-----------
Each pin has an unique number associated with it in regs-gpio.h,
- eg S3C2410_GPA0 or S3C2410_GPF1. These defines are used to tell
+ eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell
the GPIO functions which pin is to be used.
Eg:
- s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
- which would turn GPA0 into the lowest Address line A0, and set
- GPE8 to be connected to the SDIO/MMC controller's SDDAT1 line.
+ which would turn GPA(0) into the lowest Address line A0, and set
+ GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line.
Reading the current configuration
Unit: revolution/min (RPM)
RW
+fan[1-*]_max Fan maximum value
+ Unit: revolution/min (RPM)
+ Only rarely supported by the hardware.
+ RW
+
fan[1-*]_input Fan input value.
Unit: revolution/min (RPM)
RO
in[0-*]_min_alarm
in[0-*]_max_alarm
fan[1-*]_min_alarm
+fan[1-*]_max_alarm
temp[1-*]_min_alarm
temp[1-*]_max_alarm
temp[1-*]_crit_alarm
Anonymous finger details are sent sequentially as separate packets of ABS
events. Only the ABS_MT events are recognized as part of a finger
packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else. Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ SYN_REPORT
Event Semantics
The length of the major axis of the contact. The length should be given in
surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
ABS_MT_TOUCH_MINOR
The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
ABS_MT_WIDTH_MAJOR
The length, in surface units, of the major axis of the approaching
tool. This should be understood as the size of the tool itself. The
orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
ABS_MT_WIDTH_MINOR
The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
The above four values can be used to derive additional information about
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
ABS_MT_ORIENTATION
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned. Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
ABS_MT_POSITION_X
The BLOB_ID groups several packets together into one arbitrarily shaped
contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+ ABS_MT_TOUCH_MAJOR := max(X, Y)
+ ABS_MT_TOUCH_MINOR := min(X, Y)
+ ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
Finger Tracking
anonymous contacts currently on the surface. The order in which the packets
appear in the event stream is not important.
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
unique until the contact vanishes (when the finger leaves the surface). The
problem of assigning a set of anonymous fingers to a set of identified
fingers is a euclidian bipartite matching problem at each event update, and
relies on a sufficiently rapid update rate.
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
Notes
-----
time of writing (April 2009), the MT protocol is not yet merged, and the
prototype implements finger matching, basic mouse support and two-finger
scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.
register save and restore. The kernel will only save
legacy floating-point registers on task switch.
+ noxsave [BUGS=X86] Disables x86 extended register state save
+ and restore using xsave. The kernel will fallback to
+ enabling legacy floating-point and sse state.
+
nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or
wfi(ARM) instruction doesn't work correctly and not to
use it. This is also useful when using JTAG debugger.
ref-no-jd Reference board without HP/Mic jack detection
3stack D965 3stack
5stack D965 5stack + SPDIF
+ 5stack-no-fp D965 5stack without front panel
dell-3stack Dell Dimension E520
dell-bios Fixes with Dell BIOS setup
auto BIOS setup (default)
When this value is greater than 1, the driver will show the
stack trace additionally. This may help the debugging.
+ Since 2.6.30, this option also enables the hwptr check using
+ jiffies. This detects spontaneous invalid pointer callback
+ values, but can be lead to too much corrections for a (mostly
+ buggy) hardware that doesn't give smooth pointer updates.
+
card*/pcm*/sub*/info
The general information of this PCM sub-stream.
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
-M: thomas.dahlmann@amd.com
+M: dahlmann.thomas@arcor.de
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/usb/gadget/amd5536udc.*
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
+F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
P: Russell King
M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
P: Russell King
F: include/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
-P: Bryan Wu
-M: cooloney@kernel.org
+P: Mike Frysinger
+M: vapier@gentoo.org
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: arch/blackfin/
BLACKFIN EMAC DRIVER
-P: Bryan Wu
-M: cooloney@kernel.org
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P: Michael Hennerich
+M: michael.hennerich@analog.com
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/net/bfin_mac.*
BLACKFIN RTC DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/rtc/rtc-bfin.c
BLACKFIN SERIAL DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/serial/bfin_5xx.c
BLACKFIN WATCHDOG DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/watchdog/bfin_wdt.c
BLACKFIN I2C TWI DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org/
S: Supported
F: drivers/i2c/busses/i2c-bfin-twi.c
S: Maintained
F: drivers/net/wan/cosa*
+CPMAC ETHERNET DRIVER
+P: Florian Fainelli
+M: florian@openwrt.org
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/cpmac.c
+
CPU FREQUENCY DRIVERS
P: Dave Jones
M: davej@redhat.com
EDAC-E752X
P: Mark Gross
-P: Doug Thompson
M: mark.gross@intel.com
+P: Doug Thompson
M: dougthompson@xmission.com
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
M: leoli@freescale.com
P: Zhang Wei
M: zw@zh-kernel.org
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/dma/fsldma.*
F: drivers/video/riva/
F: drivers/video/nvidia/
+OMAP SUPPORT
+P: Tony Lindgren <tony@atomide.com>
+M: tony@atomide.com
+L: linux-omap@vger.kernel.org
+W: http://www.muru.com/linux/omap/
+W: http://linux.omap.com/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+S: Maintained
+F: arch/arm/*omap*
+
+OMAP CLOCK FRAMEWORK SUPPORT
+P: Paul Walmsley
+M: paul@pwsan.com
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/*omap*/*clock*
+
+OMAP POWER MANAGEMENT SUPPORT
+P: Kevin Hilman
+M: khilman@deeprootsystems.com
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: arch/arm/*omap*/*pm*
+
+OMAP AUDIO SUPPORT
+P: Jarkko Nikula
+M: jhnikula@gmail.com
+L: alsa-devel@alsa-project.org (subscribers-only)
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: sound/soc/omap/
+
+OMAP FRAMEBUFFER SUPPORT
+P: Imre Deak
+M: imre.deak@nokia.com
+L: linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/video/omap/
+
+OMAP MMC SUPPORT
+P: Jarkko Lavinen
+M: jarkko.lavinen@nokia.com
+L: linux-kernel@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/mmc/host/*omap*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+P: Deepak Saxena
+M: dsaxena@plexity.net
+S: Maintained
+F: drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+P: Felipe Balbi
+M: felipe.balbi@nokia.com
+P: David Brownell
+M: dbrownell@users.sourceforge.net
+L: linux-usb@vger.kernel.org
+L: linux-omap@vger.kernel.org
+S: Maintained
+
OMFS FILESYSTEM
P: Bob Copeland
M: me@bobcopeland.com
F: drivers/mmc/host/tifm_sd.c
F: include/linux/tifm.h
-TI OMAP MMC INTERFACE DRIVER
-P: Carlos Aguiar, Anderson Briglia and Syed Khasim
-M: linux-omap@vger.kernel.org
-W: http://linux.omap.com
-W: http://www.muru.com/linux/omap/
-S: Maintained
-F: drivers/mmc/host/omap.c
-
-TI OMAP RANDOM NUMBER GENERATOR SUPPORT
-P: Deepak Saxena
-M: dsaxena@plexity.net
-S: Maintained
-F: drivers/char/hw_random/omap-rng.c
-
TIPC NETWORK LAYER
P: Per Liden
M: per.liden@ericsson.com
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc8
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
config GENERIC_GPIO
bool
- default n
config GENERIC_TIME
bool
- default n
config GENERIC_CLOCKEVENTS
bool
- default n
config GENERIC_CLOCKEVENTS_BROADCAST
bool
config NO_IOPORT
bool
- default n
config EISA
bool
config ARCH_HAS_ILOG2_U32
bool
- default n
config ARCH_HAS_ILOG2_U64
bool
- default n
config GENERIC_HWEIGHT
bool
help
Support for Cirrus Logic 711x/721x based boards.
+config ARCH_GEMINI
+ bool "Cortina Systems Gemini"
+ select CPU_FA526
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for the Cortina Systems Gemini family SoCs
+
config ARCH_EBSA110
bool "EBSA-110"
select CPU_SA110
help
This enables support for the Cirrus EP93xx series of CPUs.
-config ARCH_GEMINI
- bool "Cortina Systems Gemini"
- select CPU_FA526
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Support for the Cortina Systems Gemini family SoCs
-
config ARCH_FOOTBRIDGE
bool "FootBridge"
select CPU_SA110
Support for systems based on the DC21285 companion chip
("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
+config ARCH_MXC
+ bool "Freescale MXC/iMX-based"
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select ARCH_MTD_XIP
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ help
+ Support for Freescale MXC/iMX-based family of processors
+
config ARCH_NETX
bool "Hilscher NetX based"
select CPU_ARM926T
help
This enables support for systems based on the Hynix HMS720x
-config ARCH_IMX
- bool "IMX"
- select CPU_ARM920T
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Motorola's i.MX family of processors (MX1, MXL).
-
config ARCH_IOP13XX
bool "IOP13xx-based"
depends on MMU
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
Support for the following Marvell Kirkwood series SoCs:
88F6180, 88F6192 and 88F6281.
-config ARCH_KS8695
- bool "Micrel/Kendin KS8695"
- select CPU_ARM922T
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- help
- Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
- System-on-Chip devices.
-
-config ARCH_NS9XXX
- bool "NetSilicon NS9xxx"
- select CPU_ARM926T
- select GENERIC_GPIO
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select HAVE_CLK
- help
- Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
- System.
-
- <http://www.digi.com/products/microprocessors/index.jsp>
-
config ARCH_LOKI
bool "Marvell Loki (88RC8480)"
select CPU_FEROCEON
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
Support for the following Marvell MV78xx0 series SoCs:
MV781x0, MV782x0.
-config ARCH_MXC
- bool "Freescale MXC/iMX-based"
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- select ARCH_MTD_XIP
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- help
- Support for Freescale MXC/iMX-based family of processors
-
config ARCH_ORION5X
bool "Marvell Orion"
depends on MMU
select CPU_FEROCEON
select PCI
select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select PLAT_ORION
Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
Orion-2 (5281), Orion-1-90 (6183).
+config ARCH_MMP
+ bool "Marvell PXA168/910"
+ depends on MMU
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
+ select COMMON_CLKDEV
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select TICK_ONESHOT
+ select PLAT_PXA
+ help
+ Support for Marvell's PXA168/910 processor line.
+
+config ARCH_KS8695
+ bool "Micrel/Kendin KS8695"
+ select CPU_ARM922T
+ select GENERIC_GPIO
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
+ System-on-Chip devices.
+
+config ARCH_NS9XXX
+ bool "NetSilicon NS9xxx"
+ select CPU_ARM926T
+ select GENERIC_GPIO
+ select GENERIC_TIME
+ select GENERIC_CLOCKEVENTS
+ select HAVE_CLK
+ help
+ Say Y here if you intend to run this kernel on a NetSilicon NS9xxx
+ System.
+
+ <http://www.digi.com/products/microprocessors/index.jsp>
+
+config ARCH_W90X900
+ bool "Nuvoton W90X900 CPU"
+ select CPU_ARM926T
+ select ARCH_REQUIRE_GPIOLIB
+ select GENERIC_GPIO
+ select COMMON_CLKDEV
+ help
+ Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
+ can login www.mcuos.com or www.nuvoton.com to know more.
+
config ARCH_PNX4008
bool "Philips Nexperia PNX4008 Mobile"
select CPU_ARM926T
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_MMP
- bool "Marvell PXA168/910"
- depends on MMU
- select GENERIC_GPIO
- select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
+config ARCH_MSM
+ bool "Qualcomm MSM"
+ select CPU_V6
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
- select TICK_ONESHOT
- select PLAT_PXA
help
- Support for Marvell's PXA168/910 processor line.
+ Support for Qualcomm MSM7K based systems. This runs on the ARM11
+ apps processor of the MSM7K and depends on a shared memory
+ interface to the ARM9 modem processor which runs the baseband stack
+ and controls some vital subsystems (clock and power control, etc).
config ARCH_RPC
bool "RiscPC"
select ZONE_DMA
select HAVE_IDE
select COMMON_CLKDEV
+ select GENERIC_ALLOCATOR
help
Support for TI's DaVinci platform.
help
Support for TI's OMAP platform (OMAP1 and OMAP2).
-config ARCH_MSM
- bool "Qualcomm MSM"
- select CPU_V6
- select GENERIC_TIME
- select GENERIC_CLOCKEVENTS
- help
- Support for Qualcomm MSM7K based systems. This runs on the ARM11
- apps processor of the MSM7K and depends on a shared memory
- interface to the ARM9 modem processor which runs the baseband stack
- and controls some vital subsystems (clock and power control, etc).
-
-config ARCH_W90X900
- bool "Nuvoton W90X900 CPU"
- select CPU_ARM926T
- help
- Support for Nuvoton (Winbond logic dept.) ARM9 processor,You
- can login www.mcuos.com or www.nuvoton.com to know more.
-
endchoice
source "arch/arm/mach-clps711x/Kconfig"
source "arch/arm/mach-lh7a40x/Kconfig"
-source "arch/arm/mach-imx/Kconfig"
-
source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
- depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
+ depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
+ MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+ depends on GENERIC_CLOCKEVENTS
select USE_GENERIC_SMP_HELPERS
+ select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
If you don't know what to do here, say N.
+config HAVE_ARM_SCU
+ bool
+ depends on SMP
+ help
+ This option enables support for the ARM system coherency unit
+
+config HAVE_ARM_TWD
+ bool
+ depends on SMP
+ help
+ This options enables support for the ARM timer and watchdog unit
+
choice
prompt "Memory split"
default VMSPLIT_3G
config LOCAL_TIMERS
bool "Use local timer interrupts"
- depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || REALVIEW_EB_A9MP)
+ depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
+ REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
default y
+ select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
config ARCH_HAS_HOLES_MEMORYMODEL
bool
- default n
# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
config LEDS
bool "Timer and CPU usage LEDs"
depends on ARCH_CDB89712 || ARCH_EBSA110 || \
- ARCH_EBSA285 || ARCH_IMX || ARCH_INTEGRATOR || \
+ ARCH_EBSA285 || ARCH_INTEGRATOR || \
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91 || ARCH_DAVINCI || \
- ARCH_KS8695 || MACH_RD88F5182
+ ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
menu "CPU Power Management"
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_PXA)
source "drivers/cpufreq/Kconfig"
If in doubt, say Y.
-config CPU_FREQ_IMX
- tristate "CPUfreq driver for i.MX CPUs"
- depends on ARCH_IMX && CPU_FREQ
- default n
- help
- This enables the CPUfreq driver for i.MX CPUs.
-
- If in doubt, say N.
+config CPU_FREQ_PXA
+ bool
+ depends on CPU_FREQ && ARCH_PXA && PXA25x
+ default y
+ select CPU_FREQ_DEFAULT_GOV_USERSPACE
endif
# Copyright (C) 1995-2001 by Russell King
LDFLAGS_vmlinux :=-p --no-undefined -X
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
CPPFLAGS_vmlinux.lds = -DTEXT_OFFSET=$(TEXT_OFFSET)
OBJCOPYFLAGS :=-O binary -R .note -R .note.gnu.build-id -R .comment -S
GZFLAGS :=-9
#Default value
head-y := arch/arm/kernel/head$(MMUEXT).o arch/arm/kernel/init_task.o
textofs-y := 0x00008000
-
- machine-$(CONFIG_ARCH_RPC) := rpc
- machine-$(CONFIG_ARCH_EBSA110) := ebsa110
- machine-$(CONFIG_FOOTBRIDGE) := footbridge
- machine-$(CONFIG_ARCH_SHARK) := shark
- machine-$(CONFIG_ARCH_SA1100) := sa1100
-ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
# SA1111 DMA bug: we don't want the kernel to live in precious DMA-able memory
- textofs-$(CONFIG_SA1111) := 0x00208000
+ifeq ($(CONFIG_ARCH_SA1100),y)
+textofs-$(CONFIG_SA1111) := 0x00208000
endif
- machine-$(CONFIG_ARCH_PXA) := pxa
- machine-$(CONFIG_ARCH_MMP) := mmp
- plat-$(CONFIG_PLAT_PXA) := pxa
- machine-$(CONFIG_ARCH_L7200) := l7200
- machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
- machine-$(CONFIG_ARCH_GEMINI) := gemini
- textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000
- machine-$(CONFIG_ARCH_CLPS711X) := clps711x
- machine-$(CONFIG_ARCH_IOP32X) := iop32x
- machine-$(CONFIG_ARCH_IOP33X) := iop33x
- machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
- plat-$(CONFIG_PLAT_IOP) := iop
- machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
- machine-$(CONFIG_ARCH_IXP2000) := ixp2000
- machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
- machine-$(CONFIG_ARCH_OMAP1) := omap1
- machine-$(CONFIG_ARCH_OMAP2) := omap2
- machine-$(CONFIG_ARCH_OMAP3) := omap2
- plat-$(CONFIG_ARCH_OMAP) := omap
- machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
- machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
- plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
- machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
- plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
- machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
- machine-$(CONFIG_ARCH_VERSATILE) := versatile
- machine-$(CONFIG_ARCH_IMX) := imx
- machine-$(CONFIG_ARCH_H720X) := h720x
- machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
- machine-$(CONFIG_ARCH_REALVIEW) := realview
- machine-$(CONFIG_ARCH_AT91) := at91
- machine-$(CONFIG_ARCH_EP93XX) := ep93xx
- machine-$(CONFIG_ARCH_PNX4008) := pnx4008
- machine-$(CONFIG_ARCH_NETX) := netx
- machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
- machine-$(CONFIG_ARCH_DAVINCI) := davinci
- machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
- machine-$(CONFIG_ARCH_KS8695) := ks8695
- plat-$(CONFIG_ARCH_MXC) := mxc
- machine-$(CONFIG_ARCH_MX2) := mx2
- machine-$(CONFIG_ARCH_MX3) := mx3
- machine-$(CONFIG_ARCH_MX1) := mx1
- machine-$(CONFIG_ARCH_ORION5X) := orion5x
- plat-$(CONFIG_PLAT_ORION) := orion
- machine-$(CONFIG_ARCH_MSM) := msm
- machine-$(CONFIG_ARCH_LOKI) := loki
- machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
- machine-$(CONFIG_ARCH_W90X900) := w90x900
+
+# Machine directory name. This list is sorted alphanumerically
+# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
+machine-$(CONFIG_ARCH_AT91) := at91
+machine-$(CONFIG_ARCH_CLPS711X) := clps711x
+machine-$(CONFIG_ARCH_DAVINCI) := davinci
+machine-$(CONFIG_ARCH_EBSA110) := ebsa110
+machine-$(CONFIG_ARCH_EP93XX) := ep93xx
+machine-$(CONFIG_ARCH_GEMINI) := gemini
+machine-$(CONFIG_ARCH_H720X) := h720x
+machine-$(CONFIG_ARCH_INTEGRATOR) := integrator
+machine-$(CONFIG_ARCH_IOP13XX) := iop13xx
+machine-$(CONFIG_ARCH_IOP32X) := iop32x
+machine-$(CONFIG_ARCH_IOP33X) := iop33x
+machine-$(CONFIG_ARCH_IXP2000) := ixp2000
+machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx
+machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx
+machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood
+machine-$(CONFIG_ARCH_KS8695) := ks8695
+machine-$(CONFIG_ARCH_L7200) := l7200
+machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x
+machine-$(CONFIG_ARCH_LOKI) := loki
+machine-$(CONFIG_ARCH_MMP) := mmp
+machine-$(CONFIG_ARCH_MSM) := msm
+machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
+machine-$(CONFIG_ARCH_MX1) := mx1
+machine-$(CONFIG_ARCH_MX2) := mx2
+machine-$(CONFIG_ARCH_MX3) := mx3
+machine-$(CONFIG_ARCH_NETX) := netx
+machine-$(CONFIG_ARCH_NS9XXX) := ns9xxx
+machine-$(CONFIG_ARCH_OMAP1) := omap1
+machine-$(CONFIG_ARCH_OMAP2) := omap2
+machine-$(CONFIG_ARCH_OMAP3) := omap2
+machine-$(CONFIG_ARCH_OMAP4) := omap2
+machine-$(CONFIG_ARCH_ORION5X) := orion5x
+machine-$(CONFIG_ARCH_PNX4008) := pnx4008
+machine-$(CONFIG_ARCH_PXA) := pxa
+machine-$(CONFIG_ARCH_REALVIEW) := realview
+machine-$(CONFIG_ARCH_RPC) := rpc
+machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443
+machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
+machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410
+machine-$(CONFIG_ARCH_SA1100) := sa1100
+machine-$(CONFIG_ARCH_SHARK) := shark
+machine-$(CONFIG_ARCH_VERSATILE) := versatile
+machine-$(CONFIG_ARCH_W90X900) := w90x900
+machine-$(CONFIG_FOOTBRIDGE) := footbridge
+
+# Platform directory name. This list is sorted alphanumerically
+# by CONFIG_* macro name.
+plat-$(CONFIG_ARCH_MXC) := mxc
+plat-$(CONFIG_ARCH_OMAP) := omap
+plat-$(CONFIG_PLAT_IOP) := iop
+plat-$(CONFIG_PLAT_ORION) := orion
+plat-$(CONFIG_PLAT_PXA) := pxa
+plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c
+plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
OBJS += head-sharpsl.o
endif
-ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
ifeq ($(CONFIG_CPU_CP15),y)
OBJS += big-endian.o
else
# linker symbols. We only define initrd_phys and params_phys if the
# machine class defined the corresponding makefile variable.
LDFLAGS_vmlinux := --defsym zreladdr=$(ZRELADDR)
+ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
+LDFLAGS_vmlinux += --be8
+endif
ifneq ($(INITRD_PHYS),)
LDFLAGS_vmlinux += --defsym initrd_phys=$(INITRD_PHYS)
endif
mrc p15, 0, r0, c1, c0, 0 @ read control reg
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x0030
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ orr r0, r0, #1 << 25 @ big-endian page tables
+#endif
bl __common_mmu_cache_on
mov r0, #0
mcr p15, 0, r0, c8, c7, 0 @ flush I,D TLBs
mrc p15, 0, r0, c1, c0, 0 @ read control reg
orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement
orr r0, r0, #0x003c @ write buffer
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ orr r0, r0, #1 << 25 @ big-endian page tables
+#endif
orrne r0, r0, #1 @ MMU enabled
movne r1, #-1
mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer
config ARM_VIC
bool
+config ARM_VIC_NR
+ int
+ default 2
+ depends on ARM_VIC
+ help
+ The maximum number of VICs available in the system, for
+ power management.
+
config ICST525
bool
}
EXPORT_SYMBOL(clkdev_alloc);
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+ struct device *dev)
+{
+ struct clk *r = clk_get(dev, id);
+ struct clk_lookup *l;
+
+ if (IS_ERR(r))
+ return PTR_ERR(r);
+
+ l = clkdev_alloc(r, alias, alias_dev_name);
+ clk_put(r);
+ if (!l)
+ return -ENODEV;
+ clkdev_add(l);
+ return 0;
+}
+EXPORT_SYMBOL(clk_add_alias);
+
/*
* clkdev_drop - remove a clock dynamically allocated
*/
#include <linux/init.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/sysdev.h>
#include <asm/mach/irq.h>
#include <asm/hardware/vic.h>
writel(1 << irq, base + VIC_INT_ENABLE);
}
+/**
+ * vic_init2 - common initialisation code
+ * @base: Base of the VIC.
+ *
+ * Common initialisation code for registeration
+ * and resume.
+*/
+static void vic_init2(void __iomem *base)
+{
+ int i;
+
+ for (i = 0; i < 16; i++) {
+ void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
+ writel(VIC_VECT_CNTL_ENABLE | i, reg);
+ }
+
+ writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+}
+
+#if defined(CONFIG_PM)
+/**
+ * struct vic_device - VIC PM device
+ * @sysdev: The system device which is registered.
+ * @irq: The IRQ number for the base of the VIC.
+ * @base: The register base for the VIC.
+ * @resume_sources: A bitmask of interrupts for resume.
+ * @resume_irqs: The IRQs enabled for resume.
+ * @int_select: Save for VIC_INT_SELECT.
+ * @int_enable: Save for VIC_INT_ENABLE.
+ * @soft_int: Save for VIC_INT_SOFT.
+ * @protect: Save for VIC_PROTECT.
+ */
+struct vic_device {
+ struct sys_device sysdev;
+
+ void __iomem *base;
+ int irq;
+ u32 resume_sources;
+ u32 resume_irqs;
+ u32 int_select;
+ u32 int_enable;
+ u32 soft_int;
+ u32 protect;
+};
+
+/* we cannot allocate memory when VICs are initially registered */
+static struct vic_device vic_devices[CONFIG_ARM_VIC_NR];
+
+static inline struct vic_device *to_vic(struct sys_device *sys)
+{
+ return container_of(sys, struct vic_device, sysdev);
+}
+
+static int vic_id;
+
+static int vic_class_resume(struct sys_device *dev)
+{
+ struct vic_device *vic = to_vic(dev);
+ void __iomem *base = vic->base;
+
+ printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
+
+ /* re-initialise static settings */
+ vic_init2(base);
+
+ writel(vic->int_select, base + VIC_INT_SELECT);
+ writel(vic->protect, base + VIC_PROTECT);
+
+ /* set the enabled ints and then clear the non-enabled */
+ writel(vic->int_enable, base + VIC_INT_ENABLE);
+ writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR);
+
+ /* and the same for the soft-int register */
+
+ writel(vic->soft_int, base + VIC_INT_SOFT);
+ writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR);
+
+ return 0;
+}
+
+static int vic_class_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct vic_device *vic = to_vic(dev);
+ void __iomem *base = vic->base;
+
+ printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
+
+ vic->int_select = readl(base + VIC_INT_SELECT);
+ vic->int_enable = readl(base + VIC_INT_ENABLE);
+ vic->soft_int = readl(base + VIC_INT_SOFT);
+ vic->protect = readl(base + VIC_PROTECT);
+
+ /* set the interrupts (if any) that are used for
+ * resuming the system */
+
+ writel(vic->resume_irqs, base + VIC_INT_ENABLE);
+ writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR);
+
+ return 0;
+}
+
+struct sysdev_class vic_class = {
+ .name = "vic",
+ .suspend = vic_class_suspend,
+ .resume = vic_class_resume,
+};
+
+/**
+ * vic_pm_register - Register a VIC for later power management control
+ * @base: The base address of the VIC.
+ * @irq: The base IRQ for the VIC.
+ * @resume_sources: bitmask of interrupts allowed for resume sources.
+ *
+ * Register the VIC with the system device tree so that it can be notified
+ * of suspend and resume requests and ensure that the correct actions are
+ * taken to re-instate the settings on resume.
+ */
+static void __init vic_pm_register(void __iomem *base, unsigned int irq, u32 resume_sources)
+{
+ struct vic_device *v;
+
+ if (vic_id >= ARRAY_SIZE(vic_devices))
+ printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
+ else {
+ v = &vic_devices[vic_id];
+ v->base = base;
+ v->resume_sources = resume_sources;
+ v->irq = irq;
+ vic_id++;
+ }
+}
+
+/**
+ * vic_pm_init - initicall to register VIC pm
+ *
+ * This is called via late_initcall() to register
+ * the resources for the VICs due to the early
+ * nature of the VIC's registration.
+*/
+static int __init vic_pm_init(void)
+{
+ struct vic_device *dev = vic_devices;
+ int err;
+ int id;
+
+ if (vic_id == 0)
+ return 0;
+
+ err = sysdev_class_register(&vic_class);
+ if (err) {
+ printk(KERN_ERR "%s: cannot register class\n", __func__);
+ return err;
+ }
+
+ for (id = 0; id < vic_id; id++, dev++) {
+ dev->sysdev.id = id;
+ dev->sysdev.cls = &vic_class;
+
+ err = sysdev_register(&dev->sysdev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to register device\n",
+ __func__);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+late_initcall(vic_pm_init);
+
+static struct vic_device *vic_from_irq(unsigned int irq)
+{
+ struct vic_device *v = vic_devices;
+ unsigned int base_irq = irq & ~31;
+ int id;
+
+ for (id = 0; id < vic_id; id++, v++) {
+ if (v->irq == base_irq)
+ return v;
+ }
+
+ return NULL;
+}
+
+static int vic_set_wake(unsigned int irq, unsigned int on)
+{
+ struct vic_device *v = vic_from_irq(irq);
+ unsigned int off = irq & 31;
+
+ if (!v)
+ return -EINVAL;
+
+ if (on)
+ v->resume_irqs |= 1 << off;
+ else
+ v->resume_irqs &= ~(1 << off);
+
+ return 0;
+}
+
+#else
+static inline void vic_pm_register(void __iomem *base, unsigned int irq, u32 arg1) { }
+
+#define vic_set_wake NULL
+#endif /* CONFIG_PM */
+
static struct irq_chip vic_chip = {
.name = "VIC",
.ack = vic_mask_irq,
.mask = vic_mask_irq,
.unmask = vic_unmask_irq,
+ .set_wake = vic_set_wake,
};
/**
* @base: iomem base address
* @irq_start: starting interrupt number, must be muliple of 32
* @vic_sources: bitmask of interrupt sources to allow
+ * @resume_sources: bitmask of interrupt sources to allow for resume
*/
void __init vic_init(void __iomem *base, unsigned int irq_start,
- u32 vic_sources)
+ u32 vic_sources, u32 resume_sources)
{
unsigned int i;
writel(value, base + VIC_PL190_VECT_ADDR);
}
- for (i = 0; i < 16; i++) {
- void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4);
- writel(VIC_VECT_CNTL_ENABLE | i, reg);
- }
-
- writel(32, base + VIC_PL190_DEF_VECT_ADDR);
+ vic_init2(base);
for (i = 0; i < 32; i++) {
if (vic_sources & (1 << i)) {
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
}
+
+ vic_pm_register(base, irq_start, resume_sources);
}
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Wed Apr 15 08:16:53 2009
+# Linux kernel version: 2.6.30-rc7
+# Tue May 26 07:24:28 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_W90X900 is not set
+CONFIG_AINTC=y
#
# TI DaVinci Implementations
# DaVinci Core Type
#
CONFIG_ARCH_DAVINCI_DM644x=y
+CONFIG_ARCH_DAVINCI_DM355=y
+CONFIG_ARCH_DAVINCI_DM646x=y
#
# DaVinci Board Type
#
CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_DAVINCI_DM355_EVM=y
+CONFIG_MACH_DM355_LEOPARD=y
+CONFIG_MACH_DAVINCI_DM6467_EVM=y
CONFIG_DAVINCI_MUX=y
CONFIG_DAVINCI_MUX_DEBUG=y
CONFIG_DAVINCI_MUX_WARNINGS=y
CONFIG_HZ=100
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
# CONFIG_HIGHMEM is not set
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_TI_DAVINCI_EMAC=y
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
+# CONFIG_MFD_DM355EVM_MSP is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_TPS65010 is not set
# MMC/SD/SDIO Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_DAVINCI is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_DECOMPRESS_GZIP=y
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20-rc1
-# Sat Dec 16 06:05:24 2006
+# Linux kernel version: 2.6.30-rc3
+# Tue May 19 12:26:49 2009
#
CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_GENERIC_IRQ_PROBE=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
CONFIG_SHMEM=y
-CONFIG_SLAB=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_FREEZER is not set
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_EBSA110 is not set
CONFIG_ARCH_EP93XX=y
# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
#
#
# EP93xx Platforms
#
+# CONFIG_EP93XX_SDCE0_PHYS_OFFSET is not set
+CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET=y
CONFIG_MACH_ADSSPHERE=y
+CONFIG_MACH_EDB93XX=y
+CONFIG_MACH_EDB9301=y
CONFIG_MACH_EDB9302=y
-CONFIG_MACH_EDB9302A=y
+CONFIG_MACH_EDB9307=y
CONFIG_MACH_EDB9312=y
CONFIG_MACH_EDB9315=y
-CONFIG_MACH_EDB9315A=y
CONFIG_MACH_GESBC9312=y
+CONFIG_MACH_MICRO9=y
+CONFIG_MACH_MICRO9H=y
+CONFIG_MACH_MICRO9M=y
+CONFIG_MACH_MICRO9L=y
CONFIG_MACH_TS72XX=y
+CONFIG_EP93XX_EARLY_UART1=y
+# CONFIG_EP93XX_EARLY_UART2 is not set
+# CONFIG_EP93XX_EARLY_UART3 is not set
#
# Processor Type
CONFIG_CPU_ARM920T=y
CONFIG_CPU_32v4T=y
CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_PABRT_NOIFAR=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_OUTER_CACHE is not set
CONFIG_ARM_VIC=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
CONFIG_ARM_AMBA=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
#
# Kernel Features
#
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=100
-# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/nfs ip=bootp"
# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
#
# Floating point emulation
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
-# CONFIG_APM is not set
-
-#
-# Networking
-#
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_SIT is not set
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=1
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_TS7250=y
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_TS7250 is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
+# LPDDR flash memory drivers
#
+# CONFIG_MTD_LPDDR is not set
#
-# Block devices
+# UBI - Unsorted block images
#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
CONFIG_BLK_DEV_NBD=y
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_EP93XX_ETH=y
+# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
+# Wireless LAN
#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
#
-# Wireless LAN (non-hamradio)
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_NET_RADIO is not set
#
-# Wan interfaces
+# USB Network Adapters
#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+CONFIG_USB_RTL8150=y
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
#
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_EP93XX_WATCHDOG=y
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
-# TPM devices
+# I2C Hardware Bus support
#
-# CONFIG_TCG_TPM is not set
#
-# I2C support
+# I2C system bus drivers (mostly embedded / system-on-chip)
#
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
#
-# I2C Algorithms
+# External I2C/SMBus adapter drivers
#
-CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
#
-# I2C Hardware Bus support
+# Other I2C/SMBus bus drivers
#
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_PCA_ISA is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
-CONFIG_EEPROM_LEGACY=y
+# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
CONFIG_I2C_DEBUG_CORE=y
CONFIG_I2C_DEBUG_ALGO=y
CONFIG_I2C_DEBUG_BUS=y
CONFIG_I2C_DEBUG_CHIP=y
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# SPI support
+# Memory mapped GPIO expanders:
#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
#
-# Dallas's 1-wire bus
+# I2C GPIO expanders:
#
-# CONFIG_W1 is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
#
-# Hardware Monitoring support
+# PCI GPIO expanders:
#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
#
-# Misc devices
+# Watchdog Device Drivers
#
-# CONFIG_TIFM_CORE is not set
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_EP93XX_WATCHDOG=y
#
-# LED devices
+# USB-based Watchdog Cards
#
-# CONFIG_NEW_LEDS is not set
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
-# LED drivers
+# Sonics Silicon Backplane
#
+# CONFIG_SSB is not set
#
-# LED Triggers
+# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
-# Digital Video Broadcasting Devices
+# Multimedia drivers
#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
+# CONFIG_DAB is not set
#
# Graphics support
#
-# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
-# Sound
+# Display device support
#
+# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
-
-#
-# USB support
-#
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
CONFIG_USB=y
CONFIG_USB_DEBUG=y
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
+CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
-# CONFIG_USB_MULTITHREAD_PROBE is not set
# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
-#
-# USB Input Devices
-#
-
-#
-# USB HID Boot Protocol drivers
-#
-
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-CONFIG_USB_RTL8150=y
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
#
# USB port drivers
#
-
-#
-# USB Serial Converter support
-#
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_CONSOLE=y
+# CONFIG_USB_EZUSB is not set
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=y
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
-# MMC/SD Card support
+# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
-
-#
-# Real Time Clock
-#
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# RTC drivers
+# I2C RTC drivers
#
-# CONFIG_RTC_DRV_X1205 is not set
CONFIG_RTC_DRV_DS1307=y
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
-# CONFIG_RTC_DRV_TEST is not set
-# CONFIG_RTC_DRV_V3020 is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
+# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_ICEDCC is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
#
-# Cryptographic options
+# Random Number Generation
#
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
CONFIG_MACH_DB88F6281_BP=y
CONFIG_MACH_RD88F6192_NAS=y
CONFIG_MACH_RD88F6281=y
+CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_TS219=y
CONFIG_PLAT_ORION=y
#
# CPU Power Management
#
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
#
# Floating point emulation
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc1
+# Tue Apr 14 16:58:09 2009
+#
+CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+CONFIG_ARCH_MXC=y
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# Freescale MXC Implementations
+#
+# CONFIG_ARCH_MX1 is not set
+CONFIG_ARCH_MX2=y
+# CONFIG_ARCH_MX3 is not set
+CONFIG_MACH_MX21=y
+# CONFIG_MACH_MX27 is not set
+
+#
+# MX2 platforms:
+#
+CONFIG_MACH_MX21ADS=y
+# CONFIG_MXC_IRQ_PRIOR is not set
+CONFIG_MXC_PWM=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_MXC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_IMX=y
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+# CONFIG_VFAT_FS is not set
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc5
+# Mon May 18 14:01:52 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+CONFIG_MACH_OMAP3EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+CONFIG_SMC911X=y
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=m
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc7
+# Tue Jun 9 12:36:23 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+
+#
+# TI OMAP Implementations
+#
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+CONFIG_ARCH_OMAP4=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP_4430SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+# CONFIG_ARM_THUMB is not set
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
+CONFIG_HAVE_MLOCK=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600000,20M ramdisk_size=20480"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.27-rc5
+# Fri Oct 10 11:49:41 2008
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
+# CONFIG_HAVE_IOREMAP_PROT is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_ARCH_TRACEHOOK is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_USE_GENERIC_SMP_HELPERS is not set
+CONFIG_HAVE_CLK=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS7500 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_MSM7X00A is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+CONFIG_OMAP_SERIAL_WAKE=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+CONFIG_MACH_OMAP_ZOOM2=y
+# CONFIG_MACH_OVERO is not set
+
+#
+# Boot options
+#
+
+#
+# Power management
+#
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+# CONFIG_OUTER_CACHE is not set
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_PHONET is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_NVRAM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_ISP1301_OMAP is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+
+#
+# Voltage and Current regulators
+#
+# CONFIG_REGULATOR is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_PRINT_QUOTA_WARNING=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+# CONFIG_SUNRPC_REGISTER_V4 is not set
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_HAVE_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+# CONFIG_FTRACE is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_HW=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM_TIMERIOMEM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc8-git8
-# Sat Nov 15 10:05:00 2008
+# Linux kernel version: 2.6.30
+# Wed Jun 10 22:09:25 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_MMU=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+# CONFIG_INITRAMFS_COMPRESSION_NONE is not set
+# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
+# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
+# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-CONFIG_BLK_DEV_IO_TRACE=y
-CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
CONFIG_ARCH_W90X900=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_CPU_W90P910=y
#
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
#
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 initrd=0xa00000,4000000 mem=64M"
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
# CONFIG_XIP_KERNEL is not set
CONFIG_KEXEC=y
CONFIG_ATAGS_PROC=y
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
#
# Serial drivers
#
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_W90X900=y
-# CONFIG_SERIAL_W90X900_PORT1 is not set
-# CONFIG_SERIAL_W90X900_PORT2 is not set
-# CONFIG_SERIAL_W90X900_PORT3 is not set
-# CONFIG_SERIAL_W90X900_PORT4 is not set
-CONFIG_SERIAL_W90X900_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
#
# Multimedia devices
CONFIG_DUMMY_CONSOLE=y
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
#
# Partition Types
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_MEMORY_INIT=y
-CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
.align 3; \
.long 9999b,9001f; \
.previous
+
+/*
+ * SMP data memory barrier
+ */
+ .macro smp_dmb
+#ifdef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7
+ dmb
+#elif __LINUX_ARM_ARCH__ == 6
+ mcr p15, 0, r0, c7, c10, 5 @ dmb
+#endif
+#endif
+ .endm
: "cc");
}
+static inline void atomic_add(int i, atomic_t *v)
+{
+ unsigned long tmp;
+ int result;
+
+ __asm__ __volatile__("@ atomic_add\n"
+"1: ldrex %0, [%2]\n"
+" add %0, %0, %3\n"
+" strex %1, %0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+}
+
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
+ smp_mb();
+
__asm__ __volatile__("@ atomic_add_return\n"
"1: ldrex %0, [%2]\n"
" add %0, %0, %3\n"
: "r" (&v->counter), "Ir" (i)
: "cc");
+ smp_mb();
+
return result;
}
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ unsigned long tmp;
+ int result;
+
+ __asm__ __volatile__("@ atomic_sub\n"
+"1: ldrex %0, [%2]\n"
+" sub %0, %0, %3\n"
+" strex %1, %0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+}
+
static inline int atomic_sub_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
+ smp_mb();
+
__asm__ __volatile__("@ atomic_sub_return\n"
"1: ldrex %0, [%2]\n"
" sub %0, %0, %3\n"
: "r" (&v->counter), "Ir" (i)
: "cc");
+ smp_mb();
+
return result;
}
{
unsigned long oldval, res;
+ smp_mb();
+
do {
__asm__ __volatile__("@ atomic_cmpxchg\n"
"ldrex %1, [%2]\n"
: "cc");
} while (res);
+ smp_mb();
+
return oldval;
}
return val;
}
+#define atomic_add(i, v) (void) atomic_add_return(i, v)
static inline int atomic_sub_return(int i, atomic_t *v)
{
return val;
}
+#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
}
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-#define atomic_add(i, v) (void) atomic_add_return(i, v)
-#define atomic_inc(v) (void) atomic_add_return(1, v)
-#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
-#define atomic_dec(v) (void) atomic_sub_return(1, v)
+#define atomic_inc(v) atomic_add(1, v)
+#define atomic_dec(v) atomic_sub(1, v)
#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
+#define smp_mb__before_atomic_dec() smp_mb()
+#define smp_mb__after_atomic_dec() smp_mb()
+#define smp_mb__before_atomic_inc() smp_mb()
+#define smp_mb__after_atomic_inc() smp_mb()
#include <asm-generic/atomic.h>
#endif
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
+#define CPUID_EXT_PFR0 "c1, 0"
+#define CPUID_EXT_PFR1 "c1, 1"
+#define CPUID_EXT_DFR0 "c1, 2"
+#define CPUID_EXT_AFR0 "c1, 3"
+#define CPUID_EXT_MMFR0 "c1, 4"
+#define CPUID_EXT_MMFR1 "c1, 5"
+#define CPUID_EXT_MMFR2 "c1, 6"
+#define CPUID_EXT_MMFR3 "c1, 7"
+#define CPUID_EXT_ISAR0 "c2, 0"
+#define CPUID_EXT_ISAR1 "c2, 1"
+#define CPUID_EXT_ISAR2 "c2, 2"
+#define CPUID_EXT_ISAR3 "c2, 3"
+#define CPUID_EXT_ISAR4 "c2, 4"
+#define CPUID_EXT_ISAR5 "c2, 5"
+
#ifdef CONFIG_CPU_CP15
#define read_cpuid(reg) \
({ \
: "cc"); \
__val; \
})
+#define read_cpuid_ext(ext_reg) \
+ ({ \
+ unsigned int __val; \
+ asm("mrc p15, 0, %0, c0, " ext_reg \
+ : "=r" (__val) \
+ : \
+ : "cc"); \
+ __val; \
+ })
#else
extern unsigned int processor_id;
#define read_cpuid(reg) (processor_id)
+#define read_cpuid_ext(reg) 0
#endif
/*
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
-/* An odd number of words will be pushed after this alignment, so
- deliberately misalign the value. */
-#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
+++ /dev/null
-#ifndef __ASM_HARDWARE_TWD_H
-#define __ASM_HARDWARE_TWD_H
-
-#define TWD_TIMER_LOAD 0x00
-#define TWD_TIMER_COUNTER 0x04
-#define TWD_TIMER_CONTROL 0x08
-#define TWD_TIMER_INTSTAT 0x0C
-
-#define TWD_WDOG_LOAD 0x20
-#define TWD_WDOG_COUNTER 0x24
-#define TWD_WDOG_CONTROL 0x28
-#define TWD_WDOG_INTSTAT 0x2C
-#define TWD_WDOG_RESETSTAT 0x30
-#define TWD_WDOG_DISABLE 0x34
-
-#define TWD_TIMER_CONTROL_ENABLE (1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT (0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
-
-#endif
#define L2X0_CACHE_TYPE 0x004
#define L2X0_CTRL 0x100
#define L2X0_AUX_CTRL 0x104
+#define L2X0_TAG_LATENCY_CTRL 0x108
+#define L2X0_DATA_LATENCY_CTRL 0x10C
#define L2X0_EVENT_CNT_CTRL 0x200
#define L2X0_EVENT_CNT1_CFG 0x204
#define L2X0_EVENT_CNT0_CFG 0x208
--- /dev/null
+/* arch/arm/include/asm/hardware/pl080.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * ARM PrimeCell PL080 DMA controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* Note, there are some Samsung updates to this controller block which
+ * make it not entierly compatible with the PL080 specification from
+ * ARM. When in doubt, check the Samsung documentation first.
+ *
+ * The Samsung defines are PL080S, and add an extra controll register,
+ * the ability to move more than 2^11 counts of data and some extra
+ * OneNAND features.
+*/
+
+#define PL080_INT_STATUS (0x00)
+#define PL080_TC_STATUS (0x04)
+#define PL080_TC_CLEAR (0x08)
+#define PL080_ERR_STATUS (0x0C)
+#define PL080_ERR_CLEAR (0x10)
+#define PL080_RAW_TC_STATUS (0x14)
+#define PL080_RAW_ERR_STATUS (0x18)
+#define PL080_EN_CHAN (0x1c)
+#define PL080_SOFT_BREQ (0x20)
+#define PL080_SOFT_SREQ (0x24)
+#define PL080_SOFT_LBREQ (0x28)
+#define PL080_SOFT_LSREQ (0x2C)
+
+#define PL080_CONFIG (0x30)
+#define PL080_CONFIG_M2_BE (1 << 2)
+#define PL080_CONFIG_M1_BE (1 << 1)
+#define PL080_CONFIG_ENABLE (1 << 0)
+
+#define PL080_SYNC (0x34)
+
+/* Per channel configuration registers */
+
+#define PL008_Cx_STRIDE (0x20)
+#define PL080_Cx_BASE(x) ((0x100 + (x * 0x20)))
+#define PL080_Cx_SRC_ADDR(x) ((0x100 + (x * 0x20)))
+#define PL080_Cx_DST_ADDR(x) ((0x104 + (x * 0x20)))
+#define PL080_Cx_LLI(x) ((0x108 + (x * 0x20)))
+#define PL080_Cx_CONTROL(x) ((0x10C + (x * 0x20)))
+#define PL080_Cx_CONFIG(x) ((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONTROL2(x) ((0x110 + (x * 0x20)))
+#define PL080S_Cx_CONFIG(x) ((0x114 + (x * 0x20)))
+
+#define PL080_CH_SRC_ADDR (0x00)
+#define PL080_CH_DST_ADDR (0x04)
+#define PL080_CH_LLI (0x08)
+#define PL080_CH_CONTROL (0x0C)
+#define PL080_CH_CONFIG (0x10)
+#define PL080S_CH_CONTROL2 (0x10)
+#define PL080S_CH_CONFIG (0x14)
+
+#define PL080_LLI_ADDR_MASK (0x3fffffff << 2)
+#define PL080_LLI_ADDR_SHIFT (2)
+#define PL080_LLI_LM_AHB2 (1 << 0)
+
+#define PL080_CONTROL_TC_IRQ_EN (1 << 31)
+#define PL080_CONTROL_PROT_MASK (0x7 << 28)
+#define PL080_CONTROL_PROT_SHIFT (28)
+#define PL080_CONTROL_PROT_SYS (1 << 28)
+#define PL080_CONTROL_DST_INCR (1 << 27)
+#define PL080_CONTROL_SRC_INCR (1 << 26)
+#define PL080_CONTROL_DST_AHB2 (1 << 25)
+#define PL080_CONTROL_SRC_AHB2 (1 << 24)
+#define PL080_CONTROL_DWIDTH_MASK (0x7 << 21)
+#define PL080_CONTROL_DWIDTH_SHIFT (21)
+#define PL080_CONTROL_SWIDTH_MASK (0x7 << 18)
+#define PL080_CONTROL_SWIDTH_SHIFT (18)
+#define PL080_CONTROL_DB_SIZE_MASK (0x7 << 15)
+#define PL080_CONTROL_DB_SIZE_SHIFT (15)
+#define PL080_CONTROL_SB_SIZE_MASK (0x7 << 12)
+#define PL080_CONTROL_SB_SIZE_SHIFT (12)
+#define PL080_CONTROL_TRANSFER_SIZE_MASK (0xfff << 0)
+#define PL080_CONTROL_TRANSFER_SIZE_SHIFT (0)
+
+#define PL080_BSIZE_1 (0x0)
+#define PL080_BSIZE_4 (0x1)
+#define PL080_BSIZE_8 (0x2)
+#define PL080_BSIZE_16 (0x3)
+#define PL080_BSIZE_32 (0x4)
+#define PL080_BSIZE_64 (0x5)
+#define PL080_BSIZE_128 (0x6)
+#define PL080_BSIZE_256 (0x7)
+
+#define PL080_WIDTH_8BIT (0x0)
+#define PL080_WIDTH_16BIT (0x1)
+#define PL080_WIDTH_32BIT (0x2)
+
+#define PL080_CONFIG_HALT (1 << 18)
+#define PL080_CONFIG_ACTIVE (1 << 17) /* RO */
+#define PL080_CONFIG_LOCK (1 << 16)
+#define PL080_CONFIG_TC_IRQ_MASK (1 << 15)
+#define PL080_CONFIG_ERR_IRQ_MASK (1 << 14)
+#define PL080_CONFIG_FLOW_CONTROL_MASK (0x7 << 11)
+#define PL080_CONFIG_FLOW_CONTROL_SHIFT (11)
+#define PL080_CONFIG_DST_SEL_MASK (0xf << 6)
+#define PL080_CONFIG_DST_SEL_SHIFT (6)
+#define PL080_CONFIG_SRC_SEL_MASK (0xf << 1)
+#define PL080_CONFIG_SRC_SEL_SHIFT (1)
+#define PL080_CONFIG_ENABLE (1 << 0)
+
+#define PL080_FLOW_MEM2MEM (0x0)
+#define PL080_FLOW_MEM2PER (0x1)
+#define PL080_FLOW_PER2MEM (0x2)
+#define PL080_FLOW_SRC2DST (0x3)
+#define PL080_FLOW_SRC2DST_DST (0x4)
+#define PL080_FLOW_MEM2PER_PER (0x5)
+#define PL080_FLOW_PER2MEM_PER (0x6)
+#define PL080_FLOW_SRC2DST_SRC (0x7)
+
+/* DMA linked list chain structure */
+
+struct pl080_lli {
+ u32 src_addr;
+ u32 dst_addr;
+ u32 next_lli;
+ u32 control0;
+};
+
+struct pl080s_lli {
+ u32 src_addr;
+ u32 dst_addr;
+ u32 next_lli;
+ u32 control0;
+ u32 control1;
+};
+
#define VIC_PL192_VECT_ADDR 0xF00
#ifndef __ASSEMBLY__
-void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources);
+void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources, u32 resume_sources);
#endif
#endif
--- /dev/null
+/*
+ * arch/arm/include/asm/localtimer.h
+ *
+ * Copyright (C) 2004-2005 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARM_LOCALTIMER_H
+#define __ASM_ARM_LOCALTIMER_H
+
+struct clock_event_device;
+
+/*
+ * Setup a per-cpu timer, whether it be a local timer or dummy broadcast
+ */
+void percpu_timer_setup(void);
+
+/*
+ * Called from assembly, this is the local timer IRQ handler
+ */
+asmlinkage void do_local_timer(struct pt_regs *);
+
+
+#ifdef CONFIG_LOCAL_TIMERS
+
+#ifdef CONFIG_HAVE_ARM_TWD
+
+#include "smp_twd.h"
+
+#define local_timer_ack() twd_timer_ack()
+#define local_timer_stop() twd_timer_stop()
+
+#else
+
+/*
+ * Platform provides this to acknowledge a local timer IRQ.
+ * Returns true if the local timer IRQ is to be processed.
+ */
+int local_timer_ack(void);
+
+/*
+ * Stop a local timer interrupt.
+ */
+void local_timer_stop(void);
+
+#endif
+
+/*
+ * Setup a local timer interrupt for a CPU.
+ */
+void local_timer_setup(struct clock_event_device *);
+
+#else
+
+static inline void local_timer_stop(void)
+{
+}
+
+#endif
+
+#endif
#ifdef CONFIG_MMU
extern void iotable_init(struct map_desc *, int);
+
+struct mem_type;
+extern const struct mem_type *get_mem_type(unsigned int type);
+/*
+ * external interface to remap single page with appropriate type
+ */
+extern int ioremap_page(unsigned long virt, unsigned long phys,
+ const struct mem_type *mtype);
#else
#define iotable_init(map,num) do { } while (0)
#endif
return __va(ptr);
}
-#define pmd_page(pmd) virt_to_page(__va(pmd_val(pmd)))
+#define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd)))
/*
* Conversion functions: convert a page and protection to a page entry,
regs->ARM_cpsr = USR26_MODE; \
if (elf_hwcap & HWCAP_THUMB && pc & 1) \
regs->ARM_cpsr |= PSR_T_BIT; \
+ regs->ARM_cpsr |= PSR_ENDSTATE; \
regs->ARM_pc = pc & ~1; /* pc */ \
regs->ARM_sp = sp; /* sp */ \
regs->ARM_r2 = stack[2]; /* r2 (envp) */ \
#define PSR_F_BIT 0x00000040
#define PSR_I_BIT 0x00000080
#define PSR_A_BIT 0x00000100
+#define PSR_E_BIT 0x00000200
#define PSR_J_BIT 0x01000000
#define PSR_Q_BIT 0x08000000
#define PSR_V_BIT 0x10000000
#define PSR_x 0x0000ff00 /* Extension */
#define PSR_c 0x000000ff /* Control */
+/*
+ * ARMv7 groups of APSR bits
+ */
+#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */
+#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */
+#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */
+
+/*
+ * Default endianness state
+ */
+#ifdef CONFIG_CPU_ENDIAN_BE8
+#define PSR_ENDSTATE PSR_E_BIT
+#else
+#define PSR_ENDSTATE 0
+#endif
+
#ifndef __ASSEMBLY__
/*
#define SZ_512 0x00000200
#define SZ_1K 0x00000400
+#define SZ_2K 0x00000800
#define SZ_4K 0x00001000
#define SZ_8K 0x00002000
#define SZ_16K 0x00004000
asmlinkage void do_IPI(struct pt_regs *regs);
/*
- * Setup the SMP cpu_possible_map
+ * Setup the set of possible CPUs (via set_cpu_possible)
*/
extern void smp_init_cpus(void);
*/
extern void smp_cross_call(const struct cpumask *mask);
-/*
- * Broadcast a clock event to other CPUs.
- */
-extern void smp_timer_broadcast(const struct cpumask *mask);
-
/*
* Boot a secondary CPU, and assign it the specified idle task.
* This also gives us the initial stack to use for this CPU.
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
-/*
- * Local timer interrupt handling function (can be IPI'ed).
- */
-extern void local_timer_interrupt(void);
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/*
- * Stop a local timer interrupt.
- */
-extern void local_timer_stop(void);
-
-/*
- * Platform provides this to acknowledge a local timer IRQ
- */
-extern int local_timer_ack(void);
-
-#else
-
-static inline void local_timer_stop(void)
-{
-}
-
-#endif
-
-/*
- * Setup a local timer interrupt for a CPU.
- */
-extern void local_timer_setup(void);
-
/*
* show local interrupt info
*/
extern void show_local_irqs(struct seq_file *);
-/*
- * Called from assembly, this is the local timer IRQ handler
- */
-asmlinkage void do_local_timer(struct pt_regs *);
-
#endif /* ifndef __ASM_ARM_SMP_H */
--- /dev/null
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+unsigned int scu_get_core_count(void __iomem *);
+void scu_enable(void __iomem *);
+
+#endif
--- /dev/null
+#ifndef __ASMARM_SMP_TWD_H
+#define __ASMARM_SMP_TWD_H
+
+struct clock_event_device;
+
+extern void __iomem *twd_base;
+
+void twd_timer_stop(void);
+int twd_timer_ack(void);
+void twd_timer_setup(struct clock_event_device *);
+
+#endif
unsigned int tmp;
#endif
+ smp_mb();
+
switch (size) {
#if __LINUX_ARM_ARCH__ >= 6
case 1:
__bad_xchg(ptr, size), ret = 0;
break;
}
+ smp_mb();
return ret;
}
#include <asm-generic/cmpxchg-local.h>
+#if __LINUX_ARM_ARCH__ < 6
+
+#ifdef CONFIG_SMP
+#error "SMP is not supported on this platform"
+#endif
+
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
#include <asm-generic/cmpxchg.h>
#endif
+#else /* __LINUX_ARM_ARCH__ >= 6 */
+
+extern void __bad_cmpxchg(volatile void *ptr, int size);
+
+/*
+ * cmpxchg only support 32-bits operands on ARMv6.
+ */
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long oldval, res;
+
+ switch (size) {
+#ifdef CONFIG_CPU_32v6K
+ case 1:
+ do {
+ asm volatile("@ __cmpxchg1\n"
+ " ldrexb %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexbeq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+ case 2:
+ do {
+ asm volatile("@ __cmpxchg1\n"
+ " ldrexh %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexheq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+#endif /* CONFIG_CPU_32v6K */
+ case 4:
+ do {
+ asm volatile("@ __cmpxchg4\n"
+ " ldrex %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexeq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+ default:
+ __bad_cmpxchg(ptr, size);
+ oldval = 0;
+ }
+
+ return oldval;
+}
+
+static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long ret;
+
+ smp_mb();
+ ret = __cmpxchg(ptr, old, new, size);
+ smp_mb();
+
+ return ret;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+ unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long ret;
+
+ switch (size) {
+#ifndef CONFIG_CPU_32v6K
+ case 1:
+ case 2:
+ ret = __cmpxchg_local_generic(ptr, old, new, size);
+ break;
+#endif /* !CONFIG_CPU_32v6K */
+ default:
+ ret = __cmpxchg(ptr, old, new, size);
+ }
+
+ return ret;
+}
+
+#define cmpxchg_local(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+
+#ifdef CONFIG_CPU_32v6K
+
+/*
+ * Note : ARMv7-M (currently unsupported by Linux) does not support
+ * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
+ * not be allowed to use __cmpxchg64.
+ */
+static inline unsigned long long __cmpxchg64(volatile void *ptr,
+ unsigned long long old,
+ unsigned long long new)
+{
+ register unsigned long long oldval asm("r0");
+ register unsigned long long __old asm("r2") = old;
+ register unsigned long long __new asm("r4") = new;
+ unsigned long res;
+
+ do {
+ asm volatile(
+ " @ __cmpxchg8\n"
+ " ldrexd %1, %H1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " teqeq %H1, %H3\n"
+ " strexdeq %0, %4, %H4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (__old), "r" (__new)
+ : "memory", "cc");
+ } while (res);
+
+ return oldval;
+}
+
+static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
+ unsigned long long old,
+ unsigned long long new)
+{
+ unsigned long long ret;
+
+ smp_mb();
+ ret = __cmpxchg64(ptr, old, new);
+ smp_mb();
+
+ return ret;
+}
+
+#define cmpxchg64(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
+
+#define cmpxchg64_local(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg64((ptr), \
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
+
+#else /* !CONFIG_CPU_32v6K */
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif /* CONFIG_CPU_32v6K */
+
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)
#define TLB_V6_I_ASID (1 << 18)
#define TLB_BTB (1 << 28)
+
+/* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */
+#define TLB_V7_UIS_PAGE (1 << 19)
+#define TLB_V7_UIS_FULL (1 << 20)
+#define TLB_V7_UIS_ASID (1 << 21)
+
#define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */
#define TLB_DCLEAN (1 << 30)
#define TLB_WB (1 << 31)
# define v6wbi_always_flags (-1UL)
#endif
+#ifdef CONFIG_SMP
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
+#else
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+ TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
+#endif
+
#ifdef CONFIG_CPU_TLB_V7
-# define v7wbi_possible_flags v6wbi_tlb_flags
-# define v7wbi_always_flags v6wbi_tlb_flags
+# define v7wbi_possible_flags v7wbi_tlb_flags
+# define v7wbi_always_flags v7wbi_tlb_flags
# ifdef _TLB
# define MULTI_TLB 1
# else
asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+ if (tlb_flag(TLB_V7_UIS_FULL))
+ asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
if (tlb_flag(TLB_V6_I_ASID))
asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+ if (tlb_flag(TLB_V7_UIS_ASID))
+ asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc");
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+ if (tlb_flag(TLB_V7_UIS_PAGE))
+ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc");
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (kaddr) : "cc");
if (tlb_flag(TLB_V6_I_PAGE))
asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
+ if (tlb_flag(TLB_V7_UIS_PAGE))
+ asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc");
if (tlb_flag(TLB_BTB)) {
/* flush the branch target cache */
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o isa.o
obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_HAVE_ARM_SCU) += smp_scu.o
+obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o
obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o
obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o
obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+ /*
+ * If we have support for OABI programs, we can never allow NX
+ * support - our signal syscall restart mechanism relies upon
+ * being able to execute code placed on the user stack.
+ */
+ return 1;
+#else
return 0;
+#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);
subeq r4, r2, #4 @ ARM instr at LR - 4
subne r4, r2, #2 @ Thumb instr at LR - 2
1: ldreqt r0, [r4]
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ reveq r0, r0 @ little endian instruction
+#endif
beq call_fpe
@ Thumb instruction
#if __LINUX_ARM_ARCH__ >= 7
*/
__kuser_memory_barrier: @ 0xffff0fa0
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
- mcr p15, 0, r0, c7, c10, 5 @ dmb
-#endif
+ smp_dmb
usr_ret lr
.align 5
A710( teq ip, #0x0f000000 )
A710( bne .Larm710bug )
#endif
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ rev r10, r10 @ little endian instruction
+#endif
#elif defined(CONFIG_AEABI)
regs.ARM_r2 = (unsigned long)fn;
regs.ARM_r3 = (unsigned long)do_exit;
regs.ARM_pc = (unsigned long)kernel_thread_helper;
- regs.ARM_cpsr = SVC_MODE;
+ regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE;
return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL);
}
*/
thumb = handler & 1;
- if (thumb)
+ if (thumb) {
cpsr |= PSR_T_BIT;
- else
+#if __LINUX_ARM_ARCH__ >= 7
+ /* clear the If-Then Thumb-2 execution state */
+ cpsr &= ~PSR_IT_MASK;
+#endif
+ } else
cpsr &= ~PSR_T_BIT;
}
#endif
#include <linux/smp.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/clockchips.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
#include <asm/cpu.h>
+#include <asm/cputype.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
+#include <asm/localtimer.h>
/*
* as from 2.5, kernels no longer have an init_tasks structure
* Take this CPU offline. Once we clear this, we can't return,
* and we must not schedule until we're ready to give up the cpu.
*/
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
/*
* OK - migrate IRQs away from this CPU
local_fiq_enable();
/*
- * Setup local timer for this CPU.
+ * Setup the percpu timer for this CPU.
*/
- local_timer_setup();
+ percpu_timer_setup();
calibrate_delay();
/*
* OK, now it's safe to let the boot CPU continue
*/
- cpu_set(cpu, cpu_online_map);
+ set_cpu_online(cpu, true);
/*
* OK, it's off to the idle thread for us
seq_putc(p, '\n');
}
+/*
+ * Timer (local or broadcast) support
+ */
+static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
+
static void ipi_timer(void)
{
+ struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
irq_enter();
- local_timer_interrupt();
+ evt->event_handler(evt);
irq_exit();
}
}
#endif
+#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
+static void smp_timer_broadcast(const struct cpumask *mask)
+{
+ send_ipi_message(mask, IPI_TIMER);
+}
+
+static void broadcast_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+}
+
+static void local_timer_setup(struct clock_event_device *evt)
+{
+ evt->name = "dummy_timer";
+ evt->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_DUMMY;
+ evt->rating = 400;
+ evt->mult = 1;
+ evt->set_mode = broadcast_timer_set_mode;
+ evt->broadcast = smp_timer_broadcast;
+
+ clockevents_register_device(evt);
+}
+#endif
+
+void __cpuinit percpu_timer_setup(void)
+{
+ unsigned int cpu = smp_processor_id();
+ struct clock_event_device *evt = &per_cpu(percpu_clockevent, cpu);
+
+ evt->cpumask = cpumask_of(cpu);
+
+ local_timer_setup(evt);
+}
+
static DEFINE_SPINLOCK(stop_lock);
/*
dump_stack();
spin_unlock(&stop_lock);
- cpu_clear(cpu, cpu_online_map);
+ set_cpu_online(cpu, false);
local_fiq_disable();
local_irq_disable();
send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
}
-void smp_timer_broadcast(const struct cpumask *mask)
-{
- send_ipi_message(mask, IPI_TIMER);
-}
-
void smp_send_stop(void)
{
cpumask_t mask = cpu_online_map;
unsigned long ta_end;
};
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+ return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
static inline void ipi_flush_tlb_all(void *ignored)
{
local_flush_tlb_all();
void flush_tlb_all(void)
{
- on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+ if (tlb_ops_need_broadcast())
+ on_each_cpu(ipi_flush_tlb_all, NULL, 1);
+ else
+ local_flush_tlb_all();
}
void flush_tlb_mm(struct mm_struct *mm)
{
- on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+ if (tlb_ops_need_broadcast())
+ on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
+ else
+ local_flush_tlb_mm(mm);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
{
- struct tlb_args ta;
-
- ta.ta_vma = vma;
- ta.ta_start = uaddr;
-
- on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ if (tlb_ops_need_broadcast()) {
+ struct tlb_args ta;
+ ta.ta_vma = vma;
+ ta.ta_start = uaddr;
+ on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ } else
+ local_flush_tlb_page(vma, uaddr);
}
void flush_tlb_kernel_page(unsigned long kaddr)
{
- struct tlb_args ta;
-
- ta.ta_start = kaddr;
-
- on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+ if (tlb_ops_need_broadcast()) {
+ struct tlb_args ta;
+ ta.ta_start = kaddr;
+ on_each_cpu(ipi_flush_tlb_kernel_page, &ta, 1);
+ } else
+ local_flush_tlb_kernel_page(kaddr);
}
void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- struct tlb_args ta;
-
- ta.ta_vma = vma;
- ta.ta_start = start;
- ta.ta_end = end;
-
- on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ if (tlb_ops_need_broadcast()) {
+ struct tlb_args ta;
+ ta.ta_vma = vma;
+ ta.ta_start = start;
+ ta.ta_end = end;
+ on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
+ } else
+ local_flush_tlb_range(vma, start, end);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- struct tlb_args ta;
-
- ta.ta_start = start;
- ta.ta_end = end;
-
- on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+ if (tlb_ops_need_broadcast()) {
+ struct tlb_args ta;
+ ta.ta_start = start;
+ ta.ta_end = end;
+ on_each_cpu(ipi_flush_tlb_kernel_range, &ta, 1);
+ } else
+ local_flush_tlb_kernel_range(start, end);
}
--- /dev/null
+/*
+ * linux/arch/arm/kernel/smp_scu.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+
+#include <asm/smp_scu.h>
+#include <asm/cacheflush.h>
+
+#define SCU_CTRL 0x00
+#define SCU_CONFIG 0x04
+#define SCU_CPU_STATUS 0x08
+#define SCU_INVALIDATE 0x0c
+#define SCU_FPGA_REVISION 0x10
+
+/*
+ * Get the number of CPU cores from the SCU configuration
+ */
+unsigned int __init scu_get_core_count(void __iomem *scu_base)
+{
+ unsigned int ncores = __raw_readl(scu_base + SCU_CONFIG);
+ return (ncores & 0x03) + 1;
+}
+
+/*
+ * Enable the SCU
+ */
+void __init scu_enable(void __iomem *scu_base)
+{
+ u32 scu_ctrl;
+
+ scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
+ scu_ctrl |= 1;
+ __raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+
+ /*
+ * Ensure that the data accessed by CPU0 before the SCU was
+ * initialised is visible to the other CPUs.
+ */
+ flush_cache_all();
+}
--- /dev/null
+/*
+ * linux/arch/arm/kernel/smp_twd.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/jiffies.h>
+#include <linux/clockchips.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <asm/smp_twd.h>
+#include <asm/hardware/gic.h>
+
+#define TWD_TIMER_LOAD 0x00
+#define TWD_TIMER_COUNTER 0x04
+#define TWD_TIMER_CONTROL 0x08
+#define TWD_TIMER_INTSTAT 0x0C
+
+#define TWD_WDOG_LOAD 0x20
+#define TWD_WDOG_COUNTER 0x24
+#define TWD_WDOG_CONTROL 0x28
+#define TWD_WDOG_INTSTAT 0x2C
+#define TWD_WDOG_RESETSTAT 0x30
+#define TWD_WDOG_DISABLE 0x34
+
+#define TWD_TIMER_CONTROL_ENABLE (1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT (0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC (1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE (1 << 2)
+
+/* set up by the platform code */
+void __iomem *twd_base;
+
+static unsigned long twd_timer_rate;
+
+static void twd_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *clk)
+{
+ unsigned long ctrl;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ /* timer load already set up */
+ ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
+ | TWD_TIMER_CONTROL_PERIODIC;
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* period set, and timer enabled in 'next_event' hook */
+ ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ default:
+ ctrl = 0;
+ }
+
+ __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+}
+
+static int twd_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
+
+ ctrl |= TWD_TIMER_CONTROL_ENABLE;
+
+ __raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
+ __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
+
+ return 0;
+}
+
+/*
+ * local_timer_ack: checks for a local timer interrupt.
+ *
+ * If a local timer interrupt has occurred, acknowledge and return 1.
+ * Otherwise, return 0.
+ */
+int twd_timer_ack(void)
+{
+ if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
+ __raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void __cpuinit twd_calibrate_rate(void)
+{
+ unsigned long load, count;
+ u64 waitjiffies;
+
+ /*
+ * If this is the first time round, we need to work out how fast
+ * the timer ticks
+ */
+ if (twd_timer_rate == 0) {
+ printk(KERN_INFO "Calibrating local timer... ");
+
+ /* Wait for a tick to start */
+ waitjiffies = get_jiffies_64() + 1;
+
+ while (get_jiffies_64() < waitjiffies)
+ udelay(10);
+
+ /* OK, now the tick has started, let's get the timer going */
+ waitjiffies += 5;
+
+ /* enable, no interrupt or reload */
+ __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
+
+ /* maximum value */
+ __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
+
+ while (get_jiffies_64() < waitjiffies)
+ udelay(10);
+
+ count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
+
+ twd_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
+
+ printk("%lu.%02luMHz.\n", twd_timer_rate / 1000000,
+ (twd_timer_rate / 100000) % 100);
+ }
+
+ load = twd_timer_rate / HZ;
+
+ __raw_writel(load, twd_base + TWD_TIMER_LOAD);
+}
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit twd_timer_setup(struct clock_event_device *clk)
+{
+ unsigned long flags;
+
+ twd_calibrate_rate();
+
+ clk->name = "local_timer";
+ clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
+ clk->rating = 350;
+ clk->set_mode = twd_set_mode;
+ clk->set_next_event = twd_set_next_event;
+ clk->shift = 20;
+ clk->mult = div_sc(twd_timer_rate, NSEC_PER_SEC, clk->shift);
+ clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
+ clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
+
+ /* Make sure our local interrupt controller has this enabled */
+ local_irq_save(flags);
+ get_irq_chip(clk->irq)->unmask(clk->irq);
+ local_irq_restore(flags);
+
+ clockevents_register_device(clk);
+}
+
+/*
+ * take a local timer down
+ */
+void __cpuexit twd_timer_stop(void)
+{
+ __raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+}
.data : AT(__data_loc) {
_data = .; /* address in memory */
+ _sdata = .;
/*
* first, the init task union, aligned
__bss_start = .; /* BSS */
*(.bss)
*(COMMON)
+ __bss_stop = .;
_end = .;
}
/* Stabs debugging sections. */
mov r2, #1
add r1, r1, r0, lsr #3 @ Get byte offset
mov r3, r2, lsl r3 @ create mask
+ smp_dmb
1: ldrexb r2, [r1]
ands r0, r2, r3 @ save old value of bit
\instr r2, r2, r3 @ toggle bit
strexb ip, r2, [r1]
cmp ip, #0
bne 1b
+ smp_dmb
cmp r0, #0
movne r0, #1
2: mov pc, lr
* MCI (SD/MMC)
*/
static struct at91_mmc_data __initdata afeb9260_mmc_data = {
+ .det_pin = AT91_PIN_PC9,
+ .wp_pin = AT91_PIN_PC4,
.slot_b = 1,
.wire4 = 1,
};
static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
{
+ I2C_BOARD_INFO("tlv320aic23", 0x1a),
+ }, {
I2C_BOARD_INFO("fm3130", 0x68),
}, {
I2C_BOARD_INFO("24c64", 0x50),
/* I2C */
at91_add_device_i2c(afeb9260_i2c_devices,
ARRAY_SIZE(afeb9260_i2c_devices));
+ /* Audio */
+ at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
}
MACHINE_START(AFEB9260, "Custom afeb9260 board")
}
};
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("24c512", 0x50),
+ },
+};
+
+
static void __init ek_board_init(void)
{
/* Serial */
/* MMC */
at91_add_device_mmc(0, &ek_mmc_data);
/* I2C */
- at91_add_device_i2c(NULL, 0);
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
/* LEDs */
at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
/* PCK0 provides MCLK to the WM8731 */
#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
+/*
+ * Chips have some kind of clocks : group them by functionality
+ */
+#define cpu_has_utmi() ( cpu_is_at91cap9() \
+ || cpu_is_at91sam9rl())
+
+#define cpu_has_800M_plla() (cpu_is_at91sam9g20())
+
+#define cpu_has_pllb() (!cpu_is_at91sam9rl())
+
+#define cpu_has_upll() (0)
+
+/* USB host HS & FS */
+#define cpu_has_uhp() (!cpu_is_at91sam9rl())
+
+/* USB device FS only */
+#define cpu_has_udpfs() (!cpu_is_at91sam9rl())
+
+
static LIST_HEAD(clocks);
static DEFINE_SPINLOCK(clk_lock);
};
static struct clk uhpck = {
.name = "uhpck",
- .parent = &pllb,
+ /*.parent = ... we choose parent at runtime */
.mode = pmc_sys_mode,
};
case AT91_PMC_CSS_PLLA:
return &plla;
case AT91_PMC_CSS_PLLB:
- return &pllb;
+ if (cpu_has_upll())
+ /* CSS_PLLB == CSS_UPLL */
+ return &utmi_clk;
+ else if (cpu_has_pllb())
+ return &pllb;
}
return NULL;
u32 pckr;
pckr = at91_sys_read(AT91_PMC_PCKR(clk->id));
- pckr &= AT91_PMC_CSS_PLLB; /* clock selection */
+ pckr &= AT91_PMC_CSS; /* clock selection */
pckr |= prescale << 2;
at91_sys_write(AT91_PMC_PCKR(clk->id), pckr);
clk->rate_hz = actual;
}
EXPORT_SYMBOL(clk_set_parent);
-/* establish PCK0..PCK3 parentage and rate */
+/* establish PCK0..PCKN parentage and rate */
static void __init init_programmable_clock(struct clk *clk)
{
struct clk *parent;
seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR));
seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR));
seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR));
- if (!cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
seq_printf(s, "PLLB = %8x\n", at91_sys_read(AT91_CKGR_PLLBR));
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_utmi())
seq_printf(s, "UCKR = %8x\n", uckr = at91_sys_read(AT91_CKGR_UCKR));
seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR));
+ if (cpu_has_upll())
+ seq_printf(s, "USB = %8x\n", at91_sys_read(AT91_PMC_USB));
seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR));
seq_printf(s, "\n");
&clk32k,
&main_clk,
&plla,
- &pllb,
-
- /* PLLB children (USB) */
- &udpck,
- &uhpck,
/* MCK */
&mck
};
+/* PLLB generated USB full speed clock init */
+static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 48 MHz PLLB value,
+ * disable 48MHz clock during usb peripheral suspend.
+ *
+ * REVISIT: assumes MCK doesn't derive from PLLB!
+ */
+ uhpck.parent = &pllb;
+
+ at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
+ pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
+ if (cpu_is_at91rm9200()) {
+ uhpck.pmc_mask = AT91RM9200_PMC_UHP;
+ udpck.pmc_mask = AT91RM9200_PMC_UDP;
+ at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
+ } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ udpck.pmc_mask = AT91SAM926x_PMC_UDP;
+ } else if (cpu_is_at91cap9()) {
+ uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+ }
+ at91_sys_write(AT91_CKGR_PLLBR, 0);
+
+ udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+ uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
+}
+
+/* UPLL generated USB full speed clock init */
+static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
+{
+ /*
+ * USB clock init: choose 480 MHz from UPLL,
+ */
+ unsigned int usbr = AT91_PMC_USBS_UPLL;
+
+ /* Setup divider by 10 to reach 48 MHz */
+ usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
+
+ at91_sys_write(AT91_PMC_USB, usbr);
+
+ /* Now set uhpck values */
+ uhpck.parent = &utmi_clk;
+ uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
+ uhpck.rate_hz = utmi_clk.parent->rate_hz;
+ uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
+}
+
int __init at91_clock_init(unsigned long main_clock)
{
unsigned tmp, freq, mckr;
/* report if PLLA is more than mildly overclocked */
plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_sys_read(AT91_CKGR_PLLAR));
- if ((!cpu_is_at91sam9g20() && plla.rate_hz > 209000000)
- || (cpu_is_at91sam9g20() && plla.rate_hz > 800000000))
+ if ((!cpu_has_800M_plla() && plla.rate_hz > 209000000)
+ || (cpu_has_800M_plla() && plla.rate_hz > 800000000))
pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
- /*
- * USB clock init: choose 48 MHz PLLB value,
- * disable 48MHz clock during usb peripheral suspend.
- *
- * REVISIT: assumes MCK doesn't derive from PLLB!
- */
- at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2) | AT91_PMC_USB96M;
- pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
- if (cpu_is_at91rm9200()) {
- uhpck.pmc_mask = AT91RM9200_PMC_UHP;
- udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20()) {
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- } else if (cpu_is_at91cap9()) {
- uhpck.pmc_mask = AT91CAP9_PMC_UHP;
+
+ if (cpu_has_upll() && !cpu_has_pllb()) {
+ /* setup UTMI clock as the fourth primary clock
+ * (instead of pllb) */
+ utmi_clk.type |= CLK_TYPE_PRIMARY;
+ utmi_clk.id = 3;
}
- at91_sys_write(AT91_CKGR_PLLBR, 0);
- udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
- uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init);
/*
* USB HS clock init
*/
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl()) {
+ if (cpu_has_utmi())
/*
* multiplier is hard-wired to 40
* (obtain the USB High Speed 480 MHz when input is 12 MHz)
*/
utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
- }
+
+ /*
+ * USB FS clock init
+ */
+ if (cpu_has_pllb())
+ at91_pllb_usbfs_clock_init(main_clock);
+ if (cpu_has_upll())
+ /* assumes that we choose UPLL for USB and not PLLA */
+ at91_upll_usbfs_clock_init(main_clock);
/*
* MCK and CPU derive from one of those primary clocks.
mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
freq = mck.parent->rate_hz;
freq /= (1 << ((mckr & AT91_PMC_PRES) >> 2)); /* prescale */
- if (cpu_is_at91rm9200())
+ if (cpu_is_at91rm9200()) {
mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
- else if (cpu_is_at91sam9g20()) {
+ } else if (cpu_is_at91sam9g20()) {
mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
if (mckr & AT91_PMC_PDIV)
freq /= 2; /* processor clock division */
- } else
+ } else {
mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
+ }
/* Register the PMC's standard clocks */
for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
list_add_tail(&standard_pmc_clocks[i]->node, &clocks);
- if (cpu_is_at91cap9() || cpu_is_at91sam9rl())
+ if (cpu_has_pllb())
+ list_add_tail(&pllb.node, &clocks);
+
+ if (cpu_has_uhp())
+ list_add_tail(&uhpck.node, &clocks);
+
+ if (cpu_has_udpfs())
+ list_add_tail(&udpck.node, &clocks);
+
+ if (cpu_has_utmi())
list_add_tail(&utmi_clk.node, &clocks);
/* MCK and CPU clock are "always on" */
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [AT91CAP9 revC only] */
+#define AT91CAP9_PMC_DDR (1 << 2) /* DDR Clock [CAP9 revC & some SAM9 only] */
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
#define AT91CAP9_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91CAP9 only] */
#define AT91_PMC_PCDR (AT91_PMC + 0x14) /* Peripheral Clock Disable Register */
#define AT91_PMC_PCSR (AT91_PMC + 0x18) /* Peripheral Clock Status Register */
-#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [SAM9RL, CAP9] */
+#define AT91_CKGR_UCKR (AT91_PMC + 0x1C) /* UTMI Clock Register [some SAM9, CAP9] */
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
-#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
+#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI BIAS Start-up Time */
#define AT91_CKGR_MOR (AT91_PMC + 0x20) /* Main Oscillator Register [not on SAM9RL] */
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
#define AT91_PMC_CSS_MAIN (1 << 0)
#define AT91_PMC_CSS_PLLA (2 << 0)
#define AT91_PMC_CSS_PLLB (3 << 0)
+#define AT91_PMC_CSS_UPLL (3 << 0) /* [some SAM9 only] */
#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
#define AT91_PMC_PRES_1 (0 << 2)
#define AT91_PMC_PRES_2 (1 << 2)
#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9,CAP9 only] */
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
-#define AT91SAM9_PMC_MDIV_6 (3 << 8)
+#define AT91SAM9_PMC_MDIV_6 (3 << 8) /* [some SAM9 only] */
+#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */
#define AT91_PMC_PDIV_1 (0 << 12)
#define AT91_PMC_PDIV_2 (1 << 12)
+#define AT91_PMC_PLLADIV2 (1 << 12) /* PLLA divisor by 2 [some SAM9 only] */
+#define AT91_PMC_PLLADIV2_OFF (0 << 12)
+#define AT91_PMC_PLLADIV2_ON (1 << 12)
-#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-3 Registers */
+#define AT91_PMC_USB (AT91_PMC + 0x38) /* USB Clock Register [some SAM9 only] */
+#define AT91_PMC_USBS (0x1 << 0) /* USB OHCI Input clock selection */
+#define AT91_PMC_USBS_PLLA (0 << 0)
+#define AT91_PMC_USBS_UPLL (1 << 0)
+#define AT91_PMC_OHCIUSBDIV (0xF << 8) /* Divider for USB OHCI Clock */
+
+#define AT91_PMC_PCKR(n) (AT91_PMC + 0x40 + ((n) * 4)) /* Programmable Clock 0-N Registers */
+#define AT91_PMC_CSSMCK (0x1 << 8) /* CSS or Master Clock Selection */
+#define AT91_PMC_CSSMCK_CSS (0 << 8)
+#define AT91_PMC_CSSMCK_MCK (1 << 8)
#define AT91_PMC_IER (AT91_PMC + 0x60) /* Interrupt Enable Register */
#define AT91_PMC_IDR (AT91_PMC + 0x64) /* Interrupt Disable Register */
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
-#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [AT91CAP9 only] */
+#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock [some SAM9, AT91CAP9 only] */
#define AT91_PMC_OSCSEL (1 << 7) /* Slow Clock Oscillator [AT91CAP9 revC only] */
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
if ARCH_DAVINCI
+config AINTC
+ bool
+
+config CP_INTC
+ bool
+
menu "TI DaVinci Implementations"
comment "DaVinci Core Type"
config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
+ select AINTC
+
+config ARCH_DAVINCI_DM355
+ bool "DaVinci 355 based system"
+ select AINTC
+
+config ARCH_DAVINCI_DM646x
+ bool "DaVinci 646x based system"
+ select AINTC
comment "DaVinci Board Type"
Configure this option to specify the whether the board used
for development is a DM644x EVM
+config MACH_SFFSDR
+ bool "Lyrtech SFFSDR"
+ depends on ARCH_DAVINCI_DM644x
+ help
+ Say Y here to select the Lyrtech Small Form Factor
+ Software Defined Radio (SFFSDR) board.
+
+config MACH_DAVINCI_DM355_EVM
+ bool "TI DM355 EVM"
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 EVM
+
+config MACH_DM355_LEOPARD
+ bool "DM355 Leopard board"
+ depends on ARCH_DAVINCI_DM355
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM355 Leopard board.
+
+config MACH_DAVINCI_DM6467_EVM
+ bool "TI DM6467 EVM"
+ depends on ARCH_DAVINCI_DM646x
+ help
+ Configure this option to specify the whether the board used
+ for development is a DM6467 EVM
+
config DAVINCI_MUX
bool "DAVINCI multiplexing support"
#
# Common objects
-obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
- gpio.o devices.o dma.o usb.o
+obj-y := time.o clock.o serial.o io.o psc.o \
+ gpio.o devices.o dma.o usb.o common.o sram.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
# Chip specific
obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
+obj-$(CONFIG_ARCH_DAVINCI_DM355) += dm355.o
+obj-$(CONFIG_ARCH_DAVINCI_DM646x) += dm646x.o
+
+obj-$(CONFIG_AINTC) += irq.o
+obj-$(CONFIG_CP_INTC) += cp_intc.o
# Board specific
obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
+obj-$(CONFIG_MACH_SFFSDR) += board-sffsdr.o
+obj-$(CONFIG_MACH_DAVINCI_DM355_EVM) += board-dm355-evm.o
+obj-$(CONFIG_MACH_DM355_LEOPARD) += board-dm355-leopard.o
+obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM) += board-dm646x-evm.o
--- /dev/null
+/*
+ * TI DaVinci EVM board support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+/* NOTE: this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+ {
+ /* UBL (a few copies) plus U-Boot */
+ .name = "bootloader",
+ .offset = 0,
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ /* U-Boot environment */
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * NAND_BLOCK_SIZE,
+ .mask_flags = 0,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+ .mask_chipsel = BIT(14),
+ .parts = davinci_nand_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
+ .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_nand_device = {
+ .name = "davinci_nand",
+ .id = 0,
+
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 400 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static int dm355evm_mmc_gpios = -EINVAL;
+
+static void dm355evm_mmcsd_gpios(unsigned gpio)
+{
+ gpio_request(gpio + 0, "mmc0_ro");
+ gpio_request(gpio + 1, "mmc0_cd");
+ gpio_request(gpio + 2, "mmc1_ro");
+ gpio_request(gpio + 3, "mmc1_cd");
+
+ /* we "know" these are input-only so we don't
+ * need to call gpio_direction_input()
+ */
+
+ dm355evm_mmc_gpios = gpio;
+}
+
+static struct i2c_board_info dm355evm_i2c_info[] = {
+ { I2C_BOARD_INFO("dm355evm_msp", 0x25),
+ .platform_data = dm355evm_mmcsd_gpios,
+ /* plus irq */ },
+ /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+ /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+
+ gpio_request(5, "dm355evm_msp");
+ gpio_direction_input(5);
+ dm355evm_i2c_info[0].irq = gpio_to_irq(5);
+
+ i2c_register_board_info(1, dm355evm_i2c_info,
+ ARRAY_SIZE(dm355evm_i2c_info));
+}
+
+static struct resource dm355evm_dm9000_rsrc[] = {
+ {
+ /* addr */
+ .start = 0x04014000,
+ .end = 0x04014001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /* data */
+ .start = 0x04014002,
+ .end = 0x04014003,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ
+ | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+ },
+};
+
+static struct platform_device dm355evm_dm9000 = {
+ .name = "dm9000",
+ .id = -1,
+ .resource = dm355evm_dm9000_rsrc,
+ .num_resources = ARRAY_SIZE(dm355evm_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_evm_devices[] __initdata = {
+ &dm355evm_dm9000,
+ &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_evm_map_io(void)
+{
+ dm355_init();
+}
+
+static int dm355evm_mmc_get_cd(int module)
+{
+ if (!gpio_is_valid(dm355evm_mmc_gpios))
+ return -ENXIO;
+ /* low == card present */
+ return !gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 1);
+}
+
+static int dm355evm_mmc_get_ro(int module)
+{
+ if (!gpio_is_valid(dm355evm_mmc_gpios))
+ return -ENXIO;
+ /* high == card's write protect switch active */
+ return gpio_get_value_cansleep(dm355evm_mmc_gpios + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355evm_mmc_config = {
+ .get_cd = dm355evm_mmc_get_cd,
+ .get_ro = dm355evm_mmc_get_ro,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+ .version = MMC_CTLR_VERSION_1,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender. If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE 0 /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE 1 /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+ .byte_len = SZ_64K / 8,
+ .name = "at25640a",
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_evm_spi_info[] __initconst = {
+ {
+ .modalias = "at25",
+ .platform_data = &at25640a,
+ .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static __init void dm355_evm_init(void)
+{
+ struct clk *aemif;
+
+ gpio_request(1, "dm9000");
+ gpio_direction_input(1);
+ dm355evm_dm9000_rsrc[2].start = gpio_to_irq(1);
+
+ aemif = clk_get(&dm355evm_dm9000.dev, "aemif");
+ if (IS_ERR(aemif))
+ WARN("%s: unable to get AEMIF clock\n", __func__);
+ else
+ clk_enable(aemif);
+
+ platform_add_devices(davinci_evm_devices,
+ ARRAY_SIZE(davinci_evm_devices));
+ evm_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ /* NOTE: NAND flash timings set by the UBL are slower than
+ * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+ * but could be 0x0400008c for about 25% faster page reads.
+ */
+
+ gpio_request(2, "usb_id_toggle");
+ gpio_direction_output(2, USB_ID_VALUE);
+ /* irlml6401 switches over 1A in under 8 msec */
+ setup_usb(500, 8);
+
+ davinci_setup_mmc(0, &dm355evm_mmc_config);
+ davinci_setup_mmc(1, &dm355evm_mmc_config);
+
+ dm355_init_spi0(BIT(0), dm355_evm_spi_info,
+ ARRAY_SIZE(dm355_evm_spi_info));
+}
+
+static __init void dm355_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = dm355_evm_map_io,
+ .init_irq = dm355_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = dm355_evm_init,
+MACHINE_END
--- /dev/null
+/*
+ * DM355 leopard board support
+ *
+ * Based on board-dm355-evm.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/eeprom.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/hardware.h>
+#include <mach/dm355.h>
+#include <mach/psc.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/common.h>
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e10000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+/* NOTE: this is geared for the standard config, with a socketed
+ * 2 GByte Micron NAND (MT29F16G08FAA) using 128KB sectors. If you
+ * swap chips, maybe with a different block size, partitioning may
+ * need to be changed.
+ */
+#define NAND_BLOCK_SIZE SZ_128K
+
+static struct mtd_partition davinci_nand_partitions[] = {
+ {
+ /* UBL (a few copies) plus U-Boot */
+ .name = "bootloader",
+ .offset = 0,
+ .size = 15 * NAND_BLOCK_SIZE,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ }, {
+ /* U-Boot environment */
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 1 * NAND_BLOCK_SIZE,
+ .mask_flags = 0,
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_512M,
+ .mask_flags = 0,
+ }, {
+ .name = "filesystem2",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* two blocks with bad block table (and mirror) at the end */
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+ .mask_chipsel = BIT(14),
+ .parts = davinci_nand_partitions,
+ .nr_parts = ARRAY_SIZE(davinci_nand_partitions),
+ .ecc_mode = NAND_ECC_HW_SYNDROME,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_nand_resources[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_nand_device = {
+ .name = "davinci_nand",
+ .id = 0,
+
+ .num_resources = ARRAY_SIZE(davinci_nand_resources),
+ .resource = davinci_nand_resources,
+
+ .dev = {
+ .platform_data = &davinci_nand_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 400 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static int leopard_mmc_gpio = -EINVAL;
+
+static void dm355leopard_mmcsd_gpios(unsigned gpio)
+{
+ gpio_request(gpio + 0, "mmc0_ro");
+ gpio_request(gpio + 1, "mmc0_cd");
+ gpio_request(gpio + 2, "mmc1_ro");
+ gpio_request(gpio + 3, "mmc1_cd");
+
+ /* we "know" these are input-only so we don't
+ * need to call gpio_direction_input()
+ */
+
+ leopard_mmc_gpio = gpio;
+}
+
+static struct i2c_board_info dm355leopard_i2c_info[] = {
+ { I2C_BOARD_INFO("dm355leopard_msp", 0x25),
+ .platform_data = dm355leopard_mmcsd_gpios,
+ /* plus irq */ },
+ /* { I2C_BOARD_INFO("tlv320aic3x", 0x1b), }, */
+ /* { I2C_BOARD_INFO("tvp5146", 0x5d), }, */
+};
+
+static void __init leopard_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+
+ gpio_request(5, "dm355leopard_msp");
+ gpio_direction_input(5);
+ dm355leopard_i2c_info[0].irq = gpio_to_irq(5);
+
+ i2c_register_board_info(1, dm355leopard_i2c_info,
+ ARRAY_SIZE(dm355leopard_i2c_info));
+}
+
+static struct resource dm355leopard_dm9000_rsrc[] = {
+ {
+ /* addr */
+ .start = 0x04000000,
+ .end = 0x04000001,
+ .flags = IORESOURCE_MEM,
+ }, {
+ /* data */
+ .start = 0x04000016,
+ .end = 0x04000017,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .flags = IORESOURCE_IRQ
+ | IORESOURCE_IRQ_HIGHEDGE /* rising (active high) */,
+ },
+};
+
+static struct platform_device dm355leopard_dm9000 = {
+ .name = "dm9000",
+ .id = -1,
+ .resource = dm355leopard_dm9000_rsrc,
+ .num_resources = ARRAY_SIZE(dm355leopard_dm9000_rsrc),
+};
+
+static struct platform_device *davinci_leopard_devices[] __initdata = {
+ &dm355leopard_dm9000,
+ &davinci_nand_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init dm355_leopard_map_io(void)
+{
+ dm355_init();
+}
+
+static int dm355leopard_mmc_get_cd(int module)
+{
+ if (!gpio_is_valid(leopard_mmc_gpio))
+ return -ENXIO;
+ /* low == card present */
+ return !gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 1);
+}
+
+static int dm355leopard_mmc_get_ro(int module)
+{
+ if (!gpio_is_valid(leopard_mmc_gpio))
+ return -ENXIO;
+ /* high == card's write protect switch active */
+ return gpio_get_value_cansleep(leopard_mmc_gpio + 2 * module + 0);
+}
+
+static struct davinci_mmc_config dm355leopard_mmc_config = {
+ .get_cd = dm355leopard_mmc_get_cd,
+ .get_ro = dm355leopard_mmc_get_ro,
+ .wires = 4,
+ .max_freq = 50000000,
+ .caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+};
+
+/* Don't connect anything to J10 unless you're only using USB host
+ * mode *and* have to do so with some kind of gender-bender. If
+ * you have proper Mini-B or Mini-A cables (or Mini-A adapters)
+ * the ID pin won't need any help.
+ */
+#ifdef CONFIG_USB_MUSB_PERIPHERAL
+#define USB_ID_VALUE 0 /* ID pulled high; *should* float */
+#else
+#define USB_ID_VALUE 1 /* ID pulled low */
+#endif
+
+static struct spi_eeprom at25640a = {
+ .byte_len = SZ_64K / 8,
+ .name = "at25640a",
+ .page_size = 32,
+ .flags = EE_ADDR2,
+};
+
+static struct spi_board_info dm355_leopard_spi_info[] __initconst = {
+ {
+ .modalias = "at25",
+ .platform_data = &at25640a,
+ .max_speed_hz = 10 * 1000 * 1000, /* at 3v3 */
+ .bus_num = 0,
+ .chip_select = 0,
+ .mode = SPI_MODE_0,
+ },
+};
+
+static __init void dm355_leopard_init(void)
+{
+ struct clk *aemif;
+
+ gpio_request(9, "dm9000");
+ gpio_direction_input(9);
+ dm355leopard_dm9000_rsrc[2].start = gpio_to_irq(9);
+
+ aemif = clk_get(&dm355leopard_dm9000.dev, "aemif");
+ if (IS_ERR(aemif))
+ WARN("%s: unable to get AEMIF clock\n", __func__);
+ else
+ clk_enable(aemif);
+
+ platform_add_devices(davinci_leopard_devices,
+ ARRAY_SIZE(davinci_leopard_devices));
+ leopard_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ /* NOTE: NAND flash timings set by the UBL are slower than
+ * needed by MT29F16G08FAA chips ... EMIF.A1CR is 0x40400204
+ * but could be 0x0400008c for about 25% faster page reads.
+ */
+
+ gpio_request(2, "usb_id_toggle");
+ gpio_direction_output(2, USB_ID_VALUE);
+ /* irlml6401 switches over 1A in under 8 msec */
+ setup_usb(500, 8);
+
+ davinci_setup_mmc(0, &dm355leopard_mmc_config);
+ davinci_setup_mmc(1, &dm355leopard_mmc_config);
+
+ dm355_init_spi0(BIT(0), dm355_leopard_spi_info,
+ ARRAY_SIZE(dm355_leopard_spi_info));
+}
+
+static __init void dm355_leopard_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = dm355_leopard_map_io,
+ .init_irq = dm355_leopard_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = dm355_leopard_init,
+MACHINE_END
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/memory.h>
-#include <linux/etherdevice.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
-
+#include <linux/etherdevice.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <mach/mux.h>
#include <mach/psc.h>
#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
#define DM644X_EVM_PHY_MASK (0x2)
#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
* - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
* - ... newer boards may have more
*/
-static struct memory_accessor *at24_mem_acc;
-
-static void at24_setup(struct memory_accessor *mem_acc, void *context)
-{
- DECLARE_MAC_BUF(mac_str);
- char mac_addr[6];
-
- at24_mem_acc = mem_acc;
-
- /* Read MAC addr from EEPROM */
- if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
- printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
- print_mac(mac_str, mac_addr));
- }
-}
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
- .setup = at24_setup,
+ .setup = davinci_get_mac_addr,
+ .context = (void *)0x7f00,
};
-int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
-{
- if (at24_mem_acc)
- return at24_mem_acc->read(at24_mem_acc, buf, off, count);
- return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_read);
-
-int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
-{
- if (at24_mem_acc)
- return at24_mem_acc->write(at24_mem_acc, buf, off, count);
- return -ENODEV;
-}
-EXPORT_SYMBOL(dm6446evm_eeprom_write);
-
/*
* MSP430 supports RTC, card detection, input from IR remote, and
* a bit more. It triggers interrupts on GPIO(7) from pressing
return (buf[3] << 8) | buf[2];
}
+static int dm6444evm_mmc_get_cd(int module)
+{
+ int status = dm6444evm_msp430_get_pins();
+
+ return (status < 0) ? status : !(status & BIT(1));
+}
+
+static int dm6444evm_mmc_get_ro(int module)
+{
+ int status = dm6444evm_msp430_get_pins();
+
+ return (status < 0) ? status : status & BIT(6 + 8);
+}
+
+static struct davinci_mmc_config dm6446evm_mmc_config = {
+ .get_cd = dm6444evm_mmc_get_cd,
+ .get_ro = dm6444evm_mmc_get_ro,
+ .wires = 4,
+ .version = MMC_CTLR_VERSION_1
+};
+
static struct i2c_board_info __initdata i2c_info[] = {
{
I2C_BOARD_INFO("dm6446evm_msp", 0x23),
static void __init
davinci_evm_map_io(void)
{
- davinci_map_common_io();
dm644x_init();
}
static __init void davinci_evm_init(void)
{
struct clk *aemif_clk;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
aemif_clk = clk_get(NULL, "aemif");
clk_enable(aemif_clk);
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
+ davinci_setup_mmc(0, &dm6446evm_mmc_config);
+
davinci_serial_init(&uart_config);
+ soc_info->emac_pdata->phy_mask = DM644X_EVM_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = DM644X_EVM_MDIO_FREQUENCY;
+
/* Register the fixup for PHY on DaVinci */
phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
davinci_phy_fixup);
--- /dev/null
+/*
+ * TI DaVinci DM646X EVM board
+ *
+ * Derived from: arch/arm/mach-davinci/board-evm.c
+ * Copyright (C) 2006 Texas Instruments.
+ *
+ * (C) 2007-2008, MontaVista Software, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ *
+ */
+
+/**************************************************************************
+ * Included Files
+ **************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/root_dev.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/etherdevice.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm646x.h>
+#include <mach/common.h>
+#include <mach/psc.h>
+#include <mach/serial.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/emac.h>
+#include <mach/common.h>
+
+#define DM646X_EVM_PHY_MASK (0x2)
+#define DM646X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+/* LEDS */
+
+static struct gpio_led evm_leds[] = {
+ { .name = "DS1", .active_low = 1, },
+ { .name = "DS2", .active_low = 1, },
+ { .name = "DS3", .active_low = 1, },
+ { .name = "DS4", .active_low = 1, },
+};
+
+static __initconst struct gpio_led_platform_data evm_led_data = {
+ .num_leds = ARRAY_SIZE(evm_leds),
+ .leds = evm_leds,
+};
+
+static struct platform_device *evm_led_dev;
+
+static int evm_led_setup(struct i2c_client *client, int gpio,
+ unsigned int ngpio, void *c)
+{
+ struct gpio_led *leds = evm_leds;
+ int status;
+
+ while (ngpio--) {
+ leds->gpio = gpio++;
+ leds++;
+ };
+
+ evm_led_dev = platform_device_alloc("leds-gpio", 0);
+ platform_device_add_data(evm_led_dev, &evm_led_data,
+ sizeof(evm_led_data));
+
+ evm_led_dev->dev.parent = &client->dev;
+ status = platform_device_add(evm_led_dev);
+ if (status < 0) {
+ platform_device_put(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return status;
+}
+
+static int evm_led_teardown(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *c)
+{
+ if (evm_led_dev) {
+ platform_device_unregister(evm_led_dev);
+ evm_led_dev = NULL;
+ }
+ return 0;
+}
+
+static int evm_sw_gpio[4] = { -EINVAL, -EINVAL, -EINVAL, -EINVAL };
+
+static int evm_sw_setup(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *c)
+{
+ int status;
+ int i;
+ char label[10];
+
+ for (i = 0; i < 4; ++i) {
+ snprintf(label, 10, "user_sw%d", i);
+ status = gpio_request(gpio, label);
+ if (status)
+ goto out_free;
+ evm_sw_gpio[i] = gpio++;
+
+ status = gpio_direction_input(evm_sw_gpio[i]);
+ if (status) {
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ goto out_free;
+ }
+
+ status = gpio_export(evm_sw_gpio[i], 0);
+ if (status) {
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ goto out_free;
+ }
+ }
+ return status;
+out_free:
+ for (i = 0; i < 4; ++i) {
+ if (evm_sw_gpio[i] != -EINVAL) {
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ }
+ }
+ return status;
+}
+
+static int evm_sw_teardown(struct i2c_client *client, int gpio,
+ unsigned ngpio, void *c)
+{
+ int i;
+
+ for (i = 0; i < 4; ++i) {
+ if (evm_sw_gpio[i] != -EINVAL) {
+ gpio_unexport(evm_sw_gpio[i]);
+ gpio_free(evm_sw_gpio[i]);
+ evm_sw_gpio[i] = -EINVAL;
+ }
+ }
+ return 0;
+}
+
+static int evm_pcf_setup(struct i2c_client *client, int gpio,
+ unsigned int ngpio, void *c)
+{
+ int status;
+
+ if (ngpio < 8)
+ return -EINVAL;
+
+ status = evm_sw_setup(client, gpio, 4, c);
+ if (status)
+ return status;
+
+ return evm_led_setup(client, gpio+4, 4, c);
+}
+
+static int evm_pcf_teardown(struct i2c_client *client, int gpio,
+ unsigned int ngpio, void *c)
+{
+ BUG_ON(ngpio < 8);
+
+ evm_sw_teardown(client, gpio, 4, c);
+ evm_led_teardown(client, gpio+4, 4, c);
+
+ return 0;
+}
+
+static struct pcf857x_platform_data pcf_data = {
+ .gpio_base = DAVINCI_N_GPIO+1,
+ .setup = evm_pcf_setup,
+ .teardown = evm_pcf_teardown,
+};
+
+/* Most of this EEPROM is unused, but U-Boot uses some data:
+ * - 0x7f00, 6 bytes Ethernet Address
+ * - ... newer boards may have more
+ */
+
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (256*1024) / 8,
+ .page_size = 64,
+ .flags = AT24_FLAG_ADDR16,
+ .setup = davinci_get_mac_addr,
+ .context = (void *)0x7f00,
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("24c256", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ {
+ I2C_BOARD_INFO("pcf8574a", 0x38),
+ .platform_data = &pcf_data,
+ },
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 100 /* kHz */,
+ .bus_delay = 0 /* usec */,
+};
+
+static void __init evm_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static void __init davinci_map_io(void)
+{
+ dm646x_init();
+}
+
+static __init void evm_init(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ evm_init_i2c();
+ davinci_serial_init(&uart_config);
+
+ soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+}
+
+static __init void davinci_dm646x_evm_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM")
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (0x80000100),
+ .map_io = davinci_map_io,
+ .init_irq = davinci_dm646x_evm_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = evm_init,
+MACHINE_END
+
--- /dev/null
+/*
+ * Lyrtech SFFSDR board support.
+ *
+ * Copyright (C) 2008 Philip Balister, OpenSDR <philip@opensdr.com>
+ * Copyright (C) 2008 Lyrtech <www.lyrtech.com>
+ *
+ * Based on DV-EVM platform, original copyright follows:
+ *
+ * Copyright (C) 2007 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/etherdevice.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/io.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <mach/dm644x.h>
+#include <mach/common.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/common.h>
+
+#define SFFSDR_PHY_MASK (0x2)
+#define SFFSDR_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
+ /* U-Boot Environment: Block 0
+ * UBL: Block 1
+ * U-Boot: Blocks 6-7 (256 kb)
+ * Integrity Kernel: Blocks 8-31 (3 Mb)
+ * Integrity Data: Blocks 100-END
+ */
+ {
+ .name = "Linux Kernel",
+ .offset = 32 * SZ_128K,
+ .size = 16 * SZ_128K, /* 2 Mb */
+ .mask_flags = MTD_WRITEABLE, /* Force read-only */
+ },
+ {
+ .name = "Linux ROOT",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 256 * SZ_128K, /* 32 Mb */
+ .mask_flags = 0, /* R/W */
+ },
+};
+
+static struct flash_platform_data davinci_sffsdr_nandflash_data = {
+ .parts = davinci_sffsdr_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_sffsdr_nandflash_partition),
+};
+
+static struct resource davinci_sffsdr_nandflash_resource[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_sffsdr_nandflash_device = {
+ .name = "davinci_nand", /* Name of driver */
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_sffsdr_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_sffsdr_nandflash_resource),
+ .resource = davinci_sffsdr_nandflash_resource,
+};
+
+static struct emac_platform_data sffsdr_emac_pdata = {
+ .phy_mask = SFFSDR_PHY_MASK,
+ .mdio_max_freq = SFFSDR_MDIO_FREQUENCY,
+};
+
+static struct at24_platform_data eeprom_info = {
+ .byte_len = (64*1024) / 8,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("24lc64", 0x50),
+ .platform_data = &eeprom_info,
+ },
+ /* Other I2C devices:
+ * MSP430, addr 0x23 (not used)
+ * PCA9543, addr 0x70 (setup done by U-Boot)
+ * ADS7828, addr 0x48 (ADC for voltage monitoring.)
+ */
+};
+
+static struct davinci_i2c_platform_data i2c_pdata = {
+ .bus_freq = 20 /* kHz */,
+ .bus_delay = 100 /* usec */,
+};
+
+static void __init sffsdr_init_i2c(void)
+{
+ davinci_init_i2c(&i2c_pdata);
+ i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+}
+
+static struct platform_device *davinci_sffsdr_devices[] __initdata = {
+ &davinci_sffsdr_nandflash_device,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_sffsdr_map_io(void)
+{
+ dm644x_init();
+}
+
+static __init void davinci_sffsdr_init(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ platform_add_devices(davinci_sffsdr_devices,
+ ARRAY_SIZE(davinci_sffsdr_devices));
+ sffsdr_init_i2c();
+ davinci_serial_init(&uart_config);
+ soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
+ soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
+ setup_usb(0, 0); /* We support only peripheral mode. */
+
+ /* mux VLYNQ pins */
+ davinci_cfg_reg(DM644X_VLYNQEN);
+ davinci_cfg_reg(DM644X_VLYNQWD);
+}
+
+static __init void davinci_sffsdr_irq_init(void)
+{
+ davinci_irq_init();
+}
+
+MACHINE_START(SFFSDR, "Lyrtech SFFSDR")
+ /* Maintainer: Hugo Villeneuve hugo.villeneuve@lyrtech.com */
+ .phys_io = IO_PHYS,
+ .io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+ .boot_params = (DAVINCI_DDR_BASE + 0x100),
+ .map_io = davinci_sffsdr_map_io,
+ .init_irq = davinci_sffsdr_irq_init,
+ .timer = &davinci_timer,
+ .init_machine = davinci_sffsdr_init,
+MACHINE_END
if (clk->parent)
__clk_enable(clk->parent);
if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
- davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
+ davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+ clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
if (WARN_ON(clk->usecount == 0))
return;
if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
- davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+ davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
+ clk->lpsc, 0);
if (clk->parent)
__clk_disable(clk->parent);
}
continue;
/* ignore if in Disabled or SwRstDisable states */
- if (!davinci_psc_is_clk_active(ck->lpsc))
+ if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
continue;
pr_info("Clocks: disable unused %s\n", ck->name);
- davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
+ davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
}
spin_unlock_irq(&clockfw_lock);
u8 usecount;
u8 flags;
u8 lpsc;
+ u8 psc_ctlr;
struct clk *parent;
struct pll_data *pll_data;
u32 div_reg;
}
int davinci_clk_init(struct davinci_clk *clocks);
+
+extern struct platform_device davinci_wdt_device;
+
#endif
--- /dev/null
+/*
+ * Code commons to all DaVinci SoCs.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/etherdevice.h>
+
+#include <asm/tlb.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/cputype.h>
+#include <mach/emac.h>
+
+#include "clock.h"
+
+struct davinci_soc_info davinci_soc_info;
+EXPORT_SYMBOL(davinci_soc_info);
+
+void __iomem *davinci_intc_base;
+int davinci_intc_type;
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context)
+{
+ char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
+ off_t offset = (off_t)context;
+
+ /* Read MAC addr from EEPROM */
+ if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+}
+
+static struct davinci_id * __init davinci_get_id(u32 jtag_id)
+{
+ int i;
+ struct davinci_id *dip;
+ u8 variant = (jtag_id & 0xf0000000) >> 28;
+ u16 part_no = (jtag_id & 0x0ffff000) >> 12;
+
+ for (i = 0, dip = davinci_soc_info.ids; i < davinci_soc_info.ids_num;
+ i++, dip++)
+ /* Don't care about the manufacturer right now */
+ if ((dip->part_no == part_no) && (dip->variant == variant))
+ return dip;
+
+ return NULL;
+}
+
+void __init davinci_common_init(struct davinci_soc_info *soc_info)
+{
+ int ret;
+ struct davinci_id *dip;
+
+ if (!soc_info) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ memcpy(&davinci_soc_info, soc_info, sizeof(struct davinci_soc_info));
+
+ if (davinci_soc_info.io_desc && (davinci_soc_info.io_desc_num > 0))
+ iotable_init(davinci_soc_info.io_desc,
+ davinci_soc_info.io_desc_num);
+
+ /*
+ * Normally devicemaps_init() would flush caches and tlb after
+ * mdesc->map_io(), but we must also do it here because of the CPU
+ * revision check below.
+ */
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*
+ * We want to check CPU revision early for cpu_is_xxxx() macros.
+ * IO space mapping must be initialized before we can do that.
+ */
+ davinci_soc_info.jtag_id = __raw_readl(davinci_soc_info.jtag_id_base);
+
+ dip = davinci_get_id(davinci_soc_info.jtag_id);
+ if (!dip) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ davinci_soc_info.cpu_id = dip->cpu_id;
+ pr_info("DaVinci %s variant 0x%x\n", dip->name, dip->variant);
+
+ if (davinci_soc_info.cpu_clks) {
+ ret = davinci_clk_init(davinci_soc_info.cpu_clks);
+
+ if (ret != 0)
+ goto err;
+ }
+
+ davinci_intc_base = davinci_soc_info.intc_base;
+ davinci_intc_type = davinci_soc_info.intc_type;
+ return;
+
+err:
+ pr_err("davinci_common_init: SoC Initialization failed\n");
+}
--- /dev/null
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) driver
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/cp_intc.h>
+
+static void __iomem *cp_intc_base;
+
+static inline unsigned int cp_intc_read(unsigned offset)
+{
+ return __raw_readl(cp_intc_base + offset);
+}
+
+static inline void cp_intc_write(unsigned long value, unsigned offset)
+{
+ __raw_writel(value, cp_intc_base + offset);
+}
+
+static void cp_intc_ack_irq(unsigned int irq)
+{
+ cp_intc_write(irq, CP_INTC_SYS_STAT_IDX_CLR);
+}
+
+/* Disable interrupt */
+static void cp_intc_mask_irq(unsigned int irq)
+{
+ /* XXX don't know why we need to disable nIRQ here... */
+ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR);
+ cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_CLR);
+ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+}
+
+/* Enable interrupt */
+static void cp_intc_unmask_irq(unsigned int irq)
+{
+ cp_intc_write(irq, CP_INTC_SYS_ENABLE_IDX_SET);
+}
+
+static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
+{
+ unsigned reg = BIT_WORD(irq);
+ unsigned mask = BIT_MASK(irq);
+ unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg));
+ unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg));
+
+ switch (flow_type) {
+ case IRQ_TYPE_EDGE_RISING:
+ polarity |= mask;
+ type |= mask;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ polarity &= ~mask;
+ type |= mask;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ polarity |= mask;
+ type &= ~mask;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ polarity &= ~mask;
+ type &= ~mask;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ cp_intc_write(polarity, CP_INTC_SYS_POLARITY(reg));
+ cp_intc_write(type, CP_INTC_SYS_TYPE(reg));
+
+ return 0;
+}
+
+static struct irq_chip cp_intc_irq_chip = {
+ .name = "cp_intc",
+ .ack = cp_intc_ack_irq,
+ .mask = cp_intc_mask_irq,
+ .unmask = cp_intc_unmask_irq,
+ .set_type = cp_intc_set_irq_type,
+};
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+ u8 *irq_prio)
+{
+ unsigned num_reg = BITS_TO_LONGS(num_irq);
+ int i;
+
+ cp_intc_base = base;
+
+ cp_intc_write(0, CP_INTC_GLOBAL_ENABLE);
+
+ /* Disable all host interrupts */
+ cp_intc_write(0, CP_INTC_HOST_ENABLE(0));
+
+ /* Disable system interrupts */
+ for (i = 0; i < num_reg; i++)
+ cp_intc_write(~0, CP_INTC_SYS_ENABLE_CLR(i));
+
+ /* Set to normal mode, no nesting, no priority hold */
+ cp_intc_write(0, CP_INTC_CTRL);
+ cp_intc_write(0, CP_INTC_HOST_CTRL);
+
+ /* Clear system interrupt status */
+ for (i = 0; i < num_reg; i++)
+ cp_intc_write(~0, CP_INTC_SYS_STAT_CLR(i));
+
+ /* Enable nIRQ (what about nFIQ?) */
+ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET);
+
+ /*
+ * Priority is determined by host channel: lower channel number has
+ * higher priority i.e. channel 0 has highest priority and channel 31
+ * had the lowest priority.
+ */
+ num_reg = (num_irq + 3) >> 2; /* 4 channels per register */
+ if (irq_prio) {
+ unsigned j, k;
+ u32 val;
+
+ for (k = i = 0; i < num_reg; i++) {
+ for (val = j = 0; j < 4; j++, k++) {
+ val >>= 8;
+ if (k < num_irq)
+ val |= irq_prio[k] << 24;
+ }
+
+ cp_intc_write(val, CP_INTC_CHAN_MAP(i));
+ }
+ } else {
+ /*
+ * Default everything to channel 15 if priority not specified.
+ * Note that channel 0-1 are mapped to nFIQ and channels 2-31
+ * are mapped to nIRQ.
+ */
+ for (i = 0; i < num_reg; i++)
+ cp_intc_write(0x0f0f0f0f, CP_INTC_CHAN_MAP(i));
+ }
+
+ /* Set up genirq dispatching for cp_intc */
+ for (i = 0; i < num_irq; i++) {
+ set_irq_chip(i, &cp_intc_irq_chip);
+ set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
+ set_irq_handler(i, handle_edge_irq);
+ }
+
+ /* Enable global interrupt */
+ cp_intc_write(1, CP_INTC_GLOBAL_ENABLE);
+}
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
+#include <mach/edma.h>
+#include <mach/mmc.h>
+#include <mach/time.h>
#define DAVINCI_I2C_BASE 0x01C21000
+#define DAVINCI_MMCSD0_BASE 0x01E10000
+#define DM355_MMCSD0_BASE 0x01E11000
+#define DM355_MMCSD1_BASE 0x01E00000
static struct resource i2c_resources[] = {
{
(void) platform_device_register(&davinci_i2c_device);
}
+#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+
+static u64 mmcsd0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd0_resources[] = {
+ {
+ /* different on dm355 */
+ .start = DAVINCI_MMCSD0_BASE,
+ .end = DAVINCI_MMCSD0_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /* IRQs: MMC/SD, then SDIO */
+ {
+ .start = IRQ_MMCINT,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ /* different on dm355 */
+ .start = IRQ_SDIOINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* DMA channels: RX, then TX */
+ {
+ .start = DAVINCI_DMA_MMCRXEVT,
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = DAVINCI_DMA_MMCTXEVT,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device davinci_mmcsd0_device = {
+ .name = "davinci_mmc",
+ .id = 0,
+ .dev = {
+ .dma_mask = &mmcsd0_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(mmcsd0_resources),
+ .resource = mmcsd0_resources,
+};
+
+static u64 mmcsd1_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource mmcsd1_resources[] = {
+ {
+ .start = DM355_MMCSD1_BASE,
+ .end = DM355_MMCSD1_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ /* IRQs: MMC/SD, then SDIO */
+ {
+ .start = IRQ_DM355_MMCINT1,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = IRQ_DM355_SDIOINT1,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* DMA channels: RX, then TX */
+ {
+ .start = 30, /* rx */
+ .flags = IORESOURCE_DMA,
+ }, {
+ .start = 31, /* tx */
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct platform_device davinci_mmcsd1_device = {
+ .name = "davinci_mmc",
+ .id = 1,
+ .dev = {
+ .dma_mask = &mmcsd1_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(mmcsd1_resources),
+ .resource = mmcsd1_resources,
+};
+
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+ struct platform_device *pdev = NULL;
+
+ if (WARN_ON(cpu_is_davinci_dm646x()))
+ return;
+
+ /* REVISIT: update PINMUX, ARM_IRQMUX, and EDMA_EVTMUX here too;
+ * for example if MMCSD1 is used for SDIO, maybe DAT2 is unused.
+ *
+ * FIXME dm6441 (no MMC/SD), dm357 (one), and dm335 (two) are
+ * not handled right here ...
+ */
+ switch (module) {
+ case 1:
+ if (!cpu_is_davinci_dm355())
+ break;
+
+ /* REVISIT we may not need all these pins if e.g. this
+ * is a hard-wired SDIO device...
+ */
+ davinci_cfg_reg(DM355_SD1_CMD);
+ davinci_cfg_reg(DM355_SD1_CLK);
+ davinci_cfg_reg(DM355_SD1_DATA0);
+ davinci_cfg_reg(DM355_SD1_DATA1);
+ davinci_cfg_reg(DM355_SD1_DATA2);
+ davinci_cfg_reg(DM355_SD1_DATA3);
+
+ pdev = &davinci_mmcsd1_device;
+ break;
+ case 0:
+ if (cpu_is_davinci_dm355()) {
+ mmcsd0_resources[0].start = DM355_MMCSD0_BASE;
+ mmcsd0_resources[0].end = DM355_MMCSD0_BASE + SZ_4K - 1;
+ mmcsd0_resources[2].start = IRQ_DM355_SDIOINT0;
+
+ /* expose all 6 MMC0 signals: CLK, CMD, DATA[0..3] */
+ davinci_cfg_reg(DM355_MMCSD0);
+
+ /* enable RX EDMA */
+ davinci_cfg_reg(DM355_EVT26_MMC0_RX);
+ }
+
+ else if (cpu_is_davinci_dm644x()) {
+ /* REVISIT: should this be in board-init code? */
+ void __iomem *base =
+ IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+ /* Power-on 3.3V IO cells */
+ __raw_writel(0, base + DM64XX_VDD3P3V_PWDN);
+ /*Set up the pull regiter for MMC */
+ davinci_cfg_reg(DM644X_MSTK);
+ }
+
+ pdev = &davinci_mmcsd0_device;
+ break;
+ }
+
+ if (WARN_ON(!pdev))
+ return;
+
+ pdev->dev.platform_data = config;
+ platform_device_register(pdev);
+}
+
+#else
+
+void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
+{
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct resource wdt_resources[] = {
+ {
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device davinci_wdt_device = {
+ .name = "watchdog",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(wdt_resources),
+ .resource = wdt_resources,
+};
+
+static void davinci_init_wdt(void)
+{
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ wdt_resources[0].start = (resource_size_t)soc_info->wdt_base;
+ wdt_resources[0].end = (resource_size_t)soc_info->wdt_base + SZ_1K - 1;
+
+ platform_device_register(&davinci_wdt_device);
+}
+
+/*-------------------------------------------------------------------------*/
+
+struct davinci_timer_instance davinci_timer_instance[2] = {
+ {
+ .base = IO_ADDRESS(DAVINCI_TIMER0_BASE),
+ .bottom_irq = IRQ_TINT0_TINT12,
+ .top_irq = IRQ_TINT0_TINT34,
+ },
+ {
+ .base = IO_ADDRESS(DAVINCI_TIMER1_BASE),
+ .bottom_irq = IRQ_TINT1_TINT12,
+ .top_irq = IRQ_TINT1_TINT34,
+ },
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int __init davinci_init_devices(void)
+{
+ /* please keep these calls, and their implementations above,
+ * in alphabetical order so they're easier to sort through.
+ */
+ davinci_init_wdt();
+
+ return 0;
+}
+arch_initcall(davinci_init_devices);
+
--- /dev/null
+/*
+ * TI DaVinci DM355 chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm355.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/irqs.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+
+/*
+ * Device specific clocks
+ */
+#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+ .flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+ .flags = PLL_HAS_PREDIV,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ /* FIXME -- crystal rate is board-specific */
+ .rate = DM355_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .flags = CLK_PLL,
+ .pll_data = &pll1_data,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+ .name = "pll1_sysclk4",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk vpss_dac_clk = {
+ .name = "vpss_dac",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM355_LPSC_VPSS_DAC,
+};
+
+static struct clk vpss_master_clk = {
+ .name = "vpss_master",
+ .parent = &pll1_sysclk4,
+ .lpsc = DAVINCI_LPSC_VPSSMSTR,
+ .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+ .name = "vpss_slave",
+ .parent = &pll1_sysclk4,
+ .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+
+static struct clk clkout1_clk = {
+ .name = "clkout1",
+ .parent = &pll1_aux_clk,
+ /* NOTE: clkout1 can be externally gated by muxing GPIO-18 */
+};
+
+static struct clk clkout2_clk = {
+ .name = "clkout2",
+ .parent = &pll1_sysclkbp,
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2",
+ .parent = &ref_clk,
+ .flags = CLK_PLL,
+ .pll_data = &pll2_data,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclkbp = {
+ .name = "pll2_sysclkbp",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk clkout3_clk = {
+ .name = "clkout3",
+ .parent = &pll2_sysclkbp,
+ /* NOTE: clkout3 can be externally gated by muxing GPIO-16 */
+};
+
+static struct clk arm_clk = {
+ .name = "arm_clk",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+/*
+ * NOT LISTED below, and not touched by Linux
+ * - in SyncReset state by default
+ * .lpsc = DAVINCI_LPSC_TPCC,
+ * .lpsc = DAVINCI_LPSC_TPTC0,
+ * .lpsc = DAVINCI_LPSC_TPTC1,
+ * .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
+ * .lpsc = DAVINCI_LPSC_MEMSTICK,
+ * - in Enabled state by default
+ * .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
+ * .lpsc = DAVINCI_LPSC_SCR2, // "bus"
+ * .lpsc = DAVINCI_LPSC_SCR3, // "bus"
+ * .lpsc = DAVINCI_LPSC_SCR4, // "bus"
+ * .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation"
+ * .lpsc = DAVINCI_LPSC_CFG27, // "test"
+ * .lpsc = DAVINCI_LPSC_CFG3, // "test"
+ * .lpsc = DAVINCI_LPSC_CFG5, // "test"
+ */
+
+static struct clk mjcp_clk = {
+ .name = "mjcp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_IMCOP,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk asp0_clk = {
+ .name = "asp0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk asp1_clk = {
+ .name = "asp1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_McBSP1,
+};
+
+static struct clk mmcsd0_clk = {
+ .name = "mmcsd0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk mmcsd1_clk = {
+ .name = "mmcsd1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_MMC_SD1,
+};
+
+static struct clk spi0_clk = {
+ .name = "spi0",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk spi1_clk = {
+ .name = "spi1",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_SPI1,
+};
+
+static struct clk spi2_clk = {
+ .name = "spi2",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM355_LPSC_SPI2,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+ .name = "pwm2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk pwm3_clk = {
+ .name = "pwm3",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_PWM3,
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER2,
+ .usecount = 1, /* REVISIT: why cant' this be disabled? */
+};
+
+static struct clk timer3_clk = {
+ .name = "timer3",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_TIMER3,
+};
+
+static struct clk rto_clk = {
+ .name = "rto",
+ .parent = &pll1_aux_clk,
+ .lpsc = DM355_LPSC_RTO,
+};
+
+static struct clk usb_clk = {
+ .name = "usb",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct davinci_clk dm355_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+ CLK(NULL, "vpss_dac", &vpss_dac_clk),
+ CLK(NULL, "vpss_master", &vpss_master_clk),
+ CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK(NULL, "clkout1", &clkout1_clk),
+ CLK(NULL, "clkout2", &clkout2_clk),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+ CLK(NULL, "clkout3", &clkout3_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "mjcp", &mjcp_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK("soc-audio.0", NULL, &asp0_clk),
+ CLK("soc-audio.1", NULL, &asp1_clk),
+ CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
+ CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
+ CLK(NULL, "spi0", &spi0_clk),
+ CLK(NULL, "spi1", &spi1_clk),
+ CLK(NULL, "spi2", &spi2_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "pwm2", &pwm2_clk),
+ CLK(NULL, "pwm3", &pwm3_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, "timer3", &timer3_clk),
+ CLK(NULL, "rto", &rto_clk),
+ CLK(NULL, "usb", &usb_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+/*----------------------------------------------------------------------*/
+
+static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource dm355_spi0_resources[] = {
+ {
+ .start = 0x01c66000,
+ .end = 0x01c667ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DM355_SPINT0_1,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* Not yet used, so not included:
+ * IORESOURCE_IRQ:
+ * - IRQ_DM355_SPINT0_0
+ * IORESOURCE_DMA:
+ * - DAVINCI_DMA_SPI_SPIX
+ * - DAVINCI_DMA_SPI_SPIR
+ */
+};
+
+static struct platform_device dm355_spi0_device = {
+ .name = "spi_davinci",
+ .id = 0,
+ .dev = {
+ .dma_mask = &dm355_spi0_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = ARRAY_SIZE(dm355_spi0_resources),
+ .resource = dm355_spi0_resources,
+};
+
+void __init dm355_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len)
+{
+ /* for now, assume we need MISO */
+ davinci_cfg_reg(DM355_SPI0_SDI);
+
+ /* not all slaves will be wired up */
+ if (chipselect_mask & BIT(0))
+ davinci_cfg_reg(DM355_SPI0_SDENA0);
+ if (chipselect_mask & BIT(1))
+ davinci_cfg_reg(DM355_SPI0_SDENA1);
+
+ spi_register_board_info(info, len);
+
+ platform_device_register(&dm355_spi0_device);
+}
+
+/*----------------------------------------------------------------------*/
+
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+#define PINMUX2 0x08
+#define PINMUX3 0x0c
+#define PINMUX4 0x10
+#define INTMUX 0x18
+#define EVTMUX 0x1c
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm355_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false)
+
+MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false)
+MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false)
+MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false)
+MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false)
+
+MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false)
+MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false)
+
+MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false)
+MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false)
+
+MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false)
+MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false)
+MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false)
+
+INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false)
+INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false)
+INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false)
+
+EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false)
+EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false)
+EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false)
+#endif
+};
+
+static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM355_CCDC_VDINT0] = 2,
+ [IRQ_DM355_CCDC_VDINT1] = 6,
+ [IRQ_DM355_CCDC_VDINT2] = 6,
+ [IRQ_DM355_IPIPE_HST] = 6,
+ [IRQ_DM355_H3AINT] = 6,
+ [IRQ_DM355_IPIPE_SDR] = 6,
+ [IRQ_DM355_IPIPEIFINT] = 6,
+ [IRQ_DM355_OSDINT] = 7,
+ [IRQ_DM355_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_DM355_RTOINT] = 4,
+ [IRQ_DM355_UARTINT2] = 7,
+ [IRQ_DM355_TINT6] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_DM355_SPINT2_1] = 7,
+ [IRQ_DM355_TINT7] = 4,
+ [IRQ_DM355_SDIOINT0] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_DM355_MMCINT1] = 7,
+ [IRQ_DM355_PWMINT3] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM355_SDIOINT1] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_DM355_SPINT0_0] = 3,
+ [IRQ_DM355_SPINT0_1] = 3,
+ [IRQ_DM355_GPIO0] = 3,
+ [IRQ_DM355_GPIO1] = 7,
+ [IRQ_DM355_GPIO2] = 4,
+ [IRQ_DM355_GPIO3] = 4,
+ [IRQ_DM355_GPIO4] = 7,
+ [IRQ_DM355_GPIO5] = 7,
+ [IRQ_DM355_GPIO6] = 7,
+ [IRQ_DM355_GPIO7] = 7,
+ [IRQ_DM355_GPIO8] = 7,
+ [IRQ_DM355_GPIO9] = 7,
+ [IRQ_DM355_GPIOBNK0] = 7,
+ [IRQ_DM355_GPIOBNK1] = 7,
+ [IRQ_DM355_GPIOBNK2] = 7,
+ [IRQ_DM355_GPIOBNK3] = 7,
+ [IRQ_DM355_GPIOBNK4] = 7,
+ [IRQ_DM355_GPIOBNK5] = 7,
+ [IRQ_DM355_GPIOBNK6] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm355_no_event[] = {
+ 12, 13, 24, 56, 57,
+ 58, 59, 60, 61, 62,
+ 63,
+ -1
+};
+
+static struct edma_soc_info dm355_edma_info = {
+ .n_channel = 64,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .noevent = dma_chan_dm355_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using (or muxing) TC*_ERR */
+};
+
+static struct platform_device dm355_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm355_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm355_io_desc[] = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(0x00010000),
+ .length = SZ_32K,
+ /* MT_MEMORY_NONCACHED requires supersection alignment */
+ .type = MT_DEVICE,
+ },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm355_ids[] = {
+ {
+ .variant = 0x0,
+ .part_no = 0xb73b,
+ .manufacturer = 0x00f,
+ .cpu_id = DAVINCI_CPU_ID_DM355,
+ .name = "dm355",
+ },
+};
+
+static void __iomem *dm355_psc_bases[] = {
+ IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+struct davinci_timer_info dm355_timer_info = {
+ .timers = davinci_timer_instance,
+ .clockevent_id = T0_BOT,
+ .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm355_serial_platform_data[] = {
+ {
+ .mapbase = DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DM355_UART2_BASE,
+ .irq = IRQ_DM355_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device dm355_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm355_serial_platform_data,
+ },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm355 = {
+ .io_desc = dm355_io_desc,
+ .io_desc_num = ARRAY_SIZE(dm355_io_desc),
+ .jtag_id_base = IO_ADDRESS(0x01c40028),
+ .ids = dm355_ids,
+ .ids_num = ARRAY_SIZE(dm355_ids),
+ .cpu_clks = dm355_clks,
+ .psc_bases = dm355_psc_bases,
+ .psc_bases_num = ARRAY_SIZE(dm355_psc_bases),
+ .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+ .pinmux_pins = dm355_pins,
+ .pinmux_pins_num = ARRAY_SIZE(dm355_pins),
+ .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+ .intc_type = DAVINCI_INTC_TYPE_AINTC,
+ .intc_irq_prios = dm355_default_priorities,
+ .intc_irq_num = DAVINCI_N_AINTC_IRQ,
+ .timer_info = &dm355_timer_info,
+ .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE),
+ .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
+ .gpio_num = 104,
+ .gpio_irq = IRQ_DM355_GPIOBNK0,
+ .serial_dev = &dm355_serial_device,
+ .sram_dma = 0x00010000,
+ .sram_len = SZ_32K,
+};
+
+void __init dm355_init(void)
+{
+ davinci_common_init(&davinci_soc_info_dm355);
+}
+
+static int __init dm355_init_devices(void)
+{
+ if (!cpu_is_davinci_dm355())
+ return 0;
+
+ davinci_cfg_reg(DM355_INT_EDMA_CC);
+ platform_device_register(&dm355_edma_device);
+ return 0;
+}
+postcore_initcall(dm355_init_devices);
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
+#include <linux/serial_8250.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
#include <mach/dm644x.h>
#include <mach/clock.h>
#include <mach/irqs.h>
#include <mach/psc.h>
#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
#include "clock.h"
#include "mux.h"
CLK(NULL, NULL, NULL),
};
-#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+static struct emac_platform_data dm644x_emac_pdata = {
+ .ctrl_reg_offset = DM644X_EMAC_CNTRL_OFFSET,
+ .ctrl_mod_reg_offset = DM644X_EMAC_CNTRL_MOD_OFFSET,
+ .ctrl_ram_offset = DM644X_EMAC_CNTRL_RAM_OFFSET,
+ .mdio_reg_offset = DM644X_EMAC_MDIO_OFFSET,
+ .ctrl_ram_size = DM644X_EMAC_CNTRL_RAM_SIZE,
+ .version = EMAC_VERSION_1,
+};
static struct resource dm644x_emac_resources[] = {
{
static struct platform_device dm644x_emac_device = {
.name = "davinci_emac",
.id = 1,
+ .dev = {
+ .platform_data = &dm644x_emac_pdata,
+ },
.num_resources = ARRAY_SIZE(dm644x_emac_resources),
.resource = dm644x_emac_resources,
};
-#endif
+#define PINMUX0 0x00
+#define PINMUX1 0x04
/*
* Device specific mux setup
* reg offset mask mode
*/
static const struct mux_config dm644x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
+#endif
};
+/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
+static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_VDINT0] = 2,
+ [IRQ_VDINT1] = 6,
+ [IRQ_VDINT2] = 6,
+ [IRQ_HISTINT] = 6,
+ [IRQ_H3AINT] = 6,
+ [IRQ_PRVUINT] = 6,
+ [IRQ_RSZINT] = 6,
+ [7] = 7,
+ [IRQ_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_VLCDINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_EMACINT] = 4,
+ [14] = 7,
+ [15] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_PSCIN] = 7,
+ [21] = 7,
+ [IRQ_IDE] = 4,
+ [23] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_SDIOINT] = 7,
+ [28] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_VLQINT] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_UARTINT2] = 3,
+ [IRQ_SPINT0] = 3,
+ [IRQ_SPINT1] = 3,
+ [45] = 7,
+ [IRQ_DSP2ARM0] = 4,
+ [IRQ_DSP2ARM1] = 4,
+ [IRQ_GPIO0] = 7,
+ [IRQ_GPIO1] = 7,
+ [IRQ_GPIO2] = 7,
+ [IRQ_GPIO3] = 7,
+ [IRQ_GPIO4] = 7,
+ [IRQ_GPIO5] = 7,
+ [IRQ_GPIO6] = 7,
+ [IRQ_GPIO7] = 7,
+ [IRQ_GPIOBNK0] = 7,
+ [IRQ_GPIOBNK1] = 7,
+ [IRQ_GPIOBNK2] = 7,
+ [IRQ_GPIOBNK3] = 7,
+ [IRQ_GPIOBNK4] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
/*----------------------------------------------------------------------*/
};
/*----------------------------------------------------------------------*/
+
+static struct map_desc dm644x_io_desc[] = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(0x00008000),
+ .length = SZ_16K,
+ /* MT_MEMORY_NONCACHED requires supersection alignment */
+ .type = MT_DEVICE,
+ },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm644x_ids[] = {
+ {
+ .variant = 0x0,
+ .part_no = 0xb700,
+ .manufacturer = 0x017,
+ .cpu_id = DAVINCI_CPU_ID_DM6446,
+ .name = "dm6446",
+ },
+};
+
+static void __iomem *dm644x_psc_bases[] = {
+ IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+struct davinci_timer_info dm644x_timer_info = {
+ .timers = davinci_timer_instance,
+ .clockevent_id = T0_BOT,
+ .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm644x_serial_platform_data[] = {
+ {
+ .mapbase = DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device dm644x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm644x_serial_platform_data,
+ },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm644x = {
+ .io_desc = dm644x_io_desc,
+ .io_desc_num = ARRAY_SIZE(dm644x_io_desc),
+ .jtag_id_base = IO_ADDRESS(0x01c40028),
+ .ids = dm644x_ids,
+ .ids_num = ARRAY_SIZE(dm644x_ids),
+ .cpu_clks = dm644x_clks,
+ .psc_bases = dm644x_psc_bases,
+ .psc_bases_num = ARRAY_SIZE(dm644x_psc_bases),
+ .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+ .pinmux_pins = dm644x_pins,
+ .pinmux_pins_num = ARRAY_SIZE(dm644x_pins),
+ .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+ .intc_type = DAVINCI_INTC_TYPE_AINTC,
+ .intc_irq_prios = dm644x_default_priorities,
+ .intc_irq_num = DAVINCI_N_AINTC_IRQ,
+ .timer_info = &dm644x_timer_info,
+ .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE),
+ .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
+ .gpio_num = 71,
+ .gpio_irq = IRQ_GPIOBNK0,
+ .serial_dev = &dm644x_serial_device,
+ .emac_pdata = &dm644x_emac_pdata,
+ .sram_dma = 0x00008000,
+ .sram_len = SZ_16K,
+};
+
void __init dm644x_init(void)
{
- davinci_clk_init(dm644x_clks);
- davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+ davinci_common_init(&davinci_soc_info_dm644x);
}
static int __init dm644x_init_devices(void)
return 0;
platform_device_register(&dm644x_edma_device);
+ platform_device_register(&dm644x_emac_device);
return 0;
}
postcore_initcall(dm644x_init_devices);
--- /dev/null
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/serial_8250.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/map.h>
+
+#include <mach/dm646x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+#include <mach/time.h>
+#include <mach/serial.h>
+#include <mach/common.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM646X_REF_FREQ 27000000
+#define DM646X_AUX_FREQ 24000000
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ .rate = DM646X_REF_FREQ,
+};
+
+static struct clk aux_clkin = {
+ .name = "aux_clkin",
+ .rate = DM646X_AUX_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .pll_data = &pll1_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk4 = {
+ .name = "pll1_sysclk4",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV4,
+};
+
+static struct clk pll1_sysclk5 = {
+ .name = "pll1_sysclk5",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV5,
+};
+
+static struct clk pll1_sysclk6 = {
+ .name = "pll1_sysclk6",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV6,
+};
+
+static struct clk pll1_sysclk8 = {
+ .name = "pll1_sysclk8",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV8,
+};
+
+static struct clk pll1_sysclk9 = {
+ .name = "pll1_sysclk9",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV9,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2_clk",
+ .parent = &ref_clk,
+ .pll_data = &pll2_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk dsp_clk = {
+ .name = "dsp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DM646X_LPSC_C64X_CPU,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+ .name = "arm",
+ .parent = &pll1_sysclk2,
+ .lpsc = DM646X_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &aux_clkin,
+ .lpsc = DM646X_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &aux_clkin,
+ .lpsc = DM646X_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &aux_clkin,
+ .lpsc = DM646X_LPSC_UART2,
+};
+
+static struct clk i2c_clk = {
+ .name = "I2CCLK",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_I2C,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_GPIO,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_AEMIF,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk emac_clk = {
+ .name = "emac",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_EMAC,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_PWM0,
+ .usecount = 1, /* REVIST: disabling hangs system */
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_PWM1,
+ .usecount = 1, /* REVIST: disabling hangs system */
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_sysclk3,
+ .lpsc = DM646X_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_sysclk3,
+ .flags = ALWAYS_ENABLED, /* no LPSC, always enabled; c.f. spruep9a */
+};
+
+static struct clk vpif0_clk = {
+ .name = "vpif0",
+ .parent = &ref_clk,
+ .lpsc = DM646X_LPSC_VPSSMSTR,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk vpif1_clk = {
+ .name = "vpif1",
+ .parent = &ref_clk,
+ .lpsc = DM646X_LPSC_VPSSSLV,
+ .flags = ALWAYS_ENABLED,
+};
+
+struct davinci_clk dm646x_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "aux", &aux_clkin),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk4),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk5),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk6),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk8),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclk9),
+ CLK(NULL, "pll1_sysclk", &pll1_sysclkbp),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "dsp", &dsp_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, "vpif0", &vpif0_clk),
+ CLK(NULL, "vpif1", &vpif1_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+static struct emac_platform_data dm646x_emac_pdata = {
+ .ctrl_reg_offset = DM646X_EMAC_CNTRL_OFFSET,
+ .ctrl_mod_reg_offset = DM646X_EMAC_CNTRL_MOD_OFFSET,
+ .ctrl_ram_offset = DM646X_EMAC_CNTRL_RAM_OFFSET,
+ .mdio_reg_offset = DM646X_EMAC_MDIO_OFFSET,
+ .ctrl_ram_size = DM646X_EMAC_CNTRL_RAM_SIZE,
+ .version = EMAC_VERSION_2,
+};
+
+static struct resource dm646x_emac_resources[] = {
+ {
+ .start = DM646X_EMAC_BASE,
+ .end = DM646X_EMAC_BASE + 0x47ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_DM646X_EMACRXTHINT,
+ .end = IRQ_DM646X_EMACRXTHINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_EMACRXINT,
+ .end = IRQ_DM646X_EMACRXINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_EMACTXINT,
+ .end = IRQ_DM646X_EMACTXINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_DM646X_EMACMISCINT,
+ .end = IRQ_DM646X_EMACMISCINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm646x_emac_device = {
+ .name = "davinci_emac",
+ .id = 1,
+ .dev = {
+ .platform_data = &dm646x_emac_pdata,
+ },
+ .num_resources = ARRAY_SIZE(dm646x_emac_resources),
+ .resource = dm646x_emac_resources,
+};
+
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm646x_pins[] = {
+#ifdef CONFIG_DAVINCI_MUX
+MUX_CFG(DM646X, ATAEN, 0, 0, 1, 1, true)
+
+MUX_CFG(DM646X, AUDCK1, 0, 29, 1, 0, false)
+
+MUX_CFG(DM646X, AUDCK0, 0, 28, 1, 0, false)
+
+MUX_CFG(DM646X, CRGMUX, 0, 24, 7, 5, true)
+
+MUX_CFG(DM646X, STSOMUX_DISABLE, 0, 22, 3, 0, true)
+
+MUX_CFG(DM646X, STSIMUX_DISABLE, 0, 20, 3, 0, true)
+
+MUX_CFG(DM646X, PTSOMUX_DISABLE, 0, 18, 3, 0, true)
+
+MUX_CFG(DM646X, PTSIMUX_DISABLE, 0, 16, 3, 0, true)
+
+MUX_CFG(DM646X, STSOMUX, 0, 22, 3, 2, true)
+
+MUX_CFG(DM646X, STSIMUX, 0, 20, 3, 2, true)
+
+MUX_CFG(DM646X, PTSOMUX_PARALLEL, 0, 18, 3, 2, true)
+
+MUX_CFG(DM646X, PTSIMUX_PARALLEL, 0, 16, 3, 2, true)
+
+MUX_CFG(DM646X, PTSOMUX_SERIAL, 0, 18, 3, 3, true)
+
+MUX_CFG(DM646X, PTSIMUX_SERIAL, 0, 16, 3, 3, true)
+#endif
+};
+
+static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM646X_VP_VERTINT0] = 7,
+ [IRQ_DM646X_VP_VERTINT1] = 7,
+ [IRQ_DM646X_VP_VERTINT2] = 7,
+ [IRQ_DM646X_VP_VERTINT3] = 7,
+ [IRQ_DM646X_VP_ERRINT] = 7,
+ [IRQ_DM646X_RESERVED_1] = 7,
+ [IRQ_DM646X_RESERVED_2] = 7,
+ [IRQ_DM646X_WDINT] = 7,
+ [IRQ_DM646X_CRGENINT0] = 7,
+ [IRQ_DM646X_CRGENINT1] = 7,
+ [IRQ_DM646X_TSIFINT0] = 7,
+ [IRQ_DM646X_TSIFINT1] = 7,
+ [IRQ_DM646X_VDCEINT] = 7,
+ [IRQ_DM646X_USBINT] = 7,
+ [IRQ_DM646X_USBDMAINT] = 7,
+ [IRQ_DM646X_PCIINT] = 7,
+ [IRQ_CCINT0] = 7, /* dma */
+ [IRQ_CCERRINT] = 7, /* dma */
+ [IRQ_TCERRINT0] = 7, /* dma */
+ [IRQ_TCERRINT] = 7, /* dma */
+ [IRQ_DM646X_TCERRINT2] = 7,
+ [IRQ_DM646X_TCERRINT3] = 7,
+ [IRQ_DM646X_IDE] = 7,
+ [IRQ_DM646X_HPIINT] = 7,
+ [IRQ_DM646X_EMACRXTHINT] = 7,
+ [IRQ_DM646X_EMACRXINT] = 7,
+ [IRQ_DM646X_EMACTXINT] = 7,
+ [IRQ_DM646X_EMACMISCINT] = 7,
+ [IRQ_DM646X_MCASP0TXINT] = 7,
+ [IRQ_DM646X_MCASP0RXINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM646X_RESERVED_3] = 7,
+ [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
+ [IRQ_TINT0_TINT34] = 7, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_DM646X_VLQINT] = 7,
+ [IRQ_I2C] = 7,
+ [IRQ_UARTINT0] = 7,
+ [IRQ_UARTINT1] = 7,
+ [IRQ_DM646X_UARTINT2] = 7,
+ [IRQ_DM646X_SPINT0] = 7,
+ [IRQ_DM646X_SPINT1] = 7,
+ [IRQ_DM646X_DSP2ARMINT] = 7,
+ [IRQ_DM646X_RESERVED_4] = 7,
+ [IRQ_DM646X_PSCINT] = 7,
+ [IRQ_DM646X_GPIO0] = 7,
+ [IRQ_DM646X_GPIO1] = 7,
+ [IRQ_DM646X_GPIO2] = 7,
+ [IRQ_DM646X_GPIO3] = 7,
+ [IRQ_DM646X_GPIO4] = 7,
+ [IRQ_DM646X_GPIO5] = 7,
+ [IRQ_DM646X_GPIO6] = 7,
+ [IRQ_DM646X_GPIO7] = 7,
+ [IRQ_DM646X_GPIOBNK0] = 7,
+ [IRQ_DM646X_GPIOBNK1] = 7,
+ [IRQ_DM646X_GPIOBNK2] = 7,
+ [IRQ_DM646X_DDRINT] = 7,
+ [IRQ_DM646X_AEMIFINT] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm646x_no_event[] = {
+ 0, 1, 2, 3, 13,
+ 14, 15, 24, 25, 26,
+ 27, 30, 31, 54, 55,
+ 56,
+ -1
+};
+
+static struct edma_soc_info dm646x_edma_info = {
+ .n_channel = 64,
+ .n_region = 6, /* 0-1, 4-7 */
+ .n_slot = 512,
+ .n_tc = 4,
+ .noevent = dma_chan_dm646x_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc2",
+ .start = 0x01c10800,
+ .end = 0x01c10800 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc3",
+ .start = 0x01c10c00,
+ .end = 0x01c10c00 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using TC*_ERR */
+};
+
+static struct platform_device dm646x_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm646x_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+
+static struct map_desc dm646x_io_desc[] = {
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
+ {
+ .virtual = SRAM_VIRT,
+ .pfn = __phys_to_pfn(0x00010000),
+ .length = SZ_32K,
+ /* MT_MEMORY_NONCACHED requires supersection alignment */
+ .type = MT_DEVICE,
+ },
+};
+
+/* Contents of JTAG ID register used to identify exact cpu type */
+static struct davinci_id dm646x_ids[] = {
+ {
+ .variant = 0x0,
+ .part_no = 0xb770,
+ .manufacturer = 0x017,
+ .cpu_id = DAVINCI_CPU_ID_DM6467,
+ .name = "dm6467",
+ },
+};
+
+static void __iomem *dm646x_psc_bases[] = {
+ IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
+};
+
+/*
+ * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
+ * T0_TOP: Timer 0, top : clocksource for generic timekeeping
+ * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
+ * T1_TOP: Timer 1, top : <unused>
+ */
+struct davinci_timer_info dm646x_timer_info = {
+ .timers = davinci_timer_instance,
+ .clockevent_id = T0_BOT,
+ .clocksource_id = T0_TOP,
+};
+
+static struct plat_serial8250_port dm646x_serial_platform_data[] = {
+ {
+ .mapbase = DAVINCI_UART0_BASE,
+ .irq = IRQ_UARTINT0,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_DM646X_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM32,
+ .regshift = 2,
+ },
+ {
+ .flags = 0
+ },
+};
+
+static struct platform_device dm646x_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = dm646x_serial_platform_data,
+ },
+};
+
+static struct davinci_soc_info davinci_soc_info_dm646x = {
+ .io_desc = dm646x_io_desc,
+ .io_desc_num = ARRAY_SIZE(dm646x_io_desc),
+ .jtag_id_base = IO_ADDRESS(0x01c40028),
+ .ids = dm646x_ids,
+ .ids_num = ARRAY_SIZE(dm646x_ids),
+ .cpu_clks = dm646x_clks,
+ .psc_bases = dm646x_psc_bases,
+ .psc_bases_num = ARRAY_SIZE(dm646x_psc_bases),
+ .pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
+ .pinmux_pins = dm646x_pins,
+ .pinmux_pins_num = ARRAY_SIZE(dm646x_pins),
+ .intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
+ .intc_type = DAVINCI_INTC_TYPE_AINTC,
+ .intc_irq_prios = dm646x_default_priorities,
+ .intc_irq_num = DAVINCI_N_AINTC_IRQ,
+ .timer_info = &dm646x_timer_info,
+ .wdt_base = IO_ADDRESS(DAVINCI_WDOG_BASE),
+ .gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
+ .gpio_num = 43, /* Only 33 usable */
+ .gpio_irq = IRQ_DM646X_GPIOBNK0,
+ .serial_dev = &dm646x_serial_device,
+ .emac_pdata = &dm646x_emac_pdata,
+ .sram_dma = 0x10010000,
+ .sram_len = SZ_32K,
+};
+
+void __init dm646x_init(void)
+{
+ davinci_common_init(&davinci_soc_info_dm646x);
+}
+
+static int __init dm646x_init_devices(void)
+{
+ if (!cpu_is_davinci_dm646x())
+ return 0;
+
+ platform_device_register(&dm646x_edma_device);
+ platform_device_register(&dm646x_emac_device);
+ return 0;
+}
+postcore_initcall(dm646x_init_devices);
#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
+#include <mach/common.h>
#include <mach/gpio.h>
#include <asm/mach/irq.h>
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
-static unsigned __initdata ngpio;
-
/* create a non-inlined version */
static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
+static int __init davinci_gpio_irq_setup(void);
/*--------------------------------------------------------------------------*/
static int __init davinci_gpio_setup(void)
{
int i, base;
+ unsigned ngpio;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
- /* The gpio banks conceptually expose a segmented bitmap,
+ /*
+ * The gpio banks conceptually expose a segmented bitmap,
* and "ngpio" is one more than the largest zero-based
* bit index that's valid.
*/
- if (cpu_is_davinci_dm355()) { /* or dm335() */
- ngpio = 104;
- } else if (cpu_is_davinci_dm644x()) { /* or dm337() */
- ngpio = 71;
- } else if (cpu_is_davinci_dm646x()) {
- /* NOTE: each bank has several "reserved" bits,
- * unusable as GPIOs. Only 33 of the GPIO numbers
- * are usable, and we're not rejecting the others.
- */
- ngpio = 43;
- } else {
- /* if cpu_is_davinci_dm643x() ngpio = 111 */
+ ngpio = soc_info->gpio_num;
+ if (ngpio == 0) {
pr_err("GPIO setup: how many GPIOs?\n");
return -EINVAL;
}
gpiochip_add(&chips[i].chip);
}
+ davinci_gpio_irq_setup();
return 0;
}
pure_initcall(davinci_gpio_setup);
{
struct gpio_controller *__iomem g = get_irq_chip_data(irq);
u32 mask = __gpio_mask(irq_to_gpio(irq));
+ unsigned status = irq_desc[irq].status;
+
+ status &= IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
+ if (!status)
+ status = IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING;
- if (irq_desc[irq].status & IRQ_TYPE_EDGE_FALLING)
+ if (status & IRQ_TYPE_EDGE_FALLING)
__raw_writel(mask, &g->set_falling);
- if (irq_desc[irq].status & IRQ_TYPE_EDGE_RISING)
+ if (status & IRQ_TYPE_EDGE_RISING)
__raw_writel(mask, &g->set_rising);
}
irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
irq_desc[irq].status |= trigger;
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
- ? &g->set_falling : &g->clr_falling);
- __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
- ? &g->set_rising : &g->clr_rising);
+ /* don't enable the IRQ if it's currently disabled */
+ if (irq_desc[irq].depth == 0) {
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_FALLING)
+ ? &g->set_falling : &g->clr_falling);
+ __raw_writel(mask, (trigger & IRQ_TYPE_EDGE_RISING)
+ ? &g->set_rising : &g->clr_rising);
+ }
return 0;
}
mask <<= 16;
/* temporarily mask (level sensitive) parent IRQ */
+ desc->chip->mask(irq);
desc->chip->ack(irq);
while (1) {
u32 status;
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
- unsigned bank_irq;
struct clk *clk;
u32 binten = 0;
+ unsigned ngpio, bank_irq;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ ngpio = soc_info->gpio_num;
- if (cpu_is_davinci_dm355()) { /* or dm335() */
- bank_irq = IRQ_DM355_GPIOBNK0;
- } else if (cpu_is_davinci_dm644x()) {
- bank_irq = IRQ_GPIOBNK0;
- } else if (cpu_is_davinci_dm646x()) {
- bank_irq = IRQ_DM646X_GPIOBNK0;
- } else {
+ bank_irq = soc_info->gpio_irq;
+ if (bank_irq == 0) {
printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
return -EINVAL;
}
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
- __raw_writel(binten, (void *__iomem)
- IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
+ __raw_writel(binten, soc_info->gpio_base + 0x08);
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
-arch_initcall(davinci_gpio_irq_setup);
+++ /dev/null
-/*
- * Davinci CPU identification code
- *
- * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com>
- *
- * Derived from OMAP1 CPU identification code.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
-
-static unsigned int davinci_revision;
-
-struct davinci_id {
- u8 variant; /* JTAG ID bits 31:28 */
- u16 part_no; /* JTAG ID bits 27:12 */
- u32 manufacturer; /* JTAG ID bits 11:1 */
- u32 type; /* Cpu id bits [31:8], cpu class bits [7:0] */
-};
-
-/* Register values to detect the DaVinci version */
-static struct davinci_id davinci_ids[] __initdata = {
- {
- /* DM6446 */
- .part_no = 0xb700,
- .variant = 0x0,
- .manufacturer = 0x017,
- .type = 0x64460000,
- },
- {
- /* DM646X */
- .part_no = 0xb770,
- .variant = 0x0,
- .manufacturer = 0x017,
- .type = 0x64670000,
- },
- {
- /* DM355 */
- .part_no = 0xb73b,
- .variant = 0x0,
- .manufacturer = 0x00f,
- .type = 0x03550000,
- },
-};
-
-/*
- * Get Device Part No. from JTAG ID register
- */
-static u16 __init davinci_get_part_no(void)
-{
- u32 dev_id, part_no;
-
- dev_id = __raw_readl(JTAG_ID_BASE);
-
- part_no = ((dev_id >> 12) & 0xffff);
-
- return part_no;
-}
-
-/*
- * Get Device Revision from JTAG ID register
- */
-static u8 __init davinci_get_variant(void)
-{
- u32 variant;
-
- variant = __raw_readl(JTAG_ID_BASE);
-
- variant = (variant >> 28) & 0xf;
-
- return variant;
-}
-
-unsigned int davinci_rev(void)
-{
- return davinci_revision >> 16;
-}
-EXPORT_SYMBOL(davinci_rev);
-
-void __init davinci_check_revision(void)
-{
- int i;
- u16 part_no;
- u8 variant;
-
- part_no = davinci_get_part_no();
- variant = davinci_get_variant();
-
- /* First check only the major version in a safe way */
- for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
- if (part_no == (davinci_ids[i].part_no)) {
- davinci_revision = davinci_ids[i].type;
- break;
- }
- }
-
- /* Check if we can find the dev revision */
- for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
- if (part_no == davinci_ids[i].part_no &&
- variant == davinci_ids[i].variant) {
- davinci_revision = davinci_ids[i].type;
- break;
- }
- }
-
- printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
- davinci_rev(), variant);
-}
+++ /dev/null
-/*
- * DaVinci DM6446 EVM board specific headers
- *
- * Author: Kevin Hilman, Deep Root Systems, LLC
- *
- * 2007 (c) Deep Root Systems, LLC. This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or ifndef.
- */
-
-#ifndef _MACH_DAVINCI_DM6446EVM_H
-#define _MACH_DAVINCI_DM6446EVM_H
-
-#include <linux/types.h>
-
-int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
-int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
-
-#endif
extern struct sys_timer davinci_timer;
extern void davinci_irq_init(void);
-extern void davinci_map_common_io(void);
+extern void __iomem *davinci_intc_base;
+extern int davinci_intc_type;
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+struct davinci_timer_instance {
+ void __iomem *base;
+ u32 bottom_irq;
+ u32 top_irq;
+ unsigned long cmp_off;
+ unsigned int cmp_irq;
+};
+
+struct davinci_timer_info {
+ struct davinci_timer_instance *timers;
+ unsigned int clockevent_id;
+ unsigned int clocksource_id;
+};
+
+/* SoC specific init support */
+struct davinci_soc_info {
+ struct map_desc *io_desc;
+ unsigned long io_desc_num;
+ u32 cpu_id;
+ u32 jtag_id;
+ void __iomem *jtag_id_base;
+ struct davinci_id *ids;
+ unsigned long ids_num;
+ struct davinci_clk *cpu_clks;
+ void __iomem **psc_bases;
+ unsigned long psc_bases_num;
+ void __iomem *pinmux_base;
+ const struct mux_config *pinmux_pins;
+ unsigned long pinmux_pins_num;
+ void __iomem *intc_base;
+ int intc_type;
+ u8 *intc_irq_prios;
+ unsigned long intc_irq_num;
+ struct davinci_timer_info *timer_info;
+ void __iomem *wdt_base;
+ void __iomem *gpio_base;
+ unsigned gpio_num;
+ unsigned gpio_irq;
+ struct platform_device *serial_dev;
+ struct emac_platform_data *emac_pdata;
+ dma_addr_t sram_dma;
+ unsigned sram_len;
+};
+
+extern struct davinci_soc_info davinci_soc_info;
+
+extern void davinci_common_init(struct davinci_soc_info *soc_info);
+
+/* standard place to map on-chip SRAMs; they *may* support DMA */
+#define SRAM_VIRT 0xfffe0000
+#define SRAM_SIZE SZ_128K
+
#endif /* __ARCH_ARM_MACH_DAVINCI_COMMON_H */
--- /dev/null
+/*
+ * TI Common Platform Interrupt Controller (cp_intc) definitions
+ *
+ * Author: Steve Chen <schen@mvista.com>
+ * Copyright (C) 2008-2009, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __ASM_HARDWARE_CP_INTC_H
+#define __ASM_HARDWARE_CP_INTC_H
+
+#define CP_INTC_REV 0x00
+#define CP_INTC_CTRL 0x04
+#define CP_INTC_HOST_CTRL 0x0C
+#define CP_INTC_GLOBAL_ENABLE 0x10
+#define CP_INTC_GLOBAL_NESTING_LEVEL 0x1C
+#define CP_INTC_SYS_STAT_IDX_SET 0x20
+#define CP_INTC_SYS_STAT_IDX_CLR 0x24
+#define CP_INTC_SYS_ENABLE_IDX_SET 0x28
+#define CP_INTC_SYS_ENABLE_IDX_CLR 0x2C
+#define CP_INTC_GLOBAL_WAKEUP_ENABLE 0x30
+#define CP_INTC_HOST_ENABLE_IDX_SET 0x34
+#define CP_INTC_HOST_ENABLE_IDX_CLR 0x38
+#define CP_INTC_PACING_PRESCALE 0x40
+#define CP_INTC_VECTOR_BASE 0x50
+#define CP_INTC_VECTOR_SIZE 0x54
+#define CP_INTC_VECTOR_NULL 0x58
+#define CP_INTC_PRIO_IDX 0x80
+#define CP_INTC_PRIO_VECTOR 0x84
+#define CP_INTC_SECURE_ENABLE 0x90
+#define CP_INTC_SECURE_PRIO_IDX 0x94
+#define CP_INTC_PACING_PARAM(n) (0x0100 + (n << 4))
+#define CP_INTC_PACING_DEC(n) (0x0104 + (n << 4))
+#define CP_INTC_PACING_MAP(n) (0x0108 + (n << 4))
+#define CP_INTC_SYS_RAW_STAT(n) (0x0200 + (n << 2))
+#define CP_INTC_SYS_STAT_CLR(n) (0x0280 + (n << 2))
+#define CP_INTC_SYS_ENABLE_SET(n) (0x0300 + (n << 2))
+#define CP_INTC_SYS_ENABLE_CLR(n) (0x0380 + (n << 2))
+#define CP_INTC_CHAN_MAP(n) (0x0400 + (n << 2))
+#define CP_INTC_HOST_MAP(n) (0x0800 + (n << 2))
+#define CP_INTC_HOST_PRIO_IDX(n) (0x0900 + (n << 2))
+#define CP_INTC_SYS_POLARITY(n) (0x0D00 + (n << 2))
+#define CP_INTC_SYS_TYPE(n) (0x0D80 + (n << 2))
+#define CP_INTC_WAKEUP_ENABLE(n) (0x0E00 + (n << 2))
+#define CP_INTC_DEBUG_SELECT(n) (0x0F00 + (n << 2))
+#define CP_INTC_SYS_SECURE_ENABLE(n) (0x1000 + (n << 2))
+#define CP_INTC_HOST_NESTING_LEVEL(n) (0x1100 + (n << 2))
+#define CP_INTC_HOST_ENABLE(n) (0x1500 + (n << 2))
+#define CP_INTC_HOST_PRIO_VECTOR(n) (0x1600 + (n << 2))
+#define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2))
+
+void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
+ u8 *irq_prio);
+
+#endif /* __ASM_HARDWARE_CP_INTC_H */
#ifndef _ASM_ARCH_CPU_H
#define _ASM_ARCH_CPU_H
-extern unsigned int davinci_rev(void);
+#include <mach/common.h>
-#define IS_DAVINCI_CPU(type, id) \
-static inline int is_davinci_dm ##type(void) \
-{ \
- return (davinci_rev() == (id)) ? 1 : 0; \
+struct davinci_id {
+ u8 variant; /* JTAG ID bits 31:28 */
+ u16 part_no; /* JTAG ID bits 27:12 */
+ u16 manufacturer; /* JTAG ID bits 11:1 */
+ u32 cpu_id;
+ char *name;
+};
+
+/* Can use lower 16 bits of cpu id for a variant when required */
+#define DAVINCI_CPU_ID_DM6446 0x64460000
+#define DAVINCI_CPU_ID_DM6467 0x64670000
+#define DAVINCI_CPU_ID_DM355 0x03550000
+
+#define IS_DAVINCI_CPU(type, id) \
+static inline int is_davinci_ ##type(void) \
+{ \
+ return (davinci_soc_info.cpu_id == (id)); \
}
-IS_DAVINCI_CPU(644x, 0x6446)
-IS_DAVINCI_CPU(646x, 0x6467)
-IS_DAVINCI_CPU(355, 0x355)
+IS_DAVINCI_CPU(dm644x, DAVINCI_CPU_ID_DM6446)
+IS_DAVINCI_CPU(dm646x, DAVINCI_CPU_ID_DM6467)
+IS_DAVINCI_CPU(dm355, DAVINCI_CPU_ID_DM355)
#ifdef CONFIG_ARCH_DAVINCI_DM644x
#define cpu_is_davinci_dm644x() is_davinci_dm644x()
* or implied.
*/
+/* Modifications
+ * Jan 2009 Chaithrika U S Added senduart, busyuart, waituart
+ * macros, based on debug-8250.S file
+ * but using 32-bit accesses required for
+ * some davinci devices.
+ */
+
+#include <linux/serial_reg.h>
+#define UART_SHIFT 2
+
.macro addruart, rx
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
orr \rx, \rx, #0x00c20000 @ UART 0
.endm
-#define UART_SHIFT 2
-#include <asm/hardware/debug-8250.S>
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ .macro waituart,rd,rx
+#ifdef FLOW_CONTROL
+1001: ldr \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+#endif
+ .endm
+
--- /dev/null
+/*
+ * Chip specific defines for DM355 SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM355_H
+#define __ASM_ARCH_DM355_H
+
+#include <mach/hardware.h>
+
+struct spi_board_info;
+
+void __init dm355_init(void);
+void dm355_init_spi0(unsigned chipselect_mask,
+ struct spi_board_info *info, unsigned len);
+
+#endif /* __ASM_ARCH_DM355_H */
#include <linux/platform_device.h>
#include <mach/hardware.h>
+#include <mach/emac.h>
#define DM644X_EMAC_BASE (0x01C80000)
#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
--- /dev/null
+/*
+ * Chip specific defines for DM646x SoC
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ASM_ARCH_DM646X_H
+#define __ASM_ARCH_DM646X_H
+
+#include <mach/hardware.h>
+#include <mach/emac.h>
+
+#define DM646X_EMAC_BASE (0x01C80000)
+#define DM646X_EMAC_CNTRL_OFFSET (0x0000)
+#define DM646X_EMAC_CNTRL_MOD_OFFSET (0x1000)
+#define DM646X_EMAC_CNTRL_RAM_OFFSET (0x2000)
+#define DM646X_EMAC_MDIO_OFFSET (0x4000)
+#define DM646X_EMAC_CNTRL_RAM_SIZE (0x2000)
+
+void __init dm646x_init(void);
+
+#endif /* __ASM_ARCH_DM646X_H */
void edma_pause(unsigned channel);
void edma_resume(unsigned channel);
-/* UNRELATED TO DMA */
-int davinci_alloc_iram(unsigned size);
-void davinci_free_iram(unsigned addr, unsigned size);
-
/* platform_data for EDMA driver */
struct edma_soc_info {
--- /dev/null
+/*
+ * TI DaVinci EMAC platform support
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _MACH_DAVINCI_EMAC_H
+#define _MACH_DAVINCI_EMAC_H
+
+#include <linux/if_ether.h>
+#include <linux/memory.h>
+
+struct emac_platform_data {
+ char mac_addr[ETH_ALEN];
+ u32 ctrl_reg_offset;
+ u32 ctrl_mod_reg_offset;
+ u32 ctrl_ram_offset;
+ u32 mdio_reg_offset;
+ u32 ctrl_ram_size;
+ u32 phy_mask;
+ u32 mdio_max_freq;
+ u8 rmii_en;
+ u8 version;
+};
+
+enum {
+ EMAC_VERSION_1, /* DM644x */
+ EMAC_VERSION_2, /* DM646x */
+};
+
+void davinci_get_mac_addr(struct memory_accessor *mem_acc, void *context);
+#endif
.endm
.macro get_irqnr_preamble, base, tmp
- ldr \base, =IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+ ldr \base, =davinci_intc_base
+ ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+#if defined(CONFIG_AINTC) && defined(CONFIG_CP_INTC)
+ ldr \tmp, =davinci_intc_type
+ ldr \tmp, [\tmp]
+ cmp \tmp, #DAVINCI_INTC_TYPE_CP_INTC
+ beq 1001f
+#endif
+#if defined(CONFIG_AINTC)
ldr \tmp, [\base, #0x14]
- mov \tmp, \tmp, lsr #2
+ movs \tmp, \tmp, lsr #2
sub \irqnr, \tmp, #1
- cmp \tmp, #0
+ b 1002f
+#endif
+#if defined(CONFIG_CP_INTC)
+1001: ldr \irqnr, [\base, #0x80] /* get irq number */
+ and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */
+ mov \tmp, \irqnr, lsr #3
+ and \tmp, \tmp, #0xfc
+ add \tmp, \tmp, #0x280 /* get the register offset */
+ ldr \irqstat, [\base, \tmp] /* get the intc status */
+ cmp \irqstat, #0x0
+#endif
+1002:
.endm
.macro irq_prio_table
#include <asm-generic/gpio.h>
#include <mach/irqs.h>
+#include <mach/common.h>
#define DAVINCI_GPIO_BASE 0x01C67000
__gpio_to_controller(unsigned gpio)
{
void *__iomem ptr;
+ void __iomem *base = davinci_soc_info.gpio_base;
if (gpio < 32 * 1)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
+ ptr = base + 0x10;
else if (gpio < 32 * 2)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
+ ptr = base + 0x38;
else if (gpio < 32 * 3)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ ptr = base + 0x60;
else if (gpio < 32 * 4)
- ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
+ ptr = base + 0x88;
else
ptr = NULL;
return ptr;
{
if (gpio >= DAVINCI_N_GPIO)
return -EINVAL;
- return DAVINCI_N_AINTC_IRQ + gpio;
+ return davinci_soc_info.intc_irq_num + gpio;
}
static inline int irq_to_gpio(unsigned irq)
{
/* caller guarantees gpio_to_irq() succeeded */
- return irq - DAVINCI_N_AINTC_IRQ;
+ return irq - davinci_soc_info.intc_irq_num;
}
#endif /* __DAVINCI_GPIO_H */
/* Base address */
#define DAVINCI_ARM_INTC_BASE 0x01C48000
+#define DAVINCI_INTC_TYPE_AINTC 0
+#define DAVINCI_INTC_TYPE_CP_INTC 1
+
/* Interrupt lines */
#define IRQ_VDINT0 0
#define IRQ_VDINT1 1
* Definitions
**************************************************************************/
#define DAVINCI_DDR_BASE 0x80000000
-#define DAVINCI_IRAM_BASE 0x00008000 /* ARM Internal RAM */
#define PHYS_OFFSET DAVINCI_DDR_BASE
--- /dev/null
+/*
+ * Board-specific MMC configuration
+ */
+
+#ifndef _DAVINCI_MMC_H
+#define _DAVINCI_MMC_H
+
+#include <linux/types.h>
+#include <linux/mmc/host.h>
+
+struct davinci_mmc_config {
+ /* get_cd()/get_wp() may sleep */
+ int (*get_cd)(int module);
+ int (*get_ro)(int module);
+ /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */
+ u8 wires;
+
+ u32 max_freq;
+
+ /* any additional host capabilities: OR'd in to mmc->f_caps */
+ u32 caps;
+
+ /* Version of the MMC/SD controller */
+ u8 version;
+};
+void davinci_setup_mmc(int module, struct davinci_mmc_config *config);
+
+enum {
+ MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */
+ MMC_CTLR_VERSION_2, /* DA830 */
+};
+
+#endif
#ifndef __INC_MACH_MUX_H
#define __INC_MACH_MUX_H
-/* System module registers */
-#define PINMUX0 0x00
-#define PINMUX1 0x04
-/* dm355 only */
-#define PINMUX2 0x08
-#define PINMUX3 0x0c
-#define PINMUX4 0x10
-#define INTMUX 0x18
-#define EVTMUX 0x1c
-
struct mux_config {
const char *name;
const char *mux_reg_name;
#ifdef CONFIG_DAVINCI_MUX
/* setup pin muxing */
-extern void davinci_mux_init(void);
-extern int davinci_mux_register(const struct mux_config *pins,
- unsigned long size);
extern int davinci_cfg_reg(unsigned long reg_cfg);
#else
/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
-static inline void davinci_mux_init(void) {}
-static inline int davinci_mux_register(const struct mux_config *pins,
- unsigned long size) { return 0; }
static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
#endif
#ifndef __ASM_ARCH_PSC_H
#define __ASM_ARCH_PSC_H
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
+
/* Power and Sleep Controller (PSC) Domains */
#define DAVINCI_GPSC_ARMDOMAIN 0
#define DAVINCI_GPSC_DSPDOMAIN 1
#define DM646X_LPSC_TIMER1 35
#define DM646X_LPSC_ARM_INTC 45
-extern int davinci_psc_is_clk_active(unsigned int id);
-extern void davinci_psc_config(unsigned int domain, unsigned int id,
- char enable);
+extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+ unsigned int id, char enable);
#endif /* __ASM_ARCH_PSC_H */
#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
-#define DM355_UART2_BASE (IO_PHYS + 0x206000)
-
/* DaVinci UART register offsets */
#define UART_DAVINCI_PWREMU 0x0c
#define UART_DM646X_SCR 0x10
unsigned int enabled_uarts;
};
-extern void davinci_serial_init(struct davinci_uart_config *);
+extern int davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */
--- /dev/null
+/*
+ * mach/sram.h - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MACH_SRAM_H
+#define __MACH_SRAM_H
+
+/* ARBITRARY: SRAM allocations are multiples of this 2^N size */
+#define SRAM_GRANULARITY 512
+
+/*
+ * SRAM allocations return a CPU virtual address, or NULL on error.
+ * If a DMA address is requested and the SRAM supports DMA, its
+ * mapped address is also returned.
+ *
+ * Errors include SRAM memory not being available, and requesting
+ * DMA mapped SRAM on systems which don't allow that.
+ */
+extern void *sram_alloc(size_t len, dma_addr_t *dma);
+extern void sram_free(void *addr, size_t len);
+
+#endif /* __MACH_SRAM_H */
--- /dev/null
+/*
+ * Local header file for DaVinci time code.
+ *
+ * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef __ARCH_ARM_MACH_DAVINCI_TIME_H
+#define __ARCH_ARM_MACH_DAVINCI_TIME_H
+
+#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
+#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
+#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00)
+
+enum {
+ T0_BOT,
+ T0_TOP,
+ T1_BOT,
+ T1_TOP,
+ NUM_TIMERS
+};
+
+#define IS_TIMER1(id) (id & 0x2)
+#define IS_TIMER0(id) (!IS_TIMER1(id))
+#define IS_TIMER_TOP(id) ((id & 0x1))
+#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
+
+#define ID_TO_TIMER(id) (IS_TIMER1(id) != 0)
+
+extern struct davinci_timer_instance davinci_timer_instance[];
+
+#endif /* __ARCH_ARM_MACH_DAVINCI_TIME_H */
#include <linux/serial_reg.h>
#include <mach/serial.h>
+#include <asm/mach-types.h>
+
+extern unsigned int __machine_arch_type;
+
+static u32 *uart;
+
+static u32 *get_uart_base(void)
+{
+ /* Add logic here for new platforms, using __macine_arch_type */
+ return (u32 *)DAVINCI_UART0_BASE;
+}
+
/* PORT_16C550A, in polled non-fifo mode */
static void putc(char c)
{
- volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+ if (!uart)
+ uart = get_uart_base();
while (!(uart[UART_LSR] & UART_LSR_THRE))
barrier();
static inline void flush(void)
{
- volatile u32 *uart = (volatile void *) DAVINCI_UART0_BASE;
+ if (!uart)
+ uart = get_uart_base();
+
while (!(uart[UART_LSR] & UART_LSR_THRE))
barrier();
}
*/
#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
#include <linux/io.h>
#include <asm/tlb.h>
-#include <asm/memory.h>
-
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-
-extern void davinci_check_revision(void);
-
-/*
- * The machine specific code may provide the extra mapping besides the
- * default mapping provided here.
- */
-static struct map_desc davinci_io_desc[] __initdata = {
- {
- .virtual = IO_VIRT,
- .pfn = __phys_to_pfn(IO_PHYS),
- .length = IO_SIZE,
- .type = MT_DEVICE
- },
-};
-
-void __init davinci_map_common_io(void)
-{
- iotable_init(davinci_io_desc, ARRAY_SIZE(davinci_io_desc));
-
- /* Normally devicemaps_init() would flush caches and tlb after
- * mdesc->map_io(), but we must also do it here because of the CPU
- * revision check below.
- */
- local_flush_tlb_all();
- flush_cache_all();
-
- /* We want to check CPU revision early for cpu_is_xxxx() macros.
- * IO space mapping must be initialized before we can do that.
- */
- davinci_check_revision();
-}
#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
#include <mach/hardware.h>
#include <mach/cputype.h>
+#include <mach/common.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
-const u8 *davinci_def_priorities;
-
-#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
-
static inline unsigned int davinci_irq_readl(int offset)
{
- return __raw_readl(INTC_BASE + offset);
+ return __raw_readl(davinci_intc_base + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
- __raw_writel(value, INTC_BASE + offset);
+ __raw_writel(value, davinci_intc_base + offset);
}
/* Disable interrupt */
.unmask = davinci_unmask_irq,
};
-/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
- [IRQ_VDINT0] = 2,
- [IRQ_VDINT1] = 6,
- [IRQ_VDINT2] = 6,
- [IRQ_HISTINT] = 6,
- [IRQ_H3AINT] = 6,
- [IRQ_PRVUINT] = 6,
- [IRQ_RSZINT] = 6,
- [7] = 7,
- [IRQ_VENCINT] = 6,
- [IRQ_ASQINT] = 6,
- [IRQ_IMXINT] = 6,
- [IRQ_VLCDINT] = 6,
- [IRQ_USBINT] = 4,
- [IRQ_EMACINT] = 4,
- [14] = 7,
- [15] = 7,
- [IRQ_CCINT0] = 5, /* dma */
- [IRQ_CCERRINT] = 5, /* dma */
- [IRQ_TCERRINT0] = 5, /* dma */
- [IRQ_TCERRINT] = 5, /* dma */
- [IRQ_PSCIN] = 7,
- [21] = 7,
- [IRQ_IDE] = 4,
- [23] = 7,
- [IRQ_MBXINT] = 7,
- [IRQ_MBRINT] = 7,
- [IRQ_MMCINT] = 7,
- [IRQ_SDIOINT] = 7,
- [28] = 7,
- [IRQ_DDRINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_VLQINT] = 4,
- [IRQ_TINT0_TINT12] = 2, /* clockevent */
- [IRQ_TINT0_TINT34] = 2, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_PWMINT2] = 7,
- [IRQ_I2C] = 3,
- [IRQ_UARTINT0] = 3,
- [IRQ_UARTINT1] = 3,
- [IRQ_UARTINT2] = 3,
- [IRQ_SPINT0] = 3,
- [IRQ_SPINT1] = 3,
- [45] = 7,
- [IRQ_DSP2ARM0] = 4,
- [IRQ_DSP2ARM1] = 4,
- [IRQ_GPIO0] = 7,
- [IRQ_GPIO1] = 7,
- [IRQ_GPIO2] = 7,
- [IRQ_GPIO3] = 7,
- [IRQ_GPIO4] = 7,
- [IRQ_GPIO5] = 7,
- [IRQ_GPIO6] = 7,
- [IRQ_GPIO7] = 7,
- [IRQ_GPIOBNK0] = 7,
- [IRQ_GPIOBNK1] = 7,
- [IRQ_GPIOBNK2] = 7,
- [IRQ_GPIOBNK3] = 7,
- [IRQ_GPIOBNK4] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
-static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_DM646X_VP_VERTINT0] = 7,
- [IRQ_DM646X_VP_VERTINT1] = 7,
- [IRQ_DM646X_VP_VERTINT2] = 7,
- [IRQ_DM646X_VP_VERTINT3] = 7,
- [IRQ_DM646X_VP_ERRINT] = 7,
- [IRQ_DM646X_RESERVED_1] = 7,
- [IRQ_DM646X_RESERVED_2] = 7,
- [IRQ_DM646X_WDINT] = 7,
- [IRQ_DM646X_CRGENINT0] = 7,
- [IRQ_DM646X_CRGENINT1] = 7,
- [IRQ_DM646X_TSIFINT0] = 7,
- [IRQ_DM646X_TSIFINT1] = 7,
- [IRQ_DM646X_VDCEINT] = 7,
- [IRQ_DM646X_USBINT] = 7,
- [IRQ_DM646X_USBDMAINT] = 7,
- [IRQ_DM646X_PCIINT] = 7,
- [IRQ_CCINT0] = 7, /* dma */
- [IRQ_CCERRINT] = 7, /* dma */
- [IRQ_TCERRINT0] = 7, /* dma */
- [IRQ_TCERRINT] = 7, /* dma */
- [IRQ_DM646X_TCERRINT2] = 7,
- [IRQ_DM646X_TCERRINT3] = 7,
- [IRQ_DM646X_IDE] = 7,
- [IRQ_DM646X_HPIINT] = 7,
- [IRQ_DM646X_EMACRXTHINT] = 7,
- [IRQ_DM646X_EMACRXINT] = 7,
- [IRQ_DM646X_EMACTXINT] = 7,
- [IRQ_DM646X_EMACMISCINT] = 7,
- [IRQ_DM646X_MCASP0TXINT] = 7,
- [IRQ_DM646X_MCASP0RXINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_DM646X_RESERVED_3] = 7,
- [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
- [IRQ_TINT0_TINT34] = 7, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_DM646X_VLQINT] = 7,
- [IRQ_I2C] = 7,
- [IRQ_UARTINT0] = 7,
- [IRQ_UARTINT1] = 7,
- [IRQ_DM646X_UARTINT2] = 7,
- [IRQ_DM646X_SPINT0] = 7,
- [IRQ_DM646X_SPINT1] = 7,
- [IRQ_DM646X_DSP2ARMINT] = 7,
- [IRQ_DM646X_RESERVED_4] = 7,
- [IRQ_DM646X_PSCINT] = 7,
- [IRQ_DM646X_GPIO0] = 7,
- [IRQ_DM646X_GPIO1] = 7,
- [IRQ_DM646X_GPIO2] = 7,
- [IRQ_DM646X_GPIO3] = 7,
- [IRQ_DM646X_GPIO4] = 7,
- [IRQ_DM646X_GPIO5] = 7,
- [IRQ_DM646X_GPIO6] = 7,
- [IRQ_DM646X_GPIO7] = 7,
- [IRQ_DM646X_GPIOBNK0] = 7,
- [IRQ_DM646X_GPIOBNK1] = 7,
- [IRQ_DM646X_GPIOBNK2] = 7,
- [IRQ_DM646X_DDRINT] = 7,
- [IRQ_DM646X_AEMIFINT] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
-static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
- [IRQ_DM355_CCDC_VDINT0] = 2,
- [IRQ_DM355_CCDC_VDINT1] = 6,
- [IRQ_DM355_CCDC_VDINT2] = 6,
- [IRQ_DM355_IPIPE_HST] = 6,
- [IRQ_DM355_H3AINT] = 6,
- [IRQ_DM355_IPIPE_SDR] = 6,
- [IRQ_DM355_IPIPEIFINT] = 6,
- [IRQ_DM355_OSDINT] = 7,
- [IRQ_DM355_VENCINT] = 6,
- [IRQ_ASQINT] = 6,
- [IRQ_IMXINT] = 6,
- [IRQ_USBINT] = 4,
- [IRQ_DM355_RTOINT] = 4,
- [IRQ_DM355_UARTINT2] = 7,
- [IRQ_DM355_TINT6] = 7,
- [IRQ_CCINT0] = 5, /* dma */
- [IRQ_CCERRINT] = 5, /* dma */
- [IRQ_TCERRINT0] = 5, /* dma */
- [IRQ_TCERRINT] = 5, /* dma */
- [IRQ_DM355_SPINT2_1] = 7,
- [IRQ_DM355_TINT7] = 4,
- [IRQ_DM355_SDIOINT0] = 7,
- [IRQ_MBXINT] = 7,
- [IRQ_MBRINT] = 7,
- [IRQ_MMCINT] = 7,
- [IRQ_DM355_MMCINT1] = 7,
- [IRQ_DM355_PWMINT3] = 7,
- [IRQ_DDRINT] = 7,
- [IRQ_AEMIFINT] = 7,
- [IRQ_DM355_SDIOINT1] = 4,
- [IRQ_TINT0_TINT12] = 2, /* clockevent */
- [IRQ_TINT0_TINT34] = 2, /* clocksource */
- [IRQ_TINT1_TINT12] = 7, /* DSP timer */
- [IRQ_TINT1_TINT34] = 7, /* system tick */
- [IRQ_PWMINT0] = 7,
- [IRQ_PWMINT1] = 7,
- [IRQ_PWMINT2] = 7,
- [IRQ_I2C] = 3,
- [IRQ_UARTINT0] = 3,
- [IRQ_UARTINT1] = 3,
- [IRQ_DM355_SPINT0_0] = 3,
- [IRQ_DM355_SPINT0_1] = 3,
- [IRQ_DM355_GPIO0] = 3,
- [IRQ_DM355_GPIO1] = 7,
- [IRQ_DM355_GPIO2] = 4,
- [IRQ_DM355_GPIO3] = 4,
- [IRQ_DM355_GPIO4] = 7,
- [IRQ_DM355_GPIO5] = 7,
- [IRQ_DM355_GPIO6] = 7,
- [IRQ_DM355_GPIO7] = 7,
- [IRQ_DM355_GPIO8] = 7,
- [IRQ_DM355_GPIO9] = 7,
- [IRQ_DM355_GPIOBNK0] = 7,
- [IRQ_DM355_GPIOBNK1] = 7,
- [IRQ_DM355_GPIOBNK2] = 7,
- [IRQ_DM355_GPIOBNK3] = 7,
- [IRQ_DM355_GPIOBNK4] = 7,
- [IRQ_DM355_GPIOBNK5] = 7,
- [IRQ_DM355_GPIOBNK6] = 7,
- [IRQ_COMMTX] = 7,
- [IRQ_COMMRX] = 7,
- [IRQ_EMUINT] = 7,
-};
-
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
-
- if (cpu_is_davinci_dm644x())
- davinci_def_priorities = dm644x_default_priorities;
- else if (cpu_is_davinci_dm646x())
- davinci_def_priorities = dm646x_default_priorities;
- else if (cpu_is_davinci_dm355())
- davinci_def_priorities = dm355_default_priorities;
+ const u8 *davinci_def_priorities = davinci_soc_info.intc_irq_prios;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
#include <mach/hardware.h>
#include <mach/mux.h>
-
-static const struct mux_config *mux_table;
-static unsigned long pin_table_sz;
-
-int __init davinci_mux_register(const struct mux_config *pins,
- unsigned long size)
-{
- mux_table = pins;
- pin_table_sz = size;
-
- return 0;
-}
+#include <mach/common.h>
/*
* Sets the DAVINCI MUX register based on the table
int __init_or_module davinci_cfg_reg(const unsigned long index)
{
static DEFINE_SPINLOCK(mux_spin_lock);
- void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ void __iomem *base = soc_info->pinmux_base;
unsigned long flags;
const struct mux_config *cfg;
unsigned int reg_orig = 0, reg = 0;
unsigned int mask, warn = 0;
- if (!mux_table)
+ if (!soc_info->pinmux_pins)
BUG();
- if (index >= pin_table_sz) {
+ if (index >= soc_info->pinmux_pins_num) {
printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
- index, pin_table_sz);
+ index, soc_info->pinmux_pins_num);
dump_stack();
return -ENODEV;
}
- cfg = &mux_table[index];
+ cfg = &soc_info->pinmux_pins[index];
if (cfg->name == NULL) {
printk(KERN_ERR "No entry for the specified index\n");
#include <mach/psc.h>
#include <mach/mux.h>
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
-
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
#define MDSTAT_STATE_MASK 0x1f
/* Return nonzero iff the domain's clock is active */
-int __init davinci_psc_is_clk_active(unsigned int id)
+int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id)
{
- void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
- u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+ void __iomem *psc_base;
+ u32 mdstat;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+ pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+ (int)soc_info->psc_bases, ctlr);
+ return 0;
+ }
+
+ psc_base = soc_info->psc_bases[ctlr];
+ mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
/* if clocked, state can be "Enable" or "SyncReset" */
return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
-void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
+void davinci_psc_config(unsigned int domain, unsigned int ctlr,
+ unsigned int id, char enable)
{
u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
- void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ void __iomem *psc_base;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
+ if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) {
+ pr_warning("PSC: Bad psc data: 0x%x[%d]\n",
+ (int)soc_info->psc_bases, ctlr);
+ return;
+ }
+
+ psc_base = soc_info->psc_bases[ctlr];
+
mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
mdctl &= ~MDSTAT_STATE_MASK;
mdctl |= next_state;
#include <mach/serial.h>
#include <mach/irqs.h>
#include <mach/cputype.h>
+#include <mach/common.h>
+
#include "clock.h"
static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
__raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
-static struct plat_serial8250_port serial_platform_data[] = {
- {
- .mapbase = DAVINCI_UART0_BASE,
- .irq = IRQ_UARTINT0,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .mapbase = DAVINCI_UART1_BASE,
- .irq = IRQ_UARTINT1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .mapbase = DAVINCI_UART2_BASE,
- .irq = IRQ_UARTINT2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
- UPF_IOREMAP,
- .iotype = UPIO_MEM,
- .regshift = 2,
- },
- {
- .flags = 0
- },
-};
-
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
-
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
unsigned int pwremu = 0;
UART_DM646X_SCR_TX_WATERMARK);
}
-void __init davinci_serial_init(struct davinci_uart_config *info)
+int __init davinci_serial_init(struct davinci_uart_config *info)
{
int i;
char name[16];
struct clk *uart_clk;
- struct device *dev = &serial_device.dev;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct device *dev = &soc_info->serial_dev->dev;
+ struct plat_serial8250_port *p = dev->platform_data;
/*
* Make sure the serial ports are muxed on at this point.
- * You have to mux them off in device drivers later on
- * if not needed.
+ * You have to mux them off in device drivers later on if not needed.
*/
- for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
- struct plat_serial8250_port *p = serial_platform_data + i;
-
- if (!(info->enabled_uarts & (1 << i))) {
- p->flags = 0;
+ for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++, p++) {
+ if (!(info->enabled_uarts & (1 << i)))
continue;
- }
-
- if (cpu_is_davinci_dm646x())
- p->iotype = UPIO_MEM32;
-
- if (cpu_is_davinci_dm355()) {
- if (i == 2) {
- p->mapbase = (unsigned long)DM355_UART2_BASE;
- p->irq = IRQ_DM355_UARTINT2;
- }
- }
sprintf(name, "uart%d", i);
uart_clk = clk_get(dev, name);
davinci_serial_reset(p);
}
}
-}
-static int __init davinci_init(void)
-{
- return platform_device_register(&serial_device);
+ return platform_device_register(soc_info->serial_dev);
}
-
-arch_initcall(davinci_init);
--- /dev/null
+/*
+ * mach-davinci/sram.c - DaVinci simple SRAM allocator
+ *
+ * Copyright (C) 2009 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/genalloc.h>
+
+#include <mach/common.h>
+#include <mach/memory.h>
+#include <mach/sram.h>
+
+
+static struct gen_pool *sram_pool;
+
+void *sram_alloc(size_t len, dma_addr_t *dma)
+{
+ unsigned long vaddr;
+ dma_addr_t dma_base = davinci_soc_info.sram_dma;
+
+ if (dma)
+ *dma = 0;
+ if (!sram_pool || (dma && !dma_base))
+ return NULL;
+
+ vaddr = gen_pool_alloc(sram_pool, len);
+ if (!vaddr)
+ return NULL;
+
+ if (dma)
+ *dma = dma_base + (vaddr - SRAM_VIRT);
+ return (void *)vaddr;
+
+}
+EXPORT_SYMBOL(sram_alloc);
+
+void sram_free(void *addr, size_t len)
+{
+ gen_pool_free(sram_pool, (unsigned long) addr, len);
+}
+EXPORT_SYMBOL(sram_free);
+
+
+/*
+ * REVISIT This supports CPU and DMA access to/from SRAM, but it
+ * doesn't (yet?) support some other notable uses of SRAM: as TCM
+ * for data and/or instructions; and holding code needed to enter
+ * and exit suspend states (while DRAM can't be used).
+ */
+static int __init sram_init(void)
+{
+ unsigned len = davinci_soc_info.sram_len;
+ int status = 0;
+
+ if (len) {
+ len = min(len, SRAM_SIZE);
+ sram_pool = gen_pool_create(ilog2(SRAM_GRANULARITY), -1);
+ if (!sram_pool)
+ status = -ENOMEM;
+ }
+ if (sram_pool)
+ status = gen_pool_add(sram_pool, SRAM_VIRT, len, -1);
+ WARN_ON(status < 0);
+ return status;
+}
+core_initcall(sram_init);
+
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/device.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/errno.h>
#include <mach/io.h>
#include <mach/cputype.h>
+#include <mach/time.h>
#include "clock.h"
static struct clock_event_device clockevent_davinci;
static unsigned int davinci_clock_tick_rate;
-#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
-#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
-#define DAVINCI_WDOG_BASE (IO_PHYS + 0x21C00)
-
-enum {
- T0_BOT = 0, T0_TOP, T1_BOT, T1_TOP, NUM_TIMERS,
-};
-
-#define IS_TIMER1(id) (id & 0x2)
-#define IS_TIMER0(id) (!IS_TIMER1(id))
-#define IS_TIMER_TOP(id) ((id & 0x1))
-#define IS_TIMER_BOT(id) (!IS_TIMER_TOP(id))
-
-static int timer_irqs[NUM_TIMERS] = {
- IRQ_TINT0_TINT12,
- IRQ_TINT0_TINT34,
- IRQ_TINT1_TINT12,
- IRQ_TINT1_TINT34,
-};
-
/*
* This driver configures the 2 64-bit count-up timers as 4 independent
* 32-bit count-up timers used as follows:
- *
- * T0_BOT: Timer 0, bottom: clockevent source for hrtimers
- * T0_TOP: Timer 0, top : clocksource for generic timekeeping
- * T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
- * T1_TOP: Timer 1, top : <unused>
*/
-#define TID_CLOCKEVENT T0_BOT
-#define TID_CLOCKSOURCE T0_TOP
+
+enum {
+ TID_CLOCKEVENT,
+ TID_CLOCKSOURCE,
+};
/* Timer register offsets */
-#define PID12 0x0
-#define TIM12 0x10
-#define TIM34 0x14
-#define PRD12 0x18
-#define PRD34 0x1c
-#define TCR 0x20
-#define TGCR 0x24
-#define WDTCR 0x28
+#define PID12 0x0
+#define TIM12 0x10
+#define TIM34 0x14
+#define PRD12 0x18
+#define PRD34 0x1c
+#define TCR 0x20
+#define TGCR 0x24
+#define WDTCR 0x28
+
+/* Offsets of the 8 compare registers */
+#define CMP12_0 0x60
+#define CMP12_1 0x64
+#define CMP12_2 0x68
+#define CMP12_3 0x6c
+#define CMP12_4 0x70
+#define CMP12_5 0x74
+#define CMP12_6 0x78
+#define CMP12_7 0x7c
/* Timer register bitfields */
#define TCR_ENAMODE_DISABLE 0x0
unsigned int id;
unsigned long period;
unsigned long opts;
+ unsigned long flags;
void __iomem *base;
unsigned long tim_off;
unsigned long prd_off;
static struct timer_s timers[];
/* values for 'opts' field of struct timer_s */
-#define TIMER_OPTS_DISABLED 0x00
-#define TIMER_OPTS_ONESHOT 0x01
-#define TIMER_OPTS_PERIODIC 0x02
+#define TIMER_OPTS_DISABLED 0x01
+#define TIMER_OPTS_ONESHOT 0x02
+#define TIMER_OPTS_PERIODIC 0x04
+#define TIMER_OPTS_STATE_MASK 0x07
+
+#define TIMER_OPTS_USE_COMPARE 0x80000000
+#define USING_COMPARE(t) ((t)->opts & TIMER_OPTS_USE_COMPARE)
+
+static char *id_to_name[] = {
+ [T0_BOT] = "timer0_0",
+ [T0_TOP] = "timer0_1",
+ [T1_BOT] = "timer1_0",
+ [T1_TOP] = "timer1_1",
+};
static int timer32_config(struct timer_s *t)
{
- u32 tcr = __raw_readl(t->base + TCR);
-
- /* disable timer */
- tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
- __raw_writel(tcr, t->base + TCR);
-
- /* reset counter to zero, set new period */
- __raw_writel(0, t->base + t->tim_off);
- __raw_writel(t->period, t->base + t->prd_off);
-
- /* Set enable mode */
- if (t->opts & TIMER_OPTS_ONESHOT) {
- tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
- } else if (t->opts & TIMER_OPTS_PERIODIC) {
- tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+ u32 tcr;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+ if (USING_COMPARE(t)) {
+ struct davinci_timer_instance *dtip =
+ soc_info->timer_info->timers;
+ int event_timer = ID_TO_TIMER(timers[TID_CLOCKEVENT].id);
+
+ /*
+ * Next interrupt should be the current time reg value plus
+ * the new period (using 32-bit unsigned addition/wrapping
+ * to 0 on overflow). This assumes that the clocksource
+ * is setup to count to 2^32-1 before wrapping around to 0.
+ */
+ __raw_writel(__raw_readl(t->base + t->tim_off) + t->period,
+ t->base + dtip[event_timer].cmp_off);
+ } else {
+ tcr = __raw_readl(t->base + TCR);
+
+ /* disable timer */
+ tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
+ __raw_writel(tcr, t->base + TCR);
+
+ /* reset counter to zero, set new period */
+ __raw_writel(0, t->base + t->tim_off);
+ __raw_writel(t->period, t->base + t->prd_off);
+
+ /* Set enable mode */
+ if (t->opts & TIMER_OPTS_ONESHOT)
+ tcr |= TCR_ENAMODE_ONESHOT << t->enamode_shift;
+ else if (t->opts & TIMER_OPTS_PERIODIC)
+ tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
+
+ __raw_writel(tcr, t->base + TCR);
}
-
- __raw_writel(tcr, t->base + TCR);
return 0;
}
static void __init timer_init(void)
{
- u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ struct davinci_timer_instance *dtip = soc_info->timer_info->timers;
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
u32 tgcr;
- void __iomem *base = IO_ADDRESS(phys_bases[i]);
+ void __iomem *base = dtip[i].base;
/* Disabled, Internal clock source */
__raw_writel(0, base + TCR);
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
- u32 phys_base;
-
- if (t->name) {
- t->id = i;
- phys_base = (IS_TIMER1(t->id) ?
- DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
- t->base = IO_ADDRESS(phys_base);
-
- if (IS_TIMER_BOT(t->id)) {
- t->enamode_shift = 6;
- t->tim_off = TIM12;
- t->prd_off = PRD12;
- } else {
- t->enamode_shift = 22;
- t->tim_off = TIM34;
- t->prd_off = PRD34;
- }
-
- /* Register interrupt */
- t->irqaction.name = t->name;
- t->irqaction.dev_id = (void *)t;
- if (t->irqaction.handler != NULL) {
- setup_irq(timer_irqs[t->id], &t->irqaction);
- }
-
- timer32_config(&timers[i]);
+ int timer = ID_TO_TIMER(t->id);
+ u32 irq;
+
+ t->base = dtip[timer].base;
+
+ if (IS_TIMER_BOT(t->id)) {
+ t->enamode_shift = 6;
+ t->tim_off = TIM12;
+ t->prd_off = PRD12;
+ irq = dtip[timer].bottom_irq;
+ } else {
+ t->enamode_shift = 22;
+ t->tim_off = TIM34;
+ t->prd_off = PRD34;
+ irq = dtip[timer].top_irq;
+ }
+
+ /* Register interrupt */
+ t->irqaction.name = t->name;
+ t->irqaction.dev_id = (void *)t;
+
+ if (t->irqaction.handler != NULL) {
+ irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq;
+ setup_irq(irq, &t->irqaction);
}
+
+ timer32_config(&timers[i]);
}
}
}
static struct clocksource clocksource_davinci = {
- .name = "timer0_1",
.rating = 300,
.read = read_cycles,
.mask = CLOCKSOURCE_MASK(32),
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
t->period = davinci_clock_tick_rate / (HZ);
- t->opts = TIMER_OPTS_PERIODIC;
+ t->opts &= ~TIMER_OPTS_STATE_MASK;
+ t->opts |= TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
case CLOCK_EVT_MODE_ONESHOT:
- t->opts = TIMER_OPTS_ONESHOT;
+ t->opts &= ~TIMER_OPTS_STATE_MASK;
+ t->opts |= TIMER_OPTS_ONESHOT;
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
- t->opts = TIMER_OPTS_DISABLED;
+ t->opts &= ~TIMER_OPTS_STATE_MASK;
+ t->opts |= TIMER_OPTS_DISABLED;
break;
case CLOCK_EVT_MODE_RESUME:
break;
}
static struct clock_event_device clockevent_davinci = {
- .name = "timer0_0",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_next_event = davinci_set_next_event,
static void __init davinci_timer_init(void)
{
struct clk *timer_clk;
-
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ unsigned int clockevent_id;
+ unsigned int clocksource_id;
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
+ clockevent_id = soc_info->timer_info->clockevent_id;
+ clocksource_id = soc_info->timer_info->clocksource_id;
+
+ timers[TID_CLOCKEVENT].id = clockevent_id;
+ timers[TID_CLOCKSOURCE].id = clocksource_id;
+
+ /*
+ * If using same timer for both clock events & clocksource,
+ * a compare register must be used to generate an event interrupt.
+ * This is equivalent to a oneshot timer only (not periodic).
+ */
+ if (clockevent_id == clocksource_id) {
+ struct davinci_timer_instance *dtip =
+ soc_info->timer_info->timers;
+ int event_timer = ID_TO_TIMER(clockevent_id);
+
+ /* Only bottom timers can use compare regs */
+ if (IS_TIMER_TOP(clockevent_id))
+ pr_warning("davinci_timer_init: Invalid use"
+ " of system timers. Results unpredictable.\n");
+ else if ((dtip[event_timer].cmp_off == 0)
+ || (dtip[event_timer].cmp_irq == 0))
+ pr_warning("davinci_timer_init: Invalid timer instance"
+ " setup. Results unpredictable.\n");
+ else {
+ timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
+ clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
+ }
+ }
+
/* init timer hw */
timer_init();
davinci_clock_tick_rate = clk_get_rate(timer_clk);
/* setup clocksource */
+ clocksource_davinci.name = id_to_name[clocksource_id];
clocksource_davinci.mult =
clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
printk(err, clocksource_davinci.name);
/* setup clockevent */
+ clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
- clockevent_davinci.min_delta_ns =
- clockevent_delta2ns(1, &clockevent_davinci);
+ clockevent_davinci.min_delta_ns = 50000; /* 50 usec */
clockevent_davinci.cpumask = cpumask_of(0);
clockevents_register_device(&clockevent_davinci);
/* reset board using watchdog timer */
-void davinci_watchdog_reset(void) {
+void davinci_watchdog_reset(void)
+{
u32 tgcr, wdtcr;
- void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
- struct device dev;
+ struct davinci_soc_info *soc_info = &davinci_soc_info;
+ void __iomem *base = soc_info->wdt_base;
struct clk *wd_clk;
- char *name = "watchdog";
- dev_set_name(&dev, name);
- wd_clk = clk_get(&dev, NULL);
+ wd_clk = clk_get(&davinci_wdt_device.dev, NULL);
if (WARN_ON(IS_ERR(wd_clk)))
return;
clk_enable(wd_clk);
comment "EP93xx Platforms"
+choice
+ prompt "EP93xx first SDRAM bank selection"
+ default EP93XX_SDCE3_SYNC_PHYS_OFFSET
+
+config EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ bool "0x00000000 - SDCE3/SyncBoot"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0x00000000
+
+config EP93XX_SDCE0_PHYS_OFFSET
+ bool "0xc0000000 - SDCEO"
+ help
+ Select this option if you want support for EP93xx boards with the
+ first SDRAM bank at 0xc0000000
+
+endchoice
+
config MACH_ADSSPHERE
bool "Support ADS Sphere"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the ADS
Sphere board.
+config MACH_EDB93XX
+ bool
+
+config MACH_EDB9301
+ bool "Support Cirrus Logic EDB9301"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
+ help
+ Say 'Y' here if you want your kernel to support the Cirrus
+ Logic EDB9301 Evaluation Board.
+
config MACH_EDB9302
bool "Support Cirrus Logic EDB9302"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302 Evaluation Board.
config MACH_EDB9302A
bool "Support Cirrus Logic EDB9302A"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9302A Evaluation Board.
config MACH_EDB9307
bool "Support Cirrus Logic EDB9307"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307 Evaluation Board.
config MACH_EDB9307A
bool "Support Cirrus Logic EDB9307A"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9307A Evaluation Board.
config MACH_EDB9312
bool "Support Cirrus Logic EDB9312"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9312 Evaluation Board.
config MACH_EDB9315
bool "Support Cirrus Logic EDB9315"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315 Evaluation Board.
config MACH_EDB9315A
bool "Support Cirrus Logic EDB9315A"
+ depends on EP93XX_SDCE0_PHYS_OFFSET
+ select MACH_EDB93XX
help
Say 'Y' here if you want your kernel to support the Cirrus
Logic EDB9315A Evaluation Board.
config MACH_GESBC9312
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
bool "Support Glomation GESBC-9312-sx"
help
Say 'Y' here if you want your kernel to support the Glomation
GESBC-9312-sx board.
config MACH_MICRO9
- bool
- default n
+ bool
config MACH_MICRO9H
- bool "Support Contec Hypercontrol Micro9-H"
- select MACH_MICRO9
- help
- Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-H board.
+ bool "Support Contec Hypercontrol Micro9-H"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-H board.
config MACH_MICRO9M
- bool "Support Contec Hypercontrol Micro9-M"
- select MACH_MICRO9
- help
- Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-M board.
+ bool "Support Contec Hypercontrol Micro9-M"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-M board.
config MACH_MICRO9L
- bool "Support Contec Hypercontrol Micro9-L"
- select MACH_MICRO9
- help
- Say 'Y' here if you want your kernel to support the
- Contec Hypercontrol Micro9-L board.
+ bool "Support Contec Hypercontrol Micro9-L"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+ select MACH_MICRO9
+ help
+ Say 'Y' here if you want your kernel to support the
+ Contec Hypercontrol Micro9-L board.
config MACH_TS72XX
bool "Support Technologic Systems TS-72xx SBC"
+ depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
help
Say 'Y' here if you want your kernel to support the
Technologic Systems TS-72xx board.
obj- :=
obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o
-obj-$(CONFIG_MACH_EDB9302) += edb9302.o
-obj-$(CONFIG_MACH_EDB9302A) += edb9302a.o
-obj-$(CONFIG_MACH_EDB9307) += edb9307.o
-obj-$(CONFIG_MACH_EDB9307A) += edb9307a.o
-obj-$(CONFIG_MACH_EDB9312) += edb9312.o
-obj-$(CONFIG_MACH_EDB9315) += edb9315.o
-obj-$(CONFIG_MACH_EDB9315A) += edb9315a.o
+obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o
obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o
obj-$(CONFIG_MACH_MICRO9) += micro9.o
obj-$(CONFIG_MACH_TS72XX) += ts72xx.o
- zreladdr-y := 0x00008000
-params_phys-y := 0x00000100
+ zreladdr-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00008000
+params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET) := 0x00000100
+
+ zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0008000
+params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET) := 0xc0000100
static struct clk clk_p;
static struct clk clk_pll2;
static struct clk clk_usb_host = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = EP93XX_SYSCON_CLOCK_USH_EN,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_USH_EN,
};
/* DMA Clocks */
static struct clk clk_m2p0 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00020000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P0,
};
static struct clk clk_m2p1 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00010000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P1,
};
static struct clk clk_m2p2 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00080000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P2,
};
static struct clk clk_m2p3 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00040000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P3,
};
static struct clk clk_m2p4 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00200000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P4,
};
static struct clk clk_m2p5 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00100000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P5,
};
static struct clk clk_m2p6 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00800000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P6,
};
static struct clk clk_m2p7 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x00400000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P7,
};
static struct clk clk_m2p8 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x02000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P8,
};
static struct clk clk_m2p9 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x01000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2P9,
};
static struct clk clk_m2m0 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x04000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M0,
};
static struct clk clk_m2m1 = {
- .enable_reg = EP93XX_SYSCON_CLOCK_CONTROL,
- .enable_mask = 0x08000000,
+ .enable_reg = EP93XX_SYSCON_PWRCNT,
+ .enable_mask = EP93XX_SYSCON_PWRCNT_DMA_M2M1,
};
#define INIT_CK(dev,con,ck) \
INIT_CK(NULL, "hclk", &clk_h),
INIT_CK(NULL, "pclk", &clk_p),
INIT_CK(NULL, "pll2", &clk_pll2),
- INIT_CK(NULL, "usb_host", &clk_usb_host),
+ INIT_CK("ep93xx-ohci", NULL, &clk_usb_host),
INIT_CK(NULL, "m2p0", &clk_m2p0),
INIT_CK(NULL, "m2p1", &clk_m2p1),
INIT_CK(NULL, "m2p2", &clk_m2p2),
{
u32 value;
- value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
- if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+ value = __raw_readl(EP93XX_SYSCON_PWRCNT);
+ if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
return EP93XX_EXT_CLK_RATE;
else
return EP93XX_EXT_CLK_RATE / 2;
static unsigned char gpio_int_enabled[3];
static unsigned char gpio_int_type1[3];
static unsigned char gpio_int_type2[3];
-static unsigned char gpio_int_debouce[3];
+static unsigned char gpio_int_debounce[3];
/* Port ordering is: A B F */
static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
int port_mask = 1 << (line & 7);
if (enable)
- gpio_int_debouce[port] |= port_mask;
+ gpio_int_debounce[port] |= port_mask;
else
- gpio_int_debouce[port] &= ~port_mask;
+ gpio_int_debounce[port] &= ~port_mask;
- __raw_writeb(gpio_int_debouce[port],
+ __raw_writeb(gpio_int_debounce[port],
EP93XX_GPIO_REG(int_debounce_register_offset[port]));
}
EXPORT_SYMBOL(ep93xx_gpio_int_debounce);
{
int gpio_irq;
- vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK);
- vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK);
+ vic_init((void *)EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0);
+ vic_init((void *)EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0);
for (gpio_irq = gpio_to_irq(0);
gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
};
+static struct resource ep93xx_rtc_resource[] = {
+ {
+ .start = EP93XX_RTC_PHYS_BASE,
+ .end = EP93XX_RTC_PHYS_BASE + 0x10c - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
static struct platform_device ep93xx_rtc_device = {
- .name = "ep93xx-rtc",
- .id = -1,
- .num_resources = 0,
+ .name = "ep93xx-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(ep93xx_rtc_resource),
+ .resource = ep93xx_rtc_resource,
};
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/edb9302.c
- * Cirrus Logic EDB9302 support.
- *
- * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9302_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9302_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9302_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9302_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9302_flash);
-
- ep93xx_register_eth(&edb9302_eth_data, 1);
-}
-
-MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
- /* Maintainer: George Kashperko <george@chas.com.ua> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9302_init_machine,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/edb9302a.c
- * Cirrus Logic EDB9302A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9302a_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9302a_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9302a_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9302a_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9302a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9302a_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9302a_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9302a_flash);
-
- ep93xx_register_eth(&edb9302a_eth_data, 1);
-}
-
-MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9302a_init_machine,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/edb9307.c
- * Cirrus Logic EDB9307 support.
- *
- * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307_flash_data = {
- .width = 4,
-};
-
-static struct resource edb9307_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9307_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9307_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9307_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9307_flash);
-
- ep93xx_register_eth(&edb9307_eth_data, 1);
-}
-
-MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
- /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9307_init_machine,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/edb9307a.c
- * Cirrus Logic EDB9307A support.
- *
- * Copyright (C) 2008 H Hartley Sweeten <hsweeten@visionengravers.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9307a_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9307a_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9307a_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9307a_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9307a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9307a_eth_data = {
- .phy_id = 1,
-};
-
-static struct i2c_board_info __initdata edb9307a_i2c_data[] = {
- {
- /* On-board battery backed RTC */
- I2C_BOARD_INFO("isl1208", 0x6f),
- },
- /*
- * The I2C signals are also routed to the Expansion Connector (J4)
- */
-};
-
-static void __init edb9307a_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9307a_flash);
-
- ep93xx_register_eth(&edb9307a_eth_data, 1);
-
- ep93xx_init_i2c(edb9307a_i2c_data, ARRAY_SIZE(edb9307a_i2c_data));
-}
-
-MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
- /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9307a_init_machine,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/edb9312.c
- * Cirrus Logic EDB9312 support.
- *
- * Copyright (C) 2006 Infosys Technologies Limited
- * Toufeeq Hussain <toufeeq_hussain@infosys.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9312_flash_data = {
- .width = 4,
-};
-
-static struct resource edb9312_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9312_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9312_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9312_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9312_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9312_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9312_flash);
-
- ep93xx_register_eth(&edb9312_eth_data, 1);
-}
-
-MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
- /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9312_init_machine,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/edb9315.c
- * Cirrus Logic EDB9315 support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315_flash_data = {
- .width = 4,
-};
-
-static struct resource edb9315_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_32M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9315_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9315_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9315_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9315_flash);
-
- ep93xx_register_eth(&edb9315_eth_data, 1);
-}
-
-MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9315_init_machine,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-ep93xx/edb9315a.c
- * Cirrus Logic EDB9315A support.
- *
- * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mtd/physmap.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-static struct physmap_flash_data edb9315a_flash_data = {
- .width = 2,
-};
-
-static struct resource edb9315a_flash_resource = {
- .start = EP93XX_CS6_PHYS_BASE,
- .end = EP93XX_CS6_PHYS_BASE + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device edb9315a_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &edb9315a_flash_data,
- },
- .num_resources = 1,
- .resource = &edb9315a_flash_resource,
-};
-
-static struct ep93xx_eth_data edb9315a_eth_data = {
- .phy_id = 1,
-};
-
-static void __init edb9315a_init_machine(void)
-{
- ep93xx_init_devices();
- platform_device_register(&edb9315a_flash);
-
- ep93xx_register_eth(&edb9315a_eth_data, 1);
-}
-
-MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .phys_io = EP93XX_APB_PHYS_BASE,
- .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
- .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
- .map_io = ep93xx_map_io,
- .init_irq = ep93xx_init_irq,
- .timer = &ep93xx_timer,
- .init_machine = edb9315a_init_machine,
-MACHINE_END
--- /dev/null
+/*
+ * arch/arm/mach-ep93xx/edb93xx.c
+ * Cirrus Logic EDB93xx Development Board support.
+ *
+ * EDB93XX, EDB9301, EDB9307A
+ * Copyright (C) 2008-2009 H Hartley Sweeten <hsweeten@visionengravers.com>
+ *
+ * EDB9302
+ * Copyright (C) 2006 George Kashperko <george@chas.com.ua>
+ *
+ * EDB9302A, EDB9315, EDB9315A
+ * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
+ *
+ * EDB9307
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * EDB9312
+ * Copyright (C) 2006 Infosys Technologies Limited
+ * Toufeeq Hussain <toufeeq_hussain@infosys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+static struct physmap_flash_data edb93xx_flash_data;
+
+static struct resource edb93xx_flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device edb93xx_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &edb93xx_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &edb93xx_flash_resource,
+};
+
+static void __init __edb93xx_register_flash(unsigned int width,
+ resource_size_t start, resource_size_t size)
+{
+ edb93xx_flash_data.width = width;
+ edb93xx_flash_resource.start = start;
+ edb93xx_flash_resource.end = start + size - 1;
+
+ platform_device_register(&edb93xx_flash);
+}
+
+static void __init edb93xx_register_flash(void)
+{
+ if (machine_is_edb9307() || machine_is_edb9312() ||
+ machine_is_edb9315()) {
+ __edb93xx_register_flash(4, EP93XX_CS6_PHYS_BASE, SZ_32M);
+ } else {
+ __edb93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
+ }
+}
+
+static struct ep93xx_eth_data edb93xx_eth_data = {
+ .phy_id = 1,
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+ {
+ I2C_BOARD_INFO("isl1208", 0x6f),
+ },
+};
+
+static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+ {
+ I2C_BOARD_INFO("ds1337", 0x68),
+ },
+};
+
+static void __init edb93xx_register_i2c(void)
+{
+ if (machine_is_edb9302a() || machine_is_edb9307a() ||
+ machine_is_edb9315a()) {
+ ep93xx_register_i2c(edb93xxa_i2c_data,
+ ARRAY_SIZE(edb93xxa_i2c_data));
+ } else if (machine_is_edb9307() || machine_is_edb9312() ||
+ machine_is_edb9315()) {
+ ep93xx_register_i2c(edb93xx_i2c_data,
+ ARRAY_SIZE(edb93xx_i2c_data));
+ }
+}
+
+static void __init edb93xx_init_machine(void)
+{
+ ep93xx_init_devices();
+ edb93xx_register_flash();
+ ep93xx_register_eth(&edb93xx_eth_data, 1);
+ edb93xx_register_i2c();
+}
+
+
+#ifdef CONFIG_MACH_EDB9301
+MACHINE_START(EDB9301, "Cirrus Logic EDB9301 Evaluation Board")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302
+MACHINE_START(EDB9302, "Cirrus Logic EDB9302 Evaluation Board")
+ /* Maintainer: George Kashperko <george@chas.com.ua> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9302A
+MACHINE_START(EDB9302A, "Cirrus Logic EDB9302A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307
+MACHINE_START(EDB9307, "Cirrus Logic EDB9307 Evaluation Board")
+ /* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9307A
+MACHINE_START(EDB9307A, "Cirrus Logic EDB9307A Evaluation Board")
+ /* Maintainer: H Hartley Sweeten <hsweeten@visionengravers.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9312
+MACHINE_START(EDB9312, "Cirrus Logic EDB9312 Evaluation Board")
+ /* Maintainer: Toufeeq Hussain <toufeeq_hussain@infosys.com> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315
+MACHINE_START(EDB9315, "Cirrus Logic EDB9315 Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EDB9315A
+MACHINE_START(EDB9315A, "Cirrus Logic EDB9315A Evaluation Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
+ .phys_io = EP93XX_APB_PHYS_BASE,
+ .io_pg_offst = ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100,
+ .map_io = ep93xx_map_io,
+ .init_irq = ep93xx_init_irq,
+ .timer = &ep93xx_timer,
+ .init_machine = edb93xx_init_machine,
+MACHINE_END
+#endif
#define EP93XX_PWM_BASE (EP93XX_APB_VIRT_BASE + 0x00110000)
#define EP93XX_RTC_BASE (EP93XX_APB_VIRT_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE (EP93XX_APB_PHYS_BASE + 0x00120000)
#define EP93XX_SYSCON_BASE (EP93XX_APB_VIRT_BASE + 0x00130000)
#define EP93XX_SYSCON_REG(x) (EP93XX_SYSCON_BASE + (x))
#define EP93XX_SYSCON_POWER_STATE EP93XX_SYSCON_REG(0x00)
-#define EP93XX_SYSCON_CLOCK_CONTROL EP93XX_SYSCON_REG(0x04)
-#define EP93XX_SYSCON_CLOCK_UARTBAUD 0x20000000
-#define EP93XX_SYSCON_CLOCK_USH_EN 0x10000000
+#define EP93XX_SYSCON_PWRCNT EP93XX_SYSCON_REG(0x04)
+#define EP93XX_SYSCON_PWRCNT_FIR_EN (1<<31)
+#define EP93XX_SYSCON_PWRCNT_UARTBAUD (1<<29)
+#define EP93XX_SYSCON_PWRCNT_USH_EN (1<<28)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M1 (1<<27)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2M0 (1<<26)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P8 (1<<25)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P9 (1<<24)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P6 (1<<23)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P7 (1<<22)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P4 (1<<21)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P5 (1<<20)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P2 (1<<19)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P3 (1<<18)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P0 (1<<17)
+#define EP93XX_SYSCON_PWRCNT_DMA_M2P1 (1<<16)
#define EP93XX_SYSCON_HALT EP93XX_SYSCON_REG(0x08)
#define EP93XX_SYSCON_STANDBY EP93XX_SYSCON_REG(0x0c)
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#ifndef __ASM_ARCH_MEMORY_H
#define __ASM_ARCH_MEMORY_H
+#if defined(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)
#define PHYS_OFFSET UL(0x00000000)
+#elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
+#define PHYS_OFFSET UL(0xc0000000)
+#else
+#error "Kconfig bug: No EP93xx PHYS_OFFSET set"
+#endif
#endif
/*
* Memory Map definitions
*/
-/* FIXME: Does it really swap SRAM like this? */
#ifdef CONFIG_GEMINI_MEM_SWAP
# define GEMINI_DRAM_BASE 0x00000000
-# define GEMINI_SRAM_BASE 0x20000000
+# define GEMINI_SRAM_BASE 0x70000000
#else
# define GEMINI_SRAM_BASE 0x00000000
# define GEMINI_DRAM_BASE 0x10000000
+++ /dev/null
-menu "IMX Implementations"
- depends on ARCH_IMX
-
-config ARCH_MX1ADS
- bool "mx1ads"
- depends on ARCH_IMX
- select ISA
- help
- Say Y here if you are using the Motorola MX1ADS board
-
-endmenu
+++ /dev/null
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-y += irq.o time.o dma.o generic.o clock.o
-
-obj-$(CONFIG_CPU_FREQ_IMX) += cpufreq.o
-
-# Specific board support
-obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
-
-# Support for blinky lights
-led-y := leds.o
-
-obj-$(CONFIG_LEDS) += $(led-y)
-led-$(CONFIG_ARCH_MX1ADS) += leds-mx1ads.o
+++ /dev/null
- zreladdr-$(CONFIG_ARCH_MX1ADS) := 0x08008000
-
+++ /dev/null
-/*
- * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-/*
- * Very simple approach: We can't disable clocks, so we do
- * not need refcounting
- */
-
-struct clk {
- struct list_head node;
- const char *name;
- unsigned long (*get_rate)(void);
-};
-
-/*
- * get the system pll clock in Hz
- *
- * mfi + mfn / (mfd +1)
- * f = 2 * f_ref * --------------------
- * pd + 1
- */
-static unsigned long imx_decode_pll(unsigned int pll, u32 f_ref)
-{
- unsigned long long ll;
- unsigned long quot;
-
- u32 mfi = (pll >> 10) & 0xf;
- u32 mfn = pll & 0x3ff;
- u32 mfd = (pll >> 16) & 0x3ff;
- u32 pd = (pll >> 26) & 0xf;
-
- mfi = mfi <= 5 ? 5 : mfi;
-
- ll = 2 * (unsigned long long)f_ref *
- ((mfi << 16) + (mfn << 16) / (mfd + 1));
- quot = (pd + 1) * (1 << 16);
- ll += quot / 2;
- do_div(ll, quot);
- return (unsigned long)ll;
-}
-
-static unsigned long imx_get_system_clk(void)
-{
- u32 f_ref = (CSCR & CSCR_SYSTEM_SEL) ? 16000000 : (CLK32 * 512);
-
- return imx_decode_pll(SPCTL0, f_ref);
-}
-
-static unsigned long imx_get_mcu_clk(void)
-{
- return imx_decode_pll(MPCTL0, CLK32 * 512);
-}
-
-/*
- * get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long imx_get_perclk1(void)
-{
- return imx_get_system_clk() / (((PCDR) & 0xf)+1);
-}
-
-/*
- * get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long imx_get_perclk2(void)
-{
- return imx_get_system_clk() / (((PCDR>>4) & 0xf)+1);
-}
-
-/*
- * get peripheral clock 3 ( SSI )
- */
-static unsigned long imx_get_perclk3(void)
-{
- return imx_get_system_clk() / (((PCDR>>16) & 0x7f)+1);
-}
-
-/*
- * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long imx_get_hclk(void)
-{
- return imx_get_system_clk() / (((CSCR>>10) & 0xf)+1);
-}
-
-static struct clk clk_system_clk = {
- .name = "system_clk",
- .get_rate = imx_get_system_clk,
-};
-
-static struct clk clk_hclk = {
- .name = "hclk",
- .get_rate = imx_get_hclk,
-};
-
-static struct clk clk_mcu_clk = {
- .name = "mcu_clk",
- .get_rate = imx_get_mcu_clk,
-};
-
-static struct clk clk_perclk1 = {
- .name = "perclk1",
- .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_uart_clk = {
- .name = "uart_clk",
- .get_rate = imx_get_perclk1,
-};
-
-static struct clk clk_perclk2 = {
- .name = "perclk2",
- .get_rate = imx_get_perclk2,
-};
-
-static struct clk clk_perclk3 = {
- .name = "perclk3",
- .get_rate = imx_get_perclk3,
-};
-
-static struct clk *clks[] = {
- &clk_perclk1,
- &clk_perclk2,
- &clk_perclk3,
- &clk_system_clk,
- &clk_hclk,
- &clk_mcu_clk,
- &clk_uart_clk,
-};
-
-static LIST_HEAD(clocks);
-static DEFINE_MUTEX(clocks_mutex);
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
-
- mutex_lock(&clocks_mutex);
- list_for_each_entry(p, &clocks, node) {
- if (!strcmp(p->name, id)) {
- clk = p;
- goto found;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return clk->get_rate();
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-int imx_clocks_init(void)
-{
- int i;
-
- mutex_lock(&clocks_mutex);
- for (i = 0; i < ARRAY_SIZE(clks); i++)
- list_add(&clks[i]->node, &clocks);
- mutex_unlock(&clocks_mutex);
-
- return 0;
-}
-
+++ /dev/null
-/*
- * cpu.c: clock scaling for the iMX
- *
- * Copyright (C) 2000 2001, The Delft University of Technology
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- * Copyright (C) 2006 Inky Lung <ilung@cwlinux.com>
- * Copyright (C) 2006 Pavel Pisa, PiKRON <ppisa@pikron.com>
- *
- * Based on SA1100 version written by:
- * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
- * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-/*#define DEBUG*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/cpufreq.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <asm/system.h>
-
-#include <mach/hardware.h>
-
-#include "generic.h"
-
-#ifndef __val2mfld
-#define __val2mfld(mask,val) (((mask)&~((mask)<<1))*(val)&(mask))
-#endif
-#ifndef __mfld2val
-#define __mfld2val(mask,val) (((val)&(mask))/((mask)&~((mask)<<1)))
-#endif
-
-#define CR_920T_CLOCK_MODE 0xC0000000
-#define CR_920T_FASTBUS_MODE 0x00000000
-#define CR_920T_ASYNC_MODE 0xC0000000
-
-static u32 mpctl0_at_boot;
-static u32 bclk_div_at_boot;
-
-static struct clk *system_clk, *mcu_clk;
-
-static void imx_set_async_mode(void)
-{
- adjust_cr(CR_920T_CLOCK_MODE, CR_920T_ASYNC_MODE);
-}
-
-static void imx_set_fastbus_mode(void)
-{
- adjust_cr(CR_920T_CLOCK_MODE, CR_920T_FASTBUS_MODE);
-}
-
-static void imx_set_mpctl0(u32 mpctl0)
-{
- unsigned long flags;
-
- if (mpctl0 == 0) {
- local_irq_save(flags);
- CSCR &= ~CSCR_MPEN;
- local_irq_restore(flags);
- return;
- }
-
- local_irq_save(flags);
- MPCTL0 = mpctl0;
- CSCR |= CSCR_MPEN;
- local_irq_restore(flags);
-}
-
-/**
- * imx_compute_mpctl - compute new PLL parameters
- * @new_mpctl: pointer to location assigned by new PLL control register value
- * @cur_mpctl: current PLL control register parameters
- * @f_ref: reference source frequency Hz
- * @freq: required frequency in Hz
- * @relation: is one of %CPUFREQ_RELATION_L (supremum)
- * and %CPUFREQ_RELATION_H (infimum)
- */
-long imx_compute_mpctl(u32 *new_mpctl, u32 cur_mpctl, u32 f_ref, unsigned long freq, int relation)
-{
- u32 mfi;
- u32 mfn;
- u32 mfd;
- u32 pd;
- unsigned long long ll;
- long l;
- long quot;
-
- /* Fdppl=2*Fref*(MFI+MFN/(MFD+1))/(PD+1) */
- /* PD=<0,15>, MFD=<1,1023>, MFI=<5,15> MFN=<0,1022> */
-
- if (cur_mpctl) {
- mfd = ((cur_mpctl >> 16) & 0x3ff) + 1;
- pd = ((cur_mpctl >> 26) & 0xf) + 1;
- } else {
- pd=2; mfd=313;
- }
-
- /* pd=2; mfd=313; mfi=8; mfn=183; */
- /* (MFI+MFN/(MFD)) = Fdppl / (2*Fref) * (PD); */
-
- quot = (f_ref + (1 << 9)) >> 10;
- l = (freq * pd + quot) / (2 * quot);
- mfi = l >> 10;
- mfn = ((l & ((1 << 10) - 1)) * mfd + (1 << 9)) >> 10;
-
- mfd -= 1;
- pd -= 1;
-
- *new_mpctl = ((mfi & 0xf) << 10) | (mfn & 0x3ff) | ((mfd & 0x3ff) << 16)
- | ((pd & 0xf) << 26);
-
- ll = 2 * (unsigned long long)f_ref * ( (mfi<<16) + (mfn<<16) / (mfd+1) );
- quot = (pd+1) * (1<<16);
- ll += quot / 2;
- do_div(ll, quot);
- freq = ll;
-
- pr_debug(KERN_DEBUG "imx: new PLL parameters pd=%d mfd=%d mfi=%d mfn=%d, freq=%ld\n",
- pd, mfd, mfi, mfn, freq);
-
- return freq;
-}
-
-
-static int imx_verify_speed(struct cpufreq_policy *policy)
-{
- if (policy->cpu != 0)
- return -EINVAL;
-
- cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq, policy->cpuinfo.max_freq);
-
- return 0;
-}
-
-static unsigned int imx_get_speed(unsigned int cpu)
-{
- unsigned int freq;
- unsigned int cr;
- unsigned int cscr;
- unsigned int bclk_div;
-
- if (cpu)
- return 0;
-
- cscr = CSCR;
- bclk_div = __mfld2val(CSCR_BCLK_DIV, cscr) + 1;
- cr = get_cr();
-
- if((cr & CR_920T_CLOCK_MODE) == CR_920T_FASTBUS_MODE) {
- freq = clk_get_rate(system_clk);
- freq = (freq + bclk_div/2) / bclk_div;
- } else {
- freq = clk_get_rate(mcu_clk);
- if (cscr & CSCR_MPU_PRESC)
- freq /= 2;
- }
-
- freq = (freq + 500) / 1000;
-
- return freq;
-}
-
-static int imx_set_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_freqs freqs;
- u32 mpctl0 = 0;
- u32 cscr;
- unsigned long flags;
- long freq;
- long sysclk;
- unsigned int bclk_div = bclk_div_at_boot;
-
- /*
- * Some governors do not respects CPU and policy lower limits
- * which leads to bad things (division by zero etc), ensure
- * that such things do not happen.
- */
- if(target_freq < policy->cpuinfo.min_freq)
- target_freq = policy->cpuinfo.min_freq;
-
- if(target_freq < policy->min)
- target_freq = policy->min;
-
- freq = target_freq * 1000;
-
- pr_debug(KERN_DEBUG "imx: requested frequency %ld Hz, mpctl0 at boot 0x%08x\n",
- freq, mpctl0_at_boot);
-
- sysclk = clk_get_rate(system_clk);
-
- if (freq > sysclk / bclk_div_at_boot + 1000000) {
- freq = imx_compute_mpctl(&mpctl0, mpctl0_at_boot, CLK32 * 512, freq, relation);
- if (freq < 0) {
- printk(KERN_WARNING "imx: target frequency %ld Hz cannot be set\n", freq);
- return -EINVAL;
- }
- } else {
- if(freq + 1000 < sysclk) {
- if (relation == CPUFREQ_RELATION_L)
- bclk_div = (sysclk - 1000) / freq;
- else
- bclk_div = (sysclk + freq + 1000) / freq;
-
- if(bclk_div > 16)
- bclk_div = 16;
- if(bclk_div < bclk_div_at_boot)
- bclk_div = bclk_div_at_boot;
- }
- freq = (sysclk + bclk_div / 2) / bclk_div;
- }
-
- freqs.old = imx_get_speed(0);
- freqs.new = (freq + 500) / 1000;
- freqs.cpu = 0;
- freqs.flags = 0;
-
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- local_irq_save(flags);
-
- imx_set_fastbus_mode();
-
- imx_set_mpctl0(mpctl0);
-
- cscr = CSCR;
- cscr &= ~CSCR_BCLK_DIV;
- cscr |= __val2mfld(CSCR_BCLK_DIV, bclk_div - 1);
- CSCR = cscr;
-
- if(mpctl0) {
- CSCR |= CSCR_MPLL_RESTART;
-
- /* Wait until MPLL is stabilized */
- while( CSCR & CSCR_MPLL_RESTART );
-
- imx_set_async_mode();
- }
-
- local_irq_restore(flags);
-
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- pr_debug(KERN_INFO "imx: set frequency %ld Hz, running from %s\n",
- freq, mpctl0? "MPLL": "SPLL");
-
- return 0;
-}
-
-static int __init imx_cpufreq_driver_init(struct cpufreq_policy *policy)
-{
- printk(KERN_INFO "i.MX cpu freq change driver v1.0\n");
-
- if (policy->cpu != 0)
- return -EINVAL;
-
- policy->cur = policy->min = policy->max = imx_get_speed(0);
- policy->cpuinfo.min_freq = 8000;
- policy->cpuinfo.max_freq = 200000;
- /* Manual states, that PLL stabilizes in two CLK32 periods */
- policy->cpuinfo.transition_latency = 4 * 1000000000LL / CLK32;
- return 0;
-}
-
-static struct cpufreq_driver imx_driver = {
- .flags = CPUFREQ_STICKY,
- .verify = imx_verify_speed,
- .target = imx_set_target,
- .get = imx_get_speed,
- .init = imx_cpufreq_driver_init,
- .name = "imx",
-};
-
-static int __init imx_cpufreq_init(void)
-{
- bclk_div_at_boot = __mfld2val(CSCR_BCLK_DIV, CSCR) + 1;
- mpctl0_at_boot = 0;
-
- system_clk = clk_get(NULL, "system_clk");
- if (IS_ERR(system_clk))
- return PTR_ERR(system_clk);
-
- mcu_clk = clk_get(NULL, "mcu_clk");
- if (IS_ERR(mcu_clk)) {
- clk_put(system_clk);
- return PTR_ERR(mcu_clk);
- }
-
- if((CSCR & CSCR_MPEN) &&
- ((get_cr() & CR_920T_CLOCK_MODE) != CR_920T_FASTBUS_MODE))
- mpctl0_at_boot = MPCTL0;
-
- return cpufreq_register_driver(&imx_driver);
-}
-
-arch_initcall(imx_cpufreq_init);
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/dma.c
- *
- * imx DMA registration and IRQ dispatching
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * 2004-03-03 Sascha Hauer <sascha@saschahauer.de>
- * initial version heavily inspired by
- * linux/arch/arm/mach-pxa/dma.c
- *
- * 2005-04-17 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Changed to support scatter gather DMA
- * by taking Russell's code from RiscPC
- *
- * 2006-05-31 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- * Corrected error handling code.
- *
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/errno.h>
-
-#include <asm/scatterlist.h>
-#include <asm/system.h>
-#include <asm/irq.h>
-#include <mach/hardware.h>
-#include <mach/dma.h>
-#include <mach/imx-dma.h>
-
-struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-/*
- * imx_dma_sg_next - prepare next chunk for scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @lastcount: number of bytes transferred during last transfer
- *
- * Functions prepares DMA controller for next sg data chunk transfer.
- * The @lastcount argument informs function about number of bytes transferred
- * during last block. Zero value can be used for @lastcount to setup DMA
- * for the first chunk.
- */
-static inline int imx_dma_sg_next(imx_dmach_t dma_ch, unsigned int lastcount)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned int nextcount;
- unsigned int nextaddr;
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return 0;
- }
-
- imxdma->resbytes -= lastcount;
-
- if (!imxdma->sg) {
- pr_debug("imxdma%d: no sg data\n", dma_ch);
- return 0;
- }
-
- imxdma->sgbc += lastcount;
- if ((imxdma->sgbc >= imxdma->sg->length) || !imxdma->resbytes) {
- if ((imxdma->sgcount <= 1) || !imxdma->resbytes) {
- pr_debug("imxdma%d: sg transfer limit reached\n",
- dma_ch);
- imxdma->sgcount=0;
- imxdma->sg = NULL;
- return 0;
- } else {
- imxdma->sgcount--;
- imxdma->sg++;
- imxdma->sgbc = 0;
- }
- }
- nextcount = imxdma->sg->length - imxdma->sgbc;
- nextaddr = imxdma->sg->dma_address + imxdma->sgbc;
-
- if(imxdma->resbytes < nextcount)
- nextcount = imxdma->resbytes;
-
- if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
- DAR(dma_ch) = nextaddr;
- else
- SAR(dma_ch) = nextaddr;
-
- CNTR(dma_ch) = nextcount;
- pr_debug("imxdma%d: next sg chunk dst 0x%08x, src 0x%08x, size 0x%08x\n",
- dma_ch, DAR(dma_ch), SAR(dma_ch), CNTR(dma_ch));
-
- return nextcount;
-}
-
-/*
- * imx_dma_setup_sg_base - scatter-gather DMA emulation
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- *
- * Functions sets up i.MX DMA state for emulated scatter-gather transfer
- * and sets up channel registers to be ready for the first chunk
- */
-static int
-imx_dma_setup_sg_base(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = sg;
- imxdma->sgcount = sgcount;
- imxdma->sgbc = 0;
- return imx_dma_sg_next(dma_ch, 0);
-}
-
-/**
- * imx_dma_setup_single - setup i.MX DMA channel for linear memory to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @dma_address: the DMA/physical memory address of the linear data block
- * to transfer
- * @dma_length: length of the data block in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- * or %DMA_MODE_WRITE from memory to the device
- *
- * The function setups DMA channel source and destination addresses for transfer
- * specified by provided parameters. The scatter-gather emulation is disabled,
- * because linear data block
- * form the physical address range is transferred.
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
- unsigned int dma_length, unsigned int dev_addr,
- unsigned int dmamode)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = NULL;
- imxdma->sgcount = 0;
- imxdma->dma_mode = dmamode;
- imxdma->resbytes = dma_length;
-
- if (!dma_address) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single null address\n",
- dma_ch);
- return -EINVAL;
- }
-
- if (!dma_length) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single zero length\n",
- dma_ch);
- return -EINVAL;
- }
-
- if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
- pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for read\n",
- dma_ch, (unsigned int)dma_address, dma_length,
- dev_addr);
- SAR(dma_ch) = dev_addr;
- DAR(dma_ch) = (unsigned int)dma_address;
- } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
- pr_debug("imxdma%d: mx_dma_setup_single2dev dma_addressg=0x%08x dma_length=%d dev_addr=0x%08x for write\n",
- dma_ch, (unsigned int)dma_address, dma_length,
- dev_addr);
- SAR(dma_ch) = (unsigned int)dma_address;
- DAR(dma_ch) = dev_addr;
- } else {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_single bad dmamode\n",
- dma_ch);
- return -EINVAL;
- }
-
- CNTR(dma_ch) = dma_length;
-
- return 0;
-}
-
-/**
- * imx_dma_setup_sg - setup i.MX DMA channel SG list to/from device transfer
- * @dma_ch: i.MX DMA channel number
- * @sg: pointer to the scatter-gather list/vector
- * @sgcount: scatter-gather list hungs count
- * @dma_length: total length of the transfer request in bytes
- * @dev_addr: physical device port address
- * @dmamode: DMA transfer mode, %DMA_MODE_READ from the device to the memory
- * or %DMA_MODE_WRITE from memory to the device
- *
- * The function sets up DMA channel state and registers to be ready for transfer
- * specified by provided parameters. The scatter-gather emulation is set up
- * according to the parameters.
- *
- * The full preparation of the transfer requires setup of more register
- * by the caller before imx_dma_enable() can be called.
- *
- * %BLR(dma_ch) holds transfer burst length in bytes, 0 means 64 bytes
- *
- * %RSSR(dma_ch) has to be set to the DMA request line source %DMA_REQ_xxx
- *
- * %CCR(dma_ch) has to specify transfer parameters, the next settings is typical
- * for linear or simple scatter-gather transfers if %DMA_MODE_READ is specified
- *
- * %CCR_DMOD_LINEAR | %CCR_DSIZ_32 | %CCR_SMOD_FIFO | %CCR_SSIZ_x
- *
- * The typical setup for %DMA_MODE_WRITE is specified by next options combination
- *
- * %CCR_SMOD_LINEAR | %CCR_SSIZ_32 | %CCR_DMOD_FIFO | %CCR_DSIZ_x
- *
- * Be careful here and do not mistakenly mix source and target device
- * port sizes constants, they are really different:
- * %CCR_SSIZ_8, %CCR_SSIZ_16, %CCR_SSIZ_32,
- * %CCR_DSIZ_8, %CCR_DSIZ_16, %CCR_DSIZ_32
- *
- * Return value: if incorrect parameters are provided -%EINVAL.
- * Zero indicates success.
- */
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, unsigned int dmamode)
-{
- int res;
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- imxdma->sg = NULL;
- imxdma->sgcount = 0;
- imxdma->dma_mode = dmamode;
- imxdma->resbytes = dma_length;
-
- if (!sg || !sgcount) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg epty sg list\n",
- dma_ch);
- return -EINVAL;
- }
-
- if (!sg->length) {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg zero length\n",
- dma_ch);
- return -EINVAL;
- }
-
- if ((dmamode & DMA_MODE_MASK) == DMA_MODE_READ) {
- pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for read\n",
- dma_ch, sg, sgcount, dma_length, dev_addr);
- SAR(dma_ch) = dev_addr;
- } else if ((dmamode & DMA_MODE_MASK) == DMA_MODE_WRITE) {
- pr_debug("imxdma%d: mx_dma_setup_sg2dev sg=%p sgcount=%d total length=%d dev_addr=0x%08x for write\n",
- dma_ch, sg, sgcount, dma_length, dev_addr);
- DAR(dma_ch) = dev_addr;
- } else {
- printk(KERN_ERR "imxdma%d: imx_dma_setup_sg bad dmamode\n",
- dma_ch);
- return -EINVAL;
- }
-
- res = imx_dma_setup_sg_base(dma_ch, sg, sgcount);
- if (res <= 0) {
- printk(KERN_ERR "imxdma%d: no sg chunk ready\n", dma_ch);
- return -EINVAL;
- }
-
- return 0;
-}
-
-/**
- * imx_dma_setup_handlers - setup i.MX DMA channel end and error notification handlers
- * @dma_ch: i.MX DMA channel number
- * @irq_handler: the pointer to the function called if the transfer
- * ends successfully
- * @err_handler: the pointer to the function called if the premature
- * end caused by error occurs
- * @data: user specified value to be passed to the handlers
- */
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
- void (*irq_handler) (int, void *),
- void (*err_handler) (int, void *, int),
- void *data)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return -ENODEV;
- }
-
- local_irq_save(flags);
- DISR = (1 << dma_ch);
- imxdma->irq_handler = irq_handler;
- imxdma->err_handler = err_handler;
- imxdma->data = data;
- local_irq_restore(flags);
- return 0;
-}
-
-/**
- * imx_dma_enable - function to start i.MX DMA channel operation
- * @dma_ch: i.MX DMA channel number
- *
- * The channel has to be allocated by driver through imx_dma_request()
- * or imx_dma_request_by_prio() function.
- * The transfer parameters has to be set to the channel registers through
- * call of the imx_dma_setup_single() or imx_dma_setup_sg() function
- * and registers %BLR(dma_ch), %RSSR(dma_ch) and %CCR(dma_ch) has to
- * be set prior this function call by the channel user.
- */
-void imx_dma_enable(imx_dmach_t dma_ch)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- pr_debug("imxdma%d: imx_dma_enable\n", dma_ch);
-
- if (!imxdma->name) {
- printk(KERN_CRIT "%s: called for not allocated channel %d\n",
- __func__, dma_ch);
- return;
- }
-
- local_irq_save(flags);
- DISR = (1 << dma_ch);
- DIMR &= ~(1 << dma_ch);
- CCR(dma_ch) |= CCR_CEN;
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_disable - stop, finish i.MX DMA channel operatin
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_disable(imx_dmach_t dma_ch)
-{
- unsigned long flags;
-
- pr_debug("imxdma%d: imx_dma_disable\n", dma_ch);
-
- local_irq_save(flags);
- DIMR |= (1 << dma_ch);
- CCR(dma_ch) &= ~CCR_CEN;
- DISR = (1 << dma_ch);
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request - request/allocate specified channel number
- * @dma_ch: i.MX DMA channel number
- * @name: the driver/caller own non-%NULL identification
- */
-int imx_dma_request(imx_dmach_t dma_ch, const char *name)
-{
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
- unsigned long flags;
-
- /* basic sanity checks */
- if (!name)
- return -EINVAL;
-
- if (dma_ch >= IMX_DMA_CHANNELS) {
- printk(KERN_CRIT "%s: called for non-existed channel %d\n",
- __func__, dma_ch);
- return -EINVAL;
- }
-
- local_irq_save(flags);
- if (imxdma->name) {
- local_irq_restore(flags);
- return -ENODEV;
- }
-
- imxdma->name = name;
- imxdma->irq_handler = NULL;
- imxdma->err_handler = NULL;
- imxdma->data = NULL;
- imxdma->sg = NULL;
- local_irq_restore(flags);
- return 0;
-}
-
-/**
- * imx_dma_free - release previously acquired channel
- * @dma_ch: i.MX DMA channel number
- */
-void imx_dma_free(imx_dmach_t dma_ch)
-{
- unsigned long flags;
- struct imx_dma_channel *imxdma = &imx_dma_channels[dma_ch];
-
- if (!imxdma->name) {
- printk(KERN_CRIT
- "%s: trying to free channel %d which is already freed\n",
- __func__, dma_ch);
- return;
- }
-
- local_irq_save(flags);
- /* Disable interrupts */
- DIMR |= (1 << dma_ch);
- CCR(dma_ch) &= ~CCR_CEN;
- imxdma->name = NULL;
- local_irq_restore(flags);
-}
-
-/**
- * imx_dma_request_by_prio - find and request some of free channels best suiting requested priority
- * @name: the driver/caller own non-%NULL identification
- * @prio: one of the hardware distinguished priority level:
- * %DMA_PRIO_HIGH, %DMA_PRIO_MEDIUM, %DMA_PRIO_LOW
- *
- * This function tries to find free channel in the specified priority group
- * if the priority cannot be achieved it tries to look for free channel
- * in the higher and then even lower priority groups.
- *
- * Return value: If there is no free channel to allocate, -%ENODEV is returned.
- * On successful allocation channel is returned.
- */
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio)
-{
- int i;
- int best;
-
- switch (prio) {
- case (DMA_PRIO_HIGH):
- best = 8;
- break;
- case (DMA_PRIO_MEDIUM):
- best = 4;
- break;
- case (DMA_PRIO_LOW):
- default:
- best = 0;
- break;
- }
-
- for (i = best; i < IMX_DMA_CHANNELS; i++) {
- if (!imx_dma_request(i, name)) {
- return i;
- }
- }
-
- for (i = best - 1; i >= 0; i--) {
- if (!imx_dma_request(i, name)) {
- return i;
- }
- }
-
- printk(KERN_ERR "%s: no free DMA channel found\n", __func__);
-
- return -ENODEV;
-}
-
-static irqreturn_t dma_err_handler(int irq, void *dev_id)
-{
- int i, disr = DISR;
- struct imx_dma_channel *channel;
- unsigned int err_mask = DBTOSR | DRTOSR | DSESR | DBOSR;
- int errcode;
-
- DISR = disr & err_mask;
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- if(!(err_mask & (1 << i)))
- continue;
- channel = &imx_dma_channels[i];
- errcode = 0;
-
- if (DBTOSR & (1 << i)) {
- DBTOSR = (1 << i);
- errcode |= IMX_DMA_ERR_BURST;
- }
- if (DRTOSR & (1 << i)) {
- DRTOSR = (1 << i);
- errcode |= IMX_DMA_ERR_REQUEST;
- }
- if (DSESR & (1 << i)) {
- DSESR = (1 << i);
- errcode |= IMX_DMA_ERR_TRANSFER;
- }
- if (DBOSR & (1 << i)) {
- DBOSR = (1 << i);
- errcode |= IMX_DMA_ERR_BUFFER;
- }
-
- /*
- * The cleaning of @sg field would be questionable
- * there, because its value can help to compute
- * remaining/transferred bytes count in the handler
- */
- /*imx_dma_channels[i].sg = NULL;*/
-
- if (channel->name && channel->err_handler) {
- channel->err_handler(i, channel->data, errcode);
- continue;
- }
-
- imx_dma_channels[i].sg = NULL;
-
- printk(KERN_WARNING
- "DMA timeout on channel %d (%s) -%s%s%s%s\n",
- i, channel->name,
- errcode&IMX_DMA_ERR_BURST? " burst":"",
- errcode&IMX_DMA_ERR_REQUEST? " request":"",
- errcode&IMX_DMA_ERR_TRANSFER? " transfer":"",
- errcode&IMX_DMA_ERR_BUFFER? " buffer":"");
- }
- return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_irq_handler(int irq, void *dev_id)
-{
- int i, disr = DISR;
-
- pr_debug("imxdma: dma_irq_handler called, disr=0x%08x\n",
- disr);
-
- DISR = disr;
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- if (disr & (1 << i)) {
- struct imx_dma_channel *channel = &imx_dma_channels[i];
- if (channel->name) {
- if (imx_dma_sg_next(i, CNTR(i))) {
- CCR(i) &= ~CCR_CEN;
- mb();
- CCR(i) |= CCR_CEN;
- } else {
- if (channel->irq_handler)
- channel->irq_handler(i,
- channel->data);
- }
- } else {
- /*
- * IRQ for an unregistered DMA channel:
- * let's clear the interrupts and disable it.
- */
- printk(KERN_WARNING
- "spurious IRQ for DMA channel %d\n", i);
- }
- }
- }
- return IRQ_HANDLED;
-}
-
-static int __init imx_dma_init(void)
-{
- int ret;
- int i;
-
- /* reset DMA module */
- DCR = DCR_DRST;
-
- ret = request_irq(DMA_INT, dma_irq_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register IRQ for DMA\n");
- return ret;
- }
-
- ret = request_irq(DMA_ERR, dma_err_handler, 0, "DMA", NULL);
- if (ret) {
- printk(KERN_CRIT "Wow! Can't register ERRIRQ for DMA\n");
- free_irq(DMA_INT, NULL);
- }
-
- /* enable DMA module */
- DCR = DCR_DEN;
-
- /* clear all interrupts */
- DISR = (1 << IMX_DMA_CHANNELS) - 1;
-
- /* enable interrupts */
- DIMR = (1 << IMX_DMA_CHANNELS) - 1;
-
- for (i = 0; i < IMX_DMA_CHANNELS; i++) {
- imx_dma_channels[i].sg = NULL;
- imx_dma_channels[i].dma_num = i;
- }
-
- return ret;
-}
-
-arch_initcall(imx_dma_init);
-
-EXPORT_SYMBOL(imx_dma_setup_single);
-EXPORT_SYMBOL(imx_dma_setup_sg);
-EXPORT_SYMBOL(imx_dma_setup_handlers);
-EXPORT_SYMBOL(imx_dma_enable);
-EXPORT_SYMBOL(imx_dma_disable);
-EXPORT_SYMBOL(imx_dma_request);
-EXPORT_SYMBOL(imx_dma_free);
-EXPORT_SYMBOL(imx_dma_request_by_prio);
-EXPORT_SYMBOL(imx_dma_channels);
+++ /dev/null
-/*
- * arch/arm/mach-imx/generic.c
- *
- * author: Sascha Hauer
- * Created: april 20th, 2004
- * Copyright: Synertronixx GmbH
- *
- * Common code for i.MX machines
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-#include <asm/errno.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#include <asm/mach/map.h>
-#include <mach/mmc.h>
-#include <mach/gpio.h>
-
-unsigned long imx_gpio_alloc_map[(GPIO_PORT_MAX + 1) * 32 / BITS_PER_LONG];
-
-void imx_gpio_mode(int gpio_mode)
-{
- unsigned int pin = gpio_mode & GPIO_PIN_MASK;
- unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT;
- unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT;
- unsigned int tmp;
-
- /* Pullup enable */
- if(gpio_mode & GPIO_PUEN)
- PUEN(port) |= (1<<pin);
- else
- PUEN(port) &= ~(1<<pin);
-
- /* Data direction */
- if(gpio_mode & GPIO_OUT)
- DDIR(port) |= 1<<pin;
- else
- DDIR(port) &= ~(1<<pin);
-
- /* Primary / alternate function */
- if(gpio_mode & GPIO_AF)
- GPR(port) |= (1<<pin);
- else
- GPR(port) &= ~(1<<pin);
-
- /* use as gpio? */
- if(gpio_mode & GPIO_GIUS)
- GIUS(port) |= (1<<pin);
- else
- GIUS(port) &= ~(1<<pin);
-
- /* Output / input configuration */
- /* FIXME: I'm not very sure about OCR and ICONF, someone
- * should have a look over it
- */
- if(pin<16) {
- tmp = OCR1(port);
- tmp &= ~( 3<<(pin*2));
- tmp |= (ocr << (pin*2));
- OCR1(port) = tmp;
-
- ICONFA1(port) &= ~( 3<<(pin*2));
- ICONFA1(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << (pin * 2);
- ICONFB1(port) &= ~( 3<<(pin*2));
- ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2);
- } else {
- tmp = OCR2(port);
- tmp &= ~( 3<<((pin-16)*2));
- tmp |= (ocr << ((pin-16)*2));
- OCR2(port) = tmp;
-
- ICONFA2(port) &= ~( 3<<((pin-16)*2));
- ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2);
- ICONFB2(port) &= ~( 3<<((pin-16)*2));
- ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2);
- }
-}
-
-EXPORT_SYMBOL(imx_gpio_mode);
-
-int imx_gpio_request(unsigned gpio, const char *label)
-{
- if(gpio >= (GPIO_PORT_MAX + 1) * 32) {
- printk(KERN_ERR "imx_gpio: Attempt to request nonexistent GPIO %d for \"%s\"\n",
- gpio, label ? label : "?");
- return -EINVAL;
- }
-
- if(test_and_set_bit(gpio, imx_gpio_alloc_map)) {
- printk(KERN_ERR "imx_gpio: GPIO %d already used. Allocation for \"%s\" failed\n",
- gpio, label ? label : "?");
- return -EBUSY;
- }
-
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_request);
-
-void imx_gpio_free(unsigned gpio)
-{
- if(gpio >= (GPIO_PORT_MAX + 1) * 32)
- return;
-
- clear_bit(gpio, imx_gpio_alloc_map);
-}
-
-EXPORT_SYMBOL(imx_gpio_free);
-
-int imx_gpio_direction_input(unsigned gpio)
-{
- imx_gpio_mode(gpio | GPIO_IN | GPIO_GIUS | GPIO_DR);
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_input);
-
-int imx_gpio_direction_output(unsigned gpio, int value)
-{
- imx_gpio_set_value(gpio, value);
- imx_gpio_mode(gpio | GPIO_OUT | GPIO_GIUS | GPIO_DR);
- return 0;
-}
-
-EXPORT_SYMBOL(imx_gpio_direction_output);
-
-int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label)
-{
- const int *p = pin_list;
- int i;
- unsigned gpio;
- unsigned mode;
-
- for (i = 0; i < count; i++) {
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- mode = *p & ~(GPIO_PIN_MASK | GPIO_PORT_MASK);
-
- if (gpio >= (GPIO_PORT_MAX + 1) * 32)
- goto setup_error;
-
- if (alloc_mode & IMX_GPIO_ALLOC_MODE_RELEASE)
- imx_gpio_free(gpio);
- else if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_NO_ALLOC))
- if (imx_gpio_request(gpio, label))
- if (!(alloc_mode & IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
- goto setup_error;
-
- if (!(alloc_mode & (IMX_GPIO_ALLOC_MODE_ALLOC_ONLY |
- IMX_GPIO_ALLOC_MODE_RELEASE)))
- imx_gpio_mode(gpio | mode);
-
- p++;
- }
- return 0;
-
-setup_error:
- if(alloc_mode & (IMX_GPIO_ALLOC_MODE_NO_ALLOC |
- IMX_GPIO_ALLOC_MODE_TRY_ALLOC))
- return -EINVAL;
-
- while (p != pin_list) {
- p--;
- gpio = *p & (GPIO_PIN_MASK | GPIO_PORT_MASK);
- imx_gpio_free(gpio);
- }
-
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(imx_gpio_setup_multiple_pins);
-
-void __imx_gpio_set_value(unsigned gpio, int value)
-{
- imx_gpio_set_value_inline(gpio, value);
-}
-
-EXPORT_SYMBOL(__imx_gpio_set_value);
-
-int imx_gpio_to_irq(unsigned gpio)
-{
- return IRQ_GPIOA(0) + gpio;
-}
-
-EXPORT_SYMBOL(imx_gpio_to_irq);
-
-int imx_irq_to_gpio(unsigned irq)
-{
- if (irq < IRQ_GPIOA(0))
- return -EINVAL;
- return irq - IRQ_GPIOA(0);
-}
-
-EXPORT_SYMBOL(imx_irq_to_gpio);
-
-static struct resource imx_mmc_resources[] = {
- [0] = {
- .start = 0x00214000,
- .end = 0x002140FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (SDHC_INT),
- .end = (SDHC_INT),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 imxmmmc_dmamask = 0xffffffffUL;
-
-static struct platform_device imx_mmc_device = {
- .name = "imx-mmc",
- .id = 0,
- .dev = {
- .dma_mask = &imxmmmc_dmamask,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(imx_mmc_resources),
- .resource = imx_mmc_resources,
-};
-
-void __init imx_set_mmc_info(struct imxmmc_platform_data *info)
-{
- imx_mmc_device.dev.platform_data = info;
-}
-
-static struct platform_device *devices[] __initdata = {
- &imx_mmc_device,
-};
-
-static struct map_desc imx_io_desc[] __initdata = {
- {
- .virtual = IMX_IO_BASE,
- .pfn = __phys_to_pfn(IMX_IO_PHYS),
- .length = IMX_IO_SIZE,
- .type = MT_DEVICE
- }
-};
-
-void __init
-imx_map_io(void)
-{
- iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
-}
-
-static int __init imx_init(void)
-{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-subsys_initcall(imx_init);
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/generic.h
- *
- * Author: Sascha Hauer <sascha@saschahauer.de>
- * Copyright: Synertronixx GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-extern void __init imx_map_io(void);
-extern void __init imx_init_irq(void);
-
-struct sys_timer;
-extern struct sys_timer imx_timer;
+++ /dev/null
-/* arch/arm/mach-imx/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
- .macro addruart,rx
- mrc p15, 0, \rx, c1, c0
- tst \rx, #1 @ MMU enabled?
- moveq \rx, #0x00000000 @ physical
- movne \rx, #0xe0000000 @ virtual
- orreq \rx, \rx, #0x00200000 @ physical
- orr \rx, \rx, #0x00006000 @ UART1 offset
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #0x40] @ TXDATA
- .endm
-
- .macro waituart,rd,rx
- .endm
-
- .macro busyuart,rd,rx
-1002: ldr \rd, [\rx, #0x98] @ SR2
- tst \rd, #1 << 3 @ TXDC
- beq 1002b @ wait until transmit done
- .endm
+++ /dev/null
-/*
- * linux/include/asm-arm/imxads/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ASM_ARCH_DMA_H
-#define __ASM_ARCH_DMA_H
-
-typedef enum {
- DMA_PRIO_HIGH = 0,
- DMA_PRIO_MEDIUM = 1,
- DMA_PRIO_LOW = 2
-} imx_dma_prio;
-
-#define DMA_REQ_UART3_T 2
-#define DMA_REQ_UART3_R 3
-#define DMA_REQ_SSI2_T 4
-#define DMA_REQ_SSI2_R 5
-#define DMA_REQ_CSI_STAT 6
-#define DMA_REQ_CSI_R 7
-#define DMA_REQ_MSHC 8
-#define DMA_REQ_DSPA_DCT_DOUT 9
-#define DMA_REQ_DSPA_DCT_DIN 10
-#define DMA_REQ_DSPA_MAC 11
-#define DMA_REQ_EXT 12
-#define DMA_REQ_SDHC 13
-#define DMA_REQ_SPI1_R 14
-#define DMA_REQ_SPI1_T 15
-#define DMA_REQ_SSI_T 16
-#define DMA_REQ_SSI_R 17
-#define DMA_REQ_ASP_DAC 18
-#define DMA_REQ_ASP_ADC 19
-#define DMA_REQ_USP_EP(x) (20+(x))
-#define DMA_REQ_SPI2_R 26
-#define DMA_REQ_SPI2_T 27
-#define DMA_REQ_UART2_T 28
-#define DMA_REQ_UART2_R 29
-#define DMA_REQ_UART1_T 30
-#define DMA_REQ_UART1_R 31
-
-#endif /* _ASM_ARCH_DMA_H */
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/entry-macro.S
- *
- * Low-level IRQ helper macros for iMX-based platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-#include <mach/hardware.h>
-
- .macro disable_fiq
- .endm
-
- .macro get_irqnr_preamble, base, tmp
- .endm
-
- .macro arch_ret_to_user, tmp1, tmp2
- .endm
-
-#define AITC_NIVECSR 0x40
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \base, =IO_ADDRESS(IMX_AITC_BASE)
- @ Load offset & priority of the highest priority
- @ interrupt pending.
- ldr \irqstat, [\base, #AITC_NIVECSR]
- @ Shift off the priority leaving the offset or
- @ "interrupt number", use arithmetic shift to
- @ transform illegal source (0xffff) as -1
- mov \irqnr, \irqstat, asr #16
- adds \tmp, \irqnr, #1
- .endm
+++ /dev/null
-#ifndef _IMX_GPIO_H
-
-#include <linux/kernel.h>
-#include <mach/hardware.h>
-#include <mach/imx-regs.h>
-
-#define IMX_GPIO_ALLOC_MODE_NORMAL 0
-#define IMX_GPIO_ALLOC_MODE_NO_ALLOC 1
-#define IMX_GPIO_ALLOC_MODE_TRY_ALLOC 2
-#define IMX_GPIO_ALLOC_MODE_ALLOC_ONLY 4
-#define IMX_GPIO_ALLOC_MODE_RELEASE 8
-
-extern int imx_gpio_request(unsigned gpio, const char *label);
-
-extern void imx_gpio_free(unsigned gpio);
-
-extern int imx_gpio_setup_multiple_pins(const int *pin_list, unsigned count,
- int alloc_mode, const char *label);
-
-extern int imx_gpio_direction_input(unsigned gpio);
-
-extern int imx_gpio_direction_output(unsigned gpio, int value);
-
-extern void __imx_gpio_set_value(unsigned gpio, int value);
-
-static inline int imx_gpio_get_value(unsigned gpio)
-{
- return SSR(gpio >> GPIO_PORT_SHIFT) & (1 << (gpio & GPIO_PIN_MASK));
-}
-
-static inline void imx_gpio_set_value_inline(unsigned gpio, int value)
-{
- unsigned long flags;
-
- raw_local_irq_save(flags);
- if(value)
- DR(gpio >> GPIO_PORT_SHIFT) |= (1 << (gpio & GPIO_PIN_MASK));
- else
- DR(gpio >> GPIO_PORT_SHIFT) &= ~(1 << (gpio & GPIO_PIN_MASK));
- raw_local_irq_restore(flags);
-}
-
-static inline void imx_gpio_set_value(unsigned gpio, int value)
-{
- if(__builtin_constant_p(gpio))
- imx_gpio_set_value_inline(gpio, value);
- else
- __imx_gpio_set_value(gpio, value);
-}
-
-extern int imx_gpio_to_irq(unsigned gpio);
-
-extern int imx_irq_to_gpio(unsigned irq);
-
-/*-------------------------------------------------------------------------*/
-
-/* Wrappers for "new style" GPIO calls. These calls i.MX specific versions
- * to allow future extension of GPIO logic.
- */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- return imx_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- might_sleep();
-
- imx_gpio_free(gpio);
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return imx_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return imx_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return imx_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- imx_gpio_set_value(gpio, value);
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return imx_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return imx_irq_to_gpio(irq);
-}
-
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/hardware.h
- *
- * Copyright (C) 1999 ARM Limited.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-#include "imx-regs.h"
-
-#ifndef __ASSEMBLY__
-# define __REG(x) (*((volatile u32 *)IO_ADDRESS(x)))
-
-# define __REG2(x,y) (*(volatile u32 *)((u32)&__REG(x) + (y)))
-#endif
-
-/*
- * Memory map
- */
-
-#define IMX_IO_PHYS 0x00200000
-#define IMX_IO_SIZE 0x00100000
-#define IMX_IO_BASE 0xe0000000
-
-#define IMX_CS0_PHYS 0x10000000
-#define IMX_CS0_SIZE 0x02000000
-#define IMX_CS0_VIRT 0xe8000000
-
-#define IMX_CS1_PHYS 0x12000000
-#define IMX_CS1_SIZE 0x01000000
-#define IMX_CS1_VIRT 0xea000000
-
-#define IMX_CS2_PHYS 0x13000000
-#define IMX_CS2_SIZE 0x01000000
-#define IMX_CS2_VIRT 0xeb000000
-
-#define IMX_CS3_PHYS 0x14000000
-#define IMX_CS3_SIZE 0x01000000
-#define IMX_CS3_VIRT 0xec000000
-
-#define IMX_CS4_PHYS 0x15000000
-#define IMX_CS4_SIZE 0x01000000
-#define IMX_CS4_VIRT 0xed000000
-
-#define IMX_CS5_PHYS 0x16000000
-#define IMX_CS5_SIZE 0x01000000
-#define IMX_CS5_VIRT 0xee000000
-
-#define IMX_FB_VIRT 0xF1000000
-#define IMX_FB_SIZE (256*1024)
-
-/* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x) ((x) | IMX_IO_BASE)
-
-#ifndef __ASSEMBLY__
-/*
- * Handy routine to set GPIO functions
- */
-extern void imx_gpio_mode( int gpio_mode );
-
-#endif
-
-#define MAXIRQNUM 62
-#define MAXFIQNUM 62
-#define MAXSWINUM 62
-
-/*
- * Use SDRAM for memory
- */
-#define MEM_SIZE 0x01000000
-
-#ifdef CONFIG_ARCH_MX1ADS
-#include "mx1ads.h"
-#endif
-
-#endif
+++ /dev/null
-/*
- * linux/include/asm-arm/imxads/dma.h
- *
- * Copyright (C) 1997,1998 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <mach/dma.h>
-
-#ifndef __ASM_ARCH_IMX_DMA_H
-#define __ASM_ARCH_IMX_DMA_H
-
-#define IMX_DMA_CHANNELS 11
-
-/*
- * struct imx_dma_channel - i.MX specific DMA extension
- * @name: name specified by DMA client
- * @irq_handler: client callback for end of transfer
- * @err_handler: client callback for error condition
- * @data: clients context data for callbacks
- * @dma_mode: direction of the transfer %DMA_MODE_READ or %DMA_MODE_WRITE
- * @sg: pointer to the actual read/written chunk for scatter-gather emulation
- * @sgbc: counter of processed bytes in the actual read/written chunk
- * @resbytes: total residual number of bytes to transfer
- * (it can be lower or same as sum of SG mapped chunk sizes)
- * @sgcount: number of chunks to be read/written
- *
- * Structure is used for IMX DMA processing. It would be probably good
- * @struct dma_struct in the future for external interfacing and use
- * @struct imx_dma_channel only as extension to it.
- */
-
-struct imx_dma_channel {
- const char *name;
- void (*irq_handler) (int, void *);
- void (*err_handler) (int, void *, int errcode);
- void *data;
- unsigned int dma_mode;
- struct scatterlist *sg;
- unsigned int sgbc;
- unsigned int sgcount;
- unsigned int resbytes;
- int dma_num;
-};
-
-extern struct imx_dma_channel imx_dma_channels[IMX_DMA_CHANNELS];
-
-#define IMX_DMA_ERR_BURST 1
-#define IMX_DMA_ERR_REQUEST 2
-#define IMX_DMA_ERR_TRANSFER 4
-#define IMX_DMA_ERR_BUFFER 8
-
-/* The type to distinguish channel numbers parameter from ordinal int type */
-typedef int imx_dmach_t;
-
-#define DMA_MODE_READ 0
-#define DMA_MODE_WRITE 1
-#define DMA_MODE_MASK 1
-
-int
-imx_dma_setup_single(imx_dmach_t dma_ch, dma_addr_t dma_address,
- unsigned int dma_length, unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_sg(imx_dmach_t dma_ch,
- struct scatterlist *sg, unsigned int sgcount, unsigned int dma_length,
- unsigned int dev_addr, unsigned int dmamode);
-
-int
-imx_dma_setup_handlers(imx_dmach_t dma_ch,
- void (*irq_handler) (int, void *),
- void (*err_handler) (int, void *, int), void *data);
-
-void imx_dma_enable(imx_dmach_t dma_ch);
-
-void imx_dma_disable(imx_dmach_t dma_ch);
-
-int imx_dma_request(imx_dmach_t dma_ch, const char *name);
-
-void imx_dma_free(imx_dmach_t dma_ch);
-
-imx_dmach_t imx_dma_request_by_prio(const char *name, imx_dma_prio prio);
-
-
-#endif /* _ASM_ARCH_IMX_DMA_H */
+++ /dev/null
-#ifndef _IMX_REGS_H
-#define _IMX_REGS_H
-/* ------------------------------------------------------------------------
- * Motorola IMX system registers
- * ------------------------------------------------------------------------
- *
- */
-
-/*
- * Register BASEs, based on OFFSETs
- *
- */
-#define IMX_AIPI1_BASE (0x00000 + IMX_IO_BASE)
-#define IMX_WDT_BASE (0x01000 + IMX_IO_BASE)
-#define IMX_TIM1_BASE (0x02000 + IMX_IO_BASE)
-#define IMX_TIM2_BASE (0x03000 + IMX_IO_BASE)
-#define IMX_RTC_BASE (0x04000 + IMX_IO_BASE)
-#define IMX_LCDC_BASE (0x05000 + IMX_IO_BASE)
-#define IMX_UART1_BASE (0x06000 + IMX_IO_BASE)
-#define IMX_UART2_BASE (0x07000 + IMX_IO_BASE)
-#define IMX_PWM_BASE (0x08000 + IMX_IO_BASE)
-#define IMX_DMAC_BASE (0x09000 + IMX_IO_BASE)
-#define IMX_AIPI2_BASE (0x10000 + IMX_IO_BASE)
-#define IMX_SIM_BASE (0x11000 + IMX_IO_BASE)
-#define IMX_USBD_BASE (0x12000 + IMX_IO_BASE)
-#define IMX_SPI1_BASE (0x13000 + IMX_IO_BASE)
-#define IMX_MMC_BASE (0x14000 + IMX_IO_BASE)
-#define IMX_ASP_BASE (0x15000 + IMX_IO_BASE)
-#define IMX_BTA_BASE (0x16000 + IMX_IO_BASE)
-#define IMX_I2C_BASE (0x17000 + IMX_IO_BASE)
-#define IMX_SSI_BASE (0x18000 + IMX_IO_BASE)
-#define IMX_SPI2_BASE (0x19000 + IMX_IO_BASE)
-#define IMX_MSHC_BASE (0x1A000 + IMX_IO_BASE)
-#define IMX_PLL_BASE (0x1B000 + IMX_IO_BASE)
-#define IMX_GPIO_BASE (0x1C000 + IMX_IO_BASE)
-#define IMX_EIM_BASE (0x20000 + IMX_IO_BASE)
-#define IMX_SDRAMC_BASE (0x21000 + IMX_IO_BASE)
-#define IMX_MMA_BASE (0x22000 + IMX_IO_BASE)
-#define IMX_AITC_BASE (0x23000 + IMX_IO_BASE)
-#define IMX_CSI_BASE (0x24000 + IMX_IO_BASE)
-
-/* PLL registers */
-#define CSCR __REG(IMX_PLL_BASE) /* Clock Source Control Register */
-#define CSCR_SPLL_RESTART (1<<22)
-#define CSCR_MPLL_RESTART (1<<21)
-#define CSCR_SYSTEM_SEL (1<<16)
-#define CSCR_BCLK_DIV (0xf<<10)
-#define CSCR_MPU_PRESC (1<<15)
-#define CSCR_SPEN (1<<1)
-#define CSCR_MPEN (1<<0)
-
-#define MPCTL0 __REG(IMX_PLL_BASE + 0x4) /* MCU PLL Control Register 0 */
-#define MPCTL1 __REG(IMX_PLL_BASE + 0x8) /* MCU PLL and System Clock Register 1 */
-#define SPCTL0 __REG(IMX_PLL_BASE + 0xc) /* System PLL Control Register 0 */
-#define SPCTL1 __REG(IMX_PLL_BASE + 0x10) /* System PLL Control Register 1 */
-#define PCDR __REG(IMX_PLL_BASE + 0x20) /* Peripheral Clock Divider Register */
-
-/*
- * GPIO Module and I/O Multiplexer
- * x = 0..3 for reg_A, reg_B, reg_C, reg_D
- */
-#define DDIR(x) __REG2(IMX_GPIO_BASE + 0x00, ((x) & 3) << 8)
-#define OCR1(x) __REG2(IMX_GPIO_BASE + 0x04, ((x) & 3) << 8)
-#define OCR2(x) __REG2(IMX_GPIO_BASE + 0x08, ((x) & 3) << 8)
-#define ICONFA1(x) __REG2(IMX_GPIO_BASE + 0x0c, ((x) & 3) << 8)
-#define ICONFA2(x) __REG2(IMX_GPIO_BASE + 0x10, ((x) & 3) << 8)
-#define ICONFB1(x) __REG2(IMX_GPIO_BASE + 0x14, ((x) & 3) << 8)
-#define ICONFB2(x) __REG2(IMX_GPIO_BASE + 0x18, ((x) & 3) << 8)
-#define DR(x) __REG2(IMX_GPIO_BASE + 0x1c, ((x) & 3) << 8)
-#define GIUS(x) __REG2(IMX_GPIO_BASE + 0x20, ((x) & 3) << 8)
-#define SSR(x) __REG2(IMX_GPIO_BASE + 0x24, ((x) & 3) << 8)
-#define ICR1(x) __REG2(IMX_GPIO_BASE + 0x28, ((x) & 3) << 8)
-#define ICR2(x) __REG2(IMX_GPIO_BASE + 0x2c, ((x) & 3) << 8)
-#define IMR(x) __REG2(IMX_GPIO_BASE + 0x30, ((x) & 3) << 8)
-#define ISR(x) __REG2(IMX_GPIO_BASE + 0x34, ((x) & 3) << 8)
-#define GPR(x) __REG2(IMX_GPIO_BASE + 0x38, ((x) & 3) << 8)
-#define SWR(x) __REG2(IMX_GPIO_BASE + 0x3c, ((x) & 3) << 8)
-#define PUEN(x) __REG2(IMX_GPIO_BASE + 0x40, ((x) & 3) << 8)
-
-#define GPIO_PORT_MAX 3
-
-#define GPIO_PIN_MASK 0x1f
-#define GPIO_PORT_MASK (0x3 << 5)
-
-#define GPIO_PORT_SHIFT 5
-#define GPIO_PORTA (0<<5)
-#define GPIO_PORTB (1<<5)
-#define GPIO_PORTC (2<<5)
-#define GPIO_PORTD (3<<5)
-
-#define GPIO_OUT (1<<7)
-#define GPIO_IN (0<<7)
-#define GPIO_PUEN (1<<8)
-
-#define GPIO_PF (0<<9)
-#define GPIO_AF (1<<9)
-
-#define GPIO_OCR_SHIFT 10
-#define GPIO_OCR_MASK (3<<10)
-#define GPIO_AIN (0<<10)
-#define GPIO_BIN (1<<10)
-#define GPIO_CIN (2<<10)
-#define GPIO_DR (3<<10)
-
-#define GPIO_AOUT_SHIFT 12
-#define GPIO_AOUT_MASK (3<<12)
-#define GPIO_AOUT (0<<12)
-#define GPIO_AOUT_ISR (1<<12)
-#define GPIO_AOUT_0 (2<<12)
-#define GPIO_AOUT_1 (3<<12)
-
-#define GPIO_BOUT_SHIFT 14
-#define GPIO_BOUT_MASK (3<<14)
-#define GPIO_BOUT (0<<14)
-#define GPIO_BOUT_ISR (1<<14)
-#define GPIO_BOUT_0 (2<<14)
-#define GPIO_BOUT_1 (3<<14)
-
-#define GPIO_GIUS (1<<16)
-
-/* assignements for GPIO alternate/primary functions */
-
-/* FIXME: This list is not completed. The correct directions are
- * missing on some (many) pins
- */
-#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 )
-#define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 )
-#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 )
-#define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 )
-#define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 )
-#define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 )
-#define PA4_PF_CSI_D0 ( GPIO_PORTA | GPIO_PF | 4 )
-#define PA5_PF_CSI_D1 ( GPIO_PORTA | GPIO_PF | 5 )
-#define PA6_PF_CSI_D2 ( GPIO_PORTA | GPIO_PF | 6 )
-#define PA7_PF_CSI_D3 ( GPIO_PORTA | GPIO_PF | 7 )
-#define PA8_PF_CSI_D4 ( GPIO_PORTA | GPIO_PF | 8 )
-#define PA9_PF_CSI_D5 ( GPIO_PORTA | GPIO_PF | 9 )
-#define PA10_PF_CSI_D6 ( GPIO_PORTA | GPIO_PF | 10 )
-#define PA11_PF_CSI_D7 ( GPIO_PORTA | GPIO_PF | 11 )
-#define PA12_PF_CSI_VSYNC ( GPIO_PORTA | GPIO_PF | 12 )
-#define PA13_PF_CSI_HSYNC ( GPIO_PORTA | GPIO_PF | 13 )
-#define PA14_PF_CSI_PIXCLK ( GPIO_PORTA | GPIO_PF | 14 )
-#define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 )
-#define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 )
-#define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 )
-#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 )
-#define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 )
-#define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 )
-#define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 )
-#define PA21_PF_A0 ( GPIO_PORTA | GPIO_PF | 21 )
-#define PA22_PF_CS4 ( GPIO_PORTA | GPIO_PF | 22 )
-#define PA23_PF_CS5 ( GPIO_PORTA | GPIO_PF | 23 )
-#define PA24_PF_A16 ( GPIO_PORTA | GPIO_PF | 24 )
-#define PA24_AF_ETMTRACEPKT0 ( GPIO_PORTA | GPIO_AF | 24 )
-#define PA25_PF_A17 ( GPIO_PORTA | GPIO_PF | 25 )
-#define PA25_AF_ETMTRACEPKT1 ( GPIO_PORTA | GPIO_AF | 25 )
-#define PA26_PF_A18 ( GPIO_PORTA | GPIO_PF | 26 )
-#define PA26_AF_ETMTRACEPKT2 ( GPIO_PORTA | GPIO_AF | 26 )
-#define PA27_PF_A19 ( GPIO_PORTA | GPIO_PF | 27 )
-#define PA27_AF_ETMTRACEPKT3 ( GPIO_PORTA | GPIO_AF | 27 )
-#define PA28_PF_A20 ( GPIO_PORTA | GPIO_PF | 28 )
-#define PA28_AF_ETMPIPESTAT0 ( GPIO_PORTA | GPIO_AF | 28 )
-#define PA29_PF_A21 ( GPIO_PORTA | GPIO_PF | 29 )
-#define PA29_AF_ETMPIPESTAT1 ( GPIO_PORTA | GPIO_AF | 29 )
-#define PA30_PF_A22 ( GPIO_PORTA | GPIO_PF | 30 )
-#define PA30_AF_ETMPIPESTAT2 ( GPIO_PORTA | GPIO_AF | 30 )
-#define PA31_PF_A23 ( GPIO_PORTA | GPIO_PF | 31 )
-#define PA31_AF_ETMTRACECLK ( GPIO_PORTA | GPIO_AF | 31 )
-#define PB8_PF_SD_DAT0 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 8 )
-#define PB8_AF_MS_PIO ( GPIO_PORTB | GPIO_AF | 8 )
-#define PB9_PF_SD_DAT1 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 9 )
-#define PB9_AF_MS_PI1 ( GPIO_PORTB | GPIO_AF | 9 )
-#define PB10_PF_SD_DAT2 ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 10 )
-#define PB10_AF_MS_SCLKI ( GPIO_PORTB | GPIO_AF | 10 )
-#define PB11_PF_SD_DAT3 ( GPIO_PORTB | GPIO_PF | 11 )
-#define PB11_AF_MS_SDIO ( GPIO_PORTB | GPIO_AF | 11 )
-#define PB12_PF_SD_CLK ( GPIO_PORTB | GPIO_PF | 12 )
-#define PB12_AF_MS_SCLK0 ( GPIO_PORTB | GPIO_AF | 12 )
-#define PB13_PF_SD_CMD ( GPIO_PORTB | GPIO_PF | GPIO_PUEN | 13 )
-#define PB13_AF_MS_BS ( GPIO_PORTB | GPIO_AF | 13 )
-#define PB14_AF_SSI_RXFS ( GPIO_PORTB | GPIO_AF | 14 )
-#define PB15_AF_SSI_RXCLK ( GPIO_PORTB | GPIO_AF | 15 )
-#define PB16_AF_SSI_RXDAT ( GPIO_PORTB | GPIO_IN | GPIO_AF | 16 )
-#define PB17_AF_SSI_TXDAT ( GPIO_PORTB | GPIO_OUT | GPIO_AF | 17 )
-#define PB18_AF_SSI_TXFS ( GPIO_PORTB | GPIO_AF | 18 )
-#define PB19_AF_SSI_TXCLK ( GPIO_PORTB | GPIO_AF | 19 )
-#define PB20_PF_USBD_AFE ( GPIO_PORTB | GPIO_PF | 20 )
-#define PB21_PF_USBD_OE ( GPIO_PORTB | GPIO_PF | 21 )
-#define PB22_PFUSBD_RCV ( GPIO_PORTB | GPIO_PF | 22 )
-#define PB23_PF_USBD_SUSPND ( GPIO_PORTB | GPIO_PF | 23 )
-#define PB24_PF_USBD_VP ( GPIO_PORTB | GPIO_PF | 24 )
-#define PB25_PF_USBD_VM ( GPIO_PORTB | GPIO_PF | 25 )
-#define PB26_PF_USBD_VPO ( GPIO_PORTB | GPIO_PF | 26 )
-#define PB27_PF_USBD_VMO ( GPIO_PORTB | GPIO_PF | 27 )
-#define PB28_PF_UART2_CTS ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 28 )
-#define PB29_PF_UART2_RTS ( GPIO_PORTB | GPIO_IN | GPIO_PF | 29 )
-#define PB30_PF_UART2_TXD ( GPIO_PORTB | GPIO_OUT | GPIO_PF | 30 )
-#define PB31_PF_UART2_RXD ( GPIO_PORTB | GPIO_IN | GPIO_PF | 31 )
-#define PC3_PF_SSI_RXFS ( GPIO_PORTC | GPIO_PF | 3 )
-#define PC4_PF_SSI_RXCLK ( GPIO_PORTC | GPIO_PF | 4 )
-#define PC5_PF_SSI_RXDAT ( GPIO_PORTC | GPIO_IN | GPIO_PF | 5 )
-#define PC6_PF_SSI_TXDAT ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 6 )
-#define PC7_PF_SSI_TXFS ( GPIO_PORTC | GPIO_PF | 7 )
-#define PC8_PF_SSI_TXCLK ( GPIO_PORTC | GPIO_PF | 8 )
-#define PC9_PF_UART1_CTS ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 9 )
-#define PC10_PF_UART1_RTS ( GPIO_PORTC | GPIO_IN | GPIO_PF | 10 )
-#define PC11_PF_UART1_TXD ( GPIO_PORTC | GPIO_OUT | GPIO_PF | 11 )
-#define PC12_PF_UART1_RXD ( GPIO_PORTC | GPIO_IN | GPIO_PF | 12 )
-#define PC13_PF_SPI1_SPI_RDY ( GPIO_PORTC | GPIO_PF | 13 )
-#define PC14_PF_SPI1_SCLK ( GPIO_PORTC | GPIO_PF | 14 )
-#define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 )
-#define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 )
-#define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 )
-#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 )
-#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 )
-#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 )
-#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 )
-#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 )
-#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 )
-#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 )
-#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
-#define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
-#define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
-#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
-#define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 )
-#define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )
-#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 )
-#define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 )
-#define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 )
-#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 )
-#define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 )
-#define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 )
-#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 )
-#define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 )
-#define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 )
-#define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 )
-#define PD14_PF_FLM_VSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 14 )
-#define PD15_PF_LD0 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 15 )
-#define PD16_PF_LD1 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 16 )
-#define PD17_PF_LD2 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 17 )
-#define PD18_PF_LD3 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 18 )
-#define PD19_PF_LD4 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 19 )
-#define PD20_PF_LD5 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 20 )
-#define PD21_PF_LD6 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 21 )
-#define PD22_PF_LD7 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 22 )
-#define PD23_PF_LD8 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 23 )
-#define PD24_PF_LD9 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 24 )
-#define PD25_PF_LD10 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 25 )
-#define PD26_PF_LD11 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 26 )
-#define PD27_PF_LD12 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 27 )
-#define PD28_PF_LD13 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 28 )
-#define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 )
-#define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 )
-#define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 )
-#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 )
-
-/*
- * PWM controller
- */
-#define PWMC __REG(IMX_PWM_BASE + 0x00) /* PWM Control Register */
-#define PWMS __REG(IMX_PWM_BASE + 0x04) /* PWM Sample Register */
-#define PWMP __REG(IMX_PWM_BASE + 0x08) /* PWM Period Register */
-#define PWMCNT __REG(IMX_PWM_BASE + 0x0C) /* PWM Counter Register */
-
-#define PWMC_HCTR (0x01<<18) /* Halfword FIFO Data Swapping */
-#define PWMC_BCTR (0x01<<17) /* Byte FIFO Data Swapping */
-#define PWMC_SWR (0x01<<16) /* Software Reset */
-#define PWMC_CLKSRC (0x01<<15) /* Clock Source */
-#define PWMC_PRESCALER(x) (((x-1) & 0x7F) << 8) /* PRESCALER */
-#define PWMC_IRQ (0x01<< 7) /* Interrupt Request */
-#define PWMC_IRQEN (0x01<< 6) /* Interrupt Request Enable */
-#define PWMC_FIFOAV (0x01<< 5) /* FIFO Available */
-#define PWMC_EN (0x01<< 4) /* Enables/Disables the PWM */
-#define PWMC_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
-#define PWMC_CLKSEL(x) (((x) & 0x03) << 0) /* Clock Selection */
-
-#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
-#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
-#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
-
-/*
- * DMA Controller
- */
-#define DCR __REG(IMX_DMAC_BASE +0x00) /* DMA Control Register */
-#define DISR __REG(IMX_DMAC_BASE +0x04) /* DMA Interrupt status Register */
-#define DIMR __REG(IMX_DMAC_BASE +0x08) /* DMA Interrupt mask Register */
-#define DBTOSR __REG(IMX_DMAC_BASE +0x0c) /* DMA Burst timeout status Register */
-#define DRTOSR __REG(IMX_DMAC_BASE +0x10) /* DMA Request timeout Register */
-#define DSESR __REG(IMX_DMAC_BASE +0x14) /* DMA Transfer Error Status Register */
-#define DBOSR __REG(IMX_DMAC_BASE +0x18) /* DMA Buffer overflow status Register */
-#define DBTOCR __REG(IMX_DMAC_BASE +0x1c) /* DMA Burst timeout control Register */
-#define WSRA __REG(IMX_DMAC_BASE +0x40) /* W-Size Register A */
-#define XSRA __REG(IMX_DMAC_BASE +0x44) /* X-Size Register A */
-#define YSRA __REG(IMX_DMAC_BASE +0x48) /* Y-Size Register A */
-#define WSRB __REG(IMX_DMAC_BASE +0x4c) /* W-Size Register B */
-#define XSRB __REG(IMX_DMAC_BASE +0x50) /* X-Size Register B */
-#define YSRB __REG(IMX_DMAC_BASE +0x54) /* Y-Size Register B */
-#define SAR(x) __REG2( IMX_DMAC_BASE + 0x80, (x) << 6) /* Source Address Registers */
-#define DAR(x) __REG2( IMX_DMAC_BASE + 0x84, (x) << 6) /* Destination Address Registers */
-#define CNTR(x) __REG2( IMX_DMAC_BASE + 0x88, (x) << 6) /* Count Registers */
-#define CCR(x) __REG2( IMX_DMAC_BASE + 0x8c, (x) << 6) /* Control Registers */
-#define RSSR(x) __REG2( IMX_DMAC_BASE + 0x90, (x) << 6) /* Request source select Registers */
-#define BLR(x) __REG2( IMX_DMAC_BASE + 0x94, (x) << 6) /* Burst length Registers */
-#define RTOR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Request timeout Registers */
-#define BUCR(x) __REG2( IMX_DMAC_BASE + 0x98, (x) << 6) /* Bus Utilization Registers */
-
-#define DCR_DRST (1<<1)
-#define DCR_DEN (1<<0)
-#define DBTOCR_EN (1<<15)
-#define DBTOCR_CNT(x) ((x) & 0x7fff )
-#define CNTR_CNT(x) ((x) & 0xffffff )
-#define CCR_DMOD_LINEAR ( 0x0 << 12 )
-#define CCR_DMOD_2D ( 0x1 << 12 )
-#define CCR_DMOD_FIFO ( 0x2 << 12 )
-#define CCR_DMOD_EOBFIFO ( 0x3 << 12 )
-#define CCR_SMOD_LINEAR ( 0x0 << 10 )
-#define CCR_SMOD_2D ( 0x1 << 10 )
-#define CCR_SMOD_FIFO ( 0x2 << 10 )
-#define CCR_SMOD_EOBFIFO ( 0x3 << 10 )
-#define CCR_MDIR_DEC (1<<9)
-#define CCR_MSEL_B (1<<8)
-#define CCR_DSIZ_32 ( 0x0 << 6 )
-#define CCR_DSIZ_8 ( 0x1 << 6 )
-#define CCR_DSIZ_16 ( 0x2 << 6 )
-#define CCR_SSIZ_32 ( 0x0 << 4 )
-#define CCR_SSIZ_8 ( 0x1 << 4 )
-#define CCR_SSIZ_16 ( 0x2 << 4 )
-#define CCR_REN (1<<3)
-#define CCR_RPT (1<<2)
-#define CCR_FRC (1<<1)
-#define CCR_CEN (1<<0)
-#define RTOR_EN (1<<15)
-#define RTOR_CLK (1<<14)
-#define RTOR_PSC (1<<13)
-
-/*
- * Interrupt controller
- */
-
-#define IMX_INTCNTL __REG(IMX_AITC_BASE+0x00)
-#define INTCNTL_FIAD (1<<19)
-#define INTCNTL_NIAD (1<<20)
-
-#define IMX_NIMASK __REG(IMX_AITC_BASE+0x04)
-#define IMX_INTENNUM __REG(IMX_AITC_BASE+0x08)
-#define IMX_INTDISNUM __REG(IMX_AITC_BASE+0x0c)
-#define IMX_INTENABLEH __REG(IMX_AITC_BASE+0x10)
-#define IMX_INTENABLEL __REG(IMX_AITC_BASE+0x14)
-
-/*
- * General purpose timers
- */
-#define IMX_TCTL(x) __REG( 0x00 + (x))
-#define TCTL_SWR (1<<15)
-#define TCTL_FRR (1<<8)
-#define TCTL_CAP_RIS (1<<6)
-#define TCTL_CAP_FAL (2<<6)
-#define TCTL_CAP_RIS_FAL (3<<6)
-#define TCTL_OM (1<<5)
-#define TCTL_IRQEN (1<<4)
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_16 (2<<1)
-#define TCTL_CLK_TIN (3<<1)
-#define TCTL_CLK_32 (4<<1)
-#define TCTL_TEN (1<<0)
-
-#define IMX_TPRER(x) __REG( 0x04 + (x))
-#define IMX_TCMP(x) __REG( 0x08 + (x))
-#define IMX_TCR(x) __REG( 0x0C + (x))
-#define IMX_TCN(x) __REG( 0x10 + (x))
-#define IMX_TSTAT(x) __REG( 0x14 + (x))
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-#endif // _IMX_REGS_H
+++ /dev/null
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-
-struct imxuart_platform_data {
- int (*init)(struct platform_device *pdev);
- void (*exit)(struct platform_device *pdev);
- unsigned int flags;
-};
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imxads/include/mach/irqs.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ARM_IRQS_H__
-#define __ARM_IRQS_H__
-
-/* Use the imx definitions */
-#include <mach/hardware.h>
-
-/*
- * IMX Interrupt numbers
- *
- */
-#define INT_SOFTINT 0
-#define CSI_INT 6
-#define DSPA_MAC_INT 7
-#define DSPA_INT 8
-#define COMP_INT 9
-#define MSHC_XINT 10
-#define GPIO_INT_PORTA 11
-#define GPIO_INT_PORTB 12
-#define GPIO_INT_PORTC 13
-#define LCDC_INT 14
-#define SIM_INT 15
-#define SIM_DATA_INT 16
-#define RTC_INT 17
-#define RTC_SAMINT 18
-#define UART2_MINT_PFERR 19
-#define UART2_MINT_RTS 20
-#define UART2_MINT_DTR 21
-#define UART2_MINT_UARTC 22
-#define UART2_MINT_TX 23
-#define UART2_MINT_RX 24
-#define UART1_MINT_PFERR 25
-#define UART1_MINT_RTS 26
-#define UART1_MINT_DTR 27
-#define UART1_MINT_UARTC 28
-#define UART1_MINT_TX 29
-#define UART1_MINT_RX 30
-#define VOICE_DAC_INT 31
-#define VOICE_ADC_INT 32
-#define PEN_DATA_INT 33
-#define PWM_INT 34
-#define SDHC_INT 35
-#define I2C_INT 39
-#define CSPI_INT 41
-#define SSI_TX_INT 42
-#define SSI_TX_ERR_INT 43
-#define SSI_RX_INT 44
-#define SSI_RX_ERR_INT 45
-#define TOUCH_INT 46
-#define USBD_INT0 47
-#define USBD_INT1 48
-#define USBD_INT2 49
-#define USBD_INT3 50
-#define USBD_INT4 51
-#define USBD_INT5 52
-#define USBD_INT6 53
-#define BTSYS_INT 55
-#define BTTIM_INT 56
-#define BTWUI_INT 57
-#define TIM2_INT 58
-#define TIM1_INT 59
-#define DMA_ERR 60
-#define DMA_INT 61
-#define GPIO_INT_PORTD 62
-
-#define IMX_IRQS (64)
-
-/* note: the IMX has four gpio ports (A-D), but only
- * the following pins are connected to the outside
- * world:
- *
- * PORT A: bits 0-31
- * PORT B: bits 8-31
- * PORT C: bits 3-17
- * PORT D: bits 6-31
- *
- * We map these interrupts straight on. As a result we have
- * several holes in the interrupt mapping. We do this for two
- * reasons:
- * - mapping the interrupts without holes would get
- * far more complicated
- * - Motorola could well decide to bring some processor
- * with more pins connected
- */
-
-#define IRQ_GPIOA(x) (IMX_IRQS + x)
-#define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x)
-#define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x)
-#define IRQ_GPIOD(x) (IRQ_GPIOC(32) + x)
-
-/* decode irq number to use with IMR(x), ISR(x) and friends */
-#define IRQ_TO_REG(irq) ((irq - IMX_IRQS) >> 5)
-
-/* all normal IRQs can be FIQs */
-#define FIQ_START 0
-/* switch betwean IRQ and FIQ */
-extern int imx_set_irq_fiq(unsigned int irq, unsigned int type);
-
-#define NR_IRQS (IRQ_GPIOD(32) + 1)
-#define IRQ_GPIO(x)
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/memory.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_MMU_H
-#define __ASM_ARCH_MMU_H
-
-#define PHYS_OFFSET UL(0x08000000)
-
-#endif
+++ /dev/null
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-struct imxmmc_platform_data {
- int (*card_present)(struct device *);
- int (*get_ro)(struct device *);
-};
-
-extern void imx_set_mmc_info(struct imxmmc_platform_data *info);
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/mx1ads.h
- *
- * Copyright (C) 2004 Robert Schwebel, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef __ASM_ARCH_MX1ADS_H
-#define __ASM_ARCH_MX1ADS_H
-
-/* ------------------------------------------------------------------------ */
-/* Memory Map for the M9328MX1ADS (MX1ADS) Board */
-/* ------------------------------------------------------------------------ */
-
-#define MX1ADS_FLASH_PHYS 0x10000000
-#define MX1ADS_FLASH_SIZE (16*1024*1024)
-
-#define IMX_FB_PHYS (0x0C000000 - 0x40000)
-
-#define CLK32 32000
-
-#endif /* __ASM_ARCH_MX1ADS_H */
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/spi_imx.h
- *
- * Copyright (C) 2006 SWAPP
- * Andrea Paterniani <a.paterniani@swapp-eng.it>
- *
- * Initial version inspired by:
- * linux-2.6.17-rc3-mm1/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef SPI_IMX_H_
-#define SPI_IMX_H_
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @num_chipselect: chipselects are used to distinguish individual
- * SPI slaves, and are numbered from zero to num_chipselects - 1.
- * each slave has a chipselect signal, but it's common that not
- * every chipselect is connected to a slave.
- * @enable_dma: if true enables DMA driven transfers.
-*/
-struct spi_imx_master {
- u8 num_chipselect;
- u8 enable_dma:1;
-};
-/*-------------------------------------------------------------------------*/
-
-
-/*-------------------------------------------------------------------------*/
-/**
- * struct spi_imx_chip - spi_board_info.controller_data for SPI
- * slave devices, copied to spi_device.controller_data.
- * @enable_loopback : used for test purpouse to internally connect RX and TX
- * sections.
- * @enable_dma : enables dma transfer (provided that controller driver has
- * dma enabled too).
- * @ins_ss_pulse : enable /SS pulse insertion between SPI burst.
- * @bclk_wait : number of bclk waits between each bits_per_word SPI burst.
- * @cs_control : function pointer to board-specific function to assert/deassert
- * I/O port to control HW generation of devices chip-select.
-*/
-struct spi_imx_chip {
- u8 enable_loopback:1;
- u8 enable_dma:1;
- u8 ins_ss_pulse:1;
- u16 bclk_wait:15;
- void (*cs_control)(u32 control);
-};
-
-/* Chip-select state */
-#define SPI_CS_ASSERT (1 << 0)
-#define SPI_CS_DEASSERT (1 << 1)
-/*-------------------------------------------------------------------------*/
-
-
-#endif /* SPI_IMX_H_*/
+++ /dev/null
-/*
- * arch/arm/mach-imxads/include/mach/system.h
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-static void
-arch_idle(void)
-{
- /*
- * This should do all the clock switching
- * and wait for interrupt tricks
- */
- cpu_do_idle();
-}
-
-static inline void
-arch_reset(char mode, const char *cmd)
-{
- cpu_reset(0);
-}
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-imxads/include/mach/uncompress.h
- *
- *
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define UART(x) (*(volatile unsigned long *)(serial_port + (x)))
-
-#define UART1_BASE 0x206000
-#define UART2_BASE 0x207000
-#define USR2 0x98
-#define USR2_TXFE (1<<14)
-#define TXR 0x40
-#define UCR1 0x80
-#define UCR1_UARTEN 1
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader. We search for the first enabled
- * port in the most probable order. If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
- unsigned long serial_port;
-
- do {
- serial_port = UART1_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- serial_port = UART2_BASE;
- if ( UART(UCR1) & UCR1_UARTEN )
- break;
- return;
- } while(0);
-
- while (!(UART(USR2) & USR2_TXFE))
- barrier();
-
- UART(TXR) = c;
-}
-
-static inline void flush(void)
-{
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
+++ /dev/null
-/*
- * arch/arm/mach-imx/include/mach/vmalloc.h
- *
- * Copyright (C) 2000 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/irq.c
- *
- * Copyright (C) 1999 ARM Limited
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * 03/03/2004 Sascha Hauer <sascha@saschahauer.de>
- * Copied from the motorola bsp package and added gpio demux
- * interrupt handler
- */
-
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <asm/mach/irq.h>
-
-/*
- *
- * We simply use the ENABLE DISABLE registers inside of the IMX
- * to turn on/off specific interrupts.
- *
- */
-
-#define INTCNTL_OFF 0x00
-#define NIMASK_OFF 0x04
-#define INTENNUM_OFF 0x08
-#define INTDISNUM_OFF 0x0C
-#define INTENABLEH_OFF 0x10
-#define INTENABLEL_OFF 0x14
-#define INTTYPEH_OFF 0x18
-#define INTTYPEL_OFF 0x1C
-#define NIPRIORITY_OFF(x) (0x20+4*(7-(x)))
-#define NIVECSR_OFF 0x40
-#define FIVECSR_OFF 0x44
-#define INTSRCH_OFF 0x48
-#define INTSRCL_OFF 0x4C
-#define INTFRCH_OFF 0x50
-#define INTFRCL_OFF 0x54
-#define NIPNDH_OFF 0x58
-#define NIPNDL_OFF 0x5C
-#define FIPNDH_OFF 0x60
-#define FIPNDL_OFF 0x64
-
-#define VA_AITC_BASE IO_ADDRESS(IMX_AITC_BASE)
-#define IMX_AITC_INTCNTL (VA_AITC_BASE + INTCNTL_OFF)
-#define IMX_AITC_NIMASK (VA_AITC_BASE + NIMASK_OFF)
-#define IMX_AITC_INTENNUM (VA_AITC_BASE + INTENNUM_OFF)
-#define IMX_AITC_INTDISNUM (VA_AITC_BASE + INTDISNUM_OFF)
-#define IMX_AITC_INTENABLEH (VA_AITC_BASE + INTENABLEH_OFF)
-#define IMX_AITC_INTENABLEL (VA_AITC_BASE + INTENABLEL_OFF)
-#define IMX_AITC_INTTYPEH (VA_AITC_BASE + INTTYPEH_OFF)
-#define IMX_AITC_INTTYPEL (VA_AITC_BASE + INTTYPEL_OFF)
-#define IMX_AITC_NIPRIORITY(x) (VA_AITC_BASE + NIPRIORITY_OFF(x))
-#define IMX_AITC_NIVECSR (VA_AITC_BASE + NIVECSR_OFF)
-#define IMX_AITC_FIVECSR (VA_AITC_BASE + FIVECSR_OFF)
-#define IMX_AITC_INTSRCH (VA_AITC_BASE + INTSRCH_OFF)
-#define IMX_AITC_INTSRCL (VA_AITC_BASE + INTSRCL_OFF)
-#define IMX_AITC_INTFRCH (VA_AITC_BASE + INTFRCH_OFF)
-#define IMX_AITC_INTFRCL (VA_AITC_BASE + INTFRCL_OFF)
-#define IMX_AITC_NIPNDH (VA_AITC_BASE + NIPNDH_OFF)
-#define IMX_AITC_NIPNDL (VA_AITC_BASE + NIPNDL_OFF)
-#define IMX_AITC_FIPNDH (VA_AITC_BASE + FIPNDH_OFF)
-#define IMX_AITC_FIPNDL (VA_AITC_BASE + FIPNDL_OFF)
-
-#if 0
-#define DEBUG_IRQ(fmt...) printk(fmt)
-#else
-#define DEBUG_IRQ(fmt...) do { } while (0)
-#endif
-
-static void
-imx_mask_irq(unsigned int irq)
-{
- __raw_writel(irq, IMX_AITC_INTDISNUM);
-}
-
-static void
-imx_unmask_irq(unsigned int irq)
-{
- __raw_writel(irq, IMX_AITC_INTENNUM);
-}
-
-#ifdef CONFIG_FIQ
-int imx_set_irq_fiq(unsigned int irq, unsigned int type)
-{
- unsigned int irqt;
-
- if (irq >= IMX_IRQS)
- return -EINVAL;
-
- if (irq < IMX_IRQS / 2) {
- irqt = __raw_readl(IMX_AITC_INTTYPEL) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEL);
- } else {
- irq -= IMX_IRQS / 2;
- irqt = __raw_readl(IMX_AITC_INTTYPEH) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), IMX_AITC_INTTYPEH);
- }
-
- return 0;
-}
-EXPORT_SYMBOL(imx_set_irq_fiq);
-#endif /* CONFIG_FIQ */
-
-static int
-imx_gpio_irq_type(unsigned int _irq, unsigned int type)
-{
- unsigned int irq_type = 0, irq, reg, bit;
-
- irq = _irq - IRQ_GPIOA(0);
- reg = irq >> 5;
- bit = 1 << (irq % 32);
-
- if (type == IRQ_TYPE_PROBE) {
- /* Don't mess with enabled GPIOs using preconfigured edges or
- GPIOs set to alternate function during probe */
- /* TODO: support probe */
-// if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx]) &
-// GPIO_bit(gpio))
-// return 0;
-// if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
-// return 0;
-// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- GIUS(reg) |= bit;
- DDIR(reg) &= ~(bit);
-
- DEBUG_IRQ("setting type of irq %d to ", _irq);
-
- if (type & IRQ_TYPE_EDGE_RISING) {
- DEBUG_IRQ("rising edges\n");
- irq_type = 0x0;
- }
- if (type & IRQ_TYPE_EDGE_FALLING) {
- DEBUG_IRQ("falling edges\n");
- irq_type = 0x1;
- }
- if (type & IRQ_TYPE_LEVEL_LOW) {
- DEBUG_IRQ("low level\n");
- irq_type = 0x3;
- }
- if (type & IRQ_TYPE_LEVEL_HIGH) {
- DEBUG_IRQ("high level\n");
- irq_type = 0x2;
- }
-
- if (irq % 32 < 16) {
- ICR1(reg) = (ICR1(reg) & ~(0x3 << ((irq % 16) * 2))) |
- (irq_type << ((irq % 16) * 2));
- } else {
- ICR2(reg) = (ICR2(reg) & ~(0x3 << ((irq % 16) * 2))) |
- (irq_type << ((irq % 16) * 2));
- }
-
- return 0;
-
-}
-
-static void
-imx_gpio_ack_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- ISR(IRQ_TO_REG(irq)) = 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_mask_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- IMR(IRQ_TO_REG(irq)) &= ~( 1 << ((irq - IRQ_GPIOA(0)) % 32));
-}
-
-static void
-imx_gpio_unmask_irq(unsigned int irq)
-{
- DEBUG_IRQ("%s: irq %d\n", __func__, irq);
- IMR(IRQ_TO_REG(irq)) |= 1 << ((irq - IRQ_GPIOA(0)) % 32);
-}
-
-static void
-imx_gpio_handler(unsigned int mask, unsigned int irq,
- struct irq_desc *desc)
-{
- while (mask) {
- if (mask & 1) {
- DEBUG_IRQ("handling irq %d\n", irq);
- generic_handle_irq(irq);
- }
- irq++;
- mask >>= 1;
- }
-}
-
-static void
-imx_gpioa_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(0);
- irq = IRQ_GPIOA(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiob_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(1);
- irq = IRQ_GPIOB(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpioc_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(2);
- irq = IRQ_GPIOC(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static void
-imx_gpiod_demux_handler(unsigned int irq_unused, struct irq_desc *desc)
-{
- unsigned int mask, irq;
-
- mask = ISR(3);
- irq = IRQ_GPIOD(0);
- imx_gpio_handler(mask, irq, desc);
-}
-
-static struct irq_chip imx_internal_chip = {
- .name = "MPU",
- .ack = imx_mask_irq,
- .mask = imx_mask_irq,
- .unmask = imx_unmask_irq,
-};
-
-static struct irq_chip imx_gpio_chip = {
- .name = "GPIO",
- .ack = imx_gpio_ack_irq,
- .mask = imx_gpio_mask_irq,
- .unmask = imx_gpio_unmask_irq,
- .set_type = imx_gpio_irq_type,
-};
-
-void __init
-imx_init_irq(void)
-{
- unsigned int irq;
-
- DEBUG_IRQ("Initializing imx interrupts\n");
-
- /* Disable all interrupts initially. */
- /* Do not rely on the bootloader. */
- __raw_writel(0, IMX_AITC_INTENABLEH);
- __raw_writel(0, IMX_AITC_INTENABLEL);
-
- /* Mask all GPIO interrupts as well */
- IMR(0) = 0;
- IMR(1) = 0;
- IMR(2) = 0;
- IMR(3) = 0;
-
- for (irq = 0; irq < IMX_IRQS; irq++) {
- set_irq_chip(irq, &imx_internal_chip);
- set_irq_handler(irq, handle_level_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- for (irq = IRQ_GPIOA(0); irq < IRQ_GPIOD(32); irq++) {
- set_irq_chip(irq, &imx_gpio_chip);
- set_irq_handler(irq, handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
-
- set_irq_chained_handler(GPIO_INT_PORTA, imx_gpioa_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTB, imx_gpiob_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTC, imx_gpioc_demux_handler);
- set_irq_chained_handler(GPIO_INT_PORTD, imx_gpiod_demux_handler);
-
- /* Release masking of interrupts according to priority */
- __raw_writel(-1, IMX_AITC_NIMASK);
-
-#ifdef CONFIG_FIQ
- /* Initialize FIQ */
- init_FIQ();
-#endif
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/leds-mx1ads.c
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * Original (leds-footbridge.c) by Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/leds.h>
-#include "leds.h"
-
-/*
- * The MX1ADS Board has only one usable LED,
- * so select only the timer led or the
- * cpu usage led
- */
-void
-mx1ads_leds_event(led_event_t ledevt)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- switch (ledevt) {
-#ifdef CONFIG_LEDS_CPU
- case led_idle_start:
- DR(0) &= ~(1<<2);
- break;
-
- case led_idle_end:
- DR(0) |= 1<<2;
- break;
-#endif
-
-#ifdef CONFIG_LEDS_TIMER
- case led_timer:
- DR(0) ^= 1<<2;
-#endif
- default:
- break;
- }
- local_irq_restore(flags);
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/leds.c
- *
- * Copyright (C) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/leds.h>
-#include <asm/mach-types.h>
-
-#include "leds.h"
-
-static int __init
-leds_init(void)
-{
- if (machine_is_mx1ads()) {
- leds_event = mx1ads_leds_event;
- }
-
- return 0;
-}
-
-__initcall(leds_init);
+++ /dev/null
-/*
- * arch/arm/mach-imx/leds.h
- *
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * blinky lights for IMX-based systems
- *
- */
-extern void mx1ads_leds_event(led_event_t evt);
+++ /dev/null
-/*
- * arch/arm/mach-imx/mx1ads.c
- *
- * Initially based on:
- * linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
- * Copyright (c) 2004 Sascha Hauer <sascha@saschahauer.de>
- *
- * 2004 (c) MontaVista Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/system.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/pgtable.h>
-#include <asm/page.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <mach/mmc.h>
-#include <mach/imx-uart.h>
-#include <linux/interrupt.h>
-#include "generic.h"
-
-static struct resource cs89x0_resources[] = {
- [0] = {
- .start = IMX_CS4_PHYS + 0x300,
- .end = IMX_CS4_PHYS + 0x300 + 16,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_GPIOC(17),
- .end = IRQ_GPIOC(17),
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device cs89x0_device = {
- .name = "cirrus-cs89x0",
- .num_resources = ARRAY_SIZE(cs89x0_resources),
- .resource = cs89x0_resources,
-};
-
-static struct imxuart_platform_data uart_pdata = {
- .flags = IMXUART_HAVE_RTSCTS,
-};
-
-static struct resource imx_uart1_resources[] = {
- [0] = {
- .start = 0x00206000,
- .end = 0x002060FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART1_MINT_RX),
- .end = (UART1_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART1_MINT_TX),
- .end = (UART1_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = UART1_MINT_RTS,
- .end = UART1_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart1_device = {
- .name = "imx-uart",
- .id = 0,
- .num_resources = ARRAY_SIZE(imx_uart1_resources),
- .resource = imx_uart1_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
-static struct resource imx_uart2_resources[] = {
- [0] = {
- .start = 0x00207000,
- .end = 0x002070FF,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = (UART2_MINT_RX),
- .end = (UART2_MINT_RX),
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = (UART2_MINT_TX),
- .end = (UART2_MINT_TX),
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = UART2_MINT_RTS,
- .end = UART2_MINT_RTS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device imx_uart2_device = {
- .name = "imx-uart",
- .id = 1,
- .num_resources = ARRAY_SIZE(imx_uart2_resources),
- .resource = imx_uart2_resources,
- .dev = {
- .platform_data = &uart_pdata,
- }
-};
-
-static struct platform_device *devices[] __initdata = {
- &cs89x0_device,
- &imx_uart1_device,
- &imx_uart2_device,
-};
-
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
-static int mx1ads_mmc_card_present(struct device *dev)
-{
- /* MMC/SD Card Detect is PB 20 on MX1ADS V1.0.7 */
- return (SSR(1) & (1 << 20) ? 0 : 1);
-}
-
-static struct imxmmc_platform_data mx1ads_mmc_info = {
- .card_present = mx1ads_mmc_card_present,
-};
-#endif
-
-static void __init
-mx1ads_init(void)
-{
-#ifdef CONFIG_LEDS
- imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2);
-#endif
-#if defined(CONFIG_MMC_IMX) || defined(CONFIG_MMC_IMX_MODULE)
- /* SD/MMC card detect */
- imx_gpio_mode(GPIO_PORTB | GPIO_GIUS | GPIO_IN | 20);
- imx_set_mmc_info(&mx1ads_mmc_info);
-#endif
-
- imx_gpio_mode(PC9_PF_UART1_CTS);
- imx_gpio_mode(PC10_PF_UART1_RTS);
- imx_gpio_mode(PC11_PF_UART1_TXD);
- imx_gpio_mode(PC12_PF_UART1_RXD);
-
- imx_gpio_mode(PB28_PF_UART2_CTS);
- imx_gpio_mode(PB29_PF_UART2_RTS);
- imx_gpio_mode(PB30_PF_UART2_TXD);
- imx_gpio_mode(PB31_PF_UART2_RXD);
-
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-static void __init
-mx1ads_map_io(void)
-{
- imx_map_io();
-}
-
-MACHINE_START(MX1ADS, "Motorola MX1ADS")
- /* Maintainer: Sascha Hauer, Pengutronix */
- .phys_io = 0x00200000,
- .io_pg_offst = ((0xe0000000) >> 18) & 0xfffc,
- .boot_params = 0x08000100,
- .map_io = mx1ads_map_io,
- .init_irq = imx_init_irq,
- .timer = &imx_timer,
- .init_machine = mx1ads_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-imx/time.c
- *
- * Copyright (C) 2000-2001 Deep Blue Solutions
- * Copyright (C) 2002 Shane Nay (shane@minirl.com)
- * Copyright (C) 2006-2007 Pavel Pisa (ppisa@pikron.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <asm/leds.h>
-#include <asm/irq.h>
-#include <asm/mach/time.h>
-
-/* Use timer 1 as system timer */
-#define TIMER_BASE IMX_TIM1_BASE
-
-static struct clock_event_device clockevent_imx;
-static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t
-imx_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &clockevent_imx;
- uint32_t tstat;
- irqreturn_t ret = IRQ_NONE;
-
- /* clear the interrupt */
- tstat = IMX_TSTAT(TIMER_BASE);
- IMX_TSTAT(TIMER_BASE) = 0;
-
- if (tstat & TSTAT_COMP) {
- evt->event_handler(evt);
- ret = IRQ_HANDLED;
- }
-
- return ret;
-}
-
-static struct irqaction imx_timer_irq = {
- .name = "i.MX Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = imx_timer_interrupt,
-};
-
-/*
- * Set up timer hardware into expected mode and state.
- */
-static void __init imx_timer_hardware_init(void)
-{
- /*
- * Initialise to a known state (all timers off, and timing reset)
- */
- IMX_TCTL(TIMER_BASE) = 0;
- IMX_TPRER(TIMER_BASE) = 0;
-
- IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
-}
-
-cycle_t imx_get_cycles(struct clocksource *cs)
-{
- return IMX_TCN(TIMER_BASE);
-}
-
-static struct clocksource clocksource_imx = {
- .name = "imx_timer1",
- .rating = 200,
- .read = imx_get_cycles,
- .mask = 0xFFFFFFFF,
- .shift = 20,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-static int __init imx_clocksource_init(unsigned long rate)
-{
- clocksource_imx.mult =
- clocksource_hz2mult(rate, clocksource_imx.shift);
- clocksource_register(&clocksource_imx);
-
- return 0;
-}
-
-static int imx_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long tcmp;
-
- tcmp = IMX_TCN(TIMER_BASE) + evt;
- IMX_TCMP(TIMER_BASE) = tcmp;
-
- return (int32_t)(tcmp - IMX_TCN(TIMER_BASE)) < 0 ? -ETIME : 0;
-}
-
-#ifdef DEBUG
-static const char *clock_event_mode_label[]={
- [CLOCK_EVT_MODE_PERIODIC] = "CLOCK_EVT_MODE_PERIODIC",
- [CLOCK_EVT_MODE_ONESHOT] = "CLOCK_EVT_MODE_ONESHOT",
- [CLOCK_EVT_MODE_SHUTDOWN] = "CLOCK_EVT_MODE_SHUTDOWN",
- [CLOCK_EVT_MODE_UNUSED] = "CLOCK_EVT_MODE_UNUSED"
-};
-#endif /*DEBUG*/
-
-static void imx_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
- unsigned long flags;
-
- /*
- * The timer interrupt generation is disabled at least
- * for enough time to call imx_set_next_event()
- */
- local_irq_save(flags);
- /* Disable interrupt in GPT module */
- IMX_TCTL(TIMER_BASE) &= ~TCTL_IRQEN;
- if (mode != clockevent_mode) {
- /* Set event time into far-far future */
- IMX_TCMP(TIMER_BASE) = IMX_TCN(TIMER_BASE) - 3;
- /* Clear pending interrupt */
- IMX_TSTAT(TIMER_BASE) &= ~TSTAT_COMP;
- }
-
-#ifdef DEBUG
- printk(KERN_INFO "imx_set_mode: changing mode from %s to %s\n",
- clock_event_mode_label[clockevent_mode], clock_event_mode_label[mode]);
-#endif /*DEBUG*/
-
- /* Remember timer mode */
- clockevent_mode = mode;
- local_irq_restore(flags);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- printk(KERN_ERR "imx_set_mode: Periodic mode is not supported for i.MX\n");
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /*
- * Do not put overhead of interrupt enable/disable into
- * imx_set_next_event(), the core has about 4 minutes
- * to call imx_set_next_event() or shutdown clock after
- * mode switching
- */
- local_irq_save(flags);
- IMX_TCTL(TIMER_BASE) |= TCTL_IRQEN;
- local_irq_restore(flags);
- break;
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_RESUME:
- /* Left event sources disabled, no more interrupts appears */
- break;
- }
-}
-
-static struct clock_event_device clockevent_imx = {
- .name = "imx_timer1",
- .features = CLOCK_EVT_FEAT_ONESHOT,
- .shift = 32,
- .set_mode = imx_set_mode,
- .set_next_event = imx_set_next_event,
- .rating = 200,
-};
-
-static int __init imx_clockevent_init(unsigned long rate)
-{
- clockevent_imx.mult = div_sc(rate, NSEC_PER_SEC,
- clockevent_imx.shift);
- clockevent_imx.max_delta_ns =
- clockevent_delta2ns(0xfffffffe, &clockevent_imx);
- clockevent_imx.min_delta_ns =
- clockevent_delta2ns(0xf, &clockevent_imx);
-
- clockevent_imx.cpumask = cpumask_of(0);
-
- clockevents_register_device(&clockevent_imx);
-
- return 0;
-}
-
-extern int imx_clocks_init(void);
-
-static void __init imx_timer_init(void)
-{
- struct clk *clk;
- unsigned long rate;
-
- imx_clocks_init();
-
- clk = clk_get(NULL, "perclk1");
- clk_enable(clk);
- rate = clk_get_rate(clk);
-
- imx_timer_hardware_init();
- imx_clocksource_init(rate);
-
- imx_clockevent_init(rate);
-
- /*
- * Make irqs happen for the system timer
- */
- setup_irq(TIM1_INT, &imx_timer_irq);
-}
-
-struct sys_timer imx_timer = {
- .init = imx_timer_init,
-};
IXDP465 Development Platform (Also known as BMP).
For more information on this platform, see <file:Documentation/arm/IXP4xx>.
+config MACH_GORAMO_MLR
+ bool "GORAMO Multi Link Router"
+ help
+ Say 'Y' here if you want your kernel to support GORAMO
+ MultiLink router.
+
config MACH_KIXRP435
bool "KIXRP435"
help
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
--- /dev/null
+/*
+ * Goramo MultiLink router platform code
+ * Copyright (C) 2006-2009 Krzysztof Halasa <khc@pm.waw.pl>
+ */
+
+#include <linux/delay.h>
+#include <linux/hdlc.h>
+#include <linux/i2c-gpio.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <asm/mach-types.h>
+#include <asm/system.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/pci.h>
+
+#define xgpio_irq(n) (IRQ_IXP4XX_GPIO ## n)
+#define gpio_irq(n) xgpio_irq(n)
+
+#define SLOT_ETHA 0x0B /* IDSEL = AD21 */
+#define SLOT_ETHB 0x0C /* IDSEL = AD20 */
+#define SLOT_MPCI 0x0D /* IDSEL = AD19 */
+#define SLOT_NEC 0x0E /* IDSEL = AD18 */
+
+#define IRQ_ETHA IRQ_IXP4XX_GPIO4
+#define IRQ_ETHB IRQ_IXP4XX_GPIO5
+#define IRQ_NEC IRQ_IXP4XX_GPIO3
+#define IRQ_MPCI IRQ_IXP4XX_GPIO12
+
+/* GPIO lines */
+#define GPIO_SCL 0
+#define GPIO_SDA 1
+#define GPIO_STR 2
+#define GPIO_HSS0_DCD_N 6
+#define GPIO_HSS1_DCD_N 7
+#define GPIO_HSS0_CTS_N 10
+#define GPIO_HSS1_CTS_N 11
+#define GPIO_HSS1_RTS_N 13
+#define GPIO_HSS0_RTS_N 14
+
+/* Control outputs from 74HC4094 */
+#define CONTROL_HSS0_CLK_INT 0
+#define CONTROL_HSS1_CLK_INT 1
+#define CONTROL_HSS0_DTR_N 2
+#define CONTROL_HSS1_DTR_N 3
+#define CONTROL_EXT 4
+#define CONTROL_AUTO_RESET 5
+#define CONTROL_PCI_RESET_N 6
+#define CONTROL_EEPROM_WC_N 7
+
+/* offsets from start of flash ROM = 0x50000000 */
+#define CFG_ETH0_ADDRESS 0x40 /* 6 bytes */
+#define CFG_ETH1_ADDRESS 0x46 /* 6 bytes */
+#define CFG_REV 0x4C /* u32 */
+#define CFG_SDRAM_SIZE 0x50 /* u32 */
+#define CFG_SDRAM_CONF 0x54 /* u32 */
+#define CFG_SDRAM_MODE 0x58 /* u32 */
+#define CFG_SDRAM_REFRESH 0x5C /* u32 */
+
+#define CFG_HW_BITS 0x60 /* u32 */
+#define CFG_HW_USB_PORTS 0x00000007 /* 0 = no NEC chip, 1-5 = ports # */
+#define CFG_HW_HAS_PCI_SLOT 0x00000008
+#define CFG_HW_HAS_ETH0 0x00000010
+#define CFG_HW_HAS_ETH1 0x00000020
+#define CFG_HW_HAS_HSS0 0x00000040
+#define CFG_HW_HAS_HSS1 0x00000080
+#define CFG_HW_HAS_UART0 0x00000100
+#define CFG_HW_HAS_UART1 0x00000200
+#define CFG_HW_HAS_EEPROM 0x00000400
+
+#define FLASH_CMD_READ_ARRAY 0xFF
+#define FLASH_CMD_READ_ID 0x90
+#define FLASH_SER_OFF 0x102 /* 0x81 in 16-bit mode */
+
+static u32 hw_bits = 0xFFFFFFFD; /* assume all hardware present */;
+static u8 control_value;
+
+static void set_scl(u8 value)
+{
+ gpio_line_set(GPIO_SCL, !!value);
+ udelay(3);
+}
+
+static void set_sda(u8 value)
+{
+ gpio_line_set(GPIO_SDA, !!value);
+ udelay(3);
+}
+
+static void set_str(u8 value)
+{
+ gpio_line_set(GPIO_STR, !!value);
+ udelay(3);
+}
+
+static inline void set_control(int line, int value)
+{
+ if (value)
+ control_value |= (1 << line);
+ else
+ control_value &= ~(1 << line);
+}
+
+
+static void output_control(void)
+{
+ int i;
+
+ gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+
+ for (i = 0; i < 8; i++) {
+ set_scl(0);
+ set_sda(control_value & (0x80 >> i)); /* MSB first */
+ set_scl(1); /* active edge */
+ }
+
+ set_str(1);
+ set_str(0);
+
+ set_scl(0);
+ set_sda(1); /* Be ready for START */
+ set_scl(1);
+}
+
+
+static void (*set_carrier_cb_tab[2])(void *pdev, int carrier);
+
+static int hss_set_clock(int port, unsigned int clock_type)
+{
+ int ctrl_int = port ? CONTROL_HSS1_CLK_INT : CONTROL_HSS0_CLK_INT;
+
+ switch (clock_type) {
+ case CLOCK_DEFAULT:
+ case CLOCK_EXT:
+ set_control(ctrl_int, 0);
+ output_control();
+ return CLOCK_EXT;
+
+ case CLOCK_INT:
+ set_control(ctrl_int, 1);
+ output_control();
+ return CLOCK_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static irqreturn_t hss_dcd_irq(int irq, void *pdev)
+{
+ int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+ gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+ set_carrier_cb_tab[port](pdev, !i);
+ return IRQ_HANDLED;
+}
+
+
+static int hss_open(int port, void *pdev,
+ void (*set_carrier_cb)(void *pdev, int carrier))
+{
+ int i, irq;
+
+ if (!port)
+ irq = gpio_irq(GPIO_HSS0_DCD_N);
+ else
+ irq = gpio_irq(GPIO_HSS1_DCD_N);
+
+ gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
+ set_carrier_cb(pdev, !i);
+
+ set_carrier_cb_tab[!!port] = set_carrier_cb;
+
+ if ((i = request_irq(irq, hss_dcd_irq, 0, "IXP4xx HSS", pdev)) != 0) {
+ printk(KERN_ERR "ixp4xx_hss: failed to request IRQ%i (%i)\n",
+ irq, i);
+ return i;
+ }
+
+ set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 0);
+ output_control();
+ gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 0);
+ return 0;
+}
+
+static void hss_close(int port, void *pdev)
+{
+ free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
+ pdev);
+ set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
+
+ set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
+ output_control();
+ gpio_line_set(port ? GPIO_HSS1_RTS_N : GPIO_HSS0_RTS_N, 1);
+}
+
+
+/* Flash memory */
+static struct flash_platform_data flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device device_flash = {
+ .name = "IXP4XX-Flash",
+ .id = 0,
+ .dev = { .platform_data = &flash_data },
+ .num_resources = 1,
+ .resource = &flash_resource,
+};
+
+
+/* I^2C interface */
+static struct i2c_gpio_platform_data i2c_data = {
+ .sda_pin = GPIO_SDA,
+ .scl_pin = GPIO_SCL,
+};
+
+static struct platform_device device_i2c = {
+ .name = "i2c-gpio",
+ .id = 0,
+ .dev = { .platform_data = &i2c_data },
+};
+
+
+/* IXP425 2 UART ports */
+static struct resource uart_resources[] = {
+ {
+ .start = IXP4XX_UART1_BASE_PHYS,
+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IXP4XX_UART2_BASE_PHYS,
+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct plat_serial8250_port uart_data[] = {
+ {
+ .mapbase = IXP4XX_UART1_BASE_PHYS,
+ .membase = (char __iomem *)IXP4XX_UART1_BASE_VIRT +
+ REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ {
+ .mapbase = IXP4XX_UART2_BASE_PHYS,
+ .membase = (char __iomem *)IXP4XX_UART2_BASE_VIRT +
+ REG_OFFSET,
+ .irq = IRQ_IXP4XX_UART2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ .uartclk = IXP4XX_UART_XTAL,
+ },
+ { },
+};
+
+static struct platform_device device_uarts = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev.platform_data = uart_data,
+ .num_resources = 2,
+ .resource = uart_resources,
+};
+
+
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info eth_plat[] = {
+ {
+ .phy = 0,
+ .rxq = 3,
+ .txreadyq = 32,
+ }, {
+ .phy = 1,
+ .rxq = 4,
+ .txreadyq = 33,
+ }
+};
+
+static struct platform_device device_eth_tab[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = eth_plat,
+ }, {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEC,
+ .dev.platform_data = eth_plat + 1,
+ }
+};
+
+
+/* IXP425 2 synchronous serial ports */
+static struct hss_plat_info hss_plat[] = {
+ {
+ .set_clock = hss_set_clock,
+ .open = hss_open,
+ .close = hss_close,
+ .txreadyq = 34,
+ }, {
+ .set_clock = hss_set_clock,
+ .open = hss_open,
+ .close = hss_close,
+ .txreadyq = 35,
+ }
+};
+
+static struct platform_device device_hss_tab[] = {
+ {
+ .name = "ixp4xx_hss",
+ .id = 0,
+ .dev.platform_data = hss_plat,
+ }, {
+ .name = "ixp4xx_hss",
+ .id = 1,
+ .dev.platform_data = hss_plat + 1,
+ }
+};
+
+
+static struct platform_device *device_tab[6] __initdata = {
+ &device_flash, /* index 0 */
+};
+
+static inline u8 __init flash_readb(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+ return __raw_readb(flash + addr);
+#else
+ return __raw_readb(flash + (addr ^ 3));
+#endif
+}
+
+static inline u16 __init flash_readw(u8 __iomem *flash, u32 addr)
+{
+#ifdef __ARMEB__
+ return __raw_readw(flash + addr);
+#else
+ return __raw_readw(flash + (addr ^ 2));
+#endif
+}
+
+static void __init gmlr_init(void)
+{
+ u8 __iomem *flash;
+ int i, devices = 1; /* flash */
+
+ ixp4xx_sys_init();
+
+ if ((flash = ioremap(IXP4XX_EXP_BUS_BASE_PHYS, 0x80)) == NULL)
+ printk(KERN_ERR "goramo-mlr: unable to access system"
+ " configuration data\n");
+ else {
+ system_rev = __raw_readl(flash + CFG_REV);
+ hw_bits = __raw_readl(flash + CFG_HW_BITS);
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ eth_plat[0].hwaddr[i] =
+ flash_readb(flash, CFG_ETH0_ADDRESS + i);
+ eth_plat[1].hwaddr[i] =
+ flash_readb(flash, CFG_ETH1_ADDRESS + i);
+ }
+
+ __raw_writew(FLASH_CMD_READ_ID, flash);
+ system_serial_high = flash_readw(flash, FLASH_SER_OFF);
+ system_serial_high <<= 16;
+ system_serial_high |= flash_readw(flash, FLASH_SER_OFF + 2);
+ system_serial_low = flash_readw(flash, FLASH_SER_OFF + 4);
+ system_serial_low <<= 16;
+ system_serial_low |= flash_readw(flash, FLASH_SER_OFF + 6);
+ __raw_writew(FLASH_CMD_READ_ARRAY, flash);
+
+ iounmap(flash);
+ }
+
+ switch (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1)) {
+ case CFG_HW_HAS_UART0:
+ memset(&uart_data[1], 0, sizeof(uart_data[1]));
+ device_uarts.num_resources = 1;
+ break;
+
+ case CFG_HW_HAS_UART1:
+ device_uarts.dev.platform_data = &uart_data[1];
+ device_uarts.resource = &uart_resources[1];
+ device_uarts.num_resources = 1;
+ break;
+ }
+ if (hw_bits & (CFG_HW_HAS_UART0 | CFG_HW_HAS_UART1))
+ device_tab[devices++] = &device_uarts; /* max index 1 */
+
+ if (hw_bits & CFG_HW_HAS_ETH0)
+ device_tab[devices++] = &device_eth_tab[0]; /* max index 2 */
+ if (hw_bits & CFG_HW_HAS_ETH1)
+ device_tab[devices++] = &device_eth_tab[1]; /* max index 3 */
+
+ if (hw_bits & CFG_HW_HAS_HSS0)
+ device_tab[devices++] = &device_hss_tab[0]; /* max index 4 */
+ if (hw_bits & CFG_HW_HAS_HSS1)
+ device_tab[devices++] = &device_hss_tab[1]; /* max index 5 */
+
+ if (hw_bits & CFG_HW_HAS_EEPROM)
+ device_tab[devices++] = &device_i2c; /* max index 6 */
+
+ gpio_line_config(GPIO_SCL, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_SDA, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_STR, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_HSS0_RTS_N, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
+ gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
+ gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
+ set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+ set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+
+ set_control(CONTROL_HSS0_DTR_N, 1);
+ set_control(CONTROL_HSS1_DTR_N, 1);
+ set_control(CONTROL_EEPROM_WC_N, 1);
+ set_control(CONTROL_PCI_RESET_N, 1);
+ output_control();
+
+ msleep(1); /* Wait for PCI devices to initialize */
+
+ flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
+ flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
+
+ platform_add_devices(device_tab, devices);
+}
+
+
+#ifdef CONFIG_PCI
+static void __init gmlr_pci_preinit(void)
+{
+ set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
+ set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+ ixp4xx_pci_preinit();
+}
+
+static void __init gmlr_pci_postinit(void)
+{
+ if ((hw_bits & CFG_HW_USB_PORTS) >= 2 &&
+ (hw_bits & CFG_HW_USB_PORTS) < 5) {
+ /* need to adjust number of USB ports on NEC chip */
+ u32 value, addr = BIT(32 - SLOT_NEC) | 0xE0;
+ if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) {
+ value &= ~7;
+ value |= (hw_bits & CFG_HW_USB_PORTS);
+ ixp4xx_pci_write(addr, NP_CMD_CONFIGWRITE, value);
+ }
+ }
+}
+
+static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+ switch(slot) {
+ case SLOT_ETHA: return IRQ_ETHA;
+ case SLOT_ETHB: return IRQ_ETHB;
+ case SLOT_NEC: return IRQ_NEC;
+ default: return IRQ_MPCI;
+ }
+}
+
+static struct hw_pci gmlr_hw_pci __initdata = {
+ .nr_controllers = 1,
+ .preinit = gmlr_pci_preinit,
+ .postinit = gmlr_pci_postinit,
+ .swizzle = pci_std_swizzle,
+ .setup = ixp4xx_setup,
+ .scan = ixp4xx_scan_bus,
+ .map_irq = gmlr_map_irq,
+};
+
+static int __init gmlr_pci_init(void)
+{
+ if (machine_is_goramo_mlr() &&
+ (hw_bits & (CFG_HW_USB_PORTS | CFG_HW_HAS_PCI_SLOT)))
+ pci_common_init(&gmlr_hw_pci);
+ return 0;
+}
+
+subsys_initcall(gmlr_pci_init);
+#endif /* CONFIG_PCI */
+
+
+MACHINE_START(GORAMO_MLR, "MultiLink")
+ /* Maintainer: Krzysztof Halasa */
+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xFFFC,
+ .map_io = ixp4xx_map_io,
+ .init_irq = ixp4xx_init_irq,
+ .timer = &ixp4xx_timer,
+ .boot_params = 0x0100,
+ .init_machine = gmlr_init,
+MACHINE_END
#define IXP46X_PROCESSOR_ID_VALUE 0x69054200 /* including IXP455 */
#define IXP46X_PROCESSOR_ID_MASK 0xfffffff0
+#define cpu_is_ixp42x_rev_a0() ((read_cpuid_id() & (IXP42X_PROCESSOR_ID_MASK | 0xF)) == \
+ IXP42X_PROCESSOR_ID_VALUE)
#define cpu_is_ixp42x() ((read_cpuid_id() & IXP42X_PROCESSOR_ID_MASK) == \
IXP42X_PROCESSOR_ID_VALUE)
#define cpu_is_ixp43x() ((read_cpuid_id() & IXP43X_PROCESSOR_ID_MASK) == \
static inline u32 ixp4xx_read_feature_bits(void)
{
- unsigned int val = ~*IXP4XX_EXP_CFG2;
+ u32 val = ~*IXP4XX_EXP_CFG2;
+ if (cpu_is_ixp42x_rev_a0())
+ return IXP42X_FEATURE_MASK & ~(IXP4XX_FEATURE_RCOMP |
+ IXP4XX_FEATURE_AES);
if (cpu_is_ixp42x())
return val & IXP42X_FEATURE_MASK;
if (cpu_is_ixp43x())
#define DEBUG_QMGR 0
#define HALF_QUEUES 32
-#define QUEUES 64 /* only 32 lower queues currently supported */
+#define QUEUES 64
#define MAX_QUEUE_LENGTH 4 /* in dwords */
#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
return val;
}
-static inline int qmgr_get_stat1(unsigned int queue)
+static inline int __qmgr_get_stat1(unsigned int queue)
{
extern struct qmgr_regs __iomem *qmgr_regs;
return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
>> ((queue & 7) << 2)) & 0xF;
}
-static inline int qmgr_get_stat2(unsigned int queue)
+static inline int __qmgr_get_stat2(unsigned int queue)
{
extern struct qmgr_regs __iomem *qmgr_regs;
+ BUG_ON(queue >= HALF_QUEUES);
return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
>> ((queue & 0xF) << 1)) & 0x3;
}
+/**
+ * qmgr_stat_empty() - checks if a hardware queue is empty
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is empty.
+ */
static inline int qmgr_stat_empty(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
+ BUG_ON(queue >= HALF_QUEUES);
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY;
}
-static inline int qmgr_stat_nearly_empty(unsigned int queue)
+/**
+ * qmgr_stat_below_low_watermark() - checks if a queue is below low watermark
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is below low watermark.
+ */
+static inline int qmgr_stat_below_low_watermark(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
+ extern struct qmgr_regs __iomem *qmgr_regs;
+ if (queue >= HALF_QUEUES)
+ return (__raw_readl(&qmgr_regs->statne_h) >>
+ (queue - HALF_QUEUES)) & 0x01;
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY;
}
-static inline int qmgr_stat_nearly_full(unsigned int queue)
+/**
+ * qmgr_stat_above_high_watermark() - checks if a queue is above high watermark
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is above high watermark
+ */
+static inline int qmgr_stat_above_high_watermark(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
+ BUG_ON(queue >= HALF_QUEUES);
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL;
}
+/**
+ * qmgr_stat_full() - checks if a hardware queue is full
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue is full.
+ */
static inline int qmgr_stat_full(unsigned int queue)
{
- return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
+ extern struct qmgr_regs __iomem *qmgr_regs;
+ if (queue >= HALF_QUEUES)
+ return (__raw_readl(&qmgr_regs->statf_h) >>
+ (queue - HALF_QUEUES)) & 0x01;
+ return __qmgr_get_stat1(queue) & QUEUE_STAT1_FULL;
}
+/**
+ * qmgr_stat_underflow() - checks if a hardware queue experienced underflow
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue experienced underflow.
+ */
static inline int qmgr_stat_underflow(unsigned int queue)
{
- return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
+ return __qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW;
}
+/**
+ * qmgr_stat_overflow() - checks if a hardware queue experienced overflow
+ * @queue: queue number
+ *
+ * Returns non-zero value if the queue experienced overflow.
+ */
static inline int qmgr_stat_overflow(unsigned int queue)
{
- return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
+ return __qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW;
}
#endif
/* reset the NPE */
ixp4xx_write_feature_bits(val &
~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
- for (i = 0; i < MAX_RETRIES; i++) {
- if (!(ixp4xx_read_feature_bits() &
- (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
- break; /* reset completed */
- udelay(1);
- }
- if (i == MAX_RETRIES)
- return -ETIMEDOUT;
-
/* deassert reset */
ixp4xx_write_feature_bits(val |
(IXP4XX_FEATURE_RESET_NPEA << npe->id));
static struct resource *mem_res;
static spinlock_t qmgr_lock;
static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
-static void (*irq_handlers[HALF_QUEUES])(void *pdev);
-static void *irq_pdevs[HALF_QUEUES];
+static void (*irq_handlers[QUEUES])(void *pdev);
+static void *irq_pdevs[QUEUES];
#if DEBUG_QMGR
char qmgr_queue_descs[QUEUES][32];
void qmgr_set_irq(unsigned int queue, int src,
void (*handler)(void *pdev), void *pdev)
{
- u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
- int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
unsigned long flags;
- src &= 7;
spin_lock_irqsave(&qmgr_lock, flags);
- __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
+ if (queue < HALF_QUEUES) {
+ u32 __iomem *reg;
+ int bit;
+ BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL);
+ reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */
+ bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
+ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit),
+ reg);
+ } else
+ /* IRQ source for queues 32-63 is fixed */
+ BUG_ON(src != QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY);
+
irq_handlers[queue] = handler;
irq_pdevs[queue] = pdev;
spin_unlock_irqrestore(&qmgr_lock, flags);
}
-static irqreturn_t qmgr_irq1(int irq, void *pdev)
+static irqreturn_t qmgr_irq1_a0(int irq, void *pdev)
{
- int i;
- u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
- __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
-
- for (i = 0; i < HALF_QUEUES; i++)
- if (val & (1 << i))
+ int i, ret = 0;
+ u32 en_bitmap, src, stat;
+
+ /* ACK - it may clear any bits so don't rely on it */
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[0]);
+
+ en_bitmap = qmgr_regs->irqen[0];
+ while (en_bitmap) {
+ i = __fls(en_bitmap); /* number of the last "low" queue */
+ en_bitmap &= ~BIT(i);
+ src = qmgr_regs->irqsrc[i >> 3];
+ stat = qmgr_regs->stat1[i >> 3];
+ if (src & 4) /* the IRQ condition is inverted */
+ stat = ~stat;
+ if (stat & BIT(src & 3)) {
irq_handlers[i](irq_pdevs[i]);
+ ret = IRQ_HANDLED;
+ }
+ }
+ return ret;
+}
+
+
+static irqreturn_t qmgr_irq2_a0(int irq, void *pdev)
+{
+ int i, ret = 0;
+ u32 req_bitmap;
+
+ /* ACK - it may clear any bits so don't rely on it */
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[1]);
+
+ req_bitmap = qmgr_regs->irqen[1] & qmgr_regs->statne_h;
+ while (req_bitmap) {
+ i = __fls(req_bitmap); /* number of the last "high" queue */
+ req_bitmap &= ~BIT(i);
+ irq_handlers[HALF_QUEUES + i](irq_pdevs[HALF_QUEUES + i]);
+ ret = IRQ_HANDLED;
+ }
+ return ret;
+}
- return val ? IRQ_HANDLED : 0;
+
+static irqreturn_t qmgr_irq(int irq, void *pdev)
+{
+ int i, half = (irq == IRQ_IXP4XX_QM1 ? 0 : 1);
+ u32 req_bitmap = __raw_readl(&qmgr_regs->irqstat[half]);
+
+ if (!req_bitmap)
+ return 0;
+ __raw_writel(req_bitmap, &qmgr_regs->irqstat[half]); /* ACK */
+
+ while (req_bitmap) {
+ i = __fls(req_bitmap); /* number of the last queue */
+ req_bitmap &= ~BIT(i);
+ i += half * HALF_QUEUES;
+ irq_handlers[i](irq_pdevs[i]);
+ }
+ return IRQ_HANDLED;
}
void qmgr_enable_irq(unsigned int queue)
{
unsigned long flags;
+ int half = queue / 32;
+ u32 mask = 1 << (queue & (HALF_QUEUES - 1));
spin_lock_irqsave(&qmgr_lock, flags);
- __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
- &qmgr_regs->irqen[0]);
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) | mask,
+ &qmgr_regs->irqen[half]);
spin_unlock_irqrestore(&qmgr_lock, flags);
}
void qmgr_disable_irq(unsigned int queue)
{
unsigned long flags;
+ int half = queue / 32;
+ u32 mask = 1 << (queue & (HALF_QUEUES - 1));
spin_lock_irqsave(&qmgr_lock, flags);
- __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
- &qmgr_regs->irqen[0]);
- __raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[half]) & ~mask,
+ &qmgr_regs->irqen[half]);
+ __raw_writel(mask, &qmgr_regs->irqstat[half]); /* clear */
spin_unlock_irqrestore(&qmgr_lock, flags);
}
u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
int err;
- if (queue >= HALF_QUEUES)
- return -ERANGE;
+ BUG_ON(queue >= QUEUES);
if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
return -EINVAL;
{
u32 cfg, addr, mask[4];
- BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
+ BUG_ON(queue >= QUEUES); /* not in valid range */
spin_lock_irq(&qmgr_lock);
cfg = __raw_readl(&qmgr_regs->sram[queue]);
static int qmgr_init(void)
{
int i, err;
+ irq_handler_t handler1, handler2;
+
mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
IXP4XX_QMGR_REGION_SIZE,
"IXP4xx Queue Manager");
__raw_writel(0, &qmgr_regs->irqen[i]);
}
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->statne_h);
+ __raw_writel(0, &qmgr_regs->statf_h);
+
for (i = 0; i < QUEUES; i++)
__raw_writel(0, &qmgr_regs->sram[i]);
- err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
- "IXP4xx Queue Manager", NULL);
+ if (cpu_is_ixp42x_rev_a0()) {
+ handler1 = qmgr_irq1_a0;
+ handler2 = qmgr_irq2_a0;
+ } else
+ handler1 = handler2 = qmgr_irq;
+
+ err = request_irq(IRQ_IXP4XX_QM1, handler1, 0, "IXP4xx Queue Manager",
+ NULL);
if (err) {
- printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
- IRQ_IXP4XX_QM1);
+ printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+ IRQ_IXP4XX_QM1, err);
goto error_irq;
}
+ err = request_irq(IRQ_IXP4XX_QM2, handler2, 0, "IXP4xx Queue Manager",
+ NULL);
+ if (err) {
+ printk(KERN_ERR "qmgr: failed to request IRQ%i (%i)\n",
+ IRQ_IXP4XX_QM2, err);
+ goto error_irq2;
+ }
+
used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
spin_lock_init(&qmgr_lock);
printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
return 0;
+error_irq2:
+ free_irq(IRQ_IXP4XX_QM1, NULL);
error_irq:
iounmap(qmgr_regs);
error_map:
static void qmgr_remove(void)
{
free_irq(IRQ_IXP4XX_QM1, NULL);
+ free_irq(IRQ_IXP4XX_QM2, NULL);
synchronize_irq(IRQ_IXP4XX_QM1);
+ synchronize_irq(IRQ_IXP4XX_QM2);
iounmap(qmgr_regs);
release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
}
Say 'Y' here if you want your kernel to support the
Marvell RD-88F6281 Reference Board.
+config MACH_MV88F6281GTW_GE
+ bool "Marvell 88F6281 GTW GE Board"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Marvell 88F6281 GTW GE Board.
+
config MACH_SHEEVAPLUG
bool "Marvell SheevaPlug Reference Board"
help
obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o
obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o
obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
+obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o
+
+obj-$(CONFIG_CPU_IDLE) += cpuidle.o
*/
#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
+#define TARGET_SRAM 3
#define TARGET_PCIE 4
#define ATTR_DEV_SPI_ROM 0x1e
#define ATTR_DEV_BOOT 0x1d
#define ATTR_DEV_CS0 0x3e
#define ATTR_PCIE_IO 0xe0
#define ATTR_PCIE_MEM 0xe8
+#define ATTR_SRAM 0x01
/*
* Helpers to get DDR bank info
struct mbus_dram_target_info kirkwood_mbus_dram_info;
-static int __initdata win_alloc_count;
static int __init cpu_win_can_remap(int win)
{
setup_cpu_win(2, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
- win_alloc_count = 3;
+ /*
+ * Setup window for SRAM.
+ */
+ setup_cpu_win(3, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+ TARGET_SRAM, ATTR_SRAM, -1);
/*
* Setup MBUS dram target info.
}
kirkwood_mbus_dram_info.num_cs = cs;
}
-
-void __init kirkwood_setup_sram_win(u32 base, u32 size)
-{
- setup_cpu_win(win_alloc_count++, base, size, 0x03, 0x00, -1);
-}
#include <linux/mv643xx_eth.h>
#include <linux/mv643xx_i2c.h>
#include <linux/ata_platform.h>
+#include <linux/mtd/nand.h>
#include <linux/spi/orion_spi.h>
#include <net/dsa.h>
#include <asm/page.h>
#include <plat/mvsdio.h>
#include <plat/mv_xor.h>
#include <plat/orion_nand.h>
+#include <plat/orion_wdt.h>
#include <plat/time.h>
#include "common.h"
iotable_init(kirkwood_io_desc, ARRAY_SIZE(kirkwood_io_desc));
}
+/*
+ * Default clock control bits. Any bit _not_ set in this variable
+ * will be cleared from the hardware after platform devices have been
+ * registered. Some reserved bits must be set to 1.
+ */
+unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
+
/*****************************************************************************
* EHCI
void __init kirkwood_ehci_init(void)
{
+ kirkwood_clk_ctrl |= CGC_USB0;
platform_device_register(&kirkwood_ehci);
}
.id = 0,
.num_resources = 1,
.resource = kirkwood_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
{
+ kirkwood_clk_ctrl |= CGC_GE0;
eth_data->shared = &kirkwood_ge00_shared;
kirkwood_ge00.dev.platform_data = eth_data;
.id = 1,
.num_resources = 1,
.resource = kirkwood_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
{
+ kirkwood_clk_ctrl |= CGC_GE1;
eth_data->shared = &kirkwood_ge01_shared;
kirkwood_ge01.dev.platform_data = eth_data;
}
+/*****************************************************************************
+ * NAND flash
+ ****************************************************************************/
+static struct resource kirkwood_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data kirkwood_nand_data = {
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+};
+
+static struct platform_device kirkwood_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &kirkwood_nand_data,
+ },
+ .resource = &kirkwood_nand_resource,
+ .num_resources = 1,
+};
+
+void __init kirkwood_nand_init(struct mtd_partition *parts, int nr_parts,
+ int chip_delay)
+{
+ kirkwood_clk_ctrl |= CGC_RUNIT;
+ kirkwood_nand_data.parts = parts;
+ kirkwood_nand_data.nr_parts = nr_parts;
+ kirkwood_nand_data.chip_delay = chip_delay;
+ platform_device_register(&kirkwood_nand_flash);
+}
+
+
/*****************************************************************************
* SoC RTC
****************************************************************************/
void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data)
{
+ kirkwood_clk_ctrl |= CGC_SATA0;
+ if (sata_data->n_ports > 1)
+ kirkwood_clk_ctrl |= CGC_SATA1;
sata_data->dram = &kirkwood_mbus_dram_info;
kirkwood_sata.dev.platform_data = sata_data;
platform_device_register(&kirkwood_sata);
else
mvsdio_data->clock = 200000000;
mvsdio_data->dram = &kirkwood_mbus_dram_info;
+ kirkwood_clk_ctrl |= CGC_SDIO;
kirkwood_sdio.dev.platform_data = mvsdio_data;
platform_device_register(&kirkwood_sdio);
}
void __init kirkwood_spi_init()
{
+ kirkwood_clk_ctrl |= CGC_RUNIT;
platform_device_register(&kirkwood_spi);
}
static struct resource kirkwood_i2c_resources[] = {
{
- .name = "i2c",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c",
.start = IRQ_KIRKWOOD_TWSI,
.end = IRQ_KIRKWOOD_TWSI,
.flags = IORESOURCE_IRQ,
}
+/*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+
+static struct resource kirkwood_crypto_res[] = {
+ {
+ .name = "regs",
+ .start = CRYPTO_PHYS_BASE,
+ .end = CRYPTO_PHYS_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sram",
+ .start = KIRKWOOD_SRAM_PHYS_BASE,
+ .end = KIRKWOOD_SRAM_PHYS_BASE + KIRKWOOD_SRAM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "crypto interrupt",
+ .start = IRQ_KIRKWOOD_CRYPTO,
+ .end = IRQ_KIRKWOOD_CRYPTO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device kirkwood_crypto_device = {
+ .name = "mv_crypto",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(kirkwood_crypto_res),
+ .resource = kirkwood_crypto_res,
+};
+
+void __init kirkwood_crypto_init(void)
+{
+ kirkwood_clk_ctrl |= CGC_CRYPTO;
+ platform_device_register(&kirkwood_crypto_device);
+}
+
+
/*****************************************************************************
* XOR
****************************************************************************/
static void __init kirkwood_xor0_init(void)
{
+ kirkwood_clk_ctrl |= CGC_XOR0;
platform_device_register(&kirkwood_xor0_shared);
/*
static void __init kirkwood_xor1_init(void)
{
+ kirkwood_clk_ctrl |= CGC_XOR1;
platform_device_register(&kirkwood_xor1_shared);
/*
}
+/*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct orion_wdt_platform_data kirkwood_wdt_data = {
+ .tclk = 0,
+};
+
+static struct platform_device kirkwood_wdt_device = {
+ .name = "orion_wdt",
+ .id = -1,
+ .dev = {
+ .platform_data = &kirkwood_wdt_data,
+ },
+ .num_resources = 0,
+};
+
+static void __init kirkwood_wdt_init(void)
+{
+ kirkwood_wdt_data.tclk = kirkwood_tclk;
+ platform_device_register(&kirkwood_wdt_device);
+}
+
+
/*****************************************************************************
* Time handling
****************************************************************************/
/* internal devices that every board has */
kirkwood_rtc_init();
+ kirkwood_wdt_init();
kirkwood_xor0_init();
kirkwood_xor1_init();
+ kirkwood_crypto_init();
+}
+
+static int __init kirkwood_clock_gate(void)
+{
+ unsigned int curr = readl(CLOCK_GATING_CTRL);
+
+ printk(KERN_DEBUG "Gating clock of unused units\n");
+ printk(KERN_DEBUG "before: 0x%08x\n", curr);
+
+ /* Make sure those units are accessible */
+ writel(curr | CGC_SATA0 | CGC_SATA1 | CGC_PEX0, CLOCK_GATING_CTRL);
+
+ /* For SATA: first shutdown the phy */
+ if (!(kirkwood_clk_ctrl & CGC_SATA0)) {
+ /* Disable PLL and IVREF */
+ writel(readl(SATA0_PHY_MODE_2) & ~0xf, SATA0_PHY_MODE_2);
+ /* Disable PHY */
+ writel(readl(SATA0_IF_CTRL) | 0x200, SATA0_IF_CTRL);
+ }
+ if (!(kirkwood_clk_ctrl & CGC_SATA1)) {
+ /* Disable PLL and IVREF */
+ writel(readl(SATA1_PHY_MODE_2) & ~0xf, SATA1_PHY_MODE_2);
+ /* Disable PHY */
+ writel(readl(SATA1_IF_CTRL) | 0x200, SATA1_IF_CTRL);
+ }
+
+ /* For PCIe: first shutdown the phy */
+ if (!(kirkwood_clk_ctrl & CGC_PEX0)) {
+ writel(readl(PCIE_LINK_CTRL) | 0x10, PCIE_LINK_CTRL);
+ while (1)
+ if (readl(PCIE_STATUS) & 0x1)
+ break;
+ writel(readl(PCIE_LINK_CTRL) & ~0x10, PCIE_LINK_CTRL);
+ }
+
+ /* Now gate clock the required units */
+ writel(kirkwood_clk_ctrl, CLOCK_GATING_CTRL);
+ printk(KERN_DEBUG " after: 0x%08x\n", readl(CLOCK_GATING_CTRL));
+
+ return 0;
}
+late_initcall(kirkwood_clock_gate);
struct mv643xx_eth_platform_data;
struct mv_sata_platform_data;
struct mvsdio_platform_data;
+struct mtd_partition;
/*
* Basic Kirkwood init functions used early by machine-setup.
extern struct mbus_dram_target_info kirkwood_mbus_dram_info;
void kirkwood_setup_cpu_mbus(void);
-void kirkwood_setup_sram_win(u32 base, u32 size);
void kirkwood_pcie_id(u32 *dev, u32 *rev);
void kirkwood_i2c_init(void);
void kirkwood_uart0_init(void);
void kirkwood_uart1_init(void);
+void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
extern int kirkwood_tclk;
extern struct sys_timer kirkwood_timer;
+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
#endif
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle Marvell Kirkwood SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and DDR self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and DDR self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+#include <mach/kirkwood.h>
+
+#define KIRKWOOD_MAX_STATES 2
+
+static struct cpuidle_driver kirkwood_idle_driver = {
+ .name = "kirkwood_idle",
+ .owner = THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, kirkwood_cpuidle_device);
+
+/* Actual code that puts the SoC in different idle states */
+static int kirkwood_enter_idle(struct cpuidle_device *dev,
+ struct cpuidle_state *state)
+{
+ struct timeval before, after;
+ int idle_time;
+
+ local_irq_disable();
+ do_gettimeofday(&before);
+ if (state == &dev->states[0])
+ /* Wait for interrupt state */
+ cpu_do_idle();
+ else if (state == &dev->states[1]) {
+ /*
+ * Following write will put DDR in self refresh.
+ * Note that we have 256 cycles before DDR puts it
+ * self in self-refresh, so the wait-for-interrupt
+ * call afterwards won't get the DDR from self refresh
+ * mode.
+ */
+ writel(0x7, DDR_OPERATION_BASE);
+ cpu_do_idle();
+ }
+ do_gettimeofday(&after);
+ local_irq_enable();
+ idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+ (after.tv_usec - before.tv_usec);
+ return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int kirkwood_init_cpuidle(void)
+{
+ struct cpuidle_device *device;
+
+ cpuidle_register_driver(&kirkwood_idle_driver);
+
+ device = &per_cpu(kirkwood_cpuidle_device, smp_processor_id());
+ device->state_count = KIRKWOOD_MAX_STATES;
+
+ /* Wait for interrupt state */
+ device->states[0].enter = kirkwood_enter_idle;
+ device->states[0].exit_latency = 1;
+ device->states[0].target_residency = 10000;
+ device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[0].name, "WFI");
+ strcpy(device->states[0].desc, "Wait for interrupt");
+
+ /* Wait for interrupt and DDR self refresh state */
+ device->states[1].enter = kirkwood_enter_idle;
+ device->states[1].exit_latency = 10;
+ device->states[1].target_residency = 10000;
+ device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+ strcpy(device->states[1].name, "DDR SR");
+ strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+
+ if (cpuidle_register_device(device)) {
+ printk(KERN_ERR "kirkwood_init_cpuidle: Failed registering\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+device_initcall(kirkwood_init_cpuidle);
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
-#include <plat/orion_nand.h>
#include <plat/mvsdio.h>
#include "common.h"
#include "mpp.h"
},
};
-static struct resource db88f6281_nand_resource = {
- .flags = IORESOURCE_MEM,
- .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
- .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
- KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data db88f6281_nand_data = {
- .parts = db88f6281_nand_parts,
- .nr_parts = ARRAY_SIZE(db88f6281_nand_parts),
- .cle = 0,
- .ale = 1,
- .width = 8,
- .chip_delay = 25,
-};
-
-static struct platform_device db88f6281_nand_flash = {
- .name = "orion_nand",
- .id = -1,
- .dev = {
- .platform_data = &db88f6281_nand_data,
- },
- .resource = &db88f6281_nand_resource,
- .num_resources = 1,
-};
-
static struct mv643xx_eth_platform_data db88f6281_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
kirkwood_init();
kirkwood_mpp_conf(db88f6281_mpp_config);
+ kirkwood_nand_init(ARRAY_AND_SIZE(db88f6281_nand_parts), 25);
kirkwood_ehci_init();
kirkwood_ge00_init(&db88f6281_ge00_data);
kirkwood_sata_init(&db88f6281_sata_data);
kirkwood_uart0_init();
kirkwood_sdio_init(&db88f6281_mvsdio_data);
-
- platform_device_register(&db88f6281_nand_flash);
}
static int __init db88f6281_pci_init(void)
#define CPU_RESET 0x00000002
#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define WDT_RESET_OUT_EN 0x00000002
#define SOFT_RESET_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
#define SOFT_RESET 0x00000001
#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define WDT_INT_REQ 0x0008
+
#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
#define BRIDGE_INT_TIMER0 0x0002
#define BRIDGE_INT_TIMER1 0x0004
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
+#define CLOCK_GATING_CTRL (BRIDGE_VIRT_BASE | 0x11c)
+#define CGC_GE0 (1 << 0)
+#define CGC_PEX0 (1 << 2)
+#define CGC_USB0 (1 << 3)
+#define CGC_SDIO (1 << 4)
+#define CGC_TSU (1 << 5)
+#define CGC_DUNIT (1 << 6)
+#define CGC_RUNIT (1 << 7)
+#define CGC_XOR0 (1 << 8)
+#define CGC_AUDIO (1 << 9)
+#define CGC_SATA0 (1 << 14)
+#define CGC_SATA1 (1 << 15)
+#define CGC_XOR1 (1 << 16)
+#define CGC_CRYPTO (1 << 17)
+#define CGC_GE1 (1 << 19)
+#define CGC_TDM (1 << 20)
+#define CGC_RESERVED ((1 << 18) | (0x6 << 21))
+
#endif
+ KIRKWOOD_PCIE_IO_VIRT_BASE);
}
+static inline void __iomem *
+__arch_ioremap(unsigned long paddr, size_t size, unsigned int mtype)
+{
+ void __iomem *retval;
+ unsigned long offs = paddr - KIRKWOOD_REGS_PHYS_BASE;
+ if (mtype == MT_DEVICE && size && offs < KIRKWOOD_REGS_SIZE &&
+ size <= KIRKWOOD_REGS_SIZE && offs + size <= KIRKWOOD_REGS_SIZE) {
+ retval = (void __iomem *)KIRKWOOD_REGS_VIRT_BASE + offs;
+ } else {
+ retval = __arm_ioremap(paddr, size, mtype);
+ }
+
+ return retval;
+}
+
+static inline void
+__arch_iounmap(void __iomem *addr)
+{
+ if (addr < (void __iomem *)KIRKWOOD_REGS_VIRT_BASE ||
+ addr >= (void __iomem *)(KIRKWOOD_REGS_VIRT_BASE + KIRKWOOD_REGS_SIZE))
+ __iounmap(addr);
+}
+
+#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m)
+#define __arch_iounmap(a) __arch_iounmap(a)
#define __io(a) __io(a)
#define __mem_pci(a) (a)
* f1000000 on-chip peripheral registers
* f2000000 PCIe I/O space
* f3000000 NAND controller address window
+ * f4000000 Security Accelerator SRAM
*
* virt phys size
* fee00000 f1000000 1M on-chip peripheral registers
* fef00000 f2000000 1M PCIe I/O space
*/
+#define KIRKWOOD_SRAM_PHYS_BASE 0xf4000000
+#define KIRKWOOD_SRAM_SIZE SZ_2K
+
#define KIRKWOOD_NAND_MEM_PHYS_BASE 0xf3000000
-#define KIRKWOOD_NAND_MEM_SIZE SZ_64K /* 1K is sufficient, but 64K
- * is the minimal window size
- */
+#define KIRKWOOD_NAND_MEM_SIZE SZ_1K
#define KIRKWOOD_PCIE_IO_PHYS_BASE 0xf2000000
#define KIRKWOOD_PCIE_IO_VIRT_BASE 0xfef00000
*/
#define DDR_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x00000)
#define DDR_WINDOW_CPU_BASE (DDR_VIRT_BASE | 0x1500)
+#define DDR_OPERATION_BASE (DDR_VIRT_BASE | 0x1418)
#define DEV_BUS_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x10000)
#define DEV_BUS_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x10000)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
+
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
+#define PCIE_LINK_CTRL (PCIE_VIRT_BASE | 0x70)
+#define PCIE_STATUS (PCIE_VIRT_BASE | 0x1a04)
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
#define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000)
#define SATA_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x80000)
+#define SATA_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x80000)
+#define SATA0_IF_CTRL (SATA_VIRT_BASE | 0x2050)
+#define SATA0_PHY_MODE_2 (SATA_VIRT_BASE | 0x2330)
+#define SATA1_IF_CTRL (SATA_VIRT_BASE | 0x4050)
+#define SATA1_PHY_MODE_2 (SATA_VIRT_BASE | 0x4330)
#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
if (!variant_mask)
return;
+ /* Initialize gpiolib. */
+ orion_gpio_init();
+
printk(KERN_DEBUG "initial MPP regs:");
for (i = 0; i < MPP_NR_REGS; i++) {
mpp_ctrl[i] = readl(MPP_CTRL(i));
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c
+ *
+ * Marvell 88F6281 GTW GE Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <net/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mv643xx_eth_platform_data mv88f6281gtw_ge_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_NONE,
+ .speed = SPEED_1000,
+ .duplex = DUPLEX_FULL,
+};
+
+static struct dsa_chip_data mv88f6281gtw_ge_switch_chip_data = {
+ .port_names[0] = "lan1",
+ .port_names[1] = "lan2",
+ .port_names[2] = "lan3",
+ .port_names[3] = "lan4",
+ .port_names[4] = "wan",
+ .port_names[5] = "cpu",
+};
+
+static struct dsa_platform_data mv88f6281gtw_ge_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &mv88f6281gtw_ge_switch_chip_data,
+};
+
+static const struct flash_platform_data mv88f6281gtw_ge_spi_slave_data = {
+ .type = "mx25l12805d",
+};
+
+static struct spi_board_info __initdata mv88f6281gtw_ge_spi_slave_info[] = {
+ {
+ .modalias = "m25p80",
+ .platform_data = &mv88f6281gtw_ge_spi_slave_data,
+ .irq = -1,
+ .max_speed_hz = 50000000,
+ .bus_num = 0,
+ .chip_select = 0,
+ },
+};
+
+static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = {
+ {
+ .code = KEY_RESTART,
+ .gpio = 47,
+ .desc = "SWR Button",
+ .active_low = 1,
+ }, {
+ .code = KEY_F1,
+ .gpio = 46,
+ .desc = "WPS Button(F1)",
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_platform_data mv88f6281gtw_ge_button_data = {
+ .buttons = mv88f6281gtw_ge_button_pins,
+ .nbuttons = ARRAY_SIZE(mv88f6281gtw_ge_button_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_buttons = {
+ .name = "gpio-keys",
+ .id = -1,
+ .num_resources = 0,
+ .dev = {
+ .platform_data = &mv88f6281gtw_ge_button_data,
+ },
+};
+
+static struct gpio_led mv88f6281gtw_ge_led_pins[] = {
+ {
+ .name = "gtw:green:Status",
+ .gpio = 20,
+ .active_low = 0,
+ }, {
+ .name = "gtw:red:Status",
+ .gpio = 21,
+ .active_low = 0,
+ }, {
+ .name = "gtw:green:USB",
+ .gpio = 12,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_led_platform_data mv88f6281gtw_ge_led_data = {
+ .leds = mv88f6281gtw_ge_led_pins,
+ .num_leds = ARRAY_SIZE(mv88f6281gtw_ge_led_pins),
+};
+
+static struct platform_device mv88f6281gtw_ge_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &mv88f6281gtw_ge_led_data,
+ },
+};
+
+static unsigned int mv88f6281gtw_ge_mpp_config[] __initdata = {
+ MPP12_GPO, /* Status#_USB pin */
+ MPP20_GPIO, /* Status#_GLED pin */
+ MPP21_GPIO, /* Status#_RLED pin */
+ MPP46_GPIO, /* WPS_Switch pin */
+ MPP47_GPIO, /* SW_Init pin */
+ 0
+};
+
+static void __init mv88f6281gtw_ge_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+ kirkwood_mpp_conf(mv88f6281gtw_ge_mpp_config);
+
+ kirkwood_ehci_init();
+ kirkwood_ge00_init(&mv88f6281gtw_ge_ge00_data);
+ kirkwood_ge00_switch_init(&mv88f6281gtw_ge_switch_plat_data, NO_IRQ);
+ spi_register_board_info(mv88f6281gtw_ge_spi_slave_info,
+ ARRAY_SIZE(mv88f6281gtw_ge_spi_slave_info));
+ kirkwood_spi_init();
+ kirkwood_uart0_init();
+ platform_device_register(&mv88f6281gtw_ge_leds);
+ platform_device_register(&mv88f6281gtw_ge_buttons);
+}
+
+static int __init mv88f6281gtw_ge_pci_init(void)
+{
+ if (machine_is_mv88f6281gtw_ge())
+ kirkwood_pcie_init();
+
+ return 0;
+}
+subsys_initcall(mv88f6281gtw_ge_pci_init);
+
+MACHINE_START(MV88F6281GTW_GE, "Marvell 88F6281 GTW GE Board")
+ /* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = mv88f6281gtw_ge_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
#include <asm/irq.h>
#include <asm/mach/pci.h>
#include <plat/pcie.h>
+#include <mach/bridge-regs.h>
#include "common.h"
static int kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct resource *res;
+ extern unsigned int kirkwood_clk_ctrl;
/*
* Generic PCIe unit setup.
sys->resource[2] = NULL;
sys->io_offset = 0;
+ kirkwood_clk_ctrl |= CGC_PEX0;
+
return 1;
}
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/spi/flash.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
-#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
},
};
-static struct resource rd88f6281_nand_resource = {
- .flags = IORESOURCE_MEM,
- .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
- .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
- KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data rd88f6281_nand_data = {
- .parts = rd88f6281_nand_parts,
- .nr_parts = ARRAY_SIZE(rd88f6281_nand_parts),
- .cle = 0,
- .ale = 1,
- .width = 8,
- .chip_delay = 25,
-};
-
-static struct platform_device rd88f6281_nand_flash = {
- .name = "orion_nand",
- .id = -1,
- .dev = {
- .platform_data = &rd88f6281_nand_data,
- },
- .resource = &rd88f6281_nand_resource,
- .num_resources = 1,
-};
-
static struct mv643xx_eth_platform_data rd88f6281_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
kirkwood_init();
kirkwood_mpp_conf(rd88f6281_mpp_config);
+ kirkwood_nand_init(ARRAY_AND_SIZE(rd88f6281_nand_parts), 25);
kirkwood_ehci_init();
kirkwood_ge00_init(&rd88f6281_ge00_data);
kirkwood_sata_init(&rd88f6281_sata_data);
kirkwood_sdio_init(&rd88f6281_mvsdio_data);
kirkwood_uart0_init();
-
- platform_device_register(&rd88f6281_nand_flash);
}
static int __init rd88f6281_pci_init(void)
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <asm/mach/arch.h>
#include <mach/kirkwood.h>
#include <plat/mvsdio.h>
-#include <plat/orion_nand.h>
#include "common.h"
#include "mpp.h"
},
};
-static struct resource sheevaplug_nand_resource = {
- .flags = IORESOURCE_MEM,
- .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
- .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
- KIRKWOOD_NAND_MEM_SIZE - 1,
-};
-
-static struct orion_nand_data sheevaplug_nand_data = {
- .parts = sheevaplug_nand_parts,
- .nr_parts = ARRAY_SIZE(sheevaplug_nand_parts),
- .cle = 0,
- .ale = 1,
- .width = 8,
- .chip_delay = 25,
-};
-
-static struct platform_device sheevaplug_nand_flash = {
- .name = "orion_nand",
- .id = -1,
- .dev = {
- .platform_data = &sheevaplug_nand_data,
- },
- .resource = &sheevaplug_nand_resource,
- .num_resources = 1,
-};
-
static struct mv643xx_eth_platform_data sheevaplug_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
static struct mvsdio_platform_data sheevaplug_mvsdio_data = {
- // unfortunately the CD signal has not been connected */
+ /* unfortunately the CD signal has not been connected */
};
static struct gpio_led sheevaplug_led_pins[] = {
kirkwood_mpp_conf(sheevaplug_mpp_config);
kirkwood_uart0_init();
+ kirkwood_nand_init(ARRAY_AND_SIZE(sheevaplug_nand_parts), 25);
if (gpio_request(29, "USB Power Enable") != 0 ||
gpio_direction_output(29, 1) != 0)
kirkwood_ge00_init(&sheevaplug_ge00_data);
kirkwood_sdio_init(&sheevaplug_mvsdio_data);
- platform_device_register(&sheevaplug_nand_flash);
platform_device_register(&sheevaplug_leds);
}
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
+ MPP4_SATA1_ACTn,
+ MPP5_SATA0_ACTn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP14_UART1_RXD, /* PIC controller */
MPP15_GPIO, /* USB Copy button */
MPP16_GPIO, /* Reset button */
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP22_SATA1_PRESENTn,
- MPP23_SATA0_PRESENTn,
0
};
.id = 0,
.num_resources = 1,
.resource = loki_ge0_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = loki_ge1_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
#include <mach/mfp.h>
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x1 << 13)
+#define MFP_DRIVE_MEDIUM (0x2 << 13)
+#define MFP_DRIVE_FAST (0x3 << 13)
+
/* GPIO */
#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
#include <mach/mfp.h>
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x2 << 13)
+#define MFP_DRIVE_MEDIUM (0x4 << 13)
+#define MFP_DRIVE_FAST (0x8 << 13)
+
/* UART2 */
#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
* possible, we make the following compromise:
*
* 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 2. DRIVE strength definitions redefined to include the reserved bit
+ * - the reserved bit differs between pxa168 and pxa910, and the
+ * MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
* 3. Override MFP_CFG() and MFP_CFG_DRV()
* 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
*/
-#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
-#define MFP_DRIVE_SLOW (0x2 << 13)
-#define MFP_DRIVE_MEDIUM (0x4 << 13)
-#define MFP_DRIVE_FAST (0x8 << 13)
-
#undef MFP_CFG
#undef MFP_CFG_DRV
#undef MFP_CFG_LPM
.set_mode = timer_set_mode,
};
-static cycle_t clksrc_read(void)
+static cycle_t clksrc_read(struct clocksource *cs)
{
return timer_read();
}
.id = 0,
.num_resources = 1,
.resource = mv78xx0_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = mv78xx0_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
.id = 2,
.num_resources = 1,
.resource = mv78xx0_ge10_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
.id = 3,
.num_resources = 1,
.resource = mv78xx0_ge11_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource mv78xx0_i2c_0_resources[] = {
{
- .name = "i2c 0 base",
.start = I2C_0_PHYS_BASE,
.end = I2C_0_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c 0 irq",
.start = IRQ_MV78XX0_I2C_0,
.end = IRQ_MV78XX0_I2C_0,
.flags = IORESOURCE_IRQ,
static struct resource mv78xx0_i2c_1_resources[] = {
{
- .name = "i2c 1 base",
.start = I2C_1_PHYS_BASE,
.end = I2C_1_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c 1 irq",
.start = IRQ_MV78XX0_I2C_1,
.end = IRQ_MV78XX0_I2C_1,
.flags = IORESOURCE_IRQ,
{
int i;
+ /* Initialize gpiolib. */
+ orion_gpio_init();
+
orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
orion_irq_init(64, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_ERR_OFF));
#include <asm/mach/map.h>
+#include <mach/common.h>
#include <mach/hardware.h>
static struct map_desc imx_io_desc[] __initdata = {
}
};
-void __init mxc_map_io(void)
+void __init mx1_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX1);
+
iotable_init(imx_io_desc, ARRAY_SIZE(imx_io_desc));
}
* warranty of any kind, whether express or implied.
*/
-#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/imx-uart.h>
-#include <mach/irqs.h>
+#include <mach/hardware.h>
#include <mach/i2c.h>
+#include <mach/imx-uart.h>
#include <mach/iomux.h>
+#include <mach/irqs.h>
+
#include "devices.h"
-/*
- * UARTs platform data
- */
-static int mxc_uart1_pins[] = {
+static int mx1ads_pins[] = {
+ /* UART1 */
PC9_PF_UART1_CTS,
PC10_PF_UART1_RTS,
PC11_PF_UART1_TXD,
PC12_PF_UART1_RXD,
-};
-
-static int uart1_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart1_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = {
+ /* UART2 */
PB28_PF_UART2_CTS,
PB29_PF_UART2_RTS,
PB30_PF_UART2_TXD,
PB31_PF_UART2_RXD,
+ /* I2C */
+ PA15_PF_I2C_SDA,
+ PA16_PF_I2C_SCL,
+ /* SPI */
+ PC13_PF_SPI1_SPI_RDY,
+ PC14_PF_SPI1_SCLK,
+ PC15_PF_SPI1_SS,
+ PC16_PF_SPI1_MISO,
+ PC17_PF_SPI1_MOSI,
};
-static int uart2_mxc_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart2_mxc_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
-}
+/*
+ * UARTs platform data
+ */
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart1_mxc_init,
- .exit = uart1_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart2_mxc_init,
- .exit = uart2_mxc_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
/*
* I2C
*/
-
-static int i2c_pins[] = {
- PA15_PF_I2C_SDA,
- PA16_PF_I2C_SCL,
-};
-
-static int i2c_init(struct device *dev)
-{
- return mxc_gpio_setup_multiple_pins(i2c_pins,
- ARRAY_SIZE(i2c_pins), "I2C");
-}
-
-static void i2c_exit(struct device *dev)
-{
- mxc_gpio_release_multiple_pins(i2c_pins,
- ARRAY_SIZE(i2c_pins));
-}
-
static struct pcf857x_platform_data pcf857x_data[] = {
{
.gpio_base = 4 * 32,
static struct imxi2c_platform_data mx1ads_i2c_data = {
.bitrate = 100000,
- .init = i2c_init,
- .exit = i2c_exit,
};
static struct i2c_board_info mx1ads_i2c_devices[] = {
*/
static void __init mx1ads_init(void)
{
+ mxc_gpio_setup_multiple_pins(mx1ads_pins,
+ ARRAY_SIZE(mx1ads_pins), "mx1ads");
+
/* UART */
mxc_register_device(&imx_uart1_device, &uart_pdata[0]);
mxc_register_device(&imx_uart2_device, &uart_pdata[1]);
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &mx1ads_timer,
.init_machine = mx1ads_init,
.phys_io = 0x00200000,
.io_pg_offst = ((0xe0200000) >> 18) & 0xfffc,
.boot_params = 0x08000100,
- .map_io = mxc_map_io,
+ .map_io = mx1_map_io,
.init_irq = mxc_init_irq,
.timer = &scb9328_timer,
.init_machine = scb9328_init,
comment "MX2 platforms:"
+config MACH_MX21ADS
+ bool "MX21ADS platform"
+ depends on MACH_MX21
+ help
+ Include support for MX21ADS platform. This includes specific
+ configurations for the board and its peripherals.
+
config MACH_MX27ADS
bool "MX27ADS platform"
depends on MACH_MX27
endchoice
+config MACH_MX27_3DS
+ bool "MX27PDK platform"
+ depends on MACH_MX27
+ help
+ Include support for MX27PDK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX27LITE
+ bool "LogicPD MX27 LITEKIT platform"
+ depends on MACH_MX27
+ help
+ Include support for MX27 LITEKIT platform. This includes specific
+ configurations for the board and its peripherals.
+
endif
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o
+obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
obj-$(CONFIG_MACH_PCM038) += pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
+obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
+obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
+
__raw_writel(reg, clk->enable_reg);
}
+static unsigned long _clk_generic_round_rate(struct clk *clk,
+ unsigned long rate,
+ u32 max_divisor)
+{
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (parent_rate % rate)
+ div++;
+
+ if (div > max_divisor)
+ div = max_divisor;
+
+ return parent_rate / div;
+}
+
static int _clk_spll_enable(struct clk *clk)
{
u32 reg;
static unsigned long _clk_perclkx_round_rate(struct clk *clk,
unsigned long rate)
{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 64)
- div = 64;
-
- return parent_rate / div;
+ return _clk_generic_round_rate(clk, rate, 64);
}
static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
return parent_rate / (usb_pdf + 1U);
}
+static unsigned long _clk_usb_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ return _clk_generic_round_rate(clk, rate, 8);
+}
+
+static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
+{
+ u32 reg;
+ u32 div;
+ unsigned long parent_rate;
+
+ parent_rate = clk_get_rate(clk->parent);
+
+ div = parent_rate / rate;
+ if (div > 8 || div < 1 || ((parent_rate / div) != rate))
+ return -EINVAL;
+ div--;
+
+ reg = CSCR() & ~CCM_CSCR_USB_MASK;
+ reg |= div << CCM_CSCR_USB_OFFSET;
+ __raw_writel(reg, CCM_CSCR);
+
+ return 0;
+}
+
static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
{
unsigned long parent_rate;
static struct clk usb_clk[] = {
{
.parent = &spll_clk,
+ .secondary = &usb_clk[1],
.get_rate = _clk_usb_recalc,
.enable = _clk_enable,
.enable_reg = CCM_PCCR_USBOTG_REG,
.enable_shift = CCM_PCCR_USBOTG_OFFSET,
.disable = _clk_disable,
+ .round_rate = _clk_usb_round_rate,
+ .set_rate = _clk_usb_set_rate,
}, {
.parent = &hclk_clk,
.enable = _clk_enable,
static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 8)
- div = 8;
-
- return parent_rate / div;
+ return _clk_generic_round_rate(clk, rate, 8);
}
static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
- _REGISTER_CLOCK(NULL, "usb", usb_clk[0])
+ _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
* system startup to create static physical to virtual
* memory map for the IO modules.
*/
-void __init mxc_map_io(void)
+void __init mx21_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX21);
+
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+
+void __init mx27_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX27);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
--- /dev/null
+/*
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ * Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/imx-uart.h>
+#include <mach/imxfb.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/mmc.h>
+#include <mach/board-mx21ads.h>
+
+#include "devices.h"
+
+static unsigned int mx21ads_pins[] = {
+
+ /* CS8900A */
+ (GPIO_PORTE | GPIO_GPIO | GPIO_IN | 11),
+
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+
+ /* UART3 (IrDA) - only TXD and RXD */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+
+ /* UART4 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+
+ /* LCDC */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA24_PF_REV, /* Sharp panel dedicated signal */
+ PA25_PF_CLS, /* Sharp panel dedicated signal */
+ PA26_PF_PS, /* Sharp panel dedicated signal */
+ PA27_PF_SPL_SPR, /* Sharp panel dedicated signal */
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+
+ /* MMC/SDHC */
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+
+ /* NFC */
+ PF0_PF_NRFB,
+ PF1_PF_NFCE,
+ PF2_PF_NFWP,
+ PF3_PF_NFCLE,
+ PF4_PF_NFALE,
+ PF5_PF_NFRE,
+ PF6_PF_NFWE,
+ PF7_PF_NFIO0,
+ PF8_PF_NFIO1,
+ PF9_PF_NFIO2,
+ PF10_PF_NFIO3,
+ PF11_PF_NFIO4,
+ PF12_PF_NFIO5,
+ PF13_PF_NFIO6,
+ PF14_PF_NFIO7,
+};
+
+/* ADS's NOR flash: 2x AM29BDS128HE9VKI on 32-bit bus */
+static struct physmap_flash_data mx21ads_flash_data = {
+ .width = 4,
+};
+
+static struct resource mx21ads_flash_resource = {
+ .start = CS0_BASE_ADDR,
+ .end = CS0_BASE_ADDR + 0x02000000 - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device mx21ads_nor_mtd_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &mx21ads_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &mx21ads_flash_resource,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct imxuart_platform_data uart_norts_pdata = {
+};
+
+
+static int mx21ads_fb_init(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp |= MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+ return 0;
+}
+
+static void mx21ads_fb_exit(struct platform_device *pdev)
+{
+ u16 tmp;
+
+ tmp = __raw_readw(MX21ADS_IO_REG);
+ tmp &= ~MX21ADS_IO_LCDON;
+ __raw_writew(tmp, MX21ADS_IO_REG);
+}
+
+/*
+ * Connected is a portrait Sharp-QVGA display
+ * of type: LQ035Q7DB02
+ */
+static struct imx_fb_platform_data mx21ads_fb_data = {
+ .pixclock = 188679, /* in ps */
+ .xres = 240,
+ .yres = 320,
+
+ .bpp = 16,
+ .hsync_len = 2,
+ .left_margin = 6,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 8,
+ .lower_margin = 10,
+ .fixed_screen_cpu = 0,
+
+ .pcr = 0xFB108BC7,
+ .pwmr = 0x00A901ff,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020008,
+
+ .init = mx21ads_fb_init,
+ .exit = mx21ads_fb_exit,
+};
+
+static int mx21ads_sdhc_get_ro(struct device *dev)
+{
+ return (__raw_readw(MX21ADS_IO_REG) & MX21ADS_IO_SD_WP) ? 1 : 0;
+}
+
+static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = request_irq(IRQ_GPIOD(25), detect_irq,
+ IRQF_TRIGGER_FALLING, "mmc-detect", data);
+ if (ret)
+ goto out;
+ return 0;
+out:
+ return ret;
+}
+
+static void mx21ads_sdhc_exit(struct device *dev, void *data)
+{
+ free_irq(IRQ_GPIOD(25), data);
+}
+
+static struct imxmmc_platform_data mx21ads_sdhc_pdata = {
+ .ocr_avail = MMC_VDD_29_30 | MMC_VDD_30_31, /* 3.0V */
+ .get_ro = mx21ads_sdhc_get_ro,
+ .init = mx21ads_sdhc_init,
+ .exit = mx21ads_sdhc_exit,
+};
+
+static struct mxc_nand_platform_data mx21ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct map_desc mx21ads_io_desc[] __initdata = {
+ /*
+ * Memory-mapped I/O on MX21ADS Base board:
+ * - CS8900A Ethernet controller
+ * - ST16C2552CJ UART
+ * - CPU and Base board version
+ * - Base board I/O register
+ */
+ {
+ .virtual = MX21ADS_MMIO_BASE_ADDR,
+ .pfn = __phys_to_pfn(CS1_BASE_ADDR),
+ .length = MX21ADS_MMIO_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init mx21ads_map_io(void)
+{
+ mx21_map_io();
+ iotable_init(mx21ads_io_desc, ARRAY_SIZE(mx21ads_io_desc));
+}
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mx21ads_nor_mtd_device,
+};
+
+static void __init mx21ads_board_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins),
+ "mx21ads");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_norts_pdata);
+ mxc_register_device(&mxc_uart_device3, &uart_pdata);
+ mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
+ mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
+
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx21ads_timer_init(void)
+{
+ mx21_clocks_init(32768, 26000000);
+}
+
+static struct sys_timer mx21ads_timer = {
+ .init = mx21ads_timer_init,
+};
+
+MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx21ads_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx21ads_board_init,
+ .timer = &mx21ads_timer,
+MACHINE_END
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/board-mx27ads.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int mx27ads_pins[] = {
+ /* UART0 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART1 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART2 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* UART3 */
+ PB26_AF_UART4_RTS,
+ PB28_AF_UART4_TXD,
+ PB29_AF_UART4_CTS,
+ PB31_AF_UART4_RXD,
+ /* UART4 */
+ PB18_AF_UART5_TXD,
+ PB19_AF_UART5_RXD,
+ PB20_AF_UART5_CTS,
+ PB21_AF_UART5_RTS,
+ /* UART5 */
+ PB10_AF_UART6_TXD,
+ PB12_AF_UART6_CTS,
+ PB11_AF_UART6_RXD,
+ PB13_AF_UART6_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* FB */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /* OWIRE */
+ PE16_AF_OWIRE,
+ /* SDHC1*/
+ PE18_PF_SD1_D0,
+ PE19_PF_SD1_D1,
+ PE20_PF_SD1_D2,
+ PE21_PF_SD1_D3,
+ PE22_PF_SD1_CMD,
+ PE23_PF_SD1_CLK,
+ /* SDHC2*/
+ PB4_PF_SD2_D0,
+ PB5_PF_SD2_D1,
+ PB6_PF_SD2_D2,
+ PB7_PF_SD2_D3,
+ PB8_PF_SD2_CMD,
+ PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mx27ads_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
/* ADS's NOR flash */
static struct physmap_flash_data mx27ads_flash_data = {
.width = 2,
.resource = &mx27ads_flash_resource,
};
-static int mxc_uart0_pins[] = {
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS
+static struct imxi2c_platform_data mx27ads_i2c_data = {
+ .bitrate = 100000,
};
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins));
- return 0;
-}
-
-static int mxc_uart1_pins[] = {
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD
+static struct i2c_board_info mx27ads_i2c_devices[] = {
};
-static int uart_mxc_port1_init(struct platform_device *pdev)
+void lcd_power(int on)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
+ if (on)
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_SET_REG);
+ else
+ __raw_writew(PBC_BCTRL1_LCDON, PBC_BCTRL1_CLEAR_REG);
}
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = {
- PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS
+static struct imx_fb_platform_data mx27ads_fb_data = {
+ .pixclock = 188679,
+ .xres = 240,
+ .yres = 320,
+
+ .bpp = 16,
+ .hsync_len = 1,
+ .left_margin = 9,
+ .right_margin = 16,
+
+ .vsync_len = 1,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .fixed_screen_cpu = 0,
+
+ /*
+ * - HSYNC active high
+ * - VSYNC active high
+ * - clk notenabled while idle
+ * - clock inverted
+ * - data not inverted
+ * - data enable low active
+ * - enable sharp mode
+ */
+ .pcr = 0xFB008BC0,
+ .pwmr = 0x00A903FF,
+ .lscr1 = 0x00120300,
+ .dmacr = 0x00020010,
+
+ .lcd_power = lcd_power,
};
-static int uart_mxc_port2_init(struct platform_device *pdev)
+static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
+ return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc1-card-detect", data);
}
-static int uart_mxc_port2_exit(struct platform_device *pdev)
+static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
+ return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING,
+ "sdhc2-card-detect", data);
}
-static int mxc_uart3_pins[] = {
- PB26_AF_UART4_RTS,
- PB28_AF_UART4_TXD,
- PB29_AF_UART4_CTS,
- PB31_AF_UART4_RXD
-};
-
-static int uart_mxc_port3_init(struct platform_device *pdev)
+static void mx27ads_sdhc1_exit(struct device *dev, void *data)
{
- return mxc_gpio_setup_multiple_pins(mxc_uart3_pins,
- ARRAY_SIZE(mxc_uart3_pins), "UART3");
+ free_irq(IRQ_GPIOE(21), data);
}
-static int uart_mxc_port3_exit(struct platform_device *pdev)
+static void mx27ads_sdhc2_exit(struct device *dev, void *data)
{
- mxc_gpio_release_multiple_pins(mxc_uart3_pins,
- ARRAY_SIZE(mxc_uart3_pins));
- return 0;
+ free_irq(IRQ_GPIOB(7), data);
}
-static int mxc_uart4_pins[] = {
- PB18_AF_UART5_TXD,
- PB19_AF_UART5_RXD,
- PB20_AF_UART5_CTS,
- PB21_AF_UART5_RTS
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .init = mx27ads_sdhc1_init,
+ .exit = mx27ads_sdhc1_exit,
};
-static int uart_mxc_port4_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart4_pins,
- ARRAY_SIZE(mxc_uart4_pins), "UART4");
-}
-
-static int uart_mxc_port4_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart4_pins,
- ARRAY_SIZE(mxc_uart4_pins));
- return 0;
-}
-
-static int mxc_uart5_pins[] = {
- PB10_AF_UART6_TXD,
- PB12_AF_UART6_CTS,
- PB11_AF_UART6_RXD,
- PB13_AF_UART6_RTS
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .init = mx27ads_sdhc2_init,
+ .exit = mx27ads_sdhc2_exit,
};
-static int uart_mxc_port5_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart5_pins,
- ARRAY_SIZE(mxc_uart5_pins), "UART5");
-}
-
-static int uart_mxc_port5_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart5_pins,
- ARRAY_SIZE(mxc_uart5_pins));
- return 0;
-}
-
static struct platform_device *platform_devices[] __initdata = {
&mx27ads_nor_mtd_device,
&mxc_fec_device,
+ &mxc_w1_master_device,
};
-static int mxc_fec_pins[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
- mxc_gpio_setup_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart_mxc_port0_init,
- .exit = uart_mxc_port0_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port1_init,
- .exit = uart_mxc_port1_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port2_init,
- .exit = uart_mxc_port2_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port3_init,
- .exit = uart_mxc_port3_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port4_init,
- .exit = uart_mxc_port4_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port5_init,
- .exit = uart_mxc_port5_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
static void __init mx27ads_board_init(void)
{
- gpio_fec_active();
+ mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins),
+ "mx27ads");
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
+ mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
+
+ /* only the i2c master 1 is used on this CPU card */
+ i2c_register_board_info(1, mx27ads_i2c_devices,
+ ARRAY_SIZE(mx27ads_i2c_devices));
+ mxc_register_device(&mxc_i2c_device1, &mx27ads_i2c_data);
+ mxc_register_device(&mxc_fb_device, &mx27ads_fb_data);
+ mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+ mxc_register_device(&mxc_sdhc_device1, &sdhc2_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
static void __init mx27ads_map_io(void)
{
- mxc_map_io();
+ mx27_map_io();
iotable_init(mx27ads_io_desc, ARRAY_SIZE(mx27ads_io_desc));
}
--- /dev/null
+/*
+ * Copyright 2007 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
+ * Copyright 2009 Daniel Schaeffer (daniel.schaeffer@timesys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27lite.h>
+
+#include "devices.h"
+
+static unsigned int mx27lite_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static void __init mx27lite_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins),
+ "imx27lite");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27lite_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27lite_timer = {
+ .init = mx27lite_timer_init,
+};
+
+MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx27lite_init,
+ .timer = &mx27lite_timer,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/board-mx27pdk.h>
+
+#include "devices.h"
+
+static unsigned int mx27pdk_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static void __init mx27pdk_init(void)
+{
+ mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins),
+ "mx27pdk");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mx27pdk_timer_init(void)
+{
+ mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mx27pdk_timer = {
+ .init = mx27pdk_timer_init,
+};
+
+MACHINE_START(MX27_3DS, "Freescale MX27PDK")
+ /* maintainer: Freescale Semiconductor, Inc. */
+ .phys_io = AIPI_BASE_ADDR,
+ .io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx27_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx27pdk_init,
+ .timer = &mx27pdk_timer,
+MACHINE_END
* MA 02110-1301, USA.
*/
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-#include <linux/io.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/io.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/mtd/physmap.h>
+#include <linux/platform_device.h>
-#include <asm/mach/arch.h>
#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-pcm038.h>
#include <mach/common.h>
#include <mach/hardware.h>
-#include <mach/iomux.h>
-#ifdef CONFIG_I2C_IMX
#include <mach/i2c.h>
-#endif
-#include <asm/mach/time.h>
+#include <mach/iomux.h>
#include <mach/imx-uart.h>
-#include <mach/board-pcm038.h>
#include <mach/mxc_nand.h>
#include "devices.h"
+static int pcm038_pins[] = {
+ /* UART1 */
+ PE12_PF_UART1_TXD,
+ PE13_PF_UART1_RXD,
+ PE14_PF_UART1_CTS,
+ PE15_PF_UART1_RTS,
+ /* UART2 */
+ PE3_PF_UART2_CTS,
+ PE4_PF_UART2_RTS,
+ PE6_PF_UART2_TXD,
+ PE7_PF_UART2_RXD,
+ /* UART3 */
+ PE8_PF_UART3_TXD,
+ PE9_PF_UART3_RXD,
+ PE10_PF_UART3_CTS,
+ PE11_PF_UART3_RTS,
+ /* FEC */
+ PD0_AIN_FEC_TXD0,
+ PD1_AIN_FEC_TXD1,
+ PD2_AIN_FEC_TXD2,
+ PD3_AIN_FEC_TXD3,
+ PD4_AOUT_FEC_RX_ER,
+ PD5_AOUT_FEC_RXD1,
+ PD6_AOUT_FEC_RXD2,
+ PD7_AOUT_FEC_RXD3,
+ PD8_AF_FEC_MDIO,
+ PD9_AIN_FEC_MDC,
+ PD10_AOUT_FEC_CRS,
+ PD11_AOUT_FEC_TX_CLK,
+ PD12_AOUT_FEC_RXD0,
+ PD13_AOUT_FEC_RX_DV,
+ PD14_AOUT_FEC_RX_CLK,
+ PD15_AOUT_FEC_COL,
+ PD16_AIN_FEC_TX_ER,
+ PF23_AIN_FEC_TX_EN,
+ /* I2C2 */
+ PC5_PF_I2C2_SDA,
+ PC6_PF_I2C2_SCL,
+ /* SPI1 */
+ PD25_PF_CSPI1_RDY,
+ PD27_PF_CSPI1_SS1,
+ PD28_PF_CSPI1_SS0,
+ PD29_PF_CSPI1_SCLK,
+ PD30_PF_CSPI1_MISO,
+ PD31_PF_CSPI1_MOSI,
+ /* SSI1 */
+ PC20_PF_SSI1_FS,
+ PC21_PF_SSI1_RXD,
+ PC22_PF_SSI1_TXD,
+ PC23_PF_SSI1_CLK,
+ /* SSI4 */
+ PC16_PF_SSI4_FS,
+ PC17_PF_SSI4_RXD,
+ PC18_PF_SSI4_TXD,
+ PC19_PF_SSI4_CLK,
+};
+
/*
* Phytec's PCM038 comes with 2MiB battery buffered SRAM,
* 16 bit width
.resource = &pcm038_flash_resource,
};
-static int mxc_uart0_pins[] = {
- PE12_PF_UART1_TXD,
- PE13_PF_UART1_RXD,
- PE14_PF_UART1_CTS,
- PE15_PF_UART1_RTS
-};
-
-static int uart_mxc_port0_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins), "UART0");
-}
-
-static int uart_mxc_port0_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart0_pins,
- ARRAY_SIZE(mxc_uart0_pins));
- return 0;
-}
-
-static int mxc_uart1_pins[] = {
- PE3_PF_UART2_CTS,
- PE4_PF_UART2_RTS,
- PE6_PF_UART2_TXD,
- PE7_PF_UART2_RXD
-};
-
-static int uart_mxc_port1_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins), "UART1");
-}
-
-static int uart_mxc_port1_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart1_pins,
- ARRAY_SIZE(mxc_uart1_pins));
- return 0;
-}
-
-static int mxc_uart2_pins[] = { PE8_PF_UART3_TXD,
- PE9_PF_UART3_RXD,
- PE10_PF_UART3_CTS,
- PE11_PF_UART3_RTS };
-
-static int uart_mxc_port2_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins), "UART2");
-}
-
-static int uart_mxc_port2_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_uart2_pins,
- ARRAY_SIZE(mxc_uart2_pins));
- return 0;
-}
-
static struct imxuart_platform_data uart_pdata[] = {
{
- .init = uart_mxc_port0_init,
- .exit = uart_mxc_port0_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port1_init,
- .exit = uart_mxc_port1_exit,
.flags = IMXUART_HAVE_RTSCTS,
}, {
- .init = uart_mxc_port2_init,
- .exit = uart_mxc_port2_exit,
.flags = IMXUART_HAVE_RTSCTS,
},
};
-static int mxc_fec_pins[] = {
- PD0_AIN_FEC_TXD0,
- PD1_AIN_FEC_TXD1,
- PD2_AIN_FEC_TXD2,
- PD3_AIN_FEC_TXD3,
- PD4_AOUT_FEC_RX_ER,
- PD5_AOUT_FEC_RXD1,
- PD6_AOUT_FEC_RXD2,
- PD7_AOUT_FEC_RXD3,
- PD8_AF_FEC_MDIO,
- PD9_AIN_FEC_MDC,
- PD10_AOUT_FEC_CRS,
- PD11_AOUT_FEC_TX_CLK,
- PD12_AOUT_FEC_RXD0,
- PD13_AOUT_FEC_RX_DV,
- PD14_AOUT_FEC_RX_CLK,
- PD15_AOUT_FEC_COL,
- PD16_AIN_FEC_TX_ER,
- PF23_AIN_FEC_TX_EN
-};
-
-static void gpio_fec_active(void)
-{
- mxc_gpio_setup_multiple_pins(mxc_fec_pins,
- ARRAY_SIZE(mxc_fec_pins), "FEC");
-}
-
static struct mxc_nand_platform_data pcm038_nand_board_info = {
.width = 1,
.hw_ecc = 1,
__raw_writel(0x22220a00, CSCR_A(1));
}
-#ifdef CONFIG_I2C_IMX
-static int mxc_i2c1_pins[] = {
- PC5_PF_I2C2_SDA,
- PC6_PF_I2C2_SCL
-};
-
-static int pcm038_i2c_1_init(struct device *dev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins),
- "I2C1");
-}
-
-static void pcm038_i2c_1_exit(struct device *dev)
-{
- mxc_gpio_release_multiple_pins(mxc_i2c1_pins, ARRAY_SIZE(mxc_i2c1_pins));
-}
-
static struct imxi2c_platform_data pcm038_i2c_1_data = {
.bitrate = 100000,
- .init = pcm038_i2c_1_init,
- .exit = pcm038_i2c_1_exit,
};
static struct at24_platform_data board_eeprom = {
.type = "lm75"
}
};
-#endif
static void __init pcm038_init(void)
{
- gpio_fec_active();
+ mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
+ "PCM038");
+
pcm038_init_sram();
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_gpio_mode(PE16_AF_OWIRE);
mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
-#ifdef CONFIG_I2C_IMX
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pcm038_i2c_devices,
ARRAY_SIZE(pcm038_i2c_devices));
mxc_register_device(&mxc_i2c_device1, &pcm038_i2c_1_data);
-#endif
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx27_map_io,
.init_irq = mxc_init_irq,
.init_machine = pcm038_init,
.timer = &pcm038_timer,
* MA 02110-1301, USA.
*/
-#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/irq.h>
+#include <linux/platform_device.h>
#include <asm/mach/arch.h>
-#include <mach/hardware.h>
#include <mach/common.h>
-#include <mach/mmc.h>
-#include <mach/imxfb.h>
#include <mach/iomux.h>
+#include <mach/imxfb.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
#include "devices.h"
-static int pcm970_sdhc2_get_ro(struct device *dev)
-{
- return gpio_get_value(GPIO_PORTC + 28);
-}
-
-static int pcm970_sdhc2_pins[] = {
+static int pcm970_pins[] = {
+ /* SDHC */
PB4_PF_SD2_D0,
PB5_PF_SD2_D1,
PB6_PF_SD2_D2,
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
+ GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
+ /* display */
+ PA5_PF_LSCLK,
+ PA6_PF_LD0,
+ PA7_PF_LD1,
+ PA8_PF_LD2,
+ PA9_PF_LD3,
+ PA10_PF_LD4,
+ PA11_PF_LD5,
+ PA12_PF_LD6,
+ PA13_PF_LD7,
+ PA14_PF_LD8,
+ PA15_PF_LD9,
+ PA16_PF_LD10,
+ PA17_PF_LD11,
+ PA18_PF_LD12,
+ PA19_PF_LD13,
+ PA20_PF_LD14,
+ PA21_PF_LD15,
+ PA22_PF_LD16,
+ PA23_PF_LD17,
+ PA24_PF_REV,
+ PA25_PF_CLS,
+ PA26_PF_PS,
+ PA27_PF_SPL_SPR,
+ PA28_PF_HSYNC,
+ PA29_PF_VSYNC,
+ PA30_PF_CONTRAST,
+ PA31_PF_OE_ACD,
+ /*
+ * it seems the data line misses a pullup, so we must enable
+ * the internal pullup as a local workaround
+ */
+ PD17_PF_I2C_DATA | GPIO_PUEN,
+ PD18_PF_I2C_CLK,
+ /* Camera */
+ PB10_PF_CSI_D0,
+ PB11_PF_CSI_D1,
+ PB12_PF_CSI_D2,
+ PB13_PF_CSI_D3,
+ PB14_PF_CSI_D4,
+ PB15_PF_CSI_MCLK,
+ PB16_PF_CSI_PIXCLK,
+ PB17_PF_CSI_D5,
+ PB18_PF_CSI_D6,
+ PB19_PF_CSI_D7,
+ PB20_PF_CSI_VSYNC,
+ PB21_PF_CSI_HSYNC,
};
+static int pcm970_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(GPIO_PORTC + 28);
+}
+
static int pcm970_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data)
{
int ret;
- ret = mxc_gpio_setup_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins), "sdhc2");
- if(ret)
- return ret;
-
- ret = request_irq(IRQ_GPIOC(29), detect_irq, 0,
+ ret = request_irq(IRQ_GPIOC(29), detect_irq, IRQF_TRIGGER_FALLING,
"imx-mmc-detect", data);
if (ret)
- goto out_release_gpio;
-
- set_irq_type(IRQ_GPIOC(29), IRQF_TRIGGER_FALLING);
+ return ret;
ret = gpio_request(GPIO_PORTC + 28, "imx-mmc-ro");
- if (ret)
- goto out_release_gpio;
+ if (ret) {
+ free_irq(IRQ_GPIOC(29), data);
+ return ret;
+ }
- mxc_gpio_mode((GPIO_PORTC | 28) | GPIO_GPIO | GPIO_IN);
gpio_direction_input(GPIO_PORTC + 28);
return 0;
-
-out_release_gpio:
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
- return ret;
}
static void pcm970_sdhc2_exit(struct device *dev, void *data)
{
free_irq(IRQ_GPIOC(29), data);
gpio_free(GPIO_PORTC + 28);
- mxc_gpio_release_multiple_pins(pcm970_sdhc2_pins,
- ARRAY_SIZE(pcm970_sdhc2_pins));
}
static struct imxmmc_platform_data sdhc_pdata = {
.exit = pcm970_sdhc2_exit,
};
-static int mxc_fb_pins[] = {
- PA5_PF_LSCLK, PA6_PF_LD0, PA7_PF_LD1, PA8_PF_LD2,
- PA9_PF_LD3, PA10_PF_LD4, PA11_PF_LD5, PA12_PF_LD6,
- PA13_PF_LD7, PA14_PF_LD8, PA15_PF_LD9, PA16_PF_LD10,
- PA17_PF_LD11, PA18_PF_LD12, PA19_PF_LD13, PA20_PF_LD14,
- PA21_PF_LD15, PA22_PF_LD16, PA23_PF_LD17, PA24_PF_REV,
- PA25_PF_CLS, PA26_PF_PS, PA27_PF_SPL_SPR, PA28_PF_HSYNC,
- PA29_PF_VSYNC, PA30_PF_CONTRAST, PA31_PF_OE_ACD
-};
-
-static int pcm038_fb_init(struct platform_device *pdev)
-{
- return mxc_gpio_setup_multiple_pins(mxc_fb_pins,
- ARRAY_SIZE(mxc_fb_pins), "FB");
-}
-
-static int pcm038_fb_exit(struct platform_device *pdev)
-{
- mxc_gpio_release_multiple_pins(mxc_fb_pins, ARRAY_SIZE(mxc_fb_pins));
-
- return 0;
-}
-
/*
* Connected is a portrait Sharp-QVGA display
* of type: LQ035Q7DH06
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
-
- .init = pcm038_fb_init,
- .exit = pcm038_fb_exit,
};
/*
*/
void __init pcm970_baseboard_init(void)
{
+ mxc_gpio_setup_multiple_pins(pcm970_pins, ARRAY_SIZE(pcm970_pins),
+ "PCM970");
+
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
}
if ARCH_MX3
config ARCH_MX31
+ select ARCH_HAS_RNGA
bool
config ARCH_MX35
bool
+ select ARCH_MXC_IOMUX_V3
comment "MX3 platforms:"
config MACH_MX31LITE
bool "Support MX31 LITEKIT (LogicPD)"
select ARCH_MX31
- default n
help
Include support for MX31 LITEKIT platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31_3DS
bool "Support MX31PDK (3DS)"
select ARCH_MX31
- default n
help
Include support for MX31PDK (3DS) platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX31MOBOARD
bool "Support mx31moboard platforms (EPFL Mobots group)"
select ARCH_MX31
- default n
help
Include support for mx31moboard platform. This includes specific
configurations for the board and its peripherals.
+config MACH_MX31LILLY
+ bool "Support MX31 LILLY-1131 platforms (INCO startec)"
+ select ARCH_MX31
+ help
+ Include support for mx31 based LILLY1131 modules. This includes
+ specific configurations for the board and its peripherals.
+
config MACH_QONG
bool "Support Dave/DENX QongEVB-LITE platform"
select ARCH_MX31
- default n
help
Include support for Dave/DENX QongEVB-LITE platform. This includes
specific configurations for the board and its peripherals.
+config MACH_PCM043
+ bool "Support Phytec pcm043 (i.MX35) platforms"
+ select ARCH_MX35
+ help
+ Include support for Phytec pcm043 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_ARMADILLO5X0
+ bool "Support Atmark Armadillo-500 Development Base Board"
+ select ARCH_MX31
+ help
+ Include support for Atmark Armadillo-500 platform. This includes
+ specific configurations for the board and its peripherals.
+
+config MACH_MX35_3DS
+ bool "Support MX35PDK platform"
+ select ARCH_MX35
+ default n
+ help
+ Include support for MX35PDK platform. This includes specific
+ configurations for the board and its peripherals.
endif
obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
+obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
obj-$(CONFIG_MACH_QONG) += qong.o
+obj-$(CONFIG_MACH_PCM043) += pcm043.o
+obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
+obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
--- /dev/null
+/*
+ * armadillo5x0.c
+ *
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * updates in http://alberdroid.blogspot.com/
+ *
+ * Based on Atmark Techno, Inc. armadillo 500 BSP 2008
+ * Based on mx31ads.c and pcm037.c Great Work!
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/memory.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-armadillo5x0.h>
+#include <mach/mmc.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static int armadillo5x0_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* UART2 */
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ /* LAN9118_IRQ */
+ IOMUX_MODE(MX31_PIN_GPIO1_0, IOMUX_CONFIG_GPIO),
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+
+};
+
+/*
+ * FB support
+ */
+static const struct fb_videomode fb_modedb[] = {
+ { /* 640x480 @ 60 Hz */
+ .name = "CRT-VGA",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721,
+ .left_margin = 35,
+ .right_margin = 115,
+ .upper_margin = 43,
+ .lower_margin = 1,
+ .hsync_len = 10,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {/* 800x600 @ 56 Hz */
+ .name = "CRT-SVGA",
+ .refresh = 56,
+ .xres = 800,
+ .yres = 600,
+ .pixclock = 30000,
+ .left_margin = 30,
+ .right_margin = 108,
+ .upper_margin = 13,
+ .lower_margin = 10,
+ .hsync_len = 10,
+ .vsync_len = 1,
+ .sync = FB_SYNC_OE_ACT_HIGH | FB_SYNC_HOR_HIGH_ACT |
+ FB_SYNC_VERT_HIGH_ACT,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "CRT-VGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+/*
+ * SDHC 1
+ * MMC support
+ */
+static int armadillo5x0_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static int armadillo5x0_sdhc1_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ int ret;
+ int gpio_det, gpio_wp;
+
+ gpio_det = IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK);
+ gpio_wp = IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B);
+
+ ret = gpio_request(gpio_det, "sdhc-card-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(gpio_det);
+
+ ret = gpio_request(gpio_wp, "sdhc-write-protect");
+ if (ret)
+ goto err_gpio_free;
+
+ gpio_direction_input(gpio_wp);
+
+ /* When supported the trigger type have to be BOTH */
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "sdhc-detect", data);
+
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(gpio_wp);
+
+err_gpio_free:
+ gpio_free(gpio_det);
+
+ return ret;
+
+}
+
+static void armadillo5x0_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data);
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK));
+ gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B));
+}
+
+static struct imxmmc_platform_data sdhc_pdata = {
+ .get_ro = armadillo5x0_sdhc1_get_ro,
+ .init = armadillo5x0_sdhc1_init,
+ .exit = armadillo5x0_sdhc1_exit,
+};
+
+/*
+ * SMSC 9118
+ * Network support
+ */
+static struct resource armadillo5x0_smc911x_resources[] = {
+ {
+ .start = CS3_BASE_ADDR,
+ .end = CS3_BASE_ADDR + SZ_32M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config smsc911x_info = {
+ .flags = SMSC911X_USE_32BIT,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device armadillo5x0_smc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(armadillo5x0_smc911x_resources),
+ .resource = armadillo5x0_smc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_info,
+ },
+};
+
+/* UART device data */
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &armadillo5x0_smc911x_device,
+};
+
+/*
+ * Perform board specific initializations
+ */
+static void __init armadillo5x0_init(void)
+{
+ mxc_iomux_setup_multiple_pins(armadillo5x0_pins,
+ ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0");
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ /* Register UART */
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ /* SMSC9118 IRQ pin */
+ gpio_direction_input(MX31_PIN_GPIO1_0);
+
+ /* Register SDHC */
+ mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+
+ /* Register FB */
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init armadillo5x0_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer armadillo5x0_timer = {
+ .init = armadillo5x0_timer_init,
+};
+
+MACHINE_START(ARMADILLO5X0, "Armadillo-500")
+ /* Maintainer: Alberto Panizzo */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = mx31_map_io,
+ .init_irq = mxc_init_irq,
+ .timer = &armadillo5x0_timer,
+ .init_machine = armadillo5x0_init,
+MACHINE_END
{ .arm = 0, .ahb = 0, .sel = 0},
};
-static struct arm_ahb_div clk_automotive[] = {
- { .arm = 1, .ahb = 3, .sel = 0},
- { .arm = 1, .ahb = 2, .sel = 1},
- { .arm = 2, .ahb = 1, .sel = 1},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 1, .ahb = 6, .sel = 0},
- { .arm = 1, .ahb = 4, .sel = 1},
- { .arm = 2, .ahb = 2, .sel = 1},
- { .arm = 0, .ahb = 0, .sel = 0},
-};
-
static unsigned long get_rate_arm(void)
{
unsigned long pdr0 = __raw_readl(CCM_BASE + CCM_PDR0);
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
- if (pdr0 & 1) {
- /* consumer path */
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- if (aad->sel)
- fref = fref * 2 / 3;
- } else {
- /* auto path */
- aad = &clk_automotive[(pdr0 >> 9) & 0x7];
- if (aad->sel)
- fref = fref * 3 / 4;
- }
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
+ if (aad->sel)
+ fref = fref * 2 / 3;
+
return fref / aad->arm;
}
struct arm_ahb_div *aad;
unsigned long fref = get_rate_mpll();
- if (pdr0 & 1)
- /* consumer path */
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- else
- /* auto path */
- aad = &clk_automotive[(pdr0 >> 9) & 0x7];
+ aad = &clk_consumer[(pdr0 >> 16) & 0xf];
return fref / aad->ahb;
}
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
_REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
- _REGISTER_CLOCK(NULL, "ipu", ipu_clk)
+ _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
+ _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
_REGISTER_CLOCK(NULL, "kpp", kpp_clk)
_REGISTER_CLOCK(NULL, "mlb", mlb_clk)
_REGISTER_CLOCK(NULL, "mshc", mshc_clk)
int i;
unsigned int ll = 0;
- mxc_set_cpu_type(MXC_CPU_MX35);
-
#ifdef CONFIG_DEBUG_LL_CONSOLE
ll = (3 << 16);
#endif
DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &ahb_clk);
+DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
u32 reg;
int i;
- mxc_set_cpu_type(MXC_CPU_MX31);
-
ckih_rate = fref;
for (i = 0; i < ARRAY_SIZE(lookups); i++)
clkdev_add(&lookups[i]);
+ /* change the csi_clk parent if necessary */
+ reg = __raw_readl(MXC_CCM_CCMR);
+ if (!(reg & MXC_CCM_CCMR_CSCS))
+ if (clk_set_parent(&csi_clk, &usb_pll_clk))
+ pr_err("%s: error changing csi_clk parent\n", __func__);
+
+
/* Turn off all possible clocks */
__raw_writel((3 << 4), MXC_CCM_CGR0);
__raw_writel(0, MXC_CCM_CGR1);
MX32, but still required to be set */
MXC_CCM_CGR2);
+ /*
+ * Before turning off usb_pll make sure ipg_per_clk is generated
+ * by ipg_clk and not usb_pll.
+ */
+ __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
+
usb_pll_disable(&usb_pll_clk);
pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
* Boston, MA 02110-1301, USA.
*/
+#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/gpio.h>
+#include <linux/dma-mapping.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
+#include <mach/common.h>
#include <mach/imx-uart.h>
+#include <mach/mx3_camera.h>
#include "devices.h"
.num_resources = ARRAY_SIZE(mxcsdhc1_resources),
.resource = mxcsdhc1_resources,
};
+
+static struct resource rnga_resources[] = {
+ {
+ .start = RNGA_BASE_ADDR,
+ .end = RNGA_BASE_ADDR + 0x28,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mxc_rnga_device = {
+ .name = "mxc_rnga",
+ .id = -1,
+ .num_resources = 1,
+ .resource = rnga_resources,
+};
#endif /* CONFIG_ARCH_MX31 */
/* i.MX31 Image Processing Unit */
.num_resources = ARRAY_SIZE(fb_resources),
.resource = fb_resources,
.dev = {
- .coherent_dma_mask = 0xffffffff,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
+static struct resource camera_resources[] = {
+ {
+ .start = IPU_CTRL_BASE_ADDR + 0x60,
+ .end = IPU_CTRL_BASE_ADDR + 0x87,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device mx3_camera = {
+ .name = "mx3-camera",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(camera_resources),
+ .resource = camera_resources,
+ .dev = {
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+};
+
+static struct resource otg_resources[] = {
+ {
+ .start = OTG_BASE_ADDR,
+ .end = OTG_BASE_ADDR + 0x1ff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = MXC_INT_USB3,
+ .end = MXC_INT_USB3,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static u64 otg_dmamask = DMA_BIT_MASK(32);
+
+/* OTG gadget device */
+struct platform_device mxc_otg_udc_device = {
+ .name = "fsl-usb2-udc",
+ .id = -1,
+ .dev = {
+ .dma_mask = &otg_dmamask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .resource = otg_resources,
+ .num_resources = ARRAY_SIZE(otg_resources),
+};
+
#ifdef CONFIG_ARCH_MX35
static struct resource mxc_fec_resources[] = {
{
if (cpu_is_mx31()) {
mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR;
mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff;
+ mxc_register_device(&mxc_rnga_device, NULL);
}
if (cpu_is_mx35()) {
mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx3_ipu;
extern struct platform_device mx3_fb;
+extern struct platform_device mx3_camera;
extern struct platform_device mxc_fec_device;
extern struct platform_device mxcsdhc_device0;
extern struct platform_device mxcsdhc_device1;
+extern struct platform_device mxc_otg_udc_device;
+extern struct platform_device mxc_rnga_device;
+
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/io.h>
-#include <linux/gpio.h>
#include <linux/kernel.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
EXPORT_SYMBOL(mxc_iomux_set_pad);
/*
- * setups a single pin:
+ * allocs a single pin:
* - reserves the pin so that it is not claimed by another driver
* - setups the iomux according to the configuration
- * - if the pin is configured as a GPIO, we claim it through kernel gpiolib
*/
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label)
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
- unsigned gpio;
if (pad >= (PIN_MAX + 1)) {
printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n",
if (test_and_set_bit(pad, mxc_pin_alloc_map)) {
printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n",
pad, label ? label : "?");
- return -EINVAL;
+ return -EBUSY;
}
mxc_iomux_mode(pin);
- /* if we have a gpio, we can allocate it */
- gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
- if (gpio < (GPIO_PORT_MAX + 1) * 32)
- if (gpio_request(gpio, label))
- return -EINVAL;
-
return 0;
}
-EXPORT_SYMBOL(mxc_iomux_setup_pin);
+EXPORT_SYMBOL(mxc_iomux_alloc_pin);
int mxc_iomux_setup_multiple_pins(unsigned int *pin_list, unsigned count,
const char *label)
int ret = -EINVAL;
for (i = 0; i < count; i++) {
- if (mxc_iomux_setup_pin(*p, label))
+ ret = mxc_iomux_alloc_pin(*p, label);
+ if (ret)
goto setup_error;
p++;
}
void mxc_iomux_release_pin(const unsigned int pin)
{
unsigned pad = pin & IOMUX_PADNUM_MASK;
- unsigned gpio;
if (pad < (PIN_MAX + 1))
clear_bit(pad, mxc_pin_alloc_map);
-
- gpio = (pin & IOMUX_GPIONUM_MASK) >> IOMUX_GPIONUM_SHIFT;
- if (gpio < (GPIO_PORT_MAX + 1) * 32)
- gpio_free(gpio);
}
EXPORT_SYMBOL(mxc_iomux_release_pin);
* system startup to create static physical to virtual memory mappings
* for the IO modules.
*/
-void __init mxc_map_io(void)
+void __init mx31_map_io(void)
{
+ mxc_set_cpu_type(MXC_CPU_MX31);
+
+ iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
+}
+
+void __init mx35_map_io(void)
+{
+ mxc_set_cpu_type(MXC_CPU_MX35);
+
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
/*
* Configure INT line as GPIO input
*/
- mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
+ mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_GPIO1_4, IOMUX_CONFIG_GPIO), "expio");
/* disable the interrupt and clear the status */
__raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG);
*/
static void __init mx31ads_map_io(void)
{
- mxc_map_io();
+ mx31_map_io();
iotable_init(mx31ads_io_desc, ARRAY_SIZE(mx31ads_io_desc));
}
--- /dev/null
+/*
+ * LILLY-1131 development board support
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * based on code for other MX31 boards,
+ *
+ * Copyright 2005-2007 Freescale Semiconductor
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+#include <mach/mmc.h>
+#include <mach/mx3fb.h>
+#include <mach/ipu.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LILLY-1131 development board. If you design an own baseboard for the
+ * module, use this file as base for support code.
+ */
+
+static unsigned int lilly_db_board_pins[] __initdata = {
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3,
+ MX31_PIN_CSPI3_SCLK__RTS3,
+ MX31_PIN_CSPI3_SPI_RDY__CTS3,
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ MX31_PIN_CONTRAST__CONTRAST,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC support */
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int gpio_det, gpio_wp;
+
+static int mxc_mmc1_init(struct device *dev,
+ irq_handler_t detect_irq, void *data)
+{
+ int ret;
+
+ gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
+ gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
+
+ ret = gpio_request(gpio_det, "MMC detect");
+ if (ret)
+ return ret;
+
+ ret = gpio_request(gpio_wp, "MMC w/p");
+ if (ret)
+ goto exit_free_det;
+
+ gpio_direction_input(gpio_det);
+ gpio_direction_input(gpio_wp);
+
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "MMC detect", data);
+ if (ret)
+ goto exit_free_wp;
+
+ return 0;
+
+exit_free_wp:
+ gpio_free(gpio_wp);
+
+exit_free_det:
+ gpio_free(gpio_det);
+
+ return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+ gpio_free(gpio_det);
+ gpio_free(gpio_wp);
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+ .get_ro = mxc_mmc1_get_ro,
+ .init = mxc_mmc1_init,
+ .exit = mxc_mmc1_exit,
+};
+
+/* Framebuffer support */
+static struct ipu_platform_data ipu_data __initdata = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static const struct fb_videomode fb_modedb = {
+ /* 640x480 TFT panel (IPS-056T) */
+ .name = "CRT-VGA",
+ .refresh = 64,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 30000,
+ .left_margin = 200,
+ .right_margin = 2,
+ .upper_margin = 2,
+ .lower_margin = 2,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+};
+
+static struct mx3fb_platform_data fb_pdata __initdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "CRT-VGA",
+ .mode = &fb_modedb,
+ .num_modes = 1,
+};
+
+#define LCD_VCC_EN_GPIO (7)
+
+static void __init mx31lilly_init_fb(void)
+{
+ if (gpio_request(LCD_VCC_EN_GPIO, "LCD enable") != 0) {
+ printk(KERN_WARNING "unable to request LCD_VCC_EN pin.\n");
+ return;
+ }
+
+ mxc_register_device(&mx3_ipu, &ipu_data);
+ mxc_register_device(&mx3_fb, &fb_pdata);
+ gpio_direction_output(LCD_VCC_EN_GPIO, 1);
+}
+
+void __init mx31lilly_db_init(void)
+{
+ mxc_iomux_setup_multiple_pins(lilly_db_board_pins,
+ ARRAY_SIZE(lilly_db_board_pins),
+ "development board pins");
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+ mxc_register_device(&mxc_uart_device2, &uart_pdata);
+ mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+ mx31lilly_init_fb();
+}
+
--- /dev/null
+/*
+ * LILLY-1131 module support
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * based on code for other MX31 boards,
+ *
+ * Copyright 2005-2007 Freescale Semiconductor
+ * Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/smsc911x.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lilly.h>
+
+#include "devices.h"
+
+/*
+ * This file contains module-specific initialization routines for LILLY-1131.
+ * Initialization of peripherals found on the baseboard is implemented in the
+ * appropriate baseboard support code.
+ */
+
+/* SMSC ethernet support */
+
+static struct resource smsc91x_resources[] = {
+ {
+ .start = CS4_BASE_ADDR,
+ .end = CS4_BASE_ADDR + 0xffff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+ }
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT |
+ SMSC911X_SAVE_MAC_ADDRESS |
+ SMSC911X_FORCE_INTERNAL_PHY,
+};
+
+static struct platform_device smsc91x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc91x_resources),
+ .resource = smsc91x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ }
+};
+
+/* NOR flash */
+static struct physmap_flash_data nor_flash_data = {
+ .width = 2,
+};
+
+static struct resource nor_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .resource = &nor_flash_resource,
+ .num_resources = 1,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &smsc91x_device,
+ &physmap_flash_device,
+ &mxc_i2c_device1,
+};
+
+static int mx31lilly_baseboard;
+core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444);
+
+static void __init mx31lilly_board_init(void)
+{
+ switch (mx31lilly_baseboard) {
+ case MX31LILLY_NOBOARD:
+ break;
+ case MX31LILLY_DB:
+ mx31lilly_db_init();
+ break;
+ default:
+ printk(KERN_ERR "Illegal mx31lilly_baseboard type %d\n",
+ mx31lilly_baseboard);
+ }
+
+ mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
+ mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init mx31lilly_timer_init(void)
+{
+ mx31_clocks_init(26000000);
+}
+
+static struct sys_timer mx31lilly_timer = {
+ .init = mx31lilly_timer_init,
+};
+
+MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx31_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mx31lilly_board_init,
+ .timer = &mx31lilly_timer,
+MACHINE_END
+
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/page.h>
#include <asm/setup.h>
#include <mach/board-mx31lite.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/irqs.h>
+#include <mach/mxc_nand.h>
+#include "devices.h"
/*
* This file contains the board-specific initialization routines.
*/
+static unsigned int mx31lite_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* LAN9117 IRQ pin */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct mxc_nand_platform_data mx31lite_nand_board_info = {
+ .width = 1,
+ .hw_ecc = 1,
+};
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT,
+};
+
+static struct resource smsc911x_resources[] = {
+ [0] = {
+ .start = CS4_BASE_ADDR,
+ .end = CS4_BASE_ADDR + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .end = IOMUX_TO_IRQ(MX31_PIN_SFS6),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
+};
+
/*
* This structure defines the MX31 memory map.
*/
*/
void __init mx31lite_map_io(void)
{
- mxc_map_io();
+ mx31_map_io();
iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
}
*/
static void __init mxc_board_init(void)
{
+ int ret;
+
+ mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
+ "mx31lite");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
+
+ /* SMSC9117 IRQ pin */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+ platform_device_register(&smsc911x_device);
+ }
}
static void __init mx31lite_timer_init(void)
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/hardware.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int devboard_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
+ MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+ /* SDHC2 */
+ MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+ MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+ MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+ MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+};
+
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static int mxc_uart1_pins[] = {
- MX31_PIN_CTS2__CTS2, MX31_PIN_RTS2__RTS2,
- MX31_PIN_TXD2__TXD2, MX31_PIN_RXD2__RXD2,
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int devboard_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC2_WP);
+}
+
+static int devboard_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC2_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC2_CD);
+
+ ret = gpio_request(SDHC2_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC2_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc2-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC2_WP);
+err_gpio_free:
+ gpio_free(SDHC2_CD);
+
+ return ret;
+}
+
+static void devboard_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC2_CD), data);
+ gpio_free(SDHC2_WP);
+ gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .get_ro = devboard_sdhc2_get_ro,
+ .init = devboard_sdhc2_init,
+ .exit = devboard_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
};
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void devboard_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_devboard_init(void)
{
printk(KERN_INFO "Initializing mx31devboard peripherals\n");
- mxc_iomux_setup_multiple_pins(mxc_uart1_pins, ARRAY_SIZE(mxc_uart1_pins), "uart1");
+
+ mxc_iomux_setup_multiple_pins(devboard_pins, ARRAY_SIZE(devboard_pins),
+ "devboard");
+
mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ devboard_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/fsl_devices.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
+#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int marxbot_pins[] = {
+ /* SDHC2 */
+ MX31_PIN_PC_PWRON__SD2_DATA3, MX31_PIN_PC_VS1__SD2_DATA2,
+ MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
+ MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
+ MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+ /* CSI */
+ MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
+ MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
+ MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
+ MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
+ MX31_PIN_CSI_D12__CSI_D12, MX31_PIN_CSI_D13__CSI_D13,
+ MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
+ MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
+ MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+ MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
+ MX31_PIN_TXD2__GPIO1_28,
+ /* USB OTG */
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
+ MX31_PIN_USB_OC__GPIO1_30,
+};
+
+#define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
+#define SDHC2_WP IOMUX_TO_GPIO(MX31_PIN_ATA_DIOW)
+
+static int marxbot_sdhc2_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC2_WP);
+}
+
+static int marxbot_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC2_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC2_CD);
+
+ ret = gpio_request(SDHC2_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC2_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC2_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc2-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC2_WP);
+err_gpio_free:
+ gpio_free(SDHC2_CD);
+
+ return ret;
+}
+
+static void marxbot_sdhc2_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC2_CD), data);
+ gpio_free(SDHC2_WP);
+ gpio_free(SDHC2_CD);
+}
+
+static struct imxmmc_platform_data sdhc2_pdata = {
+ .get_ro = marxbot_sdhc2_get_ro,
+ .init = marxbot_sdhc2_init,
+ .exit = marxbot_sdhc2_exit,
+};
+
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
+#define OTG_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST)
+#define OTG_EN_B IOMUX_TO_GPIO(MX31_PIN_USB_OC)
+
+static void marxbot_usbotg_init(void)
+{
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, OTG_PAD_CFG);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, OTG_PAD_CFG);
+
+ gpio_request(OTG_EN_B, "usb-udc-en");
+ gpio_direction_output(OTG_EN_B, 0);
+}
+
/*
* system init for baseboard usage. Will be called by mx31moboard init.
*/
void __init mx31moboard_marxbot_init(void)
{
printk(KERN_INFO "Initializing mx31marxbot peripherals\n");
+
+ mxc_iomux_setup_multiple_pins(marxbot_pins, ARRAY_SIZE(marxbot_pins),
+ "marxbot");
+
+ mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+ marxbot_usbotg_init();
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/types.h>
+#include <linux/gpio.h>
#include <linux/init.h>
-
-#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/memory.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/partitions.h>
-#include <linux/memory.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
-#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <asm/mach/map.h>
+#include <mach/board-mx31moboard.h>
#include <mach/common.h>
+#include <mach/hardware.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
-#include <mach/board-mx31moboard.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
#include "devices.h"
+static unsigned int moboard_pins[] = {
+ /* UART0 */
+ MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+ /* UART4 */
+ MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
+ MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+ /* I2C0 */
+ MX31_PIN_I2C_DAT__I2C1_SDA, MX31_PIN_I2C_CLK__I2C1_SCL,
+ /* I2C1 */
+ MX31_PIN_DCD_DTE1__I2C2_SDA, MX31_PIN_RI_DTE1__I2C2_SCL,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3, MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1, MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK, MX31_PIN_SD1_CMD__SD1_CMD,
+ MX31_PIN_ATA_CS0__GPIO3_26, MX31_PIN_ATA_CS1__GPIO3_27,
+};
+
static struct physmap_flash_data mx31moboard_flash_data = {
.width = 2,
};
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct platform_device *devices[] __initdata = {
- &mx31moboard_flash,
+static struct imxi2c_platform_data moboard_i2c0_pdata = {
+ .bitrate = 400000,
};
-static int mxc_uart0_pins[] = {
- MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+static struct imxi2c_platform_data moboard_i2c1_pdata = {
+ .bitrate = 100000,
};
-static int mxc_uart4_pins[] = {
- MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
- MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
+
+#define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
+#define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
+
+static int moboard_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(SDHC1_WP);
+}
+
+static int moboard_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
+{
+ int ret;
+
+ ret = gpio_request(SDHC1_CD, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_CD);
+
+ ret = gpio_request(SDHC1_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_WP);
+
+ ret = request_irq(gpio_to_irq(SDHC1_CD), detect_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "sdhc1-card-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+ gpio_free(SDHC1_WP);
+err_gpio_free:
+ gpio_free(SDHC1_CD);
+
+ return ret;
+}
+
+static void moboard_sdhc1_exit(struct device *dev, void *data)
+{
+ free_irq(gpio_to_irq(SDHC1_CD), data);
+ gpio_free(SDHC1_WP);
+ gpio_free(SDHC1_CD);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+ .get_ro = moboard_sdhc1_get_ro,
+ .init = moboard_sdhc1_init,
+ .exit = moboard_sdhc1_exit,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mx31moboard_flash,
};
static int mx31moboard_baseboard;
*/
static void __init mxc_board_init(void)
{
+ mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins),
+ "moboard");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_setup_multiple_pins(mxc_uart0_pins, ARRAY_SIZE(mxc_uart0_pins), "uart0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_iomux_setup_multiple_pins(mxc_uart4_pins, ARRAY_SIZE(mxc_uart4_pins), "uart4");
mxc_register_device(&mxc_uart_device4, &uart_pdata);
+ mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
+ mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
+
+ mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
+
switch (mx31moboard_baseboard) {
case MX31NOBOARD:
break;
mx31moboard_marxbot_init();
break;
default:
- printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n", mx31moboard_baseboard);
+ printk(KERN_ERR "Illegal mx31moboard_baseboard type %d\n",
+ mx31moboard_baseboard);
}
}
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31moboard_timer,
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/smsc911x.h>
+#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
* @ingroup System
*/
+static int mx31pdk_pins[] = {
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO),
+};
+
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
};
-static int uart_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
+/*
+ * Support for the SMSC9217 on the Debug board.
+ */
+
+static struct smsc911x_platform_config smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
+ .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource smsc911x_resources[] = {
+ {
+ .start = LAN9217_BASE_ADDR,
+ .end = LAN9217_BASE_ADDR + 0xff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = EXPIO_INT_ENET,
+ .end = EXPIO_INT_ENET,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smsc911x_resources),
+ .resource = smsc911x_resources,
+ .dev = {
+ .platform_data = &smsc911x_config,
+ },
};
-static inline void mxc_init_imx_uart(void)
+/*
+ * Routines for the CPLD on the debug board. It contains a CPLD handling
+ * LEDs, switches, interrupts for Ethernet.
+ */
+
+static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc)
{
- mxc_iomux_setup_multiple_pins(uart_pins, ARRAY_SIZE(uart_pins), "uart-0");
- mxc_register_device(&mxc_uart_device0, &uart_pdata);
+ uint32_t imr_val;
+ uint32_t int_valid;
+ uint32_t expio_irq;
+
+ imr_val = __raw_readw(CPLD_INT_MASK_REG);
+ int_valid = __raw_readw(CPLD_INT_STATUS_REG) & ~imr_val;
+
+ expio_irq = MXC_EXP_IO_BASE;
+ for (; int_valid != 0; int_valid >>= 1, expio_irq++) {
+ if ((int_valid & 1) == 0)
+ continue;
+ generic_handle_irq(expio_irq);
+ }
+}
+
+/*
+ * Disable an expio pin's interrupt by setting the bit in the imr.
+ * @param irq an expio virtual irq number
+ */
+static void expio_mask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* mask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg |= 1 << expio;
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+/*
+ * Acknowledge an expanded io pin's interrupt by clearing the bit in the isr.
+ * @param irq an expanded io virtual irq number
+ */
+static void expio_ack_irq(uint32_t irq)
+{
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* clear the interrupt status */
+ __raw_writew(1 << expio, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ /* mask the interrupt */
+ expio_mask_irq(irq);
+}
+
+/*
+ * Enable a expio pin's interrupt by clearing the bit in the imr.
+ * @param irq a expio virtual irq number
+ */
+static void expio_unmask_irq(uint32_t irq)
+{
+ uint16_t reg;
+ uint32_t expio = MXC_IRQ_TO_EXPIO(irq);
+
+ /* unmask the interrupt */
+ reg = __raw_readw(CPLD_INT_MASK_REG);
+ reg &= ~(1 << expio);
+ __raw_writew(reg, CPLD_INT_MASK_REG);
+}
+
+static struct irq_chip expio_irq_chip = {
+ .ack = expio_ack_irq,
+ .mask = expio_mask_irq,
+ .unmask = expio_unmask_irq,
+};
+
+static int __init mx31pdk_init_expio(void)
+{
+ int i;
+ int ret;
+
+ /* Check if there's a debug board connected */
+ if ((__raw_readw(CPLD_MAGIC_NUMBER1_REG) != 0xAAAA) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER2_REG) != 0x5555) ||
+ (__raw_readw(CPLD_MAGIC_NUMBER3_REG) != 0xCAFE)) {
+ /* No Debug board found */
+ return -ENODEV;
+ }
+
+ pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n",
+ __raw_readw(CPLD_CODE_VER_REG));
+
+ /*
+ * Configure INT line as GPIO input
+ */
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "sms9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+ /* Disable the interrupts and clear the status */
+ __raw_writew(0, CPLD_INT_MASK_REG);
+ __raw_writew(0xFFFF, CPLD_INT_RESET_REG);
+ __raw_writew(0, CPLD_INT_RESET_REG);
+ __raw_writew(0x1F, CPLD_INT_MASK_REG);
+ for (i = MXC_EXP_IO_BASE;
+ i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES);
+ i++) {
+ set_irq_chip(i, &expio_irq_chip);
+ set_irq_handler(i, handle_level_irq);
+ set_irq_flags(i, IRQF_VALID);
+ }
+ set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW);
+ set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler);
+
+ return 0;
+}
+
+/*
+ * This structure defines the MX31 memory map.
+ */
+static struct map_desc mx31pdk_io_desc[] __initdata = {
+ {
+ .virtual = SPBA0_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+ .length = SPBA0_SIZE,
+ .type = MT_DEVICE_NONSHARED,
+ }, {
+ .virtual = CS5_BASE_ADDR_VIRT,
+ .pfn = __phys_to_pfn(CS5_BASE_ADDR),
+ .length = CS5_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init mx31pdk_map_io(void)
+{
+ mx31_map_io();
+ iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc));
}
/*!
*/
static void __init mxc_board_init(void)
{
- mxc_init_imx_uart();
+ mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins),
+ "mx31pdk");
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ if (!mx31pdk_init_expio())
+ platform_device_register(&smsc911x_device);
}
static void __init mx31pdk_timer_init(void)
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31pdk_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &mx31pdk_timer,
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * Author: Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx35.h>
+
+#include "devices.h"
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &mxc_fec_device,
+};
+
+static struct pad_desc mx35pdk_pads[] = {
+ /* UART1 */
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+}
+
+static void __init mx35pdk_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer mx35pdk_timer = {
+ .init = mx35pdk_timer_init,
+};
+
+MACHINE_START(MX35_3DS, "Freescale MX35PDK")
+ /* Maintainer: Freescale Semiconductor, Inc */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &mx35pdk_timer,
+MACHINE_END
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
+#include <linux/fsl_devices.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
#include <mach/board-pcm037.h>
+#include <mach/mx3fb.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
#ifdef CONFIG_I2C_IMX
#include "devices.h"
+static unsigned int pcm037_pins[] = {
+ /* I2C */
+ MX31_PIN_CSPI2_MOSI__SCL,
+ MX31_PIN_CSPI2_MISO__SDA,
+ /* SDHC1 */
+ MX31_PIN_SD1_DATA3__SD1_DATA3,
+ MX31_PIN_SD1_DATA2__SD1_DATA2,
+ MX31_PIN_SD1_DATA1__SD1_DATA1,
+ MX31_PIN_SD1_DATA0__SD1_DATA0,
+ MX31_PIN_SD1_CLK__SD1_CLK,
+ MX31_PIN_SD1_CMD__SD1_CMD,
+ IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO), /* card detect */
+ IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO), /* write protect */
+ /* SPI1 */
+ MX31_PIN_CSPI1_MOSI__MOSI,
+ MX31_PIN_CSPI1_MISO__MISO,
+ MX31_PIN_CSPI1_SCLK__SCLK,
+ MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+ MX31_PIN_CSPI1_SS0__SS0,
+ MX31_PIN_CSPI1_SS1__SS1,
+ MX31_PIN_CSPI1_SS2__SS2,
+ /* UART1 */
+ MX31_PIN_CTS1__CTS1,
+ MX31_PIN_RTS1__RTS1,
+ MX31_PIN_TXD1__TXD1,
+ MX31_PIN_RXD1__RXD1,
+ /* UART2 */
+ MX31_PIN_TXD2__TXD2,
+ MX31_PIN_RXD2__RXD2,
+ MX31_PIN_CTS2__CTS2,
+ MX31_PIN_RTS2__RTS2,
+ /* UART3 */
+ MX31_PIN_CSPI3_MOSI__RXD3,
+ MX31_PIN_CSPI3_MISO__TXD3,
+ MX31_PIN_CSPI3_SCLK__RTS3,
+ MX31_PIN_CSPI3_SPI_RDY__CTS3,
+ /* LAN9217 irq pin */
+ IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
+ /* Onewire */
+ MX31_PIN_BATT_LINE__OWIRE,
+ /* Framebuffer */
+ MX31_PIN_LD0__LD0,
+ MX31_PIN_LD1__LD1,
+ MX31_PIN_LD2__LD2,
+ MX31_PIN_LD3__LD3,
+ MX31_PIN_LD4__LD4,
+ MX31_PIN_LD5__LD5,
+ MX31_PIN_LD6__LD6,
+ MX31_PIN_LD7__LD7,
+ MX31_PIN_LD8__LD8,
+ MX31_PIN_LD9__LD9,
+ MX31_PIN_LD10__LD10,
+ MX31_PIN_LD11__LD11,
+ MX31_PIN_LD12__LD12,
+ MX31_PIN_LD13__LD13,
+ MX31_PIN_LD14__LD14,
+ MX31_PIN_LD15__LD15,
+ MX31_PIN_LD16__LD16,
+ MX31_PIN_LD17__LD17,
+ MX31_PIN_VSYNC3__VSYNC3,
+ MX31_PIN_HSYNC__HSYNC,
+ MX31_PIN_FPSHIFT__FPSHIFT,
+ MX31_PIN_DRDY0__DRDY0,
+ MX31_PIN_D3_REV__D3_REV,
+ MX31_PIN_CONTRAST__CONTRAST,
+ MX31_PIN_D3_SPL__D3_SPL,
+ MX31_PIN_D3_CLS__D3_CLS,
+ MX31_PIN_LCS0__GPI03_23,
+};
+
static struct physmap_flash_data pcm037_flash_data = {
.width = 2,
};
.flags = IORESOURCE_MEM,
};
+static int usbotg_pins[] = {
+ MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
+ MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
+ MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
+ MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
+ MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
+ MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
+ MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
+ MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
+ MX31_PIN_USBOTG_CLK__USBOTG_CLK,
+ MX31_PIN_USBOTG_DIR__USBOTG_DIR,
+ MX31_PIN_USBOTG_NXT__USBOTG_NXT,
+ MX31_PIN_USBOTG_STP__USBOTG_STP,
+};
+
+/* USB OTG HS port */
+static int __init gpio_usbotg_hs_activate(void)
+{
+ int ret = mxc_iomux_setup_multiple_pins(usbotg_pins,
+ ARRAY_SIZE(usbotg_pins), "usbotg");
+
+ if (ret < 0) {
+ printk(KERN_ERR "Cannot set up OTG pins\n");
+ return ret;
+ }
+
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+ mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST);
+
+ return 0;
+}
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+ .operating_mode = FSL_USB2_DR_DEVICE,
+ .phy_mode = FSL_USB2_PHY_ULPI,
+};
+
static struct platform_device pcm037_flash = {
.name = "physmap-flash",
.id = 0,
};
#ifdef CONFIG_I2C_IMX
-static int i2c_1_pins[] = {
- MX31_PIN_CSPI2_MOSI__SCL,
- MX31_PIN_CSPI2_MISO__SDA,
-};
-
-static int pcm037_i2c_1_init(struct device *dev)
-{
- return mxc_iomux_setup_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins),
- "i2c-1");
-}
-
-static void pcm037_i2c_1_exit(struct device *dev)
-{
- mxc_iomux_release_multiple_pins(i2c_1_pins, ARRAY_SIZE(i2c_1_pins));
-}
-
static struct imxi2c_platform_data pcm037_i2c_1_data = {
.bitrate = 100000,
- .init = pcm037_i2c_1_init,
- .exit = pcm037_i2c_1_exit,
};
static struct at24_platform_data board_eeprom = {
};
#endif
-static int sdhc1_pins[] = {
- MX31_PIN_SD1_DATA3__SD1_DATA3,
- MX31_PIN_SD1_DATA2__SD1_DATA2,
- MX31_PIN_SD1_DATA1__SD1_DATA1,
- MX31_PIN_SD1_DATA0__SD1_DATA0,
- MX31_PIN_SD1_CLK__SD1_CLK,
- MX31_PIN_SD1_CMD__SD1_CMD,
-};
+/* Not connected by default */
+#ifdef PCM970_SDHC_RW_SWITCH
+static int pcm970_sdhc1_get_ro(struct device *dev)
+{
+ return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_SFS6));
+}
+#endif
+
+#define SDHC1_GPIO_WP IOMUX_TO_GPIO(MX31_PIN_SFS6)
+#define SDHC1_GPIO_DET IOMUX_TO_GPIO(MX31_PIN_SCK6)
-static int pcm970_sdhc1_init(struct device *dev, irq_handler_t h, void *data)
+static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+ void *data)
{
- return mxc_iomux_setup_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins),
- "sdhc-1");
+ int ret;
+
+ ret = gpio_request(SDHC1_GPIO_DET, "sdhc-detect");
+ if (ret)
+ return ret;
+
+ gpio_direction_input(SDHC1_GPIO_DET);
+
+#ifdef PCM970_SDHC_RW_SWITCH
+ ret = gpio_request(SDHC1_GPIO_WP, "sdhc-wp");
+ if (ret)
+ goto err_gpio_free;
+ gpio_direction_input(SDHC1_GPIO_WP);
+#endif
+
+ ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), detect_irq,
+ IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+ "sdhc-detect", data);
+ if (ret)
+ goto err_gpio_free_2;
+
+ return 0;
+
+err_gpio_free_2:
+#ifdef PCM970_SDHC_RW_SWITCH
+ gpio_free(SDHC1_GPIO_WP);
+err_gpio_free:
+#endif
+ gpio_free(SDHC1_GPIO_DET);
+
+ return ret;
}
static void pcm970_sdhc1_exit(struct device *dev, void *data)
{
- mxc_iomux_release_multiple_pins(sdhc1_pins, ARRAY_SIZE(sdhc1_pins));
+ free_irq(IOMUX_TO_IRQ(MX31_PIN_SCK6), data);
+ gpio_free(SDHC1_GPIO_DET);
+ gpio_free(SDHC1_GPIO_WP);
}
-/* No card and rw detection at the moment */
static struct imxmmc_platform_data sdhc_pdata = {
+#ifdef PCM970_SDHC_RW_SWITCH
+ .get_ro = pcm970_sdhc1_get_ro,
+#endif
.init = pcm970_sdhc1_init,
.exit = pcm970_sdhc1_exit,
};
static struct platform_device *devices[] __initdata = {
&pcm037_flash,
- &pcm037_eth,
&pcm037_sram_device,
};
-static int uart0_pins[] = {
- MX31_PIN_CTS1__CTS1,
- MX31_PIN_RTS1__RTS1,
- MX31_PIN_TXD1__TXD1,
- MX31_PIN_RXD1__RXD1
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
};
-static int uart2_pins[] = {
- MX31_PIN_CSPI3_MOSI__RXD3,
- MX31_PIN_CSPI3_MISO__TXD3
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz Sharp */
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE |
+ FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7DH06-QVGA",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
};
/*
*/
static void __init mxc_board_init(void)
{
+ int ret;
+
+ mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins),
+ "pcm037");
+
platform_add_devices(devices, ARRAY_SIZE(devices));
- mxc_iomux_setup_multiple_pins(uart0_pins, ARRAY_SIZE(uart0_pins), "uart-0");
mxc_register_device(&mxc_uart_device0, &uart_pdata);
-
- mxc_iomux_setup_multiple_pins(uart2_pins, ARRAY_SIZE(uart2_pins), "uart-2");
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
mxc_register_device(&mxc_uart_device2, &uart_pdata);
- mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
/* LAN9217 IRQ pin */
- if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
- "pcm037-eth"))
+ ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1), "lan9217-irq");
+ if (ret)
+ pr_warning("could not get LAN irq gpio\n");
+ else {
gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
+ platform_device_register(&pcm037_eth);
+ }
+
#ifdef CONFIG_I2C_IMX
i2c_register_board_info(1, pcm037_i2c_devices,
#endif
mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
mxc_register_device(&mxcsdhc_device0, &sdhc_pdata);
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+ if (!gpio_usbotg_hs_activate())
+ mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
}
static void __init pcm037_timer_init(void)
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &pcm037_timer,
--- /dev/null
+/*
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/plat-ram.h>
+#include <linux/memory.h>
+#include <linux/gpio.h>
+#include <linux/smc911x.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+#include <mach/i2c.h>
+#endif
+#include <mach/iomux-mx35.h>
+#include <mach/ipu.h>
+#include <mach/mx3fb.h>
+
+#include "devices.h"
+
+static const struct fb_videomode fb_modedb[] = {
+ {
+ /* 240x320 @ 60 Hz */
+ .name = "Sharp-LQ035Q7",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 185925,
+ .left_margin = 9,
+ .right_margin = 16,
+ .upper_margin = 7,
+ .lower_margin = 9,
+ .hsync_len = 1,
+ .vsync_len = 1,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | FB_SYNC_CLK_INVERT | FB_SYNC_CLK_IDLE_EN,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ }, {
+ /* 240x320 @ 60 Hz */
+ .name = "TX090",
+ .refresh = 60,
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 38255,
+ .left_margin = 144,
+ .right_margin = 0,
+ .upper_margin = 7,
+ .lower_margin = 40,
+ .hsync_len = 96,
+ .vsync_len = 1,
+ .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH,
+ .vmode = FB_VMODE_NONINTERLACED,
+ .flag = 0,
+ },
+};
+
+static struct ipu_platform_data mx3_ipu_data = {
+ .irq_base = MXC_IPU_IRQ_START,
+};
+
+static struct mx3fb_platform_data mx3fb_pdata = {
+ .dma_dev = &mx3_ipu.dev,
+ .name = "Sharp-LQ035Q7",
+ .mode = fb_modedb,
+ .num_modes = ARRAY_SIZE(fb_modedb),
+};
+
+static struct physmap_flash_data pcm043_flash_data = {
+ .width = 2,
+};
+
+static struct resource pcm043_flash_resource = {
+ .start = 0xa0000000,
+ .end = 0xa1ffffff,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device pcm043_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &pcm043_flash_data,
+ },
+ .resource = &pcm043_flash_resource,
+ .num_resources = 1,
+};
+
+static struct imxuart_platform_data uart_pdata = {
+ .flags = IMXUART_HAVE_RTSCTS,
+};
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+static struct imxi2c_platform_data pcm043_i2c_1_data = {
+ .bitrate = 50000,
+};
+
+static struct at24_platform_data board_eeprom = {
+ .byte_len = 4096,
+ .page_size = 32,
+ .flags = AT24_FLAG_ADDR16,
+};
+
+static struct i2c_board_info pcm043_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("at24", 0x52), /* E0=0, E1=1, E2=0 */
+ .platform_data = &board_eeprom,
+ }, {
+ I2C_BOARD_INFO("rtc-pcf8563", 0x51),
+ .type = "pcf8563",
+ }
+};
+#endif
+
+static struct platform_device *devices[] __initdata = {
+ &pcm043_flash,
+ &mxc_fec_device,
+};
+
+static struct pad_desc pcm043_pads[] = {
+ /* UART1 */
+ MX35_PAD_CTS1__UART1_CTS,
+ MX35_PAD_RTS1__UART1_RTS,
+ MX35_PAD_TXD1__UART1_TXD_MUX,
+ MX35_PAD_RXD1__UART1_RXD_MUX,
+ /* UART2 */
+ MX35_PAD_CTS2__UART2_CTS,
+ MX35_PAD_RTS2__UART2_RTS,
+ MX35_PAD_TXD2__UART2_TXD_MUX,
+ MX35_PAD_RXD2__UART2_RXD_MUX,
+ /* FEC */
+ MX35_PAD_FEC_TX_CLK__FEC_TX_CLK,
+ MX35_PAD_FEC_RX_CLK__FEC_RX_CLK,
+ MX35_PAD_FEC_RX_DV__FEC_RX_DV,
+ MX35_PAD_FEC_COL__FEC_COL,
+ MX35_PAD_FEC_RDATA0__FEC_RDATA_0,
+ MX35_PAD_FEC_TDATA0__FEC_TDATA_0,
+ MX35_PAD_FEC_TX_EN__FEC_TX_EN,
+ MX35_PAD_FEC_MDC__FEC_MDC,
+ MX35_PAD_FEC_MDIO__FEC_MDIO,
+ MX35_PAD_FEC_TX_ERR__FEC_TX_ERR,
+ MX35_PAD_FEC_RX_ERR__FEC_RX_ERR,
+ MX35_PAD_FEC_CRS__FEC_CRS,
+ MX35_PAD_FEC_RDATA1__FEC_RDATA_1,
+ MX35_PAD_FEC_TDATA1__FEC_TDATA_1,
+ MX35_PAD_FEC_RDATA2__FEC_RDATA_2,
+ MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
+ MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
+ MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+ /* I2C1 */
+ MX35_PAD_I2C1_CLK__I2C1_SCL,
+ MX35_PAD_I2C1_DAT__I2C1_SDA,
+ /* Display */
+ MX35_PAD_LD0__IPU_DISPB_DAT_0,
+ MX35_PAD_LD1__IPU_DISPB_DAT_1,
+ MX35_PAD_LD2__IPU_DISPB_DAT_2,
+ MX35_PAD_LD3__IPU_DISPB_DAT_3,
+ MX35_PAD_LD4__IPU_DISPB_DAT_4,
+ MX35_PAD_LD5__IPU_DISPB_DAT_5,
+ MX35_PAD_LD6__IPU_DISPB_DAT_6,
+ MX35_PAD_LD7__IPU_DISPB_DAT_7,
+ MX35_PAD_LD8__IPU_DISPB_DAT_8,
+ MX35_PAD_LD9__IPU_DISPB_DAT_9,
+ MX35_PAD_LD10__IPU_DISPB_DAT_10,
+ MX35_PAD_LD11__IPU_DISPB_DAT_11,
+ MX35_PAD_LD12__IPU_DISPB_DAT_12,
+ MX35_PAD_LD13__IPU_DISPB_DAT_13,
+ MX35_PAD_LD14__IPU_DISPB_DAT_14,
+ MX35_PAD_LD15__IPU_DISPB_DAT_15,
+ MX35_PAD_LD16__IPU_DISPB_DAT_16,
+ MX35_PAD_LD17__IPU_DISPB_DAT_17,
+ MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC,
+ MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK,
+ MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY,
+ MX35_PAD_CONTRAST__IPU_DISPB_CONTR,
+ MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC,
+ MX35_PAD_D3_REV__IPU_DISPB_D3_REV,
+ MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS,
+ MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init mxc_board_init(void)
+{
+ mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads));
+
+ platform_add_devices(devices, ARRAY_SIZE(devices));
+
+ mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+ mxc_register_device(&mxc_uart_device1, &uart_pdata);
+
+#if defined CONFIG_I2C_IMX || defined CONFIG_I2C_IMX_MODULE
+ i2c_register_board_info(0, pcm043_i2c_devices,
+ ARRAY_SIZE(pcm043_i2c_devices));
+
+ mxc_register_device(&mxc_i2c_device0, &pcm043_i2c_1_data);
+#endif
+
+ mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+ mxc_register_device(&mx3_fb, &mx3fb_pdata);
+}
+
+static void __init pcm043_timer_init(void)
+{
+ mx35_clocks_init();
+}
+
+struct sys_timer pcm043_timer = {
+ .init = pcm043_timer_init,
+};
+
+MACHINE_START(PCM043, "Phytec Phycore pcm043")
+ /* Maintainer: Pengutronix */
+ .phys_io = AIPS1_BASE_ADDR,
+ .io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x100,
+ .map_io = mx35_map_io,
+ .init_irq = mxc_init_irq,
+ .init_machine = mxc_board_init,
+ .timer = &pcm043_timer,
+MACHINE_END
+
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = mxc_map_io,
+ .map_io = mx31_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &qong_timer,
{
int irq;
- vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0);
+ vic_init(__io(io_p2v(NETX_PA_VIC)), 0, ~0, 0);
for (irq = NETX_IRQ_HIF_CHAINED(0); irq <= NETX_IRQ_HIF_LAST; irq++) {
set_irq_chip(irq, &netx_hif_chip);
config MACH_OMAP_H3
bool "TI H3 Support"
depends on ARCH_OMAP1 && ARCH_OMAP16XX
-# select GPIOEXPANDER_OMAP
help
TI OMAP 1710 H3 board support. Say Y here if you have such
a board.
# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o
+# DSP
+obj-$(CONFIG_OMAP_MBOX_FWK) += mailbox_mach.o
+mailbox_mach-objs := mailbox.o
+
led-y := leds.o
# Specific board support
#include <mach/common.h>
#include <mach/dsp_common.h>
#include <mach/omapfb.h>
+#include <mach/hwa742.h>
#include <mach/lcd_mipid.h>
#include <mach/mmc.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
#define ADS7846_PENDOWN_GPIO 15
},
};
+static struct hwa742_platform_data nokia770_hwa742_platform_data = {
+ .te_connected = 1,
+};
+
+static void hwa742_dev_init(void)
+{
+ clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+ omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
+}
/* assume no Mini-AB port */
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap_dsp_init();
+ hwa742_dev_init();
ads7846_dev_init();
mipid_dev_init();
omap_usb_init(&nokia770_usb_config);
arm_idlect1_mask = ~0;
for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
cpu_mask = 0;
if (cpu_is_omap16xx())
#include <mach/clock.h>
#include <mach/sram.h>
#include <mach/tc.h>
-#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/dma.h>
#include <mach/dmtimer.h>
+#include "pm.h"
+
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
* going idle we continue to do idle even if we get
* a clock tick interrupt . .
*/
-void omap_pm_idle(void)
+void omap1_pm_idle(void)
{
extern __u32 arm_idlect1_mask;
__u32 use_idlect1 = arm_idlect1_mask;
#define EN_APICK 6 /* ARM_IDLECT2 */
#define DSP_EN 1 /* ARM_RSTCT1 */
-void omap_pm_suspend(void)
+void omap1_pm_suspend(void)
{
unsigned long arg0 = 0, arg1 = 0;
{
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
- omap_pm_suspend();
+ omap1_pm_suspend();
break;
default:
return -EINVAL;
return -ENODEV;
}
- pm_idle = omap_pm_idle;
+ pm_idle = omap1_pm_idle;
if (cpu_is_omap730())
setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
/*
- * arch/arm/plat-omap/include/mach/pm.h
+ * arch/arm/mach-omap1/pm.h
*
- * Header file for OMAP Power Management Routines
+ * Header file for OMAP1 Power Management Routines
*
* Author: MontaVista Software, Inc.
* support@mvista.com
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __ASM_ARCH_OMAP_PM_H
-#define __ASM_ARCH_OMAP_PM_H
+#ifndef __ARCH_ARM_MACH_OMAP1_PM_H
+#define __ARCH_ARM_MACH_OMAP1_PM_H
/*
* ----------------------------------------------------------------------------
#if !defined(CONFIG_ARCH_OMAP730) && \
!defined(CONFIG_ARCH_OMAP15XX) && \
- !defined(CONFIG_ARCH_OMAP16XX) && \
- !defined(CONFIG_ARCH_OMAP24XX)
+ !defined(CONFIG_ARCH_OMAP16XX)
#warning "Power management for this processor not implemented yet"
#endif
#include <linux/clk.h>
+extern struct kset power_subsys;
+
extern void prevent_idle_sleep(void);
extern void allow_idle_sleep(void);
-extern void omap_pm_idle(void);
-extern void omap_pm_suspend(void);
+extern void omap1_pm_idle(void);
+extern void omap1_pm_suspend(void);
+
extern void omap730_cpu_suspend(unsigned short, unsigned short);
extern void omap1510_cpu_suspend(unsigned short, unsigned short);
extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
- void __iomem *sdrc_power);
extern void omap730_idle_loop_suspend(void);
extern void omap1510_idle_loop_suspend(void);
extern void omap1610_idle_loop_suspend(void);
-extern void omap24xx_idle_loop_suspend(void);
extern unsigned int omap730_cpu_suspend_sz;
extern unsigned int omap1510_cpu_suspend_sz;
extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap24xx_cpu_suspend_sz;
extern unsigned int omap730_idle_loop_suspend_sz;
extern unsigned int omap1510_idle_loop_suspend_sz;
extern unsigned int omap1610_idle_loop_suspend_sz;
-extern unsigned int omap24xx_idle_loop_suspend_sz;
#ifdef CONFIG_OMAP_SERIAL_WAKE
extern void omap_serial_wake_trigger(int enable);
#define MPUI1610_RESTORE(x) omap_writel((mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]), (x))
#define MPUI1610_SHOW(x) mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_##x]
-#define OMAP24XX_SAVE(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x] = x
-#define OMAP24XX_RESTORE(x) x = omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-#define OMAP24XX_SHOW(x) omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_##x]
-
/*
* List of global OMAP registers to preserve.
* More ones like CP and general purpose register values are preserved
#endif
};
-enum omap24xx_save_state {
- OMAP24XX_SLEEP_SAVE_START = 0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR0,
- OMAP24XX_SLEEP_SAVE_INTC_MIR1,
- OMAP24XX_SLEEP_SAVE_INTC_MIR2,
-
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_CM_CLKSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MPU,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_CORE,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_GFX,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_DSP,
- OMAP24XX_SLEEP_SAVE_PM_PWSTCTRL_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_IDLEST1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_GFX,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_CKGEN,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_DSP,
- OMAP24XX_SLEEP_SAVE_CM_IDLEST_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE4_CORE,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_WKUP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_PLL,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_DSP,
- OMAP24XX_SLEEP_SAVE_CM_AUTOIDLE_MDM,
-
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_FCLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN1_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN2_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN3_CORE,
- OMAP24XX_SLEEP_SAVE_CM_ICLKEN4_CORE,
- OMAP24XX_SLEEP_SAVE_GPIO1_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO2_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO4_IRQENABLE1,
- OMAP24XX_SLEEP_SAVE_GPIO3_OE,
- OMAP24XX_SLEEP_SAVE_GPIO4_OE,
- OMAP24XX_SLEEP_SAVE_GPIO3_RISINGDETECT,
- OMAP24XX_SLEEP_SAVE_GPIO3_FALLINGDETECT,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SPI1_NCS2,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_MCBSP1_DX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SSI1_FLAG_TX,
- OMAP24XX_SLEEP_SAVE_CONTROL_PADCONF_SYS_NIRQW0,
- OMAP24XX_SLEEP_SAVE_SIZE
-};
-
#endif /* ASSEMBLER */
#endif /* __ASM_ARCH_OMAP_PM_H */
#include <mach/mux.h>
#include <mach/gpio.h>
#include <mach/fpga.h>
-#ifdef CONFIG_PM
-#include <mach/pm.h>
-#endif
static struct clk * uart1_ck;
static struct clk * uart2_ck;
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <mach/pm.h>
+#include "pm.h"
.text
select ARCH_OMAP_OTG
comment "OMAP Board Type"
- depends on ARCH_OMAP2 || ARCH_OMAP3
+ depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
config MACH_OMAP_GENERIC
bool "Generic OMAP board"
bool "Gumstix Overo board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+config MACH_OMAP3EVM
+ bool "OMAP 3530 EVM board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
config MACH_OMAP3_PANDORA
bool "OMAP3 Pandora"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
config MACH_NOKIA_RX51
bool "Nokia RX-51 board"
depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_ZOOM2
+ bool "OMAP3 Zoom2 board"
+ depends on ARCH_OMAP3 && ARCH_OMAP34XX
+
+config MACH_OMAP_4430SDP
+ bool "OMAP 4430 SDP board"
+ depends on ARCH_OMAP4
#
# Common support
-obj-y := irq.o id.o io.o sdrc.o control.o prcm.o clock.o mux.o \
- devices.o serial.o gpmc.o timer-gp.o powerdomain.o \
- clockdomain.o
+obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
+
+omap-2-3-common = irq.o sdrc.o
+prcm-common = prcm.o powerdomain.o
+clock-common = clock.o clockdomain.o
+
+obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+# SMP support ONLY available for OMAP4
+obj-$(CONFIG_SMP) += omap-smp.o omap-headsmp.o
+obj-$(CONFIG_LOCAL_TIMERS) += timer-mpu.o
+
# Functions loaded to SRAM
obj-$(CONFIG_ARCH_OMAP2420) += sram242x.o
obj-$(CONFIG_ARCH_OMAP2430) += sram243x.o
# Power Management
ifeq ($(CONFIG_PM),y)
-obj-y += pm.o
+obj-$(CONFIG_ARCH_OMAP2) += pm24xx.o
obj-$(CONFIG_ARCH_OMAP24XX) += sleep24xx.o
+obj-$(CONFIG_ARCH_OMAP3) += pm34xx.o sleep34xx.o
+obj-$(CONFIG_PM_DEBUG) += pm-debug.o
endif
# Clock framework
obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o
obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o
+iommu-y += iommu2.o
+iommu-$(CONFIG_ARCH_OMAP3) += omap3-iommu.o
+
+obj-$(CONFIG_OMAP_IOMMU) += $(iommu-y)
+
# Specific board support
obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o
obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o
mmc-twl4030.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3EVM) += board-omap3evm.o \
+ mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o \
mmc-twl4030.o
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o \
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
board-rx51-peripherals.o \
mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP_ZOOM2) += board-zoom2.o \
+ mmc-twl4030.o \
+ board-zoom-debugboard.o
+
+obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o
# Platform specific device init code
-ifeq ($(CONFIG_USB_MUSB_SOC),y)
obj-y += usb-musb.o
-endif
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2) := gpmc-onenand.o
+obj-y += $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
+obj-y += $(smc91x-m) $(smc91x-y)
#include <mach/common.h>
#include <mach/gpmc.h>
#include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
#include "mmc-twl4030.h"
#define SDP2430_CS0_BASE 0x04000000
-#define SDP2430_FLASH_CS 0
-#define SDP2430_SMC91X_CS 5
-
-#define SDP2430_ETHR_GPIO_IRQ 149
+#define SECONDARY_LCD_GPIO 147
static struct mtd_partition sdp2430_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
.resource = &sdp2430_flash_resource,
};
-static struct resource sdp2430_smc91x_resources[] = {
- [0] = {
- .start = SDP2430_CS0_BASE,
- .end = SDP2430_CS0_BASE + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
- .end = OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device sdp2430_smc91x_device = {
- .name = "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+ .name = "sdp2430_lcd",
.id = -1,
- .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources),
- .resource = sdp2430_smc91x_resources,
};
static struct platform_device *sdp2430_devices[] __initdata = {
- &sdp2430_smc91x_device,
&sdp2430_flash_device,
+ &sdp2430_lcd_device,
};
-static inline void __init sdp2430_init_smc91x(void)
-{
- int eth_cs;
- unsigned long cs_mem_base;
- unsigned int rate;
- struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
- eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
- gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */
- if (IS_ERR(gpmc_fck)) {
- WARN_ON(1);
- return;
- }
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 5,
+ .gpio_irq = 149,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
- clk_enable(gpmc_fck);
- rate = clk_get_rate(gpmc_fck);
-
- /* Make sure CS1 timings are correct, for 2430 always muxed */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
- if (rate >= 160000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else if (rate >= 130000000) {
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
- } else { /* rate = 100000000 */
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
- gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
- }
+};
- if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- goto out;
- }
+static void __init board_smc91x_init(void)
+{
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ board_smc91x_data.gpio_irq = 6;
+ else
+ board_smc91x_data.gpio_irq = 29;
- sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
- sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
- udelay(100);
+ gpmc_smc91x_init(&board_smc91x_data);
+}
- if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- SDP2430_ETHR_GPIO_IRQ);
- gpmc_cs_free(eth_cs);
- goto out;
- }
- gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
+#else
-out:
- clk_disable(gpmc_fck);
- clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
}
+#endif
+
static void __init omap_2430sdp_init_irq(void)
{
omap2_init_common_hw(NULL);
omap_init_irq();
omap_gpio_init();
- sdp2430_init_smc91x();
}
static struct omap_uart_config sdp2430_uart_config __initdata = {
static struct omap_board_config_kernel sdp2430_config[] = {
{OMAP_TAG_UART, &sdp2430_uart_config},
+ {OMAP_TAG_LCD, &sdp2430_lcd_config},
};
static void __init omap_2430sdp_init(void)
{
+ int ret;
+
omap2430_i2c_init();
platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
omap_serial_init();
twl4030_mmc_init(mmc);
usb_musb_init();
+ board_smc91x_init();
+
+ /* Turn off secondary LCD backlight */
+ ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+ if (ret == 0)
+ gpio_direction_output(SECONDARY_LCD_GPIO, 0);
}
static void __init omap_2430sdp_map_io(void)
#include <mach/control.h>
#include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
+#include "sdram-qimonda-hyb18m512160af-6.h"
#include "mmc-twl4030.h"
#define CONFIG_DISABLE_HFCLK 1
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1 29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2 6
-#define SDP3430_SMC91X_CS 3
-
#define SDP3430_TS_GPIO_IRQ_SDPV1 3
#define SDP3430_TS_GPIO_IRQ_SDPV2 2
#define TWL4030_MSECURE_GPIO 22
-static struct resource sdp3430_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 0,
- .end = 0,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
- },
-};
-
-static struct platform_device sdp3430_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(sdp3430_smc91x_resources),
- .resource = sdp3430_smc91x_resources,
-};
-
static int sdp3430_keymap[] = {
KEY(0, 0, KEY_LEFT),
KEY(0, 1, KEY_RIGHT),
};
static struct platform_device *sdp3430_devices[] __initdata = {
- &sdp3430_smc91x_device,
&sdp3430_lcd_device,
};
-static inline void __init sdp3430_init_smc91x(void)
-{
- int eth_cs;
- unsigned long cs_mem_base;
- int eth_gpio = 0;
-
- eth_cs = SDP3430_SMC91X_CS;
-
- if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
- sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
- udelay(100);
-
- if (omap_rev() > OMAP3430_REV_ES1_0)
- eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
- else
- eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
- sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
- if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
- printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
- eth_gpio);
- return;
- }
- gpio_direction_input(eth_gpio);
-}
-
static void __init omap_3430sdp_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(hyb18m512160af6_sdrc_params);
omap_init_irq();
omap_gpio_init();
- sdp3430_init_smc91x();
}
static struct omap_uart_config sdp3430_uart_config __initdata = {
return 0;
}
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 3,
+ .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+ IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+ if (omap_rev() > OMAP3430_REV_ES1_0)
+ board_smc91x_data.gpio_irq = 6;
+ else
+ board_smc91x_data.gpio_irq = 29;
+
+ gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
static void __init omap_3430sdp_init(void)
{
omap3430_i2c_init();
ads7846_dev_init();
omap_serial_init();
usb_musb_init();
+ board_smc91x_init();
}
static void __init omap_3430sdp_map_io(void)
--- /dev/null
+/*
+ * Board support file for OMAP4430 SDP.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Based on mach-omap2/board-3430sdp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/common.h>
+#include <mach/control.h>
+#include <mach/timer-gp.h>
+#include <asm/hardware/gic.h>
+
+static struct platform_device sdp4430_lcd_device = {
+ .name = "sdp4430_lcd",
+ .id = -1,
+};
+
+static struct platform_device *sdp4430_devices[] __initdata = {
+ &sdp4430_lcd_device,
+};
+
+static struct omap_uart_config sdp4430_uart_config __initdata = {
+ .enabled_uarts = (1 << 0) | (1 << 1) | (1 << 2),
+};
+
+static struct omap_lcd_config sdp4430_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct omap_board_config_kernel sdp4430_config[] __initdata = {
+ { OMAP_TAG_UART, &sdp4430_uart_config },
+ { OMAP_TAG_LCD, &sdp4430_lcd_config },
+};
+
+static void __init gic_init_irq(void)
+{
+ gic_dist_init(0, IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
+ gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+}
+
+static void __init omap_4430sdp_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(1);
+#endif
+ gic_init_irq();
+ omap_gpio_init();
+}
+
+
+static void __init omap_4430sdp_init(void)
+{
+ platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
+ omap_board_config = sdp4430_config;
+ omap_board_config_size = ARRAY_SIZE(sdp4430_config);
+ omap_serial_init();
+}
+
+static void __init omap_4430sdp_map_io(void)
+{
+ omap2_set_globals_443x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
+ /* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_4430sdp_map_io,
+ .init_irq = omap_4430sdp_init_irq,
+ .init_machine = omap_4430sdp_init,
+ .timer = &omap_timer,
+MACHINE_END
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <linux/workqueue.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <linux/io.h>
#include <linux/smsc911x.h>
#include <asm/delay.h>
#include <mach/control.h>
#include <mach/usb.h>
+#include <mach/keypad.h>
#include "mmc-twl4030.h"
},
};
-static struct platform_device *ldp_devices[] __initdata = {
- &ldp_smsc911x_device,
+static int ldp_twl4030_keymap[] = {
+ KEY(0, 0, KEY_1),
+ KEY(1, 0, KEY_2),
+ KEY(2, 0, KEY_3),
+ KEY(0, 1, KEY_4),
+ KEY(1, 1, KEY_5),
+ KEY(2, 1, KEY_6),
+ KEY(3, 1, KEY_F5),
+ KEY(0, 2, KEY_7),
+ KEY(1, 2, KEY_8),
+ KEY(2, 2, KEY_9),
+ KEY(3, 2, KEY_F6),
+ KEY(0, 3, KEY_F7),
+ KEY(1, 3, KEY_0),
+ KEY(2, 3, KEY_F8),
+ PERSISTENT_KEY(4, 5),
+ KEY(4, 4, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_VOLUMEDOWN),
+ 0
+};
+
+static struct twl4030_keypad_data ldp_kp_twl4030_data = {
+ .rows = 6,
+ .cols = 6,
+ .keymap = ldp_twl4030_keymap,
+ .keymapsize = ARRAY_SIZE(ldp_twl4030_keymap),
+ .rep = 1,
+};
+
+static struct gpio_keys_button ldp_gpio_keys_buttons[] = {
+ [0] = {
+ .code = KEY_ENTER,
+ .gpio = 101,
+ .desc = "enter sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [1] = {
+ .code = KEY_F1,
+ .gpio = 102,
+ .desc = "func 1",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [2] = {
+ .code = KEY_F2,
+ .gpio = 103,
+ .desc = "func 2",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [3] = {
+ .code = KEY_F3,
+ .gpio = 104,
+ .desc = "func 3",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [4] = {
+ .code = KEY_F4,
+ .gpio = 105,
+ .desc = "func 4",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [5] = {
+ .code = KEY_LEFT,
+ .gpio = 106,
+ .desc = "left sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [6] = {
+ .code = KEY_RIGHT,
+ .gpio = 107,
+ .desc = "right sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [7] = {
+ .code = KEY_UP,
+ .gpio = 108,
+ .desc = "up sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+ [8] = {
+ .code = KEY_DOWN,
+ .gpio = 109,
+ .desc = "down sw",
+ .active_low = 1,
+ .debounce_interval = 30,
+ },
+};
+
+static struct gpio_keys_platform_data ldp_gpio_keys = {
+ .buttons = ldp_gpio_keys_buttons,
+ .nbuttons = ARRAY_SIZE(ldp_gpio_keys_buttons),
+ .rep = 1,
+};
+
+static struct platform_device ldp_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &ldp_gpio_keys,
+ },
+};
+
+static int ts_gpio;
+
+/**
+ * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq
+ *
+ * @return - void. If request gpio fails then Flag KERN_ERR.
+ */
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(ts_gpio, "ads7846 irq") < 0) {
+ printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+ return;
+ }
+
+ gpio_direction_input(ts_gpio);
+ omap_set_gpio_debounce(ts_gpio, 1);
+ omap_set_gpio_debounce_time(ts_gpio, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(ts_gpio);
+}
+
+static struct ads7846_platform_data tsc2046_config __initdata = {
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+};
+
+static struct omap2_mcspi_device_config tsc2046_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+static struct spi_board_info ldp_spi_board_info[] __initdata = {
+ [0] = {
+ /*
+ * TSC2046 operates at a max freqency of 2MHz, so
+ * operate slightly below at 1.5MHz
+ */
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &tsc2046_mcspi_config,
+ .irq = 0,
+ .platform_data = &tsc2046_config,
+ },
};
static inline void __init ldp_init_smsc911x(void)
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct platform_device ldp_lcd_device = {
+ .name = "ldp_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config ldp_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
static struct omap_board_config_kernel ldp_config[] __initdata = {
{ OMAP_TAG_UART, &ldp_uart_config },
+ { OMAP_TAG_LCD, &ldp_lcd_config },
+};
+
+static struct twl4030_usb_data ldp_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
};
static struct twl4030_gpio_platform_data ldp_gpio_data = {
.irq_end = TWL4030_GPIO_IRQ_END,
};
+static struct twl4030_madc_platform_data ldp_madc_data = {
+ .irq_line = 1,
+};
+
+static struct regulator_consumer_supply ldp_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data ldp_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &ldp_vmmc1_supply,
+};
+
static struct twl4030_platform_data ldp_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
+ .madc = &ldp_madc_data,
+ .usb = &ldp_usb_data,
+ .vmmc1 = &ldp_vmmc1,
.gpio = &ldp_gpio_data,
+ .keypad = &ldp_kp_twl4030_data,
};
static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = {
{} /* Terminator */
};
+static struct platform_device *ldp_devices[] __initdata = {
+ &ldp_smsc911x_device,
+ &ldp_lcd_device,
+ &ldp_gpio_keys_device,
+};
+
static void __init omap_ldp_init(void)
{
omap_i2c_init();
platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
omap_board_config = ldp_config;
omap_board_config_size = ARRAY_SIZE(ldp_config);
+ ts_gpio = 54;
+ ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio);
+ spi_register_board_info(ldp_spi_board_info,
+ ARRAY_SIZE(ldp_spi_board_info));
+ ads7846_dev_init();
omap_serial_init();
- twl4030_mmc_init(mmc);
usb_musb_init();
+
+ twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ ldp_vmmc1_supply.dev = mmc[0].dev;
}
static void __init omap_ldp_map_io(void)
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
#include <mach/hardware.h>
.resource = &omap3beagle_nand_resource,
};
+#include "sdram-micron-mt46h32m32lf-6.h"
+
static struct omap_uart_config omap3_beagle_uart_config __initdata = {
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
{} /* Terminator */
};
+static struct platform_device omap3_beagle_lcd_device = {
+ .name = "omap3beagle_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static struct regulator_consumer_supply beagle_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply beagle_vsim_supply = {
+ .supply = "vmmc_aux",
+};
+
static struct gpio_led gpio_leds[];
static int beagle_twl_gpio_setup(struct device *dev,
mmc[0].gpio_cd = gpio + 0;
twl4030_mmc_init(mmc);
+ /* link regulators to MMC adapters */
+ beagle_vmmc1_supply.dev = mmc[0].dev;
+ beagle_vsim_supply.dev = mmc[0].dev;
+
/* REVISIT: need ehci-omap hooks for external VBUS
* power switch and overcurrent detect
*/
.setup = beagle_twl_gpio_setup,
};
+static struct regulator_consumer_supply beagle_vdac_supply = {
+ .supply = "vdac",
+ .dev = &omap3_beagle_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply beagle_vdvi_supply = {
+ .supply = "vdvi",
+ .dev = &omap3_beagle_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data beagle_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data beagle_vsim = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 3000000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data beagle_vdac = {
+ .constraints = {
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data beagle_vpll2 = {
+ .constraints = {
+ .name = "VDVI",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &beagle_vdvi_supply,
+};
+
static struct twl4030_platform_data beagle_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
/* platform_data for children goes here */
.gpio = &beagle_gpio_data,
+ .vmmc1 = &beagle_vmmc1,
+ .vsim = &beagle_vsim,
+ .vdac = &beagle_vdac,
+ .vpll2 = &beagle_vpll2,
};
static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = {
static void __init omap3_beagle_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
#ifdef CONFIG_OMAP_32K_TIMER
omap2_gp_clockevent_set_gptimer(12);
omap_gpio_init();
}
-static struct platform_device omap3_beagle_lcd_device = {
- .name = "omap3beagle_lcd",
- .id = -1,
-};
-
-static struct omap_lcd_config omap3_beagle_lcd_config __initdata = {
- .ctrl_name = "internal",
-};
-
static struct gpio_led gpio_leds[] = {
{
.name = "beagleboard::usr0",
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/board-omap3evm.c
+ *
+ * Copyright (C) 2008 Texas Instruments
+ *
+ * Modified from mach-omap2/board-3430sdp.c
+ *
+ * Initial code: Syed Mohammed Khasim
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/leds.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/i2c/twl4030.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/mux.h>
+#include <mach/usb.h>
+#include <mach/common.h>
+#include <mach/mcspi.h>
+#include <mach/keypad.h>
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define OMAP3_EVM_TS_GPIO 175
+
+#define OMAP3EVM_ETHR_START 0x2c000000
+#define OMAP3EVM_ETHR_SIZE 1024
+#define OMAP3EVM_ETHR_GPIO_IRQ 176
+#define OMAP3EVM_SMC911X_CS 5
+
+static struct resource omap3evm_smc911x_resources[] = {
+ [0] = {
+ .start = OMAP3EVM_ETHR_START,
+ .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device omap3evm_smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(omap3evm_smc911x_resources),
+ .resource = &omap3evm_smc911x_resources[0],
+};
+
+static inline void __init omap3evm_init_smc911x(void)
+{
+ int eth_cs;
+ struct clk *l3ck;
+ unsigned int rate;
+
+ eth_cs = OMAP3EVM_SMC911X_CS;
+
+ l3ck = clk_get(NULL, "l3_ck");
+ if (IS_ERR(l3ck))
+ rate = 100000000;
+ else
+ rate = clk_get_rate(l3ck);
+
+ if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+ OMAP3EVM_ETHR_GPIO_IRQ);
+ return;
+ }
+
+ gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+}
+
+static struct omap_uart_config omap3_evm_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = 63,
+ },
+ {} /* Terminator */
+};
+
+static struct gpio_led gpio_leds[] = {
+ {
+ .name = "omap3evm::ledb",
+ /* normally not visible (board underside) */
+ .default_trigger = "default-on",
+ .gpio = -EINVAL, /* gets replaced */
+ .active_low = true,
+ },
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+ .leds = gpio_leds,
+ .num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gpio_led_info,
+ },
+};
+
+
+static int omap3evm_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ /* gpio + 0 is "mmc0_cd" (input/IRQ) */
+ omap_cfg_reg(L8_34XX_GPIO63);
+ mmc[0].gpio_cd = gpio + 0;
+ twl4030_mmc_init(mmc);
+
+ /*
+ * Most GPIOs are for USB OTG. Some are mostly sent to
+ * the P2 connector; notably LEDA for the LCD backlight.
+ */
+
+ /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */
+ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+ platform_device_register(&leds_gpio);
+
+ return 0;
+}
+
+static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+ .use_leds = true,
+ .setup = omap3evm_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data omap3evm_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static int omap3evm_keymap[] = {
+ KEY(0, 0, KEY_LEFT),
+ KEY(0, 1, KEY_RIGHT),
+ KEY(0, 2, KEY_A),
+ KEY(0, 3, KEY_B),
+ KEY(1, 0, KEY_DOWN),
+ KEY(1, 1, KEY_UP),
+ KEY(1, 2, KEY_E),
+ KEY(1, 3, KEY_F),
+ KEY(2, 0, KEY_ENTER),
+ KEY(2, 1, KEY_I),
+ KEY(2, 2, KEY_J),
+ KEY(2, 3, KEY_K),
+ KEY(3, 0, KEY_M),
+ KEY(3, 1, KEY_N),
+ KEY(3, 2, KEY_O),
+ KEY(3, 3, KEY_P)
+};
+
+static struct twl4030_keypad_data omap3evm_kp_data = {
+ .rows = 4,
+ .cols = 4,
+ .keymap = omap3evm_keymap,
+ .keymapsize = ARRAY_SIZE(omap3evm_keymap),
+ .rep = 1,
+};
+
+static struct twl4030_madc_platform_data omap3evm_madc_data = {
+ .irq_line = 1,
+};
+
+static struct twl4030_platform_data omap3evm_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .keypad = &omap3evm_kp_data,
+ .madc = &omap3evm_madc_data,
+ .usb = &omap3evm_usb_data,
+ .gpio = &omap3evm_gpio_data,
+};
+
+static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &omap3evm_twldata,
+ },
+};
+
+static int __init omap3_evm_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
+ ARRAY_SIZE(omap3evm_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct platform_device omap3_evm_lcd_device = {
+ .name = "omap3evm_lcd",
+ .id = -1,
+};
+
+static struct omap_lcd_config omap3_evm_lcd_config __initdata = {
+ .ctrl_name = "internal",
+};
+
+static void ads7846_dev_init(void)
+{
+ if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0)
+ printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
+
+ gpio_direction_input(OMAP3_EVM_TS_GPIO);
+
+ omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1);
+ omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa);
+}
+
+static int ads7846_get_pendown_state(void)
+{
+ return !gpio_get_value(OMAP3_EVM_TS_GPIO);
+}
+
+struct ads7846_platform_data ads7846_config = {
+ .x_max = 0x0fff,
+ .y_max = 0x0fff,
+ .x_plate_ohms = 180,
+ .pressure_max = 255,
+ .debounce_max = 10,
+ .debounce_tol = 3,
+ .debounce_rep = 1,
+ .get_pendown_state = ads7846_get_pendown_state,
+ .keep_vref_on = 1,
+ .settle_delay_usecs = 150,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+ .turbo_mode = 0,
+ .single_channel = 1, /* 0: slave, 1: master */
+};
+
+struct spi_board_info omap3evm_spi_board_info[] = {
+ [0] = {
+ .modalias = "ads7846",
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 1500000,
+ .controller_data = &ads7846_mcspi_config,
+ .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO),
+ .platform_data = &ads7846_config,
+ },
+};
+
+static void __init omap3_evm_init_irq(void)
+{
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
+ omap_init_irq();
+ omap_gpio_init();
+ omap3evm_init_smc911x();
+}
+
+static struct omap_board_config_kernel omap3_evm_config[] __initdata = {
+ { OMAP_TAG_UART, &omap3_evm_uart_config },
+ { OMAP_TAG_LCD, &omap3_evm_lcd_config },
+};
+
+static struct platform_device *omap3_evm_devices[] __initdata = {
+ &omap3_evm_lcd_device,
+ &omap3evm_smc911x_device,
+};
+
+static void __init omap3_evm_init(void)
+{
+ omap3_evm_i2c_init();
+
+ platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
+ omap_board_config = omap3_evm_config;
+ omap_board_config_size = ARRAY_SIZE(omap3_evm_config);
+
+ spi_register_board_info(omap3evm_spi_board_info,
+ ARRAY_SIZE(omap3evm_spi_board_info));
+
+ omap_serial_init();
+ usb_musb_init();
+ ads7846_dev_init();
+}
+
+static void __init omap3_evm_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3EVM, "OMAP3 EVM")
+ /* Maintainer: Syed Mohammed Khasim - Texas Instruments */
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap3_evm_map_io,
+ .init_irq = omap3_evm_init_irq,
+ .init_machine = omap3_evm_init,
+ .timer = &omap_timer,
+MACHINE_END
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
+#include <linux/regulator/machine.h>
#include <linux/i2c/twl4030.h>
+#include <linux/leds.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/hardware.h>
#include <mach/mcspi.h>
#include <mach/usb.h>
+#include <mach/keypad.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
#define OMAP3_PANDORA_TS_GPIO 94
+/* hardware debounce: (value + 1) * 31us */
+#define GPIO_DEBOUNCE_TIME 127
+
+static struct gpio_led pandora_gpio_leds[] = {
+ {
+ .name = "pandora::sd1",
+ .default_trigger = "mmc0",
+ .gpio = 128,
+ }, {
+ .name = "pandora::sd2",
+ .default_trigger = "mmc1",
+ .gpio = 129,
+ }, {
+ .name = "pandora::bluetooth",
+ .gpio = 158,
+ }, {
+ .name = "pandora::wifi",
+ .gpio = 159,
+ },
+};
+
+static struct gpio_led_platform_data pandora_gpio_led_data = {
+ .leds = pandora_gpio_leds,
+ .num_leds = ARRAY_SIZE(pandora_gpio_leds),
+};
+
+static struct platform_device pandora_leds_gpio = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_gpio_led_data,
+ },
+};
+
+#define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \
+{ \
+ .gpio = gpio_num, \
+ .type = ev_type, \
+ .code = ev_code, \
+ .active_low = act_low, \
+ .desc = "btn " descr, \
+}
+
+#define GPIO_BUTTON_LOW(gpio_num, event_code, description) \
+ GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description)
+
+static struct gpio_keys_button pandora_gpio_keys[] = {
+ GPIO_BUTTON_LOW(110, KEY_UP, "up"),
+ GPIO_BUTTON_LOW(103, KEY_DOWN, "down"),
+ GPIO_BUTTON_LOW(96, KEY_LEFT, "left"),
+ GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"),
+ GPIO_BUTTON_LOW(111, BTN_A, "a"),
+ GPIO_BUTTON_LOW(106, BTN_B, "b"),
+ GPIO_BUTTON_LOW(109, BTN_X, "x"),
+ GPIO_BUTTON_LOW(101, BTN_Y, "y"),
+ GPIO_BUTTON_LOW(102, BTN_TL, "l"),
+ GPIO_BUTTON_LOW(97, BTN_TL2, "l2"),
+ GPIO_BUTTON_LOW(105, BTN_TR, "r"),
+ GPIO_BUTTON_LOW(107, BTN_TR2, "r2"),
+ GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"),
+ GPIO_BUTTON_LOW(99, KEY_MENU, "menu"),
+ GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"),
+ GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"),
+ GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"),
+};
+
+static struct gpio_keys_platform_data pandora_gpio_key_info = {
+ .buttons = pandora_gpio_keys,
+ .nbuttons = ARRAY_SIZE(pandora_gpio_keys),
+};
+
+static struct platform_device pandora_keys_gpio = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &pandora_gpio_key_info,
+ },
+};
+
+static void __init pandora_keys_gpio_init(void)
+{
+ /* set debounce time for GPIO banks 4 and 6 */
+ omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME);
+ omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME);
+}
+
+static int pandora_keypad_map[] = {
+ /* col, row, code */
+ KEY(0, 0, KEY_9),
+ KEY(0, 1, KEY_0),
+ KEY(0, 2, KEY_BACKSPACE),
+ KEY(0, 3, KEY_O),
+ KEY(0, 4, KEY_P),
+ KEY(0, 5, KEY_K),
+ KEY(0, 6, KEY_L),
+ KEY(0, 7, KEY_ENTER),
+ KEY(1, 0, KEY_8),
+ KEY(1, 1, KEY_7),
+ KEY(1, 2, KEY_6),
+ KEY(1, 3, KEY_5),
+ KEY(1, 4, KEY_4),
+ KEY(1, 5, KEY_3),
+ KEY(1, 6, KEY_2),
+ KEY(1, 7, KEY_1),
+ KEY(2, 0, KEY_I),
+ KEY(2, 1, KEY_U),
+ KEY(2, 2, KEY_Y),
+ KEY(2, 3, KEY_T),
+ KEY(2, 4, KEY_R),
+ KEY(2, 5, KEY_E),
+ KEY(2, 6, KEY_W),
+ KEY(2, 7, KEY_Q),
+ KEY(3, 0, KEY_J),
+ KEY(3, 1, KEY_H),
+ KEY(3, 2, KEY_G),
+ KEY(3, 3, KEY_F),
+ KEY(3, 4, KEY_D),
+ KEY(3, 5, KEY_S),
+ KEY(3, 6, KEY_A),
+ KEY(3, 7, KEY_LEFTSHIFT),
+ KEY(4, 0, KEY_N),
+ KEY(4, 1, KEY_B),
+ KEY(4, 2, KEY_V),
+ KEY(4, 3, KEY_C),
+ KEY(4, 4, KEY_X),
+ KEY(4, 5, KEY_Z),
+ KEY(4, 6, KEY_DOT),
+ KEY(4, 7, KEY_COMMA),
+ KEY(5, 0, KEY_M),
+ KEY(5, 1, KEY_SPACE),
+ KEY(5, 2, KEY_FN),
+};
+
+static struct twl4030_keypad_data pandora_kp_data = {
+ .rows = 8,
+ .cols = 6,
+ .keymap = pandora_keypad_map,
+ .keymapsize = ARRAY_SIZE(pandora_keypad_map),
+ .rep = 1,
+};
+
static struct twl4030_hsmmc_info omap3pandora_mmc[] = {
{
.mmc = 1,
.enabled_uarts = (1 << 2), /* UART3 */
};
+static struct regulator_consumer_supply pandora_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static struct regulator_consumer_supply pandora_vmmc2_supply = {
+ .supply = "vmmc",
+};
+
static int omap3pandora_twl_gpio_setup(struct device *dev,
unsigned gpio, unsigned ngpio)
{
omap3pandora_mmc[1].gpio_cd = gpio + 1;
twl4030_mmc_init(omap3pandora_mmc);
+ /* link regulators to MMC adapters */
+ pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev;
+ pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev;
+
return 0;
}
.setup = omap3pandora_twl_gpio_setup,
};
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data pandora_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */
+static struct regulator_init_data pandora_vmmc2 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &pandora_vmmc2_supply,
+};
+
static struct twl4030_usb_data omap3pandora_usb_data = {
.usb_mode = T2_USB_MODE_ULPI,
};
.irq_end = TWL4030_IRQ_END,
.gpio = &omap3pandora_gpio_data,
.usb = &omap3pandora_usb_data,
+ .vmmc1 = &pandora_vmmc1,
+ .vmmc2 = &pandora_vmmc2,
+ .keypad = &pandora_kp_data,
};
static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = {
static void __init omap3pandora_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
static struct platform_device *omap3pandora_devices[] __initdata = {
&omap3pandora_lcd_device,
+ &pandora_leds_gpio,
+ &pandora_keys_gpio,
};
static void __init omap3pandora_init(void)
spi_register_board_info(omap3pandora_spi_board_info,
ARRAY_SIZE(omap3pandora_spi_board_info));
omap3pandora_ads7846_init();
+ pandora_keys_gpio_init();
usb_musb_init();
}
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/i2c/twl4030.h>
+#include <linux/regulator/machine.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <mach/nand.h>
#include <mach/usb.h>
+#include "sdram-micron-mt46h32m32lf-6.h"
#include "mmc-twl4030.h"
#define OVERO_GPIO_BT_XGATE 15
.enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
};
+static struct twl4030_hsmmc_info mmc[] = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {
+ .mmc = 2,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ .transceiver = true,
+ .ocr_mask = 0x00100000, /* 3.3V */
+ },
+ {} /* Terminator */
+};
+
+static struct regulator_consumer_supply overo_vmmc1_supply = {
+ .supply = "vmmc",
+};
+
+static int overo_twl_gpio_setup(struct device *dev,
+ unsigned gpio, unsigned ngpio)
+{
+ twl4030_mmc_init(mmc);
+
+ overo_vmmc1_supply.dev = mmc[0].dev;
+
+ return 0;
+}
+
static struct twl4030_gpio_platform_data overo_gpio_data = {
.gpio_base = OMAP_MAX_GPIO_LINES,
.irq_base = TWL4030_GPIO_IRQ_BASE,
.irq_end = TWL4030_GPIO_IRQ_END,
+ .setup = overo_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data overo_usb_data = {
+ .usb_mode = T2_USB_MODE_ULPI,
+};
+
+static struct regulator_init_data overo_vmmc1 = {
+ .constraints = {
+ .min_uV = 1850000,
+ .max_uV = 3150000,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &overo_vmmc1_supply,
};
+/* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
+
static struct twl4030_platform_data overo_twldata = {
.irq_base = TWL4030_IRQ_BASE,
.irq_end = TWL4030_IRQ_END,
.gpio = &overo_gpio_data,
+ .usb = &overo_usb_data,
+ .vmmc1 = &overo_vmmc1,
};
static struct i2c_board_info __initdata overo_i2c_boardinfo[] = {
{
- I2C_BOARD_INFO("twl4030", 0x48),
+ I2C_BOARD_INFO("tps65950", 0x48),
.flags = I2C_CLIENT_WAKE,
.irq = INT_34XX_SYS_NIRQ,
.platform_data = &overo_twldata,
static void __init overo_init_irq(void)
{
- omap2_init_common_hw(NULL);
+ omap2_init_common_hw(mt46h32m32lf6_sdrc_params);
omap_init_irq();
omap_gpio_init();
}
&overo_lcd_device,
};
-static struct twl4030_hsmmc_info mmc[] __initdata = {
- {
- .mmc = 1,
- .wires = 4,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- },
- {
- .mmc = 2,
- .wires = 4,
- .gpio_cd = -EINVAL,
- .gpio_wp = -EINVAL,
- .transceiver = true,
- },
- {} /* Terminator */
-};
-
static void __init overo_init(void)
{
overo_i2c_init();
omap_board_config = overo_config;
omap_board_config_size = ARRAY_SIZE(overo_config);
omap_serial_init();
- twl4030_mmc_init(mmc);
overo_flash_init();
usb_musb_init();
overo_ads7846_init();
#include <mach/dma.h>
#include <mach/gpmc.h>
#include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
#include "mmc-twl4030.h"
-
-#define SMC91X_CS 1
-#define SMC91X_GPIO_IRQ 54
-#define SMC91X_GPIO_RESET 164
-#define SMC91X_GPIO_PWRDWN 86
-
-static struct resource rx51_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
- },
-};
-
-static struct platform_device rx51_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .num_resources = ARRAY_SIZE(rx51_smc91x_resources),
- .resource = rx51_smc91x_resources,
-};
+#define SYSTEM_REV_B_USES_VAUX3 0x1699
+#define SYSTEM_REV_S_USES_VAUX3 0x8
static int rx51_keymap[] = {
KEY(0, 0, KEY_Q),
.rep = 1,
};
-static struct platform_device *rx51_peripherals_devices[] = {
- &rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
- struct gpmc_timings t;
- const int t2_r = 45; /* t2 in Figure 12.10 */
- const int t2_w = 30; /* t2 in Figure 12.11 */
- const int t3 = 15; /* t3 in Figure 12.10 */
- const int t5_r = 0; /* t5 in Figure 12.10 */
- const int t6_r = 45; /* t6 in Figure 12.10 */
- const int t6_w = 0; /* t6 in Figure 12.11 */
- const int t7_w = 15; /* t7 in Figure 12.11 */
- const int t15 = 12; /* t15 in Figure 12.2 */
- const int t20 = 185; /* t20 in Figure 12.2 */
-
- memset(&t, 0, sizeof(t));
-
- t.cs_on = t15;
- t.cs_rd_off = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.cs_wr_off = t3 + t2_w + t6_w; /* Figure 12.11 */
- t.adv_on = t3; /* Figure 12.10 */
- t.adv_rd_off = t3 + t2_r; /* Figure 12.10 */
- t.adv_wr_off = t3 + t2_w; /* Figure 12.11 */
- t.oe_off = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.oe_on = t.oe_off - t6_r; /* Figure 12.10 */
- t.we_off = t3 + t2_w + t6_w; /* Figure 12.11 */
- t.we_on = t.we_off - t7_w; /* Figure 12.11 */
- t.rd_cycle = t20; /* Figure 12.2 */
- t.wr_cycle = t20; /* Figure 12.4 */
- t.access = t3 + t2_r + t5_r; /* Figure 12.10 */
- t.wr_access = t3 + t2_w + t6_w; /* Figure 12.11 */
-
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
- return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
- unsigned long cs_mem_base;
- int ret;
-
- omap_cfg_reg(U8_34XX_GPIO54_DOWN);
- omap_cfg_reg(G25_34XX_GPIO86_OUT);
- omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
- if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
- rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
- smc91x_init_gpmc(SMC91X_CS);
-
- if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
- goto free1;
-
- gpio_direction_input(SMC91X_GPIO_IRQ);
- rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
- ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
- if (ret)
- goto free2;
- gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
- ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
- if (ret)
- goto free3;
- gpio_direction_output(SMC91X_GPIO_RESET, 0);
- gpio_set_value(SMC91X_GPIO_RESET, 1);
- msleep(100);
- gpio_set_value(SMC91X_GPIO_RESET, 0);
-
- return;
-
-free3:
- gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
- gpio_free(SMC91X_GPIO_IRQ);
-free1:
- gpmc_cs_free(SMC91X_CS);
-
- printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
static struct twl4030_madc_platform_data rx51_madc_data = {
.irq_line = 1,
};
};
/* VAUX3 - adds more power to VIO_18 rail */
-static struct regulator_init_data rx51_vaux3 = {
+static struct regulator_init_data rx51_vaux3_cam = {
.constraints = {
.name = "VCAM_DIG_18",
.min_uV = 1800000,
},
};
+static struct regulator_init_data rx51_vaux3_mmc = {
+ .constraints = {
+ .name = "VMMC2_30",
+ .min_uV = 2800000,
+ .max_uV = 3000000,
+ .apply_uV = true,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL
+ | REGULATOR_MODE_STANDBY,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
+ | REGULATOR_CHANGE_MODE
+ | REGULATOR_CHANGE_STATUS,
+ },
+ .num_consumer_supplies = 1,
+ .consumer_supplies = &rx51_vmmc2_supply,
+};
+
static struct regulator_init_data rx51_vaux4 = {
.constraints = {
.name = "VCAM_ANA_28",
.vaux1 = &rx51_vaux1,
.vaux2 = &rx51_vaux2,
- .vaux3 = &rx51_vaux3,
.vaux4 = &rx51_vaux4,
.vmmc1 = &rx51_vmmc1,
- .vmmc2 = &rx51_vmmc2,
.vsim = &rx51_vsim,
.vdac = &rx51_vdac,
};
static int __init rx51_i2c_init(void)
{
+ if ((system_rev >= SYSTEM_REV_S_USES_VAUX3 && system_rev < 0x100) ||
+ system_rev >= SYSTEM_REV_B_USES_VAUX3)
+ rx51_twldata.vaux3 = &rx51_vaux3_mmc;
+ else {
+ rx51_twldata.vaux3 = &rx51_vaux3_cam;
+ rx51_twldata.vmmc2 = &rx51_vmmc2;
+ }
omap_register_i2c_bus(1, 2600, rx51_peripherals_i2c_board_info_1,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_1));
omap_register_i2c_bus(2, 100, NULL, 0);
return 0;
}
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = 0x20000,
+ .mask_flags = MTD_WRITEABLE, /* Force read-only */
+ },
+ {
+ .name = "config",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x60000,
+ },
+ {
+ .name = "log",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x40000,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x200000,
+ },
+ {
+ .name = "initfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 0x200000,
+ },
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+ .cs = 0,
+ .gpio_irq = 65,
+ .parts = onenand_partitions,
+ .nr_parts = ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+ gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+ .cs = 1,
+ .gpio_irq = 54,
+ .gpio_pwrdwn = 86,
+ .gpio_reset = 164,
+ .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+ omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+ omap_cfg_reg(G25_34XX_GPIO86_OUT);
+ omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+ gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
void __init rx51_peripherals_init(void)
{
- platform_add_devices(rx51_peripherals_devices,
- ARRAY_SIZE(rx51_peripherals_devices));
rx51_i2c_init();
- rx51_init_smc91x();
+ board_onenand_init();
+ board_smc91x_init();
}
--- /dev/null
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+
+#include <mach/gpmc.h>
+
+#define ZOOM2_SMSC911X_CS 7
+#define ZOOM2_SMSC911X_GPIO 158
+#define ZOOM2_QUADUART_CS 3
+#define ZOOM2_QUADUART_GPIO 102
+#define QUART_CLK 1843200
+#define DEBUG_BASE 0x08000000
+#define ZOOM2_ETHR_START DEBUG_BASE
+
+static struct resource zoom2_smsc911x_resources[] = {
+ [0] = {
+ .start = ZOOM2_ETHR_START,
+ .end = ZOOM2_ETHR_START + SZ_4K,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+ },
+};
+
+static struct smsc911x_platform_config zoom2_smsc911x_config = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+static struct platform_device zoom2_smsc911x_device = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(zoom2_smsc911x_resources),
+ .resource = zoom2_smsc911x_resources,
+ .dev = {
+ .platform_data = &zoom2_smsc911x_config,
+ },
+};
+
+static inline void __init zoom2_init_smsc911x(void)
+{
+ int eth_cs;
+ unsigned long cs_mem_base;
+ int eth_gpio = 0;
+
+ eth_cs = ZOOM2_SMSC911X_CS;
+
+ if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
+ return;
+ }
+
+ zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+ zoom2_smsc911x_resources[0].end = cs_mem_base + 0xff;
+
+ eth_gpio = ZOOM2_SMSC911X_GPIO;
+
+ zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+
+ if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
+ eth_gpio);
+ return;
+ }
+ gpio_direction_input(eth_gpio);
+}
+
+static struct plat_serial8250_port serial_platform_data[] = {
+ {
+ .mapbase = 0x10000000,
+ .irq = OMAP_GPIO_IRQ(102),
+ .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP|UPF_SHARE_IRQ,
+ .iotype = UPIO_MEM,
+ .regshift = 1,
+ .uartclk = QUART_CLK,
+ }, {
+ .flags = 0
+ }
+};
+
+static struct platform_device zoom2_debugboard_serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM1,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
+static inline void __init zoom2_init_quaduart(void)
+{
+ int quart_cs;
+ unsigned long cs_mem_base;
+ int quart_gpio = 0;
+
+ quart_cs = ZOOM2_QUADUART_CS;
+
+ if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem"
+ "for Quad UART(TL16CP754C)\n");
+ return;
+ }
+
+ quart_gpio = ZOOM2_QUADUART_GPIO;
+
+ if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
+ quart_gpio);
+ return;
+ }
+ gpio_direction_input(quart_gpio);
+}
+
+static inline int omap_zoom2_debugboard_detect(void)
+{
+ int debug_board_detect = 0;
+
+ debug_board_detect = ZOOM2_SMSC911X_GPIO;
+
+ if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
+ printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+ "board detect\n", debug_board_detect);
+ return 0;
+ }
+ gpio_direction_input(debug_board_detect);
+
+ if (!gpio_get_value(debug_board_detect)) {
+ gpio_free(debug_board_detect);
+ return 0;
+ }
+ return 1;
+}
+
+static struct platform_device *zoom2_devices[] __initdata = {
+ &zoom2_smsc911x_device,
+ &zoom2_debugboard_serial_device,
+};
+
+int __init omap_zoom2_debugboard_init(void)
+{
+ if (!omap_zoom2_debugboard_detect())
+ return 0;
+
+ zoom2_init_smsc911x();
+ zoom2_init_quaduart();
+ return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl4030.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/common.h>
+#include <mach/usb.h>
+
+#include "mmc-twl4030.h"
+
+static void __init omap_zoom2_init_irq(void)
+{
+ omap2_init_common_hw(NULL);
+ omap_init_irq();
+ omap_gpio_init();
+}
+
+static struct omap_uart_config zoom2_uart_config __initdata = {
+ .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
+};
+
+static struct omap_board_config_kernel zoom2_config[] __initdata = {
+ { OMAP_TAG_UART, &zoom2_uart_config },
+};
+
+static struct twl4030_gpio_platform_data zoom2_gpio_data = {
+ .gpio_base = OMAP_MAX_GPIO_LINES,
+ .irq_base = TWL4030_GPIO_IRQ_BASE,
+ .irq_end = TWL4030_GPIO_IRQ_END,
+};
+
+static struct twl4030_platform_data zoom2_twldata = {
+ .irq_base = TWL4030_IRQ_BASE,
+ .irq_end = TWL4030_IRQ_END,
+
+ /* platform_data for children goes here */
+ .gpio = &zoom2_gpio_data,
+};
+
+static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
+ {
+ I2C_BOARD_INFO("twl4030", 0x48),
+ .flags = I2C_CLIENT_WAKE,
+ .irq = INT_34XX_SYS_NIRQ,
+ .platform_data = &zoom2_twldata,
+ },
+};
+
+static int __init omap_i2c_init(void)
+{
+ omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
+ ARRAY_SIZE(zoom2_i2c_boardinfo));
+ omap_register_i2c_bus(2, 400, NULL, 0);
+ omap_register_i2c_bus(3, 400, NULL, 0);
+ return 0;
+}
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+ {
+ .mmc = 1,
+ .wires = 4,
+ .gpio_cd = -EINVAL,
+ .gpio_wp = -EINVAL,
+ },
+ {} /* Terminator */
+};
+
+extern int __init omap_zoom2_debugboard_init(void);
+
+static void __init omap_zoom2_init(void)
+{
+ omap_i2c_init();
+ omap_board_config = zoom2_config;
+ omap_board_config_size = ARRAY_SIZE(zoom2_config);
+ omap_serial_init();
+ omap_zoom2_debugboard_init();
+ twl4030_mmc_init(mmc);
+ usb_musb_init();
+}
+
+static void __init omap_zoom2_map_io(void)
+{
+ omap2_set_globals_343x();
+ omap2_map_common_io();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+ .phys_io = 0x48000000,
+ .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc,
+ .boot_params = 0x80000100,
+ .map_io = omap_zoom2_map_io,
+ .init_irq = omap_zoom2_init_irq,
+ .init_machine = omap_zoom2_init,
+ .timer = &omap_timer,
+MACHINE_END
return;
prm_write_mod_reg(OMAP24XX_VALID_CONFIG, OMAP24XX_GR_MOD,
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
/* OCP barrier */
- prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET);
+ prm_read_mod_reg(OMAP24XX_GR_MOD, OMAP2_PRCM_CLKCFG_CTRL_OFFSET);
}
/*
const struct clksel_rate *clkr;
u32 last_div = 0;
- printk(KERN_INFO "clock: clksel_round_rate_div: %s target_rate %ld\n",
- clk->name, target_rate);
+ pr_debug("clock: clksel_round_rate_div: %s target_rate %ld\n",
+ clk->name, target_rate);
*new_div = 1;
/* Sanity check */
if (clkr->div <= last_div)
- printk(KERN_ERR "clock: clksel_rate table not sorted "
+ pr_err("clock: clksel_rate table not sorted "
"for clock %s", clk->name);
last_div = clkr->div;
}
if (!clkr->div) {
- printk(KERN_ERR "clock: Could not find divisor for target "
+ pr_err("clock: Could not find divisor for target "
"rate %ld for clock %s parent %s\n", target_rate,
clk->name, clk->parent->name);
return ~0;
*new_div = clkr->div;
- printk(KERN_INFO "clock: new_div = %d, new_rate = %ld\n", *new_div,
- (clk->parent->rate / clkr->div));
+ pr_debug("clock: new_div = %d, new_rate = %ld\n", *new_div,
+ (clk->parent->rate / clkr->div));
return (clk->parent->rate / clkr->div);
}
if ((regval32 & (1 << clk->enable_bit)) == v)
return;
- printk(KERN_INFO "Disabling unused clock \"%s\"\n", clk->name);
+ printk(KERN_DEBUG "Disabling unused clock \"%s\"\n", clk->name);
if (cpu_is_omap34xx()) {
omap2_clk_enable(clk);
omap2_clk_disable(clk);
static struct clk *vclk;
static struct clk *sclk;
+static void __iomem *prcm_clksrc_ctrl;
+
/*-------------------------------------------------------------------------
* Omap24xx specific clock functions
*-------------------------------------------------------------------------*/
{
u32 pcc;
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ pcc = __raw_readl(prcm_clksrc_ctrl);
- __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ __raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
return 0;
}
{
u32 pcc;
- pcc = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ pcc = __raw_readl(prcm_clksrc_ctrl);
- __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK,
- OMAP24XX_PRCM_CLKSRC_CTRL);
+ __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
}
static const struct clkops clkops_oscck = {
{
u32 div;
- div = __raw_readl(OMAP24XX_PRCM_CLKSRC_CTRL);
+ div = __raw_readl(prcm_clksrc_ctrl);
div &= OMAP_SYSCLKDIV_MASK;
div >>= OMAP_SYSCLKDIV_SHIFT;
struct omap_clk *c;
u32 clkrate;
- if (cpu_is_omap242x())
+ if (cpu_is_omap242x()) {
+ prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_242X;
- else if (cpu_is_omap2430())
+ } else if (cpu_is_omap2430()) {
+ prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
cpu_mask = RATE_IN_243X;
+ }
clk_init(&omap2_clk_functions);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
#include "cm-regbits-24xx.h"
#include "sdrc.h"
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
static unsigned long omap2_table_mpu_recalc(struct clk *clk);
static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
CLK(NULL, "sgx_fck", &sgx_fck, CK_3430ES2),
CLK(NULL, "sgx_ick", &sgx_ick, CK_3430ES2),
CLK(NULL, "d2d_26m_fck", &d2d_26m_fck, CK_3430ES1),
+ CLK(NULL, "modem_fck", &modem_fck, CK_343X),
+ CLK(NULL, "sad2d_ick", &sad2d_ick, CK_343X),
+ CLK(NULL, "mad2d_ick", &mad2d_ick, CK_343X),
CLK(NULL, "gpt10_fck", &gpt10_fck, CK_343X),
CLK(NULL, "gpt11_fck", &gpt11_fck, CK_343X),
CLK(NULL, "cpefuse_fck", &cpefuse_fck, CK_3430ES2),
#define MAX_DPLL_WAIT_TRIES 1000000
+#define MIN_SDRC_DLL_LOCK_FREQ 83000000
+
/**
* omap3_dpll_recalc - recalculate DPLL rate
* @clk: DPLL struct clk
static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
{
u32 new_div = 0;
+ u32 unlock_dll = 0;
unsigned long validrate, sdrcrate;
struct omap_sdrc_params *sp;
if (!sp)
return -EINVAL;
- pr_info("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
- validrate);
- pr_info("clock: SDRC timing params used: %08x %08x %08x\n",
- sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
+ if (sdrcrate < MIN_SDRC_DLL_LOCK_FREQ) {
+ pr_debug("clock: will unlock SDRC DLL\n");
+ unlock_dll = 1;
+ }
+
+ pr_debug("clock: changing CORE DPLL rate from %lu to %lu\n", clk->rate,
+ validrate);
+ pr_debug("clock: SDRC timing params used: %08x %08x %08x\n",
+ sp->rfr_ctrl, sp->actim_ctrla, sp->actim_ctrlb);
/* REVISIT: SRAM code doesn't support other M2 divisors yet */
WARN_ON(new_div != 1 && new_div != 2);
/* REVISIT: Add SDRC_MR changing to this code also */
omap3_configure_core_dpll(sp->rfr_ctrl, sp->actim_ctrla,
- sp->actim_ctrlb, new_div);
+ sp->actim_ctrlb, new_div, unlock_dll);
return 0;
}
clk_init(&omap2_clk_functions);
for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
- clk_init_one(c->lk.clk);
+ clk_preinit(c->lk.clk);
for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
if (c->cpu & cpu_clkflg) {
#include "prm.h"
#include "prm-regbits-34xx.h"
+#define OMAP_CM_REGADDR OMAP34XX_CM_REGADDR
+
static unsigned long omap3_dpll_recalc(struct clk *clk);
static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
static void omap3_dpll_allow_idle(struct clk *clk);
.recalc = &followparent_recalc,
};
+static struct clk modem_fck = {
+ .name = "modem_fck",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &sys_ck,
+ .init = &omap2_init_clk_clkdm,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+ .enable_bit = OMAP3430_EN_MODEM_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+ .name = "sad2d_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+ .enable_bit = OMAP3430_EN_SAD2D_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+ .name = "mad2d_ick",
+ .ops = &clkops_omap2_dflt_wait,
+ .parent = &l3_ick,
+ .enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+ .enable_bit = OMAP3430_EN_MAD2D_SHIFT,
+ .clkdm_name = "d2d_clkdm",
+ .recalc = &followparent_recalc,
+};
+
static const struct clksel omap343x_gpt_clksel[] = {
{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
{ .parent = &sys_ck, .rates = gpt_sys_rates },
.recalc = &omap2_clksel_recalc,
};
-/* XXX MDM_INTC_ICK, SAD2D_ICK ?? */
-
/* SECURITY_L4_ICK2 based clocks */
static struct clk security_l4_ick2 = {
static struct clockdomain d2d_clkdm = {
.name = "d2d_clkdm",
.pwrdm = { .name = "core_pwrdm" },
- .flags = CLKDM_CAN_HWSUP,
+ .flags = CLKDM_CAN_HWSUP_SWSUP,
.clktrctrl_mask = OMAP3430ES1_CLKTRCTRL_D2D_MASK,
.omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430),
};
#define OMAP3430_CLKACTIVITY_MPU_MASK (1 << 0)
/* CM_FCLKEN1_CORE specific bits */
+#define OMAP3430_EN_MODEM (1 << 31)
+#define OMAP3430_EN_MODEM_SHIFT 31
/* CM_ICLKEN1_CORE specific bits */
#define OMAP3430_EN_ICR (1 << 29)
#define OMAP3430_EN_MAILBOXES_SHIFT 7
#define OMAP3430_EN_OMAPCTRL (1 << 6)
#define OMAP3430_EN_OMAPCTRL_SHIFT 6
+#define OMAP3430_EN_SAD2D (1 << 3)
+#define OMAP3430_EN_SAD2D_SHIFT 3
#define OMAP3430_EN_SDRC (1 << 1)
#define OMAP3430_EN_SDRC_SHIFT 1
#define OMAP3430_EN_DES1 (1 << 0)
#define OMAP3430_EN_DES1_SHIFT 0
+/* CM_ICLKEN3_CORE */
+#define OMAP3430_EN_MAD2D_SHIFT 3
+#define OMAP3430_EN_MAD2D (1 << 3)
+
/* CM_FCLKEN3_CORE specific bits */
#define OMAP3430ES2_EN_TS_SHIFT 1
#define OMAP3430ES2_EN_TS_MASK (1 << 1)
#define OMAP3430ES2_ST_CPEFUSE_MASK (1 << 0)
/* CM_AUTOIDLE1_CORE */
+#define OMAP3430_AUTO_MODEM (1 << 31)
+#define OMAP3430_AUTO_MODEM_SHIFT 31
#define OMAP3430ES2_AUTO_MMC3 (1 << 30)
#define OMAP3430ES2_AUTO_MMC3_SHIFT 30
#define OMAP3430ES2_AUTO_ICR (1 << 29)
#define OMAP3430_AUTO_HSOTGUSB_SHIFT 4
#define OMAP3430ES1_AUTO_D2D (1 << 3)
#define OMAP3430ES1_AUTO_D2D_SHIFT 3
+#define OMAP3430_AUTO_SAD2D (1 << 3)
+#define OMAP3430_AUTO_SAD2D_SHIFT 3
#define OMAP3430_AUTO_SSI (1 << 0)
#define OMAP3430_AUTO_SSI_SHIFT 0
#define OMAP3430ES2_AUTO_USBTLL (1 << 2)
#define OMAP3430ES2_AUTO_USBTLL_SHIFT 2
#define OMAP3430ES2_AUTO_USBTLL_MASK (1 << 2)
+#define OMAP3430_AUTO_MAD2D_SHIFT 3
+#define OMAP3430_AUTO_MAD2D (1 << 3)
/* CM_CLKSEL_CORE */
#define OMAP3430_CLKSEL_SSI_SHIFT 8
#include "prcm-common.h"
-#ifndef __ASSEMBLER__
-#define OMAP_CM_REGADDR(module, reg) \
- IO_ADDRESS(OMAP2_CM_BASE + (module) + (reg))
-#else
#define OMAP2420_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
#define OMAP2430_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
#define OMAP34XX_CM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
-#endif
/*
* Architecture-specific global CM registers
#define OMAP3430_CM_SYSCONFIG OMAP_CM_REGADDR(OCP_MOD, 0x0010)
#define OMAP3430_CM_POLCTRL OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3_CM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP3430_CM_CLKOUT_CTRL OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts: Juha Yrjola
+ * Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+ .name = "omap2-onenand",
+ .id = -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+ struct gpmc_timings t;
+
+ const int t_cer = 15;
+ const int t_avdp = 12;
+ const int t_aavdh = 7;
+ const int t_ce = 76;
+ const int t_aa = 76;
+ const int t_oe = 20;
+ const int t_cez = 20; /* max of t_cez, t_oez */
+ const int t_ds = 30;
+ const int t_wpl = 40;
+ const int t_wph = 30;
+
+ memset(&t, 0, sizeof(t));
+ t.sync_clk = 0;
+ t.cs_on = 0;
+ t.adv_on = 0;
+
+ /* Read */
+ t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+ t.oe_on = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+ t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+ t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+ t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+ t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+ t.cs_rd_off = t.oe_off;
+ t.rd_cycle = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+ /* Write */
+ t.adv_wr_off = t.adv_rd_off;
+ t.we_on = t.oe_on;
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = t.we_on;
+ t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+ }
+ t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+ t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+ t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+ /* Configure GPMC for asynchronous read */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_DEVICESIZE_16 |
+ GPMC_CONFIG1_MUXADDDATA);
+
+ return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+ int sync_read, int sync_write, int hf)
+{
+ u32 reg;
+
+ reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+ reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+ reg |= (latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+ ONENAND_SYS_CFG1_BL_16;
+ if (sync_read)
+ reg |= ONENAND_SYS_CFG1_SYNC_READ;
+ else
+ reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+ if (sync_write)
+ reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+ else
+ reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+ if (hf)
+ reg |= ONENAND_SYS_CFG1_HF;
+ else
+ reg &= ~ONENAND_SYS_CFG1_HF;
+ writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+ void __iomem *onenand_base,
+ int freq)
+{
+ struct gpmc_timings t;
+ const int t_cer = 15;
+ const int t_avdp = 12;
+ const int t_cez = 20; /* max of t_cez, t_oez */
+ const int t_ds = 30;
+ const int t_wpl = 40;
+ const int t_wph = 30;
+ int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+ int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+ int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+ int err, ticks_cez;
+ int cs = cfg->cs;
+ u32 reg;
+
+ if (cfg->flags & ONENAND_SYNC_READ) {
+ sync_read = 1;
+ } else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+ sync_read = 1;
+ sync_write = 1;
+ }
+
+ if (!freq) {
+ /* Very first call freq is not known */
+ err = omap2_onenand_set_async_mode(cs, onenand_base);
+ if (err)
+ return err;
+ reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+ switch ((reg >> 4) & 0xf) {
+ case 0:
+ freq = 40;
+ break;
+ case 1:
+ freq = 54;
+ break;
+ case 2:
+ freq = 66;
+ break;
+ case 3:
+ freq = 83;
+ break;
+ case 4:
+ freq = 104;
+ break;
+ default:
+ freq = 54;
+ break;
+ }
+ first_time = 1;
+ }
+
+ switch (freq) {
+ case 83:
+ min_gpmc_clk_period = 12; /* 83 MHz */
+ t_ces = 5;
+ t_avds = 4;
+ t_avdh = 2;
+ t_ach = 6;
+ t_aavdh = 6;
+ t_rdyo = 9;
+ break;
+ case 66:
+ min_gpmc_clk_period = 15; /* 66 MHz */
+ t_ces = 6;
+ t_avds = 5;
+ t_avdh = 2;
+ t_ach = 6;
+ t_aavdh = 6;
+ t_rdyo = 11;
+ break;
+ default:
+ min_gpmc_clk_period = 18; /* 54 MHz */
+ t_ces = 7;
+ t_avds = 7;
+ t_avdh = 7;
+ t_ach = 9;
+ t_aavdh = 7;
+ t_rdyo = 15;
+ sync_write = 0;
+ break;
+ }
+
+ tick_ns = gpmc_ticks_to_ns(1);
+ div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+ gpmc_clk_ns = gpmc_ticks_to_ns(div);
+ if (gpmc_clk_ns < 15) /* >66Mhz */
+ hf = 1;
+ if (hf)
+ latency = 6;
+ else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+ latency = 3;
+ else
+ latency = 4;
+
+ if (first_time)
+ set_onenand_cfg(onenand_base, latency,
+ sync_read, sync_write, hf);
+
+ if (div == 1) {
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+ reg |= (1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+ reg |= (1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+ reg |= (1 << 7);
+ reg |= (1 << 23);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+ } else {
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+ reg &= ~(1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+ reg &= ~(1 << 7);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+ reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+ reg &= ~(1 << 7);
+ reg &= ~(1 << 23);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+ }
+
+ /* Set synchronous read timings */
+ memset(&t, 0, sizeof(t));
+ t.sync_clk = min_gpmc_clk_period;
+ t.cs_on = 0;
+ t.adv_on = 0;
+ fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+ fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+ t.page_burst_access = gpmc_clk_ns;
+
+ /* Read */
+ t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+ t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+ t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+ t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+ t.cs_rd_off = t.oe_off;
+ ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+ t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+ ticks_cez);
+
+ /* Write */
+ if (sync_write) {
+ t.adv_wr_off = t.adv_rd_off;
+ t.we_on = 0;
+ t.we_off = t.cs_rd_off;
+ t.cs_wr_off = t.cs_rd_off;
+ t.wr_cycle = t.rd_cycle;
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+ gpmc_ns_to_ticks(min_gpmc_clk_period +
+ t_rdyo));
+ t.wr_access = t.access;
+ }
+ } else {
+ t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+ t_avdp, t_cer));
+ t.we_on = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+ t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+ t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+ t.wr_cycle = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+ if (cpu_is_omap34xx()) {
+ t.wr_data_mux_bus = t.we_on;
+ t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+ }
+ }
+
+ /* Configure GPMC for synchronous read */
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_WRAPBURST_SUPP |
+ GPMC_CONFIG1_READMULTIPLE_SUPP |
+ (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+ (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+ (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+ GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+ GPMC_CONFIG1_PAGE_LEN(2) |
+ (cpu_is_omap34xx() ? 0 :
+ (GPMC_CONFIG1_WAIT_READ_MON |
+ GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+ GPMC_CONFIG1_DEVICESIZE_16 |
+ GPMC_CONFIG1_DEVICETYPE_NOR |
+ GPMC_CONFIG1_MUXADDDATA);
+
+ err = gpmc_cs_set_timings(cs, &t);
+ if (err)
+ return err;
+
+ set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+ return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+ struct device *dev = &gpmc_onenand_device.dev;
+
+ /* Set sync timings in GPMC */
+ if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+ freq) < 0) {
+ dev_err(dev, "Unable to set synchronous mode\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+ gpmc_onenand_data = _onenand_data;
+ gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+ gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+ if (cpu_is_omap24xx() &&
+ (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+ printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+ gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+ gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+ }
+
+ if (platform_device_register(&gpmc_onenand_device) < 0) {
+ printk(KERN_ERR "Unable to register OneNAND device\n");
+ return;
+ }
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact: Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+ [0] = {
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+ .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+ .name = "smc91x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
+ .resource = gpmc_smc91x_resources,
+ .dev = {
+ .platform_data = &gpmc_smc91x_info,
+ },
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+ struct gpmc_timings t;
+ const int t3 = 10; /* Figure 12.2 read and 12.4 write */
+ const int t4_r = 20; /* Figure 12.2 read */
+ const int t4_w = 5; /* Figure 12.4 write */
+ const int t5 = 25; /* Figure 12.2 read */
+ const int t6 = 15; /* Figure 12.2 read */
+ const int t7 = 5; /* Figure 12.4 write */
+ const int t8 = 5; /* Figure 12.4 write */
+ const int t20 = 185; /* Figure 12.2 read and 12.4 write */
+ u32 l;
+
+ memset(&t, 0, sizeof(t));
+
+ /* Read timings */
+ t.cs_on = 0;
+ t.adv_on = t.cs_on;
+ t.oe_on = t.adv_on + t3;
+ t.access = t.oe_on + t5;
+ t.oe_off = t.access;
+ t.adv_rd_off = t.oe_off + max(t4_r, t6);
+ t.cs_rd_off = t.oe_off;
+ t.rd_cycle = t20 - t.oe_on;
+
+ /* Write timings */
+ t.we_on = t.adv_on + t3;
+
+ if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+ t.wr_data_mux_bus = t.we_on;
+ t.we_off = t.wr_data_mux_bus + t7;
+ } else
+ t.we_off = t.we_on + t7;
+ if (cpu_is_omap34xx())
+ t.wr_access = t.we_off;
+ t.adv_wr_off = t.we_off + max(t4_w, t8);
+ t.cs_wr_off = t.we_off + t4_w;
+ t.wr_cycle = t20 - t.we_on;
+
+ l = GPMC_CONFIG1_DEVICESIZE_16;
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ l |= GPMC_CONFIG1_MUXADDDATA;
+ if (gpmc_cfg->flags & GPMC_READ_MON)
+ l |= GPMC_CONFIG1_WAIT_READ_MON;
+ if (gpmc_cfg->flags & GPMC_WRITE_MON)
+ l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+ if (gpmc_cfg->wait_pin)
+ l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+ gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+ /*
+ * FIXME: Calculate the address and data bus muxed timings.
+ * Note that at least adv_rd_off needs to be changed according
+ * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+ * FPGA in between smc91x and omap as the timings are different
+ * from above?
+ */
+ if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+ return 0;
+
+ return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+ unsigned long cs_mem_base;
+ int ret;
+
+ gpmc_cfg = board_data;
+
+ if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+ gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+ if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+ printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+ return;
+ }
+
+ gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+ gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+ gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+ if (gpmc_cfg->retime) {
+ ret = gpmc_cfg->retime();
+ if (ret != 0)
+ goto free1;
+ }
+
+ if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+ goto free1;
+
+ gpio_direction_input(gpmc_cfg->gpio_irq);
+ gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+ if (gpmc_cfg->gpio_pwrdwn) {
+ ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+ if (ret)
+ goto free2;
+ gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+ }
+
+ if (gpmc_cfg->gpio_reset) {
+ ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+ if (ret)
+ goto free3;
+
+ gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+ gpio_set_value(gpmc_cfg->gpio_reset, 1);
+ msleep(100);
+ gpio_set_value(gpmc_cfg->gpio_reset, 0);
+ }
+
+ if (platform_device_register(&gpmc_smc91x_device) < 0) {
+ printk(KERN_ERR "Unable to register smc91x device\n");
+ gpio_free(gpmc_cfg->gpio_reset);
+ goto free3;
+ }
+
+ return;
+
+free3:
+ if (gpmc_cfg->gpio_pwrdwn)
+ gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+ gpio_free(gpmc_cfg->gpio_irq);
+free1:
+ gpmc_cs_free(gpmc_cfg->cs);
+
+ printk(KERN_ERR "Could not initialize smc91x\n");
+}
*
* Author: Juha Yrjola
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
} else if (cpu_is_omap34xx()) {
ck = "gpmc_fck";
l = OMAP34XX_GPMC_BASE;
+ } else if (cpu_is_omap44xx()) {
+ ck = "gpmc_fck";
+ l = OMAP44XX_GPMC_BASE;
}
gpmc_l3_clk = clk_get(NULL, ck);
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
omap24xx_check_revision();
else if (cpu_is_omap34xx())
omap34xx_check_revision();
- else
+ else if (cpu_is_omap44xx()) {
+ printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+ return;
+ } else
pr_err("OMAP revision unknown, please fix!\n");
/*
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
- * Copyright (C) 2007 Texas Instruments
+ * Copyright (C) 2007-2009 Texas Instruments
*
* Author:
* Juha Yrjola <juha.yrjola@nokia.com>
* Syed Khasim <x0khasim@ti.com>
*
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
#include <mach/sdrc.h>
#include <mach/gpmc.h>
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdev is ready */
#include "clock.h"
#include <mach/powerdomain.h>
#include <mach/clockdomain.h>
#include "clockdomains.h"
-
+#endif
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
},
};
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct map_desc omap44xx_io_desc[] __initdata = {
+ {
+ .virtual = L3_44XX_VIRT,
+ .pfn = __phys_to_pfn(L3_44XX_PHYS),
+ .length = L3_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_44XX_PHYS),
+ .length = L4_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_WK_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_WK_44XX_PHYS),
+ .length = L4_WK_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = OMAP44XX_GPMC_VIRT,
+ .pfn = __phys_to_pfn(OMAP44XX_GPMC_PHYS),
+ .length = OMAP44XX_GPMC_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_PER_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
+ .length = L4_PER_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+ {
+ .virtual = L4_EMU_44XX_VIRT,
+ .pfn = __phys_to_pfn(L4_EMU_44XX_PHYS),
+ .length = L4_EMU_44XX_SIZE,
+ .type = MT_DEVICE,
+ },
+};
+#endif
void __init omap2_map_common_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
#endif
+#if defined(CONFIG_ARCH_OMAP4)
+ iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
+#endif
/* Normally devicemaps_init() would flush caches and tlb after
* mdesc->map_io(), but we must also do it here because of the CPU
* revision check below.
void __init omap2_init_common_hw(struct omap_sdrc_params *sp)
{
omap2_mux_init();
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once the clkdev is ready */
pwrdm_init(powerdomains_omap);
clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
omap2_clk_init();
omap2_sdrc_init(sp);
+#endif
gpmc_init();
}
--- /dev/null
+/*
+ * omap iommu: omap2/3 architecture specific functions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ * Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+
+#include <mach/iommu.h>
+
+/*
+ * omap2 architecture specific register bit definitions
+ */
+#define IOMMU_ARCH_VERSION 0x00000011
+
+/* SYSCONF */
+#define MMU_SYS_IDLE_SHIFT 3
+#define MMU_SYS_IDLE_FORCE (0 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_NONE (1 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_SMART (2 << MMU_SYS_IDLE_SHIFT)
+#define MMU_SYS_IDLE_MASK (3 << MMU_SYS_IDLE_SHIFT)
+
+#define MMU_SYS_SOFTRESET (1 << 1)
+#define MMU_SYS_AUTOIDLE 1
+
+/* SYSSTATUS */
+#define MMU_SYS_RESETDONE 1
+
+/* IRQSTATUS & IRQENABLE */
+#define MMU_IRQ_MULTIHITFAULT (1 << 4)
+#define MMU_IRQ_TABLEWALKFAULT (1 << 3)
+#define MMU_IRQ_EMUMISS (1 << 2)
+#define MMU_IRQ_TRANSLATIONFAULT (1 << 1)
+#define MMU_IRQ_TLBMISS (1 << 0)
+#define MMU_IRQ_MASK \
+ (MMU_IRQ_MULTIHITFAULT | MMU_IRQ_TABLEWALKFAULT | MMU_IRQ_EMUMISS | \
+ MMU_IRQ_TRANSLATIONFAULT)
+
+/* MMU_CNTL */
+#define MMU_CNTL_SHIFT 1
+#define MMU_CNTL_MASK (7 << MMU_CNTL_SHIFT)
+#define MMU_CNTL_EML_TLB (1 << 3)
+#define MMU_CNTL_TWL_EN (1 << 2)
+#define MMU_CNTL_MMU_EN (1 << 1)
+
+#define get_cam_va_mask(pgsz) \
+ (((pgsz) == MMU_CAM_PGSZ_16M) ? 0xff000000 : \
+ ((pgsz) == MMU_CAM_PGSZ_1M) ? 0xfff00000 : \
+ ((pgsz) == MMU_CAM_PGSZ_64K) ? 0xffff0000 : \
+ ((pgsz) == MMU_CAM_PGSZ_4K) ? 0xfffff000 : 0)
+
+static int omap2_iommu_enable(struct iommu *obj)
+{
+ u32 l, pa;
+ unsigned long timeout;
+
+ if (!obj->iopgd || !IS_ALIGNED((u32)obj->iopgd, SZ_16K))
+ return -EINVAL;
+
+ pa = virt_to_phys(obj->iopgd);
+ if (!IS_ALIGNED(pa, SZ_16K))
+ return -EINVAL;
+
+ iommu_write_reg(obj, MMU_SYS_SOFTRESET, MMU_SYSCONFIG);
+
+ timeout = jiffies + msecs_to_jiffies(20);
+ do {
+ l = iommu_read_reg(obj, MMU_SYSSTATUS);
+ if (l & MMU_SYS_RESETDONE)
+ break;
+ } while (time_after(jiffies, timeout));
+
+ if (!(l & MMU_SYS_RESETDONE)) {
+ dev_err(obj->dev, "can't take mmu out of reset\n");
+ return -ENODEV;
+ }
+
+ l = iommu_read_reg(obj, MMU_REVISION);
+ dev_info(obj->dev, "%s: version %d.%d\n", obj->name,
+ (l >> 4) & 0xf, l & 0xf);
+
+ l = iommu_read_reg(obj, MMU_SYSCONFIG);
+ l &= ~MMU_SYS_IDLE_MASK;
+ l |= (MMU_SYS_IDLE_SMART | MMU_SYS_AUTOIDLE);
+ iommu_write_reg(obj, l, MMU_SYSCONFIG);
+
+ iommu_write_reg(obj, MMU_IRQ_MASK, MMU_IRQENABLE);
+ iommu_write_reg(obj, pa, MMU_TTB);
+
+ l = iommu_read_reg(obj, MMU_CNTL);
+ l &= ~MMU_CNTL_MASK;
+ l |= (MMU_CNTL_MMU_EN | MMU_CNTL_TWL_EN);
+ iommu_write_reg(obj, l, MMU_CNTL);
+
+ return 0;
+}
+
+static void omap2_iommu_disable(struct iommu *obj)
+{
+ u32 l = iommu_read_reg(obj, MMU_CNTL);
+
+ l &= ~MMU_CNTL_MASK;
+ iommu_write_reg(obj, l, MMU_CNTL);
+ iommu_write_reg(obj, MMU_SYS_IDLE_FORCE, MMU_SYSCONFIG);
+
+ dev_dbg(obj->dev, "%s is shutting down\n", obj->name);
+}
+
+static u32 omap2_iommu_fault_isr(struct iommu *obj, u32 *ra)
+{
+ int i;
+ u32 stat, da;
+ const char *err_msg[] = {
+ "tlb miss",
+ "translation fault",
+ "emulation miss",
+ "table walk fault",
+ "multi hit fault",
+ };
+
+ stat = iommu_read_reg(obj, MMU_IRQSTATUS);
+ stat &= MMU_IRQ_MASK;
+ if (!stat)
+ return 0;
+
+ da = iommu_read_reg(obj, MMU_FAULT_AD);
+ *ra = da;
+
+ dev_err(obj->dev, "%s:\tda:%08x ", __func__, da);
+
+ for (i = 0; i < ARRAY_SIZE(err_msg); i++) {
+ if (stat & (1 << i))
+ printk("%s ", err_msg[i]);
+ }
+ printk("\n");
+
+ iommu_write_reg(obj, stat, MMU_IRQSTATUS);
+ return stat;
+}
+
+static void omap2_tlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ cr->cam = iommu_read_reg(obj, MMU_READ_CAM);
+ cr->ram = iommu_read_reg(obj, MMU_READ_RAM);
+}
+
+static void omap2_tlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ iommu_write_reg(obj, cr->cam | MMU_CAM_V, MMU_CAM);
+ iommu_write_reg(obj, cr->ram, MMU_RAM);
+}
+
+static u32 omap2_cr_to_virt(struct cr_regs *cr)
+{
+ u32 page_size = cr->cam & MMU_CAM_PGSZ_MASK;
+ u32 mask = get_cam_va_mask(cr->cam & page_size);
+
+ return cr->cam & mask;
+}
+
+static struct cr_regs *omap2_alloc_cr(struct iommu *obj, struct iotlb_entry *e)
+{
+ struct cr_regs *cr;
+
+ if (e->da & ~(get_cam_va_mask(e->pgsz))) {
+ dev_err(obj->dev, "%s:\twrong alignment: %08x\n", __func__,
+ e->da);
+ return ERR_PTR(-EINVAL);
+ }
+
+ cr = kmalloc(sizeof(*cr), GFP_KERNEL);
+ if (!cr)
+ return ERR_PTR(-ENOMEM);
+
+ cr->cam = (e->da & MMU_CAM_VATAG_MASK) | e->prsvd | e->pgsz;
+ cr->ram = e->pa | e->endian | e->elsz | e->mixed;
+
+ return cr;
+}
+
+static inline int omap2_cr_valid(struct cr_regs *cr)
+{
+ return cr->cam & MMU_CAM_V;
+}
+
+static u32 omap2_get_pte_attr(struct iotlb_entry *e)
+{
+ u32 attr;
+
+ attr = e->mixed << 5;
+ attr |= e->endian;
+ attr |= e->elsz >> 3;
+ attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6);
+
+ return attr;
+}
+
+static ssize_t omap2_dump_cr(struct iommu *obj, struct cr_regs *cr, char *buf)
+{
+ char *p = buf;
+
+ /* FIXME: Need more detail analysis of cam/ram */
+ p += sprintf(p, "%08x %08x\n", cr->cam, cr->ram);
+
+ return p - buf;
+}
+
+#define pr_reg(name) \
+ p += sprintf(p, "%20s: %08x\n", \
+ __stringify(name), iommu_read_reg(obj, MMU_##name));
+
+static ssize_t omap2_iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+ char *p = buf;
+
+ pr_reg(REVISION);
+ pr_reg(SYSCONFIG);
+ pr_reg(SYSSTATUS);
+ pr_reg(IRQSTATUS);
+ pr_reg(IRQENABLE);
+ pr_reg(WALKING_ST);
+ pr_reg(CNTL);
+ pr_reg(FAULT_AD);
+ pr_reg(TTB);
+ pr_reg(LOCK);
+ pr_reg(LD_TLB);
+ pr_reg(CAM);
+ pr_reg(RAM);
+ pr_reg(GFLUSH);
+ pr_reg(FLUSH_ENTRY);
+ pr_reg(READ_CAM);
+ pr_reg(READ_RAM);
+ pr_reg(EMU_FAULT_AD);
+
+ return p - buf;
+}
+
+static void omap2_iommu_save_ctx(struct iommu *obj)
+{
+ int i;
+ u32 *p = obj->ctx;
+
+ for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+ p[i] = iommu_read_reg(obj, i * sizeof(u32));
+ dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+ }
+
+ BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_iommu_restore_ctx(struct iommu *obj)
+{
+ int i;
+ u32 *p = obj->ctx;
+
+ for (i = 0; i < (MMU_REG_SIZE / sizeof(u32)); i++) {
+ iommu_write_reg(obj, p[i], i * sizeof(u32));
+ dev_dbg(obj->dev, "%s\t[%02d] %08x\n", __func__, i, p[i]);
+ }
+
+ BUG_ON(p[0] != IOMMU_ARCH_VERSION);
+}
+
+static void omap2_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+ e->da = cr->cam & MMU_CAM_VATAG_MASK;
+ e->pa = cr->ram & MMU_RAM_PADDR_MASK;
+ e->valid = cr->cam & MMU_CAM_V;
+ e->pgsz = cr->cam & MMU_CAM_PGSZ_MASK;
+ e->endian = cr->ram & MMU_RAM_ENDIAN_MASK;
+ e->elsz = cr->ram & MMU_RAM_ELSZ_MASK;
+ e->mixed = cr->ram & MMU_RAM_MIXED;
+}
+
+static const struct iommu_functions omap2_iommu_ops = {
+ .version = IOMMU_ARCH_VERSION,
+
+ .enable = omap2_iommu_enable,
+ .disable = omap2_iommu_disable,
+ .fault_isr = omap2_iommu_fault_isr,
+
+ .tlb_read_cr = omap2_tlb_read_cr,
+ .tlb_load_cr = omap2_tlb_load_cr,
+
+ .cr_to_e = omap2_cr_to_e,
+ .cr_to_virt = omap2_cr_to_virt,
+ .alloc_cr = omap2_alloc_cr,
+ .cr_valid = omap2_cr_valid,
+ .dump_cr = omap2_dump_cr,
+
+ .get_pte_attr = omap2_get_pte_attr,
+
+ .save_ctx = omap2_iommu_save_ctx,
+ .restore_ctx = omap2_iommu_restore_ctx,
+ .dump_ctx = omap2_iommu_dump_ctx,
+};
+
+static int __init omap2_iommu_init(void)
+{
+ return install_iommu_arch(&omap2_iommu_ops);
+}
+module_init(omap2_iommu_init);
+
+static void __exit omap2_iommu_exit(void)
+{
+ uninstall_iommu_arch(&omap2_iommu_ops);
+}
+module_exit(omap2_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_DESCRIPTION("omap iommu: omap2/3 architecture specific functions");
+MODULE_LICENSE("GPL v2");
#define INTC_MIR_CLEAR0 0x0088
#define INTC_MIR_SET0 0x008c
#define INTC_PENDING_IRQ0 0x0098
-
/* Number of IRQ state bits in each MIR register */
#define IRQ_BITS_PER_REG 32
.ack = omap_mask_ack_irq,
.mask = omap_mask_irq,
.unmask = omap_unmask_irq,
- .disable = omap_mask_irq,
};
static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
}
+int omap_irq_pending(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+ struct omap_irq_bank *bank = irq_banks + i;
+ int irq;
+
+ for (irq = 0; irq < bank->nr_irqs; irq += 32)
+ if (intc_bank_read_reg(bank, INTC_PENDING_IRQ0 +
+ ((irq >> 5) << 5)))
+ return 1;
+ }
+ return 0;
+}
+
void __init omap_init_irq(void)
{
unsigned long nr_of_irqs = 0;
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
+#include <linux/mmc/host.h>
+#include <linux/regulator/consumer.h>
#include <mach/hardware.h>
#include <mach/control.h>
#include "mmc-twl4030.h"
-#if defined(CONFIG_TWL4030_CORE) && \
- (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
-#define LDO_CLR 0x00
-#define VSEL_S2_CLR 0x40
-
-#define VMMC1_DEV_GRP 0x27
-#define VMMC1_CLR 0x00
-#define VMMC1_315V 0x03
-#define VMMC1_300V 0x02
-#define VMMC1_285V 0x01
-#define VMMC1_185V 0x00
-#define VMMC1_DEDICATED 0x2A
-
-#define VMMC2_DEV_GRP 0x2B
-#define VMMC2_CLR 0x40
-#define VMMC2_315V 0x0c
-#define VMMC2_300V 0x0b
-#define VMMC2_285V 0x0a
-#define VMMC2_280V 0x09
-#define VMMC2_260V 0x08
-#define VMMC2_185V 0x06
-#define VMMC2_DEDICATED 0x2E
-
-#define VMMC_DEV_GRP_P1 0x20
+#if defined(CONFIG_REGULATOR) && \
+ (defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
static u16 control_pbias_offset;
static u16 control_devconf1_offset;
static struct twl_mmc_controller {
struct omap_mmc_platform_data *mmc;
- u8 twl_vmmc_dev_grp;
- u8 twl_mmc_dedicated;
- char name[HSMMC_NAME_LEN + 1];
-} hsmmc[OMAP34XX_NR_MMC] = {
- {
- .twl_vmmc_dev_grp = VMMC1_DEV_GRP,
- .twl_mmc_dedicated = VMMC1_DEDICATED,
- },
- {
- .twl_vmmc_dev_grp = VMMC2_DEV_GRP,
- .twl_mmc_dedicated = VMMC2_DEDICATED,
- },
-};
+ /* Vcc == configured supply
+ * Vcc_alt == optional
+ * - MMC1, supply for DAT4..DAT7
+ * - MMC2/MMC2, external level shifter voltage supply, for
+ * chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
+ */
+ struct regulator *vcc;
+ struct regulator *vcc_aux;
+ char name[HSMMC_NAME_LEN + 1];
+} hsmmc[OMAP34XX_NR_MMC];
static int twl_mmc_card_detect(int irq)
{
int ret = 0;
int i;
- ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
- if (ret)
- goto done;
- ret = gpio_direction_input(mmc->slots[0].switch_pin);
- if (ret)
- goto err;
+ /* MMC/SD/SDIO doesn't require a card detect switch */
+ if (gpio_is_valid(mmc->slots[0].switch_pin)) {
+ ret = gpio_request(mmc->slots[0].switch_pin, "mmc_cd");
+ if (ret)
+ goto done;
+ ret = gpio_direction_input(mmc->slots[0].switch_pin);
+ if (ret)
+ goto err;
+ }
+ /* require at least main regulator */
for (i = 0; i < ARRAY_SIZE(hsmmc); i++) {
if (hsmmc[i].name == mmc->slots[0].name) {
+ struct regulator *reg;
+
hsmmc[i].mmc = mmc;
+
+ reg = regulator_get(dev, "vmmc");
+ if (IS_ERR(reg)) {
+ dev_dbg(dev, "vmmc regulator missing\n");
+ /* HACK: until fixed.c regulator is usable,
+ * we don't require a main regulator
+ * for MMC2 or MMC3
+ */
+ if (i != 0)
+ break;
+ ret = PTR_ERR(reg);
+ goto err;
+ }
+ hsmmc[i].vcc = reg;
+ mmc->slots[0].ocr_mask = mmc_regulator_get_ocrmask(reg);
+
+ /* allow an aux regulator */
+ reg = regulator_get(dev, "vmmc_aux");
+ hsmmc[i].vcc_aux = IS_ERR(reg) ? NULL : reg;
+
+ /* UGLY HACK: workaround regulator framework bugs.
+ * When the bootloader leaves a supply active, it's
+ * initialized with zero usecount ... and we can't
+ * disable it without first enabling it. Until the
+ * framework is fixed, we need a workaround like this
+ * (which is safe for MMC, but not in general).
+ */
+ if (regulator_is_enabled(hsmmc[i].vcc) > 0) {
+ regulator_enable(hsmmc[i].vcc);
+ regulator_disable(hsmmc[i].vcc);
+ }
+ if (hsmmc[i].vcc_aux) {
+ if (regulator_is_enabled(reg) > 0) {
+ regulator_enable(reg);
+ regulator_disable(reg);
+ }
+ }
+
break;
}
}
#define twl_mmc_resume NULL
#endif
-/*
- * Sets the MMC voltage in twl4030
- */
-
-#define MMC1_OCR (MMC_VDD_165_195 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-#define MMC2_OCR (MMC_VDD_165_195 \
- |MMC_VDD_25_26|MMC_VDD_26_27|MMC_VDD_27_28 \
- |MMC_VDD_28_29|MMC_VDD_29_30|MMC_VDD_30_31|MMC_VDD_31_32)
-
-static int twl_mmc_set_voltage(struct twl_mmc_controller *c, int vdd)
-{
- int ret;
- u8 vmmc = 0, dev_grp_val;
-
- if (!vdd)
- goto doit;
-
- if (c->twl_vmmc_dev_grp == VMMC1_DEV_GRP) {
- /* VMMC1: max 220 mA. And for 8-bit mode,
- * VSIM: max 50 mA
- */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC1_185V;
- /* and VSIM_180V */
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC1_285V;
- /* and VSIM_280V */
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC1_300V;
- /* and VSIM_300V */
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC1_315V;
- /* error if VSIM needed */
- break;
- default:
- return -EINVAL;
- }
- } else if (c->twl_vmmc_dev_grp == VMMC2_DEV_GRP) {
- /* VMMC2: max 100 mA */
- switch (1 << vdd) {
- case MMC_VDD_165_195:
- vmmc = VMMC2_185V;
- break;
- case MMC_VDD_25_26:
- case MMC_VDD_26_27:
- vmmc = VMMC2_260V;
- break;
- case MMC_VDD_27_28:
- vmmc = VMMC2_280V;
- break;
- case MMC_VDD_28_29:
- vmmc = VMMC2_285V;
- break;
- case MMC_VDD_29_30:
- case MMC_VDD_30_31:
- vmmc = VMMC2_300V;
- break;
- case MMC_VDD_31_32:
- vmmc = VMMC2_315V;
- break;
- default:
- return -EINVAL;
- }
- } else {
- return -EINVAL;
- }
-
-doit:
- if (vdd)
- dev_grp_val = VMMC_DEV_GRP_P1; /* Power up */
- else
- dev_grp_val = LDO_CLR; /* Power down */
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- dev_grp_val, c->twl_vmmc_dev_grp);
- if (ret || !vdd)
- return ret;
-
- ret = twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
- vmmc, c->twl_mmc_dedicated);
-
- return ret;
-}
-
static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
- * card using the same TWL VMMC1 supply (hsmmc[0]); OMAP has both
+ * card with Vcc regulator (from twl4030 or whatever). OMAP has both
* 1.8V and 3.0V modes, controlled by the PBIAS register.
*
* In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
* is most naturally TWL VSIM; those pins also use PBIAS.
+ *
+ * FIXME handle VMMC1A as needed ...
*/
if (power_on) {
if (cpu_is_omap2430()) {
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
/* 100ms delay required for PBIAS configuration */
msleep(100);
reg &= ~OMAP2_PBIASLITEPWRDNZ0;
omap_ctrl_writel(reg, control_pbias_offset);
- ret = twl_mmc_set_voltage(c, 0);
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
/* 100ms delay required for PBIAS configuration */
msleep(100);
return ret;
}
-static int twl_mmc2_set_power(struct device *dev, int slot, int power_on, int vdd)
+static int twl_mmc23_set_power(struct device *dev, int slot, int power_on, int vdd)
{
- int ret;
+ int ret = 0;
struct twl_mmc_controller *c = &hsmmc[1];
struct omap_mmc_platform_data *mmc = dev->platform_data;
+ /* If we don't see a Vcc regulator, assume it's a fixed
+ * voltage always-on regulator.
+ */
+ if (!c->vcc)
+ return 0;
+
/*
- * Assume TWL VMMC2 (hsmmc[1]) is used only to power the card ... OMAP
+ * Assume Vcc regulator is used only to power the card ... OMAP
* VDDS is used to power the pins, optionally with a transceiver to
* support cards using voltages other than VDDS (1.8V nominal). When a
* transceiver is used, DAT3..7 are muxed as transceiver control pins.
+ *
+ * In some cases this regulator won't support enable/disable;
+ * e.g. it's a fixed rail for a WLAN chip.
+ *
+ * In other cases vcc_aux switches interface power. Example, for
+ * eMMC cards it represents VccQ. Sometimes transceivers or SDIO
+ * chips/cards need an interface voltage rail too.
*/
if (power_on) {
+ /* only MMC2 supports a CLKIN */
if (mmc->slots[0].internal_clock) {
u32 reg;
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
- ret = twl_mmc_set_voltage(c, vdd);
+ ret = mmc_regulator_set_ocr(c->vcc, vdd);
+ /* enable interface voltage rail, if needed */
+ if (ret == 0 && c->vcc_aux) {
+ ret = regulator_enable(c->vcc_aux);
+ if (ret < 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
+ }
} else {
- ret = twl_mmc_set_voltage(c, 0);
+ if (c->vcc_aux && (ret = regulator_is_enabled(c->vcc_aux)) > 0)
+ ret = regulator_disable(c->vcc_aux);
+ if (ret == 0)
+ ret = mmc_regulator_set_ocr(c->vcc, 0);
}
return ret;
}
-static int twl_mmc3_set_power(struct device *dev, int slot, int power_on,
- int vdd)
-{
- /*
- * Assume MMC3 has self-powered device connected, for example on-board
- * chip with external power source.
- */
- return 0;
-}
-
static struct omap_mmc_platform_data *hsmmc_data[OMAP34XX_NR_MMC] __initdata;
void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
mmc->slots[0].wires = c->wires;
mmc->slots[0].internal_clock = !c->ext_clock;
mmc->dma_mask = 0xffffffff;
+ mmc->init = twl_mmc_late_init;
- /* note: twl4030 card detect GPIOs normally switch VMMCx ... */
+ /* note: twl4030 card detect GPIOs can disable VMMCx ... */
if (gpio_is_valid(c->gpio_cd)) {
- mmc->init = twl_mmc_late_init;
mmc->cleanup = twl_mmc_cleanup;
mmc->suspend = twl_mmc_suspend;
mmc->resume = twl_mmc_resume;
} else
mmc->slots[0].gpio_wp = -EINVAL;
- /* NOTE: we assume OMAP's MMC1 and MMC2 use
- * the TWL4030's VMMC1 and VMMC2, respectively;
- * and that MMC3 device has it's own power source.
+ /* NOTE: MMC slots should have a Vcc regulator set up.
+ * This may be from a TWL4030-family chip, another
+ * controllable regulator, or a fixed supply.
+ *
+ * temporary HACK: ocr_mask instead of fixed supply
*/
+ mmc->slots[0].ocr_mask = c->ocr_mask;
switch (c->mmc) {
case 1:
+ /* on-chip level shifting via PBIAS0/PBIAS1 */
mmc->slots[0].set_power = twl_mmc1_set_power;
- mmc->slots[0].ocr_mask = MMC1_OCR;
break;
case 2:
- mmc->slots[0].set_power = twl_mmc2_set_power;
- if (c->transceiver)
- mmc->slots[0].ocr_mask = MMC2_OCR;
- else
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
- break;
+ if (c->ext_clock)
+ c->transceiver = 1;
+ if (c->transceiver && c->wires > 4)
+ c->wires = 4;
+ /* FALLTHROUGH */
case 3:
- mmc->slots[0].set_power = twl_mmc3_set_power;
- mmc->slots[0].ocr_mask = MMC_VDD_165_195;
+ /* off-chip level shifting, or none */
+ mmc->slots[0].set_power = twl_mmc23_set_power;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct device *dev; /* returned: pointer to mmc adapter */
+ int ocr_mask; /* temporary HACK */
};
-#if defined(CONFIG_TWL4030_CORE) && \
+#if defined(CONFIG_REGULATOR) && \
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE))
--- /dev/null
+/*
+ * Secondary CPU startup routine source file.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+/* Physical address needed since MMU not enabled yet on secondary core */
+#define OMAP4_AUX_CORE_BOOT1_PA 0x48281804
+
+ __INIT
+
+/*
+ * OMAP4 specific entry point for secondary CPU to jump from ROM
+ * code. This routine also provides a holding flag into which
+ * secondary core is held until we're ready for it to initialise.
+ * The primary core will update the this flag using a hardware
+ * register AuxCoreBoot1.
+ */
+ENTRY(omap_secondary_startup)
+ mrc p15, 0, r0, c0, c0, 5
+ and r0, r0, #0x0f
+hold: ldr r1, =OMAP4_AUX_CORE_BOOT1_PA @ read from AuxCoreBoot1
+ ldr r2, [r1]
+ cmp r2, r0
+ bne hold
+
+ /*
+ * we've been released from the cpu_release,secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
--- /dev/null
+/*
+ * OMAP4 SMP source file. It contains platform specific fucntions
+ * needed for the linux smp kernel.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Platform file needed for the OMAP4 SMP. This file is based on arm
+ * realview smp platform.
+ * * Copyright (c) 2002 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/jiffies.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/* Registers used for communicating startup information */
+#define OMAP4_AUXCOREBOOT_REG0 (OMAP44XX_VA_WKUPGEN_BASE + 0x800)
+#define OMAP4_AUXCOREBOOT_REG1 (OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+
+/* SCU base address */
+static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+
+/*
+ * Use SCU config register to count number of cores
+ */
+static inline unsigned int get_core_count(void)
+{
+ if (scu_base)
+ return scu_get_core_count(scu_base);
+ return 1;
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+ trace_hardirqs_off();
+
+ /*
+ * If any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+
+ gic_cpu_init(0, IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * Set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * Update the AuxCoreBoot1 with boot state for secondary core.
+ * omap_secondary_startup() routine will hold the secondary core till
+ * the AuxCoreBoot1 register is updated with cpu state
+ * A barrier is added to ensure that write buffer is drained
+ */
+ __raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+ smp_wmb();
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout))
+ ;
+
+ /*
+ * Now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+ /*
+ * Write the address of secondary startup routine into the
+ * AuxCoreBoot0 where ROM code will jump and start executing
+ * on secondary core once out of WFE
+ * A barrier is added to ensure that write buffer is drained
+ */
+ __raw_writel(virt_to_phys(omap_secondary_startup), \
+ OMAP4_AUXCOREBOOT_REG0);
+ smp_wmb();
+
+ /*
+ * Send a 'sev' to wake the secondary core from WFE.
+ */
+ set_event();
+ mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+ unsigned int i, ncores = get_core_count();
+
+ for (i = 0; i < ncores; i++)
+ set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int ncores = get_core_count();
+ unsigned int cpu = smp_processor_id();
+ int i;
+
+ /* sanity check */
+ if (ncores == 0) {
+ printk(KERN_ERR
+ "OMAP4: strange core count of 0? Default to 1\n");
+ ncores = 1;
+ }
+
+ if (ncores > NR_CPUS) {
+ printk(KERN_WARNING
+ "OMAP4: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, NR_CPUS);
+ ncores = NR_CPUS;
+ }
+ smp_store_cpu_info(cpu);
+
+ /*
+ * are we trying to boot more cores than exist?
+ */
+ if (max_cpus > ncores)
+ max_cpus = ncores;
+
+ /*
+ * Initialise the present map, which describes the set of CPUs
+ * actually populated at the present time.
+ */
+ for (i = 0; i < max_cpus; i++)
+ set_cpu_present(i, true);
+
+ if (max_cpus > 1) {
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+
+ /*
+ * Initialise the SCU and wake up the secondary core using
+ * wakeup_secondary().
+ */
+ scu_enable(scu_base);
+ wakeup_secondary();
+ }
+}
--- /dev/null
+/*
+ * omap iommu: omap3 device registration
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+
+#include <mach/iommu.h>
+
+#define OMAP3_MMU1_BASE 0x480bd400
+#define OMAP3_MMU2_BASE 0x5d000000
+#define OMAP3_MMU1_IRQ 24
+#define OMAP3_MMU2_IRQ 28
+
+
+static unsigned long iommu_base[] __initdata = {
+ OMAP3_MMU1_BASE,
+ OMAP3_MMU2_BASE,
+};
+
+static int iommu_irq[] __initdata = {
+ OMAP3_MMU1_IRQ,
+ OMAP3_MMU2_IRQ,
+};
+
+static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+ {
+ .name = "isp",
+ .nr_tlb_entries = 8,
+ .clk_name = "cam_ick",
+ },
+#if defined(CONFIG_MPU_BRIDGE_IOMMU)
+ {
+ .name = "iva2",
+ .nr_tlb_entries = 32,
+ .clk_name = "iva2_ck",
+ },
+#endif
+};
+#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+
+static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
+
+static int __init omap3_iommu_init(void)
+{
+ int i, err;
+
+ for (i = 0; i < NR_IOMMU_DEVICES; i++) {
+ struct platform_device *pdev;
+ struct resource res[2];
+
+ pdev = platform_device_alloc("omap-iommu", i);
+ if (!pdev) {
+ err = -ENOMEM;
+ goto err_out;
+ }
+
+ memset(res, 0, sizeof(res));
+ res[0].start = iommu_base[i];
+ res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
+ res[0].flags = IORESOURCE_MEM;
+ res[1].start = res[1].end = iommu_irq[i];
+ res[1].flags = IORESOURCE_IRQ;
+
+ err = platform_device_add_resources(pdev, res,
+ ARRAY_SIZE(res));
+ if (err)
+ goto err_out;
+ err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
+ sizeof(omap3_iommu_pdata[0]));
+ if (err)
+ goto err_out;
+ err = platform_device_add(pdev);
+ if (err)
+ goto err_out;
+ omap3_iommu_pdev[i] = pdev;
+ }
+ return 0;
+
+err_out:
+ while (i--)
+ platform_device_put(omap3_iommu_pdev[i]);
+ return err;
+}
+module_init(omap3_iommu_init);
+
+static void __exit omap3_iommu_exit(void)
+{
+ int i;
+
+ for (i = 0; i < NR_IOMMU_DEVICES; i++)
+ platform_device_unregister(omap3_iommu_pdev[i]);
+}
+module_exit(omap3_iommu_exit);
+
+MODULE_AUTHOR("Hiroshi DOYU");
+MODULE_DESCRIPTION("omap iommu: omap3 device registration");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * OMAP Power Management debug routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ * Jouni Hogander
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/timer.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/clock.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "cm.h"
+#include "pm.h"
+
+int omap2_pm_debug;
+
+#define DUMP_PRM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = prm_read_mod_reg(mod, reg)
+#define DUMP_CM_MOD_REG(mod, reg) \
+ regs[reg_count].name = #mod "." #reg; \
+ regs[reg_count++].val = cm_read_mod_reg(mod, reg)
+#define DUMP_PRM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_CM_REG(reg) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(reg)
+#define DUMP_INTC_REG(reg, off) \
+ regs[reg_count].name = #reg; \
+ regs[reg_count++].val = __raw_readl(IO_ADDRESS(0x480fe000 + (off)))
+
+void omap2_pm_dump(int mode, int resume, unsigned int us)
+{
+ struct reg {
+ const char *name;
+ u32 val;
+ } regs[32];
+ int reg_count = 0, i;
+ const char *s1 = NULL, *s2 = NULL;
+
+ if (!resume) {
+#if 0
+ /* MPU */
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET);
+ DUMP_CM_MOD_REG(MPU_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_PWSTST);
+ DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP);
+#endif
+#if 0
+ /* INTC */
+ DUMP_INTC_REG(INTC_MIR0, 0x0084);
+ DUMP_INTC_REG(INTC_MIR1, 0x00a4);
+ DUMP_INTC_REG(INTC_MIR2, 0x00c4);
+#endif
+#if 0
+ DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1);
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKEMUL_CTRL_OFFSET);
+ DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSRC_CTRL_OFFSET);
+ }
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1);
+ DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2);
+ DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN);
+ DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE);
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_PWSTST);
+#endif
+#if 0
+ /* DSP */
+ if (cpu_is_omap24xx()) {
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL);
+ DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, RM_RSTST);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTCTRL);
+ DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, PM_PWSTST);
+ }
+#endif
+ } else {
+ DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1);
+ if (cpu_is_omap24xx())
+ DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2);
+ DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST);
+ DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+#if 1
+ DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098);
+ DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8);
+ DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8);
+#endif
+ }
+
+ switch (mode) {
+ case 0:
+ s1 = "full";
+ s2 = "retention";
+ break;
+ case 1:
+ s1 = "MPU";
+ s2 = "retention";
+ break;
+ case 2:
+ s1 = "MPU";
+ s2 = "idle";
+ break;
+ }
+
+ if (!resume)
+#ifdef CONFIG_NO_HZ
+ printk(KERN_INFO
+ "--- Going to %s %s (next timer after %u ms)\n", s1, s2,
+ jiffies_to_msecs(get_next_timer_interrupt(jiffies) -
+ jiffies));
+#else
+ printk(KERN_INFO "--- Going to %s %s\n", s1, s2);
+#endif
+ else
+ printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n",
+ us / 1000, us % 1000);
+
+ for (i = 0; i < reg_count; i++)
+ printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
+}
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/pm.c
- *
- * OMAP2 Power Management Routines
- *
- * Copyright (C) 2006 Nokia Corporation
- * Tony Lindgren <tony@atomide.com>
- *
- * Copyright (C) 2005 Texas Instruments, Inc.
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * Based on pm.c for omap1
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/suspend.h>
-#include <linux/sched.h>
-#include <linux/proc_fs.h>
-#include <linux/interrupt.h>
-#include <linux/sysfs.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/atomic.h>
-#include <asm/mach/time.h>
-#include <asm/mach/irq.h>
-
-#include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/pm.h>
-
-static struct clk *vclk;
-static void (*omap2_sram_idle)(void);
-static void (*omap2_sram_suspend)(int dllctrl, int cpu_rev);
-static void (*saved_idle)(void);
-
-extern void __init pmdomain_init(void);
-extern void pmdomain_set_autoidle(void);
-
-static unsigned int omap24xx_sleep_save[OMAP24XX_SLEEP_SAVE_SIZE];
-
-void omap2_pm_idle(void)
-{
- local_irq_disable();
- local_fiq_disable();
- if (need_resched()) {
- local_fiq_enable();
- local_irq_enable();
- return;
- }
-
- omap2_sram_idle();
- local_fiq_enable();
- local_irq_enable();
-}
-
-static int omap2_pm_prepare(void)
-{
- /* We cannot sleep in idle until we have resumed */
- saved_idle = pm_idle;
- pm_idle = NULL;
- return 0;
-}
-
-static int omap2_pm_suspend(void)
-{
- return 0;
-}
-
-static int omap2_pm_enter(suspend_state_t state)
-{
- int ret = 0;
-
- switch (state)
- {
- case PM_SUSPEND_STANDBY:
- case PM_SUSPEND_MEM:
- ret = omap2_pm_suspend();
- break;
- default:
- ret = -EINVAL;
- }
-
- return ret;
-}
-
-static void omap2_pm_finish(void)
-{
- pm_idle = saved_idle;
-}
-
-static struct platform_suspend_ops omap_pm_ops = {
- .prepare = omap2_pm_prepare,
- .enter = omap2_pm_enter,
- .finish = omap2_pm_finish,
- .valid = suspend_valid_only_mem,
-};
-
-static int __init omap2_pm_init(void)
-{
- return 0;
-}
-
-__initcall(omap2_pm_init);
--- /dev/null
+/*
+ * OMAP2/3 Power Management Routines
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Jouni Hogander
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ARCH_ARM_MACH_OMAP2_PM_H
+#define __ARCH_ARM_MACH_OMAP2_PM_H
+
+extern int omap2_pm_init(void);
+extern int omap3_pm_init(void);
+
+#ifdef CONFIG_PM_DEBUG
+extern void omap2_pm_dump(int mode, int resume, unsigned int us);
+extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us) do {} while (0);
+#define omap2_pm_debug 0
+#endif /* CONFIG_PM_DEBUG */
+
+extern void omap24xx_idle_loop_suspend(void);
+
+extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
+extern void save_secure_ram_context(u32 *addr);
+
+extern unsigned int omap24xx_idle_loop_suspend_sz;
+extern unsigned int omap34xx_suspend_sz;
+extern unsigned int save_secure_ram_context_sz;
+extern unsigned int omap24xx_cpu_suspend_sz;
+extern unsigned int omap34xx_cpu_suspend_sz;
+
+#endif
--- /dev/null
+/*
+ * OMAP2 Power Management Routines
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Copyright (C) 2006-2008 Nokia Corporation
+ *
+ * Written by:
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Tony Lindgren
+ * Juha Yrjola
+ * Amit Kucheria <amit.kucheria@nokia.com>
+ * Igor Stoppa <igor.stoppa@nokia.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/suspend.h>
+#include <linux/sched.h>
+#include <linux/proc_fs.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/time.h>
+#include <linux/gpio.h>
+
+#include <asm/mach/time.h>
+#include <asm/mach/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/irqs.h>
+#include <mach/clock.h>
+#include <mach/sram.h>
+#include <mach/control.h>
+#include <mach/mux.h>
+#include <mach/dma.h>
+#include <mach/board.h>
+
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+#include "sdrc.h"
+#include "pm.h"
+
+#include <mach/powerdomain.h>
+#include <mach/clockdomain.h>
+
+static void (*omap2_sram_idle)(void);
+static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
+ void __iomem *sdrc_power);
+
+static struct powerdomain *mpu_pwrdm;
+static struct powerdomain *core_pwrdm;
+
+static struct clockdomain *dsp_clkdm;
+static struct clockdomain *gfx_clkdm;
+
+static struct clk *osc_ck, *emul_ck;
+
+static int omap2_fclks_active(void)
+{
+ u32 f1, f2;
+
+ f1 = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ f2 = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+
+ /* Ignore UART clocks. These are handled by UART core (serial.c) */
+ f1 &= ~(OMAP24XX_EN_UART1 | OMAP24XX_EN_UART2);
+ f2 &= ~OMAP24XX_EN_UART3;
+
+ if (f1 | f2)
+ return 1;
+ return 0;
+}
+
+static void omap2_enter_full_retention(void)
+{
+ u32 l;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* There is 1 reference hold for all children of the oscillator
+ * clock, the following will remove it. If no one else uses the
+ * oscillator itself it will be disabled if/when we enter retention
+ * mode.
+ */
+ clk_disable(osc_ck);
+
+ /* Clear old wake-up events */
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Workaround to kill USB */
+ l = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0) | OMAP24XX_USBSTANDBYCTRL;
+ omap_ctrl_writel(l, OMAP2_CONTROL_DEVCONF0);
+
+ omap2_gpio_prepare_for_retention();
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(0, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ /* One last check for pending IRQs to avoid extra latency due
+ * to sleeping unnecessarily. */
+ if (omap_irq_pending())
+ goto no_sleep;
+
+ omap_uart_prepare_idle(0);
+ omap_uart_prepare_idle(1);
+ omap_uart_prepare_idle(2);
+
+ /* Jump to SRAM suspend code */
+ omap2_sram_suspend(sdrc_read_reg(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_DLLA_CTRL),
+ OMAP_SDRC_REGADDR(SDRC_POWER));
+
+ omap_uart_resume_idle(2);
+ omap_uart_resume_idle(1);
+ omap_uart_resume_idle(0);
+
+no_sleep:
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(0, 1, tmp);
+ }
+ omap2_gpio_resume_after_retention();
+
+ clk_enable(osc_ck);
+
+ /* clear CORE wake-up events */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+
+ /* wakeup domain events - bit 1: GPT1, bit5 GPIO */
+ prm_clear_mod_reg_bits(0x4 | 0x1, WKUP_MOD, PM_WKST);
+
+ /* MPU domain wake events */
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x01)
+ prm_write_mod_reg(0x01, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+ if (l & 0x20)
+ prm_write_mod_reg(0x20, OCP_MOD,
+ OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+
+ /* Mask future PRCM-to-MPU interrupts */
+ prm_write_mod_reg(0x0, OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET);
+}
+
+static int omap2_i2c_active(void)
+{
+ u32 l;
+
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ return l & (OMAP2420_EN_I2C2 | OMAP2420_EN_I2C1);
+}
+
+static int sti_console_enabled;
+
+static int omap2_allow_mpu_retention(void)
+{
+ u32 l;
+
+ /* Check for MMC, UART2, UART1, McSPI2, McSPI1 and DSS1. */
+ l = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ if (l & (OMAP2420_EN_MMC | OMAP24XX_EN_UART2 |
+ OMAP24XX_EN_UART1 | OMAP24XX_EN_MCSPI2 |
+ OMAP24XX_EN_MCSPI1 | OMAP24XX_EN_DSS1))
+ return 0;
+ /* Check for UART3. */
+ l = cm_read_mod_reg(CORE_MOD, OMAP24XX_CM_FCLKEN2);
+ if (l & OMAP24XX_EN_UART3)
+ return 0;
+ if (sti_console_enabled)
+ return 0;
+
+ return 1;
+}
+
+static void omap2_enter_mpu_retention(void)
+{
+ int only_idle = 0;
+ struct timespec ts_preidle, ts_postidle, ts_idle;
+
+ /* Putting MPU into the WFI state while a transfer is active
+ * seems to cause the I2C block to timeout. Why? Good question. */
+ if (omap2_i2c_active())
+ return;
+
+ /* The peripherals seem not to be able to wake up the MPU when
+ * it is in retention mode. */
+ if (omap2_allow_mpu_retention()) {
+ /* REVISIT: These write to reserved bits? */
+ prm_write_mod_reg(0xffffffff, CORE_MOD, PM_WKST1);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, OMAP24XX_PM_WKST2);
+ prm_write_mod_reg(0xffffffff, WKUP_MOD, PM_WKST);
+
+ /* Try to enter MPU retention */
+ prm_write_mod_reg((0x01 << OMAP_POWERSTATE_SHIFT) |
+ OMAP_LOGICRETSTATE,
+ MPU_MOD, PM_PWSTCTRL);
+ } else {
+ /* Block MPU retention */
+
+ prm_write_mod_reg(OMAP_LOGICRETSTATE, MPU_MOD, PM_PWSTCTRL);
+ only_idle = 1;
+ }
+
+ if (omap2_pm_debug) {
+ omap2_pm_dump(only_idle ? 2 : 1, 0, 0);
+ getnstimeofday(&ts_preidle);
+ }
+
+ omap2_sram_idle();
+
+ if (omap2_pm_debug) {
+ unsigned long long tmp;
+
+ getnstimeofday(&ts_postidle);
+ ts_idle = timespec_sub(ts_postidle, ts_preidle);
+ tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC;
+ omap2_pm_dump(only_idle ? 2 : 1, 1, tmp);
+ }
+}
+
+static int omap2_can_sleep(void)
+{
+ if (omap2_fclks_active())
+ return 0;
+ if (osc_ck->usecount > 1)
+ return 0;
+ if (omap_dma_running())
+ return 0;
+
+ return 1;
+}
+
+static void omap2_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap2_can_sleep()) {
+ if (omap_irq_pending())
+ goto out;
+ omap2_enter_mpu_retention();
+ goto out;
+ }
+
+ if (omap_irq_pending())
+ goto out;
+
+ omap2_enter_full_retention();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap2_pm_prepare(void)
+{
+ /* We cannot sleep in idle until we have resumed */
+ disable_hlt();
+ return 0;
+}
+
+static int omap2_pm_suspend(void)
+{
+ u32 wken_wkup, mir1;
+
+ wken_wkup = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+ prm_write_mod_reg(wken_wkup & ~OMAP24XX_EN_GPT1, WKUP_MOD, PM_WKEN);
+
+ /* Mask GPT1 */
+ mir1 = omap_readl(0x480fe0a4);
+ omap_writel(1 << 5, 0x480fe0ac);
+
+ omap_uart_prepare_suspend();
+ omap2_enter_full_retention();
+
+ omap_writel(mir1, 0x480fe0a4);
+ prm_write_mod_reg(wken_wkup, WKUP_MOD, PM_WKEN);
+
+ return 0;
+}
+
+static int omap2_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap2_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap2_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap2_pm_prepare,
+ .enter = omap2_pm_enter,
+ .finish = omap2_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+static int _pm_clkdm_enable_hwsup(struct clockdomain *clkdm)
+{
+ omap2_clkdm_allow_idle(clkdm);
+ return 0;
+}
+
+static void __init prcm_setup_regs(void)
+{
+ int i, num_mem_banks;
+ struct powerdomain *pwrdm;
+
+ /* Enable autoidle */
+ prm_write_mod_reg(OMAP24XX_AUTOIDLE, OCP_MOD,
+ OMAP2_PRCM_SYSCONFIG_OFFSET);
+
+ /* Set all domain wakeup dependencies */
+ prm_write_mod_reg(OMAP_EN_WKUP_MASK, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP24XX_DSP_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, CORE_MOD, PM_WKDEP);
+ if (cpu_is_omap2430())
+ prm_write_mod_reg(0, OMAP2430_MDM_MOD, PM_WKDEP);
+
+ /*
+ * Set CORE powerdomain memory banks to retain their contents
+ * during RETENTION
+ */
+ num_mem_banks = pwrdm_get_mem_bank_count(core_pwrdm);
+ for (i = 0; i < num_mem_banks; i++)
+ pwrdm_set_mem_retst(core_pwrdm, i, PWRDM_POWER_RET);
+
+ /* Set CORE powerdomain's next power state to RETENTION */
+ pwrdm_set_next_pwrst(core_pwrdm, PWRDM_POWER_RET);
+
+ /*
+ * Set MPU powerdomain's next power state to RETENTION;
+ * preserve logic state during retention
+ */
+ pwrdm_set_logic_retst(mpu_pwrdm, PWRDM_POWER_RET);
+ pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_RET);
+
+ /* Force-power down DSP, GFX powerdomains */
+
+ pwrdm = clkdm_get_pwrdm(dsp_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(dsp_clkdm);
+
+ pwrdm = clkdm_get_pwrdm(gfx_clkdm);
+ pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
+ omap2_clkdm_sleep(gfx_clkdm);
+
+ /* Enable clockdomain hardware-supervised control for all clkdms */
+ clkdm_for_each(_pm_clkdm_enable_hwsup);
+
+ /* Enable clock autoidle for all domains */
+ cm_write_mod_reg(OMAP24XX_AUTO_CAM |
+ OMAP24XX_AUTO_MAILBOXES |
+ OMAP24XX_AUTO_WDT4 |
+ OMAP2420_AUTO_WDT3 |
+ OMAP24XX_AUTO_MSPRO |
+ OMAP2420_AUTO_MMC |
+ OMAP24XX_AUTO_FAC |
+ OMAP2420_AUTO_EAC |
+ OMAP24XX_AUTO_HDQ |
+ OMAP24XX_AUTO_UART2 |
+ OMAP24XX_AUTO_UART1 |
+ OMAP24XX_AUTO_I2C2 |
+ OMAP24XX_AUTO_I2C1 |
+ OMAP24XX_AUTO_MCSPI2 |
+ OMAP24XX_AUTO_MCSPI1 |
+ OMAP24XX_AUTO_MCBSP2 |
+ OMAP24XX_AUTO_MCBSP1 |
+ OMAP24XX_AUTO_GPT12 |
+ OMAP24XX_AUTO_GPT11 |
+ OMAP24XX_AUTO_GPT10 |
+ OMAP24XX_AUTO_GPT9 |
+ OMAP24XX_AUTO_GPT8 |
+ OMAP24XX_AUTO_GPT7 |
+ OMAP24XX_AUTO_GPT6 |
+ OMAP24XX_AUTO_GPT5 |
+ OMAP24XX_AUTO_GPT4 |
+ OMAP24XX_AUTO_GPT3 |
+ OMAP24XX_AUTO_GPT2 |
+ OMAP2420_AUTO_VLYNQ |
+ OMAP24XX_AUTO_DSS,
+ CORE_MOD, CM_AUTOIDLE1);
+ cm_write_mod_reg(OMAP24XX_AUTO_UART3 |
+ OMAP24XX_AUTO_SSI |
+ OMAP24XX_AUTO_USB,
+ CORE_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(OMAP24XX_AUTO_SDRC |
+ OMAP24XX_AUTO_GPMC |
+ OMAP24XX_AUTO_SDMA,
+ CORE_MOD, CM_AUTOIDLE3);
+ cm_write_mod_reg(OMAP24XX_AUTO_PKA |
+ OMAP24XX_AUTO_AES |
+ OMAP24XX_AUTO_RNG |
+ OMAP24XX_AUTO_SHA |
+ OMAP24XX_AUTO_DES,
+ CORE_MOD, OMAP24XX_CM_AUTOIDLE4);
+
+ cm_write_mod_reg(OMAP2420_AUTO_DSP_IPI, OMAP24XX_DSP_MOD, CM_AUTOIDLE);
+
+ /* Put DPLL and both APLLs into autoidle mode */
+ cm_write_mod_reg((0x03 << OMAP24XX_AUTO_DPLL_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_96M_SHIFT) |
+ (0x03 << OMAP24XX_AUTO_54M_SHIFT),
+ PLL_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(OMAP24XX_AUTO_OMAPCTRL |
+ OMAP24XX_AUTO_WDT1 |
+ OMAP24XX_AUTO_MPU_WDT |
+ OMAP24XX_AUTO_GPIOS |
+ OMAP24XX_AUTO_32KSYNC |
+ OMAP24XX_AUTO_GPT1,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ /* REVISIT: Configure number of 32 kHz clock cycles for sys_clk
+ * stabilisation */
+ prm_write_mod_reg(15 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_CLKSSETUP_OFFSET);
+
+ /* Configure automatic voltage transition */
+ prm_write_mod_reg(2 << OMAP_SETUP_TIME_SHIFT, OMAP24XX_GR_MOD,
+ OMAP2_PRCM_VOLTSETUP_OFFSET);
+ prm_write_mod_reg(OMAP24XX_AUTO_EXTVOLT |
+ (0x1 << OMAP24XX_SETOFF_LEVEL_SHIFT) |
+ OMAP24XX_MEMRETCTRL |
+ (0x1 << OMAP24XX_SETRET_LEVEL_SHIFT) |
+ (0x0 << OMAP24XX_VOLT_LEVEL_SHIFT),
+ OMAP24XX_GR_MOD, OMAP2_PRCM_VOLTCTRL_OFFSET);
+
+ /* Enable wake-up events */
+ prm_write_mod_reg(OMAP24XX_EN_GPIOS | OMAP24XX_EN_GPT1,
+ WKUP_MOD, PM_WKEN);
+}
+
+int __init omap2_pm_init(void)
+{
+ u32 l;
+
+ if (!cpu_is_omap24xx())
+ return -ENODEV;
+
+ printk(KERN_INFO "Power Management for OMAP2 initializing\n");
+ l = prm_read_mod_reg(OCP_MOD, OMAP2_PRCM_REVISION_OFFSET);
+ printk(KERN_INFO "PRCM revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
+
+ /* Look up important powerdomains, clockdomains */
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (!mpu_pwrdm)
+ pr_err("PM: mpu_pwrdm not found\n");
+
+ core_pwrdm = pwrdm_lookup("core_pwrdm");
+ if (!core_pwrdm)
+ pr_err("PM: core_pwrdm not found\n");
+
+ dsp_clkdm = clkdm_lookup("dsp_clkdm");
+ if (!dsp_clkdm)
+ pr_err("PM: mpu_clkdm not found\n");
+
+ gfx_clkdm = clkdm_lookup("gfx_clkdm");
+ if (!gfx_clkdm)
+ pr_err("PM: gfx_clkdm not found\n");
+
+
+ osc_ck = clk_get(NULL, "osc_ck");
+ if (IS_ERR(osc_ck)) {
+ printk(KERN_ERR "could not get osc_ck\n");
+ return -ENODEV;
+ }
+
+ if (cpu_is_omap242x()) {
+ emul_ck = clk_get(NULL, "emul_ck");
+ if (IS_ERR(emul_ck)) {
+ printk(KERN_ERR "could not get emul_ck\n");
+ clk_put(osc_ck);
+ return -ENODEV;
+ }
+ }
+
+ prcm_setup_regs();
+
+ /* Hack to prevent MPU retention when STI console is enabled. */
+ {
+ const struct omap_sti_console_config *sti;
+
+ sti = omap_get_config(OMAP_TAG_STI_CONSOLE,
+ struct omap_sti_console_config);
+ if (sti != NULL && sti->enable)
+ sti_console_enabled = 1;
+ }
+
+ /*
+ * We copy the assembler sleep/wakeup routines to SRAM.
+ * These routines need to be in SRAM as that's the only
+ * memory the MPU can see when it wakes up.
+ */
+ if (cpu_is_omap24xx()) {
+ omap2_sram_idle = omap_sram_push(omap24xx_idle_loop_suspend,
+ omap24xx_idle_loop_suspend_sz);
+
+ omap2_sram_suspend = omap_sram_push(omap24xx_cpu_suspend,
+ omap24xx_cpu_suspend_sz);
+ }
+
+ suspend_set_ops(&omap_pm_ops);
+ pm_idle = omap2_pm_idle;
+
+ return 0;
+}
+
+late_initcall(omap2_pm_init);
--- /dev/null
+/*
+ * OMAP3 Power Management Routines
+ *
+ * Copyright (C) 2006-2008 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Jouni Hogander
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap1
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pm.h>
+#include <linux/suspend.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/list.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include <mach/sram.h>
+#include <mach/clockdomain.h>
+#include <mach/powerdomain.h>
+#include <mach/control.h>
+#include <mach/serial.h>
+
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+
+#include "prm.h"
+#include "pm.h"
+
+struct power_state {
+ struct powerdomain *pwrdm;
+ u32 next_state;
+ u32 saved_state;
+ struct list_head node;
+};
+
+static LIST_HEAD(pwrst_list);
+
+static void (*_omap_sram_idle)(u32 *addr, int save_state);
+
+static struct powerdomain *mpu_pwrdm;
+
+/* PRCM Interrupt Handler for wakeups */
+static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
+{
+ u32 wkst, irqstatus_mpu;
+ u32 fclk, iclk;
+
+ /* WKUP */
+ wkst = prm_read_mod_reg(WKUP_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, WKUP_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, WKUP_MOD, PM_WKST);
+ while (prm_read_mod_reg(WKUP_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, WKUP_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, WKUP_MOD, CM_FCLKEN);
+ }
+
+ /* CORE */
+ wkst = prm_read_mod_reg(CORE_MOD, PM_WKST1);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+ fclk = cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN1);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_FCLKEN1);
+ prm_write_mod_reg(wkst, CORE_MOD, PM_WKST1);
+ while (prm_read_mod_reg(CORE_MOD, PM_WKST1))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN1);
+ cm_write_mod_reg(fclk, CORE_MOD, CM_FCLKEN1);
+ }
+ wkst = prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3);
+ if (wkst) {
+ iclk = cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+ fclk = cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, CM_ICLKEN3);
+ cm_set_mod_reg_bits(wkst, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ prm_write_mod_reg(wkst, CORE_MOD, OMAP3430ES2_PM_WKST3);
+ while (prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_WKST3))
+ cpu_relax();
+ cm_write_mod_reg(iclk, CORE_MOD, CM_ICLKEN3);
+ cm_write_mod_reg(fclk, CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+ }
+
+ /* PER */
+ wkst = prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430_PER_MOD, CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430_PER_MOD, PM_WKST);
+ while (prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430_PER_MOD, CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430_PER_MOD, CM_FCLKEN);
+ }
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ /* USBHOST */
+ wkst = prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKST);
+ if (wkst) {
+ iclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ fclk = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_set_mod_reg_bits(wkst, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ prm_write_mod_reg(wkst, OMAP3430ES2_USBHOST_MOD,
+ PM_WKST);
+ while (prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ PM_WKST))
+ cpu_relax();
+ cm_write_mod_reg(iclk, OMAP3430ES2_USBHOST_MOD,
+ CM_ICLKEN);
+ cm_write_mod_reg(fclk, OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ }
+ }
+
+ irqstatus_mpu = prm_read_mod_reg(OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+ prm_write_mod_reg(irqstatus_mpu, OCP_MOD,
+ OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ while (prm_read_mod_reg(OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET))
+ cpu_relax();
+
+ return IRQ_HANDLED;
+}
+
+static void omap_sram_idle(void)
+{
+ /* Variable to tell what needs to be saved and restored
+ * in omap_sram_idle*/
+ /* save_state = 0 => Nothing to save and restored */
+ /* save_state = 1 => Only L1 and logic lost */
+ /* save_state = 2 => Only L2 lost */
+ /* save_state = 3 => L1, L2 and logic lost */
+ int save_state = 0, mpu_next_state;
+
+ if (!_omap_sram_idle)
+ return;
+
+ mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
+ switch (mpu_next_state) {
+ case PWRDM_POWER_RET:
+ /* No need to save context */
+ save_state = 0;
+ break;
+ default:
+ /* Invalid state */
+ printk(KERN_ERR "Invalid mpu state in sram_idle\n");
+ return;
+ }
+ omap2_gpio_prepare_for_retention();
+ omap_uart_prepare_idle(0);
+ omap_uart_prepare_idle(1);
+ omap_uart_prepare_idle(2);
+
+ _omap_sram_idle(NULL, save_state);
+ cpu_init();
+
+ omap_uart_resume_idle(2);
+ omap_uart_resume_idle(1);
+ omap_uart_resume_idle(0);
+ omap2_gpio_resume_after_retention();
+}
+
+/*
+ * Check if functional clocks are enabled before entering
+ * sleep. This function could be behind CONFIG_PM_DEBUG
+ * when all drivers are configuring their sysconfig registers
+ * properly and using their clocks properly.
+ */
+static int omap3_fclks_active(void)
+{
+ u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
+ fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+
+ fck_core1 = cm_read_mod_reg(CORE_MOD,
+ CM_FCLKEN1);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ fck_core3 = cm_read_mod_reg(CORE_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
+ CM_FCLKEN);
+ fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
+ CM_FCLKEN);
+ } else
+ fck_sgx = cm_read_mod_reg(GFX_MOD,
+ OMAP3430ES2_CM_FCLKEN3);
+ fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
+ CM_FCLKEN);
+ fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
+ CM_FCLKEN);
+ fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
+ CM_FCLKEN);
+
+ /* Ignore UART clocks. These are handled by UART core (serial.c) */
+ fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
+ fck_per &= ~OMAP3430_EN_UART3;
+
+ if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
+ fck_cam | fck_per | fck_usbhost)
+ return 1;
+ return 0;
+}
+
+static int omap3_can_sleep(void)
+{
+ if (!omap_uart_can_sleep())
+ return 0;
+ if (omap3_fclks_active())
+ return 0;
+ return 1;
+}
+
+/* This sets pwrdm state (other than mpu & core. Currently only ON &
+ * RET are supported. Function is assuming that clkdm doesn't have
+ * hw_sup mode enabled. */
+static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+{
+ u32 cur_state;
+ int sleep_switch = 0;
+ int ret = 0;
+
+ if (pwrdm == NULL || IS_ERR(pwrdm))
+ return -EINVAL;
+
+ while (!(pwrdm->pwrsts & (1 << state))) {
+ if (state == PWRDM_POWER_OFF)
+ return ret;
+ state--;
+ }
+
+ cur_state = pwrdm_read_next_pwrst(pwrdm);
+ if (cur_state == state)
+ return ret;
+
+ if (pwrdm_read_pwrst(pwrdm) < PWRDM_POWER_ON) {
+ omap2_clkdm_wakeup(pwrdm->pwrdm_clkdms[0]);
+ sleep_switch = 1;
+ pwrdm_wait_transition(pwrdm);
+ }
+
+ ret = pwrdm_set_next_pwrst(pwrdm, state);
+ if (ret) {
+ printk(KERN_ERR "Unable to set state of powerdomain: %s\n",
+ pwrdm->name);
+ goto err;
+ }
+
+ if (sleep_switch) {
+ omap2_clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]);
+ pwrdm_wait_transition(pwrdm);
+ }
+
+err:
+ return ret;
+}
+
+static void omap3_pm_idle(void)
+{
+ local_irq_disable();
+ local_fiq_disable();
+
+ if (!omap3_can_sleep())
+ goto out;
+
+ if (omap_irq_pending())
+ goto out;
+
+ omap_sram_idle();
+
+out:
+ local_fiq_enable();
+ local_irq_enable();
+}
+
+static int omap3_pm_prepare(void)
+{
+ disable_hlt();
+ return 0;
+}
+
+static int omap3_pm_suspend(void)
+{
+ struct power_state *pwrst;
+ int state, ret = 0;
+
+ /* Read current next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node)
+ pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
+ /* Set ones wanted by suspend */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ if (set_pwrdm_state(pwrst->pwrdm, pwrst->next_state))
+ goto restore;
+ if (pwrdm_clear_all_prev_pwrst(pwrst->pwrdm))
+ goto restore;
+ }
+
+ omap_uart_prepare_suspend();
+ omap_sram_idle();
+
+restore:
+ /* Restore next_pwrsts */
+ list_for_each_entry(pwrst, &pwrst_list, node) {
+ set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
+ state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
+ if (state > pwrst->next_state) {
+ printk(KERN_INFO "Powerdomain (%s) didn't enter "
+ "target state %d\n",
+ pwrst->pwrdm->name, pwrst->next_state);
+ ret = -1;
+ }
+ }
+ if (ret)
+ printk(KERN_ERR "Could not enter target state in pm_suspend\n");
+ else
+ printk(KERN_INFO "Successfully put all powerdomains "
+ "to target state\n");
+
+ return ret;
+}
+
+static int omap3_pm_enter(suspend_state_t state)
+{
+ int ret = 0;
+
+ switch (state) {
+ case PM_SUSPEND_STANDBY:
+ case PM_SUSPEND_MEM:
+ ret = omap3_pm_suspend();
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void omap3_pm_finish(void)
+{
+ enable_hlt();
+}
+
+static struct platform_suspend_ops omap_pm_ops = {
+ .prepare = omap3_pm_prepare,
+ .enter = omap3_pm_enter,
+ .finish = omap3_pm_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+
+/**
+ * omap3_iva_idle(): ensure IVA is in idle so it can be put into
+ * retention
+ *
+ * In cases where IVA2 is activated by bootcode, it may prevent
+ * full-chip retention or off-mode because it is not idle. This
+ * function forces the IVA2 into idle state so it can go
+ * into retention/off and thus allow full-chip retention/off.
+ *
+ **/
+static void __init omap3_iva_idle(void)
+{
+ /* ensure IVA2 clock is disabled */
+ cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* if no clock activity, nothing else to do */
+ if (!(cm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSTST) &
+ OMAP3430_CLKACTIVITY_IVA2_MASK))
+ return;
+
+ /* Reset IVA2 */
+ prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+ OMAP3430_RST2_IVA2 |
+ OMAP3430_RST3_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+ /* Enable IVA2 clock */
+ cm_write_mod_reg(OMAP3430_CM_FCLKEN_IVA2_EN_IVA2,
+ OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Set IVA2 boot mode to 'idle' */
+ omap_ctrl_writel(OMAP3_IVA2_BOOTMOD_IDLE,
+ OMAP343X_CONTROL_IVA2_BOOTMOD);
+
+ /* Un-reset IVA2 */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, RM_RSTCTRL);
+
+ /* Disable IVA2 clock */
+ cm_write_mod_reg(0, OMAP3430_IVA2_MOD, CM_FCLKEN);
+
+ /* Reset IVA2 */
+ prm_write_mod_reg(OMAP3430_RST1_IVA2 |
+ OMAP3430_RST2_IVA2 |
+ OMAP3430_RST3_IVA2,
+ OMAP3430_IVA2_MOD, RM_RSTCTRL);
+}
+
+static void __init omap3_d2d_idle(void)
+{
+ u16 mask, padconf;
+
+ /* In a stand alone OMAP3430 where there is not a stacked
+ * modem for the D2D Idle Ack and D2D MStandby must be pulled
+ * high. S CONTROL_PADCONF_SAD2D_IDLEACK and
+ * CONTROL_PADCONF_SAD2D_MSTDBY to have a pull up. */
+ mask = (1 << 4) | (1 << 3); /* pull-up, enabled */
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_MSTANDBY);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_MSTANDBY);
+
+ padconf = omap_ctrl_readw(OMAP3_PADCONF_SAD2D_IDLEACK);
+ padconf |= mask;
+ omap_ctrl_writew(padconf, OMAP3_PADCONF_SAD2D_IDLEACK);
+
+ /* reset modem */
+ prm_write_mod_reg(OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RSTPWRON |
+ OMAP3430_RM_RSTCTRL_CORE_MODEM_SW_RST,
+ CORE_MOD, RM_RSTCTRL);
+ prm_write_mod_reg(0, CORE_MOD, RM_RSTCTRL);
+}
+
+static void __init prcm_setup_regs(void)
+{
+ /* XXX Reset all wkdeps. This should be done when initializing
+ * powerdomains */
+ prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
+ prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+ } else
+ prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);
+
+ /*
+ * Enable interface clock autoidle for all modules.
+ * Note that in the long run this should be done by clockfw
+ */
+ cm_write_mod_reg(
+ OMAP3430_AUTO_MODEM |
+ OMAP3430ES2_AUTO_MMC3 |
+ OMAP3430ES2_AUTO_ICR |
+ OMAP3430_AUTO_AES2 |
+ OMAP3430_AUTO_SHA12 |
+ OMAP3430_AUTO_DES2 |
+ OMAP3430_AUTO_MMC2 |
+ OMAP3430_AUTO_MMC1 |
+ OMAP3430_AUTO_MSPRO |
+ OMAP3430_AUTO_HDQ |
+ OMAP3430_AUTO_MCSPI4 |
+ OMAP3430_AUTO_MCSPI3 |
+ OMAP3430_AUTO_MCSPI2 |
+ OMAP3430_AUTO_MCSPI1 |
+ OMAP3430_AUTO_I2C3 |
+ OMAP3430_AUTO_I2C2 |
+ OMAP3430_AUTO_I2C1 |
+ OMAP3430_AUTO_UART2 |
+ OMAP3430_AUTO_UART1 |
+ OMAP3430_AUTO_GPT11 |
+ OMAP3430_AUTO_GPT10 |
+ OMAP3430_AUTO_MCBSP5 |
+ OMAP3430_AUTO_MCBSP1 |
+ OMAP3430ES1_AUTO_FAC | /* This is es1 only */
+ OMAP3430_AUTO_MAILBOXES |
+ OMAP3430_AUTO_OMAPCTRL |
+ OMAP3430ES1_AUTO_FSHOSTUSB |
+ OMAP3430_AUTO_HSOTGUSB |
+ OMAP3430_AUTO_SAD2D |
+ OMAP3430_AUTO_SSI,
+ CORE_MOD, CM_AUTOIDLE1);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_PKA |
+ OMAP3430_AUTO_AES1 |
+ OMAP3430_AUTO_RNG |
+ OMAP3430_AUTO_SHA11 |
+ OMAP3430_AUTO_DES1,
+ CORE_MOD, CM_AUTOIDLE2);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430_AUTO_MAD2D |
+ OMAP3430ES2_AUTO_USBTLL,
+ CORE_MOD, CM_AUTOIDLE3);
+ }
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_WDT2 |
+ OMAP3430_AUTO_WDT1 |
+ OMAP3430_AUTO_GPIO1 |
+ OMAP3430_AUTO_32KSYNC |
+ OMAP3430_AUTO_GPT12 |
+ OMAP3430_AUTO_GPT1 ,
+ WKUP_MOD, CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_DSS,
+ OMAP3430_DSS_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_CAM,
+ OMAP3430_CAM_MOD,
+ CM_AUTOIDLE);
+
+ cm_write_mod_reg(
+ OMAP3430_AUTO_GPIO6 |
+ OMAP3430_AUTO_GPIO5 |
+ OMAP3430_AUTO_GPIO4 |
+ OMAP3430_AUTO_GPIO3 |
+ OMAP3430_AUTO_GPIO2 |
+ OMAP3430_AUTO_WDT3 |
+ OMAP3430_AUTO_UART3 |
+ OMAP3430_AUTO_GPT9 |
+ OMAP3430_AUTO_GPT8 |
+ OMAP3430_AUTO_GPT7 |
+ OMAP3430_AUTO_GPT6 |
+ OMAP3430_AUTO_GPT5 |
+ OMAP3430_AUTO_GPT4 |
+ OMAP3430_AUTO_GPT3 |
+ OMAP3430_AUTO_GPT2 |
+ OMAP3430_AUTO_MCBSP4 |
+ OMAP3430_AUTO_MCBSP3 |
+ OMAP3430_AUTO_MCBSP2,
+ OMAP3430_PER_MOD,
+ CM_AUTOIDLE);
+
+ if (omap_rev() > OMAP3430_REV_ES1_0) {
+ cm_write_mod_reg(
+ OMAP3430ES2_AUTO_USBHOST,
+ OMAP3430ES2_USBHOST_MOD,
+ CM_AUTOIDLE);
+ }
+
+ /*
+ * Set all plls to autoidle. This is needed until autoidle is
+ * enabled by clockfw
+ */
+ cm_write_mod_reg(1 << OMAP3430_AUTO_IVA2_DPLL_SHIFT,
+ OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+ cm_write_mod_reg(1 << OMAP3430_AUTO_MPU_DPLL_SHIFT,
+ MPU_MOD,
+ CM_AUTOIDLE2);
+ cm_write_mod_reg((1 << OMAP3430_AUTO_PERIPH_DPLL_SHIFT) |
+ (1 << OMAP3430_AUTO_CORE_DPLL_SHIFT),
+ PLL_MOD,
+ CM_AUTOIDLE);
+ cm_write_mod_reg(1 << OMAP3430ES2_AUTO_PERIPH2_DPLL_SHIFT,
+ PLL_MOD,
+ CM_AUTOIDLE2);
+
+ /*
+ * Enable control of expternal oscillator through
+ * sys_clkreq. In the long run clock framework should
+ * take care of this.
+ */
+ prm_rmw_mod_reg_bits(OMAP_AUTOEXTCLKMODE_MASK,
+ 1 << OMAP_AUTOEXTCLKMODE_SHIFT,
+ OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+
+ /* setup wakup source */
+ prm_write_mod_reg(OMAP3430_EN_IO | OMAP3430_EN_GPIO1 |
+ OMAP3430_EN_GPT1 | OMAP3430_EN_GPT12,
+ WKUP_MOD, PM_WKEN);
+ /* No need to write EN_IO, that is always enabled */
+ prm_write_mod_reg(OMAP3430_EN_GPIO1 | OMAP3430_EN_GPT1 |
+ OMAP3430_EN_GPT12,
+ WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+ /* For some reason IO doesn't generate wakeup event even if
+ * it is selected to mpu wakeup goup */
+ prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
+ OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
+
+ /* Don't attach IVA interrupts */
+ prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+ prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+ prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+ /* Clear any pending 'reset' flags */
+ prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+ prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+ /* Clear any pending PRCM interrupts */
+ prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
+ omap3_iva_idle();
+ omap3_d2d_idle();
+}
+
+static int __init pwrdms_setup(struct powerdomain *pwrdm)
+{
+ struct power_state *pwrst;
+
+ if (!pwrdm->pwrsts)
+ return 0;
+
+ pwrst = kmalloc(sizeof(struct power_state), GFP_KERNEL);
+ if (!pwrst)
+ return -ENOMEM;
+ pwrst->pwrdm = pwrdm;
+ pwrst->next_state = PWRDM_POWER_RET;
+ list_add(&pwrst->node, &pwrst_list);
+
+ if (pwrdm_has_hdwr_sar(pwrdm))
+ pwrdm_enable_hdwr_sar(pwrdm);
+
+ return set_pwrdm_state(pwrst->pwrdm, pwrst->next_state);
+}
+
+/*
+ * Enable hw supervised mode for all clockdomains if it's
+ * supported. Initiate sleep transition for other clockdomains, if
+ * they are not used
+ */
+static int __init clkdms_setup(struct clockdomain *clkdm)
+{
+ if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
+ omap2_clkdm_allow_idle(clkdm);
+ else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
+ atomic_read(&clkdm->usecount) == 0)
+ omap2_clkdm_sleep(clkdm);
+ return 0;
+}
+
+int __init omap3_pm_init(void)
+{
+ struct power_state *pwrst, *tmp;
+ int ret;
+
+ if (!cpu_is_omap34xx())
+ return -ENODEV;
+
+ printk(KERN_ERR "Power Management for TI OMAP3.\n");
+
+ /* XXX prcm_setup_regs needs to be before enabling hw
+ * supervised mode for powerdomains */
+ prcm_setup_regs();
+
+ ret = request_irq(INT_34XX_PRCM_MPU_IRQ,
+ (irq_handler_t)prcm_interrupt_handler,
+ IRQF_DISABLED, "prcm", NULL);
+ if (ret) {
+ printk(KERN_ERR "request_irq failed to register for 0x%x\n",
+ INT_34XX_PRCM_MPU_IRQ);
+ goto err1;
+ }
+
+ ret = pwrdm_for_each(pwrdms_setup);
+ if (ret) {
+ printk(KERN_ERR "Failed to setup powerdomains\n");
+ goto err2;
+ }
+
+ (void) clkdm_for_each(clkdms_setup);
+
+ mpu_pwrdm = pwrdm_lookup("mpu_pwrdm");
+ if (mpu_pwrdm == NULL) {
+ printk(KERN_ERR "Failed to get mpu_pwrdm\n");
+ goto err2;
+ }
+
+ _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+ omap34xx_cpu_suspend_sz);
+
+ suspend_set_ops(&omap_pm_ops);
+
+ pm_idle = omap3_pm_idle;
+
+err1:
+ return ret;
+err2:
+ free_irq(INT_34XX_PRCM_MPU_IRQ, NULL);
+ list_for_each_entry_safe(pwrst, tmp, &pwrst_list, node) {
+ list_del(&pwrst->node);
+ kfree(pwrst);
+ }
+ return ret;
+}
+
+late_initcall(omap3_pm_init);
/* CM_FCLKEN_WKUP, CM_ICLKEN_WKUP, PM_WKEN_WKUP shared bits */
#define OMAP3430_EN_GPIO1 (1 << 3)
#define OMAP3430_EN_GPIO1_SHIFT 3
+#define OMAP3430_EN_GPT12 (1 << 1)
+#define OMAP3430_EN_GPT12_SHIFT 1
#define OMAP3430_EN_GPT1 (1 << 0)
#define OMAP3430_EN_GPT1_SHIFT 0
#include "prcm-common.h"
-#ifndef __ASSEMBLER__
-#define OMAP_PRM_REGADDR(module, reg) \
- IO_ADDRESS(OMAP2_PRM_BASE + (module) + (reg))
-#else
#define OMAP2420_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
#define OMAP34XX_PRM_REGADDR(module, reg) \
IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
-#endif
/*
* Architecture-specific global PRM registers
*
*/
-/* Global 24xx registers in GR_MOD (Same as OCP_MOD for 24xx) */
-#define OMAP24XX_PRCM_VOLTCTRL_OFFSET 0x0050
-#define OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET 0x0080
-
-/* 242x GR_MOD registers, use these only for assembly code */
-#define OMAP242X_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP242X_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* 243x GR_MOD registers, use these only for assembly code */
-#define OMAP243X_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_VOLTCTRL_OFFSET)
-#define OMAP243X_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OMAP24XX_GR_MOD, \
- OMAP24XX_PRCM_CLKCFG_CTRL_OFFSET)
-
-/* These will disappear */
-#define OMAP24XX_PRCM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP24XX_PRCM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0010)
-
-#define OMAP24XX_PRCM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP24XX_PRCM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-#define OMAP24XX_PRCM_VOLTST OMAP_PRM_REGADDR(OCP_MOD, 0x0054)
-#define OMAP24XX_PRCM_CLKSRC_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0060)
-#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0070)
-#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0078)
-#define OMAP24XX_PRCM_CLKCFG_CTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0080)
-#define OMAP24XX_PRCM_CLKCFG_STATUS OMAP_PRM_REGADDR(OCP_MOD, 0x0084)
-#define OMAP24XX_PRCM_VOLTSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0090)
-#define OMAP24XX_PRCM_CLKSSETUP OMAP_PRM_REGADDR(OCP_MOD, 0x0094)
-#define OMAP24XX_PRCM_POLCTRL OMAP_PRM_REGADDR(OCP_MOD, 0x0098)
-
-#define OMAP3430_PRM_REVISION OMAP_PRM_REGADDR(OCP_MOD, 0x0004)
-#define OMAP3430_PRM_SYSCONFIG OMAP_PRM_REGADDR(OCP_MOD, 0x0014)
-
-#define OMAP3430_PRM_IRQSTATUS_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x0018)
-#define OMAP3430_PRM_IRQENABLE_MPU OMAP_PRM_REGADDR(OCP_MOD, 0x001c)
-
-
-#define OMAP3430_PRM_VC_SMPS_SA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
-#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
-#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
-#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
-#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
-#define OMAP3430_PRM_VC_CH_CONF OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
-#define OMAP3430_PRM_VC_I2C_CFG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
-#define OMAP3430_PRM_VC_BYPASS_VAL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
-#define OMAP3430_PRM_RSTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
-#define OMAP3430_PRM_RSTTIME OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
-#define OMAP3430_PRM_RSTST OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
-#define OMAP3430_PRM_VOLTCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
-#define OMAP3430_PRM_SRAM_PCHARGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
-#define OMAP3430_PRM_CLKSRC_CTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
-#define OMAP3430_PRM_VOLTSETUP1 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
-#define OMAP3430_PRM_VOLTOFFSET OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
-#define OMAP3430_PRM_CLKSETUP OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
-#define OMAP3430_PRM_POLCTRL OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
-#define OMAP3430_PRM_VOLTSETUP2 OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
-#define OMAP3430_PRM_VP1_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
-#define OMAP3430_PRM_VP1_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
-#define OMAP3430_PRM_VP1_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
-#define OMAP3430_PRM_VP1_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
-#define OMAP3430_PRM_VP1_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
-#define OMAP3430_PRM_VP1_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
-#define OMAP3430_PRM_VP2_CONFIG OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
-#define OMAP3430_PRM_VP2_VSTEPMIN OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
-#define OMAP3430_PRM_VP2_VSTEPMAX OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
-#define OMAP3430_PRM_VP2_VLIMITTO OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
-#define OMAP3430_PRM_VP2_VOLTAGE OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
-#define OMAP3430_PRM_VP2_STATUS OMAP_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
-
-#define OMAP3430_PRM_CLKSEL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
-#define OMAP3430_PRM_CLKOUT_CTRL OMAP_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
+#define OMAP2_PRCM_REVISION_OFFSET 0x0000
+#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
+#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
+#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
+#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
+#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
+#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
+#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
+#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
+#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
+#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
+#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
+
+#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
+
+#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
+#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
+#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
+#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
+#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
+#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
+#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
+#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
+#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
+#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
+
+#define OMAP3_PRM_REVISION_OFFSET 0x0004
+#define OMAP3430_PRM_REVISION OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0004)
+#define OMAP3_PRM_SYSCONFIG_OFFSET 0x0014
+#define OMAP3430_PRM_SYSCONFIG OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0014)
+
+#define OMAP3_PRM_IRQSTATUS_MPU_OFFSET 0x0018
+#define OMAP3430_PRM_IRQSTATUS_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x0018)
+#define OMAP3_PRM_IRQENABLE_MPU_OFFSET 0x001c
+#define OMAP3430_PRM_IRQENABLE_MPU OMAP34XX_PRM_REGADDR(OCP_MOD, 0x001c)
+
+
+#define OMAP3_PRM_VC_SMPS_SA_OFFSET 0x0020
+#define OMAP3430_PRM_VC_SMPS_SA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0020)
+#define OMAP3_PRM_VC_SMPS_VOL_RA_OFFSET 0x0024
+#define OMAP3430_PRM_VC_SMPS_VOL_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0024)
+#define OMAP3_PRM_VC_SMPS_CMD_RA_OFFSET 0x0028
+#define OMAP3430_PRM_VC_SMPS_CMD_RA OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0028)
+#define OMAP3_PRM_VC_CMD_VAL_0_OFFSET 0x002c
+#define OMAP3430_PRM_VC_CMD_VAL_0 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x002c)
+#define OMAP3_PRM_VC_CMD_VAL_1_OFFSET 0x0030
+#define OMAP3430_PRM_VC_CMD_VAL_1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0030)
+#define OMAP3_PRM_VC_CH_CONF_OFFSET 0x0034
+#define OMAP3430_PRM_VC_CH_CONF OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0034)
+#define OMAP3_PRM_VC_I2C_CFG_OFFSET 0x0038
+#define OMAP3430_PRM_VC_I2C_CFG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0038)
+#define OMAP3_PRM_VC_BYPASS_VAL_OFFSET 0x003c
+#define OMAP3430_PRM_VC_BYPASS_VAL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x003c)
+#define OMAP3_PRM_RSTCTRL_OFFSET 0x0050
+#define OMAP3430_PRM_RSTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0050)
+#define OMAP3_PRM_RSTTIME_OFFSET 0x0054
+#define OMAP3430_PRM_RSTTIME OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0054)
+#define OMAP3_PRM_RSTST_OFFSET 0x0058
+#define OMAP3430_PRM_RSTST OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0058)
+#define OMAP3_PRM_VOLTCTRL_OFFSET 0x0060
+#define OMAP3430_PRM_VOLTCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0060)
+#define OMAP3_PRM_SRAM_PCHARGE_OFFSET 0x0064
+#define OMAP3430_PRM_SRAM_PCHARGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0064)
+#define OMAP3_PRM_CLKSRC_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKSRC_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0070)
+#define OMAP3_PRM_VOLTSETUP1_OFFSET 0x0090
+#define OMAP3430_PRM_VOLTSETUP1 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0090)
+#define OMAP3_PRM_VOLTOFFSET_OFFSET 0x0094
+#define OMAP3430_PRM_VOLTOFFSET OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0094)
+#define OMAP3_PRM_CLKSETUP_OFFSET 0x0098
+#define OMAP3430_PRM_CLKSETUP OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x0098)
+#define OMAP3_PRM_POLCTRL_OFFSET 0x009c
+#define OMAP3430_PRM_POLCTRL OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x009c)
+#define OMAP3_PRM_VOLTSETUP2_OFFSET 0x00a0
+#define OMAP3430_PRM_VOLTSETUP2 OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00a0)
+#define OMAP3_PRM_VP1_CONFIG_OFFSET 0x00b0
+#define OMAP3430_PRM_VP1_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b0)
+#define OMAP3_PRM_VP1_VSTEPMIN_OFFSET 0x00b4
+#define OMAP3430_PRM_VP1_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b4)
+#define OMAP3_PRM_VP1_VSTEPMAX_OFFSET 0x00b8
+#define OMAP3430_PRM_VP1_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00b8)
+#define OMAP3_PRM_VP1_VLIMITTO_OFFSET 0x00bc
+#define OMAP3430_PRM_VP1_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00bc)
+#define OMAP3_PRM_VP1_VOLTAGE_OFFSET 0x00c0
+#define OMAP3430_PRM_VP1_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c0)
+#define OMAP3_PRM_VP1_STATUS_OFFSET 0x00c4
+#define OMAP3430_PRM_VP1_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00c4)
+#define OMAP3_PRM_VP2_CONFIG_OFFSET 0x00d0
+#define OMAP3430_PRM_VP2_CONFIG OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d0)
+#define OMAP3_PRM_VP2_VSTEPMIN_OFFSET 0x00d4
+#define OMAP3430_PRM_VP2_VSTEPMIN OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d4)
+#define OMAP3_PRM_VP2_VSTEPMAX_OFFSET 0x00d8
+#define OMAP3430_PRM_VP2_VSTEPMAX OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00d8)
+#define OMAP3_PRM_VP2_VLIMITTO_OFFSET 0x00dc
+#define OMAP3430_PRM_VP2_VLIMITTO OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00dc)
+#define OMAP3_PRM_VP2_VOLTAGE_OFFSET 0x00e0
+#define OMAP3430_PRM_VP2_VOLTAGE OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e0)
+#define OMAP3_PRM_VP2_STATUS_OFFSET 0x00e4
+#define OMAP3430_PRM_VP2_STATUS OMAP34XX_PRM_REGADDR(OMAP3430_GR_MOD, 0x00e4)
+
+#define OMAP3_PRM_CLKSEL_OFFSET 0x0040
+#define OMAP3430_PRM_CLKSEL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0040)
+#define OMAP3_PRM_CLKOUT_CTRL_OFFSET 0x0070
+#define OMAP3430_PRM_CLKOUT_CTRL OMAP34XX_PRM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
/*
* Module specific PRM registers from PRM_BASE + domain offset
#define OMAP3430_PM_MPUGRPSEL 0x00a4
#define OMAP3430_PM_MPUGRPSEL1 OMAP3430_PM_MPUGRPSEL
+#define OMAP3430ES2_PM_MPUGRPSEL3 0x00f8
#define OMAP3430_PM_IVAGRPSEL 0x00a8
#define OMAP3430_PM_IVAGRPSEL1 OMAP3430_PM_IVAGRPSEL
+#define OMAP3430ES2_PM_IVAGRPSEL3 0x00f4
#define OMAP3430_PM_PREPWSTST 0x00e8
--- /dev/null
+/*
+ * SDRC register values for the Micron MT46H32M32LF-6
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+#define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
+
+#include <mach/sdrc.h>
+
+/* Micron MT46H32M32LF-6 */
+/* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
+static struct omap_sdrc_params mt46h32m32lf6_sdrc_params[] = {
+ [0] = {
+ .rate = 166000000,
+ .actim_ctrla = 0x9a9db4c6,
+ .actim_ctrlb = 0x00011217,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 165941176,
+ .actim_ctrla = 0x9a9db4c6,
+ .actim_ctrlb = 0x00011217,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x51512283,
+ .actim_ctrlb = 0x0001120c,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [3] = {
+ .rate = 82970588,
+ .actim_ctrla = 0x51512283,
+ .actim_ctrlb = 0x0001120c,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000032,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
--- /dev/null
+/*
+ * SDRC register values for the Qimonda HYB18M512160AF-6
+ *
+ * Copyright (C) 2008-2009 Texas Instruments, Inc.
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+#define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
+
+#include <mach/sdrc.h>
+
+/* Qimonda HYB18M512160AF-6 */
+static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
+ [0] = {
+ .rate = 166000000,
+ .actim_ctrla = 0x629db4c6,
+ .actim_ctrlb = 0x00012214,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [1] = {
+ .rate = 165941176,
+ .actim_ctrla = 0x629db4c6,
+ .actim_ctrlb = 0x00012214,
+ .rfr_ctrl = 0x0004dc01,
+ .mr = 0x00000032,
+ },
+ [2] = {
+ .rate = 83000000,
+ .actim_ctrla = 0x31512283,
+ .actim_ctrlb = 0x0001220a,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000022,
+ },
+ [3] = {
+ .rate = 82970588,
+ .actim_ctrla = 0x31512283,
+ .actim_ctrlb = 0x0001220a,
+ .rfr_ctrl = 0x00025501,
+ .mr = 0x00000022,
+ },
+ [4] = {
+ .rate = 0
+ },
+};
+
+#endif
void __iomem *omap2_sdrc_base;
void __iomem *omap2_sms_base;
+/* SDRC_POWER register bits */
+#define SDRC_POWER_EXTCLKDIS_SHIFT 3
+#define SDRC_POWER_PWDENA_SHIFT 2
+#define SDRC_POWER_PAGEPOLICY_SHIFT 0
/**
* omap2_sdrc_get_params - return SDRC register values for a given clock rate
{
struct omap_sdrc_params *sp;
+ if (!sdrc_init_params)
+ return NULL;
+
sp = sdrc_init_params;
- while (sp->rate != r)
+ while (sp->rate && sp->rate != r)
sp++;
if (!sp->rate)
omap2_sms_base = omap2_globals->sms;
}
-/* turn on smart idle modes for SDRAM scheduler and controller */
+/**
+ * omap2_sdrc_init - initialize SMS, SDRC devices on boot
+ * @sp: pointer to a null-terminated list of struct omap_sdrc_params
+ *
+ * Turn on smart idle modes for SDRAM scheduler and controller.
+ * Program a known-good configuration for the SDRC to deal with buggy
+ * bootloaders.
+ */
void __init omap2_sdrc_init(struct omap_sdrc_params *sp)
{
u32 l;
sdrc_write_reg(l, SDRC_SYSCONFIG);
sdrc_init_params = sp;
+
+ /* XXX Enable SRFRONIDLEREQ here also? */
+ l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
+ (1 << SDRC_POWER_PWDENA_SHIFT) |
+ (1 << SDRC_POWER_PAGEPOLICY_SHIFT);
+ sdrc_write_reg(l, SDRC_POWER);
}
m_type = omap2xxx_sdrc_get_type();
local_irq_save(flags);
- __raw_writel(0xffff, OMAP24XX_PRCM_VOLTSETUP);
+ if (cpu_is_omap2420())
+ __raw_writel(0xffff, OMAP2420_PRCM_VOLTSETUP);
+ else
+ __raw_writel(0xffff, OMAP2430_PRCM_VOLTSETUP);
omap2_sram_reprogram_sdrc(level, dll_ctrl, m_type);
curr_perf_level = level;
local_irq_restore(flags);
* Copyright (C) 2005-2008 Nokia Corporation
* Author: Paul Mundt <paul.mundt@nokia.com>
*
+ * Major rework for PM support by Kevin Hilman
+ *
* Based off of arch/arm/mach-omap/omap1/serial.c
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com
+ *
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
#include <mach/common.h>
#include <mach/board.h>
+#include <mach/clock.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "pm.h"
+#include "prm-regbits-34xx.h"
+
+#define UART_OMAP_WER 0x17 /* Wake-up enable register */
+
+#define DEFAULT_TIMEOUT (5 * HZ)
-static struct clk *uart_ick[OMAP_MAX_NR_PORTS];
-static struct clk *uart_fck[OMAP_MAX_NR_PORTS];
+struct omap_uart_state {
+ int num;
+ int can_sleep;
+ struct timer_list timer;
+ u32 timeout;
+
+ void __iomem *wk_st;
+ void __iomem *wk_en;
+ u32 wk_mask;
+ u32 padconf;
+
+ struct clk *ick;
+ struct clk *fck;
+ int clocked;
+
+ struct plat_serial8250_port *p;
+ struct list_head node;
+
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+ int context_valid;
+
+ /* Registers to be saved/restored for OFF-mode */
+ u16 dll;
+ u16 dlh;
+ u16 ier;
+ u16 sysc;
+ u16 scr;
+ u16 wer;
+#endif
+};
+
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
+static LIST_HEAD(uart_list);
static struct plat_serial8250_port serial_platform_data[] = {
{
* properly. Note that the TX watermark initialization may not be needed
* once the 8250.c watermark handling code is merged.
*/
-static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
+static inline void __init omap_uart_reset(struct omap_uart_state *uart)
{
+ struct plat_serial8250_port *p = uart->p;
+
serial_write_reg(p, UART_OMAP_MDR1, 0x07);
serial_write_reg(p, UART_OMAP_SCR, 0x08);
serial_write_reg(p, UART_OMAP_MDR1, 0x00);
serial_write_reg(p, UART_OMAP_SYSC, (0x02 << 3) | (1 << 2) | (1 << 0));
}
-void omap_serial_enable_clocks(int enable)
+#if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
+
+static int enable_off_mode; /* to be removed by full off-mode patches */
+
+static void omap_uart_save_context(struct omap_uart_state *uart)
{
- int i;
- for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
- if (uart_ick[i] && uart_fck[i]) {
- if (enable) {
- clk_enable(uart_ick[i]);
- clk_enable(uart_fck[i]);
- } else {
- clk_disable(uart_ick[i]);
- clk_disable(uart_fck[i]);
+ u16 lcr = 0;
+ struct plat_serial8250_port *p = uart->p;
+
+ if (!enable_off_mode)
+ return;
+
+ lcr = serial_read_reg(p, UART_LCR);
+ serial_write_reg(p, UART_LCR, 0xBF);
+ uart->dll = serial_read_reg(p, UART_DLL);
+ uart->dlh = serial_read_reg(p, UART_DLM);
+ serial_write_reg(p, UART_LCR, lcr);
+ uart->ier = serial_read_reg(p, UART_IER);
+ uart->sysc = serial_read_reg(p, UART_OMAP_SYSC);
+ uart->scr = serial_read_reg(p, UART_OMAP_SCR);
+ uart->wer = serial_read_reg(p, UART_OMAP_WER);
+
+ uart->context_valid = 1;
+}
+
+static void omap_uart_restore_context(struct omap_uart_state *uart)
+{
+ u16 efr = 0;
+ struct plat_serial8250_port *p = uart->p;
+
+ if (!enable_off_mode)
+ return;
+
+ if (!uart->context_valid)
+ return;
+
+ uart->context_valid = 0;
+
+ serial_write_reg(p, UART_OMAP_MDR1, 0x7);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ efr = serial_read_reg(p, UART_EFR);
+ serial_write_reg(p, UART_EFR, UART_EFR_ECB);
+ serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(p, UART_IER, 0x0);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(p, UART_DLL, uart->dll);
+ serial_write_reg(p, UART_DLM, uart->dlh);
+ serial_write_reg(p, UART_LCR, 0x0); /* Operational mode */
+ serial_write_reg(p, UART_IER, uart->ier);
+ serial_write_reg(p, UART_FCR, 0xA1);
+ serial_write_reg(p, UART_LCR, 0xBF); /* Config B mode */
+ serial_write_reg(p, UART_EFR, efr);
+ serial_write_reg(p, UART_LCR, UART_LCR_WLEN8);
+ serial_write_reg(p, UART_OMAP_SCR, uart->scr);
+ serial_write_reg(p, UART_OMAP_WER, uart->wer);
+ serial_write_reg(p, UART_OMAP_SYSC, uart->sysc);
+ serial_write_reg(p, UART_OMAP_MDR1, 0x00); /* UART 16x mode */
+}
+#else
+static inline void omap_uart_save_context(struct omap_uart_state *uart) {}
+static inline void omap_uart_restore_context(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM && CONFIG_ARCH_OMAP3 */
+
+static inline void omap_uart_enable_clocks(struct omap_uart_state *uart)
+{
+ if (uart->clocked)
+ return;
+
+ clk_enable(uart->ick);
+ clk_enable(uart->fck);
+ uart->clocked = 1;
+ omap_uart_restore_context(uart);
+}
+
+#ifdef CONFIG_PM
+
+static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
+{
+ if (!uart->clocked)
+ return;
+
+ omap_uart_save_context(uart);
+ uart->clocked = 0;
+ clk_disable(uart->ick);
+ clk_disable(uart->fck);
+}
+
+static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
+ int enable)
+{
+ struct plat_serial8250_port *p = uart->p;
+ u16 sysc;
+
+ sysc = serial_read_reg(p, UART_OMAP_SYSC) & 0x7;
+ if (enable)
+ sysc |= 0x2 << 3;
+ else
+ sysc |= 0x1 << 3;
+
+ serial_write_reg(p, UART_OMAP_SYSC, sysc);
+}
+
+static void omap_uart_block_sleep(struct omap_uart_state *uart)
+{
+ omap_uart_enable_clocks(uart);
+
+ omap_uart_smart_idle_enable(uart, 0);
+ uart->can_sleep = 0;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ del_timer(&uart->timer);
+}
+
+static void omap_uart_allow_sleep(struct omap_uart_state *uart)
+{
+ if (!uart->clocked)
+ return;
+
+ omap_uart_smart_idle_enable(uart, 1);
+ uart->can_sleep = 1;
+ del_timer(&uart->timer);
+}
+
+static void omap_uart_idle_timer(unsigned long data)
+{
+ struct omap_uart_state *uart = (struct omap_uart_state *)data;
+
+ omap_uart_allow_sleep(uart);
+}
+
+void omap_uart_prepare_idle(int num)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (num == uart->num && uart->can_sleep) {
+ omap_uart_disable_clocks(uart);
+ return;
+ }
+ }
+}
+
+void omap_uart_resume_idle(int num)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (num == uart->num) {
+ omap_uart_enable_clocks(uart);
+
+ /* Check for IO pad wakeup */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 p = omap_ctrl_readw(uart->padconf);
+
+ if (p & OMAP3_PADCONF_WAKEUPEVENT0)
+ omap_uart_block_sleep(uart);
}
+
+ /* Check for normal UART wakeup */
+ if (__raw_readl(uart->wk_st) & uart->wk_mask)
+ omap_uart_block_sleep(uart);
+
+ return;
}
}
}
+void omap_uart_prepare_suspend(void)
+{
+ struct omap_uart_state *uart;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ omap_uart_allow_sleep(uart);
+ }
+}
+
+int omap_uart_can_sleep(void)
+{
+ struct omap_uart_state *uart;
+ int can_sleep = 1;
+
+ list_for_each_entry(uart, &uart_list, node) {
+ if (!uart->clocked)
+ continue;
+
+ if (!uart->can_sleep) {
+ can_sleep = 0;
+ continue;
+ }
+
+ /* This UART can now safely sleep. */
+ omap_uart_allow_sleep(uart);
+ }
+
+ return can_sleep;
+}
+
+/**
+ * omap_uart_interrupt()
+ *
+ * This handler is used only to detect that *any* UART interrupt has
+ * occurred. It does _nothing_ to handle the interrupt. Rather,
+ * any UART interrupt will trigger the inactivity timer so the
+ * UART will not idle or sleep for its timeout period.
+ *
+ **/
+static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
+{
+ struct omap_uart_state *uart = dev_id;
+
+ omap_uart_block_sleep(uart);
+
+ return IRQ_NONE;
+}
+
+static u32 sleep_timeout = DEFAULT_TIMEOUT;
+
+static void omap_uart_idle_init(struct omap_uart_state *uart)
+{
+ u32 v;
+ struct plat_serial8250_port *p = uart->p;
+ int ret;
+
+ uart->can_sleep = 0;
+ uart->timeout = sleep_timeout;
+ setup_timer(&uart->timer, omap_uart_idle_timer,
+ (unsigned long) uart);
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ omap_uart_smart_idle_enable(uart, 0);
+
+ if (cpu_is_omap34xx()) {
+ u32 mod = (uart->num == 2) ? OMAP3430_PER_MOD : CORE_MOD;
+ u32 wk_mask = 0;
+ u32 padconf = 0;
+
+ uart->wk_en = OMAP34XX_PRM_REGADDR(mod, PM_WKEN1);
+ uart->wk_st = OMAP34XX_PRM_REGADDR(mod, PM_WKST1);
+ switch (uart->num) {
+ case 0:
+ wk_mask = OMAP3430_ST_UART1_MASK;
+ padconf = 0x182;
+ break;
+ case 1:
+ wk_mask = OMAP3430_ST_UART2_MASK;
+ padconf = 0x17a;
+ break;
+ case 2:
+ wk_mask = OMAP3430_ST_UART3_MASK;
+ padconf = 0x19e;
+ break;
+ }
+ uart->wk_mask = wk_mask;
+ uart->padconf = padconf;
+ } else if (cpu_is_omap24xx()) {
+ u32 wk_mask = 0;
+
+ if (cpu_is_omap2430()) {
+ uart->wk_en = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+ uart->wk_st = OMAP2430_PRM_REGADDR(CORE_MOD, PM_WKST1);
+ } else if (cpu_is_omap2420()) {
+ uart->wk_en = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKEN1);
+ uart->wk_st = OMAP2420_PRM_REGADDR(CORE_MOD, PM_WKST1);
+ }
+ switch (uart->num) {
+ case 0:
+ wk_mask = OMAP24XX_ST_UART1_MASK;
+ break;
+ case 1:
+ wk_mask = OMAP24XX_ST_UART2_MASK;
+ break;
+ case 2:
+ wk_mask = OMAP24XX_ST_UART3_MASK;
+ break;
+ }
+ uart->wk_mask = wk_mask;
+ } else {
+ uart->wk_en = 0;
+ uart->wk_st = 0;
+ uart->wk_mask = 0;
+ uart->padconf = 0;
+ }
+
+ /* Set wake-enable bit */
+ if (uart->wk_en && uart->wk_mask) {
+ v = __raw_readl(uart->wk_en);
+ v |= uart->wk_mask;
+ __raw_writel(v, uart->wk_en);
+ }
+
+ /* Ensure IOPAD wake-enables are set */
+ if (cpu_is_omap34xx() && uart->padconf) {
+ u16 v;
+
+ v = omap_ctrl_readw(uart->padconf);
+ v |= OMAP3_PADCONF_WAKEUPENABLE0;
+ omap_ctrl_writew(v, uart->padconf);
+ }
+
+ p->flags |= UPF_SHARE_IRQ;
+ ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
+ "serial idle", (void *)uart);
+ WARN_ON(ret);
+}
+
+static ssize_t sleep_timeout_show(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%u\n", sleep_timeout / HZ);
+}
+
+static ssize_t sleep_timeout_store(struct kobject *kobj,
+ struct kobj_attribute *attr,
+ const char *buf, size_t n)
+{
+ struct omap_uart_state *uart;
+ unsigned int value;
+
+ if (sscanf(buf, "%u", &value) != 1) {
+ printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
+ return -EINVAL;
+ }
+ sleep_timeout = value * HZ;
+ list_for_each_entry(uart, &uart_list, node) {
+ uart->timeout = sleep_timeout;
+ if (uart->timeout)
+ mod_timer(&uart->timer, jiffies + uart->timeout);
+ else
+ /* A zero value means disable timeout feature */
+ omap_uart_block_sleep(uart);
+ }
+ return n;
+}
+
+static struct kobj_attribute sleep_timeout_attr =
+ __ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+
+#else
+static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#endif /* CONFIG_PM */
+
+static struct platform_device serial_device = {
+ .name = "serial8250",
+ .id = PLAT8250_DEV_PLATFORM,
+ .dev = {
+ .platform_data = serial_platform_data,
+ },
+};
+
void __init omap_serial_init(void)
{
- int i;
+ int i, err;
const struct omap_uart_config *info;
char name[16];
if (info == NULL)
return;
+ if (cpu_is_omap44xx()) {
+ for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
+ serial_platform_data[i].irq += 32;
+ }
for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
struct plat_serial8250_port *p = serial_platform_data + i;
+ struct omap_uart_state *uart = &omap_uart[i];
if (!(info->enabled_uarts & (1 << i))) {
p->membase = NULL;
}
sprintf(name, "uart%d_ick", i+1);
- uart_ick[i] = clk_get(NULL, name);
- if (IS_ERR(uart_ick[i])) {
+ uart->ick = clk_get(NULL, name);
+ if (IS_ERR(uart->ick)) {
printk(KERN_ERR "Could not get uart%d_ick\n", i+1);
- uart_ick[i] = NULL;
- } else
- clk_enable(uart_ick[i]);
+ uart->ick = NULL;
+ }
sprintf(name, "uart%d_fck", i+1);
- uart_fck[i] = clk_get(NULL, name);
- if (IS_ERR(uart_fck[i])) {
+ uart->fck = clk_get(NULL, name);
+ if (IS_ERR(uart->fck)) {
printk(KERN_ERR "Could not get uart%d_fck\n", i+1);
- uart_fck[i] = NULL;
- } else
- clk_enable(uart_fck[i]);
+ uart->fck = NULL;
+ }
- omap_serial_reset(p);
+ if (!uart->ick || !uart->fck)
+ continue;
+
+ uart->num = i;
+ p->private_data = uart;
+ uart->p = p;
+ list_add(&uart->node, &uart_list);
+
+ omap_uart_enable_clocks(uart);
+ omap_uart_reset(uart);
+ omap_uart_idle_init(uart);
}
-}
-static struct platform_device serial_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = serial_platform_data,
- },
-};
+ err = platform_device_register(&serial_device);
+
+#ifdef CONFIG_PM
+ if (!err)
+ err = sysfs_create_file(&serial_device.dev.kobj,
+ &sleep_timeout_attr.attr);
+#endif
-static int __init omap_init(void)
-{
- return platform_device_register(&serial_device);
}
-arch_initcall(omap_init);
+
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <mach/io.h>
-#include <mach/pm.h>
#include <mach/omap24xx.h>
--- /dev/null
+/*
+ * linux/arch/arm/mach-omap2/sleep.S
+ *
+ * (C) Copyright 2007
+ * Texas Instruments
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * (C) Copyright 2004
+ * Texas Instruments, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/io.h>
+#include <mach/control.h>
+
+#include "prm.h"
+#include "sdrc.h"
+
+#define PM_PREPWSTST_CORE_V OMAP34XX_PRM_REGADDR(CORE_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_MPU_V OMAP34XX_PRM_REGADDR(MPU_MOD, \
+ OMAP3430_PM_PREPWSTST)
+#define PM_PWSTCTRL_MPU_P OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define SCRATCHPAD_MEM_OFFS 0x310 /* Move this as correct place is
+ * available */
+#define SCRATCHPAD_BASE_P OMAP343X_CTRL_REGADDR(\
+ OMAP343X_CONTROL_MEM_WKUP +\
+ SCRATCHPAD_MEM_OFFS)
+#define SDRC_POWER_V OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+
+ .text
+/* Function call to get the restore pointer for resume from OFF */
+ENTRY(get_restore_pointer)
+ stmfd sp!, {lr} @ save registers on stack
+ adr r0, restore
+ ldmfd sp!, {pc} @ restore regs and return
+ENTRY(get_restore_pointer_sz)
+ .word . - get_restore_pointer_sz
+/*
+ * Forces OMAP into idle state
+ *
+ * omap34xx_suspend() - This bit of code just executes the WFI
+ * for normal idles.
+ *
+ * Note: This code get's copied to internal SRAM at boot. When the OMAP
+ * wakes up it continues execution at the point it went to sleep.
+ */
+ENTRY(omap34xx_cpu_suspend)
+ stmfd sp!, {r0-r12, lr} @ save registers on stack
+loop:
+ /*b loop*/ @Enable to debug by stepping through code
+ /* r0 contains restore pointer in sdram */
+ /* r1 contains information about saving context */
+ ldr r4, sdrc_power @ read the SDRC_POWER register
+ ldr r5, [r4] @ read the contents of SDRC_POWER
+ orr r5, r5, #0x40 @ enable self refresh on idle req
+ str r5, [r4] @ write back to SDRC_POWER register
+
+ cmp r1, #0x0
+ /* If context save is required, do that and execute wfi */
+ bne save_context_wfi
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+restore:
+ /* b restore*/ @ Enable to debug restore code
+ /* Check what was the reason for mpu reset and store the reason in r9*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost - In this case, we wont be here */
+ /* 3 - Both L1 and L2 lost */
+ ldr r1, pm_pwstctrl_mpu
+ ldr r2, [r1]
+ and r2, r2, #0x3
+ cmp r2, #0x0 @ Check if target power state was OFF or RET
+ moveq r9, #0x3 @ MPU OFF => L1 and L2 lost
+ movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation
+ bne logic_l1_restore
+ /* Execute smi to invalidate L2 cache */
+ mov r12, #0x1 @ set up to invalide L2
+smi: .word 0xE1600070 @ Call SMI monitor (smieq)
+logic_l1_restore:
+ mov r1, #0
+ /* Invalidate all instruction caches to PoU
+ * and flush branch target cache */
+ mcr p15, 0, r1, c7, c5, 0
+
+ ldr r4, scratchpad_base
+ ldr r3, [r4,#0xBC]
+ ldmia r3!, {r4-r6}
+ mov sp, r4
+ msr spsr_cxsf, r5
+ mov lr, r6
+
+ ldmia r3!, {r4-r9}
+ /* Coprocessor access Control Register */
+ mcr p15, 0, r4, c1, c0, 2
+
+ /* TTBR0 */
+ MCR p15, 0, r5, c2, c0, 0
+ /* TTBR1 */
+ MCR p15, 0, r6, c2, c0, 1
+ /* Translation table base control register */
+ MCR p15, 0, r7, c2, c0, 2
+ /*domain access Control Register */
+ MCR p15, 0, r8, c3, c0, 0
+ /* data fault status Register */
+ MCR p15, 0, r9, c5, c0, 0
+
+ ldmia r3!,{r4-r8}
+ /* instruction fault status Register */
+ MCR p15, 0, r4, c5, c0, 1
+ /*Data Auxiliary Fault Status Register */
+ MCR p15, 0, r5, c5, c1, 0
+ /*Instruction Auxiliary Fault Status Register*/
+ MCR p15, 0, r6, c5, c1, 1
+ /*Data Fault Address Register */
+ MCR p15, 0, r7, c6, c0, 0
+ /*Instruction Fault Address Register*/
+ MCR p15, 0, r8, c6, c0, 2
+ ldmia r3!,{r4-r7}
+
+ /* user r/w thread and process ID */
+ MCR p15, 0, r4, c13, c0, 2
+ /* user ro thread and process ID */
+ MCR p15, 0, r5, c13, c0, 3
+ /*Privileged only thread and process ID */
+ MCR p15, 0, r6, c13, c0, 4
+ /* cache size selection */
+ MCR p15, 2, r7, c0, c0, 0
+ ldmia r3!,{r4-r8}
+ /* Data TLB lockdown registers */
+ MCR p15, 0, r4, c10, c0, 0
+ /* Instruction TLB lockdown registers */
+ MCR p15, 0, r5, c10, c0, 1
+ /* Secure or Nonsecure Vector Base Address */
+ MCR p15, 0, r6, c12, c0, 0
+ /* FCSE PID */
+ MCR p15, 0, r7, c13, c0, 0
+ /* Context PID */
+ MCR p15, 0, r8, c13, c0, 1
+
+ ldmia r3!,{r4-r5}
+ /* primary memory remap register */
+ MCR p15, 0, r4, c10, c2, 0
+ /*normal memory remap register */
+ MCR p15, 0, r5, c10, c2, 1
+
+ /* Restore cpsr */
+ ldmia r3!,{r4} /*load CPSR from SDRAM*/
+ msr cpsr, r4 /*store cpsr */
+
+ /* Enabling MMU here */
+ mrc p15, 0, r7, c2, c0, 2 /* Read TTBRControl */
+ /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1*/
+ and r7, #0x7
+ cmp r7, #0x0
+ beq usettbr0
+ttbr_error:
+ /* More work needs to be done to support N[0:2] value other than 0
+ * So looping here so that the error can be detected
+ */
+ b ttbr_error
+usettbr0:
+ mrc p15, 0, r2, c2, c0, 0
+ ldr r5, ttbrbit_mask
+ and r2, r5
+ mov r4, pc
+ ldr r5, table_index_mask
+ and r4, r5 /* r4 = 31 to 20 bits of pc */
+ /* Extract the value to be written to table entry */
+ ldr r1, table_entry
+ add r1, r1, r4 /* r1 has value to be written to table entry*/
+ /* Getting the address of table entry to modify */
+ lsr r4, #18
+ add r2, r4 /* r2 has the location which needs to be modified */
+ /* Storing previous entry of location being modified */
+ ldr r5, scratchpad_base
+ ldr r4, [r2]
+ str r4, [r5, #0xC0]
+ /* Modify the table entry */
+ str r1, [r2]
+ /* Storing address of entry being modified
+ * - will be restored after enabling MMU */
+ ldr r5, scratchpad_base
+ str r2, [r5, #0xC4]
+
+ mov r0, #0
+ mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer
+ mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array
+ mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB
+ mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB
+ /* Restore control register but dont enable caches here*/
+ /* Caches will be enabled after restoring MMU table entry */
+ ldmia r3!, {r4}
+ /* Store previous value of control register in scratchpad */
+ str r4, [r5, #0xC8]
+ ldr r2, cache_pred_disable_mask
+ and r4, r2
+ mcr p15, 0, r4, c1, c0, 0
+
+ ldmfd sp!, {r0-r12, pc} @ restore regs and return
+save_context_wfi:
+ /*b save_context_wfi*/ @ enable to debug save code
+ mov r8, r0 /* Store SDRAM address in r8 */
+ /* Check what that target sleep state is:stored in r1*/
+ /* 1 - Only L1 and logic lost */
+ /* 2 - Only L2 lost */
+ /* 3 - Both L1 and L2 lost */
+ cmp r1, #0x2 /* Only L2 lost */
+ beq clean_l2
+ cmp r1, #0x1 /* L2 retained */
+ /* r9 stores whether to clean L2 or not*/
+ moveq r9, #0x0 /* Dont Clean L2 */
+ movne r9, #0x1 /* Clean L2 */
+l1_logic_lost:
+ /* Store sp and spsr to SDRAM */
+ mov r4, sp
+ mrs r5, spsr
+ mov r6, lr
+ stmia r8!, {r4-r6}
+ /* Save all ARM registers */
+ /* Coprocessor access control register */
+ mrc p15, 0, r6, c1, c0, 2
+ stmia r8!, {r6}
+ /* TTBR0, TTBR1 and Translation table base control */
+ mrc p15, 0, r4, c2, c0, 0
+ mrc p15, 0, r5, c2, c0, 1
+ mrc p15, 0, r6, c2, c0, 2
+ stmia r8!, {r4-r6}
+ /* Domain access control register, data fault status register,
+ and instruction fault status register */
+ mrc p15, 0, r4, c3, c0, 0
+ mrc p15, 0, r5, c5, c0, 0
+ mrc p15, 0, r6, c5, c0, 1
+ stmia r8!, {r4-r6}
+ /* Data aux fault status register, instruction aux fault status,
+ datat fault address register and instruction fault address register*/
+ mrc p15, 0, r4, c5, c1, 0
+ mrc p15, 0, r5, c5, c1, 1
+ mrc p15, 0, r6, c6, c0, 0
+ mrc p15, 0, r7, c6, c0, 2
+ stmia r8!, {r4-r7}
+ /* user r/w thread and process ID, user r/o thread and process ID,
+ priv only thread and process ID, cache size selection */
+ mrc p15, 0, r4, c13, c0, 2
+ mrc p15, 0, r5, c13, c0, 3
+ mrc p15, 0, r6, c13, c0, 4
+ mrc p15, 2, r7, c0, c0, 0
+ stmia r8!, {r4-r7}
+ /* Data TLB lockdown, instruction TLB lockdown registers */
+ mrc p15, 0, r5, c10, c0, 0
+ mrc p15, 0, r6, c10, c0, 1
+ stmia r8!, {r5-r6}
+ /* Secure or non secure vector base address, FCSE PID, Context PID*/
+ mrc p15, 0, r4, c12, c0, 0
+ mrc p15, 0, r5, c13, c0, 0
+ mrc p15, 0, r6, c13, c0, 1
+ stmia r8!, {r4-r6}
+ /* Primary remap, normal remap registers */
+ mrc p15, 0, r4, c10, c2, 0
+ mrc p15, 0, r5, c10, c2, 1
+ stmia r8!,{r4-r5}
+
+ /* Store current cpsr*/
+ mrs r2, cpsr
+ stmia r8!, {r2}
+
+ mrc p15, 0, r4, c1, c0, 0
+ /* save control register */
+ stmia r8!, {r4}
+clean_caches:
+ /* Clean Data or unified cache to POU*/
+ /* How to invalidate only L1 cache???? - #FIX_ME# */
+ /* mcr p15, 0, r11, c7, c11, 1 */
+ cmp r9, #1 /* Check whether L2 inval is required or not*/
+ bne skip_l2_inval
+clean_l2:
+ /* read clidr */
+ mrc p15, 1, r0, c0, c0, 1
+ /* extract loc from clidr */
+ ands r3, r0, #0x7000000
+ /* left align loc bit field */
+ mov r3, r3, lsr #23
+ /* if loc is 0, then no need to clean */
+ beq finished
+ /* start clean at cache level 0 */
+ mov r10, #0
+loop1:
+ /* work out 3x current cache level */
+ add r2, r10, r10, lsr #1
+ /* extract cache type bits from clidr*/
+ mov r1, r0, lsr r2
+ /* mask of the bits for current cache only */
+ and r1, r1, #7
+ /* see what cache we have at this level */
+ cmp r1, #2
+ /* skip if no cache, or just i-cache */
+ blt skip
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ /* isb to sych the new cssr&csidr */
+ isb
+ /* read the new csidr */
+ mrc p15, 1, r1, c0, c0, 0
+ /* extract the length of the cache lines */
+ and r2, r1, #7
+ /* add 4 (line length offset) */
+ add r2, r2, #4
+ ldr r4, assoc_mask
+ /* find maximum number on the way size */
+ ands r4, r4, r1, lsr #3
+ /* find bit position of way size increment */
+ clz r5, r4
+ ldr r7, numset_mask
+ /* extract max number of the index size*/
+ ands r7, r7, r1, lsr #13
+loop2:
+ mov r9, r4
+ /* create working copy of max way size*/
+loop3:
+ /* factor way and cache number into r11 */
+ orr r11, r10, r9, lsl r5
+ /* factor index number into r11 */
+ orr r11, r11, r7, lsl r2
+ /*clean & invalidate by set/way */
+ mcr p15, 0, r11, c7, c10, 2
+ /* decrement the way*/
+ subs r9, r9, #1
+ bge loop3
+ /*decrement the index */
+ subs r7, r7, #1
+ bge loop2
+skip:
+ add r10, r10, #2
+ /* increment cache number */
+ cmp r3, r10
+ bgt loop1
+finished:
+ /*swith back to cache level 0 */
+ mov r10, #0
+ /* select current cache level in cssr */
+ mcr p15, 2, r10, c0, c0, 0
+ isb
+skip_l2_inval:
+ /* Data memory barrier and Data sync barrier */
+ mov r1, #0
+ mcr p15, 0, r1, c7, c10, 4
+ mcr p15, 0, r1, c7, c10, 5
+
+ wfi @ wait for interrupt
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ nop
+ bl i_dll_wait
+ /* restore regs and return */
+ ldmfd sp!, {r0-r12, pc}
+
+i_dll_wait:
+ ldr r4, clk_stabilize_delay
+
+i_dll_delay:
+ subs r4, r4, #0x1
+ bne i_dll_delay
+ ldr r4, sdrc_power
+ ldr r5, [r4]
+ bic r5, r5, #0x40
+ str r5, [r4]
+ bx lr
+pm_prepwstst_core:
+ .word PM_PREPWSTST_CORE_V
+pm_prepwstst_mpu:
+ .word PM_PREPWSTST_MPU_V
+pm_pwstctrl_mpu:
+ .word PM_PWSTCTRL_MPU_P
+scratchpad_base:
+ .word SCRATCHPAD_BASE_P
+sdrc_power:
+ .word SDRC_POWER_V
+context_mem:
+ .word 0x803E3E14
+clk_stabilize_delay:
+ .word 0x000001FF
+assoc_mask:
+ .word 0x3ff
+numset_mask:
+ .word 0x7fff
+ttbrbit_mask:
+ .word 0xFFFFC000
+table_index_mask:
+ .word 0xFFF00000
+table_entry:
+ .word 0x00000C02
+cache_pred_disable_mask:
+ .word 0xFFFFE7FB
+ENTRY(omap34xx_cpu_suspend_sz)
+ .word . - omap34xx_cpu_suspend
omap242x_sdi_sdrc_dlla_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap242x_sdi_prcm_voltctrl:
- .word OMAP242X_PRCM_VOLTCTRL
+ .word OMAP2420_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
omap242x_sdi_timer_32ksynct_cr:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_ddr_init_sz)
.word . - omap242x_sram_ddr_init
omap242x_srs_sdrc_rfr_ctrl:
.word OMAP242X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap242x_srs_prcm_voltctrl:
- .word OMAP242X_PRCM_VOLTCTRL
+ .word OMAP2420_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap242x_srs_timer_32ksynct:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
ENTRY(omap242x_sram_reprogram_sdrc_sz)
.word . - omap242x_sram_reprogram_sdrc
ldmfd sp!, {r0-r12, pc} @ restore regs and return
omap242x_ssp_set_config:
- .word OMAP242X_PRCM_CLKCFG_CTRL
+ .word OMAP2420_PRCM_CLKCFG_CTRL
omap242x_ssp_pll_ctl:
.word OMAP2420_CM_REGADDR(PLL_MOD, CM_CLKEN)
omap242x_ssp_pll_stat:
omap243x_sdi_sdrc_dlla_ctrl:
.word OMAP243X_SDRC_REGADDR(SDRC_DLLA_CTRL)
omap243x_sdi_prcm_voltctrl:
- .word OMAP243X_PRCM_VOLTCTRL
+ .word OMAP2430_PRCM_VOLTCTRL
prcm_mask_val:
.word 0xFFFF3FFC
omap243x_sdi_timer_32ksynct_cr:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_ddr_init_sz)
.word . - omap243x_sram_ddr_init
omap243x_srs_sdrc_rfr_ctrl:
.word OMAP243X_SDRC_REGADDR(SDRC_RFR_CTRL_0)
omap243x_srs_prcm_voltctrl:
- .word OMAP243X_PRCM_VOLTCTRL
+ .word OMAP2430_PRCM_VOLTCTRL
ddr_prcm_mask_val:
.word 0xFFFF3FFC
omap243x_srs_timer_32ksynct:
- .word IO_ADDRESS(OMAP2_32KSYNCT_BASE + 0x010)
+ .word IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
ENTRY(omap243x_sram_reprogram_sdrc_sz)
.word . - omap243x_sram_reprogram_sdrc
ldmfd sp!, {r0-r12, pc} @ restore regs and return
omap243x_ssp_set_config:
- .word OMAP243X_PRCM_CLKCFG_CTRL
+ .word OMAP2430_PRCM_CLKCFG_CTRL
omap243x_ssp_pll_ctl:
.word OMAP2430_CM_REGADDR(PLL_MOD, CM_CLKEN)
omap243x_ssp_pll_stat:
/*
* Change frequency of core dpll
* r0 = sdrc_rfr_ctrl r1 = sdrc_actim_ctrla r2 = sdrc_actim_ctrlb r3 = M2
+ * r4 = Unlock SDRC DLL? (1 = yes, 0 = no) -- only unlock DLL for
+ * SDRC rates < 83MHz
*/
ENTRY(omap3_sram_configure_core_dpll)
stmfd sp!, {r1-r12, lr} @ store regs to stack
+ ldr r4, [sp, #52] @ pull extra args off the stack
+ dsb @ flush buffered writes to interconnect
cmp r3, #0x2
blne configure_sdrc
- cmp r3, #0x2
+ cmp r4, #0x1
+ bleq unlock_dll
blne lock_dll
- cmp r3, #0x1
- blne unlock_dll
bl sdram_in_selfrefresh @ put the SDRAM in self refresh
bl configure_core_dpll
bl enable_sdrc
- cmp r3, #0x1
- blne wait_dll_unlock
- cmp r3, #0x2
+ cmp r4, #0x1
+ bleq wait_dll_unlock
blne wait_dll_lock
cmp r3, #0x1
blne configure_sdrc
+ isb @ prevent speculative exec past here
mov r0, #0 @ return value
ldmfd sp!, {r1-r12, pc} @ restore regs and return
unlock_dll:
- ldr r4, omap3_sdrc_dlla_ctrl
- ldr r5, [r4]
- orr r5, r5, #0x4
- str r5, [r4]
+ ldr r11, omap3_sdrc_dlla_ctrl
+ ldr r12, [r11]
+ orr r12, r12, #0x4
+ str r12, [r11] @ (no OCP barrier needed)
bx lr
lock_dll:
- ldr r4, omap3_sdrc_dlla_ctrl
- ldr r5, [r4]
- bic r5, r5, #0x4
- str r5, [r4]
+ ldr r11, omap3_sdrc_dlla_ctrl
+ ldr r12, [r11]
+ bic r12, r12, #0x4
+ str r12, [r11] @ (no OCP barrier needed)
bx lr
sdram_in_selfrefresh:
- mov r5, #0x0 @ Move 0 to R5
- mcr p15, 0, r5, c7, c10, 5 @ memory barrier
- ldr r4, omap3_sdrc_power @ read the SDRC_POWER register
- ldr r5, [r4] @ read the contents of SDRC_POWER
- orr r5, r5, #0x40 @ enable self refresh on idle req
- str r5, [r4] @ write back to SDRC_POWER register
- ldr r4, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
- ldr r5, [r4]
- bic r5, r5, #0x2 @ disable iclk bit for SRDC
- str r5, [r4]
+ ldr r11, omap3_sdrc_power @ read the SDRC_POWER register
+ ldr r12, [r11] @ read the contents of SDRC_POWER
+ mov r9, r12 @ keep a copy of SDRC_POWER bits
+ orr r12, r12, #0x40 @ enable self refresh on idle req
+ bic r12, r12, #0x4 @ clear PWDENA
+ str r12, [r11] @ write back to SDRC_POWER register
+ ldr r12, [r11] @ posted-write barrier for SDRC
+ ldr r11, omap3_cm_iclken1_core @ read the CM_ICLKEN1_CORE reg
+ ldr r12, [r11]
+ bic r12, r12, #0x2 @ disable iclk bit for SDRC
+ str r12, [r11]
wait_sdrc_idle:
- ldr r4, omap3_cm_idlest1_core
- ldr r5, [r4]
- and r5, r5, #0x2 @ check for SDRC idle
- cmp r5, #2
+ ldr r11, omap3_cm_idlest1_core
+ ldr r12, [r11]
+ and r12, r12, #0x2 @ check for SDRC idle
+ cmp r12, #2
bne wait_sdrc_idle
bx lr
configure_core_dpll:
- ldr r4, omap3_cm_clksel1_pll
- ldr r5, [r4]
- ldr r6, core_m2_mask_val @ modify m2 for core dpll
- and r5, r5, r6
- orr r5, r5, r3, lsl #0x1B @ r3 contains the M2 val
- str r5, [r4]
- mov r5, #0x800 @ wait for the clock to stabilise
+ ldr r11, omap3_cm_clksel1_pll
+ ldr r12, [r11]
+ ldr r10, core_m2_mask_val @ modify m2 for core dpll
+ and r12, r12, r10
+ orr r12, r12, r3, lsl #0x1B @ r3 contains the M2 val
+ str r12, [r11]
+ ldr r12, [r11] @ posted-write barrier for CM
+ mov r12, #0x800 @ wait for the clock to stabilise
cmp r3, #2
bne wait_clk_stable
bx lr
wait_clk_stable:
- subs r5, r5, #1
+ subs r12, r12, #1
bne wait_clk_stable
nop
nop
nop
bx lr
enable_sdrc:
- ldr r4, omap3_cm_iclken1_core
- ldr r5, [r4]
- orr r5, r5, #0x2 @ enable iclk bit for SDRC
- str r5, [r4]
+ ldr r11, omap3_cm_iclken1_core
+ ldr r12, [r11]
+ orr r12, r12, #0x2 @ enable iclk bit for SDRC
+ str r12, [r11]
wait_sdrc_idle1:
- ldr r4, omap3_cm_idlest1_core
- ldr r5, [r4]
- and r5, r5, #0x2
- cmp r5, #0
+ ldr r11, omap3_cm_idlest1_core
+ ldr r12, [r11]
+ and r12, r12, #0x2
+ cmp r12, #0
bne wait_sdrc_idle1
- ldr r4, omap3_sdrc_power
- ldr r5, [r4]
- bic r5, r5, #0x40
- str r5, [r4]
+restore_sdrc_power_val:
+ ldr r11, omap3_sdrc_power
+ str r9, [r11] @ restore SDRC_POWER, no barrier needed
bx lr
wait_dll_lock:
- ldr r4, omap3_sdrc_dlla_status
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x4
+ ldr r11, omap3_sdrc_dlla_status
+ ldr r12, [r11]
+ and r12, r12, #0x4
+ cmp r12, #0x4
bne wait_dll_lock
bx lr
wait_dll_unlock:
- ldr r4, omap3_sdrc_dlla_status
- ldr r5, [r4]
- and r5, r5, #0x4
- cmp r5, #0x0
+ ldr r11, omap3_sdrc_dlla_status
+ ldr r12, [r11]
+ and r12, r12, #0x4
+ cmp r12, #0x0
bne wait_dll_unlock
bx lr
configure_sdrc:
- ldr r4, omap3_sdrc_rfr_ctrl
- str r0, [r4]
- ldr r4, omap3_sdrc_actim_ctrla
- str r1, [r4]
- ldr r4, omap3_sdrc_actim_ctrlb
- str r2, [r4]
+ ldr r11, omap3_sdrc_rfr_ctrl
+ str r0, [r11]
+ ldr r11, omap3_sdrc_actim_ctrla
+ str r1, [r11]
+ ldr r11, omap3_sdrc_actim_ctrlb
+ str r2, [r11]
+ ldr r2, [r11] @ posted-write barrier for SDRC
bx lr
omap3_sdrc_power:
*
* Some parts based off of TI's 24xx code:
*
- * Copyright (C) 2004 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Texas Instruments, Inc.
*
* Roughly modelled after the OMAP1 MPU timer code.
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
+#include <asm/localtimer.h>
/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
#define MAX_GPTIMER_ID 12
case CLOCK_EVT_MODE_PERIODIC:
period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
period -= 1;
-
+ if (cpu_is_omap44xx())
+ period = 0xff; /* FIXME: */
omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period);
break;
case CLOCK_EVT_MODE_ONESHOT:
"timer-gp: omap_dm_timer_set_source() failed\n");
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ if (cpu_is_omap44xx())
+ /* Assuming 32kHz clk is driving GPT1 */
+ tick_rate = 32768; /* FIXME: */
pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
gptimer_id, tick_rate);
static void __init omap2_gp_timer_init(void)
{
+#ifdef CONFIG_LOCAL_TIMERS
+ twd_base = IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+#endif
omap_dm_timer_init();
omap2_gp_clockevent_init();
--- /dev/null
+/*
+ * The MPU local timer source file. In OMAP4, both cortex-a9 cores have
+ * own timer in it's MPU domain. These timers will be driving the
+ * linux kernel SMP tick framework when active. These timers are not
+ * part of the wake up domain.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This file is based on arm realview smp platform file.
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+ evt->irq = INT_44XX_LOCALTIMER_IRQ;
+ twd_timer_setup(evt);
+}
+
#include <mach/hardware.h>
#include <mach/irqs.h>
-#include <mach/pm.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#define OTG_SYSCONFIG (OMAP34XX_HSUSB_OTG_BASE + 0x404)
+
+static void __init usb_musb_pm_init(void)
+{
+ /* Ensure force-idle mode for OTG controller */
+ if (cpu_is_omap34xx())
+ omap_writel(0, OTG_SYSCONFIG);
+}
+
+#ifdef CONFIG_USB_MUSB_SOC
+
static struct resource musb_resources[] = {
[0] = { /* start and end set dynamically */
.flags = IORESOURCE_MEM,
printk(KERN_ERR "Unable to register HS-USB (MUSB) device\n");
return;
}
+
+ usb_musb_pm_init();
+}
+
+#else
+void __init usb_musb_init(void)
+{
+ usb_musb_pm_init();
}
+#endif /* CONFIG_USB_MUSB_SOC */
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
+#include <linux/errno.h>
#include <mach/hardware.h>
#include "common.h"
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
+#define TARGET_SRAM 9
#define ATTR_PCIE_MEM 0x59
#define ATTR_PCIE_IO 0x51
#define ATTR_PCIE_WA 0x79
#define ATTR_DEV_CS1 0x1d
#define ATTR_DEV_CS2 0x1b
#define ATTR_DEV_BOOT 0xf
+#define ATTR_SRAM 0x0
/*
* Helpers to get DDR bank info
return 0;
}
-static void __init setup_cpu_win(int win, u32 base, u32 size,
+static int __init setup_cpu_win(int win, u32 base, u32 size,
u8 target, u8 attr, int remap)
{
if (win >= 8) {
printk(KERN_ERR "setup_cpu_win: trying to allocate "
"window %d\n", win);
- return;
+ return -ENOSPC;
}
writel(base & 0xffff0000, CPU_WIN_BASE(win));
writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
writel(0, CPU_WIN_REMAP_HI(win));
}
+ return 0;
}
void __init orion5x_setup_cpu_mbus_bridge(void)
setup_cpu_win(win_alloc_count++, base, size,
TARGET_PCIE, ATTR_PCIE_WA, -1);
}
+
+int __init orion5x_setup_sram_win(void)
+{
+ return setup_cpu_win(win_alloc_count, ORION5X_SRAM_PHYS_BASE,
+ ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
+}
#include <plat/ehci-orion.h>
#include <plat/mv_xor.h>
#include <plat/orion_nand.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
#include <plat/time.h>
#include "common.h"
.id = 0,
.num_resources = 1,
.resource = orion5x_eth_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource orion5x_i2c_resources[] = {
{
- .name = "i2c base",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c irq",
.start = IRQ_ORION5X_I2C,
.end = IRQ_ORION5X_I2C,
.flags = IORESOURCE_IRQ,
platform_device_register(&orion5x_xor1_channel);
}
+static struct resource orion5x_crypto_res[] = {
+ {
+ .name = "regs",
+ .start = ORION5X_CRYPTO_PHYS_BASE,
+ .end = ORION5X_CRYPTO_PHYS_BASE + 0xffff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "sram",
+ .start = ORION5X_SRAM_PHYS_BASE,
+ .end = ORION5X_SRAM_PHYS_BASE + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "crypto interrupt",
+ .start = IRQ_ORION5X_CESA,
+ .end = IRQ_ORION5X_CESA,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device orion5x_crypto_device = {
+ .name = "mv_crypto",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(orion5x_crypto_res),
+ .resource = orion5x_crypto_res,
+};
+
+int __init orion5x_crypto_init(void)
+{
+ int ret;
+
+ ret = orion5x_setup_sram_win();
+ if (ret)
+ return ret;
+
+ return platform_device_register(&orion5x_crypto_device);
+}
/*****************************************************************************
* Watchdog
****************************************************************************/
-static struct orion5x_wdt_platform_data orion5x_wdt_data = {
+static struct orion_wdt_platform_data orion5x_wdt_data = {
.tclk = 0,
};
static struct platform_device orion5x_wdt_device = {
- .name = "orion5x_wdt",
+ .name = "orion_wdt",
.id = -1,
.dev = {
.platform_data = &orion5x_wdt_data,
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
+int orion5x_setup_sram_win(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
void orion5x_uart0_init(void);
void orion5x_uart1_init(void);
void orion5x_xor_init(void);
+int orion5x_crypto_init(void);
/*
* PCIe/PCI functions.
#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
-#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
-#define WDT_RESET 0x0002
+#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET_OUT_EN 0x0002
#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
* f1000000 on-chip peripheral registers
* f2000000 PCIe I/O space
* f2100000 PCI I/O space
+ * f2200000 SRAM dedicated for the crypto unit
* f4000000 device bus mappings (boot)
* fa000000 device bus mappings (cs0)
* fa800000 device bus mappings (cs2)
#define ORION5X_PCI_IO_BUS_BASE 0x00100000
#define ORION5X_PCI_IO_SIZE SZ_1M
+#define ORION5X_SRAM_PHYS_BASE (0xf2200000)
+#define ORION5X_SRAM_SIZE SZ_8K
+
/* Relevant only for Orion-1/Orion-NAS */
#define ORION5X_PCIE_WA_PHYS_BASE 0xf0000000
#define ORION5X_PCIE_WA_VIRT_BASE 0xfe000000
#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
+#define ORION5X_CRYPTO_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x90000)
+
#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
/*
* Enable and issue soft reset
*/
- orion5x_setbits(CPU_RESET_MASK, (1 << 2));
+ orion5x_setbits(RSTOUTn_MASK, (1 << 2));
orion5x_setbits(CPU_SOFT_RESET, 1);
}
u32 mpp_8_15_ctrl = readl(MPP_8_15_CTRL);
u32 mpp_16_19_ctrl = readl(MPP_16_19_CTRL);
+ /* Initialize gpiolib. */
+ orion_gpio_init();
+
while (mode->mpp >= 0) {
u32 *reg;
int num_type;
/*
* Enable and issue soft reset
*/
- reg = readl(CPU_RESET_MASK);
+ reg = readl(RSTOUTn_MASK);
reg |= 1 << 2;
- writel(reg, CPU_RESET_MASK);
+ writel(reg, RSTOUTn_MASK);
reg = readl(CPU_SOFT_RESET);
reg |= 1;
/* Technologic Systems */
struct fpga_device ts_rtc;
struct fpga_device ts_nand;
+ struct fpga_device ts_rng;
};
struct ts78xx_fpga_data {
#include <linux/m48t86.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/timeriomem-rng.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
platform_device_del(&ts78xx_ts_nand_device);
}
+/*****************************************************************************
+ * HW RNG
+ ****************************************************************************/
+#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
+
+static struct resource ts78xx_ts_rng_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = TS_RNG_DATA,
+ .end = TS_RNG_DATA + 4 - 1,
+};
+
+static struct timeriomem_rng_data ts78xx_ts_rng_data = {
+ .period = 1000000, /* one second */
+};
+
+static struct platform_device ts78xx_ts_rng_device = {
+ .name = "timeriomem_rng",
+ .id = -1,
+ .dev = {
+ .platform_data = &ts78xx_ts_rng_data,
+ },
+ .resource = &ts78xx_ts_rng_resource,
+ .num_resources = 1,
+};
+
+static int ts78xx_ts_rng_load(void)
+{
+ int rc;
+
+ if (ts78xx_fpga.supports.ts_rng.init == 0) {
+ rc = platform_device_register(&ts78xx_ts_rng_device);
+ if (!rc)
+ ts78xx_fpga.supports.ts_rng.init = 1;
+ } else
+ rc = platform_device_add(&ts78xx_ts_rng_device);
+
+ return rc;
+};
+
+static void ts78xx_ts_rng_unload(void)
+{
+ platform_device_del(&ts78xx_ts_rng_device);
+}
+
/*****************************************************************************
* FPGA 'hotplug' support code
****************************************************************************/
{
ts78xx_fpga.supports.ts_rtc.init = 0;
ts78xx_fpga.supports.ts_nand.init = 0;
+ ts78xx_fpga.supports.ts_rng.init = 0;
}
static void ts78xx_fpga_supports(void)
case TS7800_REV_5:
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
+ ts78xx_fpga.supports.ts_rng.present = 1;
break;
default:
ts78xx_fpga.supports.ts_rtc.present = 0;
ts78xx_fpga.supports.ts_nand.present = 0;
+ ts78xx_fpga.supports.ts_rng.present = 0;
}
}
}
ret |= tmp;
}
+ if (ts78xx_fpga.supports.ts_rng.present == 1) {
+ tmp = ts78xx_ts_rng_load();
+ if (tmp) {
+ printk(KERN_INFO "TS-78xx: RNG not registered\n");
+ ts78xx_fpga.supports.ts_rng.present = 0;
+ }
+ ret |= tmp;
+ }
return ret;
}
ts78xx_ts_rtc_unload();
if (ts78xx_fpga.supports.ts_nand.present == 1)
ts78xx_ts_nand_unload();
+ if (ts78xx_fpga.supports.ts_rng.present == 1)
+ ts78xx_ts_rng_unload();
return ret;
}
#include <linux/mtd/physmap.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
+#include <net/dsa.h>
#include <asm/mach-types.h>
#include <asm/gpio.h>
#include <asm/mach/arch.h>
.duplex = DUPLEX_FULL,
};
+static struct dsa_chip_data wnr854t_switch_chip_data = {
+ .port_names[0] = "lan3",
+ .port_names[1] = "lan4",
+ .port_names[2] = "wan",
+ .port_names[3] = "cpu",
+ .port_names[5] = "lan1",
+ .port_names[7] = "lan2",
+};
+
+static struct dsa_platform_data wnr854t_switch_plat_data = {
+ .nr_chips = 1,
+ .chip = &wnr854t_switch_chip_data,
+};
+
static void __init wnr854t_init(void)
{
/*
* Configure peripherals.
*/
orion5x_eth_init(&wnr854t_eth_data);
+ orion5x_eth_switch_init(&wnr854t_switch_plat_data, NO_IRQ);
orion5x_uart0_init();
orion5x_setup_dev_boot_win(WNR854T_NOR_BOOT_BASE,
for (i = 0; i < num; i++)
clkdev_add(&clks[i]);
}
-
-int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
- struct device *dev)
-{
- struct clk *r = clk_get(dev, id);
- struct clk_lookup *l;
-
- if (!r)
- return -ENODEV;
-
- l = clkdev_alloc(r, alias, alias_dev_name);
- clk_put(r);
- if (!l)
- return -ENODEV;
- clkdev_add(l);
- return 0;
-}
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
GPIO24_GPIO, /* pcap chip select */
- GPIO1_GPIO, /* pcap interrupt */
- GPIO4_GPIO, /* WDI_AP */
- GPIO55_GPIO, /* SYS_RESTART */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
+ GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
+ GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
/* MMC */
GPIO32_MMC_CLK,
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
static unsigned long gen1_pin_config[] __initdata = {
/* flip / lockswitch */
- GPIO12_GPIO,
+ GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
/* bluetooth (bcm2035) */
- GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO48_GPIO, /* RESET */
GPIO28_GPIO, /* WAKEUP */
/* Neptune handshake */
- GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
- GPIO57_GPIO, /* AP_RDY */
- GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
- GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
- GPIO82_GPIO, /* RESET */
- GPIO99_GPIO, /* TC_MM_EN */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
+ GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
+ GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
/* sound */
GPIO52_SSP3_SCLK,
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
static unsigned long gen2_pin_config[] __initdata = {
/* flip / lockswitch */
- GPIO15_GPIO,
+ GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
/* EOC */
- GPIO10_GPIO,
+ GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
/* bluetooth (bcm2045) */
- GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO37_GPIO, /* RESET */
GPIO57_GPIO, /* WAKEUP */
/* Neptune handshake */
- GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
- GPIO96_GPIO, /* AP_RDY */
- GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
- GPIO116_GPIO, /* RESET */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO41_GPIO, /* BP_FLASH */
/* sound */
#define GPIO_NR_PALMLD_LED_AMBER 94
/* IDE */
-#define GPIO_NR_PALMLD_IDE_IRQ 95
#define GPIO_NR_PALMLD_IDE_RESET 98
#define GPIO_NR_PALMLD_IDE_PWEN 115
/**
* init_gpio_reset() - register GPIO as reset generator
* @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
*/
-extern int init_gpio_reset(int gpio, int output);
+extern int init_gpio_reset(int gpio, int output, int level);
#endif /* __ASM_ARCH_RESET_H */
#ifdef CONFIG_PM
static unsigned long saved_gafr[2][4];
static unsigned long saved_gpdr[4];
+static unsigned long saved_pgsr[4];
static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
saved_gpdr[i] = GPDR(i * 32);
+ saved_pgsr[i] = PGSR(i);
GPDR(i * 32) = gpdr_lpm[i];
}
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i];
+ PGSR(i) = saved_pgsr[i];
}
PSSR = PSSR_RDH | PSSR_PH;
return 0;
if (cpu_is_pxa27x())
pxa27x_mfp_init();
+ /* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+ PSSR = PSSR_RDH;
+
/* initialize gafr_run[], pgsr_lpm[] from existing values */
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO108_GPIO, /* ir disable */
GPIO81_GPIO, /* wifi reset */
/* HDD */
- GPIO95_GPIO, /* HDD irq */
+ GPIO98_GPIO, /* HDD reset */
GPIO115_GPIO, /* HDD power */
/* MISC */
},
};
+/******************************************************************************
+ * HDD
+ ******************************************************************************/
+static struct platform_device palmld_hdd = {
+ .name = "pata_palmld",
+ .id = -1,
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
&palmld_leds,
&power_supply,
&palmld_asoc,
+ &palmld_hdd,
};
static struct map_desc palmld_io_desc[] __initdata = {
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
static int reset_gpio = -1;
-int init_gpio_reset(int gpio, int output)
+int init_gpio_reset(int gpio, int output, int level)
{
int rc;
}
if (output)
- rc = gpio_direction_output(gpio, 0);
+ rc = gpio_direction_output(gpio, level);
else
rc = gpio_direction_input(gpio);
if (rc) {
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
}
+static void spitz_ohci_exit(struct device *dev)
+{
+ gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
static struct pxaohci_platform_data spitz_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.init = spitz_ohci_init,
+ .exit = spitz_ohci_exit,
.flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
.power_budget = 150,
};
static void __init common_init(void)
{
- init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
+ init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
- init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+ init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;
config REALVIEW_EB_ARM11MP_REVB
bool "Support ARM11MPCore RevB tile"
depends on REALVIEW_EB_ARM11MP
- default n
help
Enable support for the ARM11MPCore RevB tile on the Realview
platform. Since there are device address differences, a
help
Include support for the ARM(R) RealView ARM1176 Platform Baseboard.
+config REALVIEW_PB1176_SECURE_FLASH
+ bool "Allow access to the secure flash memory block"
+ depends on MACH_REALVIEW_PB1176
+ default n
+ help
+ Select this option if Linux will only run in secure mode on the
+ RealView PB1176 platform and access to the secure flash memory
+ block (64MB @ 0x3c000000) is required.
+
config MACH_REALVIEW_PBA8
bool "Support RealView/PB-A8 platform"
select CPU_V7
PB-A8 is a platform with an on-board Cortex-A8 and has support for
PCI-E and Compact Flash.
+config MACH_REALVIEW_PBX
+ bool "Support RealView/PBX platform"
+ select ARM_GIC
+ select HAVE_PATA_PLATFORM
+ help
+ Include support for the ARM(R) RealView PBX platform.
+
config REALVIEW_HIGH_PHYS_OFFSET
bool "High physical base address for the RealView platform"
depends on !MACH_REALVIEW_PB1176
obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o
obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o
obj-$(CONFIG_MACH_REALVIEW_PBA8) += realview_pba8.o
-obj-$(CONFIG_SMP) += platsmp.o headsmp.o localtimer.o
+obj-$(CONFIG_MACH_REALVIEW_PBX) += realview_pbx.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
#include <asm/hardware/gic.h>
+#include <mach/platform.h>
+#include <mach/irqs.h>
+
#include "core.h"
#include "clock.h"
{
unsigned long flags;
u32 val;
+ u32 led = 1 << smp_processor_id();
local_irq_save(flags);
val = readl(VA_LEDS_BASE);
switch (ledevt) {
case led_idle_start:
- val = val & ~REALVIEW_SYS_LED0;
+ val = val & ~led;
break;
case led_idle_end:
- val = val | REALVIEW_SYS_LED0;
+ val = val | led;
break;
case led_timer:
- val = val ^ REALVIEW_SYS_LED1;
+ val = val ^ REALVIEW_SYS_LED7;
break;
case led_halted:
extern struct mmc_platform_data realview_mmc1_plat_data;
extern struct clcd_board clcd_plat_data;
extern void __iomem *gic_cpu_base_addr;
-#ifdef CONFIG_LOCAL_TIMERS
-extern void __iomem *twd_base;
-#endif
extern void __iomem *timer0_va_base;
extern void __iomem *timer1_va_base;
extern void __iomem *timer2_va_base;
#define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */
#endif
-#define IRQ_EB_GIC_START 32
-
-/*
- * RealView EB interrupt sources
- */
-#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */
-#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */
-#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */
-#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */
-#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */
-#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */
-#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */
-#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */
-#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */
-#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */
-#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */
-#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */
-#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */
-#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */
-#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */
-#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */
-
-/*
- * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
- */
-#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0)
-#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1)
-#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2)
-#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3)
-#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4)
-#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5)
-#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6)
-#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7)
-#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8)
-#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9)
-#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */
-#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */
-#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */
-#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */
-#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14)
-#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15)
-
-#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17)
-#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18)
-#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19)
-#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20)
-#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21)
-#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22)
-#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23)
-#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24)
-#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25)
-#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26)
-#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27)
-#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28)
-
-#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29)
-#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
-#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
-
-#define IRQ_EB11MP_UART2 -1
-#define IRQ_EB11MP_UART3 -1
-#define IRQ_EB11MP_CLCD -1
-#define IRQ_EB11MP_DMA -1
-#define IRQ_EB11MP_WDOG -1
-#define IRQ_EB11MP_GPIO0 -1
-#define IRQ_EB11MP_GPIO1 -1
-#define IRQ_EB11MP_GPIO2 -1
-#define IRQ_EB11MP_SCI -1
-#define IRQ_EB11MP_SSP -1
-
-#define NR_GIC_EB11MP 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_EB
- */
-#define NR_IRQS_EB (IRQ_EB_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_EB) \
- && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_EB
-#endif
-
-#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
- && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_EB11MP
-#endif
-
/*
* Core tile identification (REALVIEW_SYS_PROCID)
*/
#define REALVIEW_PB1176_SDRAM67_BASE 0x70000000 /* SDRAM banks 6 and 7 */
#define REALVIEW_PB1176_FLASH_BASE 0x30000000
#define REALVIEW_PB1176_FLASH_SIZE SZ_64M
+#define REALVIEW_PB1176_SEC_FLASH_BASE 0x3C000000 /* Secure flash */
+#define REALVIEW_PB1176_SEC_FLASH_SIZE SZ_64M
#define REALVIEW_PB1176_TIMER0_1_BASE 0x10104000 /* Timer 0 and 1 */
#define REALVIEW_PB1176_TIMER2_3_BASE 0x10105000 /* Timer 2 and 3 */
#define REALVIEW_PB1176_GIC_DIST_BASE 0x10041000 /* GIC distributor, on FPGA */
#define REALVIEW_PB1176_L220_BASE 0x10110000 /* L220 registers */
-/*
- * Irqs
- */
-#define IRQ_DC1176_GIC_START 32
-#define IRQ_PB1176_GIC_START 64
-
-/*
- * ARM1176 DevChip interrupt sources (primary GIC)
- */
-#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */
-#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */
-#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */
-#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */
-#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */
-#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11)
-#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12)
-#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
-#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
-#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
-#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
-#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
-#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
-#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */
-
-#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */
-#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */
-
-/*
- * RealView PB1176 interrupt sources (secondary GIC)
- */
-#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */
-#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */
-#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */
-#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */
-#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5)
-#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */
-#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */
-#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8)
-#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9)
-#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */
-#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */
-
-#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16)
-
-#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */
-
-#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22)
-#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23)
-#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
-#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
-
-#define IRQ_PB1176_GPIO0 -1
-#define IRQ_PB1176_SSP -1
-#define IRQ_PB1176_SCTL -1
-
-#define NR_GIC_PB1176 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB1176
- */
-#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB1176)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PB1176
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PB1176
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PB1176 */
-
#endif /* __ASM_ARCH_BOARD_PB1176_H */
#define REALVIEW_TC11MP_GIC_DIST_BASE 0x1F001000 /* Test chip interrupt controller distributor */
#define REALVIEW_TC11MP_L220_BASE 0x1F002000 /* L220 registers */
-/*
- * Irqs
- */
-#define IRQ_TC11MP_GIC_START 32
-#define IRQ_PB11MP_GIC_START 64
-
-/*
- * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
- */
-#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0)
-#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1)
-#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2)
-#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3)
-#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4)
-#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5)
-#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6)
-#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7)
-#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8)
-#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9)
-#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */
-#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */
-#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */
-#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */
-#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14)
-#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15)
-
-#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17)
-#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18)
-#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19)
-#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20)
-#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21)
-#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22)
-#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23)
-#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24)
-#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25)
-#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26)
-#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27)
-#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28)
-
-#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29)
-#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30)
-#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31)
-
-/*
- * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
- */
-#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */
-#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */
-#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */
-#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */
-#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */
-#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */
-#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */
-#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */
-#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */
-#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */
-#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */
-#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */
-#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */
-#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */
-
-#define IRQ_PB11MP_SMC -1
-#define IRQ_PB11MP_SCTL -1
-
-#define NR_GIC_PB11MP 2
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PB11MP
- */
-#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96)
-
-#if defined(CONFIG_MACH_REALVIEW_PB11MP)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PB11MP
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PB11MP
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PB11MP */
-
#endif /* __ASM_ARCH_BOARD_PB11MP_H */
#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */
#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */
-/*
- * Irqs
- */
-#define IRQ_PBA8_GIC_START 32
-
-/* L220
-#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29)
-#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30)
-#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31)
-*/
-
-/*
- * PB-A8 on-board gic irq sources
- */
-#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
-#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
-#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
-#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
-#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
-#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
-#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
-#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
-#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
- /* 9 reserved */
-#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
-#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
-#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
-#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
-#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
-#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
-#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
-#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
-#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
-#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
-#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
-#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
-#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
-#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
-#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
-#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
-#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
-#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
-#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
-#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
-#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
-#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */
-
-/* ... */
-#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
-#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
-#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
-#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)
-
-#define IRQ_PBA8_SMC -1
-#define IRQ_PBA8_SCTL -1
-
-#define NR_GIC_PBA8 1
-
-/*
- * Only define NR_IRQS if less than NR_IRQS_PBA8
- */
-#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64)
-
-#if defined(CONFIG_MACH_REALVIEW_PBA8)
-
-#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
-#undef NR_IRQS
-#define NR_IRQS NR_IRQS_PBA8
-#endif
-
-#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
-#undef MAX_GIC_NR
-#define MAX_GIC_NR NR_GIC_PBA8
-#endif
-
-#endif /* CONFIG_MACH_REALVIEW_PBA8 */
-
#endif /* __ASM_ARCH_BOARD_PBA8_H */
--- /dev/null
+/*
+ * arch/arm/mach-realview/include/mach/board-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARCH_BOARD_PBX_H
+#define __ASM_ARCH_BOARD_PBX_H
+
+#include <mach/platform.h>
+
+/*
+ * Peripheral addresses
+ */
+#define REALVIEW_PBX_UART0_BASE 0x10009000 /* UART 0 */
+#define REALVIEW_PBX_UART1_BASE 0x1000A000 /* UART 1 */
+#define REALVIEW_PBX_UART2_BASE 0x1000B000 /* UART 2 */
+#define REALVIEW_PBX_UART3_BASE 0x1000C000 /* UART 3 */
+#define REALVIEW_PBX_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
+#define REALVIEW_PBX_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
+#define REALVIEW_PBX_WATCHDOG_BASE 0x10010000 /* watchdog interface */
+#define REALVIEW_PBX_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
+#define REALVIEW_PBX_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
+#define REALVIEW_PBX_GPIO0_BASE 0x10013000 /* GPIO port 0 */
+#define REALVIEW_PBX_RTC_BASE 0x10017000 /* Real Time Clock */
+#define REALVIEW_PBX_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
+#define REALVIEW_PBX_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
+#define REALVIEW_PBX_SCTL_BASE 0x1001A000 /* System Controller */
+#define REALVIEW_PBX_CLCD_BASE 0x10020000 /* CLCD */
+#define REALVIEW_PBX_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
+#define REALVIEW_PBX_DMC_BASE 0x100E0000 /* DMC configuration */
+#define REALVIEW_PBX_SMC_BASE 0x100E1000 /* SMC configuration */
+#define REALVIEW_PBX_CAN_BASE 0x100E2000 /* CAN bus */
+#define REALVIEW_PBX_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_FLASH0_BASE 0x40000000
+#define REALVIEW_PBX_FLASH0_SIZE SZ_64M
+#define REALVIEW_PBX_FLASH1_BASE 0x44000000
+#define REALVIEW_PBX_FLASH1_SIZE SZ_64M
+#define REALVIEW_PBX_ETH_BASE 0x4E000000 /* Ethernet */
+#define REALVIEW_PBX_USB_BASE 0x4F000000 /* USB */
+#define REALVIEW_PBX_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
+#define REALVIEW_PBX_LT_BASE 0xC0000000 /* Logic Tile expansion */
+#define REALVIEW_PBX_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
+#define REALVIEW_PBX_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */
+
+/*
+ * Tile-specific addresses
+ */
+#define REALVIEW_PBX_TILE_SCU_BASE 0x1F000000 /* SCU registers */
+#define REALVIEW_PBX_TILE_GIC_CPU_BASE 0x1F000100 /* Private Generic interrupt controller CPU interface */
+#define REALVIEW_PBX_TILE_TWD_BASE 0x1F000600
+#define REALVIEW_PBX_TILE_TWD_PERCPU_BASE 0x1F000700
+#define REALVIEW_PBX_TILE_TWD_SIZE 0x00000100
+#define REALVIEW_PBX_TILE_GIC_DIST_BASE 0x1F001000 /* Private Generic interrupt controller distributor */
+#define REALVIEW_PBX_TILE_L220_BASE 0x1F002000 /* L220 registers */
+
+#define REALVIEW_PBX_SYS_PLD_CTRL1 0x74
+
+/*
+ * PBX PCI regions
+ */
+#define REALVIEW_PBX_PCI_BASE 0x90040000 /* PCI-X Unit base */
+#define REALVIEW_PBX_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
+#define REALVIEW_PBX_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */
+
+#define REALVIEW_PBX_PCI_BASE_SIZE 0x10000 /* 16 Kb */
+#define REALVIEW_PBX_PCI_IO_SIZE 0x1000 /* 4 Kb */
+#define REALVIEW_PBX_PCI_MEM_SIZE 0x20000000 /* 512 MB */
+
+/*
+ * Core tile identification (REALVIEW_SYS_PROCID)
+ */
+#define REALVIEW_PBX_PROC_MASK 0xFF000000
+#define REALVIEW_PBX_PROC_ARM7TDMI 0x00000000
+#define REALVIEW_PBX_PROC_ARM9 0x02000000
+#define REALVIEW_PBX_PROC_ARM11 0x04000000
+#define REALVIEW_PBX_PROC_ARM11MP 0x06000000
+#define REALVIEW_PBX_PROC_A9MP 0x0C000000
+#define REALVIEW_PBX_PROC_A8 0x0E000000
+
+#define check_pbx_proc(proc_type) \
+ ((readl(__io_address(REALVIEW_SYS_PROCID)) & REALVIEW_PBX_PROC_MASK) \
+ == proc_type)
+
+#ifdef CONFIG_MACH_REALVIEW_PBX
+#define core_tile_pbx11mp() check_pbx_proc(REALVIEW_PBX_PROC_ARM11MP)
+#define core_tile_pbxa9mp() check_pbx_proc(REALVIEW_PBX_PROC_A9MP)
+#define core_tile_pbxa8() check_pbx_proc(REALVIEW_PBX_PROC_A8)
+#else
+#define core_tile_pbx11mp() 0
+#define core_tile_pbxa9mp() 0
+#define core_tile_pbxa8() 0
+#endif
+
+#endif /* __ASM_ARCH_BOARD_PBX_H */
#if defined(CONFIG_MACH_REALVIEW_EB) || \
defined(CONFIG_MACH_REALVIEW_PB11MP) || \
- defined(CONFIG_MACH_REALVIEW_PBA8)
+ defined(CONFIG_MACH_REALVIEW_PBA8) || \
+ defined(CONFIG_MACH_REALVIEW_PBX)
#ifndef DEBUG_LL_UART_OFFSET
#define DEBUG_LL_UART_OFFSET 0x00009000
#elif DEBUG_LL_UART_OFFSET != 0x00009000
--- /dev/null
+/*
+ * arch/arm/mach-realview/include/mach/irqs-eb.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_EB_H
+#define __MACH_IRQS_EB_H
+
+#define IRQ_EB_GIC_START 32
+
+/*
+ * RealView EB interrupt sources
+ */
+#define IRQ_EB_WDOG (IRQ_EB_GIC_START + 0) /* Watchdog timer */
+#define IRQ_EB_SOFT (IRQ_EB_GIC_START + 1) /* Software interrupt */
+#define IRQ_EB_COMMRx (IRQ_EB_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_EB_COMMTx (IRQ_EB_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_EB_TIMER0_1 (IRQ_EB_GIC_START + 4) /* Timer 0 and 1 */
+#define IRQ_EB_TIMER2_3 (IRQ_EB_GIC_START + 5) /* Timer 2 and 3 */
+#define IRQ_EB_GPIO0 (IRQ_EB_GIC_START + 6) /* GPIO 0 */
+#define IRQ_EB_GPIO1 (IRQ_EB_GIC_START + 7) /* GPIO 1 */
+#define IRQ_EB_GPIO2 (IRQ_EB_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_EB_RTC (IRQ_EB_GIC_START + 10) /* Real Time Clock */
+#define IRQ_EB_SSP (IRQ_EB_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_EB_UART0 (IRQ_EB_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_EB_UART1 (IRQ_EB_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_EB_UART2 (IRQ_EB_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_EB_UART3 (IRQ_EB_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_EB_SCI (IRQ_EB_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_EB_MMCI0A (IRQ_EB_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_EB_MMCI0B (IRQ_EB_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_EB_AACI (IRQ_EB_GIC_START + 19) /* Audio Codec */
+#define IRQ_EB_KMI0 (IRQ_EB_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_EB_KMI1 (IRQ_EB_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_EB_CHARLCD (IRQ_EB_GIC_START + 22) /* Character LCD */
+#define IRQ_EB_CLCD (IRQ_EB_GIC_START + 23) /* CLCD controller */
+#define IRQ_EB_DMA (IRQ_EB_GIC_START + 24) /* DMA controller */
+#define IRQ_EB_PWRFAIL (IRQ_EB_GIC_START + 25) /* Power failure */
+#define IRQ_EB_PISMO (IRQ_EB_GIC_START + 26) /* PISMO interface */
+#define IRQ_EB_DoC (IRQ_EB_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_EB_ETH (IRQ_EB_GIC_START + 28) /* Ethernet controller */
+#define IRQ_EB_USB (IRQ_EB_GIC_START + 29) /* USB controller */
+#define IRQ_EB_TSPEN (IRQ_EB_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_EB_TSKPAD (IRQ_EB_GIC_START + 31) /* Touchscreen keypad */
+
+/*
+ * RealView EB + ARM11MPCore interrupt sources (primary GIC on the core tile)
+ */
+#define IRQ_EB11MP_AACI (IRQ_EB_GIC_START + 0)
+#define IRQ_EB11MP_TIMER0_1 (IRQ_EB_GIC_START + 1)
+#define IRQ_EB11MP_TIMER2_3 (IRQ_EB_GIC_START + 2)
+#define IRQ_EB11MP_USB (IRQ_EB_GIC_START + 3)
+#define IRQ_EB11MP_UART0 (IRQ_EB_GIC_START + 4)
+#define IRQ_EB11MP_UART1 (IRQ_EB_GIC_START + 5)
+#define IRQ_EB11MP_RTC (IRQ_EB_GIC_START + 6)
+#define IRQ_EB11MP_KMI0 (IRQ_EB_GIC_START + 7)
+#define IRQ_EB11MP_KMI1 (IRQ_EB_GIC_START + 8)
+#define IRQ_EB11MP_ETH (IRQ_EB_GIC_START + 9)
+#define IRQ_EB11MP_EB_IRQ1 (IRQ_EB_GIC_START + 10) /* main GIC */
+#define IRQ_EB11MP_EB_IRQ2 (IRQ_EB_GIC_START + 11) /* tile GIC */
+#define IRQ_EB11MP_EB_FIQ1 (IRQ_EB_GIC_START + 12) /* main GIC */
+#define IRQ_EB11MP_EB_FIQ2 (IRQ_EB_GIC_START + 13) /* tile GIC */
+#define IRQ_EB11MP_MMCI0A (IRQ_EB_GIC_START + 14)
+#define IRQ_EB11MP_MMCI0B (IRQ_EB_GIC_START + 15)
+
+#define IRQ_EB11MP_PMU_CPU0 (IRQ_EB_GIC_START + 17)
+#define IRQ_EB11MP_PMU_CPU1 (IRQ_EB_GIC_START + 18)
+#define IRQ_EB11MP_PMU_CPU2 (IRQ_EB_GIC_START + 19)
+#define IRQ_EB11MP_PMU_CPU3 (IRQ_EB_GIC_START + 20)
+#define IRQ_EB11MP_PMU_SCU0 (IRQ_EB_GIC_START + 21)
+#define IRQ_EB11MP_PMU_SCU1 (IRQ_EB_GIC_START + 22)
+#define IRQ_EB11MP_PMU_SCU2 (IRQ_EB_GIC_START + 23)
+#define IRQ_EB11MP_PMU_SCU3 (IRQ_EB_GIC_START + 24)
+#define IRQ_EB11MP_PMU_SCU4 (IRQ_EB_GIC_START + 25)
+#define IRQ_EB11MP_PMU_SCU5 (IRQ_EB_GIC_START + 26)
+#define IRQ_EB11MP_PMU_SCU6 (IRQ_EB_GIC_START + 27)
+#define IRQ_EB11MP_PMU_SCU7 (IRQ_EB_GIC_START + 28)
+
+#define IRQ_EB11MP_L220_EVENT (IRQ_EB_GIC_START + 29)
+#define IRQ_EB11MP_L220_SLAVE (IRQ_EB_GIC_START + 30)
+#define IRQ_EB11MP_L220_DECODE (IRQ_EB_GIC_START + 31)
+
+#define IRQ_EB11MP_UART2 -1
+#define IRQ_EB11MP_UART3 -1
+#define IRQ_EB11MP_CLCD -1
+#define IRQ_EB11MP_DMA -1
+#define IRQ_EB11MP_WDOG -1
+#define IRQ_EB11MP_GPIO0 -1
+#define IRQ_EB11MP_GPIO1 -1
+#define IRQ_EB11MP_GPIO2 -1
+#define IRQ_EB11MP_SCI -1
+#define IRQ_EB11MP_SSP -1
+
+#define NR_GIC_EB11MP 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_EB
+ */
+#define NR_IRQS_EB (IRQ_EB_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_EB) \
+ && (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_EB
+#endif
+
+#if defined(CONFIG_REALVIEW_EB_ARM11MP) || defined(CONFIG_REALVIEW_EB_A9MP) \
+ && (!defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_EB11MP))
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_EB11MP
+#endif
+
+#endif /* __MACH_IRQS_EB_H */
--- /dev/null
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb1176.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB1176_H
+#define __MACH_IRQS_PB1176_H
+
+#define IRQ_DC1176_GIC_START 32
+#define IRQ_PB1176_GIC_START 64
+
+/*
+ * ARM1176 DevChip interrupt sources (primary GIC)
+ */
+#define IRQ_DC1176_WATCHDOG (IRQ_DC1176_GIC_START + 0) /* Watchdog timer */
+#define IRQ_DC1176_SOFTINT (IRQ_DC1176_GIC_START + 1) /* Software interrupt */
+#define IRQ_DC1176_COMMRx (IRQ_DC1176_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_DC1176_COMMTx (IRQ_DC1176_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_DC1176_TIMER0 (IRQ_DC1176_GIC_START + 8) /* Timer 0 */
+#define IRQ_DC1176_TIMER1 (IRQ_DC1176_GIC_START + 9) /* Timer 1 */
+#define IRQ_DC1176_TIMER2 (IRQ_DC1176_GIC_START + 10) /* Timer 2 */
+#define IRQ_DC1176_APC (IRQ_DC1176_GIC_START + 11)
+#define IRQ_DC1176_IEC (IRQ_DC1176_GIC_START + 12)
+#define IRQ_DC1176_L2CC (IRQ_DC1176_GIC_START + 13)
+#define IRQ_DC1176_RTC (IRQ_DC1176_GIC_START + 14)
+#define IRQ_DC1176_CLCD (IRQ_DC1176_GIC_START + 15) /* CLCD controller */
+#define IRQ_DC1176_UART0 (IRQ_DC1176_GIC_START + 18) /* UART 0 on development chip */
+#define IRQ_DC1176_UART1 (IRQ_DC1176_GIC_START + 19) /* UART 1 on development chip */
+#define IRQ_DC1176_UART2 (IRQ_DC1176_GIC_START + 20) /* UART 2 on development chip */
+#define IRQ_DC1176_UART3 (IRQ_DC1176_GIC_START + 21) /* UART 3 on development chip */
+
+#define IRQ_DC1176_PB_IRQ2 (IRQ_DC1176_GIC_START + 30) /* tile GIC */
+#define IRQ_DC1176_PB_IRQ1 (IRQ_DC1176_GIC_START + 31) /* main GIC */
+
+/*
+ * RealView PB1176 interrupt sources (secondary GIC)
+ */
+#define IRQ_PB1176_MMCI0A (IRQ_PB1176_GIC_START + 1) /* Multimedia Card 0A */
+#define IRQ_PB1176_MMCI0B (IRQ_PB1176_GIC_START + 2) /* Multimedia Card 0A */
+#define IRQ_PB1176_KMI0 (IRQ_PB1176_GIC_START + 3) /* Keyboard/Mouse port 0 */
+#define IRQ_PB1176_KMI1 (IRQ_PB1176_GIC_START + 4) /* Keyboard/Mouse port 1 */
+#define IRQ_PB1176_SCI (IRQ_PB1176_GIC_START + 5)
+#define IRQ_PB1176_UART4 (IRQ_PB1176_GIC_START + 6) /* UART 4 on baseboard */
+#define IRQ_PB1176_CHARLCD (IRQ_PB1176_GIC_START + 7) /* Character LCD */
+#define IRQ_PB1176_GPIO1 (IRQ_PB1176_GIC_START + 8)
+#define IRQ_PB1176_GPIO2 (IRQ_PB1176_GIC_START + 9)
+#define IRQ_PB1176_ETH (IRQ_PB1176_GIC_START + 10) /* Ethernet controller */
+#define IRQ_PB1176_USB (IRQ_PB1176_GIC_START + 11) /* USB controller */
+
+#define IRQ_PB1176_PISMO (IRQ_PB1176_GIC_START + 16)
+
+#define IRQ_PB1176_AACI (IRQ_PB1176_GIC_START + 19) /* Audio Codec */
+
+#define IRQ_PB1176_TIMER0_1 (IRQ_PB1176_GIC_START + 22)
+#define IRQ_PB1176_TIMER2_3 (IRQ_PB1176_GIC_START + 23)
+#define IRQ_PB1176_DMAC (IRQ_PB1176_GIC_START + 24) /* DMA controller */
+#define IRQ_PB1176_RTC (IRQ_PB1176_GIC_START + 25) /* Real Time Clock */
+
+#define IRQ_PB1176_GPIO0 -1
+#define IRQ_PB1176_SSP -1
+#define IRQ_PB1176_SCTL -1
+
+#define NR_GIC_PB1176 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB1176
+ */
+#define NR_IRQS_PB1176 (IRQ_DC1176_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB1176)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB1176)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PB1176
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB1176)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PB1176
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PB1176 */
+
+#endif /* __MACH_IRQS_PB1176_H */
--- /dev/null
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pb11mp.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PB11MP_H
+#define __MACH_IRQS_PB11MP_H
+
+#define IRQ_TC11MP_GIC_START 32
+#define IRQ_PB11MP_GIC_START 64
+
+/*
+ * ARM11MPCore test chip interrupt sources (primary GIC on the test chip)
+ */
+#define IRQ_TC11MP_AACI (IRQ_TC11MP_GIC_START + 0)
+#define IRQ_TC11MP_TIMER0_1 (IRQ_TC11MP_GIC_START + 1)
+#define IRQ_TC11MP_TIMER2_3 (IRQ_TC11MP_GIC_START + 2)
+#define IRQ_TC11MP_USB (IRQ_TC11MP_GIC_START + 3)
+#define IRQ_TC11MP_UART0 (IRQ_TC11MP_GIC_START + 4)
+#define IRQ_TC11MP_UART1 (IRQ_TC11MP_GIC_START + 5)
+#define IRQ_TC11MP_RTC (IRQ_TC11MP_GIC_START + 6)
+#define IRQ_TC11MP_KMI0 (IRQ_TC11MP_GIC_START + 7)
+#define IRQ_TC11MP_KMI1 (IRQ_TC11MP_GIC_START + 8)
+#define IRQ_TC11MP_ETH (IRQ_TC11MP_GIC_START + 9)
+#define IRQ_TC11MP_PB_IRQ1 (IRQ_TC11MP_GIC_START + 10) /* main GIC */
+#define IRQ_TC11MP_PB_IRQ2 (IRQ_TC11MP_GIC_START + 11) /* tile GIC */
+#define IRQ_TC11MP_PB_FIQ1 (IRQ_TC11MP_GIC_START + 12) /* main GIC */
+#define IRQ_TC11MP_PB_FIQ2 (IRQ_TC11MP_GIC_START + 13) /* tile GIC */
+#define IRQ_TC11MP_MMCI0A (IRQ_TC11MP_GIC_START + 14)
+#define IRQ_TC11MP_MMCI0B (IRQ_TC11MP_GIC_START + 15)
+
+#define IRQ_TC11MP_PMU_CPU0 (IRQ_TC11MP_GIC_START + 17)
+#define IRQ_TC11MP_PMU_CPU1 (IRQ_TC11MP_GIC_START + 18)
+#define IRQ_TC11MP_PMU_CPU2 (IRQ_TC11MP_GIC_START + 19)
+#define IRQ_TC11MP_PMU_CPU3 (IRQ_TC11MP_GIC_START + 20)
+#define IRQ_TC11MP_PMU_SCU0 (IRQ_TC11MP_GIC_START + 21)
+#define IRQ_TC11MP_PMU_SCU1 (IRQ_TC11MP_GIC_START + 22)
+#define IRQ_TC11MP_PMU_SCU2 (IRQ_TC11MP_GIC_START + 23)
+#define IRQ_TC11MP_PMU_SCU3 (IRQ_TC11MP_GIC_START + 24)
+#define IRQ_TC11MP_PMU_SCU4 (IRQ_TC11MP_GIC_START + 25)
+#define IRQ_TC11MP_PMU_SCU5 (IRQ_TC11MP_GIC_START + 26)
+#define IRQ_TC11MP_PMU_SCU6 (IRQ_TC11MP_GIC_START + 27)
+#define IRQ_TC11MP_PMU_SCU7 (IRQ_TC11MP_GIC_START + 28)
+
+#define IRQ_TC11MP_L220_EVENT (IRQ_TC11MP_GIC_START + 29)
+#define IRQ_TC11MP_L220_SLAVE (IRQ_TC11MP_GIC_START + 30)
+#define IRQ_TC11MP_L220_DECODE (IRQ_TC11MP_GIC_START + 31)
+
+/*
+ * RealView PB11MPCore GIC interrupt sources (secondary GIC on the board)
+ */
+#define IRQ_PB11MP_WATCHDOG (IRQ_PB11MP_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PB11MP_SOFT (IRQ_PB11MP_GIC_START + 1) /* Software interrupt */
+#define IRQ_PB11MP_COMMRx (IRQ_PB11MP_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PB11MP_COMMTx (IRQ_PB11MP_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PB11MP_GPIO0 (IRQ_PB11MP_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PB11MP_GPIO1 (IRQ_PB11MP_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PB11MP_GPIO2 (IRQ_PB11MP_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PB11MP_RTC_GIC1 (IRQ_PB11MP_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PB11MP_SSP (IRQ_PB11MP_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PB11MP_UART0_GIC1 (IRQ_PB11MP_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PB11MP_UART1_GIC1 (IRQ_PB11MP_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PB11MP_UART2 (IRQ_PB11MP_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PB11MP_UART3 (IRQ_PB11MP_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PB11MP_SCI (IRQ_PB11MP_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PB11MP_MMCI0A_GIC1 (IRQ_PB11MP_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PB11MP_MMCI0B_GIC1 (IRQ_PB11MP_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PB11MP_AACI_GIC1 (IRQ_PB11MP_GIC_START + 19) /* Audio Codec */
+#define IRQ_PB11MP_KMI0_GIC1 (IRQ_PB11MP_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PB11MP_KMI1_GIC1 (IRQ_PB11MP_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PB11MP_CHARLCD (IRQ_PB11MP_GIC_START + 22) /* Character LCD */
+#define IRQ_PB11MP_CLCD (IRQ_PB11MP_GIC_START + 23) /* CLCD controller */
+#define IRQ_PB11MP_DMAC (IRQ_PB11MP_GIC_START + 24) /* DMA controller */
+#define IRQ_PB11MP_PWRFAIL (IRQ_PB11MP_GIC_START + 25) /* Power failure */
+#define IRQ_PB11MP_PISMO (IRQ_PB11MP_GIC_START + 26) /* PISMO interface */
+#define IRQ_PB11MP_DoC (IRQ_PB11MP_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PB11MP_ETH_GIC1 (IRQ_PB11MP_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PB11MP_USB_GIC1 (IRQ_PB11MP_GIC_START + 29) /* USB controller */
+#define IRQ_PB11MP_TSPEN (IRQ_PB11MP_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PB11MP_TSKPAD (IRQ_PB11MP_GIC_START + 31) /* Touchscreen keypad */
+
+#define IRQ_PB11MP_SMC -1
+#define IRQ_PB11MP_SCTL -1
+
+#define NR_GIC_PB11MP 2
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PB11MP
+ */
+#define NR_IRQS_PB11MP (IRQ_TC11MP_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PB11MP)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PB11MP)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PB11MP
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PB11MP)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PB11MP
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PB11MP */
+
+#endif /* __MACH_IRQS_PB11MP_H */
--- /dev/null
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pba8.h
+ *
+ * Copyright (C) 2008 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IRQS_PBA8_H
+#define __MACH_IRQS_PBA8_H
+
+#define IRQ_PBA8_GIC_START 32
+
+/* L220
+#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29)
+#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30)
+#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31)
+*/
+
+/*
+ * PB-A8 on-board gic irq sources
+ */
+#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
+#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
+#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
+#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
+#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
+#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
+#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
+#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
+#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
+#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
+#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */
+
+/* ... */
+#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
+#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
+#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
+#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)
+
+#define IRQ_PBA8_SMC -1
+#define IRQ_PBA8_SCTL -1
+
+#define NR_GIC_PBA8 1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBA8
+ */
+#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64)
+
+#if defined(CONFIG_MACH_REALVIEW_PBA8)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PBA8
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PBA8
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PBA8 */
+
+#endif /* __MACH_IRQS_PBA8_H */
--- /dev/null
+/*
+ * arch/arm/mach-realview/include/mach/irqs-pbx.h
+ *
+ * Copyright (C) 2009 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __MACH_IRQS_PBX_H
+#define __MACH_IRQS_PBX_H
+
+#define IRQ_PBX_GIC_START 32
+
+/* L220
+#define IRQ_PBX_L220_EVENT (IRQ_PBX_GIC_START + 29)
+#define IRQ_PBX_L220_SLAVE (IRQ_PBX_GIC_START + 30)
+#define IRQ_PBX_L220_DECODE (IRQ_PBX_GIC_START + 31)
+*/
+
+/*
+ * PBX on-board gic irq sources
+ */
+#define IRQ_PBX_WATCHDOG (IRQ_PBX_GIC_START + 0) /* Watchdog timer */
+#define IRQ_PBX_SOFT (IRQ_PBX_GIC_START + 1) /* Software interrupt */
+#define IRQ_PBX_COMMRx (IRQ_PBX_GIC_START + 2) /* Debug Comm Rx interrupt */
+#define IRQ_PBX_COMMTx (IRQ_PBX_GIC_START + 3) /* Debug Comm Tx interrupt */
+#define IRQ_PBX_TIMER0_1 (IRQ_PBX_GIC_START + 4) /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER2_3 (IRQ_PBX_GIC_START + 5) /* Timer 2/3 */
+#define IRQ_PBX_GPIO0 (IRQ_PBX_GIC_START + 6) /* GPIO 0 */
+#define IRQ_PBX_GPIO1 (IRQ_PBX_GIC_START + 7) /* GPIO 1 */
+#define IRQ_PBX_GPIO2 (IRQ_PBX_GIC_START + 8) /* GPIO 2 */
+ /* 9 reserved */
+#define IRQ_PBX_RTC (IRQ_PBX_GIC_START + 10) /* Real Time Clock */
+#define IRQ_PBX_SSP (IRQ_PBX_GIC_START + 11) /* Synchronous Serial Port */
+#define IRQ_PBX_UART0 (IRQ_PBX_GIC_START + 12) /* UART 0 on development chip */
+#define IRQ_PBX_UART1 (IRQ_PBX_GIC_START + 13) /* UART 1 on development chip */
+#define IRQ_PBX_UART2 (IRQ_PBX_GIC_START + 14) /* UART 2 on development chip */
+#define IRQ_PBX_UART3 (IRQ_PBX_GIC_START + 15) /* UART 3 on development chip */
+#define IRQ_PBX_SCI (IRQ_PBX_GIC_START + 16) /* Smart Card Interface */
+#define IRQ_PBX_MMCI0A (IRQ_PBX_GIC_START + 17) /* Multimedia Card 0A */
+#define IRQ_PBX_MMCI0B (IRQ_PBX_GIC_START + 18) /* Multimedia Card 0B */
+#define IRQ_PBX_AACI (IRQ_PBX_GIC_START + 19) /* Audio Codec */
+#define IRQ_PBX_KMI0 (IRQ_PBX_GIC_START + 20) /* Keyboard/Mouse port 0 */
+#define IRQ_PBX_KMI1 (IRQ_PBX_GIC_START + 21) /* Keyboard/Mouse port 1 */
+#define IRQ_PBX_CHARLCD (IRQ_PBX_GIC_START + 22) /* Character LCD */
+#define IRQ_PBX_CLCD (IRQ_PBX_GIC_START + 23) /* CLCD controller */
+#define IRQ_PBX_DMAC (IRQ_PBX_GIC_START + 24) /* DMA controller */
+#define IRQ_PBX_PWRFAIL (IRQ_PBX_GIC_START + 25) /* Power failure */
+#define IRQ_PBX_PISMO (IRQ_PBX_GIC_START + 26) /* PISMO interface */
+#define IRQ_PBX_DoC (IRQ_PBX_GIC_START + 27) /* Disk on Chip memory controller */
+#define IRQ_PBX_ETH (IRQ_PBX_GIC_START + 28) /* Ethernet controller */
+#define IRQ_PBX_USB (IRQ_PBX_GIC_START + 29) /* USB controller */
+#define IRQ_PBX_TSPEN (IRQ_PBX_GIC_START + 30) /* Touchscreen pen */
+#define IRQ_PBX_TSKPAD (IRQ_PBX_GIC_START + 31) /* Touchscreen keypad */
+
+#define IRQ_PBX_PMU_SCU0 (IRQ_PBX_GIC_START + 32) /* SCU PMU Interrupts (11mp) */
+#define IRQ_PBX_PMU_SCU1 (IRQ_PBX_GIC_START + 33)
+#define IRQ_PBX_PMU_SCU2 (IRQ_PBX_GIC_START + 34)
+#define IRQ_PBX_PMU_SCU3 (IRQ_PBX_GIC_START + 35)
+#define IRQ_PBX_PMU_SCU4 (IRQ_PBX_GIC_START + 36)
+#define IRQ_PBX_PMU_SCU5 (IRQ_PBX_GIC_START + 37)
+#define IRQ_PBX_PMU_SCU6 (IRQ_PBX_GIC_START + 38)
+#define IRQ_PBX_PMU_SCU7 (IRQ_PBX_GIC_START + 39)
+
+#define IRQ_PBX_WATCHDOG1 (IRQ_PBX_GIC_START + 40) /* Watchdog1 timer */
+#define IRQ_PBX_TIMER4_5 (IRQ_PBX_GIC_START + 41) /* Timer 0/1 (default timer) */
+#define IRQ_PBX_TIMER6_7 (IRQ_PBX_GIC_START + 42) /* Timer 2/3 */
+/* ... */
+#define IRQ_PBX_PMU_CPU3 (IRQ_PBX_GIC_START + 44) /* CPU PMU Interrupts */
+#define IRQ_PBX_PMU_CPU2 (IRQ_PBX_GIC_START + 45)
+#define IRQ_PBX_PMU_CPU1 (IRQ_PBX_GIC_START + 46)
+#define IRQ_PBX_PMU_CPU0 (IRQ_PBX_GIC_START + 47)
+
+/* ... */
+#define IRQ_PBX_PCI0 (IRQ_PBX_GIC_START + 50)
+#define IRQ_PBX_PCI1 (IRQ_PBX_GIC_START + 51)
+#define IRQ_PBX_PCI2 (IRQ_PBX_GIC_START + 52)
+#define IRQ_PBX_PCI3 (IRQ_PBX_GIC_START + 53)
+
+#define IRQ_PBX_SMC -1
+#define IRQ_PBX_SCTL -1
+
+#define NR_GIC_PBX 1
+
+/*
+ * Only define NR_IRQS if less than NR_IRQS_PBX
+ */
+#define NR_IRQS_PBX (IRQ_PBX_GIC_START + 96)
+
+#if defined(CONFIG_MACH_REALVIEW_PBX)
+
+#if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBX)
+#undef NR_IRQS
+#define NR_IRQS NR_IRQS_PBX
+#endif
+
+#if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBX)
+#undef MAX_GIC_NR
+#define MAX_GIC_NR NR_GIC_PBX
+#endif
+
+#endif /* CONFIG_MACH_REALVIEW_PBX */
+
+#endif /* __MACH_IRQS_PBX_H */
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
-#include <mach/board-eb.h>
-#include <mach/board-pb11mp.h>
-#include <mach/board-pb1176.h>
-#include <mach/board-pba8.h>
+#include <mach/irqs-eb.h>
+#include <mach/irqs-pb11mp.h>
+#include <mach/irqs-pb1176.h>
+#include <mach/irqs-pba8.h>
+#include <mach/irqs-pbx.h>
#define IRQ_LOCALTIMER 29
#define IRQ_LOCALWDOG 30
+++ /dev/null
-#ifndef __ASMARM_ARCH_SCU_H
-#define __ASMARM_ARCH_SCU_H
-
-/*
- * SCU registers
- */
-#define SCU_CTRL 0x00
-#define SCU_CONFIG 0x04
-#define SCU_CPU_STATUS 0x08
-#define SCU_INVALIDATE 0x0c
-#define SCU_FPGA_REVISION 0x10
-
-#endif
#include <mach/board-pb11mp.h>
#include <mach/board-pb1176.h>
#include <mach/board-pba8.h>
+#include <mach/board-pbx.h>
#define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00))
#define AMBA_UART_LCRH(base) (*(volatile unsigned char *)((base) + 0x2c))
return REALVIEW_PB1176_UART0_BASE;
else if (machine_is_realview_pba8())
return REALVIEW_PBA8_UART0_BASE;
+ else if (machine_is_realview_pbx())
+ return REALVIEW_PBX_UART0_BASE;
else
return 0;
}
* published by the Free Software Foundation.
*/
#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/device.h>
#include <linux/smp.h>
-#include <linux/jiffies.h>
-#include <linux/percpu.h>
#include <linux/clockchips.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/hardware/arm_twd.h>
-#include <asm/hardware/gic.h>
-#include <mach/hardware.h>
#include <asm/irq.h>
-
-static DEFINE_PER_CPU(struct clock_event_device, local_clockevent);
-
-/*
- * Used on SMP for either the local timer or IPI_TIMER
- */
-void local_timer_interrupt(void)
-{
- struct clock_event_device *clk = &__get_cpu_var(local_clockevent);
-
- clk->event_handler(clk);
-}
-
-#ifdef CONFIG_LOCAL_TIMERS
-
-/* set up by the platform code */
-void __iomem *twd_base;
-
-static unsigned long mpcore_timer_rate;
-
-static void local_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
- unsigned long ctrl;
-
- switch(mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- /* timer load already set up */
- ctrl = TWD_TIMER_CONTROL_ENABLE | TWD_TIMER_CONTROL_IT_ENABLE
- | TWD_TIMER_CONTROL_PERIODIC;
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* period set, and timer enabled in 'next_event' hook */
- ctrl = TWD_TIMER_CONTROL_IT_ENABLE | TWD_TIMER_CONTROL_ONESHOT;
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- default:
- ctrl = 0;
- }
-
- __raw_writel(ctrl, twd_base + TWD_TIMER_CONTROL);
-}
-
-static int local_timer_set_next_event(unsigned long evt,
- struct clock_event_device *unused)
-{
- unsigned long ctrl = __raw_readl(twd_base + TWD_TIMER_CONTROL);
-
- __raw_writel(evt, twd_base + TWD_TIMER_COUNTER);
- __raw_writel(ctrl | TWD_TIMER_CONTROL_ENABLE, twd_base + TWD_TIMER_CONTROL);
-
- return 0;
-}
-
-/*
- * local_timer_ack: checks for a local timer interrupt.
- *
- * If a local timer interrupt has occurred, acknowledge and return 1.
- * Otherwise, return 0.
- */
-int local_timer_ack(void)
-{
- if (__raw_readl(twd_base + TWD_TIMER_INTSTAT)) {
- __raw_writel(1, twd_base + TWD_TIMER_INTSTAT);
- return 1;
- }
-
- return 0;
-}
-
-static void __cpuinit twd_calibrate_rate(void)
-{
- unsigned long load, count;
- u64 waitjiffies;
-
- /*
- * If this is the first time round, we need to work out how fast
- * the timer ticks
- */
- if (mpcore_timer_rate == 0) {
- printk("Calibrating local timer... ");
-
- /* Wait for a tick to start */
- waitjiffies = get_jiffies_64() + 1;
-
- while (get_jiffies_64() < waitjiffies)
- udelay(10);
-
- /* OK, now the tick has started, let's get the timer going */
- waitjiffies += 5;
-
- /* enable, no interrupt or reload */
- __raw_writel(0x1, twd_base + TWD_TIMER_CONTROL);
-
- /* maximum value */
- __raw_writel(0xFFFFFFFFU, twd_base + TWD_TIMER_COUNTER);
-
- while (get_jiffies_64() < waitjiffies)
- udelay(10);
-
- count = __raw_readl(twd_base + TWD_TIMER_COUNTER);
-
- mpcore_timer_rate = (0xFFFFFFFFU - count) * (HZ / 5);
-
- printk("%lu.%02luMHz.\n", mpcore_timer_rate / 1000000,
- (mpcore_timer_rate / 100000) % 100);
- }
-
- load = mpcore_timer_rate / HZ;
-
- __raw_writel(load, twd_base + TWD_TIMER_LOAD);
-}
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
/*
* Setup the local clock events for a CPU.
*/
-void __cpuinit local_timer_setup(void)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
- unsigned long flags;
-
- twd_calibrate_rate();
-
- clk->name = "local_timer";
- clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
- clk->rating = 350;
- clk->set_mode = local_timer_set_mode;
- clk->set_next_event = local_timer_set_next_event;
- clk->irq = IRQ_LOCALTIMER;
- clk->cpumask = cpumask_of(cpu);
- clk->shift = 20;
- clk->mult = div_sc(mpcore_timer_rate, NSEC_PER_SEC, clk->shift);
- clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
- clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
-
- /* Make sure our local interrupt controller has this enabled */
- local_irq_save(flags);
- get_irq_chip(IRQ_LOCALTIMER)->unmask(IRQ_LOCALTIMER);
- local_irq_restore(flags);
-
- clockevents_register_device(clk);
-}
-
-/*
- * take a local timer down
- */
-void __cpuexit local_timer_stop(void)
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
{
- __raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+ evt->irq = IRQ_LOCALTIMER;
+ twd_timer_setup(evt);
}
-
-#else /* CONFIG_LOCAL_TIMERS */
-
-static void dummy_timer_set_mode(enum clock_event_mode mode,
- struct clock_event_device *clk)
-{
-}
-
-void __cpuinit local_timer_setup(void)
-{
- unsigned int cpu = smp_processor_id();
- struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
-
- clk->name = "dummy_timer";
- clk->features = CLOCK_EVT_FEAT_ONESHOT |
- CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_DUMMY;
- clk->rating = 400;
- clk->mult = 1;
- clk->set_mode = dummy_timer_set_mode;
- clk->broadcast = smp_timer_broadcast;
- clk->cpumask = cpumask_of(cpu);
-
- clockevents_register_device(clk);
-}
-
-#endif /* !CONFIG_LOCAL_TIMERS */
#include <asm/cacheflush.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
+#include <asm/localtimer.h>
#include <mach/board-eb.h>
#include <mach/board-pb11mp.h>
-#include <mach/scu.h>
+#include <mach/board-pbx.h>
+#include <asm/smp_scu.h>
#include "core.h"
return __io_address(REALVIEW_EB11MP_SCU_BASE);
else if (machine_is_realview_pb11mp())
return __io_address(REALVIEW_TC11MP_SCU_BASE);
+ else if (machine_is_realview_pbx() &&
+ (core_tile_pbx11mp() || core_tile_pbxa9mp()))
+ return __io_address(REALVIEW_PBX_TILE_SCU_BASE);
else
return (void __iomem *)0;
}
-static unsigned int __init get_core_count(void)
+static inline unsigned int get_core_count(void)
{
- unsigned int ncores;
void __iomem *scu_base = scu_base_addr();
-
- if (scu_base) {
- ncores = __raw_readl(scu_base + SCU_CONFIG);
- ncores = (ncores & 0x03) + 1;
- } else
- ncores = 1;
-
- return ncores;
-}
-
-/*
- * Setup the SCU
- */
-static void scu_enable(void)
-{
- u32 scu_ctrl;
- void __iomem *scu_base = scu_base_addr();
-
- scu_ctrl = __raw_readl(scu_base + SCU_CTRL);
- scu_ctrl |= 1;
- __raw_writel(scu_ctrl, scu_base + SCU_CTRL);
+ if (scu_base)
+ return scu_get_core_count(scu_base);
+ return 1;
}
static DEFINE_SPINLOCK(boot_lock);
unsigned int i, ncores = get_core_count();
for (i = 0; i < ncores; i++)
- cpu_set(i, cpu_possible_map);
+ set_cpu_possible(i, true);
}
void __init smp_prepare_cpus(unsigned int max_cpus)
if (max_cpus > ncores)
max_cpus = ncores;
-#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
- /*
- * Enable the local timer or broadcast device for the boot CPU.
- */
- local_timer_setup();
-#endif
-
/*
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
*/
for (i = 0; i < max_cpus; i++)
- cpu_set(i, cpu_present_map);
+ set_cpu_present(i, true);
/*
* Initialise the SCU if there are more than one CPU and let
* WFI
*/
if (max_cpus > 1) {
- scu_enable();
+ /*
+ * Enable the local timer or broadcast device for the
+ * boot CPU, but only if we have more than one CPU.
+ */
+ percpu_timer_setup();
+
+ scu_enable(scu_base_addr());
poke_milo();
}
}
#include <asm/hardware/gic.h>
#include <asm/hardware/icst307.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
/*
* RealView PB1176 platform devices
*/
-static struct resource realview_pb1176_flash_resource = {
- .start = REALVIEW_PB1176_FLASH_BASE,
- .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
+static struct resource realview_pb1176_flash_resources[] = {
+ [0] = {
+ .start = REALVIEW_PB1176_FLASH_BASE,
+ .end = REALVIEW_PB1176_FLASH_BASE + REALVIEW_PB1176_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_PB1176_SEC_FLASH_BASE,
+ .end = REALVIEW_PB1176_SEC_FLASH_BASE + REALVIEW_PB1176_SEC_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
};
+#ifdef CONFIG_REALVIEW_PB1176_SECURE_FLASH
+#define PB1176_FLASH_BLOCKS 2
+#else
+#define PB1176_FLASH_BLOCKS 1
+#endif
static struct resource realview_pb1176_smsc911x_resources[] = {
[0] = {
l2x0_init(__io_address(REALVIEW_PB1176_L220_BASE), 0x00730000, 0xfe000fff);
#endif
- realview_flash_register(&realview_pb1176_flash_resource, 1);
+ realview_flash_register(realview_pb1176_flash_resources,
+ PB1176_FLASH_BLOCKS);
realview_eth_register(NULL, realview_pb1176_smsc911x_resources);
platform_device_register(&realview_i2c_device);
realview_usb_register(realview_pb1176_isp1761_resources);
#include <asm/hardware/gic.h>
#include <asm/hardware/icst307.h>
#include <asm/hardware/cache-l2x0.h>
+#include <asm/localtimer.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
--- /dev/null
+/*
+ * arch/arm/mach-realview/realview_pbx.c
+ *
+ * Copyright (C) 2009 ARM Limited
+ * Copyright (C) 2000 Deep Blue Solutions Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+
+#include <asm/irq.h>
+#include <asm/leds.h>
+#include <asm/mach-types.h>
+#include <asm/hardware/gic.h>
+#include <asm/hardware/cache-l2x0.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/mmc.h>
+#include <asm/mach/time.h>
+
+#include <mach/hardware.h>
+#include <mach/board-pbx.h>
+#include <mach/irqs.h>
+
+#include "core.h"
+
+static struct map_desc realview_pbx_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#ifdef CONFIG_PCI
+ {
+ .virtual = PCIX_UNIT_BASE,
+ .pfn = __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
+ .length = REALVIEW_PBX_PCI_BASE_SIZE,
+ .type = MT_DEVICE,
+ },
+#endif
+#ifdef CONFIG_DEBUG_LL
+ {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+#endif
+};
+
+static struct map_desc realview_local_io_desc[] __initdata = {
+ {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
+ .pfn = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
+ .length = SZ_8K,
+ .type = MT_DEVICE,
+ }
+};
+
+static void __init realview_pbx_map_io(void)
+{
+ iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
+ if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+ iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
+}
+
+/*
+ * RealView PBXCore AMBA devices
+ */
+
+#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
+#define GPIO2_DMA { 0, 0 }
+#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
+#define GPIO3_DMA { 0, 0 }
+#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
+#define AACI_DMA { 0x80, 0x81 }
+#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
+#define MMCI0_DMA { 0x84, 0 }
+#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
+#define KMI0_DMA { 0, 0 }
+#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
+#define KMI1_DMA { 0, 0 }
+#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
+#define PBX_SMC_DMA { 0, 0 }
+#define MPMC_IRQ { NO_IRQ, NO_IRQ }
+#define MPMC_DMA { 0, 0 }
+#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
+#define PBX_CLCD_DMA { 0, 0 }
+#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
+#define DMAC_DMA { 0, 0 }
+#define SCTL_IRQ { NO_IRQ, NO_IRQ }
+#define SCTL_DMA { 0, 0 }
+#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
+#define PBX_WATCHDOG_DMA { 0, 0 }
+#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
+#define PBX_GPIO0_DMA { 0, 0 }
+#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
+#define GPIO1_DMA { 0, 0 }
+#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
+#define PBX_RTC_DMA { 0, 0 }
+#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
+#define SCI_DMA { 7, 6 }
+#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
+#define PBX_UART0_DMA { 15, 14 }
+#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
+#define PBX_UART1_DMA { 13, 12 }
+#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
+#define PBX_UART2_DMA { 11, 10 }
+#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
+#define PBX_UART3_DMA { 0x86, 0x87 }
+#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
+#define PBX_SSP_DMA { 9, 8 }
+
+/* FPGA Primecells */
+AMBA_DEVICE(aaci, "fpga:04", AACI, NULL);
+AMBA_DEVICE(mmc0, "fpga:05", MMCI0, &realview_mmc0_plat_data);
+AMBA_DEVICE(kmi0, "fpga:06", KMI0, NULL);
+AMBA_DEVICE(kmi1, "fpga:07", KMI1, NULL);
+AMBA_DEVICE(uart3, "fpga:09", PBX_UART3, NULL);
+
+/* DevChip Primecells */
+AMBA_DEVICE(smc, "dev:00", PBX_SMC, NULL);
+AMBA_DEVICE(sctl, "dev:e0", SCTL, NULL);
+AMBA_DEVICE(wdog, "dev:e1", PBX_WATCHDOG, NULL);
+AMBA_DEVICE(gpio0, "dev:e4", PBX_GPIO0, NULL);
+AMBA_DEVICE(gpio1, "dev:e5", GPIO1, NULL);
+AMBA_DEVICE(gpio2, "dev:e6", GPIO2, NULL);
+AMBA_DEVICE(rtc, "dev:e8", PBX_RTC, NULL);
+AMBA_DEVICE(sci0, "dev:f0", SCI, NULL);
+AMBA_DEVICE(uart0, "dev:f1", PBX_UART0, NULL);
+AMBA_DEVICE(uart1, "dev:f2", PBX_UART1, NULL);
+AMBA_DEVICE(uart2, "dev:f3", PBX_UART2, NULL);
+AMBA_DEVICE(ssp0, "dev:f4", PBX_SSP, NULL);
+
+/* Primecells on the NEC ISSP chip */
+AMBA_DEVICE(clcd, "issp:20", PBX_CLCD, &clcd_plat_data);
+AMBA_DEVICE(dmac, "issp:30", DMAC, NULL);
+
+static struct amba_device *amba_devs[] __initdata = {
+ &dmac_device,
+ &uart0_device,
+ &uart1_device,
+ &uart2_device,
+ &uart3_device,
+ &smc_device,
+ &clcd_device,
+ &sctl_device,
+ &wdog_device,
+ &gpio0_device,
+ &gpio1_device,
+ &gpio2_device,
+ &rtc_device,
+ &sci0_device,
+ &ssp0_device,
+ &aaci_device,
+ &mmc0_device,
+ &kmi0_device,
+ &kmi1_device,
+};
+
+/*
+ * RealView PB-X platform devices
+ */
+static struct resource realview_pbx_flash_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBX_FLASH0_BASE,
+ .end = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = REALVIEW_PBX_FLASH1_BASE,
+ .end = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource realview_pbx_smsc911x_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBX_ETH_BASE,
+ .end = REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PBX_ETH,
+ .end = IRQ_PBX_ETH,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource realview_pbx_isp1761_resources[] = {
+ [0] = {
+ .start = REALVIEW_PBX_USB_BASE,
+ .end = REALVIEW_PBX_USB_BASE + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_PBX_USB,
+ .end = IRQ_PBX_USB,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static void __init gic_init_irq(void)
+{
+ /* ARM PBX on-board GIC */
+ if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
+ gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
+ gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
+ 29);
+ gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
+ } else {
+ gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
+ gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
+ IRQ_PBX_GIC_START);
+ gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
+ }
+}
+
+static void __init realview_pbx_timer_init(void)
+{
+ timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
+ timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
+ timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
+ timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
+
+#ifdef CONFIG_LOCAL_TIMERS
+ if (core_tile_pbx11mp() || core_tile_pbxa9mp())
+ twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
+#endif
+ realview_timer_init(IRQ_PBX_TIMER0_1);
+}
+
+static struct sys_timer realview_pbx_timer = {
+ .init = realview_pbx_timer_init,
+};
+
+static void __init realview_pbx_init(void)
+{
+ int i;
+
+#ifdef CONFIG_CACHE_L2X0
+ if (core_tile_pbxa9mp()) {
+ void __iomem *l2x0_base =
+ __io_address(REALVIEW_PBX_TILE_L220_BASE);
+
+ /* set RAM latencies to 1 cycle for eASIC */
+ writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
+ writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
+
+ /* 16KB way size, 8-way associativity, parity disabled
+ * Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
+ l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
+ }
+#endif
+
+ realview_flash_register(realview_pbx_flash_resources,
+ ARRAY_SIZE(realview_pbx_flash_resources));
+ realview_eth_register(NULL, realview_pbx_smsc911x_resources);
+ platform_device_register(&realview_i2c_device);
+ platform_device_register(&realview_cf_device);
+ realview_usb_register(realview_pbx_isp1761_resources);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+
+#ifdef CONFIG_LEDS
+ leds_event = realview_leds_event;
+#endif
+}
+
+MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
+ /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
+ .phys_io = REALVIEW_PBX_UART0_BASE,
+ .io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
+ .boot_params = PHYS_OFFSET + 0x00000100,
+ .map_io = realview_pbx_map_io,
+ .init_irq = gic_init_irq,
+ .timer = &realview_pbx_timer,
+ .init_machine = realview_pbx_init,
+MACHINE_END
int s3c2400_gpio_getirq(unsigned int pin)
{
- if (pin < S3C2410_GPE0 || pin > S3C2400_GPE7_EINT7)
- return -1; /* not valid interrupts */
+ if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7))
+ return -EINVAL; /* not valid interrupts */
- return (pin - S3C2410_GPE0) + IRQ_EINT0;
+ return (pin - S3C2410_GPE(0)) + IRQ_EINT0;
}
EXPORT_SYMBOL(s3c2400_gpio_getirq);
bool "IPAQ H1940"
select CPU_S3C2410
select PM_H1940 if PM
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the HP IPAQ H1940
config MACH_N30
bool "Acer N30 family"
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you want suppt for the Acer N30, Acer N35,
Navman PiN570, Yakumo AlphaX or Airis NC05 PDAs.
select MACH_BAST_IDE
select S3C24XX_DCLK
select ISA
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics EB2410ITX
development board (also known as BAST)
config MACH_OTOM
bool "NexVision OTOM Board"
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision OTOM board
bool "AML M5900 Series"
select CPU_S3C2410
select PM_SIMTEC if PM
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the American Microsystems M5900 Series
<http://www.amltd.com>
config MACH_TCT_HAMMER
bool "TCT Hammer Board"
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the TinCanTools Hammer Board
<http://www.tincantools.com>
select SIMTEC_NOR
select MACH_BAST_IDE
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Thorcom VR1000 board.
config MACH_QT2410
bool "QT2410"
select CPU_S3C2410
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Armzone QT2410
#include <linux/sysdev.h>
#include <linux/serial_core.h>
+#include <mach/map.h>
#include <mach/dma.h>
#include <plat/cpu.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
unsigned long flags;
unsigned long val;
- if (pin < S3C2410_GPG8 || pin > S3C2410_GPG15)
- return -1;
+ if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15))
+ return -EINVAL;
config &= 0xff;
- pin -= S3C2410_GPG8;
+ pin -= S3C2410_GPG(8);
reg += pin & ~3;
local_irq_save(flags);
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
+
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <mach/h1940-latch.h>
h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
/* Reset the chip */
mdelay(10);
- s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
- s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
state = 1;
}
led_trigger_event(bt_led_trigger, 0);
#endif
- s3c2410_gpio_setpin(S3C2410_GPH1, 1);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
mdelay(10);
- s3c2410_gpio_setpin(S3C2410_GPH1, 0);
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
mdelay(10);
h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
static int __init h1940bt_probe(struct platform_device *pdev)
{
/* Configures BT serial port GPIOs */
- s3c2410_gpio_cfgpin(S3C2410_GPH0, S3C2410_GPH0_nCTS0);
- s3c2410_gpio_pullup(S3C2410_GPH0, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
- s3c2410_gpio_pullup(S3C2410_GPH1, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
- s3c2410_gpio_pullup(S3C2410_GPH2, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH3, S3C2410_GPH3_RXD0);
- s3c2410_gpio_pullup(S3C2410_GPH3, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
+ s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_pullup(S3C2410_GPH(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH(2), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
+ s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
#ifdef CONFIG_LEDS_H1940
led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
* Copyright (C) 2003,2004,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C241XX DMA support
+ * Samsung S3C24XX DMA support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
+#include <plat/dma.h>
#include <linux/sysdev.h>
-#include <mach/hardware.h>
#define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */
/* we have 4 dma channels */
#ifndef CONFIG_CPU_S3C2443
-#define S3C2410_DMA_CHANNELS (4)
+#define S3C_DMA_CHANNELS (4)
#else
-#define S3C2410_DMA_CHANNELS (6)
+#define S3C_DMA_CHANNELS (6)
#endif
/* types */
S3C2410_DMA_PAUSED
};
-
/* enum s3c2410_dma_loadst
*
* This represents the state of the DMA engine, wrt to the loaded / running
S3C2410_DMALOAD_1LOADED_1RUNNING,
};
-enum s3c2410_dma_buffresult {
- S3C2410_RES_OK,
- S3C2410_RES_ERR,
- S3C2410_RES_ABORT
-};
-
-enum s3c2410_dmasrc {
- S3C2410_DMASRC_HW, /* source is memory */
- S3C2410_DMASRC_MEM /* source is hardware */
-};
-
-/* enum s3c2410_chan_op
- *
- * operation codes passed to the DMA code by the user, and also used
- * to inform the current channel owner of any changes to the system state
-*/
-
-enum s3c2410_chan_op {
- S3C2410_DMAOP_START,
- S3C2410_DMAOP_STOP,
- S3C2410_DMAOP_PAUSE,
- S3C2410_DMAOP_RESUME,
- S3C2410_DMAOP_FLUSH,
- S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
- S3C2410_DMAOP_STARTED, /* indicate channel started */
-};
/* flags */
/* dma buffer */
-struct s3c2410_dma_client {
- char *name;
-};
+struct s3c2410_dma_buf;
-/* s3c2410_dma_buf_s
+/* s3c2410_dma_buf
*
* internally used buffer structure to describe a queued or running
* buffer.
*/
-struct s3c2410_dma_buf;
struct s3c2410_dma_buf {
struct s3c2410_dma_buf *next;
int magic; /* magic */
/* [1] is this updated for both recv/send modes? */
-struct s3c2410_dma_chan;
-
-/* s3c2410_dma_cbfn_t
- *
- * buffer callback routine type
-*/
-
-typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
- void *buf, int size,
- enum s3c2410_dma_buffresult result);
-
-typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
- enum s3c2410_chan_op );
-
struct s3c2410_dma_stats {
unsigned long loads;
unsigned long timeout_longest;
/* channel configuration */
enum s3c2410_dmasrc source;
+ enum dma_ch req_ch;
unsigned long dev_addr;
unsigned long load_timeout;
unsigned int flags; /* channel flags */
- unsigned int hw_cfg; /* last hw config */
struct s3c24xx_dma_map *map; /* channel hw maps */
struct sys_device dev;
};
-/* the currently allocated channel information */
-extern struct s3c2410_dma_chan s3c2410_chans[];
-
-/* note, we don't really use dma_device_t at the moment */
typedef unsigned long dma_device_t;
-/* functions --------------------------------------------------------------- */
-
-/* s3c2410_dma_request
- *
- * request a dma channel exclusivley
-*/
-
-extern int s3c2410_dma_request(unsigned int channel,
- struct s3c2410_dma_client *, void *dev);
-
-
-/* s3c2410_dma_ctrl
- *
- * change the state of the dma channel
-*/
-
-extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
-
-/* s3c2410_dma_setflags
- *
- * set the channel's flags to a given state
-*/
-
-extern int s3c2410_dma_setflags(unsigned int channel,
- unsigned int flags);
-
-/* s3c2410_dma_free
- *
- * free the dma channel (will also abort any outstanding operations)
-*/
-
-extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
-
-/* s3c2410_dma_enqueue
- *
- * place the given buffer onto the queue of operations for the channel.
- * The buffer must be allocated from dma coherent memory, or the Dcache/WB
- * drained before the buffer is given to the DMA system.
-*/
-
-extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
- dma_addr_t data, int size);
-
-/* s3c2410_dma_config
- *
- * configure the dma channel
-*/
-
-extern int s3c2410_dma_config(unsigned int channel, int xferunit, int dcon);
-
-/* s3c2410_dma_devconfig
- *
- * configure the device we're talking to
-*/
-
-extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
- int hwcfg, unsigned long devaddr);
-
-/* s3c2410_dma_getposition
- *
- * get the position that the dma transfer is currently at
-*/
-
-extern int s3c2410_dma_getposition(unsigned int channel,
- dma_addr_t *src, dma_addr_t *dest);
-
-extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
-extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
-
-/* DMA Register definitions */
-
-#define S3C2410_DMA_DISRC (0x00)
-#define S3C2410_DMA_DISRCC (0x04)
-#define S3C2410_DMA_DIDST (0x08)
-#define S3C2410_DMA_DIDSTC (0x0C)
-#define S3C2410_DMA_DCON (0x10)
-#define S3C2410_DMA_DSTAT (0x14)
-#define S3C2410_DMA_DCSRC (0x18)
-#define S3C2410_DMA_DCDST (0x1C)
-#define S3C2410_DMA_DMASKTRIG (0x20)
-#define S3C2412_DMA_DMAREQSEL (0x24)
-#define S3C2443_DMA_DMAREQSEL (0x24)
-
-#define S3C2410_DISRCC_INC (1<<0)
-#define S3C2410_DISRCC_APB (1<<1)
-
-#define S3C2410_DMASKTRIG_STOP (1<<2)
-#define S3C2410_DMASKTRIG_ON (1<<1)
-#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
-
-#define S3C2410_DCON_DEMAND (0<<31)
-#define S3C2410_DCON_HANDSHAKE (1<<31)
-#define S3C2410_DCON_SYNC_PCLK (0<<30)
-#define S3C2410_DCON_SYNC_HCLK (1<<30)
-
-#define S3C2410_DCON_INTREQ (1<<29)
-
-#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
-#define S3C2410_DCON_CH0_UART0 (1<<24)
-#define S3C2410_DCON_CH0_SDI (2<<24)
-#define S3C2410_DCON_CH0_TIMER (3<<24)
-#define S3C2410_DCON_CH0_USBEP1 (4<<24)
-
-#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
-#define S3C2410_DCON_CH1_UART1 (1<<24)
-#define S3C2410_DCON_CH1_I2SSDI (2<<24)
-#define S3C2410_DCON_CH1_SPI (3<<24)
-#define S3C2410_DCON_CH1_USBEP2 (4<<24)
-
-#define S3C2410_DCON_CH2_I2SSDO (0<<24)
-#define S3C2410_DCON_CH2_I2SSDI (1<<24)
-#define S3C2410_DCON_CH2_SDI (2<<24)
-#define S3C2410_DCON_CH2_TIMER (3<<24)
-#define S3C2410_DCON_CH2_USBEP3 (4<<24)
-
-#define S3C2410_DCON_CH3_UART2 (0<<24)
-#define S3C2410_DCON_CH3_SDI (1<<24)
-#define S3C2410_DCON_CH3_SPI (2<<24)
-#define S3C2410_DCON_CH3_TIMER (3<<24)
-#define S3C2410_DCON_CH3_USBEP4 (4<<24)
-
-#define S3C2410_DCON_SRCSHIFT (24)
-#define S3C2410_DCON_SRCMASK (7<<24)
-
-#define S3C2410_DCON_BYTE (0<<20)
-#define S3C2410_DCON_HALFWORD (1<<20)
-#define S3C2410_DCON_WORD (2<<20)
-
-#define S3C2410_DCON_AUTORELOAD (0<<22)
-#define S3C2410_DCON_NORELOAD (1<<22)
-#define S3C2410_DCON_HWTRIG (1<<23)
-
-#ifdef CONFIG_CPU_S3C2440
-#define S3C2440_DIDSTC_CHKINT (1<<2)
-
-#define S3C2440_DCON_CH0_I2SSDO (5<<24)
-#define S3C2440_DCON_CH0_PCMIN (6<<24)
-
-#define S3C2440_DCON_CH1_PCMOUT (5<<24)
-#define S3C2440_DCON_CH1_SDI (6<<24)
-
-#define S3C2440_DCON_CH2_PCMIN (5<<24)
-#define S3C2440_DCON_CH2_MICIN (6<<24)
-
-#define S3C2440_DCON_CH3_MICIN (5<<24)
-#define S3C2440_DCON_CH3_PCMOUT (6<<24)
-#endif
-
-#ifdef CONFIG_CPU_S3C2412
-
-#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2412_DMAREQSEL_HW (1)
-
-#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
-#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
-#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
-#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
-#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
-#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
-#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
-#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
-#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
-#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
-#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
-#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
-#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
-#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
-#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
-#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
-#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
-#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
-#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
-#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
-
-#endif
-
-#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
-
-#define S3C2443_DMAREQSEL_HW (1)
-
-#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
-#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
-#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
-#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
-#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
-#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
-#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
-#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
-#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
-#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
-#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
-#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
-#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
-#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
-#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
-#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
-#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
-#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
-#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
-#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
-#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
-
#endif /* __ASM_ARCH_DMA_H */
{
struct s3c_gpio_chip *chip;
- if (pin > S3C2410_GPG10)
+ if (pin > S3C2410_GPG(10))
return NULL;
chip = &s3c24xx_gpios[pin/32];
--- /dev/null
+/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+ *
+ * Copyright (c) 2003,2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - hardware
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* These functions are in the to-be-removed category and it is strongly
+ * encouraged not to use these in new code. They will be marked deprecated
+ * very soon.
+ *
+ * Most of the functionality can be either replaced by the gpiocfg calls
+ * for the s3c platform or by the generic GPIOlib API.
+*/
+
+/* external functions for GPIO support
+ *
+ * These allow various different clients to access the same GPIO
+ * registers without conflicting. If your driver only owns the entire
+ * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
+*/
+
+/* s3c2410_gpio_cfgpin
+ *
+ * set the configuration of the given pin to the value passed.
+ *
+ * eg:
+ * s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0);
+ * s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1);
+*/
+
+extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
+
+extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
+
+/* s3c2410_gpio_getirq
+ *
+ * turn the given pin number into the corresponding IRQ number
+ *
+ * returns:
+ * < 0 = no interrupt for this pin
+ * >=0 = interrupt number for the pin
+*/
+
+extern int s3c2410_gpio_getirq(unsigned int pin);
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern int s3c2400_gpio_getirq(unsigned int pin);
+
+#endif /* CONFIG_CPU_S3C2400 */
+
+/* s3c2410_gpio_irqfilter
+ *
+ * set the irq filtering on the given pin
+ *
+ * on = 0 => disable filtering
+ * 1 => enable filtering
+ *
+ * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
+ * width of filter (0 through 63)
+ *
+ *
+*/
+
+extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
+ unsigned int config);
+
+/* s3c2410_gpio_pullup
+ *
+ * configure the pull-up control on the given pin
+ *
+ * to = 1 => disable the pull-up
+ * 0 => enable the pull-up
+ *
+ * eg;
+ *
+ * s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+ * s3c2410_gpio_pullup(S3C2410_GPE(8), 0);
+*/
+
+extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
+
+/* s3c2410_gpio_getpull
+ *
+ * Read the state of the pull-up on a given pin
+ *
+ * return:
+ * < 0 => error code
+ * 0 => enabled
+ * 1 => disabled
+*/
+
+extern int s3c2410_gpio_getpull(unsigned int pin);
+
+extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
+
+extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
* published by the Free Software Foundation.
*/
+#ifndef __MACH_GPIONRS_H
+#define __MACH_GPIONRS_H
+
#define S3C2410_GPIONO(bank,offset) ((bank) + (offset))
#define S3C2410_GPIO_BANKA (32*0)
#define S3C2410_GPIO_BANKF (32*5)
#define S3C2410_GPIO_BANKG (32*6)
#define S3C2410_GPIO_BANKH (32*7)
+
+/* GPIO bank sizes */
+#define S3C2410_GPIO_A_NR (32)
+#define S3C2410_GPIO_B_NR (32)
+#define S3C2410_GPIO_C_NR (32)
+#define S3C2410_GPIO_D_NR (32)
+#define S3C2410_GPIO_E_NR (32)
+#define S3C2410_GPIO_F_NR (32)
+#define S3C2410_GPIO_G_NR (32)
+#define S3C2410_GPIO_H_NR (32)
+
+#if CONFIG_S3C_GPIO_SPACE != 0
+#error CONFIG_S3C_GPIO_SPACE cannot be zero at the moment
+#endif
+
+#define S3C2410_GPIO_NEXT(__gpio) \
+ ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 0)
+
+#ifndef __ASSEMBLY__
+
+enum s3c_gpio_number {
+ S3C2410_GPIO_A_START = 0,
+ S3C2410_GPIO_B_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_A),
+ S3C2410_GPIO_C_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_B),
+ S3C2410_GPIO_D_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_C),
+ S3C2410_GPIO_E_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_D),
+ S3C2410_GPIO_F_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_E),
+ S3C2410_GPIO_G_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_F),
+ S3C2410_GPIO_H_START = S3C2410_GPIO_NEXT(S3C2410_GPIO_G),
+};
+
+#endif /* __ASSEMBLY__ */
+
+/* S3C2410 GPIO number definitions. */
+
+#define S3C2410_GPA(_nr) (S3C2410_GPIO_A_START + (_nr))
+#define S3C2410_GPB(_nr) (S3C2410_GPIO_B_START + (_nr))
+#define S3C2410_GPC(_nr) (S3C2410_GPIO_C_START + (_nr))
+#define S3C2410_GPD(_nr) (S3C2410_GPIO_D_START + (_nr))
+#define S3C2410_GPE(_nr) (S3C2410_GPIO_E_START + (_nr))
+#define S3C2410_GPF(_nr) (S3C2410_GPIO_F_START + (_nr))
+#define S3C2410_GPG(_nr) (S3C2410_GPIO_G_START + (_nr))
+#define S3C2410_GPH(_nr) (S3C2410_GPIO_H_START + (_nr))
+
+/* compatibility until drivers can be modified */
+
+#define S3C2410_GPA0 S3C2410_GPA(0)
+#define S3C2410_GPA1 S3C2410_GPA(1)
+#define S3C2410_GPA3 S3C2410_GPA(3)
+#define S3C2410_GPA7 S3C2410_GPA(7)
+
+#define S3C2410_GPE0 S3C2410_GPE(0)
+#define S3C2410_GPE1 S3C2410_GPE(1)
+#define S3C2410_GPE2 S3C2410_GPE(2)
+#define S3C2410_GPE3 S3C2410_GPE(3)
+#define S3C2410_GPE4 S3C2410_GPE(4)
+#define S3C2410_GPE5 S3C2410_GPE(5)
+#define S3C2410_GPE6 S3C2410_GPE(6)
+#define S3C2410_GPE7 S3C2410_GPE(7)
+#define S3C2410_GPE8 S3C2410_GPE(8)
+#define S3C2410_GPE9 S3C2410_GPE(9)
+#define S3C2410_GPE10 S3C2410_GPE(10)
+
+#define S3C2410_GPH10 S3C2410_GPH(10)
+
+#endif /* __MACH_GPIONRS_H */
+
#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
#ifndef __ASSEMBLY__
-/* external functions for GPIO support
- *
- * These allow various different clients to access the same GPIO
- * registers without conflicting. If your driver only owns the entire
- * GPIO register, then it is safe to ioremap/__raw_{read|write} to it.
-*/
-
-/* s3c2410_gpio_cfgpin
- *
- * set the configuration of the given pin to the value passed.
- *
- * eg:
- * s3c2410_gpio_cfgpin(S3C2410_GPA0, S3C2410_GPA0_ADDR0);
- * s3c2410_gpio_cfgpin(S3C2410_GPE8, S3C2410_GPE8_SDDAT1);
-*/
-
-extern void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function);
-
-extern unsigned int s3c2410_gpio_getcfg(unsigned int pin);
-
-/* s3c2410_gpio_getirq
- *
- * turn the given pin number into the corresponding IRQ number
- *
- * returns:
- * < 0 = no interrupt for this pin
- * >=0 = interrupt number for the pin
-*/
-
-extern int s3c2410_gpio_getirq(unsigned int pin);
-
-/* s3c2410_gpio_irq2pin
- *
- * turn the given irq number into the corresponding GPIO number
- *
- * returns:
- * < 0 = no pin
- * >=0 = gpio pin number
-*/
-
-extern int s3c2410_gpio_irq2pin(unsigned int irq);
-
-#ifdef CONFIG_CPU_S3C2400
-
-extern int s3c2400_gpio_getirq(unsigned int pin);
-
-#endif /* CONFIG_CPU_S3C2400 */
-
-/* s3c2410_gpio_irqfilter
- *
- * set the irq filtering on the given pin
- *
- * on = 0 => disable filtering
- * 1 => enable filtering
- *
- * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with
- * width of filter (0 through 63)
- *
- *
-*/
-
-extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on,
- unsigned int config);
-
-/* s3c2410_gpio_pullup
- *
- * configure the pull-up control on the given pin
- *
- * to = 1 => disable the pull-up
- * 0 => enable the pull-up
- *
- * eg;
- *
- * s3c2410_gpio_pullup(S3C2410_GPB0, 0);
- * s3c2410_gpio_pullup(S3C2410_GPE8, 0);
-*/
-
-extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to);
-
-/* s3c2410_gpio_getpull
- *
- * Read the state of the pull-up on a given pin
- *
- * return:
- * < 0 => error code
- * 0 => enabled
- * 1 => disabled
-*/
-
-extern int s3c2410_gpio_getpull(unsigned int pin);
-
-extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to);
-
-extern unsigned int s3c2410_gpio_getpin(unsigned int pin);
-
extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
#ifdef CONFIG_CPU_S3C2440
#define S3C24XX_PA_IRQ S3C2410_PA_IRQ
#define S3C24XX_PA_MEMCTRL S3C2410_PA_MEMCTRL
-#define S3C24XX_PA_USBHOST S3C2410_PA_USBHOST
#define S3C24XX_PA_DMA S3C2410_PA_DMA
#define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR
#define S3C24XX_PA_LCD S3C2410_PA_LCD
#define S3C_PA_IIC S3C2410_PA_IIC
#define S3C_PA_UART S3C24XX_PA_UART
+#define S3C_PA_USBHOST S3C2410_PA_USBHOST
#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC
#endif /* __ASM_ARCH_MAP_H */
#define S3C2400_GPACON S3C2410_GPIOREG(0x00)
#define S3C2400_GPADAT S3C2410_GPIOREG(0x04)
-#define S3C2410_GPA0 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 0)
-#define S3C2410_GPA0_OUT (0<<0)
#define S3C2410_GPA0_ADDR0 (1<<0)
-#define S3C2410_GPA1 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 1)
-#define S3C2410_GPA1_OUT (0<<1)
#define S3C2410_GPA1_ADDR16 (1<<1)
-#define S3C2410_GPA2 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 2)
-#define S3C2410_GPA2_OUT (0<<2)
#define S3C2410_GPA2_ADDR17 (1<<2)
-#define S3C2410_GPA3 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 3)
-#define S3C2410_GPA3_OUT (0<<3)
#define S3C2410_GPA3_ADDR18 (1<<3)
-#define S3C2410_GPA4 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 4)
-#define S3C2410_GPA4_OUT (0<<4)
#define S3C2410_GPA4_ADDR19 (1<<4)
-#define S3C2410_GPA5 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 5)
-#define S3C2410_GPA5_OUT (0<<5)
#define S3C2410_GPA5_ADDR20 (1<<5)
-#define S3C2410_GPA6 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 6)
-#define S3C2410_GPA6_OUT (0<<6)
#define S3C2410_GPA6_ADDR21 (1<<6)
-#define S3C2410_GPA7 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 7)
-#define S3C2410_GPA7_OUT (0<<7)
#define S3C2410_GPA7_ADDR22 (1<<7)
-#define S3C2410_GPA8 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 8)
-#define S3C2410_GPA8_OUT (0<<8)
#define S3C2410_GPA8_ADDR23 (1<<8)
-#define S3C2410_GPA9 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 9)
-#define S3C2410_GPA9_OUT (0<<9)
#define S3C2410_GPA9_ADDR24 (1<<9)
-#define S3C2410_GPA10 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 10)
-#define S3C2410_GPA10_OUT (0<<10)
#define S3C2410_GPA10_ADDR25 (1<<10)
#define S3C2400_GPA10_SCKE (1<<10)
-#define S3C2410_GPA11 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 11)
-#define S3C2410_GPA11_OUT (0<<11)
#define S3C2410_GPA11_ADDR26 (1<<11)
#define S3C2400_GPA11_nCAS0 (1<<11)
-#define S3C2410_GPA12 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 12)
-#define S3C2410_GPA12_OUT (0<<12)
#define S3C2410_GPA12_nGCS1 (1<<12)
#define S3C2400_GPA12_nCAS1 (1<<12)
-#define S3C2410_GPA13 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 13)
-#define S3C2410_GPA13_OUT (0<<13)
#define S3C2410_GPA13_nGCS2 (1<<13)
#define S3C2400_GPA13_nGCS1 (1<<13)
-#define S3C2410_GPA14 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 14)
-#define S3C2410_GPA14_OUT (0<<14)
#define S3C2410_GPA14_nGCS3 (1<<14)
#define S3C2400_GPA14_nGCS2 (1<<14)
-#define S3C2410_GPA15 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 15)
-#define S3C2410_GPA15_OUT (0<<15)
#define S3C2410_GPA15_nGCS4 (1<<15)
#define S3C2400_GPA15_nGCS3 (1<<15)
-#define S3C2410_GPA16 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 16)
-#define S3C2410_GPA16_OUT (0<<16)
#define S3C2410_GPA16_nGCS5 (1<<16)
#define S3C2400_GPA16_nGCS4 (1<<16)
-#define S3C2410_GPA17 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 17)
-#define S3C2410_GPA17_OUT (0<<17)
#define S3C2410_GPA17_CLE (1<<17)
#define S3C2400_GPA17_nGCS5 (1<<17)
-#define S3C2410_GPA18 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 18)
-#define S3C2410_GPA18_OUT (0<<18)
#define S3C2410_GPA18_ALE (1<<18)
-#define S3C2410_GPA19 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 19)
-#define S3C2410_GPA19_OUT (0<<19)
#define S3C2410_GPA19_nFWE (1<<19)
-#define S3C2410_GPA20 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 20)
-#define S3C2410_GPA20_OUT (0<<20)
#define S3C2410_GPA20_nFRE (1<<20)
-#define S3C2410_GPA21 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 21)
-#define S3C2410_GPA21_OUT (0<<21)
#define S3C2410_GPA21_nRSTOUT (1<<21)
-#define S3C2410_GPA22 S3C2410_GPIONO(S3C2410_GPIO_BANKA, 22)
-#define S3C2410_GPA22_OUT (0<<22)
#define S3C2410_GPA22_nFCE (1<<22)
/* 0x08 and 0x0c are reserved on S3C2410 */
/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
-#define S3C2410_GPB0 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
-#define S3C2410_GPB0_INP (0x00 << 0)
-#define S3C2410_GPB0_OUTP (0x01 << 0)
#define S3C2410_GPB0_TOUT0 (0x02 << 0)
#define S3C2400_GPB0_DATA16 (0x02 << 0)
-#define S3C2410_GPB1 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 1)
-#define S3C2410_GPB1_INP (0x00 << 2)
-#define S3C2410_GPB1_OUTP (0x01 << 2)
#define S3C2410_GPB1_TOUT1 (0x02 << 2)
#define S3C2400_GPB1_DATA17 (0x02 << 2)
-#define S3C2410_GPB2 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 2)
-#define S3C2410_GPB2_INP (0x00 << 4)
-#define S3C2410_GPB2_OUTP (0x01 << 4)
#define S3C2410_GPB2_TOUT2 (0x02 << 4)
#define S3C2400_GPB2_DATA18 (0x02 << 4)
#define S3C2400_GPB2_TCLK1 (0x03 << 4)
-#define S3C2410_GPB3 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 3)
-#define S3C2410_GPB3_INP (0x00 << 6)
-#define S3C2410_GPB3_OUTP (0x01 << 6)
#define S3C2410_GPB3_TOUT3 (0x02 << 6)
#define S3C2400_GPB3_DATA19 (0x02 << 6)
#define S3C2400_GPB3_TXD1 (0x03 << 6)
-#define S3C2410_GPB4 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 4)
-#define S3C2410_GPB4_INP (0x00 << 8)
-#define S3C2410_GPB4_OUTP (0x01 << 8)
#define S3C2410_GPB4_TCLK0 (0x02 << 8)
#define S3C2400_GPB4_DATA20 (0x02 << 8)
#define S3C2410_GPB4_MASK (0x03 << 8)
#define S3C2400_GPB4_RXD1 (0x03 << 8)
#define S3C2400_GPB4_MASK (0x03 << 8)
-#define S3C2410_GPB5 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 5)
-#define S3C2410_GPB5_INP (0x00 << 10)
-#define S3C2410_GPB5_OUTP (0x01 << 10)
#define S3C2410_GPB5_nXBACK (0x02 << 10)
#define S3C2443_GPB5_XBACK (0x03 << 10)
#define S3C2400_GPB5_DATA21 (0x02 << 10)
#define S3C2400_GPB5_nCTS1 (0x03 << 10)
-#define S3C2410_GPB6 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 6)
-#define S3C2410_GPB6_INP (0x00 << 12)
-#define S3C2410_GPB6_OUTP (0x01 << 12)
#define S3C2410_GPB6_nXBREQ (0x02 << 12)
#define S3C2443_GPB6_XBREQ (0x03 << 12)
#define S3C2400_GPB6_DATA22 (0x02 << 12)
#define S3C2400_GPB6_nRTS1 (0x03 << 12)
-#define S3C2410_GPB7 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 7)
-#define S3C2410_GPB7_INP (0x00 << 14)
-#define S3C2410_GPB7_OUTP (0x01 << 14)
#define S3C2410_GPB7_nXDACK1 (0x02 << 14)
#define S3C2443_GPB7_XDACK1 (0x03 << 14)
#define S3C2400_GPB7_DATA23 (0x02 << 14)
-#define S3C2410_GPB8 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
-#define S3C2410_GPB8_INP (0x00 << 16)
-#define S3C2410_GPB8_OUTP (0x01 << 16)
#define S3C2410_GPB8_nXDREQ1 (0x02 << 16)
#define S3C2400_GPB8_DATA24 (0x02 << 16)
-#define S3C2410_GPB9 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 9)
-#define S3C2410_GPB9_INP (0x00 << 18)
-#define S3C2410_GPB9_OUTP (0x01 << 18)
#define S3C2410_GPB9_nXDACK0 (0x02 << 18)
#define S3C2443_GPB9_XDACK0 (0x03 << 18)
#define S3C2400_GPB9_DATA25 (0x02 << 18)
#define S3C2400_GPB9_I2SSDI (0x03 << 18)
-#define S3C2410_GPB10 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 10)
-#define S3C2410_GPB10_INP (0x00 << 20)
-#define S3C2410_GPB10_OUTP (0x01 << 20)
#define S3C2410_GPB10_nXDRE0 (0x02 << 20)
#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
#define S3C2400_GPB10_DATA26 (0x02 << 20)
#define S3C2400_GPB10_nSS (0x03 << 20)
-#define S3C2400_GPB11 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 11)
#define S3C2400_GPB11_INP (0x00 << 22)
#define S3C2400_GPB11_OUTP (0x01 << 22)
#define S3C2400_GPB11_DATA27 (0x02 << 22)
-#define S3C2400_GPB12 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 12)
#define S3C2400_GPB12_INP (0x00 << 24)
#define S3C2400_GPB12_OUTP (0x01 << 24)
#define S3C2400_GPB12_DATA28 (0x02 << 24)
-#define S3C2400_GPB13 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 13)
#define S3C2400_GPB13_INP (0x00 << 26)
#define S3C2400_GPB13_OUTP (0x01 << 26)
#define S3C2400_GPB13_DATA29 (0x02 << 26)
-#define S3C2400_GPB14 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 14)
#define S3C2400_GPB14_INP (0x00 << 28)
#define S3C2400_GPB14_OUTP (0x01 << 28)
#define S3C2400_GPB14_DATA30 (0x02 << 28)
-#define S3C2400_GPB15 S3C2410_GPIONO(S3C2410_GPIO_BANKB, 15)
#define S3C2400_GPB15_INP (0x00 << 30)
#define S3C2400_GPB15_OUTP (0x01 << 30)
#define S3C2400_GPB15_DATA31 (0x02 << 30)
#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18)
#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C)
-#define S3C2410_GPC0 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 0)
-#define S3C2410_GPC0_INP (0x00 << 0)
-#define S3C2410_GPC0_OUTP (0x01 << 0)
#define S3C2410_GPC0_LEND (0x02 << 0)
#define S3C2400_GPC0_VD0 (0x02 << 0)
-#define S3C2410_GPC1 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 1)
-#define S3C2410_GPC1_INP (0x00 << 2)
-#define S3C2410_GPC1_OUTP (0x01 << 2)
#define S3C2410_GPC1_VCLK (0x02 << 2)
#define S3C2400_GPC1_VD1 (0x02 << 2)
-#define S3C2410_GPC2 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 2)
-#define S3C2410_GPC2_INP (0x00 << 4)
-#define S3C2410_GPC2_OUTP (0x01 << 4)
#define S3C2410_GPC2_VLINE (0x02 << 4)
#define S3C2400_GPC2_VD2 (0x02 << 4)
-#define S3C2410_GPC3 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 3)
-#define S3C2410_GPC3_INP (0x00 << 6)
-#define S3C2410_GPC3_OUTP (0x01 << 6)
#define S3C2410_GPC3_VFRAME (0x02 << 6)
#define S3C2400_GPC3_VD3 (0x02 << 6)
-#define S3C2410_GPC4 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 4)
-#define S3C2410_GPC4_INP (0x00 << 8)
-#define S3C2410_GPC4_OUTP (0x01 << 8)
#define S3C2410_GPC4_VM (0x02 << 8)
#define S3C2400_GPC4_VD4 (0x02 << 8)
-#define S3C2410_GPC5 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 5)
-#define S3C2410_GPC5_INP (0x00 << 10)
-#define S3C2410_GPC5_OUTP (0x01 << 10)
#define S3C2410_GPC5_LCDVF0 (0x02 << 10)
#define S3C2400_GPC5_VD5 (0x02 << 10)
-#define S3C2410_GPC6 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 6)
-#define S3C2410_GPC6_INP (0x00 << 12)
-#define S3C2410_GPC6_OUTP (0x01 << 12)
#define S3C2410_GPC6_LCDVF1 (0x02 << 12)
#define S3C2400_GPC6_VD6 (0x02 << 12)
-#define S3C2410_GPC7 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 7)
-#define S3C2410_GPC7_INP (0x00 << 14)
-#define S3C2410_GPC7_OUTP (0x01 << 14)
#define S3C2410_GPC7_LCDVF2 (0x02 << 14)
#define S3C2400_GPC7_VD7 (0x02 << 14)
-#define S3C2410_GPC8 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 8)
-#define S3C2410_GPC8_INP (0x00 << 16)
-#define S3C2410_GPC8_OUTP (0x01 << 16)
#define S3C2410_GPC8_VD0 (0x02 << 16)
#define S3C2400_GPC8_VD8 (0x02 << 16)
-#define S3C2410_GPC9 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 9)
-#define S3C2410_GPC9_INP (0x00 << 18)
-#define S3C2410_GPC9_OUTP (0x01 << 18)
#define S3C2410_GPC9_VD1 (0x02 << 18)
#define S3C2400_GPC9_VD9 (0x02 << 18)
-#define S3C2410_GPC10 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 10)
-#define S3C2410_GPC10_INP (0x00 << 20)
-#define S3C2410_GPC10_OUTP (0x01 << 20)
#define S3C2410_GPC10_VD2 (0x02 << 20)
#define S3C2400_GPC10_VD10 (0x02 << 20)
-#define S3C2410_GPC11 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 11)
-#define S3C2410_GPC11_INP (0x00 << 22)
-#define S3C2410_GPC11_OUTP (0x01 << 22)
#define S3C2410_GPC11_VD3 (0x02 << 22)
#define S3C2400_GPC11_VD11 (0x02 << 22)
-#define S3C2410_GPC12 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 12)
-#define S3C2410_GPC12_INP (0x00 << 24)
-#define S3C2410_GPC12_OUTP (0x01 << 24)
#define S3C2410_GPC12_VD4 (0x02 << 24)
#define S3C2400_GPC12_VD12 (0x02 << 24)
-#define S3C2410_GPC13 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 13)
-#define S3C2410_GPC13_INP (0x00 << 26)
-#define S3C2410_GPC13_OUTP (0x01 << 26)
#define S3C2410_GPC13_VD5 (0x02 << 26)
#define S3C2400_GPC13_VD13 (0x02 << 26)
-#define S3C2410_GPC14 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 14)
-#define S3C2410_GPC14_INP (0x00 << 28)
-#define S3C2410_GPC14_OUTP (0x01 << 28)
#define S3C2410_GPC14_VD6 (0x02 << 28)
#define S3C2400_GPC14_VD14 (0x02 << 28)
-#define S3C2410_GPC15 S3C2410_GPIONO(S3C2410_GPIO_BANKC, 15)
-#define S3C2410_GPC15_INP (0x00 << 30)
-#define S3C2410_GPC15_OUTP (0x01 << 30)
#define S3C2410_GPC15_VD7 (0x02 << 30)
#define S3C2400_GPC15_VD15 (0x02 << 30)
#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24)
#define S3C2400_GPDUP S3C2410_GPIOREG(0x28)
-#define S3C2410_GPD0 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 0)
-#define S3C2410_GPD0_INP (0x00 << 0)
-#define S3C2410_GPD0_OUTP (0x01 << 0)
#define S3C2410_GPD0_VD8 (0x02 << 0)
#define S3C2400_GPD0_VFRAME (0x02 << 0)
#define S3C2442_GPD0_nSPICS1 (0x03 << 0)
-#define S3C2410_GPD1 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 1)
-#define S3C2410_GPD1_INP (0x00 << 2)
-#define S3C2410_GPD1_OUTP (0x01 << 2)
#define S3C2410_GPD1_VD9 (0x02 << 2)
#define S3C2400_GPD1_VM (0x02 << 2)
#define S3C2442_GPD1_SPICLK1 (0x03 << 2)
-#define S3C2410_GPD2 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 2)
-#define S3C2410_GPD2_INP (0x00 << 4)
-#define S3C2410_GPD2_OUTP (0x01 << 4)
#define S3C2410_GPD2_VD10 (0x02 << 4)
#define S3C2400_GPD2_VLINE (0x02 << 4)
-#define S3C2410_GPD3 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 3)
-#define S3C2410_GPD3_INP (0x00 << 6)
-#define S3C2410_GPD3_OUTP (0x01 << 6)
#define S3C2410_GPD3_VD11 (0x02 << 6)
#define S3C2400_GPD3_VCLK (0x02 << 6)
-#define S3C2410_GPD4 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 4)
-#define S3C2410_GPD4_INP (0x00 << 8)
-#define S3C2410_GPD4_OUTP (0x01 << 8)
#define S3C2410_GPD4_VD12 (0x02 << 8)
#define S3C2400_GPD4_LEND (0x02 << 8)
-#define S3C2410_GPD5 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 5)
-#define S3C2410_GPD5_INP (0x00 << 10)
-#define S3C2410_GPD5_OUTP (0x01 << 10)
#define S3C2410_GPD5_VD13 (0x02 << 10)
#define S3C2400_GPD5_TOUT0 (0x02 << 10)
-#define S3C2410_GPD6 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 6)
-#define S3C2410_GPD6_INP (0x00 << 12)
-#define S3C2410_GPD6_OUTP (0x01 << 12)
#define S3C2410_GPD6_VD14 (0x02 << 12)
#define S3C2400_GPD6_TOUT1 (0x02 << 12)
-#define S3C2410_GPD7 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 7)
-#define S3C2410_GPD7_INP (0x00 << 14)
-#define S3C2410_GPD7_OUTP (0x01 << 14)
#define S3C2410_GPD7_VD15 (0x02 << 14)
#define S3C2400_GPD7_TOUT2 (0x02 << 14)
-#define S3C2410_GPD8 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 8)
-#define S3C2410_GPD8_INP (0x00 << 16)
-#define S3C2410_GPD8_OUTP (0x01 << 16)
#define S3C2410_GPD8_VD16 (0x02 << 16)
#define S3C2400_GPD8_TOUT3 (0x02 << 16)
-#define S3C2410_GPD9 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 9)
-#define S3C2410_GPD9_INP (0x00 << 18)
-#define S3C2410_GPD9_OUTP (0x01 << 18)
#define S3C2410_GPD9_VD17 (0x02 << 18)
#define S3C2400_GPD9_TCLK0 (0x02 << 18)
#define S3C2410_GPD9_MASK (0x03 << 18)
-#define S3C2410_GPD10 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 10)
-#define S3C2410_GPD10_INP (0x00 << 20)
-#define S3C2410_GPD10_OUTP (0x01 << 20)
#define S3C2410_GPD10_VD18 (0x02 << 20)
#define S3C2400_GPD10_nWAIT (0x02 << 20)
-#define S3C2410_GPD11 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 11)
-#define S3C2410_GPD11_INP (0x00 << 22)
-#define S3C2410_GPD11_OUTP (0x01 << 22)
#define S3C2410_GPD11_VD19 (0x02 << 22)
-#define S3C2410_GPD12 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 12)
-#define S3C2410_GPD12_INP (0x00 << 24)
-#define S3C2410_GPD12_OUTP (0x01 << 24)
#define S3C2410_GPD12_VD20 (0x02 << 24)
-#define S3C2410_GPD13 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 13)
-#define S3C2410_GPD13_INP (0x00 << 26)
-#define S3C2410_GPD13_OUTP (0x01 << 26)
#define S3C2410_GPD13_VD21 (0x02 << 26)
-#define S3C2410_GPD14 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 14)
-#define S3C2410_GPD14_INP (0x00 << 28)
-#define S3C2410_GPD14_OUTP (0x01 << 28)
#define S3C2410_GPD14_VD22 (0x02 << 28)
#define S3C2410_GPD14_nSS1 (0x03 << 28)
-#define S3C2410_GPD15 S3C2410_GPIONO(S3C2410_GPIO_BANKD, 15)
-#define S3C2410_GPD15_INP (0x00 << 30)
-#define S3C2410_GPD15_OUTP (0x01 << 30)
#define S3C2410_GPD15_VD23 (0x02 << 30)
#define S3C2410_GPD15_nSS0 (0x03 << 30)
#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30)
#define S3C2400_GPEUP S3C2410_GPIOREG(0x34)
-#define S3C2410_GPE0 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 0)
-#define S3C2410_GPE0_INP (0x00 << 0)
-#define S3C2410_GPE0_OUTP (0x01 << 0)
#define S3C2410_GPE0_I2SLRCK (0x02 << 0)
#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
#define S3C2400_GPE0_EINT0 (0x02 << 0)
#define S3C2410_GPE0_MASK (0x03 << 0)
-#define S3C2410_GPE1 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 1)
-#define S3C2410_GPE1_INP (0x00 << 2)
-#define S3C2410_GPE1_OUTP (0x01 << 2)
#define S3C2410_GPE1_I2SSCLK (0x02 << 2)
#define S3C2443_GPE1_AC_SYNC (0x03 << 2)
#define S3C2400_GPE1_EINT1 (0x02 << 2)
#define S3C2400_GPE1_nSS (0x03 << 2)
#define S3C2410_GPE1_MASK (0x03 << 2)
-#define S3C2410_GPE2 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 2)
-#define S3C2410_GPE2_INP (0x00 << 4)
-#define S3C2410_GPE2_OUTP (0x01 << 4)
#define S3C2410_GPE2_CDCLK (0x02 << 4)
#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
#define S3C2400_GPE2_EINT2 (0x02 << 4)
#define S3C2400_GPE2_I2SSDI (0x03 << 4)
-#define S3C2410_GPE3 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 3)
-#define S3C2410_GPE3_INP (0x00 << 6)
-#define S3C2410_GPE3_OUTP (0x01 << 6)
#define S3C2410_GPE3_I2SSDI (0x02 << 6)
#define S3C2443_GPE3_AC_SDI (0x03 << 6)
#define S3C2400_GPE3_EINT3 (0x02 << 6)
#define S3C2410_GPE3_nSS0 (0x03 << 6)
#define S3C2410_GPE3_MASK (0x03 << 6)
-#define S3C2410_GPE4 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 4)
-#define S3C2410_GPE4_INP (0x00 << 8)
-#define S3C2410_GPE4_OUTP (0x01 << 8)
#define S3C2410_GPE4_I2SSDO (0x02 << 8)
#define S3C2443_GPE4_AC_SDO (0x03 << 8)
#define S3C2400_GPE4_EINT4 (0x02 << 8)
#define S3C2410_GPE4_I2SSDI (0x03 << 8)
#define S3C2410_GPE4_MASK (0x03 << 8)
-#define S3C2410_GPE5 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 5)
-#define S3C2410_GPE5_INP (0x00 << 10)
-#define S3C2410_GPE5_OUTP (0x01 << 10)
#define S3C2410_GPE5_SDCLK (0x02 << 10)
#define S3C2443_GPE5_SD1_CLK (0x02 << 10)
#define S3C2400_GPE5_EINT5 (0x02 << 10)
#define S3C2400_GPE5_TCLK1 (0x03 << 10)
-#define S3C2410_GPE6 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 6)
-#define S3C2410_GPE6_INP (0x00 << 12)
-#define S3C2410_GPE6_OUTP (0x01 << 12)
#define S3C2410_GPE6_SDCMD (0x02 << 12)
#define S3C2443_GPE6_SD1_CMD (0x02 << 12)
#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
#define S3C2400_GPE6_EINT6 (0x02 << 12)
-#define S3C2410_GPE7 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
-#define S3C2410_GPE7_INP (0x00 << 14)
-#define S3C2410_GPE7_OUTP (0x01 << 14)
#define S3C2410_GPE7_SDDAT0 (0x02 << 14)
#define S3C2443_GPE5_SD1_DAT0 (0x02 << 14)
#define S3C2443_GPE7_AC_SDI (0x03 << 14)
#define S3C2400_GPE7_EINT7 (0x02 << 14)
-#define S3C2410_GPE8 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
-#define S3C2410_GPE8_INP (0x00 << 16)
-#define S3C2410_GPE8_OUTP (0x01 << 16)
#define S3C2410_GPE8_SDDAT1 (0x02 << 16)
#define S3C2443_GPE8_SD1_DAT1 (0x02 << 16)
#define S3C2443_GPE8_AC_SDO (0x03 << 16)
#define S3C2400_GPE8_nXDACK0 (0x02 << 16)
-#define S3C2410_GPE9 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
-#define S3C2410_GPE9_INP (0x00 << 18)
-#define S3C2410_GPE9_OUTP (0x01 << 18)
#define S3C2410_GPE9_SDDAT2 (0x02 << 18)
#define S3C2443_GPE9_SD1_DAT2 (0x02 << 18)
#define S3C2443_GPE9_AC_SYNC (0x03 << 18)
#define S3C2400_GPE9_nXDACK1 (0x02 << 18)
#define S3C2400_GPE9_nXBACK (0x03 << 18)
-#define S3C2410_GPE10 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 10)
-#define S3C2410_GPE10_INP (0x00 << 20)
-#define S3C2410_GPE10_OUTP (0x01 << 20)
#define S3C2410_GPE10_SDDAT3 (0x02 << 20)
#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
#define S3C2400_GPE10_nXDREQ0 (0x02 << 20)
-#define S3C2410_GPE11 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
-#define S3C2410_GPE11_INP (0x00 << 22)
-#define S3C2410_GPE11_OUTP (0x01 << 22)
#define S3C2410_GPE11_SPIMISO0 (0x02 << 22)
#define S3C2400_GPE11_nXDREQ1 (0x02 << 22)
#define S3C2400_GPE11_nXBREQ (0x03 << 22)
-#define S3C2410_GPE12 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 12)
-#define S3C2410_GPE12_INP (0x00 << 24)
-#define S3C2410_GPE12_OUTP (0x01 << 24)
#define S3C2410_GPE12_SPIMOSI0 (0x02 << 24)
-#define S3C2410_GPE13 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 13)
-#define S3C2410_GPE13_INP (0x00 << 26)
-#define S3C2410_GPE13_OUTP (0x01 << 26)
#define S3C2410_GPE13_SPICLK0 (0x02 << 26)
-#define S3C2410_GPE14 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 14)
-#define S3C2410_GPE14_INP (0x00 << 28)
-#define S3C2410_GPE14_OUTP (0x01 << 28)
#define S3C2410_GPE14_IICSCL (0x02 << 28)
#define S3C2410_GPE14_MASK (0x03 << 28)
-#define S3C2410_GPE15 S3C2410_GPIONO(S3C2410_GPIO_BANKE, 15)
-#define S3C2410_GPE15_INP (0x00 << 30)
-#define S3C2410_GPE15_OUTP (0x01 << 30)
#define S3C2410_GPE15_IICSDA (0x02 << 30)
#define S3C2410_GPE15_MASK (0x03 << 30)
#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C)
#define S3C2400_GPFUP S3C2410_GPIOREG(0x40)
-#define S3C2410_GPF0 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 0)
-#define S3C2410_GPF0_INP (0x00 << 0)
-#define S3C2410_GPF0_OUTP (0x01 << 0)
#define S3C2410_GPF0_EINT0 (0x02 << 0)
#define S3C2400_GPF0_RXD0 (0x02 << 0)
-#define S3C2410_GPF1 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 1)
-#define S3C2410_GPF1_INP (0x00 << 2)
-#define S3C2410_GPF1_OUTP (0x01 << 2)
#define S3C2410_GPF1_EINT1 (0x02 << 2)
#define S3C2400_GPF1_RXD1 (0x02 << 2)
#define S3C2400_GPF1_IICSDA (0x03 << 2)
-#define S3C2410_GPF2 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 2)
-#define S3C2410_GPF2_INP (0x00 << 4)
-#define S3C2410_GPF2_OUTP (0x01 << 4)
#define S3C2410_GPF2_EINT2 (0x02 << 4)
#define S3C2400_GPF2_TXD0 (0x02 << 4)
-#define S3C2410_GPF3 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 3)
-#define S3C2410_GPF3_INP (0x00 << 6)
-#define S3C2410_GPF3_OUTP (0x01 << 6)
#define S3C2410_GPF3_EINT3 (0x02 << 6)
#define S3C2400_GPF3_TXD1 (0x02 << 6)
#define S3C2400_GPF3_IICSCL (0x03 << 6)
-#define S3C2410_GPF4 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 4)
-#define S3C2410_GPF4_INP (0x00 << 8)
-#define S3C2410_GPF4_OUTP (0x01 << 8)
#define S3C2410_GPF4_EINT4 (0x02 << 8)
#define S3C2400_GPF4_nRTS0 (0x02 << 8)
#define S3C2400_GPF4_nXBACK (0x03 << 8)
-#define S3C2410_GPF5 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 5)
-#define S3C2410_GPF5_INP (0x00 << 10)
-#define S3C2410_GPF5_OUTP (0x01 << 10)
#define S3C2410_GPF5_EINT5 (0x02 << 10)
#define S3C2400_GPF5_nCTS0 (0x02 << 10)
#define S3C2400_GPF5_nXBREQ (0x03 << 10)
-#define S3C2410_GPF6 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 6)
-#define S3C2410_GPF6_INP (0x00 << 12)
-#define S3C2410_GPF6_OUTP (0x01 << 12)
#define S3C2410_GPF6_EINT6 (0x02 << 12)
#define S3C2400_GPF6_CLKOUT (0x02 << 12)
-#define S3C2410_GPF7 S3C2410_GPIONO(S3C2410_GPIO_BANKF, 7)
-#define S3C2410_GPF7_INP (0x00 << 14)
-#define S3C2410_GPF7_OUTP (0x01 << 14)
#define S3C2410_GPF7_EINT7 (0x02 << 14)
#define S3C2410_GPF_PUPDIS(x) (1<<(x))
#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48)
#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C)
-#define S3C2410_GPG0 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 0)
-#define S3C2410_GPG0_INP (0x00 << 0)
-#define S3C2410_GPG0_OUTP (0x01 << 0)
#define S3C2410_GPG0_EINT8 (0x02 << 0)
#define S3C2400_GPG0_I2SLRCK (0x02 << 0)
-#define S3C2410_GPG1 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 1)
-#define S3C2410_GPG1_INP (0x00 << 2)
-#define S3C2410_GPG1_OUTP (0x01 << 2)
#define S3C2410_GPG1_EINT9 (0x02 << 2)
#define S3C2400_GPG1_I2SSCLK (0x02 << 2)
-#define S3C2410_GPG2 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 2)
-#define S3C2410_GPG2_INP (0x00 << 4)
-#define S3C2410_GPG2_OUTP (0x01 << 4)
#define S3C2410_GPG2_EINT10 (0x02 << 4)
#define S3C2410_GPG2_nSS0 (0x03 << 4)
#define S3C2400_GPG2_CDCLK (0x02 << 4)
-#define S3C2410_GPG3 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 3)
-#define S3C2410_GPG3_INP (0x00 << 6)
-#define S3C2410_GPG3_OUTP (0x01 << 6)
#define S3C2410_GPG3_EINT11 (0x02 << 6)
#define S3C2410_GPG3_nSS1 (0x03 << 6)
#define S3C2400_GPG3_I2SSDO (0x02 << 6)
#define S3C2400_GPG3_I2SSDI (0x03 << 6)
-#define S3C2410_GPG4 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 4)
-#define S3C2410_GPG4_INP (0x00 << 8)
-#define S3C2410_GPG4_OUTP (0x01 << 8)
#define S3C2410_GPG4_EINT12 (0x02 << 8)
#define S3C2400_GPG4_MMCCLK (0x02 << 8)
#define S3C2400_GPG4_I2SSDI (0x03 << 8)
#define S3C2410_GPG4_LCDPWREN (0x03 << 8)
#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
-#define S3C2410_GPG5 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
-#define S3C2410_GPG5_INP (0x00 << 10)
-#define S3C2410_GPG5_OUTP (0x01 << 10)
#define S3C2410_GPG5_EINT13 (0x02 << 10)
#define S3C2400_GPG5_MMCCMD (0x02 << 10)
#define S3C2400_GPG5_IICSDA (0x03 << 10)
#define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */
-#define S3C2410_GPG6 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
-#define S3C2410_GPG6_INP (0x00 << 12)
-#define S3C2410_GPG6_OUTP (0x01 << 12)
#define S3C2410_GPG6_EINT14 (0x02 << 12)
#define S3C2400_GPG6_MMCDAT (0x02 << 12)
#define S3C2400_GPG6_IICSCL (0x03 << 12)
#define S3C2410_GPG6_SPIMOSI1 (0x03 << 12)
-#define S3C2410_GPG7 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 7)
-#define S3C2410_GPG7_INP (0x00 << 14)
-#define S3C2410_GPG7_OUTP (0x01 << 14)
#define S3C2410_GPG7_EINT15 (0x02 << 14)
#define S3C2410_GPG7_SPICLK1 (0x03 << 14)
#define S3C2400_GPG7_SPIMISO (0x02 << 14)
#define S3C2400_GPG7_IICSDA (0x03 << 14)
-#define S3C2410_GPG8 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 8)
-#define S3C2410_GPG8_INP (0x00 << 16)
-#define S3C2410_GPG8_OUTP (0x01 << 16)
#define S3C2410_GPG8_EINT16 (0x02 << 16)
#define S3C2400_GPG8_SPIMOSI (0x02 << 16)
#define S3C2400_GPG8_IICSCL (0x03 << 16)
-#define S3C2410_GPG9 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 9)
-#define S3C2410_GPG9_INP (0x00 << 18)
-#define S3C2410_GPG9_OUTP (0x01 << 18)
#define S3C2410_GPG9_EINT17 (0x02 << 18)
#define S3C2400_GPG9_SPICLK (0x02 << 18)
#define S3C2400_GPG9_MMCCLK (0x03 << 18)
-#define S3C2410_GPG10 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 10)
-#define S3C2410_GPG10_INP (0x00 << 20)
-#define S3C2410_GPG10_OUTP (0x01 << 20)
#define S3C2410_GPG10_EINT18 (0x02 << 20)
-#define S3C2410_GPG11 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 11)
-#define S3C2410_GPG11_INP (0x00 << 22)
-#define S3C2410_GPG11_OUTP (0x01 << 22)
#define S3C2410_GPG11_EINT19 (0x02 << 22)
#define S3C2410_GPG11_TCLK1 (0x03 << 22)
#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
-#define S3C2410_GPG12 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
-#define S3C2410_GPG12_INP (0x00 << 24)
-#define S3C2410_GPG12_OUTP (0x01 << 24)
#define S3C2410_GPG12_EINT20 (0x02 << 24)
#define S3C2410_GPG12_XMON (0x03 << 24)
#define S3C2442_GPG12_nSPICS0 (0x03 << 24)
#define S3C2443_GPG12_nINPACK (0x03 << 24)
-#define S3C2410_GPG13 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
-#define S3C2410_GPG13_INP (0x00 << 26)
-#define S3C2410_GPG13_OUTP (0x01 << 26)
#define S3C2410_GPG13_EINT21 (0x02 << 26)
#define S3C2410_GPG13_nXPON (0x03 << 26)
#define S3C2443_GPG13_CF_nREG (0x03 << 26)
-#define S3C2410_GPG14 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
-#define S3C2410_GPG14_INP (0x00 << 28)
-#define S3C2410_GPG14_OUTP (0x01 << 28)
#define S3C2410_GPG14_EINT22 (0x02 << 28)
#define S3C2410_GPG14_YMON (0x03 << 28)
#define S3C2443_GPG14_CF_RESET (0x03 << 28)
-#define S3C2410_GPG15 S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
-#define S3C2410_GPG15_INP (0x00 << 30)
-#define S3C2410_GPG15_OUTP (0x01 << 30)
#define S3C2410_GPG15_EINT23 (0x02 << 30)
#define S3C2410_GPG15_nYPON (0x03 << 30)
#define S3C2443_GPG15_CF_PWR (0x03 << 30)
#define S3C2410_GPHDAT S3C2410_GPIOREG(0x74)
#define S3C2410_GPHUP S3C2410_GPIOREG(0x78)
-#define S3C2410_GPH0 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 0)
-#define S3C2410_GPH0_INP (0x00 << 0)
-#define S3C2410_GPH0_OUTP (0x01 << 0)
#define S3C2410_GPH0_nCTS0 (0x02 << 0)
-#define S3C2410_GPH1 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 1)
-#define S3C2410_GPH1_INP (0x00 << 2)
-#define S3C2410_GPH1_OUTP (0x01 << 2)
#define S3C2410_GPH1_nRTS0 (0x02 << 2)
-#define S3C2410_GPH2 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 2)
-#define S3C2410_GPH2_INP (0x00 << 4)
-#define S3C2410_GPH2_OUTP (0x01 << 4)
#define S3C2410_GPH2_TXD0 (0x02 << 4)
-#define S3C2410_GPH3 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 3)
-#define S3C2410_GPH3_INP (0x00 << 6)
-#define S3C2410_GPH3_OUTP (0x01 << 6)
#define S3C2410_GPH3_RXD0 (0x02 << 6)
-#define S3C2410_GPH4 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 4)
-#define S3C2410_GPH4_INP (0x00 << 8)
-#define S3C2410_GPH4_OUTP (0x01 << 8)
#define S3C2410_GPH4_TXD1 (0x02 << 8)
-#define S3C2410_GPH5 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 5)
-#define S3C2410_GPH5_INP (0x00 << 10)
-#define S3C2410_GPH5_OUTP (0x01 << 10)
#define S3C2410_GPH5_RXD1 (0x02 << 10)
-#define S3C2410_GPH6 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 6)
-#define S3C2410_GPH6_INP (0x00 << 12)
-#define S3C2410_GPH6_OUTP (0x01 << 12)
#define S3C2410_GPH6_TXD2 (0x02 << 12)
#define S3C2410_GPH6_nRTS1 (0x03 << 12)
-#define S3C2410_GPH7 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 7)
-#define S3C2410_GPH7_INP (0x00 << 14)
-#define S3C2410_GPH7_OUTP (0x01 << 14)
#define S3C2410_GPH7_RXD2 (0x02 << 14)
#define S3C2410_GPH7_nCTS1 (0x03 << 14)
-#define S3C2410_GPH8 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 8)
-#define S3C2410_GPH8_INP (0x00 << 16)
-#define S3C2410_GPH8_OUTP (0x01 << 16)
#define S3C2410_GPH8_UCLK (0x02 << 16)
-#define S3C2410_GPH9 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 9)
-#define S3C2410_GPH9_INP (0x00 << 18)
-#define S3C2410_GPH9_OUTP (0x01 << 18)
#define S3C2410_GPH9_CLKOUT0 (0x02 << 18)
#define S3C2442_GPH9_nSPICS0 (0x03 << 18)
-#define S3C2410_GPH10 S3C2410_GPIONO(S3C2410_GPIO_BANKH, 10)
-#define S3C2410_GPH10_INP (0x00 << 20)
-#define S3C2410_GPH10_OUTP (0x01 << 20)
#define S3C2410_GPH10_CLKOUT1 (0x02 << 20)
/* The S3C2412 and S3C2413 move the GPJ register set to after
*/
#include <mach/hardware.h>
-#include <linux/io.h>
-
-#include <plat/regs-watchdog.h>
-#include <mach/regs-clock.h>
-
-#include <linux/clk.h>
-#include <linux/err.h>
+#include <plat/watchdog-reset.h>
extern void (*s3c24xx_reset_hook)(void);
static void
arch_reset(char mode, const char *cmd)
{
- struct clk *wdtclk;
-
if (mode == 's') {
cpu_reset(0);
}
if (s3c24xx_reset_hook)
s3c24xx_reset_hook();
- printk("arch_reset: attempting watchdog reset\n");
-
- __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
-
- wdtclk = clk_get(NULL, "watchdog");
- if (!IS_ERR(wdtclk)) {
- clk_enable(wdtclk);
- } else
- printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
-
- /* put initial values into count and data */
- __raw_writel(0x80, S3C2410_WTCNT);
- __raw_writel(0x80, S3C2410_WTDAT);
-
- /* set the watchdog to go and reset... */
- __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
- S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
-
- /* wait for reset to assert... */
- mdelay(500);
-
- printk(KERN_ERR "Watchdog reset failed to assert reset\n");
-
- /* delay to allow the serial port to show the message */
- mdelay(50);
+ arch_wdt_reset();
/* we'll take a jump through zero as a poor second */
cpu_reset(0);
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/proc_fs.h>
} else {
enable_irq_wake(IRQ_EINT9);
/* configure the suspend/resume status pin */
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP);
- s3c2410_gpio_pullup(S3C2410_GPF2, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_pullup(S3C2410_GPF(2), 0);
}
}
static void __init amlm5900_init(void)
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
static int bast_pm_suspend(struct sys_device *sd, pm_message_t state)
{
/* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA21, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+ s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
static int bast_pm_resume(struct sys_device *sd)
{
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
-
- usb_simtec_init();
}
static void __init bast_init(void)
i2c_register_board_info(0, bast_i2c_devs,
ARRAY_SIZE(bast_i2c_devs));
+ usb_simtec_init();
nor_simtec_init();
}
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
.udc_command = h1940_udc_pullup,
- .vbus_pin = S3C2410_GPG5,
+ .vbus_pin = S3C2410_GPG(5),
.vbus_pin_inverted = 1,
};
#include <linux/gpio_keys.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/input.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
{
switch (cmd) {
case S3C2410_UDC_P_ENABLE :
- s3c2410_gpio_setpin(S3C2410_GPB3, 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(3), 1);
break;
case S3C2410_UDC_P_DISABLE :
- s3c2410_gpio_setpin(S3C2410_GPB3, 0);
+ s3c2410_gpio_setpin(S3C2410_GPB(3), 0);
break;
case S3C2410_UDC_P_RESET :
break;
static struct s3c2410_udc_mach_info n30_udc_cfg __initdata = {
.udc_command = n30_udc_pullup,
- .vbus_pin = S3C2410_GPG1,
+ .vbus_pin = S3C2410_GPG(1),
.vbus_pin_inverted = 0,
};
static struct gpio_keys_button n30_buttons[] = {
{
- .gpio = S3C2410_GPF0,
+ .gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG9,
+ .gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Thumbwheel Up",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG8,
+ .gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Thumbwheel Down",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG7,
+ .gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Thumbwheel Press",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF7,
+ .gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF6,
+ .gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF5,
+ .gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF4,
+ .gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
static struct gpio_keys_button n35_buttons[] = {
{
- .gpio = S3C2410_GPF0,
+ .gpio = S3C2410_GPF(0),
.code = KEY_POWER,
.desc = "Power",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG9,
+ .gpio = S3C2410_GPG(9),
.code = KEY_UP,
.desc = "Joystick Up",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG8,
+ .gpio = S3C2410_GPG(8),
.code = KEY_DOWN,
.desc = "Joystick Down",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG6,
+ .gpio = S3C2410_GPG(6),
.code = KEY_DOWN,
.desc = "Joystick Left",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG5,
+ .gpio = S3C2410_GPG(5),
.code = KEY_DOWN,
.desc = "Joystick Right",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG7,
+ .gpio = S3C2410_GPG(7),
.code = KEY_ENTER,
.desc = "Joystick Press",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF7,
+ .gpio = S3C2410_GPF(7),
.code = KEY_HOMEPAGE,
.desc = "Home",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF6,
+ .gpio = S3C2410_GPF(6),
.code = KEY_CALENDAR,
.desc = "Calendar",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF5,
+ .gpio = S3C2410_GPF(5),
.code = KEY_ADDRESSBOOK,
.desc = "Contacts",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF4,
+ .gpio = S3C2410_GPF(4),
.code = KEY_MAIL,
.desc = "Mail",
.active_low = 0,
},
{
- .gpio = S3C2410_GPF3,
+ .gpio = S3C2410_GPF(3),
.code = SW_RADIO,
.desc = "GPS Antenna",
.active_low = 0,
},
{
- .gpio = S3C2410_GPG2,
+ .gpio = S3C2410_GPG(2),
.code = SW_HEADPHONE_INSERT,
.desc = "Headphone",
.active_low = 0,
/* This is the bluetooth LED on the device. */
static struct s3c24xx_led_platdata n30_blue_led_pdata = {
.name = "blue_led",
- .gpio = S3C2410_GPG6,
+ .gpio = S3C2410_GPG(6),
.def_trigger = "",
};
static struct s3c24xx_led_platdata n30_warning_led_pdata = {
.name = "warning_led",
.flags = S3C24XX_LEDF_ACTLOW,
- .gpio = S3C2410_GPD9,
+ .gpio = S3C2410_GPD(9),
.def_trigger = "",
};
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
/* LED */
static struct s3c24xx_led_platdata qt2410_pdata_led = {
- .gpio = S3C2410_GPB0,
+ .gpio = S3C2410_GPB(0),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led",
.def_trigger = "timer",
{
switch (cs) {
case BITBANG_CS_ACTIVE:
- s3c2410_gpio_setpin(S3C2410_GPB5, 0);
+ s3c2410_gpio_setpin(S3C2410_GPB(5), 0);
break;
case BITBANG_CS_INACTIVE:
- s3c2410_gpio_setpin(S3C2410_GPB5, 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(5), 1);
break;
}
}
static struct s3c2410_spigpio_info spi_gpio_cfg = {
- .pin_clk = S3C2410_GPG7,
- .pin_mosi = S3C2410_GPG6,
- .pin_miso = S3C2410_GPG5,
+ .pin_clk = S3C2410_GPG(7),
+ .pin_mosi = S3C2410_GPG(6),
+ .pin_miso = S3C2410_GPG(5),
.chip_select = &spi_gpio_cs,
};
}
s3c24xx_fb_set_platdata(&qt2410_fb_info);
- s3c2410_gpio_cfgpin(S3C2410_GPB0, S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB0, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(0), 1);
s3c24xx_udc_set_platdata(&qt2410_udc_cfg);
s3c_i2c0_set_platdata(NULL);
- s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(5), S3C2410_GPIO_OUTPUT);
platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
s3c_pm_init();
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/dm9000.h>
#include <linux/i2c.h>
static struct s3c24xx_led_platdata vr1000_led1_pdata = {
.name = "led1",
- .gpio = S3C2410_GPB0,
+ .gpio = S3C2410_GPB(0),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led2_pdata = {
.name = "led2",
- .gpio = S3C2410_GPB1,
+ .gpio = S3C2410_GPB(1),
.def_trigger = "",
};
static struct s3c24xx_led_platdata vr1000_led3_pdata = {
.name = "led3",
- .gpio = S3C2410_GPB2,
+ .gpio = S3C2410_GPB(2),
.def_trigger = "",
};
static void vr1000_power_off(void)
{
- s3c2410_gpio_cfgpin(S3C2410_GPB9, S3C2410_GPB9_OUTP);
- s3c2410_gpio_setpin(S3C2410_GPB9, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(9), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(9), 1);
}
static void __init vr1000_map_io(void)
#include <linux/errno.h>
#include <linux/time.h>
#include <linux/sysdev.h>
+#include <linux/gpio.h>
#include <linux/io.h>
#include <mach/hardware.h>
}
if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
}
__raw_writel(tmp, S3C2410_GSTATUS2);
if ( machine_is_aml_m5900() )
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
return 0;
}
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
+#include <linux/gpio.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/device.h>
+#include <linux/gpio.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <mach/bast-map.h>
#include <mach/bast-irq.h>
-#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <asm/irq.h>
power_state[port] = to;
if (power_state[0] && power_state[1])
- s3c2410_gpio_setpin(S3C2410_GPB4, 0);
+ gpio_set_value(S3C2410_GPB(4), 0);
else
- s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+ gpio_set_value(S3C2410_GPB(4), 1);
}
static irqreturn_t
{
struct s3c2410_hcd_info *info = pw;
- if (s3c2410_gpio_getpin(S3C2410_GPG10) == 0) {
+ if (gpio_get_value(S3C2410_GPG(10)) == 0) {
pr_debug("usb_simtec: over-current irq (oc detected)\n");
s3c2410_usb_report_oc(info, 3);
} else {
int usb_simtec_init(void)
{
+ int ret;
+
printk("USB Power Control, (c) 2004 Simtec Electronics\n");
- s3c_device_usb.dev.platform_data = &usb_simtec_info;
- s3c2410_gpio_cfgpin(S3C2410_GPB4, S3C2410_GPB4_OUTP);
- s3c2410_gpio_setpin(S3C2410_GPB4, 1);
+ ret = gpio_request(S3C2410_GPB(4), "USB power control");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPB4\n", __func__);
+ return ret;
+ }
+
+ ret = gpio_request(S3C2410_GPG(10), "USB overcurrent");
+ if (ret < 0) {
+ pr_err("%s: failed to get GPG10\n", __func__);
+ gpio_free(S3C2410_GPB(4));
+ return ret;
+ }
+
+ /* turn power on */
+ gpio_direction_output(S3C2410_GPB(4), 1);
+ gpio_direction_input(S3C2410_GPG(10));
+
+ s3c_device_usb.dev.platform_data = &usb_simtec_info;
return 0;
}
config MACH_JIVE
bool "Logitech Jive"
select CPU_S3C2412
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Logitech Jive.
select CPU_S3C2412
select MACH_S3C2413
select MACH_SMDK
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an SMDK2413
config MACH_VSTMS
bool "VMSTMS"
select CPU_S3C2412
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using an VSTMS board
#include <mach/dma.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
{
printk(KERN_DEBUG "%s(%d)\n", __func__, set);
- s3c2410_gpio_setpin(S3C2410_GPG13, set);
- s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(13), set);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
}
#undef LCD_UPPER_MARGIN
static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
- s3c2410_gpio_setpin(S3C2410_GPB7, cs ? 0 : 1);
+ s3c2410_gpio_setpin(S3C2410_GPB(7), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_lcd_spi = {
.bus_num = 1,
- .pin_clk = S3C2410_GPG8,
- .pin_mosi = S3C2410_GPB8,
+ .pin_clk = S3C2410_GPG(8),
+ .pin_mosi = S3C2410_GPB(8),
.num_chipselect = 1,
.chip_select = jive_lcd_spi_chipselect,
};
static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs)
{
- s3c2410_gpio_setpin(S3C2410_GPH10, cs ? 0 : 1);
+ s3c2410_gpio_setpin(S3C2410_GPH(10), cs ? 0 : 1);
}
static struct s3c2410_spigpio_info jive_wm8750_spi = {
.bus_num = 2,
- .pin_clk = S3C2410_GPB4,
- .pin_mosi = S3C2410_GPB9,
+ .pin_clk = S3C2410_GPB(4),
+ .pin_mosi = S3C2410_GPB(9),
.num_chipselect = 1,
.chip_select = jive_wm8750_chipselect,
};
};
static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = {
- .vbus_pin = S3C2410_GPG1, /* detect is on GPG1 */
+ .vbus_pin = S3C2410_GPG(1), /* detect is on GPG1 */
};
/* Jive power management device */
{
printk(KERN_INFO "powering system down...\n");
- s3c2410_gpio_setpin(S3C2410_GPC5, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPC5, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPC(5), S3C2410_GPIO_OUTPUT);
}
static void __init jive_machine_init(void)
/* initialise the spi */
- s3c2410_gpio_setpin(S3C2410_GPG13, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPG13, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(13), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB7, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPB7, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(7), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(7), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPB6, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPB6, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPB(6), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPB(6), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPG8, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPG8, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPG(8), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(8), S3C2410_GPIO_OUTPUT);
/* initialise the WM8750 spi */
- s3c2410_gpio_setpin(S3C2410_GPH10, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPH10, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPH(10), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(10), S3C2410_GPIO_OUTPUT);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
switch (cmd)
{
case S3C2410_UDC_P_ENABLE :
- s3c2410_gpio_setpin(S3C2410_GPF2, 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 1);
break;
case S3C2410_UDC_P_DISABLE :
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
break;
case S3C2410_UDC_P_RESET :
break;
{ /* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT);
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
select PM_SIMTEC if PM
select HAVE_PATA_PLATFORM
select S3C24XX_GPIO_EXTRA64
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec Electronics ANUBIS
development system
select S3C24XX_DCLK
select PM_SIMTEC if PM
select S3C24XX_GPIO_EXTRA128
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
bool "SMDK2440"
select CPU_S3C2440
select MACH_SMDK
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the SMDK2440.
config MACH_NEXCODER_2440
bool "NexVision NEXCODER 2440 Light Board"
select CPU_S3C2440
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
config MACH_AT2440EVB
bool "Avantech AT2440EVB development board"
select CPU_S3C2440
+ select S3C_DEV_USB_HOST
help
Say Y here if you are using the AT2440EVB development board
#include <linux/sysdev.h>
#include <linux/serial_core.h>
+#include <mach/map.h>
#include <mach/dma.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
anubis_nand_sets[0].nr_partitions = ARRAY_SIZE(anubis_default_nand_part_large);
} else {
/* ensure that the GPIO is setup */
- s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
}
};
static struct s3c24xx_mci_pdata at2440evb_mci_pdata = {
- .gpio_detect = S3C2410_GPG10,
+ .gpio_detect = S3C2410_GPG(10),
};
/* 7" LCD panel */
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/string.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
static void __init nexcoder_sensorboard_init(void)
{
// Initialize SCCB bus
- s3c2410_gpio_setpin(S3C2410_GPE14, 1); // IICSCL
- s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_OUTP);
- s3c2410_gpio_setpin(S3C2410_GPE15, 1); // IICSDA
- s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_OUTP);
+ s3c2410_gpio_setpin(S3C2410_GPE(14), 1); // IICSCL
+ s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPE(15), 1); // IICSDA
+ s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPIO_OUTPUT);
// Power up the sensor board
- s3c2410_gpio_setpin(S3C2410_GPF1, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPF1, S3C2410_GPF1_OUTP); // CAM_GPIO7 => nLDO_PWRDN
- s3c2410_gpio_setpin(S3C2410_GPF2, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPF2, S3C2410_GPF2_OUTP); // CAM_GPIO6 => CAM_PWRDN
+ s3c2410_gpio_setpin(S3C2410_GPF(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(1), S3C2410_GPIO_OUTPUT); // CAM_GPIO7 => nLDO_PWRDN
+ s3c2410_gpio_setpin(S3C2410_GPF(2), 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(2), S3C2410_GPIO_OUTPUT); // CAM_GPIO6 => CAM_PWRDN
}
static void __init nexcoder_map_io(void)
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/device.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
__raw_writeb(tmp, OSIRIS_VA_CTRL0);
/* ensure that an nRESET is not generated on resume. */
- s3c2410_gpio_setpin(S3C2410_GPA21, 1);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_OUT);
+ s3c2410_gpio_setpin(S3C2410_GPA(21), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPIO_OUTPUT);
return 0;
}
__raw_writeb(pm_osiris_ctrl0, OSIRIS_VA_CTRL0);
- s3c2410_gpio_cfgpin(S3C2410_GPA21, S3C2410_GPA21_nRSTOUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPA(21), S3C2410_GPA21_nRSTOUT);
return 0;
}
osiris_nand_sets[0].nr_partitions = ARRAY_SIZE(osiris_default_nand_part_large);
} else {
/* write-protect line to the NAND */
- s3c2410_gpio_setpin(S3C2410_GPA0, 1);
+ s3c2410_gpio_setpin(S3C2410_GPA(0), 1);
}
/* fix bus configuration (nBE settings wrong on ABLE pre v2.20) */
#include <mach/dma.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
#include <plat/cpu.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <plat/regs-ac97.h>
+#include <plat/regs-dma.h>
#include <mach/regs-mem.h>
#include <mach/regs-lcd.h>
#include <mach/regs-sdi.h>
#
# Licensed under GPLv2
-# Currently nothing here, this will be added later
+# Configuration options for the S3C6410 CPU
+
+config CPU_S3C6400
+ bool
+ select CPU_S3C6400_INIT
+ select CPU_S3C6400_CLOCK
+ help
+ Enable S3C6400 CPU support
+
+config S3C6400_SETUP_SDHCI
+ bool
+ help
+ Internal configuration for default SDHCI
+ setup for S3C6400.
+
+# S36400 Macchine support
+
+config MACH_SMDK6400
+ bool "SMDK6400"
+ select CPU_S3C6400
+ select S3C_DEV_HSMMC
+ select S3C6400_SETUP_SDHCI
+ help
+ Machine support for the Samsung SMDK6400
# Core support for S3C6400 system
-obj-n += blank.o
+obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
+
+# setup support
+
+obj-$(CONFIG_S3C6400_SETUP_SDHCI) += setup-sdhci.o
+
+# Machine support
+
+obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
#ifndef __ASM_ARCH_DMA_H
#define __ASM_ARCH_DMA_H __FILE__
-/* currently nothing here, placeholder */
+#define S3C_DMA_CHANNELS (16)
+
+/* see mach-s3c2410/dma.h for notes on dma channel numbers */
+
+/* Note, for the S3C64XX architecture we keep the DMACH_
+ * defines in the order they are allocated to [S]DMA0/[S]DMA1
+ * so that is easy to do DHACH_ -> DMA controller conversion
+ */
+enum dma_ch {
+ /* DMA0/SDMA0 */
+ DMACH_UART0 = 0,
+ DMACH_UART0_SRC2,
+ DMACH_UART1,
+ DMACH_UART1_SRC2,
+ DMACH_UART2,
+ DMACH_UART2_SRC2,
+ DMACH_UART3,
+ DMACH_UART3_SRC2,
+ DMACH_PCM0_TX,
+ DMACH_PCM0_RX,
+ DMACH_I2S0_OUT,
+ DMACH_I2S0_IN,
+ DMACH_SPI0_TX,
+ DMACH_SPI0_RX,
+ DMACH_HSI_I2SV40_TX,
+ DMACH_HSI_I2SV40_RX,
+
+ /* DMA1/SDMA1 */
+ DMACH_PCM1_TX = 16,
+ DMACH_PCM1_RX,
+ DMACH_I2S1_OUT,
+ DMACH_I2S1_IN,
+ DMACH_SPI1_TX,
+ DMACH_SPI1_RX,
+ DMACH_AC97_PCMOUT,
+ DMACH_AC97_PCMIN,
+ DMACH_AC97_MICIN,
+ DMACH_PWM,
+ DMACH_IRDA,
+ DMACH_EXTERNAL,
+ DMACH_RES1,
+ DMACH_RES2,
+ DMACH_SECURITY_RX, /* SDMA1 only */
+ DMACH_SECURITY_TX, /* SDMA1 only */
+ DMACH_MAX /* the end */
+};
+
+static __inline__ int s3c_dma_has_circular(void)
+{
+ /* we will be supporting ciruclar buffers as soon as we have DMA
+ * engine support.
+ */
+ return 1;
+}
+
+#define S3C2410_DMAF_CIRCULAR (1 << 0)
+
+#include <plat/dma.h>
#endif /* __ASM_ARCH_IRQ_H */
#define S3C_VA_UART3 S3C_VA_UARTx(3)
#define S3C64XX_PA_FB (0x77100000)
+#define S3C64XX_PA_USB_HSOTG (0x7C000000)
+#define S3C64XX_PA_WATCHDOG (0x7E004000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
#define S3C64XX_PA_IIS0 (0x7F002000)
#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_MODEM (0x74108000)
#define S3C64XX_VA_MODEM S3C_ADDR(0x00600000)
+#define S3C64XX_PA_USBHOST (0x74300000)
+
/* place VICs close together */
#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00)
#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000)
#define S3C_PA_IIC S3C64XX_PA_IIC0
#define S3C_PA_IIC1 S3C64XX_PA_IIC1
#define S3C_PA_FB S3C64XX_PA_FB
+#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
+#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#endif /* __ASM_ARCH_6400_MAP_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/include/mach/regs-clock.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - clock register compatibility with s3c24xx
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-clock.h>
+
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H __FILE__
+#include <plat/watchdog-reset.h>
+
static void arch_idle(void)
{
/* nothing here yet */
static void arch_reset(char mode, const char *cmd)
{
- /* nothing here yet */
+ if (mode != 's')
+ arch_wdt_reset();
+
+ /* if all else fails, or mode was for soft, jump to 0 */
+ cpu_reset(0);
}
#endif /* __ASM_ARCH_IRQ_H */
--- /dev/null
+/* linux/arch/arm/mach-s3c6400/mach-smdk6400.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+
+#include <plat/s3c6400.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/iic.h>
+
+#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg smdk6400_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+static struct map_desc smdk6400_iodesc[] = {};
+
+static void __init smdk6400_map_io(void)
+{
+ s3c64xx_init_io(smdk6400_iodesc, ARRAY_SIZE(smdk6400_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(smdk6400_uartcfgs, ARRAY_SIZE(smdk6400_uartcfgs));
+}
+
+static struct platform_device *smdk6400_devices[] __initdata = {
+ &s3c_device_hsmmc1,
+ &s3c_device_i2c0,
+};
+
+static struct i2c_board_info i2c_devs[] __initdata = {
+ { I2C_BOARD_INFO("wm8753", 0x1A), },
+ { I2C_BOARD_INFO("24c08", 0x50), },
+};
+
+static void __init smdk6400_machine_init(void)
+{
+ i2c_register_board_info(0, i2c_devs, ARRAY_SIZE(i2c_devs));
+ platform_add_devices(smdk6400_devices, ARRAY_SIZE(smdk6400_devices));
+}
+
+MACHINE_START(SMDK6400, "SMDK6400")
+ /* Maintainer: Ben Dooks <ben@fluff.org> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+
+ .init_irq = s3c6400_init_irq,
+ .map_io = smdk6400_map_io,
+ .init_machine = smdk6400_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/* linux/arch/arm/mach-s3c6410/cpu.c
+ *
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
+
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+#include <plat/sdhci.h>
+#include <plat/iic-core.h>
+#include <plat/s3c6400.h>
+
+void __init s3c6400_map_io(void)
+{
+ /* setup SDHCI */
+
+ s3c6400_default_sdhci0();
+ s3c6400_default_sdhci1();
+
+ /* the i2c devices are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+}
+
+void __init s3c6400_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
+ s3c24xx_register_baseclocks(xtal);
+ s3c64xx_register_clocks();
+ s3c6400_register_clocks(S3C6400_CLKDIV0_ARM_MASK);
+ s3c6400_setup_clocks();
+}
+
+void __init s3c6400_init_irq(void)
+{
+ /* VIC0 does not have IRQS 5..7,
+ * VIC1 is fully populated. */
+ s3c64xx_init_irq(~0 & ~(0xf << 5), ~0);
+}
+
+struct sysdev_class s3c6400_sysclass = {
+ .name = "s3c6400-core",
+};
+
+static struct sys_device s3c6400_sysdev = {
+ .cls = &s3c6400_sysclass,
+};
+
+static int __init s3c6400_core_init(void)
+{
+ return sysdev_class_register(&s3c6400_sysclass);
+}
+
+core_initcall(s3c6400_core_init);
+
+int __init s3c6400_init(void)
+{
+ printk("S3C6400: Initialising architecture\n");
+
+ return sysdev_register(&s3c6400_sysdev);
+}
--- /dev/null
+/* linux/arch/arm/mach-s3c6410/setup-sdhci.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s3c6400_hsmmc_clksrcs[4] = {
+ [0] = "hsmmc",
+ [1] = "hsmmc",
+ [2] = "mmc_bus",
+ /* [3] = "48m", - note not succesfully used yet */
+};
+
+void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card)
+{
+ u32 ctrl2, ctrl3;
+
+ ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+ ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+ ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+ S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+ S3C_SDHCI_CTRL2_ENFBCLKRX |
+ S3C_SDHCI_CTRL2_DFCNT_NONE |
+ S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+ if (ios->clock < 25 * 1000000)
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+ S3C_SDHCI_CTRL3_FCSEL2 |
+ S3C_SDHCI_CTRL3_FCSEL1 |
+ S3C_SDHCI_CTRL3_FCSEL0);
+ else
+ ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+ printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3);
+ writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+ writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
+
config S3C6410_SETUP_SDHCI
bool
+ select S3C64XX_SETUP_SDHCI_GPIO
help
Internal helper functions for S3C6410 based SDHCI systems
+config MACH_ANW6410
+ bool "A&W6410"
+ select CPU_S3C6410
+ select S3C_DEV_FB
+ select S3C64XX_SETUP_FB_24BPP
+ help
+ Machine support for the A&W6410
+
config MACH_SMDK6410
bool "SMDK6410"
select CPU_S3C6410
select S3C_DEV_HSMMC1
select S3C_DEV_I2C1
select S3C_DEV_FB
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_USB_HSOTG
select S3C6410_SETUP_SDHCI
select S3C64XX_SETUP_I2C1
select S3C64XX_SETUP_FB_24BPP
channels 0 and 1 are the same.
endchoice
+
+config SMDK6410_WM1190_EV1
+ bool "Support Wolfson Microelectronics 1190-EV1 PMIC card"
+ depends on MACH_SMDK6410
+ select REGULATOR
+ select REGULATOR_WM8350
+ select MFD_WM8350_I2C
+ select MFD_WM8350_CONFIG_MODE_0
+ select MFD_WM8350_CONFIG_MODE_3
+ select MFD_WM8352_CONFIG_MODE_0
+ help
+ The Wolfson Microelectronics 1190-EV1 is a WM835x based PMIC
+ and audio daughtercard for the Samsung SMDK6410 reference
+ platform. Enabling this option will build support for this
+ module into the kernel. The presence of the module will be
+ detected at runtime so the the resulting kernel can be used
+ with or without the 1190-EV1 fitted.
+
+config MACH_NCP
+ bool "NCP"
+ select CPU_S3C6410
+ select S3C_DEV_I2C1
+ select S3C_DEV_HSMMC1
+ select S3C64XX_SETUP_I2C1
+ help
+ Machine support for the Samsung NCP
# machine support
+obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
+obj-$(CONFIG_MACH_NCP) += mach-ncp.o
+
+
#include <plat/cpu-freq.h>
#include <plat/regs-serial.h>
+#include <plat/regs-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
printk(KERN_DEBUG "%s: initialising clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s3c64xx_register_clocks();
- s3c6400_register_clocks();
+ s3c6400_register_clocks(S3C6410_CLKDIV0_ARM_MASK);
s3c6400_setup_clocks();
}
--- /dev/null
+/* linux/arch/arm/mach-s3c6410/mach-anw6410.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ * Copyright 2009 Kwangwoo Lee
+ * Kwangwoo Lee <kwangwoo.lee@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/dm9000.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-modem.h>
+
+/* DM9000 */
+#define ANW6410_PA_DM9000 (0x18000000)
+
+/* A hardware buffer to control external devices is mapped at 0x30000000.
+ * It can not be read. So current status must be kept in anw6410_extdev_status.
+ */
+#define ANW6410_VA_EXTDEV S3C_ADDR(0x02000000)
+#define ANW6410_PA_EXTDEV (0x30000000)
+
+#define ANW6410_EN_DM9000 (1<<11)
+#define ANW6410_EN_LCD (1<<14)
+
+static __u32 anw6410_extdev_status;
+
+static struct s3c2410_uartcfg anw6410_uartcfgs[] __initdata = {
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = 0x3c5,
+ .ulcon = 0x03,
+ .ufcon = 0x51,
+ },
+};
+
+/* framebuffer and LCD setup. */
+static void __init anw6410_lcd_mode_set(void)
+{
+ u32 tmp;
+
+ /* set the LCD type */
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the LCD bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
+}
+
+/* GPF1 = LCD panel power
+ * GPF4 = LCD backlight control
+ */
+static void anw6410_lcd_power_set(struct plat_lcd_data *pd,
+ unsigned int power)
+{
+ if (power) {
+ anw6410_extdev_status |= (ANW6410_EN_LCD << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+ gpio_direction_output(S3C64XX_GPF(1), 1);
+ gpio_direction_output(S3C64XX_GPF(4), 1);
+ } else {
+ anw6410_extdev_status &= ~(ANW6410_EN_LCD << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+
+ gpio_direction_output(S3C64XX_GPF(1), 0);
+ gpio_direction_output(S3C64XX_GPF(4), 0);
+ }
+}
+
+static struct plat_lcd_data anw6410_lcd_power_data = {
+ .set_power = anw6410_lcd_power_set,
+};
+
+static struct platform_device anw6410_lcd_powerdev = {
+ .name = "platform-lcd",
+ .dev.parent = &s3c_device_fb.dev,
+ .dev.platform_data = &anw6410_lcd_power_data,
+};
+
+static struct s3c_fb_pd_win anw6410_fb_win0 = {
+ /* this is to ensure we use win0 */
+ .win_mode = {
+ .pixclock = 41094,
+ .left_margin = 8,
+ .right_margin = 13,
+ .upper_margin = 7,
+ .lower_margin = 5,
+ .hsync_len = 3,
+ .vsync_len = 1,
+ .xres = 800,
+ .yres = 480,
+ },
+ .max_bpp = 32,
+ .default_bpp = 16,
+};
+
+/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */
+static struct s3c_fb_platdata anw6410_lcd_pdata __initdata = {
+ .setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
+ .win[0] = &anw6410_fb_win0,
+ .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+};
+
+/* DM9000AEP 10/100 ethernet controller */
+static void __init anw6410_dm9000_enable(void)
+{
+ anw6410_extdev_status |= (ANW6410_EN_DM9000 << 16);
+ __raw_writel(anw6410_extdev_status, ANW6410_VA_EXTDEV);
+}
+
+static struct resource anw6410_dm9000_resource[] = {
+ [0] = {
+ .start = ANW6410_PA_DM9000,
+ .end = ANW6410_PA_DM9000 + 3,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = ANW6410_PA_DM9000 + 4,
+ .end = ANW6410_PA_DM9000 + 4 + 500,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_EINT(15),
+ .end = IRQ_EINT(15),
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
+ },
+};
+
+static struct dm9000_plat_data anw6410_dm9000_pdata = {
+ .flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
+ /* dev_addr can be set to provide hwaddr. */
+};
+
+static struct platform_device anw6410_device_eth = {
+ .name = "dm9000",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(anw6410_dm9000_resource),
+ .resource = anw6410_dm9000_resource,
+ .dev = {
+ .platform_data = &anw6410_dm9000_pdata,
+ },
+};
+
+static struct map_desc anw6410_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)ANW6410_VA_EXTDEV,
+ .pfn = __phys_to_pfn(ANW6410_PA_EXTDEV),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+};
+
+static struct platform_device *anw6410_devices[] __initdata = {
+ &s3c_device_fb,
+ &anw6410_lcd_powerdev,
+ &anw6410_device_eth,
+};
+
+static void __init anw6410_map_io(void)
+{
+ s3c64xx_init_io(anw6410_iodesc, ARRAY_SIZE(anw6410_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(anw6410_uartcfgs, ARRAY_SIZE(anw6410_uartcfgs));
+
+ anw6410_lcd_mode_set();
+}
+
+static void __init anw6410_machine_init(void)
+{
+ s3c_fb_set_platdata(&anw6410_lcd_pdata);
+
+ gpio_request(S3C64XX_GPF(1), "panel power");
+ gpio_request(S3C64XX_GPF(4), "LCD backlight");
+
+ anw6410_dm9000_enable();
+
+ platform_add_devices(anw6410_devices, ARRAY_SIZE(anw6410_devices));
+}
+
+MACHINE_START(ANW6410, "A&W6410")
+ /* Maintainer: Kwangwoo Lee <kwangwoo.lee@gmail.com> */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+
+ .init_irq = s3c6410_init_irq,
+ .map_io = anw6410_map_io,
+ .init_machine = anw6410_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-s3c6410/mach-ncp.c
+ *
+ * Copyright (C) 2008-2009 Samsung Electronics
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/serial_core.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+
+#include <video/platform_lcd.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/iic.h>
+#include <plat/fb.h>
+
+#include <plat/s3c6410.h>
+#include <plat/clock.h>
+#include <plat/devs.h>
+#include <plat/cpu.h>
+
+#define UCON S3C2410_UCON_DEFAULT
+#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE
+#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
+
+static struct s3c2410_uartcfg ncp_uartcfgs[] __initdata = {
+ /* REVISIT: NCP uses only serial 1, 2 */
+ [0] = {
+ .hwport = 0,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [1] = {
+ .hwport = 1,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+ [2] = {
+ .hwport = 2,
+ .flags = 0,
+ .ucon = UCON,
+ .ulcon = ULCON,
+ .ufcon = UFCON,
+ },
+};
+
+static struct platform_device *ncp_devices[] __initdata = {
+ &s3c_device_hsmmc1,
+ &s3c_device_i2c0,
+};
+
+struct map_desc ncp_iodesc[] = {};
+
+static void __init ncp_map_io(void)
+{
+ s3c64xx_init_io(ncp_iodesc, ARRAY_SIZE(ncp_iodesc));
+ s3c24xx_init_clocks(12000000);
+ s3c24xx_init_uarts(ncp_uartcfgs, ARRAY_SIZE(ncp_uartcfgs));
+}
+
+static void __init ncp_machine_init(void)
+{
+ s3c_i2c0_set_platdata(NULL);
+
+ platform_add_devices(ncp_devices, ARRAY_SIZE(ncp_devices));
+}
+
+MACHINE_START(NCP, "NCP")
+ /* Maintainer: Samsung Electronics */
+ .phys_io = S3C_PA_UART & 0xfff00000,
+ .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
+ .boot_params = S3C64XX_PA_SDRAM + 0x100,
+ .init_irq = s3c6410_init_irq,
+ .map_io = ncp_map_io,
+ .init_machine = ncp_machine_init,
+ .timer = &s3c24xx_timer,
+MACHINE_END
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/delay.h>
+#include <linux/smsc911x.h>
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/pmic.h>
+#endif
#include <video/platform_lcd.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
+#include <plat/regs-modem.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-sys.h>
#include <plat/iic.h>
#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
#include <plat/s3c6410.h>
#include <plat/clock.h>
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
};
+static struct resource smdk6410_smsc911x_resources[] = {
+ [0] = {
+ .start = 0x18000000,
+ .end = 0x18000000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C_EINT(10),
+ .end = S3C_EINT(10),
+ .flags = IORESOURCE_IRQ | IRQ_TYPE_LEVEL_LOW,
+ },
+};
+
+static struct smsc911x_platform_config smdk6410_smsc911x_pdata = {
+ .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+ .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+ .flags = SMSC911X_USE_32BIT | SMSC911X_FORCE_INTERNAL_PHY,
+ .phy_interface = PHY_INTERFACE_MODE_MII,
+};
+
+
+static struct platform_device smdk6410_smsc911x = {
+ .name = "smsc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smdk6410_smsc911x_resources),
+ .resource = &smdk6410_smsc911x_resources[0],
+ .dev = {
+ .platform_data = &smdk6410_smsc911x_pdata,
+ },
+};
+
static struct map_desc smdk6410_iodesc[] = {};
static struct platform_device *smdk6410_devices[] __initdata = {
&s3c_device_i2c0,
&s3c_device_i2c1,
&s3c_device_fb,
+ &s3c_device_usb,
+ &s3c_device_usb_hsotg,
&smdk6410_lcd_powerdev,
+
+ &smdk6410_smsc911x,
+};
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+/* S3C64xx internal logic & PLL */
+static struct regulator_init_data wm8350_dcdc1_data = {
+ .constraints = {
+ .name = "PVDD_INT/PVDD_PLL",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+};
+
+/* Memory */
+static struct regulator_init_data wm8350_dcdc3_data = {
+ .constraints = {
+ .name = "PVDD_MEM",
+ .min_uV = 1800000,
+ .max_uV = 1800000,
+ .always_on = 1,
+ .state_mem = {
+ .uV = 1800000,
+ .mode = REGULATOR_MODE_NORMAL,
+ .enabled = 1,
+ },
+ .initial_state = PM_SUSPEND_MEM,
+ },
+};
+
+/* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_init_data wm8350_dcdc4_data = {
+ .constraints = {
+ .name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .always_on = 1,
+ },
+};
+
+/* ARM core */
+static struct regulator_consumer_supply dcdc6_consumers[] = {
+ {
+ .supply = "vddarm",
+ }
+};
+
+static struct regulator_init_data wm8350_dcdc6_data = {
+ .constraints = {
+ .name = "PVDD_ARM",
+ .min_uV = 1000000,
+ .max_uV = 1300000,
+ .always_on = 1,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(dcdc6_consumers),
+ .consumer_supplies = dcdc6_consumers,
};
+/* Alive */
+static struct regulator_init_data wm8350_ldo1_data = {
+ .constraints = {
+ .name = "PVDD_ALIVE",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .always_on = 1,
+ .apply_uV = 1,
+ },
+};
+
+/* OTG */
+static struct regulator_init_data wm8350_ldo2_data = {
+ .constraints = {
+ .name = "PVDD_OTG",
+ .min_uV = 3300000,
+ .max_uV = 3300000,
+ .always_on = 1,
+ },
+};
+
+/* LCD */
+static struct regulator_init_data wm8350_ldo3_data = {
+ .constraints = {
+ .name = "PVDD_LCD",
+ .min_uV = 3000000,
+ .max_uV = 3000000,
+ .always_on = 1,
+ },
+};
+
+/* OTGi/1190-EV1 HPVDD & AVDD */
+static struct regulator_init_data wm8350_ldo4_data = {
+ .constraints = {
+ .name = "PVDD_OTGI/HPVDD/AVDD",
+ .min_uV = 1200000,
+ .max_uV = 1200000,
+ .apply_uV = 1,
+ .always_on = 1,
+ },
+};
+
+static struct {
+ int regulator;
+ struct regulator_init_data *initdata;
+} wm1190_regulators[] = {
+ { WM8350_DCDC_1, &wm8350_dcdc1_data },
+ { WM8350_DCDC_3, &wm8350_dcdc3_data },
+ { WM8350_DCDC_4, &wm8350_dcdc4_data },
+ { WM8350_DCDC_6, &wm8350_dcdc6_data },
+ { WM8350_LDO_1, &wm8350_ldo1_data },
+ { WM8350_LDO_2, &wm8350_ldo2_data },
+ { WM8350_LDO_3, &wm8350_ldo3_data },
+ { WM8350_LDO_4, &wm8350_ldo4_data },
+};
+
+static int __init smdk6410_wm8350_init(struct wm8350 *wm8350)
+{
+ int i;
+
+ /* Instantiate the regulators */
+ for (i = 0; i < ARRAY_SIZE(wm1190_regulators); i++)
+ wm8350_register_regulator(wm8350,
+ wm1190_regulators[i].regulator,
+ wm1190_regulators[i].initdata);
+
+ return 0;
+}
+
+static struct wm8350_platform_data __initdata smdk6410_wm8350_pdata = {
+ .init = smdk6410_wm8350_init,
+ .irq_high = 1,
+};
+#endif
+
static struct i2c_board_info i2c_devs0[] __initdata = {
{ I2C_BOARD_INFO("24c08", 0x50), },
{ I2C_BOARD_INFO("wm8580", 0x1b), },
+
+#ifdef CONFIG_SMDK6410_WM1190_EV1
+ { I2C_BOARD_INFO("wm8350", 0x1a),
+ .platform_data = &smdk6410_wm8350_pdata,
+ .irq = S3C_EINT(12),
+ },
+#endif
};
static struct i2c_board_info i2c_devs1[] __initdata = {
static void __init smdk6410_map_io(void)
{
+ u32 tmp;
+
s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs));
+
+ /* set the LCD type */
+
+ tmp = __raw_readl(S3C64XX_SPCON);
+ tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
+ tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
+ __raw_writel(tmp, S3C64XX_SPCON);
+
+ /* remove the lcd bypass */
+ tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
+ tmp &= ~MIFPCON_LCD_BYPASS;
+ __raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
static void __init smdk6410_machine_init(void)
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
#include <plat/regs-sdhci.h>
#include <plat/sdhci.h>
/* [3] = "48m", - note not succesfully used yet */
};
-void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- unsigned int gpio;
- unsigned int end;
-
- end = S3C64XX_GPG(2 + width);
-
- /* Set all the necessary GPG pins to special-function 0 */
- for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
-}
void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
void __iomem *r,
writel(ctrl3, r + S3C_SDHCI_CONTROL3);
}
-void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- unsigned int gpio;
- unsigned int end;
-
- end = S3C64XX_GPH(2 + width);
-
- /* Set all the necessary GPG pins to special-function 0 */
- for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- }
-
- s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
-}
{
unsigned int i;
- vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0);
+ vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0);
set_irq_chained_handler(IRQ_VICSOURCE31, sic_handle_irq);
# Object file lists.
-obj-y := irq.o time.o
+obj-y := irq.o time.o mfp-w90p910.o gpio.o clock.o
# W90X900 CPU support files
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/clock.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#include "clock.h"
+
+static DEFINE_SPINLOCK(clocks_lock);
+
+int clk_enable(struct clk *clk)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (clk->enabled++ == 0)
+ (clk->enable)(clk, 1);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+ unsigned long flags;
+
+ WARN_ON(clk->enabled == 0);
+
+ spin_lock_irqsave(&clocks_lock, flags);
+ if (--clk->enabled == 0)
+ (clk->enable)(clk, 0);
+ spin_unlock_irqrestore(&clocks_lock, flags);
+}
+EXPORT_SYMBOL(clk_disable);
+
+void w90x900_clk_enable(struct clk *clk, int enable)
+{
+ unsigned int clocks = clk->cken;
+ unsigned long clken;
+
+ clken = __raw_readl(W90X900_VA_CLKPWR);
+
+ if (enable)
+ clken |= clocks;
+ else
+ clken &= ~clocks;
+
+ __raw_writel(clken, W90X900_VA_CLKPWR);
+}
+
+void clks_register(struct clk_lookup *clks, size_t num)
+{
+ int i;
+
+ for (i = 0; i < num; i++)
+ clkdev_add(&clks[i]);
+}
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License.
+ */
+
+#include <asm/clkdev.h>
+
+void w90x900_clk_enable(struct clk *clk, int enable);
+void clks_register(struct clk_lookup *clks, size_t num);
+
+struct clk {
+ unsigned long cken;
+ unsigned int enabled;
+ void (*enable)(struct clk *, int enable);
+};
+
+#define DEFINE_CLK(_name, _ctrlbit) \
+struct clk clk_##_name = { \
+ .enable = w90x900_clk_enable, \
+ .cken = (1 << _ctrlbit), \
+ }
+
+#define DEF_CLKLOOK(_clk, _devname, _conname) \
+ { \
+ .clk = _clk, \
+ .dev_id = _devname, \
+ .con_id = _conname, \
+ }
+
extern void w90x900_init_irq(void);
extern void w90p910_init_io(struct map_desc *mach_desc, int size);
extern void w90p910_init_uarts(struct w90x900_uartcfg *cfg, int no);
-extern void w90p910_init_clocks(int xtal);
+extern void w90p910_init_clocks(void);
extern void w90p910_map_io(struct map_desc *mach_desc, int size);
extern struct platform_device w90p910_serial_device;
extern struct sys_timer w90x900_timer;
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90p910/gpio.c
+ *
+ * Generic w90p910 GPIO handling
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+
+#define GPIO_BASE (W90X900_VA_GPIO)
+#define GPIO_DIR (0x04)
+#define GPIO_OUT (0x08)
+#define GPIO_IN (0x0C)
+#define GROUPINERV (0x10)
+#define GPIO_GPIO(Nb) (0x00000001 << (Nb))
+#define to_w90p910_gpio_chip(c) container_of(c, struct w90p910_gpio_chip, chip)
+
+#define W90P910_GPIO_CHIP(name, base_gpio, nr_gpio) \
+ { \
+ .chip = { \
+ .label = name, \
+ .direction_input = w90p910_dir_input, \
+ .direction_output = w90p910_dir_output, \
+ .get = w90p910_gpio_get, \
+ .set = w90p910_gpio_set, \
+ .base = base_gpio, \
+ .ngpio = nr_gpio, \
+ } \
+ }
+
+struct w90p910_gpio_chip {
+ struct gpio_chip chip;
+ void __iomem *regbase; /* Base of group register*/
+ spinlock_t gpio_lock;
+};
+
+static int w90p910_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+ void __iomem *pio = w90p910_gpio->regbase + GPIO_IN;
+ unsigned int regval;
+
+ regval = __raw_readl(pio);
+ regval &= GPIO_GPIO(offset);
+
+ return (regval != 0);
+}
+
+static void w90p910_gpio_set(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+ void __iomem *pio = w90p910_gpio->regbase + GPIO_OUT;
+ unsigned int regval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+ regval = __raw_readl(pio);
+
+ if (val)
+ regval |= GPIO_GPIO(offset);
+ else
+ regval &= ~GPIO_GPIO(offset);
+
+ __raw_writel(regval, pio);
+
+ spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+}
+
+static int w90p910_dir_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+ void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ unsigned int regval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+ regval = __raw_readl(pio);
+ regval &= ~GPIO_GPIO(offset);
+ __raw_writel(regval, pio);
+
+ spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+ return 0;
+}
+
+static int w90p910_dir_output(struct gpio_chip *chip, unsigned offset, int val)
+{
+ struct w90p910_gpio_chip *w90p910_gpio = to_w90p910_gpio_chip(chip);
+ void __iomem *outreg = w90p910_gpio->regbase + GPIO_OUT;
+ void __iomem *pio = w90p910_gpio->regbase + GPIO_DIR;
+ unsigned int regval;
+ unsigned long flags;
+
+ spin_lock_irqsave(&w90p910_gpio->gpio_lock, flags);
+
+ regval = __raw_readl(pio);
+ regval |= GPIO_GPIO(offset);
+ __raw_writel(regval, pio);
+
+ regval = __raw_readl(outreg);
+
+ if (val)
+ regval |= GPIO_GPIO(offset);
+ else
+ regval &= ~GPIO_GPIO(offset);
+
+ __raw_writel(regval, outreg);
+
+ spin_unlock_irqrestore(&w90p910_gpio->gpio_lock, flags);
+
+ return 0;
+}
+
+static struct w90p910_gpio_chip w90p910_gpio[] = {
+ W90P910_GPIO_CHIP("GROUPC", 0, 16),
+ W90P910_GPIO_CHIP("GROUPD", 16, 10),
+ W90P910_GPIO_CHIP("GROUPE", 26, 14),
+ W90P910_GPIO_CHIP("GROUPF", 40, 10),
+ W90P910_GPIO_CHIP("GROUPG", 50, 17),
+ W90P910_GPIO_CHIP("GROUPH", 67, 8),
+ W90P910_GPIO_CHIP("GROUPI", 75, 17),
+};
+
+void __init w90p910_init_gpio(int nr_group)
+{
+ unsigned i;
+ struct w90p910_gpio_chip *gpio_chip;
+
+ for (i = 0; i < nr_group; i++) {
+ gpio_chip = &w90p910_gpio[i];
+ spin_lock_init(&gpio_chip->gpio_lock);
+ gpio_chip->regbase = GPIO_BASE + i * GROUPINERV;
+ gpiochip_add(&gpio_chip->chip);
+ }
+}
--- /dev/null
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90p910/include/mach/gpio.h
+ *
+ * Generic w90p910 GPIO handling
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_W90P910_GPIO_H
+#define __ASM_ARCH_W90P910_GPIO_H
+
+#include <mach/hardware.h>
+#include <asm/irq.h>
+#include <asm-generic/gpio.h>
+
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+ return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+ return irq;
+}
+
+#endif
/*
* arch/arm/mach-w90x900/include/mach/irqs.h
*
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
*
*/
/* Main cpu interrupts */
#define IRQ_WDT W90X900_IRQ(1)
+#define IRQ_GROUP0 W90X900_IRQ(2)
+#define IRQ_GROUP1 W90X900_IRQ(3)
+#define IRQ_ACTL W90X900_IRQ(4)
+#define IRQ_LCD W90X900_IRQ(5)
+#define IRQ_RTC W90X900_IRQ(6)
#define IRQ_UART0 W90X900_IRQ(7)
#define IRQ_UART1 W90X900_IRQ(8)
#define IRQ_UART2 W90X900_IRQ(9)
#define IRQ_TIMER0 W90X900_IRQ(12)
#define IRQ_TIMER1 W90X900_IRQ(13)
#define IRQ_T_INT_GROUP W90X900_IRQ(14)
+#define IRQ_USBH W90X900_IRQ(15)
+#define IRQ_EMCTX W90X900_IRQ(16)
+#define IRQ_EMCRX W90X900_IRQ(17)
+#define IRQ_GDMAGROUP W90X900_IRQ(18)
+#define IRQ_DMAC W90X900_IRQ(19)
+#define IRQ_FMI W90X900_IRQ(20)
+#define IRQ_USBD W90X900_IRQ(21)
+#define IRQ_ATAPI W90X900_IRQ(22)
+#define IRQ_G2D W90X900_IRQ(23)
+#define IRQ_PCI W90X900_IRQ(24)
+#define IRQ_SCGROUP W90X900_IRQ(25)
+#define IRQ_I2CGROUP W90X900_IRQ(26)
+#define IRQ_SSP W90X900_IRQ(27)
+#define IRQ_PWM W90X900_IRQ(28)
+#define IRQ_KPI W90X900_IRQ(29)
+#define IRQ_P2SGROUP W90X900_IRQ(30)
#define IRQ_ADC W90X900_IRQ(31)
#define NR_IRQS (IRQ_ADC+1)
+/*for irq group*/
+
+#define IRQ_PS2_PORT0 0x10000000
+#define IRQ_PS2_PORT1 0x20000000
+#define IRQ_I2C_LINE0 0x04000000
+#define IRQ_I2C_LINE1 0x08000000
+#define IRQ_SC_CARD0 0x01000000
+#define IRQ_SC_CARD1 0x02000000
+#define IRQ_GDMA_CH0 0x00100000
+#define IRQ_GDMA_CH1 0x00200000
+#define IRQ_TIMER2 0x00010000
+#define IRQ_TIMER3 0x00020000
+#define IRQ_TIMER4 0x00040000
+#define IRQ_GROUP0_IRQ0 0x00000001
+#define IRQ_GROUP0_IRQ1 0x00000002
+#define IRQ_GROUP0_IRQ2 0x00000004
+#define IRQ_GROUP0_IRQ3 0x00000008
+#define IRQ_GROUP1_IRQ4 0x00000010
+#define IRQ_GROUP1_IRQ5 0x00000020
+#define IRQ_GROUP1_IRQ6 0x00000040
+#define IRQ_GROUP1_IRQ7 0x00000080
+
#endif /* __ASM_ARCH_IRQ_H */
/*
* arch/arm/mach-w90x900/include/mach/map.h
*
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
*
*/
* interrupt controller is the first thing we put in, to make
* the assembly code for the irq detection easier
*/
-
#define W90X900_VA_IRQ W90X900_ADDR(0x00000000)
#define W90X900_PA_IRQ (0xB8002000)
#define W90X900_SZ_IRQ SZ_4K
#define W90X900_SZ_GCR SZ_4K
/* Clock and Power management */
-
#define W90X900_VA_CLKPWR (W90X900_VA_GCR+0x200)
#define W90X900_PA_CLKPWR (0xB0000200)
#define W90X900_SZ_CLKPWR SZ_4K
/* EBI management */
-
#define W90X900_VA_EBI W90X900_ADDR(0x00001000)
#define W90X900_PA_EBI (0xB0001000)
#define W90X900_SZ_EBI SZ_4K
/* UARTs */
-
#define W90X900_VA_UART W90X900_ADDR(0x08000000)
#define W90X900_PA_UART (0xB8000000)
#define W90X900_SZ_UART SZ_4K
/* Timers */
-
#define W90X900_VA_TIMER W90X900_ADDR(0x08001000)
#define W90X900_PA_TIMER (0xB8001000)
#define W90X900_SZ_TIMER SZ_4K
/* GPIO ports */
-
#define W90X900_VA_GPIO W90X900_ADDR(0x08003000)
#define W90X900_PA_GPIO (0xB8003000)
#define W90X900_SZ_GPIO SZ_4K
+/* GDMA control */
+#define W90X900_VA_GDMA W90X900_ADDR(0x00004000)
+#define W90X900_PA_GDMA (0xB0004000)
+#define W90X900_SZ_GDMA SZ_4K
+
+/* USB host controller*/
+#define W90X900_VA_USBEHCIHOST W90X900_ADDR(0x00005000)
+#define W90X900_PA_USBEHCIHOST (0xB0005000)
+#define W90X900_SZ_USBEHCIHOST SZ_4K
+
+#define W90X900_VA_USBOHCIHOST W90X900_ADDR(0x00007000)
+#define W90X900_PA_USBOHCIHOST (0xB0007000)
+#define W90X900_SZ_USBOHCIHOST SZ_4K
+
+/* I2C hardware controller */
+#define W90X900_VA_I2C W90X900_ADDR(0x08006000)
+#define W90X900_PA_I2C (0xB8006000)
+#define W90X900_SZ_I2C SZ_4K
+
+/* Keypad Interface*/
+#define W90X900_VA_KPI W90X900_ADDR(0x08008000)
+#define W90X900_PA_KPI (0xB8008000)
+#define W90X900_SZ_KPI SZ_4K
+
+/* Smart card host*/
+#define W90X900_VA_SC W90X900_ADDR(0x08005000)
+#define W90X900_PA_SC (0xB8005000)
+#define W90X900_SZ_SC SZ_4K
+
+/* LCD controller*/
+#define W90X900_VA_LCD W90X900_ADDR(0x00008000)
+#define W90X900_PA_LCD (0xB0008000)
+#define W90X900_SZ_LCD SZ_4K
+
+/* 2D controller*/
+#define W90X900_VA_GE W90X900_ADDR(0x0000B000)
+#define W90X900_PA_GE (0xB000B000)
+#define W90X900_SZ_GE SZ_4K
+
+/* ATAPI */
+#define W90X900_VA_ATAPI W90X900_ADDR(0x0000A000)
+#define W90X900_PA_ATAPI (0xB000A000)
+#define W90X900_SZ_ATAPI SZ_4K
+
+/* ADC */
+#define W90X900_VA_ADC W90X900_ADDR(0x0800A000)
+#define W90X900_PA_ADC (0xB800A000)
+#define W90X900_SZ_ADC SZ_4K
+
+/* PS2 Interface*/
+#define W90X900_VA_PS2 W90X900_ADDR(0x08009000)
+#define W90X900_PA_PS2 (0xB8009000)
+#define W90X900_SZ_PS2 SZ_4K
+
+/* RTC */
+#define W90X900_VA_RTC W90X900_ADDR(0x08004000)
+#define W90X900_PA_RTC (0xB8004000)
+#define W90X900_SZ_RTC SZ_4K
+
+/* Pulse Width Modulation(PWM) Registers */
+#define W90X900_VA_PWM W90X900_ADDR(0x08007000)
+#define W90X900_PA_PWM (0xB8007000)
+#define W90X900_SZ_PWM SZ_4K
+
+/* Audio Controller controller */
+#define W90X900_VA_ACTL W90X900_ADDR(0x00009000)
+#define W90X900_PA_ACTL (0xB0009000)
+#define W90X900_SZ_ACTL SZ_4K
+
+/* DMA controller */
+#define W90X900_VA_DMA W90X900_ADDR(0x0000c000)
+#define W90X900_PA_DMA (0xB000c000)
+#define W90X900_SZ_DMA SZ_4K
+
+/* FMI controller */
+#define W90X900_VA_FMI W90X900_ADDR(0x0000d000)
+#define W90X900_PA_FMI (0xB000d000)
+#define W90X900_SZ_FMI SZ_4K
+
+/* USB Device port */
+#define W90X900_VA_USBDEV W90X900_ADDR(0x00006000)
+#define W90X900_PA_USBDEV (0xB0006000)
+#define W90X900_SZ_USBDEV SZ_4K
+
+/* External MAC control*/
+#define W90X900_VA_EMC W90X900_ADDR(0x00003000)
+#define W90X900_PA_EMC (0xB0003000)
+#define W90X900_SZ_EMC SZ_4K
+
#endif /* __ASM_ARCH_MAP_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-clock.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_CLOCK_H
+#define __ASM_ARCH_REGS_CLOCK_H
+
+/* Clock Control Registers */
+#define CLK_BA W90X900_VA_CLKPWR
+#define REG_CLKEN (CLK_BA + 0x00)
+#define REG_CLKSEL (CLK_BA + 0x04)
+#define REG_CLKDIV (CLK_BA + 0x08)
+#define REG_PLLCON0 (CLK_BA + 0x0C)
+#define REG_PLLCON1 (CLK_BA + 0x10)
+#define REG_PMCON (CLK_BA + 0x14)
+#define REG_IRQWAKECON (CLK_BA + 0x18)
+#define REG_IRQWAKEFLAG (CLK_BA + 0x1C)
+#define REG_IPSRST (CLK_BA + 0x20)
+#define REG_CLKEN1 (CLK_BA + 0x24)
+#define REG_CLKDIV1 (CLK_BA + 0x28)
+
+#endif /* __ASM_ARCH_REGS_CLOCK_H */
--- /dev/null
+/*
+ * arch/arm/mach-w90x900/include/mach/regs-usb.h
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_REGS_USB_H
+#define __ASM_ARCH_REGS_USB_H
+
+/* usb Control Registers */
+#define USBH_BA W90X900_VA_USBEHCIHOST
+#define USBD_BA W90X900_VA_USBDEV
+#define USBO_BA W90X900_VA_USBOHCIHOST
+
+/* USB Host Control Registers */
+#define REG_UPSCR0 (USBH_BA+0x064)
+#define REG_UPSCR1 (USBH_BA+0x068)
+#define REG_USBPCR0 (USBH_BA+0x0C4)
+#define REG_USBPCR1 (USBH_BA+0x0C8)
+
+/* USBH OHCI Control Registers */
+#define REG_OpModEn (USBO_BA+0x204)
+/*This bit controls the polarity of over
+*current flag from external power IC.
+*/
+#define OCALow 0x08
+
+#endif /* __ASM_ARCH_REGS_USB_H */
*
* Based on mach-s3c2410/mach-smdk2410.c by Jonas Dietsche
*
- * Copyright (C) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (C) 2008 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * published by the Free Software Foundation;version 2 of the License.
*
*/
.num_resources = ARRAY_SIZE(w90p910_flash_resources),
};
+/* USB EHCI Host Controller */
+
+static struct resource w90x900_usb_ehci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBEHCIHOST,
+ .end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 w90x900_device_usb_ehci_dmamask = 0xffffffffUL;
+
+struct platform_device w90x900_device_usb_ehci = {
+ .name = "w90x900-ehci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_usb_ehci_resource),
+ .resource = w90x900_usb_ehci_resource,
+ .dev = {
+ .dma_mask = &w90x900_device_usb_ehci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+EXPORT_SYMBOL(w90x900_device_usb_ehci);
+
+/* USB OHCI Host Controller */
+
+static struct resource w90x900_usb_ohci_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBOHCIHOST,
+ .end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 w90x900_device_usb_ohci_dmamask = 0xffffffffUL;
+struct platform_device w90x900_device_usb_ohci = {
+ .name = "w90x900-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_usb_ohci_resource),
+ .resource = w90x900_usb_ohci_resource,
+ .dev = {
+ .dma_mask = &w90x900_device_usb_ohci_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+EXPORT_SYMBOL(w90x900_device_usb_ohci);
+
+/*TouchScreen controller*/
+
+static struct resource w90x900_ts_resource[] = {
+ [0] = {
+ .start = W90X900_PA_ADC,
+ .end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_ADC,
+ .end = IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device w90x900_device_ts = {
+ .name = "w90x900-ts",
+ .id = -1,
+ .resource = w90x900_ts_resource,
+ .num_resources = ARRAY_SIZE(w90x900_ts_resource),
+};
+EXPORT_SYMBOL(w90x900_device_ts);
+
+/* RTC controller*/
+
+static struct resource w90x900_rtc_resource[] = {
+ [0] = {
+ .start = W90X900_PA_RTC,
+ .end = W90X900_PA_RTC + 0xff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_RTC,
+ .end = IRQ_RTC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device w90x900_device_rtc = {
+ .name = "w90x900-rtc",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_rtc_resource),
+ .resource = w90x900_rtc_resource,
+};
+EXPORT_SYMBOL(w90x900_device_rtc);
+
+/* KPI controller*/
+
+static struct resource w90x900_kpi_resource[] = {
+ [0] = {
+ .start = W90X900_PA_KPI,
+ .end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KPI,
+ .end = IRQ_KPI,
+ .flags = IORESOURCE_IRQ,
+ }
+
+};
+
+struct platform_device w90x900_device_kpi = {
+ .name = "w90x900-kpi",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_kpi_resource),
+ .resource = w90x900_kpi_resource,
+};
+EXPORT_SYMBOL(w90x900_device_kpi);
+
+/* USB Device (Gadget)*/
+
+static struct resource w90x900_usbgadget_resource[] = {
+ [0] = {
+ .start = W90X900_PA_USBDEV,
+ .end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBD,
+ .end = IRQ_USBD,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+struct platform_device w90x900_device_usbgadget = {
+ .name = "w90x900-usbgadget",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(w90x900_usbgadget_resource),
+ .resource = w90x900_usbgadget_resource,
+};
+EXPORT_SYMBOL(w90x900_device_usbgadget);
+
static struct map_desc w90p910_iodesc[] __initdata = {
};
static struct platform_device *w90p910evb_dev[] __initdata = {
&w90p910_serial_device,
&w90p910_flash_device,
+ &w90x900_device_usb_ehci,
+ &w90x900_device_usb_ohci,
+ &w90x900_device_ts,
+ &w90x900_device_rtc,
+ &w90x900_device_kpi,
+ &w90x900_device_usbgadget,
};
static void __init w90p910evb_map_io(void)
{
w90p910_map_io(w90p910_iodesc, ARRAY_SIZE(w90p910_iodesc));
- w90p910_init_clocks(0);
+ w90p910_init_clocks();
}
static void __init w90p910evb_init(void)
--- /dev/null
+/*
+ * linux/arch/arm/mach-w90x900/mfp-w90p910.c
+ *
+ * Copyright (c) 2008 Nuvoton technology corporation
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+
+#define REG_MFSEL (W90X900_VA_GCR + 0xC)
+
+#define GPSELF (0x01 << 1)
+
+#define GPSELC (0x03 << 2)
+#define ENKPI (0x02 << 2)
+#define ENNAND (0x01 << 2)
+
+#define GPSELEI0 (0x01 << 26)
+#define GPSELEI1 (0x01 << 27)
+
+static DECLARE_MUTEX(mfp_sem);
+
+void mfp_set_groupf(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ down(&mfp_sem);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "w90p910-emc") == 0)
+ mfpen |= GPSELF;/*enable mac*/
+ else
+ mfpen &= ~GPSELF;/*GPIOF[9:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupf);
+
+void mfp_set_groupc(struct device *dev)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ down(&mfp_sem);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "w90p910-lcd") == 0)
+ mfpen |= GPSELC;/*enable lcd*/
+ else if (strcmp(dev_id, "w90p910-kpi") == 0) {
+ mfpen &= (~GPSELC);/*enable kpi*/
+ mfpen |= ENKPI;
+ } else if (strcmp(dev_id, "w90p910-nand") == 0) {
+ mfpen &= (~GPSELC);/*enable nand*/
+ mfpen |= ENNAND;
+ } else
+ mfpen &= (~GPSELC);/*GPIOC[14:0]*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupc);
+
+void mfp_set_groupi(struct device *dev, int gpio)
+{
+ unsigned long mfpen;
+ const char *dev_id;
+
+ BUG_ON(!dev);
+
+ down(&mfp_sem);
+
+ dev_id = dev_name(dev);
+
+ mfpen = __raw_readl(REG_MFSEL);
+
+ if (strcmp(dev_id, "w90p910-wdog") == 0)
+ mfpen |= GPSELEI1;/*enable wdog*/
+ else if (strcmp(dev_id, "w90p910-atapi") == 0)
+ mfpen |= GPSELEI0;/*enable atapi*/
+
+ __raw_writel(mfpen, REG_MFSEL);
+
+ up(&mfp_sem);
+}
+EXPORT_SYMBOL(mfp_set_groupi);
+
*
* Based on linux/arch/arm/plat-s3c24xx/s3c244x.c by Ben Dooks
*
- * Copyright (c) 2008 Nuvoton technology corporation
- * All rights reserved.
+ * Copyright (c) 2008 Nuvoton technology corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
+ * the Free Software Foundation;version 2 of the License.
*
*/
#include <mach/regs-serial.h>
#include "cpu.h"
+#include "clock.h"
/* Initial IO mappings */
IODESC_ENT(UART),
IODESC_ENT(TIMER),
IODESC_ENT(EBI),
+ IODESC_ENT(USBEHCIHOST),
+ IODESC_ENT(USBOHCIHOST),
+ IODESC_ENT(ADC),
+ IODESC_ENT(RTC),
+ IODESC_ENT(KPI),
+ IODESC_ENT(USBDEV),
/*IODESC_ENT(LCD),*/
};
+/* Initial clock declarations. */
+static DEFINE_CLK(lcd, 0);
+static DEFINE_CLK(audio, 1);
+static DEFINE_CLK(fmi, 4);
+static DEFINE_CLK(dmac, 5);
+static DEFINE_CLK(atapi, 6);
+static DEFINE_CLK(emc, 7);
+static DEFINE_CLK(usbd, 8);
+static DEFINE_CLK(usbh, 9);
+static DEFINE_CLK(g2d, 10);;
+static DEFINE_CLK(pwm, 18);
+static DEFINE_CLK(ps2, 24);
+static DEFINE_CLK(kpi, 25);
+static DEFINE_CLK(wdt, 26);
+static DEFINE_CLK(gdma, 27);
+static DEFINE_CLK(adc, 28);
+static DEFINE_CLK(usi, 29);
+
+static struct clk_lookup w90p910_clkregs[] = {
+ DEF_CLKLOOK(&clk_lcd, "w90p910-lcd", NULL),
+ DEF_CLKLOOK(&clk_audio, "w90p910-audio", NULL),
+ DEF_CLKLOOK(&clk_fmi, "w90p910-fmi", NULL),
+ DEF_CLKLOOK(&clk_dmac, "w90p910-dmac", NULL),
+ DEF_CLKLOOK(&clk_atapi, "w90p910-atapi", NULL),
+ DEF_CLKLOOK(&clk_emc, "w90p910-emc", NULL),
+ DEF_CLKLOOK(&clk_usbd, "w90p910-usbd", NULL),
+ DEF_CLKLOOK(&clk_usbh, "w90p910-usbh", NULL),
+ DEF_CLKLOOK(&clk_g2d, "w90p910-g2d", NULL),
+ DEF_CLKLOOK(&clk_pwm, "w90p910-pwm", NULL),
+ DEF_CLKLOOK(&clk_ps2, "w90p910-ps2", NULL),
+ DEF_CLKLOOK(&clk_kpi, "w90p910-kpi", NULL),
+ DEF_CLKLOOK(&clk_wdt, "w90p910-wdt", NULL),
+ DEF_CLKLOOK(&clk_gdma, "w90p910-gdma", NULL),
+ DEF_CLKLOOK(&clk_adc, "w90p910-adc", NULL),
+ DEF_CLKLOOK(&clk_usi, "w90p910-usi", NULL),
+};
+
/* Initial serial platform data */
struct plat_serial8250_port w90p910_uart_data[] = {
/*Init W90P910 clock*/
-void __init w90p910_init_clocks(int xtal)
+void __init w90p910_init_clocks(void)
{
+ clks_register(w90p910_clkregs, ARRAY_SIZE(w90p910_clkregs));
}
static int __init w90p910_init_cpu(void)
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+ bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6
select CPU_ABRT_EV6
select CPU_PABRT_NOIFAR
# ARMv7
config CPU_V7
- bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+ bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
port must properly enable any big-endian related features
of your chipset/board/processor.
+config CPU_ENDIAN_BE8
+ bool
+ depends on CPU_BIG_ENDIAN
+ default CPU_V6 || CPU_V7
+ help
+ Support for the BE-8 (big-endian) mode on ARMv6 and ARMv7 processors.
+
+config CPU_ENDIAN_BE32
+ bool
+ depends on CPU_BIG_ENDIAN
+ default !CPU_ENDIAN_BE8
+ help
+ Support for the BE-32 (big-endian) mode on pre-ARMv6 processors.
+
config CPU_HIGH_VECTOR
depends on !MMU && CPU_CP15 && !CPU_ARM740T
bool "Select the High exception vector"
- default n
help
Say Y here to select high exception vector(0xFFFF0000~).
The exception vector can be vary depending on the platform
config OUTER_CACHE
bool
- default n
config CACHE_FEROCEON_L2
bool "Enable the Feroceon L2 cache controller"
config CACHE_FEROCEON_L2_WRITETHROUGH
bool "Force Feroceon L2 cache write through"
depends on CACHE_FEROCEON_L2
- default n
help
Say Y here to use the Feroceon L2 cache in writethrough mode.
Unless you specifically require this, say N for writeback mode.
config CACHE_L2X0
bool "Enable the L2x0 outer cache controller"
depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
- REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31
+ REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX
default y
select OUTER_CACHE
help
movne pc, lr
do_thumb_abort
ldreq r3, [r2] @ read aborted ARM instruction
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ reveq r3, r3
+#endif
do_ldrd_abort
tst r3, #1 << 20 @ L = 0 -> write
orreq r1, r1, #1 << 11 @ yes.
return err;
}
+int ioremap_page(unsigned long virt, unsigned long phys,
+ const struct mem_type *mtype)
+{
+ return remap_area_pages(virt, __phys_to_pfn(phys), PAGE_SIZE, mtype);
+}
+EXPORT_SYMBOL(ioremap_page);
void __check_kvm_seq(struct mm_struct *mm)
{
{
return type < ARRAY_SIZE(mem_types) ? &mem_types[type] : NULL;
}
+EXPORT_SYMBOL(get_mem_type);
/*
* Adjust the PMD section entries according to the CPU in use.
#endif /* CONFIG_MMU */
adr r5, v6_crval
ldmia r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ orr r6, r6, #1 << 25 @ big-endian page tables
+#endif
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
#include "proc-macros.S"
-#define TTB_C (1 << 0)
#define TTB_S (1 << 1)
#define TTB_RGN_NC (0 << 3)
#define TTB_RGN_OC_WBWA (1 << 3)
#define TTB_RGN_OC_WT (2 << 3)
#define TTB_RGN_OC_WB (3 << 3)
+#define TTB_NOS (1 << 5)
+#define TTB_IRGN_NC ((0 << 0) | (0 << 6))
+#define TTB_IRGN_WBWA ((0 << 0) | (1 << 6))
+#define TTB_IRGN_WT ((1 << 0) | (0 << 6))
+#define TTB_IRGN_WB ((1 << 0) | (1 << 6))
#ifndef CONFIG_SMP
-#define TTB_FLAGS TTB_C|TTB_RGN_OC_WB @ mark PTWs cacheable, outer WB
+/* PTWs cacheable, inner WB not shareable, outer WB not shareable */
+#define TTB_FLAGS TTB_IRGN_WB|TTB_RGN_OC_WB
#else
-#define TTB_FLAGS TTB_C|TTB_S|TTB_RGN_OC_WBWA @ mark PTWs cacheable and shared, outer WBWA
+/* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
+#define TTB_FLAGS TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
#endif
ENTRY(cpu_v7_proc_init)
*/
__v7_setup:
#ifdef CONFIG_SMP
- mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode
- orr r0, r0, #(0x1 << 6)
+ mrc p15, 0, r0, c1, c0, 1 @ Enable SMP/nAMP mode and
+ orr r0, r0, #(1 << 6) | (1 << 0) @ TLB ops broadcasting
mcr p15, 0, r0, c1, c0, 1
#endif
adr r12, __v7_setup_stack @ the local stack
mov r10, #0x1f @ domains 0, 1 = manager
mcr p15, 0, r10, c3, c0, 0 @ load domain access register
#endif
- ldr r5, =0xff0aa1a8
- ldr r6, =0x40e040e0
+ /*
+ * Memory region attributes with SCTLR.TRE=1
+ *
+ * n = TEX[0],C,B
+ * TR = PRRR[2n+1:2n] - memory type
+ * IR = NMRR[2n+1:2n] - inner cacheable property
+ * OR = NMRR[2n+17:2n+16] - outer cacheable property
+ *
+ * n TR IR OR
+ * UNCACHED 000 00
+ * BUFFERABLE 001 10 00 00
+ * WRITETHROUGH 010 10 10 10
+ * WRITEBACK 011 10 11 11
+ * reserved 110
+ * WRITEALLOC 111 10 01 01
+ * DEV_SHARED 100 01
+ * DEV_NONSHARED 100 01
+ * DEV_WC 001 10
+ * DEV_CACHED 011 10
+ *
+ * Other attributes:
+ *
+ * DS0 = PRRR[16] = 0 - device shareable property
+ * DS1 = PRRR[17] = 1 - device shareable property
+ * NS0 = PRRR[18] = 0 - normal shareable property
+ * NS1 = PRRR[19] = 1 - normal shareable property
+ * NOS = PRRR[24+n] = 1 - not outer shareable
+ */
+ ldr r5, =0xff0a81a8 @ PRRR
+ ldr r6, =0x40e040e0 @ NMRR
mcr p15, 0, r5, c10, c2, 0 @ write PRRR
mcr p15, 0, r6, c10, c2, 1 @ write NMRR
adr r5, v7_crval
ldmia r5, {r5, r6}
+#ifdef CONFIG_CPU_ENDIAN_BE8
+ orr r6, r6, #1 << 25 @ big-endian page tables
+#endif
mrc p15, 0, r0, c1, c0, 0 @ read control register
bic r0, r0, r5 @ clear bits them
orr r0, r0, r6 @ set them
ENDPROC(__v7_setup)
/* AT
- * TFR EV X F I D LR
- * .EEE ..EE PUI. .T.T 4RVI ZFRS BLDP WCAM
+ * TFR EV X F I D LR S
+ * .EEE ..EE PUI. .T.T 4RVI ZWRS BLDP WCAM
* rxxx rrxx xxx0 0101 xxxx xxxx x111 xxxx < forced
- * 1 0 110 0011 1.00 .111 1101 < we want
+ * 1 0 110 0011 1100 .111 1101 < we want
*/
.type v7_crval, #object
v7_crval:
- crval clear=0x0120c302, mmuset=0x10c0387d, ucset=0x00c0187c
+ crval clear=0x0120c302, mmuset=0x10c03c7d, ucset=0x00c01c7c
__v7_setup_stack:
.space 4 * 11 @ 11 registers
mov r1, r1, lsl #PAGE_SHIFT
vma_vm_flags r2, r2 @ get vma->vm_flags
1:
- mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA (was 1)
- tst r2, #VM_EXEC @ Executable area ?
- mcrne p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA (was 1)
+#ifdef CONFIG_SMP
+ mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable)
+#else
+ mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA
+#endif
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
mov r0, r0, lsl #PAGE_SHIFT
mov r1, r1, lsl #PAGE_SHIFT
1:
- mcr p15, 0, r0, c8, c6, 1 @ TLB invalidate D MVA
- mcr p15, 0, r0, c8, c5, 1 @ TLB invalidate I MVA
+#ifdef CONFIG_SMP
+ mcr p15, 0, r0, c8, c3, 1 @ TLB invalidate U MVA (shareable)
+#else
+ mcr p15, 0, r0, c8, c7, 1 @ TLB invalidate U MVA
+#endif
add r0, r0, #PAGE_SZ
cmp r0, r1
blo 1b
ENTRY(v7wbi_tlb_fns)
.long v7wbi_flush_user_tlb_range
.long v7wbi_flush_kern_tlb_range
- .long v6wbi_tlb_flags
+ .long v7wbi_tlb_flags
.size v7wbi_tlb_fns, . - v7wbi_tlb_fns
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
+#include <mach/board-eb.h>
#include <asm/system.h>
#include "op_counter.h"
config MXC_PWM
tristate "Enable PWM driver"
depends on ARCH_MXC
+ select HAVE_PWM
help
Enable support for the i.MX PWM controller(s).
+config ARCH_HAS_RNGA
+ bool
+ depends on ARCH_MXC
+
+config ARCH_MXC_IOMUX_V3
+ bool
endif
obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
+obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
obj-$(CONFIG_MXC_PWM) += pwm.o
_set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1);
}
+static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset);
+
static int gpio_set_irq_type(u32 irq, u32 type)
{
u32 gpio = irq_to_gpio(irq);
int edge;
void __iomem *reg = port->base;
+ port->both_edges &= ~(1 << (gpio & 31));
switch (type) {
case IRQ_TYPE_EDGE_RISING:
edge = GPIO_INT_RISE_EDGE;
case IRQ_TYPE_EDGE_FALLING:
edge = GPIO_INT_FALL_EDGE;
break;
+ case IRQ_TYPE_EDGE_BOTH:
+ val = mxc_gpio_get(&port->chip, gpio & 31);
+ if (val) {
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: set GPIO %d to low trigger\n", gpio);
+ } else {
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: set GPIO %d to high trigger\n", gpio);
+ }
+ port->both_edges |= 1 << (gpio & 31);
+ break;
case IRQ_TYPE_LEVEL_LOW:
edge = GPIO_INT_LOW_LEV;
break;
case IRQ_TYPE_LEVEL_HIGH:
edge = GPIO_INT_HIGH_LEV;
break;
- default: /* this includes IRQ_TYPE_EDGE_BOTH */
+ default:
return -EINVAL;
}
return 0;
}
+static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
+{
+ void __iomem *reg = port->base;
+ u32 bit, val;
+ int edge;
+
+ reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
+ bit = gpio & 0xf;
+ val = __raw_readl(reg);
+ edge = (val >> (bit << 1)) & 3;
+ val &= ~(0x3 << (bit << 1));
+ switch (edge) {
+ case GPIO_INT_HIGH_LEV:
+ edge = GPIO_INT_LOW_LEV;
+ pr_debug("mxc: switch GPIO %d to low trigger\n", gpio);
+ break;
+ case GPIO_INT_LOW_LEV:
+ edge = GPIO_INT_HIGH_LEV;
+ pr_debug("mxc: switch GPIO %d to high trigger\n", gpio);
+ break;
+ default:
+ pr_err("mxc: invalid configuration for GPIO %d: %x\n",
+ gpio, edge);
+ return;
+ }
+ __raw_writel(val | (edge << (bit << 1)), reg);
+}
+
/* handle n interrupts in one status register */
static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat)
{
gpio_irq_no = port->virtual_irq_start;
for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) {
+ u32 gpio = irq_to_gpio(gpio_irq_no);
if ((irq_stat & 1) == 0)
continue;
BUG_ON(!(irq_desc[gpio_irq_no].handle_irq));
+
+ if (port->both_edges & (1 << (gpio & 31)))
+ mxc_flip_edge(port, gpio);
+
irq_desc[gpio_irq_no].handle_irq(gpio_irq_no,
&irq_desc[gpio_irq_no]);
}
--- /dev/null
+/*
+ * Copyright 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>.
+ * All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+#define __ASM_ARCH_MXC_BOARD_ARMADILLO5X0_H__
+
+#include <mach/hardware.h>
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif
--- /dev/null
+/*
+ * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+#define __ASM_ARCH_MXC_BOARD_MX21ADS_H__
+
+/*
+ * MXC UART EVB board level configurations
+ */
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPI_IO_ADDRESS(UART1_BASE_ADDR)
+
+/*
+ * Memory-mapped I/O on MX21ADS base board
+ */
+#define MX21ADS_MMIO_BASE_ADDR 0xF5000000
+#define MX21ADS_MMIO_SIZE SZ_16M
+
+#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
+ (MX21ADS_MMIO_BASE_ADDR + (offset))
+
+#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11)
+#define MX21ADS_CS8900A_IOBASE_REG MX21ADS_REG_ADDR(0x000000)
+#define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000)
+#define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000)
+#define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000)
+
+/* MX21ADS_IO_REG bit definitions */
+#define MX21ADS_IO_SD_WP 0x0001 /* read */
+#define MX21ADS_IO_TP6 0x0001 /* write */
+#define MX21ADS_IO_SW_SEL 0x0002 /* read */
+#define MX21ADS_IO_TP7 0x0002 /* write */
+#define MX21ADS_IO_RESET_E_UART 0x0004
+#define MX21ADS_IO_RESET_BASE 0x0008
+#define MX21ADS_IO_CSI_CTL2 0x0010
+#define MX21ADS_IO_CSI_CTL1 0x0020
+#define MX21ADS_IO_CSI_CTL0 0x0040
+#define MX21ADS_IO_UART1_EN 0x0080
+#define MX21ADS_IO_UART4_EN 0x0100
+#define MX21ADS_IO_LCDON 0x0200
+#define MX21ADS_IO_IRDA_EN 0x0400
+#define MX21ADS_IO_IRDA_FIR_SEL 0x0800
+#define MX21ADS_IO_IRDA_MD0_B 0x1000
+#define MX21ADS_IO_IRDA_MD1 0x2000
+#define MX21ADS_IO_LED4_ON 0x4000
+#define MX21ADS_IO_LED3_ON 0x8000
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX21ADS_H__ */
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX27LITE_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27LITE_H__ */
--- /dev/null
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX27PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX27PDK_H__ */
#define MXC_MAX_EXP_IO_LINES 16
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
--- /dev/null
+/*
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ * Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LILLY_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
+
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
+
+#ifndef __ASSEMBLY__
+
+enum mx31lilly_boards {
+ MX31LILLY_NOBOARD = 0,
+ MX31LILLY_DB = 1,
+};
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ */
+
+extern void mx31lilly_db_init(void);
+
+#endif
+
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LILLY_H__ */
#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define MXC_MAX_EXP_IO_LINES 16
-
-
-/*
- * Memory Size parameters
- */
-
-/*
- * Size of SDRAM memory
- */
-#define SDRAM_MEM_SIZE SZ_128M
-/*
- * Size of MBX buffer memory
- */
-#define MXC_MBX_MEM_SIZE SZ_16M
-/*
- * Size of memory available to kernel
- */
-#define MEM_SIZE (SDRAM_MEM_SIZE - MXC_MBX_MEM_SIZE)
-
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-#endif /* __ASM_ARCH_MXC_BOARD_MX31ADS_H__ */
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
#ifndef __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
#define __ASM_ARCH_MXC_BOARD_MX31MOBOARD_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__
#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+/* Definitions for components on the Debug board */
+
+/* Base address of CPLD controller on the Debug board */
+#define DEBUG_BASE_ADDRESS CS5_IO_ADDRESS(CS5_BASE_ADDR)
+
+/* LAN9217 ethernet base address */
+#define LAN9217_BASE_ADDR CS5_BASE_ADDR
+
+/* CPLD config and interrupt base address */
+#define CPLD_ADDR (DEBUG_BASE_ADDRESS + 0x20000)
+
+/* LED switchs */
+#define CPLD_LED_REG (CPLD_ADDR + 0x00)
+/* buttons */
+#define CPLD_SWITCH_BUTTONS_REG (EXPIO_ADDR + 0x08)
+/* status, interrupt */
+#define CPLD_INT_STATUS_REG (CPLD_ADDR + 0x10)
+#define CPLD_INT_MASK_REG (CPLD_ADDR + 0x38)
+#define CPLD_INT_RESET_REG (CPLD_ADDR + 0x20)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER1_REG (CPLD_ADDR + 0x40)
+#define CPLD_MAGIC_NUMBER2_REG (CPLD_ADDR + 0x48)
+/* CPLD code version */
+#define CPLD_CODE_VER_REG (CPLD_ADDR + 0x50)
+/* magic word for debug CPLD */
+#define CPLD_MAGIC_NUMBER3_REG (CPLD_ADDR + 0x58)
+/* module reset register */
+#define CPLD_MODULE_RESET_REG (CPLD_ADDR + 0x60)
+/* CPU ID and Personality ID */
+#define CPLD_MCU_BOARD_ID_REG (CPLD_ADDR + 0x68)
+
+/* CPLD IRQ line for external uart, external ethernet etc */
+#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1)
+
+#define MXC_EXP_IO_BASE (MXC_BOARD_IRQ_START)
+#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE)
+
+#define EXPIO_INT_ENET (MXC_EXP_IO_BASE + 0)
+#define EXPIO_INT_XUART_A (MXC_EXP_IO_BASE + 1)
+#define EXPIO_INT_XUART_B (MXC_EXP_IO_BASE + 2)
+#define EXPIO_INT_BUTTON_A (MXC_EXP_IO_BASE + 3)
+#define EXPIO_INT_BUTTON_B (MXC_EXP_IO_BASE + 4)
+
+#define MXC_MAX_EXP_IO_LINES 16
+
#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */
/*
- * arch/arm/mach-imxads/include/mach/io.h
- *
- * Copyright (C) 1999 ARM Limited
+ * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __ASM_ARM_ARCH_IO_H
-#define __ASM_ARM_ARCH_IO_H
-#define IO_SPACE_LIMIT 0xffffffff
+#ifndef __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+#define __ASM_ARCH_MXC_BOARD_MX35PDK_H__
+
+/* mandatory for CONFIG_DEBUG_LL */
-#define __io(a) __typesafe_io(a)
-#define __mem_pci(a) (a)
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-#endif
+#endif /* __ASM_ARCH_MXC_BOARD_MX35PDK_H__ */
#ifndef __ASM_ARCH_MXC_BOARD_PCM037_H__
#define __ASM_ARCH_MXC_BOARD_PCM037_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
#ifndef __ASM_ARCH_MXC_BOARD_PCM038_H__
#define __ASM_ARCH_MXC_BOARD_PCM038_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR (AIPI_BASE_ADDR_VIRT + 0x0A000)
/*
- * linux/include/asm-arm/imx/timex.h
- *
- * Copyright (C) 1999 ARM Limited
+ * Copyright (C) 2008 Sascha Hauer, Pengutronix
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
+#ifndef __ASM_ARCH_MXC_BOARD_PCM043_H__
+#define __ASM_ARCH_MXC_BOARD_PCM043_H__
+
+/* mandatory for CONFIG_LL_DEBUG */
-#define CLOCK_TICK_RATE (16000000)
+#define MXC_LL_UART_PADDR UART1_BASE_ADDR
+#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
-#endif
+#endif /* __ASM_ARCH_MXC_BOARD_PCM043_H__ */
#ifndef __ASM_ARCH_MXC_BOARD_QONG_H__
#define __ASM_ARCH_MXC_BOARD_QONG_H__
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
struct platform_device;
struct clk;
-extern void mxc_map_io(void);
+extern void mx1_map_io(void);
+extern void mx21_map_io(void);
+extern void mx27_map_io(void);
+extern void mx31_map_io(void);
+extern void mx35_map_io(void);
extern void mxc_init_irq(void);
extern void mxc_timer_init(struct clk *timer_clk);
extern int mx1_clocks_init(unsigned long fref);
#ifdef CONFIG_MACH_MX27ADS
#include <mach/board-mx27ads.h>
#endif
+#ifdef CONFIG_MACH_MX21ADS
+#include <mach/board-mx21ads.h>
+#endif
#ifdef CONFIG_MACH_PCM038
#include <mach/board-pcm038.h>
#endif
#endif
#ifdef CONFIG_MACH_QONG
#include <mach/board-qong.h>
+#endif
+#ifdef CONFIG_MACH_PCM043
+#include <mach/board-pcm043.h>
+#endif
+#ifdef CONFIG_MACH_MX27_3DS
+#include <mach/board-mx27pdk.h>
+#endif
+#ifdef CONFIG_MACH_ARMADILLO5X0
+#include <mach/board-armadillo5x0.h>
+#endif
+#ifdef CONFIG_MACH_MX35_3DS
+#include <mach/board-mx35pdk.h>
+#endif
+#ifdef CONFIG_MACH_MX27LITE
+#include <mach/board-mx27lite.h>
#endif
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
int irq;
int virtual_irq_start;
struct gpio_chip chip;
+ u32 both_edges;
};
int mxc_gpio_init(struct mxc_gpio_port*, int);
struct imxuart_platform_data {
int (*init)(struct platform_device *pdev);
- int (*exit)(struct platform_device *pdev);
+ void (*exit)(struct platform_device *pdev);
unsigned int flags;
};
u_char * fixed_screen_cpu;
dma_addr_t fixed_screen_dma;
- int (*init)(struct platform_device*);
- int (*exit)(struct platform_device*);
+ int (*init)(struct platform_device *);
+ void (*exit)(struct platform_device *);
void (*lcd_power)(int);
void (*backlight_power)(int);
* - setups the iomux according to the configuration
* - if the pin is configured as a GPIO, we claim it throug kernel gpiolib
*/
-int mxc_iomux_setup_pin(const unsigned int pin, const char *label);
+int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
/*
* setups mutliple pins
* convenient way to call the above function with tables
#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USB_OC__GPIO1_30 IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_DAT__I2C1_SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_CLK__I2C1_SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
--- /dev/null
+/*
+ * Copyright (C, NO_PAD_CTRL) 2009 by Jan Weitzel Phytec Messtechnik GmbH <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option, NO_PAD_CTRL) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_MX35_H__
+#define __MACH_IOMUX_MX35_H__
+
+#include <mach/iomux-v3.h>
+
+/*
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num> see also iomux-v3.h
+ */
+
+/* PAD MUX ALT INPSE PATH */
+#define MX35_PAD_CAPTURE__GPT_CAPIN1 IOMUX_PAD(0x328, 0x004, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPT_CMPOUT2 IOMUX_PAD(0x328, 0x004, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CSPI2_SS1 IOMUX_PAD(0x328, 0x004, 2, 0x7f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__EPIT1_EPITO IOMUX_PAD(0x328, 0x004, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__CCM_CLK32K IOMUX_PAD(0x328, 0x004, 4, 0x7d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CAPTURE__GPIO1_4 IOMUX_PAD(0x328, 0x004, 5, 0x850, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_COMPARE__GPT_CMPOUT1 IOMUX_PAD(0x32c, 0x008, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CAPIN2 IOMUX_PAD(0x32c, 0x008, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPT_CMPOUT3 IOMUX_PAD(0x32c, 0x008, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__EPIT2_EPITO IOMUX_PAD(0x32c, 0x008, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__GPIO1_5 IOMUX_PAD(0x32c, 0x008, 5, 0x854, 0, NO_PAD_CTRL)
+#define MX35_PAD_COMPARE__SDMA_EXTDMA_2 IOMUX_PAD(0x32c, 0x008, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_WDOG_RST__WDOG_WDOG_B IOMUX_PAD(0x330, 0x00c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__IPU_FLASH_STROBE IOMUX_PAD(0x330, 0x00c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_WDOG_RST__GPIO1_6 IOMUX_PAD(0x330, 0x00c, 5, 0x858, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_0__GPIO1_0 IOMUX_PAD(0x334, 0x010, 0, 0x82c, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__CCM_PMIC_RDY IOMUX_PAD(0x334, 0x010, 1, 0x7d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__OWIRE_LINE IOMUX_PAD(0x334, 0x010, 2, 0x990, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 IOMUX_PAD(0x334, 0x010, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO1_1__GPIO1_1 IOMUX_PAD(0x338, 0x014, 0, 0x838, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__PWM_PWMO IOMUX_PAD(0x338, 0x014, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__CSPI1_SS2 IOMUX_PAD(0x338, 0x014, 3, 0x7d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT IOMUX_PAD(0x338, 0x014, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 IOMUX_PAD(0x338, 0x014, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO2_0__GPIO2_0 IOMUX_PAD(0x33c, 0x018, 0, 0x868, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK IOMUX_PAD(0x33c, 0x018, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_GPIO3_0__GPIO3_0 IOMUX_PAD(0x340, 0x01c, 0, 0x8e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK IOMUX_PAD(0x340, 0x01c, 1, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RESET_IN_B__CCM_RESET_IN_B IOMUX_PAD(0x344, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_POR_B__CCM_POR_B IOMUX_PAD(0x348, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLKO__CCM_CLKO IOMUX_PAD(0x34c, 0x020, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CLKO__GPIO1_8 IOMUX_PAD(0x34c, 0x020, 5, 0x860, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 IOMUX_PAD(0x350, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 IOMUX_PAD(0x354, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 IOMUX_PAD(0x358, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 IOMUX_PAD(0x35c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 IOMUX_PAD(0x360, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_VSTBY__CCM_VSTBY IOMUX_PAD(0x364, 0x024, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_VSTBY__GPIO1_7 IOMUX_PAD(0x364, 0x024, 5, 0x85c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A0__EMI_EIM_DA_L_0 IOMUX_PAD(0x368, 0x028, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A1__EMI_EIM_DA_L_1 IOMUX_PAD(0x36c, 0x02c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A2__EMI_EIM_DA_L_2 IOMUX_PAD(0x370, 0x030, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A3__EMI_EIM_DA_L_3 IOMUX_PAD(0x374, 0x034, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A4__EMI_EIM_DA_L_4 IOMUX_PAD(0x378, 0x038, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A5__EMI_EIM_DA_L_5 IOMUX_PAD(0x37c, 0x03c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A6__EMI_EIM_DA_L_6 IOMUX_PAD(0x380, 0x040, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A7__EMI_EIM_DA_L_7 IOMUX_PAD(0x384, 0x044, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A8__EMI_EIM_DA_H_8 IOMUX_PAD(0x388, 0x048, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A9__EMI_EIM_DA_H_9 IOMUX_PAD(0x38c, 0x04c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A10__EMI_EIM_DA_H_10 IOMUX_PAD(0x390, 0x050, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MA10__EMI_MA10 IOMUX_PAD(0x394, 0x054, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A11__EMI_EIM_DA_H_11 IOMUX_PAD(0x398, 0x058, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A12__EMI_EIM_DA_H_12 IOMUX_PAD(0x39c, 0x05c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A13__EMI_EIM_DA_H_13 IOMUX_PAD(0x3a0, 0x060, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A14__EMI_EIM_DA_H2_14 IOMUX_PAD(0x3a4, 0x064, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A15__EMI_EIM_DA_H2_15 IOMUX_PAD(0x3a8, 0x068, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A16__EMI_EIM_A_16 IOMUX_PAD(0x3ac, 0x06c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A17__EMI_EIM_A_17 IOMUX_PAD(0x3b0, 0x070, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A18__EMI_EIM_A_18 IOMUX_PAD(0x3b4, 0x074, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A19__EMI_EIM_A_19 IOMUX_PAD(0x3b8, 0x078, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A20__EMI_EIM_A_20 IOMUX_PAD(0x3bc, 0x07c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A21__EMI_EIM_A_21 IOMUX_PAD(0x3c0, 0x080, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A22__EMI_EIM_A_22 IOMUX_PAD(0x3c4, 0x084, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A23__EMI_EIM_A_23 IOMUX_PAD(0x3c8, 0x088, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A24__EMI_EIM_A_24 IOMUX_PAD(0x3cc, 0x08c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_A25__EMI_EIM_A_25 IOMUX_PAD(0x3d0, 0x090, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA1__EMI_EIM_SDBA1 IOMUX_PAD(0x3d4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDBA0__EMI_EIM_SDBA0 IOMUX_PAD(0x3d8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD0__EMI_DRAM_D_0 IOMUX_PAD(0x3dc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1__EMI_DRAM_D_1 IOMUX_PAD(0x3e0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2__EMI_DRAM_D_2 IOMUX_PAD(0x3e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD3__EMI_DRAM_D_3 IOMUX_PAD(0x3e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD4__EMI_DRAM_D_4 IOMUX_PAD(0x3ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD5__EMI_DRAM_D_5 IOMUX_PAD(0x3f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD6__EMI_DRAM_D_6 IOMUX_PAD(0x3f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD7__EMI_DRAM_D_7 IOMUX_PAD(0x3f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD8__EMI_DRAM_D_8 IOMUX_PAD(0x3fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD9__EMI_DRAM_D_9 IOMUX_PAD(0x400, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD10__EMI_DRAM_D_10 IOMUX_PAD(0x404, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD11__EMI_DRAM_D_11 IOMUX_PAD(0x408, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD12__EMI_DRAM_D_12 IOMUX_PAD(0x40c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD13__EMI_DRAM_D_13 IOMUX_PAD(0x410, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD14__EMI_DRAM_D_14 IOMUX_PAD(0x414, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD15__EMI_DRAM_D_15 IOMUX_PAD(0x418, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD16__EMI_DRAM_D_16 IOMUX_PAD(0x41c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD17__EMI_DRAM_D_17 IOMUX_PAD(0x420, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD18__EMI_DRAM_D_18 IOMUX_PAD(0x424, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD19__EMI_DRAM_D_19 IOMUX_PAD(0x428, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD20__EMI_DRAM_D_20 IOMUX_PAD(0x42c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD21__EMI_DRAM_D_21 IOMUX_PAD(0x430, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD22__EMI_DRAM_D_22 IOMUX_PAD(0x434, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD23__EMI_DRAM_D_23 IOMUX_PAD(0x438, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD24__EMI_DRAM_D_24 IOMUX_PAD(0x43c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD25__EMI_DRAM_D_25 IOMUX_PAD(0x440, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD26__EMI_DRAM_D_26 IOMUX_PAD(0x444, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD27__EMI_DRAM_D_27 IOMUX_PAD(0x448, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD28__EMI_DRAM_D_28 IOMUX_PAD(0x44c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD29__EMI_DRAM_D_29 IOMUX_PAD(0x450, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD30__EMI_DRAM_D_30 IOMUX_PAD(0x454, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD31__EMI_DRAM_D_31 IOMUX_PAD(0x458, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM0__EMI_DRAM_DQM_0 IOMUX_PAD(0x45c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM1__EMI_DRAM_DQM_1 IOMUX_PAD(0x460, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM2__EMI_DRAM_DQM_2 IOMUX_PAD(0x464, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DQM3__EMI_DRAM_DQM_3 IOMUX_PAD(0x468, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB0__EMI_EIM_EB0_B IOMUX_PAD(0x46c, 0x094, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EB1__EMI_EIM_EB1_B IOMUX_PAD(0x470, 0x098, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_OE__EMI_EIM_OE IOMUX_PAD(0x474, 0x09c, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS0__EMI_EIM_CS0 IOMUX_PAD(0x478, 0x0a0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS1__EMI_EIM_CS1 IOMUX_PAD(0x47c, 0x0a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS1__EMI_NANDF_CE3 IOMUX_PAD(0x47c, 0x0a4, 3, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS2__EMI_EIM_CS2 IOMUX_PAD(0x480, 0x0a8, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS3__EMI_EIM_CS3 IOMUX_PAD(0x484, 0x0ac, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS4__EMI_EIM_CS4 IOMUX_PAD(0x488, 0x0b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_DTACK_B IOMUX_PAD(0x488, 0x0b0, 1, 0x800, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__EMI_NANDF_CE1 IOMUX_PAD(0x488, 0x0b0, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS4__GPIO1_20 IOMUX_PAD(0x488, 0x0b0, 5, 0x83c, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CS5__EMI_EIM_CS5 IOMUX_PAD(0x48c, 0x0b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI2_SS2 IOMUX_PAD(0x48c, 0x0b4, 1, 0x7f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__CSPI1_SS2 IOMUX_PAD(0x48c, 0x0b4, 2, 0x7d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_CS5__EMI_NANDF_CE2 IOMUX_PAD(0x48c, 0x0b4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CS5__GPIO1_21 IOMUX_PAD(0x48c, 0x0b4, 5, 0x840, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NF_CE0__EMI_NANDF_CE0 IOMUX_PAD(0x490, 0x0b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NF_CE0__GPIO1_22 IOMUX_PAD(0x490, 0x0b8, 5, 0x844, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ECB__EMI_EIM_ECB IOMUX_PAD(0x494, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LBA__EMI_EIM_LBA IOMUX_PAD(0x498, 0x0bc, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_BCLK__EMI_EIM_BCLK IOMUX_PAD(0x49c, 0x0c0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RW__EMI_EIM_RW IOMUX_PAD(0x4a0, 0x0c4, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RAS__EMI_DRAM_RAS IOMUX_PAD(0x4a4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CAS__EMI_DRAM_CAS IOMUX_PAD(0x4a8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDWE__EMI_DRAM_SDWE IOMUX_PAD(0x4ac, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 IOMUX_PAD(0x4b0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 IOMUX_PAD(0x4b4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDCLK__EMI_DRAM_SDCLK IOMUX_PAD(0x4b8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 IOMUX_PAD(0x4bc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 IOMUX_PAD(0x4c0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 IOMUX_PAD(0x4c4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 IOMUX_PAD(0x4c8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWE_B__EMI_NANDF_WE_B IOMUX_PAD(0x4cc, 0x0c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x4cc, 0x0c8, 1, 0x9d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x4cc, 0x0c8, 2, 0x924, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__GPIO2_18 IOMUX_PAD(0x4cc, 0x0c8, 5, 0x88c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 IOMUX_PAD(0x4cc, 0x0c8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRE_B__EMI_NANDF_RE_B IOMUX_PAD(0x4d0, 0x0cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR IOMUX_PAD(0x4d0, 0x0cc, 1, 0x9ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__IPU_DISPB_BCLK IOMUX_PAD(0x4d0, 0x0cc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__GPIO2_19 IOMUX_PAD(0x4d0, 0x0cc, 5, 0x890, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 IOMUX_PAD(0x4d0, 0x0cc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFALE__EMI_NANDF_ALE IOMUX_PAD(0x4d4, 0x0d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__USB_TOP_USBH2_STP IOMUX_PAD(0x4d4, 0x0d0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__IPU_DISPB_CS0 IOMUX_PAD(0x4d4, 0x0d0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__GPIO2_20 IOMUX_PAD(0x4d4, 0x0d0, 5, 0x898, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 IOMUX_PAD(0x4d4, 0x0d0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFCLE__EMI_NANDF_CLE IOMUX_PAD(0x4d8, 0x0d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__USB_TOP_USBH2_NXT IOMUX_PAD(0x4d8, 0x0d4, 1, 0x9f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__IPU_DISPB_PAR_RS IOMUX_PAD(0x4d8, 0x0d4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__GPIO2_21 IOMUX_PAD(0x4d8, 0x0d4, 5, 0x89c, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 IOMUX_PAD(0x4d8, 0x0d4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFWP_B__EMI_NANDF_WP_B IOMUX_PAD(0x4dc, 0x0d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x4dc, 0x0d8, 1, 0x9e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__IPU_DISPB_WR IOMUX_PAD(0x4dc, 0x0d8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__GPIO2_22 IOMUX_PAD(0x4dc, 0x0d8, 5, 0x8a0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL IOMUX_PAD(0x4dc, 0x0d8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_NFRB__EMI_NANDF_RB IOMUX_PAD(0x4e0, 0x0dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__IPU_DISPB_RD IOMUX_PAD(0x4e0, 0x0dc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__GPIO2_23 IOMUX_PAD(0x4e0, 0x0dc, 5, 0x8a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_NFRB__ARM11P_TOP_TRCLK IOMUX_PAD(0x4e0, 0x0dc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D15__EMI_EIM_D_15 IOMUX_PAD(0x4e4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D14__EMI_EIM_D_14 IOMUX_PAD(0x4e8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D13__EMI_EIM_D_13 IOMUX_PAD(0x4ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D12__EMI_EIM_D_12 IOMUX_PAD(0x4f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D11__EMI_EIM_D_11 IOMUX_PAD(0x4f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D10__EMI_EIM_D_10 IOMUX_PAD(0x4f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D9__EMI_EIM_D_9 IOMUX_PAD(0x4fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D8__EMI_EIM_D_8 IOMUX_PAD(0x500, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D7__EMI_EIM_D_7 IOMUX_PAD(0x504, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D6__EMI_EIM_D_6 IOMUX_PAD(0x508, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D5__EMI_EIM_D_5 IOMUX_PAD(0x50c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D4__EMI_EIM_D_4 IOMUX_PAD(0x510, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3__EMI_EIM_D_3 IOMUX_PAD(0x514, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D2__EMI_EIM_D_2 IOMUX_PAD(0x518, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D1__EMI_EIM_D_1 IOMUX_PAD(0x51c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D0__EMI_EIM_D_0 IOMUX_PAD(0x520, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D8__IPU_CSI_D_8 IOMUX_PAD(0x524, 0x0e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__KPP_COL_0 IOMUX_PAD(0x524, 0x0e0, 1, 0x950, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__GPIO1_20 IOMUX_PAD(0x524, 0x0e0, 5, 0x83c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 IOMUX_PAD(0x524, 0x0e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D9__IPU_CSI_D_9 IOMUX_PAD(0x528, 0x0e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__KPP_COL_1 IOMUX_PAD(0x528, 0x0e4, 1, 0x954, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__GPIO1_21 IOMUX_PAD(0x528, 0x0e4, 5, 0x840, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 IOMUX_PAD(0x528, 0x0e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D10__IPU_CSI_D_10 IOMUX_PAD(0x52c, 0x0e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__KPP_COL_2 IOMUX_PAD(0x52c, 0x0e8, 1, 0x958, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__GPIO1_22 IOMUX_PAD(0x52c, 0x0e8, 5, 0x844, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 IOMUX_PAD(0x52c, 0x0e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D11__IPU_CSI_D_11 IOMUX_PAD(0x530, 0x0ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__KPP_COL_3 IOMUX_PAD(0x530, 0x0ec, 1, 0x95c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D11__GPIO1_23 IOMUX_PAD(0x530, 0x0ec, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D12__IPU_CSI_D_12 IOMUX_PAD(0x534, 0x0f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__KPP_ROW_0 IOMUX_PAD(0x534, 0x0f0, 1, 0x970, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D12__GPIO1_24 IOMUX_PAD(0x534, 0x0f0, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D13__IPU_CSI_D_13 IOMUX_PAD(0x538, 0x0f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__KPP_ROW_1 IOMUX_PAD(0x538, 0x0f4, 1, 0x974, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D13__GPIO1_25 IOMUX_PAD(0x538, 0x0f4, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D14__IPU_CSI_D_14 IOMUX_PAD(0x53c, 0x0f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__KPP_ROW_2 IOMUX_PAD(0x53c, 0x0f8, 1, 0x978, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D14__GPIO1_26 IOMUX_PAD(0x53c, 0x0f8, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_D15__IPU_CSI_D_15 IOMUX_PAD(0x540, 0x0fc, 0, 0x97c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__KPP_ROW_3 IOMUX_PAD(0x540, 0x0fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_D15__GPIO1_27 IOMUX_PAD(0x540, 0x0fc, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_MCLK__IPU_CSI_MCLK IOMUX_PAD(0x544, 0x100, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_MCLK__GPIO1_28 IOMUX_PAD(0x544, 0x100, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC IOMUX_PAD(0x548, 0x104, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_VSYNC__GPIO1_29 IOMUX_PAD(0x548, 0x104, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC IOMUX_PAD(0x54c, 0x108, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_HSYNC__GPIO1_30 IOMUX_PAD(0x54c, 0x108, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK IOMUX_PAD(0x550, 0x10c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSI_PIXCLK__GPIO1_31 IOMUX_PAD(0x550, 0x10c, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_CLK__I2C1_SCL IOMUX_PAD(0x554, 0x110, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__GPIO2_24 IOMUX_PAD(0x554, 0x110, 5, 0x8a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK IOMUX_PAD(0x554, 0x110, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C1_DAT__I2C1_SDA IOMUX_PAD(0x558, 0x114, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C1_DAT__GPIO2_25 IOMUX_PAD(0x558, 0x114, 5, 0x8ac, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_CLK__I2C2_SCL IOMUX_PAD(0x55c, 0x118, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__CAN1_TXCAN IOMUX_PAD(0x55c, 0x118, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR IOMUX_PAD(0x55c, 0x118, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__GPIO2_26 IOMUX_PAD(0x55c, 0x118, 5, 0x8b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 IOMUX_PAD(0x55c, 0x118, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_I2C2_DAT__I2C2_SDA IOMUX_PAD(0x560, 0x11c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__CAN1_RXCAN IOMUX_PAD(0x560, 0x11c, 1, 0x7c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC IOMUX_PAD(0x560, 0x11c, 2, 0x9f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__GPIO2_27 IOMUX_PAD(0x560, 0x11c, 5, 0x8b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 IOMUX_PAD(0x560, 0x11c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD4__AUDMUX_AUD4_TXD IOMUX_PAD(0x564, 0x120, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__GPIO2_28 IOMUX_PAD(0x564, 0x120, 5, 0x8b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 IOMUX_PAD(0x564, 0x120, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD4__AUDMUX_AUD4_RXD IOMUX_PAD(0x568, 0x124, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__GPIO2_29 IOMUX_PAD(0x568, 0x124, 5, 0x8bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 IOMUX_PAD(0x568, 0x124, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK4__AUDMUX_AUD4_TXC IOMUX_PAD(0x56c, 0x128, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__GPIO2_30 IOMUX_PAD(0x56c, 0x128, 5, 0x8c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 IOMUX_PAD(0x56c, 0x128, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS IOMUX_PAD(0x570, 0x12c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__GPIO2_31 IOMUX_PAD(0x570, 0x12c, 5, 0x8c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 IOMUX_PAD(0x570, 0x12c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXD5__AUDMUX_AUD5_TXD IOMUX_PAD(0x574, 0x130, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x574, 0x130, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__CSPI2_MOSI IOMUX_PAD(0x574, 0x130, 2, 0x7ec, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__GPIO1_0 IOMUX_PAD(0x574, 0x130, 5, 0x82c, 1, NO_PAD_CTRL)
+#define MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 IOMUX_PAD(0x574, 0x130, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SRXD5__AUDMUX_AUD5_RXD IOMUX_PAD(0x578, 0x134, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 IOMUX_PAD(0x578, 0x134, 1, 0x998, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__CSPI2_MISO IOMUX_PAD(0x578, 0x134, 2, 0x7e8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__GPIO1_1 IOMUX_PAD(0x578, 0x134, 5, 0x838, 1, NO_PAD_CTRL)
+#define MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 IOMUX_PAD(0x578, 0x134, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCK5__AUDMUX_AUD5_TXC IOMUX_PAD(0x57c, 0x138, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x57c, 0x138, 1, 0x994, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__CSPI2_SCLK IOMUX_PAD(0x57c, 0x138, 2, 0x7e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__GPIO1_2 IOMUX_PAD(0x57c, 0x138, 5, 0x848, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 IOMUX_PAD(0x57c, 0x138, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS IOMUX_PAD(0x580, 0x13c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__CSPI2_RDY IOMUX_PAD(0x580, 0x13c, 2, 0x7e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__GPIO1_3 IOMUX_PAD(0x580, 0x13c, 5, 0x84c, 0, NO_PAD_CTRL)
+#define MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 IOMUX_PAD(0x580, 0x13c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKR__ESAI_SCKR IOMUX_PAD(0x584, 0x140, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__GPIO1_4 IOMUX_PAD(0x584, 0x140, 5, 0x850, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 IOMUX_PAD(0x584, 0x140, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FSR__ESAI_FSR IOMUX_PAD(0x588, 0x144, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FSR__GPIO1_5 IOMUX_PAD(0x588, 0x144, 5, 0x854, 1, NO_PAD_CTRL)
+#define MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 IOMUX_PAD(0x588, 0x144, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKR__ESAI_HCKR IOMUX_PAD(0x58c, 0x148, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__AUDMUX_AUD5_RXFS IOMUX_PAD(0x58c, 0x148, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__CSPI2_SS0 IOMUX_PAD(0x58c, 0x148, 2, 0x7f0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__IPU_FLASH_STROBE IOMUX_PAD(0x58c, 0x148, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__GPIO1_6 IOMUX_PAD(0x58c, 0x148, 5, 0x858, 1, NO_PAD_CTRL)
+#define MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 IOMUX_PAD(0x58c, 0x148, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SCKT__ESAI_SCKT IOMUX_PAD(0x590, 0x14c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__GPIO1_7 IOMUX_PAD(0x590, 0x14c, 5, 0x85c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__IPU_CSI_D_0 IOMUX_PAD(0x590, 0x14c, 6, 0x930, 0, NO_PAD_CTRL)
+#define MX35_PAD_SCKT__KPP_ROW_2 IOMUX_PAD(0x590, 0x14c, 7, 0x978, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FST__ESAI_FST IOMUX_PAD(0x594, 0x150, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__GPIO1_8 IOMUX_PAD(0x594, 0x150, 5, 0x860, 1, NO_PAD_CTRL)
+#define MX35_PAD_FST__IPU_CSI_D_1 IOMUX_PAD(0x594, 0x150, 6, 0x934, 0, NO_PAD_CTRL)
+#define MX35_PAD_FST__KPP_ROW_3 IOMUX_PAD(0x594, 0x150, 7, 0x97c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_HCKT__ESAI_HCKT IOMUX_PAD(0x598, 0x154, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__AUDMUX_AUD5_RXC IOMUX_PAD(0x598, 0x154, 1, 0x7a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__GPIO1_9 IOMUX_PAD(0x598, 0x154, 5, 0x864, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__IPU_CSI_D_2 IOMUX_PAD(0x598, 0x154, 6, 0x938, 0, NO_PAD_CTRL)
+#define MX35_PAD_HCKT__KPP_COL_3 IOMUX_PAD(0x598, 0x154, 7, 0x95c, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX5_RX0__ESAI_TX5_RX0 IOMUX_PAD(0x59c, 0x158, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC IOMUX_PAD(0x59c, 0x158, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CSPI2_SS2 IOMUX_PAD(0x59c, 0x158, 2, 0x7f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__CAN2_TXCAN IOMUX_PAD(0x59c, 0x158, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__UART2_DTR IOMUX_PAD(0x59c, 0x158, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__GPIO1_10 IOMUX_PAD(0x59c, 0x158, 5, 0x830, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 IOMUX_PAD(0x59c, 0x158, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TX4_RX1__ESAI_TX4_RX1 IOMUX_PAD(0x5a0, 0x15c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS IOMUX_PAD(0x5a0, 0x15c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CSPI2_SS3 IOMUX_PAD(0x5a0, 0x15c, 2, 0x7fc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__CAN2_RXCAN IOMUX_PAD(0x5a0, 0x15c, 3, 0x7cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__UART2_DSR IOMUX_PAD(0x5a0, 0x15c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__GPIO1_11 IOMUX_PAD(0x5a0, 0x15c, 5, 0x834, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__IPU_CSI_D_3 IOMUX_PAD(0x5a0, 0x15c, 6, 0x93c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX4_RX1__KPP_ROW_0 IOMUX_PAD(0x5a0, 0x15c, 7, 0x970, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX3_RX2__ESAI_TX3_RX2 IOMUX_PAD(0x5a4, 0x160, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__I2C3_SCL IOMUX_PAD(0x5a4, 0x160, 1, 0x91c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__EMI_NANDF_CE1 IOMUX_PAD(0x5a4, 0x160, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__GPIO1_12 IOMUX_PAD(0x5a4, 0x160, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__IPU_CSI_D_4 IOMUX_PAD(0x5a4, 0x160, 6, 0x940, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX3_RX2__KPP_ROW_1 IOMUX_PAD(0x5a4, 0x160, 7, 0x974, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX2_RX3__ESAI_TX2_RX3 IOMUX_PAD(0x5a8, 0x164, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__I2C3_SDA IOMUX_PAD(0x5a8, 0x164, 1, 0x920, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__EMI_NANDF_CE2 IOMUX_PAD(0x5a8, 0x164, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__GPIO1_13 IOMUX_PAD(0x5a8, 0x164, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__IPU_CSI_D_5 IOMUX_PAD(0x5a8, 0x164, 6, 0x944, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX2_RX3__KPP_COL_0 IOMUX_PAD(0x5a8, 0x164, 7, 0x950, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX1__ESAI_TX1 IOMUX_PAD(0x5ac, 0x168, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CCM_PMIC_RDY IOMUX_PAD(0x5ac, 0x168, 1, 0x7d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX1__CSPI1_SS2 IOMUX_PAD(0x5ac, 0x168, 2, 0x7d8, 2, NO_PAD_CTRL)
+#define MX35_PAD_TX1__EMI_NANDF_CE3 IOMUX_PAD(0x5ac, 0x168, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__UART2_RI IOMUX_PAD(0x5ac, 0x168, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__GPIO1_14 IOMUX_PAD(0x5ac, 0x168, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__IPU_CSI_D_6 IOMUX_PAD(0x5ac, 0x168, 6, 0x948, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX1__KPP_COL_1 IOMUX_PAD(0x5ac, 0x168, 7, 0x954, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_TX0__ESAI_TX0 IOMUX_PAD(0x5b0, 0x16c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5b0, 0x16c, 1, 0x994, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__CSPI1_SS3 IOMUX_PAD(0x5b0, 0x16c, 2, 0x7dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__EMI_DTACK_B IOMUX_PAD(0x5b0, 0x16c, 3, 0x800, 1, NO_PAD_CTRL)
+#define MX35_PAD_TX0__UART2_DCD IOMUX_PAD(0x5b0, 0x16c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__GPIO1_15 IOMUX_PAD(0x5b0, 0x16c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__IPU_CSI_D_7 IOMUX_PAD(0x5b0, 0x16c, 6, 0x94c, 0, NO_PAD_CTRL)
+#define MX35_PAD_TX0__KPP_COL_2 IOMUX_PAD(0x5b0, 0x16c, 7, 0x958, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MOSI__CSPI1_MOSI IOMUX_PAD(0x5b4, 0x170, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__GPIO1_16 IOMUX_PAD(0x5b4, 0x170, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 IOMUX_PAD(0x5b4, 0x170, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_MISO__CSPI1_MISO IOMUX_PAD(0x5b8, 0x174, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__GPIO1_17 IOMUX_PAD(0x5b8, 0x174, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 IOMUX_PAD(0x5b8, 0x174, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS0__CSPI1_SS0 IOMUX_PAD(0x5bc, 0x178, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__OWIRE_LINE IOMUX_PAD(0x5bc, 0x178, 1, 0x990, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__CSPI2_SS3 IOMUX_PAD(0x5bc, 0x178, 2, 0x7fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__GPIO1_18 IOMUX_PAD(0x5bc, 0x178, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 IOMUX_PAD(0x5bc, 0x178, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SS1__CSPI1_SS1 IOMUX_PAD(0x5c0, 0x17c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__PWM_PWMO IOMUX_PAD(0x5c0, 0x17c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__CCM_CLK32K IOMUX_PAD(0x5c0, 0x17c, 2, 0x7d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__GPIO1_19 IOMUX_PAD(0x5c0, 0x17c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 IOMUX_PAD(0x5c0, 0x17c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 IOMUX_PAD(0x5c0, 0x17c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SCLK__CSPI1_SCLK IOMUX_PAD(0x5c4, 0x180, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__GPIO3_4 IOMUX_PAD(0x5c4, 0x180, 5, 0x904, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 IOMUX_PAD(0x5c4, 0x180, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 IOMUX_PAD(0x5c4, 0x180, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY IOMUX_PAD(0x5c8, 0x184, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 IOMUX_PAD(0x5c8, 0x184, 5, 0x908, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 IOMUX_PAD(0x5c8, 0x184, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 IOMUX_PAD(0x5c8, 0x184, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD1__UART1_RXD_MUX IOMUX_PAD(0x5cc, 0x188, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__CSPI2_MOSI IOMUX_PAD(0x5cc, 0x188, 1, 0x7ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__KPP_COL_4 IOMUX_PAD(0x5cc, 0x188, 4, 0x960, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__GPIO3_6 IOMUX_PAD(0x5cc, 0x188, 5, 0x90c, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 IOMUX_PAD(0x5cc, 0x188, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD1__UART1_TXD_MUX IOMUX_PAD(0x5d0, 0x18c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__CSPI2_MISO IOMUX_PAD(0x5d0, 0x18c, 1, 0x7e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__KPP_COL_5 IOMUX_PAD(0x5d0, 0x18c, 4, 0x964, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__GPIO3_7 IOMUX_PAD(0x5d0, 0x18c, 5, 0x910, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 IOMUX_PAD(0x5d0, 0x18c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS1__UART1_RTS IOMUX_PAD(0x5d4, 0x190, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__CSPI2_SCLK IOMUX_PAD(0x5d4, 0x190, 1, 0x7e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__I2C3_SCL IOMUX_PAD(0x5d4, 0x190, 2, 0x91c, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__IPU_CSI_D_0 IOMUX_PAD(0x5d4, 0x190, 3, 0x930, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__KPP_COL_6 IOMUX_PAD(0x5d4, 0x190, 4, 0x968, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__GPIO3_8 IOMUX_PAD(0x5d4, 0x190, 5, 0x914, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__EMI_NANDF_CE1 IOMUX_PAD(0x5d4, 0x190, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 IOMUX_PAD(0x5d4, 0x190, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS1__UART1_CTS IOMUX_PAD(0x5d8, 0x194, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__CSPI2_RDY IOMUX_PAD(0x5d8, 0x194, 1, 0x7e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__I2C3_SDA IOMUX_PAD(0x5d8, 0x194, 2, 0x920, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__IPU_CSI_D_1 IOMUX_PAD(0x5d8, 0x194, 3, 0x934, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__KPP_COL_7 IOMUX_PAD(0x5d8, 0x194, 4, 0x96c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__GPIO3_9 IOMUX_PAD(0x5d8, 0x194, 5, 0x918, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__EMI_NANDF_CE2 IOMUX_PAD(0x5d8, 0x194, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 IOMUX_PAD(0x5d8, 0x194, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RXD2__UART2_RXD_MUX IOMUX_PAD(0x5dc, 0x198, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__KPP_ROW_4 IOMUX_PAD(0x5dc, 0x198, 4, 0x980, 0, NO_PAD_CTRL)
+#define MX35_PAD_RXD2__GPIO3_10 IOMUX_PAD(0x5dc, 0x198, 5, 0x8ec, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TXD2__UART2_TXD_MUX IOMUX_PAD(0x5e0, 0x19c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x5e0, 0x19c, 1, 0x994, 2, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__KPP_ROW_5 IOMUX_PAD(0x5e0, 0x19c, 4, 0x984, 0, NO_PAD_CTRL)
+#define MX35_PAD_TXD2__GPIO3_11 IOMUX_PAD(0x5e0, 0x19c, 5, 0x8f0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTS2__UART2_RTS IOMUX_PAD(0x5e4, 0x1a0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__SPDIF_SPDIF_IN1 IOMUX_PAD(0x5e4, 0x1a0, 1, 0x998, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__CAN2_RXCAN IOMUX_PAD(0x5e4, 0x1a0, 2, 0x7cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__IPU_CSI_D_2 IOMUX_PAD(0x5e4, 0x1a0, 3, 0x938, 1, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__KPP_ROW_6 IOMUX_PAD(0x5e4, 0x1a0, 4, 0x988, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__GPIO3_12 IOMUX_PAD(0x5e4, 0x1a0, 5, 0x8f4, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__AUDMUX_AUD5_RXC IOMUX_PAD(0x5e4, 0x1a0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_RTS2__UART3_RXD_MUX IOMUX_PAD(0x5e4, 0x1a0, 7, 0x9a0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CTS2__UART2_CTS IOMUX_PAD(0x5e8, 0x1a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x5e8, 0x1a4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__CAN2_TXCAN IOMUX_PAD(0x5e8, 0x1a4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__IPU_CSI_D_3 IOMUX_PAD(0x5e8, 0x1a4, 3, 0x93c, 1, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__KPP_ROW_7 IOMUX_PAD(0x5e8, 0x1a4, 4, 0x98c, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__GPIO3_13 IOMUX_PAD(0x5e8, 0x1a4, 5, 0x8f8, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__AUDMUX_AUD5_RXFS IOMUX_PAD(0x5e8, 0x1a4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CTS2__UART3_TXD_MUX IOMUX_PAD(0x5e8, 0x1a4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_RTCK__ARM11P_TOP_RTCK IOMUX_PAD(0x5ec, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TCK__SJC_TCK IOMUX_PAD(0x5f0, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TMS__SJC_TMS IOMUX_PAD(0x5f4, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDI__SJC_TDI IOMUX_PAD(0x5f8, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TDO__SJC_TDO IOMUX_PAD(0x5fc, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TRSTB__SJC_TRSTB IOMUX_PAD(0x600, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_DE_B__SJC_DE_B IOMUX_PAD(0x604, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SJC_MOD__SJC_MOD IOMUX_PAD(0x608, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR IOMUX_PAD(0x60c, 0x1a8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR IOMUX_PAD(0x60c, 0x1a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_PWR__GPIO3_14 IOMUX_PAD(0x60c, 0x1a8, 5, 0x8fc, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC IOMUX_PAD(0x610, 0x1ac, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC IOMUX_PAD(0x610, 0x1ac, 1, 0x9f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_USBOTG_OC__GPIO3_15 IOMUX_PAD(0x610, 0x1ac, 5, 0x900, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD0__IPU_DISPB_DAT_0 IOMUX_PAD(0x614, 0x1b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD0__GPIO2_0 IOMUX_PAD(0x614, 0x1b0, 5, 0x868, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 IOMUX_PAD(0x614, 0x1b0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD1__IPU_DISPB_DAT_1 IOMUX_PAD(0x618, 0x1b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__GPIO2_1 IOMUX_PAD(0x618, 0x1b4, 5, 0x894, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 IOMUX_PAD(0x618, 0x1b4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD2__IPU_DISPB_DAT_2 IOMUX_PAD(0x61c, 0x1b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__GPIO2_2 IOMUX_PAD(0x61c, 0x1b8, 5, 0x8c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 IOMUX_PAD(0x61c, 0x1b8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD3__IPU_DISPB_DAT_3 IOMUX_PAD(0x620, 0x1bc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__GPIO2_3 IOMUX_PAD(0x620, 0x1bc, 5, 0x8cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 IOMUX_PAD(0x620, 0x1bc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD4__IPU_DISPB_DAT_4 IOMUX_PAD(0x624, 0x1c0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__GPIO2_4 IOMUX_PAD(0x624, 0x1c0, 5, 0x8d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 IOMUX_PAD(0x624, 0x1c0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD5__IPU_DISPB_DAT_5 IOMUX_PAD(0x628, 0x1c4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__GPIO2_5 IOMUX_PAD(0x628, 0x1c4, 5, 0x8d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 IOMUX_PAD(0x628, 0x1c4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD6__IPU_DISPB_DAT_6 IOMUX_PAD(0x62c, 0x1c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__GPIO2_6 IOMUX_PAD(0x62c, 0x1c8, 5, 0x8d8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 IOMUX_PAD(0x62c, 0x1c8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD7__IPU_DISPB_DAT_7 IOMUX_PAD(0x630, 0x1cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__GPIO2_7 IOMUX_PAD(0x630, 0x1cc, 5, 0x8dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 IOMUX_PAD(0x630, 0x1cc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD8__IPU_DISPB_DAT_8 IOMUX_PAD(0x634, 0x1d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__GPIO2_8 IOMUX_PAD(0x634, 0x1d0, 5, 0x8e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 IOMUX_PAD(0x634, 0x1d0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD9__IPU_DISPB_DAT_9 IOMUX_PAD(0x638, 0x1d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9 IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4 0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 IOMUX_PAD(0x638, 0x1d4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD10__IPU_DISPB_DAT_10 IOMUX_PAD(0x63c, 0x1d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__GPIO2_10 IOMUX_PAD(0x63c, 0x1d8, 5, 0x86c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 IOMUX_PAD(0x63c, 0x1d8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD11__IPU_DISPB_DAT_11 IOMUX_PAD(0x640, 0x1dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__GPIO2_11 IOMUX_PAD(0x640, 0x1dc, 5, 0x870, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 IOMUX_PAD(0x640, 0x1dc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD11__ARM11P_TOP_TRACE_4 IOMUX_PAD(0x640, 0x1dc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD12__IPU_DISPB_DAT_12 IOMUX_PAD(0x644, 0x1e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__GPIO2_12 IOMUX_PAD(0x644, 0x1e0, 5, 0x874, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 IOMUX_PAD(0x644, 0x1e0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD12__ARM11P_TOP_TRACE_5 IOMUX_PAD(0x644, 0x1e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD13__IPU_DISPB_DAT_13 IOMUX_PAD(0x648, 0x1e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__GPIO2_13 IOMUX_PAD(0x648, 0x1e4, 5, 0x878, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 IOMUX_PAD(0x648, 0x1e4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD13__ARM11P_TOP_TRACE_6 IOMUX_PAD(0x648, 0x1e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD14__IPU_DISPB_DAT_14 IOMUX_PAD(0x64c, 0x1e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__GPIO2_14 IOMUX_PAD(0x64c, 0x1e8, 5, 0x87c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 IOMUX_PAD(0x64c, 0x1e8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD14__ARM11P_TOP_TRACE_7 IOMUX_PAD(0x64c, 0x1e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD15__IPU_DISPB_DAT_15 IOMUX_PAD(0x650, 0x1ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__GPIO2_15 IOMUX_PAD(0x650, 0x1ec, 5, 0x880, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 IOMUX_PAD(0x650, 0x1ec, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD15__ARM11P_TOP_TRACE_8 IOMUX_PAD(0x650, 0x1ec, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD16__IPU_DISPB_DAT_16 IOMUX_PAD(0x654, 0x1f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x654, 0x1f0, 2, 0x928, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__GPIO2_16 IOMUX_PAD(0x654, 0x1f0, 5, 0x884, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 IOMUX_PAD(0x654, 0x1f0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD16__ARM11P_TOP_TRACE_9 IOMUX_PAD(0x654, 0x1f0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD17__IPU_DISPB_DAT_17 IOMUX_PAD(0x658, 0x1f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__IPU_DISPB_CS2 IOMUX_PAD(0x658, 0x1f4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__GPIO2_17 IOMUX_PAD(0x658, 0x1f4, 5, 0x888, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 IOMUX_PAD(0x658, 0x1f4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD17__ARM11P_TOP_TRACE_10 IOMUX_PAD(0x658, 0x1f4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD18__IPU_DISPB_DAT_18 IOMUX_PAD(0x65c, 0x1f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x65c, 0x1f8, 1, 0x924, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x65c, 0x1f8, 2, 0x928, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ESDHC3_CMD IOMUX_PAD(0x65c, 0x1f8, 3, 0x818, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x65c, 0x1f8, 4, 0x9b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__GPIO3_24 IOMUX_PAD(0x65c, 0x1f8, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 IOMUX_PAD(0x65c, 0x1f8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD18__ARM11P_TOP_TRACE_11 IOMUX_PAD(0x65c, 0x1f8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD19__IPU_DISPB_DAT_19 IOMUX_PAD(0x660, 0x1fc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_BCLK IOMUX_PAD(0x660, 0x1fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__IPU_DISPB_CS1 IOMUX_PAD(0x660, 0x1fc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ESDHC3_CLK IOMUX_PAD(0x660, 0x1fc, 3, 0x814, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__USB_TOP_USBOTG_DIR IOMUX_PAD(0x660, 0x1fc, 4, 0x9c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__GPIO3_25 IOMUX_PAD(0x660, 0x1fc, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 IOMUX_PAD(0x660, 0x1fc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD19__ARM11P_TOP_TRACE_12 IOMUX_PAD(0x660, 0x1fc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD20__IPU_DISPB_DAT_20 IOMUX_PAD(0x664, 0x200, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_CS0 IOMUX_PAD(0x664, 0x200, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__IPU_DISPB_SD_CLK IOMUX_PAD(0x664, 0x200, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ESDHC3_DAT0 IOMUX_PAD(0x664, 0x200, 3, 0x81c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__GPIO3_26 IOMUX_PAD(0x664, 0x200, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 IOMUX_PAD(0x664, 0x200, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD20__ARM11P_TOP_TRACE_13 IOMUX_PAD(0x664, 0x200, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD21__IPU_DISPB_DAT_21 IOMUX_PAD(0x668, 0x204, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_PAR_RS IOMUX_PAD(0x668, 0x204, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__IPU_DISPB_SER_RS IOMUX_PAD(0x668, 0x204, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ESDHC3_DAT1 IOMUX_PAD(0x668, 0x204, 3, 0x820, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__USB_TOP_USBOTG_STP IOMUX_PAD(0x668, 0x204, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__GPIO3_27 IOMUX_PAD(0x668, 0x204, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL IOMUX_PAD(0x668, 0x204, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD21__ARM11P_TOP_TRACE_14 IOMUX_PAD(0x668, 0x204, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD22__IPU_DISPB_DAT_22 IOMUX_PAD(0x66c, 0x208, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_WR IOMUX_PAD(0x66c, 0x208, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__IPU_DISPB_SD_D_I IOMUX_PAD(0x66c, 0x208, 2, 0x92c, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ESDHC3_DAT2 IOMUX_PAD(0x66c, 0x208, 3, 0x824, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__USB_TOP_USBOTG_NXT IOMUX_PAD(0x66c, 0x208, 4, 0x9c8, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__GPIO3_28 IOMUX_PAD(0x66c, 0x208, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR IOMUX_PAD(0x66c, 0x208, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD22__ARM11P_TOP_TRCTL IOMUX_PAD(0x66c, 0x208, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_LD23__IPU_DISPB_DAT_23 IOMUX_PAD(0x670, 0x20c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_RD IOMUX_PAD(0x670, 0x20c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__IPU_DISPB_SD_D_IO IOMUX_PAD(0x670, 0x20c, 2, 0x92c, 1, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ESDHC3_DAT3 IOMUX_PAD(0x670, 0x20c, 3, 0x828, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x670, 0x20c, 4, 0x9c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__GPIO3_29 IOMUX_PAD(0x670, 0x20c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS IOMUX_PAD(0x670, 0x20c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_LD23__ARM11P_TOP_TRCLK IOMUX_PAD(0x670, 0x20c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC IOMUX_PAD(0x674, 0x210, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO IOMUX_PAD(0x674, 0x210, 2, 0x92c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__GPIO3_30 IOMUX_PAD(0x674, 0x210, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE IOMUX_PAD(0x674, 0x210, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 IOMUX_PAD(0x674, 0x210, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK IOMUX_PAD(0x678, 0x214, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK IOMUX_PAD(0x678, 0x214, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__GPIO3_31 IOMUX_PAD(0x678, 0x214, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 IOMUX_PAD(0x678, 0x214, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 IOMUX_PAD(0x678, 0x214, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY IOMUX_PAD(0x67c, 0x218, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O IOMUX_PAD(0x67c, 0x218, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__GPIO1_0 IOMUX_PAD(0x67c, 0x218, 5, 0x82c, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 IOMUX_PAD(0x67c, 0x218, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 IOMUX_PAD(0x67c, 0x218, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_CONTRAST__IPU_DISPB_CONTR IOMUX_PAD(0x680, 0x21c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__GPIO1_1 IOMUX_PAD(0x680, 0x21c, 5, 0x838, 2, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 IOMUX_PAD(0x680, 0x21c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 IOMUX_PAD(0x680, 0x21c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC IOMUX_PAD(0x684, 0x220, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 IOMUX_PAD(0x684, 0x220, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__GPIO1_2 IOMUX_PAD(0x684, 0x220, 5, 0x848, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD IOMUX_PAD(0x684, 0x220, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 IOMUX_PAD(0x684, 0x220, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_REV__IPU_DISPB_D3_REV IOMUX_PAD(0x688, 0x224, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__IPU_DISPB_SER_RS IOMUX_PAD(0x688, 0x224, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__GPIO1_3 IOMUX_PAD(0x688, 0x224, 5, 0x84c, 1, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB IOMUX_PAD(0x688, 0x224, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 IOMUX_PAD(0x688, 0x224, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS IOMUX_PAD(0x68c, 0x228, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__IPU_DISPB_CS2 IOMUX_PAD(0x68c, 0x228, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__GPIO1_4 IOMUX_PAD(0x68c, 0x228, 5, 0x850, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 IOMUX_PAD(0x68c, 0x228, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 IOMUX_PAD(0x68c, 0x228, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL IOMUX_PAD(0x690, 0x22c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x690, 0x22c, 2, 0x928, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__GPIO1_5 IOMUX_PAD(0x690, 0x22c, 5, 0x854, 2, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 IOMUX_PAD(0x690, 0x22c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 IOMUX_PAD(0x690, 0x22c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CMD__ESDHC1_CMD IOMUX_PAD(0x694, 0x230, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__MSHC_SCLK IOMUX_PAD(0x694, 0x230, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x694, 0x230, 3, 0x924, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x694, 0x230, 4, 0x9b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__GPIO1_6 IOMUX_PAD(0x694, 0x230, 5, 0x858, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL IOMUX_PAD(0x694, 0x230, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_CLK__ESDHC1_CLK IOMUX_PAD(0x698, 0x234, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__MSHC_BS IOMUX_PAD(0x698, 0x234, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__IPU_DISPB_BCLK IOMUX_PAD(0x698, 0x234, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x698, 0x234, 4, 0x9b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__GPIO1_7 IOMUX_PAD(0x698, 0x234, 5, 0x85c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK IOMUX_PAD(0x698, 0x234, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA0__ESDHC1_DAT0 IOMUX_PAD(0x69c, 0x238, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__MSHC_DATA_0 IOMUX_PAD(0x69c, 0x238, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 IOMUX_PAD(0x69c, 0x238, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x69c, 0x238, 4, 0x9bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__GPIO1_8 IOMUX_PAD(0x69c, 0x238, 5, 0x860, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 IOMUX_PAD(0x69c, 0x238, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA1__ESDHC1_DAT1 IOMUX_PAD(0x6a0, 0x23c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__MSHC_DATA_1 IOMUX_PAD(0x6a0, 0x23c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS IOMUX_PAD(0x6a0, 0x23c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6a0, 0x23c, 4, 0x9a4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__GPIO1_9 IOMUX_PAD(0x6a0, 0x23c, 5, 0x864, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 IOMUX_PAD(0x6a0, 0x23c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA2__ESDHC1_DAT2 IOMUX_PAD(0x6a4, 0x240, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__MSHC_DATA_2 IOMUX_PAD(0x6a4, 0x240, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__IPU_DISPB_WR IOMUX_PAD(0x6a4, 0x240, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6a4, 0x240, 4, 0x9a8, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__GPIO1_10 IOMUX_PAD(0x6a4, 0x240, 5, 0x830, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 IOMUX_PAD(0x6a4, 0x240, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD1_DATA3__ESDHC1_DAT3 IOMUX_PAD(0x6a8, 0x244, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__MSHC_DATA_3 IOMUX_PAD(0x6a8, 0x244, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__IPU_DISPB_RD IOMUX_PAD(0x6a8, 0x244, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6a8, 0x244, 4, 0x9ac, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__GPIO1_11 IOMUX_PAD(0x6a8, 0x244, 5, 0x834, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 IOMUX_PAD(0x6a8, 0x244, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CMD__ESDHC2_CMD IOMUX_PAD(0x6ac, 0x248, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__I2C3_SCL IOMUX_PAD(0x6ac, 0x248, 1, 0x91c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__ESDHC1_DAT4 IOMUX_PAD(0x6ac, 0x248, 2, 0x804, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_CSI_D_2 IOMUX_PAD(0x6ac, 0x248, 3, 0x938, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x6ac, 0x248, 4, 0x9dc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__GPIO2_0 IOMUX_PAD(0x6ac, 0x248, 5, 0x868, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x6ac, 0x248, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6ac, 0x248, 7, 0x928, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_CLK__ESDHC2_CLK IOMUX_PAD(0x6b0, 0x24c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__I2C3_SDA IOMUX_PAD(0x6b0, 0x24c, 1, 0x920, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__ESDHC1_DAT5 IOMUX_PAD(0x6b0, 0x24c, 2, 0x808, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_CSI_D_3 IOMUX_PAD(0x6b0, 0x24c, 3, 0x93c, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x6b0, 0x24c, 4, 0x9e0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__GPIO2_1 IOMUX_PAD(0x6b0, 0x24c, 5, 0x894, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 IOMUX_PAD(0x6b0, 0x24c, 6, 0x998, 2, NO_PAD_CTRL)
+#define MX35_PAD_SD2_CLK__IPU_DISPB_CS2 IOMUX_PAD(0x6b0, 0x24c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA0__ESDHC2_DAT0 IOMUX_PAD(0x6b4, 0x250, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__UART3_RXD_MUX IOMUX_PAD(0x6b4, 0x250, 1, 0x9a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__ESDHC1_DAT6 IOMUX_PAD(0x6b4, 0x250, 2, 0x80c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__IPU_CSI_D_4 IOMUX_PAD(0x6b4, 0x250, 3, 0x940, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x6b4, 0x250, 4, 0x9e4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__GPIO2_2 IOMUX_PAD(0x6b4, 0x250, 5, 0x8c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x6b4, 0x250, 6, 0x994, 3, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA1__ESDHC2_DAT1 IOMUX_PAD(0x6b8, 0x254, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__UART3_TXD_MUX IOMUX_PAD(0x6b8, 0x254, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__ESDHC1_DAT7 IOMUX_PAD(0x6b8, 0x254, 2, 0x810, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__IPU_CSI_D_5 IOMUX_PAD(0x6b8, 0x254, 3, 0x944, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x6b8, 0x254, 4, 0x9cc, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA1__GPIO2_3 IOMUX_PAD(0x6b8, 0x254, 5, 0x8cc, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA2__ESDHC2_DAT2 IOMUX_PAD(0x6bc, 0x258, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__UART3_RTS IOMUX_PAD(0x6bc, 0x258, 1, 0x99c, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__CAN1_RXCAN IOMUX_PAD(0x6bc, 0x258, 2, 0x7c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__IPU_CSI_D_6 IOMUX_PAD(0x6bc, 0x258, 3, 0x948, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x6bc, 0x258, 4, 0x9d0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA2__GPIO2_4 IOMUX_PAD(0x6bc, 0x258, 5, 0x8d0, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_SD2_DATA3__ESDHC2_DAT3 IOMUX_PAD(0x6c0, 0x25c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__UART3_CTS IOMUX_PAD(0x6c0, 0x25c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__CAN1_TXCAN IOMUX_PAD(0x6c0, 0x25c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__IPU_CSI_D_7 IOMUX_PAD(0x6c0, 0x25c, 3, 0x94c, 1, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x6c0, 0x25c, 4, 0x9d4, 0, NO_PAD_CTRL)
+#define MX35_PAD_SD2_DATA3__GPIO2_5 IOMUX_PAD(0x6c0, 0x25c, 5, 0x8d4, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS0__ATA_CS0 IOMUX_PAD(0x6c4, 0x260, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__CSPI1_SS3 IOMUX_PAD(0x6c4, 0x260, 1, 0x7dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DISPB_CS1 IOMUX_PAD(0x6c4, 0x260, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__GPIO2_6 IOMUX_PAD(0x6c4, 0x260, 5, 0x8d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__IPU_DIAGB_0 IOMUX_PAD(0x6c4, 0x260, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 IOMUX_PAD(0x6c4, 0x260, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_CS1__ATA_CS1 IOMUX_PAD(0x6c8, 0x264, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DISPB_CS2 IOMUX_PAD(0x6c8, 0x264, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__CSPI2_SS0 IOMUX_PAD(0x6c8, 0x264, 4, 0x7f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__GPIO2_7 IOMUX_PAD(0x6c8, 0x264, 5, 0x8dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__IPU_DIAGB_1 IOMUX_PAD(0x6c8, 0x264, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 IOMUX_PAD(0x6c8, 0x264, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOR__ATA_DIOR IOMUX_PAD(0x6cc, 0x268, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ESDHC3_DAT0 IOMUX_PAD(0x6cc, 0x268, 1, 0x81c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR IOMUX_PAD(0x6cc, 0x268, 2, 0x9c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 IOMUX_PAD(0x6cc, 0x268, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__CSPI2_SS1 IOMUX_PAD(0x6cc, 0x268, 4, 0x7f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__GPIO2_8 IOMUX_PAD(0x6cc, 0x268, 5, 0x8e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__IPU_DIAGB_2 IOMUX_PAD(0x6cc, 0x268, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 IOMUX_PAD(0x6cc, 0x268, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DIOW__ATA_DIOW IOMUX_PAD(0x6d0, 0x26c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ESDHC3_DAT1 IOMUX_PAD(0x6d0, 0x26c, 1, 0x820, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP IOMUX_PAD(0x6d0, 0x26c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 IOMUX_PAD(0x6d0, 0x26c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__CSPI2_MOSI IOMUX_PAD(0x6d0, 0x26c, 4, 0x7ec, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__GPIO2_9 IOMUX_PAD(0x6d0, 0x26c, 5, 0x8e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__IPU_DIAGB_3 IOMUX_PAD(0x6d0, 0x26c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 IOMUX_PAD(0x6d0, 0x26c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMACK__ATA_DMACK IOMUX_PAD(0x6d4, 0x270, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ESDHC3_DAT2 IOMUX_PAD(0x6d4, 0x270, 1, 0x824, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT IOMUX_PAD(0x6d4, 0x270, 2, 0x9c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__CSPI2_MISO IOMUX_PAD(0x6d4, 0x270, 4, 0x7e8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__GPIO2_10 IOMUX_PAD(0x6d4, 0x270, 5, 0x86c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__IPU_DIAGB_4 IOMUX_PAD(0x6d4, 0x270, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 IOMUX_PAD(0x6d4, 0x270, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_RESET_B__ATA_RESET_B IOMUX_PAD(0x6d8, 0x274, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 IOMUX_PAD(0x6d8, 0x274, 1, 0x828, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 IOMUX_PAD(0x6d8, 0x274, 2, 0x9a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O IOMUX_PAD(0x6d8, 0x274, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__CSPI2_RDY IOMUX_PAD(0x6d8, 0x274, 4, 0x7e4, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__GPIO2_11 IOMUX_PAD(0x6d8, 0x274, 5, 0x870, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 IOMUX_PAD(0x6d8, 0x274, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 IOMUX_PAD(0x6d8, 0x274, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_IORDY__ATA_IORDY IOMUX_PAD(0x6dc, 0x278, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC3_DAT4 IOMUX_PAD(0x6dc, 0x278, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 IOMUX_PAD(0x6dc, 0x278, 2, 0x9a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO IOMUX_PAD(0x6dc, 0x278, 3, 0x92c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ESDHC2_DAT4 IOMUX_PAD(0x6dc, 0x278, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__GPIO2_12 IOMUX_PAD(0x6dc, 0x278, 5, 0x874, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__IPU_DIAGB_6 IOMUX_PAD(0x6dc, 0x278, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 IOMUX_PAD(0x6dc, 0x278, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA0__ATA_DATA_0 IOMUX_PAD(0x6e0, 0x27c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC3_DAT5 IOMUX_PAD(0x6e0, 0x27c, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 IOMUX_PAD(0x6e0, 0x27c, 2, 0x9ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x6e0, 0x27c, 3, 0x928, 4, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ESDHC2_DAT5 IOMUX_PAD(0x6e0, 0x27c, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__GPIO2_13 IOMUX_PAD(0x6e0, 0x27c, 5, 0x878, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__IPU_DIAGB_7 IOMUX_PAD(0x6e0, 0x27c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 IOMUX_PAD(0x6e0, 0x27c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA1__ATA_DATA_1 IOMUX_PAD(0x6e4, 0x280, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC3_DAT6 IOMUX_PAD(0x6e4, 0x280, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 IOMUX_PAD(0x6e4, 0x280, 2, 0x9b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK IOMUX_PAD(0x6e4, 0x280, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ESDHC2_DAT6 IOMUX_PAD(0x6e4, 0x280, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__GPIO2_14 IOMUX_PAD(0x6e4, 0x280, 5, 0x87c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__IPU_DIAGB_8 IOMUX_PAD(0x6e4, 0x280, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 IOMUX_PAD(0x6e4, 0x280, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA2__ATA_DATA_2 IOMUX_PAD(0x6e8, 0x284, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC3_DAT7 IOMUX_PAD(0x6e8, 0x284, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 IOMUX_PAD(0x6e8, 0x284, 2, 0x9b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS IOMUX_PAD(0x6e8, 0x284, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ESDHC2_DAT7 IOMUX_PAD(0x6e8, 0x284, 4, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__GPIO2_15 IOMUX_PAD(0x6e8, 0x284, 5, 0x880, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__IPU_DIAGB_9 IOMUX_PAD(0x6e8, 0x284, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 IOMUX_PAD(0x6e8, 0x284, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA3__ATA_DATA_3 IOMUX_PAD(0x6e8, 0x288, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ESDHC3_CLK IOMUX_PAD(0x6e8, 0x288, 1, 0x814, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 IOMUX_PAD(0x6e8, 0x288, 2, 0x9b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__CSPI2_SCLK IOMUX_PAD(0x6e8, 0x288, 4, 0x7e0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__GPIO2_16 IOMUX_PAD(0x6e8, 0x288, 5, 0x884, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__IPU_DIAGB_10 IOMUX_PAD(0x6e8, 0x288, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 IOMUX_PAD(0x6e8, 0x288, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA4__ATA_DATA_4 IOMUX_PAD(0x6f0, 0x28c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ESDHC3_CMD IOMUX_PAD(0x6f0, 0x28c, 1, 0x818, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 IOMUX_PAD(0x6f0, 0x28c, 2, 0x9bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__GPIO2_17 IOMUX_PAD(0x6f0, 0x28c, 5, 0x888, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__IPU_DIAGB_11 IOMUX_PAD(0x6f0, 0x28c, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 IOMUX_PAD(0x6f0, 0x28c, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA5__ATA_DATA_5 IOMUX_PAD(0x6f4, 0x290, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 IOMUX_PAD(0x6f4, 0x290, 2, 0x9c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__GPIO2_18 IOMUX_PAD(0x6f4, 0x290, 5, 0x88c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__IPU_DIAGB_12 IOMUX_PAD(0x6f4, 0x290, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 IOMUX_PAD(0x6f4, 0x290, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA6__ATA_DATA_6 IOMUX_PAD(0x6f8, 0x294, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__CAN1_TXCAN IOMUX_PAD(0x6f8, 0x294, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__UART1_DTR IOMUX_PAD(0x6f8, 0x294, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD IOMUX_PAD(0x6f8, 0x294, 3, 0x7b4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__GPIO2_19 IOMUX_PAD(0x6f8, 0x294, 5, 0x890, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA6__IPU_DIAGB_13 IOMUX_PAD(0x6f8, 0x294, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA7__ATA_DATA_7 IOMUX_PAD(0x6fc, 0x298, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__CAN1_RXCAN IOMUX_PAD(0x6fc, 0x298, 1, 0x7c8, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__UART1_DSR IOMUX_PAD(0x6fc, 0x298, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD IOMUX_PAD(0x6fc, 0x298, 3, 0x7b0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__GPIO2_20 IOMUX_PAD(0x6fc, 0x298, 5, 0x898, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA7__IPU_DIAGB_14 IOMUX_PAD(0x6fc, 0x298, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA8__ATA_DATA_8 IOMUX_PAD(0x700, 0x29c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART3_RTS IOMUX_PAD(0x700, 0x29c, 1, 0x99c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__UART1_RI IOMUX_PAD(0x700, 0x29c, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC IOMUX_PAD(0x700, 0x29c, 3, 0x7c0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__GPIO2_21 IOMUX_PAD(0x700, 0x29c, 5, 0x89c, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA8__IPU_DIAGB_15 IOMUX_PAD(0x700, 0x29c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA9__ATA_DATA_9 IOMUX_PAD(0x704, 0x2a0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART3_CTS IOMUX_PAD(0x704, 0x2a0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__UART1_DCD IOMUX_PAD(0x704, 0x2a0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS IOMUX_PAD(0x704, 0x2a0, 3, 0x7c4, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__GPIO2_22 IOMUX_PAD(0x704, 0x2a0, 5, 0x8a0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA9__IPU_DIAGB_16 IOMUX_PAD(0x704, 0x2a0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA10__ATA_DATA_10 IOMUX_PAD(0x708, 0x2a4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__UART3_RXD_MUX IOMUX_PAD(0x708, 0x2a4, 1, 0x9a0, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC IOMUX_PAD(0x708, 0x2a4, 3, 0x7b8, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__GPIO2_23 IOMUX_PAD(0x708, 0x2a4, 5, 0x8a4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA10__IPU_DIAGB_17 IOMUX_PAD(0x708, 0x2a4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA11__ATA_DATA_11 IOMUX_PAD(0x70c, 0x2a8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__UART3_TXD_MUX IOMUX_PAD(0x70c, 0x2a8, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS IOMUX_PAD(0x70c, 0x2a8, 3, 0x7bc, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__GPIO2_24 IOMUX_PAD(0x70c, 0x2a8, 5, 0x8a8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA11__IPU_DIAGB_18 IOMUX_PAD(0x70c, 0x2a8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA12__ATA_DATA_12 IOMUX_PAD(0x710, 0x2ac, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__I2C3_SCL IOMUX_PAD(0x710, 0x2ac, 1, 0x91c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__GPIO2_25 IOMUX_PAD(0x710, 0x2ac, 5, 0x8ac, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA12__IPU_DIAGB_19 IOMUX_PAD(0x710, 0x2ac, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA13__ATA_DATA_13 IOMUX_PAD(0x714, 0x2b0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__I2C3_SDA IOMUX_PAD(0x714, 0x2b0, 1, 0x920, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__GPIO2_26 IOMUX_PAD(0x714, 0x2b0, 5, 0x8b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA13__IPU_DIAGB_20 IOMUX_PAD(0x714, 0x2b0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA14__ATA_DATA_14 IOMUX_PAD(0x718, 0x2b4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_CSI_D_0 IOMUX_PAD(0x718, 0x2b4, 1, 0x930, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__KPP_ROW_0 IOMUX_PAD(0x718, 0x2b4, 3, 0x970, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__GPIO2_27 IOMUX_PAD(0x718, 0x2b4, 5, 0x8b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA14__IPU_DIAGB_21 IOMUX_PAD(0x718, 0x2b4, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DATA15__ATA_DATA_15 IOMUX_PAD(0x71c, 0x2b8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_CSI_D_1 IOMUX_PAD(0x71c, 0x2b8, 1, 0x934, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__KPP_ROW_1 IOMUX_PAD(0x71c, 0x2b8, 3, 0x974, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__GPIO2_28 IOMUX_PAD(0x71c, 0x2b8, 5, 0x8b8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DATA15__IPU_DIAGB_22 IOMUX_PAD(0x71c, 0x2b8, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_INTRQ__ATA_INTRQ IOMUX_PAD(0x720, 0x2bc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 IOMUX_PAD(0x720, 0x2bc, 1, 0x938, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__KPP_ROW_2 IOMUX_PAD(0x720, 0x2bc, 3, 0x978, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__GPIO2_29 IOMUX_PAD(0x720, 0x2bc, 5, 0x8bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 IOMUX_PAD(0x720, 0x2bc, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN IOMUX_PAD(0x724, 0x2c0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 IOMUX_PAD(0x724, 0x2c0, 1, 0x93c, 3, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 IOMUX_PAD(0x724, 0x2c0, 3, 0x97c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__GPIO2_30 IOMUX_PAD(0x724, 0x2c0, 5, 0x8c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 IOMUX_PAD(0x724, 0x2c0, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DMARQ__ATA_DMARQ IOMUX_PAD(0x728, 0x2c4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 IOMUX_PAD(0x728, 0x2c4, 1, 0x940, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__KPP_COL_0 IOMUX_PAD(0x728, 0x2c4, 3, 0x950, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__GPIO2_31 IOMUX_PAD(0x728, 0x2c4, 5, 0x8c8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 IOMUX_PAD(0x728, 0x2c4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 IOMUX_PAD(0x728, 0x2c4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA0__ATA_DA_0 IOMUX_PAD(0x72c, 0x2c8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_CSI_D_5 IOMUX_PAD(0x72c, 0x2c8, 1, 0x944, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__KPP_COL_1 IOMUX_PAD(0x72c, 0x2c8, 3, 0x954, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__GPIO3_0 IOMUX_PAD(0x72c, 0x2c8, 5, 0x8e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__IPU_DIAGB_26 IOMUX_PAD(0x72c, 0x2c8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 IOMUX_PAD(0x72c, 0x2c8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA1__ATA_DA_1 IOMUX_PAD(0x730, 0x2cc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_CSI_D_6 IOMUX_PAD(0x730, 0x2cc, 1, 0x948, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__KPP_COL_2 IOMUX_PAD(0x730, 0x2cc, 3, 0x958, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__GPIO3_1 IOMUX_PAD(0x730, 0x2cc, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__IPU_DIAGB_27 IOMUX_PAD(0x730, 0x2cc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 IOMUX_PAD(0x730, 0x2cc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_ATA_DA2__ATA_DA_2 IOMUX_PAD(0x734, 0x2d0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_CSI_D_7 IOMUX_PAD(0x734, 0x2d0, 1, 0x94c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__KPP_COL_3 IOMUX_PAD(0x734, 0x2d0, 3, 0x95c, 2, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__GPIO3_2 IOMUX_PAD(0x734, 0x2d0, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__IPU_DIAGB_28 IOMUX_PAD(0x734, 0x2d0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 IOMUX_PAD(0x734, 0x2d0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_CLK__MLB_MLBCLK IOMUX_PAD(0x738, 0x2d4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_CLK__GPIO3_3 IOMUX_PAD(0x738, 0x2d4, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_DAT__MLB_MLBDAT IOMUX_PAD(0x73c, 0x2d8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_DAT__GPIO3_4 IOMUX_PAD(0x73c, 0x2d8, 5, 0x904, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_MLB_SIG__MLB_MLBSIG IOMUX_PAD(0x740, 0x2dc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_MLB_SIG__GPIO3_5 IOMUX_PAD(0x740, 0x2dc, 5, 0x908, 1, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_CLK__FEC_TX_CLK IOMUX_PAD(0x744, 0x2e0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 IOMUX_PAD(0x744, 0x2e0, 1, 0x804, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX IOMUX_PAD(0x744, 0x2e0, 2, 0x9a0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR IOMUX_PAD(0x744, 0x2e0, 3, 0x9ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__CSPI2_MOSI IOMUX_PAD(0x744, 0x2e0, 4, 0x7ec, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__GPIO3_6 IOMUX_PAD(0x744, 0x2e0, 5, 0x90c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC IOMUX_PAD(0x744, 0x2e0, 6, 0x928, 5, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 IOMUX_PAD(0x744, 0x2e0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_CLK__FEC_RX_CLK IOMUX_PAD(0x748, 0x2e4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 IOMUX_PAD(0x748, 0x2e4, 1, 0x808, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX IOMUX_PAD(0x748, 0x2e4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP IOMUX_PAD(0x748, 0x2e4, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__CSPI2_MISO IOMUX_PAD(0x748, 0x2e4, 4, 0x7e8, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__GPIO3_7 IOMUX_PAD(0x748, 0x2e4, 5, 0x910, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I IOMUX_PAD(0x748, 0x2e4, 6, 0x92c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 IOMUX_PAD(0x748, 0x2e4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_DV__FEC_RX_DV IOMUX_PAD(0x74c, 0x2e8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 IOMUX_PAD(0x74c, 0x2e8, 1, 0x80c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__UART3_RTS IOMUX_PAD(0x74c, 0x2e8, 2, 0x99c, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT IOMUX_PAD(0x74c, 0x2e8, 3, 0x9f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__CSPI2_SCLK IOMUX_PAD(0x74c, 0x2e8, 4, 0x7e0, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__GPIO3_8 IOMUX_PAD(0x74c, 0x2e8, 5, 0x914, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK IOMUX_PAD(0x74c, 0x2e8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 IOMUX_PAD(0x74c, 0x2e8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_COL__FEC_COL IOMUX_PAD(0x750, 0x2ec, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ESDHC1_DAT7 IOMUX_PAD(0x750, 0x2ec, 1, 0x810, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__UART3_CTS IOMUX_PAD(0x750, 0x2ec, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 IOMUX_PAD(0x750, 0x2ec, 3, 0x9cc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__CSPI2_RDY IOMUX_PAD(0x750, 0x2ec, 4, 0x7e4, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__GPIO3_9 IOMUX_PAD(0x750, 0x2ec, 5, 0x918, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__IPU_DISPB_SER_RS IOMUX_PAD(0x750, 0x2ec, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 IOMUX_PAD(0x750, 0x2ec, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA0__FEC_RDATA_0 IOMUX_PAD(0x754, 0x2f0, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__PWM_PWMO IOMUX_PAD(0x754, 0x2f0, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__UART3_DTR IOMUX_PAD(0x754, 0x2f0, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 IOMUX_PAD(0x754, 0x2f0, 3, 0x9d0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__CSPI2_SS0 IOMUX_PAD(0x754, 0x2f0, 4, 0x7f0, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__GPIO3_10 IOMUX_PAD(0x754, 0x2f0, 5, 0x8ec, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 IOMUX_PAD(0x754, 0x2f0, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 IOMUX_PAD(0x754, 0x2f0, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA0__FEC_TDATA_0 IOMUX_PAD(0x758, 0x2f4, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 IOMUX_PAD(0x758, 0x2f4, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__UART3_DSR IOMUX_PAD(0x758, 0x2f4, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 IOMUX_PAD(0x758, 0x2f4, 3, 0x9d4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__CSPI2_SS1 IOMUX_PAD(0x758, 0x2f4, 4, 0x7f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__GPIO3_11 IOMUX_PAD(0x758, 0x2f4, 5, 0x8f0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 IOMUX_PAD(0x758, 0x2f4, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 IOMUX_PAD(0x758, 0x2f4, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_EN__FEC_TX_EN IOMUX_PAD(0x75c, 0x2f8, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 IOMUX_PAD(0x75c, 0x2f8, 1, 0x998, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__UART3_RI IOMUX_PAD(0x75c, 0x2f8, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 IOMUX_PAD(0x75c, 0x2f8, 3, 0x9d8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__GPIO3_12 IOMUX_PAD(0x75c, 0x2f8, 5, 0x8f4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS IOMUX_PAD(0x75c, 0x2f8, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 IOMUX_PAD(0x75c, 0x2f8, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDC__FEC_MDC IOMUX_PAD(0x760, 0x2fc, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__CAN2_TXCAN IOMUX_PAD(0x760, 0x2fc, 1, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__UART3_DCD IOMUX_PAD(0x760, 0x2fc, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 IOMUX_PAD(0x760, 0x2fc, 3, 0x9dc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__GPIO3_13 IOMUX_PAD(0x760, 0x2fc, 5, 0x8f8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__IPU_DISPB_WR IOMUX_PAD(0x760, 0x2fc, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 IOMUX_PAD(0x760, 0x2fc, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x764, 0x300, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__CAN2_RXCAN IOMUX_PAD(0x764, 0x300, 1, 0x7cc, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 IOMUX_PAD(0x764, 0x300, 3, 0x9e0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__GPIO3_14 IOMUX_PAD(0x764, 0x300, 5, 0x8fc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__IPU_DISPB_RD IOMUX_PAD(0x764, 0x300, 6, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 IOMUX_PAD(0x764, 0x300, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TX_ERR__FEC_TX_ERR IOMUX_PAD(0x768, 0x304, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__OWIRE_LINE IOMUX_PAD(0x768, 0x304, 1, 0x990, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK IOMUX_PAD(0x768, 0x304, 2, 0x994, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 IOMUX_PAD(0x768, 0x304, 3, 0x9e4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__GPIO3_15 IOMUX_PAD(0x768, 0x304, 5, 0x900, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC IOMUX_PAD(0x768, 0x304, 6, 0x924, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 IOMUX_PAD(0x768, 0x304, 7, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RX_ERR__FEC_RX_ERR IOMUX_PAD(0x76c, 0x308, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 IOMUX_PAD(0x76c, 0x308, 1, 0x930, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 IOMUX_PAD(0x76c, 0x308, 3, 0x9e8, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__KPP_COL_4 IOMUX_PAD(0x76c, 0x308, 4, 0x960, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__GPIO3_16 IOMUX_PAD(0x76c, 0x308, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO IOMUX_PAD(0x76c, 0x308, 6, 0x92c, 5, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_CRS__FEC_CRS IOMUX_PAD(0x770, 0x30c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_CSI_D_1 IOMUX_PAD(0x770, 0x30c, 1, 0x934, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR IOMUX_PAD(0x770, 0x30c, 3, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__KPP_COL_5 IOMUX_PAD(0x770, 0x30c, 4, 0x964, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__GPIO3_17 IOMUX_PAD(0x770, 0x30c, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_CRS__IPU_FLASH_STROBE IOMUX_PAD(0x770, 0x30c, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA1__FEC_RDATA_1 IOMUX_PAD(0x774, 0x310, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 IOMUX_PAD(0x774, 0x310, 1, 0x938, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC IOMUX_PAD(0x774, 0x310, 2, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC IOMUX_PAD(0x774, 0x310, 3, 0x9f4, 2, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__KPP_COL_6 IOMUX_PAD(0x774, 0x310, 4, 0x968, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__GPIO3_18 IOMUX_PAD(0x774, 0x310, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 IOMUX_PAD(0x774, 0x310, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA1__FEC_TDATA_1 IOMUX_PAD(0x778, 0x314, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 IOMUX_PAD(0x778, 0x314, 1, 0x93c, 4, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS IOMUX_PAD(0x778, 0x314, 2, 0x7bc, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__KPP_COL_7 IOMUX_PAD(0x778, 0x314, 4, 0x96c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__GPIO3_19 IOMUX_PAD(0x778, 0x314, 5, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 IOMUX_PAD(0x778, 0x314, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA2__FEC_RDATA_2 IOMUX_PAD(0x77c, 0x318, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 IOMUX_PAD(0x77c, 0x318, 1, 0x940, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD IOMUX_PAD(0x77c, 0x318, 2, 0x7b4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__KPP_ROW_4 IOMUX_PAD(0x77c, 0x318, 4, 0x980, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA2__GPIO3_20 IOMUX_PAD(0x77c, 0x318, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA2__FEC_TDATA_2 IOMUX_PAD(0x780, 0x31c, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 IOMUX_PAD(0x780, 0x31c, 1, 0x944, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD IOMUX_PAD(0x780, 0x31c, 2, 0x7b0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__KPP_ROW_5 IOMUX_PAD(0x780, 0x31c, 4, 0x984, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA2__GPIO3_21 IOMUX_PAD(0x780, 0x31c, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_RDATA3__FEC_RDATA_3 IOMUX_PAD(0x784, 0x320, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 IOMUX_PAD(0x784, 0x320, 1, 0x948, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC IOMUX_PAD(0x784, 0x320, 2, 0x7c0, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__KPP_ROW_6 IOMUX_PAD(0x784, 0x320, 4, 0x988, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_RDATA3__GPIO3_22 IOMUX_PAD(0x784, 0x320, 6, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_FEC_TDATA3__FEC_TDATA_3 IOMUX_PAD(0x788, 0x324, 0, 0x0, 0, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 IOMUX_PAD(0x788, 0x324, 1, 0x94c, 3, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS IOMUX_PAD(0x788, 0x324, 2, 0x7c4, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__KPP_ROW_7 IOMUX_PAD(0x788, 0x324, 4, 0x98c, 1, NO_PAD_CTRL)
+#define MX35_PAD_FEC_TDATA3__GPIO3_23 IOMUX_PAD(0x788, 0x324, 5, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK IOMUX_PAD(0x78c, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+#define MX35_PAD_TEST_MODE__TCU_TEST_MODE IOMUX_PAD(0x790, 0x0, 0, 0x0, 0, NO_PAD_CTRL)
+
+
+#endif /* __MACH_IOMUX_MX35_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_IOMUX_V3_H__
+#define __MACH_IOMUX_V3_H__
+
+/*
+ * build IOMUX_PAD structure
+ *
+ * This iomux scheme is based around pads, which are the physical balls
+ * on the processor.
+ *
+ * - Each pad has a pad control register (IOMUXC_SW_PAD_CTRL_x) which controls
+ * things like driving strength and pullup/pulldown.
+ * - Each pad can have but not necessarily does have an output routing register
+ * (IOMUXC_SW_MUX_CTL_PAD_x).
+ * - Each pad can have but not necessarily does have an input routing register
+ * (IOMUXC_x_SELECT_INPUT)
+ *
+ * The three register sets do not have a fixed offset to each other,
+ * hence we order this table by pad control registers (which all pads
+ * have) and put the optional i/o routing registers into additional
+ * fields.
+ *
+ * The naming convention for the pad modes is MX35_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named
+ * GPIO_<unit>_<num>
+ *
+ */
+
+struct pad_desc {
+ unsigned mux_ctrl_ofs:12; /* IOMUXC_SW_MUX_CTL_PAD offset */
+ unsigned mux_mode:8;
+ unsigned pad_ctrl_ofs:12; /* IOMUXC_SW_PAD_CTRL offset */
+#define NO_PAD_CTRL (1 << 16)
+ unsigned pad_ctrl:17;
+ unsigned select_input_ofs:12; /* IOMUXC_SELECT_INPUT offset */
+ unsigned select_input:3;
+};
+
+#define IOMUX_PAD(_pad_ctrl_ofs, _mux_ctrl_ofs, _mux_mode, _select_input_ofs, \
+ _select_input, _pad_ctrl) \
+ { \
+ .mux_ctrl_ofs = _mux_ctrl_ofs, \
+ .mux_mode = _mux_mode, \
+ .pad_ctrl_ofs = _pad_ctrl_ofs, \
+ .pad_ctrl = _pad_ctrl, \
+ .select_input_ofs = _select_input_ofs, \
+ .select_input = _select_input, \
+ }
+
+/*
+ * Use to set PAD control
+ */
+#define PAD_CTL_DRIVE_VOLTAGE_3_3_V 0
+#define PAD_CTL_DRIVE_VOLTAGE_1_8_V 1
+
+#define PAD_CTL_NO_HYSTERESIS 0
+#define PAD_CTL_HYSTERESIS 1
+
+#define PAD_CTL_PULL_DISABLED 0x0
+#define PAD_CTL_PULL_KEEPER 0xa
+#define PAD_CTL_PULL_DOWN_100K 0xc
+#define PAD_CTL_PULL_UP_47K 0xd
+#define PAD_CTL_PULL_UP_100K 0xe
+#define PAD_CTL_PULL_UP_22K 0xf
+
+#define PAD_CTL_OUTPUT_CMOS 0
+#define PAD_CTL_OUTPUT_OPEN_DRAIN 1
+
+#define PAD_CTL_DRIVE_STRENGTH_NORM 0
+#define PAD_CTL_DRIVE_STRENGTH_HIGH 1
+#define PAD_CTL_DRIVE_STRENGTH_MAX 2
+
+#define PAD_CTL_SLEW_RATE_SLOW 0
+#define PAD_CTL_SLEW_RATE_FAST 1
+
+/*
+ * setups a single pad:
+ * - reserves the pad so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
+
+/*
+ * setups mutliple pads
+ * convenient way to call the above function with tables
+ */
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
+
+/*
+ * releases a single pad:
+ * - make it available for a future use by another driver
+ * - DOES NOT reconfigure the IOMUX in its reset state
+ */
+void mxc_iomux_v3_release_pad(struct pad_desc *pad);
+
+/*
+ * releases multiple pads
+ * convenvient way to call the above function with tables
+ */
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
+
+#endif /* __MACH_IOMUX_V3_H__*/
+
#define CONSISTENT_DMA_SIZE SZ_4M
#endif /* CONFIG_MX1_VIDEO */
+#if defined(CONFIG_MX3_VIDEO)
+/*
+ * Increase size of DMA-consistent memory region.
+ * This is required for mx3 camera driver to capture at least two QXGA frames.
+ */
+#define CONSISTENT_DMA_SIZE SZ_8M
+#endif /* CONFIG_MX3_VIDEO */
+
#endif /* __ASM_ARCH_MXC_MEMORY_H__ */
#define DMA_REQ_UART1_T 30
#define DMA_REQ_UART1_R 31
-/* mandatory for CONFIG_LL_DEBUG */
+/* mandatory for CONFIG_DEBUG_LL */
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR IO_ADDRESS(UART1_BASE_ADDR)
#define CS4_SIZE SZ_32M
#define CS5_BASE_ADDR 0xB6000000
+#define CS5_BASE_ADDR_VIRT 0xF6000000
+#define CS5_SIZE SZ_32M
+
#define PCMCIA_MEM_BASE_ADDR 0xBC000000
/*
#define CS4_IO_ADDRESS(x) \
(((x) - CS4_BASE_ADDR) + CS4_BASE_ADDR_VIRT)
+#define CS5_IO_ADDRESS(x) \
+ (((x) - CS5_BASE_ADDR) + CS5_BASE_ADDR_VIRT)
+
#define X_MEMC_IO_ADDRESS(x) \
(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
+++ /dev/null
-/*
- * mxc_timer.h
- *
- * Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
- *
- * Platform independent (i.MX1, i.MX2, i.MX3) definition for timer handling.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor,
- * Boston, MA 02110-1301, USA.
- */
-
-#ifndef __PLAT_MXC_TIMER_H
-#define __PLAT_MXC_TIMER_H
-
-#include <linux/clk.h>
-#include <mach/hardware.h>
-
-#ifdef CONFIG_ARCH_MX1
-#define TIMER_BASE IO_ADDRESS(TIM1_BASE_ADDR)
-#define TIMER_INTERRUPT TIM1_INT
-
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_CLK_TIN (3<<1)
-#define TCTL_CLK_32 (4<<1)
-
-#define MXC_TCTL 0x00
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX1 */
-
-#ifdef CONFIG_ARCH_MX2
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT1
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL TCTL_CLK_PCLK1
-#define TCTL_CLK_PCLK1 (1<<1)
-#define TCTL_CLK_PCLK1_4 (2<<1)
-#define TCTL_IRQEN (1<<4)
-#define TCTL_FRR (1<<8)
-#define MXC_TPRER 0x04
-#define MXC_TCMP 0x08
-#define MXC_TCR 0x0c
-#define MXC_TCN 0x10
-#define MXC_TSTAT 0x14
-#define TSTAT_CAPT (1<<1)
-#define TSTAT_COMP (1<<0)
-
-static inline void gpt_irq_disable(void)
-{
- unsigned int tmp;
-
- tmp = __raw_readl(TIMER_BASE + MXC_TCTL);
- __raw_writel(tmp & ~TCTL_IRQEN, TIMER_BASE + MXC_TCTL);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCTL) | TCTL_IRQEN,
- TIMER_BASE + MXC_TCTL);
-}
-
-static void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_CAPT | TSTAT_COMP, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX2 */
-
-#ifdef CONFIG_ARCH_MX3
-#define TIMER_BASE IO_ADDRESS(GPT1_BASE_ADDR)
-#define TIMER_INTERRUPT MXC_INT_GPT
-
-#define MXC_TCTL 0x00
-#define TCTL_VAL (TCTL_CLK_IPG | TCTL_WAITEN)
-#define TCTL_CLK_IPG (1<<6)
-#define TCTL_FRR (1<<9)
-#define TCTL_WAITEN (1<<3)
-
-#define MXC_TPRER 0x04
-#define MXC_TSTAT 0x08
-#define TSTAT_OF1 (1<<0)
-#define TSTAT_OF2 (1<<1)
-#define TSTAT_OF3 (1<<2)
-#define TSTAT_IF1 (1<<3)
-#define TSTAT_IF2 (1<<4)
-#define TSTAT_ROV (1<<5)
-#define MXC_IR 0x0c
-#define MXC_TCMP 0x10
-#define MXC_TCMP2 0x14
-#define MXC_TCMP3 0x18
-#define MXC_TCR 0x1c
-#define MXC_TCN 0x24
-
-static inline void gpt_irq_disable(void)
-{
- __raw_writel(0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_enable(void)
-{
- __raw_writel(1<<0, TIMER_BASE + MXC_IR);
-}
-
-static inline void gpt_irq_acknowledge(void)
-{
- __raw_writel(TSTAT_OF1, TIMER_BASE + MXC_TSTAT);
-}
-#endif /* CONFIG_ARCH_MX3 */
-
-#define TCTL_SWR (1<<15)
-#define TCTL_CC (1<<10)
-#define TCTL_OM (1<<9)
-#define TCTL_CAP_RIS (1<<6)
-#define TCTL_CAP_FAL (2<<6)
-#define TCTL_CAP_RIS_FAL (3<<6)
-#define TCTL_CAP_ENA (1<<5)
-#define TCTL_TEN (1<<0)
-
-#endif
struct imxusb_platform_data {
int (*init)(struct device *);
- int (*exit)(struct device *);
+ void (*exit)(struct device *);
};
#endif /* __ASM_ARCH_MXC_USB */
--- /dev/null
+/*
+ * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach/map.h>
+#include <mach/iomux-v3.h>
+
+#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
+
+static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
+
+/*
+ * setups a single pin:
+ * - reserves the pin so that it is not claimed by another driver
+ * - setups the iomux according to the configuration
+ */
+int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
+{
+ unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+ if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
+ return -EBUSY;
+ if (pad->mux_ctrl_ofs)
+ __raw_writel(pad->mux_mode, IOMUX_BASE + pad->mux_ctrl_ofs);
+
+ if (pad->select_input_ofs)
+ __raw_writel(pad->select_input,
+ IOMUX_BASE + pad->select_input_ofs);
+
+ if (!(pad->pad_ctrl & NO_PAD_CTRL))
+ __raw_writel(pad->pad_ctrl, IOMUX_BASE + pad->pad_ctrl_ofs);
+ return 0;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_pad);
+
+int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
+{
+ struct pad_desc *p = pad_list;
+ int i;
+ int ret;
+
+ for (i = 0; i < count; i++) {
+ ret = mxc_iomux_v3_setup_pad(p);
+ if (ret)
+ goto setup_error;
+ p++;
+ }
+ return 0;
+
+setup_error:
+ mxc_iomux_v3_release_multiple_pads(pad_list, i);
+ return ret;
+}
+EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
+
+void mxc_iomux_v3_release_pad(struct pad_desc *pad)
+{
+ unsigned int pad_ofs = pad->pad_ctrl_ofs;
+
+ clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
+
+void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
+{
+ struct pad_desc *p = pad_list;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ mxc_iomux_v3_release_pad(p);
+ p++;
+ }
+}
+EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
#include <asm/mach/irq.h>
#include <mach/hardware.h>
-#define AVIC_BASE IO_ADDRESS(AVIC_BASE_ADDR)
-#define AVIC_INTCNTL (AVIC_BASE + 0x00) /* int control reg */
-#define AVIC_NIMASK (AVIC_BASE + 0x04) /* int mask reg */
-#define AVIC_INTENNUM (AVIC_BASE + 0x08) /* int enable number reg */
-#define AVIC_INTDISNUM (AVIC_BASE + 0x0C) /* int disable number reg */
-#define AVIC_INTENABLEH (AVIC_BASE + 0x10) /* int enable reg high */
-#define AVIC_INTENABLEL (AVIC_BASE + 0x14) /* int enable reg low */
-#define AVIC_INTTYPEH (AVIC_BASE + 0x18) /* int type reg high */
-#define AVIC_INTTYPEL (AVIC_BASE + 0x1C) /* int type reg low */
-#define AVIC_NIPRIORITY(x) (AVIC_BASE + (0x20 + 4 * (7 - (x)))) /* int priority */
-#define AVIC_NIVECSR (AVIC_BASE + 0x40) /* norm int vector/status */
-#define AVIC_FIVECSR (AVIC_BASE + 0x44) /* fast int vector/status */
-#define AVIC_INTSRCH (AVIC_BASE + 0x48) /* int source reg high */
-#define AVIC_INTSRCL (AVIC_BASE + 0x4C) /* int source reg low */
-#define AVIC_INTFRCH (AVIC_BASE + 0x50) /* int force reg high */
-#define AVIC_INTFRCL (AVIC_BASE + 0x54) /* int force reg low */
-#define AVIC_NIPNDH (AVIC_BASE + 0x58) /* norm int pending high */
-#define AVIC_NIPNDL (AVIC_BASE + 0x5C) /* norm int pending low */
-#define AVIC_FIPNDH (AVIC_BASE + 0x60) /* fast int pending high */
-#define AVIC_FIPNDL (AVIC_BASE + 0x64) /* fast int pending low */
-
-#define SYSTEM_PREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x20)
-#define SYSTEM_SREV_REG IO_ADDRESS(IIM_BASE_ADDR + 0x24)
-#define IIM_PROD_REV_SH 3
-#define IIM_PROD_REV_LEN 5
+#define AVIC_INTCNTL 0x00 /* int control reg */
+#define AVIC_NIMASK 0x04 /* int mask reg */
+#define AVIC_INTENNUM 0x08 /* int enable number reg */
+#define AVIC_INTDISNUM 0x0C /* int disable number reg */
+#define AVIC_INTENABLEH 0x10 /* int enable reg high */
+#define AVIC_INTENABLEL 0x14 /* int enable reg low */
+#define AVIC_INTTYPEH 0x18 /* int type reg high */
+#define AVIC_INTTYPEL 0x1C /* int type reg low */
+#define AVIC_NIPRIORITY(x) (0x20 + 4 * (7 - (x))) /* int priority */
+#define AVIC_NIVECSR 0x40 /* norm int vector/status */
+#define AVIC_FIVECSR 0x44 /* fast int vector/status */
+#define AVIC_INTSRCH 0x48 /* int source reg high */
+#define AVIC_INTSRCL 0x4C /* int source reg low */
+#define AVIC_INTFRCH 0x50 /* int force reg high */
+#define AVIC_INTFRCL 0x54 /* int force reg low */
+#define AVIC_NIPNDH 0x58 /* norm int pending high */
+#define AVIC_NIPNDL 0x5C /* norm int pending low */
+#define AVIC_FIPNDH 0x60 /* fast int pending high */
+#define AVIC_FIPNDL 0x64 /* fast int pending low */
+
+static void __iomem *avic_base;
int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
if (irq >= MXC_INTERNAL_IRQS)
return -EINVAL;;
- temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
+ temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8));
temp &= ~mask;
temp |= prio & mask;
- __raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+ __raw_writel(temp, avic_base + AVIC_NIPRIORITY(irq / 8));
return 0;
#else
return -EINVAL;
if (irq < MXC_INTERNAL_IRQS / 2) {
- irqt = __raw_readl(AVIC_INTTYPEL) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEL);
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL);
} else {
irq -= MXC_INTERNAL_IRQS / 2;
- irqt = __raw_readl(AVIC_INTTYPEH) & ~(1 << irq);
- __raw_writel(irqt | (!!type << irq), AVIC_INTTYPEH);
+ irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq);
+ __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH);
}
return 0;
/* Disable interrupt number "irq" in the AVIC */
static void mxc_mask_irq(unsigned int irq)
{
- __raw_writel(irq, AVIC_INTDISNUM);
+ __raw_writel(irq, avic_base + AVIC_INTDISNUM);
}
/* Enable interrupt number "irq" in the AVIC */
static void mxc_unmask_irq(unsigned int irq)
{
- __raw_writel(irq, AVIC_INTENNUM);
+ __raw_writel(irq, avic_base + AVIC_INTENNUM);
}
static struct irq_chip mxc_avic_chip = {
{
int i;
+ avic_base = IO_ADDRESS(AVIC_BASE_ADDR);
+
/* put the AVIC into the reset value with
* all interrupts disabled
*/
- __raw_writel(0, AVIC_INTCNTL);
- __raw_writel(0x1f, AVIC_NIMASK);
+ __raw_writel(0, avic_base + AVIC_INTCNTL);
+ __raw_writel(0x1f, avic_base + AVIC_NIMASK);
/* disable all interrupts */
- __raw_writel(0, AVIC_INTENABLEH);
- __raw_writel(0, AVIC_INTENABLEL);
+ __raw_writel(0, avic_base + AVIC_INTENABLEH);
+ __raw_writel(0, avic_base + AVIC_INTENABLEL);
/* all IRQ no FIQ */
- __raw_writel(0, AVIC_INTTYPEH);
- __raw_writel(0, AVIC_INTTYPEL);
+ __raw_writel(0, avic_base + AVIC_INTTYPEH);
+ __raw_writel(0, avic_base + AVIC_INTTYPEL);
for (i = 0; i < MXC_INTERNAL_IRQS; i++) {
set_irq_chip(i, &mxc_avic_chip);
set_irq_handler(i, handle_level_irq);
/* Set default priority value (0) for all IRQ's */
for (i = 0; i < 8; i++)
- __raw_writel(0, AVIC_NIPRIORITY(i));
+ __raw_writel(0, avic_base + AVIC_NIPRIORITY(i));
/* init architectures chained interrupt handler */
mxc_register_gpios();
printk(KERN_INFO "MXC IRQ initialized\n");
}
+
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pwm.h>
+#include <mach/hardware.h>
+
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC 0x00 /* PWM Control Register */
+#define MX1_PWMS 0x04 /* PWM Sample Register */
+#define MX1_PWMP 0x08 /* PWM Period Register */
+
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR 0x00 /* PWM Control Register */
+#define MX3_PWMSAR 0x0C /* PWM Sample Register */
+#define MX3_PWMPR 0x10 /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_EN (1 << 0)
+
-#if defined CONFIG_ARCH_MX1 || defined CONFIG_ARCH_MX21
-#define PWM_VER_1
-
-#define PWMCR 0x00 /* PWM Control Register */
-#define PWMSR 0x04 /* PWM Sample Register */
-#define PWMPR 0x08 /* PWM Period Register */
-#define PWMCNR 0x0C /* PWM Counter Register */
-
-#define PWMCR_HCTR (1 << 18) /* Halfword FIFO Data Swapping */
-#define PWMCR_BCTR (1 << 17) /* Byte FIFO Data Swapping */
-#define PWMCR_SWR (1 << 16) /* Software Reset */
-#define PWMCR_CLKSRC_PERCLK (0 << 15) /* PERCLK Clock Source */
-#define PWMCR_CLKSRC_CLK32 (1 << 15) /* 32KHz Clock Source */
-#define PWMCR_PRESCALER(x) (((x - 1) & 0x7F) << 8) /* PRESCALER */
-#define PWMCR_IRQ (1 << 7) /* Interrupt Request */
-#define PWMCR_IRQEN (1 << 6) /* Interrupt Request Enable */
-#define PWMCR_FIFOAV (1 << 5) /* FIFO Available */
-#define PWMCR_EN (1 << 4) /* Enables/Disables the PWM */
-#define PWMCR_REPEAT(x) (((x) & 0x03) << 2) /* Sample Repeats */
-#define PWMCR_DIV(x) (((x) & 0x03) << 0) /* Clock divider 2/4/8/16 */
-
-#define MAX_DIV (128 * 16)
-#endif
-
-#if defined CONFIG_MACH_MX27 || defined CONFIG_ARCH_MX31
-#define PWM_VER_2
-
-#define PWMCR 0x00 /* PWM Control Register */
-#define PWMSR 0x04 /* PWM Status Register */
-#define PWMIR 0x08 /* PWM Interrupt Register */
-#define PWMSAR 0x0C /* PWM Sample Register */
-#define PWMPR 0x10 /* PWM Period Register */
-#define PWMCNR 0x14 /* PWM Counter Register */
-
-#define PWMCR_EN (1 << 0) /* Enables/Disables the PWM */
-#define PWMCR_REPEAT(x) (((x) & 0x03) << 1) /* Sample Repeats */
-#define PWMCR_SWR (1 << 3) /* Software Reset */
-#define PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)/* PRESCALER */
-#define PWMCR_CLKSRC(x) (((x) & 0x3) << 16)
-#define PWMCR_CLKSRC_OFF (0 << 16)
-#define PWMCR_CLKSRC_IPG (1 << 16)
-#define PWMCR_CLKSRC_IPG_HIGH (2 << 16)
-#define PWMCR_CLKSRC_CLK32 (3 << 16)
-#define PWMCR_POUTC
-#define PWMCR_HCTR (1 << 20) /* Halfword FIFO Data Swapping */
-#define PWMCR_BCTR (1 << 21) /* Byte FIFO Data Swapping */
-#define PWMCR_DBGEN (1 << 22) /* Debug Mode */
-#define PWMCR_WAITEN (1 << 23) /* Wait Mode */
-#define PWMCR_DOZEN (1 << 24) /* Doze Mode */
-#define PWMCR_STOPEN (1 << 25) /* Stop Mode */
-#define PWMCR_FWM(x) (((x) & 0x3) << 26) /* FIFO Water Mark */
-
-#define MAX_DIV 4096
-#endif
-
-#define PWMS_SAMPLE(x) ((x) & 0xFFFF) /* Contains a two-sample word */
-#define PWMP_PERIOD(x) ((x) & 0xFFFF) /* Represents the PWM's period */
-#define PWMC_COUNTER(x) ((x) & 0xFFFF) /* Represents the current count value */
struct pwm_device {
struct list_head node;
int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
{
- unsigned long long c;
- unsigned long period_cycles, duty_cycles, prescale;
-
if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
return -EINVAL;
- c = clk_get_rate(pwm->clk);
- c = c * period_ns;
- do_div(c, 1000000000);
- period_cycles = c;
-
- prescale = period_cycles / 0x10000 + 1;
-
- period_cycles /= prescale;
- c = (unsigned long long)period_cycles * duty_ns;
- do_div(c, period_ns);
- duty_cycles = c;
-
-#ifdef PWM_VER_2
- writel(duty_cycles, pwm->mmio_base + PWMSAR);
- writel(period_cycles, pwm->mmio_base + PWMPR);
- writel(PWMCR_PRESCALER(prescale - 1) | PWMCR_CLKSRC_IPG_HIGH | PWMCR_EN,
- pwm->mmio_base + PWMCR);
-#elif defined PWM_VER_1
-#error PWM not yet working on MX1 / MX21
-#endif
+ if (cpu_is_mx27() || cpu_is_mx3()) {
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles, prescale;
+ c = clk_get_rate(pwm->clk);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ prescale = period_cycles / 0x10000 + 1;
+
+ period_cycles /= prescale;
+ c = (unsigned long long)period_cycles * duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
+
+ writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
+ writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
+ writel(MX3_PWMCR_PRESCALER(prescale - 1) |
+ MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN,
+ pwm->mmio_base + MX3_PWMCR);
+ } else if (cpu_is_mx1() || cpu_is_mx21()) {
+ /* The PWM subsystem allows for exact frequencies. However,
+ * I cannot connect a scope on my device to the PWM line and
+ * thus cannot provide the program the PWM controller
+ * exactly. Instead, I'm relying on the fact that the
+ * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+ * function group already. So I'll just modify the PWM sample
+ * register to follow the ratio of duty_ns vs. period_ns
+ * accordingly.
+ *
+ * This is good enought for programming the brightness of
+ * the LCD backlight.
+ *
+ * The real implementation would divide PERCLK[0] first by
+ * both the prescaler (/1 .. /128) and then by CLKSEL
+ * (/2 .. /16).
+ */
+ u32 max = readl(pwm->mmio_base + MX1_PWMP);
+ u32 p = max * duty_ns / period_ns;
+ writel(max - p, pwm->mmio_base + MX1_PWMS);
+ } else {
+ BUG();
+ }
return 0;
}
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
-
#include <mach/hardware.h>
#include <asm/mach/time.h>
#include <mach/common.h>
-#include <mach/mxc_timer.h>
+
+/* defines common for all i.MX */
+#define MXC_TCTL 0x00
+#define MXC_TCTL_TEN (1 << 0)
+#define MXC_TPRER 0x04
+
+/* MX1, MX21, MX27 */
+#define MX1_2_TCTL_CLK_PCLK1 (1 << 1)
+#define MX1_2_TCTL_IRQEN (1 << 4)
+#define MX1_2_TCTL_FRR (1 << 8)
+#define MX1_2_TCMP 0x08
+#define MX1_2_TCN 0x10
+#define MX1_2_TSTAT 0x14
+
+/* MX21, MX27 */
+#define MX2_TSTAT_CAPT (1 << 1)
+#define MX2_TSTAT_COMP (1 << 0)
+
+/* MX31, MX35 */
+#define MX3_TCTL_WAITEN (1 << 3)
+#define MX3_TCTL_CLK_IPG (1 << 6)
+#define MX3_TCTL_FRR (1 << 9)
+#define MX3_IR 0x0c
+#define MX3_TSTAT 0x08
+#define MX3_TSTAT_OF1 (1 << 0)
+#define MX3_TCN 0x24
+#define MX3_TCMP 0x10
static struct clock_event_device clockevent_mxc;
static enum clock_event_mode clockevent_mode = CLOCK_EVT_MODE_UNUSED;
-/* clock source */
+static void __iomem *timer_base;
-static cycle_t mxc_get_cycles(struct clocksource *cs)
+static inline void gpt_irq_disable(void)
{
- return __raw_readl(TIMER_BASE + MXC_TCN);
+ unsigned int tmp;
+
+ if (cpu_is_mx3())
+ __raw_writel(0, timer_base + MX3_IR);
+ else {
+ tmp = __raw_readl(timer_base + MXC_TCTL);
+ __raw_writel(tmp & ~MX1_2_TCTL_IRQEN, timer_base + MXC_TCTL);
+ }
+}
+
+static inline void gpt_irq_enable(void)
+{
+ if (cpu_is_mx3())
+ __raw_writel(1<<0, timer_base + MX3_IR);
+ else {
+ __raw_writel(__raw_readl(timer_base + MXC_TCTL) | MX1_2_TCTL_IRQEN,
+ timer_base + MXC_TCTL);
+ }
+}
+
+static void gpt_irq_acknowledge(void)
+{
+ if (cpu_is_mx1())
+ __raw_writel(0, timer_base + MX1_2_TSTAT);
+ if (cpu_is_mx2())
+ __raw_writel(MX2_TSTAT_CAPT | MX2_TSTAT_COMP, timer_base + MX1_2_TSTAT);
+ if (cpu_is_mx3())
+ __raw_writel(MX3_TSTAT_OF1, timer_base + MX3_TSTAT);
+}
+
+static cycle_t mx1_2_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(timer_base + MX1_2_TCN);
+}
+
+static cycle_t mx3_get_cycles(struct clocksource *cs)
+{
+ return __raw_readl(timer_base + MX3_TCN);
}
static struct clocksource clocksource_mxc = {
.name = "mxc_timer1",
.rating = 200,
- .read = mxc_get_cycles,
+ .read = mx1_2_get_cycles,
.mask = CLOCKSOURCE_MASK(32),
.shift = 20,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
{
unsigned int c = clk_get_rate(timer_clk);
+ if (cpu_is_mx3())
+ clocksource_mxc.read = mx3_get_cycles;
+
clocksource_mxc.mult = clocksource_hz2mult(c,
clocksource_mxc.shift);
clocksource_register(&clocksource_mxc);
/* clock event */
-static int mxc_set_next_event(unsigned long evt,
+static int mx1_2_set_next_event(unsigned long evt,
struct clock_event_device *unused)
{
unsigned long tcmp;
- tcmp = __raw_readl(TIMER_BASE + MXC_TCN) + evt;
- __raw_writel(tcmp, TIMER_BASE + MXC_TCMP);
+ tcmp = __raw_readl(timer_base + MX1_2_TCN) + evt;
- return (int)(tcmp - __raw_readl(TIMER_BASE + MXC_TCN)) < 0 ?
+ __raw_writel(tcmp, timer_base + MX1_2_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + MX1_2_TCN)) < 0 ?
+ -ETIME : 0;
+}
+
+static int mx3_set_next_event(unsigned long evt,
+ struct clock_event_device *unused)
+{
+ unsigned long tcmp;
+
+ tcmp = __raw_readl(timer_base + MX3_TCN) + evt;
+
+ __raw_writel(tcmp, timer_base + MX3_TCMP);
+
+ return (int)(tcmp - __raw_readl(timer_base + MX3_TCN)) < 0 ?
-ETIME : 0;
}
if (mode != clockevent_mode) {
/* Set event time into far-far future */
- __raw_writel(__raw_readl(TIMER_BASE + MXC_TCN) - 3,
- TIMER_BASE + MXC_TCMP);
+ if (cpu_is_mx3())
+ __raw_writel(__raw_readl(timer_base + MX3_TCN) - 3,
+ timer_base + MX3_TCMP);
+ else
+ __raw_writel(__raw_readl(timer_base + MX1_2_TCN) - 3,
+ timer_base + MX1_2_TCMP);
+
/* Clear pending interrupt */
gpt_irq_acknowledge();
}
struct clock_event_device *evt = &clockevent_mxc;
uint32_t tstat;
- tstat = __raw_readl(TIMER_BASE + MXC_TSTAT);
+ if (cpu_is_mx3())
+ tstat = __raw_readl(timer_base + MX3_TSTAT);
+ else
+ tstat = __raw_readl(timer_base + MX1_2_TSTAT);
gpt_irq_acknowledge();
.features = CLOCK_EVT_FEAT_ONESHOT,
.shift = 32,
.set_mode = mxc_set_mode,
- .set_next_event = mxc_set_next_event,
+ .set_next_event = mx1_2_set_next_event,
.rating = 200,
};
{
unsigned int c = clk_get_rate(timer_clk);
+ if (cpu_is_mx3())
+ clockevent_mxc.set_next_event = mx3_set_next_event;
+
clockevent_mxc.mult = div_sc(c, NSEC_PER_SEC,
clockevent_mxc.shift);
clockevent_mxc.max_delta_ns =
void __init mxc_timer_init(struct clk *timer_clk)
{
+ uint32_t tctl_val;
+ int irq;
+
clk_enable(timer_clk);
+ if (cpu_is_mx1()) {
+#ifdef CONFIG_ARCH_MX1
+ timer_base = IO_ADDRESS(TIM1_BASE_ADDR);
+ irq = TIM1_INT;
+#endif
+ } else if (cpu_is_mx2()) {
+#ifdef CONFIG_ARCH_MX2
+ timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+ irq = MXC_INT_GPT1;
+#endif
+ } else if (cpu_is_mx3()) {
+#ifdef CONFIG_ARCH_MX3
+ timer_base = IO_ADDRESS(GPT1_BASE_ADDR);
+ irq = MXC_INT_GPT;
+#endif
+ } else
+ BUG();
+
/*
* Initialise to a known state (all timers off, and timing reset)
*/
- __raw_writel(0, TIMER_BASE + MXC_TCTL);
- __raw_writel(0, TIMER_BASE + MXC_TPRER); /* see datasheet note */
- __raw_writel(TCTL_FRR | /* free running */
- TCTL_VAL | /* set clocksource and arch specific bits */
- TCTL_TEN, /* start the timer */
- TIMER_BASE + MXC_TCTL);
+ __raw_writel(0, timer_base + MXC_TCTL);
+ __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
+
+ if (cpu_is_mx3())
+ tctl_val = MX3_TCTL_CLK_IPG | MX3_TCTL_FRR | MX3_TCTL_WAITEN | MXC_TCTL_TEN;
+ else
+ tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
+
+ __raw_writel(tctl_val, timer_base + MXC_TCTL);
/* init and register the timer to the framework */
mxc_clocksource_init(timer_clk);
mxc_clockevent_init(timer_clk);
/* Make irqs happen */
- setup_irq(TIMER_INTERRUPT, &mxc_timer_irq);
+ setup_irq(irq, &mxc_timer_irq);
}
select CPU_V7
select COMMON_CLKDEV
+config ARCH_OMAP4
+ bool "TI OMAP4"
+ select CPU_V7
+ select ARM_GIC
+
endchoice
comment "OMAP Feature Selections"
config OMAP_DEBUG_POWERDOMAIN
bool "Emit debug messages from powerdomain layer"
depends on ARCH_OMAP2 || ARCH_OMAP3
- default n
help
Say Y here if you want to compile in powerdomain layer
debugging messages for OMAP2/3. These messages can
config OMAP_DEBUG_CLOCKDOMAIN
bool "Emit debug messages from clockdomain layer"
depends on ARCH_OMAP2 || ARCH_OMAP3
- default n
help
Say Y here if you want to compile in clockdomain layer
debugging messages for OMAP2/3. These messages can
config OMAP_MBOX_FWK
tristate "Mailbox framework support"
depends on ARCH_OMAP
- default n
help
Say Y here if you want to use OMAP Mailbox framework support for
DSP, IVA1.0 and IVA2 in OMAP1/2/3.
+config OMAP_IOMMU
+ tristate
+
choice
prompt "System timer"
default OMAP_MPU_TIMER
config OMAP_32K_TIMER
bool "Use 32KHz timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to enable the OMAP 32KHz timer.
This timer saves power compared to the OMAP_MPU_TIMER, and has
support for no tick during idle. The 32KHz timer provides less
intra-tick resolution than OMAP_MPU_TIMER. The 32KHz timer is
- currently only available for OMAP16XX, 24XX and 34XX.
+ currently only available for OMAP16XX, 24XX, 34XX and OMAP4.
endchoice
config OMAP_DM_TIMER
bool "Use dual-mode timer"
- depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX
+ depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX || ARCH_OMAP4
help
Select this option if you want to use OMAP Dual-Mode timers.
config OMAP_SERIAL_WAKE
bool "Enable wake-up events for serial ports"
- depends on OMAP_MUX
+ depends on ARCH_OMAP1 && OMAP_MUX
default y
help
Select this option if you want to have your system wake up
obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
+obj-$(CONFIG_OMAP_IOMMU) += iommu.o iovmm.o
obj-$(CONFIG_CPU_FREQ) += cpu-omap.o
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
* Standard clock functions defined in include/linux/clk.h
*-------------------------------------------------------------------------*/
+/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
+ * clock framework is not up , it is defined here to avoid rework in
+ * every driver. Also dummy prcm reset function is added */
+
+/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
+#if defined(CONFIG_ARCH_OMAP4)
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_put);
+
+void omap2_clk_prepare_for_reboot(void)
+{
+}
+EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
+
+void omap_prcm_arch_reset(char mode)
+{
+}
+EXPORT_SYMBOL(omap_prcm_arch_reset);
+#endif
int clk_enable(struct clk *clk)
{
unsigned long flags;
int ret = 0;
+ if (cpu_is_omap44xx())
+ /* OMAP4 clk framework not supported yet */
+ return 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
unsigned long flags;
int ret = -EINVAL;
+ if (cpu_is_omap44xx())
+ /* OMAP4 clk framework not supported yet */
+ return 0;
if (clk == NULL || IS_ERR(clk) || parent == NULL || IS_ERR(parent))
return ret;
}
/**
- * clk_init_one - initialize any fields in the struct clk before clk init
+ * clk_preinit - initialize any fields in the struct clk before clk init
* @clk: struct clk * to initialize
*
* Initialize any struct clk fields needed before normal clk initialization
* can run. No return value.
*/
-void clk_init_one(struct clk *clk)
+void clk_preinit(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
}
* linux/arch/arm/plat-omap/common.c
*
* Code common to all OMAP machines.
+ * The file is created by Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
-#include <linux/pm.h>
#include <linux/console.h>
#include <linux/serial.h>
#include <linux/tty.h>
* but systems won't necessarily want to spend resources that way.
*/
-#if defined(CONFIG_ARCH_OMAP16XX)
-#define TIMER_32K_SYNCHRONIZED 0xfffbc410
-#elif defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
-#define TIMER_32K_SYNCHRONIZED (OMAP2_32KSYNCT_BASE + 0x10)
-#endif
+#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
-#ifdef TIMER_32K_SYNCHRONIZED
+#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
#include <linux/clocksource.h>
-static cycle_t omap_32k_read(struct clocksource *cs)
+#ifdef CONFIG_ARCH_OMAP16XX
+static cycle_t omap16xx_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
+}
+#else
+#define omap16xx_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2420
+static cycle_t omap2420_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2420_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP2430
+static cycle_t omap2430_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap2430_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP34XX
+static cycle_t omap34xx_32k_read(struct clocksource *cs)
+{
+ return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap34xx_32k_read NULL
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+static cycle_t omap44xx_32k_read(struct clocksource *cs)
{
- return omap_readl(TIMER_32K_SYNCHRONIZED);
+ return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
+}
+#else
+#define omap44xx_32k_read NULL
+#endif
+
+/*
+ * Kernel assumes that sched_clock can be called early but may not have
+ * things ready yet.
+ */
+static cycle_t omap_32k_read_dummy(struct clocksource *cs)
+{
+ return 0;
}
static struct clocksource clocksource_32k = {
.name = "32k_counter",
.rating = 250,
- .read = omap_32k_read,
+ .read = omap_32k_read_dummy,
.mask = CLOCKSOURCE_MASK(32),
.shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
{
unsigned long long ret;
- ret = (unsigned long long)omap_32k_read(&clocksource_32k);
+ ret = (unsigned long long)clocksource_32k.read(&clocksource_32k);
ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
return ret;
}
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
struct clk *sync_32k_ick;
+ if (cpu_is_omap16xx())
+ clocksource_32k.read = omap16xx_32k_read;
+ else if (cpu_is_omap2420())
+ clocksource_32k.read = omap2420_32k_read;
+ else if (cpu_is_omap2430())
+ clocksource_32k.read = omap2430_32k_read;
+ else if (cpu_is_omap34xx())
+ clocksource_32k.read = omap34xx_32k_read;
+ else if (cpu_is_omap44xx())
+ clocksource_32k.read = omap44xx_32k_read;
+ else
+ return -ENODEV;
+
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
if (sync_32k_ick)
clk_enable(sync_32k_ick);
}
arch_initcall(omap_init_clocksource_32k);
-#endif /* TIMER_32K_SYNCHRONIZED */
+#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
/* Global address base setup code */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
-static struct omap_globals *omap2_globals;
-
-static void __init __omap2_set_globals(void)
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
{
omap2_set_globals_tap(omap2_globals);
omap2_set_globals_sdrc(omap2_globals);
void __init omap2_set_globals_242x(void)
{
- omap2_globals = &omap242x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap242x_globals);
}
#endif
void __init omap2_set_globals_243x(void)
{
- omap2_globals = &omap243x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap243x_globals);
}
#endif
void __init omap2_set_globals_343x(void)
{
- omap2_globals = &omap343x_globals;
- __omap2_set_globals();
+ __omap2_set_globals(&omap343x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+ .class = OMAP443X_CLASS,
+ .tap = OMAP2_IO_ADDRESS(0x4830a000),
+ .ctrl = OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
+ .prm = OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
+ .cm = OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+};
+
+void __init omap2_set_globals_443x(void)
+{
+ omap2_set_globals_tap(&omap4_globals);
+ omap2_set_globals_control(&omap4_globals);
}
#endif
wdt_resources[0].start = 0x49016000; /* WDT2 */
else if (cpu_is_omap343x())
wdt_resources[0].start = 0x48314000; /* WDT2 */
+ else if (cpu_is_omap44xx())
+ wdt_resources[0].start = 0x4a314000;
else
return;
* Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
* Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* Support functions for the OMAP internal DMA channels.
*
* This program is free software; you can redistribute it and/or modify
void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
{
- u16 w;
-
BUG_ON(omap_dma_in_1510_mode());
- if (cpu_class_is_omap2()) {
- REVISIT_24XX();
- return;
- }
+ if (cpu_class_is_omap1()) {
+ u16 w;
- w = dma_read(CCR2(lch));
- w &= ~0x03;
+ w = dma_read(CCR2(lch));
+ w &= ~0x03;
- switch (mode) {
- case OMAP_DMA_CONSTANT_FILL:
- w |= 0x01;
- break;
- case OMAP_DMA_TRANSPARENT_COPY:
- w |= 0x02;
- break;
- case OMAP_DMA_COLOR_DIS:
- break;
- default:
- BUG();
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ w |= 0x01;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ w |= 0x02;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(w, CCR2(lch));
+
+ w = dma_read(LCH_CTRL(lch));
+ w &= ~0x0f;
+ /* Default is channel type 2D */
+ if (mode) {
+ dma_write((u16)color, COLOR_L(lch));
+ dma_write((u16)(color >> 16), COLOR_U(lch));
+ w |= 1; /* Channel type G */
+ }
+ dma_write(w, LCH_CTRL(lch));
}
- dma_write(w, CCR2(lch));
- w = dma_read(LCH_CTRL(lch));
- w &= ~0x0f;
- /* Default is channel type 2D */
- if (mode) {
- dma_write((u16)color, COLOR_L(lch));
- dma_write((u16)(color >> 16), COLOR_U(lch));
- w |= 1; /* Channel type G */
+ if (cpu_class_is_omap2()) {
+ u32 val;
+
+ val = dma_read(CCR(lch));
+ val &= ~((1 << 17) | (1 << 16));
+
+ switch (mode) {
+ case OMAP_DMA_CONSTANT_FILL:
+ val |= 1 << 16;
+ break;
+ case OMAP_DMA_TRANSPARENT_COPY:
+ val |= 1 << 17;
+ break;
+ case OMAP_DMA_COLOR_DIS:
+ break;
+ default:
+ BUG();
+ }
+ dma_write(val, CCR(lch));
+
+ color &= 0xffffff;
+ dma_write(color, COLOR(lch));
}
- dma_write(w, LCH_CTRL(lch));
}
EXPORT_SYMBOL(omap_set_dma_color_mode);
}
l = dma_read(CCR(lch));
l &= ~((1 << 6) | (1 << 26));
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
l |= ((read_prio & 0x1) << 6) | ((write_prio & 0x1) << 26);
else
l |= ((read_prio & 0x1) << 6);
* Failure: -EINVAL/-ENOMEM
*/
int omap_request_dma_chain(int dev_id, const char *dev_name,
- void (*callback) (int chain_id, u16 ch_status,
+ void (*callback) (int lch, u16 ch_status,
void *data),
int *chain_id, int no_of_chans, int chain_mode,
struct omap_dma_channel_params params)
#define omap1_dma_irq_handler NULL
#endif
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
static int omap2_dma_handle_ch(int ch)
{
} else if (cpu_is_omap34xx()) {
omap_dma_base = IO_ADDRESS(OMAP34XX_DMA4_BASE);
dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
+ } else if (cpu_is_omap44xx()) {
+ omap_dma_base = IO_ADDRESS(OMAP44XX_DMA4_BASE);
+ dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
} else {
pr_err("DMA init failed for unsupported omap\n");
return -ENODEV;
}
}
- if (cpu_is_omap2430() || cpu_is_omap34xx())
+ if (cpu_is_omap2430() || cpu_is_omap34xx() || cpu_is_omap44xx())
omap_dma_set_global_params(DMA_DEFAULT_ARB_RATE,
DMA_DEFAULT_FIFO_DEPTH, 0);
- if (cpu_class_is_omap2())
- setup_irq(INT_24XX_SDMA_IRQ0, &omap24xx_dma_irq);
+ if (cpu_class_is_omap2()) {
+ int irq;
+ if (cpu_is_omap44xx())
+ irq = INT_44XX_SDMA_IRQ0;
+ else
+ irq = INT_24XX_SDMA_IRQ0;
+ setup_irq(irq, &omap24xx_dma_irq);
+ }
/* FIXME: Update LCD DMA to work on 24xx */
if (cpu_class_is_omap1()) {
* OMAP2 support by Juha Yrjola
* API improvements and OMAP2 clock framework support by Timo Teras
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
struct omap_dm_timer {
unsigned long phys_base;
int irq;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *iclk, *fclk;
#endif
void __iomem *io_base;
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap1_dm_timers[] = {
{ .phys_base = 0xfffb1400, .irq = INT_1610_GPTIMER1 },
#define omap3_dm_timers NULL
#define omap3_dm_source_names NULL
#define omap3_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap2_dm_timers[] = {
{ .phys_base = 0x48028000, .irq = INT_24XX_GPTIMER1 },
NULL
};
-static struct clk **omap2_dm_source_clocks[3];
+static struct clk *omap2_dm_source_clocks[3];
static const int dm_timer_count = ARRAY_SIZE(omap2_dm_timers);
#elif defined(CONFIG_ARCH_OMAP3)
#define omap2_dm_timers NULL
#define omap2_dm_source_names NULL
#define omap2_dm_source_clocks NULL
+#define omap4_dm_timers NULL
+#define omap4_dm_source_names NULL
+#define omap4_dm_source_clocks NULL
static struct omap_dm_timer omap3_dm_timers[] = {
{ .phys_base = 0x48318000, .irq = INT_24XX_GPTIMER1 },
NULL
};
-static struct clk **omap3_dm_source_clocks[2];
+static struct clk *omap3_dm_source_clocks[2];
static const int dm_timer_count = ARRAY_SIZE(omap3_dm_timers);
+#elif defined(CONFIG_ARCH_OMAP4)
+
+#define omap_dm_clk_enable(x) clk_enable(x)
+#define omap_dm_clk_disable(x) clk_disable(x)
+#define omap1_dm_timers NULL
+#define omap2_dm_timers NULL
+#define omap2_dm_source_names NULL
+#define omap2_dm_source_clocks NULL
+#define omap3_dm_timers NULL
+#define omap3_dm_source_names NULL
+#define omap3_dm_source_clocks NULL
+
+static struct omap_dm_timer omap4_dm_timers[] = {
+ { .phys_base = 0x4a318000, .irq = INT_44XX_GPTIMER1 },
+ { .phys_base = 0x48032000, .irq = INT_44XX_GPTIMER2 },
+ { .phys_base = 0x48034000, .irq = INT_44XX_GPTIMER3 },
+ { .phys_base = 0x48036000, .irq = INT_44XX_GPTIMER4 },
+ { .phys_base = 0x40138000, .irq = INT_44XX_GPTIMER5 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER6 },
+ { .phys_base = 0x4013a000, .irq = INT_44XX_GPTIMER7 },
+ { .phys_base = 0x4013e000, .irq = INT_44XX_GPTIMER8 },
+ { .phys_base = 0x4803e000, .irq = INT_44XX_GPTIMER9 },
+ { .phys_base = 0x48086000, .irq = INT_44XX_GPTIMER10 },
+ { .phys_base = 0x48088000, .irq = INT_44XX_GPTIMER11 },
+ { .phys_base = 0x4a320000, .irq = INT_44XX_GPTIMER12 },
+};
+static const char *omap4_dm_source_names[] __initdata = {
+ "sys_ck",
+ "omap_32k_fck",
+ NULL
+};
+static struct clk *omap4_dm_source_clocks[2];
+static const int dm_timer_count = ARRAY_SIZE(omap4_dm_timers);
+
#else
#error OMAP architecture not supported!
#endif
static struct omap_dm_timer *dm_timers;
-static char **dm_source_names;
+static const char **dm_source_names;
static struct clk **dm_source_clocks;
static spinlock_t dm_timer_lock;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_modify_idlect_mask);
-#elif defined(CONFIG_ARCH_OMAP2) || defined (CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clk *omap_dm_timer_get_fclk(struct omap_dm_timer *timer)
{
dm_timers = omap1_dm_timers;
else if (cpu_is_omap24xx()) {
dm_timers = omap2_dm_timers;
- dm_source_names = (char **)omap2_dm_source_names;
- dm_source_clocks = (struct clk **)omap2_dm_source_clocks;
+ dm_source_names = omap2_dm_source_names;
+ dm_source_clocks = omap2_dm_source_clocks;
} else if (cpu_is_omap34xx()) {
dm_timers = omap3_dm_timers;
- dm_source_names = (char **)omap3_dm_source_names;
- dm_source_clocks = (struct clk **)omap3_dm_source_clocks;
+ dm_source_names = omap3_dm_source_names;
+ dm_source_clocks = omap3_dm_source_clocks;
+ } else if (cpu_is_omap44xx()) {
+ dm_timers = omap4_dm_timers;
+ dm_source_names = omap4_dm_source_names;
+ dm_source_clocks = omap4_dm_source_clocks;
}
if (cpu_class_is_omap2())
for (i = 0; i < dm_timer_count; i++) {
timer = &dm_timers[i];
timer->io_base = IO_ADDRESS(timer->phys_base);
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
if (cpu_class_is_omap2()) {
char clk_name[16];
sprintf(clk_name, "gpt%d_ick", i + 1);
* Copyright (C) 2003-2005 Nokia Corporation
* Written by Juha Yrjölä <juha.yrjola@nokia.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
#define OMAP34XX_GPIO5_BASE IO_ADDRESS(0x49056000)
#define OMAP34XX_GPIO6_BASE IO_ADDRESS(0x49058000)
+/*
+ * OMAP44XX specific GPIO registers
+ */
+#define OMAP44XX_GPIO1_BASE IO_ADDRESS(0x4a310000)
+#define OMAP44XX_GPIO2_BASE IO_ADDRESS(0x48055000)
+#define OMAP44XX_GPIO3_BASE IO_ADDRESS(0x48057000)
+#define OMAP44XX_GPIO4_BASE IO_ADDRESS(0x48059000)
+#define OMAP44XX_GPIO5_BASE IO_ADDRESS(0x4805B000)
+#define OMAP44XX_GPIO6_BASE IO_ADDRESS(0x4805D000)
+
#define OMAP_MPUIO_VBASE IO_ADDRESS(OMAP_MPUIO_BASE)
struct gpio_bank {
u16 irq;
u16 virtual_irq_start;
int method;
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
u32 suspend_wakeup;
u32 saved_wakeup;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
u32 non_wakeup_gpios;
u32 enabled_non_wakeup_gpios;
#endif
+#ifdef CONFIG_ARCH_OMAP4
+static struct gpio_bank gpio_bank_44xx[6] = {
+ { OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+ METHOD_GPIO_24XX },
+ { OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+ METHOD_GPIO_24XX },
+};
+
+#endif
+
static struct gpio_bank *gpio_bank;
static int gpio_bank_count;
}
if (cpu_is_omap24xx())
return &gpio_bank[gpio >> 5];
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return &gpio_bank[gpio >> 5];
BUG();
return NULL;
return gpio & 0x1f;
if (cpu_is_omap24xx())
return gpio & 0x1f;
- if (cpu_is_omap34xx())
+ if (cpu_is_omap34xx() || cpu_is_omap44xx())
return gpio & 0x1f;
return gpio & 0x0f;
}
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
- if (cpu_is_omap34xx() && gpio < 192)
+ if ((cpu_is_omap34xx() || cpu_is_omap44xx()) && gpio < 192)
return 0;
return -1;
}
reg += OMAP850_GPIO_DIR_CONTROL;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_OE;
break;
l &= ~(1 << gpio);
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETDATAOUT;
reg += OMAP850_GPIO_DATA_INPUT;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_DATAIN;
break;
else
goto done;
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
if (enable)
clk_enable(bank->dbck);
else
}
EXPORT_SYMBOL(omap_set_gpio_debounce_time);
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
int trigger)
{
goto bad;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
set_24xx_gpio_triggering(bank, gpio, trigger);
break;
reg += OMAP850_GPIO_INT_STATUS;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQSTATUS1;
break;
inv = 1;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
reg += OMAP24XX_GPIO_IRQENABLE1;
mask = 0xffffffff;
l |= gpio_mask;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (enable)
reg += OMAP24XX_GPIO_SETIRQENABLE1;
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
if (bank->non_wakeup_gpios & (1 << gpio)) {
printk(KERN_ERR "Unable to modify wakeup on "
__raw_writel(1 << offset, reg);
}
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
/* Disable wake-up during idle for dynamic tick */
void __iomem *reg = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
if (bank->method == METHOD_GPIO_850)
isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX)
isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1;
#endif
/*---------------------------------------------------------------------*/
static int initialized;
-#if !defined(CONFIG_ARCH_OMAP3)
+#if !(defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4))
static struct clk * gpio_ick;
#endif
static struct clk * gpio5_fck;
#endif
-#if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
#endif
}
#endif
-#if defined(CONFIG_ARCH_OMAP3)
- if (cpu_is_omap34xx()) {
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
for (i = 0; i < OMAP34XX_NR_GPIOS; i++) {
sprintf(clk_name, "gpio%d_ick", i + 1);
gpio_iclks[i] = clk_get(NULL, clk_name);
printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
(rev >> 4) & 0x0f, rev & 0x0f);
}
+#endif
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ int rev;
+
+ gpio_bank_count = OMAP34XX_NR_GPIOS;
+ gpio_bank = gpio_bank_44xx;
+ rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+ printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
+ (rev >> 4) & 0x0f, rev & 0x0f);
+ }
#endif
for (i = 0; i < gpio_bank_count; i++) {
int j, gpio_count = 16;
gpio_count = 32; /* 730 has 32-bit GPIOs */
}
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
if (bank->method == METHOD_GPIO_24XX) {
static const u32 non_wakeup_gpios[] = {
0xe203ffc0, 0x08700040
set_irq_chained_handler(bank->irq, gpio_irq_handler);
set_irq_data(bank->irq, bank);
- if (cpu_is_omap34xx()) {
+ if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
sprintf(clk_name, "gpio%d_dbck", i + 1);
bank->dbck = clk_get(NULL, clk_name);
if (IS_ERR(bank->dbck))
return 0;
}
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg)
{
int i;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN;
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA;
break;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
case METHOD_GPIO_24XX:
wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA;
wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA;
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
static int workaround_enabled;
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
bank->saved_risingdetect = l2;
l1 &= ~bank->enabled_non_wakeup_gpios;
l2 &= ~bank->enabled_non_wakeup_gpios;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT);
#endif
if (!(bank->enabled_non_wakeup_gpios))
continue;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
__raw_writel(bank->saved_fallingdetect,
bank->base + OMAP24XX_GPIO_FALLINGDETECT);
__raw_writel(bank->saved_risingdetect,
* state. If so, generate an IRQ by software. This is
* horribly racy, but it's the best we can do to work around
* this silicon bug. */
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN);
#endif
l ^= bank->saved_datain;
l &= bank->non_wakeup_gpios;
if (l) {
u32 old0, old1;
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
__raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0);
mpuio_init();
-#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
if (ret == 0) {
ret = sysdev_class_register(&omap_gpio_sysclass);
irqstat = irq_desc[irq].status;
#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \
- defined(CONFIG_ARCH_OMAP34XX)
+ defined(CONFIG_ARCH_OMAP34XX) || defined(CONFIG_ARCH_OMAP4)
if (is_in && ((bank->suspend_wakeup & mask)
|| irqstat & IRQ_TYPE_SENSE_MASK)) {
char *trigger = NULL;
*
* Copyright (C) 2007 Nokia Corporation.
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
void (*disable)(struct clk *);
};
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
struct clksel_rate {
u32 val;
u8 max_divider;
u32 max_tolerance;
u16 max_multiplier;
-# if defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
u8 modes;
void __iomem *autoidle_reg;
void __iomem *idlest_reg;
void (*init)(struct clk *);
__u8 enable_bit;
__s8 usecount;
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
u8 fixed_div;
void __iomem *clksel_reg;
u32 clksel_mask;
extern unsigned int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
-extern void clk_init_one(struct clk *clk);
+extern void clk_preinit(struct clk *clk);
extern int clk_register(struct clk *clk);
extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
extern void omap_map_common_io(void);
extern struct sys_timer omap_timer;
-extern void omap_serial_init(void);
-extern void omap_serial_enable_clocks(int enable);
#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
struct i2c_board_info const *info,
void omap2_set_globals_242x(void);
void omap2_set_globals_243x(void);
void omap2_set_globals_343x(void);
+void omap2_set_globals_443x(void);
/* These get called from omap2_set_globals_xxxx(), do not call these */
void omap2_set_globals_tap(struct omap_globals *);
/*
* arch/arm/plat-omap/include/mach/control.h
*
- * OMAP2/3 System Control Module definitions
+ * OMAP2/3/4 System Control Module definitions
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
* Copyright (C) 2007-2008 Nokia Corporation
*
* Written by Paul Walmsley
#define OMAP343X_CONTROL_PBIAS_LITE (OMAP2_CONTROL_GENERAL + 0x02b0)
#define OMAP343X_CONTROL_TEMP_SENSOR (OMAP2_CONTROL_GENERAL + 0x02b4)
+/* 34xx D2D idle-related pins, handled by PM core */
+#define OMAP3_PADCONF_SAD2D_MSTANDBY 0x250
+#define OMAP3_PADCONF_SAD2D_IDLEACK 0x254
+
/*
* REVISIT: This list of registers is not comprehensive - there are more
* that should be added.
#define OMAP2_PBIASLITEPWRDNZ0 (1 << 1)
#define OMAP2_PBIASLITEVMODE0 (1 << 0)
+/* CONTROL_IVA2_BOOTMOD bits */
+#define OMAP3_IVA2_BOOTMOD_SHIFT 0
+#define OMAP3_IVA2_BOOTMOD_MASK (0xf << 0)
+#define OMAP3_IVA2_BOOTMOD_IDLE (0x1 << 0)
+
+/* CONTROL_PADCONF_X bits */
+#define OMAP3_PADCONF_WAKEUPEVENT0 (1 << 15)
+#define OMAP3_PADCONF_WAKEUPENABLE0 (1 << 14)
+
#ifndef __ASSEMBLY__
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
extern void __iomem *omap_ctrl_base_get(void);
extern u8 omap_ctrl_readb(u16 offset);
extern u16 omap_ctrl_readw(u16 offset);
*
* Copyright (C) 2004, 2008 Nokia Corporation
*
+ * Copyright (C) 2009 Texas Instruments.
+ *
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
+ * Added OMAP4 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#define cpu_is_omap243x() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap343x() 0
+#define cpu_is_omap44xx() 0
+#define cpu_is_omap443x() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
# define cpu_is_omap3430() is_omap3430()
#endif
+# if defined(CONFIG_ARCH_OMAP4)
+# undef cpu_is_omap44xx
+# undef cpu_is_omap443x
+# define cpu_is_omap44xx() 1
+# define cpu_is_omap443x() 1
+# endif
+
/* Macros to detect if we have OMAP1 or OMAP2 */
#define cpu_class_is_omap1() (cpu_is_omap7xx() || cpu_is_omap15xx() || \
cpu_is_omap16xx())
-#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx())
+#define cpu_class_is_omap2() (cpu_is_omap24xx() || cpu_is_omap34xx() || \
+ cpu_is_omap44xx())
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
/* Various silicon revisions for omap2 */
#define OMAP242X_CLASS 0x24200024
#define OMAP3430_REV_ES3_0 0x34303034
#define OMAP3430_REV_ES3_1 0x34304034
+#define OMAP443X_CLASS 0x44300034
+
/*
* omap_chip bits
*
add \rx, \rx, #0x00004000 @ UART 3
#endif
-#elif CONFIG_ARCH_OMAP3
+#elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
moveq \rx, #0x48000000 @ physical base address
movne \rx, #0xd8000000 @ virtual base
orr \rx, \rx, #0x0006a000
/* Hardware registers for omap2 and omap3 */
#define OMAP24XX_DMA4_BASE (L4_24XX_BASE + 0x56000)
#define OMAP34XX_DMA4_BASE (L4_34XX_BASE + 0x56000)
+#define OMAP44XX_DMA4_BASE (L4_44XX_BASE + 0x56000)
#define OMAP_DMA4_REVISION 0x00
#define OMAP_DMA4_GCR 0x78
#define OMAP_DMA4_CSSA_U(n) 0
#define OMAP_DMA4_CDSA_L(n) 0
#define OMAP_DMA4_CDSA_U(n) 0
+#define OMAP1_DMA_COLOR(n) 0
/*----------------------------------------------------------------------------*/
/* Chaining APIs */
#ifndef CONFIG_ARCH_OMAP1
extern int omap_request_dma_chain(int dev_id, const char *dev_name,
- void (*callback) (int chain_id, u16 ch_status,
+ void (*callback) (int lch, u16 ch_status,
void *data),
int *chain_id, int no_of_chans,
int chain_mode,
*
* Low-level IRQ helper macros for OMAP-based platforms
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
#include <mach/hardware.h>
#include <mach/io.h>
#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
#if defined(CONFIG_ARCH_OMAP1)
.endm
#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
+ defined(CONFIG_ARCH_OMAP4)
-#if defined(CONFIG_ARCH_OMAP24XX)
#include <mach/omap24xx.h>
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
#include <mach/omap34xx.h>
-#endif
+/* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
+#if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
+#elif defined(CONFIG_ARCH_OMAP34XX)
+#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
+#endif
+#if defined(CONFIG_ARCH_OMAP4)
+#include <mach/omap44xx.h>
+#endif
#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* Active interrupt offset */
#define ACTIVEIRQ_MASK 0x7f /* Active interrupt bits */
.macro arch_ret_to_user, tmp1, tmp2
.endm
+#ifndef CONFIG_ARCH_OMAP4
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \base, =OMAP2_VA_IC_BASE
ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
.endm
+#else
+ /*
+ * The interrupt numbering scheme is defined in the
+ * interrupt controller spec. To wit:
+ *
+ * Interrupts 0-15 are IPI
+ * 16-28 are reserved
+ * 29-31 are local. We allow 30 to be used for the watchdog.
+ * 32-1020 are global
+ * 1021-1022 are reserved
+ * 1023 is "spurious" (no interrupt)
+ *
+ * For now, we ignore all local interrupts so only return an
+ * interrupt if it's between 30 and 1020. The test_for_ipi
+ * routine below will pick up on IPIs.
+ * A simple read from the controller will tell us the number
+ * of the highest priority enabled interrupt.
+ * We then just need to check whether it is in the
+ * valid range for an IRQ (30-1020 inclusive).
+ */
+ .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
+ ldr \base, =OMAP44XX_VA_GIC_CPU_BASE
+ ldr \irqstat, [\base, #GIC_CPU_INTACK]
+
+ ldr \tmp, =1021
+
+ bic \irqnr, \irqstat, #0x1c00
+
+ cmp \irqnr, #29
+ cmpcc \irqnr, \irqnr
+ cmpne \irqnr, \tmp
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* We assume that irqstat (the raw value of the IRQ acknowledge
+ * register) is preserved from the macro above.
+ * If there is an IPI, we immediately signal end of interrupt
+ * on the controller, since this requires the original irqstat
+ * value which we won't easily be able to recreate later.
+ */
+
+ .macro test_for_ipi, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ cmp \irqnr, #16
+ it cc
+ strcc \irqstat, [\base, #GIC_CPU_EOI]
+ it cs
+ cmpcs \irqnr, \irqnr
+ .endm
+
+ /* As above, this assumes that irqstat and base are preserved */
+
+ .macro test_for_ltirq, irqnr, irqstat, base, tmp
+ bic \irqnr, \irqstat, #0x1c00
+ mov \tmp, #0
+ cmp \irqnr, #29
+ itt eq
+ moveq \tmp, #1
+ streq \irqstat, [\base, #GIC_CPU_EOI]
+ cmp \tmp, #0
+ .endm
+#endif
.macro irq_prio_table
.endm
--- /dev/null
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96 (1 << 4)
+#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+ int cs;
+ int gpio_irq;
+ int gpio_pwrdwn;
+ int gpio_reset;
+ int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */
+ u32 flags;
+ int (*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+ defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
#include "omap16xx.h"
#include "omap24xx.h"
#include "omap34xx.h"
+#include "omap44xx.h"
#endif /* __ASM_ARCH_OMAP_HARDWARE_H */
#define _HWA742_H
struct hwa742_platform_data {
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
- unsigned long (*get_clock_rate)(struct device *dev);
-
unsigned te_connected:1;
};
* Copied from arch/arm/mach-sa1100/include/mach/io.h
* Copyright (C) 1997-1999 Russell King
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
#define DSP_MMU_34XX_VIRT 0xe2000000
#define DSP_MMU_34XX_SIZE SZ_4K
+
+#elif defined(CONFIG_ARCH_OMAP4)
+/* We map both L3 and L4 on OMAP4 */
+#define L3_44XX_PHYS L3_44XX_BASE
+#define L3_44XX_VIRT 0xd4000000
+#define L3_44XX_SIZE SZ_1M
+
+#define L4_44XX_PHYS L4_44XX_BASE
+#define L4_44XX_VIRT 0xda000000
+#define L4_44XX_SIZE SZ_4M
+
+
+#define L4_WK_44XX_PHYS L4_WK_44XX_BASE
+#define L4_WK_44XX_VIRT 0xda300000
+#define L4_WK_44XX_SIZE SZ_1M
+
+#define L4_PER_44XX_PHYS L4_PER_44XX_BASE
+#define L4_PER_44XX_VIRT 0xd8000000
+#define L4_PER_44XX_SIZE SZ_4M
+
+#define L4_EMU_44XX_PHYS L4_EMU_44XX_BASE
+#define L4_EMU_44XX_VIRT 0xe4000000
+#define L4_EMU_44XX_SIZE SZ_64M
+
+#define OMAP44XX_GPMC_PHYS OMAP44XX_GPMC_BASE
+#define OMAP44XX_GPMC_VIRT 0xe0000000
+#define OMAP44XX_GPMC_SIZE SZ_1M
+
+
+#define IO_OFFSET 0x90000000
+#define __IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define __OMAP2_IO_ADDRESS(pa) ((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va) ((va) - IO_OFFSET)/* Works for L3 and L4 */
+
#endif
#define IO_ADDRESS(pa) IOMEM(__IO_ADDRESS(pa))
--- /dev/null
+/*
+ * omap iommu: main structures
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU_H
+#define __MACH_IOMMU_H
+
+struct iotlb_entry {
+ u32 da;
+ u32 pa;
+ u32 pgsz, prsvd, valid;
+ union {
+ u16 ap;
+ struct {
+ u32 endian, elsz, mixed;
+ };
+ };
+};
+
+struct iommu {
+ const char *name;
+ struct module *owner;
+ struct clk *clk;
+ void __iomem *regbase;
+ struct device *dev;
+
+ unsigned int refcount;
+ struct mutex iommu_lock; /* global for this whole object */
+
+ /*
+ * We don't change iopgd for a situation like pgd for a task,
+ * but share it globally for each iommu.
+ */
+ u32 *iopgd;
+ spinlock_t page_table_lock; /* protect iopgd */
+
+ int nr_tlb_entries;
+
+ struct list_head mmap;
+ struct mutex mmap_lock; /* protect mmap */
+
+ int (*isr)(struct iommu *obj);
+
+ void *ctx; /* iommu context: registres saved area */
+};
+
+struct cr_regs {
+ union {
+ struct {
+ u16 cam_l;
+ u16 cam_h;
+ };
+ u32 cam;
+ };
+ union {
+ struct {
+ u16 ram_l;
+ u16 ram_h;
+ };
+ u32 ram;
+ };
+};
+
+struct iotlb_lock {
+ short base;
+ short vict;
+};
+
+/* architecture specific functions */
+struct iommu_functions {
+ unsigned long version;
+
+ int (*enable)(struct iommu *obj);
+ void (*disable)(struct iommu *obj);
+ u32 (*fault_isr)(struct iommu *obj, u32 *ra);
+
+ void (*tlb_read_cr)(struct iommu *obj, struct cr_regs *cr);
+ void (*tlb_load_cr)(struct iommu *obj, struct cr_regs *cr);
+
+ struct cr_regs *(*alloc_cr)(struct iommu *obj, struct iotlb_entry *e);
+ int (*cr_valid)(struct cr_regs *cr);
+ u32 (*cr_to_virt)(struct cr_regs *cr);
+ void (*cr_to_e)(struct cr_regs *cr, struct iotlb_entry *e);
+ ssize_t (*dump_cr)(struct iommu *obj, struct cr_regs *cr, char *buf);
+
+ u32 (*get_pte_attr)(struct iotlb_entry *e);
+
+ void (*save_ctx)(struct iommu *obj);
+ void (*restore_ctx)(struct iommu *obj);
+ ssize_t (*dump_ctx)(struct iommu *obj, char *buf);
+};
+
+struct iommu_platform_data {
+ const char *name;
+ const char *clk_name;
+ const int nr_tlb_entries;
+};
+
+#if defined(CONFIG_ARCH_OMAP1)
+#error "iommu for this processor not implemented yet"
+#else
+#include <mach/iommu2.h>
+#endif
+
+/*
+ * utilities for super page(16MB, 1MB, 64KB and 4KB)
+ */
+
+#define iopgsz_max(bytes) \
+ (((bytes) >= SZ_16M) ? SZ_16M : \
+ ((bytes) >= SZ_1M) ? SZ_1M : \
+ ((bytes) >= SZ_64K) ? SZ_64K : \
+ ((bytes) >= SZ_4K) ? SZ_4K : 0)
+
+#define bytes_to_iopgsz(bytes) \
+ (((bytes) == SZ_16M) ? MMU_CAM_PGSZ_16M : \
+ ((bytes) == SZ_1M) ? MMU_CAM_PGSZ_1M : \
+ ((bytes) == SZ_64K) ? MMU_CAM_PGSZ_64K : \
+ ((bytes) == SZ_4K) ? MMU_CAM_PGSZ_4K : -1)
+
+#define iopgsz_to_bytes(iopgsz) \
+ (((iopgsz) == MMU_CAM_PGSZ_16M) ? SZ_16M : \
+ ((iopgsz) == MMU_CAM_PGSZ_1M) ? SZ_1M : \
+ ((iopgsz) == MMU_CAM_PGSZ_64K) ? SZ_64K : \
+ ((iopgsz) == MMU_CAM_PGSZ_4K) ? SZ_4K : 0)
+
+#define iopgsz_ok(bytes) (bytes_to_iopgsz(bytes) >= 0)
+
+/*
+ * global functions
+ */
+extern u32 iommu_arch_version(void);
+
+extern void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e);
+extern u32 iotlb_cr_to_virt(struct cr_regs *cr);
+
+extern int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e);
+extern void flush_iotlb_page(struct iommu *obj, u32 da);
+extern void flush_iotlb_range(struct iommu *obj, u32 start, u32 end);
+extern void flush_iotlb_all(struct iommu *obj);
+
+extern int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e);
+extern size_t iopgtable_clear_entry(struct iommu *obj, u32 iova);
+
+extern struct iommu *iommu_get(const char *name);
+extern void iommu_put(struct iommu *obj);
+
+extern void iommu_save_ctx(struct iommu *obj);
+extern void iommu_restore_ctx(struct iommu *obj);
+
+extern int install_iommu_arch(const struct iommu_functions *ops);
+extern void uninstall_iommu_arch(const struct iommu_functions *ops);
+
+extern int foreach_iommu_device(void *data,
+ int (*fn)(struct device *, void *));
+
+extern ssize_t iommu_dump_ctx(struct iommu *obj, char *buf);
+extern size_t dump_tlb_entries(struct iommu *obj, char *buf);
+
+#endif /* __MACH_IOMMU_H */
--- /dev/null
+/*
+ * omap iommu: omap2 architecture specific definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_IOMMU2_H
+#define __MACH_IOMMU2_H
+
+#include <linux/io.h>
+
+/*
+ * MMU Register offsets
+ */
+#define MMU_REVISION 0x00
+#define MMU_SYSCONFIG 0x10
+#define MMU_SYSSTATUS 0x14
+#define MMU_IRQSTATUS 0x18
+#define MMU_IRQENABLE 0x1c
+#define MMU_WALKING_ST 0x40
+#define MMU_CNTL 0x44
+#define MMU_FAULT_AD 0x48
+#define MMU_TTB 0x4c
+#define MMU_LOCK 0x50
+#define MMU_LD_TLB 0x54
+#define MMU_CAM 0x58
+#define MMU_RAM 0x5c
+#define MMU_GFLUSH 0x60
+#define MMU_FLUSH_ENTRY 0x64
+#define MMU_READ_CAM 0x68
+#define MMU_READ_RAM 0x6c
+#define MMU_EMU_FAULT_AD 0x70
+
+#define MMU_REG_SIZE 256
+
+/*
+ * MMU Register bit definitions
+ */
+#define MMU_LOCK_BASE_SHIFT 10
+#define MMU_LOCK_BASE_MASK (0x1f << MMU_LOCK_BASE_SHIFT)
+#define MMU_LOCK_BASE(x) \
+ ((x & MMU_LOCK_BASE_MASK) >> MMU_LOCK_BASE_SHIFT)
+
+#define MMU_LOCK_VICT_SHIFT 4
+#define MMU_LOCK_VICT_MASK (0x1f << MMU_LOCK_VICT_SHIFT)
+#define MMU_LOCK_VICT(x) \
+ ((x & MMU_LOCK_VICT_MASK) >> MMU_LOCK_VICT_SHIFT)
+
+#define MMU_CAM_VATAG_SHIFT 12
+#define MMU_CAM_VATAG_MASK \
+ ((~0UL >> MMU_CAM_VATAG_SHIFT) << MMU_CAM_VATAG_SHIFT)
+#define MMU_CAM_P (1 << 3)
+#define MMU_CAM_V (1 << 2)
+#define MMU_CAM_PGSZ_MASK 3
+#define MMU_CAM_PGSZ_1M (0 << 0)
+#define MMU_CAM_PGSZ_64K (1 << 0)
+#define MMU_CAM_PGSZ_4K (2 << 0)
+#define MMU_CAM_PGSZ_16M (3 << 0)
+
+#define MMU_RAM_PADDR_SHIFT 12
+#define MMU_RAM_PADDR_MASK \
+ ((~0UL >> MMU_RAM_PADDR_SHIFT) << MMU_RAM_PADDR_SHIFT)
+#define MMU_RAM_ENDIAN_SHIFT 9
+#define MMU_RAM_ENDIAN_MASK (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_BIG (1 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ENDIAN_LITTLE (0 << MMU_RAM_ENDIAN_SHIFT)
+#define MMU_RAM_ELSZ_SHIFT 7
+#define MMU_RAM_ELSZ_MASK (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_8 (0 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_16 (1 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_32 (2 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_ELSZ_NONE (3 << MMU_RAM_ELSZ_SHIFT)
+#define MMU_RAM_MIXED_SHIFT 6
+#define MMU_RAM_MIXED_MASK (1 << MMU_RAM_MIXED_SHIFT)
+#define MMU_RAM_MIXED MMU_RAM_MIXED_MASK
+
+/*
+ * register accessors
+ */
+static inline u32 iommu_read_reg(struct iommu *obj, size_t offs)
+{
+ return __raw_readl(obj->regbase + offs);
+}
+
+static inline void iommu_write_reg(struct iommu *obj, u32 val, size_t offs)
+{
+ __raw_writel(val, obj->regbase + offs);
+}
+
+#endif /* __MACH_IOMMU2_H */
--- /dev/null
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __IOMMU_MMAP_H
+#define __IOMMU_MMAP_H
+
+struct iovm_struct {
+ struct iommu *iommu; /* iommu object which this belongs to */
+ u32 da_start; /* area definition */
+ u32 da_end;
+ u32 flags; /* IOVMF_: see below */
+ struct list_head list; /* linked in ascending order */
+ const struct sg_table *sgt; /* keep 'page' <-> 'da' mapping */
+ void *va; /* mpu side mapped address */
+};
+
+/*
+ * IOVMF_FLAGS: attribute for iommu virtual memory area(iovma)
+ *
+ * lower 16 bit is used for h/w and upper 16 bit is for s/w.
+ */
+#define IOVMF_SW_SHIFT 16
+#define IOVMF_HW_SIZE (1 << IOVMF_SW_SHIFT)
+#define IOVMF_HW_MASK (IOVMF_HW_SIZE - 1)
+#define IOVMF_SW_MASK (~IOVMF_HW_MASK)UL
+
+/*
+ * iovma: h/w flags derived from cam and ram attribute
+ */
+#define IOVMF_CAM_MASK (~((1 << 10) - 1))
+#define IOVMF_RAM_MASK (~IOVMF_CAM_MASK)
+
+#define IOVMF_PGSZ_MASK (3 << 0)
+#define IOVMF_PGSZ_1M MMU_CAM_PGSZ_1M
+#define IOVMF_PGSZ_64K MMU_CAM_PGSZ_64K
+#define IOVMF_PGSZ_4K MMU_CAM_PGSZ_4K
+#define IOVMF_PGSZ_16M MMU_CAM_PGSZ_16M
+
+#define IOVMF_ENDIAN_MASK (1 << 9)
+#define IOVMF_ENDIAN_BIG MMU_RAM_ENDIAN_BIG
+#define IOVMF_ENDIAN_LITTLE MMU_RAM_ENDIAN_LITTLE
+
+#define IOVMF_ELSZ_MASK (3 << 7)
+#define IOVMF_ELSZ_8 MMU_RAM_ELSZ_8
+#define IOVMF_ELSZ_16 MMU_RAM_ELSZ_16
+#define IOVMF_ELSZ_32 MMU_RAM_ELSZ_32
+#define IOVMF_ELSZ_NONE MMU_RAM_ELSZ_NONE
+
+#define IOVMF_MIXED_MASK (1 << 6)
+#define IOVMF_MIXED MMU_RAM_MIXED
+
+/*
+ * iovma: s/w flags, used for mapping and umapping internally.
+ */
+#define IOVMF_MMIO (1 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC (2 << IOVMF_SW_SHIFT)
+#define IOVMF_ALLOC_MASK (3 << IOVMF_SW_SHIFT)
+
+/* "superpages" is supported just with physically linear pages */
+#define IOVMF_DISCONT (1 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR (2 << (2 + IOVMF_SW_SHIFT))
+#define IOVMF_LINEAR_MASK (3 << (2 + IOVMF_SW_SHIFT))
+
+#define IOVMF_DA_FIXED (1 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_ANON (2 << (4 + IOVMF_SW_SHIFT))
+#define IOVMF_DA_MASK (3 << (4 + IOVMF_SW_SHIFT))
+
+
+extern struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da);
+extern u32 iommu_vmap(struct iommu *obj, u32 da,
+ const struct sg_table *sgt, u32 flags);
+extern struct sg_table *iommu_vunmap(struct iommu *obj, u32 da);
+extern u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes,
+ u32 flags);
+extern void iommu_vfree(struct iommu *obj, const u32 da);
+extern u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+ u32 flags);
+extern void iommu_kunmap(struct iommu *obj, u32 da);
+extern u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes,
+ u32 flags);
+extern void iommu_kfree(struct iommu *obj, u32 da);
+
+extern void *da_to_va(struct iommu *obj, u32 da);
+
+#endif /* __IOMMU_MMAP_H */
* Copyright (C) Greg Lonnon 2001
* Updated for OMAP-1610 by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
#define INT_34XX_BENCH_MPU_EMUL 3
+
+#define IRQ_GIC_START 32
+#define INT_44XX_LOCALTIMER_IRQ 29
+#define INT_44XX_LOCALWDT_IRQ 30
+
+#define INT_44XX_BENCH_MPU_EMUL (3 + IRQ_GIC_START)
+#define INT_44XX_SSM_ABORT_IRQ (6 + IRQ_GIC_START)
+#define INT_44XX_SYS_NIRQ (7 + IRQ_GIC_START)
+#define INT_44XX_D2D_FW_IRQ (8 + IRQ_GIC_START)
+#define INT_44XX_PRCM_MPU_IRQ (11 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ0 (12 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ1 (13 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ2 (14 + IRQ_GIC_START)
+#define INT_44XX_SDMA_IRQ3 (15 + IRQ_GIC_START)
+#define INT_44XX_ISS_IRQ (24 + IRQ_GIC_START)
+#define INT_44XX_DSS_IRQ (25 + IRQ_GIC_START)
+#define INT_44XX_MAIL_U0_MPU (26 + IRQ_GIC_START)
+#define INT_44XX_DSP_MMU (28 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER1 (37 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER2 (38 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER3 (39 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER4 (40 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER5 (41 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER6 (42 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER7 (43 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER8 (44 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER9 (45 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER10 (46 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER11 (47 + IRQ_GIC_START)
+#define INT_44XX_GPTIMER12 (95 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD5 (51 + IRQ_GIC_START)
+#define INT_44XX_I2C1_IRQ (56 + IRQ_GIC_START)
+#define INT_44XX_I2C2_IRQ (57 + IRQ_GIC_START)
+#define INT_44XX_HDQ_IRQ (58 + IRQ_GIC_START)
+#define INT_44XX_SPI1_IRQ (65 + IRQ_GIC_START)
+#define INT_44XX_SPI2_IRQ (66 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_IRQ0 (67 + IRQ_GIC_START)
+#define INT_44XX_HSI_2_IRQ1 (68 + IRQ_GIC_START)
+#define INT_44XX_HSI_1_DMAIRQ (71 + IRQ_GIC_START)
+#define INT_44XX_UART1_IRQ (72 + IRQ_GIC_START)
+#define INT_44XX_UART2_IRQ (73 + IRQ_GIC_START)
+#define INT_44XX_UART3_IRQ (74 + IRQ_GIC_START)
+#define INT_44XX_UART4_IRQ (70 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_NISO (76 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_ISO (77 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HGEN (78 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_HSOF (79 + IRQ_GIC_START)
+#define INT_44XX_USB_IRQ_OTG (80 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_TX (81 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ_RX (82 + IRQ_GIC_START)
+#define INT_44XX_MMC_IRQ (83 + IRQ_GIC_START)
+#define INT_44XX_MMC2_IRQ (86 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_TX (89 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ_RX (90 + IRQ_GIC_START)
+#define INT_44XX_SPI3_IRQ (91 + IRQ_GIC_START)
+#define INT_44XX_SPI5_IRQ (69 + IRQ_GIC_START)
+
+#define INT_44XX_MCBSP5_IRQ (16 + IRQ_GIC_START)
+#define INT_44xX_MCBSP1_IRQ (17 + IRQ_GIC_START)
+#define INT_44XX_MCBSP2_IRQ (22 + IRQ_GIC_START)
+#define INT_44XX_MCBSP3_IRQ (23 + IRQ_GIC_START)
+#define INT_44XX_MCBSP4_IRQ (27 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_MC (92 + IRQ_GIC_START)
+#define INT_44XX_HS_USB_DMA (93 + IRQ_GIC_START)
+
+#define INT_44XX_GPIO_BANK1 (29 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK2 (30 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK3 (31 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK4 (32 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK5 (33 + IRQ_GIC_START)
+#define INT_44XX_GPIO_BANK6 (34 + IRQ_GIC_START)
+#define INT_44XX_USIM_IRQ (35 + IRQ_GIC_START)
+#define INT_44XX_WDT3_IRQ (36 + IRQ_GIC_START)
+#define INT_44XX_SPI4_IRQ (48 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD52_IRQ (49 + IRQ_GIC_START)
+#define INT_44XX_FPKA_READY_IRQ (50 + IRQ_GIC_START)
+#define INT_44XX_SHA1MD51_IRQ (51 + IRQ_GIC_START)
+#define INT_44XX_RNG_IRQ (52 + IRQ_GIC_START)
+#define INT_44XX_I2C3_IRQ (61 + IRQ_GIC_START)
+#define INT_44XX_FPKA_ERROR_IRQ (64 + IRQ_GIC_START)
+#define INT_44XX_PBIAS_IRQ (75 + IRQ_GIC_START)
+#define INT_44XX_OHCI_IRQ (76 + IRQ_GIC_START)
+#define INT_44XX_EHCI_IRQ (77 + IRQ_GIC_START)
+#define INT_44XX_TLL_IRQ (78 + IRQ_GIC_START)
+#define INT_44XX_PARTHASH_IRQ (79 + IRQ_GIC_START)
+#define INT_44XX_MMC3_IRQ (94 + IRQ_GIC_START)
+
+
/* Max. 128 level 2 IRQs (OMAP1610), 192 GPIOs (OMAP730/850) and
* 16 MPUIO lines */
#define OMAP_MAX_GPIO_LINES 192
#ifndef __ASSEMBLY__
extern void omap_init_irq(void);
+extern int omap_irq_pending(void);
#endif
#include <mach/hardware.h>
#define GROUP_3 (3 << 16)
#define GROUP_MASK GROUP_3
+#define KEY_PERSISTENT 0x00800000
+#define KEYNUM_MASK 0x00EFFFFF
#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+ KEY_PERSISTENT)
#endif
*/
#if defined(CONFIG_ARCH_OMAP1)
#define PHYS_OFFSET UL(0x10000000)
-#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+#elif defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+ defined(CONFIG_ARCH_OMAP4)
#define PHYS_OFFSET UL(0x80000000)
#endif
#define OMAP24XX_SEC_AES_BASE (OMAP24XX_SEC_BASE + 0x6000)
#define OMAP24XX_SEC_PKA_BASE (OMAP24XX_SEC_BASE + 0x8000)
-#if defined(CONFIG_ARCH_OMAP2420)
-
-#define OMAP2_32KSYNCT_BASE OMAP2420_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2420_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2420_CM_BASE
-#define OMAP2_PRM_BASE OMAP2420_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#elif defined(CONFIG_ARCH_OMAP2430)
-
-#define OMAP2_32KSYNCT_BASE OMAP2430_32KSYNCT_BASE
-#define OMAP2_PRCM_BASE OMAP2430_PRCM_BASE
-#define OMAP2_CM_BASE OMAP2430_CM_BASE
-#define OMAP2_PRM_BASE OMAP2430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP24XX_IC_BASE)
-
-#endif
-
#endif /* __ASM_ARCH_OMAP24XX_H */
#define L4_34XX_BASE 0x48000000
#define L4_WK_34XX_BASE 0x48300000
-#define L4_WK_OMAP_BASE L4_WK_34XX_BASE
#define L4_PER_34XX_BASE 0x49000000
-#define L4_PER_OMAP_BASE L4_PER_34XX_BASE
#define L4_EMU_34XX_BASE 0x54000000
-#define L4_EMU_BASE L4_EMU_34XX_BASE
#define L3_34XX_BASE 0x68000000
-#define L3_OMAP_BASE L3_34XX_BASE
#define OMAP3430_32KSYNCT_BASE 0x48320000
#define OMAP3430_CM_BASE 0x48004800
#define OMAP34XX_MAILBOX_BASE (L4_34XX_BASE + 0x94000)
-#if defined(CONFIG_ARCH_OMAP3430)
-
-#define OMAP2_32KSYNCT_BASE OMAP3430_32KSYNCT_BASE
-#define OMAP2_CM_BASE OMAP3430_CM_BASE
-#define OMAP2_PRM_BASE OMAP3430_PRM_BASE
-#define OMAP2_VA_IC_BASE IO_ADDRESS(OMAP34XX_IC_BASE)
-
-#endif
-
#define OMAP34XX_DSP_BASE 0x58000000
#define OMAP34XX_DSP_MEM_BASE (OMAP34XX_DSP_BASE + 0x0)
#define OMAP34XX_DSP_IPI_BASE (OMAP34XX_DSP_BASE + 0x1000000)
--- /dev/null
+/*:
+ * Address mappings and base address for OMAP4 interconnects
+ * and peripherals.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * Author: Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_OMAP44XX_H
+#define __ASM_ARCH_OMAP44XX_H
+
+/*
+ * Please place only base defines here and put the rest in device
+ * specific headers.
+ */
+#define L4_44XX_BASE 0x4a000000
+#define L4_WK_44XX_BASE 0x4a300000
+#define L4_PER_44XX_BASE 0x48000000
+#define L4_EMU_44XX_BASE 0x54000000
+#define L3_44XX_BASE 0x44000000
+#define OMAP4430_32KSYNCT_BASE 0x4a304000
+#define OMAP4430_CM_BASE 0x4a004000
+#define OMAP4430_PRM_BASE 0x48306000
+#define OMAP44XX_GPMC_BASE 0x50000000
+#define OMAP443X_SCM_BASE 0x4a002000
+#define OMAP443X_CTRL_BASE OMAP443X_SCM_BASE
+#define OMAP44XX_IC_BASE 0x48200000
+#define OMAP44XX_IVA_INTC_BASE 0x40000000
+#define IRQ_SIR_IRQ 0x0040
+#define OMAP44XX_GIC_DIST_BASE 0x48241000
+#define OMAP44XX_GIC_CPU_BASE 0x48240100
+#define OMAP44XX_VA_GIC_CPU_BASE IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+#define OMAP44XX_SCU_BASE 0x48240000
+#define OMAP44XX_VA_SCU_BASE IO_ADDRESS(OMAP44XX_SCU_BASE)
+#define OMAP44XX_LOCAL_TWD_BASE 0x48240600
+#define OMAP44XX_VA_LOCAL_TWD_BASE IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
+#define OMAP44XX_LOCAL_TWD_SIZE 0x00000100
+#define OMAP44XX_WKUPGEN_BASE 0x48281000
+#define OMAP44XX_VA_WKUPGEN_BASE IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#endif /* __ASM_ARCH_OMAP44XX_H */
+
* published by the Free Software Foundation.
*/
+#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#define ONENAND_SYNC_READ (1 << 0)
+#define ONENAND_SYNC_READWRITE (1 << 1)
+
struct omap_onenand_platform_data {
int cs;
int gpio_irq;
int nr_parts;
int (*onenand_setup)(void __iomem *, int freq);
int dma_channel;
+ u8 flags;
};
-int omap2_onenand_rephase(void);
-
#define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+ defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
/*
- * arch/arm/plat-omap/include/mach/serial.h
+ * arch/arm/plat-omap/include/mach/serial.h
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Addded OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
#define OMAP_UART1_BASE 0xfffb0000
#define OMAP_UART2_BASE 0xfffb0800
#define OMAP_UART3_BASE 0xfffb9800
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP2)
/* OMAP2 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 3
#elif defined(CONFIG_ARCH_OMAP3)
/* OMAP3 serial ports */
#define OMAP_UART1_BASE 0x4806a000
#define OMAP_UART2_BASE 0x4806c000
#define OMAP_UART3_BASE 0x49020000
+#define OMAP_MAX_NR_PORTS 3
+#elif defined(CONFIG_ARCH_OMAP4)
+/* OMAP4 serial ports */
+#define OMAP_UART1_BASE 0x4806a000
+#define OMAP_UART2_BASE 0x4806c000
+#define OMAP_UART3_BASE 0x48020000
+#define OMAP_UART4_BASE 0x4806e000
+#define OMAP_MAX_NR_PORTS 4
#endif
-#define OMAP_MAX_NR_PORTS 3
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
#define OMAP24XX_BASE_BAUD (48000000/16)
__ret; \
})
+#ifndef __ASSEMBLER__
+extern void omap_serial_init(void);
+extern int omap_uart_can_sleep(void);
+extern void omap_uart_check_wakeup(void);
+extern void omap_uart_prepare_suspend(void);
+extern void omap_uart_prepare_idle(int num);
+extern void omap_uart_resume_idle(int num);
+#endif
+
#endif
--- /dev/null
+/*
+ * OMAP4 machine specific smp.h
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Author:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Interface functions needed for the SMP. This file is based on arm
+ * realview smp platform.
+ * Copyright (c) 2003 ARM Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef OMAP_ARCH_SMP_H
+#define OMAP_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/*
+ * set_event() is used to wake up secondary core from wfe using sev. ROM
+ * code puts the second core into wfe(standby).
+ *
+ */
+#define set_event() __asm__ __volatile__ ("sev" : : : "memory")
+
+/* Needed for secondary core boot */
+extern void omap_secondary_startup(void);
+
+/*
+ * We use Soft IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+ gic_raise_softirq(mask, 1);
+}
+
+/*
+ * Read MPIDR: Multiprocessor affinity register
+ */
+#define hard_smp_processor_id() \
+ ({ \
+ unsigned int cpunum; \
+ __asm__("mrc p15, 0, %0, c0, c0, 5" \
+ : "=r" (cpunum)); \
+ cpunum &= 0x0F; \
+ })
+
+#endif
extern u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2);
+ u32 sdrc_actim_ctrlb, u32 m2,
+ u32 unlock_dll);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern u32 omap3_sram_configure_core_dpll(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2);
+ u32 sdrc_actim_ctrlb, u32 m2,
+ u32 unlock_dll);
extern unsigned long omap3_sram_configure_core_dpll_sz;
#endif
#define UDC_BASE OMAP2_UDC_BASE
#define OMAP_OHCI_BASE OMAP2_OHCI_BASE
-#ifdef CONFIG_USB_MUSB_SOC
extern void usb_musb_init(void);
-#else
-static inline void usb_musb_init(void)
-{
-}
-#endif
#endif
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END (PAGE_OFFSET + 0x18000000)
+/*
+ * Common io.c file
+ * This file is created by Russell King <rmk+kernel@arm.linux.org.uk>
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
#include <linux/module.h>
#include <linux/io.h>
#include <linux/mm.h>
#include <mach/omap16xx.h>
#include <mach/omap24xx.h>
#include <mach/omap34xx.h>
+#include <mach/omap44xx.h>
#define BETWEEN(p,st,sz) ((p) >= (st) && (p) < ((st) + (sz)))
#define XLATE(p,pst,vst) ((void __iomem *)((p) - (pst) + (vst)))
return XLATE(p, L4_EMU_34XX_PHYS, L4_EMU_34XX_VIRT);
}
#endif
-
+#ifdef CONFIG_ARCH_OMAP4
+ if (cpu_is_omap44xx()) {
+ if (BETWEEN(p, L3_44XX_PHYS, L3_44XX_SIZE))
+ return XLATE(p, L3_44XX_PHYS, L3_44XX_VIRT);
+ if (BETWEEN(p, L4_44XX_PHYS, L4_44XX_SIZE))
+ return XLATE(p, L4_44XX_PHYS, L4_44XX_VIRT);
+ if (BETWEEN(p, L4_WK_44XX_PHYS, L4_WK_44XX_SIZE))
+ return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
+ if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
+ return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+ if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
+ return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
+ if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
+ return XLATE(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_VIRT);
+ }
+#endif
return __arm_ioremap(p, size, type);
}
EXPORT_SYMBOL(omap_ioremap);
--- /dev/null
+/*
+ * omap iommu: tlb and pagetable primitives
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>,
+ * Paul Mundt and Toshihiro Kobayashi
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <asm/cacheflush.h>
+
+#include <mach/iommu.h>
+
+#include "iopgtable.h"
+
+/* accommodate the difference between omap1 and omap2/3 */
+static const struct iommu_functions *arch_iommu;
+
+static struct platform_driver omap_iommu_driver;
+static struct kmem_cache *iopte_cachep;
+
+/**
+ * install_iommu_arch - Install archtecure specific iommu functions
+ * @ops: a pointer to architecture specific iommu functions
+ *
+ * There are several kind of iommu algorithm(tlb, pagetable) among
+ * omap series. This interface installs such an iommu algorighm.
+ **/
+int install_iommu_arch(const struct iommu_functions *ops)
+{
+ if (arch_iommu)
+ return -EBUSY;
+
+ arch_iommu = ops;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(install_iommu_arch);
+
+/**
+ * uninstall_iommu_arch - Uninstall archtecure specific iommu functions
+ * @ops: a pointer to architecture specific iommu functions
+ *
+ * This interface uninstalls the iommu algorighm installed previously.
+ **/
+void uninstall_iommu_arch(const struct iommu_functions *ops)
+{
+ if (arch_iommu != ops)
+ pr_err("%s: not your arch\n", __func__);
+
+ arch_iommu = NULL;
+}
+EXPORT_SYMBOL_GPL(uninstall_iommu_arch);
+
+/**
+ * iommu_save_ctx - Save registers for pm off-mode support
+ * @obj: target iommu
+ **/
+void iommu_save_ctx(struct iommu *obj)
+{
+ arch_iommu->save_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_save_ctx);
+
+/**
+ * iommu_restore_ctx - Restore registers for pm off-mode support
+ * @obj: target iommu
+ **/
+void iommu_restore_ctx(struct iommu *obj)
+{
+ arch_iommu->restore_ctx(obj);
+}
+EXPORT_SYMBOL_GPL(iommu_restore_ctx);
+
+/**
+ * iommu_arch_version - Return running iommu arch version
+ **/
+u32 iommu_arch_version(void)
+{
+ return arch_iommu->version;
+}
+EXPORT_SYMBOL_GPL(iommu_arch_version);
+
+static int iommu_enable(struct iommu *obj)
+{
+ int err;
+
+ if (!obj)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ err = arch_iommu->enable(obj);
+
+ clk_disable(obj->clk);
+ return err;
+}
+
+static void iommu_disable(struct iommu *obj)
+{
+ if (!obj)
+ return;
+
+ clk_enable(obj->clk);
+
+ arch_iommu->disable(obj);
+
+ clk_disable(obj->clk);
+}
+
+/*
+ * TLB operations
+ */
+void iotlb_cr_to_e(struct cr_regs *cr, struct iotlb_entry *e)
+{
+ BUG_ON(!cr || !e);
+
+ arch_iommu->cr_to_e(cr, e);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_e);
+
+static inline int iotlb_cr_valid(struct cr_regs *cr)
+{
+ if (!cr)
+ return -EINVAL;
+
+ return arch_iommu->cr_valid(cr);
+}
+
+static inline struct cr_regs *iotlb_alloc_cr(struct iommu *obj,
+ struct iotlb_entry *e)
+{
+ if (!e)
+ return NULL;
+
+ return arch_iommu->alloc_cr(obj, e);
+}
+
+u32 iotlb_cr_to_virt(struct cr_regs *cr)
+{
+ return arch_iommu->cr_to_virt(cr);
+}
+EXPORT_SYMBOL_GPL(iotlb_cr_to_virt);
+
+static u32 get_iopte_attr(struct iotlb_entry *e)
+{
+ return arch_iommu->get_pte_attr(e);
+}
+
+static u32 iommu_report_fault(struct iommu *obj, u32 *da)
+{
+ return arch_iommu->fault_isr(obj, da);
+}
+
+static void iotlb_lock_get(struct iommu *obj, struct iotlb_lock *l)
+{
+ u32 val;
+
+ val = iommu_read_reg(obj, MMU_LOCK);
+
+ l->base = MMU_LOCK_BASE(val);
+ l->vict = MMU_LOCK_VICT(val);
+
+ BUG_ON(l->base != 0); /* Currently no preservation is used */
+}
+
+static void iotlb_lock_set(struct iommu *obj, struct iotlb_lock *l)
+{
+ u32 val;
+
+ BUG_ON(l->base != 0); /* Currently no preservation is used */
+
+ val = (l->base << MMU_LOCK_BASE_SHIFT);
+ val |= (l->vict << MMU_LOCK_VICT_SHIFT);
+
+ iommu_write_reg(obj, val, MMU_LOCK);
+}
+
+static void iotlb_read_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ arch_iommu->tlb_read_cr(obj, cr);
+}
+
+static void iotlb_load_cr(struct iommu *obj, struct cr_regs *cr)
+{
+ arch_iommu->tlb_load_cr(obj, cr);
+
+ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+ iommu_write_reg(obj, 1, MMU_LD_TLB);
+}
+
+/**
+ * iotlb_dump_cr - Dump an iommu tlb entry into buf
+ * @obj: target iommu
+ * @cr: contents of cam and ram register
+ * @buf: output buffer
+ **/
+static inline ssize_t iotlb_dump_cr(struct iommu *obj, struct cr_regs *cr,
+ char *buf)
+{
+ BUG_ON(!cr || !buf);
+
+ return arch_iommu->dump_cr(obj, cr, buf);
+}
+
+/**
+ * load_iotlb_entry - Set an iommu tlb entry
+ * @obj: target iommu
+ * @e: an iommu tlb entry info
+ **/
+int load_iotlb_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+ int i;
+ int err = 0;
+ struct iotlb_lock l;
+ struct cr_regs *cr;
+
+ if (!obj || !obj->nr_tlb_entries || !e)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ for (i = 0; i < obj->nr_tlb_entries; i++) {
+ struct cr_regs tmp;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = i;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &tmp);
+ if (!iotlb_cr_valid(&tmp))
+ break;
+ }
+
+ if (i == obj->nr_tlb_entries) {
+ dev_dbg(obj->dev, "%s: full: no entry\n", __func__);
+ err = -EBUSY;
+ goto out;
+ }
+
+ cr = iotlb_alloc_cr(obj, e);
+ if (IS_ERR(cr)) {
+ clk_disable(obj->clk);
+ return PTR_ERR(cr);
+ }
+
+ iotlb_load_cr(obj, cr);
+ kfree(cr);
+
+ /* increment victim for next tlb load */
+ if (++l.vict == obj->nr_tlb_entries)
+ l.vict = 0;
+ iotlb_lock_set(obj, &l);
+out:
+ clk_disable(obj->clk);
+ return err;
+}
+EXPORT_SYMBOL_GPL(load_iotlb_entry);
+
+/**
+ * flush_iotlb_page - Clear an iommu tlb entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_page(struct iommu *obj, u32 da)
+{
+ struct iotlb_lock l;
+ int i;
+
+ clk_enable(obj->clk);
+
+ for (i = 0; i < obj->nr_tlb_entries; i++) {
+ struct cr_regs cr;
+ u32 start;
+ size_t bytes;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = i;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &cr);
+ if (!iotlb_cr_valid(&cr))
+ continue;
+
+ start = iotlb_cr_to_virt(&cr);
+ bytes = iopgsz_to_bytes(cr.cam & 3);
+
+ if ((start <= da) && (da < start + bytes)) {
+ dev_dbg(obj->dev, "%s: %08x<=%08x(%x)\n",
+ __func__, start, da, bytes);
+
+ iommu_write_reg(obj, 1, MMU_FLUSH_ENTRY);
+ }
+ }
+ clk_disable(obj->clk);
+
+ if (i == obj->nr_tlb_entries)
+ dev_dbg(obj->dev, "%s: no page for %08x\n", __func__, da);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_page);
+
+/**
+ * flush_iotlb_range - Clear an iommu tlb entries
+ * @obj: target iommu
+ * @start: iommu device virtual address(start)
+ * @end: iommu device virtual address(end)
+ *
+ * Clear an iommu tlb entry which includes 'da' address.
+ **/
+void flush_iotlb_range(struct iommu *obj, u32 start, u32 end)
+{
+ u32 da = start;
+
+ while (da < end) {
+ flush_iotlb_page(obj, da);
+ /* FIXME: Optimize for multiple page size */
+ da += IOPTE_SIZE;
+ }
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_range);
+
+/**
+ * flush_iotlb_all - Clear all iommu tlb entries
+ * @obj: target iommu
+ **/
+void flush_iotlb_all(struct iommu *obj)
+{
+ struct iotlb_lock l;
+
+ clk_enable(obj->clk);
+
+ l.base = 0;
+ l.vict = 0;
+ iotlb_lock_set(obj, &l);
+
+ iommu_write_reg(obj, 1, MMU_GFLUSH);
+
+ clk_disable(obj->clk);
+}
+EXPORT_SYMBOL_GPL(flush_iotlb_all);
+
+#if defined(CONFIG_OMAP_IOMMU_DEBUG_MODULE)
+
+ssize_t iommu_dump_ctx(struct iommu *obj, char *buf)
+{
+ ssize_t bytes;
+
+ if (!obj || !buf)
+ return -EINVAL;
+
+ clk_enable(obj->clk);
+
+ bytes = arch_iommu->dump_ctx(obj, buf);
+
+ clk_disable(obj->clk);
+
+ return bytes;
+}
+EXPORT_SYMBOL_GPL(iommu_dump_ctx);
+
+static int __dump_tlb_entries(struct iommu *obj, struct cr_regs *crs)
+{
+ int i;
+ struct iotlb_lock saved, l;
+ struct cr_regs *p = crs;
+
+ clk_enable(obj->clk);
+
+ iotlb_lock_get(obj, &saved);
+ memcpy(&l, &saved, sizeof(saved));
+
+ for (i = 0; i < obj->nr_tlb_entries; i++) {
+ struct cr_regs tmp;
+
+ iotlb_lock_get(obj, &l);
+ l.vict = i;
+ iotlb_lock_set(obj, &l);
+ iotlb_read_cr(obj, &tmp);
+ if (!iotlb_cr_valid(&tmp))
+ continue;
+
+ *p++ = tmp;
+ }
+ iotlb_lock_set(obj, &saved);
+ clk_disable(obj->clk);
+
+ return p - crs;
+}
+
+/**
+ * dump_tlb_entries - dump cr arrays to given buffer
+ * @obj: target iommu
+ * @buf: output buffer
+ **/
+size_t dump_tlb_entries(struct iommu *obj, char *buf)
+{
+ int i, n;
+ struct cr_regs *cr;
+ char *p = buf;
+
+ cr = kcalloc(obj->nr_tlb_entries, sizeof(*cr), GFP_KERNEL);
+ if (!cr)
+ return 0;
+
+ n = __dump_tlb_entries(obj, cr);
+ for (i = 0; i < n; i++)
+ p += iotlb_dump_cr(obj, cr + i, p);
+ kfree(cr);
+
+ return p - buf;
+}
+EXPORT_SYMBOL_GPL(dump_tlb_entries);
+
+int foreach_iommu_device(void *data, int (*fn)(struct device *, void *))
+{
+ return driver_for_each_device(&omap_iommu_driver.driver,
+ NULL, data, fn);
+}
+EXPORT_SYMBOL_GPL(foreach_iommu_device);
+
+#endif /* CONFIG_OMAP_IOMMU_DEBUG_MODULE */
+
+/*
+ * H/W pagetable operations
+ */
+static void flush_iopgd_range(u32 *first, u32 *last)
+{
+ /* FIXME: L2 cache should be taken care of if it exists */
+ do {
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pgd"
+ : : "r" (first));
+ first += L1_CACHE_BYTES / sizeof(*first);
+ } while (first <= last);
+}
+
+static void flush_iopte_range(u32 *first, u32 *last)
+{
+ /* FIXME: L2 cache should be taken care of if it exists */
+ do {
+ asm("mcr p15, 0, %0, c7, c10, 1 @ flush_pte"
+ : : "r" (first));
+ first += L1_CACHE_BYTES / sizeof(*first);
+ } while (first <= last);
+}
+
+static void iopte_free(u32 *iopte)
+{
+ /* Note: freed iopte's must be clean ready for re-use */
+ kmem_cache_free(iopte_cachep, iopte);
+}
+
+static u32 *iopte_alloc(struct iommu *obj, u32 *iopgd, u32 da)
+{
+ u32 *iopte;
+
+ /* a table has already existed */
+ if (*iopgd)
+ goto pte_ready;
+
+ /*
+ * do the allocation outside the page table lock
+ */
+ spin_unlock(&obj->page_table_lock);
+ iopte = kmem_cache_zalloc(iopte_cachep, GFP_KERNEL);
+ spin_lock(&obj->page_table_lock);
+
+ if (!*iopgd) {
+ if (!iopte)
+ return ERR_PTR(-ENOMEM);
+
+ *iopgd = virt_to_phys(iopte) | IOPGD_TABLE;
+ flush_iopgd_range(iopgd, iopgd);
+
+ dev_vdbg(obj->dev, "%s: a new pte:%p\n", __func__, iopte);
+ } else {
+ /* We raced, free the reduniovant table */
+ iopte_free(iopte);
+ }
+
+pte_ready:
+ iopte = iopte_offset(iopgd, da);
+
+ dev_vdbg(obj->dev,
+ "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+ __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+ return iopte;
+}
+
+static int iopgd_alloc_section(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+
+ *iopgd = (pa & IOSECTION_MASK) | prot | IOPGD_SECTION;
+ flush_iopgd_range(iopgd, iopgd);
+ return 0;
+}
+
+static int iopgd_alloc_super(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ int i;
+
+ for (i = 0; i < 16; i++)
+ *(iopgd + i) = (pa & IOSUPER_MASK) | prot | IOPGD_SUPER;
+ flush_iopgd_range(iopgd, iopgd + 15);
+ return 0;
+}
+
+static int iopte_alloc_page(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ u32 *iopte = iopte_alloc(obj, iopgd, da);
+
+ if (IS_ERR(iopte))
+ return PTR_ERR(iopte);
+
+ *iopte = (pa & IOPAGE_MASK) | prot | IOPTE_SMALL;
+ flush_iopte_range(iopte, iopte);
+
+ dev_vdbg(obj->dev, "%s: da:%08x pa:%08x pte:%p *pte:%08x\n",
+ __func__, da, pa, iopte, *iopte);
+
+ return 0;
+}
+
+static int iopte_alloc_large(struct iommu *obj, u32 da, u32 pa, u32 prot)
+{
+ u32 *iopgd = iopgd_offset(obj, da);
+ u32 *iopte = iopte_alloc(obj, iopgd, da);
+ int i;
+
+ if (IS_ERR(iopte))
+ return PTR_ERR(iopte);
+
+ for (i = 0; i < 16; i++)
+ *(iopte + i) = (pa & IOLARGE_MASK) | prot | IOPTE_LARGE;
+ flush_iopte_range(iopte, iopte + 15);
+ return 0;
+}
+
+static int iopgtable_store_entry_core(struct iommu *obj, struct iotlb_entry *e)
+{
+ int (*fn)(struct iommu *, u32, u32, u32);
+ u32 prot;
+ int err;
+
+ if (!obj || !e)
+ return -EINVAL;
+
+ switch (e->pgsz) {
+ case MMU_CAM_PGSZ_16M:
+ fn = iopgd_alloc_super;
+ break;
+ case MMU_CAM_PGSZ_1M:
+ fn = iopgd_alloc_section;
+ break;
+ case MMU_CAM_PGSZ_64K:
+ fn = iopte_alloc_large;
+ break;
+ case MMU_CAM_PGSZ_4K:
+ fn = iopte_alloc_page;
+ break;
+ default:
+ fn = NULL;
+ BUG();
+ break;
+ }
+
+ prot = get_iopte_attr(e);
+
+ spin_lock(&obj->page_table_lock);
+ err = fn(obj, e->da, e->pa, prot);
+ spin_unlock(&obj->page_table_lock);
+
+ return err;
+}
+
+/**
+ * iopgtable_store_entry - Make an iommu pte entry
+ * @obj: target iommu
+ * @e: an iommu tlb entry info
+ **/
+int iopgtable_store_entry(struct iommu *obj, struct iotlb_entry *e)
+{
+ int err;
+
+ flush_iotlb_page(obj, e->da);
+ err = iopgtable_store_entry_core(obj, e);
+#ifdef PREFETCH_IOTLB
+ if (!err)
+ load_iotlb_entry(obj, e);
+#endif
+ return err;
+}
+EXPORT_SYMBOL_GPL(iopgtable_store_entry);
+
+/**
+ * iopgtable_lookup_entry - Lookup an iommu pte entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ * @ppgd: iommu pgd entry pointer to be returned
+ * @ppte: iommu pte entry pointer to be returned
+ **/
+void iopgtable_lookup_entry(struct iommu *obj, u32 da, u32 **ppgd, u32 **ppte)
+{
+ u32 *iopgd, *iopte = NULL;
+
+ iopgd = iopgd_offset(obj, da);
+ if (!*iopgd)
+ goto out;
+
+ if (*iopgd & IOPGD_TABLE)
+ iopte = iopte_offset(iopgd, da);
+out:
+ *ppgd = iopgd;
+ *ppte = iopte;
+}
+EXPORT_SYMBOL_GPL(iopgtable_lookup_entry);
+
+static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
+{
+ size_t bytes;
+ u32 *iopgd = iopgd_offset(obj, da);
+ int nent = 1;
+
+ if (!*iopgd)
+ return 0;
+
+ if (*iopgd & IOPGD_TABLE) {
+ int i;
+ u32 *iopte = iopte_offset(iopgd, da);
+
+ bytes = IOPTE_SIZE;
+ if (*iopte & IOPTE_LARGE) {
+ nent *= 16;
+ /* rewind to the 1st entry */
+ iopte = (u32 *)((u32)iopte & IOLARGE_MASK);
+ }
+ bytes *= nent;
+ memset(iopte, 0, nent * sizeof(*iopte));
+ flush_iopte_range(iopte, iopte + (nent - 1) * sizeof(*iopte));
+
+ /*
+ * do table walk to check if this table is necessary or not
+ */
+ iopte = iopte_offset(iopgd, 0);
+ for (i = 0; i < PTRS_PER_IOPTE; i++)
+ if (iopte[i])
+ goto out;
+
+ iopte_free(iopte);
+ nent = 1; /* for the next L1 entry */
+ } else {
+ bytes = IOPGD_SIZE;
+ if (*iopgd & IOPGD_SUPER) {
+ nent *= 16;
+ /* rewind to the 1st entry */
+ iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);
+ }
+ bytes *= nent;
+ }
+ memset(iopgd, 0, nent * sizeof(*iopgd));
+ flush_iopgd_range(iopgd, iopgd + (nent - 1) * sizeof(*iopgd));
+out:
+ return bytes;
+}
+
+/**
+ * iopgtable_clear_entry - Remove an iommu pte entry
+ * @obj: target iommu
+ * @da: iommu device virtual address
+ **/
+size_t iopgtable_clear_entry(struct iommu *obj, u32 da)
+{
+ size_t bytes;
+
+ spin_lock(&obj->page_table_lock);
+
+ bytes = iopgtable_clear_entry_core(obj, da);
+ flush_iotlb_page(obj, da);
+
+ spin_unlock(&obj->page_table_lock);
+
+ return bytes;
+}
+EXPORT_SYMBOL_GPL(iopgtable_clear_entry);
+
+static void iopgtable_clear_entry_all(struct iommu *obj)
+{
+ int i;
+
+ spin_lock(&obj->page_table_lock);
+
+ for (i = 0; i < PTRS_PER_IOPGD; i++) {
+ u32 da;
+ u32 *iopgd;
+
+ da = i << IOPGD_SHIFT;
+ iopgd = iopgd_offset(obj, da);
+
+ if (!*iopgd)
+ continue;
+
+ if (*iopgd & IOPGD_TABLE)
+ iopte_free(iopte_offset(iopgd, 0));
+
+ *iopgd = 0;
+ flush_iopgd_range(iopgd, iopgd);
+ }
+
+ flush_iotlb_all(obj);
+
+ spin_unlock(&obj->page_table_lock);
+}
+
+/*
+ * Device IOMMU generic operations
+ */
+static irqreturn_t iommu_fault_handler(int irq, void *data)
+{
+ u32 stat, da;
+ u32 *iopgd, *iopte;
+ int err = -EIO;
+ struct iommu *obj = data;
+
+ if (!obj->refcount)
+ return IRQ_NONE;
+
+ /* Dynamic loading TLB or PTE */
+ if (obj->isr)
+ err = obj->isr(obj);
+
+ if (!err)
+ return IRQ_HANDLED;
+
+ clk_enable(obj->clk);
+ stat = iommu_report_fault(obj, &da);
+ clk_disable(obj->clk);
+ if (!stat)
+ return IRQ_HANDLED;
+
+ iopgd = iopgd_offset(obj, da);
+
+ if (!(*iopgd & IOPGD_TABLE)) {
+ dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x\n", __func__,
+ da, iopgd, *iopgd);
+ return IRQ_NONE;
+ }
+
+ iopte = iopte_offset(iopgd, da);
+
+ dev_err(obj->dev, "%s: da:%08x pgd:%p *pgd:%08x pte:%p *pte:%08x\n",
+ __func__, da, iopgd, *iopgd, iopte, *iopte);
+
+ return IRQ_NONE;
+}
+
+static int device_match_by_alias(struct device *dev, void *data)
+{
+ struct iommu *obj = to_iommu(dev);
+ const char *name = data;
+
+ pr_debug("%s: %s %s\n", __func__, obj->name, name);
+
+ return strcmp(obj->name, name) == 0;
+}
+
+/**
+ * iommu_get - Get iommu handler
+ * @name: target iommu name
+ **/
+struct iommu *iommu_get(const char *name)
+{
+ int err = -ENOMEM;
+ struct device *dev;
+ struct iommu *obj;
+
+ dev = driver_find_device(&omap_iommu_driver.driver, NULL, (void *)name,
+ device_match_by_alias);
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ obj = to_iommu(dev);
+
+ mutex_lock(&obj->iommu_lock);
+
+ if (obj->refcount++ == 0) {
+ err = iommu_enable(obj);
+ if (err)
+ goto err_enable;
+ flush_iotlb_all(obj);
+ }
+
+ if (!try_module_get(obj->owner))
+ goto err_module;
+
+ mutex_unlock(&obj->iommu_lock);
+
+ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+ return obj;
+
+err_module:
+ if (obj->refcount == 1)
+ iommu_disable(obj);
+err_enable:
+ obj->refcount--;
+ mutex_unlock(&obj->iommu_lock);
+ return ERR_PTR(err);
+}
+EXPORT_SYMBOL_GPL(iommu_get);
+
+/**
+ * iommu_put - Put back iommu handler
+ * @obj: target iommu
+ **/
+void iommu_put(struct iommu *obj)
+{
+ if (!obj && IS_ERR(obj))
+ return;
+
+ mutex_lock(&obj->iommu_lock);
+
+ if (--obj->refcount == 0)
+ iommu_disable(obj);
+
+ module_put(obj->owner);
+
+ mutex_unlock(&obj->iommu_lock);
+
+ dev_dbg(obj->dev, "%s: %s\n", __func__, obj->name);
+}
+EXPORT_SYMBOL_GPL(iommu_put);
+
+/*
+ * OMAP Device MMU(IOMMU) detection
+ */
+static int __devinit omap_iommu_probe(struct platform_device *pdev)
+{
+ int err = -ENODEV;
+ void *p;
+ int irq;
+ struct iommu *obj;
+ struct resource *res;
+ struct iommu_platform_data *pdata = pdev->dev.platform_data;
+
+ if (pdev->num_resources != 2)
+ return -EINVAL;
+
+ obj = kzalloc(sizeof(*obj) + MMU_REG_SIZE, GFP_KERNEL);
+ if (!obj)
+ return -ENOMEM;
+
+ obj->clk = clk_get(&pdev->dev, pdata->clk_name);
+ if (IS_ERR(obj->clk))
+ goto err_clk;
+
+ obj->nr_tlb_entries = pdata->nr_tlb_entries;
+ obj->name = pdata->name;
+ obj->dev = &pdev->dev;
+ obj->ctx = (void *)obj + sizeof(*obj);
+
+ mutex_init(&obj->iommu_lock);
+ mutex_init(&obj->mmap_lock);
+ spin_lock_init(&obj->page_table_lock);
+ INIT_LIST_HEAD(&obj->mmap);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENODEV;
+ goto err_mem;
+ }
+ obj->regbase = ioremap(res->start, resource_size(res));
+ if (!obj->regbase) {
+ err = -ENOMEM;
+ goto err_mem;
+ }
+
+ res = request_mem_region(res->start, resource_size(res),
+ dev_name(&pdev->dev));
+ if (!res) {
+ err = -EIO;
+ goto err_mem;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ err = -ENODEV;
+ goto err_irq;
+ }
+ err = request_irq(irq, iommu_fault_handler, IRQF_SHARED,
+ dev_name(&pdev->dev), obj);
+ if (err < 0)
+ goto err_irq;
+ platform_set_drvdata(pdev, obj);
+
+ p = (void *)__get_free_pages(GFP_KERNEL, get_order(IOPGD_TABLE_SIZE));
+ if (!p) {
+ err = -ENOMEM;
+ goto err_pgd;
+ }
+ memset(p, 0, IOPGD_TABLE_SIZE);
+ clean_dcache_area(p, IOPGD_TABLE_SIZE);
+ obj->iopgd = p;
+
+ BUG_ON(!IS_ALIGNED((unsigned long)obj->iopgd, IOPGD_TABLE_SIZE));
+
+ dev_info(&pdev->dev, "%s registered\n", obj->name);
+ return 0;
+
+err_pgd:
+ free_irq(irq, obj);
+err_irq:
+ release_mem_region(res->start, resource_size(res));
+ iounmap(obj->regbase);
+err_mem:
+ clk_put(obj->clk);
+err_clk:
+ kfree(obj);
+ return err;
+}
+
+static int __devexit omap_iommu_remove(struct platform_device *pdev)
+{
+ int irq;
+ struct resource *res;
+ struct iommu *obj = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+
+ iopgtable_clear_entry_all(obj);
+ free_pages((unsigned long)obj->iopgd, get_order(IOPGD_TABLE_SIZE));
+
+ irq = platform_get_irq(pdev, 0);
+ free_irq(irq, obj);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+ iounmap(obj->regbase);
+
+ clk_put(obj->clk);
+ dev_info(&pdev->dev, "%s removed\n", obj->name);
+ kfree(obj);
+ return 0;
+}
+
+static struct platform_driver omap_iommu_driver = {
+ .probe = omap_iommu_probe,
+ .remove = __devexit_p(omap_iommu_remove),
+ .driver = {
+ .name = "omap-iommu",
+ },
+};
+
+static void iopte_cachep_ctor(void *iopte)
+{
+ clean_dcache_area(iopte, IOPTE_TABLE_SIZE);
+}
+
+static int __init omap_iommu_init(void)
+{
+ struct kmem_cache *p;
+ const unsigned long flags = SLAB_HWCACHE_ALIGN;
+ size_t align = 1 << 10; /* L2 pagetable alignement */
+
+ p = kmem_cache_create("iopte_cache", IOPTE_TABLE_SIZE, align, flags,
+ iopte_cachep_ctor);
+ if (!p)
+ return -ENOMEM;
+ iopte_cachep = p;
+
+ return platform_driver_register(&omap_iommu_driver);
+}
+module_init(omap_iommu_init);
+
+static void __exit omap_iommu_exit(void)
+{
+ kmem_cache_destroy(iopte_cachep);
+
+ platform_driver_unregister(&omap_iommu_driver);
+}
+module_exit(omap_iommu_exit);
+
+MODULE_DESCRIPTION("omap iommu: tlb and pagetable primitives");
+MODULE_ALIAS("platform:omap-iommu");
+MODULE_AUTHOR("Hiroshi DOYU, Paul Mundt and Toshihiro Kobayashi");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * omap iommu: pagetable definitions
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PLAT_OMAP_IOMMU_H
+#define __PLAT_OMAP_IOMMU_H
+
+#define IOPGD_SHIFT 20
+#define IOPGD_SIZE (1 << IOPGD_SHIFT)
+#define IOPGD_MASK (~(IOPGD_SIZE - 1))
+#define IOSECTION_MASK IOPGD_MASK
+#define PTRS_PER_IOPGD (1 << (32 - IOPGD_SHIFT))
+#define IOPGD_TABLE_SIZE (PTRS_PER_IOPGD * sizeof(u32))
+
+#define IOSUPER_SIZE (IOPGD_SIZE << 4)
+#define IOSUPER_MASK (~(IOSUPER_SIZE - 1))
+
+#define IOPTE_SHIFT 12
+#define IOPTE_SIZE (1 << IOPTE_SHIFT)
+#define IOPTE_MASK (~(IOPTE_SIZE - 1))
+#define IOPAGE_MASK IOPTE_MASK
+#define PTRS_PER_IOPTE (1 << (IOPGD_SHIFT - IOPTE_SHIFT))
+#define IOPTE_TABLE_SIZE (PTRS_PER_IOPTE * sizeof(u32))
+
+#define IOLARGE_SIZE (IOPTE_SIZE << 4)
+#define IOLARGE_MASK (~(IOLARGE_SIZE - 1))
+
+#define IOPGD_TABLE (1 << 0)
+#define IOPGD_SECTION (2 << 0)
+#define IOPGD_SUPER (1 << 18 | 2 << 0)
+
+#define IOPTE_SMALL (2 << 0)
+#define IOPTE_LARGE (1 << 0)
+
+#define iopgd_index(da) (((da) >> IOPGD_SHIFT) & (PTRS_PER_IOPGD - 1))
+#define iopgd_offset(obj, da) ((obj)->iopgd + iopgd_index(da))
+
+#define iopte_paddr(iopgd) (*iopgd & ~((1 << 10) - 1))
+#define iopte_vaddr(iopgd) ((u32 *)phys_to_virt(iopte_paddr(iopgd)))
+
+#define iopte_index(da) (((da) >> IOPTE_SHIFT) & (PTRS_PER_IOPTE - 1))
+#define iopte_offset(iopgd, da) (iopte_vaddr(iopgd) + iopte_index(da))
+
+static inline u32 iotlb_init_entry(struct iotlb_entry *e, u32 da, u32 pa,
+ u32 flags)
+{
+ memset(e, 0, sizeof(*e));
+
+ e->da = da;
+ e->pa = pa;
+ e->valid = 1;
+ /* FIXME: add OMAP1 support */
+ e->pgsz = flags & MMU_CAM_PGSZ_MASK;
+ e->endian = flags & MMU_RAM_ENDIAN_MASK;
+ e->elsz = flags & MMU_RAM_ELSZ_MASK;
+ e->mixed = flags & MMU_RAM_MIXED_MASK;
+
+ return iopgsz_to_bytes(e->pgsz);
+}
+
+#define to_iommu(dev) \
+ (struct iommu *)platform_get_drvdata(to_platform_device(dev))
+
+#endif /* __PLAT_OMAP_IOMMU_H */
--- /dev/null
+/*
+ * omap iommu: simple virtual address space management
+ *
+ * Copyright (C) 2008-2009 Nokia Corporation
+ *
+ * Written by Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/vmalloc.h>
+#include <linux/device.h>
+#include <linux/scatterlist.h>
+
+#include <asm/cacheflush.h>
+#include <asm/mach/map.h>
+
+#include <mach/iommu.h>
+#include <mach/iovmm.h>
+
+#include "iopgtable.h"
+
+/*
+ * A device driver needs to create address mappings between:
+ *
+ * - iommu/device address
+ * - physical address
+ * - mpu virtual address
+ *
+ * There are 4 possible patterns for them:
+ *
+ * |iova/ mapping iommu_ page
+ * | da pa va (d)-(p)-(v) function type
+ * ---------------------------------------------------------------------------
+ * 1 | c c c 1 - 1 - 1 _kmap() / _kunmap() s
+ * 2 | c c,a c 1 - 1 - 1 _kmalloc()/ _kfree() s
+ * 3 | c d c 1 - n - 1 _vmap() / _vunmap() s
+ * 4 | c d,a c 1 - n - 1 _vmalloc()/ _vfree() n*
+ *
+ *
+ * 'iova': device iommu virtual address
+ * 'da': alias of 'iova'
+ * 'pa': physical address
+ * 'va': mpu virtual address
+ *
+ * 'c': contiguous memory area
+ * 'd': dicontiguous memory area
+ * 'a': anonymous memory allocation
+ * '()': optional feature
+ *
+ * 'n': a normal page(4KB) size is used.
+ * 's': multiple iommu superpage(16MB, 1MB, 64KB, 4KB) size is used.
+ *
+ * '*': not yet, but feasible.
+ */
+
+static struct kmem_cache *iovm_area_cachep;
+
+/* return total bytes of sg buffers */
+static size_t sgtable_len(const struct sg_table *sgt)
+{
+ unsigned int i, total = 0;
+ struct scatterlist *sg;
+
+ if (!sgt)
+ return 0;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+
+ bytes = sg_dma_len(sg);
+
+ if (!iopgsz_ok(bytes)) {
+ pr_err("%s: sg[%d] not iommu pagesize(%x)\n",
+ __func__, i, bytes);
+ return 0;
+ }
+
+ total += bytes;
+ }
+
+ return total;
+}
+#define sgtable_ok(x) (!!sgtable_len(x))
+
+/*
+ * calculate the optimal number sg elements from total bytes based on
+ * iommu superpages
+ */
+static unsigned int sgtable_nents(size_t bytes)
+{
+ int i;
+ unsigned int nr_entries;
+ const unsigned long pagesize[] = { SZ_16M, SZ_1M, SZ_64K, SZ_4K, };
+
+ if (!IS_ALIGNED(bytes, PAGE_SIZE)) {
+ pr_err("%s: wrong size %08x\n", __func__, bytes);
+ return 0;
+ }
+
+ nr_entries = 0;
+ for (i = 0; i < ARRAY_SIZE(pagesize); i++) {
+ if (bytes >= pagesize[i]) {
+ nr_entries += (bytes / pagesize[i]);
+ bytes %= pagesize[i];
+ }
+ }
+ BUG_ON(bytes);
+
+ return nr_entries;
+}
+
+/* allocate and initialize sg_table header(a kind of 'superblock') */
+static struct sg_table *sgtable_alloc(const size_t bytes, u32 flags)
+{
+ unsigned int nr_entries;
+ int err;
+ struct sg_table *sgt;
+
+ if (!bytes)
+ return ERR_PTR(-EINVAL);
+
+ if (!IS_ALIGNED(bytes, PAGE_SIZE))
+ return ERR_PTR(-EINVAL);
+
+ /* FIXME: IOVMF_DA_FIXED should support 'superpages' */
+ if ((flags & IOVMF_LINEAR) && (flags & IOVMF_DA_ANON)) {
+ nr_entries = sgtable_nents(bytes);
+ if (!nr_entries)
+ return ERR_PTR(-EINVAL);
+ } else
+ nr_entries = bytes / PAGE_SIZE;
+
+ sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
+ if (!sgt)
+ return ERR_PTR(-ENOMEM);
+
+ err = sg_alloc_table(sgt, nr_entries, GFP_KERNEL);
+ if (err)
+ return ERR_PTR(err);
+
+ pr_debug("%s: sgt:%p(%d entries)\n", __func__, sgt, nr_entries);
+
+ return sgt;
+}
+
+/* free sg_table header(a kind of superblock) */
+static void sgtable_free(struct sg_table *sgt)
+{
+ if (!sgt)
+ return;
+
+ sg_free_table(sgt);
+ kfree(sgt);
+
+ pr_debug("%s: sgt:%p\n", __func__, sgt);
+}
+
+/* map 'sglist' to a contiguous mpu virtual area and return 'va' */
+static void *vmap_sg(const struct sg_table *sgt)
+{
+ u32 va;
+ size_t total;
+ unsigned int i;
+ struct scatterlist *sg;
+ struct vm_struct *new;
+ const struct mem_type *mtype;
+
+ mtype = get_mem_type(MT_DEVICE);
+ if (!mtype)
+ return ERR_PTR(-EINVAL);
+
+ total = sgtable_len(sgt);
+ if (!total)
+ return ERR_PTR(-EINVAL);
+
+ new = __get_vm_area(total, VM_IOREMAP, VMALLOC_START, VMALLOC_END);
+ if (!new)
+ return ERR_PTR(-ENOMEM);
+ va = (u32)new->addr;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+ u32 pa;
+ int err;
+
+ pa = sg_phys(sg);
+ bytes = sg_dma_len(sg);
+
+ BUG_ON(bytes != PAGE_SIZE);
+
+ err = ioremap_page(va, pa, mtype);
+ if (err)
+ goto err_out;
+
+ va += bytes;
+ }
+
+ flush_cache_vmap(new->addr, total);
+ return new->addr;
+
+err_out:
+ WARN_ON(1); /* FIXME: cleanup some mpu mappings */
+ vunmap(new->addr);
+ return ERR_PTR(-EAGAIN);
+}
+
+static inline void vunmap_sg(const void *va)
+{
+ vunmap(va);
+}
+
+static struct iovm_struct *__find_iovm_area(struct iommu *obj, const u32 da)
+{
+ struct iovm_struct *tmp;
+
+ list_for_each_entry(tmp, &obj->mmap, list) {
+ if ((da >= tmp->da_start) && (da < tmp->da_end)) {
+ size_t len;
+
+ len = tmp->da_end - tmp->da_start;
+
+ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n",
+ __func__, tmp->da_start, da, tmp->da_end, len,
+ tmp->flags);
+
+ return tmp;
+ }
+ }
+
+ return NULL;
+}
+
+/**
+ * find_iovm_area - find iovma which includes @da
+ * @da: iommu device virtual address
+ *
+ * Find the existing iovma starting at @da
+ */
+struct iovm_struct *find_iovm_area(struct iommu *obj, u32 da)
+{
+ struct iovm_struct *area;
+
+ mutex_lock(&obj->mmap_lock);
+ area = __find_iovm_area(obj, da);
+ mutex_unlock(&obj->mmap_lock);
+
+ return area;
+}
+EXPORT_SYMBOL_GPL(find_iovm_area);
+
+/*
+ * This finds the hole(area) which fits the requested address and len
+ * in iovmas mmap, and returns the new allocated iovma.
+ */
+static struct iovm_struct *alloc_iovm_area(struct iommu *obj, u32 da,
+ size_t bytes, u32 flags)
+{
+ struct iovm_struct *new, *tmp;
+ u32 start, prev_end, alignement;
+
+ if (!obj || !bytes)
+ return ERR_PTR(-EINVAL);
+
+ start = da;
+ alignement = PAGE_SIZE;
+
+ if (flags & IOVMF_DA_ANON) {
+ /*
+ * Reserve the first page for NULL
+ */
+ start = PAGE_SIZE;
+ if (flags & IOVMF_LINEAR)
+ alignement = iopgsz_max(bytes);
+ start = roundup(start, alignement);
+ }
+
+ tmp = NULL;
+ if (list_empty(&obj->mmap))
+ goto found;
+
+ prev_end = 0;
+ list_for_each_entry(tmp, &obj->mmap, list) {
+
+ if ((prev_end <= start) && (start + bytes < tmp->da_start))
+ goto found;
+
+ if (flags & IOVMF_DA_ANON)
+ start = roundup(tmp->da_end, alignement);
+
+ prev_end = tmp->da_end;
+ }
+
+ if ((start >= prev_end) && (ULONG_MAX - start >= bytes))
+ goto found;
+
+ dev_dbg(obj->dev, "%s: no space to fit %08x(%x) flags: %08x\n",
+ __func__, da, bytes, flags);
+
+ return ERR_PTR(-EINVAL);
+
+found:
+ new = kmem_cache_zalloc(iovm_area_cachep, GFP_KERNEL);
+ if (!new)
+ return ERR_PTR(-ENOMEM);
+
+ new->iommu = obj;
+ new->da_start = start;
+ new->da_end = start + bytes;
+ new->flags = flags;
+
+ /*
+ * keep ascending order of iovmas
+ */
+ if (tmp)
+ list_add_tail(&new->list, &tmp->list);
+ else
+ list_add(&new->list, &obj->mmap);
+
+ dev_dbg(obj->dev, "%s: found %08x-%08x-%08x(%x) %08x\n",
+ __func__, new->da_start, start, new->da_end, bytes, flags);
+
+ return new;
+}
+
+static void free_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+ size_t bytes;
+
+ BUG_ON(!obj || !area);
+
+ bytes = area->da_end - area->da_start;
+
+ dev_dbg(obj->dev, "%s: %08x-%08x(%x) %08x\n",
+ __func__, area->da_start, area->da_end, bytes, area->flags);
+
+ list_del(&area->list);
+ kmem_cache_free(iovm_area_cachep, area);
+}
+
+/**
+ * da_to_va - convert (d) to (v)
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ * @va: mpu virtual address
+ *
+ * Returns mpu virtual addr which corresponds to a given device virtual addr
+ */
+void *da_to_va(struct iommu *obj, u32 da)
+{
+ void *va = NULL;
+ struct iovm_struct *area;
+
+ mutex_lock(&obj->mmap_lock);
+
+ area = __find_iovm_area(obj, da);
+ if (!area) {
+ dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+ goto out;
+ }
+ va = area->va;
+ mutex_unlock(&obj->mmap_lock);
+out:
+ return va;
+}
+EXPORT_SYMBOL_GPL(da_to_va);
+
+static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
+{
+ unsigned int i;
+ struct scatterlist *sg;
+ void *va = _va;
+ void *va_end;
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ struct page *pg;
+ const size_t bytes = PAGE_SIZE;
+
+ /*
+ * iommu 'superpage' isn't supported with 'iommu_vmalloc()'
+ */
+ pg = vmalloc_to_page(va);
+ BUG_ON(!pg);
+ sg_set_page(sg, pg, bytes, 0);
+
+ va += bytes;
+ }
+
+ va_end = _va + PAGE_SIZE * i;
+ flush_cache_vmap(_va, va_end);
+}
+
+static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
+{
+ /*
+ * Actually this is not necessary at all, just exists for
+ * consistency of the code readibility.
+ */
+ BUG_ON(!sgt);
+}
+
+static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
+{
+ unsigned int i;
+ struct scatterlist *sg;
+ void *va;
+
+ va = phys_to_virt(pa);
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ size_t bytes;
+
+ bytes = iopgsz_max(len);
+
+ BUG_ON(!iopgsz_ok(bytes));
+
+ sg_set_buf(sg, phys_to_virt(pa), bytes);
+ /*
+ * 'pa' is cotinuous(linear).
+ */
+ pa += bytes;
+ len -= bytes;
+ }
+ BUG_ON(len);
+
+ clean_dcache_area(va, len);
+}
+
+static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
+{
+ /*
+ * Actually this is not necessary at all, just exists for
+ * consistency of the code readibility
+ */
+ BUG_ON(!sgt);
+}
+
+/* create 'da' <-> 'pa' mapping from 'sgt' */
+static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
+ const struct sg_table *sgt, u32 flags)
+{
+ int err;
+ unsigned int i, j;
+ struct scatterlist *sg;
+ u32 da = new->da_start;
+
+ if (!obj || !new || !sgt)
+ return -EINVAL;
+
+ BUG_ON(!sgtable_ok(sgt));
+
+ for_each_sg(sgt->sgl, sg, sgt->nents, i) {
+ u32 pa;
+ int pgsz;
+ size_t bytes;
+ struct iotlb_entry e;
+
+ pa = sg_phys(sg);
+ bytes = sg_dma_len(sg);
+
+ flags &= ~IOVMF_PGSZ_MASK;
+ pgsz = bytes_to_iopgsz(bytes);
+ if (pgsz < 0)
+ goto err_out;
+ flags |= pgsz;
+
+ pr_debug("%s: [%d] %08x %08x(%x)\n", __func__,
+ i, da, pa, bytes);
+
+ iotlb_init_entry(&e, da, pa, flags);
+ err = iopgtable_store_entry(obj, &e);
+ if (err)
+ goto err_out;
+
+ da += bytes;
+ }
+ return 0;
+
+err_out:
+ da = new->da_start;
+
+ for_each_sg(sgt->sgl, sg, i, j) {
+ size_t bytes;
+
+ bytes = iopgtable_clear_entry(obj, da);
+
+ BUG_ON(!iopgsz_ok(bytes));
+
+ da += bytes;
+ }
+ return err;
+}
+
+/* release 'da' <-> 'pa' mapping */
+static void unmap_iovm_area(struct iommu *obj, struct iovm_struct *area)
+{
+ u32 start;
+ size_t total = area->da_end - area->da_start;
+
+ BUG_ON((!total) || !IS_ALIGNED(total, PAGE_SIZE));
+
+ start = area->da_start;
+ while (total > 0) {
+ size_t bytes;
+
+ bytes = iopgtable_clear_entry(obj, start);
+ if (bytes == 0)
+ bytes = PAGE_SIZE;
+ else
+ dev_dbg(obj->dev, "%s: unmap %08x(%x) %08x\n",
+ __func__, start, bytes, area->flags);
+
+ BUG_ON(!IS_ALIGNED(bytes, PAGE_SIZE));
+
+ total -= bytes;
+ start += bytes;
+ }
+ BUG_ON(total);
+}
+
+/* template function for all unmapping */
+static struct sg_table *unmap_vm_area(struct iommu *obj, const u32 da,
+ void (*fn)(const void *), u32 flags)
+{
+ struct sg_table *sgt = NULL;
+ struct iovm_struct *area;
+
+ if (!IS_ALIGNED(da, PAGE_SIZE)) {
+ dev_err(obj->dev, "%s: alignment err(%08x)\n", __func__, da);
+ return NULL;
+ }
+
+ mutex_lock(&obj->mmap_lock);
+
+ area = __find_iovm_area(obj, da);
+ if (!area) {
+ dev_dbg(obj->dev, "%s: no da area(%08x)\n", __func__, da);
+ goto out;
+ }
+
+ if ((area->flags & flags) != flags) {
+ dev_err(obj->dev, "%s: wrong flags(%08x)\n", __func__,
+ area->flags);
+ goto out;
+ }
+ sgt = (struct sg_table *)area->sgt;
+
+ unmap_iovm_area(obj, area);
+
+ fn(area->va);
+
+ dev_dbg(obj->dev, "%s: %08x-%08x-%08x(%x) %08x\n", __func__,
+ area->da_start, da, area->da_end,
+ area->da_end - area->da_start, area->flags);
+
+ free_iovm_area(obj, area);
+out:
+ mutex_unlock(&obj->mmap_lock);
+
+ return sgt;
+}
+
+static u32 map_iommu_region(struct iommu *obj, u32 da,
+ const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+ int err = -ENOMEM;
+ struct iovm_struct *new;
+
+ mutex_lock(&obj->mmap_lock);
+
+ new = alloc_iovm_area(obj, da, bytes, flags);
+ if (IS_ERR(new)) {
+ err = PTR_ERR(new);
+ goto err_alloc_iovma;
+ }
+ new->va = va;
+ new->sgt = sgt;
+
+ if (map_iovm_area(obj, new, sgt, new->flags))
+ goto err_map;
+
+ mutex_unlock(&obj->mmap_lock);
+
+ dev_dbg(obj->dev, "%s: da:%08x(%x) flags:%08x va:%p\n",
+ __func__, new->da_start, bytes, new->flags, va);
+
+ return new->da_start;
+
+err_map:
+ free_iovm_area(obj, new);
+err_alloc_iovma:
+ mutex_unlock(&obj->mmap_lock);
+ return err;
+}
+
+static inline u32 __iommu_vmap(struct iommu *obj, u32 da,
+ const struct sg_table *sgt, void *va, size_t bytes, u32 flags)
+{
+ return map_iommu_region(obj, da, sgt, va, bytes, flags);
+}
+
+/**
+ * iommu_vmap - (d)-(p)-(v) address mapper
+ * @obj: objective iommu
+ * @sgt: address of scatter gather table
+ * @flags: iovma and page property
+ *
+ * Creates 1-n-1 mapping with given @sgt and returns @da.
+ * All @sgt element must be io page size aligned.
+ */
+u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
+ u32 flags)
+{
+ size_t bytes;
+ void *va;
+
+ if (!obj || !obj->dev || !sgt)
+ return -EINVAL;
+
+ bytes = sgtable_len(sgt);
+ if (!bytes)
+ return -EINVAL;
+ bytes = PAGE_ALIGN(bytes);
+
+ va = vmap_sg(sgt);
+ if (IS_ERR(va))
+ return PTR_ERR(va);
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_DISCONT;
+ flags |= IOVMF_MMIO;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ vunmap_sg(va);
+
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmap);
+
+/**
+ * iommu_vunmap - release virtual mapping obtained by 'iommu_vmap()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Free the iommu virtually contiguous memory area starting at
+ * @da, which was returned by 'iommu_vmap()'.
+ */
+struct sg_table *iommu_vunmap(struct iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+ /*
+ * 'sgt' is allocated before 'iommu_vmalloc()' is called.
+ * Just returns 'sgt' to the caller to free
+ */
+ sgt = unmap_vm_area(obj, da, vunmap_sg, IOVMF_DISCONT | IOVMF_MMIO);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ return sgt;
+}
+EXPORT_SYMBOL_GPL(iommu_vunmap);
+
+/**
+ * iommu_vmalloc - (d)-(p)-(v) address allocator and mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @bytes: allocation size
+ * @flags: iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-n-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_vmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+ void *va;
+ struct sg_table *sgt;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = vmalloc(bytes);
+ if (!va)
+ return -ENOMEM;
+
+ sgt = sgtable_alloc(bytes, flags);
+ if (IS_ERR(sgt)) {
+ da = PTR_ERR(sgt);
+ goto err_sgt_alloc;
+ }
+ sgtable_fill_vmalloc(sgt, va);
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_DISCONT;
+ flags |= IOVMF_ALLOC;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_vmap(obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ goto err_iommu_vmap;
+
+ return da;
+
+err_iommu_vmap:
+ sgtable_drain_vmalloc(sgt);
+ sgtable_free(sgt);
+err_sgt_alloc:
+ vfree(va);
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_vmalloc);
+
+/**
+ * iommu_vfree - release memory allocated by 'iommu_vmalloc()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually continuous memory area starting at
+ * @da, as obtained from 'iommu_vmalloc()'.
+ */
+void iommu_vfree(struct iommu *obj, const u32 da)
+{
+ struct sg_table *sgt;
+
+ sgt = unmap_vm_area(obj, da, vfree, IOVMF_DISCONT | IOVMF_ALLOC);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_vfree);
+
+static u32 __iommu_kmap(struct iommu *obj, u32 da, u32 pa, void *va,
+ size_t bytes, u32 flags)
+{
+ struct sg_table *sgt;
+
+ sgt = sgtable_alloc(bytes, flags);
+ if (IS_ERR(sgt))
+ return PTR_ERR(sgt);
+
+ sgtable_fill_kmalloc(sgt, pa, bytes);
+
+ da = map_iommu_region(obj, da, sgt, va, bytes, flags);
+ if (IS_ERR_VALUE(da)) {
+ sgtable_drain_kmalloc(sgt);
+ sgtable_free(sgt);
+ }
+
+ return da;
+}
+
+/**
+ * iommu_kmap - (d)-(p)-(v) address mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @pa: contiguous physical memory
+ * @flags: iovma and page property
+ *
+ * Creates 1-1-1 mapping and returns @da again, which can be
+ * adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmap(struct iommu *obj, u32 da, u32 pa, size_t bytes,
+ u32 flags)
+{
+ void *va;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = ioremap(pa, bytes);
+ if (!va)
+ return -ENOMEM;
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_LINEAR;
+ flags |= IOVMF_MMIO;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ iounmap(va);
+
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmap);
+
+/**
+ * iommu_kunmap - release virtual mapping obtained by 'iommu_kmap()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmap()'.
+ */
+void iommu_kunmap(struct iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+ typedef void (*func_t)(const void *);
+
+ sgt = unmap_vm_area(obj, da, (func_t)__iounmap,
+ IOVMF_LINEAR | IOVMF_MMIO);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kunmap);
+
+/**
+ * iommu_kmalloc - (d)-(p)-(v) address allocator and mapper
+ * @obj: objective iommu
+ * @da: contiguous iommu virtual memory
+ * @bytes: bytes for allocation
+ * @flags: iovma and page property
+ *
+ * Allocate @bytes linearly and creates 1-1-1 mapping and returns
+ * @da again, which might be adjusted if 'IOVMF_DA_ANON' is set.
+ */
+u32 iommu_kmalloc(struct iommu *obj, u32 da, size_t bytes, u32 flags)
+{
+ void *va;
+ u32 pa;
+
+ if (!obj || !obj->dev || !bytes)
+ return -EINVAL;
+
+ bytes = PAGE_ALIGN(bytes);
+
+ va = kmalloc(bytes, GFP_KERNEL | GFP_DMA);
+ if (!va)
+ return -ENOMEM;
+ pa = virt_to_phys(va);
+
+ flags &= IOVMF_HW_MASK;
+ flags |= IOVMF_LINEAR;
+ flags |= IOVMF_ALLOC;
+ flags |= (da ? IOVMF_DA_FIXED : IOVMF_DA_ANON);
+
+ da = __iommu_kmap(obj, da, pa, va, bytes, flags);
+ if (IS_ERR_VALUE(da))
+ kfree(va);
+
+ return da;
+}
+EXPORT_SYMBOL_GPL(iommu_kmalloc);
+
+/**
+ * iommu_kfree - release virtual mapping obtained by 'iommu_kmalloc()'
+ * @obj: objective iommu
+ * @da: iommu device virtual address
+ *
+ * Frees the iommu virtually contiguous memory area starting at
+ * @da, which was passed to and was returned by'iommu_kmalloc()'.
+ */
+void iommu_kfree(struct iommu *obj, u32 da)
+{
+ struct sg_table *sgt;
+
+ sgt = unmap_vm_area(obj, da, kfree, IOVMF_LINEAR | IOVMF_ALLOC);
+ if (!sgt)
+ dev_dbg(obj->dev, "%s: No sgt\n", __func__);
+ sgtable_free(sgt);
+}
+EXPORT_SYMBOL_GPL(iommu_kfree);
+
+
+static int __init iovmm_init(void)
+{
+ const unsigned long flags = SLAB_HWCACHE_ALIGN;
+ struct kmem_cache *p;
+
+ p = kmem_cache_create("iovm_area_cache", sizeof(struct iovm_struct), 0,
+ flags, NULL);
+ if (!p)
+ return -ENOMEM;
+ iovm_area_cachep = p;
+
+ return 0;
+}
+module_init(iovmm_init);
+
+static void __exit iovmm_exit(void)
+{
+ kmem_cache_destroy(iovm_area_cachep);
+}
+module_exit(iovmm_exit);
+
+MODULE_DESCRIPTION("omap iommu: simple virtual address space management");
+MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>");
+MODULE_LICENSE("GPL v2");
static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_tx = dev_id;
+ u16 irqst_spcr2;
- dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+ irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+ dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
- complete(&mcbsp_tx->tx_irq_completion);
+ if (irqst_spcr2 & XSYNC_ERR) {
+ dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
+ irqst_spcr2);
+ /* Writing zero to XSYNC_ERR clears the IRQ */
+ OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
+ irqst_spcr2 & ~(XSYNC_ERR));
+ } else {
+ complete(&mcbsp_tx->tx_irq_completion);
+ }
return IRQ_HANDLED;
}
static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
{
struct omap_mcbsp *mcbsp_rx = dev_id;
+ u16 irqst_spcr1;
- dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
- OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+ irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+ dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
- complete(&mcbsp_rx->rx_irq_completion);
+ if (irqst_spcr1 & RSYNC_ERR) {
+ dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
+ irqst_spcr1);
+ /* Writing zero to RSYNC_ERR clears the IRQ */
+ OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
+ irqst_spcr1 & ~(RSYNC_ERR));
+ } else {
+ complete(&mcbsp_rx->tx_irq_completion);
+ }
return IRQ_HANDLED;
}
{
struct pin_config *reg;
+ if (cpu_is_omap44xx())
+ return 0;
+
if (mux_cfg == NULL) {
printk(KERN_ERR "Pin mux table not initialized\n");
return -ENODEV;
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
#define OMAP1_SRAM_VA VMALLOC_END
#define OMAP2_SRAM_PA 0x40200000
#define OMAP2_SRAM_PUB_PA 0x4020f800
-#define OMAP2_SRAM_VA VMALLOC_END
-#define OMAP2_SRAM_PUB_VA (VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA 0xe3000000
+#define OMAP2_SRAM_PUB_VA (OMAP2_SRAM_VA + 0x800)
#define OMAP3_SRAM_PA 0x40200000
#define OMAP3_SRAM_VA 0xd7000000
#define OMAP3_SRAM_PUB_PA 0x40208000
#define OMAP3_SRAM_PUB_VA 0xd7008000
+#define OMAP4_SRAM_PA 0x40200000 /*0x402f0000*/
+#define OMAP4_SRAM_VA 0xd7000000 /*0xd70f0000*/
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
#define SRAM_BOOTLOADER_SZ 0x00
{
int type = 0;
+ if (cpu_is_omap44xx())
+ /* Not yet supported */
+ return 0;
+
if (cpu_is_omap242x())
type = omap_rev() & OMAP2_DEVICETYPE_MASK;
omap_sram_base = OMAP3_SRAM_VA;
omap_sram_start = OMAP3_SRAM_PA;
omap_sram_size = 0x10000; /* 64K */
+ } else if (cpu_is_omap44xx()) {
+ omap_sram_base = OMAP4_SRAM_VA;
+ omap_sram_start = OMAP4_SRAM_PA;
+ omap_sram_size = 0x8000; /* 32K */
} else {
omap_sram_base = OMAP2_SRAM_VA;
omap_sram_start = OMAP2_SRAM_PA;
base = OMAP3_SRAM_PA;
base = ROUND_DOWN(base, PAGE_SIZE);
omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+
+ /*
+ * SRAM must be marked as non-cached on OMAP3 since the
+ * CORE DPLL M2 divider change code (in SRAM) runs with the
+ * SDRAM controller disabled, and if it is marked cached,
+ * the ARM may attempt to write cache lines back to SDRAM
+ * which will cause the system to hang.
+ */
+ omap_sram_io_desc[0].type = MT_MEMORY_NONCACHED;
}
+ if (cpu_is_omap44xx()) {
+ omap_sram_io_desc[0].virtual = OMAP4_SRAM_VA;
+ base = OMAP4_SRAM_PA;
+ base = ROUND_DOWN(base, PAGE_SIZE);
+ omap_sram_io_desc[0].pfn = __phys_to_pfn(base);
+ }
omap_sram_io_desc[0].length = 1024 * 1024; /* Use section desc */
iotable_init(omap_sram_io_desc, ARRAY_SIZE(omap_sram_io_desc));
return (void *)omap_sram_ceil;
}
-static void omap_sram_error(void)
-{
- panic("Uninitialized SRAM function\n");
-}
-
#ifdef CONFIG_ARCH_OMAP1
static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
- if (!_omap_sram_reprogram_clock)
- omap_sram_error();
-
+ BUG_ON(!_omap_sram_reprogram_clock);
_omap_sram_reprogram_clock(dpllctl, ckctl);
}
void omap2_sram_ddr_init(u32 *slow_dll_ctrl, u32 fast_dll_ctrl,
u32 base_cs, u32 force_unlock)
{
- if (!_omap2_sram_ddr_init)
- omap_sram_error();
-
+ BUG_ON(!_omap2_sram_ddr_init);
_omap2_sram_ddr_init(slow_dll_ctrl, fast_dll_ctrl,
base_cs, force_unlock);
}
void omap2_sram_reprogram_sdrc(u32 perf_level, u32 dll_val, u32 mem_type)
{
- if (!_omap2_sram_reprogram_sdrc)
- omap_sram_error();
-
+ BUG_ON(!_omap2_sram_reprogram_sdrc);
_omap2_sram_reprogram_sdrc(perf_level, dll_val, mem_type);
}
u32 omap2_set_prcm(u32 dpll_ctrl_val, u32 sdrc_rfr_val, int bypass)
{
- if (!_omap2_set_prcm)
- omap_sram_error();
-
+ BUG_ON(!_omap2_set_prcm);
return _omap2_set_prcm(dpll_ctrl_val, sdrc_rfr_val, bypass);
}
#endif
static u32 (*_omap3_sram_configure_core_dpll)(u32 sdrc_rfr_ctrl,
u32 sdrc_actim_ctrla,
u32 sdrc_actim_ctrlb,
- u32 m2);
+ u32 m2, u32 unlock_dll);
u32 omap3_configure_core_dpll(u32 sdrc_rfr_ctrl, u32 sdrc_actim_ctrla,
- u32 sdrc_actim_ctrlb, u32 m2)
+ u32 sdrc_actim_ctrlb, u32 m2, u32 unlock_dll)
{
- if (!_omap3_sram_configure_core_dpll)
- omap_sram_error();
-
+ BUG_ON(!_omap3_sram_configure_core_dpll);
return _omap3_sram_configure_core_dpll(sdrc_rfr_ctrl,
sdrc_actim_ctrla,
- sdrc_actim_ctrlb, m2);
+ sdrc_actim_ctrlb, m2,
+ unlock_dll);
}
/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
omap243x_sram_init();
else if (cpu_is_omap34xx())
omap34xx_sram_init();
+ else if (cpu_is_omap44xx())
+ omap34xx_sram_init(); /* FIXME: */
return 0;
}
#include <linux/spinlock.h>
#include <linux/bitops.h>
#include <linux/io.h>
-#include <asm/gpio.h>
+#include <linux/gpio.h>
static DEFINE_SPINLOCK(gpio_lock);
-static const char *gpio_label[GPIO_MAX]; /* non null for allocated GPIOs */
static unsigned long gpio_valid_input[BITS_TO_LONGS(GPIO_MAX)];
static unsigned long gpio_valid_output[BITS_TO_LONGS(GPIO_MAX)];
writel(u, GPIO_OUT(pin));
}
-
-/*
- * GENERIC_GPIO primitives.
- */
-int gpio_direction_input(unsigned pin)
+static inline void __set_blinking(unsigned pin, int blink)
{
- unsigned long flags;
-
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_input)) {
- pr_debug("%s: invalid GPIO %d\n", __func__, pin);
- return -EINVAL;
- }
-
- spin_lock_irqsave(&gpio_lock, flags);
-
- /*
- * Some callers might not have used gpio_request(),
- * so flag this pin as requested now.
- */
- if (gpio_label[pin] == NULL)
- gpio_label[pin] = "?";
+ u32 u;
- /*
- * Configure GPIO direction.
- */
- __set_direction(pin, 1);
+ u = readl(GPIO_BLINK_EN(pin));
+ if (blink)
+ u |= 1 << (pin & 31);
+ else
+ u &= ~(1 << (pin & 31));
+ writel(u, GPIO_BLINK_EN(pin));
+}
- spin_unlock_irqrestore(&gpio_lock, flags);
+static inline int orion_gpio_is_valid(unsigned pin, int mode)
+{
+ if (pin < GPIO_MAX) {
+ if ((mode & GPIO_INPUT_OK) && !test_bit(pin, gpio_valid_input))
+ goto err_out;
+ if ((mode & GPIO_OUTPUT_OK) && !test_bit(pin, gpio_valid_output))
+ goto err_out;
+ return true;
+ }
- return 0;
+err_out:
+ pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+ return false;
}
-EXPORT_SYMBOL(gpio_direction_input);
-int gpio_direction_output(unsigned pin, int value)
+/*
+ * GENERIC_GPIO primitives.
+ */
+static int orion_gpio_direction_input(struct gpio_chip *chip, unsigned pin)
{
unsigned long flags;
- u32 u;
- if (pin >= GPIO_MAX || !test_bit(pin, gpio_valid_output)) {
- pr_debug("%s: invalid GPIO %d\n", __func__, pin);
+ if (!orion_gpio_is_valid(pin, GPIO_INPUT_OK))
return -EINVAL;
- }
spin_lock_irqsave(&gpio_lock, flags);
- /*
- * Some callers might not have used gpio_request(),
- * so flag this pin as requested now.
- */
- if (gpio_label[pin] == NULL)
- gpio_label[pin] = "?";
-
- /*
- * Disable blinking.
- */
- u = readl(GPIO_BLINK_EN(pin));
- u &= ~(1 << (pin & 31));
- writel(u, GPIO_BLINK_EN(pin));
-
- /*
- * Configure GPIO output value.
- */
- __set_level(pin, value);
-
- /*
- * Configure GPIO direction.
- */
- __set_direction(pin, 0);
+ /* Configure GPIO direction. */
+ __set_direction(pin, 1);
spin_unlock_irqrestore(&gpio_lock, flags);
return 0;
}
-EXPORT_SYMBOL(gpio_direction_output);
-int gpio_get_value(unsigned pin)
+static int orion_gpio_get_value(struct gpio_chip *chip, unsigned pin)
{
int val;
return (val >> (pin & 31)) & 1;
}
-EXPORT_SYMBOL(gpio_get_value);
-void gpio_set_value(unsigned pin, int value)
+static int orion_gpio_direction_output(struct gpio_chip *chip, unsigned pin,
+ int value)
{
unsigned long flags;
- u32 u;
+
+ if (!orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+ return -EINVAL;
spin_lock_irqsave(&gpio_lock, flags);
- /*
- * Disable blinking.
- */
- u = readl(GPIO_BLINK_EN(pin));
- u &= ~(1 << (pin & 31));
- writel(u, GPIO_BLINK_EN(pin));
+ /* Disable blinking. */
+ __set_blinking(pin, 0);
- /*
- * Configure GPIO output value.
- */
+ /* Configure GPIO output value. */
__set_level(pin, value);
+ /* Configure GPIO direction. */
+ __set_direction(pin, 0);
+
spin_unlock_irqrestore(&gpio_lock, flags);
+
+ return 0;
}
-EXPORT_SYMBOL(gpio_set_value);
-int gpio_request(unsigned pin, const char *label)
+static void orion_gpio_set_value(struct gpio_chip *chip, unsigned pin,
+ int value)
{
unsigned long flags;
- int ret;
-
- if (pin >= GPIO_MAX ||
- !(test_bit(pin, gpio_valid_input) ||
- test_bit(pin, gpio_valid_output))) {
- pr_debug("%s: invalid GPIO %d\n", __func__, pin);
- return -EINVAL;
- }
spin_lock_irqsave(&gpio_lock, flags);
- if (gpio_label[pin] == NULL) {
- gpio_label[pin] = label ? label : "?";
- ret = 0;
- } else {
- pr_debug("%s: GPIO %d already used as %s\n",
- __func__, pin, gpio_label[pin]);
- ret = -EBUSY;
- }
- spin_unlock_irqrestore(&gpio_lock, flags);
- return ret;
+ /* Configure GPIO output value. */
+ __set_level(pin, value);
+
+ spin_unlock_irqrestore(&gpio_lock, flags);
}
-EXPORT_SYMBOL(gpio_request);
-void gpio_free(unsigned pin)
+static int orion_gpio_request(struct gpio_chip *chip, unsigned pin)
{
- if (pin >= GPIO_MAX ||
- !(test_bit(pin, gpio_valid_input) ||
- test_bit(pin, gpio_valid_output))) {
- pr_debug("%s: invalid GPIO %d\n", __func__, pin);
- return;
- }
-
- if (gpio_label[pin] == NULL)
- pr_warning("%s: GPIO %d already freed\n", __func__, pin);
- else
- gpio_label[pin] = NULL;
+ if (orion_gpio_is_valid(pin, GPIO_INPUT_OK) ||
+ orion_gpio_is_valid(pin, GPIO_OUTPUT_OK))
+ return 0;
+ return -EINVAL;
}
-EXPORT_SYMBOL(gpio_free);
+static struct gpio_chip orion_gpiochip = {
+ .label = "orion_gpio",
+ .direction_input = orion_gpio_direction_input,
+ .get = orion_gpio_get_value,
+ .direction_output = orion_gpio_direction_output,
+ .set = orion_gpio_set_value,
+ .request = orion_gpio_request,
+ .base = 0,
+ .ngpio = GPIO_MAX,
+ .can_sleep = 0,
+};
+
+void __init orion_gpio_init(void)
+{
+ gpiochip_add(&orion_gpiochip);
+}
/*
* Orion-specific GPIO API extensions.
*/
void __init orion_gpio_set_unused(unsigned pin)
{
- /*
- * Configure as output, drive low.
- */
+ /* Configure as output, drive low. */
__set_level(pin, 0);
__set_direction(pin, 0);
}
void orion_gpio_set_blink(unsigned pin, int blink)
{
unsigned long flags;
- u32 u;
spin_lock_irqsave(&gpio_lock, flags);
- /*
- * Set output value to zero.
- */
+ /* Set output value to zero. */
__set_level(pin, 0);
- u = readl(GPIO_BLINK_EN(pin));
- if (blink)
- u |= 1 << (pin & 31);
- else
- u &= ~(1 << (pin & 31));
- writel(u, GPIO_BLINK_EN(pin));
+ /* Set blinking. */
+ __set_blinking(pin, blink);
spin_unlock_irqrestore(&gpio_lock, flags);
}
}
struct irq_chip orion_gpio_irq_chip = {
- .name = "orion_gpio",
+ .name = "orion_gpio_irq",
.ack = gpio_irq_ack,
.mask = gpio_irq_mask,
.unmask = gpio_irq_unmask,
/*
* GENERIC_GPIO primitives.
*/
-int gpio_request(unsigned pin, const char *label);
-void gpio_free(unsigned pin);
-int gpio_direction_input(unsigned pin);
-int gpio_direction_output(unsigned pin, int value);
-int gpio_get_value(unsigned pin);
-void gpio_set_value(unsigned pin, int value);
+#define gpio_get_value __gpio_get_value
+#define gpio_set_value __gpio_set_value
+#define gpio_cansleep __gpio_cansleep
/*
* Orion-specific GPIO API extensions.
void orion_gpio_set_unused(unsigned pin);
void orion_gpio_set_blink(unsigned pin, int blink);
-#define GPIO_BIDI_OK (1 << 0)
-#define GPIO_INPUT_OK (1 << 1)
-#define GPIO_OUTPUT_OK (1 << 2)
+#define GPIO_INPUT_OK (1 << 0)
+#define GPIO_OUTPUT_OK (1 << 1)
void orion_gpio_set_valid(unsigned pin, int mode);
+/* Initialize gpiolib. */
+void __init orion_gpio_init(void);
+
/*
* GPIO interrupt handling.
*/
/*
- * arch/arm/plat-orion/include/plat/orion5x_wdt.h
+ * arch/arm/plat-orion/include/plat/orion_wdt.h
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#ifndef __PLAT_ORION5X_WDT_H
-#define __PLAT_ORION5X_WDT_H
+#ifndef __PLAT_ORION_WDT_H
+#define __PLAT_ORION_WDT_H
-struct orion5x_wdt_platform_data {
+struct orion_wdt_platform_data {
u32 tclk; /* no <linux/clk.h> support yet */
};
*/
#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
+#include <linux/timer.h>
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
#include <mach/bridge-regs.h>
+#include <mach/hardware.h>
/*
* Number of timer ticks per jiffy.
#define TIMER1_VAL (TIMER_VIRT_BASE + 0x001c)
+/*
+ * Orion's sched_clock implementation. It has a resolution of
+ * at least 7.5ns (133MHz TCLK) and a maximum value of 834 days.
+ *
+ * Because the hardware timer period is quite short (21 secs if
+ * 200MHz TCLK) and because cnt32_to_63() needs to be called at
+ * least once per half period to work properly, a kernel timer is
+ * set up to ensure this requirement is always met.
+ */
+#define TCLK2NS_SCALE_FACTOR 8
+
+static unsigned long tclk2ns_scale;
+
+unsigned long long sched_clock(void)
+{
+ unsigned long long v = cnt32_to_63(0xffffffff - readl(TIMER0_VAL));
+ return (v * tclk2ns_scale) >> TCLK2NS_SCALE_FACTOR;
+}
+
+static struct timer_list cnt32_to_63_keepwarm_timer;
+
+static void cnt32_to_63_keepwarm(unsigned long data)
+{
+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+ (void) sched_clock();
+}
+
+static void __init setup_sched_clock(unsigned long tclk)
+{
+ unsigned long long v;
+ unsigned long data;
+
+ v = NSEC_PER_SEC;
+ v <<= TCLK2NS_SCALE_FACTOR;
+ v += tclk/2;
+ do_div(v, tclk);
+ /*
+ * We want an even value to automatically clear the top bit
+ * returned by cnt32_to_63() without an additional run time
+ * instruction. So if the LSB is 1 then round it up.
+ */
+ if (v & 1)
+ v++;
+ tclk2ns_scale = v;
+
+ data = (0xffffffffUL / tclk / 2 - 2) * HZ;
+ setup_timer(&cnt32_to_63_keepwarm_timer, cnt32_to_63_keepwarm, data);
+ mod_timer(&cnt32_to_63_keepwarm_timer, round_jiffies(jiffies + data));
+}
+
/*
* Clocksource handling.
*/
ticks_per_jiffy = (tclk + HZ/2) / HZ;
+ /*
+ * Set scale and timer for sched_clock
+ */
+ setup_sched_clock(tclk);
/*
* Setup free-running clocksource timer (interrupts
orion_clksrc.mult = clocksource_hz2mult(tclk, orion_clksrc.shift);
clocksource_register(&orion_clksrc);
-
/*
* Setup clockevent timer (interrupt-driven.)
*/
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
+config S3C_PM_DEBUG_LED_SMDK
+ bool "SMDK LED suspend/resume debugging"
+ depends on PM && (MACH_SMDK6410)
+ help
+ Say Y here to enable the use of the SMDK LEDs on the baseboard
+ for debugging of the state of the suspend and resume process.
+
+ Note, this currently only works for S3C64XX based SMDK boards.
+
config S3C2410_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
depends on PM && CRC32
Internal configuration to enable S3C64XX style GPIO configuration
functions.
+# DMA
+
+config S3C_DMA
+ bool
+ help
+ Internal configuration for S3C DMA core
+
# device definitions to compile in
config S3C_DEV_HSMMC
help
Compile in platform device definition for framebuffer
+config S3C_DEV_USB_HOST
+ bool
+ help
+ Compile in platform device definition for USB host.
+
+config S3C_DEV_USB_HSOTG
+ bool
+ help
+ Compile in platform device definition for USB high-speed OtG
+
endif
obj-y += gpio.o
obj-y += gpio-config.o
+# DMA support
+
+obj-$(CONFIG_S3C_DMA) += dma.o
+
# PM support
obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += pm-gpio.o
obj-$(CONFIG_S3C2410_PM_CHECK) += pm-check.o
# devices
obj-y += dev-i2c0.o
obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o
obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
+obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
+obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
--- /dev/null
+/* linux/arch/arm/plat-s3c/dev-usb-hsotg.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB high-speed UDC/OtG block
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+static struct resource s3c_usb_hsotg_resources[] = {
+ [0] = {
+ .start = S3C_PA_USB_HSOTG,
+ .end = S3C_PA_USB_HSOTG + 0x10000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_OTG,
+ .end = IRQ_OTG,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_usb_hsotg = {
+ .name = "s3c-hsotg",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usb_hsotg_resources),
+ .resource = s3c_usb_hsotg_resources,
+};
--- /dev/null
+/* linux/arch/arm/plat-s3c/dev-usb.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series device definition for USB host
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/platform_device.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+
+static struct resource s3c_usb_resource[] = {
+ [0] = {
+ .start = S3C_PA_USBHOST,
+ .end = S3C_PA_USBHOST + 0x100 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_USBH,
+ .end = IRQ_USBH,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static u64 s3c_device_usb_dmamask = 0xffffffffUL;
+
+struct platform_device s3c_device_usb = {
+ .name = "s3c2410-ohci",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s3c_usb_resource),
+ .resource = s3c_usb_resource,
+ .dev = {
+ .dma_mask = &s3c_device_usb_dmamask,
+ .coherent_dma_mask = 0xffffffffUL
+ }
+};
+
+EXPORT_SYMBOL(s3c_device_usb);
--- /dev/null
+/* linux/arch/arm/plat-s3c/dma.c
+ *
+ * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct s3c2410_dma_buf;
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+
+#include <mach/dma.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+
+/* dma channel state information */
+struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
+struct s3c2410_dma_chan *s3c_dma_chan_map[DMACH_MAX];
+
+/* s3c_dma_lookup_channel
+ *
+ * change the dma channel number given into a real dma channel id
+*/
+
+struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel)
+{
+ if (channel & DMACH_LOW_LEVEL)
+ return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
+ else
+ return s3c_dma_chan_map[channel];
+}
+
+/* do we need to protect the settings of the fields from
+ * irq?
+*/
+
+int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
+
+ chan->op_fn = rtn;
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_opfn);
+
+int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
+
+ chan->callback_fn = rtn;
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
+
+int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ chan->flags = flags;
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_setflags);
#include <linux/io.h>
#include <linux/gpio.h>
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
#ifdef CONFIG_S3C_GPIO_TRACK
struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END];
if (!gc->get)
gc->get = s3c_gpiolib_get;
+#ifdef CONFIG_PM
+ if (chip->pm != NULL) {
+ if (!chip->pm->save || !chip->pm->resume)
+ printk(KERN_ERR "gpio: %s has missing PM functions\n",
+ gc->label);
+ } else
+ printk(KERN_ERR "gpio: %s has no PM function\n", gc->label);
+#endif
+
/* gpiochip_add() prints own failure message on error. */
ret = gpiochip_add(gc);
if (ret >= 0)
extern int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples);
-extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned selected),
- void (*conv)(unsigned d0, unsigned d1),
- unsigned int is_ts);
+extern struct s3c_adc_client *
+ s3c_adc_register(struct platform_device *pdev,
+ void (*select)(unsigned selected),
+ void (*conv)(unsigned d0, unsigned d1,
+ unsigned *samples_left),
+ unsigned int is_ts);
extern void s3c_adc_release(struct s3c_adc_client *client);
extern struct clk clk_ext;
/* S3C64XX specific clocks */
+extern struct clk clk_h2;
extern struct clk clk_27m;
extern struct clk clk_48m;
extern struct sysdev_class s3c2440_sysclass;
extern struct sysdev_class s3c2442_sysclass;
extern struct sysdev_class s3c2443_sysclass;
+extern struct sysdev_class s3c6410_sysclass;
+extern struct sysdev_class s3c64xx_sysclass;
+
extern struct platform_device s3c_device_nand;
extern struct platform_device s3c_device_usbgadget;
+extern struct platform_device s3c_device_usb_hsotg;
/* s3c2440 specific devices */
--- /dev/null
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * Samsung S3C DMA core support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct s3c2410_dma_chan *s3c_dma_lookup_channel(unsigned int channel);
+
+extern struct s3c2410_dma_chan *s3c_dma_chan_map[];
+
+/* the currently allocated channel information */
+extern struct s3c2410_dma_chan s3c2410_chans[];
+
+
--- /dev/null
+/* arch/arm/plat-s3c/include/plat/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c2410_dma_buffresult {
+ S3C2410_RES_OK,
+ S3C2410_RES_ERR,
+ S3C2410_RES_ABORT
+};
+
+enum s3c2410_dmasrc {
+ S3C2410_DMASRC_HW, /* source is memory */
+ S3C2410_DMASRC_MEM /* source is hardware */
+};
+
+/* enum s3c2410_chan_op
+ *
+ * operation codes passed to the DMA code by the user, and also used
+ * to inform the current channel owner of any changes to the system state
+*/
+
+enum s3c2410_chan_op {
+ S3C2410_DMAOP_START,
+ S3C2410_DMAOP_STOP,
+ S3C2410_DMAOP_PAUSE,
+ S3C2410_DMAOP_RESUME,
+ S3C2410_DMAOP_FLUSH,
+ S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */
+ S3C2410_DMAOP_STARTED, /* indicate channel started */
+};
+
+struct s3c2410_dma_client {
+ char *name;
+};
+
+struct s3c2410_dma_chan;
+
+/* s3c2410_dma_cbfn_t
+ *
+ * buffer callback routine type
+*/
+
+typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *,
+ void *buf, int size,
+ enum s3c2410_dma_buffresult result);
+
+typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *,
+ enum s3c2410_chan_op );
+
+
+
+/* s3c2410_dma_request
+ *
+ * request a dma channel exclusivley
+*/
+
+extern int s3c2410_dma_request(unsigned int channel,
+ struct s3c2410_dma_client *, void *dev);
+
+
+/* s3c2410_dma_ctrl
+ *
+ * change the state of the dma channel
+*/
+
+extern int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op);
+
+/* s3c2410_dma_setflags
+ *
+ * set the channel's flags to a given state
+*/
+
+extern int s3c2410_dma_setflags(unsigned int channel,
+ unsigned int flags);
+
+/* s3c2410_dma_free
+ *
+ * free the dma channel (will also abort any outstanding operations)
+*/
+
+extern int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *);
+
+/* s3c2410_dma_enqueue
+ *
+ * place the given buffer onto the queue of operations for the channel.
+ * The buffer must be allocated from dma coherent memory, or the Dcache/WB
+ * drained before the buffer is given to the DMA system.
+*/
+
+extern int s3c2410_dma_enqueue(unsigned int channel, void *id,
+ dma_addr_t data, int size);
+
+/* s3c2410_dma_config
+ *
+ * configure the dma channel
+*/
+
+extern int s3c2410_dma_config(unsigned int channel, int xferunit);
+
+/* s3c2410_dma_devconfig
+ *
+ * configure the device we're talking to
+*/
+
+extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source,
+ unsigned long devaddr);
+
+/* s3c2410_dma_getposition
+ *
+ * get the position that the dma transfer is currently at
+*/
+
+extern int s3c2410_dma_getposition(unsigned int channel,
+ dma_addr_t *src, dma_addr_t *dest);
+
+extern int s3c2410_dma_set_opfn(unsigned int, s3c2410_dma_opfn_t rtn);
+extern int s3c2410_dma_set_buffdone_fn(unsigned int, s3c2410_dma_cbfn_t rtn);
+
+
* specific code.
*/
+struct s3c_gpio_chip;
+
+/**
+ * struct s3c_gpio_pm - power management (suspend/resume) information
+ * @save: Routine to save the state of the GPIO block
+ * @resume: Routine to resume the GPIO block.
+ */
+struct s3c_gpio_pm {
+ void (*save)(struct s3c_gpio_chip *chip);
+ void (*resume)(struct s3c_gpio_chip *chip);
+};
+
struct s3c_gpio_cfg;
/**
* @chip: The chip structure to be exported via gpiolib.
* @base: The base pointer to the gpio configuration registers.
* @config: special function and pull-resistor control information.
+ * @pm_save: Save information for suspend/resume support.
*
* This wrapper provides the necessary information for the Samsung
* specific gpios being registered with gpiolib.
struct s3c_gpio_chip {
struct gpio_chip chip;
struct s3c_gpio_cfg *config;
+ struct s3c_gpio_pm *pm;
void __iomem *base;
+#ifdef CONFIG_PM
+ u32 pm_save[4];
+#endif
};
static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc)
static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { }
#endif
+
+#ifdef CONFIG_PM
+extern struct s3c_gpio_pm s3c_gpio_pm_1bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_2bit;
+extern struct s3c_gpio_pm s3c_gpio_pm_4bit;
+#define __gpio_pm(x) x
+#else
+#define s3c_gpio_pm_1bit NULL
+#define s3c_gpio_pm_2bit NULL
+#define s3c_gpio_pm_4bit NULL
+#define __gpio_pm(x) NULL
+
+#endif /* CONFIG_PM */
extern unsigned long s3c_pm_flags;
+extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
+
/* from sleep.S */
extern int s3c_cpu_save(unsigned long *saveblk);
u32 ufcon;
u32 umcon;
u32 ubrdiv;
+ u32 udivslot;
};
/* helper functions to save/restore lists of registers. */
#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
#endif
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+/**
+ * s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
+ * @set: set bits for the state of the LEDs
+ * @clear: clear bits for the state of the LEDs.
+ */
+extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
+
+#else
+static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
+#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
+
/* suspend memory checking */
#ifdef CONFIG_S3C2410_PM_CHECK
#define S3C2443_DIVSLOT (0x2C)
+/* S3C64XX interrupt registers. */
+#define S3C64XX_UINTP 0x30
+#define S3C64XX_UINTSP 0x34
+#define S3C64XX_UINTM 0x38
+
#ifndef __ASSEMBLY__
/* struct s3c24xx_uart_clksrc
/* Helper function availablity */
+extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+
+/* S3C6400 SDHCI setup */
+
+#ifdef CONFIG_S3C6400_SETUP_SDHCI
+extern char *s3c6400_hsmmc_clksrcs[4];
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
+ void __iomem *r,
+ struct mmc_ios *ios,
+ struct mmc_card *card);
+
+static inline void s3c6400_default_sdhci0(void)
+{
+ s3c_hsmmc0_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s3c6400_default_sdhci1(void)
+{
+ s3c_hsmmc1_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#else
+static inline void s3c6400_default_sdhci0(void) { }
+static inline void s3c6400_default_sdhci1(void) { }
+#endif /* CONFIG_S3C6400_SETUP_SDHCI */
+
+/* S3C6410 SDHCI setup */
+
#ifdef CONFIG_S3C6410_SETUP_SDHCI
extern char *s3c6410_hsmmc_clksrcs[4];
-extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
-extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
-
extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev,
void __iomem *r,
struct mmc_ios *ios,
static inline void s3c6410_default_sdhci0(void)
{
s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
- s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio;
+ s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio;
s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
}
#else
static inline void s3c6410_default_sdhci1(void)
{
s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
- s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio;
+ s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio;
s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
}
#else
--- /dev/null
+/* arch/arm/plat-s3c/include/plat/udc-hs.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C USB2.0 High-speed / OtG platform information
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+enum s3c_hostg_dmamode {
+ S3C_HSOTG_DMA_NONE, /* do not use DMA at-all */
+ S3C_HSOTG_DMA_ONLY, /* always use DMA */
+ S3C_HSOTG_DMA_DRV, /* DMA is chosen by driver */
+};
+
+/**
+ * struct s3c_hsotg_plat - platform data for high-speed otg/udc
+ * @dma: Whether to use DMA or not.
+ * @is_osc: The clock source is an oscillator, not a crystal
+ */
+struct s3c_hsotg_plat {
+ enum s3c_hostg_dmamode dma;
+ unsigned int is_osc : 1;
+};
--- /dev/null
+/* arch/arm/plat-s3c/include/plat/watchdog-reset.h
+ *
+ * Copyright (c) 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C2410 - System define for arch_reset() function
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <plat/regs-watchdog.h>
+#include <mach/map.h>
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+static inline void arch_wdt_reset(void)
+{
+ struct clk *wdtclk;
+
+ printk("arch_reset: attempting watchdog reset\n");
+
+ __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */
+
+ wdtclk = clk_get(NULL, "watchdog");
+ if (!IS_ERR(wdtclk)) {
+ clk_enable(wdtclk);
+ } else
+ printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__);
+
+ /* put initial values into count and data */
+ __raw_writel(0x80, S3C2410_WTCNT);
+ __raw_writel(0x80, S3C2410_WTDAT);
+
+ /* set the watchdog to go and reset... */
+ __raw_writel(S3C2410_WTCON_ENABLE|S3C2410_WTCON_DIV16|S3C2410_WTCON_RSTEN |
+ S3C2410_WTCON_PRESCALE(0x20), S3C2410_WTCON);
+
+ /* wait for reset to assert... */
+ mdelay(500);
+
+ printk(KERN_ERR "Watchdog reset failed to assert reset\n");
+
+ /* delay to allow the serial port to show the message */
+ mdelay(50);
+}
--- /dev/null
+
+/* linux/arch/arm/plat-s3c/pm-gpio.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C series GPIO PM code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/gpio-core.h>
+#include <plat/pm.h>
+
+/* PM GPIO helpers */
+
+#define OFFS_CON (0x00)
+#define OFFS_DAT (0x04)
+#define OFFS_UP (0x08)
+
+static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip)
+{
+ chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+ chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+}
+
+static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip)
+{
+ void __iomem *base = chip->base;
+ u32 old_gpcon = __raw_readl(base + OFFS_CON);
+ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+ u32 gps_gpcon = chip->pm_save[0];
+ u32 gps_gpdat = chip->pm_save[1];
+ u32 gpcon;
+
+ /* GPACON only has one bit per control / data and no PULLUPs.
+ * GPACON[x] = 0 => Output, 1 => SFN */
+
+ /* first set all SFN bits to SFN */
+
+ gpcon = old_gpcon | gps_gpcon;
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* now set all the other bits */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+
+ S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_1bit = {
+ .save = s3c_gpio_pm_1bit_save,
+ .resume = s3c_gpio_pm_1bit_resume,
+};
+
+static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip)
+{
+ chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON);
+ chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT);
+ chip->pm_save[2] = __raw_readl(chip->base + OFFS_UP);
+}
+
+/* Test whether the given masked+shifted bits of an GPIO configuration
+ * are one of the SFN (special function) modes. */
+
+static inline int is_sfn(unsigned long con)
+{
+ return con >= 2;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an input */
+
+static inline int is_in(unsigned long con)
+{
+ return con == 0;
+}
+
+/* Test if the given masked+shifted GPIO configuration is an output */
+
+static inline int is_out(unsigned long con)
+{
+ return con == 1;
+}
+
+/**
+ * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank
+ * @chip: The chip information to resume.
+ *
+ * Restore one of the GPIO banks that was saved during suspend. This is
+ * not as simple as once thought, due to the possibility of glitches
+ * from the order that the CON and DAT registers are set in.
+ *
+ * The three states the pin can be are {IN,OUT,SFN} which gives us 9
+ * combinations of changes to check. Three of these, if the pin stays
+ * in the same configuration can be discounted. This leaves us with
+ * the following:
+ *
+ * { IN => OUT } Change DAT first
+ * { IN => SFN } Change CON first
+ * { OUT => SFN } Change CON first, so new data will not glitch
+ * { OUT => IN } Change CON first, so new data will not glitch
+ * { SFN => IN } Change CON first
+ * { SFN => OUT } Change DAT first, so new data will not glitch [1]
+ *
+ * We do not currently deal with the UP registers as these control
+ * weak resistors, so a small delay in change should not need to bring
+ * these into the calculations.
+ *
+ * [1] this assumes that writing to a pin DAT whilst in SFN will set the
+ * state for when it is next output.
+ */
+static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip)
+{
+ void __iomem *base = chip->base;
+ u32 old_gpcon = __raw_readl(base + OFFS_CON);
+ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+ u32 gps_gpcon = chip->pm_save[0];
+ u32 gps_gpdat = chip->pm_save[1];
+ u32 gpcon, old, new, mask;
+ u32 change_mask = 0x0;
+ int nr;
+
+ /* restore GPIO pull-up settings */
+ __raw_writel(chip->pm_save[2], base + OFFS_UP);
+
+ /* Create a change_mask of all the items that need to have
+ * their CON value changed before their DAT value, so that
+ * we minimise the work between the two settings.
+ */
+
+ for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+
+ /* Write the new CON settings */
+
+ gpcon = old_gpcon & ~change_mask;
+ gpcon |= gps_gpcon & change_mask;
+
+ __raw_writel(gpcon, base + OFFS_CON);
+
+ /* Now change any items that require DAT,CON */
+
+ __raw_writel(gps_gpdat, base + OFFS_DAT);
+ __raw_writel(gps_gpcon, base + OFFS_CON);
+
+ S3C_PMDBG("%s: CON %08x => %08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_2bit = {
+ .save = s3c_gpio_pm_2bit_save,
+ .resume = s3c_gpio_pm_2bit_resume,
+};
+
+#ifdef CONFIG_ARCH_S3C64XX
+static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip)
+{
+ chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
+ chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT);
+ chip->pm_save[3] = __raw_readl(chip->base + OFFS_UP);
+
+ if (chip->chip.ngpio > 8)
+ chip->pm_save[0] = __raw_readl(chip->base - 4);
+}
+
+static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon)
+{
+ u32 old, new, mask;
+ u32 change_mask = 0x0;
+ int nr;
+
+ for (nr = 0, mask = 0x0f; nr < 16; nr += 4, mask <<= 4) {
+ old = (old_gpcon & mask) >> nr;
+ new = (gps_gpcon & mask) >> nr;
+
+ /* If there is no change, then skip */
+
+ if (old == new)
+ continue;
+
+ /* If both are special function, then skip */
+
+ if (is_sfn(old) && is_sfn(new))
+ continue;
+
+ /* Change is IN => OUT, do not change now */
+
+ if (is_in(old) && is_out(new))
+ continue;
+
+ /* Change is SFN => OUT, do not change now */
+
+ if (is_sfn(old) && is_out(new))
+ continue;
+
+ /* We should now be at the case of IN=>SFN,
+ * OUT=>SFN, OUT=>IN, SFN=>IN. */
+
+ change_mask |= mask;
+ }
+
+ return change_mask;
+}
+
+static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index)
+{
+ void __iomem *con = chip->base + (index * 4);
+ u32 old_gpcon = __raw_readl(con);
+ u32 gps_gpcon = chip->pm_save[index + 1];
+ u32 gpcon, mask;
+
+ mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon);
+
+ gpcon = old_gpcon & ~mask;
+ gpcon |= gps_gpcon & mask;
+
+ __raw_writel(gpcon, con);
+}
+
+static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip)
+{
+ void __iomem *base = chip->base;
+ u32 old_gpcon[2];
+ u32 old_gpdat = __raw_readl(base + OFFS_DAT);
+ u32 gps_gpdat = chip->pm_save[2];
+
+ /* First, modify the CON settings */
+
+ old_gpcon[0] = 0;
+ old_gpcon[1] = __raw_readl(base + OFFS_CON);
+
+ s3c_gpio_pm_4bit_con(chip, 0);
+ if (chip->chip.ngpio > 8) {
+ old_gpcon[0] = __raw_readl(base - 4);
+ s3c_gpio_pm_4bit_con(chip, -1);
+ }
+
+ /* Now change the configurations that require DAT,CON */
+
+ __raw_writel(chip->pm_save[2], base + OFFS_DAT);
+ __raw_writel(chip->pm_save[1], base + OFFS_CON);
+ if (chip->chip.ngpio > 8)
+ __raw_writel(chip->pm_save[0], base - 4);
+
+ __raw_writel(chip->pm_save[2], base + OFFS_DAT);
+ __raw_writel(chip->pm_save[3], base + OFFS_UP);
+
+ if (chip->chip.ngpio > 8) {
+ S3C_PMDBG("%s: CON4 %08x,%08x => %08x,%08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon[0], old_gpcon[1],
+ __raw_readl(base - 4),
+ __raw_readl(base + OFFS_CON),
+ old_gpdat, gps_gpdat);
+ } else
+ S3C_PMDBG("%s: CON4 %08x => %08x, DAT %08x => %08x\n",
+ chip->chip.label, old_gpcon[1],
+ __raw_readl(base + OFFS_CON),
+ old_gpdat, gps_gpdat);
+}
+
+struct s3c_gpio_pm s3c_gpio_pm_4bit = {
+ .save = s3c_gpio_pm_4bit_save,
+ .resume = s3c_gpio_pm_4bit_resume,
+};
+#endif /* CONFIG_ARCH_S3C64XX */
+
+/**
+ * s3c_pm_save_gpio() - save gpio chip data for suspend
+ * @ourchip: The chip for suspend.
+ */
+static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip)
+{
+ struct s3c_gpio_pm *pm = ourchip->pm;
+
+ if (pm == NULL || pm->save == NULL)
+ S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+ else
+ pm->save(ourchip);
+}
+
+/**
+ * s3c_pm_save_gpios() - Save the state of the GPIO banks.
+ *
+ * For all the GPIO banks, save the state of each one ready for going
+ * into a suspend mode.
+ */
+void s3c_pm_save_gpios(void)
+{
+ struct s3c_gpio_chip *ourchip;
+ unsigned int gpio_nr;
+
+ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+ ourchip = s3c_gpiolib_getchip(gpio_nr);
+ if (!ourchip)
+ continue;
+
+ s3c_pm_save_gpio(ourchip);
+
+ S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n",
+ ourchip->chip.label,
+ ourchip->pm_save[0],
+ ourchip->pm_save[1],
+ ourchip->pm_save[2],
+ ourchip->pm_save[3]);
+
+ gpio_nr += ourchip->chip.ngpio;
+ gpio_nr += CONFIG_S3C_GPIO_SPACE;
+ }
+}
+
+/**
+ * s3c_pm_resume_gpio() - restore gpio chip data after suspend
+ * @ourchip: The suspended chip.
+ */
+static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip)
+{
+ struct s3c_gpio_pm *pm = ourchip->pm;
+
+ if (pm == NULL || pm->resume == NULL)
+ S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label);
+ else
+ pm->resume(ourchip);
+}
+
+void s3c_pm_restore_gpios(void)
+{
+ struct s3c_gpio_chip *ourchip;
+ unsigned int gpio_nr;
+
+ for (gpio_nr = 0; gpio_nr < S3C_GPIO_END; gpio_nr++) {
+ ourchip = s3c_gpiolib_getchip(gpio_nr);
+ if (!ourchip)
+ continue;
+
+ s3c_pm_resume_gpio(ourchip);
+
+ gpio_nr += ourchip->chip.ngpio;
+ gpio_nr += CONFIG_S3C_GPIO_SPACE;
+ }
+}
#include <asm/cacheflush.h>
#include <mach/hardware.h>
+#include <mach/map.h>
#include <plat/regs-serial.h>
#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-mem.h>
#include <mach/regs-irq.h>
#include <asm/irq.h>
/* Save the UART configurations if we are configured for debug. */
+unsigned char pm_uart_udivslot;
+
#ifdef CONFIG_S3C2410_PM_DEBUG
struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
save->ufcon = __raw_readl(regs + S3C2410_UFCON);
save->umcon = __raw_readl(regs + S3C2410_UMCON);
save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
+
+ if (pm_uart_udivslot)
+ save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
+
+ S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
+ uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
}
static void s3c_pm_save_uarts(void)
{
void __iomem *regs = S3C_VA_UARTx(uart);
+ s3c_pm_arch_update_uart(regs, save);
+
__raw_writel(save->ulcon, regs + S3C2410_ULCON);
__raw_writel(save->ucon, regs + S3C2410_UCON);
__raw_writel(save->ufcon, regs + S3C2410_UFCON);
__raw_writel(save->umcon, regs + S3C2410_UMCON);
__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
+
+ if (pm_uart_udivslot)
+ __raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
}
static void s3c_pm_restore_uarts(void)
S3C_PMDBG("%s: post sleep, preparing to return\n", __func__);
+ /* LEDs should now be 1110 */
+ s3c_pm_debug_smdkled(1 << 1, 0);
+
s3c_pm_check_restore();
/* ok, let's return from sleep */
config S3C2410_DMA
bool "S3C2410 DMA support"
depends on ARCH_S3C2410
+ select S3C_DMA
help
S3C2410 DMA support. This is needed for drivers like sound which
use the S3C2410's DMA system to move data to and from the
unsigned char channel;
void (*select_cb)(unsigned selected);
- void (*convert_cb)(unsigned val1, unsigned val2);
+ void (*convert_cb)(unsigned val1, unsigned val2,
+ unsigned *samples_left);
};
struct adc_device {
struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
void (*select)(unsigned int selected),
- void (*conv)(unsigned d0, unsigned d1),
+ void (*conv)(unsigned d0, unsigned d1,
+ unsigned *samples_left),
unsigned int is_ts)
{
struct s3c_adc_client *client;
data1 = readl(adc->regs + S3C2410_ADCDAT1);
adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
- (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+ client->nr_samples--;
+ (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
- if (--client->nr_samples > 0) {
+ if (client->nr_samples > 0) {
/* fire another conversion for this */
client->select_cb(1);
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
+#include <linux/gpio.h>
#include <linux/sysdev.h>
#include <linux/platform_device.h>
/* LED devices */
static struct s3c24xx_led_platdata smdk_pdata_led4 = {
- .gpio = S3C2410_GPF4,
+ .gpio = S3C2410_GPF(4),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led4",
.def_trigger = "timer",
};
static struct s3c24xx_led_platdata smdk_pdata_led5 = {
- .gpio = S3C2410_GPF5,
+ .gpio = S3C2410_GPF(5),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led5",
.def_trigger = "nand-disk",
};
static struct s3c24xx_led_platdata smdk_pdata_led6 = {
- .gpio = S3C2410_GPF6,
+ .gpio = S3C2410_GPF(6),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led6",
};
static struct s3c24xx_led_platdata smdk_pdata_led7 = {
- .gpio = S3C2410_GPF7,
+ .gpio = S3C2410_GPF(7),
.flags = S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
.name = "led7",
};
{
/* Configure the LEDs (even if we have no LED support)*/
- s3c2410_gpio_cfgpin(S3C2410_GPF4, S3C2410_GPF4_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF5, S3C2410_GPF5_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF6, S3C2410_GPF6_OUTP);
- s3c2410_gpio_cfgpin(S3C2410_GPF7, S3C2410_GPF7_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(4), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(5), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(6), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPF(7), S3C2410_GPIO_OUTPUT);
- s3c2410_gpio_setpin(S3C2410_GPF4, 1);
- s3c2410_gpio_setpin(S3C2410_GPF5, 1);
- s3c2410_gpio_setpin(S3C2410_GPF6, 1);
- s3c2410_gpio_setpin(S3C2410_GPF7, 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(4), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(5), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(6), 1);
+ s3c2410_gpio_setpin(S3C2410_GPF(7), 1);
if (machine_is_smdk2443())
smdk_nand_info.twrph0 = 50;
struct platform_device *s3c24xx_uart_devs[4] = {
};
-/* USB Host Controller */
-
-static struct resource s3c_usb_resource[] = {
- [0] = {
- .start = S3C24XX_PA_USBHOST,
- .end = S3C24XX_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = IRQ_USBH,
- .end = IRQ_USBH,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static u64 s3c_device_usb_dmamask = 0xffffffffUL;
-
-struct platform_device s3c_device_usb = {
- .name = "s3c2410-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(s3c_usb_resource),
- .resource = s3c_usb_resource,
- .dev = {
- .dma_mask = &s3c_device_usb_dmamask,
- .coherent_dma_mask = 0xffffffffUL
- }
-};
-
-EXPORT_SYMBOL(s3c_device_usb);
-
/* LCD Controller */
static struct resource s3c_lcd_resource[] = {
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/dma.h>
-
#include <mach/map.h>
-#include <plat/dma.h>
+#include <plat/dma-plat.h>
+#include <plat/regs-dma.h>
/* io map for dma */
static void __iomem *dma_base;
static struct s3c24xx_dma_selection dma_sel;
-/* dma channel state information */
-struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
/* debugging functions */
#define dbg_showchan(chan) do { } while(0)
#endif /* CONFIG_S3C2410_DMA_DEBUG */
-static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX];
-
-/* lookup_dma_channel
- *
- * change the dma channel number given into a real dma channel id
-*/
-
-static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel)
-{
- if (channel & DMACH_LOW_LEVEL)
- return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL];
- else
- return dma_chan_map[channel];
-}
-
/* s3c2410_dma_stats_timeout
*
* Update DMA stats from timeout info
return 0;
}
-
-
/* s3c2410_dma_loadbuffer
*
* load a buffer, and update the channel state
int s3c2410_dma_enqueue(unsigned int channel, void *id,
dma_addr_t data, int size)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
struct s3c2410_dma_buf *buf;
unsigned long flags;
int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
unsigned long flags;
if (chan == NULL)
chan->irq_claimed = 0;
if (!(channel & DMACH_LOW_LEVEL))
- dma_chan_map[channel] = NULL;
+ s3c_dma_chan_map[channel] = NULL;
local_irq_restore(flags);
int
s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
/* s3c2410_dma_config
*
* xfersize: size of unit in bytes (1,2,4)
- * dcon: base value of the DCONx register
*/
int s3c2410_dma_config(unsigned int channel,
- int xferunit,
- int dcon)
+ int xferunit)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ unsigned int dcon;
pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
__func__, channel, xferunit, dcon);
pr_debug("%s: Initial dcon is %08x\n", __func__, dcon);
- dcon |= chan->dcon & dma_sel.dcon_mask;
+ dcon = chan->dcon & dma_sel.dcon_mask;
pr_debug("%s: New dcon is %08x\n", __func__, dcon);
+ switch (chan->req_ch) {
+ case DMACH_I2S_IN:
+ case DMACH_I2S_OUT:
+ case DMACH_PCM_IN:
+ case DMACH_PCM_OUT:
+ case DMACH_MIC_IN:
+ default:
+ dcon |= S3C2410_DCON_HANDSHAKE;
+ dcon |= S3C2410_DCON_SYNC_PCLK;
+ break;
+
+ case DMACH_SDI:
+ /* note, ensure if need HANDSHAKE or not */
+ dcon |= S3C2410_DCON_SYNC_PCLK;
+ break;
+
+ case DMACH_XD0:
+ case DMACH_XD1:
+ dcon |= S3C2410_DCON_HANDSHAKE;
+ dcon |= S3C2410_DCON_SYNC_HCLK;
+ break;
+ }
+
switch (xferunit) {
case 1:
dcon |= S3C2410_DCON_BYTE;
EXPORT_SYMBOL(s3c2410_dma_config);
-int s3c2410_dma_setflags(unsigned int channel, unsigned int flags)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, flags=%08x\n", __func__, chan, flags);
-
- chan->flags = flags;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_setflags);
-
-
-/* do we need to protect the settings of the fields from
- * irq?
-*/
-
-int s3c2410_dma_set_opfn(unsigned int channel, s3c2410_dma_opfn_t rtn)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, op rtn=%p\n", __func__, chan, rtn);
-
- chan->op_fn = rtn;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_opfn);
-
-int s3c2410_dma_set_buffdone_fn(unsigned int channel, s3c2410_dma_cbfn_t rtn)
-{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
-
- if (chan == NULL)
- return -EINVAL;
-
- pr_debug("%s: chan=%p, callback rtn=%p\n", __func__, chan, rtn);
-
- chan->callback_fn = rtn;
-
- return 0;
-}
-
-EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
/* s3c2410_dma_devconfig
*
* source: S3C2410_DMASRC_HW: source is hardware
* S3C2410_DMASRC_MEM: source is memory
*
- * hwcfg: the value for xxxSTCn register,
- * bit 0: 0=increment pointer, 1=leave pointer
- * bit 1: 0=source is AHB, 1=source is APB
- *
* devaddr: physical address of the source
*/
int s3c2410_dma_devconfig(int channel,
enum s3c2410_dmasrc source,
- int hwcfg,
unsigned long devaddr)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ unsigned int hwcfg;
if (chan == NULL)
return -EINVAL;
- pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n",
- __func__, (int)source, hwcfg, devaddr);
+ pr_debug("%s: source=%d, devaddr=%08lx\n",
+ __func__, (int)source, devaddr);
chan->source = source;
chan->dev_addr = devaddr;
- chan->hw_cfg = hwcfg;
+
+ switch (chan->req_ch) {
+ case DMACH_XD0:
+ case DMACH_XD1:
+ hwcfg = 0; /* AHB */
+ break;
+
+ default:
+ hwcfg = S3C2410_DISRCC_APB;
+ }
+
+ /* always assume our peripheral desintation is a fixed
+ * address in memory. */
+ hwcfg |= S3C2410_DISRCC_INC;
switch (source) {
case S3C2410_DMASRC_HW:
int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *dst)
{
- struct s3c2410_dma_chan *chan = lookup_dma_channel(channel);
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
if (chan == NULL)
return -EINVAL;
printk(KERN_INFO "dma%d: restoring configuration\n", cp->number);
- s3c2410_dma_config(no, cp->xfer_unit, cp->dcon);
- s3c2410_dma_devconfig(no, cp->source, cp->hw_cfg, cp->dev_addr);
+ s3c2410_dma_config(no, cp->xfer_unit);
+ s3c2410_dma_devconfig(no, cp->source, cp->dev_addr);
/* re-select the dma source for this channel */
found:
dmach = &s3c2410_chans[ch];
dmach->map = ch_map;
- dma_chan_map[channel] = dmach;
+ dmach->req_ch = channel;
+ s3c_dma_chan_map[channel] = dmach;
/* select the channel */
int s3c2410_gpio_getirq(unsigned int pin)
{
- if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15)
- return -1; /* not valid interrupts */
+ if (pin < S3C2410_GPF(0) || pin > S3C2410_GPG(15))
+ return -EINVAL; /* not valid interrupts */
- if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7)
- return -1; /* not valid pin */
+ if (pin < S3C2410_GPG(0) && pin > S3C2410_GPF(7))
+ return -EINVAL; /* not valid pin */
- if (pin < S3C2410_GPF4)
- return (pin - S3C2410_GPF0) + IRQ_EINT0;
+ if (pin < S3C2410_GPF(4))
+ return (pin - S3C2410_GPF(0)) + IRQ_EINT0;
- if (pin < S3C2410_GPG0)
- return (pin - S3C2410_GPF4) + IRQ_EINT4;
+ if (pin < S3C2410_GPG(0))
+ return (pin - S3C2410_GPF(4)) + IRQ_EINT4;
- return (pin - S3C2410_GPG0) + IRQ_EINT8;
+ return (pin - S3C2410_GPG(0)) + IRQ_EINT8;
}
EXPORT_SYMBOL(s3c2410_gpio_getirq);
-
-int s3c2410_gpio_irq2pin(unsigned int irq)
-{
- if (irq >= IRQ_EINT0 && irq <= IRQ_EINT3)
- return S3C2410_GPF0 + (irq - IRQ_EINT0);
-
- if (irq >= IRQ_EINT4 && irq <= IRQ_EINT7)
- return S3C2410_GPF4 + (irq - IRQ_EINT4);
-
- if (irq >= IRQ_EINT8 && irq <= IRQ_EINT23)
- return S3C2410_GPG0 + (irq - IRQ_EINT8);
-
- return -EINVAL;
-}
-
-EXPORT_SYMBOL(s3c2410_gpio_irq2pin);
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
+#include <linux/sysdev.h>
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>
+#include <plat/pm.h>
#include <mach/regs-gpio.h>
struct s3c_gpio_chip s3c24xx_gpios[] = {
[0] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPA0),
+ .base = S3C2410_GPACON,
+ .pm = __gpio_pm(&s3c_gpio_pm_1bit),
.chip = {
- .base = S3C2410_GPA0,
+ .base = S3C2410_GPA(0),
.owner = THIS_MODULE,
.label = "GPIOA",
.ngpio = 24,
},
},
[1] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPB0),
+ .base = S3C2410_GPBCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPB0,
+ .base = S3C2410_GPB(0),
.owner = THIS_MODULE,
.label = "GPIOB",
.ngpio = 16,
},
},
[2] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPC0),
+ .base = S3C2410_GPCCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPC0,
+ .base = S3C2410_GPC(0),
.owner = THIS_MODULE,
.label = "GPIOC",
.ngpio = 16,
},
},
[3] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPD0),
+ .base = S3C2410_GPDCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPD0,
+ .base = S3C2410_GPD(0),
.owner = THIS_MODULE,
.label = "GPIOD",
.ngpio = 16,
},
},
[4] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPE0),
+ .base = S3C2410_GPECON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPE0,
+ .base = S3C2410_GPE(0),
.label = "GPIOE",
.owner = THIS_MODULE,
.ngpio = 16,
},
},
[5] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPF0),
+ .base = S3C2410_GPFCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPF0,
+ .base = S3C2410_GPF(0),
.owner = THIS_MODULE,
.label = "GPIOF",
.ngpio = 8,
},
},
[6] = {
- .base = S3C24XX_GPIO_BASE(S3C2410_GPG0),
+ .base = S3C2410_GPGCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
.chip = {
- .base = S3C2410_GPG0,
+ .base = S3C2410_GPG(0),
.owner = THIS_MODULE,
.label = "GPIOG",
- .ngpio = 10,
+ .ngpio = 16,
.to_irq = s3c24xx_gpiolib_bankg_toirq,
},
+ }, {
+ .base = S3C2410_GPHCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2410_GPH(0),
+ .owner = THIS_MODULE,
+ .label = "GPIOH",
+ .ngpio = 11,
+ },
},
};
return 0;
}
-arch_initcall(s3c24xx_gpiolib_init);
+core_initcall(s3c24xx_gpiolib_init);
-/* linux/include/asm-arm/plat-s3c24xx/dma.h
+/* linux/arch/arm/plat-s3c24xx/include/plat/dma-plat.h
*
* Copyright (C) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* published by the Free Software Foundation.
*/
+#include <plat/dma-core.h>
+
extern struct sysdev_class dma_sysclass;
-extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS];
#define DMA_CH_VALID (1<<31)
#define DMA_CH_NEVER (1<<30)
const char *name;
struct s3c24xx_dma_addr hw_addr;
- unsigned long channels[S3C2410_DMA_CHANNELS];
- unsigned long channels_rx[S3C2410_DMA_CHANNELS];
+ unsigned long channels[S3C_DMA_CHANNELS];
+ unsigned long channels_rx[S3C_DMA_CHANNELS];
};
struct s3c24xx_dma_selection {
*/
struct s3c24xx_dma_order_ch {
- unsigned int list[S3C2410_DMA_CHANNELS]; /* list of channels */
+ unsigned int list[S3C_DMA_CHANNELS]; /* list of channels */
unsigned int flags; /* flags */
};
#define S3C24XX_SZ_SPI SZ_1M
#define S3C24XX_SZ_SDI SZ_1M
#define S3C24XX_SZ_NAND SZ_1M
-#define S3C24XX_SZ_USBHOST SZ_1M
/* GPIO ports */
s3c_pm_show_resume_irqs(IRQ_EINT4-4, __raw_readl(S3C2410_EINTPEND),
s3c_irqwake_eintmask);
}
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+}
--- /dev/null
+/* arch/arm/mach-s3c2410/include/mach/dma.h
+ *
+ * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* DMA Register definitions */
+
+#define S3C2410_DMA_DISRC (0x00)
+#define S3C2410_DMA_DISRCC (0x04)
+#define S3C2410_DMA_DIDST (0x08)
+#define S3C2410_DMA_DIDSTC (0x0C)
+#define S3C2410_DMA_DCON (0x10)
+#define S3C2410_DMA_DSTAT (0x14)
+#define S3C2410_DMA_DCSRC (0x18)
+#define S3C2410_DMA_DCDST (0x1C)
+#define S3C2410_DMA_DMASKTRIG (0x20)
+#define S3C2412_DMA_DMAREQSEL (0x24)
+#define S3C2443_DMA_DMAREQSEL (0x24)
+
+#define S3C2410_DISRCC_INC (1<<0)
+#define S3C2410_DISRCC_APB (1<<1)
+
+#define S3C2410_DMASKTRIG_STOP (1<<2)
+#define S3C2410_DMASKTRIG_ON (1<<1)
+#define S3C2410_DMASKTRIG_SWTRIG (1<<0)
+
+#define S3C2410_DCON_DEMAND (0<<31)
+#define S3C2410_DCON_HANDSHAKE (1<<31)
+#define S3C2410_DCON_SYNC_PCLK (0<<30)
+#define S3C2410_DCON_SYNC_HCLK (1<<30)
+
+#define S3C2410_DCON_INTREQ (1<<29)
+
+#define S3C2410_DCON_CH0_XDREQ0 (0<<24)
+#define S3C2410_DCON_CH0_UART0 (1<<24)
+#define S3C2410_DCON_CH0_SDI (2<<24)
+#define S3C2410_DCON_CH0_TIMER (3<<24)
+#define S3C2410_DCON_CH0_USBEP1 (4<<24)
+
+#define S3C2410_DCON_CH1_XDREQ1 (0<<24)
+#define S3C2410_DCON_CH1_UART1 (1<<24)
+#define S3C2410_DCON_CH1_I2SSDI (2<<24)
+#define S3C2410_DCON_CH1_SPI (3<<24)
+#define S3C2410_DCON_CH1_USBEP2 (4<<24)
+
+#define S3C2410_DCON_CH2_I2SSDO (0<<24)
+#define S3C2410_DCON_CH2_I2SSDI (1<<24)
+#define S3C2410_DCON_CH2_SDI (2<<24)
+#define S3C2410_DCON_CH2_TIMER (3<<24)
+#define S3C2410_DCON_CH2_USBEP3 (4<<24)
+
+#define S3C2410_DCON_CH3_UART2 (0<<24)
+#define S3C2410_DCON_CH3_SDI (1<<24)
+#define S3C2410_DCON_CH3_SPI (2<<24)
+#define S3C2410_DCON_CH3_TIMER (3<<24)
+#define S3C2410_DCON_CH3_USBEP4 (4<<24)
+
+#define S3C2410_DCON_SRCSHIFT (24)
+#define S3C2410_DCON_SRCMASK (7<<24)
+
+#define S3C2410_DCON_BYTE (0<<20)
+#define S3C2410_DCON_HALFWORD (1<<20)
+#define S3C2410_DCON_WORD (2<<20)
+
+#define S3C2410_DCON_AUTORELOAD (0<<22)
+#define S3C2410_DCON_NORELOAD (1<<22)
+#define S3C2410_DCON_HWTRIG (1<<23)
+
+#ifdef CONFIG_CPU_S3C2440
+#define S3C2440_DIDSTC_CHKINT (1<<2)
+
+#define S3C2440_DCON_CH0_I2SSDO (5<<24)
+#define S3C2440_DCON_CH0_PCMIN (6<<24)
+
+#define S3C2440_DCON_CH1_PCMOUT (5<<24)
+#define S3C2440_DCON_CH1_SDI (6<<24)
+
+#define S3C2440_DCON_CH2_PCMIN (5<<24)
+#define S3C2440_DCON_CH2_MICIN (6<<24)
+
+#define S3C2440_DCON_CH3_MICIN (5<<24)
+#define S3C2440_DCON_CH3_PCMOUT (6<<24)
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+
+#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1)
+
+#define S3C2412_DMAREQSEL_HW (1)
+
+#define S3C2412_DMAREQSEL_SPI0TX S3C2412_DMAREQSEL_SRC(0)
+#define S3C2412_DMAREQSEL_SPI0RX S3C2412_DMAREQSEL_SRC(1)
+#define S3C2412_DMAREQSEL_SPI1TX S3C2412_DMAREQSEL_SRC(2)
+#define S3C2412_DMAREQSEL_SPI1RX S3C2412_DMAREQSEL_SRC(3)
+#define S3C2412_DMAREQSEL_I2STX S3C2412_DMAREQSEL_SRC(4)
+#define S3C2412_DMAREQSEL_I2SRX S3C2412_DMAREQSEL_SRC(5)
+#define S3C2412_DMAREQSEL_TIMER S3C2412_DMAREQSEL_SRC(9)
+#define S3C2412_DMAREQSEL_SDI S3C2412_DMAREQSEL_SRC(10)
+#define S3C2412_DMAREQSEL_USBEP1 S3C2412_DMAREQSEL_SRC(13)
+#define S3C2412_DMAREQSEL_USBEP2 S3C2412_DMAREQSEL_SRC(14)
+#define S3C2412_DMAREQSEL_USBEP3 S3C2412_DMAREQSEL_SRC(15)
+#define S3C2412_DMAREQSEL_USBEP4 S3C2412_DMAREQSEL_SRC(16)
+#define S3C2412_DMAREQSEL_XDREQ0 S3C2412_DMAREQSEL_SRC(17)
+#define S3C2412_DMAREQSEL_XDREQ1 S3C2412_DMAREQSEL_SRC(18)
+#define S3C2412_DMAREQSEL_UART0_0 S3C2412_DMAREQSEL_SRC(19)
+#define S3C2412_DMAREQSEL_UART0_1 S3C2412_DMAREQSEL_SRC(20)
+#define S3C2412_DMAREQSEL_UART1_0 S3C2412_DMAREQSEL_SRC(21)
+#define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22)
+#define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23)
+#define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24)
+
+#endif
+
+#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW (1)
+
+#define S3C2443_DMAREQSEL_SPI0TX S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0 S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1 S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0 S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1 S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0 S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1 S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0 S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1 S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29)
#include <linux/suspend.h>
#include <linux/errno.h>
#include <linux/time.h>
+#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/serial_core.h>
#include <linux/io.h>
SAVE_ITEM(S3C2410_CLKSLOW),
};
-static struct gpio_sleep {
- void __iomem *base;
- unsigned int gpcon;
- unsigned int gpdat;
- unsigned int gpup;
-} gpio_save[] = {
- [0] = {
- .base = S3C2410_GPACON,
- },
- [1] = {
- .base = S3C2410_GPBCON,
- },
- [2] = {
- .base = S3C2410_GPCCON,
- },
- [3] = {
- .base = S3C2410_GPDCON,
- },
- [4] = {
- .base = S3C2410_GPECON,
- },
- [5] = {
- .base = S3C2410_GPFCON,
- },
- [6] = {
- .base = S3C2410_GPGCON,
- },
- [7] = {
- .base = S3C2410_GPHCON,
- },
-};
-
static struct sleep_save misc_save[] = {
SAVE_ITEM(S3C2410_DCLKCON),
};
-
/* s3c_pm_check_resume_pin
*
* check to see if the pin is configured correctly for sleep mode, and
* and then configure it as an input if it is not
*/
- for (pin = S3C2410_GPF0; pin <= S3C2410_GPF7; pin++) {
- s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF0);
- }
-
- for (pin = S3C2410_GPG0; pin <= S3C2410_GPG7; pin++) {
- s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG0)+8);
+ for (pin = S3C2410_GPF(0); pin <= S3C2410_GPF(7); pin++) {
+ s3c_pm_check_resume_pin(pin, pin - S3C2410_GPF(0));
}
-}
-
-/* offsets for CON/DAT/UP registers */
-
-#define OFFS_CON (S3C2410_GPACON - S3C2410_GPACON)
-#define OFFS_DAT (S3C2410_GPADAT - S3C2410_GPACON)
-#define OFFS_UP (S3C2410_GPBUP - S3C2410_GPBCON)
-
-/* s3c_pm_save_gpios()
- *
- * Save the state of the GPIOs
- */
-
-void s3c_pm_save_gpios(void)
-{
- struct gpio_sleep *gps = gpio_save;
- unsigned int gpio;
-
- for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
- void __iomem *base = gps->base;
-
- gps->gpcon = __raw_readl(base + OFFS_CON);
- gps->gpdat = __raw_readl(base + OFFS_DAT);
-
- if (gpio > 0)
- gps->gpup = __raw_readl(base + OFFS_UP);
+ for (pin = S3C2410_GPG(0); pin <= S3C2410_GPG(7); pin++) {
+ s3c_pm_check_resume_pin(pin, (pin - S3C2410_GPG(0))+8);
}
}
-/* Test whether the given masked+shifted bits of an GPIO configuration
- * are one of the SFN (special function) modes. */
-
-static inline int is_sfn(unsigned long con)
-{
- return (con == 2 || con == 3);
-}
-
-/* Test if the given masked+shifted GPIO configuration is an input */
-
-static inline int is_in(unsigned long con)
-{
- return con == 0;
-}
-
-/* Test if the given masked+shifted GPIO configuration is an output */
-
-static inline int is_out(unsigned long con)
-{
- return con == 1;
-}
-
-/**
- * s3c2410_pm_restore_gpio() - restore the given GPIO bank
- * @index: The number of the GPIO bank being resumed.
- * @gps: The sleep confgiuration for the bank.
- *
- * Restore one of the GPIO banks that was saved during suspend. This is
- * not as simple as once thought, due to the possibility of glitches
- * from the order that the CON and DAT registers are set in.
- *
- * The three states the pin can be are {IN,OUT,SFN} which gives us 9
- * combinations of changes to check. Three of these, if the pin stays
- * in the same configuration can be discounted. This leaves us with
- * the following:
- *
- * { IN => OUT } Change DAT first
- * { IN => SFN } Change CON first
- * { OUT => SFN } Change CON first, so new data will not glitch
- * { OUT => IN } Change CON first, so new data will not glitch
- * { SFN => IN } Change CON first
- * { SFN => OUT } Change DAT first, so new data will not glitch [1]
- *
- * We do not currently deal with the UP registers as these control
- * weak resistors, so a small delay in change should not need to bring
- * these into the calculations.
- *
- * [1] this assumes that writing to a pin DAT whilst in SFN will set the
- * state for when it is next output.
- */
-
-static void s3c2410_pm_restore_gpio(int index, struct gpio_sleep *gps)
-{
- void __iomem *base = gps->base;
- unsigned long gps_gpcon = gps->gpcon;
- unsigned long gps_gpdat = gps->gpdat;
- unsigned long old_gpcon;
- unsigned long old_gpdat;
- unsigned long old_gpup = 0x0;
- unsigned long gpcon;
- int nr;
-
- old_gpcon = __raw_readl(base + OFFS_CON);
- old_gpdat = __raw_readl(base + OFFS_DAT);
-
- if (base == S3C2410_GPACON) {
- /* GPACON only has one bit per control / data and no PULLUPs.
- * GPACON[x] = 0 => Output, 1 => SFN */
-
- /* first set all SFN bits to SFN */
-
- gpcon = old_gpcon | gps->gpcon;
- __raw_writel(gpcon, base + OFFS_CON);
-
- /* now set all the other bits */
-
- __raw_writel(gps_gpdat, base + OFFS_DAT);
- __raw_writel(gps_gpcon, base + OFFS_CON);
- } else {
- unsigned long old, new, mask;
- unsigned long change_mask = 0x0;
-
- old_gpup = __raw_readl(base + OFFS_UP);
-
- /* Create a change_mask of all the items that need to have
- * their CON value changed before their DAT value, so that
- * we minimise the work between the two settings.
- */
-
- for (nr = 0, mask = 0x03; nr < 32; nr += 2, mask <<= 2) {
- old = (old_gpcon & mask) >> nr;
- new = (gps_gpcon & mask) >> nr;
-
- /* If there is no change, then skip */
-
- if (old == new)
- continue;
-
- /* If both are special function, then skip */
-
- if (is_sfn(old) && is_sfn(new))
- continue;
-
- /* Change is IN => OUT, do not change now */
-
- if (is_in(old) && is_out(new))
- continue;
-
- /* Change is SFN => OUT, do not change now */
-
- if (is_sfn(old) && is_out(new))
- continue;
-
- /* We should now be at the case of IN=>SFN,
- * OUT=>SFN, OUT=>IN, SFN=>IN. */
-
- change_mask |= mask;
- }
-
- /* Write the new CON settings */
-
- gpcon = old_gpcon & ~change_mask;
- gpcon |= gps_gpcon & change_mask;
-
- __raw_writel(gpcon, base + OFFS_CON);
-
- /* Now change any items that require DAT,CON */
-
- __raw_writel(gps_gpdat, base + OFFS_DAT);
- __raw_writel(gps_gpcon, base + OFFS_CON);
- __raw_writel(gps->gpup, base + OFFS_UP);
- }
-
- S3C_PMDBG("GPIO[%d] CON %08lx => %08lx, DAT %08lx => %08lx\n",
- index, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat);
-}
-
-
-/** s3c2410_pm_restore_gpios()
- *
- * Restore the state of the GPIOs
- */
-
-void s3c_pm_restore_gpios(void)
-{
- struct gpio_sleep *gps = gpio_save;
- int gpio;
-
- for (gpio = 0; gpio < ARRAY_SIZE(gpio_save); gpio++, gps++) {
- s3c2410_pm_restore_gpio(gpio, gps);
- }
-}
void s3c_pm_restore_core(void)
{
*/
#include <linux/kernel.h>
+#include <linux/gpio.h>
struct platform_device;
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
- s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA);
- s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(15), S3C2410_GPE15_IICSDA);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(14), S3C2410_GPE14_IICSCL);
}
int enable)
{
if (enable) {
- s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0);
- s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0);
- s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0);
- s3c2410_gpio_pullup(S3C2410_GPE11, 0);
- s3c2410_gpio_pullup(S3C2410_GPE13, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0);
+ s3c2410_gpio_pullup(S3C2410_GPE(11), 0);
+ s3c2410_gpio_pullup(S3C2410_GPE(13), 0);
} else {
- s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT);
- s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT);
- s3c2410_gpio_pullup(S3C2410_GPE11, 1);
- s3c2410_gpio_pullup(S3C2410_GPE12, 1);
- s3c2410_gpio_pullup(S3C2410_GPE13, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPE(11), 1);
+ s3c2410_gpio_pullup(S3C2410_GPE(12), 1);
+ s3c2410_gpio_pullup(S3C2410_GPE(13), 1);
}
}
int enable)
{
if (enable) {
- s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1);
- s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1);
- s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1);
- s3c2410_gpio_pullup(S3C2410_GPG5, 0);
- s3c2410_gpio_pullup(S3C2410_GPG6, 0);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1);
+ s3c2410_gpio_pullup(S3C2410_GPG(5), 0);
+ s3c2410_gpio_pullup(S3C2410_GPG(6), 0);
} else {
- s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT);
- s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT);
- s3c2410_gpio_pullup(S3C2410_GPG5, 1);
- s3c2410_gpio_pullup(S3C2410_GPG6, 1);
- s3c2410_gpio_pullup(S3C2410_GPG7, 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_pullup(S3C2410_GPG(5), 1);
+ s3c2410_gpio_pullup(S3C2410_GPG(6), 1);
+ s3c2410_gpio_pullup(S3C2410_GPG(7), 1);
}
}
select S3C_GPIO_PULL_UPDOWN
select S3C_GPIO_CFG_S3C24XX
select S3C_GPIO_CFG_S3C64XX
+ select USB_ARCH_HAS_OHCI
help
Base platform code for any Samsung S3C64XX device
Common clock support code for the S3C6400 that is shared
by other CPUs in the series, such as the S3C6410.
+config S3C64XX_DMA
+ bool "S3C64XX DMA"
+ select S3C_DMA
+
# platform specific device setup
config S3C64XX_SETUP_I2C0
help
Common setup code for S3C64XX with an 24bpp RGB display helper.
+config S3C64XX_SETUP_SDHCI_GPIO
+ bool
+ help
+ Common setup code for S3C64XX SDHCI GPIO configurations
+
endif
obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o
obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o
+# PM support
+
+obj-$(CONFIG_PM) += pm.o
+obj-$(CONFIG_PM) += sleep.o
+obj-$(CONFIG_PM) += irq-pm.o
+
+# DMA support
+
+obj-$(CONFIG_S3C64XX_DMA) += dma.o
+
# Device setup
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
\ No newline at end of file
#include <plat/devs.h>
#include <plat/clock.h>
+struct clk clk_h2 = {
+ .name = "hclk2",
+ .id = -1,
+ .rate = 0,
+};
+
struct clk clk_27m = {
.name = "clk_27m",
.id = -1,
.parent = &clk_48m,
.enable = s3c64xx_sclk_ctrl,
.ctrlbit = S3C_CLKCON_SCLK_MMC2_48,
+ }, {
+ .name = "dma0",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_DMA0,
+ }, {
+ .name = "dma1",
+ .id = -1,
+ .parent = &clk_h,
+ .enable = s3c64xx_hclk_ctrl,
+ .ctrlbit = S3C_CLKCON_HCLK_DMA1,
},
};
&clk_epll,
&clk_27m,
&clk_48m,
+ &clk_h2,
};
void __init s3c64xx_register_clocks(void)
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ioport.h>
+#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
.pfn = __phys_to_pfn(S3C64XX_PA_MODEM),
.length = SZ_4K,
.type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(S3C64XX_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
},
};
+
+struct sysdev_class s3c64xx_sysclass = {
+ .name = "s3c64xx-core",
+};
+
+static struct sys_device s3c64xx_sysdev = {
+ .cls = &s3c64xx_sysclass,
+};
+
+
/* read cpu identification code */
void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
iotable_init(mach_desc, size);
idcode = __raw_readl(S3C_VA_SYS + 0x118);
+ if (!idcode) {
+ /* S3C6400 has the ID register in a different place,
+ * and needs a write before it can be read. */
+
+ __raw_writel(0x0, S3C_VA_SYS + 0xA1C);
+ idcode = __raw_readl(S3C_VA_SYS + 0xA1C);
+ }
+
s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids));
}
+
+static __init int s3c64xx_sysdev_init(void)
+{
+ sysdev_class_register(&s3c64xx_sysclass);
+ return sysdev_register(&s3c64xx_sysdev);
+}
+
+core_initcall(s3c64xx_sysdev_init);
--- /dev/null
+/* linux/arch/arm/plat-s3c64xx/dma.c
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/dmapool.h>
+#include <linux/sysdev.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <mach/dma.h>
+#include <mach/map.h>
+#include <mach/irqs.h>
+
+#include <plat/dma-plat.h>
+#include <plat/regs-sys.h>
+
+#include <asm/hardware/pl080.h>
+
+/* dma channel state information */
+
+struct s3c64xx_dmac {
+ struct sys_device sysdev;
+ struct clk *clk;
+ void __iomem *regs;
+ struct s3c2410_dma_chan *channels;
+ enum dma_ch chanbase;
+};
+
+/* pool to provide LLI buffers */
+static struct dma_pool *dma_pool;
+
+/* Debug configuration and code */
+
+static unsigned char debug_show_buffs = 0;
+
+static void dbg_showchan(struct s3c2410_dma_chan *chan)
+{
+ pr_debug("DMA%d: %08x->%08x L %08x C %08x,%08x S %08x\n",
+ chan->number,
+ readl(chan->regs + PL080_CH_SRC_ADDR),
+ readl(chan->regs + PL080_CH_DST_ADDR),
+ readl(chan->regs + PL080_CH_LLI),
+ readl(chan->regs + PL080_CH_CONTROL),
+ readl(chan->regs + PL080S_CH_CONTROL2),
+ readl(chan->regs + PL080S_CH_CONFIG));
+}
+
+static void show_lli(struct pl080s_lli *lli)
+{
+ pr_debug("LLI[%p] %08x->%08x, NL %08x C %08x,%08x\n",
+ lli, lli->src_addr, lli->dst_addr, lli->next_lli,
+ lli->control0, lli->control1);
+}
+
+static void dbg_showbuffs(struct s3c2410_dma_chan *chan)
+{
+ struct s3c64xx_dma_buff *ptr;
+ struct s3c64xx_dma_buff *end;
+
+ pr_debug("DMA%d: buffs next %p, curr %p, end %p\n",
+ chan->number, chan->next, chan->curr, chan->end);
+
+ ptr = chan->next;
+ end = chan->end;
+
+ if (debug_show_buffs) {
+ for (; ptr != NULL; ptr = ptr->next) {
+ pr_debug("DMA%d: %08x ",
+ chan->number, ptr->lli_dma);
+ show_lli(ptr->lli);
+ }
+ }
+}
+
+/* End of Debug */
+
+static struct s3c2410_dma_chan *s3c64xx_dma_map_channel(unsigned int channel)
+{
+ struct s3c2410_dma_chan *chan;
+ unsigned int start, offs;
+
+ start = 0;
+
+ if (channel >= DMACH_PCM1_TX)
+ start = 8;
+
+ for (offs = 0; offs < 8; offs++) {
+ chan = &s3c2410_chans[start + offs];
+ if (!chan->in_use)
+ goto found;
+ }
+
+ return NULL;
+
+found:
+ s3c_dma_chan_map[channel] = chan;
+ return chan;
+}
+
+int s3c2410_dma_config(unsigned int channel, int xferunit)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ switch (xferunit) {
+ case 1:
+ chan->hw_width = 0;
+ break;
+ case 2:
+ chan->hw_width = 1;
+ break;
+ case 4:
+ chan->hw_width = 2;
+ break;
+ default:
+ printk(KERN_ERR "%s: illegal width %d\n", __func__, xferunit);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_config);
+
+static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan,
+ struct pl080s_lli *lli,
+ dma_addr_t data, int size)
+{
+ dma_addr_t src, dst;
+ u32 control0, control1;
+
+ switch (chan->source) {
+ case S3C2410_DMASRC_HW:
+ src = chan->dev_addr;
+ dst = data;
+ control0 = PL080_CONTROL_SRC_AHB2;
+ control0 |= (u32)chan->hw_width << PL080_CONTROL_SWIDTH_SHIFT;
+ control0 |= 2 << PL080_CONTROL_DWIDTH_SHIFT;
+ control0 |= PL080_CONTROL_DST_INCR;
+ break;
+
+ case S3C2410_DMASRC_MEM:
+ src = data;
+ dst = chan->dev_addr;
+ control0 = PL080_CONTROL_DST_AHB2;
+ control0 |= (u32)chan->hw_width << PL080_CONTROL_DWIDTH_SHIFT;
+ control0 |= 2 << PL080_CONTROL_SWIDTH_SHIFT;
+ control0 |= PL080_CONTROL_SRC_INCR;
+ break;
+ default:
+ BUG();
+ }
+
+ /* note, we do not currently setup any of the burst controls */
+
+ control1 = size >> chan->hw_width; /* size in no of xfers */
+ control0 |= PL080_CONTROL_PROT_SYS; /* always in priv. mode */
+ control0 |= PL080_CONTROL_TC_IRQ_EN; /* always fire IRQ */
+
+ lli->src_addr = src;
+ lli->dst_addr = dst;
+ lli->next_lli = 0;
+ lli->control0 = control0;
+ lli->control1 = control1;
+}
+
+static void s3c64xx_lli_to_regs(struct s3c2410_dma_chan *chan,
+ struct pl080s_lli *lli)
+{
+ void __iomem *regs = chan->regs;
+
+ pr_debug("%s: LLI %p => regs\n", __func__, lli);
+ show_lli(lli);
+
+ writel(lli->src_addr, regs + PL080_CH_SRC_ADDR);
+ writel(lli->dst_addr, regs + PL080_CH_DST_ADDR);
+ writel(lli->next_lli, regs + PL080_CH_LLI);
+ writel(lli->control0, regs + PL080_CH_CONTROL);
+ writel(lli->control1, regs + PL080S_CH_CONTROL2);
+}
+
+static int s3c64xx_dma_start(struct s3c2410_dma_chan *chan)
+{
+ struct s3c64xx_dmac *dmac = chan->dmac;
+ u32 config;
+ u32 bit = chan->bit;
+
+ dbg_showchan(chan);
+
+ pr_debug("%s: clearing interrupts\n", __func__);
+
+ /* clear interrupts */
+ writel(bit, dmac->regs + PL080_TC_CLEAR);
+ writel(bit, dmac->regs + PL080_ERR_CLEAR);
+
+ pr_debug("%s: starting channel\n", __func__);
+
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ config |= PL080_CONFIG_ENABLE;
+
+ pr_debug("%s: writing config %08x\n", __func__, config);
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ return 0;
+}
+
+static int s3c64xx_dma_stop(struct s3c2410_dma_chan *chan)
+{
+ u32 config;
+ int timeout;
+
+ pr_debug("%s: stopping channel\n", __func__);
+
+ dbg_showchan(chan);
+
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ config |= PL080_CONFIG_HALT;
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ timeout = 1000;
+ do {
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ pr_debug("%s: %d - config %08x\n", __func__, timeout, config);
+ if (config & PL080_CONFIG_ACTIVE)
+ udelay(10);
+ else
+ break;
+ } while (--timeout > 0);
+
+ if (config & PL080_CONFIG_ACTIVE) {
+ printk(KERN_ERR "%s: channel still active\n", __func__);
+ return -EFAULT;
+ }
+
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ config &= ~PL080_CONFIG_ENABLE;
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ return 0;
+}
+
+static inline void s3c64xx_dma_bufffdone(struct s3c2410_dma_chan *chan,
+ struct s3c64xx_dma_buff *buf,
+ enum s3c2410_dma_buffresult result)
+{
+ if (chan->callback_fn != NULL)
+ (chan->callback_fn)(chan, buf->pw, 0, result);
+}
+
+static void s3c64xx_dma_freebuff(struct s3c64xx_dma_buff *buff)
+{
+ dma_pool_free(dma_pool, buff->lli, buff->lli_dma);
+ kfree(buff);
+}
+
+static int s3c64xx_dma_flush(struct s3c2410_dma_chan *chan)
+{
+ struct s3c64xx_dma_buff *buff, *next;
+ u32 config;
+
+ dbg_showchan(chan);
+
+ pr_debug("%s: flushing channel\n", __func__);
+
+ config = readl(chan->regs + PL080S_CH_CONFIG);
+ config &= ~PL080_CONFIG_ENABLE;
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ /* dump all the buffers associated with this channel */
+
+ for (buff = chan->curr; buff != NULL; buff = next) {
+ next = buff->next;
+ pr_debug("%s: buff %p (next %p)\n", __func__, buff, buff->next);
+
+ s3c64xx_dma_bufffdone(chan, buff, S3C2410_RES_ABORT);
+ s3c64xx_dma_freebuff(buff);
+ }
+
+ chan->curr = chan->next = chan->end = NULL;
+
+ return 0;
+}
+
+int s3c2410_dma_ctrl(unsigned int channel, enum s3c2410_chan_op op)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ WARN_ON(!chan);
+ if (!chan)
+ return -EINVAL;
+
+ switch (op) {
+ case S3C2410_DMAOP_START:
+ return s3c64xx_dma_start(chan);
+
+ case S3C2410_DMAOP_STOP:
+ return s3c64xx_dma_stop(chan);
+
+ case S3C2410_DMAOP_FLUSH:
+ return s3c64xx_dma_flush(chan);
+
+ /* belive PAUSE/RESUME are no-ops */
+ case S3C2410_DMAOP_PAUSE:
+ case S3C2410_DMAOP_RESUME:
+ case S3C2410_DMAOP_STARTED:
+ case S3C2410_DMAOP_TIMEOUT:
+ return 0;
+ }
+
+ return -ENOENT;
+}
+EXPORT_SYMBOL(s3c2410_dma_ctrl);
+
+/* s3c2410_dma_enque
+ *
+ */
+
+int s3c2410_dma_enqueue(unsigned int channel, void *id,
+ dma_addr_t data, int size)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ struct s3c64xx_dma_buff *next;
+ struct s3c64xx_dma_buff *buff;
+ struct pl080s_lli *lli;
+ int ret;
+
+ WARN_ON(!chan);
+ if (!chan)
+ return -EINVAL;
+
+ buff = kzalloc(sizeof(struct s3c64xx_dma_buff), GFP_KERNEL);
+ if (!buff) {
+ printk(KERN_ERR "%s: no memory for buffer\n", __func__);
+ return -ENOMEM;
+ }
+
+ lli = dma_pool_alloc(dma_pool, GFP_KERNEL, &buff->lli_dma);
+ if (!lli) {
+ printk(KERN_ERR "%s: no memory for lli\n", __func__);
+ ret = -ENOMEM;
+ goto err_buff;
+ }
+
+ pr_debug("%s: buff %p, dp %08x lli (%p, %08x) %d\n",
+ __func__, buff, data, lli, (u32)buff->lli_dma, size);
+
+ buff->lli = lli;
+ buff->pw = id;
+
+ s3c64xx_dma_fill_lli(chan, lli, data, size);
+
+ if ((next = chan->next) != NULL) {
+ struct s3c64xx_dma_buff *end = chan->end;
+ struct pl080s_lli *endlli = end->lli;
+
+ pr_debug("enquing onto channel\n");
+
+ end->next = buff;
+ endlli->next_lli = buff->lli_dma;
+
+ if (chan->flags & S3C2410_DMAF_CIRCULAR) {
+ struct s3c64xx_dma_buff *curr = chan->curr;
+ lli->next_lli = curr->lli_dma;
+ }
+
+ if (next == chan->curr) {
+ writel(buff->lli_dma, chan->regs + PL080_CH_LLI);
+ chan->next = buff;
+ }
+
+ show_lli(endlli);
+ chan->end = buff;
+ } else {
+ pr_debug("enquing onto empty channel\n");
+
+ chan->curr = buff;
+ chan->next = buff;
+ chan->end = buff;
+
+ s3c64xx_lli_to_regs(chan, lli);
+ }
+
+ show_lli(lli);
+
+ dbg_showchan(chan);
+ dbg_showbuffs(chan);
+ return 0;
+
+err_buff:
+ kfree(buff);
+ return ret;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_enqueue);
+
+
+int s3c2410_dma_devconfig(int channel,
+ enum s3c2410_dmasrc source,
+ unsigned long devaddr)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ u32 peripheral;
+ u32 config = 0;
+
+ pr_debug("%s: channel %d, source %d, dev %08lx, chan %p\n",
+ __func__, channel, source, devaddr, chan);
+
+ WARN_ON(!chan);
+ if (!chan)
+ return -EINVAL;
+
+ peripheral = (chan->peripheral & 0xf);
+ chan->source = source;
+ chan->dev_addr = devaddr;
+
+ pr_debug("%s: peripheral %d\n", __func__, peripheral);
+
+ switch (source) {
+ case S3C2410_DMASRC_HW:
+ config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT;
+ break;
+ case S3C2410_DMASRC_MEM:
+ config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT;
+ config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT;
+ break;
+ default:
+ printk(KERN_ERR "%s: bad source\n", __func__);
+ return -EINVAL;
+ }
+
+ /* allow TC and ERR interrupts */
+ config |= PL080_CONFIG_TC_IRQ_MASK;
+ config |= PL080_CONFIG_ERR_IRQ_MASK;
+
+ pr_debug("%s: config %08x\n", __func__, config);
+
+ writel(config, chan->regs + PL080S_CH_CONFIG);
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_devconfig);
+
+
+int s3c2410_dma_getposition(unsigned int channel,
+ dma_addr_t *src, dma_addr_t *dst)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+
+ WARN_ON(!chan);
+ if (!chan)
+ return -EINVAL;
+
+ if (src != NULL)
+ *src = readl(chan->regs + PL080_CH_SRC_ADDR);
+
+ if (dst != NULL)
+ *dst = readl(chan->regs + PL080_CH_DST_ADDR);
+
+ return 0;
+}
+EXPORT_SYMBOL(s3c2410_dma_getposition);
+
+/* s3c2410_request_dma
+ *
+ * get control of an dma channel
+*/
+
+int s3c2410_dma_request(unsigned int channel,
+ struct s3c2410_dma_client *client,
+ void *dev)
+{
+ struct s3c2410_dma_chan *chan;
+ unsigned long flags;
+
+ pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n",
+ channel, client->name, dev);
+
+ local_irq_save(flags);
+
+ chan = s3c64xx_dma_map_channel(channel);
+ if (chan == NULL) {
+ local_irq_restore(flags);
+ return -EBUSY;
+ }
+
+ dbg_showchan(chan);
+
+ chan->client = client;
+ chan->in_use = 1;
+ chan->peripheral = channel;
+
+ local_irq_restore(flags);
+
+ /* need to setup */
+
+ pr_debug("%s: channel initialised, %p\n", __func__, chan);
+
+ return chan->number | DMACH_LOW_LEVEL;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_request);
+
+/* s3c2410_dma_free
+ *
+ * release the given channel back to the system, will stop and flush
+ * any outstanding transfers, and ensure the channel is ready for the
+ * next claimant.
+ *
+ * Note, although a warning is currently printed if the freeing client
+ * info is not the same as the registrant's client info, the free is still
+ * allowed to go through.
+*/
+
+int s3c2410_dma_free(unsigned int channel, struct s3c2410_dma_client *client)
+{
+ struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
+ unsigned long flags;
+
+ if (chan == NULL)
+ return -EINVAL;
+
+ local_irq_save(flags);
+
+ if (chan->client != client) {
+ printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n",
+ channel, chan->client, client);
+ }
+
+ /* sort out stopping and freeing the channel */
+
+
+ chan->client = NULL;
+ chan->in_use = 0;
+
+ if (!(channel & DMACH_LOW_LEVEL))
+ s3c_dma_chan_map[channel] = NULL;
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+EXPORT_SYMBOL(s3c2410_dma_free);
+
+
+static void s3c64xx_dma_tcirq(struct s3c64xx_dmac *dmac, int offs)
+{
+ struct s3c2410_dma_chan *chan = dmac->channels + offs;
+
+ /* note, we currently do not bother to work out which buffer
+ * or buffers have been completed since the last tc-irq. */
+
+ if (chan->callback_fn)
+ (chan->callback_fn)(chan, chan->curr->pw, 0, S3C2410_RES_OK);
+}
+
+static void s3c64xx_dma_errirq(struct s3c64xx_dmac *dmac, int offs)
+{
+ printk(KERN_DEBUG "%s: offs %d\n", __func__, offs);
+}
+
+static irqreturn_t s3c64xx_dma_irq(int irq, void *pw)
+{
+ struct s3c64xx_dmac *dmac = pw;
+ u32 tcstat, errstat;
+ u32 bit;
+ int offs;
+
+ tcstat = readl(dmac->regs + PL080_TC_STATUS);
+ errstat = readl(dmac->regs + PL080_ERR_STATUS);
+
+ for (offs = 0, bit = 1; offs < 8; offs++, bit <<= 1) {
+ if (tcstat & bit) {
+ writel(bit, dmac->regs + PL080_TC_CLEAR);
+ s3c64xx_dma_tcirq(dmac, offs);
+ }
+
+ if (errstat & bit) {
+ s3c64xx_dma_errirq(dmac, offs);
+ writel(bit, dmac->regs + PL080_ERR_CLEAR);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static struct sysdev_class dma_sysclass = {
+ .name = "s3c64xx-dma",
+};
+
+static int s3c64xx_dma_init1(int chno, enum dma_ch chbase,
+ int irq, unsigned int base)
+{
+ struct s3c2410_dma_chan *chptr = &s3c2410_chans[chno];
+ struct s3c64xx_dmac *dmac;
+ char clkname[16];
+ void __iomem *regs;
+ void __iomem *regptr;
+ int err, ch;
+
+ dmac = kzalloc(sizeof(struct s3c64xx_dmac), GFP_KERNEL);
+ if (!dmac) {
+ printk(KERN_ERR "%s: failed to alloc mem\n", __func__);
+ return -ENOMEM;
+ }
+
+ dmac->sysdev.id = chno / 8;
+ dmac->sysdev.cls = &dma_sysclass;
+
+ err = sysdev_register(&dmac->sysdev);
+ if (err) {
+ printk(KERN_ERR "%s: failed to register sysdevice\n", __func__);
+ goto err_alloc;
+ }
+
+ regs = ioremap(base, 0x200);
+ if (!regs) {
+ printk(KERN_ERR "%s: failed to ioremap()\n", __func__);
+ err = -ENXIO;
+ goto err_dev;
+ }
+
+ snprintf(clkname, sizeof(clkname), "dma%d", dmac->sysdev.id);
+
+ dmac->clk = clk_get(NULL, clkname);
+ if (IS_ERR(dmac->clk)) {
+ printk(KERN_ERR "%s: failed to get clock %s\n", __func__, clkname);
+ err = PTR_ERR(dmac->clk);
+ goto err_map;
+ }
+
+ clk_enable(dmac->clk);
+
+ dmac->regs = regs;
+ dmac->chanbase = chbase;
+ dmac->channels = chptr;
+
+ err = request_irq(irq, s3c64xx_dma_irq, 0, "DMA", dmac);
+ if (err < 0) {
+ printk(KERN_ERR "%s: failed to get irq\n", __func__);
+ goto err_clk;
+ }
+
+ regptr = regs + PL080_Cx_BASE(0);
+
+ for (ch = 0; ch < 8; ch++, chno++, chptr++) {
+ printk(KERN_INFO "%s: registering DMA %d (%p)\n",
+ __func__, chno, regptr);
+
+ chptr->bit = 1 << ch;
+ chptr->number = chno;
+ chptr->dmac = dmac;
+ chptr->regs = regptr;
+ regptr += PL008_Cx_STRIDE;
+ }
+
+ /* for the moment, permanently enable the controller */
+ writel(PL080_CONFIG_ENABLE, regs + PL080_CONFIG);
+
+ printk(KERN_INFO "PL080: IRQ %d, at %p\n", irq, regs);
+
+ return 0;
+
+err_clk:
+ clk_disable(dmac->clk);
+ clk_put(dmac->clk);
+err_map:
+ iounmap(regs);
+err_dev:
+ sysdev_unregister(&dmac->sysdev);
+err_alloc:
+ kfree(dmac);
+ return err;
+}
+
+static int __init s3c64xx_dma_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "%s: Registering DMA channels\n", __func__);
+
+ dma_pool = dma_pool_create("DMA-LLI", NULL, 32, 16, 0);
+ if (!dma_pool) {
+ printk(KERN_ERR "%s: failed to create pool\n", __func__);
+ return -ENOMEM;
+ }
+
+ ret = sysdev_class_register(&dma_sysclass);
+ if (ret) {
+ printk(KERN_ERR "%s: failed to create sysclass\n", __func__);
+ return -ENOMEM;
+ }
+
+ /* Set all DMA configuration to be DMA, not SDMA */
+ writel(0xffffff, S3C_SYSREG(0x110));
+
+ /* Register standard DMA controlers */
+ s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000);
+ s3c64xx_dma_init1(8, DMACH_PCM1_TX, IRQ_DMA1, 0x75100000);
+
+ return 0;
+}
+
+arch_initcall(s3c64xx_dma_init);
{
chip->chip.direction_input = s3c64xx_gpiolib_4bit_input;
chip->chip.direction_output = s3c64xx_gpiolib_4bit_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
}
static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip)
{
chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input;
chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output;
+ chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+}
+
+static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip)
+{
+ chip->pm = __gpio_pm(&s3c_gpio_pm_2bit);
}
static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips,
s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2),
s3c64xx_gpiolib_add_4bit2);
- s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL);
+ s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit),
+ s3c64xx_gpiolib_add_2bit);
return 0;
}
--- /dev/null
+/* linux/arch/arm/plat-s3c64xx/include/plat/dma-plat.h
+ *
+ * Copyright 2009 Openmoko, Inc.
+ * Copyright 2009 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX DMA core
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */
+
+struct s3c64xx_dma_buff;
+
+/** s3c64xx_dma_buff - S3C64XX DMA buffer descriptor
+ * @next: Pointer to next buffer in queue or ring.
+ * @pw: Client provided identifier
+ * @lli: Pointer to hardware descriptor this buffer is associated with.
+ * @lli_dma: Hardare address of the descriptor.
+ */
+struct s3c64xx_dma_buff {
+ struct s3c64xx_dma_buff *next;
+
+ void *pw;
+ struct pl080_lli *lli;
+ dma_addr_t lli_dma;
+};
+
+struct s3c64xx_dmac;
+
+struct s3c2410_dma_chan {
+ unsigned char number; /* number of this dma channel */
+ unsigned char in_use; /* channel allocated */
+ unsigned char bit; /* bit for enable/disable/etc */
+ unsigned char hw_width;
+ unsigned char peripheral;
+
+ unsigned int flags;
+ enum s3c2410_dmasrc source;
+
+
+ dma_addr_t dev_addr;
+
+ struct s3c2410_dma_client *client;
+ struct s3c64xx_dmac *dmac; /* pointer to controller */
+
+ void __iomem *regs;
+
+ /* cdriver callbacks */
+ s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */
+ s3c2410_dma_opfn_t op_fn; /* channel op callback */
+
+ /* buffer list and information */
+ struct s3c64xx_dma_buff *curr; /* current dma buffer */
+ struct s3c64xx_dma_buff *next; /* next buffer to load */
+ struct s3c64xx_dma_buff *end; /* end of queue */
+
+ /* note, when channel is running in circular mode, curr is the
+ * first buffer enqueued, end is the last and curr is where the
+ * last buffer-done event is set-at. The buffers are not freed
+ * and the last buffer hardware descriptor points back to the
+ * first.
+ */
+};
+
+#include <plat/dma-core.h>
#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE)
#define IRQ_EINT(x) S3C_EINT(x)
+#define IRQ_EINT_BIT(x) ((x) - S3C_EINT(0))
/* Next the external interrupt groups. These are similar to the IRQ_EINT(x)
* that they are sourced from the GPIO pins but with a different scheme for
--- /dev/null
+/* linux/arch/arm/plat-s3c64xx/include/plat/pm-core.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - PM core support for arch/arm/plat-s3c/pm.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <plat/regs-gpio.h>
+
+static inline void s3c_pm_debug_init_uart(void)
+{
+ u32 tmp = __raw_readl(S3C_PCLK_GATE);
+
+ /* As a note, since the S3C64XX UARTs generally have multiple
+ * clock sources, we simply enable PCLK at the moment and hope
+ * that the resume settings for the UART are suitable for the
+ * use with PCLK.
+ */
+
+ tmp |= S3C_CLKCON_PCLK_UART0;
+ tmp |= S3C_CLKCON_PCLK_UART1;
+ tmp |= S3C_CLKCON_PCLK_UART2;
+ tmp |= S3C_CLKCON_PCLK_UART3;
+
+ __raw_writel(tmp, S3C_PCLK_GATE);
+ udelay(10);
+}
+
+static inline void s3c_pm_arch_prepare_irqs(void)
+{
+ /* VIC should have already been taken care of */
+
+ /* clear any pending EINT0 interrupts */
+ __raw_writel(__raw_readl(S3C64XX_EINT0PEND), S3C64XX_EINT0PEND);
+}
+
+static inline void s3c_pm_arch_stop_clocks(void)
+{
+}
+
+static inline void s3c_pm_arch_show_resume_irqs(void)
+{
+}
+
+/* make these defines, we currently do not have any need to change
+ * the IRQ wake controls depending on the CPU we are running on */
+
+#define s3c_irqwake_eintallow ((1 << 28) - 1)
+#define s3c_irqwake_intallow (0)
+
+static inline void s3c_pm_arch_update_uart(void __iomem *regs,
+ struct pm_uart_save *save)
+{
+ u32 ucon = __raw_readl(regs + S3C2410_UCON);
+ u32 ucon_clk = ucon & S3C6400_UCON_CLKMASK;
+ u32 save_clk = save->ucon & S3C6400_UCON_CLKMASK;
+ u32 new_ucon;
+ u32 delta;
+
+ /* S3C64XX UART blocks only support level interrupts, so ensure that
+ * when we restore unused UART blocks we force the level interrupt
+ * settigs. */
+ save->ucon |= S3C2410_UCON_TXILEVEL | S3C2410_UCON_RXILEVEL;
+
+ /* We have a constraint on changing the clock type of the UART
+ * between UCLKx and PCLK, so ensure that when we restore UCON
+ * that the CLK field is correctly modified if the bootloader
+ * has changed anything.
+ */
+ if (ucon_clk != save_clk) {
+ new_ucon = save->ucon;
+ delta = ucon_clk ^ save_clk;
+
+ /* change from UCLKx => wrong PCLK,
+ * either UCLK can be tested for by a bit-test
+ * with UCLK0 */
+ if (ucon_clk & S3C6400_UCON_UCLK0 &&
+ !(save_clk & S3C6400_UCON_UCLK0) &&
+ delta & S3C6400_UCON_PCLK2) {
+ new_ucon &= ~S3C6400_UCON_UCLK0;
+ } else if (delta == S3C6400_UCON_PCLK2) {
+ /* as an precaution, don't change from
+ * PCLK2 => PCLK or vice-versa */
+ new_ucon ^= S3C6400_UCON_PCLK2;
+ }
+
+ S3C_PMDBG("ucon change %04x => %04x (save=%04x)\n",
+ ucon, new_ucon, save->ucon);
+ save->ucon = new_ucon;
+ }
+}
#define S3C_HCLK_GATE S3C_CLKREG(0x30)
#define S3C_PCLK_GATE S3C_CLKREG(0x34)
#define S3C_SCLK_GATE S3C_CLKREG(0x38)
+#define S3C_MEM0_GATE S3C_CLKREG(0x3C)
/* CLKDIV0 */
#define S3C6400_CLKDIV0_MFC_MASK (0xf << 28)
/* Common init code for S3C6400 related SoCs */
extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c6400_register_clocks(void);
+extern void s3c6400_register_clocks(unsigned armclk_divlimit);
extern void s3c6400_setup_clocks(void);
#ifdef CONFIG_CPU_S3C6400
extern int s3c6400_init(void);
+extern void s3c6400_init_irq(void);
extern void s3c6400_map_io(void);
extern void s3c6400_init_clocks(int xtal);
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/sysdev.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <mach/map.h>
#include <plat/cpu.h>
+#include <plat/pm.h>
#define eint_offset(irq) ((irq) - IRQ_EINT(0))
#define eint_irq_to_bit(irq) (1 << eint_offset(irq))
.mask_ack = s3c_irq_eint_maskack,
.ack = s3c_irq_eint_ack,
.set_type = s3c_irq_eint_set_type,
+ .set_wake = s3c_irqext_wake,
};
/* s3c_irq_demux_eint
--- /dev/null
+/* arch/arm/plat-s3c64xx/irq-pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Interrupt handling Power Management
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sysdev.h>
+#include <linux/interrupt.h>
+#include <linux/serial_core.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/regs-serial.h>
+#include <plat/regs-timer.h>
+#include <plat/regs-gpio.h>
+#include <plat/cpu.h>
+#include <plat/pm.h>
+
+/* We handled all the IRQ types in this code, to save having to make several
+ * small files to handle each different type separately. Having the EINT_GRP
+ * code here shouldn't be as much bloat as the IRQ table space needed when
+ * they are enabled. The added benefit is we ensure that these registers are
+ * in the same state as we suspended.
+ */
+
+static struct sleep_save irq_save[] = {
+ SAVE_ITEM(S3C64XX_PRIORITY),
+ SAVE_ITEM(S3C64XX_EINT0CON0),
+ SAVE_ITEM(S3C64XX_EINT0CON1),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON0),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON1),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON2),
+ SAVE_ITEM(S3C64XX_EINT0FLTCON3),
+ SAVE_ITEM(S3C64XX_EINT0MASK),
+ SAVE_ITEM(S3C64XX_TINT_CSTAT),
+};
+
+static struct irq_grp_save {
+ u32 fltcon;
+ u32 con;
+ u32 mask;
+} eint_grp_save[5];
+
+static u32 irq_uart_mask[CONFIG_SERIAL_SAMSUNG_UARTS];
+
+static int s3c64xx_irq_pm_suspend(struct sys_device *dev, pm_message_t state)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: suspending IRQs\n", __func__);
+
+ s3c_pm_do_save(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ irq_uart_mask[i] = __raw_readl(S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ grp->con = __raw_readl(S3C64XX_EINT12CON + (i * 4));
+ grp->mask = __raw_readl(S3C64XX_EINT12MASK + (i * 4));
+ grp->fltcon = __raw_readl(S3C64XX_EINT12FLTCON + (i * 4));
+ }
+
+ return 0;
+}
+
+static int s3c64xx_irq_pm_resume(struct sys_device *dev)
+{
+ struct irq_grp_save *grp = eint_grp_save;
+ int i;
+
+ S3C_PMDBG("%s: resuming IRQs\n", __func__);
+
+ s3c_pm_do_restore(irq_save, ARRAY_SIZE(irq_save));
+
+ for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++)
+ __raw_writel(irq_uart_mask[i], S3C_VA_UARTx(i) + S3C64XX_UINTM);
+
+ for (i = 0; i < ARRAY_SIZE(eint_grp_save); i++, grp++) {
+ __raw_writel(grp->con, S3C64XX_EINT12CON + (i * 4));
+ __raw_writel(grp->mask, S3C64XX_EINT12MASK + (i * 4));
+ __raw_writel(grp->fltcon, S3C64XX_EINT12FLTCON + (i * 4));
+ }
+
+ S3C_PMDBG("%s: IRQ configuration restored\n", __func__);
+ return 0;
+}
+
+static struct sysdev_driver s3c64xx_irq_driver = {
+ .suspend = s3c64xx_irq_pm_suspend,
+ .resume = s3c64xx_irq_pm_resume,
+};
+
+static int __init s3c64xx_irq_pm_init(void)
+{
+ return sysdev_driver_register(&s3c64xx_sysclass, &s3c64xx_irq_driver);
+}
+
+arch_initcall(s3c64xx_irq_pm_init);
+
#include <linux/kernel.h>
#include <linux/interrupt.h>
+#include <linux/serial_core.h>
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/hardware/vic.h>
#include <mach/map.h>
+#include <plat/regs-serial.h>
#include <plat/regs-timer.h>
#include <plat/cpu.h>
}
/* UART interrupt registers, not worth adding to seperate include header */
-#define S3C64XX_UINTP 0x30
-#define S3C64XX_UINTSP 0x34
-#define S3C64XX_UINTM 0x38
static void s3c_irq_uart_mask(unsigned int irq)
{
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
/* initialise the pair of VICs */
- vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid);
- vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid);
+ vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid, 0);
+ vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid, 0);
/* add the timer sub-irqs */
--- /dev/null
+/* linux/arch/arm/plat-s3c64xx/pm.c
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU PM support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/serial_core.h>
+#include <linux/io.h>
+
+#include <mach/map.h>
+
+#include <plat/pm.h>
+#include <plat/regs-sys.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-clock.h>
+#include <plat/regs-syscon-power.h>
+#include <plat/regs-gpio-memport.h>
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+#include <plat/gpio-bank-n.h>
+
+void s3c_pm_debug_smdkled(u32 set, u32 clear)
+{
+ unsigned long flags;
+ u32 reg;
+
+ local_irq_save(flags);
+ reg = __raw_readl(S3C64XX_GPNCON);
+ reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) |
+ S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15));
+ reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) |
+ S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15);
+ __raw_writel(reg, S3C64XX_GPNCON);
+
+ reg = __raw_readl(S3C64XX_GPNDAT);
+ reg &= ~(clear << 12);
+ reg |= set << 12;
+ __raw_writel(reg, S3C64XX_GPNDAT);
+
+ local_irq_restore(flags);
+}
+#endif
+
+static struct sleep_save core_save[] = {
+ SAVE_ITEM(S3C_APLL_LOCK),
+ SAVE_ITEM(S3C_MPLL_LOCK),
+ SAVE_ITEM(S3C_EPLL_LOCK),
+ SAVE_ITEM(S3C_CLK_SRC),
+ SAVE_ITEM(S3C_CLK_DIV0),
+ SAVE_ITEM(S3C_CLK_DIV1),
+ SAVE_ITEM(S3C_CLK_DIV2),
+ SAVE_ITEM(S3C_CLK_OUT),
+ SAVE_ITEM(S3C_HCLK_GATE),
+ SAVE_ITEM(S3C_PCLK_GATE),
+ SAVE_ITEM(S3C_SCLK_GATE),
+ SAVE_ITEM(S3C_MEM0_GATE),
+
+ SAVE_ITEM(S3C_EPLL_CON1),
+ SAVE_ITEM(S3C_EPLL_CON0),
+
+ SAVE_ITEM(S3C64XX_MEM0DRVCON),
+ SAVE_ITEM(S3C64XX_MEM1DRVCON),
+
+#ifndef CONFIG_CPU_FREQ
+ SAVE_ITEM(S3C_APLL_CON),
+ SAVE_ITEM(S3C_MPLL_CON),
+#endif
+};
+
+static struct sleep_save misc_save[] = {
+ SAVE_ITEM(S3C64XX_AHB_CON0),
+ SAVE_ITEM(S3C64XX_AHB_CON1),
+ SAVE_ITEM(S3C64XX_AHB_CON2),
+
+ SAVE_ITEM(S3C64XX_SPCON),
+
+ SAVE_ITEM(S3C64XX_MEM0CONSTOP),
+ SAVE_ITEM(S3C64XX_MEM1CONSTOP),
+ SAVE_ITEM(S3C64XX_MEM0CONSLP0),
+ SAVE_ITEM(S3C64XX_MEM0CONSLP1),
+ SAVE_ITEM(S3C64XX_MEM1CONSLP),
+};
+
+void s3c_pm_configure_extint(void)
+{
+ __raw_writel(s3c_irqwake_eintmask, S3C64XX_EINT_MASK);
+}
+
+void s3c_pm_restore_core(void)
+{
+ __raw_writel(0, S3C64XX_EINT_MASK);
+
+ s3c_pm_debug_smdkled(1 << 2, 0);
+
+ s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
+ s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
+}
+
+void s3c_pm_save_core(void)
+{
+ s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
+ s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
+}
+
+/* since both s3c6400 and s3c6410 share the same sleep pm calls, we
+ * put the per-cpu code in here until any new cpu comes along and changes
+ * this.
+ */
+
+#include <plat/regs-gpio.h>
+
+static void s3c64xx_cpu_suspend(void)
+{
+ unsigned long tmp;
+
+ /* set our standby method to sleep */
+
+ tmp = __raw_readl(S3C64XX_PWR_CFG);
+ tmp &= ~S3C64XX_PWRCFG_CFG_WFI_MASK;
+ tmp |= S3C64XX_PWRCFG_CFG_WFI_SLEEP;
+ __raw_writel(tmp, S3C64XX_PWR_CFG);
+
+ /* clear any old wakeup */
+
+ __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT),
+ S3C64XX_WAKEUP_STAT);
+
+ /* set the LED state to 0110 over sleep */
+ s3c_pm_debug_smdkled(3 << 1, 0xf);
+
+ /* issue the standby signal into the pm unit. Note, we
+ * issue a write-buffer drain just in case */
+
+ tmp = 0;
+
+ asm("b 1f\n\t"
+ ".align 5\n\t"
+ "1:\n\t"
+ "mcr p15, 0, %0, c7, c10, 5\n\t"
+ "mcr p15, 0, %0, c7, c10, 4\n\t"
+ "mcr p15, 0, %0, c7, c0, 4" :: "r" (tmp));
+
+ /* we should never get past here */
+
+ panic("sleep resumed to originator?");
+}
+
+static void s3c64xx_pm_prepare(void)
+{
+ /* store address of resume. */
+ __raw_writel(virt_to_phys(s3c_cpu_resume), S3C64XX_INFORM0);
+
+ /* ensure previous wakeup state is cleared before sleeping */
+ __raw_writel(__raw_readl(S3C64XX_WAKEUP_STAT), S3C64XX_WAKEUP_STAT);
+}
+
+static int s3c64xx_pm_init(void)
+{
+ pm_cpu_prep = s3c64xx_pm_prepare;
+ pm_cpu_sleep = s3c64xx_cpu_suspend;
+ pm_uart_udivslot = 1;
+ return 0;
+}
+
+arch_initcall(s3c64xx_pm_init);
.sources = &clk_src_mpll,
};
+static unsigned int armclk_mask;
+
+static unsigned long s3c64xx_clk_arm_get_rate(struct clk *clk)
+{
+ unsigned long rate = clk_get_rate(clk->parent);
+ u32 clkdiv;
+
+ /* divisor mask starts at bit0, so no need to shift */
+ clkdiv = __raw_readl(S3C_CLK_DIV0) & armclk_mask;
+
+ return rate / (clkdiv + 1);
+}
+
+static unsigned long s3c64xx_clk_arm_round_rate(struct clk *clk,
+ unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
+
+ if (parent < rate)
+ return rate;
+
+ div = (parent / rate) - 1;
+ if (div > armclk_mask)
+ div = armclk_mask;
+
+ return parent / (div + 1);
+}
+
+static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned long parent = clk_get_rate(clk->parent);
+ u32 div;
+ u32 val;
+
+ if (rate < parent / (armclk_mask + 1))
+ return -EINVAL;
+
+ rate = clk_round_rate(clk, rate);
+ div = clk_get_rate(clk->parent) / rate;
+
+ val = __raw_readl(S3C_CLK_DIV0);
+ val &= armclk_mask;
+ val |= (div - 1);
+ __raw_writel(val, S3C_CLK_DIV0);
+
+ return 0;
+
+}
+
+static struct clk clk_arm = {
+ .name = "armclk",
+ .id = -1,
+ .parent = &clk_mout_apll.clk,
+ .get_rate = s3c64xx_clk_arm_get_rate,
+ .set_rate = s3c64xx_clk_arm_set_rate,
+ .round_rate = s3c64xx_clk_arm_round_rate,
+};
+
static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk)
{
unsigned long rate = clk_get_rate(clk->parent);
.reg_divider = S3C_CLK_DIV2,
};
+static struct clk *clkset_camif_list[] = {
+ &clk_h2,
+};
+
+static struct clk_sources clkset_camif = {
+ .sources = clkset_camif_list,
+ .nr_sources = ARRAY_SIZE(clkset_camif_list),
+};
+
+static struct clksrc_clk clk_camif = {
+ .clk = {
+ .name = "camera",
+ .id = -1,
+ .ctrlbit = S3C_CLKCON_SCLK_CAM,
+ .enable = s3c64xx_sclk_ctrl,
+ .set_parent = s3c64xx_setparent_clksrc,
+ .get_rate = s3c64xx_getrate_clksrc,
+ .set_rate = s3c64xx_setrate_clksrc,
+ .round_rate = s3c64xx_roundrate_clksrc,
+ },
+ .shift = 0,
+ .mask = 0,
+ .sources = &clkset_camif,
+ .divider_shift = S3C6400_CLKDIV0_CAM_SHIFT,
+ .reg_divider = S3C_CLK_DIV0,
+};
+
/* Clock initialisation code */
static struct clksrc_clk *init_parents[] = {
&clk_audio0,
&clk_audio1,
&clk_irda,
+ &clk_camif,
};
static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk)
clk_fout_epll.rate = epll;
clk_fout_apll.rate = apll;
+ clk_h2.rate = hclk2;
clk_h.rate = hclk;
clk_p.rate = pclk;
clk_f.rate = fclk;
&clk_audio0.clk,
&clk_audio1.clk,
&clk_irda.clk,
+ &clk_camif.clk,
+ &clk_arm,
};
-void __init s3c6400_register_clocks(void)
+/**
+ * s3c6400_register_clocks - register clocks for s3c6400 and above
+ * @armclk_divlimit: Divisor mask for ARMCLK
+ *
+ * Register the clocks for the S3C6400 and above SoC range, such
+ * as ARMCLK and the clocks which have divider chains attached.
+ *
+ * This call does not setup the clocks, which is left to the
+ * s3c6400_setup_clocks() call which may be needed by the cpufreq
+ * or resume code to re-set the clocks if the bootloader has changed
+ * them.
+ */
+void __init s3c6400_register_clocks(unsigned armclk_divlimit)
{
struct clk *clkp;
int ret;
int ptr;
+ armclk_mask = armclk_divlimit;
+
for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
clkp = clks[ptr];
ret = s3c24xx_register_clock(clkp);
--- /dev/null
+/* linux/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/gpio.h>
+#include <plat/gpio-cfg.h>
+
+void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S3C64XX_GPG(2 + width);
+
+ /* Set all the necessary GPG pins to special-function 0 */
+ for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2));
+}
+
+void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+ unsigned int gpio;
+ unsigned int end;
+
+ end = S3C64XX_GPH(2 + width);
+
+ /* Set all the necessary GPG pins to special-function 0 */
+ for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) {
+ s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+ s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+ }
+
+ s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
+ s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
+}
--- /dev/null
+/* linux/0arch/arm/plat-s3c64xx/sleep.S
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ * http://armlinux.simtec.co.uk/
+ *
+ * S3C64XX CPU sleep code
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <mach/map.h>
+
+#undef S3C64XX_VA_GPIO
+#define S3C64XX_VA_GPIO (0x0)
+
+#include <plat/regs-gpio.h>
+#include <plat/gpio-bank-n.h>
+
+#define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT))
+
+ .text
+
+ /* s3c_cpu_save
+ *
+ * Save enough processor state to allow the restart of the pm.c
+ * code after resume.
+ *
+ * entry:
+ * r0 = pointer to the save block
+ */
+
+ENTRY(s3c_cpu_save)
+ stmfd sp!, { r4 - r12, lr }
+
+ mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mrc p15, 0, r5, c3, c0, 0 @ Domain ID
+ mrc p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
+ mrc p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
+ mrc p15, 0, r8, c2, c0, 2 @ Translation Table Control
+ mrc p15, 0, r9, c1, c0, 0 @ Control register
+ mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r11, c1, c0, 2 @ Co-processor access controls
+
+ stmia r0, { r4 - r13 } @ Save CP registers and SP
+
+ @@ save our state to ram
+ bl s3c_pm_cb_flushcache
+
+ @@ call final suspend code
+ ldr r0, =pm_cpu_sleep
+ ldr pc, [r0]
+
+ @@ return to the caller, after the MMU is turned on.
+ @@ restore the last bits of the stack and return.
+resume_with_mmu:
+ ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save
+
+ .data
+
+ /* the next bit is code, but it requires easy access to the
+ * s3c_sleep_save_phys data before the MMU is switched on, so
+ * we store the code that needs this variable in the .data where
+ * the value can be written to (the .text segment is RO).
+ */
+
+ .global s3c_sleep_save_phys
+s3c_sleep_save_phys:
+ .word 0
+
+ /* Sleep magic, the word before the resume entry point so that the
+ * bootloader can check for a resumeable image. */
+
+ .word 0x2bedf00d
+
+ /* s3c_cpu_reusme
+ *
+ * This is the entry point, stored by whatever method the bootloader
+ * requires to get the kernel runnign again. This code expects to be
+ * entered with no caches live and the MMU disabled. It will then
+ * restore the MMU and other basic CP registers saved and restart
+ * the kernel C code to finish the resume code.
+ */
+
+ENTRY(s3c_cpu_resume)
+ msr cpsr_c, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
+ ldr r2, =LL_UART /* for debug */
+
+#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
+ /* Initialise the GPIO state if we are debugging via the SMDK LEDs,
+ * as the uboot version supplied resets these to inputs during the
+ * resume checks.
+ */
+
+ ldr r3, =S3C64XX_PA_GPIO
+ ldr r0, [ r3, #S3C64XX_GPNCON ]
+ bic r0, r0, #(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | \
+ S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15))
+ orr r0, r0, #(S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | \
+ S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15))
+ str r0, [ r3, #S3C64XX_GPNCON ]
+
+ ldr r0, [ r3, #S3C64XX_GPNDAT ]
+ bic r0, r0, #0xf << 12 @ GPN12..15
+ orr r0, r0, #1 << 15 @ GPN15
+ str r0, [ r3, #S3C64XX_GPNDAT ]
+#endif
+
+ /* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
+ * are thoroughly cleaned just in case the bootloader didn't do it
+ * for us. */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c14, 0 @ clean+invalidate D cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
+ mcr p15, 0, r0, c7, c15, 0 @ clean+invalidate cache
+ mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+ @@mcr p15, 0, r0, c8, c7, 0 @ invalidate I + D TLBs
+ @@mcr p15, 0, r0, c7, c7, 0 @ Invalidate I + D caches
+
+ ldr r0, s3c_sleep_save_phys
+ ldmia r0, { r4 - r13 }
+
+ mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
+ mcr p15, 0, r5, c3, c0, 0 @ Domain ID
+ mcr p15, 0, r6, c2, c0, 0 @ Translation Table BASE0
+ mcr p15, 0, r7, c2, c0, 1 @ Translation Table BASE1
+ mcr p15, 0, r8, c2, c0, 2 @ Translation Table Control
+ mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register
+
+ mov r0, #0 @ restore copro access controls
+ mcr p15, 0, r11, c1, c0, 2 @ Co-processor access controls
+ mcr p15, 0, r0, c7, c5, 4
+
+ ldr r2, =resume_with_mmu
+ mcr p15, 0, r9, c1, c0, 0 /* turn mmu back on */
+ nop
+ mov pc, r2 /* jump back */
+
+ .end
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Mar 23 20:09:01 2009
+# Last update: Fri May 29 10:14:20 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
-palmt650 MACH_PALMT650 PALMT650 909
+treo650 MACH_TREO650 TREO650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
vpac270 MACH_VPAC270 VPAC270 1227
rd129 MACH_RD129 RD129 1228
htcwizard MACH_HTCWIZARD HTCWIZARD 1229
-xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230
+treo680 MACH_TREO680 TREO680 1230
tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
zylonite MACH_ZYLONITE ZYLONITE 1233
gene1270 MACH_GENE1270 GENE1270 1234
cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
app3xx MACH_APP3XX APP3XX 1419
sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
-palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421
-palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422
-palmtreo750 MACH_PALMTREO750 PALMTREO750 1423
-palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424
+treo700p MACH_TREO700P TREO700P 1421
+treo700w MACH_TREO700W TREO700W 1422
+treo750 MACH_TREO750 TREO750 1423
+treo755p MACH_TREO755P TREO755P 1424
ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
sarge MACH_SARGE SARGE 1426
a696 MACH_A696 A696 1427
csb637xo MACH_CSB637XO CSB637XO 1730
evisiong MACH_EVISIONG EVISIONG 1731
stmp37xx MACH_STMP37XX STMP37XX 1732
-stmp378x MACH_STMP38XX STMP38XX 1733
+stmp378x MACH_STMP378X STMP378X 1733
tnt MACH_TNT TNT 1734
tbxt MACH_TBXT TBXT 1735
playmate MACH_PLAYMATE PLAYMATE 1736
tavorevb MACH_TAVOREVB TAVOREVB 1827
saar MACH_SAAR SAAR 1828
deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829
-at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
+at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830
linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
hit_b0 MACH_HIT_B0 HIT_B0 1832
adx_rmu MACH_ADX_RMU ADX_RMU 1833
at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142
spc300 MACH_SPC300 SPC300 2143
eko MACH_EKO EKO 2144
+ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145
+ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146
+m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147
+str9104nas MACH_STAR9104NAS STAR9104NAS 2148
+pca100 MACH_PCA100 PCA100 2149
+z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150
+hipox MACH_HIPOX HIPOX 2151
+omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152
+bm150r MACH_BM150R BM150R 2153
+tbone MACH_TBONE TBONE 2154
+merlin MACH_MERLIN MERLIN 2155
+falcon MACH_FALCON FALCON 2156
+davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157
+s5p6440 MACH_S5P6440 S5P6440 2158
+at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159
+omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160
+lpc313x MACH_LPC313X LPC313X 2161
+magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162
+magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163
+magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164
+meesc MACH_MEESC MEESC 2165
+otc570 MACH_OTC570 OTC570 2166
+bcu2412 MACH_BCU2412 BCU2412 2167
+beacon MACH_BEACON BEACON 2168
+actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169
+e4430 MACH_E4430 E4430 2170
+ql300 MACH_QL300 QL300 2171
+btmavb101 MACH_BTMAVB101 BTMAVB101 2172
+btmawb101 MACH_BTMAWB101 BTMAWB101 2173
+sq201 MACH_SQ201 SQ201 2174
+quatro45xx MACH_QUATRO45XX QUATRO45XX 2175
+openpad MACH_OPENPAD OPENPAD 2176
+tx25 MACH_TX25 TX25 2177
+omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178
+htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179
+lal43 MACH_LAL43 LAL43 2181
+htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182
+anw6410 MACH_ANW6410 ANW6410 2183
+htcprophet MACH_HTCPROPHET HTCPROPHET 2185
+cfa_10022 MACH_CFA_10022 CFA_10022 2186
+imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187
+px2imx27 MACH_PX2IMX27 PX2IMX27 2188
+stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189
+dvs10 MACH_DVS10 DVS10 2190
+portuxg20 MACH_PORTUXG20 PORTUXG20 2191
+arm_spv MACH_ARM_SPV ARM_SPV 2192
+smdkc110 MACH_SMDKC110 SMDKC110 2193
+cabespresso MACH_CABESPRESSO CABESPRESSO 2194
+hmc800 MACH_HMC800 HMC800 2195
+sholes MACH_SHOLES SHOLES 2196
+btmxc31 MACH_BTMXC31 BTMXC31 2197
+dt501 MACH_DT501 DT501 2198
+ktx MACH_KTX KTX 2199
+omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200
+netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201
+netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202
+d2net_v2 MACH_D2NET_V2 D2NET_V2 2203
+net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204
+net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205
+net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206
+endb2443 MACH_ENDB2443 ENDB2443 2207
+inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208
+tros MACH_TROS TROS 2209
+pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210
+ofsp8 MACH_OFSP8 OFSP8 2211
+at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212
+guf_cupid MACH_GUF_CUPID GUF_CUPID 2213
+eab1r MACH_EAB1R EAB1R 2214
+desirec MACH_DESIREC DESIREC 2215
+cordoba MACH_CORDOBA CORDOBA 2216
+irvine MACH_IRVINE IRVINE 2217
+sff772 MACH_SFF772 SFF772 2218
+pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219
+pc7302 MACH_PC7302 PC7302 2220
+bip6000 MACH_BIP6000 BIP6000 2221
+silvermoon MACH_SILVERMOON SILVERMOON 2222
+vc0830 MACH_VC0830 VC0830 2223
+dt430 MACH_DT430 DT430 2224
+ji42pf MACH_JI42PF JI42PF 2225
+gnet_ksm MACH_GNET_KSM GNET_KSM 2226
+gnet_sgm MACH_GNET_SGM GNET_SGM 2227
+gnet_sgr MACH_GNET_SGR GNET_SGR 2228
+omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229
+pnp MACH_PNP PNP 2230
+ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231
+ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232
+sas_c MACH_SAS_C SAS_C 2233
+vma2315 MACH_VMA2315 VMA2315 2234
+vcs MACH_VCS VCS 2235
+spear600 MACH_SPEAR600 SPEAR600 2236
+spear300 MACH_SPEAR300 SPEAR300 2237
+spear1300 MACH_SPEAR1300 SPEAR1300 2238
+lilly1131 MACH_LILLY1131 LILLY1131 2239
+arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240
+mapphone MACH_MAPPHONE MAPPHONE 2241
+legend MACH_LEGEND LEGEND 2242
+salsa MACH_SALSA SALSA 2243
+lounge MACH_LOUNGE LOUNGE 2244
+vision MACH_VISION VISION 2245
+vmb20 MACH_VMB20 VMB20 2246
+hy2410 MACH_HY2410 HY2410 2247
+hy9315 MACH_HY9315 HY9315 2248
+bullwinkle MACH_BULLWINKLE BULLWINKLE 2249
+arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250
+vs_v210 MACH_VS_V210 VS_V210 2252
+vs_v212 MACH_VS_V212 VS_V212 2253
+hmt MACH_HMT HMT 2254
+suen3 MACH_SUEN3 SUEN3 2255
+vesper MACH_VESPER VESPER 2256
+str9 MACH_STR9 STR9 2257
+omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
+simcom MACH_SIMCOM SIMCOM 2259
+mcwebio MACH_MCWEBIO MCWEBIO 2260
beq no_old_VFP_process
VFPFSTMIA r4, r5 @ save the working registers
VFPFMRX r5, FPSCR @ current status
+#ifndef CONFIG_CPU_FEROCEON
tst r1, #FPEXC_EX @ is there additional state to save?
beq 1f
VFPFMRX r6, FPINST @ FPINST (only if FPEXC.EX is set)
beq 1f
VFPFMRX r8, FPINST2 @ FPINST2 if needed (and present)
1:
+#endif
stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2
@ and point r4 at the word at the
@ start of the register dump
VFPFLDMIA r10, r5 @ reload the working registers while
@ FPEXC is in a safe state
ldmia r10, {r1, r5, r6, r8} @ load FPEXC, FPSCR, FPINST, FPINST2
+#ifndef CONFIG_CPU_FEROCEON
tst r1, #FPEXC_EX @ is there additional state to restore?
beq 1f
VFPFMXR FPINST, r6 @ restore FPINST (only if FPEXC.EX is set)
beq 1f
VFPFMXR FPINST2, r8 @ FPINST2 if needed (and present)
1:
+#endif
VFPFMXR FPSCR, r5 @ restore status
check_for_exception:
}
if (fpexc & FPEXC_EX) {
+#ifndef CONFIG_CPU_FEROCEON
/*
* Asynchronous exception. The instruction is read from FPINST
* and the interrupted instruction has to be restarted.
*/
trigger = fmrx(FPINST);
regs->ARM_pc -= 4;
+#endif
} else if (!(fpexc & FPEXC_DEX)) {
/*
* Illegal combination of bits. It can be caused by an
#include <asm/unaligned.h>
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define __NR_dup3 363
#define __NR_pipe2 364
#define __NR_inotify_init1 365
+#define __NR_preadv 366
+#define __NR_pwritev 367
-#define __NR_syscall 366
+#define __NR_syscall 368
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
--- /dev/null
+vmlinux.lds
#define strncmp __inline_strncmp
#include <asm/string.h>
-#undef strncmp
-
#include <linux/module.h>
+#undef strncmp
int strncmp(const char *cs, const char *ct, size_t count)
{
.long _sys_dup3
.long _sys_pipe2
.long _sys_inotify_init1 /* 365 */
+ .long _sys_preadv
+ .long _sys_pwritev
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
#ifndef __H8300_FLAT_H__
#define __H8300_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
#ifndef __ASM_M32R_FLAT_H
#define __ASM_M32R_FLAT_H
-#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_set_persistent(relval, p) 0
#ifndef __M68KNOMMU_FLAT_H__
#define __M68KNOMMU_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
default "0x80000000" if PPC_PREP || PPC_8xx
default "0xc0000000"
+config CONSISTENT_SIZE_BOOL
+ bool "Set custom consistent memory pool size"
+ depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+ help
+ This option allows you to set the size of the
+ consistent memory pool. This pool of virtual memory
+ is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+ hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+ default "0x00200000" if NOT_COHERENT_CACHE
+
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:51 2008
+# Linux kernel version: 2.6.30-rc7
+# Mon May 25 14:53:25 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC601_SYNC_FIX=y
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
#
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_ANSLCD is not set
CONFIG_PMAC_RACKMETER=m
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
CONFIG_P54_COMMON=m
# CONFIG_P54_USB is not set
# CONFIG_P54_PCI is not set
+CONFIG_P54_LEDS=y
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+CONFIG_HERMES=m
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_APPLE_AIRPORT=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+CONFIG_PCI_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_ONETOUCH=m
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
* allocate the space "normally" and use the cache management functions
* to ensure it is consistent.
*/
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+struct device;
+extern void *__dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *handle, gfp_t gfp);
extern void __dma_free_coherent(size_t size, void *vaddr);
extern void __dma_sync(void *vaddr, size_t size, int direction);
extern void __dma_sync_page(struct page *page, unsigned long offset,
* Cache coherent cores.
*/
-#define __dma_alloc_coherent(gfp, size, handle) NULL
+#define __dma_alloc_coherent(dev, gfp, size, handle) NULL
#define __dma_free_coherent(size, addr) ((void)0)
#define __dma_sync(addr, size, rw) ((void)0)
#define __dma_sync_page(pg, off, sz, rw) ((void)0)
#ifndef _ASM_FIXMAP_H
#define _ASM_FIXMAP_H
-extern unsigned long FIXADDR_TOP;
-
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <asm/page.h>
#include <asm/kmap_types.h>
#endif
+#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
+
/*
* Here we define all the compile-time 'special' virtual
* addresses. The point is to have a constant address at
extern unsigned long va_to_phys(unsigned long address);
extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
+extern unsigned long ioremap_bot;
#ifdef CONFIG_44x
extern int icache_44x_need_flush;
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+/*
+ * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
+ * value (for now) on others, from where we can start layout kernel
+ * virtual space that goes below PKMAP and FIXMAP
+ */
+#ifdef CONFIG_HIGHMEM
+#define KVIRT_TOP PKMAP_BASE
+#else
+#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */
+#endif
+
+/*
+ * ioremap_bot starts at that address. Early ioremaps move down from there,
+ * until mem_init() at which point this becomes the top of the vmalloc
+ * and ioremap space
+ */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
+#else
+#define IOREMAP_TOP KVIRT_TOP
+#endif
+
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
+ * current 16MB value just means that there will be a 64MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
{
void *ret;
#ifdef CONFIG_NOT_COHERENT_CACHE
- ret = __dma_alloc_coherent(size, dma_handle, flag);
+ ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
if (ret == NULL)
return NULL;
*dma_handle += get_dma_direct_offset(dev);
memcpy_64.o usercopy_64.o mem_64.o string.o
obj-$(CONFIG_XMON) += sstep.o
obj-$(CONFIG_KPROBES) += sstep.o
-obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o
+++ /dev/null
-/*
- * PowerPC version derived from arch/arm/mm/consistent.c
- * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
- *
- * Copyright (C) 2000 Russell King
- *
- * Consistent memory allocators. Used for DMA devices that want to
- * share uncached memory with the processor core. The function return
- * is the virtual address and 'dma_handle' is the physical address.
- * Mostly stolen from the ARM port, with some changes for PowerPC.
- * -- Dan
- *
- * Reorganized to get rid of the arch-specific consistent_* functions
- * and provide non-coherent implementations for the DMA API. -Matt
- *
- * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
- * implementation. This is pulled straight from ARM and barely
- * modified. -Matt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/highmem.h>
-#include <linux/dma-mapping.h>
-#include <linux/vmalloc.h>
-
-#include <asm/tlbflush.h>
-
-/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
-{
- struct page *page;
- unsigned long order;
- int i;
- unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT;
- unsigned int array_size = nr_pages * sizeof(struct page *);
- struct page **pages;
- struct page *end;
- u64 mask = 0x00ffffff, limit; /* ISA default */
- struct vm_struct *area;
-
- BUG_ON(!mem_init_done);
- size = PAGE_ALIGN(size);
- limit = (mask + 1) & ~mask;
- if (limit && size >= limit) {
- printk(KERN_WARNING "coherent allocation too big (requested "
- "%#x mask %#Lx)\n", size, mask);
- return NULL;
- }
-
- order = get_order(size);
-
- if (mask != 0xffffffff)
- gfp |= GFP_DMA;
-
- page = alloc_pages(gfp, order);
- if (!page)
- goto no_page;
-
- end = page + (1 << order);
-
- /*
- * Invalidate any data that might be lurking in the
- * kernel direct-mapped region for device DMA.
- */
- {
- unsigned long kaddr = (unsigned long)page_address(page);
- memset(page_address(page), 0, size);
- flush_dcache_range(kaddr, kaddr + size);
- }
-
- split_page(page, order);
-
- /*
- * Set the "dma handle"
- */
- *handle = page_to_phys(page);
-
- area = get_vm_area_caller(size, VM_IOREMAP,
- __builtin_return_address(1));
- if (!area)
- goto out_free_pages;
-
- if (array_size > PAGE_SIZE) {
- pages = vmalloc(array_size);
- area->flags |= VM_VPAGES;
- } else {
- pages = kmalloc(array_size, GFP_KERNEL);
- }
- if (!pages)
- goto out_free_area;
-
- area->pages = pages;
- area->nr_pages = nr_pages;
-
- for (i = 0; i < nr_pages; i++)
- pages[i] = page + i;
-
- if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages))
- goto out_unmap;
-
- /*
- * Free the otherwise unused pages.
- */
- page += nr_pages;
- while (page < end) {
- __free_page(page);
- page++;
- }
-
- return area->addr;
-out_unmap:
- vunmap(area->addr);
- if (array_size > PAGE_SIZE)
- vfree(pages);
- else
- kfree(pages);
- goto out_free_pages;
-out_free_area:
- free_vm_area(area);
-out_free_pages:
- if (page)
- __free_pages(page, order);
-no_page:
- return NULL;
-}
-EXPORT_SYMBOL(__dma_alloc_coherent);
-
-/*
- * free a page as defined by the above mapping.
- */
-void __dma_free_coherent(size_t size, void *vaddr)
-{
- vfree(vaddr);
-
-}
-EXPORT_SYMBOL(__dma_free_coherent);
-
-/*
- * make an area consistent.
- */
-void __dma_sync(void *vaddr, size_t size, int direction)
-{
- unsigned long start = (unsigned long)vaddr;
- unsigned long end = start + size;
-
- switch (direction) {
- case DMA_NONE:
- BUG();
- case DMA_FROM_DEVICE:
- /*
- * invalidate only when cache-line aligned otherwise there is
- * the potential for discarding uncommitted data from the cache
- */
- if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
- flush_dcache_range(start, end);
- else
- invalidate_dcache_range(start, end);
- break;
- case DMA_TO_DEVICE: /* writeback only */
- clean_dcache_range(start, end);
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- flush_dcache_range(start, end);
- break;
- }
-}
-EXPORT_SYMBOL(__dma_sync);
-
-#ifdef CONFIG_HIGHMEM
-/*
- * __dma_sync_page() implementation for systems using highmem.
- * In this case, each page of a buffer must be kmapped/kunmapped
- * in order to have a virtual address for __dma_sync(). This must
- * not sleep so kmap_atomic()/kunmap_atomic() are used.
- *
- * Note: yes, it is possible and correct to have a buffer extend
- * beyond the first page.
- */
-static inline void __dma_sync_page_highmem(struct page *page,
- unsigned long offset, size_t size, int direction)
-{
- size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
- size_t cur_size = seg_size;
- unsigned long flags, start, seg_offset = offset;
- int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
- int seg_nr = 0;
-
- local_irq_save(flags);
-
- do {
- start = (unsigned long)kmap_atomic(page + seg_nr,
- KM_PPC_SYNC_PAGE) + seg_offset;
-
- /* Sync this buffer segment */
- __dma_sync((void *)start, seg_size, direction);
- kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
- seg_nr++;
-
- /* Calculate next buffer segment size */
- seg_size = min((size_t)PAGE_SIZE, size - cur_size);
-
- /* Add the segment size to our running total */
- cur_size += seg_size;
- seg_offset = 0;
- } while (seg_nr < nr_segs);
-
- local_irq_restore(flags);
-}
-#endif /* CONFIG_HIGHMEM */
-
-/*
- * __dma_sync_page makes memory consistent. identical to __dma_sync, but
- * takes a struct page instead of a virtual address
- */
-void __dma_sync_page(struct page *page, unsigned long offset,
- size_t size, int direction)
-{
-#ifdef CONFIG_HIGHMEM
- __dma_sync_page_highmem(page, offset, size, direction);
-#else
- unsigned long start = (unsigned long)page_address(page) + offset;
- __dma_sync((void *)start, size, direction);
-#endif
-}
-EXPORT_SYMBOL(__dma_sync_page);
obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
+obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
--- /dev/null
+/*
+ * PowerPC version derived from arch/arm/mm/consistent.c
+ * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * Consistent memory allocators. Used for DMA devices that want to
+ * share uncached memory with the processor core. The function return
+ * is the virtual address and 'dma_handle' is the physical address.
+ * Mostly stolen from the ARM port, with some changes for PowerPC.
+ * -- Dan
+ *
+ * Reorganized to get rid of the arch-specific consistent_* functions
+ * and provide non-coherent implementations for the DMA API. -Matt
+ *
+ * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
+ * implementation. This is pulled straight from ARM and barely
+ * modified. -Matt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/tlbflush.h>
+
+#include "mmu_decl.h"
+
+/*
+ * This address range defaults to a value that is safe for all
+ * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
+ * can be further configured for specific applications under
+ * the "Advanced Setup" menu. -Matt
+ */
+#define CONSISTENT_BASE (IOREMAP_TOP)
+#define CONSISTENT_END (CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE)
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+
+/*
+ * This is the page table (2MB) covering uncached, DMA consistent allocations
+ */
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ * struct vm_struct {
+ * struct vm_region region;
+ * unsigned long flags;
+ * struct page **pages;
+ * unsigned int nr_pages;
+ * unsigned long phys_addr;
+ * };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ * struct vm_region vmalloc_head = {
+ * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
+ * .vm_start = VMALLOC_START,
+ * .vm_end = VMALLOC_END,
+ * };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.) I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct ppc_vm_region {
+ struct list_head vm_list;
+ unsigned long vm_start;
+ unsigned long vm_end;
+};
+
+static struct ppc_vm_region consistent_head = {
+ .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
+ .vm_start = CONSISTENT_BASE,
+ .vm_end = CONSISTENT_END,
+};
+
+static struct ppc_vm_region *
+ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
+{
+ unsigned long addr = head->vm_start, end = head->vm_end - size;
+ unsigned long flags;
+ struct ppc_vm_region *c, *new;
+
+ new = kmalloc(sizeof(struct ppc_vm_region), gfp);
+ if (!new)
+ goto out;
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if ((addr + size) < addr)
+ goto nospc;
+ if ((addr + size) <= c->vm_start)
+ goto found;
+ addr = c->vm_end;
+ if (addr > end)
+ goto nospc;
+ }
+
+ found:
+ /*
+ * Insert this entry _before_ the one we found.
+ */
+ list_add_tail(&new->vm_list, &c->vm_list);
+ new->vm_start = addr;
+ new->vm_end = addr + size;
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ return new;
+
+ nospc:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ kfree(new);
+ out:
+ return NULL;
+}
+
+static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
+{
+ struct ppc_vm_region *c;
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if (c->vm_start == addr)
+ goto out;
+ }
+ c = NULL;
+ out:
+ return c;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ struct page *page;
+ struct ppc_vm_region *c;
+ unsigned long order;
+ u64 mask = ISA_DMA_THRESHOLD, limit;
+
+ if (dev) {
+ mask = dev->coherent_dma_mask;
+
+ /*
+ * Sanity check the DMA mask - it must be non-zero, and
+ * must be able to be satisfied by a DMA allocation.
+ */
+ if (mask == 0) {
+ dev_warn(dev, "coherent DMA mask is unset\n");
+ goto no_page;
+ }
+
+ if ((~mask) & ISA_DMA_THRESHOLD) {
+ dev_warn(dev, "coherent DMA mask %#llx is smaller "
+ "than system GFP_DMA mask %#llx\n",
+ mask, (unsigned long long)ISA_DMA_THRESHOLD);
+ goto no_page;
+ }
+ }
+
+
+ size = PAGE_ALIGN(size);
+ limit = (mask + 1) & ~mask;
+ if ((limit && size >= limit) ||
+ size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+ printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
+ size, mask);
+ return NULL;
+ }
+
+ order = get_order(size);
+
+ /* Might be useful if we ever have a real legacy DMA zone... */
+ if (mask != 0xffffffff)
+ gfp |= GFP_DMA;
+
+ page = alloc_pages(gfp, order);
+ if (!page)
+ goto no_page;
+
+ /*
+ * Invalidate any data that might be lurking in the
+ * kernel direct-mapped region for device DMA.
+ */
+ {
+ unsigned long kaddr = (unsigned long)page_address(page);
+ memset(page_address(page), 0, size);
+ flush_dcache_range(kaddr, kaddr + size);
+ }
+
+ /*
+ * Allocate a virtual address in the consistent mapping region.
+ */
+ c = ppc_vm_region_alloc(&consistent_head, size,
+ gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+ if (c) {
+ unsigned long vaddr = c->vm_start;
+ struct page *end = page + (1 << order);
+
+ split_page(page, order);
+
+ /*
+ * Set the "dma handle"
+ */
+ *handle = page_to_phys(page);
+
+ do {
+ SetPageReserved(page);
+ map_page(vaddr, page_to_phys(page),
+ pgprot_noncached(PAGE_KERNEL));
+ page++;
+ vaddr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ /*
+ * Free the otherwise unused pages.
+ */
+ while (page < end) {
+ __free_page(page);
+ page++;
+ }
+
+ return (void *)c->vm_start;
+ }
+
+ if (page)
+ __free_pages(page, order);
+ no_page:
+ return NULL;
+}
+EXPORT_SYMBOL(__dma_alloc_coherent);
+
+/*
+ * free a page as defined by the above mapping.
+ */
+void __dma_free_coherent(size_t size, void *vaddr)
+{
+ struct ppc_vm_region *c;
+ unsigned long flags, addr;
+
+ size = PAGE_ALIGN(size);
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
+ if (!c)
+ goto no_area;
+
+ if ((c->vm_end - c->vm_start) != size) {
+ printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+ __func__, c->vm_end - c->vm_start, size);
+ dump_stack();
+ size = c->vm_end - c->vm_start;
+ }
+
+ addr = c->vm_start;
+ do {
+ pte_t *ptep;
+ unsigned long pfn;
+
+ ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr),
+ addr),
+ addr),
+ addr);
+ if (!pte_none(*ptep) && pte_present(*ptep)) {
+ pfn = pte_pfn(*ptep);
+ pte_clear(&init_mm, addr, ptep);
+ if (pfn_valid(pfn)) {
+ struct page *page = pfn_to_page(pfn);
+
+ ClearPageReserved(page);
+ __free_page(page);
+ }
+ }
+ addr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+ list_del(&c->vm_list);
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+
+ kfree(c);
+ return;
+
+ no_area:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+ __func__, vaddr);
+ dump_stack();
+}
+EXPORT_SYMBOL(__dma_free_coherent);
+
+/*
+ * make an area consistent.
+ */
+void __dma_sync(void *vaddr, size_t size, int direction)
+{
+ unsigned long start = (unsigned long)vaddr;
+ unsigned long end = start + size;
+
+ switch (direction) {
+ case DMA_NONE:
+ BUG();
+ case DMA_FROM_DEVICE:
+ /*
+ * invalidate only when cache-line aligned otherwise there is
+ * the potential for discarding uncommitted data from the cache
+ */
+ if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+ flush_dcache_range(start, end);
+ else
+ invalidate_dcache_range(start, end);
+ break;
+ case DMA_TO_DEVICE: /* writeback only */
+ clean_dcache_range(start, end);
+ break;
+ case DMA_BIDIRECTIONAL: /* writeback and invalidate */
+ flush_dcache_range(start, end);
+ break;
+ }
+}
+EXPORT_SYMBOL(__dma_sync);
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * __dma_sync_page() implementation for systems using highmem.
+ * In this case, each page of a buffer must be kmapped/kunmapped
+ * in order to have a virtual address for __dma_sync(). This must
+ * not sleep so kmap_atomic()/kunmap_atomic() are used.
+ *
+ * Note: yes, it is possible and correct to have a buffer extend
+ * beyond the first page.
+ */
+static inline void __dma_sync_page_highmem(struct page *page,
+ unsigned long offset, size_t size, int direction)
+{
+ size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
+ size_t cur_size = seg_size;
+ unsigned long flags, start, seg_offset = offset;
+ int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
+ int seg_nr = 0;
+
+ local_irq_save(flags);
+
+ do {
+ start = (unsigned long)kmap_atomic(page + seg_nr,
+ KM_PPC_SYNC_PAGE) + seg_offset;
+
+ /* Sync this buffer segment */
+ __dma_sync((void *)start, seg_size, direction);
+ kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
+ seg_nr++;
+
+ /* Calculate next buffer segment size */
+ seg_size = min((size_t)PAGE_SIZE, size - cur_size);
+
+ /* Add the segment size to our running total */
+ cur_size += seg_size;
+ seg_offset = 0;
+ } while (seg_nr < nr_segs);
+
+ local_irq_restore(flags);
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * __dma_sync_page makes memory consistent. identical to __dma_sync, but
+ * takes a struct page instead of a virtual address
+ */
+void __dma_sync_page(struct page *page, unsigned long offset,
+ size_t size, int direction)
+{
+#ifdef CONFIG_HIGHMEM
+ __dma_sync_page_highmem(page, offset, size, direction);
+#else
+ unsigned long start = (unsigned long)page_address(page) + offset;
+ __dma_sync((void *)start, size, direction);
+#endif
+}
+EXPORT_SYMBOL(__dma_sync_page);
ppc_md.progress("MMU:mapin", 0x301);
mapin_ram();
-#ifdef CONFIG_HIGHMEM
- ioremap_base = PKMAP_BASE;
-#else
- ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
- ioremap_bot = ioremap_base;
+ /* Initialize early top-down ioremap allocator */
+ ioremap_bot = IOREMAP_TOP;
/* Map in I/O resources */
if (ppc_md.progress)
bsssize >> 10,
initsize >> 10);
+#ifdef CONFIG_PPC32
+ pr_info("Kernel virtual memory layout:\n");
+ pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP);
+#ifdef CONFIG_HIGHMEM
+ pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n",
+ PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
+#endif /* CONFIG_HIGHMEM */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ pr_info(" * 0x%08lx..0x%08lx : consistent mem\n",
+ IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE);
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+ pr_info(" * 0x%08lx..0x%08lx : early ioremap\n",
+ ioremap_bot, IOREMAP_TOP);
+ pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n",
+ VMALLOC_START, VMALLOC_END);
+#endif /* CONFIG_PPC32 */
+
mem_init_done = 1;
}
pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
- /* Mark this mm has having no context anymore */
- mm->context.id = MMU_NO_CONTEXT;
-
/* Flush the TLB for that context */
local_flush_tlb_mm(mm);
+ /* Mark this mm has having no context anymore */
+ mm->context.id = MMU_NO_CONTEXT;
+
/* XXX This clear should ultimately be part of local_flush_tlb_mm */
__clear_bit(id, stale_map[cpu]);
#endif /* CONFIG_DEBUG_PAGEALLOC */
static int fixmaps;
-unsigned long FIXADDR_TOP = (-PAGE_SIZE);
-EXPORT_SYMBOL(FIXADDR_TOP);
void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
{
#ifndef __ASM_SH_FLAT_H
#define __ASM_SH_FLAT_H
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
else \
clear_thread_flag(TIF_ABI_PENDING); \
/* flush_thread will update pgd cache */ \
- if (current->personality != PER_LINUX32) \
- set_personality(PER_LINUX); \
+ if (personality(current->personality) != PER_LINUX32) \
+ set_personality(PER_LINUX | \
+ (current->personality & (~PER_MASK))); \
} while (0)
#endif /* !(__ASM_SPARC64_ELF_H) */
#define EX_LD(x) \
98: x; \
- .section .fixup; \
+ .section .fixup, "ax"; \
.align 4; \
99: retl; \
mov -1, %o0; \
#define EX_ST(x) \
98: x; \
- .section .fixup; \
+ .section .fixup,"ax"; \
.align 4; \
99: retl; \
mov -1, %o0; \
if (sym->st_shndx == SHN_ABS) {
continue;
}
- if (r_type == R_386_PC32) {
- /* PC relative relocations don't need to be adjusted */
+ if (r_type == R_386_NONE || r_type == R_386_PC32) {
+ /*
+ * NONE can be ignored and and PC relative
+ * relocations don't need to be adjusted.
+ */
}
else if (r_type == R_386_32) {
/* Visit relocations that need to be adjusted */
#define SMAP 0x534d4150 /* ASCII "SMAP" */
-struct e820_ext_entry {
- struct e820entry std;
- u32 ext_flags;
-} __attribute__((packed));
-
static int detect_memory_e820(void)
{
int count = 0;
u32 size, id, edi;
u8 err;
struct e820entry *desc = boot_params.e820_map;
- static struct e820_ext_entry buf; /* static so it is zeroed */
+ static struct e820entry buf; /* static so it is zeroed */
/*
- * Set this here so that if the BIOS doesn't change this field
- * but still doesn't change %ecx, we're still okay...
+ * Note: at least one BIOS is known which assumes that the
+ * buffer pointed to by one e820 call is the same one as
+ * the previous call, and only changes modified fields. Therefore,
+ * we use a temporary buffer and copy the results entry by entry.
+ *
+ * This routine deliberately does not try to account for
+ * ACPI 3+ extended attributes. This is because there are
+ * BIOSes in the field which report zero for the valid bit for
+ * all ranges, and we don't currently make any use of the
+ * other attribute bits. Revisit this if we see the extended
+ * attribute bits deployed in a meaningful way in the future.
*/
- buf.ext_flags = 1;
do {
size = sizeof buf;
break;
}
- /* ACPI 3.0 added the extended flags support. If bit 0
- in the extended flags is zero, we're supposed to simply
- ignore the entry -- a backwards incompatible change! */
- if (size > 20 && !(buf.ext_flags & 1))
- continue;
-
- *desc++ = buf.std;
+ *desc++ = buf;
count++;
} while (next && count < ARRAY_SIZE(boot_params.e820_map));
} };
EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
+static int __init x86_xsave_setup(char *s)
+{
+ setup_clear_cpu_cap(X86_FEATURE_XSAVE);
+ return 1;
+}
+__setup("noxsave", x86_xsave_setup);
+
#ifdef CONFIG_X86_32
static int cachesize_override __cpuinitdata = -1;
static int disable_x86_serial_nr __cpuinitdata = 1;
if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
policy->cpuinfo.transition_latency > 20 * 1000) {
policy->cpuinfo.transition_latency = 20 * 1000;
- printk_once(KERN_INFO "Capping off P-state tranision"
- " latency at 20 uS\n");
+ printk_once(KERN_INFO
+ "P-state transition latency capped at 20 uS\n");
}
/* table init */
case 0x0E: /* Core */
case 0x0F: /* Core Duo */
case 0x16: /* Celeron Core */
+ case 0x1C: /* Atom */
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
return speedstep_get_frequency(SPEEDSTEP_CPU_PCORE);
case 0x0D: /* Pentium M (Dothan) */
return 1;
}
+#ifdef CONFIG_X86_POWERNOW_K7_ACPI
static void invalidate_entry(unsigned int entry)
{
powernow_table[entry].frequency = CPUFREQ_ENTRY_INVALID;
}
+#endif
static int get_ranges(unsigned char *pst)
{
data->batps);
}
+static u32 freq_from_fid_did(u32 fid, u32 did)
+{
+ u32 mhz = 0;
+
+ if (boot_cpu_data.x86 == 0x10)
+ mhz = (100 * (fid + 0x10)) >> did;
+ else if (boot_cpu_data.x86 == 0x11)
+ mhz = (100 * (fid + 8)) >> did;
+ else
+ BUG();
+
+ return mhz * 1000;
+}
+
static int fill_powernow_table(struct powernow_k8_data *data,
struct pst_s *pst, u8 maxvid)
{
powernow_table[i].index = index;
- powernow_table[i].frequency =
- data->acpi_data.states[i].core_frequency * 1000;
+ /* Frequency may be rounded for these */
+ if (boot_cpu_data.x86 == 0x10 || boot_cpu_data.x86 == 0x11) {
+ powernow_table[i].frequency =
+ freq_from_fid_did(lo & 0x3f, (lo >> 6) & 7);
+ } else
+ powernow_table[i].frequency =
+ data->acpi_data.states[i].core_frequency * 1000;
}
return 0;
}
return cpufreq_frequency_table_verify(pol, data->powernow_table);
}
+static const char ACPI_PSS_BIOS_BUG_MSG[] =
+ KERN_ERR FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
+ KERN_ERR FW_BUG PFX "Try again with latest BIOS.\n";
+
/* per CPU init entry point to the driver */
static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol)
{
struct powernow_k8_data *data;
cpumask_t oldmask;
int rc;
- static int print_once;
if (!cpu_online(pol->cpu))
return -ENODEV;
* an UP version, and is deprecated by AMD.
*/
if (num_online_cpus() != 1) {
- /*
- * Replace this one with print_once as soon as such a
- * thing gets introduced
- */
- if (!print_once) {
- WARN_ONCE(1, KERN_ERR FW_BUG PFX "Your BIOS "
- "does not provide ACPI _PSS objects "
- "in a way that Linux understands. "
- "Please report this to the Linux ACPI"
- " maintainers and complain to your "
- "BIOS vendor.\n");
- print_once++;
- }
+ printk_once(ACPI_PSS_BIOS_BUG_MSG);
goto err_out;
}
if (pol->cpu != 0) {
DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"),
},
},
+ { /* Handle problems with rebooting on Sony VGN-Z540N */
+ .callback = set_bios_reboot,
+ .ident = "Sony VGN-Z540N",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
+ },
+ },
{ }
};
/*
* If large page isn't supported, there's no benefit in doing
* this. Also, on non-NUMA, embedding is better.
+ *
+ * NOTE: disabled for now.
*/
- if (!cpu_has_pse || !pcpu_need_numa())
+ if (true || !cpu_has_pse || !pcpu_need_numa())
return -EINVAL;
/*
static int kvm_pv_mmu_flush_tlb(struct kvm_vcpu *vcpu)
{
- kvm_x86_ops->tlb_flush(vcpu);
- set_bit(KVM_REQ_MMU_SYNC, &vcpu->requests);
+ kvm_set_cr3(vcpu, vcpu->arch.cr3);
return 1;
}
void kvm_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4)
{
+ unsigned long old_cr4 = vcpu->arch.cr4;
+ unsigned long pdptr_bits = X86_CR4_PGE | X86_CR4_PSE | X86_CR4_PAE;
+
if (cr4 & CR4_RESERVED_BITS) {
printk(KERN_DEBUG "set_cr4: #GP, reserved bits\n");
kvm_inject_gp(vcpu, 0);
kvm_inject_gp(vcpu, 0);
return;
}
- } else if (is_paging(vcpu) && !is_pae(vcpu) && (cr4 & X86_CR4_PAE)
+ } else if (is_paging(vcpu) && (cr4 & X86_CR4_PAE)
+ && ((cr4 ^ old_cr4) & pdptr_bits)
&& !load_pdptrs(vcpu, vcpu->arch.cr3)) {
printk(KERN_DEBUG "set_cr4: #GP, pdptrs reserved bits\n");
kvm_inject_gp(vcpu, 0);
unsigned long sbase = saddr & PUD_MASK;
unsigned long s_end = sbase + PUD_SIZE;
+ /* Allow segments to share if only one is marked locked */
+ unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED;
+ unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED;
+
/*
* match the virtual addresses, permission and the alignment of the
* page table page.
*/
if (pmd_index(addr) != pmd_index(saddr) ||
- vma->vm_flags != svma->vm_flags ||
+ vm_flags != svm_flags ||
sbase < svma->vm_start || svma->vm_end < s_end)
return 0;
*/
__flush_tlb_all();
- if (cache && boot_cpu_data.x86_model >= 4)
+ if (cache && boot_cpu_data.x86 >= 4)
wbinvd();
}
int in_flags, struct page **pages)
{
unsigned int i, level;
+ unsigned long do_wbinvd = cache && numpages >= 1024; /* 4M threshold */
BUG_ON(irqs_disabled());
- on_each_cpu(__cpa_flush_range, NULL, 1);
+ on_each_cpu(__cpa_flush_all, (void *) do_wbinvd, 1);
- if (!cache)
+ if (!cache || do_wbinvd)
return;
- /* 4M threshold */
- if (numpages >= 1024) {
- if (boot_cpu_data.x86_model >= 4)
- wbinvd();
- return;
- }
/*
* We only need to flush on one CPU,
* clflush is a MESI-coherent instruction that
if (err)
return err;
- walk->offset = 0;
-
- if (nbytes)
+ if (nbytes) {
+ walk->offset = 0;
+ walk->pg++;
return hash_walk_next(walk);
+ }
if (!walk->total)
return 0;
struct acpi_pci_data *pdata;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_handle handle;
- struct pci_dev *dev;
- struct pci_bus *bus;
-
if (!device || !device->parent)
return -EINVAL;
* Locate matching device in PCI namespace. If it doesn't exist
* this typically means that the device isn't currently inserted
* (e.g. docking station, port replicator, etc.).
- * We cannot simply search the global pci device list, since
- * PCI devices are added to the global pci list when the root
- * bridge start ops are run, which may not have happened yet.
*/
- bus = pci_find_bus(data->id.segment, data->id.bus);
- if (bus) {
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->devfn == PCI_DEVFN(data->id.device,
- data->id.function)) {
- data->dev = dev;
- break;
- }
- }
- }
+ data->dev = pci_get_slot(pdata->bus,
+ PCI_DEVFN(data->id.device, data->id.function));
if (!data->dev) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d not present in PCI namespace\n",
end:
kfree(buffer.pointer);
- if (result)
+ if (result) {
+ pci_dev_put(data->dev);
kfree(data);
-
+ }
return result;
}
if (data->dev->subordinate) {
acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
}
+ pci_dev_put(data->dev);
kfree(data);
end:
if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
return;
+ if (boot_cpu_has(X86_FEATURE_AMDC1E))
+ type = ACPI_STATE_C1;
+
/*
* Check, if one of the previous states already marked the lapic
* unstable
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
+ acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C2:
/* Do not access any ACPI IO ports in suspend path */
if (acpi_idle_suspend) {
- acpi_safe_halt();
local_irq_enable();
+ cpu_relax();
return 0;
}
+ acpi_state_timer_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
local_irq_enable();
cx->usage++;
+ acpi_state_timer_broadcast(pr, cx, 0);
return idle_time;
}
(u32) px->bus_master_latency,
(u32) px->control, (u32) px->status));
- if (!px->core_frequency) {
- printk(KERN_ERR PREFIX
- "Invalid _PSS data: freq is zero\n");
+ /*
+ * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+ */
+ if (!px->core_frequency ||
+ ((u32)(px->core_frequency * 1000) !=
+ (px->core_frequency * 1000))) {
+ printk(KERN_ERR FW_BUG PREFIX
+ "Invalid BIOS _PSS frequency: 0x%llx MHz\n",
+ px->core_frequency);
result = -EFAULT;
kfree(pr->performance->states);
goto end;
state = acpi_get_throttling_state(pr, value);
if (state == -1) {
ACPI_WARNING((AE_INFO,
- "Invalid throttling state, reset\n"));
+ "Invalid throttling state, reset"));
state = 0;
ret = acpi_processor_set_throttling(pr, state);
if (ret)
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
},
},
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "eMachines E510",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5315",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
+ },
+ },
{}
};
return acpi_video_register();
}
-void __exit acpi_video_exit(void)
+void acpi_video_exit(void)
{
acpi_bus_unregister_driver(&acpi_video_bus);
If unsure, say N.
+config PATA_PALMLD
+ tristate "Palm LifeDrive PATA support"
+ depends on MACH_PALMLD
+ help
+ This option enables support for Palm LifeDrive's internal ATA
+ port via the new ATA layer.
+
+ If unsure, say N.
+
config PATA_PCMCIA
tristate "PCMCIA PATA support"
depends on PCMCIA
obj-$(CONFIG_PATA_MARVELL) += pata_marvell.o
obj-$(CONFIG_PATA_MPIIX) += pata_mpiix.o
obj-$(CONFIG_PATA_OLDPIIX) += pata_oldpiix.o
+obj-$(CONFIG_PATA_PALMLD) += pata_palmld.o
obj-$(CONFIG_PATA_PCMCIA) += pata_pcmcia.o
obj-$(CONFIG_PATA_PDC2027X) += pata_pdc2027x.o
obj-$(CONFIG_PATA_PDC_OLD) += pata_pdc202xx_old.o
/* No PIO or DMA methods needed for this device */
+static unsigned int netcell_read_id(struct ata_device *adev,
+ struct ata_taskfile *tf, u16 *id)
+{
+ unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
+ /* Firmware forgets to mark words 85-87 valid */
+ if (err_mask == 0)
+ id[ATA_ID_CSF_DEFAULT] |= 0x0400;
+ return err_mask;
+}
+
static struct scsi_host_template netcell_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations netcell_ops = {
.inherits = &ata_bmdma_port_ops,
- .cable_detect = ata_cable_80wire,
+ .cable_detect = ata_cable_80wire,
+ .read_id = netcell_read_id,
};
--- /dev/null
+/*
+ * drivers/ata/pata_palmld.c
+ *
+ * Driver for IDE channel in Palm LifeDrive
+ *
+ * Based on research of:
+ * Alex Osborne <ato@meshy.org>
+ *
+ * Rewrite for mainline:
+ * Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Rewritten version based on pata_ixp4xx_cf.c:
+ * ixp4xx PATA/Compact Flash driver
+ * Copyright (C) 2006-07 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <scsi/scsi_host.h>
+#include <mach/palmld.h>
+
+#define DRV_NAME "pata_palmld"
+
+static struct scsi_host_template palmld_sht = {
+ ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations palmld_port_ops = {
+ .inherits = &ata_sff_port_ops,
+ .sff_data_xfer = ata_sff_data_xfer_noirq,
+ .cable_detect = ata_cable_40wire,
+};
+
+static __devinit int palmld_pata_probe(struct platform_device *pdev)
+{
+ struct ata_host *host;
+ struct ata_port *ap;
+ void __iomem *mem;
+ int ret;
+
+ /* allocate host */
+ host = ata_host_alloc(&pdev->dev, 1);
+ if (!host)
+ return -ENOMEM;
+
+ /* remap drive's physical memory address */
+ mem = devm_ioremap(&pdev->dev, PALMLD_IDE_PHYS, 0x1000);
+ if (!mem)
+ return -ENOMEM;
+
+ /* request and activate power GPIO, IRQ GPIO */
+ ret = gpio_request(GPIO_NR_PALMLD_IDE_PWEN, "HDD PWR");
+ if (ret)
+ goto err1;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_PWEN, 1);
+ if (ret)
+ goto err2;
+
+ ret = gpio_request(GPIO_NR_PALMLD_IDE_RESET, "HDD RST");
+ if (ret)
+ goto err2;
+ ret = gpio_direction_output(GPIO_NR_PALMLD_IDE_RESET, 0);
+ if (ret)
+ goto err3;
+
+ /* reset the drive */
+ gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 0);
+ msleep(30);
+ gpio_set_value(GPIO_NR_PALMLD_IDE_RESET, 1);
+ msleep(30);
+
+ /* setup the ata port */
+ ap = host->ports[0];
+ ap->ops = &palmld_port_ops;
+ ap->pio_mask = ATA_PIO4;
+ ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_PIO_POLLING;
+
+ /* memory mapping voodoo */
+ ap->ioaddr.cmd_addr = mem + 0x10;
+ ap->ioaddr.altstatus_addr = mem + 0xe;
+ ap->ioaddr.ctl_addr = mem + 0xe;
+
+ /* start the port */
+ ata_sff_std_ports(&ap->ioaddr);
+
+ /* activate host */
+ return ata_host_activate(host, 0, NULL, IRQF_TRIGGER_RISING,
+ &palmld_sht);
+
+err3:
+ gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+err2:
+ gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+err1:
+ return ret;
+}
+
+static __devexit int palmld_pata_remove(struct platform_device *dev)
+{
+ struct ata_host *host = platform_get_drvdata(dev);
+
+ ata_host_detach(host);
+
+ /* power down the HDD */
+ gpio_set_value(GPIO_NR_PALMLD_IDE_PWEN, 0);
+
+ gpio_free(GPIO_NR_PALMLD_IDE_RESET);
+ gpio_free(GPIO_NR_PALMLD_IDE_PWEN);
+
+ return 0;
+}
+
+static struct platform_driver palmld_pata_platform_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+ .probe = palmld_pata_probe,
+ .remove = __devexit_p(palmld_pata_remove),
+};
+
+static int __init palmld_pata_init(void)
+{
+ return platform_driver_register(&palmld_pata_platform_driver);
+}
+
+static void __exit palmld_pata_exit(void)
+{
+ platform_driver_unregister(&palmld_pata_platform_driver);
+}
+
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("PalmLD PATA driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(palmld_pata_init);
+module_exit(palmld_pata_exit);
}
kobject_uevent(&priv->kobj, KOBJ_ADD);
- return error;
+ return 0;
out_unregister:
+ kfree(drv->p);
+ drv->p = NULL;
kobject_put(&priv->kobj);
out_put_bus:
bus_put(bus);
}
if (!dev_name(dev))
- goto done;
+ goto name_error;
pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
cleanup_device_parent(dev);
if (parent)
put_device(parent);
+name_error:
+ kfree(dev->p);
+ dev->p = NULL;
goto done;
}
*/
void driver_unregister(struct device_driver *drv)
{
+ if (!drv || !drv->p) {
+ WARN(1, "Unexpected driver unregister!\n");
+ return;
+ }
driver_remove_groups(drv, drv->groups);
bus_remove_driver(drv);
}
{
struct device *dev;
+ mutex_lock(&dpm_list_mtx);
list_for_each_entry(dev, &dpm_list, power.entry)
if (dev->power.status > DPM_OFF) {
int error;
if (error)
pm_dev_err(dev, state, " early", error);
}
+ mutex_unlock(&dpm_list_mtx);
}
/**
int error = 0;
suspend_device_irqs();
+ mutex_lock(&dpm_list_mtx);
list_for_each_entry_reverse(dev, &dpm_list, power.entry) {
error = suspend_device_noirq(dev, state);
if (error) {
}
dev->power.status = DPM_OFF_IRQ;
}
+ mutex_unlock(&dpm_list_mtx);
if (error)
device_power_up(resume_event(state));
return error;
To compile this driver as a module, choose M here: the
module will be called virtio-rng. If unsure, say N.
+
+config HW_RANDOM_MXC_RNGA
+ tristate "Freescale i.MX RNGA Random Number Generator"
+ depends on HW_RANDOM && ARCH_HAS_RNGA
+ ---help---
+ This driver provides kernel-side support for the Random Number
+ Generator hardware found on Freescale i.MX processors.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mxc-rnga.
+
+ If unsure, say Y.
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
+obj-$(CONFIG_HW_RANDOM_MXC_RNGA) += mxc-rnga.o
--- /dev/null
+/*
+ * RNG driver for Freescale RNGA
+ *
+ * Copyright 2008-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Author: Alan Carvalho de Assis <acassis@gmail.com>
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ *
+ * This driver is based on other RNG drivers.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/hw_random.h>
+#include <linux/io.h>
+
+/* RNGA Registers */
+#define RNGA_CONTROL 0x00
+#define RNGA_STATUS 0x04
+#define RNGA_ENTROPY 0x08
+#define RNGA_OUTPUT_FIFO 0x0c
+#define RNGA_MODE 0x10
+#define RNGA_VERIFICATION_CONTROL 0x14
+#define RNGA_OSC_CONTROL_COUNTER 0x18
+#define RNGA_OSC1_COUNTER 0x1c
+#define RNGA_OSC2_COUNTER 0x20
+#define RNGA_OSC_COUNTER_STATUS 0x24
+
+/* RNGA Registers Range */
+#define RNG_ADDR_RANGE 0x28
+
+/* RNGA Control Register */
+#define RNGA_CONTROL_SLEEP 0x00000010
+#define RNGA_CONTROL_CLEAR_INT 0x00000008
+#define RNGA_CONTROL_MASK_INTS 0x00000004
+#define RNGA_CONTROL_HIGH_ASSURANCE 0x00000002
+#define RNGA_CONTROL_GO 0x00000001
+
+#define RNGA_STATUS_LEVEL_MASK 0x0000ff00
+
+/* RNGA Status Register */
+#define RNGA_STATUS_OSC_DEAD 0x80000000
+#define RNGA_STATUS_SLEEP 0x00000010
+#define RNGA_STATUS_ERROR_INT 0x00000008
+#define RNGA_STATUS_FIFO_UNDERFLOW 0x00000004
+#define RNGA_STATUS_LAST_READ_STATUS 0x00000002
+#define RNGA_STATUS_SECURITY_VIOLATION 0x00000001
+
+static struct platform_device *rng_dev;
+
+static int mxc_rnga_data_present(struct hwrng *rng)
+{
+ int level;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* how many random numbers is in FIFO? [0-16] */
+ level = ((__raw_readl(rng_base + RNGA_STATUS) &
+ RNGA_STATUS_LEVEL_MASK) >> 8);
+
+ return level > 0 ? 1 : 0;
+}
+
+static int mxc_rnga_data_read(struct hwrng *rng, u32 * data)
+{
+ int err;
+ u32 ctrl;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* retrieve a random number from FIFO */
+ *data = __raw_readl(rng_base + RNGA_OUTPUT_FIFO);
+
+ /* some error while reading this random number? */
+ err = __raw_readl(rng_base + RNGA_STATUS) & RNGA_STATUS_ERROR_INT;
+
+ /* if error: clear error interrupt, but doesn't return random number */
+ if (err) {
+ dev_dbg(&rng_dev->dev, "Error while reading random number!\n");
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl | RNGA_CONTROL_CLEAR_INT,
+ rng_base + RNGA_CONTROL);
+ return 0;
+ } else
+ return 4;
+}
+
+static int mxc_rnga_init(struct hwrng *rng)
+{
+ u32 ctrl, osc;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ /* wake up */
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl & ~RNGA_CONTROL_SLEEP, rng_base + RNGA_CONTROL);
+
+ /* verify if oscillator is working */
+ osc = __raw_readl(rng_base + RNGA_STATUS);
+ if (osc & RNGA_STATUS_OSC_DEAD) {
+ dev_err(&rng_dev->dev, "RNGA Oscillator is dead!\n");
+ return -ENODEV;
+ }
+
+ /* go running */
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+ __raw_writel(ctrl | RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+
+ return 0;
+}
+
+static void mxc_rnga_cleanup(struct hwrng *rng)
+{
+ u32 ctrl;
+ void __iomem *rng_base = (void __iomem *)rng->priv;
+
+ ctrl = __raw_readl(rng_base + RNGA_CONTROL);
+
+ /* stop rnga */
+ __raw_writel(ctrl & ~RNGA_CONTROL_GO, rng_base + RNGA_CONTROL);
+}
+
+static struct hwrng mxc_rnga = {
+ .name = "mxc-rnga",
+ .init = mxc_rnga_init,
+ .cleanup = mxc_rnga_cleanup,
+ .data_present = mxc_rnga_data_present,
+ .data_read = mxc_rnga_data_read
+};
+
+static int __init mxc_rnga_probe(struct platform_device *pdev)
+{
+ int err = -ENODEV;
+ struct clk *clk;
+ struct resource *res, *mem;
+ void __iomem *rng_base = NULL;
+
+ if (rng_dev)
+ return -EBUSY;
+
+ clk = clk_get(&pdev->dev, "rng");
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Could not get rng_clk!\n");
+ err = PTR_ERR(clk);
+ goto out;
+ }
+
+ clk_enable(clk);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ err = -ENOENT;
+ goto err_region;
+ }
+
+ mem = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (mem == NULL) {
+ err = -EBUSY;
+ goto err_region;
+ }
+
+ rng_base = ioremap(res->start, resource_size(res));
+ if (!rng_base) {
+ err = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ mxc_rnga.priv = (unsigned long)rng_base;
+
+ err = hwrng_register(&mxc_rnga);
+ if (err) {
+ dev_err(&pdev->dev, "MXC RNGA registering failed (%d)\n", err);
+ goto err_register;
+ }
+
+ rng_dev = pdev;
+
+ dev_info(&pdev->dev, "MXC RNGA Registered.\n");
+
+ return 0;
+
+err_register:
+ iounmap(rng_base);
+ rng_base = NULL;
+
+err_ioremap:
+ release_mem_region(res->start, resource_size(res));
+
+err_region:
+ clk_disable(clk);
+ clk_put(clk);
+
+out:
+ return err;
+}
+
+static int __exit mxc_rnga_remove(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ void __iomem *rng_base = (void __iomem *)mxc_rnga.priv;
+ struct clk *clk = clk_get(&pdev->dev, "rng");
+
+ hwrng_unregister(&mxc_rnga);
+
+ iounmap(rng_base);
+
+ release_mem_region(res->start, resource_size(res));
+
+ clk_disable(clk);
+ clk_put(clk);
+
+ return 0;
+}
+
+static struct platform_driver mxc_rnga_driver = {
+ .driver = {
+ .name = "mxc_rnga",
+ .owner = THIS_MODULE,
+ },
+ .remove = __exit_p(mxc_rnga_remove),
+};
+
+static int __init mod_init(void)
+{
+ return platform_driver_probe(&mxc_rnga_driver, mxc_rnga_probe);
+}
+
+static void __exit mod_exit(void)
+{
+ platform_driver_unregister(&mxc_rnga_driver);
+}
+
+module_init(mod_init);
+module_exit(mod_exit);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("H/W RNGA driver for i.MX");
+MODULE_LICENSE("GPL");
spin_unlock_irqrestore(&cpufreq_driver_lock, flags);
#endif
+ unlock_policy_rwsem_write(cpu);
+
if (cpufreq_driver->target)
__cpufreq_governor(data, CPUFREQ_GOV_STOP);
- unlock_policy_rwsem_write(cpu);
-
kobject_put(&data->kobj);
/* we need to make sure that the underlying kobj is actually
* (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
* cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
* is recursive for the same process. -Venki
+ * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
+ * would deadlock with cancel_delayed_work_sync(), which is needed for proper
+ * raceless workqueue teardown.
*/
static DEFINE_MUTEX(dbs_mutex);
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
dbs_info->enable = 0;
- cancel_delayed_work(&dbs_info->work);
+ cancel_delayed_work_sync(&dbs_info->work);
}
static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
* (like __cpufreq_driver_target()) is being called with dbs_mutex taken, then
* cpu_hotplug lock should be taken before that. Note that cpu_hotplug lock
* is recursive for the same process. -Venki
+ * DEADLOCK ALERT! (2) : do_dbs_timer() must not take the dbs_mutex, because it
+ * would deadlock with cancel_delayed_work_sync(), which is needed for proper
+ * raceless workqueue teardown.
*/
static DEFINE_MUTEX(dbs_mutex);
static inline void dbs_timer_exit(struct cpu_dbs_info_s *dbs_info)
{
dbs_info->enable = 0;
- cancel_delayed_work(&dbs_info->work);
+ cancel_delayed_work_sync(&dbs_info->work);
}
static int cpufreq_governor_dbs(struct cpufreq_policy *policy,
static void set_ld_eol(struct fsl_dma_chan *fsl_chan,
struct fsl_desc_sw *desc)
{
+ u64 snoop_bits;
+
+ snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX)
+ ? FSL_DMA_SNEN : 0;
+
desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
- DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL,
- 64);
+ DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL
+ | snoop_bits, 64);
}
static void append_ld_queue(struct fsl_dma_chan *fsl_chan,
static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
- struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
+ struct fsl_desc_sw *desc;
unsigned long flags;
dma_cookie_t cookie;
spin_lock_irqsave(&fsl_chan->desc_lock, flags);
cookie = fsl_chan->common.cookie;
- cookie++;
- if (cookie < 0)
- cookie = 1;
- desc->async_tx.cookie = cookie;
- fsl_chan->common.cookie = desc->async_tx.cookie;
+ list_for_each_entry(desc, &tx->tx_list, node) {
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
- append_ld_queue(fsl_chan, desc);
- list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev);
+ desc->async_tx.cookie = cookie;
+ }
+
+ fsl_chan->common.cookie = cookie;
+ append_ld_queue(fsl_chan, tx_to_fsl_desc(tx));
+ list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev);
spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
{
struct fsl_dma_chan *fsl_chan;
struct fsl_desc_sw *first = NULL, *prev = NULL, *new;
+ struct list_head *list;
size_t copy;
- LIST_HEAD(link_chain);
if (!chan)
return NULL;
if (!new) {
dev_err(fsl_chan->dev,
"No free memory for link descriptor\n");
- return NULL;
+ goto fail;
}
#ifdef FSL_DMA_LD_DEBUG
dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
/* Set End-of-link to the last link descriptor of new list*/
set_ld_eol(fsl_chan, new);
- return first ? &first->async_tx : NULL;
+ return &first->async_tx;
+
+fail:
+ if (!first)
+ return NULL;
+
+ list = &first->async_tx.tx_list;
+ list_for_each_entry_safe_reverse(new, prev, list, node) {
+ list_del(&new->node);
+ dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+ }
+
+ return NULL;
}
/**
dma_addr_t next_dest_addr;
unsigned long flags;
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
if (!dma_is_idle(fsl_chan))
- return;
+ goto out_unlock;
dma_halt(fsl_chan);
/* If there are some link descriptors
* not transfered in queue. We need to start it.
*/
- spin_lock_irqsave(&fsl_chan->desc_lock, flags);
/* Find the first un-transfer desciptor */
for (ld_node = fsl_chan->ld_queue.next;
fsl_chan->common.cookie) == DMA_SUCCESS);
ld_node = ld_node->next);
- spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
-
if (ld_node != &fsl_chan->ld_queue) {
/* Get the ld start address from ld_queue */
next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys;
- dev_dbg(fsl_chan->dev, "xfer LDs staring from %p\n",
- (void *)next_dest_addr);
+ dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n",
+ (unsigned long long)next_dest_addr);
set_cdar(fsl_chan, next_dest_addr);
dma_start(fsl_chan);
} else {
set_cdar(fsl_chan, 0);
set_ndar(fsl_chan, 0);
}
+
+out_unlock:
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
}
/**
*/
if (stat & FSL_DMA_SR_EOSI) {
dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n");
- dev_dbg(fsl_chan->dev, "event: clndar %p, nlndar %p\n",
- (void *)get_cdar(fsl_chan), (void *)get_ndar(fsl_chan));
+ dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n",
+ (unsigned long long)get_cdar(fsl_chan),
+ (unsigned long long)get_ndar(fsl_chan));
stat &= ~FSL_DMA_SR_EOSI;
update_cookie = 1;
}
new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7;
- if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) {
+ if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
dev_err(fdev->dev, "There is no %d channel!\n",
new_fsl_chan->id);
err = -EINVAL;
}
dev_info(&dev->dev, "Probe the Freescale DMA driver for %s "
- "controller at %p...\n",
- match->compatible, (void *)fdev->reg.start);
+ "controller at 0x%llx...\n",
+ match->compatible, (unsigned long long)fdev->reg.start);
fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end
- fdev->reg.start + 1);
xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
- if (i7300_idle_platform_probe(NULL, NULL) == 0) {
+ if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) {
device->common.chancnt--;
}
#endif
config EDAC_AMD8131
tristate "AMD8131 HyperTransport PCI-X Tunnel"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8131 HyperTransport PCI-X Tunnel chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
config EDAC_AMD8111
tristate "AMD8111 HyperTransport I/O Hub"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8111 HyperTransport I/O Hub chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
endif # EDAC
obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o
obj-$(CONFIG_EDAC_CELL) += cell_edac.o
obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o
+obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
+obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = dev_info->check;
pci_info->edac_dev->dev = &pci_info->dev->dev;
pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
pci_info->edac_dev->ctl_name = pci_info->ctl_name;
- pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id;
+ pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
pci_info->edac_dev->edac_check = pci_info->check;
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = amd8131_chipset.check;
will load the correct one.
config DRM_I915
+ tristate "i915 driver"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB
select FRAMEBUFFER_CONSOLE if !EMBEDDED
- tristate "i915 driver"
+ # i915 depends on ACPI_VIDEO when ACPI is enabled
+ # but for select to work, need to select ACPI_VIDEO's dependencies, ick
+ select VIDEO_OUTPUT_CONTROL if ACPI
+ select BACKLIGHT_CLASS_DEVICE if ACPI
+ select INPUT if ACPI
+ select ACPI_VIDEO if ACPI
help
Choose this option if you have a system that has Intel 830M, 845G,
852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
config DRM_I915_KMS
bool "Enable modesetting on intel by default"
depends on DRM_I915
- # i915 KMS depends on ACPI_VIDEO when ACPI is enabled
- # but for select to work, need to select ACPI_VIDEO's dependencies, ick
- select VIDEO_OUTPUT_CONTROL if ACPI
- select BACKLIGHT_CLASS_DEVICE if ACPI
- select INPUT if ACPI
- select ACPI_VIDEO if ACPI
help
Choose this option if you want kernel modesetting enabled by default,
and you have a new enough userspace to support this. Running old
int backlight_duty_cycle; /* restore backlight to this value */
bool panel_wants_dither;
struct drm_display_mode *panel_fixed_mode;
- struct drm_display_mode *vbt_mode; /* if any */
+ struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
+ struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
/* Feature bits from the VBIOS */
unsigned int int_tv_support:1;
last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
num_pages = last_data_page - first_data_page + 1;
- user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL);
+ user_pages = drm_calloc_large(num_pages, sizeof(struct page *));
if (user_pages == NULL)
return -ENOMEM;
SetPageDirty(user_pages[i]);
page_cache_release(user_pages[i]);
}
- kfree(user_pages);
+ drm_free_large(user_pages);
return ret;
}
last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
num_pages = last_data_page - first_data_page + 1;
- user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL);
+ user_pages = drm_calloc_large(num_pages, sizeof(struct page *));
if (user_pages == NULL)
return -ENOMEM;
out_unpin_pages:
for (i = 0; i < pinned_pages; i++)
page_cache_release(user_pages[i]);
- kfree(user_pages);
+ drm_free_large(user_pages);
return ret;
}
last_data_page = (data_ptr + args->size - 1) / PAGE_SIZE;
num_pages = last_data_page - first_data_page + 1;
- user_pages = kcalloc(num_pages, sizeof(struct page *), GFP_KERNEL);
+ user_pages = drm_calloc_large(num_pages, sizeof(struct page *));
if (user_pages == NULL)
return -ENOMEM;
fail_put_user_pages:
for (i = 0; i < pinned_pages; i++)
page_cache_release(user_pages[i]);
- kfree(user_pages);
+ drm_free_large(user_pages);
return ret;
}
mutex_unlock(&dev->struct_mutex);
return VM_FAULT_SIGBUS;
}
- list_add(&obj_priv->list, &dev_priv->mm.inactive_list);
+
+ ret = i915_gem_object_set_to_gtt_domain(obj, write);
+ if (ret) {
+ mutex_unlock(&dev->struct_mutex);
+ return VM_FAULT_SIGBUS;
+ }
+
+ list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
}
/* Need a new fence register? */
mutex_unlock(&dev->struct_mutex);
return ret;
}
- list_add(&obj_priv->list, &dev_priv->mm.inactive_list);
+ list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
}
drm_gem_object_unreference(obj);
}
obj_priv->dirty = 0;
- drm_free(obj_priv->pages,
- page_count * sizeof(struct page *),
- DRM_MEM_DRIVER);
+ drm_free_large(obj_priv->pages);
obj_priv->pages = NULL;
}
*/
page_count = obj->size / PAGE_SIZE;
BUG_ON(obj_priv->pages != NULL);
- obj_priv->pages = drm_calloc(page_count, sizeof(struct page *),
- DRM_MEM_DRIVER);
+ obj_priv->pages = drm_calloc_large(page_count, sizeof(struct page *));
if (obj_priv->pages == NULL) {
DRM_ERROR("Faled to allocate page list\n");
obj_priv->pages_refcount--;
return;
}
- pitch_val = (obj_priv->stride / 128) - 1;
- WARN_ON(pitch_val & ~0x0000000f);
+ pitch_val = obj_priv->stride / 128;
+ pitch_val = ffs(pitch_val) - 1;
+ WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL);
+
val = obj_priv->gtt_offset;
if (obj_priv->tiling_mode == I915_TILING_Y)
val |= 1 << I830_FENCE_TILING_Y_SHIFT;
if (obj_priv->pages == NULL)
return;
+ /* XXX: The 865 in particular appears to be weird in how it handles
+ * cache flushing. We haven't figured it out, but the
+ * clflush+agp_chipset_flush doesn't appear to successfully get the
+ * data visible to the PGU, while wbinvd + agp_chipset_flush does.
+ */
+ if (IS_I865G(obj->dev)) {
+ wbinvd();
+ return;
+ }
+
drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE);
}
reloc_count += exec_list[i].relocation_count;
}
- *relocs = drm_calloc(reloc_count, sizeof(**relocs), DRM_MEM_DRIVER);
+ *relocs = drm_calloc_large(reloc_count, sizeof(**relocs));
if (*relocs == NULL)
return -ENOMEM;
exec_list[i].relocation_count *
sizeof(**relocs));
if (ret != 0) {
- drm_free(*relocs, reloc_count * sizeof(**relocs),
- DRM_MEM_DRIVER);
+ drm_free_large(*relocs);
*relocs = NULL;
return -EFAULT;
}
}
err:
- drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER);
+ drm_free_large(relocs);
return ret;
}
return -EINVAL;
}
/* Copy in the exec list from userland */
- exec_list = drm_calloc(sizeof(*exec_list), args->buffer_count,
- DRM_MEM_DRIVER);
- object_list = drm_calloc(sizeof(*object_list), args->buffer_count,
- DRM_MEM_DRIVER);
+ exec_list = drm_calloc_large(sizeof(*exec_list), args->buffer_count);
+ object_list = drm_calloc_large(sizeof(*object_list), args->buffer_count);
if (exec_list == NULL || object_list == NULL) {
DRM_ERROR("Failed to allocate exec or object list "
"for %d buffers\n",
}
pre_mutex_err:
- drm_free(object_list, sizeof(*object_list) * args->buffer_count,
- DRM_MEM_DRIVER);
- drm_free(exec_list, sizeof(*exec_list) * args->buffer_count,
- DRM_MEM_DRIVER);
+ drm_free_large(object_list);
+ drm_free_large(exec_list);
drm_free(cliprects, sizeof(*cliprects) * args->num_cliprects,
DRM_MEM_DRIVER);
if (tiling_mode == I915_TILING_NONE)
return true;
- if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
+ if (!IS_I9XX(dev) ||
+ (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
tile_width = 128;
else
tile_width = 512;
if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
return false;
} else if (IS_I9XX(dev)) {
- if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL ||
+ uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+ /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
+ * instead of 4 (2KB) on 945s.
+ */
+ if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 20))
return false;
} else {
- if (stride / 128 > I830_FENCE_MAX_PITCH_VAL ||
+ uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+ if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 19))
return false;
}
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
#define I830_FENCE_PITCH_SHIFT 4
#define I830_FENCE_REG_VALID (1<<0)
-#define I830_FENCE_MAX_PITCH_VAL 0x10
+#define I915_FENCE_MAX_PITCH_VAL 0x10
+#define I830_FENCE_MAX_PITCH_VAL 6
#define I830_FENCE_MAX_SIZE_VAL (1<<8)
#define I915_FENCE_START_MASK 0x0ff00000
/* Cursor A & B regs */
#define CURACNTR 0x70080
+/* Old style CUR*CNTR flags (desktop 8xx) */
+#define CURSOR_ENABLE 0x80000000
+#define CURSOR_GAMMA_ENABLE 0x40000000
+#define CURSOR_STRIDE_MASK 0x30000000
+#define CURSOR_FORMAT_SHIFT 24
+#define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT)
+#define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT)
+/* New style CUR*CNTR flags */
+#define CURSOR_MODE 0x27
#define CURSOR_MODE_DISABLE 0x00
#define CURSOR_MODE_64_32B_AX 0x07
#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
+#define MCURSOR_PIPE_SELECT (1 << 28)
+#define MCURSOR_PIPE_A 0x00
+#define MCURSOR_PIPE_B (1 << 28)
#define MCURSOR_GAMMA_ENABLE (1 << 26)
#define CURABASE 0x70084
#define CURAPOS 0x70088
#define CURSOR_POS_SIGN 0x8000
#define CURSOR_X_SHIFT 0
#define CURSOR_Y_SHIFT 16
+#define CURSIZE 0x700a0
#define CURBCNTR 0x700c0
#define CURBBASE 0x700c4
#define CURBPOS 0x700c8
return NULL;
}
-/* Try to find panel data */
static void
-parse_panel_data(struct drm_i915_private *dev_priv, struct bdb_header *bdb)
+fill_detail_timing_data(struct drm_display_mode *panel_fixed_mode,
+ struct lvds_dvo_timing *dvo_timing)
+{
+ panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
+ dvo_timing->hactive_lo;
+ panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
+ ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
+ panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
+ dvo_timing->hsync_pulse_width;
+ panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
+ ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
+
+ panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
+ dvo_timing->vactive_lo;
+ panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
+ dvo_timing->vsync_off;
+ panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
+ dvo_timing->vsync_pulse_width;
+ panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
+ ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
+ panel_fixed_mode->clock = dvo_timing->clock * 10;
+ panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+
+ /* Some VBTs have bogus h/vtotal values */
+ if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
+ panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
+ if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
+ panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+
+ drm_mode_set_name(panel_fixed_mode);
+}
+
+/* Try to find integrated panel data */
+static void
+parse_lfp_panel_data(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
{
struct bdb_lvds_options *lvds_options;
struct bdb_lvds_lfp_data *lvds_lfp_data;
panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
DRM_MEM_DRIVER);
- panel_fixed_mode->hdisplay = (dvo_timing->hactive_hi << 8) |
- dvo_timing->hactive_lo;
- panel_fixed_mode->hsync_start = panel_fixed_mode->hdisplay +
- ((dvo_timing->hsync_off_hi << 8) | dvo_timing->hsync_off_lo);
- panel_fixed_mode->hsync_end = panel_fixed_mode->hsync_start +
- dvo_timing->hsync_pulse_width;
- panel_fixed_mode->htotal = panel_fixed_mode->hdisplay +
- ((dvo_timing->hblank_hi << 8) | dvo_timing->hblank_lo);
+ fill_detail_timing_data(panel_fixed_mode, dvo_timing);
- panel_fixed_mode->vdisplay = (dvo_timing->vactive_hi << 8) |
- dvo_timing->vactive_lo;
- panel_fixed_mode->vsync_start = panel_fixed_mode->vdisplay +
- dvo_timing->vsync_off;
- panel_fixed_mode->vsync_end = panel_fixed_mode->vsync_start +
- dvo_timing->vsync_pulse_width;
- panel_fixed_mode->vtotal = panel_fixed_mode->vdisplay +
- ((dvo_timing->vblank_hi << 8) | dvo_timing->vblank_lo);
- panel_fixed_mode->clock = dvo_timing->clock * 10;
- panel_fixed_mode->type = DRM_MODE_TYPE_PREFERRED;
+ dev_priv->lfp_lvds_vbt_mode = panel_fixed_mode;
- /* Some VBTs have bogus h/vtotal values */
- if (panel_fixed_mode->hsync_end > panel_fixed_mode->htotal)
- panel_fixed_mode->htotal = panel_fixed_mode->hsync_end + 1;
- if (panel_fixed_mode->vsync_end > panel_fixed_mode->vtotal)
- panel_fixed_mode->vtotal = panel_fixed_mode->vsync_end + 1;
+ DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
+ drm_mode_debug_printmodeline(panel_fixed_mode);
- drm_mode_set_name(panel_fixed_mode);
+ return;
+}
+
+/* Try to find sdvo panel data */
+static void
+parse_sdvo_panel_data(struct drm_i915_private *dev_priv,
+ struct bdb_header *bdb)
+{
+ struct bdb_sdvo_lvds_options *sdvo_lvds_options;
+ struct lvds_dvo_timing *dvo_timing;
+ struct drm_display_mode *panel_fixed_mode;
- dev_priv->vbt_mode = panel_fixed_mode;
+ dev_priv->sdvo_lvds_vbt_mode = NULL;
- DRM_DEBUG("Found panel mode in BIOS VBT tables:\n");
- drm_mode_debug_printmodeline(panel_fixed_mode);
+ sdvo_lvds_options = find_section(bdb, BDB_SDVO_LVDS_OPTIONS);
+ if (!sdvo_lvds_options)
+ return;
+
+ dvo_timing = find_section(bdb, BDB_SDVO_PANEL_DTDS);
+ if (!dvo_timing)
+ return;
+
+ panel_fixed_mode = drm_calloc(1, sizeof(*panel_fixed_mode),
+ DRM_MEM_DRIVER);
+
+ if (!panel_fixed_mode)
+ return;
+
+ fill_detail_timing_data(panel_fixed_mode,
+ dvo_timing + sdvo_lvds_options->panel_type);
+
+ dev_priv->sdvo_lvds_vbt_mode = panel_fixed_mode;
return;
}
/* Grab useful general definitions */
parse_general_features(dev_priv, bdb);
- parse_panel_data(dev_priv, bdb);
+ parse_lfp_panel_data(dev_priv, bdb);
+ parse_sdvo_panel_data(dev_priv, bdb);
pci_unmap_rom(pdev, bios);
struct vch_panel_data panels[16];
} __attribute__((packed));
+struct bdb_sdvo_lvds_options {
+ u8 panel_backlight;
+ u8 h40_set_panel_type;
+ u8 panel_type;
+ u8 ssc_clk_freq;
+ u16 als_low_trip;
+ u16 als_high_trip;
+ u8 sclalarcoeff_tab_row_num;
+ u8 sclalarcoeff_tab_row_size;
+ u8 coefficient[8];
+ u8 panel_misc_bits_1;
+ u8 panel_misc_bits_2;
+ u8 panel_misc_bits_3;
+ u8 panel_misc_bits_4;
+} __attribute__((packed));
+
+
bool intel_init_bios(struct drm_device *dev);
/*
return intel_ddc_probe(intel_output);
}
+static enum drm_connector_status
+intel_crt_load_detect(struct drm_crtc *crtc, struct intel_output *intel_output)
+{
+ struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_device *dev = encoder->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ uint32_t pipe = intel_crtc->pipe;
+ uint32_t save_bclrpat;
+ uint32_t save_vtotal;
+ uint32_t vtotal, vactive;
+ uint32_t vsample;
+ uint32_t vblank, vblank_start, vblank_end;
+ uint32_t dsl;
+ uint32_t bclrpat_reg;
+ uint32_t vtotal_reg;
+ uint32_t vblank_reg;
+ uint32_t vsync_reg;
+ uint32_t pipeconf_reg;
+ uint32_t pipe_dsl_reg;
+ uint8_t st00;
+ enum drm_connector_status status;
+
+ if (pipe == 0) {
+ bclrpat_reg = BCLRPAT_A;
+ vtotal_reg = VTOTAL_A;
+ vblank_reg = VBLANK_A;
+ vsync_reg = VSYNC_A;
+ pipeconf_reg = PIPEACONF;
+ pipe_dsl_reg = PIPEADSL;
+ } else {
+ bclrpat_reg = BCLRPAT_B;
+ vtotal_reg = VTOTAL_B;
+ vblank_reg = VBLANK_B;
+ vsync_reg = VSYNC_B;
+ pipeconf_reg = PIPEBCONF;
+ pipe_dsl_reg = PIPEBDSL;
+ }
+
+ save_bclrpat = I915_READ(bclrpat_reg);
+ save_vtotal = I915_READ(vtotal_reg);
+ vblank = I915_READ(vblank_reg);
+
+ vtotal = ((save_vtotal >> 16) & 0xfff) + 1;
+ vactive = (save_vtotal & 0x7ff) + 1;
+
+ vblank_start = (vblank & 0xfff) + 1;
+ vblank_end = ((vblank >> 16) & 0xfff) + 1;
+
+ /* Set the border color to purple. */
+ I915_WRITE(bclrpat_reg, 0x500050);
+
+ if (IS_I9XX(dev)) {
+ uint32_t pipeconf = I915_READ(pipeconf_reg);
+ I915_WRITE(pipeconf_reg, pipeconf | PIPECONF_FORCE_BORDER);
+ /* Wait for next Vblank to substitue
+ * border color for Color info */
+ intel_wait_for_vblank(dev);
+ st00 = I915_READ8(VGA_MSR_WRITE);
+ status = ((st00 & (1 << 4)) != 0) ?
+ connector_status_connected :
+ connector_status_disconnected;
+
+ I915_WRITE(pipeconf_reg, pipeconf);
+ } else {
+ bool restore_vblank = false;
+ int count, detect;
+
+ /*
+ * If there isn't any border, add some.
+ * Yes, this will flicker
+ */
+ if (vblank_start <= vactive && vblank_end >= vtotal) {
+ uint32_t vsync = I915_READ(vsync_reg);
+ uint32_t vsync_start = (vsync & 0xffff) + 1;
+
+ vblank_start = vsync_start;
+ I915_WRITE(vblank_reg,
+ (vblank_start - 1) |
+ ((vblank_end - 1) << 16));
+ restore_vblank = true;
+ }
+ /* sample in the vertical border, selecting the larger one */
+ if (vblank_start - vactive >= vtotal - vblank_end)
+ vsample = (vblank_start + vactive) >> 1;
+ else
+ vsample = (vtotal + vblank_end) >> 1;
+
+ /*
+ * Wait for the border to be displayed
+ */
+ while (I915_READ(pipe_dsl_reg) >= vactive)
+ ;
+ while ((dsl = I915_READ(pipe_dsl_reg)) <= vsample)
+ ;
+ /*
+ * Watch ST00 for an entire scanline
+ */
+ detect = 0;
+ count = 0;
+ do {
+ count++;
+ /* Read the ST00 VGA status register */
+ st00 = I915_READ8(VGA_MSR_WRITE);
+ if (st00 & (1 << 4))
+ detect++;
+ } while ((I915_READ(pipe_dsl_reg) == dsl));
+
+ /* restore vblank if necessary */
+ if (restore_vblank)
+ I915_WRITE(vblank_reg, vblank);
+ /*
+ * If more than 3/4 of the scanline detected a monitor,
+ * then it is assumed to be present. This works even on i830,
+ * where there isn't any way to force the border color across
+ * the screen
+ */
+ status = detect * 4 > count * 3 ?
+ connector_status_connected :
+ connector_status_disconnected;
+ }
+
+ /* Restore previous settings */
+ I915_WRITE(bclrpat_reg, save_bclrpat);
+
+ return status;
+}
+
static enum drm_connector_status intel_crt_detect(struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct drm_encoder *encoder = &intel_output->enc;
+ struct drm_crtc *crtc;
+ int dpms_mode;
+ enum drm_connector_status status;
if (IS_I9XX(dev) && !IS_I915G(dev) && !IS_I915GM(dev)) {
if (intel_crt_detect_hotplug(connector))
if (intel_crt_detect_ddc(connector))
return connector_status_connected;
- /* TODO use load detect */
- return connector_status_unknown;
+ /* for pre-945g platforms use load detect */
+ if (encoder->crtc && encoder->crtc->enabled) {
+ status = intel_crt_load_detect(encoder->crtc, intel_output);
+ } else {
+ crtc = intel_get_load_detect_pipe(intel_output,
+ NULL, &dpms_mode);
+ if (crtc) {
+ status = intel_crt_load_detect(crtc, intel_output);
+ intel_release_load_detect_pipe(intel_output, dpms_mode);
+ } else
+ status = connector_status_unknown;
+ }
+
+ return status;
}
static void intel_crt_destroy(struct drm_connector *connector)
int pipe = intel_crtc->pipe;
uint32_t control = (pipe == 0) ? CURACNTR : CURBCNTR;
uint32_t base = (pipe == 0) ? CURABASE : CURBBASE;
- uint32_t temp;
+ uint32_t temp = I915_READ(control);
size_t addr;
int ret;
/* if we want to turn off the cursor ignore width and height */
if (!handle) {
DRM_DEBUG("cursor off\n");
- temp = CURSOR_MODE_DISABLE;
+ if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+ temp &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+ temp |= CURSOR_MODE_DISABLE;
+ } else {
+ temp &= ~(CURSOR_ENABLE | CURSOR_GAMMA_ENABLE);
+ }
addr = 0;
bo = NULL;
mutex_lock(&dev->struct_mutex);
addr = obj_priv->phys_obj->handle->busaddr;
}
- temp = 0;
- /* set the pipe for the cursor */
- temp |= (pipe << 28);
- temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+ if (!IS_I9XX(dev))
+ I915_WRITE(CURSIZE, (height << 12) | width);
+
+ /* Hooray for CUR*CNTR differences */
+ if (IS_MOBILE(dev) || IS_I9XX(dev)) {
+ temp &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
+ temp |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+ temp |= (pipe << 28); /* Connect to correct pipe */
+ } else {
+ temp &= ~(CURSOR_FORMAT_MASK);
+ temp |= CURSOR_ENABLE;
+ temp |= CURSOR_FORMAT_ARGB | CURSOR_GAMMA_ENABLE;
+ }
finish:
I915_WRITE(control, temp);
}
/* Failed to get EDID, what about VBT? */
- if (dev_priv->vbt_mode) {
+ if (dev_priv->lfp_lvds_vbt_mode) {
mutex_lock(&dev->mode_config.mutex);
dev_priv->panel_fixed_mode =
- drm_mode_duplicate(dev, dev_priv->vbt_mode);
+ drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode);
mutex_unlock(&dev->mode_config.mutex);
if (dev_priv->panel_fixed_mode) {
dev_priv->panel_fixed_mode->type |=
* This is set if we treat the device as HDMI, instead of DVI.
*/
bool is_hdmi;
+ /**
+ * This is set if we detect output of sdvo device as LVDS.
+ */
+ bool is_lvds;
/**
* Returned SDTV resolutions allowed for the current format, if the
static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
{
struct intel_output *intel_output = to_intel_output(connector);
- struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
/* set the bus switch and get the modes */
- intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
intel_ddc_get_modes(intel_output);
#if 0
}
}
+static void intel_sdvo_get_lvds_modes(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct drm_i915_private *dev_priv = connector->dev->dev_private;
+
+ /*
+ * Attempt to get the mode list from DDC.
+ * Assume that the preferred modes are
+ * arranged in priority order.
+ */
+ /* set the bus switch and get the modes */
+ intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+ intel_ddc_get_modes(intel_output);
+ if (list_empty(&connector->probed_modes) == false)
+ return;
+
+ /* Fetch modes from VBT */
+ if (dev_priv->sdvo_lvds_vbt_mode != NULL) {
+ struct drm_display_mode *newmode;
+ newmode = drm_mode_duplicate(connector->dev,
+ dev_priv->sdvo_lvds_vbt_mode);
+ if (newmode != NULL) {
+ /* Guarantee the mode is preferred */
+ newmode->type = (DRM_MODE_TYPE_PREFERRED |
+ DRM_MODE_TYPE_DRIVER);
+ drm_mode_probed_add(connector, newmode);
+ }
+ }
+}
+
static int intel_sdvo_get_modes(struct drm_connector *connector)
{
struct intel_output *output = to_intel_output(connector);
if (sdvo_priv->is_tv)
intel_sdvo_get_tv_modes(connector);
+ else if (sdvo_priv->is_lvds == true)
+ intel_sdvo_get_lvds_modes(connector);
else
intel_sdvo_get_ddc_modes(connector);
if (intel_output->i2c_bus)
intel_i2c_destroy(intel_output->i2c_bus);
+ if (intel_output->ddc_bus)
+ intel_i2c_destroy(intel_output->ddc_bus);
+
drm_sysfs_connector_remove(connector);
drm_connector_cleanup(connector);
kfree(intel_output);
return true;
}
+static struct intel_output *
+intel_sdvo_chan_to_intel_output(struct intel_i2c_chan *chan)
+{
+ struct drm_device *dev = chan->drm_dev;
+ struct drm_connector *connector;
+ struct intel_output *intel_output = NULL;
+
+ list_for_each_entry(connector,
+ &dev->mode_config.connector_list, head) {
+ if (to_intel_output(connector)->ddc_bus == chan) {
+ intel_output = to_intel_output(connector);
+ break;
+ }
+ }
+ return intel_output;
+}
+
+static int intel_sdvo_master_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num)
+{
+ struct intel_output *intel_output;
+ struct intel_sdvo_priv *sdvo_priv;
+ struct i2c_algo_bit_data *algo_data;
+ struct i2c_algorithm *algo;
+
+ algo_data = (struct i2c_algo_bit_data *)i2c_adap->algo_data;
+ intel_output =
+ intel_sdvo_chan_to_intel_output(
+ (struct intel_i2c_chan *)(algo_data->data));
+ if (intel_output == NULL)
+ return -EINVAL;
+
+ sdvo_priv = intel_output->dev_priv;
+ algo = (struct i2c_algorithm *)intel_output->i2c_bus->adapter.algo;
+
+ intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+ return algo->master_xfer(i2c_adap, msgs, num);
+}
+
+static struct i2c_algorithm intel_sdvo_i2c_bit_algo = {
+ .master_xfer = intel_sdvo_master_xfer,
+};
+
bool intel_sdvo_init(struct drm_device *dev, int output_device)
{
struct drm_connector *connector;
struct intel_output *intel_output;
struct intel_sdvo_priv *sdvo_priv;
struct intel_i2c_chan *i2cbus = NULL;
+ struct intel_i2c_chan *ddcbus = NULL;
int connector_type;
u8 ch[0x40];
int i;
return false;
}
- connector = &intel_output->base;
-
- drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
- DRM_MODE_CONNECTOR_Unknown);
- drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
sdvo_priv = (struct intel_sdvo_priv *)(intel_output + 1);
intel_output->type = INTEL_OUTPUT_SDVO;
- connector->interlace_allowed = 0;
- connector->doublescan_allowed = 0;
-
/* setup the DDC bus. */
if (output_device == SDVOB)
i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOB");
i2cbus = intel_i2c_create(dev, GPIOE, "SDVOCTRL_E for SDVOC");
if (!i2cbus)
- goto err_connector;
+ goto err_inteloutput;
sdvo_priv->i2c_bus = i2cbus;
intel_output->i2c_bus = i2cbus;
intel_output->dev_priv = sdvo_priv;
-
/* Read the regs to test if we can talk to the device */
for (i = 0; i < 0x40; i++) {
if (!intel_sdvo_read_byte(intel_output, i, &ch[i])) {
}
}
+ /* setup the DDC bus. */
+ if (output_device == SDVOB)
+ ddcbus = intel_i2c_create(dev, GPIOE, "SDVOB DDC BUS");
+ else
+ ddcbus = intel_i2c_create(dev, GPIOE, "SDVOC DDC BUS");
+
+ if (ddcbus == NULL)
+ goto err_i2c;
+
+ intel_sdvo_i2c_bit_algo.functionality =
+ intel_output->i2c_bus->adapter.algo->functionality;
+ ddcbus->adapter.algo = &intel_sdvo_i2c_bit_algo;
+ intel_output->ddc_bus = ddcbus;
+
+ /* In defaut case sdvo lvds is false */
+ sdvo_priv->is_lvds = false;
intel_sdvo_get_capabilities(intel_output, &sdvo_priv->caps);
if (sdvo_priv->caps.output_flags &
else
sdvo_priv->controlled_output = SDVO_OUTPUT_TMDS1;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_TMDS;
connector_type = DRM_MODE_CONNECTOR_DVID;
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_SVID0)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_SVID0;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_TVDAC;
connector_type = DRM_MODE_CONNECTOR_SVIDEO;
sdvo_priv->is_tv = true;
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB0)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB0;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_DAC;
connector_type = DRM_MODE_CONNECTOR_VGA;
}
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_RGB1)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_RGB1;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_DAC;
connector_type = DRM_MODE_CONNECTOR_VGA;
}
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS0)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS0;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_LVDS;
connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
}
else if (sdvo_priv->caps.output_flags & SDVO_OUTPUT_LVDS1)
{
sdvo_priv->controlled_output = SDVO_OUTPUT_LVDS1;
- connector->display_info.subpixel_order = SubPixelHorizontalRGB;
encoder_type = DRM_MODE_ENCODER_LVDS;
connector_type = DRM_MODE_CONNECTOR_LVDS;
+ sdvo_priv->is_lvds = true;
}
else
{
goto err_i2c;
}
+ connector = &intel_output->base;
+ drm_connector_init(dev, connector, &intel_sdvo_connector_funcs,
+ connector_type);
+ drm_connector_helper_add(connector, &intel_sdvo_connector_helper_funcs);
+ connector->interlace_allowed = 0;
+ connector->doublescan_allowed = 0;
+ connector->display_info.subpixel_order = SubPixelHorizontalRGB;
+
drm_encoder_init(dev, &intel_output->enc, &intel_sdvo_enc_funcs, encoder_type);
drm_encoder_helper_add(&intel_output->enc, &intel_sdvo_helper_funcs);
- connector->connector_type = connector_type;
drm_mode_connector_attach_encoder(&intel_output->base, &intel_output->enc);
drm_sysfs_connector_add(connector);
sdvo_priv->caps.output_flags &
(SDVO_OUTPUT_TMDS1 | SDVO_OUTPUT_RGB1) ? 'Y' : 'N');
- intel_output->ddc_bus = i2cbus;
-
return true;
err_i2c:
+ if (ddcbus != NULL)
+ intel_i2c_destroy(intel_output->ddc_bus);
intel_i2c_destroy(intel_output->i2c_bus);
-err_connector:
- drm_connector_cleanup(connector);
+err_inteloutput:
kfree(intel_output);
return false;
.name = "lm78",
},
.probe = lm78_isa_probe,
- .remove = lm78_isa_remove,
+ .remove = __devexit_p(lm78_isa_remove),
};
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
+static void netcell_quirkproc(ide_drive_t *drive)
+{
+ /* mark words 85-87 as valid */
+ drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000;
+}
+
+static const struct ide_port_ops netcell_port_ops = {
+ .quirkproc = netcell_quirkproc,
+};
+
#define DECLARE_GENERIC_PCI_DEV(extra_flags) \
{ \
.name = DRV_NAME, \
{ /* 6: Revolution */
.name = DRV_NAME,
+ .port_ops = &netcell_port_ops,
.host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
module_param_named(debug, debug, uint, 0644);
MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
+static int forceload;
+module_param_named(forceload, forceload, uint, 0644);
+MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000");
+
#define dprintk(fmt, arg...) \
do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
cpus_clear(idle_cpumask);
total_us = 0;
- if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev))
+ if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload))
return -ENODEV;
if (i7300_idle_thrt_save())
ABS_MT_POSITION_Y,
ABS_MT_TOOL_TYPE,
ABS_MT_BLOB_ID,
+ ABS_MT_TRACKING_ID,
0
};
static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
io->dev.parent = &dev->dev;
kmi->io = io;
- kmi->base = ioremap(dev->res.start, KMI_SIZE);
+ kmi->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!kmi->base) {
ret = -ENOMEM;
goto out;
timeout = wait_event_timeout(ps2dev->wait,
!(ps2dev->flags & PS2_FLAG_CMD1), timeout);
- if (ps2dev->cmdcnt && timeout > 0) {
+ if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) {
timeout = ps2_adjust_timeout(ps2dev, command, timeout);
wait_event_timeout(ps2dev->wait,
#ifdef CONFIG_PM
static int ucb1400_ts_resume(struct platform_device *dev)
{
- struct ucb1400_ts *ucb = platform_get_drvdata(dev);
+ struct ucb1400_ts *ucb = dev->dev.platform_data;
if (ucb->ts_task) {
/*
return -EINVAL;
}
src = iwb->read;
- if (unlikely(limit > BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
+ if (unlikely(limit >= BAS_OUTBUFSIZE + BAS_OUTBUFPAD ||
(read < src && limit >= src))) {
pr_err("isoc write buffer frame reservation violated\n");
return -EFAULT;
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
+
#include <mach/regs-gpio.h>
#include <mach/hardware.h>
#include <mach/h1940-latch.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
#include <mach/hardware.h>
#include <mach/regs-gpio.h>
if (emulate_insn(cpu))
return;
}
+ /* If KVM is active, the vmcall instruction triggers a
+ * General Protection Fault. Normally it triggers an
+ * invalid opcode fault (6): */
+ case 6:
+ /* We need to check if ring == GUEST_PL and
+ * faulting instruction == vmcall. */
+ if (is_hypercall(cpu)) {
+ rewrite_hypercall(cpu);
+ return;
+ }
break;
case 14: /* We've intercepted a Page Fault. */
/* The Guest accessed a virtual address that wasn't mapped.
* up the pointer now to indicate a hypercall is pending. */
cpu->hcall = (struct hcall_args *)cpu->regs;
return;
- case 6:
- /* kvm hypercalls trigger an invalid opcode fault (6).
- * We need to check if ring == GUEST_PL and
- * faulting instruction == vmcall. */
- if (is_hypercall(cpu)) {
- rewrite_hypercall(cpu);
- return;
- }
- break;
}
/* We didn't handle the trap, so it needs to go to the Guest. */
}
bitmap->allclean = 1;
+ spin_lock_irqsave(&bitmap->lock, flags);
for (j = 0; j < bitmap->chunks; j++) {
bitmap_counter_t *bmc;
- spin_lock_irqsave(&bitmap->lock, flags);
- if (!bitmap->filemap) {
+ if (!bitmap->filemap)
/* error or shutdown */
- spin_unlock_irqrestore(&bitmap->lock, flags);
break;
- }
page = filemap_get_page(bitmap, j);
write_page(bitmap, page, 0);
bitmap->allclean = 0;
}
+ spin_lock_irqsave(&bitmap->lock, flags);
+ j |= (PAGE_BITS - 1);
continue;
}
ext2_clear_bit(file_page_offset(j), paddr);
kunmap_atomic(paddr, KM_USER0);
}
- }
- spin_unlock_irqrestore(&bitmap->lock, flags);
+ } else
+ j |= PAGE_COUNTER_MASK;
}
+ spin_unlock_irqrestore(&bitmap->lock, flags);
/* now sync the final page */
if (lastpage != NULL) {
sb->raid_disks = cpu_to_le32(mddev->raid_disks);
sb->size = cpu_to_le64(mddev->dev_sectors);
+ sb->chunksize = cpu_to_le32(mddev->chunk_size >> 9);
+ sb->level = cpu_to_le32(mddev->level);
+ sb->layout = cpu_to_le32(mddev->layout);
if (mddev->bitmap && mddev->bitmap_file == NULL) {
sb->bitmap_offset = cpu_to_le32((__u32)mddev->bitmap_offset);
action_show(mddev_t *mddev, char *page)
{
char *type = "idle";
- if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
+ if (test_bit(MD_RECOVERY_FROZEN, &mddev->recovery))
+ type = "frozen";
+ else if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
(!mddev->ro && test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))) {
if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
type = "reshape";
if (!mddev->pers || !mddev->pers->sync_request)
return -EINVAL;
- if (cmd_match(page, "idle")) {
+ if (cmd_match(page, "frozen"))
+ set_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ else
+ clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+
+ if (cmd_match(page, "idle") || cmd_match(page, "frozen")) {
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_unregister_thread(mddev->sync_thread);
if (strict_blocks_to_sectors(buf, §ors) < 0)
return -EINVAL;
if (mddev->pers && mddev->pers->size(mddev, 0, 0) < sectors)
- return -EINVAL;
+ return -E2BIG;
mddev->external_size = 1;
}
.owner = THIS_MODULE,
.open = md_open,
.release = md_release,
- .locked_ioctl = md_ioctl,
+ .ioctl = md_ioctl,
.getgeo = md_getgeo,
.media_changed = md_media_changed,
.revalidate_disk= md_revalidate,
skipped = 0;
- if ((mddev->curr_resync > mddev->curr_resync_completed &&
- (mddev->curr_resync - mddev->curr_resync_completed)
- > (max_sectors >> 4)) ||
- (j - mddev->curr_resync_completed)*2
- >= mddev->resync_max - mddev->curr_resync_completed
- ) {
+ if (!test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) &&
+ ((mddev->curr_resync > mddev->curr_resync_completed &&
+ (mddev->curr_resync - mddev->curr_resync_completed)
+ > (max_sectors >> 4)) ||
+ (j - mddev->curr_resync_completed)*2
+ >= mddev->resync_max - mddev->curr_resync_completed
+ )) {
/* time to update curr_resync_completed */
blk_unplug(mddev->queue);
wait_event(mddev->recovery_wait,
safepos = conf->reshape_safe;
sector_div(safepos, data_disks);
if (mddev->delta_disks < 0) {
- writepos -= reshape_sectors;
+ writepos -= min_t(sector_t, reshape_sectors, writepos);
readpos += reshape_sectors;
safepos += reshape_sectors;
} else {
writepos += reshape_sectors;
- readpos -= reshape_sectors;
- safepos -= reshape_sectors;
+ readpos -= min_t(sector_t, reshape_sectors, readpos);
+ safepos -= min_t(sector_t, reshape_sectors, safepos);
}
/* 'writepos' is the most advanced device address we might write.
---help---
This is a v4l2 driver for the i.MX1/i.MXL CMOS Sensor Interface
+config MX3_VIDEO
+ bool
+
config VIDEO_MX3
tristate "i.MX3x Camera Sensor Interface driver"
depends on VIDEO_DEV && MX3_IPU && SOC_CAMERA
select VIDEOBUF_DMA_CONTIG
+ select MX3_VIDEO
---help---
This is a v4l2 driver for the i.MX3x Camera Sensor Interface
config MMC_IMX
tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
+ depends on ARCH_MX1
help
This selects the Motorola i.MX Multimedia card Interface.
If you have a i.MX platform with a Multimedia Card slot,
host->mclk = clk_get_rate(host->clk);
DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
}
- host->base = ioremap(dev->res.start, SZ_4K);
+ host->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!host->base) {
ret = -ENOMEM;
goto clk_disable;
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_seg_size = mmc->max_req_size;
- mmc->ocr_avail = mmc_slot(host).ocr_mask;
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
if (pdata->slots[host->slot_id].wires >= 8)
goto err_irq;
}
+ /* initialize power supplies, gpios, etc */
if (pdata->init != NULL) {
if (pdata->init(&pdev->dev) != 0) {
- dev_dbg(mmc_dev(host->mmc),
- "Unable to configure MMC IRQs\n");
+ dev_dbg(mmc_dev(host->mmc), "late init error\n");
goto err_irq_cd_init;
}
}
+ mmc->ocr_avail = mmc_slot(host).ocr_mask;
/* Request IRQ for card detect */
if ((mmc_slot(host).card_detect_irq)) {
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
+#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/io.h>
last_source = source;
- s3c2410_dma_devconfig(host->dma, source, 3,
+ s3c2410_dma_devconfig(host->dma, source,
host->mem->start + host->sdidata);
if (!setup_ok) {
case MMC_POWER_OFF:
default:
s3c2410_gpio_setpin(S3C2410_GPE5, 0);
- s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPE5_OUTP);
+ s3c2410_gpio_cfgpin(S3C2410_GPE5, S3C2410_GPIO_OUTPUT);
if (host->is2440)
mci_con |= S3C2440_SDICON_SDRESET;
break;
case NAND_CMD_READID:
+ host->col_addr = 0;
send_read_id(host);
break;
mtd->priv = this;
mtd->owner = THIS_MODULE;
mtd->dev.parent = &pdev->dev;
+ mtd->name = "mxc_nand";
/* 50 us command delay time */
this->chip_delay = 5;
this->verify_buf = mxc_nand_verify_buf;
host->clk = clk_get(&pdev->dev, "nfc");
- if (IS_ERR(host->clk))
+ if (IS_ERR(host->clk)) {
+ err = PTR_ERR(host->clk);
goto eclk;
+ }
clk_enable(host->clk);
host->clk_act = 1;
host->regs = ioremap(res->start, res->end - res->start + 1);
if (!host->regs) {
- err = -EIO;
+ err = -ENOMEM;
goto eres;
}
#ifdef CONFIG_PM
static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mtd_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
- if (info)
- ret = info->suspend(info);
-
- /* Disable the NFC clock */
- clk_disable(nfc_clk); /* FIXME */
+ if (mtd) {
+ ret = mtd->suspend(mtd);
+ /* Disable the NFC clock */
+ clk_disable(host->clk);
+ }
return ret;
}
static int mxcnd_resume(struct platform_device *pdev)
{
- struct mtd_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
- /* Enable the NFC clock */
- clk_enable(nfc_clk); /* FIXME */
- if (info)
- info->resume(info);
+ if (mtd) {
+ /* Enable the NFC clock */
+ clk_enable(host->clk);
+ mtd->resume(mtd);
+ }
return ret;
}
static int __init mxc_nd_init(void)
{
- /* Register the device driver structure. */
- pr_info("MXC MTD nand Driver\n");
- if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) {
- printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
- return -ENODEV;
- }
- return 0;
+ return platform_driver_probe(&mxcnd_driver, mxcnd_probe);
}
static void __exit mxc_nd_cleanup(void)
#include <mach/gpmc.h>
#include <mach/onenand.h>
#include <mach/gpio.h>
-#include <mach/pm.h>
#include <mach/dma.h>
#ifdef CONFIG_EISA
static struct eisa_device_id el3_eisa_ids[] = {
+ { "TCM5090" },
+ { "TCM5091" },
{ "TCM5092" },
{ "TCM5093" },
+ { "TCM5094" },
{ "TCM5095" },
+ { "TCM5098" },
{ "" }
};
MODULE_DEVICE_TABLE(eisa, el3_eisa_ids);
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_SEEQ8005) += seeq8005.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
-obj-$(CONFIG_MAC8390) += mac8390.o 8390.o
+obj-$(CONFIG_MAC8390) += mac8390.o
obj-$(CONFIG_APNE) += apne.o 8390.o
obj-$(CONFIG_PCMCIA_PCNET) += 8390.o
obj-$(CONFIG_HP100) += hp100.o
debug_desc(phys, desc);
BUG_ON(phys & 0x1F);
qmgr_put_entry(queue, phys);
- BUG_ON(qmgr_stat_overflow(queue));
+ /* Don't check for queue overflow here, we've allocated sufficient
+ length and queues >= 32 don't support this check anyway. */
}
#endif
napi_complete(napi);
qmgr_enable_irq(rxq);
- if (!qmgr_stat_empty(rxq) &&
- napi_reschedule(napi)) {
+ if (!qmgr_stat_below_low_watermark(rxq) &&
+ napi_reschedule(napi)) { /* not empty again */
#if DEBUG_RX
printk(KERN_DEBUG "%s: eth_poll"
" napi_reschedule successed\n",
port->tx_buff_tab[n_desc] = NULL;
}
- start = qmgr_stat_empty(port->plat->txreadyq);
+ start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
queue_put_desc(port->plat->txreadyq, phys, desc);
- if (start) {
+ if (start) { /* TX-ready queue was empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
port->netdev->name);
queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
dev->trans_start = jiffies;
- if (qmgr_stat_empty(txreadyq)) {
+ if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
#endif
netif_stop_queue(dev);
/* we could miss TX ready interrupt */
- if (!qmgr_stat_empty(txreadyq)) {
+ /* really empty in fact */
+ if (!qmgr_stat_below_low_watermark(txreadyq)) {
#if DEBUG_TX
printk(KERN_DEBUG "%s: eth_xmit ready again\n",
dev->name);
int err;
err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0,
- "%s:RX-free", port->netdev->name);
+ "%s:RX-free", port->netdev->name);
if (err)
return err;
err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0,
- "%s:RX", port->netdev->name);
+ "%s:RX", port->netdev->name);
if (err)
goto rel_rxfree;
err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0,
- "%s:TX", port->netdev->name);
+ "%s:TX", port->netdev->name);
if (err)
goto rel_rx;
err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0,
- "%s:TX-ready", port->netdev->name);
+ "%s:TX-ready", port->netdev->name);
if (err)
goto rel_tx;
/* TX-done queue handles skbs sent out by the NPEs */
if (!ports_open) {
err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0,
- "%s:TX-done", DRV_NAME);
+ "%s:TX-done", DRV_NAME);
if (err)
goto rel_txready;
}
*/
static struct pci_device_id atl1e_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)},
/* required last entry */
{ 0 }
};
#include "atl1.h"
+#define ATLX_DRIVER_VERSION "2.1.3"
+MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
+ Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ATLX_DRIVER_VERSION);
+
/* Temporary hack for merging atl1 and atl2 */
#include "atlx.c"
#include <linux/module.h>
#include <linux/types.h>
-#define ATLX_DRIVER_VERSION "2.1.3"
-MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
- Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(ATLX_DRIVER_VERSION);
-
#define ATLX_ERR_PHY 2
#define ATLX_ERR_PHY_SPEED 7
#define ATLX_ERR_PHY_RES 8
return 0;
}
-static const struct net_device_ops bfin_mac_netdev_ops = {
- .ndo_open = bfin_mac_open,
- .ndo_stop = bfin_mac_close,
- .ndo_start_xmit = bfin_mac_hard_start_xmit,
- .ndo_set_mac_address = bfin_mac_set_mac_address,
- .ndo_tx_timeout = bfin_mac_timeout,
- .ndo_set_multicast_list = bfin_mac_set_multicast_list,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = bfin_mac_poll,
-#endif
-};
-
/*
- *
* this makes the board clean up everything that it can
* and not talk to the outside world. Caused by
* an 'ifconfig ethX down'
return 0;
}
+static const struct net_device_ops bfin_mac_netdev_ops = {
+ .ndo_open = bfin_mac_open,
+ .ndo_stop = bfin_mac_close,
+ .ndo_start_xmit = bfin_mac_hard_start_xmit,
+ .ndo_set_mac_address = bfin_mac_set_mac_address,
+ .ndo_tx_timeout = bfin_mac_timeout,
+ .ndo_set_multicast_list = bfin_mac_set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = bfin_mac_poll,
+#endif
+};
+
static int __devinit bfin_mac_probe(struct platform_device *pdev)
{
struct net_device *ndev;
struct page *page;
void *va;
unsigned int offset;
- u64 *p_cnt;
- DECLARE_PCI_UNMAP_ADDR(mapping);
+ unsigned long *p_cnt;
+ dma_addr_t mapping;
};
struct rx_desc;
for_each_port(adapter, i) {
struct net_device *dev = adapter->port[i];
struct port_info *p = netdev_priv(dev);
+ int link_fault;
spin_lock_irq(&adapter->work_lock);
- if (p->link_fault) {
+ link_fault = p->link_fault;
+ spin_unlock_irq(&adapter->work_lock);
+
+ if (link_fault) {
t3_link_fault(adapter, i);
- spin_unlock_irq(&adapter->work_lock);
continue;
}
- spin_unlock_irq(&adapter->work_lock);
if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) {
t3_xgm_intr_disable(adapter, i);
(*d->pg_chunk.p_cnt)--;
if (!*d->pg_chunk.p_cnt)
pci_unmap_page(pdev,
- pci_unmap_addr(&d->pg_chunk, mapping),
+ d->pg_chunk.mapping,
q->alloc_size, PCI_DMA_FROMDEVICE);
put_page(d->pg_chunk.page);
q->pg_chunk.offset = 0;
mapping = pci_map_page(adapter->pdev, q->pg_chunk.page,
0, q->alloc_size, PCI_DMA_FROMDEVICE);
- pci_unmap_addr_set(&q->pg_chunk, mapping, mapping);
+ q->pg_chunk.mapping = mapping;
}
sd->pg_chunk = q->pg_chunk;
nomem: q->alloc_failed++;
break;
}
- mapping = pci_unmap_addr(&sd->pg_chunk, mapping) +
- sd->pg_chunk.offset;
+ mapping = sd->pg_chunk.mapping + sd->pg_chunk.offset;
pci_unmap_addr_set(sd, dma_addr, mapping);
add_one_rx_chunk(mapping, d, q->gen);
(*sd->pg_chunk.p_cnt)--;
if (!*sd->pg_chunk.p_cnt)
pci_unmap_page(adap->pdev,
- pci_unmap_addr(&sd->pg_chunk, mapping),
+ sd->pg_chunk.mapping,
fl->alloc_size,
PCI_DMA_FROMDEVICE);
if (!skb) {
(*sd->pg_chunk.p_cnt)--;
if (!*sd->pg_chunk.p_cnt)
pci_unmap_page(adap->pdev,
- pci_unmap_addr(&sd->pg_chunk, mapping),
+ sd->pg_chunk.mapping,
fl->alloc_size,
PCI_DMA_FROMDEVICE);
A_XGM_INT_STATUS + mac->offset);
link_fault &= F_LINKFAULTCHANGE;
+ link_ok = lc->link_ok;
+ speed = lc->speed;
+ duplex = lc->duplex;
+ fc = lc->fc;
+
phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
if (link_fault) {
PCI_DMA_FROMDEVICE);
length = le16_to_cpu(rx_desc->length);
-
- if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
+ /* !EOP means multiple descriptors were used to store a single
+ * packet, also make sure the frame isn't just CRC only */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
" buffers\n", netdev->name);
};
static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED;
+/*
+ * Power down phy when interface is down (persists through reboot;
+ * older Linux and other OSes may not power it up again)
+ */
+static int phy_power_down = 0;
+
static inline struct fe_priv *get_nvpriv(struct net_device *dev)
{
return netdev_priv(dev);
/* restart auto negotiation, power down phy */
mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
- mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE | BMCR_PDOWN);
+ mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
+ if (phy_power_down) {
+ mii_control |= BMCR_PDOWN;
+ }
if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
return PHY_ERROR;
}
nv_drain_rxtx(dev);
- if (np->wolenabled) {
+ if (np->wolenabled || !phy_power_down) {
writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
nv_start_rx(dev);
} else {
MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0.");
module_param(phy_cross, int, 0);
MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
+module_param(phy_power_down, int, 0);
+MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0).");
MODULE_AUTHOR("Manfred Spraul <manfred@colorfullife.com>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");
if (unlikely(!newskb))
newskb = skb;
- else if (skb)
+ else if (skb) {
+ /*
+ * We need to reset ->data to what it
+ * was before gfar_new_skb() re-aligned
+ * it to an RXBUF_ALIGNMENT boundary
+ * before we put the skb back on the
+ * recycle list.
+ */
+ skb->data = skb->head + NET_SKB_PAD;
__skb_queue_head(&priv->rx_recycle, skb);
+ }
} else {
/* Increment the number of packets */
dev->stats.rx_packets++;
(IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \
IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \
| IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \
- | IEVENT_MAG)
+ | IEVENT_MAG | IEVENT_BABR)
#define IMASK_INIT_CLEAR 0x00000000
#define IMASK_BABR 0x80000000
if (!MACH_IS_MAC)
return ERR_PTR(-ENODEV);
- dev = alloc_ei_netdev();
+ dev = ____alloc_ei_netdev(0);
if (!dev)
return ERR_PTR(-ENOMEM);
static const struct net_device_ops mac8390_netdev_ops = {
.ndo_open = mac8390_open,
.ndo_stop = mac8390_close,
- .ndo_start_xmit = ei_start_xmit,
- .ndo_tx_timeout = ei_tx_timeout,
- .ndo_get_stats = ei_get_stats,
- .ndo_set_multicast_list = ei_set_multicast_list,
+ .ndo_start_xmit = __ei_start_xmit,
+ .ndo_tx_timeout = __ei_tx_timeout,
+ .ndo_get_stats = __ei_get_stats,
+ .ndo_set_multicast_list = __ei_set_multicast_list,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
+ .ndo_poll_controller = __ei_poll,
#endif
};
INC_PERF_COUNTER(priv->pstats.tx_poll);
- if (!spin_trylock(&ring->comp_lock)) {
+ if (!spin_trylock_irq(&ring->comp_lock)) {
mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
return;
}
if (inflight && priv->port_up)
mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
- spin_unlock(&ring->comp_lock);
+ spin_unlock_irq(&ring->comp_lock);
}
static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv,
/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
- if (spin_trylock(&ring->comp_lock)) {
+ if (spin_trylock_irq(&ring->comp_lock)) {
mlx4_en_process_tx_cq(priv->dev, cq);
- spin_unlock(&ring->comp_lock);
+ spin_unlock_irq(&ring->comp_lock);
}
}
int handled = 0;
int status;
+ /* loop handling interrupts until we have no new ones or
+ * we hit a invalid/hotplug case.
+ */
status = RTL_R16(IntrStatus);
+ while (status && status != 0xffff) {
+ handled = 1;
- /* hotplug/major error/no more work/shared irq */
- if ((status == 0xffff) || !status)
- goto out;
-
- handled = 1;
+ /* Handle all of the error cases first. These will reset
+ * the chip, so just exit the loop.
+ */
+ if (unlikely(!netif_running(dev))) {
+ rtl8169_asic_down(ioaddr);
+ break;
+ }
- if (unlikely(!netif_running(dev))) {
- rtl8169_asic_down(ioaddr);
- goto out;
- }
+ /* Work around for rx fifo overflow */
+ if (unlikely(status & RxFIFOOver) &&
+ (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
+ netif_stop_queue(dev);
+ rtl8169_tx_timeout(dev);
+ break;
+ }
- status &= tp->intr_mask;
- RTL_W16(IntrStatus,
- (status & RxFIFOOver) ? (status | RxOverflow) : status);
+ if (unlikely(status & SYSErr)) {
+ rtl8169_pcierr_interrupt(dev);
+ break;
+ }
- if (!(status & tp->intr_event))
- goto out;
+ if (status & LinkChg)
+ rtl8169_check_link_status(dev, tp, ioaddr);
- /* Work around for rx fifo overflow */
- if (unlikely(status & RxFIFOOver) &&
- (tp->mac_version == RTL_GIGA_MAC_VER_11)) {
- netif_stop_queue(dev);
- rtl8169_tx_timeout(dev);
- goto out;
- }
+ /* We need to see the lastest version of tp->intr_mask to
+ * avoid ignoring an MSI interrupt and having to wait for
+ * another event which may never come.
+ */
+ smp_rmb();
+ if (status & tp->intr_mask & tp->napi_event) {
+ RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
+ tp->intr_mask = ~tp->napi_event;
+
+ if (likely(napi_schedule_prep(&tp->napi)))
+ __napi_schedule(&tp->napi);
+ else if (netif_msg_intr(tp)) {
+ printk(KERN_INFO "%s: interrupt %04x in poll\n",
+ dev->name, status);
+ }
+ }
- if (unlikely(status & SYSErr)) {
- rtl8169_pcierr_interrupt(dev);
- goto out;
+ /* We only get a new MSI interrupt when all active irq
+ * sources on the chip have been acknowledged. So, ack
+ * everything we've seen and check if new sources have become
+ * active to avoid blocking all interrupts from the chip.
+ */
+ RTL_W16(IntrStatus,
+ (status & RxFIFOOver) ? (status | RxOverflow) : status);
+ status = RTL_R16(IntrStatus);
}
- if (status & LinkChg)
- rtl8169_check_link_status(dev, tp, ioaddr);
-
- if (status & tp->napi_event) {
- RTL_W16(IntrMask, tp->intr_event & ~tp->napi_event);
- tp->intr_mask = ~tp->napi_event;
-
- if (likely(napi_schedule_prep(&tp->napi)))
- __napi_schedule(&tp->napi);
- else if (netif_msg_intr(tp)) {
- printk(KERN_INFO "%s: interrupt %04x in poll\n",
- dev->name, status);
- }
- }
-out:
return IRQ_RETVAL(handled);
}
if (work_done < budget) {
napi_complete(napi);
- tp->intr_mask = 0xffff;
- /*
- * 20040426: the barrier is not strictly required but the
- * behavior of the irq handler could be less predictable
- * without it. Btw, the lack of flush for the posted pci
- * write is safe - FR
+
+ /* We need for force the visibility of tp->intr_mask
+ * for other CPUs, as we can loose an MSI interrupt
+ * and potentially wait for a retransmit timeout if we don't.
+ * The posted write to IntrMask is safe, as it will
+ * eventually make it to the chip and we won't loose anything
+ * until it does.
*/
+ tp->intr_mask = 0xffff;
smp_wmb();
RTL_W16(IntrMask, tp->intr_event);
}
debug_desc(phys, desc);
BUG_ON(phys & 0x1F);
qmgr_put_entry(queue, phys);
- BUG_ON(qmgr_stat_overflow(queue));
+ /* Don't check for queue overflow here, we've allocated sufficient
+ length and queues >= 32 don't support this check anyway. */
}
free_buffer_irq(port->tx_buff_tab[n_desc]);
port->tx_buff_tab[n_desc] = NULL;
- start = qmgr_stat_empty(port->plat->txreadyq);
+ start = qmgr_stat_below_low_watermark(port->plat->txreadyq);
queue_put_desc(port->plat->txreadyq,
tx_desc_phys(port, n_desc), desc);
- if (start) {
+ if (start) { /* TX-ready queue was empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
" ready\n", dev->name);
queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
dev->trans_start = jiffies;
- if (qmgr_stat_empty(txreadyq)) {
+ if (qmgr_stat_below_low_watermark(txreadyq)) { /* empty */
#if DEBUG_TX
printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
#endif
netif_stop_queue(dev);
/* we could miss TX ready interrupt */
- if (!qmgr_stat_empty(txreadyq)) {
+ if (!qmgr_stat_below_low_watermark(txreadyq)) {
#if DEBUG_TX
printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
dev->name);
#ifdef CONFIG_PM
struct usb_device *usb_dev = i2400mu->usb_dev;
#endif
+ unsigned is_autosuspend = 0;
struct i2400m *i2400m = &i2400mu->i2400m;
+#ifdef CONFIG_PM
+ if (usb_dev->auto_pm > 0)
+ is_autosuspend = 1;
+#endif
+
d_fnstart(3, dev, "(iface %p pm_msg %u)\n", iface, pm_msg.event);
if (i2400m->updown == 0)
goto no_firmware;
- d_printf(1, dev, "fw up, requesting standby\n");
+ if (i2400m->state == I2400M_SS_DATA_PATH_CONNECTED && is_autosuspend) {
+ /* ugh -- the device is connected and this suspend
+ * request is an autosuspend one (not a system standby
+ * / hibernate).
+ *
+ * The only way the device can go to standby is if the
+ * link with the base station is in IDLE mode; that
+ * were the case, we'd be in status
+ * I2400M_SS_CONNECTED_IDLE. But we are not.
+ *
+ * If we *tell* him to go power save now, it'll reset
+ * as a precautionary measure, so if this is an
+ * autosuspend thing, say no and it'll come back
+ * later, when the link is IDLE
+ */
+ result = -EBADF;
+ d_printf(1, dev, "fw up, link up, not-idle, autosuspend: "
+ "not entering powersave\n");
+ goto error_not_now;
+ }
+ d_printf(1, dev, "fw up: entering powersave\n");
atomic_dec(&i2400mu->do_autopm);
result = i2400m_cmd_enter_powersave(i2400m);
atomic_inc(&i2400mu->do_autopm);
-#ifdef CONFIG_PM
- if (result < 0 && usb_dev->auto_pm == 0) {
+ if (result < 0 && !is_autosuspend) {
/* System suspend, can't fail */
dev_err(dev, "failed to suspend, will reset on resume\n");
result = 0;
}
-#endif
if (result < 0)
goto error_enter_powersave;
i2400mu_notification_release(i2400mu);
- d_printf(1, dev, "fw up, got standby\n");
+ d_printf(1, dev, "powersave requested\n");
error_enter_powersave:
+error_not_now:
no_firmware:
d_fnend(3, dev, "(iface %p pm_msg %u) = %d\n",
iface, pm_msg.event, result);
ASUS P5B Deluxe
Toshiba Satellite Pro series of laptops
Asus Wireless Link
+ Linksys WUSB54GC-EU
Thanks to Realtek for their support!
{
struct airo_info *local = dev->ml_priv;
int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ int wep_key_len;
u8 buf[16];
if (!local->wep_capable)
dwrq->flags |= index + 1;
/* Copy the key to the user buffer */
- dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf));
- if (dwrq->length != -1)
- memcpy(extra, buf, dwrq->length);
- else
+ wep_key_len = get_wep_key(local, index, &buf[0], sizeof(buf));
+ if (wep_key_len < 0) {
dwrq->length = 0;
+ } else {
+ dwrq->length = wep_key_len;
+ memcpy(extra, buf, dwrq->length);
+ }
return 0;
}
struct airo_info *local = dev->ml_priv;
struct iw_point *encoding = &wrqu->encoding;
struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;
- int idx, max_key_len;
+ int idx, max_key_len, wep_key_len;
u8 buf[16];
if (!local->wep_capable)
memset(extra, 0, 16);
/* Copy the key to the user buffer */
- ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
- if (ext->key_len != -1)
- memcpy(extra, buf, ext->key_len);
- else
+ wep_key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
+ if (wep_key_len < 0) {
ext->key_len = 0;
+ } else {
+ ext->key_len = wep_key_len;
+ memcpy(extra, buf, ext->key_len);
+ }
return 0;
}
if (ret != CMD_STATUS_COMPLETE) {
queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan,
SCAN_POLL_INTERVAL);
- goto exit;
+ mutex_unlock(&priv->mtx);
+ return;
}
- ieee80211_scan_completed(priv->hw, false);
-
if (is_valid_ether_addr(priv->bssid))
at76_join(priv);
- ieee80211_wake_queues(priv->hw);
-
-exit:
mutex_unlock(&priv->mtx);
+
+ ieee80211_scan_completed(priv->hw, false);
+
+ ieee80211_wake_queues(priv->hw);
}
static int at76_hw_scan(struct ieee80211_hw *hw,
{
s8 tmp;
s16 min_pwrL, min_pwrR;
- s16 pwr_i = pwrL[0];
-
- do {
- pwr_i--;
- tmp = (s8) ath5k_get_interpolated_value(pwr_i,
- pwrL[0], pwrL[1],
- stepL[0], stepL[1]);
-
- } while (tmp > 1);
-
- min_pwrL = pwr_i;
-
- pwr_i = pwrR[0];
- do {
- pwr_i--;
- tmp = (s8) ath5k_get_interpolated_value(pwr_i,
- pwrR[0], pwrR[1],
- stepR[0], stepR[1]);
-
- } while (tmp > 1);
+ s16 pwr_i;
+
+ if (pwrL[0] == pwrL[1])
+ min_pwrL = pwrL[0];
+ else {
+ pwr_i = pwrL[0];
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrL[0], pwrL[1],
+ stepL[0], stepL[1]);
+ } while (tmp > 1);
+
+ min_pwrL = pwr_i;
+ }
- min_pwrR = pwr_i;
+ if (pwrR[0] == pwrR[1])
+ min_pwrR = pwrR[0];
+ else {
+ pwr_i = pwrR[0];
+ do {
+ pwr_i--;
+ tmp = (s8) ath5k_get_interpolated_value(pwr_i,
+ pwrR[0], pwrR[1],
+ stepR[0], stepR[1]);
+ } while (tmp > 1);
+
+ min_pwrR = pwr_i;
+ }
/* Keep the right boundary so that it works for both curves */
return max(min_pwrL, min_pwrR);
\*****************************/
#include <linux/pci.h> /* To determine if a card is pci-e */
-#include <linux/bitops.h> /* For get_bitmask_order */
+#include <linux/log2.h>
#include "ath5k.h"
#include "reg.h"
#include "base.h"
/* Get exponent
* ALGO: coef_exp = 14 - highest set bit position */
- coef_exp = get_bitmask_order(coef_scaled);
+ coef_exp = ilog2(coef_scaled);
/* Doesn't make sense if it's zero*/
- if (!coef_exp)
+ if (!coef_scaled || !coef_exp)
return -EINVAL;
/* Note: we've shifted coef_scaled by 24 */
mode |= AR5K_PHY_MODE_FREQ_5GHZ;
if (ah->ah_radio == AR5K_RF5413)
- clock |= AR5K_PHY_PLL_40MHZ_5413;
+ clock = AR5K_PHY_PLL_40MHZ_5413;
else
clock |= AR5K_PHY_PLL_40MHZ;
#include "iwl-6000-hw.h"
/* Highest firmware API version supported */
-#define IWL5000_UCODE_API_MAX 1
+#define IWL5000_UCODE_API_MAX 2
#define IWL5150_UCODE_API_MAX 2
/* Lowest firmware API version supported */
if (!iwl_is_ready_rf(priv))
return -EAGAIN;
- cancel_delayed_work(&priv->scan_check);
- if (iwl_scan_cancel_timeout(priv, 100)) {
- IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
- IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
- return -EAGAIN;
- }
-
iwl_commit_rxon(priv);
return 0;
/* The HW is no longer scanning */
clear_bit(STATUS_SCAN_HW, &priv->status);
- /* The scan completion notification came in, so kill that timer... */
- cancel_delayed_work(&priv->scan_check);
-
IWL_DEBUG_INFO(priv, "Scan pass on %sGHz took %dms\n",
(priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ?
"2.4" : "5.2",
mutex_lock(&priv->mutex);
+ cancel_delayed_work(&priv->scan_check);
+
if (!iwl_is_ready(priv)) {
IWL_WARN(priv, "request scan called when driver not ready.\n");
goto done;
IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
+ cancel_delayed_work(&priv->scan_check);
+
ieee80211_scan_completed(priv->hw, false);
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
if (!iwl_is_ready_rf(priv))
return -EAGAIN;
- cancel_delayed_work(&priv->scan_check);
- if (iwl_scan_cancel_timeout(priv, 100)) {
- IWL_WARN(priv, "Aborted scan still in progress after 100ms\n");
- IWL_DEBUG_MAC80211(priv, "leaving - scan abort failed.\n");
- return -EAGAIN;
- }
-
iwl3945_commit_rxon(priv);
return 0;
mutex_lock(&priv->mutex);
+ cancel_delayed_work(&priv->scan_check);
+
if (!iwl_is_ready(priv)) {
IWL_WARN(priv, "request scan called when driver not ready.\n");
goto done;
if (cipher == CIPHER_TKIP_NO_MIC)
cipher = CIPHER_TKIP;
- if (cipher == CIPHER_NONE || cipher > CIPHER_MAX)
+ if (cipher == CIPHER_NONE || cipher >= CIPHER_MAX)
return;
/* Remove CIPHER_NONE index */
{USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
/* AirLive */
{USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
+ /* Linksys */
+ {USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B},
{}
};
op_ring_buffer_write = NULL;
}
+#define RB_EVENT_HDR_SIZE 4
+
int alloc_cpu_buffers(void)
{
int i;
unsigned long buffer_size = oprofile_cpu_buffer_size;
+ unsigned long byte_size = buffer_size * (sizeof(struct op_sample) +
+ RB_EVENT_HDR_SIZE);
- op_ring_buffer_read = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS);
+ op_ring_buffer_read = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS);
if (!op_ring_buffer_read)
goto fail;
- op_ring_buffer_write = ring_buffer_alloc(buffer_size, OP_BUFFER_FLAGS);
+ op_ring_buffer_write = ring_buffer_alloc(byte_size, OP_BUFFER_FLAGS);
if (!op_ring_buffer_write)
goto fail;
unsigned long port;
if (!dev->irq) {
- printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
- dev->hpa.start);
+ printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
* pardevice fields. -arca
*/
port->ops->init_state(tmp, tmp->state);
- parport_device_proc_register(tmp);
+ if (!test_and_set_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags)) {
+ port->proc_device = tmp;
+ parport_device_proc_register(tmp);
+ }
return tmp;
out_free_all:
}
#endif
- parport_device_proc_unregister(dev);
-
port = dev->port->physport;
+ if (port->proc_device == dev) {
+ port->proc_device = NULL;
+ clear_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags);
+ parport_device_proc_unregister(dev);
+ }
+
if (port->cad == dev) {
printk(KERN_DEBUG "%s: %s forgot to release port\n",
port->name, dev->name);
struct acpiphp_bridge *bridge; /* Ejectable PCI-to-PCI bridge */
struct list_head sibling;
- struct pci_dev *pci_dev;
struct notifier_block nb;
acpi_handle handle;
/*
* Lifetime rules for pci_dev:
- * - The one in acpiphp_func has its refcount elevated by pci_get_slot()
- * when the driver is loaded or when an insertion event occurs. It loses
- * a refcount when its ejected or the driver unloads.
* - The one in acpiphp_bridge has its refcount elevated by pci_get_slot()
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
unsigned long long adr, sun;
int device, function, retval;
struct pci_bus *pbus = bridge->pci_bus;
+ struct pci_dev *pdev;
if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
return AE_OK;
newfunc->slot = slot;
list_add_tail(&newfunc->sibling, &slot->funcs);
- /* associate corresponding pci_dev */
- newfunc->pci_dev = pci_get_slot(pbus, PCI_DEVFN(device, function));
- if (newfunc->pci_dev) {
+ pdev = pci_get_slot(pbus, PCI_DEVFN(device, function));
+ if (pdev) {
slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
+ pci_dev_put(pdev);
}
if (is_dock_device(handle)) {
if (ACPI_FAILURE(status))
err("failed to remove notify handler\n");
}
- pci_dev_put(func->pci_dev);
list_del(list);
kfree(func);
}
pci_enable_bridges(bus);
pci_bus_add_devices(bus);
- /* associate pci_dev to our representation */
list_for_each (l, &slot->funcs) {
func = list_entry(l, struct acpiphp_func, sibling);
- func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
- func->function));
- if (!func->pci_dev)
+ dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
+ func->function));
+ if (!dev)
continue;
- if (func->pci_dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
- func->pci_dev->hdr_type != PCI_HEADER_TYPE_CARDBUS)
+ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
+ dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) {
+ pci_dev_put(dev);
continue;
+ }
status = find_p2p_bridge(func->handle, (u32)1, bus, NULL);
if (ACPI_FAILURE(status))
warn("find_p2p_bridge failed (error code = 0x%x)\n",
status);
+ pci_dev_put(dev);
}
slot->flags |= SLOT_ENABLED;
*/
static int disable_device(struct acpiphp_slot *slot)
{
- int retval = 0;
struct acpiphp_func *func;
- struct list_head *l;
+ struct pci_dev *pdev;
/* is this slot already disabled? */
if (!(slot->flags & SLOT_ENABLED))
goto err_exit;
- list_for_each (l, &slot->funcs) {
- func = list_entry(l, struct acpiphp_func, sibling);
-
+ list_for_each_entry(func, &slot->funcs, sibling) {
if (func->bridge) {
/* cleanup p2p bridges under this P2P bridge */
cleanup_p2p_bridge(func->bridge->handle,
func->bridge = NULL;
}
- if (func->pci_dev) {
- pci_stop_bus_device(func->pci_dev);
- if (func->pci_dev->subordinate) {
- disable_bridges(func->pci_dev->subordinate);
- pci_disable_device(func->pci_dev);
+ pdev = pci_get_slot(slot->bridge->pci_bus,
+ PCI_DEVFN(slot->device, func->function));
+ if (pdev) {
+ pci_stop_bus_device(pdev);
+ if (pdev->subordinate) {
+ disable_bridges(pdev->subordinate);
+ pci_disable_device(pdev);
}
+ pci_remove_bus_device(pdev);
+ pci_dev_put(pdev);
}
}
- list_for_each (l, &slot->funcs) {
- func = list_entry(l, struct acpiphp_func, sibling);
-
+ list_for_each_entry(func, &slot->funcs, sibling) {
acpiphp_unconfigure_ioapics(func->handle);
acpiphp_bus_trim(func->handle);
- /* try to remove anyway.
- * acpiphp_bus_add might have been failed */
-
- if (!func->pci_dev)
- continue;
-
- pci_remove_bus_device(func->pci_dev);
- pci_dev_put(func->pci_dev);
- func->pci_dev = NULL;
}
slot->flags &= (~SLOT_ENABLED);
- err_exit:
- return retval;
+err_exit:
+ return 0;
}
#include <linux/module.h>
#include <linux/rtc.h>
#include <linux/platform_device.h>
-#include <mach/hardware.h>
+#include <linux/io.h>
+
+#define EP93XX_RTC_DATA 0x000
+#define EP93XX_RTC_MATCH 0x004
+#define EP93XX_RTC_STATUS 0x008
+#define EP93XX_RTC_STATUS_INTR (1<<0)
+#define EP93XX_RTC_LOAD 0x00C
+#define EP93XX_RTC_CONTROL 0x010
+#define EP93XX_RTC_CONTROL_MIE (1<<0)
+#define EP93XX_RTC_SWCOMP 0x108
+#define EP93XX_RTC_SWCOMP_DEL_MASK 0x001f0000
+#define EP93XX_RTC_SWCOMP_DEL_SHIFT 16
+#define EP93XX_RTC_SWCOMP_INT_MASK 0x0000ffff
+#define EP93XX_RTC_SWCOMP_INT_SHIFT 0
+
+#define DRV_VERSION "0.3"
-#define EP93XX_RTC_REG(x) (EP93XX_RTC_BASE + (x))
-#define EP93XX_RTC_DATA EP93XX_RTC_REG(0x0000)
-#define EP93XX_RTC_LOAD EP93XX_RTC_REG(0x000C)
-#define EP93XX_RTC_SWCOMP EP93XX_RTC_REG(0x0108)
-
-#define DRV_VERSION "0.2"
+/*
+ * struct device dev.platform_data is used to store our private data
+ * because struct rtc_device does not have a variable to hold it.
+ */
+struct ep93xx_rtc {
+ void __iomem *mmio_base;
+};
-static int ep93xx_get_swcomp(struct device *dev, unsigned short *preload,
+static int ep93xx_rtc_get_swcomp(struct device *dev, unsigned short *preload,
unsigned short *delete)
{
- unsigned short comp = __raw_readl(EP93XX_RTC_SWCOMP);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+ unsigned long comp;
+
+ comp = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_SWCOMP);
if (preload)
- *preload = comp & 0xffff;
+ *preload = (comp & EP93XX_RTC_SWCOMP_INT_MASK)
+ >> EP93XX_RTC_SWCOMP_INT_SHIFT;
if (delete)
- *delete = (comp >> 16) & 0x1f;
+ *delete = (comp & EP93XX_RTC_SWCOMP_DEL_MASK)
+ >> EP93XX_RTC_SWCOMP_DEL_SHIFT;
return 0;
}
static int ep93xx_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- unsigned long time = __raw_readl(EP93XX_RTC_DATA);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+ unsigned long time;
+
+ time = __raw_readl(ep93xx_rtc->mmio_base + EP93XX_RTC_DATA);
rtc_time_to_tm(time, tm);
return 0;
static int ep93xx_rtc_set_mmss(struct device *dev, unsigned long secs)
{
- __raw_writel(secs + 1, EP93XX_RTC_LOAD);
+ struct ep93xx_rtc *ep93xx_rtc = dev->platform_data;
+
+ __raw_writel(secs + 1, ep93xx_rtc->mmio_base + EP93XX_RTC_LOAD);
return 0;
}
{
unsigned short preload, delete;
- ep93xx_get_swcomp(dev, &preload, &delete);
+ ep93xx_rtc_get_swcomp(dev, &preload, &delete);
seq_printf(seq, "preload\t\t: %d\n", preload);
seq_printf(seq, "delete\t\t: %d\n", delete);
.proc = ep93xx_rtc_proc,
};
-static ssize_t ep93xx_sysfs_show_comp_preload(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_preload(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned short preload;
- ep93xx_get_swcomp(dev, &preload, NULL);
+ ep93xx_rtc_get_swcomp(dev, &preload, NULL);
return sprintf(buf, "%d\n", preload);
}
-static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_sysfs_show_comp_preload, NULL);
+static DEVICE_ATTR(comp_preload, S_IRUGO, ep93xx_rtc_show_comp_preload, NULL);
-static ssize_t ep93xx_sysfs_show_comp_delete(struct device *dev,
+static ssize_t ep93xx_rtc_show_comp_delete(struct device *dev,
struct device_attribute *attr, char *buf)
{
unsigned short delete;
- ep93xx_get_swcomp(dev, NULL, &delete);
+ ep93xx_rtc_get_swcomp(dev, NULL, &delete);
return sprintf(buf, "%d\n", delete);
}
-static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_sysfs_show_comp_delete, NULL);
+static DEVICE_ATTR(comp_delete, S_IRUGO, ep93xx_rtc_show_comp_delete, NULL);
-static int __devinit ep93xx_rtc_probe(struct platform_device *dev)
+static int __init ep93xx_rtc_probe(struct platform_device *pdev)
{
- struct rtc_device *rtc = rtc_device_register("ep93xx",
- &dev->dev, &ep93xx_rtc_ops, THIS_MODULE);
+ struct ep93xx_rtc *ep93xx_rtc;
+ struct resource *res;
+ struct rtc_device *rtc;
+ int err;
+
+ ep93xx_rtc = kzalloc(sizeof(struct ep93xx_rtc), GFP_KERNEL);
+ if (ep93xx_rtc == NULL)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -ENXIO;
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (res == NULL)
+ return -EBUSY;
+
+ ep93xx_rtc->mmio_base = ioremap(res->start, resource_size(res));
+ if (ep93xx_rtc->mmio_base == NULL) {
+ err = -ENXIO;
+ goto fail;
+ }
+ pdev->dev.platform_data = ep93xx_rtc;
+
+ rtc = rtc_device_register(pdev->name,
+ &pdev->dev, &ep93xx_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc)) {
- return PTR_ERR(rtc);
+ err = PTR_ERR(rtc);
+ goto fail;
}
- platform_set_drvdata(dev, rtc);
+ platform_set_drvdata(pdev, rtc);
- device_create_file(&dev->dev, &dev_attr_comp_preload);
- device_create_file(&dev->dev, &dev_attr_comp_delete);
+ err = device_create_file(&pdev->dev, &dev_attr_comp_preload);
+ if (err)
+ goto fail;
+ err = device_create_file(&pdev->dev, &dev_attr_comp_delete);
+ if (err) {
+ device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+ goto fail;
+ }
return 0;
+
+fail:
+ if (ep93xx_rtc->mmio_base) {
+ iounmap(ep93xx_rtc->mmio_base);
+ pdev->dev.platform_data = NULL;
+ }
+ release_mem_region(res->start, resource_size(res));
+ return err;
}
-static int __devexit ep93xx_rtc_remove(struct platform_device *dev)
+static int __exit ep93xx_rtc_remove(struct platform_device *pdev)
{
- struct rtc_device *rtc = platform_get_drvdata(dev);
+ struct rtc_device *rtc = platform_get_drvdata(pdev);
+ struct ep93xx_rtc *ep93xx_rtc = pdev->dev.platform_data;
+ struct resource *res;
+
+ /* cleanup sysfs */
+ device_remove_file(&pdev->dev, &dev_attr_comp_delete);
+ device_remove_file(&pdev->dev, &dev_attr_comp_preload);
+
+ rtc_device_unregister(rtc);
+
+ iounmap(ep93xx_rtc->mmio_base);
+ pdev->dev.platform_data = NULL;
- if (rtc)
- rtc_device_unregister(rtc);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
- platform_set_drvdata(dev, NULL);
+ platform_set_drvdata(pdev, NULL);
return 0;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:ep93xx-rtc");
-static struct platform_driver ep93xx_rtc_platform_driver = {
+static struct platform_driver ep93xx_rtc_driver = {
.driver = {
.name = "ep93xx-rtc",
.owner = THIS_MODULE,
},
- .probe = ep93xx_rtc_probe,
- .remove = __devexit_p(ep93xx_rtc_remove),
+ .remove = __exit_p(ep93xx_rtc_remove),
};
static int __init ep93xx_rtc_init(void)
{
- return platform_driver_register(&ep93xx_rtc_platform_driver);
+ return platform_driver_probe(&ep93xx_rtc_driver, ep93xx_rtc_probe);
}
static void __exit ep93xx_rtc_exit(void)
{
- platform_driver_unregister(&ep93xx_rtc_platform_driver);
+ platform_driver_unregister(&ep93xx_rtc_driver);
}
MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
goto err_rtc;
}
- rtc->base = ioremap(dev->res.start, SZ_4K);
+ rtc->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!rtc->base) {
ret = -ENOMEM;
goto err_map;
goto out;
}
- ldata->base = ioremap(adev->res.start,
- adev->res.end - adev->res.start + 1);
+ ldata->base = ioremap(adev->res.start, resource_size(&adev->res));
if (!ldata->base) {
ret = -ENOMEM;
goto out_no_remap;
unsigned char mcr;
unsigned char mcr_mask; /* mask of user bits */
unsigned char mcr_force; /* mask of forced bits */
+ unsigned char cur_iotype; /* Running I/O type */
/*
* Some bits in registers are cleared on a read, so they must
static void set_io_from_upio(struct uart_port *p)
{
+ struct uart_8250_port *up = (struct uart_8250_port *)p;
switch (p->iotype) {
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
p->serial_out = io_serial_out;
break;
}
+ /* Remember loaded iotype */
+ up->cur_iotype = p->iotype;
}
static void
up->capabilities = uart_config[up->port.type].flags;
up->mcr = 0;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (up->port.type == PORT_16C950) {
/* Wake up and initialize UART */
up->acr = 0;
if (ret < 0)
probeflags &= ~PROBE_RSA;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
{
int i;
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+ up->cur_iotype = 0xFF;
+ }
+
serial8250_isa_init_ports();
for (i = 0; i < nr_uarts; i++) {
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
printk(KERN_INFO
- "Serial: device 0x%lx not configured.\n"
+ "Serial: device 0x%llx not configured.\n"
"Enable support for Wax, Lasi, Asp or Dino.\n",
- dev->hpa.start);
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
goto out;
}
- base = ioremap(dev->res.start, PAGE_SIZE);
+ base = ioremap(dev->res.start, resource_size(&dev->res));
if (!base) {
ret = -ENOMEM;
goto free;
struct clk *clk;
unsigned int im; /* interrupt mask */
unsigned int old_status;
+ unsigned int ifls; /* vendor-specific */
+};
+
+/* There is by now at least one vendor with differing details, so handle it */
+struct vendor_data {
+ unsigned int ifls;
+ unsigned int fifosize;
+};
+
+static struct vendor_data vendor_arm = {
+ .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
+ .fifosize = 16,
+};
+
+static struct vendor_data vendor_st = {
+ .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
+ .fifosize = 64,
};
static void pl011_stop_tx(struct uart_port *port)
if (retval)
goto clk_dis;
- writew(UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
- uap->port.membase + UART011_IFLS);
+ writew(uap->ifls, uap->port.membase + UART011_IFLS);
/*
* Provoke TX FIFO interrupt into asserting.
static int pl011_probe(struct amba_device *dev, struct amba_id *id)
{
struct uart_amba_port *uap;
+ struct vendor_data *vendor = id->data;
void __iomem *base;
int i, ret;
goto out;
}
- base = ioremap(dev->res.start, PAGE_SIZE);
+ base = ioremap(dev->res.start, resource_size(&dev->res));
if (!base) {
ret = -ENOMEM;
goto free;
goto unmap;
}
+ uap->ifls = vendor->ifls;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
uap->port.iotype = UPIO_MEM;
uap->port.irq = dev->irq[0];
- uap->port.fifosize = 16;
+ uap->port.fifosize = vendor->fifosize;
uap->port.ops = &amba_pl011_pops;
uap->port.flags = UPF_BOOT_AUTOCONF;
uap->port.line = i;
{
.id = 0x00041011,
.mask = 0x000fffff,
+ .data = &vendor_arm,
+ },
+ {
+ .id = 0x00380802,
+ .mask = 0x00ffffff,
+ .data = &vendor_st,
},
{ 0, 0 },
};
uart_unregister_driver(&amba_reg);
}
-module_init(pl011_init);
+/*
+ * While this can be a module, if builtin it's most likely the console
+ * So let's leave module_exit but move module_init to an earlier place
+ */
+arch_initcall(pl011_init);
module_exit(pl011_exit);
MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
#define ONEMS 0xb0 /* One Millisecond register */
#define UTS 0xb4 /* UART Test Register */
#endif
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define BIPR1 0xb0 /* Incremental Preset Register 1 */
#define BIPR2 0xb4 /* Incremental Preset Register 2 */
#define BIPR3 0xb8 /* Incremental Preset Register 3 */
#define UCR1_RTSDEN (1<<5) /* RTS delta interrupt enable */
#define UCR1_SNDBRK (1<<4) /* Send break */
#define UCR1_TDMAEN (1<<3) /* Transmitter ready DMA enable */
-#if defined(CONFIG_ARCH_IMX) || defined(CONFIG_ARCH_MX1)
+#ifdef CONFIG_ARCH_MX1
#define UCR1_UARTCLKEN (1<<2) /* UART clock enabled */
#endif
#if defined CONFIG_ARCH_MX3 || defined CONFIG_ARCH_MX2
#define UCR3_RXDSEN (1<<6) /* Receive status interrupt enable */
#define UCR3_AIRINTEN (1<<5) /* Async IR wake interrupt enable */
#define UCR3_AWAKEN (1<<4) /* Async wake interrupt enable */
-#ifdef CONFIG_ARCH_IMX
+#ifdef CONFIG_ARCH_MX1
#define UCR3_REF25 (1<<3) /* Ref freq 25 MHz, only on mx1 */
#define UCR3_REF30 (1<<2) /* Ref Freq 30 MHz, only on mx1 */
#endif
#define UTS_SOFTRST (1<<0) /* Software reset */
/* We've been assigned a range on the "Low-density serial ports" major */
-#ifdef CONFIG_ARCH_IMX
-#define SERIAL_IMX_MAJOR 204
-#define MINOR_START 41
-#define DEV_NAME "ttySMX"
-#define MAX_INTERNAL_IRQ IMX_IRQS
-#endif
-
#ifdef CONFIG_ARCH_MXC
#define SERIAL_IMX_MAJOR 207
#define MINOR_START 16
if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
co->index = 0;
sport = imx_ports[co->index];
+ if(sport == NULL)
+ return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
co, co->index, options);
- if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+ if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
pr_debug("PSC%x out of range\n", co->index);
return -EINVAL;
}
config SPI_IMX
tristate "Freescale iMX SPI controller"
- depends on ARCH_IMX && EXPERIMENTAL
+ depends on ARCH_MX1 && EXPERIMENTAL
help
This enables using the Freescale iMX SPI controller in master
mode.
help
This enables using the SPI master controller on the Orion chips.
+config SPI_PL022
+ tristate "ARM AMBA PL022 SSP controller (EXPERIMENTAL)"
+ depends on ARM_AMBA && EXPERIMENTAL
+ default y if MACH_U300
+ help
+ This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
+ controller. If you have an embedded system with an AMBA(R)
+ bus and a PL022 controller, say Y or M here.
+
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
depends on ARCH_PXA && EXPERIMENTAL
obj-$(CONFIG_SPI_OMAP_UWIRE) += omap_uwire.o
obj-$(CONFIG_SPI_OMAP24XX) += omap2_mcspi.o
obj-$(CONFIG_SPI_ORION) += orion_spi.o
+obj-$(CONFIG_SPI_PL022) += amba-pl022.o
obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o
obj-$(CONFIG_SPI_MPC83xx) += spi_mpc83xx.o
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
--- /dev/null
+/*
+ * drivers/spi/amba-pl022.c
+ *
+ * A driver for the ARM PL022 PrimeCell SSP/SPI bus master.
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ * Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * TODO:
+ * - add timeout on polled transfers
+ * - add generic DMA framework support
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/ioport.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/spi/spi.h>
+#include <linux/workqueue.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+/*
+ * This macro is used to define some register default values.
+ * reg is masked with mask, the OR:ed with an (again masked)
+ * val shifted sb steps to the left.
+ */
+#define SSP_WRITE_BITS(reg, val, mask, sb) \
+ ((reg) = (((reg) & ~(mask)) | (((val)<<(sb)) & (mask))))
+
+/*
+ * This macro is also used to define some default values.
+ * It will just shift val by sb steps to the left and mask
+ * the result with mask.
+ */
+#define GEN_MASK_BITS(val, mask, sb) \
+ (((val)<<(sb)) & (mask))
+
+#define DRIVE_TX 0
+#define DO_NOT_DRIVE_TX 1
+
+#define DO_NOT_QUEUE_DMA 0
+#define QUEUE_DMA 1
+
+#define RX_TRANSFER 1
+#define TX_TRANSFER 2
+
+/*
+ * Macros to access SSP Registers with their offsets
+ */
+#define SSP_CR0(r) (r + 0x000)
+#define SSP_CR1(r) (r + 0x004)
+#define SSP_DR(r) (r + 0x008)
+#define SSP_SR(r) (r + 0x00C)
+#define SSP_CPSR(r) (r + 0x010)
+#define SSP_IMSC(r) (r + 0x014)
+#define SSP_RIS(r) (r + 0x018)
+#define SSP_MIS(r) (r + 0x01C)
+#define SSP_ICR(r) (r + 0x020)
+#define SSP_DMACR(r) (r + 0x024)
+#define SSP_ITCR(r) (r + 0x080)
+#define SSP_ITIP(r) (r + 0x084)
+#define SSP_ITOP(r) (r + 0x088)
+#define SSP_TDR(r) (r + 0x08C)
+
+#define SSP_PID0(r) (r + 0xFE0)
+#define SSP_PID1(r) (r + 0xFE4)
+#define SSP_PID2(r) (r + 0xFE8)
+#define SSP_PID3(r) (r + 0xFEC)
+
+#define SSP_CID0(r) (r + 0xFF0)
+#define SSP_CID1(r) (r + 0xFF4)
+#define SSP_CID2(r) (r + 0xFF8)
+#define SSP_CID3(r) (r + 0xFFC)
+
+/*
+ * SSP Control Register 0 - SSP_CR0
+ */
+#define SSP_CR0_MASK_DSS (0x1FUL << 0)
+#define SSP_CR0_MASK_HALFDUP (0x1UL << 5)
+#define SSP_CR0_MASK_SPO (0x1UL << 6)
+#define SSP_CR0_MASK_SPH (0x1UL << 7)
+#define SSP_CR0_MASK_SCR (0xFFUL << 8)
+#define SSP_CR0_MASK_CSS (0x1FUL << 16)
+#define SSP_CR0_MASK_FRF (0x3UL << 21)
+
+/*
+ * SSP Control Register 0 - SSP_CR1
+ */
+#define SSP_CR1_MASK_LBM (0x1UL << 0)
+#define SSP_CR1_MASK_SSE (0x1UL << 1)
+#define SSP_CR1_MASK_MS (0x1UL << 2)
+#define SSP_CR1_MASK_SOD (0x1UL << 3)
+#define SSP_CR1_MASK_RENDN (0x1UL << 4)
+#define SSP_CR1_MASK_TENDN (0x1UL << 5)
+#define SSP_CR1_MASK_MWAIT (0x1UL << 6)
+#define SSP_CR1_MASK_RXIFLSEL (0x7UL << 7)
+#define SSP_CR1_MASK_TXIFLSEL (0x7UL << 10)
+
+/*
+ * SSP Data Register - SSP_DR
+ */
+#define SSP_DR_MASK_DATA 0xFFFFFFFF
+
+/*
+ * SSP Status Register - SSP_SR
+ */
+#define SSP_SR_MASK_TFE (0x1UL << 0) /* Transmit FIFO empty */
+#define SSP_SR_MASK_TNF (0x1UL << 1) /* Transmit FIFO not full */
+#define SSP_SR_MASK_RNE (0x1UL << 2) /* Receive FIFO not empty */
+#define SSP_SR_MASK_RFF (0x1UL << 3) /* Receive FIFO full */
+#define SSP_SR_MASK_BSY (0x1UL << 4) /* Busy Flag */
+
+/*
+ * SSP Clock Prescale Register - SSP_CPSR
+ */
+#define SSP_CPSR_MASK_CPSDVSR (0xFFUL << 0)
+
+/*
+ * SSP Interrupt Mask Set/Clear Register - SSP_IMSC
+ */
+#define SSP_IMSC_MASK_RORIM (0x1UL << 0) /* Receive Overrun Interrupt mask */
+#define SSP_IMSC_MASK_RTIM (0x1UL << 1) /* Receive timeout Interrupt mask */
+#define SSP_IMSC_MASK_RXIM (0x1UL << 2) /* Receive FIFO Interrupt mask */
+#define SSP_IMSC_MASK_TXIM (0x1UL << 3) /* Transmit FIFO Interrupt mask */
+
+/*
+ * SSP Raw Interrupt Status Register - SSP_RIS
+ */
+/* Receive Overrun Raw Interrupt status */
+#define SSP_RIS_MASK_RORRIS (0x1UL << 0)
+/* Receive Timeout Raw Interrupt status */
+#define SSP_RIS_MASK_RTRIS (0x1UL << 1)
+/* Receive FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_RXRIS (0x1UL << 2)
+/* Transmit FIFO Raw Interrupt status */
+#define SSP_RIS_MASK_TXRIS (0x1UL << 3)
+
+/*
+ * SSP Masked Interrupt Status Register - SSP_MIS
+ */
+/* Receive Overrun Masked Interrupt status */
+#define SSP_MIS_MASK_RORMIS (0x1UL << 0)
+/* Receive Timeout Masked Interrupt status */
+#define SSP_MIS_MASK_RTMIS (0x1UL << 1)
+/* Receive FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_RXMIS (0x1UL << 2)
+/* Transmit FIFO Masked Interrupt status */
+#define SSP_MIS_MASK_TXMIS (0x1UL << 3)
+
+/*
+ * SSP Interrupt Clear Register - SSP_ICR
+ */
+/* Receive Overrun Raw Clear Interrupt bit */
+#define SSP_ICR_MASK_RORIC (0x1UL << 0)
+/* Receive Timeout Clear Interrupt bit */
+#define SSP_ICR_MASK_RTIC (0x1UL << 1)
+
+/*
+ * SSP DMA Control Register - SSP_DMACR
+ */
+/* Receive DMA Enable bit */
+#define SSP_DMACR_MASK_RXDMAE (0x1UL << 0)
+/* Transmit DMA Enable bit */
+#define SSP_DMACR_MASK_TXDMAE (0x1UL << 1)
+
+/*
+ * SSP Integration Test control Register - SSP_ITCR
+ */
+#define SSP_ITCR_MASK_ITEN (0x1UL << 0)
+#define SSP_ITCR_MASK_TESTFIFO (0x1UL << 1)
+
+/*
+ * SSP Integration Test Input Register - SSP_ITIP
+ */
+#define ITIP_MASK_SSPRXD (0x1UL << 0)
+#define ITIP_MASK_SSPFSSIN (0x1UL << 1)
+#define ITIP_MASK_SSPCLKIN (0x1UL << 2)
+#define ITIP_MASK_RXDMAC (0x1UL << 3)
+#define ITIP_MASK_TXDMAC (0x1UL << 4)
+#define ITIP_MASK_SSPTXDIN (0x1UL << 5)
+
+/*
+ * SSP Integration Test output Register - SSP_ITOP
+ */
+#define ITOP_MASK_SSPTXD (0x1UL << 0)
+#define ITOP_MASK_SSPFSSOUT (0x1UL << 1)
+#define ITOP_MASK_SSPCLKOUT (0x1UL << 2)
+#define ITOP_MASK_SSPOEn (0x1UL << 3)
+#define ITOP_MASK_SSPCTLOEn (0x1UL << 4)
+#define ITOP_MASK_RORINTR (0x1UL << 5)
+#define ITOP_MASK_RTINTR (0x1UL << 6)
+#define ITOP_MASK_RXINTR (0x1UL << 7)
+#define ITOP_MASK_TXINTR (0x1UL << 8)
+#define ITOP_MASK_INTR (0x1UL << 9)
+#define ITOP_MASK_RXDMABREQ (0x1UL << 10)
+#define ITOP_MASK_RXDMASREQ (0x1UL << 11)
+#define ITOP_MASK_TXDMABREQ (0x1UL << 12)
+#define ITOP_MASK_TXDMASREQ (0x1UL << 13)
+
+/*
+ * SSP Test Data Register - SSP_TDR
+ */
+#define TDR_MASK_TESTDATA (0xFFFFFFFF)
+
+/*
+ * Message State
+ * we use the spi_message.state (void *) pointer to
+ * hold a single state value, that's why all this
+ * (void *) casting is done here.
+ */
+#define STATE_START ((void *) 0)
+#define STATE_RUNNING ((void *) 1)
+#define STATE_DONE ((void *) 2)
+#define STATE_ERROR ((void *) -1)
+
+/*
+ * Queue State
+ */
+#define QUEUE_RUNNING (0)
+#define QUEUE_STOPPED (1)
+/*
+ * SSP State - Whether Enabled or Disabled
+ */
+#define SSP_DISABLED (0)
+#define SSP_ENABLED (1)
+
+/*
+ * SSP DMA State - Whether DMA Enabled or Disabled
+ */
+#define SSP_DMA_DISABLED (0)
+#define SSP_DMA_ENABLED (1)
+
+/*
+ * SSP Clock Defaults
+ */
+#define NMDK_SSP_DEFAULT_CLKRATE 0x2
+#define NMDK_SSP_DEFAULT_PRESCALE 0x40
+
+/*
+ * SSP Clock Parameter ranges
+ */
+#define CPSDVR_MIN 0x02
+#define CPSDVR_MAX 0xFE
+#define SCR_MIN 0x00
+#define SCR_MAX 0xFF
+
+/*
+ * SSP Interrupt related Macros
+ */
+#define DEFAULT_SSP_REG_IMSC 0x0UL
+#define DISABLE_ALL_INTERRUPTS DEFAULT_SSP_REG_IMSC
+#define ENABLE_ALL_INTERRUPTS (~DEFAULT_SSP_REG_IMSC)
+
+#define CLEAR_ALL_INTERRUPTS 0x3
+
+
+/*
+ * The type of reading going on on this chip
+ */
+enum ssp_reading {
+ READING_NULL,
+ READING_U8,
+ READING_U16,
+ READING_U32
+};
+
+/**
+ * The type of writing going on on this chip
+ */
+enum ssp_writing {
+ WRITING_NULL,
+ WRITING_U8,
+ WRITING_U16,
+ WRITING_U32
+};
+
+/**
+ * struct vendor_data - vendor-specific config parameters
+ * for PL022 derivates
+ * @fifodepth: depth of FIFOs (both)
+ * @max_bpw: maximum number of bits per word
+ * @unidir: supports unidirection transfers
+ */
+struct vendor_data {
+ int fifodepth;
+ int max_bpw;
+ bool unidir;
+};
+
+/**
+ * struct pl022 - This is the private SSP driver data structure
+ * @adev: AMBA device model hookup
+ * @phybase: The physical memory where the SSP device resides
+ * @virtbase: The virtual memory where the SSP is mapped
+ * @master: SPI framework hookup
+ * @master_info: controller-specific data from machine setup
+ * @regs: SSP controller register's virtual address
+ * @pump_messages: Work struct for scheduling work to the workqueue
+ * @lock: spinlock to syncronise access to driver data
+ * @workqueue: a workqueue on which any spi_message request is queued
+ * @busy: workqueue is busy
+ * @run: workqueue is running
+ * @pump_transfers: Tasklet used in Interrupt Transfer mode
+ * @cur_msg: Pointer to current spi_message being processed
+ * @cur_transfer: Pointer to current spi_transfer
+ * @cur_chip: pointer to current clients chip(assigned from controller_state)
+ * @tx: current position in TX buffer to be read
+ * @tx_end: end position in TX buffer to be read
+ * @rx: current position in RX buffer to be written
+ * @rx_end: end position in RX buffer to be written
+ * @readingtype: the type of read currently going on
+ * @writingtype: the type or write currently going on
+ */
+struct pl022 {
+ struct amba_device *adev;
+ struct vendor_data *vendor;
+ resource_size_t phybase;
+ void __iomem *virtbase;
+ struct clk *clk;
+ struct spi_master *master;
+ struct pl022_ssp_controller *master_info;
+ /* Driver message queue */
+ struct workqueue_struct *workqueue;
+ struct work_struct pump_messages;
+ spinlock_t queue_lock;
+ struct list_head queue;
+ int busy;
+ int run;
+ /* Message transfer pump */
+ struct tasklet_struct pump_transfers;
+ struct spi_message *cur_msg;
+ struct spi_transfer *cur_transfer;
+ struct chip_data *cur_chip;
+ void *tx;
+ void *tx_end;
+ void *rx;
+ void *rx_end;
+ enum ssp_reading read;
+ enum ssp_writing write;
+};
+
+/**
+ * struct chip_data - To maintain runtime state of SSP for each client chip
+ * @cr0: Value of control register CR0 of SSP
+ * @cr1: Value of control register CR1 of SSP
+ * @dmacr: Value of DMA control Register of SSP
+ * @cpsr: Value of Clock prescale register
+ * @n_bytes: how many bytes(power of 2) reqd for a given data width of client
+ * @enable_dma: Whether to enable DMA or not
+ * @write: function ptr to be used to write when doing xfer for this chip
+ * @read: function ptr to be used to read when doing xfer for this chip
+ * @cs_control: chip select callback provided by chip
+ * @xfer_type: polling/interrupt/DMA
+ *
+ * Runtime state of the SSP controller, maintained per chip,
+ * This would be set according to the current message that would be served
+ */
+struct chip_data {
+ u16 cr0;
+ u16 cr1;
+ u16 dmacr;
+ u16 cpsr;
+ u8 n_bytes;
+ u8 enable_dma:1;
+ enum ssp_reading read;
+ enum ssp_writing write;
+ void (*cs_control) (u32 command);
+ int xfer_type;
+};
+
+/**
+ * null_cs_control - Dummy chip select function
+ * @command: select/delect the chip
+ *
+ * If no chip select function is provided by client this is used as dummy
+ * chip select
+ */
+static void null_cs_control(u32 command)
+{
+ pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
+}
+
+/**
+ * giveback - current spi_message is over, schedule next message and call
+ * callback of this message. Assumes that caller already
+ * set message->status; dma and pio irqs are blocked
+ * @pl022: SSP driver private data structure
+ */
+static void giveback(struct pl022 *pl022)
+{
+ struct spi_transfer *last_transfer;
+ unsigned long flags;
+ struct spi_message *msg;
+ void (*curr_cs_control) (u32 command);
+
+ /*
+ * This local reference to the chip select function
+ * is needed because we set curr_chip to NULL
+ * as a step toward termininating the message.
+ */
+ curr_cs_control = pl022->cur_chip->cs_control;
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+ msg = pl022->cur_msg;
+ pl022->cur_msg = NULL;
+ pl022->cur_transfer = NULL;
+ pl022->cur_chip = NULL;
+ queue_work(pl022->workqueue, &pl022->pump_messages);
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ last_transfer = list_entry(msg->transfers.prev,
+ struct spi_transfer,
+ transfer_list);
+
+ /* Delay if requested before any change in chip select */
+ if (last_transfer->delay_usecs)
+ /*
+ * FIXME: This runs in interrupt context.
+ * Is this really smart?
+ */
+ udelay(last_transfer->delay_usecs);
+
+ /*
+ * Drop chip select UNLESS cs_change is true or we are returning
+ * a message with an error, or next message is for another chip
+ */
+ if (!last_transfer->cs_change)
+ curr_cs_control(SSP_CHIP_DESELECT);
+ else {
+ struct spi_message *next_msg;
+
+ /* Holding of cs was hinted, but we need to make sure
+ * the next message is for the same chip. Don't waste
+ * time with the following tests unless this was hinted.
+ *
+ * We cannot postpone this until pump_messages, because
+ * after calling msg->complete (below) the driver that
+ * sent the current message could be unloaded, which
+ * could invalidate the cs_control() callback...
+ */
+
+ /* get a pointer to the next message, if any */
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+ if (list_empty(&pl022->queue))
+ next_msg = NULL;
+ else
+ next_msg = list_entry(pl022->queue.next,
+ struct spi_message, queue);
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ /* see if the next and current messages point
+ * to the same chip
+ */
+ if (next_msg && next_msg->spi != msg->spi)
+ next_msg = NULL;
+ if (!next_msg || msg->state == STATE_ERROR)
+ curr_cs_control(SSP_CHIP_DESELECT);
+ }
+ msg->state = NULL;
+ if (msg->complete)
+ msg->complete(msg->context);
+ /* This message is completed, so let's turn off the clock! */
+ clk_disable(pl022->clk);
+}
+
+/**
+ * flush - flush the FIFO to reach a clean state
+ * @pl022: SSP driver private data structure
+ */
+static int flush(struct pl022 *pl022)
+{
+ unsigned long limit = loops_per_jiffy << 1;
+
+ dev_dbg(&pl022->adev->dev, "flush\n");
+ do {
+ while (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+ readw(SSP_DR(pl022->virtbase));
+ } while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_BSY) && limit--);
+ return limit;
+}
+
+/**
+ * restore_state - Load configuration of current chip
+ * @pl022: SSP driver private data structure
+ */
+static void restore_state(struct pl022 *pl022)
+{
+ struct chip_data *chip = pl022->cur_chip;
+
+ writew(chip->cr0, SSP_CR0(pl022->virtbase));
+ writew(chip->cr1, SSP_CR1(pl022->virtbase));
+ writew(chip->dmacr, SSP_DMACR(pl022->virtbase));
+ writew(chip->cpsr, SSP_CPSR(pl022->virtbase));
+ writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+ writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * load_ssp_default_config - Load default configuration for SSP
+ * @pl022: SSP driver private data structure
+ */
+
+/*
+ * Default SSP Register Values
+ */
+#define DEFAULT_SSP_REG_CR0 ( \
+ GEN_MASK_BITS(SSP_DATA_BITS_12, SSP_CR0_MASK_DSS, 0) | \
+ GEN_MASK_BITS(SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, SSP_CR0_MASK_HALFDUP, 5) | \
+ GEN_MASK_BITS(SSP_CLK_POL_IDLE_LOW, SSP_CR0_MASK_SPO, 6) | \
+ GEN_MASK_BITS(SSP_CLK_FALLING_EDGE, SSP_CR0_MASK_SPH, 7) | \
+ GEN_MASK_BITS(NMDK_SSP_DEFAULT_CLKRATE, SSP_CR0_MASK_SCR, 8) | \
+ GEN_MASK_BITS(SSP_BITS_8, SSP_CR0_MASK_CSS, 16) | \
+ GEN_MASK_BITS(SSP_INTERFACE_MOTOROLA_SPI, SSP_CR0_MASK_FRF, 21) \
+)
+
+#define DEFAULT_SSP_REG_CR1 ( \
+ GEN_MASK_BITS(LOOPBACK_DISABLED, SSP_CR1_MASK_LBM, 0) | \
+ GEN_MASK_BITS(SSP_DISABLED, SSP_CR1_MASK_SSE, 1) | \
+ GEN_MASK_BITS(SSP_MASTER, SSP_CR1_MASK_MS, 2) | \
+ GEN_MASK_BITS(DO_NOT_DRIVE_TX, SSP_CR1_MASK_SOD, 3) | \
+ GEN_MASK_BITS(SSP_RX_MSB, SSP_CR1_MASK_RENDN, 4) | \
+ GEN_MASK_BITS(SSP_TX_MSB, SSP_CR1_MASK_TENDN, 5) | \
+ GEN_MASK_BITS(SSP_MWIRE_WAIT_ZERO, SSP_CR1_MASK_MWAIT, 6) |\
+ GEN_MASK_BITS(SSP_RX_1_OR_MORE_ELEM, SSP_CR1_MASK_RXIFLSEL, 7) | \
+ GEN_MASK_BITS(SSP_TX_1_OR_MORE_EMPTY_LOC, SSP_CR1_MASK_TXIFLSEL, 10) \
+)
+
+#define DEFAULT_SSP_REG_CPSR ( \
+ GEN_MASK_BITS(NMDK_SSP_DEFAULT_PRESCALE, SSP_CPSR_MASK_CPSDVSR, 0) \
+)
+
+#define DEFAULT_SSP_REG_DMACR (\
+ GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0) | \
+ GEN_MASK_BITS(SSP_DMA_DISABLED, SSP_DMACR_MASK_TXDMAE, 1) \
+)
+
+
+static void load_ssp_default_config(struct pl022 *pl022)
+{
+ writew(DEFAULT_SSP_REG_CR0, SSP_CR0(pl022->virtbase));
+ writew(DEFAULT_SSP_REG_CR1, SSP_CR1(pl022->virtbase));
+ writew(DEFAULT_SSP_REG_DMACR, SSP_DMACR(pl022->virtbase));
+ writew(DEFAULT_SSP_REG_CPSR, SSP_CPSR(pl022->virtbase));
+ writew(DISABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+ writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+}
+
+/**
+ * This will write to TX and read from RX according to the parameters
+ * set in pl022.
+ */
+static void readwriter(struct pl022 *pl022)
+{
+
+ /*
+ * The FIFO depth is different inbetween primecell variants.
+ * I believe filling in too much in the FIFO might cause
+ * errons in 8bit wide transfers on ARM variants (just 8 words
+ * FIFO, means only 8x8 = 64 bits in FIFO) at least.
+ *
+ * FIXME: currently we have no logic to account for this.
+ * perhaps there is even something broken in HW regarding
+ * 8bit transfers (it doesn't fail on 16bit) so this needs
+ * more investigation...
+ */
+ dev_dbg(&pl022->adev->dev,
+ "%s, rx: %p, rxend: %p, tx: %p, txend: %p\n",
+ __func__, pl022->rx, pl022->rx_end, pl022->tx, pl022->tx_end);
+
+ /* Read as much as you can */
+ while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+ && (pl022->rx < pl022->rx_end)) {
+ switch (pl022->read) {
+ case READING_NULL:
+ readw(SSP_DR(pl022->virtbase));
+ break;
+ case READING_U8:
+ *(u8 *) (pl022->rx) =
+ readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+ break;
+ case READING_U16:
+ *(u16 *) (pl022->rx) =
+ (u16) readw(SSP_DR(pl022->virtbase));
+ break;
+ case READING_U32:
+ *(u32 *) (pl022->rx) =
+ readl(SSP_DR(pl022->virtbase));
+ break;
+ }
+ pl022->rx += (pl022->cur_chip->n_bytes);
+ }
+ /*
+ * Write as much as you can, while keeping an eye on the RX FIFO!
+ */
+ while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+ && (pl022->tx < pl022->tx_end)) {
+ switch (pl022->write) {
+ case WRITING_NULL:
+ writew(0x0, SSP_DR(pl022->virtbase));
+ break;
+ case WRITING_U8:
+ writew(*(u8 *) (pl022->tx), SSP_DR(pl022->virtbase));
+ break;
+ case WRITING_U16:
+ writew((*(u16 *) (pl022->tx)), SSP_DR(pl022->virtbase));
+ break;
+ case WRITING_U32:
+ writel(*(u32 *) (pl022->tx), SSP_DR(pl022->virtbase));
+ break;
+ }
+ pl022->tx += (pl022->cur_chip->n_bytes);
+ /*
+ * This inner reader takes care of things appearing in the RX
+ * FIFO as we're transmitting. This will happen a lot since the
+ * clock starts running when you put things into the TX FIFO,
+ * and then things are continously clocked into the RX FIFO.
+ */
+ while ((readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RNE)
+ && (pl022->rx < pl022->rx_end)) {
+ switch (pl022->read) {
+ case READING_NULL:
+ readw(SSP_DR(pl022->virtbase));
+ break;
+ case READING_U8:
+ *(u8 *) (pl022->rx) =
+ readw(SSP_DR(pl022->virtbase)) & 0xFFU;
+ break;
+ case READING_U16:
+ *(u16 *) (pl022->rx) =
+ (u16) readw(SSP_DR(pl022->virtbase));
+ break;
+ case READING_U32:
+ *(u32 *) (pl022->rx) =
+ readl(SSP_DR(pl022->virtbase));
+ break;
+ }
+ pl022->rx += (pl022->cur_chip->n_bytes);
+ }
+ }
+ /*
+ * When we exit here the TX FIFO should be full and the RX FIFO
+ * should be empty
+ */
+}
+
+
+/**
+ * next_transfer - Move to the Next transfer in the current spi message
+ * @pl022: SSP driver private data structure
+ *
+ * This function moves though the linked list of spi transfers in the
+ * current spi message and returns with the state of current spi
+ * message i.e whether its last transfer is done(STATE_DONE) or
+ * Next transfer is ready(STATE_RUNNING)
+ */
+static void *next_transfer(struct pl022 *pl022)
+{
+ struct spi_message *msg = pl022->cur_msg;
+ struct spi_transfer *trans = pl022->cur_transfer;
+
+ /* Move to next transfer */
+ if (trans->transfer_list.next != &msg->transfers) {
+ pl022->cur_transfer =
+ list_entry(trans->transfer_list.next,
+ struct spi_transfer, transfer_list);
+ return STATE_RUNNING;
+ }
+ return STATE_DONE;
+}
+/**
+ * pl022_interrupt_handler - Interrupt handler for SSP controller
+ *
+ * This function handles interrupts generated for an interrupt based transfer.
+ * If a receive overrun (ROR) interrupt is there then we disable SSP, flag the
+ * current message's state as STATE_ERROR and schedule the tasklet
+ * pump_transfers which will do the postprocessing of the current message by
+ * calling giveback(). Otherwise it reads data from RX FIFO till there is no
+ * more data, and writes data in TX FIFO till it is not full. If we complete
+ * the transfer we move to the next transfer and schedule the tasklet.
+ */
+static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id)
+{
+ struct pl022 *pl022 = dev_id;
+ struct spi_message *msg = pl022->cur_msg;
+ u16 irq_status = 0;
+ u16 flag = 0;
+
+ if (unlikely(!msg)) {
+ dev_err(&pl022->adev->dev,
+ "bad message state in interrupt handler");
+ /* Never fail */
+ return IRQ_HANDLED;
+ }
+
+ /* Read the Interrupt Status Register */
+ irq_status = readw(SSP_MIS(pl022->virtbase));
+
+ if (unlikely(!irq_status))
+ return IRQ_NONE;
+
+ /* This handles the error code interrupts */
+ if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) {
+ /*
+ * Overrun interrupt - bail out since our Data has been
+ * corrupted
+ */
+ dev_err(&pl022->adev->dev,
+ "FIFO overrun\n");
+ if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF)
+ dev_err(&pl022->adev->dev,
+ "RXFIFO is full\n");
+ if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_TNF)
+ dev_err(&pl022->adev->dev,
+ "TXFIFO is full\n");
+
+ /*
+ * Disable and clear interrupts, disable SSP,
+ * mark message with bad status so it can be
+ * retried.
+ */
+ writew(DISABLE_ALL_INTERRUPTS,
+ SSP_IMSC(pl022->virtbase));
+ writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+ writew((readw(SSP_CR1(pl022->virtbase)) &
+ (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase));
+ msg->state = STATE_ERROR;
+
+ /* Schedule message queue handler */
+ tasklet_schedule(&pl022->pump_transfers);
+ return IRQ_HANDLED;
+ }
+
+ readwriter(pl022);
+
+ if ((pl022->tx == pl022->tx_end) && (flag == 0)) {
+ flag = 1;
+ /* Disable Transmit interrupt */
+ writew(readw(SSP_IMSC(pl022->virtbase)) &
+ (~SSP_IMSC_MASK_TXIM),
+ SSP_IMSC(pl022->virtbase));
+ }
+
+ /*
+ * Since all transactions must write as much as shall be read,
+ * we can conclude the entire transaction once RX is complete.
+ * At this point, all TX will always be finished.
+ */
+ if (pl022->rx >= pl022->rx_end) {
+ writew(DISABLE_ALL_INTERRUPTS,
+ SSP_IMSC(pl022->virtbase));
+ writew(CLEAR_ALL_INTERRUPTS, SSP_ICR(pl022->virtbase));
+ if (unlikely(pl022->rx > pl022->rx_end)) {
+ dev_warn(&pl022->adev->dev, "read %u surplus "
+ "bytes (did you request an odd "
+ "number of bytes on a 16bit bus?)\n",
+ (u32) (pl022->rx - pl022->rx_end));
+ }
+ /* Update total bytes transfered */
+ msg->actual_length += pl022->cur_transfer->len;
+ if (pl022->cur_transfer->cs_change)
+ pl022->cur_chip->
+ cs_control(SSP_CHIP_DESELECT);
+ /* Move to next transfer */
+ msg->state = next_transfer(pl022);
+ tasklet_schedule(&pl022->pump_transfers);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * This sets up the pointers to memory for the next message to
+ * send out on the SPI bus.
+ */
+static int set_up_next_transfer(struct pl022 *pl022,
+ struct spi_transfer *transfer)
+{
+ int residue;
+
+ /* Sanity check the message for this bus width */
+ residue = pl022->cur_transfer->len % pl022->cur_chip->n_bytes;
+ if (unlikely(residue != 0)) {
+ dev_err(&pl022->adev->dev,
+ "message of %u bytes to transmit but the current "
+ "chip bus has a data width of %u bytes!\n",
+ pl022->cur_transfer->len,
+ pl022->cur_chip->n_bytes);
+ dev_err(&pl022->adev->dev, "skipping this message\n");
+ return -EIO;
+ }
+ pl022->tx = (void *)transfer->tx_buf;
+ pl022->tx_end = pl022->tx + pl022->cur_transfer->len;
+ pl022->rx = (void *)transfer->rx_buf;
+ pl022->rx_end = pl022->rx + pl022->cur_transfer->len;
+ pl022->write =
+ pl022->tx ? pl022->cur_chip->write : WRITING_NULL;
+ pl022->read = pl022->rx ? pl022->cur_chip->read : READING_NULL;
+ return 0;
+}
+
+/**
+ * pump_transfers - Tasklet function which schedules next interrupt transfer
+ * when running in interrupt transfer mode.
+ * @data: SSP driver private data structure
+ *
+ */
+static void pump_transfers(unsigned long data)
+{
+ struct pl022 *pl022 = (struct pl022 *) data;
+ struct spi_message *message = NULL;
+ struct spi_transfer *transfer = NULL;
+ struct spi_transfer *previous = NULL;
+
+ /* Get current state information */
+ message = pl022->cur_msg;
+ transfer = pl022->cur_transfer;
+
+ /* Handle for abort */
+ if (message->state == STATE_ERROR) {
+ message->status = -EIO;
+ giveback(pl022);
+ return;
+ }
+
+ /* Handle end of message */
+ if (message->state == STATE_DONE) {
+ message->status = 0;
+ giveback(pl022);
+ return;
+ }
+
+ /* Delay if requested at end of transfer before CS change */
+ if (message->state == STATE_RUNNING) {
+ previous = list_entry(transfer->transfer_list.prev,
+ struct spi_transfer,
+ transfer_list);
+ if (previous->delay_usecs)
+ /*
+ * FIXME: This runs in interrupt context.
+ * Is this really smart?
+ */
+ udelay(previous->delay_usecs);
+
+ /* Drop chip select only if cs_change is requested */
+ if (previous->cs_change)
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ } else {
+ /* STATE_START */
+ message->state = STATE_RUNNING;
+ }
+
+ if (set_up_next_transfer(pl022, transfer)) {
+ message->state = STATE_ERROR;
+ message->status = -EIO;
+ giveback(pl022);
+ return;
+ }
+ /* Flush the FIFOs and let's go! */
+ flush(pl022);
+ writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+/**
+ * NOT IMPLEMENTED
+ * configure_dma - It configures the DMA pipes for DMA transfers
+ * @data: SSP driver's private data structure
+ *
+ */
+static int configure_dma(void *data)
+{
+ struct pl022 *pl022 = data;
+ dev_dbg(&pl022->adev->dev, "configure DMA\n");
+ return -ENOTSUPP;
+}
+
+/**
+ * do_dma_transfer - It handles transfers of the current message
+ * if it is DMA xfer.
+ * NOT FULLY IMPLEMENTED
+ * @data: SSP driver's private data structure
+ */
+static void do_dma_transfer(void *data)
+{
+ struct pl022 *pl022 = data;
+
+ if (configure_dma(data)) {
+ dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n");
+ goto err_config_dma;
+ }
+
+ /* TODO: Implememt DMA setup of pipes here */
+
+ /* Enable target chip, set up transfer */
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+ /* Error path */
+ pl022->cur_msg->state = STATE_ERROR;
+ pl022->cur_msg->status = -EIO;
+ giveback(pl022);
+ return;
+ }
+ /* Enable SSP */
+ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+ SSP_CR1(pl022->virtbase));
+
+ /* TODO: Enable the DMA transfer here */
+ return;
+
+ err_config_dma:
+ pl022->cur_msg->state = STATE_ERROR;
+ pl022->cur_msg->status = -EIO;
+ giveback(pl022);
+ return;
+}
+
+static void do_interrupt_transfer(void *data)
+{
+ struct pl022 *pl022 = data;
+
+ /* Enable target chip */
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ if (set_up_next_transfer(pl022, pl022->cur_transfer)) {
+ /* Error path */
+ pl022->cur_msg->state = STATE_ERROR;
+ pl022->cur_msg->status = -EIO;
+ giveback(pl022);
+ return;
+ }
+ /* Enable SSP, turn on interrupts */
+ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+ SSP_CR1(pl022->virtbase));
+ writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase));
+}
+
+static void do_polling_transfer(void *data)
+{
+ struct pl022 *pl022 = data;
+ struct spi_message *message = NULL;
+ struct spi_transfer *transfer = NULL;
+ struct spi_transfer *previous = NULL;
+ struct chip_data *chip;
+
+ chip = pl022->cur_chip;
+ message = pl022->cur_msg;
+
+ while (message->state != STATE_DONE) {
+ /* Handle for abort */
+ if (message->state == STATE_ERROR)
+ break;
+ transfer = pl022->cur_transfer;
+
+ /* Delay if requested at end of transfer */
+ if (message->state == STATE_RUNNING) {
+ previous =
+ list_entry(transfer->transfer_list.prev,
+ struct spi_transfer, transfer_list);
+ if (previous->delay_usecs)
+ udelay(previous->delay_usecs);
+ if (previous->cs_change)
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ } else {
+ /* STATE_START */
+ message->state = STATE_RUNNING;
+ pl022->cur_chip->cs_control(SSP_CHIP_SELECT);
+ }
+
+ /* Configuration Changing Per Transfer */
+ if (set_up_next_transfer(pl022, transfer)) {
+ /* Error path */
+ message->state = STATE_ERROR;
+ break;
+ }
+ /* Flush FIFOs and enable SSP */
+ flush(pl022);
+ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE),
+ SSP_CR1(pl022->virtbase));
+
+ dev_dbg(&pl022->adev->dev, "POLLING TRANSFER ONGOING ... \n");
+ /* FIXME: insert a timeout so we don't hang here indefinately */
+ while (pl022->tx < pl022->tx_end || pl022->rx < pl022->rx_end)
+ readwriter(pl022);
+
+ /* Update total byte transfered */
+ message->actual_length += pl022->cur_transfer->len;
+ if (pl022->cur_transfer->cs_change)
+ pl022->cur_chip->cs_control(SSP_CHIP_DESELECT);
+ /* Move to next transfer */
+ message->state = next_transfer(pl022);
+ }
+
+ /* Handle end of message */
+ if (message->state == STATE_DONE)
+ message->status = 0;
+ else
+ message->status = -EIO;
+
+ giveback(pl022);
+ return;
+}
+
+/**
+ * pump_messages - Workqueue function which processes spi message queue
+ * @data: pointer to private data of SSP driver
+ *
+ * This function checks if there is any spi message in the queue that
+ * needs processing and delegate control to appropriate function
+ * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer()
+ * based on the kind of the transfer
+ *
+ */
+static void pump_messages(struct work_struct *work)
+{
+ struct pl022 *pl022 =
+ container_of(work, struct pl022, pump_messages);
+ unsigned long flags;
+
+ /* Lock queue and check for queue work */
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+ if (list_empty(&pl022->queue) || pl022->run == QUEUE_STOPPED) {
+ pl022->busy = 0;
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return;
+ }
+ /* Make sure we are not already running a message */
+ if (pl022->cur_msg) {
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return;
+ }
+ /* Extract head of queue */
+ pl022->cur_msg =
+ list_entry(pl022->queue.next, struct spi_message, queue);
+
+ list_del_init(&pl022->cur_msg->queue);
+ pl022->busy = 1;
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ /* Initial message state */
+ pl022->cur_msg->state = STATE_START;
+ pl022->cur_transfer = list_entry(pl022->cur_msg->transfers.next,
+ struct spi_transfer,
+ transfer_list);
+
+ /* Setup the SPI using the per chip configuration */
+ pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
+ /*
+ * We enable the clock here, then the clock will be disabled when
+ * giveback() is called in each method (poll/interrupt/DMA)
+ */
+ clk_enable(pl022->clk);
+ restore_state(pl022);
+ flush(pl022);
+
+ if (pl022->cur_chip->xfer_type == POLLING_TRANSFER)
+ do_polling_transfer(pl022);
+ else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER)
+ do_interrupt_transfer(pl022);
+ else
+ do_dma_transfer(pl022);
+}
+
+
+static int __init init_queue(struct pl022 *pl022)
+{
+ INIT_LIST_HEAD(&pl022->queue);
+ spin_lock_init(&pl022->queue_lock);
+
+ pl022->run = QUEUE_STOPPED;
+ pl022->busy = 0;
+
+ tasklet_init(&pl022->pump_transfers,
+ pump_transfers, (unsigned long)pl022);
+
+ INIT_WORK(&pl022->pump_messages, pump_messages);
+ pl022->workqueue = create_singlethread_workqueue(
+ dev_name(pl022->master->dev.parent));
+ if (pl022->workqueue == NULL)
+ return -EBUSY;
+
+ return 0;
+}
+
+
+static int start_queue(struct pl022 *pl022)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+
+ if (pl022->run == QUEUE_RUNNING || pl022->busy) {
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return -EBUSY;
+ }
+
+ pl022->run = QUEUE_RUNNING;
+ pl022->cur_msg = NULL;
+ pl022->cur_transfer = NULL;
+ pl022->cur_chip = NULL;
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ queue_work(pl022->workqueue, &pl022->pump_messages);
+
+ return 0;
+}
+
+
+static int stop_queue(struct pl022 *pl022)
+{
+ unsigned long flags;
+ unsigned limit = 500;
+ int status = 0;
+
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+
+ /* This is a bit lame, but is optimized for the common execution path.
+ * A wait_queue on the pl022->busy could be used, but then the common
+ * execution path (pump_messages) would be required to call wake_up or
+ * friends on every SPI message. Do this instead */
+ pl022->run = QUEUE_STOPPED;
+ while (!list_empty(&pl022->queue) && pl022->busy && limit--) {
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ msleep(10);
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+ }
+
+ if (!list_empty(&pl022->queue) || pl022->busy)
+ status = -EBUSY;
+
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+
+ return status;
+}
+
+static int destroy_queue(struct pl022 *pl022)
+{
+ int status;
+
+ status = stop_queue(pl022);
+ /* we are unloading the module or failing to load (only two calls
+ * to this routine), and neither call can handle a return value.
+ * However, destroy_workqueue calls flush_workqueue, and that will
+ * block until all work is done. If the reason that stop_queue
+ * timed out is that the work will never finish, then it does no
+ * good to call destroy_workqueue, so return anyway. */
+ if (status != 0)
+ return status;
+
+ destroy_workqueue(pl022->workqueue);
+
+ return 0;
+}
+
+static int verify_controller_parameters(struct pl022 *pl022,
+ struct pl022_config_chip *chip_info)
+{
+ if ((chip_info->lbm != LOOPBACK_ENABLED)
+ && (chip_info->lbm != LOOPBACK_DISABLED)) {
+ dev_err(chip_info->dev,
+ "loopback Mode is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI)
+ || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) {
+ dev_err(chip_info->dev,
+ "interface is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) &&
+ (!pl022->vendor->unidir)) {
+ dev_err(chip_info->dev,
+ "unidirectional mode not supported in this "
+ "hardware version\n");
+ return -EINVAL;
+ }
+ if ((chip_info->hierarchy != SSP_MASTER)
+ && (chip_info->hierarchy != SSP_SLAVE)) {
+ dev_err(chip_info->dev,
+ "hierarchy is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN)
+ || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) {
+ dev_err(chip_info->dev,
+ "cpsdvsr is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->endian_rx != SSP_RX_MSB)
+ && (chip_info->endian_rx != SSP_RX_LSB)) {
+ dev_err(chip_info->dev,
+ "RX FIFO endianess is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->endian_tx != SSP_TX_MSB)
+ && (chip_info->endian_tx != SSP_TX_LSB)) {
+ dev_err(chip_info->dev,
+ "TX FIFO endianess is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->data_size < SSP_DATA_BITS_4)
+ || (chip_info->data_size > SSP_DATA_BITS_32)) {
+ dev_err(chip_info->dev,
+ "DATA Size is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->com_mode != INTERRUPT_TRANSFER)
+ && (chip_info->com_mode != DMA_TRANSFER)
+ && (chip_info->com_mode != POLLING_TRANSFER)) {
+ dev_err(chip_info->dev,
+ "Communication mode is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM)
+ || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) {
+ dev_err(chip_info->dev,
+ "RX FIFO Trigger Level is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC)
+ || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) {
+ dev_err(chip_info->dev,
+ "TX FIFO Trigger Level is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) {
+ if ((chip_info->clk_phase != SSP_CLK_RISING_EDGE)
+ && (chip_info->clk_phase != SSP_CLK_FALLING_EDGE)) {
+ dev_err(chip_info->dev,
+ "Clock Phase is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW)
+ && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) {
+ dev_err(chip_info->dev,
+ "Clock Polarity is configured incorrectly\n");
+ return -EINVAL;
+ }
+ }
+ if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) {
+ if ((chip_info->ctrl_len < SSP_BITS_4)
+ || (chip_info->ctrl_len > SSP_BITS_32)) {
+ dev_err(chip_info->dev,
+ "CTRL LEN is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO)
+ && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) {
+ dev_err(chip_info->dev,
+ "Wait State is configured incorrectly\n");
+ return -EINVAL;
+ }
+ if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX)
+ && (chip_info->duplex !=
+ SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) {
+ dev_err(chip_info->dev,
+ "DUPLEX is configured incorrectly\n");
+ return -EINVAL;
+ }
+ }
+ if (chip_info->cs_control == NULL) {
+ dev_warn(chip_info->dev,
+ "Chip Select Function is NULL for this chip\n");
+ chip_info->cs_control = null_cs_control;
+ }
+ return 0;
+}
+
+/**
+ * pl022_transfer - transfer function registered to SPI master framework
+ * @spi: spi device which is requesting transfer
+ * @msg: spi message which is to handled is queued to driver queue
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will queue the spi_message in the queue of driver if
+ * the queue is not stopped and return.
+ */
+static int pl022_transfer(struct spi_device *spi, struct spi_message *msg)
+{
+ struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ spin_lock_irqsave(&pl022->queue_lock, flags);
+
+ if (pl022->run == QUEUE_STOPPED) {
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return -ESHUTDOWN;
+ }
+ msg->actual_length = 0;
+ msg->status = -EINPROGRESS;
+ msg->state = STATE_START;
+
+ list_add_tail(&msg->queue, &pl022->queue);
+ if (pl022->run == QUEUE_RUNNING && !pl022->busy)
+ queue_work(pl022->workqueue, &pl022->pump_messages);
+
+ spin_unlock_irqrestore(&pl022->queue_lock, flags);
+ return 0;
+}
+
+static int calculate_effective_freq(struct pl022 *pl022,
+ int freq,
+ struct ssp_clock_params *clk_freq)
+{
+ /* Lets calculate the frequency parameters */
+ u16 cpsdvsr = 2;
+ u16 scr = 0;
+ bool freq_found = false;
+ u32 rate;
+ u32 max_tclk;
+ u32 min_tclk;
+
+ rate = clk_get_rate(pl022->clk);
+ /* cpsdvscr = 2 & scr 0 */
+ max_tclk = (rate / (CPSDVR_MIN * (1 + SCR_MIN)));
+ /* cpsdvsr = 254 & scr = 255 */
+ min_tclk = (rate / (CPSDVR_MAX * (1 + SCR_MAX)));
+
+ if ((freq <= max_tclk) && (freq >= min_tclk)) {
+ while (cpsdvsr <= CPSDVR_MAX && !freq_found) {
+ while (scr <= SCR_MAX && !freq_found) {
+ if ((rate /
+ (cpsdvsr * (1 + scr))) > freq)
+ scr += 1;
+ else {
+ /*
+ * This bool is made true when
+ * effective frequency >=
+ * target frequency is found
+ */
+ freq_found = true;
+ if ((rate /
+ (cpsdvsr * (1 + scr))) != freq) {
+ if (scr == SCR_MIN) {
+ cpsdvsr -= 2;
+ scr = SCR_MAX;
+ } else
+ scr -= 1;
+ }
+ }
+ }
+ if (!freq_found) {
+ cpsdvsr += 2;
+ scr = SCR_MIN;
+ }
+ }
+ if (cpsdvsr != 0) {
+ dev_dbg(&pl022->adev->dev,
+ "SSP Effective Frequency is %u\n",
+ (rate / (cpsdvsr * (1 + scr))));
+ clk_freq->cpsdvsr = (u8) (cpsdvsr & 0xFF);
+ clk_freq->scr = (u8) (scr & 0xFF);
+ dev_dbg(&pl022->adev->dev,
+ "SSP cpsdvsr = %d, scr = %d\n",
+ clk_freq->cpsdvsr, clk_freq->scr);
+ }
+ } else {
+ dev_err(&pl022->adev->dev,
+ "controller data is incorrect: out of range frequency");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * NOT IMPLEMENTED
+ * process_dma_info - Processes the DMA info provided by client drivers
+ * @chip_info: chip info provided by client device
+ * @chip: Runtime state maintained by the SSP controller for each spi device
+ *
+ * This function processes and stores DMA config provided by client driver
+ * into the runtime state maintained by the SSP controller driver
+ */
+static int process_dma_info(struct pl022_config_chip *chip_info,
+ struct chip_data *chip)
+{
+ dev_err(chip_info->dev,
+ "cannot process DMA info, DMA not implemented!\n");
+ return -ENOTSUPP;
+}
+
+/**
+ * pl022_setup - setup function registered to SPI master framework
+ * @spi: spi device which is requesting setup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. If it is the first time when setup is called by this device,
+ * this function will initialize the runtime state for this chip and save
+ * the same in the device structure. Else it will update the runtime info
+ * with the updated chip info. Nothing is really being written to the
+ * controller hardware here, that is not done until the actual transfer
+ * commence.
+ */
+
+/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+ | SPI_LSB_FIRST | SPI_LOOP)
+
+static int pl022_setup(struct spi_device *spi)
+{
+ struct pl022_config_chip *chip_info;
+ struct chip_data *chip;
+ int status = 0;
+ struct pl022 *pl022 = spi_master_get_devdata(spi->master);
+
+ if (spi->mode & ~MODEBITS) {
+ dev_dbg(&spi->dev, "unsupported mode bits %x\n",
+ spi->mode & ~MODEBITS);
+ return -EINVAL;
+ }
+
+ if (!spi->max_speed_hz)
+ return -EINVAL;
+
+ /* Get controller_state if one is supplied */
+ chip = spi_get_ctldata(spi);
+
+ if (chip == NULL) {
+ chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
+ if (!chip) {
+ dev_err(&spi->dev,
+ "cannot allocate controller state\n");
+ return -ENOMEM;
+ }
+ dev_dbg(&spi->dev,
+ "allocated memory for controller's runtime state\n");
+ }
+
+ /* Get controller data if one is supplied */
+ chip_info = spi->controller_data;
+
+ if (chip_info == NULL) {
+ /* spi_board_info.controller_data not is supplied */
+ dev_dbg(&spi->dev,
+ "using default controller_data settings\n");
+
+ chip_info =
+ kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL);
+
+ if (!chip_info) {
+ dev_err(&spi->dev,
+ "cannot allocate controller data\n");
+ status = -ENOMEM;
+ goto err_first_setup;
+ }
+
+ dev_dbg(&spi->dev, "allocated memory for controller data\n");
+
+ /* Pointer back to the SPI device */
+ chip_info->dev = &spi->dev;
+ /*
+ * Set controller data default values:
+ * Polling is supported by default
+ */
+ chip_info->lbm = LOOPBACK_DISABLED;
+ chip_info->com_mode = POLLING_TRANSFER;
+ chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI;
+ chip_info->hierarchy = SSP_SLAVE;
+ chip_info->slave_tx_disable = DO_NOT_DRIVE_TX;
+ chip_info->endian_tx = SSP_TX_LSB;
+ chip_info->endian_rx = SSP_RX_LSB;
+ chip_info->data_size = SSP_DATA_BITS_12;
+ chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM;
+ chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC;
+ chip_info->clk_phase = SSP_CLK_FALLING_EDGE;
+ chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW;
+ chip_info->ctrl_len = SSP_BITS_8;
+ chip_info->wait_state = SSP_MWIRE_WAIT_ZERO;
+ chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX;
+ chip_info->cs_control = null_cs_control;
+ } else {
+ dev_dbg(&spi->dev,
+ "using user supplied controller_data settings\n");
+ }
+
+ /*
+ * We can override with custom divisors, else we use the board
+ * frequency setting
+ */
+ if ((0 == chip_info->clk_freq.cpsdvsr)
+ && (0 == chip_info->clk_freq.scr)) {
+ status = calculate_effective_freq(pl022,
+ spi->max_speed_hz,
+ &chip_info->clk_freq);
+ if (status < 0)
+ goto err_config_params;
+ } else {
+ if ((chip_info->clk_freq.cpsdvsr % 2) != 0)
+ chip_info->clk_freq.cpsdvsr =
+ chip_info->clk_freq.cpsdvsr - 1;
+ }
+ status = verify_controller_parameters(pl022, chip_info);
+ if (status) {
+ dev_err(&spi->dev, "controller data is incorrect");
+ goto err_config_params;
+ }
+ /* Now set controller state based on controller data */
+ chip->xfer_type = chip_info->com_mode;
+ chip->cs_control = chip_info->cs_control;
+
+ if (chip_info->data_size <= 8) {
+ dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n");
+ chip->n_bytes = 1;
+ chip->read = READING_U8;
+ chip->write = WRITING_U8;
+ } else if (chip_info->data_size <= 16) {
+ dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n");
+ chip->n_bytes = 2;
+ chip->read = READING_U16;
+ chip->write = WRITING_U16;
+ } else {
+ if (pl022->vendor->max_bpw >= 32) {
+ dev_dbg(&spi->dev, "17 <= n <= 32 bits per word\n");
+ chip->n_bytes = 4;
+ chip->read = READING_U32;
+ chip->write = WRITING_U32;
+ } else {
+ dev_err(&spi->dev,
+ "illegal data size for this controller!\n");
+ dev_err(&spi->dev,
+ "a standard pl022 can only handle "
+ "1 <= n <= 16 bit words\n");
+ goto err_config_params;
+ }
+ }
+
+ /* Now Initialize all register settings required for this chip */
+ chip->cr0 = 0;
+ chip->cr1 = 0;
+ chip->dmacr = 0;
+ chip->cpsr = 0;
+ if ((chip_info->com_mode == DMA_TRANSFER)
+ && ((pl022->master_info)->enable_dma)) {
+ chip->enable_dma = 1;
+ dev_dbg(&spi->dev, "DMA mode set in controller state\n");
+ status = process_dma_info(chip_info, chip);
+ if (status < 0)
+ goto err_config_params;
+ SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+ SSP_DMACR_MASK_RXDMAE, 0);
+ SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED,
+ SSP_DMACR_MASK_TXDMAE, 1);
+ } else {
+ chip->enable_dma = 0;
+ dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n");
+ SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+ SSP_DMACR_MASK_RXDMAE, 0);
+ SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED,
+ SSP_DMACR_MASK_TXDMAE, 1);
+ }
+
+ chip->cpsr = chip_info->clk_freq.cpsdvsr;
+
+ SSP_WRITE_BITS(chip->cr0, chip_info->data_size, SSP_CR0_MASK_DSS, 0);
+ SSP_WRITE_BITS(chip->cr0, chip_info->duplex, SSP_CR0_MASK_HALFDUP, 5);
+ SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6);
+ SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7);
+ SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8);
+ SSP_WRITE_BITS(chip->cr0, chip_info->ctrl_len, SSP_CR0_MASK_CSS, 16);
+ SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 21);
+ SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0);
+ SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1);
+ SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2);
+ SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3);
+ SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, SSP_CR1_MASK_RENDN, 4);
+ SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, SSP_CR1_MASK_TENDN, 5);
+ SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT, 6);
+ SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL, 7);
+ SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL, 10);
+
+ /* Save controller_state */
+ spi_set_ctldata(spi, chip);
+ return status;
+ err_config_params:
+ err_first_setup:
+ kfree(chip);
+ return status;
+}
+
+/**
+ * pl022_cleanup - cleanup function registered to SPI master framework
+ * @spi: spi device which is requesting cleanup
+ *
+ * This function is registered to the SPI framework for this SPI master
+ * controller. It will free the runtime state of chip.
+ */
+static void pl022_cleanup(struct spi_device *spi)
+{
+ struct chip_data *chip = spi_get_ctldata(spi);
+
+ spi_set_ctldata(spi, NULL);
+ kfree(chip);
+}
+
+
+static int __init
+pl022_probe(struct amba_device *adev, struct amba_id *id)
+{
+ struct device *dev = &adev->dev;
+ struct pl022_ssp_controller *platform_info = adev->dev.platform_data;
+ struct spi_master *master;
+ struct pl022 *pl022 = NULL; /*Data for this driver */
+ int status = 0;
+
+ dev_info(&adev->dev,
+ "ARM PL022 driver, device ID: 0x%08x\n", adev->periphid);
+ if (platform_info == NULL) {
+ dev_err(&adev->dev, "probe - no platform data supplied\n");
+ status = -ENODEV;
+ goto err_no_pdata;
+ }
+
+ /* Allocate master with space for data */
+ master = spi_alloc_master(dev, sizeof(struct pl022));
+ if (master == NULL) {
+ dev_err(&adev->dev, "probe - cannot alloc SPI master\n");
+ status = -ENOMEM;
+ goto err_no_master;
+ }
+
+ pl022 = spi_master_get_devdata(master);
+ pl022->master = master;
+ pl022->master_info = platform_info;
+ pl022->adev = adev;
+ pl022->vendor = id->data;
+
+ /*
+ * Bus Number Which has been Assigned to this SSP controller
+ * on this board
+ */
+ master->bus_num = platform_info->bus_id;
+ master->num_chipselect = platform_info->num_chipselect;
+ master->cleanup = pl022_cleanup;
+ master->setup = pl022_setup;
+ master->transfer = pl022_transfer;
+
+ dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num);
+
+ status = amba_request_regions(adev, NULL);
+ if (status)
+ goto err_no_ioregion;
+
+ pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
+ if (pl022->virtbase == NULL) {
+ status = -ENOMEM;
+ goto err_no_ioremap;
+ }
+ printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
+ adev->res.start, pl022->virtbase);
+
+ pl022->clk = clk_get(&adev->dev, NULL);
+ if (IS_ERR(pl022->clk)) {
+ status = PTR_ERR(pl022->clk);
+ dev_err(&adev->dev, "could not retrieve SSP/SPI bus clock\n");
+ goto err_no_clk;
+ }
+
+ /* Disable SSP */
+ clk_enable(pl022->clk);
+ writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)),
+ SSP_CR1(pl022->virtbase));
+ load_ssp_default_config(pl022);
+ clk_disable(pl022->clk);
+
+ status = request_irq(adev->irq[0], pl022_interrupt_handler, 0, "pl022",
+ pl022);
+ if (status < 0) {
+ dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status);
+ goto err_no_irq;
+ }
+ /* Initialize and start queue */
+ status = init_queue(pl022);
+ if (status != 0) {
+ dev_err(&adev->dev, "probe - problem initializing queue\n");
+ goto err_init_queue;
+ }
+ status = start_queue(pl022);
+ if (status != 0) {
+ dev_err(&adev->dev, "probe - problem starting queue\n");
+ goto err_start_queue;
+ }
+ /* Register with the SPI framework */
+ amba_set_drvdata(adev, pl022);
+ status = spi_register_master(master);
+ if (status != 0) {
+ dev_err(&adev->dev,
+ "probe - problem registering spi master\n");
+ goto err_spi_register;
+ }
+ dev_dbg(dev, "probe succeded\n");
+ return 0;
+
+ err_spi_register:
+ err_start_queue:
+ err_init_queue:
+ destroy_queue(pl022);
+ free_irq(adev->irq[0], pl022);
+ err_no_irq:
+ clk_put(pl022->clk);
+ err_no_clk:
+ iounmap(pl022->virtbase);
+ err_no_ioremap:
+ amba_release_regions(adev);
+ err_no_ioregion:
+ spi_master_put(master);
+ err_no_master:
+ err_no_pdata:
+ return status;
+}
+
+static int __exit
+pl022_remove(struct amba_device *adev)
+{
+ struct pl022 *pl022 = amba_get_drvdata(adev);
+ int status = 0;
+ if (!pl022)
+ return 0;
+
+ /* Remove the queue */
+ status = destroy_queue(pl022);
+ if (status != 0) {
+ dev_err(&adev->dev,
+ "queue remove failed (%d)\n", status);
+ return status;
+ }
+ load_ssp_default_config(pl022);
+ free_irq(adev->irq[0], pl022);
+ clk_disable(pl022->clk);
+ clk_put(pl022->clk);
+ iounmap(pl022->virtbase);
+ amba_release_regions(adev);
+ tasklet_disable(&pl022->pump_transfers);
+ spi_unregister_master(pl022->master);
+ spi_master_put(pl022->master);
+ amba_set_drvdata(adev, NULL);
+ dev_dbg(&adev->dev, "remove succeded\n");
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pl022_suspend(struct amba_device *adev, pm_message_t state)
+{
+ struct pl022 *pl022 = amba_get_drvdata(adev);
+ int status = 0;
+
+ status = stop_queue(pl022);
+ if (status) {
+ dev_warn(&adev->dev, "suspend cannot stop queue\n");
+ return status;
+ }
+
+ clk_enable(pl022->clk);
+ load_ssp_default_config(pl022);
+ clk_disable(pl022->clk);
+ dev_dbg(&adev->dev, "suspended\n");
+ return 0;
+}
+
+static int pl022_resume(struct amba_device *adev)
+{
+ struct pl022 *pl022 = amba_get_drvdata(adev);
+ int status = 0;
+
+ /* Start the queue running */
+ status = start_queue(pl022);
+ if (status)
+ dev_err(&adev->dev, "problem starting queue (%d)\n", status);
+ else
+ dev_dbg(&adev->dev, "resumed\n");
+
+ return status;
+}
+#else
+#define pl022_suspend NULL
+#define pl022_resume NULL
+#endif /* CONFIG_PM */
+
+static struct vendor_data vendor_arm = {
+ .fifodepth = 8,
+ .max_bpw = 16,
+ .unidir = false,
+};
+
+
+static struct vendor_data vendor_st = {
+ .fifodepth = 32,
+ .max_bpw = 32,
+ .unidir = false,
+};
+
+static struct amba_id pl022_ids[] = {
+ {
+ /*
+ * ARM PL022 variant, this has a 16bit wide
+ * and 8 locations deep TX/RX FIFO
+ */
+ .id = 0x00041022,
+ .mask = 0x000fffff,
+ .data = &vendor_arm,
+ },
+ {
+ /*
+ * ST Micro derivative, this has 32bit wide
+ * and 32 locations deep TX/RX FIFO
+ */
+ .id = 0x00108022,
+ .mask = 0xffffffff,
+ .data = &vendor_st,
+ },
+ { 0, 0 },
+};
+
+static struct amba_driver pl022_driver = {
+ .drv = {
+ .name = "ssp-pl022",
+ },
+ .id_table = pl022_ids,
+ .probe = pl022_probe,
+ .remove = __exit_p(pl022_remove),
+ .suspend = pl022_suspend,
+ .resume = pl022_resume,
+};
+
+
+static int __init pl022_init(void)
+{
+ return amba_driver_register(&pl022_driver);
+}
+
+module_init(pl022_init);
+
+static void __exit pl022_exit(void)
+{
+ amba_driver_unregister(&pl022_driver);
+}
+
+module_exit(pl022_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("PL022 SSP Controller Driver");
+MODULE_LICENSE("GPL");
#include <linux/spinlock.h>
#include <linux/workqueue.h>
#include <linux/platform_device.h>
+#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi_bitbang.h>
obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
-obj-$(CONFIG_USB_ISP1760_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_FHCI_HCD) += host/
{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
},
{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
if (ep->desc) {
list_add_tail(&req->queue, &ep->queue);
- if (ep->is_in || (ep_is_control(ep)
+ if ((!ep_is_control(ep) && ep->is_in) ||
+ (ep_is_control(ep)
&& (ep->state == DATA_STAGE_IN
|| ep->state == STATUS_STAGE_IN)))
usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
clk_disable(pclk);
- usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
+ usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep,
GFP_KERNEL);
if (!usba_ep)
goto err_alloc_ep;
u32 reg_base, or_reg, skip_reg;
unsigned long flags;
struct ptd ptd;
+ packet_enqueue *pe;
switch (usb_pipetype(urb->pipe)) {
case PIPE_ISOCHRONOUS:
reg_base = INT_REGS_OFFSET;
or_reg = HC_INT_IRQ_MASK_OR_REG;
skip_reg = HC_INT_PTD_SKIPMAP_REG;
+ pe = enqueue_an_INT_packet;
break;
default:
reg_base = ATL_REGS_OFFSET;
or_reg = HC_ATL_IRQ_MASK_OR_REG;
skip_reg = HC_ATL_PTD_SKIPMAP_REG;
+ pe = enqueue_an_ATL_packet;
break;
}
u32 skip_map;
u32 or_map;
struct isp1760_qtd *qtd;
+ struct isp1760_qh *qh = ints->qh;
skip_map = isp1760_readl(hcd->regs + skip_reg);
skip_map |= 1 << i;
priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
+ i * sizeof(ptd), sizeof(ptd));
qtd = ints->qtd;
-
- clean_up_qtdlist(qtd);
+ qtd = clean_up_qtdlist(qtd);
free_mem(priv, ints->payload);
ints->payload = 0;
isp1760_urb_done(priv, urb, status);
+ if (qtd)
+ pe(hcd, qh, qtd);
break;
+
+ } else if (ints->qtd) {
+ struct isp1760_qtd *qtd, *prev_qtd = ints->qtd;
+
+ for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) {
+ if (qtd->urb == urb) {
+ prev_qtd->hw_next = clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, status);
+ break;
+ }
+ prev_qtd = qtd;
+ }
+ /* we found the urb before the end of the list */
+ if (qtd)
+ break;
}
ints++;
}
struct usb_hcd *hcd;
if (pdev->resource[1].flags != IORESOURCE_IRQ) {
- pr_debug("resource[1] is not IORESOURCE_IRQ");
+ dbg("resource[1] is not IORESOURCE_IRQ");
return -ENOMEM;
}
hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
if (hcd->regs == NULL) {
- pr_debug("ioremap failed");
+ dbg("ioremap failed");
retval = -ENOMEM;
goto err2;
}
- usb_host_clock = clk_get(&pdev->dev, "usb_host");
+ usb_host_clock = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(usb_host_clock)) {
+ dbg("clk_get failed");
+ retval = PTR_ERR(usb_host_clock);
+ goto err3;
+ }
+
ep93xx_start_hc(&pdev->dev);
ohci_hcd_init(hcd_to_ohci(hcd));
return retval;
ep93xx_stop_hc(&pdev->dev);
+err3:
iounmap(hcd->regs);
err2:
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
if (retval > 0) {
/* quietly accept this device, but don't bind to a
serial port as it's about to disappear */
+ serial->num_ports = 0;
goto exit;
}
}
config FB_IMX
tristate "Motorola i.MX LCD support"
- depends on FB && (ARCH_IMX || ARCH_MX2)
+ depends on FB && (ARCH_MX1 || ARCH_MX2)
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
}
fb->fb.fix.mmio_start = fb->dev->res.start;
- fb->fb.fix.mmio_len = 4096;
+ fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
if (!fb->regs) {
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
-#define ATMEL_LCDC_DMA_BURST_LEN 8
-
-#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
- defined(CONFIG_ARCH_AT91SAM9RL)
-#define ATMEL_LCDC_FIFO_SIZE 2048
-#else
-#define ATMEL_LCDC_FIFO_SIZE 512
-#endif
+#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
+#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
#if defined(CONFIG_ARCH_AT91)
#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq);
/* We only need one interrupt, it will be re-enabled as needed */
- disable_irq(ichannel->eof_irq);
+ disable_irq_nosync(ichannel->eof_irq);
complete(&mx3_fbi->flip_cmpl);
}
mx3fb_blank(FB_BLANK_UNBLANK, fbi);
- dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode);
+ dev_info(dev, "registered, using mode %s\n", fb_mode);
ret = register_framebuffer(fbi);
if (ret < 0)
struct lcd_ctrl_extif *extif;
struct lcd_ctrl *int_ctrl;
- void (*power_up)(struct device *dev);
- void (*power_down)(struct device *dev);
+ struct clk *sys_ck;
} hwa742;
struct lcd_ctrl hwa742_ctrl;
hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
/* Enable sleep mode */
hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
- if (hwa742.power_down != NULL)
- hwa742.power_down(hwa742.fbdev->dev);
+ clk_disable(hwa742.sys_ck);
}
static void hwa742_resume(void)
{
- if (hwa742.power_up != NULL)
- hwa742.power_up(hwa742.fbdev->dev);
+ clk_enable(hwa742.sys_ck);
+
/* Disable sleep mode */
hwa742_write_reg(HWA742_POWER_SAVE, 0);
while (1) {
omapfb_conf = fbdev->dev->platform_data;
ctrl_conf = omapfb_conf->ctrl_platform_data;
- if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) {
+ if (ctrl_conf == NULL) {
dev_err(fbdev->dev, "HWA742: missing platform data\n");
r = -ENOENT;
goto err1;
}
- hwa742.power_down = ctrl_conf->power_down;
- hwa742.power_up = ctrl_conf->power_up;
+ hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
spin_lock_init(&hwa742.req_lock);
if ((r = hwa742.extif->init(fbdev)) < 0)
goto err2;
- ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
+ ext_clk = clk_get_rate(hwa742.sys_ck);
if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
goto err3;
hwa742.extif->set_timings(&hwa742.reg_timings);
- if (hwa742.power_up != NULL)
- hwa742.power_up(fbdev->dev);
+ clk_enable(hwa742.sys_ck);
calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
return 0;
err4:
- if (hwa742.power_down != NULL)
- hwa742.power_down(fbdev->dev);
+ clk_disable(hwa742.sys_ck);
err3:
hwa742.extif->cleanup();
err2:
hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
hwa742.extif->cleanup();
hwa742.int_ctrl->cleanup();
- if (hwa742.power_down != NULL)
- hwa742.power_down(hwa742.fbdev->dev);
+ clk_disable(hwa742.sys_ck);
}
struct lcd_ctrl hwa742_ctrl = {
int win;
for (win = 0; win <= S3C_FB_MAX_WIN; win++)
- s3c_fb_release_win(sfb, sfb->windows[win]);
+ if (sfb->windows[win])
+ s3c_fb_release_win(sfb, sfb->windows[win]);
iounmap(sfb->regs);
static int s3c_fb_resume(struct platform_device *pdev)
{
struct s3c_fb *sfb = platform_get_drvdata(pdev);
+ struct s3c_fb_platdata *pd = sfb->pdata;
struct s3c_fb_win *win;
int win_no;
clk_enable(sfb->bus_clk);
+ /* setup registers */
+ writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+ /* zero all windows before we do anything */
+ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++)
+ s3c_fb_clear_win(sfb, win_no);
+
+ /* restore framebuffers */
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
win = sfb->windows[win_no];
if (!win)
NOTE: once enabled, this timer cannot be disabled.
Say N if you are unsure.
-config ORION5X_WATCHDOG
- tristate "Orion5x watchdog"
- depends on ARCH_ORION5X
+config ORION_WATCHDOG
+ tristate "Orion watchdog"
+ depends on ARCH_ORION5X || ARCH_KIRKWOOD
help
Say Y here if to include support for the watchdog timer
- in the Orion5x ARM SoCs.
+ in the Marvell Orion5x and Kirkwood ARM SoCs.
To compile this driver as a module, choose M here: the
- module will be called orion5x_wdt.
+ module will be called orion_wdt.
# AVR32 Architecture
obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
obj-$(CONFIG_IOP_WATCHDOG) += iop_wdt.o
obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
-obj-$(CONFIG_ORION5X_WATCHDOG) += orion5x_wdt.o
+obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
/*
- * drivers/watchdog/orion5x_wdt.c
+ * drivers/watchdog/orion_wdt.c
*
- * Watchdog driver for Orion5x processors
+ * Watchdog driver for Orion/Kirkwood processors
*
* Author: Sylver Bruneau <sylver.bruneau@googlemail.com>
*
#include <linux/io.h>
#include <linux/spinlock.h>
#include <mach/bridge-regs.h>
-#include <plat/orion5x_wdt.h>
+#include <plat/orion_wdt.h>
/*
* Watchdog timer block registers.
static unsigned long wdt_status;
static spinlock_t wdt_lock;
-static void orion5x_wdt_ping(void)
+static void orion_wdt_ping(void)
{
spin_lock(&wdt_lock);
spin_unlock(&wdt_lock);
}
-static void orion5x_wdt_enable(void)
+static void orion_wdt_enable(void)
{
u32 reg;
writel(reg, TIMER_CTRL);
/* Enable reset on watchdog */
- reg = readl(CPU_RESET_MASK);
- reg |= WDT_RESET;
- writel(reg, CPU_RESET_MASK);
+ reg = readl(RSTOUTn_MASK);
+ reg |= WDT_RESET_OUT_EN;
+ writel(reg, RSTOUTn_MASK);
spin_unlock(&wdt_lock);
}
-static void orion5x_wdt_disable(void)
+static void orion_wdt_disable(void)
{
u32 reg;
spin_lock(&wdt_lock);
/* Disable reset on watchdog */
- reg = readl(CPU_RESET_MASK);
- reg &= ~WDT_RESET;
- writel(reg, CPU_RESET_MASK);
+ reg = readl(RSTOUTn_MASK);
+ reg &= ~WDT_RESET_OUT_EN;
+ writel(reg, RSTOUTn_MASK);
/* Disable watchdog timer */
reg = readl(TIMER_CTRL);
spin_unlock(&wdt_lock);
}
-static int orion5x_wdt_get_timeleft(int *time_left)
+static int orion_wdt_get_timeleft(int *time_left)
{
spin_lock(&wdt_lock);
*time_left = readl(WDT_VAL) / wdt_tclk;
return 0;
}
-static int orion5x_wdt_open(struct inode *inode, struct file *file)
+static int orion_wdt_open(struct inode *inode, struct file *file)
{
if (test_and_set_bit(WDT_IN_USE, &wdt_status))
return -EBUSY;
clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
- orion5x_wdt_enable();
+ orion_wdt_enable();
return nonseekable_open(inode, file);
}
-static ssize_t orion5x_wdt_write(struct file *file, const char *data,
+static ssize_t orion_wdt_write(struct file *file, const char *data,
size_t len, loff_t *ppos)
{
if (len) {
set_bit(WDT_OK_TO_CLOSE, &wdt_status);
}
}
- orion5x_wdt_ping();
+ orion_wdt_ping();
}
return len;
}
-static int orion5x_wdt_settimeout(int new_time)
+static int orion_wdt_settimeout(int new_time)
{
if ((new_time <= 0) || (new_time > wdt_max_duration))
return -EINVAL;
/* Set new watchdog time to be used when
- * orion5x_wdt_enable() or orion5x_wdt_ping() is called. */
+ * orion_wdt_enable() or orion_wdt_ping() is called. */
heartbeat = new_time;
return 0;
}
static const struct watchdog_info ident = {
.options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT |
WDIOF_KEEPALIVEPING,
- .identity = "Orion5x Watchdog",
+ .identity = "Orion Watchdog",
};
-static long orion5x_wdt_ioctl(struct file *file, unsigned int cmd,
+static long orion_wdt_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
int ret = -ENOTTY;
break;
case WDIOC_KEEPALIVE:
- orion5x_wdt_ping();
+ orion_wdt_ping();
ret = 0;
break;
if (ret)
break;
- if (orion5x_wdt_settimeout(time)) {
+ if (orion_wdt_settimeout(time)) {
ret = -EINVAL;
break;
}
- orion5x_wdt_ping();
+ orion_wdt_ping();
/* Fall through */
case WDIOC_GETTIMEOUT:
break;
case WDIOC_GETTIMELEFT:
- if (orion5x_wdt_get_timeleft(&time)) {
+ if (orion_wdt_get_timeleft(&time)) {
ret = -EINVAL;
break;
}
return ret;
}
-static int orion5x_wdt_release(struct inode *inode, struct file *file)
+static int orion_wdt_release(struct inode *inode, struct file *file)
{
if (test_bit(WDT_OK_TO_CLOSE, &wdt_status))
- orion5x_wdt_disable();
+ orion_wdt_disable();
else
printk(KERN_CRIT "WATCHDOG: Device closed unexpectedly - "
"timer will not stop\n");
}
-static const struct file_operations orion5x_wdt_fops = {
+static const struct file_operations orion_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .write = orion5x_wdt_write,
- .unlocked_ioctl = orion5x_wdt_ioctl,
- .open = orion5x_wdt_open,
- .release = orion5x_wdt_release,
+ .write = orion_wdt_write,
+ .unlocked_ioctl = orion_wdt_ioctl,
+ .open = orion_wdt_open,
+ .release = orion_wdt_release,
};
-static struct miscdevice orion5x_wdt_miscdev = {
+static struct miscdevice orion_wdt_miscdev = {
.minor = WATCHDOG_MINOR,
.name = "watchdog",
- .fops = &orion5x_wdt_fops,
+ .fops = &orion_wdt_fops,
};
-static int __devinit orion5x_wdt_probe(struct platform_device *pdev)
+static int __devinit orion_wdt_probe(struct platform_device *pdev)
{
- struct orion5x_wdt_platform_data *pdata = pdev->dev.platform_data;
+ struct orion_wdt_platform_data *pdata = pdev->dev.platform_data;
int ret;
if (pdata) {
wdt_tclk = pdata->tclk;
} else {
- printk(KERN_ERR "Orion5x Watchdog misses platform data\n");
+ printk(KERN_ERR "Orion Watchdog misses platform data\n");
return -ENODEV;
}
- if (orion5x_wdt_miscdev.parent)
+ if (orion_wdt_miscdev.parent)
return -EBUSY;
- orion5x_wdt_miscdev.parent = &pdev->dev;
+ orion_wdt_miscdev.parent = &pdev->dev;
wdt_max_duration = WDT_MAX_CYCLE_COUNT / wdt_tclk;
- if (orion5x_wdt_settimeout(heartbeat))
+ if (orion_wdt_settimeout(heartbeat))
heartbeat = wdt_max_duration;
- ret = misc_register(&orion5x_wdt_miscdev);
+ ret = misc_register(&orion_wdt_miscdev);
if (ret)
return ret;
- printk(KERN_INFO "Orion5x Watchdog Timer: Initial timeout %d sec%s\n",
+ printk(KERN_INFO "Orion Watchdog Timer: Initial timeout %d sec%s\n",
heartbeat, nowayout ? ", nowayout" : "");
return 0;
}
-static int __devexit orion5x_wdt_remove(struct platform_device *pdev)
+static int __devexit orion_wdt_remove(struct platform_device *pdev)
{
int ret;
if (test_bit(WDT_IN_USE, &wdt_status)) {
- orion5x_wdt_disable();
+ orion_wdt_disable();
clear_bit(WDT_IN_USE, &wdt_status);
}
- ret = misc_deregister(&orion5x_wdt_miscdev);
+ ret = misc_deregister(&orion_wdt_miscdev);
if (!ret)
- orion5x_wdt_miscdev.parent = NULL;
+ orion_wdt_miscdev.parent = NULL;
return ret;
}
-static void orion5x_wdt_shutdown(struct platform_device *pdev)
+static void orion_wdt_shutdown(struct platform_device *pdev)
{
if (test_bit(WDT_IN_USE, &wdt_status))
- orion5x_wdt_disable();
+ orion_wdt_disable();
}
-static struct platform_driver orion5x_wdt_driver = {
- .probe = orion5x_wdt_probe,
- .remove = __devexit_p(orion5x_wdt_remove),
- .shutdown = orion5x_wdt_shutdown,
+static struct platform_driver orion_wdt_driver = {
+ .probe = orion_wdt_probe,
+ .remove = __devexit_p(orion_wdt_remove),
+ .shutdown = orion_wdt_shutdown,
.driver = {
.owner = THIS_MODULE,
- .name = "orion5x_wdt",
+ .name = "orion_wdt",
},
};
-static int __init orion5x_wdt_init(void)
+static int __init orion_wdt_init(void)
{
spin_lock_init(&wdt_lock);
- return platform_driver_register(&orion5x_wdt_driver);
+ return platform_driver_register(&orion_wdt_driver);
}
-static void __exit orion5x_wdt_exit(void)
+static void __exit orion_wdt_exit(void)
{
- platform_driver_unregister(&orion5x_wdt_driver);
+ platform_driver_unregister(&orion_wdt_driver);
}
-module_init(orion5x_wdt_init);
-module_exit(orion5x_wdt_exit);
+module_init(orion_wdt_init);
+module_exit(orion_wdt_exit);
MODULE_AUTHOR("Sylver Bruneau <sylver.bruneau@googlemail.com>");
-MODULE_DESCRIPTION("Orion5x Processor Watchdog");
+MODULE_DESCRIPTION("Orion Processor Watchdog");
module_param(heartbeat, int, 0);
MODULE_PARM_DESC(heartbeat, "Initial watchdog heartbeat in seconds");
#include <asm/uaccess.h>
#include <asm/unaligned.h>
#include <asm/cacheflush.h>
+#include <asm/page.h>
/****************************************************************************/
#define DBG_FLT(a...)
#endif
+/*
+ * User data (stack, data section and bss) needs to be aligned
+ * for the same reasons as SLAB memory is, and to the same amount.
+ * Avoid duplicating architecture specific code by using the same
+ * macro as with SLAB allocation:
+ */
+#ifdef ARCH_SLAB_MINALIGN
+#define FLAT_DATA_ALIGN (ARCH_SLAB_MINALIGN)
+#else
+#define FLAT_DATA_ALIGN (sizeof(void *))
+#endif
+
#define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
#define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
int envc = bprm->envc;
char uninitialized_var(dummy);
- sp = (unsigned long *) ((-(unsigned long)sizeof(char *))&(unsigned long) p);
+ sp = (unsigned long *)p;
+ sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+ sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
+ argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+ envp = argv + (argc + 1);
- sp -= envc+1;
- envp = sp;
- sp -= argc+1;
- argv = sp;
-
- flat_stack_align(sp);
if (flat_argvp_envp_on_stack()) {
- --sp; put_user((unsigned long) envp, sp);
- --sp; put_user((unsigned long) argv, sp);
+ put_user((unsigned long) envp, sp + 2);
+ put_user((unsigned long) argv, sp + 1);
}
- put_user(argc,--sp);
+ put_user(argc, sp);
current->mm->arg_start = (unsigned long) p;
while (argc-->0) {
put_user((unsigned long) p, argv++);
ret = realdatastart;
goto err;
}
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
(int)(data_len + bss_len + stack_len), (int)datapos);
}
realdatastart = textpos + ntohl(hdr->data_start);
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
- reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
- MAX_SHARED_LIBS * sizeof(unsigned long));
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
+
+ reloc = (unsigned long *)
+ (datapos + (ntohl(hdr->reloc_start) - text_len));
memp = textpos;
memp_size = len;
#ifdef CONFIG_BINFMT_ZFLAT
stack_len = TOP_OF_ARGS - bprm->p; /* the strings */
stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
-
+ stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */
res = load_flat_file(bprm, &libinfo, 0, &stack_len);
if (res > (unsigned long)-4096)
}
/*
- * cf-bind.c
+ * bind.c
*/
extern int cachefiles_daemon_bind(struct cachefiles_cache *cache, char *args);
extern void cachefiles_daemon_unbind(struct cachefiles_cache *cache);
/*
- * cf-daemon.c
+ * daemon.c
*/
extern const struct file_operations cachefiles_daemon_fops;
unsigned fnr, unsigned bnr);
/*
- * cf-interface.c
+ * interface.c
*/
extern const struct fscache_cache_ops cachefiles_cache_ops;
/*
- * cf-key.c
+ * key.c
*/
extern char *cachefiles_cook_key(const u8 *raw, int keylen, uint8_t type);
/*
- * cf-namei.c
+ * namei.c
*/
extern int cachefiles_delete_object(struct cachefiles_cache *cache,
struct cachefiles_object *object);
struct dentry *dir, char *filename);
/*
- * cf-proc.c
+ * proc.c
*/
#ifdef CONFIG_CACHEFILES_HISTOGRAM
extern atomic_t cachefiles_lookup_histogram[HZ];
#endif
/*
- * cf-rdwr.c
+ * rdwr.c
*/
extern int cachefiles_read_or_alloc_page(struct fscache_retrieval *,
struct page *, gfp_t);
extern void cachefiles_uncache_page(struct fscache_object *, struct page *);
/*
- * cf-security.c
+ * security.c
*/
extern int cachefiles_get_security_ID(struct cachefiles_cache *cache);
extern int cachefiles_determine_cache_security(struct cachefiles_cache *cache,
}
/*
- * cf-xattr.c
+ * xattr.c
*/
extern int cachefiles_check_object_type(struct cachefiles_object *object);
extern int cachefiles_set_object_xattr(struct cachefiles_object *object,
#define FSCACHE_MAX_THREADS 32
/*
- * fsc-cache.c
+ * cache.c
*/
extern struct list_head fscache_cache_list;
extern struct rw_semaphore fscache_addremove_sem;
struct fscache_cookie *);
/*
- * fsc-cookie.c
+ * cookie.c
*/
extern struct kmem_cache *fscache_cookie_jar;
extern void __fscache_cookie_put(struct fscache_cookie *);
/*
- * fsc-fsdef.c
+ * fsdef.c
*/
extern struct fscache_cookie fscache_fsdef_index;
extern struct fscache_cookie_def fscache_fsdef_netfs_def;
/*
- * fsc-histogram.c
+ * histogram.c
*/
#ifdef CONFIG_FSCACHE_HISTOGRAM
extern atomic_t fscache_obj_instantiate_histogram[HZ];
#endif
/*
- * fsc-main.c
+ * main.c
*/
extern unsigned fscache_defer_lookup;
extern unsigned fscache_defer_create;
extern int fscache_wait_bit_interruptible(void *);
/*
- * fsc-object.c
+ * object.c
*/
extern void fscache_withdrawing_object(struct fscache_cache *,
struct fscache_object *);
extern void fscache_enqueue_object(struct fscache_object *);
/*
- * fsc-operation.c
+ * operation.c
*/
extern int fscache_submit_exclusive_op(struct fscache_object *,
struct fscache_operation *);
extern void fscache_operation_gc(struct work_struct *);
/*
- * fsc-proc.c
+ * proc.c
*/
#ifdef CONFIG_PROC_FS
extern int __init fscache_proc_init(void);
#endif
/*
- * fsc-stats.c
+ * stats.c
*/
#ifdef CONFIG_FSCACHE_STATS
extern atomic_t fscache_n_ops_processed[FSCACHE_MAX_THREADS];
return;
filebad:
- mutex_lock(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- /* Stick it on a list (any list) so erase_failed can take it
- right off again. Silly, but shouldn't happen often. */
- list_move(&jeb->list, &c->erasing_list);
- spin_unlock(&c->erase_completion_lock);
- mutex_unlock(&c->erase_free_sem);
jffs2_erase_failed(c, jeb, bad_offset);
return;
unsigned long timestamp = (unsigned long)data;
if (task->tk_status < 0) {
- switch (task->tk_status) {
- case -NFS4ERR_STALE_CLIENTID:
- case -NFS4ERR_EXPIRED:
- case -NFS4ERR_CB_PATH_DOWN:
- nfs4_schedule_state_recovery(clp);
- }
+ /* Unless we're shutting down, schedule state recovery! */
+ if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) != 0)
+ nfs4_schedule_state_recovery(clp);
return;
}
spin_lock(&clp->cl_lock);
Opt_err
};
-static match_table_t __initconst tokens = {
+static const match_table_t tokens __initconst = {
{Opt_port, "port=%u"},
{Opt_rsize, "rsize=%u"},
{Opt_wsize, "wsize=%u"},
host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset);
set_fs(oldfs);
if (host_err >= 0) {
+ *cnt = host_err;
nfsdstats.io_write += host_err;
fsnotify_modify(file->f_path.dentry);
}
}
dprintk("nfsd: write complete host_err=%d\n", host_err);
- if (host_err >= 0) {
+ if (host_err >= 0)
err = 0;
- *cnt = host_err;
- } else
+ else
err = nfserrno(host_err);
out:
return err;
ret = nilfs_cpfile_get_checkpoint_block(cpfile, cno, 0, &cp_bh);
if (ret < 0) {
if (ret != -ENOENT)
- goto out_sem;
+ goto out_header;
/* skip hole */
ret = 0;
continue;
continue;
printk(KERN_ERR "%s: cannot delete block\n",
__func__);
- goto out_sem;
+ goto out_header;
}
}
nilfs_mdt_mark_dirty(cpfile);
kunmap_atomic(kaddr, KM_USER0);
}
+
+ out_header:
brelse(header_bh);
out_sem:
const struct pid_entry *p = ptr;
struct inode *inode;
struct proc_inode *ei;
- struct dentry *error = ERR_PTR(-EINVAL);
+ struct dentry *error = ERR_PTR(-ENOENT);
inode = proc_pid_make_inode(dir->i_sb, task);
if (!inode)
mutex_unlock(&sysfs_workq_mutex);
if (sysfs_workqueue == NULL) {
- sysfs_workqueue = create_workqueue("sysfsd");
+ sysfs_workqueue = create_singlethread_workqueue("sysfsd");
if (sysfs_workqueue == NULL) {
module_put(owner);
return -ENOMEM;
static inline int
kmem_shake_allow(gfp_t gfp_mask)
{
- return (gfp_mask & __GFP_WAIT) != 0;
+ return ((gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS));
}
#endif /* __XFS_SUPPORT_KMEM_H__ */
error = xfs_trans_commit(tp, XFS_TRANS_SWAPEXT);
-out_unlock:
- xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
out:
kmem_free(tempifp);
return error;
+out_unlock:
+ xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ goto out;
+
out_trans_cancel:
xfs_trans_cancel(tp, 0);
goto out_unlock;
nagcount = new + (nb_mod != 0);
if (nb_mod && nb_mod < XFS_MIN_AG_BLOCKS) {
nagcount--;
- nb = nagcount * mp->m_sb.sb_agblocks;
+ nb = (xfs_rfsblock_t)nagcount * mp->m_sb.sb_agblocks;
if (nb < mp->m_sb.sb_dblocks)
return XFS_ERROR(EINVAL);
}
{
return kcalloc(nmemb, size, GFP_KERNEL);
}
+
+static __inline__ void *drm_calloc_large(size_t nmemb, size_t size)
+{
+ u8 *addr;
+
+ if (size <= PAGE_SIZE)
+ return kcalloc(nmemb, size, GFP_KERNEL);
+
+ addr = vmalloc(nmemb * size);
+ if (!addr)
+ return NULL;
+
+ memset(addr, 0, nmemb * size);
+
+ return addr;
+}
+
+static __inline void drm_free_large(void *ptr)
+{
+ if (!is_vmalloc_addr(ptr))
+ return kfree(ptr);
+
+ vfree(ptr);
+}
#else
extern void *drm_alloc(size_t size, int area);
extern void drm_free(void *pt, size_t size, int area);
--- /dev/null
+/*
+ * include/linux/amba/pl022.h
+ *
+ * Copyright (C) 2008-2009 ST-Ericsson AB
+ * Copyright (C) 2006 STMicroelectronics Pvt. Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ *
+ * Initial version inspired by:
+ * linux-2.6.17-rc3-mm1/drivers/spi/pxa2xx_spi.c
+ * Initial adoption to PL022 by:
+ * Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SSP_PL022_H
+#define _SSP_PL022_H
+
+#include <linux/device.h>
+
+/**
+ * whether SSP is in loopback mode or not
+ */
+enum ssp_loopback {
+ LOOPBACK_DISABLED,
+ LOOPBACK_ENABLED
+};
+
+/**
+ * enum ssp_interface - interfaces allowed for this SSP Controller
+ * @SSP_INTERFACE_MOTOROLA_SPI: Motorola Interface
+ * @SSP_INTERFACE_TI_SYNC_SERIAL: Texas Instrument Synchronous Serial
+ * interface
+ * @SSP_INTERFACE_NATIONAL_MICROWIRE: National Semiconductor Microwire
+ * interface
+ * @SSP_INTERFACE_UNIDIRECTIONAL: Unidirectional interface (STn8810
+ * &STn8815 only)
+ */
+enum ssp_interface {
+ SSP_INTERFACE_MOTOROLA_SPI,
+ SSP_INTERFACE_TI_SYNC_SERIAL,
+ SSP_INTERFACE_NATIONAL_MICROWIRE,
+ SSP_INTERFACE_UNIDIRECTIONAL
+};
+
+/**
+ * enum ssp_hierarchy - whether SSP is configured as Master or Slave
+ */
+enum ssp_hierarchy {
+ SSP_MASTER,
+ SSP_SLAVE
+};
+
+/**
+ * enum ssp_clock_params - clock parameters, to set SSP clock at a
+ * desired freq
+ */
+struct ssp_clock_params {
+ u8 cpsdvsr; /* value from 2 to 254 (even only!) */
+ u8 scr; /* value from 0 to 255 */
+};
+
+/**
+ * enum ssp_rx_endian - endianess of Rx FIFO Data
+ */
+enum ssp_rx_endian {
+ SSP_RX_MSB,
+ SSP_RX_LSB
+};
+
+/**
+ * enum ssp_tx_endian - endianess of Tx FIFO Data
+ */
+enum ssp_tx_endian {
+ SSP_TX_MSB,
+ SSP_TX_LSB
+};
+
+/**
+ * enum ssp_data_size - number of bits in one data element
+ */
+enum ssp_data_size {
+ SSP_DATA_BITS_4 = 0x03, SSP_DATA_BITS_5, SSP_DATA_BITS_6,
+ SSP_DATA_BITS_7, SSP_DATA_BITS_8, SSP_DATA_BITS_9,
+ SSP_DATA_BITS_10, SSP_DATA_BITS_11, SSP_DATA_BITS_12,
+ SSP_DATA_BITS_13, SSP_DATA_BITS_14, SSP_DATA_BITS_15,
+ SSP_DATA_BITS_16, SSP_DATA_BITS_17, SSP_DATA_BITS_18,
+ SSP_DATA_BITS_19, SSP_DATA_BITS_20, SSP_DATA_BITS_21,
+ SSP_DATA_BITS_22, SSP_DATA_BITS_23, SSP_DATA_BITS_24,
+ SSP_DATA_BITS_25, SSP_DATA_BITS_26, SSP_DATA_BITS_27,
+ SSP_DATA_BITS_28, SSP_DATA_BITS_29, SSP_DATA_BITS_30,
+ SSP_DATA_BITS_31, SSP_DATA_BITS_32
+};
+
+/**
+ * enum ssp_mode - SSP mode of operation (Communication modes)
+ */
+enum ssp_mode {
+ INTERRUPT_TRANSFER,
+ POLLING_TRANSFER,
+ DMA_TRANSFER
+};
+
+/**
+ * enum ssp_rx_level_trig - receive FIFO watermark level which triggers
+ * IT: Interrupt fires when _N_ or more elements in RX FIFO.
+ */
+enum ssp_rx_level_trig {
+ SSP_RX_1_OR_MORE_ELEM,
+ SSP_RX_4_OR_MORE_ELEM,
+ SSP_RX_8_OR_MORE_ELEM,
+ SSP_RX_16_OR_MORE_ELEM,
+ SSP_RX_32_OR_MORE_ELEM
+};
+
+/**
+ * Transmit FIFO watermark level which triggers (IT Interrupt fires
+ * when _N_ or more empty locations in TX FIFO)
+ */
+enum ssp_tx_level_trig {
+ SSP_TX_1_OR_MORE_EMPTY_LOC,
+ SSP_TX_4_OR_MORE_EMPTY_LOC,
+ SSP_TX_8_OR_MORE_EMPTY_LOC,
+ SSP_TX_16_OR_MORE_EMPTY_LOC,
+ SSP_TX_32_OR_MORE_EMPTY_LOC
+};
+
+/**
+ * enum SPI Clock Phase - clock phase (Motorola SPI interface only)
+ * @SSP_CLK_RISING_EDGE: Receive data on rising edge
+ * @SSP_CLK_FALLING_EDGE: Receive data on falling edge
+ */
+enum ssp_spi_clk_phase {
+ SSP_CLK_RISING_EDGE,
+ SSP_CLK_FALLING_EDGE
+};
+
+/**
+ * enum SPI Clock Polarity - clock polarity (Motorola SPI interface only)
+ * @SSP_CLK_POL_IDLE_LOW: Low inactive level
+ * @SSP_CLK_POL_IDLE_HIGH: High inactive level
+ */
+enum ssp_spi_clk_pol {
+ SSP_CLK_POL_IDLE_LOW,
+ SSP_CLK_POL_IDLE_HIGH
+};
+
+/**
+ * Microwire Conrol Lengths Command size in microwire format
+ */
+enum ssp_microwire_ctrl_len {
+ SSP_BITS_4 = 0x03, SSP_BITS_5, SSP_BITS_6,
+ SSP_BITS_7, SSP_BITS_8, SSP_BITS_9,
+ SSP_BITS_10, SSP_BITS_11, SSP_BITS_12,
+ SSP_BITS_13, SSP_BITS_14, SSP_BITS_15,
+ SSP_BITS_16, SSP_BITS_17, SSP_BITS_18,
+ SSP_BITS_19, SSP_BITS_20, SSP_BITS_21,
+ SSP_BITS_22, SSP_BITS_23, SSP_BITS_24,
+ SSP_BITS_25, SSP_BITS_26, SSP_BITS_27,
+ SSP_BITS_28, SSP_BITS_29, SSP_BITS_30,
+ SSP_BITS_31, SSP_BITS_32
+};
+
+/**
+ * enum Microwire Wait State
+ * @SSP_MWIRE_WAIT_ZERO: No wait state inserted after last command bit
+ * @SSP_MWIRE_WAIT_ONE: One wait state inserted after last command bit
+ */
+enum ssp_microwire_wait_state {
+ SSP_MWIRE_WAIT_ZERO,
+ SSP_MWIRE_WAIT_ONE
+};
+
+/**
+ * enum Microwire - whether Full/Half Duplex
+ * @SSP_MICROWIRE_CHANNEL_FULL_DUPLEX: SSPTXD becomes bi-directional,
+ * SSPRXD not used
+ * @SSP_MICROWIRE_CHANNEL_HALF_DUPLEX: SSPTXD is an output, SSPRXD is
+ * an input.
+ */
+enum ssp_duplex {
+ SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
+ SSP_MICROWIRE_CHANNEL_HALF_DUPLEX
+};
+
+/**
+ * CHIP select/deselect commands
+ */
+enum ssp_chip_select {
+ SSP_CHIP_SELECT,
+ SSP_CHIP_DESELECT
+};
+
+
+/**
+ * struct pl022_ssp_master - device.platform_data for SPI controller devices.
+ * @num_chipselect: chipselects are used to distinguish individual
+ * SPI slaves, and are numbered from zero to num_chipselects - 1.
+ * each slave has a chipselect signal, but it's common that not
+ * every chipselect is connected to a slave.
+ * @enable_dma: if true enables DMA driven transfers.
+ */
+struct pl022_ssp_controller {
+ u16 bus_id;
+ u8 num_chipselect;
+ u8 enable_dma:1;
+};
+
+/**
+ * struct ssp_config_chip - spi_board_info.controller_data for SPI
+ * slave devices, copied to spi_device.controller_data.
+ *
+ * @lbm: used for test purpose to internally connect RX and TX
+ * @iface: Interface type(Motorola, TI, Microwire, Universal)
+ * @hierarchy: sets whether interface is master or slave
+ * @slave_tx_disable: SSPTXD is disconnected (in slave mode only)
+ * @clk_freq: Tune freq parameters of SSP(when in master mode)
+ * @endian_rx: Endianess of Data in Rx FIFO
+ * @endian_tx: Endianess of Data in Tx FIFO
+ * @data_size: Width of data element(4 to 32 bits)
+ * @com_mode: communication mode: polling, Interrupt or DMA
+ * @rx_lev_trig: Rx FIFO watermark level (for IT & DMA mode)
+ * @tx_lev_trig: Tx FIFO watermark level (for IT & DMA mode)
+ * @clk_phase: Motorola SPI interface Clock phase
+ * @clk_pol: Motorola SPI interface Clock polarity
+ * @ctrl_len: Microwire interface: Control length
+ * @wait_state: Microwire interface: Wait state
+ * @duplex: Microwire interface: Full/Half duplex
+ * @cs_control: function pointer to board-specific function to
+ * assert/deassert I/O port to control HW generation of devices chip-select.
+ * @dma_xfer_type: Type of DMA xfer (Mem-to-periph or Periph-to-Periph)
+ * @dma_config: DMA configuration for SSP controller and peripheral
+ */
+struct pl022_config_chip {
+ struct device *dev;
+ enum ssp_loopback lbm;
+ enum ssp_interface iface;
+ enum ssp_hierarchy hierarchy;
+ bool slave_tx_disable;
+ struct ssp_clock_params clk_freq;
+ enum ssp_rx_endian endian_rx;
+ enum ssp_tx_endian endian_tx;
+ enum ssp_data_size data_size;
+ enum ssp_mode com_mode;
+ enum ssp_rx_level_trig rx_lev_trig;
+ enum ssp_tx_level_trig tx_lev_trig;
+ enum ssp_spi_clk_phase clk_phase;
+ enum ssp_spi_clk_pol clk_pol;
+ enum ssp_microwire_ctrl_len ctrl_len;
+ enum ssp_microwire_wait_state wait_state;
+ enum ssp_duplex duplex;
+ void (*cs_control) (u32 control);
+};
+
+#endif /* _SSP_PL022_H */
#define UART011_IFLS_TX4_8 (2 << 0)
#define UART011_IFLS_TX6_8 (3 << 0)
#define UART011_IFLS_TX7_8 (4 << 0)
+/* special values for ST vendor with deeper fifo */
+#define UART011_IFLS_RX_HALF (5 << 3)
+#define UART011_IFLS_TX_HALF (5 << 0)
#define UART011_OEIM (1 << 10) /* overrun error interrupt mask */
#define UART011_BEIM (1 << 9) /* break error interrupt mask */
#ifndef _LINUX_AUTO_FS_H
#define _LINUX_AUTO_FS_H
+#include <linux/types.h>
#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/limits.h>
-#include <linux/types.h>
#include <linux/ioctl.h>
#else
-#include <asm/types.h>
#include <sys/ioctl.h>
#endif /* __KERNEL__ */
*/
struct clk *clk_get_sys(const char *dev_id, const char *con_id);
+/**
+ * clk_add_alias - add a new clock alias
+ * @alias: name for clock alias
+ * @alias_dev_name: device name
+ * @id: platform specific clock name
+ * @dev: device
+ *
+ * Allows using generic clock names for drivers by adding a new alias.
+ * Assumes clkdev, see clkdev.h for more info.
+ */
+int clk_add_alias(const char *alias, const char *alias_dev_name, char *id,
+ struct device *dev);
+
#endif
#define _LINUX_CRED_H
#include <linux/capability.h>
+#include <linux/init.h>
#include <linux/key.h>
#include <asm/atomic.h>
struct fbd_ioat {
unsigned int vendor;
unsigned int ioat_dev;
+ unsigned int enabled;
};
/*
* The i5000 chip-set has the same hooks as the i7300
- * but support is disabled by default because this driver
- * has not been validated on that platform.
+ * but it is not enabled by default and must be manually
+ * manually enabled with "forceload=1" because it is
+ * only lightly validated.
*/
-#define SUPPORT_I5000 0
static const struct fbd_ioat fbd_ioat_list[] = {
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
-#if SUPPORT_I5000
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
-#endif
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0},
{0, 0}
};
/* table of devices that work with this driver */
static const struct pci_device_id pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
-#if SUPPORT_I5000
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
-#endif
{ } /* Terminating entry */
};
/* Check for known platforms with I/O-AT */
static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
- struct pci_dev **ioat_dev)
+ struct pci_dev **ioat_dev,
+ int enable_all)
{
int i;
struct pci_dev *memdev, *dmadev;
for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
if (dmadev->vendor == fbd_ioat_list[i].vendor &&
dmadev->device == fbd_ioat_list[i].ioat_dev) {
+ if (!(fbd_ioat_list[i].enabled || enable_all))
+ continue;
if (fbd_dev)
*fbd_dev = memdev;
if (ioat_dev)
#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
#ifndef __NET_DROPMON_H
#define __NET_DROPMON_H
+#include <linux/types.h>
#include <linux/netlink.h>
struct net_dm_drop_point {
/* Has unacknowledged data */
#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED 0x10
+/* The field td_maxack has been set */
+#define IP_CT_TCP_FLAG_MAXACK_SET 0x20
+
struct nf_ct_tcp_flags {
__u8 flags;
__u8 mask;
u_int32_t td_end; /* max of seq + len */
u_int32_t td_maxend; /* max of ack + max(win, 1) */
u_int32_t td_maxwin; /* max(win) */
+ u_int32_t td_maxack; /* max of ack */
u_int8_t td_scale; /* window scale factor */
u_int8_t flags; /* per direction options */
};
int spintime;
atomic_t ref_count;
+ unsigned long devflags;
+#define PARPORT_DEVPROC_REGISTERED 0
+ struct pardevice *proc_device; /* Currently register proc device */
+
struct list_head full_list;
struct parport *slaves[3];
};
return 0;
}
+static inline void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
+{
+}
+
#endif /* CONFIG_SWAP */
#endif /* __KERNEL__*/
#endif /* _LINUX_SWAP_H */
tick_init();
boot_cpu_init();
page_address_init();
- printk(KERN_NOTICE);
- printk(linux_banner);
+ printk(KERN_NOTICE "%s", linux_banner);
setup_arch(&command_line);
mm_init_owner(&init_mm, &init_task);
setup_command_line(command_line);
static async_cookie_t __lowest_in_progress(struct list_head *running)
{
struct async_entry *entry;
+ async_cookie_t ret = next_cookie; /* begin with "infinity" value */
+
if (!list_empty(running)) {
entry = list_first_entry(running,
struct async_entry, list);
- return entry->cookie;
- } else if (!list_empty(&async_pending)) {
- entry = list_first_entry(&async_pending,
- struct async_entry, list);
- return entry->cookie;
- } else {
- /* nothing in progress... next_cookie is "infinity" */
- return next_cookie;
+ ret = entry->cookie;
}
+ if (!list_empty(&async_pending)) {
+ list_for_each_entry(entry, &async_pending, list)
+ if (entry->running == running) {
+ ret = entry->cookie;
+ break;
+ }
+ }
+
+ return ret;
}
static async_cookie_t lowest_in_progress(struct list_head *running)
error = device_suspend(PMSG_FREEZE);
if (error)
goto Resume_console;
- device_pm_lock();
/* At this point, device_suspend() has been called,
* but *not* device_power_down(). We *must*
* device_power_down() now. Otherwise, drivers for
enable_nonboot_cpus();
device_power_up(PMSG_RESTORE);
Resume_devices:
- device_pm_unlock();
device_resume(PMSG_RESTORE);
Resume_console:
resume_console();
sub_info->argv = argv;
sub_info->envp = envp;
sub_info->cred = prepare_usermodehelper_creds();
- if (!sub_info->cred)
+ if (!sub_info->cred) {
+ kfree(sub_info);
return NULL;
+ }
out:
return sub_info;
if (error)
return error;
- device_pm_lock();
-
/* At this point, device_suspend() has been called, but *not*
* device_power_down(). We *must* call device_power_down() now.
* Otherwise, drivers for some devices (e.g. interrupt controllers)
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting hibernation\n");
- goto Unlock;
+ return error;
}
error = platform_pre_snapshot(platform_mode);
device_power_up(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
- Unlock:
- device_pm_unlock();
-
return error;
}
{
int error;
- device_pm_lock();
-
error = device_power_down(PMSG_QUIESCE);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down, "
"aborting resume\n");
- goto Unlock;
+ return error;
}
error = platform_pre_restore(platform_mode);
device_power_up(PMSG_RECOVER);
- Unlock:
- device_pm_unlock();
-
return error;
}
goto Resume_devices;
}
- device_pm_lock();
-
error = device_power_down(PMSG_HIBERNATE);
if (error)
- goto Unlock;
+ goto Resume_devices;
error = hibernation_ops->prepare();
if (error)
device_power_up(PMSG_RESTORE);
- Unlock:
- device_pm_unlock();
-
Resume_devices:
entering_platform_hibernation = false;
device_resume(PMSG_RESTORE);
{
int error;
- device_pm_lock();
-
if (suspend_ops->prepare) {
error = suspend_ops->prepare();
if (error)
- goto Done;
+ return error;
}
error = device_power_down(PMSG_SUSPEND);
if (suspend_ops->finish)
suspend_ops->finish();
- Done:
- device_pm_unlock();
-
return error;
}
mapping->nrpages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
BUG_ON(page_mapped(page));
- mem_cgroup_uncharge_cache_page(page);
/*
* Some filesystems seem to re-dirty the page even after
spin_lock_irq(&mapping->tree_lock);
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
}
static int sync_page(void *word)
if (likely(!error)) {
mapping->nrpages++;
__inc_zone_page_state(page, NR_FILE_PAGES);
+ spin_unlock_irq(&mapping->tree_lock);
} else {
page->mapping = NULL;
+ spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
page_cache_release(page);
}
-
- spin_unlock_irq(&mapping->tree_lock);
radix_tree_preload_end();
} else
mem_cgroup_uncharge_cache_page(page);
static struct resv_map *vma_resv_map(struct vm_area_struct *vma)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
return (struct resv_map *)(get_vma_private_data(vma) &
~HPAGE_RESV_MASK);
return NULL;
static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- VM_BUG_ON(vma->vm_flags & VM_SHARED);
+ VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
set_vma_private_data(vma, (get_vma_private_data(vma) &
HPAGE_RESV_MASK) | (unsigned long)map);
static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- VM_BUG_ON(vma->vm_flags & VM_SHARED);
+ VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
set_vma_private_data(vma, get_vma_private_data(vma) | flags);
}
if (vma->vm_flags & VM_NORESERVE)
return;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
/* Shared mappings always use reserves */
h->resv_huge_pages--;
} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
vma->vm_private_data = (void *)0;
}
/* Returns true if the VMA has associated reserve pages */
static int vma_has_reserves(struct vm_area_struct *vma)
{
- if (vma->vm_flags & VM_SHARED)
+ if (vma->vm_flags & VM_MAYSHARE)
return 1;
if (is_vma_resv_set(vma, HPAGE_RESV_OWNER))
return 1;
struct address_space *mapping = vma->vm_file->f_mapping;
struct inode *inode = mapping->host;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
pgoff_t idx = vma_hugecache_offset(h, vma, addr);
return region_chg(&inode->i_mapping->private_list,
idx, idx + 1);
struct address_space *mapping = vma->vm_file->f_mapping;
struct inode *inode = mapping->host;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
pgoff_t idx = vma_hugecache_offset(h, vma, addr);
region_add(&inode->i_mapping->private_list, idx, idx + 1);
* at the time of fork() could consume its reserves on COW instead
* of the full address range.
*/
- if (!(vma->vm_flags & VM_SHARED) &&
+ if (!(vma->vm_flags & VM_MAYSHARE) &&
is_vma_resv_set(vma, HPAGE_RESV_OWNER) &&
old_page != pagecache_page)
outside_reserve = 1;
clear_huge_page(page, address, huge_page_size(h));
__SetPageUptodate(page);
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
int err;
struct inode *inode = mapping->host;
goto out_mutex;
}
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
pagecache_page = hugetlbfs_pagecache_page(h,
vma, address);
}
* to reserve the full area even if read-only as mprotect() may be
* called to make the mapping read-write. Assume !vma is a shm mapping
*/
- if (!vma || vma->vm_flags & VM_SHARED)
+ if (!vma || vma->vm_flags & VM_MAYSHARE)
chg = region_chg(&inode->i_mapping->private_list, from, to);
else {
struct resv_map *resv_map = resv_map_alloc();
* consumed reservations are stored in the map. Hence, nothing
* else has to be done for private mappings here
*/
- if (!vma || vma->vm_flags & VM_SHARED)
+ if (!vma || vma->vm_flags & VM_MAYSHARE)
region_add(&inode->i_mapping->private_list, from, to);
return 0;
}
return mem;
}
-static bool mem_cgroup_is_obsolete(struct mem_cgroup *mem)
-{
- if (!mem)
- return true;
- return css_is_removed(&mem->css);
-}
-
-
/*
* Call callback function against all cgroup under hierarchy tree.
*/
if (unlikely(!mem))
return 0;
- VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem));
+ VM_BUG_ON(css_is_removed(&mem->css));
while (1) {
int ret;
__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE);
}
+#ifdef CONFIG_SWAP
/*
- * called from __delete_from_swap_cache() and drop "page" account.
+ * called after __delete_from_swap_cache() and drop "page" account.
* memcg information is recorded to swap_cgroup of "ent"
*/
void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
if (memcg)
css_put(&memcg->css);
}
+#endif
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
/*
printk(KERN_INFO "[ pid ] uid tgid total_vm rss cpu oom_adj "
"name\n");
do_each_thread(g, p) {
- /*
- * total_vm and rss sizes do not exist for tasks with a
- * detached mm so there's no need to report them.
- */
- if (!p->mm)
- continue;
+ struct mm_struct *mm;
+
if (mem && !task_in_mem_cgroup(p, mem))
continue;
if (!thread_group_leader(p))
continue;
task_lock(p);
+ mm = p->mm;
+ if (!mm) {
+ /*
+ * total_vm and rss sizes do not exist for tasks with no
+ * mm so there's no need to report them; they can't be
+ * oom killed anyway.
+ */
+ task_unlock(p);
+ continue;
+ }
printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n",
- p->pid, __task_cred(p)->uid, p->tgid,
- p->mm->total_vm, get_mm_rss(p->mm), (int)task_cpu(p),
- p->oomkilladj, p->comm);
+ p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
+ get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
+ p->comm);
task_unlock(p);
} while_each_thread(g, p);
}
*/
void __delete_from_swap_cache(struct page *page)
{
- swp_entry_t ent = {.val = page_private(page)};
-
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(!PageSwapCache(page));
VM_BUG_ON(PageWriteback(page));
total_swapcache_pages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
INC_CACHE_INFO(del_total);
- mem_cgroup_uncharge_swapcache(page, ent);
}
/**
__delete_from_swap_cache(page);
spin_unlock_irq(&swapper_space.tree_lock);
+ mem_cgroup_uncharge_swapcache(page, entry);
swap_free(entry);
page_cache_release(page);
}
BUG_ON(page_has_private(page));
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
page_cache_release(page); /* pagecache ref */
return 1;
failed:
swp_entry_t swap = { .val = page_private(page) };
__delete_from_swap_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_swapcache(page, swap);
swap_free(swap);
} else {
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
}
return 1;
struct hci_conn *conn = container_of(work, struct hci_conn, work_add);
struct hci_dev *hdev = conn->hdev;
- /* ensure previous del is complete */
- flush_work(&conn->work_del);
-
dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
if (device_add(&conn->dev) < 0) {
struct hci_conn *conn = container_of(work, struct hci_conn, work_del);
struct hci_dev *hdev = conn->hdev;
- /* ensure previous add is complete */
- flush_work(&conn->work_add);
-
if (!device_is_registered(&conn->dev))
return;
if (pkt_dev->cflows) {
/* let go of the SAs if we have them */
int i = 0;
- for (; i < pkt_dev->nflows; i++){
+ for (; i < pkt_dev->cflows; i++) {
struct xfrm_state *x = pkt_dev->flows[i].x;
if (x) {
xfrm_state_put(x);
static struct node *trie_rebalance(struct trie *t, struct tnode *tn)
{
int wasfull;
- t_key cindex, key = tn->key;
+ t_key cindex, key;
struct tnode *tp;
+ preempt_disable();
+ key = tn->key;
+
while (tn != NULL && (tp = node_parent((struct node *)tn)) != NULL) {
cindex = tkey_extract_bits(key, tp->pos, tp->bits);
wasfull = tnode_full(tp, tnode_get_child(tp, cindex));
if (IS_TNODE(tn))
tn = (struct tnode *)resize(t, (struct tnode *)tn);
+ preempt_enable();
return (struct node *)tn;
}
{
static unsigned int rover;
unsigned int i = rover, goal;
- struct rtable *rth, **rthp;
- unsigned long length = 0, samples = 0;
+ struct rtable *rth, *aux, **rthp;
+ unsigned long samples = 0;
unsigned long sum = 0, sum2 = 0;
u64 mult;
goal = (unsigned int)mult;
if (goal > rt_hash_mask)
goal = rt_hash_mask + 1;
- length = 0;
for (; goal > 0; goal--) {
unsigned long tmo = ip_rt_gc_timeout;
+ unsigned long length;
i = (i + 1) & rt_hash_mask;
rthp = &rt_hash_table[i].chain;
if (*rthp == NULL)
continue;
+ length = 0;
spin_lock_bh(rt_hash_lock_addr(i));
while ((rth = *rthp) != NULL) {
+ prefetch(rth->u.dst.rt_next);
if (rt_is_expired(rth)) {
*rthp = rth->u.dst.rt_next;
rt_free(rth);
if (rth->u.dst.expires) {
/* Entry is expired even if it is in use */
if (time_before_eq(jiffies, rth->u.dst.expires)) {
+nofree:
tmo >>= 1;
rthp = &rth->u.dst.rt_next;
/*
- * Only bump our length if the hash
- * inputs on entries n and n+1 are not
- * the same, we only count entries on
+ * We only count entries on
* a chain with equal hash inputs once
* so that entries for different QOS
* levels, and other non-hash input
* attributes don't unfairly skew
* the length computation
*/
- if ((*rthp == NULL) ||
- !compare_hash_inputs(&(*rthp)->fl,
- &rth->fl))
- length += ONE;
+ for (aux = rt_hash_table[i].chain;;) {
+ if (aux == rth) {
+ length += ONE;
+ break;
+ }
+ if (compare_hash_inputs(&aux->fl, &rth->fl))
+ break;
+ aux = aux->u.dst.rt_next;
+ }
continue;
}
- } else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout)) {
- tmo >>= 1;
- rthp = &rth->u.dst.rt_next;
- if ((*rthp == NULL) ||
- !compare_hash_inputs(&(*rthp)->fl,
- &rth->fl))
- length += ONE;
- continue;
- }
+ } else if (!rt_may_expire(rth, tmo, ip_rt_gc_timeout))
+ goto nofree;
/* Cleanup aged off entries. */
*rthp = rth->u.dst.rt_next;
static int rt_intern_hash(unsigned hash, struct rtable *rt, struct rtable **rp)
{
struct rtable *rth, **rthp;
- struct rtable *rthi;
unsigned long now;
struct rtable *cand, **candp;
u32 min_score;
}
rthp = &rt_hash_table[hash].chain;
- rthi = NULL;
spin_lock_bh(rt_hash_lock_addr(hash));
while ((rth = *rthp) != NULL) {
chain_length++;
rthp = &rth->u.dst.rt_next;
-
- /*
- * check to see if the next entry in the chain
- * contains the same hash input values as rt. If it does
- * This is where we will insert into the list, instead of
- * at the head. This groups entries that differ by aspects not
- * relvant to the hash function together, which we use to adjust
- * our chain length
- */
- if (*rthp && compare_hash_inputs(&(*rthp)->fl, &rt->fl))
- rthi = rth;
}
if (cand) {
}
}
- if (rthi)
- rt->u.dst.rt_next = rthi->u.dst.rt_next;
- else
- rt->u.dst.rt_next = rt_hash_table[hash].chain;
+ rt->u.dst.rt_next = rt_hash_table[hash].chain;
#if RT_CACHE_DEBUG >= 2
if (rt->u.dst.rt_next) {
* previous writes to rt are comitted to memory
* before making rt visible to other CPUS.
*/
- if (rthi)
- rcu_assign_pointer(rthi->u.dst.rt_next, rt);
- else
- rcu_assign_pointer(rt_hash_table[hash].chain, rt);
+ rcu_assign_pointer(rt_hash_table[hash].chain, rt);
spin_unlock_bh(rt_hash_lock_addr(hash));
*rp = rt;
}
EXPORT_SYMBOL_GPL(tcp_vegas_cwnd_event);
+static inline u32 tcp_vegas_ssthresh(struct tcp_sock *tp)
+{
+ return min(tp->snd_ssthresh, tp->snd_cwnd-1);
+}
+
static void tcp_vegas_cong_avoid(struct sock *sk, u32 ack, u32 in_flight)
{
struct tcp_sock *tp = tcp_sk(sk);
*/
diff = tp->snd_cwnd * (rtt-vegas->baseRTT) / vegas->baseRTT;
- if (diff > gamma && tp->snd_ssthresh > 2 ) {
+ if (diff > gamma && tp->snd_cwnd <= tp->snd_ssthresh) {
/* Going too fast. Time to slow down
* and switch to congestion avoidance.
*/
- tp->snd_ssthresh = 2;
/* Set cwnd to match the actual rate
* exactly:
* utilization.
*/
tp->snd_cwnd = min(tp->snd_cwnd, (u32)target_cwnd+1);
+ tp->snd_ssthresh = tcp_vegas_ssthresh(tp);
} else if (tp->snd_cwnd <= tp->snd_ssthresh) {
/* Slow start. */
* we slow down.
*/
tp->snd_cwnd--;
+ tp->snd_ssthresh
+ = tcp_vegas_ssthresh(tp);
} else if (diff < alpha) {
/* We don't have enough extra packets
* in the network, so speed up.
}
},
.rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
+ .rt6i_protocol = RTPROT_KERNEL,
.rt6i_metric = ~(u32) 0,
.rt6i_ref = ATOMIC_INIT(1),
};
}
},
.rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
+ .rt6i_protocol = RTPROT_KERNEL,
.rt6i_metric = ~(u32) 0,
.rt6i_ref = ATOMIC_INIT(1),
};
}
},
.rt6i_flags = (RTF_REJECT | RTF_NONEXTHOP),
+ .rt6i_protocol = RTPROT_KERNEL,
.rt6i_metric = ~(u32) 0,
.rt6i_ref = ATOMIC_INIT(1),
};
#include <linux/netfilter/nfnetlink_conntrack.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_l4proto.h>
+#include <net/netfilter/nf_conntrack_ecache.h>
#include <net/netfilter/nf_log.h>
static DEFINE_RWLOCK(dccp_lock);
ct->proto.dccp.state = new_state;
write_unlock_bh(&dccp_lock);
+ if (new_state != old_state)
+ nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
+
dn = dccp_pernet(net);
nf_ct_refresh_acct(ct, ctinfo, skb, dn->dccp_timeout[new_state]);
sender->td_end = end;
sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
}
+ if (tcph->ack) {
+ if (!(sender->flags & IP_CT_TCP_FLAG_MAXACK_SET)) {
+ sender->td_maxack = ack;
+ sender->flags |= IP_CT_TCP_FLAG_MAXACK_SET;
+ } else if (after(ack, sender->td_maxack))
+ sender->td_maxack = ack;
+ }
+
/*
* Update receiver data.
*/
"nf_ct_tcp: invalid state ");
return -NF_ACCEPT;
case TCP_CONNTRACK_CLOSE:
+ if (index == TCP_RST_SET
+ && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET)
+ && before(ntohl(th->seq), ct->proto.tcp.seen[!dir].td_maxack)) {
+ /* Invalid RST */
+ write_unlock_bh(&tcp_lock);
+ if (LOG_INVALID(net, IPPROTO_TCP))
+ nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
+ "nf_ct_tcp: invalid RST ");
+ return -NF_ACCEPT;
+ }
if (index == TCP_RST_SET
&& ((test_bit(IPS_SEEN_REPLY_BIT, &ct->status)
&& ct->proto.tcp.last_index == TCP_SYN_SET)
+ nla_total_size(sizeof(struct nfulnl_msg_packet_hw))
+ nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp));
+ if (in && skb_mac_header_was_set(skb)) {
+ size += nla_total_size(skb->dev->hard_header_len)
+ + nla_total_size(sizeof(u_int16_t)) /* hwtype */
+ + nla_total_size(sizeof(u_int16_t)); /* hwlen */
+ }
+
spin_lock_bh(&inst->lock);
if (inst->flags & NFULNL_CFG_F_SEQ)
if (!hlist_empty(&htable->hash[*bucket])) {
hlist_for_each_entry(ent, pos, &htable->hash[*bucket], node)
if (dl_seq_real_show(ent, htable->family, s))
- return 1;
+ return -1;
}
return 0;
}
/* not yet present - create a candidate for a new connection
* and then redo the check */
conn = rxrpc_alloc_connection(gfp);
- if (IS_ERR(conn)) {
- _leave(" = %ld", PTR_ERR(conn));
- return PTR_ERR(conn);
+ if (!conn) {
+ _leave(" = -ENOMEM");
+ return -ENOMEM;
}
conn->trans = trans;
/* not yet present - create a candidate for a new connection and then
* redo the check */
candidate = rxrpc_alloc_connection(gfp);
- if (IS_ERR(candidate)) {
- _leave(" = %ld", PTR_ERR(candidate));
- return PTR_ERR(candidate);
+ if (!candidate) {
+ _leave(" = -ENOMEM");
+ return -ENOMEM;
}
candidate->trans = trans;
unsigned long cl;
unsigned long fh;
int err;
+ int tp_created = 0;
if (net != &init_net)
return -EINVAL;
goto errout;
}
- spin_lock_bh(root_lock);
- tp->next = *back;
- *back = tp;
- spin_unlock_bh(root_lock);
+ tp_created = 1;
} else if (tca[TCA_KIND] && nla_strcmp(tca[TCA_KIND], tp->ops->kind))
goto errout;
switch (n->nlmsg_type) {
case RTM_NEWTFILTER:
err = -EEXIST;
- if (n->nlmsg_flags & NLM_F_EXCL)
+ if (n->nlmsg_flags & NLM_F_EXCL) {
+ if (tp_created)
+ tcf_destroy(tp);
goto errout;
+ }
break;
case RTM_DELTFILTER:
err = tp->ops->delete(tp, fh);
}
err = tp->ops->change(tp, cl, t->tcm_handle, tca, &fh);
- if (err == 0)
+ if (err == 0) {
+ if (tp_created) {
+ spin_lock_bh(root_lock);
+ tp->next = *back;
+ *back = tp;
+ spin_unlock_bh(root_lock);
+ }
tfilter_notify(skb, n, tp, fh, RTM_NEWTFILTER);
+ } else {
+ if (tp_created)
+ tcf_destroy(tp);
+ }
errout:
if (cl)
struct tcf_result *res)
{
struct cls_cgroup_head *head = tp->root;
- struct cgroup_cls_state *cs;
- int ret = 0;
+ u32 classid;
/*
* Due to the nature of the classifier it is required to ignore all
return -1;
rcu_read_lock();
- cs = task_cls_state(current);
- if (cs->classid && tcf_em_tree_match(skb, &head->ematches, NULL)) {
- res->classid = cs->classid;
- res->class = 0;
- ret = tcf_exts_exec(skb, &head->exts, res);
- } else
- ret = -1;
-
+ classid = task_cls_state(current)->classid;
rcu_read_unlock();
- return ret;
+ if (!classid)
+ return -1;
+
+ if (!tcf_em_tree_match(skb, &head->ematches, NULL))
+ return -1;
+
+ res->classid = classid;
+ res->class = 0;
+ return tcf_exts_exec(skb, &head->exts, res);
}
static unsigned long cls_cgroup_get(struct tcf_proto *tp, u32 handle)
lock_sock(sock->sk);
sock->sk->sk_sndbuf = snd * 2;
sock->sk->sk_rcvbuf = rcv * 2;
+ sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK;
release_sock(sock->sk);
#endif
}
test_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags),
test_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags));
+ if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
+ /* sndbuf needs to have room for one request
+ * per thread, otherwise we can stall even when the
+ * network isn't a bottleneck.
+ *
+ * We count all threads rather than threads in a
+ * particular pool, which provides an upper bound
+ * on the number of threads which will access the socket.
+ *
+ * rcvbuf just needs to be able to hold a few requests.
+ * Normally they will be removed from the queue
+ * as soon a a complete request arrives.
+ */
+ svc_sock_setbufsize(svsk->sk_sock,
+ (serv->sv_nrthreads+3) * serv->sv_max_mesg,
+ 3 * serv->sv_max_mesg);
+
clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
/* Receive data. If we haven't got the record length yet, get
tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF;
+ /* initialise setting must have enough space to
+ * receive and respond to one request.
+ * svc_tcp_recvfrom will re-adjust if necessary
+ */
+ svc_sock_setbufsize(svsk->sk_sock,
+ 3 * svsk->sk_xprt.xpt_server->sv_max_mesg,
+ 3 * svsk->sk_xprt.xpt_server->sv_max_mesg);
+
+ set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
if (sk->sk_state != TCP_ESTABLISHED)
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
/* Initialize the socket */
if (sock->type == SOCK_DGRAM)
svc_udp_init(svsk, serv);
- else {
- /* initialise setting must have enough space to
- * receive and respond to one request.
- */
- svc_sock_setbufsize(svsk->sk_sock, 4 * serv->sv_max_mesg,
- 4 * serv->sv_max_mesg);
+ else
svc_tcp_init(svsk, serv);
- }
dprintk("svc: svc_setup_socket created %p (inet %p)\n",
svsk, svsk->sk_sk);
page_bytes -= sge_bytes;
frmr->page_list->page_list[page_no] =
- ib_dma_map_page(xprt->sc_cm_id->device, page, 0,
+ ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(page),
PAGE_SIZE, DMA_TO_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device,
frmr->page_list->page_list[page_no]))
clear_bit(RDMACTXT_F_FAST_UNREG, &ctxt->flags);
/* Prepare the SGE for the RPCRDMA Header */
+ ctxt->sge[0].lkey = rdma->sc_dma_lkey;
+ ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
ctxt->sge[0].addr =
- ib_dma_map_page(rdma->sc_cm_id->device,
- page, 0, PAGE_SIZE, DMA_TO_DEVICE);
+ ib_dma_map_single(rdma->sc_cm_id->device, page_address(page),
+ ctxt->sge[0].length, DMA_TO_DEVICE);
if (ib_dma_mapping_error(rdma->sc_cm_id->device, ctxt->sge[0].addr))
goto err;
atomic_inc(&rdma->sc_dma_used);
ctxt->direction = DMA_TO_DEVICE;
- ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
- ctxt->sge[0].lkey = rdma->sc_dma_lkey;
-
/* Determine how many of our SGE are to be transmitted */
for (sge_no = 1; byte_count && sge_no < vec->count; sge_no++) {
sge_bytes = min_t(size_t, vec->sge[sge_no].iov_len, byte_count);
BUG_ON(sge_no >= xprt->sc_max_sge);
page = svc_rdma_get_page();
ctxt->pages[sge_no] = page;
- pa = ib_dma_map_page(xprt->sc_cm_id->device,
- page, 0, PAGE_SIZE,
+ pa = ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(page), PAGE_SIZE,
DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device, pa))
goto err_put_ctxt;
length = svc_rdma_xdr_encode_error(xprt, rmsgp, err, va);
/* Prepare SGE for local address */
- sge.addr = ib_dma_map_page(xprt->sc_cm_id->device,
- p, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ sge.addr = ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(p), PAGE_SIZE, DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device, sge.addr)) {
put_page(p);
return;
if (ret) {
dprintk("svcrdma: Error %d posting send for protocol error\n",
ret);
- ib_dma_unmap_page(xprt->sc_cm_id->device,
+ ib_dma_unmap_single(xprt->sc_cm_id->device,
sge.addr, PAGE_SIZE,
DMA_FROM_DEVICE);
svc_rdma_put_context(ctxt, 1);
frmr_wr.wr.fast_reg.page_shift = PAGE_SHIFT;
frmr_wr.wr.fast_reg.length = i << PAGE_SHIFT;
frmr_wr.wr.fast_reg.access_flags = (writing ?
- IB_ACCESS_REMOTE_WRITE : IB_ACCESS_REMOTE_READ);
+ IB_ACCESS_REMOTE_WRITE | IB_ACCESS_LOCAL_WRITE :
+ IB_ACCESS_REMOTE_READ);
frmr_wr.wr.fast_reg.rkey = seg1->mr_chunk.rl_mw->r.frmr.fr_mr->rkey;
DECR_CQCOUNT(&r_xprt->rx_ep);
queue_regulatory_request(request);
+ /*
+ * This ensures last_request is populated once modules
+ * come swinging in and calling regulatory hints and
+ * wiphy_apply_custom_regulatory().
+ */
+ flush_scheduled_work();
+
return 0;
}
err = -EFAULT;
goto out;
}
+
+ if (cmd == SIOCSIWENCODEEXT) {
+ struct iw_encode_ext *ee = (void *) extra;
+
+ if (iwp->length < sizeof(*ee) + ee->key_len)
+ return -EFAULT;
+ }
}
err = handler(dev, info, (union iwreq_data *) iwp, extra);
static int tomoyo_bprm_set_creds(struct linux_binprm *bprm)
{
+ int rc;
+
+ rc = cap_bprm_set_creds(bprm);
+ if (rc)
+ return rc;
+
/*
* Do only if this function is called for the first time of an execve
* operation.
goto out;
}
- aaci->base = ioremap(dev->res.start, SZ_4K);
+ aaci->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!aaci->base) {
ret = -ENOMEM;
goto out;
new_hw_ptr = hw_base + pos;
}
}
+
+ /* Do jiffies check only in xrun_debug mode */
+ if (!xrun_debug(substream))
+ goto no_jiffies_check;
+
/* Skip the jiffies check for hardwares with BATCH flag.
* Such hardware usually just increases the position at each IRQ,
* thus it can't give any strange position.
hw_base = 0;
new_hw_ptr = hw_base + pos;
}
- if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
+ /* Do jiffies check only in xrun_debug mode */
+ if (xrun_debug(substream) &&
+ ((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
hw_ptr_error(substream,
"hw_ptr skipping! "
"(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
runtime->status->hw_ptr %= runtime->buffer_size;
else
runtime->status->hw_ptr = 0;
- runtime->hw_ptr_jiffies = jiffies;
snd_pcm_stream_unlock_irqrestore(substream, flags);
return 0;
}
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_trigger_tstamp(substream);
+ runtime->hw_ptr_jiffies = jiffies;
runtime->status->state = state;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
runtime->silence_size > 0)
{
if (substream->runtime->trigger_master != substream)
return 0;
+ /* The jiffies check in snd_pcm_update_hw_ptr*() is done by
+ * a delta betwen the current jiffies, this gives a large enough
+ * delta, effectively to skip the check once.
+ */
+ substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000;
return substream->ops->trigger(substream,
push ? SNDRV_PCM_TRIGGER_PAUSE_PUSH :
SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
/* forced codec slots */
+ SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103),
SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103),
{}
};
static struct snd_pci_quirk cxt5051_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6736", CXT5051_HP_DV6736),
+ SND_PCI_QUIRK(0x103c, 0x360b, "Compaq Presario CQ60", CXT5051_HP),
SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
CXT5051_LAPTOP),
SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP),
pincap = (pincap & AC_PINCAP_VREF) >> AC_PINCAP_VREF_SHIFT;
if (pincap & AC_PINCAP_VREF_80)
val = PIN_VREF80;
+ else if (pincap & AC_PINCAP_VREF_50)
+ val = PIN_VREF50;
+ else if (pincap & AC_PINCAP_VREF_100)
+ val = PIN_VREF100;
+ else if (pincap & AC_PINCAP_VREF_GRD)
+ val = PIN_VREFGRD;
}
snd_hda_codec_write(codec, nid, 0, AC_VERB_SET_PIN_WIDGET_CONTROL, val);
}
STAC_D965_REF,
STAC_D965_3ST,
STAC_D965_5ST,
+ STAC_D965_5ST_NO_FP,
STAC_DELL_3ST,
STAC_DELL_BIOS,
STAC_927X_MODELS
0x40000100, 0x40000100
};
+static unsigned int d965_5st_no_fp_pin_configs[14] = {
+ 0x40000100, 0x40000100, 0x0181304e, 0x01014010,
+ 0x01a19040, 0x01011012, 0x01016011, 0x40000100,
+ 0x40000100, 0x40000100, 0x40000100, 0x01442070,
+ 0x40000100, 0x40000100
+};
+
static unsigned int dell_3st_pin_configs[14] = {
0x02211230, 0x02a11220, 0x01a19040, 0x01114210,
0x01111212, 0x01116211, 0x01813050, 0x01112214,
[STAC_D965_REF] = ref927x_pin_configs,
[STAC_D965_3ST] = d965_3st_pin_configs,
[STAC_D965_5ST] = d965_5st_pin_configs,
+ [STAC_D965_5ST_NO_FP] = d965_5st_no_fp_pin_configs,
[STAC_DELL_3ST] = dell_3st_pin_configs,
[STAC_DELL_BIOS] = NULL,
};
[STAC_D965_REF] = "ref",
[STAC_D965_3ST] = "3stack",
[STAC_D965_5ST] = "5stack",
+ [STAC_D965_5ST_NO_FP] = "5stack-no-fp",
[STAC_DELL_3ST] = "dell-3stack",
[STAC_DELL_BIOS] = "dell-bios",
};
#include <linux/module.h>
#include <linux/device.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/io.h>
#include <linux/io.h>
#include <linux/wait.h>
#include <linux/delay.h>
+#include <linux/gpio.h>
#include <linux/clk.h>
#include <sound/core.h>
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/io.h>
+#include <linux/gpio.h>
+
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
* sync to pclk, half-word transfers to the IIS-FIFO. */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
s3c2410_dma_devconfig(prtd->params->channel,
- S3C2410_DMASRC_MEM, S3C2410_DISRCC_INC |
- S3C2410_DISRCC_APB, prtd->params->dma_addr);
-
- s3c2410_dma_config(prtd->params->channel,
- prtd->params->dma_size,
- S3C2410_DCON_SYNC_PCLK |
- S3C2410_DCON_HANDSHAKE);
+ S3C2410_DMASRC_MEM,
+ prtd->params->dma_addr);
} else {
- s3c2410_dma_config(prtd->params->channel,
- prtd->params->dma_size,
- S3C2410_DCON_HANDSHAKE |
- S3C2410_DCON_SYNC_PCLK);
-
s3c2410_dma_devconfig(prtd->params->channel,
- S3C2410_DMASRC_HW, 0x3,
- prtd->params->dma_addr);
+ S3C2410_DMASRC_HW,
+ prtd->params->dma_addr);
}
+ s3c2410_dma_config(prtd->params->channel,
+ prtd->params->dma_size);
+
/* flush the DMA channel */
s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH);
prtd->dma_loaded = 0;
[QUIRK_MIDI_YAMAHA] = snd_usb_create_midi_interface,
[QUIRK_MIDI_MIDIMAN] = snd_usb_create_midi_interface,
[QUIRK_MIDI_NOVATION] = snd_usb_create_midi_interface,
- [QUIRK_MIDI_RAW] = snd_usb_create_midi_interface,
+ [QUIRK_MIDI_FASTLANE] = snd_usb_create_midi_interface,
[QUIRK_MIDI_EMAGIC] = snd_usb_create_midi_interface,
[QUIRK_MIDI_CME] = snd_usb_create_midi_interface,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
QUIRK_MIDI_YAMAHA,
QUIRK_MIDI_MIDIMAN,
QUIRK_MIDI_NOVATION,
- QUIRK_MIDI_RAW,
+ QUIRK_MIDI_FASTLANE,
QUIRK_MIDI_EMAGIC,
QUIRK_MIDI_CME,
QUIRK_MIDI_US122L,
umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
- case QUIRK_MIDI_RAW:
+ case QUIRK_MIDI_FASTLANE:
umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
+ /*
+ * Interface 1 contains isochronous endpoints, but with the same
+ * numbers as in interface 0. Since it is interface 1 that the
+ * USB core has most recently seen, these descriptors are now
+ * associated with the endpoint numbers. This will foul up our
+ * attempts to submit bulk/interrupt URBs to the endpoints in
+ * interface 0, so we have to make sure that the USB core looks
+ * again at interface 0 by calling usb_set_interface() on it.
+ */
+ usb_set_interface(umidi->chip->dev, 0, 0);
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
case QUIRK_MIDI_EMAGIC:
.data = & (const struct snd_usb_audio_quirk[]) {
{
.ifnum = 0,
- .type = QUIRK_MIDI_RAW
+ .type = QUIRK_MIDI_FASTLANE
},
{
.ifnum = 1,
git.samba.org / sfrench / cifs-2.6.git / commitdiff