drm/i915/vlv: Disable HPD in valleyview_crt_detect_hotplug()
authorLyude <cpaul@redhat.com>
Tue, 21 Jun 2016 21:03:43 +0000 (17:03 -0400)
committerDaniel Vetter <daniel.vetter@ffwll.ch>
Thu, 14 Jul 2016 20:06:11 +0000 (22:06 +0200)
One of the things preventing us from using polling is the fact that
calling valleyview_crt_detect_hotplug() when there's a VGA cable
connected results in sending another hotplug. With polling enabled when
HPD is disabled, this results in a scenario like this:

- We enable power wells and reset the ADPA
- output_poll_exec does force probe on VGA, triggering a hpd
- HPD handler waits for poll to unlock dev->mode_config.mutex
- output_poll_exec shuts off the ADPA, unlocks dev->mode_config.mutex
- HPD handler runs, resets ADPA and brings us back to the start

This results in an endless irq storm getting sent from the ADPA
whenever a VGA connector gets detected in the middle of polling.

Somewhat based off of the "drm/i915: Disable CRT HPD around force
trigger" patch Ville Syrjälä sent a while back

Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drivers/gpu/drm/i915/i915_drv.h
drivers/gpu/drm/i915/intel_crt.c
drivers/gpu/drm/i915/intel_hotplug.c

index a13b0989044440c023497eec898ef4f7c10271d2..255293636e19a297a511e9c157fe11366ece2ef2 100644 (file)
@@ -2957,6 +2957,8 @@ void intel_hpd_init(struct drm_i915_private *dev_priv);
 void intel_hpd_init_work(struct drm_i915_private *dev_priv);
 void intel_hpd_cancel_work(struct drm_i915_private *dev_priv);
 bool intel_hpd_pin_to_port(enum hpd_pin pin, enum port *port);
+bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin);
+void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin);
 
 /* i915_irq.c */
 static inline void i915_queue_hangcheck(struct drm_i915_private *dev_priv)
index d172930ac1e72f9ebaf8cbd6371c392aba1bbe59..827b6ef4e9aedfa669c91942d71f84e800841c38 100644 (file)
@@ -329,10 +329,25 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
        struct drm_device *dev = connector->dev;
        struct intel_crt *crt = intel_attached_crt(connector);
        struct drm_i915_private *dev_priv = to_i915(dev);
+       bool reenable_hpd;
        u32 adpa;
        bool ret;
        u32 save_adpa;
 
+       /*
+        * Doing a force trigger causes a hpd interrupt to get sent, which can
+        * get us stuck in a loop if we're polling:
+        *  - We enable power wells and reset the ADPA
+        *  - output_poll_exec does force probe on VGA, triggering a hpd
+        *  - HPD handler waits for poll to unlock dev->mode_config.mutex
+        *  - output_poll_exec shuts off the ADPA, unlocks
+        *    dev->mode_config.mutex
+        *  - HPD handler runs, resets ADPA and brings us back to the start
+        *
+        * Just disable HPD interrupts here to prevent this
+        */
+       reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin);
+
        save_adpa = adpa = I915_READ(crt->adpa_reg);
        DRM_DEBUG_KMS("trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 
@@ -357,6 +372,9 @@ static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
 
        DRM_DEBUG_KMS("valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
 
+       if (reenable_hpd)
+               intel_hpd_enable(dev_priv, crt->base.hpd_pin);
+
        return ret;
 }
 
index 51434ec871f217b637de8bb197190cee7aee6af1..57f50a18fadd6f1475de91c5c4c0a7b681deae50 100644 (file)
@@ -510,3 +510,30 @@ void intel_hpd_cancel_work(struct drm_i915_private *dev_priv)
        cancel_work_sync(&dev_priv->hotplug.hotplug_work);
        cancel_delayed_work_sync(&dev_priv->hotplug.reenable_work);
 }
+
+bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
+{
+       bool ret = false;
+
+       if (pin == HPD_NONE)
+               return false;
+
+       spin_lock_irq(&dev_priv->irq_lock);
+       if (dev_priv->hotplug.stats[pin].state == HPD_ENABLED) {
+               dev_priv->hotplug.stats[pin].state = HPD_DISABLED;
+               ret = true;
+       }
+       spin_unlock_irq(&dev_priv->irq_lock);
+
+       return ret;
+}
+
+void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin)
+{
+       if (pin == HPD_NONE)
+               return;
+
+       spin_lock_irq(&dev_priv->irq_lock);
+       dev_priv->hotplug.stats[pin].state = HPD_ENABLED;
+       spin_unlock_irq(&dev_priv->irq_lock);
+}