Interrupt */
+#define EDSSI 0x8 /* Enable Modem Status Interrupt */
+#define EDTPTI 0x10 /* Enable DMA Transmit PIRQ Interrupt */
+#define ETFI 0x20 /* Enable Transmission Finished Interrupt */
+#define ERFCI 0x40 /* Enable Receive FIFO Count Interrupt */
/* Bit masks for UARTx_GCTL */
#define UCEN 0x1 /* UART Enable */
-#define nUCEN 0x0
#define IREN 0x2 /* IrDA Mode Enable */
-#define nIREN 0x0
#define TPOLC 0x4 /* IrDA TX Polarity Change */
-#define nTPOLC 0x0
#define RPOLC 0x8 /* IrDA RX Polarity Change */
-#define nRPOLC 0x0
#define FPE 0x10 /* Force Parity Error */
-#define nFPE 0x0
#define FFE 0x20 /* Force Framing Error */
-#define nFFE 0x0
#define EDBO 0x40 /* Enable Divide-by-One */
-#define nEDBO 0x0
#define EGLSI 0x80 /* Enable Global LS Interrupt */
-#define nEGLSI 0x0
/* ******************************************* */
/* BCODE bit field options (SYSCFG register) */
#define BCODE_WAKEUP 0x0000 /* boot according to wake-up condition */
-#define BCODE_FULLBOOT 0x0010 /* always perform full boot */
+#define BCODE_FULLBOOT 0x0010 /* always perform full boot */
#define BCODE_QUICKBOOT 0x0020 /* always perform quick boot */
#define BCODE_NOBOOT 0x0030 /* always perform full boot */
/* CNT_COMMAND bit field options */
-
+
#define W1LCNT_ZERO 0x0001 /* write 1 to load CNT_COUNTER with zero */
#define W1LCNT_MIN 0x0004 /* write 1 to load CNT_COUNTER from CNT_MIN */
#define W1LCNT_MAX 0x0008 /* write 1 to load CNT_COUNTER from CNT_MAX */
-
+
#define W1LMIN_ZERO 0x0010 /* write 1 to load CNT_MIN with zero */
#define W1LMIN_CNT 0x0020 /* write 1 to load CNT_MIN from CNT_COUNTER */
#define W1LMIN_MAX 0x0080 /* write 1 to load CNT_MIN from CNT_MAX */
-
+
#define W1LMAX_ZERO 0x0100 /* write 1 to load CNT_MAX with zero */
#define W1LMAX_CNT 0x0200 /* write 1 to load CNT_MAX from CNT_COUNTER */
#define W1LMAX_MIN 0x0400 /* write 1 to load CNT_MAX from CNT_MIN */
-
+
/* CNT_CONFIG bit field options */
-
+
#define CNTMODE_QUADENC 0x0000 /* quadrature encoder mode */
#define CNTMODE_BINENC 0x0100 /* binary encoder mode */
#define CNTMODE_UDCNT 0x0200 /* up/down counter mode */
#define CNTMODE_DIRCNT 0x0400 /* direction counter mode */
#define CNTMODE_DIRTMR 0x0500 /* direction timer mode */
-
+
#define BNDMODE_COMP 0x0000 /* boundary compare mode */
#define BNDMODE_ZERO 0x1000 /* boundary compare and zero mode */
#define BNDMODE_CAPT 0x2000 /* boundary capture mode */
#define EXT_CLK 0x0003
/* UARTx_LCR bit field options */
-
+
#define WLS_5 0x0000 /* 5 data bits */
#define WLS_6 0x0001 /* 6 data bits */
#define WLS_7 0x0002 /* 7 data bits */
#define PIQ30 0x40000000
#define PIQ31 0x80000000
-/* PORT A Bit Definitions for the registers
+/* PORT A Bit Definitions for the registers
PORTA, PORTA_SET, PORTA_CLEAR,
PORTA_DIR_SET, PORTA_DIR_CLEAR, PORTA_INEN,
PORTA_FER registers
#define PA14 0x4000
#define PA15 0x8000
-/* PORT B Bit Definitions for the registers
+/* PORT B Bit Definitions for the registers
PORTB, PORTB_SET, PORTB_CLEAR,
PORTB_DIR_SET, PORTB_DIR_CLEAR, PORTB_INEN,
PORTB_FER registers
#define PB14 0x4000
-/* PORT C Bit Definitions for the registers
+/* PORT C Bit Definitions for the registers
PORTC, PORTC_SET, PORTC_CLEAR,
PORTC_DIR_SET, PORTC_DIR_CLEAR, PORTC_INEN,
PORTC_FER registers
#define PC13 0x2000
-/* PORT D Bit Definitions for the registers
+/* PORT D Bit Definitions for the registers
PORTD, PORTD_SET, PORTD_CLEAR,
PORTD_DIR_SET, PORTD_DIR_CLEAR, PORTD_INEN,
PORTD_FER registers
#define PD14 0x4000
#define PD15 0x8000
-/* PORT E Bit Definitions for the registers
+/* PORT E Bit Definitions for the registers
PORTE, PORTE_SET, PORTE_CLEAR,
PORTE_DIR_SET, PORTE_DIR_CLEAR, PORTE_INEN,
PORTE_FER registers
#define PE14 0x4000
#define PE15 0x8000
-/* PORT F Bit Definitions for the registers
+/* PORT F Bit Definitions for the registers
PORTF, PORTF_SET, PORTF_CLEAR,
PORTF_DIR_SET, PORTF_DIR_CLEAR, PORTF_INEN,
PORTF_FER registers
#define PF14 0x4000
#define PF15 0x8000
-/* PORT G Bit Definitions for the registers
+/* PORT G Bit Definitions for the registers
PORTG, PORTG_SET, PORTG_CLEAR,
PORTG_DIR_SET, PORTG_DIR_CLEAR, PORTG_INEN,
PORTG_FER registers
#define PG14 0x4000
#define PG15 0x8000
-/* PORT H Bit Definitions for the registers
+/* PORT H Bit Definitions for the registers
PORTH, PORTH_SET, PORTH_CLEAR,
PORTH_DIR_SET, PORTH_DIR_CLEAR, PORTH_INEN,
PORTH_FER registers
#define PH13 0x2000
-/* PORT I Bit Definitions for the registers
+/* PORT I Bit Definitions for the registers
PORTI, PORTI_SET, PORTI_CLEAR,
PORTI_DIR_SET, PORTI_DIR_CLEAR, PORTI_INEN,
PORTI_FER registers
#define PI14 0x4000
#define PI15 0x8000
-/* PORT J Bit Definitions for the registers
+/* PORT J Bit Definitions for the registers
PORTJ, PORTJ_SET, PORTJ_CLEAR,
PORTJ_DIR_SET, PORTJ_DIR_CLEAR, PORTJ_INEN,
PORTJ_FER registers
#define PJ11 0x0800
#define PJ12 0x1000
#define PJ13 0x2000
-
+
/* Port Muxing Bit Fields for PORTx_MUX Registers */
#define B0MAP_PIL 0x00000006 /* Map Port I Low to Byte 0 */
#define B0MAP_PJL 0x00000007 /* Map Port J Low to Byte 0 */
-#define B1MAP_PCH 0x00000000 /* Map Port C High to Byte 1 */
+#define B1MAP_PCH 0x00000000 /* Map Port C High to Byte 1 */
#define B1MAP_PDH 0x00000100 /* Map Port D High to Byte 1 */
#define B1MAP_PEH 0x00000200 /* Map Port E High to Byte 1 */
#define B1MAP_PFH 0x00000300 /* Map Port F High to Byte 1 */
#define B1MAP_PIH 0x00000600 /* Map Port I High to Byte 1 */
#define B1MAP_PJH 0x00000700 /* Map Port J High to Byte 1 */
-#define B2MAP_PCL 0x00000000 /* Map Port C Low to Byte 2 */
-#define B2MAP_PDL 0x00010000 /* Map Port D Low to Byte 2 */
-#define B2MAP_PEL 0x00020000 /* Map Port E Low to Byte 2 */
-#define B2MAP_PFL 0x00030000 /* Map Port F Low to Byte 2 */
-#define B2MAP_PGL 0x00040000 /* Map Port G Low to Byte 2 */
-#define B2MAP_PHL 0x00050000 /* Map Port H Low to Byte 2 */
-#define B2MAP_PIL 0x00060000 /* Map Port I Low to Byte 2 */
-#define B2MAP_PJL 0x00070000 /* Map Port J Low to Byte 2 */
-
-#define B3MAP_PCH 0x00000000 /* Map Port C High to Byte 3 */
-#define B3MAP_PDH 0x01000000 /* Map Port D High to Byte 3 */
-#define B3MAP_PEH 0x02000000 /* Map Port E High to Byte 3 */
-#define B3MAP_PFH 0x03000000 /* Map Port F High to Byte 3 */
-#define B3MAP_PGH 0x04000000 /* Map Port G High to Byte 3 */
-#define B3MAP_PHH 0x05000000 /* Map Port H High to Byte 3 */
-#define B3MAP_PIH 0x06000000 /* Map Port I High to Byte 3 */
-#define B3MAP_PJH 0x07000000 /* Map Port J High to Byte 3 */
+#define B2MAP_PCL 0x00000000 /* Map Port C Low to Byte 2 */
+#define B2MAP_PDL 0x00010000 /* Map Port D Low to Byte 2 */
+#define B2MAP_PEL 0x00020000 /* Map Port E Low to Byte 2 */
+#define B2MAP_PFL 0x00030000 /* Map Port F Low to Byte 2 */
+#define B2MAP_PGL 0x00040000 /* Map Port G Low to Byte 2 */
+#define B2MAP_PHL 0x00050000 /* Map Port H Low to Byte 2 */
+#define B2MAP_PIL 0x00060000 /* Map Port I Low to Byte 2 */
+#define B2MAP_PJL 0x00070000 /* Map Port J Low to Byte 2 */
+
+#define B3MAP_PCH 0x00000000 /* Map Port C High to Byte 3 */
+#define B3MAP_PDH 0x01000000 /* Map Port D High to Byte 3 */
+#define B3MAP_PEH 0x02000000 /* Map Port E High to Byte 3 */
+#define B3MAP_PFH 0x03000000 /* Map Port F High to Byte 3 */
+#define B3MAP_PGH 0x04000000 /* Map Port G High to Byte 3 */
+#define B3MAP_PHH 0x05000000 /* Map Port H High to Byte 3 */
+#define B3MAP_PIH 0x06000000 /* Map Port I High to Byte 3 */
+#define B3MAP_PJH 0x07000000 /* Map Port J High to Byte 3 */
/* for legacy compatibility */
-
+
#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
#define W1LMAX_MAX W1LMAX_MIN
#define EBIU_AMCBCTL0 EBIU_AMBCTL0
--- /dev/null
+/*
+ * file: include/asm-blackfin/mach-bf548/dma.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ * system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MACH_DMA_H_
+#define _MACH_DMA_H_
+
+#define CH_SPORT0_RX 0
+#define CH_SPORT0_TX 1
+#define CH_SPORT1_RX 2
+#define CH_SPORT1_TX 3
+#define CH_SPI0 4
+#define CH_SPI1 5
+#define CH_UART0_RX 6
+#define CH_UART0_TX 7
+#define CH_UART1_RX 8
+#define CH_UART1_TX 9
+#define CH_ATAPI_RX 10
+#define CH_ATAPI_TX 11
+#define CH_EPPI0 12
+#define CH_EPPI1 13
+#define CH_EPPI2 14
+#define CH_PIXC_IMAGE 15
+#define CH_PIXC_OVERLAY 16
+#define CH_PIXC_OUTPUT 17
+#define CH_SPORT2_RX 18
+#define CH_SPORT2_TX 19
+#define CH_SPORT3_RX 20
+#define CH_SPORT3_TX 21
+#define CH_SDH 22
+#define CH_SPI2 23
+
+#define CH_MEM_STREAM0_DEST 24
+#define CH_MEM_STREAM0_SRC 25
+#define CH_MEM_STREAM1_DEST 26
+#define CH_MEM_STREAM1_SRC 27
+#define CH_MEM_STREAM2_DEST 28
+#define CH_MEM_STREAM2_SRC 29
+#define CH_MEM_STREAM3_DEST 30
+#define CH_MEM_STREAM3_SRC 31
+
+#define MAX_BLACKFIN_DMA_CHANNEL 32
+
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+#endif
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf548/gpio.h
+ * Based on:
+ * Author: Michael Hennerich (hennerich@blackfin.uclinux.org)
+ *
+ * Created:
+ * Description:
+ *
+ * Modified:
+ * Copyright 2004-2007 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+
+
+#define GPIO_PA0 0
+#define GPIO_PA1 1
+#define GPIO_PA2 2
+#define GPIO_PA3 3
+#define GPIO_PA4 4
+#define GPIO_PA5 5
+#define GPIO_PA6 6
+#define GPIO_PA7 7
+#define GPIO_PA8 8
+#define GPIO_PA9 9
+#define GPIO_PA10 10
+#define GPIO_PA11 11
+#define GPIO_PA12 12
+#define GPIO_PA13 13
+#define GPIO_PA14 14
+#define GPIO_PA15 15
+#define GPIO_PB0 16
+#define GPIO_PB1 17
+#define GPIO_PB2 18
+#define GPIO_PB3 19
+#define GPIO_PB4 20
+#define GPIO_PB5 21
+#define GPIO_PB6 22
+#define GPIO_PB7 23
+#define GPIO_PB8 24
+#define GPIO_PB9 25
+#define GPIO_PB10 26
+#define GPIO_PB11 27
+#define GPIO_PB12 28
+#define GPIO_PB13 29
+#define GPIO_PB14 30
+#define GPIO_PB15 31 /* N/A */
+#define GPIO_PC0 32
+#define GPIO_PC1 33
+#define GPIO_PC2 34
+#define GPIO_PC3 35
+#define GPIO_PC4 36
+#define GPIO_PC5 37
+#define GPIO_PC6 38
+#define GPIO_PC7 39
+#define GPIO_PC8 40
+#define GPIO_PC9 41
+#define GPIO_PC10 42
+#define GPIO_PC11 43
+#define GPIO_PC12 44
+#define GPIO_PC13 45
+#define GPIO_PC14 46 /* N/A */
+#define GPIO_PC15 47 /* N/A */
+#define GPIO_PD0 48
+#define GPIO_PD1 49
+#define GPIO_PD2 50
+#define GPIO_PD3 51
+#define GPIO_PD4 52
+#define GPIO_PD5 53
+#define GPIO_PD6 54
+#define GPIO_PD7 55
+#define GPIO_PD8 56
+#define GPIO_PD9 57
+#define GPIO_PD10 58
+#define GPIO_PD11 59
+#define GPIO_PD12 60
+#define GPIO_PD13 61
+#define GPIO_PD14 62
+#define GPIO_PD15 63
+#define GPIO_PE0 64
+#define GPIO_PE1 65
+#define GPIO_PE2 66
+#define GPIO_PE3 67
+#define GPIO_PE4 68
+#define GPIO_PE5 69
+#define GPIO_PE6 70
+#define GPIO_PE7 71
+#define GPIO_PE8 72
+#define GPIO_PE9 73
+#define GPIO_PE10 74
+#define GPIO_PE11 75
+#define GPIO_PE12 76
+#define GPIO_PE13 77
+#define GPIO_PE14 78
+#define GPIO_PE15 79
+#define GPIO_PF0 80
+#define GPIO_PF1 81
+#define GPIO_PF2 82
+#define GPIO_PF3 83
+#define GPIO_PF4 84
+#define GPIO_PF5 85
+#define GPIO_PF6 86
+#define GPIO_PF7 87
+#define GPIO_PF8 88
+#define GPIO_PF9 89
+#define GPIO_PF10 90
+#define GPIO_PF11 91
+#define GPIO_PF12 92
+#define GPIO_PF13 93
+#define GPIO_PF14 94
+#define GPIO_PF15 95
+#define GPIO_PG0 96
+#define GPIO_PG1 97
+#define GPIO_PG2 98
+#define GPIO_PG3 99
+#define GPIO_PG4 100
+#define GPIO_PG5 101
+#define GPIO_PG6 102
+#define GPIO_PG7 103
+#define GPIO_PG8 104
+#define GPIO_PG9 105
+#define GPIO_PG10 106
+#define GPIO_PG11 107
+#define GPIO_PG12 108
+#define GPIO_PG13 109
+#define GPIO_PG14 110
+#define GPIO_PG15 111
+#define GPIO_PH0 112
+#define GPIO_PH1 113
+#define GPIO_PH2 114
+#define GPIO_PH3 115
+#define GPIO_PH4 116
+#define GPIO_PH5 117
+#define GPIO_PH6 118
+#define GPIO_PH7 119
+#define GPIO_PH8 120
+#define GPIO_PH9 121
+#define GPIO_PH10 122
+#define GPIO_PH11 123
+#define GPIO_PH12 124
+#define GPIO_PH13 125
+#define GPIO_PH14 126 /* N/A */
+#define GPIO_PH15 127 /* N/A */
+#define GPIO_PI0 128
+#define GPIO_PI1 129
+#define GPIO_PI2 130
+#define GPIO_PI3 131
+#define GPIO_PI4 132
+#define GPIO_PI5 133
+#define GPIO_PI6 134
+#define GPIO_PI7 135
+#define GPIO_PI8 136
+#define GPIO_PI9 137
+#define GPIO_PI10 138
+#define GPIO_PI11 139
+#define GPIO_PI12 140
+#define GPIO_PI13 141
+#define GPIO_PI14 142
+#define GPIO_PI15 143
+#define GPIO_PJ0 144
+#define GPIO_PJ1 145
+#define GPIO_PJ2 146
+#define GPIO_PJ3 147
+#define GPIO_PJ4 148
+#define GPIO_PJ5 149
+#define GPIO_PJ6 150
+#define GPIO_PJ7 151
+#define GPIO_PJ8 152
+#define GPIO_PJ9 153
+#define GPIO_PJ10 154
+#define GPIO_PJ11 155
+#define GPIO_PJ12 156
+#define GPIO_PJ13 157
+#define GPIO_PJ14 158 /* N/A */
+#define GPIO_PJ15 159 /* N/A */
+
+#define MAX_BLACKFIN_GPIOS 160
+
+struct gpio_port_t {
+ unsigned short port_fer;
+ unsigned short dummy1;
+ unsigned short port_data;
+ unsigned short dummy2;
+ unsigned short port_set;
+ unsigned short dummy3;
+ unsigned short port_clear;
+ unsigned short dummy4;
+ unsigned short port_dir_set;
+ unsigned short dummy5;
+ unsigned short port_dir_clear;
+ unsigned short dummy6;
+ unsigned short port_inen;
+ unsigned short dummy7;
+ unsigned int port_mux;
+};
+
+int gpio_request(unsigned short gpio, const char *label);
+void peripheral_free(unsigned short per);
+int peripheral_request_list(unsigned short per[], const char *label);
+void peripheral_free_list(unsigned short per[]);
--- /dev/null
+/*
+ * file: include/asm-blackfin/mach-bf548/irq.h
+ * based on: include/asm-blackfin/mach-bf537/irq.h
+ * author: Roy Huang (roy.huang@analog.com)
+ *
+ * created:
+ * description:
+ * system mmr register map
+ * rev:
+ *
+ * modified:
+ *
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _BF548_IRQ_H_
+#define _BF548_IRQ_H_
+
+/*
+ * Interrupt source definitions
+ Event Source Core Event Name
+Core Emulation **
+Events (highest priority) EMU 0
+ Reset RST 1
+ NMI NMI 2
+ Exception EVX 3
+ Reserved -- 4
+ Hardware Error IVHW 5
+ Core Timer IVTMR 6 *
+
+.....
+
+ Software Interrupt 1 IVG14 31
+ Software Interrupt 2 --
+ (lowest priority) IVG15 32 *
+ */
+
+#define NR_PERI_INTS (32 * 3)
+
+/* The ABSTRACT IRQ definitions */
+/** the first seven of the following are fixed, the rest you change if you need to **/
+#define IRQ_EMU 0 /* Emulation */
+#define IRQ_RST 1 /* reset */
+#define IRQ_NMI 2 /* Non Maskable */
+#define IRQ_EVX 3 /* Exception */
+#define IRQ_UNUSED 4 /* - unused interrupt*/
+#define IRQ_HWERR 5 /* Hardware Error */
+#define IRQ_CORETMR 6 /* Core timer */
+
+#define BFIN_IRQ(x) ((x) + 7)
+
+#define IRQ_PLL_WAKEUP BFIN_IRQ(0) /* PLL Wakeup Interrupt */
+#define IRQ_DMAC0_ERR BFIN_IRQ(1) /* DMAC0 Status Interrupt */
+#define IRQ_EPPI0_ERR BFIN_IRQ(2) /* EPPI0 Error Interrupt */
+#define IRQ_SPORT0_ERR BFIN_IRQ(3) /* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERR BFIN_IRQ(4) /* SPORT1 Error Interrupt */
+#define IRQ_SPI0_ERR BFIN_IRQ(5) /* SPI0 Status(Error) Interrupt */
+#define IRQ_UART0_ERR BFIN_IRQ(6) /* UART0 Status(Error) Interrupt */
+#define IRQ_RTC BFIN_IRQ(7) /* RTC Interrupt */
+#define IRQ_EPPI0 BFIN_IRQ(8) /* EPPI0 Interrupt (DMA12) */
+#define IRQ_SPORT0_RX BFIN_IRQ(9) /* SPORT0 RX Interrupt (DMA0) */
+#define IRQ_SPORT0_TX BFIN_IRQ(10) /* SPORT0 TX Interrupt (DMA1) */
+#define IRQ_SPORT1_RX BFIN_IRQ(11) /* SPORT1 RX Interrupt (DMA2) */
+#define IRQ_SPORT1_TX BFIN_IRQ(12) /* SPORT1 TX Interrupt (DMA3) */
+#define IRQ_SPI0 BFIN_IRQ(13) /* SPI0 Interrupt (DMA4) */
+#define IRQ_UART0_RX BFIN_IRQ(14) /* UART0 RX Interrupt (DMA6) */
+#define IRQ_UART0_TX BFIN_IRQ(15) /* UART0 TX Interrupt (DMA7) */
+#define IRQ_TIMER8 BFIN_IRQ(16) /* TIMER 8 Interrupt */
+#define IRQ_TIMER9 BFIN_IRQ(17) /* TIMER 9 Interrupt */
+#define IRQ_TIMER10 BFIN_IRQ(18) /* TIMER 10 Interrupt */
+#define IRQ_PINT0 BFIN_IRQ(19) /* PINT0 Interrupt */
+#define IRQ_PINT1 BFIN_IRQ(20) /* PINT1 Interrupt */
+#define IRQ_MDMAS0 BFIN_IRQ(21) /* MDMA Stream 0 Interrupt */
+#define IRQ_MDMAS1 BFIN_IRQ(22) /* MDMA Stream 1 Interrupt */
+#define IRQ_WATCHDOG BFIN_IRQ(23) /* Watchdog Interrupt */
+#define IRQ_DMAC1_ERR BFIN_IRQ(24) /* DMAC1 Status (Error) Interrupt */
+#define IRQ_SPORT2_ERR BFIN_IRQ(25) /* SPORT2 Error Interrupt */
+#define IRQ_SPORT3_ERR BFIN_IRQ(26) /* SPORT3 Error Interrupt */
+#define IRQ_MXVR_DATA BFIN_IRQ(27) /* MXVR Data Interrupt */
+#define IRQ_SPI1_ERR BFIN_IRQ(28) /* SPI1 Status (Error) Interrupt */
+#define IRQ_SPI2_ERR BFIN_IRQ(29) /* SPI2 Status (Error) Interrupt */
+#define IRQ_UART1_ERR BFIN_IRQ(30) /* UART1 Status (Error) Interrupt */
+#define IRQ_UART2_ERR BFIN_IRQ(31) /* UART2 Status (Error) Interrupt */
+#define IRQ_CAN0_ERR BFIN_IRQ(32) /* CAN0 Status (Error) Interrupt */
+#define IRQ_SPORT2_RX BFIN_IRQ(33) /* SPORT2 RX (DMA18) Interrupt */
+#define IRQ_SPORT2_TX BFIN_IRQ(34) /* SPORT2 TX (DMA19) Interrupt */
+#define IRQ_SPORT3_RX BFIN_IRQ(35) /* SPORT3 RX (DMA20) Interrupt */
+#define IRQ_SPORT3_TX BFIN_IRQ(36) /* SPORT3 TX (DMA21) Interrupt */
+#define IRQ_EPPI1 BFIN_IRQ(37) /* EPP1 (DMA13) Interrupt */
+#define IRQ_EPPI2 BFIN_IRQ(38) /* EPP2 (DMA14) Interrupt */
+#define IRQ_SPI1 BFIN_IRQ(39) /* SPI1 (DMA5) Interrupt */
+#define IRQ_SPI2 BFIN_IRQ(40) /* SPI2 (DMA23) Interrupt */
+#define IRQ_UART1_RX BFIN_IRQ(41) /* UART1 RX (DMA8) Interrupt */
+#define IRQ_UART1_TX BFIN_IRQ(42) /* UART1 TX (DMA9) Interrupt */
+#define IRQ_ATAPI_RX BFIN_IRQ(43) /* ATAPI RX (DMA10) Interrupt */
+#define IRQ_ATAPI_TX BFIN_IRQ(44) /* ATAPI TX (DMA11) Interrupt */
+#define IRQ_TWI0 BFIN_IRQ(45) /* TWI0 Interrupt */
+#define IRQ_TWI1 BFIN_IRQ(46) /* TWI1 Interrupt */
+#define IRQ_CAN0_RX BFIN_IRQ(47) /* CAN0 Receive Interrupt */
+#define IRQ_CAN0_TX BFIN_IRQ(48) /* CAN0 Transmit Interrupt */
+#define IRQ_MDMAS2 BFIN_IRQ(49) /* MDMA Stream 2 Interrupt */
+#define IRQ_MDMAS3 BFIN_IRQ(50) /* MDMA Stream 3 Interrupt */
+#define IRQ_MXVR_ERR BFIN_IRQ(51) /* MXVR Status (Error) Interrupt */
+#define IRQ_MXVR_MSG BFIN_IRQ(52) /* MXVR Message Interrupt */
+#define IRQ_MXVR_PKT BFIN_IRQ(53) /* MXVR Packet Interrupt */
+#define IRQ_EPP1_ERR BFIN_IRQ(54) /* EPPI1 Error Interrupt */
+#define IRQ_EPP2_ERR BFIN_IRQ(55) /* EPPI2 Error Interrupt */
+#define IRQ_UART3_ERR BFIN_IRQ(56) /* UART3 Status (Error) Interrupt */
+#define IRQ_HOST_ERR BFIN_IRQ(57) /* HOST Status (Error) Interrupt */
+#define IRQ_PIXC_ERR BFIN_IRQ(59) /* PIXC Status (Error) Interrupt */
+#define IRQ_NFC_ERR BFIN_IRQ(60) /* NFC Error Interrupt */
+#define IRQ_ATAPI_ERR BFIN_IRQ(61) /* ATAPI Error Interrupt */
+#define IRQ_CAN1_ERR BFIN_IRQ(62) /* CAN1 Status (Error) Interrupt */
+#define IRQ_HS_DMA_ERR BFIN_IRQ(63) /* Handshake DMA Status Interrupt */
+#define IRQ_PIXC_IN0 BFIN_IRQ(64) /* PIXC IN0 (DMA15) Interrupt */
+#define IRQ_PIXC_IN1 BFIN_IRQ(65) /* PIXC IN1 (DMA16) Interrupt */
+#define IRQ_PIXC_OUT BFIN_IRQ(66) /* PIXC OUT (DMA17) Interrupt */
+#define IRQ_SDH BFIN_IRQ(67) /* SDH/NFC (DMA22) Interrupt */
+#define IRQ_CNT BFIN_IRQ(68) /* CNT Interrupt */
+#define IRQ_KEY BFIN_IRQ(69) /* KEY Interrupt */
+#define IRQ_CAN1_RX BFIN_IRQ(70) /* CAN1 RX Interrupt */
+#define IRQ_CAN1_TX BFIN_IRQ(71) /* CAN1 TX Interrupt */
+#define IRQ_SDH_MASK0 BFIN_IRQ(72) /* SDH Mask 0 Interrupt */
+#define IRQ_SDH_MASK1 BFIN_IRQ(73) /* SDH Mask 1 Interrupt */
+#define IRQ_USB_INT0 BFIN_IRQ(75) /* USB INT0 Interrupt */
+#define IRQ_USB_INT1 BFIN_IRQ(76) /* USB INT1 Interrupt */
+#define IRQ_USB_INT2 BFIN_IRQ(77) /* USB INT2 Interrupt */
+#define IRQ_USB_DMA BFIN_IRQ(78) /* USB DMA Interrupt */
+#define IRQ_OPTSEC BFIN_IRQ(79) /* OTPSEC Interrupt */
+#define IRQ_TIMER0 BFIN_IRQ(86) /* Timer 0 Interrupt */
+#define IRQ_TIMER1 BFIN_IRQ(87) /* Timer 1 Interrupt */
+#define IRQ_TIMER2 BFIN_IRQ(88) /* Timer 2 Interrupt */
+#define IRQ_TIMER3 BFIN_IRQ(89) /* Timer 3 Interrupt */
+#define IRQ_TIMER4 BFIN_IRQ(90) /* Timer 4 Interrupt */
+#define IRQ_TIMER5 BFIN_IRQ(91) /* Timer 5 Interrupt */
+#define IRQ_TIMER6 BFIN_IRQ(92) /* Timer 6 Interrupt */
+#define IRQ_TIMER7 BFIN_IRQ(93) /* Timer 7 Interrupt */
+#define IRQ_PINT2 BFIN_IRQ(94) /* PINT2 Interrupt */
+#define IRQ_PINT3 BFIN_IRQ(95) /* PINT3 Interrupt */
+
+#define SYS_IRQS IRQ_PINT3
+
+#define BFIN_PA_IRQ(x) ((x) + SYS_IRQS + 1)
+#define IRQ_PA0 BFIN_PA_IRQ(0)
+#define IRQ_PA1 BFIN_PA_IRQ(1)
+#define IRQ_PA2 BFIN_PA_IRQ(2)
+#define IRQ_PA3 BFIN_PA_IRQ(3)
+#define IRQ_PA4 BFIN_PA_IRQ(4)
+#define IRQ_PA5 BFIN_PA_IRQ(5)
+#define IRQ_PA6 BFIN_PA_IRQ(6)
+#define IRQ_PA7 BFIN_PA_IRQ(7)
+#define IRQ_PA8 BFIN_PA_IRQ(8)
+#define IRQ_PA9 BFIN_PA_IRQ(9)
+#define IRQ_PA10 BFIN_PA_IRQ(10)
+#define IRQ_PA11 BFIN_PA_IRQ(11)
+#define IRQ_PA12 BFIN_PA_IRQ(12)
+#define IRQ_PA13 BFIN_PA_IRQ(13)
+#define IRQ_PA14 BFIN_PA_IRQ(14)
+#define IRQ_PA15 BFIN_PA_IRQ(15)
+
+#define BFIN_PB_IRQ(x) ((x) + IRQ_PA15 + 1)
+#define IRQ_PB0 BFIN_PB_IRQ(0)
+#define IRQ_PB1 BFIN_PB_IRQ(1)
+#define IRQ_PB2 BFIN_PB_IRQ(2)
+#define IRQ_PB3 BFIN_PB_IRQ(3)
+#define IRQ_PB4 BFIN_PB_IRQ(4)
+#define IRQ_PB5 BFIN_PB_IRQ(5)
+#define IRQ_PB6 BFIN_PB_IRQ(6)
+#define IRQ_PB7 BFIN_PB_IRQ(7)
+#define IRQ_PB8 BFIN_PB_IRQ(8)
+#define IRQ_PB9 BFIN_PB_IRQ(9)
+#define IRQ_PB10 BFIN_PB_IRQ(10)
+#define IRQ_PB11 BFIN_PB_IRQ(11)
+#define IRQ_PB12 BFIN_PB_IRQ(12)
+#define IRQ_PB13 BFIN_PB_IRQ(13)
+#define IRQ_PB14 BFIN_PB_IRQ(14)
+#define IRQ_PB15 BFIN_PB_IRQ(15) /* N/A */
+
+#define BFIN_PC_IRQ(x) ((x) + IRQ_PB15 + 1)
+#define IRQ_PC0 BFIN_PC_IRQ(0)
+#define IRQ_PC1 BFIN_PC_IRQ(1)
+#define IRQ_PC2 BFIN_PC_IRQ(2)
+#define IRQ_PC3 BFIN_PC_IRQ(3)
+#define IRQ_PC4 BFIN_PC_IRQ(4)
+#define IRQ_PC5 BFIN_PC_IRQ(5)
+#define IRQ_PC6 BFIN_PC_IRQ(6)
+#define IRQ_PC7 BFIN_PC_IRQ(7)
+#define IRQ_PC8 BFIN_PC_IRQ(8)
+#define IRQ_PC9 BFIN_PC_IRQ(9)
+#define IRQ_PC10 BFIN_PC_IRQ(10)
+#define IRQ_PC11 BFIN_PC_IRQ(11)
+#define IRQ_PC12 BFIN_PC_IRQ(12)
+#define IRQ_PC13 BFIN_PC_IRQ(13)
+#define IRQ_PC14 BFIN_PC_IRQ(14) /* N/A */
+#define IRQ_PC15 BFIN_PC_IRQ(15) /* N/A */
+
+#define BFIN_PD_IRQ(x) ((x) + IRQ_PC15 + 1)
+#define IRQ_PD0 BFIN_PD_IRQ(0)
+#define IRQ_PD1 BFIN_PD_IRQ(1)
+#define IRQ_PD2 BFIN_PD_IRQ(2)
+#define IRQ_PD3 BFIN_PD_IRQ(3)
+#define IRQ_PD4 BFIN_PD_IRQ(4)
+#define IRQ_PD5 BFIN_PD_IRQ(5)
+#define IRQ_PD6 BFIN_PD_IRQ(6)
+#define IRQ_PD7 BFIN_PD_IRQ(7)
+#define IRQ_PD8 BFIN_PD_IRQ(8)
+#define IRQ_PD9 BFIN_PD_IRQ(9)
+#define IRQ_PD10 BFIN_PD_IRQ(10)
+#define IRQ_PD11 BFIN_PD_IRQ(11)
+#define IRQ_PD12 BFIN_PD_IRQ(12)
+#define IRQ_PD13 BFIN_PD_IRQ(13)
+#define IRQ_PD14 BFIN_PD_IRQ(14)
+#define IRQ_PD15 BFIN_PD_IRQ(15)
+
+#define BFIN_PE_IRQ(x) ((x) + IRQ_PD15 + 1)
+#define IRQ_PE0 BFIN_PE_IRQ(0)
+#define IRQ_PE1 BFIN_PE_IRQ(1)
+#define IRQ_PE2 BFIN_PE_IRQ(2)
+#define IRQ_PE3 BFIN_PE_IRQ(3)
+#define IRQ_PE4 BFIN_PE_IRQ(4)
+#define IRQ_PE5 BFIN_PE_IRQ(5)
+#define IRQ_PE6 BFIN_PE_IRQ(6)
+#define IRQ_PE7 BFIN_PE_IRQ(7)
+#define IRQ_PE8 BFIN_PE_IRQ(8)
+#define IRQ_PE9 BFIN_PE_IRQ(9)
+#define IRQ_PE10 BFIN_PE_IRQ(10)
+#define IRQ_PE11 BFIN_PE_IRQ(11)
+#define IRQ_PE12 BFIN_PE_IRQ(12)
+#define IRQ_PE13 BFIN_PE_IRQ(13)
+#define IRQ_PE14 BFIN_PE_IRQ(14)
+#define IRQ_PE15 BFIN_PE_IRQ(15)
+
+#define BFIN_PF_IRQ(x) ((x) + IRQ_PE15 + 1)
+#define IRQ_PF0 BFIN_PF_IRQ(0)
+#define IRQ_PF1 BFIN_PF_IRQ(1)
+#define IRQ_PF2 BFIN_PF_IRQ(2)
+#define IRQ_PF3 BFIN_PF_IRQ(3)
+#define IRQ_PF4 BFIN_PF_IRQ(4)
+#define IRQ_PF5 BFIN_PF_IRQ(5)
+#define IRQ_PF6 BFIN_PF_IRQ(6)
+#define IRQ_PF7 BFIN_PF_IRQ(7)
+#define IRQ_PF8 BFIN_PF_IRQ(8)
+#define IRQ_PF9 BFIN_PF_IRQ(9)
+#define IRQ_PF10 BFIN_PF_IRQ(10)
+#define IRQ_PF11 BFIN_PF_IRQ(11)
+#define IRQ_PF12 BFIN_PF_IRQ(12)
+#define IRQ_PF13 BFIN_PF_IRQ(13)
+#define IRQ_PF14 BFIN_PF_IRQ(14)
+#define IRQ_PF15 BFIN_PF_IRQ(15)
+
+#define BFIN_PG_IRQ(x) ((x) + IRQ_PF15 + 1)
+#define IRQ_PG0 BFIN_PG_IRQ(0)
+#define IRQ_PG1 BFIN_PG_IRQ(1)
+#define IRQ_PG2 BFIN_PG_IRQ(2)
+#define IRQ_PG3 BFIN_PG_IRQ(3)
+#define IRQ_PG4 BFIN_PG_IRQ(4)
+#define IRQ_PG5 BFIN_PG_IRQ(5)
+#define IRQ_PG6 BFIN_PG_IRQ(6)
+#define IRQ_PG7 BFIN_PG_IRQ(7)
+#define IRQ_PG8 BFIN_PG_IRQ(8)
+#define IRQ_PG9 BFIN_PG_IRQ(9)
+#define IRQ_PG10 BFIN_PG_IRQ(10)
+#define IRQ_PG11 BFIN_PG_IRQ(11)
+#define IRQ_PG12 BFIN_PG_IRQ(12)
+#define IRQ_PG13 BFIN_PG_IRQ(13)
+#define IRQ_PG14 BFIN_PG_IRQ(14)
+#define IRQ_PG15 BFIN_PG_IRQ(15)
+
+#define BFIN_PH_IRQ(x) ((x) + IRQ_PG15 + 1)
+#define IRQ_PH0 BFIN_PH_IRQ(0)
+#define IRQ_PH1 BFIN_PH_IRQ(1)
+#define IRQ_PH2 BFIN_PH_IRQ(2)
+#define IRQ_PH3 BFIN_PH_IRQ(3)
+#define IRQ_PH4 BFIN_PH_IRQ(4)
+#define IRQ_PH5 BFIN_PH_IRQ(5)
+#define IRQ_PH6 BFIN_PH_IRQ(6)
+#define IRQ_PH7 BFIN_PH_IRQ(7)
+#define IRQ_PH8 BFIN_PH_IRQ(8)
+#define IRQ_PH9 BFIN_PH_IRQ(9)
+#define IRQ_PH10 BFIN_PH_IRQ(10)
+#define IRQ_PH11 BFIN_PH_IRQ(11)
+#define IRQ_PH12 BFIN_PH_IRQ(12)
+#define IRQ_PH13 BFIN_PH_IRQ(13)
+#define IRQ_PH14 BFIN_PH_IRQ(14) /* N/A */
+#define IRQ_PH15 BFIN_PH_IRQ(15) /* N/A */
+
+#define BFIN_PI_IRQ(x) ((x) + IRQ_PH15 + 1)
+#define IRQ_PI0 BFIN_PI_IRQ(0)
+#define IRQ_PI1 BFIN_PI_IRQ(1)
+#define IRQ_PI2 BFIN_PI_IRQ(2)
+#define IRQ_PI3 BFIN_PI_IRQ(3)
+#define IRQ_PI4 BFIN_PI_IRQ(4)
+#define IRQ_PI5 BFIN_PI_IRQ(5)
+#define IRQ_PI6 BFIN_PI_IRQ(6)
+#define IRQ_PI7 BFIN_PI_IRQ(7)
+#define IRQ_PI8 BFIN_PI_IRQ(8)
+#define IRQ_PI9 BFIN_PI_IRQ(9)
+#define IRQ_PI10 BFIN_PI_IRQ(10)
+#define IRQ_PI11 BFIN_PI_IRQ(11)
+#define IRQ_PI12 BFIN_PI_IRQ(12)
+#define IRQ_PI13 BFIN_PI_IRQ(13)
+#define IRQ_PI14 BFIN_PI_IRQ(14)
+#define IRQ_PI15 BFIN_PI_IRQ(15)
+
+#define BFIN_PJ_IRQ(x) ((x) + IRQ_PI15 + 1)
+#define IRQ_PJ0 BFIN_PJ_IRQ(0)
+#define IRQ_PJ1 BFIN_PJ_IRQ(1)
+#define IRQ_PJ2 BFIN_PJ_IRQ(2)
+#define IRQ_PJ3 BFIN_PJ_IRQ(3)
+#define IRQ_PJ4 BFIN_PJ_IRQ(4)
+#define IRQ_PJ5 BFIN_PJ_IRQ(5)
+#define IRQ_PJ6 BFIN_PJ_IRQ(6)
+#define IRQ_PJ7 BFIN_PJ_IRQ(7)
+#define IRQ_PJ8 BFIN_PJ_IRQ(8)
+#define IRQ_PJ9 BFIN_PJ_IRQ(9)
+#define IRQ_PJ10 BFIN_PJ_IRQ(10)
+#define IRQ_PJ11 BFIN_PJ_IRQ(11)
+#define IRQ_PJ12 BFIN_PJ_IRQ(12)
+#define IRQ_PJ13 BFIN_PJ_IRQ(13)
+#define IRQ_PJ14 BFIN_PJ_IRQ(14) /* N/A */
+#define IRQ_PJ15 BFIN_PJ_IRQ(15) /* N/A */
+
+#ifdef CONFIG_IRQCHIP_DEMUX_GPIO
+#define NR_IRQS (IRQ_PJ15+1)
+#else
+#define NR_IRQS (SYS_IRQS+1)
+#endif
+
+#define IVG7 7
+#define IVG8 8
+#define IVG9 9
+#define IVG10 10
+#define IVG11 11
+#define IVG12 12
+#define IVG13 13
+#define IVG14 14
+#define IVG15 15
+
+/* IAR0 BIT FIELDS */
+#define IRQ_PLL_WAKEUP_POS 0
+#define IRQ_DMAC0_ERR_POS 4
+#define IRQ_EPPI0_ERR_POS 8
+#define IRQ_SPORT0_ERR_POS 12
+#define IRQ_SPORT1_ERR_POS 16
+#define IRQ_SPI0_ERR_POS 20
+#define IRQ_UART0_ERR_POS 24
+#define IRQ_RTC_POS 28
+
+/* IAR1 BIT FIELDS */
+#define IRQ_EPPI0_POS 0
+#define IRQ_SPORT0_RX_POS 4
+#define IRQ_SPORT0_TX_POS 8
+#define IRQ_SPORT1_RX_POS 12
+#define IRQ_SPORT1_TX_POS 16
+#define IRQ_SPI0_POS 20
+#define IRQ_UART0_RX_POS 24
+#define IRQ_UART0_TX_POS 28
+
+/* IAR2 BIT FIELDS */
+#define IRQ_TIMER8_POS 0
+#define IRQ_TIMER9_POS 4
+#define IRQ_TIMER10_POS 8
+#define IRQ_PINT0_POS 12
+#define IRQ_PINT1_POS 16
+#define IRQ_MDMAS0_POS 20
+#define IRQ_MDMAS1_POS 24
+#define IRQ_WATCHDOG_POS 28
+
+/* IAR3 BIT FIELDS */
+#define IRQ_DMAC1_ERR_POS 0
+#define IRQ_SPORT2_ERR_POS 4
+#define IRQ_SPORT3_ERR_POS 8
+#define IRQ_MXVR_DATA_POS 12
+#define IRQ_SPI1_ERR_POS 16
+#define IRQ_SPI2_ERR_POS 20
+#define IRQ_UART1_ERR_POS 24
+#define IRQ_UART2_ERR_POS 28
+
+/* IAR4 BIT FILEDS */
+#define IRQ_CAN0_ERR_POS 0
+#define IRQ_SPORT2_RX_POS 4
+#define IRQ_SPORT2_TX_POS 8
+#define IRQ_SPORT3_RX_POS 12
+#define IRQ_SPORT3_TX_POS 16
+#define IRQ_EPPI1_POS 20
+#define IRQ_EPPI2_POS 24
+#define IRQ_SPI1_POS 28
+
+/* IAR5 BIT FIELDS */
+#define IRQ_SPI2_POS 0
+#define IRQ_UART1_RX_POS 4
+#define IRQ_UART1_TX_POS 8
+#define IRQ_ATAPI_RX_POS 12
+#define IRQ_ATAPI_TX_POS 16
+#define IRQ_TWI0_POS 20
+#define IRQ_TWI1_POS 24
+#define IRQ_CAN0_RX_POS 28
+
+/* IAR6 BIT FIELDS */
+#define IRQ_CAN0_TX_POS 0
+#define IRQ_MDMAS2_POS 4
+#define IRQ_MDMAS3_POS 8
+#define IRQ_MXVR_ERR_POS 12
+#define IRQ_MXVR_MSG_POS 16
+#define IRQ_MXVR_PKT_POS 20
+#define IRQ_EPPI1_ERR_POS 24
+#define IRQ_EPPI2_ERR_POS 28
+
+/* IAR7 BIT FIELDS */
+#define IRQ_UART3_ERR_POS 0
+#define IRQ_HOST_ERR_POS 4
+#define IRQ_PIXC_ERR_POS 12
+#define IRQ_NFC_ERR_POS 16
+#define IRQ_ATAPI_ERR_POS 20
+#define IRQ_CAN1_ERR_POS 24
+#define IRQ_HS_DMA_ERR_POS 28
+
+/* IAR8 BIT FIELDS */
+#define IRQ_PIXC_IN0_POS 0
+#define IRQ_PIXC_IN1_POS 4
+#define IRQ_PIXC_OUT_POS 8
+#define IRQ_SDH_POS 12
+#define IRQ_CNT_POS 16
+#define IRQ_KEY_POS 20
+#define IRQ_CAN1_RX_POS 24
+#define IRQ_CAN1_TX_POS 28
+
+/* IAR9 BIT FIELDS */
+#define IRQ_SDH_MASK0_POS 0
+#define IRQ_SDH_MASK1_POS 4
+#define IRQ_USB_INT0_POS 12
+#define IRQ_USB_INT1_POS 16
+#define IRQ_USB_INT2_POS 20
+#define IRQ_USB_DMA_POS 24
+#define IRQ_OTPSEC_POS 28
+
+/* IAR10 BIT FIELDS */
+#define IRQ_TIMER0_POS 24
+#define IRQ_TIMER1_POS 28
+
+/* IAR11 BIT FIELDS */
+#define IRQ_TIMER2_POS 0
+#define IRQ_TIMER3_POS 4
+#define IRQ_TIMER4_POS 8
+#define IRQ_TIMER5_POS 12
+#define IRQ_TIMER6_POS 16
+#define IRQ_TIMER7_POS 20
+#define IRQ_PINT2_POS 24
+#define IRQ_PINT3_POS 28
+
+#endif /* _BF548_IRQ_H_ */
--- /dev/null
+/*
+ * File: include/asm-blackfin/mach-bf548/mem_init.h
+ * Based on:
+ * Author:
+ *
+ * Created:
+ * Description:
+ *
+ * Rev:
+ *
+ * Modified:
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING.
+ * If not, write to the Free Software Foundation,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+#if (CONFIG_MEM_MT46V32M16)
+
+#if defined CONFIG_CLKIN_HALF
+#define CLKIN_HALF 1
+#else
+#define CLKIN_HALF 0
+#endif
+
+#if defined CONFIG_PLL_BYPASS
+#define PLL_BYPASS 1
+#else
+#define PLL_BYPASS 0
+#endif
+
+/***************************************Currently Not Being Used *********************************/
+#define flash_EBIU_AMBCTL_WAT ((CONFIG_FLASH_SPEED_BWAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_RAT ((CONFIG_FLASH_SPEED_BRAT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_HT ((CONFIG_FLASH_SPEED_BHT * 4) / (4000000000 / CONFIG_SCLK_HZ))
+#define flash_EBIU_AMBCTL_ST ((CONFIG_FLASH_SPEED_BST * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+#define flash_EBIU_AMBCTL_TT ((CONFIG_FLASH_SPEED_BTT * 4) / (4000000000 / CONFIG_SCLK_HZ)) + 1
+
+#if (flash_EBIU_AMBCTL_TT > 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_4
+#endif
+#if (flash_EBIU_AMBCTL_TT == 3)
+#define flash_EBIU_AMBCTL0_TT B0TT_3
+#endif
+#if (flash_EBIU_AMBCTL_TT == 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_2
+#endif
+#if (flash_EBIU_AMBCTL_TT < 2)
+#define flash_EBIU_AMBCTL0_TT B0TT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_ST > 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_4
+#endif
+#if (flash_EBIU_AMBCTL_ST == 3)
+#define flash_EBIU_AMBCTL0_ST B0ST_3
+#endif
+#if (flash_EBIU_AMBCTL_ST == 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_2
+#endif
+#if (flash_EBIU_AMBCTL_ST < 2)
+#define flash_EBIU_AMBCTL0_ST B0ST_1
+#endif
+
+#if (flash_EBIU_AMBCTL_HT > 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_3
+#endif
+#if (flash_EBIU_AMBCTL_HT == 2)
+#define flash_EBIU_AMBCTL0_HT B0HT_2
+#endif
+#if (flash_EBIU_AMBCTL_HT == 1)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT == 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_0
+#endif
+#if (flash_EBIU_AMBCTL_HT == 0 && CONFIG_FLASH_SPEED_BHT != 0)
+#define flash_EBIU_AMBCTL0_HT B0HT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_WAT > 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_15
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 14)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_14
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 13)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_13
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 12)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_12
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 11)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_11
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 10)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_10
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 9)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_9
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 8)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_8
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 7)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_7
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 6)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_6
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 5)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_5
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 4)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_4
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 3)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_3
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 2)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_2
+#endif
+#if (flash_EBIU_AMBCTL_WAT == 1)
+#define flash_EBIU_AMBCTL0_WAT B0WAT_1
+#endif
+
+#if (flash_EBIU_AMBCTL_RAT > 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_15
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 14)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_14
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 13)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_13
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 12)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_12
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 11)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_11
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 10)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_10
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 9)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_9
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 8)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_8
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 7)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_7
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 6)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_6
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 5)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_5
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 4)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_4
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 3)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_3
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 2)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_2
+#endif
+#if (flash_EBIU_AMBCTL_RAT == 1)
+#define flash_EBIU_AMBCTL0_RAT B0RAT_1
+#endif
+
+#define flash_EBIU_AMBCTL0 \
+ (flash_EBIU_AMBCTL0_WAT | flash_EBIU_AMBCTL0_RAT | flash_EBIU_AMBCTL0_HT | \
+ flash_EBIU_AMBCTL0_ST | flash_EBIU_AMBCTL0_TT | CONFIG_FLASH_SPEED_RDYEN)
--- /dev/null
+/*
+ * file: include/asm-blackfin/mach-bf548/mem_map.h
+ * based on:
+ * author:
+ *
+ * created:
+ * description:
+ * Memory MAP Common header file for blackfin BF537/6/4 of processors.
+ * rev:
+ *
+ * modified:
+ *
+ * bugs: enter bugs at http://blackfin.uclinux.org/
+ *
+ * this program is free software; you can redistribute it and/or modify
+ * it under the terms of the gnu general public license as published by
+ * the free software foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * this program is distributed in the hope that it will be useful,
+ * but without any warranty; without even the implied warranty of
+ * merchantability or fitness for a particular purpose. see the
+ * gnu general public license for more details.
+ *
+ * you should have received a copy of the gnu general public license
+ * along with this program; see the file copying.
+ * if not, write to the free software foundation,
+ * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ */
+
+#ifndef _MEM_MAP_548_H_
+#define _MEM_MAP_548_H_
+
+#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
+#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+
+/* Async Memory Banks */
+#define ASYNC_BANK3_BASE 0x2C000000 /* Async Bank 3 */
+#define ASYNC_BANK3_SIZE 0x04000000 /* 64M */
+#define ASYNC_BANK2_BASE 0x28000000 /* Async Bank 2 */
+#define ASYNC_BANK2_SIZE 0x04000000 /* 64M */
+#define ASYNC_BANK1_BASE 0x24000000 /* Async Bank 1 */
+#define ASYNC_BANK1_SIZE 0x04000000 /* 64M */
+#define ASYNC_BANK0_BASE 0x20000000 /* Async Bank 0 */
+#define ASYNC_BANK0_SIZE 0x04000000 /* 64M */
+
+/* Boot ROM Memory */
+
+#define BOOT_ROM_START 0xEF000000
+
+/* Level 1 Memory */
+
+/* Memory Map for ADSP-BF548 processors */
+#ifdef CONFIG_BLKFIN_ICACHE
+#define BLKFIN_ICACHESIZE (16*1024)
+#else
+#define BLKFIN_ICACHESIZE (0*1024)
+#endif
+
+#define L1_CODE_START 0xFFA00000
+#define L1_DATA_A_START 0xFF800000
+#define L1_DATA_B_START 0xFF900000
+
+#define L1_CODE_LENGTH 0xC000
+
+#ifdef CONFIG_BLKFIN_DCACHE
+
+#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (16*1024)
+#define BLKFIN_DSUPBANKS 1
+#else
+#define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH (0x8000 - 0x4000)
+#define L1_DATA_B_LENGTH (0x8000 - 0x4000)
+#define BLKFIN_DCACHESIZE (32*1024)
+#define BLKFIN_DSUPBANKS 2
+#endif
+
+#else
+#define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
+#define L1_DATA_A_LENGTH 0x8000
+#define L1_DATA_B_LENGTH 0x8000
+#define BLKFIN_DCACHESIZE (0*1024)
+#define BLKFIN_DSUPBANKS 0
+#endif /*CONFIG_BLKFIN_DCACHE*/
+
+/* Scratch Pad Memory */
+
+#if defined(CONFIG_BF54x)
+#define L1_SCRATCH_START 0xFFB00000
+#define L1_SCRATCH_LENGTH 0x1000
+#endif
+
+#endif/* _MEM_MAP_548_H_ */
--- /dev/null
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define P_SPORT2_TFS (P_DEFINED | P_IDENT(GPIO_PA0) | P_FUNCT(0))
+#define P_SPORT2_DTSEC (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(0))
+#define P_SPORT2_DTPRI (P_DEFINED | P_IDENT(GPIO_PA2) | P_FUNCT(0))
+#define P_SPORT2_TSCLK (P_DEFINED | P_IDENT(GPIO_PA3) | P_FUNCT(0))
+#define P_SPORT2_RFS (P_DEFINED | P_IDENT(GPIO_PA4) | P_FUNCT(0))
+#define P_SPORT2_DRSEC (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(0))
+#define P_SPORT2_DRPRI (P_DEFINED | P_IDENT(GPIO_PA6) | P_FUNCT(0))
+#define P_SPORT2_RSCLK (P_DEFINED | P_IDENT(GPIO_PA7) | P_FUNCT(0))
+#define P_SPORT3_TFS (P_DEFINED | P_IDENT(GPIO_PA8) | P_FUNCT(0))
+#define P_SPORT3_DTSEC (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(0))
+#define P_SPORT3_DTPRI (P_DEFINED | P_IDENT(GPIO_PA10) | P_FUNCT(0))
+#define P_SPORT3_TSCLK (P_DEFINED | P_IDENT(GPIO_PA11) | P_FUNCT(0))
+#define P_SPORT3_RFS (P_DEFINED | P_IDENT(GPIO_PA12) | P_FUNCT(0))
+#define P_SPORT3_DRSEC (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(0))
+#define P_SPORT3_DRPRI (P_DEFINED | P_IDENT(GPIO_PA14) | P_FUNCT(0))
+#define P_SPORT3_RSCLK (P_DEFINED | P_IDENT(GPIO_PA15) | P_FUNCT(0))
+#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PA1) | P_FUNCT(1))
+#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PA5) | P_FUNCT(1))
+#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PA9) | P_FUNCT(1))
+#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PA13) | P_FUNCT(1))
+
+#define P_TWI1_SCL (P_DEFINED | P_IDENT(GPIO_PB0) | P_FUNCT(0))
+#define P_TWI1_SDA (P_DEFINED | P_IDENT(GPIO_PB1) | P_FUNCT(0))
+#define P_UART3_RTS (P_DEFINED | P_IDENT(GPIO_PB2) | P_FUNCT(0))
+#define P_UART3_CTS (P_DEFINED | P_IDENT(GPIO_PB3) | P_FUNCT(0))
+#define P_UART2_TX (P_DEFINED | P_IDENT(GPIO_PB4) | P_FUNCT(0))
+#define P_UART2_RX (P_DEFINED | P_IDENT(GPIO_PB5) | P_FUNCT(0))
+#define P_UART3_TX (P_DEFINED | P_IDENT(GPIO_PB6) | P_FUNCT(0))
+#define P_UART3_RX (P_DEFINED | P_IDENT(GPIO_PB7) | P_FUNCT(0))
+#define P_SPI2_SS (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(0))
+#define P_SPI2_SSEL1 (P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(0))
+#define P_SPI2_SSEL2 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(0))
+#define P_SPI2_SSEL3 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(0))
+#define P_SPI2_SCK (P_DEFINED | P_IDENT(GPIO_PB12) | P_FUNCT(0))
+#define P_SPI2_MOSI (P_DEFINED | P_IDENT(GPIO_PB13) | P_FUNCT(0))
+#define P_SPI2_MISO (P_DEFINED | P_IDENT(GPIO_PB14) | P_FUNCT(0))
+#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PB8) | P_FUNCT(1))
+#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PB9) | P_FUNCT(1))
+#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PB10) | P_FUNCT(1))
+#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PB11) | P_FUNCT(1))
+
+#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PC0) | P_FUNCT(0))
+#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(0))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PC2) | P_FUNCT(0))
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PC3) | P_FUNCT(0))
+#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PC4) | P_FUNCT(0))
+#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(0))
+#define P_SPORT0_DRPRI (P_DEFINED | P_IDENT(GPIO_PC6) | P_FUNCT(0))
+#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PC7) | P_FUNCT(0))
+#define P_SD_D0 (P_DEFINED | P_IDENT(GPIO_PC8) | P_FUNCT(0))
+#define P_SD_D1 (P_DEFINED | P_IDENT(GPIO_PC9) | P_FUNCT(0))
+#define P_SD_D2 (P_DEFINED | P_IDENT(GPIO_PC10) | P_FUNCT(0))
+#define P_SD_D3 (P_DEFINED | P_IDENT(GPIO_PC11) | P_FUNCT(0))
+#define P_SD_CLK (P_DEFINED | P_IDENT(GPIO_PC12) | P_FUNCT(0))
+#define P_SD_CMD (P_DEFINED | P_IDENT(GPIO_PC13) | P_FUNCT(0))
+#define P_MMCLK (P_DEFINED | P_IDENT(GPIO_PC1) | P_FUNCT(1))
+#define P_MBCLK (P_DEFINED | P_IDENT(GPIO_PC5) | P_FUNCT(1))
+
+#define P_PPI1_D0 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(0))
+#define P_PPI1_D1 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(0))
+#define P_PPI1_D2 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(0))
+#define P_PPI1_D3 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(0))
+#define P_PPI1_D4 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(0))
+#define P_PPI1_D5 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(0))
+#define P_PPI1_D6 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(0))
+#define P_PPI1_D7 (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(0))
+#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(0))
+#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(0))
+#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(0))
+#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(0))
+#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(0))
+#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(0))
+#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(0))
+#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(0))
+
+#define P_HOST_D8 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(1))
+#define P_HOST_D9 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(1))
+#define P_HOST_D10 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(1))
+#define P_HOST_D11 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(1))
+#define P_HOST_D12 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(1))
+#define P_HOST_D13 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(1))
+#define P_HOST_D14 (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(1))
+#define P_HOST_D15 (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(1))
+#define P_HOST_D0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(1))
+#define P_HOST_D1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(1))
+#define P_HOST_D2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(1))
+#define P_HOST_D3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(1))
+#define P_HOST_D4 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(1))
+#define P_HOST_D5 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(1))
+#define P_HOST_D6 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(1))
+#define P_HOST_D7 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(1))
+#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(2))
+#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(2))
+#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(2))
+#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(2))
+#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(2))
+#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(2))
+#define P_SPORT1_DRPRI (P_DEFINED | P_IDENT(GPIO_PD6) | P_FUNCT(2))
+#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PD7) | P_FUNCT(2))
+#define P_PPI2_D0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(2))
+#define P_PPI2_D1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(2))
+#define P_PPI2_D2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(2))
+#define P_PPI2_D3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(2))
+#define P_PPI2_D4 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(2))
+#define P_PPI2_D5 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(2))
+#define P_PPI2_D6 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(2))
+#define P_PPI2_D7 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(2))
+#define P_PPI0_D18 (P_DEFINED | P_IDENT(GPIO_PD0) | P_FUNCT(3))
+#define P_PPI0_D19 (P_DEFINED | P_IDENT(GPIO_PD1) | P_FUNCT(3))
+#define P_PPI0_D20 (P_DEFINED | P_IDENT(GPIO_PD2) | P_FUNCT(3))
+#define P_PPI0_D21 (P_DEFINED | P_IDENT(GPIO_PD3) | P_FUNCT(3))
+#define P_PPI0_D22 (P_DEFINED | P_IDENT(GPIO_PD4) | P_FUNCT(3))
+#define P_PPI0_D23 (P_DEFINED | P_IDENT(GPIO_PD5) | P_FUNCT(3))
+#define P_KEY_ROW0 (P_DEFINED | P_IDENT(GPIO_PD8) | P_FUNCT(3))
+#define P_KEY_ROW1 (P_DEFINED | P_IDENT(GPIO_PD9) | P_FUNCT(3))
+#define P_KEY_ROW2 (P_DEFINED | P_IDENT(GPIO_PD10) | P_FUNCT(3))
+#define P_KEY_ROW3 (P_DEFINED | P_IDENT(GPIO_PD11) | P_FUNCT(3))
+#define P_KEY_COL0 (P_DEFINED | P_IDENT(GPIO_PD12) | P_FUNCT(3))
+#define P_KEY_COL1 (P_DEFINED | P_IDENT(GPIO_PD13) | P_FUNCT(3))
+#define P_KEY_COL2 (P_DEFINED | P_IDENT(GPIO_PD14) | P_FUNCT(3))
+#define P_KEY_COL3 (P_DEFINED | P_IDENT(GPIO_PD15) | P_FUNCT(3))
+
+#define P_SPI0_SCK (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(0))
+#define P_SPI0_MISO (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(0))
+#define P_SPI0_MOSI (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(0))
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(0))
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(0))
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(0))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(0))
+#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(0))
+#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PE8) | P_FUNCT(0))
+#define P_UART1_RTS (P_DEFINED | P_IDENT(GPIO_PE9) | P_FUNCT(0))
+#define P_UART1_CTS (P_DEFINED | P_IDENT(GPIO_PE10) | P_FUNCT(0))
+#define P_PPI1_CLK (P_DEFINED | P_IDENT(GPIO_PE11) | P_FUNCT(0))
+#define P_PPI1_FS1 (P_DEFINED | P_IDENT(GPIO_PE12) | P_FUNCT(0))
+#define P_PPI1_FS2 (P_DEFINED | P_IDENT(GPIO_PE13) | P_FUNCT(0))
+#define P_TWI0_SCL (P_DEFINED | P_IDENT(GPIO_PE14) | P_FUNCT(0))
+#define P_TWI0_SDA (P_DEFINED | P_IDENT(GPIO_PE15) | P_FUNCT(0))
+#define P_KEY_COL7 (P_DEFINED | P_IDENT(GPIO_PE0) | P_FUNCT(1))
+#define P_KEY_ROW6 (P_DEFINED | P_IDENT(GPIO_PE1) | P_FUNCT(1))
+#define P_KEY_COL6 (P_DEFINED | P_IDENT(GPIO_PE2) | P_FUNCT(1))
+#define P_KEY_ROW5 (P_DEFINED | P_IDENT(GPIO_PE3) | P_FUNCT(1))
+#define P_KEY_COL5 (P_DEFINED | P_IDENT(GPIO_PE4) | P_FUNCT(1))
+#define P_KEY_ROW4 (P_DEFINED | P_IDENT(GPIO_PE5) | P_FUNCT(1))
+#define P_KEY_COL4 (P_DEFINED | P_IDENT(GPIO_PE6) | P_FUNCT(1))
+#define P_KEY_ROW7 (P_DEFINED | P_IDENT(GPIO_PE7) | P_FUNCT(1))
+
+#define P_PPI0_D0 (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(0))
+#define P_PPI0_D1 (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(0))
+#define P_PPI0_D2 (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(0))
+#define P_PPI0_D3 (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(0))
+#define P_PPI0_D4 (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(0))
+#define P_PPI0_D5 (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(0))
+#define P_PPI0_D6 (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(0))
+#define P_PPI0_D7 (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(0))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(0))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(0))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(0))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(0))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(0))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(0))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(0))
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(0))
+#define P_ATAPI_D0A (P_DEFINED | P_IDENT(GPIO_PF0) | P_FUNCT(1))
+#define P_ATAPI_D1A (P_DEFINED | P_IDENT(GPIO_PF1) | P_FUNCT(1))
+#define P_ATAPI_D2A (P_DEFINED | P_IDENT(GPIO_PF2) | P_FUNCT(1))
+#define P_ATAPI_D3A (P_DEFINED | P_IDENT(GPIO_PF3) | P_FUNCT(1))
+#define P_ATAPI_D4A (P_DEFINED | P_IDENT(GPIO_PF4) | P_FUNCT(1))
+#define P_ATAPI_D5A (P_DEFINED | P_IDENT(GPIO_PF5) | P_FUNCT(1))
+#define P_ATAPI_D6A (P_DEFINED | P_IDENT(GPIO_PF6) | P_FUNCT(1))
+#define P_ATAPI_D7A (P_DEFINED | P_IDENT(GPIO_PF7) | P_FUNCT(1))
+#define P_ATAPI_D8A (P_DEFINED | P_IDENT(GPIO_PF8) | P_FUNCT(1))
+#define P_ATAPI_D9A (P_DEFINED | P_IDENT(GPIO_PF9) | P_FUNCT(1))
+#define P_ATAPI_D10A (P_DEFINED | P_IDENT(GPIO_PF10) | P_FUNCT(1))
+#define P_ATAPI_D11A (P_DEFINED | P_IDENT(GPIO_PF11) | P_FUNCT(1))
+#define P_ATAPI_D12A (P_DEFINED | P_IDENT(GPIO_PF12) | P_FUNCT(1))
+#define P_ATAPI_D13A (P_DEFINED | P_IDENT(GPIO_PF13) | P_FUNCT(1))
+#define P_ATAPI_D14A (P_DEFINED | P_IDENT(GPIO_PF14) | P_FUNCT(1))
+#define P_ATAPI_D15A (P_DEFINED | P_IDENT(GPIO_PF15) | P_FUNCT(1))
+
+#define P_PPI0_CLK (P_DEFINED | P_IDENT(GPIO_PG0) | P_FUNCT(0))
+#define P_PPI0_FS1 (P_DEFINED | P_IDENT(GPIO_PG1) | P_FUNCT(0))
+#define P_PPI0_FS2 (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(0))
+#define P_PPI0_D16 (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(0))
+#define P_PPI0_D17 (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(0))
+#define P_SPI1_SSEL1 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(0))
+#define P_SPI1_SSEL2 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(0))
+#define P_SPI1_SSEL3 (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(0))
+#define P_SPI1_SCK (P_DEFINED | P_IDENT(GPIO_PG8) | P_FUNCT(0))
+#define P_SPI1_MISO (P_DEFINED | P_IDENT(GPIO_PG9) | P_FUNCT(0))
+#define P_SPI1_MOSI (P_DEFINED | P_IDENT(GPIO_PG10) | P_FUNCT(0))
+#define P_SPI1_SS (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(0))
+#define P_CAN0_TX (P_DEFINED | P_IDENT(GPIO_PG12) | P_FUNCT(0))
+#define P_CAN0_RX (P_DEFINED | P_IDENT(GPIO_PG13) | P_FUNCT(0))
+#define P_CAN1_TX (P_DEFINED | P_IDENT(GPIO_PG14) | P_FUNCT(0))
+#define P_CAN1_RX (P_DEFINED | P_IDENT(GPIO_PG15) | P_FUNCT(0))
+#define P_ATAPI_A0A (P_DEFINED | P_IDENT(GPIO_PG2) | P_FUNCT(1))
+#define P_ATAPI_A1A (P_DEFINED | P_IDENT(GPIO_PG3) | P_FUNCT(1))
+#define P_ATAPI_A2A (P_DEFINED | P_IDENT(GPIO_PG4) | P_FUNCT(1))
+#define P_HOST_CE (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(1))
+#define P_HOST_RD (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(1))
+#define P_HOST_WR (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(1))
+#define P_MTXONB (P_DEFINED | P_IDENT(GPIO_PG11) | P_FUNCT(1))
+#define P_PPI2_FS2 (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(2))
+#define P_PPI2_FS1 (P_DEFINED | P_IDENT(GPIO_PG6) | P_FUNCT(2))
+#define P_PPI2_CLK (P_DEFINED | P_IDENT(GPIO_PG7) | P_FUNCT(2))
+#define P_CNT_CZM (P_DEFINED | P_IDENT(GPIO_PG5) | P_FUNCT(3))
+
+#define P_UART1_TX (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(0))
+#define P_UART1_RX (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(0))
+#define P_ATAPI_RESET (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(0))
+#define P_HOST_ADDR (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(0))
+#define P_HOST_ACK (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(0))
+#define P_MTX (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(0))
+#define P_MRX (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(0))
+#define P_MRXONB (P_DEFINED | P_IDENT(GPIO_PH7) | P_FUNCT(0))
+#define P_A4 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH8) | P_FUNCT(0))
+#define P_A5 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH9) | P_FUNCT(0))
+#define P_A6 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH10) | P_FUNCT(0))
+#define P_A7 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH11) | P_FUNCT(0))
+#define P_A8 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH12) | P_FUNCT(0))
+#define P_A9 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PH13) | P_FUNCT(0))
+#define P_PPI1_FS3 (P_DEFINED | P_IDENT(GPIO_PH0) | P_FUNCT(1))
+#define P_PPI2_FS3 (P_DEFINED | P_IDENT(GPIO_PH1) | P_FUNCT(1))
+#define P_TMR8 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(1))
+#define P_TMR9 (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(1))
+#define P_TMR10 (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(1))
+#define P_DMAR0 (P_DEFINED | P_IDENT(GPIO_PH5) | P_FUNCT(1))
+#define P_DMAR1 (P_DEFINED | P_IDENT(GPIO_PH6) | P_FUNCT(1))
+#define P_PPI0_FS3 (P_DEFINED | P_IDENT(GPIO_PH2) | P_FUNCT(2))
+#define P_CNT_CDG (P_DEFINED | P_IDENT(GPIO_PH3) | P_FUNCT(2))
+#define P_CNT_CUD (P_DEFINED | P_IDENT(GPIO_PH4) | P_FUNCT(2))
+
+#define P_A10 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI0) | P_FUNCT(0))
+#define P_A11 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI1) | P_FUNCT(0))
+#define P_A12 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI2) | P_FUNCT(0))
+#define P_A13 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI3) | P_FUNCT(0))
+#define P_A14 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI4) | P_FUNCT(0))
+#define P_A15 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI5) | P_FUNCT(0))
+#define P_A16 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI6) | P_FUNCT(0))
+#define P_A17 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI7) | P_FUNCT(0))
+#define P_A18 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI8) | P_FUNCT(0))
+#define P_A19 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI9) | P_FUNCT(0))
+#define P_A20 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI10) | P_FUNCT(0))
+#define P_A21 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI11) | P_FUNCT(0))
+#define P_A22 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI12) | P_FUNCT(0))
+#define P_A23 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI13) | P_FUNCT(0))
+#define P_A24 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI14) | P_FUNCT(0))
+#define P_A25 (P_MAYSHARE | P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(0))
+#define P_NOR_CLK (P_DEFINED | P_IDENT(GPIO_PI15) | P_FUNCT(1))
+
+#define P_AMC_ARDY_NOR_WAIT (P_DEFINED | P_IDENT(GPIO_PJ0) | P_FUNCT(0))
+#define P_NAND_CE (P_DEFINED | P_IDENT(GPIO_PJ1) | P_FUNCT(0))
+#define P_NAND_RB (P_DEFINED | P_IDENT(GPIO_PJ2) | P_FUNCT(0))
+#define P_ATAPI_DIOR (P_DEFINED | P_IDENT(GPIO_PJ3) | P_FUNCT(0))
+#define P_ATAPI_DIOW (P_DEFINED | P_IDENT(GPIO_PJ4) | P_FUNCT(0))
+#define P_ATAPI_CS0 (P_DEFINED | P_IDENT(GPIO_PJ5) | P_FUNCT(0))
+#define P_ATAPI_CS1 (P_DEFINED | P_IDENT(GPIO_PJ6) | P_FUNCT(0))
+#define P_ATAPI_DMACK (P_DEFINED | P_IDENT(GPIO_PJ7) | P_FUNCT(0))
+#define P_ATAPI_DMARQ (P_DEFINED | P_IDENT(GPIO_PJ8) | P_FUNCT(0))
+#define P_ATAPI_INTRQ (P_DEFINED | P_IDENT(GPIO_PJ9) | P_FUNCT(0))
+#define P_ATAPI_IORDY (P_DEFINED | P_IDENT(GPIO_PJ10) | P_FUNCT(0))
+#define P_AMC_BR (P_DEFINED | P_IDENT(GPIO_PJ11) | P_FUNCT(0))
+#define P_AMC_BG (P_DEFINED | P_IDENT(GPIO_PJ12) | P_FUNCT(0))
+#define P_AMC_BGH (P_DEFINED | P_IDENT(GPIO_PJ13) | P_FUNCT(0))
+
+#endif /* _MACH_PORTMUX_H_ */
/* Writing to VR_CTL initiates a PLL relock sequence. */
static __inline__ void bfin_write_VR_CTL(unsigned int val)
{
- unsigned long flags, iwr;
+ unsigned long flags, iwr0, iwr1;
/* Enable the PLL Wakeup bit in SIC IWR */
- iwr = bfin_read32(SICA_IWR0);
+ iwr0 = bfin_read32(SICA_IWR0);
+ iwr1 = bfin_read32(SICA_IWR1);
/* Only allow PPL Wakeup) */
bfin_write32(SICA_IWR0, IWR_ENABLE(0));
+ bfin_write32(SICA_IWR1, 0);
bfin_write16(VR_CTL, val);
__builtin_bfin_ssync();
local_irq_save(flags);
asm("IDLE;");
local_irq_restore(flags);
- bfin_write32(SICA_IWR0, iwr);
+ bfin_write32(SICA_IWR0, iwr0);
+ bfin_write32(SICA_IWR1, iwr1);
}
#define bfin_read_PLL_STAT() bfin_read16(PLL_STAT)
#define bfin_write_PLL_STAT(val) bfin_write16(PLL_STAT,val)
#define CH_IMEM_STREAM1_SRC 34
#define CH_IMEM_STREAM1_DEST 35
+extern int channel2irq(unsigned int channel);
+extern struct dma_register *base_addr[];
+
#endif
--- /dev/null
+#ifndef _MACH_PORTMUX_H_
+#define _MACH_PORTMUX_H_
+
+#define P_PPI0_CLK (P_DONTCARE)
+#define P_PPI0_FS1 (P_DONTCARE)
+#define P_PPI0_FS2 (P_DONTCARE)
+#define P_PPI0_FS3 (P_DONTCARE)
+#define P_PPI0_D15 (P_DEFINED | P_IDENT(GPIO_PF47))
+#define P_PPI0_D14 (P_DEFINED | P_IDENT(GPIO_PF46))
+#define P_PPI0_D13 (P_DEFINED | P_IDENT(GPIO_PF45))
+#define P_PPI0_D12 (P_DEFINED | P_IDENT(GPIO_PF44))
+#define P_PPI0_D11 (P_DEFINED | P_IDENT(GPIO_PF43))
+#define P_PPI0_D10 (P_DEFINED | P_IDENT(GPIO_PF42))
+#define P_PPI0_D9 (P_DEFINED | P_IDENT(GPIO_PF41))
+#define P_PPI0_D8 (P_DEFINED | P_IDENT(GPIO_PF40))
+#define P_PPI0_D0 (P_DONTCARE)
+#define P_PPI0_D1 (P_DONTCARE)
+#define P_PPI0_D2 (P_DONTCARE)
+#define P_PPI0_D3 (P_DONTCARE)
+#define P_PPI0_D4 (P_DONTCARE)
+#define P_PPI0_D5 (P_DONTCARE)
+#define P_PPI0_D6 (P_DONTCARE)
+#define P_PPI0_D7 (P_DONTCARE)
+#define P_PPI1_CLK (P_DONTCARE)
+#define P_PPI1_FS1 (P_DONTCARE)
+#define P_PPI1_FS2 (P_DONTCARE)
+#define P_PPI1_FS3 (P_DONTCARE)
+#define P_PPI1_D15 (P_DEFINED | P_IDENT(GPIO_PF39))
+#define P_PPI1_D14 (P_DEFINED | P_IDENT(GPIO_PF38))
+#define P_PPI1_D13 (P_DEFINED | P_IDENT(GPIO_PF37))
+#define P_PPI1_D12 (P_DEFINED | P_IDENT(GPIO_PF36))
+#define P_PPI1_D11 (P_DEFINED | P_IDENT(GPIO_PF35))
+#define P_PPI1_D10 (P_DEFINED | P_IDENT(GPIO_PF34))
+#define P_PPI1_D9 (P_DEFINED | P_IDENT(GPIO_PF33))
+#define P_PPI1_D8 (P_DEFINED | P_IDENT(GPIO_PF32))
+#define P_PPI1_D0 (P_DONTCARE)
+#define P_PPI1_D1 (P_DONTCARE)
+#define P_PPI1_D2 (P_DONTCARE)
+#define P_PPI1_D3 (P_DONTCARE)
+#define P_PPI1_D4 (P_DONTCARE)
+#define P_PPI1_D5 (P_DONTCARE)
+#define P_PPI1_D6 (P_DONTCARE)
+#define P_PPI1_D7 (P_DONTCARE)
+#define P_SPORT1_TSCLK (P_DEFINED | P_IDENT(GPIO_PF31))
+#define P_SPORT1_RSCLK (P_DEFINED | P_IDENT(GPIO_PF30))
+#define P_SPORT0_TSCLK (P_DEFINED | P_IDENT(GPIO_PF29))
+#define P_SPORT0_RSCLK (P_DEFINED | P_IDENT(GPIO_PF28))
+#define P_UART0_RX (P_DEFINED | P_IDENT(GPIO_PF27))
+#define P_UART0_TX (P_DEFINED | P_IDENT(GPIO_PF26))
+#define P_SPORT1_DRSEC (P_DEFINED | P_IDENT(GPIO_PF25))
+#define P_SPORT1_RFS (P_DEFINED | P_IDENT(GPIO_PF24))
+#define P_SPORT1_DTPRI (P_DEFINED | P_IDENT(GPIO_PF23))
+#define P_SPORT1_DTSEC (P_DEFINED | P_IDENT(GPIO_PF22))
+#define P_SPORT1_TFS (P_DEFINED | P_IDENT(GPIO_PF21))
+#define P_SPORT1_DRPRI (P_DONTCARE)
+#define P_SPORT0_DRSEC (P_DEFINED | P_IDENT(GPIO_PF20))
+#define P_SPORT0_RFS (P_DEFINED | P_IDENT(GPIO_PF19))
+#define P_SPORT0_DTPRI (P_DEFINED | P_IDENT(GPIO_PF18))
+#define P_SPORT0_DTSEC (P_DEFINED | P_IDENT(GPIO_PF17))
+#define P_SPORT0_TFS (P_DEFINED | P_IDENT(GPIO_PF16))
+#define P_SPORT0_DRPRI (P_DONTCARE)
+#define P_TMRCLK (P_DEFINED | P_IDENT(GPIO_PF15))
+#define P_SPI0_SSEL7 (P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_SPI0_SSEL6 (P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_SPI0_SSEL5 (P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_SPI0_SSEL4 (P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_SPI0_SSEL3 (P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_SPI0_SSEL2 (P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_SPI0_SSEL1 (P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_SPI0_SS (P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_TMR11 (P_DONTCARE)
+#define P_TMR10 (P_DONTCARE)
+#define P_TMR9 (P_DONTCARE)
+#define P_TMR8 (P_DONTCARE)
+#define P_TMR7 (P_DEFINED | P_IDENT(GPIO_PF7))
+#define P_TMR6 (P_DEFINED | P_IDENT(GPIO_PF6))
+#define P_TMR5 (P_DEFINED | P_IDENT(GPIO_PF5))
+#define P_TMR4 (P_DEFINED | P_IDENT(GPIO_PF4))
+#define P_TMR3 (P_DEFINED | P_IDENT(GPIO_PF3))
+#define P_TMR2 (P_DEFINED | P_IDENT(GPIO_PF2))
+#define P_TMR1 (P_DEFINED | P_IDENT(GPIO_PF1))
+#define P_TMR0 (P_DEFINED | P_IDENT(GPIO_PF0))
+#define P_SPI0_MOSI (P_DONTCARE)
+#define P_SPI0_MIS0 (P_DONTCARE)
+#define P_SPI0_SCK (P_DONTCARE)
+
+#endif /* _MACH_PORTMUX_H_ */
#define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val)
#define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL)
#ifdef ANOMALY_05000125
-static __inline__ void bfin_write_DMEM_CONTROL(unsigned int val)
-{
- unsigned long flags, iwr;
-
- local_irq_save(flags);
- __asm__(".align 8\n");
- bfin_write32(IMEM_CONTROL, val);
- __builtin_bfin_ssync();
- local_irq_restore(flags);
-}
+extern void bfin_write_DMEM_CONTROL(unsigned int val);
#else
#define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val)
#endif
*/
#define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL)
#ifdef ANOMALY_05000125
-static __inline__ void bfin_write_IMEM_CONTROL(unsigned int val)
-{
- unsigned long flags, iwr;
-
- local_irq_save(flags);
- __asm__(".align 8\n");
- bfin_write32(IMEM_CONTROL, val);
- __builtin_bfin_ssync();
- local_irq_restore(flags);
-
-}
+extern void bfin_write_IMEM_CONTROL(unsigned int val);
#else
#define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val)
#endif
#define MAP_NORESERVE 0x4000 /* don't check for reservations */
#define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */
#define MAP_NONBLOCK 0x10000 /* do not block on IO */
-#define MAP_UNINITIALIZE 0x4000000 /* For anonymous mmap, memory could
- be uninitialized. */
#define MS_ASYNC 1 /* sync memory asynchronously */
#define MS_INVALIDATE 2 /* invalidate the caches */
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT 12
+#ifdef __ASSEMBLY__
+#define PAGE_SIZE (1 << PAGE_SHIFT)
+#else
#define PAGE_SIZE (1UL << PAGE_SHIFT)
+#endif
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifdef __KERNEL__
--- /dev/null
+/*
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _PORTMUX_H_
+#define _PORTMUX_H_
+
+#define P_IDENT(x) ((x) & 0x1FF)
+#define P_FUNCT(x) (((x) & 0x3) << 9)
+#define P_FUNCT2MUX(x) (((x) >> 9) & 0x3)
+#define P_DEFINED 0x8000
+#define P_UNDEF 0x4000
+#define P_MAYSHARE 0x2000
+#define P_DONTCARE 0x1000
+
+#include <asm/gpio.h>
+#include <asm/mach/portmux.h>
+
+#ifndef P_SPORT2_TFS
+#define P_SPORT2_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DTSEC
+#define P_SPORT2_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DTPRI
+#define P_SPORT2_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT2_TSCLK
+#define P_SPORT2_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT2_RFS
+#define P_SPORT2_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DRSEC
+#define P_SPORT2_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT2_DRPRI
+#define P_SPORT2_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT2_RSCLK
+#define P_SPORT2_RSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT3_TFS
+#define P_SPORT3_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DTSEC
+#define P_SPORT3_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DTPRI
+#define P_SPORT3_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT3_TSCLK
+#define P_SPORT3_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT3_RFS
+#define P_SPORT3_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DRSEC
+#define P_SPORT3_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT3_DRPRI
+#define P_SPORT3_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT3_RSCLK
+#define P_SPORT3_RSCLK P_UNDEF
+#endif
+
+#ifndef P_TMR4
+#define P_TMR4 P_UNDEF
+#endif
+
+#ifndef P_TMR5
+#define P_TMR5 P_UNDEF
+#endif
+
+#ifndef P_TMR6
+#define P_TMR6 P_UNDEF
+#endif
+
+#ifndef P_TMR7
+#define P_TMR7 P_UNDEF
+#endif
+
+#ifndef P_TWI1_SCL
+#define P_TWI1_SCL P_UNDEF
+#endif
+
+#ifndef P_TWI1_SDA
+#define P_TWI1_SDA P_UNDEF
+#endif
+
+#ifndef P_UART3_RTS
+#define P_UART3_RTS P_UNDEF
+#endif
+
+#ifndef P_UART3_CTS
+#define P_UART3_CTS P_UNDEF
+#endif
+
+#ifndef P_UART2_TX
+#define P_UART2_TX P_UNDEF
+#endif
+
+#ifndef P_UART2_RX
+#define P_UART2_RX P_UNDEF
+#endif
+
+#ifndef P_UART3_TX
+#define P_UART3_TX P_UNDEF
+#endif
+
+#ifndef P_UART3_RX
+#define P_UART3_RX P_UNDEF
+#endif
+
+#ifndef P_SPI2_SS
+#define P_SPI2_SS P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL1
+#define P_SPI2_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL2
+#define P_SPI2_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SSEL3
+#define P_SPI2_SSEL3 P_UNDEF
+#endif
+
+#ifndef P_SPI2_SCK
+#define P_SPI2_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI2_MOSI
+#define P_SPI2_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI2_MISO
+#define P_SPI2_MISO P_UNDEF
+#endif
+
+#ifndef P_TMR0
+#define P_TMR0 P_UNDEF
+#endif
+
+#ifndef P_TMR1
+#define P_TMR1 P_UNDEF
+#endif
+
+#ifndef P_TMR2
+#define P_TMR2 P_UNDEF
+#endif
+
+#ifndef P_TMR3
+#define P_TMR3 P_UNDEF
+#endif
+
+#ifndef P_SPORT0_TFS
+#define P_SPORT0_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DTSEC
+#define P_SPORT0_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DTPRI
+#define P_SPORT0_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT0_TSCLK
+#define P_SPORT0_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT0_RFS
+#define P_SPORT0_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DRSEC
+#define P_SPORT0_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT0_DRPRI
+#define P_SPORT0_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT0_RSCLK
+#define P_SPORT0_RSCLK P_UNDEF
+#endif
+
+#ifndef P_SD_D0
+#define P_SD_D0 P_UNDEF
+#endif
+
+#ifndef P_SD_D1
+#define P_SD_D1 P_UNDEF
+#endif
+
+#ifndef P_SD_D2
+#define P_SD_D2 P_UNDEF
+#endif
+
+#ifndef P_SD_D3
+#define P_SD_D3 P_UNDEF
+#endif
+
+#ifndef P_SD_CLK
+#define P_SD_CLK P_UNDEF
+#endif
+
+#ifndef P_SD_CMD
+#define P_SD_CMD P_UNDEF
+#endif
+
+#ifndef P_MMCLK
+#define P_MMCLK P_UNDEF
+#endif
+
+#ifndef P_MBCLK
+#define P_MBCLK P_UNDEF
+#endif
+
+#ifndef P_PPI1_D0
+#define P_PPI1_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D1
+#define P_PPI1_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D2
+#define P_PPI1_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D3
+#define P_PPI1_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D4
+#define P_PPI1_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D5
+#define P_PPI1_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D6
+#define P_PPI1_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D7
+#define P_PPI1_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D8
+#define P_PPI1_D8 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D9
+#define P_PPI1_D9 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D10
+#define P_PPI1_D10 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D11
+#define P_PPI1_D11 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D12
+#define P_PPI1_D12 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D13
+#define P_PPI1_D13 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D14
+#define P_PPI1_D14 P_UNDEF
+#endif
+
+#ifndef P_PPI1_D15
+#define P_PPI1_D15 P_UNDEF
+#endif
+
+#ifndef P_HOST_D8
+#define P_HOST_D8 P_UNDEF
+#endif
+
+#ifndef P_HOST_D9
+#define P_HOST_D9 P_UNDEF
+#endif
+
+#ifndef P_HOST_D10
+#define P_HOST_D10 P_UNDEF
+#endif
+
+#ifndef P_HOST_D11
+#define P_HOST_D11 P_UNDEF
+#endif
+
+#ifndef P_HOST_D12
+#define P_HOST_D12 P_UNDEF
+#endif
+
+#ifndef P_HOST_D13
+#define P_HOST_D13 P_UNDEF
+#endif
+
+#ifndef P_HOST_D14
+#define P_HOST_D14 P_UNDEF
+#endif
+
+#ifndef P_HOST_D15
+#define P_HOST_D15 P_UNDEF
+#endif
+
+#ifndef P_HOST_D0
+#define P_HOST_D0 P_UNDEF
+#endif
+
+#ifndef P_HOST_D1
+#define P_HOST_D1 P_UNDEF
+#endif
+
+#ifndef P_HOST_D2
+#define P_HOST_D2 P_UNDEF
+#endif
+
+#ifndef P_HOST_D3
+#define P_HOST_D3 P_UNDEF
+#endif
+
+#ifndef P_HOST_D4
+#define P_HOST_D4 P_UNDEF
+#endif
+
+#ifndef P_HOST_D5
+#define P_HOST_D5 P_UNDEF
+#endif
+
+#ifndef P_HOST_D6
+#define P_HOST_D6 P_UNDEF
+#endif
+
+#ifndef P_HOST_D7
+#define P_HOST_D7 P_UNDEF
+#endif
+
+#ifndef P_SPORT1_TFS
+#define P_SPORT1_TFS P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DTSEC
+#define P_SPORT1_DTSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DTPRI
+#define P_SPORT1_DTPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT1_TSCLK
+#define P_SPORT1_TSCLK P_UNDEF
+#endif
+
+#ifndef P_SPORT1_RFS
+#define P_SPORT1_RFS P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DRSEC
+#define P_SPORT1_DRSEC P_UNDEF
+#endif
+
+#ifndef P_SPORT1_DRPRI
+#define P_SPORT1_DRPRI P_UNDEF
+#endif
+
+#ifndef P_SPORT1_RSCLK
+#define P_SPORT1_RSCLK P_UNDEF
+#endif
+
+#ifndef P_PPI2_D0
+#define P_PPI2_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D1
+#define P_PPI2_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D2
+#define P_PPI2_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D3
+#define P_PPI2_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D4
+#define P_PPI2_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D5
+#define P_PPI2_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D6
+#define P_PPI2_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI2_D7
+#define P_PPI2_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D18
+#define P_PPI0_D18 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D19
+#define P_PPI0_D19 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D20
+#define P_PPI0_D20 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D21
+#define P_PPI0_D21 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D22
+#define P_PPI0_D22 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D23
+#define P_PPI0_D23 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW0
+#define P_KEY_ROW0 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW1
+#define P_KEY_ROW1 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW2
+#define P_KEY_ROW2 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW3
+#define P_KEY_ROW3 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL0
+#define P_KEY_COL0 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL1
+#define P_KEY_COL1 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL2
+#define P_KEY_COL2 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL3
+#define P_KEY_COL3 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SCK
+#define P_SPI0_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI0_MISO
+#define P_SPI0_MISO P_UNDEF
+#endif
+
+#ifndef P_SPI0_MOSI
+#define P_SPI0_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI0_SS
+#define P_SPI0_SS P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL1
+#define P_SPI0_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL2
+#define P_SPI0_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI0_SSEL3
+#define P_SPI0_SSEL3 P_UNDEF
+#endif
+
+#ifndef P_UART0_TX
+#define P_UART0_TX P_UNDEF
+#endif
+
+#ifndef P_UART0_RX
+#define P_UART0_RX P_UNDEF
+#endif
+
+#ifndef P_UART1_RTS
+#define P_UART1_RTS P_UNDEF
+#endif
+
+#ifndef P_UART1_CTS
+#define P_UART1_CTS P_UNDEF
+#endif
+
+#ifndef P_PPI1_CLK
+#define P_PPI1_CLK P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS1
+#define P_PPI1_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS2
+#define P_PPI1_FS2 P_UNDEF
+#endif
+
+#ifndef P_TWI0_SCL
+#define P_TWI0_SCL P_UNDEF
+#endif
+
+#ifndef P_TWI0_SDA
+#define P_TWI0_SDA P_UNDEF
+#endif
+
+#ifndef P_KEY_COL7
+#define P_KEY_COL7 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW6
+#define P_KEY_ROW6 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL6
+#define P_KEY_COL6 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW5
+#define P_KEY_ROW5 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL5
+#define P_KEY_COL5 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW4
+#define P_KEY_ROW4 P_UNDEF
+#endif
+
+#ifndef P_KEY_COL4
+#define P_KEY_COL4 P_UNDEF
+#endif
+
+#ifndef P_KEY_ROW7
+#define P_KEY_ROW7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D0
+#define P_PPI0_D0 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D1
+#define P_PPI0_D1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D2
+#define P_PPI0_D2 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D3
+#define P_PPI0_D3 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D4
+#define P_PPI0_D4 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D5
+#define P_PPI0_D5 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D6
+#define P_PPI0_D6 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D7
+#define P_PPI0_D7 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D8
+#define P_PPI0_D8 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D9
+#define P_PPI0_D9 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D10
+#define P_PPI0_D10 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D11
+#define P_PPI0_D11 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D12
+#define P_PPI0_D12 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D13
+#define P_PPI0_D13 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D14
+#define P_PPI0_D14 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D15
+#define P_PPI0_D15 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D0A
+#define P_ATAPI_D0A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D1A
+#define P_ATAPI_D1A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D2A
+#define P_ATAPI_D2A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D3A
+#define P_ATAPI_D3A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D4A
+#define P_ATAPI_D4A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D5A
+#define P_ATAPI_D5A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D6A
+#define P_ATAPI_D6A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D7A
+#define P_ATAPI_D7A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D8A
+#define P_ATAPI_D8A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D9A
+#define P_ATAPI_D9A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D10A
+#define P_ATAPI_D10A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D11A
+#define P_ATAPI_D11A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D12A
+#define P_ATAPI_D12A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D13A
+#define P_ATAPI_D13A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D14A
+#define P_ATAPI_D14A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_D15A
+#define P_ATAPI_D15A P_UNDEF
+#endif
+
+#ifndef P_PPI0_CLK
+#define P_PPI0_CLK P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS1
+#define P_PPI0_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS2
+#define P_PPI0_FS2 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D16
+#define P_PPI0_D16 P_UNDEF
+#endif
+
+#ifndef P_PPI0_D17
+#define P_PPI0_D17 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL1
+#define P_SPI1_SSEL1 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL2
+#define P_SPI1_SSEL2 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SSEL3
+#define P_SPI1_SSEL3 P_UNDEF
+#endif
+
+#ifndef P_SPI1_SCK
+#define P_SPI1_SCK P_UNDEF
+#endif
+
+#ifndef P_SPI1_MISO
+#define P_SPI1_MISO P_UNDEF
+#endif
+
+#ifndef P_SPI1_MOSI
+#define P_SPI1_MOSI P_UNDEF
+#endif
+
+#ifndef P_SPI1_SS
+#define P_SPI1_SS P_UNDEF
+#endif
+
+#ifndef P_CAN0_TX
+#define P_CAN0_TX P_UNDEF
+#endif
+
+#ifndef P_CAN0_RX
+#define P_CAN0_RX P_UNDEF
+#endif
+
+#ifndef P_CAN1_TX
+#define P_CAN1_TX P_UNDEF
+#endif
+
+#ifndef P_CAN1_RX
+#define P_CAN1_RX P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A0A
+#define P_ATAPI_A0A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A1A
+#define P_ATAPI_A1A P_UNDEF
+#endif
+
+#ifndef P_ATAPI_A2A
+#define P_ATAPI_A2A P_UNDEF
+#endif
+
+#ifndef P_HOST_CE
+#define P_HOST_CE P_UNDEF
+#endif
+
+#ifndef P_HOST_RD
+#define P_HOST_RD P_UNDEF
+#endif
+
+#ifndef P_HOST_WR
+#define P_HOST_WR P_UNDEF
+#endif
+
+#ifndef P_MTXONB
+#define P_MTXONB P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS2
+#define P_PPI2_FS2 P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS1
+#define P_PPI2_FS1 P_UNDEF
+#endif
+
+#ifndef P_PPI2_CLK
+#define P_PPI2_CLK P_UNDEF
+#endif
+
+#ifndef P_CNT_CZM
+#define P_CNT_CZM P_UNDEF
+#endif
+
+#ifndef P_UART1_TX
+#define P_UART1_TX P_UNDEF
+#endif
+
+#ifndef P_UART1_RX
+#define P_UART1_RX P_UNDEF
+#endif
+
+#ifndef P_ATAPI_RESET
+#define P_ATAPI_RESET P_UNDEF
+#endif
+
+#ifndef P_HOST_ADDR
+#define P_HOST_ADDR P_UNDEF
+#endif
+
+#ifndef P_HOST_ACK
+#define P_HOST_ACK P_UNDEF
+#endif
+
+#ifndef P_MTX
+#define P_MTX P_UNDEF
+#endif
+
+#ifndef P_MRX
+#define P_MRX P_UNDEF
+#endif
+
+#ifndef P_MRXONB
+#define P_MRXONB P_UNDEF
+#endif
+
+#ifndef P_A4
+#define P_A4 P_UNDEF
+#endif
+
+#ifndef P_A5
+#define P_A5 P_UNDEF
+#endif
+
+#ifndef P_A6
+#define P_A6 P_UNDEF
+#endif
+
+#ifndef P_A7
+#define P_A7 P_UNDEF
+#endif
+
+#ifndef P_A8
+#define P_A8 P_UNDEF
+#endif
+
+#ifndef P_A9
+#define P_A9 P_UNDEF
+#endif
+
+#ifndef P_PPI1_FS3
+#define P_PPI1_FS3 P_UNDEF
+#endif
+
+#ifndef P_PPI2_FS3
+#define P_PPI2_FS3 P_UNDEF
+#endif
+
+#ifndef P_TMR8
+#define P_TMR8 P_UNDEF
+#endif
+
+#ifndef P_TMR9
+#define P_TMR9 P_UNDEF
+#endif
+
+#ifndef P_TMR10
+#define P_TMR10 P_UNDEF
+#endif
+#ifndef P_TMR11
+#define P_TMR11 P_UNDEF
+#endif
+
+#ifndef P_DMAR0
+#define P_DMAR0 P_UNDEF
+#endif
+
+#ifndef P_DMAR1
+#define P_DMAR1 P_UNDEF
+#endif
+
+#ifndef P_PPI0_FS3
+#define P_PPI0_FS3 P_UNDEF
+#endif
+
+#ifndef P_CNT_CDG
+#define P_CNT_CDG P_UNDEF
+#endif
+
+#ifndef P_CNT_CUD
+#define P_CNT_CUD P_UNDEF
+#endif
+
+#ifndef P_A10
+#define P_A10 P_UNDEF
+#endif
+
+#ifndef P_A11
+#define P_A11 P_UNDEF
+#endif
+
+#ifndef P_A12
+#define P_A12 P_UNDEF
+#endif
+
+#ifndef P_A13
+#define P_A13 P_UNDEF
+#endif
+
+#ifndef P_A14
+#define P_A14 P_UNDEF
+#endif
+
+#ifndef P_A15
+#define P_A15 P_UNDEF
+#endif
+
+#ifndef P_A16
+#define P_A16 P_UNDEF
+#endif
+
+#ifndef P_A17
+#define P_A17 P_UNDEF
+#endif
+
+#ifndef P_A18
+#define P_A18 P_UNDEF
+#endif
+
+#ifndef P_A19
+#define P_A19 P_UNDEF
+#endif
+
+#ifndef P_A20
+#define P_A20 P_UNDEF
+#endif
+
+#ifndef P_A21
+#define P_A21 P_UNDEF
+#endif
+
+#ifndef P_A22
+#define P_A22 P_UNDEF
+#endif
+
+#ifndef P_A23
+#define P_A23 P_UNDEF
+#endif
+
+#ifndef P_A24
+#define P_A24 P_UNDEF
+#endif
+
+#ifndef P_A25
+#define P_A25 P_UNDEF
+#endif
+
+#ifndef P_NOR_CLK
+#define P_NOR_CLK P_UNDEF
+#endif
+
+#ifndef P_TMRCLK
+#define P_TMRCLK P_UNDEF
+#endif
+
+#ifndef P_AMC_ARDY_NOR_WAIT
+#define P_AMC_ARDY_NOR_WAIT P_UNDEF
+#endif
+
+#ifndef P_NAND_CE
+#define P_NAND_CE P_UNDEF
+#endif
+
+#ifndef P_NAND_RB
+#define P_NAND_RB P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DIOR
+#define P_ATAPI_DIOR P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DIOW
+#define P_ATAPI_DIOW P_UNDEF
+#endif
+
+#ifndef P_ATAPI_CS0
+#define P_ATAPI_CS0 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_CS1
+#define P_ATAPI_CS1 P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DMACK
+#define P_ATAPI_DMACK P_UNDEF
+#endif
+
+#ifndef P_ATAPI_DMARQ
+#define P_ATAPI_DMARQ P_UNDEF
+#endif
+
+#ifndef P_ATAPI_INTRQ
+#define P_ATAPI_INTRQ P_UNDEF
+#endif
+
+#ifndef P_ATAPI_IORDY
+#define P_ATAPI_IORDY P_UNDEF
+#endif
+
+#ifndef P_AMC_BR
+#define P_AMC_BR P_UNDEF
+#endif
+
+#ifndef P_AMC_BG
+#define P_AMC_BG P_UNDEF
+#endif
+
+#ifndef P_AMC_BGH
+#define P_AMC_BGH P_UNDEF
+#endif
+
+/* EMAC */
+
+#ifndef P_MII0_ETxD0
+#define P_MII0_ETxD0 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD1
+#define P_MII0_ETxD1 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD2
+#define P_MII0_ETxD2 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxD3
+#define P_MII0_ETxD3 P_UNDEF
+#endif
+
+#ifndef P_MII0_ETxEN
+#define P_MII0_ETxEN P_UNDEF
+#endif
+
+#ifndef P_MII0_TxCLK
+#define P_MII0_TxCLK P_UNDEF
+#endif
+
+#ifndef P_MII0_PHYINT
+#define P_MII0_PHYINT P_UNDEF
+#endif
+
+#ifndef P_MII0_COL
+#define P_MII0_COL P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD0
+#define P_MII0_ERxD0 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD1
+#define P_MII0_ERxD1 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD2
+#define P_MII0_ERxD2 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxD3
+#define P_MII0_ERxD3 P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxDV
+#define P_MII0_ERxDV P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxCLK
+#define P_MII0_ERxCLK P_UNDEF
+#endif
+
+#ifndef P_MII0_ERxER
+#define P_MII0_ERxER P_UNDEF
+#endif
+
+#ifndef P_MII0_CRS
+#define P_MII0_CRS P_UNDEF
+#endif
+
+#ifndef P_RMII0_REF_CLK
+#define P_RMII0_REF_CLK P_UNDEF
+#endif
+
+#ifndef P_RMII0_MDINT
+#define P_RMII0_MDINT P_UNDEF
+#endif
+
+#ifndef P_RMII0_CRS_DV
+#define P_RMII0_CRS_DV P_UNDEF
+#endif
+
+#ifndef P_MDC
+#define P_MDC P_UNDEF
+#endif
+
+#ifndef P_MDIO
+#define P_MDIO P_UNDEF
+#endif
+
+#endif /* _PORTMUX_H_ */
--- /dev/null
+/*
+ * Common header file for blackfin family of processors.
+ *
+ */
+
+#ifndef _BLACKFIN_TRACE_
+#define _BLACKFIN_TRACE_
+
+#ifndef __ASSEMBLY__
+/* Trace Macros for C files */
+
+#define trace_buffer_save(x) \
+ do { \
+ (x) = bfin_read_TBUFCTL(); \
+ bfin_write_TBUFCTL((x) & ~TBUFEN); \
+ } while (0)
+
+#define trace_buffer_restore(x) \
+ do { \
+ bfin_write_TBUFCTL((x)); \
+ } while (0)
+
+#else
+/* Trace Macros for Assembly files */
+
+#define TRACE_BUFFER_START(preg, dreg) trace_buffer_start(preg, dreg)
+#define TRACE_BUFFER_STOP(preg, dreg) trace_buffer_stop(preg, dreg)
+
+#define trace_buffer_stop(preg, dreg) \
+ preg.L = LO(TBUFCTL); \
+ preg.H = HI(TBUFCTL); \
+ dreg = 0x1; \
+ [preg] = dreg;
+
+#define trace_buffer_start(preg, dreg) \
+ preg.L = LO(TBUFCTL); \
+ preg.H = HI(TBUFCTL); \
+ dreg = 0x13; \
+ [preg] = dreg;
+
+#ifdef CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE
+# define DEBUG_START_HWTRACE(preg, dreg) trace_buffer_start(preg, dreg)
+# define DEBUG_STOP_HWTRACE(preg, dreg) trace_buffer_stop(preg, dreg)
+
+#else
+# define DEBUG_START_HWTRACE(preg, dreg)
+# define DEBUG_STOP_HWTRACE(preg, dreg)
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _BLACKFIN_TRACE_ */
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-
-static inline dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
-{
- return ((dma64_addr_t) page_to_phys(page) +
- (dma64_addr_t) offset);
-}
-
-static inline struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return pfn_to_page(dma_addr >> PAGE_SHIFT);
-}
-
-static inline unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
-}
-
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#define pcibios_assign_all_busses() 0
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
extern void pcibios_set_master(struct pci_dev *dev);
extern void pcibios_penalize_isa_irq(int irq);
extern void pci_free_consistent(struct pci_dev *hwdev, size_t size,
void *vaddr, dma_addr_t dma_handle);
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-
/* Return the index of the PCI controller for device PDEV. */
#define pci_controller_num(PDEV) (0)
#define PCI_DMA_BUS_IS_PHYS (1)
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* _ASM_H8300_PCI_H */
-#ifndef _LINUX_BOOT_H
-#define _LINUX_BOOT_H
+#ifndef _ASM_BOOT_H
+#define _ASM_BOOT_H
/* Don't touch these, unless you really know what you're doing. */
#define DEF_INITSEG 0x9000
+ (CONFIG_PHYSICAL_ALIGN - 1)) \
& ~(CONFIG_PHYSICAL_ALIGN - 1))
-#endif /* _LINUX_BOOT_H */
+#endif /* _ASM_BOOT_H */
--- /dev/null
+#ifndef _ASM_BOOTPARAM_H
+#define _ASM_BOOTPARAM_H
+
+#include <linux/types.h>
+#include <linux/screen_info.h>
+#include <linux/apm_bios.h>
+#include <asm/e820.h>
+#include <linux/edd.h>
+#include <video/edid.h>
+
+struct setup_header {
+ u8 setup_sects;
+ u16 root_flags;
+ u32 syssize;
+ u16 ram_size;
+ u16 vid_mode;
+ u16 root_dev;
+ u16 boot_flag;
+ u16 jump;
+ u32 header;
+ u16 version;
+ u32 realmode_swtch;
+ u16 start_sys;
+ u16 kernel_version;
+ u8 type_of_loader;
+ u8 loadflags;
+#define LOADED_HIGH 0x01
+#define CAN_USE_HEAP 0x80
+ u16 setup_move_size;
+ u32 code32_start;
+ u32 ramdisk_image;
+ u32 ramdisk_size;
+ u32 bootsect_kludge;
+ u16 heap_end_ptr;
+ u16 _pad1;
+ u32 cmd_line_ptr;
+ u32 initrd_addr_max;
+ u32 kernel_alignment;
+ u8 relocatable_kernel;
+} __attribute__((packed));
+
+struct sys_desc_table {
+ u16 length;
+ u8 table[14];
+};
+
+struct efi_info {
+ u32 _pad1;
+ u32 efi_systab;
+ u32 efi_memdesc_size;
+ u32 efi_memdec_version;
+ u32 efi_memmap;
+ u32 fi_memmap_size;
+ u32 _pad2[2];
+};
+
+/* The so-called "zeropage" */
+struct boot_params {
+ struct screen_info screen_info; /* 0x000 */
+ struct apm_bios_info apm_bios_info; /* 0x040 */
+ u8 _pad2[12]; /* 0x054 */
+ u32 speedstep_info[4]; /* 0x060 */
+ u8 _pad3[16]; /* 0x070 */
+ u8 hd0_info[16]; /* obsolete! */ /* 0x080 */
+ u8 hd1_info[16]; /* obsolete! */ /* 0x090 */
+ struct sys_desc_table sys_desc_table; /* 0x0a0 */
+ u8 _pad4[144]; /* 0x0b0 */
+ struct edid_info edid_info; /* 0x140 */
+ struct efi_info efi_info; /* 0x1c0 */
+ u32 alt_mem_k; /* 0x1e0 */
+ u32 scratch; /* Scratch field! */ /* 0x1e4 */
+ u8 e820_entries; /* 0x1e8 */
+ u8 eddbuf_entries; /* 0x1e9 */
+ u8 edd_mbr_sig_buf_entries; /* 0x1ea */
+ u8 _pad6[6]; /* 0x1eb */
+ struct setup_header hdr; /* setup header */ /* 0x1f1 */
+ u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)];
+ u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */
+ struct e820entry e820_map[E820MAX]; /* 0x2d0 */
+ u8 _pad8[48]; /* 0xcd0 */
+ struct edd_info eddbuf[EDDMAXNR]; /* 0xd00 */
+ u8 _pad9[276]; /* 0xeec */
+} __attribute__((packed));
+
+#endif /* _ASM_BOOTPARAM_H */
#endif
#include <asm/required-features.h>
-#define NCAPINTS 7 /* N 32-bit words worth of info */
+#define NCAPINTS 8 /* N 32-bit words worth of info */
/* Intel-defined CPU features, CPUID level 0x00000001 (edx), word 0 */
#define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */
#define X86_FEATURE_BTS (3*32+13) /* Branch Trace Store */
#define X86_FEATURE_LAPIC_TIMER_BROKEN (3*32+ 14) /* lapic timer broken in C1 */
#define X86_FEATURE_SYNC_RDTSC (3*32+15) /* RDTSC synchronizes the CPU */
+#define X86_FEATURE_REP_GOOD (3*32+16) /* rep microcode works well on this CPU */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
#define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */
#define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */
-#define cpu_has(c, bit) \
- ((__builtin_constant_p(bit) && (bit) < 32 && \
- (1UL << (bit)) & REQUIRED_MASK1) ? \
- 1 : \
- test_bit(bit, (c)->x86_capability))
+/*
+ * Auxiliary flags: Linux defined - For features scattered in various
+ * CPUID levels like 0x6, 0xA etc
+ */
+#define X86_FEATURE_IDA (7*32+ 0) /* Intel Dynamic Acceleration */
+
+#define cpu_has(c, bit) \
+ (__builtin_constant_p(bit) && \
+ ( (((bit)>>5)==0 && (1UL<<((bit)&31) & REQUIRED_MASK0)) || \
+ (((bit)>>5)==1 && (1UL<<((bit)&31) & REQUIRED_MASK1)) || \
+ (((bit)>>5)==2 && (1UL<<((bit)&31) & REQUIRED_MASK2)) || \
+ (((bit)>>5)==3 && (1UL<<((bit)&31) & REQUIRED_MASK3)) || \
+ (((bit)>>5)==4 && (1UL<<((bit)&31) & REQUIRED_MASK4)) || \
+ (((bit)>>5)==5 && (1UL<<((bit)&31) & REQUIRED_MASK5)) || \
+ (((bit)>>5)==6 && (1UL<<((bit)&31) & REQUIRED_MASK6)) || \
+ (((bit)>>5)==7 && (1UL<<((bit)&31) & REQUIRED_MASK7)) ) \
+ ? 1 : \
+ test_bit(bit, (c)->x86_capability))
#define boot_cpu_has(bit) cpu_has(&boot_cpu_data, bit)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
#ifndef __ASSEMBLY__
+struct e820entry {
+ u64 addr; /* start of memory segment */
+ u64 size; /* size of memory segment */
+ u32 type; /* type of memory segment */
+} __attribute__((packed));
+
struct e820map {
- int nr_map;
- struct e820entry {
- unsigned long long addr; /* start of memory segment */
- unsigned long long size; /* size of memory segment */
- unsigned long type; /* type of memory segment */
- } map[E820MAX];
+ u32 nr_map;
+ struct e820entry map[E820MAX];
};
extern struct e820map e820;
#define pci_unmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-
-static inline dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
-{
- return ((dma64_addr_t) page_to_phys(page) +
- (dma64_addr_t) offset);
-}
-
-static inline struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return pfn_to_page(dma_addr >> PAGE_SHIFT);
-}
-
-static inline unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
- flush_write_buffers();
-}
-
#define HAVE_PCI_MMAP
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
extern void identify_boot_cpu(void);
extern void identify_secondary_cpu(struct cpuinfo_x86 *);
extern void print_cpu_info(struct cpuinfo_x86 *);
+extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
extern unsigned short num_cache_leaves;
/* Define minimum CPUID feature set for kernel These bits are checked
really early to actually display a visible error message before the
- kernel dies. Only add word 0 bits here
+ kernel dies. Make sure to assign features to the proper mask!
Some requirements that are not in CPUID yet are also in the
- CONFIG_X86_MINIMUM_CPU mode which is checked too.
+ CONFIG_X86_MINIMUM_CPU_FAMILY which is checked too.
The real information is in arch/i386/Kconfig.cpu, this just converts
the CONFIGs into a bitmask */
+#ifndef CONFIG_MATH_EMULATION
+# define NEED_FPU (1<<(X86_FEATURE_FPU & 31))
+#else
+# define NEED_FPU 0
+#endif
+
#ifdef CONFIG_X86_PAE
-#define NEED_PAE (1<<X86_FEATURE_PAE)
+# define NEED_PAE (1<<(X86_FEATURE_PAE & 31))
#else
-#define NEED_PAE 0
+# define NEED_PAE 0
#endif
#ifdef CONFIG_X86_CMOV
-#define NEED_CMOV (1<<X86_FEATURE_CMOV)
+# define NEED_CMOV (1<<(X86_FEATURE_CMOV & 31))
#else
-#define NEED_CMOV 0
+# define NEED_CMOV 0
#endif
#ifdef CONFIG_X86_CMPXCHG64
-#define NEED_CMPXCHG64 (1<<X86_FEATURE_CX8)
+# define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31))
+#else
+# define NEED_CX8 0
+#endif
+
+#define REQUIRED_MASK0 (NEED_FPU|NEED_PAE|NEED_CMOV|NEED_CX8)
+
+#ifdef CONFIG_X86_USE_3DNOW
+# define NEED_3DNOW (1<<(X86_FEATURE_3DNOW & 31))
#else
-#define NEED_CMPXCHG64 0
+# define NEED_3DNOW 0
#endif
-#define REQUIRED_MASK1 (NEED_PAE|NEED_CMOV|NEED_CMPXCHG64)
+#define REQUIRED_MASK1 (NEED_3DNOW)
+
+#define REQUIRED_MASK2 0
+#define REQUIRED_MASK3 0
+#define REQUIRED_MASK4 0
+#define REQUIRED_MASK5 0
+#define REQUIRED_MASK6 0
+#define REQUIRED_MASK7 0
#endif
#define NEW_CL_POINTER 0x228 /* Relative to real mode data */
#ifndef __ASSEMBLY__
+
+#include <asm/bootparam.h>
+
/*
* This is set up by the setup-routine at boot-time
*/
-extern unsigned char boot_params[PARAM_SIZE];
+extern struct boot_params boot_params;
-#define PARAM (boot_params)
+#define PARAM ((char *)&boot_params)
#define SCREEN_INFO (*(struct screen_info *) (PARAM+0))
#define EXT_MEM_K (*(unsigned short *) (PARAM+2))
#define ALT_MEM_K (*(unsigned long *) (PARAM+0x1e0))
#define E820_MAP ((struct e820entry *) (PARAM+E820MAP))
#define APM_BIOS_INFO (*(struct apm_bios_info *) (PARAM+0x40))
#define IST_INFO (*(struct ist_info *) (PARAM+0x60))
-#define DRIVE_INFO (*(struct drive_info_struct *) (PARAM+0x80))
-#define SYS_DESC_TABLE (*(struct sys_desc_table_struct*)(PARAM+0xa0))
+#define SYS_DESC_TABLE (*(struct sys_desc_table *)(PARAM+0xa0))
#define EFI_SYSTAB ((efi_system_table_t *) *((unsigned long *)(PARAM+0x1c4)))
#define EFI_MEMDESC_SIZE (*((unsigned long *) (PARAM+0x1c8)))
#define EFI_MEMDESC_VERSION (*((unsigned long *) (PARAM+0x1cc)))
IA64_MCA_RENDEZ_CHECKIN_NOTDONE = 0x0,
IA64_MCA_RENDEZ_CHECKIN_DONE = 0x1,
IA64_MCA_RENDEZ_CHECKIN_INIT = 0x2,
+ IA64_MCA_RENDEZ_CHECKIN_CONCURRENT_MCA = 0x3,
};
/* Information maintained by the MC infrastructure */
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) \
(((PTR)->LEN_NAME) = (VAL))
-/* The ia64 platform always supports 64-bit addressing. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-#define pci_dac_page_to_dma(dev,pg,off,dir) ((dma_addr_t) page_to_bus(pg) + (off))
-#define pci_dac_dma_to_page(dev,dma_addr) (virt_to_page(bus_to_virt(dma_addr)))
-#define pci_dac_dma_to_offset(dev,dma_addr) offset_in_page(dma_addr)
-#define pci_dac_dma_sync_single_for_cpu(dev,dma_addr,len,dir) do { } while (0)
-#define pci_dac_dma_sync_single_for_device(dev,dma_addr,len,dir) do { mb(); } while (0)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
return (pci_domain_nr(bus) != 0);
}
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
extern void pcibios_resource_to_bus(struct pci_dev *dev,
struct pci_bus_region *region, struct resource *res);
#define SN_SAL_NO_FAULT_ZONE_VIRTUAL 0x02000010
#define SN_SAL_NO_FAULT_ZONE_PHYSICAL 0x02000011
#define SN_SAL_PRINT_ERROR 0x02000012
+#define SN_SAL_REGISTER_PMI_HANDLER 0x02000014
#define SN_SAL_SET_ERROR_HANDLING_FEATURES 0x0200001a // reentrant
#define SN_SAL_GET_FIT_COMPT 0x0200001b // reentrant
#define SN_SAL_GET_SAPIC_INFO 0x0200001d
return ret_stuff.status;
}
+/*
+ * Register or unregister a function to handle a PMI received by a CPU.
+ * Before calling the registered handler, SAL sets r1 to the value that
+ * was passed in as the global_pointer.
+ *
+ * If the handler pointer is NULL, then the currently registered handler
+ * will be unregistered.
+ *
+ * Returns 0 on success, or a negative value if an error occurred.
+ */
+static inline int
+sn_register_pmi_handler(u64 handler, u64 global_pointer)
+{
+ struct ia64_sal_retval ret_stuff;
+ ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler,
+ global_pointer, 0, 0, 0, 0, 0);
+ return ret_stuff.status;
+}
+
/*
* Change or query the coherence domain for this partition. Each cpu-based
* nasid is represented by a bit in an array of 64-bit words:
*/
#define PCI_DMA_BUS_IS_PHYS (1)
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* _ASM_M68K_PCI_H */
return 1;
}
-/*
- * Not supporting more than 32-bit PCI bus addresses now, but
- * must satisfy references to this function. Change if needed.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* CONFIG_COMEMPCI */
#endif /* M68KNOMMU_PCI_H */
*/
if (__IS_LOW512(phys_addr) && __IS_LOW512(last_addr) &&
flags == _CACHE_UNCACHED)
- return (void __iomem *)CKSEG1ADDR(phys_addr);
+ return (void __iomem *)
+ (unsigned long)CKSEG1ADDR(phys_addr);
}
return __ioremap(offset, size, flags);
#define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */
#endif
-#ifdef CONFIG_MIPS_MT_SMTC
+#ifdef CONFIG_MIPS_MT_SMTC_IM_BACKSTOP
/*
* Clear interrupt mask handling "backstop" if irq_hwmask
* entry so indicates. This implies that the ack() or end()
*/
#define __read_64bit_c0_split(source, sel) \
({ \
- unsigned long long val; \
- unsigned long flags; \
+ unsigned long long __val; \
+ unsigned long __flags; \
\
- local_irq_save(flags); \
+ local_irq_save(__flags); \
if (sel == 0) \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dsrl\t%M0, %M0, 32\n\t" \
"dsrl\t%L0, %L0, 32\n\t" \
".set\tmips0" \
- : "=r" (val)); \
+ : "=r" (__val)); \
else \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dsrl\t%M0, %M0, 32\n\t" \
"dsrl\t%L0, %L0, 32\n\t" \
".set\tmips0" \
- : "=r" (val)); \
- local_irq_restore(flags); \
+ : "=r" (__val)); \
+ local_irq_restore(__flags); \
\
- val; \
+ __val; \
})
#define __write_64bit_c0_split(source, sel, val) \
do { \
- unsigned long flags; \
+ unsigned long __flags; \
\
- local_irq_save(flags); \
+ local_irq_save(__flags); \
if (sel == 0) \
__asm__ __volatile__( \
".set\tmips64\n\t" \
"dmtc0\t%L0, " #source ", " #sel "\n\t" \
".set\tmips0" \
: : "r" (val)); \
- local_irq_restore(flags); \
+ local_irq_restore(__flags); \
} while (0)
#define read_c0_index() __read_32bit_c0_register($0, 0)
#endif /* CONFIG_DMA_NEED_PCI_MAP_STATE */
-/* This is always fine. */
-#define pci_dac_dma_supported(pci_dev, mask) (1)
-
-extern dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev,
- struct page *page, unsigned long offset, int direction);
-extern struct page *pci_dac_dma_to_page(struct pci_dev *pdev,
- dma64_addr_t dma_addr);
-extern unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev,
- dma64_addr_t dma_addr);
-extern void pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev,
- dma64_addr_t dma_addr, size_t len, int direction);
-extern void pci_dac_dma_sync_single_for_device(struct pci_dev *pdev,
- dma64_addr_t dma_addr, size_t len, int direction);
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
/* implement the pci_ DMA API in terms of the generic device dma_ one */
#include <asm-generic/pci-dma-compat.h>
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
/* Do platform specific device initialization at pci_enable_device() time */
extern int pcibios_plat_dev_init(struct pci_dev *dev);
+++ /dev/null
-/*
- * include/asm-mips/rtc.h
- *
- * (Really an interface for drivers/char/genrtc.c)
- *
- * Copyright (C) 2004 MontaVista Software Inc.
- * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- * Please read the COPYING file for all license details.
- */
-
-#ifndef _MIPS_RTC_H
-#define _MIPS_RTC_H
-
-#ifdef __KERNEL__
-
-#include <linux/rtc.h>
-#include <asm/time.h>
-
-#define RTC_PIE 0x40 /* periodic interrupt enable */
-#define RTC_AIE 0x20 /* alarm interrupt enable */
-#define RTC_UIE 0x10 /* update-finished interrupt enable */
-
-/* some dummy definitions */
-#define RTC_BATT_BAD 0x100 /* battery bad */
-#define RTC_SQWE 0x08 /* enable square-wave output */
-#define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
-#define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
-#define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
-
-static inline unsigned int get_rtc_time(struct rtc_time *time)
-{
- unsigned long nowtime;
-
- nowtime = rtc_mips_get_time();
- to_tm(nowtime, time);
- time->tm_year -= 1900;
-
- return RTC_24H;
-}
-
-static inline int set_rtc_time(struct rtc_time *time)
-{
- unsigned long nowtime;
- int ret;
-
- nowtime = mktime(time->tm_year+1900, time->tm_mon+1,
- time->tm_mday, time->tm_hour, time->tm_min,
- time->tm_sec);
- ret = rtc_mips_set_time(nowtime);
-
- return ret;
-}
-
-static inline unsigned int get_rtc_ss(void)
-{
- struct rtc_time h;
-
- get_rtc_time(&h);
- return h.tm_sec;
-}
-
-static inline int get_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-
-static inline int set_rtc_pll(struct rtc_pll_info *pll)
-{
- return -EINVAL;
-}
-#endif
-#endif
/*
* TLB debugging functions:
*/
-extern void dump_tlb(int first, int last);
extern void dump_tlb_all(void);
-extern void dump_tlb_wired(void);
-extern void dump_tlb_addr(unsigned long addr);
-extern void dump_tlb_nonwired(void);
#endif /* __ASM_TLBDEBUG_H */
#ifndef __NEC_VR41XX_GIU_H
#define __NEC_VR41XX_GIU_H
+/*
+ * NEC VR4100 series GIU platform device IDs.
+ */
+enum {
+ GPIO_50PINS_PULLUPDOWN,
+ GPIO_36PINS,
+ GPIO_48PINS_EDGE_SELECT,
+};
+
typedef enum {
IRQ_TRIGGER_LEVEL,
IRQ_TRIGGER_EDGE,
#ifndef __NEC_VR41XX_SIU_H
#define __NEC_VR41XX_SIU_H
+#define SIU_PORTS_MAX 2
+
typedef enum {
SIU_INTERFACE_RS232C,
SIU_INTERFACE_IRDA,
#define PCIBIOS_MIN_IO 0x10
#define PCIBIOS_MIN_MEM 0x1000 /* NBPG - but pci/setup-res.c dies */
-/* Don't support DAC yet. */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* export the pci_ DMA API in terms of the dma_ one */
#include <asm-generic/pci-dma-compat.h>
return root;
}
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
static inline void pcibios_penalize_isa_irq(int irq, int active)
{
/* We don't need to penalize isa irq's */
void (*unmap_sg)(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction);
int (*dma_supported)(struct device *dev, u64 mask);
- int (*dac_dma_supported)(struct device *dev, u64 mask);
int (*set_dma_mask)(struct device *dev, u64 dma_mask);
};
extern void set_pci_dma_ops(struct dma_mapping_ops *dma_ops);
extern struct dma_mapping_ops *get_pci_dma_ops(void);
-/* For DAC DMA, we currently don't support it by default, but
- * we let 64-bit platforms override this.
- */
-static inline int pci_dac_dma_supported(struct pci_dev *hwdev,u64 mask)
-{
- struct dma_mapping_ops *d = get_pci_dma_ops();
-
- if (d && d->dac_dma_supported)
- return d->dac_dma_supported(&hwdev->dev, mask);
- return 0;
-}
-
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
unsigned long *strategy_parameter)
}
#endif
-/*
- * At present there are very few 32-bit PPC machines that can have
- * memory above the 4GB point, and we don't support that.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* Return the index of the PCI controller for device PDEV. */
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
extern int pci_read_irq_line(struct pci_dev *dev);
-extern void pcibios_add_platform_entries(struct pci_dev *dev);
-
struct file;
extern pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long pfn,
}
#endif
-/*
- * At present there are very few 32-bit PPC machines that can have
- * memory above the 4GB point, and we don't support that.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* Return the index of the PCI controller for device PDEV. */
#define pci_domain_nr(bus) ((struct pci_controller *)(bus)->sysdata)->index
return root;
}
-extern void pcibios_add_platform_entries(struct pci_dev *dev);
-
struct file;
extern pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long pfn,
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif
-/* Not supporting more than 32-bit PCI bus addresses now, but
- * must satisfy references to this function. Change if needed.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
int pciauto_assign_resources(int busno, struct pci_channel *hose);
#endif
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* generic pci stuff */
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
#endif
-/* Not supporting more than 32-bit PCI bus addresses now, but
- * must satisfy references to this function. Change if needed.
- */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* These macros should be used after a pci_map_sg call has been done
* to get bus addresses of each of the SG entries and their lengths.
* You should only work with the number of sg entries pci_map_sg
extern int pciauto_assign_resources(int busno, struct pci_channel *hose);
#endif
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* generic pci stuff */
return 1;
}
-#define pci_dac_dma_supported(dev, mask) (0)
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
}
#endif
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0)
static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
#define PCI64_REQUIRED_MASK (~(dma64_addr_t)0)
#define PCI64_ADDR_BASE 0xfffc000000000000UL
-/* Usage of the pci_dac_foo interfaces is only valid if this
- * test passes.
- */
-#define pci_dac_dma_supported(pci_dev, mask) \
- ((((mask) & PCI64_REQUIRED_MASK) == PCI64_REQUIRED_MASK) ? 1 : 0)
-
-static inline dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
-{
- return (PCI64_ADDR_BASE +
- __pa(page_address(page)) + offset);
-}
-
-static inline struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- unsigned long paddr = (dma_addr & PAGE_MASK) - PCI64_ADDR_BASE;
-
- return virt_to_page(__va(paddr));
-}
-
-static inline unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
- /* DAC cycle addressing does not make use of the
- * PCI controller's streaming cache, so nothing to do.
- */
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
- /* DAC cycle addressing does not make use of the
- * PCI controller's streaming cache, so nothing to do.
- */
-}
-
#define PCI_DMA_ERROR_CODE (~(dma_addr_t)0x0)
static inline int pci_dma_mapping_error(dma_addr_t dma_addr)
extern struct resource *pcibios_select_root(struct pci_dev *, struct resource *);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
{
return PCI_IRQ_NONE;
extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
extern void pci_iounmap (struct pci_dev *dev, void __iomem *addr);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __V850_PCI_H__ */
/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers
instead, perversely enough, this becomes always true! */
# define pci_dma_supported(dev, mask) 1
-# define pci_dac_dma_supported(dev, mask) 0
# define pcibios_assign_all_busses() 1
#endif /* CONFIG_RTE_MB_A_PCI */
#include <linux/types.h>
#include <linux/stddef.h>
+
+/*
+ * Alternative inline assembly for SMP.
+ *
+ * The LOCK_PREFIX macro defined here replaces the LOCK and
+ * LOCK_PREFIX macros used everywhere in the source tree.
+ *
+ * SMP alternatives use the same data structures as the other
+ * alternatives and the X86_FEATURE_UP flag to indicate the case of a
+ * UP system running a SMP kernel. The existing apply_alternatives()
+ * works fine for patching a SMP kernel for UP.
+ *
+ * The SMP alternative tables can be kept after boot and contain both
+ * UP and SMP versions of the instructions to allow switching back to
+ * SMP at runtime, when hotplugging in a new CPU, which is especially
+ * useful in virtualized environments.
+ *
+ * The very common lock prefix is handled as special case in a
+ * separate table which is a pure address list without replacement ptr
+ * and size information. That keeps the table sizes small.
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX \
+ ".section .smp_locks,\"a\"\n" \
+ " .align 8\n" \
+ " .quad 661f\n" /* address */ \
+ ".previous\n" \
+ "661:\n\tlock; "
+
+#else /* ! CONFIG_SMP */
+#define LOCK_PREFIX ""
+#endif
+
+/* This must be included *after* the definition of LOCK_PREFIX */
#include <asm/cpufeature.h>
struct alt_instr {
*/
#define ASM_OUTPUT2(a, b) a, b
-/*
- * Alternative inline assembly for SMP.
- *
- * The LOCK_PREFIX macro defined here replaces the LOCK and
- * LOCK_PREFIX macros used everywhere in the source tree.
- *
- * SMP alternatives use the same data structures as the other
- * alternatives and the X86_FEATURE_UP flag to indicate the case of a
- * UP system running a SMP kernel. The existing apply_alternatives()
- * works fine for patching a SMP kernel for UP.
- *
- * The SMP alternative tables can be kept after boot and contain both
- * UP and SMP versions of the instructions to allow switching back to
- * SMP at runtime, when hotplugging in a new CPU, which is especially
- * useful in virtualized environments.
- *
- * The very common lock prefix is handled as special case in a
- * separate table which is a pure address list without replacement ptr
- * and size information. That keeps the table sizes small.
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX \
- ".section .smp_locks,\"a\"\n" \
- " .align 8\n" \
- " .quad 661f\n" /* address */ \
- ".previous\n" \
- "661:\n\tlock; "
-
-#else /* ! CONFIG_SMP */
-#define LOCK_PREFIX ""
-#endif
-
struct paravirt_patch;
#ifdef CONFIG_PARAVIRT
void apply_paravirt(struct paravirt_patch *start, struct paravirt_patch *end);
-#ifndef _LINUX_BOOT_H
-#define _LINUX_BOOT_H
-
-/* Don't touch these, unless you really know what you're doing. */
-#define DEF_INITSEG 0x9000
-#define DEF_SYSSEG 0x1000
-#define DEF_SETUPSEG 0x9020
-#define DEF_SYSSIZE 0x7F00
-
-/* Internal svga startup constants */
-#define NORMAL_VGA 0xffff /* 80x25 mode */
-#define EXTENDED_VGA 0xfffe /* 80x50 mode */
-#define ASK_VGA 0xfffd /* ask for it at bootup */
-
-#endif
+#include <asm-i386/boot.h>
--- /dev/null
+#include <asm-i386/bootparam.h>
#ifndef __ASM_X8664_CPUFEATURE_H
#define __ASM_X8664_CPUFEATURE_H
-#define NCAPINTS 7 /* N 32-bit words worth of info */
+#include <asm-i386/cpufeature.h>
-/* Intel-defined CPU features, CPUID level 0x00000001, word 0 */
-#define X86_FEATURE_FPU (0*32+ 0) /* Onboard FPU */
-#define X86_FEATURE_VME (0*32+ 1) /* Virtual Mode Extensions */
-#define X86_FEATURE_DE (0*32+ 2) /* Debugging Extensions */
-#define X86_FEATURE_PSE (0*32+ 3) /* Page Size Extensions */
-#define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */
-#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers, RDMSR, WRMSR */
-#define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */
-#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */
-#define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */
-#define X86_FEATURE_APIC (0*32+ 9) /* Onboard APIC */
-#define X86_FEATURE_SEP (0*32+11) /* SYSENTER/SYSEXIT */
-#define X86_FEATURE_MTRR (0*32+12) /* Memory Type Range Registers */
-#define X86_FEATURE_PGE (0*32+13) /* Page Global Enable */
-#define X86_FEATURE_MCA (0*32+14) /* Machine Check Architecture */
-#define X86_FEATURE_CMOV (0*32+15) /* CMOV instruction (FCMOVCC and FCOMI too if FPU present) */
-#define X86_FEATURE_PAT (0*32+16) /* Page Attribute Table */
-#define X86_FEATURE_PSE36 (0*32+17) /* 36-bit PSEs */
-#define X86_FEATURE_PN (0*32+18) /* Processor serial number */
-#define X86_FEATURE_CLFLSH (0*32+19) /* Supports the CLFLUSH instruction */
-#define X86_FEATURE_DS (0*32+21) /* Debug Store */
-#define X86_FEATURE_ACPI (0*32+22) /* ACPI via MSR */
-#define X86_FEATURE_MMX (0*32+23) /* Multimedia Extensions */
-#define X86_FEATURE_FXSR (0*32+24) /* FXSAVE and FXRSTOR instructions (fast save and restore */
- /* of FPU context), and CR4.OSFXSR available */
-#define X86_FEATURE_XMM (0*32+25) /* Streaming SIMD Extensions */
-#define X86_FEATURE_XMM2 (0*32+26) /* Streaming SIMD Extensions-2 */
-#define X86_FEATURE_SELFSNOOP (0*32+27) /* CPU self snoop */
-#define X86_FEATURE_HT (0*32+28) /* Hyper-Threading */
-#define X86_FEATURE_ACC (0*32+29) /* Automatic clock control */
-#define X86_FEATURE_IA64 (0*32+30) /* IA-64 processor */
-
-/* AMD-defined CPU features, CPUID level 0x80000001, word 1 */
-/* Don't duplicate feature flags which are redundant with Intel! */
-#define X86_FEATURE_SYSCALL (1*32+11) /* SYSCALL/SYSRET */
-#define X86_FEATURE_MMXEXT (1*32+22) /* AMD MMX extensions */
-#define X86_FEATURE_FXSR_OPT (1*32+25) /* FXSR optimizations */
-#define X86_FEATURE_RDTSCP (1*32+27) /* RDTSCP */
-#define X86_FEATURE_LM (1*32+29) /* Long Mode (x86-64) */
-#define X86_FEATURE_3DNOWEXT (1*32+30) /* AMD 3DNow! extensions */
-#define X86_FEATURE_3DNOW (1*32+31) /* 3DNow! */
-
-/* Transmeta-defined CPU features, CPUID level 0x80860001, word 2 */
-#define X86_FEATURE_RECOVERY (2*32+ 0) /* CPU in recovery mode */
-#define X86_FEATURE_LONGRUN (2*32+ 1) /* Longrun power control */
-#define X86_FEATURE_LRTI (2*32+ 3) /* LongRun table interface */
-
-/* Other features, Linux-defined mapping, word 3 */
-/* This range is used for feature bits which conflict or are synthesized */
-#define X86_FEATURE_CXMMX (3*32+ 0) /* Cyrix MMX extensions */
-#define X86_FEATURE_K6_MTRR (3*32+ 1) /* AMD K6 nonstandard MTRRs */
-#define X86_FEATURE_CYRIX_ARR (3*32+ 2) /* Cyrix ARRs (= MTRRs) */
-#define X86_FEATURE_CENTAUR_MCR (3*32+ 3) /* Centaur MCRs (= MTRRs) */
-#define X86_FEATURE_REP_GOOD (3*32+ 4) /* rep microcode works well on this CPU */
-#define X86_FEATURE_CONSTANT_TSC (3*32+5) /* TSC runs at constant rate */
-#define X86_FEATURE_SYNC_RDTSC (3*32+6) /* RDTSC syncs CPU core */
-#define X86_FEATURE_FXSAVE_LEAK (3*32+7) /* FIP/FOP/FDP leaks through FXSAVE */
-#define X86_FEATURE_UP (3*32+8) /* SMP kernel running on UP */
-#define X86_FEATURE_ARCH_PERFMON (3*32+9) /* Intel Architectural PerfMon */
-#define X86_FEATURE_PEBS (3*32+10) /* Precise-Event Based Sampling */
-#define X86_FEATURE_BTS (3*32+11) /* Branch Trace Store */
-
-/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
-#define X86_FEATURE_XMM3 (4*32+ 0) /* Streaming SIMD Extensions-3 */
-#define X86_FEATURE_MWAIT (4*32+ 3) /* Monitor/Mwait support */
-#define X86_FEATURE_DSCPL (4*32+ 4) /* CPL Qualified Debug Store */
-#define X86_FEATURE_EST (4*32+ 7) /* Enhanced SpeedStep */
-#define X86_FEATURE_TM2 (4*32+ 8) /* Thermal Monitor 2 */
-#define X86_FEATURE_CID (4*32+10) /* Context ID */
-#define X86_FEATURE_CX16 (4*32+13) /* CMPXCHG16B */
-#define X86_FEATURE_XTPR (4*32+14) /* Send Task Priority Messages */
-
-/* VIA/Cyrix/Centaur-defined CPU features, CPUID level 0xC0000001, word 5 */
-#define X86_FEATURE_XSTORE (5*32+ 2) /* on-CPU RNG present (xstore insn) */
-#define X86_FEATURE_XSTORE_EN (5*32+ 3) /* on-CPU RNG enabled */
-#define X86_FEATURE_XCRYPT (5*32+ 6) /* on-CPU crypto (xcrypt insn) */
-#define X86_FEATURE_XCRYPT_EN (5*32+ 7) /* on-CPU crypto enabled */
-
-/* More extended AMD flags: CPUID level 0x80000001, ecx, word 6 */
-#define X86_FEATURE_LAHF_LM (6*32+ 0) /* LAHF/SAHF in long mode */
-#define X86_FEATURE_CMP_LEGACY (6*32+ 1) /* If yes HyperThreading not valid */
-
-#define cpu_has(c, bit) test_bit(bit, (c)->x86_capability)
-#define boot_cpu_has(bit) test_bit(bit, boot_cpu_data.x86_capability)
-
-#define cpu_has_fpu 1
+#undef cpu_has_vme
#define cpu_has_vme 0
-#define cpu_has_de 1
-#define cpu_has_pse 1
-#define cpu_has_tsc 1
+
+#undef cpu_has_pae
#define cpu_has_pae ___BUG___
-#define cpu_has_pge 1
-#define cpu_has_apic boot_cpu_has(X86_FEATURE_APIC)
-#define cpu_has_mtrr 1
-#define cpu_has_mmx 1
-#define cpu_has_fxsr 1
-#define cpu_has_xmm 1
-#define cpu_has_xmm2 1
-#define cpu_has_xmm3 boot_cpu_has(X86_FEATURE_XMM3)
-#define cpu_has_ht boot_cpu_has(X86_FEATURE_HT)
+
+#undef cpu_has_mp
#define cpu_has_mp 1 /* XXX */
+
+#undef cpu_has_k6_mtrr
#define cpu_has_k6_mtrr 0
+
+#undef cpu_has_cyrix_arr
#define cpu_has_cyrix_arr 0
+
+#undef cpu_has_centaur_mcr
#define cpu_has_centaur_mcr 0
-#define cpu_has_clflush boot_cpu_has(X86_FEATURE_CLFLSH)
-#define cpu_has_ds boot_cpu_has(X86_FEATURE_DS)
-#define cpu_has_pebs boot_cpu_has(X86_FEATURE_PEBS)
-#define cpu_has_bts boot_cpu_has(X86_FEATURE_BTS)
#endif /* __ASM_X8664_CPUFEATURE_H */
#ifndef __E820_HEADER
#define __E820_HEADER
-#include <linux/mmzone.h>
-
#define E820MAP 0x2d0 /* our map */
#define E820MAX 128 /* number of entries in E820MAP */
#define E820NR 0x1e8 /* # entries in E820MAP */
} __attribute__((packed));
struct e820map {
- int nr_map;
+ u32 nr_map;
struct e820entry map[E820MAX];
};
#if defined(CONFIG_IOMMU) || defined(CONFIG_CALGARY_IOMMU)
-/*
- * x86-64 always supports DAC, but sometimes it is useful to force
- * devices through the IOMMU to get automatic sg list merging.
- * Optional right now.
- */
-extern int iommu_sac_force;
-#define pci_dac_dma_supported(pci_dev, mask) (!iommu_sac_force)
-
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME) \
dma_addr_t ADDR_NAME;
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME) \
#else
/* No IOMMU */
-#define pci_dac_dma_supported(pci_dev, mask) 1
-
#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
#define pci_unmap_addr(PTR, ADDR_NAME) (0)
#include <asm-generic/pci-dma-compat.h>
-static inline dma64_addr_t
-pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, unsigned long offset, int direction)
-{
- return ((dma64_addr_t) page_to_phys(page) +
- (dma64_addr_t) offset);
-}
-
-static inline struct page *
-pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return virt_to_page(__va(dma_addr));
-}
-
-static inline unsigned long
-pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr)
-{
- return (dma_addr & ~PAGE_MASK);
-}
-
-static inline void
-pci_dac_dma_sync_single_for_cpu(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
-}
-
-static inline void
-pci_dac_dma_sync_single_for_device(struct pci_dev *pdev, dma64_addr_t dma_addr, size_t len, int direction)
-{
- flush_write_buffers();
-}
-
#ifdef CONFIG_PCI
static inline void pci_dma_burst_advice(struct pci_dev *pdev,
enum pci_dma_burst_strategy *strat,
extern int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* generic pci stuff */
extern void identify_cpu(struct cpuinfo_x86 *);
extern void print_cpu_info(struct cpuinfo_x86 *);
+extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
extern unsigned short num_cache_leaves;
asm volatile("cpuid" : "=a" (tmp) : "0" (1) : "ebx","ecx","edx","memory");
}
-#define cpu_has_fpu 1
-
#define ARCH_HAS_PREFETCH
static inline void prefetch(void *x)
{
--- /dev/null
+#ifndef _ASM_REQUIRED_FEATURES_H
+#define _ASM_REQUIRED_FEATURES_H 1
+
+/* Define minimum CPUID feature set for kernel These bits are checked
+ really early to actually display a visible error message before the
+ kernel dies. Make sure to assign features to the proper mask!
+
+ The real information is in arch/x86_64/Kconfig.cpu, this just converts
+ the CONFIGs into a bitmask */
+
+/* x86-64 baseline features */
+#define NEED_FPU (1<<(X86_FEATURE_FPU & 31))
+#define NEED_PSE (1<<(X86_FEATURE_PSE & 31))
+#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
+#define NEED_PAE (1<<(X86_FEATURE_PAE & 31))
+#define NEED_CX8 (1<<(X86_FEATURE_CX8 & 31))
+#define NEED_PGE (1<<(X86_FEATURE_PGE & 31))
+#define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31))
+#define NEED_CMOV (1<<(X86_FEATURE_CMOV & 31))
+#define NEED_XMM (1<<(X86_FEATURE_XMM & 31))
+#define NEED_XMM2 (1<<(X86_FEATURE_XMM2 & 31))
+
+#define REQUIRED_MASK0 (NEED_FPU|NEED_PSE|NEED_MSR|NEED_PAE|\
+ NEED_CX8|NEED_PGE|NEED_FXSR|NEED_CMOV|\
+ NEED_XMM|NEED_XMM2)
+#define SSE_MASK (NEED_XMM|NEED_XMM2)
+
+/* x86-64 baseline features */
+#define NEED_LM (1<<(X86_FEATURE_LM & 31))
+
+#ifdef CONFIG_X86_USE_3DNOW
+# define NEED_3DNOW (1<<(X86_FEATURE_3DNOW & 31))
+#else
+# define NEED_3DNOW 0
+#endif
+
+#define REQUIRED_MASK1 (NEED_LM|NEED_3DNOW)
+
+#define REQUIRED_MASK2 0
+#define REQUIRED_MASK3 0
+#define REQUIRED_MASK4 0
+#define REQUIRED_MASK5 0
+#define REQUIRED_MASK6 0
+#define REQUIRED_MASK7 0
+
+#endif
#include <asm/cache.h>
+/* Simple and small GDT entries for booting only */
+
+#define GDT_ENTRY_BOOT_CS 2
+#define __BOOT_CS (GDT_ENTRY_BOOT_CS * 8)
+
+#define GDT_ENTRY_BOOT_DS (GDT_ENTRY_BOOT_CS + 1)
+#define __BOOT_DS (GDT_ENTRY_BOOT_DS * 8)
+
#define __KERNEL_CS 0x10
#define __KERNEL_DS 0x18
#define pci_ubnmap_len(PTR, LEN_NAME) (0)
#define pci_unmap_len_set(PTR, LEN_NAME, VAL) do { } while (0)
-/* We cannot access memory above 4GB */
-#define pci_dac_dma_supported(pci_dev, mask) (0)
-
/* Map a range of PCI memory or I/O space for a device into user space */
int pci_mmap_page_range(struct pci_dev *pdev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state, int write_combine);
/* Tell drivers/pci/proc.c that we have pci_mmap_page_range() */
#define HAVE_PCI_MMAP 1
-static inline void pcibios_add_platform_entries(struct pci_dev *dev)
-{
-}
-
#endif /* __KERNEL__ */
/* Implement the pci_ DMA API in terms of the generic device dma_ one */
header-y += in_route.h
header-y += ioctl.h
header-y += ipmi_msgdefs.h
-header-y += ip_mp_alg.h
header-y += ipsec.h
header-y += ipx.h
header-y += irda.h
unifdef-y += if_frad.h
unifdef-y += if_ltalk.h
unifdef-y += if_link.h
+unifdef-y += if_pppol2tp.h
unifdef-y += if_pppox.h
unifdef-y += if_shaper.h
unifdef-y += if_tr.h
extern int pci_find_aer_capability(struct pci_dev *dev);
extern int pci_disable_pcie_error_reporting(struct pci_dev *dev);
extern int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev);
+extern int pci_cleanup_aer_correct_error_status(struct pci_dev *dev);
#else
-#define pci_enable_pcie_error_reporting(dev) do { } while (0)
-#define pci_find_aer_capability(dev) do { } while (0)
-#define pci_disable_pcie_error_reporting(dev) do { } while (0)
-#define pci_cleanup_aer_uncorrect_error_status(dev) do { } while (0)
+#define pci_enable_pcie_error_reporting(dev) (-EINVAL)
+#define pci_find_aer_capability(dev) (0)
+#define pci_disable_pcie_error_reporting(dev) (-EINVAL)
+#define pci_cleanup_aer_uncorrect_error_status(dev) (-EINVAL)
+#define pci_cleanup_aer_correct_error_status(dev) (-EINVAL)
#endif
#endif //_AER_H_
ATA_CMD_SET_MAX = 0xF9,
ATA_CMD_SET_MAX_EXT = 0x37,
ATA_CMD_READ_LOG_EXT = 0x2f,
+ ATA_CMD_PMP_READ = 0xE4,
+ ATA_CMD_PMP_WRITE = 0xE8,
/* READ_LOG_EXT pages */
ATA_LOG_SATA_NCQ = 0x10,
0=to device, 1=to host */
ATAPI_CDB_LEN = 16,
+ /* PMP stuff */
+ SATA_PMP_MAX_PORTS = 15,
+ SATA_PMP_CTRL_PORT = 15,
+
+ SATA_PMP_GSCR_DWORDS = 128,
+ SATA_PMP_GSCR_PROD_ID = 0,
+ SATA_PMP_GSCR_REV = 1,
+ SATA_PMP_GSCR_PORT_INFO = 2,
+ SATA_PMP_GSCR_ERROR = 32,
+ SATA_PMP_GSCR_ERROR_EN = 33,
+ SATA_PMP_GSCR_FEAT = 64,
+ SATA_PMP_GSCR_FEAT_EN = 96,
+
+ SATA_PMP_PSCR_STATUS = 0,
+ SATA_PMP_PSCR_ERROR = 1,
+ SATA_PMP_PSCR_CONTROL = 2,
+
+ SATA_PMP_FEAT_BIST = (1 << 0),
+ SATA_PMP_FEAT_PMREQ = (1 << 1),
+ SATA_PMP_FEAT_DYNSSC = (1 << 2),
+ SATA_PMP_FEAT_NOTIFY = (1 << 3),
+
/* cable types */
ATA_CBL_NONE = 0,
ATA_CBL_PATA40 = 1,
return ((block + n_block - 1) < ((u64)1 << 48)) && (n_block <= 65536);
}
+#define sata_pmp_gscr_vendor(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] & 0xffff)
+#define sata_pmp_gscr_devid(gscr) ((gscr)[SATA_PMP_GSCR_PROD_ID] >> 16)
+#define sata_pmp_gscr_rev(gscr) (((gscr)[SATA_PMP_GSCR_REV] >> 8) & 0xff)
+#define sata_pmp_gscr_ports(gscr) ((gscr)[SATA_PMP_GSCR_PORT_INFO] & 0xf)
+
#endif /* __LINUX_ATA_H__ */
void debugfs_remove(struct dentry *dentry);
+struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
+ struct dentry *new_dir, const char *new_name);
+
struct dentry *debugfs_create_u8(const char *name, mode_t mode,
struct dentry *parent, u8 *value);
struct dentry *debugfs_create_u16(const char *name, mode_t mode,
static inline void debugfs_remove(struct dentry *dentry)
{ }
+static inline struct dentry *debugfs_rename(struct dentry *old_dir, struct dentry *old_dentry,
+ struct dentry *new_dir, char *new_name)
+{
+ return ERR_PTR(-ENODEV);
+}
+
static inline struct dentry *debugfs_create_u8(const char *name, mode_t mode,
struct dentry *parent,
u8 *value)
* @devt: for internal use by the driver core only.
* @node: for internal use by the driver core only.
* @kobj: for internal use by the driver core only.
- * @devt_attr: for internal use by the driver core only.
* @groups: optional additional groups to be created
* @dev: if set, a symlink to the struct device is created in the sysfs
* directory for this struct class device.
struct kobject kobj;
struct class * class; /* required */
dev_t devt; /* dev_t, creates the sysfs "dev" */
- struct class_device_attribute *devt_attr;
- struct class_device_attribute uevent_attr;
struct device * dev; /* not necessary, but nice to have */
void * class_data; /* class-specific data */
struct class_device *parent; /* parent of this child device, if there is one */
struct device_type *type;
unsigned is_registered:1;
unsigned uevent_suppress:1;
- struct device_attribute uevent_attr;
- struct device_attribute *devt_attr;
struct semaphore sem; /* semaphore to synchronize calls to
* its driver.
DMI_PRODUCT_NAME,
DMI_PRODUCT_VERSION,
DMI_PRODUCT_SERIAL,
+ DMI_PRODUCT_UUID,
DMI_BOARD_VENDOR,
DMI_BOARD_NAME,
DMI_BOARD_VERSION,
+ DMI_BOARD_SERIAL,
+ DMI_BOARD_ASSET_TAG,
+ DMI_CHASSIS_VENDOR,
+ DMI_CHASSIS_TYPE,
+ DMI_CHASSIS_VERSION,
+ DMI_CHASSIS_SERIAL,
+ DMI_CHASSIS_ASSET_TAG,
DMI_STRING_MAX,
};
#define EDD_MBR_SIG_MAX 16 /* max number of signatures to store */
#define EDD_MBR_SIG_NR_BUF 0x1ea /* addr of number of MBR signtaures at EDD_MBR_SIG_BUF
in boot_params - treat this as 1 byte */
-#define EDD_CL_EQUALS 0x3d646465 /* "edd=" */
-#define EDD_CL_OFF 0x666f /* "of" for off */
-#define EDD_CL_SKIP 0x6b73 /* "sk" for skipmbr */
-#define EDD_CL_ON 0x6e6f /* "on" for on */
#ifndef __ASSEMBLY__
extern int eth_header_cache(struct neighbour *neigh,
struct hh_cache *hh);
-extern struct net_device *alloc_etherdev(int sizeof_priv);
-static inline void eth_copy_and_sum (struct sk_buff *dest,
- const unsigned char *src,
- int len, int base)
-{
- memcpy (dest->data, src, len);
-}
+extern struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count);
+#define alloc_etherdev(sizeof_priv) alloc_etherdev_mq(sizeof_priv, 1)
/**
* is_zero_ether_addr - Determine if give Ethernet address is all zeros.
const u8 *values);
/* Returns the number of read bytes */
extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
- u8 command, u8 *values);
+ u8 command, u8 length, u8 *values);
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
u8 command, u8 length,
const u8 *values);
/**
* struct i2c_client - represent an I2C slave device
+ * @flags: I2C_CLIENT_TEN indicates the device uses a ten bit chip address;
+ * I2C_CLIENT_PEC indicates it uses SMBus Packet Error Checking
* @addr: Address used on the I2C bus connected to the parent adapter.
* @name: Indicates the type of the device, usually a chip name that's
* generic enough to hide second-sourcing and compatible revisions.
+ * @adapter: manages the bus segment hosting this I2C device
* @dev: Driver model device node for the slave.
+ * @irq: indicates the IRQ generated by this device (if any)
* @driver_name: Identifies new-style driver used with this device; also
* used as the module name for hotplug/coldplug modprobe support.
*
* An i2c_client identifies a single device (i.e. chip) connected to an
- * i2c bus. The behaviour is defined by the routines of the driver.
+ * i2c bus. The behaviour exposed to Linux is defined by the driver
+ * managing the device.
*/
struct i2c_client {
unsigned short flags; /* div., see below */
static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj)
{
- return to_i2c_client(container_of(kobj, struct device, kobj));
+ struct device * const dev = container_of(kobj, struct device, kobj);
+ return to_i2c_client(dev);
}
static inline void *i2c_get_clientdata (struct i2c_client *dev)
* @addr: stored in i2c_client.addr
* @platform_data: stored in i2c_client.dev.platform_data
* @irq: stored in i2c_client.irq
-
+ *
* I2C doesn't actually support hardware probing, although controllers and
* devices may be able to use I2C_SMBUS_QUICK to tell whether or not there's
* a device at a given address. Drivers commonly need more information than
* i2c_board_info is used to build tables of information listing I2C devices
* that are present. This information is used to grow the driver model tree
* for "new style" I2C drivers. For mainboards this is done statically using
- * i2c_register_board_info(), where @bus_num represents an adapter that isn't
+ * i2c_register_board_info(); bus numbers identify adapters that aren't
* yet available. For add-on boards, i2c_new_device() does this dynamically
* with the adapter already known.
*/
#define I2C_SMBUS_WORD_DATA 3
#define I2C_SMBUS_PROC_CALL 4
#define I2C_SMBUS_BLOCK_DATA 5
-#define I2C_SMBUS_I2C_BLOCK_DATA 6
+#define I2C_SMBUS_I2C_BLOCK_BROKEN 6
#define I2C_SMBUS_BLOCK_PROC_CALL 7 /* SMBus 2.0 */
+#define I2C_SMBUS_I2C_BLOCK_DATA 8
/* ----- commands for the ioctl like i2c_command call:
void idr_destroy(struct idr *idp);
void idr_init(struct idr *idp);
+
+/*
+ * IDA - IDR based id allocator, use when translation from id to
+ * pointer isn't necessary.
+ */
+#define IDA_CHUNK_SIZE 128 /* 128 bytes per chunk */
+#define IDA_BITMAP_LONGS (128 / sizeof(long) - 1)
+#define IDA_BITMAP_BITS (IDA_BITMAP_LONGS * sizeof(long) * 8)
+
+struct ida_bitmap {
+ long nr_busy;
+ unsigned long bitmap[IDA_BITMAP_LONGS];
+};
+
+struct ida {
+ struct idr idr;
+ struct ida_bitmap *free_bitmap;
+};
+
+#define IDA_INIT(name) { .idr = IDR_INIT(name), .free_bitmap = NULL, }
+#define DEFINE_IDA(name) struct ida name = IDA_INIT(name)
+
+int ida_pre_get(struct ida *ida, gfp_t gfp_mask);
+int ida_get_new_above(struct ida *ida, int starting_id, int *p_id);
+int ida_get_new(struct ida *ida, int *p_id);
+void ida_remove(struct ida *ida, int id);
+void ida_destroy(struct ida *ida);
+void ida_init(struct ida *ida);
+
#endif /* __IDR_H__ */
#define IFLA_WEIGHT IFLA_WEIGHT
IFLA_OPERSTATE,
IFLA_LINKMODE,
+ IFLA_LINKINFO,
+#define IFLA_LINKINFO IFLA_LINKINFO
__IFLA_MAX
};
__u32 retrans_time;
};
+enum
+{
+ IFLA_INFO_UNSPEC,
+ IFLA_INFO_KIND,
+ IFLA_INFO_DATA,
+ IFLA_INFO_XSTATS,
+ __IFLA_INFO_MAX,
+};
+
+#define IFLA_INFO_MAX (__IFLA_INFO_MAX - 1)
+
+/* VLAN section */
+
+enum
+{
+ IFLA_VLAN_UNSPEC,
+ IFLA_VLAN_ID,
+ IFLA_VLAN_FLAGS,
+ IFLA_VLAN_EGRESS_QOS,
+ IFLA_VLAN_INGRESS_QOS,
+ __IFLA_VLAN_MAX,
+};
+
+#define IFLA_VLAN_MAX (__IFLA_VLAN_MAX - 1)
+
+struct ifla_vlan_flags {
+ __u32 flags;
+ __u32 mask;
+};
+
+enum
+{
+ IFLA_VLAN_QOS_UNSPEC,
+ IFLA_VLAN_QOS_MAPPING,
+ __IFLA_VLAN_QOS_MAX
+};
+
+#define IFLA_VLAN_QOS_MAX (__IFLA_VLAN_QOS_MAX - 1)
+
+struct ifla_vlan_qos_mapping
+{
+ __u32 from;
+ __u32 to;
+};
+
#endif /* _LINUX_IF_LINK_H */
struct ppp_comp_stats stats;
};
+/* For PPPIOCGL2TPSTATS */
+struct pppol2tp_ioc_stats {
+ __u16 tunnel_id; /* redundant */
+ __u16 session_id; /* if zero, get tunnel stats */
+ __u32 using_ipsec:1; /* valid only for session_id == 0 */
+ aligned_u64 tx_packets;
+ aligned_u64 tx_bytes;
+ aligned_u64 tx_errors;
+ aligned_u64 rx_packets;
+ aligned_u64 rx_bytes;
+ aligned_u64 rx_seq_discards;
+ aligned_u64 rx_oos_packets;
+ aligned_u64 rx_errors;
+};
+
#define ifr__name b.ifr_ifrn.ifrn_name
#define stats_ptr b.ifr_ifru.ifru_data
#define PPPIOCDISCONN _IO('t', 57) /* disconnect channel */
#define PPPIOCATTCHAN _IOW('t', 56, int) /* attach to ppp channel */
#define PPPIOCGCHAN _IOR('t', 55, int) /* get ppp channel number */
+#define PPPIOCGL2TPSTATS _IOR('t', 54, struct pppol2tp_ioc_stats)
#define SIOCGPPPSTATS (SIOCDEVPRIVATE + 0)
#define SIOCGPPPVER (SIOCDEVPRIVATE + 1) /* NEVER change this!! */
--- /dev/null
+/***************************************************************************
+ * Linux PPP over L2TP (PPPoL2TP) Socket Implementation (RFC 2661)
+ *
+ * This file supplies definitions required by the PPP over L2TP driver
+ * (pppol2tp.c). All version information wrt this file is located in pppol2tp.c
+ *
+ * License:
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#ifndef __LINUX_IF_PPPOL2TP_H
+#define __LINUX_IF_PPPOL2TP_H
+
+#include <asm/types.h>
+
+#ifdef __KERNEL__
+#include <linux/in.h>
+#endif
+
+/* Structure used to connect() the socket to a particular tunnel UDP
+ * socket.
+ */
+struct pppol2tp_addr
+{
+ pid_t pid; /* pid that owns the fd.
+ * 0 => current */
+ int fd; /* FD of UDP socket to use */
+
+ struct sockaddr_in addr; /* IP address and port to send to */
+
+ __be16 s_tunnel, s_session; /* For matching incoming packets */
+ __be16 d_tunnel, d_session; /* For sending outgoing packets */
+};
+
+/* Socket options:
+ * DEBUG - bitmask of debug message categories
+ * SENDSEQ - 0 => don't send packets with sequence numbers
+ * 1 => send packets with sequence numbers
+ * RECVSEQ - 0 => receive packet sequence numbers are optional
+ * 1 => drop receive packets without sequence numbers
+ * LNSMODE - 0 => act as LAC.
+ * 1 => act as LNS.
+ * REORDERTO - reorder timeout (in millisecs). If 0, don't try to reorder.
+ */
+enum {
+ PPPOL2TP_SO_DEBUG = 1,
+ PPPOL2TP_SO_RECVSEQ = 2,
+ PPPOL2TP_SO_SENDSEQ = 3,
+ PPPOL2TP_SO_LNSMODE = 4,
+ PPPOL2TP_SO_REORDERTO = 5,
+};
+
+/* Debug message categories for the DEBUG socket option */
+enum {
+ PPPOL2TP_MSG_DEBUG = (1 << 0), /* verbose debug (if
+ * compiled in) */
+ PPPOL2TP_MSG_CONTROL = (1 << 1), /* userspace - kernel
+ * interface */
+ PPPOL2TP_MSG_SEQ = (1 << 2), /* sequence numbers */
+ PPPOL2TP_MSG_DATA = (1 << 3), /* data packets */
+};
+
+
+
+#endif
#include <asm/semaphore.h>
#include <linux/ppp_channel.h>
#endif /* __KERNEL__ */
+#include <linux/if_pppol2tp.h>
/* For user-space programs to pick up these definitions
* which they wouldn't get otherwise without defining __KERNEL__
* Protocols supported by AF_PPPOX
*/
#define PX_PROTO_OE 0 /* Currently just PPPoE */
-#define PX_MAX_PROTO 1
-
+#define PX_PROTO_OL2TP 1 /* Now L2TP also */
+#define PX_MAX_PROTO 2
+
struct sockaddr_pppox {
sa_family_t sa_family; /* address family, AF_PPPOX */
unsigned int sa_protocol; /* protocol identifier */
}sa_addr;
}__attribute__ ((packed));
+/* The use of the above union isn't viable because the size of this
+ * struct must stay fixed over time -- applications use sizeof(struct
+ * sockaddr_pppox) to fill it. We use a protocol specific sockaddr
+ * type instead.
+ */
+struct sockaddr_pppol2tp {
+ sa_family_t sa_family; /* address family, AF_PPPOX */
+ unsigned int sa_protocol; /* protocol identifier */
+ struct pppol2tp_addr pppol2tp;
+}__attribute__ ((packed));
/*********************************************************************
*
unsigned long flags;
int attached;
uid_t owner;
+ gid_t group;
wait_queue_head_t read_wait;
struct sk_buff_head readq;
#define TUNSETPERSIST _IOW('T', 203, int)
#define TUNSETOWNER _IOW('T', 204, int)
#define TUNSETLINK _IOW('T', 205, int)
+#define TUNSETGROUP _IOW('T', 206, int)
/* TUNSETIFF ifr flags */
#define IFF_TUN 0x0001
}
struct vlan_priority_tci_mapping {
- unsigned long priority;
+ u32 priority;
unsigned short vlan_qos; /* This should be shifted when first set, so we only do it
* at provisioning time.
* ((skb->priority << 13) & 0xE000)
/** This will be the mapping that correlates skb->priority to
* 3 bits of VLAN QOS tags...
*/
- unsigned long ingress_priority_map[8];
+ unsigned int nr_ingress_mappings;
+ u32 ingress_priority_map[8];
+
+ unsigned int nr_egress_mappings;
struct vlan_priority_tci_mapping *egress_priority_map[16]; /* hash table */
unsigned short vlan_id; /* The VLAN Identifier for this interface. */
int old_allmulti; /* similar to above. */
int old_promiscuity; /* similar to above. */
struct net_device *real_dev; /* the underlying device/interface */
+ unsigned char real_dev_addr[ETH_ALEN];
struct proc_dir_entry *dent; /* Holds the proc data */
unsigned long cnt_inc_headroom_on_tx; /* How many times did we have to grow the skb on TX. */
unsigned long cnt_encap_on_xmit; /* How many times did we have to encapsulate the skb on TX. */
GET_VLAN_VID_CMD /* Get the VID of this VLAN (specified by name) */
};
+enum vlan_flags {
+ VLAN_FLAG_REORDER_HDR = 0x1,
+};
+
enum vlan_name_types {
VLAN_NAME_TYPE_PLUS_VID, /* Name will look like: vlan0005 */
VLAN_NAME_TYPE_RAW_PLUS_VID, /* name will look like: eth1.0005 */
+++ /dev/null
-/* ip_mp_alg.h: IPV4 multipath algorithm support, user-visible values.
- *
- * Copyright (C) 2004, 2005 Einar Lueck <elueck@de.ibm.com>
- * Copyright (C) 2005 David S. Miller <davem@davemloft.net>
- */
-
-#ifndef _LINUX_IP_MP_ALG_H
-#define _LINUX_IP_MP_ALG_H
-
-enum ip_mp_alg {
- IP_MP_ALG_NONE,
- IP_MP_ALG_RR,
- IP_MP_ALG_DRR,
- IP_MP_ALG_RANDOM,
- IP_MP_ALG_WRANDOM,
- __IP_MP_ALG_MAX
-};
-
-#define IP_MP_ALG_MAX (__IP_MP_ALG_MAX - 1)
-
-#endif /* _LINUX_IP_MP_ALG_H */
-
int ifr6_ifindex;
};
-#define IPV6_SRCRT_STRICT 0x01 /* this hop must be a neighbor */
-#define IPV6_SRCRT_TYPE_0 0 /* IPv6 type 0 Routing Header */
+#define IPV6_SRCRT_STRICT 0x01 /* Deprecated; will be removed */
+#define IPV6_SRCRT_TYPE_0 0 /* Deprecated; will be removed */
#define IPV6_SRCRT_TYPE_2 2 /* IPv6 type 2 Routing Header */
/*
__u16 lastopt;
__u32 nhoff;
__u16 flags;
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
__u16 dsthao;
#endif
/* pktoption flags */
union {
struct {
- __u16 srcrt:2,
- osrcrt:2,
+ __u16 srcrt:1,
+ osrcrt:1,
rxinfo:1,
rxoinfo:1,
rxhlim:1,
#define ifr_dtr ifr_ifru.ifru_line.dtr
#define ifr_rts ifr_ifru.ifru_line.rts
+
+/* IrDA netlink definitions */
+#define IRDA_NL_NAME "irda"
+#define IRDA_NL_VERSION 1
+
+enum irda_nl_commands {
+ IRDA_NL_CMD_UNSPEC,
+ IRDA_NL_CMD_SET_MODE,
+ IRDA_NL_CMD_GET_MODE,
+
+ __IRDA_NL_CMD_AFTER_LAST
+};
+#define IRDA_NL_CMD_MAX (__IRDA_NL_CMD_AFTER_LAST - 1)
+
+enum nl80211_attrs {
+ IRDA_NL_ATTR_UNSPEC,
+ IRDA_NL_ATTR_IFNAME,
+ IRDA_NL_ATTR_MODE,
+
+ __IRDA_NL_ATTR_AFTER_LAST
+};
+#define IRDA_NL_ATTR_MAX (__IRDA_NL_ATTR_AFTER_LAST - 1)
+
+/* IrDA modes */
+#define IRDA_MODE_PRIMARY 0x1
+#define IRDA_MODE_SECONDARY 0x2
+#define IRDA_MODE_MONITOR 0x4
+
#endif /* KERNEL_IRDA_H */
struct kobject * parent;
struct kset * kset;
struct kobj_type * ktype;
- struct dentry * dentry;
+ struct sysfs_dirent * sd;
wait_queue_head_t poll;
};
extern void kobject_cleanup(struct kobject *);
extern int __must_check kobject_add(struct kobject *);
-extern int __must_check kobject_shadow_add(struct kobject *, struct dentry *);
+extern int __must_check kobject_shadow_add(struct kobject *kobj,
+ struct sysfs_dirent *shadow_parent);
extern void kobject_del(struct kobject *);
extern int __must_check kobject_rename(struct kobject *, const char *new_name);
extern int __must_check kobject_shadow_rename(struct kobject *kobj,
- struct dentry *new_parent,
- const char *new_name);
+ struct sysfs_dirent *new_parent,
+ const char *new_name);
extern int __must_check kobject_move(struct kobject *, struct kobject *);
extern int __must_check kobject_register(struct kobject *);
return (s64) tv.tv_sec * USEC_PER_SEC + tv.tv_usec;
}
+static inline s64 ktime_us_delta(const ktime_t later, const ktime_t earlier)
+{
+ return ktime_to_us(ktime_sub(later, earlier));
+}
+
+static inline ktime_t ktime_add_us(const ktime_t kt, const u64 usec)
+{
+ return ktime_add_ns(kt, usec * 1000);
+}
+
/*
* The resolution of the clocks. The resolution value is returned in
* the clock_getres() system call to give application programmers an
ATA_PFLAG_SCSI_HOTPLUG = (1 << 6), /* SCSI hotplug scheduled */
ATA_PFLAG_INITIALIZING = (1 << 7), /* being initialized, don't touch */
- ATA_PFLAG_FLUSH_PORT_TASK = (1 << 16), /* flush port task */
ATA_PFLAG_SUSPENDED = (1 << 17), /* port is suspended (power) */
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
ATA_PFLAG_GTM_VALID = (1 << 19), /* acpi_gtm data valid */
struct ata_port *ap;
unsigned int devno; /* 0 or 1 */
unsigned long flags; /* ATA_DFLAG_xxx */
+ unsigned int horkage; /* List of broken features */
struct scsi_device *sdev; /* attached SCSI device */
#ifdef CONFIG_ATA_ACPI
acpi_handle acpi_handle;
/* error history */
struct ata_ering ering;
int spdn_cnt;
- unsigned int horkage; /* List of broken features */
};
/* Offset into struct ata_device. Fields above it are maintained
extern void ata_id_c_string(const u16 *id, unsigned char *s,
unsigned int ofs, unsigned int len);
extern void ata_id_to_dma_mode(struct ata_device *dev, u8 unknown);
-extern unsigned long ata_device_blacklisted(const struct ata_device *dev);
extern void ata_bmdma_setup (struct ata_queued_cmd *qc);
extern void ata_bmdma_start (struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
unsigned long val;
};
-extern int ata_pci_init_native_host(struct ata_host *host);
+extern int ata_pci_init_sff_host(struct ata_host *host);
extern int ata_pci_init_bmdma(struct ata_host *host);
-extern int ata_pci_prepare_native_host(struct pci_dev *pdev,
- const struct ata_port_info * const * ppi,
- struct ata_host **r_host);
+extern int ata_pci_prepare_sff_host(struct pci_dev *pdev,
+ const struct ata_port_info * const * ppi,
+ struct ata_host **r_host);
extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits);
extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long);
#endif /* CONFIG_PCI */
#define MAX_HEADER (LL_MAX_HEADER + 48)
#endif
+struct net_device_subqueue
+{
+ /* Give a control state for each queue. This struct may contain
+ * per-queue locks in the future.
+ */
+ unsigned long state;
+};
+
/*
* Network device statistics. Akin to the 2.0 ether stats but
* with byte counters.
DECLARE_PER_CPU(struct netif_rx_stats, netdev_rx_stat);
+struct dev_addr_list
+{
+ struct dev_addr_list *next;
+ u8 da_addr[MAX_ADDR_LEN];
+ u8 da_addrlen;
+ int da_users;
+ int da_gusers;
+};
/*
* We tag multicasts with these structures.
*/
-
-struct dev_mc_list
-{
- struct dev_mc_list *next;
- __u8 dmi_addr[MAX_ADDR_LEN];
- unsigned char dmi_addrlen;
- int dmi_users;
- int dmi_gusers;
-};
+
+#define dev_mc_list dev_addr_list
+#define dmi_addr da_addr
+#define dmi_addrlen da_addrlen
+#define dmi_users da_users
+#define dmi_gusers da_gusers
struct hh_cache
{
__LINK_STATE_LINKWATCH_PENDING,
__LINK_STATE_DORMANT,
__LINK_STATE_QDISC_RUNNING,
+ /* Set by the netpoll NAPI code */
+ __LINK_STATE_POLL_LIST_FROZEN,
};
/* Net device features */
unsigned long features;
#define NETIF_F_SG 1 /* Scatter/gather IO. */
-#define NETIF_F_IP_CSUM 2 /* Can checksum only TCP/UDP over IPv4. */
+#define NETIF_F_IP_CSUM 2 /* Can checksum TCP/UDP over IPv4. */
#define NETIF_F_NO_CSUM 4 /* Does not require checksum. F.e. loopack. */
#define NETIF_F_HW_CSUM 8 /* Can checksum all the packets. */
+#define NETIF_F_IPV6_CSUM 16 /* Can checksum TCP/UDP over IPV6 */
#define NETIF_F_HIGHDMA 32 /* Can DMA to high memory. */
#define NETIF_F_FRAGLIST 64 /* Scatter/gather IO. */
#define NETIF_F_HW_VLAN_TX 128 /* Transmit VLAN hw acceleration */
#define NETIF_F_VLAN_CHALLENGED 1024 /* Device cannot handle VLAN packets */
#define NETIF_F_GSO 2048 /* Enable software GSO. */
#define NETIF_F_LLTX 4096 /* LockLess TX */
+#define NETIF_F_MULTI_QUEUE 16384 /* Has multiple TX/RX queues */
/* Segmentation offload features */
#define NETIF_F_GSO_SHIFT 16
/* List of features with software fallbacks. */
#define NETIF_F_GSO_SOFTWARE (NETIF_F_TSO | NETIF_F_TSO_ECN | NETIF_F_TSO6)
+
#define NETIF_F_GEN_CSUM (NETIF_F_NO_CSUM | NETIF_F_HW_CSUM)
-#define NETIF_F_ALL_CSUM (NETIF_F_IP_CSUM | NETIF_F_GEN_CSUM)
+#define NETIF_F_V4_CSUM (NETIF_F_GEN_CSUM | NETIF_F_IP_CSUM)
+#define NETIF_F_V6_CSUM (NETIF_F_GEN_CSUM | NETIF_F_IPV6_CSUM)
+#define NETIF_F_ALL_CSUM (NETIF_F_V4_CSUM | NETIF_F_V6_CSUM)
struct net_device *next_sched;
unsigned char addr_len; /* hardware address length */
unsigned short dev_id; /* for shared network cards */
- struct dev_mc_list *mc_list; /* Multicast mac addresses */
+ struct dev_addr_list *uc_list; /* Secondary unicast mac addresses */
+ int uc_count; /* Number of installed ucasts */
+ int uc_promisc;
+ struct dev_addr_list *mc_list; /* Multicast mac addresses */
int mc_count; /* Number of installed mcasts */
int promiscuity;
int allmulti;
void *saddr,
unsigned len);
int (*rebuild_header)(struct sk_buff *skb);
+#define HAVE_SET_RX_MODE
+ void (*set_rx_mode)(struct net_device *dev);
#define HAVE_MULTICAST
void (*set_multicast_list)(struct net_device *dev);
#define HAVE_SET_MAC_ADDR
struct device dev;
/* space for optional statistics and wireless sysfs groups */
struct attribute_group *sysfs_groups[3];
+
+ /* rtnetlink link ops */
+ const struct rtnl_link_ops *rtnl_link_ops;
+
+ /* The TX queue control structures */
+ unsigned int egress_subqueue_count;
+ struct net_device_subqueue egress_subqueue[0];
};
#define to_net_dev(d) container_of(d, struct net_device, dev)
#define NETDEV_ALIGN 32
#define NETDEV_ALIGN_CONST (NETDEV_ALIGN - 1)
-static inline void *netdev_priv(struct net_device *dev)
+static inline void *netdev_priv(const struct net_device *dev)
{
- return (char *)dev + ((sizeof(struct net_device)
- + NETDEV_ALIGN_CONST)
- & ~NETDEV_ALIGN_CONST);
+ return dev->priv;
}
#define SET_MODULE_OWNER(dev) do { } while (0)
return test_bit(__LINK_STATE_START, &dev->state);
}
+/*
+ * Routines to manage the subqueues on a device. We only need start
+ * stop, and a check if it's stopped. All other device management is
+ * done at the overall netdevice level.
+ * Also test the device if we're multiqueue.
+ */
+static inline void netif_start_subqueue(struct net_device *dev, u16 queue_index)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ clear_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state);
+#endif
+}
+
+static inline void netif_stop_subqueue(struct net_device *dev, u16 queue_index)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+#ifdef CONFIG_NETPOLL_TRAP
+ if (netpoll_trap())
+ return;
+#endif
+ set_bit(__LINK_STATE_XOFF, &dev->egress_subqueue[queue_index].state);
+#endif
+}
+
+static inline int netif_subqueue_stopped(const struct net_device *dev,
+ u16 queue_index)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ return test_bit(__LINK_STATE_XOFF,
+ &dev->egress_subqueue[queue_index].state);
+#else
+ return 0;
+#endif
+}
+
+static inline void netif_wake_subqueue(struct net_device *dev, u16 queue_index)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+#ifdef CONFIG_NETPOLL_TRAP
+ if (netpoll_trap())
+ return;
+#endif
+ if (test_and_clear_bit(__LINK_STATE_XOFF,
+ &dev->egress_subqueue[queue_index].state))
+ __netif_schedule(dev);
+#endif
+}
+
+static inline int netif_is_multiqueue(const struct net_device *dev)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ return (!!(NETIF_F_MULTI_QUEUE & dev->features));
+#else
+ return 0;
+#endif
+}
/* Use this variant when it is known for sure that it
* is executing from interrupt context.
{
unsigned long flags;
+#ifdef CONFIG_NETPOLL
+ /* Prevent race with netpoll - yes, this is a kludge.
+ * But at least it doesn't penalize the non-netpoll
+ * code path. */
+ if (test_bit(__LINK_STATE_POLL_LIST_FROZEN, &dev->state))
+ return;
+#endif
+
local_irq_save(flags);
__netif_rx_complete(dev);
local_irq_restore(flags);
extern void ether_setup(struct net_device *dev);
/* Support for loadable net-drivers */
-extern struct net_device *alloc_netdev(int sizeof_priv, const char *name,
- void (*setup)(struct net_device *));
+extern struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
+ void (*setup)(struct net_device *),
+ unsigned int queue_count);
+#define alloc_netdev(sizeof_priv, name, setup) \
+ alloc_netdev_mq(sizeof_priv, name, setup, 1)
extern int register_netdev(struct net_device *dev);
extern void unregister_netdev(struct net_device *dev);
-/* Functions used for multicast support */
-extern void dev_mc_upload(struct net_device *dev);
+/* Functions used for secondary unicast and multicast support */
+extern void dev_set_rx_mode(struct net_device *dev);
+extern void __dev_set_rx_mode(struct net_device *dev);
+extern int dev_unicast_delete(struct net_device *dev, void *addr, int alen);
+extern int dev_unicast_add(struct net_device *dev, void *addr, int alen);
extern int dev_mc_delete(struct net_device *dev, void *addr, int alen, int all);
extern int dev_mc_add(struct net_device *dev, void *addr, int alen, int newonly);
extern void dev_mc_discard(struct net_device *dev);
+extern int __dev_addr_delete(struct dev_addr_list **list, int *count, void *addr, int alen, int all);
+extern int __dev_addr_add(struct dev_addr_list **list, int *count, void *addr, int alen, int newonly);
+extern void __dev_addr_discard(struct dev_addr_list **list);
extern void dev_set_promiscuity(struct net_device *dev, int inc);
extern void dev_set_allmulti(struct net_device *dev, int inc);
extern void netdev_state_change(struct net_device *dev);
};
extern int nf_register_queue_handler(int pf,
struct nf_queue_handler *qh);
-extern int nf_unregister_queue_handler(int pf);
+extern int nf_unregister_queue_handler(int pf,
+ struct nf_queue_handler *qh);
extern void nf_unregister_queue_handlers(struct nf_queue_handler *qh);
extern void nf_reinject(struct sk_buff *skb,
struct nf_info *info,
#include <linux/netfilter/nf_conntrack_common.h>
+extern const char *pptp_msg_name[];
+
/* state of the control session */
enum pptp_ctrlsess_state {
PPTP_SESSION_NONE, /* no session present */
/* Arguments changed since 2.6.9, as this must now handle
non-linear skb, using skb_header_pointer and
skb_ip_make_writable. */
- int (*match)(const struct sk_buff *skb,
- const struct net_device *in,
- const struct net_device *out,
- const struct xt_match *match,
- const void *matchinfo,
- int offset,
- unsigned int protoff,
- int *hotdrop);
+ bool (*match)(const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ const struct xt_match *match,
+ const void *matchinfo,
+ int offset,
+ unsigned int protoff,
+ bool *hotdrop);
/* Called when user tries to insert an entry of this type. */
/* Should return true or false. */
- int (*checkentry)(const char *tablename,
- const void *ip,
- const struct xt_match *match,
- void *matchinfo,
- unsigned int hook_mask);
+ bool (*checkentry)(const char *tablename,
+ const void *ip,
+ const struct xt_match *match,
+ void *matchinfo,
+ unsigned int hook_mask);
/* Called when entry of this type deleted. */
void (*destroy)(const struct xt_match *match, void *matchinfo);
hook_mask is a bitmask of hooks from which it can be
called. */
/* Should return true or false. */
- int (*checkentry)(const char *tablename,
- const void *entry,
- const struct xt_target *target,
- void *targinfo,
- unsigned int hook_mask);
+ bool (*checkentry)(const char *tablename,
+ const void *entry,
+ const struct xt_target *target,
+ void *targinfo,
+ unsigned int hook_mask);
/* Called when entry of this type deleted. */
void (*destroy)(const struct xt_target *target, void *targinfo);
--- /dev/null
+#ifndef _XT_U32_H
+#define _XT_U32_H 1
+
+enum xt_u32_ops {
+ XT_U32_AND,
+ XT_U32_LEFTSH,
+ XT_U32_RIGHTSH,
+ XT_U32_AT,
+};
+
+struct xt_u32_location_element {
+ u_int32_t number;
+ u_int8_t nextop;
+};
+
+struct xt_u32_value_element {
+ u_int32_t min;
+ u_int32_t max;
+};
+
+/*
+ * Any way to allow for an arbitrary number of elements?
+ * For now, I settle with a limit of 10 each.
+ */
+#define XT_U32_MAXSIZE 10
+
+struct xt_u32_test {
+ struct xt_u32_location_element location[XT_U32_MAXSIZE+1];
+ struct xt_u32_value_element value[XT_U32_MAXSIZE+1];
+ u_int8_t nnums;
+ u_int8_t nvalues;
+};
+
+struct xt_u32 {
+ struct xt_u32_test tests[XT_U32_MAXSIZE+1];
+ u_int8_t ntests;
+ u_int8_t invert;
+};
+
+#endif /* _XT_U32_H */
struct ipt_clusterip_tgt_info {
u_int32_t flags;
-
+
/* only relevant for new ones */
u_int8_t clustermac[6];
u_int16_t num_total_nodes;
u_int16_t num_local_nodes;
u_int16_t local_nodes[CLUSTERIP_MAX_NODES];
- enum clusterip_hashmode hash_mode;
+ u_int32_t hash_mode;
u_int32_t hash_initval;
struct clusterip_config *config;
char iniface[IFNAMSIZ], outiface[IFNAMSIZ];
unsigned char iniface_mask[IFNAMSIZ], outiface_mask[IFNAMSIZ];
- /* ARGH, HopByHop uses 0, so can't do 0 = ANY,
- instead IP6T_F_NOPROTO must be set */
+ /* Upper protocol number
+ * - The allowed value is 0 (any) or protocol number of last parsable
+ * header, which is 50 (ESP), 59 (No Next Header), 135 (MH), or
+ * the non IPv6 extension headers.
+ * - The protocol numbers of IPv6 extension headers except of ESP and
+ * MH do not match any packets.
+ * - You also need to set IP6T_FLAGS_PROTO to "flags" to check protocol.
+ */
u_int16_t proto;
/* TOS to match iff flags & IP6T_F_TOS */
u_int8_t tos;
typedef unsigned short __bitwise pci_bus_flags_t;
enum pci_bus_flags {
- PCI_BUS_FLAGS_NO_MSI = (__force pci_bus_flags_t) 1,
+ PCI_BUS_FLAGS_NO_MSI = (__force pci_bus_flags_t) 1,
+ PCI_BUS_FLAGS_NO_MMRBC = (__force pci_bus_flags_t) 2,
};
struct pci_cap_saved_state {
unsigned short subsystem_vendor;
unsigned short subsystem_device;
unsigned int class; /* 3 bytes: (base,sub,prog-if) */
+ u8 revision; /* PCI revision, low byte of class word */
u8 hdr_type; /* PCI header type (`multi' flag masked out) */
u8 rom_base_reg; /* which config register controls the ROM */
u8 pin; /* which interrupt pin this device uses */
/* ---------------------------------------------------------------- */
/** PCI Error Recovery System (PCI-ERS). If a PCI device driver provides
- * a set fof callbacks in struct pci_error_handlers, then that device driver
+ * a set of callbacks in struct pci_error_handlers, then that device driver
* will be notified of PCI bus errors, and will be driven to recovery
* when an error occurs.
*/
int (*suspend_late) (struct pci_dev *dev, pm_message_t state);
int (*resume_early) (struct pci_dev *dev);
int (*resume) (struct pci_dev *dev); /* Device woken up */
- int (*enable_wake) (struct pci_dev *dev, pci_power_t state, int enable); /* Enable wake event */
void (*shutdown) (struct pci_dev *dev);
struct pci_error_handlers *err_handler;
/* Generic PCI functions exported to card drivers */
struct pci_dev __deprecated *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from);
-struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn);
+struct pci_dev __deprecated *pci_find_slot (unsigned int bus, unsigned int devfn);
int pci_find_capability (struct pci_dev *dev, int cap);
int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap);
int pci_find_ext_capability (struct pci_dev *dev, int cap);
int pci_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state);
#define HAVE_PCI_SET_MWI
int __must_check pci_set_mwi(struct pci_dev *dev);
+int pci_try_set_mwi(struct pci_dev *dev);
void pci_clear_mwi(struct pci_dev *dev);
void pci_intx(struct pci_dev *dev, int enable);
void pci_msi_off(struct pci_dev *dev);
int pci_set_dma_mask(struct pci_dev *dev, u64 mask);
int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask);
+int pcix_get_max_mmrbc(struct pci_dev *dev);
+int pcix_get_mmrbc(struct pci_dev *dev);
+int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc);
+int pcie_set_readrq(struct pci_dev *dev, int rq);
void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno);
int __must_check pci_assign_resource(struct pci_dev *dev, int i);
int __must_check pci_assign_resource_fixed(struct pci_dev *dev, int i);
void __iomem __must_check *pci_map_rom_copy(struct pci_dev *pdev, size_t *size);
void pci_unmap_rom(struct pci_dev *pdev, void __iomem *rom);
void pci_remove_rom(struct pci_dev *pdev);
+size_t pci_get_rom_size(void __iomem *rom, size_t size);
/* Power management related routines */
int pci_save_state(struct pci_dev *dev);
extern unsigned long pci_cardbus_io_size;
extern unsigned long pci_cardbus_mem_size;
+extern int pcibios_add_platform_entries(struct pci_dev *dev);
+
#endif /* __KERNEL__ */
#endif /* LINUX_PCI_H */
/* Vendors and devices. Sort key: vendor first, device next. */
+#define PCI_VENDOR_ID_TTTECH 0x0357
+#define PCI_DEVICE_ID_TTTECH_MC322 0x000a
+
#define PCI_VENDOR_ID_DYNALINK 0x0675
#define PCI_DEVICE_ID_DYNALINK_IS64PH 0x1702
#define PCI_DEVICE_ID_ATI_IXP600_SMBUS 0x4385
#define PCI_DEVICE_ID_ATI_IXP600_IDE 0x438c
#define PCI_DEVICE_ID_ATI_IXP700_SATA 0x4390
+#define PCI_DEVICE_ID_ATI_IXP700_SMBUS 0x4395
#define PCI_DEVICE_ID_ATI_IXP700_IDE 0x439c
#define PCI_VENDOR_ID_VLSI 0x1004
#define PCI_DEVICE_ID_ELSA_MICROLINK 0x1000
#define PCI_DEVICE_ID_ELSA_QS3000 0x3000
-
#define PCI_VENDOR_ID_BUSLOGIC 0x104B
#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER 0x1040
#define PCI_VENDOR_ID_SONY 0x104d
-
/* Winbond have two vendor IDs! See 0x10ad as well */
#define PCI_VENDOR_ID_WINBOND2 0x1050
#define PCI_DEVICE_ID_WINBOND2_89C940F 0x5a5a
#define PCI_DEVICE_ID_PROMISE_20276 0x5275
#define PCI_DEVICE_ID_PROMISE_20277 0x7275
-
#define PCI_VENDOR_ID_UMC 0x1060
#define PCI_DEVICE_ID_UMC_UM8673F 0x0101
#define PCI_DEVICE_ID_UMC_UM8886BF 0x673a
#define PCI_DEVICE_ID_MYLEX_DAC960_BA 0xBA56
#define PCI_DEVICE_ID_MYLEX_DAC960_GEM 0xB166
-
#define PCI_VENDOR_ID_APPLE 0x106b
#define PCI_DEVICE_ID_APPLE_BANDIT 0x0001
#define PCI_DEVICE_ID_APPLE_HYDRA 0x000e
#define PCI_DEVICE_ID_YAMAHA_744 0x0010
#define PCI_DEVICE_ID_YAMAHA_754 0x0012
-
#define PCI_VENDOR_ID_QLOGIC 0x1077
#define PCI_DEVICE_ID_QLOGIC_ISP10160 0x1016
#define PCI_DEVICE_ID_QLOGIC_ISP1020 0x1020
#define PCI_DEVICE_ID_CYRIX_5530_AUDIO 0x0103
#define PCI_DEVICE_ID_CYRIX_5530_VIDEO 0x0104
-
-
#define PCI_VENDOR_ID_CONTAQ 0x1080
#define PCI_DEVICE_ID_CONTAQ_82C693 0xc693
-
#define PCI_VENDOR_ID_OLICOM 0x108d
#define PCI_DEVICE_ID_OLICOM_OC2325 0x0012
#define PCI_DEVICE_ID_OLICOM_OC2183 0x0013
#define PCI_DEVICE_ID_SII_3112 0x3112
#define PCI_DEVICE_ID_SII_1210SA 0x0240
-
#define PCI_VENDOR_ID_BROOKTREE 0x109e
#define PCI_DEVICE_ID_BROOKTREE_878 0x0878
#define PCI_DEVICE_ID_BROOKTREE_879 0x0879
-
#define PCI_VENDOR_ID_SGI 0x10a9
#define PCI_DEVICE_ID_SGI_IOC3 0x0003
+#define PCI_DEVICE_ID_SGI_LITHIUM 0x1002
#define PCI_DEVICE_ID_SGI_IOC4 0x100a
-#define PCI_VENDOR_ID_SGI_LITHIUM 0x1002
-
#define PCI_VENDOR_ID_WINBOND 0x10ad
#define PCI_DEVICE_ID_WINBOND_82C105 0x0105
#define PCI_DEVICE_ID_WINBOND_83C553 0x0565
-
#define PCI_VENDOR_ID_PLX 0x10b5
#define PCI_DEVICE_ID_PLX_R685 0x1030
#define PCI_DEVICE_ID_PLX_ROMULUS 0x106a
#define PCI_DEVICE_ID_3COM_3CR990SVR97 0x9909
#define PCI_DEVICE_ID_3COM_3CR990SVR 0x990a
-
#define PCI_VENDOR_ID_AL 0x10b9
#define PCI_DEVICE_ID_AL_M1533 0x1533
#define PCI_DEVICE_ID_AL_M1535 0x1535
#define PCI_DEVICE_ID_AL_M5451 0x5451
#define PCI_DEVICE_ID_AL_M7101 0x7101
-
-
#define PCI_VENDOR_ID_NEOMAGIC 0x10c8
#define PCI_DEVICE_ID_NEOMAGIC_NM256AV_AUDIO 0x8005
#define PCI_DEVICE_ID_NEOMAGIC_NM256ZX_AUDIO 0x8006
#define PCI_DEVICE_ID_NEOMAGIC_NM256XL_PLUS_AUDIO 0x8016
-
#define PCI_VENDOR_ID_TCONRAD 0x10da
#define PCI_DEVICE_ID_TCONRAD_TOKENRING 0x0508
-
#define PCI_VENDOR_ID_NVIDIA 0x10de
#define PCI_DEVICE_ID_NVIDIA_TNT 0x0020
#define PCI_DEVICE_ID_NVIDIA_TNT2 0x0028
#define PCI_DEVICE_ID_IMS_TT128 0x9128
#define PCI_DEVICE_ID_IMS_TT3D 0x9135
-
-
-
#define PCI_VENDOR_ID_INTERG 0x10ea
#define PCI_DEVICE_ID_INTERG_1682 0x1682
#define PCI_DEVICE_ID_INTERG_2000 0x2000
#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP 0x3fc5
#define PCI_DEVICE_ID_XILINX_HAMMERFALL_DSP_MADI 0x3fc6
-
#define PCI_VENDOR_ID_INIT 0x1101
#define PCI_VENDOR_ID_CREATIVE 0x1102 /* duplicate: ECTIVA */
#define PCI_VENDOR_ID_SIEMENS 0x110A
#define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102
-
#define PCI_VENDOR_ID_VORTEX 0x1119
#define PCI_DEVICE_ID_VORTEX_GDT60x0 0x0000
#define PCI_DEVICE_ID_VORTEX_GDT6000B 0x0001
#define PCI_VENDOR_ID_EF 0x111a
#define PCI_DEVICE_ID_EF_ATM_FPGA 0x0000
#define PCI_DEVICE_ID_EF_ATM_ASIC 0x0002
-#define PCI_VENDOR_ID_EF_ATM_LANAI2 0x0003
-#define PCI_VENDOR_ID_EF_ATM_LANAIHB 0x0005
+#define PCI_DEVICE_ID_EF_ATM_LANAI2 0x0003
+#define PCI_DEVICE_ID_EF_ATM_LANAIHB 0x0005
#define PCI_VENDOR_ID_IDT 0x111d
#define PCI_DEVICE_ID_IDT_IDT77201 0x0001
#define PCI_VENDOR_ID_FORE 0x1127
#define PCI_DEVICE_ID_FORE_PCA200E 0x0300
-
#define PCI_VENDOR_ID_PHILIPS 0x1131
#define PCI_DEVICE_ID_PHILIPS_SAA7146 0x7146
#define PCI_DEVICE_ID_PHILIPS_SAA9730 0x9730
#define PCI_DEVICE_ID_ZIATECH_5550_HC 0x5550
-
#define PCI_VENDOR_ID_SYSKONNECT 0x1148
#define PCI_DEVICE_ID_SYSKONNECT_TR 0x4200
#define PCI_DEVICE_ID_SYSKONNECT_GE 0x4300
#define PCI_DEVICE_ID_SYSKONNECT_9DXX 0x4400
#define PCI_DEVICE_ID_SYSKONNECT_9MXX 0x4500
-
#define PCI_VENDOR_ID_DIGI 0x114f
#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E 0x0070
#define PCI_DEVICE_ID_DIGI_DF_M_E 0x0071
#define PCI_DEVICE_ID_NEO_2RJ45 0x00CA
#define PCI_DEVICE_ID_NEO_2RJ45PRI 0x00CB
-
#define PCI_VENDOR_ID_XIRCOM 0x115d
#define PCI_DEVICE_ID_XIRCOM_RBM56G 0x0101
#define PCI_DEVICE_ID_XIRCOM_X3201_MDM 0x0103
-
#define PCI_VENDOR_ID_SERVERWORKS 0x1166
#define PCI_DEVICE_ID_SERVERWORKS_HE 0x0008
#define PCI_DEVICE_ID_SERVERWORKS_LE 0x0009
#define PCI_DEVICE_ID_ZEITNET_1221 0x0001
#define PCI_DEVICE_ID_ZEITNET_1225 0x0002
-
#define PCI_VENDOR_ID_FUJITSU_ME 0x119e
#define PCI_DEVICE_ID_FUJITSU_FS155 0x0001
#define PCI_DEVICE_ID_FUJITSU_FS50 0x0003
#define PCI_DEVICE_ID_V3_V960 0x0001
#define PCI_DEVICE_ID_V3_V351 0x0002
-
#define PCI_VENDOR_ID_ATT 0x11c1
#define PCI_DEVICE_ID_ATT_VENUS_MODEM 0x480
-
#define PCI_VENDOR_ID_SPECIALIX 0x11cb
#define PCI_DEVICE_ID_SPECIALIX_IO8 0x2000
#define PCI_DEVICE_ID_SPECIALIX_RIO 0x8000
#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
-
#define PCI_VENDOR_ID_ANALOG_DEVICES 0x11d4
#define PCI_DEVICE_ID_AD1889JS 0x1889
-
#define PCI_DEVICE_ID_SEGA_BBA 0x1234
#define PCI_VENDOR_ID_ZORAN 0x11de
#define PCI_DEVICE_ID_ZORAN_36057 0x6057
#define PCI_DEVICE_ID_ZORAN_36120 0x6120
-
#define PCI_VENDOR_ID_COMPEX 0x11f6
#define PCI_DEVICE_ID_COMPEX_ENET100VG4 0x0112
#define PCI_DEVICE_ID_3DFX_VOODOO3 0x0005
#define PCI_DEVICE_ID_3DFX_VOODOO5 0x0009
-
-
#define PCI_VENDOR_ID_AVM 0x1244
#define PCI_DEVICE_ID_AVM_B1 0x0700
#define PCI_DEVICE_ID_AVM_C4 0x0800
#define PCI_DEVICE_ID_AVM_C2 0x1100
#define PCI_DEVICE_ID_AVM_T1 0x1200
-
#define PCI_VENDOR_ID_STALLION 0x124d
/* Allied Telesyn */
#define PCI_VENDOR_ID_SATSAGEM 0x1267
#define PCI_DEVICE_ID_SATSAGEM_NICCY 0x1016
-
#define PCI_VENDOR_ID_ENSONIQ 0x1274
#define PCI_DEVICE_ID_ENSONIQ_CT5880 0x5880
#define PCI_DEVICE_ID_ENSONIQ_ES1370 0x5000
#define PCI_VENDOR_ID_ALTEON 0x12ae
-
#define PCI_SUBVENDOR_ID_CONNECT_TECH 0x12c4
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232 0x0001
#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232 0x0002
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_4_485 0x0331
#define PCI_SUBDEVICE_ID_CONNECT_TECH_PCI_UART_8_485 0x0332
-
#define PCI_VENDOR_ID_NVIDIA_SGS 0x12d2
#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
#define PCI_DEVICE_ID_LMC_SSI 0x0005
#define PCI_DEVICE_ID_LMC_T1 0x0006
-
#define PCI_VENDOR_ID_NETGEAR 0x1385
#define PCI_DEVICE_ID_NETGEAR_GA620 0x620a
#define PCI_DEVICE_ID_OXSEMI_16PCI952 0x9521
#define PCI_DEVICE_ID_OXSEMI_16PCI952PP 0x9523
+#define PCI_VENDOR_ID_CHELSIO 0x1425
+
#define PCI_VENDOR_ID_SAMSUNG 0x144d
#define PCI_VENDOR_ID_MYRICOM 0x14c1
#define PCI_DEVICE_ID_ENE_720 0x1421
#define PCI_DEVICE_ID_ENE_722 0x1422
-#define PCI_VENDOR_ID_CHELSIO 0x1425
-
#define PCI_SUBVENDOR_ID_PERLE 0x155f
#define PCI_SUBDEVICE_ID_PCI_RAS4 0xf001
#define PCI_SUBDEVICE_ID_PCI_RAS8 0xf010
-
#define PCI_VENDOR_ID_SYBA 0x1592
#define PCI_DEVICE_ID_SYBA_2P_EPP 0x0782
#define PCI_DEVICE_ID_SYBA_1P_ECP 0x0783
#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
#define PCI_DEVICE_ID_MELLANOX_SINAI 0x6274
-#define PCI_VENDOR_ID_PDC 0x15e9
+#define PCI_VENDOR_ID_QUICKNET 0x15e2
+#define PCI_DEVICE_ID_QUICKNET_XJ 0x0500
+#define PCI_VENDOR_ID_PDC 0x15e9
#define PCI_VENDOR_ID_FARSITE 0x1619
#define PCI_DEVICE_ID_FARSITE_T2P 0x0400
#define PCI_DEVICE_ID_BCM1250_PCI 0x0001
#define PCI_DEVICE_ID_BCM1250_HT 0x0002
+#define PCI_VENDOR_ID_ATHEROS 0x168c
+
#define PCI_VENDOR_ID_NETCELL 0x169c
#define PCI_DEVICE_ID_REVOLUTION 0x0044
#define PCI_DEVICE_ID_HERC_WIN 0x5732
#define PCI_DEVICE_ID_HERC_UNI 0x5832
-
#define PCI_VENDOR_ID_SITECOM 0x182d
#define PCI_DEVICE_ID_SITECOM_DC105V2 0x3069
#define PCI_DEVICE_ID_3DLABS_PERMEDIA2 0x0007
#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V 0x0009
-
#define PCI_VENDOR_ID_AKS 0x416c
#define PCI_DEVICE_ID_AKS_ALADDINCARD 0x0100
-
-
#define PCI_VENDOR_ID_S3 0x5333
#define PCI_DEVICE_ID_S3_TRIO 0x8811
#define PCI_DEVICE_ID_S3_868 0x8880
#define PCI_VENDOR_ID_DUNORD 0x5544
#define PCI_DEVICE_ID_DUNORD_I3000 0x0001
-
#define PCI_VENDOR_ID_DCI 0x6666
#define PCI_DEVICE_ID_DCI_PCCOM4 0x0001
#define PCI_DEVICE_ID_DCI_PCCOM8 0x0002
#define PCI_DEVICE_ID_ADAPTEC2_OBSIDIAN 0x0500
#define PCI_DEVICE_ID_ADAPTEC2_SCAMP 0x0503
-
#define PCI_VENDOR_ID_HOLTEK 0x9412
#define PCI_DEVICE_ID_HOLTEK_6565 0x6565
#define PCI_DEVICE_ID_NETMOS_9845 0x9845
#define PCI_DEVICE_ID_NETMOS_9855 0x9855
+#define PCI_VENDOR_ID_3COM_2 0xa727
+
#define PCI_SUBVENDOR_ID_EXSYS 0xd84d
#define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014
#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055
#define PCI_DEVICE_ID_TIGERJET_300 0x0001
#define PCI_DEVICE_ID_TIGERJET_100 0x0002
-#define PCI_VENDOR_ID_TTTECH 0x0357
-#define PCI_DEVICE_ID_TTTECH_MC322 0x000A
-
#define PCI_VENDOR_ID_XILINX_RME 0xea60
#define PCI_DEVICE_ID_RME_DIGI32 0x9896
#define PCI_DEVICE_ID_RME_DIGI32_PRO 0x9897
#define PCI_DEVICE_ID_RME_DIGI32_8 0x9898
-
-#define PCI_VENDOR_ID_QUICKNET 0x15E2
-#define PCI_DEVICE_ID_QUICKNET_XJ 0x0500
* 1..32767 Reserved for ematches inside kernel tree
* 32768..65535 Free to use, not reliable
*/
-enum
-{
- TCF_EM_CONTAINER,
- TCF_EM_CMP,
- TCF_EM_NBYTE,
- TCF_EM_U32,
- TCF_EM_META,
- TCF_EM_TEXT,
- __TCF_EM_MAX
-};
+#define TCF_EM_CONTAINER 0
+#define TCF_EM_CMP 1
+#define TCF_EM_NBYTE 2
+#define TCF_EM_U32 3
+#define TCF_EM_META 4
+#define TCF_EM_TEXT 5
+#define TCF_EM_MAX 5
enum
{
__u8 priomap[TC_PRIO_MAX+1]; /* Map: logical priority -> PRIO band */
};
+enum
+{
+ TCA_PRIO_UNSPEC,
+ TCA_PRIO_MQ,
+ __TCA_PRIO_MAX
+};
+
+#define TCA_PRIO_MAX (__TCA_PRIO_MAX - 1)
+
/* TBF section */
struct tc_tbf_qopt
unsigned can_wakeup:1;
#ifdef CONFIG_PM
unsigned should_wakeup:1;
- pm_message_t prev_state;
- void * saved_state;
- struct device * pm_parent;
struct list_head entry;
#endif
};
-extern void device_pm_set_parent(struct device * dev, struct device * parent);
-
extern int device_power_down(pm_message_t state);
extern void device_power_up(void);
extern void device_resume(void);
RTA_FLOW,
RTA_CACHEINFO,
RTA_SESSION,
- RTA_MP_ALGO,
+ RTA_MP_ALGO, /* no longer used */
RTA_TABLE,
__RTA_MAX
};
}
extern int rtattr_parse(struct rtattr *tb[], int maxattr, struct rtattr *rta, int len);
+extern int __rtattr_parse_nested_compat(struct rtattr *tb[], int maxattr,
+ struct rtattr *rta, int len);
#define rtattr_parse_nested(tb, max, rta) \
rtattr_parse((tb), (max), RTA_DATA((rta)), RTA_PAYLOAD((rta)))
+#define rtattr_parse_nested_compat(tb, max, rta, data, len) \
+({ data = RTA_PAYLOAD(rta) >= len ? RTA_DATA(rta) : NULL; \
+ __rtattr_parse_nested_compat(tb, max, rta, len); })
+
extern int rtnetlink_send(struct sk_buff *skb, u32 pid, u32 group, int echo);
extern int rtnl_unicast(struct sk_buff *skb, u32 pid);
extern int rtnl_notify(struct sk_buff *skb, u32 pid, u32 group,
({ (start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
(skb)->len; })
+#define RTA_NEST_COMPAT(skb, type, attrlen, data) \
+({ struct rtattr *__start = (struct rtattr *)skb_tail_pointer(skb); \
+ RTA_PUT(skb, type, attrlen, data); \
+ RTA_NEST(skb, type); \
+ __start; })
+
+#define RTA_NEST_COMPAT_END(skb, start) \
+({ struct rtattr *__nest = (void *)(start) + NLMSG_ALIGN((start)->rta_len); \
+ (start)->rta_len = skb_tail_pointer(skb) - (unsigned char *)(start); \
+ RTA_NEST_END(skb, __nest); \
+ (skb)->len; })
+
#define RTA_NEST_CANCEL(skb, start) \
({ if (start) \
skb_trim(skb, (unsigned char *) (start) - (skb)->data); \
struct screen_info {
u8 orig_x; /* 0x00 */
u8 orig_y; /* 0x01 */
- u16 dontuse1; /* 0x02 -- EXT_MEM_K sits here */
+ u16 ext_mem_k; /* 0x02 */
u16 orig_video_page; /* 0x04 */
u8 orig_video_mode; /* 0x06 */
u8 orig_video_cols; /* 0x07 */
u16 lfb_depth; /* 0x16 */
u32 lfb_base; /* 0x18 */
u32 lfb_size; /* 0x1c */
- u16 dontuse2, dontuse3; /* 0x20 -- CL_MAGIC and CL_OFFSET here */
+ u16 cl_magic, cl_offset; /* 0x20 */
u16 lfb_linelength; /* 0x24 */
u8 red_size; /* 0x26 */
u8 red_pos; /* 0x27 */
u16 pages; /* 0x32 */
u16 vesa_attributes; /* 0x34 */
u32 capabilities; /* 0x36 */
- /* 0x3a -- 0x3b reserved for future expansion */
- /* 0x3c -- 0x3f micro stack for relocatable kernels */
-};
+ u8 _reserved[6]; /* 0x3a */
+} __attribute__((packed));
extern struct screen_info screen_info;
#define SERIO_PENMOUNT 0x31
#define SERIO_TOUCHRIGHT 0x32
#define SERIO_TOUCHWIN 0x33
+#define SERIO_TAOSEVM 0x34
#endif
* is able to produce some skb->csum, it MUST use COMPLETE,
* not UNNECESSARY.
*
+ * PARTIAL: identical to the case for output below. This may occur
+ * on a packet received directly from another Linux OS, e.g.,
+ * a virtualised Linux kernel on the same host. The packet can
+ * be treated in the same way as UNNECESSARY except that on
+ * output (i.e., forwarding) the checksum must be filled in
+ * by the OS or the hardware.
+ *
* B. Checksumming on output.
*
* NONE: skb is checksummed by protocol or csum is not required.
*
* PARTIAL: device is required to csum packet as seen by hard_start_xmit
- * from skb->transport_header to the end and to record the checksum
- * at skb->transport_header + skb->csum.
+ * from skb->csum_start to the end and to record the checksum
+ * at skb->csum_start + skb->csum_offset.
*
* Device must show its capabilities in dev->features, set
* at device setup time.
* TCP/UDP over IPv4. Sigh. Vendors like this
* way by an unknown reason. Though, see comment above
* about CHECKSUM_UNNECESSARY. 8)
+ * NETIF_F_IPV6_CSUM about as dumb as the last one but does IPv6 instead.
*
* Any questions? No questions, good. --ANK
*/
/* We divide dataref into two halves. The higher 16 bits hold references
* to the payload part of skb->data. The lower 16 bits hold references to
- * the entire skb->data. It is up to the users of the skb to agree on
- * where the payload starts.
+ * the entire skb->data. A clone of a headerless skb holds the length of
+ * the header in skb->hdr_len.
*
* All users must obey the rule that the skb->data reference count must be
* greater than or equal to the payload reference count.
* @sk: Socket we are owned by
* @tstamp: Time we arrived
* @dev: Device we arrived on/are leaving by
- * @iif: ifindex of device we arrived on
* @transport_header: Transport layer header
* @network_header: Network layer header
* @mac_header: Link layer header
* @len: Length of actual data
* @data_len: Data length
* @mac_len: Length of link layer header
+ * @hdr_len: writable header length of cloned skb
* @csum: Checksum (must include start/offset pair)
* @csum_start: Offset from skb->head where checksumming should start
* @csum_offset: Offset from csum_start where checksum should be stored
* @mark: Generic packet mark
* @nfct: Associated connection, if any
* @ipvs_property: skbuff is owned by ipvs
+ * @nf_trace: netfilter packet trace flag
* @nfctinfo: Relationship of this skb to the connection
* @nfct_reasm: netfilter conntrack re-assembly pointer
* @nf_bridge: Saved data about a bridged frame - see br_netfilter.c
+ * @iif: ifindex of device we arrived on
+ * @queue_mapping: Queue mapping for multiqueue devices
* @tc_index: Traffic control index
* @tc_verd: traffic control verdict
* @dma_cookie: a cookie to one of several possible DMA operations
struct sock *sk;
ktime_t tstamp;
struct net_device *dev;
- int iif;
- /* 4 byte hole on 64 bit*/
struct dst_entry *dst;
struct sec_path *sp;
char cb[48];
unsigned int len,
- data_len,
- mac_len;
+ data_len;
+ __u16 mac_len,
+ hdr_len;
union {
__wsum csum;
struct {
nfctinfo:3;
__u8 pkt_type:3,
fclone:2,
- ipvs_property:1;
+ ipvs_property:1,
+ nf_trace:1;
__be16 protocol;
void (*destructor)(struct sk_buff *skb);
#ifdef CONFIG_BRIDGE_NETFILTER
struct nf_bridge_info *nf_bridge;
#endif
+
+ int iif;
+ __u16 queue_mapping;
+
#ifdef CONFIG_NET_SCHED
__u16 tc_index; /* traffic control index */
#ifdef CONFIG_NET_CLS_ACT
__u16 tc_verd; /* traffic control verdict */
#endif
#endif
+ /* 2 byte hole */
+
#ifdef CONFIG_NET_DMA
dma_cookie_t dma_cookie;
#endif
return __netdev_alloc_skb(dev, length, GFP_ATOMIC);
}
+/**
+ * skb_clone_writable - is the header of a clone writable
+ * @skb: buffer to check
+ * @len: length up to which to write
+ *
+ * Returns true if modifying the header part of the cloned buffer
+ * does not requires the data to be copied.
+ */
+static inline int skb_clone_writable(struct sk_buff *skb, int len)
+{
+ return !skb_header_cloned(skb) &&
+ skb_headroom(skb) + len <= skb->hdr_len;
+}
+
/**
* skb_cow - copy header of skb when it is required
* @skb: buffer to cow
{ }
#endif
+static inline void skb_set_queue_mapping(struct sk_buff *skb, u16 queue_mapping)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ skb->queue_mapping = queue_mapping;
+#endif
+}
+
+static inline void skb_copy_queue_mapping(struct sk_buff *to, const struct sk_buff *from)
+{
+#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+ to->queue_mapping = from->queue_mapping;
+#endif
+}
+
static inline int skb_is_gso(const struct sk_buff *skb)
{
return skb_shinfo(skb)->gso_size;
#define SOL_NETLINK 270
#define SOL_TIPC 271
#define SOL_RXRPC 272
+#define SOL_PPPOL2TP 273
/* IPX options */
#define IPX_TYPE 1
#define _SYSDEV_ATTR(_name,_mode,_show,_store) \
{ \
- .attr = { .name = __stringify(_name), .mode = _mode, \
- .owner = THIS_MODULE }, \
+ .attr = { .name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
}
struct module;
struct nameidata;
struct dentry;
+struct sysfs_dirent;
+/* FIXME
+ * The *owner field is no longer used, but leave around
+ * until the tree gets cleaned up fully.
+ */
struct attribute {
const char * name;
- struct module * owner;
+ struct module * owner;
mode_t mode;
};
*/
#define __ATTR(_name,_mode,_show,_store) { \
- .attr = {.name = __stringify(_name), .mode = _mode, .owner = THIS_MODULE }, \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
}
#define __ATTR_RO(_name) { \
- .attr = { .name = __stringify(_name), .mode = 0444, .owner = THIS_MODULE }, \
- .show = _name##_show, \
+ .attr = { .name = __stringify(_name), .mode = 0444 }, \
+ .show = _name##_show, \
}
#define __ATTR_NULL { .attr = { .name = NULL } }
struct attribute attr;
size_t size;
void *private;
- ssize_t (*read)(struct kobject *, char *, loff_t, size_t);
- ssize_t (*write)(struct kobject *, char *, loff_t, size_t);
+ ssize_t (*read)(struct kobject *, struct bin_attribute *,
+ char *, loff_t, size_t);
+ ssize_t (*write)(struct kobject *, struct bin_attribute *,
+ char *, loff_t, size_t);
int (*mmap)(struct kobject *, struct bin_attribute *attr,
struct vm_area_struct *vma);
};
ssize_t (*store)(struct kobject *,struct attribute *,const char *, size_t);
};
+#define SYSFS_TYPE_MASK 0x00ff
#define SYSFS_ROOT 0x0001
#define SYSFS_DIR 0x0002
#define SYSFS_KOBJ_ATTR 0x0004
#define SYSFS_KOBJ_BIN_ATTR 0x0008
#define SYSFS_KOBJ_LINK 0x0020
-#define SYSFS_NOT_PINNED (SYSFS_KOBJ_ATTR | SYSFS_KOBJ_BIN_ATTR | SYSFS_KOBJ_LINK)
+#define SYSFS_COPY_NAME (SYSFS_DIR | SYSFS_KOBJ_LINK)
+
+#define SYSFS_FLAG_MASK ~SYSFS_TYPE_MASK
+#define SYSFS_FLAG_REMOVED 0x0100
#ifdef CONFIG_SYSFS
void (*func)(void *), void *data, struct module *owner);
extern int __must_check
-sysfs_create_dir(struct kobject *, struct dentry *);
+sysfs_create_dir(struct kobject *kobj, struct sysfs_dirent *shadow_parent_sd);
extern void
sysfs_remove_dir(struct kobject *);
extern int __must_check
-sysfs_rename_dir(struct kobject *, struct dentry *, const char *new_name);
+sysfs_rename_dir(struct kobject *kobj, struct sysfs_dirent *new_parent_sd,
+ const char *new_name);
extern int __must_check
sysfs_move_dir(struct kobject *, struct kobject *);
extern int sysfs_make_shadowed_dir(struct kobject *kobj,
void * (*follow_link)(struct dentry *, struct nameidata *));
-extern struct dentry *sysfs_create_shadow_dir(struct kobject *kobj);
-extern void sysfs_remove_shadow_dir(struct dentry *dir);
+extern struct sysfs_dirent *sysfs_create_shadow_dir(struct kobject *kobj);
+extern void sysfs_remove_shadow_dir(struct sysfs_dirent *shadow_sd);
extern int __must_check sysfs_init(void);
return -ENOSYS;
}
-static inline int sysfs_create_dir(struct kobject * k, struct dentry *shadow)
+static inline int sysfs_create_dir(struct kobject *kobj,
+ struct sysfs_dirent *shadow_parent_sd)
{
return 0;
}
;
}
-static inline int sysfs_rename_dir(struct kobject * k,
- struct dentry *new_parent,
- const char *new_name)
+static inline int sysfs_rename_dir(struct kobject *kobj,
+ struct sysfs_dirent *new_parent_sd,
+ const char *new_name)
{
return 0;
}
/* UDP encapsulation types */
#define UDP_ENCAP_ESPINUDP_NON_IKE 1 /* draft-ietf-ipsec-nat-t-ike-00/01 */
#define UDP_ENCAP_ESPINUDP 2 /* draft-ietf-ipsec-udp-encaps-06 */
+#define UDP_ENCAP_L2TPINUDP 3 /* rfc2661 */
#ifdef __KERNEL__
#include <linux/types.h>
#define UDPLITE_SEND_CC 0x2 /* set via udplite setsockopt */
#define UDPLITE_RECV_CC 0x4 /* set via udplite setsocktopt */
__u8 pcflag; /* marks socket as UDP-Lite if > 0 */
+ __u8 unused[3];
+ /*
+ * For encapsulation sockets.
+ */
+ int (*encap_rcv)(struct sock *sk, struct sk_buff *skb);
};
static inline struct udp_sock *udp_sk(const struct sock *sk)
struct gnet_stats_basic tcfc_bstats;
struct gnet_stats_queue tcfc_qstats;
struct gnet_stats_rate_est tcfc_rate_est;
- spinlock_t *tcfc_stats_lock;
spinlock_t tcfc_lock;
};
#define tcf_next common.tcfc_next
#define tcf_bstats common.tcfc_bstats
#define tcf_qstats common.tcfc_qstats
#define tcf_rate_est common.tcfc_rate_est
-#define tcf_stats_lock common.tcfc_stats_lock
#define tcf_lock common.tcfc_lock
struct tcf_police {
extern int ipv6_chk_addr(struct in6_addr *addr,
struct net_device *dev,
int strict);
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
extern int ipv6_chk_home_addr(struct in6_addr *addr);
#endif
extern struct inet6_ifaddr * ipv6_get_ifaddr(struct in6_addr *addr,
struct mutex readlock;
struct sock *peer;
struct sock *other;
- struct sock *gc_tree;
+ struct list_head link;
atomic_t inflight;
spinlock_t lock;
+ unsigned int gc_candidate : 1;
wait_queue_head_t peer_wait;
};
#define unix_sk(__sk) ((struct unix_sock *)__sk)
#define HCI_IDLE_TIMEOUT (6000) /* 6 seconds */
#define HCI_INIT_TIMEOUT (10000) /* 10 seconds */
-/* HCI Packet types */
+/* HCI data types */
#define HCI_COMMAND_PKT 0x01
#define HCI_ACLDATA_PKT 0x02
#define HCI_SCODATA_PKT 0x03
#define HCI_EVENT_PKT 0x04
#define HCI_VENDOR_PKT 0xff
-/* HCI Packet types */
+/* HCI packet types */
#define HCI_DM1 0x0008
#define HCI_DM3 0x0400
#define HCI_DM5 0x4000
#define SCO_PTYPE_MASK (HCI_HV1 | HCI_HV2 | HCI_HV3)
#define ACL_PTYPE_MASK (~SCO_PTYPE_MASK)
+/* eSCO packet types */
+#define ESCO_HV1 0x0001
+#define ESCO_HV2 0x0002
+#define ESCO_HV3 0x0004
+#define ESCO_EV3 0x0008
+#define ESCO_EV4 0x0010
+#define ESCO_EV5 0x0020
+
/* ACL flags */
#define ACL_CONT 0x01
#define ACL_START 0x02
/* Baseband links */
#define SCO_LINK 0x00
#define ACL_LINK 0x01
+#define ESCO_LINK 0x02
/* LMP features */
#define LMP_3SLOT 0x01
#define LMP_PSCHEME 0x02
#define LMP_PCONTROL 0x04
+#define LMP_ESCO 0x80
+
+#define LMP_EV4 0x01
+#define LMP_EV5 0x02
+
#define LMP_SNIFF_SUBR 0x02
/* Connection modes */
__u16 voice_setting;
__u16 pkt_type;
+ __u16 esco_type;
__u16 link_policy;
__u16 link_mode;
struct sk_buff_head cmd_q;
struct sk_buff *sent_cmd;
+ struct sk_buff *reassembly[3];
struct semaphore req_lock;
wait_queue_head_t req_wait_q;
return 0;
}
+int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count);
+
int hci_register_sysfs(struct hci_dev *hdev);
void hci_unregister_sysfs(struct hci_dev *hdev);
void hci_conn_add_sysfs(struct hci_conn *conn);
#define lmp_encrypt_capable(dev) ((dev)->features[0] & LMP_ENCRYPT)
#define lmp_sniff_capable(dev) ((dev)->features[0] & LMP_SNIFF)
#define lmp_sniffsubr_capable(dev) ((dev)->features[5] & LMP_SNIFF_SUBR)
+#define lmp_esco_capable(dev) ((dev)->features[3] & LMP_ESCO)
/* ----- HCI protocols ----- */
struct hci_proto {
#define RFCOMM_RELEASE_ONHUP 1
#define RFCOMM_HANGUP_NOW 2
#define RFCOMM_TTY_ATTACHED 3
+#define RFCOMM_TTY_RELEASED 4
struct rfcomm_dev_req {
s16 dev_id;
#include <linux/dn.h>
#include <net/sock.h>
-#include <net/tcp.h>
#include <asm/byteorder.h>
#define dn_ntohs(x) le16_to_cpu(x)
#define DST_NOXFRM 2
#define DST_NOPOLICY 4
#define DST_NOHASH 8
-#define DST_BALANCED 0x10
unsigned long expires;
unsigned short header_len; /* more space at head required */
__be32 spi;
-#ifdef CONFIG_IPV6_MIP6
struct {
__u8 type;
} mht;
-#endif
} uli_u;
#define fl_ip_sport uli_u.ports.sport
#define fl_ip_dport uli_u.ports.dport
#define fl_icmp_type uli_u.icmpt.type
#define fl_icmp_code uli_u.icmpt.code
#define fl_ipsec_spi uli_u.spi
-#ifdef CONFIG_IPV6_MIP6
#define fl_mh_type uli_u.mht.type
-#endif
__u32 secid; /* used by xfrm; see secid.txt */
} __attribute__((__aligned__(BITS_PER_LONG/8)));
int fc_mx_len;
int fc_mp_len;
u32 fc_flow;
- u32 fc_mp_alg;
u32 fc_nlflags;
struct nl_info fc_nlinfo;
};
int fib_nhs;
#ifdef CONFIG_IP_ROUTE_MULTIPATH
int fib_power;
-#endif
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- u32 fib_mp_alg;
#endif
struct fib_nh fib_nh[0];
#define fib_dev fib_nh[0].nh_dev
unsigned char nh_sel;
unsigned char type;
unsigned char scope;
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- __be32 network;
- __be32 netmask;
-#endif
struct fib_info *fi;
#ifdef CONFIG_IP_MULTIPLE_TABLES
struct fib_rule *r;
#define FIB_RES_DEV(res) (FIB_RES_NH(res).nh_dev)
#define FIB_RES_OIF(res) (FIB_RES_NH(res).nh_oif)
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
-#define FIB_RES_NETWORK(res) ((res).network)
-#define FIB_RES_NETMASK(res) ((res).netmask)
-#else /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
-#define FIB_RES_NETWORK(res) (0)
-#define FIB_RES_NETMASK(res) (0)
-#endif /* CONFIG_IP_ROUTE_MULTIPATH_WRANDOM */
-
struct fib_table {
struct hlist_node tb_hlist;
u32 tb_id;
+++ /dev/null
-/* ip_mp_alg.h: IPV4 multipath algorithm support.
- *
- * Copyright (C) 2004, 2005 Einar Lueck <elueck@de.ibm.com>
- * Copyright (C) 2005 David S. Miller <davem@davemloft.net>
- */
-
-#ifndef _NET_IP_MP_ALG_H
-#define _NET_IP_MP_ALG_H
-
-#include <linux/ip_mp_alg.h>
-#include <net/flow.h>
-#include <net/route.h>
-
-struct fib_nh;
-
-struct ip_mp_alg_ops {
- void (*mp_alg_select_route)(const struct flowi *flp,
- struct rtable *rth, struct rtable **rp);
- void (*mp_alg_flush)(void);
- void (*mp_alg_set_nhinfo)(__be32 network, __be32 netmask,
- unsigned char prefixlen,
- const struct fib_nh *nh);
- void (*mp_alg_remove)(struct rtable *rth);
-};
-
-extern int multipath_alg_register(struct ip_mp_alg_ops *, enum ip_mp_alg);
-extern void multipath_alg_unregister(struct ip_mp_alg_ops *, enum ip_mp_alg);
-
-extern struct ip_mp_alg_ops *ip_mp_alg_table[];
-
-static inline int multipath_select_route(const struct flowi *flp,
- struct rtable *rth,
- struct rtable **rp)
-{
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- struct ip_mp_alg_ops *ops = ip_mp_alg_table[rth->rt_multipath_alg];
-
- /* mp_alg_select_route _MUST_ be implemented */
- if (ops && (rth->u.dst.flags & DST_BALANCED)) {
- ops->mp_alg_select_route(flp, rth, rp);
- return 1;
- }
-#endif
- return 0;
-}
-
-static inline void multipath_flush(void)
-{
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- int i;
-
- for (i = IP_MP_ALG_NONE; i <= IP_MP_ALG_MAX; i++) {
- struct ip_mp_alg_ops *ops = ip_mp_alg_table[i];
-
- if (ops && ops->mp_alg_flush)
- ops->mp_alg_flush();
- }
-#endif
-}
-
-static inline void multipath_set_nhinfo(struct rtable *rth,
- __be32 network, __be32 netmask,
- unsigned char prefixlen,
- const struct fib_nh *nh)
-{
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- struct ip_mp_alg_ops *ops = ip_mp_alg_table[rth->rt_multipath_alg];
-
- if (ops && ops->mp_alg_set_nhinfo)
- ops->mp_alg_set_nhinfo(network, netmask, prefixlen, nh);
-#endif
-}
-
-static inline void multipath_remove(struct rtable *rth)
-{
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- struct ip_mp_alg_ops *ops = ip_mp_alg_table[rth->rt_multipath_alg];
-
- if (ops && ops->mp_alg_remove &&
- (rth->u.dst.flags & DST_BALANCED))
- ops->mp_alg_remove(rth);
-#endif
-}
-
-static inline int multipath_comparekeys(const struct flowi *flp1,
- const struct flowi *flp2)
-{
- return flp1->fl4_dst == flp2->fl4_dst &&
- flp1->fl4_src == flp2->fl4_src &&
- flp1->oif == flp2->oif &&
- flp1->mark == flp2->mark &&
- !((flp1->fl4_tos ^ flp2->fl4_tos) &
- (IPTOS_RT_MASK | RTO_ONLINK));
-}
-
-#endif /* _NET_IP_MP_ALG_H */
extern int ipv6_find_tlv(struct sk_buff *skb, int offset, int type);
-extern struct ipv6_txoptions * ipv6_invert_rthdr(struct sock *sk,
- struct ipv6_rt_hdr *hdr);
-
-
/*
* socket options (ipv6_sockglue.c)
*/
extern int irsock_init(void);
extern void irsock_cleanup(void);
+extern int irda_nl_register(void);
+extern void irda_nl_unregister(void);
+
extern int irlap_driver_rcv(struct sk_buff *skb, struct net_device *dev,
struct packet_type *ptype,
struct net_device *orig_dev);
int xbofs_delay; /* Nr of XBOF's used to MTT */
int bofs_count; /* Negotiated extra BOFs */
int next_bofs; /* Negotiated extra BOFs after next frame */
+
+ int mode; /* IrLAP mode (primary, secondary or monitor) */
};
/*
#define IP6_MH_TYPE_BERROR 7 /* Binding Error */
#define IP6_MH_TYPE_MAX IP6_MH_TYPE_BERROR
-extern int mip6_init(void);
-extern void mip6_fini(void);
-extern int mip6_mh_filter(struct sock *sk, struct sk_buff *skb);
-
#endif
#ifndef _NF_CONNTRACK_IPV4_H
#define _NF_CONNTRACK_IPV4_H
-#ifdef CONFIG_NF_NAT_NEEDED
-#include <net/netfilter/nf_nat.h>
-#include <linux/netfilter/nf_conntrack_pptp.h>
-
-/* per conntrack: nat application helper private data */
-union nf_conntrack_nat_help {
- /* insert nat helper private data here */
- struct nf_nat_pptp nat_pptp_info;
-};
-
-struct nf_conn_nat {
- struct nf_nat_info info;
- union nf_conntrack_nat_help help;
-#if defined(CONFIG_IP_NF_TARGET_MASQUERADE) || \
- defined(CONFIG_IP_NF_TARGET_MASQUERADE_MODULE)
- int masq_index;
-#endif
-};
-#endif /* CONFIG_NF_NAT_NEEDED */
-
/* Returns new sk_buff, or NULL */
-struct sk_buff *
-nf_ct_ipv4_ct_gather_frags(struct sk_buff *skb);
+struct sk_buff *nf_ct_ipv4_ct_gather_frags(struct sk_buff *skb);
extern struct nf_conntrack_l4proto nf_conntrack_l4proto_tcp4;
extern struct nf_conntrack_l4proto nf_conntrack_l4proto_udp4;
union nf_conntrack_help help;
+ struct hlist_head expectations;
+
/* Current number of expected connections */
unsigned int expecting;
};
/* Unique ID that identifies this conntrack*/
unsigned int id;
- /* features - nat, helper, ... used by allocating system */
- u_int32_t features;
-
#if defined(CONFIG_NF_CONNTRACK_MARK)
u_int32_t mark;
#endif
/* Storage reserved for other modules: */
union nf_conntrack_proto proto;
- /* features dynamically at the end: helper, nat (both optional) */
- char data[0];
+ /* Extensions */
+ struct nf_ct_ext *ext;
};
static inline struct nf_conn *
extern int nf_ct_l3proto_try_module_get(unsigned short l3proto);
extern void nf_ct_l3proto_module_put(unsigned short l3proto);
+extern struct hlist_head *nf_ct_alloc_hashtable(int *sizep, int *vmalloced);
+extern void nf_ct_free_hashtable(struct hlist_head *hash, int vmalloced,
+ int size);
+
extern struct nf_conntrack_tuple_hash *
__nf_conntrack_find(const struct nf_conntrack_tuple *tuple,
const struct nf_conn *ignored_conntrack);
struct nf_conn *conntrack,
int dir);
-/* Call me when a conntrack is destroyed. */
-extern void (*nf_conntrack_destroyed)(struct nf_conn *conntrack);
-
/* Fake conntrack entry for untracked connections */
extern struct nf_conn nf_conntrack_untracked;
local_bh_enable(); \
} while (0)
-/* no helper, no nat */
-#define NF_CT_F_BASIC 0
-/* for helper */
-#define NF_CT_F_HELP 1
-/* for nat. */
-#define NF_CT_F_NAT 2
-#define NF_CT_F_NUM 4
-
extern int
nf_conntrack_register_cache(u_int32_t features, const char *name, size_t size);
extern void
nf_conntrack_unregister_cache(u_int32_t features);
-/* valid combinations:
- * basic: nf_conn, nf_conn .. nf_conn_help
- * nat: nf_conn .. nf_conn_nat, nf_conn .. nf_conn_nat .. nf_conn help
- */
-#ifdef CONFIG_NF_NAT_NEEDED
-static inline struct nf_conn_nat *nfct_nat(const struct nf_conn *ct)
-{
- unsigned int offset = sizeof(struct nf_conn);
-
- if (!(ct->features & NF_CT_F_NAT))
- return NULL;
-
- offset = ALIGN(offset, __alignof__(struct nf_conn_nat));
- return (struct nf_conn_nat *) ((void *)ct + offset);
-}
-
-static inline struct nf_conn_help *nfct_help(const struct nf_conn *ct)
-{
- unsigned int offset = sizeof(struct nf_conn);
-
- if (!(ct->features & NF_CT_F_HELP))
- return NULL;
- if (ct->features & NF_CT_F_NAT) {
- offset = ALIGN(offset, __alignof__(struct nf_conn_nat));
- offset += sizeof(struct nf_conn_nat);
- }
-
- offset = ALIGN(offset, __alignof__(struct nf_conn_help));
- return (struct nf_conn_help *) ((void *)ct + offset);
-}
-#else /* No NAT */
-static inline struct nf_conn_help *nfct_help(const struct nf_conn *ct)
-{
- unsigned int offset = sizeof(struct nf_conn);
-
- if (!(ct->features & NF_CT_F_HELP))
- return NULL;
-
- offset = ALIGN(offset, __alignof__(struct nf_conn_help));
- return (struct nf_conn_help *) ((void *)ct + offset);
-}
-#endif /* CONFIG_NF_NAT_NEEDED */
#endif /* __KERNEL__ */
#endif /* _NF_CONNTRACK_H */
extern int nf_conntrack_proto_init(void);
extern void nf_conntrack_proto_fini(void);
+extern int nf_conntrack_helper_init(void);
+extern void nf_conntrack_helper_fini(void);
+
struct nf_conntrack_l3proto;
extern struct nf_conntrack_l3proto *nf_ct_find_l3proto(u_int16_t pf);
/* Like above, but you already have conntrack read lock. */
/* Find a connection corresponding to a tuple. */
extern struct nf_conntrack_tuple_hash *
-nf_conntrack_find_get(const struct nf_conntrack_tuple *tuple,
- const struct nf_conn *ignored_conntrack);
+nf_conntrack_find_get(const struct nf_conntrack_tuple *tuple);
extern int __nf_conntrack_confirm(struct sk_buff **pskb);
struct nf_conntrack_l3proto *l3proto,
struct nf_conntrack_l4proto *proto);
-extern struct list_head *nf_conntrack_hash;
-extern struct list_head nf_conntrack_expect_list;
+extern struct hlist_head *nf_conntrack_hash;
extern rwlock_t nf_conntrack_lock ;
-extern struct list_head unconfirmed;
+extern struct hlist_head unconfirmed;
#endif /* _NF_CONNTRACK_CORE_H */
atomic_notifier_call_chain(&nf_conntrack_chain, event, ct);
}
-extern struct atomic_notifier_head nf_conntrack_expect_chain;
-extern int nf_conntrack_expect_register_notifier(struct notifier_block *nb);
-extern int nf_conntrack_expect_unregister_notifier(struct notifier_block *nb);
+extern struct atomic_notifier_head nf_ct_expect_chain;
+extern int nf_ct_expect_register_notifier(struct notifier_block *nb);
+extern int nf_ct_expect_unregister_notifier(struct notifier_block *nb);
static inline void
-nf_conntrack_expect_event(enum ip_conntrack_expect_events event,
- struct nf_conntrack_expect *exp)
+nf_ct_expect_event(enum ip_conntrack_expect_events event,
+ struct nf_conntrack_expect *exp)
{
- atomic_notifier_call_chain(&nf_conntrack_expect_chain, event, exp);
+ atomic_notifier_call_chain(&nf_ct_expect_chain, event, exp);
}
#else /* CONFIG_NF_CONNTRACK_EVENTS */
static inline void nf_conntrack_event(enum ip_conntrack_events event,
struct nf_conn *ct) {}
static inline void nf_ct_deliver_cached_events(const struct nf_conn *ct) {}
-static inline void
-nf_conntrack_expect_event(enum ip_conntrack_expect_events event,
- struct nf_conntrack_expect *exp) {}
+static inline void nf_ct_expect_event(enum ip_conntrack_expect_events event,
+ struct nf_conntrack_expect *exp) {}
static inline void nf_ct_event_cache_flush(void) {}
#endif /* CONFIG_NF_CONNTRACK_EVENTS */
#define _NF_CONNTRACK_EXPECT_H
#include <net/netfilter/nf_conntrack.h>
-extern struct list_head nf_conntrack_expect_list;
-extern struct kmem_cache *nf_conntrack_expect_cachep;
-extern const struct file_operations exp_file_ops;
+extern struct hlist_head *nf_ct_expect_hash;
+extern unsigned int nf_ct_expect_hsize;
+extern unsigned int nf_ct_expect_max;
struct nf_conntrack_expect
{
- /* Internal linked list (global expectation list) */
- struct list_head list;
+ /* Conntrack expectation list member */
+ struct hlist_node lnode;
+
+ /* Hash member */
+ struct hlist_node hnode;
/* We expect this tuple, with the following mask */
- struct nf_conntrack_tuple tuple, mask;
+ struct nf_conntrack_tuple tuple;
+ struct nf_conntrack_tuple_mask mask;
/* Function to call after setup and insertion */
void (*expectfn)(struct nf_conn *new,
#define NF_CT_EXPECT_PERMANENT 0x1
+int nf_conntrack_expect_init(void);
+void nf_conntrack_expect_fini(void);
struct nf_conntrack_expect *
-__nf_conntrack_expect_find(const struct nf_conntrack_tuple *tuple);
+__nf_ct_expect_find(const struct nf_conntrack_tuple *tuple);
struct nf_conntrack_expect *
-nf_conntrack_expect_find_get(const struct nf_conntrack_tuple *tuple);
+nf_ct_expect_find_get(const struct nf_conntrack_tuple *tuple);
struct nf_conntrack_expect *
-find_expectation(const struct nf_conntrack_tuple *tuple);
+nf_ct_find_expectation(const struct nf_conntrack_tuple *tuple);
void nf_ct_unlink_expect(struct nf_conntrack_expect *exp);
void nf_ct_remove_expectations(struct nf_conn *ct);
-void nf_conntrack_unexpect_related(struct nf_conntrack_expect *exp);
+void nf_ct_unexpect_related(struct nf_conntrack_expect *exp);
/* Allocate space for an expectation: this is mandatory before calling
- nf_conntrack_expect_related. You will have to call put afterwards. */
-struct nf_conntrack_expect *nf_conntrack_expect_alloc(struct nf_conn *me);
-void nf_conntrack_expect_init(struct nf_conntrack_expect *, int,
- union nf_conntrack_address *,
- union nf_conntrack_address *,
- u_int8_t, __be16 *, __be16 *);
-void nf_conntrack_expect_put(struct nf_conntrack_expect *exp);
-int nf_conntrack_expect_related(struct nf_conntrack_expect *expect);
+ nf_ct_expect_related. You will have to call put afterwards. */
+struct nf_conntrack_expect *nf_ct_expect_alloc(struct nf_conn *me);
+void nf_ct_expect_init(struct nf_conntrack_expect *, int,
+ union nf_conntrack_address *,
+ union nf_conntrack_address *,
+ u_int8_t, __be16 *, __be16 *);
+void nf_ct_expect_put(struct nf_conntrack_expect *exp);
+int nf_ct_expect_related(struct nf_conntrack_expect *expect);
#endif /*_NF_CONNTRACK_EXPECT_H*/
--- /dev/null
+#ifndef _NF_CONNTRACK_EXTEND_H
+#define _NF_CONNTRACK_EXTEND_H
+
+#include <net/netfilter/nf_conntrack.h>
+
+enum nf_ct_ext_id
+{
+ NF_CT_EXT_HELPER,
+ NF_CT_EXT_NAT,
+ NF_CT_EXT_NUM,
+};
+
+#define NF_CT_EXT_HELPER_TYPE struct nf_conn_help
+#define NF_CT_EXT_NAT_TYPE struct nf_conn_nat
+
+/* Extensions: optional stuff which isn't permanently in struct. */
+struct nf_ct_ext {
+ u8 offset[NF_CT_EXT_NUM];
+ u8 len;
+ u8 real_len;
+ char data[0];
+};
+
+static inline int nf_ct_ext_exist(const struct nf_conn *ct, u8 id)
+{
+ return (ct->ext && ct->ext->offset[id]);
+}
+
+static inline void *__nf_ct_ext_find(const struct nf_conn *ct, u8 id)
+{
+ if (!nf_ct_ext_exist(ct, id))
+ return NULL;
+
+ return (void *)ct->ext + ct->ext->offset[id];
+}
+#define nf_ct_ext_find(ext, id) \
+ ((id##_TYPE *)__nf_ct_ext_find((ext), (id)))
+
+/* Destroy all relationships */
+extern void __nf_ct_ext_destroy(struct nf_conn *ct);
+static inline void nf_ct_ext_destroy(struct nf_conn *ct)
+{
+ if (ct->ext)
+ __nf_ct_ext_destroy(ct);
+}
+
+/* Free operation. If you want to free a object referred from private area,
+ * please implement __nf_ct_ext_free() and call it.
+ */
+static inline void nf_ct_ext_free(struct nf_conn *ct)
+{
+ if (ct->ext)
+ kfree(ct->ext);
+}
+
+/* Add this type, returns pointer to data or NULL. */
+void *
+__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp);
+#define nf_ct_ext_add(ct, id, gfp) \
+ ((id##_TYPE *)__nf_ct_ext_add((ct), (id), (gfp)))
+
+#define NF_CT_EXT_F_PREALLOC 0x0001
+
+struct nf_ct_ext_type
+{
+ /* Destroys relationships (can be NULL). */
+ void (*destroy)(struct nf_conn *ct);
+ /* Called when realloacted (can be NULL).
+ Contents has already been moved. */
+ void (*move)(struct nf_conn *ct, void *old);
+
+ enum nf_ct_ext_id id;
+
+ unsigned int flags;
+
+ /* Length and min alignment. */
+ u8 len;
+ u8 align;
+ /* initial size of nf_ct_ext. */
+ u8 alloc_size;
+};
+
+int nf_ct_extend_register(struct nf_ct_ext_type *type);
+void nf_ct_extend_unregister(struct nf_ct_ext_type *type);
+#endif /* _NF_CONNTRACK_EXTEND_H */
#ifndef _NF_CONNTRACK_HELPER_H
#define _NF_CONNTRACK_HELPER_H
#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_conntrack_extend.h>
struct module;
struct nf_conntrack_helper
-{
- struct list_head list; /* Internal use. */
+{
+ struct hlist_node hnode; /* Internal use. */
const char *name; /* name of the module */
struct module *me; /* pointer to self */
* expected connections */
unsigned int timeout; /* timeout for expecteds */
- /* Mask of things we will help (compared against server response) */
+ /* Tuple of things we will help (compared against server response) */
struct nf_conntrack_tuple tuple;
- struct nf_conntrack_tuple mask;
-
+
/* Function to call when data passes; return verdict, or -1 to
invalidate. */
int (*help)(struct sk_buff **pskb,
extern int nf_conntrack_helper_register(struct nf_conntrack_helper *);
extern void nf_conntrack_helper_unregister(struct nf_conntrack_helper *);
+extern struct nf_conn_help *nf_ct_helper_ext_add(struct nf_conn *ct, gfp_t gfp);
+
+static inline struct nf_conn_help *nfct_help(const struct nf_conn *ct)
+{
+ return nf_ct_ext_find(ct, NF_CT_EXT_HELPER);
+}
#endif /*_NF_CONNTRACK_HELPER_H*/
int (*prepare)(struct sk_buff **pskb, unsigned int hooknum,
unsigned int *dataoff, u_int8_t *protonum);
- u_int32_t (*get_features)(const struct nf_conntrack_tuple *tuple);
-
int (*tuple_to_nfattr)(struct sk_buff *skb,
const struct nf_conntrack_tuple *t);
} dst;
};
+struct nf_conntrack_tuple_mask
+{
+ struct {
+ union nf_conntrack_address u3;
+ union nf_conntrack_man_proto u;
+ } src;
+};
+
/* This is optimized opposed to a memset of the whole structure. Everything we
* really care about is the source/destination unions */
#define NF_CT_TUPLE_U_BLANK(tuple) \
#ifdef __KERNEL__
-#define NF_CT_DUMP_TUPLE(tp) \
-DEBUGP("tuple %p: %u %u " NIP6_FMT " %hu -> " NIP6_FMT " %hu\n", \
- (tp), (tp)->src.l3num, (tp)->dst.protonum, \
- NIP6(*(struct in6_addr *)(tp)->src.u3.all), ntohs((tp)->src.u.all), \
- NIP6(*(struct in6_addr *)(tp)->dst.u3.all), ntohs((tp)->dst.u.all))
+#define NF_CT_DUMP_TUPLE(tp) \
+pr_debug("tuple %p: %u %u " NIP6_FMT " %hu -> " NIP6_FMT " %hu\n", \
+ (tp), (tp)->src.l3num, (tp)->dst.protonum, \
+ NIP6(*(struct in6_addr *)(tp)->src.u3.all), ntohs((tp)->src.u.all), \
+ NIP6(*(struct in6_addr *)(tp)->dst.u3.all), ntohs((tp)->dst.u.all))
/* If we're the first tuple, it's the original dir. */
#define NF_CT_DIRECTION(h) \
/* Connections have two entries in the hash table: one for each way */
struct nf_conntrack_tuple_hash
{
- struct list_head list;
-
+ struct hlist_node hnode;
struct nf_conntrack_tuple tuple;
};
return nf_ct_tuple_src_equal(t1, t2) && nf_ct_tuple_dst_equal(t1, t2);
}
+static inline int nf_ct_tuple_mask_equal(const struct nf_conntrack_tuple_mask *m1,
+ const struct nf_conntrack_tuple_mask *m2)
+{
+ return (m1->src.u3.all[0] == m2->src.u3.all[0] &&
+ m1->src.u3.all[1] == m2->src.u3.all[1] &&
+ m1->src.u3.all[2] == m2->src.u3.all[2] &&
+ m1->src.u3.all[3] == m2->src.u3.all[3] &&
+ m1->src.u.all == m2->src.u.all);
+}
+
+static inline int nf_ct_tuple_src_mask_cmp(const struct nf_conntrack_tuple *t1,
+ const struct nf_conntrack_tuple *t2,
+ const struct nf_conntrack_tuple_mask *mask)
+{
+ int count;
+
+ for (count = 0; count < NF_CT_TUPLE_L3SIZE; count++) {
+ if ((t1->src.u3.all[count] ^ t2->src.u3.all[count]) &
+ mask->src.u3.all[count])
+ return 0;
+ }
+
+ if ((t1->src.u.all ^ t2->src.u.all) & mask->src.u.all)
+ return 0;
+
+ if (t1->src.l3num != t2->src.l3num ||
+ t1->dst.protonum != t2->dst.protonum)
+ return 0;
+
+ return 1;
+}
+
static inline int nf_ct_tuple_mask_cmp(const struct nf_conntrack_tuple *t,
const struct nf_conntrack_tuple *tuple,
- const struct nf_conntrack_tuple *mask)
+ const struct nf_conntrack_tuple_mask *mask)
{
- int count = 0;
-
- for (count = 0; count < NF_CT_TUPLE_L3SIZE; count++){
- if ((t->src.u3.all[count] ^ tuple->src.u3.all[count]) &
- mask->src.u3.all[count])
- return 0;
- }
-
- for (count = 0; count < NF_CT_TUPLE_L3SIZE; count++){
- if ((t->dst.u3.all[count] ^ tuple->dst.u3.all[count]) &
- mask->dst.u3.all[count])
- return 0;
- }
-
- if ((t->src.u.all ^ tuple->src.u.all) & mask->src.u.all ||
- (t->dst.u.all ^ tuple->dst.u.all) & mask->dst.u.all ||
- (t->src.l3num ^ tuple->src.l3num) & mask->src.l3num ||
- (t->dst.protonum ^ tuple->dst.protonum) & mask->dst.protonum)
- return 0;
-
- return 1;
+ return nf_ct_tuple_src_mask_cmp(t, tuple, mask) &&
+ nf_ct_tuple_dst_equal(t, tuple);
}
#endif /* _NF_CONNTRACK_TUPLE_H */
#ifdef __KERNEL__
#include <linux/list.h>
+#include <linux/netfilter/nf_conntrack_pptp.h>
+#include <net/netfilter/nf_conntrack_extend.h>
-/* The structure embedded in the conntrack structure. */
-struct nf_nat_info
+/* per conntrack: nat application helper private data */
+union nf_conntrack_nat_help
{
- struct list_head bysource;
- struct nf_nat_seq seq[IP_CT_DIR_MAX];
+ /* insert nat helper private data here */
+ struct nf_nat_pptp nat_pptp_info;
};
struct nf_conn;
+/* The structure embedded in the conntrack structure. */
+struct nf_conn_nat
+{
+ struct hlist_node bysource;
+ struct nf_nat_seq seq[IP_CT_DIR_MAX];
+ struct nf_conn *ct;
+ union nf_conntrack_nat_help help;
+#if defined(CONFIG_IP_NF_TARGET_MASQUERADE) || \
+ defined(CONFIG_IP_NF_TARGET_MASQUERADE_MODULE)
+ int masq_index;
+#endif
+};
+
/* Set up the info structure to map into this range. */
extern unsigned int nf_nat_setup_info(struct nf_conn *ct,
const struct nf_nat_range *range,
extern int nf_nat_used_tuple(const struct nf_conntrack_tuple *tuple,
const struct nf_conn *ignored_conntrack);
-extern int nf_nat_module_is_loaded;
+static inline struct nf_conn_nat *nfct_nat(const struct nf_conn *ct)
+{
+ return nf_ct_ext_find(ct, NF_CT_EXT_NAT);
+}
#else /* !__KERNEL__: iptables wants this to compile. */
#define nf_nat_multi_range nf_nat_multi_range_compat
#define _NF_NAT_CORE_H
#include <linux/list.h>
#include <net/netfilter/nf_conntrack.h>
+#include <net/netfilter/nf_nat.h>
/* This header used to share core functionality between the standalone
NAT module, and the compatibility layer's use of NAT for masquerading. */
* Nested Attributes Construction:
* nla_nest_start(skb, type) start a nested attribute
* nla_nest_end(skb, nla) finalize a nested attribute
+ * nla_nest_compat_start(skb, type, start a nested compat attribute
+ * len, data)
+ * nla_nest_compat_end(skb, type) finalize a nested compat attribute
* nla_nest_cancel(skb, nla) cancel nested attribute construction
*
* Attribute Length Calculations:
* nla_find_nested() find attribute in nested attributes
* nla_parse() parse and validate stream of attrs
* nla_parse_nested() parse nested attribuets
+ * nla_parse_nested_compat() parse nested compat attributes
* nla_for_each_attr() loop over all attributes
* nla_for_each_nested() loop over the nested attributes
*=========================================================================
NLA_FLAG,
NLA_MSECS,
NLA_NESTED,
+ NLA_NESTED_COMPAT,
NLA_NUL_STRING,
NLA_BINARY,
__NLA_TYPE_MAX,
* NLA_NUL_STRING Maximum length of string (excluding NUL)
* NLA_FLAG Unused
* NLA_BINARY Maximum length of attribute payload
+ * NLA_NESTED_COMPAT Exact length of structure payload
* All other Exact length of attribute payload
*
* Example:
{
return nla_parse(tb, maxtype, nla_data(nla), nla_len(nla), policy);
}
+
+/**
+ * nla_parse_nested_compat - parse nested compat attributes
+ * @tb: destination array with maxtype+1 elements
+ * @maxtype: maximum attribute type to be expected
+ * @nla: attribute containing the nested attributes
+ * @data: pointer to point to contained structure
+ * @len: length of contained structure
+ * @policy: validation policy
+ *
+ * Parse a nested compat attribute. The compat attribute contains a structure
+ * and optionally a set of nested attributes. On success the data pointer
+ * points to the nested data and tb contains the parsed attributes
+ * (see nla_parse).
+ */
+static inline int __nla_parse_nested_compat(struct nlattr *tb[], int maxtype,
+ struct nlattr *nla,
+ const struct nla_policy *policy,
+ int len)
+{
+ if (nla_len(nla) < len)
+ return -1;
+ if (nla_len(nla) >= NLA_ALIGN(len) + sizeof(struct nlattr))
+ return nla_parse_nested(tb, maxtype,
+ nla_data(nla) + NLA_ALIGN(len),
+ policy);
+ memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
+ return 0;
+}
+
+#define nla_parse_nested_compat(tb, maxtype, nla, policy, data, len) \
+({ data = nla_len(nla) >= len ? nla_data(nla) : NULL; \
+ __nla_parse_nested_compat(tb, maxtype, nla, policy, len); })
/**
* nla_put_u8 - Add a u16 netlink attribute to a socket buffer
* @skb: socket buffer to add attribute to
return skb->len;
}
+/**
+ * nla_nest_compat_start - Start a new level of nested compat attributes
+ * @skb: socket buffer to add attributes to
+ * @attrtype: attribute type of container
+ * @attrlen: length of structure
+ * @data: pointer to structure
+ *
+ * Start a nested compat attribute that contains both a structure and
+ * a set of nested attributes.
+ *
+ * Returns the container attribute
+ */
+static inline struct nlattr *nla_nest_compat_start(struct sk_buff *skb,
+ int attrtype, int attrlen,
+ const void *data)
+{
+ struct nlattr *start = (struct nlattr *)skb_tail_pointer(skb);
+
+ if (nla_put(skb, attrtype, attrlen, data) < 0)
+ return NULL;
+ if (nla_nest_start(skb, attrtype) == NULL) {
+ nlmsg_trim(skb, start);
+ return NULL;
+ }
+ return start;
+}
+
+/**
+ * nla_nest_compat_end - Finalize nesting of compat attributes
+ * @skb: socket buffer the attribtues are stored in
+ * @start: container attribute
+ *
+ * Corrects the container attribute header to include the all
+ * appeneded attributes.
+ *
+ * Returns the total data length of the skb.
+ */
+static inline int nla_nest_compat_end(struct sk_buff *skb, struct nlattr *start)
+{
+ struct nlattr *nest = (void *)start + NLMSG_ALIGN(start->nla_len);
+
+ start->nla_len = skb_tail_pointer(skb) - (unsigned char *)start;
+ return nla_nest_end(skb, nest);
+}
+
/**
* nla_nest_cancel - Cancel nesting of attributes
* @skb: socket buffer the message is stored in
return 1;
}
+#define MODULE_ALIAS_TCF_EMATCH(kind) MODULE_ALIAS("ematch-kind-" __stringify(kind))
+
#else /* CONFIG_NET_EMATCH */
struct tcf_ematch_tree
#ifdef __KERNEL__
+#include <net/protocol.h>
+
#define RAWV6_HTABLE_SIZE MAX_INET_PROTOS
extern struct hlist_head raw_v6_htable[RAWV6_HTABLE_SIZE];
extern rwlock_t raw_v6_lock;
int type, int code,
int offset, __be32 info);
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+int rawv6_mh_filter_register(int (*filter)(struct sock *sock,
+ struct sk_buff *skb));
+int rawv6_mh_filter_unregister(int (*filter)(struct sock *sock,
+ struct sk_buff *skb));
+#endif
+
#endif
#endif
unsigned rt_flags;
__u16 rt_type;
- __u16 rt_multipath_alg;
__be32 rt_dst; /* Path destination */
__be32 rt_src; /* Path source */
#define IPTOS_RT_MASK (IPTOS_TOS_MASK & ~3)
-extern __u8 ip_tos2prio[16];
+extern const __u8 ip_tos2prio[16];
static inline char rt_tos2priority(u8 tos)
{
return AF_UNSPEC;
}
+/**
+ * struct rtnl_link_ops - rtnetlink link operations
+ *
+ * @list: Used internally
+ * @kind: Identifier
+ * @maxtype: Highest device specific netlink attribute number
+ * @policy: Netlink policy for device specific attribute validation
+ * @validate: Optional validation function for netlink/changelink parameters
+ * @priv_size: sizeof net_device private space
+ * @setup: net_device setup function
+ * @newlink: Function for configuring and registering a new device
+ * @changelink: Function for changing parameters of an existing device
+ * @dellink: Function to remove a device
+ * @get_size: Function to calculate required room for dumping device
+ * specific netlink attributes
+ * @fill_info: Function to dump device specific netlink attributes
+ * @get_xstats_size: Function to calculate required room for dumping devic
+ * specific statistics
+ * @fill_xstats: Function to dump device specific statistics
+ */
+struct rtnl_link_ops {
+ struct list_head list;
+
+ const char *kind;
+
+ size_t priv_size;
+ void (*setup)(struct net_device *dev);
+
+ int maxtype;
+ const struct nla_policy *policy;
+ int (*validate)(struct nlattr *tb[],
+ struct nlattr *data[]);
+
+ int (*newlink)(struct net_device *dev,
+ struct nlattr *tb[],
+ struct nlattr *data[]);
+ int (*changelink)(struct net_device *dev,
+ struct nlattr *tb[],
+ struct nlattr *data[]);
+ void (*dellink)(struct net_device *dev);
+
+ size_t (*get_size)(const struct net_device *dev);
+ int (*fill_info)(struct sk_buff *skb,
+ const struct net_device *dev);
+
+ size_t (*get_xstats_size)(const struct net_device *dev);
+ int (*fill_xstats)(struct sk_buff *skb,
+ const struct net_device *dev);
+};
+
+extern int __rtnl_link_register(struct rtnl_link_ops *ops);
+extern void __rtnl_link_unregister(struct rtnl_link_ops *ops);
+
+extern int rtnl_link_register(struct rtnl_link_ops *ops);
+extern void rtnl_link_unregister(struct rtnl_link_ops *ops);
+
+#define MODULE_ALIAS_RTNL_LINK(kind) MODULE_ALIAS("rtnl-link-" kind)
+
#endif
/*
* include/net/tipc/tipc_port.h: Include file for privileged access to TIPC ports
*
- * Copyright (c) 1994-2006, Ericsson AB
- * Copyright (c) 2005, Wind River Systems
+ * Copyright (c) 1994-2007, Ericsson AB
+ * Copyright (c) 2005-2007, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* @conn_unacked: number of unacknowledged messages received from peer port
* @published: non-zero if port has one or more associated names
* @congested: non-zero if cannot send because of link or port congestion
+ * @max_pkt: maximum packet size "hint" used when building messages sent by port
* @ref: unique reference to port in TIPC object registry
* @phdr: preformatted message header used when sending messages
*/
u32 conn_unacked;
int published;
u32 congested;
+ u32 max_pkt;
u32 ref;
struct tipc_msg phdr;
};
#include <net/ipv6.h>
#include <net/ip6_fib.h>
+#define XFRM_PROTO_ESP 50
+#define XFRM_PROTO_AH 51
+#define XFRM_PROTO_COMP 108
+#define XFRM_PROTO_IPIP 4
+#define XFRM_PROTO_IPV6 41
+#define XFRM_PROTO_ROUTING IPPROTO_ROUTING
+#define XFRM_PROTO_DSTOPTS IPPROTO_DSTOPTS
+
#define XFRM_ALIGN8(len) (((len) + 7) & ~7)
#define MODULE_ALIAS_XFRM_MODE(family, encap) \
MODULE_ALIAS("xfrm-mode-" __stringify(family) "-" __stringify(encap))
+#define MODULE_ALIAS_XFRM_TYPE(family, proto) \
+ MODULE_ALIAS("xfrm-type-" __stringify(family) "-" __stringify(proto))
extern struct sock *xfrm_nl;
extern u32 sysctl_xfrm_aevent_etime;
case IPPROTO_ICMPV6:
port = htons(fl->fl_icmp_type);
break;
-#ifdef CONFIG_IPV6_MIP6
case IPPROTO_MH:
port = htons(fl->fl_mh_type);
break;
-#endif
default:
port = 0; /*XXX*/
}
struct flowi *fl, struct xfrm_tmpl *tmpl,
struct xfrm_policy *pol, int *err,
unsigned short family);
+extern struct xfrm_state * xfrm_stateonly_find(xfrm_address_t *daddr,
+ xfrm_address_t *saddr,
+ unsigned short family,
+ u8 mode, u8 proto, u32 reqid);
extern int xfrm_state_check_expire(struct xfrm_state *x);
extern void xfrm_state_insert(struct xfrm_state *x);
extern int xfrm_state_add(struct xfrm_state *x);
u8 **prevhdr);
#ifdef CONFIG_XFRM
-extern int xfrm4_rcv_encap(struct sk_buff *skb, __u16 encap_type);
+extern int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb);
extern int xfrm_user_policy(struct sock *sk, int optname, u8 __user *optval, int optlen);
extern int xfrm_dst_lookup(struct xfrm_dst **dst, struct flowi *fl, unsigned short family);
#else
return -ENOPROTOOPT;
}
-static inline int xfrm4_rcv_encap(struct sk_buff *skb, __u16 encap_type)
+static inline int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb)
{
/* should not happen */
kfree_skb(skb);
return 0;
}
+
static inline int xfrm_dst_lookup(struct xfrm_dst **dst, struct flowi *fl, unsigned short family)
{
return -EINVAL;
mod->field = NULL; \
} \
static struct module_attribute modinfo_##field = { \
- .attr = { .name = __stringify(field), .mode = 0444, \
- .owner = THIS_MODULE }, \
+ .attr = { .name = __stringify(field), .mode = 0444 }, \
.show = show_modinfo_##field, \
.setup = setup_modinfo_##field, \
.test = modinfo_##field##_exists, \
}
static struct module_attribute refcnt = {
- .attr = { .name = "refcnt", .mode = 0444, .owner = THIS_MODULE },
+ .attr = { .name = "refcnt", .mode = 0444 },
.show = show_refcnt,
};
}
static struct module_attribute initstate = {
- .attr = { .name = "initstate", .mode = 0444, .owner = THIS_MODULE },
+ .attr = { .name = "initstate", .mode = 0444 },
.show = show_initstate,
};
sattr->mattr.show = module_sect_show;
sattr->mattr.store = NULL;
sattr->mattr.attr.name = sattr->name;
- sattr->mattr.attr.owner = mod;
sattr->mattr.attr.mode = S_IRUGO;
*(gattr++) = &(sattr++)->mattr.attr;
}
if (!attr->test ||
(attr->test && attr->test(mod))) {
memcpy(temp_attr, attr, sizeof(*temp_attr));
- temp_attr->attr.owner = mod;
error = sysfs_create_file(&mod->mkobj.kobj,&temp_attr->attr);
++temp_attr;
}
pattr->mattr.show = param_attr_show;
pattr->mattr.store = param_attr_store;
pattr->mattr.attr.name = (char *)&kp->name[name_skip];
- pattr->mattr.attr.owner = mk->mod;
pattr->mattr.attr.mode = kp->perm;
*(gattr++) = &(pattr++)->mattr.attr;
}
spin_unlock_irqrestore(&idp->lock, flags);
}
+static void idr_mark_full(struct idr_layer **pa, int id)
+{
+ struct idr_layer *p = pa[0];
+ int l = 0;
+
+ __set_bit(id & IDR_MASK, &p->bitmap);
+ /*
+ * If this layer is full mark the bit in the layer above to
+ * show that this part of the radix tree is full. This may
+ * complete the layer above and require walking up the radix
+ * tree.
+ */
+ while (p->bitmap == IDR_FULL) {
+ if (!(p = pa[++l]))
+ break;
+ id = id >> IDR_BITS;
+ __set_bit((id & IDR_MASK), &p->bitmap);
+ }
+}
+
/**
* idr_pre_get - reserver resources for idr allocation
* @idp: idr handle
}
EXPORT_SYMBOL(idr_pre_get);
-static int sub_alloc(struct idr *idp, void *ptr, int *starting_id)
+static int sub_alloc(struct idr *idp, int *starting_id, struct idr_layer **pa)
{
int n, m, sh;
struct idr_layer *p, *new;
- struct idr_layer *pa[MAX_LEVEL];
- int l, id;
+ int l, id, oid;
long bm;
id = *starting_id;
+ restart:
p = idp->top;
l = idp->layers;
pa[l--] = NULL;
if (m == IDR_SIZE) {
/* no space available go back to previous layer. */
l++;
+ oid = id;
id = (id | ((1 << (IDR_BITS * l)) - 1)) + 1;
+
+ /* if already at the top layer, we need to grow */
if (!(p = pa[l])) {
*starting_id = id;
return -2;
}
- continue;
+
+ /* If we need to go up one layer, continue the
+ * loop; otherwise, restart from the top.
+ */
+ sh = IDR_BITS * (l + 1);
+ if (oid >> sh == id >> sh)
+ continue;
+ else
+ goto restart;
}
if (m != n) {
sh = IDR_BITS*l;
pa[l--] = p;
p = p->ary[m];
}
- /*
- * We have reached the leaf node, plant the
- * users pointer and return the raw id.
- */
- p->ary[m] = (struct idr_layer *)ptr;
- __set_bit(m, &p->bitmap);
- p->count++;
- /*
- * If this layer is full mark the bit in the layer above
- * to show that this part of the radix tree is full.
- * This may complete the layer above and require walking
- * up the radix tree.
- */
- n = id;
- while (p->bitmap == IDR_FULL) {
- if (!(p = pa[++l]))
- break;
- n = n >> IDR_BITS;
- __set_bit((n & IDR_MASK), &p->bitmap);
- }
- return(id);
+
+ pa[l] = p;
+ return id;
}
-static int idr_get_new_above_int(struct idr *idp, void *ptr, int starting_id)
+static int idr_get_empty_slot(struct idr *idp, int starting_id,
+ struct idr_layer **pa)
{
struct idr_layer *p, *new;
int layers, v, id;
}
idp->top = p;
idp->layers = layers;
- v = sub_alloc(idp, ptr, &id);
+ v = sub_alloc(idp, &id, pa);
if (v == -2)
goto build_up;
return(v);
}
+static int idr_get_new_above_int(struct idr *idp, void *ptr, int starting_id)
+{
+ struct idr_layer *pa[MAX_LEVEL];
+ int id;
+
+ id = idr_get_empty_slot(idp, starting_id, pa);
+ if (id >= 0) {
+ /*
+ * Successfully found an empty slot. Install the user
+ * pointer and mark the slot full.
+ */
+ pa[0]->ary[id & IDR_MASK] = (struct idr_layer *)ptr;
+ pa[0]->count++;
+ idr_mark_full(pa, id);
+ }
+
+ return id;
+}
+
/**
* idr_get_new_above - allocate new idr entry above or equal to a start id
* @idp: idr handle
spin_lock_init(&idp->lock);
}
EXPORT_SYMBOL(idr_init);
+
+
+/*
+ * IDA - IDR based ID allocator
+ *
+ * this is id allocator without id -> pointer translation. Memory
+ * usage is much lower than full blown idr because each id only
+ * occupies a bit. ida uses a custom leaf node which contains
+ * IDA_BITMAP_BITS slots.
+ *
+ * 2007-04-25 written by Tejun Heo <htejun@gmail.com>
+ */
+
+static void free_bitmap(struct ida *ida, struct ida_bitmap *bitmap)
+{
+ unsigned long flags;
+
+ if (!ida->free_bitmap) {
+ spin_lock_irqsave(&ida->idr.lock, flags);
+ if (!ida->free_bitmap) {
+ ida->free_bitmap = bitmap;
+ bitmap = NULL;
+ }
+ spin_unlock_irqrestore(&ida->idr.lock, flags);
+ }
+
+ kfree(bitmap);
+}
+
+/**
+ * ida_pre_get - reserve resources for ida allocation
+ * @ida: ida handle
+ * @gfp_mask: memory allocation flag
+ *
+ * This function should be called prior to locking and calling the
+ * following function. It preallocates enough memory to satisfy the
+ * worst possible allocation.
+ *
+ * If the system is REALLY out of memory this function returns 0,
+ * otherwise 1.
+ */
+int ida_pre_get(struct ida *ida, gfp_t gfp_mask)
+{
+ /* allocate idr_layers */
+ if (!idr_pre_get(&ida->idr, gfp_mask))
+ return 0;
+
+ /* allocate free_bitmap */
+ if (!ida->free_bitmap) {
+ struct ida_bitmap *bitmap;
+
+ bitmap = kmalloc(sizeof(struct ida_bitmap), gfp_mask);
+ if (!bitmap)
+ return 0;
+
+ free_bitmap(ida, bitmap);
+ }
+
+ return 1;
+}
+EXPORT_SYMBOL(ida_pre_get);
+
+/**
+ * ida_get_new_above - allocate new ID above or equal to a start id
+ * @ida: ida handle
+ * @staring_id: id to start search at
+ * @p_id: pointer to the allocated handle
+ *
+ * Allocate new ID above or equal to @ida. It should be called with
+ * any required locks.
+ *
+ * If memory is required, it will return -EAGAIN, you should unlock
+ * and go back to the ida_pre_get() call. If the ida is full, it will
+ * return -ENOSPC.
+ *
+ * @p_id returns a value in the range 0 ... 0x7fffffff.
+ */
+int ida_get_new_above(struct ida *ida, int starting_id, int *p_id)
+{
+ struct idr_layer *pa[MAX_LEVEL];
+ struct ida_bitmap *bitmap;
+ unsigned long flags;
+ int idr_id = starting_id / IDA_BITMAP_BITS;
+ int offset = starting_id % IDA_BITMAP_BITS;
+ int t, id;
+
+ restart:
+ /* get vacant slot */
+ t = idr_get_empty_slot(&ida->idr, idr_id, pa);
+ if (t < 0) {
+ if (t == -1)
+ return -EAGAIN;
+ else /* will be -3 */
+ return -ENOSPC;
+ }
+
+ if (t * IDA_BITMAP_BITS >= MAX_ID_BIT)
+ return -ENOSPC;
+
+ if (t != idr_id)
+ offset = 0;
+ idr_id = t;
+
+ /* if bitmap isn't there, create a new one */
+ bitmap = (void *)pa[0]->ary[idr_id & IDR_MASK];
+ if (!bitmap) {
+ spin_lock_irqsave(&ida->idr.lock, flags);
+ bitmap = ida->free_bitmap;
+ ida->free_bitmap = NULL;
+ spin_unlock_irqrestore(&ida->idr.lock, flags);
+
+ if (!bitmap)
+ return -EAGAIN;
+
+ memset(bitmap, 0, sizeof(struct ida_bitmap));
+ pa[0]->ary[idr_id & IDR_MASK] = (void *)bitmap;
+ pa[0]->count++;
+ }
+
+ /* lookup for empty slot */
+ t = find_next_zero_bit(bitmap->bitmap, IDA_BITMAP_BITS, offset);
+ if (t == IDA_BITMAP_BITS) {
+ /* no empty slot after offset, continue to the next chunk */
+ idr_id++;
+ offset = 0;
+ goto restart;
+ }
+
+ id = idr_id * IDA_BITMAP_BITS + t;
+ if (id >= MAX_ID_BIT)
+ return -ENOSPC;
+
+ __set_bit(t, bitmap->bitmap);
+ if (++bitmap->nr_busy == IDA_BITMAP_BITS)
+ idr_mark_full(pa, idr_id);
+
+ *p_id = id;
+
+ /* Each leaf node can handle nearly a thousand slots and the
+ * whole idea of ida is to have small memory foot print.
+ * Throw away extra resources one by one after each successful
+ * allocation.
+ */
+ if (ida->idr.id_free_cnt || ida->free_bitmap) {
+ struct idr_layer *p = alloc_layer(&ida->idr);
+ if (p)
+ kmem_cache_free(idr_layer_cache, p);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(ida_get_new_above);
+
+/**
+ * ida_get_new - allocate new ID
+ * @ida: idr handle
+ * @p_id: pointer to the allocated handle
+ *
+ * Allocate new ID. It should be called with any required locks.
+ *
+ * If memory is required, it will return -EAGAIN, you should unlock
+ * and go back to the idr_pre_get() call. If the idr is full, it will
+ * return -ENOSPC.
+ *
+ * @id returns a value in the range 0 ... 0x7fffffff.
+ */
+int ida_get_new(struct ida *ida, int *p_id)
+{
+ return ida_get_new_above(ida, 0, p_id);
+}
+EXPORT_SYMBOL(ida_get_new);
+
+/**
+ * ida_remove - remove the given ID
+ * @ida: ida handle
+ * @id: ID to free
+ */
+void ida_remove(struct ida *ida, int id)
+{
+ struct idr_layer *p = ida->idr.top;
+ int shift = (ida->idr.layers - 1) * IDR_BITS;
+ int idr_id = id / IDA_BITMAP_BITS;
+ int offset = id % IDA_BITMAP_BITS;
+ int n;
+ struct ida_bitmap *bitmap;
+
+ /* clear full bits while looking up the leaf idr_layer */
+ while ((shift > 0) && p) {
+ n = (idr_id >> shift) & IDR_MASK;
+ __clear_bit(n, &p->bitmap);
+ p = p->ary[n];
+ shift -= IDR_BITS;
+ }
+
+ if (p == NULL)
+ goto err;
+
+ n = idr_id & IDR_MASK;
+ __clear_bit(n, &p->bitmap);
+
+ bitmap = (void *)p->ary[n];
+ if (!test_bit(offset, bitmap->bitmap))
+ goto err;
+
+ /* update bitmap and remove it if empty */
+ __clear_bit(offset, bitmap->bitmap);
+ if (--bitmap->nr_busy == 0) {
+ __set_bit(n, &p->bitmap); /* to please idr_remove() */
+ idr_remove(&ida->idr, idr_id);
+ free_bitmap(ida, bitmap);
+ }
+
+ return;
+
+ err:
+ printk(KERN_WARNING
+ "ida_remove called for id=%d which is not allocated.\n", id);
+}
+EXPORT_SYMBOL(ida_remove);
+
+/**
+ * ida_destroy - release all cached layers within an ida tree
+ * ida: ida handle
+ */
+void ida_destroy(struct ida *ida)
+{
+ idr_destroy(&ida->idr);
+ kfree(ida->free_bitmap);
+}
+EXPORT_SYMBOL(ida_destroy);
+
+/**
+ * ida_init - initialize ida handle
+ * @ida: ida handle
+ *
+ * This function is use to set up the handle (@ida) that you will pass
+ * to the rest of the functions.
+ */
+void ida_init(struct ida *ida)
+{
+ memset(ida, 0, sizeof(struct ida));
+ idr_init(&ida->idr);
+
+}
+EXPORT_SYMBOL(ida_init);
return error;
}
-static int create_dir(struct kobject * kobj, struct dentry *shadow_parent)
+static int create_dir(struct kobject *kobj, struct sysfs_dirent *shadow_parent)
{
int error = 0;
if (kobject_name(kobj)) {
* @shadow_parent: sysfs directory to add to.
*/
-int kobject_shadow_add(struct kobject * kobj, struct dentry *shadow_parent)
+int kobject_shadow_add(struct kobject *kobj, struct sysfs_dirent *shadow_parent)
{
int error = 0;
struct kobject * parent;
/* Note : if we want to send the new name alone, not the full path,
* we could probably use kobject_name(kobj); */
- error = sysfs_rename_dir(kobj, kobj->parent->dentry, new_name);
+ error = sysfs_rename_dir(kobj, kobj->parent->sd, new_name);
/* This function is mostly/only used for network interface.
* Some hotplug package track interfaces by their name and
* @new_name: object's new name
*/
-int kobject_shadow_rename(struct kobject * kobj, struct dentry *new_parent,
- const char *new_name)
+int kobject_shadow_rename(struct kobject *kobj,
+ struct sysfs_dirent *new_parent, const char *new_name)
{
int error = 0;
int kset_register(struct kset * k)
{
+ int err;
+
if (!k)
return -EINVAL;
+
kset_init(k);
- return kset_add(k);
+ err = kset_add(k);
+ if (err)
+ return err;
+ kobject_uevent(&k->kobj, KOBJ_ADD);
+ return 0;
}
}
-static struct seq_operations rif_seq_ops = {
+static const struct seq_operations rif_seq_ops = {
.start = rif_seq_start,
.next = rif_seq_next,
.stop = rif_seq_stop,
obj-$(CONFIG_VLAN_8021Q) += 8021q.o
-8021q-objs := vlan.o vlan_dev.o
+8021q-objs := vlan.o vlan_dev.o vlan_netlink.o
ifeq ($(CONFIG_PROC_FS),y)
8021q-objs += vlanproc.o
/* Register us to receive netdevice events */
err = register_netdevice_notifier(&vlan_notifier_block);
- if (err < 0) {
- dev_remove_pack(&vlan_packet_type);
- vlan_proc_cleanup();
- return err;
- }
+ if (err < 0)
+ goto err1;
- vlan_ioctl_set(vlan_ioctl_handler);
+ err = vlan_netlink_init();
+ if (err < 0)
+ goto err2;
+ vlan_ioctl_set(vlan_ioctl_handler);
return 0;
-}
-
-/* Cleanup all vlan devices
- * Note: devices that have been registered that but not
- * brought up will exist but have no module ref count.
- */
-static void __exit vlan_cleanup_devices(void)
-{
- struct net_device *dev, *nxt;
-
- rtnl_lock();
- for_each_netdev_safe(dev, nxt) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev,
- VLAN_DEV_INFO(dev)->vlan_id);
- unregister_netdevice(dev);
- }
- }
- rtnl_unlock();
+err2:
+ unregister_netdevice_notifier(&vlan_notifier_block);
+err1:
+ vlan_proc_cleanup();
+ dev_remove_pack(&vlan_packet_type);
+ return err;
}
/*
{
int i;
+ vlan_netlink_fini();
vlan_ioctl_set(NULL);
/* Un-register us from receiving netdevice events */
unregister_netdevice_notifier(&vlan_notifier_block);
dev_remove_pack(&vlan_packet_type);
- vlan_cleanup_devices();
/* This table must be empty if there are no module
* references left.
kfree(grp);
}
+static struct vlan_group *vlan_group_alloc(int ifindex)
+{
+ struct vlan_group *grp;
+ unsigned int size;
+ unsigned int i;
+
+ grp = kzalloc(sizeof(struct vlan_group), GFP_KERNEL);
+ if (!grp)
+ return NULL;
+
+ size = sizeof(struct net_device *) * VLAN_GROUP_ARRAY_PART_LEN;
+
+ for (i = 0; i < VLAN_GROUP_ARRAY_SPLIT_PARTS; i++) {
+ grp->vlan_devices_arrays[i] = kzalloc(size, GFP_KERNEL);
+ if (!grp->vlan_devices_arrays[i])
+ goto err;
+ }
+
+ grp->real_dev_ifindex = ifindex;
+ hlist_add_head_rcu(&grp->hlist,
+ &vlan_group_hash[vlan_grp_hashfn(ifindex)]);
+ return grp;
+
+err:
+ vlan_group_free(grp);
+ return NULL;
+}
+
static void vlan_rcu_free(struct rcu_head *rcu)
{
vlan_group_free(container_of(rcu, struct vlan_group, rcu));
return ret;
}
-static int unregister_vlan_device(const char *vlan_IF_name)
+int unregister_vlan_device(struct net_device *dev)
{
- struct net_device *dev = NULL;
int ret;
+ ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev,
+ VLAN_DEV_INFO(dev)->vlan_id);
+ unregister_netdevice(dev);
- dev = dev_get_by_name(vlan_IF_name);
- ret = -EINVAL;
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- rtnl_lock();
+ if (ret == 1)
+ ret = 0;
+ return ret;
+}
- ret = unregister_vlan_dev(VLAN_DEV_INFO(dev)->real_dev,
- VLAN_DEV_INFO(dev)->vlan_id);
+/*
+ * vlan network devices have devices nesting below it, and are a special
+ * "super class" of normal network devices; split their locks off into a
+ * separate class since they always nest.
+ */
+static struct lock_class_key vlan_netdev_xmit_lock_key;
- dev_put(dev);
- unregister_netdevice(dev);
+static int vlan_dev_init(struct net_device *dev)
+{
+ struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
- rtnl_unlock();
+ /* IFF_BROADCAST|IFF_MULTICAST; ??? */
+ dev->flags = real_dev->flags & ~IFF_UP;
+ dev->iflink = real_dev->ifindex;
+ dev->state = (real_dev->state & ((1<<__LINK_STATE_NOCARRIER) |
+ (1<<__LINK_STATE_DORMANT))) |
+ (1<<__LINK_STATE_PRESENT);
- if (ret == 1)
- ret = 0;
- } else {
- printk(VLAN_ERR
- "%s: ERROR: Tried to remove a non-vlan device "
- "with VLAN code, name: %s priv_flags: %hX\n",
- __FUNCTION__, dev->name, dev->priv_flags);
- dev_put(dev);
- ret = -EPERM;
- }
+ if (is_zero_ether_addr(dev->dev_addr))
+ memcpy(dev->dev_addr, real_dev->dev_addr, dev->addr_len);
+ if (is_zero_ether_addr(dev->broadcast))
+ memcpy(dev->broadcast, real_dev->broadcast, dev->addr_len);
+
+ if (real_dev->features & NETIF_F_HW_VLAN_TX) {
+ dev->hard_header = real_dev->hard_header;
+ dev->hard_header_len = real_dev->hard_header_len;
+ dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit;
+ dev->rebuild_header = real_dev->rebuild_header;
} else {
-#ifdef VLAN_DEBUG
- printk(VLAN_DBG "%s: WARNING: Could not find dev.\n", __FUNCTION__);
-#endif
- ret = -EINVAL;
+ dev->hard_header = vlan_dev_hard_header;
+ dev->hard_header_len = real_dev->hard_header_len + VLAN_HLEN;
+ dev->hard_start_xmit = vlan_dev_hard_start_xmit;
+ dev->rebuild_header = vlan_dev_rebuild_header;
}
+ dev->hard_header_parse = real_dev->hard_header_parse;
+ dev->hard_header_cache = NULL;
- return ret;
+ lockdep_set_class(&dev->_xmit_lock, &vlan_netdev_xmit_lock_key);
+ return 0;
}
-static void vlan_setup(struct net_device *new_dev)
+void vlan_setup(struct net_device *new_dev)
{
SET_MODULE_OWNER(new_dev);
+ ether_setup(new_dev);
+
/* new_dev->ifindex = 0; it will be set when added to
* the global list.
* iflink is set as well.
/* set up method calls */
new_dev->change_mtu = vlan_dev_change_mtu;
+ new_dev->init = vlan_dev_init;
new_dev->open = vlan_dev_open;
new_dev->stop = vlan_dev_stop;
- new_dev->set_mac_address = vlan_dev_set_mac_address;
new_dev->set_multicast_list = vlan_dev_set_multicast_list;
new_dev->destructor = free_netdev;
new_dev->do_ioctl = vlan_dev_ioctl;
+
+ memset(new_dev->broadcast, 0, sizeof(ETH_ALEN));
}
static void vlan_transfer_operstate(const struct net_device *dev, struct net_device *vlandev)
}
}
-/*
- * vlan network devices have devices nesting below it, and are a special
- * "super class" of normal network devices; split their locks off into a
- * separate class since they always nest.
- */
-static struct lock_class_key vlan_netdev_xmit_lock_key;
-
-
-/* Attach a VLAN device to a mac address (ie Ethernet Card).
- * Returns the device that was created, or NULL if there was
- * an error of some kind.
- */
-static struct net_device *register_vlan_device(const char *eth_IF_name,
- unsigned short VLAN_ID)
+int vlan_check_real_dev(struct net_device *real_dev, unsigned short vlan_id)
{
- struct vlan_group *grp;
- struct net_device *new_dev;
- struct net_device *real_dev; /* the ethernet device */
- char name[IFNAMSIZ];
- int i;
-
-#ifdef VLAN_DEBUG
- printk(VLAN_DBG "%s: if_name -:%s:- vid: %i\n",
- __FUNCTION__, eth_IF_name, VLAN_ID);
-#endif
-
- if (VLAN_ID >= VLAN_VID_MASK)
- goto out_ret_null;
-
- /* find the device relating to eth_IF_name. */
- real_dev = dev_get_by_name(eth_IF_name);
- if (!real_dev)
- goto out_ret_null;
-
if (real_dev->features & NETIF_F_VLAN_CHALLENGED) {
printk(VLAN_DBG "%s: VLANs not supported on %s.\n",
__FUNCTION__, real_dev->name);
- goto out_put_dev;
+ return -EOPNOTSUPP;
}
if ((real_dev->features & NETIF_F_HW_VLAN_RX) &&
!real_dev->vlan_rx_register) {
printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n",
__FUNCTION__, real_dev->name);
- goto out_put_dev;
+ return -EOPNOTSUPP;
}
if ((real_dev->features & NETIF_F_HW_VLAN_FILTER) &&
(!real_dev->vlan_rx_add_vid || !real_dev->vlan_rx_kill_vid)) {
printk(VLAN_DBG "%s: Device %s has buggy VLAN hw accel.\n",
__FUNCTION__, real_dev->name);
- goto out_put_dev;
+ return -EOPNOTSUPP;
}
- /* From this point on, all the data structures must remain
- * consistent.
- */
- rtnl_lock();
-
/* The real device must be up and operating in order to
* assosciate a VLAN device with it.
*/
if (!(real_dev->flags & IFF_UP))
- goto out_unlock;
+ return -ENETDOWN;
- if (__find_vlan_dev(real_dev, VLAN_ID) != NULL) {
+ if (__find_vlan_dev(real_dev, vlan_id) != NULL) {
/* was already registered. */
printk(VLAN_DBG "%s: ALREADY had VLAN registered\n", __FUNCTION__);
- goto out_unlock;
+ return -EEXIST;
+ }
+
+ return 0;
+}
+
+int register_vlan_dev(struct net_device *dev)
+{
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
+ struct net_device *real_dev = vlan->real_dev;
+ unsigned short vlan_id = vlan->vlan_id;
+ struct vlan_group *grp, *ngrp = NULL;
+ int err;
+
+ grp = __vlan_find_group(real_dev->ifindex);
+ if (!grp) {
+ ngrp = grp = vlan_group_alloc(real_dev->ifindex);
+ if (!grp)
+ return -ENOBUFS;
}
+ err = register_netdevice(dev);
+ if (err < 0)
+ goto out_free_group;
+
+ /* Account for reference in struct vlan_dev_info */
+ dev_hold(real_dev);
+
+ vlan_transfer_operstate(real_dev, dev);
+ linkwatch_fire_event(dev); /* _MUST_ call rfc2863_policy() */
+
+ /* So, got the sucker initialized, now lets place
+ * it into our local structure.
+ */
+ vlan_group_set_device(grp, vlan_id, dev);
+ if (ngrp && real_dev->features & NETIF_F_HW_VLAN_RX)
+ real_dev->vlan_rx_register(real_dev, ngrp);
+ if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
+ real_dev->vlan_rx_add_vid(real_dev, vlan_id);
+
+ if (vlan_proc_add_dev(dev) < 0)
+ printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n",
+ dev->name);
+ return 0;
+
+out_free_group:
+ if (ngrp)
+ vlan_group_free(ngrp);
+ return err;
+}
+
+/* Attach a VLAN device to a mac address (ie Ethernet Card).
+ * Returns 0 if the device was created or a negative error code otherwise.
+ */
+static int register_vlan_device(struct net_device *real_dev,
+ unsigned short VLAN_ID)
+{
+ struct net_device *new_dev;
+ char name[IFNAMSIZ];
+ int err;
+
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "%s: if_name -:%s:- vid: %i\n",
+ __FUNCTION__, eth_IF_name, VLAN_ID);
+#endif
+
+ if (VLAN_ID >= VLAN_VID_MASK)
+ return -ERANGE;
+
+ err = vlan_check_real_dev(real_dev, VLAN_ID);
+ if (err < 0)
+ return err;
+
/* Gotta set up the fields for the device. */
#ifdef VLAN_DEBUG
printk(VLAN_DBG "About to allocate name, vlan_name_type: %i\n",
vlan_setup);
if (new_dev == NULL)
- goto out_unlock;
-
-#ifdef VLAN_DEBUG
- printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name);
-#endif
- /* IFF_BROADCAST|IFF_MULTICAST; ??? */
- new_dev->flags = real_dev->flags;
- new_dev->flags &= ~IFF_UP;
-
- new_dev->state = (real_dev->state & ((1<<__LINK_STATE_NOCARRIER) |
- (1<<__LINK_STATE_DORMANT))) |
- (1<<__LINK_STATE_PRESENT);
+ return -ENOBUFS;
/* need 4 bytes for extra VLAN header info,
* hope the underlying device can handle it.
*/
new_dev->mtu = real_dev->mtu;
- /* TODO: maybe just assign it to be ETHERNET? */
- new_dev->type = real_dev->type;
-
- new_dev->hard_header_len = real_dev->hard_header_len;
- if (!(real_dev->features & NETIF_F_HW_VLAN_TX)) {
- /* Regular ethernet + 4 bytes (18 total). */
- new_dev->hard_header_len += VLAN_HLEN;
- }
-
+#ifdef VLAN_DEBUG
+ printk(VLAN_DBG "Allocated new name -:%s:-\n", new_dev->name);
VLAN_MEM_DBG("new_dev->priv malloc, addr: %p size: %i\n",
new_dev->priv,
sizeof(struct vlan_dev_info));
-
- memcpy(new_dev->broadcast, real_dev->broadcast, real_dev->addr_len);
- memcpy(new_dev->dev_addr, real_dev->dev_addr, real_dev->addr_len);
- new_dev->addr_len = real_dev->addr_len;
-
- if (real_dev->features & NETIF_F_HW_VLAN_TX) {
- new_dev->hard_header = real_dev->hard_header;
- new_dev->hard_start_xmit = vlan_dev_hwaccel_hard_start_xmit;
- new_dev->rebuild_header = real_dev->rebuild_header;
- } else {
- new_dev->hard_header = vlan_dev_hard_header;
- new_dev->hard_start_xmit = vlan_dev_hard_start_xmit;
- new_dev->rebuild_header = vlan_dev_rebuild_header;
- }
- new_dev->hard_header_parse = real_dev->hard_header_parse;
+#endif
VLAN_DEV_INFO(new_dev)->vlan_id = VLAN_ID; /* 1 through VLAN_VID_MASK */
VLAN_DEV_INFO(new_dev)->real_dev = real_dev;
VLAN_DEV_INFO(new_dev)->dent = NULL;
- VLAN_DEV_INFO(new_dev)->flags = 1;
+ VLAN_DEV_INFO(new_dev)->flags = VLAN_FLAG_REORDER_HDR;
-#ifdef VLAN_DEBUG
- printk(VLAN_DBG "About to go find the group for idx: %i\n",
- real_dev->ifindex);
-#endif
-
- if (register_netdevice(new_dev))
+ new_dev->rtnl_link_ops = &vlan_link_ops;
+ err = register_vlan_dev(new_dev);
+ if (err < 0)
goto out_free_newdev;
- lockdep_set_class(&new_dev->_xmit_lock, &vlan_netdev_xmit_lock_key);
-
- new_dev->iflink = real_dev->ifindex;
- vlan_transfer_operstate(real_dev, new_dev);
- linkwatch_fire_event(new_dev); /* _MUST_ call rfc2863_policy() */
-
- /* So, got the sucker initialized, now lets place
- * it into our local structure.
- */
- grp = __vlan_find_group(real_dev->ifindex);
-
- /* Note, we are running under the RTNL semaphore
- * so it cannot "appear" on us.
- */
- if (!grp) { /* need to add a new group */
- grp = kzalloc(sizeof(struct vlan_group), GFP_KERNEL);
- if (!grp)
- goto out_free_unregister;
-
- for (i=0; i < VLAN_GROUP_ARRAY_SPLIT_PARTS; i++) {
- grp->vlan_devices_arrays[i] = kzalloc(
- sizeof(struct net_device *)*VLAN_GROUP_ARRAY_PART_LEN,
- GFP_KERNEL);
-
- if (!grp->vlan_devices_arrays[i])
- goto out_free_arrays;
- }
-
- /* printk(KERN_ALERT "VLAN REGISTER: Allocated new group.\n"); */
- grp->real_dev_ifindex = real_dev->ifindex;
-
- hlist_add_head_rcu(&grp->hlist,
- &vlan_group_hash[vlan_grp_hashfn(real_dev->ifindex)]);
-
- if (real_dev->features & NETIF_F_HW_VLAN_RX)
- real_dev->vlan_rx_register(real_dev, grp);
- }
-
- vlan_group_set_device(grp, VLAN_ID, new_dev);
-
- if (vlan_proc_add_dev(new_dev)<0)/* create it's proc entry */
- printk(KERN_WARNING "VLAN: failed to add proc entry for %s\n",
- new_dev->name);
-
- if (real_dev->features & NETIF_F_HW_VLAN_FILTER)
- real_dev->vlan_rx_add_vid(real_dev, VLAN_ID);
-
- rtnl_unlock();
-
-
+ /* Account for reference in struct vlan_dev_info */
+ dev_hold(real_dev);
#ifdef VLAN_DEBUG
printk(VLAN_DBG "Allocated new device successfully, returning.\n");
#endif
- return new_dev;
-
-out_free_arrays:
- vlan_group_free(grp);
-
-out_free_unregister:
- unregister_netdev(new_dev);
- goto out_unlock;
+ return 0;
out_free_newdev:
free_netdev(new_dev);
+ return err;
+}
-out_unlock:
- rtnl_unlock();
+static void vlan_sync_address(struct net_device *dev,
+ struct net_device *vlandev)
+{
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(vlandev);
-out_put_dev:
- dev_put(real_dev);
+ /* May be called without an actual change */
+ if (!compare_ether_addr(vlan->real_dev_addr, dev->dev_addr))
+ return;
-out_ret_null:
- return NULL;
+ /* vlan address was different from the old address and is equal to
+ * the new address */
+ if (compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
+ !compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
+ dev_unicast_delete(dev, vlandev->dev_addr, ETH_ALEN);
+
+ /* vlan address was equal to the old address and is different from
+ * the new address */
+ if (!compare_ether_addr(vlandev->dev_addr, vlan->real_dev_addr) &&
+ compare_ether_addr(vlandev->dev_addr, dev->dev_addr))
+ dev_unicast_add(dev, vlandev->dev_addr, ETH_ALEN);
+
+ memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}
static int vlan_device_event(struct notifier_block *unused, unsigned long event, void *ptr)
}
break;
+ case NETDEV_CHANGEADDR:
+ /* Adjust unicast filters on underlying device */
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ vlandev = vlan_group_get_device(grp, i);
+ if (!vlandev)
+ continue;
+
+ vlan_sync_address(dev, vlandev);
+ }
+ break;
+
case NETDEV_DOWN:
/* Put all VLANs for this dev in the down state too. */
for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
*/
static int vlan_ioctl_handler(void __user *arg)
{
- int err = 0;
+ int err;
unsigned short vid = 0;
struct vlan_ioctl_args args;
+ struct net_device *dev = NULL;
if (copy_from_user(&args, arg, sizeof(struct vlan_ioctl_args)))
return -EFAULT;
printk(VLAN_DBG "%s: args.cmd: %x\n", __FUNCTION__, args.cmd);
#endif
+ rtnl_lock();
+
+ switch (args.cmd) {
+ case SET_VLAN_INGRESS_PRIORITY_CMD:
+ case SET_VLAN_EGRESS_PRIORITY_CMD:
+ case SET_VLAN_FLAG_CMD:
+ case ADD_VLAN_CMD:
+ case DEL_VLAN_CMD:
+ case GET_VLAN_REALDEV_NAME_CMD:
+ case GET_VLAN_VID_CMD:
+ err = -ENODEV;
+ dev = __dev_get_by_name(args.device1);
+ if (!dev)
+ goto out;
+
+ err = -EINVAL;
+ if (args.cmd != ADD_VLAN_CMD &&
+ !(dev->priv_flags & IFF_802_1Q_VLAN))
+ goto out;
+ }
+
switch (args.cmd) {
case SET_VLAN_INGRESS_PRIORITY_CMD:
+ err = -EPERM;
if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- err = vlan_dev_set_ingress_priority(args.device1,
- args.u.skb_priority,
- args.vlan_qos);
+ break;
+ vlan_dev_set_ingress_priority(dev,
+ args.u.skb_priority,
+ args.vlan_qos);
break;
case SET_VLAN_EGRESS_PRIORITY_CMD:
+ err = -EPERM;
if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- err = vlan_dev_set_egress_priority(args.device1,
+ break;
+ err = vlan_dev_set_egress_priority(dev,
args.u.skb_priority,
args.vlan_qos);
break;
case SET_VLAN_FLAG_CMD:
+ err = -EPERM;
if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- err = vlan_dev_set_vlan_flag(args.device1,
+ break;
+ err = vlan_dev_set_vlan_flag(dev,
args.u.flag,
args.vlan_qos);
break;
case SET_VLAN_NAME_TYPE_CMD:
+ err = -EPERM;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
- if (args.u.name_type < VLAN_NAME_TYPE_HIGHEST) {
+ if ((args.u.name_type >= 0) &&
+ (args.u.name_type < VLAN_NAME_TYPE_HIGHEST)) {
vlan_name_type = args.u.name_type;
err = 0;
} else {
break;
case ADD_VLAN_CMD:
+ err = -EPERM;
if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- /* we have been given the name of the Ethernet Device we want to
- * talk to: args.dev1 We also have the
- * VLAN ID: args.u.VID
- */
- if (register_vlan_device(args.device1, args.u.VID)) {
- err = 0;
- } else {
- err = -EINVAL;
- }
+ break;
+ err = register_vlan_device(dev, args.u.VID);
break;
case DEL_VLAN_CMD:
+ err = -EPERM;
if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- /* Here, the args.dev1 is the actual VLAN we want
- * to get rid of.
- */
- err = unregister_vlan_device(args.device1);
+ break;
+ err = unregister_vlan_device(dev);
break;
case GET_VLAN_INGRESS_PRIORITY_CMD:
err = -EINVAL;
break;
case GET_VLAN_REALDEV_NAME_CMD:
- err = vlan_dev_get_realdev_name(args.device1, args.u.device2);
- if (err)
- goto out;
+ vlan_dev_get_realdev_name(dev, args.u.device2);
if (copy_to_user(arg, &args,
sizeof(struct vlan_ioctl_args))) {
err = -EFAULT;
break;
case GET_VLAN_VID_CMD:
- err = vlan_dev_get_vid(args.device1, &vid);
- if (err)
- goto out;
+ vlan_dev_get_vid(dev, &vid);
args.u.VID = vid;
if (copy_to_user(arg, &args,
sizeof(struct vlan_ioctl_args))) {
/* pass on to underlying device instead?? */
printk(VLAN_DBG "%s: Unknown VLAN CMD: %x \n",
__FUNCTION__, args.cmd);
- return -EINVAL;
+ err = -EINVAL;
+ break;
}
out:
+ rtnl_unlock();
return err;
}
int vlan_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev);
int vlan_dev_hwaccel_hard_start_xmit(struct sk_buff *skb, struct net_device *dev);
int vlan_dev_change_mtu(struct net_device *dev, int new_mtu);
-int vlan_dev_set_mac_address(struct net_device *dev, void* addr);
int vlan_dev_open(struct net_device* dev);
int vlan_dev_stop(struct net_device* dev);
int vlan_dev_ioctl(struct net_device* dev, struct ifreq *ifr, int cmd);
-int vlan_dev_set_ingress_priority(char* dev_name, __u32 skb_prio, short vlan_prio);
-int vlan_dev_set_egress_priority(char* dev_name, __u32 skb_prio, short vlan_prio);
-int vlan_dev_set_vlan_flag(char* dev_name, __u32 flag, short flag_val);
-int vlan_dev_get_realdev_name(const char* dev_name, char* result);
-int vlan_dev_get_vid(const char* dev_name, unsigned short* result);
+void vlan_dev_set_ingress_priority(const struct net_device *dev,
+ u32 skb_prio, short vlan_prio);
+int vlan_dev_set_egress_priority(const struct net_device *dev,
+ u32 skb_prio, short vlan_prio);
+int vlan_dev_set_vlan_flag(const struct net_device *dev,
+ u32 flag, short flag_val);
+void vlan_dev_get_realdev_name(const struct net_device *dev, char *result);
+void vlan_dev_get_vid(const struct net_device *dev, unsigned short *result);
void vlan_dev_set_multicast_list(struct net_device *vlan_dev);
+int vlan_check_real_dev(struct net_device *real_dev, unsigned short vlan_id);
+void vlan_setup(struct net_device *dev);
+int register_vlan_dev(struct net_device *dev);
+int unregister_vlan_device(struct net_device *dev);
+
+int vlan_netlink_init(void);
+void vlan_netlink_fini(void);
+
+extern struct rtnl_link_ops vlan_link_ops;
+
#endif /* !(__BEN_VLAN_802_1Q_INC__) */
static inline struct sk_buff *vlan_check_reorder_header(struct sk_buff *skb)
{
- if (VLAN_DEV_INFO(skb->dev)->flags & 1) {
+ if (VLAN_DEV_INFO(skb->dev)->flags & VLAN_FLAG_REORDER_HDR) {
if (skb_shared(skb) || skb_cloned(skb)) {
struct sk_buff *nskb = skb_copy(skb, GFP_ATOMIC);
kfree_skb(skb);
* header shuffling in the hard_start_xmit. Users can turn off this
* REORDER behaviour with the vconfig tool.
*/
- build_vlan_header = ((VLAN_DEV_INFO(dev)->flags & 1) == 0);
+ if (!(VLAN_DEV_INFO(dev)->flags & VLAN_FLAG_REORDER_HDR))
+ build_vlan_header = 1;
if (build_vlan_header) {
vhdr = (struct vlan_hdr *) skb_push(skb, VLAN_HLEN);
return 0;
}
-int vlan_dev_set_ingress_priority(char *dev_name, __u32 skb_prio, short vlan_prio)
+void vlan_dev_set_ingress_priority(const struct net_device *dev,
+ u32 skb_prio, short vlan_prio)
{
- struct net_device *dev = dev_get_by_name(dev_name);
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- /* see if a priority mapping exists.. */
- VLAN_DEV_INFO(dev)->ingress_priority_map[vlan_prio & 0x7] = skb_prio;
- dev_put(dev);
- return 0;
- }
+ if (vlan->ingress_priority_map[vlan_prio & 0x7] && !skb_prio)
+ vlan->nr_ingress_mappings--;
+ else if (!vlan->ingress_priority_map[vlan_prio & 0x7] && skb_prio)
+ vlan->nr_ingress_mappings++;
- dev_put(dev);
- }
- return -EINVAL;
+ vlan->ingress_priority_map[vlan_prio & 0x7] = skb_prio;
}
-int vlan_dev_set_egress_priority(char *dev_name, __u32 skb_prio, short vlan_prio)
+int vlan_dev_set_egress_priority(const struct net_device *dev,
+ u32 skb_prio, short vlan_prio)
{
- struct net_device *dev = dev_get_by_name(dev_name);
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
struct vlan_priority_tci_mapping *mp = NULL;
struct vlan_priority_tci_mapping *np;
+ u32 vlan_qos = (vlan_prio << 13) & 0xE000;
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- /* See if a priority mapping exists.. */
- mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF];
- while (mp) {
- if (mp->priority == skb_prio) {
- mp->vlan_qos = ((vlan_prio << 13) & 0xE000);
- dev_put(dev);
- return 0;
- }
- mp = mp->next;
- }
-
- /* Create a new mapping then. */
- mp = VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF];
- np = kmalloc(sizeof(struct vlan_priority_tci_mapping), GFP_KERNEL);
- if (np) {
- np->next = mp;
- np->priority = skb_prio;
- np->vlan_qos = ((vlan_prio << 13) & 0xE000);
- VLAN_DEV_INFO(dev)->egress_priority_map[skb_prio & 0xF] = np;
- dev_put(dev);
- return 0;
- } else {
- dev_put(dev);
- return -ENOBUFS;
- }
- }
- dev_put(dev);
- }
- return -EINVAL;
-}
-
-/* Flags are defined in the vlan_dev_info class in include/linux/if_vlan.h file. */
-int vlan_dev_set_vlan_flag(char *dev_name, __u32 flag, short flag_val)
-{
- struct net_device *dev = dev_get_by_name(dev_name);
-
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- /* verify flag is supported */
- if (flag == 1) {
- if (flag_val) {
- VLAN_DEV_INFO(dev)->flags |= 1;
- } else {
- VLAN_DEV_INFO(dev)->flags &= ~1;
- }
- dev_put(dev);
- return 0;
- } else {
- printk(KERN_ERR "%s: flag %i is not valid.\n",
- __FUNCTION__, (int)(flag));
- dev_put(dev);
- return -EINVAL;
- }
- } else {
- printk(KERN_ERR
- "%s: %s is not a vlan device, priv_flags: %hX.\n",
- __FUNCTION__, dev->name, dev->priv_flags);
- dev_put(dev);
+ /* See if a priority mapping exists.. */
+ mp = vlan->egress_priority_map[skb_prio & 0xF];
+ while (mp) {
+ if (mp->priority == skb_prio) {
+ if (mp->vlan_qos && !vlan_qos)
+ vlan->nr_egress_mappings--;
+ else if (!mp->vlan_qos && vlan_qos)
+ vlan->nr_egress_mappings++;
+ mp->vlan_qos = vlan_qos;
+ return 0;
}
- } else {
- printk(KERN_ERR "%s: Could not find device: %s\n",
- __FUNCTION__, dev_name);
+ mp = mp->next;
}
- return -EINVAL;
+ /* Create a new mapping then. */
+ mp = vlan->egress_priority_map[skb_prio & 0xF];
+ np = kmalloc(sizeof(struct vlan_priority_tci_mapping), GFP_KERNEL);
+ if (!np)
+ return -ENOBUFS;
+
+ np->next = mp;
+ np->priority = skb_prio;
+ np->vlan_qos = vlan_qos;
+ vlan->egress_priority_map[skb_prio & 0xF] = np;
+ if (vlan_qos)
+ vlan->nr_egress_mappings++;
+ return 0;
}
-
-int vlan_dev_get_realdev_name(const char *dev_name, char* result)
+/* Flags are defined in the vlan_flags enum in include/linux/if_vlan.h file. */
+int vlan_dev_set_vlan_flag(const struct net_device *dev,
+ u32 flag, short flag_val)
{
- struct net_device *dev = dev_get_by_name(dev_name);
- int rv = 0;
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- strncpy(result, VLAN_DEV_INFO(dev)->real_dev->name, 23);
- rv = 0;
+ /* verify flag is supported */
+ if (flag == VLAN_FLAG_REORDER_HDR) {
+ if (flag_val) {
+ VLAN_DEV_INFO(dev)->flags |= VLAN_FLAG_REORDER_HDR;
} else {
- rv = -EINVAL;
+ VLAN_DEV_INFO(dev)->flags &= ~VLAN_FLAG_REORDER_HDR;
}
- dev_put(dev);
- } else {
- rv = -ENODEV;
+ return 0;
}
- return rv;
+ printk(KERN_ERR "%s: flag %i is not valid.\n", __FUNCTION__, flag);
+ return -EINVAL;
}
-int vlan_dev_get_vid(const char *dev_name, unsigned short* result)
+void vlan_dev_get_realdev_name(const struct net_device *dev, char *result)
{
- struct net_device *dev = dev_get_by_name(dev_name);
- int rv = 0;
- if (dev) {
- if (dev->priv_flags & IFF_802_1Q_VLAN) {
- *result = VLAN_DEV_INFO(dev)->vlan_id;
- rv = 0;
- } else {
- rv = -EINVAL;
- }
- dev_put(dev);
- } else {
- rv = -ENODEV;
- }
- return rv;
+ strncpy(result, VLAN_DEV_INFO(dev)->real_dev->name, 23);
}
-
-int vlan_dev_set_mac_address(struct net_device *dev, void *addr_struct_p)
+void vlan_dev_get_vid(const struct net_device *dev, unsigned short *result)
{
- struct sockaddr *addr = (struct sockaddr *)(addr_struct_p);
- int i;
-
- if (netif_running(dev))
- return -EBUSY;
-
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-
- printk("%s: Setting MAC address to ", dev->name);
- for (i = 0; i < 6; i++)
- printk(" %2.2x", dev->dev_addr[i]);
- printk(".\n");
-
- if (memcmp(VLAN_DEV_INFO(dev)->real_dev->dev_addr,
- dev->dev_addr,
- dev->addr_len) != 0) {
- if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_PROMISC)) {
- int flgs = VLAN_DEV_INFO(dev)->real_dev->flags;
-
- /* Increment our in-use promiscuity counter */
- dev_set_promiscuity(VLAN_DEV_INFO(dev)->real_dev, 1);
-
- /* Make PROMISC visible to the user. */
- flgs |= IFF_PROMISC;
- printk("VLAN (%s): Setting underlying device (%s) to promiscious mode.\n",
- dev->name, VLAN_DEV_INFO(dev)->real_dev->name);
- dev_change_flags(VLAN_DEV_INFO(dev)->real_dev, flgs);
- }
- } else {
- printk("VLAN (%s): Underlying device (%s) has same MAC, not checking promiscious mode.\n",
- dev->name, VLAN_DEV_INFO(dev)->real_dev->name);
- }
-
- return 0;
+ *result = VLAN_DEV_INFO(dev)->vlan_id;
}
static inline int vlan_dmi_equals(struct dev_mc_list *dmi1,
int vlan_dev_open(struct net_device *dev)
{
- if (!(VLAN_DEV_INFO(dev)->real_dev->flags & IFF_UP))
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
+ struct net_device *real_dev = vlan->real_dev;
+ int err;
+
+ if (!(real_dev->flags & IFF_UP))
return -ENETDOWN;
+ if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr)) {
+ err = dev_unicast_add(real_dev, dev->dev_addr, ETH_ALEN);
+ if (err < 0)
+ return err;
+ }
+ memcpy(vlan->real_dev_addr, real_dev->dev_addr, ETH_ALEN);
+
return 0;
}
int vlan_dev_stop(struct net_device *dev)
{
+ struct net_device *real_dev = VLAN_DEV_INFO(dev)->real_dev;
+
vlan_flush_mc_list(dev);
+
+ if (compare_ether_addr(dev->dev_addr, real_dev->dev_addr))
+ dev_unicast_delete(real_dev, dev->dev_addr, dev->addr_len);
+
return 0;
}
--- /dev/null
+/*
+ * VLAN netlink control interface
+ *
+ * Copyright (c) 2007 Patrick McHardy <kaber@trash.net>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/if_vlan.h>
+#include <net/netlink.h>
+#include <net/rtnetlink.h>
+#include "vlan.h"
+
+
+static const struct nla_policy vlan_policy[IFLA_VLAN_MAX + 1] = {
+ [IFLA_VLAN_ID] = { .type = NLA_U16 },
+ [IFLA_VLAN_FLAGS] = { .len = sizeof(struct ifla_vlan_flags) },
+ [IFLA_VLAN_EGRESS_QOS] = { .type = NLA_NESTED },
+ [IFLA_VLAN_INGRESS_QOS] = { .type = NLA_NESTED },
+};
+
+static const struct nla_policy vlan_map_policy[IFLA_VLAN_QOS_MAX + 1] = {
+ [IFLA_VLAN_QOS_MAPPING] = { .len = sizeof(struct ifla_vlan_qos_mapping) },
+};
+
+
+static inline int vlan_validate_qos_map(struct nlattr *attr)
+{
+ if (!attr)
+ return 0;
+ return nla_validate_nested(attr, IFLA_VLAN_QOS_MAX, vlan_map_policy);
+}
+
+static int vlan_validate(struct nlattr *tb[], struct nlattr *data[])
+{
+ struct ifla_vlan_flags *flags;
+ u16 id;
+ int err;
+
+ if (tb[IFLA_ADDRESS]) {
+ if (nla_len(tb[IFLA_ADDRESS]) != ETH_ALEN)
+ return -EINVAL;
+ if (!is_valid_ether_addr(nla_data(tb[IFLA_ADDRESS])))
+ return -EADDRNOTAVAIL;
+ }
+
+ if (!data)
+ return -EINVAL;
+
+ if (data[IFLA_VLAN_ID]) {
+ id = nla_get_u16(data[IFLA_VLAN_ID]);
+ if (id >= VLAN_VID_MASK)
+ return -ERANGE;
+ }
+ if (data[IFLA_VLAN_FLAGS]) {
+ flags = nla_data(data[IFLA_VLAN_FLAGS]);
+ if ((flags->flags & flags->mask) & ~VLAN_FLAG_REORDER_HDR)
+ return -EINVAL;
+ }
+
+ err = vlan_validate_qos_map(data[IFLA_VLAN_INGRESS_QOS]);
+ if (err < 0)
+ return err;
+ err = vlan_validate_qos_map(data[IFLA_VLAN_EGRESS_QOS]);
+ if (err < 0)
+ return err;
+ return 0;
+}
+
+static int vlan_changelink(struct net_device *dev,
+ struct nlattr *tb[], struct nlattr *data[])
+{
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
+ struct ifla_vlan_flags *flags;
+ struct ifla_vlan_qos_mapping *m;
+ struct nlattr *attr;
+ int rem;
+
+ if (data[IFLA_VLAN_FLAGS]) {
+ flags = nla_data(data[IFLA_VLAN_FLAGS]);
+ vlan->flags = (vlan->flags & ~flags->mask) |
+ (flags->flags & flags->mask);
+ }
+ if (data[IFLA_VLAN_INGRESS_QOS]) {
+ nla_for_each_nested(attr, data[IFLA_VLAN_INGRESS_QOS], rem) {
+ m = nla_data(attr);
+ vlan_dev_set_ingress_priority(dev, m->to, m->from);
+ }
+ }
+ if (data[IFLA_VLAN_EGRESS_QOS]) {
+ nla_for_each_nested(attr, data[IFLA_VLAN_EGRESS_QOS], rem) {
+ m = nla_data(attr);
+ vlan_dev_set_egress_priority(dev, m->from, m->to);
+ }
+ }
+ return 0;
+}
+
+static int vlan_newlink(struct net_device *dev,
+ struct nlattr *tb[], struct nlattr *data[])
+{
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
+ struct net_device *real_dev;
+ int err;
+
+ if (!data[IFLA_VLAN_ID])
+ return -EINVAL;
+
+ if (!tb[IFLA_LINK])
+ return -EINVAL;
+ real_dev = __dev_get_by_index(nla_get_u32(tb[IFLA_LINK]));
+ if (!real_dev)
+ return -ENODEV;
+
+ vlan->vlan_id = nla_get_u16(data[IFLA_VLAN_ID]);
+ vlan->real_dev = real_dev;
+ vlan->flags = VLAN_FLAG_REORDER_HDR;
+
+ err = vlan_check_real_dev(real_dev, vlan->vlan_id);
+ if (err < 0)
+ return err;
+
+ if (!tb[IFLA_MTU])
+ dev->mtu = real_dev->mtu;
+ else if (dev->mtu > real_dev->mtu)
+ return -EINVAL;
+
+ err = vlan_changelink(dev, tb, data);
+ if (err < 0)
+ return err;
+
+ return register_vlan_dev(dev);
+}
+
+static void vlan_dellink(struct net_device *dev)
+{
+ unregister_vlan_device(dev);
+}
+
+static inline size_t vlan_qos_map_size(unsigned int n)
+{
+ if (n == 0)
+ return 0;
+ /* IFLA_VLAN_{EGRESS,INGRESS}_QOS + n * IFLA_VLAN_QOS_MAPPING */
+ return nla_total_size(sizeof(struct nlattr)) +
+ nla_total_size(sizeof(struct ifla_vlan_qos_mapping)) * n;
+}
+
+static size_t vlan_get_size(const struct net_device *dev)
+{
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
+
+ return nla_total_size(2) + /* IFLA_VLAN_ID */
+ vlan_qos_map_size(vlan->nr_ingress_mappings) +
+ vlan_qos_map_size(vlan->nr_egress_mappings);
+}
+
+static int vlan_fill_info(struct sk_buff *skb, const struct net_device *dev)
+{
+ struct vlan_dev_info *vlan = VLAN_DEV_INFO(dev);
+ struct vlan_priority_tci_mapping *pm;
+ struct ifla_vlan_flags f;
+ struct ifla_vlan_qos_mapping m;
+ struct nlattr *nest;
+ unsigned int i;
+
+ NLA_PUT_U16(skb, IFLA_VLAN_ID, VLAN_DEV_INFO(dev)->vlan_id);
+ if (vlan->flags) {
+ f.flags = vlan->flags;
+ f.mask = ~0;
+ NLA_PUT(skb, IFLA_VLAN_FLAGS, sizeof(f), &f);
+ }
+ if (vlan->nr_ingress_mappings) {
+ nest = nla_nest_start(skb, IFLA_VLAN_INGRESS_QOS);
+ if (nest == NULL)
+ goto nla_put_failure;
+
+ for (i = 0; i < ARRAY_SIZE(vlan->ingress_priority_map); i++) {
+ if (!vlan->ingress_priority_map[i])
+ continue;
+
+ m.from = i;
+ m.to = vlan->ingress_priority_map[i];
+ NLA_PUT(skb, IFLA_VLAN_QOS_MAPPING,
+ sizeof(m), &m);
+ }
+ nla_nest_end(skb, nest);
+ }
+
+ if (vlan->nr_egress_mappings) {
+ nest = nla_nest_start(skb, IFLA_VLAN_EGRESS_QOS);
+ if (nest == NULL)
+ goto nla_put_failure;
+
+ for (i = 0; i < ARRAY_SIZE(vlan->egress_priority_map); i++) {
+ for (pm = vlan->egress_priority_map[i]; pm;
+ pm = pm->next) {
+ if (!pm->vlan_qos)
+ continue;
+
+ m.from = pm->priority;
+ m.to = (pm->vlan_qos >> 13) & 0x7;
+ NLA_PUT(skb, IFLA_VLAN_QOS_MAPPING,
+ sizeof(m), &m);
+ }
+ }
+ nla_nest_end(skb, nest);
+ }
+ return 0;
+
+nla_put_failure:
+ return -EMSGSIZE;
+}
+
+struct rtnl_link_ops vlan_link_ops __read_mostly = {
+ .kind = "vlan",
+ .maxtype = IFLA_VLAN_MAX,
+ .policy = vlan_policy,
+ .priv_size = sizeof(struct vlan_dev_info),
+ .setup = vlan_setup,
+ .validate = vlan_validate,
+ .newlink = vlan_newlink,
+ .changelink = vlan_changelink,
+ .dellink = vlan_dellink,
+ .get_size = vlan_get_size,
+ .fill_info = vlan_fill_info,
+};
+
+int __init vlan_netlink_init(void)
+{
+ return rtnl_link_register(&vlan_link_ops);
+}
+
+void __exit vlan_netlink_fini(void)
+{
+ rtnl_link_unregister(&vlan_link_ops);
+}
+
+MODULE_ALIAS_RTNL_LINK("vlan");
* Generic /proc/net/vlan/<file> file and inode operations
*/
-static struct seq_operations vlan_seq_ops = {
+static const struct seq_operations vlan_seq_ops = {
.start = vlan_seq_start,
.next = vlan_seq_next,
.stop = vlan_seq_stop,
seq_printf(seq, "Device: %s", dev_info->real_dev->name);
/* now show all PRIORITY mappings relating to this VLAN */
seq_printf(seq,
- "\nINGRESS priority mappings: 0:%lu 1:%lu 2:%lu 3:%lu 4:%lu 5:%lu 6:%lu 7:%lu\n",
+ "\nINGRESS priority mappings: 0:%u 1:%u 2:%u 3:%u 4:%u 5:%u 6:%u 7:%u\n",
dev_info->ingress_priority_map[0],
dev_info->ingress_priority_map[1],
dev_info->ingress_priority_map[2],
const struct vlan_priority_tci_mapping *mp
= dev_info->egress_priority_map[i];
while (mp) {
- seq_printf(seq, "%lu:%hu ",
+ seq_printf(seq, "%u:%hu ",
mp->priority, ((mp->vlan_qos >> 13) & 0x7));
mp = mp->next;
}
obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_BT) += bluetooth/
obj-$(CONFIG_SUNRPC) += sunrpc/
-obj-$(CONFIG_RXRPC) += rxrpc/
obj-$(CONFIG_AF_RXRPC) += rxrpc/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_DECNET) += decnet/
return 0;
}
-static struct seq_operations aarp_seq_ops = {
+static const struct seq_operations aarp_seq_ops = {
.start = aarp_seq_start,
.next = aarp_seq_next,
.stop = aarp_seq_stop,
return 0;
}
-static struct seq_operations atalk_seq_interface_ops = {
+static const struct seq_operations atalk_seq_interface_ops = {
.start = atalk_seq_interface_start,
.next = atalk_seq_interface_next,
.stop = atalk_seq_interface_stop,
.show = atalk_seq_interface_show,
};
-static struct seq_operations atalk_seq_route_ops = {
+static const struct seq_operations atalk_seq_route_ops = {
.start = atalk_seq_route_start,
.next = atalk_seq_route_next,
.stop = atalk_seq_route_stop,
.show = atalk_seq_route_show,
};
-static struct seq_operations atalk_seq_socket_ops = {
+static const struct seq_operations atalk_seq_socket_ops = {
.start = atalk_seq_socket_start,
.next = atalk_seq_socket_next,
.stop = atalk_seq_socket_stop,
#ifdef CONFIG_PROC_FS
static void *br2684_seq_start(struct seq_file *seq, loff_t *pos)
{
- loff_t offs = 0;
- struct br2684_dev *brd;
-
read_lock(&devs_lock);
-
- list_for_each_entry(brd, &br2684_devs, br2684_devs) {
- if (offs == *pos)
- return brd;
- ++offs;
- }
- return NULL;
+ return seq_list_start(&br2684_devs, *pos);
}
static void *br2684_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
- struct br2684_dev *brd = v;
-
- ++*pos;
-
- brd = list_entry(brd->br2684_devs.next,
- struct br2684_dev, br2684_devs);
- return (&brd->br2684_devs != &br2684_devs) ? brd : NULL;
+ return seq_list_next(v, &br2684_devs, pos);
}
static void br2684_seq_stop(struct seq_file *seq, void *v)
static int br2684_seq_show(struct seq_file *seq, void *v)
{
- const struct br2684_dev *brdev = v;
+ const struct br2684_dev *brdev = list_entry(v, struct br2684_dev,
+ br2684_devs);
const struct net_device *net_dev = brdev->net_dev;
const struct br2684_vcc *brvcc;
return 0;
}
-static struct seq_operations br2684_seq_ops = {
+static const struct seq_operations br2684_seq_ops = {
.start = br2684_seq_start,
.next = br2684_seq_next,
.stop = br2684_seq_stop,
return 0;
}
-static struct seq_operations arp_seq_ops = {
+static const struct seq_operations arp_seq_ops = {
.start = clip_seq_start,
.next = neigh_seq_next,
.stop = neigh_seq_stop,
return 0;
}
-static struct seq_operations lec_seq_ops = {
+static const struct seq_operations lec_seq_ops = {
.start = lec_seq_start,
.next = lec_seq_next,
.stop = lec_seq_stop,
return 0;
}
-static struct seq_operations mpc_op = {
+static const struct seq_operations mpc_op = {
.start = mpc_start,
.next = mpc_next,
.stop = mpc_stop,
return 0;
}
-static struct seq_operations atm_dev_seq_ops = {
+static const struct seq_operations atm_dev_seq_ops = {
.start = atm_dev_seq_start,
.next = atm_dev_seq_next,
.stop = atm_dev_seq_stop,
return 0;
}
-static struct seq_operations pvc_seq_ops = {
+static const struct seq_operations pvc_seq_ops = {
.start = vcc_seq_start,
.next = vcc_seq_next,
.stop = vcc_seq_stop,
return 0;
}
-static struct seq_operations vcc_seq_ops = {
+static const struct seq_operations vcc_seq_ops = {
.start = vcc_seq_start,
.next = vcc_seq_next,
.stop = vcc_seq_stop,
return 0;
}
-static struct seq_operations svc_seq_ops = {
+static const struct seq_operations svc_seq_ops = {
.start = vcc_seq_start,
.next = vcc_seq_next,
.stop = vcc_seq_stop,
return 0;
}
-static struct seq_operations ax25_info_seqops = {
+static const struct seq_operations ax25_info_seqops = {
.start = ax25_info_start,
.next = ax25_info_next,
.stop = ax25_info_stop,
return 0;
}
-static struct seq_operations ax25_rt_seqops = {
+static const struct seq_operations ax25_rt_seqops = {
.start = ax25_rt_seq_start,
.next = ax25_rt_seq_next,
.stop = ax25_rt_seq_stop,
return 0;
}
-static struct seq_operations ax25_uid_seqops = {
+static const struct seq_operations ax25_uid_seqops = {
.start = ax25_uid_seq_start,
.next = ax25_uid_seq_next,
.stop = ax25_uid_seq_stop,
conn->state = BT_CONNECT;
conn->out = 1;
- cp.pkt_type = cpu_to_le16(hdev->pkt_type & SCO_PTYPE_MASK);
cp.handle = cpu_to_le16(handle);
+ cp.pkt_type = cpu_to_le16(hdev->pkt_type & SCO_PTYPE_MASK);
hci_send_cmd(hdev, OGF_LINK_CTL, OCF_ADD_SCO, sizeof(cp), &cp);
}
del_timer(&conn->disc_timer);
- if (conn->type == SCO_LINK) {
- struct hci_conn *acl = conn->link;
- if (acl) {
- acl->link = NULL;
- hci_conn_put(acl);
- }
- } else {
+ if (conn->type == ACL_LINK) {
struct hci_conn *sco = conn->link;
if (sco)
sco->link = NULL;
/* Unacked frames */
hdev->acl_cnt += conn->sent;
+ } else {
+ struct hci_conn *acl = conn->link;
+ if (acl) {
+ acl->link = NULL;
+ hci_conn_put(acl);
+ }
}
tasklet_disable(&hdev->tx_task);
/* Create SCO or ACL connection.
* Device _must_ be locked */
-struct hci_conn * hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst)
+struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst)
{
struct hci_conn *acl;
+ struct hci_conn *sco;
BT_DBG("%s dst %s", hdev->name, batostr(dst));
if (acl->state == BT_OPEN || acl->state == BT_CLOSED)
hci_acl_connect(acl);
- if (type == SCO_LINK) {
- struct hci_conn *sco;
+ if (type == ACL_LINK)
+ return acl;
- if (!(sco = hci_conn_hash_lookup_ba(hdev, SCO_LINK, dst))) {
- if (!(sco = hci_conn_add(hdev, SCO_LINK, dst))) {
- hci_conn_put(acl);
- return NULL;
- }
+ if (!(sco = hci_conn_hash_lookup_ba(hdev, type, dst))) {
+ if (!(sco = hci_conn_add(hdev, type, dst))) {
+ hci_conn_put(acl);
+ return NULL;
}
- acl->link = sco;
- sco->link = acl;
+ }
- hci_conn_hold(sco);
+ acl->link = sco;
+ sco->link = acl;
- if (acl->state == BT_CONNECTED &&
- (sco->state == BT_OPEN || sco->state == BT_CLOSED))
- hci_add_sco(sco, acl->handle);
+ hci_conn_hold(sco);
- return sco;
- } else {
- return acl;
- }
+ if (acl->state == BT_CONNECTED &&
+ (sco->state == BT_OPEN || sco->state == BT_CLOSED))
+ hci_add_sco(sco, acl->handle);
+
+ return sco;
}
EXPORT_SYMBOL(hci_connect);
int hci_register_dev(struct hci_dev *hdev)
{
struct list_head *head = &hci_dev_list, *p;
- int id = 0;
+ int i, id = 0;
BT_DBG("%p name %s type %d owner %p", hdev, hdev->name, hdev->type, hdev->owner);
hdev->flags = 0;
hdev->pkt_type = (HCI_DM1 | HCI_DH1 | HCI_HV1);
+ hdev->esco_type = (ESCO_HV1);
hdev->link_mode = (HCI_LM_ACCEPT);
hdev->idle_timeout = 0;
skb_queue_head_init(&hdev->cmd_q);
skb_queue_head_init(&hdev->raw_q);
+ for (i = 0; i < 3; i++)
+ hdev->reassembly[i] = NULL;
+
init_waitqueue_head(&hdev->req_wait_q);
init_MUTEX(&hdev->req_lock);
/* Unregister HCI device */
int hci_unregister_dev(struct hci_dev *hdev)
{
+ int i;
+
BT_DBG("%p name %s type %d", hdev, hdev->name, hdev->type);
hci_unregister_sysfs(hdev);
hci_dev_do_close(hdev);
+ for (i = 0; i < 3; i++)
+ kfree_skb(hdev->reassembly[i]);
+
hci_notify(hdev, HCI_DEV_UNREG);
__hci_dev_put(hdev);
+
return 0;
}
EXPORT_SYMBOL(hci_unregister_dev);
}
EXPORT_SYMBOL(hci_resume_dev);
+/* Receive packet type fragment */
+#define __reassembly(hdev, type) ((hdev)->reassembly[(type) - 2])
+
+int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count)
+{
+ if (type < HCI_ACLDATA_PKT || type > HCI_EVENT_PKT)
+ return -EILSEQ;
+
+ while (count) {
+ struct sk_buff *skb = __reassembly(hdev, type);
+ struct { int expect; } *scb;
+ int len = 0;
+
+ if (!skb) {
+ /* Start of the frame */
+
+ switch (type) {
+ case HCI_EVENT_PKT:
+ if (count >= HCI_EVENT_HDR_SIZE) {
+ struct hci_event_hdr *h = data;
+ len = HCI_EVENT_HDR_SIZE + h->plen;
+ } else
+ return -EILSEQ;
+ break;
+
+ case HCI_ACLDATA_PKT:
+ if (count >= HCI_ACL_HDR_SIZE) {
+ struct hci_acl_hdr *h = data;
+ len = HCI_ACL_HDR_SIZE + __le16_to_cpu(h->dlen);
+ } else
+ return -EILSEQ;
+ break;
+
+ case HCI_SCODATA_PKT:
+ if (count >= HCI_SCO_HDR_SIZE) {
+ struct hci_sco_hdr *h = data;
+ len = HCI_SCO_HDR_SIZE + h->dlen;
+ } else
+ return -EILSEQ;
+ break;
+ }
+
+ skb = bt_skb_alloc(len, GFP_ATOMIC);
+ if (!skb) {
+ BT_ERR("%s no memory for packet", hdev->name);
+ return -ENOMEM;
+ }
+
+ skb->dev = (void *) hdev;
+ bt_cb(skb)->pkt_type = type;
+
+ __reassembly(hdev, type) = skb;
+
+ scb = (void *) skb->cb;
+ scb->expect = len;
+ } else {
+ /* Continuation */
+
+ scb = (void *) skb->cb;
+ len = scb->expect;
+ }
+
+ len = min(len, count);
+
+ memcpy(skb_put(skb, len), data, len);
+
+ scb->expect -= len;
+
+ if (scb->expect == 0) {
+ /* Complete frame */
+
+ __reassembly(hdev, type) = NULL;
+
+ bt_cb(skb)->pkt_type = type;
+ hci_recv_frame(skb);
+ }
+
+ count -= len; data += len;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(hci_recv_fragment);
+
/* ---- Interface to upper protocols ---- */
/* Register/Unregister protocols.
skb = bt_skb_alloc(len, GFP_ATOMIC);
if (!skb) {
- BT_ERR("%s Can't allocate memory for HCI command", hdev->name);
+ BT_ERR("%s no memory for command", hdev->name);
return -ENOMEM;
}
static inline struct hci_conn *hci_low_sent(struct hci_dev *hdev, __u8 type, int *quote)
{
struct hci_conn_hash *h = &hdev->conn_hash;
- struct hci_conn *conn = NULL;
+ struct hci_conn *conn = NULL;
int num = 0, min = ~0;
struct list_head *p;
if (hdev->features[0] & LMP_5SLOT)
hdev->pkt_type |= (HCI_DM5 | HCI_DH5);
- if (hdev->features[1] & LMP_HV2)
- hdev->pkt_type |= (HCI_HV2);
+ if (hdev->features[1] & LMP_HV2) {
+ hdev->pkt_type |= (HCI_HV2);
+ hdev->esco_type |= (ESCO_HV2);
+ }
+
+ if (hdev->features[1] & LMP_HV3) {
+ hdev->pkt_type |= (HCI_HV3);
+ hdev->esco_type |= (ESCO_HV3);
+ }
- if (hdev->features[1] & LMP_HV3)
- hdev->pkt_type |= (HCI_HV3);
+ if (hdev->features[3] & LMP_ESCO)
+ hdev->esco_type |= (ESCO_EV3);
+
+ if (hdev->features[4] & LMP_EV4)
+ hdev->esco_type |= (ESCO_EV4);
+
+ if (hdev->features[4] & LMP_EV5)
+ hdev->esco_type |= (ESCO_EV5);
BT_DBG("%s: features 0x%x 0x%x 0x%x", hdev->name,
lf->features[0], lf->features[1], lf->features[2]);
if (conn) {
conn->sent -= count;
- if (conn->type == SCO_LINK) {
- if ((hdev->sco_cnt += count) > hdev->sco_pkts)
- hdev->sco_cnt = hdev->sco_pkts;
- } else {
+ if (conn->type == ACL_LINK) {
if ((hdev->acl_cnt += count) > hdev->acl_pkts)
hdev->acl_cnt = hdev->acl_pkts;
+ } else {
+ if ((hdev->sco_cnt += count) > hdev->sco_pkts)
+ hdev->sco_cnt = hdev->sco_pkts;
}
}
}
BT_DBG("dev %p dlc %p", dev, dlc);
+ write_lock_bh(&rfcomm_dev_lock);
+ list_del_init(&dev->list);
+ write_unlock_bh(&rfcomm_dev_lock);
+
rfcomm_dlc_lock(dlc);
/* Detach DLC if it's owned by this dev */
if (dlc->owner == dev)
read_lock(&rfcomm_dev_lock);
dev = __rfcomm_dev_get(id);
- if (dev)
- rfcomm_dev_hold(dev);
+
+ if (dev) {
+ if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags))
+ dev = NULL;
+ else
+ rfcomm_dev_hold(dev);
+ }
read_unlock(&rfcomm_dev_lock);
dev->tty_dev = tty_register_device(rfcomm_tty_driver, dev->id, NULL);
+ if (IS_ERR(dev->tty_dev)) {
+ list_del(&dev->list);
+ kfree(dev);
+ return PTR_ERR(dev->tty_dev);
+ }
+
return dev->id;
}
{
BT_DBG("dev %p", dev);
- write_lock_bh(&rfcomm_dev_lock);
- list_del_init(&dev->list);
- write_unlock_bh(&rfcomm_dev_lock);
-
+ set_bit(RFCOMM_TTY_RELEASED, &dev->flags);
rfcomm_dev_put(dev);
}
if (copy_from_user(&req, arg, sizeof(req)))
return -EFAULT;
- BT_DBG("sk %p dev_id %id flags 0x%x", sk, req.dev_id, req.flags);
+ BT_DBG("sk %p dev_id %d flags 0x%x", sk, req.dev_id, req.flags);
if (req.flags != NOCAP_FLAGS && !capable(CAP_NET_ADMIN))
return -EPERM;
if (copy_from_user(&req, arg, sizeof(req)))
return -EFAULT;
- BT_DBG("dev_id %id flags 0x%x", req.dev_id, req.flags);
+ BT_DBG("dev_id %d flags 0x%x", req.dev_id, req.flags);
if (!(dev = rfcomm_dev_get(req.dev_id)))
return -ENODEV;
if (req.flags & (1 << RFCOMM_HANGUP_NOW))
rfcomm_dlc_close(dev->dlc, 0);
+ /* Shut down TTY synchronously before freeing rfcomm_dev */
+ if (dev->tty)
+ tty_vhangup(dev->tty);
+
rfcomm_dev_del(dev);
rfcomm_dev_put(dev);
return 0;
list_for_each(p, &rfcomm_dev_list) {
struct rfcomm_dev *dev = list_entry(p, struct rfcomm_dev, list);
+ if (test_bit(RFCOMM_TTY_RELEASED, &dev->flags))
+ continue;
(di + n)->id = dev->id;
(di + n)->flags = dev->flags;
(di + n)->state = dev->dlc->state;
list_for_each_entry(p, &br->port_list, list) {
unsigned long feature = p->dev->features;
+ /* if device needs checksumming, downgrade to hw checksumming */
if (checksum & NETIF_F_NO_CSUM && !(feature & NETIF_F_NO_CSUM))
checksum ^= NETIF_F_NO_CSUM | NETIF_F_HW_CSUM;
+
+ /* if device can't do all checksum, downgrade to ipv4/ipv6 */
if (checksum & NETIF_F_HW_CSUM && !(feature & NETIF_F_HW_CSUM))
- checksum ^= NETIF_F_HW_CSUM | NETIF_F_IP_CSUM;
+ checksum ^= NETIF_F_HW_CSUM
+ | NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
+
+ if (checksum & NETIF_F_IPV6_CSUM && !(feature & NETIF_F_IPV6_CSUM))
+ checksum &= ~NETIF_F_IPV6_CSUM;
+
if (!(feature & NETIF_F_IP_CSUM))
checksum = 0;
*
* Returns the number of bytes read.
*/
-static ssize_t brforward_read(struct kobject *kobj, char *buf,
- loff_t off, size_t count)
+static ssize_t brforward_read(struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
{
struct device *dev = to_dev(kobj);
struct net_bridge *br = to_bridge(dev);
static struct bin_attribute bridge_forward = {
.attr = { .name = SYSFS_BRIDGE_FDB,
- .mode = S_IRUGO,
- .owner = THIS_MODULE, },
+ .mode = S_IRUGO, },
.read = brforward_read,
};
#define BRPORT_ATTR(_name,_mode,_show,_store) \
struct brport_attribute brport_attr_##_name = { \
.attr = {.name = __stringify(_name), \
- .mode = _mode, \
- .owner = THIS_MODULE, }, \
+ .mode = _mode }, \
.show = _show, \
.store = _store, \
};
/*
* Initialize multicasting status
*/
- dev_mc_upload(dev);
+ dev_set_rx_mode(dev);
/*
* Wakeup transmit queue engine
skb->next = nskb;
return rc;
}
- if (unlikely(netif_queue_stopped(dev) && skb->next))
+ if (unlikely((netif_queue_stopped(dev) ||
+ netif_subqueue_stopped(dev, skb->queue_mapping)) &&
+ skb->next))
return NETDEV_TX_BUSY;
} while (skb->next);
skb_headroom(skb));
if (!(dev->features & NETIF_F_GEN_CSUM) &&
- (!(dev->features & NETIF_F_IP_CSUM) ||
- skb->protocol != htons(ETH_P_IP)))
+ !((dev->features & NETIF_F_IP_CSUM) &&
+ skb->protocol == htons(ETH_P_IP)) &&
+ !((dev->features & NETIF_F_IPV6_CSUM) &&
+ skb->protocol == htons(ETH_P_IPV6)))
if (skb_checksum_help(skb))
goto out_kfree_skb;
}
spin_lock(&dev->queue_lock);
q = dev->qdisc;
if (q->enqueue) {
+ /* reset queue_mapping to zero */
+ skb->queue_mapping = 0;
rc = q->enqueue(skb, q);
qdisc_run(dev);
spin_unlock(&dev->queue_lock);
HARD_TX_LOCK(dev, cpu);
- if (!netif_queue_stopped(dev)) {
+ if (!netif_queue_stopped(dev) &&
+ !netif_subqueue_stopped(dev, skb->queue_mapping)) {
rc = 0;
if (!dev_hard_start_xmit(skb, dev)) {
HARD_TX_UNLOCK(dev);
return 0;
}
-/**
- * dev_set_promiscuity - update promiscuity count on a device
- * @dev: device
- * @inc: modifier
- *
- * Add or remove promiscuity from a device. While the count in the device
- * remains above zero the interface remains promiscuous. Once it hits zero
- * the device reverts back to normal filtering operation. A negative inc
- * value is used to drop promiscuity on the device.
- */
-void dev_set_promiscuity(struct net_device *dev, int inc)
+static void __dev_set_promiscuity(struct net_device *dev, int inc)
{
unsigned short old_flags = dev->flags;
else
dev->flags |= IFF_PROMISC;
if (dev->flags != old_flags) {
- dev_mc_upload(dev);
printk(KERN_INFO "device %s %s promiscuous mode\n",
dev->name, (dev->flags & IFF_PROMISC) ? "entered" :
"left");
}
}
+/**
+ * dev_set_promiscuity - update promiscuity count on a device
+ * @dev: device
+ * @inc: modifier
+ *
+ * Add or remove promiscuity from a device. While the count in the device
+ * remains above zero the interface remains promiscuous. Once it hits zero
+ * the device reverts back to normal filtering operation. A negative inc
+ * value is used to drop promiscuity on the device.
+ */
+void dev_set_promiscuity(struct net_device *dev, int inc)
+{
+ unsigned short old_flags = dev->flags;
+
+ __dev_set_promiscuity(dev, inc);
+ if (dev->flags != old_flags)
+ dev_set_rx_mode(dev);
+}
+
/**
* dev_set_allmulti - update allmulti count on a device
* @dev: device
if ((dev->allmulti += inc) == 0)
dev->flags &= ~IFF_ALLMULTI;
if (dev->flags ^ old_flags)
- dev_mc_upload(dev);
+ dev_set_rx_mode(dev);
+}
+
+/*
+ * Upload unicast and multicast address lists to device and
+ * configure RX filtering. When the device doesn't support unicast
+ * filtering it is put in promiscous mode while unicast addresses
+ * are present.
+ */
+void __dev_set_rx_mode(struct net_device *dev)
+{
+ /* dev_open will call this function so the list will stay sane. */
+ if (!(dev->flags&IFF_UP))
+ return;
+
+ if (!netif_device_present(dev))
+ return;
+
+ if (dev->set_rx_mode)
+ dev->set_rx_mode(dev);
+ else {
+ /* Unicast addresses changes may only happen under the rtnl,
+ * therefore calling __dev_set_promiscuity here is safe.
+ */
+ if (dev->uc_count > 0 && !dev->uc_promisc) {
+ __dev_set_promiscuity(dev, 1);
+ dev->uc_promisc = 1;
+ } else if (dev->uc_count == 0 && dev->uc_promisc) {
+ __dev_set_promiscuity(dev, -1);
+ dev->uc_promisc = 0;
+ }
+
+ if (dev->set_multicast_list)
+ dev->set_multicast_list(dev);
+ }
+}
+
+void dev_set_rx_mode(struct net_device *dev)
+{
+ netif_tx_lock_bh(dev);
+ __dev_set_rx_mode(dev);
+ netif_tx_unlock_bh(dev);
+}
+
+int __dev_addr_delete(struct dev_addr_list **list, int *count,
+ void *addr, int alen, int glbl)
+{
+ struct dev_addr_list *da;
+
+ for (; (da = *list) != NULL; list = &da->next) {
+ if (memcmp(da->da_addr, addr, da->da_addrlen) == 0 &&
+ alen == da->da_addrlen) {
+ if (glbl) {
+ int old_glbl = da->da_gusers;
+ da->da_gusers = 0;
+ if (old_glbl == 0)
+ break;
+ }
+ if (--da->da_users)
+ return 0;
+
+ *list = da->next;
+ kfree(da);
+ (*count)--;
+ return 0;
+ }
+ }
+ return -ENOENT;
+}
+
+int __dev_addr_add(struct dev_addr_list **list, int *count,
+ void *addr, int alen, int glbl)
+{
+ struct dev_addr_list *da;
+
+ for (da = *list; da != NULL; da = da->next) {
+ if (memcmp(da->da_addr, addr, da->da_addrlen) == 0 &&
+ da->da_addrlen == alen) {
+ if (glbl) {
+ int old_glbl = da->da_gusers;
+ da->da_gusers = 1;
+ if (old_glbl)
+ return 0;
+ }
+ da->da_users++;
+ return 0;
+ }
+ }
+
+ da = kmalloc(sizeof(*da), GFP_ATOMIC);
+ if (da == NULL)
+ return -ENOMEM;
+ memcpy(da->da_addr, addr, alen);
+ da->da_addrlen = alen;
+ da->da_users = 1;
+ da->da_gusers = glbl ? 1 : 0;
+ da->next = *list;
+ *list = da;
+ (*count)++;
+ return 0;
+}
+
+void __dev_addr_discard(struct dev_addr_list **list)
+{
+ struct dev_addr_list *tmp;
+
+ while (*list != NULL) {
+ tmp = *list;
+ *list = tmp->next;
+ if (tmp->da_users > tmp->da_gusers)
+ printk("__dev_addr_discard: address leakage! "
+ "da_users=%d\n", tmp->da_users);
+ kfree(tmp);
+ }
+}
+
+/**
+ * dev_unicast_delete - Release secondary unicast address.
+ * @dev: device
+ *
+ * Release reference to a secondary unicast address and remove it
+ * from the device if the reference count drop to zero.
+ *
+ * The caller must hold the rtnl_mutex.
+ */
+int dev_unicast_delete(struct net_device *dev, void *addr, int alen)
+{
+ int err;
+
+ ASSERT_RTNL();
+
+ netif_tx_lock_bh(dev);
+ err = __dev_addr_delete(&dev->uc_list, &dev->uc_count, addr, alen, 0);
+ if (!err)
+ __dev_set_rx_mode(dev);
+ netif_tx_unlock_bh(dev);
+ return err;
+}
+EXPORT_SYMBOL(dev_unicast_delete);
+
+/**
+ * dev_unicast_add - add a secondary unicast address
+ * @dev: device
+ *
+ * Add a secondary unicast address to the device or increase
+ * the reference count if it already exists.
+ *
+ * The caller must hold the rtnl_mutex.
+ */
+int dev_unicast_add(struct net_device *dev, void *addr, int alen)
+{
+ int err;
+
+ ASSERT_RTNL();
+
+ netif_tx_lock_bh(dev);
+ err = __dev_addr_add(&dev->uc_list, &dev->uc_count, addr, alen, 0);
+ if (!err)
+ __dev_set_rx_mode(dev);
+ netif_tx_unlock_bh(dev);
+ return err;
+}
+EXPORT_SYMBOL(dev_unicast_add);
+
+static void dev_unicast_discard(struct net_device *dev)
+{
+ netif_tx_lock_bh(dev);
+ __dev_addr_discard(&dev->uc_list);
+ dev->uc_count = 0;
+ netif_tx_unlock_bh(dev);
}
unsigned dev_get_flags(const struct net_device *dev)
* Load in the correct multicast list now the flags have changed.
*/
- dev_mc_upload(dev);
+ dev_set_rx_mode(dev);
/*
* Have we downed the interface. We handle IFF_UP ourselves
ret = ((old_flags & IFF_UP) ? dev_close : dev_open)(dev);
if (!ret)
- dev_mc_upload(dev);
+ dev_set_rx_mode(dev);
}
if (dev->flags & IFF_UP &&
}
}
+ /* Fix illegal checksum combinations */
+ if ((dev->features & NETIF_F_HW_CSUM) &&
+ (dev->features & (NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
+ printk(KERN_NOTICE "%s: mixed HW and IP checksum settings.\n",
+ dev->name);
+ dev->features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM);
+ }
+
+ if ((dev->features & NETIF_F_NO_CSUM) &&
+ (dev->features & (NETIF_F_HW_CSUM|NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM))) {
+ printk(KERN_NOTICE "%s: mixed no checksumming and other settings.\n",
+ dev->name);
+ dev->features &= ~(NETIF_F_IP_CSUM|NETIF_F_IPV6_CSUM|NETIF_F_HW_CSUM);
+ }
+
+
/* Fix illegal SG+CSUM combinations. */
if ((dev->features & NETIF_F_SG) &&
!(dev->features & NETIF_F_ALL_CSUM)) {
}
/**
- * alloc_netdev - allocate network device
+ * alloc_netdev_mq - allocate network device
* @sizeof_priv: size of private data to allocate space for
* @name: device name format string
* @setup: callback to initialize device
+ * @queue_count: the number of subqueues to allocate
*
* Allocates a struct net_device with private data area for driver use
- * and performs basic initialization.
+ * and performs basic initialization. Also allocates subquue structs
+ * for each queue on the device at the end of the netdevice.
*/
-struct net_device *alloc_netdev(int sizeof_priv, const char *name,
- void (*setup)(struct net_device *))
+struct net_device *alloc_netdev_mq(int sizeof_priv, const char *name,
+ void (*setup)(struct net_device *), unsigned int queue_count)
{
void *p;
struct net_device *dev;
BUG_ON(strlen(name) >= sizeof(dev->name));
/* ensure 32-byte alignment of both the device and private area */
- alloc_size = (sizeof(*dev) + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST;
+ alloc_size = (sizeof(*dev) + NETDEV_ALIGN_CONST +
+ (sizeof(struct net_device_subqueue) * queue_count)) &
+ ~NETDEV_ALIGN_CONST;
alloc_size += sizeof_priv + NETDEV_ALIGN_CONST;
p = kzalloc(alloc_size, GFP_KERNEL);
(((long)p + NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
dev->padded = (char *)dev - (char *)p;
- if (sizeof_priv)
- dev->priv = netdev_priv(dev);
+ if (sizeof_priv) {
+ dev->priv = ((char *)dev +
+ ((sizeof(struct net_device) +
+ (sizeof(struct net_device_subqueue) *
+ queue_count) + NETDEV_ALIGN_CONST)
+ & ~NETDEV_ALIGN_CONST));
+ }
+
+ dev->egress_subqueue_count = queue_count;
dev->get_stats = internal_stats;
setup(dev);
strcpy(dev->name, name);
return dev;
}
-EXPORT_SYMBOL(alloc_netdev);
+EXPORT_SYMBOL(alloc_netdev_mq);
/**
* free_netdev - free network device
raw_notifier_call_chain(&netdev_chain, NETDEV_UNREGISTER, dev);
/*
- * Flush the multicast chain
+ * Flush the unicast and multicast chains
*/
+ dev_unicast_discard(dev);
dev_mc_discard(dev);
if (dev->uninit)
* We block accesses to device mc filters with netif_tx_lock.
*/
-/*
- * Update the multicast list into the physical NIC controller.
- */
-
-static void __dev_mc_upload(struct net_device *dev)
-{
- /* Don't do anything till we up the interface
- * [dev_open will call this function so the list will
- * stay sane]
- */
-
- if (!(dev->flags&IFF_UP))
- return;
-
- /*
- * Devices with no set multicast or which have been
- * detached don't get set.
- */
-
- if (dev->set_multicast_list == NULL ||
- !netif_device_present(dev))
- return;
-
- dev->set_multicast_list(dev);
-}
-
-void dev_mc_upload(struct net_device *dev)
-{
- netif_tx_lock_bh(dev);
- __dev_mc_upload(dev);
- netif_tx_unlock_bh(dev);
-}
-
/*
* Delete a device level multicast
*/
int dev_mc_delete(struct net_device *dev, void *addr, int alen, int glbl)
{
- int err = 0;
- struct dev_mc_list *dmi, **dmip;
+ int err;
netif_tx_lock_bh(dev);
-
- for (dmip = &dev->mc_list; (dmi = *dmip) != NULL; dmip = &dmi->next) {
+ err = __dev_addr_delete(&dev->mc_list, &dev->mc_count,
+ addr, alen, glbl);
+ if (!err) {
/*
- * Find the entry we want to delete. The device could
- * have variable length entries so check these too.
+ * We have altered the list, so the card
+ * loaded filter is now wrong. Fix it
*/
- if (memcmp(dmi->dmi_addr, addr, dmi->dmi_addrlen) == 0 &&
- alen == dmi->dmi_addrlen) {
- if (glbl) {
- int old_glbl = dmi->dmi_gusers;
- dmi->dmi_gusers = 0;
- if (old_glbl == 0)
- break;
- }
- if (--dmi->dmi_users)
- goto done;
- /*
- * Last user. So delete the entry.
- */
- *dmip = dmi->next;
- dev->mc_count--;
-
- kfree(dmi);
-
- /*
- * We have altered the list, so the card
- * loaded filter is now wrong. Fix it
- */
- __dev_mc_upload(dev);
-
- netif_tx_unlock_bh(dev);
- return 0;
- }
+ __dev_set_rx_mode(dev);
}
- err = -ENOENT;
-done:
netif_tx_unlock_bh(dev);
return err;
}
int dev_mc_add(struct net_device *dev, void *addr, int alen, int glbl)
{
- int err = 0;
- struct dev_mc_list *dmi, *dmi1;
-
- dmi1 = kmalloc(sizeof(*dmi), GFP_ATOMIC);
+ int err;
netif_tx_lock_bh(dev);
- for (dmi = dev->mc_list; dmi != NULL; dmi = dmi->next) {
- if (memcmp(dmi->dmi_addr, addr, dmi->dmi_addrlen) == 0 &&
- dmi->dmi_addrlen == alen) {
- if (glbl) {
- int old_glbl = dmi->dmi_gusers;
- dmi->dmi_gusers = 1;
- if (old_glbl)
- goto done;
- }
- dmi->dmi_users++;
- goto done;
- }
- }
-
- if ((dmi = dmi1) == NULL) {
- netif_tx_unlock_bh(dev);
- return -ENOMEM;
- }
- memcpy(dmi->dmi_addr, addr, alen);
- dmi->dmi_addrlen = alen;
- dmi->next = dev->mc_list;
- dmi->dmi_users = 1;
- dmi->dmi_gusers = glbl ? 1 : 0;
- dev->mc_list = dmi;
- dev->mc_count++;
-
- __dev_mc_upload(dev);
-
- netif_tx_unlock_bh(dev);
- return 0;
-
-done:
+ err = __dev_addr_add(&dev->mc_list, &dev->mc_count, addr, alen, glbl);
+ if (!err)
+ __dev_set_rx_mode(dev);
netif_tx_unlock_bh(dev);
- kfree(dmi1);
return err;
}
void dev_mc_discard(struct net_device *dev)
{
netif_tx_lock_bh(dev);
-
- while (dev->mc_list != NULL) {
- struct dev_mc_list *tmp = dev->mc_list;
- dev->mc_list = tmp->next;
- if (tmp->dmi_users > tmp->dmi_gusers)
- printk("dev_mc_discard: multicast leakage! dmi_users=%d\n", tmp->dmi_users);
- kfree(tmp);
- }
+ __dev_addr_discard(&dev->mc_list);
dev->mc_count = 0;
-
netif_tx_unlock_bh(dev);
}
static int dev_mc_seq_show(struct seq_file *seq, void *v)
{
- struct dev_mc_list *m;
+ struct dev_addr_list *m;
struct net_device *dev = v;
netif_tx_lock_bh(dev);
EXPORT_SYMBOL(dev_mc_add);
EXPORT_SYMBOL(dev_mc_delete);
-EXPORT_SYMBOL(dev_mc_upload);
spin_unlock(e->stats_lock);
}
- mod_timer(&elist[idx].timer, jiffies + ((HZ<<idx)/4));
+ if (elist[idx].list != NULL)
+ mod_timer(&elist[idx].timer, jiffies + ((HZ<<idx)/4));
read_unlock(&est_lock);
}
local_irq_save(flags);
netif_tx_lock(dev);
- if (netif_queue_stopped(dev) ||
- dev->hard_start_xmit(skb, dev) != NETDEV_TX_OK) {
+ if ((netif_queue_stopped(dev) ||
+ netif_subqueue_stopped(dev, skb->queue_mapping)) ||
+ dev->hard_start_xmit(skb, dev) != NETDEV_TX_OK) {
skb_queue_head(&npinfo->txq, skb);
netif_tx_unlock(dev);
local_irq_restore(flags);
if (test_bit(__LINK_STATE_RX_SCHED, &np->dev->state) &&
npinfo->poll_owner != smp_processor_id() &&
spin_trylock(&npinfo->poll_lock)) {
+ /* When calling dev->poll from poll_napi, we may end up in
+ * netif_rx_complete. However, only the CPU to which the
+ * device was queued is allowed to remove it from poll_list.
+ * Setting POLL_LIST_FROZEN tells netif_rx_complete
+ * to leave the NAPI state alone.
+ */
+ set_bit(__LINK_STATE_POLL_LIST_FROZEN, &np->dev->state);
npinfo->rx_flags |= NETPOLL_RX_DROP;
atomic_inc(&trapped);
atomic_dec(&trapped);
npinfo->rx_flags &= ~NETPOLL_RX_DROP;
+ clear_bit(__LINK_STATE_POLL_LIST_FROZEN, &np->dev->state);
spin_unlock(&npinfo->poll_lock);
}
}
for (tries = jiffies_to_usecs(1)/USEC_PER_POLL;
tries > 0; --tries) {
if (netif_tx_trylock(dev)) {
- if (!netif_queue_stopped(dev))
+ if (!netif_queue_stopped(dev) &&
+ !netif_subqueue_stopped(dev, skb->queue_mapping))
status = dev->hard_start_xmit(skb, dev);
netif_tx_unlock(dev);
spin_unlock_irqrestore(&npinfo->rx_lock, flags);
}
- np->dev->npinfo = NULL;
if (atomic_dec_and_test(&npinfo->refcnt)) {
skb_queue_purge(&npinfo->arp_tx);
skb_queue_purge(&npinfo->txq);
kfree_skb(skb);
}
kfree(npinfo);
+ np->dev->npinfo = NULL;
}
}
#include <net/checksum.h>
#include <net/ipv6.h>
#include <net/addrconf.h>
+#ifdef CONFIG_XFRM
+#include <net/xfrm.h>
+#endif
#include <asm/byteorder.h>
#include <linux/rcupdate.h>
#include <asm/bitops.h>
#define F_MPLS_RND (1<<8) /* Random MPLS labels */
#define F_VID_RND (1<<9) /* Random VLAN ID */
#define F_SVID_RND (1<<10) /* Random SVLAN ID */
+#define F_FLOW_SEQ (1<<11) /* Sequential flows */
+#define F_IPSEC_ON (1<<12) /* ipsec on for flows */
/* Thread control flag bits */
#define T_TERMINATE (1<<0)
struct flow_state {
__be32 cur_daddr;
int count;
+#ifdef CONFIG_XFRM
+ struct xfrm_state *x;
+#endif
+ __u32 flags;
};
+/* flow flag bits */
+#define F_INIT (1<<0) /* flow has been initialized */
+
struct pktgen_dev {
/*
* Try to keep frequent/infrequent used vars. separated.
int min_pkt_size; /* = ETH_ZLEN; */
int max_pkt_size; /* = ETH_ZLEN; */
+ int pkt_overhead; /* overhead for MPLS, VLANs, IPSEC etc */
int nfrags;
__u32 delay_us; /* Default delay */
__u32 delay_ns;
unsigned cflows; /* Concurrent flows (config) */
unsigned lflow; /* Flow length (config) */
unsigned nflows; /* accumulated flows (stats) */
-
+ unsigned curfl; /* current sequenced flow (state)*/
+#ifdef CONFIG_XFRM
+ __u8 ipsmode; /* IPSEC mode (config) */
+ __u8 ipsproto; /* IPSEC type (config) */
+#endif
char result[512];
};
if (pkt_dev->flags & F_MPLS_RND)
seq_printf(seq, "MPLS_RND ");
+ if (pkt_dev->cflows) {
+ if (pkt_dev->flags & F_FLOW_SEQ)
+ seq_printf(seq, "FLOW_SEQ "); /*in sequence flows*/
+ else
+ seq_printf(seq, "FLOW_RND ");
+ }
+
+#ifdef CONFIG_XFRM
+ if (pkt_dev->flags & F_IPSEC_ON)
+ seq_printf(seq, "IPSEC ");
+#endif
+
if (pkt_dev->flags & F_MACSRC_RND)
seq_printf(seq, "MACSRC_RND ");
else if (strcmp(f, "!SVID_RND") == 0)
pkt_dev->flags &= ~F_SVID_RND;
+ else if (strcmp(f, "FLOW_SEQ") == 0)
+ pkt_dev->flags |= F_FLOW_SEQ;
+
+#ifdef CONFIG_XFRM
+ else if (strcmp(f, "IPSEC") == 0)
+ pkt_dev->flags |= F_IPSEC_ON;
+#endif
+
else if (strcmp(f, "!IPV6") == 0)
pkt_dev->flags &= ~F_IPV6;
"Flag -:%s:- unknown\nAvailable flags, (prepend ! to un-set flag):\n%s",
f,
"IPSRC_RND, IPDST_RND, UDPSRC_RND, UDPDST_RND, "
- "MACSRC_RND, MACDST_RND, TXSIZE_RND, IPV6, MPLS_RND, VID_RND, SVID_RND\n");
+ "MACSRC_RND, MACDST_RND, TXSIZE_RND, IPV6, MPLS_RND, VID_RND, SVID_RND, FLOW_SEQ, IPSEC\n");
return count;
}
sprintf(pg_result, "OK: flags=0x%x", pkt_dev->flags);
pkt_dev->idle_acc += now - start;
}
+static inline void set_pkt_overhead(struct pktgen_dev *pkt_dev)
+{
+ pkt_dev->pkt_overhead = 0;
+ pkt_dev->pkt_overhead += pkt_dev->nr_labels*sizeof(u32);
+ pkt_dev->pkt_overhead += VLAN_TAG_SIZE(pkt_dev);
+ pkt_dev->pkt_overhead += SVLAN_TAG_SIZE(pkt_dev);
+}
+
+static inline int f_seen(struct pktgen_dev *pkt_dev, int flow)
+{
+
+ if (pkt_dev->flows[flow].flags & F_INIT)
+ return 1;
+ else
+ return 0;
+}
+
+static inline int f_pick(struct pktgen_dev *pkt_dev)
+{
+ int flow = pkt_dev->curfl;
+
+ if (pkt_dev->flags & F_FLOW_SEQ) {
+ if (pkt_dev->flows[flow].count >= pkt_dev->lflow) {
+ /* reset time */
+ pkt_dev->flows[flow].count = 0;
+ pkt_dev->curfl += 1;
+ if (pkt_dev->curfl >= pkt_dev->cflows)
+ pkt_dev->curfl = 0; /*reset */
+ }
+ } else {
+ flow = random32() % pkt_dev->cflows;
+
+ if (pkt_dev->flows[flow].count > pkt_dev->lflow)
+ pkt_dev->flows[flow].count = 0;
+ }
+
+ return pkt_dev->curfl;
+}
+
+
+#ifdef CONFIG_XFRM
+/* If there was already an IPSEC SA, we keep it as is, else
+ * we go look for it ...
+*/
+inline
+void get_ipsec_sa(struct pktgen_dev *pkt_dev, int flow)
+{
+ struct xfrm_state *x = pkt_dev->flows[flow].x;
+ if (!x) {
+ /*slow path: we dont already have xfrm_state*/
+ x = xfrm_stateonly_find((xfrm_address_t *)&pkt_dev->cur_daddr,
+ (xfrm_address_t *)&pkt_dev->cur_saddr,
+ AF_INET,
+ pkt_dev->ipsmode,
+ pkt_dev->ipsproto, 0);
+ if (x) {
+ pkt_dev->flows[flow].x = x;
+ set_pkt_overhead(pkt_dev);
+ pkt_dev->pkt_overhead+=x->props.header_len;
+ }
+
+ }
+}
+#endif
/* Increment/randomize headers according to flags and current values
* for IP src/dest, UDP src/dst port, MAC-Addr src/dst
*/
__u32 imx;
int flow = 0;
- if (pkt_dev->cflows) {
- flow = random32() % pkt_dev->cflows;
-
- if (pkt_dev->flows[flow].count > pkt_dev->lflow)
- pkt_dev->flows[flow].count = 0;
- }
+ if (pkt_dev->cflows)
+ flow = f_pick(pkt_dev);
/* Deal with source MAC */
if (pkt_dev->src_mac_count > 1) {
pkt_dev->cur_saddr = htonl(t);
}
- if (pkt_dev->cflows && pkt_dev->flows[flow].count != 0) {
+ if (pkt_dev->cflows && f_seen(pkt_dev, flow)) {
pkt_dev->cur_daddr = pkt_dev->flows[flow].cur_daddr;
} else {
imn = ntohl(pkt_dev->daddr_min);
}
}
if (pkt_dev->cflows) {
+ pkt_dev->flows[flow].flags |= F_INIT;
pkt_dev->flows[flow].cur_daddr =
pkt_dev->cur_daddr;
+#ifdef CONFIG_XFRM
+ if (pkt_dev->flags & F_IPSEC_ON)
+ get_ipsec_sa(pkt_dev, flow);
+#endif
pkt_dev->nflows++;
}
}
pkt_dev->flows[flow].count++;
}
+
+#ifdef CONFIG_XFRM
+static int pktgen_output_ipsec(struct sk_buff *skb, struct pktgen_dev *pkt_dev)
+{
+ struct xfrm_state *x = pkt_dev->flows[pkt_dev->curfl].x;
+ int err = 0;
+ struct iphdr *iph;
+
+ if (!x)
+ return 0;
+ /* XXX: we dont support tunnel mode for now until
+ * we resolve the dst issue */
+ if (x->props.mode != XFRM_MODE_TRANSPORT)
+ return 0;
+
+ spin_lock(&x->lock);
+ iph = ip_hdr(skb);
+
+ err = x->mode->output(x, skb);
+ if (err)
+ goto error;
+ err = x->type->output(x, skb);
+ if (err)
+ goto error;
+
+ x->curlft.bytes +=skb->len;
+ x->curlft.packets++;
+ spin_unlock(&x->lock);
+
+error:
+ spin_unlock(&x->lock);
+ return err;
+}
+
+static inline void free_SAs(struct pktgen_dev *pkt_dev)
+{
+ if (pkt_dev->cflows) {
+ /* let go of the SAs if we have them */
+ int i = 0;
+ for (; i < pkt_dev->nflows; i++){
+ struct xfrm_state *x = pkt_dev->flows[i].x;
+ if (x) {
+ xfrm_state_put(x);
+ pkt_dev->flows[i].x = NULL;
+ }
+ }
+ }
+}
+
+static inline int process_ipsec(struct pktgen_dev *pkt_dev,
+ struct sk_buff *skb, __be16 protocol)
+{
+ if (pkt_dev->flags & F_IPSEC_ON) {
+ struct xfrm_state *x = pkt_dev->flows[pkt_dev->curfl].x;
+ int nhead = 0;
+ if (x) {
+ int ret;
+ __u8 *eth;
+ nhead = x->props.header_len - skb_headroom(skb);
+ if (nhead >0) {
+ ret = pskb_expand_head(skb, nhead, 0, GFP_ATOMIC);
+ if (ret < 0) {
+ printk("Error expanding ipsec packet %d\n",ret);
+ return 0;
+ }
+ }
+
+ /* ipsec is not expecting ll header */
+ skb_pull(skb, ETH_HLEN);
+ ret = pktgen_output_ipsec(skb, pkt_dev);
+ if (ret) {
+ printk("Error creating ipsec packet %d\n",ret);
+ kfree_skb(skb);
+ return 0;
+ }
+ /* restore ll */
+ eth = (__u8 *) skb_push(skb, ETH_HLEN);
+ memcpy(eth, pkt_dev->hh, 12);
+ *(u16 *) & eth[12] = protocol;
+ }
+ }
+ return 1;
+}
+#endif
+
static void mpls_push(__be32 *mpls, struct pktgen_dev *pkt_dev)
{
unsigned i;
datalen = (odev->hard_header_len + 16) & ~0xf;
skb = alloc_skb(pkt_dev->cur_pkt_size + 64 + datalen +
- pkt_dev->nr_labels*sizeof(u32) +
- VLAN_TAG_SIZE(pkt_dev) + SVLAN_TAG_SIZE(pkt_dev),
- GFP_ATOMIC);
+ pkt_dev->pkt_overhead, GFP_ATOMIC);
if (!skb) {
sprintf(pkt_dev->result, "No memory");
return NULL;
/* Eth + IPh + UDPh + mpls */
datalen = pkt_dev->cur_pkt_size - 14 - 20 - 8 -
- pkt_dev->nr_labels*sizeof(u32) - VLAN_TAG_SIZE(pkt_dev) - SVLAN_TAG_SIZE(pkt_dev);
+ pkt_dev->pkt_overhead;
if (datalen < sizeof(struct pktgen_hdr))
datalen = sizeof(struct pktgen_hdr);
iph->check = ip_fast_csum((void *)iph, iph->ihl);
skb->protocol = protocol;
skb->mac_header = (skb->network_header - ETH_HLEN -
- pkt_dev->nr_labels * sizeof(u32) -
- VLAN_TAG_SIZE(pkt_dev) - SVLAN_TAG_SIZE(pkt_dev));
+ pkt_dev->pkt_overhead);
skb->dev = odev;
skb->pkt_type = PACKET_HOST;
pgh->tv_usec = htonl(timestamp.tv_usec);
}
+#ifdef CONFIG_XFRM
+ if (!process_ipsec(pkt_dev, skb, protocol))
+ return NULL;
+#endif
+
return skb;
}
mod_cur_headers(pkt_dev);
skb = alloc_skb(pkt_dev->cur_pkt_size + 64 + 16 +
- pkt_dev->nr_labels*sizeof(u32) +
- VLAN_TAG_SIZE(pkt_dev) + SVLAN_TAG_SIZE(pkt_dev),
- GFP_ATOMIC);
+ pkt_dev->pkt_overhead, GFP_ATOMIC);
if (!skb) {
sprintf(pkt_dev->result, "No memory");
return NULL;
/* Eth + IPh + UDPh + mpls */
datalen = pkt_dev->cur_pkt_size - 14 -
sizeof(struct ipv6hdr) - sizeof(struct udphdr) -
- pkt_dev->nr_labels*sizeof(u32) - VLAN_TAG_SIZE(pkt_dev) - SVLAN_TAG_SIZE(pkt_dev);
+ pkt_dev->pkt_overhead;
if (datalen < sizeof(struct pktgen_hdr)) {
datalen = sizeof(struct pktgen_hdr);
ipv6_addr_copy(&iph->saddr, &pkt_dev->cur_in6_saddr);
skb->mac_header = (skb->network_header - ETH_HLEN -
- pkt_dev->nr_labels * sizeof(u32) -
- VLAN_TAG_SIZE(pkt_dev) - SVLAN_TAG_SIZE(pkt_dev));
+ pkt_dev->pkt_overhead);
skb->protocol = protocol;
skb->dev = odev;
skb->pkt_type = PACKET_HOST;
pkt_dev->started_at = getCurUs();
pkt_dev->next_tx_us = getCurUs(); /* Transmit immediately */
pkt_dev->next_tx_ns = 0;
+ set_pkt_overhead(pkt_dev);
strcpy(pkt_dev->result, "Starting");
started++;
}
}
- if (netif_queue_stopped(odev) || need_resched()) {
+ if ((netif_queue_stopped(odev) ||
+ netif_subqueue_stopped(odev, pkt_dev->skb->queue_mapping)) ||
+ need_resched()) {
idle_start = getCurUs();
if (!netif_running(odev)) {
pkt_dev->idle_acc += getCurUs() - idle_start;
- if (netif_queue_stopped(odev)) {
+ if (netif_queue_stopped(odev) ||
+ netif_subqueue_stopped(odev, pkt_dev->skb->queue_mapping)) {
pkt_dev->next_tx_us = getCurUs(); /* TODO */
pkt_dev->next_tx_ns = 0;
goto out; /* Try the next interface */
}
netif_tx_lock_bh(odev);
- if (!netif_queue_stopped(odev)) {
+ if (!netif_queue_stopped(odev) &&
+ !netif_subqueue_stopped(odev, pkt_dev->skb->queue_mapping)) {
atomic_inc(&(pkt_dev->skb->users));
retry_now:
}
pkt_dev->entry->proc_fops = &pktgen_if_fops;
pkt_dev->entry->data = pkt_dev;
+#ifdef CONFIG_XFRM
+ pkt_dev->ipsmode = XFRM_MODE_TRANSPORT;
+ pkt_dev->ipsproto = IPPROTO_ESP;
+#endif
return add_dev_to_thread(t, pkt_dev);
out2:
dev_put(pkt_dev->odev);
out1:
+#ifdef CONFIG_XFRM
+ free_SAs(pkt_dev);
+#endif
if (pkt_dev->flows)
vfree(pkt_dev->flows);
kfree(pkt_dev);
if (pkt_dev->entry)
remove_proc_entry(pkt_dev->entry->name, pg_proc_dir);
+#ifdef CONFIG_XFRM
+ free_SAs(pkt_dev);
+#endif
if (pkt_dev->flows)
vfree(pkt_dev->flows);
kfree(pkt_dev);
return 0;
}
+int __rtattr_parse_nested_compat(struct rtattr *tb[], int maxattr,
+ struct rtattr *rta, int len)
+{
+ if (RTA_PAYLOAD(rta) < len)
+ return -1;
+ if (RTA_PAYLOAD(rta) >= RTA_ALIGN(len) + sizeof(struct rtattr)) {
+ rta = RTA_DATA(rta) + RTA_ALIGN(len);
+ return rtattr_parse_nested(tb, maxattr, rta);
+ }
+ memset(tb, 0, sizeof(struct rtattr *) * maxattr);
+ return 0;
+}
+
static struct rtnl_link *rtnl_msg_handlers[NPROTO];
static inline int rtm_msgindex(int msgtype)
EXPORT_SYMBOL_GPL(rtnl_unregister_all);
+static LIST_HEAD(link_ops);
+
+/**
+ * __rtnl_link_register - Register rtnl_link_ops with rtnetlink.
+ * @ops: struct rtnl_link_ops * to register
+ *
+ * The caller must hold the rtnl_mutex. This function should be used
+ * by drivers that create devices during module initialization. It
+ * must be called before registering the devices.
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int __rtnl_link_register(struct rtnl_link_ops *ops)
+{
+ if (!ops->dellink)
+ ops->dellink = unregister_netdevice;
+
+ list_add_tail(&ops->list, &link_ops);
+ return 0;
+}
+
+EXPORT_SYMBOL_GPL(__rtnl_link_register);
+
+/**
+ * rtnl_link_register - Register rtnl_link_ops with rtnetlink.
+ * @ops: struct rtnl_link_ops * to register
+ *
+ * Returns 0 on success or a negative error code.
+ */
+int rtnl_link_register(struct rtnl_link_ops *ops)
+{
+ int err;
+
+ rtnl_lock();
+ err = __rtnl_link_register(ops);
+ rtnl_unlock();
+ return err;
+}
+
+EXPORT_SYMBOL_GPL(rtnl_link_register);
+
+/**
+ * __rtnl_link_unregister - Unregister rtnl_link_ops from rtnetlink.
+ * @ops: struct rtnl_link_ops * to unregister
+ *
+ * The caller must hold the rtnl_mutex.
+ */
+void __rtnl_link_unregister(struct rtnl_link_ops *ops)
+{
+ struct net_device *dev, *n;
+
+ for_each_netdev_safe(dev, n) {
+ if (dev->rtnl_link_ops == ops)
+ ops->dellink(dev);
+ }
+ list_del(&ops->list);
+}
+
+EXPORT_SYMBOL_GPL(__rtnl_link_unregister);
+
+/**
+ * rtnl_link_unregister - Unregister rtnl_link_ops from rtnetlink.
+ * @ops: struct rtnl_link_ops * to unregister
+ */
+void rtnl_link_unregister(struct rtnl_link_ops *ops)
+{
+ rtnl_lock();
+ __rtnl_link_unregister(ops);
+ rtnl_unlock();
+}
+
+EXPORT_SYMBOL_GPL(rtnl_link_unregister);
+
+static const struct rtnl_link_ops *rtnl_link_ops_get(const char *kind)
+{
+ const struct rtnl_link_ops *ops;
+
+ list_for_each_entry(ops, &link_ops, list) {
+ if (!strcmp(ops->kind, kind))
+ return ops;
+ }
+ return NULL;
+}
+
+static size_t rtnl_link_get_size(const struct net_device *dev)
+{
+ const struct rtnl_link_ops *ops = dev->rtnl_link_ops;
+ size_t size;
+
+ if (!ops)
+ return 0;
+
+ size = nlmsg_total_size(sizeof(struct nlattr)) + /* IFLA_LINKINFO */
+ nlmsg_total_size(strlen(ops->kind) + 1); /* IFLA_INFO_KIND */
+
+ if (ops->get_size)
+ /* IFLA_INFO_DATA + nested data */
+ size += nlmsg_total_size(sizeof(struct nlattr)) +
+ ops->get_size(dev);
+
+ if (ops->get_xstats_size)
+ size += ops->get_xstats_size(dev); /* IFLA_INFO_XSTATS */
+
+ return size;
+}
+
+static int rtnl_link_fill(struct sk_buff *skb, const struct net_device *dev)
+{
+ const struct rtnl_link_ops *ops = dev->rtnl_link_ops;
+ struct nlattr *linkinfo, *data;
+ int err = -EMSGSIZE;
+
+ linkinfo = nla_nest_start(skb, IFLA_LINKINFO);
+ if (linkinfo == NULL)
+ goto out;
+
+ if (nla_put_string(skb, IFLA_INFO_KIND, ops->kind) < 0)
+ goto err_cancel_link;
+ if (ops->fill_xstats) {
+ err = ops->fill_xstats(skb, dev);
+ if (err < 0)
+ goto err_cancel_link;
+ }
+ if (ops->fill_info) {
+ data = nla_nest_start(skb, IFLA_INFO_DATA);
+ if (data == NULL)
+ goto err_cancel_link;
+ err = ops->fill_info(skb, dev);
+ if (err < 0)
+ goto err_cancel_data;
+ nla_nest_end(skb, data);
+ }
+
+ nla_nest_end(skb, linkinfo);
+ return 0;
+
+err_cancel_data:
+ nla_nest_cancel(skb, data);
+err_cancel_link:
+ nla_nest_cancel(skb, linkinfo);
+out:
+ return err;
+}
+
static const int rtm_min[RTM_NR_FAMILIES] =
{
[RTM_FAM(RTM_NEWLINK)] = NLMSG_LENGTH(sizeof(struct ifinfomsg)),
a->tx_compressed = b->tx_compressed;
};
-static inline size_t if_nlmsg_size(void)
+static inline size_t if_nlmsg_size(const struct net_device *dev)
{
return NLMSG_ALIGN(sizeof(struct ifinfomsg))
+ nla_total_size(IFNAMSIZ) /* IFLA_IFNAME */
+ nla_total_size(4) /* IFLA_LINK */
+ nla_total_size(4) /* IFLA_MASTER */
+ nla_total_size(1) /* IFLA_OPERSTATE */
- + nla_total_size(1); /* IFLA_LINKMODE */
+ + nla_total_size(1) /* IFLA_LINKMODE */
+ + rtnl_link_get_size(dev); /* IFLA_LINKINFO */
}
static int rtnl_fill_ifinfo(struct sk_buff *skb, struct net_device *dev,
}
}
+ if (dev->rtnl_link_ops) {
+ if (rtnl_link_fill(skb, dev) < 0)
+ goto nla_put_failure;
+ }
+
return nlmsg_end(skb, nlh);
nla_put_failure:
static const struct nla_policy ifla_policy[IFLA_MAX+1] = {
[IFLA_IFNAME] = { .type = NLA_STRING, .len = IFNAMSIZ-1 },
+ [IFLA_ADDRESS] = { .type = NLA_BINARY, .len = MAX_ADDR_LEN },
+ [IFLA_BROADCAST] = { .type = NLA_BINARY, .len = MAX_ADDR_LEN },
[IFLA_MAP] = { .len = sizeof(struct rtnl_link_ifmap) },
[IFLA_MTU] = { .type = NLA_U32 },
[IFLA_TXQLEN] = { .type = NLA_U32 },
[IFLA_LINKMODE] = { .type = NLA_U8 },
};
-static int rtnl_setlink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
-{
- struct ifinfomsg *ifm;
- struct net_device *dev;
- int err, send_addr_notify = 0, modified = 0;
- struct nlattr *tb[IFLA_MAX+1];
- char ifname[IFNAMSIZ];
-
- err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy);
- if (err < 0)
- goto errout;
-
- if (tb[IFLA_IFNAME])
- nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
- else
- ifname[0] = '\0';
-
- err = -EINVAL;
- ifm = nlmsg_data(nlh);
- if (ifm->ifi_index > 0)
- dev = dev_get_by_index(ifm->ifi_index);
- else if (tb[IFLA_IFNAME])
- dev = dev_get_by_name(ifname);
- else
- goto errout;
-
- if (dev == NULL) {
- err = -ENODEV;
- goto errout;
- }
-
- if (tb[IFLA_ADDRESS] &&
- nla_len(tb[IFLA_ADDRESS]) < dev->addr_len)
- goto errout_dev;
+static const struct nla_policy ifla_info_policy[IFLA_INFO_MAX+1] = {
+ [IFLA_INFO_KIND] = { .type = NLA_STRING },
+ [IFLA_INFO_DATA] = { .type = NLA_NESTED },
+};
- if (tb[IFLA_BROADCAST] &&
- nla_len(tb[IFLA_BROADCAST]) < dev->addr_len)
- goto errout_dev;
+static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm,
+ struct nlattr **tb, char *ifname, int modified)
+{
+ int send_addr_notify = 0;
+ int err;
if (tb[IFLA_MAP]) {
struct rtnl_link_ifmap *u_map;
if (!dev->set_config) {
err = -EOPNOTSUPP;
- goto errout_dev;
+ goto errout;
}
if (!netif_device_present(dev)) {
err = -ENODEV;
- goto errout_dev;
+ goto errout;
}
u_map = nla_data(tb[IFLA_MAP]);
err = dev->set_config(dev, &k_map);
if (err < 0)
- goto errout_dev;
+ goto errout;
modified = 1;
}
if (!dev->set_mac_address) {
err = -EOPNOTSUPP;
- goto errout_dev;
+ goto errout;
}
if (!netif_device_present(dev)) {
err = -ENODEV;
- goto errout_dev;
+ goto errout;
}
len = sizeof(sa_family_t) + dev->addr_len;
sa = kmalloc(len, GFP_KERNEL);
if (!sa) {
err = -ENOMEM;
- goto errout_dev;
+ goto errout;
}
sa->sa_family = dev->type;
memcpy(sa->sa_data, nla_data(tb[IFLA_ADDRESS]),
err = dev->set_mac_address(dev, sa);
kfree(sa);
if (err)
- goto errout_dev;
+ goto errout;
send_addr_notify = 1;
modified = 1;
}
if (tb[IFLA_MTU]) {
err = dev_set_mtu(dev, nla_get_u32(tb[IFLA_MTU]));
if (err < 0)
- goto errout_dev;
+ goto errout;
modified = 1;
}
if (ifm->ifi_index > 0 && ifname[0]) {
err = dev_change_name(dev, ifname);
if (err < 0)
- goto errout_dev;
+ goto errout;
modified = 1;
}
send_addr_notify = 1;
}
-
if (ifm->ifi_flags || ifm->ifi_change) {
unsigned int flags = ifm->ifi_flags;
err = 0;
-errout_dev:
+errout:
if (err < 0 && modified && net_ratelimit())
printk(KERN_WARNING "A link change request failed with "
"some changes comitted already. Interface %s may "
if (send_addr_notify)
call_netdevice_notifiers(NETDEV_CHANGEADDR, dev);
+ return err;
+}
+
+static int rtnl_setlink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
+{
+ struct ifinfomsg *ifm;
+ struct net_device *dev;
+ int err;
+ struct nlattr *tb[IFLA_MAX+1];
+ char ifname[IFNAMSIZ];
+
+ err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy);
+ if (err < 0)
+ goto errout;
+
+ if (tb[IFLA_IFNAME])
+ nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
+ else
+ ifname[0] = '\0';
+
+ err = -EINVAL;
+ ifm = nlmsg_data(nlh);
+ if (ifm->ifi_index > 0)
+ dev = dev_get_by_index(ifm->ifi_index);
+ else if (tb[IFLA_IFNAME])
+ dev = dev_get_by_name(ifname);
+ else
+ goto errout;
+
+ if (dev == NULL) {
+ err = -ENODEV;
+ goto errout;
+ }
+ if (tb[IFLA_ADDRESS] &&
+ nla_len(tb[IFLA_ADDRESS]) < dev->addr_len)
+ goto errout_dev;
+
+ if (tb[IFLA_BROADCAST] &&
+ nla_len(tb[IFLA_BROADCAST]) < dev->addr_len)
+ goto errout_dev;
+
+ err = do_setlink(dev, ifm, tb, ifname, 0);
+errout_dev:
dev_put(dev);
errout:
return err;
}
+static int rtnl_dellink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
+{
+ const struct rtnl_link_ops *ops;
+ struct net_device *dev;
+ struct ifinfomsg *ifm;
+ char ifname[IFNAMSIZ];
+ struct nlattr *tb[IFLA_MAX+1];
+ int err;
+
+ err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy);
+ if (err < 0)
+ return err;
+
+ if (tb[IFLA_IFNAME])
+ nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
+
+ ifm = nlmsg_data(nlh);
+ if (ifm->ifi_index > 0)
+ dev = __dev_get_by_index(ifm->ifi_index);
+ else if (tb[IFLA_IFNAME])
+ dev = __dev_get_by_name(ifname);
+ else
+ return -EINVAL;
+
+ if (!dev)
+ return -ENODEV;
+
+ ops = dev->rtnl_link_ops;
+ if (!ops)
+ return -EOPNOTSUPP;
+
+ ops->dellink(dev);
+ return 0;
+}
+
+static int rtnl_newlink(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg)
+{
+ const struct rtnl_link_ops *ops;
+ struct net_device *dev;
+ struct ifinfomsg *ifm;
+ char kind[MODULE_NAME_LEN];
+ char ifname[IFNAMSIZ];
+ struct nlattr *tb[IFLA_MAX+1];
+ struct nlattr *linkinfo[IFLA_INFO_MAX+1];
+ int err;
+
+replay:
+ err = nlmsg_parse(nlh, sizeof(*ifm), tb, IFLA_MAX, ifla_policy);
+ if (err < 0)
+ return err;
+
+ if (tb[IFLA_IFNAME])
+ nla_strlcpy(ifname, tb[IFLA_IFNAME], IFNAMSIZ);
+ else
+ ifname[0] = '\0';
+
+ ifm = nlmsg_data(nlh);
+ if (ifm->ifi_index > 0)
+ dev = __dev_get_by_index(ifm->ifi_index);
+ else if (ifname[0])
+ dev = __dev_get_by_name(ifname);
+ else
+ dev = NULL;
+
+ if (tb[IFLA_LINKINFO]) {
+ err = nla_parse_nested(linkinfo, IFLA_INFO_MAX,
+ tb[IFLA_LINKINFO], ifla_info_policy);
+ if (err < 0)
+ return err;
+ } else
+ memset(linkinfo, 0, sizeof(linkinfo));
+
+ if (linkinfo[IFLA_INFO_KIND]) {
+ nla_strlcpy(kind, linkinfo[IFLA_INFO_KIND], sizeof(kind));
+ ops = rtnl_link_ops_get(kind);
+ } else {
+ kind[0] = '\0';
+ ops = NULL;
+ }
+
+ if (1) {
+ struct nlattr *attr[ops ? ops->maxtype + 1 : 0], **data = NULL;
+
+ if (ops) {
+ if (ops->maxtype && linkinfo[IFLA_INFO_DATA]) {
+ err = nla_parse_nested(attr, ops->maxtype,
+ linkinfo[IFLA_INFO_DATA],
+ ops->policy);
+ if (err < 0)
+ return err;
+ data = attr;
+ }
+ if (ops->validate) {
+ err = ops->validate(tb, data);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ if (dev) {
+ int modified = 0;
+
+ if (nlh->nlmsg_flags & NLM_F_EXCL)
+ return -EEXIST;
+ if (nlh->nlmsg_flags & NLM_F_REPLACE)
+ return -EOPNOTSUPP;
+
+ if (linkinfo[IFLA_INFO_DATA]) {
+ if (!ops || ops != dev->rtnl_link_ops ||
+ !ops->changelink)
+ return -EOPNOTSUPP;
+
+ err = ops->changelink(dev, tb, data);
+ if (err < 0)
+ return err;
+ modified = 1;
+ }
+
+ return do_setlink(dev, ifm, tb, ifname, modified);
+ }
+
+ if (!(nlh->nlmsg_flags & NLM_F_CREATE))
+ return -ENODEV;
+
+ if (ifm->ifi_index || ifm->ifi_flags || ifm->ifi_change)
+ return -EOPNOTSUPP;
+ if (tb[IFLA_MAP] || tb[IFLA_MASTER] || tb[IFLA_PROTINFO])
+ return -EOPNOTSUPP;
+
+ if (!ops) {
+#ifdef CONFIG_KMOD
+ if (kind[0]) {
+ __rtnl_unlock();
+ request_module("rtnl-link-%s", kind);
+ rtnl_lock();
+ ops = rtnl_link_ops_get(kind);
+ if (ops)
+ goto replay;
+ }
+#endif
+ return -EOPNOTSUPP;
+ }
+
+ if (!ifname[0])
+ snprintf(ifname, IFNAMSIZ, "%s%%d", ops->kind);
+ dev = alloc_netdev(ops->priv_size, ifname, ops->setup);
+ if (!dev)
+ return -ENOMEM;
+
+ if (strchr(dev->name, '%')) {
+ err = dev_alloc_name(dev, dev->name);
+ if (err < 0)
+ goto err_free;
+ }
+ dev->rtnl_link_ops = ops;
+
+ if (tb[IFLA_MTU])
+ dev->mtu = nla_get_u32(tb[IFLA_MTU]);
+ if (tb[IFLA_ADDRESS])
+ memcpy(dev->dev_addr, nla_data(tb[IFLA_ADDRESS]),
+ nla_len(tb[IFLA_ADDRESS]));
+ if (tb[IFLA_BROADCAST])
+ memcpy(dev->broadcast, nla_data(tb[IFLA_BROADCAST]),
+ nla_len(tb[IFLA_BROADCAST]));
+ if (tb[IFLA_TXQLEN])
+ dev->tx_queue_len = nla_get_u32(tb[IFLA_TXQLEN]);
+ if (tb[IFLA_WEIGHT])
+ dev->weight = nla_get_u32(tb[IFLA_WEIGHT]);
+ if (tb[IFLA_OPERSTATE])
+ set_operstate(dev, nla_get_u8(tb[IFLA_OPERSTATE]));
+ if (tb[IFLA_LINKMODE])
+ dev->link_mode = nla_get_u8(tb[IFLA_LINKMODE]);
+
+ if (ops->newlink)
+ err = ops->newlink(dev, tb, data);
+ else
+ err = register_netdevice(dev);
+err_free:
+ if (err < 0)
+ free_netdev(dev);
+ return err;
+ }
+}
+
static int rtnl_getlink(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg)
{
struct ifinfomsg *ifm;
} else
return -EINVAL;
- nskb = nlmsg_new(if_nlmsg_size(), GFP_KERNEL);
+ nskb = nlmsg_new(if_nlmsg_size(dev), GFP_KERNEL);
if (nskb == NULL) {
err = -ENOBUFS;
goto errout;
struct sk_buff *skb;
int err = -ENOBUFS;
- skb = nlmsg_new(if_nlmsg_size(), GFP_KERNEL);
+ skb = nlmsg_new(if_nlmsg_size(dev), GFP_KERNEL);
if (skb == NULL)
goto errout;
rtnl_register(PF_UNSPEC, RTM_GETLINK, rtnl_getlink, rtnl_dump_ifinfo);
rtnl_register(PF_UNSPEC, RTM_SETLINK, rtnl_setlink, NULL);
+ rtnl_register(PF_UNSPEC, RTM_NEWLINK, rtnl_newlink, NULL);
+ rtnl_register(PF_UNSPEC, RTM_DELLINK, rtnl_dellink, NULL);
rtnl_register(PF_UNSPEC, RTM_GETADDR, NULL, rtnl_dump_all);
rtnl_register(PF_UNSPEC, RTM_GETROUTE, NULL, rtnl_dump_all);
EXPORT_SYMBOL(__rta_fill);
EXPORT_SYMBOL(rtattr_strlcpy);
EXPORT_SYMBOL(rtattr_parse);
+EXPORT_SYMBOL(__rtattr_parse_nested_compat);
EXPORT_SYMBOL(rtnetlink_put_metrics);
EXPORT_SYMBOL(rtnl_lock);
EXPORT_SYMBOL(rtnl_trylock);
C(csum);
C(local_df);
n->cloned = 1;
+ n->hdr_len = skb->nohdr ? skb_headroom(skb) : skb->hdr_len;
n->nohdr = 0;
C(pkt_type);
C(ip_summed);
+ skb_copy_queue_mapping(n, skb);
C(priority);
#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
C(ipvs_property);
n->destructor = NULL;
C(mark);
__nf_copy(n, skb);
+#if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+ defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
+ C(nf_trace);
+#endif
#ifdef CONFIG_NET_SCHED
C(tc_index);
#ifdef CONFIG_NET_CLS_ACT
#endif
new->sk = NULL;
new->dev = old->dev;
+ skb_copy_queue_mapping(new, old);
new->priority = old->priority;
new->protocol = old->protocol;
new->dst = dst_clone(old->dst);
new->destructor = NULL;
new->mark = old->mark;
__nf_copy(new, old);
+#if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+ defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
+ new->nf_trace = old->nf_trace;
+#endif
#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
new->ipvs_property = old->ipvs_property;
#endif
skb->network_header += off;
skb->mac_header += off;
skb->cloned = 0;
+ skb->hdr_len = 0;
skb->nohdr = 0;
atomic_set(&skb_shinfo(skb)->dataref, 1);
return 0;
tail = nskb;
nskb->dev = skb->dev;
+ skb_copy_queue_mapping(nskb, skb);
nskb->priority = skb->priority;
nskb->protocol = skb->protocol;
nskb->dst = dst_clone(skb->dst);
return -EDOM;
if (tv.tv_sec < 0) {
- static int warned = 0;
+ static int warned __read_mostly;
+
*timeo_p = 0;
if (warned < 10 && net_ratelimit())
warned++;
EXPORT_SYMBOL(proto_unregister);
#ifdef CONFIG_PROC_FS
-static inline struct proto *__proto_head(void)
-{
- return list_entry(proto_list.next, struct proto, node);
-}
-
-static inline struct proto *proto_head(void)
-{
- return list_empty(&proto_list) ? NULL : __proto_head();
-}
-
-static inline struct proto *proto_next(struct proto *proto)
-{
- return proto->node.next == &proto_list ? NULL :
- list_entry(proto->node.next, struct proto, node);
-}
-
-static inline struct proto *proto_get_idx(loff_t pos)
-{
- struct proto *proto;
- loff_t i = 0;
-
- list_for_each_entry(proto, &proto_list, node)
- if (i++ == pos)
- goto out;
-
- proto = NULL;
-out:
- return proto;
-}
-
static void *proto_seq_start(struct seq_file *seq, loff_t *pos)
{
read_lock(&proto_list_lock);
- return *pos ? proto_get_idx(*pos - 1) : SEQ_START_TOKEN;
+ return seq_list_start_head(&proto_list, *pos);
}
static void *proto_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
- ++*pos;
- return v == SEQ_START_TOKEN ? proto_head() : proto_next(v);
+ return seq_list_next(v, &proto_list, pos);
}
static void proto_seq_stop(struct seq_file *seq, void *v)
static int proto_seq_show(struct seq_file *seq, void *v)
{
- if (v == SEQ_START_TOKEN)
+ if (v == &proto_list)
seq_printf(seq, "%-9s %-4s %-8s %-6s %-5s %-7s %-4s %-10s %s",
"protocol",
"size",
"module",
"cl co di ac io in de sh ss gs se re sp bi br ha uh gp em\n");
else
- proto_seq_printf(seq, v);
+ proto_seq_printf(seq, list_entry(v, struct proto, node));
return 0;
}
/*
* net/dccp/ccids/ccid3.c
*
- * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005-6 Ian McDonald <ian.mcdonald@jandi.co.nz>
+ * Copyright (c) 2005-7 The University of Waikato, Hamilton, New Zealand.
+ * Copyright (c) 2005-7 Ian McDonald <ian.mcdonald@jandi.co.nz>
*
* An implementation of the DCCP protocol
*
static struct dccp_tx_hist *ccid3_tx_hist;
static struct dccp_rx_hist *ccid3_rx_hist;
-static struct dccp_li_hist *ccid3_li_hist;
/*
* Transmitter Half-Connection Routines
* The algorithm is not applicable if RTT < 4 microseconds.
*/
static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx,
- struct timeval *now)
+ ktime_t now)
{
- suseconds_t delta;
u32 quarter_rtts;
if (unlikely(hctx->ccid3hctx_rtt < 4)) /* avoid divide-by-zero */
return;
- delta = timeval_delta(now, &hctx->ccid3hctx_t_last_win_count);
- DCCP_BUG_ON(delta < 0);
-
- quarter_rtts = (u32)delta / (hctx->ccid3hctx_rtt / 4);
+ quarter_rtts = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count);
+ quarter_rtts /= hctx->ccid3hctx_rtt / 4;
if (quarter_rtts > 0) {
- hctx->ccid3hctx_t_last_win_count = *now;
+ hctx->ccid3hctx_t_last_win_count = now;
hctx->ccid3hctx_last_win_count += min_t(u32, quarter_rtts, 5);
hctx->ccid3hctx_last_win_count &= 0xF; /* mod 16 */
-
- ccid3_pr_debug("now at %#X\n", hctx->ccid3hctx_last_win_count);
}
}
{
struct dccp_sock *dp = dccp_sk(sk);
struct ccid3_hc_tx_sock *hctx = ccid3_hc_tx_sk(sk);
- struct timeval now;
- suseconds_t delay;
+ ktime_t now = ktime_get_real();
+ s64 delay;
BUG_ON(hctx == NULL);
if (unlikely(skb->len == 0))
return -EBADMSG;
- dccp_timestamp(sk, &now);
-
switch (hctx->ccid3hctx_state) {
case TFRC_SSTATE_NO_SENT:
sk_reset_timer(sk, &hctx->ccid3hctx_no_feedback_timer,
ccid3_pr_debug("SYN RTT = %uus\n", dp->dccps_syn_rtt);
hctx->ccid3hctx_rtt = dp->dccps_syn_rtt;
hctx->ccid3hctx_x = rfc3390_initial_rate(sk);
- hctx->ccid3hctx_t_ld = now;
+ hctx->ccid3hctx_t_ld = ktime_to_timeval(now);
} else {
/* Sender does not have RTT sample: X = MSS/second */
hctx->ccid3hctx_x = dp->dccps_mss_cache;
break;
case TFRC_SSTATE_NO_FBACK:
case TFRC_SSTATE_FBACK:
- delay = timeval_delta(&hctx->ccid3hctx_t_nom, &now);
+ delay = ktime_us_delta(hctx->ccid3hctx_t_nom, now);
ccid3_pr_debug("delay=%ld\n", (long)delay);
/*
* Scheduling of packet transmissions [RFC 3448, 4.6]
* else
* // send the packet in (t_nom - t_now) milliseconds.
*/
- if (delay - (suseconds_t)hctx->ccid3hctx_delta >= 0)
- return delay / 1000L;
+ if (delay - (s64)hctx->ccid3hctx_delta >= 1000)
+ return (u32)delay / 1000L;
- ccid3_hc_tx_update_win_count(hctx, &now);
+ ccid3_hc_tx_update_win_count(hctx, now);
break;
case TFRC_SSTATE_TERM:
DCCP_BUG("%s(%p) - Illegal state TERM", dccp_role(sk), sk);
hctx->ccid3hctx_idle = 0;
/* set the nominal send time for the next following packet */
- timeval_add_usecs(&hctx->ccid3hctx_t_nom, hctx->ccid3hctx_t_ipi);
-
+ hctx->ccid3hctx_t_nom = ktime_add_us(hctx->ccid3hctx_t_nom,
+ hctx->ccid3hctx_t_ipi);
return 0;
}
return 0;
}
-/* calculate first loss interval
- *
- * returns estimated loss interval in usecs */
-
-static u32 ccid3_hc_rx_calc_first_li(struct sock *sk)
-{
- struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
- struct dccp_rx_hist_entry *entry, *next, *tail = NULL;
- u32 x_recv, p;
- suseconds_t rtt, delta;
- struct timeval tstamp = { 0, };
- int interval = 0;
- int win_count = 0;
- int step = 0;
- u64 fval;
-
- list_for_each_entry_safe(entry, next, &hcrx->ccid3hcrx_hist,
- dccphrx_node) {
- if (dccp_rx_hist_entry_data_packet(entry)) {
- tail = entry;
-
- switch (step) {
- case 0:
- tstamp = entry->dccphrx_tstamp;
- win_count = entry->dccphrx_ccval;
- step = 1;
- break;
- case 1:
- interval = win_count - entry->dccphrx_ccval;
- if (interval < 0)
- interval += TFRC_WIN_COUNT_LIMIT;
- if (interval > 4)
- goto found;
- break;
- }
- }
- }
-
- if (unlikely(step == 0)) {
- DCCP_WARN("%s(%p), packet history has no data packets!\n",
- dccp_role(sk), sk);
- return ~0;
- }
-
- if (unlikely(interval == 0)) {
- DCCP_WARN("%s(%p), Could not find a win_count interval > 0."
- "Defaulting to 1\n", dccp_role(sk), sk);
- interval = 1;
- }
-found:
- if (!tail) {
- DCCP_CRIT("tail is null\n");
- return ~0;
- }
-
- delta = timeval_delta(&tstamp, &tail->dccphrx_tstamp);
- DCCP_BUG_ON(delta < 0);
-
- rtt = delta * 4 / interval;
- ccid3_pr_debug("%s(%p), approximated RTT to %dus\n",
- dccp_role(sk), sk, (int)rtt);
-
- /*
- * Determine the length of the first loss interval via inverse lookup.
- * Assume that X_recv can be computed by the throughput equation
- * s
- * X_recv = --------
- * R * fval
- * Find some p such that f(p) = fval; return 1/p [RFC 3448, 6.3.1].
- */
- if (rtt == 0) { /* would result in divide-by-zero */
- DCCP_WARN("RTT==0\n");
- return ~0;
- }
-
- dccp_timestamp(sk, &tstamp);
- delta = timeval_delta(&tstamp, &hcrx->ccid3hcrx_tstamp_last_feedback);
- DCCP_BUG_ON(delta <= 0);
-
- x_recv = scaled_div32(hcrx->ccid3hcrx_bytes_recv, delta);
- if (x_recv == 0) { /* would also trigger divide-by-zero */
- DCCP_WARN("X_recv==0\n");
- if ((x_recv = hcrx->ccid3hcrx_x_recv) == 0) {
- DCCP_BUG("stored value of X_recv is zero");
- return ~0;
- }
- }
-
- fval = scaled_div(hcrx->ccid3hcrx_s, rtt);
- fval = scaled_div32(fval, x_recv);
- p = tfrc_calc_x_reverse_lookup(fval);
-
- ccid3_pr_debug("%s(%p), receive rate=%u bytes/s, implied "
- "loss rate=%u\n", dccp_role(sk), sk, x_recv, p);
-
- if (p == 0)
- return ~0;
- else
- return 1000000 / p;
-}
-
-static void ccid3_hc_rx_update_li(struct sock *sk, u64 seq_loss, u8 win_loss)
-{
- struct ccid3_hc_rx_sock *hcrx = ccid3_hc_rx_sk(sk);
- struct dccp_li_hist_entry *head;
- u64 seq_temp;
-
- if (list_empty(&hcrx->ccid3hcrx_li_hist)) {
- if (!dccp_li_hist_interval_new(ccid3_li_hist,
- &hcrx->ccid3hcrx_li_hist, seq_loss, win_loss))
- return;
-
- head = list_entry(hcrx->ccid3hcrx_li_hist.next,
- struct dccp_li_hist_entry, dccplih_node);
- head->dccplih_interval = ccid3_hc_rx_calc_first_li(sk);
- } else {
- struct dccp_li_hist_entry *entry;
- struct list_head *tail;
-
- head = list_entry(hcrx->ccid3hcrx_li_hist.next,
- struct dccp_li_hist_entry, dccplih_node);
- /* FIXME win count check removed as was wrong */
- /* should make this check with receive history */
- /* and compare there as per section 10.2 of RFC4342 */
-
- /* new loss event detected */
- /* calculate last interval length */
- seq_temp = dccp_delta_seqno(head->dccplih_seqno, seq_loss);
- entry = dccp_li_hist_entry_new(ccid3_li_hist, GFP_ATOMIC);
-
- if (entry == NULL) {
- DCCP_BUG("out of memory - can not allocate entry");
- return;
- }
-
- list_add(&entry->dccplih_node, &hcrx->ccid3hcrx_li_hist);
-
- tail = hcrx->ccid3hcrx_li_hist.prev;
- list_del(tail);
- kmem_cache_free(ccid3_li_hist->dccplih_slab, tail);
-
- /* Create the newest interval */
- entry->dccplih_seqno = seq_loss;
- entry->dccplih_interval = seq_temp;
- entry->dccplih_win_count = win_loss;
- }
-}
-
static int ccid3_hc_rx_detect_loss(struct sock *sk,
struct dccp_rx_hist_entry *packet)
{
while (dccp_delta_seqno(hcrx->ccid3hcrx_seqno_nonloss, seqno)
> TFRC_RECV_NUM_LATE_LOSS) {
loss = 1;
- ccid3_hc_rx_update_li(sk, hcrx->ccid3hcrx_seqno_nonloss,
- hcrx->ccid3hcrx_ccval_nonloss);
+ dccp_li_update_li(sk,
+ &hcrx->ccid3hcrx_li_hist,
+ &hcrx->ccid3hcrx_hist,
+ &hcrx->ccid3hcrx_tstamp_last_feedback,
+ hcrx->ccid3hcrx_s,
+ hcrx->ccid3hcrx_bytes_recv,
+ hcrx->ccid3hcrx_x_recv,
+ hcrx->ccid3hcrx_seqno_nonloss,
+ hcrx->ccid3hcrx_ccval_nonloss);
tmp_seqno = hcrx->ccid3hcrx_seqno_nonloss;
dccp_inc_seqno(&tmp_seqno);
hcrx->ccid3hcrx_seqno_nonloss = tmp_seqno;
dccp_rx_hist_purge(ccid3_rx_hist, &hcrx->ccid3hcrx_hist);
/* Empty loss interval history */
- dccp_li_hist_purge(ccid3_li_hist, &hcrx->ccid3hcrx_li_hist);
+ dccp_li_hist_purge(&hcrx->ccid3hcrx_li_hist);
}
static void ccid3_hc_rx_get_info(struct sock *sk, struct tcp_info *info)
if (ccid3_tx_hist == NULL)
goto out_free_rx;
- ccid3_li_hist = dccp_li_hist_new("ccid3");
- if (ccid3_li_hist == NULL)
- goto out_free_tx;
-
rc = ccid_register(&ccid3);
if (rc != 0)
- goto out_free_loss_interval_history;
+ goto out_free_tx;
out:
return rc;
-out_free_loss_interval_history:
- dccp_li_hist_delete(ccid3_li_hist);
- ccid3_li_hist = NULL;
out_free_tx:
dccp_tx_hist_delete(ccid3_tx_hist);
ccid3_tx_hist = NULL;
dccp_rx_hist_delete(ccid3_rx_hist);
ccid3_rx_hist = NULL;
}
- if (ccid3_li_hist != NULL) {
- dccp_li_hist_delete(ccid3_li_hist);
- ccid3_li_hist = NULL;
- }
}
module_exit(ccid3_module_exit);
#ifndef _DCCP_CCID3_H_
#define _DCCP_CCID3_H_
+#include <linux/ktime.h>
#include <linux/list.h>
#include <linux/time.h>
#include <linux/types.h>
enum ccid3_hc_tx_states ccid3hctx_state:8;
u8 ccid3hctx_last_win_count;
u8 ccid3hctx_idle;
- struct timeval ccid3hctx_t_last_win_count;
+ ktime_t ccid3hctx_t_last_win_count;
struct timer_list ccid3hctx_no_feedback_timer;
struct timeval ccid3hctx_t_ld;
- struct timeval ccid3hctx_t_nom;
+ ktime_t ccid3hctx_t_nom;
u32 ccid3hctx_delta;
struct list_head ccid3hctx_hist;
struct ccid3_options_received ccid3hctx_options_received;
/*
* net/dccp/ccids/lib/loss_interval.c
*
- * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005-6 Ian McDonald <ian.mcdonald@jandi.co.nz>
+ * Copyright (c) 2005-7 The University of Waikato, Hamilton, New Zealand.
+ * Copyright (c) 2005-7 Ian McDonald <ian.mcdonald@jandi.co.nz>
* Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*
* This program is free software; you can redistribute it and/or modify
#include <net/sock.h>
#include "../../dccp.h"
#include "loss_interval.h"
+#include "packet_history.h"
+#include "tfrc.h"
-struct dccp_li_hist *dccp_li_hist_new(const char *name)
-{
- struct dccp_li_hist *hist = kmalloc(sizeof(*hist), GFP_ATOMIC);
- static const char dccp_li_hist_mask[] = "li_hist_%s";
- char *slab_name;
-
- if (hist == NULL)
- goto out;
-
- slab_name = kmalloc(strlen(name) + sizeof(dccp_li_hist_mask) - 1,
- GFP_ATOMIC);
- if (slab_name == NULL)
- goto out_free_hist;
-
- sprintf(slab_name, dccp_li_hist_mask, name);
- hist->dccplih_slab = kmem_cache_create(slab_name,
- sizeof(struct dccp_li_hist_entry),
- 0, SLAB_HWCACHE_ALIGN,
- NULL, NULL);
- if (hist->dccplih_slab == NULL)
- goto out_free_slab_name;
-out:
- return hist;
-out_free_slab_name:
- kfree(slab_name);
-out_free_hist:
- kfree(hist);
- hist = NULL;
- goto out;
-}
+#define DCCP_LI_HIST_IVAL_F_LENGTH 8
-EXPORT_SYMBOL_GPL(dccp_li_hist_new);
+struct dccp_li_hist_entry {
+ struct list_head dccplih_node;
+ u64 dccplih_seqno:48,
+ dccplih_win_count:4;
+ u32 dccplih_interval;
+};
-void dccp_li_hist_delete(struct dccp_li_hist *hist)
-{
- const char* name = kmem_cache_name(hist->dccplih_slab);
+static struct kmem_cache *dccp_li_cachep __read_mostly;
- kmem_cache_destroy(hist->dccplih_slab);
- kfree(name);
- kfree(hist);
+static inline struct dccp_li_hist_entry *dccp_li_hist_entry_new(const gfp_t prio)
+{
+ return kmem_cache_alloc(dccp_li_cachep, prio);
}
-EXPORT_SYMBOL_GPL(dccp_li_hist_delete);
+static inline void dccp_li_hist_entry_delete(struct dccp_li_hist_entry *entry)
+{
+ if (entry != NULL)
+ kmem_cache_free(dccp_li_cachep, entry);
+}
-void dccp_li_hist_purge(struct dccp_li_hist *hist, struct list_head *list)
+void dccp_li_hist_purge(struct list_head *list)
{
struct dccp_li_hist_entry *entry, *next;
list_for_each_entry_safe(entry, next, list, dccplih_node) {
list_del_init(&entry->dccplih_node);
- kmem_cache_free(hist->dccplih_slab, entry);
+ kmem_cache_free(dccp_li_cachep, entry);
}
}
EXPORT_SYMBOL_GPL(dccp_li_hist_calc_i_mean);
-int dccp_li_hist_interval_new(struct dccp_li_hist *hist,
- struct list_head *list, const u64 seq_loss, const u8 win_loss)
+static int dccp_li_hist_interval_new(struct list_head *list,
+ const u64 seq_loss, const u8 win_loss)
{
struct dccp_li_hist_entry *entry;
int i;
for (i = 0; i < DCCP_LI_HIST_IVAL_F_LENGTH; i++) {
- entry = dccp_li_hist_entry_new(hist, GFP_ATOMIC);
+ entry = dccp_li_hist_entry_new(GFP_ATOMIC);
if (entry == NULL) {
- dccp_li_hist_purge(hist, list);
+ dccp_li_hist_purge(list);
DCCP_BUG("loss interval list entry is NULL");
return 0;
}
return 1;
}
-EXPORT_SYMBOL_GPL(dccp_li_hist_interval_new);
+/* calculate first loss interval
+ *
+ * returns estimated loss interval in usecs */
+static u32 dccp_li_calc_first_li(struct sock *sk,
+ struct list_head *hist_list,
+ struct timeval *last_feedback,
+ u16 s, u32 bytes_recv,
+ u32 previous_x_recv)
+{
+ struct dccp_rx_hist_entry *entry, *next, *tail = NULL;
+ u32 x_recv, p;
+ suseconds_t rtt, delta;
+ struct timeval tstamp = { 0, 0 };
+ int interval = 0;
+ int win_count = 0;
+ int step = 0;
+ u64 fval;
+
+ list_for_each_entry_safe(entry, next, hist_list, dccphrx_node) {
+ if (dccp_rx_hist_entry_data_packet(entry)) {
+ tail = entry;
+
+ switch (step) {
+ case 0:
+ tstamp = entry->dccphrx_tstamp;
+ win_count = entry->dccphrx_ccval;
+ step = 1;
+ break;
+ case 1:
+ interval = win_count - entry->dccphrx_ccval;
+ if (interval < 0)
+ interval += TFRC_WIN_COUNT_LIMIT;
+ if (interval > 4)
+ goto found;
+ break;
+ }
+ }
+ }
+
+ if (unlikely(step == 0)) {
+ DCCP_WARN("%s(%p), packet history has no data packets!\n",
+ dccp_role(sk), sk);
+ return ~0;
+ }
+
+ if (unlikely(interval == 0)) {
+ DCCP_WARN("%s(%p), Could not find a win_count interval > 0."
+ "Defaulting to 1\n", dccp_role(sk), sk);
+ interval = 1;
+ }
+found:
+ if (!tail) {
+ DCCP_CRIT("tail is null\n");
+ return ~0;
+ }
+
+ delta = timeval_delta(&tstamp, &tail->dccphrx_tstamp);
+ DCCP_BUG_ON(delta < 0);
+
+ rtt = delta * 4 / interval;
+ dccp_pr_debug("%s(%p), approximated RTT to %dus\n",
+ dccp_role(sk), sk, (int)rtt);
+
+ /*
+ * Determine the length of the first loss interval via inverse lookup.
+ * Assume that X_recv can be computed by the throughput equation
+ * s
+ * X_recv = --------
+ * R * fval
+ * Find some p such that f(p) = fval; return 1/p [RFC 3448, 6.3.1].
+ */
+ if (rtt == 0) { /* would result in divide-by-zero */
+ DCCP_WARN("RTT==0\n");
+ return ~0;
+ }
+
+ dccp_timestamp(sk, &tstamp);
+ delta = timeval_delta(&tstamp, last_feedback);
+ DCCP_BUG_ON(delta <= 0);
+
+ x_recv = scaled_div32(bytes_recv, delta);
+ if (x_recv == 0) { /* would also trigger divide-by-zero */
+ DCCP_WARN("X_recv==0\n");
+ if (previous_x_recv == 0) {
+ DCCP_BUG("stored value of X_recv is zero");
+ return ~0;
+ }
+ x_recv = previous_x_recv;
+ }
+
+ fval = scaled_div(s, rtt);
+ fval = scaled_div32(fval, x_recv);
+ p = tfrc_calc_x_reverse_lookup(fval);
+
+ dccp_pr_debug("%s(%p), receive rate=%u bytes/s, implied "
+ "loss rate=%u\n", dccp_role(sk), sk, x_recv, p);
+
+ if (p == 0)
+ return ~0;
+ else
+ return 1000000 / p;
+}
+
+void dccp_li_update_li(struct sock *sk,
+ struct list_head *li_hist_list,
+ struct list_head *hist_list,
+ struct timeval *last_feedback, u16 s, u32 bytes_recv,
+ u32 previous_x_recv, u64 seq_loss, u8 win_loss)
+{
+ struct dccp_li_hist_entry *head;
+ u64 seq_temp;
+
+ if (list_empty(li_hist_list)) {
+ if (!dccp_li_hist_interval_new(li_hist_list, seq_loss,
+ win_loss))
+ return;
+
+ head = list_entry(li_hist_list->next, struct dccp_li_hist_entry,
+ dccplih_node);
+ head->dccplih_interval = dccp_li_calc_first_li(sk, hist_list,
+ last_feedback,
+ s, bytes_recv,
+ previous_x_recv);
+ } else {
+ struct dccp_li_hist_entry *entry;
+ struct list_head *tail;
+
+ head = list_entry(li_hist_list->next, struct dccp_li_hist_entry,
+ dccplih_node);
+ /* FIXME win count check removed as was wrong */
+ /* should make this check with receive history */
+ /* and compare there as per section 10.2 of RFC4342 */
+
+ /* new loss event detected */
+ /* calculate last interval length */
+ seq_temp = dccp_delta_seqno(head->dccplih_seqno, seq_loss);
+ entry = dccp_li_hist_entry_new(GFP_ATOMIC);
+
+ if (entry == NULL) {
+ DCCP_BUG("out of memory - can not allocate entry");
+ return;
+ }
+
+ list_add(&entry->dccplih_node, li_hist_list);
+
+ tail = li_hist_list->prev;
+ list_del(tail);
+ kmem_cache_free(dccp_li_cachep, tail);
+
+ /* Create the newest interval */
+ entry->dccplih_seqno = seq_loss;
+ entry->dccplih_interval = seq_temp;
+ entry->dccplih_win_count = win_loss;
+ }
+}
+
+EXPORT_SYMBOL_GPL(dccp_li_update_li);
+
+static __init int dccp_li_init(void)
+{
+ dccp_li_cachep = kmem_cache_create("dccp_li_hist",
+ sizeof(struct dccp_li_hist_entry),
+ 0, SLAB_HWCACHE_ALIGN, NULL, NULL);
+ return dccp_li_cachep == NULL ? -ENOBUFS : 0;
+}
+
+static __exit void dccp_li_exit(void)
+{
+ kmem_cache_destroy(dccp_li_cachep);
+}
+
+module_init(dccp_li_init);
+module_exit(dccp_li_exit);
/*
* net/dccp/ccids/lib/loss_interval.h
*
- * Copyright (c) 2005 The University of Waikato, Hamilton, New Zealand.
- * Copyright (c) 2005 Ian McDonald <ian.mcdonald@jandi.co.nz>
+ * Copyright (c) 2005-7 The University of Waikato, Hamilton, New Zealand.
+ * Copyright (c) 2005-7 Ian McDonald <ian.mcdonald@jandi.co.nz>
* Copyright (c) 2005 Arnaldo Carvalho de Melo <acme@conectiva.com.br>
*
* This program is free software; you can redistribute it and/or modify it
*/
#include <linux/list.h>
-#include <linux/slab.h>
#include <linux/time.h>
-#define DCCP_LI_HIST_IVAL_F_LENGTH 8
-
-struct dccp_li_hist {
- struct kmem_cache *dccplih_slab;
-};
-
-extern struct dccp_li_hist *dccp_li_hist_new(const char *name);
-extern void dccp_li_hist_delete(struct dccp_li_hist *hist);
-
-struct dccp_li_hist_entry {
- struct list_head dccplih_node;
- u64 dccplih_seqno:48,
- dccplih_win_count:4;
- u32 dccplih_interval;
-};
-
-static inline struct dccp_li_hist_entry *
- dccp_li_hist_entry_new(struct dccp_li_hist *hist,
- const gfp_t prio)
-{
- return kmem_cache_alloc(hist->dccplih_slab, prio);
-}
-
-static inline void dccp_li_hist_entry_delete(struct dccp_li_hist *hist,
- struct dccp_li_hist_entry *entry)
-{
- if (entry != NULL)
- kmem_cache_free(hist->dccplih_slab, entry);
-}
-
-extern void dccp_li_hist_purge(struct dccp_li_hist *hist,
- struct list_head *list);
+extern void dccp_li_hist_purge(struct list_head *list);
extern u32 dccp_li_hist_calc_i_mean(struct list_head *list);
-extern int dccp_li_hist_interval_new(struct dccp_li_hist *hist,
- struct list_head *list, const u64 seq_loss, const u8 win_loss);
+extern void dccp_li_update_li(struct sock *sk,
+ struct list_head *li_hist_list,
+ struct list_head *hist_list,
+ struct timeval *last_feedback, u16 s,
+ u32 bytes_recv, u32 previous_x_recv,
+ u64 seq_loss, u8 win_loss);
#endif /* _DCCP_LI_HIST_ */
/*
* Checksumming routines
*/
-static inline int dccp_csum_coverage(const struct sk_buff *skb)
+static inline unsigned int dccp_csum_coverage(const struct sk_buff *skb)
{
const struct dccp_hdr* dh = dccp_hdr(skb);
static inline void dccp_csum_outgoing(struct sk_buff *skb)
{
- int cov = dccp_csum_coverage(skb);
+ unsigned int cov = dccp_csum_coverage(skb);
if (cov >= skb->len)
dccp_hdr(skb)->dccph_cscov = 0;
if (dst == NULL) {
opt = np->opt;
- if (opt == NULL &&
- np->rxopt.bits.osrcrt == 2 &&
- ireq6->pktopts) {
- struct sk_buff *pktopts = ireq6->pktopts;
- struct inet6_skb_parm *rxopt = IP6CB(pktopts);
-
- if (rxopt->srcrt)
- opt = ipv6_invert_rthdr(sk,
- (struct ipv6_rt_hdr *)(skb_network_header(pktopts) +
- rxopt->srcrt));
- }
if (opt != NULL && opt->srcrt != NULL) {
const struct rt0_hdr *rt0 = (struct rt0_hdr *)opt->srcrt;
if (sk_acceptq_is_full(sk))
goto out_overflow;
- if (np->rxopt.bits.osrcrt == 2 && opt == NULL && ireq6->pktopts) {
- const struct inet6_skb_parm *rxopt = IP6CB(ireq6->pktopts);
-
- if (rxopt->srcrt)
- opt = ipv6_invert_rthdr(sk,
- (struct ipv6_rt_hdr *)(skb_network_header(ireq6->pktopts) +
- rxopt->srcrt));
- }
-
if (dst == NULL) {
struct in6_addr *final_p = NULL, final;
struct flowi fl;
return 0;
}
-static struct seq_operations dn_socket_seq_ops = {
+static const struct seq_operations dn_socket_seq_ops = {
.start = dn_socket_seq_start,
.next = dn_socket_seq_next,
.stop = dn_socket_seq_stop,
if (ifa->ifa_local != dn_eth2dn(dev->dev_addr)) {
dn_dn2eth(mac_addr, ifa->ifa_local);
dev_mc_add(dev, mac_addr, ETH_ALEN, 0);
- dev_mc_upload(dev);
}
}
else
dev_mc_add(dev, dn_rt_all_rt_mcast, ETH_ALEN, 0);
- dev_mc_upload(dev);
-
dn_db->use_long = 1;
return 0;
return 0;
}
-static struct seq_operations dn_dev_seq_ops = {
+static const struct seq_operations dn_dev_seq_ops = {
.start = dn_dev_seq_start,
.next = dn_dev_seq_next,
.stop = dn_dev_seq_stop,
NEIGH_SEQ_NEIGH_ONLY);
}
-static struct seq_operations dn_neigh_seq_ops = {
+static const struct seq_operations dn_neigh_seq_ops = {
.start = dn_neigh_seq_start,
.next = neigh_seq_next,
.stop = neigh_seq_stop,
return 0;
}
-static struct seq_operations dn_rt_cache_seq_ops = {
+static const struct seq_operations dn_rt_cache_seq_ops = {
.start = dn_rt_cache_seq_start,
.next = dn_rt_cache_seq_next,
.stop = dn_rt_cache_seq_stop,
static int eth_mac_addr(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
+
if (netif_running(dev))
return -EBUSY;
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EADDRNOTAVAIL;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
return 0;
}
EXPORT_SYMBOL(ether_setup);
/**
- * alloc_etherdev - Allocates and sets up an Ethernet device
+ * alloc_etherdev_mq - Allocates and sets up an Ethernet device
* @sizeof_priv: Size of additional driver-private structure to be allocated
* for this Ethernet device
+ * @queue_count: The number of queues this device has.
*
* Fill in the fields of the device structure with Ethernet-generic
* values. Basically does everything except registering the device.
* this private data area.
*/
-struct net_device *alloc_etherdev(int sizeof_priv)
+struct net_device *alloc_etherdev_mq(int sizeof_priv, unsigned int queue_count)
{
- return alloc_netdev(sizeof_priv, "eth%d", ether_setup);
+ return alloc_netdev_mq(sizeof_priv, "eth%d", ether_setup, queue_count);
}
-EXPORT_SYMBOL(alloc_etherdev);
+EXPORT_SYMBOL(alloc_etherdev_mq);
equal "cost" and chooses one of them in a non-deterministic fashion
if a matching packet arrives.
-config IP_ROUTE_MULTIPATH_CACHED
- bool "IP: equal cost multipath with caching support (EXPERIMENTAL)"
- depends on IP_ROUTE_MULTIPATH
- help
- Normally, equal cost multipath routing is not supported by the
- routing cache. If you say Y here, alternative routes are cached
- and on cache lookup a route is chosen in a configurable fashion.
-
- If unsure, say N.
-
-config IP_ROUTE_MULTIPATH_RR
- tristate "MULTIPATH: round robin algorithm"
- depends on IP_ROUTE_MULTIPATH_CACHED
- help
- Multipath routes are chosen according to Round Robin
-
-config IP_ROUTE_MULTIPATH_RANDOM
- tristate "MULTIPATH: random algorithm"
- depends on IP_ROUTE_MULTIPATH_CACHED
- help
- Multipath routes are chosen in a random fashion. Actually,
- there is no weight for a route. The advantage of this policy
- is that it is implemented stateless and therefore introduces only
- a very small delay.
-
-config IP_ROUTE_MULTIPATH_WRANDOM
- tristate "MULTIPATH: weighted random algorithm"
- depends on IP_ROUTE_MULTIPATH_CACHED
- help
- Multipath routes are chosen in a weighted random fashion.
- The per route weights are the weights visible via ip route 2. As the
- corresponding state management introduces some overhead routing delay
- is increased.
-
-config IP_ROUTE_MULTIPATH_DRR
- tristate "MULTIPATH: interface round robin algorithm"
- depends on IP_ROUTE_MULTIPATH_CACHED
- help
- Connections are distributed in a round robin fashion over the
- available interfaces. This policy makes sense if the connections
- should be primarily distributed on interfaces and not on routes.
-
config IP_ROUTE_VERBOSE
bool "IP: verbose route monitoring"
depends on IP_ADVANCED_ROUTER
obj-$(CONFIG_INET_XFRM_MODE_TRANSPORT) += xfrm4_mode_transport.o
obj-$(CONFIG_INET_XFRM_MODE_TUNNEL) += xfrm4_mode_tunnel.o
obj-$(CONFIG_IP_PNP) += ipconfig.o
-obj-$(CONFIG_IP_ROUTE_MULTIPATH_RR) += multipath_rr.o
-obj-$(CONFIG_IP_ROUTE_MULTIPATH_RANDOM) += multipath_random.o
-obj-$(CONFIG_IP_ROUTE_MULTIPATH_WRANDOM) += multipath_wrandom.o
-obj-$(CONFIG_IP_ROUTE_MULTIPATH_DRR) += multipath_drr.o
obj-$(CONFIG_NETFILTER) += netfilter.o netfilter/
obj-$(CONFIG_IP_VS) += ipvs/
obj-$(CONFIG_INET_DIAG) += inet_diag.o
-obj-$(CONFIG_IP_ROUTE_MULTIPATH_CACHED) += multipath.o
obj-$(CONFIG_INET_TCP_DIAG) += tcp_diag.o
obj-$(CONFIG_NET_TCPPROBE) += tcp_probe.o
obj-$(CONFIG_TCP_CONG_BIC) += tcp_bic.o
int ihl;
int id;
+ if (!(features & NETIF_F_V4_CSUM))
+ features &= ~NETIF_F_SG;
+
if (unlikely(skb_shinfo(skb)->gso_type &
~(SKB_GSO_TCPV4 |
SKB_GSO_UDP |
module_init(ah4_init);
module_exit(ah4_fini);
MODULE_LICENSE("GPL");
+MODULE_ALIAS_XFRM_TYPE(AF_INET, XFRM_PROTO_AH);
module_init(esp4_init);
module_exit(esp4_fini);
MODULE_LICENSE("GPL");
+MODULE_ALIAS_XFRM_TYPE(AF_INET, XFRM_PROTO_ESP);
[RTA_MULTIPATH] = { .len = sizeof(struct rtnexthop) },
[RTA_PROTOINFO] = { .type = NLA_U32 },
[RTA_FLOW] = { .type = NLA_U32 },
- [RTA_MP_ALGO] = { .type = NLA_U32 },
};
static int rtm_to_fib_config(struct sk_buff *skb, struct nlmsghdr *nlh,
case RTA_FLOW:
cfg->fc_flow = nla_get_u32(attr);
break;
- case RTA_MP_ALGO:
- cfg->fc_mp_alg = nla_get_u32(attr);
- break;
case RTA_TABLE:
cfg->fc_table = nla_get_u32(attr);
break;
#include <net/tcp.h>
#include <net/sock.h>
#include <net/ip_fib.h>
-#include <net/ip_mp_alg.h>
#include <net/netlink.h>
#include <net/nexthop.h>
goto err_inval;
}
#endif
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- if (cfg->fc_mp_alg) {
- if (cfg->fc_mp_alg < IP_MP_ALG_NONE ||
- cfg->fc_mp_alg > IP_MP_ALG_MAX)
- goto err_inval;
- }
-#endif
err = -ENOBUFS;
if (fib_info_cnt >= fib_hash_size) {
#endif
}
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- fi->fib_mp_alg = cfg->fc_mp_alg;
-#endif
-
if (fib_props[cfg->fc_type].error) {
if (cfg->fc_gw || cfg->fc_oif || cfg->fc_mp)
goto err_inval;
res->type = fa->fa_type;
res->scope = fa->fa_scope;
res->fi = fa->fa_info;
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- res->netmask = mask;
- res->network = zone & inet_make_mask(prefixlen);
-#endif
atomic_inc(&res->fi->fib_clntref);
return 0;
}
max_headroom = LL_RESERVED_SPACE(tdev) + gre_hlen;
- if (skb_headroom(skb) < max_headroom || skb_cloned(skb) || skb_shared(skb)) {
+ if (skb_headroom(skb) < max_headroom || skb_shared(skb)||
+ (skb_cloned(skb) && !skb_clone_writable(skb, 0))) {
struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
if (!new_skb) {
ip_rt_put(rt);
to->tc_index = from->tc_index;
#endif
nf_copy(to, from);
+#if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+ defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
+ to->nf_trace = from->nf_trace;
+#endif
#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
to->ipvs_property = from->ipvs_property;
#endif
*/
if (transhdrlen &&
length + fragheaderlen <= mtu &&
- rt->u.dst.dev->features & NETIF_F_ALL_CSUM &&
+ rt->u.dst.dev->features & NETIF_F_V4_CSUM &&
!exthdrlen)
csummode = CHECKSUM_PARTIAL;
MODULE_DESCRIPTION("IP Payload Compression Protocol (IPComp) - RFC3173");
MODULE_AUTHOR("James Morris <jmorris@intercode.com.au>");
+MODULE_ALIAS_XFRM_TYPE(AF_INET, XFRM_PROTO_COMP);
*/
max_headroom = (LL_RESERVED_SPACE(tdev)+sizeof(struct iphdr));
- if (skb_headroom(skb) < max_headroom || skb_cloned(skb) || skb_shared(skb)) {
+ if (skb_headroom(skb) < max_headroom || skb_shared(skb) ||
+ (skb_cloned(skb) && !skb_clone_writable(skb, 0))) {
struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
if (!new_skb) {
ip_rt_put(rt);
return 0;
}
-static struct seq_operations ip_vs_app_seq_ops = {
+static const struct seq_operations ip_vs_app_seq_ops = {
.start = ip_vs_app_seq_start,
.next = ip_vs_app_seq_next,
.stop = ip_vs_app_seq_stop,
return 0;
}
-static struct seq_operations ip_vs_conn_seq_ops = {
+static const struct seq_operations ip_vs_conn_seq_ops = {
.start = ip_vs_conn_seq_start,
.next = ip_vs_conn_seq_next,
.stop = ip_vs_conn_seq_stop,
return 0;
}
-static struct seq_operations ip_vs_info_seq_ops = {
+static const struct seq_operations ip_vs_info_seq_ops = {
.start = ip_vs_info_seq_start,
.next = ip_vs_info_seq_next,
.stop = ip_vs_info_seq_stop,
+++ /dev/null
-/* multipath.c: IPV4 multipath algorithm support.
- *
- * Copyright (C) 2004, 2005 Einar Lueck <elueck@de.ibm.com>
- * Copyright (C) 2005 David S. Miller <davem@davemloft.net>
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <linux/spinlock.h>
-
-#include <net/ip_mp_alg.h>
-
-static DEFINE_SPINLOCK(alg_table_lock);
-struct ip_mp_alg_ops *ip_mp_alg_table[IP_MP_ALG_MAX + 1];
-
-int multipath_alg_register(struct ip_mp_alg_ops *ops, enum ip_mp_alg n)
-{
- struct ip_mp_alg_ops **slot;
- int err;
-
- if (n < IP_MP_ALG_NONE || n > IP_MP_ALG_MAX ||
- !ops->mp_alg_select_route)
- return -EINVAL;
-
- spin_lock(&alg_table_lock);
- slot = &ip_mp_alg_table[n];
- if (*slot != NULL) {
- err = -EBUSY;
- } else {
- *slot = ops;
- err = 0;
- }
- spin_unlock(&alg_table_lock);
-
- return err;
-}
-EXPORT_SYMBOL(multipath_alg_register);
-
-void multipath_alg_unregister(struct ip_mp_alg_ops *ops, enum ip_mp_alg n)
-{
- struct ip_mp_alg_ops **slot;
-
- if (n < IP_MP_ALG_NONE || n > IP_MP_ALG_MAX)
- return;
-
- spin_lock(&alg_table_lock);
- slot = &ip_mp_alg_table[n];
- if (*slot == ops)
- *slot = NULL;
- spin_unlock(&alg_table_lock);
-
- synchronize_net();
-}
-EXPORT_SYMBOL(multipath_alg_unregister);
+++ /dev/null
-/*
- * Device round robin policy for multipath.
- *
- *
- * Version: $Id: multipath_drr.c,v 1.1.2.1 2004/09/16 07:42:34 elueck Exp $
- *
- * Authors: Einar Lueck <elueck@de.ibm.com><lkml@einar-lueck.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/fcntl.h>
-#include <linux/stat.h>
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/igmp.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-#include <linux/mroute.h>
-#include <linux/init.h>
-#include <net/ip.h>
-#include <net/protocol.h>
-#include <linux/skbuff.h>
-#include <net/sock.h>
-#include <net/icmp.h>
-#include <net/udp.h>
-#include <net/raw.h>
-#include <linux/notifier.h>
-#include <linux/if_arp.h>
-#include <linux/netfilter_ipv4.h>
-#include <net/ipip.h>
-#include <net/checksum.h>
-#include <net/ip_mp_alg.h>
-
-struct multipath_device {
- int ifi; /* interface index of device */
- atomic_t usecount;
- int allocated;
-};
-
-#define MULTIPATH_MAX_DEVICECANDIDATES 10
-
-static struct multipath_device state[MULTIPATH_MAX_DEVICECANDIDATES];
-static DEFINE_SPINLOCK(state_lock);
-
-static int inline __multipath_findslot(void)
-{
- int i;
-
- for (i = 0; i < MULTIPATH_MAX_DEVICECANDIDATES; i++) {
- if (state[i].allocated == 0)
- return i;
- }
- return -1;
-}
-
-static int inline __multipath_finddev(int ifindex)
-{
- int i;
-
- for (i = 0; i < MULTIPATH_MAX_DEVICECANDIDATES; i++) {
- if (state[i].allocated != 0 &&
- state[i].ifi == ifindex)
- return i;
- }
- return -1;
-}
-
-static int drr_dev_event(struct notifier_block *this,
- unsigned long event, void *ptr)
-{
- struct net_device *dev = ptr;
- int devidx;
-
- switch (event) {
- case NETDEV_UNREGISTER:
- case NETDEV_DOWN:
- spin_lock_bh(&state_lock);
-
- devidx = __multipath_finddev(dev->ifindex);
- if (devidx != -1) {
- state[devidx].allocated = 0;
- state[devidx].ifi = 0;
- atomic_set(&state[devidx].usecount, 0);
- }
-
- spin_unlock_bh(&state_lock);
- break;
- }
-
- return NOTIFY_DONE;
-}
-
-static struct notifier_block drr_dev_notifier = {
- .notifier_call = drr_dev_event,
-};
-
-
-static void drr_safe_inc(atomic_t *usecount)
-{
- int n;
-
- atomic_inc(usecount);
-
- n = atomic_read(usecount);
- if (n <= 0) {
- int i;
-
- spin_lock_bh(&state_lock);
-
- for (i = 0; i < MULTIPATH_MAX_DEVICECANDIDATES; i++)
- atomic_set(&state[i].usecount, 0);
-
- spin_unlock_bh(&state_lock);
- }
-}
-
-static void drr_select_route(const struct flowi *flp,
- struct rtable *first, struct rtable **rp)
-{
- struct rtable *nh, *result, *cur_min;
- int min_usecount = -1;
- int devidx = -1;
- int cur_min_devidx = -1;
-
- /* 1. make sure all alt. nexthops have the same GC related data */
- /* 2. determine the new candidate to be returned */
- result = NULL;
- cur_min = NULL;
- for (nh = rcu_dereference(first); nh;
- nh = rcu_dereference(nh->u.dst.rt_next)) {
- if ((nh->u.dst.flags & DST_BALANCED) != 0 &&
- multipath_comparekeys(&nh->fl, flp)) {
- int nh_ifidx = nh->u.dst.dev->ifindex;
-
- nh->u.dst.lastuse = jiffies;
- nh->u.dst.__use++;
- if (result != NULL)
- continue;
-
- /* search for the output interface */
-
- /* this is not SMP safe, only add/remove are
- * SMP safe as wrong usecount updates have no big
- * impact
- */
- devidx = __multipath_finddev(nh_ifidx);
- if (devidx == -1) {
- /* add the interface to the array
- * SMP safe
- */
- spin_lock_bh(&state_lock);
-
- /* due to SMP: search again */
- devidx = __multipath_finddev(nh_ifidx);
- if (devidx == -1) {
- /* add entry for device */
- devidx = __multipath_findslot();
- if (devidx == -1) {
- /* unlikely but possible */
- continue;
- }
-
- state[devidx].allocated = 1;
- state[devidx].ifi = nh_ifidx;
- atomic_set(&state[devidx].usecount, 0);
- min_usecount = 0;
- }
-
- spin_unlock_bh(&state_lock);
- }
-
- if (min_usecount == 0) {
- /* if the device has not been used it is
- * the primary target
- */
- drr_safe_inc(&state[devidx].usecount);
- result = nh;
- } else {
- int count =
- atomic_read(&state[devidx].usecount);
-
- if (min_usecount == -1 ||
- count < min_usecount) {
- cur_min = nh;
- cur_min_devidx = devidx;
- min_usecount = count;
- }
- }
- }
- }
-
- if (!result) {
- if (cur_min) {
- drr_safe_inc(&state[cur_min_devidx].usecount);
- result = cur_min;
- } else {
- result = first;
- }
- }
-
- *rp = result;
-}
-
-static struct ip_mp_alg_ops drr_ops = {
- .mp_alg_select_route = drr_select_route,
-};
-
-static int __init drr_init(void)
-{
- int err = register_netdevice_notifier(&drr_dev_notifier);
-
- if (err)
- return err;
-
- err = multipath_alg_register(&drr_ops, IP_MP_ALG_DRR);
- if (err)
- goto fail;
-
- return 0;
-
-fail:
- unregister_netdevice_notifier(&drr_dev_notifier);
- return err;
-}
-
-static void __exit drr_exit(void)
-{
- unregister_netdevice_notifier(&drr_dev_notifier);
- multipath_alg_unregister(&drr_ops, IP_MP_ALG_DRR);
-}
-
-module_init(drr_init);
-module_exit(drr_exit);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Random policy for multipath.
- *
- *
- * Version: $Id: multipath_random.c,v 1.1.2.3 2004/09/21 08:42:11 elueck Exp $
- *
- * Authors: Einar Lueck <elueck@de.ibm.com><lkml@einar-lueck.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/fcntl.h>
-#include <linux/stat.h>
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/igmp.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-#include <linux/mroute.h>
-#include <linux/init.h>
-#include <linux/random.h>
-#include <net/ip.h>
-#include <net/protocol.h>
-#include <linux/skbuff.h>
-#include <net/sock.h>
-#include <net/icmp.h>
-#include <net/udp.h>
-#include <net/raw.h>
-#include <linux/notifier.h>
-#include <linux/if_arp.h>
-#include <linux/netfilter_ipv4.h>
-#include <net/ipip.h>
-#include <net/checksum.h>
-#include <net/ip_mp_alg.h>
-
-#define MULTIPATH_MAX_CANDIDATES 40
-
-static void random_select_route(const struct flowi *flp,
- struct rtable *first,
- struct rtable **rp)
-{
- struct rtable *rt;
- struct rtable *decision;
- unsigned char candidate_count = 0;
-
- /* count all candidate */
- for (rt = rcu_dereference(first); rt;
- rt = rcu_dereference(rt->u.dst.rt_next)) {
- if ((rt->u.dst.flags & DST_BALANCED) != 0 &&
- multipath_comparekeys(&rt->fl, flp))
- ++candidate_count;
- }
-
- /* choose a random candidate */
- decision = first;
- if (candidate_count > 1) {
- unsigned char i = 0;
- unsigned char candidate_no = (unsigned char)
- (random32() % candidate_count);
-
- /* find chosen candidate and adjust GC data for all candidates
- * to ensure they stay in cache
- */
- for (rt = first; rt; rt = rt->u.dst.rt_next) {
- if ((rt->u.dst.flags & DST_BALANCED) != 0 &&
- multipath_comparekeys(&rt->fl, flp)) {
- rt->u.dst.lastuse = jiffies;
-
- if (i == candidate_no)
- decision = rt;
-
- if (i >= candidate_count)
- break;
-
- i++;
- }
- }
- }
-
- decision->u.dst.__use++;
- *rp = decision;
-}
-
-static struct ip_mp_alg_ops random_ops = {
- .mp_alg_select_route = random_select_route,
-};
-
-static int __init random_init(void)
-{
- return multipath_alg_register(&random_ops, IP_MP_ALG_RANDOM);
-}
-
-static void __exit random_exit(void)
-{
- multipath_alg_unregister(&random_ops, IP_MP_ALG_RANDOM);
-}
-
-module_init(random_init);
-module_exit(random_exit);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Round robin policy for multipath.
- *
- *
- * Version: $Id: multipath_rr.c,v 1.1.2.2 2004/09/16 07:42:34 elueck Exp $
- *
- * Authors: Einar Lueck <elueck@de.ibm.com><lkml@einar-lueck.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/fcntl.h>
-#include <linux/stat.h>
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/igmp.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-#include <linux/mroute.h>
-#include <linux/init.h>
-#include <net/ip.h>
-#include <net/protocol.h>
-#include <linux/skbuff.h>
-#include <net/sock.h>
-#include <net/icmp.h>
-#include <net/udp.h>
-#include <net/raw.h>
-#include <linux/notifier.h>
-#include <linux/if_arp.h>
-#include <linux/netfilter_ipv4.h>
-#include <net/ipip.h>
-#include <net/checksum.h>
-#include <net/ip_mp_alg.h>
-
-static void rr_select_route(const struct flowi *flp,
- struct rtable *first, struct rtable **rp)
-{
- struct rtable *nh, *result, *min_use_cand = NULL;
- int min_use = -1;
-
- /* 1. make sure all alt. nexthops have the same GC related data
- * 2. determine the new candidate to be returned
- */
- result = NULL;
- for (nh = rcu_dereference(first); nh;
- nh = rcu_dereference(nh->u.dst.rt_next)) {
- if ((nh->u.dst.flags & DST_BALANCED) != 0 &&
- multipath_comparekeys(&nh->fl, flp)) {
- nh->u.dst.lastuse = jiffies;
-
- if (min_use == -1 || nh->u.dst.__use < min_use) {
- min_use = nh->u.dst.__use;
- min_use_cand = nh;
- }
- }
- }
- result = min_use_cand;
- if (!result)
- result = first;
-
- result->u.dst.__use++;
- *rp = result;
-}
-
-static struct ip_mp_alg_ops rr_ops = {
- .mp_alg_select_route = rr_select_route,
-};
-
-static int __init rr_init(void)
-{
- return multipath_alg_register(&rr_ops, IP_MP_ALG_RR);
-}
-
-static void __exit rr_exit(void)
-{
- multipath_alg_unregister(&rr_ops, IP_MP_ALG_RR);
-}
-
-module_init(rr_init);
-module_exit(rr_exit);
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Weighted random policy for multipath.
- *
- *
- * Version: $Id: multipath_wrandom.c,v 1.1.2.3 2004/09/22 07:51:40 elueck Exp $
- *
- * Authors: Einar Lueck <elueck@de.ibm.com><lkml@einar-lueck.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/kernel.h>
-#include <linux/fcntl.h>
-#include <linux/stat.h>
-#include <linux/socket.h>
-#include <linux/in.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/inetdevice.h>
-#include <linux/igmp.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/module.h>
-#include <linux/mroute.h>
-#include <linux/init.h>
-#include <linux/random.h>
-#include <net/ip.h>
-#include <net/protocol.h>
-#include <linux/skbuff.h>
-#include <net/sock.h>
-#include <net/icmp.h>
-#include <net/udp.h>
-#include <net/raw.h>
-#include <linux/notifier.h>
-#include <linux/if_arp.h>
-#include <linux/netfilter_ipv4.h>
-#include <net/ipip.h>
-#include <net/checksum.h>
-#include <net/ip_fib.h>
-#include <net/ip_mp_alg.h>
-
-#define MULTIPATH_STATE_SIZE 15
-
-struct multipath_candidate {
- struct multipath_candidate *next;
- int power;
- struct rtable *rt;
-};
-
-struct multipath_dest {
- struct list_head list;
-
- const struct fib_nh *nh_info;
- __be32 netmask;
- __be32 network;
- unsigned char prefixlen;
-
- struct rcu_head rcu;
-};
-
-struct multipath_bucket {
- struct list_head head;
- spinlock_t lock;
-};
-
-struct multipath_route {
- struct list_head list;
-
- int oif;
- __be32 gw;
- struct list_head dests;
-
- struct rcu_head rcu;
-};
-
-/* state: primarily weight per route information */
-static struct multipath_bucket state[MULTIPATH_STATE_SIZE];
-
-static unsigned char __multipath_lookup_weight(const struct flowi *fl,
- const struct rtable *rt)
-{
- const int state_idx = rt->idev->dev->ifindex % MULTIPATH_STATE_SIZE;
- struct multipath_route *r;
- struct multipath_route *target_route = NULL;
- struct multipath_dest *d;
- int weight = 1;
-
- /* lookup the weight information for a certain route */
- rcu_read_lock();
-
- /* find state entry for gateway or add one if necessary */
- list_for_each_entry_rcu(r, &state[state_idx].head, list) {
- if (r->gw == rt->rt_gateway &&
- r->oif == rt->idev->dev->ifindex) {
- target_route = r;
- break;
- }
- }
-
- if (!target_route) {
- /* this should not happen... but we are prepared */
- printk( KERN_CRIT"%s: missing state for gateway: %u and " \
- "device %d\n", __FUNCTION__, rt->rt_gateway,
- rt->idev->dev->ifindex);
- goto out;
- }
-
- /* find state entry for destination */
- list_for_each_entry_rcu(d, &target_route->dests, list) {
- __be32 targetnetwork = fl->fl4_dst &
- inet_make_mask(d->prefixlen);
-
- if ((targetnetwork & d->netmask) == d->network) {
- weight = d->nh_info->nh_weight;
- goto out;
- }
- }
-
-out:
- rcu_read_unlock();
- return weight;
-}
-
-static void wrandom_init_state(void)
-{
- int i;
-
- for (i = 0; i < MULTIPATH_STATE_SIZE; ++i) {
- INIT_LIST_HEAD(&state[i].head);
- spin_lock_init(&state[i].lock);
- }
-}
-
-static void wrandom_select_route(const struct flowi *flp,
- struct rtable *first,
- struct rtable **rp)
-{
- struct rtable *rt;
- struct rtable *decision;
- struct multipath_candidate *first_mpc = NULL;
- struct multipath_candidate *mpc, *last_mpc = NULL;
- int power = 0;
- int last_power;
- int selector;
- const size_t size_mpc = sizeof(struct multipath_candidate);
-
- /* collect all candidates and identify their weights */
- for (rt = rcu_dereference(first); rt;
- rt = rcu_dereference(rt->u.dst.rt_next)) {
- if ((rt->u.dst.flags & DST_BALANCED) != 0 &&
- multipath_comparekeys(&rt->fl, flp)) {
- struct multipath_candidate* mpc =
- (struct multipath_candidate*)
- kmalloc(size_mpc, GFP_ATOMIC);
-
- if (!mpc)
- return;
-
- power += __multipath_lookup_weight(flp, rt) * 10000;
-
- mpc->power = power;
- mpc->rt = rt;
- mpc->next = NULL;
-
- if (!first_mpc)
- first_mpc = mpc;
- else
- last_mpc->next = mpc;
-
- last_mpc = mpc;
- }
- }
-
- /* choose a weighted random candidate */
- decision = first;
- selector = random32() % power;
- last_power = 0;
-
- /* select candidate, adjust GC data and cleanup local state */
- decision = first;
- last_mpc = NULL;
- for (mpc = first_mpc; mpc; mpc = mpc->next) {
- mpc->rt->u.dst.lastuse = jiffies;
- if (last_power <= selector && selector < mpc->power)
- decision = mpc->rt;
-
- last_power = mpc->power;
- kfree(last_mpc);
- last_mpc = mpc;
- }
-
- /* concurrent __multipath_flush may lead to !last_mpc */
- kfree(last_mpc);
-
- decision->u.dst.__use++;
- *rp = decision;
-}
-
-static void wrandom_set_nhinfo(__be32 network,
- __be32 netmask,
- unsigned char prefixlen,
- const struct fib_nh *nh)
-{
- const int state_idx = nh->nh_oif % MULTIPATH_STATE_SIZE;
- struct multipath_route *r, *target_route = NULL;
- struct multipath_dest *d, *target_dest = NULL;
-
- /* store the weight information for a certain route */
- spin_lock_bh(&state[state_idx].lock);
-
- /* find state entry for gateway or add one if necessary */
- list_for_each_entry_rcu(r, &state[state_idx].head, list) {
- if (r->gw == nh->nh_gw && r->oif == nh->nh_oif) {
- target_route = r;
- break;
- }
- }
-
- if (!target_route) {
- const size_t size_rt = sizeof(struct multipath_route);
- target_route = (struct multipath_route *)
- kmalloc(size_rt, GFP_ATOMIC);
-
- target_route->gw = nh->nh_gw;
- target_route->oif = nh->nh_oif;
- memset(&target_route->rcu, 0, sizeof(struct rcu_head));
- INIT_LIST_HEAD(&target_route->dests);
-
- list_add_rcu(&target_route->list, &state[state_idx].head);
- }
-
- /* find state entry for destination or add one if necessary */
- list_for_each_entry_rcu(d, &target_route->dests, list) {
- if (d->nh_info == nh) {
- target_dest = d;
- break;
- }
- }
-
- if (!target_dest) {
- const size_t size_dst = sizeof(struct multipath_dest);
- target_dest = (struct multipath_dest*)
- kmalloc(size_dst, GFP_ATOMIC);
-
- target_dest->nh_info = nh;
- target_dest->network = network;
- target_dest->netmask = netmask;
- target_dest->prefixlen = prefixlen;
- memset(&target_dest->rcu, 0, sizeof(struct rcu_head));
-
- list_add_rcu(&target_dest->list, &target_route->dests);
- }
- /* else: we already stored this info for another destination =>
- * we are finished
- */
-
- spin_unlock_bh(&state[state_idx].lock);
-}
-
-static void __multipath_free(struct rcu_head *head)
-{
- struct multipath_route *rt = container_of(head, struct multipath_route,
- rcu);
- kfree(rt);
-}
-
-static void __multipath_free_dst(struct rcu_head *head)
-{
- struct multipath_dest *dst = container_of(head,
- struct multipath_dest,
- rcu);
- kfree(dst);
-}
-
-static void wrandom_flush(void)
-{
- int i;
-
- /* defere delete to all entries */
- for (i = 0; i < MULTIPATH_STATE_SIZE; ++i) {
- struct multipath_route *r;
-
- spin_lock_bh(&state[i].lock);
- list_for_each_entry_rcu(r, &state[i].head, list) {
- struct multipath_dest *d;
- list_for_each_entry_rcu(d, &r->dests, list) {
- list_del_rcu(&d->list);
- call_rcu(&d->rcu,
- __multipath_free_dst);
- }
- list_del_rcu(&r->list);
- call_rcu(&r->rcu,
- __multipath_free);
- }
-
- spin_unlock_bh(&state[i].lock);
- }
-}
-
-static struct ip_mp_alg_ops wrandom_ops = {
- .mp_alg_select_route = wrandom_select_route,
- .mp_alg_flush = wrandom_flush,
- .mp_alg_set_nhinfo = wrandom_set_nhinfo,
-};
-
-static int __init wrandom_init(void)
-{
- wrandom_init_state();
-
- return multipath_alg_register(&wrandom_ops, IP_MP_ALG_WRANDOM);
-}
-
-static void __exit wrandom_exit(void)
-{
- multipath_alg_unregister(&wrandom_ops, IP_MP_ALG_WRANDOM);
-}
-
-module_init(wrandom_init);
-module_exit(wrandom_exit);
-MODULE_LICENSE("GPL");
To compile it as a module, choose M here. If unsure, say N.
config IP_NF_TARGET_SAME
- tristate "SAME target support"
+ tristate "SAME target support (OBSOLETE)"
depends on NF_NAT
help
This option adds a `SAME' target, which works like the standard SNAT
static const char nulldevname[IFNAMSIZ];
unsigned int verdict = NF_DROP;
struct arphdr *arp;
- int hotdrop = 0;
+ bool hotdrop = false;
struct arpt_entry *e, *back;
const char *indev, *outdev;
void *table_base;
}
/* The built-in targets: standard (NULL) and error. */
-static struct arpt_target arpt_standard_target = {
+static struct arpt_target arpt_standard_target __read_mostly = {
.name = ARPT_STANDARD_TARGET,
.targetsize = sizeof(int),
.family = NF_ARP,
};
-static struct arpt_target arpt_error_target = {
+static struct arpt_target arpt_error_target __read_mostly = {
.name = ARPT_ERROR_TARGET,
.target = arpt_error,
.targetsize = ARPT_FUNCTION_MAXNAMELEN,
return mangle->target;
}
-static int
+static bool
checkentry(const char *tablename, const void *e, const struct xt_target *target,
void *targinfo, unsigned int hook_mask)
{
if (mangle->flags & ~ARPT_MANGLE_MASK ||
!(mangle->flags & ARPT_MANGLE_MASK))
- return 0;
+ return false;
if (mangle->target != NF_DROP && mangle->target != NF_ACCEPT &&
mangle->target != ARPT_CONTINUE)
- return 0;
- return 1;
+ return false;
+ return true;
}
-static struct arpt_target arpt_mangle_reg = {
+static struct arpt_target arpt_mangle_reg __read_mostly = {
.name = "mangle",
.target = target,
.targetsize = sizeof(struct arpt_mangle),
return 1;
}
-static inline int
+static inline bool
ip_checkentry(const struct ipt_ip *ip)
{
if (ip->flags & ~IPT_F_MASK) {
duprintf("Unknown flag bits set: %08X\n",
ip->flags & ~IPT_F_MASK);
- return 0;
+ return false;
}
if (ip->invflags & ~IPT_INV_MASK) {
duprintf("Unknown invflag bits set: %08X\n",
ip->invflags & ~IPT_INV_MASK);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static unsigned int
}
static inline
-int do_match(struct ipt_entry_match *m,
- const struct sk_buff *skb,
- const struct net_device *in,
- const struct net_device *out,
- int offset,
- int *hotdrop)
+bool do_match(struct ipt_entry_match *m,
+ const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ int offset,
+ bool *hotdrop)
{
/* Stop iteration if it doesn't match */
if (!m->u.kernel.match->match(skb, in, out, m->u.kernel.match, m->data,
offset, ip_hdrlen(skb), hotdrop))
- return 1;
+ return true;
else
- return 0;
+ return false;
}
static inline struct ipt_entry *
return (struct ipt_entry *)(base + offset);
}
+/* All zeroes == unconditional rule. */
+static inline int
+unconditional(const struct ipt_ip *ip)
+{
+ unsigned int i;
+
+ for (i = 0; i < sizeof(*ip)/sizeof(__u32); i++)
+ if (((__u32 *)ip)[i])
+ return 0;
+
+ return 1;
+}
+
+#if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+ defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
+static const char *hooknames[] = {
+ [NF_IP_PRE_ROUTING] = "PREROUTING",
+ [NF_IP_LOCAL_IN] = "INPUT",
+ [NF_IP_FORWARD] = "FORWARD",
+ [NF_IP_LOCAL_OUT] = "OUTPUT",
+ [NF_IP_POST_ROUTING] = "POSTROUTING",
+};
+
+enum nf_ip_trace_comments {
+ NF_IP_TRACE_COMMENT_RULE,
+ NF_IP_TRACE_COMMENT_RETURN,
+ NF_IP_TRACE_COMMENT_POLICY,
+};
+
+static const char *comments[] = {
+ [NF_IP_TRACE_COMMENT_RULE] = "rule",
+ [NF_IP_TRACE_COMMENT_RETURN] = "return",
+ [NF_IP_TRACE_COMMENT_POLICY] = "policy",
+};
+
+static struct nf_loginfo trace_loginfo = {
+ .type = NF_LOG_TYPE_LOG,
+ .u = {
+ .log = {
+ .level = 4,
+ .logflags = NF_LOG_MASK,
+ },
+ },
+};
+
+static inline int
+get_chainname_rulenum(struct ipt_entry *s, struct ipt_entry *e,
+ char *hookname, char **chainname,
+ char **comment, unsigned int *rulenum)
+{
+ struct ipt_standard_target *t = (void *)ipt_get_target(s);
+
+ if (strcmp(t->target.u.kernel.target->name, IPT_ERROR_TARGET) == 0) {
+ /* Head of user chain: ERROR target with chainname */
+ *chainname = t->target.data;
+ (*rulenum) = 0;
+ } else if (s == e) {
+ (*rulenum)++;
+
+ if (s->target_offset == sizeof(struct ipt_entry)
+ && strcmp(t->target.u.kernel.target->name,
+ IPT_STANDARD_TARGET) == 0
+ && t->verdict < 0
+ && unconditional(&s->ip)) {
+ /* Tail of chains: STANDARD target (return/policy) */
+ *comment = *chainname == hookname
+ ? (char *)comments[NF_IP_TRACE_COMMENT_POLICY]
+ : (char *)comments[NF_IP_TRACE_COMMENT_RETURN];
+ }
+ return 1;
+ } else
+ (*rulenum)++;
+
+ return 0;
+}
+
+static void trace_packet(struct sk_buff *skb,
+ unsigned int hook,
+ const struct net_device *in,
+ const struct net_device *out,
+ char *tablename,
+ struct xt_table_info *private,
+ struct ipt_entry *e)
+{
+ void *table_base;
+ struct ipt_entry *root;
+ char *hookname, *chainname, *comment;
+ unsigned int rulenum = 0;
+
+ table_base = (void *)private->entries[smp_processor_id()];
+ root = get_entry(table_base, private->hook_entry[hook]);
+
+ hookname = chainname = (char *)hooknames[hook];
+ comment = (char *)comments[NF_IP_TRACE_COMMENT_RULE];
+
+ IPT_ENTRY_ITERATE(root,
+ private->size - private->hook_entry[hook],
+ get_chainname_rulenum,
+ e, hookname, &chainname, &comment, &rulenum);
+
+ nf_log_packet(AF_INET, hook, skb, in, out, &trace_loginfo,
+ "TRACE: %s:%s:%s:%u ",
+ tablename, chainname, comment, rulenum);
+}
+#endif
+
/* Returns one of the generic firewall policies, like NF_ACCEPT. */
unsigned int
ipt_do_table(struct sk_buff **pskb,
u_int16_t offset;
struct iphdr *ip;
u_int16_t datalen;
- int hotdrop = 0;
+ bool hotdrop = false;
/* Initializing verdict to NF_DROP keeps gcc happy. */
unsigned int verdict = NF_DROP;
const char *indev, *outdev;
t = ipt_get_target(e);
IP_NF_ASSERT(t->u.kernel.target);
+
+#if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+ defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
+ /* The packet is traced: log it */
+ if (unlikely((*pskb)->nf_trace))
+ trace_packet(*pskb, hook, in, out,
+ table->name, private, e);
+#endif
/* Standard target? */
if (!t->u.kernel.target->target) {
int v;
#endif
}
-/* All zeroes == unconditional rule. */
-static inline int
-unconditional(const struct ipt_ip *ip)
-{
- unsigned int i;
-
- for (i = 0; i < sizeof(*ip)/sizeof(__u32); i++)
- if (((__u32 *)ip)[i])
- return 0;
-
- return 1;
-}
-
/* Figures out from what hook each rule can be called: returns 0 if
there are loops. Puts hook bitmask in comefrom. */
static int
}
/* Returns 1 if the type and code is matched by the range, 0 otherwise */
-static inline int
+static inline bool
icmp_type_code_match(u_int8_t test_type, u_int8_t min_code, u_int8_t max_code,
u_int8_t type, u_int8_t code,
- int invert)
+ bool invert)
{
return ((test_type == 0xFF) || (type == test_type && code >= min_code && code <= max_code))
^ invert;
}
-static int
+static bool
icmp_match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
struct icmphdr _icmph, *ic;
const struct ipt_icmp *icmpinfo = matchinfo;
/* Must not be a fragment. */
if (offset)
- return 0;
+ return false;
ic = skb_header_pointer(skb, protoff, sizeof(_icmph), &_icmph);
if (ic == NULL) {
* can't. Hence, no choice but to drop.
*/
duprintf("Dropping evil ICMP tinygram.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
return icmp_type_code_match(icmpinfo->type,
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
icmp_checkentry(const char *tablename,
const void *info,
const struct xt_match *match,
}
/* The built-in targets: standard (NULL) and error. */
-static struct xt_target ipt_standard_target = {
+static struct xt_target ipt_standard_target __read_mostly = {
.name = IPT_STANDARD_TARGET,
.targetsize = sizeof(int),
.family = AF_INET,
#endif
};
-static struct xt_target ipt_error_target = {
+static struct xt_target ipt_error_target __read_mostly = {
.name = IPT_ERROR_TARGET,
.target = ipt_error,
.targetsize = IPT_FUNCTION_MAXNAMELEN,
#endif
};
-static struct xt_match icmp_matchstruct = {
+static struct xt_match icmp_matchstruct __read_mostly = {
.name = "icmp",
.match = icmp_match,
.matchsize = sizeof(struct ipt_icmp),
if (ret < 0)
goto err5;
- printk("ip_tables: (C) 2000-2006 Netfilter Core Team\n");
+ printk(KERN_INFO "ip_tables: (C) 2000-2006 Netfilter Core Team\n");
return 0;
err5:
#define CLUSTERIP_VERSION "0.8"
-#define DEBUG_CLUSTERIP
-
-#ifdef DEBUG_CLUSTERIP
-#define DEBUGP printk
-#else
-#define DEBUGP
-#endif
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Harald Welte <laforge@netfilter.org>");
MODULE_DESCRIPTION("iptables target for CLUSTERIP");
list_for_each(pos, &clusterip_configs) {
struct clusterip_config *c = list_entry(pos,
struct clusterip_config, list);
- if (c->clusterip == clusterip) {
+ if (c->clusterip == clusterip)
return c;
- }
}
return NULL;
{
int n;
- for (n = 0; n < i->num_local_nodes; n++) {
+ for (n = 0; n < i->num_local_nodes; n++)
set_bit(i->local_nodes[n] - 1, &c->local_nodes);
- }
}
static struct clusterip_config *
return 0;
}
-static int
+static bool
clusterip_del_node(struct clusterip_config *c, u_int16_t nodenum)
{
if (nodenum == 0 ||
nodenum > c->num_total_nodes)
- return 1;
+ return true;
if (test_and_clear_bit(nodenum - 1, &c->local_nodes))
- return 0;
+ return false;
- return 1;
+ return true;
}
#endif
static inline u_int32_t
-clusterip_hashfn(struct sk_buff *skb, struct clusterip_config *config)
+clusterip_hashfn(const struct sk_buff *skb,
+ const struct clusterip_config *config)
{
- struct iphdr *iph = ip_hdr(skb);
+ const struct iphdr *iph = ip_hdr(skb);
unsigned long hashval;
u_int16_t sport, dport;
- u_int16_t *ports;
+ const u_int16_t *ports;
switch (iph->protocol) {
case IPPROTO_TCP:
case IPPROTO_SCTP:
case IPPROTO_DCCP:
case IPPROTO_ICMP:
- ports = (void *)iph+iph->ihl*4;
+ ports = (const void *)iph+iph->ihl*4;
sport = ports[0];
dport = ports[1];
break;
default:
- if (net_ratelimit()) {
+ if (net_ratelimit())
printk(KERN_NOTICE "CLUSTERIP: unknown protocol `%u'\n",
iph->protocol);
- }
sport = dport = 0;
}
}
/* node numbers are 1..n, not 0..n */
- return ((hashval % config->num_total_nodes)+1);
+ return (hashval % config->num_total_nodes) + 1;
}
static inline int
-clusterip_responsible(struct clusterip_config *config, u_int32_t hash)
+clusterip_responsible(const struct clusterip_config *config, u_int32_t hash)
{
return test_bit(hash - 1, &config->local_nodes);
}
break;
}
-#ifdef DEBUG_CLUSTERP
+#ifdef DEBUG
DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
#endif
- DEBUGP("hash=%u ct_hash=%u ", hash, ct->mark);
+ pr_debug("hash=%u ct_hash=%u ", hash, ct->mark);
if (!clusterip_responsible(cipinfo->config, hash)) {
- DEBUGP("not responsible\n");
+ pr_debug("not responsible\n");
return NF_DROP;
}
- DEBUGP("responsible\n");
+ pr_debug("responsible\n");
/* despite being received via linklayer multicast, this is
* actually a unicast IP packet. TCP doesn't like PACKET_MULTICAST */
return XT_CONTINUE;
}
-static int
+static bool
checkentry(const char *tablename,
const void *e_void,
const struct xt_target *target,
cipinfo->hash_mode != CLUSTERIP_HASHMODE_SIP_SPT_DPT) {
printk(KERN_WARNING "CLUSTERIP: unknown mode `%u'\n",
cipinfo->hash_mode);
- return 0;
+ return false;
}
if (e->ip.dmsk.s_addr != htonl(0xffffffff)
|| e->ip.dst.s_addr == 0) {
printk(KERN_ERR "CLUSTERIP: Please specify destination IP\n");
- return 0;
+ return false;
}
/* FIXME: further sanity checks */
config = clusterip_config_find_get(e->ip.dst.s_addr, 1);
- if (config) {
- if (cipinfo->config != NULL) {
- /* Case A: This is an entry that gets reloaded, since
- * it still has a cipinfo->config pointer. Simply
- * increase the entry refcount and return */
- if (cipinfo->config != config) {
- printk(KERN_ERR "CLUSTERIP: Reloaded entry "
- "has invalid config pointer!\n");
- return 0;
- }
- } else {
- /* Case B: This is a new rule referring to an existing
- * clusterip config. */
- cipinfo->config = config;
- }
- } else {
- /* Case C: This is a completely new clusterip config */
+ if (!config) {
if (!(cipinfo->flags & CLUSTERIP_FLAG_NEW)) {
printk(KERN_WARNING "CLUSTERIP: no config found for %u.%u.%u.%u, need 'new'\n", NIPQUAD(e->ip.dst.s_addr));
- return 0;
+ return false;
} else {
struct net_device *dev;
if (e->ip.iniface[0] == '\0') {
printk(KERN_WARNING "CLUSTERIP: Please specify an interface name\n");
- return 0;
+ return false;
}
dev = dev_get_by_name(e->ip.iniface);
if (!dev) {
printk(KERN_WARNING "CLUSTERIP: no such interface %s\n", e->ip.iniface);
- return 0;
+ return false;
}
config = clusterip_config_init(cipinfo,
if (!config) {
printk(KERN_WARNING "CLUSTERIP: cannot allocate config\n");
dev_put(dev);
- return 0;
+ return false;
}
dev_mc_add(config->dev,config->clustermac, ETH_ALEN, 0);
}
- cipinfo->config = config;
}
+ cipinfo->config = config;
if (nf_ct_l3proto_try_module_get(target->family) < 0) {
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", target->family);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
/* drop reference count of cluster config when rule is deleted */
nf_ct_l3proto_module_put(target->family);
}
-static struct xt_target clusterip_tgt = {
+#ifdef CONFIG_COMPAT
+struct compat_ipt_clusterip_tgt_info
+{
+ u_int32_t flags;
+ u_int8_t clustermac[6];
+ u_int16_t num_total_nodes;
+ u_int16_t num_local_nodes;
+ u_int16_t local_nodes[CLUSTERIP_MAX_NODES];
+ u_int32_t hash_mode;
+ u_int32_t hash_initval;
+ compat_uptr_t config;
+};
+#endif /* CONFIG_COMPAT */
+
+static struct xt_target clusterip_tgt __read_mostly = {
.name = "CLUSTERIP",
.family = AF_INET,
.target = target,
- .targetsize = sizeof(struct ipt_clusterip_tgt_info),
.checkentry = checkentry,
.destroy = destroy,
+ .targetsize = sizeof(struct ipt_clusterip_tgt_info),
+#ifdef CONFIG_COMPAT
+ .compatsize = sizeof(struct compat_ipt_clusterip_tgt_info),
+#endif /* CONFIG_COMPAT */
.me = THIS_MODULE
};
__be32 dst_ip;
} __attribute__ ((packed));
-#ifdef CLUSTERIP_DEBUG
+#ifdef DEBUG
static void arp_print(struct arp_payload *payload)
{
#define HBUFFERLEN 30
* this wouldn't work, since we didn't subscribe the mcast group on
* other interfaces */
if (c->dev != out) {
- DEBUGP("CLUSTERIP: not mangling arp reply on different "
- "interface: cip'%s'-skb'%s'\n", c->dev->name, out->name);
+ pr_debug("CLUSTERIP: not mangling arp reply on different "
+ "interface: cip'%s'-skb'%s'\n",
+ c->dev->name, out->name);
clusterip_config_put(c);
return NF_ACCEPT;
}
/* mangle reply hardware address */
memcpy(payload->src_hw, c->clustermac, arp->ar_hln);
-#ifdef CLUSTERIP_DEBUG
- DEBUGP(KERN_DEBUG "CLUSTERIP mangled arp reply: ");
+#ifdef DEBUG
+ pr_debug(KERN_DEBUG "CLUSTERIP mangled arp reply: ");
arp_print(payload);
#endif
return 0;
}
-static struct seq_operations clusterip_seq_ops = {
+static const struct seq_operations clusterip_seq_ops = {
.start = clusterip_seq_start,
.next = clusterip_seq_next,
.stop = clusterip_seq_stop,
MODULE_DESCRIPTION("iptables ECN modification module");
/* set ECT codepoint from IP header.
- * return 0 if there was an error. */
-static inline int
+ * return false if there was an error. */
+static inline bool
set_ect_ip(struct sk_buff **pskb, const struct ipt_ECN_info *einfo)
{
struct iphdr *iph = ip_hdr(*pskb);
if ((iph->tos & IPT_ECN_IP_MASK) != (einfo->ip_ect & IPT_ECN_IP_MASK)) {
__u8 oldtos;
if (!skb_make_writable(pskb, sizeof(struct iphdr)))
- return 0;
+ return false;
iph = ip_hdr(*pskb);
oldtos = iph->tos;
iph->tos &= ~IPT_ECN_IP_MASK;
iph->tos |= (einfo->ip_ect & IPT_ECN_IP_MASK);
nf_csum_replace2(&iph->check, htons(oldtos), htons(iph->tos));
}
- return 1;
+ return true;
}
-/* Return 0 if there was an error. */
-static inline int
+/* Return false if there was an error. */
+static inline bool
set_ect_tcp(struct sk_buff **pskb, const struct ipt_ECN_info *einfo)
{
struct tcphdr _tcph, *tcph;
tcph = skb_header_pointer(*pskb, ip_hdrlen(*pskb),
sizeof(_tcph), &_tcph);
if (!tcph)
- return 0;
+ return false;
if ((!(einfo->operation & IPT_ECN_OP_SET_ECE) ||
tcph->ece == einfo->proto.tcp.ece) &&
- ((!(einfo->operation & IPT_ECN_OP_SET_CWR) ||
- tcph->cwr == einfo->proto.tcp.cwr)))
- return 1;
+ (!(einfo->operation & IPT_ECN_OP_SET_CWR) ||
+ tcph->cwr == einfo->proto.tcp.cwr))
+ return true;
if (!skb_make_writable(pskb, ip_hdrlen(*pskb) + sizeof(*tcph)))
- return 0;
+ return false;
tcph = (void *)ip_hdr(*pskb) + ip_hdrlen(*pskb);
oldval = ((__be16 *)tcph)[6];
nf_proto_csum_replace2(&tcph->check, *pskb,
oldval, ((__be16 *)tcph)[6], 0);
- return 1;
+ return true;
}
static unsigned int
return XT_CONTINUE;
}
-static int
+static bool
checkentry(const char *tablename,
const void *e_void,
const struct xt_target *target,
if (einfo->operation & IPT_ECN_OP_MASK) {
printk(KERN_WARNING "ECN: unsupported ECN operation %x\n",
einfo->operation);
- return 0;
+ return false;
}
if (einfo->ip_ect & ~IPT_ECN_IP_MASK) {
printk(KERN_WARNING "ECN: new ECT codepoint %x out of mask\n",
einfo->ip_ect);
- return 0;
+ return false;
}
if ((einfo->operation & (IPT_ECN_OP_SET_ECE|IPT_ECN_OP_SET_CWR))
&& (e->ip.proto != IPPROTO_TCP || (e->ip.invflags & XT_INV_PROTO))) {
printk(KERN_WARNING "ECN: cannot use TCP operations on a "
"non-tcp rule\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_target ipt_ecn_reg = {
+static struct xt_target ipt_ecn_reg __read_mostly = {
.name = "ECN",
.family = AF_INET,
.target = target,
MODULE_AUTHOR("Netfilter Core Team <coreteam@netfilter.org>");
MODULE_DESCRIPTION("iptables syslog logging module");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Use lock to serialize, so printks don't overlap */
static DEFINE_SPINLOCK(log_lock);
const struct sk_buff *skb,
unsigned int iphoff)
{
- struct iphdr _iph, *ih;
+ struct iphdr _iph;
+ const struct iphdr *ih;
unsigned int logflags;
if (info->type == NF_LOG_TYPE_LOG)
switch (ih->protocol) {
case IPPROTO_TCP: {
- struct tcphdr _tcph, *th;
+ struct tcphdr _tcph;
+ const struct tcphdr *th;
/* Max length: 10 "PROTO=TCP " */
printk("PROTO=TCP ");
if ((logflags & IPT_LOG_TCPOPT)
&& th->doff * 4 > sizeof(struct tcphdr)) {
unsigned char _opt[4 * 15 - sizeof(struct tcphdr)];
- unsigned char *op;
+ const unsigned char *op;
unsigned int i, optsize;
optsize = th->doff * 4 - sizeof(struct tcphdr);
}
case IPPROTO_UDP:
case IPPROTO_UDPLITE: {
- struct udphdr _udph, *uh;
+ struct udphdr _udph;
+ const struct udphdr *uh;
if (ih->protocol == IPPROTO_UDP)
/* Max length: 10 "PROTO=UDP " */
break;
}
case IPPROTO_ICMP: {
- struct icmphdr _icmph, *ich;
+ struct icmphdr _icmph;
+ const struct icmphdr *ich;
static const size_t required_len[NR_ICMP_TYPES+1]
= { [ICMP_ECHOREPLY] = 4,
[ICMP_DEST_UNREACH]
}
/* Max Length */
case IPPROTO_AH: {
- struct ip_auth_hdr _ahdr, *ah;
+ struct ip_auth_hdr _ahdr;
+ const struct ip_auth_hdr *ah;
if (ntohs(ih->frag_off) & IP_OFFSET)
break;
break;
}
case IPPROTO_ESP: {
- struct ip_esp_hdr _esph, *eh;
+ struct ip_esp_hdr _esph;
+ const struct ip_esp_hdr *eh;
/* Max length: 10 "PROTO=ESP " */
printk("PROTO=ESP ");
out ? out->name : "");
#ifdef CONFIG_BRIDGE_NETFILTER
if (skb->nf_bridge) {
- struct net_device *physindev = skb->nf_bridge->physindev;
- struct net_device *physoutdev = skb->nf_bridge->physoutdev;
+ const struct net_device *physindev;
+ const struct net_device *physoutdev;
+ physindev = skb->nf_bridge->physindev;
if (physindev && in != physindev)
printk("PHYSIN=%s ", physindev->name);
+ physoutdev = skb->nf_bridge->physoutdev;
if (physoutdev && out != physoutdev)
printk("PHYSOUT=%s ", physoutdev->name);
}
return XT_CONTINUE;
}
-static int ipt_log_checkentry(const char *tablename,
- const void *e,
- const struct xt_target *target,
- void *targinfo,
- unsigned int hook_mask)
+static bool ipt_log_checkentry(const char *tablename,
+ const void *e,
+ const struct xt_target *target,
+ void *targinfo,
+ unsigned int hook_mask)
{
const struct ipt_log_info *loginfo = targinfo;
if (loginfo->level >= 8) {
- DEBUGP("LOG: level %u >= 8\n", loginfo->level);
- return 0;
+ pr_debug("LOG: level %u >= 8\n", loginfo->level);
+ return false;
}
if (loginfo->prefix[sizeof(loginfo->prefix)-1] != '\0') {
- DEBUGP("LOG: prefix term %i\n",
- loginfo->prefix[sizeof(loginfo->prefix)-1]);
- return 0;
+ pr_debug("LOG: prefix term %i\n",
+ loginfo->prefix[sizeof(loginfo->prefix)-1]);
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_target ipt_log_reg = {
+static struct xt_target ipt_log_reg __read_mostly = {
.name = "LOG",
.family = AF_INET,
.target = ipt_log_target,
MODULE_AUTHOR("Netfilter Core Team <coreteam@netfilter.org>");
MODULE_DESCRIPTION("iptables MASQUERADE target module");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Lock protects masq region inside conntrack */
static DEFINE_RWLOCK(masq_lock);
/* FIXME: Multiple targets. --RR */
-static int
+static bool
masquerade_check(const char *tablename,
const void *e,
const struct xt_target *target,
const struct nf_nat_multi_range_compat *mr = targinfo;
if (mr->range[0].flags & IP_NAT_RANGE_MAP_IPS) {
- DEBUGP("masquerade_check: bad MAP_IPS.\n");
- return 0;
+ pr_debug("masquerade_check: bad MAP_IPS.\n");
+ return false;
}
if (mr->rangesize != 1) {
- DEBUGP("masquerade_check: bad rangesize %u.\n", mr->rangesize);
- return 0;
+ pr_debug("masquerade_check: bad rangesize %u\n", mr->rangesize);
+ return false;
}
- return 1;
+ return true;
}
static unsigned int
enum ip_conntrack_info ctinfo;
struct nf_nat_range newrange;
const struct nf_nat_multi_range_compat *mr;
- struct rtable *rt;
+ const struct rtable *rt;
__be32 newsrc;
NF_CT_ASSERT(hooknum == NF_IP_POST_ROUTING);
return nf_nat_setup_info(ct, &newrange, hooknum);
}
-static inline int
+static int
device_cmp(struct nf_conn *i, void *ifindex)
{
- struct nf_conn_nat *nat = nfct_nat(i);
+ const struct nf_conn_nat *nat = nfct_nat(i);
int ret;
if (!nat)
unsigned long event,
void *ptr)
{
- struct net_device *dev = ptr;
+ const struct net_device *dev = ptr;
if (event == NETDEV_DOWN) {
/* Device was downed. Search entire table for
unsigned long event,
void *ptr)
{
- struct net_device *dev = ((struct in_ifaddr *)ptr)->ifa_dev->dev;
+ const struct net_device *dev = ((struct in_ifaddr *)ptr)->ifa_dev->dev;
if (event == NETDEV_DOWN) {
/* IP address was deleted. Search entire table for
.notifier_call = masq_inet_event,
};
-static struct xt_target masquerade = {
+static struct xt_target masquerade __read_mostly = {
.name = "MASQUERADE",
.family = AF_INET,
.target = masquerade_target,
#include <linux/netfilter/x_tables.h>
#include <net/netfilter/nf_nat_rule.h>
-#define MODULENAME "NETMAP"
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Svenning Soerensen <svenning@post5.tele.dk>");
MODULE_DESCRIPTION("iptables 1:1 NAT mapping of IP networks target");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
-static int
+static bool
check(const char *tablename,
const void *e,
const struct xt_target *target,
const struct nf_nat_multi_range_compat *mr = targinfo;
if (!(mr->range[0].flags & IP_NAT_RANGE_MAP_IPS)) {
- DEBUGP(MODULENAME":check: bad MAP_IPS.\n");
- return 0;
+ pr_debug("NETMAP:check: bad MAP_IPS.\n");
+ return false;
}
if (mr->rangesize != 1) {
- DEBUGP(MODULENAME":check: bad rangesize %u.\n", mr->rangesize);
- return 0;
+ pr_debug("NETMAP:check: bad rangesize %u.\n", mr->rangesize);
+ return false;
}
- return 1;
+ return true;
}
static unsigned int
return nf_nat_setup_info(ct, &newrange, hooknum);
}
-static struct xt_target target_module = {
- .name = MODULENAME,
+static struct xt_target target_module __read_mostly = {
+ .name = "NETMAP",
.family = AF_INET,
.target = target,
.targetsize = sizeof(struct nf_nat_multi_range_compat),
MODULE_AUTHOR("Netfilter Core Team <coreteam@netfilter.org>");
MODULE_DESCRIPTION("iptables REDIRECT target module");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* FIXME: Take multiple ranges --RR */
-static int
+static bool
redirect_check(const char *tablename,
const void *e,
const struct xt_target *target,
const struct nf_nat_multi_range_compat *mr = targinfo;
if (mr->range[0].flags & IP_NAT_RANGE_MAP_IPS) {
- DEBUGP("redirect_check: bad MAP_IPS.\n");
- return 0;
+ pr_debug("redirect_check: bad MAP_IPS.\n");
+ return false;
}
if (mr->rangesize != 1) {
- DEBUGP("redirect_check: bad rangesize %u.\n", mr->rangesize);
- return 0;
+ pr_debug("redirect_check: bad rangesize %u.\n", mr->rangesize);
+ return false;
}
- return 1;
+ return true;
}
static unsigned int
return nf_nat_setup_info(ct, &newrange, hooknum);
}
-static struct xt_target redirect_reg = {
+static struct xt_target redirect_reg __read_mostly = {
.name = "REDIRECT",
.family = AF_INET,
.target = redirect_target,
MODULE_AUTHOR("Netfilter Core Team <coreteam@netfilter.org>");
MODULE_DESCRIPTION("iptables REJECT target module");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Send RST reply */
static void send_reset(struct sk_buff *oldskb, int hook)
{
tcph->check = 0;
tcph->check = tcp_v4_check(sizeof(struct tcphdr),
niph->saddr, niph->daddr,
- csum_partial((char *)tcph,
+ csum_partial(tcph,
sizeof(struct tcphdr), 0));
/* Set DF, id = 0 */
return NF_DROP;
}
-static int check(const char *tablename,
- const void *e_void,
- const struct xt_target *target,
- void *targinfo,
- unsigned int hook_mask)
+static bool check(const char *tablename,
+ const void *e_void,
+ const struct xt_target *target,
+ void *targinfo,
+ unsigned int hook_mask)
{
const struct ipt_reject_info *rejinfo = targinfo;
const struct ipt_entry *e = e_void;
if (rejinfo->with == IPT_ICMP_ECHOREPLY) {
- printk("REJECT: ECHOREPLY no longer supported.\n");
- return 0;
+ printk("ipt_REJECT: ECHOREPLY no longer supported.\n");
+ return false;
} else if (rejinfo->with == IPT_TCP_RESET) {
/* Must specify that it's a TCP packet */
if (e->ip.proto != IPPROTO_TCP
|| (e->ip.invflags & XT_INV_PROTO)) {
- DEBUGP("REJECT: TCP_RESET invalid for non-tcp\n");
- return 0;
+ printk("ipt_REJECT: TCP_RESET invalid for non-tcp\n");
+ return false;
}
}
- return 1;
+ return true;
}
-static struct xt_target ipt_reject_reg = {
+static struct xt_target ipt_reject_reg __read_mostly = {
.name = "REJECT",
.family = AF_INET,
.target = reject,
MODULE_AUTHOR("Martin Josefsson <gandalf@wlug.westbo.se>");
MODULE_DESCRIPTION("iptables special SNAT module for consistent sourceip");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
-static int
+static bool
same_check(const char *tablename,
const void *e,
const struct xt_target *target,
mr->ipnum = 0;
if (mr->rangesize < 1) {
- DEBUGP("same_check: need at least one dest range.\n");
- return 0;
+ pr_debug("same_check: need at least one dest range.\n");
+ return false;
}
if (mr->rangesize > IPT_SAME_MAX_RANGE) {
- DEBUGP("same_check: too many ranges specified, maximum "
- "is %u ranges\n",
- IPT_SAME_MAX_RANGE);
- return 0;
+ pr_debug("same_check: too many ranges specified, maximum "
+ "is %u ranges\n", IPT_SAME_MAX_RANGE);
+ return false;
}
for (count = 0; count < mr->rangesize; count++) {
if (ntohl(mr->range[count].min_ip) >
ntohl(mr->range[count].max_ip)) {
- DEBUGP("same_check: min_ip is larger than max_ip in "
- "range `%u.%u.%u.%u-%u.%u.%u.%u'.\n",
- NIPQUAD(mr->range[count].min_ip),
- NIPQUAD(mr->range[count].max_ip));
- return 0;
+ pr_debug("same_check: min_ip is larger than max_ip in "
+ "range `%u.%u.%u.%u-%u.%u.%u.%u'.\n",
+ NIPQUAD(mr->range[count].min_ip),
+ NIPQUAD(mr->range[count].max_ip));
+ return false;
}
if (!(mr->range[count].flags & IP_NAT_RANGE_MAP_IPS)) {
- DEBUGP("same_check: bad MAP_IPS.\n");
- return 0;
+ pr_debug("same_check: bad MAP_IPS.\n");
+ return false;
}
rangeip = (ntohl(mr->range[count].max_ip) -
ntohl(mr->range[count].min_ip) + 1);
mr->ipnum += rangeip;
- DEBUGP("same_check: range %u, ipnum = %u\n", count, rangeip);
+ pr_debug("same_check: range %u, ipnum = %u\n", count, rangeip);
}
- DEBUGP("same_check: total ipaddresses = %u\n", mr->ipnum);
+ pr_debug("same_check: total ipaddresses = %u\n", mr->ipnum);
mr->iparray = kmalloc((sizeof(u_int32_t) * mr->ipnum), GFP_KERNEL);
if (!mr->iparray) {
- DEBUGP("same_check: Couldn't allocate %u bytes "
- "for %u ipaddresses!\n",
- (sizeof(u_int32_t) * mr->ipnum), mr->ipnum);
- return 0;
+ pr_debug("same_check: Couldn't allocate %Zu bytes "
+ "for %u ipaddresses!\n",
+ (sizeof(u_int32_t) * mr->ipnum), mr->ipnum);
+ return false;
}
- DEBUGP("same_check: Allocated %u bytes for %u ipaddresses.\n",
- (sizeof(u_int32_t) * mr->ipnum), mr->ipnum);
+ pr_debug("same_check: Allocated %Zu bytes for %u ipaddresses.\n",
+ (sizeof(u_int32_t) * mr->ipnum), mr->ipnum);
for (count = 0; count < mr->rangesize; count++) {
for (countess = ntohl(mr->range[count].min_ip);
countess <= ntohl(mr->range[count].max_ip);
countess++) {
mr->iparray[index] = countess;
- DEBUGP("same_check: Added ipaddress `%u.%u.%u.%u' "
- "in index %u.\n",
- HIPQUAD(countess), index);
+ pr_debug("same_check: Added ipaddress `%u.%u.%u.%u' "
+ "in index %u.\n", HIPQUAD(countess), index);
index++;
}
}
- return 1;
+ return true;
}
static void
kfree(mr->iparray);
- DEBUGP("same_destroy: Deallocated %u bytes for %u ipaddresses.\n",
- (sizeof(u_int32_t) * mr->ipnum), mr->ipnum);
+ pr_debug("same_destroy: Deallocated %Zu bytes for %u ipaddresses.\n",
+ (sizeof(u_int32_t) * mr->ipnum), mr->ipnum);
}
static unsigned int
new_ip = htonl(same->iparray[aindex]);
- DEBUGP("ipt_SAME: src=%u.%u.%u.%u dst=%u.%u.%u.%u, "
- "new src=%u.%u.%u.%u\n",
- NIPQUAD(t->src.ip), NIPQUAD(t->dst.ip),
- NIPQUAD(new_ip));
+ pr_debug("ipt_SAME: src=%u.%u.%u.%u dst=%u.%u.%u.%u, "
+ "new src=%u.%u.%u.%u\n",
+ NIPQUAD(t->src.u3.ip), NIPQUAD(t->dst.u3.ip), NIPQUAD(new_ip));
/* Transfer from original range. */
newrange = ((struct nf_nat_range)
return nf_nat_setup_info(ct, &newrange, hooknum);
}
-static struct xt_target same_reg = {
+static struct xt_target same_reg __read_mostly = {
.name = "SAME",
.family = AF_INET,
.target = same_target,
return XT_CONTINUE;
}
-static int
+static bool
checkentry(const char *tablename,
const void *e_void,
const struct xt_target *target,
&& tos != IPTOS_MINCOST
&& tos != IPTOS_NORMALSVC) {
printk(KERN_WARNING "TOS: bad tos value %#x\n", tos);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_target ipt_tos_reg = {
+static struct xt_target ipt_tos_reg __read_mostly = {
.name = "TOS",
.family = AF_INET,
.target = target,
return XT_CONTINUE;
}
-static int ipt_ttl_checkentry(const char *tablename,
+static bool ipt_ttl_checkentry(const char *tablename,
const void *e,
const struct xt_target *target,
void *targinfo,
unsigned int hook_mask)
{
- struct ipt_TTL_info *info = targinfo;
+ const struct ipt_TTL_info *info = targinfo;
if (info->mode > IPT_TTL_MAXMODE) {
printk(KERN_WARNING "ipt_TTL: invalid or unknown Mode %u\n",
info->mode);
- return 0;
+ return false;
}
- if ((info->mode != IPT_TTL_SET) && (info->ttl == 0))
- return 0;
- return 1;
+ if (info->mode != IPT_TTL_SET && info->ttl == 0)
+ return false;
+ return true;
}
-static struct xt_target ipt_TTL = {
+static struct xt_target ipt_TTL __read_mostly = {
.name = "TTL",
.family = AF_INET,
.target = ipt_ttl_target,
#define ULOG_NL_EVENT 111 /* Harald's favorite number */
#define ULOG_MAXNLGROUPS 32 /* numer of nlgroups */
-#if 0
-#define DEBUGP(format, args...) printk("%s:%s:" format, \
- __FILE__, __FUNCTION__ , ## args)
-#else
-#define DEBUGP(format, args...)
-#endif
-
#define PRINTR(format, args...) do { if (net_ratelimit()) printk(format , ## args); } while (0)
static unsigned int nlbufsiz = NLMSG_GOODSIZE;
ulog_buff_t *ub = &ulog_buffers[nlgroupnum];
if (timer_pending(&ub->timer)) {
- DEBUGP("ipt_ULOG: ulog_send: timer was pending, deleting\n");
+ pr_debug("ipt_ULOG: ulog_send: timer was pending, deleting\n");
del_timer(&ub->timer);
}
if (!ub->skb) {
- DEBUGP("ipt_ULOG: ulog_send: nothing to send\n");
+ pr_debug("ipt_ULOG: ulog_send: nothing to send\n");
return;
}
ub->lastnlh->nlmsg_type = NLMSG_DONE;
NETLINK_CB(ub->skb).dst_group = nlgroupnum + 1;
- DEBUGP("ipt_ULOG: throwing %d packets to netlink group %u\n",
- ub->qlen, nlgroupnum + 1);
+ pr_debug("ipt_ULOG: throwing %d packets to netlink group %u\n",
+ ub->qlen, nlgroupnum + 1);
netlink_broadcast(nflognl, ub->skb, 0, nlgroupnum + 1, GFP_ATOMIC);
ub->qlen = 0;
/* timer function to flush queue in flushtimeout time */
static void ulog_timer(unsigned long data)
{
- DEBUGP("ipt_ULOG: timer function called, calling ulog_send\n");
+ pr_debug("ipt_ULOG: timer function called, calling ulog_send\n");
/* lock to protect against somebody modifying our structure
* from ipt_ulog_target at the same time */
unsigned int groupnum = ffs(loginfo->nl_group) - 1;
/* calculate the size of the skb needed */
- if ((loginfo->copy_range == 0) ||
- (loginfo->copy_range > skb->len)) {
+ if (loginfo->copy_range == 0 || loginfo->copy_range > skb->len)
copy_len = skb->len;
- } else {
+ else
copy_len = loginfo->copy_range;
- }
size = NLMSG_SPACE(sizeof(*pm) + copy_len);
goto alloc_failure;
}
- DEBUGP("ipt_ULOG: qlen %d, qthreshold %d\n", ub->qlen,
- loginfo->qthreshold);
+ pr_debug("ipt_ULOG: qlen %d, qthreshold %Zu\n", ub->qlen,
+ loginfo->qthreshold);
/* NLMSG_PUT contains a hidden goto nlmsg_failure !!! */
nlh = NLMSG_PUT(ub->skb, 0, ub->qlen, ULOG_NL_EVENT,
BUG();
/* check if we are building multi-part messages */
- if (ub->qlen > 1) {
+ if (ub->qlen > 1)
ub->lastnlh->nlmsg_flags |= NLM_F_MULTI;
- }
ub->lastnlh = nlh;
ipt_ulog_packet(hooknum, skb, in, out, &loginfo, prefix);
}
-static int ipt_ulog_checkentry(const char *tablename,
- const void *e,
- const struct xt_target *target,
- void *targinfo,
- unsigned int hookmask)
+static bool ipt_ulog_checkentry(const char *tablename,
+ const void *e,
+ const struct xt_target *target,
+ void *targinfo,
+ unsigned int hookmask)
{
- struct ipt_ulog_info *loginfo = (struct ipt_ulog_info *) targinfo;
+ const struct ipt_ulog_info *loginfo = targinfo;
if (loginfo->prefix[sizeof(loginfo->prefix) - 1] != '\0') {
- DEBUGP("ipt_ULOG: prefix term %i\n",
- loginfo->prefix[sizeof(loginfo->prefix) - 1]);
- return 0;
+ pr_debug("ipt_ULOG: prefix term %i\n",
+ loginfo->prefix[sizeof(loginfo->prefix) - 1]);
+ return false;
}
if (loginfo->qthreshold > ULOG_MAX_QLEN) {
- DEBUGP("ipt_ULOG: queue threshold %i > MAX_QLEN\n",
- loginfo->qthreshold);
- return 0;
+ pr_debug("ipt_ULOG: queue threshold %Zu > MAX_QLEN\n",
+ loginfo->qthreshold);
+ return false;
}
- return 1;
+ return true;
}
#ifdef CONFIG_COMPAT
static void compat_from_user(void *dst, void *src)
{
- struct compat_ipt_ulog_info *cl = src;
+ const struct compat_ipt_ulog_info *cl = src;
struct ipt_ulog_info l = {
.nl_group = cl->nl_group,
.copy_range = cl->copy_range,
static int compat_to_user(void __user *dst, void *src)
{
- struct ipt_ulog_info *l = src;
+ const struct ipt_ulog_info *l = src;
struct compat_ipt_ulog_info cl = {
.nl_group = l->nl_group,
.copy_range = l->copy_range,
}
#endif /* CONFIG_COMPAT */
-static struct xt_target ipt_ulog_reg = {
+static struct xt_target ipt_ulog_reg __read_mostly = {
.name = "ULOG",
.family = AF_INET,
.target = ipt_ulog_target,
{
int ret, i;
- DEBUGP("ipt_ULOG: init module\n");
+ pr_debug("ipt_ULOG: init module\n");
if (nlbufsiz > 128*1024) {
printk("Netlink buffer has to be <= 128kB\n");
ulog_buff_t *ub;
int i;
- DEBUGP("ipt_ULOG: cleanup_module\n");
+ pr_debug("ipt_ULOG: cleanup_module\n");
if (nflog)
nf_log_unregister(&ipt_ulog_logger);
for (i = 0; i < ULOG_MAXNLGROUPS; i++) {
ub = &ulog_buffers[i];
if (timer_pending(&ub->timer)) {
- DEBUGP("timer was pending, deleting\n");
+ pr_debug("timer was pending, deleting\n");
del_timer(&ub->timer);
}
MODULE_AUTHOR("Patrick McHardy <kaber@trash.net>");
MODULE_DESCRIPTION("iptables addrtype match");
-static inline int match_type(__be32 addr, u_int16_t mask)
+static inline bool match_type(__be32 addr, u_int16_t mask)
{
return !!(mask & (1 << inet_addr_type(addr)));
}
-static int match(const struct sk_buff *skb,
- const struct net_device *in, const struct net_device *out,
- const struct xt_match *match, const void *matchinfo,
- int offset, unsigned int protoff, int *hotdrop)
+static bool match(const struct sk_buff *skb,
+ const struct net_device *in, const struct net_device *out,
+ const struct xt_match *match, const void *matchinfo,
+ int offset, unsigned int protoff, bool *hotdrop)
{
const struct ipt_addrtype_info *info = matchinfo;
const struct iphdr *iph = ip_hdr(skb);
- int ret = 1;
+ bool ret = true;
if (info->source)
ret &= match_type(iph->saddr, info->source)^info->invert_source;
return ret;
}
-static struct xt_match addrtype_match = {
+static struct xt_match addrtype_match __read_mostly = {
.name = "addrtype",
.family = AF_INET,
.match = match,
#endif
/* Returns 1 if the spi is matched by the range, 0 otherwise */
-static inline int
-spi_match(u_int32_t min, u_int32_t max, u_int32_t spi, int invert)
+static inline bool
+spi_match(u_int32_t min, u_int32_t max, u_int32_t spi, bool invert)
{
- int r=0;
+ bool r;
duprintf("ah spi_match:%c 0x%x <= 0x%x <= 0x%x",invert? '!':' ',
min,spi,max);
r=(spi >= min && spi <= max) ^ invert;
return r;
}
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
- struct ip_auth_hdr _ahdr, *ah;
+ struct ip_auth_hdr _ahdr;
+ const struct ip_auth_hdr *ah;
const struct ipt_ah *ahinfo = matchinfo;
/* Must not be a fragment. */
if (offset)
- return 0;
+ return false;
ah = skb_header_pointer(skb, protoff,
sizeof(_ahdr), &_ahdr);
* can't. Hence, no choice but to drop.
*/
duprintf("Dropping evil AH tinygram.\n");
- *hotdrop = 1;
+ *hotdrop = true;
return 0;
}
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
checkentry(const char *tablename,
const void *ip_void,
const struct xt_match *match,
/* Must specify no unknown invflags */
if (ahinfo->invflags & ~IPT_AH_INV_MASK) {
duprintf("ipt_ah: unknown flags %X\n", ahinfo->invflags);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match ah_match = {
+static struct xt_match ah_match __read_mostly = {
.name = "ah",
.family = AF_INET,
.match = match,
MODULE_DESCRIPTION("iptables ECN matching module");
MODULE_LICENSE("GPL");
-static inline int match_ip(const struct sk_buff *skb,
- const struct ipt_ecn_info *einfo)
+static inline bool match_ip(const struct sk_buff *skb,
+ const struct ipt_ecn_info *einfo)
{
return (ip_hdr(skb)->tos & IPT_ECN_IP_MASK) == einfo->ip_ect;
}
-static inline int match_tcp(const struct sk_buff *skb,
- const struct ipt_ecn_info *einfo,
- int *hotdrop)
+static inline bool match_tcp(const struct sk_buff *skb,
+ const struct ipt_ecn_info *einfo,
+ bool *hotdrop)
{
- struct tcphdr _tcph, *th;
+ struct tcphdr _tcph;
+ const struct tcphdr *th;
/* In practice, TCP match does this, so can't fail. But let's
* be good citizens.
*/
th = skb_header_pointer(skb, ip_hdrlen(skb), sizeof(_tcph), &_tcph);
if (th == NULL) {
- *hotdrop = 0;
- return 0;
+ *hotdrop = false;
+ return false;
}
if (einfo->operation & IPT_ECN_OP_MATCH_ECE) {
if (einfo->invert & IPT_ECN_OP_MATCH_ECE) {
if (th->ece == 1)
- return 0;
+ return false;
} else {
if (th->ece == 0)
- return 0;
+ return false;
}
}
if (einfo->operation & IPT_ECN_OP_MATCH_CWR) {
if (einfo->invert & IPT_ECN_OP_MATCH_CWR) {
if (th->cwr == 1)
- return 0;
+ return false;
} else {
if (th->cwr == 0)
- return 0;
+ return false;
}
}
- return 1;
+ return true;
}
-static int match(const struct sk_buff *skb,
- const struct net_device *in, const struct net_device *out,
- const struct xt_match *match, const void *matchinfo,
- int offset, unsigned int protoff, int *hotdrop)
+static bool match(const struct sk_buff *skb,
+ const struct net_device *in, const struct net_device *out,
+ const struct xt_match *match, const void *matchinfo,
+ int offset, unsigned int protoff, bool *hotdrop)
{
const struct ipt_ecn_info *info = matchinfo;
if (info->operation & IPT_ECN_OP_MATCH_IP)
if (!match_ip(skb, info))
- return 0;
+ return false;
if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR)) {
if (ip_hdr(skb)->protocol != IPPROTO_TCP)
- return 0;
+ return false;
if (!match_tcp(skb, info, hotdrop))
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static int checkentry(const char *tablename, const void *ip_void,
- const struct xt_match *match,
- void *matchinfo, unsigned int hook_mask)
+static bool checkentry(const char *tablename, const void *ip_void,
+ const struct xt_match *match,
+ void *matchinfo, unsigned int hook_mask)
{
const struct ipt_ecn_info *info = matchinfo;
const struct ipt_ip *ip = ip_void;
if (info->operation & IPT_ECN_OP_MATCH_MASK)
- return 0;
+ return false;
if (info->invert & IPT_ECN_OP_MATCH_MASK)
- return 0;
+ return false;
if (info->operation & (IPT_ECN_OP_MATCH_ECE|IPT_ECN_OP_MATCH_CWR)
&& ip->proto != IPPROTO_TCP) {
printk(KERN_WARNING "ipt_ecn: can't match TCP bits in rule for"
" non-tcp packets\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match ecn_match = {
+static struct xt_match ecn_match __read_mostly = {
.name = "ecn",
.family = AF_INET,
.match = match,
MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>");
MODULE_DESCRIPTION("iptables arbitrary IP range match module");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const struct xt_match *match,
const void *matchinfo,
- int offset, unsigned int protoff, int *hotdrop)
+ int offset, unsigned int protoff, bool *hotdrop)
{
const struct ipt_iprange_info *info = matchinfo;
const struct iphdr *iph = ip_hdr(skb);
if (info->flags & IPRANGE_SRC) {
- if (((ntohl(iph->saddr) < ntohl(info->src.min_ip))
- || (ntohl(iph->saddr) > ntohl(info->src.max_ip)))
+ if ((ntohl(iph->saddr) < ntohl(info->src.min_ip)
+ || ntohl(iph->saddr) > ntohl(info->src.max_ip))
^ !!(info->flags & IPRANGE_SRC_INV)) {
- DEBUGP("src IP %u.%u.%u.%u NOT in range %s"
- "%u.%u.%u.%u-%u.%u.%u.%u\n",
- NIPQUAD(iph->saddr),
- info->flags & IPRANGE_SRC_INV ? "(INV) " : "",
- NIPQUAD(info->src.min_ip),
- NIPQUAD(info->src.max_ip));
- return 0;
+ pr_debug("src IP %u.%u.%u.%u NOT in range %s"
+ "%u.%u.%u.%u-%u.%u.%u.%u\n",
+ NIPQUAD(iph->saddr),
+ info->flags & IPRANGE_SRC_INV ? "(INV) " : "",
+ NIPQUAD(info->src.min_ip),
+ NIPQUAD(info->src.max_ip));
+ return false;
}
}
if (info->flags & IPRANGE_DST) {
- if (((ntohl(iph->daddr) < ntohl(info->dst.min_ip))
- || (ntohl(iph->daddr) > ntohl(info->dst.max_ip)))
+ if ((ntohl(iph->daddr) < ntohl(info->dst.min_ip)
+ || ntohl(iph->daddr) > ntohl(info->dst.max_ip))
^ !!(info->flags & IPRANGE_DST_INV)) {
- DEBUGP("dst IP %u.%u.%u.%u NOT in range %s"
- "%u.%u.%u.%u-%u.%u.%u.%u\n",
- NIPQUAD(iph->daddr),
- info->flags & IPRANGE_DST_INV ? "(INV) " : "",
- NIPQUAD(info->dst.min_ip),
- NIPQUAD(info->dst.max_ip));
- return 0;
+ pr_debug("dst IP %u.%u.%u.%u NOT in range %s"
+ "%u.%u.%u.%u-%u.%u.%u.%u\n",
+ NIPQUAD(iph->daddr),
+ info->flags & IPRANGE_DST_INV ? "(INV) " : "",
+ NIPQUAD(info->dst.min_ip),
+ NIPQUAD(info->dst.max_ip));
+ return false;
}
}
- return 1;
+ return true;
}
-static struct xt_match iprange_match = {
+static struct xt_match iprange_match __read_mostly = {
.name = "iprange",
.family = AF_INET,
.match = match,
MODULE_AUTHOR("Marc Boucher <marc@mbsi.ca>");
MODULE_DESCRIPTION("iptables owner match");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct ipt_owner_info *info = matchinfo;
if (!skb->sk || !skb->sk->sk_socket || !skb->sk->sk_socket->file)
- return 0;
+ return false;
if(info->match & IPT_OWNER_UID) {
if ((skb->sk->sk_socket->file->f_uid != info->uid) ^
!!(info->invert & IPT_OWNER_UID))
- return 0;
+ return false;
}
if(info->match & IPT_OWNER_GID) {
if ((skb->sk->sk_socket->file->f_gid != info->gid) ^
!!(info->invert & IPT_OWNER_GID))
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static int
+static bool
checkentry(const char *tablename,
const void *ip,
const struct xt_match *match,
if (info->match & (IPT_OWNER_PID|IPT_OWNER_SID|IPT_OWNER_COMM)) {
printk("ipt_owner: pid, sid and command matching "
"not supported anymore\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match owner_match = {
+static struct xt_match owner_match __read_mostly = {
.name = "owner",
.family = AF_INET,
.match = match,
struct recent_entry *e, *next;
unsigned int i;
- for (i = 0; i < ip_list_hash_size; i++) {
+ for (i = 0; i < ip_list_hash_size; i++)
list_for_each_entry_safe(e, next, &t->iphash[i], list)
recent_entry_remove(t, e);
- }
}
-static int
+static bool
ipt_recent_match(const struct sk_buff *skb,
const struct net_device *in, const struct net_device *out,
const struct xt_match *match, const void *matchinfo,
- int offset, unsigned int protoff, int *hotdrop)
+ int offset, unsigned int protoff, bool *hotdrop)
{
const struct ipt_recent_info *info = matchinfo;
struct recent_table *t;
struct recent_entry *e;
__be32 addr;
u_int8_t ttl;
- int ret = info->invert;
+ bool ret = info->invert;
if (info->side == IPT_RECENT_DEST)
addr = ip_hdr(skb)->daddr;
goto out;
e = recent_entry_init(t, addr, ttl);
if (e == NULL)
- *hotdrop = 1;
- ret ^= 1;
+ *hotdrop = true;
+ ret = !ret;
goto out;
}
if (info->check_set & IPT_RECENT_SET)
- ret ^= 1;
+ ret = !ret;
else if (info->check_set & IPT_RECENT_REMOVE) {
recent_entry_remove(t, e);
- ret ^= 1;
+ ret = !ret;
} else if (info->check_set & (IPT_RECENT_CHECK | IPT_RECENT_UPDATE)) {
unsigned long t = jiffies - info->seconds * HZ;
unsigned int i, hits = 0;
if (info->seconds && time_after(t, e->stamps[i]))
continue;
if (++hits >= info->hit_count) {
- ret ^= 1;
+ ret = !ret;
break;
}
}
return ret;
}
-static int
+static bool
ipt_recent_checkentry(const char *tablename, const void *ip,
const struct xt_match *match, void *matchinfo,
unsigned int hook_mask)
const struct ipt_recent_info *info = matchinfo;
struct recent_table *t;
unsigned i;
- int ret = 0;
+ bool ret = false;
if (hweight8(info->check_set &
(IPT_RECENT_SET | IPT_RECENT_REMOVE |
IPT_RECENT_CHECK | IPT_RECENT_UPDATE)) != 1)
- return 0;
+ return false;
if ((info->check_set & (IPT_RECENT_SET | IPT_RECENT_REMOVE)) &&
(info->seconds || info->hit_count))
- return 0;
+ return false;
if (info->name[0] == '\0' ||
strnlen(info->name, IPT_RECENT_NAME_LEN) == IPT_RECENT_NAME_LEN)
- return 0;
+ return false;
mutex_lock(&recent_mutex);
t = recent_table_lookup(info->name);
if (t != NULL) {
t->refcnt++;
- ret = 1;
+ ret = true;
goto out;
}
spin_lock_bh(&recent_lock);
list_add_tail(&t->list, &tables);
spin_unlock_bh(&recent_lock);
- ret = 1;
+ ret = true;
out:
mutex_unlock(&recent_mutex);
return ret;
static void *recent_seq_start(struct seq_file *seq, loff_t *pos)
{
struct recent_iter_state *st = seq->private;
- struct recent_table *t = st->table;
+ const struct recent_table *t = st->table;
struct recent_entry *e;
loff_t p = *pos;
spin_lock_bh(&recent_lock);
- for (st->bucket = 0; st->bucket < ip_list_hash_size; st->bucket++) {
- list_for_each_entry(e, &t->iphash[st->bucket], list) {
+ for (st->bucket = 0; st->bucket < ip_list_hash_size; st->bucket++)
+ list_for_each_entry(e, &t->iphash[st->bucket], list)
if (p-- == 0)
return e;
- }
- }
return NULL;
}
return 0;
}
-static struct seq_operations recent_seq_ops = {
+static const struct seq_operations recent_seq_ops = {
.start = recent_seq_start,
.next = recent_seq_next,
.stop = recent_seq_stop,
};
#endif /* CONFIG_PROC_FS */
-static struct xt_match recent_match = {
+static struct xt_match recent_match __read_mostly = {
.name = "recent",
.family = AF_INET,
.match = ipt_recent_match,
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("iptables TOS match module");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct ipt_tos_info *info = matchinfo;
return (ip_hdr(skb)->tos == info->tos) ^ info->invert;
}
-static struct xt_match tos_match = {
+static struct xt_match tos_match __read_mostly = {
.name = "tos",
.family = AF_INET,
.match = match,
MODULE_DESCRIPTION("IP tables TTL matching module");
MODULE_LICENSE("GPL");
-static int match(const struct sk_buff *skb,
- const struct net_device *in, const struct net_device *out,
- const struct xt_match *match, const void *matchinfo,
- int offset, unsigned int protoff, int *hotdrop)
+static bool match(const struct sk_buff *skb,
+ const struct net_device *in, const struct net_device *out,
+ const struct xt_match *match, const void *matchinfo,
+ int offset, unsigned int protoff, bool *hotdrop)
{
const struct ipt_ttl_info *info = matchinfo;
const u8 ttl = ip_hdr(skb)->ttl;
switch (info->mode) {
case IPT_TTL_EQ:
- return (ttl == info->ttl);
- break;
+ return ttl == info->ttl;
case IPT_TTL_NE:
- return (!(ttl == info->ttl));
- break;
+ return ttl != info->ttl;
case IPT_TTL_LT:
- return (ttl < info->ttl);
- break;
+ return ttl < info->ttl;
case IPT_TTL_GT:
- return (ttl > info->ttl);
- break;
+ return ttl > info->ttl;
default:
printk(KERN_WARNING "ipt_ttl: unknown mode %d\n",
info->mode);
- return 0;
+ return false;
}
- return 0;
+ return false;
}
-static struct xt_match ttl_match = {
+static struct xt_match ttl_match __read_mostly = {
.name = "ttl",
.family = AF_INET,
.match = match,
#include <net/netfilter/nf_conntrack_core.h>
#include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
static int ipv4_pkt_to_tuple(const struct sk_buff *skb, unsigned int nhoff,
struct nf_conntrack_tuple *tuple)
{
return NF_ACCEPT;
}
-int nf_nat_module_is_loaded = 0;
-EXPORT_SYMBOL_GPL(nf_nat_module_is_loaded);
-
-static u_int32_t ipv4_get_features(const struct nf_conntrack_tuple *tuple)
-{
- if (nf_nat_module_is_loaded)
- return NF_CT_F_NAT;
-
- return NF_CT_F_BASIC;
-}
-
static unsigned int ipv4_confirm(unsigned int hooknum,
struct sk_buff **pskb,
const struct net_device *in,
/* We only do TCP at the moment: is there a better way? */
if (strcmp(sk->sk_prot->name, "TCP")) {
- DEBUGP("SO_ORIGINAL_DST: Not a TCP socket\n");
+ pr_debug("SO_ORIGINAL_DST: Not a TCP socket\n");
return -ENOPROTOOPT;
}
if ((unsigned int) *len < sizeof(struct sockaddr_in)) {
- DEBUGP("SO_ORIGINAL_DST: len %u not %u\n",
- *len, sizeof(struct sockaddr_in));
+ pr_debug("SO_ORIGINAL_DST: len %d not %Zu\n",
+ *len, sizeof(struct sockaddr_in));
return -EINVAL;
}
- h = nf_conntrack_find_get(&tuple, NULL);
+ h = nf_conntrack_find_get(&tuple);
if (h) {
struct sockaddr_in sin;
struct nf_conn *ct = nf_ct_tuplehash_to_ctrack(h);
.tuple.dst.u3.ip;
memset(sin.sin_zero, 0, sizeof(sin.sin_zero));
- DEBUGP("SO_ORIGINAL_DST: %u.%u.%u.%u %u\n",
- NIPQUAD(sin.sin_addr.s_addr), ntohs(sin.sin_port));
+ pr_debug("SO_ORIGINAL_DST: %u.%u.%u.%u %u\n",
+ NIPQUAD(sin.sin_addr.s_addr), ntohs(sin.sin_port));
nf_ct_put(ct);
if (copy_to_user(user, &sin, sizeof(sin)) != 0)
return -EFAULT;
else
return 0;
}
- DEBUGP("SO_ORIGINAL_DST: Can't find %u.%u.%u.%u/%u-%u.%u.%u.%u/%u.\n",
- NIPQUAD(tuple.src.u3.ip), ntohs(tuple.src.u.tcp.port),
- NIPQUAD(tuple.dst.u3.ip), ntohs(tuple.dst.u.tcp.port));
+ pr_debug("SO_ORIGINAL_DST: Can't find %u.%u.%u.%u/%u-%u.%u.%u.%u/%u.\n",
+ NIPQUAD(tuple.src.u3.ip), ntohs(tuple.src.u.tcp.port),
+ NIPQUAD(tuple.dst.u3.ip), ntohs(tuple.dst.u.tcp.port));
return -ENOENT;
}
.print_tuple = ipv4_print_tuple,
.print_conntrack = ipv4_print_conntrack,
.prepare = ipv4_prepare,
- .get_features = ipv4_get_features,
#if defined(CONFIG_NF_CT_NETLINK) || defined(CONFIG_NF_CT_NETLINK_MODULE)
.tuple_to_nfattr = ipv4_tuple_to_nfattr,
.nfattr_to_tuple = ipv4_nfattr_to_tuple,
#include <net/netfilter/nf_conntrack_l4proto.h>
#include <net/netfilter/nf_conntrack_expect.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
#ifdef CONFIG_NF_CT_ACCT
static unsigned int
seq_print_counters(struct seq_file *s,
unsigned int bucket;
};
-static struct list_head *ct_get_first(struct seq_file *seq)
+static struct hlist_node *ct_get_first(struct seq_file *seq)
{
struct ct_iter_state *st = seq->private;
for (st->bucket = 0;
st->bucket < nf_conntrack_htable_size;
st->bucket++) {
- if (!list_empty(&nf_conntrack_hash[st->bucket]))
- return nf_conntrack_hash[st->bucket].next;
+ if (!hlist_empty(&nf_conntrack_hash[st->bucket]))
+ return nf_conntrack_hash[st->bucket].first;
}
return NULL;
}
-static struct list_head *ct_get_next(struct seq_file *seq, struct list_head *head)
+static struct hlist_node *ct_get_next(struct seq_file *seq,
+ struct hlist_node *head)
{
struct ct_iter_state *st = seq->private;
head = head->next;
- while (head == &nf_conntrack_hash[st->bucket]) {
+ while (head == NULL) {
if (++st->bucket >= nf_conntrack_htable_size)
return NULL;
- head = nf_conntrack_hash[st->bucket].next;
+ head = nf_conntrack_hash[st->bucket].first;
}
return head;
}
-static struct list_head *ct_get_idx(struct seq_file *seq, loff_t pos)
+static struct hlist_node *ct_get_idx(struct seq_file *seq, loff_t pos)
{
- struct list_head *head = ct_get_first(seq);
+ struct hlist_node *head = ct_get_first(seq);
if (head)
while (pos && (head = ct_get_next(seq, head)))
return 0;
}
-static struct seq_operations ct_seq_ops = {
+static const struct seq_operations ct_seq_ops = {
.start = ct_seq_start,
.next = ct_seq_next,
.stop = ct_seq_stop,
};
/* expects */
-static void *exp_seq_start(struct seq_file *s, loff_t *pos)
+struct ct_expect_iter_state {
+ unsigned int bucket;
+};
+
+static struct hlist_node *ct_expect_get_first(struct seq_file *seq)
{
- struct list_head *e = &nf_conntrack_expect_list;
- loff_t i;
+ struct ct_expect_iter_state *st = seq->private;
- /* strange seq_file api calls stop even if we fail,
- * thus we need to grab lock since stop unlocks */
- read_lock_bh(&nf_conntrack_lock);
+ for (st->bucket = 0; st->bucket < nf_ct_expect_hsize; st->bucket++) {
+ if (!hlist_empty(&nf_ct_expect_hash[st->bucket]))
+ return nf_ct_expect_hash[st->bucket].first;
+ }
+ return NULL;
+}
- if (list_empty(e))
- return NULL;
+static struct hlist_node *ct_expect_get_next(struct seq_file *seq,
+ struct hlist_node *head)
+{
+ struct ct_expect_iter_state *st = seq->private;
- for (i = 0; i <= *pos; i++) {
- e = e->next;
- if (e == &nf_conntrack_expect_list)
+ head = head->next;
+ while (head == NULL) {
+ if (++st->bucket >= nf_ct_expect_hsize)
return NULL;
+ head = nf_ct_expect_hash[st->bucket].first;
}
- return e;
+ return head;
}
-static void *exp_seq_next(struct seq_file *s, void *v, loff_t *pos)
+static struct hlist_node *ct_expect_get_idx(struct seq_file *seq, loff_t pos)
{
- struct list_head *e = v;
+ struct hlist_node *head = ct_expect_get_first(seq);
- ++*pos;
- e = e->next;
+ if (head)
+ while (pos && (head = ct_expect_get_next(seq, head)))
+ pos--;
+ return pos ? NULL : head;
+}
- if (e == &nf_conntrack_expect_list)
- return NULL;
+static void *exp_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ read_lock_bh(&nf_conntrack_lock);
+ return ct_expect_get_idx(seq, *pos);
+}
- return e;
+static void *exp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return ct_expect_get_next(seq, v);
}
-static void exp_seq_stop(struct seq_file *s, void *v)
+static void exp_seq_stop(struct seq_file *seq, void *v)
{
read_unlock_bh(&nf_conntrack_lock);
}
static int exp_seq_show(struct seq_file *s, void *v)
{
- struct nf_conntrack_expect *exp = v;
+ struct nf_conntrack_expect *exp;
+ struct hlist_node *n = v;
+
+ exp = hlist_entry(n, struct nf_conntrack_expect, hnode);
if (exp->tuple.src.l3num != AF_INET)
return 0;
return seq_putc(s, '\n');
}
-static struct seq_operations exp_seq_ops = {
+static const struct seq_operations exp_seq_ops = {
.start = exp_seq_start,
.next = exp_seq_next,
.stop = exp_seq_stop,
static int exp_open(struct inode *inode, struct file *file)
{
- return seq_open(file, &exp_seq_ops);
+ struct seq_file *seq;
+ struct ct_expect_iter_state *st;
+ int ret;
+
+ st = kmalloc(sizeof(struct ct_expect_iter_state), GFP_KERNEL);
+ if (st == NULL)
+ return -ENOMEM;
+ ret = seq_open(file, &exp_seq_ops);
+ if (ret)
+ goto out_free;
+ seq = file->private_data;
+ seq->private = st;
+ memset(st, 0, sizeof(struct ct_expect_iter_state));
+ return ret;
+out_free:
+ kfree(st);
+ return ret;
}
static const struct file_operations ip_exp_file_ops = {
.open = exp_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release
+ .release = seq_release_private,
};
static void *ct_cpu_seq_start(struct seq_file *seq, loff_t *pos)
return 0;
}
-static struct seq_operations ct_cpu_seq_ops = {
+static const struct seq_operations ct_cpu_seq_ops = {
.start = ct_cpu_seq_start,
.next = ct_cpu_seq_next,
.stop = ct_cpu_seq_stop,
static unsigned long nf_ct_icmp_timeout __read_mostly = 30*HZ;
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
static int icmp_pkt_to_tuple(const struct sk_buff *skb,
unsigned int dataoff,
struct nf_conntrack_tuple *tuple)
if (conntrack->tuplehash[0].tuple.dst.u.icmp.type >= sizeof(valid_new)
|| !valid_new[conntrack->tuplehash[0].tuple.dst.u.icmp.type]) {
/* Can't create a new ICMP `conn' with this. */
- DEBUGP("icmp: can't create new conn with type %u\n",
- conntrack->tuplehash[0].tuple.dst.u.icmp.type);
+ pr_debug("icmp: can't create new conn with type %u\n",
+ conntrack->tuplehash[0].tuple.dst.u.icmp.type);
NF_CT_DUMP_TUPLE(&conntrack->tuplehash[0].tuple);
return 0;
}
/* Ignore ICMP's containing fragments (shouldn't happen) */
if (inside->ip.frag_off & htons(IP_OFFSET)) {
- DEBUGP("icmp_error_message: fragment of proto %u\n",
- inside->ip.protocol);
+ pr_debug("icmp_error_message: fragment of proto %u\n",
+ inside->ip.protocol);
return -NF_ACCEPT;
}
if (!nf_ct_get_tuple(skb, dataoff, dataoff + inside->ip.ihl*4, PF_INET,
inside->ip.protocol, &origtuple,
&nf_conntrack_l3proto_ipv4, innerproto)) {
- DEBUGP("icmp_error_message: ! get_tuple p=%u",
- inside->ip.protocol);
+ pr_debug("icmp_error_message: ! get_tuple p=%u",
+ inside->ip.protocol);
return -NF_ACCEPT;
}
been preserved inside the ICMP. */
if (!nf_ct_invert_tuple(&innertuple, &origtuple,
&nf_conntrack_l3proto_ipv4, innerproto)) {
- DEBUGP("icmp_error_message: no match\n");
+ pr_debug("icmp_error_message: no match\n");
return -NF_ACCEPT;
}
*ctinfo = IP_CT_RELATED;
- h = nf_conntrack_find_get(&innertuple, NULL);
+ h = nf_conntrack_find_get(&innertuple);
if (!h) {
/* Locally generated ICMPs will match inverted if they
haven't been SNAT'ed yet */
/* FIXME: NAT code has to handle half-done double NAT --RR */
if (hooknum == NF_IP_LOCAL_OUT)
- h = nf_conntrack_find_get(&origtuple, NULL);
+ h = nf_conntrack_find_get(&origtuple);
if (!h) {
- DEBUGP("icmp_error_message: no match\n");
+ pr_debug("icmp_error_message: no match\n");
return -NF_ACCEPT;
}
/* Try to get same port: if not, try to change it. */
for (port = ntohs(exp->saved_proto.tcp.port); port != 0; port++) {
exp->tuple.dst.u.tcp.port = htons(port);
- if (nf_conntrack_expect_related(exp) == 0)
+ if (nf_ct_expect_related(exp) == 0)
break;
}
matchoff, matchlen,
buffer, strlen(buffer));
if (ret != NF_ACCEPT)
- nf_conntrack_unexpect_related(exp);
+ nf_ct_unexpect_related(exp);
return ret;
}
#include <linux/types.h>
#include <linux/timer.h>
#include <linux/skbuff.h>
-#include <linux/vmalloc.h>
#include <net/checksum.h>
#include <net/icmp.h>
#include <net/ip.h>
#include <net/netfilter/nf_conntrack_l3proto.h>
#include <net/netfilter/nf_conntrack_l4proto.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
static DEFINE_RWLOCK(nf_nat_lock);
static struct nf_conntrack_l3proto *l3proto = NULL;
/* Calculated at init based on memory size */
static unsigned int nf_nat_htable_size;
+static int nf_nat_vmalloced;
-static struct list_head *bysource;
+static struct hlist_head *bysource;
#define MAX_IP_NAT_PROTO 256
static struct nf_nat_protocol *nf_nat_protos[MAX_IP_NAT_PROTO];
tuple->dst.protonum, 0) % nf_nat_htable_size;
}
-/* Noone using conntrack by the time this called. */
-static void nf_nat_cleanup_conntrack(struct nf_conn *conn)
-{
- struct nf_conn_nat *nat;
- if (!(conn->status & IPS_NAT_DONE_MASK))
- return;
-
- nat = nfct_nat(conn);
- write_lock_bh(&nf_nat_lock);
- list_del(&nat->info.bysource);
- write_unlock_bh(&nf_nat_lock);
-}
-
/* Is this tuple already taken? (not by us) */
int
nf_nat_used_tuple(const struct nf_conntrack_tuple *tuple,
unsigned int h = hash_by_src(tuple);
struct nf_conn_nat *nat;
struct nf_conn *ct;
+ struct hlist_node *n;
read_lock_bh(&nf_nat_lock);
- list_for_each_entry(nat, &bysource[h], info.bysource) {
- ct = (struct nf_conn *)((char *)nat - offsetof(struct nf_conn, data));
+ hlist_for_each_entry(nat, n, &bysource[h], bysource) {
+ ct = nat->ct;
if (same_src(ct, tuple)) {
/* Copy source part from reply tuple. */
nf_ct_invert_tuplepr(result,
manips not an issue. */
if (maniptype == IP_NAT_MANIP_SRC) {
if (find_appropriate_src(orig_tuple, tuple, range)) {
- DEBUGP("get_unique_tuple: Found current src map\n");
+ pr_debug("get_unique_tuple: Found current src map\n");
if (!(range->flags & IP_NAT_RANGE_PROTO_RANDOM))
if (!nf_nat_used_tuple(tuple, ct))
return;
unsigned int hooknum)
{
struct nf_conntrack_tuple curr_tuple, new_tuple;
- struct nf_conn_nat *nat = nfct_nat(ct);
- struct nf_nat_info *info = &nat->info;
+ struct nf_conn_nat *nat;
int have_to_hash = !(ct->status & IPS_NAT_DONE_MASK);
enum nf_nat_manip_type maniptype = HOOK2MANIP(hooknum);
+ /* nat helper or nfctnetlink also setup binding */
+ nat = nfct_nat(ct);
+ if (!nat) {
+ nat = nf_ct_ext_add(ct, NF_CT_EXT_NAT, GFP_ATOMIC);
+ if (nat == NULL) {
+ pr_debug("failed to add NAT extension\n");
+ return NF_ACCEPT;
+ }
+ }
+
NF_CT_ASSERT(hooknum == NF_IP_PRE_ROUTING ||
hooknum == NF_IP_POST_ROUTING ||
hooknum == NF_IP_LOCAL_IN ||
srchash = hash_by_src(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
write_lock_bh(&nf_nat_lock);
- list_add(&info->bysource, &bysource[srchash]);
+ /* nf_conntrack_alter_reply might re-allocate exntension aera */
+ nat = nfct_nat(ct);
+ nat->ct = ct;
+ hlist_add_head(&nat->bysource, &bysource[srchash]);
write_unlock_bh(&nf_nat_lock);
}
return 0;
}
- DEBUGP("icmp_reply_translation: translating error %p manp %u dir %s\n",
- *pskb, manip, dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY");
+ pr_debug("icmp_reply_translation: translating error %p manip %u "
+ "dir %s\n", *pskb, manip,
+ dir == IP_CT_DIR_ORIGINAL ? "ORIG" : "REPLY");
/* rcu_read_lock()ed by nf_hook_slow */
l4proto = __nf_ct_l4proto_find(PF_INET, inside->ip.protocol);
EXPORT_SYMBOL_GPL(nf_nat_port_range_to_nfattr);
#endif
+/* Noone using conntrack by the time this called. */
+static void nf_nat_cleanup_conntrack(struct nf_conn *ct)
+{
+ struct nf_conn_nat *nat = nf_ct_ext_find(ct, NF_CT_EXT_NAT);
+
+ if (nat == NULL || nat->ct == NULL)
+ return;
+
+ NF_CT_ASSERT(nat->ct->status & IPS_NAT_DONE_MASK);
+
+ write_lock_bh(&nf_nat_lock);
+ hlist_del(&nat->bysource);
+ nat->ct = NULL;
+ write_unlock_bh(&nf_nat_lock);
+}
+
+static void nf_nat_move_storage(struct nf_conn *conntrack, void *old)
+{
+ struct nf_conn_nat *new_nat = nf_ct_ext_find(conntrack, NF_CT_EXT_NAT);
+ struct nf_conn_nat *old_nat = (struct nf_conn_nat *)old;
+ struct nf_conn *ct = old_nat->ct;
+ unsigned int srchash;
+
+ if (!(ct->status & IPS_NAT_DONE_MASK))
+ return;
+
+ srchash = hash_by_src(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
+
+ write_lock_bh(&nf_nat_lock);
+ hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource);
+ new_nat->ct = ct;
+ write_unlock_bh(&nf_nat_lock);
+}
+
+static struct nf_ct_ext_type nat_extend __read_mostly = {
+ .len = sizeof(struct nf_conn_nat),
+ .align = __alignof__(struct nf_conn_nat),
+ .destroy = nf_nat_cleanup_conntrack,
+ .move = nf_nat_move_storage,
+ .id = NF_CT_EXT_NAT,
+ .flags = NF_CT_EXT_F_PREALLOC,
+};
+
static int __init nf_nat_init(void)
{
size_t i;
+ int ret;
+
+ ret = nf_ct_extend_register(&nat_extend);
+ if (ret < 0) {
+ printk(KERN_ERR "nf_nat_core: Unable to register extension\n");
+ return ret;
+ }
/* Leave them the same for the moment. */
nf_nat_htable_size = nf_conntrack_htable_size;
- /* One vmalloc for both hash tables */
- bysource = vmalloc(sizeof(struct list_head) * nf_nat_htable_size);
- if (!bysource)
- return -ENOMEM;
+ bysource = nf_ct_alloc_hashtable(&nf_nat_htable_size,
+ &nf_nat_vmalloced);
+ if (!bysource) {
+ ret = -ENOMEM;
+ goto cleanup_extend;
+ }
/* Sew in builtin protocols. */
write_lock_bh(&nf_nat_lock);
write_unlock_bh(&nf_nat_lock);
for (i = 0; i < nf_nat_htable_size; i++) {
- INIT_LIST_HEAD(&bysource[i]);
+ INIT_HLIST_HEAD(&bysource[i]);
}
- /* FIXME: Man, this is a hack. <SIGH> */
- NF_CT_ASSERT(rcu_dereference(nf_conntrack_destroyed) == NULL);
- rcu_assign_pointer(nf_conntrack_destroyed, nf_nat_cleanup_conntrack);
-
/* Initialize fake conntrack so that NAT will skip it */
nf_conntrack_untracked.status |= IPS_NAT_DONE_MASK;
l3proto = nf_ct_l3proto_find_get((u_int16_t)AF_INET);
return 0;
+
+ cleanup_extend:
+ nf_ct_extend_unregister(&nat_extend);
+ return ret;
}
/* Clear NAT section of all conntracks, in case we're loaded again. */
static void __exit nf_nat_cleanup(void)
{
nf_ct_iterate_cleanup(&clean_nat, NULL);
- rcu_assign_pointer(nf_conntrack_destroyed, NULL);
synchronize_rcu();
- vfree(bysource);
+ nf_ct_free_hashtable(bysource, nf_nat_vmalloced, nf_nat_htable_size);
nf_ct_l3proto_put(l3proto);
+ nf_ct_extend_unregister(&nat_extend);
}
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("ftp NAT helper");
MODULE_ALIAS("ip_nat_ftp");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* FIXME: Time out? --RR */
static int
sprintf(buffer, "%u,%u,%u,%u,%u,%u",
NIPQUAD(newip), port>>8, port&0xFF);
- DEBUGP("calling nf_nat_mangle_tcp_packet\n");
+ pr_debug("calling nf_nat_mangle_tcp_packet\n");
return nf_nat_mangle_tcp_packet(pskb, ct, ctinfo, matchoff,
matchlen, buffer, strlen(buffer));
sprintf(buffer, "|1|%u.%u.%u.%u|%u|", NIPQUAD(newip), port);
- DEBUGP("calling nf_nat_mangle_tcp_packet\n");
+ pr_debug("calling nf_nat_mangle_tcp_packet\n");
return nf_nat_mangle_tcp_packet(pskb, ct, ctinfo, matchoff,
matchlen, buffer, strlen(buffer));
sprintf(buffer, "|||%u|", port);
- DEBUGP("calling nf_nat_mangle_tcp_packet\n");
+ pr_debug("calling nf_nat_mangle_tcp_packet\n");
return nf_nat_mangle_tcp_packet(pskb, ct, ctinfo, matchoff,
matchlen, buffer, strlen(buffer));
int dir = CTINFO2DIR(ctinfo);
struct nf_conn *ct = exp->master;
- DEBUGP("FTP_NAT: type %i, off %u len %u\n", type, matchoff, matchlen);
+ pr_debug("FTP_NAT: type %i, off %u len %u\n", type, matchoff, matchlen);
/* Connection will come from wherever this packet goes, hence !dir */
newip = ct->tuplehash[!dir].tuple.dst.u3.ip;
/* Try to get same port: if not, try to change it. */
for (port = ntohs(exp->saved_proto.tcp.port); port != 0; port++) {
exp->tuple.dst.u.tcp.port = htons(port);
- if (nf_conntrack_expect_related(exp) == 0)
+ if (nf_ct_expect_related(exp) == 0)
break;
}
return NF_DROP;
if (!mangle[type](pskb, newip, port, matchoff, matchlen, ct, ctinfo)) {
- nf_conntrack_unexpect_related(exp);
+ nf_ct_unexpect_related(exp);
return NF_DROP;
}
return NF_ACCEPT;
#include <net/netfilter/nf_conntrack_expect.h>
#include <linux/netfilter/nf_conntrack_h323.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/****************************************************************************/
static int set_addr(struct sk_buff **pskb,
unsigned char **data, int dataoff,
(ntohl(addr.ip) & 0xff000000) == 0x7f000000)
i = 0;
- DEBUGP
- ("nf_nat_ras: set signal address "
- "%u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
- NIPQUAD(ip), port,
- NIPQUAD(ct->tuplehash[!dir].tuple.dst.
- ip), info->sig_port[!dir]);
+ pr_debug("nf_nat_ras: set signal address "
+ "%u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
+ NIPQUAD(addr.ip), port,
+ NIPQUAD(ct->tuplehash[!dir].tuple.dst.u3.ip),
+ info->sig_port[!dir]);
return set_h225_addr(pskb, data, 0, &taddr[i],
&ct->tuplehash[!dir].
tuple.dst.u3,
} else if (addr.ip == ct->tuplehash[dir].tuple.dst.u3.ip &&
port == info->sig_port[dir]) {
/* GK->GW */
- DEBUGP
- ("nf_nat_ras: set signal address "
- "%u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
- NIPQUAD(ip), port,
- NIPQUAD(ct->tuplehash[!dir].tuple.src.
- ip), info->sig_port[!dir]);
+ pr_debug("nf_nat_ras: set signal address "
+ "%u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
+ NIPQUAD(addr.ip), port,
+ NIPQUAD(ct->tuplehash[!dir].tuple.src.u3.ip),
+ info->sig_port[!dir]);
return set_h225_addr(pskb, data, 0, &taddr[i],
&ct->tuplehash[!dir].
tuple.src.u3,
if (get_h225_addr(ct, *data, &taddr[i], &addr, &port) &&
addr.ip == ct->tuplehash[dir].tuple.src.u3.ip &&
port == ct->tuplehash[dir].tuple.src.u.udp.port) {
- DEBUGP("nf_nat_ras: set rasAddress "
- "%u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
- NIPQUAD(ip), ntohs(port),
- NIPQUAD(ct->tuplehash[!dir].tuple.dst.u3.ip),
- ntohs(ct->tuplehash[!dir].tuple.dst.u.udp.
- port));
+ pr_debug("nf_nat_ras: set rasAddress "
+ "%u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
+ NIPQUAD(addr.ip), ntohs(port),
+ NIPQUAD(ct->tuplehash[!dir].tuple.dst.u3.ip),
+ ntohs(ct->tuplehash[!dir].tuple.dst.u.udp.port));
return set_h225_addr(pskb, data, 0, &taddr[i],
&ct->tuplehash[!dir].tuple.dst.u3,
ct->tuplehash[!dir].tuple.
for (nated_port = ntohs(rtp_exp->tuple.dst.u.udp.port);
nated_port != 0; nated_port += 2) {
rtp_exp->tuple.dst.u.udp.port = htons(nated_port);
- if (nf_conntrack_expect_related(rtp_exp) == 0) {
+ if (nf_ct_expect_related(rtp_exp) == 0) {
rtcp_exp->tuple.dst.u.udp.port =
htons(nated_port + 1);
- if (nf_conntrack_expect_related(rtcp_exp) == 0)
+ if (nf_ct_expect_related(rtcp_exp) == 0)
break;
- nf_conntrack_unexpect_related(rtp_exp);
+ nf_ct_unexpect_related(rtp_exp);
}
}
info->rtp_port[i][dir] = rtp_port;
info->rtp_port[i][!dir] = htons(nated_port);
} else {
- nf_conntrack_unexpect_related(rtp_exp);
- nf_conntrack_unexpect_related(rtcp_exp);
+ nf_ct_unexpect_related(rtp_exp);
+ nf_ct_unexpect_related(rtcp_exp);
return -1;
}
/* Success */
- DEBUGP("nf_nat_h323: expect RTP %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
- NIPQUAD(rtp_exp->tuple.src.ip),
- ntohs(rtp_exp->tuple.src.u.udp.port),
- NIPQUAD(rtp_exp->tuple.dst.ip),
- ntohs(rtp_exp->tuple.dst.u.udp.port));
- DEBUGP("nf_nat_h323: expect RTCP %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
- NIPQUAD(rtcp_exp->tuple.src.ip),
- ntohs(rtcp_exp->tuple.src.u.udp.port),
- NIPQUAD(rtcp_exp->tuple.dst.ip),
- ntohs(rtcp_exp->tuple.dst.u.udp.port));
+ pr_debug("nf_nat_h323: expect RTP %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
+ NIPQUAD(rtp_exp->tuple.src.u3.ip),
+ ntohs(rtp_exp->tuple.src.u.udp.port),
+ NIPQUAD(rtp_exp->tuple.dst.u3.ip),
+ ntohs(rtp_exp->tuple.dst.u.udp.port));
+ pr_debug("nf_nat_h323: expect RTCP %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
+ NIPQUAD(rtcp_exp->tuple.src.u3.ip),
+ ntohs(rtcp_exp->tuple.src.u.udp.port),
+ NIPQUAD(rtcp_exp->tuple.dst.u3.ip),
+ ntohs(rtcp_exp->tuple.dst.u.udp.port));
return 0;
}
/* Try to get same port: if not, try to change it. */
for (; nated_port != 0; nated_port++) {
exp->tuple.dst.u.tcp.port = htons(nated_port);
- if (nf_conntrack_expect_related(exp) == 0)
+ if (nf_ct_expect_related(exp) == 0)
break;
}
if (set_h245_addr(pskb, data, dataoff, taddr,
&ct->tuplehash[!dir].tuple.dst.u3,
htons(nated_port)) < 0) {
- nf_conntrack_unexpect_related(exp);
+ nf_ct_unexpect_related(exp);
return -1;
}
- DEBUGP("nf_nat_h323: expect T.120 %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
- NIPQUAD(exp->tuple.src.ip), ntohs(exp->tuple.src.u.tcp.port),
- NIPQUAD(exp->tuple.dst.ip), ntohs(exp->tuple.dst.u.tcp.port));
+ pr_debug("nf_nat_h323: expect T.120 %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
+ NIPQUAD(exp->tuple.src.u3.ip),
+ ntohs(exp->tuple.src.u.tcp.port),
+ NIPQUAD(exp->tuple.dst.u3.ip),
+ ntohs(exp->tuple.dst.u.tcp.port));
return 0;
}
/* Try to get same port: if not, try to change it. */
for (; nated_port != 0; nated_port++) {
exp->tuple.dst.u.tcp.port = htons(nated_port);
- if (nf_conntrack_expect_related(exp) == 0)
+ if (nf_ct_expect_related(exp) == 0)
break;
}
info->sig_port[dir] = port;
info->sig_port[!dir] = htons(nated_port);
} else {
- nf_conntrack_unexpect_related(exp);
+ nf_ct_unexpect_related(exp);
return -1;
}
- DEBUGP("nf_nat_q931: expect H.245 %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
- NIPQUAD(exp->tuple.src.ip), ntohs(exp->tuple.src.u.tcp.port),
- NIPQUAD(exp->tuple.dst.ip), ntohs(exp->tuple.dst.u.tcp.port));
+ pr_debug("nf_nat_q931: expect H.245 %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
+ NIPQUAD(exp->tuple.src.u3.ip),
+ ntohs(exp->tuple.src.u.tcp.port),
+ NIPQUAD(exp->tuple.dst.u3.ip),
+ ntohs(exp->tuple.dst.u.tcp.port));
return 0;
}
/* Try to get same port: if not, try to change it. */
for (; nated_port != 0; nated_port++) {
exp->tuple.dst.u.tcp.port = htons(nated_port);
- if (nf_conntrack_expect_related(exp) == 0)
+ if (nf_ct_expect_related(exp) == 0)
break;
}
info->sig_port[!dir]);
}
} else {
- nf_conntrack_unexpect_related(exp);
+ nf_ct_unexpect_related(exp);
return -1;
}
/* Success */
- DEBUGP("nf_nat_ras: expect Q.931 %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
- NIPQUAD(exp->tuple.src.ip), ntohs(exp->tuple.src.u.tcp.port),
- NIPQUAD(exp->tuple.dst.ip), ntohs(exp->tuple.dst.u.tcp.port));
+ pr_debug("nf_nat_ras: expect Q.931 %u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
+ NIPQUAD(exp->tuple.src.u3.ip),
+ ntohs(exp->tuple.src.u.tcp.port),
+ NIPQUAD(exp->tuple.dst.u3.ip),
+ ntohs(exp->tuple.dst.u.tcp.port));
return 0;
}
/* Try to get same port: if not, try to change it. */
for (nated_port = ntohs(port); nated_port != 0; nated_port++) {
exp->tuple.dst.u.tcp.port = htons(nated_port);
- if (nf_conntrack_expect_related(exp) == 0)
+ if (nf_ct_expect_related(exp) == 0)
break;
}
if (!set_h225_addr(pskb, data, dataoff, taddr,
&ct->tuplehash[!dir].tuple.dst.u3,
htons(nated_port)) == 0) {
- nf_conntrack_unexpect_related(exp);
+ nf_ct_unexpect_related(exp);
return -1;
}
/* Success */
- DEBUGP("nf_nat_q931: expect Call Forwarding "
- "%u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
- NIPQUAD(exp->tuple.src.ip), ntohs(exp->tuple.src.u.tcp.port),
- NIPQUAD(exp->tuple.dst.ip), ntohs(exp->tuple.dst.u.tcp.port));
+ pr_debug("nf_nat_q931: expect Call Forwarding "
+ "%u.%u.%u.%u:%hu->%u.%u.%u.%u:%hu\n",
+ NIPQUAD(exp->tuple.src.u3.ip),
+ ntohs(exp->tuple.src.u.tcp.port),
+ NIPQUAD(exp->tuple.dst.u3.ip),
+ ntohs(exp->tuple.dst.u.tcp.port));
return 0;
}
rcu_assign_pointer(nat_h245_hook, nat_h245);
rcu_assign_pointer(nat_callforwarding_hook, nat_callforwarding);
rcu_assign_pointer(nat_q931_hook, nat_q931);
-
- DEBUGP("nf_nat_h323: init success\n");
return 0;
}
#include <net/netfilter/nf_nat_core.h>
#include <net/netfilter/nf_nat_helper.h>
-#if 0
-#define DEBUGP printk
-#define DUMP_OFFSET(x) printk("offset_before=%d, offset_after=%d, correction_pos=%u\n", x->offset_before, x->offset_after, x->correction_pos);
-#else
-#define DEBUGP(format, args...)
-#define DUMP_OFFSET(x)
-#endif
+#define DUMP_OFFSET(x) \
+ pr_debug("offset_before=%d, offset_after=%d, correction_pos=%u\n", \
+ x->offset_before, x->offset_after, x->correction_pos);
static DEFINE_SPINLOCK(nf_nat_seqofs_lock);
struct nf_nat_seq *this_way, *other_way;
struct nf_conn_nat *nat = nfct_nat(ct);
- DEBUGP("nf_nat_resize_packet: old_size = %u, new_size = %u\n",
- (*skb)->len, new_size);
+ pr_debug("adjust_tcp_sequence: seq = %u, sizediff = %d\n",
+ ntohl(seq), seq);
dir = CTINFO2DIR(ctinfo);
- this_way = &nat->info.seq[dir];
- other_way = &nat->info.seq[!dir];
+ this_way = &nat->seq[dir];
+ other_way = &nat->seq[!dir];
- DEBUGP("nf_nat_resize_packet: Seq_offset before: ");
+ pr_debug("nf_nat_resize_packet: Seq_offset before: ");
DUMP_OFFSET(this_way);
spin_lock_bh(&nf_nat_seqofs_lock);
}
spin_unlock_bh(&nf_nat_seqofs_lock);
- DEBUGP("nf_nat_resize_packet: Seq_offset after: ");
+ pr_debug("nf_nat_resize_packet: Seq_offset after: ");
DUMP_OFFSET(this_way);
}
/* update skb info */
if (rep_len > match_len) {
- DEBUGP("nf_nat_mangle_packet: Extending packet by "
- "%u from %u bytes\n", rep_len - match_len,
- skb->len);
+ pr_debug("nf_nat_mangle_packet: Extending packet by "
+ "%u from %u bytes\n", rep_len - match_len, skb->len);
skb_put(skb, rep_len - match_len);
} else {
- DEBUGP("nf_nat_mangle_packet: Shrinking packet from "
- "%u from %u bytes\n", match_len - rep_len,
- skb->len);
+ pr_debug("nf_nat_mangle_packet: Shrinking packet from "
+ "%u from %u bytes\n", match_len - rep_len, skb->len);
__skb_trim(skb, skb->len + rep_len - match_len);
}
datalen = (*pskb)->len - iph->ihl*4;
if ((*pskb)->ip_summed != CHECKSUM_PARTIAL) {
if (!(rt->rt_flags & RTCF_LOCAL) &&
- (*pskb)->dev->features & NETIF_F_ALL_CSUM) {
+ (*pskb)->dev->features & NETIF_F_V4_CSUM) {
(*pskb)->ip_summed = CHECKSUM_PARTIAL;
(*pskb)->csum_start = skb_headroom(*pskb) +
skb_network_offset(*pskb) +
tcph->check = 0;
tcph->check = tcp_v4_check(datalen,
iph->saddr, iph->daddr,
- csum_partial((char *)tcph,
+ csum_partial(tcph,
datalen, 0));
}
} else
if ((*pskb)->ip_summed != CHECKSUM_PARTIAL) {
if (!(rt->rt_flags & RTCF_LOCAL) &&
- (*pskb)->dev->features & NETIF_F_ALL_CSUM) {
+ (*pskb)->dev->features & NETIF_F_V4_CSUM) {
(*pskb)->ip_summed = CHECKSUM_PARTIAL;
(*pskb)->csum_start = skb_headroom(*pskb) +
skb_network_offset(*pskb) +
udph->check = 0;
udph->check = csum_tcpudp_magic(iph->saddr, iph->daddr,
datalen, IPPROTO_UDP,
- csum_partial((char *)udph,
+ csum_partial(udph,
datalen, 0));
if (!udph->check)
udph->check = CSUM_MANGLED_0;
new_end_seq = htonl(ntohl(sack->end_seq)
- natseq->offset_before);
- DEBUGP("sack_adjust: start_seq: %d->%d, end_seq: %d->%d\n",
- ntohl(sack->start_seq), new_start_seq,
- ntohl(sack->end_seq), new_end_seq);
+ pr_debug("sack_adjust: start_seq: %d->%d, end_seq: %d->%d\n",
+ ntohl(sack->start_seq), new_start_seq,
+ ntohl(sack->end_seq), new_end_seq);
nf_proto_csum_replace4(&tcph->check, skb,
sack->start_seq, new_start_seq, 0);
op[1] >= 2+TCPOLEN_SACK_PERBLOCK &&
((op[1] - 2) % TCPOLEN_SACK_PERBLOCK) == 0)
sack_adjust(*pskb, tcph, optoff+2,
- optoff+op[1],
- &nat->info.seq[!dir]);
+ optoff+op[1], &nat->seq[!dir]);
optoff += op[1];
}
}
dir = CTINFO2DIR(ctinfo);
- this_way = &nat->info.seq[dir];
- other_way = &nat->info.seq[!dir];
+ this_way = &nat->seq[dir];
+ other_way = &nat->seq[!dir];
if (!skb_make_writable(pskb, ip_hdrlen(*pskb) + sizeof(*tcph)))
return 0;
nf_proto_csum_replace4(&tcph->check, *pskb, tcph->seq, newseq, 0);
nf_proto_csum_replace4(&tcph->check, *pskb, tcph->ack_seq, newack, 0);
- DEBUGP("Adjusting sequence number from %u->%u, ack from %u->%u\n",
- ntohl(tcph->seq), ntohl(newseq), ntohl(tcph->ack_seq),
- ntohl(newack));
+ pr_debug("Adjusting sequence number from %u->%u, ack from %u->%u\n",
+ ntohl(tcph->seq), ntohl(newseq), ntohl(tcph->ack_seq),
+ ntohl(newack));
tcph->seq = newseq;
tcph->ack_seq = newack;
#include <net/netfilter/nf_conntrack_expect.h>
#include <linux/netfilter/nf_conntrack_irc.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
MODULE_DESCRIPTION("IRC (DCC) NAT helper");
MODULE_LICENSE("GPL");
u_int16_t port;
unsigned int ret;
- DEBUGP("IRC_NAT: info (seq %u + %u) in %u\n",
- expect->seq, exp_irc_info->len, ntohl(tcph->seq));
-
/* Reply comes from server. */
exp->saved_proto.tcp.port = exp->tuple.dst.u.tcp.port;
exp->dir = IP_CT_DIR_REPLY;
/* Try to get same port: if not, try to change it. */
for (port = ntohs(exp->saved_proto.tcp.port); port != 0; port++) {
exp->tuple.dst.u.tcp.port = htons(port);
- if (nf_conntrack_expect_related(exp) == 0)
+ if (nf_ct_expect_related(exp) == 0)
break;
}
ip = ntohl(exp->master->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip);
sprintf(buffer, "%u %u", ip, port);
- DEBUGP("nf_nat_irc: inserting '%s' == %u.%u.%u.%u, port %u\n",
- buffer, NIPQUAD(ip), port);
+ pr_debug("nf_nat_irc: inserting '%s' == %u.%u.%u.%u, port %u\n",
+ buffer, NIPQUAD(ip), port);
ret = nf_nat_mangle_tcp_packet(pskb, exp->master, ctinfo,
matchoff, matchlen, buffer,
strlen(buffer));
if (ret != NF_ACCEPT)
- nf_conntrack_unexpect_related(exp);
+ nf_ct_unexpect_related(exp);
return ret;
}
MODULE_DESCRIPTION("Netfilter NAT helper module for PPTP");
MODULE_ALIAS("ip_nat_pptp");
-#if 0
-extern const char *pptp_msg_name[];
-#define DEBUGP(format, args...) printk(KERN_DEBUG "%s:%s: " format, __FILE__, \
- __FUNCTION__, ## args)
-#else
-#define DEBUGP(format, args...)
-#endif
-
static void pptp_nat_expected(struct nf_conn *ct,
struct nf_conntrack_expect *exp)
{
/* And here goes the grand finale of corrosion... */
if (exp->dir == IP_CT_DIR_ORIGINAL) {
- DEBUGP("we are PNS->PAC\n");
+ pr_debug("we are PNS->PAC\n");
/* therefore, build tuple for PAC->PNS */
t.src.l3num = AF_INET;
t.src.u3.ip = master->tuplehash[!exp->dir].tuple.src.u3.ip;
t.dst.u.gre.key = ct_pptp_info->pns_call_id;
t.dst.protonum = IPPROTO_GRE;
} else {
- DEBUGP("we are PAC->PNS\n");
+ pr_debug("we are PAC->PNS\n");
/* build tuple for PNS->PAC */
t.src.l3num = AF_INET;
t.src.u3.ip = master->tuplehash[!exp->dir].tuple.src.u3.ip;
t.dst.protonum = IPPROTO_GRE;
}
- DEBUGP("trying to unexpect other dir: ");
+ pr_debug("trying to unexpect other dir: ");
NF_CT_DUMP_TUPLE(&t);
- other_exp = nf_conntrack_expect_find_get(&t);
+ other_exp = nf_ct_expect_find_get(&t);
if (other_exp) {
- nf_conntrack_unexpect_related(other_exp);
- nf_conntrack_expect_put(other_exp);
- DEBUGP("success\n");
+ nf_ct_unexpect_related(other_exp);
+ nf_ct_expect_put(other_exp);
+ pr_debug("success\n");
} else {
- DEBUGP("not found!\n");
+ pr_debug("not found!\n");
}
/* This must be a fresh one. */
cid_off = offsetof(union pptp_ctrl_union, clrreq.callID);
break;
default:
- DEBUGP("unknown outbound packet 0x%04x:%s\n", msg,
- (msg <= PPTP_MSG_MAX)?
- pptp_msg_name[msg]:pptp_msg_name[0]);
+ pr_debug("unknown outbound packet 0x%04x:%s\n", msg,
+ msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] :
+ pptp_msg_name[0]);
/* fall through */
case PPTP_SET_LINK_INFO:
/* only need to NAT in case PAC is behind NAT box */
/* only OUT_CALL_REQUEST, IN_CALL_REPLY, CALL_CLEAR_REQUEST pass
* down to here */
- DEBUGP("altering call id from 0x%04x to 0x%04x\n",
- ntohs(REQ_CID(pptpReq, cid_off)), ntohs(new_callid));
+ pr_debug("altering call id from 0x%04x to 0x%04x\n",
+ ntohs(REQ_CID(pptpReq, cid_off)), ntohs(new_callid));
/* mangle packet */
if (nf_nat_mangle_tcp_packet(pskb, ct, ctinfo,
pcid_off = offsetof(union pptp_ctrl_union, setlink.peersCallID);
break;
default:
- DEBUGP("unknown inbound packet %s\n", (msg <= PPTP_MSG_MAX)?
- pptp_msg_name[msg]:pptp_msg_name[0]);
+ pr_debug("unknown inbound packet %s\n",
+ msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] :
+ pptp_msg_name[0]);
/* fall through */
case PPTP_START_SESSION_REQUEST:
case PPTP_START_SESSION_REPLY:
* WAN_ERROR_NOTIFY, CALL_DISCONNECT_NOTIFY pass down here */
/* mangle packet */
- DEBUGP("altering peer call id from 0x%04x to 0x%04x\n",
- ntohs(REQ_CID(pptpReq, pcid_off)), ntohs(new_pcid));
+ pr_debug("altering peer call id from 0x%04x to 0x%04x\n",
+ ntohs(REQ_CID(pptpReq, pcid_off)), ntohs(new_pcid));
if (nf_nat_mangle_tcp_packet(pskb, ct, ctinfo,
pcid_off + sizeof(struct pptp_pkt_hdr) +
MODULE_AUTHOR("Harald Welte <laforge@gnumonks.org>");
MODULE_DESCRIPTION("Netfilter NAT protocol helper module for GRE");
-#if 0
-#define DEBUGP(format, args...) printk(KERN_DEBUG "%s:%s: " format, __FILE__, \
- __FUNCTION__, ## args)
-#else
-#define DEBUGP(x, args...)
-#endif
-
/* is key in given range between min and max */
static int
gre_in_range(const struct nf_conntrack_tuple *tuple,
keyptr = &tuple->dst.u.gre.key;
if (!(range->flags & IP_NAT_RANGE_PROTO_SPECIFIED)) {
- DEBUGP("%p: NATing GRE PPTP\n", conntrack);
+ pr_debug("%p: NATing GRE PPTP\n", conntrack);
min = 1;
range_size = 0xffff;
} else {
range_size = ntohs(range->max.gre.key) - min + 1;
}
- DEBUGP("min = %u, range_size = %u\n", min, range_size);
+ pr_debug("min = %u, range_size = %u\n", min, range_size);
for (i = 0; i < range_size; i++, key++) {
*keyptr = htons(min + key % range_size);
return 1;
}
- DEBUGP("%p: no NAT mapping\n", conntrack);
+ pr_debug("%p: no NAT mapping\n", conntrack);
return 0;
}
* Try to behave like "nf_nat_proto_unknown" */
break;
case GRE_VERSION_PPTP:
- DEBUGP("call_id -> 0x%04x\n", ntohs(tuple->dst.u.gre.key));
+ pr_debug("call_id -> 0x%04x\n", ntohs(tuple->dst.u.gre.key));
pgreh->call_id = tuple->dst.u.gre.key;
break;
default:
- DEBUGP("can't nat unknown GRE version\n");
+ pr_debug("can't nat unknown GRE version\n");
return 0;
}
return 1;
#include <net/netfilter/nf_nat_core.h>
#include <net/netfilter/nf_nat_rule.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
#define NAT_VALID_HOOKS ((1<<NF_IP_PRE_ROUTING) | (1<<NF_IP_POST_ROUTING) | (1<<NF_IP_LOCAL_OUT))
static struct
return nf_nat_setup_info(ct, &mr->range[0], hooknum);
}
-static int ipt_snat_checkentry(const char *tablename,
- const void *entry,
- const struct xt_target *target,
- void *targinfo,
- unsigned int hook_mask)
+static bool ipt_snat_checkentry(const char *tablename,
+ const void *entry,
+ const struct xt_target *target,
+ void *targinfo,
+ unsigned int hook_mask)
{
struct nf_nat_multi_range_compat *mr = targinfo;
/* Must be a valid range */
if (mr->rangesize != 1) {
printk("SNAT: multiple ranges no longer supported\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static int ipt_dnat_checkentry(const char *tablename,
- const void *entry,
- const struct xt_target *target,
- void *targinfo,
- unsigned int hook_mask)
+static bool ipt_dnat_checkentry(const char *tablename,
+ const void *entry,
+ const struct xt_target *target,
+ void *targinfo,
+ unsigned int hook_mask)
{
struct nf_nat_multi_range_compat *mr = targinfo;
/* Must be a valid range */
if (mr->rangesize != 1) {
printk("DNAT: multiple ranges no longer supported\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-inline unsigned int
+unsigned int
alloc_null_binding(struct nf_conn *ct, unsigned int hooknum)
{
/* Force range to this IP; let proto decide mapping for
struct nf_nat_range range
= { IP_NAT_RANGE_MAP_IPS, ip, ip, { 0 }, { 0 } };
- DEBUGP("Allocating NULL binding for %p (%u.%u.%u.%u)\n",
- ct, NIPQUAD(ip));
+ pr_debug("Allocating NULL binding for %p (%u.%u.%u.%u)\n",
+ ct, NIPQUAD(ip));
return nf_nat_setup_info(ct, &range, hooknum);
}
struct nf_nat_range range
= { IP_NAT_RANGE_MAP_IPS, ip, ip, { all }, { all } };
- DEBUGP("Allocating NULL binding for confirmed %p (%u.%u.%u.%u)\n",
- ct, NIPQUAD(ip));
+ pr_debug("Allocating NULL binding for confirmed %p (%u.%u.%u.%u)\n",
+ ct, NIPQUAD(ip));
return nf_nat_setup_info(ct, &range, hooknum);
}
return ret;
}
-static struct xt_target ipt_snat_reg = {
+static struct xt_target ipt_snat_reg __read_mostly = {
.name = "SNAT",
.target = ipt_snat_target,
.targetsize = sizeof(struct nf_nat_multi_range_compat),
.family = AF_INET,
};
-static struct xt_target ipt_dnat_reg = {
+static struct xt_target ipt_dnat_reg __read_mostly = {
.name = "DNAT",
.target = ipt_dnat_target,
.targetsize = sizeof(struct nf_nat_multi_range_compat),
MODULE_DESCRIPTION("SIP NAT helper");
MODULE_ALIAS("ip_nat_sip");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
struct addr_map {
struct {
char src[sizeof("nnn.nnn.nnn.nnn:nnnnn")];
__be32 newip;
u_int16_t port;
- DEBUGP("ip_nat_sdp():\n");
-
/* Connection will come from reply */
- newip = ct->tuplehash[!dir].tuple.dst.u3.ip;
+ if (ct->tuplehash[dir].tuple.src.u3.ip ==
+ ct->tuplehash[!dir].tuple.dst.u3.ip)
+ newip = exp->tuple.dst.u3.ip;
+ else
+ newip = ct->tuplehash[!dir].tuple.dst.u3.ip;
exp->saved_ip = exp->tuple.dst.u3.ip;
exp->tuple.dst.u3.ip = newip;
/* Try to get same port: if not, try to change it. */
for (port = ntohs(exp->saved_proto.udp.port); port != 0; port++) {
exp->tuple.dst.u.udp.port = htons(port);
- if (nf_conntrack_expect_related(exp) == 0)
+ if (nf_ct_expect_related(exp) == 0)
break;
}
return NF_DROP;
if (!mangle_sdp(pskb, ctinfo, ct, newip, port, dptr)) {
- nf_conntrack_unexpect_related(exp);
+ nf_ct_unexpect_related(exp);
return NF_DROP;
}
return NF_ACCEPT;
.tuple.src.l3num = AF_INET,
.tuple.src.u.udp.port = __constant_htons(SNMP_PORT),
.tuple.dst.protonum = IPPROTO_UDP,
- .mask.src.l3num = 0xFFFF,
- .mask.src.u.udp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
};
static struct nf_conntrack_helper snmp_trap_helper __read_mostly = {
.tuple.src.l3num = AF_INET,
.tuple.src.u.udp.port = __constant_htons(SNMP_TRAP_PORT),
.tuple.dst.protonum = IPPROTO_UDP,
- .mask.src.l3num = 0xFFFF,
- .mask.src.u.udp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
};
/*****************************************************************************
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_core.h>
+#include <net/netfilter/nf_conntrack_extend.h>
#include <net/netfilter/nf_nat.h>
#include <net/netfilter/nf_nat_rule.h>
#include <net/netfilter/nf_nat_protocol.h>
#include <net/netfilter/nf_nat_helper.h>
#include <linux/netfilter_ipv4/ip_tables.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
#ifdef CONFIG_XFRM
static void nat_decode_session(struct sk_buff *skb, struct flowi *fl)
{
return NF_ACCEPT;
nat = nfct_nat(ct);
- if (!nat)
- return NF_ACCEPT;
+ if (!nat) {
+ nat = nf_ct_ext_add(ct, NF_CT_EXT_NAT, GFP_ATOMIC);
+ if (nat == NULL) {
+ pr_debug("failed to add NAT extension\n");
+ return NF_ACCEPT;
+ }
+ }
switch (ctinfo) {
case IP_CT_RELATED:
return ret;
}
} else
- DEBUGP("Already setup manip %s for ct %p\n",
- maniptype == IP_NAT_MANIP_SRC ? "SRC" : "DST",
- ct);
+ pr_debug("Already setup manip %s for ct %p\n",
+ maniptype == IP_NAT_MANIP_SRC ? "SRC" : "DST",
+ ct);
break;
default:
ct = nf_ct_get(*pskb, &ctinfo);
if (ct && test_bit(IPS_SEQ_ADJUST_BIT, &ct->status)) {
- DEBUGP("nf_nat_standalone: adjusting sequence number\n");
+ pr_debug("nf_nat_standalone: adjusting sequence number\n");
if (!nf_nat_seq_adjust(pskb, ct, ctinfo))
return NF_DROP;
}
static int __init nf_nat_standalone_init(void)
{
- int size, ret = 0;
+ int ret = 0;
need_conntrack();
- size = ALIGN(sizeof(struct nf_conn), __alignof__(struct nf_conn_nat)) +
- sizeof(struct nf_conn_nat);
- ret = nf_conntrack_register_cache(NF_CT_F_NAT, "nf_nat:base", size);
- if (ret < 0) {
- printk(KERN_ERR "nf_nat_init: Unable to create slab cache\n");
- return ret;
- }
-
- size = ALIGN(size, __alignof__(struct nf_conn_help)) +
- sizeof(struct nf_conn_help);
- ret = nf_conntrack_register_cache(NF_CT_F_NAT|NF_CT_F_HELP,
- "nf_nat:help", size);
- if (ret < 0) {
- printk(KERN_ERR "nf_nat_init: Unable to create slab cache\n");
- goto cleanup_register_cache;
- }
#ifdef CONFIG_XFRM
BUG_ON(ip_nat_decode_session != NULL);
ip_nat_decode_session = nat_decode_session;
printk("nf_nat_init: can't register hooks.\n");
goto cleanup_rule_init;
}
- nf_nat_module_is_loaded = 1;
return ret;
cleanup_rule_init:
ip_nat_decode_session = NULL;
synchronize_net();
#endif
- nf_conntrack_unregister_cache(NF_CT_F_NAT|NF_CT_F_HELP);
- cleanup_register_cache:
- nf_conntrack_unregister_cache(NF_CT_F_NAT);
return ret;
}
{
nf_unregister_hooks(nf_nat_ops, ARRAY_SIZE(nf_nat_ops));
nf_nat_rule_cleanup();
- nf_nat_module_is_loaded = 0;
#ifdef CONFIG_XFRM
ip_nat_decode_session = NULL;
synchronize_net();
= ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.udp.port;
exp->dir = IP_CT_DIR_REPLY;
exp->expectfn = nf_nat_follow_master;
- if (nf_conntrack_expect_related(exp) != 0)
+ if (nf_ct_expect_related(exp) != 0)
return NF_DROP;
return NF_ACCEPT;
}
#include <net/tcp.h>
#include <net/icmp.h>
#include <net/xfrm.h>
-#include <net/ip_mp_alg.h>
#include <net/netevent.h>
#include <net/rtnetlink.h>
#ifdef CONFIG_SYSCTL
#define ECN_OR_COST(class) TC_PRIO_##class
-__u8 ip_tos2prio[16] = {
+const __u8 ip_tos2prio[16] = {
TC_PRIO_BESTEFFORT,
ECN_OR_COST(FILLER),
TC_PRIO_BESTEFFORT,
static __inline__ void rt_free(struct rtable *rt)
{
- multipath_remove(rt);
call_rcu_bh(&rt->u.dst.rcu_head, dst_rcu_free);
}
static __inline__ void rt_drop(struct rtable *rt)
{
- multipath_remove(rt);
ip_rt_put(rt);
call_rcu_bh(&rt->u.dst.rcu_head, dst_rcu_free);
}
(fl1->iif ^ fl2->iif)) == 0;
}
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
-static struct rtable **rt_remove_balanced_route(struct rtable **chain_head,
- struct rtable *expentry,
- int *removed_count)
-{
- int passedexpired = 0;
- struct rtable **nextstep = NULL;
- struct rtable **rthp = chain_head;
- struct rtable *rth;
-
- if (removed_count)
- *removed_count = 0;
-
- while ((rth = *rthp) != NULL) {
- if (rth == expentry)
- passedexpired = 1;
-
- if (((*rthp)->u.dst.flags & DST_BALANCED) != 0 &&
- compare_keys(&(*rthp)->fl, &expentry->fl)) {
- if (*rthp == expentry) {
- *rthp = rth->u.dst.rt_next;
- continue;
- } else {
- *rthp = rth->u.dst.rt_next;
- rt_free(rth);
- if (removed_count)
- ++(*removed_count);
- }
- } else {
- if (!((*rthp)->u.dst.flags & DST_BALANCED) &&
- passedexpired && !nextstep)
- nextstep = &rth->u.dst.rt_next;
-
- rthp = &rth->u.dst.rt_next;
- }
- }
-
- rt_free(expentry);
- if (removed_count)
- ++(*removed_count);
-
- return nextstep;
-}
-#endif /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
-
-
/* This runs via a timer and thus is always in BH context. */
static void rt_check_expire(unsigned long dummy)
{
}
/* Cleanup aged off entries. */
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- /* remove all related balanced entries if necessary */
- if (rth->u.dst.flags & DST_BALANCED) {
- rthp = rt_remove_balanced_route(
- &rt_hash_table[i].chain,
- rth, NULL);
- if (!rthp)
- break;
- } else {
- *rthp = rth->u.dst.rt_next;
- rt_free(rth);
- }
-#else /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
*rthp = rth->u.dst.rt_next;
rt_free(rth);
-#endif /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
}
spin_unlock(rt_hash_lock_addr(i));
if (delay < 0)
delay = ip_rt_min_delay;
- /* flush existing multipath state*/
- multipath_flush();
-
spin_lock_bh(&rt_flush_lock);
if (del_timer(&rt_flush_timer) && delay > 0 && rt_deadline) {
rthp = &rth->u.dst.rt_next;
continue;
}
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- /* remove all related balanced entries
- * if necessary
- */
- if (rth->u.dst.flags & DST_BALANCED) {
- int r;
-
- rthp = rt_remove_balanced_route(
- &rt_hash_table[k].chain,
- rth,
- &r);
- goal -= r;
- if (!rthp)
- break;
- } else {
- *rthp = rth->u.dst.rt_next;
- rt_free(rth);
- goal--;
- }
-#else /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
*rthp = rth->u.dst.rt_next;
rt_free(rth);
goal--;
-#endif /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
}
spin_unlock_bh(rt_hash_lock_addr(k));
if (goal <= 0)
spin_lock_bh(rt_hash_lock_addr(hash));
while ((rth = *rthp) != NULL) {
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- if (!(rth->u.dst.flags & DST_BALANCED) &&
- compare_keys(&rth->fl, &rt->fl)) {
-#else
if (compare_keys(&rth->fl, &rt->fl)) {
-#endif
/* Put it first */
*rthp = rth->u.dst.rt_next;
/*
atomic_set(&rth->u.dst.__refcnt, 1);
rth->u.dst.flags= DST_HOST;
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- if (res->fi->fib_nhs > 1)
- rth->u.dst.flags |= DST_BALANCED;
-#endif
if (IN_DEV_CONF_GET(in_dev, NOPOLICY))
rth->u.dst.flags |= DST_NOPOLICY;
if (IN_DEV_CONF_GET(out_dev, NOXFRM))
return err;
}
-static inline int ip_mkroute_input_def(struct sk_buff *skb,
- struct fib_result* res,
- const struct flowi *fl,
- struct in_device *in_dev,
- __be32 daddr, __be32 saddr, u32 tos)
+static inline int ip_mkroute_input(struct sk_buff *skb,
+ struct fib_result* res,
+ const struct flowi *fl,
+ struct in_device *in_dev,
+ __be32 daddr, __be32 saddr, u32 tos)
{
struct rtable* rth = NULL;
int err;
return rt_intern_hash(hash, rth, (struct rtable**)&skb->dst);
}
-static inline int ip_mkroute_input(struct sk_buff *skb,
- struct fib_result* res,
- const struct flowi *fl,
- struct in_device *in_dev,
- __be32 daddr, __be32 saddr, u32 tos)
-{
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- struct rtable* rth = NULL, *rtres;
- unsigned char hop, hopcount;
- int err = -EINVAL;
- unsigned int hash;
-
- if (res->fi)
- hopcount = res->fi->fib_nhs;
- else
- hopcount = 1;
-
- /* distinguish between multipath and singlepath */
- if (hopcount < 2)
- return ip_mkroute_input_def(skb, res, fl, in_dev, daddr,
- saddr, tos);
-
- /* add all alternatives to the routing cache */
- for (hop = 0; hop < hopcount; hop++) {
- res->nh_sel = hop;
-
- /* put reference to previous result */
- if (hop)
- ip_rt_put(rtres);
-
- /* create a routing cache entry */
- err = __mkroute_input(skb, res, in_dev, daddr, saddr, tos,
- &rth);
- if (err)
- return err;
-
- /* put it into the cache */
- hash = rt_hash(daddr, saddr, fl->iif);
- err = rt_intern_hash(hash, rth, &rtres);
- if (err)
- return err;
-
- /* forward hop information to multipath impl. */
- multipath_set_nhinfo(rth,
- FIB_RES_NETWORK(*res),
- FIB_RES_NETMASK(*res),
- res->prefixlen,
- &FIB_RES_NH(*res));
- }
- skb->dst = &rtres->u.dst;
- return err;
-#else /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
- return ip_mkroute_input_def(skb, res, fl, in_dev, daddr, saddr, tos);
-#endif /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
-}
-
-
/*
* NOTE. We drop all the packets that has local source
* addresses, because every properly looped back packet
atomic_set(&rth->u.dst.__refcnt, 1);
rth->u.dst.flags= DST_HOST;
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- if (res->fi) {
- rth->rt_multipath_alg = res->fi->fib_mp_alg;
- if (res->fi->fib_nhs > 1)
- rth->u.dst.flags |= DST_BALANCED;
- }
-#endif
if (IN_DEV_CONF_GET(in_dev, NOXFRM))
rth->u.dst.flags |= DST_NOXFRM;
if (IN_DEV_CONF_GET(in_dev, NOPOLICY))
return err;
}
-static inline int ip_mkroute_output_def(struct rtable **rp,
- struct fib_result* res,
- const struct flowi *fl,
- const struct flowi *oldflp,
- struct net_device *dev_out,
- unsigned flags)
+static inline int ip_mkroute_output(struct rtable **rp,
+ struct fib_result* res,
+ const struct flowi *fl,
+ const struct flowi *oldflp,
+ struct net_device *dev_out,
+ unsigned flags)
{
struct rtable *rth = NULL;
int err = __mkroute_output(&rth, res, fl, oldflp, dev_out, flags);
return err;
}
-static inline int ip_mkroute_output(struct rtable** rp,
- struct fib_result* res,
- const struct flowi *fl,
- const struct flowi *oldflp,
- struct net_device *dev_out,
- unsigned flags)
-{
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- unsigned char hop;
- unsigned hash;
- int err = -EINVAL;
- struct rtable *rth = NULL;
-
- if (res->fi && res->fi->fib_nhs > 1) {
- unsigned char hopcount = res->fi->fib_nhs;
-
- for (hop = 0; hop < hopcount; hop++) {
- struct net_device *dev2nexthop;
-
- res->nh_sel = hop;
-
- /* hold a work reference to the output device */
- dev2nexthop = FIB_RES_DEV(*res);
- dev_hold(dev2nexthop);
-
- /* put reference to previous result */
- if (hop)
- ip_rt_put(*rp);
-
- err = __mkroute_output(&rth, res, fl, oldflp,
- dev2nexthop, flags);
-
- if (err != 0)
- goto cleanup;
-
- hash = rt_hash(oldflp->fl4_dst, oldflp->fl4_src,
- oldflp->oif);
- err = rt_intern_hash(hash, rth, rp);
-
- /* forward hop information to multipath impl. */
- multipath_set_nhinfo(rth,
- FIB_RES_NETWORK(*res),
- FIB_RES_NETMASK(*res),
- res->prefixlen,
- &FIB_RES_NH(*res));
- cleanup:
- /* release work reference to output device */
- dev_put(dev2nexthop);
-
- if (err != 0)
- return err;
- }
- return err;
- } else {
- return ip_mkroute_output_def(rp, res, fl, oldflp, dev_out,
- flags);
- }
-#else /* CONFIG_IP_ROUTE_MULTIPATH_CACHED */
- return ip_mkroute_output_def(rp, res, fl, oldflp, dev_out, flags);
-#endif
-}
-
/*
* Major route resolver routine.
*/
rth->fl.mark == flp->mark &&
!((rth->fl.fl4_tos ^ flp->fl4_tos) &
(IPTOS_RT_MASK | RTO_ONLINK))) {
-
- /* check for multipath routes and choose one if
- * necessary
- */
- if (multipath_select_route(flp, rth, rp)) {
- dst_hold(&(*rp)->u.dst);
- RT_CACHE_STAT_INC(out_hit);
- rcu_read_unlock_bh();
- return 0;
- }
-
rth->u.dst.lastuse = jiffies;
dst_hold(&rth->u.dst);
rth->u.dst.__use++;
#ifdef CONFIG_NET_CLS_ROUTE
if (rt->u.dst.tclassid)
NLA_PUT_U32(skb, RTA_FLOW, rt->u.dst.tclassid);
-#endif
-#ifdef CONFIG_IP_ROUTE_MULTIPATH_CACHED
- if (rt->rt_multipath_alg != IP_MP_ALG_NONE)
- NLA_PUT_U32(skb, RTA_MP_ALGO, rt->rt_multipath_alg);
#endif
if (rt->fl.iif)
NLA_PUT_BE32(skb, RTA_PREFSRC, rt->rt_spec_dst);
struct hlist_node *node;
struct inet_timewait_sock *tw;
- /* We can reschedule _before_ having picked the target: */
- cond_resched_softirq();
-
- read_lock(&tcp_hashinfo.ehash[st->bucket].lock);
+ read_lock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
sk_for_each(sk, node, &tcp_hashinfo.ehash[st->bucket].chain) {
if (sk->sk_family != st->family) {
continue;
rc = tw;
goto out;
}
- read_unlock(&tcp_hashinfo.ehash[st->bucket].lock);
+ read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
st->state = TCP_SEQ_STATE_ESTABLISHED;
}
out:
cur = tw;
goto out;
}
- read_unlock(&tcp_hashinfo.ehash[st->bucket].lock);
+ read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
st->state = TCP_SEQ_STATE_ESTABLISHED;
- /* We can reschedule between buckets: */
- cond_resched_softirq();
-
if (++st->bucket < tcp_hashinfo.ehash_size) {
- read_lock(&tcp_hashinfo.ehash[st->bucket].lock);
+ read_lock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
sk = sk_head(&tcp_hashinfo.ehash[st->bucket].chain);
} else {
cur = NULL;
if (!rc) {
inet_listen_unlock(&tcp_hashinfo);
- local_bh_disable();
st->state = TCP_SEQ_STATE_ESTABLISHED;
rc = established_get_idx(seq, pos);
}
rc = listening_get_next(seq, v);
if (!rc) {
inet_listen_unlock(&tcp_hashinfo);
- local_bh_disable();
st->state = TCP_SEQ_STATE_ESTABLISHED;
rc = established_get_first(seq);
}
case TCP_SEQ_STATE_TIME_WAIT:
case TCP_SEQ_STATE_ESTABLISHED:
if (v)
- read_unlock(&tcp_hashinfo.ehash[st->bucket].lock);
- local_bh_enable();
+ read_unlock_bh(&tcp_hashinfo.ehash[st->bucket].lock);
break;
}
}
tp->fackets_out -= diff;
if ((int)tp->fackets_out < 0)
tp->fackets_out = 0;
+ /* SACK fastpath might overwrite it unless dealt with */
+ if (tp->fastpath_skb_hint != NULL &&
+ after(TCP_SKB_CB(tp->fastpath_skb_hint)->seq,
+ TCP_SKB_CB(skb)->seq)) {
+ tp->fastpath_cnt_hint -= diff;
+ if ((int)tp->fastpath_cnt_hint < 0)
+ tp->fastpath_cnt_hint = 0;
+ }
}
}
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
#include <linux/tcp.h>
#include <linux/proc_fs.h>
#include <linux/module.h>
-#include <linux/kfifo.h>
#include <linux/ktime.h>
#include <linux/time.h>
-#include <linux/vmalloc.h>
#include <net/tcp.h>
MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>");
MODULE_DESCRIPTION("TCP cwnd snooper");
MODULE_LICENSE("GPL");
+MODULE_VERSION("1.1");
static int port __read_mostly = 0;
MODULE_PARM_DESC(port, "Port to match (0=all)");
module_param(port, int, 0);
-static int bufsize __read_mostly = 64*1024;
-MODULE_PARM_DESC(bufsize, "Log buffer size (default 64k)");
+static int bufsize __read_mostly = 4096;
+MODULE_PARM_DESC(bufsize, "Log buffer size in packets (4096)");
module_param(bufsize, int, 0);
static int full __read_mostly;
static const char procname[] = "tcpprobe";
-struct {
- struct kfifo *fifo;
+struct tcp_log {
+ ktime_t tstamp;
+ __be32 saddr, daddr;
+ __be16 sport, dport;
+ u16 length;
+ u32 snd_nxt;
+ u32 snd_una;
+ u32 snd_wnd;
+ u32 snd_cwnd;
+ u32 ssthresh;
+ u32 srtt;
+};
+
+static struct {
spinlock_t lock;
wait_queue_head_t wait;
ktime_t start;
u32 lastcwnd;
-} tcpw;
-/*
- * Print to log with timestamps.
- * FIXME: causes an extra copy
- */
-static void printl(const char *fmt, ...)
- __attribute__ ((format (printf, 1, 2)));
+ unsigned long head, tail;
+ struct tcp_log *log;
+} tcp_probe;
+
-static void printl(const char *fmt, ...)
+static inline int tcp_probe_used(void)
{
- va_list args;
- int len;
- struct timespec tv;
- char tbuf[256];
-
- va_start(args, fmt);
- /* want monotonic time since start of tcp_probe */
- tv = ktime_to_timespec(ktime_sub(ktime_get(), tcpw.start));
-
- len = sprintf(tbuf, "%lu.%09lu ",
- (unsigned long) tv.tv_sec, (unsigned long) tv.tv_nsec);
- len += vscnprintf(tbuf+len, sizeof(tbuf)-len, fmt, args);
- va_end(args);
-
- kfifo_put(tcpw.fifo, tbuf, len);
- wake_up(&tcpw.wait);
+ return (tcp_probe.head - tcp_probe.tail) % bufsize;
+}
+
+static inline int tcp_probe_avail(void)
+{
+ return bufsize - tcp_probe_used();
}
/*
/* Only update if port matches */
if ((port == 0 || ntohs(inet->dport) == port || ntohs(inet->sport) == port)
- && (full || tp->snd_cwnd != tcpw.lastcwnd)) {
- printl("%d.%d.%d.%d:%u %d.%d.%d.%d:%u %d %#x %#x %u %u %u %u\n",
- NIPQUAD(inet->saddr), ntohs(inet->sport),
- NIPQUAD(inet->daddr), ntohs(inet->dport),
- skb->len, tp->snd_nxt, tp->snd_una,
- tp->snd_cwnd, tcp_current_ssthresh(sk),
- tp->snd_wnd, tp->srtt >> 3);
- tcpw.lastcwnd = tp->snd_cwnd;
+ && (full || tp->snd_cwnd != tcp_probe.lastcwnd)) {
+
+ spin_lock(&tcp_probe.lock);
+ /* If log fills, just silently drop */
+ if (tcp_probe_avail() > 1) {
+ struct tcp_log *p = tcp_probe.log + tcp_probe.head;
+
+ p->tstamp = ktime_get();
+ p->saddr = inet->saddr;
+ p->sport = inet->sport;
+ p->daddr = inet->daddr;
+ p->dport = inet->dport;
+ p->length = skb->len;
+ p->snd_nxt = tp->snd_nxt;
+ p->snd_una = tp->snd_una;
+ p->snd_cwnd = tp->snd_cwnd;
+ p->snd_wnd = tp->snd_wnd;
+ p->srtt = tp->srtt >> 3;
+
+ tcp_probe.head = (tcp_probe.head + 1) % bufsize;
+ }
+ tcp_probe.lastcwnd = tp->snd_cwnd;
+ spin_unlock(&tcp_probe.lock);
+
+ wake_up(&tcp_probe.wait);
}
jprobe_return();
return 0;
}
-static struct jprobe tcp_probe = {
+static struct jprobe tcp_jprobe = {
.kp = {
.symbol_name = "tcp_rcv_established",
},
.entry = JPROBE_ENTRY(jtcp_rcv_established),
};
-
static int tcpprobe_open(struct inode * inode, struct file * file)
{
- kfifo_reset(tcpw.fifo);
- tcpw.start = ktime_get();
+ /* Reset (empty) log */
+ spin_lock_bh(&tcp_probe.lock);
+ tcp_probe.head = tcp_probe.tail = 0;
+ tcp_probe.start = ktime_get();
+ spin_unlock_bh(&tcp_probe.lock);
+
return 0;
}
+static int tcpprobe_sprint(char *tbuf, int n)
+{
+ const struct tcp_log *p
+ = tcp_probe.log + tcp_probe.tail % bufsize;
+ struct timespec tv
+ = ktime_to_timespec(ktime_sub(p->tstamp, tcp_probe.start));
+
+ return snprintf(tbuf, n,
+ "%lu.%09lu %d.%d.%d.%d:%u %d.%d.%d.%d:%u"
+ " %d %#x %#x %u %u %u %u\n",
+ (unsigned long) tv.tv_sec,
+ (unsigned long) tv.tv_nsec,
+ NIPQUAD(p->saddr), ntohs(p->sport),
+ NIPQUAD(p->daddr), ntohs(p->dport),
+ p->length, p->snd_nxt, p->snd_una,
+ p->snd_cwnd, p->ssthresh, p->snd_wnd, p->srtt);
+}
+
static ssize_t tcpprobe_read(struct file *file, char __user *buf,
size_t len, loff_t *ppos)
{
int error = 0, cnt = 0;
- unsigned char *tbuf;
if (!buf || len < 0)
return -EINVAL;
- if (len == 0)
- return 0;
+ while (cnt < len) {
+ char tbuf[128];
+ int width;
+
+ /* Wait for data in buffer */
+ error = wait_event_interruptible(tcp_probe.wait,
+ tcp_probe_used() > 0);
+ if (error)
+ break;
- tbuf = vmalloc(len);
- if (!tbuf)
- return -ENOMEM;
+ spin_lock_bh(&tcp_probe.lock);
+ if (tcp_probe.head == tcp_probe.tail) {
+ /* multiple readers race? */
+ spin_unlock_bh(&tcp_probe.lock);
+ continue;
+ }
- error = wait_event_interruptible(tcpw.wait,
- __kfifo_len(tcpw.fifo) != 0);
- if (error)
- goto out_free;
+ width = tcpprobe_sprint(tbuf, sizeof(tbuf));
- cnt = kfifo_get(tcpw.fifo, tbuf, len);
- error = copy_to_user(buf, tbuf, cnt);
+ if (width < len)
+ tcp_probe.tail = (tcp_probe.tail + 1) % bufsize;
-out_free:
- vfree(tbuf);
+ spin_unlock_bh(&tcp_probe.lock);
+
+ /* if record greater than space available
+ return partial buffer (so far) */
+ if (width >= len)
+ break;
+
+ error = copy_to_user(buf + cnt, tbuf, width);
+ if (error)
+ break;
+ cnt += width;
+ }
- return error ? error : cnt;
+ return cnt == 0 ? error : cnt;
}
static const struct file_operations tcpprobe_fops = {
{
int ret = -ENOMEM;
- init_waitqueue_head(&tcpw.wait);
- spin_lock_init(&tcpw.lock);
- tcpw.fifo = kfifo_alloc(bufsize, GFP_KERNEL, &tcpw.lock);
- if (IS_ERR(tcpw.fifo))
- return PTR_ERR(tcpw.fifo);
+ init_waitqueue_head(&tcp_probe.wait);
+ spin_lock_init(&tcp_probe.lock);
+
+ if (bufsize < 0)
+ return -EINVAL;
+
+ tcp_probe.log = kcalloc(sizeof(struct tcp_log), bufsize, GFP_KERNEL);
+ if (!tcp_probe.log)
+ goto err0;
if (!proc_net_fops_create(procname, S_IRUSR, &tcpprobe_fops))
goto err0;
- ret = register_jprobe(&tcp_probe);
+ ret = register_jprobe(&tcp_jprobe);
if (ret)
goto err1;
- pr_info("TCP watch registered (port=%d)\n", port);
+ pr_info("TCP probe registered (port=%d)\n", port);
return 0;
err1:
proc_net_remove(procname);
err0:
- kfifo_free(tcpw.fifo);
+ kfree(tcp_probe.log);
return ret;
}
module_init(tcpprobe_init);
static __exit void tcpprobe_exit(void)
{
- kfifo_free(tcpw.fifo);
proc_net_remove(procname);
- unregister_jprobe(&tcp_probe);
-
+ unregister_jprobe(&tcp_jprobe);
+ kfree(tcp_probe.log);
}
module_exit(tcpprobe_exit);
* Alexey Kuznetsov: allow both IPv4 and IPv6 sockets to bind
* a single port at the same time.
* Derek Atkins <derek@ihtfp.com>: Add Encapulation Support
+ * James Chapman : Add L2TP encapsulation type.
*
*
* This program is free software; you can redistribute it and/or
return 0;
}
-/* return:
- * 1 if the UDP system should process it
- * 0 if we should drop this packet
- * -1 if it should get processed by xfrm4_rcv_encap
- */
-static int udp_encap_rcv(struct sock * sk, struct sk_buff *skb)
-{
-#ifndef CONFIG_XFRM
- return 1;
-#else
- struct udp_sock *up = udp_sk(sk);
- struct udphdr *uh;
- struct iphdr *iph;
- int iphlen, len;
-
- __u8 *udpdata;
- __be32 *udpdata32;
- __u16 encap_type = up->encap_type;
-
- /* if we're overly short, let UDP handle it */
- len = skb->len - sizeof(struct udphdr);
- if (len <= 0)
- return 1;
-
- /* if this is not encapsulated socket, then just return now */
- if (!encap_type)
- return 1;
-
- /* If this is a paged skb, make sure we pull up
- * whatever data we need to look at. */
- if (!pskb_may_pull(skb, sizeof(struct udphdr) + min(len, 8)))
- return 1;
-
- /* Now we can get the pointers */
- uh = udp_hdr(skb);
- udpdata = (__u8 *)uh + sizeof(struct udphdr);
- udpdata32 = (__be32 *)udpdata;
-
- switch (encap_type) {
- default:
- case UDP_ENCAP_ESPINUDP:
- /* Check if this is a keepalive packet. If so, eat it. */
- if (len == 1 && udpdata[0] == 0xff) {
- return 0;
- } else if (len > sizeof(struct ip_esp_hdr) && udpdata32[0] != 0) {
- /* ESP Packet without Non-ESP header */
- len = sizeof(struct udphdr);
- } else
- /* Must be an IKE packet.. pass it through */
- return 1;
- break;
- case UDP_ENCAP_ESPINUDP_NON_IKE:
- /* Check if this is a keepalive packet. If so, eat it. */
- if (len == 1 && udpdata[0] == 0xff) {
- return 0;
- } else if (len > 2 * sizeof(u32) + sizeof(struct ip_esp_hdr) &&
- udpdata32[0] == 0 && udpdata32[1] == 0) {
-
- /* ESP Packet with Non-IKE marker */
- len = sizeof(struct udphdr) + 2 * sizeof(u32);
- } else
- /* Must be an IKE packet.. pass it through */
- return 1;
- break;
- }
-
- /* At this point we are sure that this is an ESPinUDP packet,
- * so we need to remove 'len' bytes from the packet (the UDP
- * header and optional ESP marker bytes) and then modify the
- * protocol to ESP, and then call into the transform receiver.
- */
- if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
- return 0;
-
- /* Now we can update and verify the packet length... */
- iph = ip_hdr(skb);
- iphlen = iph->ihl << 2;
- iph->tot_len = htons(ntohs(iph->tot_len) - len);
- if (skb->len < iphlen + len) {
- /* packet is too small!?! */
- return 0;
- }
-
- /* pull the data buffer up to the ESP header and set the
- * transport header to point to ESP. Keep UDP on the stack
- * for later.
- */
- __skb_pull(skb, len);
- skb_reset_transport_header(skb);
-
- /* modify the protocol (it's ESP!) */
- iph->protocol = IPPROTO_ESP;
-
- /* and let the caller know to send this into the ESP processor... */
- return -1;
-#endif
-}
-
/* returns:
* -1: error
* 0: success
if (up->encap_type) {
/*
- * This is an encapsulation socket, so let's see if this is
- * an encapsulated packet.
- * If it's a keepalive packet, then just eat it.
- * If it's an encapsulateed packet, then pass it to the
- * IPsec xfrm input and return the response
- * appropriately. Otherwise, just fall through and
- * pass this up the UDP socket.
+ * This is an encapsulation socket so pass the skb to
+ * the socket's udp_encap_rcv() hook. Otherwise, just
+ * fall through and pass this up the UDP socket.
+ * up->encap_rcv() returns the following value:
+ * =0 if skb was successfully passed to the encap
+ * handler or was discarded by it.
+ * >0 if skb should be passed on to UDP.
+ * <0 if skb should be resubmitted as proto -N
*/
- int ret;
- ret = udp_encap_rcv(sk, skb);
- if (ret == 0) {
- /* Eat the packet .. */
- kfree_skb(skb);
- return 0;
- }
- if (ret < 0) {
- /* process the ESP packet */
- ret = xfrm4_rcv_encap(skb, up->encap_type);
- UDP_INC_STATS_BH(UDP_MIB_INDATAGRAMS, up->pcflag);
- return -ret;
+ /* if we're overly short, let UDP handle it */
+ if (skb->len > sizeof(struct udphdr) &&
+ up->encap_rcv != NULL) {
+ int ret;
+
+ ret = (*up->encap_rcv)(sk, skb);
+ if (ret <= 0) {
+ UDP_INC_STATS_BH(UDP_MIB_INDATAGRAMS, up->pcflag);
+ return -ret;
+ }
}
+
/* FALLTHROUGH -- it's a UDP Packet */
}
case 0:
case UDP_ENCAP_ESPINUDP:
case UDP_ENCAP_ESPINUDP_NON_IKE:
+ up->encap_rcv = xfrm4_udp_encap_rcv;
+ /* FALLTHROUGH */
+ case UDP_ENCAP_L2TPINUDP:
up->encap_type = val;
break;
default:
#include <net/ip.h>
#include <net/xfrm.h>
-int xfrm4_rcv(struct sk_buff *skb)
-{
- return xfrm4_rcv_encap(skb, 0);
-}
-
-EXPORT_SYMBOL(xfrm4_rcv);
-
static int xfrm4_parse_spi(struct sk_buff *skb, u8 nexthdr, __be32 *spi, __be32 *seq)
{
switch (nexthdr) {
}
#endif
-int xfrm4_rcv_encap(struct sk_buff *skb, __u16 encap_type)
+static int xfrm4_rcv_encap(struct sk_buff *skb, __u16 encap_type)
{
__be32 spi, seq;
struct xfrm_state *xfrm_vec[XFRM_MAX_DEPTH];
kfree_skb(skb);
return 0;
}
+
+/* If it's a keepalive packet, then just eat it.
+ * If it's an encapsulated packet, then pass it to the
+ * IPsec xfrm input.
+ * Returns 0 if skb passed to xfrm or was dropped.
+ * Returns >0 if skb should be passed to UDP.
+ * Returns <0 if skb should be resubmitted (-ret is protocol)
+ */
+int xfrm4_udp_encap_rcv(struct sock *sk, struct sk_buff *skb)
+{
+ struct udp_sock *up = udp_sk(sk);
+ struct udphdr *uh;
+ struct iphdr *iph;
+ int iphlen, len;
+ int ret;
+
+ __u8 *udpdata;
+ __be32 *udpdata32;
+ __u16 encap_type = up->encap_type;
+
+ /* if this is not encapsulated socket, then just return now */
+ if (!encap_type)
+ return 1;
+
+ /* If this is a paged skb, make sure we pull up
+ * whatever data we need to look at. */
+ len = skb->len - sizeof(struct udphdr);
+ if (!pskb_may_pull(skb, sizeof(struct udphdr) + min(len, 8)))
+ return 1;
+
+ /* Now we can get the pointers */
+ uh = udp_hdr(skb);
+ udpdata = (__u8 *)uh + sizeof(struct udphdr);
+ udpdata32 = (__be32 *)udpdata;
+
+ switch (encap_type) {
+ default:
+ case UDP_ENCAP_ESPINUDP:
+ /* Check if this is a keepalive packet. If so, eat it. */
+ if (len == 1 && udpdata[0] == 0xff) {
+ goto drop;
+ } else if (len > sizeof(struct ip_esp_hdr) && udpdata32[0] != 0) {
+ /* ESP Packet without Non-ESP header */
+ len = sizeof(struct udphdr);
+ } else
+ /* Must be an IKE packet.. pass it through */
+ return 1;
+ break;
+ case UDP_ENCAP_ESPINUDP_NON_IKE:
+ /* Check if this is a keepalive packet. If so, eat it. */
+ if (len == 1 && udpdata[0] == 0xff) {
+ goto drop;
+ } else if (len > 2 * sizeof(u32) + sizeof(struct ip_esp_hdr) &&
+ udpdata32[0] == 0 && udpdata32[1] == 0) {
+
+ /* ESP Packet with Non-IKE marker */
+ len = sizeof(struct udphdr) + 2 * sizeof(u32);
+ } else
+ /* Must be an IKE packet.. pass it through */
+ return 1;
+ break;
+ }
+
+ /* At this point we are sure that this is an ESPinUDP packet,
+ * so we need to remove 'len' bytes from the packet (the UDP
+ * header and optional ESP marker bytes) and then modify the
+ * protocol to ESP, and then call into the transform receiver.
+ */
+ if (skb_cloned(skb) && pskb_expand_head(skb, 0, 0, GFP_ATOMIC))
+ goto drop;
+
+ /* Now we can update and verify the packet length... */
+ iph = ip_hdr(skb);
+ iphlen = iph->ihl << 2;
+ iph->tot_len = htons(ntohs(iph->tot_len) - len);
+ if (skb->len < iphlen + len) {
+ /* packet is too small!?! */
+ goto drop;
+ }
+
+ /* pull the data buffer up to the ESP header and set the
+ * transport header to point to ESP. Keep UDP on the stack
+ * for later.
+ */
+ __skb_pull(skb, len);
+ skb_reset_transport_header(skb);
+
+ /* modify the protocol (it's ESP!) */
+ iph->protocol = IPPROTO_ESP;
+
+ /* process ESP */
+ ret = xfrm4_rcv_encap(skb, encap_type);
+ return ret;
+
+drop:
+ kfree_skb(skb);
+ return 0;
+}
+
+int xfrm4_rcv(struct sk_buff *skb)
+{
+ return xfrm4_rcv_encap(skb, 0);
+}
+
+EXPORT_SYMBOL(xfrm4_rcv);
module_init(ipip_init);
module_exit(ipip_fini);
MODULE_LICENSE("GPL");
+MODULE_ALIAS_XFRM_TYPE(AF_INET, XFRM_PROTO_IPIP);
If unsure, say Y.
config IPV6_MIP6
- bool "IPv6: Mobility (EXPERIMENTAL)"
+ tristate "IPv6: Mobility (EXPERIMENTAL)"
depends on IPV6 && EXPERIMENTAL
select XFRM
---help---
xfrm6_output.o
ipv6-$(CONFIG_NETFILTER) += netfilter.o
ipv6-$(CONFIG_IPV6_MULTIPLE_TABLES) += fib6_rules.o
-ipv6-$(CONFIG_IPV6_MIP6) += mip6.o
ipv6-$(CONFIG_PROC_FS) += proc.o
ipv6-objs += $(ipv6-y)
obj-$(CONFIG_INET6_XFRM_MODE_TUNNEL) += xfrm6_mode_tunnel.o
obj-$(CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION) += xfrm6_mode_ro.o
obj-$(CONFIG_INET6_XFRM_MODE_BEET) += xfrm6_mode_beet.o
+obj-$(CONFIG_IPV6_MIP6) += mip6.o
obj-$(CONFIG_NETFILTER) += netfilter/
obj-$(CONFIG_IPV6_SIT) += sit.o
}
/* Rule 4: Prefer home address */
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
if (hiscore.rule < 4) {
if (ifa_result->flags & IFA_F_HOMEADDRESS)
hiscore.attrs |= IPV6_SADDR_SCORE_HOA;
return 0;
}
-static struct seq_operations if6_seq_ops = {
+static const struct seq_operations if6_seq_ops = {
.start = if6_seq_start,
.next = if6_seq_next,
.show = if6_seq_show,
}
#endif /* CONFIG_PROC_FS */
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
/* Check if address is a home address configured on any interface. */
int ipv6_chk_home_addr(struct in6_addr *addr)
{
void __exit addrconf_cleanup(void)
{
struct net_device *dev;
- struct inet6_dev *idev;
struct inet6_ifaddr *ifa;
int i;
*/
for_each_netdev(dev) {
- if ((idev = __in6_dev_get(dev)) == NULL)
+ if (__in6_dev_get(dev) == NULL)
continue;
addrconf_ifdown(dev, 1);
}
#ifdef CONFIG_IPV6_TUNNEL
#include <net/ip6_tunnel.h>
#endif
-#ifdef CONFIG_IPV6_MIP6
-#include <net/mip6.h>
-#endif
#include <asm/uaccess.h>
#include <asm/system.h>
ipv6_frag_init();
ipv6_nodata_init();
ipv6_destopt_init();
-#ifdef CONFIG_IPV6_MIP6
- mip6_init();
-#endif
/* Init v6 transport protocols. */
udpv6_init();
/* Cleanup code parts. */
ipv6_packet_cleanup();
-#ifdef CONFIG_IPV6_MIP6
- mip6_fini();
-#endif
+
addrconf_cleanup();
ip6_flowlabel_cleanup();
ip6_route_cleanup();
return 0;
}
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
/**
* ipv6_rearrange_destopt - rearrange IPv6 destination options header
* @iph: IPv6 header
bad:
return;
}
+#else
+static void ipv6_rearrange_destopt(struct ipv6hdr *iph, struct ipv6_opt_hdr *destopt) {}
#endif
/**
while (exthdr.raw < end) {
switch (nexthdr) {
case NEXTHDR_DEST:
-#ifdef CONFIG_IPV6_MIP6
if (dir == XFRM_POLICY_OUT)
ipv6_rearrange_destopt(iph, exthdr.opth);
-#endif
case NEXTHDR_HOP:
if (!zero_out_mutable_opts(exthdr.opth)) {
LIMIT_NETDEBUG(
u8 nexthdr;
char tmp_base[8];
struct {
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
struct in6_addr saddr;
#endif
struct in6_addr daddr;
err = -ENOMEM;
goto error;
}
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
memcpy(tmp_ext, &top_iph->saddr, extlen);
#else
memcpy(tmp_ext, &top_iph->daddr, extlen);
memcpy(top_iph, tmp_base, sizeof(tmp_base));
if (tmp_ext) {
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
memcpy(&top_iph->saddr, tmp_ext, extlen);
#else
memcpy(&top_iph->daddr, tmp_ext, extlen);
module_exit(ah6_fini);
MODULE_LICENSE("GPL");
+MODULE_ALIAS_XFRM_TYPE(AF_INET6, XFRM_PROTO_AH);
return 0;
}
-static struct seq_operations ac6_seq_ops = {
+static const struct seq_operations ac6_seq_ops = {
.start = ac6_seq_start,
.next = ac6_seq_next,
.stop = ac6_seq_stop,
rthdr = (struct ipv6_rt_hdr *)CMSG_DATA(cmsg);
switch (rthdr->type) {
- case IPV6_SRCRT_TYPE_0:
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPV6_SRCRT_TYPE_2:
-#endif
break;
+#endif
default:
err = -EINVAL;
goto exit_f;
module_exit(esp6_fini);
MODULE_LICENSE("GPL");
+MODULE_ALIAS_XFRM_TYPE(AF_INET6, XFRM_PROTO_ESP);
#include <net/ndisc.h>
#include <net/ip6_route.h>
#include <net/addrconf.h>
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
#include <net/xfrm.h>
#endif
bad:
return -1;
}
+EXPORT_SYMBOL_GPL(ipv6_find_tlv);
/*
* Parsing tlv encoded headers.
Destination options header.
*****************************/
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
static int ipv6_dest_hao(struct sk_buff **skbp, int optoff)
{
struct sk_buff *skb = *skbp;
#endif
static struct tlvtype_proc tlvprocdestopt_lst[] = {
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
{
.type = IPV6_TLV_HAO,
.func = ipv6_dest_hao,
{
struct sk_buff *skb = *skbp;
struct inet6_skb_parm *opt = IP6CB(skb);
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
__u16 dstbuf;
#endif
struct dst_entry *dst;
}
opt->lastopt = opt->dst1 = skb_network_header_len(skb);
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
dstbuf = opt->dst1;
#endif
skb = *skbp;
skb->transport_header += (skb_transport_header(skb)[1] + 1) << 3;
opt = IP6CB(skb);
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
opt->nhoff = dstbuf;
#else
opt->nhoff = opt->dst1;
struct rt0_hdr *rthdr;
int accept_source_route = ipv6_devconf.accept_source_route;
- if (accept_source_route < 0 ||
- ((idev = in6_dev_get(skb->dev)) == NULL)) {
- kfree_skb(skb);
- return -1;
- }
- if (idev->cnf.accept_source_route < 0) {
+ idev = in6_dev_get(skb->dev);
+ if (idev) {
+ if (accept_source_route > idev->cnf.accept_source_route)
+ accept_source_route = idev->cnf.accept_source_route;
in6_dev_put(idev);
- kfree_skb(skb);
- return -1;
}
- if (accept_source_route > idev->cnf.accept_source_route)
- accept_source_route = idev->cnf.accept_source_route;
-
- in6_dev_put(idev);
-
if (!pskb_may_pull(skb, skb_transport_offset(skb) + 8) ||
!pskb_may_pull(skb, (skb_transport_offset(skb) +
((skb_transport_header(skb)[1] + 1) << 3)))) {
hdr = (struct ipv6_rt_hdr *)skb_transport_header(skb);
- switch (hdr->type) {
-#ifdef CONFIG_IPV6_MIP6
- case IPV6_SRCRT_TYPE_2:
- break;
-#endif
- case IPV6_SRCRT_TYPE_0:
- if (accept_source_route > 0)
- break;
- kfree_skb(skb);
- return -1;
- default:
- IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
- IPSTATS_MIB_INHDRERRORS);
- icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
- (&hdr->type) - skb_network_header(skb));
- return -1;
- }
-
if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr) ||
skb->pkt_type != PACKET_HOST) {
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
looped_back:
if (hdr->segments_left == 0) {
switch (hdr->type) {
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPV6_SRCRT_TYPE_2:
/* Silently discard type 2 header unless it was
* processed by own
}
switch (hdr->type) {
- case IPV6_SRCRT_TYPE_0:
- if (hdr->hdrlen & 0x01) {
- IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
- IPSTATS_MIB_INHDRERRORS);
- icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
- ((&hdr->hdrlen) -
- skb_network_header(skb)));
- return -1;
- }
- break;
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPV6_SRCRT_TYPE_2:
+ if (accept_source_route < 0)
+ goto unknown_rh;
/* Silently discard invalid RTH type 2 */
if (hdr->hdrlen != 2 || hdr->segments_left != 1) {
IP6_INC_STATS_BH(ip6_dst_idev(skb->dst),
}
break;
#endif
+ default:
+ goto unknown_rh;
}
/*
addr += i - 1;
switch (hdr->type) {
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPV6_SRCRT_TYPE_2:
if (xfrm6_input_addr(skb, (xfrm_address_t *)addr,
(xfrm_address_t *)&ipv6_hdr(skb)->saddr,
skb_push(skb, skb->data - skb_network_header(skb));
dst_input(skb);
return -1;
+
+unknown_rh:
+ IP6_INC_STATS_BH(ip6_dst_idev(skb->dst), IPSTATS_MIB_INHDRERRORS);
+ icmpv6_param_prob(skb, ICMPV6_HDR_FIELD,
+ (&hdr->type) - skb_network_header(skb));
+ return -1;
}
static struct inet6_protocol rthdr_protocol = {
printk(KERN_ERR "ipv6_rthdr_init: Could not register protocol\n");
};
-/*
- This function inverts received rthdr.
- NOTE: specs allow to make it automatically only if
- packet authenticated.
-
- I will not discuss it here (though, I am really pissed off at
- this stupid requirement making rthdr idea useless)
-
- Actually, it creates severe problems for us.
- Embryonic requests has no associated sockets,
- so that user have no control over it and
- cannot not only to set reply options, but
- even to know, that someone wants to connect
- without success. :-(
-
- For now we need to test the engine, so that I created
- temporary (or permanent) backdoor.
- If listening socket set IPV6_RTHDR to 2, then we invert header.
- --ANK (980729)
- */
-
-struct ipv6_txoptions *
-ipv6_invert_rthdr(struct sock *sk, struct ipv6_rt_hdr *hdr)
-{
- /* Received rthdr:
-
- [ H1 -> H2 -> ... H_prev ] daddr=ME
-
- Inverted result:
- [ H_prev -> ... -> H1 ] daddr =sender
-
- Note, that IP output engine will rewrite this rthdr
- by rotating it left by one addr.
- */
-
- int n, i;
- struct rt0_hdr *rthdr = (struct rt0_hdr*)hdr;
- struct rt0_hdr *irthdr;
- struct ipv6_txoptions *opt;
- int hdrlen = ipv6_optlen(hdr);
-
- if (hdr->segments_left ||
- hdr->type != IPV6_SRCRT_TYPE_0 ||
- hdr->hdrlen & 0x01)
- return NULL;
-
- n = hdr->hdrlen >> 1;
- opt = sock_kmalloc(sk, sizeof(*opt) + hdrlen, GFP_ATOMIC);
- if (opt == NULL)
- return NULL;
- memset(opt, 0, sizeof(*opt));
- opt->tot_len = sizeof(*opt) + hdrlen;
- opt->srcrt = (void*)(opt+1);
- opt->opt_nflen = hdrlen;
-
- memcpy(opt->srcrt, hdr, sizeof(*hdr));
- irthdr = (struct rt0_hdr*)opt->srcrt;
- irthdr->reserved = 0;
- opt->srcrt->segments_left = n;
- for (i=0; i<n; i++)
- memcpy(irthdr->addr+i, rthdr->addr+(n-1-i), 16);
- return opt;
-}
-
-EXPORT_SYMBOL_GPL(ipv6_invert_rthdr);
-
/**********************************
Hop-by-hop options.
**********************************/
return 0;
}
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
static void mip6_addr_swap(struct sk_buff *skb)
{
struct ipv6hdr *iph = ipv6_hdr(skb);
return 0;
}
-static struct seq_operations ip6fl_seq_ops = {
+static const struct seq_operations ip6fl_seq_ops = {
.start = ip6fl_seq_start,
.next = ip6fl_seq_next,
.stop = ip6fl_seq_stop,
to->tc_index = from->tc_index;
#endif
nf_copy(to, from);
+#if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+ defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
+ to->nf_trace = from->nf_trace;
+#endif
skb_copy_secmark(to, from);
}
found_rhdr = 1;
break;
case NEXTHDR_DEST:
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
if (ipv6_find_tlv(skb, offset, IPV6_TLV_HAO) >= 0)
break;
#endif
*/
max_headroom += LL_RESERVED_SPACE(tdev);
- if (skb_headroom(skb) < max_headroom ||
- skb_cloned(skb) || skb_shared(skb)) {
+ if (skb_headroom(skb) < max_headroom || skb_shared(skb) ||
+ (skb_cloned(skb) && !skb_clone_writable(skb, 0))) {
struct sk_buff *new_skb;
if (!(new_skb = skb_realloc_headroom(skb, max_headroom)))
MODULE_DESCRIPTION("IP Payload Compression Protocol (IPComp) for IPv6 - RFC3173");
MODULE_AUTHOR("Mitsuru KANDA <mk@linux-ipv6.org>");
-
+MODULE_ALIAS_XFRM_TYPE(AF_INET6, XFRM_PROTO_COMP);
struct ipv6hdr *ipv6h;
struct inet6_protocol *ops;
- if (!(features & NETIF_F_HW_CSUM))
+ if (!(features & NETIF_F_V6_CSUM))
features &= ~NETIF_F_SG;
if (unlikely(skb_shinfo(skb)->gso_type &
break;
case IPV6_RECVRTHDR:
- if (val < 0 || val > 2)
- goto e_inval;
- np->rxopt.bits.srcrt = val;
+ np->rxopt.bits.srcrt = valbool;
retv = 0;
break;
case IPV6_2292RTHDR:
- if (val < 0 || val > 2)
- goto e_inval;
- np->rxopt.bits.osrcrt = val;
+ np->rxopt.bits.osrcrt = valbool;
retv = 0;
break;
if (optname == IPV6_RTHDR && opt && opt->srcrt) {
struct ipv6_rt_hdr *rthdr = opt->srcrt;
switch (rthdr->type) {
- case IPV6_SRCRT_TYPE_0:
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPV6_SRCRT_TYPE_2:
-#endif
break;
+#endif
default:
goto sticky_done;
}
return 0;
}
-static struct seq_operations igmp6_mc_seq_ops = {
+static const struct seq_operations igmp6_mc_seq_ops = {
.start = igmp6_mc_seq_start,
.next = igmp6_mc_seq_next,
.stop = igmp6_mc_seq_stop,
return 0;
}
-static struct seq_operations igmp6_mcf_seq_ops = {
+static const struct seq_operations igmp6_mcf_seq_ops = {
.start = igmp6_mcf_seq_start,
.next = igmp6_mcf_seq_next,
.stop = igmp6_mcf_seq_stop,
#include <net/sock.h>
#include <net/ipv6.h>
#include <net/ip6_checksum.h>
+#include <net/rawv6.h>
#include <net/xfrm.h>
#include <net/mip6.h>
return len;
}
-int mip6_mh_filter(struct sock *sk, struct sk_buff *skb)
+static int mip6_mh_filter(struct sock *sk, struct sk_buff *skb)
{
struct ip6_mh *mh;
.remote_addr = mip6_xfrm_addr,
};
-int __init mip6_init(void)
+static int __init mip6_init(void)
{
printk(KERN_INFO "Mobile IPv6\n");
printk(KERN_INFO "%s: can't add xfrm type(rthdr)\n", __FUNCTION__);
goto mip6_rthdr_xfrm_fail;
}
+ if (rawv6_mh_filter_register(mip6_mh_filter) < 0) {
+ printk(KERN_INFO "%s: can't add rawv6 mh filter\n", __FUNCTION__);
+ goto mip6_rawv6_mh_fail;
+ }
+
+
return 0;
+ mip6_rawv6_mh_fail:
+ xfrm_unregister_type(&mip6_rthdr_type, AF_INET6);
mip6_rthdr_xfrm_fail:
xfrm_unregister_type(&mip6_destopt_type, AF_INET6);
mip6_destopt_xfrm_fail:
return -EAGAIN;
}
-void __exit mip6_fini(void)
+static void __exit mip6_fini(void)
{
+ if (rawv6_mh_filter_unregister(mip6_mh_filter) < 0)
+ printk(KERN_INFO "%s: can't remove rawv6 mh filter\n", __FUNCTION__);
if (xfrm_unregister_type(&mip6_rthdr_type, AF_INET6) < 0)
printk(KERN_INFO "%s: can't remove xfrm type(rthdr)\n", __FUNCTION__);
if (xfrm_unregister_type(&mip6_destopt_type, AF_INET6) < 0)
printk(KERN_INFO "%s: can't remove xfrm type(destopt)\n", __FUNCTION__);
}
+
+module_init(mip6_init);
+module_exit(mip6_fini);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_XFRM_TYPE(AF_INET6, XFRM_PROTO_DSTOPTS);
+MODULE_ALIAS_XFRM_TYPE(AF_INET6, XFRM_PROTO_ROUTING);
}
/* Returns whether matches rule or not. */
-static inline int
+static inline bool
ip6_packet_match(const struct sk_buff *skb,
const char *indev,
const char *outdev,
const struct ip6t_ip6 *ip6info,
unsigned int *protoff,
- int *fragoff, int *hotdrop)
+ int *fragoff, bool *hotdrop)
{
size_t i;
unsigned long ret;
dprintf("DST: %u. Mask: %u. Target: %u.%s\n", ip->daddr,
ipinfo->dmsk.s_addr, ipinfo->dst.s_addr,
ipinfo->invflags & IP6T_INV_DSTIP ? " (INV)" : "");*/
- return 0;
+ return false;
}
/* Look for ifname matches; this should unroll nicely. */
dprintf("VIA in mismatch (%s vs %s).%s\n",
indev, ip6info->iniface,
ip6info->invflags&IP6T_INV_VIA_IN ?" (INV)":"");
- return 0;
+ return false;
}
for (i = 0, ret = 0; i < IFNAMSIZ/sizeof(unsigned long); i++) {
dprintf("VIA out mismatch (%s vs %s).%s\n",
outdev, ip6info->outiface,
ip6info->invflags&IP6T_INV_VIA_OUT ?" (INV)":"");
- return 0;
+ return false;
}
/* ... might want to do something with class and flowlabel here ... */
protohdr = ipv6_find_hdr(skb, protoff, -1, &_frag_off);
if (protohdr < 0) {
if (_frag_off == 0)
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
*fragoff = _frag_off;
if (ip6info->proto == protohdr) {
if(ip6info->invflags & IP6T_INV_PROTO) {
- return 0;
+ return false;
}
- return 1;
+ return true;
}
/* We need match for the '-p all', too! */
if ((ip6info->proto != 0) &&
!(ip6info->invflags & IP6T_INV_PROTO))
- return 0;
+ return false;
}
- return 1;
+ return true;
}
/* should be ip6 safe */
-static inline int
+static inline bool
ip6_checkentry(const struct ip6t_ip6 *ipv6)
{
if (ipv6->flags & ~IP6T_F_MASK) {
duprintf("Unknown flag bits set: %08X\n",
ipv6->flags & ~IP6T_F_MASK);
- return 0;
+ return false;
}
if (ipv6->invflags & ~IP6T_INV_MASK) {
duprintf("Unknown invflag bits set: %08X\n",
ipv6->invflags & ~IP6T_INV_MASK);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static unsigned int
}
static inline
-int do_match(struct ip6t_entry_match *m,
- const struct sk_buff *skb,
- const struct net_device *in,
- const struct net_device *out,
- int offset,
- unsigned int protoff,
- int *hotdrop)
+bool do_match(struct ip6t_entry_match *m,
+ const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ int offset,
+ unsigned int protoff,
+ bool *hotdrop)
{
/* Stop iteration if it doesn't match */
if (!m->u.kernel.match->match(skb, in, out, m->u.kernel.match, m->data,
offset, protoff, hotdrop))
- return 1;
+ return true;
else
- return 0;
+ return false;
}
static inline struct ip6t_entry *
return (struct ip6t_entry *)(base + offset);
}
+/* All zeroes == unconditional rule. */
+static inline int
+unconditional(const struct ip6t_ip6 *ipv6)
+{
+ unsigned int i;
+
+ for (i = 0; i < sizeof(*ipv6); i++)
+ if (((char *)ipv6)[i])
+ break;
+
+ return (i == sizeof(*ipv6));
+}
+
+#if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+ defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
+/* This cries for unification! */
+static const char *hooknames[] = {
+ [NF_IP6_PRE_ROUTING] = "PREROUTING",
+ [NF_IP6_LOCAL_IN] = "INPUT",
+ [NF_IP6_FORWARD] = "FORWARD",
+ [NF_IP6_LOCAL_OUT] = "OUTPUT",
+ [NF_IP6_POST_ROUTING] = "POSTROUTING",
+};
+
+enum nf_ip_trace_comments {
+ NF_IP6_TRACE_COMMENT_RULE,
+ NF_IP6_TRACE_COMMENT_RETURN,
+ NF_IP6_TRACE_COMMENT_POLICY,
+};
+
+static const char *comments[] = {
+ [NF_IP6_TRACE_COMMENT_RULE] = "rule",
+ [NF_IP6_TRACE_COMMENT_RETURN] = "return",
+ [NF_IP6_TRACE_COMMENT_POLICY] = "policy",
+};
+
+static struct nf_loginfo trace_loginfo = {
+ .type = NF_LOG_TYPE_LOG,
+ .u = {
+ .log = {
+ .level = 4,
+ .logflags = NF_LOG_MASK,
+ },
+ },
+};
+
+static inline int
+get_chainname_rulenum(struct ip6t_entry *s, struct ip6t_entry *e,
+ char *hookname, char **chainname,
+ char **comment, unsigned int *rulenum)
+{
+ struct ip6t_standard_target *t = (void *)ip6t_get_target(s);
+
+ if (strcmp(t->target.u.kernel.target->name, IP6T_ERROR_TARGET) == 0) {
+ /* Head of user chain: ERROR target with chainname */
+ *chainname = t->target.data;
+ (*rulenum) = 0;
+ } else if (s == e) {
+ (*rulenum)++;
+
+ if (s->target_offset == sizeof(struct ip6t_entry)
+ && strcmp(t->target.u.kernel.target->name,
+ IP6T_STANDARD_TARGET) == 0
+ && t->verdict < 0
+ && unconditional(&s->ipv6)) {
+ /* Tail of chains: STANDARD target (return/policy) */
+ *comment = *chainname == hookname
+ ? (char *)comments[NF_IP6_TRACE_COMMENT_POLICY]
+ : (char *)comments[NF_IP6_TRACE_COMMENT_RETURN];
+ }
+ return 1;
+ } else
+ (*rulenum)++;
+
+ return 0;
+}
+
+static void trace_packet(struct sk_buff *skb,
+ unsigned int hook,
+ const struct net_device *in,
+ const struct net_device *out,
+ char *tablename,
+ struct xt_table_info *private,
+ struct ip6t_entry *e)
+{
+ void *table_base;
+ struct ip6t_entry *root;
+ char *hookname, *chainname, *comment;
+ unsigned int rulenum = 0;
+
+ table_base = (void *)private->entries[smp_processor_id()];
+ root = get_entry(table_base, private->hook_entry[hook]);
+
+ hookname = chainname = (char *)hooknames[hook];
+ comment = (char *)comments[NF_IP6_TRACE_COMMENT_RULE];
+
+ IP6T_ENTRY_ITERATE(root,
+ private->size - private->hook_entry[hook],
+ get_chainname_rulenum,
+ e, hookname, &chainname, &comment, &rulenum);
+
+ nf_log_packet(AF_INET6, hook, skb, in, out, &trace_loginfo,
+ "TRACE: %s:%s:%s:%u ",
+ tablename, chainname, comment, rulenum);
+}
+#endif
+
/* Returns one of the generic firewall policies, like NF_ACCEPT. */
unsigned int
ip6t_do_table(struct sk_buff **pskb,
static const char nulldevname[IFNAMSIZ] __attribute__((aligned(sizeof(long))));
int offset = 0;
unsigned int protoff = 0;
- int hotdrop = 0;
+ bool hotdrop = false;
/* Initializing verdict to NF_DROP keeps gcc happy. */
unsigned int verdict = NF_DROP;
const char *indev, *outdev;
t = ip6t_get_target(e);
IP_NF_ASSERT(t->u.kernel.target);
+
+#if defined(CONFIG_NETFILTER_XT_TARGET_TRACE) || \
+ defined(CONFIG_NETFILTER_XT_TARGET_TRACE_MODULE)
+ /* The packet is traced: log it */
+ if (unlikely((*pskb)->nf_trace))
+ trace_packet(*pskb, hook, in, out,
+ table->name, private, e);
+#endif
/* Standard target? */
if (!t->u.kernel.target->target) {
int v;
#endif
}
-/* All zeroes == unconditional rule. */
-static inline int
-unconditional(const struct ip6t_ip6 *ipv6)
-{
- unsigned int i;
-
- for (i = 0; i < sizeof(*ipv6); i++)
- if (((char *)ipv6)[i])
- break;
-
- return (i == sizeof(*ipv6));
-}
-
/* Figures out from what hook each rule can be called: returns 0 if
there are loops. Puts hook bitmask in comefrom. */
static int
}
/* Returns 1 if the type and code is matched by the range, 0 otherwise */
-static inline int
+static inline bool
icmp6_type_code_match(u_int8_t test_type, u_int8_t min_code, u_int8_t max_code,
u_int8_t type, u_int8_t code,
- int invert)
+ bool invert)
{
return (type == test_type && code >= min_code && code <= max_code)
^ invert;
}
-static int
+static bool
icmp6_match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
struct icmp6hdr _icmp, *ic;
const struct ip6t_icmp *icmpinfo = matchinfo;
/* Must not be a fragment. */
if (offset)
- return 0;
+ return false;
ic = skb_header_pointer(skb, protoff, sizeof(_icmp), &_icmp);
if (ic == NULL) {
/* We've been asked to examine this packet, and we
can't. Hence, no choice but to drop. */
duprintf("Dropping evil ICMP tinygram.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
return icmp6_type_code_match(icmpinfo->type,
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
icmp6_checkentry(const char *tablename,
const void *entry,
const struct xt_match *match,
}
/* The built-in targets: standard (NULL) and error. */
-static struct xt_target ip6t_standard_target = {
+static struct xt_target ip6t_standard_target __read_mostly = {
.name = IP6T_STANDARD_TARGET,
.targetsize = sizeof(int),
.family = AF_INET6,
};
-static struct xt_target ip6t_error_target = {
+static struct xt_target ip6t_error_target __read_mostly = {
.name = IP6T_ERROR_TARGET,
.target = ip6t_error,
.targetsize = IP6T_FUNCTION_MAXNAMELEN,
.get = do_ip6t_get_ctl,
};
-static struct xt_match icmp6_matchstruct = {
+static struct xt_match icmp6_matchstruct __read_mostly = {
.name = "icmp6",
.match = &icmp6_match,
.matchsize = sizeof(struct ip6t_icmp),
return XT_CONTINUE;
}
-static int ip6t_hl_checkentry(const char *tablename,
+static bool ip6t_hl_checkentry(const char *tablename,
const void *entry,
const struct xt_target *target,
void *targinfo,
unsigned int hook_mask)
{
- struct ip6t_HL_info *info = targinfo;
+ const struct ip6t_HL_info *info = targinfo;
if (info->mode > IP6T_HL_MAXMODE) {
printk(KERN_WARNING "ip6t_HL: invalid or unknown Mode %u\n",
info->mode);
- return 0;
+ return false;
}
- if ((info->mode != IP6T_HL_SET) && (info->hop_limit == 0)) {
+ if (info->mode != IP6T_HL_SET && info->hop_limit == 0) {
printk(KERN_WARNING "ip6t_HL: increment/decrement doesn't "
"make sense with value 0\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_target ip6t_HL = {
+static struct xt_target ip6t_HL __read_mostly = {
.name = "HL",
.family = AF_INET6,
.target = ip6t_hl_target,
#include <net/route.h>
#include <linux/netfilter_ipv6/ip6t_LOG.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Use lock to serialize, so printks don't overlap */
static DEFINE_SPINLOCK(log_lock);
{
u_int8_t currenthdr;
int fragment;
- struct ipv6hdr _ip6h, *ih;
+ struct ipv6hdr _ip6h;
+ const struct ipv6hdr *ih;
unsigned int ptr;
unsigned int hdrlen = 0;
unsigned int logflags;
ptr = ip6hoff + sizeof(struct ipv6hdr);
currenthdr = ih->nexthdr;
while (currenthdr != NEXTHDR_NONE && ip6t_ext_hdr(currenthdr)) {
- struct ipv6_opt_hdr _hdr, *hp;
+ struct ipv6_opt_hdr _hdr;
+ const struct ipv6_opt_hdr *hp;
hp = skb_header_pointer(skb, ptr, sizeof(_hdr), &_hdr);
if (hp == NULL) {
switch (currenthdr) {
case IPPROTO_FRAGMENT: {
- struct frag_hdr _fhdr, *fh;
+ struct frag_hdr _fhdr;
+ const struct frag_hdr *fh;
printk("FRAG:");
fh = skb_header_pointer(skb, ptr, sizeof(_fhdr),
/* Max Length */
case IPPROTO_AH:
if (logflags & IP6T_LOG_IPOPT) {
- struct ip_auth_hdr _ahdr, *ah;
+ struct ip_auth_hdr _ahdr;
+ const struct ip_auth_hdr *ah;
/* Max length: 3 "AH " */
printk("AH ");
break;
case IPPROTO_ESP:
if (logflags & IP6T_LOG_IPOPT) {
- struct ip_esp_hdr _esph, *eh;
+ struct ip_esp_hdr _esph;
+ const struct ip_esp_hdr *eh;
/* Max length: 4 "ESP " */
printk("ESP ");
switch (currenthdr) {
case IPPROTO_TCP: {
- struct tcphdr _tcph, *th;
+ struct tcphdr _tcph;
+ const struct tcphdr *th;
/* Max length: 10 "PROTO=TCP " */
printk("PROTO=TCP ");
if ((logflags & IP6T_LOG_TCPOPT)
&& th->doff * 4 > sizeof(struct tcphdr)) {
- u_int8_t _opt[60 - sizeof(struct tcphdr)], *op;
+ u_int8_t _opt[60 - sizeof(struct tcphdr)];
+ const u_int8_t *op;
unsigned int i;
unsigned int optsize = th->doff * 4
- sizeof(struct tcphdr);
}
case IPPROTO_UDP:
case IPPROTO_UDPLITE: {
- struct udphdr _udph, *uh;
+ struct udphdr _udph;
+ const struct udphdr *uh;
if (currenthdr == IPPROTO_UDP)
/* Max length: 10 "PROTO=UDP " */
break;
}
case IPPROTO_ICMPV6: {
- struct icmp6hdr _icmp6h, *ic;
+ struct icmp6hdr _icmp6h;
+ const struct icmp6hdr *ic;
/* Max length: 13 "PROTO=ICMPv6 " */
printk("PROTO=ICMPv6 ");
}
-static int ip6t_log_checkentry(const char *tablename,
- const void *entry,
- const struct xt_target *target,
- void *targinfo,
- unsigned int hook_mask)
+static bool ip6t_log_checkentry(const char *tablename,
+ const void *entry,
+ const struct xt_target *target,
+ void *targinfo,
+ unsigned int hook_mask)
{
const struct ip6t_log_info *loginfo = targinfo;
if (loginfo->level >= 8) {
- DEBUGP("LOG: level %u >= 8\n", loginfo->level);
- return 0;
+ pr_debug("LOG: level %u >= 8\n", loginfo->level);
+ return false;
}
if (loginfo->prefix[sizeof(loginfo->prefix)-1] != '\0') {
- DEBUGP("LOG: prefix term %i\n",
- loginfo->prefix[sizeof(loginfo->prefix)-1]);
- return 0;
+ pr_debug("LOG: prefix term %i\n",
+ loginfo->prefix[sizeof(loginfo->prefix)-1]);
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_target ip6t_log_reg = {
+static struct xt_target ip6t_log_reg __read_mostly = {
.name = "LOG",
.family = AF_INET6,
.target = ip6t_log_target,
MODULE_DESCRIPTION("IP6 tables REJECT target module");
MODULE_LICENSE("GPL");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Send RST reply */
static void send_reset(struct sk_buff *oldskb)
{
if ((!(ipv6_addr_type(&oip6h->saddr) & IPV6_ADDR_UNICAST)) ||
(!(ipv6_addr_type(&oip6h->daddr) & IPV6_ADDR_UNICAST))) {
- DEBUGP("ip6t_REJECT: addr is not unicast.\n");
+ pr_debug("ip6t_REJECT: addr is not unicast.\n");
return;
}
tcphoff = ipv6_skip_exthdr(oldskb, ((u8*)(oip6h+1) - oldskb->data), &proto);
if ((tcphoff < 0) || (tcphoff > oldskb->len)) {
- DEBUGP("ip6t_REJECT: Can't get TCP header.\n");
+ pr_debug("ip6t_REJECT: Can't get TCP header.\n");
return;
}
otcplen = oldskb->len - tcphoff;
/* IP header checks: fragment, too short. */
- if ((proto != IPPROTO_TCP) || (otcplen < sizeof(struct tcphdr))) {
- DEBUGP("ip6t_REJECT: proto(%d) != IPPROTO_TCP, or too short. otcplen = %d\n",
- proto, otcplen);
+ if (proto != IPPROTO_TCP || otcplen < sizeof(struct tcphdr)) {
+ pr_debug("ip6t_REJECT: proto(%d) != IPPROTO_TCP, "
+ "or too short. otcplen = %d\n",
+ proto, otcplen);
return;
}
/* No RST for RST. */
if (otcph.rst) {
- DEBUGP("ip6t_REJECT: RST is set\n");
+ pr_debug("ip6t_REJECT: RST is set\n");
return;
}
/* Check checksum. */
if (csum_ipv6_magic(&oip6h->saddr, &oip6h->daddr, otcplen, IPPROTO_TCP,
skb_checksum(oldskb, tcphoff, otcplen, 0))) {
- DEBUGP("ip6t_REJECT: TCP checksum is invalid\n");
+ pr_debug("ip6t_REJECT: TCP checksum is invalid\n");
return;
}
tcph->check = csum_ipv6_magic(&ipv6_hdr(nskb)->saddr,
&ipv6_hdr(nskb)->daddr,
sizeof(struct tcphdr), IPPROTO_TCP,
- csum_partial((char *)tcph,
+ csum_partial(tcph,
sizeof(struct tcphdr), 0));
nf_ct_attach(nskb, oldskb);
{
const struct ip6t_reject_info *reject = targinfo;
- DEBUGP(KERN_DEBUG "%s: medium point\n", __FUNCTION__);
+ pr_debug("%s: medium point\n", __FUNCTION__);
/* WARNING: This code causes reentry within ip6tables.
This means that the ip6tables jump stack is now crap. We
must return an absolute verdict. --RR */
return NF_DROP;
}
-static int check(const char *tablename,
- const void *entry,
- const struct xt_target *target,
- void *targinfo,
- unsigned int hook_mask)
+static bool check(const char *tablename,
+ const void *entry,
+ const struct xt_target *target,
+ void *targinfo,
+ unsigned int hook_mask)
{
const struct ip6t_reject_info *rejinfo = targinfo;
const struct ip6t_entry *e = entry;
if (rejinfo->with == IP6T_ICMP6_ECHOREPLY) {
printk("ip6t_REJECT: ECHOREPLY is not supported.\n");
- return 0;
+ return false;
} else if (rejinfo->with == IP6T_TCP_RESET) {
/* Must specify that it's a TCP packet */
if (e->ipv6.proto != IPPROTO_TCP
|| (e->ipv6.invflags & XT_INV_PROTO)) {
- DEBUGP("ip6t_REJECT: TCP_RESET illegal for non-tcp\n");
- return 0;
+ printk("ip6t_REJECT: TCP_RESET illegal for non-tcp\n");
+ return false;
}
}
- return 1;
+ return true;
}
-static struct xt_target ip6t_reject_reg = {
+static struct xt_target ip6t_reject_reg __read_mostly = {
.name = "REJECT",
.family = AF_INET6,
.target = reject6_target,
MODULE_DESCRIPTION("IPv6 AH match");
MODULE_AUTHOR("Andras Kis-Szabo <kisza@sch.bme.hu>");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Returns 1 if the spi is matched by the range, 0 otherwise */
-static inline int
-spi_match(u_int32_t min, u_int32_t max, u_int32_t spi, int invert)
+static inline bool
+spi_match(u_int32_t min, u_int32_t max, u_int32_t spi, bool invert)
{
- int r=0;
- DEBUGP("ah spi_match:%c 0x%x <= 0x%x <= 0x%x",invert? '!':' ',
- min,spi,max);
+ bool r;
+
+ pr_debug("ah spi_match:%c 0x%x <= 0x%x <= 0x%x",
+ invert ? '!' : ' ', min, spi, max);
r = (spi >= min && spi <= max) ^ invert;
- DEBUGP(" result %s\n",r? "PASS\n" : "FAILED\n");
+ pr_debug(" result %s\n", r ? "PASS" : "FAILED");
return r;
}
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
- struct ip_auth_hdr *ah, _ah;
+ struct ip_auth_hdr _ah;
+ const struct ip_auth_hdr *ah;
const struct ip6t_ah *ahinfo = matchinfo;
unsigned int ptr;
unsigned int hdrlen = 0;
err = ipv6_find_hdr(skb, &ptr, NEXTHDR_AUTH, NULL);
if (err < 0) {
if (err != -ENOENT)
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
ah = skb_header_pointer(skb, ptr, sizeof(_ah), &_ah);
if (ah == NULL) {
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
hdrlen = (ah->hdrlen + 2) << 2;
- DEBUGP("IPv6 AH LEN %u %u ", hdrlen, ah->hdrlen);
- DEBUGP("RES %04X ", ah->reserved);
- DEBUGP("SPI %u %08X\n", ntohl(ah->spi), ntohl(ah->spi));
-
- DEBUGP("IPv6 AH spi %02X ",
- (spi_match(ahinfo->spis[0], ahinfo->spis[1],
- ntohl(ah->spi),
- !!(ahinfo->invflags & IP6T_AH_INV_SPI))));
- DEBUGP("len %02X %04X %02X ",
- ahinfo->hdrlen, hdrlen,
- (!ahinfo->hdrlen ||
- (ahinfo->hdrlen == hdrlen) ^
- !!(ahinfo->invflags & IP6T_AH_INV_LEN)));
- DEBUGP("res %02X %04X %02X\n",
- ahinfo->hdrres, ah->reserved,
- !(ahinfo->hdrres && ah->reserved));
+ pr_debug("IPv6 AH LEN %u %u ", hdrlen, ah->hdrlen);
+ pr_debug("RES %04X ", ah->reserved);
+ pr_debug("SPI %u %08X\n", ntohl(ah->spi), ntohl(ah->spi));
+
+ pr_debug("IPv6 AH spi %02X ",
+ spi_match(ahinfo->spis[0], ahinfo->spis[1],
+ ntohl(ah->spi),
+ !!(ahinfo->invflags & IP6T_AH_INV_SPI)));
+ pr_debug("len %02X %04X %02X ",
+ ahinfo->hdrlen, hdrlen,
+ (!ahinfo->hdrlen ||
+ (ahinfo->hdrlen == hdrlen) ^
+ !!(ahinfo->invflags & IP6T_AH_INV_LEN)));
+ pr_debug("res %02X %04X %02X\n",
+ ahinfo->hdrres, ah->reserved,
+ !(ahinfo->hdrres && ah->reserved));
return (ah != NULL)
&&
- (spi_match(ahinfo->spis[0], ahinfo->spis[1],
- ntohl(ah->spi),
- !!(ahinfo->invflags & IP6T_AH_INV_SPI)))
+ spi_match(ahinfo->spis[0], ahinfo->spis[1],
+ ntohl(ah->spi),
+ !!(ahinfo->invflags & IP6T_AH_INV_SPI))
&&
(!ahinfo->hdrlen ||
(ahinfo->hdrlen == hdrlen) ^
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
checkentry(const char *tablename,
const void *entry,
const struct xt_match *match,
const struct ip6t_ah *ahinfo = matchinfo;
if (ahinfo->invflags & ~IP6T_AH_INV_MASK) {
- DEBUGP("ip6t_ah: unknown flags %X\n", ahinfo->invflags);
- return 0;
+ pr_debug("ip6t_ah: unknown flags %X\n", ahinfo->invflags);
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match ah_match = {
+static struct xt_match ah_match __read_mostly = {
.name = "ah",
.family = AF_INET6,
.match = match,
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Andras Kis-Szabo <kisza@sch.bme.hu>");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
unsigned char eui64[8];
int i = 0;
if (!(skb_mac_header(skb) >= skb->head &&
- (skb_mac_header(skb) + ETH_HLEN) <= skb->data) &&
+ skb_mac_header(skb) + ETH_HLEN <= skb->data) &&
offset != 0) {
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
memset(eui64, 0, sizeof(eui64));
eui64[0] |= 0x02;
i = 0;
- while ((ipv6_hdr(skb)->saddr.s6_addr[8 + i] == eui64[i])
- && (i < 8))
+ while (ipv6_hdr(skb)->saddr.s6_addr[8 + i] == eui64[i]
+ && i < 8)
i++;
if (i == 8)
- return 1;
+ return true;
}
}
- return 0;
+ return false;
}
-static struct xt_match eui64_match = {
+static struct xt_match eui64_match __read_mostly = {
.name = "eui64",
.family = AF_INET6,
.match = match,
MODULE_DESCRIPTION("IPv6 FRAG match");
MODULE_AUTHOR("Andras Kis-Szabo <kisza@sch.bme.hu>");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Returns 1 if the id is matched by the range, 0 otherwise */
-static inline int
-id_match(u_int32_t min, u_int32_t max, u_int32_t id, int invert)
+static inline bool
+id_match(u_int32_t min, u_int32_t max, u_int32_t id, bool invert)
{
- int r = 0;
- DEBUGP("frag id_match:%c 0x%x <= 0x%x <= 0x%x", invert ? '!' : ' ',
- min, id, max);
+ bool r;
+ pr_debug("frag id_match:%c 0x%x <= 0x%x <= 0x%x", invert ? '!' : ' ',
+ min, id, max);
r = (id >= min && id <= max) ^ invert;
- DEBUGP(" result %s\n", r ? "PASS" : "FAILED");
+ pr_debug(" result %s\n", r ? "PASS" : "FAILED");
return r;
}
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
- struct frag_hdr _frag, *fh;
+ struct frag_hdr _frag;
+ const struct frag_hdr *fh;
const struct ip6t_frag *fraginfo = matchinfo;
unsigned int ptr;
int err;
err = ipv6_find_hdr(skb, &ptr, NEXTHDR_FRAGMENT, NULL);
if (err < 0) {
if (err != -ENOENT)
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
fh = skb_header_pointer(skb, ptr, sizeof(_frag), &_frag);
if (fh == NULL) {
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
- DEBUGP("INFO %04X ", fh->frag_off);
- DEBUGP("OFFSET %04X ", ntohs(fh->frag_off) & ~0x7);
- DEBUGP("RES %02X %04X", fh->reserved, ntohs(fh->frag_off) & 0x6);
- DEBUGP("MF %04X ", fh->frag_off & htons(IP6_MF));
- DEBUGP("ID %u %08X\n", ntohl(fh->identification),
- ntohl(fh->identification));
-
- DEBUGP("IPv6 FRAG id %02X ",
- (id_match(fraginfo->ids[0], fraginfo->ids[1],
- ntohl(fh->identification),
- !!(fraginfo->invflags & IP6T_FRAG_INV_IDS))));
- DEBUGP("res %02X %02X%04X %02X ",
- (fraginfo->flags & IP6T_FRAG_RES), fh->reserved,
- ntohs(fh->frag_off) & 0x6,
- !((fraginfo->flags & IP6T_FRAG_RES)
- && (fh->reserved || (ntohs(fh->frag_off) & 0x06))));
- DEBUGP("first %02X %02X %02X ",
- (fraginfo->flags & IP6T_FRAG_FST),
- ntohs(fh->frag_off) & ~0x7,
- !((fraginfo->flags & IP6T_FRAG_FST)
- && (ntohs(fh->frag_off) & ~0x7)));
- DEBUGP("mf %02X %02X %02X ",
- (fraginfo->flags & IP6T_FRAG_MF),
- ntohs(fh->frag_off) & IP6_MF,
- !((fraginfo->flags & IP6T_FRAG_MF)
- && !((ntohs(fh->frag_off) & IP6_MF))));
- DEBUGP("last %02X %02X %02X\n",
- (fraginfo->flags & IP6T_FRAG_NMF),
- ntohs(fh->frag_off) & IP6_MF,
- !((fraginfo->flags & IP6T_FRAG_NMF)
- && (ntohs(fh->frag_off) & IP6_MF)));
+ pr_debug("INFO %04X ", fh->frag_off);
+ pr_debug("OFFSET %04X ", ntohs(fh->frag_off) & ~0x7);
+ pr_debug("RES %02X %04X", fh->reserved, ntohs(fh->frag_off) & 0x6);
+ pr_debug("MF %04X ", fh->frag_off & htons(IP6_MF));
+ pr_debug("ID %u %08X\n", ntohl(fh->identification),
+ ntohl(fh->identification));
+
+ pr_debug("IPv6 FRAG id %02X ",
+ id_match(fraginfo->ids[0], fraginfo->ids[1],
+ ntohl(fh->identification),
+ !!(fraginfo->invflags & IP6T_FRAG_INV_IDS)));
+ pr_debug("res %02X %02X%04X %02X ",
+ fraginfo->flags & IP6T_FRAG_RES, fh->reserved,
+ ntohs(fh->frag_off) & 0x6,
+ !((fraginfo->flags & IP6T_FRAG_RES)
+ && (fh->reserved || (ntohs(fh->frag_off) & 0x06))));
+ pr_debug("first %02X %02X %02X ",
+ fraginfo->flags & IP6T_FRAG_FST,
+ ntohs(fh->frag_off) & ~0x7,
+ !((fraginfo->flags & IP6T_FRAG_FST)
+ && (ntohs(fh->frag_off) & ~0x7)));
+ pr_debug("mf %02X %02X %02X ",
+ fraginfo->flags & IP6T_FRAG_MF,
+ ntohs(fh->frag_off) & IP6_MF,
+ !((fraginfo->flags & IP6T_FRAG_MF)
+ && !((ntohs(fh->frag_off) & IP6_MF))));
+ pr_debug("last %02X %02X %02X\n",
+ fraginfo->flags & IP6T_FRAG_NMF,
+ ntohs(fh->frag_off) & IP6_MF,
+ !((fraginfo->flags & IP6T_FRAG_NMF)
+ && (ntohs(fh->frag_off) & IP6_MF)));
return (fh != NULL)
&&
- (id_match(fraginfo->ids[0], fraginfo->ids[1],
- ntohl(fh->identification),
- !!(fraginfo->invflags & IP6T_FRAG_INV_IDS)))
+ id_match(fraginfo->ids[0], fraginfo->ids[1],
+ ntohl(fh->identification),
+ !!(fraginfo->invflags & IP6T_FRAG_INV_IDS))
&&
!((fraginfo->flags & IP6T_FRAG_RES)
&& (fh->reserved || (ntohs(fh->frag_off) & 0x6)))
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
checkentry(const char *tablename,
const void *ip,
const struct xt_match *match,
const struct ip6t_frag *fraginfo = matchinfo;
if (fraginfo->invflags & ~IP6T_FRAG_INV_MASK) {
- DEBUGP("ip6t_frag: unknown flags %X\n", fraginfo->invflags);
- return 0;
+ pr_debug("ip6t_frag: unknown flags %X\n", fraginfo->invflags);
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match frag_match = {
+static struct xt_match frag_match __read_mostly = {
.name = "frag",
.family = AF_INET6,
.match = match,
MODULE_AUTHOR("Andras Kis-Szabo <kisza@sch.bme.hu>");
MODULE_ALIAS("ip6t_dst");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/*
* (Type & 0xC0) >> 6
* 0 -> ignorable
* 5 -> RTALERT 2 x x
*/
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
- struct ipv6_opt_hdr _optsh, *oh;
+ struct ipv6_opt_hdr _optsh;
+ const struct ipv6_opt_hdr *oh;
const struct ip6t_opts *optinfo = matchinfo;
unsigned int temp;
unsigned int ptr;
unsigned int hdrlen = 0;
- unsigned int ret = 0;
- u8 _opttype, *tp = NULL;
- u8 _optlen, *lp = NULL;
+ bool ret = false;
+ u8 _opttype;
+ u8 _optlen;
+ const u_int8_t *tp = NULL;
+ const u_int8_t *lp = NULL;
unsigned int optlen;
int err;
err = ipv6_find_hdr(skb, &ptr, match->data, NULL);
if (err < 0) {
if (err != -ENOENT)
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
oh = skb_header_pointer(skb, ptr, sizeof(_optsh), &_optsh);
if (oh == NULL) {
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
hdrlen = ipv6_optlen(oh);
if (skb->len - ptr < hdrlen) {
/* Packet smaller than it's length field */
- return 0;
+ return false;
}
- DEBUGP("IPv6 OPTS LEN %u %u ", hdrlen, oh->hdrlen);
+ pr_debug("IPv6 OPTS LEN %u %u ", hdrlen, oh->hdrlen);
- DEBUGP("len %02X %04X %02X ",
- optinfo->hdrlen, hdrlen,
- (!(optinfo->flags & IP6T_OPTS_LEN) ||
- ((optinfo->hdrlen == hdrlen) ^
- !!(optinfo->invflags & IP6T_OPTS_INV_LEN))));
+ pr_debug("len %02X %04X %02X ",
+ optinfo->hdrlen, hdrlen,
+ (!(optinfo->flags & IP6T_OPTS_LEN) ||
+ ((optinfo->hdrlen == hdrlen) ^
+ !!(optinfo->invflags & IP6T_OPTS_INV_LEN))));
ret = (oh != NULL) &&
(!(optinfo->flags & IP6T_OPTS_LEN) ||
if (!(optinfo->flags & IP6T_OPTS_OPTS)) {
return ret;
} else if (optinfo->flags & IP6T_OPTS_NSTRICT) {
- DEBUGP("Not strict - not implemented");
+ pr_debug("Not strict - not implemented");
} else {
- DEBUGP("Strict ");
- DEBUGP("#%d ", optinfo->optsnr);
+ pr_debug("Strict ");
+ pr_debug("#%d ", optinfo->optsnr);
for (temp = 0; temp < optinfo->optsnr; temp++) {
/* type field exists ? */
if (hdrlen < 1)
/* Type check */
if (*tp != (optinfo->opts[temp] & 0xFF00) >> 8) {
- DEBUGP("Tbad %02X %02X\n",
- *tp,
- (optinfo->opts[temp] & 0xFF00) >> 8);
- return 0;
+ pr_debug("Tbad %02X %02X\n", *tp,
+ (optinfo->opts[temp] & 0xFF00) >> 8);
+ return false;
} else {
- DEBUGP("Tok ");
+ pr_debug("Tok ");
}
/* Length check */
if (*tp) {
spec_len = optinfo->opts[temp] & 0x00FF;
if (spec_len != 0x00FF && spec_len != *lp) {
- DEBUGP("Lbad %02X %04X\n", *lp,
- spec_len);
- return 0;
+ pr_debug("Lbad %02X %04X\n", *lp,
+ spec_len);
+ return false;
}
- DEBUGP("Lok ");
+ pr_debug("Lok ");
optlen = *lp + 2;
} else {
- DEBUGP("Pad1\n");
+ pr_debug("Pad1\n");
optlen = 1;
}
/* Step to the next */
- DEBUGP("len%04X \n", optlen);
+ pr_debug("len%04X \n", optlen);
if ((ptr > skb->len - optlen || hdrlen < optlen) &&
- (temp < optinfo->optsnr - 1)) {
- DEBUGP("new pointer is too large! \n");
+ temp < optinfo->optsnr - 1) {
+ pr_debug("new pointer is too large! \n");
break;
}
ptr += optlen;
if (temp == optinfo->optsnr)
return ret;
else
- return 0;
+ return false;
}
- return 0;
+ return false;
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
checkentry(const char *tablename,
const void *entry,
const struct xt_match *match,
const struct ip6t_opts *optsinfo = matchinfo;
if (optsinfo->invflags & ~IP6T_OPTS_INV_MASK) {
- DEBUGP("ip6t_opts: unknown flags %X\n", optsinfo->invflags);
- return 0;
+ pr_debug("ip6t_opts: unknown flags %X\n", optsinfo->invflags);
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match opts_match[] = {
+static struct xt_match opts_match[] __read_mostly = {
{
.name = "hbh",
.family = AF_INET6,
MODULE_DESCRIPTION("IP tables Hop Limit matching module");
MODULE_LICENSE("GPL");
-static int match(const struct sk_buff *skb,
- const struct net_device *in, const struct net_device *out,
- const struct xt_match *match, const void *matchinfo,
- int offset, unsigned int protoff, int *hotdrop)
+static bool match(const struct sk_buff *skb,
+ const struct net_device *in, const struct net_device *out,
+ const struct xt_match *match, const void *matchinfo,
+ int offset, unsigned int protoff, bool *hotdrop)
{
const struct ip6t_hl_info *info = matchinfo;
const struct ipv6hdr *ip6h = ipv6_hdr(skb);
switch (info->mode) {
case IP6T_HL_EQ:
- return (ip6h->hop_limit == info->hop_limit);
+ return ip6h->hop_limit == info->hop_limit;
break;
case IP6T_HL_NE:
- return (!(ip6h->hop_limit == info->hop_limit));
+ return ip6h->hop_limit != info->hop_limit;
break;
case IP6T_HL_LT:
- return (ip6h->hop_limit < info->hop_limit);
+ return ip6h->hop_limit < info->hop_limit;
break;
case IP6T_HL_GT:
- return (ip6h->hop_limit > info->hop_limit);
+ return ip6h->hop_limit > info->hop_limit;
break;
default:
printk(KERN_WARNING "ip6t_hl: unknown mode %d\n",
info->mode);
- return 0;
+ return false;
}
- return 0;
+ return false;
}
-static struct xt_match hl_match = {
+static struct xt_match hl_match __read_mostly = {
.name = "hl",
.family = AF_INET6,
.match = match,
MODULE_DESCRIPTION("IPv6 headers match");
MODULE_AUTHOR("Andras Kis-Szabo <kisza@sch.bme.hu>");
-static int
+static bool
ipv6header_match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct ip6t_ipv6header_info *info = matchinfo;
unsigned int temp;
/* Is there enough space for the next ext header? */
if (len < (int)sizeof(struct ipv6_opt_hdr))
- return 0;
+ return false;
/* No more exthdr -> evaluate */
if (nexthdr == NEXTHDR_NONE) {
temp |= MASK_NONE;
BUG_ON(hp == NULL);
/* Calculate the header length */
- if (nexthdr == NEXTHDR_FRAGMENT) {
+ if (nexthdr == NEXTHDR_FRAGMENT)
hdrlen = 8;
- } else if (nexthdr == NEXTHDR_AUTH)
+ else if (nexthdr == NEXTHDR_AUTH)
hdrlen = (hp->hdrlen + 2) << 2;
else
hdrlen = ipv6_optlen(hp);
temp |= MASK_DSTOPTS;
break;
default:
- return 0;
+ return false;
break;
}
break;
}
- if ((nexthdr != NEXTHDR_NONE) && (nexthdr != NEXTHDR_ESP))
+ if (nexthdr != NEXTHDR_NONE && nexthdr != NEXTHDR_ESP)
temp |= MASK_PROTO;
if (info->modeflag)
}
}
-static int
+static bool
ipv6header_checkentry(const char *tablename,
const void *ip,
const struct xt_match *match,
/* invflags is 0 or 0xff in hard mode */
if ((!info->modeflag) && info->invflags != 0x00 &&
info->invflags != 0xFF)
- return 0;
+ return false;
- return 1;
+ return true;
}
-static struct xt_match ip6t_ipv6header_match = {
+static struct xt_match ip6t_ipv6header_match __read_mostly = {
.name = "ipv6header",
.family = AF_INET6,
.match = &ipv6header_match,
#endif
/* Returns 1 if the type is matched by the range, 0 otherwise */
-static inline int
-type_match(u_int8_t min, u_int8_t max, u_int8_t type, int invert)
+static inline bool
+type_match(u_int8_t min, u_int8_t max, u_int8_t type, bool invert)
{
- int ret;
-
- ret = (type >= min && type <= max) ^ invert;
- return ret;
+ return (type >= min && type <= max) ^ invert;
}
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
- struct ip6_mh _mh, *mh;
+ struct ip6_mh _mh;
+ const struct ip6_mh *mh;
const struct ip6t_mh *mhinfo = matchinfo;
/* Must not be a fragment. */
if (offset)
- return 0;
+ return false;
mh = skb_header_pointer(skb, protoff, sizeof(_mh), &_mh);
if (mh == NULL) {
/* We've been asked to examine this packet, and we
can't. Hence, no choice but to drop. */
duprintf("Dropping evil MH tinygram.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
if (mh->ip6mh_proto != IPPROTO_NONE) {
duprintf("Dropping invalid MH Payload Proto: %u\n",
mh->ip6mh_proto);
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
return type_match(mhinfo->types[0], mhinfo->types[1], mh->ip6mh_type,
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
mh_checkentry(const char *tablename,
const void *entry,
const struct xt_match *match,
return !(mhinfo->invflags & ~IP6T_MH_INV_MASK);
}
-static struct xt_match mh_match = {
+static struct xt_match mh_match __read_mostly = {
.name = "mh",
.family = AF_INET6,
.checkentry = mh_checkentry,
MODULE_LICENSE("GPL");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct ip6t_owner_info *info = matchinfo;
if (!skb->sk || !skb->sk->sk_socket || !skb->sk->sk_socket->file)
- return 0;
+ return false;
- if (info->match & IP6T_OWNER_UID) {
+ if (info->match & IP6T_OWNER_UID)
if ((skb->sk->sk_socket->file->f_uid != info->uid) ^
!!(info->invert & IP6T_OWNER_UID))
- return 0;
- }
+ return false;
- if (info->match & IP6T_OWNER_GID) {
+ if (info->match & IP6T_OWNER_GID)
if ((skb->sk->sk_socket->file->f_gid != info->gid) ^
!!(info->invert & IP6T_OWNER_GID))
- return 0;
- }
+ return false;
- return 1;
+ return true;
}
-static int
+static bool
checkentry(const char *tablename,
const void *ip,
const struct xt_match *match,
if (info->match & (IP6T_OWNER_PID | IP6T_OWNER_SID)) {
printk("ipt_owner: pid and sid matching "
"not supported anymore\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match owner_match = {
+static struct xt_match owner_match __read_mostly = {
.name = "owner",
.family = AF_INET6,
.match = match,
MODULE_DESCRIPTION("IPv6 RT match");
MODULE_AUTHOR("Andras Kis-Szabo <kisza@sch.bme.hu>");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Returns 1 if the id is matched by the range, 0 otherwise */
-static inline int
-segsleft_match(u_int32_t min, u_int32_t max, u_int32_t id, int invert)
+static inline bool
+segsleft_match(u_int32_t min, u_int32_t max, u_int32_t id, bool invert)
{
- int r = 0;
- DEBUGP("rt segsleft_match:%c 0x%x <= 0x%x <= 0x%x",
- invert ? '!' : ' ', min, id, max);
+ bool r;
+ pr_debug("rt segsleft_match:%c 0x%x <= 0x%x <= 0x%x",
+ invert ? '!' : ' ', min, id, max);
r = (id >= min && id <= max) ^ invert;
- DEBUGP(" result %s\n", r ? "PASS" : "FAILED");
+ pr_debug(" result %s\n", r ? "PASS" : "FAILED");
return r;
}
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
- struct ipv6_rt_hdr _route, *rh;
+ struct ipv6_rt_hdr _route;
+ const struct ipv6_rt_hdr *rh;
const struct ip6t_rt *rtinfo = matchinfo;
unsigned int temp;
unsigned int ptr;
unsigned int hdrlen = 0;
- unsigned int ret = 0;
- struct in6_addr *ap, _addr;
+ bool ret = false;
+ struct in6_addr _addr;
+ const struct in6_addr *ap;
int err;
err = ipv6_find_hdr(skb, &ptr, NEXTHDR_ROUTING, NULL);
if (err < 0) {
if (err != -ENOENT)
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
rh = skb_header_pointer(skb, ptr, sizeof(_route), &_route);
if (rh == NULL) {
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
hdrlen = ipv6_optlen(rh);
if (skb->len - ptr < hdrlen) {
/* Pcket smaller than its length field */
- return 0;
+ return false;
}
- DEBUGP("IPv6 RT LEN %u %u ", hdrlen, rh->hdrlen);
- DEBUGP("TYPE %04X ", rh->type);
- DEBUGP("SGS_LEFT %u %02X\n", rh->segments_left, rh->segments_left);
-
- DEBUGP("IPv6 RT segsleft %02X ",
- (segsleft_match(rtinfo->segsleft[0], rtinfo->segsleft[1],
- rh->segments_left,
- !!(rtinfo->invflags & IP6T_RT_INV_SGS))));
- DEBUGP("type %02X %02X %02X ",
- rtinfo->rt_type, rh->type,
- (!(rtinfo->flags & IP6T_RT_TYP) ||
- ((rtinfo->rt_type == rh->type) ^
- !!(rtinfo->invflags & IP6T_RT_INV_TYP))));
- DEBUGP("len %02X %04X %02X ",
- rtinfo->hdrlen, hdrlen,
- (!(rtinfo->flags & IP6T_RT_LEN) ||
- ((rtinfo->hdrlen == hdrlen) ^
- !!(rtinfo->invflags & IP6T_RT_INV_LEN))));
- DEBUGP("res %02X %02X %02X ",
- (rtinfo->flags & IP6T_RT_RES),
- ((struct rt0_hdr *)rh)->reserved,
- !((rtinfo->flags & IP6T_RT_RES) &&
- (((struct rt0_hdr *)rh)->reserved)));
+ pr_debug("IPv6 RT LEN %u %u ", hdrlen, rh->hdrlen);
+ pr_debug("TYPE %04X ", rh->type);
+ pr_debug("SGS_LEFT %u %02X\n", rh->segments_left, rh->segments_left);
+
+ pr_debug("IPv6 RT segsleft %02X ",
+ segsleft_match(rtinfo->segsleft[0], rtinfo->segsleft[1],
+ rh->segments_left,
+ !!(rtinfo->invflags & IP6T_RT_INV_SGS)));
+ pr_debug("type %02X %02X %02X ",
+ rtinfo->rt_type, rh->type,
+ (!(rtinfo->flags & IP6T_RT_TYP) ||
+ ((rtinfo->rt_type == rh->type) ^
+ !!(rtinfo->invflags & IP6T_RT_INV_TYP))));
+ pr_debug("len %02X %04X %02X ",
+ rtinfo->hdrlen, hdrlen,
+ !(rtinfo->flags & IP6T_RT_LEN) ||
+ ((rtinfo->hdrlen == hdrlen) ^
+ !!(rtinfo->invflags & IP6T_RT_INV_LEN)));
+ pr_debug("res %02X %02X %02X ",
+ rtinfo->flags & IP6T_RT_RES,
+ ((const struct rt0_hdr *)rh)->reserved,
+ !((rtinfo->flags & IP6T_RT_RES) &&
+ (((const struct rt0_hdr *)rh)->reserved)));
ret = (rh != NULL)
&&
ret = (*rp == 0);
}
- DEBUGP("#%d ", rtinfo->addrnr);
+ pr_debug("#%d ", rtinfo->addrnr);
if (!(rtinfo->flags & IP6T_RT_FST)) {
return ret;
} else if (rtinfo->flags & IP6T_RT_FST_NSTRICT) {
- DEBUGP("Not strict ");
+ pr_debug("Not strict ");
if (rtinfo->addrnr > (unsigned int)((hdrlen - 8) / 16)) {
- DEBUGP("There isn't enough space\n");
- return 0;
+ pr_debug("There isn't enough space\n");
+ return false;
} else {
unsigned int i = 0;
- DEBUGP("#%d ", rtinfo->addrnr);
+ pr_debug("#%d ", rtinfo->addrnr);
for (temp = 0;
temp < (unsigned int)((hdrlen - 8) / 16);
temp++) {
BUG_ON(ap == NULL);
if (ipv6_addr_equal(ap, &rtinfo->addrs[i])) {
- DEBUGP("i=%d temp=%d;\n", i, temp);
+ pr_debug("i=%d temp=%d;\n", i, temp);
i++;
}
if (i == rtinfo->addrnr)
break;
}
- DEBUGP("i=%d #%d\n", i, rtinfo->addrnr);
+ pr_debug("i=%d #%d\n", i, rtinfo->addrnr);
if (i == rtinfo->addrnr)
return ret;
else
- return 0;
+ return false;
}
} else {
- DEBUGP("Strict ");
+ pr_debug("Strict ");
if (rtinfo->addrnr > (unsigned int)((hdrlen - 8) / 16)) {
- DEBUGP("There isn't enough space\n");
- return 0;
+ pr_debug("There isn't enough space\n");
+ return false;
} else {
- DEBUGP("#%d ", rtinfo->addrnr);
+ pr_debug("#%d ", rtinfo->addrnr);
for (temp = 0; temp < rtinfo->addrnr; temp++) {
ap = skb_header_pointer(skb,
ptr
if (!ipv6_addr_equal(ap, &rtinfo->addrs[temp]))
break;
}
- DEBUGP("temp=%d #%d\n", temp, rtinfo->addrnr);
- if ((temp == rtinfo->addrnr) &&
- (temp == (unsigned int)((hdrlen - 8) / 16)))
+ pr_debug("temp=%d #%d\n", temp, rtinfo->addrnr);
+ if (temp == rtinfo->addrnr &&
+ temp == (unsigned int)((hdrlen - 8) / 16))
return ret;
else
- return 0;
+ return false;
}
}
- return 0;
+ return false;
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
checkentry(const char *tablename,
const void *entry,
const struct xt_match *match,
const struct ip6t_rt *rtinfo = matchinfo;
if (rtinfo->invflags & ~IP6T_RT_INV_MASK) {
- DEBUGP("ip6t_rt: unknown flags %X\n", rtinfo->invflags);
- return 0;
+ pr_debug("ip6t_rt: unknown flags %X\n", rtinfo->invflags);
+ return false;
}
if ((rtinfo->flags & (IP6T_RT_RES | IP6T_RT_FST_MASK)) &&
(!(rtinfo->flags & IP6T_RT_TYP) ||
(rtinfo->rt_type != 0) ||
(rtinfo->invflags & IP6T_RT_INV_TYP))) {
- DEBUGP("`--rt-type 0' required before `--rt-0-*'");
- return 0;
+ pr_debug("`--rt-type 0' required before `--rt-0-*'");
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match rt_match = {
+static struct xt_match rt_match __read_mostly = {
.name = "rt",
.family = AF_INET6,
.match = match,
(1 << NF_IP6_LOCAL_OUT) | \
(1 << NF_IP6_POST_ROUTING))
-#if 0
-#define DEBUGP(x, args...) printk(KERN_DEBUG x, ## args)
-#else
-#define DEBUGP(x, args...)
-#endif
-
static struct
{
struct ip6t_replace repl;
#define RAW_VALID_HOOKS ((1 << NF_IP6_PRE_ROUTING) | (1 << NF_IP6_LOCAL_OUT))
-#if 0
-#define DEBUGP(x, args...) printk(KERN_DEBUG x, ## args)
-#else
-#define DEBUGP(x, args...)
-#endif
-
static struct
{
struct ip6t_replace repl;
#include <net/netfilter/nf_conntrack_l3proto.h>
#include <net/netfilter/nf_conntrack_core.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
static int ipv6_pkt_to_tuple(const struct sk_buff *skb, unsigned int nhoff,
struct nf_conntrack_tuple *tuple)
{
* except of IPv6 & ext headers. but it's tracked anyway. - YK
*/
if ((protoff < 0) || (protoff > (*pskb)->len)) {
- DEBUGP("ip6_conntrack_core: can't find proto in pkt\n");
+ pr_debug("ip6_conntrack_core: can't find proto in pkt\n");
NF_CT_STAT_INC_ATOMIC(error);
NF_CT_STAT_INC_ATOMIC(invalid);
return -NF_ACCEPT;
return NF_ACCEPT;
}
-static u_int32_t ipv6_get_features(const struct nf_conntrack_tuple *tuple)
-{
- return NF_CT_F_BASIC;
-}
-
static unsigned int ipv6_confirm(unsigned int hooknum,
struct sk_buff **pskb,
const struct net_device *in,
protoff = nf_ct_ipv6_skip_exthdr(*pskb, extoff, &pnum,
(*pskb)->len - extoff);
if (protoff > (*pskb)->len || pnum == NEXTHDR_FRAGMENT) {
- DEBUGP("proto header not found\n");
+ pr_debug("proto header not found\n");
return NF_ACCEPT;
}
.ctl_table_path = nf_net_netfilter_sysctl_path,
.ctl_table = nf_ct_ipv6_sysctl_table,
#endif
- .get_features = ipv6_get_features,
.me = THIS_MODULE,
};
static unsigned long nf_ct_icmpv6_timeout __read_mostly = 30*HZ;
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
static int icmpv6_pkt_to_tuple(const struct sk_buff *skb,
unsigned int dataoff,
struct nf_conntrack_tuple *tuple)
if (type < 0 || type >= sizeof(valid_new) || !valid_new[type]) {
/* Can't create a new ICMPv6 `conn' with this. */
- DEBUGP("icmpv6: can't create new conn with type %u\n",
- type + 128);
+ pr_debug("icmpv6: can't create new conn with type %u\n",
+ type + 128);
NF_CT_DUMP_TUPLE(&conntrack->tuplehash[0].tuple);
return 0;
}
hp = skb_header_pointer(skb, icmp6off, sizeof(_hdr), &_hdr);
if (hp == NULL) {
- DEBUGP("icmpv6_error: Can't get ICMPv6 hdr.\n");
+ pr_debug("icmpv6_error: Can't get ICMPv6 hdr.\n");
return -NF_ACCEPT;
}
inip6off = icmp6off + sizeof(_hdr);
if (skb_copy_bits(skb, inip6off+offsetof(struct ipv6hdr, nexthdr),
&inprotonum, sizeof(inprotonum)) != 0) {
- DEBUGP("icmpv6_error: Can't get nexthdr in inner IPv6 header.\n");
+ pr_debug("icmpv6_error: Can't get nexthdr in inner IPv6 "
+ "header.\n");
return -NF_ACCEPT;
}
inprotoff = nf_ct_ipv6_skip_exthdr(skb,
- sizeof(struct ipv6hdr));
if ((inprotoff > skb->len) || (inprotonum == NEXTHDR_FRAGMENT)) {
- DEBUGP("icmpv6_error: Can't get protocol header in ICMPv6 payload.\n");
+ pr_debug("icmpv6_error: Can't get protocol header in ICMPv6 "
+ "payload.\n");
return -NF_ACCEPT;
}
/* Are they talking about one of our connections? */
if (!nf_ct_get_tuple(skb, inip6off, inprotoff, PF_INET6, inprotonum,
&origtuple, &nf_conntrack_l3proto_ipv6, inproto)) {
- DEBUGP("icmpv6_error: Can't get tuple\n");
+ pr_debug("icmpv6_error: Can't get tuple\n");
return -NF_ACCEPT;
}
been preserved inside the ICMP. */
if (!nf_ct_invert_tuple(&intuple, &origtuple,
&nf_conntrack_l3proto_ipv6, inproto)) {
- DEBUGP("icmpv6_error: Can't invert tuple\n");
+ pr_debug("icmpv6_error: Can't invert tuple\n");
return -NF_ACCEPT;
}
*ctinfo = IP_CT_RELATED;
- h = nf_conntrack_find_get(&intuple, NULL);
+ h = nf_conntrack_find_get(&intuple);
if (!h) {
- DEBUGP("icmpv6_error: no match\n");
+ pr_debug("icmpv6_error: no match\n");
return -NF_ACCEPT;
} else {
if (NF_CT_DIRECTION(h) == IP_CT_DIR_REPLY)
#include <linux/kernel.h>
#include <linux/module.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
#define NF_CT_FRAG6_HIGH_THRESH 262144 /* == 256*1024 */
#define NF_CT_FRAG6_LOW_THRESH 196608 /* == 192*1024 */
#define NF_CT_FRAG6_TIMEOUT IPV6_FRAG_TIMEOUT
struct nf_ct_frag6_queue *fq;
if ((fq = frag_alloc_queue()) == NULL) {
- DEBUGP("Can't alloc new queue\n");
+ pr_debug("Can't alloc new queue\n");
goto oom;
}
int offset, end;
if (fq->last_in & COMPLETE) {
- DEBUGP("Allready completed\n");
+ pr_debug("Allready completed\n");
goto err;
}
((u8 *)(fhdr + 1) - (u8 *)(ipv6_hdr(skb) + 1)));
if ((unsigned int)end > IPV6_MAXPLEN) {
- DEBUGP("offset is too large.\n");
+ pr_debug("offset is too large.\n");
return -1;
}
*/
if (end < fq->len ||
((fq->last_in & LAST_IN) && end != fq->len)) {
- DEBUGP("already received last fragment\n");
+ pr_debug("already received last fragment\n");
goto err;
}
fq->last_in |= LAST_IN;
/* RFC2460 says always send parameter problem in
* this case. -DaveM
*/
- DEBUGP("the end of this fragment is not rounded to 8 bytes.\n");
+ pr_debug("end of fragment not rounded to 8 bytes.\n");
return -1;
}
if (end > fq->len) {
/* Some bits beyond end -> corruption. */
if (fq->last_in & LAST_IN) {
- DEBUGP("last packet already reached.\n");
+ pr_debug("last packet already reached.\n");
goto err;
}
fq->len = end;
/* Point into the IP datagram 'data' part. */
if (!pskb_pull(skb, (u8 *) (fhdr + 1) - skb->data)) {
- DEBUGP("queue: message is too short.\n");
+ pr_debug("queue: message is too short.\n");
goto err;
}
if (pskb_trim_rcsum(skb, end - offset)) {
- DEBUGP("Can't trim\n");
+ pr_debug("Can't trim\n");
goto err;
}
if (i > 0) {
offset += i;
if (end <= offset) {
- DEBUGP("overlap\n");
+ pr_debug("overlap\n");
goto err;
}
if (!pskb_pull(skb, i)) {
- DEBUGP("Can't pull\n");
+ pr_debug("Can't pull\n");
goto err;
}
if (skb->ip_summed != CHECKSUM_UNNECESSARY)
/* Eat head of the next overlapped fragment
* and leave the loop. The next ones cannot overlap.
*/
- DEBUGP("Eat head of the overlapped parts.: %d", i);
+ pr_debug("Eat head of the overlapped parts.: %d", i);
if (!pskb_pull(next, i))
goto err;
sizeof(struct ipv6hdr) + fq->len -
sizeof(struct frag_hdr));
if (payload_len > IPV6_MAXPLEN) {
- DEBUGP("payload len is too large.\n");
+ pr_debug("payload len is too large.\n");
goto out_oversize;
}
/* Head of list must not be cloned. */
if (skb_cloned(head) && pskb_expand_head(head, 0, 0, GFP_ATOMIC)) {
- DEBUGP("skb is cloned but can't expand head");
+ pr_debug("skb is cloned but can't expand head");
goto out_oom;
}
int i, plen = 0;
if ((clone = alloc_skb(0, GFP_ATOMIC)) == NULL) {
- DEBUGP("Can't alloc skb\n");
+ pr_debug("Can't alloc skb\n");
goto out_oom;
}
clone->next = head->next;
return -1;
}
if (len < (int)sizeof(struct ipv6_opt_hdr)) {
- DEBUGP("too short\n");
+ pr_debug("too short\n");
return -1;
}
if (nexthdr == NEXTHDR_NONE) {
- DEBUGP("next header is none\n");
+ pr_debug("next header is none\n");
return -1;
}
if (skb_copy_bits(skb, start, &hdr, sizeof(hdr)))
/* Jumbo payload inhibits frag. header */
if (ipv6_hdr(skb)->payload_len == 0) {
- DEBUGP("payload len = 0\n");
+ pr_debug("payload len = 0\n");
return skb;
}
clone = skb_clone(skb, GFP_ATOMIC);
if (clone == NULL) {
- DEBUGP("Can't clone skb\n");
+ pr_debug("Can't clone skb\n");
return skb;
}
NFCT_FRAG6_CB(clone)->orig = skb;
if (!pskb_may_pull(clone, fhoff + sizeof(*fhdr))) {
- DEBUGP("message is too short.\n");
+ pr_debug("message is too short.\n");
goto ret_orig;
}
fhdr = (struct frag_hdr *)skb_transport_header(clone);
if (!(fhdr->frag_off & htons(0xFFF9))) {
- DEBUGP("Invalid fragment offset\n");
+ pr_debug("Invalid fragment offset\n");
/* It is not a fragmented frame */
goto ret_orig;
}
fq = fq_find(fhdr->identification, &hdr->saddr, &hdr->daddr);
if (fq == NULL) {
- DEBUGP("Can't find and can't create new queue\n");
+ pr_debug("Can't find and can't create new queue\n");
goto ret_orig;
}
if (nf_ct_frag6_queue(fq, clone, fhdr, nhoff) < 0) {
spin_unlock(&fq->lock);
- DEBUGP("Can't insert skb to queue\n");
+ pr_debug("Can't insert skb to queue\n");
fq_put(fq, NULL);
goto ret_orig;
}
if (fq->last_in == (FIRST_IN|LAST_IN) && fq->meat == fq->len) {
ret_skb = nf_ct_frag6_reasm(fq, dev);
if (ret_skb == NULL)
- DEBUGP("Can't reassemble fragmented packets\n");
+ pr_debug("Can't reassemble fragmented packets\n");
}
spin_unlock(&fq->lock);
#include <net/udp.h>
#include <net/inet_common.h>
#include <net/tcp_states.h>
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
#include <net/mip6.h>
#endif
return 0;
}
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
+static int (*mh_filter)(struct sock *sock, struct sk_buff *skb);
+
+int rawv6_mh_filter_register(int (*filter)(struct sock *sock,
+ struct sk_buff *skb))
+{
+ rcu_assign_pointer(mh_filter, filter);
+ return 0;
+}
+EXPORT_SYMBOL(rawv6_mh_filter_register);
+
+int rawv6_mh_filter_unregister(int (*filter)(struct sock *sock,
+ struct sk_buff *skb))
+{
+ rcu_assign_pointer(mh_filter, NULL);
+ synchronize_rcu();
+ return 0;
+}
+EXPORT_SYMBOL(rawv6_mh_filter_unregister);
+
+#endif
+
/*
* demultiplex raw sockets.
* (should consider queueing the skb in the sock receive_queue
case IPPROTO_ICMPV6:
filtered = icmpv6_filter(sk, skb);
break;
-#ifdef CONFIG_IPV6_MIP6
+
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPPROTO_MH:
+ {
/* XXX: To validate MH only once for each packet,
* this is placed here. It should be after checking
* xfrm policy, however it doesn't. The checking xfrm
* policy is placed in rawv6_rcv() because it is
* required for each socket.
*/
- filtered = mip6_mh_filter(sk, skb);
+ int (*filter)(struct sock *sock, struct sk_buff *skb);
+
+ filter = rcu_dereference(mh_filter);
+ filtered = filter ? filter(sk, skb) : 0;
break;
+ }
#endif
default:
filtered = 0;
struct iovec *iov;
u8 __user *type = NULL;
u8 __user *code = NULL;
-#ifdef CONFIG_IPV6_MIP6
u8 len = 0;
-#endif
int probed = 0;
int i;
probed = 1;
}
break;
-#ifdef CONFIG_IPV6_MIP6
case IPPROTO_MH:
if (iov->iov_base && iov->iov_len < 1)
break;
len += iov->iov_len;
break;
-#endif
default:
probed = 1;
break;
return 0;
}
-static struct seq_operations raw6_seq_ops = {
+static const struct seq_operations raw6_seq_ops = {
.start = raw6_seq_start,
.next = raw6_seq_next,
.stop = raw6_seq_stop,
*/
max_headroom = LL_RESERVED_SPACE(tdev)+sizeof(struct iphdr);
- if (skb_headroom(skb) < max_headroom || skb_cloned(skb) || skb_shared(skb)) {
+ if (skb_headroom(skb) < max_headroom || skb_shared(skb) ||
+ (skb_cloned(skb) && !skb_clone_writable(skb, 0))) {
struct sk_buff *new_skb = skb_realloc_headroom(skb, max_headroom);
if (!new_skb) {
ip_rt_put(rt);
if (dst == NULL) {
opt = np->opt;
- if (opt == NULL &&
- np->rxopt.bits.osrcrt == 2 &&
- treq->pktopts) {
- struct sk_buff *pktopts = treq->pktopts;
- struct inet6_skb_parm *rxopt = IP6CB(pktopts);
- if (rxopt->srcrt)
- opt = ipv6_invert_rthdr(sk,
- (struct ipv6_rt_hdr *)(skb_network_header(pktopts) +
- rxopt->srcrt));
- }
-
if (opt && opt->srcrt) {
struct rt0_hdr *rt0 = (struct rt0_hdr *) opt->srcrt;
ipv6_addr_copy(&final, &fl.fl6_dst);
if (sk_acceptq_is_full(sk))
goto out_overflow;
- if (np->rxopt.bits.osrcrt == 2 &&
- opt == NULL && treq->pktopts) {
- struct inet6_skb_parm *rxopt = IP6CB(treq->pktopts);
- if (rxopt->srcrt)
- opt = ipv6_invert_rthdr(sk,
- (struct ipv6_rt_hdr *)(skb_network_header(treq->pktopts) +
- rxopt->srcrt));
- }
-
if (dst == NULL) {
struct in6_addr *final_p = NULL, final;
struct flowi fl;
#include <net/ip.h>
#include <net/ipv6.h>
#include <net/ip6_route.h>
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
#include <net/mip6.h>
#endif
fl->proto = nexthdr;
return;
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
case IPPROTO_MH:
if (pskb_may_pull(skb, nh + offset + 3 - skb->data)) {
struct ip6_mh *mh;
goto end;
/* Rule 2: select MIPv6 RO or inbound trigger */
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
for (i = 0; i < n; i++) {
if (src[i] &&
(src[i]->props.mode == XFRM_MODE_ROUTEOPTIMIZATION ||
goto end;
/* Rule 2: select MIPv6 RO or inbound trigger */
-#ifdef CONFIG_IPV6_MIP6
+#if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE)
for (i = 0; i < n; i++) {
if (src[i] &&
(src[i]->mode == XFRM_MODE_ROUTEOPTIMIZATION ||
module_init(xfrm6_tunnel_init);
module_exit(xfrm6_tunnel_fini);
MODULE_LICENSE("GPL");
+MODULE_ALIAS_XFRM_TYPE(AF_INET6, XFRM_PROTO_IPV6);
return 0;
}
-static struct seq_operations ipx_seq_interface_ops = {
+static const struct seq_operations ipx_seq_interface_ops = {
.start = ipx_seq_interface_start,
.next = ipx_seq_interface_next,
.stop = ipx_seq_interface_stop,
.show = ipx_seq_interface_show,
};
-static struct seq_operations ipx_seq_route_ops = {
+static const struct seq_operations ipx_seq_route_ops = {
.start = ipx_seq_route_start,
.next = ipx_seq_route_next,
.stop = ipx_seq_route_stop,
.show = ipx_seq_route_show,
};
-static struct seq_operations ipx_seq_socket_ops = {
+static const struct seq_operations ipx_seq_socket_ops = {
.start = ipx_seq_socket_start,
.next = ipx_seq_socket_next,
.stop = ipx_seq_interface_stop,
irda-y := iriap.o iriap_event.o irlmp.o irlmp_event.o irlmp_frame.o \
irlap.o irlap_event.o irlap_frame.o timer.o qos.o irqueue.o \
irttp.o irda_device.o irias_object.o wrapper.o af_irda.o \
- discovery.o parameters.o irmod.o
+ discovery.o parameters.o irnetlink.o irmod.o
irda-$(CONFIG_PROC_FS) += irproc.o
irda-$(CONFIG_SYSCTL) += irsysctl.o
return 0;
}
-static struct seq_operations discovery_seq_ops = {
+static const struct seq_operations discovery_seq_ops = {
.start = discovery_seq_start,
.next = discovery_seq_next,
.stop = discovery_seq_stop,
return 0;
}
-static struct seq_operations ircomm_seq_ops = {
+static const struct seq_operations ircomm_seq_ops = {
.start = ircomm_seq_start,
.next = ircomm_seq_next,
.stop = ircomm_seq_stop,
return 0;
}
-static struct seq_operations irias_seq_ops = {
+static const struct seq_operations irias_seq_ops = {
.start = irias_seq_start,
.next = irias_seq_next,
.stop = irias_seq_stop,
return 0;
}
-static struct seq_operations irlan_seq_ops = {
+static const struct seq_operations irlan_seq_ops = {
.start = irlan_seq_start,
.next = irlan_seq_next,
.stop = irlan_seq_stop,
return 0;
}
-static struct seq_operations irlap_seq_ops = {
+static const struct seq_operations irlap_seq_ops = {
.start = irlap_seq_start,
.next = irlap_seq_next,
.stop = irlap_seq_stop,
irlap_insert_info(self, skb);
+ if (unlikely(self->mode & IRDA_MODE_MONITOR)) {
+ IRDA_DEBUG(3, "%s(): %s is in monitor mode\n", __FUNCTION__,
+ self->netdev->name);
+ dev_kfree_skb(skb);
+ return;
+ }
+
dev_queue_xmit(skb);
}
return 0;
}
-static struct seq_operations irlmp_seq_ops = {
+static const struct seq_operations irlmp_seq_ops = {
.start = irlmp_seq_start,
.next = irlmp_seq_next,
.stop = irlmp_seq_stop,
*/
static int __init irda_init(void)
{
+ int ret = 0;
+
IRDA_DEBUG(0, "%s()\n", __FUNCTION__);
/* Lower layer of the stack */
irlmp_init();
irlap_init();
+ /* Driver/dongle support */
+ irda_device_init();
+
/* Higher layers of the stack */
iriap_init();
irttp_init();
- irsock_init();
+ ret = irsock_init();
+ if (ret < 0)
+ goto out_err_1;
/* Add IrDA packet type (Start receiving packets) */
dev_add_pack(&irda_packet_type);
irda_proc_register();
#endif
#ifdef CONFIG_SYSCTL
- irda_sysctl_register();
+ ret = irda_sysctl_register();
+ if (ret < 0)
+ goto out_err_2;
#endif
- /* Driver/dongle support */
- irda_device_init();
+ ret = irda_nl_register();
+ if (ret < 0)
+ goto out_err_3;
return 0;
+
+ out_err_3:
+#ifdef CONFIG_SYSCTL
+ irda_sysctl_unregister();
+#endif
+ out_err_2:
+#ifdef CONFIG_PROC_FS
+ irda_proc_unregister();
+#endif
+
+ /* Remove IrDA packet type (stop receiving packets) */
+ dev_remove_pack(&irda_packet_type);
+
+ /* Remove higher layers */
+ irsock_cleanup();
+ out_err_1:
+ irttp_cleanup();
+ iriap_cleanup();
+
+ /* Remove lower layers */
+ irda_device_cleanup();
+ irlap_cleanup(); /* Must be done before irlmp_cleanup()! DB */
+
+ /* Remove middle layer */
+ irlmp_cleanup();
+
+
+ return ret;
}
/*
static void __exit irda_cleanup(void)
{
/* Remove External APIs */
+ irda_nl_unregister();
+
#ifdef CONFIG_SYSCTL
irda_sysctl_unregister();
#endif
--- /dev/null
+/*
+ * IrDA netlink layer, for stack configuration.
+ *
+ * Copyright (c) 2007 Samuel Ortiz <samuel@sortiz>
+ *
+ * Partly based on the 802.11 nelink implementation
+ * (see net/wireless/nl80211.c) which is:
+ * Copyright 2006 Johannes Berg <johannes@sipsolutions.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/socket.h>
+#include <linux/irda.h>
+#include <net/sock.h>
+#include <net/irda/irda.h>
+#include <net/irda/irlap.h>
+#include <net/genetlink.h>
+
+
+
+static struct genl_family irda_nl_family = {
+ .id = GENL_ID_GENERATE,
+ .name = IRDA_NL_NAME,
+ .hdrsize = 0,
+ .version = IRDA_NL_VERSION,
+ .maxattr = IRDA_NL_CMD_MAX,
+};
+
+static struct net_device * ifname_to_netdev(struct genl_info *info)
+{
+ char * ifname;
+
+ if (!info->attrs[IRDA_NL_ATTR_IFNAME])
+ return NULL;
+
+ ifname = nla_data(info->attrs[IRDA_NL_ATTR_IFNAME]);
+
+ IRDA_DEBUG(5, "%s(): Looking for %s\n", __FUNCTION__, ifname);
+
+ return dev_get_by_name(ifname);
+}
+
+static int irda_nl_set_mode(struct sk_buff *skb, struct genl_info *info)
+{
+ struct net_device * dev;
+ struct irlap_cb * irlap;
+ u32 mode;
+
+ if (!info->attrs[IRDA_NL_ATTR_MODE])
+ return -EINVAL;
+
+ mode = nla_get_u32(info->attrs[IRDA_NL_ATTR_MODE]);
+
+ IRDA_DEBUG(5, "%s(): Switching to mode: %d\n", __FUNCTION__, mode);
+
+ dev = ifname_to_netdev(info);
+ if (!dev)
+ return -ENODEV;
+
+ irlap = (struct irlap_cb *)dev->atalk_ptr;
+ if (!irlap) {
+ dev_put(dev);
+ return -ENODEV;
+ }
+
+ irlap->mode = mode;
+
+ dev_put(dev);
+
+ return 0;
+}
+
+static int irda_nl_get_mode(struct sk_buff *skb, struct genl_info *info)
+{
+ struct net_device * dev;
+ struct irlap_cb * irlap;
+ struct sk_buff *msg;
+ void *hdr;
+ int ret = -ENOBUFS;
+
+ dev = ifname_to_netdev(info);
+ if (!dev)
+ return -ENODEV;
+
+ msg = nlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ if (!msg) {
+ dev_put(dev);
+ return -ENOMEM;
+ }
+
+ irlap = (struct irlap_cb *)dev->atalk_ptr;
+ if (!irlap) {
+ ret = -ENODEV;
+ goto err_out;
+ }
+
+ hdr = genlmsg_put(msg, info->snd_pid, info->snd_seq,
+ &irda_nl_family, 0, IRDA_NL_CMD_GET_MODE);
+ if (IS_ERR(hdr)) {
+ ret = PTR_ERR(hdr);
+ goto err_out;
+ }
+
+ if(nla_put_string(msg, IRDA_NL_ATTR_IFNAME,
+ dev->name));
+ goto err_out;
+
+ if(nla_put_u32(msg, IRDA_NL_ATTR_MODE, irlap->mode))
+ goto err_out;
+
+ genlmsg_end(msg, hdr);
+
+ return genlmsg_unicast(msg, info->snd_pid);
+
+ err_out:
+ nlmsg_free(msg);
+ dev_put(dev);
+
+ return ret;
+}
+
+static struct nla_policy irda_nl_policy[IRDA_NL_ATTR_MAX + 1] = {
+ [IRDA_NL_ATTR_IFNAME] = { .type = NLA_NUL_STRING,
+ .len = IFNAMSIZ-1 },
+ [IRDA_NL_ATTR_MODE] = { .type = NLA_U32 },
+};
+
+static struct genl_ops irda_nl_ops[] = {
+ {
+ .cmd = IRDA_NL_CMD_SET_MODE,
+ .doit = irda_nl_set_mode,
+ .policy = irda_nl_policy,
+ .flags = GENL_ADMIN_PERM,
+ },
+ {
+ .cmd = IRDA_NL_CMD_GET_MODE,
+ .doit = irda_nl_get_mode,
+ .policy = irda_nl_policy,
+ /* can be retrieved by unprivileged users */
+ },
+
+};
+
+int irda_nl_register(void)
+{
+ int err, i;
+
+ err = genl_register_family(&irda_nl_family);
+ if (err)
+ return err;
+
+ for (i = 0; i < ARRAY_SIZE(irda_nl_ops); i++) {
+ err = genl_register_ops(&irda_nl_family, &irda_nl_ops[i]);
+ if (err)
+ goto err_out;
+ }
+ return 0;
+ err_out:
+ genl_unregister_family(&irda_nl_family);
+ return err;
+}
+
+void irda_nl_unregister(void)
+{
+ genl_unregister_family(&irda_nl_family);
+}
/************************** LMP CALLBACKS **************************/
/* Everything is happily mixed up. Waiting for next clean up - Jean II */
+/*
+ * Initialization, that has to be done on new tsap
+ * instance allocation and on duplication
+ */
+static void irttp_init_tsap(struct tsap_cb *tsap)
+{
+ spin_lock_init(&tsap->lock);
+ init_timer(&tsap->todo_timer);
+
+ skb_queue_head_init(&tsap->rx_queue);
+ skb_queue_head_init(&tsap->tx_queue);
+ skb_queue_head_init(&tsap->rx_fragments);
+}
+
/*
* Function irttp_open_tsap (stsap, notify)
*
IRDA_DEBUG(0, "%s(), unable to kmalloc!\n", __FUNCTION__);
return NULL;
}
- spin_lock_init(&self->lock);
+
+ /* Initialize internal objects */
+ irttp_init_tsap(self);
/* Initialise todo timer */
- init_timer(&self->todo_timer);
self->todo_timer.data = (unsigned long) self;
self->todo_timer.function = &irttp_todo_expired;
self->magic = TTP_TSAP_MAGIC;
self->connected = FALSE;
- skb_queue_head_init(&self->rx_queue);
- skb_queue_head_init(&self->tx_queue);
- skb_queue_head_init(&self->rx_fragments);
/*
* Create LSAP at IrLMP layer
*/
/* Not everything should be copied */
new->notify.instance = instance;
- spin_lock_init(&new->lock);
- init_timer(&new->todo_timer);
- skb_queue_head_init(&new->rx_queue);
- skb_queue_head_init(&new->tx_queue);
- skb_queue_head_init(&new->rx_fragments);
+ /* Initialize internal objects */
+ irttp_init_tsap(new);
/* This is locked */
hashbin_insert(irttp->tsaps, (irda_queue_t *) new, (long) new, NULL);
return 0;
}
-static struct seq_operations irttp_seq_ops = {
+static const struct seq_operations irttp_seq_ops = {
.start = irttp_seq_start,
.next = irttp_seq_next,
.stop = irttp_seq_stop,
return 0;
}
-static struct seq_operations llc_seq_socket_ops = {
+static const struct seq_operations llc_seq_socket_ops = {
.start = llc_seq_start,
.next = llc_seq_next,
.stop = llc_seq_stop,
.show = llc_seq_socket_show,
};
-static struct seq_operations llc_seq_core_ops = {
+static const struct seq_operations llc_seq_core_ops = {
.start = llc_seq_start,
.next = llc_seq_next,
.stop = llc_seq_stop,
}
+static int ieee80211_ioctl_giwrate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *rate, char *extra)
+{
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct sta_info *sta;
+ struct ieee80211_sub_if_data *sdata;
+
+ sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+ if (sdata->type == IEEE80211_IF_TYPE_STA)
+ sta = sta_info_get(local, sdata->u.sta.bssid);
+ else
+ return -EOPNOTSUPP;
+ if (!sta)
+ return -ENODEV;
+ if (sta->txrate < local->oper_hw_mode->num_rates)
+ rate->value = local->oper_hw_mode->rates[sta->txrate].rate * 100000;
+ else
+ rate->value = 0;
+ sta_info_put(sta);
+ return 0;
+}
+
static int ieee80211_ioctl_siwrts(struct net_device *dev,
struct iw_request_info *info,
struct iw_param *rts, char *extra)
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* -- hole -- */
(iw_handler) NULL, /* SIOCSIWRATE */
- (iw_handler) NULL, /* SIOCGIWRATE */
+ (iw_handler) ieee80211_ioctl_giwrate, /* SIOCGIWRATE */
(iw_handler) ieee80211_ioctl_siwrts, /* SIOCSIWRTS */
(iw_handler) ieee80211_ioctl_giwrts, /* SIOCGIWRTS */
(iw_handler) ieee80211_ioctl_siwfrag, /* SIOCSIWFRAG */
int i;
sta->txrate = 0;
mode = local->oper_hw_mode;
- /* TODO: what is a good starting rate for STA? About middle? Maybe not
- * the lowest or the highest rate.. Could consider using RSSI from
- * previous packets? Need to have IEEE 802.1X auth succeed immediately
- * after assoc.. */
+ /* TODO: This routine should consider using RSSI from previous packets
+ * as we need to have IEEE 802.1X auth succeed immediately after assoc..
+ * Until that method is implemented, we will use the lowest supported rate
+ * as a workaround, */
for (i = 0; i < mode->num_rates; i++) {
if ((sta->supp_rates & BIT(i)) &&
- (mode->rates[i].flags & IEEE80211_RATE_SUPPORTED))
+ (mode->rates[i].flags & IEEE80211_RATE_SUPPORTED)) {
sta->txrate = i;
+ break;
+ }
}
}
If you want to compile it as a module, say M here and read
<file:Documentation/kbuild/modules.txt>. If unsure, say `N'.
+config NETFILTER_XT_TARGET_TRACE
+ tristate '"TRACE" target support'
+ depends on NETFILTER_XTABLES
+ depends on IP_NF_RAW || IP6_NF_RAW
+ help
+ The TRACE target allows you to mark packets so that the kernel
+ will log every rule which match the packets as those traverse
+ the tables, chains, rules.
+
+ If you want to compile it as a module, say M here and read
+ <file:Documentation/modules.txt>. If unsure, say `N'.
+
config NETFILTER_XT_TARGET_SECMARK
tristate '"SECMARK" target support'
depends on NETFILTER_XTABLES && NETWORK_SECMARK
To compile it as a module, choose M here. If unsure, say N.
+config NETFILTER_XT_MATCH_U32
+ tristate '"u32" match support'
+ depends on NETFILTER_XTABLES
+ ---help---
+ u32 allows you to extract quantities of up to 4 bytes from a packet,
+ AND them with specified masks, shift them by specified amounts and
+ test whether the results are in any of a set of specified ranges.
+ The specification of what to extract is general enough to skip over
+ headers with lengths stored in the packet, as in IP or TCP header
+ lengths.
+
+ Details and examples are in the kernel module source.
+
config NETFILTER_XT_MATCH_HASHLIMIT
tristate '"hashlimit" match support'
depends on NETFILTER_XTABLES && (IP6_NF_IPTABLES || IP6_NF_IPTABLES=n)
netfilter-objs := core.o nf_log.o nf_queue.o nf_sockopt.o
-nf_conntrack-y := nf_conntrack_core.o nf_conntrack_standalone.o nf_conntrack_expect.o nf_conntrack_helper.o nf_conntrack_proto.o nf_conntrack_l3proto_generic.o nf_conntrack_proto_generic.o nf_conntrack_proto_tcp.o nf_conntrack_proto_udp.o
+nf_conntrack-y := nf_conntrack_core.o nf_conntrack_standalone.o nf_conntrack_expect.o nf_conntrack_helper.o nf_conntrack_proto.o nf_conntrack_l3proto_generic.o nf_conntrack_proto_generic.o nf_conntrack_proto_tcp.o nf_conntrack_proto_udp.o nf_conntrack_extend.o
nf_conntrack-$(CONFIG_NF_CONNTRACK_EVENTS) += nf_conntrack_ecache.o
obj-$(CONFIG_NETFILTER) = netfilter.o
obj-$(CONFIG_NETFILTER_XT_TARGET_NFQUEUE) += xt_NFQUEUE.o
obj-$(CONFIG_NETFILTER_XT_TARGET_NFLOG) += xt_NFLOG.o
obj-$(CONFIG_NETFILTER_XT_TARGET_NOTRACK) += xt_NOTRACK.o
+obj-$(CONFIG_NETFILTER_XT_TARGET_TRACE) += xt_TRACE.o
obj-$(CONFIG_NETFILTER_XT_TARGET_SECMARK) += xt_SECMARK.o
obj-$(CONFIG_NETFILTER_XT_TARGET_TCPMSS) += xt_TCPMSS.o
obj-$(CONFIG_NETFILTER_XT_TARGET_CONNSECMARK) += xt_CONNSECMARK.o
obj-$(CONFIG_NETFILTER_XT_MATCH_STRING) += xt_string.o
obj-$(CONFIG_NETFILTER_XT_MATCH_TCPMSS) += xt_tcpmss.o
obj-$(CONFIG_NETFILTER_XT_MATCH_PHYSDEV) += xt_physdev.o
+obj-$(CONFIG_NETFILTER_XT_MATCH_U32) += xt_u32.o
obj-$(CONFIG_NETFILTER_XT_MATCH_HASHLIMIT) += xt_hashlimit.o
return 0;
/* Not exclusive use of packet? Must copy. */
- if (skb_shared(*pskb) || skb_cloned(*pskb))
+ if (skb_cloned(*pskb) && !skb_clone_writable(*pskb, writable_len))
+ goto copy_skb;
+ if (skb_shared(*pskb))
goto copy_skb;
return pskb_may_pull(*pskb, writable_len);
{
__be32 diff[] = { ~from, to };
if (skb->ip_summed != CHECKSUM_PARTIAL) {
- *sum = csum_fold(csum_partial((char *)diff, sizeof(diff),
+ *sum = csum_fold(csum_partial(diff, sizeof(diff),
~csum_unfold(*sum)));
if (skb->ip_summed == CHECKSUM_COMPLETE && pseudohdr)
- skb->csum = ~csum_partial((char *)diff, sizeof(diff),
+ skb->csum = ~csum_partial(diff, sizeof(diff),
~skb->csum);
} else if (pseudohdr)
- *sum = ~csum_fold(csum_partial((char *)diff, sizeof(diff),
+ *sum = ~csum_fold(csum_partial(diff, sizeof(diff),
csum_unfold(*sum)));
}
EXPORT_SYMBOL(nf_proto_csum_replace4);
if (port == 0 || len > 5)
break;
- exp = nf_conntrack_expect_alloc(ct);
+ exp = nf_ct_expect_alloc(ct);
if (exp == NULL) {
ret = NF_DROP;
goto out;
}
tuple = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
- nf_conntrack_expect_init(exp, family,
- &tuple->src.u3, &tuple->dst.u3,
- IPPROTO_TCP, NULL, &port);
+ nf_ct_expect_init(exp, family, &tuple->src.u3, &tuple->dst.u3,
+ IPPROTO_TCP, NULL, &port);
nf_nat_amanda = rcu_dereference(nf_nat_amanda_hook);
if (nf_nat_amanda && ct->status & IPS_NAT_MASK)
ret = nf_nat_amanda(pskb, ctinfo, off - dataoff,
len, exp);
- else if (nf_conntrack_expect_related(exp) != 0)
+ else if (nf_ct_expect_related(exp) != 0)
ret = NF_DROP;
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
}
out:
.tuple.src.l3num = AF_INET,
.tuple.src.u.udp.port = __constant_htons(10080),
.tuple.dst.protonum = IPPROTO_UDP,
- .mask.src.l3num = 0xFFFF,
- .mask.src.u.udp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
},
{
.name = "amanda",
.tuple.src.l3num = AF_INET6,
.tuple.src.u.udp.port = __constant_htons(10080),
.tuple.dst.protonum = IPPROTO_UDP,
- .mask.src.l3num = 0xFFFF,
- .mask.src.u.udp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
},
};
#include <net/netfilter/nf_conntrack_expect.h>
#include <net/netfilter/nf_conntrack_helper.h>
#include <net/netfilter/nf_conntrack_core.h>
+#include <net/netfilter/nf_conntrack_extend.h>
#define NF_CONNTRACK_VERSION "0.5.0"
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
DEFINE_RWLOCK(nf_conntrack_lock);
EXPORT_SYMBOL_GPL(nf_conntrack_lock);
atomic_t nf_conntrack_count = ATOMIC_INIT(0);
EXPORT_SYMBOL_GPL(nf_conntrack_count);
-void (*nf_conntrack_destroyed)(struct nf_conn *conntrack);
-EXPORT_SYMBOL_GPL(nf_conntrack_destroyed);
-
unsigned int nf_conntrack_htable_size __read_mostly;
EXPORT_SYMBOL_GPL(nf_conntrack_htable_size);
int nf_conntrack_max __read_mostly;
EXPORT_SYMBOL_GPL(nf_conntrack_max);
-struct list_head *nf_conntrack_hash __read_mostly;
+struct hlist_head *nf_conntrack_hash __read_mostly;
EXPORT_SYMBOL_GPL(nf_conntrack_hash);
struct nf_conn nf_conntrack_untracked __read_mostly;
EXPORT_SYMBOL_GPL(nf_conntrack_untracked);
unsigned int nf_ct_log_invalid __read_mostly;
-LIST_HEAD(unconfirmed);
+HLIST_HEAD(unconfirmed);
static int nf_conntrack_vmalloc __read_mostly;
-
+static struct kmem_cache *nf_conntrack_cachep __read_mostly;
static unsigned int nf_conntrack_next_id;
DEFINE_PER_CPU(struct ip_conntrack_stat, nf_conntrack_stat);
EXPORT_PER_CPU_SYMBOL(nf_conntrack_stat);
-/*
- * This scheme offers various size of "struct nf_conn" dependent on
- * features(helper, nat, ...)
- */
-
-#define NF_CT_FEATURES_NAMELEN 256
-static struct {
- /* name of slab cache. printed in /proc/slabinfo */
- char *name;
-
- /* size of slab cache */
- size_t size;
-
- /* slab cache pointer */
- struct kmem_cache *cachep;
-
- /* allocated slab cache + modules which uses this slab cache */
- int use;
-
-} nf_ct_cache[NF_CT_F_NUM];
-
-/* protect members of nf_ct_cache except of "use" */
-DEFINE_RWLOCK(nf_ct_cache_lock);
-
-/* This avoids calling kmem_cache_create() with same name simultaneously */
-static DEFINE_MUTEX(nf_ct_cache_mutex);
-
static int nf_conntrack_hash_rnd_initted;
static unsigned int nf_conntrack_hash_rnd;
nf_conntrack_hash_rnd);
}
-int nf_conntrack_register_cache(u_int32_t features, const char *name,
- size_t size)
-{
- int ret = 0;
- char *cache_name;
- struct kmem_cache *cachep;
-
- DEBUGP("nf_conntrack_register_cache: features=0x%x, name=%s, size=%d\n",
- features, name, size);
-
- if (features < NF_CT_F_BASIC || features >= NF_CT_F_NUM) {
- DEBUGP("nf_conntrack_register_cache: invalid features.: 0x%x\n",
- features);
- return -EINVAL;
- }
-
- mutex_lock(&nf_ct_cache_mutex);
-
- write_lock_bh(&nf_ct_cache_lock);
- /* e.g: multiple helpers are loaded */
- if (nf_ct_cache[features].use > 0) {
- DEBUGP("nf_conntrack_register_cache: already resisterd.\n");
- if ((!strncmp(nf_ct_cache[features].name, name,
- NF_CT_FEATURES_NAMELEN))
- && nf_ct_cache[features].size == size) {
- DEBUGP("nf_conntrack_register_cache: reusing.\n");
- nf_ct_cache[features].use++;
- ret = 0;
- } else
- ret = -EBUSY;
-
- write_unlock_bh(&nf_ct_cache_lock);
- mutex_unlock(&nf_ct_cache_mutex);
- return ret;
- }
- write_unlock_bh(&nf_ct_cache_lock);
-
- /*
- * The memory space for name of slab cache must be alive until
- * cache is destroyed.
- */
- cache_name = kmalloc(sizeof(char)*NF_CT_FEATURES_NAMELEN, GFP_ATOMIC);
- if (cache_name == NULL) {
- DEBUGP("nf_conntrack_register_cache: can't alloc cache_name\n");
- ret = -ENOMEM;
- goto out_up_mutex;
- }
-
- if (strlcpy(cache_name, name, NF_CT_FEATURES_NAMELEN)
- >= NF_CT_FEATURES_NAMELEN) {
- printk("nf_conntrack_register_cache: name too long\n");
- ret = -EINVAL;
- goto out_free_name;
- }
-
- cachep = kmem_cache_create(cache_name, size, 0, 0,
- NULL, NULL);
- if (!cachep) {
- printk("nf_conntrack_register_cache: Can't create slab cache "
- "for the features = 0x%x\n", features);
- ret = -ENOMEM;
- goto out_free_name;
- }
-
- write_lock_bh(&nf_ct_cache_lock);
- nf_ct_cache[features].use = 1;
- nf_ct_cache[features].size = size;
- nf_ct_cache[features].cachep = cachep;
- nf_ct_cache[features].name = cache_name;
- write_unlock_bh(&nf_ct_cache_lock);
-
- goto out_up_mutex;
-
-out_free_name:
- kfree(cache_name);
-out_up_mutex:
- mutex_unlock(&nf_ct_cache_mutex);
- return ret;
-}
-EXPORT_SYMBOL_GPL(nf_conntrack_register_cache);
-
-/* FIXME: In the current, only nf_conntrack_cleanup() can call this function. */
-void nf_conntrack_unregister_cache(u_int32_t features)
-{
- struct kmem_cache *cachep;
- char *name;
-
- /*
- * This assures that kmem_cache_create() isn't called before destroying
- * slab cache.
- */
- DEBUGP("nf_conntrack_unregister_cache: 0x%04x\n", features);
- mutex_lock(&nf_ct_cache_mutex);
-
- write_lock_bh(&nf_ct_cache_lock);
- if (--nf_ct_cache[features].use > 0) {
- write_unlock_bh(&nf_ct_cache_lock);
- mutex_unlock(&nf_ct_cache_mutex);
- return;
- }
- cachep = nf_ct_cache[features].cachep;
- name = nf_ct_cache[features].name;
- nf_ct_cache[features].cachep = NULL;
- nf_ct_cache[features].name = NULL;
- nf_ct_cache[features].size = 0;
- write_unlock_bh(&nf_ct_cache_lock);
-
- synchronize_net();
-
- kmem_cache_destroy(cachep);
- kfree(name);
-
- mutex_unlock(&nf_ct_cache_mutex);
-}
-EXPORT_SYMBOL_GPL(nf_conntrack_unregister_cache);
-
int
nf_ct_get_tuple(const struct sk_buff *skb,
unsigned int nhoff,
static void
clean_from_lists(struct nf_conn *ct)
{
- DEBUGP("clean_from_lists(%p)\n", ct);
- list_del(&ct->tuplehash[IP_CT_DIR_ORIGINAL].list);
- list_del(&ct->tuplehash[IP_CT_DIR_REPLY].list);
+ pr_debug("clean_from_lists(%p)\n", ct);
+ hlist_del(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode);
+ hlist_del(&ct->tuplehash[IP_CT_DIR_REPLY].hnode);
/* Destroy all pending expectations */
nf_ct_remove_expectations(ct);
{
struct nf_conn *ct = (struct nf_conn *)nfct;
struct nf_conntrack_l4proto *l4proto;
- typeof(nf_conntrack_destroyed) destroyed;
- DEBUGP("destroy_conntrack(%p)\n", ct);
+ pr_debug("destroy_conntrack(%p)\n", ct);
NF_CT_ASSERT(atomic_read(&nfct->use) == 0);
NF_CT_ASSERT(!timer_pending(&ct->timeout));
if (l4proto && l4proto->destroy)
l4proto->destroy(ct);
- destroyed = rcu_dereference(nf_conntrack_destroyed);
- if (destroyed)
- destroyed(ct);
+ nf_ct_ext_destroy(ct);
rcu_read_unlock();
/* We overload first tuple to link into unconfirmed list. */
if (!nf_ct_is_confirmed(ct)) {
- BUG_ON(list_empty(&ct->tuplehash[IP_CT_DIR_ORIGINAL].list));
- list_del(&ct->tuplehash[IP_CT_DIR_ORIGINAL].list);
+ BUG_ON(hlist_unhashed(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode));
+ hlist_del(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode);
}
NF_CT_STAT_INC(delete);
if (ct->master)
nf_ct_put(ct->master);
- DEBUGP("destroy_conntrack: returning ct=%p to slab\n", ct);
+ pr_debug("destroy_conntrack: returning ct=%p to slab\n", ct);
nf_conntrack_free(ct);
}
const struct nf_conn *ignored_conntrack)
{
struct nf_conntrack_tuple_hash *h;
+ struct hlist_node *n;
unsigned int hash = hash_conntrack(tuple);
- list_for_each_entry(h, &nf_conntrack_hash[hash], list) {
+ hlist_for_each_entry(h, n, &nf_conntrack_hash[hash], hnode) {
if (nf_ct_tuplehash_to_ctrack(h) != ignored_conntrack &&
nf_ct_tuple_equal(tuple, &h->tuple)) {
NF_CT_STAT_INC(found);
/* Find a connection corresponding to a tuple. */
struct nf_conntrack_tuple_hash *
-nf_conntrack_find_get(const struct nf_conntrack_tuple *tuple,
- const struct nf_conn *ignored_conntrack)
+nf_conntrack_find_get(const struct nf_conntrack_tuple *tuple)
{
struct nf_conntrack_tuple_hash *h;
read_lock_bh(&nf_conntrack_lock);
- h = __nf_conntrack_find(tuple, ignored_conntrack);
+ h = __nf_conntrack_find(tuple, NULL);
if (h)
atomic_inc(&nf_ct_tuplehash_to_ctrack(h)->ct_general.use);
read_unlock_bh(&nf_conntrack_lock);
unsigned int repl_hash)
{
ct->id = ++nf_conntrack_next_id;
- list_add(&ct->tuplehash[IP_CT_DIR_ORIGINAL].list,
- &nf_conntrack_hash[hash]);
- list_add(&ct->tuplehash[IP_CT_DIR_REPLY].list,
- &nf_conntrack_hash[repl_hash]);
+ hlist_add_head(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode,
+ &nf_conntrack_hash[hash]);
+ hlist_add_head(&ct->tuplehash[IP_CT_DIR_REPLY].hnode,
+ &nf_conntrack_hash[repl_hash]);
}
void nf_conntrack_hash_insert(struct nf_conn *ct)
struct nf_conntrack_tuple_hash *h;
struct nf_conn *ct;
struct nf_conn_help *help;
+ struct hlist_node *n;
enum ip_conntrack_info ctinfo;
ct = nf_ct_get(*pskb, &ctinfo);
/* No external references means noone else could have
confirmed us. */
NF_CT_ASSERT(!nf_ct_is_confirmed(ct));
- DEBUGP("Confirming conntrack %p\n", ct);
+ pr_debug("Confirming conntrack %p\n", ct);
write_lock_bh(&nf_conntrack_lock);
/* See if there's one in the list already, including reverse:
NAT could have grabbed it without realizing, since we're
not in the hash. If there is, we lost race. */
- list_for_each_entry(h, &nf_conntrack_hash[hash], list)
+ hlist_for_each_entry(h, n, &nf_conntrack_hash[hash], hnode)
if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
&h->tuple))
goto out;
- list_for_each_entry(h, &nf_conntrack_hash[repl_hash], list)
+ hlist_for_each_entry(h, n, &nf_conntrack_hash[repl_hash], hnode)
if (nf_ct_tuple_equal(&ct->tuplehash[IP_CT_DIR_REPLY].tuple,
&h->tuple))
goto out;
/* Remove from unconfirmed list */
- list_del(&ct->tuplehash[IP_CT_DIR_ORIGINAL].list);
+ hlist_del(&ct->tuplehash[IP_CT_DIR_ORIGINAL].hnode);
__nf_conntrack_hash_insert(ct, hash, repl_hash);
/* Timer relative to confirmation time, not original
}
EXPORT_SYMBOL_GPL(nf_conntrack_tuple_taken);
+#define NF_CT_EVICTION_RANGE 8
+
/* There's a small race here where we may free a just-assured
connection. Too bad: we're in trouble anyway. */
-static int early_drop(struct list_head *chain)
+static int early_drop(unsigned int hash)
{
- /* Traverse backwards: gives us oldest, which is roughly LRU */
+ /* Use oldest entry, which is roughly LRU */
struct nf_conntrack_tuple_hash *h;
struct nf_conn *ct = NULL, *tmp;
+ struct hlist_node *n;
+ unsigned int i, cnt = 0;
int dropped = 0;
read_lock_bh(&nf_conntrack_lock);
- list_for_each_entry_reverse(h, chain, list) {
- tmp = nf_ct_tuplehash_to_ctrack(h);
- if (!test_bit(IPS_ASSURED_BIT, &tmp->status)) {
- ct = tmp;
- atomic_inc(&ct->ct_general.use);
- break;
+ for (i = 0; i < nf_conntrack_htable_size; i++) {
+ hlist_for_each_entry(h, n, &nf_conntrack_hash[hash], hnode) {
+ tmp = nf_ct_tuplehash_to_ctrack(h);
+ if (!test_bit(IPS_ASSURED_BIT, &tmp->status))
+ ct = tmp;
+ cnt++;
}
+ if (ct || cnt >= NF_CT_EVICTION_RANGE)
+ break;
+ hash = (hash + 1) % nf_conntrack_htable_size;
}
+ if (ct)
+ atomic_inc(&ct->ct_general.use);
read_unlock_bh(&nf_conntrack_lock);
if (!ct)
return dropped;
}
-static struct nf_conn *
-__nf_conntrack_alloc(const struct nf_conntrack_tuple *orig,
- const struct nf_conntrack_tuple *repl,
- const struct nf_conntrack_l3proto *l3proto,
- u_int32_t features)
+struct nf_conn *nf_conntrack_alloc(const struct nf_conntrack_tuple *orig,
+ const struct nf_conntrack_tuple *repl)
{
struct nf_conn *conntrack = NULL;
- struct nf_conntrack_helper *helper;
if (unlikely(!nf_conntrack_hash_rnd_initted)) {
get_random_bytes(&nf_conntrack_hash_rnd, 4);
if (nf_conntrack_max
&& atomic_read(&nf_conntrack_count) > nf_conntrack_max) {
unsigned int hash = hash_conntrack(orig);
- /* Try dropping from this hash chain. */
- if (!early_drop(&nf_conntrack_hash[hash])) {
+ if (!early_drop(hash)) {
atomic_dec(&nf_conntrack_count);
if (net_ratelimit())
printk(KERN_WARNING
}
}
- /* find features needed by this conntrack. */
- features |= l3proto->get_features(orig);
-
- /* FIXME: protect helper list per RCU */
- read_lock_bh(&nf_conntrack_lock);
- helper = __nf_ct_helper_find(repl);
- /* NAT might want to assign a helper later */
- if (helper || features & NF_CT_F_NAT)
- features |= NF_CT_F_HELP;
- read_unlock_bh(&nf_conntrack_lock);
-
- DEBUGP("nf_conntrack_alloc: features=0x%x\n", features);
-
- read_lock_bh(&nf_ct_cache_lock);
-
- if (unlikely(!nf_ct_cache[features].use)) {
- DEBUGP("nf_conntrack_alloc: not supported features = 0x%x\n",
- features);
- goto out;
- }
-
- conntrack = kmem_cache_alloc(nf_ct_cache[features].cachep, GFP_ATOMIC);
+ conntrack = kmem_cache_zalloc(nf_conntrack_cachep, GFP_ATOMIC);
if (conntrack == NULL) {
- DEBUGP("nf_conntrack_alloc: Can't alloc conntrack from cache\n");
- goto out;
+ pr_debug("nf_conntrack_alloc: Can't alloc conntrack.\n");
+ atomic_dec(&nf_conntrack_count);
+ return ERR_PTR(-ENOMEM);
}
- memset(conntrack, 0, nf_ct_cache[features].size);
- conntrack->features = features;
atomic_set(&conntrack->ct_general.use, 1);
conntrack->tuplehash[IP_CT_DIR_ORIGINAL].tuple = *orig;
conntrack->tuplehash[IP_CT_DIR_REPLY].tuple = *repl;
/* Don't set timer yet: wait for confirmation */
setup_timer(&conntrack->timeout, death_by_timeout,
(unsigned long)conntrack);
- read_unlock_bh(&nf_ct_cache_lock);
- return conntrack;
-out:
- read_unlock_bh(&nf_ct_cache_lock);
- atomic_dec(&nf_conntrack_count);
return conntrack;
}
-
-struct nf_conn *nf_conntrack_alloc(const struct nf_conntrack_tuple *orig,
- const struct nf_conntrack_tuple *repl)
-{
- struct nf_conntrack_l3proto *l3proto;
- struct nf_conn *ct;
-
- rcu_read_lock();
- l3proto = __nf_ct_l3proto_find(orig->src.l3num);
- ct = __nf_conntrack_alloc(orig, repl, l3proto, 0);
- rcu_read_unlock();
-
- return ct;
-}
EXPORT_SYMBOL_GPL(nf_conntrack_alloc);
void nf_conntrack_free(struct nf_conn *conntrack)
{
- u_int32_t features = conntrack->features;
- NF_CT_ASSERT(features >= NF_CT_F_BASIC && features < NF_CT_F_NUM);
- DEBUGP("nf_conntrack_free: features = 0x%x, conntrack=%p\n", features,
- conntrack);
- kmem_cache_free(nf_ct_cache[features].cachep, conntrack);
+ nf_ct_ext_free(conntrack);
+ kmem_cache_free(nf_conntrack_cachep, conntrack);
atomic_dec(&nf_conntrack_count);
}
EXPORT_SYMBOL_GPL(nf_conntrack_free);
struct nf_conn_help *help;
struct nf_conntrack_tuple repl_tuple;
struct nf_conntrack_expect *exp;
- u_int32_t features = 0;
if (!nf_ct_invert_tuple(&repl_tuple, tuple, l3proto, l4proto)) {
- DEBUGP("Can't invert tuple.\n");
+ pr_debug("Can't invert tuple.\n");
return NULL;
}
- read_lock_bh(&nf_conntrack_lock);
- exp = __nf_conntrack_expect_find(tuple);
- if (exp && exp->helper)
- features = NF_CT_F_HELP;
- read_unlock_bh(&nf_conntrack_lock);
-
- conntrack = __nf_conntrack_alloc(tuple, &repl_tuple, l3proto, features);
+ conntrack = nf_conntrack_alloc(tuple, &repl_tuple);
if (conntrack == NULL || IS_ERR(conntrack)) {
- DEBUGP("Can't allocate conntrack.\n");
+ pr_debug("Can't allocate conntrack.\n");
return (struct nf_conntrack_tuple_hash *)conntrack;
}
if (!l4proto->new(conntrack, skb, dataoff)) {
nf_conntrack_free(conntrack);
- DEBUGP("init conntrack: can't track with proto module\n");
+ pr_debug("init conntrack: can't track with proto module\n");
return NULL;
}
write_lock_bh(&nf_conntrack_lock);
- exp = find_expectation(tuple);
-
- help = nfct_help(conntrack);
+ exp = nf_ct_find_expectation(tuple);
if (exp) {
- DEBUGP("conntrack: expectation arrives ct=%p exp=%p\n",
- conntrack, exp);
+ pr_debug("conntrack: expectation arrives ct=%p exp=%p\n",
+ conntrack, exp);
/* Welcome, Mr. Bond. We've been expecting you... */
__set_bit(IPS_EXPECTED_BIT, &conntrack->status);
conntrack->master = exp->master;
- if (exp->helper)
- rcu_assign_pointer(help->helper, exp->helper);
+ if (exp->helper) {
+ help = nf_ct_helper_ext_add(conntrack, GFP_ATOMIC);
+ if (help)
+ rcu_assign_pointer(help->helper, exp->helper);
+ }
+
#ifdef CONFIG_NF_CONNTRACK_MARK
conntrack->mark = exp->master->mark;
#endif
nf_conntrack_get(&conntrack->master->ct_general);
NF_CT_STAT_INC(expect_new);
} else {
- if (help) {
- /* not in hash table yet, so not strictly necessary */
- rcu_assign_pointer(help->helper,
- __nf_ct_helper_find(&repl_tuple));
+ struct nf_conntrack_helper *helper;
+
+ helper = __nf_ct_helper_find(&repl_tuple);
+ if (helper) {
+ help = nf_ct_helper_ext_add(conntrack, GFP_ATOMIC);
+ if (help)
+ rcu_assign_pointer(help->helper, helper);
}
NF_CT_STAT_INC(new);
}
/* Overload tuple linked list to put us in unconfirmed list. */
- list_add(&conntrack->tuplehash[IP_CT_DIR_ORIGINAL].list, &unconfirmed);
+ hlist_add_head(&conntrack->tuplehash[IP_CT_DIR_ORIGINAL].hnode,
+ &unconfirmed);
write_unlock_bh(&nf_conntrack_lock);
if (exp) {
if (exp->expectfn)
exp->expectfn(conntrack, exp);
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
}
return &conntrack->tuplehash[IP_CT_DIR_ORIGINAL];
if (!nf_ct_get_tuple(skb, skb_network_offset(skb),
dataoff, l3num, protonum, &tuple, l3proto,
l4proto)) {
- DEBUGP("resolve_normal_ct: Can't get tuple\n");
+ pr_debug("resolve_normal_ct: Can't get tuple\n");
return NULL;
}
/* look for tuple match */
- h = nf_conntrack_find_get(&tuple, NULL);
+ h = nf_conntrack_find_get(&tuple);
if (!h) {
h = init_conntrack(&tuple, l3proto, l4proto, skb, dataoff);
if (!h)
} else {
/* Once we've had two way comms, always ESTABLISHED. */
if (test_bit(IPS_SEEN_REPLY_BIT, &ct->status)) {
- DEBUGP("nf_conntrack_in: normal packet for %p\n", ct);
+ pr_debug("nf_conntrack_in: normal packet for %p\n", ct);
*ctinfo = IP_CT_ESTABLISHED;
} else if (test_bit(IPS_EXPECTED_BIT, &ct->status)) {
- DEBUGP("nf_conntrack_in: related packet for %p\n", ct);
+ pr_debug("nf_conntrack_in: related packet for %p\n",
+ ct);
*ctinfo = IP_CT_RELATED;
} else {
- DEBUGP("nf_conntrack_in: new packet for %p\n", ct);
+ pr_debug("nf_conntrack_in: new packet for %p\n", ct);
*ctinfo = IP_CT_NEW;
}
*set_reply = 0;
l3proto = __nf_ct_l3proto_find((u_int16_t)pf);
if ((ret = l3proto->prepare(pskb, hooknum, &dataoff, &protonum)) <= 0) {
- DEBUGP("not prepared to track yet or error occured\n");
+ pr_debug("not prepared to track yet or error occured\n");
return -ret;
}
if (ret < 0) {
/* Invalid: inverse of the return code tells
* the netfilter core what to do */
- DEBUGP("nf_conntrack_in: Can't track with proto module\n");
+ pr_debug("nf_conntrack_in: Can't track with proto module\n");
nf_conntrack_put((*pskb)->nfct);
(*pskb)->nfct = NULL;
NF_CT_STAT_INC_ATOMIC(invalid);
const struct nf_conntrack_tuple *newreply)
{
struct nf_conn_help *help = nfct_help(ct);
+ struct nf_conntrack_helper *helper;
write_lock_bh(&nf_conntrack_lock);
/* Should be unconfirmed, so not in hash table yet */
NF_CT_ASSERT(!nf_ct_is_confirmed(ct));
- DEBUGP("Altering reply tuple of %p to ", ct);
+ pr_debug("Altering reply tuple of %p to ", ct);
NF_CT_DUMP_TUPLE(newreply);
ct->tuplehash[IP_CT_DIR_REPLY].tuple = *newreply;
- if (!ct->master && help && help->expecting == 0) {
- struct nf_conntrack_helper *helper;
- helper = __nf_ct_helper_find(newreply);
- if (helper)
- memset(&help->help, 0, sizeof(help->help));
- /* not in hash table yet, so not strictly necessary */
- rcu_assign_pointer(help->helper, helper);
+ if (ct->master || (help && help->expecting != 0))
+ goto out;
+
+ helper = __nf_ct_helper_find(newreply);
+ if (helper == NULL) {
+ if (help)
+ rcu_assign_pointer(help->helper, NULL);
+ goto out;
}
+
+ if (help == NULL) {
+ help = nf_ct_helper_ext_add(ct, GFP_ATOMIC);
+ if (help == NULL)
+ goto out;
+ } else {
+ memset(&help->help, 0, sizeof(help->help));
+ }
+
+ rcu_assign_pointer(help->helper, helper);
+out:
write_unlock_bh(&nf_conntrack_lock);
}
EXPORT_SYMBOL_GPL(nf_conntrack_alter_reply);
{
struct nf_conntrack_tuple_hash *h;
struct nf_conn *ct;
+ struct hlist_node *n;
write_lock_bh(&nf_conntrack_lock);
for (; *bucket < nf_conntrack_htable_size; (*bucket)++) {
- list_for_each_entry(h, &nf_conntrack_hash[*bucket], list) {
+ hlist_for_each_entry(h, n, &nf_conntrack_hash[*bucket], hnode) {
ct = nf_ct_tuplehash_to_ctrack(h);
if (iter(ct, data))
goto found;
}
}
- list_for_each_entry(h, &unconfirmed, list) {
+ hlist_for_each_entry(h, n, &unconfirmed, hnode) {
ct = nf_ct_tuplehash_to_ctrack(h);
if (iter(ct, data))
set_bit(IPS_DYING_BIT, &ct->status);
return 1;
}
-static void free_conntrack_hash(struct list_head *hash, int vmalloced, int size)
+void nf_ct_free_hashtable(struct hlist_head *hash, int vmalloced, int size)
{
if (vmalloced)
vfree(hash);
else
free_pages((unsigned long)hash,
- get_order(sizeof(struct list_head) * size));
+ get_order(sizeof(struct hlist_head) * size));
}
+EXPORT_SYMBOL_GPL(nf_ct_free_hashtable);
void nf_conntrack_flush(void)
{
supposed to kill the mall. */
void nf_conntrack_cleanup(void)
{
- int i;
-
rcu_assign_pointer(ip_ct_attach, NULL);
/* This makes sure all current packets have passed through
rcu_assign_pointer(nf_ct_destroy, NULL);
- for (i = 0; i < NF_CT_F_NUM; i++) {
- if (nf_ct_cache[i].use == 0)
- continue;
-
- NF_CT_ASSERT(nf_ct_cache[i].use == 1);
- nf_ct_cache[i].use = 1;
- nf_conntrack_unregister_cache(i);
- }
- kmem_cache_destroy(nf_conntrack_expect_cachep);
- free_conntrack_hash(nf_conntrack_hash, nf_conntrack_vmalloc,
- nf_conntrack_htable_size);
+ kmem_cache_destroy(nf_conntrack_cachep);
+ nf_ct_free_hashtable(nf_conntrack_hash, nf_conntrack_vmalloc,
+ nf_conntrack_htable_size);
nf_conntrack_proto_fini();
+ nf_conntrack_helper_fini();
+ nf_conntrack_expect_fini();
}
-static struct list_head *alloc_hashtable(int size, int *vmalloced)
+struct hlist_head *nf_ct_alloc_hashtable(int *sizep, int *vmalloced)
{
- struct list_head *hash;
- unsigned int i;
+ struct hlist_head *hash;
+ unsigned int size, i;
*vmalloced = 0;
+
+ size = *sizep = roundup(*sizep, PAGE_SIZE / sizeof(struct hlist_head));
hash = (void*)__get_free_pages(GFP_KERNEL,
- get_order(sizeof(struct list_head)
+ get_order(sizeof(struct hlist_head)
* size));
if (!hash) {
*vmalloced = 1;
printk(KERN_WARNING "nf_conntrack: falling back to vmalloc.\n");
- hash = vmalloc(sizeof(struct list_head) * size);
+ hash = vmalloc(sizeof(struct hlist_head) * size);
}
if (hash)
for (i = 0; i < size; i++)
- INIT_LIST_HEAD(&hash[i]);
+ INIT_HLIST_HEAD(&hash[i]);
return hash;
}
+EXPORT_SYMBOL_GPL(nf_ct_alloc_hashtable);
int set_hashsize(const char *val, struct kernel_param *kp)
{
int i, bucket, hashsize, vmalloced;
int old_vmalloced, old_size;
int rnd;
- struct list_head *hash, *old_hash;
+ struct hlist_head *hash, *old_hash;
struct nf_conntrack_tuple_hash *h;
/* On boot, we can set this without any fancy locking. */
if (!hashsize)
return -EINVAL;
- hash = alloc_hashtable(hashsize, &vmalloced);
+ hash = nf_ct_alloc_hashtable(&hashsize, &vmalloced);
if (!hash)
return -ENOMEM;
write_lock_bh(&nf_conntrack_lock);
for (i = 0; i < nf_conntrack_htable_size; i++) {
- while (!list_empty(&nf_conntrack_hash[i])) {
- h = list_entry(nf_conntrack_hash[i].next,
- struct nf_conntrack_tuple_hash, list);
- list_del(&h->list);
+ while (!hlist_empty(&nf_conntrack_hash[i])) {
+ h = hlist_entry(nf_conntrack_hash[i].first,
+ struct nf_conntrack_tuple_hash, hnode);
+ hlist_del(&h->hnode);
bucket = __hash_conntrack(&h->tuple, hashsize, rnd);
- list_add_tail(&h->list, &hash[bucket]);
+ hlist_add_head(&h->hnode, &hash[bucket]);
}
}
old_size = nf_conntrack_htable_size;
nf_conntrack_hash_rnd = rnd;
write_unlock_bh(&nf_conntrack_lock);
- free_conntrack_hash(old_hash, old_vmalloced, old_size);
+ nf_ct_free_hashtable(old_hash, old_vmalloced, old_size);
return 0;
}
int __init nf_conntrack_init(void)
{
+ int max_factor = 8;
int ret;
/* Idea from tcp.c: use 1/16384 of memory. On i386: 32MB
- * machine has 256 buckets. >= 1GB machines have 8192 buckets. */
+ * machine has 512 buckets. >= 1GB machines have 16384 buckets. */
if (!nf_conntrack_htable_size) {
nf_conntrack_htable_size
= (((num_physpages << PAGE_SHIFT) / 16384)
- / sizeof(struct list_head));
+ / sizeof(struct hlist_head));
if (num_physpages > (1024 * 1024 * 1024 / PAGE_SIZE))
- nf_conntrack_htable_size = 8192;
- if (nf_conntrack_htable_size < 16)
- nf_conntrack_htable_size = 16;
+ nf_conntrack_htable_size = 16384;
+ if (nf_conntrack_htable_size < 32)
+ nf_conntrack_htable_size = 32;
+
+ /* Use a max. factor of four by default to get the same max as
+ * with the old struct list_heads. When a table size is given
+ * we use the old value of 8 to avoid reducing the max.
+ * entries. */
+ max_factor = 4;
}
- nf_conntrack_max = 8 * nf_conntrack_htable_size;
-
- printk("nf_conntrack version %s (%u buckets, %d max)\n",
- NF_CONNTRACK_VERSION, nf_conntrack_htable_size,
- nf_conntrack_max);
-
- nf_conntrack_hash = alloc_hashtable(nf_conntrack_htable_size,
- &nf_conntrack_vmalloc);
+ nf_conntrack_hash = nf_ct_alloc_hashtable(&nf_conntrack_htable_size,
+ &nf_conntrack_vmalloc);
if (!nf_conntrack_hash) {
printk(KERN_ERR "Unable to create nf_conntrack_hash\n");
goto err_out;
}
- ret = nf_conntrack_register_cache(NF_CT_F_BASIC, "nf_conntrack:basic",
- sizeof(struct nf_conn));
- if (ret < 0) {
+ nf_conntrack_max = max_factor * nf_conntrack_htable_size;
+
+ printk("nf_conntrack version %s (%u buckets, %d max)\n",
+ NF_CONNTRACK_VERSION, nf_conntrack_htable_size,
+ nf_conntrack_max);
+
+ nf_conntrack_cachep = kmem_cache_create("nf_conntrack",
+ sizeof(struct nf_conn),
+ 0, 0, NULL, NULL);
+ if (!nf_conntrack_cachep) {
printk(KERN_ERR "Unable to create nf_conn slab cache\n");
goto err_free_hash;
}
- nf_conntrack_expect_cachep = kmem_cache_create("nf_conntrack_expect",
- sizeof(struct nf_conntrack_expect),
- 0, 0, NULL, NULL);
- if (!nf_conntrack_expect_cachep) {
- printk(KERN_ERR "Unable to create nf_expect slab cache\n");
+ ret = nf_conntrack_proto_init();
+ if (ret < 0)
goto err_free_conntrack_slab;
- }
- ret = nf_conntrack_proto_init();
+ ret = nf_conntrack_expect_init();
if (ret < 0)
- goto out_free_expect_slab;
+ goto out_fini_proto;
+
+ ret = nf_conntrack_helper_init();
+ if (ret < 0)
+ goto out_fini_expect;
/* For use by REJECT target */
rcu_assign_pointer(ip_ct_attach, __nf_conntrack_attach);
return ret;
-out_free_expect_slab:
- kmem_cache_destroy(nf_conntrack_expect_cachep);
+out_fini_expect:
+ nf_conntrack_expect_fini();
+out_fini_proto:
+ nf_conntrack_proto_fini();
err_free_conntrack_slab:
- nf_conntrack_unregister_cache(NF_CT_F_BASIC);
+ kmem_cache_destroy(nf_conntrack_cachep);
err_free_hash:
- free_conntrack_hash(nf_conntrack_hash, nf_conntrack_vmalloc,
- nf_conntrack_htable_size);
+ nf_ct_free_hashtable(nf_conntrack_hash, nf_conntrack_vmalloc,
+ nf_conntrack_htable_size);
err_out:
return -ENOMEM;
}
ATOMIC_NOTIFIER_HEAD(nf_conntrack_chain);
EXPORT_SYMBOL_GPL(nf_conntrack_chain);
-ATOMIC_NOTIFIER_HEAD(nf_conntrack_expect_chain);
-EXPORT_SYMBOL_GPL(nf_conntrack_expect_chain);
+ATOMIC_NOTIFIER_HEAD(nf_ct_expect_chain);
+EXPORT_SYMBOL_GPL(nf_ct_expect_chain);
DEFINE_PER_CPU(struct nf_conntrack_ecache, nf_conntrack_ecache);
EXPORT_PER_CPU_SYMBOL_GPL(nf_conntrack_ecache);
}
EXPORT_SYMBOL_GPL(nf_conntrack_unregister_notifier);
-int nf_conntrack_expect_register_notifier(struct notifier_block *nb)
+int nf_ct_expect_register_notifier(struct notifier_block *nb)
{
- return atomic_notifier_chain_register(&nf_conntrack_expect_chain, nb);
+ return atomic_notifier_chain_register(&nf_ct_expect_chain, nb);
}
-EXPORT_SYMBOL_GPL(nf_conntrack_expect_register_notifier);
+EXPORT_SYMBOL_GPL(nf_ct_expect_register_notifier);
-int nf_conntrack_expect_unregister_notifier(struct notifier_block *nb)
+int nf_ct_expect_unregister_notifier(struct notifier_block *nb)
{
- return atomic_notifier_chain_unregister(&nf_conntrack_expect_chain, nb);
+ return atomic_notifier_chain_unregister(&nf_ct_expect_chain, nb);
}
-EXPORT_SYMBOL_GPL(nf_conntrack_expect_unregister_notifier);
+EXPORT_SYMBOL_GPL(nf_ct_expect_unregister_notifier);
#include <linux/err.h>
#include <linux/percpu.h>
#include <linux/kernel.h>
+#include <linux/jhash.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_core.h>
#include <net/netfilter/nf_conntrack_helper.h>
#include <net/netfilter/nf_conntrack_tuple.h>
-LIST_HEAD(nf_conntrack_expect_list);
-EXPORT_SYMBOL_GPL(nf_conntrack_expect_list);
+struct hlist_head *nf_ct_expect_hash __read_mostly;
+EXPORT_SYMBOL_GPL(nf_ct_expect_hash);
-struct kmem_cache *nf_conntrack_expect_cachep __read_mostly;
-static unsigned int nf_conntrack_expect_next_id;
+unsigned int nf_ct_expect_hsize __read_mostly;
+EXPORT_SYMBOL_GPL(nf_ct_expect_hsize);
+
+static unsigned int nf_ct_expect_hash_rnd __read_mostly;
+static unsigned int nf_ct_expect_count;
+unsigned int nf_ct_expect_max __read_mostly;
+static int nf_ct_expect_hash_rnd_initted __read_mostly;
+static int nf_ct_expect_vmalloc;
+
+static struct kmem_cache *nf_ct_expect_cachep __read_mostly;
+static unsigned int nf_ct_expect_next_id;
/* nf_conntrack_expect helper functions */
void nf_ct_unlink_expect(struct nf_conntrack_expect *exp)
NF_CT_ASSERT(master_help);
NF_CT_ASSERT(!timer_pending(&exp->timeout));
- list_del(&exp->list);
- NF_CT_STAT_INC(expect_delete);
+ hlist_del(&exp->hnode);
+ nf_ct_expect_count--;
+
+ hlist_del(&exp->lnode);
master_help->expecting--;
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
+
+ NF_CT_STAT_INC(expect_delete);
}
EXPORT_SYMBOL_GPL(nf_ct_unlink_expect);
-static void expectation_timed_out(unsigned long ul_expect)
+static void nf_ct_expectation_timed_out(unsigned long ul_expect)
{
struct nf_conntrack_expect *exp = (void *)ul_expect;
write_lock_bh(&nf_conntrack_lock);
nf_ct_unlink_expect(exp);
write_unlock_bh(&nf_conntrack_lock);
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
+}
+
+static unsigned int nf_ct_expect_dst_hash(const struct nf_conntrack_tuple *tuple)
+{
+ if (unlikely(!nf_ct_expect_hash_rnd_initted)) {
+ get_random_bytes(&nf_ct_expect_hash_rnd, 4);
+ nf_ct_expect_hash_rnd_initted = 1;
+ }
+
+ return jhash2(tuple->dst.u3.all, ARRAY_SIZE(tuple->dst.u3.all),
+ (((tuple->dst.protonum ^ tuple->src.l3num) << 16) |
+ tuple->dst.u.all) ^ nf_ct_expect_hash_rnd) %
+ nf_ct_expect_hsize;
}
struct nf_conntrack_expect *
-__nf_conntrack_expect_find(const struct nf_conntrack_tuple *tuple)
+__nf_ct_expect_find(const struct nf_conntrack_tuple *tuple)
{
struct nf_conntrack_expect *i;
+ struct hlist_node *n;
+ unsigned int h;
+
+ if (!nf_ct_expect_count)
+ return NULL;
- list_for_each_entry(i, &nf_conntrack_expect_list, list) {
+ h = nf_ct_expect_dst_hash(tuple);
+ hlist_for_each_entry(i, n, &nf_ct_expect_hash[h], hnode) {
if (nf_ct_tuple_mask_cmp(tuple, &i->tuple, &i->mask))
return i;
}
return NULL;
}
-EXPORT_SYMBOL_GPL(__nf_conntrack_expect_find);
+EXPORT_SYMBOL_GPL(__nf_ct_expect_find);
/* Just find a expectation corresponding to a tuple. */
struct nf_conntrack_expect *
-nf_conntrack_expect_find_get(const struct nf_conntrack_tuple *tuple)
+nf_ct_expect_find_get(const struct nf_conntrack_tuple *tuple)
{
struct nf_conntrack_expect *i;
read_lock_bh(&nf_conntrack_lock);
- i = __nf_conntrack_expect_find(tuple);
+ i = __nf_ct_expect_find(tuple);
if (i)
atomic_inc(&i->use);
read_unlock_bh(&nf_conntrack_lock);
return i;
}
-EXPORT_SYMBOL_GPL(nf_conntrack_expect_find_get);
+EXPORT_SYMBOL_GPL(nf_ct_expect_find_get);
/* If an expectation for this connection is found, it gets delete from
* global list then returned. */
struct nf_conntrack_expect *
-find_expectation(const struct nf_conntrack_tuple *tuple)
+nf_ct_find_expectation(const struct nf_conntrack_tuple *tuple)
{
struct nf_conntrack_expect *exp;
- exp = __nf_conntrack_expect_find(tuple);
+ exp = __nf_ct_expect_find(tuple);
if (!exp)
return NULL;
/* delete all expectations for this conntrack */
void nf_ct_remove_expectations(struct nf_conn *ct)
{
- struct nf_conntrack_expect *i, *tmp;
struct nf_conn_help *help = nfct_help(ct);
+ struct nf_conntrack_expect *exp;
+ struct hlist_node *n, *next;
/* Optimization: most connection never expect any others. */
if (!help || help->expecting == 0)
return;
- list_for_each_entry_safe(i, tmp, &nf_conntrack_expect_list, list) {
- if (i->master == ct && del_timer(&i->timeout)) {
- nf_ct_unlink_expect(i);
- nf_conntrack_expect_put(i);
+ hlist_for_each_entry_safe(exp, n, next, &help->expectations, lnode) {
+ if (del_timer(&exp->timeout)) {
+ nf_ct_unlink_expect(exp);
+ nf_ct_expect_put(exp);
}
}
}
{
/* Part covered by intersection of masks must be unequal,
otherwise they clash */
- struct nf_conntrack_tuple intersect_mask;
+ struct nf_conntrack_tuple_mask intersect_mask;
int count;
- intersect_mask.src.l3num = a->mask.src.l3num & b->mask.src.l3num;
intersect_mask.src.u.all = a->mask.src.u.all & b->mask.src.u.all;
- intersect_mask.dst.u.all = a->mask.dst.u.all & b->mask.dst.u.all;
- intersect_mask.dst.protonum = a->mask.dst.protonum
- & b->mask.dst.protonum;
for (count = 0; count < NF_CT_TUPLE_L3SIZE; count++){
intersect_mask.src.u3.all[count] =
a->mask.src.u3.all[count] & b->mask.src.u3.all[count];
}
- for (count = 0; count < NF_CT_TUPLE_L3SIZE; count++){
- intersect_mask.dst.u3.all[count] =
- a->mask.dst.u3.all[count] & b->mask.dst.u3.all[count];
- }
-
return nf_ct_tuple_mask_cmp(&a->tuple, &b->tuple, &intersect_mask);
}
{
return a->master == b->master
&& nf_ct_tuple_equal(&a->tuple, &b->tuple)
- && nf_ct_tuple_equal(&a->mask, &b->mask);
+ && nf_ct_tuple_mask_equal(&a->mask, &b->mask);
}
/* Generally a bad idea to call this: could have matched already. */
-void nf_conntrack_unexpect_related(struct nf_conntrack_expect *exp)
+void nf_ct_unexpect_related(struct nf_conntrack_expect *exp)
{
- struct nf_conntrack_expect *i;
-
write_lock_bh(&nf_conntrack_lock);
- /* choose the oldest expectation to evict */
- list_for_each_entry_reverse(i, &nf_conntrack_expect_list, list) {
- if (expect_matches(i, exp) && del_timer(&i->timeout)) {
- nf_ct_unlink_expect(i);
- write_unlock_bh(&nf_conntrack_lock);
- nf_conntrack_expect_put(i);
- return;
- }
+ if (del_timer(&exp->timeout)) {
+ nf_ct_unlink_expect(exp);
+ nf_ct_expect_put(exp);
}
write_unlock_bh(&nf_conntrack_lock);
}
-EXPORT_SYMBOL_GPL(nf_conntrack_unexpect_related);
+EXPORT_SYMBOL_GPL(nf_ct_unexpect_related);
/* We don't increase the master conntrack refcount for non-fulfilled
* conntracks. During the conntrack destruction, the expectations are
* always killed before the conntrack itself */
-struct nf_conntrack_expect *nf_conntrack_expect_alloc(struct nf_conn *me)
+struct nf_conntrack_expect *nf_ct_expect_alloc(struct nf_conn *me)
{
struct nf_conntrack_expect *new;
- new = kmem_cache_alloc(nf_conntrack_expect_cachep, GFP_ATOMIC);
+ new = kmem_cache_alloc(nf_ct_expect_cachep, GFP_ATOMIC);
if (!new)
return NULL;
atomic_set(&new->use, 1);
return new;
}
-EXPORT_SYMBOL_GPL(nf_conntrack_expect_alloc);
+EXPORT_SYMBOL_GPL(nf_ct_expect_alloc);
-void nf_conntrack_expect_init(struct nf_conntrack_expect *exp, int family,
- union nf_conntrack_address *saddr,
- union nf_conntrack_address *daddr,
- u_int8_t proto, __be16 *src, __be16 *dst)
+void nf_ct_expect_init(struct nf_conntrack_expect *exp, int family,
+ union nf_conntrack_address *saddr,
+ union nf_conntrack_address *daddr,
+ u_int8_t proto, __be16 *src, __be16 *dst)
{
int len;
exp->helper = NULL;
exp->tuple.src.l3num = family;
exp->tuple.dst.protonum = proto;
- exp->mask.src.l3num = 0xFFFF;
- exp->mask.dst.protonum = 0xFF;
if (saddr) {
memcpy(&exp->tuple.src.u3, saddr, len);
memset(&exp->mask.src.u3, 0x00, sizeof(exp->mask.src.u3));
}
- if (daddr) {
- memcpy(&exp->tuple.dst.u3, daddr, len);
- if (sizeof(exp->tuple.dst.u3) > len)
- /* address needs to be cleared for nf_ct_tuple_equal */
- memset((void *)&exp->tuple.dst.u3 + len, 0x00,
- sizeof(exp->tuple.dst.u3) - len);
- memset(&exp->mask.dst.u3, 0xFF, len);
- if (sizeof(exp->mask.dst.u3) > len)
- memset((void *)&exp->mask.dst.u3 + len, 0x00,
- sizeof(exp->mask.dst.u3) - len);
- } else {
- memset(&exp->tuple.dst.u3, 0x00, sizeof(exp->tuple.dst.u3));
- memset(&exp->mask.dst.u3, 0x00, sizeof(exp->mask.dst.u3));
- }
-
if (src) {
exp->tuple.src.u.all = (__force u16)*src;
exp->mask.src.u.all = 0xFFFF;
exp->mask.src.u.all = 0;
}
- if (dst) {
- exp->tuple.dst.u.all = (__force u16)*dst;
- exp->mask.dst.u.all = 0xFFFF;
- } else {
- exp->tuple.dst.u.all = 0;
- exp->mask.dst.u.all = 0;
- }
+ memcpy(&exp->tuple.dst.u3, daddr, len);
+ if (sizeof(exp->tuple.dst.u3) > len)
+ /* address needs to be cleared for nf_ct_tuple_equal */
+ memset((void *)&exp->tuple.dst.u3 + len, 0x00,
+ sizeof(exp->tuple.dst.u3) - len);
+
+ exp->tuple.dst.u.all = (__force u16)*dst;
}
-EXPORT_SYMBOL_GPL(nf_conntrack_expect_init);
+EXPORT_SYMBOL_GPL(nf_ct_expect_init);
-void nf_conntrack_expect_put(struct nf_conntrack_expect *exp)
+void nf_ct_expect_put(struct nf_conntrack_expect *exp)
{
if (atomic_dec_and_test(&exp->use))
- kmem_cache_free(nf_conntrack_expect_cachep, exp);
+ kmem_cache_free(nf_ct_expect_cachep, exp);
}
-EXPORT_SYMBOL_GPL(nf_conntrack_expect_put);
+EXPORT_SYMBOL_GPL(nf_ct_expect_put);
-static void nf_conntrack_expect_insert(struct nf_conntrack_expect *exp)
+static void nf_ct_expect_insert(struct nf_conntrack_expect *exp)
{
struct nf_conn_help *master_help = nfct_help(exp->master);
+ unsigned int h = nf_ct_expect_dst_hash(&exp->tuple);
atomic_inc(&exp->use);
+
+ hlist_add_head(&exp->lnode, &master_help->expectations);
master_help->expecting++;
- list_add(&exp->list, &nf_conntrack_expect_list);
- setup_timer(&exp->timeout, expectation_timed_out, (unsigned long)exp);
+ hlist_add_head(&exp->hnode, &nf_ct_expect_hash[h]);
+ nf_ct_expect_count++;
+
+ setup_timer(&exp->timeout, nf_ct_expectation_timed_out,
+ (unsigned long)exp);
exp->timeout.expires = jiffies + master_help->helper->timeout * HZ;
add_timer(&exp->timeout);
- exp->id = ++nf_conntrack_expect_next_id;
+ exp->id = ++nf_ct_expect_next_id;
atomic_inc(&exp->use);
NF_CT_STAT_INC(expect_create);
}
/* Race with expectations being used means we could have none to find; OK. */
static void evict_oldest_expect(struct nf_conn *master)
{
- struct nf_conntrack_expect *i;
+ struct nf_conn_help *master_help = nfct_help(master);
+ struct nf_conntrack_expect *exp = NULL;
+ struct hlist_node *n;
- list_for_each_entry_reverse(i, &nf_conntrack_expect_list, list) {
- if (i->master == master) {
- if (del_timer(&i->timeout)) {
- nf_ct_unlink_expect(i);
- nf_conntrack_expect_put(i);
- }
- break;
- }
+ hlist_for_each_entry(exp, n, &master_help->expectations, lnode)
+ ; /* nothing */
+
+ if (exp && del_timer(&exp->timeout)) {
+ nf_ct_unlink_expect(exp);
+ nf_ct_expect_put(exp);
}
}
return 1;
}
-int nf_conntrack_expect_related(struct nf_conntrack_expect *expect)
+int nf_ct_expect_related(struct nf_conntrack_expect *expect)
{
struct nf_conntrack_expect *i;
struct nf_conn *master = expect->master;
struct nf_conn_help *master_help = nfct_help(master);
+ struct hlist_node *n;
+ unsigned int h;
int ret;
NF_CT_ASSERT(master_help);
ret = -ESHUTDOWN;
goto out;
}
- list_for_each_entry(i, &nf_conntrack_expect_list, list) {
+ h = nf_ct_expect_dst_hash(&expect->tuple);
+ hlist_for_each_entry(i, n, &nf_ct_expect_hash[h], hnode) {
if (expect_matches(i, expect)) {
/* Refresh timer: if it's dying, ignore.. */
if (refresh_timer(i)) {
master_help->expecting >= master_help->helper->max_expected)
evict_oldest_expect(master);
- nf_conntrack_expect_insert(expect);
- nf_conntrack_expect_event(IPEXP_NEW, expect);
+ if (nf_ct_expect_count >= nf_ct_expect_max) {
+ if (net_ratelimit())
+ printk(KERN_WARNING
+ "nf_conntrack: expectation table full");
+ ret = -EMFILE;
+ goto out;
+ }
+
+ nf_ct_expect_insert(expect);
+ nf_ct_expect_event(IPEXP_NEW, expect);
ret = 0;
out:
write_unlock_bh(&nf_conntrack_lock);
return ret;
}
-EXPORT_SYMBOL_GPL(nf_conntrack_expect_related);
+EXPORT_SYMBOL_GPL(nf_ct_expect_related);
#ifdef CONFIG_PROC_FS
-static void *exp_seq_start(struct seq_file *s, loff_t *pos)
+struct ct_expect_iter_state {
+ unsigned int bucket;
+};
+
+static struct hlist_node *ct_expect_get_first(struct seq_file *seq)
{
- struct list_head *e = &nf_conntrack_expect_list;
- loff_t i;
+ struct ct_expect_iter_state *st = seq->private;
- /* strange seq_file api calls stop even if we fail,
- * thus we need to grab lock since stop unlocks */
- read_lock_bh(&nf_conntrack_lock);
+ for (st->bucket = 0; st->bucket < nf_ct_expect_hsize; st->bucket++) {
+ if (!hlist_empty(&nf_ct_expect_hash[st->bucket]))
+ return nf_ct_expect_hash[st->bucket].first;
+ }
+ return NULL;
+}
- if (list_empty(e))
- return NULL;
+static struct hlist_node *ct_expect_get_next(struct seq_file *seq,
+ struct hlist_node *head)
+{
+ struct ct_expect_iter_state *st = seq->private;
- for (i = 0; i <= *pos; i++) {
- e = e->next;
- if (e == &nf_conntrack_expect_list)
+ head = head->next;
+ while (head == NULL) {
+ if (++st->bucket >= nf_ct_expect_hsize)
return NULL;
+ head = nf_ct_expect_hash[st->bucket].first;
}
- return e;
+ return head;
}
-static void *exp_seq_next(struct seq_file *s, void *v, loff_t *pos)
+static struct hlist_node *ct_expect_get_idx(struct seq_file *seq, loff_t pos)
{
- struct list_head *e = v;
+ struct hlist_node *head = ct_expect_get_first(seq);
- ++*pos;
- e = e->next;
+ if (head)
+ while (pos && (head = ct_expect_get_next(seq, head)))
+ pos--;
+ return pos ? NULL : head;
+}
- if (e == &nf_conntrack_expect_list)
- return NULL;
+static void *exp_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ read_lock_bh(&nf_conntrack_lock);
+ return ct_expect_get_idx(seq, *pos);
+}
- return e;
+static void *exp_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ (*pos)++;
+ return ct_expect_get_next(seq, v);
}
-static void exp_seq_stop(struct seq_file *s, void *v)
+static void exp_seq_stop(struct seq_file *seq, void *v)
{
read_unlock_bh(&nf_conntrack_lock);
}
static int exp_seq_show(struct seq_file *s, void *v)
{
- struct nf_conntrack_expect *expect = v;
+ struct nf_conntrack_expect *expect;
+ struct hlist_node *n = v;
+
+ expect = hlist_entry(n, struct nf_conntrack_expect, hnode);
if (expect->timeout.function)
seq_printf(s, "%ld ", timer_pending(&expect->timeout)
return seq_putc(s, '\n');
}
-static struct seq_operations exp_seq_ops = {
+static const struct seq_operations exp_seq_ops = {
.start = exp_seq_start,
.next = exp_seq_next,
.stop = exp_seq_stop,
static int exp_open(struct inode *inode, struct file *file)
{
- return seq_open(file, &exp_seq_ops);
+ struct seq_file *seq;
+ struct ct_expect_iter_state *st;
+ int ret;
+
+ st = kmalloc(sizeof(struct ct_expect_iter_state), GFP_KERNEL);
+ if (st == NULL)
+ return -ENOMEM;
+ ret = seq_open(file, &exp_seq_ops);
+ if (ret)
+ goto out_free;
+ seq = file->private_data;
+ seq->private = st;
+ memset(st, 0, sizeof(struct ct_expect_iter_state));
+ return ret;
+out_free:
+ kfree(st);
+ return ret;
}
-const struct file_operations exp_file_ops = {
+static const struct file_operations exp_file_ops = {
.owner = THIS_MODULE,
.open = exp_open,
.read = seq_read,
.llseek = seq_lseek,
- .release = seq_release
+ .release = seq_release_private,
};
#endif /* CONFIG_PROC_FS */
+
+static int __init exp_proc_init(void)
+{
+#ifdef CONFIG_PROC_FS
+ struct proc_dir_entry *proc;
+
+ proc = proc_net_fops_create("nf_conntrack_expect", 0440, &exp_file_ops);
+ if (!proc)
+ return -ENOMEM;
+#endif /* CONFIG_PROC_FS */
+ return 0;
+}
+
+static void exp_proc_remove(void)
+{
+#ifdef CONFIG_PROC_FS
+ proc_net_remove("nf_conntrack_expect");
+#endif /* CONFIG_PROC_FS */
+}
+
+module_param_named(expect_hashsize, nf_ct_expect_hsize, uint, 0600);
+
+int __init nf_conntrack_expect_init(void)
+{
+ int err = -ENOMEM;
+
+ if (!nf_ct_expect_hsize) {
+ nf_ct_expect_hsize = nf_conntrack_htable_size / 256;
+ if (!nf_ct_expect_hsize)
+ nf_ct_expect_hsize = 1;
+ }
+ nf_ct_expect_max = nf_ct_expect_hsize * 4;
+
+ nf_ct_expect_hash = nf_ct_alloc_hashtable(&nf_ct_expect_hsize,
+ &nf_ct_expect_vmalloc);
+ if (nf_ct_expect_hash == NULL)
+ goto err1;
+
+ nf_ct_expect_cachep = kmem_cache_create("nf_conntrack_expect",
+ sizeof(struct nf_conntrack_expect),
+ 0, 0, NULL, NULL);
+ if (!nf_ct_expect_cachep)
+ goto err2;
+
+ err = exp_proc_init();
+ if (err < 0)
+ goto err3;
+
+ return 0;
+
+err3:
+ nf_ct_free_hashtable(nf_ct_expect_hash, nf_ct_expect_vmalloc,
+ nf_ct_expect_hsize);
+err2:
+ kmem_cache_destroy(nf_ct_expect_cachep);
+err1:
+ return err;
+}
+
+void nf_conntrack_expect_fini(void)
+{
+ exp_proc_remove();
+ kmem_cache_destroy(nf_ct_expect_cachep);
+ nf_ct_free_hashtable(nf_ct_expect_hash, nf_ct_expect_vmalloc,
+ nf_ct_expect_hsize);
+}
--- /dev/null
+/* Structure dynamic extension infrastructure
+ * Copyright (C) 2004 Rusty Russell IBM Corporation
+ * Copyright (C) 2007 Netfilter Core Team <coreteam@netfilter.org>
+ * Copyright (C) 2007 USAGI/WIDE Project <http://www.linux-ipv6.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/rcupdate.h>
+#include <linux/slab.h>
+#include <linux/skbuff.h>
+#include <net/netfilter/nf_conntrack_extend.h>
+
+static struct nf_ct_ext_type *nf_ct_ext_types[NF_CT_EXT_NUM];
+static DEFINE_MUTEX(nf_ct_ext_type_mutex);
+
+/* Horrible trick to figure out smallest amount worth kmallocing. */
+#define CACHE(x) (x) + 0 *
+enum {
+ NF_CT_EXT_MIN_SIZE =
+#include <linux/kmalloc_sizes.h>
+ 1 };
+#undef CACHE
+
+void __nf_ct_ext_destroy(struct nf_conn *ct)
+{
+ unsigned int i;
+ struct nf_ct_ext_type *t;
+
+ for (i = 0; i < NF_CT_EXT_NUM; i++) {
+ if (!nf_ct_ext_exist(ct, i))
+ continue;
+
+ rcu_read_lock();
+ t = rcu_dereference(nf_ct_ext_types[i]);
+
+ /* Here the nf_ct_ext_type might have been unregisterd.
+ * I.e., it has responsible to cleanup private
+ * area in all conntracks when it is unregisterd.
+ */
+ if (t && t->destroy)
+ t->destroy(ct);
+ rcu_read_unlock();
+ }
+}
+EXPORT_SYMBOL(__nf_ct_ext_destroy);
+
+static void *
+nf_ct_ext_create(struct nf_ct_ext **ext, enum nf_ct_ext_id id, gfp_t gfp)
+{
+ unsigned int off, len, real_len;
+ struct nf_ct_ext_type *t;
+
+ rcu_read_lock();
+ t = rcu_dereference(nf_ct_ext_types[id]);
+ BUG_ON(t == NULL);
+ off = ALIGN(sizeof(struct nf_ct_ext), t->align);
+ len = off + t->len;
+ real_len = t->alloc_size;
+ rcu_read_unlock();
+
+ *ext = kzalloc(real_len, gfp);
+ if (!*ext)
+ return NULL;
+
+ (*ext)->offset[id] = off;
+ (*ext)->len = len;
+ (*ext)->real_len = real_len;
+
+ return (void *)(*ext) + off;
+}
+
+void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp)
+{
+ struct nf_ct_ext *new;
+ int i, newlen, newoff;
+ struct nf_ct_ext_type *t;
+
+ if (!ct->ext)
+ return nf_ct_ext_create(&ct->ext, id, gfp);
+
+ if (nf_ct_ext_exist(ct, id))
+ return NULL;
+
+ rcu_read_lock();
+ t = rcu_dereference(nf_ct_ext_types[id]);
+ BUG_ON(t == NULL);
+
+ newoff = ALIGN(ct->ext->len, t->align);
+ newlen = newoff + t->len;
+ rcu_read_unlock();
+
+ if (newlen >= ct->ext->real_len) {
+ new = kmalloc(newlen, gfp);
+ if (!new)
+ return NULL;
+
+ memcpy(new, ct->ext, ct->ext->len);
+
+ for (i = 0; i < NF_CT_EXT_NUM; i++) {
+ if (!nf_ct_ext_exist(ct, i))
+ continue;
+
+ rcu_read_lock();
+ t = rcu_dereference(nf_ct_ext_types[i]);
+ if (t && t->move)
+ t->move(ct, ct->ext + ct->ext->offset[id]);
+ rcu_read_unlock();
+ }
+ kfree(ct->ext);
+ new->real_len = newlen;
+ ct->ext = new;
+ }
+
+ ct->ext->offset[id] = newoff;
+ ct->ext->len = newlen;
+ memset((void *)ct->ext + newoff, 0, newlen - newoff);
+ return (void *)ct->ext + newoff;
+}
+EXPORT_SYMBOL(__nf_ct_ext_add);
+
+static void update_alloc_size(struct nf_ct_ext_type *type)
+{
+ int i, j;
+ struct nf_ct_ext_type *t1, *t2;
+ enum nf_ct_ext_id min = 0, max = NF_CT_EXT_NUM - 1;
+
+ /* unnecessary to update all types */
+ if ((type->flags & NF_CT_EXT_F_PREALLOC) == 0) {
+ min = type->id;
+ max = type->id;
+ }
+
+ /* This assumes that extended areas in conntrack for the types
+ whose NF_CT_EXT_F_PREALLOC bit set are allocated in order */
+ for (i = min; i <= max; i++) {
+ t1 = nf_ct_ext_types[i];
+ if (!t1)
+ continue;
+
+ t1->alloc_size = sizeof(struct nf_ct_ext)
+ + ALIGN(sizeof(struct nf_ct_ext), t1->align)
+ + t1->len;
+ for (j = 0; j < NF_CT_EXT_NUM; j++) {
+ t2 = nf_ct_ext_types[j];
+ if (t2 == NULL || t2 == t1 ||
+ (t2->flags & NF_CT_EXT_F_PREALLOC) == 0)
+ continue;
+
+ t1->alloc_size = ALIGN(t1->alloc_size, t2->align)
+ + t2->len;
+ }
+ if (t1->alloc_size < NF_CT_EXT_MIN_SIZE)
+ t1->alloc_size = NF_CT_EXT_MIN_SIZE;
+ }
+}
+
+/* This MUST be called in process context. */
+int nf_ct_extend_register(struct nf_ct_ext_type *type)
+{
+ int ret = 0;
+
+ mutex_lock(&nf_ct_ext_type_mutex);
+ if (nf_ct_ext_types[type->id]) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ /* This ensures that nf_ct_ext_create() can allocate enough area
+ before updating alloc_size */
+ type->alloc_size = ALIGN(sizeof(struct nf_ct_ext), type->align)
+ + type->len;
+ rcu_assign_pointer(nf_ct_ext_types[type->id], type);
+ update_alloc_size(type);
+out:
+ mutex_unlock(&nf_ct_ext_type_mutex);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(nf_ct_extend_register);
+
+/* This MUST be called in process context. */
+void nf_ct_extend_unregister(struct nf_ct_ext_type *type)
+{
+ mutex_lock(&nf_ct_ext_type_mutex);
+ rcu_assign_pointer(nf_ct_ext_types[type->id], NULL);
+ update_alloc_size(type);
+ mutex_unlock(&nf_ct_ext_type_mutex);
+ synchronize_rcu();
+}
+EXPORT_SYMBOL_GPL(nf_ct_extend_unregister);
struct nf_conntrack_expect *exp);
EXPORT_SYMBOL_GPL(nf_nat_ftp_hook);
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
static int try_rfc959(const char *, size_t, struct nf_conntrack_man *, char);
static int try_eprt(const char *, size_t, struct nf_conntrack_man *, char);
static int try_epsv_response(const char *, size_t, struct nf_conntrack_man *,
if (*data == term && i == array_size - 1)
return len;
- DEBUGP("Char %u (got %u nums) `%u' unexpected\n",
- len, i, *data);
+ pr_debug("Char %u (got %u nums) `%u' unexpected\n",
+ len, i, *data);
return 0;
}
}
- DEBUGP("Failed to fill %u numbers separated by %c\n", array_size, sep);
-
+ pr_debug("Failed to fill %u numbers separated by %c\n",
+ array_size, sep);
return 0;
}
if (tmp_port == 0)
break;
*port = htons(tmp_port);
- DEBUGP("get_port: return %d\n", tmp_port);
+ pr_debug("get_port: return %d\n", tmp_port);
return i + 1;
}
else if (data[i] >= '0' && data[i] <= '9')
tmp_port = tmp_port*10 + data[i] - '0';
else { /* Some other crap */
- DEBUGP("get_port: invalid char.\n");
+ pr_debug("get_port: invalid char.\n");
break;
}
}
/* First character is delimiter, then "1" for IPv4 or "2" for IPv6,
then delimiter again. */
if (dlen <= 3) {
- DEBUGP("EPRT: too short\n");
+ pr_debug("EPRT: too short\n");
return 0;
}
delim = data[0];
if (isdigit(delim) || delim < 33 || delim > 126 || data[2] != delim) {
- DEBUGP("try_eprt: invalid delimitter.\n");
+ pr_debug("try_eprt: invalid delimitter.\n");
return 0;
}
if ((cmd->l3num == PF_INET && data[1] != '1') ||
(cmd->l3num == PF_INET6 && data[1] != '2')) {
- DEBUGP("EPRT: invalid protocol number.\n");
+ pr_debug("EPRT: invalid protocol number.\n");
return 0;
}
- DEBUGP("EPRT: Got %c%c%c\n", delim, data[1], delim);
+ pr_debug("EPRT: Got %c%c%c\n", delim, data[1], delim);
if (data[1] == '1') {
u_int32_t array[4];
if (length == 0)
return 0;
- DEBUGP("EPRT: Got IP address!\n");
+ pr_debug("EPRT: Got IP address!\n");
/* Start offset includes initial "|1|", and trailing delimiter */
return get_port(data, 3 + length + 1, dlen, delim, &cmd->u.tcp.port);
}
{
size_t i;
- DEBUGP("find_pattern `%s': dlen = %u\n", pattern, dlen);
+ pr_debug("find_pattern `%s': dlen = %Zu\n", pattern, dlen);
if (dlen == 0)
return 0;
#if 0
size_t i;
- DEBUGP("ftp: string mismatch\n");
+ pr_debug("ftp: string mismatch\n");
for (i = 0; i < plen; i++) {
- DEBUGP("ftp:char %u `%c'(%u) vs `%c'(%u)\n",
- i, data[i], data[i],
- pattern[i], pattern[i]);
+ pr_debug("ftp:char %u `%c'(%u) vs `%c'(%u)\n",
+ i, data[i], data[i],
+ pattern[i], pattern[i]);
}
#endif
return 0;
}
- DEBUGP("Pattern matches!\n");
+ pr_debug("Pattern matches!\n");
/* Now we've found the constant string, try to skip
to the 'skip' character */
for (i = plen; data[i] != skip; i++)
/* Skip over the last character */
i++;
- DEBUGP("Skipped up to `%c'!\n", skip);
+ pr_debug("Skipped up to `%c'!\n", skip);
*numoff = i;
*numlen = getnum(data + i, dlen - i, cmd, term);
if (!*numlen)
return -1;
- DEBUGP("Match succeeded!\n");
+ pr_debug("Match succeeded!\n");
return 1;
}
unsigned int matchlen, matchoff;
struct nf_ct_ftp_master *ct_ftp_info = &nfct_help(ct)->help.ct_ftp_info;
struct nf_conntrack_expect *exp;
+ union nf_conntrack_address *daddr;
struct nf_conntrack_man cmd = {};
unsigned int i;
int found = 0, ends_in_nl;
/* Until there's been traffic both ways, don't look in packets. */
if (ctinfo != IP_CT_ESTABLISHED
&& ctinfo != IP_CT_ESTABLISHED+IP_CT_IS_REPLY) {
- DEBUGP("ftp: Conntrackinfo = %u\n", ctinfo);
+ pr_debug("ftp: Conntrackinfo = %u\n", ctinfo);
return NF_ACCEPT;
}
dataoff = protoff + th->doff * 4;
/* No data? */
if (dataoff >= (*pskb)->len) {
- DEBUGP("ftp: dataoff(%u) >= skblen(%u)\n", dataoff,
- (*pskb)->len);
+ pr_debug("ftp: dataoff(%u) >= skblen(%u)\n", dataoff,
+ (*pskb)->len);
return NF_ACCEPT;
}
datalen = (*pskb)->len - dataoff;
/* Look up to see if we're just after a \n. */
if (!find_nl_seq(ntohl(th->seq), ct_ftp_info, dir)) {
/* Now if this ends in \n, update ftp info. */
- DEBUGP("nf_conntrack_ftp_help: wrong seq pos %s(%u) or %s(%u)\n",
- ct_ftp_info->seq_aft_nl_num[dir] > 0 ? "" : "(UNSET)",
- ct_ftp_info->seq_aft_nl[dir][0],
- ct_ftp_info->seq_aft_nl_num[dir] > 1 ? "" : "(UNSET)",
- ct_ftp_info->seq_aft_nl[dir][1]);
+ pr_debug("nf_conntrack_ftp: wrong seq pos %s(%u) or %s(%u)\n",
+ ct_ftp_info->seq_aft_nl_num[dir] > 0 ? "" : "(UNSET)",
+ ct_ftp_info->seq_aft_nl[dir][0],
+ ct_ftp_info->seq_aft_nl_num[dir] > 1 ? "" : "(UNSET)",
+ ct_ftp_info->seq_aft_nl[dir][1]);
ret = NF_ACCEPT;
goto out_update_nl;
}
goto out_update_nl;
}
- DEBUGP("conntrack_ftp: match `%.*s' (%u bytes at %u)\n",
- (int)matchlen, fb_ptr + matchoff,
- matchlen, ntohl(th->seq) + matchoff);
+ pr_debug("conntrack_ftp: match `%.*s' (%u bytes at %u)\n",
+ matchlen, fb_ptr + matchoff,
+ matchlen, ntohl(th->seq) + matchoff);
- exp = nf_conntrack_expect_alloc(ct);
+ exp = nf_ct_expect_alloc(ct);
if (exp == NULL) {
ret = NF_DROP;
goto out;
/* We refer to the reverse direction ("!dir") tuples here,
* because we're expecting something in the other direction.
* Doesn't matter unless NAT is happening. */
- exp->tuple.dst.u3 = ct->tuplehash[!dir].tuple.dst.u3;
+ daddr = &ct->tuplehash[!dir].tuple.dst.u3;
/* Update the ftp info */
if ((cmd.l3num == ct->tuplehash[dir].tuple.src.l3num) &&
different IP address. Simply don't record it for
NAT. */
if (cmd.l3num == PF_INET) {
- DEBUGP("conntrack_ftp: NOT RECORDING: " NIPQUAD_FMT " != " NIPQUAD_FMT "\n",
- NIPQUAD(cmd.u3.ip),
- NIPQUAD(ct->tuplehash[dir].tuple.src.u3.ip));
+ pr_debug("conntrack_ftp: NOT RECORDING: " NIPQUAD_FMT
+ " != " NIPQUAD_FMT "\n",
+ NIPQUAD(cmd.u3.ip),
+ NIPQUAD(ct->tuplehash[dir].tuple.src.u3.ip));
} else {
- DEBUGP("conntrack_ftp: NOT RECORDING: " NIP6_FMT " != " NIP6_FMT "\n",
- NIP6(*((struct in6_addr *)cmd.u3.ip6)),
- NIP6(*((struct in6_addr *)ct->tuplehash[dir]
- .tuple.src.u3.ip6)));
+ pr_debug("conntrack_ftp: NOT RECORDING: " NIP6_FMT
+ " != " NIP6_FMT "\n",
+ NIP6(*((struct in6_addr *)cmd.u3.ip6)),
+ NIP6(*((struct in6_addr *)
+ ct->tuplehash[dir].tuple.src.u3.ip6)));
}
/* Thanks to Cristiano Lincoln Mattos
ret = NF_ACCEPT;
goto out_put_expect;
}
- memcpy(&exp->tuple.dst.u3, &cmd.u3.all,
- sizeof(exp->tuple.dst.u3));
- }
-
- exp->tuple.src.u3 = ct->tuplehash[!dir].tuple.src.u3;
- exp->tuple.src.l3num = cmd.l3num;
- exp->tuple.src.u.tcp.port = 0;
- exp->tuple.dst.u.tcp.port = cmd.u.tcp.port;
- exp->tuple.dst.protonum = IPPROTO_TCP;
-
- exp->mask = (struct nf_conntrack_tuple)
- { .src = { .l3num = 0xFFFF,
- .u = { .tcp = { 0 }},
- },
- .dst = { .protonum = 0xFF,
- .u = { .tcp = { __constant_htons(0xFFFF) }},
- },
- };
- if (cmd.l3num == PF_INET) {
- exp->mask.src.u3.ip = htonl(0xFFFFFFFF);
- exp->mask.dst.u3.ip = htonl(0xFFFFFFFF);
- } else {
- memset(exp->mask.src.u3.ip6, 0xFF,
- sizeof(exp->mask.src.u3.ip6));
- memset(exp->mask.dst.u3.ip6, 0xFF,
- sizeof(exp->mask.src.u3.ip6));
+ daddr = &cmd.u3;
}
- exp->expectfn = NULL;
- exp->helper = NULL;
- exp->flags = 0;
+ nf_ct_expect_init(exp, cmd.l3num,
+ &ct->tuplehash[!dir].tuple.src.u3, daddr,
+ IPPROTO_TCP, NULL, &cmd.u.tcp.port);
/* Now, NAT might want to mangle the packet, and register the
* (possibly changed) expectation itself. */
matchoff, matchlen, exp);
else {
/* Can't expect this? Best to drop packet now. */
- if (nf_conntrack_expect_related(exp) != 0)
+ if (nf_ct_expect_related(exp) != 0)
ret = NF_DROP;
else
ret = NF_ACCEPT;
}
out_put_expect:
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
out_update_nl:
/* Now if this ends in \n, update ftp info. Seq may have been
return ret;
}
-static struct nf_conntrack_helper ftp[MAX_PORTS][2];
-static char ftp_names[MAX_PORTS][2][sizeof("ftp-65535")];
+static struct nf_conntrack_helper ftp[MAX_PORTS][2] __read_mostly;
+static char ftp_names[MAX_PORTS][2][sizeof("ftp-65535")] __read_mostly;
/* don't make this __exit, since it's called from __init ! */
static void nf_conntrack_ftp_fini(void)
if (ftp[i][j].me == NULL)
continue;
- DEBUGP("nf_ct_ftp: unregistering helper for pf: %d "
- "port: %d\n",
- ftp[i][j].tuple.src.l3num, ports[i]);
+ pr_debug("nf_ct_ftp: unregistering helper for pf: %d "
+ "port: %d\n",
+ ftp[i][j].tuple.src.l3num, ports[i]);
nf_conntrack_helper_unregister(&ftp[i][j]);
}
}
for (j = 0; j < 2; j++) {
ftp[i][j].tuple.src.u.tcp.port = htons(ports[i]);
ftp[i][j].tuple.dst.protonum = IPPROTO_TCP;
- ftp[i][j].mask.src.l3num = 0xFFFF;
- ftp[i][j].mask.src.u.tcp.port = htons(0xFFFF);
- ftp[i][j].mask.dst.protonum = 0xFF;
ftp[i][j].max_expected = 1;
ftp[i][j].timeout = 5 * 60; /* 5 Minutes */
ftp[i][j].me = THIS_MODULE;
sprintf(tmpname, "ftp-%d", ports[i]);
ftp[i][j].name = tmpname;
- DEBUGP("nf_ct_ftp: registering helper for pf: %d "
- "port: %d\n",
- ftp[i][j].tuple.src.l3num, ports[i]);
+ pr_debug("nf_ct_ftp: registering helper for pf: %d "
+ "port: %d\n",
+ ftp[i][j].tuple.src.l3num, ports[i]);
ret = nf_conntrack_helper_register(&ftp[i][j]);
if (ret) {
printk("nf_ct_ftp: failed to register helper "
/* Decode the extension components */
for (opt = 0; opt < bmp2_len; opt++, i++, son++) {
- if (i < f->ub && son->attr & STOP) {
- PRINT("%*.s%s\n", (level + 1) * TAB_SIZE, " ",
- son->name);
- return H323_ERROR_STOP;
- }
-
- if (!((0x80000000 >> opt) & bmp2)) /* Not present */
- continue;
-
/* Check Range */
if (i >= f->ub) { /* Newer Version? */
CHECK_BOUND(bs, 2);
continue;
}
+ if (son->attr & STOP) {
+ PRINT("%*.s%s\n", (level + 1) * TAB_SIZE, " ",
+ son->name);
+ return H323_ERROR_STOP;
+ }
+
+ if (!((0x80000000 >> opt) & bmp2)) /* Not present */
+ continue;
+
CHECK_BOUND(bs, 2);
len = get_len(bs);
CHECK_BOUND(bs, len);
#include <net/netfilter/nf_conntrack_helper.h>
#include <linux/netfilter/nf_conntrack_h323.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Parameters */
static unsigned int default_rrq_ttl __read_mostly = 300;
module_param(default_rrq_ttl, uint, 0600);
if (tcpdatalen < 4 || tpkt[0] != 0x03 || tpkt[1] != 0) {
/* Netmeeting sends TPKT header and data separately */
if (info->tpkt_len[dir] > 0) {
- DEBUGP("nf_ct_h323: previous packet "
- "indicated separate TPKT data of %hu "
- "bytes\n", info->tpkt_len[dir]);
+ pr_debug("nf_ct_h323: previous packet "
+ "indicated separate TPKT data of %hu "
+ "bytes\n", info->tpkt_len[dir]);
if (info->tpkt_len[dir] <= tcpdatalen) {
/* Yes, there was a TPKT header
* received */
}
/* Fragmented TPKT */
- if (net_ratelimit())
- printk("nf_ct_h323: "
- "fragmented TPKT\n");
+ pr_debug("nf_ct_h323: fragmented TPKT\n");
goto clear_out;
}
if (tpktlen > tcpdatalen) {
if (tcpdatalen == 4) { /* Separate TPKT header */
/* Netmeeting sends TPKT header and data separately */
- DEBUGP("nf_ct_h323: separate TPKT header indicates "
- "there will be TPKT data of %hu bytes\n",
- tpktlen - 4);
+ pr_debug("nf_ct_h323: separate TPKT header indicates "
+ "there will be TPKT data of %hu bytes\n",
+ tpktlen - 4);
info->tpkt_len[dir] = tpktlen - 4;
return 0;
}
rtcp_port = htons(ntohs(port) + 1);
/* Create expect for RTP */
- if ((rtp_exp = nf_conntrack_expect_alloc(ct)) == NULL)
+ if ((rtp_exp = nf_ct_expect_alloc(ct)) == NULL)
return -1;
- nf_conntrack_expect_init(rtp_exp, ct->tuplehash[!dir].tuple.src.l3num,
- &ct->tuplehash[!dir].tuple.src.u3,
- &ct->tuplehash[!dir].tuple.dst.u3,
- IPPROTO_UDP, NULL, &rtp_port);
+ nf_ct_expect_init(rtp_exp, ct->tuplehash[!dir].tuple.src.l3num,
+ &ct->tuplehash[!dir].tuple.src.u3,
+ &ct->tuplehash[!dir].tuple.dst.u3,
+ IPPROTO_UDP, NULL, &rtp_port);
/* Create expect for RTCP */
- if ((rtcp_exp = nf_conntrack_expect_alloc(ct)) == NULL) {
- nf_conntrack_expect_put(rtp_exp);
+ if ((rtcp_exp = nf_ct_expect_alloc(ct)) == NULL) {
+ nf_ct_expect_put(rtp_exp);
return -1;
}
- nf_conntrack_expect_init(rtcp_exp, ct->tuplehash[!dir].tuple.src.l3num,
- &ct->tuplehash[!dir].tuple.src.u3,
- &ct->tuplehash[!dir].tuple.dst.u3,
- IPPROTO_UDP, NULL, &rtcp_port);
+ nf_ct_expect_init(rtcp_exp, ct->tuplehash[!dir].tuple.src.l3num,
+ &ct->tuplehash[!dir].tuple.src.u3,
+ &ct->tuplehash[!dir].tuple.dst.u3,
+ IPPROTO_UDP, NULL, &rtcp_port);
if (memcmp(&ct->tuplehash[dir].tuple.src.u3,
&ct->tuplehash[!dir].tuple.dst.u3,
ret = nat_rtp_rtcp(pskb, ct, ctinfo, data, dataoff,
taddr, port, rtp_port, rtp_exp, rtcp_exp);
} else { /* Conntrack only */
- if (nf_conntrack_expect_related(rtp_exp) == 0) {
- if (nf_conntrack_expect_related(rtcp_exp) == 0) {
- DEBUGP("nf_ct_h323: expect RTP ");
+ if (nf_ct_expect_related(rtp_exp) == 0) {
+ if (nf_ct_expect_related(rtcp_exp) == 0) {
+ pr_debug("nf_ct_h323: expect RTP ");
NF_CT_DUMP_TUPLE(&rtp_exp->tuple);
- DEBUGP("nf_ct_h323: expect RTCP ");
+ pr_debug("nf_ct_h323: expect RTCP ");
NF_CT_DUMP_TUPLE(&rtcp_exp->tuple);
} else {
- nf_conntrack_unexpect_related(rtp_exp);
+ nf_ct_unexpect_related(rtp_exp);
ret = -1;
}
} else
ret = -1;
}
- nf_conntrack_expect_put(rtp_exp);
- nf_conntrack_expect_put(rtcp_exp);
+ nf_ct_expect_put(rtp_exp);
+ nf_ct_expect_put(rtcp_exp);
return ret;
}
return 0;
/* Create expect for T.120 connections */
- if ((exp = nf_conntrack_expect_alloc(ct)) == NULL)
+ if ((exp = nf_ct_expect_alloc(ct)) == NULL)
return -1;
- nf_conntrack_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
- &ct->tuplehash[!dir].tuple.src.u3,
- &ct->tuplehash[!dir].tuple.dst.u3,
- IPPROTO_TCP, NULL, &port);
+ nf_ct_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
+ &ct->tuplehash[!dir].tuple.src.u3,
+ &ct->tuplehash[!dir].tuple.dst.u3,
+ IPPROTO_TCP, NULL, &port);
exp->flags = NF_CT_EXPECT_PERMANENT; /* Accept multiple channels */
if (memcmp(&ct->tuplehash[dir].tuple.src.u3,
ret = nat_t120(pskb, ct, ctinfo, data, dataoff, taddr,
port, exp);
} else { /* Conntrack only */
- if (nf_conntrack_expect_related(exp) == 0) {
- DEBUGP("nf_ct_h323: expect T.120 ");
+ if (nf_ct_expect_related(exp) == 0) {
+ pr_debug("nf_ct_h323: expect T.120 ");
NF_CT_DUMP_TUPLE(&exp->tuple);
} else
ret = -1;
}
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return ret;
}
{
int ret;
- DEBUGP("nf_ct_h323: OpenLogicalChannel\n");
+ pr_debug("nf_ct_h323: OpenLogicalChannel\n");
if (olc->forwardLogicalChannelParameters.multiplexParameters.choice ==
eOpenLogicalChannel_forwardLogicalChannelParameters_multiplexParameters_h2250LogicalChannelParameters)
H2250LogicalChannelAckParameters *ack;
int ret;
- DEBUGP("nf_ct_h323: OpenLogicalChannelAck\n");
+ pr_debug("nf_ct_h323: OpenLogicalChannelAck\n");
if ((olca->options &
eOpenLogicalChannelAck_reverseLogicalChannelParameters) &&
return process_olc(pskb, ct, ctinfo, data, dataoff,
&mscm->request.openLogicalChannel);
}
- DEBUGP("nf_ct_h323: H.245 Request %d\n",
- mscm->request.choice);
+ pr_debug("nf_ct_h323: H.245 Request %d\n",
+ mscm->request.choice);
break;
case eMultimediaSystemControlMessage_response:
if (mscm->response.choice ==
&mscm->response.
openLogicalChannelAck);
}
- DEBUGP("nf_ct_h323: H.245 Response %d\n",
- mscm->response.choice);
+ pr_debug("nf_ct_h323: H.245 Response %d\n",
+ mscm->response.choice);
break;
default:
- DEBUGP("nf_ct_h323: H.245 signal %d\n", mscm->choice);
+ pr_debug("nf_ct_h323: H.245 signal %d\n", mscm->choice);
break;
}
ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
return NF_ACCEPT;
}
- DEBUGP("nf_ct_h245: skblen = %u\n", (*pskb)->len);
+ pr_debug("nf_ct_h245: skblen = %u\n", (*pskb)->len);
spin_lock_bh(&nf_h323_lock);
/* Process each TPKT */
while (get_tpkt_data(pskb, protoff, ct, ctinfo,
&data, &datalen, &dataoff)) {
- DEBUGP("nf_ct_h245: TPKT len=%d ", datalen);
+ pr_debug("nf_ct_h245: TPKT len=%d ", datalen);
NF_CT_DUMP_TUPLE(&ct->tuplehash[CTINFO2DIR(ctinfo)].tuple);
/* Decode H.245 signal */
ret = DecodeMultimediaSystemControlMessage(data, datalen,
&mscm);
if (ret < 0) {
- if (net_ratelimit())
- printk("nf_ct_h245: decoding error: %s\n",
- ret == H323_ERROR_BOUND ?
- "out of bound" : "out of range");
+ pr_debug("nf_ct_h245: decoding error: %s\n",
+ ret == H323_ERROR_BOUND ?
+ "out of bound" : "out of range");
/* We don't drop when decoding error */
break;
}
.max_expected = H323_RTP_CHANNEL_MAX * 4 + 2 /* T.120 */,
.timeout = 240,
.tuple.dst.protonum = IPPROTO_UDP,
- .mask.src.u.udp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
.help = h245_help
};
return 0;
/* Create expect for h245 connection */
- if ((exp = nf_conntrack_expect_alloc(ct)) == NULL)
+ if ((exp = nf_ct_expect_alloc(ct)) == NULL)
return -1;
- nf_conntrack_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
- &ct->tuplehash[!dir].tuple.src.u3,
- &ct->tuplehash[!dir].tuple.dst.u3,
- IPPROTO_TCP, NULL, &port);
+ nf_ct_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
+ &ct->tuplehash[!dir].tuple.src.u3,
+ &ct->tuplehash[!dir].tuple.dst.u3,
+ IPPROTO_TCP, NULL, &port);
exp->helper = &nf_conntrack_helper_h245;
if (memcmp(&ct->tuplehash[dir].tuple.src.u3,
ret = nat_h245(pskb, ct, ctinfo, data, dataoff, taddr,
port, exp);
} else { /* Conntrack only */
- if (nf_conntrack_expect_related(exp) == 0) {
- DEBUGP("nf_ct_q931: expect H.245 ");
+ if (nf_ct_expect_related(exp) == 0) {
+ pr_debug("nf_ct_q931: expect H.245 ");
NF_CT_DUMP_TUPLE(&exp->tuple);
} else
ret = -1;
}
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return ret;
}
if (callforward_filter &&
callforward_do_filter(&addr, &ct->tuplehash[!dir].tuple.src.u3,
ct->tuplehash[!dir].tuple.src.l3num)) {
- DEBUGP("nf_ct_q931: Call Forwarding not tracked\n");
+ pr_debug("nf_ct_q931: Call Forwarding not tracked\n");
return 0;
}
/* Create expect for the second call leg */
- if ((exp = nf_conntrack_expect_alloc(ct)) == NULL)
+ if ((exp = nf_ct_expect_alloc(ct)) == NULL)
return -1;
- nf_conntrack_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
- &ct->tuplehash[!dir].tuple.src.u3, &addr,
- IPPROTO_TCP, NULL, &port);
+ nf_ct_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
+ &ct->tuplehash[!dir].tuple.src.u3, &addr,
+ IPPROTO_TCP, NULL, &port);
exp->helper = nf_conntrack_helper_q931;
if (memcmp(&ct->tuplehash[dir].tuple.src.u3,
ret = nat_callforwarding(pskb, ct, ctinfo, data, dataoff,
taddr, port, exp);
} else { /* Conntrack only */
- if (nf_conntrack_expect_related(exp) == 0) {
- DEBUGP("nf_ct_q931: expect Call Forwarding ");
+ if (nf_ct_expect_related(exp) == 0) {
+ pr_debug("nf_ct_q931: expect Call Forwarding ");
NF_CT_DUMP_TUPLE(&exp->tuple);
} else
ret = -1;
}
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return ret;
}
union nf_conntrack_address addr;
typeof(set_h225_addr_hook) set_h225_addr;
- DEBUGP("nf_ct_q931: Setup\n");
+ pr_debug("nf_ct_q931: Setup\n");
if (setup->options & eSetup_UUIE_h245Address) {
ret = expect_h245(pskb, ct, ctinfo, data, dataoff,
get_h225_addr(ct, *data, &setup->destCallSignalAddress,
&addr, &port) &&
memcmp(&addr, &ct->tuplehash[!dir].tuple.src.u3, sizeof(addr))) {
- DEBUGP("nf_ct_q931: set destCallSignalAddress "
- NIP6_FMT ":%hu->" NIP6_FMT ":%hu\n",
- NIP6(*(struct in6_addr *)&addr), ntohs(port),
- NIP6(*(struct in6_addr *)&ct->tuplehash[!dir].tuple.src.u3),
- ntohs(ct->tuplehash[!dir].tuple.src.u.tcp.port));
+ pr_debug("nf_ct_q931: set destCallSignalAddress "
+ NIP6_FMT ":%hu->" NIP6_FMT ":%hu\n",
+ NIP6(*(struct in6_addr *)&addr), ntohs(port),
+ NIP6(*(struct in6_addr *)&ct->tuplehash[!dir].tuple.src.u3),
+ ntohs(ct->tuplehash[!dir].tuple.src.u.tcp.port));
ret = set_h225_addr(pskb, data, dataoff,
&setup->destCallSignalAddress,
&ct->tuplehash[!dir].tuple.src.u3,
get_h225_addr(ct, *data, &setup->sourceCallSignalAddress,
&addr, &port) &&
memcmp(&addr, &ct->tuplehash[!dir].tuple.dst.u3, sizeof(addr))) {
- DEBUGP("nf_ct_q931: set sourceCallSignalAddress "
- NIP6_FMT ":%hu->" NIP6_FMT ":%hu\n",
- NIP6(*(struct in6_addr *)&addr), ntohs(port),
- NIP6(*(struct in6_addr *)&ct->tuplehash[!dir].tuple.dst.u3),
- ntohs(ct->tuplehash[!dir].tuple.dst.u.tcp.port));
+ pr_debug("nf_ct_q931: set sourceCallSignalAddress "
+ NIP6_FMT ":%hu->" NIP6_FMT ":%hu\n",
+ NIP6(*(struct in6_addr *)&addr), ntohs(port),
+ NIP6(*(struct in6_addr *)&ct->tuplehash[!dir].tuple.dst.u3),
+ ntohs(ct->tuplehash[!dir].tuple.dst.u.tcp.port));
ret = set_h225_addr(pskb, data, dataoff,
&setup->sourceCallSignalAddress,
&ct->tuplehash[!dir].tuple.dst.u3,
int ret;
int i;
- DEBUGP("nf_ct_q931: CallProceeding\n");
+ pr_debug("nf_ct_q931: CallProceeding\n");
if (callproc->options & eCallProceeding_UUIE_h245Address) {
ret = expect_h245(pskb, ct, ctinfo, data, dataoff,
int ret;
int i;
- DEBUGP("nf_ct_q931: Connect\n");
+ pr_debug("nf_ct_q931: Connect\n");
if (connect->options & eConnect_UUIE_h245Address) {
ret = expect_h245(pskb, ct, ctinfo, data, dataoff,
int ret;
int i;
- DEBUGP("nf_ct_q931: Alerting\n");
+ pr_debug("nf_ct_q931: Alerting\n");
if (alert->options & eAlerting_UUIE_h245Address) {
ret = expect_h245(pskb, ct, ctinfo, data, dataoff,
int ret;
int i;
- DEBUGP("nf_ct_q931: Facility\n");
+ pr_debug("nf_ct_q931: Facility\n");
if (facility->reason.choice == eFacilityReason_callForwarded) {
if (facility->options & eFacility_UUIE_alternativeAddress)
int ret;
int i;
- DEBUGP("nf_ct_q931: Progress\n");
+ pr_debug("nf_ct_q931: Progress\n");
if (progress->options & eProgress_UUIE_h245Address) {
ret = expect_h245(pskb, ct, ctinfo, data, dataoff,
&pdu->h323_message_body.progress);
break;
default:
- DEBUGP("nf_ct_q931: Q.931 signal %d\n",
- pdu->h323_message_body.choice);
+ pr_debug("nf_ct_q931: Q.931 signal %d\n",
+ pdu->h323_message_body.choice);
break;
}
ctinfo != IP_CT_ESTABLISHED + IP_CT_IS_REPLY) {
return NF_ACCEPT;
}
- DEBUGP("nf_ct_q931: skblen = %u\n", (*pskb)->len);
+ pr_debug("nf_ct_q931: skblen = %u\n", (*pskb)->len);
spin_lock_bh(&nf_h323_lock);
/* Process each TPKT */
while (get_tpkt_data(pskb, protoff, ct, ctinfo,
&data, &datalen, &dataoff)) {
- DEBUGP("nf_ct_q931: TPKT len=%d ", datalen);
+ pr_debug("nf_ct_q931: TPKT len=%d ", datalen);
NF_CT_DUMP_TUPLE(&ct->tuplehash[CTINFO2DIR(ctinfo)].tuple);
/* Decode Q.931 signal */
ret = DecodeQ931(data, datalen, &q931);
if (ret < 0) {
- if (net_ratelimit())
- printk("nf_ct_q931: decoding error: %s\n",
- ret == H323_ERROR_BOUND ?
- "out of bound" : "out of range");
+ pr_debug("nf_ct_q931: decoding error: %s\n",
+ ret == H323_ERROR_BOUND ?
+ "out of bound" : "out of range");
/* We don't drop when decoding error */
break;
}
.tuple.src.l3num = AF_INET,
.tuple.src.u.tcp.port = __constant_htons(Q931_PORT),
.tuple.dst.protonum = IPPROTO_TCP,
- .mask.src.l3num = 0xFFFF,
- .mask.src.u.tcp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
.help = q931_help
},
{
.tuple.src.l3num = AF_INET6,
.tuple.src.u.tcp.port = __constant_htons(Q931_PORT),
.tuple.dst.protonum = IPPROTO_TCP,
- .mask.src.l3num = 0xFFFF,
- .mask.src.u.tcp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
.help = q931_help
},
};
tuple.dst.u.tcp.port = port;
tuple.dst.protonum = IPPROTO_TCP;
- exp = __nf_conntrack_expect_find(&tuple);
+ exp = __nf_ct_expect_find(&tuple);
if (exp && exp->master == ct)
return exp;
return NULL;
return 0;
/* Create expect for Q.931 */
- if ((exp = nf_conntrack_expect_alloc(ct)) == NULL)
+ if ((exp = nf_ct_expect_alloc(ct)) == NULL)
return -1;
- nf_conntrack_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
- gkrouted_only ? /* only accept calls from GK? */
- &ct->tuplehash[!dir].tuple.src.u3 :
- NULL,
- &ct->tuplehash[!dir].tuple.dst.u3,
- IPPROTO_TCP, NULL, &port);
+ nf_ct_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
+ gkrouted_only ? /* only accept calls from GK? */
+ &ct->tuplehash[!dir].tuple.src.u3 : NULL,
+ &ct->tuplehash[!dir].tuple.dst.u3,
+ IPPROTO_TCP, NULL, &port);
exp->helper = nf_conntrack_helper_q931;
exp->flags = NF_CT_EXPECT_PERMANENT; /* Accept multiple calls */
if (nat_q931 && ct->status & IPS_NAT_MASK) { /* Need NAT */
ret = nat_q931(pskb, ct, ctinfo, data, taddr, i, port, exp);
} else { /* Conntrack only */
- if (nf_conntrack_expect_related(exp) == 0) {
- DEBUGP("nf_ct_ras: expect Q.931 ");
+ if (nf_ct_expect_related(exp) == 0) {
+ pr_debug("nf_ct_ras: expect Q.931 ");
NF_CT_DUMP_TUPLE(&exp->tuple);
/* Save port for looking up expect in processing RCF */
ret = -1;
}
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return ret;
}
{
typeof(set_ras_addr_hook) set_ras_addr;
- DEBUGP("nf_ct_ras: GRQ\n");
+ pr_debug("nf_ct_ras: GRQ\n");
set_ras_addr = rcu_dereference(set_ras_addr_hook);
if (set_ras_addr && ct->status & IPS_NAT_MASK) /* NATed */
union nf_conntrack_address addr;
struct nf_conntrack_expect *exp;
- DEBUGP("nf_ct_ras: GCF\n");
+ pr_debug("nf_ct_ras: GCF\n");
if (!get_h225_addr(ct, *data, &gcf->rasAddress, &addr, &port))
return 0;
return 0;
/* Need new expect */
- if ((exp = nf_conntrack_expect_alloc(ct)) == NULL)
+ if ((exp = nf_ct_expect_alloc(ct)) == NULL)
return -1;
- nf_conntrack_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
- &ct->tuplehash[!dir].tuple.src.u3, &addr,
- IPPROTO_UDP, NULL, &port);
+ nf_ct_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
+ &ct->tuplehash[!dir].tuple.src.u3, &addr,
+ IPPROTO_UDP, NULL, &port);
exp->helper = nf_conntrack_helper_ras;
- if (nf_conntrack_expect_related(exp) == 0) {
- DEBUGP("nf_ct_ras: expect RAS ");
+ if (nf_ct_expect_related(exp) == 0) {
+ pr_debug("nf_ct_ras: expect RAS ");
NF_CT_DUMP_TUPLE(&exp->tuple);
} else
ret = -1;
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return ret;
}
int ret;
typeof(set_ras_addr_hook) set_ras_addr;
- DEBUGP("nf_ct_ras: RRQ\n");
+ pr_debug("nf_ct_ras: RRQ\n");
ret = expect_q931(pskb, ct, ctinfo, data,
rrq->callSignalAddress.item,
}
if (rrq->options & eRegistrationRequest_timeToLive) {
- DEBUGP("nf_ct_ras: RRQ TTL = %u seconds\n", rrq->timeToLive);
+ pr_debug("nf_ct_ras: RRQ TTL = %u seconds\n", rrq->timeToLive);
info->timeout = rrq->timeToLive;
} else
info->timeout = default_rrq_ttl;
struct nf_conntrack_expect *exp;
typeof(set_sig_addr_hook) set_sig_addr;
- DEBUGP("nf_ct_ras: RCF\n");
+ pr_debug("nf_ct_ras: RCF\n");
set_sig_addr = rcu_dereference(set_sig_addr_hook);
if (set_sig_addr && ct->status & IPS_NAT_MASK) {
}
if (rcf->options & eRegistrationConfirm_timeToLive) {
- DEBUGP("nf_ct_ras: RCF TTL = %u seconds\n", rcf->timeToLive);
+ pr_debug("nf_ct_ras: RCF TTL = %u seconds\n", rcf->timeToLive);
info->timeout = rcf->timeToLive;
}
if (info->timeout > 0) {
- DEBUGP
- ("nf_ct_ras: set RAS connection timeout to %u seconds\n",
- info->timeout);
+ pr_debug("nf_ct_ras: set RAS connection timeout to "
+ "%u seconds\n", info->timeout);
nf_ct_refresh(ct, *pskb, info->timeout * HZ);
/* Set expect timeout */
exp = find_expect(ct, &ct->tuplehash[dir].tuple.dst.u3,
info->sig_port[!dir]);
if (exp) {
- DEBUGP("nf_ct_ras: set Q.931 expect "
- "timeout to %u seconds for",
- info->timeout);
+ pr_debug("nf_ct_ras: set Q.931 expect "
+ "timeout to %u seconds for",
+ info->timeout);
NF_CT_DUMP_TUPLE(&exp->tuple);
set_expect_timeout(exp, info->timeout);
}
int ret;
typeof(set_sig_addr_hook) set_sig_addr;
- DEBUGP("nf_ct_ras: URQ\n");
+ pr_debug("nf_ct_ras: URQ\n");
set_sig_addr = rcu_dereference(set_sig_addr_hook);
if (set_sig_addr && ct->status & IPS_NAT_MASK) {
union nf_conntrack_address addr;
typeof(set_h225_addr_hook) set_h225_addr;
- DEBUGP("nf_ct_ras: ARQ\n");
+ pr_debug("nf_ct_ras: ARQ\n");
set_h225_addr = rcu_dereference(set_h225_addr_hook);
if ((arq->options & eAdmissionRequest_destCallSignalAddress) &&
struct nf_conntrack_expect *exp;
typeof(set_sig_addr_hook) set_sig_addr;
- DEBUGP("nf_ct_ras: ACF\n");
+ pr_debug("nf_ct_ras: ACF\n");
if (!get_h225_addr(ct, *data, &acf->destCallSignalAddress,
&addr, &port))
}
/* Need new expect */
- if ((exp = nf_conntrack_expect_alloc(ct)) == NULL)
+ if ((exp = nf_ct_expect_alloc(ct)) == NULL)
return -1;
- nf_conntrack_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
- &ct->tuplehash[!dir].tuple.src.u3, &addr,
- IPPROTO_TCP, NULL, &port);
+ nf_ct_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
+ &ct->tuplehash[!dir].tuple.src.u3, &addr,
+ IPPROTO_TCP, NULL, &port);
exp->flags = NF_CT_EXPECT_PERMANENT;
exp->helper = nf_conntrack_helper_q931;
- if (nf_conntrack_expect_related(exp) == 0) {
- DEBUGP("nf_ct_ras: expect Q.931 ");
+ if (nf_ct_expect_related(exp) == 0) {
+ pr_debug("nf_ct_ras: expect Q.931 ");
NF_CT_DUMP_TUPLE(&exp->tuple);
} else
ret = -1;
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return ret;
}
{
typeof(set_ras_addr_hook) set_ras_addr;
- DEBUGP("nf_ct_ras: LRQ\n");
+ pr_debug("nf_ct_ras: LRQ\n");
set_ras_addr = rcu_dereference(set_ras_addr_hook);
if (set_ras_addr && ct->status & IPS_NAT_MASK)
union nf_conntrack_address addr;
struct nf_conntrack_expect *exp;
- DEBUGP("nf_ct_ras: LCF\n");
+ pr_debug("nf_ct_ras: LCF\n");
if (!get_h225_addr(ct, *data, &lcf->callSignalAddress,
&addr, &port))
return 0;
/* Need new expect for call signal */
- if ((exp = nf_conntrack_expect_alloc(ct)) == NULL)
+ if ((exp = nf_ct_expect_alloc(ct)) == NULL)
return -1;
- nf_conntrack_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
- &ct->tuplehash[!dir].tuple.src.u3, &addr,
- IPPROTO_TCP, NULL, &port);
+ nf_ct_expect_init(exp, ct->tuplehash[!dir].tuple.src.l3num,
+ &ct->tuplehash[!dir].tuple.src.u3, &addr,
+ IPPROTO_TCP, NULL, &port);
exp->flags = NF_CT_EXPECT_PERMANENT;
exp->helper = nf_conntrack_helper_q931;
- if (nf_conntrack_expect_related(exp) == 0) {
- DEBUGP("nf_ct_ras: expect Q.931 ");
+ if (nf_ct_expect_related(exp) == 0) {
+ pr_debug("nf_ct_ras: expect Q.931 ");
NF_CT_DUMP_TUPLE(&exp->tuple);
} else
ret = -1;
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
/* Ignore rasAddress */
typeof(set_ras_addr_hook) set_ras_addr;
typeof(set_sig_addr_hook) set_sig_addr;
- DEBUGP("nf_ct_ras: IRR\n");
+ pr_debug("nf_ct_ras: IRR\n");
set_ras_addr = rcu_dereference(set_ras_addr_hook);
if (set_ras_addr && ct->status & IPS_NAT_MASK) {
return process_irr(pskb, ct, ctinfo, data,
&ras->infoRequestResponse);
default:
- DEBUGP("nf_ct_ras: RAS message %d\n", ras->choice);
+ pr_debug("nf_ct_ras: RAS message %d\n", ras->choice);
break;
}
int datalen = 0;
int ret;
- DEBUGP("nf_ct_ras: skblen = %u\n", (*pskb)->len);
+ pr_debug("nf_ct_ras: skblen = %u\n", (*pskb)->len);
spin_lock_bh(&nf_h323_lock);
data = get_udp_data(pskb, protoff, &datalen);
if (data == NULL)
goto accept;
- DEBUGP("nf_ct_ras: RAS message len=%d ", datalen);
+ pr_debug("nf_ct_ras: RAS message len=%d ", datalen);
NF_CT_DUMP_TUPLE(&ct->tuplehash[CTINFO2DIR(ctinfo)].tuple);
/* Decode RAS message */
ret = DecodeRasMessage(data, datalen, &ras);
if (ret < 0) {
- if (net_ratelimit())
- printk("nf_ct_ras: decoding error: %s\n",
- ret == H323_ERROR_BOUND ?
- "out of bound" : "out of range");
+ pr_debug("nf_ct_ras: decoding error: %s\n",
+ ret == H323_ERROR_BOUND ?
+ "out of bound" : "out of range");
goto accept;
}
.tuple.src.l3num = AF_INET,
.tuple.src.u.udp.port = __constant_htons(RAS_PORT),
.tuple.dst.protonum = IPPROTO_UDP,
- .mask.src.l3num = 0xFFFF,
- .mask.src.u.udp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
.help = ras_help,
},
{
.tuple.src.l3num = AF_INET6,
.tuple.src.u.udp.port = __constant_htons(RAS_PORT),
.tuple.dst.protonum = IPPROTO_UDP,
- .mask.src.l3num = 0xFFFF,
- .mask.src.u.udp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
.help = ras_help,
},
};
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[1]);
nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]);
kfree(h323_buffer);
- DEBUGP("nf_ct_h323: fini\n");
+ pr_debug("nf_ct_h323: fini\n");
}
/****************************************************************************/
ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[1]);
if (ret < 0)
goto err4;
- DEBUGP("nf_ct_h323: init success\n");
+ pr_debug("nf_ct_h323: init success\n");
return 0;
err4:
#include <net/netfilter/nf_conntrack_l4proto.h>
#include <net/netfilter/nf_conntrack_helper.h>
#include <net/netfilter/nf_conntrack_core.h>
+#include <net/netfilter/nf_conntrack_extend.h>
-static __read_mostly LIST_HEAD(helpers);
+static struct hlist_head *nf_ct_helper_hash __read_mostly;
+static unsigned int nf_ct_helper_hsize __read_mostly;
+static unsigned int nf_ct_helper_count __read_mostly;
+static int nf_ct_helper_vmalloc;
+
+
+/* Stupid hash, but collision free for the default registrations of the
+ * helpers currently in the kernel. */
+static unsigned int helper_hash(const struct nf_conntrack_tuple *tuple)
+{
+ return (((tuple->src.l3num << 8) | tuple->dst.protonum) ^
+ tuple->src.u.all) % nf_ct_helper_hsize;
+}
struct nf_conntrack_helper *
__nf_ct_helper_find(const struct nf_conntrack_tuple *tuple)
{
- struct nf_conntrack_helper *h;
+ struct nf_conntrack_helper *helper;
+ struct nf_conntrack_tuple_mask mask = { .src.u.all = htons(0xFFFF) };
+ struct hlist_node *n;
+ unsigned int h;
+
+ if (!nf_ct_helper_count)
+ return NULL;
- list_for_each_entry(h, &helpers, list) {
- if (nf_ct_tuple_mask_cmp(tuple, &h->tuple, &h->mask))
- return h;
+ h = helper_hash(tuple);
+ hlist_for_each_entry(helper, n, &nf_ct_helper_hash[h], hnode) {
+ if (nf_ct_tuple_src_mask_cmp(tuple, &helper->tuple, &mask))
+ return helper;
}
return NULL;
}
struct nf_conntrack_helper *
-nf_ct_helper_find_get( const struct nf_conntrack_tuple *tuple)
+nf_ct_helper_find_get(const struct nf_conntrack_tuple *tuple)
{
struct nf_conntrack_helper *helper;
__nf_conntrack_helper_find_byname(const char *name)
{
struct nf_conntrack_helper *h;
+ struct hlist_node *n;
+ unsigned int i;
- list_for_each_entry(h, &helpers, list) {
- if (!strcmp(h->name, name))
- return h;
+ for (i = 0; i < nf_ct_helper_hsize; i++) {
+ hlist_for_each_entry(h, n, &nf_ct_helper_hash[i], hnode) {
+ if (!strcmp(h->name, name))
+ return h;
+ }
}
-
return NULL;
}
EXPORT_SYMBOL_GPL(__nf_conntrack_helper_find_byname);
+struct nf_conn_help *nf_ct_helper_ext_add(struct nf_conn *ct, gfp_t gfp)
+{
+ struct nf_conn_help *help;
+
+ help = nf_ct_ext_add(ct, NF_CT_EXT_HELPER, gfp);
+ if (help)
+ INIT_HLIST_HEAD(&help->expectations);
+ else
+ pr_debug("failed to add helper extension area");
+ return help;
+}
+EXPORT_SYMBOL_GPL(nf_ct_helper_ext_add);
+
static inline int unhelp(struct nf_conntrack_tuple_hash *i,
const struct nf_conntrack_helper *me)
{
int nf_conntrack_helper_register(struct nf_conntrack_helper *me)
{
- int size, ret;
+ unsigned int h = helper_hash(&me->tuple);
BUG_ON(me->timeout == 0);
- size = ALIGN(sizeof(struct nf_conn), __alignof__(struct nf_conn_help)) +
- sizeof(struct nf_conn_help);
- ret = nf_conntrack_register_cache(NF_CT_F_HELP, "nf_conntrack:help",
- size);
- if (ret < 0) {
- printk(KERN_ERR "nf_conntrack_helper_register: Unable to create slab cache for conntracks\n");
- return ret;
- }
write_lock_bh(&nf_conntrack_lock);
- list_add(&me->list, &helpers);
+ hlist_add_head(&me->hnode, &nf_ct_helper_hash[h]);
+ nf_ct_helper_count++;
write_unlock_bh(&nf_conntrack_lock);
return 0;
void nf_conntrack_helper_unregister(struct nf_conntrack_helper *me)
{
- unsigned int i;
struct nf_conntrack_tuple_hash *h;
- struct nf_conntrack_expect *exp, *tmp;
+ struct nf_conntrack_expect *exp;
+ struct hlist_node *n, *next;
+ unsigned int i;
/* Need write lock here, to delete helper. */
write_lock_bh(&nf_conntrack_lock);
- list_del(&me->list);
+ hlist_del(&me->hnode);
+ nf_ct_helper_count--;
/* Get rid of expectations */
- list_for_each_entry_safe(exp, tmp, &nf_conntrack_expect_list, list) {
- struct nf_conn_help *help = nfct_help(exp->master);
- if ((help->helper == me || exp->helper == me) &&
- del_timer(&exp->timeout)) {
- nf_ct_unlink_expect(exp);
- nf_conntrack_expect_put(exp);
+ for (i = 0; i < nf_ct_expect_hsize; i++) {
+ hlist_for_each_entry_safe(exp, n, next,
+ &nf_ct_expect_hash[i], hnode) {
+ struct nf_conn_help *help = nfct_help(exp->master);
+ if ((help->helper == me || exp->helper == me) &&
+ del_timer(&exp->timeout)) {
+ nf_ct_unlink_expect(exp);
+ nf_ct_expect_put(exp);
+ }
}
}
/* Get rid of expecteds, set helpers to NULL. */
- list_for_each_entry(h, &unconfirmed, list)
+ hlist_for_each_entry(h, n, &unconfirmed, hnode)
unhelp(h, me);
for (i = 0; i < nf_conntrack_htable_size; i++) {
- list_for_each_entry(h, &nf_conntrack_hash[i], list)
+ hlist_for_each_entry(h, n, &nf_conntrack_hash[i], hnode)
unhelp(h, me);
}
write_unlock_bh(&nf_conntrack_lock);
synchronize_net();
}
EXPORT_SYMBOL_GPL(nf_conntrack_helper_unregister);
+
+static struct nf_ct_ext_type helper_extend __read_mostly = {
+ .len = sizeof(struct nf_conn_help),
+ .align = __alignof__(struct nf_conn_help),
+ .id = NF_CT_EXT_HELPER,
+};
+
+int nf_conntrack_helper_init()
+{
+ int err;
+
+ nf_ct_helper_hsize = 1; /* gets rounded up to use one page */
+ nf_ct_helper_hash = nf_ct_alloc_hashtable(&nf_ct_helper_hsize,
+ &nf_ct_helper_vmalloc);
+ if (!nf_ct_helper_hash)
+ return -ENOMEM;
+
+ err = nf_ct_extend_register(&helper_extend);
+ if (err < 0)
+ goto err1;
+
+ return 0;
+
+err1:
+ nf_ct_free_hashtable(nf_ct_helper_hash, nf_ct_helper_vmalloc,
+ nf_ct_helper_hsize);
+ return err;
+}
+
+void nf_conntrack_helper_fini()
+{
+ nf_ct_extend_unregister(&helper_extend);
+ nf_ct_free_hashtable(nf_ct_helper_hash, nf_ct_helper_vmalloc,
+ nf_ct_helper_hsize);
+}
#include <linux/moduleparam.h>
#include <linux/skbuff.h>
#include <linux/in.h>
+#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/netfilter.h>
#define MINMATCHLEN 5
-#if 0
-#define DEBUGP(format, args...) printk(KERN_DEBUG "%s:%s:" format, \
- __FILE__, __FUNCTION__ , ## args)
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* tries to get the ip_addr and port out of a dcc command
* return value: -1 on failure, 0 on success
* data pointer to first byte of DCC command data
struct nf_conn *ct, enum ip_conntrack_info ctinfo)
{
unsigned int dataoff;
+ struct iphdr *iph;
struct tcphdr _tcph, *th;
char *data, *data_limit, *ib_ptr;
int dir = CTINFO2DIR(ctinfo);
data += 5;
/* we have at least (19+MINMATCHLEN)-5 bytes valid data left */
- DEBUGP("DCC found in master %u.%u.%u.%u:%u %u.%u.%u.%u:%u...\n",
- NIPQUAD(iph->saddr), ntohs(th->source),
- NIPQUAD(iph->daddr), ntohs(th->dest));
+ iph = ip_hdr(*pskb);
+ pr_debug("DCC found in master %u.%u.%u.%u:%u %u.%u.%u.%u:%u\n",
+ NIPQUAD(iph->saddr), ntohs(th->source),
+ NIPQUAD(iph->daddr), ntohs(th->dest));
for (i = 0; i < ARRAY_SIZE(dccprotos); i++) {
if (memcmp(data, dccprotos[i], strlen(dccprotos[i]))) {
continue;
}
data += strlen(dccprotos[i]);
- DEBUGP("DCC %s detected\n", dccprotos[i]);
+ pr_debug("DCC %s detected\n", dccprotos[i]);
/* we have at least
* (19+MINMATCHLEN)-5-dccprotos[i].matchlen bytes valid
* data left (== 14/13 bytes) */
if (parse_dcc((char *)data, data_limit, &dcc_ip,
&dcc_port, &addr_beg_p, &addr_end_p)) {
- DEBUGP("unable to parse dcc command\n");
+ pr_debug("unable to parse dcc command\n");
continue;
}
- DEBUGP("DCC bound ip/port: %u.%u.%u.%u:%u\n",
- HIPQUAD(dcc_ip), dcc_port);
+ pr_debug("DCC bound ip/port: %u.%u.%u.%u:%u\n",
+ HIPQUAD(dcc_ip), dcc_port);
/* dcc_ip can be the internal OR external (NAT'ed) IP */
tuple = &ct->tuplehash[dir].tuple;
continue;
}
- exp = nf_conntrack_expect_alloc(ct);
+ exp = nf_ct_expect_alloc(ct);
if (exp == NULL) {
ret = NF_DROP;
goto out;
}
tuple = &ct->tuplehash[!dir].tuple;
port = htons(dcc_port);
- nf_conntrack_expect_init(exp, tuple->src.l3num,
- NULL, &tuple->dst.u3,
- IPPROTO_TCP, NULL, &port);
+ nf_ct_expect_init(exp, tuple->src.l3num,
+ NULL, &tuple->dst.u3,
+ IPPROTO_TCP, NULL, &port);
nf_nat_irc = rcu_dereference(nf_nat_irc_hook);
if (nf_nat_irc && ct->status & IPS_NAT_MASK)
addr_beg_p - ib_ptr,
addr_end_p - addr_beg_p,
exp);
- else if (nf_conntrack_expect_related(exp) != 0)
+ else if (nf_ct_expect_related(exp) != 0)
ret = NF_DROP;
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
goto out;
}
}
irc[i].tuple.src.l3num = AF_INET;
irc[i].tuple.src.u.tcp.port = htons(ports[i]);
irc[i].tuple.dst.protonum = IPPROTO_TCP;
- irc[i].mask.src.l3num = 0xFFFF;
- irc[i].mask.src.u.tcp.port = htons(0xFFFF);
- irc[i].mask.dst.protonum = 0xFF;
irc[i].max_expected = max_dcc_channels;
irc[i].timeout = dcc_timeout;
irc[i].me = THIS_MODULE;
#include <net/netfilter/nf_conntrack_core.h>
#include <net/netfilter/ipv4/nf_conntrack_ipv4.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
static int generic_pkt_to_tuple(const struct sk_buff *skb, unsigned int nhoff,
struct nf_conntrack_tuple *tuple)
{
}
-static u_int32_t generic_get_features(const struct nf_conntrack_tuple *tuple)
-
-{
- return NF_CT_F_BASIC;
-}
-
struct nf_conntrack_l3proto nf_conntrack_l3proto_generic = {
.l3proto = PF_UNSPEC,
.name = "unknown",
.print_tuple = generic_print_tuple,
.print_conntrack = generic_print_conntrack,
.prepare = generic_prepare,
- .get_features = generic_get_features,
};
EXPORT_SYMBOL_GPL(nf_conntrack_l3proto_generic);
if (mask == 0)
goto out;
- exp = nf_conntrack_expect_alloc(ct);
+ exp = nf_ct_expect_alloc(ct);
if (exp == NULL)
goto out;
exp->mask.src.u3.ip = mask;
exp->mask.src.u.udp.port = htons(0xFFFF);
- exp->mask.dst.u3.ip = htonl(0xFFFFFFFF);
- exp->mask.dst.u.udp.port = htons(0xFFFF);
- exp->mask.dst.protonum = 0xFF;
exp->expectfn = NULL;
exp->flags = NF_CT_EXPECT_PERMANENT;
exp->helper = NULL;
- nf_conntrack_expect_related(exp);
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_related(exp);
+ nf_ct_expect_put(exp);
nf_ct_refresh(ct, *pskb, timeout * HZ);
out:
.tuple.src.l3num = AF_INET,
.tuple.src.u.udp.port = __constant_htons(NMBD_PORT),
.tuple.dst.protonum = IPPROTO_UDP,
- .mask.src.l3num = 0xFFFF,
- .mask.src.u.udp.port = __constant_htons(0xFFFF),
- .mask.dst.protonum = 0xFF,
.max_expected = 1,
.me = THIS_MODULE,
.help = help,
{
struct nf_conn *ct, *last;
struct nf_conntrack_tuple_hash *h;
- struct list_head *i;
+ struct hlist_node *n;
struct nfgenmsg *nfmsg = NLMSG_DATA(cb->nlh);
u_int8_t l3proto = nfmsg->nfgen_family;
last = (struct nf_conn *)cb->args[1];
for (; cb->args[0] < nf_conntrack_htable_size; cb->args[0]++) {
restart:
- list_for_each_prev(i, &nf_conntrack_hash[cb->args[0]]) {
- h = (struct nf_conntrack_tuple_hash *) i;
+ hlist_for_each_entry(h, n, &nf_conntrack_hash[cb->args[0]],
+ hnode) {
if (NF_CT_DIRECTION(h) != IP_CT_DIR_ORIGINAL)
continue;
ct = nf_ct_tuplehash_to_ctrack(h);
if (err < 0)
return err;
- h = nf_conntrack_find_get(&tuple, NULL);
+ h = nf_conntrack_find_get(&tuple);
if (!h)
return -ENOENT;
if (err < 0)
return err;
- h = nf_conntrack_find_get(&tuple, NULL);
+ h = nf_conntrack_find_get(&tuple);
if (!h)
return -ENOENT;
return 0;
}
- if (!help) {
- /* FIXME: we need to reallocate and rehash */
- return -EBUSY;
- }
-
helper = __nf_conntrack_helper_find_byname(helpname);
if (helper == NULL)
return -EINVAL;
- if (help->helper == helper)
- return 0;
-
- if (help->helper)
- return -EBUSY;
+ if (help) {
+ if (help->helper == helper)
+ return 0;
+ if (help->helper)
+ return -EBUSY;
+ /* need to zero data of old helper */
+ memset(&help->help, 0, sizeof(help->help));
+ } else {
+ help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
+ if (help == NULL)
+ return -ENOMEM;
+ }
- /* need to zero data of old helper */
- memset(&help->help, 0, sizeof(help->help));
rcu_assign_pointer(help->helper, helper);
return 0;
struct nf_conn *ct;
int err = -EINVAL;
struct nf_conn_help *help;
- struct nf_conntrack_helper *helper = NULL;
+ struct nf_conntrack_helper *helper;
ct = nf_conntrack_alloc(otuple, rtuple);
if (ct == NULL || IS_ERR(ct))
ct->mark = ntohl(*(__be32 *)NFA_DATA(cda[CTA_MARK-1]));
#endif
- help = nfct_help(ct);
- if (help) {
- helper = nf_ct_helper_find_get(rtuple);
+ helper = nf_ct_helper_find_get(rtuple);
+ if (helper) {
+ help = nf_ct_helper_ext_add(ct, GFP_KERNEL);
+ if (help == NULL) {
+ nf_ct_helper_put(helper);
+ err = -ENOMEM;
+ goto err;
+ }
/* not in hash table yet so not strictly necessary */
rcu_assign_pointer(help->helper, helper);
}
static inline int
ctnetlink_exp_dump_mask(struct sk_buff *skb,
const struct nf_conntrack_tuple *tuple,
- const struct nf_conntrack_tuple *mask)
+ const struct nf_conntrack_tuple_mask *mask)
{
int ret;
struct nf_conntrack_l3proto *l3proto;
struct nf_conntrack_l4proto *l4proto;
- struct nfattr *nest_parms = NFA_NEST(skb, CTA_EXPECT_MASK);
+ struct nf_conntrack_tuple m;
+ struct nfattr *nest_parms;
+
+ memset(&m, 0xFF, sizeof(m));
+ m.src.u.all = mask->src.u.all;
+ memcpy(&m.src.u3, &mask->src.u3, sizeof(m.src.u3));
+
+ nest_parms = NFA_NEST(skb, CTA_EXPECT_MASK);
l3proto = nf_ct_l3proto_find_get(tuple->src.l3num);
- ret = ctnetlink_dump_tuples_ip(skb, mask, l3proto);
+ ret = ctnetlink_dump_tuples_ip(skb, &m, l3proto);
nf_ct_l3proto_put(l3proto);
if (unlikely(ret < 0))
goto nfattr_failure;
l4proto = nf_ct_l4proto_find_get(tuple->src.l3num, tuple->dst.protonum);
- ret = ctnetlink_dump_tuples_proto(skb, mask, l4proto);
+ ret = ctnetlink_dump_tuples_proto(skb, &m, l4proto);
nf_ct_l4proto_put(l4proto);
if (unlikely(ret < 0))
goto nfattr_failure;
return NOTIFY_DONE;
}
#endif
+static int ctnetlink_exp_done(struct netlink_callback *cb)
+{
+ if (cb->args[1])
+ nf_ct_expect_put((struct nf_conntrack_expect *)cb->args[1]);
+ return 0;
+}
static int
ctnetlink_exp_dump_table(struct sk_buff *skb, struct netlink_callback *cb)
{
- struct nf_conntrack_expect *exp = NULL;
- struct list_head *i;
- u_int32_t *id = (u_int32_t *) &cb->args[0];
+ struct nf_conntrack_expect *exp, *last;
struct nfgenmsg *nfmsg = NLMSG_DATA(cb->nlh);
+ struct hlist_node *n;
u_int8_t l3proto = nfmsg->nfgen_family;
read_lock_bh(&nf_conntrack_lock);
- list_for_each_prev(i, &nf_conntrack_expect_list) {
- exp = (struct nf_conntrack_expect *) i;
- if (l3proto && exp->tuple.src.l3num != l3proto)
- continue;
- if (exp->id <= *id)
- continue;
- if (ctnetlink_exp_fill_info(skb, NETLINK_CB(cb->skb).pid,
- cb->nlh->nlmsg_seq,
- IPCTNL_MSG_EXP_NEW,
- 1, exp) < 0)
- goto out;
- *id = exp->id;
+ last = (struct nf_conntrack_expect *)cb->args[1];
+ for (; cb->args[0] < nf_ct_expect_hsize; cb->args[0]++) {
+restart:
+ hlist_for_each_entry(exp, n, &nf_ct_expect_hash[cb->args[0]],
+ hnode) {
+ if (l3proto && exp->tuple.src.l3num != l3proto)
+ continue;
+ if (cb->args[1]) {
+ if (exp != last)
+ continue;
+ cb->args[1] = 0;
+ }
+ if (ctnetlink_exp_fill_info(skb, NETLINK_CB(cb->skb).pid,
+ cb->nlh->nlmsg_seq,
+ IPCTNL_MSG_EXP_NEW,
+ 1, exp) < 0) {
+ atomic_inc(&exp->use);
+ cb->args[1] = (unsigned long)exp;
+ goto out;
+ }
+ }
+ if (cb->args[1]) {
+ cb->args[1] = 0;
+ goto restart;
+ }
}
out:
read_unlock_bh(&nf_conntrack_lock);
+ if (last)
+ nf_ct_expect_put(last);
return skb->len;
}
if (nlh->nlmsg_flags & NLM_F_DUMP) {
return netlink_dump_start(ctnl, skb, nlh,
ctnetlink_exp_dump_table,
- ctnetlink_done);
+ ctnetlink_exp_done);
}
if (cda[CTA_EXPECT_MASTER-1])
if (err < 0)
return err;
- exp = nf_conntrack_expect_find_get(&tuple);
+ exp = nf_ct_expect_find_get(&tuple);
if (!exp)
return -ENOENT;
if (cda[CTA_EXPECT_ID-1]) {
__be32 id = *(__be32 *)NFA_DATA(cda[CTA_EXPECT_ID-1]);
if (exp->id != ntohl(id)) {
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return -ENOENT;
}
}
if (err <= 0)
goto free;
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return netlink_unicast(ctnl, skb2, NETLINK_CB(skb).pid, MSG_DONTWAIT);
free:
kfree_skb(skb2);
out:
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return err;
}
ctnetlink_del_expect(struct sock *ctnl, struct sk_buff *skb,
struct nlmsghdr *nlh, struct nfattr *cda[])
{
- struct nf_conntrack_expect *exp, *tmp;
+ struct nf_conntrack_expect *exp;
struct nf_conntrack_tuple tuple;
struct nf_conntrack_helper *h;
struct nfgenmsg *nfmsg = NLMSG_DATA(nlh);
+ struct hlist_node *n, *next;
u_int8_t u3 = nfmsg->nfgen_family;
+ unsigned int i;
int err;
if (nfattr_bad_size(cda, CTA_EXPECT_MAX, cta_min_exp))
return err;
/* bump usage count to 2 */
- exp = nf_conntrack_expect_find_get(&tuple);
+ exp = nf_ct_expect_find_get(&tuple);
if (!exp)
return -ENOENT;
if (cda[CTA_EXPECT_ID-1]) {
__be32 id = *(__be32 *)NFA_DATA(cda[CTA_EXPECT_ID-1]);
if (exp->id != ntohl(id)) {
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return -ENOENT;
}
}
/* after list removal, usage count == 1 */
- nf_conntrack_unexpect_related(exp);
+ nf_ct_unexpect_related(exp);
/* have to put what we 'get' above.
* after this line usage count == 0 */
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
} else if (cda[CTA_EXPECT_HELP_NAME-1]) {
char *name = NFA_DATA(cda[CTA_EXPECT_HELP_NAME-1]);
+ struct nf_conn_help *m_help;
/* delete all expectations for this helper */
write_lock_bh(&nf_conntrack_lock);
write_unlock_bh(&nf_conntrack_lock);
return -EINVAL;
}
- list_for_each_entry_safe(exp, tmp, &nf_conntrack_expect_list,
- list) {
- struct nf_conn_help *m_help = nfct_help(exp->master);
- if (m_help->helper == h
- && del_timer(&exp->timeout)) {
- nf_ct_unlink_expect(exp);
- nf_conntrack_expect_put(exp);
+ for (i = 0; i < nf_ct_expect_hsize; i++) {
+ hlist_for_each_entry_safe(exp, n, next,
+ &nf_ct_expect_hash[i],
+ hnode) {
+ m_help = nfct_help(exp->master);
+ if (m_help->helper == h
+ && del_timer(&exp->timeout)) {
+ nf_ct_unlink_expect(exp);
+ nf_ct_expect_put(exp);
+ }
}
}
write_unlock_bh(&nf_conntrack_lock);
} else {
/* This basically means we have to flush everything*/
write_lock_bh(&nf_conntrack_lock);
- list_for_each_entry_safe(exp, tmp, &nf_conntrack_expect_list,
- list) {
- if (del_timer(&exp->timeout)) {
- nf_ct_unlink_expect(exp);
- nf_conntrack_expect_put(exp);
+ for (i = 0; i < nf_ct_expect_hsize; i++) {
+ hlist_for_each_entry_safe(exp, n, next,
+ &nf_ct_expect_hash[i],
+ hnode) {
+ if (del_timer(&exp->timeout)) {
+ nf_ct_unlink_expect(exp);
+ nf_ct_expect_put(exp);
+ }
}
}
write_unlock_bh(&nf_conntrack_lock);
return err;
/* Look for master conntrack of this expectation */
- h = nf_conntrack_find_get(&master_tuple, NULL);
+ h = nf_conntrack_find_get(&master_tuple);
if (!h)
return -ENOENT;
ct = nf_ct_tuplehash_to_ctrack(h);
goto out;
}
- exp = nf_conntrack_expect_alloc(ct);
+ exp = nf_ct_expect_alloc(ct);
if (!exp) {
err = -ENOMEM;
goto out;
exp->master = ct;
exp->helper = NULL;
memcpy(&exp->tuple, &tuple, sizeof(struct nf_conntrack_tuple));
- memcpy(&exp->mask, &mask, sizeof(struct nf_conntrack_tuple));
+ memcpy(&exp->mask.src.u3, &mask.src.u3, sizeof(exp->mask.src.u3));
+ exp->mask.src.u.all = mask.src.u.all;
- err = nf_conntrack_expect_related(exp);
- nf_conntrack_expect_put(exp);
+ err = nf_ct_expect_related(exp);
+ nf_ct_expect_put(exp);
out:
nf_ct_put(nf_ct_tuplehash_to_ctrack(h));
return err;
write_lock_bh(&nf_conntrack_lock);
- exp = __nf_conntrack_expect_find(&tuple);
+ exp = __nf_ct_expect_find(&tuple);
if (!exp) {
write_unlock_bh(&nf_conntrack_lock);
goto err_unreg_exp_subsys;
}
- ret = nf_conntrack_expect_register_notifier(&ctnl_notifier_exp);
+ ret = nf_ct_expect_register_notifier(&ctnl_notifier_exp);
if (ret < 0) {
printk("ctnetlink_init: cannot expect register notifier.\n");
goto err_unreg_notifier;
printk("ctnetlink: unregistering from nfnetlink.\n");
#ifdef CONFIG_NF_CONNTRACK_EVENTS
- nf_conntrack_expect_unregister_notifier(&ctnl_notifier_exp);
+ nf_ct_expect_unregister_notifier(&ctnl_notifier_exp);
nf_conntrack_unregister_notifier(&ctnl_notifier);
#endif
struct nf_conntrack_expect *exp) __read_mostly;
EXPORT_SYMBOL_GPL(nf_nat_pptp_hook_expectfn);
-#if 0
+#ifdef DEBUG
/* PptpControlMessageType names */
const char *pptp_msg_name[] = {
"UNKNOWN_MESSAGE",
"SET_LINK_INFO"
};
EXPORT_SYMBOL(pptp_msg_name);
-#define DEBUGP(format, args...) printk(KERN_DEBUG "%s:%s: " format, __FILE__, __FUNCTION__, ## args)
-#else
-#define DEBUGP(format, args...)
#endif
#define SECS *HZ
struct nf_conntrack_expect *exp)
{
typeof(nf_nat_pptp_hook_expectfn) nf_nat_pptp_expectfn;
- DEBUGP("increasing timeouts\n");
+ pr_debug("increasing timeouts\n");
/* increase timeout of GRE data channel conntrack entry */
ct->proto.gre.timeout = PPTP_GRE_TIMEOUT;
/* obviously this tuple inversion only works until you do NAT */
nf_ct_invert_tuplepr(&inv_t, &exp->tuple);
- DEBUGP("trying to unexpect other dir: ");
+ pr_debug("trying to unexpect other dir: ");
NF_CT_DUMP_TUPLE(&inv_t);
- exp_other = nf_conntrack_expect_find_get(&inv_t);
+ exp_other = nf_ct_expect_find_get(&inv_t);
if (exp_other) {
/* delete other expectation. */
- DEBUGP("found\n");
- nf_conntrack_unexpect_related(exp_other);
- nf_conntrack_expect_put(exp_other);
+ pr_debug("found\n");
+ nf_ct_unexpect_related(exp_other);
+ nf_ct_expect_put(exp_other);
} else {
- DEBUGP("not found\n");
+ pr_debug("not found\n");
}
}
rcu_read_unlock();
struct nf_conntrack_expect *exp;
struct nf_conn *sibling;
- DEBUGP("trying to timeout ct or exp for tuple ");
+ pr_debug("trying to timeout ct or exp for tuple ");
NF_CT_DUMP_TUPLE(t);
- h = nf_conntrack_find_get(t, NULL);
+ h = nf_conntrack_find_get(t);
if (h) {
sibling = nf_ct_tuplehash_to_ctrack(h);
- DEBUGP("setting timeout of conntrack %p to 0\n", sibling);
+ pr_debug("setting timeout of conntrack %p to 0\n", sibling);
sibling->proto.gre.timeout = 0;
sibling->proto.gre.stream_timeout = 0;
if (del_timer(&sibling->timeout))
nf_ct_put(sibling);
return 1;
} else {
- exp = nf_conntrack_expect_find_get(t);
+ exp = nf_ct_expect_find_get(t);
if (exp) {
- DEBUGP("unexpect_related of expect %p\n", exp);
- nf_conntrack_unexpect_related(exp);
- nf_conntrack_expect_put(exp);
+ pr_debug("unexpect_related of expect %p\n", exp);
+ nf_ct_unexpect_related(exp);
+ nf_ct_expect_put(exp);
return 1;
}
}
t.src.u.gre.key = help->help.ct_pptp_info.pns_call_id;
t.dst.u.gre.key = help->help.ct_pptp_info.pac_call_id;
if (!destroy_sibling_or_exp(&t))
- DEBUGP("failed to timeout original pns->pac ct/exp\n");
+ pr_debug("failed to timeout original pns->pac ct/exp\n");
/* try reply (pac->pns) tuple */
memcpy(&t, &ct->tuplehash[IP_CT_DIR_REPLY].tuple, sizeof(t));
t.src.u.gre.key = help->help.ct_pptp_info.pac_call_id;
t.dst.u.gre.key = help->help.ct_pptp_info.pns_call_id;
if (!destroy_sibling_or_exp(&t))
- DEBUGP("failed to timeout reply pac->pns ct/exp\n");
+ pr_debug("failed to timeout reply pac->pns ct/exp\n");
}
/* expect GRE connections (PNS->PAC and PAC->PNS direction) */
int ret = 1;
typeof(nf_nat_pptp_hook_exp_gre) nf_nat_pptp_exp_gre;
- exp_orig = nf_conntrack_expect_alloc(ct);
+ exp_orig = nf_ct_expect_alloc(ct);
if (exp_orig == NULL)
goto out;
- exp_reply = nf_conntrack_expect_alloc(ct);
+ exp_reply = nf_ct_expect_alloc(ct);
if (exp_reply == NULL)
goto out_put_orig;
/* original direction, PNS->PAC */
dir = IP_CT_DIR_ORIGINAL;
- nf_conntrack_expect_init(exp_orig, ct->tuplehash[dir].tuple.src.l3num,
- &ct->tuplehash[dir].tuple.src.u3,
- &ct->tuplehash[dir].tuple.dst.u3,
- IPPROTO_GRE, &peer_callid, &callid);
+ nf_ct_expect_init(exp_orig, ct->tuplehash[dir].tuple.src.l3num,
+ &ct->tuplehash[dir].tuple.src.u3,
+ &ct->tuplehash[dir].tuple.dst.u3,
+ IPPROTO_GRE, &peer_callid, &callid);
exp_orig->expectfn = pptp_expectfn;
/* reply direction, PAC->PNS */
dir = IP_CT_DIR_REPLY;
- nf_conntrack_expect_init(exp_reply, ct->tuplehash[dir].tuple.src.l3num,
- &ct->tuplehash[dir].tuple.src.u3,
- &ct->tuplehash[dir].tuple.dst.u3,
- IPPROTO_GRE, &callid, &peer_callid);
+ nf_ct_expect_init(exp_reply, ct->tuplehash[dir].tuple.src.l3num,
+ &ct->tuplehash[dir].tuple.src.u3,
+ &ct->tuplehash[dir].tuple.dst.u3,
+ IPPROTO_GRE, &callid, &peer_callid);
exp_reply->expectfn = pptp_expectfn;
nf_nat_pptp_exp_gre = rcu_dereference(nf_nat_pptp_hook_exp_gre);
if (nf_nat_pptp_exp_gre && ct->status & IPS_NAT_MASK)
nf_nat_pptp_exp_gre(exp_orig, exp_reply);
- if (nf_conntrack_expect_related(exp_orig) != 0)
+ if (nf_ct_expect_related(exp_orig) != 0)
goto out_put_both;
- if (nf_conntrack_expect_related(exp_reply) != 0)
+ if (nf_ct_expect_related(exp_reply) != 0)
goto out_unexpect_orig;
/* Add GRE keymap entries */
ret = 0;
out_put_both:
- nf_conntrack_expect_put(exp_reply);
+ nf_ct_expect_put(exp_reply);
out_put_orig:
- nf_conntrack_expect_put(exp_orig);
+ nf_ct_expect_put(exp_orig);
out:
return ret;
out_unexpect_both:
- nf_conntrack_unexpect_related(exp_reply);
+ nf_ct_unexpect_related(exp_reply);
out_unexpect_orig:
- nf_conntrack_unexpect_related(exp_orig);
+ nf_ct_unexpect_related(exp_orig);
goto out_put_both;
}
typeof(nf_nat_pptp_hook_inbound) nf_nat_pptp_inbound;
msg = ntohs(ctlh->messageType);
- DEBUGP("inbound control message %s\n", pptp_msg_name[msg]);
+ pr_debug("inbound control message %s\n", pptp_msg_name[msg]);
switch (msg) {
case PPTP_START_SESSION_REPLY:
pcid = pptpReq->ocack.peersCallID;
if (info->pns_call_id != pcid)
goto invalid;
- DEBUGP("%s, CID=%X, PCID=%X\n", pptp_msg_name[msg],
- ntohs(cid), ntohs(pcid));
+ pr_debug("%s, CID=%X, PCID=%X\n", pptp_msg_name[msg],
+ ntohs(cid), ntohs(pcid));
if (pptpReq->ocack.resultCode == PPTP_OUTCALL_CONNECT) {
info->cstate = PPTP_CALL_OUT_CONF;
goto invalid;
cid = pptpReq->icreq.callID;
- DEBUGP("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid));
+ pr_debug("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid));
info->cstate = PPTP_CALL_IN_REQ;
info->pac_call_id = cid;
break;
if (info->pns_call_id != pcid)
goto invalid;
- DEBUGP("%s, PCID=%X\n", pptp_msg_name[msg], ntohs(pcid));
+ pr_debug("%s, PCID=%X\n", pptp_msg_name[msg], ntohs(pcid));
info->cstate = PPTP_CALL_IN_CONF;
/* we expect a GRE connection from PAC to PNS */
case PPTP_CALL_DISCONNECT_NOTIFY:
/* server confirms disconnect */
cid = pptpReq->disc.callID;
- DEBUGP("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid));
+ pr_debug("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid));
info->cstate = PPTP_CALL_NONE;
/* untrack this call id, unexpect GRE packets */
return NF_ACCEPT;
invalid:
- DEBUGP("invalid %s: type=%d cid=%u pcid=%u "
- "cstate=%d sstate=%d pns_cid=%u pac_cid=%u\n",
- msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : pptp_msg_name[0],
- msg, ntohs(cid), ntohs(pcid), info->cstate, info->sstate,
- ntohs(info->pns_call_id), ntohs(info->pac_call_id));
+ pr_debug("invalid %s: type=%d cid=%u pcid=%u "
+ "cstate=%d sstate=%d pns_cid=%u pac_cid=%u\n",
+ msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : pptp_msg_name[0],
+ msg, ntohs(cid), ntohs(pcid), info->cstate, info->sstate,
+ ntohs(info->pns_call_id), ntohs(info->pac_call_id));
return NF_ACCEPT;
}
typeof(nf_nat_pptp_hook_outbound) nf_nat_pptp_outbound;
msg = ntohs(ctlh->messageType);
- DEBUGP("outbound control message %s\n", pptp_msg_name[msg]);
+ pr_debug("outbound control message %s\n", pptp_msg_name[msg]);
switch (msg) {
case PPTP_START_SESSION_REQUEST:
info->cstate = PPTP_CALL_OUT_REQ;
/* track PNS call id */
cid = pptpReq->ocreq.callID;
- DEBUGP("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid));
+ pr_debug("%s, CID=%X\n", pptp_msg_name[msg], ntohs(cid));
info->pns_call_id = cid;
break;
pcid = pptpReq->icack.peersCallID;
if (info->pac_call_id != pcid)
goto invalid;
- DEBUGP("%s, CID=%X PCID=%X\n", pptp_msg_name[msg],
- ntohs(cid), ntohs(pcid));
+ pr_debug("%s, CID=%X PCID=%X\n", pptp_msg_name[msg],
+ ntohs(cid), ntohs(pcid));
if (pptpReq->icack.resultCode == PPTP_INCALL_ACCEPT) {
/* part two of the three-way handshake */
return NF_ACCEPT;
invalid:
- DEBUGP("invalid %s: type=%d cid=%u pcid=%u "
- "cstate=%d sstate=%d pns_cid=%u pac_cid=%u\n",
- msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : pptp_msg_name[0],
- msg, ntohs(cid), ntohs(pcid), info->cstate, info->sstate,
- ntohs(info->pns_call_id), ntohs(info->pac_call_id));
+ pr_debug("invalid %s: type=%d cid=%u pcid=%u "
+ "cstate=%d sstate=%d pns_cid=%u pac_cid=%u\n",
+ msg <= PPTP_MSG_MAX ? pptp_msg_name[msg] : pptp_msg_name[0],
+ msg, ntohs(cid), ntohs(pcid), info->cstate, info->sstate,
+ ntohs(info->pns_call_id), ntohs(info->pac_call_id));
return NF_ACCEPT;
}
pptph = skb_header_pointer(*pskb, nexthdr_off, sizeof(_pptph), &_pptph);
if (!pptph) {
- DEBUGP("no full PPTP header, can't track\n");
+ pr_debug("no full PPTP header, can't track\n");
return NF_ACCEPT;
}
nexthdr_off += sizeof(_pptph);
/* if it's not a control message we can't do anything with it */
if (ntohs(pptph->packetType) != PPTP_PACKET_CONTROL ||
ntohl(pptph->magicCookie) != PPTP_MAGIC_COOKIE) {
- DEBUGP("not a control packet\n");
+ pr_debug("not a control packet\n");
return NF_ACCEPT;
}
/* server -> client (PAC -> PNS) */
ret = pptp_inbound_pkt(pskb, ctlh, pptpReq, reqlen, ct,
ctinfo);
- DEBUGP("sstate: %d->%d, cstate: %d->%d\n",
- oldsstate, info->sstate, oldcstate, info->cstate);
+ pr_debug("sstate: %d->%d, cstate: %d->%d\n",
+ oldsstate, info->sstate, oldcstate, info->cstate);
spin_unlock_bh(&nf_pptp_lock);
return ret;
.tuple.src.l3num = AF_INET,
.tuple.src.u.tcp.port = __constant_htons(PPTP_CONTROL_PORT),
.tuple.dst.protonum = IPPROTO_TCP,
- .mask.src.l3num = 0xffff,
- .mask.src.u.tcp.port = __constant_htons(0xffff),
- .mask.dst.protonum = 0xff,
.help = conntrack_pptp_help,
.destroy = pptp_destroy_siblings,
};
#define GRE_TIMEOUT (30 * HZ)
#define GRE_STREAM_TIMEOUT (180 * HZ)
-#if 0
-#define DEBUGP(format, args...) printk(KERN_DEBUG "%s:%s: " format, __FILE__, __FUNCTION__, ## args)
-#else
-#define DEBUGP(x, args...)
-#endif
-
static DEFINE_RWLOCK(nf_ct_gre_lock);
static LIST_HEAD(gre_keymap_list);
}
read_unlock_bh(&nf_ct_gre_lock);
- DEBUGP("lookup src key 0x%x for ", key);
+ pr_debug("lookup src key 0x%x for ", key);
NF_CT_DUMP_TUPLE(t);
return key;
if (gre_key_cmpfn(km, t) && km == *kmp)
return 0;
}
- DEBUGP("trying to override keymap_%s for ct %p\n",
- dir == IP_CT_DIR_REPLY ? "reply" : "orig", ct);
+ pr_debug("trying to override keymap_%s for ct %p\n",
+ dir == IP_CT_DIR_REPLY ? "reply" : "orig", ct);
return -EEXIST;
}
memcpy(&km->tuple, t, sizeof(*t));
*kmp = km;
- DEBUGP("adding new entry %p: ", km);
+ pr_debug("adding new entry %p: ", km);
NF_CT_DUMP_TUPLE(&km->tuple);
write_lock_bh(&nf_ct_gre_lock);
struct nf_conn_help *help = nfct_help(ct);
enum ip_conntrack_dir dir;
- DEBUGP("entering for ct %p\n", ct);
+ pr_debug("entering for ct %p\n", ct);
write_lock_bh(&nf_ct_gre_lock);
for (dir = IP_CT_DIR_ORIGINAL; dir < IP_CT_DIR_MAX; dir++) {
if (help->help.ct_pptp_info.keymap[dir]) {
- DEBUGP("removing %p from list\n",
- help->help.ct_pptp_info.keymap[dir]);
+ pr_debug("removing %p from list\n",
+ help->help.ct_pptp_info.keymap[dir]);
list_del(&help->help.ct_pptp_info.keymap[dir]->list);
kfree(help->help.ct_pptp_info.keymap[dir]);
help->help.ct_pptp_info.keymap[dir] = NULL;
return 1;
if (ntohs(grehdr->protocol) != GRE_PROTOCOL_PPTP) {
- DEBUGP("GRE_VERSION_PPTP but unknown proto\n");
+ pr_debug("GRE_VERSION_PPTP but unknown proto\n");
return 0;
}
static int gre_new(struct nf_conn *ct, const struct sk_buff *skb,
unsigned int dataoff)
{
- DEBUGP(": ");
+ pr_debug(": ");
NF_CT_DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
/* initialize to sane value. Ideally a conntrack helper
static void gre_destroy(struct nf_conn *ct)
{
struct nf_conn *master = ct->master;
- DEBUGP(" entering\n");
+ pr_debug(" entering\n");
if (!master)
- DEBUGP("no master !?!\n");
+ pr_debug("no master !?!\n");
else
nf_ct_gre_keymap_destroy(master);
}
#include <net/netfilter/nf_conntrack_l4proto.h>
#include <net/netfilter/nf_conntrack_ecache.h>
-#if 0
-#define DEBUGP(format, ...) printk(format, ## __VA_ARGS__)
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Protects conntrack->proto.sctp */
static DEFINE_RWLOCK(sctp_lock);
{
sctp_sctphdr_t _hdr, *hp;
- DEBUGP(__FUNCTION__);
- DEBUGP("\n");
-
/* Actually only need first 8 bytes. */
hp = skb_header_pointer(skb, dataoff, 8, &_hdr);
if (hp == NULL)
static int sctp_invert_tuple(struct nf_conntrack_tuple *tuple,
const struct nf_conntrack_tuple *orig)
{
- DEBUGP(__FUNCTION__);
- DEBUGP("\n");
-
tuple->src.u.sctp.port = orig->dst.u.sctp.port;
tuple->dst.u.sctp.port = orig->src.u.sctp.port;
return 1;
static int sctp_print_tuple(struct seq_file *s,
const struct nf_conntrack_tuple *tuple)
{
- DEBUGP(__FUNCTION__);
- DEBUGP("\n");
-
return seq_printf(s, "sport=%hu dport=%hu ",
ntohs(tuple->src.u.sctp.port),
ntohs(tuple->dst.u.sctp.port));
{
enum sctp_conntrack state;
- DEBUGP(__FUNCTION__);
- DEBUGP("\n");
-
read_lock_bh(&sctp_lock);
state = conntrack->proto.sctp.state;
read_unlock_bh(&sctp_lock);
sctp_chunkhdr_t _sch, *sch;
int flag;
- DEBUGP(__FUNCTION__);
- DEBUGP("\n");
-
flag = 0;
for_each_sctp_chunk (skb, sch, _sch, offset, dataoff, count) {
- DEBUGP("Chunk Num: %d Type: %d\n", count, sch->type);
+ pr_debug("Chunk Num: %d Type: %d\n", count, sch->type);
if (sch->type == SCTP_CID_INIT
|| sch->type == SCTP_CID_INIT_ACK
|| sch->type == SCTP_CID_COOKIE_ECHO
|| flag)
&& count !=0) || !sch->length) {
- DEBUGP("Basic checks failed\n");
+ pr_debug("Basic checks failed\n");
return 1;
}
}
}
- DEBUGP("Basic checks passed\n");
+ pr_debug("Basic checks passed\n");
return count == 0;
}
{
int i;
- DEBUGP(__FUNCTION__);
- DEBUGP("\n");
-
- DEBUGP("Chunk type: %d\n", chunk_type);
+ pr_debug("Chunk type: %d\n", chunk_type);
switch (chunk_type) {
case SCTP_CID_INIT:
- DEBUGP("SCTP_CID_INIT\n");
+ pr_debug("SCTP_CID_INIT\n");
i = 0; break;
case SCTP_CID_INIT_ACK:
- DEBUGP("SCTP_CID_INIT_ACK\n");
+ pr_debug("SCTP_CID_INIT_ACK\n");
i = 1; break;
case SCTP_CID_ABORT:
- DEBUGP("SCTP_CID_ABORT\n");
+ pr_debug("SCTP_CID_ABORT\n");
i = 2; break;
case SCTP_CID_SHUTDOWN:
- DEBUGP("SCTP_CID_SHUTDOWN\n");
+ pr_debug("SCTP_CID_SHUTDOWN\n");
i = 3; break;
case SCTP_CID_SHUTDOWN_ACK:
- DEBUGP("SCTP_CID_SHUTDOWN_ACK\n");
+ pr_debug("SCTP_CID_SHUTDOWN_ACK\n");
i = 4; break;
case SCTP_CID_ERROR:
- DEBUGP("SCTP_CID_ERROR\n");
+ pr_debug("SCTP_CID_ERROR\n");
i = 5; break;
case SCTP_CID_COOKIE_ECHO:
- DEBUGP("SCTP_CID_COOKIE_ECHO\n");
+ pr_debug("SCTP_CID_COOKIE_ECHO\n");
i = 6; break;
case SCTP_CID_COOKIE_ACK:
- DEBUGP("SCTP_CID_COOKIE_ACK\n");
+ pr_debug("SCTP_CID_COOKIE_ACK\n");
i = 7; break;
case SCTP_CID_SHUTDOWN_COMPLETE:
- DEBUGP("SCTP_CID_SHUTDOWN_COMPLETE\n");
+ pr_debug("SCTP_CID_SHUTDOWN_COMPLETE\n");
i = 8; break;
default:
/* Other chunks like DATA, SACK, HEARTBEAT and
its ACK do not cause a change in state */
- DEBUGP("Unknown chunk type, Will stay in %s\n",
- sctp_conntrack_names[cur_state]);
+ pr_debug("Unknown chunk type, Will stay in %s\n",
+ sctp_conntrack_names[cur_state]);
return cur_state;
}
- DEBUGP("dir: %d cur_state: %s chunk_type: %d new_state: %s\n",
- dir, sctp_conntrack_names[cur_state], chunk_type,
- sctp_conntrack_names[sctp_conntracks[dir][i][cur_state]]);
+ pr_debug("dir: %d cur_state: %s chunk_type: %d new_state: %s\n",
+ dir, sctp_conntrack_names[cur_state], chunk_type,
+ sctp_conntrack_names[sctp_conntracks[dir][i][cur_state]]);
return sctp_conntracks[dir][i][cur_state];
}
u_int32_t offset, count;
char map[256 / sizeof (char)] = {0};
- DEBUGP(__FUNCTION__);
- DEBUGP("\n");
-
sh = skb_header_pointer(skb, dataoff, sizeof(_sctph), &_sctph);
if (sh == NULL)
return -1;
&& !test_bit(SCTP_CID_ABORT, (void *)map)
&& !test_bit(SCTP_CID_SHUTDOWN_ACK, (void *)map)
&& (sh->vtag != conntrack->proto.sctp.vtag[CTINFO2DIR(ctinfo)])) {
- DEBUGP("Verification tag check failed\n");
+ pr_debug("Verification tag check failed\n");
return -1;
}
/* Invalid */
if (newconntrack == SCTP_CONNTRACK_MAX) {
- DEBUGP("nf_conntrack_sctp: Invalid dir=%i ctype=%u conntrack=%u\n",
- CTINFO2DIR(ctinfo), sch->type, oldsctpstate);
+ pr_debug("nf_conntrack_sctp: Invalid dir=%i ctype=%u "
+ "conntrack=%u\n",
+ CTINFO2DIR(ctinfo), sch->type, oldsctpstate);
write_unlock_bh(&sctp_lock);
return -1;
}
write_unlock_bh(&sctp_lock);
return -1;
}
- DEBUGP("Setting vtag %x for dir %d\n",
- ih->init_tag, !CTINFO2DIR(ctinfo));
+ pr_debug("Setting vtag %x for dir %d\n",
+ ih->init_tag, !CTINFO2DIR(ctinfo));
conntrack->proto.sctp.vtag[!CTINFO2DIR(ctinfo)] = ih->init_tag;
}
if (oldsctpstate == SCTP_CONNTRACK_COOKIE_ECHOED
&& CTINFO2DIR(ctinfo) == IP_CT_DIR_REPLY
&& newconntrack == SCTP_CONNTRACK_ESTABLISHED) {
- DEBUGP("Setting assured bit\n");
+ pr_debug("Setting assured bit\n");
set_bit(IPS_ASSURED_BIT, &conntrack->status);
nf_conntrack_event_cache(IPCT_STATUS, skb);
}
u_int32_t offset, count;
char map[256 / sizeof (char)] = {0};
- DEBUGP(__FUNCTION__);
- DEBUGP("\n");
-
sh = skb_header_pointer(skb, dataoff, sizeof(_sctph), &_sctph);
if (sh == NULL)
return 0;
SCTP_CONNTRACK_NONE, sch->type);
/* Invalid: delete conntrack */
- if (newconntrack == SCTP_CONNTRACK_MAX) {
- DEBUGP("nf_conntrack_sctp: invalid new deleting.\n");
+ if (newconntrack == SCTP_CONNTRACK_NONE ||
+ newconntrack == SCTP_CONNTRACK_MAX) {
+ pr_debug("nf_conntrack_sctp: invalid new deleting.\n");
return 0;
}
if (ih == NULL)
return 0;
- DEBUGP("Setting vtag %x for new conn\n",
- ih->init_tag);
+ pr_debug("Setting vtag %x for new conn\n",
+ ih->init_tag);
conntrack->proto.sctp.vtag[IP_CT_DIR_REPLY] =
ih->init_tag;
/* If it is a shutdown ack OOTB packet, we expect a return
shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8) */
else {
- DEBUGP("Setting vtag %x for new conn OOTB\n",
- sh->vtag);
+ pr_debug("Setting vtag %x for new conn OOTB\n",
+ sh->vtag);
conntrack->proto.sctp.vtag[IP_CT_DIR_REPLY] = sh->vtag;
}
cleanup_sctp4:
nf_conntrack_l4proto_unregister(&nf_conntrack_l4proto_sctp4);
out:
- DEBUGP("SCTP conntrack module loading %s\n",
- ret ? "failed": "succeeded");
return ret;
}
{
nf_conntrack_l4proto_unregister(&nf_conntrack_l4proto_sctp6);
nf_conntrack_l4proto_unregister(&nf_conntrack_l4proto_sctp4);
- DEBUGP("SCTP conntrack module unloaded\n");
}
module_init(nf_conntrack_proto_sctp_init);
#include <net/netfilter/nf_conntrack_l4proto.h>
#include <net/netfilter/nf_conntrack_ecache.h>
-#if 0
-#define DEBUGP printk
-#define DEBUGP_VARS
-#else
-#define DEBUGP(format, args...)
-#endif
-
/* Protects conntrack->proto.tcp */
static DEFINE_RWLOCK(tcp_lock);
}
}
-static int tcp_in_window(struct ip_ct_tcp *state,
+static int tcp_in_window(struct nf_conn *ct,
+ struct ip_ct_tcp *state,
enum ip_conntrack_dir dir,
unsigned int index,
const struct sk_buff *skb,
{
struct ip_ct_tcp_state *sender = &state->seen[dir];
struct ip_ct_tcp_state *receiver = &state->seen[!dir];
+ struct nf_conntrack_tuple *tuple = &ct->tuplehash[dir].tuple;
__u32 seq, ack, sack, end, win, swin;
int res;
if (receiver->flags & IP_CT_TCP_FLAG_SACK_PERM)
tcp_sack(skb, dataoff, tcph, &sack);
- DEBUGP("tcp_in_window: START\n");
- DEBUGP("tcp_in_window: src=%u.%u.%u.%u:%hu dst=%u.%u.%u.%u:%hu "
- "seq=%u ack=%u sack=%u win=%u end=%u\n",
- NIPQUAD(iph->saddr), ntohs(tcph->source),
- NIPQUAD(iph->daddr), ntohs(tcph->dest),
- seq, ack, sack, win, end);
- DEBUGP("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i "
- "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
- sender->td_end, sender->td_maxend, sender->td_maxwin,
- sender->td_scale,
- receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
- receiver->td_scale);
+ pr_debug("tcp_in_window: START\n");
+ pr_debug("tcp_in_window: ");
+ NF_CT_DUMP_TUPLE(tuple);
+ pr_debug("seq=%u ack=%u sack=%u win=%u end=%u\n",
+ seq, ack, sack, win, end);
+ pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i "
+ "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
+ sender->td_end, sender->td_maxend, sender->td_maxwin,
+ sender->td_scale,
+ receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
+ receiver->td_scale);
if (sender->td_end == 0) {
/*
*/
seq = end = sender->td_end;
- DEBUGP("tcp_in_window: src=%u.%u.%u.%u:%hu dst=%u.%u.%u.%u:%hu "
- "seq=%u ack=%u sack =%u win=%u end=%u\n",
- NIPQUAD(iph->saddr), ntohs(tcph->source),
- NIPQUAD(iph->daddr), ntohs(tcph->dest),
- seq, ack, sack, win, end);
- DEBUGP("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i "
- "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
- sender->td_end, sender->td_maxend, sender->td_maxwin,
- sender->td_scale,
- receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
- receiver->td_scale);
-
- DEBUGP("tcp_in_window: I=%i II=%i III=%i IV=%i\n",
- before(seq, sender->td_maxend + 1),
- after(end, sender->td_end - receiver->td_maxwin - 1),
- before(sack, receiver->td_end + 1),
- after(ack, receiver->td_end - MAXACKWINDOW(sender)));
+ pr_debug("tcp_in_window: ");
+ NF_CT_DUMP_TUPLE(tuple);
+ pr_debug("seq=%u ack=%u sack =%u win=%u end=%u\n",
+ seq, ack, sack, win, end);
+ pr_debug("tcp_in_window: sender end=%u maxend=%u maxwin=%u scale=%i "
+ "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
+ sender->td_end, sender->td_maxend, sender->td_maxwin,
+ sender->td_scale,
+ receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
+ receiver->td_scale);
+
+ pr_debug("tcp_in_window: I=%i II=%i III=%i IV=%i\n",
+ before(seq, sender->td_maxend + 1),
+ after(end, sender->td_end - receiver->td_maxwin - 1),
+ before(sack, receiver->td_end + 1),
+ after(ack, receiver->td_end - MAXACKWINDOW(sender)));
if (before(seq, sender->td_maxend + 1) &&
after(end, sender->td_end - receiver->td_maxwin - 1) &&
: "SEQ is over the upper bound (over the window of the receiver)");
}
- DEBUGP("tcp_in_window: res=%i sender end=%u maxend=%u maxwin=%u "
- "receiver end=%u maxend=%u maxwin=%u\n",
- res, sender->td_end, sender->td_maxend, sender->td_maxwin,
- receiver->td_end, receiver->td_maxend, receiver->td_maxwin);
+ pr_debug("tcp_in_window: res=%i sender end=%u maxend=%u maxwin=%u "
+ "receiver end=%u maxend=%u maxwin=%u\n",
+ res, sender->td_end, sender->td_maxend, sender->td_maxwin,
+ receiver->td_end, receiver->td_maxend, receiver->td_maxwin);
return res;
}
int dir)
{
struct tcphdr *tcph = (void *)skb->data + dataoff;
- __u32 end;
-#ifdef DEBUGP_VARS
struct ip_ct_tcp_state *sender = &conntrack->proto.tcp.seen[dir];
struct ip_ct_tcp_state *receiver = &conntrack->proto.tcp.seen[!dir];
-#endif
+ __u32 end;
end = segment_seq_plus_len(ntohl(tcph->seq), skb->len, dataoff, tcph);
conntrack->proto.tcp.seen[dir].td_end = end;
conntrack->proto.tcp.last_end = end;
write_unlock_bh(&tcp_lock);
- DEBUGP("tcp_update: sender end=%u maxend=%u maxwin=%u scale=%i "
- "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
- sender->td_end, sender->td_maxend, sender->td_maxwin,
- sender->td_scale,
- receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
- receiver->td_scale);
+ pr_debug("tcp_update: sender end=%u maxend=%u maxwin=%u scale=%i "
+ "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
+ sender->td_end, sender->td_maxend, sender->td_maxwin,
+ sender->td_scale,
+ receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
+ receiver->td_scale);
}
EXPORT_SYMBOL_GPL(nf_conntrack_tcp_update);
#endif
int pf,
unsigned int hooknum)
{
+ struct nf_conntrack_tuple *tuple;
enum tcp_conntrack new_state, old_state;
enum ip_conntrack_dir dir;
struct tcphdr *th, _tcph;
dir = CTINFO2DIR(ctinfo);
index = get_conntrack_index(th);
new_state = tcp_conntracks[dir][index][old_state];
+ tuple = &conntrack->tuplehash[dir].tuple;
switch (new_state) {
case TCP_CONNTRACK_IGNORE:
return NF_ACCEPT;
case TCP_CONNTRACK_MAX:
/* Invalid packet */
- DEBUGP("nf_ct_tcp: Invalid dir=%i index=%u ostate=%u\n",
- dir, get_conntrack_index(th),
- old_state);
+ pr_debug("nf_ct_tcp: Invalid dir=%i index=%u ostate=%u\n",
+ dir, get_conntrack_index(th), old_state);
write_unlock_bh(&tcp_lock);
if (LOG_INVALID(IPPROTO_TCP))
nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
break;
}
- if (!tcp_in_window(&conntrack->proto.tcp, dir, index,
+ if (!tcp_in_window(conntrack, &conntrack->proto.tcp, dir, index,
skb, dataoff, th, pf)) {
write_unlock_bh(&tcp_lock);
return -NF_ACCEPT;
/* From now on we have got in-window packets */
conntrack->proto.tcp.last_index = index;
- DEBUGP("tcp_conntracks: src=%u.%u.%u.%u:%hu dst=%u.%u.%u.%u:%hu "
- "syn=%i ack=%i fin=%i rst=%i old=%i new=%i\n",
- NIPQUAD(iph->saddr), ntohs(th->source),
- NIPQUAD(iph->daddr), ntohs(th->dest),
- (th->syn ? 1 : 0), (th->ack ? 1 : 0),
- (th->fin ? 1 : 0), (th->rst ? 1 : 0),
- old_state, new_state);
+ pr_debug("tcp_conntracks: ");
+ NF_CT_DUMP_TUPLE(tuple);
+ pr_debug("syn=%i ack=%i fin=%i rst=%i old=%i new=%i\n",
+ (th->syn ? 1 : 0), (th->ack ? 1 : 0),
+ (th->fin ? 1 : 0), (th->rst ? 1 : 0),
+ old_state, new_state);
conntrack->proto.tcp.state = new_state;
if (old_state != new_state
{
enum tcp_conntrack new_state;
struct tcphdr *th, _tcph;
-#ifdef DEBUGP_VARS
struct ip_ct_tcp_state *sender = &conntrack->proto.tcp.seen[0];
struct ip_ct_tcp_state *receiver = &conntrack->proto.tcp.seen[1];
-#endif
th = skb_header_pointer(skb, dataoff, sizeof(_tcph), &_tcph);
BUG_ON(th == NULL);
/* Invalid: delete conntrack */
if (new_state >= TCP_CONNTRACK_MAX) {
- DEBUGP("nf_ct_tcp: invalid new deleting.\n");
+ pr_debug("nf_ct_tcp: invalid new deleting.\n");
return 0;
}
conntrack->proto.tcp.state = TCP_CONNTRACK_NONE;
conntrack->proto.tcp.last_index = TCP_NONE_SET;
- DEBUGP("tcp_new: sender end=%u maxend=%u maxwin=%u scale=%i "
- "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
- sender->td_end, sender->td_maxend, sender->td_maxwin,
- sender->td_scale,
- receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
- receiver->td_scale);
+ pr_debug("tcp_new: sender end=%u maxend=%u maxwin=%u scale=%i "
+ "receiver end=%u maxend=%u maxwin=%u scale=%i\n",
+ sender->td_end, sender->td_maxend, sender->td_maxwin,
+ sender->td_scale,
+ receiver->td_end, receiver->td_maxend, receiver->td_maxwin,
+ receiver->td_scale);
return 1;
}
static unsigned int ports_c;
module_param_array(ports, ushort, &ports_c, 0400);
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
struct sane_request {
__be32 RPC_code;
#define SANE_NET_START 7 /* RPC code */
ct_sane_info->state = SANE_STATE_NORMAL;
if (datalen < sizeof(struct sane_reply_net_start)) {
- DEBUGP("nf_ct_sane: NET_START reply too short\n");
+ pr_debug("nf_ct_sane: NET_START reply too short\n");
goto out;
}
reply = (struct sane_reply_net_start *)sb_ptr;
if (reply->status != htonl(SANE_STATUS_SUCCESS)) {
/* saned refused the command */
- DEBUGP("nf_ct_sane: unsuccessful SANE_STATUS = %u\n",
- ntohl(reply->status));
+ pr_debug("nf_ct_sane: unsuccessful SANE_STATUS = %u\n",
+ ntohl(reply->status));
goto out;
}
if (reply->zero != 0)
goto out;
- exp = nf_conntrack_expect_alloc(ct);
+ exp = nf_ct_expect_alloc(ct);
if (exp == NULL) {
ret = NF_DROP;
goto out;
}
tuple = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple;
- nf_conntrack_expect_init(exp, family,
- &tuple->src.u3, &tuple->dst.u3,
- IPPROTO_TCP,
- NULL, &reply->port);
+ nf_ct_expect_init(exp, family, &tuple->src.u3, &tuple->dst.u3,
+ IPPROTO_TCP, NULL, &reply->port);
- DEBUGP("nf_ct_sane: expect: ");
+ pr_debug("nf_ct_sane: expect: ");
NF_CT_DUMP_TUPLE(&exp->tuple);
- NF_CT_DUMP_TUPLE(&exp->mask);
/* Can't expect this? Best to drop packet now. */
- if (nf_conntrack_expect_related(exp) != 0)
+ if (nf_ct_expect_related(exp) != 0)
ret = NF_DROP;
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
out:
spin_unlock_bh(&nf_sane_lock);
return ret;
}
-static struct nf_conntrack_helper sane[MAX_PORTS][2];
-static char sane_names[MAX_PORTS][2][sizeof("sane-65535")];
+static struct nf_conntrack_helper sane[MAX_PORTS][2] __read_mostly;
+static char sane_names[MAX_PORTS][2][sizeof("sane-65535")] __read_mostly;
/* don't make this __exit, since it's called from __init ! */
static void nf_conntrack_sane_fini(void)
for (i = 0; i < ports_c; i++) {
for (j = 0; j < 2; j++) {
- DEBUGP("nf_ct_sane: unregistering helper for pf: %d "
- "port: %d\n",
- sane[i][j].tuple.src.l3num, ports[i]);
+ pr_debug("nf_ct_sane: unregistering helper for pf: %d "
+ "port: %d\n",
+ sane[i][j].tuple.src.l3num, ports[i]);
nf_conntrack_helper_unregister(&sane[i][j]);
}
}
for (j = 0; j < 2; j++) {
sane[i][j].tuple.src.u.tcp.port = htons(ports[i]);
sane[i][j].tuple.dst.protonum = IPPROTO_TCP;
- sane[i][j].mask.src.u.tcp.port = 0xFFFF;
- sane[i][j].mask.dst.protonum = 0xFF;
sane[i][j].max_expected = 1;
sane[i][j].timeout = 5 * 60; /* 5 Minutes */
sane[i][j].me = THIS_MODULE;
sprintf(tmpname, "sane-%d", ports[i]);
sane[i][j].name = tmpname;
- DEBUGP("nf_ct_sane: registering helper for pf: %d "
- "port: %d\n",
- sane[i][j].tuple.src.l3num, ports[i]);
+ pr_debug("nf_ct_sane: registering helper for pf: %d "
+ "port: %d\n",
+ sane[i][j].tuple.src.l3num, ports[i]);
ret = nf_conntrack_helper_register(&sane[i][j]);
if (ret) {
printk(KERN_ERR "nf_ct_sane: failed to "
#include <net/netfilter/nf_conntrack_helper.h>
#include <linux/netfilter/nf_conntrack_sip.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Christian Hentschel <chentschel@arnet.com.ar>");
MODULE_DESCRIPTION("SIP connection tracking helper");
const char *aux = dptr;
if (!parse_addr(ct, dptr, &dptr, &addr, limit)) {
- DEBUGP("ip: %s parse failed.!\n", dptr);
+ pr_debug("ip: %s parse failed.!\n", dptr);
return 0;
}
ct_sip_lnlen(dptr, limit),
hnfo->case_sensitive);
if (!aux) {
- DEBUGP("'%s' not found in '%s'.\n", hnfo->ln_str,
- hnfo->lname);
+ pr_debug("'%s' not found in '%s'.\n", hnfo->ln_str,
+ hnfo->lname);
return -1;
}
aux += hnfo->ln_strlen;
*matchoff = (aux - k) + shift;
- DEBUGP("%s match succeeded! - len: %u\n", hnfo->lname,
- *matchlen);
+ pr_debug("%s match succeeded! - len: %u\n", hnfo->lname,
+ *matchlen);
return 1;
}
- DEBUGP("%s header not found.\n", hnfo->lname);
+ pr_debug("%s header not found.\n", hnfo->lname);
return 0;
}
EXPORT_SYMBOL_GPL(ct_sip_get_info);
int ret;
typeof(nf_nat_sdp_hook) nf_nat_sdp;
- exp = nf_conntrack_expect_alloc(ct);
+ exp = nf_ct_expect_alloc(ct);
if (exp == NULL)
return NF_DROP;
- nf_conntrack_expect_init(exp, family,
- &ct->tuplehash[!dir].tuple.src.u3, addr,
- IPPROTO_UDP, NULL, &port);
+ nf_ct_expect_init(exp, family,
+ &ct->tuplehash[!dir].tuple.src.u3, addr,
+ IPPROTO_UDP, NULL, &port);
nf_nat_sdp = rcu_dereference(nf_nat_sdp_hook);
if (nf_nat_sdp && ct->status & IPS_NAT_MASK)
ret = nf_nat_sdp(pskb, ctinfo, exp, dptr);
else {
- if (nf_conntrack_expect_related(exp) != 0)
+ if (nf_ct_expect_related(exp) != 0)
ret = NF_DROP;
else
ret = NF_ACCEPT;
}
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
return ret;
}
if (!skb_is_nonlinear(*pskb))
dptr = (*pskb)->data + dataoff;
else {
- DEBUGP("Copy of skbuff not supported yet.\n");
+ pr_debug("Copy of skbuff not supported yet.\n");
goto out;
}
for (j = 0; j < 2; j++) {
sip[i][j].tuple.dst.protonum = IPPROTO_UDP;
sip[i][j].tuple.src.u.udp.port = htons(ports[i]);
- sip[i][j].mask.src.l3num = 0xFFFF;
- sip[i][j].mask.src.u.udp.port = htons(0xFFFF);
- sip[i][j].mask.dst.protonum = 0xFF;
sip[i][j].max_expected = 2;
sip[i][j].timeout = 3 * 60; /* 3 minutes */
sip[i][j].me = THIS_MODULE;
sprintf(tmpname, "sip-%u", i);
sip[i][j].name = tmpname;
- DEBUGP("port #%u: %u\n", i, ports[i]);
+ pr_debug("port #%u: %u\n", i, ports[i]);
ret = nf_conntrack_helper_register(&sip[i][j]);
if (ret) {
#include <net/netfilter/nf_conntrack_expect.h>
#include <net/netfilter/nf_conntrack_helper.h>
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
MODULE_LICENSE("GPL");
#ifdef CONFIG_PROC_FS
unsigned int bucket;
};
-static struct list_head *ct_get_first(struct seq_file *seq)
+static struct hlist_node *ct_get_first(struct seq_file *seq)
{
struct ct_iter_state *st = seq->private;
for (st->bucket = 0;
st->bucket < nf_conntrack_htable_size;
st->bucket++) {
- if (!list_empty(&nf_conntrack_hash[st->bucket]))
- return nf_conntrack_hash[st->bucket].next;
+ if (!hlist_empty(&nf_conntrack_hash[st->bucket]))
+ return nf_conntrack_hash[st->bucket].first;
}
return NULL;
}
-static struct list_head *ct_get_next(struct seq_file *seq, struct list_head *head)
+static struct hlist_node *ct_get_next(struct seq_file *seq,
+ struct hlist_node *head)
{
struct ct_iter_state *st = seq->private;
head = head->next;
- while (head == &nf_conntrack_hash[st->bucket]) {
+ while (head == NULL) {
if (++st->bucket >= nf_conntrack_htable_size)
return NULL;
- head = nf_conntrack_hash[st->bucket].next;
+ head = nf_conntrack_hash[st->bucket].first;
}
return head;
}
-static struct list_head *ct_get_idx(struct seq_file *seq, loff_t pos)
+static struct hlist_node *ct_get_idx(struct seq_file *seq, loff_t pos)
{
- struct list_head *head = ct_get_first(seq);
+ struct hlist_node *head = ct_get_first(seq);
if (head)
while (pos && (head = ct_get_next(seq, head)))
return 0;
}
-static struct seq_operations ct_seq_ops = {
+static const struct seq_operations ct_seq_ops = {
.start = ct_seq_start,
.next = ct_seq_next,
.stop = ct_seq_stop,
return 0;
}
-static struct seq_operations ct_cpu_seq_ops = {
+static const struct seq_operations ct_cpu_seq_ops = {
.start = ct_cpu_seq_start,
.next = ct_cpu_seq_next,
.stop = ct_cpu_seq_stop,
.extra1 = &log_invalid_proto_min,
.extra2 = &log_invalid_proto_max,
},
-
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "nf_conntrack_expect_max",
+ .data = &nf_ct_expect_max,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = &proc_dointvec,
+ },
{ .ctl_name = 0 }
};
static int __init nf_conntrack_standalone_init(void)
{
#ifdef CONFIG_PROC_FS
- struct proc_dir_entry *proc, *proc_exp, *proc_stat;
+ struct proc_dir_entry *proc, *proc_stat;
#endif
int ret = 0;
proc = proc_net_fops_create("nf_conntrack", 0440, &ct_file_ops);
if (!proc) goto cleanup_init;
- proc_exp = proc_net_fops_create("nf_conntrack_expect", 0440,
- &exp_file_ops);
- if (!proc_exp) goto cleanup_proc;
-
proc_stat = create_proc_entry("nf_conntrack", S_IRUGO, proc_net_stat);
if (!proc_stat)
- goto cleanup_proc_exp;
+ goto cleanup_proc;
proc_stat->proc_fops = &ct_cpu_seq_fops;
proc_stat->owner = THIS_MODULE;
#endif
#ifdef CONFIG_PROC_FS
remove_proc_entry("nf_conntrack", proc_net_stat);
- cleanup_proc_exp:
- proc_net_remove("nf_conntrack_expect");
cleanup_proc:
proc_net_remove("nf_conntrack");
cleanup_init:
#endif
#ifdef CONFIG_PROC_FS
remove_proc_entry("nf_conntrack", proc_net_stat);
- proc_net_remove("nf_conntrack_expect");
proc_net_remove("nf_conntrack");
#endif /* CNFIG_PROC_FS */
nf_conntrack_cleanup();
module_param_array(ports, ushort, &ports_c, 0400);
MODULE_PARM_DESC(ports, "Port numbers of TFTP servers");
-#if 0
-#define DEBUGP(format, args...) printk("%s:%s:" format, \
- __FILE__, __FUNCTION__ , ## args)
-#else
-#define DEBUGP(format, args...)
-#endif
-
unsigned int (*nf_nat_tftp_hook)(struct sk_buff **pskb,
enum ip_conntrack_info ctinfo,
struct nf_conntrack_expect *exp) __read_mostly;
case TFTP_OPCODE_READ:
case TFTP_OPCODE_WRITE:
/* RRQ and WRQ works the same way */
- DEBUGP("");
NF_CT_DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple);
NF_CT_DUMP_TUPLE(&ct->tuplehash[IP_CT_DIR_REPLY].tuple);
- exp = nf_conntrack_expect_alloc(ct);
+ exp = nf_ct_expect_alloc(ct);
if (exp == NULL)
return NF_DROP;
tuple = &ct->tuplehash[IP_CT_DIR_REPLY].tuple;
- nf_conntrack_expect_init(exp, family,
- &tuple->src.u3, &tuple->dst.u3,
- IPPROTO_UDP,
- NULL, &tuple->dst.u.udp.port);
+ nf_ct_expect_init(exp, family, &tuple->src.u3, &tuple->dst.u3,
+ IPPROTO_UDP, NULL, &tuple->dst.u.udp.port);
- DEBUGP("expect: ");
+ pr_debug("expect: ");
NF_CT_DUMP_TUPLE(&exp->tuple);
- NF_CT_DUMP_TUPLE(&exp->mask);
nf_nat_tftp = rcu_dereference(nf_nat_tftp_hook);
if (nf_nat_tftp && ct->status & IPS_NAT_MASK)
ret = nf_nat_tftp(pskb, ctinfo, exp);
- else if (nf_conntrack_expect_related(exp) != 0)
+ else if (nf_ct_expect_related(exp) != 0)
ret = NF_DROP;
- nf_conntrack_expect_put(exp);
+ nf_ct_expect_put(exp);
break;
case TFTP_OPCODE_DATA:
case TFTP_OPCODE_ACK:
- DEBUGP("Data/ACK opcode\n");
+ pr_debug("Data/ACK opcode\n");
break;
case TFTP_OPCODE_ERROR:
- DEBUGP("Error opcode\n");
+ pr_debug("Error opcode\n");
break;
default:
- DEBUGP("Unknown opcode\n");
+ pr_debug("Unknown opcode\n");
}
return ret;
}
for (j = 0; j < 2; j++) {
tftp[i][j].tuple.dst.protonum = IPPROTO_UDP;
tftp[i][j].tuple.src.u.udp.port = htons(ports[i]);
- tftp[i][j].mask.src.l3num = 0xFFFF;
- tftp[i][j].mask.dst.protonum = 0xFF;
- tftp[i][j].mask.src.u.udp.port = htons(0xFFFF);
tftp[i][j].max_expected = 1;
tftp[i][j].timeout = 5 * 60; /* 5 minutes */
tftp[i][j].me = THIS_MODULE;
return seq_printf(s, "%2lld %s\n", *pos, logger->name);
}
-static struct seq_operations nflog_seq_ops = {
+static const struct seq_operations nflog_seq_ops = {
.start = seq_start,
.next = seq_next,
.stop = seq_stop,
*/
static struct nf_queue_handler *queue_handler[NPROTO];
-static DEFINE_RWLOCK(queue_handler_lock);
+static DEFINE_MUTEX(queue_handler_mutex);
/* return EBUSY when somebody else is registered, return EEXIST if the
* same handler is registered, return 0 in case of success. */
if (pf >= NPROTO)
return -EINVAL;
- write_lock_bh(&queue_handler_lock);
+ mutex_lock(&queue_handler_mutex);
if (queue_handler[pf] == qh)
ret = -EEXIST;
else if (queue_handler[pf])
ret = -EBUSY;
else {
- queue_handler[pf] = qh;
+ rcu_assign_pointer(queue_handler[pf], qh);
ret = 0;
}
- write_unlock_bh(&queue_handler_lock);
+ mutex_unlock(&queue_handler_mutex);
return ret;
}
EXPORT_SYMBOL(nf_register_queue_handler);
/* The caller must flush their queue before this */
-int nf_unregister_queue_handler(int pf)
+int nf_unregister_queue_handler(int pf, struct nf_queue_handler *qh)
{
if (pf >= NPROTO)
return -EINVAL;
- write_lock_bh(&queue_handler_lock);
- queue_handler[pf] = NULL;
- write_unlock_bh(&queue_handler_lock);
+ mutex_lock(&queue_handler_mutex);
+ if (queue_handler[pf] != qh) {
+ mutex_unlock(&queue_handler_mutex);
+ return -EINVAL;
+ }
+
+ rcu_assign_pointer(queue_handler[pf], NULL);
+ mutex_unlock(&queue_handler_mutex);
+
+ synchronize_rcu();
return 0;
}
{
int pf;
- write_lock_bh(&queue_handler_lock);
+ mutex_lock(&queue_handler_mutex);
for (pf = 0; pf < NPROTO; pf++) {
if (queue_handler[pf] == qh)
- queue_handler[pf] = NULL;
+ rcu_assign_pointer(queue_handler[pf], NULL);
}
- write_unlock_bh(&queue_handler_lock);
+ mutex_unlock(&queue_handler_mutex);
+
+ synchronize_rcu();
}
EXPORT_SYMBOL_GPL(nf_unregister_queue_handlers);
struct net_device *physoutdev = NULL;
#endif
struct nf_afinfo *afinfo;
+ struct nf_queue_handler *qh;
/* QUEUE == DROP if noone is waiting, to be safe. */
- read_lock(&queue_handler_lock);
- if (!queue_handler[pf]) {
- read_unlock(&queue_handler_lock);
+ rcu_read_lock();
+
+ qh = rcu_dereference(queue_handler[pf]);
+ if (!qh) {
+ rcu_read_unlock();
kfree_skb(skb);
return 1;
}
afinfo = nf_get_afinfo(pf);
if (!afinfo) {
- read_unlock(&queue_handler_lock);
+ rcu_read_unlock();
kfree_skb(skb);
return 1;
}
if (net_ratelimit())
printk(KERN_ERR "OOM queueing packet %p\n",
skb);
- read_unlock(&queue_handler_lock);
+ rcu_read_unlock();
kfree_skb(skb);
return 1;
}
/* If it's going away, ignore hook. */
if (!try_module_get(info->elem->owner)) {
- read_unlock(&queue_handler_lock);
+ rcu_read_unlock();
kfree(info);
return 0;
}
}
#endif
afinfo->saveroute(skb, info);
- status = queue_handler[pf]->outfn(skb, info, queuenum,
- queue_handler[pf]->data);
+ status = qh->outfn(skb, info, queuenum, qh->data);
- read_unlock(&queue_handler_lock);
+ rcu_read_unlock();
if (status < 0) {
/* James M doesn't say fuck enough. */
loff_t *pos = v;
struct nf_queue_handler *qh;
- read_lock_bh(&queue_handler_lock);
- qh = queue_handler[*pos];
+ rcu_read_lock();
+ qh = rcu_dereference(queue_handler[*pos]);
if (!qh)
ret = seq_printf(s, "%2lld NONE\n", *pos);
else
ret = seq_printf(s, "%2lld %s\n", *pos, qh->name);
- read_unlock_bh(&queue_handler_lock);
+ rcu_read_unlock();
return ret;
}
-static struct seq_operations nfqueue_seq_ops = {
+static const struct seq_operations nfqueue_seq_ops = {
.start = seq_start,
.next = seq_next,
.stop = seq_stop,
inst->flushtimeout, atomic_read(&inst->use));
}
-static struct seq_operations nful_seq_ops = {
+static const struct seq_operations nful_seq_ops = {
.start = seq_start,
.next = seq_next,
.stop = seq_stop,
case NFQNL_CFG_CMD_PF_UNBIND:
QDEBUG("unregistering queue handler for pf=%u\n",
ntohs(cmd->pf));
- /* This is a bug and a feature. We can unregister
- * other handlers(!) */
- ret = nf_unregister_queue_handler(ntohs(cmd->pf));
+ ret = nf_unregister_queue_handler(ntohs(cmd->pf), &nfqh);
break;
default:
ret = -EINVAL;
atomic_read(&inst->use));
}
-static struct seq_operations nfqnl_seq_ops = {
+static const struct seq_operations nfqnl_seq_ops = {
.start = seq_start,
.next = seq_next,
.stop = seq_stop,
return -EINVAL;
}
if (match->hooks && (hook_mask & ~match->hooks) != 0) {
- printk("%s_tables: %s match: bad hook_mask %u\n",
- xt_prefix[family], match->name, hook_mask);
+ printk("%s_tables: %s match: bad hook_mask %u/%u\n",
+ xt_prefix[family], match->name, hook_mask, match->hooks);
return -EINVAL;
}
if (match->proto && (match->proto != proto || inv_proto)) {
return -EINVAL;
}
if (target->hooks && (hook_mask & ~target->hooks) != 0) {
- printk("%s_tables: %s target: bad hook_mask %u\n",
- xt_prefix[family], target->name, hook_mask);
+ printk("%s_tables: %s target: bad hook_mask %u/%u\n",
+ xt_prefix[family], target->name, hook_mask,
+ target->hooks);
return -EINVAL;
}
if (target->proto && (target->proto != proto || inv_proto)) {
return 0;
}
-static struct seq_operations xt_tgt_seq_ops = {
+static const struct seq_operations xt_tgt_seq_ops = {
.start = xt_tgt_seq_start,
.next = xt_tgt_seq_next,
.stop = xt_tgt_seq_stop,
return XT_CONTINUE;
}
-static struct xt_target xt_classify_target[] = {
+static struct xt_target xt_classify_target[] __read_mostly = {
{
.family = AF_INET,
.name = "CLASSIFY",
return XT_CONTINUE;
}
-static int
+static bool
checkentry(const char *tablename,
const void *entry,
const struct xt_target *target,
void *targinfo,
unsigned int hook_mask)
{
- struct xt_connmark_target_info *matchinfo = targinfo;
+ const struct xt_connmark_target_info *matchinfo = targinfo;
if (nf_ct_l3proto_try_module_get(target->family) < 0) {
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", target->family);
- return 0;
+ return false;
}
if (matchinfo->mode == XT_CONNMARK_RESTORE) {
if (strcmp(tablename, "mangle") != 0) {
printk(KERN_WARNING "CONNMARK: restore can only be "
"called from \"mangle\" table, not \"%s\"\n",
tablename);
- return 0;
+ return false;
}
}
if (matchinfo->mark > 0xffffffff || matchinfo->mask > 0xffffffff) {
printk(KERN_WARNING "CONNMARK: Only supports 32bit mark\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static void
static void compat_from_user(void *dst, void *src)
{
- struct compat_xt_connmark_target_info *cm = src;
+ const struct compat_xt_connmark_target_info *cm = src;
struct xt_connmark_target_info m = {
.mark = cm->mark,
.mask = cm->mask,
static int compat_to_user(void __user *dst, void *src)
{
- struct xt_connmark_target_info *m = src;
+ const struct xt_connmark_target_info *m = src;
struct compat_xt_connmark_target_info cm = {
.mark = m->mark,
.mask = m->mask,
}
#endif /* CONFIG_COMPAT */
-static struct xt_target xt_connmark_target[] = {
+static struct xt_target xt_connmark_target[] __read_mostly = {
{
.name = "CONNMARK",
.family = AF_INET,
* If the packet has a security mark and the connection does not, copy
* the security mark from the packet to the connection.
*/
-static void secmark_save(struct sk_buff *skb)
+static void secmark_save(const struct sk_buff *skb)
{
if (skb->secmark) {
struct nf_conn *ct;
return XT_CONTINUE;
}
-static int checkentry(const char *tablename, const void *entry,
- const struct xt_target *target, void *targinfo,
- unsigned int hook_mask)
+static bool checkentry(const char *tablename, const void *entry,
+ const struct xt_target *target, void *targinfo,
+ unsigned int hook_mask)
{
- struct xt_connsecmark_target_info *info = targinfo;
+ const struct xt_connsecmark_target_info *info = targinfo;
if (nf_ct_l3proto_try_module_get(target->family) < 0) {
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", target->family);
- return 0;
+ return false;
}
switch (info->mode) {
case CONNSECMARK_SAVE:
default:
printk(KERN_INFO PFX "invalid mode: %hu\n", info->mode);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static void
nf_ct_l3proto_module_put(target->family);
}
-static struct xt_target xt_connsecmark_target[] = {
+static struct xt_target xt_connsecmark_target[] __read_mostly = {
{
.name = "CONNSECMARK",
.family = AF_INET,
return XT_CONTINUE;
}
-static int checkentry(const char *tablename,
- const void *e_void,
- const struct xt_target *target,
- void *targinfo,
- unsigned int hook_mask)
+static bool checkentry(const char *tablename,
+ const void *e_void,
+ const struct xt_target *target,
+ void *targinfo,
+ unsigned int hook_mask)
{
const u_int8_t dscp = ((struct xt_DSCP_info *)targinfo)->dscp;
- if ((dscp > XT_DSCP_MAX)) {
+ if (dscp > XT_DSCP_MAX) {
printk(KERN_WARNING "DSCP: dscp %x out of range\n", dscp);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_target xt_dscp_target[] = {
+static struct xt_target xt_dscp_target[] __read_mostly = {
{
.name = "DSCP",
.family = AF_INET,
}
-static int
+static bool
checkentry_v0(const char *tablename,
const void *entry,
const struct xt_target *target,
void *targinfo,
unsigned int hook_mask)
{
- struct xt_mark_target_info *markinfo = targinfo;
+ const struct xt_mark_target_info *markinfo = targinfo;
if (markinfo->mark > 0xffffffff) {
printk(KERN_WARNING "MARK: Only supports 32bit wide mark\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static int
+static bool
checkentry_v1(const char *tablename,
const void *entry,
const struct xt_target *target,
void *targinfo,
unsigned int hook_mask)
{
- struct xt_mark_target_info_v1 *markinfo = targinfo;
+ const struct xt_mark_target_info_v1 *markinfo = targinfo;
if (markinfo->mode != XT_MARK_SET
&& markinfo->mode != XT_MARK_AND
&& markinfo->mode != XT_MARK_OR) {
printk(KERN_WARNING "MARK: unknown mode %u\n",
markinfo->mode);
- return 0;
+ return false;
}
if (markinfo->mark > 0xffffffff) {
printk(KERN_WARNING "MARK: Only supports 32bit wide mark\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
#ifdef CONFIG_COMPAT
static void compat_from_user_v1(void *dst, void *src)
{
- struct compat_xt_mark_target_info_v1 *cm = src;
+ const struct compat_xt_mark_target_info_v1 *cm = src;
struct xt_mark_target_info_v1 m = {
.mark = cm->mark,
.mode = cm->mode,
static int compat_to_user_v1(void __user *dst, void *src)
{
- struct xt_mark_target_info_v1 *m = src;
+ const struct xt_mark_target_info_v1 *m = src;
struct compat_xt_mark_target_info_v1 cm = {
.mark = m->mark,
.mode = m->mode,
}
#endif /* CONFIG_COMPAT */
-static struct xt_target xt_mark_target[] = {
+static struct xt_target xt_mark_target[] __read_mostly = {
{
.name = "MARK",
.family = AF_INET,
return XT_CONTINUE;
}
-static int
+static bool
nflog_checkentry(const char *tablename, const void *entry,
const struct xt_target *target, void *targetinfo,
unsigned int hookmask)
{
- struct xt_nflog_info *info = targetinfo;
+ const struct xt_nflog_info *info = targetinfo;
if (info->flags & ~XT_NFLOG_MASK)
- return 0;
+ return false;
if (info->prefix[sizeof(info->prefix) - 1] != '\0')
- return 0;
- return 1;
+ return false;
+ return true;
}
-static struct xt_target xt_nflog_target[] = {
+static struct xt_target xt_nflog_target[] __read_mostly = {
{
.name = "NFLOG",
.family = AF_INET,
return NF_QUEUE_NR(tinfo->queuenum);
}
-static struct xt_target xt_nfqueue_target[] = {
+static struct xt_target xt_nfqueue_target[] __read_mostly = {
{
.name = "NFQUEUE",
.family = AF_INET,
return XT_CONTINUE;
}
-static struct xt_target xt_notrack_target[] = {
+static struct xt_target xt_notrack_target[] __read_mostly = {
{
.name = "NOTRACK",
.family = AF_INET,
return XT_CONTINUE;
}
-static int checkentry_selinux(struct xt_secmark_target_info *info)
+static bool checkentry_selinux(struct xt_secmark_target_info *info)
{
int err;
struct xt_secmark_target_selinux_info *sel = &info->u.sel;
if (err == -EINVAL)
printk(KERN_INFO PFX "invalid SELinux context \'%s\'\n",
sel->selctx);
- return 0;
+ return false;
}
if (!sel->selsid) {
printk(KERN_INFO PFX "unable to map SELinux context \'%s\'\n",
sel->selctx);
- return 0;
+ return false;
}
err = selinux_relabel_packet_permission(sel->selsid);
if (err) {
printk(KERN_INFO PFX "unable to obtain relabeling permission\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static int checkentry(const char *tablename, const void *entry,
- const struct xt_target *target, void *targinfo,
- unsigned int hook_mask)
+static bool checkentry(const char *tablename, const void *entry,
+ const struct xt_target *target, void *targinfo,
+ unsigned int hook_mask)
{
struct xt_secmark_target_info *info = targinfo;
if (mode && mode != info->mode) {
printk(KERN_INFO PFX "mode already set to %hu cannot mix with "
"rules for mode %hu\n", mode, info->mode);
- return 0;
+ return false;
}
switch (info->mode) {
case SECMARK_MODE_SEL:
if (!checkentry_selinux(info))
- return 0;
+ return false;
break;
default:
printk(KERN_INFO PFX "invalid mode: %hu\n", info->mode);
- return 0;
+ return false;
}
if (!mode)
mode = info->mode;
- return 1;
+ return true;
}
-static struct xt_target xt_secmark_target[] = {
+static struct xt_target xt_secmark_target[] __read_mostly = {
{
.name = "SECMARK",
.family = AF_INET,
return 0;
opt[i+2] = (newmss & 0xff00) >> 8;
- opt[i+3] = (newmss & 0x00ff);
+ opt[i+3] = newmss & 0x00ff;
nf_proto_csum_replace2(&tcph->check, *pskb,
htons(oldmss), htons(newmss), 0);
opt[0] = TCPOPT_MSS;
opt[1] = TCPOLEN_MSS;
opt[2] = (newmss & 0xff00) >> 8;
- opt[3] = (newmss & 0x00ff);
+ opt[3] = newmss & 0x00ff;
nf_proto_csum_replace4(&tcph->check, *pskb, 0, *((__be32 *)opt), 0);
#define TH_SYN 0x02
/* Must specify -p tcp --syn */
-static inline int find_syn_match(const struct xt_entry_match *m)
+static inline bool find_syn_match(const struct xt_entry_match *m)
{
const struct xt_tcp *tcpinfo = (const struct xt_tcp *)m->data;
if (strcmp(m->u.kernel.match->name, "tcp") == 0 &&
tcpinfo->flg_cmp & TH_SYN &&
!(tcpinfo->invflags & XT_TCP_INV_FLAGS))
- return 1;
+ return true;
- return 0;
+ return false;
}
-static int
+static bool
xt_tcpmss_checkentry4(const char *tablename,
const void *entry,
const struct xt_target *target,
(1 << NF_IP_POST_ROUTING))) != 0) {
printk("xt_TCPMSS: path-MTU clamping only supported in "
"FORWARD, OUTPUT and POSTROUTING hooks\n");
- return 0;
+ return false;
}
if (IPT_MATCH_ITERATE(e, find_syn_match))
- return 1;
+ return true;
printk("xt_TCPMSS: Only works on TCP SYN packets\n");
- return 0;
+ return false;
}
#if defined(CONFIG_IP6_NF_IPTABLES) || defined(CONFIG_IP6_NF_IPTABLES_MODULE)
-static int
+static bool
xt_tcpmss_checkentry6(const char *tablename,
const void *entry,
const struct xt_target *target,
(1 << NF_IP6_POST_ROUTING))) != 0) {
printk("xt_TCPMSS: path-MTU clamping only supported in "
"FORWARD, OUTPUT and POSTROUTING hooks\n");
- return 0;
+ return false;
}
if (IP6T_MATCH_ITERATE(e, find_syn_match))
- return 1;
+ return true;
printk("xt_TCPMSS: Only works on TCP SYN packets\n");
- return 0;
+ return false;
}
#endif
-static struct xt_target xt_tcpmss_reg[] = {
+static struct xt_target xt_tcpmss_reg[] __read_mostly = {
{
.family = AF_INET,
.name = "TCPMSS",
--- /dev/null
+/* This is a module which is used to mark packets for tracing.
+ */
+#include <linux/module.h>
+#include <linux/skbuff.h>
+
+#include <linux/netfilter/x_tables.h>
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("ipt_TRACE");
+MODULE_ALIAS("ip6t_TRACE");
+
+static unsigned int
+target(struct sk_buff **pskb,
+ const struct net_device *in,
+ const struct net_device *out,
+ unsigned int hooknum,
+ const struct xt_target *target,
+ const void *targinfo)
+{
+ (*pskb)->nf_trace = 1;
+ return XT_CONTINUE;
+}
+
+static struct xt_target xt_trace_target[] __read_mostly = {
+ {
+ .name = "TRACE",
+ .family = AF_INET,
+ .target = target,
+ .table = "raw",
+ .me = THIS_MODULE,
+ },
+ {
+ .name = "TRACE",
+ .family = AF_INET6,
+ .target = target,
+ .table = "raw",
+ .me = THIS_MODULE,
+ },
+};
+
+static int __init xt_trace_init(void)
+{
+ return xt_register_targets(xt_trace_target,
+ ARRAY_SIZE(xt_trace_target));
+}
+
+static void __exit xt_trace_fini(void)
+{
+ xt_unregister_targets(xt_trace_target, ARRAY_SIZE(xt_trace_target));
+}
+
+module_init(xt_trace_init);
+module_exit(xt_trace_fini);
MODULE_ALIAS("ipt_comment");
MODULE_ALIAS("ip6t_comment");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protooff,
- int *hotdrop)
+ bool *hotdrop)
{
/* We always match */
- return 1;
+ return true;
}
-static struct xt_match xt_comment_match[] = {
+static struct xt_match xt_comment_match[] __read_mostly = {
{
.name = "comment",
.family = AF_INET,
MODULE_DESCRIPTION("iptables match for matching number of pkts/bytes per connection");
MODULE_ALIAS("ipt_connbytes");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_connbytes_info *sinfo = matchinfo;
- struct nf_conn *ct;
+ const struct nf_conn *ct;
enum ip_conntrack_info ctinfo;
u_int64_t what = 0; /* initialize to make gcc happy */
u_int64_t bytes = 0;
ct = nf_ct_get(skb, &ctinfo);
if (!ct)
- return 0;
+ return false;
counters = ct->counters;
switch (sinfo->what) {
}
if (sinfo->count.to)
- return (what <= sinfo->count.to && what >= sinfo->count.from);
+ return what <= sinfo->count.to && what >= sinfo->count.from;
else
- return (what >= sinfo->count.from);
+ return what >= sinfo->count.from;
}
-static int check(const char *tablename,
- const void *ip,
- const struct xt_match *match,
- void *matchinfo,
- unsigned int hook_mask)
+static bool check(const char *tablename,
+ const void *ip,
+ const struct xt_match *match,
+ void *matchinfo,
+ unsigned int hook_mask)
{
const struct xt_connbytes_info *sinfo = matchinfo;
if (sinfo->what != XT_CONNBYTES_PKTS &&
sinfo->what != XT_CONNBYTES_BYTES &&
sinfo->what != XT_CONNBYTES_AVGPKT)
- return 0;
+ return false;
if (sinfo->direction != XT_CONNBYTES_DIR_ORIGINAL &&
sinfo->direction != XT_CONNBYTES_DIR_REPLY &&
sinfo->direction != XT_CONNBYTES_DIR_BOTH)
- return 0;
+ return false;
if (nf_ct_l3proto_try_module_get(match->family) < 0) {
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static void
nf_ct_l3proto_module_put(match->family);
}
-static struct xt_match xt_connbytes_match[] = {
+static struct xt_match xt_connbytes_match[] __read_mostly = {
{
.name = "connbytes",
.family = AF_INET,
MODULE_LICENSE("GPL");
MODULE_ALIAS("ipt_connmark");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_connmark_info *info = matchinfo;
- struct nf_conn *ct;
+ const struct nf_conn *ct;
enum ip_conntrack_info ctinfo;
ct = nf_ct_get(skb, &ctinfo);
if (!ct)
- return 0;
+ return false;
- return (((ct->mark) & info->mask) == info->mark) ^ info->invert;
+ return ((ct->mark & info->mask) == info->mark) ^ info->invert;
}
-static int
+static bool
checkentry(const char *tablename,
const void *ip,
const struct xt_match *match,
void *matchinfo,
unsigned int hook_mask)
{
- struct xt_connmark_info *cm = matchinfo;
+ const struct xt_connmark_info *cm = matchinfo;
if (cm->mark > 0xffffffff || cm->mask > 0xffffffff) {
printk(KERN_WARNING "connmark: only support 32bit mark\n");
- return 0;
+ return false;
}
if (nf_ct_l3proto_try_module_get(match->family) < 0) {
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static void
static void compat_from_user(void *dst, void *src)
{
- struct compat_xt_connmark_info *cm = src;
+ const struct compat_xt_connmark_info *cm = src;
struct xt_connmark_info m = {
.mark = cm->mark,
.mask = cm->mask,
static int compat_to_user(void __user *dst, void *src)
{
- struct xt_connmark_info *m = src;
+ const struct xt_connmark_info *m = src;
struct compat_xt_connmark_info cm = {
.mark = m->mark,
.mask = m->mask,
}
#endif /* CONFIG_COMPAT */
-static struct xt_match xt_connmark_match[] = {
+static struct xt_match xt_connmark_match[] __read_mostly = {
{
.name = "connmark",
.family = AF_INET,
MODULE_DESCRIPTION("iptables connection tracking match module");
MODULE_ALIAS("ipt_conntrack");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_conntrack_info *sinfo = matchinfo;
- struct nf_conn *ct;
+ const struct nf_conn *ct;
enum ip_conntrack_info ctinfo;
unsigned int statebit;
- ct = nf_ct_get((struct sk_buff *)skb, &ctinfo);
+ ct = nf_ct_get(skb, &ctinfo);
#define FWINV(bool,invflg) ((bool) ^ !!(sinfo->invflags & invflg))
}
if (FWINV((statebit & sinfo->statemask) == 0,
XT_CONNTRACK_STATE))
- return 0;
+ return false;
}
if (ct == NULL) {
if (sinfo->flags & ~XT_CONNTRACK_STATE)
- return 0;
- return 1;
+ return false;
+ return true;
}
if (sinfo->flags & XT_CONNTRACK_PROTO &&
FWINV(ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.protonum !=
sinfo->tuple[IP_CT_DIR_ORIGINAL].dst.protonum,
XT_CONNTRACK_PROTO))
- return 0;
+ return false;
if (sinfo->flags & XT_CONNTRACK_ORIGSRC &&
FWINV((ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.ip &
sinfo->sipmsk[IP_CT_DIR_ORIGINAL].s_addr) !=
sinfo->tuple[IP_CT_DIR_ORIGINAL].src.ip,
XT_CONNTRACK_ORIGSRC))
- return 0;
+ return false;
if (sinfo->flags & XT_CONNTRACK_ORIGDST &&
FWINV((ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.dst.u3.ip &
sinfo->dipmsk[IP_CT_DIR_ORIGINAL].s_addr) !=
sinfo->tuple[IP_CT_DIR_ORIGINAL].dst.ip,
XT_CONNTRACK_ORIGDST))
- return 0;
+ return false;
if (sinfo->flags & XT_CONNTRACK_REPLSRC &&
FWINV((ct->tuplehash[IP_CT_DIR_REPLY].tuple.src.u3.ip &
sinfo->sipmsk[IP_CT_DIR_REPLY].s_addr) !=
sinfo->tuple[IP_CT_DIR_REPLY].src.ip,
XT_CONNTRACK_REPLSRC))
- return 0;
+ return false;
if (sinfo->flags & XT_CONNTRACK_REPLDST &&
FWINV((ct->tuplehash[IP_CT_DIR_REPLY].tuple.dst.u3.ip &
sinfo->dipmsk[IP_CT_DIR_REPLY].s_addr) !=
sinfo->tuple[IP_CT_DIR_REPLY].dst.ip,
XT_CONNTRACK_REPLDST))
- return 0;
+ return false;
if (sinfo->flags & XT_CONNTRACK_STATUS &&
FWINV((ct->status & sinfo->statusmask) == 0,
XT_CONNTRACK_STATUS))
- return 0;
+ return false;
if(sinfo->flags & XT_CONNTRACK_EXPIRES) {
unsigned long expires = timer_pending(&ct->timeout) ?
if (FWINV(!(expires >= sinfo->expires_min &&
expires <= sinfo->expires_max),
XT_CONNTRACK_EXPIRES))
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static int
+static bool
checkentry(const char *tablename,
const void *ip,
const struct xt_match *match,
if (nf_ct_l3proto_try_module_get(match->family) < 0) {
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static void destroy(const struct xt_match *match, void *matchinfo)
static void compat_from_user(void *dst, void *src)
{
- struct compat_xt_conntrack_info *cm = src;
+ const struct compat_xt_conntrack_info *cm = src;
struct xt_conntrack_info m = {
.statemask = cm->statemask,
.statusmask = cm->statusmask,
static int compat_to_user(void __user *dst, void *src)
{
- struct xt_conntrack_info *m = src;
+ const struct xt_conntrack_info *m = src;
struct compat_xt_conntrack_info cm = {
.statemask = m->statemask,
.statusmask = m->statusmask,
}
#endif
-static struct xt_match conntrack_match = {
+static struct xt_match conntrack_match __read_mostly = {
.name = "conntrack",
.match = match,
.checkentry = checkentry,
static unsigned char *dccp_optbuf;
static DEFINE_SPINLOCK(dccp_buflock);
-static inline int
+static inline bool
dccp_find_option(u_int8_t option,
const struct sk_buff *skb,
unsigned int protoff,
const struct dccp_hdr *dh,
- int *hotdrop)
+ bool *hotdrop)
{
/* tcp.doff is only 4 bits, ie. max 15 * 4 bytes */
- unsigned char *op;
+ const unsigned char *op;
unsigned int optoff = __dccp_hdr_len(dh);
unsigned int optlen = dh->dccph_doff*4 - __dccp_hdr_len(dh);
unsigned int i;
if (dh->dccph_doff * 4 < __dccp_hdr_len(dh)) {
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
if (!optlen)
- return 0;
+ return false;
spin_lock_bh(&dccp_buflock);
op = skb_header_pointer(skb, protoff + optoff, optlen, dccp_optbuf);
if (op == NULL) {
/* If we don't have the whole header, drop packet. */
spin_unlock_bh(&dccp_buflock);
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
for (i = 0; i < optlen; ) {
if (op[i] == option) {
spin_unlock_bh(&dccp_buflock);
- return 1;
+ return true;
}
if (op[i] < 2)
}
spin_unlock_bh(&dccp_buflock);
- return 0;
+ return false;
}
-static inline int
+static inline bool
match_types(const struct dccp_hdr *dh, u_int16_t typemask)
{
- return (typemask & (1 << dh->dccph_type));
+ return typemask & (1 << dh->dccph_type);
}
-static inline int
+static inline bool
match_option(u_int8_t option, const struct sk_buff *skb, unsigned int protoff,
- const struct dccp_hdr *dh, int *hotdrop)
+ const struct dccp_hdr *dh, bool *hotdrop)
{
return dccp_find_option(option, skb, protoff, dh, hotdrop);
}
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_dccp_info *info = matchinfo;
struct dccp_hdr _dh, *dh;
if (offset)
- return 0;
+ return false;
dh = skb_header_pointer(skb, protoff, sizeof(_dh), &_dh);
if (dh == NULL) {
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
- return DCCHECK(((ntohs(dh->dccph_sport) >= info->spts[0])
- && (ntohs(dh->dccph_sport) <= info->spts[1])),
+ return DCCHECK(ntohs(dh->dccph_sport) >= info->spts[0]
+ && ntohs(dh->dccph_sport) <= info->spts[1],
XT_DCCP_SRC_PORTS, info->flags, info->invflags)
- && DCCHECK(((ntohs(dh->dccph_dport) >= info->dpts[0])
- && (ntohs(dh->dccph_dport) <= info->dpts[1])),
+ && DCCHECK(ntohs(dh->dccph_dport) >= info->dpts[0]
+ && ntohs(dh->dccph_dport) <= info->dpts[1],
XT_DCCP_DEST_PORTS, info->flags, info->invflags)
&& DCCHECK(match_types(dh, info->typemask),
XT_DCCP_TYPE, info->flags, info->invflags)
XT_DCCP_OPTION, info->flags, info->invflags);
}
-static int
+static bool
checkentry(const char *tablename,
const void *inf,
const struct xt_match *match,
&& !(info->invflags & ~info->flags);
}
-static struct xt_match xt_dccp_match[] = {
+static struct xt_match xt_dccp_match[] __read_mostly = {
{
.name = "dccp",
.family = AF_INET,
MODULE_ALIAS("ipt_dscp");
MODULE_ALIAS("ip6t_dscp");
-static int match(const struct sk_buff *skb,
- const struct net_device *in,
- const struct net_device *out,
- const struct xt_match *match,
- const void *matchinfo,
- int offset,
- unsigned int protoff,
- int *hotdrop)
+static bool match(const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ const struct xt_match *match,
+ const void *matchinfo,
+ int offset,
+ unsigned int protoff,
+ bool *hotdrop)
{
const struct xt_dscp_info *info = matchinfo;
u_int8_t dscp = ipv4_get_dsfield(ip_hdr(skb)) >> XT_DSCP_SHIFT;
return (dscp == info->dscp) ^ !!info->invert;
}
-static int match6(const struct sk_buff *skb,
- const struct net_device *in,
- const struct net_device *out,
- const struct xt_match *match,
- const void *matchinfo,
- int offset,
- unsigned int protoff,
- int *hotdrop)
+static bool match6(const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ const struct xt_match *match,
+ const void *matchinfo,
+ int offset,
+ unsigned int protoff,
+ bool *hotdrop)
{
const struct xt_dscp_info *info = matchinfo;
u_int8_t dscp = ipv6_get_dsfield(ipv6_hdr(skb)) >> XT_DSCP_SHIFT;
return (dscp == info->dscp) ^ !!info->invert;
}
-static int checkentry(const char *tablename,
- const void *info,
- const struct xt_match *match,
- void *matchinfo,
- unsigned int hook_mask)
+static bool checkentry(const char *tablename,
+ const void *info,
+ const struct xt_match *match,
+ void *matchinfo,
+ unsigned int hook_mask)
{
const u_int8_t dscp = ((struct xt_dscp_info *)matchinfo)->dscp;
if (dscp > XT_DSCP_MAX) {
printk(KERN_ERR "xt_dscp: dscp %x out of range\n", dscp);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match xt_dscp_match[] = {
+static struct xt_match xt_dscp_match[] __read_mostly = {
{
.name = "dscp",
.family = AF_INET,
#endif
/* Returns 1 if the spi is matched by the range, 0 otherwise */
-static inline int
-spi_match(u_int32_t min, u_int32_t max, u_int32_t spi, int invert)
+static inline bool
+spi_match(u_int32_t min, u_int32_t max, u_int32_t spi, bool invert)
{
- int r = 0;
+ bool r;
duprintf("esp spi_match:%c 0x%x <= 0x%x <= 0x%x", invert ? '!' : ' ',
min, spi, max);
r = (spi >= min && spi <= max) ^ invert;
return r;
}
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
struct ip_esp_hdr _esp, *eh;
const struct xt_esp *espinfo = matchinfo;
/* Must not be a fragment. */
if (offset)
- return 0;
+ return false;
eh = skb_header_pointer(skb, protoff, sizeof(_esp), &_esp);
if (eh == NULL) {
* can't. Hence, no choice but to drop.
*/
duprintf("Dropping evil ESP tinygram.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
return spi_match(espinfo->spis[0], espinfo->spis[1], ntohl(eh->spi),
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
checkentry(const char *tablename,
const void *ip_void,
const struct xt_match *match,
if (espinfo->invflags & ~XT_ESP_INV_MASK) {
duprintf("xt_esp: unknown flags %X\n", espinfo->invflags);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match xt_esp_match[] = {
+static struct xt_match xt_esp_match[] __read_mostly = {
{
.name = "esp",
.family = AF_INET,
static HLIST_HEAD(hashlimit_htables);
static struct kmem_cache *hashlimit_cachep __read_mostly;
-static inline int dst_cmp(const struct dsthash_ent *ent, struct dsthash_dst *b)
+static inline bool dst_cmp(const struct dsthash_ent *ent,
+ const struct dsthash_dst *b)
{
return !memcmp(&ent->dst, b, sizeof(ent->dst));
}
}
static struct dsthash_ent *
-dsthash_find(const struct xt_hashlimit_htable *ht, struct dsthash_dst *dst)
+dsthash_find(const struct xt_hashlimit_htable *ht,
+ const struct dsthash_dst *dst)
{
struct dsthash_ent *ent;
struct hlist_node *pos;
/* allocate dsthash_ent, initialize dst, put in htable and lock it */
static struct dsthash_ent *
-dsthash_alloc_init(struct xt_hashlimit_htable *ht, struct dsthash_dst *dst)
+dsthash_alloc_init(struct xt_hashlimit_htable *ht,
+ const struct dsthash_dst *dst)
{
struct dsthash_ent *ent;
return 0;
}
-static int select_all(struct xt_hashlimit_htable *ht, struct dsthash_ent *he)
+static bool select_all(const struct xt_hashlimit_htable *ht,
+ const struct dsthash_ent *he)
{
return 1;
}
-static int select_gc(struct xt_hashlimit_htable *ht, struct dsthash_ent *he)
+static bool select_gc(const struct xt_hashlimit_htable *ht,
+ const struct dsthash_ent *he)
{
- return (jiffies >= he->expires);
+ return jiffies >= he->expires;
}
static void htable_selective_cleanup(struct xt_hashlimit_htable *ht,
- int (*select)(struct xt_hashlimit_htable *ht,
- struct dsthash_ent *he))
+ bool (*select)(const struct xt_hashlimit_htable *ht,
+ const struct dsthash_ent *he))
{
unsigned int i;
vfree(hinfo);
}
-static struct xt_hashlimit_htable *htable_find_get(char *name, int family)
+static struct xt_hashlimit_htable *htable_find_get(const char *name,
+ int family)
{
struct xt_hashlimit_htable *hinfo;
struct hlist_node *pos;
}
static int
-hashlimit_init_dst(struct xt_hashlimit_htable *hinfo, struct dsthash_dst *dst,
+hashlimit_init_dst(const struct xt_hashlimit_htable *hinfo,
+ struct dsthash_dst *dst,
const struct sk_buff *skb, unsigned int protoff)
{
__be16 _ports[2], *ports;
return 0;
}
-static int
+static bool
hashlimit_match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
- struct xt_hashlimit_info *r =
- ((struct xt_hashlimit_info *)matchinfo)->u.master;
+ const struct xt_hashlimit_info *r =
+ ((const struct xt_hashlimit_info *)matchinfo)->u.master;
struct xt_hashlimit_htable *hinfo = r->hinfo;
unsigned long now = jiffies;
struct dsthash_ent *dh;
/* We're underlimit. */
dh->rateinfo.credit -= dh->rateinfo.cost;
spin_unlock_bh(&hinfo->lock);
- return 1;
+ return true;
}
spin_unlock_bh(&hinfo->lock);
/* default case: we're overlimit, thus don't match */
- return 0;
+ return false;
hotdrop:
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
-static int
+static bool
hashlimit_checkentry(const char *tablename,
const void *inf,
const struct xt_match *match,
user2credits(r->cfg.avg * r->cfg.burst) < user2credits(r->cfg.avg)) {
printk(KERN_ERR "xt_hashlimit: overflow, try lower: %u/%u\n",
r->cfg.avg, r->cfg.burst);
- return 0;
+ return false;
}
if (r->cfg.mode == 0 ||
r->cfg.mode > (XT_HASHLIMIT_HASH_DPT |
XT_HASHLIMIT_HASH_DIP |
XT_HASHLIMIT_HASH_SIP |
XT_HASHLIMIT_HASH_SPT))
- return 0;
+ return false;
if (!r->cfg.gc_interval)
- return 0;
+ return false;
if (!r->cfg.expire)
- return 0;
+ return false;
if (r->name[sizeof(r->name) - 1] != '\0')
- return 0;
+ return false;
/* This is the best we've got: We cannot release and re-grab lock,
* since checkentry() is called before x_tables.c grabs xt_mutex.
r->hinfo = htable_find_get(r->name, match->family);
if (!r->hinfo && htable_create(r, match->family) != 0) {
mutex_unlock(&hlimit_mutex);
- return 0;
+ return false;
}
mutex_unlock(&hlimit_mutex);
/* Ugly hack: For SMP, we only want to use one set */
r->u.master = r;
- return 1;
+ return true;
}
static void
hashlimit_destroy(const struct xt_match *match, void *matchinfo)
{
- struct xt_hashlimit_info *r = matchinfo;
+ const struct xt_hashlimit_info *r = matchinfo;
htable_put(r->hinfo);
}
}
#endif
-static struct xt_match xt_hashlimit[] = {
+static struct xt_match xt_hashlimit[] __read_mostly = {
{
.name = "hashlimit",
.family = AF_INET,
return 0;
}
-static struct seq_operations dl_seq_ops = {
+static const struct seq_operations dl_seq_ops = {
.start = dl_seq_start,
.next = dl_seq_next,
.stop = dl_seq_stop,
MODULE_ALIAS("ipt_helper");
MODULE_ALIAS("ip6t_helper");
-#if 0
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_helper_info *info = matchinfo;
- struct nf_conn *ct;
- struct nf_conn_help *master_help;
+ const struct nf_conn *ct;
+ const struct nf_conn_help *master_help;
+ const struct nf_conntrack_helper *helper;
enum ip_conntrack_info ctinfo;
- int ret = info->invert;
+ bool ret = info->invert;
- ct = nf_ct_get((struct sk_buff *)skb, &ctinfo);
- if (!ct) {
- DEBUGP("xt_helper: Eek! invalid conntrack?\n");
+ ct = nf_ct_get(skb, &ctinfo);
+ if (!ct || !ct->master)
return ret;
- }
-
- if (!ct->master) {
- DEBUGP("xt_helper: conntrack %p has no master\n", ct);
- return ret;
- }
- read_lock_bh(&nf_conntrack_lock);
master_help = nfct_help(ct->master);
- if (!master_help || !master_help->helper) {
- DEBUGP("xt_helper: master ct %p has no helper\n",
- exp->expectant);
- goto out_unlock;
- }
+ if (!master_help)
+ return ret;
- DEBUGP("master's name = %s , info->name = %s\n",
- ct->master->helper->name, info->name);
+ /* rcu_read_lock()ed by nf_hook_slow */
+ helper = rcu_dereference(master_help->helper);
+ if (!helper)
+ return ret;
if (info->name[0] == '\0')
- ret ^= 1;
+ ret = !ret;
else
ret ^= !strncmp(master_help->helper->name, info->name,
strlen(master_help->helper->name));
-out_unlock:
- read_unlock_bh(&nf_conntrack_lock);
return ret;
}
-static int check(const char *tablename,
- const void *inf,
- const struct xt_match *match,
- void *matchinfo,
- unsigned int hook_mask)
+static bool check(const char *tablename,
+ const void *inf,
+ const struct xt_match *match,
+ void *matchinfo,
+ unsigned int hook_mask)
{
struct xt_helper_info *info = matchinfo;
if (nf_ct_l3proto_try_module_get(match->family) < 0) {
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
- return 0;
+ return false;
}
info->name[29] = '\0';
- return 1;
+ return true;
}
static void
nf_ct_l3proto_module_put(match->family);
}
-static struct xt_match xt_helper_match[] = {
+static struct xt_match xt_helper_match[] __read_mostly = {
{
.name = "helper",
.family = AF_INET,
MODULE_ALIAS("ipt_length");
MODULE_ALIAS("ip6t_length");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_length_info *info = matchinfo;
u_int16_t pktlen = ntohs(ip_hdr(skb)->tot_len);
return (pktlen >= info->min && pktlen <= info->max) ^ info->invert;
}
-static int
+static bool
match6(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_length_info *info = matchinfo;
- const u_int16_t pktlen = (ntohs(ipv6_hdr(skb)->payload_len) +
- sizeof(struct ipv6hdr));
+ const u_int16_t pktlen = ntohs(ipv6_hdr(skb)->payload_len) +
+ sizeof(struct ipv6hdr);
return (pktlen >= info->min && pktlen <= info->max) ^ info->invert;
}
-static struct xt_match xt_length_match[] = {
+static struct xt_match xt_length_match[] __read_mostly = {
{
.name = "length",
.family = AF_INET,
#define CREDITS_PER_JIFFY POW2_BELOW32(MAX_CPJ)
-static int
+static bool
ipt_limit_match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
- struct xt_rateinfo *r = ((struct xt_rateinfo *)matchinfo)->master;
+ struct xt_rateinfo *r =
+ ((const struct xt_rateinfo *)matchinfo)->master;
unsigned long now = jiffies;
spin_lock_bh(&limit_lock);
/* We're not limited. */
r->credit -= r->cost;
spin_unlock_bh(&limit_lock);
- return 1;
+ return true;
}
spin_unlock_bh(&limit_lock);
- return 0;
+ return false;
}
/* Precision saver. */
return (user * HZ * CREDITS_PER_JIFFY) / XT_LIMIT_SCALE;
}
-static int
+static bool
ipt_limit_checkentry(const char *tablename,
const void *inf,
const struct xt_match *match,
|| user2credits(r->avg * r->burst) < user2credits(r->avg)) {
printk("Overflow in xt_limit, try lower: %u/%u\n",
r->avg, r->burst);
- return 0;
+ return false;
}
/* For SMP, we only want to use one set of counters. */
r->credit_cap = user2credits(r->avg * r->burst); /* Credits full. */
r->cost = user2credits(r->avg);
}
- return 1;
+ return true;
}
#ifdef CONFIG_COMPAT
* master pointer, which does not need to be preserved. */
static void compat_from_user(void *dst, void *src)
{
- struct compat_xt_rateinfo *cm = src;
+ const struct compat_xt_rateinfo *cm = src;
struct xt_rateinfo m = {
.avg = cm->avg,
.burst = cm->burst,
static int compat_to_user(void __user *dst, void *src)
{
- struct xt_rateinfo *m = src;
+ const struct xt_rateinfo *m = src;
struct compat_xt_rateinfo cm = {
.avg = m->avg,
.burst = m->burst,
}
#endif /* CONFIG_COMPAT */
-static struct xt_match xt_limit_match[] = {
+static struct xt_match xt_limit_match[] __read_mostly = {
{
.name = "limit",
.family = AF_INET,
MODULE_ALIAS("ipt_mac");
MODULE_ALIAS("ip6t_mac");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_mac_info *info = matchinfo;
/* Is mac pointer valid? */
- return (skb_mac_header(skb) >= skb->head &&
- (skb_mac_header(skb) + ETH_HLEN) <= skb->data
- /* If so, compare... */
- && ((!compare_ether_addr(eth_hdr(skb)->h_source, info->srcaddr))
- ^ info->invert));
+ return skb_mac_header(skb) >= skb->head &&
+ skb_mac_header(skb) + ETH_HLEN <= skb->data
+ /* If so, compare... */
+ && ((!compare_ether_addr(eth_hdr(skb)->h_source, info->srcaddr))
+ ^ info->invert);
}
-static struct xt_match xt_mac_match[] = {
+static struct xt_match xt_mac_match[] __read_mostly = {
{
.name = "mac",
.family = AF_INET,
MODULE_ALIAS("ipt_mark");
MODULE_ALIAS("ip6t_mark");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_mark_info *info = matchinfo;
return ((skb->mark & info->mask) == info->mark) ^ info->invert;
}
-static int
+static bool
checkentry(const char *tablename,
const void *entry,
const struct xt_match *match,
if (minfo->mark > 0xffffffff || minfo->mask > 0xffffffff) {
printk(KERN_WARNING "mark: only supports 32bit mark\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
#ifdef CONFIG_COMPAT
static void compat_from_user(void *dst, void *src)
{
- struct compat_xt_mark_info *cm = src;
+ const struct compat_xt_mark_info *cm = src;
struct xt_mark_info m = {
.mark = cm->mark,
.mask = cm->mask,
static int compat_to_user(void __user *dst, void *src)
{
- struct xt_mark_info *m = src;
+ const struct xt_mark_info *m = src;
struct compat_xt_mark_info cm = {
.mark = m->mark,
.mask = m->mask,
}
#endif /* CONFIG_COMPAT */
-static struct xt_match xt_mark_match[] = {
+static struct xt_match xt_mark_match[] __read_mostly = {
{
.name = "mark",
.family = AF_INET,
#endif
/* Returns 1 if the port is matched by the test, 0 otherwise. */
-static inline int
+static inline bool
ports_match(const u_int16_t *portlist, enum xt_multiport_flags flags,
u_int8_t count, u_int16_t src, u_int16_t dst)
{
unsigned int i;
for (i = 0; i < count; i++) {
if (flags != XT_MULTIPORT_DESTINATION && portlist[i] == src)
- return 1;
+ return true;
if (flags != XT_MULTIPORT_SOURCE && portlist[i] == dst)
- return 1;
+ return true;
}
- return 0;
+ return false;
}
/* Returns 1 if the port is matched by the test, 0 otherwise. */
-static inline int
+static inline bool
ports_match_v1(const struct xt_multiport_v1 *minfo,
u_int16_t src, u_int16_t dst)
{
if (minfo->flags == XT_MULTIPORT_SOURCE
&& src >= s && src <= e)
- return 1 ^ minfo->invert;
+ return true ^ minfo->invert;
if (minfo->flags == XT_MULTIPORT_DESTINATION
&& dst >= s && dst <= e)
- return 1 ^ minfo->invert;
+ return true ^ minfo->invert;
if (minfo->flags == XT_MULTIPORT_EITHER
&& ((dst >= s && dst <= e)
|| (src >= s && src <= e)))
- return 1 ^ minfo->invert;
+ return true ^ minfo->invert;
} else {
/* exact port matching */
duprintf("src or dst matches with %d?\n", s);
if (minfo->flags == XT_MULTIPORT_SOURCE
&& src == s)
- return 1 ^ minfo->invert;
+ return true ^ minfo->invert;
if (minfo->flags == XT_MULTIPORT_DESTINATION
&& dst == s)
- return 1 ^ minfo->invert;
+ return true ^ minfo->invert;
if (minfo->flags == XT_MULTIPORT_EITHER
&& (src == s || dst == s))
- return 1 ^ minfo->invert;
+ return true ^ minfo->invert;
}
}
return minfo->invert;
}
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
__be16 _ports[2], *pptr;
const struct xt_multiport *multiinfo = matchinfo;
if (offset)
- return 0;
+ return false;
pptr = skb_header_pointer(skb, protoff, sizeof(_ports), _ports);
if (pptr == NULL) {
* can't. Hence, no choice but to drop.
*/
duprintf("xt_multiport: Dropping evil offset=0 tinygram.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
return ports_match(multiinfo->ports,
ntohs(pptr[0]), ntohs(pptr[1]));
}
-static int
+static bool
match_v1(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
__be16 _ports[2], *pptr;
const struct xt_multiport_v1 *multiinfo = matchinfo;
if (offset)
- return 0;
+ return false;
pptr = skb_header_pointer(skb, protoff, sizeof(_ports), _ports);
if (pptr == NULL) {
* can't. Hence, no choice but to drop.
*/
duprintf("xt_multiport: Dropping evil offset=0 tinygram.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
return ports_match_v1(multiinfo, ntohs(pptr[0]), ntohs(pptr[1]));
}
-static inline int
+static inline bool
check(u_int16_t proto,
u_int8_t ip_invflags,
u_int8_t match_flags,
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
checkentry(const char *tablename,
const void *info,
const struct xt_match *match,
multiinfo->count);
}
-static int
+static bool
checkentry_v1(const char *tablename,
const void *info,
const struct xt_match *match,
multiinfo->count);
}
-static int
+static bool
checkentry6(const char *tablename,
const void *info,
const struct xt_match *match,
multiinfo->count);
}
-static int
+static bool
checkentry6_v1(const char *tablename,
const void *info,
const struct xt_match *match,
multiinfo->count);
}
-static struct xt_match xt_multiport_match[] = {
+static struct xt_match xt_multiport_match[] __read_mostly = {
{
.name = "multiport",
.family = AF_INET,
#include <linux/netfilter/xt_physdev.h>
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter_bridge.h>
-#define MATCH 1
-#define NOMATCH 0
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Bart De Schuymer <bdschuym@pandora.be>");
MODULE_ALIAS("ipt_physdev");
MODULE_ALIAS("ip6t_physdev");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
int i;
static const char nulldevname[IFNAMSIZ];
const struct xt_physdev_info *info = matchinfo;
- unsigned int ret;
+ bool ret;
const char *indev, *outdev;
- struct nf_bridge_info *nf_bridge;
+ const struct nf_bridge_info *nf_bridge;
/* Not a bridged IP packet or no info available yet:
* LOCAL_OUT/mangle and LOCAL_OUT/nat don't know if
/* Return MATCH if the invert flags of the used options are on */
if ((info->bitmask & XT_PHYSDEV_OP_BRIDGED) &&
!(info->invert & XT_PHYSDEV_OP_BRIDGED))
- return NOMATCH;
+ return false;
if ((info->bitmask & XT_PHYSDEV_OP_ISIN) &&
!(info->invert & XT_PHYSDEV_OP_ISIN))
- return NOMATCH;
+ return false;
if ((info->bitmask & XT_PHYSDEV_OP_ISOUT) &&
!(info->invert & XT_PHYSDEV_OP_ISOUT))
- return NOMATCH;
+ return false;
if ((info->bitmask & XT_PHYSDEV_OP_IN) &&
!(info->invert & XT_PHYSDEV_OP_IN))
- return NOMATCH;
+ return false;
if ((info->bitmask & XT_PHYSDEV_OP_OUT) &&
!(info->invert & XT_PHYSDEV_OP_OUT))
- return NOMATCH;
- return MATCH;
+ return false;
+ return true;
}
/* This only makes sense in the FORWARD and POSTROUTING chains */
if ((info->bitmask & XT_PHYSDEV_OP_BRIDGED) &&
(!!(nf_bridge->mask & BRNF_BRIDGED) ^
!(info->invert & XT_PHYSDEV_OP_BRIDGED)))
- return NOMATCH;
+ return false;
if ((info->bitmask & XT_PHYSDEV_OP_ISIN &&
(!nf_bridge->physindev ^ !!(info->invert & XT_PHYSDEV_OP_ISIN))) ||
(info->bitmask & XT_PHYSDEV_OP_ISOUT &&
(!nf_bridge->physoutdev ^ !!(info->invert & XT_PHYSDEV_OP_ISOUT))))
- return NOMATCH;
+ return false;
if (!(info->bitmask & XT_PHYSDEV_OP_IN))
goto match_outdev;
indev = nf_bridge->physindev ? nf_bridge->physindev->name : nulldevname;
- for (i = 0, ret = 0; i < IFNAMSIZ/sizeof(unsigned int); i++) {
+ for (i = 0, ret = false; i < IFNAMSIZ/sizeof(unsigned int); i++) {
ret |= (((const unsigned int *)indev)[i]
^ ((const unsigned int *)info->physindev)[i])
& ((const unsigned int *)info->in_mask)[i];
}
- if ((ret == 0) ^ !(info->invert & XT_PHYSDEV_OP_IN))
- return NOMATCH;
+ if (!ret ^ !(info->invert & XT_PHYSDEV_OP_IN))
+ return false;
match_outdev:
if (!(info->bitmask & XT_PHYSDEV_OP_OUT))
- return MATCH;
+ return true;
outdev = nf_bridge->physoutdev ?
nf_bridge->physoutdev->name : nulldevname;
- for (i = 0, ret = 0; i < IFNAMSIZ/sizeof(unsigned int); i++) {
+ for (i = 0, ret = false; i < IFNAMSIZ/sizeof(unsigned int); i++) {
ret |= (((const unsigned int *)outdev)[i]
^ ((const unsigned int *)info->physoutdev)[i])
& ((const unsigned int *)info->out_mask)[i];
}
- return (ret != 0) ^ !(info->invert & XT_PHYSDEV_OP_OUT);
+ return ret ^ !(info->invert & XT_PHYSDEV_OP_OUT);
}
-static int
+static bool
checkentry(const char *tablename,
const void *ip,
const struct xt_match *match,
if (!(info->bitmask & XT_PHYSDEV_OP_MASK) ||
info->bitmask & ~XT_PHYSDEV_OP_MASK)
- return 0;
+ return false;
if (info->bitmask & XT_PHYSDEV_OP_OUT &&
(!(info->bitmask & XT_PHYSDEV_OP_BRIDGED) ||
info->invert & XT_PHYSDEV_OP_BRIDGED) &&
"OUTPUT, FORWARD and POSTROUTING chains for non-bridged "
"traffic is not supported anymore.\n");
if (hook_mask & (1 << NF_IP_LOCAL_OUT))
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match xt_physdev_match[] = {
+static struct xt_match xt_physdev_match[] __read_mostly = {
{
.name = "physdev",
.family = AF_INET,
MODULE_ALIAS("ipt_pkttype");
MODULE_ALIAS("ip6t_pkttype");
-static int match(const struct sk_buff *skb,
+static bool match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const struct xt_match *match,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
u_int8_t type;
const struct xt_pkttype_info *info = matchinfo;
if (skb->pkt_type == PACKET_LOOPBACK)
- type = (MULTICAST(ip_hdr(skb)->daddr)
+ type = MULTICAST(ip_hdr(skb)->daddr)
? PACKET_MULTICAST
- : PACKET_BROADCAST);
+ : PACKET_BROADCAST;
else
type = skb->pkt_type;
return (type == info->pkttype) ^ info->invert;
}
-static struct xt_match xt_pkttype_match[] = {
+static struct xt_match xt_pkttype_match[] __read_mostly = {
{
.name = "pkttype",
.family = AF_INET,
MODULE_DESCRIPTION("Xtables IPsec policy matching module");
MODULE_LICENSE("GPL");
-static inline int
+static inline bool
xt_addr_cmp(const union xt_policy_addr *a1, const union xt_policy_addr *m,
const union xt_policy_addr *a2, unsigned short family)
{
case AF_INET6:
return !ipv6_masked_addr_cmp(&a1->a6, &m->a6, &a2->a6);
}
- return 0;
+ return false;
}
-static inline int
-match_xfrm_state(struct xfrm_state *x, const struct xt_policy_elem *e,
+static inline bool
+match_xfrm_state(const struct xfrm_state *x, const struct xt_policy_elem *e,
unsigned short family)
{
#define MATCH_ADDR(x,y,z) (!e->match.x || \
unsigned short family)
{
const struct xt_policy_elem *e;
- struct sec_path *sp = skb->sp;
+ const struct sec_path *sp = skb->sp;
int strict = info->flags & XT_POLICY_MATCH_STRICT;
int i, pos;
unsigned short family)
{
const struct xt_policy_elem *e;
- struct dst_entry *dst = skb->dst;
+ const struct dst_entry *dst = skb->dst;
int strict = info->flags & XT_POLICY_MATCH_STRICT;
int i, pos;
return strict ? i == info->len : 0;
}
-static int match(const struct sk_buff *skb,
- const struct net_device *in,
- const struct net_device *out,
- const struct xt_match *match,
- const void *matchinfo,
- int offset,
- unsigned int protoff,
- int *hotdrop)
+static bool match(const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ const struct xt_match *match,
+ const void *matchinfo,
+ int offset,
+ unsigned int protoff,
+ bool *hotdrop)
{
const struct xt_policy_info *info = matchinfo;
int ret;
ret = match_policy_out(skb, info, match->family);
if (ret < 0)
- ret = info->flags & XT_POLICY_MATCH_NONE ? 1 : 0;
+ ret = info->flags & XT_POLICY_MATCH_NONE ? true : false;
else if (info->flags & XT_POLICY_MATCH_NONE)
- ret = 0;
+ ret = false;
return ret;
}
-static int checkentry(const char *tablename, const void *ip_void,
- const struct xt_match *match,
- void *matchinfo, unsigned int hook_mask)
+static bool checkentry(const char *tablename, const void *ip_void,
+ const struct xt_match *match,
+ void *matchinfo, unsigned int hook_mask)
{
struct xt_policy_info *info = matchinfo;
if (!(info->flags & (XT_POLICY_MATCH_IN|XT_POLICY_MATCH_OUT))) {
printk(KERN_ERR "xt_policy: neither incoming nor "
"outgoing policy selected\n");
- return 0;
+ return false;
}
/* hook values are equal for IPv4 and IPv6 */
if (hook_mask & (1 << NF_IP_PRE_ROUTING | 1 << NF_IP_LOCAL_IN)
&& info->flags & XT_POLICY_MATCH_OUT) {
printk(KERN_ERR "xt_policy: output policy not valid in "
"PRE_ROUTING and INPUT\n");
- return 0;
+ return false;
}
if (hook_mask & (1 << NF_IP_POST_ROUTING | 1 << NF_IP_LOCAL_OUT)
&& info->flags & XT_POLICY_MATCH_IN) {
printk(KERN_ERR "xt_policy: input policy not valid in "
"POST_ROUTING and OUTPUT\n");
- return 0;
+ return false;
}
if (info->len > XT_POLICY_MAX_ELEM) {
printk(KERN_ERR "xt_policy: too many policy elements\n");
- return 0;
+ return false;
}
- return 1;
+ return true;
}
-static struct xt_match xt_policy_match[] = {
+static struct xt_match xt_policy_match[] __read_mostly = {
{
.name = "policy",
.family = AF_INET,
static DEFINE_SPINLOCK(quota_lock);
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in, const struct net_device *out,
const struct xt_match *match, const void *matchinfo,
- int offset, unsigned int protoff, int *hotdrop)
+ int offset, unsigned int protoff, bool *hotdrop)
{
- struct xt_quota_info *q = ((struct xt_quota_info *)matchinfo)->master;
- int ret = q->flags & XT_QUOTA_INVERT ? 1 : 0;
+ struct xt_quota_info *q =
+ ((const struct xt_quota_info *)matchinfo)->master;
+ bool ret = q->flags & XT_QUOTA_INVERT;
spin_lock_bh("a_lock);
if (q->quota >= skb->len) {
q->quota -= skb->len;
- ret ^= 1;
+ ret = !ret;
} else {
/* we do not allow even small packets from now on */
q->quota = 0;
return ret;
}
-static int
+static bool
checkentry(const char *tablename, const void *entry,
const struct xt_match *match, void *matchinfo,
unsigned int hook_mask)
{
- struct xt_quota_info *q = (struct xt_quota_info *)matchinfo;
+ struct xt_quota_info *q = matchinfo;
if (q->flags & ~XT_QUOTA_MASK)
- return 0;
+ return false;
/* For SMP, we only want to use one set of counters. */
q->master = q;
- return 1;
+ return true;
}
-static struct xt_match xt_quota_match[] = {
+static struct xt_match xt_quota_match[] __read_mostly = {
{
.name = "quota",
.family = AF_INET,
MODULE_DESCRIPTION("X_tables realm match");
MODULE_ALIAS("ipt_realm");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_realm_info *info = matchinfo;
- struct dst_entry *dst = skb->dst;
+ const struct dst_entry *dst = skb->dst;
return (info->id == (dst->tclassid & info->mask)) ^ info->invert;
}
-static struct xt_match realm_match = {
+static struct xt_match realm_match __read_mostly = {
.name = "realm",
.match = match,
.matchsize = sizeof(struct xt_realm_info),
#define SCCHECK(cond, option, flag, invflag) (!((flag) & (option)) \
|| (!!((invflag) & (option)) ^ (cond)))
-static int
+static bool
match_flags(const struct xt_sctp_flag_info *flag_info,
const int flag_count,
u_int8_t chunktype,
{
int i;
- for (i = 0; i < flag_count; i++) {
- if (flag_info[i].chunktype == chunktype) {
+ for (i = 0; i < flag_count; i++)
+ if (flag_info[i].chunktype == chunktype)
return (chunkflags & flag_info[i].flag_mask) == flag_info[i].flag;
- }
- }
- return 1;
+ return true;
}
-static inline int
+static inline bool
match_packet(const struct sk_buff *skb,
unsigned int offset,
const u_int32_t *chunkmap,
int chunk_match_type,
const struct xt_sctp_flag_info *flag_info,
const int flag_count,
- int *hotdrop)
+ bool *hotdrop)
{
u_int32_t chunkmapcopy[256 / sizeof (u_int32_t)];
sctp_chunkhdr_t _sch, *sch;
int i = 0;
#endif
- if (chunk_match_type == SCTP_CHUNK_MATCH_ALL) {
+ if (chunk_match_type == SCTP_CHUNK_MATCH_ALL)
SCTP_CHUNKMAP_COPY(chunkmapcopy, chunkmap);
- }
do {
sch = skb_header_pointer(skb, offset, sizeof(_sch), &_sch);
if (sch == NULL || sch->length == 0) {
duprintf("Dropping invalid SCTP packet.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
duprintf("Chunk num: %d\toffset: %d\ttype: %d\tlength: %d\tflags: %x\n",
case SCTP_CHUNK_MATCH_ANY:
if (match_flags(flag_info, flag_count,
sch->type, sch->flags)) {
- return 1;
+ return true;
}
break;
case SCTP_CHUNK_MATCH_ALL:
if (match_flags(flag_info, flag_count,
- sch->type, sch->flags)) {
+ sch->type, sch->flags))
SCTP_CHUNKMAP_CLEAR(chunkmapcopy, sch->type);
- }
break;
case SCTP_CHUNK_MATCH_ONLY:
if (!match_flags(flag_info, flag_count,
- sch->type, sch->flags)) {
- return 0;
- }
+ sch->type, sch->flags))
+ return false;
break;
}
} else {
switch (chunk_match_type) {
case SCTP_CHUNK_MATCH_ONLY:
- return 0;
+ return false;
}
}
} while (offset < skb->len);
case SCTP_CHUNK_MATCH_ALL:
return SCTP_CHUNKMAP_IS_CLEAR(chunkmap);
case SCTP_CHUNK_MATCH_ANY:
- return 0;
+ return false;
case SCTP_CHUNK_MATCH_ONLY:
- return 1;
+ return true;
}
/* This will never be reached, but required to stop compiler whine */
- return 0;
+ return false;
}
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_sctp_info *info = matchinfo;
sctp_sctphdr_t _sh, *sh;
if (offset) {
duprintf("Dropping non-first fragment.. FIXME\n");
- return 0;
+ return false;
}
sh = skb_header_pointer(skb, protoff, sizeof(_sh), &_sh);
if (sh == NULL) {
duprintf("Dropping evil TCP offset=0 tinygram.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
duprintf("spt: %d\tdpt: %d\n", ntohs(sh->source), ntohs(sh->dest));
- return SCCHECK(((ntohs(sh->source) >= info->spts[0])
- && (ntohs(sh->source) <= info->spts[1])),
+ return SCCHECK(ntohs(sh->source) >= info->spts[0]
+ && ntohs(sh->source) <= info->spts[1],
XT_SCTP_SRC_PORTS, info->flags, info->invflags)
- && SCCHECK(((ntohs(sh->dest) >= info->dpts[0])
- && (ntohs(sh->dest) <= info->dpts[1])),
+ && SCCHECK(ntohs(sh->dest) >= info->dpts[0]
+ && ntohs(sh->dest) <= info->dpts[1],
XT_SCTP_DEST_PORTS, info->flags, info->invflags)
&& SCCHECK(match_packet(skb, protoff + sizeof (sctp_sctphdr_t),
info->chunkmap, info->chunk_match_type,
XT_SCTP_CHUNK_TYPES, info->flags, info->invflags);
}
-static int
+static bool
checkentry(const char *tablename,
const void *inf,
const struct xt_match *match,
| SCTP_CHUNK_MATCH_ONLY)));
}
-static struct xt_match xt_sctp_match[] = {
+static struct xt_match xt_sctp_match[] __read_mostly = {
{
.name = "sctp",
.family = AF_INET,
MODULE_ALIAS("ipt_state");
MODULE_ALIAS("ip6t_state");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_state_info *sinfo = matchinfo;
enum ip_conntrack_info ctinfo;
return (sinfo->statemask & statebit);
}
-static int check(const char *tablename,
- const void *inf,
- const struct xt_match *match,
- void *matchinfo,
- unsigned int hook_mask)
+static bool check(const char *tablename,
+ const void *inf,
+ const struct xt_match *match,
+ void *matchinfo,
+ unsigned int hook_mask)
{
if (nf_ct_l3proto_try_module_get(match->family) < 0) {
printk(KERN_WARNING "can't load conntrack support for "
"proto=%d\n", match->family);
- return 0;
+ return false;
}
- return 1;
+ return true;
}
static void
nf_ct_l3proto_module_put(match->family);
}
-static struct xt_match xt_state_match[] = {
+static struct xt_match xt_state_match[] __read_mostly = {
{
.name = "state",
.family = AF_INET,
static DEFINE_SPINLOCK(nth_lock);
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in, const struct net_device *out,
const struct xt_match *match, const void *matchinfo,
- int offset, unsigned int protoff, int *hotdrop)
+ int offset, unsigned int protoff, bool *hotdrop)
{
struct xt_statistic_info *info = (struct xt_statistic_info *)matchinfo;
- int ret = info->flags & XT_STATISTIC_INVERT ? 1 : 0;
+ bool ret = info->flags & XT_STATISTIC_INVERT;
switch (info->mode) {
case XT_STATISTIC_MODE_RANDOM:
if ((net_random() & 0x7FFFFFFF) < info->u.random.probability)
- ret ^= 1;
+ ret = !ret;
break;
case XT_STATISTIC_MODE_NTH:
info = info->master;
spin_lock_bh(&nth_lock);
if (info->u.nth.count++ == info->u.nth.every) {
info->u.nth.count = 0;
- ret ^= 1;
+ ret = !ret;
}
spin_unlock_bh(&nth_lock);
break;
return ret;
}
-static int
+static bool
checkentry(const char *tablename, const void *entry,
const struct xt_match *match, void *matchinfo,
unsigned int hook_mask)
{
- struct xt_statistic_info *info = (struct xt_statistic_info *)matchinfo;
+ struct xt_statistic_info *info = matchinfo;
if (info->mode > XT_STATISTIC_MODE_MAX ||
info->flags & ~XT_STATISTIC_MASK)
- return 0;
+ return false;
info->master = info;
- return 1;
+ return true;
}
-static struct xt_match xt_statistic_match[] = {
+static struct xt_match xt_statistic_match[] __read_mostly = {
{
.name = "statistic",
.family = AF_INET,
MODULE_ALIAS("ipt_string");
MODULE_ALIAS("ip6t_string");
-static int match(const struct sk_buff *skb,
- const struct net_device *in,
- const struct net_device *out,
- const struct xt_match *match,
- const void *matchinfo,
- int offset,
- unsigned int protoff,
- int *hotdrop)
+static bool match(const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ const struct xt_match *match,
+ const void *matchinfo,
+ int offset,
+ unsigned int protoff,
+ bool *hotdrop)
{
const struct xt_string_info *conf = matchinfo;
struct ts_state state;
#define STRING_TEXT_PRIV(m) ((struct xt_string_info *) m)
-static int checkentry(const char *tablename,
- const void *ip,
- const struct xt_match *match,
- void *matchinfo,
- unsigned int hook_mask)
+static bool checkentry(const char *tablename,
+ const void *ip,
+ const struct xt_match *match,
+ void *matchinfo,
+ unsigned int hook_mask)
{
struct xt_string_info *conf = matchinfo;
struct ts_config *ts_conf;
/* Damn, can't handle this case properly with iptables... */
if (conf->from_offset > conf->to_offset)
- return 0;
+ return false;
if (conf->algo[XT_STRING_MAX_ALGO_NAME_SIZE - 1] != '\0')
- return 0;
+ return false;
if (conf->patlen > XT_STRING_MAX_PATTERN_SIZE)
- return 0;
+ return false;
ts_conf = textsearch_prepare(conf->algo, conf->pattern, conf->patlen,
GFP_KERNEL, TS_AUTOLOAD);
if (IS_ERR(ts_conf))
- return 0;
+ return false;
conf->config = ts_conf;
- return 1;
+ return true;
}
static void destroy(const struct xt_match *match, void *matchinfo)
textsearch_destroy(STRING_TEXT_PRIV(matchinfo)->config);
}
-static struct xt_match xt_string_match[] = {
+static struct xt_match xt_string_match[] __read_mostly = {
{
.name = "string",
.family = AF_INET,
MODULE_DESCRIPTION("iptables TCP MSS match module");
MODULE_ALIAS("ipt_tcpmss");
-static int
+static bool
match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
const struct xt_tcpmss_match_info *info = matchinfo;
struct tcphdr _tcph, *th;
return info->invert;
dropit:
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
-static struct xt_match xt_tcpmss_match[] = {
+static struct xt_match xt_tcpmss_match[] __read_mostly = {
{
.name = "tcpmss",
.family = AF_INET,
/* Returns 1 if the port is matched by the range, 0 otherwise */
-static inline int
-port_match(u_int16_t min, u_int16_t max, u_int16_t port, int invert)
+static inline bool
+port_match(u_int16_t min, u_int16_t max, u_int16_t port, bool invert)
{
- int ret;
-
- ret = (port >= min && port <= max) ^ invert;
- return ret;
+ return (port >= min && port <= max) ^ invert;
}
-static int
+static bool
tcp_find_option(u_int8_t option,
const struct sk_buff *skb,
unsigned int protoff,
unsigned int optlen,
- int invert,
- int *hotdrop)
+ bool invert,
+ bool *hotdrop)
{
/* tcp.doff is only 4 bits, ie. max 15 * 4 bytes */
u_int8_t _opt[60 - sizeof(struct tcphdr)], *op;
op = skb_header_pointer(skb, protoff + sizeof(struct tcphdr),
optlen, _opt);
if (op == NULL) {
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
for (i = 0; i < optlen; ) {
return invert;
}
-static int
+static bool
tcp_match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
struct tcphdr _tcph, *th;
const struct xt_tcp *tcpinfo = matchinfo;
*/
if (offset == 1) {
duprintf("Dropping evil TCP offset=1 frag.\n");
- *hotdrop = 1;
+ *hotdrop = true;
}
/* Must not be a fragment. */
- return 0;
+ return false;
}
-#define FWINVTCP(bool,invflg) ((bool) ^ !!(tcpinfo->invflags & invflg))
+#define FWINVTCP(bool, invflg) ((bool) ^ !!(tcpinfo->invflags & (invflg)))
th = skb_header_pointer(skb, protoff, sizeof(_tcph), &_tcph);
if (th == NULL) {
/* We've been asked to examine this packet, and we
can't. Hence, no choice but to drop. */
duprintf("Dropping evil TCP offset=0 tinygram.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
if (!port_match(tcpinfo->spts[0], tcpinfo->spts[1],
ntohs(th->source),
!!(tcpinfo->invflags & XT_TCP_INV_SRCPT)))
- return 0;
+ return false;
if (!port_match(tcpinfo->dpts[0], tcpinfo->dpts[1],
ntohs(th->dest),
!!(tcpinfo->invflags & XT_TCP_INV_DSTPT)))
- return 0;
+ return false;
if (!FWINVTCP((((unsigned char *)th)[13] & tcpinfo->flg_mask)
== tcpinfo->flg_cmp,
XT_TCP_INV_FLAGS))
- return 0;
+ return false;
if (tcpinfo->option) {
if (th->doff * 4 < sizeof(_tcph)) {
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
if (!tcp_find_option(tcpinfo->option, skb, protoff,
th->doff*4 - sizeof(_tcph),
tcpinfo->invflags & XT_TCP_INV_OPTION,
hotdrop))
- return 0;
+ return false;
}
- return 1;
+ return true;
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
tcp_checkentry(const char *tablename,
const void *info,
const struct xt_match *match,
return !(tcpinfo->invflags & ~XT_TCP_INV_MASK);
}
-static int
+static bool
udp_match(const struct sk_buff *skb,
const struct net_device *in,
const struct net_device *out,
const void *matchinfo,
int offset,
unsigned int protoff,
- int *hotdrop)
+ bool *hotdrop)
{
struct udphdr _udph, *uh;
const struct xt_udp *udpinfo = matchinfo;
/* Must not be a fragment. */
if (offset)
- return 0;
+ return false;
uh = skb_header_pointer(skb, protoff, sizeof(_udph), &_udph);
if (uh == NULL) {
/* We've been asked to examine this packet, and we
can't. Hence, no choice but to drop. */
duprintf("Dropping evil UDP tinygram.\n");
- *hotdrop = 1;
- return 0;
+ *hotdrop = true;
+ return false;
}
return port_match(udpinfo->spts[0], udpinfo->spts[1],
}
/* Called when user tries to insert an entry of this type. */
-static int
+static bool
udp_checkentry(const char *tablename,
const void *info,
const struct xt_match *match,
return !(udpinfo->invflags & ~XT_UDP_INV_MASK);
}
-static struct xt_match xt_tcpudp_match[] = {
+static struct xt_match xt_tcpudp_match[] __read_mostly = {
{
.name = "tcp",
.family = AF_INET,
--- /dev/null
+/*
+ * xt_u32 - kernel module to match u32 packet content
+ *
+ * Original author: Don Cohen <don@isis.cs3-inc.com>
+ * © Jan Engelhardt <jengelh@gmx.de>, 2007
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/spinlock.h>
+#include <linux/skbuff.h>
+#include <linux/types.h>
+#include <linux/netfilter/x_tables.h>
+#include <linux/netfilter/xt_u32.h>
+
+static bool u32_match_it(const struct xt_u32 *data,
+ const struct sk_buff *skb)
+{
+ const struct xt_u32_test *ct;
+ unsigned int testind;
+ unsigned int nnums;
+ unsigned int nvals;
+ unsigned int i;
+ u_int32_t pos;
+ u_int32_t val;
+ u_int32_t at;
+ int ret;
+
+ /*
+ * Small example: "0 >> 28 == 4 && 8 & 0xFF0000 >> 16 = 6, 17"
+ * (=IPv4 and (TCP or UDP)). Outer loop runs over the "&&" operands.
+ */
+ for (testind = 0; testind < data->ntests; ++testind) {
+ ct = &data->tests[testind];
+ at = 0;
+ pos = ct->location[0].number;
+
+ if (skb->len < 4 || pos > skb->len - 4);
+ return false;
+
+ ret = skb_copy_bits(skb, pos, &val, sizeof(val));
+ BUG_ON(ret < 0);
+ val = ntohl(val);
+ nnums = ct->nnums;
+
+ /* Inner loop runs over "&", "<<", ">>" and "@" operands */
+ for (i = 1; i < nnums; ++i) {
+ u_int32_t number = ct->location[i].number;
+ switch (ct->location[i].nextop) {
+ case XT_U32_AND:
+ val &= number;
+ break;
+ case XT_U32_LEFTSH:
+ val <<= number;
+ break;
+ case XT_U32_RIGHTSH:
+ val >>= number;
+ break;
+ case XT_U32_AT:
+ if (at + val < at)
+ return false;
+ at += val;
+ pos = number;
+ if (at + 4 < at || skb->len < at + 4 ||
+ pos > skb->len - at - 4)
+ return false;
+
+ ret = skb_copy_bits(skb, at + pos, &val,
+ sizeof(val));
+ BUG_ON(ret < 0);
+ val = ntohl(val);
+ break;
+ }
+ }
+
+ /* Run over the "," and ":" operands */
+ nvals = ct->nvalues;
+ for (i = 0; i < nvals; ++i)
+ if (ct->value[i].min <= val && val <= ct->value[i].max)
+ break;
+
+ if (i >= ct->nvalues)
+ return false;
+ }
+
+ return true;
+}
+
+static bool u32_match(const struct sk_buff *skb,
+ const struct net_device *in,
+ const struct net_device *out,
+ const struct xt_match *match, const void *matchinfo,
+ int offset, unsigned int protoff, bool *hotdrop)
+{
+ const struct xt_u32 *data = matchinfo;
+ bool ret;
+
+ ret = u32_match_it(data, skb);
+ return ret ^ data->invert;
+}
+
+static struct xt_match u32_reg[] __read_mostly = {
+ {
+ .name = "u32",
+ .family = AF_INET,
+ .match = u32_match,
+ .matchsize = sizeof(struct xt_u32),
+ .me = THIS_MODULE,
+ },
+ {
+ .name = "u32",
+ .family = AF_INET6,
+ .match = u32_match,
+ .matchsize = sizeof(struct xt_u32),
+ .me = THIS_MODULE,
+ },
+};
+
+static int __init xt_u32_init(void)
+{
+ return xt_register_matches(u32_reg, ARRAY_SIZE(u32_reg));
+}
+
+static void __exit xt_u32_exit(void)
+{
+ xt_unregister_matches(u32_reg, ARRAY_SIZE(u32_reg));
+}
+
+module_init(xt_u32_init);
+module_exit(xt_u32_exit);
+MODULE_AUTHOR("Jan Engelhardt <jengelh@gmx.de>");
+MODULE_DESCRIPTION("netfilter u32 match module");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("ipt_u32");
+MODULE_ALIAS("ip6t_u32");
return 0;
}
-static struct seq_operations netlink_seq_ops = {
+static const struct seq_operations netlink_seq_ops = {
.start = netlink_seq_start,
.next = netlink_seq_next,
.stop = netlink_seq_stop,
return -ERANGE;
break;
+ case NLA_NESTED_COMPAT:
+ if (attrlen < pt->len)
+ return -ERANGE;
+ if (attrlen < NLA_ALIGN(pt->len))
+ break;
+ if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN)
+ return -ERANGE;
+ nla = nla_data(nla) + NLA_ALIGN(pt->len);
+ if (attrlen < NLA_ALIGN(pt->len) + NLA_HDRLEN + nla_len(nla))
+ return -ERANGE;
+ break;
default:
if (pt->len)
minlen = pt->len;
return 0;
}
-static struct seq_operations nr_info_seqops = {
+static const struct seq_operations nr_info_seqops = {
.start = nr_info_start,
.next = nr_info_next,
.stop = nr_info_stop,
return 0;
}
-static struct seq_operations nr_node_seqops = {
+static const struct seq_operations nr_node_seqops = {
.start = nr_node_start,
.next = nr_node_next,
.stop = nr_node_stop,
return 0;
}
-static struct seq_operations nr_neigh_seqops = {
+static const struct seq_operations nr_neigh_seqops = {
.start = nr_neigh_start,
.next = nr_neigh_next,
.stop = nr_neigh_stop,
return 0;
}
-static struct seq_operations packet_seq_ops = {
+static const struct seq_operations packet_seq_ops = {
.start = packet_seq_start,
.next = packet_seq_next,
.stop = packet_seq_stop,
return 0;
}
-static struct seq_operations rose_info_seqops = {
+static const struct seq_operations rose_info_seqops = {
.start = rose_info_start,
.next = rose_info_next,
.stop = rose_info_stop,
return 0;
}
-static struct seq_operations rose_node_seqops = {
+static const struct seq_operations rose_node_seqops = {
.start = rose_node_start,
.next = rose_node_next,
.stop = rose_node_stop,
}
-static struct seq_operations rose_neigh_seqops = {
+static const struct seq_operations rose_neigh_seqops = {
.start = rose_neigh_start,
.next = rose_neigh_next,
.stop = rose_neigh_stop,
return 0;
}
-static struct seq_operations rose_route_seqops = {
+static const struct seq_operations rose_route_seqops = {
.start = rose_route_start,
.next = rose_route_next,
.stop = rose_route_stop,
*/
static void *rxrpc_call_seq_start(struct seq_file *seq, loff_t *_pos)
{
- struct list_head *_p;
- loff_t pos = *_pos;
-
read_lock(&rxrpc_call_lock);
- if (!pos)
- return SEQ_START_TOKEN;
- pos--;
-
- list_for_each(_p, &rxrpc_calls)
- if (!pos--)
- break;
-
- return _p != &rxrpc_calls ? _p : NULL;
+ return seq_list_start_head(&rxrpc_calls, *_pos);
}
static void *rxrpc_call_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
- struct list_head *_p;
-
- (*pos)++;
-
- _p = v;
- _p = (v == SEQ_START_TOKEN) ? rxrpc_calls.next : _p->next;
-
- return _p != &rxrpc_calls ? _p : NULL;
+ return seq_list_next(v, &rxrpc_calls, pos);
}
static void rxrpc_call_seq_stop(struct seq_file *seq, void *v)
struct rxrpc_call *call;
char lbuff[4 + 4 + 4 + 4 + 5 + 1], rbuff[4 + 4 + 4 + 4 + 5 + 1];
- if (v == SEQ_START_TOKEN) {
+ if (v == &rxrpc_calls) {
seq_puts(seq,
"Proto Local Remote "
" SvID ConnID CallID End Use State Abort "
return 0;
}
-static struct seq_operations rxrpc_call_seq_ops = {
+static const struct seq_operations rxrpc_call_seq_ops = {
.start = rxrpc_call_seq_start,
.next = rxrpc_call_seq_next,
.stop = rxrpc_call_seq_stop,
*/
static void *rxrpc_connection_seq_start(struct seq_file *seq, loff_t *_pos)
{
- struct list_head *_p;
- loff_t pos = *_pos;
-
read_lock(&rxrpc_connection_lock);
- if (!pos)
- return SEQ_START_TOKEN;
- pos--;
-
- list_for_each(_p, &rxrpc_connections)
- if (!pos--)
- break;
-
- return _p != &rxrpc_connections ? _p : NULL;
+ return seq_list_start_head(&rxrpc_connections, *_pos);
}
static void *rxrpc_connection_seq_next(struct seq_file *seq, void *v,
loff_t *pos)
{
- struct list_head *_p;
-
- (*pos)++;
-
- _p = v;
- _p = (v == SEQ_START_TOKEN) ? rxrpc_connections.next : _p->next;
-
- return _p != &rxrpc_connections ? _p : NULL;
+ return seq_list_next(v, &rxrpc_connections, pos);
}
static void rxrpc_connection_seq_stop(struct seq_file *seq, void *v)
struct rxrpc_transport *trans;
char lbuff[4 + 4 + 4 + 4 + 5 + 1], rbuff[4 + 4 + 4 + 4 + 5 + 1];
- if (v == SEQ_START_TOKEN) {
+ if (v == &rxrpc_connections) {
seq_puts(seq,
"Proto Local Remote "
" SvID ConnID Calls End Use State Key "
return 0;
}
-static struct seq_operations rxrpc_connection_seq_ops = {
+static const struct seq_operations rxrpc_connection_seq_ops = {
.start = rxrpc_connection_seq_start,
.next = rxrpc_connection_seq_next,
.stop = rxrpc_connection_seq_stop,
To compile this code as a module, choose M here: the
module will be called sch_prio.
+config NET_SCH_RR
+ tristate "Multi Band Round Robin Queuing (RR)"
+ select NET_SCH_PRIO
+ ---help---
+ Say Y here if you want to use an n-band round robin packet
+ scheduler.
+
+ The module uses sch_prio for its framework and is aliased as
+ sch_rr, so it will load sch_prio, although it is referred
+ to using sch_rr.
+
config NET_SCH_RED
tristate "Random Early Detection (RED)"
---help---
config NET_CLS_RSVP
tristate "IPv4 Resource Reservation Protocol (RSVP)"
select NET_CLS
- select NET_ESTIMATOR
---help---
The Resource Reservation Protocol (RSVP) permits end systems to
request a minimum and maximum data flow rate for a connection; this
config NET_CLS_RSVP6
tristate "IPv6 Resource Reservation Protocol (RSVP6)"
select NET_CLS
- select NET_ESTIMATOR
---help---
The Resource Reservation Protocol (RSVP) permits end systems to
request a minimum and maximum data flow rate for a connection; this
config NET_CLS_ACT
bool "Actions"
- select NET_ESTIMATOR
---help---
Say Y here if you want to use traffic control actions. Actions
get attached to classifiers and are invoked after a successful
config NET_CLS_POLICE
bool "Traffic Policing (obsolete)"
depends on NET_CLS_ACT!=y
- select NET_ESTIMATOR
---help---
Say Y here if you want to do traffic policing, i.e. strict
bandwidth limiting. This option is obsoleted by the traffic
classification based on the incoming device. This option is
likely to disappear in favour of the metadata ematch.
-config NET_ESTIMATOR
- bool "Rate estimator"
- ---help---
- Say Y here to allow using rate estimators to estimate the current
- rate-of-flow for network devices, queues, etc. This module is
- automatically selected if needed but can be selected manually for
- statistical purposes.
-
endif # NET_SCHED
endmenu
*
*/
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/kmod.h>
-#include <net/sock.h>
#include <net/sch_generic.h>
#include <net/act_api.h>
#include <net/netlink.h>
write_lock_bh(hinfo->lock);
*p1p = p->tcfc_next;
write_unlock_bh(hinfo->lock);
-#ifdef CONFIG_NET_ESTIMATOR
gen_kill_estimator(&p->tcfc_bstats,
&p->tcfc_rate_est);
-#endif
kfree(p);
return;
}
p->tcfc_bindcnt = 1;
spin_lock_init(&p->tcfc_lock);
- p->tcfc_stats_lock = &p->tcfc_lock;
p->tcfc_index = index ? index : tcf_hash_new_index(idx_gen, hinfo);
p->tcfc_tm.install = jiffies;
p->tcfc_tm.lastuse = jiffies;
-#ifdef CONFIG_NET_ESTIMATOR
if (est)
gen_new_estimator(&p->tcfc_bstats, &p->tcfc_rate_est,
- p->tcfc_stats_lock, est);
-#endif
+ &p->tcfc_lock, est);
a->priv = (void *) p;
return p;
}
if (compat_mode) {
if (a->type == TCA_OLD_COMPAT)
err = gnet_stats_start_copy_compat(skb, 0,
- TCA_STATS, TCA_XSTATS, h->tcf_stats_lock, &d);
+ TCA_STATS, TCA_XSTATS, &h->tcf_lock, &d);
else
return 0;
} else
err = gnet_stats_start_copy(skb, TCA_ACT_STATS,
- h->tcf_stats_lock, &d);
+ &h->tcf_lock, &d);
if (err < 0)
goto errout;
goto errout;
if (gnet_stats_copy_basic(&d, &h->tcf_bstats) < 0 ||
-#ifdef CONFIG_NET_ESTIMATOR
gnet_stats_copy_rate_est(&d, &h->tcf_rate_est) < 0 ||
-#endif
gnet_stats_copy_queue(&d, &h->tcf_qstats) < 0)
goto errout;
*
*/
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
#include <net/netlink.h>
-#include <net/sock.h>
#include <net/pkt_sched.h>
#include <linux/tc_act/tc_gact.h>
#include <net/tc_act/tc_gact.h>
* Copyright: Jamal Hadi Salim (2002-4)
*/
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
-#include <linux/kmod.h>
#include <net/netlink.h>
-#include <net/sock.h>
#include <net/pkt_sched.h>
#include <linux/tc_act/tc_ipt.h>
#include <net/tc_act/tc_ipt.h>
*
*/
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
#include <net/netlink.h>
-#include <net/sock.h>
#include <net/pkt_sched.h>
#include <linux/tc_act/tc_mirred.h>
#include <net/tc_act/tc_mirred.h>
-#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#define MIRRED_TAB_MASK 7
* Authors: Jamal Hadi Salim (2002-4)
*/
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <asm/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <linux/module.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
#include <net/netlink.h>
-#include <net/sock.h>
#include <net/pkt_sched.h>
#include <linux/tc_act/tc_pedit.h>
#include <net/tc_act/tc_pedit.h>
* J Hadi Salim (action changes)
*/
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/module.h>
#include <linux/rtnetlink.h>
#include <linux/init.h>
-#include <net/sock.h>
#include <net/act_api.h>
#include <net/netlink.h>
write_lock_bh(&police_lock);
*p1p = p->tcf_next;
write_unlock_bh(&police_lock);
-#ifdef CONFIG_NET_ESTIMATOR
gen_kill_estimator(&p->tcf_bstats,
&p->tcf_rate_est);
-#endif
if (p->tcfp_R_tab)
qdisc_put_rtab(p->tcfp_R_tab);
if (p->tcfp_P_tab)
ret = ACT_P_CREATED;
police->tcf_refcnt = 1;
spin_lock_init(&police->tcf_lock);
- police->tcf_stats_lock = &police->tcf_lock;
if (bind)
police->tcf_bindcnt = 1;
override:
police->tcfp_ptoks = L2T_P(police, police->tcfp_mtu);
police->tcf_action = parm->action;
-#ifdef CONFIG_NET_ESTIMATOR
if (tb[TCA_POLICE_AVRATE-1])
police->tcfp_ewma_rate =
*(u32*)RTA_DATA(tb[TCA_POLICE_AVRATE-1]);
if (est)
gen_replace_estimator(&police->tcf_bstats,
&police->tcf_rate_est,
- police->tcf_stats_lock, est);
-#endif
+ &police->tcf_lock, est);
spin_unlock_bh(&police->tcf_lock);
if (ret != ACT_P_CREATED)
police->tcf_bstats.bytes += skb->len;
police->tcf_bstats.packets++;
-#ifdef CONFIG_NET_ESTIMATOR
if (police->tcfp_ewma_rate &&
police->tcf_rate_est.bps >= police->tcfp_ewma_rate) {
police->tcf_qstats.overlimits++;
spin_unlock(&police->tcf_lock);
return police->tcf_action;
}
-#endif
if (skb->len <= police->tcfp_mtu) {
if (police->tcfp_R_tab == NULL) {
if (police->tcfp_result)
RTA_PUT(skb, TCA_POLICE_RESULT, sizeof(int),
&police->tcfp_result);
-#ifdef CONFIG_NET_ESTIMATOR
if (police->tcfp_ewma_rate)
RTA_PUT(skb, TCA_POLICE_AVRATE, 4, &police->tcfp_ewma_rate);
-#endif
return skb->len;
rtattr_failure:
police->tcf_refcnt = 1;
spin_lock_init(&police->tcf_lock);
- police->tcf_stats_lock = &police->tcf_lock;
if (parm->rate.rate) {
police->tcfp_R_tab =
qdisc_get_rtab(&parm->rate, tb[TCA_POLICE_RATE-1]);
goto failure;
police->tcfp_result = *(u32*)RTA_DATA(tb[TCA_POLICE_RESULT-1]);
}
-#ifdef CONFIG_NET_ESTIMATOR
if (tb[TCA_POLICE_AVRATE-1]) {
if (RTA_PAYLOAD(tb[TCA_POLICE_AVRATE-1]) != sizeof(u32))
goto failure;
police->tcfp_ewma_rate =
*(u32*)RTA_DATA(tb[TCA_POLICE_AVRATE-1]);
}
-#endif
police->tcfp_toks = police->tcfp_burst = parm->burst;
police->tcfp_mtu = parm->mtu;
if (police->tcfp_mtu == 0) {
police->tcf_index = parm->index ? parm->index :
tcf_police_new_index();
police->tcf_action = parm->action;
-#ifdef CONFIG_NET_ESTIMATOR
if (est)
gen_new_estimator(&police->tcf_bstats, &police->tcf_rate_est,
- police->tcf_stats_lock, est);
-#endif
+ &police->tcf_lock, est);
h = tcf_hash(police->tcf_index, POL_TAB_MASK);
write_lock_bh(&police_lock);
police->tcf_next = tcf_police_ht[h];
police->tcf_bstats.bytes += skb->len;
police->tcf_bstats.packets++;
-#ifdef CONFIG_NET_ESTIMATOR
if (police->tcfp_ewma_rate &&
police->tcf_rate_est.bps >= police->tcfp_ewma_rate) {
police->tcf_qstats.overlimits++;
spin_unlock(&police->tcf_lock);
return police->tcf_action;
}
-#endif
if (skb->len <= police->tcfp_mtu) {
if (police->tcfp_R_tab == NULL) {
spin_unlock(&police->tcf_lock);
if (police->tcfp_result)
RTA_PUT(skb, TCA_POLICE_RESULT, sizeof(int),
&police->tcfp_result);
-#ifdef CONFIG_NET_ESTIMATOR
if (police->tcfp_ewma_rate)
RTA_PUT(skb, TCA_POLICE_AVRATE, 4, &police->tcfp_ewma_rate);
-#endif
return skb->len;
rtattr_failure:
struct gnet_dump d;
if (gnet_stats_start_copy_compat(skb, TCA_STATS2, TCA_STATS,
- TCA_XSTATS, police->tcf_stats_lock,
+ TCA_XSTATS, &police->tcf_lock,
&d) < 0)
goto errout;
if (gnet_stats_copy_basic(&d, &police->tcf_bstats) < 0 ||
-#ifdef CONFIG_NET_ESTIMATOR
gnet_stats_copy_rate_est(&d, &police->tcf_rate_est) < 0 ||
-#endif
gnet_stats_copy_queue(&d, &police->tcf_qstats) < 0)
goto errout;
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <net/netlink.h>
*
*/
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/kmod.h>
#include <linux/netlink.h>
#include <net/netlink.h>
-#include <net/sock.h>
#include <net/pkt_sched.h>
#include <net/pkt_cls.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
-#include <linux/netfilter.h>
-#include <net/ip.h>
-#include <net/netlink.h>
-#include <net/route.h>
#include <linux/skbuff.h>
-#include <net/sock.h>
+#include <net/netlink.h>
#include <net/act_api.h>
#include <net/pkt_cls.h>
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
-#include <net/ip.h>
-#include <net/netlink.h>
-#include <net/route.h>
#include <linux/skbuff.h>
-#include <net/sock.h>
+#include <net/dst.h>
+#include <net/route.h>
+#include <net/netlink.h>
#include <net/act_api.h>
#include <net/pkt_cls.h>
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
-#include <net/ip.h>
-#include <net/route.h>
#include <linux/skbuff.h>
-#include <net/sock.h>
+#include <net/ip.h>
#include <net/netlink.h>
#include <net/act_api.h>
#include <net/pkt_cls.h>
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
-#include <net/ip.h>
#include <linux/ipv6.h>
-#include <net/route.h>
#include <linux/skbuff.h>
-#include <net/sock.h>
#include <net/act_api.h>
#include <net/pkt_cls.h>
#include <net/netlink.h>
#include <linux/kernel.h>
#include <linux/skbuff.h>
#include <linux/errno.h>
-#include <linux/netdevice.h>
-#include <net/ip.h>
#include <net/act_api.h>
#include <net/netlink.h>
#include <net/pkt_cls.h>
-#include <net/route.h>
/*
* nfmark match added by Catalin(ux aka Dino) BOIE <catab at umbrella.ro>
*/
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
#include <linux/rtnetlink.h>
-#include <net/ip.h>
-#include <net/netlink.h>
-#include <net/route.h>
#include <linux/skbuff.h>
-#include <net/sock.h>
+#include <net/netlink.h>
#include <net/act_api.h>
#include <net/pkt_cls.h>
module_init(init_em_cmp);
module_exit(exit_em_cmp);
+MODULE_ALIAS_TCF_EMATCH(TCF_EM_CMP);
module_init(init_em_meta);
module_exit(exit_em_meta);
+
+MODULE_ALIAS_TCF_EMATCH(TCF_EM_META);
module_init(init_em_nbyte);
module_exit(exit_em_nbyte);
+
+MODULE_ALIAS_TCF_EMATCH(TCF_EM_NBYTE);
module_init(init_em_text);
module_exit(exit_em_text);
+
+MODULE_ALIAS_TCF_EMATCH(TCF_EM_TEXT);
module_init(init_em_u32);
module_exit(exit_em_u32);
+
+MODULE_ALIAS_TCF_EMATCH(TCF_EM_U32);
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
#include <linux/rtnetlink.h>
#include <linux/skbuff.h>
#include <net/pkt_cls.h>
if (em->ops == NULL) {
err = -ENOENT;
+#ifdef CONFIG_KMOD
+ __rtnl_unlock();
+ request_module("ematch-kind-%u", em_hdr->kind);
+ rtnl_lock();
+ em->ops = tcf_em_lookup(em_hdr->kind);
+ if (em->ops) {
+ /* We dropped the RTNL mutex in order to
+ * perform the module load. Tell the caller
+ * to replay the request. */
+ module_put(em->ops->owner);
+ err = -EAGAIN;
+ }
+#endif
goto errout;
}
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/kmod.h>
#include <linux/list.h>
-#include <linux/bitops.h>
#include <linux/hrtimer.h>
#include <net/netlink.h>
-#include <net/sock.h>
#include <net/pkt_sched.h>
-#include <asm/processor.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-
static int qdisc_notify(struct sk_buff *oskb, struct nlmsghdr *n, u32 clid,
struct Qdisc *old, struct Qdisc *new);
static int tclass_notify(struct sk_buff *oskb, struct nlmsghdr *n,
sch->handle = handle;
if (!ops->init || (err = ops->init(sch, tca[TCA_OPTIONS-1])) == 0) {
-#ifdef CONFIG_NET_ESTIMATOR
if (tca[TCA_RATE-1]) {
err = gen_new_estimator(&sch->bstats, &sch->rate_est,
sch->stats_lock,
goto err_out3;
}
}
-#endif
qdisc_lock_tree(dev);
list_add_tail(&sch->list, &dev->qdisc_list);
qdisc_unlock_tree(dev);
if (err)
return err;
}
-#ifdef CONFIG_NET_ESTIMATOR
if (tca[TCA_RATE-1])
gen_replace_estimator(&sch->bstats, &sch->rate_est,
sch->stats_lock, tca[TCA_RATE-1]);
-#endif
return 0;
}
goto rtattr_failure;
if (gnet_stats_copy_basic(&d, &q->bstats) < 0 ||
-#ifdef CONFIG_NET_ESTIMATOR
gnet_stats_copy_rate_est(&d, &q->rate_est) < 0 ||
-#endif
gnet_stats_copy_queue(&d, &q->qstats) < 0)
goto rtattr_failure;
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
-#include <linux/interrupt.h>
#include <linux/atmdev.h>
#include <linux/atmclip.h>
-#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <linux/file.h> /* for fput */
#include <net/netlink.h>
#include <net/pkt_sched.h>
-#include <net/sock.h>
extern struct socket *sockfd_lookup(int fd, int *err); /* @@@ fix this */
int ref; /* reference count */
struct gnet_stats_basic bstats;
struct gnet_stats_queue qstats;
- spinlock_t *stats_lock;
struct atm_flow_data *next;
struct atm_flow_data *excess; /* flow for excess traffic;
NULL to set CLP instead */
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/pkt_sched.h>
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
-#include <net/ip.h>
-#include <net/netlink.h>
-#include <net/route.h>
#include <linux/skbuff.h>
-#include <net/sock.h>
+#include <net/netlink.h>
#include <net/pkt_sched.h>
struct gnet_stats_basic bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
- spinlock_t *stats_lock;
struct tc_cbq_xstats xstats;
struct tcf_proto *filter_list;
q->link.ewma_log = TC_CBQ_DEF_EWMA;
q->link.avpkt = q->link.allot/2;
q->link.minidle = -0x7FFFFFFF;
- q->link.stats_lock = &sch->dev->queue_lock;
qdisc_watchdog_init(&q->watchdog, sch);
hrtimer_init(&q->delay_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
cl->xstats.undertime = cl->undertime - q->now;
if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-#ifdef CONFIG_NET_ESTIMATOR
gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
-#endif
gnet_stats_copy_queue(d, &cl->qstats) < 0)
return -1;
tcf_destroy_chain(cl->filter_list);
qdisc_destroy(cl->q);
qdisc_put_rtab(cl->R_tab);
-#ifdef CONFIG_NET_ESTIMATOR
gen_kill_estimator(&cl->bstats, &cl->rate_est);
-#endif
if (cl != &q->link)
kfree(cl);
}
sch_tree_unlock(sch);
-#ifdef CONFIG_NET_ESTIMATOR
if (tca[TCA_RATE-1])
gen_replace_estimator(&cl->bstats, &cl->rate_est,
- cl->stats_lock, tca[TCA_RATE-1]);
-#endif
+ &sch->dev->queue_lock,
+ tca[TCA_RATE-1]);
return 0;
}
cl->allot = parent->allot;
cl->quantum = cl->allot;
cl->weight = cl->R_tab->rate.rate;
- cl->stats_lock = &sch->dev->queue_lock;
sch_tree_lock(sch);
cbq_link_class(cl);
cbq_set_fopt(cl, RTA_DATA(tb[TCA_CBQ_FOPT-1]));
sch_tree_unlock(sch);
-#ifdef CONFIG_NET_ESTIMATOR
if (tca[TCA_RATE-1])
gen_new_estimator(&cl->bstats, &cl->rate_est,
- cl->stats_lock, tca[TCA_RATE-1]);
-#endif
+ &sch->dev->queue_lock, tca[TCA_RATE-1]);
*arg = (unsigned long)cl;
return 0;
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/skbuff.h>
-#include <linux/netdevice.h> /* for pkt_sched */
#include <linux/rtnetlink.h>
#include <net/pkt_sched.h>
#include <net/dsfield.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/pkt_sched.h>
* - Ingress support
*/
-#include <asm/uaccess.h>
-#include <asm/system.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
#include <linux/init.h>
#include <linux/rcupdate.h>
#include <linux/list.h>
-#include <net/sock.h>
#include <net/pkt_sched.h>
/* Main transmission queue. */
spin_unlock_bh(&dev->queue_lock);
}
-/*
- dev->queue_lock serializes queue accesses for this device
- AND dev->qdisc pointer itself.
+static inline int qdisc_qlen(struct Qdisc *q)
+{
+ return q->q.qlen;
+}
- netif_tx_lock serializes accesses to device driver.
+static inline int dev_requeue_skb(struct sk_buff *skb, struct net_device *dev,
+ struct Qdisc *q)
+{
+ if (unlikely(skb->next))
+ dev->gso_skb = skb;
+ else
+ q->ops->requeue(skb, q);
- dev->queue_lock and netif_tx_lock are mutually exclusive,
- if one is grabbed, another must be free.
- */
+ netif_schedule(dev);
+ return 0;
+}
+static inline struct sk_buff *dev_dequeue_skb(struct net_device *dev,
+ struct Qdisc *q)
+{
+ struct sk_buff *skb;
-/* Kick device.
+ if ((skb = dev->gso_skb))
+ dev->gso_skb = NULL;
+ else
+ skb = q->dequeue(q);
- Returns: 0 - queue is empty or throttled.
- >0 - queue is not empty.
+ return skb;
+}
- NOTE: Called under dev->queue_lock with locally disabled BH.
-*/
+static inline int handle_dev_cpu_collision(struct sk_buff *skb,
+ struct net_device *dev,
+ struct Qdisc *q)
+{
+ int ret;
+ if (unlikely(dev->xmit_lock_owner == smp_processor_id())) {
+ /*
+ * Same CPU holding the lock. It may be a transient
+ * configuration error, when hard_start_xmit() recurses. We
+ * detect it by checking xmit owner and drop the packet when
+ * deadloop is detected. Return OK to try the next skb.
+ */
+ kfree_skb(skb);
+ if (net_ratelimit())
+ printk(KERN_WARNING "Dead loop on netdevice %s, "
+ "fix it urgently!\n", dev->name);
+ ret = qdisc_qlen(q);
+ } else {
+ /*
+ * Another cpu is holding lock, requeue & delay xmits for
+ * some time.
+ */
+ __get_cpu_var(netdev_rx_stat).cpu_collision++;
+ ret = dev_requeue_skb(skb, dev, q);
+ }
+
+ return ret;
+}
+
+/*
+ * NOTE: Called under dev->queue_lock with locally disabled BH.
+ *
+ * __LINK_STATE_QDISC_RUNNING guarantees only one CPU can process this
+ * device at a time. dev->queue_lock serializes queue accesses for
+ * this device AND dev->qdisc pointer itself.
+ *
+ * netif_tx_lock serializes accesses to device driver.
+ *
+ * dev->queue_lock and netif_tx_lock are mutually exclusive,
+ * if one is grabbed, another must be free.
+ *
+ * Note, that this procedure can be called by a watchdog timer
+ *
+ * Returns to the caller:
+ * 0 - queue is empty or throttled.
+ * >0 - queue is not empty.
+ *
+ */
static inline int qdisc_restart(struct net_device *dev)
{
struct Qdisc *q = dev->qdisc;
struct sk_buff *skb;
+ unsigned lockless;
+ int ret;
/* Dequeue packet */
- if (((skb = dev->gso_skb)) || ((skb = q->dequeue(q)))) {
- unsigned nolock = (dev->features & NETIF_F_LLTX);
+ if (unlikely((skb = dev_dequeue_skb(dev, q)) == NULL))
+ return 0;
+
+ /*
+ * When the driver has LLTX set, it does its own locking in
+ * start_xmit. These checks are worth it because even uncongested
+ * locks can be quite expensive. The driver can do a trylock, as
+ * is being done here; in case of lock contention it should return
+ * NETDEV_TX_LOCKED and the packet will be requeued.
+ */
+ lockless = (dev->features & NETIF_F_LLTX);
- dev->gso_skb = NULL;
+ if (!lockless && !netif_tx_trylock(dev)) {
+ /* Another CPU grabbed the driver tx lock */
+ return handle_dev_cpu_collision(skb, dev, q);
+ }
- /*
- * When the driver has LLTX set it does its own locking
- * in start_xmit. No need to add additional overhead by
- * locking again. These checks are worth it because
- * even uncongested locks can be quite expensive.
- * The driver can do trylock like here too, in case
- * of lock congestion it should return -1 and the packet
- * will be requeued.
- */
- if (!nolock) {
- if (!netif_tx_trylock(dev)) {
- collision:
- /* So, someone grabbed the driver. */
-
- /* It may be transient configuration error,
- when hard_start_xmit() recurses. We detect
- it by checking xmit owner and drop the
- packet when deadloop is detected.
- */
- if (dev->xmit_lock_owner == smp_processor_id()) {
- kfree_skb(skb);
- if (net_ratelimit())
- printk(KERN_DEBUG "Dead loop on netdevice %s, fix it urgently!\n", dev->name);
- goto out;
- }
- __get_cpu_var(netdev_rx_stat).cpu_collision++;
- goto requeue;
- }
- }
+ /* And release queue */
+ spin_unlock(&dev->queue_lock);
- {
- /* And release queue */
- spin_unlock(&dev->queue_lock);
-
- if (!netif_queue_stopped(dev)) {
- int ret;
-
- ret = dev_hard_start_xmit(skb, dev);
- if (ret == NETDEV_TX_OK) {
- if (!nolock) {
- netif_tx_unlock(dev);
- }
- spin_lock(&dev->queue_lock);
- q = dev->qdisc;
- goto out;
- }
- if (ret == NETDEV_TX_LOCKED && nolock) {
- spin_lock(&dev->queue_lock);
- q = dev->qdisc;
- goto collision;
- }
- }
+ ret = dev_hard_start_xmit(skb, dev);
- /* NETDEV_TX_BUSY - we need to requeue */
- /* Release the driver */
- if (!nolock) {
- netif_tx_unlock(dev);
- }
- spin_lock(&dev->queue_lock);
- q = dev->qdisc;
- }
+ if (!lockless)
+ netif_tx_unlock(dev);
- /* Device kicked us out :(
- This is possible in three cases:
+ spin_lock(&dev->queue_lock);
+ q = dev->qdisc;
- 0. driver is locked
- 1. fastroute is enabled
- 2. device cannot determine busy state
- before start of transmission (f.e. dialout)
- 3. device is buggy (ppp)
- */
+ switch (ret) {
+ case NETDEV_TX_OK:
+ /* Driver sent out skb successfully */
+ ret = qdisc_qlen(q);
+ break;
-requeue:
- if (unlikely(q == &noop_qdisc))
- kfree_skb(skb);
- else if (skb->next)
- dev->gso_skb = skb;
- else
- q->ops->requeue(skb, q);
- netif_schedule(dev);
+ case NETDEV_TX_LOCKED:
+ /* Driver try lock failed */
+ ret = handle_dev_cpu_collision(skb, dev, q);
+ break;
+
+ default:
+ /* Driver returned NETDEV_TX_BUSY - requeue skb */
+ if (unlikely (ret != NETDEV_TX_BUSY && net_ratelimit()))
+ printk(KERN_WARNING "BUG %s code %d qlen %d\n",
+ dev->name, ret, q->q.qlen);
+
+ ret = dev_requeue_skb(skb, dev, q);
+ break;
}
- return 0;
-out:
- BUG_ON((int) q->q.qlen < 0);
- return q->q.qlen;
+ return ret;
}
void __qdisc_run(struct net_device *dev)
return;
list_del(&qdisc->list);
-#ifdef CONFIG_NET_ESTIMATOR
gen_kill_estimator(&qdisc->bstats, &qdisc->rate_est);
-#endif
if (ops->reset)
ops->reset(qdisc);
if (ops->destroy)
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/pkt_sched.h>
#include <net/red.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
-#include <linux/jiffies.h>
#include <linux/compiler.h>
#include <linux/spinlock.h>
#include <linux/skbuff.h>
#include <linux/list.h>
#include <linux/rbtree.h>
#include <linux/init.h>
-#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <linux/pkt_sched.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
#include <net/pkt_cls.h>
-#include <asm/system.h>
#include <asm/div64.h>
/*
struct gnet_stats_basic bstats;
struct gnet_stats_queue qstats;
struct gnet_stats_rate_est rate_est;
- spinlock_t *stats_lock;
unsigned int level; /* class level in hierarchy */
struct tcf_proto *filter_list; /* filter list */
unsigned int filter_cnt; /* filter count */
}
sch_tree_unlock(sch);
-#ifdef CONFIG_NET_ESTIMATOR
if (tca[TCA_RATE-1])
gen_replace_estimator(&cl->bstats, &cl->rate_est,
- cl->stats_lock, tca[TCA_RATE-1]);
-#endif
+ &sch->dev->queue_lock,
+ tca[TCA_RATE-1]);
return 0;
}
cl->qdisc = qdisc_create_dflt(sch->dev, &pfifo_qdisc_ops, classid);
if (cl->qdisc == NULL)
cl->qdisc = &noop_qdisc;
- cl->stats_lock = &sch->dev->queue_lock;
INIT_LIST_HEAD(&cl->children);
cl->vt_tree = RB_ROOT;
cl->cf_tree = RB_ROOT;
cl->cl_pcvtoff = parent->cl_cvtoff;
sch_tree_unlock(sch);
-#ifdef CONFIG_NET_ESTIMATOR
if (tca[TCA_RATE-1])
gen_new_estimator(&cl->bstats, &cl->rate_est,
- cl->stats_lock, tca[TCA_RATE-1]);
-#endif
+ &sch->dev->queue_lock, tca[TCA_RATE-1]);
*arg = (unsigned long)cl;
return 0;
}
tcf_destroy_chain(cl->filter_list);
qdisc_destroy(cl->qdisc);
-#ifdef CONFIG_NET_ESTIMATOR
gen_kill_estimator(&cl->bstats, &cl->rate_est);
-#endif
if (cl != &q->root)
kfree(cl);
}
xstats.rtwork = cl->cl_cumul;
if (gnet_stats_copy_basic(d, &cl->bstats) < 0 ||
-#ifdef CONFIG_NET_ESTIMATOR
gnet_stats_copy_rate_est(d, &cl->rate_est) < 0 ||
-#endif
gnet_stats_copy_queue(d, &cl->qstats) < 0)
return -1;
return -EINVAL;
qopt = RTA_DATA(opt);
- sch->stats_lock = &sch->dev->queue_lock;
-
q->defcls = qopt->defcls;
for (i = 0; i < HFSC_HSIZE; i++)
INIT_LIST_HEAD(&q->clhash[i]);
sch->handle);
if (q->root.qdisc == NULL)
q->root.qdisc = &noop_qdisc;
- q->root.stats_lock = &sch->dev->queue_lock;
INIT_LIST_HEAD(&q->root.children);
q->root.vt_tree = RB_ROOT;
q->root.cf_tree = RB_ROOT;
* $Id: sch_htb.c,v 1.25 2003/12/07 11:08:25 devik Exp devik $
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
-#include <net/ip.h>
-#include <net/route.h>
#include <linux/skbuff.h>
#include <linux/list.h>
#include <linux/compiler.h>
+#include <linux/rbtree.h>
#include <net/netlink.h>
-#include <net/sock.h>
#include <net/pkt_sched.h>
-#include <linux/rbtree.h>
/* HTB algorithm.
Author: devik@cdi.cz
*/
#define HTB_HSIZE 16 /* classid hash size */
-#define HTB_EWMAC 2 /* rate average over HTB_EWMAC*HTB_HSIZE sec */
-#define HTB_RATECM 1 /* whether to use rate computer */
#define HTB_HYSTERESIS 1 /* whether to use mode hysteresis for speedup */
#define HTB_VER 0x30011 /* major must be matched with number suplied by TC as version */
struct tc_htb_xstats xstats; /* our special stats */
int refcnt; /* usage count of this class */
-#ifdef HTB_RATECM
- /* rate measurement counters */
- unsigned long rate_bytes, sum_bytes;
- unsigned long rate_packets, sum_packets;
-#endif
-
/* topology */
int level; /* our level (see above) */
struct htb_class *parent; /* parent class */
/* of un.leaf originals should be done. */
};
-/* TODO: maybe compute rate when size is too large .. or drop ? */
static inline long L2T(struct htb_class *cl, struct qdisc_rate_table *rate,
int size)
{
int slot = size >> rate->rate.cell_log;
- if (slot > 255) {
- cl->xstats.giants++;
- slot = 255;
- }
+ if (slot > 255)
+ return (rate->data[255]*(slot >> 8) + rate->data[slot & 0xFF]);
return rate->data[slot];
}
int rate2quantum; /* quant = rate / rate2quantum */
psched_time_t now; /* cached dequeue time */
struct qdisc_watchdog watchdog;
-#ifdef HTB_RATECM
- struct timer_list rttim; /* rate computer timer */
- int recmp_bucket; /* which hash bucket to recompute next */
-#endif
/* non shaped skbs; let them go directly thru */
struct sk_buff_head direct_queue;
cl->qstats.drops++;
return NET_XMIT_DROP;
} else {
- cl->bstats.packets++;
+ cl->bstats.packets +=
+ skb_is_gso(skb)?skb_shinfo(skb)->gso_segs:1;
cl->bstats.bytes += skb->len;
htb_activate(q, cl);
}
sch->q.qlen++;
- sch->bstats.packets++;
+ sch->bstats.packets += skb_is_gso(skb)?skb_shinfo(skb)->gso_segs:1;
sch->bstats.bytes += skb->len;
return NET_XMIT_SUCCESS;
}
return NET_XMIT_SUCCESS;
}
-#ifdef HTB_RATECM
-#define RT_GEN(D,R) R+=D-(R/HTB_EWMAC);D=0
-static void htb_rate_timer(unsigned long arg)
-{
- struct Qdisc *sch = (struct Qdisc *)arg;
- struct htb_sched *q = qdisc_priv(sch);
- struct hlist_node *p;
- struct htb_class *cl;
-
-
- /* lock queue so that we can muck with it */
- spin_lock_bh(&sch->dev->queue_lock);
-
- q->rttim.expires = jiffies + HZ;
- add_timer(&q->rttim);
-
- /* scan and recompute one bucket at time */
- if (++q->recmp_bucket >= HTB_HSIZE)
- q->recmp_bucket = 0;
-
- hlist_for_each_entry(cl,p, q->hash + q->recmp_bucket, hlist) {
- RT_GEN(cl->sum_bytes, cl->rate_bytes);
- RT_GEN(cl->sum_packets, cl->rate_packets);
- }
- spin_unlock_bh(&sch->dev->queue_lock);
-}
-#endif
-
/**
* htb_charge_class - charges amount "bytes" to leaf and ancestors
*
* In such case we remove class from event queue first.
*/
static void htb_charge_class(struct htb_sched *q, struct htb_class *cl,
- int level, int bytes)
+ int level, struct sk_buff *skb)
{
+ int bytes = skb->len;
long toks, diff;
enum htb_cmode old_mode;
if (cl->cmode != HTB_CAN_SEND)
htb_add_to_wait_tree(q, cl, diff);
}
-#ifdef HTB_RATECM
- /* update rate counters */
- cl->sum_bytes += bytes;
- cl->sum_packets++;
-#endif
/* update byte stats except for leaves which are already updated */
if (cl->level) {
cl->bstats.bytes += bytes;
- cl->bstats.packets++;
+ cl->bstats.packets += skb_is_gso(skb)?
+ skb_shinfo(skb)->gso_segs:1;
}
cl = cl->parent;
}
gives us slightly better performance */
if (!cl->un.leaf.q->q.qlen)
htb_deactivate(q, cl);
- htb_charge_class(q, cl, level, skb->len);
+ htb_charge_class(q, cl, level, skb);
}
return skb;
}
if (q->direct_qlen < 2) /* some devices have zero tx_queue_len */
q->direct_qlen = 2;
-#ifdef HTB_RATECM
- init_timer(&q->rttim);
- q->rttim.function = htb_rate_timer;
- q->rttim.data = (unsigned long)sch;
- q->rttim.expires = jiffies + HZ;
- add_timer(&q->rttim);
-#endif
if ((q->rate2quantum = gopt->rate2quantum) < 1)
q->rate2quantum = 1;
q->defcls = gopt->defcls;
{
struct htb_class *cl = (struct htb_class *)arg;
-#ifdef HTB_RATECM
- cl->rate_est.bps = cl->rate_bytes / (HTB_EWMAC * HTB_HSIZE);
- cl->rate_est.pps = cl->rate_packets / (HTB_EWMAC * HTB_HSIZE);
-#endif
-
if (!cl->level && cl->un.leaf.q)
cl->qstats.qlen = cl->un.leaf.q->q.qlen;
cl->xstats.tokens = cl->tokens;
BUG_TRAP(cl->un.leaf.q);
qdisc_destroy(cl->un.leaf.q);
}
+ gen_kill_estimator(&cl->bstats, &cl->rate_est);
qdisc_put_rtab(cl->rate);
qdisc_put_rtab(cl->ceil);
struct htb_sched *q = qdisc_priv(sch);
qdisc_watchdog_cancel(&q->watchdog);
-#ifdef HTB_RATECM
- del_timer_sync(&q->rttim);
-#endif
/* This line used to be after htb_destroy_class call below
and surprisingly it worked in 2.4. But it must precede it
because filter need its target class alive to be able to call
if (!cl) { /* new class */
struct Qdisc *new_q;
int prio;
+ struct {
+ struct rtattr rta;
+ struct gnet_estimator opt;
+ } est = {
+ .rta = {
+ .rta_len = RTA_LENGTH(sizeof(est.opt)),
+ .rta_type = TCA_RATE,
+ },
+ .opt = {
+ /* 4s interval, 16s averaging constant */
+ .interval = 2,
+ .ewma_log = 2,
+ },
+ };
/* check for valid classid */
if (!classid || TC_H_MAJ(classid ^ sch->handle)
if ((cl = kzalloc(sizeof(*cl), GFP_KERNEL)) == NULL)
goto failure;
+ gen_new_estimator(&cl->bstats, &cl->rate_est,
+ &sch->dev->queue_lock,
+ tca[TCA_RATE-1] ? : &est.rta);
cl->refcnt = 1;
INIT_LIST_HEAD(&cl->sibling);
INIT_HLIST_NODE(&cl->hlist);
hlist_add_head(&cl->hlist, q->hash + htb_hash(classid));
list_add_tail(&cl->sibling,
parent ? &parent->children : &q->root);
- } else
+ } else {
+ if (tca[TCA_RATE-1])
+ gen_replace_estimator(&cl->bstats, &cl->rate_est,
+ &sch->dev->queue_lock,
+ tca[TCA_RATE-1]);
sch_tree_lock(sch);
+ }
/* it used to be a nasty bug here, we have to check that node
is really leaf before changing cl->un.leaf ! */
#include <linux/module.h>
#include <linux/types.h>
+#include <linux/list.h>
#include <linux/skbuff.h>
-#include <linux/netdevice.h>
#include <linux/rtnetlink.h>
#include <linux/netfilter_ipv4.h>
#include <linux/netfilter_ipv6.h>
#include <linux/netfilter.h>
-#include <linux/smp.h>
#include <net/netlink.h>
#include <net/pkt_sched.h>
-#include <asm/byteorder.h>
-#include <asm/uaccess.h>
-#include <linux/kmod.h>
-#include <linux/stat.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
#undef DEBUG_INGRESS
*/
#include <linux/module.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/errno.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/rtnetlink.h>
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
-#include <net/ip.h>
-#include <net/route.h>
#include <linux/skbuff.h>
#include <net/netlink.h>
-#include <net/sock.h>
#include <net/pkt_sched.h>
struct prio_sched_data
{
int bands;
+ int curband; /* for round-robin */
struct tcf_proto *filter_list;
u8 prio2band[TC_PRIO_MAX+1];
struct Qdisc *queues[TCQ_PRIO_BANDS];
+ int mq;
};
#endif
if (TC_H_MAJ(band))
band = 0;
- return q->queues[q->prio2band[band&TC_PRIO_MAX]];
+ band = q->prio2band[band&TC_PRIO_MAX];
+ goto out;
}
band = res.classid;
}
band = TC_H_MIN(band) - 1;
if (band >= q->bands)
- return q->queues[q->prio2band[0]];
-
+ band = q->prio2band[0];
+out:
+ if (q->mq)
+ skb_set_queue_mapping(skb, band);
return q->queues[band];
}
struct Qdisc *qdisc;
for (prio = 0; prio < q->bands; prio++) {
- qdisc = q->queues[prio];
- skb = qdisc->dequeue(qdisc);
- if (skb) {
- sch->q.qlen--;
- return skb;
+ /* Check if the target subqueue is available before
+ * pulling an skb. This way we avoid excessive requeues
+ * for slower queues.
+ */
+ if (!netif_subqueue_stopped(sch->dev, (q->mq ? prio : 0))) {
+ qdisc = q->queues[prio];
+ skb = qdisc->dequeue(qdisc);
+ if (skb) {
+ sch->q.qlen--;
+ return skb;
+ }
}
}
return NULL;
}
+static struct sk_buff *rr_dequeue(struct Qdisc* sch)
+{
+ struct sk_buff *skb;
+ struct prio_sched_data *q = qdisc_priv(sch);
+ struct Qdisc *qdisc;
+ int bandcount;
+
+ /* Only take one pass through the queues. If nothing is available,
+ * return nothing.
+ */
+ for (bandcount = 0; bandcount < q->bands; bandcount++) {
+ /* Check if the target subqueue is available before
+ * pulling an skb. This way we avoid excessive requeues
+ * for slower queues. If the queue is stopped, try the
+ * next queue.
+ */
+ if (!netif_subqueue_stopped(sch->dev,
+ (q->mq ? q->curband : 0))) {
+ qdisc = q->queues[q->curband];
+ skb = qdisc->dequeue(qdisc);
+ if (skb) {
+ sch->q.qlen--;
+ q->curband++;
+ if (q->curband >= q->bands)
+ q->curband = 0;
+ return skb;
+ }
+ }
+ q->curband++;
+ if (q->curband >= q->bands)
+ q->curband = 0;
+ }
+ return NULL;
+}
+
static unsigned int prio_drop(struct Qdisc* sch)
{
struct prio_sched_data *q = qdisc_priv(sch);
static int prio_tune(struct Qdisc *sch, struct rtattr *opt)
{
struct prio_sched_data *q = qdisc_priv(sch);
- struct tc_prio_qopt *qopt = RTA_DATA(opt);
+ struct tc_prio_qopt *qopt;
+ struct rtattr *tb[TCA_PRIO_MAX];
int i;
- if (opt->rta_len < RTA_LENGTH(sizeof(*qopt)))
+ if (rtattr_parse_nested_compat(tb, TCA_PRIO_MAX, opt, qopt,
+ sizeof(*qopt)))
return -EINVAL;
- if (qopt->bands > TCQ_PRIO_BANDS || qopt->bands < 2)
+ q->bands = qopt->bands;
+ /* If we're multiqueue, make sure the number of incoming bands
+ * matches the number of queues on the device we're associating with.
+ * If the number of bands requested is zero, then set q->bands to
+ * dev->egress_subqueue_count.
+ */
+ q->mq = RTA_GET_FLAG(tb[TCA_PRIO_MQ - 1]);
+ if (q->mq) {
+ if (sch->handle != TC_H_ROOT)
+ return -EINVAL;
+ if (netif_is_multiqueue(sch->dev)) {
+ if (q->bands == 0)
+ q->bands = sch->dev->egress_subqueue_count;
+ else if (q->bands != sch->dev->egress_subqueue_count)
+ return -EINVAL;
+ } else
+ return -EOPNOTSUPP;
+ }
+
+ if (q->bands > TCQ_PRIO_BANDS || q->bands < 2)
return -EINVAL;
for (i=0; i<=TC_PRIO_MAX; i++) {
- if (qopt->priomap[i] >= qopt->bands)
+ if (qopt->priomap[i] >= q->bands)
return -EINVAL;
}
sch_tree_lock(sch);
- q->bands = qopt->bands;
memcpy(q->prio2band, qopt->priomap, TC_PRIO_MAX+1);
for (i=q->bands; i<TCQ_PRIO_BANDS; i++) {
{
struct prio_sched_data *q = qdisc_priv(sch);
unsigned char *b = skb_tail_pointer(skb);
+ struct rtattr *nest;
struct tc_prio_qopt opt;
opt.bands = q->bands;
memcpy(&opt.priomap, q->prio2band, TC_PRIO_MAX+1);
- RTA_PUT(skb, TCA_OPTIONS, sizeof(opt), &opt);
+
+ nest = RTA_NEST_COMPAT(skb, TCA_OPTIONS, sizeof(opt), &opt);
+ if (q->mq)
+ RTA_PUT_FLAG(skb, TCA_PRIO_MQ);
+ RTA_NEST_COMPAT_END(skb, nest);
+
return skb->len;
rtattr_failure:
.owner = THIS_MODULE,
};
+static struct Qdisc_ops rr_qdisc_ops = {
+ .next = NULL,
+ .cl_ops = &prio_class_ops,
+ .id = "rr",
+ .priv_size = sizeof(struct prio_sched_data),
+ .enqueue = prio_enqueue,
+ .dequeue = rr_dequeue,
+ .requeue = prio_requeue,
+ .drop = prio_drop,
+ .init = prio_init,
+ .reset = prio_reset,
+ .destroy = prio_destroy,
+ .change = prio_tune,
+ .dump = prio_dump,
+ .owner = THIS_MODULE,
+};
+
static int __init prio_module_init(void)
{
- return register_qdisc(&prio_qdisc_ops);
+ int err;
+
+ err = register_qdisc(&prio_qdisc_ops);
+ if (err < 0)
+ return err;
+ err = register_qdisc(&rr_qdisc_ops);
+ if (err < 0)
+ unregister_qdisc(&prio_qdisc_ops);
+ return err;
}
static void __exit prio_module_exit(void)
{
unregister_qdisc(&prio_qdisc_ops);
+ unregister_qdisc(&rr_qdisc_ops);
}
module_init(prio_module_init)
module_exit(prio_module_exit)
MODULE_LICENSE("GPL");
+MODULE_ALIAS("sch_rr");
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <net/pkt_sched.h>
#include <net/inet_ecn.h>
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/jiffies.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
#include <linux/init.h>
-#include <net/ip.h>
-#include <net/netlink.h>
#include <linux/ipv6.h>
-#include <net/route.h>
#include <linux/skbuff.h>
-#include <net/sock.h>
+#include <net/ip.h>
+#include <net/netlink.h>
#include <net/pkt_sched.h>
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
-#include <linux/jiffies.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
-#include <net/ip.h>
-#include <net/netlink.h>
-#include <net/route.h>
#include <linux/skbuff.h>
-#include <net/sock.h>
+#include <net/netlink.h>
#include <net/pkt_sched.h>
*/
#include <linux/module.h>
-#include <asm/uaccess.h>
-#include <asm/system.h>
-#include <linux/bitops.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/socket.h>
-#include <linux/sockios.h>
-#include <linux/in.h>
#include <linux/errno.h>
-#include <linux/interrupt.h>
#include <linux/if_arp.h>
-#include <linux/if_ether.h>
-#include <linux/inet.h>
#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/notifier.h>
#include <linux/init.h>
-#include <net/ip.h>
-#include <net/route.h>
#include <linux/skbuff.h>
#include <linux/moduleparam.h>
-#include <net/sock.h>
+#include <net/dst.h>
+#include <net/neighbour.h>
#include <net/pkt_sched.h>
/*
return 0;
}
-/* "teql*" netdevice routines */
static int
__teql_resolve(struct sk_buff *skb, struct sk_buff *skb_res, struct net_device *dev)
int busy;
int nores;
int len = skb->len;
+ int subq = skb->queue_mapping;
struct sk_buff *skb_res = NULL;
start = master->slaves;
if (slave->qdisc_sleeping != q)
continue;
- if (netif_queue_stopped(slave) || ! netif_running(slave)) {
+ if (netif_queue_stopped(slave) ||
+ netif_subqueue_stopped(slave, subq) ||
+ !netif_running(slave)) {
busy = 1;
continue;
}
case 0:
if (netif_tx_trylock(slave)) {
if (!netif_queue_stopped(slave) &&
+ !netif_subqueue_stopped(slave, subq) &&
slave->hard_start_xmit(skb, slave) == 0) {
netif_tx_unlock(slave);
master->slaves = NEXT_SLAVE(q);
return 0;
}
-static struct seq_operations sctp_eps_ops = {
+static const struct seq_operations sctp_eps_ops = {
.start = sctp_eps_seq_start,
.next = sctp_eps_seq_next,
.stop = sctp_eps_seq_stop,
return 0;
}
-static struct seq_operations sctp_assoc_ops = {
+static const struct seq_operations sctp_assoc_ops = {
.start = sctp_assocs_seq_start,
.next = sctp_assocs_seq_next,
.stop = sctp_assocs_seq_stop,
return cd->cache_show(m, cd, cp);
}
-static struct seq_operations cache_content_op = {
+static const struct seq_operations cache_content_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
/*
* net/tipc/eth_media.c: Ethernet bearer support for TIPC
*
- * Copyright (c) 2001-2006, Ericsson AB
- * Copyright (c) 2005-2006, Wind River Systems
+ * Copyright (c) 2001-2007, Ericsson AB
+ * Copyright (c) 2005-2007, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/**
* recv_msg - handle incoming TIPC message from an Ethernet interface
*
+ * Accept only packets explicitly sent to this node, or broadcast packets;
+ * ignores packets sent using Ethernet multicast, and traffic sent to other
+ * nodes (which can happen if interface is running in promiscuous mode).
* Routine truncates any Ethernet padding/CRC appended to the message,
* and ensures message size matches actual length
*/
u32 size;
if (likely(eb_ptr->bearer)) {
- if (likely(!dev->promiscuity) ||
- !memcmp(skb_mac_header(buf), dev->dev_addr, ETH_ALEN) ||
- !memcmp(skb_mac_header(buf), dev->broadcast, ETH_ALEN)) {
+ if (likely(buf->pkt_type <= PACKET_BROADCAST)) {
size = msg_size((struct tipc_msg *)buf->data);
skb_trim(buf, size);
if (likely(buf->len == size)) {
/*
* net/tipc/link.c: TIPC link code
*
- * Copyright (c) 1996-2006, Ericsson AB
- * Copyright (c) 2004-2006, Wind River Systems
+ * Copyright (c) 1996-2007, Ericsson AB
+ * Copyright (c) 2004-2007, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* (Must not hold any locks while building message.)
*/
- res = msg_build(hdr, msg_sect, num_sect, sender->max_pkt,
+ res = msg_build(hdr, msg_sect, num_sect, sender->publ.max_pkt,
!sender->user_port, &buf);
read_lock_bh(&tipc_net_lock);
if (likely(l_ptr)) {
if (likely(buf)) {
res = link_send_buf_fast(l_ptr, buf,
- &sender->max_pkt);
+ &sender->publ.max_pkt);
if (unlikely(res < 0))
buf_discard(buf);
exit:
* then re-try fast path or fragment the message
*/
- sender->max_pkt = link_max_pkt(l_ptr);
+ sender->publ.max_pkt = link_max_pkt(l_ptr);
tipc_node_unlock(node);
read_unlock_bh(&tipc_net_lock);
- if ((msg_hdr_sz(hdr) + res) <= sender->max_pkt)
+ if ((msg_hdr_sz(hdr) + res) <= sender->publ.max_pkt)
goto again;
return link_send_sections_long(sender, msg_sect,
again:
fragm_no = 1;
- max_pkt = sender->max_pkt - INT_H_SIZE;
+ max_pkt = sender->publ.max_pkt - INT_H_SIZE;
/* leave room for tunnel header in case of link changeover */
fragm_sz = max_pkt - INT_H_SIZE;
/* leave room for fragmentation header in each fragment */
goto reject;
}
if (link_max_pkt(l_ptr) < max_pkt) {
- sender->max_pkt = link_max_pkt(l_ptr);
+ sender->publ.max_pkt = link_max_pkt(l_ptr);
tipc_node_unlock(node);
for (; buf_chain; buf_chain = buf) {
buf = buf_chain->next;
/*
* net/tipc/port.c: TIPC port code
*
- * Copyright (c) 1992-2006, Ericsson AB
- * Copyright (c) 2004-2005, Wind River Systems
+ * Copyright (c) 1992-2007, Ericsson AB
+ * Copyright (c) 2004-2007, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
}
tipc_port_lock(ref);
+ p_ptr->publ.usr_handle = usr_handle;
+ p_ptr->publ.max_pkt = MAX_PKT_DEFAULT;
p_ptr->publ.ref = ref;
msg = &p_ptr->publ.phdr;
msg_init(msg, DATA_LOW, TIPC_NAMED_MSG, TIPC_OK, LONG_H_SIZE, 0);
msg_set_importance(msg,importance);
p_ptr->last_in_seqno = 41;
p_ptr->sent = 1;
- p_ptr->publ.usr_handle = usr_handle;
INIT_LIST_HEAD(&p_ptr->wait_list);
INIT_LIST_HEAD(&p_ptr->subscription.nodesub_list);
p_ptr->congested_link = NULL;
- p_ptr->max_pkt = MAX_PKT_DEFAULT;
p_ptr->dispatcher = dispatcher;
p_ptr->wakeup = wakeup;
p_ptr->user_port = NULL;
res = TIPC_OK;
exit:
tipc_port_unlock(p_ptr);
- p_ptr->max_pkt = tipc_link_get_max_pkt(peer->node, ref);
+ p_ptr->publ.max_pkt = tipc_link_get_max_pkt(peer->node, ref);
return res;
}
/*
* net/tipc/port.h: Include file for TIPC port code
*
- * Copyright (c) 1994-2006, Ericsson AB
- * Copyright (c) 2004-2005, Wind River Systems
+ * Copyright (c) 1994-2007, Ericsson AB
+ * Copyright (c) 2004-2007, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* @acked:
* @publications: list of publications for port
* @pub_count: total # of publications port has made during its lifetime
- * @max_pkt: maximum packet size "hint" used when building messages sent by port
* @probing_state:
* @probing_interval:
* @last_in_seqno:
u32 acked;
struct list_head publications;
u32 pub_count;
- u32 max_pkt;
u32 probing_state;
u32 probing_interval;
u32 last_in_seqno;
/*
* net/tipc/socket.c: TIPC socket API
*
- * Copyright (c) 2001-2006, Ericsson AB
- * Copyright (c) 2004-2006, Wind River Systems
+ * Copyright (c) 2001-2007, Ericsson AB
+ * Copyright (c) 2004-2007, Wind River Systems
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
static int send_stream(struct kiocb *iocb, struct socket *sock,
struct msghdr *m, size_t total_len)
{
+ struct tipc_port *tport;
struct msghdr my_msg;
struct iovec my_iov;
struct iovec *curr_iov;
int curr_iovlen;
char __user *curr_start;
+ u32 hdr_size;
int curr_left;
int bytes_to_send;
int bytes_sent;
int res;
- if (likely(total_len <= TIPC_MAX_USER_MSG_SIZE))
- return send_packet(iocb, sock, m, total_len);
-
- /* Can only send large data streams if already connected */
+ /* Handle special cases where there is no connection */
if (unlikely(sock->state != SS_CONNECTED)) {
- if (sock->state == SS_DISCONNECTING)
+ if (sock->state == SS_UNCONNECTED)
+ return send_packet(iocb, sock, m, total_len);
+ else if (sock->state == SS_DISCONNECTING)
return -EPIPE;
else
return -ENOTCONN;
my_msg.msg_name = NULL;
bytes_sent = 0;
+ tport = tipc_sk(sock->sk)->p;
+ hdr_size = msg_hdr_sz(&tport->phdr);
+
while (curr_iovlen--) {
curr_start = curr_iov->iov_base;
curr_left = curr_iov->iov_len;
while (curr_left) {
- bytes_to_send = (curr_left < TIPC_MAX_USER_MSG_SIZE)
- ? curr_left : TIPC_MAX_USER_MSG_SIZE;
+ bytes_to_send = tport->max_pkt - hdr_size;
+ if (bytes_to_send > TIPC_MAX_USER_MSG_SIZE)
+ bytes_to_send = TIPC_MAX_USER_MSG_SIZE;
+ if (curr_left < bytes_to_send)
+ bytes_to_send = curr_left;
my_iov.iov_base = curr_start;
my_iov.iov_len = bytes_to_send;
if ((res = send_packet(iocb, sock, &my_msg, 0)) < 0) {
- return bytes_sent ? bytes_sent : res;
+ if (bytes_sent != 0)
+ res = bytes_sent;
+ return res;
}
curr_left -= bytes_to_send;
curr_start += bytes_to_send;
return res;
}
-/**
- * Placeholders for non-implemented functionality
- *
- * Returns error code (POSIX-compliant where defined)
- */
-
-static int ioctl(struct socket *s, u32 cmd, unsigned long arg)
-{
- return -EINVAL;
-}
-
-static int no_mmap(struct file *file, struct socket *sock,
- struct vm_area_struct *vma)
-{
- return -EINVAL;
-}
-static ssize_t no_sendpage(struct socket *sock, struct page *page,
- int offset, size_t size, int flags)
-{
- return -EINVAL;
-}
-
-static int no_skpair(struct socket *s1, struct socket *s2)
-{
- return -EOPNOTSUPP;
-}
-
/**
* Protocol switches for the various types of TIPC sockets
*/
.release = release,
.bind = bind,
.connect = connect,
- .socketpair = no_skpair,
+ .socketpair = sock_no_socketpair,
.accept = accept,
.getname = get_name,
.poll = poll,
- .ioctl = ioctl,
+ .ioctl = sock_no_ioctl,
.listen = listen,
.shutdown = shutdown,
.setsockopt = setsockopt,
.getsockopt = getsockopt,
.sendmsg = send_msg,
.recvmsg = recv_msg,
- .mmap = no_mmap,
- .sendpage = no_sendpage
+ .mmap = sock_no_mmap,
+ .sendpage = sock_no_sendpage
};
static struct proto_ops packet_ops = {
.release = release,
.bind = bind,
.connect = connect,
- .socketpair = no_skpair,
+ .socketpair = sock_no_socketpair,
.accept = accept,
.getname = get_name,
.poll = poll,
- .ioctl = ioctl,
+ .ioctl = sock_no_ioctl,
.listen = listen,
.shutdown = shutdown,
.setsockopt = setsockopt,
.getsockopt = getsockopt,
.sendmsg = send_packet,
.recvmsg = recv_msg,
- .mmap = no_mmap,
- .sendpage = no_sendpage
+ .mmap = sock_no_mmap,
+ .sendpage = sock_no_sendpage
};
static struct proto_ops stream_ops = {
.release = release,
.bind = bind,
.connect = connect,
- .socketpair = no_skpair,
+ .socketpair = sock_no_socketpair,
.accept = accept,
.getname = get_name,
.poll = poll,
- .ioctl = ioctl,
+ .ioctl = sock_no_ioctl,
.listen = listen,
.shutdown = shutdown,
.setsockopt = setsockopt,
.getsockopt = getsockopt,
.sendmsg = send_stream,
.recvmsg = recv_stream,
- .mmap = no_mmap,
- .sendpage = no_sendpage
+ .mmap = sock_no_mmap,
+ .sendpage = sock_no_sendpage
};
static struct net_proto_family tipc_family_ops = {
u->dentry = NULL;
u->mnt = NULL;
spin_lock_init(&u->lock);
- atomic_set(&u->inflight, sock ? 0 : -1);
+ atomic_set(&u->inflight, 0);
+ INIT_LIST_HEAD(&u->link);
mutex_init(&u->readlock); /* single task reading lock */
init_waitqueue_head(&u->peer_wait);
unix_insert_socket(unix_sockets_unbound, sk);
/* take ten and and send info to listening sock */
spin_lock(&other->sk_receive_queue.lock);
__skb_queue_tail(&other->sk_receive_queue, skb);
- /* Undo artificially decreased inflight after embrion
- * is installed to listening socket. */
- atomic_inc(&newu->inflight);
spin_unlock(&other->sk_receive_queue.lock);
unix_state_unlock(other);
other->sk_data_ready(other, 0);
return 0;
}
-static struct seq_operations unix_seq_ops = {
+static const struct seq_operations unix_seq_ops = {
.start = unix_seq_start,
.next = unix_seq_next,
.stop = unix_seq_stop,
* AV 1 Mar 1999
* Damn. Added missing check for ->dead in listen queues scanning.
*
+ * Miklos Szeredi 25 Jun 2007
+ * Reimplement with a cycle collecting algorithm. This should
+ * solve several problems with the previous code, like being racy
+ * wrt receive and holding up unrelated socket operations.
*/
#include <linux/kernel.h>
/* Internal data structures and random procedures: */
-#define GC_HEAD ((struct sock *)(-1))
-#define GC_ORPHAN ((struct sock *)(-3))
-
-static struct sock *gc_current = GC_HEAD; /* stack of objects to mark */
+static LIST_HEAD(gc_inflight_list);
+static LIST_HEAD(gc_candidates);
+static DEFINE_SPINLOCK(unix_gc_lock);
atomic_t unix_tot_inflight = ATOMIC_INIT(0);
{
struct sock *s = unix_get_socket(fp);
if(s) {
- atomic_inc(&unix_sk(s)->inflight);
+ struct unix_sock *u = unix_sk(s);
+ spin_lock(&unix_gc_lock);
+ if (atomic_inc_return(&u->inflight) == 1) {
+ BUG_ON(!list_empty(&u->link));
+ list_add_tail(&u->link, &gc_inflight_list);
+ } else {
+ BUG_ON(list_empty(&u->link));
+ }
atomic_inc(&unix_tot_inflight);
+ spin_unlock(&unix_gc_lock);
}
}
{
struct sock *s = unix_get_socket(fp);
if(s) {
- atomic_dec(&unix_sk(s)->inflight);
+ struct unix_sock *u = unix_sk(s);
+ spin_lock(&unix_gc_lock);
+ BUG_ON(list_empty(&u->link));
+ if (atomic_dec_and_test(&u->inflight))
+ list_del_init(&u->link);
atomic_dec(&unix_tot_inflight);
+ spin_unlock(&unix_gc_lock);
}
}
+static inline struct sk_buff *sock_queue_head(struct sock *sk)
+{
+ return (struct sk_buff *) &sk->sk_receive_queue;
+}
-/*
- * Garbage Collector Support Functions
- */
+#define receive_queue_for_each_skb(sk, next, skb) \
+ for (skb = sock_queue_head(sk)->next, next = skb->next; \
+ skb != sock_queue_head(sk); skb = next, next = skb->next)
-static inline struct sock *pop_stack(void)
+static void scan_inflight(struct sock *x, void (*func)(struct sock *),
+ struct sk_buff_head *hitlist)
{
- struct sock *p = gc_current;
- gc_current = unix_sk(p)->gc_tree;
- return p;
+ struct sk_buff *skb;
+ struct sk_buff *next;
+
+ spin_lock(&x->sk_receive_queue.lock);
+ receive_queue_for_each_skb(x, next, skb) {
+ /*
+ * Do we have file descriptors ?
+ */
+ if (UNIXCB(skb).fp) {
+ bool hit = false;
+ /*
+ * Process the descriptors of this socket
+ */
+ int nfd = UNIXCB(skb).fp->count;
+ struct file **fp = UNIXCB(skb).fp->fp;
+ while (nfd--) {
+ /*
+ * Get the socket the fd matches
+ * if it indeed does so
+ */
+ struct sock *sk = unix_get_socket(*fp++);
+ if(sk) {
+ hit = true;
+ func(sk);
+ }
+ }
+ if (hit && hitlist != NULL) {
+ __skb_unlink(skb, &x->sk_receive_queue);
+ __skb_queue_tail(hitlist, skb);
+ }
+ }
+ }
+ spin_unlock(&x->sk_receive_queue.lock);
}
-static inline int empty_stack(void)
+static void scan_children(struct sock *x, void (*func)(struct sock *),
+ struct sk_buff_head *hitlist)
{
- return gc_current == GC_HEAD;
+ if (x->sk_state != TCP_LISTEN)
+ scan_inflight(x, func, hitlist);
+ else {
+ struct sk_buff *skb;
+ struct sk_buff *next;
+ struct unix_sock *u;
+ LIST_HEAD(embryos);
+
+ /*
+ * For a listening socket collect the queued embryos
+ * and perform a scan on them as well.
+ */
+ spin_lock(&x->sk_receive_queue.lock);
+ receive_queue_for_each_skb(x, next, skb) {
+ u = unix_sk(skb->sk);
+
+ /*
+ * An embryo cannot be in-flight, so it's safe
+ * to use the list link.
+ */
+ BUG_ON(!list_empty(&u->link));
+ list_add_tail(&u->link, &embryos);
+ }
+ spin_unlock(&x->sk_receive_queue.lock);
+
+ while (!list_empty(&embryos)) {
+ u = list_entry(embryos.next, struct unix_sock, link);
+ scan_inflight(&u->sk, func, hitlist);
+ list_del_init(&u->link);
+ }
+ }
}
-static void maybe_unmark_and_push(struct sock *x)
+static void dec_inflight(struct sock *sk)
{
- struct unix_sock *u = unix_sk(x);
+ atomic_dec(&unix_sk(sk)->inflight);
+}
- if (u->gc_tree != GC_ORPHAN)
- return;
- sock_hold(x);
- u->gc_tree = gc_current;
- gc_current = x;
+static void inc_inflight(struct sock *sk)
+{
+ atomic_inc(&unix_sk(sk)->inflight);
}
+static void inc_inflight_move_tail(struct sock *sk)
+{
+ struct unix_sock *u = unix_sk(sk);
+
+ atomic_inc(&u->inflight);
+ /*
+ * If this is still a candidate, move it to the end of the
+ * list, so that it's checked even if it was already passed
+ * over
+ */
+ if (u->gc_candidate)
+ list_move_tail(&u->link, &gc_candidates);
+}
/* The external entry point: unix_gc() */
void unix_gc(void)
{
- static DEFINE_MUTEX(unix_gc_sem);
- int i;
- struct sock *s;
- struct sk_buff_head hitlist;
- struct sk_buff *skb;
+ static bool gc_in_progress = false;
- /*
- * Avoid a recursive GC.
- */
+ struct unix_sock *u;
+ struct unix_sock *next;
+ struct sk_buff_head hitlist;
+ struct list_head cursor;
- if (!mutex_trylock(&unix_gc_sem))
- return;
+ spin_lock(&unix_gc_lock);
- spin_lock(&unix_table_lock);
+ /* Avoid a recursive GC. */
+ if (gc_in_progress)
+ goto out;
- forall_unix_sockets(i, s)
- {
- unix_sk(s)->gc_tree = GC_ORPHAN;
- }
+ gc_in_progress = true;
/*
- * Everything is now marked
- */
-
- /* Invariant to be maintained:
- - everything unmarked is either:
- -- (a) on the stack, or
- -- (b) has all of its children unmarked
- - everything on the stack is always unmarked
- - nothing is ever pushed onto the stack twice, because:
- -- nothing previously unmarked is ever pushed on the stack
+ * First, select candidates for garbage collection. Only
+ * in-flight sockets are considered, and from those only ones
+ * which don't have any external reference.
+ *
+ * Holding unix_gc_lock will protect these candidates from
+ * being detached, and hence from gaining an external
+ * reference. This also means, that since there are no
+ * possible receivers, the receive queues of these sockets are
+ * static during the GC, even though the dequeue is done
+ * before the detach without atomicity guarantees.
*/
+ list_for_each_entry_safe(u, next, &gc_inflight_list, link) {
+ int total_refs;
+ int inflight_refs;
+
+ total_refs = file_count(u->sk.sk_socket->file);
+ inflight_refs = atomic_read(&u->inflight);
+
+ BUG_ON(inflight_refs < 1);
+ BUG_ON(total_refs < inflight_refs);
+ if (total_refs == inflight_refs) {
+ list_move_tail(&u->link, &gc_candidates);
+ u->gc_candidate = 1;
+ }
+ }
/*
- * Push root set
+ * Now remove all internal in-flight reference to children of
+ * the candidates.
*/
-
- forall_unix_sockets(i, s)
- {
- int open_count = 0;
-
- /*
- * If all instances of the descriptor are not
- * in flight we are in use.
- *
- * Special case: when socket s is embrion, it may be
- * hashed but still not in queue of listening socket.
- * In this case (see unix_create1()) we set artificial
- * negative inflight counter to close race window.
- * It is trick of course and dirty one.
- */
- if (s->sk_socket && s->sk_socket->file)
- open_count = file_count(s->sk_socket->file);
- if (open_count > atomic_read(&unix_sk(s)->inflight))
- maybe_unmark_and_push(s);
- }
+ list_for_each_entry(u, &gc_candidates, link)
+ scan_children(&u->sk, dec_inflight, NULL);
/*
- * Mark phase
+ * Restore the references for children of all candidates,
+ * which have remaining references. Do this recursively, so
+ * only those remain, which form cyclic references.
+ *
+ * Use a "cursor" link, to make the list traversal safe, even
+ * though elements might be moved about.
*/
+ list_add(&cursor, &gc_candidates);
+ while (cursor.next != &gc_candidates) {
+ u = list_entry(cursor.next, struct unix_sock, link);
- while (!empty_stack())
- {
- struct sock *x = pop_stack();
- struct sock *sk;
-
- spin_lock(&x->sk_receive_queue.lock);
- skb = skb_peek(&x->sk_receive_queue);
-
- /*
- * Loop through all but first born
- */
+ /* Move cursor to after the current position. */
+ list_move(&cursor, &u->link);
- while (skb && skb != (struct sk_buff *)&x->sk_receive_queue) {
- /*
- * Do we have file descriptors ?
- */
- if(UNIXCB(skb).fp)
- {
- /*
- * Process the descriptors of this socket
- */
- int nfd=UNIXCB(skb).fp->count;
- struct file **fp = UNIXCB(skb).fp->fp;
- while(nfd--)
- {
- /*
- * Get the socket the fd matches if
- * it indeed does so
- */
- if((sk=unix_get_socket(*fp++))!=NULL)
- {
- maybe_unmark_and_push(sk);
- }
- }
- }
- /* We have to scan not-yet-accepted ones too */
- if (x->sk_state == TCP_LISTEN)
- maybe_unmark_and_push(skb->sk);
- skb=skb->next;
+ if (atomic_read(&u->inflight) > 0) {
+ list_move_tail(&u->link, &gc_inflight_list);
+ u->gc_candidate = 0;
+ scan_children(&u->sk, inc_inflight_move_tail, NULL);
}
- spin_unlock(&x->sk_receive_queue.lock);
- sock_put(x);
}
+ list_del(&cursor);
+ /*
+ * Now gc_candidates contains only garbage. Restore original
+ * inflight counters for these as well, and remove the skbuffs
+ * which are creating the cycle(s).
+ */
skb_queue_head_init(&hitlist);
+ list_for_each_entry(u, &gc_candidates, link)
+ scan_children(&u->sk, inc_inflight, &hitlist);
- forall_unix_sockets(i, s)
- {
- struct unix_sock *u = unix_sk(s);
+ spin_unlock(&unix_gc_lock);
- if (u->gc_tree == GC_ORPHAN) {
- struct sk_buff *nextsk;
+ /* Here we are. Hitlist is filled. Die. */
+ __skb_queue_purge(&hitlist);
- spin_lock(&s->sk_receive_queue.lock);
- skb = skb_peek(&s->sk_receive_queue);
- while (skb &&
- skb != (struct sk_buff *)&s->sk_receive_queue) {
- nextsk = skb->next;
- /*
- * Do we have file descriptors ?
- */
- if (UNIXCB(skb).fp) {
- __skb_unlink(skb,
- &s->sk_receive_queue);
- __skb_queue_tail(&hitlist, skb);
- }
- skb = nextsk;
- }
- spin_unlock(&s->sk_receive_queue.lock);
- }
- u->gc_tree = GC_ORPHAN;
- }
- spin_unlock(&unix_table_lock);
+ spin_lock(&unix_gc_lock);
- /*
- * Here we are. Hitlist is filled. Die.
- */
+ /* All candidates should have been detached by now. */
+ BUG_ON(!list_empty(&gc_candidates));
+ gc_in_progress = false;
- __skb_queue_purge(&hitlist);
- mutex_unlock(&unix_gc_sem);
+ out:
+ spin_unlock(&unix_gc_lock);
}
return 0;
}
-static struct seq_operations config_op = {
+static const struct seq_operations config_op = {
.start = r_start,
.next = r_next,
.stop = r_stop,
.show = config_show,
};
-static struct seq_operations status_op = {
+static const struct seq_operations status_op = {
.start = r_start,
.next = r_next,
.stop = r_stop,
return 0;
}
-static struct seq_operations x25_seq_route_ops = {
+static const struct seq_operations x25_seq_route_ops = {
.start = x25_seq_route_start,
.next = x25_seq_route_next,
.stop = x25_seq_route_stop,
.show = x25_seq_route_show,
};
-static struct seq_operations x25_seq_socket_ops = {
+static const struct seq_operations x25_seq_socket_ops = {
.start = x25_seq_socket_start,
.next = x25_seq_socket_next,
.stop = x25_seq_socket_stop,
.show = x25_seq_socket_show,
};
-static struct seq_operations x25_seq_forward_ops = {
+static const struct seq_operations x25_seq_forward_ops = {
.start = x25_seq_forward_start,
.next = x25_seq_forward_next,
.stop = x25_seq_forward_stop,
return x;
}
+struct xfrm_state *
+xfrm_stateonly_find(xfrm_address_t *daddr, xfrm_address_t *saddr,
+ unsigned short family, u8 mode, u8 proto, u32 reqid)
+{
+ unsigned int h = xfrm_dst_hash(daddr, saddr, reqid, family);
+ struct xfrm_state *rx = NULL, *x = NULL;
+ struct hlist_node *entry;
+
+ spin_lock(&xfrm_state_lock);
+ hlist_for_each_entry(x, entry, xfrm_state_bydst+h, bydst) {
+ if (x->props.family == family &&
+ x->props.reqid == reqid &&
+ !(x->props.flags & XFRM_STATE_WILDRECV) &&
+ xfrm_state_addr_check(x, daddr, saddr, family) &&
+ mode == x->props.mode &&
+ proto == x->id.proto &&
+ x->km.state == XFRM_STATE_VALID) {
+ rx = x;
+ break;
+ }
+ }
+
+ if (rx)
+ xfrm_state_hold(rx);
+ spin_unlock(&xfrm_state_lock);
+
+
+ return rx;
+}
+EXPORT_SYMBOL(xfrm_stateonly_find);
+
static void __xfrm_state_insert(struct xfrm_state *x)
{
unsigned int h;
goto err_irq;
}
- pci_read_config_byte(pci_dev, PCI_REVISION_ID, &card->chiprev);
+ card->chiprev = pci_dev->revision;
pci_read_config_word(pci_dev, PCI_SUBSYSTEM_ID, &card->model);
printk(KERN_INFO "emu10k1: %s rev %d model %#04x found, IO at %#04lx-%#04lx, IRQ %d\n",
s->irq = pcidev->irq;
s->vendor = pcidev->vendor;
s->device = pcidev->device;
- pci_read_config_byte(pcidev, PCI_REVISION_ID, &s->rev);
+ s->rev = pcidev->revision;
s->codec->private_data = s;
s->codec->id = 0;
s->codec->codec_read = rdcodec;
codec->card = card;
codec->pci = pci;
codec->irq = -1;
- pci_read_config_byte(pci, PCI_REVISION_ID, &codec->revision);
+ codec->revision = pci->revision;
codec->spdif_support = spdif_support;
if (pcm_streams < 1)
{
struct snd_card *card;
struct atiixp *chip;
- unsigned char revision;
int err;
card = snd_card_new(index, id, THIS_MODULE, 0);
if (card == NULL)
return -ENOMEM;
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
-
strcpy(card->driver, spdif_aclink ? "ATIIXP" : "ATIIXP-SPDMA");
strcpy(card->shortname, "ATI IXP");
if ((err = snd_atiixp_create(card, pci, &chip)) < 0)
snd_atiixp_chip_start(chip);
snprintf(card->longname, sizeof(card->longname),
- "%s rev %x with %s at %#lx, irq %i", card->shortname, revision,
+ "%s rev %x with %s at %#lx, irq %i", card->shortname,
+ pci->revision,
chip->ac97[0] ? snd_ac97_get_short_name(chip->ac97[0]) : "?",
chip->addr, chip->irq);
{
struct snd_card *card;
struct atiixp_modem *chip;
- unsigned char revision;
int err;
card = snd_card_new(index, id, THIS_MODULE, 0);
if (card == NULL)
return -ENOMEM;
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
-
strcpy(card->driver, "ATIIXP-MODEM");
strcpy(card->shortname, "ATI IXP Modem");
if ((err = snd_atiixp_create(card, pci, &chip)) < 0)
snd_atiixp_chip_start(chip);
sprintf(card->longname, "%s rev %x at 0x%lx, irq %i",
- card->shortname, revision, chip->addr, chip->irq);
+ card->shortname, pci->revision, chip->addr, chip->irq);
if ((err = snd_card_register(card)) < 0)
goto __error;
snd_card_free(card);
return err;
}
- if ((err = pci_read_config_byte(pci, PCI_REVISION_ID,
- &(chip->rev))) < 0) {
- snd_card_free(card);
- return err;
- }
+ chip->rev = pci->revision;
#ifdef CHIP_AU8830
if ((chip->rev) != 0xfe && (chip->rev) != 0xfa) {
printk(KERN_ALERT
struct resource *res_port;
int irq;
- unsigned char revision; /* chip revision */
unsigned int serial; /* serial number */
unsigned short model; /* subsystem id */
}
pci_set_master(pci);
- /* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, &chip->revision);
+ /* read serial */
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
#if 1
printk(KERN_INFO "snd-ca0106: Model %04x Rev %08x Serial %08x\n", chip->model,
- chip->revision, chip->serial);
+ pci->revision, chip->serial);
#endif
strcpy(card->driver, "CA0106");
strcpy(card->shortname, "CA0106");
struct snd_emu10k1 *emu;
int idx, err;
int is_audigy;
- unsigned char revision;
unsigned int silent_page;
const struct snd_emu_chip_details *c;
static struct snd_device_ops ops = {
emu->synth = NULL;
emu->get_synth_voice = NULL;
/* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
- emu->revision = revision;
+ emu->revision = pci->revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &emu->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &emu->model);
snd_printdd("vendor=0x%x, device=0x%x, subsystem_vendor_id=0x%x, subsystem_id=0x%x\n",pci->vendor, pci->device, emu->serial, emu->model);
pci_set_master(pci);
/* read revision & serial */
- pci_read_config_byte(pci, PCI_REVISION_ID, &chip->revision);
+ chip->revision = pci->revision;
pci_read_config_dword(pci, PCI_SUBSYSTEM_VENDOR_ID, &chip->serial);
pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &chip->model);
snd_printk(KERN_INFO "Model %04x Rev %08x Serial %08x\n", chip->model,
struct ensoniq ** rensoniq)
{
struct ensoniq *ensoniq;
- unsigned char cmdb;
int err;
static struct snd_device_ops ops = {
.dev_free = snd_ensoniq_dev_free,
}
#endif
pci_set_master(pci);
- pci_read_config_byte(pci, PCI_REVISION_ID, &cmdb);
- ensoniq->rev = cmdb;
+ ensoniq->rev = pci->revision;
#ifdef CHIP1370
#if 0
ensoniq->ctrl = ES_1370_CDC_EN | ES_1370_SERR_DISABLE |
struct fm801 ** rchip)
{
struct fm801 *chip;
- unsigned char rev;
int err;
static struct snd_device_ops ops = {
.dev_free = snd_fm801_dev_free,
pci_set_master(pci);
}
- pci_read_config_byte(pci, PCI_REVISION_ID, &rev);
- if (rev >= 0xb1) /* FM801-AU */
+ if (pci->revision >= 0xb1) /* FM801-AU */
chip->multichannel = 1;
snd_fm801_chip_init(chip, 0);
{
struct snd_card *card;
struct via82xx *chip;
- unsigned char revision;
int chip_type = 0, card_type;
unsigned int i;
int err;
return -ENOMEM;
card_type = pci_id->driver_data;
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
switch (card_type) {
case TYPE_CARD_VIA686:
strcpy(card->driver, "VIA686A");
- sprintf(card->shortname, "VIA 82C686A/B rev%x", revision);
+ sprintf(card->shortname, "VIA 82C686A/B rev%x", pci->revision);
chip_type = TYPE_VIA686;
break;
case TYPE_CARD_VIA8233:
chip_type = TYPE_VIA8233;
- sprintf(card->shortname, "VIA 823x rev%x", revision);
+ sprintf(card->shortname, "VIA 823x rev%x", pci->revision);
for (i = 0; i < ARRAY_SIZE(via823x_cards); i++) {
- if (revision == via823x_cards[i].revision) {
+ if (pci->revision == via823x_cards[i].revision) {
chip_type = via823x_cards[i].type;
strcpy(card->shortname, via823x_cards[i].name);
break;
}
if (chip_type != TYPE_VIA8233A) {
if (dxs_support == VIA_DXS_AUTO)
- dxs_support = check_dxs_list(pci, revision);
+ dxs_support = check_dxs_list(pci, pci->revision);
/* force to use VIA8233 or 8233A model according to
* dxs_support module option
*/
}
if (chip_type == TYPE_VIA8233A)
strcpy(card->driver, "VIA8233A");
- else if (revision >= VIA_REV_8237)
+ else if (pci->revision >= VIA_REV_8237)
strcpy(card->driver, "VIA8237"); /* no slog assignment */
else
strcpy(card->driver, "VIA8233");
goto __error;
}
- if ((err = snd_via82xx_create(card, pci, chip_type, revision,
+ if ((err = snd_via82xx_create(card, pci, chip_type, pci->revision,
ac97_clock, &chip)) < 0)
goto __error;
card->private_data = chip;
{
struct snd_card *card;
struct via82xx_modem *chip;
- unsigned char revision;
int chip_type = 0, card_type;
unsigned int i;
int err;
return -ENOMEM;
card_type = pci_id->driver_data;
- pci_read_config_byte(pci, PCI_REVISION_ID, &revision);
switch (card_type) {
case TYPE_CARD_VIA82XX_MODEM:
strcpy(card->driver, "VIA82XX-MODEM");
goto __error;
}
- if ((err = snd_via82xx_create(card, pci, chip_type, revision,
+ if ((err = snd_via82xx_create(card, pci, chip_type, pci->revision,
ac97_clock, &chip)) < 0)
goto __error;
card->private_data = chip;
chip->pci = pci;
chip->irq = -1;
chip->device_id = pci->device;
- pci_read_config_byte(pci, PCI_REVISION_ID, &chip->rev);
+ chip->rev = pci->revision;
chip->reg_area_phys = pci_resource_start(pci, 0);
chip->reg_area_virt = ioremap_nocache(chip->reg_area_phys, 0x8000);
pci_set_master(pci);
git.samba.org / sfrench / cifs-2.6.git / commitdiff