Merge master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes

* master.kernel.org:/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  [GFS2] Fix Kconfig
  [DLM] fix compile warning

diff --git a/Documentation/DocBook/genericirq.tmpl b/Documentation/DocBook/genericirq.tmpl
index 0f4a4b6321e48af434af5a168baaa824e35d03d7..4215f69ce7e6368331d59d5d17d17059cb4e97ca 100644 (file)
--- a/Documentation/DocBook/genericirq.tmpl
+++ b/Documentation/DocBook/genericirq.tmpl
@@ -303,10 +303,10 @@ desc->status |= running;
 do {
        if (desc->status & masked)
                desc->chip->enable();
-       desc-status &= ~pending;
+       desc->status &= ~pending;
        handle_IRQ_event(desc->action);
 } while (status & pending);
-desc-status &= ~running;
+desc->status &= ~running;
 desc->chip->end();
                </programlisting>
                </para>

diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index c6c9a9c10d7f88b5f894990e45878acadbb2ea64..3adaace328a660fac9591e7a4b0726661dd3d832 100644 (file)
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -946,6 +946,13 @@ elevator_merged_fn         called when a request in the scheduler has been
                                scheduler for example, to reposition the request
                                if its sorting order has changed.
 
+elevator_allow_merge_fn                called whenever the block layer determines
+                               that a bio can be merged into an existing
+                               request safely. The io scheduler may still
+                               want to stop a merge at this point if it
+                               results in some sort of conflict internally,
+                               this hook allows it to do that.
+
 elevator_dispatch_fn           fills the dispatch queue with ready requests.
                                I/O schedulers are free to postpone requests by
                                not filling the dispatch queue unless @force

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index ef69c75780bf4e5ca4650411033f8711b0771fd2..25d2985171044712e864035fc5201147ba96cdb8 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1714,6 +1714,14 @@ and is between 256 and 4096 characters. It is defined in the file
        uart6850=       [HW,OSS]
                        Format: <io>,<irq>
 
+       uhci-hcd.ignore_oc=
+                       [USB] Ignore overcurrent events (default N).
+                       Some badly-designed motherboards generate lots of
+                       bogus events, for ports that aren't wired to
+                       anything.  Set this parameter to avoid log spamming.
+                       Note that genuine overcurrent events won't be
+                       reported either.
+
        usbhid.mousepoll=
                        [USBHID] The interval which mice are to be polled at.
 

diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index b3bd36668db3a4cef12a7996dfb51f78180da129..33994271cb3bcbc81caba4581be2c5ec16046946 100644 (file)
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1703,29 +1703,32 @@ platforms are moved over to use the flattened-device-tree model.
     Required properties:
 
      - device_type : has to be "rom"
-     - compatible : Should specify what this ROM device is compatible with
-       (i.e. "onenand"). Currently, this is most likely to be "direct-mapped"
-       (which corresponds to the MTD physmap mapping driver).
-     - regs : Offset and length of the register set (or memory mapping) for
+     - compatible : Should specify what this flash device is compatible with.
+       Currently, this is most likely to be "direct-mapped" (which
+       corresponds to the MTD physmap mapping driver).
+     - reg : Offset and length of the register set (or memory mapping) for
        the device.
+     - bank-width : Width of the flash data bus in bytes. Required
+       for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
 
     Recommended properties :
 
-     - bank-width : Width of the flash data bus in bytes. Required
-       for the NOR flashes (compatible == "direct-mapped" and others) ONLY.
      - partitions : Several pairs of 32-bit values where the first value is
        partition's offset from the start of the device and the second one is
        partition size in bytes with LSB used to signify a read only
-       partititon (so, the parition size should always be an even number).
+       partition (so, the parition size should always be an even number).
      - partition-names : The list of concatenated zero terminated strings
        representing the partition names.
+     - probe-type : The type of probe which should be done for the chip
+       (JEDEC vs CFI actually). Valid ONLY for NOR flashes.
 
    Example:
 
        flash@ff000000 {
                device_type = "rom";
                compatible = "direct-mapped";
-               regs = <ff000000 01000000>;
+               probe-type = "CFI";
+               reg = <ff000000 01000000>;
                bank-width = <4>;
                partitions = <00000000 00f80000
                              00f80000 00080001>;

diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index 077fbe25ebf44bca5cd9c16a819faebc60849121..ccd0a953953dcc09a52288d766bff968afff3e4b 100644 (file)
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -927,7 +927,7 @@
           <informalexample>
             <programlisting>
 <![CDATA[
-  struct mychip *chip = (struct mychip *)card->private_data;
+  struct mychip *chip = card->private_data;
 ]]>
             </programlisting>
           </informalexample>
@@ -1095,7 +1095,7 @@
 
           /* release the irq */
           if (chip->irq >= 0)
-                  free_irq(chip->irq, (void *)chip);
+                  free_irq(chip->irq, chip);
           /* release the i/o ports & memory */
           pci_release_regions(chip->pci);
           /* disable the PCI entry */
@@ -1148,7 +1148,7 @@
           }
           chip->port = pci_resource_start(pci, 0);
           if (request_irq(pci->irq, snd_mychip_interrupt,
-                          IRQF_DISABLED|IRQF_SHARED, "My Chip", chip)) {
+                          IRQF_SHARED, "My Chip", chip)) {
                   printk(KERN_ERR "cannot grab irq %d\n", pci->irq);
                   snd_mychip_free(chip);
                   return -EBUSY;
@@ -1387,7 +1387,7 @@
           <programlisting>
 <![CDATA[
   if (chip->irq >= 0)
-          free_irq(chip->irq, (void *)chip);
+          free_irq(chip->irq, chip);
 ]]>
           </programlisting>
         </informalexample>

diff --git a/MAINTAINERS b/MAINTAINERS
index dea5b2a6de0a8becde3fdba5e0c48f7cfcd0917c..13902cbe56baa37743af5a62616edb3807a9f54f 100644 (file)
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1277,6 +1277,12 @@ L:       linux-nvidia@lists.surfsouth.com
 W:     http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
 S:     Maintained
 
+HID CORE LAYER
+P:     Jiri Kosina
+M:     jkosina@suse.cz
+L:     linux-input@atrey.karlin.mff.cuni.cz
+S:     Maintained
+
 HIGH-SPEED SCC DRIVER FOR AX.25
 P:     Klaus Kudielka
 M:     klaus.kudielka@ieee.org
@@ -3124,7 +3130,7 @@ USB EHCI DRIVER
 P:     David Brownell
 M:     dbrownell@users.sourceforge.net
 L:     linux-usb-devel@lists.sourceforge.net
-S:     Maintained
+S:     Odd Fixes
 
 USB ET61X[12]51 DRIVER
 P:     Luca Risolia
@@ -3177,11 +3183,11 @@ S:      Maintained
 W:     http://www.one-eyed-alien.net/~mdharm/linux-usb/
 
 USB OHCI DRIVER
-P:     Roman Weissgaerber
-M:     weissg@vienna.at
+P:     David Brownell
+M:     dbrownell@users.sourceforge.net
 L:     linux-usb-users@lists.sourceforge.net
 L:     linux-usb-devel@lists.sourceforge.net
-S:     Maintained
+S:     Odd Fixes
 
 USB OPTION-CARD DRIVER
 P:     Matthias Urlichs

diff --git a/Makefile b/Makefile
index dc82462b68ba09974c872d7a7059c2656ffbf4e5..4a47203879369d76a655ae30caf5eceaf4daed07 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -496,11 +496,6 @@ else
 CFLAGS         += -fomit-frame-pointer
 endif
 
-ifdef CONFIG_UNWIND_INFO
-CFLAGS         += -fasynchronous-unwind-tables
-LDFLAGS_vmlinux        += --eh-frame-hdr
-endif
-
 ifdef CONFIG_DEBUG_INFO
 CFLAGS         += -g
 endif

diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index f8a66b72ad5df9ffcbcf2eb994dfb4d6df11fc20..24a701ab33e5fce33d68356bde6f57ebd2d02fc0 100644 (file)
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1-git9
-# Sat Jul 15 15:08:10 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:24 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -28,18 +32,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -48,12 +56,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -71,7 +79,10 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -103,7 +114,9 @@ CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -127,6 +140,7 @@ CONFIG_CRUNCH=y
 #
 CONFIG_MACH_ADSSPHERE=y
 CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9302A=y
 CONFIG_MACH_EDB9312=y
 CONFIG_MACH_EDB9315=y
 CONFIG_MACH_EDB9315A=y
@@ -138,12 +152,14 @@ CONFIG_MACH_TS72XX=y
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -230,6 +246,7 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 CONFIG_NET_KEY=y
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -250,13 +267,29 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
@@ -283,7 +316,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -330,7 +362,7 @@ CONFIG_MTD_REDBOOT_PARTS=y
 CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 
 #
@@ -342,6 +374,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -430,7 +463,7 @@ CONFIG_MTD_NAND_IDS=y
 #
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_UB is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_BLK_DEV_INITRD is not set
@@ -442,6 +475,8 @@ CONFIG_MTD_NAND_IDS=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 # CONFIG_SCSI_PROC_FS is not set
 
 #
@@ -460,22 +495,28 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
 #
 # CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_DEBUG is not set
 
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
+
 #
 # Multi-device support (RAID and LVM)
 #
@@ -513,6 +554,7 @@ CONFIG_NETDEVICES=y
 #
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+CONFIG_EP93XX_ETH=y
 # CONFIG_SMC91X is not set
 # CONFIG_DM9000 is not set
 
@@ -607,17 +649,12 @@ CONFIG_EP93XX_WATCHDOG=y
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -645,7 +682,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # CONFIG_SENSORS_DS1337 is not set
 # CONFIG_SENSORS_DS1374 is not set
-# CONFIG_SENSORS_EEPROM is not set
+CONFIG_SENSORS_EEPROM=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
@@ -664,6 +701,7 @@ CONFIG_I2C_DEBUG_CHIP=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -697,12 +735,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -711,6 +752,7 @@ CONFIG_HWMON=y
 #
 # Misc devices
 #
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
@@ -729,7 +771,6 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -742,6 +783,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -763,6 +805,7 @@ CONFIG_USB_DEBUG=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -797,12 +840,12 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
 # USB Input Devices
 #
-# CONFIG_USB_HID is not set
 
 #
 # USB HID Boot Protocol drivers
@@ -821,6 +864,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 # CONFIG_USB_MON is not set
 
@@ -834,8 +878,8 @@ CONFIG_USB_RTL8150=y
 CONFIG_USB_SERIAL=y
 CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_GENERIC is not set
+# CONFIG_USB_SERIAL_AIRCABLE is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
@@ -857,6 +901,8 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
 # CONFIG_USB_SERIAL_NAVMAN is not set
 CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_SERIAL_HP4X is not set
@@ -867,12 +913,14 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_SERIAL_XIRCOM is not set
 # CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
 
 #
 # USB Miscellaneous drivers
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -880,11 +928,12 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -908,6 +957,7 @@ CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
 CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
 
 #
 # RTC interfaces
@@ -921,7 +971,7 @@ CONFIG_RTC_INTF_DEV=y
 # RTC drivers
 #
 # CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_DS1307 is not set
+CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
@@ -943,12 +993,14 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -980,8 +1032,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -1101,6 +1155,11 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1110,8 +1169,11 @@ CONFIG_NLS_ISO8859_1=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1128,10 +1190,9 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
@@ -1150,13 +1211,10 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1164,3 +1222,4 @@ CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index f6e46193fd26df1747b97b7504e4c69db81aba3a..43c4a37e92473caec13518cb7dc15b728610ca4f 100644 (file)
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19
-# Fri Dec  1 10:51:01 2006
+# Linux kernel version: 2.6.20-rc1-git5
+# Tue Dec 19 21:38:01 2006
 #
 CONFIG_ARM=y
 # CONFIG_GENERIC_TIME is not set
@@ -11,6 +11,8 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -39,6 +41,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -77,7 +80,9 @@ CONFIG_KMOD=y
 # Block layer
 #
 CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -154,11 +159,13 @@ CONFIG_IO_36=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_IWMMXT is not set
 
 #
 # Bus support
 #
 CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -259,9 +266,23 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_IPV6 is not set
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
@@ -433,7 +454,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=2
@@ -448,6 +469,7 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
@@ -467,6 +489,7 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
 # SCSI Transports
@@ -510,6 +533,7 @@ CONFIG_SCSI_SAS_ATTRS=y
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -605,6 +629,7 @@ CONFIG_E1000_NAPI=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -711,10 +736,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -820,6 +841,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
@@ -830,6 +852,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -882,6 +905,11 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+
 #
 # USB support
 #
@@ -970,6 +998,7 @@ CONFIG_RAMFS=y
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+CONFIG_ECRYPT_FS=y
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1091,6 +1120,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1103,28 +1137,68 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_USER=y
 
 #
 # Security options
 #
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1132,3 +1206,4 @@ CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index b275c53728ec2fd66dd4579851d7a9d306a140b7..7909a555706d8e77788e1b7f685e24a46439f184 100644 (file)
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc7
-# Tue Sep 19 00:30:18 2006
+# Linux kernel version: 2.6.20-rc1-git5
+# Tue Dec 19 21:37:52 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -29,18 +32,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -49,12 +56,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -72,7 +79,10 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -106,6 +116,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IMX is not set
 CONFIG_ARCH_IOP32X=y
 # CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -141,17 +152,22 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
 # CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
 CONFIG_XSCALE_PMU=y
 
 #
 # Bus support
 #
 CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -225,6 +241,7 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -246,13 +263,29 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
@@ -279,7 +312,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -338,6 +370,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -419,9 +452,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_BLK_DEV_DAC960 is not set
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
@@ -440,6 +475,8 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -458,14 +495,16 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -478,26 +517,84 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+CONFIG_ATA=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+# CONFIG_SATA_MV is not set
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+CONFIG_SATA_SIL=y
+# CONFIG_SATA_SIL24 is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -512,6 +609,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
 # CONFIG_DM_CRYPT is not set
 # CONFIG_DM_SNAPSHOT is not set
 # CONFIG_DM_MIRROR is not set
@@ -612,6 +710,7 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -620,6 +719,7 @@ CONFIG_R8169=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -654,6 +754,7 @@ CONFIG_R8169=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -725,10 +826,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -736,7 +833,6 @@ CONFIG_HW_RANDOM=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -801,6 +897,7 @@ CONFIG_I2C_IOP3XX=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -834,15 +931,18 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -851,6 +951,8 @@ CONFIG_HWMON=y
 #
 # Misc devices
 #
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
@@ -869,12 +971,12 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
@@ -894,6 +996,11 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+
 #
 # USB support
 #
@@ -909,6 +1016,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -946,6 +1054,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -984,6 +1093,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1001,6 +1111,7 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
@@ -1008,12 +1119,13 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 
 #
 # USB DSL modem support
@@ -1045,6 +1157,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1056,6 +1169,7 @@ CONFIG_XFS_FS=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1084,8 +1198,10 @@ CONFIG_DNOTIFY=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -1095,6 +1211,7 @@ CONFIG_RAMFS=y
 #
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
+CONFIG_ECRYPT_FS=y
 # CONFIG_HFS_FS is not set
 # CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
@@ -1129,7 +1246,7 @@ CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
 # CONFIG_NFSD_V3_ACL is not set
 # CONFIG_NFSD_V4 is not set
-# CONFIG_NFSD_TCP is not set
+CONFIG_NFSD_TCP=y
 CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
@@ -1171,6 +1288,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_NLS is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1180,8 +1302,11 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1197,10 +1322,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
 # CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
@@ -1211,13 +1335,48 @@ CONFIG_DEBUG_LL=y
 #
 # Security options
 #
-# CONFIG_KEYS is not set
+CONFIG_KEYS=y
+CONFIG_KEYS_DEBUG_PROC_KEYS=y
 # CONFIG_SECURITY is not set
 
 #
 # Cryptographic options
 #
-# CONFIG_CRYPTO is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=y
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_WP512=y
+CONFIG_CRYPTO_TGR192=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_LRW=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_BLOWFISH=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+CONFIG_CRYPTO_SERPENT=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_CAST5=y
+CONFIG_CRYPTO_CAST6=y
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_KHAZAD=y
+CONFIG_CRYPTO_ANUBIS=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Hardware crypto devices
@@ -1226,10 +1385,12 @@ CONFIG_DEBUG_LL=y
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index 848e3ace906965ed214a11eabcad3e0cde55ed1d..fa271bce8ff7de55170a6bfa283bf1670977017d 100644 (file)
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc7
-# Tue Sep 19 00:30:42 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:34 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -29,18 +32,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
-CONFIG_SYSCTL=y
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -49,12 +56,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -72,7 +79,10 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -106,6 +116,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP32X is not set
 CONFIG_ARCH_IOP33X=y
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -139,17 +150,22 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
 # CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
 CONFIG_XSCALE_PMU=y
 
 #
 # Bus support
 #
 CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -223,6 +239,7 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -244,13 +261,29 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
@@ -277,7 +310,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -336,6 +368,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -423,7 +456,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_BLK_DEV_UMEM is not set
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
@@ -443,6 +476,8 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -461,14 +496,16 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -481,26 +518,34 @@ CONFIG_CHR_DEV_SG=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -515,6 +560,7 @@ CONFIG_MD_RAID1=y
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_DEBUG is not set
 # CONFIG_DM_CRYPT is not set
 # CONFIG_DM_SNAPSHOT is not set
 # CONFIG_DM_MIRROR is not set
@@ -580,6 +626,7 @@ CONFIG_E1000_NAPI=y
 # CONFIG_SK98LIN is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -588,6 +635,7 @@ CONFIG_E1000_NAPI=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -622,6 +670,7 @@ CONFIG_E1000_NAPI=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -693,10 +742,6 @@ CONFIG_HW_RANDOM=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -704,7 +749,6 @@ CONFIG_HW_RANDOM=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -769,6 +813,7 @@ CONFIG_I2C_IOP3XX=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -802,15 +847,18 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -819,6 +867,8 @@ CONFIG_HWMON=y
 #
 # Misc devices
 #
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
@@ -837,7 +887,6 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -862,6 +911,11 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+
 #
 # USB support
 #
@@ -900,6 +954,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -911,6 +966,7 @@ CONFIG_XFS_FS=y
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
 # CONFIG_XFS_RT is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -939,8 +995,10 @@ CONFIG_DNOTIFY=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -1018,6 +1076,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_NLS is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1027,8 +1090,11 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1044,10 +1110,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
 # CONFIG_FORCED_INLINING is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
@@ -1066,10 +1131,6 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #
@@ -1078,3 +1139,4 @@ CONFIG_DEBUG_LL=y
 # CONFIG_CRC32 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index bbd2dcf91e521d4179f3ed68644177188c5911e1..f8f9793b526f243187ec24754f8fcb6bf7422506 100644 (file)
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul  9 15:28:50 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:39 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -28,17 +32,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -47,12 +56,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -70,7 +79,10 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -102,7 +114,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_IXP23XX is not set
@@ -143,24 +157,28 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_IWMMXT is not set
 CONFIG_XSCALE_PMU=y
 
 #
 # Bus support
 #
 CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
 #
-# CONFIG_PCCARD is not set
 
 #
 # Kernel Features
@@ -228,6 +246,7 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -248,13 +267,29 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
@@ -281,7 +316,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -308,7 +342,6 @@ CONFIG_TCP_CONG_BIC=y
 #
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
-# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
@@ -340,6 +373,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -422,11 +456,12 @@ CONFIG_MTD_IXP2000=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -436,6 +471,12 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -501,8 +542,8 @@ CONFIG_NET_PCI=y
 # CONFIG_FORCEDETH is not set
 CONFIG_CS89x0=y
 # CONFIG_DGRS is not set
-CONFIG_EEPRO100=y
-# CONFIG_E100 is not set
+# CONFIG_EEPRO100 is not set
+CONFIG_E100=y
 # CONFIG_FEALNX is not set
 # CONFIG_NATSEMI is not set
 # CONFIG_NE2K_PCI is not set
@@ -532,6 +573,7 @@ CONFIG_ENP2611_MSF_NET=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -540,6 +582,7 @@ CONFIG_ENP2611_MSF_NET=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -555,7 +598,6 @@ CONFIG_ENP2611_MSF_NET=y
 # Wan interfaces
 #
 CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
@@ -571,6 +613,7 @@ CONFIG_HDLC_PPP=y
 # CONFIG_WANXL is not set
 # CONFIG_PC300 is not set
 # CONFIG_FARSYNC is not set
+# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
 CONFIG_DLCI_COUNT=24
 CONFIG_DLCI_MAX=8
@@ -592,6 +635,7 @@ CONFIG_DLCI_MAX=8
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -673,10 +717,6 @@ CONFIG_IXP2000_WATCHDOG=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -684,7 +724,6 @@ CONFIG_IXP2000_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -749,6 +788,7 @@ CONFIG_SENSORS_EEPROM=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -782,15 +822,18 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -799,6 +842,8 @@ CONFIG_HWMON=y
 #
 # Misc devices
 #
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
@@ -817,7 +862,6 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -829,12 +873,18 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+
 #
 # USB support
 #
@@ -875,6 +925,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -882,6 +933,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -910,8 +962,10 @@ CONFIG_DNOTIFY=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -961,7 +1015,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -993,6 +1046,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_NLS is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1002,8 +1060,11 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1019,10 +1080,9 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
@@ -1041,13 +1101,10 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1055,3 +1112,4 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index 06deefaec1d280c0343b3cb4a720ed12bf719362..27cf022dd807195f5703910fcc7d74164983510f 100644 (file)
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul  9 14:13:35 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:45 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -28,17 +32,22 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_BSD_PROCESS_ACCT_V3 is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -47,12 +56,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -70,7 +79,10 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -102,7 +114,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP23XX=y
@@ -137,6 +151,8 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 CONFIG_IO_36=y
 
 #
@@ -144,11 +160,15 @@ CONFIG_IO_36=y
 #
 # CONFIG_ARM_THUMB is not set
 CONFIG_CPU_BIG_ENDIAN=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_IWMMXT is not set
 
 #
 # Bus support
 #
 CONFIG_PCI=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -222,6 +242,7 @@ CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -242,13 +263,29 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
@@ -275,7 +312,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -334,6 +370,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -418,12 +455,13 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_SX8 is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -432,6 +470,7 @@ CONFIG_BLK_DEV_INITRD=y
 # ATA/ATAPI/MFM/RLL support
 #
 CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
 CONFIG_BLK_DEV_IDE=y
 
 #
@@ -455,7 +494,6 @@ CONFIG_BLK_DEV_IDEPCI=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 # CONFIG_BLK_DEV_GENERIC is not set
 # CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 # CONFIG_IDEDMA_PCI_AUTO is not set
@@ -469,6 +507,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_CS5530 is not set
 # CONFIG_BLK_DEV_HPT34X is not set
 # CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
 # CONFIG_BLK_DEV_SC1200 is not set
 # CONFIG_BLK_DEV_PIIX is not set
 # CONFIG_BLK_DEV_IT821X is not set
@@ -477,6 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SL82C105 is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -491,6 +531,8 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 # CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
 CONFIG_SCSI_PROC_FS=y
 
 #
@@ -509,14 +551,16 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
 
 #
-# SCSI Transport Attributes
+# SCSI Transports
 #
 # CONFIG_SCSI_SPI_ATTRS is not set
 # CONFIG_SCSI_FC_ATTRS is not set
 # CONFIG_SCSI_ISCSI_ATTRS is not set
 # CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
 
 #
 # SCSI low-level drivers
@@ -529,26 +573,34 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_SCSI_AIC7XXX is not set
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
 # CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_SCSI_ARCMSR is not set
 # CONFIG_MEGARAID_NEWGEN is not set
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_SATA is not set
 # CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
 # CONFIG_SCSI_LPFC is not set
 # CONFIG_SCSI_DC395x is not set
 # CONFIG_SCSI_DC390T is not set
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -649,6 +701,7 @@ CONFIG_E1000_NAPI=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_QLA3XXX is not set
 
 #
 # Ethernet (10000 Mbit)
@@ -657,6 +710,7 @@ CONFIG_E1000_NAPI=y
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -672,7 +726,6 @@ CONFIG_E1000_NAPI=y
 # Wan interfaces
 #
 CONFIG_WAN=y
-# CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
@@ -688,6 +741,7 @@ CONFIG_HDLC_PPP=y
 # CONFIG_WANXL is not set
 # CONFIG_PC300 is not set
 # CONFIG_FARSYNC is not set
+# CONFIG_DSCC4 is not set
 CONFIG_DLCI=y
 CONFIG_DLCI_COUNT=24
 CONFIG_DLCI_MAX=8
@@ -710,6 +764,7 @@ CONFIG_DLCI_MAX=8
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -795,10 +850,6 @@ CONFIG_WATCHDOG=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
 
@@ -806,7 +857,6 @@ CONFIG_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -870,6 +920,7 @@ CONFIG_SENSORS_EEPROM=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -903,15 +954,18 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -920,6 +974,8 @@ CONFIG_HWMON=y
 #
 # Misc devices
 #
+# CONFIG_SGI_IOC4 is not set
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
@@ -938,7 +994,6 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -951,12 +1006,18 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+
 #
 # USB support
 #
@@ -972,6 +1033,7 @@ CONFIG_USB=y
 # CONFIG_USB_DEVICEFS is not set
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -1012,6 +1074,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_SDDR55 is not set
 # CONFIG_USB_STORAGE_JUMPSHOT is not set
 # CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -1050,6 +1113,7 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -1067,19 +1131,21 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 
 #
 # USB DSL modem support
@@ -1113,6 +1179,7 @@ CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_XATTR=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 # CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4DEV_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=y
@@ -1120,6 +1187,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -1150,8 +1218,10 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -1201,7 +1271,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1272,6 +1341,11 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1281,8 +1355,11 @@ CONFIG_NLS_CODEPAGE_437=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1298,10 +1375,9 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
@@ -1320,13 +1396,10 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1334,3 +1407,4 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index e146189ab54f17925ec128c2bac27878c88188bf..a3bf5833b87ad94a9987185f333818b7916cab08 100644 (file)
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul  9 14:15:23 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:51 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
@@ -29,16 +33,21 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -47,12 +56,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -69,7 +78,10 @@ CONFIG_MODULES=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -101,7 +113,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -125,7 +139,6 @@ CONFIG_MACH_LOGICPD_PXA270=y
 # CONFIG_PXA_SHARPSL is not set
 # CONFIG_MACH_TRIZEPS4 is not set
 CONFIG_PXA27x=y
-CONFIG_IWMMXT=y
 
 #
 # Processor Type
@@ -136,11 +149,15 @@ CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
 # CONFIG_ARM_THUMB is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
 
 #
@@ -217,6 +234,7 @@ CONFIG_NET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -237,13 +255,29 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
@@ -270,7 +304,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -329,6 +362,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -410,7 +444,7 @@ CONFIG_MTD_CFI_UTIL=y
 #
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
@@ -447,6 +481,12 @@ CONFIG_BLK_DEV_IDEDISK=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -526,6 +566,7 @@ CONFIG_SMC91X=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -548,6 +589,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -600,17 +642,12 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -626,6 +663,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -634,11 +672,14 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
 #
 # Misc devices
 #
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
@@ -657,7 +698,6 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -679,6 +719,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
 # CONFIG_FB_PXA_PARAMETERS is not set
+# CONFIG_FB_MBX is not set
 # CONFIG_FB_VIRTUAL is not set
 
 #
@@ -725,7 +766,6 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # Generic devices
 #
 CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_AC97_BUS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
 # CONFIG_SND_SERIAL_U16550 is not set
@@ -741,6 +781,12 @@ CONFIG_SND_PXA2XX_AC97=y
 # Open Sound System
 #
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
+
+#
+# HID Devices
+#
+CONFIG_HID=y
 
 #
 # USB support
@@ -777,10 +823,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -811,6 +859,7 @@ CONFIG_FAT_DEFAULT_CODEPAGE=437
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
@@ -860,7 +909,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -916,6 +964,11 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -925,8 +978,11 @@ CONFIG_NLS_ISO8859_1=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -942,10 +998,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
@@ -964,13 +1019,10 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -978,3 +1030,4 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index 0498ebd7d5de8bb59506c4b7c09c7b7c423342d4..650a248613e5afc6b0d838646d42ed04d6aabb0c 100644 (file)
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc1
-# Sun Jul  9 14:16:20 2006
+# Linux kernel version: 2.6.20-rc1
+# Sat Dec 16 06:05:18 2006
 #
 CONFIG_ARM=y
+# CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -28,16 +32,21 @@ CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
+# CONFIG_IPC_NS is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
+# CONFIG_UTS_NS is not set
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
-CONFIG_UID16=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
 CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -46,12 +55,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
-CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
 CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_RT_MUTEXES=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -69,7 +78,10 @@ CONFIG_KMOD=y
 #
 # Block layer
 #
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -101,7 +113,9 @@ CONFIG_ARCH_AT91=y
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
 # CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
@@ -118,10 +132,6 @@ CONFIG_ARCH_AT91=y
 #
 # Atmel AT91 System-on-Chip
 #
-
-#
-# Atmel AT91 Processors
-#
 CONFIG_ARCH_AT91RM9200=y
 # CONFIG_ARCH_AT91SAM9260 is not set
 # CONFIG_ARCH_AT91SAM9261 is not set
@@ -139,6 +149,10 @@ CONFIG_MACH_ONEARM=y
 # CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_KAFA is not set
 
+#
+# AT91 Board Options
+#
+
 #
 # AT91 Feature Selections
 #
@@ -149,12 +163,14 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 #
 CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
-CONFIG_CPU_32v4=y
+CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
 CONFIG_CPU_CACHE_V4WT=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
@@ -251,6 +267,7 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -271,13 +288,29 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_BIC=y
-# CONFIG_IPV6 is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+# CONFIG_IPV6_SIT is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
@@ -304,7 +337,6 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 
@@ -360,6 +392,7 @@ CONFIG_MTD_BLOCK=y
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
 # CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -438,11 +471,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0
 #
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_NBD=y
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -457,6 +491,12 @@ CONFIG_BLK_DEV_INITRD=y
 #
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
+# CONFIG_SCSI_NETLINK is not set
+
+#
+# Serial ATA (prod) and Parallel ATA (experimental) drivers
+#
+# CONFIG_ATA is not set
 
 #
 # Multi-device support (RAID and LVM)
@@ -541,6 +581,7 @@ CONFIG_ARM_AT91_ETHER=y
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
 
 #
 # Userland interfaces
@@ -618,10 +659,6 @@ CONFIG_AT91RM9200_WATCHDOG=y
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
-#
-# Ftape, the floppy tape device driver
-#
-
 #
 # PCMCIA character devices
 #
@@ -634,7 +671,6 @@ CONFIG_AT91RM9200_WATCHDOG=y
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -652,6 +688,7 @@ CONFIG_I2C_CHARDEV=y
 #
 # I2C Hardware Bus support
 #
+# CONFIG_I2C_AT91 is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
@@ -681,6 +718,7 @@ CONFIG_I2C_CHARDEV=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -714,12 +752,15 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_LM92 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
@@ -728,6 +769,7 @@ CONFIG_HWMON=y
 #
 # Misc devices
 #
+# CONFIG_TIFM_CORE is not set
 
 #
 # LED devices
@@ -746,7 +788,6 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -759,12 +800,18 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=y
+
 #
 # USB support
 #
@@ -780,6 +827,7 @@ CONFIG_USB_DEBUG=y
 CONFIG_USB_DEVICEFS=y
 # CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
 # CONFIG_USB_OTG is not set
 
 #
@@ -804,7 +852,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # may also be needed; see USB_STORAGE Help for more information
 #
-# CONFIG_USB_STORAGE is not set
 # CONFIG_USB_LIBUSUAL is not set
 
 #
@@ -842,6 +889,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_KAWETH is not set
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
 # CONFIG_USB_USBNET is not set
 CONFIG_USB_MON=y
 
@@ -859,18 +907,20 @@ CONFIG_USB_MON=y
 #
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
 # CONFIG_USB_AUERSWALD is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGETKIT is not set
-# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_TEST is not set
 
 #
@@ -897,6 +947,7 @@ CONFIG_USB_AT91=y
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
 
 #
 # MMC/SD Card support
@@ -904,7 +955,8 @@ CONFIG_USB_AT91=y
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-CONFIG_MMC_AT91RM9200=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_TIFM_SD is not set
 
 #
 # Real Time Clock
@@ -919,10 +971,12 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -951,8 +1005,10 @@ CONFIG_DNOTIFY=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
 # CONFIG_CONFIGFS_FS is not set
@@ -995,7 +1051,6 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1012,6 +1067,11 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_NLS is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -1021,8 +1081,11 @@ CONFIG_MSDOS_PARTITION=y
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_MUST_CHECK=y
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1038,10 +1101,9 @@ CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_LIST is not set
 CONFIG_FRAME_POINTER=y
-# CONFIG_UNWIND_INFO is not set
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
 CONFIG_DEBUG_USER=y
@@ -1060,16 +1122,14 @@ CONFIG_DEBUG_LL=y
 #
 # CONFIG_CRYPTO is not set
 
-#
-# Hardware crypto devices
-#
-
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index e8f74363328ce6a40fb43084677cda482436284a..f7598cbc7ec5a788cf6f032a548372682f679feb 100644 (file)
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -110,7 +110,7 @@
                CALL(sys_ni_syscall)            /* was sys_profil */
                CALL(sys_statfs)
 /* 100 */      CALL(sys_fstatfs)
-               CALL(sys_ni_syscall)
+               CALL(sys_ni_syscall)            /* sys_ioperm */
                CALL(OBSOLETE(ABI(sys_socketcall, sys_oabi_socketcall)))
                CALL(sys_syslog)
                CALL(sys_setitimer)
@@ -132,7 +132,7 @@
 /* 120 */      CALL(sys_clone_wrapper)
                CALL(sys_setdomainname)
                CALL(sys_newuname)
-               CALL(sys_ni_syscall)
+               CALL(sys_ni_syscall)            /* modify_ldt */
                CALL(sys_adjtimex)
 /* 125 */      CALL(sys_mprotect)
                CALL(sys_sigprocmask)
@@ -146,7 +146,7 @@
                CALL(sys_bdflush)
 /* 135 */      CALL(sys_sysfs)
                CALL(sys_personality)
-               CALL(sys_ni_syscall)            /* CALL(_sys_afs_syscall) */
+               CALL(sys_ni_syscall)            /* reserved for afs_syscall */
                CALL(sys_setfsuid16)
                CALL(sys_setfsgid16)
 /* 140 */      CALL(sys_llseek)
@@ -175,7 +175,7 @@
                CALL(sys_arm_mremap)
                CALL(sys_setresuid16)
 /* 165 */      CALL(sys_getresuid16)
-               CALL(sys_ni_syscall)
+               CALL(sys_ni_syscall)            /* vm86 */
                CALL(sys_ni_syscall)            /* was sys_query_module */
                CALL(sys_poll)
                CALL(sys_nfsservctl)
@@ -197,8 +197,8 @@
 /* 185 */      CALL(sys_capset)
                CALL(sys_sigaltstack_wrapper)
                CALL(sys_sendfile)
-               CALL(sys_ni_syscall)
-               CALL(sys_ni_syscall)
+               CALL(sys_ni_syscall)            /* getpmsg */
+               CALL(sys_ni_syscall)            /* putpmsg */
 /* 190 */      CALL(sys_vfork_wrapper)
                CALL(sys_getrlimit)
                CALL(sys_mmap2)
@@ -344,6 +344,18 @@
                CALL(sys_readlinkat)
                CALL(sys_fchmodat)
                CALL(sys_faccessat)
+/* 335 */      CALL(sys_ni_syscall)            /* eventually pselect6 */
+               CALL(sys_ni_syscall)            /* eventually ppoll */
+               CALL(sys_unshare)
+               CALL(sys_set_robust_list)
+               CALL(sys_get_robust_list)
+/* 340 */      CALL(sys_splice)
+               CALL(sys_arm_sync_file_range)
+               CALL(sys_tee)
+               CALL(sys_vmsplice)
+               CALL(sys_move_pages)
+/* 345 */      CALL(sys_getcpu)
+               CALL(sys_ni_syscall)            /* eventually epoll_pwait */
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted

diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index cf2bd42428035079943592d45a65374f3081dd57..bbab134cd82d3fa547d72d5d2514591da9f52d92 100644 (file)
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -855,6 +855,7 @@ static const char *hwcap_str[] = {
        "edsp",
        "java",
        "iwmmxt",
+       "crunch",
        NULL
 };
 

diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 00c18d35913cb2c9a6da852fba86d67efa9fd5a4..3d4fcbc162769b9bf71f3da77b5488f15df5c50a 100644 (file)
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -328,3 +328,16 @@ asmlinkage long sys_arm_fadvise64_64(int fd, int advice,
 {
        return sys_fadvise64_64(fd, offset, len, advice);
 }
+
+/*
+ * Yet more syscall fsckage - we can't fit sys_sync_file_range's
+ * arguments into the available registers with EABI.  So, let's
+ * create an ARM specific syscall for this which has _sane_
+ * arguments.  (This incidentally also has an ABI-independent
+ * argument layout.)
+ */
+asmlinkage long sys_arm_sync_file_range(int fd, unsigned int flags,
+                                       loff_t offset, loff_t nbytes)
+{
+       return sys_sync_file_range(fd, offset, nbytes, flags);
+}

diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index d649b39711d49296423963c50e9cd2a9753f5bf0..6b26346191c040f9949094232a7cf8e072949161 100644 (file)
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -477,4 +477,8 @@ void __init ep93xx_init_devices(void)
 
        platform_device_register(&ep93xx_rtc_device);
        platform_device_register(&ep93xx_ohci_device);
+
+#ifdef CONFIG_CRUNCH
+       elf_hwcap |= HWCAP_CRUNCH;
+#endif
 }

diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index ee595786cd22bd32f7db4db242d4d3b79b87012b..2a1bbfe9896fcdf21c6183886176de0d7ea63cd9 100644 (file)
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -88,11 +88,11 @@ static struct sys_timer iq81340mc_timer = {
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
        /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-       .phys_io        = PHYS_IO,
-       .io_pg_offst    = IO_PG_OFFSET,
+       .phys_io        = IOP13XX_PMMR_PHYS_MEM_BASE,
+       .io_pg_offst    = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
        .map_io         = iop13xx_map_io,
        .init_irq       = iop13xx_init_irq,
        .timer          = &iq81340mc_timer,
-       .boot_params    = BOOT_PARAM_OFFSET,
        .init_machine   = iq81340mc_init,
 MACHINE_END

diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index 6677e14b61bf5f965c15bdda1cd60ad425b824a1..5ad2b62c9bfde0582cc614f386f80591c7e82fe8 100644 (file)
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -90,11 +90,11 @@ static struct sys_timer iq81340sc_timer = {
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
        /* Maintainer: Dan Williams <dan.j.williams@intel.com> */
-       .phys_io        = PHYS_IO,
-       .io_pg_offst    = IO_PG_OFFSET,
+       .phys_io        = IOP13XX_PMMR_PHYS_MEM_BASE,
+       .io_pg_offst    = (IOP13XX_PMMR_VIRT_MEM_BASE >> 18) & 0xfffc,
+       .boot_params    = 0x00000100,
        .map_io         = iop13xx_map_io,
        .init_irq       = iop13xx_init_irq,
        .timer          = &iq81340sc_timer,
-       .boot_params    = BOOT_PARAM_OFFSET,
        .init_machine   = iq81340sc_init,
 MACHINE_END

diff --git a/arch/arm/mach-iop13xx/irq.c b/arch/arm/mach-iop13xx/irq.c
index c4d9c8c5579c575d3b4cdc1724b71cdaf77c765e..dbbc07c38b141349f9883b78019407517cf32a33 100644 (file)
--- a/arch/arm/mach-iop13xx/irq.c
+++ b/arch/arm/mach-iop13xx/irq.c
@@ -222,25 +222,29 @@ iop13xx_irq_unmask3(unsigned int irq)
        iop13xx_cp6_restore(cp_flags);
 }
 
-static struct irqchip iop13xx_irqchip0 = {
+static struct irq_chip iop13xx_irqchip1 = {
+       .name   = "IOP13xx-1",
        .ack    = iop13xx_irq_mask0,
        .mask   = iop13xx_irq_mask0,
        .unmask = iop13xx_irq_unmask0,
 };
 
-static struct irqchip iop13xx_irqchip1 = {
+static struct irq_chip iop13xx_irqchip2 = {
+       .name   = "IOP13xx-2",
        .ack    = iop13xx_irq_mask1,
        .mask   = iop13xx_irq_mask1,
        .unmask = iop13xx_irq_unmask1,
 };
 
-static struct irqchip iop13xx_irqchip2 = {
+static struct irq_chip iop13xx_irqchip3 = {
+       .name   = "IOP13xx-3",
        .ack    = iop13xx_irq_mask2,
        .mask   = iop13xx_irq_mask2,
        .unmask = iop13xx_irq_unmask2,
 };
 
-static struct irqchip iop13xx_irqchip3 = {
+static struct irq_chip iop13xx_irqchip4 = {
+       .name   = "IOP13xx-4",
        .ack    = iop13xx_irq_mask3,
        .mask   = iop13xx_irq_mask3,
        .unmask = iop13xx_irq_unmask3,
@@ -270,15 +274,15 @@ void __init iop13xx_init_irq(void)
 
        for(i = 0; i < NR_IOP13XX_IRQS; i++) {
                if (i < 32)
-                       set_irq_chip(i, &iop13xx_irqchip0);
-               else if (i < 64)
                        set_irq_chip(i, &iop13xx_irqchip1);
-               else if (i < 96)
+               else if (i < 64)
                        set_irq_chip(i, &iop13xx_irqchip2);
-               else
+               else if (i < 96)
                        set_irq_chip(i, &iop13xx_irqchip3);
+               else
+                       set_irq_chip(i, &iop13xx_irqchip4);
 
-               set_irq_handler(i, do_level_IRQ);
+               set_irq_handler(i, handle_level_irq);
                set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
        }
 

diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c
index 3756d2ccb1a7dfc70044435f8a2394b00bf19a11..5fbeb28d04bb6bcf67ceb976e3d2fae931f6b036 100644 (file)
--- a/arch/arm/mach-iop13xx/setup.c
+++ b/arch/arm/mach-iop13xx/setup.c
@@ -337,7 +337,7 @@ void __init iop13xx_platform_init(void)
 
 #ifdef CONFIG_MTD_PHYSMAP
        iq8134x_flash_resource.end = iq8134x_flash_resource.start +
-                               iq8134x_probe_flash_size();
+                               iq8134x_probe_flash_size() - 1;
        if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
                iop13xx_devices[plat_idx++] = &iq8134x_flash;
        else

diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 9f46bf330bc8f314420e2764092d8c4602aa1792..eb4ec411312ba8684d7e6830b2be578c8abf2262 100644 (file)
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -5,6 +5,7 @@ menu "S3C24XX Implementations"
 config MACH_AML_M5900
        bool "AML M5900 Series"
        select CPU_S3C2410
+       select PM_SIMTEC if PM
        help
           Say Y here if you are using the American Microsystems M5900 Series
            <http://www.amltd.com>
@@ -12,6 +13,7 @@ config MACH_AML_M5900
 config MACH_ANUBIS
        bool "Simtec Electronics ANUBIS"
        select CPU_S3C2440
+       select PM_SIMTEC if PM
        help
          Say Y here if you are using the Simtec Electronics ANUBIS
          development system
@@ -19,6 +21,7 @@ config MACH_ANUBIS
 config MACH_OSIRIS
        bool "Simtec IM2440D20 (OSIRIS) module"
        select CPU_S3C2440
+       select PM_SIMTEC if PM
        help
          Say Y here if you are using the Simtec IM2440D20 module, also
          known as the Osiris.
@@ -26,6 +29,7 @@ config MACH_OSIRIS
 config ARCH_BAST
        bool "Simtec Electronics BAST (EB2410ITX)"
        select CPU_S3C2410
+       select PM_SIMTEC if PM
        select ISA
        help
          Say Y here if you are using the Simtec Electronics EB2410ITX
@@ -43,14 +47,13 @@ config BAST_PC104_IRQ
 
 config PM_H1940
        bool
-       depends on PM
        help
          Internal node for H1940 and related PM
 
 config ARCH_H1940
        bool "IPAQ H1940"
        select CPU_S3C2410
-       select PM_H1940
+       select PM_H1940 if PM
        help
          Say Y here if you are using the HP IPAQ H1940
 
@@ -112,6 +115,7 @@ config MACH_SMDK2413
 
 config MACH_VR1000
        bool "Thorcom VR1000"
+       select PM_SIMTEC if PM
        select CPU_S3C2410
        help
          Say Y here if you are using the Thorcom VR1000 board.
@@ -122,7 +126,7 @@ config MACH_VR1000
 config MACH_RX3715
        bool "HP iPAQ rx3715"
        select CPU_S3C2440
-       select PM_H1940
+       select PM_H1940 if PM
        help
          Say Y here if you are using the HP iPAQ rx3715.
 
@@ -156,7 +160,6 @@ config S3C2410_CLOCK
 
 config S3C2410_PM
        bool
-       depends on CONFIG_PM
        help
          Power Management code common to S3C2410 and better
 
@@ -171,7 +174,7 @@ config CPU_S3C2410
        bool
        depends on ARCH_S3C2410
        select S3C2410_CLOCK
-       select S3C2410_PM
+       select S3C2410_PM if PM
        help
          Support for S3C2410 and S3C2410A family from the S3C24XX line
          of Samsung Mobile CPUs.
@@ -186,14 +189,13 @@ config CPU_S3C2412_ONLY
 
 config S3C2412_PM
        bool
-       default y if PM
-       depends on CPU_S3C2412
        help
          Internal config node to apply S3C2412 power management
 
 config CPU_S3C2412
        bool
        depends on ARCH_S3C2410
+       select S3C2412_PM if PM
        help
          Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -207,7 +209,7 @@ config CPU_S3C2440
        bool
        depends on ARCH_S3C2410
        select S3C2410_CLOCK
-       select S3C2410_PM
+       select S3C2410_PM if PM
        select CPU_S3C244X
        help
          Support for S3C2440 Samsung Mobile CPU based systems.
@@ -216,7 +218,7 @@ config CPU_S3C2442
        bool
        depends on ARCH_S3C2420
        select S3C2410_CLOCK
-       select S3C2410_PM
+       select S3C2410_PM if PM
        select CPU_S3C244X
        help
          Support for S3C2442 Samsung Mobile CPU based systems.
@@ -300,8 +302,9 @@ config S3C2410_PM_CHECK_CHUNKSIZE
 
 config PM_SIMTEC
        bool
-       depends on PM && (ARCH_BAST || MACH_VR1000 || MACH_AML_M5900)
-       default y
+       help
+         Common power management code for systems that are
+         compatible with the Simtec style of power management
 
 config S3C2410_LOWLEVEL_UART_PORT
        int "S3C2410 UART to use for low-level messages"

diff --git a/arch/arm/mach-s3c2410/cpu.c b/arch/arm/mach-s3c2410/cpu.c
index 9d4899eddf1f26ccccc8906504c25578c11a4378..ae1f5bb63f7a809081a31a437aa983b944c66fa1 100644 (file)
--- a/arch/arm/mach-s3c2410/cpu.c
+++ b/arch/arm/mach-s3c2410/cpu.c
@@ -26,6 +26,7 @@
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/ioport.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/hardware.h>

diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index cae35ff76f339b8be674b5f10262cbcc301bed44..faccde2092d2f353617e61893218c50a263ab22c 100644 (file)
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>

diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index 01abb0ace234ad823df9ad39b90ab719f1167d4e..717322a0916bd4f9a9f5831a11db6d6cb3fecc83 100644 (file)
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/dma.c
  *
- * (c) 2003-2005,2006 Simtec Electronics
+ * Copyright (c) 2003-2005,2006 Simtec Electronics
  *     Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 DMA core

diff --git a/arch/arm/mach-s3c2410/irq.h b/arch/arm/mach-s3c2410/irq.h
index 3686a00822459b20bced746696e2681f81a46f48..e5913da3b919bb3ffbffbbf48a94c129b6e8d243 100644 (file)
--- a/arch/arm/mach-s3c2410/irq.h
+++ b/arch/arm/mach-s3c2410/irq.h
@@ -8,8 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
 */
 
 #define irqdbf(x...)

diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c
index e94cdcd965916437970151942ef26c31af8f1c6d..0fad0c2fe07b3b33d72b5d92dc2f0629dddd6934 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-anubis.c
+++ b/arch/arm/mach-s3c2410/mach-anubis.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>

diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 2968fb235f95504b800b9fe2dd3f28d40ed68ed8..b8b76757ec54a70272a9107b06f5b554a50d299f 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/dm9000.h>
 

diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index f5b98099a5d9cb1c925d060eb0b472be65078e6e..15b625eae499e2e13b0d3e61dea07a7963347520 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
@@ -37,8 +38,6 @@
 #include <asm/arch/h1940-latch.h>
 #include <asm/arch/fb.h>
 
-#include <linux/serial_core.h>
-
 #include "clock.h"
 #include "devs.h"
 #include "cpu.h"

diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 116ac31699664cc3f98eaca5a054393c9aea844b..0411e9adb54d9b208682d849859a5dd16c97f08d 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -20,6 +20,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/delay.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/kthread.h>
 
@@ -37,8 +38,6 @@
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/iic.h>
 
-#include <linux/serial_core.h>
-
 #include "s3c2410.h"
 #include "clock.h"
 #include "devs.h"

diff --git a/arch/arm/mach-s3c2410/mach-nexcoder.c b/arch/arm/mach-s3c2410/mach-nexcoder.c
index 065a1d4e860b53fd15fe8cd789917a1ffe471b26..d6dfdad8c90bbdd9d4d442dd0c64ec40086c510a 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-nexcoder.c
+++ b/arch/arm/mach-s3c2410/mach-nexcoder.c
@@ -19,6 +19,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/string.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <linux/mtd/map.h>

diff --git a/arch/arm/mach-s3c2410/mach-osiris.c b/arch/arm/mach-s3c2410/mach-osiris.c
index a4ab144e7292622d4c4968fb43c8da5544a557de..37b40850c9b9006d9caeef435fc2a08ce24ee4a6 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-osiris.c
+++ b/arch/arm/mach-s3c2410/mach-osiris.c
@@ -16,6 +16,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/serial_core.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>

diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c
index c71673fd9955e24558b9be628644cd48890fb60f..2c738b375e4d6da64359154ea3f0073f6e6a2ea9 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-otom.c
+++ b/arch/arm/mach-s3c2410/mach-otom.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>

diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index b3b0171d5052bb06f953187e57b70aa2340a2925..01c0c986d827de5d12f775aaf4abce49a7bd988e 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -35,6 +35,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>

diff --git a/arch/arm/mach-s3c2410/mach-smdk2413.c b/arch/arm/mach-s3c2410/mach-smdk2413.c
index 3a4ca7f6f7b9b7bf4d51d1053c00cf31132a2ac7..4f89abd7a6dfcd03a58365e562fe205b73414618 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-smdk2413.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2413.c
@@ -17,6 +17,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>

diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index e2205ff1b0ee97b76d9038815e6b864e77b3d93b..2b61f4ed1da410fa21449d3ce95af14c80b0c005 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -19,6 +19,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>

diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index e2eda3937ab08915ca1c98b4c3abbfb50567be9e..a382fc095110ec21b9b07563a0b140893e40db98 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -352,7 +352,7 @@ static struct platform_device vr1000_led2 = {
 
 static struct platform_device vr1000_led3 = {
        .name           = "s3c24xx_led",
-       .id             = 1,
+       .id             = 3,
        .dev            = {
                .platform_data  = &vr1000_led3_pdata,
        },

diff --git a/arch/arm/mach-s3c2410/mach-vstms.c b/arch/arm/mach-s3c2410/mach-vstms.c
index ea554e7c006e9793f829353faac57489c6a627a2..0360e1055bcd7485e1b6f8e0cfee40310644e4c4 100644 (file)
--- a/arch/arm/mach-s3c2410/mach-vstms.c
+++ b/arch/arm/mach-s3c2410/mach-vstms.c
@@ -15,6 +15,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <linux/mtd/mtd.h>

diff --git a/arch/arm/mach-s3c2410/pm-simtec.c b/arch/arm/mach-s3c2410/pm-simtec.c
index 42cd05e298f8dc5765e495712558f271ef4aa91d..619133eb716802b9002c6b44022591f44b80cddd 100644 (file)
--- a/arch/arm/mach-s3c2410/pm-simtec.c
+++ b/arch/arm/mach-s3c2410/pm-simtec.c
@@ -27,7 +27,6 @@
 #include <asm/io.h>
 
 #include <asm/arch/map.h>
-#include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-mem.h>
 

diff --git a/arch/arm/mach-s3c2410/pm.c b/arch/arm/mach-s3c2410/pm.c
index b49a0b3b72b319562dcaf4763627ee52c85ad6de..00834097eb8244567e345f62b5c1b1afe7eca175 100644 (file)
--- a/arch/arm/mach-s3c2410/pm.c
+++ b/arch/arm/mach-s3c2410/pm.c
@@ -34,6 +34,7 @@
 #include <linux/crc32.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
+#include <linux/serial_core.h>
 
 #include <asm/cacheflush.h>
 #include <asm/hardware.h>

diff --git a/arch/arm/mach-s3c2410/s3c2410-clock.c b/arch/arm/mach-s3c2410/s3c2410-clock.c
index 00abe199a08eca05ac62644f85a49666e0fbd0ee..992cc6af230e676817185742f5ad6f3e792c5af8 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2410-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2410-clock.c
@@ -30,13 +30,18 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 
+#include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-gpio.h>
 
+#include "s3c2410.h"
 #include "clock.h"
 #include "cpu.h"
 

diff --git a/arch/arm/mach-s3c2410/s3c2410-dma.c b/arch/arm/mach-s3c2410/s3c2410-dma.c
index 51e5098b32e870c65dcec8fb120a1770c0547e18..e67ba3911f111e690c9554f12182faa5e52c77f9 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2410-dma.c
+++ b/arch/arm/mach-s3c2410/s3c2410-dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/s3c2410-dma.c
  *
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *     Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 DMA selection
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
+#include <linux/serial_core.h>
 
 #include <asm/dma.h>
 #include <asm/arch/dma.h>
@@ -131,6 +132,7 @@ static int s3c2410_dma_add(struct sys_device *sysdev)
        return s3c24xx_dma_init_map(&s3c2410_dma_sel);
 }
 
+#if defined(CONFIG_CPU_S3C2410)
 static struct sysdev_driver s3c2410_dma_driver = {
        .add    = s3c2410_dma_add,
 };
@@ -141,9 +143,10 @@ static int __init s3c2410_dma_init(void)
 }
 
 arch_initcall(s3c2410_dma_init);
+#endif
 
+#if defined(CONFIG_CPU_S3C2442)
 /* S3C2442 DMA contains the same selection table as the S3C2410 */
-
 static struct sysdev_driver s3c2442_dma_driver = {
        .add    = s3c2410_dma_add,
 };
@@ -154,5 +157,5 @@ static int __init s3c2442_dma_init(void)
 }
 
 arch_initcall(s3c2442_dma_init);
-
+#endif
 

diff --git a/arch/arm/mach-s3c2410/s3c2410-pm.c b/arch/arm/mach-s3c2410/s3c2410-pm.c
index 77c6814c0f0507599c650e72d35bfd3d071b6c58..8bb6e5e21f591b8716569f562a694ac3cd797258 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2410-pm.c
+++ b/arch/arm/mach-s3c2410/s3c2410-pm.c
@@ -87,7 +87,7 @@ static void s3c2410_pm_prepare(void)
 
 }
 
-int s3c2410_pm_resume(struct sys_device *dev)
+static int s3c2410_pm_resume(struct sys_device *dev)
 {
        unsigned long tmp;
 
@@ -111,6 +111,7 @@ static int s3c2410_pm_add(struct sys_device *dev)
        return 0;
 }
 
+#if defined(CONFIG_CPU_S3C2410)
 static struct sysdev_driver s3c2410_pm_driver = {
        .add            = s3c2410_pm_add,
        .resume         = s3c2410_pm_resume,
@@ -124,7 +125,9 @@ static int __init s3c2410_pm_drvinit(void)
 }
 
 arch_initcall(s3c2410_pm_drvinit);
+#endif
 
+#if defined(CONFIG_CPU_S3C2440)
 static struct sysdev_driver s3c2440_pm_driver = {
        .add            = s3c2410_pm_add,
        .resume         = s3c2410_pm_resume,
@@ -136,7 +139,9 @@ static int __init s3c2440_pm_drvinit(void)
 }
 
 arch_initcall(s3c2440_pm_drvinit);
+#endif
 
+#if defined(CONFIG_CPU_S3C2442)
 static struct sysdev_driver s3c2442_pm_driver = {
        .add            = s3c2410_pm_add,
        .resume         = s3c2410_pm_resume,
@@ -148,3 +153,4 @@ static int __init s3c2442_pm_drvinit(void)
 }
 
 arch_initcall(s3c2442_pm_drvinit);
+#endif

diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c
index 183e4033ce617b07b9c5bff936d454e21292b47d..4cdc0d70c19f3fa6203440a6ea2f3082575c9861 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2410.c
+++ b/arch/arm/mach-s3c2410/s3c2410.c
@@ -17,6 +17,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
@@ -38,11 +39,9 @@
 /* Initial IO mappings */
 
 static struct map_desc s3c2410_iodesc[] __initdata = {
-       IODESC_ENT(USBHOST),
        IODESC_ENT(CLKPWR),
        IODESC_ENT(LCD),
        IODESC_ENT(TIMER),
-       IODESC_ENT(ADC),
        IODESC_ENT(WATCHDOG),
 };
 

diff --git a/arch/arm/mach-s3c2410/s3c2412-clock.c b/arch/arm/mach-s3c2410/s3c2412-clock.c
index c95ed3e18580a9a1db711a95f73063f433b1eebd..8f94ad83901db64ed762ba6c2c400cc8d12d1937 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2412-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2412-clock.c
@@ -30,13 +30,18 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/delay.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/map.h>
 
 #include <asm/hardware.h>
 #include <asm/io.h>
 
+#include <asm/arch/regs-serial.h>
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-gpio.h>
 
+#include "s3c2412.h"
 #include "clock.h"
 #include "cpu.h"
 
@@ -49,7 +54,7 @@
  * set the correct muxing at initialisation
 */
 
-int s3c2412_clkcon_enable(struct clk *clk, int enable)
+static int s3c2412_clkcon_enable(struct clk *clk, int enable)
 {
        unsigned int clocks = clk->ctrlbit;
        unsigned long clkcon;
@@ -556,7 +561,7 @@ struct clk_init {
        struct clk      *src_1;
 };
 
-struct clk_init clks_src[] __initdata = {
+static struct clk_init clks_src[] __initdata = {
        {
                .clk    = &clk_usysclk,
                .bit    = S3C2412_CLKSRC_USBCLK_HCLK,
@@ -619,7 +624,7 @@ static void __init s3c2412_clk_initparents(void)
 
 /* clocks to add straight away */
 
-struct clk *clks[] __initdata = {
+static struct clk *clks[] __initdata = {
        &clk_ext,
        &clk_usb_bus,
        &clk_erefclk,

diff --git a/arch/arm/mach-s3c2410/s3c2412-dma.c b/arch/arm/mach-s3c2410/s3c2412-dma.c
index 171f3706d36d051a86a6c2eba20c0ef0e42a920e..fe71a8fdb87cd55eadc2fe751e32bb05a336a392 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2412-dma.c
+++ b/arch/arm/mach-s3c2410/s3c2412-dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/s3c2412-dma.c
  *
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *     Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2412 DMA selection
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
+#include <linux/serial_core.h>
 
 #include <asm/dma.h>
 #include <asm/arch/dma.h>

diff --git a/arch/arm/mach-s3c2410/s3c2412.c b/arch/arm/mach-s3c2410/s3c2412.c
index e76431c41461f1f195fd77625da0134f77576155..2f651a811ecd5f6c513a5731274192ba28c03673 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2412.c
+++ b/arch/arm/mach-s3c2410/s3c2412.c
@@ -17,6 +17,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
 #include <asm/mach/arch.h>
@@ -60,7 +61,6 @@ static struct map_desc s3c2412_iodesc[] __initdata = {
        IODESC_ENT(CLKPWR),
        IODESC_ENT(LCD),
        IODESC_ENT(TIMER),
-       IODESC_ENT(ADC),
        IODESC_ENT(WATCHDOG),
 };
 

diff --git a/arch/arm/mach-s3c2410/s3c2440-clock.c b/arch/arm/mach-s3c2410/s3c2440-clock.c
index 15796864d0107911f01aa21dee324b760d960be0..ba13c1d079d100c9b4759b6c89039bd46cf782b5 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2440-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2440-clock.c
@@ -113,18 +113,18 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
 {
        unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
        unsigned long clkdivn;
-       struct clk *clk_h;
-       struct clk *clk_p;
-       struct clk *clk_upll;
+       struct clk *clock_h;
+       struct clk *clock_p;
+       struct clk *clock_upll;
 
        printk("S3C2440: Clock Support, DVS %s\n",
               (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
 
-       clk_p = clk_get(NULL, "pclk");
-       clk_h = clk_get(NULL, "hclk");
-       clk_upll = clk_get(NULL, "upll");
+       clock_p = clk_get(NULL, "pclk");
+       clock_h = clk_get(NULL, "hclk");
+       clock_upll = clk_get(NULL, "upll");
 
-       if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
+       if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
                printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
                return -EINVAL;
        }
@@ -132,8 +132,8 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
        /* check rate of UPLL, and if it is near 96MHz, then change
         * to using half the UPLL rate for the system */
 
-       if (clk_get_rate(clk_upll) > (94 * MHZ)) {
-               clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
+       if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+               clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
 
                mutex_lock(&clocks_mutex);
 
@@ -144,9 +144,9 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
                mutex_unlock(&clocks_mutex);
        }
 
-       s3c2440_clk_cam.parent = clk_h;
-       s3c2440_clk_ac97.parent = clk_p;
-       s3c2440_clk_cam_upll.parent = clk_upll;
+       s3c2440_clk_cam.parent = clock_h;
+       s3c2440_clk_ac97.parent = clock_p;
+       s3c2440_clk_cam_upll.parent = clock_upll;
 
        s3c24xx_register_clock(&s3c2440_clk_ac97);
        s3c24xx_register_clock(&s3c2440_clk_cam);

diff --git a/arch/arm/mach-s3c2410/s3c2440-dma.c b/arch/arm/mach-s3c2410/s3c2440-dma.c
index 11e109c84a15970e432e7060df1fbc9fe481b4fe..47b861b9443d7d0a864e0f3d367987e8c0e251de 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2440-dma.c
+++ b/arch/arm/mach-s3c2410/s3c2440-dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/s3c2440-dma.c
  *
- * (c) 2006 Simtec Electronics
+ * Copyright (c) 2006 Simtec Electronics
  *     Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2440 DMA selection
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/sysdev.h>
+#include <linux/serial_core.h>
 
 #include <asm/dma.h>
 #include <asm/arch/dma.h>

diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
index 0ab50f44f318bef575e414ef24d44430996492ce..344eb27cca48cf7ecb8138431348bf6d46d03c15 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2410/s3c2440.c
@@ -17,6 +17,7 @@
 #include <linux/timer.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/serial_core.h>
 #include <linux/sysdev.h>
 #include <linux/clk.h>
 
@@ -28,17 +29,9 @@
 #include <asm/io.h>
 #include <asm/irq.h>
 
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
-
 #include "s3c2440.h"
-#include "clock.h"
 #include "devs.h"
 #include "cpu.h"
-#include "pm.h"
 
 static struct sys_device s3c2440_sysdev = {
        .cls            = &s3c2440_sysclass,

diff --git a/arch/arm/mach-s3c2410/s3c2440.h b/arch/arm/mach-s3c2410/s3c2440.h
index 29cb6df65a481bcafa00ce1cd189a17a199d4908..dcd316076c595e3c1c014d7d64a59f95dd20669c 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2440.h
+++ b/arch/arm/mach-s3c2410/s3c2440.h
@@ -8,28 +8,10 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     24-Aug-2004 BJD  Start of S3C2440 CPU support
- *     04-Nov-2004 BJD  Added s3c2440_init_uarts()
- *     04-Jan-2005 BJD  Moved uart init to cpu code
- *     10-Jan-2005 BJD  Moved 2440 specific init here
- *     14-Jan-2005 BJD  Split the clock initialisation code
 */
 
 #ifdef CONFIG_CPU_S3C2440
-
 extern  int s3c2440_init(void);
-
-extern void s3c2440_map_io(struct map_desc *mach_desc, int size);
-
-extern void s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-
-extern void s3c2440_init_clocks(int xtal);
-
 #else
-#define s3c2440_init_clocks NULL
-#define s3c2440_init_uarts NULL
-#define s3c2440_map_io NULL
 #define s3c2440_init NULL
 #endif

diff --git a/arch/arm/mach-s3c2410/s3c2442-clock.c b/arch/arm/mach-s3c2410/s3c2442-clock.c
index d9f54b5cab7ff759e028cbadb8dd1c1edc5aa929..4e292ca7c9be7f7731fffe76ee2a1c358384546c 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2442-clock.c
+++ b/arch/arm/mach-s3c2410/s3c2442-clock.c
@@ -117,18 +117,18 @@ static int s3c2442_clk_add(struct sys_device *sysdev)
 {
        unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
        unsigned long clkdivn;
-       struct clk *clk_h;
-       struct clk *clk_p;
-       struct clk *clk_upll;
+       struct clk *clock_h;
+       struct clk *clock_p;
+       struct clk *clock_upll;
 
        printk("S3C2442: Clock Support, DVS %s\n",
               (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
 
-       clk_p = clk_get(NULL, "pclk");
-       clk_h = clk_get(NULL, "hclk");
-       clk_upll = clk_get(NULL, "upll");
+       clock_p = clk_get(NULL, "pclk");
+       clock_h = clk_get(NULL, "hclk");
+       clock_upll = clk_get(NULL, "upll");
 
-       if (IS_ERR(clk_p) || IS_ERR(clk_h) || IS_ERR(clk_upll)) {
+       if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
                printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
                return -EINVAL;
        }
@@ -136,8 +136,8 @@ static int s3c2442_clk_add(struct sys_device *sysdev)
        /* check rate of UPLL, and if it is near 96MHz, then change
         * to using half the UPLL rate for the system */
 
-       if (clk_get_rate(clk_upll) > (94 * MHZ)) {
-               clk_usb_bus.rate = clk_get_rate(clk_upll) / 2;
+       if (clk_get_rate(clock_upll) > (94 * MHZ)) {
+               clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
 
                mutex_lock(&clocks_mutex);
 
@@ -148,8 +148,8 @@ static int s3c2442_clk_add(struct sys_device *sysdev)
                mutex_unlock(&clocks_mutex);
        }
 
-       s3c2442_clk_cam.parent = clk_h;
-       s3c2442_clk_cam_upll.parent = clk_upll;
+       s3c2442_clk_cam.parent = clock_h;
+       s3c2442_clk_cam_upll.parent = clock_upll;
 
        s3c24xx_register_clock(&s3c2442_clk_cam);
        s3c24xx_register_clock(&s3c2442_clk_cam_upll);

diff --git a/arch/arm/mach-s3c2410/s3c2442.c b/arch/arm/mach-s3c2410/s3c2442.c
index 581667efd13c8f8c84af03b80b00796a8ac6482d..428732ee68c41520c4cf4acb72ff4b5f6d11c166 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c2442.c
+++ b/arch/arm/mach-s3c2410/s3c2442.c
@@ -16,29 +16,11 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
-#include <linux/platform_device.h>
+#include <linux/serial_core.h>
 #include <linux/sysdev.h>
-#include <linux/clk.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/arch/regs-clock.h>
-#include <asm/arch/regs-serial.h>
-#include <asm/arch/regs-gpio.h>
-#include <asm/arch/regs-gpioj.h>
-#include <asm/arch/regs-dsc.h>
 
 #include "s3c2442.h"
-#include "clock.h"
-#include "devs.h"
 #include "cpu.h"
-#include "pm.h"
 
 static struct sys_device s3c2442_sysdev = {
        .cls            = &s3c2442_sysclass,

diff --git a/arch/arm/mach-s3c2410/s3c244x.c b/arch/arm/mach-s3c2410/s3c244x.c
index 9a2258270de9cb1e7e9d12b9b45b90f9092d3582..23c7494ad10d57ce685de8e74da04c74da6a9261 100644 (file)
--- a/arch/arm/mach-s3c2410/s3c244x.c
+++ b/arch/arm/mach-s3c2410/s3c244x.c
@@ -16,6 +16,7 @@
 #include <linux/list.h>
 #include <linux/timer.h>
 #include <linux/init.h>
+#include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 #include <linux/clk.h>
@@ -47,8 +48,6 @@ static struct map_desc s3c244x_iodesc[] __initdata = {
        IODESC_ENT(TIMER),
        IODESC_ENT(WATCHDOG),
        IODESC_ENT(LCD),
-       IODESC_ENT(ADC),
-       IODESC_ENT(USBHOST),
 };
 
 /* uart initialisation */

diff --git a/arch/arm/mach-s3c2410/usb-simtec.h b/arch/arm/mach-s3c2410/usb-simtec.h
index d8aa6127dedb6826e4068ce637895b26d8074fe2..03842ede9e711d903cc17f4c44de5720f1dfc6ca 100644 (file)
--- a/arch/arm/mach-s3c2410/usb-simtec.h
+++ b/arch/arm/mach-s3c2410/usb-simtec.h
@@ -10,9 +10,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     20-Aug-2004 BJD  Created
 */
 
 extern int usb_simtec_init(void);

diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 3bb3951920bc9809b31ee19e184cc6e3475deea1..251685fe73a8841ec51190bf66f23fcf777009c9 100644 (file)
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -292,6 +292,8 @@ __ioremap_pfn(unsigned long pfn, unsigned long offset, size_t size,
        if (pfn >= 0x100000 && (__pfn_to_phys(pfn) & ~SUPERSECTION_MASK))
                return NULL;
 
+       size = PAGE_ALIGN(size);
+
        area = get_vm_area(size, VM_IOREMAP);
        if (!area)
                return NULL;

diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index f028aef9a861f284f280abf52f00fa106bdcad26..655c8376f0b57b73ee48dca75ce0197e619605ac 100644 (file)
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -154,6 +154,26 @@ static int __init noalign_setup(char *__unused)
 }
 __setup("noalign", noalign_setup);
 
+#ifndef CONFIG_SMP
+void adjust_cr(unsigned long mask, unsigned long set)
+{
+       unsigned long flags;
+
+       mask &= ~CR_A;
+
+       set &= mask;
+
+       local_irq_save(flags);
+
+       cr_no_alignment = (cr_no_alignment & ~mask) | set;
+       cr_alignment = (cr_alignment & ~mask) | set;
+
+       set_cr((get_cr() & ~mask) | set);
+
+       local_irq_restore(flags);
+}
+#endif
+
 struct mem_types {
        unsigned int    prot_pte;
        unsigned int    prot_l1;

diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 43494ae8f01af9acd083e2e6a1e66a2e12544da5..94a58455f346cca45fd759af3cb899b03594efd0 100644 (file)
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -2,7 +2,7 @@
  * linux/arch/arm/mm/proc-xsc3.S
  *
  * Original Author: Matthew Gilbert
- * Current Maintainer: Deepak Saxena <dsaxena@plexity.net>
+ * Current Maintainer: Lennert Buytenhek <buytenh@wantstofly.org>
  *
  * Copyright 2004 (C) Intel Corp.
  * Copyright 2005 (c) MontaVista Software, Inc.

diff --git a/arch/i386/defconfig b/arch/i386/defconfig
index 3265208e5899855b7981be59cf153e18000b0bb2..e075ff05c46dea818606f791a4178e0aa7b414c6 100644 (file)
--- a/arch/i386/defconfig
+++ b/arch/i386/defconfig
@@ -1493,8 +1493,6 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_FRAME_POINTER is not set
-CONFIG_UNWIND_INFO=y
-CONFIG_STACK_UNWIND=y
 # CONFIG_FORCED_INLINING is not set
 # CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set

diff --git a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
index 18f4715c655d18a2a453558ac546c9154f93902e..b735458c6e3aece33291afa2065efe3f551a1059 100644 (file)
--- a/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
+++ b/arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c
@@ -126,27 +126,6 @@ static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
        }
 }
 
-static void wrport(u16 port, u8 bit_width, u32 value)
-{
-       if (bit_width <= 8)
-               outb(value, port);
-       else if (bit_width <= 16)
-               outw(value, port);
-       else if (bit_width <= 32)
-               outl(value, port);
-}
-
-static void rdport(u16 port, u8 bit_width, u32 * ret)
-{
-       *ret = 0;
-       if (bit_width <= 8)
-               *ret = inb(port);
-       else if (bit_width <= 16)
-               *ret = inw(port);
-       else if (bit_width <= 32)
-               *ret = inl(port);
-}
-
 struct msr_addr {
        u32 reg;
 };
@@ -177,7 +156,9 @@ static void do_drv_read(struct drv_cmd *cmd)
                rdmsr(cmd->addr.msr.reg, cmd->val, h);
                break;
        case SYSTEM_IO_CAPABLE:
-               rdport(cmd->addr.io.port, cmd->addr.io.bit_width, &cmd->val);
+               acpi_os_read_port((acpi_io_address)cmd->addr.io.port,
+                               &cmd->val,
+                               (u32)cmd->addr.io.bit_width);
                break;
        default:
                break;
@@ -193,7 +174,9 @@ static void do_drv_write(struct drv_cmd *cmd)
                wrmsr(cmd->addr.msr.reg, cmd->val, h);
                break;
        case SYSTEM_IO_CAPABLE:
-               wrport(cmd->addr.io.port, cmd->addr.io.bit_width, cmd->val);
+               acpi_os_write_port((acpi_io_address)cmd->addr.io.port,
+                               cmd->val,
+                               (u32)cmd->addr.io.bit_width);
                break;
        default:
                break;
@@ -699,14 +682,14 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
        if (result)
                goto err_freqfree;
 
-       switch (data->cpu_feature) {
+       switch (perf->control_register.space_id) {
        case ACPI_ADR_SPACE_SYSTEM_IO:
                /* Current speed is unknown and not detectable by IO port */
                policy->cur = acpi_cpufreq_guess_freq(data, policy->cpu);
                break;
        case ACPI_ADR_SPACE_FIXED_HARDWARE:
                acpi_cpufreq_driver.get = get_cur_freq_on_cpu;
-               get_cur_freq_on_cpu(cpu);
+               policy->cur = get_cur_freq_on_cpu(cpu);
                break;
        default:
                break;

diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index c548daad347639c8451a9be8636e121d5a9c86af..6d9c97a690fd076e520a8134a3f87976ff064663 100644 (file)
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -787,8 +787,10 @@ static int __init longhaul_init(void)
        switch (c->x86_model) {
        case 6 ... 9:
                return cpufreq_register_driver(&longhaul_driver);
+       case 10:
+               printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
        default:
-               printk (KERN_INFO PFX "Unknown VIA CPU. Contact davej@codemonkey.org.uk\n");
+               ;;
        }
 
        return -ENODEV;

diff --git a/arch/i386/kernel/entry.S b/arch/i386/kernel/entry.S
index de34b7fed3c1718d88886fa3e24a94fa49ac662f..06461b8b715d532ef93c0d57e6f9efe3375815c1 100644 (file)
--- a/arch/i386/kernel/entry.S
+++ b/arch/i386/kernel/entry.S
@@ -979,38 +979,6 @@ ENTRY(spurious_interrupt_bug)
        jmp error_code
        CFI_ENDPROC
 
-#ifdef CONFIG_STACK_UNWIND
-ENTRY(arch_unwind_init_running)
-       CFI_STARTPROC
-       movl    4(%esp), %edx
-       movl    (%esp), %ecx
-       leal    4(%esp), %eax
-       movl    %ebx, PT_EBX(%edx)
-       xorl    %ebx, %ebx
-       movl    %ebx, PT_ECX(%edx)
-       movl    %ebx, PT_EDX(%edx)
-       movl    %esi, PT_ESI(%edx)
-       movl    %edi, PT_EDI(%edx)
-       movl    %ebp, PT_EBP(%edx)
-       movl    %ebx, PT_EAX(%edx)
-       movl    $__USER_DS, PT_DS(%edx)
-       movl    $__USER_DS, PT_ES(%edx)
-       movl    $0, PT_GS(%edx)
-       movl    %ebx, PT_ORIG_EAX(%edx)
-       movl    %ecx, PT_EIP(%edx)
-       movl    12(%esp), %ecx
-       movl    $__KERNEL_CS, PT_CS(%edx)
-       movl    %ebx, PT_EFLAGS(%edx)
-       movl    %eax, PT_OLDESP(%edx)
-       movl    8(%esp), %eax
-       movl    %ecx, 8(%esp)
-       movl    PT_EBX(%edx), %ebx
-       movl    $__KERNEL_DS, PT_OLDSS(%edx)
-       jmpl    *%eax
-       CFI_ENDPROC
-ENDPROC(arch_unwind_init_running)
-#endif
-
 ENTRY(kernel_thread_helper)
        pushl $0                # fake return address for unwinder
        CFI_STARTPROC

diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c
index 2b30dbf8d1170167283d57a7cbe3b0099231c788..0efad8aeb41af86849ac3b8e6b667d6603f4f594 100644 (file)
--- a/arch/i386/kernel/traps.c
+++ b/arch/i386/kernel/traps.c
@@ -94,11 +94,6 @@ asmlinkage void spurious_interrupt_bug(void);
 asmlinkage void machine_check(void);
 
 int kstack_depth_to_print = 24;
-#ifdef CONFIG_STACK_UNWIND
-static int call_trace = 1;
-#else
-#define call_trace (-1)
-#endif
 ATOMIC_NOTIFIER_HEAD(i386die_chain);
 
 int register_die_notifier(struct notifier_block *nb)
@@ -152,33 +147,6 @@ static inline unsigned long print_context_stack(struct thread_info *tinfo,
        return ebp;
 }
 
-struct ops_and_data {
-       struct stacktrace_ops *ops;
-       void *data;
-};
-
-static asmlinkage int
-dump_trace_unwind(struct unwind_frame_info *info, void *data)
-{
-       struct ops_and_data *oad = (struct ops_and_data *)data;
-       int n = 0;
-       unsigned long sp = UNW_SP(info);
-
-       if (arch_unw_user_mode(info))
-               return -1;
-       while (unwind(info) == 0 && UNW_PC(info)) {
-               n++;
-               oad->ops->address(oad->data, UNW_PC(info));
-               if (arch_unw_user_mode(info))
-                       break;
-               if ((sp & ~(PAGE_SIZE - 1)) == (UNW_SP(info) & ~(PAGE_SIZE - 1))
-                   && sp > UNW_SP(info))
-                       break;
-               sp = UNW_SP(info);
-       }
-       return n;
-}
-
 #define MSG(msg) ops->warning(data, msg)
 
 void dump_trace(struct task_struct *task, struct pt_regs *regs,
@@ -190,41 +158,6 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs,
        if (!task)
                task = current;
 
-       if (call_trace >= 0) {
-               int unw_ret = 0;
-               struct unwind_frame_info info;
-               struct ops_and_data oad = { .ops = ops, .data = data };
-
-               if (regs) {
-                       if (unwind_init_frame_info(&info, task, regs) == 0)
-                               unw_ret = dump_trace_unwind(&info, &oad);
-               } else if (task == current)
-                       unw_ret = unwind_init_running(&info, dump_trace_unwind,
-                                                     &oad);
-               else {
-                       if (unwind_init_blocked(&info, task) == 0)
-                               unw_ret = dump_trace_unwind(&info, &oad);
-               }
-               if (unw_ret > 0) {
-                       if (call_trace == 1 && !arch_unw_user_mode(&info)) {
-                               ops->warning_symbol(data,
-                                            "DWARF2 unwinder stuck at %s",
-                                            UNW_PC(&info));
-                               if (UNW_SP(&info) >= PAGE_OFFSET) {
-                                       MSG("Leftover inexact backtrace:");
-                                       stack = (void *)UNW_SP(&info);
-                                       if (!stack)
-                                               return;
-                                       ebp = UNW_FP(&info);
-                               } else
-                                       MSG("Full inexact backtrace again:");
-                       } else if (call_trace >= 1)
-                               return;
-                       else
-                               MSG("Full inexact backtrace again:");
-               } else
-                       MSG("Inexact backtrace:");
-       }
        if (!stack) {
                unsigned long dummy;
                stack = &dummy;
@@ -1258,19 +1191,3 @@ static int __init kstack_setup(char *s)
        return 1;
 }
 __setup("kstack=", kstack_setup);
-
-#ifdef CONFIG_STACK_UNWIND
-static int __init call_trace_setup(char *s)
-{
-       if (strcmp(s, "old") == 0)
-               call_trace = -1;
-       else if (strcmp(s, "both") == 0)
-               call_trace = 0;
-       else if (strcmp(s, "newfallback") == 0)
-               call_trace = 1;
-       else if (strcmp(s, "new") == 2)
-               call_trace = 2;
-       return 1;
-}
-__setup("call_trace=", call_trace_setup);
-#endif

diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c
index cde1170b01a1490e256ab2900cfef82f97787e0f..8053b17ab64753541d9684369c6999f166ccecd7 100644 (file)
--- a/arch/i386/pci/fixup.c
+++ b/arch/i386/pci/fixup.c
@@ -115,7 +115,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci
 #define VIA_8363_KL133_REVISION_ID 0x81
 #define VIA_8363_KM133_REVISION_ID 0x84
 
-static void __devinit pci_fixup_via_northbridge_bug(struct pci_dev *d)
+static void pci_fixup_via_northbridge_bug(struct pci_dev *d)
 {
        u8 v;
        u8 revision;
@@ -151,6 +151,10 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug);
 
 /*
  * For some reasons Intel decided that certain parts of their
@@ -181,7 +185,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_fixup_transparent_
  * issue another HALT within 80 ns of the initial HALT, the failure condition
  * is avoided.
  */
-static void __init pci_fixup_nforce2(struct pci_dev *dev)
+static void pci_fixup_nforce2(struct pci_dev *dev)
 {
        u32 val;
 
@@ -204,6 +208,7 @@ static void __init pci_fixup_nforce2(struct pci_dev *dev)
        }
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2);
 
 /* Max PCI Express root ports */
 #define MAX_PCIEROOT   6
@@ -419,7 +424,7 @@ DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032,
  * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device
  * configuration space.
  */
-static void __devinit pci_early_fixup_cyrix_5530(struct pci_dev *dev)
+static void pci_early_fixup_cyrix_5530(struct pci_dev *dev)
 {
        u8 r;
        /* clear 'F4 Video Configuration Trap' bit */
@@ -429,3 +434,5 @@ static void __devinit pci_early_fixup_cyrix_5530(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
                        pci_early_fixup_cyrix_5530);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY,
+                       pci_early_fixup_cyrix_5530);

diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 343dbcfdf08a6484425666e3038cf2f6fd5a6e17..98392fb5f5815243b0ede4a76ef676f782de1bfb 100644 (file)
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -152,6 +152,9 @@ $(obj)/zImage.initrd.miboot: vmlinux $(wrapperbits)
 $(obj)/zImage.ps3: vmlinux
        $(STRIP) -s -R .comment $< -o $@
 
+$(obj)/zImage.initrd.ps3: vmlinux
+       @echo "  WARNING zImage.initrd.ps3 not supported (yet)"
+
 $(obj)/uImage: vmlinux $(wrapperbits)
        $(call cmd,wrap,uboot)
 

diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig
index a98c982c73adac65956e939be1c58af65e08a6a5..d1d25152f74f8a2db4b63771099a7065969ed6d5 100644 (file)
--- a/arch/powerpc/configs/cell_defconfig
+++ b/arch/powerpc/configs/cell_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.19-rc6
-# Wed Nov 22 15:33:04 2006
+# Linux kernel version: 2.6.20-rc1
+# Tue Dec 19 14:59:53 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -10,6 +10,8 @@ CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_ARCH_HAS_ILOG2_U32=y
+CONFIG_ARCH_HAS_ILOG2_U64=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -23,6 +25,7 @@ CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_GENERIC_BUG=y
 # CONFIG_DEFAULT_UIMAGE is not set
 
 #
@@ -66,6 +69,7 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -128,14 +132,16 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_APUS is not set
 # CONFIG_PPC_PSERIES is not set
 # CONFIG_PPC_ISERIES is not set
+# CONFIG_PPC_MPC52xx is not set
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_MAPLE is not set
 # CONFIG_PPC_PASEMI is not set
 CONFIG_PPC_CELL=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
-CONFIG_UDBG_RTAS_CONSOLE=y
 CONFIG_PPC_PS3=y
+CONFIG_PPC_NATIVE=y
+CONFIG_UDBG_RTAS_CONSOLE=y
 # CONFIG_U3_DART is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
@@ -177,12 +183,14 @@ CONFIG_CBE_CPUFREQ=m
 CONFIG_PS3_HTAB_SIZE=20
 # CONFIG_PS3_DYNAMIC_DMA is not set
 CONFIG_PS3_USE_LPAR_ADDR=y
+CONFIG_PS3_VUART=y
 
 #
 # Kernel options
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 CONFIG_PREEMPT_NONE=y
@@ -237,6 +245,7 @@ CONFIG_GENERIC_ISA_DMA=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
 CONFIG_PCIEPORTBUS=y
+# CONFIG_PCI_MULTITHREAD_PROBE is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -270,7 +279,10 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 CONFIG_NET_IPIP=y
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
@@ -289,6 +301,7 @@ CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 
 #
 # IP: Virtual Server Configuration
@@ -317,31 +330,67 @@ CONFIG_NETFILTER=y
 #
 # Core Netfilter Configuration
 #
-# CONFIG_NETFILTER_NETLINK is not set
-# CONFIG_NETFILTER_XTABLES is not set
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+# CONFIG_NF_CONNTRACK_ENABLED is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 
 #
 # IP: Netfilter Configuration
 #
-CONFIG_IP_NF_CONNTRACK=y
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
-CONFIG_IP_NF_CT_PROTO_SCTP=y
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-# CONFIG_IP_NF_NETBIOS_NS is not set
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-# CONFIG_IP_NF_PPTP is not set
-# CONFIG_IP_NF_H323 is not set
-# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_OWNER=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
 
 #
 # IPv6: Netfilter Configuration (EXPERIMENTAL)
 #
 # CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
 
 #
 # DCCP Configuration (EXPERIMENTAL)
@@ -373,6 +422,7 @@ CONFIG_IP_NF_QUEUE=m
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
 
 #
 # Network testing
@@ -428,6 +478,7 @@ CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
@@ -457,6 +508,7 @@ CONFIG_IDEDISK_MULTI_MODE=y
 # CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
 # CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
 # CONFIG_IDE_TASK_IOCTL is not set
 
 #
@@ -468,7 +520,6 @@ CONFIG_IDEPCI_SHARE_IRQ=y
 # CONFIG_BLK_DEV_OFFBOARD is not set
 CONFIG_BLK_DEV_GENERIC=y
 # CONFIG_BLK_DEV_OPTI621 is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
 CONFIG_BLK_DEV_IDEDMA_PCI=y
 # CONFIG_BLK_DEV_IDEDMA_FORCED is not set
 CONFIG_IDEDMA_PCI_AUTO=y
@@ -492,6 +543,7 @@ CONFIG_BLK_DEV_AEC62XX=y
 # CONFIG_BLK_DEV_PDC202XX_NEW is not set
 # CONFIG_BLK_DEV_SVWKS is not set
 CONFIG_BLK_DEV_SIIMAGE=y
+# CONFIG_BLK_DEV_SL82C105 is not set
 # CONFIG_BLK_DEV_SLC90E66 is not set
 # CONFIG_BLK_DEV_TRM290 is not set
 # CONFIG_BLK_DEV_VIA82CXXX is not set
@@ -505,8 +557,74 @@ CONFIG_IDEDMA_AUTO=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=m
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=m
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
+# CONFIG_SCSI_ACARD is not set
+# CONFIG_SCSI_AACRAID is not set
+# CONFIG_SCSI_AIC7XXX is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_AIC79XX is not set
+# CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_ARCMSR is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_SCSI_DMX3191D is not set
+# CONFIG_SCSI_EATA is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GDTH is not set
+# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
+# CONFIG_SCSI_INIA100 is not set
+# CONFIG_SCSI_STEX is not set
+# CONFIG_SCSI_SYM53C8XX_2 is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
+# CONFIG_SCSI_QLA_FC is not set
+# CONFIG_SCSI_QLA_ISCSI is not set
+# CONFIG_SCSI_LPFC is not set
+# CONFIG_SCSI_DC395x is not set
+# CONFIG_SCSI_DC390T is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_SRP is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -538,6 +656,9 @@ CONFIG_DM_MULTIPATH=m
 # Fusion MPT device support
 #
 # CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
 
 #
 # IEEE 1394 (FireWire) support
@@ -552,6 +673,7 @@ CONFIG_DM_MULTIPATH=m
 #
 # Macintosh device drivers
 #
+# CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 
 #
@@ -559,7 +681,7 @@ CONFIG_DM_MULTIPATH=m
 #
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
-CONFIG_BONDING=y
+CONFIG_BONDING=m
 # CONFIG_EQUALIZER is not set
 CONFIG_TUN=y
 
@@ -604,11 +726,11 @@ CONFIG_E1000_NAPI=y
 # CONFIG_R8169 is not set
 # CONFIG_SIS190 is not set
 CONFIG_SKGE=m
-# CONFIG_SKY2 is not set
+CONFIG_SKY2=m
 # CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
+CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
-CONFIG_SPIDER_NET=m
+CONFIG_SPIDER_NET=y
 # CONFIG_QLA3XXX is not set
 
 #
@@ -618,6 +740,7 @@ CONFIG_SPIDER_NET=m
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
 # CONFIG_MYRI10GE is not set
+# CONFIG_NETXEN_NIC is not set
 
 #
 # Token Ring devices
@@ -637,6 +760,7 @@ CONFIG_SPIDER_NET=m
 # CONFIG_HIPPI is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
 # CONFIG_SHAPER is not set
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
@@ -703,6 +827,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGIEPCA is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
+# CONFIG_MOXA_SMARTIO_NEW is not set
 # CONFIG_ISI is not set
 # CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
@@ -729,6 +854,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_JSM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_HVC_DRIVER=y
@@ -756,16 +882,17 @@ CONFIG_WATCHDOG_RTAS=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_AGP is not set
 # CONFIG_DRM is not set
 # CONFIG_RAW_DRIVER is not set
@@ -855,12 +982,14 @@ CONFIG_I2C_ALGOBIT=y
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_FB_IBM_GXT4500 is not set
 
 #
 # Console display driver support
@@ -874,18 +1003,145 @@ CONFIG_DUMMY_CONSOLE=y
 #
 # CONFIG_SOUND is not set
 
+#
+# HID Devices
+#
+CONFIG_HID=m
+
 #
 # USB support
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_BANDWIDTH is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_MULTITHREAD_PROBE is not set
+# CONFIG_USB_OTG is not set
+
+#
+# USB Host Controller Drivers
+#
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_ISP116X_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
 
 #
 # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
 #
 
+#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Input Devices
+#
+# CONFIG_USB_HID is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
+# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_TOUCHSCREEN is not set
+# CONFIG_USB_YEALINK is not set
+# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_ATI_REMOTE2 is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET_MII is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_TEST is not set
+
+#
+# USB DSL modem support
+#
+
 #
 # USB Gadget Support
 #
@@ -912,7 +1168,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # InfiniBand support
 #
-CONFIG_INFINIBAND=y
+CONFIG_INFINIBAND=m
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
 CONFIG_INFINIBAND_ADDR_TRANS=y
@@ -922,6 +1178,8 @@ CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
 CONFIG_INFINIBAND_IPOIB_DEBUG=y
 CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
+# CONFIG_INFINIBAND_SRP is not set
+# CONFIG_INFINIBAND_ISER is not set
 
 #
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
@@ -945,6 +1203,10 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 # DMA Devices
 #
 
+#
+# Virtualization
+#
+
 #
 # File systems
 #
@@ -1028,23 +1290,18 @@ CONFIG_RAMFS=y
 #
 # Network File Systems
 #
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
 # CONFIG_NFS_DIRECTIO is not set
-CONFIG_NFSD=m
-CONFIG_NFSD_V2_ACL=y
-CONFIG_NFSD_V3=y
-CONFIG_NFSD_V3_ACL=y
-# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
-CONFIG_LOCKD=m
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
-CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
+CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1119,9 +1376,15 @@ CONFIG_NLS_ISO8859_15=m
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -1130,7 +1393,10 @@ CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y
 
 #
 # Instrumentation Support
@@ -1146,6 +1412,8 @@ CONFIG_OPROFILE=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_DETECT_SOFTLOCKUP=y
@@ -1159,12 +1427,11 @@ CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_FS=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_FORCED_INLINING is not set
-# CONFIG_HEADERS_CHECK is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1191,6 +1458,7 @@ CONFIG_CRYPTO_BLKCIPHER=m
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
 # CONFIG_CRYPTO_NULL is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=m
@@ -1199,8 +1467,10 @@ CONFIG_CRYPTO_SHA1=m
 # CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_WP512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_DES=m
 # CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_TWOFISH is not set

diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c
index 3002ea3a61a24df59fd437ecbd80866af1e3c6d6..b7345176b399f033d4c9270804da1c5f219a6c01 100644 (file)
--- a/arch/powerpc/kernel/of_platform.c
+++ b/arch/powerpc/kernel/of_platform.c
@@ -50,6 +50,7 @@ static struct of_device_id of_default_bus_ids[] = {
        { .type = "plb5", },
        { .type = "plb4", },
        { .type = "opb", },
+       { .type = "ebc", },
        {},
 };
 

diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index a6b7692c72690bc592e1429d08a921e23f9ed946..73c59ec4912059d5693f8026a95ff946c4701e9d 100644 (file)
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -360,6 +360,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
        DBG("    class: 0x%x\n", dev->class);
 
        dev->current_state = 4;         /* unknown power state */
+       dev->error_state = pci_channel_io_normal;
 
        if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
                /* a PCI-PCI bridge */

diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index 0dfbe1cd28eb2644cd59927eae4938fa8fdf088a..12c51e4ad2b4b97b4468e8fca178fa435d86a025 100644 (file)
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -920,9 +920,20 @@ static int of_irq_map_oldworld(struct device_node *device, int index,
 
        /*
         * Old machines just have a list of interrupt numbers
-        * and no interrupt-controller nodes.
+        * and no interrupt-controller nodes. We also have dodgy
+        * cases where the APPL,interrupts property is completely
+        * missing behind pci-pci bridges and we have to get it
+        * from the parent (the bridge itself, as apple just wired
+        * everything together on these)
         */
-       ints = get_property(device, "AAPL,interrupts", &intlen);
+       while (device) {
+               ints = get_property(device, "AAPL,interrupts", &intlen);
+               if (ints != NULL)
+                       break;
+               device = device->parent;
+               if (device && strcmp(device->type, "pci") != 0)
+                       break;
+       }
        if (ints == NULL)
                return -EINVAL;
        intlen /= sizeof(u32);

diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c
index e4ebe1a6228e5e9a9ad32da2dd7f601f5f6afc61..6b405a3f43f943b67c5b3cd2cabaeed43847aa00 100644 (file)
--- a/arch/powerpc/kernel/signal_32.c
+++ b/arch/powerpc/kernel/signal_32.c
@@ -835,11 +835,21 @@ long sys_swapcontext(struct ucontext __user *old_ctx,
                return -EINVAL;
 
        if (old_ctx != NULL) {
+               struct mcontext __user *mctx;
+
+               /*
+                * old_ctx might not be 16-byte aligned, in which
+                * case old_ctx->uc_mcontext won't be either.
+                * Because we have the old_ctx->uc_pad2 field
+                * before old_ctx->uc_mcontext, we need to round down
+                * from &old_ctx->uc_mcontext to a 16-byte boundary.
+                */
+               mctx = (struct mcontext __user *)
+                       ((unsigned long) &old_ctx->uc_mcontext & ~0xfUL);
                if (!access_ok(VERIFY_WRITE, old_ctx, sizeof(*old_ctx))
-                   || save_user_regs(regs, &old_ctx->uc_mcontext, 0)
+                   || save_user_regs(regs, mctx, 0)
                    || put_sigset_t(&old_ctx->uc_sigmask, &current->blocked)
-                   || __put_user(to_user_ptr(&old_ctx->uc_mcontext),
-                           &old_ctx->uc_regs))
+                   || __put_user(to_user_ptr(mctx), &old_ctx->uc_regs))
                        return -EFAULT;
        }
        if (new_ctx == NULL)

diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile
index 44d95eaf22e642ae0dc14fcfc05f2eff83bc52b8..507d1b98f270521776a3596d6c4b1b6226abe01c 100644 (file)
--- a/arch/powerpc/platforms/Makefile
+++ b/arch/powerpc/platforms/Makefile
@@ -5,9 +5,9 @@ ifeq ($(CONFIG_PPC64),y)
 obj-$(CONFIG_PPC_PMAC)         += powermac/
 endif
 endif
+obj-$(CONFIG_PPC_MPC52xx)      += 52xx/
 obj-$(CONFIG_PPC_CHRP)         += chrp/
 obj-$(CONFIG_4xx)              += 4xx/
-obj-$(CONFIG_PPC_MPC52xx)      += 52xx/
 obj-$(CONFIG_PPC_83xx)         += 83xx/
 obj-$(CONFIG_PPC_85xx)         += 85xx/
 obj-$(CONFIG_PPC_86xx)         += 86xx/

diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index 580d4259591241d167cea642392924492880bc6f..7c73128305ec40754cb87febebec72bbde8a7279 100644 (file)
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -37,7 +37,7 @@
  */
 #define SPIDER_DISABLE_PREFETCH
 
-#define MAX_SPIDERS    2
+#define MAX_SPIDERS    3
 
 static struct spider_pci_bus {
        void __iomem    *regs;

diff --git a/arch/powerpc/platforms/cell/spu_priv1_mmio.c b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
index a5de0430c56d8974332a38a5d21c680d3297e7c5..910a926b61a23c7fce9390799d0becc89122819a 100644 (file)
--- a/arch/powerpc/platforms/cell/spu_priv1_mmio.c
+++ b/arch/powerpc/platforms/cell/spu_priv1_mmio.c
@@ -37,8 +37,9 @@
 #include "interrupt.h"
 #include "spu_priv1_mmio.h"
 
+static DEFINE_MUTEX(add_spumem_mutex);
+
 struct spu_pdata {
-       int nid;
        struct device_node *devnode;
        struct spu_priv1 __iomem *priv1;
 };
@@ -56,20 +57,9 @@ struct device_node *spu_devnode(struct spu *spu)
 
 EXPORT_SYMBOL_GPL(spu_devnode);
 
-static int __init find_spu_node_id(struct device_node *spe)
-{
-       const unsigned int *id;
-       struct device_node *cpu;
-       cpu = spe->parent->parent;
-       id = get_property(cpu, "node-id", NULL);
-       return id ? *id : 0;
-}
-
 static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
                const char *prop)
 {
-       static DEFINE_MUTEX(add_spumem_mutex);
-
        const struct address_prop {
                unsigned long address;
                unsigned int len;
@@ -87,7 +77,7 @@ static int __init cell_spuprop_present(struct spu *spu, struct device_node *spe,
        start_pfn = p->address >> PAGE_SHIFT;
        nr_pages = ((unsigned long)p->len + PAGE_SIZE - 1) >> PAGE_SHIFT;
 
-       pgdata = NODE_DATA(spu_get_pdata(spu)->nid);
+       pgdata = NODE_DATA(spu->node);
        zone = pgdata->node_zones;
 
        /* XXX rethink locking here */
@@ -140,6 +130,7 @@ static int __init spu_map_interrupts_old(struct spu *spu,
 {
        unsigned int isrc;
        const u32 *tmp;
+       int nid;
 
        /* Get the interrupt source unit from the device-tree */
        tmp = get_property(np, "isrc", NULL);
@@ -147,8 +138,15 @@ static int __init spu_map_interrupts_old(struct spu *spu,
                return -ENODEV;
        isrc = tmp[0];
 
+       tmp = get_property(np->parent->parent, "node-id", NULL);
+       if (!tmp) {
+               printk(KERN_WARNING "%s: can't find node-id\n", __FUNCTION__);
+               nid = spu->node;
+       } else
+               nid = tmp[0];
+
        /* Add the node number */
-       isrc |= spu->node << IIC_IRQ_NODE_SHIFT;
+       isrc |= nid << IIC_IRQ_NODE_SHIFT;
 
        /* Now map interrupts of all 3 classes */
        spu->irqs[0] = irq_create_mapping(NULL, IIC_IRQ_CLASS_0 | isrc);
@@ -237,70 +235,88 @@ err:
        return ret;
 }
 
-static int spu_map_resource(struct device_node *node, int nr,
-               void __iomem** virt, unsigned long *phys)
+static int spu_map_resource(struct spu *spu, int nr,
+                           void __iomem** virt, unsigned long *phys)
 {
+       struct device_node *np = spu_get_pdata(spu)->devnode;
+       unsigned long start_pfn, nr_pages;
+       struct pglist_data *pgdata;
+       struct zone *zone;
        struct resource resource = { };
+       unsigned long len;
        int ret;
 
-       ret = of_address_to_resource(node, nr, &resource);
+       ret = of_address_to_resource(np, nr, &resource);
        if (ret)
                goto out;
 
        if (phys)
                *phys = resource.start;
-       *virt = ioremap(resource.start, resource.end - resource.start);
+       len = resource.end - resource.start + 1;
+       *virt = ioremap(resource.start, len);
        if (!*virt)
                ret = -EINVAL;
 
+       start_pfn = resource.start >> PAGE_SHIFT;
+       nr_pages = (len + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+       pgdata = NODE_DATA(spu->node);
+       zone = pgdata->node_zones;
+
+       /* XXX rethink locking here */
+       mutex_lock(&add_spumem_mutex);
+       ret = __add_pages(zone, start_pfn, nr_pages);
+       mutex_unlock(&add_spumem_mutex);
+
 out:
        return ret;
 }
 
-static int __init spu_map_device(struct spu *spu, struct device_node *node)
+static int __init spu_map_device(struct spu *spu)
 {
+       struct device_node *np = spu_get_pdata(spu)->devnode;
        int ret = -ENODEV;
-       spu->name = get_property(node, "name", NULL);
+
+       spu->name = get_property(np, "name", NULL);
        if (!spu->name)
                goto out;
 
-       ret = spu_map_resource(node, 0, (void __iomem**)&spu->local_store,
-                                       &spu->local_store_phys);
+       ret = spu_map_resource(spu, 0, (void __iomem**)&spu->local_store,
+                              &spu->local_store_phys);
        if (ret) {
                pr_debug("spu_new: failed to map %s resource 0\n",
-                        node->full_name);
+                        np->full_name);
                goto out;
        }
-       ret = spu_map_resource(node, 1, (void __iomem**)&spu->problem,
-                                       &spu->problem_phys);
+       ret = spu_map_resource(spu, 1, (void __iomem**)&spu->problem,
+                              &spu->problem_phys);
        if (ret) {
                pr_debug("spu_new: failed to map %s resource 1\n",
-                        node->full_name);
+                        np->full_name);
                goto out_unmap;
        }
-       ret = spu_map_resource(node, 2, (void __iomem**)&spu->priv2,
-                                       NULL);
+       ret = spu_map_resource(spu, 2, (void __iomem**)&spu->priv2, NULL);
        if (ret) {
                pr_debug("spu_new: failed to map %s resource 2\n",
-                        node->full_name);
+                        np->full_name);
                goto out_unmap;
        }
        if (!firmware_has_feature(FW_FEATURE_LPAR))
-               ret = spu_map_resource(node, 3,
-                       (void __iomem**)&spu_get_pdata(spu)->priv1, NULL);
+               ret = spu_map_resource(spu, 3,
+                              (void __iomem**)&spu_get_pdata(spu)->priv1, NULL);
        if (ret) {
                pr_debug("spu_new: failed to map %s resource 3\n",
-                        node->full_name);
+                        np->full_name);