Merge git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs
authorLinus Torvalds <torvalds@linux-foundation.org>
Mon, 17 May 2010 20:53:35 +0000 (13:53 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Mon, 17 May 2010 20:53:35 +0000 (13:53 -0700)
* git://git.kernel.org/pub/scm/linux/kernel/git/joern/logfs:
  logfs: handle powerfail on NAND flash
  logfs: handle errors from get_mtd_device()
  logfs: remove unused variable
  logfs: fix sync
  logfs: fix compile failure
  logfs: initialize li->li_refcount
  logfs: commit reservations under space pressure
  logfs: survive logfs_buf_recover read errors
  logfs: Close i_ino reuse race
  logfs: fix logfs_seek_hole()
  logfs: Return -EINVAL if filesystem image doesn't match
  LogFS: Fix typo in b6349ac8
  logfs: testing the wrong variable

550 files changed:
Documentation/DocBook/libata.tmpl
Documentation/feature-removal-schedule.txt
Documentation/filesystems/proc.txt
Documentation/i2c/writing-clients
Documentation/input/elantech.txt
Documentation/spi/spidev_test.c
MAINTAINERS
Makefile
arch/alpha/include/asm/atomic.h
arch/arm/Kconfig
arch/arm/boot/compressed/head.S
arch/arm/configs/bcmring_defconfig
arch/arm/configs/imote2_defconfig
arch/arm/include/asm/assembler.h
arch/arm/include/asm/atomic.h
arch/arm/include/asm/cacheflush.h
arch/arm/include/asm/elf.h
arch/arm/include/asm/futex.h
arch/arm/include/asm/smp_twd.h
arch/arm/include/asm/tlbflush.h
arch/arm/include/asm/uaccess.h
arch/arm/kernel/entry-armv.S
arch/arm/kernel/ftrace.c
arch/arm/kernel/process.c
arch/arm/kernel/smp.c
arch/arm/kernel/smp_twd.c
arch/arm/lib/backtrace.S
arch/arm/lib/clear_user.S
arch/arm/lib/copy_from_user.S
arch/arm/lib/copy_to_user.S
arch/arm/lib/csumpartialcopyuser.S
arch/arm/lib/getuser.S
arch/arm/lib/putuser.S
arch/arm/lib/strncpy_from_user.S
arch/arm/lib/strnlen_user.S
arch/arm/lib/uaccess.S
arch/arm/mach-davinci/da830.c
arch/arm/mach-mx5/clock-mx51.c
arch/arm/mach-pxa/include/mach/colibri.h
arch/arm/mach-pxa/include/mach/hardware.h
arch/arm/mach-pxa/include/mach/regs-u2d.h
arch/arm/mach-pxa/raumfeld.c
arch/arm/mach-pxa/spitz.c
arch/arm/mach-pxa/viper.c
arch/arm/mach-realview/core.c
arch/arm/mach-sa1100/Kconfig
arch/arm/mach-sa1100/cpu-sa1110.c
arch/arm/mm/alignment.c
arch/arm/mm/cache-v6.S
arch/arm/mm/cache-v7.S
arch/arm/mm/init.c
arch/arm/mm/nommu.c
arch/arm/mm/proc-sa1100.S
arch/arm/mm/tlb-v7.S
arch/arm/nwfpe/entry.S
arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
arch/arm/plat-omap/include/plat/usb.h
arch/arm/plat-pxa/dma.c
arch/arm/tools/mach-types
arch/avr32/include/asm/atomic.h
arch/cris/include/asm/atomic.h
arch/frv/include/asm/atomic.h
arch/h8300/include/asm/atomic.h
arch/ia64/include/asm/atomic.h
arch/m32r/include/asm/atomic.h
arch/m68k/include/asm/atomic_mm.h
arch/m68k/include/asm/atomic_no.h
arch/microblaze/configs/mmu_defconfig
arch/microblaze/configs/nommu_defconfig
arch/microblaze/include/asm/cache.h
arch/microblaze/include/asm/dma.h
arch/microblaze/include/asm/exceptions.h
arch/microblaze/include/asm/io.h
arch/microblaze/include/asm/page.h
arch/microblaze/include/asm/pci.h
arch/microblaze/include/asm/pgalloc.h
arch/microblaze/include/asm/pgtable.h
arch/microblaze/include/asm/uaccess.h
arch/microblaze/kernel/asm-offsets.c
arch/microblaze/kernel/cpu/cache.c
arch/microblaze/kernel/cpu/mb.c
arch/microblaze/kernel/dma.c
arch/microblaze/kernel/entry-nommu.S
arch/microblaze/kernel/exceptions.c
arch/microblaze/kernel/head.S
arch/microblaze/kernel/irq.c
arch/microblaze/kernel/microblaze_ksyms.c
arch/microblaze/kernel/misc.S
arch/microblaze/kernel/module.c
arch/microblaze/kernel/traps.c
arch/microblaze/kernel/vmlinux.lds.S
arch/microblaze/mm/consistent.c
arch/microblaze/mm/fault.c
arch/microblaze/mm/init.c
arch/microblaze/mm/pgtable.c
arch/microblaze/pci/pci-common.c
arch/mips/Kconfig
arch/mips/Makefile
arch/mips/alchemy/devboards/db1200/setup.c
arch/mips/configs/bcm63xx_defconfig
arch/mips/include/asm/atomic.h
arch/mips/include/asm/cmpxchg.h
arch/mips/include/asm/mach-loongson/loongson.h
arch/mips/include/asm/mipsregs.h
arch/mips/include/asm/pgtable-64.h
arch/mips/include/asm/ptrace.h
arch/mips/include/asm/stackframe.h
arch/mips/include/asm/uasm.h
arch/mips/jazz/setup.c
arch/mips/kernel/scall64-n32.S
arch/mips/kernel/traps.c
arch/mips/loongson/common/machtype.c
arch/mips/loongson/common/mem.c
arch/mips/loongson/common/reset.c
arch/mips/loongson/common/setup.c
arch/mips/loongson/lemote-2f/irq.c
arch/mips/math-emu/cp1emu.c
arch/mips/mm/tlbex.c
arch/mips/nxp/pnx8550/common/reset.c
arch/mips/oprofile/op_model_loongson2.c
arch/mips/pci/pci-sb1250.c
arch/mips/sgi-ip22/ip22-berr.c
arch/mips/sgi-ip22/ip28-berr.c
arch/mips/sibyte/swarm/setup.c
arch/mn10300/include/asm/atomic.h
arch/parisc/include/asm/atomic.h
arch/powerpc/configs/83xx/asp8347_defconfig
arch/powerpc/configs/83xx/kmeter1_defconfig
arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
arch/powerpc/configs/83xx/mpc832x_mds_defconfig
arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
arch/powerpc/configs/83xx/mpc834x_itx_defconfig
arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
arch/powerpc/configs/83xx/mpc834x_mds_defconfig
arch/powerpc/configs/83xx/mpc836x_mds_defconfig
arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
arch/powerpc/configs/83xx/mpc837x_mds_defconfig
arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
arch/powerpc/configs/83xx/sbc834x_defconfig
arch/powerpc/configs/85xx/ksi8560_defconfig
arch/powerpc/configs/85xx/mpc8540_ads_defconfig
arch/powerpc/configs/85xx/mpc8560_ads_defconfig
arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
arch/powerpc/configs/85xx/sbc8548_defconfig
arch/powerpc/configs/85xx/sbc8560_defconfig
arch/powerpc/configs/85xx/socrates_defconfig
arch/powerpc/configs/85xx/stx_gp3_defconfig
arch/powerpc/configs/85xx/tqm8540_defconfig
arch/powerpc/configs/85xx/tqm8541_defconfig
arch/powerpc/configs/85xx/tqm8548_defconfig
arch/powerpc/configs/85xx/tqm8555_defconfig
arch/powerpc/configs/85xx/tqm8560_defconfig
arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
arch/powerpc/configs/86xx/gef_ppc9a_defconfig
arch/powerpc/configs/86xx/gef_sbc310_defconfig
arch/powerpc/configs/86xx/gef_sbc610_defconfig
arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
arch/powerpc/configs/86xx/sbc8641d_defconfig
arch/powerpc/configs/adder875_defconfig
arch/powerpc/configs/c2k_defconfig
arch/powerpc/configs/ep8248e_defconfig
arch/powerpc/configs/ep88xc_defconfig
arch/powerpc/configs/linkstation_defconfig
arch/powerpc/configs/mgcoge_defconfig
arch/powerpc/configs/mgsuvd_defconfig
arch/powerpc/configs/mpc7448_hpc2_defconfig
arch/powerpc/configs/mpc8272_ads_defconfig
arch/powerpc/configs/mpc83xx_defconfig
arch/powerpc/configs/mpc85xx_defconfig
arch/powerpc/configs/mpc85xx_smp_defconfig
arch/powerpc/configs/mpc866_ads_defconfig
arch/powerpc/configs/mpc86xx_defconfig
arch/powerpc/configs/mpc885_ads_defconfig
arch/powerpc/configs/pq2fads_defconfig
arch/powerpc/configs/prpmc2800_defconfig
arch/powerpc/configs/ps3_defconfig
arch/powerpc/configs/storcenter_defconfig
arch/powerpc/include/asm/hw_irq.h
arch/powerpc/include/asm/page.h
arch/powerpc/kernel/asm-offsets.c
arch/powerpc/kernel/dma-swiotlb.c
arch/powerpc/kernel/entry_64.S
arch/powerpc/kernel/irq.c
arch/powerpc/kernel/prom_init.c
arch/powerpc/kernel/time.c
arch/powerpc/kvm/44x_tlb.c
arch/powerpc/mm/fsl_booke_mmu.c
arch/powerpc/mm/numa.c
arch/powerpc/platforms/85xx/Kconfig
arch/powerpc/platforms/86xx/Kconfig
arch/powerpc/platforms/pseries/hotplug-memory.c
arch/powerpc/sysdev/cpm1.c
arch/powerpc/sysdev/cpm2.c
arch/s390/kernel/head31.S
arch/s390/kernel/head64.S
arch/s390/kernel/ptrace.c
arch/sh/configs/rts7751r2d1_defconfig
arch/sh/configs/rts7751r2dplus_defconfig
arch/sh/drivers/pci/pci-sh7751.c
arch/sh/include/asm/atomic.h
arch/sh/include/cpu-sh4/cpu/dma-register.h
arch/sparc/include/asm/atomic_32.h
arch/sparc/include/asm/atomic_64.h
arch/x86/include/asm/atomic.h
arch/x86/include/asm/atomic64_64.h
arch/x86/include/asm/io.h
arch/x86/include/asm/k8.h
arch/x86/kernel/apb_timer.c
arch/x86/kernel/apic/io_apic.c
arch/x86/kernel/cpu/cpufreq/powernow-k8.c
arch/x86/kernel/cpu/intel.c
arch/x86/kernel/cpu/intel_cacheinfo.c
arch/x86/kernel/kprobes.c
arch/x86/kernel/process.c
arch/x86/kernel/process_64.c
arch/x86/kvm/svm.c
arch/x86/kvm/vmx.c
arch/x86/kvm/x86.c
arch/x86/lib/rwsem_64.S
arch/x86/mm/ioremap.c
arch/x86/mm/pgtable_32.c
arch/x86/mm/srat_64.c
arch/x86/pci/mrst.c
arch/xtensa/include/asm/atomic.h
block/blk-cgroup.c
block/cfq-iosched.c
crypto/async_tx/async_raid6_recov.c
drivers/Makefile
drivers/acpi/acpi_pad.c
drivers/acpi/bus.c
drivers/acpi/hest.c
drivers/acpi/power_meter.c
drivers/acpi/sbshc.c
drivers/acpi/sleep.c
drivers/ata/pata_pcmcia.c
drivers/block/drbd/drbd_worker.c
drivers/block/pktcdvd.c
drivers/char/isicom.c
drivers/char/istallion.c
drivers/char/mxser.c
drivers/char/riscom8.c
drivers/char/stallion.c
drivers/char/tty_io.c
drivers/cpuidle/governors/menu.c
drivers/dma/shdma.c
drivers/dma/txx9dmac.c
drivers/edac/edac_mce_amd.c
drivers/gpio/gpiolib.c
drivers/gpio/it8761e_gpio.c
drivers/gpio/pl061.c
drivers/gpu/drm/drm_memory.c
drivers/gpu/drm/drm_sysfs.c
drivers/gpu/drm/i915/i915_irq.c
drivers/gpu/drm/radeon/atombios.h
drivers/gpu/drm/radeon/r100.c
drivers/gpu/drm/radeon/r100_track.h
drivers/gpu/drm/radeon/r300.c
drivers/gpu/drm/radeon/radeon_agp.c
drivers/gpu/drm/radeon/radeon_atombios.c
drivers/gpu/drm/radeon/radeon_connectors.c
drivers/gpu/drm/radeon/radeon_drv.c
drivers/gpu/drm/radeon/radeon_encoders.c
drivers/gpu/drm/radeon/radeon_legacy_encoders.c
drivers/gpu/drm/radeon/radeon_mode.h
drivers/gpu/drm/radeon/radeon_state.c
drivers/gpu/drm/ttm/ttm_bo.c
drivers/gpu/drm/ttm/ttm_lock.c
drivers/gpu/drm/via/via_video.c
drivers/gpu/vga/vga_switcheroo.c
drivers/hid/hid-cherry.c
drivers/hid/hid-core.c
drivers/hid/hid-ids.h
drivers/hid/hid-ntrig.c
drivers/hid/hid-sony.c
drivers/hid/hid-wacom.c
drivers/hid/usbhid/hid-core.c
drivers/hwmon/applesmc.c
drivers/hwmon/asc7621.c
drivers/hwmon/hp_accel.c
drivers/i2c/busses/i2c-octeon.c
drivers/i2c/i2c-core.c
drivers/ide/ide-cs.c
drivers/input/joydev.c
drivers/input/joystick/iforce/iforce-main.c
drivers/input/joystick/iforce/iforce-usb.c
drivers/input/misc/ati_remote.c
drivers/input/mouse/alps.c
drivers/input/mouse/elantech.c
drivers/input/mouse/elantech.h
drivers/input/mouse/psmouse-base.c
drivers/input/mouse/psmouse.h
drivers/input/mouse/synaptics.c
drivers/input/mouse/synaptics.h
drivers/input/touchscreen/ad7877.c
drivers/input/touchscreen/eeti_ts.c
drivers/md/md.c
drivers/md/raid5.c
drivers/media/common/saa7146_fops.c
drivers/media/common/saa7146_video.c
drivers/media/dvb/frontends/stv090x.c
drivers/media/dvb/ttpci/budget.c
drivers/media/video/Kconfig
drivers/media/video/Makefile
drivers/media/video/davinci/vpfe_capture.c
drivers/media/video/gspca/sn9c20x.c
drivers/media/video/gspca/spca508.c
drivers/media/video/gspca/spca561.c
drivers/media/video/gspca/stv06xx/stv06xx.c
drivers/media/video/hexium_gemini.c
drivers/media/video/hexium_orion.c
drivers/media/video/mx1_camera.c
drivers/media/video/mxb.c
drivers/media/video/omap24xxcam.c
drivers/media/video/pxa_camera.c
drivers/media/video/sh_mobile_ceu_camera.c
drivers/mfd/wm831x-core.c
drivers/mfd/wm8350-core.c
drivers/mmc/host/at91_mci.c
drivers/mmc/host/atmel-mci.c
drivers/mtd/internal.h [deleted file]
drivers/mtd/mtdbdi.c [deleted file]
drivers/net/arm/ep93xx_eth.c
drivers/net/e1000e/netdev.c
drivers/net/fec.c
drivers/net/gianfar.c
drivers/net/phy/Kconfig
drivers/net/phy/Makefile
drivers/net/phy/mdio-octeon.c
drivers/net/phy/micrel.c [new file with mode: 0644]
drivers/net/ppp_generic.c
drivers/net/r8169.c
drivers/net/sb1250-mac.c
drivers/net/usb/Kconfig
drivers/net/usb/dm9601.c
drivers/net/usb/sierra_net.c
drivers/net/veth.c
drivers/net/wireless/ath/ar9170/usb.c
drivers/net/wireless/ath/ar9170/usb.h
drivers/net/wireless/iwlwifi/iwl-commands.h
drivers/net/wireless/iwlwifi/iwl-scan.c
drivers/net/wireless/iwlwifi/iwl3945-base.c
drivers/net/wireless/p54/p54pci.c
drivers/of/of_mdio.c
drivers/pci/hotplug/rpadlpar_core.c
drivers/pci/hotplug/rpaphp_core.c
drivers/pci/setup-bus.c
drivers/pcmcia/cs.c
drivers/pcmcia/db1xxx_ss.c
drivers/pcmcia/ds.c
drivers/pcmcia/pcmcia_ioctl.c
drivers/pnp/pnpacpi/rsparser.c
drivers/pnp/resource.c
drivers/s390/block/dasd.c
drivers/scsi/advansys.c
drivers/scsi/libiscsi.c
drivers/scsi/libsas/sas_ata.c
drivers/scsi/libsas/sas_scsi_host.c
drivers/scsi/scsi_debug.c
drivers/scsi/scsi_error.c
drivers/scsi/sd.c
drivers/serial/8250_pnp.c
drivers/serial/imx.c
drivers/serial/mpc52xx_uart.c
drivers/serial/pmac_zilog.c
drivers/serial/serial_ks8695.c
drivers/spi/omap2_mcspi.c
drivers/spi/spi.c
drivers/staging/dt3155/dt3155_drv.c
drivers/staging/hv/Hv.c
drivers/staging/hv/RndisFilter.c
drivers/staging/hv/netvsc_drv.c
drivers/staging/iio/accel/lis3l02dq_core.c
drivers/staging/iio/accel/lis3l02dq_ring.c
drivers/staging/iio/adc/max1363_core.c
drivers/staging/iio/industrialio-core.c
drivers/staging/iio/light/tsl2563.c
drivers/staging/iio/ring_sw.c
drivers/staging/octeon/cvmx-helper-board.c
drivers/staging/rt2860/usb_main_dev.c
drivers/staging/rtl8192su/r8192U_core.c
drivers/staging/usbip/usbip_event.c
drivers/staging/vme/bridges/vme_tsi148.c
drivers/usb/class/cdc-acm.c
drivers/usb/core/Kconfig
drivers/usb/core/generic.c
drivers/usb/core/inode.c
drivers/usb/core/usb.c
drivers/usb/gadget/s3c-hsotg.c
drivers/usb/host/ohci-at91.c
drivers/usb/host/ohci-hub.c
drivers/usb/host/oxu210hp-hcd.c
drivers/usb/host/sl811-hcd.c
drivers/usb/host/xhci-mem.c
drivers/usb/host/xhci.h
drivers/usb/musb/Kconfig
drivers/usb/musb/Makefile
drivers/usb/musb/blackfin.c
drivers/usb/musb/davinci.c
drivers/usb/musb/musb_core.c
drivers/usb/musb/musb_core.h
drivers/usb/musb/musb_host.c
drivers/usb/musb/omap2430.c
drivers/usb/musb/tusb6010.c
drivers/usb/musb/tusb6010_omap.c
drivers/usb/serial/option.c
drivers/usb/serial/pl2303.c
drivers/usb/serial/pl2303.h
drivers/usb/serial/ti_usb_3410_5052.c
drivers/vhost/vhost.c
drivers/video/bfin-t350mcqb-fb.c
drivers/video/sh_mobile_lcdcfb.c
drivers/watchdog/Kconfig
drivers/watchdog/ep93xx_wdt.c
drivers/watchdog/mpcore_wdt.c
fs/autofs4/root.c
fs/btrfs/ioctl.c
fs/cachefiles/internal.h
fs/cachefiles/namei.c
fs/cachefiles/security.c
fs/ceph/addr.c
fs/ceph/auth.c
fs/ceph/auth_none.h
fs/ceph/auth_x.c
fs/ceph/caps.c
fs/ceph/dir.c
fs/ceph/file.c
fs/ceph/inode.c
fs/ceph/mds_client.c
fs/ceph/messenger.c
fs/ceph/messenger.h
fs/ceph/osd_client.c
fs/ceph/osd_client.h
fs/ceph/osdmap.c
fs/ceph/osdmap.h
fs/ceph/rados.h
fs/ceph/snap.c
fs/ceph/super.c
fs/ceph/super.h
fs/cifs/cifsglob.h
fs/cifs/inode.c
fs/compat.c
fs/compat_ioctl.c
fs/configfs/dir.c
fs/exec.c
fs/exofs/exofs.h
fs/jfs/super.c
fs/logfs/super.c
fs/namei.c
fs/namespace.c
fs/nfs/client.c
fs/nfs/delegation.c
fs/nfs/dir.c
fs/nfs/nfs4proc.c
fs/nfs/super.c
fs/nfs/write.c
fs/nilfs2/super.c
fs/notify/inotify/Kconfig
fs/notify/inotify/inotify_fsnotify.c
fs/notify/inotify/inotify_user.c
fs/ocfs2/buffer_head_io.c
fs/ocfs2/dlm/dlmast.c
fs/ocfs2/dlmfs/dlmfs.c
fs/ocfs2/file.c
fs/ocfs2/inode.c
fs/ocfs2/inode.h
fs/ocfs2/namei.c
fs/ocfs2/refcounttree.c
fs/proc/array.c
fs/proc/task_mmu.c
fs/super.c
fs/sysv/dir.c
fs/xfs/linux-2.6/xfs_super.c
fs/xfs/linux-2.6/xfs_sync.c
fs/xfs/linux-2.6/xfs_sync.h
fs/xfs/quota/xfs_qm_syscalls.c
fs/xfs/xfs_ag.h
fs/xfs/xfs_mount.h
include/asm-generic/atomic.h
include/asm-generic/dma-mapping-common.h
include/drm/ttm/ttm_bo_driver.h
include/linux/cgroup.h
include/linux/dcache.h
include/linux/i2c.h
include/linux/if_link.h
include/linux/nfs_fs.h
include/linux/rcupdate.h
include/linux/sched.h
include/linux/types.h
include/linux/usb.h
include/media/saa7146_vv.h
include/net/sctp/sm.h
include/net/sctp/structs.h
include/net/sock.h
include/net/tcp.h
ipc/mqueue.c
kernel/acct.c
kernel/cgroup.c
kernel/cgroup_freezer.c
kernel/fork.c
kernel/kexec.c
kernel/perf_event.c
kernel/profile.c
kernel/ptrace.c
kernel/rcupdate.c
kernel/sched.c
kernel/sched_debug.c
kernel/workqueue.c
lib/btree.c
lib/rwsem.c
mm/hugetlb.c
mm/memcontrol.c
mm/rmap.c
mm/slub.c
net/core/dev.c
net/core/rtnetlink.c
net/ipv4/arp.c
net/ipv4/ipmr.c
net/ipv4/tcp.c
net/ipv4/udp.c
net/ipv6/af_inet6.c
net/ipv6/datagram.c
net/llc/llc_sap.c
net/mac80211/mlme.c
net/sctp/input.c
net/sctp/sm_make_chunk.c
net/sctp/sm_sideeffect.c
net/sctp/transport.c
net/sunrpc/auth.c
security/keys/gc.c
security/keys/keyring.c
security/keys/request_key.c
security/keys/user_defined.c
security/min_addr.c
sound/core/pcm_native.c
sound/core/timer.c
sound/isa/sb/es968.c
sound/pci/hda/patch_cirrus.c
sound/pci/hda/patch_conexant.c
sound/pci/hda/patch_realtek.c
sound/pci/hda/patch_sigmatel.c
sound/pci/ice1712/maya44.c
sound/pci/oxygen/xonar_cs43xx.c
sound/soc/txx9/txx9aclc-ac97.c
sound/soc/txx9/txx9aclc-generic.c
tools/perf/builtin-record.c
tools/perf/util/trace-event-parse.c
virt/kvm/ioapic.c
virt/kvm/ioapic.h

index ba997577150369c5d7bc655c82704e01567e685d..ff3e5bec1c24509d76f1e1bc8e8d5379c4a54a60 100644 (file)
@@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
        issue of SET FEATURES - XFER MODE, and prior to operation.
        </para>
        <para>
-       Called by ata_device_add() after ata_dev_identify() determines
-       a device is present.
-       </para>
-       <para>
        This entry may be specified as NULL in ata_port_operations.
        </para>
 
@@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in
 
        <sect2><title>Taskfile read/write</title>
        <programlisting>
-void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
-void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
        </programlisting>
 
        <para>
@@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
        hardware registers / DMA buffers, to obtain the current set of
        taskfile register values.
        Most drivers for taskfile-based hardware (PIO or MMIO) use
-       ata_tf_load() and ata_tf_read() for these hooks.
+       ata_sff_tf_load() and ata_sff_tf_read() for these hooks.
        </para>
 
        </sect2>
 
        <sect2><title>PIO data read/write</title>
        <programlisting>
-void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
+void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int);
        </programlisting>
 
        <para>
 All bmdma-style drivers must implement this hook.  This is the low-level
 operation that actually copies the data bytes during a PIO data
 transfer.
-Typically the driver
-will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or
-ata_mmio_data_xfer().
+Typically the driver will choose one of ata_sff_data_xfer_noirq(),
+ata_sff_data_xfer(), or ata_sff_data_xfer32().
        </para>
 
        </sect2>
 
        <sect2><title>ATA command execute</title>
        <programlisting>
-void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
+void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
        </programlisting>
 
        <para>
        causes an ATA command, previously loaded with
        ->tf_load(), to be initiated in hardware.
-       Most drivers for taskfile-based hardware use ata_exec_command()
+       Most drivers for taskfile-based hardware use ata_sff_exec_command()
        for this hook.
        </para>
 
@@ -218,8 +213,8 @@ command.
 
        <sect2><title>Read specific ATA shadow registers</title>
        <programlisting>
-u8   (*check_status)(struct ata_port *ap);
-u8   (*check_altstatus)(struct ata_port *ap);
+u8   (*sff_check_status)(struct ata_port *ap);
+u8   (*sff_check_altstatus)(struct ata_port *ap);
        </programlisting>
 
        <para>
@@ -227,20 +222,14 @@ u8   (*check_altstatus)(struct ata_port *ap);
        hardware.  On some hardware, reading the Status register has
        the side effect of clearing the interrupt condition.
        Most drivers for taskfile-based hardware use
-       ata_check_status() for this hook.
-       </para>
-       <para>
-       Note that because this is called from ata_device_add(), at
-       least a dummy function that clears device interrupts must be
-       provided for all drivers, even if the controller doesn't
-       actually have a taskfile status register.
+       ata_sff_check_status() for this hook.
        </para>
 
        </sect2>
 
        <sect2><title>Select ATA device on bus</title>
        <programlisting>
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+void (*sff_dev_select)(struct ata_port *ap, unsigned int device);
        </programlisting>
 
        <para>
@@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
        </para>
        <para>
        Most drivers for taskfile-based hardware use
-       ata_std_dev_select() for this hook.  Controllers which do not
-       support second drives on a port (such as SATA contollers) will
-       use ata_noop_dev_select().
+       ata_sff_dev_select() for this hook.
        </para>
 
        </sect2>
@@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *);
        to struct ata_host_set.
        </para>
        <para>
-       Most legacy IDE drivers use ata_interrupt() for the
+       Most legacy IDE drivers use ata_sff_interrupt() for the
        irq_handler hook, which scans all ports in the host_set,
        determines which queued command was active (if any), and calls
-       ata_host_intr(ap,qc).
+       ata_sff_host_intr(ap,qc).
        </para>
        <para>
-       Most legacy IDE drivers use ata_bmdma_irq_clear() for the
+       Most legacy IDE drivers use ata_sff_irq_clear() for the
        irq_clear() hook, which simply clears the interrupt and error
        flags in the DMA status register.
        </para>
@@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set);
        data from port at this time.
        </para>
        <para>
-       Many drivers use ata_port_stop() as this hook, which frees the
-       PRD table.
-       </para>
-       <para>
        ->host_stop() is called after all ->port_stop() calls
 have completed.  The hook must finalize hardware shutdown, release DMA
 and other resources, etc.
index ed511af0f79a5697d560a00d37ee26f601198673..05df0b7514b6b884d38c545f8bb838cdfeb1d162 100644 (file)
@@ -589,3 +589,26 @@ Why:       Useful in 2003, implementation is a hack.
        Generally invoked by accident today.
        Seen as doing more harm than good.
 Who:   Len Brown <len.brown@intel.com>
+
+----------------------------
+
+What:  video4linux /dev/vtx teletext API support
+When:  2.6.35
+Files: drivers/media/video/saa5246a.c drivers/media/video/saa5249.c
+       include/linux/videotext.h
+Why:   The vtx device nodes have been superseded by vbi device nodes
+       for many years. No applications exist that use the vtx support.
+       Of the two i2c drivers that actually support this API the saa5249
+       has been impossible to use for a year now and no known hardware
+       that supports this device exists. The saa5246a is theoretically
+       supported by the old mxb boards, but it never actually worked.
+
+       In summary: there is no hardware that can use this API and there
+       are no applications actually implementing this API.
+
+       The vtx support still reserves minors 192-223 and we would really
+       like to reuse those for upcoming new functionality. In the unlikely
+       event that new hardware appears that wants to use the functionality
+       provided by the vtx API, then that functionality should be build
+       around the sliced VBI API instead.
+Who:   Hans Verkuil <hverkuil@xs4all.nl>
index a4f30faa4f1f73ad4622b333007525f9134c21c4..1e359b62c40a2eb67e04ab299012760587cab29a 100644 (file)
@@ -316,7 +316,7 @@ address           perms offset  dev   inode      pathname
 08049000-0804a000 rw-p 00001000 03:00 8312       /opt/test
 0804a000-0806b000 rw-p 00000000 00:00 0          [heap]
 a7cb1000-a7cb2000 ---p 00000000 00:00 0
-a7cb2000-a7eb2000 rw-p 00000000 00:00 0          [threadstack:001ff4b4]
+a7cb2000-a7eb2000 rw-p 00000000 00:00 0
 a7eb2000-a7eb3000 ---p 00000000 00:00 0
 a7eb3000-a7ed5000 rw-p 00000000 00:00 0
 a7ed5000-a8008000 r-xp 00000000 03:00 4222       /lib/libc.so.6
@@ -352,7 +352,6 @@ is not associated with a file:
  [stack]                  = the stack of the main process
  [vdso]                   = the "virtual dynamic shared object",
                             the kernel system call handler
- [threadstack:xxxxxxxx]   = the stack of the thread, xxxxxxxx is the stack size
 
  or if empty, the mapping is anonymous.
 
index 3219ee0dbfef1eab9493253d6307acd7bb282019..5ebf5af1d71606ae3d6d31557f97ce7f3077add7 100644 (file)
@@ -74,6 +74,11 @@ structure at all.  You should use this to keep device-specific data.
        /* retrieve the value */
        void *i2c_get_clientdata(const struct i2c_client *client);
 
+Note that starting with kernel 2.6.34, you don't have to set the `data' field
+to NULL in remove() or if probe() failed anymore. The i2c-core does this
+automatically on these occasions. Those are also the only times the core will
+touch this field.
+
 
 Accessing the client
 ====================
index a10c3b6ba7c427152706811ab960bb17a0d53290..56941ae1f5dbd2b161f7871ad3959f46ae227f89 100644 (file)
@@ -333,14 +333,14 @@ byte 0:
 byte 1:
 
    bit   7   6   5   4   3   2   1   0
-        x15 x14 x13 x12 x11 x10 x9  x8
+         .   .   .   .   .  x10 x9  x8
 
 byte 2:
 
    bit   7   6   5   4   3   2   1   0
         x7  x6  x5  x4  x4  x2  x1  x0
 
-         x15..x0 = absolute x value (horizontal)
+         x10..x0 = absolute x value (horizontal)
 
 byte 3:
 
@@ -350,14 +350,14 @@ byte 3:
 byte 4:
 
    bit   7   6   5   4   3   2   1   0
-        y15 y14 y13 y12 y11 y10 y8  y8
+         .   .   .   .   .   .  y9  y8
 
 byte 5:
 
    bit   7   6   5   4   3   2   1   0
         y7  y6  y5  y4  y3  y2  y1  y0
 
-         y15..y0 = absolute y value (vertical)
+         y9..y0 = absolute y value (vertical)
 
 
 4.2.2 Two finger touch
index 10abd3773e49122aab0dfad27f7cb2c91b8d5d08..16feda9014692a87a4996bf51d759ab9e7500ee5 100644 (file)
@@ -58,7 +58,7 @@ static void transfer(int fd)
        };
 
        ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr);
-       if (ret == 1)
+       if (ret < 1)
                pabort("can't send spi message");
 
        for (ret = 0; ret < ARRAY_SIZE(tx); ret++) {
index 183887518fe3a04e137c192186348ba59f043543..d329b053a7185b2a31c3e92b95168b94f90b9618 100644 (file)
@@ -4482,17 +4482,17 @@ S:      Maintained
 F:     drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-M:     Geoff Levand <geoffrey.levand@am.sony.com>
+M:     Geoff Levand <geoff@infradead.org>
 L:     netdev@vger.kernel.org
 L:     cbe-oss-dev@ozlabs.org
-S:     Supported
+S:     Maintained
 F:     drivers/net/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
-M:     Geoff Levand <geoffrey.levand@am.sony.com>
+M:     Geoff Levand <geoff@infradead.org>
 L:     linuxppc-dev@ozlabs.org
 L:     cbe-oss-dev@ozlabs.org
-S:     Supported
+S:     Maintained
 F:     arch/powerpc/boot/ps3*
 F:     arch/powerpc/include/asm/lv1call.h
 F:     arch/powerpc/include/asm/ps3*.h
@@ -5492,7 +5492,7 @@ S:        Maintained
 F:     drivers/mmc/host/tmio_mmc.*
 
 TMPFS (SHMEM FILESYSTEM)
-M:     Hugh Dickins <hugh.dickins@tiscali.co.uk>
+M:     Hugh Dickins <hughd@google.com>
 L:     linux-mm@kvack.org
 S:     Maintained
 F:     include/linux/shmem_fs.h
index fa1db90017547b0b4194dd02a0c0e1b1b54da333..ebc8225f7a96734d316b67de361caa446830033b 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 34
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*
index 610dff44d94b9bfae101f76149f965b4400d07ff..e756d04b6cd5dcdf07b4f394b8be15f1814c4849 100644 (file)
@@ -17,8 +17,8 @@
 #define ATOMIC_INIT(i)         ( (atomic_t) { (i) } )
 #define ATOMIC64_INIT(i)       ( (atomic64_t) { (i) } )
 
-#define atomic_read(v)         ((v)->counter + 0)
-#define atomic64_read(v)       ((v)->counter + 0)
+#define atomic_read(v)         (*(volatile int *)&(v)->counter)
+#define atomic64_read(v)       (*(volatile long *)&(v)->counter)
 
 #define atomic_set(v,i)                ((v)->counter = (i))
 #define atomic64_set(v,i)      ((v)->counter = (i))
index c5408bf1bf43321e49f525ada25456b538f97f78..92622eb5cc0da6f651c31cdaf0ff55f8bba16977 100644 (file)
@@ -253,6 +253,7 @@ config ARCH_REALVIEW
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
        select ARCH_WANT_OPTIONAL_GPIOLIB
+       select GPIO_PL061 if GPIOLIB
        help
          This enables support for ARM Ltd RealView boards.
 
index 6ab6b337a913c67f7951fdf0623ac87efd168b1d..c5191b1532e8284cbeac17cef819522863a90743 100644 (file)
@@ -685,8 +685,8 @@ proc_types:
                W(b)    __armv4_mmu_cache_off
                W(b)    __armv4_mmu_cache_flush
 
-               .word   0x56056930
-               .word   0xff0ffff0              @ PXA935
+               .word   0x56056900
+               .word   0xffffff00              @ PXA9xx
                W(b)    __armv4_mmu_cache_on
                W(b)    __armv4_mmu_cache_off
                W(b)    __armv4_mmu_cache_flush
@@ -697,12 +697,6 @@ proc_types:
                W(b)    __armv4_mmu_cache_off
                W(b)    __armv5tej_mmu_cache_flush
 
-               .word   0x56056930
-               .word   0xff0ffff0              @ PXA935
-               W(b)    __armv4_mmu_cache_on
-               W(b)    __armv4_mmu_cache_off
-               W(b)    __armv4_mmu_cache_flush
-
                .word   0x56050000              @ Feroceon
                .word   0xff0f0000
                W(b)    __armv4_mmu_cache_on
index 1e12167c89b7210abad6f3a789cdc4d595d89fd7..6ac6693299bc0937c0dcb42e410f21f019375488 100644 (file)
@@ -1,13 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Fri Jul 17 12:07:28 2009
+# Linux kernel version: 2.6.34-rc2
+# Mon Mar 29 12:01:41 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -32,6 +33,12 @@ CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 # CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
+# CONFIG_KERNEL_LZO is not set
 # CONFIG_SWAP is not set
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
@@ -43,21 +50,22 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
@@ -75,19 +83,21 @@ CONFIG_FUTEX=y
 # CONFIG_EVENTFD is not set
 CONFIG_SHMEM=y
 # CONFIG_AIO is not set
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
+CONFIG_PERF_EVENTS=y
+CONFIG_PERF_COUNTERS=y
 # CONFIG_VM_EVENT_COUNTERS is not set
 # CONFIG_SLUB_DEBUG is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -115,24 +125,53 @@ CONFIG_LBDAF=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 # CONFIG_IOSCHED_DEADLINE is not set
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
+CONFIG_ARCH_BCMRING=y
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
@@ -149,6 +188,7 @@ CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -157,19 +197,26 @@ CONFIG_DEFAULT_IOSCHED="noop"
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-CONFIG_ARCH_BCMRING=y
 # CONFIG_ARCH_FPGA11107 is not set
 CONFIG_ARCH_BCM11107=y
 
@@ -185,7 +232,7 @@ CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
 CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -201,6 +248,8 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_CPU_HAS_PMU=y
 # CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
@@ -222,6 +271,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -229,6 +280,7 @@ CONFIG_AEABI=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
+CONFIG_HW_PERF_EVENTS=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -240,8 +292,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 CONFIG_UACCESS_WITH_MEMCPY=y
@@ -335,9 +386,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -433,6 +484,10 @@ CONFIG_MTD_NAND_BCM_UMI_HWCS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
@@ -444,6 +499,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -452,6 +508,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -459,6 +516,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -508,6 +566,7 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -519,13 +578,17 @@ CONFIG_LEGACY_PTY_COUNT=64
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -541,6 +604,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -566,14 +630,17 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -589,9 +656,12 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 # CONFIG_FILE_LOCKING is not set
 # CONFIG_FSNOTIFY is not set
+# CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -647,6 +717,7 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -657,7 +728,6 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -675,11 +745,12 @@ CONFIG_MSDOS_PARTITION=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 CONFIG_HEADERS_CHECK=y
 # CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_MEMORY_INIT is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
@@ -693,6 +764,7 @@ CONFIG_TRACING_SUPPORT=y
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_ARM_UNWIND is not set
 # CONFIG_DEBUG_USER is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -700,7 +772,11 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_BINARY_PRINTF is not set
 
index 95d2becfc6641efc5d6bb399c4ad0d949c901552..21f2bff8a363aa9728c77b81d9f7eddb135c6c6d 100644 (file)
@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc8
-# Sat Feb 13 21:48:53 2010
+# Linux kernel version: 2.6.34-rc2
+# Thu Apr  8 14:49:08 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_HAVE_PROC_CPU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -19,6 +20,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
@@ -60,11 +62,6 @@ CONFIG_RCU_FANOUT=32
 # CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -97,10 +94,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_PERF_USE_VMALLOC=y
 
 #
 # Kernel Performance Events And Counters
 #
+# CONFIG_PERF_EVENTS is not set
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
@@ -184,6 +185,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_BCMRING is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
@@ -193,7 +195,6 @@ CONFIG_MMU=y
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -210,21 +211,26 @@ CONFIG_MMU=y
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_NUC93X is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
 # CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_SHMOBILE is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5P6440 is not set
+# CONFIG_ARCH_S5P6442 is not set
 # CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_S5PV210 is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_U8500 is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_BCMRING is not set
-# CONFIG_ARCH_U8500 is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -253,6 +259,7 @@ CONFIG_ARCH_PXA=y
 # CONFIG_MACH_EM_X270 is not set
 # CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_CAPC7117 is not set
 # CONFIG_ARCH_GUMSTIX is not set
 CONFIG_MACH_INTELMOTE2=y
 # CONFIG_MACH_STARGATE2 is not set
@@ -275,7 +282,11 @@ CONFIG_MACH_INTELMOTE2=y
 # CONFIG_PXA_EZX is not set
 # CONFIG_MACH_MP900C is not set
 # CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_RAUMFELD_RC is not set
+# CONFIG_MACH_RAUMFELD_CONNECTOR is not set
+# CONFIG_MACH_RAUMFELD_SPEAKER is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_ICONTROL is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 CONFIG_PXA27x=y
 CONFIG_PXA_SSP=y
@@ -302,6 +313,7 @@ CONFIG_ARM_THUMB=y
 CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_CPU_HAS_PMU=y
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -352,7 +364,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
@@ -360,24 +372,8 @@ CONFIG_ATAGS_PROC=y
 #
 # CPU Power Management
 #
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-CONFIG_CPU_FREQ_DEBUG=y
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=m
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -409,6 +405,7 @@ CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
 CONFIG_PM_RUNTIME=y
+CONFIG_PM_OPS=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -416,7 +413,6 @@ CONFIG_NET=y
 # Networking options
 #
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -506,6 +502,7 @@ CONFIG_NF_CT_NETLINK=m
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
+# CONFIG_NETFILTER_XT_TARGET_CT is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
 CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_LED=m
@@ -622,6 +619,7 @@ CONFIG_IP6_NF_RAW=m
 # CONFIG_ATM is not set
 CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_BRIDGE_IGMP_SNOOPING is not set
 # CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
@@ -646,32 +644,7 @@ CONFIG_NET_CLS_ROUTE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-# CONFIG_BT_HCIUART_BCSP is not set
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_HCIVHCI=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-# CONFIG_BT_ATH3K is not set
+# CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
 # CONFIG_WIRELESS is not set
@@ -687,7 +660,8 @@ CONFIG_FIB_RULES=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_DEVTMPFS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -703,9 +677,9 @@ CONFIG_MTD=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_AR7_PARTS=y
 
 #
 # User Modules And Translation Layers
@@ -812,6 +786,7 @@ CONFIG_HAVE_IDE=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -965,6 +940,7 @@ CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
@@ -993,6 +969,7 @@ CONFIG_I2C_HELPER_AUTO=y
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
 # CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_XILINX is not set
 
 #
 # External I2C/SMBus adapter drivers
@@ -1006,15 +983,9 @@ CONFIG_I2C_PXA=y
 #
 # CONFIG_I2C_PCA_PLATFORM is not set
 # CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
 # CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
@@ -1046,10 +1017,12 @@ CONFIG_GPIO_SYSFS=y
 #
 # Memory mapped GPIO expanders:
 #
+# CONFIG_GPIO_IT8761E is not set
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX7300 is not set
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
@@ -1093,10 +1066,12 @@ CONFIG_SSB_POSSIBLE=y
 # Multifunction device drivers
 #
 # CONFIG_MFD_CORE is not set
+# CONFIG_MFD_88PM860X is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_HTC_I2CPLD is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
@@ -1105,22 +1080,25 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 CONFIG_PMIC_DA903X=y
 # CONFIG_PMIC_ADP5520 is not set
+# CONFIG_MFD_MAX8925 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_WM8994 is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_MFD_MC13783 is not set
 # CONFIG_AB3100_CORE is not set
 # CONFIG_EZX_PCAP is not set
-# CONFIG_MFD_88PM8607 is not set
 # CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_DUMMY is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
 CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
 CONFIG_REGULATOR_USERSPACE_CONSUMER=y
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8649 is not set
 # CONFIG_REGULATOR_MAX8660 is not set
 CONFIG_REGULATOR_DA903X=y
 # CONFIG_REGULATOR_LP3971 is not set
@@ -1218,6 +1196,7 @@ CONFIG_VIDEO_IR_I2C=y
 # CONFIG_VIDEO_SAA7191 is not set
 # CONFIG_VIDEO_TVP514X is not set
 # CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_TVP7002 is not set
 # CONFIG_VIDEO_VPX3220 is not set
 
 #
@@ -1264,15 +1243,7 @@ CONFIG_SOC_CAMERA_MT9M111=y
 CONFIG_VIDEO_PXA27x=y
 # CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_I2C_SI4713 is not set
-# CONFIG_RADIO_SI4713 is not set
-# CONFIG_USB_DSBR is not set
-# CONFIG_RADIO_SI470X is not set
-# CONFIG_USB_MR800 is not set
-CONFIG_RADIO_TEA5764=y
-CONFIG_RADIO_TEA5764_XTAL=y
-# CONFIG_RADIO_TEF6862 is not set
+# CONFIG_RADIO_ADAPTERS is not set
 # CONFIG_DAB is not set
 
 #
@@ -1398,8 +1369,6 @@ CONFIG_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_APPLE=m
-# CONFIG_HID_WACOM is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1477,7 +1446,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1489,7 +1457,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_TEST is not set
 # CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
 # CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -1529,6 +1496,7 @@ CONFIG_USB_ETH=y
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
 # CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_USB_G_NOKIA is not set
 # CONFIG_USB_G_MULTI is not set
 
 #
@@ -1555,8 +1523,6 @@ CONFIG_SDIO_UART=m
 #
 CONFIG_MMC_PXA=y
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_AT91 is not set
-# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_SPI=y
 # CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
@@ -1574,11 +1540,11 @@ CONFIG_LEDS_LP3944=y
 # CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
 # CONFIG_LEDS_LT3593 is not set
+CONFIG_LEDS_TRIGGERS=y
 
 #
 # LED Triggers
 #
-CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_LEDS_TRIGGER_BACKLIGHT=y
@@ -1656,7 +1622,7 @@ CONFIG_RTC_INTF_DEV=y
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_SA1100 is not set
-# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PXA=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
@@ -1681,19 +1647,10 @@ CONFIG_EXT3_FS_XATTR=y
 CONFIG_JBD=m
 # CONFIG_JBD_DEBUG is not set
 CONFIG_FS_MBCACHE=m
-CONFIG_REISERFS_FS=m
-# CONFIG_REISERFS_CHECK is not set
-# CONFIG_REISERFS_PROC_INFO is not set
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
+# CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
 # CONFIG_NILFS2_FS is not set
@@ -1716,9 +1673,7 @@ CONFIG_CUSE=m
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
+# CONFIG_ISO9660_FS is not set
 # CONFIG_UDF_FS is not set
 
 #
@@ -1750,12 +1705,14 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_FS_WBUF_VERIFY=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_LZO=y
@@ -1765,6 +1722,7 @@ CONFIG_JFFS2_RUBIN=y
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
 # CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
 # CONFIG_SQUASHFS_EMBEDDED is not set
@@ -1802,6 +1760,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=m
 CONFIG_CIFS_STATS=y
 # CONFIG_CIFS_STATS2 is not set
@@ -1895,6 +1854,7 @@ CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_DEBUG_LOCK_ALLOC=y
 CONFIG_PROVE_LOCKING=y
+# CONFIG_PROVE_RCU is not set
 CONFIG_LOCKDEP=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_LOCKDEP is not set
@@ -1918,6 +1878,7 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -2061,9 +2022,9 @@ CONFIG_CRC32=y
 CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=m
-CONFIG_LZO_COMPRESS=m
-CONFIG_LZO_DECOMPRESS=m
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
@@ -2075,3 +2036,4 @@ CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
index 00f46d9ce299310360ed89a8c19e2521db58e118..6e8f05c8a1c8f61efbffbb8cab303dd28e36efc0 100644 (file)
 
 #define USER(x...)                             \
 9999:  x;                                      \
-       .section __ex_table,"a";                \
+       .pushsection __ex_table,"a";            \
        .align  3;                              \
        .long   9999b,9001f;                    \
-       .previous
+       .popsection
 
 /*
  * SMP data memory barrier
        .error  "Unsupported inc macro argument"
        .endif
 
-       .section __ex_table,"a"
+       .pushsection __ex_table,"a"
        .align  3
        .long   9999b, \abort
-       .previous
+       .popsection
        .endm
 
        .macro  usracc, instr, reg, ptr, inc, cond, rept, abort
        .error  "Unsupported inc macro argument"
        .endif
 
-       .section __ex_table,"a"
+       .pushsection __ex_table,"a"
        .align  3
        .long   9999b, \abort
-       .previous
+       .popsection
        .endr
        .endm
 
index e8ddec2cb158763d5d0a7741d44ee9e25d90696d..a0162fa9456496662adb28898fcb44776e628414 100644 (file)
@@ -24,7 +24,7 @@
  * strex/ldrex monitor on some implementations. The reason we can use it for
  * atomic_set() is the clrex or dummy strex done on every exception return.
  */
-#define atomic_read(v) ((v)->counter)
+#define atomic_read(v) (*(volatile int *)&(v)->counter)
 #define atomic_set(v,i)        (((v)->counter) = (i))
 
 #if __LINUX_ARM_ARCH__ >= 6
index 0d08d4170b64d08f2206ce292489a917a8cb0e99..4656a24058d21f75d30097ae5b06a1b66863bdd9 100644 (file)
@@ -371,6 +371,10 @@ static inline void __flush_icache_all(void)
 #ifdef CONFIG_ARM_ERRATA_411920
        extern void v6_icache_inval_all(void);
        v6_icache_inval_all();
+#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7
+       asm("mcr        p15, 0, %0, c7, c1, 0   @ invalidate I-cache inner shareable\n"
+           :
+           : "r" (0));
 #else
        asm("mcr        p15, 0, %0, c7, c5, 0   @ invalidate I-cache\n"
            :
index bff056489cc16198ffdd51dbacc6811ae0c6f4af..51662feb9f1dd03b8e1c8a3f7d208c063208aa89 100644 (file)
@@ -9,6 +9,8 @@
 #include <asm/ptrace.h>
 #include <asm/user.h>
 
+struct task_struct;
+
 typedef unsigned long elf_greg_t;
 typedef unsigned long elf_freg_t[3];
 
index bfcc15929a7fcd9833d4abc41e4f164645ccb133..540a044153a54ce1ffc8bed90a6bf7cee59631d8 100644 (file)
        "2:     strt    %0, [%2]\n"                             \
        "       mov     %0, #0\n"                               \
        "3:\n"                                                  \
-       "       .section __ex_table,\"a\"\n"                    \
+       "       .pushsection __ex_table,\"a\"\n"                \
        "       .align  3\n"                                    \
        "       .long   1b, 4f, 2b, 4f\n"                       \
-       "       .previous\n"                                    \
-       "       .section .fixup,\"ax\"\n"                       \
+       "       .popsection\n"                                  \
+       "       .pushsection .fixup,\"ax\"\n"                   \
        "4:     mov     %0, %4\n"                               \
        "       b       3b\n"                                   \
-       "       .previous"                                      \
+       "       .popsection"                                    \
        : "=&r" (ret), "=&r" (oldval)                           \
        : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT)              \
        : "cc", "memory")
@@ -102,14 +102,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
        "       it      eq      @ explicit IT needed for the 2b label\n"
        "2:     streqt  %2, [%3]\n"
        "3:\n"
-       "       .section __ex_table,\"a\"\n"
+       "       .pushsection __ex_table,\"a\"\n"
        "       .align  3\n"
        "       .long   1b, 4f, 2b, 4f\n"
-       "       .previous\n"
-       "       .section .fixup,\"ax\"\n"
+       "       .popsection\n"
+       "       .pushsection .fixup,\"ax\"\n"
        "4:     mov     %0, %4\n"
        "       b       3b\n"
-       "       .previous"
+       "       .popsection"
        : "=&r" (val)
        : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
        : "cc", "memory");
index 7be0978b2625c9e365fde3d28ca4679d1e9c4933..634f357be6bb787d8a578cfa90a99b7742529b19 100644 (file)
@@ -1,6 +1,23 @@
 #ifndef __ASMARM_SMP_TWD_H
 #define __ASMARM_SMP_TWD_H
 
+#define TWD_TIMER_LOAD                 0x00
+#define TWD_TIMER_COUNTER              0x04
+#define TWD_TIMER_CONTROL              0x08
+#define TWD_TIMER_INTSTAT              0x0C
+
+#define TWD_WDOG_LOAD                  0x20
+#define TWD_WDOG_COUNTER               0x24
+#define TWD_WDOG_CONTROL               0x28
+#define TWD_WDOG_INTSTAT               0x2C
+#define TWD_WDOG_RESETSTAT             0x30
+#define TWD_WDOG_DISABLE               0x34
+
+#define TWD_TIMER_CONTROL_ENABLE       (1 << 0)
+#define TWD_TIMER_CONTROL_ONESHOT      (0 << 1)
+#define TWD_TIMER_CONTROL_PERIODIC     (1 << 1)
+#define TWD_TIMER_CONTROL_IT_ENABLE    (1 << 2)
+
 struct clock_event_device;
 
 extern void __iomem *twd_base;
index e085e2c545ebabad792dfa6e25fb149eb3cada27..bd863d8608cd04013e76e9b6ebde8225e0c078d7 100644 (file)
@@ -46,6 +46,9 @@
 #define TLB_V7_UIS_FULL (1 << 20)
 #define TLB_V7_UIS_ASID (1 << 21)
 
+/* Inner Shareable BTB operation (ARMv7 MP extensions) */
+#define TLB_V7_IS_BTB  (1 << 22)
+
 #define TLB_L2CLEAN_FR (1 << 29)               /* Feroceon */
 #define TLB_DCLEAN     (1 << 30)
 #define TLB_WB         (1 << 31)
 #endif
 
 #ifdef CONFIG_SMP
-#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
+#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
                         TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
 #else
 #define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
@@ -339,6 +342,12 @@ static inline void local_flush_tlb_all(void)
                dsb();
                isb();
        }
+       if (tlb_flag(TLB_V7_IS_BTB)) {
+               /* flush the branch target cache */
+               asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+               dsb();
+               isb();
+       }
 }
 
 static inline void local_flush_tlb_mm(struct mm_struct *mm)
@@ -376,6 +385,12 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
                asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
                dsb();
        }
+       if (tlb_flag(TLB_V7_IS_BTB)) {
+               /* flush the branch target cache */
+               asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+               dsb();
+               isb();
+       }
 }
 
 static inline void
@@ -416,6 +431,12 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
                asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
                dsb();
        }
+       if (tlb_flag(TLB_V7_IS_BTB)) {
+               /* flush the branch target cache */
+               asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+               dsb();
+               isb();
+       }
 }
 
 static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
@@ -454,6 +475,12 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
                dsb();
                isb();
        }
+       if (tlb_flag(TLB_V7_IS_BTB)) {
+               /* flush the branch target cache */
+               asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc");
+               dsb();
+               isb();
+       }
 }
 
 /*
index 1d6bd40a4322e9d7196d96f5054f8d1bc6e1cd5b..33e4a48fe1037575d4d6e212000a8aa01303f7fc 100644 (file)
@@ -229,16 +229,16 @@ do {                                                                      \
        __asm__ __volatile__(                                   \
        "1:     ldrbt   %1,[%2]\n"                              \
        "2:\n"                                                  \
-       "       .section .fixup,\"ax\"\n"                       \
+       "       .pushsection .fixup,\"ax\"\n"                   \
        "       .align  2\n"                                    \
        "3:     mov     %0, %3\n"                               \
        "       mov     %1, #0\n"                               \
        "       b       2b\n"                                   \
-       "       .previous\n"                                    \
-       "       .section __ex_table,\"a\"\n"                    \
+       "       .popsection\n"                                  \
+       "       .pushsection __ex_table,\"a\"\n"                \
        "       .align  3\n"                                    \
        "       .long   1b, 3b\n"                               \
-       "       .previous"                                      \
+       "       .popsection"                                    \
        : "+r" (err), "=&r" (x)                                 \
        : "r" (addr), "i" (-EFAULT)                             \
        : "cc")
@@ -265,16 +265,16 @@ do {                                                                      \
        __asm__ __volatile__(                                   \
        "1:     ldrt    %1,[%2]\n"                              \
        "2:\n"                                                  \
-       "       .section .fixup,\"ax\"\n"                       \
+       "       .pushsection .fixup,\"ax\"\n"                   \
        "       .align  2\n"                                    \
        "3:     mov     %0, %3\n"                               \
        "       mov     %1, #0\n"                               \
        "       b       2b\n"                                   \
-       "       .previous\n"                                    \
-       "       .section __ex_table,\"a\"\n"                    \
+       "       .popsection\n"                                  \
+       "       .pushsection __ex_table,\"a\"\n"                \
        "       .align  3\n"                                    \
        "       .long   1b, 3b\n"                               \
-       "       .previous"                                      \
+       "       .popsection"                                    \
        : "+r" (err), "=&r" (x)                                 \
        : "r" (addr), "i" (-EFAULT)                             \
        : "cc")
@@ -310,15 +310,15 @@ do {                                                                      \
        __asm__ __volatile__(                                   \
        "1:     strbt   %1,[%2]\n"                              \
        "2:\n"                                                  \
-       "       .section .fixup,\"ax\"\n"                       \
+       "       .pushsection .fixup,\"ax\"\n"                   \
        "       .align  2\n"                                    \
        "3:     mov     %0, %3\n"                               \
        "       b       2b\n"                                   \
-       "       .previous\n"                                    \
-       "       .section __ex_table,\"a\"\n"                    \
+       "       .popsection\n"                                  \
+       "       .pushsection __ex_table,\"a\"\n"                \
        "       .align  3\n"                                    \
        "       .long   1b, 3b\n"                               \
-       "       .previous"                                      \
+       "       .popsection"                                    \
        : "+r" (err)                                            \
        : "r" (x), "r" (__pu_addr), "i" (-EFAULT)               \
        : "cc")
@@ -343,15 +343,15 @@ do {                                                                      \
        __asm__ __volatile__(                                   \
        "1:     strt    %1,[%2]\n"                              \
        "2:\n"                                                  \
-       "       .section .fixup,\"ax\"\n"                       \
+       "       .pushsection .fixup,\"ax\"\n"                   \
        "       .align  2\n"                                    \
        "3:     mov     %0, %3\n"                               \
        "       b       2b\n"                                   \
-       "       .previous\n"                                    \
-       "       .section __ex_table,\"a\"\n"                    \
+       "       .popsection\n"                                  \
+       "       .pushsection __ex_table,\"a\"\n"                \
        "       .align  3\n"                                    \
        "       .long   1b, 3b\n"                               \
-       "       .previous"                                      \
+       "       .popsection"                                    \
        : "+r" (err)                                            \
        : "r" (x), "r" (__pu_addr), "i" (-EFAULT)               \
        : "cc")
@@ -371,16 +371,16 @@ do {                                                                      \
  THUMB(        "1:     strt    " __reg_oper1 ", [%1]\n"        )       \
  THUMB(        "2:     strt    " __reg_oper0 ", [%1, #4]\n"    )       \
        "3:\n"                                                  \
-       "       .section .fixup,\"ax\"\n"                       \
+       "       .pushsection .fixup,\"ax\"\n"                   \
        "       .align  2\n"                                    \
        "4:     mov     %0, %3\n"                               \
        "       b       3b\n"                                   \
-       "       .previous\n"                                    \
-       "       .section __ex_table,\"a\"\n"                    \
+       "       .popsection\n"                                  \
+       "       .pushsection __ex_table,\"a\"\n"                \
        "       .align  3\n"                                    \
        "       .long   1b, 4b\n"                               \
        "       .long   2b, 4b\n"                               \
-       "       .previous"                                      \
+       "       .popsection"                                    \
        : "+r" (err), "+r" (__pu_addr)                          \
        : "r" (x), "i" (-EFAULT)                                \
        : "cc")
index 6c5cf369183b414dee5e8685be889cd646d77a7e..7ee48e7f8f318a7b453e12849b60a6832bb85770 100644 (file)
@@ -523,16 +523,16 @@ ENDPROC(__und_usr)
 /*
  * The out of line fixup for the ldrt above.
  */
-       .section .fixup, "ax"
+       .pushsection .fixup, "ax"
 4:     mov     pc, r9
-       .previous
-       .section __ex_table,"a"
+       .popsection
+       .pushsection __ex_table,"a"
        .long   1b, 4b
 #if __LINUX_ARM_ARCH__ >= 7
        .long   2b, 4b
        .long   3b, 4b
 #endif
-       .previous
+       .popsection
 
 /*
  * Check whether the instruction is a co-processor instruction.
@@ -676,10 +676,10 @@ do_fpe:
  *  lr  = unrecognised FP instruction return address
  */
 
-       .data
+       .pushsection .data
 ENTRY(fp_enter)
        .word   no_fp
-       .previous
+       .popsection
 
 ENTRY(no_fp)
        mov     pc, lr
index c638427662291c2fbd28d259b6121286d245d1d3..0298286ad4ad5971302a6690c5046e66826bccb2 100644 (file)
@@ -62,15 +62,15 @@ int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
                "    movne  %0, #2    \n"
                "3:\n"
 
-               ".section .fixup, \"ax\"\n"
+               ".pushsection .fixup, \"ax\"\n"
                "4:  mov  %0, #1  \n"
                "    b    3b      \n"
-               ".previous\n"
+               ".popsection\n"
 
-               ".section __ex_table, \"a\"\n"
+               ".pushsection __ex_table, \"a\"\n"
                "    .long 1b, 4b \n"
                "    .long 2b, 4b \n"
-               ".previous\n"
+               ".popsection\n"
 
                : "=r"(err), "=r"(replaced)
                : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
index 0e12e0acbf2624d07eac48f3e24a7d74979d38d1..acf5e6fdb6dcbe991d7bed5d63c7a77f38c16e34 100644 (file)
@@ -355,7 +355,7 @@ EXPORT_SYMBOL(dump_fpu);
  * the thread function, and r3 points to the exit function.
  */
 extern void kernel_thread_helper(void);
-asm(   ".section .text\n"
+asm(   ".pushsection .text\n"
 "      .align\n"
 "      .type   kernel_thread_helper, #function\n"
 "kernel_thread_helper:\n"
@@ -363,11 +363,11 @@ asm(      ".section .text\n"
 "      mov     lr, r3\n"
 "      mov     pc, r2\n"
 "      .size   kernel_thread_helper, . - kernel_thread_helper\n"
-"      .previous");
+"      .popsection");
 
 #ifdef CONFIG_ARM_UNWIND
 extern void kernel_thread_exit(long code);
-asm(   ".section .text\n"
+asm(   ".pushsection .text\n"
 "      .align\n"
 "      .type   kernel_thread_exit, #function\n"
 "kernel_thread_exit:\n"
@@ -377,7 +377,7 @@ asm(        ".section .text\n"
 "      nop\n"
 "      .fnend\n"
 "      .size   kernel_thread_exit, . - kernel_thread_exit\n"
-"      .previous");
+"      .popsection");
 #else
 #define kernel_thread_exit     do_exit
 #endif
index 577543f3857fa5c2c5d3d0a369a10eff8bb8847c..a01194e583ff8000587ae9b8887e35fc15e60c59 100644 (file)
@@ -86,6 +86,12 @@ int __cpuinit __cpu_up(unsigned int cpu)
                        return PTR_ERR(idle);
                }
                ci->idle = idle;
+       } else {
+               /*
+                * Since this idle thread is being re-used, call
+                * init_idle() to reinitialize the thread structure.
+                */
+               init_idle(idle, cpu);
        }
 
        /*
index ea02a7b1c244af0afd610f6fc00c7f836f72ae4d..7c5f0c024db7e468aba3a185bded3bf3fde7073a 100644 (file)
 #include <asm/smp_twd.h>
 #include <asm/hardware/gic.h>
 
-#define TWD_TIMER_LOAD                         0x00
-#define TWD_TIMER_COUNTER              0x04
-#define TWD_TIMER_CONTROL              0x08
-#define TWD_TIMER_INTSTAT              0x0C
-
-#define TWD_WDOG_LOAD                  0x20
-#define TWD_WDOG_COUNTER               0x24
-#define TWD_WDOG_CONTROL               0x28
-#define TWD_WDOG_INTSTAT               0x2C
-#define TWD_WDOG_RESETSTAT             0x30
-#define TWD_WDOG_DISABLE               0x34
-
-#define TWD_TIMER_CONTROL_ENABLE       (1 << 0)
-#define TWD_TIMER_CONTROL_ONESHOT      (0 << 1)
-#define TWD_TIMER_CONTROL_PERIODIC     (1 << 1)
-#define TWD_TIMER_CONTROL_IT_ENABLE    (1 << 2)
-
 /* set up by the platform code */
 void __iomem *twd_base;
 
index aaf7220d9e30bd0f4cab505bf0aa3b3d44edfa73..a673297b0cf14c39acbbfa27dd57a034e7b02410 100644 (file)
@@ -110,13 +110,13 @@ no_frame: ldmfd   sp!, {r4 - r8, pc}
 ENDPROC(__backtrace)
 ENDPROC(c_backtrace)
                
-               .section __ex_table,"a"
+               .pushsection __ex_table,"a"
                .align  3
                .long   1001b, 1006b
                .long   1002b, 1006b
                .long   1003b, 1006b
                .long   1004b, 1006b
-               .previous
+               .popsection
 
 #define instr r4
 #define reg   r5
index 1279abd8b886b94a30007dbb874d89747b69e564..14a0d988c82cb41ab88acd4d924bf75aa87efce3 100644 (file)
@@ -45,9 +45,10 @@ USER(                strnebt r2, [r0])
                mov     r0, #0
                ldmfd   sp!, {r1, pc}
 ENDPROC(__clear_user)
+ENDPROC(__clear_user_std)
 
-               .section .fixup,"ax"
+               .pushsection .fixup,"ax"
                .align  0
 9001:          ldmfd   sp!, {r0, pc}
-               .previous
+               .popsection
 
index e4fe124acedc80e94e2edc37b7123cc0ef56ae5e..66a477a3e3cc6b039c3d48e2ec4d42c57651626a 100644 (file)
@@ -90,7 +90,7 @@ ENTRY(__copy_from_user)
 
 ENDPROC(__copy_from_user)
 
-       .section .fixup,"ax"
+       .pushsection .fixup,"ax"
        .align 0
        copy_abort_preamble
        ldmfd   sp!, {r1, r2}
@@ -100,5 +100,5 @@ ENDPROC(__copy_from_user)
        bl      __memzero
        ldr     r0, [sp], #4
        copy_abort_end
-       .previous
+       .popsection
 
index 1a71e15844428dd6c68bf32ac1cfe3514d34e31b..d066df686e17877c9e5efbbd57e07615398f6a0a 100644 (file)
@@ -93,13 +93,14 @@ WEAK(__copy_to_user)
 #include "copy_template.S"
 
 ENDPROC(__copy_to_user)
+ENDPROC(__copy_to_user_std)
 
-       .section .fixup,"ax"
+       .pushsection .fixup,"ax"
        .align 0
        copy_abort_preamble
        ldmfd   sp!, {r1, r2, r3}
        sub     r0, r0, r1
        rsb     r0, r0, r2
        copy_abort_end
-       .previous
+       .popsection
 
index fd0e9dcd9fdc3243de42c38bb655112cfd3bdec4..59ff6fdc1e634835575846693fb0828a05c66a55 100644 (file)
@@ -68,7 +68,7 @@
  * so properly, we would have to add in whatever registers were loaded before
  * the fault, which, with the current asm above is not predictable.
  */
-               .section .fixup,"ax"
+               .pushsection .fixup,"ax"
                .align  4
 9001:          mov     r4, #-EFAULT
                ldr     r5, [fp, #4]            @ *err_ptr
@@ -80,4 +80,4 @@
                strneb  r0, [r1], #1
                bne     9002b
                load_regs
-               .previous
+               .popsection
index a1814d927122aaa3ac74d4f34e78a6c9f3c92367..b1631a7dbe750dc4615e8d76f535e48fb2a0c52d 100644 (file)
@@ -64,9 +64,9 @@ __get_user_bad:
        mov     pc, lr
 ENDPROC(__get_user_bad)
 
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
        .long   1b, __get_user_bad
        .long   2b, __get_user_bad
        .long   3b, __get_user_bad
        .long   4b, __get_user_bad
-.previous
+.popsection
index 02fedbf07c0d295cb192ce682bce65d503fe7d35..5a01a23c6c06f8315a571e93dde34a18dc744591 100644 (file)
@@ -81,11 +81,11 @@ __put_user_bad:
        mov     pc, lr
 ENDPROC(__put_user_bad)
 
-.section __ex_table, "a"
+.pushsection __ex_table, "a"
        .long   1b, __put_user_bad
        .long   2b, __put_user_bad
        .long   3b, __put_user_bad
        .long   4b, __put_user_bad
        .long   5b, __put_user_bad
        .long   6b, __put_user_bad
-.previous
+.popsection
index 1c9814f346c679b3ec708bbd47573033f34f8489..f202d7bd164785d51074b0d66ca5241948e05c99 100644 (file)
@@ -33,11 +33,11 @@ ENTRY(__strncpy_from_user)
        mov     pc, lr
 ENDPROC(__strncpy_from_user)
 
-       .section .fixup,"ax"
+       .pushsection .fixup,"ax"
        .align  0
 9001:  mov     r3, #0
        strb    r3, [r0, #0]    @ null terminate
        mov     r0, #-EFAULT
        mov     pc, lr
-       .previous
+       .popsection
 
index 7855b290665971f70cfe4ff1606787eb6ed4f941..0ecbb459c4f1e7c5c2b653db312291584ca10310 100644 (file)
@@ -33,8 +33,8 @@ ENTRY(__strnlen_user)
        mov     pc, lr
 ENDPROC(__strnlen_user)
 
-       .section .fixup,"ax"
+       .pushsection .fixup,"ax"
        .align  0
 9001:  mov     r0, #0
        mov     pc, lr
-       .previous
+       .popsection
index ffdd27498ceef69471f230317725ecea1951f111..fee9f6f88adb5eddf11f78ac8345423256381757 100644 (file)
@@ -279,10 +279,10 @@ USER(             strgtbt r3, [r0], #1)                   @ May fault
                b       .Lc2u_finished
 ENDPROC(__copy_to_user)
 
-               .section .fixup,"ax"
+               .pushsection .fixup,"ax"
                .align  0
 9001:          ldmfd   sp!, {r0, r4 - r7, pc}
-               .previous
+               .popsection
 
 /* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
  * Purpose  : copy a block from user memory to kernel memory
@@ -545,7 +545,7 @@ USER(               ldrgtbt r3, [r1], #1)                   @ May fault
                b       .Lcfu_finished
 ENDPROC(__copy_from_user)
 
-               .section .fixup,"ax"
+               .pushsection .fixup,"ax"
                .align  0
                /*
                 * We took an exception.  r0 contains a pointer to
@@ -559,5 +559,5 @@ ENDPROC(__copy_from_user)
                blne    __memzero
                mov     r0, r4
                ldmfd   sp!, {r4 - r7, pc}
-               .previous
+               .popsection
 
index 122e61a9f505a6e3142a8a203c765f879ad53802..e8cb982f5e8ebe932e4f2ba131e2a3812eea1bcd 100644 (file)
@@ -410,7 +410,7 @@ static struct clk_lookup da830_clks[] = {
        CLK("davinci-mcasp.0",  NULL,           &mcasp0_clk),
        CLK("davinci-mcasp.1",  NULL,           &mcasp1_clk),
        CLK("davinci-mcasp.2",  NULL,           &mcasp2_clk),
-       CLK("musb_hdrc",        NULL,           &usb20_clk),
+       CLK(NULL,               "usb20",        &usb20_clk),
        CLK(NULL,               "aemif",        &aemif_clk),
        CLK(NULL,               "aintc",        &aintc_clk),
        CLK(NULL,               "secu_mgr",     &secu_mgr_clk),
index 8f85f73b83a8a1b4a6e95f4070521c0bbd7d0d1d..1ee6ce4087b84cd001dce69600359a234a78102f 100644 (file)
@@ -16,6 +16,7 @@
 #include <linux/io.h>
 
 #include <asm/clkdev.h>
+#include <asm/div64.h>
 
 #include <mach/hardware.h>
 #include <mach/common.h>
index 811743c5614769d5fb283201fe77e5c606633d98..5f2ba8d9015cfce31a02f901e7f41742dd1e1fa9 100644 (file)
@@ -2,6 +2,7 @@
 #define _COLIBRI_H_
 
 #include <net/ax88796.h>
+#include <mach/mfp.h>
 
 /*
  * common settings for all modules
index 7515757d6911b152c249d32d7784bcbb61d769a1..3d8d8cb09685ca9113da07bb04ecf1f755ea71f2 100644 (file)
 #define __cpu_is_pxa950(id)                             \
        ({                                              \
                unsigned int _id = (id) >> 4 & 0xfff;   \
-               id == 0x697;                            \
+               _id == 0x697;                           \
         })
 #else
 #define __cpu_is_pxa950(id)    (0)
index 44b0b20b69a42d12d04599da5cbe84ee70fd58c7..c15c0c57de08d857c4a9bc60b67c9d6bfd8b41a8 100644 (file)
 #define U2DMACSR_BUSERRTYPE    (7 << 10)       /* PX Bus Error Type */
 #define U2DMACSR_EORINTR       (1 << 9)        /* End Of Receive */
 #define U2DMACSR_REQPEND       (1 << 8)        /* Request Pending */
-#define U2DMACSR_RASINTR       (1 << 4)        /* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR     (1 << 3)        /* Stop Interrupt (read only) */
+#define U2DMACSR_RASINTR       (1 << 4)        /* Request After Channel Stopped (read / write 1 clear) */
+#define U2DMACSR_STOPINTR      (1 << 3)        /* Stop Interrupt (read only) */
 #define U2DMACSR_ENDINTR       (1 << 2)        /* End Interrupt (read / write 1 clear) */
 #define U2DMACSR_STARTINTR     (1 << 1)        /* Start Interrupt (read / write 1 clear) */
 #define U2DMACSR_BUSERRINTR    (1 << 0)        /* Bus Error Interrupt (read / write 1 clear) */
index 44bb675e47f1f427e7e23cee1d53a14fd8aacac7..d12667bd9ebe94e8f6064414b5b8b090728b81be 100644 (file)
@@ -983,7 +983,7 @@ static void __init raumfeld_common_init(void)
                int i;
 
                for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
-                       if (!strcmp(gpio_keys_button[i].desc, "on/off button"))
+                       if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
                                gpio_keys_button[i].active_low = 1;
        }
 
@@ -1009,8 +1009,7 @@ static void __init raumfeld_common_init(void)
                gpio_direction_output(GPIO_W2W_PDN, 0);
 
        /* this can be used to switch off the device */
-       ret = gpio_request(GPIO_SHUTDOWN_SUPPLY,
-                               "supply shutdown");
+       ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
        if (ret < 0)
                pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
        else
index 19b5109d9808fae75972f6e1ac4b6250ec784ea7..01bdd7500df442edde598d1213dba9ca9402a83d 100644 (file)
@@ -363,7 +363,7 @@ static struct gpio_keys_button spitz_gpio_keys[] = {
                .type   = EV_PWR,
                .code   = KEY_SUSPEND,
                .gpio   = SPITZ_GPIO_ON_KEY,
-               .desc   = "On/Off",
+               .desc   = "On Off",
                .wakeup = 1,
        },
        /* Two buttons detecting the lid state */
index 9e0c5c3988a1f3fae23ee3dd585c135ab54e95a0..e90114a7e246ad4627db5ece88d0b2d159b677fa 100644 (file)
@@ -34,6 +34,7 @@
 #include <linux/pm.h>
 #include <linux/sched.h>
 #include <linux/gpio.h>
+#include <linux/jiffies.h>
 #include <linux/i2c-gpio.h>
 #include <linux/serial_8250.h>
 #include <linux/smc91x.h>
@@ -454,7 +455,7 @@ static struct i2c_gpio_platform_data i2c_bus_data = {
        .sda_pin = VIPER_RTC_I2C_SDA_GPIO,
        .scl_pin = VIPER_RTC_I2C_SCL_GPIO,
        .udelay  = 10,
-       .timeout = 100,
+       .timeout = HZ,
 };
 
 static struct platform_device i2c_bus_device = {
@@ -779,7 +780,7 @@ static void __init viper_tpm_init(void)
                .sda_pin = VIPER_TPM_I2C_SDA_GPIO,
                .scl_pin = VIPER_TPM_I2C_SCL_GPIO,
                .udelay  = 10,
-               .timeout = 100,
+               .timeout = HZ,
        };
        char *errstr;
 
index f2dbce5f3cd4dde9940b1efca6862a3c5a8baacc..d5a95738f85b027578e6f25ea9fffe216a023adf 100644 (file)
@@ -254,7 +254,7 @@ static unsigned int realview_mmc_status(struct device *dev)
        else
                mask = 2;
 
-       return readl(REALVIEW_SYSMCI) & mask;
+       return !(readl(REALVIEW_SYSMCI) & mask);
 }
 
 struct mmci_platform_data realview_mmc0_plat_data = {
index b17d52f7cc48739b2d02d24e690021c4e28d69fc..fd4c52b7ccb68a499f28514a2d6ad80d01810073 100644 (file)
@@ -57,7 +57,7 @@ config SA1100_COLLIE
 config SA1100_H3100
        bool "Compaq iPAQ H3100"
        select HTC_EGPIO
-       select CPU_FREQ_SA1100
+       select CPU_FREQ_SA1110
        help
          Say Y here if you intend to run this kernel on the Compaq iPAQ
          H3100 handheld computer.  Information about this machine and the
@@ -68,7 +68,7 @@ config SA1100_H3100
 config SA1100_H3600
        bool "Compaq iPAQ H3600/H3700"
        select HTC_EGPIO
-       select CPU_FREQ_SA1100
+       select CPU_FREQ_SA1110
        help
          Say Y here if you intend to run this kernel on the Compaq iPAQ
          H3600 handheld computer.  Information about this machine and the
index 63b32b68b296969e73638e2e370bcc7322049ac7..7252874d328b59eb808110351aabeff2e4a9c11d 100644 (file)
@@ -363,6 +363,9 @@ static int __init sa1110_clk_init(void)
        struct sdram_params *sdram;
        const char *name = sdram_name;
 
+       if (!cpu_is_sa1110())
+               return -ENODEV;
+
        if (!name[0]) {
                if (machine_is_assabet())
                        name = "TC59SM716-CL3";
index edddd66faac6bb9a1f08e8ca144b3677cb9fac3c..a2ab51fa73e2c1982df809af4750a19b124d227e 100644 (file)
@@ -166,15 +166,15 @@ union offset_union {
  THUMB(        "1:     "ins"   %1, [%2]\n"     )               \
  THUMB(        "       add     %2, %2, #1\n"   )               \
        "2:\n"                                          \
-       "       .section .fixup,\"ax\"\n"               \
+       "       .pushsection .fixup,\"ax\"\n"           \
        "       .align  2\n"                            \
        "3:     mov     %0, #1\n"                       \
        "       b       2b\n"                           \
-       "       .previous\n"                            \
-       "       .section __ex_table,\"a\"\n"            \
+       "       .popsection\n"                          \
+       "       .pushsection __ex_table,\"a\"\n"        \
        "       .align  3\n"                            \
        "       .long   1b, 3b\n"                       \
-       "       .previous\n"                            \
+       "       .popsection\n"                          \
        : "=r" (err), "=&r" (val), "=r" (addr)          \
        : "0" (err), "2" (addr))
 
@@ -226,16 +226,16 @@ union offset_union {
                "       mov     %1, %1, "NEXT_BYTE"\n"          \
                "2:     "ins"   %1, [%2]\n"                     \
                "3:\n"                                          \
-               "       .section .fixup,\"ax\"\n"               \
+               "       .pushsection .fixup,\"ax\"\n"           \
                "       .align  2\n"                            \
                "4:     mov     %0, #1\n"                       \
                "       b       3b\n"                           \
-               "       .previous\n"                            \
-               "       .section __ex_table,\"a\"\n"            \
+               "       .popsection\n"                          \
+               "       .pushsection __ex_table,\"a\"\n"        \
                "       .align  3\n"                            \
                "       .long   1b, 4b\n"                       \
                "       .long   2b, 4b\n"                       \
-               "       .previous\n"                            \
+               "       .popsection\n"                          \
                : "=r" (err), "=&r" (v), "=&r" (a)              \
                : "0" (err), "1" (v), "2" (a));                 \
                if (err)                                        \
@@ -266,18 +266,18 @@ union offset_union {
                "       mov     %1, %1, "NEXT_BYTE"\n"          \
                "4:     "ins"   %1, [%2]\n"                     \
                "5:\n"                                          \
-               "       .section .fixup,\"ax\"\n"               \
+               "       .pushsection .fixup,\"ax\"\n"           \
                "       .align  2\n"                            \
                "6:     mov     %0, #1\n"                       \
                "       b       5b\n"                           \
-               "       .previous\n"                            \
-               "       .section __ex_table,\"a\"\n"            \
+               "       .popsection\n"                          \
+               "       .pushsection __ex_table,\"a\"\n"        \
                "       .align  3\n"                            \
                "       .long   1b, 6b\n"                       \
                "       .long   2b, 6b\n"                       \
                "       .long   3b, 6b\n"                       \
                "       .long   4b, 6b\n"                       \
-               "       .previous\n"                            \
+               "       .popsection\n"                          \
                : "=r" (err), "=&r" (v), "=&r" (a)              \
                : "0" (err), "1" (v), "2" (a));                 \
                if (err)                                        \
index 9d89c67a1cc3902c32b5aed501d27f28b091695c..e46ecd8471383102b52e5c6475873f3f4bdfc65d 100644 (file)
@@ -211,6 +211,9 @@ v6_dma_inv_range:
        mcrne   p15, 0, r1, c7, c15, 1          @ clean & invalidate unified line
 #endif
 1:
+#ifdef CONFIG_SMP
+       str     r0, [r0]                        @ write for ownership
+#endif
 #ifdef HARVARD_CACHE
        mcr     p15, 0, r0, c7, c6, 1           @ invalidate D line
 #else
@@ -231,6 +234,9 @@ v6_dma_inv_range:
 v6_dma_clean_range:
        bic     r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
+#ifdef CONFIG_SMP
+       ldr     r2, [r0]                        @ read for ownership
+#endif
 #ifdef HARVARD_CACHE
        mcr     p15, 0, r0, c7, c10, 1          @ clean D line
 #else
@@ -251,6 +257,10 @@ v6_dma_clean_range:
 ENTRY(v6_dma_flush_range)
        bic     r0, r0, #D_CACHE_LINE_SIZE - 1
 1:
+#ifdef CONFIG_SMP
+       ldr     r2, [r0]                        @ read for ownership
+       str     r2, [r0]                        @ write for ownership
+#endif
 #ifdef HARVARD_CACHE
        mcr     p15, 0, r0, c7, c14, 1          @ clean & invalidate D line
 #else
@@ -273,7 +283,9 @@ ENTRY(v6_dma_map_area)
        add     r1, r1, r0
        teq     r2, #DMA_FROM_DEVICE
        beq     v6_dma_inv_range
-       b       v6_dma_clean_range
+       teq     r2, #DMA_TO_DEVICE
+       beq     v6_dma_clean_range
+       b       v6_dma_flush_range
 ENDPROC(v6_dma_map_area)
 
 /*
@@ -283,9 +295,6 @@ ENDPROC(v6_dma_map_area)
  *     - dir   - DMA direction
  */
 ENTRY(v6_dma_unmap_area)
-       add     r1, r1, r0
-       teq     r2, #DMA_TO_DEVICE
-       bne     v6_dma_inv_range
        mov     pc, lr
 ENDPROC(v6_dma_unmap_area)
 
index bcd64f265870804532dc6012274bca6e398a0622..06a90dcfc60a6f0cc0b88d5a02bfefdbfeb8610a 100644 (file)
@@ -167,7 +167,11 @@ ENTRY(v7_coherent_user_range)
        cmp     r0, r1
        blo     1b
        mov     r0, #0
+#ifdef CONFIG_SMP
+       mcr     p15, 0, r0, c7, c1, 6           @ invalidate BTB Inner Shareable
+#else
        mcr     p15, 0, r0, c7, c5, 6           @ invalidate BTB
+#endif
        dsb
        isb
        mov     pc, lr
index 83db12a68d569c95a3792cb87dcaea4d52478fbc..0ed29bfeba1cc0d6896fe3877e8653c26d1867f8 100644 (file)
@@ -86,9 +86,6 @@ void show_mem(void)
        printk("Mem-info:\n");
        show_free_areas();
        for_each_online_node(node) {
-               pg_data_t *n = NODE_DATA(node);
-               struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
                for_each_nodebank (i,mi,node) {
                        struct membank *bank = &mi->bank[i];
                        unsigned int pfn1, pfn2;
@@ -97,8 +94,8 @@ void show_mem(void)
                        pfn1 = bank_pfn_start(bank);
                        pfn2 = bank_pfn_end(bank);
 
-                       page = map + pfn1;
-                       end  = map + pfn2;
+                       page = pfn_to_page(pfn1);
+                       end  = pfn_to_page(pfn2 - 1) + 1;
 
                        do {
                                total++;
@@ -603,9 +600,6 @@ void __init mem_init(void)
        reserved_pages = free_pages = 0;
 
        for_each_online_node(node) {
-               pg_data_t *n = NODE_DATA(node);
-               struct page *map = pgdat_page_nr(n, 0) - n->node_start_pfn;
-
                for_each_nodebank(i, &meminfo, node) {
                        struct membank *bank = &meminfo.bank[i];
                        unsigned int pfn1, pfn2;
@@ -614,8 +608,8 @@ void __init mem_init(void)
                        pfn1 = bank_pfn_start(bank);
                        pfn2 = bank_pfn_end(bank);
 
-                       page = map + pfn1;
-                       end  = map + pfn2;
+                       page = pfn_to_page(pfn1);
+                       end  = pfn_to_page(pfn2 - 1) + 1;
 
                        do {
                                if (PageReserved(page))
index 9bfeb6b9509ad3480bd33a664e51b4f94311bfbb..33b327379f0756e14eff3d9f0cd23a2f022eb112 100644 (file)
@@ -65,6 +65,15 @@ void flush_dcache_page(struct page *page)
 }
 EXPORT_SYMBOL(flush_dcache_page);
 
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+                      unsigned long uaddr, void *dst, const void *src,
+                      unsigned long len)
+{
+       memcpy(dst, src, len);
+       if (vma->vm_flags & VM_EXEC)
+               __cpuc_coherent_user_range(uaddr, uaddr + len);
+}
+
 void __iomem *__arm_ioremap_pfn(unsigned long pfn, unsigned long offset,
                                size_t size, unsigned int mtype)
 {
@@ -87,8 +96,8 @@ void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
 }
 EXPORT_SYMBOL(__arm_ioremap);
 
-void __iomem *__arm_ioremap(unsigned long phys_addr, size_t size,
-                           unsigned int mtype, void *caller)
+void __iomem *__arm_ioremap_caller(unsigned long phys_addr, size_t size,
+                                  unsigned int mtype, void *caller)
 {
        return __arm_ioremap(phys_addr, size, mtype);
 }
index ee7700242c19567b94ad256984225c66d5e57872..5c47760c206437c0fbe7219aebae464b19929c7b 100644 (file)
@@ -45,7 +45,7 @@ ENTRY(cpu_sa1100_proc_init)
        mcr     p15, 0, r0, c9, c0, 5           @ Allow read-buffer operations from userland
        mov     pc, lr
 
-       .previous
+       .section .text
 
 /*
  * cpu_sa1100_proc_fin()
index 0cb1848bd876010a850edf2f9831cdf855f01c50..f3f288a9546d2a89f4f6d940c6387062ef8ff143 100644 (file)
@@ -50,7 +50,11 @@ ENTRY(v7wbi_flush_user_tlb_range)
        cmp     r0, r1
        blo     1b
        mov     ip, #0
+#ifdef CONFIG_SMP
+       mcr     p15, 0, ip, c7, c1, 6           @ flush BTAC/BTB Inner Shareable
+#else
        mcr     p15, 0, ip, c7, c5, 6           @ flush BTAC/BTB
+#endif
        dsb
        mov     pc, lr
 ENDPROC(v7wbi_flush_user_tlb_range)
@@ -79,7 +83,11 @@ ENTRY(v7wbi_flush_kern_tlb_range)
        cmp     r0, r1
        blo     1b
        mov     r2, #0
+#ifdef CONFIG_SMP
+       mcr     p15, 0, r2, c7, c1, 6           @ flush BTAC/BTB Inner Shareable
+#else
        mcr     p15, 0, r2, c7, c5, 6           @ flush BTAC/BTB
+#endif
        dsb
        isb
        mov     pc, lr
index 48bca0db4607d97a64b8ca26f75e18efc5d3f252..cafa1835433977808d47ce5900d85bbc19a3ea7f 100644 (file)
@@ -111,12 +111,12 @@ next:
        @ to fault.  Emit the appropriate exception gunk to fix things up.
        @ ??? For some reason, faults can happen at .Lx2 even with a
        @ plain LDR instruction.  Weird, but it seems harmless.
-       .section .fixup,"ax"
+       .pushsection .fixup,"ax"
        .align  2
 .Lfix: mov     pc, r9                  @ let the user eat segfaults
-       .previous
+       .popsection
 
-       .section __ex_table,"a"
+       .pushsection __ex_table,"a"
        .align  3
        .long   .Lx1, .Lfix
-       .previous
+       .popsection
index 07be8ad7ec37b90a322e59e7e6d7af34f04d0b42..7c4870bd5a2144e39697501ce4b85e42e1e36459 100644 (file)
 #define DMA_MODE_WRITE         1
 #define DMA_MODE_MASK          1
 
-#define DMA_BASE IO_ADDRESS(DMA_BASE_ADDR)
+#define MX1_DMA_REG(offset)    MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR + (offset))
+
+/* DMA Interrupt Mask Register */
+#define MX1_DMA_DIMR           MX1_DMA_REG(0x08)
+
+/* Channel Control Register */
+#define MX1_DMA_CCR(x)         MX1_DMA_REG(0x8c + ((x) << 6))
 
 #define IMX_DMA_MEMSIZE_32     (0 << 4)
 #define IMX_DMA_MEMSIZE_8      (1 << 4)
index 568578db93b659475d13935b09aa5df800c35cb8..876ca8d5e927315bcc107a8a766f3d2f89d35878 100644 (file)
@@ -46,7 +46,7 @@ struct ehci_hcd_omap_platform_data {
 struct omap_musb_board_data {
        u8      interface_type;
        u8      mode;
-       u     power;
+       u16     power;
 };
 
 enum musb_interface    {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI};
index 742350e0f2a77813651474815cd1f70bd09d46f2..2d3c19d7c7b1cd69a29c1796a913ee6e5a681c0c 100644 (file)
@@ -245,7 +245,7 @@ static void pxa_dma_init_debugfs(void)
 
        dbgfs_chan = kmalloc(sizeof(*dbgfs_state) * num_dma_channels,
                             GFP_KERNEL);
-       if (!dbgfs_state)
+       if (!dbgfs_chan)
                goto err_alloc;
 
        chandir = debugfs_create_dir("channels", dbgfs_root);
index 1536f1784cacba080d10c82e2900fe522c0ab4b1..8f10d24ae62540c5460eaf4b8e249c6ccd4ceac8 100644 (file)
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat Mar 20 15:35:41 2010
+# Last update: Sat May 1 10:36:42 2010
 #
 # machine_is_xxx       CONFIG_xxxx             MACH_TYPE_xxx           number
 #
@@ -2749,3 +2749,58 @@ stamp9g45                MACH_STAMP9G45          STAMP9G45               2761
 h6053                  MACH_H6053              H6053                   2762
 smint01                        MACH_SMINT01            SMINT01                 2763
 prtlvt2                        MACH_PRTLVT2            PRTLVT2                 2764
+ap420                  MACH_AP420              AP420                   2765
+htcshift               MACH_HTCSHIFT           HTCSHIFT                2766
+davinci_dm365_fc       MACH_DAVINCI_DM365_FC   DAVINCI_DM365_FC        2767
+msm8x55_surf           MACH_MSM8X55_SURF       MSM8X55_SURF            2768
+msm8x55_ffa            MACH_MSM8X55_FFA        MSM8X55_FFA             2769
+esl_vamana             MACH_ESL_VAMANA         ESL_VAMANA              2770
+sbc35                  MACH_SBC35              SBC35                   2771
+mpx6446                        MACH_MPX6446            MPX6446                 2772
+oreo_controller                MACH_OREO_CONTROLLER    OREO_CONTROLLER         2773
+kopin_models           MACH_KOPIN_MODELS       KOPIN_MODELS            2774
+ttc_vision2            MACH_TTC_VISION2        TTC_VISION2             2775
+cns3420vb              MACH_CNS3420VB          CNS3420VB               2776
+lpc2                   MACH_LPC2               LPC2                    2777
+olympus                        MACH_OLYMPUS            OLYMPUS                 2778
+vortex                 MACH_VORTEX             VORTEX                  2779
+s5pc200                        MACH_S5PC200            S5PC200                 2780
+ecucore_9263           MACH_ECUCORE_9263       ECUCORE_9263            2781
+smdkc200               MACH_SMDKC200           SMDKC200                2782
+emsiso_sx27            MACH_EMSISO_SX27        EMSISO_SX27             2783
+apx_som9g45_ek         MACH_APX_SOM9G45_EK     APX_SOM9G45_EK          2784
+songshan               MACH_SONGSHAN           SONGSHAN                2785
+tianshan               MACH_TIANSHAN           TIANSHAN                2786
+vpx500                 MACH_VPX500             VPX500                  2787
+am3517sam              MACH_AM3517SAM          AM3517SAM               2788
+skat91_sim508          MACH_SKAT91_SIM508      SKAT91_SIM508           2789
+skat91_s3e             MACH_SKAT91_S3E         SKAT91_S3E              2790
+omap4_panda            MACH_OMAP4_PANDA        OMAP4_PANDA             2791
+df7220                 MACH_DF7220             DF7220                  2792
+nemini                 MACH_NEMINI             NEMINI                  2793
+t8200                  MACH_T8200              T8200                   2794
+apf51                  MACH_APF51              APF51                   2795
+dr_rc_unit             MACH_DR_RC_UNIT         DR_RC_UNIT              2796
+bordeaux               MACH_BORDEAUX           BORDEAUX                2797
+catania_b              MACH_CATANIA_B          CATANIA_B               2798
+mx51_ocean             MACH_MX51_OCEAN         MX51_OCEAN              2799
+ti8168evm              MACH_TI8168EVM          TI8168EVM               2800
+neocoreomap            MACH_NEOCOREOMAP        NEOCOREOMAP             2801
+withings_wbp           MACH_WITHINGS_WBP       WITHINGS_WBP            2802
+dbps                   MACH_DBPS               DBPS                    2803
+sbc9261                        MACH_SBC9261            SBC9261                 2804
+pcbfp0001              MACH_PCBFP0001          PCBFP0001               2805
+speedy                 MACH_SPEEDY             SPEEDY                  2806
+chrysaor               MACH_CHRYSAOR           CHRYSAOR                2807
+tango                  MACH_TANGO              TANGO                   2808
+synology_dsx11         MACH_SYNOLOGY_DSX11     SYNOLOGY_DSX11          2809
+hanlin_v3ext           MACH_HANLIN_V3EXT       HANLIN_V3EXT            2810
+hanlin_v5              MACH_HANLIN_V5          HANLIN_V5               2811
+hanlin_v3plus          MACH_HANLIN_V3PLUS      HANLIN_V3PLUS           2812
+iriver_story           MACH_IRIVER_STORY       IRIVER_STORY            2813
+irex_iliad             MACH_IREX_ILIAD         IREX_ILIAD              2814
+irex_dr1000            MACH_IREX_DR1000        IREX_DR1000             2815
+teton_bga              MACH_TETON_BGA          TETON_BGA               2816
+snapper9g45            MACH_SNAPPER9G45        SNAPPER9G45             2817
+tam3517                        MACH_TAM3517            TAM3517                 2818
+pdc100                 MACH_PDC100             PDC100                  2819
index b131c27ddf5785883a1c28a3078cf6f1bd5a5c0e..bbce6a1c6bb67b873918a32fc68e9a6ea1e5890b 100644 (file)
@@ -19,7 +19,7 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define atomic_read(v)         ((v)->counter)
+#define atomic_read(v)         (*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)       (((v)->counter) = i)
 
 /*
index a6aca819e9f334050d6927146fa0a2941901c1e6..88dc9b9c4ba051f84988926c4ab304af8091bc27 100644 (file)
@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i)  { (i) }
 
-#define atomic_read(v) ((v)->counter)
+#define atomic_read(v) (*(volatile int *)&(v)->counter)
 #define atomic_set(v,i) (((v)->counter) = (i))
 
 /* These should be written in asm but we do it in C for now. */
index 00a57af79afc6b7d6d45fd1046dd96abdf35184b..fae32c7fdcb6619c487f3786993c70b6b0481788 100644 (file)
@@ -36,7 +36,7 @@
 #define smp_mb__after_atomic_inc()     barrier()
 
 #define ATOMIC_INIT(i)         { (i) }
-#define atomic_read(v)         ((v)->counter)
+#define atomic_read(v)         (*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)       (((v)->counter) = (i))
 
 #ifndef CONFIG_FRV_OUTOFLINE_ATOMIC_OPS
index 33c8c0fa9583e0c2794cf0950006d824da961778..e936804b7508758112b853bfca42f9992ebadb44 100644 (file)
@@ -10,7 +10,7 @@
 
 #define ATOMIC_INIT(i) { (i) }
 
-#define atomic_read(v)         ((v)->counter)
+#define atomic_read(v)         (*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)       (((v)->counter) = i)
 
 #include <asm/system.h>
index 88405cb0832ae88e48f2770e5d8af797d519a346..4e1948447a00834969be528f7ac2a6a681ba1b44 100644 (file)
@@ -21,8 +21,8 @@
 #define ATOMIC_INIT(i)         ((atomic_t) { (i) })
 #define ATOMIC64_INIT(i)       ((atomic64_t) { (i) })
 
-#define atomic_read(v)         ((v)->counter)
-#define atomic64_read(v)       ((v)->counter)
+#define atomic_read(v)         (*(volatile int *)&(v)->counter)
+#define atomic64_read(v)       (*(volatile long *)&(v)->counter)
 
 #define atomic_set(v,i)                (((v)->counter) = (i))
 #define atomic64_set(v,i)      (((v)->counter) = (i))
index 63f0cf0f50dde3949725305e42fa6472971c6f45..d44a51e5271b7b5b10a5d8610ce1076f4e536be5 100644 (file)
@@ -26,7 +26,7 @@
  *
  * Atomically reads the value of @v.
  */
-#define atomic_read(v) ((v)->counter)
+#define atomic_read(v) (*(volatile int *)&(v)->counter)
 
 /**
  * atomic_set - set atomic variable
index d9d2ed6474356f244dd5d585bc5840a5c16a9f99..6a223b3f7e74abe9faeed1345901171bca95a114 100644 (file)
@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i) { (i) }
 
-#define atomic_read(v)         ((v)->counter)
+#define atomic_read(v)         (*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)       (((v)->counter) = i)
 
 static inline void atomic_add(int i, atomic_t *v)
index 5674cb9449bd81278fa67e319a0b66abca0efd39..289310c63a8a5c361fe2f659205bd827b9889e7c 100644 (file)
@@ -15,7 +15,7 @@
 
 #define ATOMIC_INIT(i) { (i) }
 
-#define atomic_read(v)         ((v)->counter)
+#define atomic_read(v)         (*(volatile int *)&(v)->counter)
 #define atomic_set(v, i)       (((v)->counter) = i)
 
 static __inline__ void atomic_add(int i, atomic_t *v)
index 6fced1fe3bf06316fd7e3280d4a8b427128f7059..3c91cf6192c6a1603019d8477eeb14113611995e 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb  3 10:02:59 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May  6 11:22:14 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
 CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -56,7 +54,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -106,6 +103,8 @@ CONFIG_SLAB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -245,13 +244,20 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -341,7 +347,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
+CONFIG_OF_FLATTREE=y
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -370,6 +378,7 @@ CONFIG_MISC_DEVICES=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -383,9 +392,30 @@ CONFIG_NETDEVICES=y
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
 # CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_MICREL_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -394,6 +424,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851_MLL is not set
 CONFIG_XILINX_EMACLITE=y
@@ -444,6 +475,7 @@ CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -471,6 +503,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -502,6 +540,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -572,6 +611,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
+# CONFIG_LOGFS is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -595,6 +635,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 CONFIG_CIFS=y
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
@@ -696,6 +737,7 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_OBJECTS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -741,6 +783,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_HEART_BEAT is not set
@@ -862,5 +905,6 @@ CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
index ce2da535246a54df020ae48e053c2f8a2df1ff3f..dd3a494257f4330453b860edd1176aefac58c174 100644 (file)
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.33-rc6
-# Wed Feb  3 10:03:21 2010
+# Linux kernel version: 2.6.34-rc6
+# Thu May  6 11:25:12 2010
 #
 CONFIG_MICROBLAZE=y
 # CONFIG_SWAP is not set
@@ -22,8 +22,6 @@ CONFIG_GENERIC_CSUM=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-# CONFIG_PCI is not set
-CONFIG_NO_DMA=y
 CONFIG_DTC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 CONFIG_CONSTRUCTORS=y
@@ -58,7 +56,6 @@ CONFIG_RCU_FANOUT=32
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=17
-# CONFIG_GROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -96,6 +93,8 @@ CONFIG_SLAB=y
 # CONFIG_MMAP_ALLOW_UNINITIALIZED is not set
 # CONFIG_PROFILING is not set
 CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_API_DEBUG=y
 
 #
 # GCOV-based kernel profiling
@@ -209,11 +208,14 @@ CONFIG_PROC_DEVICETREE=y
 #
 # Advanced setup
 #
+# CONFIG_ADVANCED_OPTIONS is not set
 
 #
 # Default settings for advanced configuration options are used
 #
+CONFIG_LOWMEM_SIZE=0x30000000
 CONFIG_KERNEL_START=0x90000000
+CONFIG_TASK_SIZE=0x80000000
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -235,13 +237,20 @@ CONFIG_BINFMT_FLAT=y
 # CONFIG_BINFMT_SHARED_FLAT is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
+
+#
+# Bus Options
+#
+# CONFIG_PCI is not set
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_NET=y
 
 #
 # Networking options
 #
 CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -413,6 +422,7 @@ CONFIG_MTD_UCLINUX=y
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
+CONFIG_OF_FLATTREE=y
 CONFIG_OF_DEVICE=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
@@ -442,6 +452,7 @@ CONFIG_MISC_DEVICES=y
 #
 # SCSI device support
 #
+CONFIG_SCSI_MOD=y
 # CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
 # CONFIG_SCSI_DMA is not set
@@ -458,6 +469,7 @@ CONFIG_NETDEVICES=y
 # CONFIG_PHYLIB is not set
 CONFIG_NET_ETHERNET=y
 # CONFIG_MII is not set
+# CONFIG_ETHOC is not set
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -466,6 +478,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
 # CONFIG_KS8851_MLL is not set
 # CONFIG_XILINX_EMACLITE is not set
@@ -516,6 +529,7 @@ CONFIG_SERIAL_UARTLITE=y
 CONFIG_SERIAL_UARTLITE_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_TIMBERDALE is not set
 # CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
@@ -544,6 +558,12 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
 
 #
 # Multifunction device drivers
@@ -593,6 +613,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
 # CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -661,6 +682,7 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 # CONFIG_JFFS2_FS is not set
+# CONFIG_LOGFS is not set
 CONFIG_CRAMFS=y
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -689,6 +711,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
+# CONFIG_CEPH_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -733,6 +756,7 @@ CONFIG_DEBUG_OBJECTS_TIMERS=y
 # CONFIG_DEBUG_OBJECTS_WORK is not set
 CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1
 # CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -758,6 +782,7 @@ CONFIG_DEBUG_SG=y
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
@@ -782,6 +807,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_EARLY_PRINTK=y
 # CONFIG_HEART_BEAT is not set
@@ -901,5 +927,6 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
index e52210891d78ed167a71e24ca35c1cd9abee6bf4..4efe96a036f74a7ce058f563d44c21f46c0cc374 100644 (file)
@@ -15,7 +15,7 @@
 
 #include <asm/registers.h>
 
-#define L1_CACHE_SHIFT 2
+#define L1_CACHE_SHIFT 5
 /* word-granular cache in microblaze */
 #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
 
index 08c073badf198f3296b384742b98a31a1ab9b408..0d73d0c6de37c275341f4a8c050fc75cf61019fa 100644 (file)
 #define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
 #endif
 
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy     (0)
+#endif
+
 #endif /* _ASM_MICROBLAZE_DMA_H */
index 90731df9e574c30bd8684272be6f11250147997c..4c7b5d037c88ad8fd974cbe03cd660a630ee976d 100644 (file)
@@ -64,12 +64,6 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#ifdef CONFIG_MMU
-void __bug(const char *file, int line, void *data);
-int bad_trap(int trap_num, struct pt_regs *regs);
-int debug_trap(struct pt_regs *regs);
-#endif /* CONFIG_MMU */
-
 #if defined(CONFIG_KGDB)
 void (*debugger)(struct pt_regs *regs);
 int (*debugger_bpt)(struct pt_regs *regs);
index e45a6eea92e0e361b88f82c88ad6373007e9e9a6..00b5398d08c79336761eaaf9954d1c260597459a 100644 (file)
@@ -139,8 +139,6 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
 
 #ifdef CONFIG_MMU
 
-#define mm_ptov(addr)          ((void *)__phys_to_virt(addr))
-#define mm_vtop(addr)          ((unsigned long)__virt_to_phys(addr))
 #define phys_to_virt(addr)     ((void *)__phys_to_virt(addr))
 #define virt_to_phys(addr)     ((unsigned long)__virt_to_phys(addr))
 #define virt_to_bus(addr)      ((unsigned long)__virt_to_phys(addr))
index 2dd1d04129e029fc431d1f64d4e9598a44cd52ee..de493f86d28f7884b2adb7a625c0848a38aa6b74 100644 (file)
@@ -31,6 +31,9 @@
 
 #ifndef __ASSEMBLY__
 
+/* MS be sure that SLAB allocates aligned objects */
+#define ARCH_KMALLOC_MINALIGN  L1_CACHE_BYTES
+
 #define PAGE_UP(addr)  (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
 #define PAGE_DOWN(addr)        ((addr)&(~((PAGE_SIZE)-1)))
 
@@ -70,14 +73,7 @@ typedef unsigned long pte_basic_t;
 
 #endif /* CONFIG_MMU */
 
-#  ifndef CONFIG_MMU
-#  define copy_page(to, from)                  memcpy((to), (from), PAGE_SIZE)
-#  define get_user_page(vaddr)                 __get_free_page(GFP_KERNEL)
-#  define free_user_page(page, addr)           free_page(addr)
-#  else /* CONFIG_MMU */
-extern void copy_page(void *to, void *from);
-#  endif /* CONFIG_MMU */
-
+# define copy_page(to, from)                   memcpy((to), (from), PAGE_SIZE)
 # define clear_page(pgaddr)                    memset((pgaddr), 0, PAGE_SIZE)
 
 # define clear_user_page(pgaddr, vaddr, page)  memset((pgaddr), 0, PAGE_SIZE)
index bdd65aaee30d3d79d658fc3131382f71b3688854..5a388eeeb28fa3735912e741efb6389de28877c2 100644 (file)
@@ -94,14 +94,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus,
 
 #define HAVE_PCI_LEGACY        1
 
-/* pci_unmap_{page,single} is a nop so... */
-#define DECLARE_PCI_UNMAP_ADDR(ADDR_NAME)
-#define DECLARE_PCI_UNMAP_LEN(LEN_NAME)
-#define pci_unmap_addr(PTR, ADDR_NAME)         (0)
-#define pci_unmap_addr_set(PTR, ADDR_NAME, VAL)        do { } while (0)
-#define pci_unmap_len(PTR, LEN_NAME)           (0)
-#define pci_unmap_len_set(PTR, LEN_NAME, VAL)  do { } while (0)
-
 /* The PCI address space does equal the physical memory
  * address space (no IOMMU).  The IDE and SCSI device layers use
  * this boolean for bounce buffer decisions.
index f44b0d696fe2d9faef35887373163ec3d22e3e8d..c614a893f8a3d40179be89d162a2879bfff19db9 100644 (file)
@@ -108,21 +108,7 @@ extern inline void free_pgd_slow(pgd_t *pgd)
 #define pmd_alloc_one_fast(mm, address)        ({ BUG(); ((pmd_t *)1); })
 #define pmd_alloc_one(mm, address)     ({ BUG(); ((pmd_t *)2); })
 
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
-               unsigned long address)
-{
-       pte_t *pte;
-       extern void *early_get_page(void);
-       if (mem_init_done) {
-               pte = (pte_t *)__get_free_page(GFP_KERNEL |
-                                       __GFP_REPEAT | __GFP_ZERO);
-       } else {
-               pte = (pte_t *)early_get_page();
-               if (pte)
-                       clear_page(pte);
-       }
-       return pte;
-}
+extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
 
 static inline struct page *pte_alloc_one(struct mm_struct *mm,
                unsigned long address)
index dd2bb60651c7f3520b257df57f2b46940e9835d9..ca2d92871545821affe833848788e976b8c2f09a 100644 (file)
@@ -511,15 +511,6 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
-/*
- * When flushing the tlb entry for a page, we also need to flush the hash
- * table entry.  flush_hash_page is assembler (for speed) in hashtable.S.
- */
-extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
-/* Add an HPTE to the hash table */
-extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
-
 /*
  * Encode and decode a swap entry.
  * Note that the bits we use in a PTE for representing a swap entry
@@ -533,15 +524,7 @@ extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
 #define __pte_to_swp_entry(pte)        ((swp_entry_t) { pte_val(pte) >> 2 })
 #define __swp_entry_to_pte(x)  ((pte_t) { (x).val << 2 })
 
-
-/* CONFIG_APUS */
-/* For virtual address to physical address conversion */
-extern void cache_clear(__u32 addr, int length);
-extern void cache_push(__u32 addr, int length);
-extern int mm_end_of_chunk(unsigned long addr, int len);
 extern unsigned long iopa(unsigned long addr);
-/* extern unsigned long mm_ptov(unsigned long addr) \
-       __attribute__ ((const)); TBD */
 
 /* Values for nocacheflag and cmode */
 /* These are not used by the APUS kernel_map, but prevents
@@ -552,18 +535,6 @@ extern unsigned long iopa(unsigned long addr);
 #define        IOMAP_NOCACHE_NONSER    2
 #define        IOMAP_NO_COPYBACK       3
 
-/*
- * Map some physical address range into the kernel address space.
- */
-extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
-                               int nocacheflag, unsigned long *memavailp);
-
-/*
- * Set cache mode of (kernel space) address range.
- */
-extern void kernel_set_cachemode(unsigned long address, unsigned long size,
-                               unsigned int cmode);
-
 /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
 #define kern_addr_valid(addr)  (1)
 
@@ -577,10 +548,6 @@ extern void kernel_set_cachemode(unsigned long address, unsigned long size,
 void do_page_fault(struct pt_regs *regs, unsigned long address,
                   unsigned long error_code);
 
-void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
-                            unsigned int size, int flags);
-
-void __init adjust_total_lowmem(void);
 void mapin_ram(void);
 int map_page(unsigned long va, phys_addr_t pa, int flags);
 
@@ -601,7 +568,7 @@ void __init *early_get_page(void);
 extern unsigned long ioremap_bot, ioremap_base;
 
 void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
-void consistent_free(void *vaddr);
+void consistent_free(size_t size, void *vaddr);
 void consistent_sync(void *vaddr, size_t size, int direction);
 void consistent_sync_page(struct page *page, unsigned long offset,
        size_t size, int direction);
index 446bec29b142bc5509a445f28146c166c756cb11..26460d15b338b65847bef4bd1925ca5a8ea40dff 100644 (file)
@@ -182,6 +182,39 @@ extern long __user_bad(void);
  * Returns zero on success, or -EFAULT on error.
  * On error, the variable @x is set to zero.
  */
+#define get_user(x, ptr)                                               \
+       __get_user_check((x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_check(x, ptr, size)                                 \
+({                                                                     \
+       unsigned long __gu_val = 0;                                     \
+       const typeof(*(ptr)) __user *__gu_addr = (ptr);                 \
+       int __gu_err = 0;                                               \
+                                                                       \
+       if (access_ok(VERIFY_READ, __gu_addr, size)) {                  \
+               switch (size) {                                         \
+               case 1:                                                 \
+                       __get_user_asm("lbu", __gu_addr, __gu_val,      \
+                                      __gu_err);                       \
+                       break;                                          \
+               case 2:                                                 \
+                       __get_user_asm("lhu", __gu_addr, __gu_val,      \
+                                      __gu_err);                       \
+                       break;                                          \
+               case 4:                                                 \
+                       __get_user_asm("lw", __gu_addr, __gu_val,       \
+                                      __gu_err);                       \
+                       break;                                          \
+               default:                                                \
+                       __gu_err = __user_bad();                        \
+                       break;                                          \
+               }                                                       \
+       } else {                                                        \
+               __gu_err = -EFAULT;                                     \
+       }                                                               \
+       x = (typeof(*(ptr)))__gu_val;                                   \
+       __gu_err;                                                       \
+})
 
 #define __get_user(x, ptr)                                             \
 ({                                                                     \
@@ -206,12 +239,6 @@ extern long __user_bad(void);
 })
 
 
-#define get_user(x, ptr)                                               \
-({                                                                     \
-       access_ok(VERIFY_READ, (ptr), sizeof(*(ptr)))                   \
-               ? __get_user((x), (ptr)) : -EFAULT;                     \
-})
-
 #define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err)     \
 ({                                                             \
        __asm__ __volatile__ (                                  \
@@ -266,6 +293,42 @@ extern long __user_bad(void);
  *
  * Returns zero on success, or -EFAULT on error.
  */
+#define put_user(x, ptr)                                               \
+       __put_user_check((x), (ptr), sizeof(*(ptr)))
+
+#define __put_user_check(x, ptr, size)                                 \
+({                                                                     \
+       typeof(*(ptr)) __pu_val;                                        \
+       typeof(*(ptr)) __user *__pu_addr = (ptr);                       \
+       int __pu_err = 0;                                               \
+                                                                       \
+       __pu_val = (x);                                                 \
+       if (access_ok(VERIFY_WRITE, __pu_addr, size)) {                 \
+               switch (size) {                                         \
+               case 1:                                                 \
+                       __put_user_asm("sb", __pu_addr, __pu_val,       \
+                                      __pu_err);                       \
+                       break;                                          \
+               case 2:                                                 \
+                       __put_user_asm("sh", __pu_addr, __pu_val,       \
+                                      __pu_err);                       \
+                       break;                                          \
+               case 4:                                                 \
+                       __put_user_asm("sw", __pu_addr, __pu_val,       \
+                                      __pu_err);                       \
+                       break;                                          \
+               case 8:                                                 \
+                       __put_user_asm_8(__pu_addr, __pu_val, __pu_err);\
+                       break;                                          \
+               default:                                                \
+                       __pu_err = __user_bad();                        \
+                       break;                                          \
+               }                                                       \
+       } else {                                                        \
+               __pu_err = -EFAULT;                                     \
+       }                                                               \
+       __pu_err;                                                       \
+})
 
 #define __put_user(x, ptr)                                             \
 ({                                                                     \
@@ -290,18 +353,6 @@ extern long __user_bad(void);
        __gu_err;                                                       \
 })
 
-#ifndef CONFIG_MMU
-
-#define put_user(x, ptr)       __put_user((x), (ptr))
-
-#else /* CONFIG_MMU */
-
-#define put_user(x, ptr)                                               \
-({                                                                     \
-       access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr)))                  \
-               ? __put_user((x), (ptr)) : -EFAULT;                     \
-})
-#endif /* CONFIG_MMU */
 
 /* copy_to_from_user */
 #define __copy_from_user(to, from, n)  \
index 0071260a672cfb0bc0f7ac4d7e2b865269d5082b..c1b459c9757161ae56a8188e48cbedf307d077ad 100644 (file)
@@ -16,6 +16,7 @@
 #include <linux/hardirq.h>
 #include <linux/thread_info.h>
 #include <linux/kbuild.h>
+#include <asm/cpuinfo.h>
 
 int main(int argc, char *argv[])
 {
index f04d8a86dead0c6d45bf574680aacb242ef1fdf6..109876e8d643a3b51eb41a91e7fc8adb9e1a5ec9 100644 (file)
@@ -96,13 +96,16 @@ static inline void __disable_dcache_nomsr(void)
 }
 
 
-/* Helper macro for computing the limits of cache range loops */
+/* Helper macro for computing the limits of cache range loops
+ *
+ * End address can be unaligned which is OK for C implementation.
+ * ASM implementation align it in ASM macros
+ */
 #define CACHE_LOOP_LIMITS(start, end, cache_line_length, cache_size)   \
 do {                                                                   \
        int align = ~(cache_line_length - 1);                           \
        end = min(start + cache_size, end);                             \
        start &= align;                                                 \
-       end = ((end & align) + cache_line_length);                      \
 } while (0);
 
 /*
@@ -111,9 +114,9 @@ do {                                                                        \
  */
 #define CACHE_ALL_LOOP(cache_size, line_length, op)                    \
 do {                                                                   \
-       unsigned int len = cache_size;                                  \
+       unsigned int len = cache_size - line_length;                    \
        int step = -line_length;                                        \
-       BUG_ON(step >= 0);                                              \
+       WARN_ON(step >= 0);                                             \
                                                                        \
        __asm__ __volatile__ (" 1:      " #op " %0, r0;                 \
                                        bgtid   %0, 1b;                 \
@@ -122,26 +125,22 @@ do {                                                                      \
                                        : "memory");                    \
 } while (0);
 
-
-#define CACHE_ALL_LOOP2(cache_size, line_length, op)                   \
-do {                                                                   \
-       unsigned int len = cache_size;                                  \
-       int step = -line_length;                                        \
-       BUG_ON(step >= 0);                                              \
-                                                                       \
-       __asm__ __volatile__ (" 1:      " #op " r0, %0;                 \
-                                       bgtid   %0, 1b;                 \
-                                       addk    %0, %0, %1;             \
-                                       " : : "r" (len), "r" (step)     \
-                                       : "memory");                    \
-} while (0);
-
-/* for wdc.flush/clear */
+/* Used for wdc.flush/clear which can use rB for offset which is not possible
+ * to use for simple wdc or wic.
+ *
+ * start address is cache aligned
+ * end address is not aligned, if end is aligned then I have to substract
+ * cacheline length because I can't flush/invalidate the next cacheline.
+ * If is not, I align it because I will flush/invalidate whole line.
+ */
 #define CACHE_RANGE_LOOP_2(start, end, line_length, op)                        \
 do {                                                                   \
        int step = -line_length;                                        \
-       int count = end - start;                                        \
-       BUG_ON(count <= 0);                                             \
+       int align = ~(line_length - 1);                                 \
+       int count;                                                      \
+       end = ((end & align) == end) ? end - line_length : end & align; \
+       count = end - start;                                            \
+       WARN_ON(count < 0);                                             \
                                                                        \
        __asm__ __volatile__ (" 1:      " #op " %0, %1;                 \
                                        bgtid   %1, 1b;                 \
@@ -154,7 +153,9 @@ do {                                                                        \
 #define CACHE_RANGE_LOOP_1(start, end, line_length, op)                        \
 do {                                                                   \
        int volatile temp;                                              \
-       BUG_ON(end - start <= 0);                                       \
+       int align = ~(line_length - 1);                                 \
+       end = ((end & align) == end) ? end - line_length : end & align; \
+       WARN_ON(end - start < 0);                                       \
                                                                        \
        __asm__ __volatile__ (" 1:      " #op " %1, r0;                 \
                                        cmpu    %0, %1, %2;             \
@@ -360,8 +361,12 @@ static void __invalidate_dcache_all_noirq_wt(void)
 #endif
 }
 
-/* FIXME this is weird - should be only wdc but not work
- * MS: I am getting bus errors and other weird things */
+/* FIXME It is blindly invalidation as is expected
+ * but can't be called on noMMU in microblaze_cache_init below
+ *
+ * MS: noMMU kernel won't boot if simple wdc is used
+ * The reason should be that there are discared data which kernel needs
+ */
 static void __invalidate_dcache_all_wb(void)
 {
 #ifndef ASM_LOOP
@@ -369,12 +374,12 @@ static void __invalidate_dcache_all_wb(void)
 #endif
        pr_debug("%s\n", __func__);
 #ifdef ASM_LOOP
-       CACHE_ALL_LOOP2(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
-                                       wdc.clear)
+       CACHE_ALL_LOOP(cpuinfo.dcache_size, cpuinfo.dcache_line_length,
+                                       wdc)
 #else
        for (i = 0; i < cpuinfo.dcache_size;
                 i += cpuinfo.dcache_line_length)
-                       __asm__ __volatile__ ("wdc.clear        %0, r0;" \
+                       __asm__ __volatile__ ("wdc      %0, r0;" \
                                        : : "r" (i));
 #endif
 }
@@ -393,7 +398,7 @@ static void __invalidate_dcache_range_wb(unsigned long start,
 #ifdef ASM_LOOP
        CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.clear);
 #else
-       for (i = start; i < end; i += cpuinfo.icache_line_length)
+       for (i = start; i < end; i += cpuinfo.dcache_line_length)
                __asm__ __volatile__ ("wdc.clear        %0, r0;"        \
                                : : "r" (i));
 #endif
@@ -413,7 +418,7 @@ static void __invalidate_dcache_range_nomsr_wt(unsigned long start,
 #ifdef ASM_LOOP
        CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
 #else
-       for (i = start; i < end; i += cpuinfo.icache_line_length)
+       for (i = start; i < end; i += cpuinfo.dcache_line_length)
                __asm__ __volatile__ ("wdc      %0, r0;"        \
                                : : "r" (i));
 #endif
@@ -437,7 +442,7 @@ static void __invalidate_dcache_range_msr_irq_wt(unsigned long start,
 #ifdef ASM_LOOP
        CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
 #else
-       for (i = start; i < end; i += cpuinfo.icache_line_length)
+       for (i = start; i < end; i += cpuinfo.dcache_line_length)
                __asm__ __volatile__ ("wdc      %0, r0;"        \
                                : : "r" (i));
 #endif
@@ -465,7 +470,7 @@ static void __invalidate_dcache_range_nomsr_irq(unsigned long start,
 #ifdef ASM_LOOP
        CACHE_RANGE_LOOP_1(start, end, cpuinfo.dcache_line_length, wdc);
 #else
-       for (i = start; i < end; i += cpuinfo.icache_line_length)
+       for (i = start; i < end; i += cpuinfo.dcache_line_length)
                __asm__ __volatile__ ("wdc      %0, r0;"        \
                                : : "r" (i));
 #endif
@@ -504,7 +509,7 @@ static void __flush_dcache_range_wb(unsigned long start, unsigned long end)
 #ifdef ASM_LOOP
        CACHE_RANGE_LOOP_2(start, end, cpuinfo.dcache_line_length, wdc.flush);
 #else
-       for (i = start; i < end; i += cpuinfo.icache_line_length)
+       for (i = start; i < end; i += cpuinfo.dcache_line_length)
                __asm__ __volatile__ ("wdc.flush        %0, r0;"        \
                                : : "r" (i));
 #endif
@@ -650,7 +655,11 @@ void microblaze_cache_init(void)
                        }
                }
        }
-       invalidate_dcache();
+/* FIXME Invalidation is done in U-BOOT
+ * WT cache: Data is already written to main memory
+ * WB cache: Discard data on noMMU which caused that kernel doesn't boot
+ */
+       /* invalidate_dcache(); */
        enable_dcache();
 
        invalidate_icache();
index 0c912b2a8e03ae72c1073ff94185595f18a3ab68..4216eb1eaa326a84e4fa2d776ad522d001217d29 100644 (file)
@@ -98,15 +98,17 @@ static int show_cpuinfo(struct seq_file *m, void *v)
 
        if (cpuinfo.use_icache)
                count += seq_printf(m,
-                               "Icache:\t\t%ukB\n",
-                               cpuinfo.icache_size >> 10);
+                               "Icache:\t\t%ukB\tline length:\t%dB\n",
+                               cpuinfo.icache_size >> 10,
+                               cpuinfo.icache_line_length);
        else
                count += seq_printf(m, "Icache:\t\tno\n");
 
        if (cpuinfo.use_dcache) {
                count += seq_printf(m,
-                               "Dcache:\t\t%ukB\n",
-                               cpuinfo.dcache_size >> 10);
+                               "Dcache:\t\t%ukB\tline length:\t%dB\n",
+                               cpuinfo.dcache_size >> 10,
+                               cpuinfo.dcache_line_length);
                if (cpuinfo.dcache_wb)
                        count += seq_printf(m, "\t\twrite-back\n");
                else
index ce72dd4967cfe2085ada81f60e54f3c55ee4c2e7..9dcd90b5df55bdf08cd869fba62f56219797c555 100644 (file)
@@ -74,7 +74,7 @@ static void dma_direct_free_coherent(struct device *dev, size_t size,
                              void *vaddr, dma_addr_t dma_handle)
 {
 #ifdef NOT_COHERENT_CACHE
-       consistent_free(vaddr);
+       consistent_free(size, vaddr);
 #else
        free_pages((unsigned long)vaddr, get_order(size));