struct i2c_adapter *demod_sub_i2c;
struct i2c_client *i2c_client_demod;
struct i2c_client *i2c_client_tuner;
- struct i2c_adapter tuner_adap;
};
#define CMD_WRITE_SHORT 0x01
return ret;
}
+static int gl861_short_write(struct dvb_usb_device *d, u8 addr, u8 reg, u8 val)
+{
+ return gl861_ctrl_msg(d, CMD_WRITE_SHORT,
+ (addr << 9) | val, reg, NULL, 0);
+}
+
static int gl861_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
int num)
{
.functionality = gl861_i2c_functionality,
};
-static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr,
- u8 *wbuf, u16 wlen, u8 *rbuf, u16 rlen)
-{
- u16 index;
- u16 value = addr << (8 + 1);
- int wo = (rbuf == NULL || rlen == 0); /* write-only */
- u8 req, type;
- u8 *buf;
- int ret;
-
- if (wo) {
- req = GL861_REQ_I2C_WRITE;
- type = GL861_WRITE;
- buf = kmemdup(wbuf, wlen, GFP_KERNEL);
- } else { /* rw */
- req = GL861_REQ_I2C_READ;
- type = GL861_READ;
- buf = kmalloc(rlen, GFP_KERNEL);
- }
- if (!buf)
- return -ENOMEM;
-
- switch (wlen) {
- case 1:
- index = wbuf[0];
- break;
- case 2:
- index = wbuf[0];
- value = value + wbuf[1];
- break;
- default:
- dev_err(&d->udev->dev, "%s: wlen=%d, aborting\n",
- KBUILD_MODNAME, wlen);
- kfree(buf);
- return -EINVAL;
- }
-
- usleep_range(1000, 2000); /* avoid I2C errors */
-
- ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type,
- value, index, buf, rlen, 2000);
-
- if (!wo && ret > 0)
- memcpy(rbuf, buf, rlen);
-
- kfree(buf);
- return ret;
-}
-
/* Callbacks for DVB USB */
static struct zl10353_config gl861_zl10353_config = {
.demod_address = 0x0f,
.tuner_info = { I2C_BOARD_INFO("tua6034_friio", 0x60), },
};
-/* For another type of I2C:
- * message sent by a USB control-read/write transaction with data stage.
- * Used in init/config of Friio.
- */
-static int
-gl861_i2c_write_ex(struct dvb_usb_device *d, u8 addr, u8 *wbuf, u16 wlen)
-{
- u8 *buf;
- int ret;
-
- buf = kmemdup(wbuf, wlen, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
- GL861_REQ_I2C_RAW, GL861_WRITE,
- addr << (8 + 1), 0x0100, buf, wlen, 2000);
- kfree(buf);
- return ret;
-}
-
-static int
-gl861_i2c_read_ex(struct dvb_usb_device *d, u8 addr, u8 *rbuf, u16 rlen)
-{
- u8 *buf;
- int ret;
-
- buf = kmalloc(rlen, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- ret = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
- GL861_REQ_I2C_READ, GL861_READ,
- addr << (8 + 1), 0x0100, buf, rlen, 2000);
- if (ret > 0 && rlen > 0)
- memcpy(buf, rbuf, rlen);
- kfree(buf);
- return ret;
-}
-
-/* For I2C transactions to the tuner of Friio (dvb_pll).
- *
- * Friio uses irregular USB encapsulation for tuner i2c transactions:
- * write transacions are encapsulated with a different USB 'request' value.
- *
- * Although all transactions are sent via the demod(tc90522)
- * and the demod provides an i2c adapter for them, it cannot be used in Friio
- * since it assumes using the same parent adapter with the demod,
- * which does not use the request value and uses same one for both read/write.
- * So we define a dedicated i2c adapter here.
- */
-
-static int
-friio_i2c_tuner_read(struct dvb_usb_device *d, struct i2c_msg *msg)
-{
- struct gl861 *priv;
- u8 addr;
-
- priv = d_to_priv(d);
- addr = priv->i2c_client_demod->addr;
- return gl861_i2c_read_ex(d, addr, msg->buf, msg->len);
-}
-
-static int
-friio_i2c_tuner_write(struct dvb_usb_device *d, struct i2c_msg *msg)
-{
- u8 *buf;
- int ret;
- struct gl861 *priv;
-
- priv = d_to_priv(d);
-
- if (msg->len < 1)
- return -EINVAL;
-
- buf = kmalloc(msg->len + 1, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- buf[0] = msg->addr << 1;
- memcpy(buf + 1, msg->buf, msg->len);
-
- ret = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev, 0),
- GL861_REQ_I2C_RAW, GL861_WRITE,
- priv->i2c_client_demod->addr << (8 + 1),
- 0xFE, buf, msg->len + 1, 2000);
- kfree(buf);
- return ret;
-}
-
-static int friio_tuner_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
- int num)
-{
- struct dvb_usb_device *d = i2c_get_adapdata(adap);
- int i;
-
- if (num > 2)
- return -EINVAL;
-
- if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
- return -EAGAIN;
-
- for (i = 0; i < num; i++) {
- int ret;
-
- if (msg[i].flags & I2C_M_RD)
- ret = friio_i2c_tuner_read(d, &msg[i]);
- else
- ret = friio_i2c_tuner_write(d, &msg[i]);
-
- if (ret < 0)
- break;
-
- usleep_range(1000, 2000); /* avoid I2C errors */
- }
-
- mutex_unlock(&d->i2c_mutex);
- return i;
-}
-
-static struct i2c_algorithm friio_tuner_i2c_algo = {
- .master_xfer = friio_tuner_i2c_xfer,
- .functionality = gl861_i2c_functionality,
-};
/* GPIO control in Friio */
/* init/config of gl861 for Friio */
/* NOTE:
* This function cannot be moved to friio_init()/dvb_usbv2_init(),
- * because the init defined here must be done before any activities like I2C,
+ * because the init defined here includes a whole device reset,
+ * it must be run early before any activities like I2C,
* but friio_init() is called by dvb-usbv2 after {_frontend, _tuner}_attach(),
* where I2C communication is used.
+ * In addition, this reset is required in reset_resume() as well.
* Thus this function is set to be called from _power_ctl().
*
* Since it will be called on the early init stage
static int friio_reset(struct dvb_usb_device *d)
{
int i, ret;
- u8 wbuf[2], rbuf[2];
+ u8 wbuf[1], rbuf[2];
static const u8 friio_init_cmds[][2] = {
{0x33, 0x08}, {0x37, 0x40}, {0x3a, 0x1f}, {0x3b, 0xff},
if (ret < 0)
return ret;
- wbuf[0] = 0x11;
- wbuf[1] = 0x02;
- ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ ret = gl861_short_write(d, 0x00, 0x11, 0x02);
if (ret < 0)
return ret;
usleep_range(2000, 3000);
- wbuf[0] = 0x11;
- wbuf[1] = 0x00;
- ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ ret = gl861_short_write(d, 0x00, 0x11, 0x00);
if (ret < 0)
return ret;
*/
usleep_range(1000, 2000);
- wbuf[0] = 0x03;
- wbuf[1] = 0x80;
- ret = gl861_i2c_write_ex(d, 0x09, wbuf, 2);
+ wbuf[0] = 0x80;
+ ret = gl861_ctrl_msg(d, CMD_WRITE, 0x09 << 9, 0x03, wbuf, 1);
if (ret < 0)
return ret;
usleep_range(2000, 3000);
- ret = gl861_i2c_read_ex(d, 0x09, rbuf, 2);
+ ret = gl861_ctrl_msg(d, CMD_READ, 0x09 << 9, 0x0100, rbuf, 2);
if (ret < 0)
return ret;
if (rbuf[0] != 0xff || rbuf[1] != 0xff)
usleep_range(1000, 2000);
- ret = gl861_i2c_write_ex(d, 0x48, wbuf, 2);
+ wbuf[0] = 0x80;
+ ret = gl861_ctrl_msg(d, CMD_WRITE, 0x48 << 9, 0x03, wbuf, 1);
if (ret < 0)
return ret;
usleep_range(2000, 3000);
- ret = gl861_i2c_read_ex(d, 0x48, rbuf, 2);
+ ret = gl861_ctrl_msg(d, CMD_READ, 0x48 << 9, 0x0100, rbuf, 2);
if (ret < 0)
return ret;
if (rbuf[0] != 0xff || rbuf[1] != 0xff)
return -ENODEV;
- wbuf[0] = 0x30;
- wbuf[1] = 0x04;
- ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ ret = gl861_short_write(d, 0x00, 0x30, 0x04);
if (ret < 0)
return ret;
- wbuf[0] = 0x00;
- wbuf[1] = 0x01;
- ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ ret = gl861_short_write(d, 0x00, 0x00, 0x01);
if (ret < 0)
return ret;
- wbuf[0] = 0x06;
- wbuf[1] = 0x0f;
- ret = gl861_i2c_msg(d, 0x00, wbuf, 2, NULL, 0);
+ ret = gl861_short_write(d, 0x00, 0x06, 0x0f);
if (ret < 0)
return ret;
for (i = 0; i < ARRAY_SIZE(friio_init_cmds); i++) {
- ret = gl861_i2c_msg(d, 0x00, (u8 *)friio_init_cmds[i], 2,
- NULL, 0);
+ ret = gl861_short_write(d, 0x00, friio_init_cmds[i][0],
+ friio_init_cmds[i][1]);
if (ret < 0)
return ret;
}
struct gl861 *priv;
info = &friio_config.demod_info;
+ cfg = friio_config.demod_cfg;
d = adap_to_d(adap);
cl = dvb_module_probe("tc90522", info->type,
&d->i2c_adap, info->addr, &cfg);
return -ENODEV;
adap->fe[0] = cfg.fe;
- /* ignore cfg.tuner_i2c and create new one */
priv = adap_to_priv(adap);
priv->i2c_client_demod = cl;
- priv->tuner_adap.algo = &friio_tuner_i2c_algo;
- priv->tuner_adap.dev.parent = &d->udev->dev;
- strscpy(priv->tuner_adap.name, d->name, sizeof(priv->tuner_adap.name));
- strlcat(priv->tuner_adap.name, "-tuner", sizeof(priv->tuner_adap.name));
- priv->demod_sub_i2c = &priv->tuner_adap;
- i2c_set_adapdata(&priv->tuner_adap, d);
-
- return i2c_add_adapter(&priv->tuner_adap);
+ priv->demod_sub_i2c = cfg.tuner_i2c;
+ return 0;
}
static int friio_frontend_detach(struct dvb_usb_adapter *adap)
struct gl861 *priv;
priv = adap_to_priv(adap);
- i2c_del_adapter(&priv->tuner_adap);
dvb_module_release(priv->i2c_client_demod);
return 0;
}
git.samba.org / sfrench / cifs-2.6.git / commitdiff