include/linux/version.h
include/linux/utsrelease.h
include/linux/bounds.h
+include/generated
# stgit generated dirs
patches-*
-What: /debug/pktcdvd/pktcdvd[0-7]
+What: /sys/kernel/debug/pktcdvd/pktcdvd[0-7]
Date: Oct. 2006
KernelVersion: 2.6.20
Contact: Thomas Maier <balagi@justmail.de>
The pktcdvd module (packet writing driver) creates
these files in debugfs:
-/debug/pktcdvd/pktcdvd[0-7]/
+/sys/kernel/debug/pktcdvd/pktcdvd[0-7]/
info (0444) Lots of driver statistics and infos.
Example:
-------
-cat /debug/pktcdvd/pktcdvd0/info
+cat /sys/kernel/debug/pktcdvd/pktcdvd0/info
gpe1F: 0 invalid
gpe_all: 1192
sci: 1194
+ sci_not: 0
- sci - The total number of times the ACPI SCI
- has claimed an interrupt.
+ sci - The number of times the ACPI SCI
+ has been called and claimed an interrupt.
+
+ sci_not - The number of times the ACPI SCI
+ has been called and NOT claimed an interrupt.
gpe_all - count of SCI caused by GPEs.
$(call cmd,db2pdf)
-main_idx = Documentation/DocBook/index.html
+index = index.html
+main_idx = Documentation/DocBook/$(index)
build_main_index = rm -rf $(main_idx) && \
echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
$(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
$(patsubst %.xml, %.html, $(DOCBOOKS)) \
$(patsubst %.xml, %.9, $(DOCBOOKS)) \
- $(C-procfs-example)
+ $(C-procfs-example) $(index)
clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
!Edrivers/pci/pci.c
!Edrivers/pci/pci-driver.c
!Edrivers/pci/remove.c
-!Edrivers/pci/pci-acpi.c
!Edrivers/pci/search.c
!Edrivers/pci/msi.c
!Edrivers/pci/bus.c
+!Edrivers/pci/access.c
+!Edrivers/pci/irq.c
+!Edrivers/pci/htirq.c
<!-- FIXME: Removed for now since no structured comments in source
X!Edrivers/pci/hotplug.c
-->
!Edrivers/pci/probe.c
+!Edrivers/pci/slot.c
!Edrivers/pci/rom.c
!Edrivers/pci/iov.c
+!Idrivers/pci/pci-sysfs.c
</sect1>
<sect1><title>PCI Hotplug Support Library</title>
!Edrivers/pci/hotplug/pci_hotplug_core.c
seriously wrong while debugging, it will most often be the case
that you want to enable gdb to be verbose about its target
communications. You do this prior to issuing the <constant>target
- remote</constant> command by typing in: <constant>set remote debug 1</constant>
+ remote</constant> command by typing in: <constant>set debug remote 1</constant>
</para>
</chapter>
<chapter id="KGDBTestSuite">
iii. Plugging the queue to batch requests in anticipation of opportunities for
merge/sort optimizations
-This is just the same as in 2.4 so far, though per-device unplugging
-support is anticipated for 2.5. Also with a priority-based i/o scheduler,
-such decisions could be based on request priorities.
-
Plugging is an approach that the current i/o scheduling algorithm resorts to so
that it collects up enough requests in the queue to be able to take
advantage of the sorting/merging logic in the elevator. If the
queue is empty when a request comes in, then it plugs the request queue
-(sort of like plugging the bottom of a vessel to get fluid to build up)
+(sort of like plugging the bath tub of a vessel to get fluid to build up)
till it fills up with a few more requests, before starting to service
the requests. This provides an opportunity to merge/sort the requests before
passing them down to the device. There are various conditions when the queue is
unplugged (to open up the flow again), either through a scheduled task or
could be on demand. For example wait_on_buffer sets the unplugging going
-(by running tq_disk) so the read gets satisfied soon. So in the read case,
-the queue gets explicitly unplugged as part of waiting for completion,
-in fact all queues get unplugged as a side-effect.
+through sync_buffer() running blk_run_address_space(mapping). Or the caller
+can do it explicity through blk_unplug(bdev). So in the read case,
+the queue gets explicitly unplugged as part of waiting for completion on that
+buffer. For page driven IO, the address space ->sync_page() takes care of
+doing the blk_run_address_space().
Aside:
This is kind of controversial territory, as it's not clear if plugging is
multi-page bios being queued in one shot, we may not need to wait to merge
a big request from the broken up pieces coming by.
- Per-queue granularity unplugging (still a Todo) may help reduce some of the
- concerns with just a single tq_disk flush approach. Something like
- blk_kick_queue() to unplug a specific queue (right away ?)
- or optionally, all queues, is in the plan.
-
4.4 I/O contexts
I/O contexts provide a dynamically allocated per process data area. They may
be used in I/O schedulers, and in the block layer (could be used for IO statis,
Salient features
-a. Enable control of both RSS (mapped) and Page Cache (unmapped) pages
+a. Enable control of Anonymous, Page Cache (mapped and unmapped) and
+ Swap Cache memory pages.
b. The infrastructure allows easy addition of other types of memory to control
c. Provides *zero overhead* for non memory controller users
d. Provides a double LRU: global memory pressure causes reclaim from the
global LRU; a cgroup on hitting a limit, reclaims from the per
cgroup LRU
-NOTE: Swap Cache (unmapped) is not accounted now.
-
Benefits and Purpose of the memory controller
The memory controller isolates the memory behaviour of a group of tasks
moved to the parent. If you want to avoid that, force_empty will be useful.
5.2 stat file
- memory.stat file includes following statistics (now)
- cache - # of pages from page-cache and shmem.
- rss - # of pages from anonymous memory.
- pgpgin - # of event of charging
- pgpgout - # of event of uncharging
- active_anon - # of pages on active lru of anon, shmem.
- inactive_anon - # of pages on active lru of anon, shmem
- active_file - # of pages on active lru of file-cache
- inactive_file - # of pages on inactive lru of file cache
- unevictable - # of pages cannot be reclaimed.(mlocked etc)
-
- Below is depend on CONFIG_DEBUG_VM.
- inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
- recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
- recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
- recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
- recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
-
- Memo:
+
+memory.stat file includes following statistics
+
+cache - # of bytes of page cache memory.
+rss - # of bytes of anonymous and swap cache memory.
+pgpgin - # of pages paged in (equivalent to # of charging events).
+pgpgout - # of pages paged out (equivalent to # of uncharging events).
+active_anon - # of bytes of anonymous and swap cache memory on active
+ lru list.
+inactive_anon - # of bytes of anonymous memory and swap cache memory on
+ inactive lru list.
+active_file - # of bytes of file-backed memory on active lru list.
+inactive_file - # of bytes of file-backed memory on inactive lru list.
+unevictable - # of bytes of memory that cannot be reclaimed (mlocked etc).
+
+The following additional stats are dependent on CONFIG_DEBUG_VM.
+
+inactive_ratio - VM internal parameter. (see mm/page_alloc.c)
+recent_rotated_anon - VM internal parameter. (see mm/vmscan.c)
+recent_rotated_file - VM internal parameter. (see mm/vmscan.c)
+recent_scanned_anon - VM internal parameter. (see mm/vmscan.c)
+recent_scanned_file - VM internal parameter. (see mm/vmscan.c)
+
+Memo:
recent_rotated means recent frequency of lru rotation.
recent_scanned means recent # of scans to lru.
showing for better debug please see the code for meanings.
+Note:
+ Only anonymous and swap cache memory is listed as part of 'rss' stat.
+ This should not be confused with the true 'resident set size' or the
+ amount of physical memory used by the cgroup. Per-cgroup rss
+ accounting is not done yet.
5.3 swappiness
Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
- Following cgroup's swapiness can't be changed.
+ Following cgroups' swapiness can't be changed.
- root cgroup (uses /proc/sys/vm/swappiness).
- a cgroup which uses hierarchy and it has child cgroup.
- a cgroup which uses hierarchy and not the root of hierarchy.
2. Basic accounting routines
- a. void res_counter_init(struct res_counter *rc)
+ a. void res_counter_init(struct res_counter *rc,
+ struct res_counter *rc_parent)
Initializes the resource counter. As usual, should be the first
routine called for a new counter.
- b. int res_counter_charge[_locked]
- (struct res_counter *rc, unsigned long val)
+ The struct res_counter *parent can be used to define a hierarchical
+ child -> parent relationship directly in the res_counter structure,
+ NULL can be used to define no relationship.
+
+ c. int res_counter_charge(struct res_counter *rc, unsigned long val,
+ struct res_counter **limit_fail_at)
When a resource is about to be allocated it has to be accounted
with the appropriate resource counter (controller should determine
* if the charging is performed first, then it should be uncharged
on error path (if the one is called).
- c. void res_counter_uncharge[_locked]
+ If the charging fails and a hierarchical dependency exists, the
+ limit_fail_at parameter is set to the particular res_counter element
+ where the charging failed.
+
+ d. int res_counter_charge_locked
+ (struct res_counter *rc, unsigned long val)
+
+ The same as res_counter_charge(), but it must not acquire/release the
+ res_counter->lock internally (it must be called with res_counter->lock
+ held).
+
+ e. void res_counter_uncharge[_locked]
(struct res_counter *rc, unsigned long val)
When a resource is released (freed) it should be de-accounted
from the resource counter it was accounted to. This is called
"uncharging".
- The _locked routines imply that the res_counter->lock is taken.
-
+ The _locked routines imply that the res_counter->lock is taken.
2.1 Other accounting routines
be probed later if another device registers. (Which is OK, since
this interface is only for use with non-hotpluggable devices.)
+
+Early Platform Devices and Drivers
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The early platform interfaces provide platform data to platform device
+drivers early on during the system boot. The code is built on top of the
+early_param() command line parsing and can be executed very early on.
+
+Example: "earlyprintk" class early serial console in 6 steps
+
+1. Registering early platform device data
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code registers platform device data using the function
+early_platform_add_devices(). In the case of early serial console this
+should be hardware configuration for the serial port. Devices registered
+at this point will later on be matched against early platform drivers.
+
+2. Parsing kernel command line
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls parse_early_param() to parse the kernel
+command line. This will execute all matching early_param() callbacks.
+User specified early platform devices will be registered at this point.
+For the early serial console case the user can specify port on the
+kernel command line as "earlyprintk=serial.0" where "earlyprintk" is
+the class string, "serial" is the name of the platfrom driver and
+0 is the platform device id. If the id is -1 then the dot and the
+id can be omitted.
+
+3. Installing early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code may optionally force registration of all early
+platform drivers belonging to a certain class using the function
+early_platform_driver_register_all(). User specified devices from
+step 2 have priority over these. This step is omitted by the serial
+driver example since the early serial driver code should be disabled
+unless the user has specified port on the kernel command line.
+
+4. Early platform driver registration
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Compiled-in platform drivers making use of early_platform_init() are
+automatically registered during step 2 or 3. The serial driver example
+should use early_platform_init("earlyprintk", &platform_driver).
+
+5. Probing of early platform drivers belonging to a certain class
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The architecture code calls early_platform_driver_probe() to match
+registered early platform devices associated with a certain class with
+registered early platform drivers. Matched devices will get probed().
+This step can be executed at any point during the early boot. As soon
+as possible may be good for the serial port case.
+
+6. Inside the early platform driver probe()
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The driver code needs to take special care during early boot, especially
+when it comes to memory allocation and interrupt registration. The code
+in the probe() function can use is_early_platform_device() to check if
+it is called at early platform device or at the regular platform device
+time. The early serial driver performs register_console() at this point.
+
+For further information, see <linux/platform_device.h>.
BKL mmap_sem PageLocked(page)
open: no yes
close: no yes
-fault: no yes
-page_mkwrite: no yes no
+fault: no yes can return with page locked
+page_mkwrite: no yes can return with page locked
access: no yes
- ->page_mkwrite() is called when a previously read-only page is
-about to become writeable. The file system is responsible for
-protecting against truncate races. Once appropriate action has been
-taking to lock out truncate, the page range should be verified to be
-within i_size. The page mapping should also be checked that it is not
-NULL.
+ ->fault() is called when a previously not present pte is about
+to be faulted in. The filesystem must find and return the page associated
+with the passed in "pgoff" in the vm_fault structure. If it is possible that
+the page may be truncated and/or invalidated, then the filesystem must lock
+the page, then ensure it is not already truncated (the page lock will block
+subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
+locked. The VM will unlock the page.
+
+ ->page_mkwrite() is called when a previously read-only pte is
+about to become writeable. The filesystem again must ensure that there are
+no truncate/invalidate races, and then return with the page locked. If
+the page has been truncated, the filesystem should not look up a new page
+like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
+will cause the VM to retry the fault.
->access() is called when get_user_pages() fails in
acces_process_vm(), typically used to debug a process through
==================
CacheFiles makes use of the split security in the task_struct. It allocates
-its own task_security structure, and redirects current->act_as to point to it
+its own task_security structure, and redirects current->cred to point to it
when it acts on behalf of another process, in that process's context.
The reason it does this is that it calls vfs_mkdir() and suchlike rather than
the process looks like in /proc.
So CacheFiles makes use of a logical split in the security between the
-objective security (task->sec) and the subjective security (task->act_as). The
-objective security holds the intrinsic security properties of a process and is
-never overridden. This is what appears in /proc, and is what is used when a
+objective security (task->real_cred) and the subjective security (task->cred).
+The objective security holds the intrinsic security properties of a process and
+is never overridden. This is what appears in /proc, and is what is used when a
process is the target of an operation by some other process (SIGKILL for
example).
data transfers.
POHMELFS clients operate with a working set of servers and are capable of balancing read-only
-operations (like lookups or directory listings) between them.
+operations (like lookups or directory listings) between them according to IO priorities.
Administrators can add or remove servers from the set at run-time via special commands (described
-in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers.
+in Documentation/pohmelfs/info.txt file). Writes are replicated to all servers, which are connected
+with write permission turned on. IO priority and permissions can be changed in run-time.
POHMELFS is capable of full data channel encryption and/or strong crypto hashing.
One can select any kernel supported cipher, encryption mode, hash type and operation mode
POHMELFS usage information.
-Mount options:
+Mount options.
+All but index, number of crypto threads and maximum IO size can changed via remount.
+
idx=%u
Each mountpoint is associated with a special index via this option.
Administrator can add or remove servers from the given index, so all mounts,
Usage examples.
-Add (or remove if it already exists) server server1.net:1025 into the working set with index $idx
+Add server server1.net:1025 into the working set with index $idx
with appropriate hash algorithm and key file and cipher algorithm, mode and key file:
-$cfg -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
+$cfg A add -a server1.net -p 1025 -i $idx -K $hash_key -k $cipher_key
Mount filesystem with given index $idx to /mnt mountpoint.
Client will connect to all servers specified in the working set via previous command:
mount -t pohmel -o idx=$idx q /mnt
-One can add or remove servers from working set after mounting too.
+Change permissions to read-only (-I 1 option, '-I 2' - write-only, 3 - rw):
+$cfg A modify -a server1.net -p 1025 -i $idx -I 1
+
+Change IO priority to 123 (node with the highest priority gets read requests).
+$cfg A modify -a server1.net -p 1025 -i $idx -P 123
+One can check currect status of all connections in the mountstats file:
+# cat /proc/$PID/mountstats
+...
+device none mounted on /mnt with fstype pohmel
+idx addr(:port) socket_type protocol active priority permissions
+0 server1.net:1026 1 6 1 250 1
+0 server2.net:1025 1 6 1 123 3
Server installation.
unfreeze_fs: called when VFS is unlocking a filesystem and making it writable
again.
- statfs: called when the VFS needs to get filesystem statistics. This
- is called with the kernel lock held
+ statfs: called when the VFS needs to get filesystem statistics.
remount_fs: called when the filesystem is remounted. This is called
with the kernel lock held
--- /dev/null
+BCM5974 Driver (bcm5974)
+------------------------
+ Copyright (C) 2008-2009 Henrik Rydberg <rydberg@euromail.se>
+
+The USB initialization and package decoding was made by Scott Shawcroft as
+part of the touchd user-space driver project:
+ Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com)
+
+The BCM5974 driver is based on the appletouch driver:
+ Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
+ Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
+ Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
+ Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
+ Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
+
+This driver adds support for the multi-touch trackpad on the new Apple
+Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
+those computers, and integrates well with the synaptics driver of the Xorg
+system.
+
+Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
+Macbook 5 and Macbook Pro 5.
+
+Usage
+-----
+
+The driver loads automatically for the supported usb device ids, and
+becomes available both as an event device (/dev/input/event*) and as a
+mouse via the mousedev driver (/dev/input/mice).
+
+USB Race
+--------
+
+The Apple multi-touch trackpads report both mouse and keyboard events via
+different interfaces of the same usb device. This creates a race condition
+with the HID driver, which, if not told otherwise, will find the standard
+HID mouse and keyboard, and claim the whole device. To remedy, the usb
+product id must be listed in the mouse_ignore list of the hid driver.
+
+Debug output
+------------
+
+To ease the development for new hardware version, verbose packet output can
+be switched on with the debug kernel module parameter. The range [1-9]
+yields different levels of verbosity. Example (as root):
+
+echo -n 9 > /sys/module/bcm5974/parameters/debug
+
+tail -f /var/log/debug
+
+echo -n 0 > /sys/module/bcm5974/parameters/debug
+
+Trivia
+------
+
+The driver was developed at the ubuntu forums in June 2008 [1], and now has
+a more permanent home at bitmath.org [2].
+
+Links
+-----
+
+[1] http://ubuntuforums.org/showthread.php?t=840040
+[2] http://http://bitmath.org/code/
--- /dev/null
+Multi-touch (MT) Protocol
+-------------------------
+ Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se>
+
+
+Introduction
+------------
+
+In order to utilize the full power of the new multi-touch devices, a way to
+report detailed finger data to user space is needed. This document
+describes the multi-touch (MT) protocol which allows kernel drivers to
+report details for an arbitrary number of fingers.
+
+
+Usage
+-----
+
+Anonymous finger details are sent sequentially as separate packets of ABS
+events. Only the ABS_MT events are recognized as part of a finger
+packet. The end of a packet is marked by calling the input_mt_sync()
+function, which generates a SYN_MT_REPORT event. The end of multi-touch
+transfer is marked by calling the usual input_sync() function.
+
+A set of ABS_MT events with the desired properties is defined. The events
+are divided into categories, to allow for partial implementation. The
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
+more granular information may specify general shapes as blobs, i.e., as a
+sequence of rectangular shapes grouped together by an
+ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
+whether the touching tool is a finger or a pen or something else.
+
+
+Event Semantics
+---------------
+
+The word "contact" is used to describe a tool which is in direct contact
+with the surface. A finger, a pen or a rubber all classify as contacts.
+
+ABS_MT_TOUCH_MAJOR
+
+The length of the major axis of the contact. The length should be given in
+surface units. If the surface has an X times Y resolution, the largest
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+
+ABS_MT_TOUCH_MINOR
+
+The length, in surface units, of the minor axis of the contact. If the
+contact is circular, this event can be omitted.
+
+ABS_MT_WIDTH_MAJOR
+
+The length, in surface units, of the major axis of the approaching
+tool. This should be understood as the size of the tool itself. The
+orientation of the contact and the approaching tool are assumed to be the
+same.
+
+ABS_MT_WIDTH_MINOR
+
+The length, in surface units, of the minor axis of the approaching
+tool. Omit if circular.
+
+The above four values can be used to derive additional information about
+the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
+the notion of pressure. The fingers of the hand and the palm all have
+different characteristic widths [1].
+
+ABS_MT_ORIENTATION
+
+The orientation of the ellipse. The value should describe half a revolution
+clockwise around the touch center. The scale of the value is arbitrary, but
+zero should be returned for an ellipse aligned along the Y axis of the
+surface. As an example, an index finger placed straight onto the axis could
+return zero orientation, something negative when twisted to the left, and
+something positive when twisted to the right. This value can be omitted if
+the touching object is circular, or if the information is not available in
+the kernel driver.
+
+ABS_MT_POSITION_X
+
+The surface X coordinate of the center of the touching ellipse.
+
+ABS_MT_POSITION_Y
+
+The surface Y coordinate of the center of the touching ellipse.
+
+ABS_MT_TOOL_TYPE
+
+The type of approaching tool. A lot of kernel drivers cannot distinguish
+between different tool types, such as a finger or a pen. In such cases, the
+event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+MT_TOOL_PEN [2].
+
+ABS_MT_BLOB_ID
+
+The BLOB_ID groups several packets together into one arbitrarily shaped
+contact. This is a low-level anonymous grouping, and should not be confused
+with the high-level contactID, explained below. Most kernel drivers will
+not have this capability, and can safely omit the event.
+
+
+Finger Tracking
+---------------
+
+The kernel driver should generate an arbitrary enumeration of the set of
+anonymous contacts currently on the surface. The order in which the packets
+appear in the event stream is not important.
+
+The process of finger tracking, i.e., to assign a unique contactID to each
+initiated contact on the surface, is left to user space; preferably the
+multi-touch X driver [3]. In that driver, the contactID stays the same and
+unique until the contact vanishes (when the finger leaves the surface). The
+problem of assigning a set of anonymous fingers to a set of identified
+fingers is a euclidian bipartite matching problem at each event update, and
+relies on a sufficiently rapid update rate.
+
+Notes
+-----
+
+In order to stay compatible with existing applications, the data
+reported in a finger packet must not be recognized as single-touch
+events. In addition, all finger data must bypass input filtering,
+since subsequent events of the same type refer to different fingers.
+
+The first kernel driver to utilize the MT protocol is the bcm5974 driver,
+where examples can be found.
+
+[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
+difference between the contact position and the approaching tool position
+could be used to derive tilt.
+[2] The list can of course be extended.
+[3] The multi-touch X driver is currently in the prototyping stage. At the
+time of writing (April 2009), the MT protocol is not yet merged, and the
+prototype implements finger matching, basic mouse support and two-finger
+scrolling. The project aims at improving the quality of current multi-touch
+functionality available in the synaptics X driver, and in addition
+implement more advanced gestures.
#arch/m68k/fpsp040/Makefile
ldflags-y := -x
+ subdir-ccflags-y, subdir-asflags-y
+ The two flags listed above are similar to ccflags-y and as-falgs-y.
+ The difference is that the subdir- variants has effect for the kbuild
+ file where tey are present and all subdirectories.
+ Options specified using subdir-* are added to the commandline before
+ the options specified using the non-subdir variants.
+
+ Example:
+ subdir-ccflags-y := -Werror
+
CFLAGS_$@, AFLAGS_$@
CFLAGS_$@ and AFLAGS_$@ only apply to commands in current
Inside a struct description, you can use the "private:" and "public:"
comment tags. Structure fields that are inside a "private:" area
-are not listed in the generated output documentation.
+are not listed in the generated output documentation. The "private:"
+and "public:" tags must begin immediately following a "/*" comment
+marker. They may optionally include comments between the ":" and the
+ending "*/" marker.
Example:
struct my_struct {
int a;
int b;
-/* private: */
+/* private: internal use only */
int c;
};
usbcore.blinkenlights=1
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+ log_buf_len=1M print-fatal-signals=1
+can also be entered as
+ log-buf-len=1M print_fatal_signals=1
+
+
This document may not be entirely up to date and comprehensive. The command
"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
module. Loadable modules, after being loaded into the running kernel, also
./include/asm/setup.h as COMMAND_LINE_SIZE.
- acpi= [HW,ACPI,X86-64,i386]
+ acpi= [HW,ACPI,X86]
Advanced Configuration and Power Interface
Format: { force | off | ht | strict | noirq | rsdt }
force -- enable ACPI if default was off
acpi_osi="!string2" # remove built-in string2
acpi_osi= # disable all strings
- acpi_pm_good [X86-32,X86-64]
+ acpi_pm_good [X86]
Override the pmtimer bug detection: force the kernel
to assume that this machine's pmtimer latches its value
and always returns good values.
power state again in power transition.
1 : disable the power state check
+ acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode
+ Format: { level | edge | high | low }
+
+ acpi_serialize [HW,ACPI] force serialization of AML methods
+
+ acpi_skip_timer_override [HW,ACPI]
+ Recognize and ignore IRQ0/pin2 Interrupt Override.
+ For broken nForce2 BIOS resulting in XT-PIC timer.
+
+ acpi_sleep= [HW,ACPI] Sleep options
+ Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig,
+ old_ordering, s4_nonvs }
+ See Documentation/power/video.txt for information on
+ s3_bios and s3_mode.
+ s3_beep is for debugging; it makes the PC's speaker beep
+ as soon as the kernel's real-mode entry point is called.
+ s4_nohwsig prevents ACPI hardware signature from being
+ used during resume from hibernation.
+ old_ordering causes the ACPI 1.0 ordering of the _PTS
+ control method, with respect to putting devices into
+ low power states, to be enforced (the ACPI 2.0 ordering
+ of _PTS is used by default).
+ s4_nonvs prevents the kernel from saving/restoring the
+ ACPI NVS memory during hibernation.
+
+ acpi_use_timer_override [HW,ACPI]
+ Use timer override. For some broken Nvidia NF5 boards
+ that require a timer override, but don't have HPET
+
acpi_enforce_resources= [ACPI]
{ strict | lax | no }
Check for resource conflicts between native drivers
ad1848= [HW,OSS]
Format: <io>,<irq>,<dma>,<dma2>,<type>
+ add_efi_memmap [EFI; X86] Include EFI memory map in
+ kernel's map of available physical RAM.
+
advansys= [HW,SCSI]
See header of drivers/scsi/advansys.c.
not play well with APC CPU idle - disable it if you have
APC and your system crashes randomly.
- apic= [APIC,i386] Advanced Programmable Interrupt Controller
+ apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
Change the output verbosity whilst booting
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
Also note the kernel might malfunction if you disable
some critical bits.
- code_bytes [IA32/X86_64] How many bytes of object code to print
+ code_bytes [X86] How many bytes of object code to print
in an oops report.
Range: 0 - 8192
Default: 64
MTRR settings. This parameter disables that behavior,
possibly causing your machine to run very slowly.
- disable_timer_pin_1 [i386,x86-64]
+ disable_timer_pin_1 [X86]
Disable PIN 1 of APIC timer
Can be useful to work around chipset bugs.
UART at the specified I/O port or MMIO address.
The options are the same as for ttyS, above.
- earlyprintk= [X86-32,X86-64,SH,BLACKFIN]
+ earlyprintk= [X86,SH,BLACKFIN]
earlyprintk=vga
earlyprintk=serial[,ttySn[,baudrate]]
earlyprintk=dbgp
See Documentation/block/as-iosched.txt and
Documentation/block/deadline-iosched.txt for details.
- elfcorehdr= [IA64,PPC,SH,X86-32,X86_64]
+ elfcorehdr= [IA64,PPC,SH,X86]
Specifies physical address of start of kernel core
image elf header. Generally kexec loader will
pass this option to capture kernel.
to discrete, to make X server driver able to add WB
entry later. This parameter enables that.
- enable_timer_pin_1 [i386,x86-64]
+ enable_timer_pin_1 [X86]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
(in particular on some ATI chipsets).
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
- for IA-64, off otherwise.
+ for 64bit NUMA, off otherwise.
Format: 0 | 1 (for off | on)
hcl= [IA-64] SGI's Hardware Graph compatibility layer
See comment before marvel_specify_io7 in
arch/alpha/kernel/core_marvel.c.
- io_delay= [X86-32,X86-64] I/O delay method
+ io_delay= [X86] I/O delay method
0x80
Standard port 0x80 based delay
0xed
keepinitrd [HW,ARM]
- kernelcore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter
+ kernelcore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
specifies the amount of memory usable by the kernel
for non-movable allocations. The requested amount is
spread evenly throughout all nodes in the system. The
Configure the RouterBoard 532 series on-chip
Ethernet adapter MAC address.
- kstack=N [X86-32,X86-64] Print N words from the kernel stack
+ kstack=N [X86] Print N words from the kernel stack
in oops dumps.
l2cr= [PPC]
lapic [X86-32,APIC] Enable the local APIC even if BIOS
disabled it.
- lapic_timer_c2_ok [X86-32,x86-64,APIC] trust the local apic timer
+ lapic_timer_c2_ok [X86,APIC] trust the local apic timer
in C2 power state.
libata.dma= [LIBATA] DMA control
[KNL,SH] Allow user to override the default size for
per-device physically contiguous DMA buffers.
- memmap=exactmap [KNL,X86-32,X86_64] Enable setting of an exact
+ memmap=exactmap [KNL,X86] Enable setting of an exact
E820 memory map, as specified by the user.
Such memmap=exactmap lines can be constructed based on
BIOS output or other requirements. See the memmap=nn@ss
mousedev.yres= [MOUSE] Vertical screen resolution, used for devices
reporting absolute coordinates, such as tablets
- movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter
+ movablecore=nn[KMG] [KNL,X86,IA-64,PPC] This parameter
is similar to kernelcore except it specifies the
amount of memory used for migratable allocations.
If both kernelcore and movablecore is specified,
when a NMI is triggered.
Format: [state][,regs][,debounce][,die]
- nmi_watchdog= [KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+ nmi_watchdog= [KNL,BUGS=X86] Debugging features for SMP kernels
Format: [panic,][num]
Valid num: 0,1,2
0 - turn nmi_watchdog off
nodsp [SH] Disable hardware DSP at boot time.
- noefi [X86-32,X86-64] Disable EFI runtime services support.
+ noefi [X86] Disable EFI runtime services support.
noexec [IA-64]
- noexec [X86-32,X86-64]
+ noexec [X86]
On X86-32 available only on PAE configured kernels.
noexec=on: enable non-executable mappings (default)
noexec=off: disable non-executable mappings
noirqdebug [X86-32] Disables the code which attempts to detect and
disable unhandled interrupt sources.
- no_timer_check [X86-32,X86_64,APIC] Disables the code which tests for
+ no_timer_check [X86,APIC] Disables the code which tests for
broken timer IRQ sources.
noisapnp [ISAPNP] Disables ISA PnP code.
nowb [ARM]
+ nox2apic [X86-64,APIC] Do not enable x2APIC mode.
+
nptcg= [IA64] Override max number of concurrent global TLB
purges which is reported from either PAL_VM_SUMMARY or
SAL PALO.
disable the use of PCIE advanced error reporting.
nodomains [PCI] Disable support for multiple PCI
root domains (aka PCI segments, in ACPI-speak).
- nommconf [X86-32,X86_64] Disable use of MMCONFIG for PCI
+ nommconf [X86] Disable use of MMCONFIG for PCI
Configuration
nomsi [MSI] If the PCI_MSI kernel config parameter is
enabled, this kernel boot option can be used to
autoconfiguration.
Ranges are in pairs (memory base and size).
+ ports= [IP_VS_FTP] IPVS ftp helper module
+ Default is 21.
+ Up to 8 (IP_VS_APP_MAX_PORTS) ports
+ may be specified.
+ Format: <port>,<port>....
+
print-fatal-signals=
[KNL] debug: print fatal signals
print-fatal-signals=1: print segfault info to
reported either.
unknown_nmi_panic
- [X86-32,X86-64]
+ [X86]
Set unknown_nmi_panic=1 early on boot.
usbcore.autosuspend=
medium is write-protected).
Example: quirks=0419:aaf5:rl,0421:0433:rc
- vdso= [X86-32,SH,x86-64]
+ vdso= [X86,SH]
vdso=2: enable compat VDSO (default with COMPAT_VDSO)
vdso=1: enable VDSO (default)
vdso=0: disable VDSO mapping
- vdso32= [X86-32,X86-64]
+ vdso32= [X86]
vdso32=2: enable compat VDSO (default with COMPAT_VDSO)
vdso32=1: enable 32-bit VDSO (default)
vdso32=0: disable 32-bit VDSO mapping
ThinkPad ACPI Extras Driver
- Version 0.22
- November 23rd, 2008
+ Version 0.23
+ April 10th, 2009
Borislav Deianov <borislav@users.sf.net>
Henrique de Moraes Holschuh <hmh@hmh.eng.br>
/, /` - or, A Young Coder's Illustrated Hypervisor
\\"--\\ http://lguest.ozlabs.org
-Lguest is designed to be a minimal hypervisor for the Linux kernel, for
-Linux developers and users to experiment with virtualization with the
-minimum of complexity. Nonetheless, it should have sufficient
-features to make it useful for specific tasks, and, of course, you are
-encouraged to fork and enhance it (see drivers/lguest/README).
+Lguest is designed to be a minimal 32-bit x86 hypervisor for the Linux kernel,
+for Linux developers and users to experiment with virtualization with the
+minimum of complexity. Nonetheless, it should have sufficient features to
+make it useful for specific tasks, and, of course, you are encouraged to fork
+and enhance it (see drivers/lguest/README).
Features:
"Paravirtualized guest support" = Y
"Lguest guest support" = Y
"High Memory Support" = off/4GB
+ "PAE (Physical Address Extension) Support" = N
"Alignment value to which kernel should be aligned" = 0x100000
(CONFIG_PARAVIRT=y, CONFIG_LGUEST_GUEST=y, CONFIG_HIGHMEM64G=n and
CONFIG_PHYSICAL_ALIGN=0x100000)
The bit position indicates STATE, STATE-read, for each of the states listed
above, and the character displayed in each indicates:
- '.' acquired while irqs disabled
- '+' acquired in irq context
- '-' acquired with irqs enabled
+ '.' acquired while irqs disabled and not in irq context
+ '-' acquired in irq context
+ '+' acquired with irqs enabled
'?' acquired in irq context with irqs enabled.
Unused mutexes cannot be part of the cause of an error.
+++ /dev/null
-<?xml version="1.0" encoding="UTF-8" standalone="no"?>
-<!-- Created with Inkscape (http://www.inkscape.org/) -->
-<svg
- xmlns:dc="http://purl.org/dc/elements/1.1/"
- xmlns:cc="http://creativecommons.org/ns#"
- xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
- xmlns:svg="http://www.w3.org/2000/svg"
- xmlns="http://www.w3.org/2000/svg"
- xmlns:xlink="http://www.w3.org/1999/xlink"
- xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
- xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
- width="1771.6534"
- height="1417.3228"
- id="svg2"
- sodipodi:version="0.32"
- inkscape:version="0.46"
- sodipodi:docname="tuz.svg"
- inkscape:output_extension="org.inkscape.output.svg.inkscape"
- version="1.0"
- style="display:inline;enable-background:new"
- inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_final.png"
- inkscape:export-xdpi="100.03588"
- inkscape:export-ydpi="100.03588">
- <sodipodi:namedview
- id="base"
- pagecolor="#ffffff"
- bordercolor="#666666"
- borderopacity="1.0"
- gridtolerance="10000"
- guidetolerance="10"
- objecttolerance="10"
- inkscape:pageopacity="0.0"
- inkscape:pageshadow="2"
- inkscape:zoom="0.25"
- inkscape:cx="-174.7931"
- inkscape:cy="784.26325"
- inkscape:document-units="px"
- inkscape:current-layer="svg2"
- showgrid="false"
- inkscape:window-width="1280"
- inkscape:window-height="823"
- inkscape:window-x="-4"
- inkscape:window-y="25"
- showguides="true"
- inkscape:guide-bbox="true"
- units="mm" />
- <defs
- id="defs4">
- <filter
- inkscape:collect="always"
- x="-0.084654994"
- width="1.16931"
- y="-0.36592469"
- height="1.7318494"
- id="filter11361">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.5740586"
- id="feGaussianBlur11363" />
- </filter>
- <inkscape:perspective
- sodipodi:type="inkscape:persp3d"
- inkscape:vp_x="0 : 564.0976 : 1"
- inkscape:vp_y="0 : 1000 : 0"
- inkscape:vp_z="1445.8591 : 564.0976 : 1"
- inkscape:persp3d-origin="722.92957 : 376.06506 : 1"
- id="perspective8145" />
- <linearGradient
- id="linearGradient7622">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop7624" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop7626" />
- </linearGradient>
- <linearGradient
- id="linearGradient4113">
- <stop
- style="stop-color:#000000;stop-opacity:0;"
- offset="0"
- id="stop4115" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop4117" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient3660">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop3662" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop3664" />
- </linearGradient>
- <linearGradient
- id="linearGradient3627">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop3629" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3631" />
- </linearGradient>
- <linearGradient
- id="linearGradient2843">
- <stop
- id="stop2845"
- offset="0"
- style="stop-color:#000000;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.02188784"
- id="stop2847" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.75866222"
- id="stop2849" />
- <stop
- id="stop2851"
- offset="0.88508981"
- style="stop-color:#232323;stop-opacity:1;" />
- <stop
- id="stop2853"
- offset="1"
- style="stop-color:#595959;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient8964">
- <stop
- style="stop-color:#1a1a1a;stop-opacity:1;"
- offset="0"
- id="stop8966" />
- <stop
- style="stop-color:#1a1a1a;stop-opacity:0;"
- offset="1"
- id="stop8968" />
- </linearGradient>
- <linearGradient
- id="linearGradient8952">
- <stop
- style="stop-color:#0a0c0c;stop-opacity:1;"
- offset="0"
- id="stop8954" />
- <stop
- style="stop-color:#1f2727;stop-opacity:0;"
- offset="1"
- id="stop8956" />
- </linearGradient>
- <linearGradient
- id="linearGradient8430">
- <stop
- style="stop-color:#1e2323;stop-opacity:1;"
- offset="0"
- id="stop8432" />
- <stop
- id="stop8438"
- offset="0.55992389"
- style="stop-color:#181d1d;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop8434" />
- </linearGradient>
- <linearGradient
- id="linearGradient8398">
- <stop
- style="stop-color:#283131;stop-opacity:0;"
- offset="0"
- id="stop8400" />
- <stop
- id="stop8402"
- offset="0.5125587"
- style="stop-color:#1e2424;stop-opacity:0;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop8404" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient4870">
- <stop
- style="stop-color:#c7bd80;stop-opacity:1;"
- offset="0"
- id="stop4872" />
- <stop
- style="stop-color:#c7bd80;stop-opacity:0;"
- offset="1"
- id="stop4874" />
- </linearGradient>
- <linearGradient
- inkscape:collect="always"
- id="linearGradient4862">
- <stop
- style="stop-color:#e2e2e2;stop-opacity:1;"
- offset="0"
- id="stop4864" />
- <stop
- style="stop-color:#e2e2e2;stop-opacity:0;"
- offset="1"
- id="stop4866" />
- </linearGradient>
- <linearGradient
- id="linearGradient4478">
- <stop
- style="stop-color:#f9eed3;stop-opacity:1;"
- offset="0"
- id="stop4480" />
- <stop
- style="stop-color:#000000;stop-opacity:0;"
- offset="1"
- id="stop4482" />
- </linearGradient>
- <linearGradient
- id="linearGradient4106">
- <stop
- style="stop-color:#d9e002;stop-opacity:1;"
- offset="0"
- id="stop4108" />
- <stop
- id="stop4114"
- offset="0.5"
- style="stop-color:#a9ae01;stop-opacity:1;" />
- <stop
- style="stop-color:#717501;stop-opacity:1;"
- offset="1"
- id="stop4110" />
- </linearGradient>
- <linearGradient
- id="linearGradient4084">
- <stop
- style="stop-color:#7d7d00;stop-opacity:1;"
- offset="0"
- id="stop4086" />
- <stop
- id="stop4088"
- offset="0.3636601"
- style="stop-color:#c6c700;stop-opacity:1;" />
- <stop
- style="stop-color:#f6f800;stop-opacity:1;"
- offset="1"
- id="stop4090" />
- </linearGradient>
- <linearGradient
- id="linearGradient4041">
- <stop
- id="stop4043"
- offset="0"
- style="stop-color:#ffff00;stop-opacity:1;" />
- <stop
- id="stop4045"
- offset="1"
- style="stop-color:#ffff00;stop-opacity:0;" />
- </linearGradient>
- <linearGradient
- id="linearGradient4025">
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="0"
- id="stop4027" />
- <stop
- style="stop-color:#ffffff;stop-opacity:0;"
- offset="1"
- id="stop4031" />
- </linearGradient>
- <linearGradient
- id="linearGradient4013">
- <stop
- style="stop-color:#ffff00;stop-opacity:1;"
- offset="0"
- id="stop4015" />
- <stop
- style="stop-color:#b2b200;stop-opacity:1;"
- offset="1"
- id="stop4017" />
- </linearGradient>
- <linearGradient
- id="linearGradient3985">
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0"
- id="stop3987" />
- <stop
- style="stop-color:#1d1d1d;stop-opacity:1;"
- offset="1"
- id="stop3989" />
- </linearGradient>
- <linearGradient
- id="linearGradient3961">
- <stop
- style="stop-color:#283131;stop-opacity:0;"
- offset="0"
- id="stop3963" />
- <stop
- id="stop3965"
- offset="0.5"
- style="stop-color:#1e2424;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3967" />
- </linearGradient>
- <linearGradient
- id="linearGradient3951">
- <stop
- id="stop3953"
- offset="0"
- style="stop-color:#344040;stop-opacity:1;" />
- <stop
- style="stop-color:#222929;stop-opacity:1;"
- offset="0.5"
- id="stop3955" />
- <stop
- id="stop3957"
- offset="1"
- style="stop-color:#000000;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- id="linearGradient3909">
- <stop
- style="stop-color:#283131;stop-opacity:1;"
- offset="0"
- id="stop3911" />
- <stop
- id="stop3917"
- offset="0.5"
- style="stop-color:#1e2424;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="1"
- id="stop3913" />
- </linearGradient>
- <linearGradient
- id="linearGradient3537">
- <stop
- style="stop-color:#ada469;stop-opacity:1;"
- offset="0"
- id="stop3539" />
- <stop
- id="stop3545"
- offset="0.81132078"
- style="stop-color:#ada469;stop-opacity:1;" />
- <stop
- style="stop-color:#ffffff;stop-opacity:1;"
- offset="1"
- id="stop3541" />
- </linearGradient>
- <linearGradient
- id="linearGradient3317">
- <stop
- style="stop-color:#cfc690;stop-opacity:1"
- offset="0"
- id="stop3319" />
- <stop
- id="stop3321"
- offset="0.21161865"
- style="stop-color:#afa775;stop-opacity:1;" />
- <stop
- id="stop3323"
- offset="0.53408515"
- style="stop-color:#615c3a;stop-opacity:1;" />
- <stop
- style="stop-color:#000000;stop-opacity:1;"
- offset="0.76504093"
- id="stop3325" />
- <stop
- id="stop3327"
- offset="1"
- style="stop-color:#403518;stop-opacity:1;" />
- </linearGradient>
- <linearGradient
- id="linearGradient3239">
- <stop
- id="stop3251"
- offset="0"
- style="stop-color:#cfc690;stop-opacity:1;" />
- <stop
- style="stop-color:#afa775;stop-opacity:1;"
- offset="0.21161865"
- id="stop3267" />
- <stop
- style="stop-color:#615c3a;stop-opacity:1;"
- offset="0.53408515"
- id="stop3261" />
- <stop
- id="stop3265"
- offset="0.76504093"
- style="stop-color:#000000;stop-opacity:1;" />
- <stop
- style="stop-color:#403518;stop-opacity:1;"
- offset="1"
- id="stop3243" />
- </linearGradient>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3239"
- id="radialGradient3281"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.5480423,1.7414304,-1.9683515,1.7497638,-1130.5586,-1872.5121)"
- spreadMethod="pad"
- cx="806.52582"
- cy="212.68117"
- fx="806.52582"
- fy="212.68117"
- r="48.363216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient3315"
- cx="543.6698"
- cy="147.3131"
- fx="543.6698"
- fy="147.3131"
- r="47.863216"
- gradientTransform="matrix(2.1382256,0,0,2.3382884,-77.03847,-101.68704)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3537"
- id="radialGradient3543"
- cx="385"
- cy="237.00504"
- fx="385"
- fy="237.00504"
- r="86.928574"
- gradientTransform="matrix(1,0,0,0.8562038,0,34.080427)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3909"
- id="radialGradient3915"
- cx="418.30365"
- cy="342.47794"
- fx="418.30365"
- fy="342.47794"
- r="131.4509"
- gradientTransform="matrix(1.3957347,0.6211056,-0.4244067,0.9537174,-15.061913,-227.96711)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3951"
- id="radialGradient3933"
- cx="397.16388"
- cy="336.95245"
- fx="397.16388"
- fy="336.95245"
- r="36.75"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.9449972,2.4894837e-7,-2.4894833e-7,1.9449969,-375.31868,-318.41912)" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3961"
- id="linearGradient3959"
- x1="398.21429"
- y1="343.52289"
- x2="379.28571"
- y2="265.30862"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <filter
- inkscape:collect="always"
- id="filter3981"
- x="-0.30000001"
- width="1.6"
- y="-0.30000001"
- height="1.6">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2"
- id="feGaussianBlur3983" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3985"
- id="radialGradient3991"
- cx="402.48898"
- cy="317.23578"
- fx="402.48898"
- fy="317.23578"
- r="23.714285"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(4.3776616,0,0,4.3776616,-1358.3025,-1070.7357)" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3999">
- <path
- style="opacity:1;fill:#f5ff04;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline"
- d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 339.75316,358.17469 330.35714,331.29075 C 320.9229,304.29747 295.38973,272.16627 263.92857,261.6479 C 232.8953,251.27258 198.91081,256.79953 179.64286,267.36218 z"
- id="path4001"
- sodipodi:nodetypes="czzczzzzc" />
- </clipPath>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient4056"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4041"
- id="radialGradient4060"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4025"
- id="radialGradient4062"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(5.911206e-2,2.6869855,-0.7234268,1.5914947e-2,408.72779,-424.56452)"
- cx="275.4422"
- cy="335.34866"
- fx="275.4422"
- fy="335.34866"
- r="36.75" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient4082"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4100">
- <path
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:0.9000755px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="M 265.93541,126.68393 L 247.1682,295.54701 L 421.27363,222.42633 L 483.22803,311.08516 L 541.11243,279.09486 L 503.57801,99.035183 L 265.93541,126.68393 z"
- id="path4102"
- sodipodi:nodetypes="ccccccc" />
- </clipPath>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4106"
- id="radialGradient4112"
- cx="250.22678"
- cy="475.09763"
- fx="250.22678"
- fy="475.09763"
- r="95.98877"
- gradientTransform="matrix(1.2259004,-0.7077739,0.1413989,0.2449102,322.22326,608.91815)"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4484"
- x1="412.08926"
- y1="404.91574"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4486"
- x1="411.91071"
- y1="404.91577"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4488"
- x1="411.91071"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4490"
- x1="412.08926"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4478"
- id="linearGradient4492"
- x1="411.73212"
- y1="405.54077"
- x2="417.375"
- y2="401.82648"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4862"
- id="radialGradient4868"
- cx="429.56738"
- cy="377.42877"
- fx="429.56738"
- fy="377.42877"
- r="72.079735"
- gradientTransform="matrix(1,0,0,0.618034,0,144.16496)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4870"
- id="radialGradient4876"
- cx="437.6991"
- cy="391.21735"
- fx="437.6991"
- fy="391.21735"
- r="36.611931"
- gradientTransform="matrix(1,0,0,0.618034,0,149.43174)"
- gradientUnits="userSpaceOnUse" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4013"
- id="radialGradient3585"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.1323239,0.7659488,-1.4550286,2.1510098,588.75376,-711.79716)"
- cx="228.81355"
- cy="440.26971"
- fx="228.81355"
- fy="440.26971"
- r="119.17509" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4084"
- id="linearGradient3587"
- gradientUnits="userSpaceOnUse"
- x1="182.35046"
- y1="256.11136"
- x2="145.53348"
- y2="542.20502" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient8410"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-753.99632,-302.76972)"
- cx="317.78754"
- cy="129.65378"
- fx="317.78754"
- fy="129.65378"
- r="47.863216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8398"
- id="radialGradient8412"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-1144.2358,-272.29325)"
- cx="325.30847"
- cy="80.909554"
- fx="325.30847"
- fy="80.909554"
- r="26.937988" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8514">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8516"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8604">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8606"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8610">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8612"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8616">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8618"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8622">
- <path
- style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 821.64329,477.88997 C 821.64329,477.88997 844.26276,471.38316 857.38604,472.01724 C 870.50932,472.65133 888.02762,473.95586 901.09489,484.20343 C 914.16216,494.45099 926.16263,511.3435 935.20728,542.57308 C 944.25193,573.80266 936.9056,641.82509 929.03125,685.92043 C 921.1569,730.01577 900.76615,792.03341 884.03125,825.92043 C 867.29635,859.80745 834.23354,903.41563 823.46182,915.79659 C 812.0976,928.85856 767.25593,952.22276 744.03125,958.06326 C 749.33455,947.45666 792.93101,907.47442 779.03125,897.349 C 765.01228,887.13674 733.27116,943.33136 694.7381,926.38217 C 716.12041,913.25005 736.5175,875.19611 728.77871,859.78772 C 720.93846,844.17733 698.07378,908.54529 635.24317,896.8006 C 665.29521,869.27394 690.65023,825.89659 676.50587,813.8209 C 662.09071,801.51403 616.04412,868.11405 616.04412,868.11405 C 616.04412,868.11405 613.22222,826.41287 629.81732,799.50673 C 646.45667,772.52886 709.47029,717.89146 729.37045,687.80331 C 749.2706,657.71517 762.98301,621.79429 771.50587,595.28537 C 780.02873,568.77645 787.30681,518.18583 787.30681,518.18583"
- id="path8624"
- sodipodi:nodetypes="czzzzzzczczczczzzc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8642">
- <path
- style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
- id="path8644"
- sodipodi:nodetypes="czzcczcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8658">
- <path
- style="opacity:1;fill:#0b0b0b;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 411.39918,1054.7395 368.31696,1064.4919 C 325.23474,1074.2443 251.05253,1099.3079 211.40434,1091.7573 C 171.75616,1084.2067 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
- id="path8660"
- sodipodi:nodetypes="czzzcczzcc" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8802"
- x="-0.35311759"
- width="1.7062352"
- y="-0.1817714"
- height="1.3635428">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="48.038491"
- id="feGaussianBlur8804" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8806"
- x="-0.61142862"
- width="2.2228572"
- y="-0.14930232"
- height="1.2986046">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="37.830213"
- id="feGaussianBlur8808" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8810"
- x="-0.23519406"
- width="1.4703881"
- y="-0.24500646"
- height="1.4900129">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="58.328041"
- id="feGaussianBlur8812" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8814"
- x="-0.20466694"
- width="1.4093339"
- y="-0.29007819"
- height="1.5801564">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="22.300169"
- id="feGaussianBlur8816" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8818"
- x="-0.34381232"
- width="1.6876246"
- y="-0.18433961"
- height="1.3686792">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="34.542167"
- id="feGaussianBlur8820" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8822"
- x="-0.2742857"
- width="1.5485713"
- y="-0.21333334"
- height="1.4266667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="11.313708"
- id="feGaussianBlur8824" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8826"
- x="-0.25894088"
- width="1.5178818"
- y="-0.2236412"
- height="1.4472824">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.631544"
- id="feGaussianBlur8828" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8856"
- x="-0.3253231"
- width="1.6506462"
- y="-0.19013336"
- height="1.3802667">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="28.712591"
- id="feGaussianBlur8858" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8860"
- x="-0.38093024"
- width="1.7618605"
- y="-0.17518716"
- height="1.3503743">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.304015"
- id="feGaussianBlur8862" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8888"
- x="-0.2112188"
- width="1.4224375"
- y="-0.16808605"
- height="1.3361721">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.3693583"
- id="feGaussianBlur8890" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8892"
- x="-0.18692794"
- width="1.3738559"
- y="-0.23646873"
- height="1.4729375">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="31.21228"
- id="feGaussianBlur8894" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8906">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 352.24553,211.99185 C 348.4411,186.72762 335.43581,161.35383 335.08873,136.46662 C 334.90247,123.1111 338.36158,109.89571 348.84426,96.912574 C 385.19128,31.616739 465.78517,12.217889 534.77892,5.447147 C 621.70131,-5.569654 719.69159,23.387219 768.15026,100.84843 C 822.27428,176.58173 824.82502,273.38755 848.7623,360.37638 C 878.20009,487.50398 903.54144,616.59052 909.15454,747.22673 C 906.09106,825.40858 900.7282,912.41088 848.65133,975.36086 C 800.62479,1025.7183 725.86486,1025.4139 661.58145,1034.3632 C 571.02606,1039.0182 477.22992,1018.2174 399.79755,970.16496 C 335.02191,932.22495 304.06736,856.68633 302.51815,784.14538 C 294.12898,704.27022 328.90967,630.33687 354.13855,556.98577 C 361.60916,474.2247 363.55141,390.73802 363.79189,307.60093 C 362.95507,275.40549 356.70236,243.7836 352.24553,211.99185 z"
- id="path8908"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8940"
- x="-0.25152978"
- width="1.5030596"
- y="-0.053035267"
- height="1.1060705">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="13.024603"
- id="feGaussianBlur8942" />
- </filter>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8952"
- id="linearGradient8958"
- x1="609.31244"
- y1="239.46866"
- x2="560.83142"
- y2="262.86206"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8964"
- id="linearGradient8970"
- x1="603.84064"
- y1="627.85303"
- x2="616.24396"
- y2="585.42664"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(450.03125,73.843964)" />
- <filter
- inkscape:collect="always"
- id="filter9020"
- x="-0.32861114"
- width="1.6572223"
- y="-0.182"
- height="1.364">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9022" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9024"
- x="-0.55453134"
- width="2.1090627"
- y="-0.51434779"
- height="2.0286956">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="20.912684"
- id="feGaussianBlur9026" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9044"
- x="-0.32631579"
- width="1.6526316"
- y="-0.84545463"
- height="2.6909094">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9046" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter9048"
- x="-0.40879121"
- width="1.8175824"
- y="-0.71538466"
- height="2.4307692">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="21.92031"
- id="feGaussianBlur9050" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter3587"
- x="-0.1">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="8.881432"
- id="feGaussianBlur3589" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3602">
- <path
- sodipodi:nodetypes="czzzzzzczczczczzzc"
- id="path3604"
- d="M 647.61204,540.04601 C 647.61204,540.04601 670.23151,533.5392 683.35479,534.17328 C 696.47807,534.80737 713.99637,536.1119 727.06364,546.35947 C 740.13091,556.60703 752.13138,573.49954 761.17603,604.72912 C 770.22068,635.9587 762.87435,703.98113 755,748.07647 C 747.12565,792.17181 726.7349,854.18945 710,888.07647 C 693.2651,921.96349 660.20229,965.57167 649.43057,977.95263 C 638.06635,991.0146 593.22468,1014.3788 570,1020.2193 C 575.3033,1009.6127 618.89976,969.63046 605,959.50504 C 590.98103,949.29278 559.23991,1005.4874 520.70685,988.53821 C 542.08916,975.40609 562.48625,937.35215 554.74746,921.94376 C 546.90721,906.33337 524.04253,970.70133 461.21192,958.95664 C 491.26396,931.42998 516.61898,888.05263 502.47462,875.97694 C 488.05946,863.67007 442.01287,930.27009 442.01287,930.27009 C 442.01287,930.27009 439.19097,888.56891 455.78607,861.66277 C 472.42542,834.6849 535.43904,780.0475 555.3392,749.95935 C 575.23935,719.87121 588.95176,683.95033 597.47462,657.44141 C 605.99748,630.93249 613.27556,580.34187 613.27556,580.34187"
- style="opacity:1;fill:#202020;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4120"
- x="-0.2770822"
- width="1.5541644"
- y="-0.32482043"
- height="1.6496409">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="19.956289"
- id="feGaussianBlur4122" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3631">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- id="path3633"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3665">
- <path
- sodipodi:nodetypes="czzcczcc"
- id="path3667"
- d="M 366.88839,504.13471 C 366.88839,504.13471 337.33433,544.70776 319.03125,578.42042 C 300.72816,612.13309 260.41016,704.77736 248.67411,749.49185 C 236.91471,794.29529 186.17411,873.06329 186.17411,873.06329 L 262.24554,891.27757 C 262.24554,891.27757 274.05266,878.45422 293.31696,845.20614 C 312.58126,811.95806 353.67411,706.63471 353.67411,706.63471 L 366.88839,504.13471 z"
- style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3677">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
- id="path3679"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter3898">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.892985"
- id="feGaussianBlur3900" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4130"
- x="-0.49509686"
- width="1.9901937"
- y="-0.26708817"
- height="1.5341763">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.730622"
- id="feGaussianBlur4132" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4141"
- x="-0.40611032"
- width="1.8122206"
- y="-0.30260596"
- height="1.6052119">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="9.8586086"
- id="feGaussianBlur4143" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath4177">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path4179"
- d="M 586.13271,997.98981 C 592.92681,1016.8926 596.6264,1031.2895 598.02301,1049.2017 C 599.41963,1067.114 594.24033,1101.0025 595.12255,1119.8578 C 596.0043,1138.703 603.25624,1159.9568 622.46718,1168.8267 C 641.88605,1177.7925 671.78642,1179.038 696.58702,1165.6811 C 721.38762,1152.3241 753.98804,1095.3556 767.56128,1068.3724 C 781.18513,1041.2885 806.32235,953.87507 812.22208,918.60385 C 818.12181,883.33264 814.77262,877.30308 807.6046,869.54836 C 810.2449,841.70821 806.10488,814.61293 820.71429,782.36218 C 790.46528,794.18788 783.332,822.52288 772.3954,847.86726 C 764.39449,796.93433 772.60456,776.59407 775.71429,746.6479 C 746.64953,761.42581 732.85278,793.76192 730.71429,839.50504 C 719.79034,838.20084 709.32285,835.07081 697.14286,838.79075 C 696.87882,792.76741 695.6793,761.90134 706.05349,724.58426 C 652.79802,745.61112 643.10621,831.17836 650,837.36218 C 639.11718,837.89718 628.62892,836.06488 617.14286,840.21933 C 617.78178,797.64798 616.8824,755.31072 587.14286,717.36218 C 587.14286,717.36218 556.1848,798.28452 555.71429,820.93361 C 555.24378,843.5827 565.16588,861.09949 565.16588,861.09949 C 565.16588,861.09949 556.59781,897.84 558.86729,919.33172 C 561.16314,941.07318 579.31019,979.00789 586.13271,997.98981 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4185">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.6164709"
- id="feGaussianBlur4187" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4105">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="3.8640966"
- id="feGaussianBlur4107" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath2833">
- <path
- style="opacity:1;fill:#292929;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 569.03125,1018.7776 C 564.74554,1019.4919 541.4031,1022.3957 511.17411,1028.7776 C 480.94512,1035.1595 453.86016,1033.7437 375.38803,1046.1072 C 295.53625,1058.688 281.32367,1088.6495 267.26578,1093.1715 C 252.56564,1097.9001 121.88839,1027.349 121.88839,1027.349 L 126.17411,933.06329 C 126.17411,933.06329 212.05962,916.86235 238.31696,899.49186 C 264.57431,882.12137 283.89934,849.82588 297.60268,828.06329 C 311.30602,806.3007 330.45982,756.63471 330.45982,756.63471 L 569.03125,1018.7776 z"
- id="path2835"
- sodipodi:nodetypes="czzzcczzcc" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient2843"
- id="linearGradient2841"
- gradientUnits="userSpaceOnUse"
- x1="347.89655"
- y1="1070.2124"
- x2="275.58191"
- y2="867.97992" />
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3627"
- id="linearGradient3688"
- gradientUnits="userSpaceOnUse"
- x1="699.32867"
- y1="269.76755"
- x2="698.97504"
- y2="346.1351" />
- <mask
- maskUnits="userSpaceOnUse"
- id="mask3684">
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#linearGradient3688);fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:0.43724918px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path3686"
- sodipodi:cx="579.474"
- sodipodi:cy="260.57516"
- sodipodi:rx="192.6866"
- sodipodi:ry="164.04877"
- d="M 772.1606,260.57516 A 192.6866,164.04877 0 1 1 386.7874,260.57516 A 192.6866,164.04877 0 1 1 772.1606,260.57516 z"
- transform="translate(-174.03125,62.156036)" />
- </mask>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3622">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 266.27183,924.57186 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87514 C 271.58022,990.42748 284.75965,1019.7825 288.68797,1037.0589 C 292.61419,1054.326 291.3821,1075.3685 276.22853,1088.2071 C 260.91092,1101.1845 234.17726,1109.806 208.39623,1103.9409 C 182.61517,1098.0756 138.84716,1054.7175 119.80604,1033.7126 C 100.6939,1012.6293 56.045183,939.86194 41.867508,909.43681 C 27.689836,879.01169 29.207903,872.71824 33.747793,863.90708 C 24.381071,839.38658 21.334081,813.84027 0.035335518,788.33044 C 30.360815,791.44488 43.915625,815.28677 60.161025,835.47019 C 54.631129,787.39416 42.10631,771.05369 31.787073,744.74589 C 61.781368,750.82755 82.366433,776.61829 95.766856,817.45839 C 105.32101,813.54048 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.00481,738.48135 89.267015,707.32725 C 142.70898,712.99758 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.42601,751.28936 177.62716,712.76848 195.01526,670.9882 C 195.01526,670.9882 243.30204,736.42507 249.40492,756.79397 C 255.50779,777.16288 250.92373,795.49449 250.92373,795.49449 C 250.92373,795.49449 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82997 267.68496,905.69194 266.27183,924.57186 z"
- id="path3624"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3636">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- id="path3638"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3660"
- id="linearGradient3666"
- x1="1255.7386"
- y1="667.09216"
- x2="893.69995"
- y2="858.01099"
- gradientUnits="userSpaceOnUse" />
- <filter
- inkscape:collect="always"
- id="filter3779"
- x="-0.087980822"
- width="1.1759616"
- y="-0.17728332"
- height="1.3545666">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="16.340344"
- id="feGaussianBlur3781" />
- </filter>
- <filter
- id="filter3785"
- inkscape:label="White Fur">
- <feTurbulence
- id="feTurbulence3787"
- in="SourceAlpha"
- type="fractalNoise"
- baseFrequency="0.24044943820224721"
- numOctaves="10"
- seed="655"
- result="result0" />
- <feDisplacementMap
- id="feDisplacementMap3789"
- in="SourceGraphic"
- in2="result0"
- scale="62"
- xChannelSelector="B"
- yChannelSelector="G" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter3677">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.0397518"
- id="feGaussianBlur3679" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3722">
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
- id="path3724"
- sodipodi:nodetypes="czzzzzzzzcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3986">
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
- id="path3988"
- sodipodi:nodetypes="czzzzzzzzcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3992">
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 709.28572,844.50504 C 763.57143,843.07647 835.32072,829.45305 879.28572,817.71932 C 923.33843,805.96218 1005.172,781.37208 1054.6428,759.86218 C 1103.9821,738.40946 1168.2465,700.58058 1208.9286,667.71933 C 1249.4367,634.99864 1261.3185,611.89952 1269.6429,634.1479 C 1278.012,656.51569 1253.2359,690.47352 1231.7857,715.21933 C 1210.1816,740.14273 1179.0544,767.92466 1132.8571,804.50504 C 1086.6598,841.08542 976.77458,906.08967 920,933.07647 C 862.93394,960.20183 791.79666,991.31489 747.85714,1005.5765 C 703.91762,1019.8381 616.42857,1036.6479 616.42857,1036.6479 L 709.28572,844.50504 z"
- id="path3994"
- sodipodi:nodetypes="czzzzzzzzcc" />
- </clipPath>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath3998">
- <path
- style="opacity:1;fill:#262f2f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 178.21428,274.14789 C 174.40985,248.88366 161.40456,223.50987 161.05748,198.62266 C 160.87122,185.26714 164.33033,172.05175 174.81301,159.06861 C 211.16003,93.772775 291.75392,74.373925 360.74767,67.603183 C 447.67006,56.586382 545.66034,85.543255 594.11901,163.00447 C 648.24303,238.73777 650.79377,335.54359 674.73105,422.53242 C 704.16884,549.66002 729.51019,678.74656 735.12329,809.38277 C 732.05981,887.56462 726.69695,974.56692 674.62008,1037.5169 C 626.59354,1087.8743 551.83361,1087.5699 487.5502,1096.5192 C 396.99481,1101.1742 303.19867,1080.3734 225.7663,1032.321 C 160.99066,994.38099 130.03611,918.84237 128.4869,846.30142 C 120.09773,766.42626 154.87842,692.49291 180.1073,619.14181 C 187.57791,536.38074 189.52016,452.89406 189.76064,369.75697 C 188.92382,337.56153 182.67111,305.93964 178.21428,274.14789 z"
- id="path4000"
- sodipodi:nodetypes="cscccccccccccc" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter4002"
- x="-0.24334238"
- width="1.4866848"
- y="-0.39104807"
- height="1.7820961">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="14.589518"
- id="feGaussianBlur4004" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4010"
- x="-0.14577261"
- width="1.2915452"
- y="-0.23523259"
- height="1.4704652">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="4.4442907"
- id="feGaussianBlur4012" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4053">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.6062947"
- id="feGaussianBlur4055" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4079">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.5887624"
- id="feGaussianBlur4081" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter4083">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.5052066"
- id="feGaussianBlur4085" />
- </filter>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient4113"
- id="radialGradient4119"
- cx="296.33783"
- cy="427.17749"
- fx="296.33783"
- fy="427.17749"
- r="19.704132"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.9797125,0,0,2.9797125,-599.28727,-827.0855)" />
- <filter
- inkscape:collect="always"
- id="filter6949"
- x="-0.10294895"
- width="1.2058979"
- y="-0.34224695"
- height="1.6844939">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6951" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6953"
- x="-0.098320946"
- width="1.1966419"
- y="-0.19750816"
- height="1.3950163">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6955" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6957"
- x="-0.098213427"
- width="1.1964267"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6959" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6961"
- x="-0.09919104"
- width="1.1983821"
- y="-0.22643611"
- height="1.4528722">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6963" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6965"
- x="-0.099081434"
- width="1.1981629"
- y="-0.22529824"
- height="1.4505965">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6967" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6969"
- x="-0.10450897"
- width="1.2090179"
- y="-0.40468886"
- height="1.8093777">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6971" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6973"
- x="-0.10330495"
- width="1.2066098"
- y="-0.36439717"
- height="1.7287945">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6975" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6977"
- x="-0.10224481"
- width="1.2044896"
- y="-0.32371372"
- height="1.6474274">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6979" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6981"
- x="-0.10052545"
- width="1.2010509"
- y="-0.2742162"
- height="1.5484324">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6983" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6985"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20853186"
- height="1.4170637">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6987" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6989"
- x="-0.098428868"
- width="1.1968577"
- y="-0.20287035"
- height="1.4057407">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6991" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6993"
- x="-0.098213255"
- width="1.1964265"
- y="-0.19838208"
- height="1.3967642">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6995" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter6997">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur6999" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7001">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.1675612"
- id="feGaussianBlur7003" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7285"
- x="-0.030884685"
- width="1.0617694"
- y="-0.10267408"
- height="1.2053483">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7287" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7289">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7291" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7293">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7295" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7297">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7299" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7301">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7303" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7305">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7307" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7309">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7311" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7313">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7315" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7317">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7319" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7321">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7323" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7325"
- x="-0.031352691"
- width="1.0627054"
- y="-0.12140666"
- height="1.2428133">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7327" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7329"
- x="-0.030991485"
- width="1.061983"
- y="-0.10931916"
- height="1.2186383">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7331" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7333">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7335" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7337">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.35026836"
- id="feGaussianBlur7339" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7345">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.7233839"
- id="feGaussianBlur7347" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7421">
- <path
- sodipodi:type="inkscape:offset"
- inkscape:radius="0"
- inkscape:original="M 1111.4062 -285.9375 L 1107.4688 -284.0625 C 1107.4283 -284.05228 1107.3692 -284.04201 1107.3438 -284.03125 C 1106.925 -283.8184 1107.1791 -283.93067 1106.6875 -283.71875 C 1106.2014 -283.50919 1104.9499 -283.13456 1102.5938 -282.25 C 1099.2626 -280.99942 1096.7895 -280.10016 1095.5938 -279.1875 C 1094.0576 -279.16623 1091.8733 -278.95419 1089.9375 -278.46875 C 1086.956 -277.72108 1085.0823 -277.29474 1083.1875 -276.875 C 1081.2927 -276.45527 1081.512 -276.23281 1080.3125 -276 C 1079.0159 -275.74833 1078.5911 -276.00899 1074.875 -275.21875 C 1071.3851 -274.4766 1065.9802 -273.28768 1064.7188 -272.53125 C 1063.1348 -272.71203 1060.8513 -272.85303 1058.875 -272.5625 C 1055.8346 -272.11554 1053.9588 -271.88974 1052.0312 -271.65625 C 1051.3758 -271.57687 1050.9902 -271.45547 1050.6875 -271.375 C 1050.2613 -271.24334 1050.0017 -271.11498 1049.3125 -271.03125 C 1048.0009 -270.87188 1047.5503 -271.18808 1043.7812 -270.75 C 1040.2273 -270.33691 1034.7758 -269.47718 1033.5312 -268.8125 C 1031.9322 -269.10979 1029.6735 -269.34669 1027.6875 -269.15625 C 1024.6287 -268.86293 1022.7155 -268.67226 1020.7812 -268.5 C 1018.847 -268.32773 1019.0926 -268.07763 1017.875 -267.96875 C 1016.5588 -267.85105 1016.1152 -268.13238 1012.3438 -267.71875 C 1008.8017 -267.3303 1003.3359 -266.50948 1002.0625 -265.84375 C 1000.4636 -266.13844 998.1753 -266.35076 996.1875 -266.15625 C 993.12921 -265.857 991.2463 -265.67601 989.3125 -265.5 C 988.65501 -265.44015 988.27245 -265.32144 987.96875 -265.25 C 987.54105 -265.13104 987.28525 -265.03193 986.59375 -264.96875 C 985.27775 -264.84849 984.834 -265.16363 981.0625 -264.75 C 977.50631 -264.35998 972.0569 -263.51084 970.8125 -262.84375 C 969.21381 -263.13793 966.95265 -263.36747 964.96875 -263.15625 C 961.91305 -262.83092 959.9947 -262.63001 958.0625 -262.4375 C 956.13031 -262.24499 956.37275 -261.99662 955.15625 -261.875 C 953.84137 -261.74353 953.3932 -262.03954 949.625 -261.59375 C 946.08611 -261.17509 940.6473 -260.30158 939.375 -259.625 C 937.77741 -259.90604 935.51505 -260.04543 933.53125 -259.8125 C 930.47927 -259.45413 928.58625 -259.24464 926.65625 -259.03125 C 926.00007 -258.95869 925.6156 -258.85856 925.3125 -258.78125 C 924.88571 -258.65402 924.6276 -258.51405 923.9375 -258.4375 C 922.62411 -258.29181 922.17015 -258.61152 918.40625 -258.125 C 914.85737 -257.66624 909.4276 -256.70598 908.1875 -256 C 906.59441 -256.24424 904.3537 -256.38135 902.375 -256.125 C 899.32741 -255.73018 897.4243 -255.47655 895.5 -255.21875 C 893.57571 -254.96096 893.7739 -254.72522 892.5625 -254.5625 C 891.25301 -254.3866 890.8153 -254.66688 887.0625 -254.09375 C 883.53821 -253.55551 878.1393 -252.39458 876.875 -251.65625 C 875.28751 -251.85979 873.0295 -251.91098 871.0625 -251.5625 C 868.03631 -251.02638 866.1636 -250.70081 864.25 -250.375 C 863.59941 -250.26423 863.2363 -250.10406 862.9375 -250 C 862.51681 -249.83512 862.27405 -249.6687 861.59375 -249.53125 C 860.29905 -249.26966 859.86665 -249.53745 856.15625 -248.71875 C 852.65777 -247.9468 847.31035 -246.33582 846.09375 -245.5 C 844.53085 -245.57745 842.33625 -245.41472 840.40625 -244.90625 C 837.43387 -244.12312 835.58855 -243.67416 833.71875 -243.15625 C 831.84875 -242.63835 832.0521 -242.38897 830.875 -242.0625 C 829.60251 -241.7096 829.17795 -241.95541 825.53125 -240.875 C 822.10657 -239.86037 816.88185 -237.94183 815.65625 -237.03125 C 814.11747 -237.01851 811.93645 -236.75903 810.03125 -236.15625 C 807.10027 -235.22891 805.2809 -234.69783 803.4375 -234.09375 C 802.81071 -233.88837 802.44585 -233.70117 802.15625 -233.5625 C 801.74867 -233.34889 801.50295 -233.15375 800.84375 -232.9375 C 799.58925 -232.52596 799.1576 -232.74846 795.5625 -231.5 C 792.17261 -230.32283 786.96755 -228.2863 785.78125 -227.34375 C 784.25737 -227.28408 782.1312 -226.94888 780.25 -226.28125 C 777.35261 -225.25296 775.55095 -224.60577 773.71875 -223.96875 C 771.88655 -223.33174 772.0909 -223.12021 770.9375 -222.71875 C 769.69071 -222.28479 769.27395 -222.51903 765.71875 -221.15625 C 762.38005 -219.87645 757.23165 -217.6737 756.03125 -216.6875 C 754.52407 -216.57981 752.39555 -216.1887 750.53125 -215.46875 C 747.66307 -214.36115 745.90735 -213.68719 744.09375 -213 C 743.47705 -212.76637 743.0973 -212.55797 742.8125 -212.40625 C 742.81251 -212.40625 742.8125 -212.37673 742.8125 -212.375 L 734.8125 -209.1875 L 736.625 -194.46875 C 736.36701 -194.52956 742.8125 -191.15625 742.8125 -191.15625 C 743.03891 -191.30093 743.26145 -191.42886 743.53125 -191.53125 C 744.61177 -191.94123 745.70285 -191.74702 749.53125 -193.21875 C 753.35977 -194.69049 754.7553 -195.22373 755.4375 -195.625 C 756.11711 -196.02478 757.04925 -196.50437 757.65625 -197.15625 C 759.48317 -197.294 761.22705 -197.64948 762.59375 -198.15625 C 765.56175 -199.25677 767.4691 -199.96244 769.375 -200.625 C 771.28081 -201.28754 771.72915 -202.03987 772.78125 -202.40625 C 773.87287 -202.78636 774.97635 -202.57163 778.84375 -203.9375 C 782.71115 -205.30336 784.1269 -205.76458 784.8125 -206.15625 C 785.51361 -206.55677 786.5133 -207.08923 787.125 -207.75 C 789.09581 -207.80466 790.94195 -208.13463 792.40625 -208.625 C 795.40777 -209.63008 797.3324 -210.24671 799.25 -210.875 C 800.78861 -211.3791 801.42415 -211.92177 802.15625 -212.3125 C 802.38647 -212.44681 802.63215 -212.56623 802.90625 -212.65625 C 804.00457 -213.01673 805.0877 -212.73762 809 -213.96875 C 812.91231 -215.19988 814.366 -215.6417 815.0625 -216 C 815.75641 -216.35697 816.6926 -216.79261 817.3125 -217.40625 C 819.17771 -217.42891 820.94835 -217.67308 822.34375 -218.09375 C 825.37415 -219.00729 827.33615 -219.52385 829.28125 -220.0625 C 831.22637 -220.60114 831.70745 -221.32702 832.78125 -221.625 C 833.89527 -221.93415 835.00125 -221.61761 838.96875 -222.65625 C 842.93625 -223.69488 844.38625 -224.08898 845.09375 -224.40625 C 845.82855 -224.73584 846.90765 -225.15997 847.53125 -225.78125 C 849.52907 -225.66525 851.3887 -225.80134 852.875 -226.15625 C 855.95311 -226.89125 857.9584 -227.25719 859.9375 -227.65625 C 861.52541 -227.97643 862.1818 -228.4468 862.9375 -228.75 C 863.17501 -228.8568 863.4044 -228.94276 863.6875 -229 C 864.82091 -229.22919 865.99215 -228.79107 870.03125 -229.5 C 874.07067 -230.20893 875.5315 -230.42709 876.25 -230.6875 C 876.96581 -230.94694 877.95435 -231.25474 878.59375 -231.78125 C 880.51795 -231.54176 882.34165 -231.55672 883.78125 -231.78125 C 886.90767 -232.26887 888.9358 -232.48192 890.9375 -232.75 C 892.93921 -233.01807 893.42625 -233.69514 894.53125 -233.84375 C 895.67767 -233.99793 896.8071 -233.54218 900.875 -234.0625 C 904.94281 -234.58282 906.43525 -234.75823 907.15625 -235 C 907.89337 -235.24714 908.95435 -235.58623 909.59375 -236.125 C 911.64375 -235.78947 913.56745 -235.72704 915.09375 -235.90625 C 918.23595 -236.27521 920.27375 -236.46561 922.28125 -236.6875 C 923.89207 -236.86552 924.5459 -237.2957 925.3125 -237.53125 C 925.55341 -237.61677 925.80655 -237.68685 926.09375 -237.71875 C 927.24345 -237.84647 928.39505 -237.3721 932.46875 -237.84375 C 936.54245 -238.3154 938.0278 -238.45435 938.75 -238.6875 C 939.46941 -238.91977 940.45025 -239.16096 941.09375 -239.65625 C 943.03005 -239.32279 944.8638 -239.25201 946.3125 -239.40625 C 949.45851 -239.7412 951.49 -239.92484 953.5 -240.125 C 955.50991 -240.32514 955.98415 -240.95139 957.09375 -241.0625 C 958.24485 -241.17778 959.39025 -240.69744 963.46875 -241.125 C 967.54725 -241.55256 969.05765 -241.68709 969.78125 -241.90625 C 970.52047 -242.13011 971.57685 -242.4195 972.21875 -242.9375 C 974.27575 -242.53883 976.2206 -242.4441 977.75 -242.59375 C 980.89871 -242.90185 982.9258 -243.067 984.9375 -243.25 C 986.55151 -243.39682 987.20055 -243.81055 987.96875 -244.03125 C 988.21005 -244.11211 988.4623 -244.16116 988.75 -244.1875 C 989.90211 -244.29295 991.0429 -243.79475 995.125 -244.1875 C 999.20711 -244.58025 1000.7139 -244.71834 1001.4375 -244.9375 C 1002.1584 -245.15583 1003.1371 -245.3852 1003.7812 -245.875 C 1005.7193 -245.52501 1007.5501 -245.42062 1009 -245.5625 C 1012.1487 -245.8706 1014.1758 -246.03575 1016.1875 -246.21875 C 1018.1991 -246.40174 1018.7017 -247.05677 1019.8125 -247.15625 C 1020.9648 -247.25948 1022.1047 -246.77142 1026.1875 -247.15625 C 1030.2704 -247.54107 1031.7762 -247.65725 1032.5 -247.875 C 1033.2393 -248.09743 1034.2956 -248.38949 1034.9375 -248.90625 C 1036.9949 -248.50448 1038.9404 -248.40292 1040.4688 -248.5625 C 1043.6153 -248.89102 1045.6458 -249.0852 1047.6562 -249.28125 C 1049.2692 -249.43854 1049.9219 -249.91273 1050.6875 -250.15625 C 1050.9282 -250.24429 1051.1507 -250.27762 1051.4375 -250.3125 C 1052.5858 -250.4522 1053.7542 -249.97259 1057.8125 -250.5625 C 1061.8708 -251.15242 1063.3743 -251.33964 1064.0938 -251.59375 C 1064.8104 -251.84691 1065.7684 -252.15182 1066.4062 -252.6875 C 1068.3259 -252.47556 1070.1262 -252.53609 1071.5625 -252.78125 C 1074.6816 -253.31365 1076.6741 -253.70986 1078.6562 -254.09375 C 1080.6383 -254.47762 1081.1305 -255.1334 1082.2188 -255.375 C 1083.3475 -255.62566 1084.489 -255.25871 1088.4688 -256.25 C 1092.4483 -257.24127 1093.8983 -257.6693 1094.5938 -258.03125 C 1095.316 -258.40725 1096.3555 -258.90183 1096.9688 -259.5625 C 1098.9317 -259.57454 1100.7625 -259.85355 1102.1875 -260.40625 C 1105.1387 -261.55085 1107.0607 -262.27567 1108.875 -263.15625 C 1110.3307 -263.86277 1111.1941 -264.85828 1111.4062 -265.15625 C 1111.6185 -265.4542 1111.5051 -265.8848 1111.5312 -265.90625 C 1111.5742 -265.94148 1111.8716 -266.00028 1112.0312 -266.34375 C 1112.8902 -268.19082 1114.3544 -271.97139 1114.4688 -272.65625 C 1114.5825 -273.33839 1114.6368 -274.00902 1114.6875 -274.40625 C 1114.7169 -274.63575 1114.5404 -275.28515 1114.5625 -275.34375 C 1114.5934 -275.42579 1114.8508 -275.59432 1114.9062 -275.84375 C 1115.1725 -277.04206 1114.9953 -278.05111 1114.7812 -279.46875 C 1114.5673 -280.88638 1113.8096 -284.08338 1113.1562 -284.9375 C 1112.4973 -285.79922 1111.9314 -285.94801 1111.4062 -285.9375 z "
- style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- id="path7423"
- d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 736.625,-194.46875 C 736.36701,-194.52956 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
- transform="translate(8.0045714e-2,-3.125e-2)" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7578"
- x="-0.08160872"
- width="1.1632174"
- y="-0.22659944"
- height="1.4531989">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="2.437399"
- id="feGaussianBlur7580" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter7594"
- x="-0.040804356"
- width="1.0816087"
- y="-0.11329972"
- height="1.2265995">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="1.2186995"
- id="feGaussianBlur7596" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7606">
- <path
- id="path7608"
- d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
- style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter7610"
- x="-0.021942979"
- width="1.0438859"
- y="-0.10017137"
- height="1.2003427">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="0.57530213"
- id="feGaussianBlur7612" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath7616">
- <path
- id="path7618"
- d="M 205.47016,-408.97318 L 205.38003,-408.97164 C 203.9344,-408.18598 198.68082,-407.82829 198.10378,-399.93307 C 197.56244,-392.52754 211.88973,-381.83741 213.95811,-380.68826 C 215.62775,-379.76062 217.44286,-379.03275 219.23156,-378.59711 L 220.65023,-378.27877 C 222.5505,-377.93363 224.35065,-377.86862 225.80054,-378.01314 C 228.94914,-378.32698 230.9644,-378.58345 232.96843,-378.82834 C 234.97245,-379.07322 235.50913,-379.69312 236.61162,-379.85833 C 237.75504,-380.02976 238.86821,-379.58419 242.90739,-380.29586 C 246.94627,-381.00755 248.42246,-381.33354 249.14158,-381.64616 C 249.88822,-381.97095 250.95964,-382.39191 251.61747,-383.00826 C 253.57644,-382.88355 255.42223,-383.03435 256.88227,-383.48645 C 259.90603,-384.42272 261.87384,-385.01189 263.74507,-385.76396 C 265.24645,-386.36738 266.17709,-387.30032 266.40943,-387.58279 C 266.64197,-387.86524 266.55894,-388.30268 266.58637,-388.32227 C 266.63172,-388.35443 266.93259,-388.39235 267.11563,-388.72388 C 268.1012,-390.50664 269.82518,-394.17603 269.987,-394.85126 C 270.14794,-395.52383 270.24882,-396.18904 270.32707,-396.58177 C 270.37238,-396.80868 270.24154,-397.46878 270.26767,-397.5257 C 270.30421,-397.6054 270.57272,-397.75558 270.64536,-398.00055 C 270.99449,-399.17741 270.8881,-400.19633 270.77316,-401.62545 C 270.65853,-403.05454 270.12535,-406.29655 269.53303,-407.1941 C 269.15286,-407.77056 268.79088,-408.04035 268.44277,-408.17869 C 268.37703,-408.20061 268.32242,-408.23394 268.26007,-408.2541 C 268.2394,-408.25953 268.21826,-408.25387 268.19773,-408.25845 C 267.89214,-408.35547 267.60176,-408.45912 267.05957,-408.5572 C 266.084,-408.7337 264.65883,-408.98486 263.11782,-409.08304 C 262.60416,-409.11577 262.07992,-409.10775 261.55259,-409.09835 C 257.98058,-409.03472 252.49564,-408.73725 251.24552,-408.18907 C 249.63965,-408.63604 247.34955,-409.07483 245.35499,-409.07027 C 242.28304,-409.06325 240.37552,-409.07493 238.43292,-409.0837 C 236.49041,-409.09248 236.72384,-408.81345 235.50112,-408.81852 C 234.1792,-408.82401 233.73411,-409.16569 229.9455,-409.11245 C 226.38768,-409.06243 220.91754,-408.74723 219.63844,-408.20318 C 218.0323,-408.65065 215.74477,-409.08893 213.74801,-409.08436 C 210.67586,-409.07735 208.76626,-409.05786 206.82375,-409.06662 C 206.16316,-409.06961 205.77525,-409.0156 205.47016,-408.97318 z"
- style="opacity:0.82448976;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <linearGradient
- inkscape:collect="always"
- xlink:href="#linearGradient7622"
- id="linearGradient7708"
- gradientUnits="userSpaceOnUse"
- gradientTransform="translate(-19.091883,4.2426407)"
- x1="774.97668"
- y1="-211.87105"
- x2="755.11584"
- y2="-202.67865" />
- <mask
- maskUnits="userSpaceOnUse"
- id="mask7704">
- <path
- style="fill:url(#linearGradient7708);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
- d="M 718.40812,-224.31217 L 751.65812,-168.31217 L 1027.6581,-192.31217 L 1187.1581,-240.56217 L 1120.6581,-323.31217 L 718.40812,-224.31217 z"
- id="path7706" />
- </mask>
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8430"
- id="radialGradient7904"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(-0.3324832,0.9022288,-0.9582407,-0.3531242,305.29227,19.909497)"
- cx="142.95833"
- cy="107.09234"
- fx="142.95833"
- fy="107.09234"
- r="66.981766" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient3317"
- id="radialGradient7906"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(1.0036478,-1.0345492e-7,1.7124628e-7,1.6613125,-160.53487,-96.205369)"
- cx="317.78754"
- cy="129.65378"
- fx="317.78754"
- fy="129.65378"
- r="47.863216" />
- <radialGradient
- inkscape:collect="always"
- xlink:href="#linearGradient8398"
- id="radialGradient7908"
- gradientUnits="userSpaceOnUse"
- gradientTransform="matrix(2.0747661,-0.1577957,0.2382425,3.1325183,-550.77432,-65.728909)"
- cx="325.30847"
- cy="80.909554"
- fx="325.30847"
- fy="80.909554"
- r="26.937988" />
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8209">
- <path
- sodipodi:nodetypes="czcc"
- id="path8211"
- d="M 734.03125,519.49186 C 734.03125,519.49186 750.78638,556.50992 762.73266,573.44581 C 774.67895,590.3817 815.45982,629.49186 815.45982,629.49186 L 816.05699,490.90211"
- style="opacity:1;fill:#1a1a1a;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8225">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="10.661912"
- id="feGaussianBlur8227" />
- </filter>
- <filter
- inkscape:collect="always"
- id="filter8333">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.18"
- id="feGaussianBlur8335" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8338">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8340"
- d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8354">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="6.82"
- id="feGaussianBlur8356" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8359">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8361"
- d="M 266.27183,924.57185 C 264.86456,943.37307 265.12693,957.32289 268.35357,973.87513 C 271.58023,990.42751 284.75966,1019.7825 288.68798,1037.0589 C 292.61419,1054.326 291.38211,1075.3686 276.22854,1088.2071 C 260.91093,1101.1846 234.17727,1109.8061 208.39624,1103.9409 C 182.61518,1098.0756 138.84716,1054.7175 119.80605,1033.7126 C 100.6939,1012.6293 56.045182,939.86193 41.867507,909.4368 C 27.689835,879.01168 29.207902,872.71823 33.747792,863.90708 C 24.38107,839.38658 21.33408,813.84026 0.035334479,788.33044 C 30.360814,791.44487 43.915624,815.28676 60.161024,835.47019 C 54.631128,787.39416 42.106309,771.05368 31.787072,744.74589 C 61.781367,750.82754 82.366432,776.61828 95.766855,817.45839 C 105.32101,813.54047 114.00462,808.08545 125.95427,808.39719 C 114.65677,766.70139 108.0048,738.48134 89.267014,707.32725 C 142.70898,712.99757 172.92404,787.96657 168.23844,795.28805 C 178.21641,793.04406 187.24409,788.75767 198.67497,789.63638 C 187.426,751.28935 177.62715,712.76848 195.01526,670.98819 C 195.01526,670.98819 243.30204,736.42507 249.40491,756.79397 C 255.50779,777.16287 250.92373,795.49448 250.92373,795.49448 C 250.92373,795.49448 267.8833,826.57978 271.21765,846.58862 C 274.59075,866.82996 267.68496,905.69193 266.27183,924.57185 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8379"
- x="-0.14413793"
- width="1.288276"
- y="-0.10278689"
- height="1.2055738">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="7.389266"
- id="feGaussianBlur8381" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8392">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8394"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- <filter
- inkscape:collect="always"
- id="filter8404"
- x="-0.090268657"
- width="1.1805373"
- y="-0.10250848"
- height="1.205017">
- <feGaussianBlur
- inkscape:collect="always"
- stdDeviation="5.3457272"
- id="feGaussianBlur8406" />
- </filter>
- <clipPath
- clipPathUnits="userSpaceOnUse"
- id="clipPath8417">
- <path
- sodipodi:nodetypes="czzzzzzcccccccccczczz"
- id="path8419"
- d="M 760.16396,935.83377 C 766.95806,954.73656 770.65765,969.13346 772.05426,987.04566 C 773.45088,1004.958 768.27158,1038.8465 769.1538,1057.7018 C 770.03555,1076.547 777.28749,1097.8008 796.49843,1106.6707 C 815.9173,1115.6365 845.81767,1116.882 870.61827,1103.5251 C 895.41887,1090.1681 928.01929,1033.1996 941.59253,1006.2164 C 955.21638,979.13246 980.3536,891.71903 986.25333,856.44781 C 992.15306,821.1766 988.80387,815.14704 981.63585,807.39232 C 984.27615,779.55217 980.13613,752.45689 994.74554,720.20614 C 964.49653,732.03184 957.36325,760.36684 946.42665,785.71122 C 938.42574,734.77829 946.63581,714.43803 949.74554,684.49186 C 920.68078,699.26977 906.88403,731.60588 904.74554,777.349 C 893.82159,776.0448 883.3541,772.91477 871.17411,776.63471 C 870.91007,730.61137 869.71055,699.7453 880.08474,662.42822 C 826.82927,683.45508 817.13746,769.02232 824.03125,775.20614 C 813.14843,775.74114 802.66017,773.90884 791.17411,778.06329 C 791.81303,735.49194 790.91365,693.15468 761.17411,655.20614 C 761.17411,655.20614 730.21605,736.12848 729.74554,758.77757 C 729.27503,781.42666 739.19713,798.94345 739.19713,798.94345 C 739.19713,798.94345 730.62906,835.68396 732.89854,857.17568 C 735.19439,878.91714 753.34144,916.85185 760.16396,935.83377 z"
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </clipPath>
- </defs>
- <metadata
- id="metadata7">
- <rdf:RDF>
- <cc:Work
- rdf:about="">
- <dc:format>image/svg+xml</dc:format>
- <dc:type
- rdf:resource="http://purl.org/dc/dcmitype/StillImage" />
- </cc:Work>
- </rdf:RDF>
- </metadata>
- <g
- inkscape:groupmode="layer"
- id="layer1"
- inkscape:label="Shadow">
- <path
- style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter11361);enable-background:new"
- d="M 304.64285,526.6479 C 294.64285,527.00505 286.42857,529.50504 286.42857,529.50504 L 293.92857,535.57647 L 304.28571,539.1479 L 320.35714,539.50504 L 342.85714,534.1479 L 350.71428,535.21933 L 371.07143,533.07647 L 360.71428,539.86219 C 366.17351,538.83858 378.10757,543.4313 370.35714,545.21933 C 368.61714,545.62075 384.28571,540.57648 384.28571,540.57648 L 386.78571,535.93361 L 390.35714,526.6479 L 401.78571,526.6479 L 419.99999,522.00504 L 423.57143,517.00505 L 407.49999,518.07647 L 395.35714,520.21933 L 380.71428,515.21933 L 310.02218,531.92707 L 304.64285,526.6479 z"
- id="path10326"
- sodipodi:nodetypes="cccccccccsccccccccccc"
- transform="matrix(10.726753,0,0,10.726753,-2882.1235,-4565.4583)"
- inkscape:export-filename="/home/cheeseness/Documents/LCA09/mascot/tuz_new.png"
- inkscape:export-xdpi="142.10527"
- inkscape:export-ydpi="142.10527" />
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer20"
- inkscape:label="New Ear">
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g7882"
- transform="matrix(0.71084,-0.1937433,0.262963,0.9648058,503.68027,136.48399)">
- <path
- sodipodi:nodetypes="czzzzcc"
- id="path7876"
- d="M 245.12255,100.05344 C 245.12255,100.05344 197.99444,68.406519 177.9079,64.252501 C 157.86998,60.108538 139.435,60.934923 125.97426,77.859824 C 112.51352,94.784725 113.89687,139.12502 112.43872,164.82937 C 110.98057,190.53372 114.98817,235.00638 130.04332,253.49489 C 145.09848,271.98339 175.92966,267.07991 179.97027,274.90859 C 182.1831,279.19595 245.12255,100.05344 245.12255,100.05344 z"
- style="opacity:1;fill:url(#radialGradient7904);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <path
- sodipodi:nodetypes="czzzzzc"
- id="path7878"
- d="M 135.37935,82.017807 C 135.37935,82.017807 161.7229,83.95659 173.01242,95.920995 C 184.42736,108.01833 186.74699,117.25251 188.30828,133.65558 C 189.87165,150.08057 187.45871,162.0737 180.49446,169.69292 C 173.53021,177.31214 179.49017,189.27624 154.57841,181.76399 C 129.66665,174.25174 127.54617,153.98101 128.06318,135.45924 C 128.58039,116.93026 135.37935,82.017807 135.37935,82.017807 z"
- style="opacity:1;fill:url(#radialGradient7906);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <path
- sodipodi:nodetypes="czccssc"
- id="path7880"
- d="M 135.648,81.927211 C 135.648,81.927211 131.00335,98.292286 136.23625,110.49031 C 141.72419,123.28285 163.4605,154.75038 163.4605,165.14596 L 186.11675,160.14596 C 188.65893,153.17952 189.32727,144.3939 188.30425,133.64596 C 186.74296,117.24289 184.43795,108.02455 173.023,95.927211 C 163.36812,85.695164 141.42989,82.552354 135.648,81.927211 z"
- style="opacity:1;fill:url(#radialGradient7908);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- </g>
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer21"
- inkscape:label="Rendered2"
- style="display:inline">
- <path
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 845.03125,1154.7776 C 840.74554,1155.4919 817.4031,1158.3957 787.17411,1164.7776 C 756.94512,1171.1595 729.86016,1169.7437 651.38803,1182.1072 C 571.53625,1194.688 557.32367,1224.6495 543.26578,1229.1715 C 528.56564,1233.9001 397.88839,1163.349 397.88839,1163.349 L 402.17411,1069.0633 C 402.17411,1069.0633 488.05962,1052.8624 514.31696,1035.4919 C 540.57431,1018.1214 559.89934,985.82588 573.60268,964.06329 C 587.30602,942.3007 606.45982,892.63471 606.45982,892.63471 L 845.03125,1154.7776 z"
- id="path7917"
- sodipodi:nodetypes="czzzcczzcc" />
- <path
- style="opacity:0.5;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8888);enable-background:accumulate"
- d="M 332.34019,898.38549 L 299.60838,837.08593 L 261.99104,882.19239 C 264.16779,883.5095 267.76529,861.33636 307.59144,817.77531 L 332.34019,898.38549 z"
- id="path7919"
- clip-path="url(#clipPath8658)"
- sodipodi:nodetypes="ccccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:url(#linearGradient2841);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8892);enable-background:accumulate"
- d="M 200.81833,863.03015 L 347.18943,811.41136 L 591.14127,1037.6855 L 349.31075,1177.6927 L 168.29141,1090.0114 L 200.81833,863.03015 z"
- id="path7923"
- clip-path="url(#clipPath2833)"
- sodipodi:nodetypes="cccccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#0f0f0f;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 642.88839,640.13471 C 642.88839,640.13471 613.33433,680.70776 595.03125,714.42042 C 576.72816,748.13309 536.41016,840.77736 524.67411,885.49185 C 512.91471,930.29529 462.17411,1009.0633 462.17411,1009.0633 L 538.24554,1027.2776 C 538.24554,1027.2776 550.05266,1014.4542 569.31696,981.20614 C 588.58126,947.95806 629.67411,842.63471 629.67411,842.63471 L 642.88839,640.13471 z"
- id="path7921"
- sodipodi:nodetypes="czzcczcc" />
- <path
- style="opacity:0.4;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8856);enable-background:accumulate"
- d="M 430.28131,381.94122 C 423.21025,384.76965 194.10007,414.09303 194.10007,414.09303 L 154.46046,773.92607 L 244.65895,866.56568 L 296.98485,752.01438 L 397.45289,565.62246 L 430.28131,381.94122 z"
- id="path7925"
- sodipodi:nodetypes="ccccccc"
- clip-path="url(#clipPath3665)"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 969.67051,1164.0346 C 969.67051,1164.0346 992.92679,1175.4283 1005.7383,1184.5107 C 1018.4357,1193.5122 1035.2107,1209.1598 1047.4307,1221.8712 C 1059.7362,1234.6714 1067.5434,1244.4699 1088.9634,1246.032 C 1110.3956,1247.5949 1142.2458,1237.2444 1162.2594,1221.3678 C 1182.2729,1205.4912 1207.9063,1152.135 1207.9063,1152.135 L 1080.7455,1009.0633"
- id="path7927"
- sodipodi:nodetypes="czzzzcc" />
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8860);enable-background:accumulate"
- d="M 331.34019,641.50471 L 216.17367,835.36467 L 260.2153,925.96265 L 357.79603,732.21539 L 331.34019,641.50471 z"
- id="path7929"
- clip-path="url(#clipPath8642)"
- sodipodi:nodetypes="ccccc"
- transform="translate(276,136)" />
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g7931"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- inkscape:transform-center-x="-347.89063"
- inkscape:transform-center-y="-28.255779">
- <path
- style="opacity:1;fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1049.205,-282.26672 L 1049.1152,-282.25891 C 1047.7278,-281.37446 1042.5119,-280.65171 1042.4862,-272.73547 C 1042.462,-265.31022 1057.4991,-255.64401 1059.6425,-254.64172 C 1061.3727,-253.83263 1063.2341,-253.23296 1065.0488,-252.92297 L 1066.4862,-252.70422 C 1068.4059,-252.49228 1070.2062,-252.55281 1071.6425,-252.79797 C 1074.7616,-253.33037 1076.7541,-253.72658 1078.7362,-254.11047 C 1080.7183,-254.49434 1081.2105,-255.15012 1082.2988,-255.39172 C 1083.4275,-255.64238 1084.569,-255.27543 1088.5488,-256.26672 C 1092.5283,-257.258 1093.9782,-257.68602 1094.6738,-258.04797 C 1095.396,-258.42398 1096.4355,-258.91855 1097.0488,-259.57922 C 1099.0117,-259.59127 1100.8425,-259.87027 1102.2675,-260.42297 C 1105.2187,-261.56758 1107.1407,-262.29239 1108.955,-263.17297 C 1110.4107,-263.8795 1111.2741,-264.875 1111.4862,-265.17297 C 1111.6985,-265.47093 1111.5852,-265.90152 1111.6112,-265.92297 C 1111.6542,-265.95821 1111.9517,-266.017 1112.1112,-266.36047 C 1112.9702,-268.20755 1114.4344,-271.98811 1114.5488,-272.67297 C 1114.6625,-273.35512 1114.7168,-274.02574 1114.7675,-274.42297 C 1114.7969,-274.65248 1114.6204,-275.30187 1114.6425,-275.36047 C 1114.6734,-275.44252 1114.9308,-275.61104 1114.9862,-275.86047 C 1115.2525,-277.05879 1115.0754,-278.06783 1114.8612,-279.48547 C 1114.6473,-280.90311 1113.8896,-284.1001 1113.2362,-284.95422 C 1112.8168,-285.50279 1112.4369,-285.74672 1112.08,-285.86047 C 1112.0129,-285.87776 1111.9561,-285.90721 1111.8925,-285.92297 C 1111.8715,-285.92695 1111.8508,-285.91983 1111.83,-285.92297 C 1111.5184,-285.99847 1111.2215,-286.08164 1110.6738,-286.14172 C 1109.6883,-286.24984 1108.2491,-286.40112 1106.705,-286.39172 C 1106.1903,-286.38859 1105.6679,-286.34408 1105.1425,-286.29797 C 1101.5836,-285.98569 1096.1327,-285.30689 1094.9238,-284.67297 C 1093.2907,-285.00699 1090.9756,-285.2852 1088.9862,-285.14172 C 1085.9222,-284.92075 1084.0185,-284.79953 1082.08,-284.67297 C 1080.1416,-284.54642 1080.3939,-284.28433 1079.1738,-284.20422 C 1077.8547,-284.11762 1077.3869,-284.42747 1073.6112,-284.11047 C 1070.0655,-283.81275 1064.6306,-283.1173 1063.3925,-282.48547 C 1061.7591,-282.81998 1059.4466,-283.09786 1057.455,-282.95422 C 1054.3908,-282.73324 1052.4872,-282.58078 1050.5488,-282.45422 C 1049.8896,-282.41119 1049.5064,-282.33029 1049.205,-282.26672 z"
- id="path7933" />
- <g
- clip-path="url(#clipPath7616)"
- style="display:inline;filter:url(#filter7610);enable-background:new"
- id="g7935"
- transform="matrix(0.9975712,-6.9654277e-2,6.9654277e-2,0.9975712,872.72062,140.02502)">
- <path
- sodipodi:nodetypes="ccssscsssscscsscsssccscssccsscssscc"
- id="path7937"
- d="M 229.94262,-409.12268 C 226.38481,-409.07267 220.91842,-408.76259 219.63928,-408.21854 C 218.03319,-408.66601 215.73612,-409.09985 213.73933,-409.09528 C 210.66734,-409.08826 208.77464,-409.08651 206.83206,-409.09528 C 206.17159,-409.09827 205.78447,-409.02811 205.47939,-408.98569 C 205.47939,-408.98569 205.47939,-407.88976 205.47939,-407.88976 C 205.59911,-408.06923 205.87191,-408.58022 206.42914,-408.65691 C 207.17672,-408.7598 211.59842,-408.80814 213.73933,-408.76651 C 215.51393,-408.73198 218.19456,-408.49224 220.12854,-407.80756 C 220.44994,-407.69378 220.74779,-407.53378 221.02073,-407.39659 C 222.98415,-406.40966 228.96409,-403.09505 228.96409,-403.09505 C 228.96409,-403.09505 222.33134,-407.04273 221.48122,-407.53358 C 221.27791,-407.65097 220.90658,-407.79127 220.44513,-407.94456 C 221.66576,-408.39235 225.5211,-408.56427 228.27336,-408.65691 C 231.29786,-408.75873 231.62112,-408.7465 233.68405,-408.46512 C 235.81336,-408.17469 237.02256,-407.86236 237.02256,-407.86236 C 237.02255,-407.86236 236.9442,-408.50354 238.05865,-408.65691 C 238.80622,-408.7598 243.22794,-408.80814 245.36884,-408.76651 C 247.43834,-408.72625 250.73489,-408.35935 252.65024,-407.39659 C 253.65356,-406.89226 255.68588,-405.82796 257.44559,-404.86088 L 257.5412,-404.88031 C 257.5412,-404.88031 253.96086,-407.04273 253.11073,-407.53358 C 252.90742,-407.65097 252.5361,-407.79127 252.07464,-407.94456 C 253.29526,-408.39235 257.12183,-408.56427 259.87409,-408.65691 C 262.89859,-408.75873 263.22184,-408.7465 265.28478,-408.46512 C 267.23794,-408.19872 268.2977,-407.93506 268.47939,-407.88976 C 268.47939,-407.88976 268.4523,-408.20122 268.4523,-408.20122 C 268.04327,-408.33767 267.73806,-408.43457 267.05192,-408.5587 C 265.75111,-408.79403 263.6528,-409.16026 261.54335,-409.12268 C 257.9714,-409.05904 252.49007,-408.76672 251.24001,-408.21854 C 249.63418,-408.66549 247.36339,-409.09984 245.36884,-409.09528 C 242.29685,-409.08826 240.37536,-409.08651 238.43279,-409.09528 C 236.49023,-409.10406 236.72011,-408.81621 235.49721,-408.8213 C 234.1753,-408.8268 233.73109,-409.17593 229.94262,-409.12268 C 229.94262,-409.12268 229.94262,-409.12268 229.94262,-409.12268"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- id="path7939"
- d="M 206.1989,-407.47878 C 208.11911,-406.66172 210.77605,-405.28595 212.35787,-404.08139 C 213.93971,-402.87683 215.26544,-402.30771 217.91246,-400.16344 C 218.79803,-399.44606 219.66111,-398.81359 220.50439,-398.2417 L 221.04496,-398.43181 C 220.33173,-398.9152 219.5772,-399.45212 218.77587,-400.05384 C 215.95364,-402.17305 215.14932,-402.86357 212.7608,-404.32798 C 210.37226,-405.79238 208.66132,-406.69374 206.1989,-407.47878 C 206.1989,-407.47878 206.1989,-407.47878 206.1989,-407.47878"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- sodipodi:nodetypes="cssccsscc" />
- <path
- id="path7941"
- d="M 237.79963,-407.47878 C 239.71984,-406.66172 242.40557,-405.28595 243.98738,-404.08139 C 244.80045,-403.46223 245.54587,-403.01097 246.43784,-402.42738 L 247.08684,-402.54404 C 246.28853,-403.12041 245.51507,-403.63839 244.39031,-404.32798 C 242.00177,-405.79238 240.26205,-406.69374 237.79963,-407.47878 C 237.79963,-407.47878 237.79963,-407.47878 237.79963,-407.47878"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- sodipodi:nodetypes="csccscc" />
- </g>
- <g
- clip-path="url(#clipPath7606)"
- id="g7943">
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7578);enable-background:new"
- d="M 1056.25,-278.80481 C 1060.3946,-280.28358 1066.25,-275.67981 1066.25,-275.67981 C 1067.149,-275.39889 1068.9751,-276.57428 1068.8743,-277.36595 C 1068.8743,-277.36595 1067.324,-279.22657 1068.5,-280.30481 C 1069.676,-281.38305 1073.796,-278.79743 1076,-278.67981 C 1078.204,-278.56219 1081.5621,-278.90922 1083,-279.42981 C 1084.4379,-279.9504 1084.1129,-280.8544 1085.625,-281.17981 C 1087.1371,-281.50522 1090.7439,-280.14227 1092.6855,-280.01098 C 1094.6271,-279.87969 1097.3336,-279.67671 1098.5,-280.17981 C 1099.6664,-280.68291 1098.6782,-281.33902 1100.375,-282.05481 C 1102.0718,-282.7706 1108.1352,-283.01143 1110,-282.17981 C 1111.8648,-281.34819 1111.8099,-281.66061 1112.625,-279.17981 C 1113.4401,-276.69901 1120.0648,-274.01696 1111.5,-265.80481 C 1102.9352,-257.59266 1052.1221,-252.01887 1045.875,-263.05481 C 1039.6279,-274.09075 1052.1054,-277.32604 1056.25,-278.80481 z"
- id="path7945"
- sodipodi:nodetypes="czzzzzzzzzzzzzz" />
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7594);enable-background:new"
- d="M 1058.5,-275.42981 C 1062.6446,-276.90858 1068.5,-272.30481 1068.5,-272.30481 C 1069.399,-272.02389 1071.2251,-273.19928 1071.1243,-273.99095 C 1071.1243,-273.99095 1069.574,-275.85157 1070.75,-276.92981 C 1071.926,-278.00805 1076.046,-275.42243 1078.25,-275.30481 C 1080.454,-275.18719 1083.8121,-275.53422 1085.25,-276.05481 C 1086.6879,-276.5754 1086.3629,-277.4794 1087.875,-277.80481 C 1089.3871,-278.13022 1092.9939,-276.76727 1094.9355,-276.63598 C 1096.8771,-276.50469 1099.5836,-276.30171 1100.75,-276.80481 C 1101.9164,-277.30791 1100.9282,-277.96402 1102.625,-278.67981 C 1104.3218,-279.3956 1110.3852,-279.63643 1112.25,-278.80481 C 1114.1148,-277.97319 1114.0599,-278.28561 1114.875,-275.80481 C 1115.6901,-273.32401 1122.3148,-270.64196 1113.75,-262.42981 C 1105.1852,-254.21766 1054.3721,-248.64387 1048.125,-259.67981 C 1041.8779,-270.71575 1054.3554,-273.95104 1058.5,-275.42981 z"
- id="path7947"
- sodipodi:nodetypes="czzzzzzzzzzzzzz" />
- </g>
- </g>
- <path
- style="opacity:1;fill:#101414;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 628.24553,347.99185 C 624.4411,322.72762 611.43581,297.35383 611.08873,272.46662 C 610.90247,259.1111 614.36158,245.89571 624.84426,232.91257 C 661.19128,167.61674 741.78517,148.21789 810.77892,141.44715 C 897.70131,130.43035 995.69159,159.38722 1044.1503,236.84843 C 1098.2743,312.58173 1100.825,409.38755 1124.7623,496.37638 C 1154.2001,623.50398 1179.5414,752.59052 1185.1545,883.22673 C 1182.0911,961.40858 1176.7282,1048.4109 1124.6513,1111.3609 C 1076.6248,1161.7183 1001.8649,1161.4139 937.58145,1170.3632 C 847.02606,1175.0182 753.22992,1154.2174 675.79755,1106.165 C 611.02191,1068.225 580.06736,992.68633 578.51815,920.14538 C 570.12898,840.27022 604.90967,766.33687 630.13855,692.98577 C 637.60916,610.2247 639.55141,526.73802 639.79189,443.60093 C 638.95507,411.40549 632.70236,379.7836 628.24553,347.99185 z"
- id="path7949"
- sodipodi:nodetypes="cscccccccccccc" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8940);enable-background:accumulate"
- d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 312.95049,822.27485 312.31937,776.11489 C 311.68792,729.93044 323.14971,667.50703 342.99704,617.81842 C 363.04539,567.62654 379.89378,572.972 385.12193,525.22549 C 390.35008,477.47898 367.69553,375.83357 367.69553,375.83357 L 311.83409,415.43155 z"
- id="path7951"
- sodipodi:nodetypes="ccccczzzcc"
- clip-path="url(#clipPath8616)"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:url(#linearGradient8970);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 1010.0312,655.49186 C 1010.0312,655.49186 1026.7864,692.50992 1038.7327,709.44581 C 1050.6789,726.3817 1091.4598,765.49186 1091.4598,765.49186 L 1144.057,637.90211"
- id="path7953"
- sodipodi:nodetypes="czcc" />
- <path
- style="opacity:0.07999998;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8822);enable-background:accumulate"
- d="M 730.31998,536.56864 C 730.31998,545.05392 772.86772,595.03667 772.86772,595.03667 L 785.47431,566.26713 L 730.31998,536.56864 z"
- id="path7955"
- sodipodi:nodetypes="cccc"
- clip-path="url(#clipPath8209)"
- transform="translate(276,136)" />
- <g
- transform="translate(450.03125,73.843964)"
- style="opacity:1;display:inline;enable-background:new"
- id="g7957"
- clip-path="url(#clipPath3998)">
- <g
- transform="translate(-174.03125,62.156036)"
- style="filter:url(#filter3677)"
- id="g7959">
- <g
- id="g7961"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzzzzzzzz"
- id="path7963"
- d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <rect
- y="412.60312"
- x="343.6539"
- height="181.01935"
- width="381.83765"
- id="rect7965"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g7967"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzcc"
- id="path7969"
- d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="344.82138"
- x="702.86414"
- height="162.63455"
- width="207.8894"
- id="rect7971"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- <g
- transform="translate(-174.03125,62.156036)"
- style="opacity:0.18000004;display:inline;enable-background:new"
- id="g7973">
- <g
- id="g7975"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzzzzzzzz"
- id="path7977"
- d="M 425.88244,476.99186 C 436.68787,475.5132 450.62645,480.34637 470.5253,480.20614 C 490.42415,480.06591 527.97852,463.29492 552.66815,463.06328 C 577.35778,462.83164 615.41985,475.34734 631.95387,478.06328 C 648.48789,480.77922 654.80219,477.90476 659.45386,485.92043 C 664.10553,493.9361 661.38057,496.66767 649.09672,506.63472 C 636.81287,516.60177 608.30704,519.27104 583.02529,519.49186 C 557.74295,519.71268 512.644,526.57038 487.66815,523.42042 C 462.6923,520.27046 430.73059,515.59775 418.73958,505.56328 C 406.74857,495.52881 398.88874,488.83146 401.23958,481.63471 C 403.59042,474.43796 415.07701,478.47052 425.88244,476.99186 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <rect
- y="412.60312"
- x="343.6539"
- height="181.01935"
- width="381.83765"
- id="rect7979"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g7981"
- style="filter:url(#filter3785)">
- <path
- sodipodi:nodetypes="czzzcc"
- id="path7983"
- d="M 687.14286,452.36218 C 676.68117,462.07661 600.16326,471.36732 586.42857,481.6479 C 572.69388,491.92848 571.67605,494.53616 574.28571,501.6479 C 576.89537,508.75964 580.83098,511.05362 600,510.21932 C 619.16902,509.38502 698.57143,482.5976 698.57143,488.79075 L 687.14286,452.36218 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="344.82138"
- x="702.86414"
- height="162.63455"
- width="207.8894"
- id="rect7985"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- </g>
- <path
- style="opacity:0.75;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8802);enable-background:accumulate"
- d="M 582.65599,-7.4183011 L 695.79307,78.848726 L 804.68752,337.64981 L 842.87128,545.5392 L 963.07944,637.46308 C 963.07944,637.46308 950.35151,350.37773 943.28044,323.50767 C 936.20938,296.63761 793.37381,-69.643698 793.37381,-69.643698 L 582.65599,-7.4183011 z"
- id="path7987"
- clip-path="url(#clipPath8604)"
- sodipodi:nodetypes="cccccscc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:url(#linearGradient8958);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 964.13839,239.599 C 964.13839,239.599 972.81571,250.49562 988.24554,251.56328 C 1003.6754,252.63094 1037.9672,211.61061 1058.4241,199.42043 C 1078.9034,187.2169 1105.4705,172.81818 1122.3527,179.06329 C 1139.2348,185.30839 1144.5105,205.49938 1150.2098,227.099 C 1155.9092,248.69861 1156.9284,288.91289 1147.5313,319.95615 C 1138.1341,350.9994 1097.028,393.0599 1082.1741,423.349 C 1067.3202,453.6381 1070.567,463.17043 1070.567,463.17043"
- id="path7989"
- sodipodi:nodetypes="czzzzzzc" />
- <path
- style="opacity:1;fill:url(#radialGradient3315);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1124.4955,207.63471 C 1108.6027,206.74185 1074.7767,219.74054 1058.4241,231.92043 C 1041.9855,244.16433 1029.2032,256.03483 1029.1384,284.06328 C 1029.0732,312.26932 1042.2575,323.13969 1058.2455,331.02757 C 1074.2335,338.91546 1091.9317,338.14685 1110.2098,319.24186 C 1128.488,300.33686 1124.4955,207.63471 1124.4955,207.63471 z"
- id="path7991"
- sodipodi:nodetypes="czzzzc" />
- <path
- sodipodi:type="arc"
- style="opacity:0.75;fill:url(#radialGradient3543);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4120);enable-background:accumulate"
- id="path7993"
- sodipodi:cx="385"
- sodipodi:cy="237.00504"
- sodipodi:rx="86.428574"
- sodipodi:ry="73.928574"
- d="M 471.42857,237.00504 A 86.428574,73.928574 0 1 1 298.57143,237.00504 A 86.428574,73.928574 0 1 1 471.42857,237.00504 z"
- transform="matrix(0.9434749,-0.1239943,0.1440089,1.0957669,451.94827,134.5988)"
- clip-path="url(#clipPath4100)" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:1;fill:url(#radialGradient3915);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 527.60588,407.44884 C 527.60588,407.44884 405.56444,445.85232 340.09154,417.08065 C 274.61865,388.30899 265.71429,292.36218 265.71429,292.36218 C 265.71429,292.36218 339.09587,211.85825 395.63507,208.74742 C 451.46212,205.67578 486.20893,228.89074 510.50508,274.59913 C 534.85708,320.41261 527.60588,407.44884 527.60588,407.44884 z"
- id="path7995"
- sodipodi:nodetypes="csczzc"
- mask="url(#mask3684)" />
- <path
- style="opacity:1;fill:url(#linearGradient3959);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 772.17411,393.349 C 772.17411,393.349 808.39165,365.96653 823.78125,357.45614 C 838.95859,349.06313 849.49553,345.849 859.6741,345.849 L 844.13839,412.81328"
- id="path7997"
- sodipodi:nodetypes="czcc" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient3933);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path7999"
- sodipodi:cx="409.28571"
- sodipodi:cy="306.64789"
- sodipodi:rx="36.25"
- sodipodi:ry="36.25"
- d="M 445.53571,306.64789 A 36.25,36.25 0 1 1 373.03571,306.64789 A 36.25,36.25 0 1 1 445.53571,306.64789 z"
- transform="translate(449.49554,74.915393)" />
- <path
- style="opacity:0.3;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8806);enable-background:accumulate"
- d="M 311.83409,415.43155 L 321.73359,537.05392 L 261.62951,673.52553 L 277.18586,848.1809 C 292.79912,910.0601 309.37131,946.84995 351.56201,965.23473 C 355.88112,928.99475 360.24362,892.86709 320.31937,742.11489 L 337.99704,672.81842 L 410.12193,534.22549 L 367.69553,375.83357 L 311.83409,415.43155 z"
- id="path8001"
- sodipodi:nodetypes="cccccccccc"
- clip-path="url(#clipPath8616)"
- transform="translate(276,136)" />
- <path
- style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8826);enable-background:accumulate"
- d="M 635.21025,581.13004 C 621.06811,593.85796 674.44372,615.71019 711.57778,605.17167 C 748.71184,594.63315 816.22265,569.6073 814.81537,525.97571 C 813.40809,482.34413 738.44784,397.28228 738.44784,397.28228 L 635.21025,581.13004 z"
- id="path8003"
- sodipodi:nodetypes="czzcc" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient3991);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path8005"
- sodipodi:cx="410"
- sodipodi:cy="306.64789"
- sodipodi:rx="23.214285"
- sodipodi:ry="23.214285"
- d="M 433.21428,306.64789 A 23.214285,23.214285 0 1 1 386.78572,306.64789 A 23.214285,23.214285 0 1 1 433.21428,306.64789 z"
- transform="translate(449.67411,74.915393)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3981);enable-background:accumulate"
- id="path8007"
- sodipodi:cx="414.28571"
- sodipodi:cy="303.07648"
- sodipodi:rx="7.5"
- sodipodi:ry="7.5"
- d="M 421.78571,303.07648 A 7.5,7.5 0 1 1 406.78571,303.07648 A 7.5,7.5 0 1 1 421.78571,303.07648 z"
- transform="translate(451.99554,73.486821)" />
- <path
- style="opacity:1;fill:url(#radialGradient4112);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 789.31696,478.349 C 789.31696,478.349 796.33977,497.91759 788.24553,513.349 C 780.15129,528.78041 745.92236,552.33722 720.74554,563.349 C 695.43582,574.41891 635.27254,596.31293 618.95982,605.31328 C 602.49834,614.39571 600.74554,617.99185 600.74554,617.99185 C 600.74554,617.99185 593.59861,598.92744 629.49553,566.20615 C 665.66764,533.23401 771.52265,518.15665 789.31696,478.349 z"
- id="path8009"
- sodipodi:nodetypes="czzzczc" />
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g8011"
- transform="translate(780.74553,74.55825)">
- <path
- transform="translate(-329.81481,0)"
- clip-path="url(#clipPath3999)"
- sodipodi:nodetypes="czzczzzszc"
- id="path8013"
- d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
- style="opacity:1;fill:url(#radialGradient3585);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline" />
- <path
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-166.62245,2.387362)"
- d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
- sodipodi:ry="134.00607"
- sodipodi:rx="64.715881"
- sodipodi:cy="338.07648"
- sodipodi:cx="183.57143"
- id="path8015"
- style="opacity:1;fill:url(#radialGradient4060);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="matrix(0.8823874,0.4705236,-0.4705236,0.8823874,-162.19388,-18.755495)"
- d="M 248.28731,338.07648 A 64.715881,134.00607 0 1 1 118.85555,338.07648 A 64.715881,134.00607 0 1 1 248.28731,338.07648 z"
- sodipodi:ry="134.00607"
- sodipodi:rx="64.715881"
- sodipodi:cy="338.07648"
- sodipodi:cx="183.57143"
- id="path8017"
- style="opacity:1;fill:url(#radialGradient4062);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(-329.81481,3e-7)"
- clip-path="url(#clipPath3999)"
- sodipodi:nodetypes="czzczzzszc"
- id="path8019"
- d="M 179.64286,267.36218 C 157.23242,307.0651 119.02676,383.14247 110.35715,417.00504 C 101.70994,450.78014 101.58516,483.42158 110,503.43362 C 118.3602,523.31575 136.16398,539.06642 150.71428,544.86218 C 150.1179,530.48631 165.08723,501.57635 223.57143,472.36218 C 282.1977,443.07704 301.95306,445.23132 327.14285,425.21932 C 352.77291,404.85756 335.34872,345.57268 330.35714,331.29075 C 325.36556,317.00882 329.12051,327.91101 328.41112,326.19774 C 317.72184,300.38182 294.1968,271.76744 263.92857,261.6479 C 233.66034,251.52836 198.91081,256.79953 179.64286,267.36218 z"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient3587);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4079);enable-background:new" />
- </g>
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path8021"
- sodipodi:cx="310.71429"
- sodipodi:cy="398.07648"
- sodipodi:rx="19.704132"
- sodipodi:ry="19.704132"
- d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
- transform="translate(452.55663,72.581273)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4056);fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4082);stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4083);enable-background:accumulate"
- id="path8023"
- sodipodi:cx="310.71429"
- sodipodi:cy="398.07648"
- sodipodi:rx="19.704132"
- sodipodi:ry="19.704132"
- d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
- transform="translate(450.55663,72.581273)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4119);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- id="path8025"
- sodipodi:cx="310.71429"
- sodipodi:cy="398.07648"
- sodipodi:rx="19.704132"
- sodipodi:ry="19.704132"
- d="M 330.41843,398.07648 A 19.704132,19.704132 0 1 1 291.01016,398.07648 A 19.704132,19.704132 0 1 1 330.41843,398.07648 z"
- transform="translate(450.55663,72.581273)" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4868);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4002);enable-background:accumulate"
- id="path8027"
- sodipodi:cx="429.56738"
- sodipodi:cy="377.42877"
- sodipodi:rx="72.079735"
- sodipodi:ry="44.547726"
- d="M 501.64712,377.42877 A 72.079735,44.547726 0 1 1 357.48765,377.42877 A 72.079735,44.547726 0 1 1 501.64712,377.42877 z"
- transform="matrix(0.9969564,-7.7961675e-2,7.7961675e-2,0.9969564,436.61877,125.29509)"
- inkscape:transform-center-x="-47.231976"
- inkscape:transform-center-y="-3.6935079" />
- <path
- sodipodi:type="arc"
- style="opacity:1;fill:url(#radialGradient4876);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:bevel;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4010);enable-background:accumulate"
- id="path8029"
- sodipodi:cx="437.6991"
- sodipodi:cy="391.21735"
- sodipodi:rx="36.611931"
- sodipodi:ry="22.627417"
- d="M 474.31103,391.21735 A 36.611931,22.627417 0 1 1 401.08717,391.21735 A 36.611931,22.627417 0 1 1 474.31103,391.21735 z"
- transform="matrix(1.4357951,-6.9991037e-2,6.9991037e-2,1.4357951,235.18065,-63.86546)"
- inkscape:transform-center-x="-20.955902"
- inkscape:transform-center-y="-13.056625" />
- <g
- transform="translate(450.03125,73.843964)"
- id="g8031"
- style="opacity:1;display:inline;filter:url(#filter4053);enable-background:new">
- <path
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8033"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4484);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(13.125009,8.1249913)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8035"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4486);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(32.946437,7.4999913)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8037"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4488);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(24.910723,-10.267866)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8039"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4490);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- <path
- transform="translate(47.589294,-0.6250087)"
- d="M 416.87499,401.82648 A 3.2142856,3.2142856 0 1 1 410.44642,401.82648 A 3.2142856,3.2142856 0 1 1 416.87499,401.82648 z"
- sodipodi:ry="3.2142856"
- sodipodi:rx="3.2142856"
- sodipodi:cy="401.82648"
- sodipodi:cx="413.66071"
- id="path8041"
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:url(#linearGradient4492);stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- sodipodi:type="arc" />
- </g>
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 896.20301,482.92837 C 897.1881,487.27845 900.74008,489.10785 903.58974,490.82019 C 908.05042,493.33311 910.1099,492.3423 912.74425,490.06258 C 914.3462,488.14141 923.42736,485.36393 928.33848,482.99151 C 932.66809,481.5326 937.24178,477.63278 941.723,474.65775 C 945.11814,473.03051 947.06964,475.01239 949.55168,475.6679 C 952.4958,476.38451 953.96285,477.83965 955.6126,479.20344 C 958.00876,480.37863 954.6847,482.34657 958.8956,483.49658 C 960.08651,483.71452 961.31255,484.07303 962.17859,482.99151"
- id="path8043"
- sodipodi:nodetypes="ccccccccc" />
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 910.85021,475.35223 C 913.16515,475.32025 914.02799,475.99476 916.34292,474.53148 C 919.79856,471.45035 921.74546,471.38671 924.29787,470.11206 C 927.32444,468.79683 930.83357,478.26375 934.3994,479.96105 C 936.79449,479.13963 935.68854,481.75484 935.85149,482.6127 C 935.90862,485.25954 938.65843,486.29076 940.20777,488.04227 C 943.52381,490.29776 947.583,494.33773 951.31945,493.34557 C 957.7647,490.4145 961.59867,492.06411 967.60816,485.95883 C 968.31221,484.77749 967.02391,479.06423 970.70175,478.76149 C 973.22574,479.01487 974.86842,478.81164 976.76267,479.32971 C 982.20367,481.4469 984.50045,485.77971 991.47301,487.28466 C 997.65591,488.25105 999.08565,491.07892 1005.3626,492.33542"
- id="path8045"
- sodipodi:nodetypes="cccccccccccc" />
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 876.98133,483.52197 C 879.37991,482.72817 883.08746,487.71407 885.15446,490.56765 C 885.74727,493.24717 886.30823,496.0541 885.91207,502.68948 C 886.6972,505.10702 888.59256,505.72043 890.7103,505.97248 C 893.82775,505.4357 896.58699,504.64818 898.0339,502.94202 C 899.9055,501.00035 903.34643,505.33596 906.11512,506.98263 C 909.72521,508.89472 913.8889,508.96149 917.98442,509.25547 C 919.688,509.02483 920.35482,513.77062 921.26741,517.3367 C 921.65155,521.71476 920.38197,524.23239 919.49965,527.18568 C 919.20535,529.68223 922.48815,530.71542 925.8131,531.73137 C 928.99554,532.47261 932.35734,533.39321 934.90447,533.49914 C 940.04633,534.37405 942.99321,536.18966 947.0263,537.53975 C 949.26544,538.3563 950.28649,539.78191 951.57199,541.07528"
- id="path8047"
- sodipodi:nodetypes="ccccccccccccc" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter8814);enable-background:new"
- d="M 332,187.69519 C 332,187.69519 389.5,162.19519 389.5,159.69519 C 389.5,157.19519 395,107.69519 395,107.69519 C 395,107.69519 486,59.195189 486.5,57.195189 C 487,55.195189 572.5,-4.8048114 572.5,-4.8048114 L 386.5,17.195189 L 311,123.19519 L 332,187.69519 z"
- id="path8049"
- clip-path="url(#clipPath8514)"
- transform="translate(276,136)" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 1697.2846,722.5514 C 1697.2846,722.5514 1581.3191,796.0905 1574.2481,800.33314 C 1567.177,804.57578 1343.7312,937.51186 1343.7312,937.51186 L 1347.9739,977.10984 L 1564.3486,876.70067 L 1681.7283,774.8773 L 1697.2846,722.5514 z"
- id="path8051" />
- <path
- style="opacity:0.5;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
- d="M 528.91587,556.85291 C 523.25902,555.4387 347.89654,631.80623 347.89654,631.80623 L 313.95541,812.82557 L 365.05087,1006.7738 L 622.25397,1074.4551 C 622.25397,1074.4551 828.72915,1227.1901 834.386,1222.9475 C 840.04286,1218.7049 1002.6774,1029.2002 1002.6774,1029.2002 L 842.87128,845.35248 L 796.20224,667.16157 L 528.91587,556.85291 z"
- id="path8053"
- clip-path="url(#clipPath8610)"
- sodipodi:nodetypes="cccccscccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#0c0c0c;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1097.6433,613.88997 C 1097.6433,613.88997 1120.2628,607.38316 1133.386,608.01724 C 1146.5093,608.65133 1164.0276,609.95586 1177.0949,620.20343 C 1190.1622,630.45099 1202.1626,647.3435 1211.2073,678.57308 C 1220.2519,709.80266 1212.9056,777.82509 1205.0312,821.92043 C 1197.1569,866.01577 1176.7661,928.03341 1160.0312,961.92043 C 1143.2964,995.80745 1110.2335,1039.4156 1099.4618,1051.7966 C 1088.0976,1064.8586 1043.2559,1088.2228 1020.0312,1094.0633 C 1025.3346,1083.4567 1068.931,1043.4744 1055.0312,1033.349 C 1041.0123,1023.1367 1009.2712,1079.3314 970.7381,1062.3822 C 992.12041,1049.2501 1012.5175,1011.1961 1004.7787,995.78772 C 996.93846,980.17733 974.07378,1044.5453 911.24317,1032.8006 C 941.29521,1005.2739 966.65023,961.89659 952.50587,949.8209 C 938.09071,937.51403 892.04412,1004.1141 892.04412,1004.1141 C 892.04412,1004.1141 889.22222,962.41287 905.81732,935.50673 C 922.45667,908.52886 985.47029,853.89146 1005.3704,823.80331 C 1025.2706,793.71517 1038.983,757.79429 1047.5059,731.28537 C 1056.0287,704.77645 1063.3068,654.18583 1063.3068,654.18583"
- id="path8055"
- sodipodi:nodetypes="czzzzzzczczczczzzc" />
- <path
- style="opacity:0.25;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8818);enable-background:accumulate"
- d="M 770.74639,609.17881 L 719.8347,706.75955 L 639.93163,817.77531 L 674.57987,889.19309 L 717.00628,968.38906 L 789.13117,923.13422 L 803.27331,730.80117 L 824.48651,592.20825 L 810.34437,502.05213 L 770.74639,609.17881 z"
- id="path8057"
- clip-path="url(#clipPath8622)"
- sodipodi:nodetypes="cccccccccc"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8810);enable-background:accumulate"
- d="M 295,846.19519 L 301.64488,777.27234 C 301.64488,777.27234 391.96439,866.27691 464,900.19519 C 536.03561,934.11347 772,962.19519 772,962.19519 L 926,936.19519 L 890,1098.1952 L 604,1124.1952 L 306,1035.1952 L 295,846.19519 z"
- id="path8059"
- clip-path="url(#clipPath8906)"
- sodipodi:nodetypes="cczcccccc"
- transform="translate(276,136)" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter3587);enable-background:new"
- d="M 405.79629,845.99023 L 480.74961,911.04406 L 483.24924,927.92446 L 502.6526,938.08337 L 509.14464,961.13446 L 540.85369,952.76336 L 555.70293,1000.8466 C 567.95945,1013.5745 645.49637,887.7369 611.56436,1039.0304 L 550.75318,1055.2939 L 461.55026,960.60104 L 398.72523,906.80141 L 405.79629,845.99023 z"
- id="path8061"
- sodipodi:nodetypes="cccccccccccc"
- clip-path="url(#clipPath3602)" />
- <path
- style="opacity:1;fill:#121212;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate"
- d="M 1159.317,918.349 C 1213.6027,916.92043 1285.352,903.29701 1329.317,891.56328 C 1373.3697,879.80614 1455.2033,855.21604 1504.674,833.70614 C 1554.0133,812.25342 1618.2778,774.42454 1658.9599,741.56329 C 1699.468,708.8426 1711.3498,685.74348 1719.6741,707.99186 C 1728.0432,730.35965 1703.2672,764.31748 1681.817,789.06329 C 1660.2128,813.98669 1629.0856,841.76862 1582.8883,878.349 C 1536.691,914.92938 1426.8058,979.93363 1370.0312,1006.9204 C 1312.9652,1034.0458 1241.8279,1065.1589 1197.8884,1079.4205 C 1153.9489,1093.6821 1066.4598,1110.4919 1066.4598,1110.4919 L 1159.317,918.349 z"
- id="path8063"
- sodipodi:nodetypes="czzzzzzzzcc" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.5;fill:url(#linearGradient3666);fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3779);enable-background:accumulate"
- d="M 1241.5965,652.95007 C 1241.5965,652.95007 1176.875,707.28713 1095.9326,751.94501 C 1013.9082,797.19985 811.67556,845.28311 811.67556,845.28311 C 811.67556,845.28311 796.57419,866.33507 856.93045,873.56739 C 917.28671,880.79971 1081.0124,820.2667 1135.5306,777.40085 C 1190.0488,734.535 1255.7387,665.67799 1255.7387,665.67799 L 1241.5965,652.95007 z"
- id="path8065"
- sodipodi:nodetypes="czczzcc"
- clip-path="url(#clipPath3992)" />
- <g
- transform="translate(450.03125,73.843964)"
- style="opacity:1;display:inline;enable-background:new"
- id="g8067"
- clip-path="url(#clipPath3986)">
- <g
- transform="translate(-174.03125,62.156036)"
- style="filter:url(#filter3677)"
- id="g8069">
- <g
- style="filter:url(#filter3785)"
- id="g8071">
- <path
- sodipodi:nodetypes="czzccccc"
- id="path8073"
- d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="486.14224"
- x="1197.8389"
- height="309.71277"
- width="333.75412"
- id="rect8075"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- <g
- transform="translate(-174.03125,62.156036)"
- style="opacity:0.18000004;display:inline;enable-background:new"
- id="g8077">
- <g
- style="filter:url(#filter3785)"
- id="g8079">
- <path
- sodipodi:nodetypes="czzccccc"
- id="path8081"
- d="M 1094.2857,725.93361 C 1094.2857,725.93361 1093.9896,752.09452 1098.9285,763.79076 C 1103.8674,775.487 1118.9666,790.27741 1127.5,795.21933 C 1136.0334,800.16125 1146.4286,803.79075 1146.4286,803.79075 L 1264.2857,688.79075 L 1282.1429,613.07647 L 1185.7143,651.6479 L 1094.2857,725.93361 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- transform="translate(174.03125,-62.156036)" />
- <rect
- y="486.14224"
- x="1197.8389"
- height="309.71277"
- width="333.75412"
- id="rect8083"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- </g>
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.83300003;fill:#050505;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:15;stroke-linecap:butt;stroke-linejoin:miter;marker:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter8225);enable-background:accumulate"
- d="M 1264.1875,605 C 1259.6964,605.73268 1256.0305,608.45509 1252.25,611.40625 C 1242.1687,619.27601 1224.0805,645.83149 1204.2188,661.875 C 1164.3514,694.07816 1100.2228,731.85201 1051.6562,752.96875 C 1003.0422,774.10613 921.11498,798.78676 877.34375,810.46875 C 833.94554,822.05121 762.29972,835.59982 709.09375,837 L 704.53125,837.125 L 702.53125,841.25 L 609.6875,1033.375 L 603.1875,1046.8438 L 617.84375,1044 C 617.84375,1044 705.11343,1027.3486 750.1875,1012.7188 C 794.9127,998.20213 865.97836,967.05197 923.21875,939.84375 C 980.82199,912.46306 1090.1551,847.86412 1137.5,810.375 C 1183.8608,773.66518 1215.3049,745.65818 1237.4375,720.125 C 1248.3386,707.549 1260.1823,692.59356 1268.4688,677.375 C 1276.7552,662.15644 1287.6285,633.15692 1282.1562,618.53125 C 1280.9385,615.27651 1279.6048,612.46995 1277.5625,610.03125 C 1275.5202,607.59255 1269.0878,608.45926 1269,605 C 1268.7902,596.73518 1265.6845,604.75577 1264.1875,605 z M 1266.3438,620.21875 C 1266.7586,620.80449 1267.3749,621.77641 1268.125,623.78125 C 1271.0218,631.52338 1266.6843,655.68 1259.3125,669.21875 C 1251.9407,682.7575 1236.6741,698.14269 1226.125,710.3125 C 1205.0496,734.62606 1174.2213,762.17406 1128.1875,798.625 C 1083.1379,834.29659 972.72717,899.71959 916.78125,926.3125 C 859.88952,953.35499 788.68509,984.4309 745.53125,998.4375 C 709.16634,1010.2406 649.68654,1022.2713 629.8125,1026.2188 L 714.09375,851.75 C 768.80066,849.7007 837.88634,836.53365 881.21875,824.96875 C 925.55297,813.1365 1007.2974,788.63242 1057.625,766.75 C 1107.737,744.96129 1170.1594,705.58184 1211.6562,672.0625 C 1232.3026,655.38529 1253.4011,629.51662 1261.4688,623.21875 C 1263.9058,621.31633 1265.5494,620.58295 1266.3438,620.21875 z"
- id="path8085"
- clip-path="url(#clipPath3722)"
- sodipodi:nodetypes="cssssccccccssssssssccssssssccssssc" />
- <g
- style="opacity:1;display:inline;enable-background:new"
- id="g8087"
- mask="url(#mask7704)"
- transform="matrix(0.9934486,0.1142802,-0.1142802,0.9934486,-9.24324,588.09054)"
- inkscape:transform-center-x="-185.09603"
- inkscape:transform-center-y="-12.859654">
- <path
- transform="translate(8.0045714e-2,-3.125e-2)"
- style="fill:#bcb786;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1111.4062,-285.9375 L 1107.4688,-284.0625 C 1107.4283,-284.05228 1107.3692,-284.04201 1107.3438,-284.03125 C 1106.925,-283.8184 1107.1791,-283.93067 1106.6875,-283.71875 C 1106.2014,-283.50919 1104.9499,-283.13456 1102.5938,-282.25 C 1099.2626,-280.99942 1096.7895,-280.10016 1095.5938,-279.1875 C 1094.0576,-279.16623 1091.8733,-278.95419 1089.9375,-278.46875 C 1086.956,-277.72108 1085.0823,-277.29474 1083.1875,-276.875 C 1081.2927,-276.45527 1081.512,-276.23281 1080.3125,-276 C 1079.0159,-275.74833 1078.5911,-276.00899 1074.875,-275.21875 C 1071.3851,-274.4766 1065.9802,-273.28768 1064.7188,-272.53125 C 1063.1348,-272.71203 1060.8513,-272.85303 1058.875,-272.5625 C 1055.8346,-272.11554 1053.9588,-271.88974 1052.0312,-271.65625 C 1051.3758,-271.57687 1050.9902,-271.45547 1050.6875,-271.375 C 1050.2613,-271.24334 1050.0017,-271.11498 1049.3125,-271.03125 C 1048.0009,-270.87188 1047.5503,-271.18808 1043.7812,-270.75 C 1040.2273,-270.33691 1034.7758,-269.47718 1033.5312,-268.8125 C 1031.9322,-269.10979 1029.6735,-269.34669 1027.6875,-269.15625 C 1024.6287,-268.86293 1022.7155,-268.67226 1020.7812,-268.5 C 1018.847,-268.32773 1019.0926,-268.07763 1017.875,-267.96875 C 1016.5588,-267.85105 1016.1152,-268.13238 1012.3438,-267.71875 C 1008.8017,-267.3303 1003.3359,-266.50948 1002.0625,-265.84375 C 1000.4636,-266.13844 998.1753,-266.35076 996.1875,-266.15625 C 993.12921,-265.857 991.2463,-265.67601 989.3125,-265.5 C 988.65501,-265.44015 988.27245,-265.32144 987.96875,-265.25 C 987.54105,-265.13104 987.28525,-265.03193 986.59375,-264.96875 C 985.27775,-264.84849 984.834,-265.16363 981.0625,-264.75 C 977.50631,-264.35998 972.0569,-263.51084 970.8125,-262.84375 C 969.21381,-263.13793 966.95265,-263.36747 964.96875,-263.15625 C 961.91305,-262.83092 959.9947,-262.63001 958.0625,-262.4375 C 956.13031,-262.24499 956.37275,-261.99662 955.15625,-261.875 C 953.84137,-261.74353 953.3932,-262.03954 949.625,-261.59375 C 946.08611,-261.17509 940.6473,-260.30158 939.375,-259.625 C 937.77741,-259.90604 935.51505,-260.04543 933.53125,-259.8125 C 930.47927,-259.45413 928.58625,-259.24464 926.65625,-259.03125 C 926.00007,-258.95869 925.6156,-258.85856 925.3125,-258.78125 C 924.88571,-258.65402 924.6276,-258.51405 923.9375,-258.4375 C 922.62411,-258.29181 922.17015,-258.61152 918.40625,-258.125 C 914.85737,-257.66624 909.4276,-256.70598 908.1875,-256 C 906.59441,-256.24424 904.3537,-256.38135 902.375,-256.125 C 899.32741,-255.73018 897.4243,-255.47655 895.5,-255.21875 C 893.57571,-254.96096 893.7739,-254.72522 892.5625,-254.5625 C 891.25301,-254.3866 890.8153,-254.66688 887.0625,-254.09375 C 883.53821,-253.55551 878.1393,-252.39458 876.875,-251.65625 C 875.28751,-251.85979 873.0295,-251.91098 871.0625,-251.5625 C 868.03631,-251.02638 866.1636,-250.70081 864.25,-250.375 C 863.59941,-250.26423 863.2363,-250.10406 862.9375,-250 C 862.51681,-249.83512 862.27405,-249.6687 861.59375,-249.53125 C 860.29905,-249.26966 859.86665,-249.53745 856.15625,-248.71875 C 852.65777,-247.9468 847.31035,-246.33582 846.09375,-245.5 C 844.53085,-245.57745 842.33625,-245.41472 840.40625,-244.90625 C 837.43387,-244.12312 835.58855,-243.67416 833.71875,-243.15625 C 831.84875,-242.63835 832.0521,-242.38897 830.875,-242.0625 C 829.60251,-241.7096 829.17795,-241.95541 825.53125,-240.875 C 822.10657,-239.86037 816.88185,-237.94183 815.65625,-237.03125 C 814.11747,-237.01851 811.93645,-236.75903 810.03125,-236.15625 C 807.10027,-235.22891 805.2809,-234.69783 803.4375,-234.09375 C 802.81071,-233.88837 802.44585,-233.70117 802.15625,-233.5625 C 801.74867,-233.34889 801.50295,-233.15375 800.84375,-232.9375 C 799.58925,-232.52596 799.1576,-232.74846 795.5625,-231.5 C 792.17261,-230.32283 786.96755,-228.2863 785.78125,-227.34375 C 784.25737,-227.28408 782.1312,-226.94888 780.25,-226.28125 C 777.35261,-225.25296 775.55095,-224.60577 773.71875,-223.96875 C 771.88655,-223.33174 772.0909,-223.12021 770.9375,-222.71875 C 769.69071,-222.28479 769.27395,-222.51903 765.71875,-221.15625 C 762.38005,-219.87645 757.23165,-217.6737 756.03125,-216.6875 C 754.52407,-216.57981 752.39555,-216.1887 750.53125,-215.46875 C 747.66307,-214.36115 745.90735,-213.68719 744.09375,-213 C 743.47705,-212.76637 743.0973,-212.55797 742.8125,-212.40625 C 742.81251,-212.40625 742.8125,-212.37673 742.8125,-212.375 L 734.8125,-209.1875 L 722.3366,-205.69561 L 730.26626,-186.41789 C 729.67463,-184.44432 742.8125,-191.15625 742.8125,-191.15625 C 743.03891,-191.30093 743.26145,-191.42886 743.53125,-191.53125 C 744.61177,-191.94123 745.70285,-191.74702 749.53125,-193.21875 C 753.35977,-194.69049 754.7553,-195.22373 755.4375,-195.625 C 756.11711,-196.02478 757.04925,-196.50437 757.65625,-197.15625 C 759.48317,-197.294 761.22705,-197.64948 762.59375,-198.15625 C 765.56175,-199.25677 767.4691,-199.96244 769.375,-200.625 C 771.28081,-201.28754 771.72915,-202.03987 772.78125,-202.40625 C 773.87287,-202.78636 774.97635,-202.57163 778.84375,-203.9375 C 782.71115,-205.30336 784.1269,-205.76458 784.8125,-206.15625 C 785.51361,-206.55677 786.5133,-207.08923 787.125,-207.75 C 789.09581,-207.80466 790.94195,-208.13463 792.40625,-208.625 C 795.40777,-209.63008 797.3324,-210.24671 799.25,-210.875 C 800.78861,-211.3791 801.42415,-211.92177 802.15625,-212.3125 C 802.38647,-212.44681 802.63215,-212.56623 802.90625,-212.65625 C 804.00457,-213.01673 805.0877,-212.73762 809,-213.96875 C 812.91231,-215.19988 814.366,-215.6417 815.0625,-216 C 815.75641,-216.35697 816.6926,-216.79261 817.3125,-217.40625 C 819.17771,-217.42891 820.94835,-217.67308 822.34375,-218.09375 C 825.37415,-219.00729 827.33615,-219.52385 829.28125,-220.0625 C 831.22637,-220.60114 831.70745,-221.32702 832.78125,-221.625 C 833.89527,-221.93415 835.00125,-221.61761 838.96875,-222.65625 C 842.93625,-223.69488 844.38625,-224.08898 845.09375,-224.40625 C 845.82855,-224.73584 846.90765,-225.15997 847.53125,-225.78125 C 849.52907,-225.66525 851.3887,-225.80134 852.875,-226.15625 C 855.95311,-226.89125 857.9584,-227.25719 859.9375,-227.65625 C 861.52541,-227.97643 862.1818,-228.4468 862.9375,-228.75 C 863.17501,-228.8568 863.4044,-228.94276 863.6875,-229 C 864.82091,-229.22919 865.99215,-228.79107 870.03125,-229.5 C 874.07067,-230.20893 875.5315,-230.42709 876.25,-230.6875 C 876.96581,-230.94694 877.95435,-231.25474 878.59375,-231.78125 C 880.51795,-231.54176 882.34165,-231.55672 883.78125,-231.78125 C 886.90767,-232.26887 888.9358,-232.48192 890.9375,-232.75 C 892.93921,-233.01807 893.42625,-233.69514 894.53125,-233.84375 C 895.67767,-233.99793 896.8071,-233.54218 900.875,-234.0625 C 904.94281,-234.58282 906.43525,-234.75823 907.15625,-235 C 907.89337,-235.24714 908.95435,-235.58623 909.59375,-236.125 C 911.64375,-235.78947 913.56745,-235.72704 915.09375,-235.90625 C 918.23595,-236.27521 920.27375,-236.46561 922.28125,-236.6875 C 923.89207,-236.86552 924.5459,-237.2957 925.3125,-237.53125 C 925.55341,-237.61677 925.80655,-237.68685 926.09375,-237.71875 C 927.24345,-237.84647 928.39505,-237.3721 932.46875,-237.84375 C 936.54245,-238.3154 938.0278,-238.45435 938.75,-238.6875 C 939.46941,-238.91977 940.45025,-239.16096 941.09375,-239.65625 C 943.03005,-239.32279 944.8638,-239.25201 946.3125,-239.40625 C 949.45851,-239.7412 951.49,-239.92484 953.5,-240.125 C 955.50991,-240.32514 955.98415,-240.95139 957.09375,-241.0625 C 958.24485,-241.17778 959.39025,-240.69744 963.46875,-241.125 C 967.54725,-241.55256 969.05765,-241.68709 969.78125,-241.90625 C 970.52047,-242.13011 971.57685,-242.4195 972.21875,-242.9375 C 974.27575,-242.53883 976.2206,-242.4441 977.75,-242.59375 C 980.89871,-242.90185 982.9258,-243.067 984.9375,-243.25 C 986.55151,-243.39682 987.20055,-243.81055 987.96875,-244.03125 C 988.21005,-244.11211 988.4623,-244.16116 988.75,-244.1875 C 989.90211,-244.29295 991.0429,-243.79475 995.125,-244.1875 C 999.20711,-244.58025 1000.7139,-244.71834 1001.4375,-244.9375 C 1002.1584,-245.15583 1003.1371,-245.3852 1003.7812,-245.875 C 1005.7193,-245.52501 1007.5501,-245.42062 1009,-245.5625 C 1012.1487,-245.8706 1014.1758,-246.03575 1016.1875,-246.21875 C 1018.1991,-246.40174 1018.7017,-247.05677 1019.8125,-247.15625 C 1020.9648,-247.25948 1022.1047,-246.77142 1026.1875,-247.15625 C 1030.2704,-247.54107 1031.7762,-247.65725 1032.5,-247.875 C 1033.2393,-248.09743 1034.2956,-248.38949 1034.9375,-248.90625 C 1036.9949,-248.50448 1038.9404,-248.40292 1040.4688,-248.5625 C 1043.6153,-248.89102 1045.6458,-249.0852 1047.6562,-249.28125 C 1049.2692,-249.43854 1049.9219,-249.91273 1050.6875,-250.15625 C 1050.9282,-250.24429 1051.1507,-250.27762 1051.4375,-250.3125 C 1052.5858,-250.4522 1053.7542,-249.97259 1057.8125,-250.5625 C 1061.8708,-251.15242 1063.3743,-251.33964 1064.0938,-251.59375 C 1064.8104,-251.84691 1065.7684,-252.15182 1066.4062,-252.6875 C 1068.3259,-252.47556 1070.1262,-252.53609 1071.5625,-252.78125 C 1074.6816,-253.31365 1076.6741,-253.70986 1078.6562,-254.09375 C 1080.6383,-254.47762 1081.1305,-255.1334 1082.2188,-255.375 C 1083.3475,-255.62566 1084.489,-255.25871 1088.4688,-256.25 C 1092.4483,-257.24127 1093.8983,-257.6693 1094.5938,-258.03125 C 1095.316,-258.40725 1096.3555,-258.90183 1096.9688,-259.5625 C 1098.9317,-259.57454 1100.7625,-259.85355 1102.1875,-260.40625 C 1105.1387,-261.55085 1107.0607,-262.27567 1108.875,-263.15625 C 1110.3307,-263.86277 1111.1941,-264.85828 1111.4062,-265.15625 C 1111.6185,-265.4542 1111.5051,-265.8848 1111.5312,-265.90625 C 1111.5742,-265.94148 1111.8716,-266.00028 1112.0312,-266.34375 C 1112.8902,-268.19082 1114.3544,-271.97139 1114.4688,-272.65625 C 1114.5825,-273.33839 1114.6368,-274.00902 1114.6875,-274.40625 C 1114.7169,-274.63575 1114.5404,-275.28515 1114.5625,-275.34375 C 1114.5934,-275.42579 1114.8508,-275.59432 1114.9062,-275.84375 C 1115.1725,-277.04206 1114.9953,-278.05111 1114.7812,-279.46875 C 1114.5673,-280.88638 1113.8096,-284.08338 1113.1562,-284.9375 C 1112.4973,-285.79922 1111.9314,-285.94801 1111.4062,-285.9375 z"
- id="path8089"
- sodipodi:nodetypes="ccssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssscccccssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssssssssc" />
- <g
- clip-path="url(#clipPath7421)"
- id="g8091">
- <path
- id="path8093"
- d="M 1107.409,-284.04961 C 1106.9903,-283.83678 1107.2534,-283.95572 1106.7618,-283.7438 C 1106.2757,-283.53426 1105.0384,-283.16941 1102.6822,-282.28485 C 1099.3511,-281.03428 1096.852,-280.13141 1095.6563,-279.21875 C 1094.1202,-279.19749 1091.9358,-278.98544 1090,-278.5 C 1087.0185,-277.75234 1085.1448,-277.32599 1083.25,-276.90625 C 1081.3552,-276.48653 1081.5745,-276.26406 1080.375,-276.03125 C 1079.0784,-275.77959 1078.6536,-276.04024 1074.9375,-275.25 C 1071.4476,-274.50786 1066.0427,-273.31893 1064.7813,-272.5625 C 1063.1974,-272.74329 1060.9138,-272.88428 1058.9375,-272.59375 C 1055.8971,-272.1468 1054.0213,-271.92099 1052.0938,-271.6875 C 1051.4384,-271.60813 1051.0527,-271.48672 1050.75,-271.40625 C 1050.3238,-271.2746 1050.0642,-271.14623 1049.375,-271.0625 C 1048.0634,-270.90314 1047.6128,-271.21933 1043.8438,-270.78125 C 1040.2899,-270.36817 1034.8384,-269.50843 1033.5938,-268.84375 C 1031.9948,-269.14105 1029.736,-269.37794 1027.75,-269.1875 C 1024.6912,-268.89419 1022.778,-268.70351 1020.8438,-268.53125 C 1018.9095,-268.35899 1019.1551,-268.10888 1017.9375,-268 C 1016.6213,-267.88231 1016.1777,-268.16363 1012.4063,-267.75 C 1008.8644,-267.36156 1003.3984,-266.54073 1002.125,-265.875 C 1000.5261,-266.1697 998.23783,-266.38201 996.25,-266.1875 C 993.19176,-265.88826 991.30887,-265.70726 989.375,-265.53125 C 988.71751,-265.47141 988.33496,-265.35269 988.03125,-265.28125 C 987.6036,-265.1623 987.34774,-265.06318 986.65625,-265 C 985.34029,-264.87975 984.89649,-265.19488 981.125,-264.78125 C 977.56886,-264.39124 972.11946,-263.54209 970.875,-262.875 C 969.27637,-263.16919 967.01516,-263.39872 965.03125,-263.1875 C 961.97565,-262.86218 960.05721,-262.66126 958.125,-262.46875 C 956.19279,-262.27625 956.43513,-262.02787 955.21875,-261.90625 C 953.90387,-261.77479 953.45577,-262.07079 949.6875,-261.625 C 946.14863,-261.20635 940.70982,-260.33283 939.4375,-259.65625 C 937.83995,-259.9373 935.57754,-260.07668 933.59375,-259.84375 C 930.54177,-259.48539 928.64867,-259.27589 926.71875,-259.0625 C 926.06255,-258.98995 925.67809,-258.88981 925.375,-258.8125 C 924.94823,-258.68528 924.69009,-258.5453 924,-258.46875 C 922.68667,-258.32307 922.23254,-258.64277 918.46875,-258.15625 C 914.91986,-257.6975 909.49012,-256.73723 908.25,-256.03125 C 906.65695,-256.27549 904.41619,-256.4126 902.4375,-256.15625 C 899.38991,-255.76144 897.48679,-255.5078 895.5625,-255.25 C 893.63822,-254.99221 893.83639,-254.75647 892.625,-254.59375 C 891.31554,-254.41785 890.87781,-254.69813 887.125,-254.125 C 883.60071,-253.58676 878.20185,-252.42583 876.9375,-251.6875 C 875.35,-251.89104 873.092,-251.94223 871.125,-251.59375 C 868.09883,-251.05763 866.22611,-250.73206 864.3125,-250.40625 C 863.66189,-250.29548 863.29879,-250.13531 863,-250.03125 C 862.57933,-249.86637 862.33655,-249.69995 861.65625,-249.5625 C 860.3616,-249.30091 859.92913,-249.5687 856.21875,-248.75 C 852.72022,-247.97805 847.3728,-246.36707 846.15625,-245.53125 C 844.59347,-245.6087 842.39867,-245.44597 840.46875,-244.9375 C 837.49631,-244.15437 835.65114,-243.70541 833.78125,-243.1875 C 831.91137,-242.6696 832.11465,-242.42022 830.9375,-242.09375 C 829.66504,-241.74085 829.24047,-241.98666 825.59375,-240.90625 C 822.16905,-239.89162 816.94431,-237.97308 815.71875,-237.0625 C 814.17992,-237.04976 811.99892,-236.79028 810.09375,-236.1875 C 807.16269,-235.26016 805.34344,-234.72908 803.5,-234.125 C 802.87324,-233.91962 802.50827,-233.73242 802.21875,-233.59375 C 801.81112,-233.38014 801.56541,-233.185 800.90625,-232.96875 C 799.65179,-232.55721 799.22014,-232.77971 795.625,-231.53125 C 792.23515,-230.35408 787.03002,-228.31755 785.84375,-227.375 C 784.31986,-227.31533 782.1937,-226.98013 780.3125,-226.3125 C 777.41511,-225.28421 775.61342,-224.63702 773.78125,-224 C 771.94908,-223.36299 772.1534,-223.15146 771,-222.75 C 769.75322,-222.31604 769.33639,-222.55028 765.78125,-221.1875 C 762.44258,-219.9077 757.2941,-217.70495 756.09375,-216.71875 C 754.58657,-216.61106 752.45806,-216.21995 750.59375,-215.5 C 747.72557,-214.3924 745.96995,-213.71844 744.15625,-213.03125 C 743.53959,-212.79762 743.15984,-212.58922 742.875,-212.4375 C 742.875,-212.4375 742.875,-211.34375 742.875,-211.34375 C 742.98678,-211.56611 743.26099,-212.16118 743.78125,-212.4375 C 744.47922,-212.80822 748.59488,-214.43087 750.59375,-215.15625 C 752.25061,-215.7575 754.74764,-216.48493 756.5625,-216.46875 C 756.86412,-216.46606 757.15012,-216.41785 757.40625,-216.375 C 759.24874,-216.06675 764.875,-214.8125 764.875,-214.8125 C 764.87499,-214.8125 758.64151,-216.45925 757.84375,-216.65625 C 757.65296,-216.70336 757.30803,-216.72497 756.875,-216.71875 C 758.02046,-217.58846 761.636,-219.11226 764.21875,-220.15625 C 767.05697,-221.30352 767.33556,-221.40807 769.28125,-221.8125 C 771.28955,-222.22994 772.4375,-222.3125 772.4375,-222.3125 C 772.4375,-222.31249 772.35514,-222.91364 773.40625,-223.4375 C 774.11135,-223.78891 778.29327,-225.3299 780.3125,-226 C 782.2644,-226.64773 785.3699,-227.3585 787.1875,-227 C 789.05073,-226.6325 794.71875,-225.1875 794.71875,-225.1875 C 794.71876,-225.1875 788.43175,-227.05861 787.625,-227.28125 C 787.43208,-227.3345 787.09416,-227.36729 786.65625,-227.375 C 787.81459,-228.20788 791.45069,-229.57032 794.0625,-230.53125 C 796.93266,-231.58726 797.22984,-231.69305 799.1875,-232.0625 C 801.04099,-232.41229 802.04634,-232.48798 802.21875,-232.5 C 802.33235,-232.71724 802.5962,-233.31002 803.125,-233.5625 C 803.83444,-233.90124 808.05107,-235.27525 810.09375,-235.875 C 811.78692,-236.37211 814.33452,-236.91177 816.1875,-236.78125 C 816.49545,-236.75957 816.80099,-236.68399 817.0625,-236.625 C 818.94368,-236.20068 824.65625,-234.59375 824.65625,-234.59375 C 824.65626,-234.59375 818.31451,-236.659 817.5,-236.90625 C 817.30521,-236.96539 816.94212,-237.01019 816.5,-237.03125 C 817.66949,-237.8288 821.36302,-239.08747 824,-239.96875 C 826.89781,-240.93722 827.23301,-240.97207 829.21875,-241.25 C 831.2684,-241.53689 832.40625,-241.5625 832.40625,-241.5625 C 832.40623,-241.5625 832.3335,-242.16947 833.40625,-242.625 C 834.12585,-242.93057 838.39723,-244.12575 840.46875,-244.625 C 842.47119,-245.10758 845.66724,-245.55329 847.53125,-245.03125 C 849.44203,-244.4961 855.25,-242.53125 855.25,-242.53125 C 855.25,-242.53125 848.82734,-244.95476 848,-245.25 C 847.80216,-245.32061 847.41784,-245.39039 846.96875,-245.4375 C 848.15665,-246.16615 851.88402,-247.21158 854.5625,-247.9375 C 857.50592,-248.73525 857.85458,-248.70833 859.875,-248.84375 C 861.78789,-248.97198 862.82205,-248.91484 863,-248.90625 C 863.11728,-249.10991 863.39176,-249.68573 863.9375,-249.875 C 864.66969,-250.12894 869.01602,-250.92289 871.125,-251.25 C 872.87313,-251.52111 875.52588,-251.7347 877.4375,-251.34375 C 877.75516,-251.27879 878.04272,-251.15824 878.3125,-251.0625 C 880.25324,-250.37377 886.15625,-247.96875 886.15625,-247.96875 C 886.15626,-247.96875 879.62154,-250.91952 878.78125,-251.28125 C 878.58028,-251.36776 878.20612,-251.44804 877.75,-251.53125 C 878.9565,-252.16443 882.77956,-252.92685 885.5,-253.4375 C 888.48953,-253.99869 888.80023,-253.96704 890.84375,-253.96875 C 892.95301,-253.97052 894.15625,-253.84375 894.15625,-253.84375 C 894.15625,-253.84374 894.08354,-254.47494 895.1875,-254.78125 C 895.92802,-254.98672 900.31362,-255.61512 902.4375,-255.84375 C 904.49052,-256.06474 907.75613,-256.09597 909.65625,-255.375 C 911.60404,-254.63593 917.5,-252 917.5,-252 C 917.50002,-252 910.93712,-255.17897 910.09375,-255.5625 C 909.89207,-255.65423 909.55154,-255.74871 909.09375,-255.84375 C 910.30467,-256.44563 914.07817,-257.09259 916.8125,-257.5 C 919.8173,-257.94772 920.13801,-257.9517 922.1875,-257.90625 C 924.12795,-257.86323 925.19449,-257.71202 925.375,-257.6875 C 925.49392,-257.88066 925.7589,-258.45333 926.3125,-258.59375 C 927.05521,-258.78213 931.46679,-259.32803 933.59375,-259.53125 C 935.35678,-259.69967 938.01384,-259.76554 939.9375,-259.28125 C 940.25718,-259.20077 940.54101,-259.07766 940.8125,-258.96875 C 942.76543,-258.18526 948.71875,-255.5 948.71875,-255.5 C 948.71873,-255.5 942.12684,-258.75348 941.28125,-259.15625 C 941.07903,-259.25257 940.70899,-259.36328 940.25,-259.46875 C 941.46414,-260.04302 945.29366,-260.59094 948.03125,-260.96875 C 951.03963,-261.38395 951.35432,-261.41138 953.40625,-261.34375 C 955.52423,-261.27394 956.71875,-261.09375 956.71875,-261.09375 C 956.71873,-261.09375 956.6415,-261.73116 957.75,-262 C 958.49362,-262.18035 962.90176,-262.66355 965.03125,-262.84375 C 967.08972,-263.01792 970.37449,-262.96807 972.28125,-262.1875 C 974.23584,-261.38734 980.15625,-258.65625 980.15625,-258.65625 C 980.15623,-258.65625 973.59632,-261.96501 972.75,-262.375 C 972.54763,-262.47305 972.17814,-262.5781 971.71875,-262.6875 C 972.93392,-263.2514 976.72883,-263.8018 979.46875,-264.15625 C 982.47966,-264.54577 982.79006,-264.5539 984.84375,-264.46875 C 986.78814,-264.38815 987.85038,-264.21551 988.03125,-264.1875 C 988.15041,-264.37836 988.41402,-264.93281 988.96875,-265.0625 C 989.71301,-265.2365 994.11868,-265.71297 996.25,-265.875 C 998.01662,-266.00927 1000.6997,-266.00071 1002.625,-265.5 C 1002.945,-265.41679 1003.2283,-265.29873 1003.5,-265.1875 C 1005.4546,-264.38734 1011.4063,-261.625 1011.4063,-261.625 C 1011.4062,-261.625 1004.8151,-264.96501 1003.9688,-265.375 C 1003.7664,-265.47305 1003.3969,-265.57811 1002.9375,-265.6875 C 1004.1526,-266.2514 1007.9788,-266.77056 1010.7188,-267.125 C 1013.7297,-267.51453 1014.0713,-267.5539 1016.125,-267.46875 C 1018.2447,-267.38087 1019.4375,-267.15625 1019.4375,-267.15625 C 1019.4375,-267.15625 1019.3591,-267.80527 1020.4688,-268.0625 C 1021.2131,-268.23506 1025.6183,-268.68586 1027.75,-268.84375 C 1029.8106,-268.99635 1033.0929,-268.94052 1035,-268.15625 C 1036.955,-267.3523 1042.875,-264.65625 1042.875,-264.65625 C 1042.875,-264.65625 1036.3152,-267.93212 1035.4688,-268.34375 C 1035.2663,-268.44219 1034.897,-268.54597 1034.4375,-268.65625 C 1035.6529,-269.21779 1039.4494,-269.78403 1042.1875,-270.15625 C 1045.1965,-270.5653 1045.5102,-270.57183 1047.5625,-270.5 C 1049.5056,-270.43201 1050.5697,-270.33515 1050.75,-270.3125 C 1050.8688,-270.5069 1051.1346,-271.04131 1051.6875,-271.1875 C 1052.4293,-271.38362 1056.8186,-272.01628 1058.9375,-272.28125 C 1060.6939,-272.50086 1063.3428,-272.61356 1065.25,-272.25 C 1065.5669,-272.18959 1065.8558,-272.06062 1066.125,-271.96875 C 1068.0612,-271.30783 1073.9688,-269.03125 1073.9688,-269.03125 C 1073.9687,-269.03125 1067.4321,-271.8378 1066.5938,-272.1875 C 1066.3933,-272.27113 1066.0176,-272.36083 1065.5625,-272.4375 C 1066.7662,-273.08796 1070.5816,-273.80945 1073.2813,-274.4375 C 1076.248,-275.1277 1076.5702,-275.19257 1078.5938,-275.3125 C 1080.6824,-275.4363 1081.875,-275.34375 1081.875,-275.34375 C 1081.875,-275.34374 1081.788,-275.9758 1082.875,-276.375 C 1083.6042,-276.6428 1087.9222,-277.71297 1090,-278.1875 C 1092.0085,-278.64619 1095.1679,-279.2168 1097,-278.8125 C 1098.8781,-278.39804 1110.5782,-275.79687 1110.5782,-275.79687 C 1110.5782,-275.79687 1098.2507,-278.81953 1097.4375,-279.0625 C 1097.243,-279.12062 1096.8789,-279.16876 1096.4375,-279.1875 C 1097.6051,-279.99119 1099.9517,-280.8748 1102.5469,-281.89062 C 1104.2283,-282.5488 1103.4706,-282.26721 1105.3228,-282.89422 C 1107.0764,-283.48788 1107.8082,-283.90493 1107.9532,-284.00721 C 1108.2993,-284.21372 1107.5972,-284.12909 1107.409,-284.04961 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7001);enable-background:new"
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
- <path
- id="path8095"
- d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6949);enable-background:new" />
- <path
- id="path8097"
- d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6961);enable-background:new" />
- <path
- id="path8099"
- d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6957);enable-background:new" />
- <path
- id="path8101"
- d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.501,-280.8173 1114.6376,-279.36691 C 1114.7742,-277.91652 1114.8276,-276.50671 1114.5496,-275.89827 C 1114.2715,-275.28982 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1114.2038,-275.19053 1114.2654,-274.34607 C 1114.3247,-273.53269 1114.1322,-272.70638 1113.7456,-271.54045 C 1113.3544,-270.36044 1111.9004,-267.19047 1111.4599,-266.94168 C 1111.0076,-266.68617 1110.5075,-266.75969 1110.1719,-266.89063 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6997);enable-background:new"
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
- <path
- id="path8103"
- d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6953);enable-background:new" />
- <path
- id="path8105"
- d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6993);enable-background:new" />
- <path
- id="path8107"
- d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6989);enable-background:new" />
- <path
- id="path8109"
- d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6985);enable-background:new" />
- <path
- id="path8111"
- d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6965);enable-background:new" />
- <path
- id="path8113"
- d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6981);enable-background:new" />
- <path
- id="path8115"
- d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6977);enable-background:new" />
- <path
- id="path8117"
- d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6973);enable-background:new" />
- <path
- id="path8119"
- d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
- style="fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter6969);enable-background:new" />
- <g
- id="g8121"
- style="fill:#ffffff;fill-opacity:1;filter:url(#filter7345)">
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8123"
- d="M 744.9375,-212.11731 C 744.9375,-212.11731 752.15979,-215.34049 754,-215.61731 C 755.84021,-215.89413 757.35225,-215.62054 760,-215.05481 C 762.64775,-214.48908 768.7357,-212.83963 771.1875,-211.67981 C 773.6393,-210.51999 776.5,-208.11731 776.5,-208.11731 C 776.5,-208.11731 769.35356,-210.8975 766.3125,-211.67981 C 763.27144,-212.46212 758.66789,-213.76355 755.9375,-213.99231 C 753.20711,-214.22107 744.9375,-212.11731 744.9375,-212.11731 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8125"
- d="M 735.46875,-206.95416 C 735.46875,-206.95416 739.12854,-209.17734 740.96875,-209.45416 C 742.80896,-209.73098 744.6335,-209.20739 747.28125,-208.64166 C 749.929,-208.07593 756.01695,-206.42648 758.46875,-205.26666 C 760.92055,-204.10684 765.03125,-203.14166 765.03125,-203.14166 C 765.03125,-203.14166 756.63481,-204.48435 753.59375,-205.26666 C 750.55269,-206.04897 745.63664,-207.6004 742.90625,-207.82916 C 740.17586,-208.05792 735.46875,-206.95416 735.46875,-206.95416 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8127"
- d="M 759.85042,-217.61116 C 759.85042,-217.61116 768.39412,-220.90973 770.2482,-221.06902 C 772.10229,-221.22832 773.88986,-220.58982 776.4963,-219.85694 C 779.10274,-219.12406 785.07354,-217.091 787.44666,-215.77769 C 789.81978,-214.46438 793.86083,-213.23987 793.86083,-213.23987 C 793.86083,-213.23987 785.5667,-215.11352 782.58152,-216.08754 C 779.59633,-217.06156 774.78883,-218.92232 772.0785,-219.32416 C 769.36817,-219.726 759.85042,-217.61116 759.85042,-217.61116 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- sodipodi:nodetypes="czzzczzc"
- id="path8129"
- d="M 775.19813,-223.2266 C 775.19813,-223.2266 782.96946,-226.00904 784.82644,-226.13009 C 786.68341,-226.25113 788.45744,-225.57592 791.04822,-224.78947 C 793.63899,-224.00302 799.56662,-221.8473 801.91216,-220.48535 C 804.25771,-219.1234 808.27265,-217.81585 808.27265,-217.81585 C 808.27265,-217.81585 800.01892,-219.86008 797.05444,-220.89543 C 794.08997,-221.93078 789.32185,-223.89024 786.62038,-224.34786 C 783.91891,-224.80549 775.19813,-223.2266 775.19813,-223.2266 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8131"
- d="M 789.64298,-227.95417 C 789.64298,-227.95417 798.32554,-231.47448 800.18452,-231.55952 C 802.04349,-231.64455 803.8041,-230.9351 806.37915,-230.09859 C 808.9542,-229.2621 814.83894,-226.99193 817.15766,-225.58479 C 819.47638,-224.17764 823.46523,-222.79255 823.46523,-222.79255 C 823.46523,-222.79255 815.25266,-224.99632 812.3088,-226.08891 C 809.36494,-227.1815 804.63568,-229.23299 801.94358,-229.74288 C 799.25149,-230.25276 789.64298,-227.95417 789.64298,-227.95417 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8133"
- d="M 804.49513,-233.32948 C 804.49513,-233.32948 812.30269,-235.91229 814.16167,-235.99733 C 816.02064,-236.08236 817.78125,-235.37291 820.3563,-234.5364 C 822.93135,-233.69991 828.81609,-231.42974 831.13481,-230.0226 C 833.45353,-228.61545 837.44238,-227.23036 837.44238,-227.23036 C 837.44238,-227.23036 829.22981,-229.43413 826.28595,-230.52672 C 823.34209,-231.61931 818.61283,-233.6708 815.92073,-234.18069 C 813.22864,-234.69057 804.49513,-233.32948 804.49513,-233.32948 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.3190906"
- inkscape:transform-center-x="13.852145"
- sodipodi:nodetypes="czzzczzc"
- id="path8135"
- d="M 819.55763,-237.57948 C 819.55763,-237.57948 828.11519,-240.16229 829.97417,-240.24733 C 831.83314,-240.33236 833.59375,-239.62291 836.1688,-238.7864 C 838.74385,-237.94991 844.62859,-235.67974 846.94731,-234.2726 C 849.26603,-232.86545 853.25488,-231.48036 853.25488,-231.48036 C 853.25488,-231.48036 845.04231,-233.68413 842.09845,-234.77672 C 839.15459,-235.86931 834.42533,-237.9208 831.73323,-238.43069 C 829.04114,-238.94057 819.55763,-237.57948 819.55763,-237.57948 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.9269042"
- inkscape:transform-center-x="13.64141"
- sodipodi:nodetypes="czzzczzc"
- id="path8137"
- d="M 836.23395,-242.60125 C 836.23395,-242.60125 843.20097,-244.58848 845.06179,-244.56882 C 846.9226,-244.54915 848.64052,-243.7418 851.16444,-242.76177 C 853.68837,-241.78177 859.4361,-239.18419 861.672,-237.64886 C 863.9079,-236.11351 867.81253,-234.50625 867.81253,-234.50625 C 867.81253,-234.50625 859.73692,-237.16847 856.85917,-238.42491 C 853.98143,-239.68136 849.37505,-241.99561 846.71589,-242.65612 C 844.05674,-243.31661 836.23395,-242.60125 836.23395,-242.60125 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.1542119"
- inkscape:transform-center-x="13.55068"
- sodipodi:nodetypes="czzzczzc"
- id="path8139"
- d="M 850.73028,-246.00461 C 850.73028,-246.00461 858.41812,-248.03229 860.2781,-247.97315 C 862.13807,-247.914 863.83848,-247.07036 866.34103,-246.03699 C 868.84358,-245.00365 874.5349,-242.28467 876.73771,-240.70224 C 878.94053,-239.11979 882.81016,-237.43004 882.81016,-237.43004 C 882.81016,-237.43004 874.79287,-240.26302 871.94244,-241.58026 C 869.09201,-242.89749 864.53578,-245.30898 861.89124,-246.02576 C 859.2467,-246.74254 850.73028,-246.00461 850.73028,-246.00461 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.4740887"
- inkscape:transform-center-x="13.41151"
- sodipodi:nodetypes="czzzczzc"
- id="path8141"
- d="M 864.82496,-249.21081 C 864.82496,-249.21081 872.99448,-251.17987 874.85184,-251.06477 C 876.70919,-250.94965 878.38342,-250.05521 880.85374,-248.94698 C 883.32405,-247.83877 888.93094,-244.94971 891.08512,-243.30167 C 893.2393,-241.65363 897.05632,-239.84815 897.05632,-239.84815 C 897.05632,-239.84815 889.12793,-242.92121 886.31845,-244.32365 C 883.50896,-245.72609 879.02739,-248.27364 876.40562,-249.06971 C 873.78386,-249.86577 864.82496,-249.21081 864.82496,-249.21081 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.79376"
- inkscape:transform-center-x="13.258805"
- sodipodi:nodetypes="czzzczzc"
- id="path8143"
- d="M 881.38485,-251.60282 C 881.38485,-251.60282 889.47021,-253.51091 891.32322,-253.33946 C 893.17622,-253.16799 894.82252,-252.22313 897.25804,-251.04038 C 899.69357,-249.85767 905.21013,-246.79968 907.31327,-245.08699 C 909.41641,-243.37429 913.17684,-241.45373 913.17684,-241.45373 C 913.17684,-241.45373 905.34544,-244.76613 902.57984,-246.25323 C 899.81423,-247.74035 895.41209,-250.42282 892.8157,-251.29814 C 890.21933,-252.17345 881.38485,-251.60282 881.38485,-251.60282 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8145"
- d="M 896.58415,-254.34724 C 896.58415,-254.34724 904.22581,-255.77494 906.07962,-255.61239 C 907.93342,-255.44983 909.58424,-254.51289 912.02541,-253.34186 C 914.46659,-252.17086 919.99779,-249.1394 922.10913,-247.43684 C 924.22047,-245.73426 927.99009,-243.83179 927.99009,-243.83179 C 927.99009,-243.83179 920.14286,-247.10653 917.37014,-248.58034 C 914.59743,-250.05414 910.18245,-252.71543 907.58189,-253.57827 C 904.98134,-254.44109 896.58415,-254.34724 896.58415,-254.34724 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8147"
- d="M 911.45328,-255.98544 C 911.45328,-255.98544 920.09494,-257.53814 921.94875,-257.37559 C 923.80255,-257.21303 925.45337,-256.27609 927.89454,-255.10506 C 930.33572,-253.93406 935.86692,-250.9026 937.97826,-249.20004 C 940.0896,-247.49746 943.85922,-245.59499 943.85922,-245.59499 C 943.85922,-245.59499 936.01199,-248.86973 933.23927,-250.34354 C 930.46656,-251.81734 926.05158,-254.47863 923.45102,-255.34147 C 920.85047,-256.20429 911.45328,-255.98544 911.45328,-255.98544 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8149"
- d="M 927.70328,-258.29794 C 927.70328,-258.29794 935.34494,-259.16314 937.19875,-259.00059 C 939.05255,-258.83803 940.70337,-257.90109 943.14454,-256.73006 C 945.58572,-255.55906 951.11692,-252.5276 953.22826,-250.82504 C 955.3396,-249.12246 959.10922,-247.21999 959.10922,-247.21999 C 959.10922,-247.21999 951.26199,-250.49473 948.48927,-251.96854 C 945.71656,-253.44234 941.30158,-256.10363 938.70102,-256.96647 C 936.10047,-257.82929 927.70328,-258.29794 927.70328,-258.29794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8151"
- d="M 942.82828,-259.48544 C 942.82828,-259.48544 951.40744,-260.97564 953.26125,-260.81309 C 955.11505,-260.65053 956.76587,-259.71359 959.20704,-258.54256 C 961.64822,-257.37156 967.17942,-254.3401 969.29076,-252.63754 C 971.4021,-250.93496 975.17172,-249.03249 975.17172,-249.03249 C 975.17172,-249.03249 967.32449,-252.30723 964.55177,-253.78104 C 961.77906,-255.25484 957.36408,-257.91613 954.76352,-258.77897 C 952.16297,-259.64179 942.82828,-259.48544 942.82828,-259.48544 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8153"
- d="M 959.07828,-261.54794 C 959.07828,-261.54794 966.90744,-262.35064 968.76125,-262.18809 C 970.61505,-262.02553 972.26587,-261.08859 974.70704,-259.91756 C 977.14822,-258.74656 982.67942,-255.7151 984.79076,-254.01254 C 986.9021,-252.30996 990.67172,-250.40749 990.67172,-250.40749 C 990.67172,-250.40749 982.82449,-253.68223 980.05177,-255.15604 C 977.27906,-256.62984 972.86408,-259.29113 970.26352,-260.15397 C 967.66297,-261.01679 959.07828,-261.54794 959.07828,-261.54794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8155"
- d="M 974.45328,-262.79794 C 974.45328,-262.79794 982.84494,-263.97564 984.69875,-263.81309 C 986.55255,-263.65053 988.20337,-262.71359 990.64454,-261.54256 C 993.08572,-260.37156 998.61692,-257.3401 1000.7283,-255.63754 C 1002.8396,-253.93496 1006.6092,-252.03249 1006.6092,-252.03249 C 1006.6092,-252.03249 998.76199,-255.30723 995.98927,-256.78104 C 993.21656,-258.25484 988.80158,-260.91613 986.20102,-261.77897 C 983.60047,-262.64179 974.45328,-262.79794 974.45328,-262.79794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8157"
- d="M 990.64078,-264.86044 C 990.64078,-264.86044 997.53244,-265.85064 999.38625,-265.68809 C 1001.2401,-265.52553 1002.8909,-264.58859 1005.332,-263.41756 C 1007.7732,-262.24656 1013.3044,-259.2151 1015.4158,-257.51254 C 1017.5271,-255.80996 1021.2967,-253.90749 1021.2967,-253.90749 C 1021.2967,-253.90749 1013.4495,-257.18223 1010.6768,-258.65604 C 1007.9041,-260.12984 1003.4891,-262.79113 1000.8885,-263.65397 C 998.28797,-264.51679 990.64078,-264.86044 990.64078,-264.86044 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8159"
- d="M 1007.7658,-265.79794 C 1007.7658,-265.79794 1014.5949,-266.97564 1016.4488,-266.81309 C 1018.3026,-266.65053 1019.9534,-265.71359 1022.3945,-264.54256 C 1024.8357,-263.37156 1030.3669,-260.3401 1032.4783,-258.63754 C 1034.5896,-256.93496 1038.3592,-255.03249 1038.3592,-255.03249 C 1038.3592,-255.03249 1030.512,-258.30723 1027.7393,-259.78104 C 1024.9666,-261.25484 1020.5516,-263.91613 1017.951,-264.77897 C 1015.3505,-265.64179 1007.7658,-265.79794 1007.7658,-265.79794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8161"
- d="M 1023.8908,-267.79794 C 1023.8908,-267.79794 1029.9699,-268.22564 1031.8238,-268.06309 C 1033.6776,-267.90053 1035.3284,-266.96359 1037.7695,-265.79256 C 1040.2107,-264.62156 1045.7419,-261.5901 1047.8533,-259.88754 C 1049.9646,-258.18496 1053.7342,-256.28249 1053.7342,-256.28249 C 1053.7342,-256.28249 1045.887,-259.55723 1043.1143,-261.03104 C 1040.3416,-262.50484 1035.9266,-265.16613 1033.326,-266.02897 C 1030.7255,-266.89179 1023.8908,-267.79794 1023.8908,-267.79794 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.7433893"
- inkscape:transform-center-x="13.28378"
- sodipodi:nodetypes="czzzczzc"
- id="path8163"
- d="M 1039.7033,-269.17294 C 1039.7033,-269.17294 1046.1574,-269.85064 1048.0113,-269.68809 C 1049.8651,-269.52553 1051.5159,-268.58859 1053.957,-267.41756 C 1056.3982,-266.24656 1061.9294,-263.2151 1064.0408,-261.51254 C 1066.1521,-259.80996 1069.9217,-257.90749 1069.9217,-257.90749 C 1069.9217,-257.90749 1062.0745,-261.18223 1059.3018,-262.65604 C 1056.5291,-264.12984 1052.1141,-266.79113 1049.5135,-267.65397 C 1046.913,-268.51679 1039.7033,-269.17294 1039.7033,-269.17294 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-5.1360724"
- inkscape:transform-center-x="13.55813"
- sodipodi:nodetypes="czzzczzc"
- id="path8165"
- d="M 1055.2718,-271.03319 C 1055.2718,-271.03319 1060.7694,-271.94264 1062.6296,-271.88667 C 1064.4897,-271.83067 1066.1915,-270.98993 1068.6957,-269.96081 C 1071.2001,-268.93171 1076.896,-266.22241 1079.1015,-264.64372 C 1081.307,-263.06501 1085.1795,-261.38182 1085.1795,-261.38182 C 1085.1795,-261.38182 1077.1575,-264.20121 1074.3047,-265.5136 C 1071.4521,-266.82598 1066.8918,-269.22973 1064.246,-269.94203 C 1061.6003,-270.65431 1055.2718,-271.03319 1055.2718,-271.03319 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.6370147"
- inkscape:transform-center-x="13.74758"
- sodipodi:nodetypes="czzzczzc"
- id="path8167"
- d="M 1072.7007,-273.48537 C 1072.7007,-273.48537 1077.2479,-274.64118 1079.1087,-274.67158 C 1080.9694,-274.70196 1082.7083,-273.94109 1085.2576,-273.02927 C 1087.807,-272.1175 1093.6225,-269.67541 1095.899,-268.20077 C 1098.1753,-266.72609 1102.1217,-265.22441 1102.1217,-265.22441 C 1102.1217,-265.22441 1093.9775,-267.66852 1091.067,-268.84713 C 1088.1565,-270.02573 1083.4896,-272.21528 1080.8136,-272.80404 C 1078.1377,-273.39279 1072.7007,-273.48537 1072.7007,-273.48537 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- inkscape:transform-center-y="-4.4842392"
- inkscape:transform-center-x="13.79933"
- sodipodi:nodetypes="czzzczzc"
- id="path8169"
- d="M 1087.1585,-276.5244 C 1087.1585,-276.5244 1093.1185,-278.29795 1094.9787,-278.35464 C 1096.8387,-278.41131 1098.5883,-277.67509 1101.1502,-276.79939 C 1103.7122,-275.92373 1103.6728,-275.94226 1106.4837,-275.30924 C 1109.2806,-274.67938 1113.5604,-273.79611 1113.5604,-273.79611 C 1113.5604,-273.79611 1109.9449,-273.81239 1106.7681,-274.26225 C 1103.6526,-274.70344 1099.3938,-275.9605 1096.7097,-276.51138 C 1094.0258,-277.06226 1087.1585,-276.5244 1087.1585,-276.5244 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new" />
- <path
- sodipodi:nodetypes="czczc"
- id="path8171"
- d="M 1099.25,-279.92981 C 1099.4112,-279.66119 1110.4581,-284.53027 1111.4375,-284.61731 C 1112.4169,-284.70435 1113.4375,-281.49231 1113.4375,-281.49231 C 1113.4375,-281.49231 1112.6624,-282.99665 1110.5625,-282.55481 C 1108.4626,-282.11297 1099.2616,-279.8834 1099.25,-279.92981 z"
- style="fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1" />
- </g>
- <path
- id="path8173"
- d="M 1107.4532,-284.0938 C 1107.0345,-283.88097 1107.2976,-283.99991 1106.806,-283.78799 C 1106.3199,-283.57845 1105.0826,-283.2136 1102.7264,-282.32904 C 1099.3953,-281.07847 1096.8962,-280.1756 1095.7005,-279.26294 C 1094.1644,-279.24168 1091.98,-279.02963 1090.0442,-278.54419 C 1087.0627,-277.79653 1085.189,-277.37018 1083.2942,-276.95044 C 1081.3994,-276.53072 1081.6187,-276.30825 1080.4192,-276.07544 C 1079.1226,-275.82378 1078.6978,-276.08443 1074.9817,-275.29419 C 1071.4918,-274.55205 1066.0869,-273.36312 1064.8255,-272.60669 C 1063.2416,-272.78748 1060.958,-272.92847 1058.9817,-272.63794 C 1055.9413,-272.19099 1054.0655,-271.96518 1052.138,-271.73169 C 1051.4826,-271.65232 1051.0969,-271.53091 1050.7942,-271.45044 C 1050.368,-271.31879 1050.1084,-271.19042 1049.4192,-271.10669 C 1048.1076,-270.94733 1047.657,-271.26352 1043.888,-270.82544 C 1040.3341,-270.41236 1034.8826,-269.55262 1033.638,-268.88794 C 1032.039,-269.18524 1029.7802,-269.42213 1027.7942,-269.23169 C 1024.7354,-268.93838 1022.8222,-268.7477 1020.888,-268.57544 C 1018.9537,-268.40318 1019.1993,-268.15307 1017.9817,-268.04419 C 1016.6655,-267.9265 1016.2219,-268.20782 1012.4505,-267.79419 C 1008.9086,-267.40575 1003.4426,-266.58492 1002.1692,-265.91919 C 1000.5703,-266.21389 998.28202,-266.4262 996.29419,-266.23169 C 993.23595,-265.93245 991.35306,-265.75145 989.41919,-265.57544 C 988.7617,-265.5156 988.37915,-265.39688 988.07544,-265.32544 C 987.64779,-265.20649 987.39193,-265.10737 986.70044,-265.04419 C 985.38448,-264.92394 984.94068,-265.23907 981.16919,-264.82544 C 977.61305,-264.43543 972.16365,-263.58628 970.91919,-262.91919 C 969.32056,-263.21338 967.05935,-263.44291 965.07544,-263.23169 C 962.01984,-262.90637 960.1014,-262.70545 958.16919,-262.51294 C 956.23698,-262.32044 956.47932,-262.07206 955.26294,-261.95044 C 953.94806,-261.81898 953.49996,-262.11498 949.73169,-261.66919 C 946.19282,-261.25054 940.75401,-260.37702 939.48169,-259.70044 C 937.88414,-259.98149 935.62173,-260.12087 933.63794,-259.88794 C 930.58596,-259.52958 928.69286,-259.32008 926.76294,-259.10669 C 926.10674,-259.03414 925.72228,-258.934 925.41919,-258.85669 C 924.99242,-258.72947 924.73428,-258.58949 924.04419,-258.51294 C 922.73086,-258.36726 922.27673,-258.68696 918.51294,-258.20044 C 914.96405,-257.74169 909.53431,-256.78142 908.29419,-256.07544 C 906.70114,-256.31968 904.46038,-256.45679 902.48169,-256.20044 C 899.4341,-255.80563 897.53098,-255.55199 895.60669,-255.29419 C 893.68241,-255.0364 893.88058,-254.80066 892.66919,-254.63794 C 891.35973,-254.46204 890.922,-254.74232 887.16919,-254.16919 C 883.6449,-253.63095 878.24604,-252.47002 876.98169,-251.73169 C 875.39419,-251.93523 873.13619,-251.98642 871.16919,-251.63794 C 868.14302,-251.10182 866.2703,-250.77625 864.35669,-250.45044 C 863.70608,-250.33967 863.34298,-250.1795 863.04419,-250.07544 C 862.62352,-249.91056 862.38074,-249.74414 861.70044,-249.60669 C 860.40579,-249.3451 859.97332,-249.61289 856.26294,-248.79419 C 852.76441,-248.02224 847.41699,-246.41126 846.20044,-245.57544 C 844.63766,-245.65289 842.44286,-245.49016 840.51294,-244.98169 C 837.5405,-244.19856 835.69533,-243.7496 833.82544,-243.23169 C 831.95556,-242.71379 832.15884,-242.46441 830.98169,-242.13794 C 829.70923,-241.78504 829.28466,-242.03085 825.63794,-240.95044 C 822.21324,-239.93581 816.9885,-238.01727 815.76294,-237.10669 C 814.22411,-237.09395 812.04311,-236.83447 810.13794,-236.23169 C 807.20688,-235.30435 805.38763,-234.77327 803.54419,-234.16919 C 802.91743,-233.96381 802.55246,-233.77661 802.26294,-233.63794 C 801.85531,-233.42433 801.6096,-233.22919 800.95044,-233.01294 C 799.69598,-232.6014 799.26433,-232.8239 795.66919,-231.57544 C 792.27934,-230.39827 787.07421,-228.36174 785.88794,-227.41919 C 784.36405,-227.35952 782.23789,-227.02432 780.35669,-226.35669 C 777.4593,-225.3284 775.65761,-224.68121 773.82544,-224.04419 C 771.99327,-223.40718 772.19759,-223.19565 771.04419,-222.79419 C 769.79741,-222.36023 769.38058,-222.59447 765.82544,-221.23169 C 762.48677,-219.95189 757.33829,-217.74914 756.13794,-216.76294 C 754.63076,-216.65525 752.50225,-216.26414 750.63794,-215.54419 C 747.76976,-214.43659 746.01414,-213.76263 744.20044,-213.07544 C 743.58378,-212.84181 743.20403,-212.63341 742.91919,-212.48169 C 742.91919,-212.48169 742.91919,-211.38794 742.91919,-211.38794 C 743.03097,-211.6103 743.30518,-212.20537 743.82544,-212.48169 C 744.52341,-212.85241 748.63907,-214.47506 750.63794,-215.20044 C 752.2948,-215.80169 754.79183,-216.52912 756.60669,-216.51294 C 756.90831,-216.51025 757.19431,-216.46204 757.45044,-216.41919 C 759.29293,-216.11094 764.91919,-214.85669 764.91919,-214.85669 C 764.91918,-214.85669 758.6857,-216.50344 757.88794,-216.70044 C 757.69715,-216.74755 757.35222,-216.76916 756.91919,-216.76294 C 758.06465,-217.63265 761.68019,-219.15645 764.26294,-220.20044 C 767.10116,-221.34771 767.37975,-221.45226 769.32544,-221.85669 C 771.33374,-222.27413 772.48169,-222.35669 772.48169,-222.35669 C 772.48169,-222.35668 772.39933,-222.95783 773.45044,-223.48169 C 774.15554,-223.8331 778.33746,-225.37409 780.35669,-226.04419 C 782.30859,-226.69192 785.41409,-227.40269 787.23169,-227.04419 C 789.09492,-226.67669 794.76294,-225.23169 794.76294,-225.23169 C 794.76295,-225.23169 788.47594,-227.1028 787.66919,-227.32544 C 787.47627,-227.37869 787.13835,-227.41148 786.70044,-227.41919 C 787.85878,-228.25207 791.49488,-229.61451 794.10669,-230.57544 C 796.97685,-231.63145 797.27403,-231.73724 799.23169,-232.10669 C 801.08518,-232.45648 802.09053,-232.53217 802.26294,-232.54419 C 802.37654,-232.76143 802.64039,-233.35421 803.16919,-233.60669 C 803.87863,-233.94543 808.09526,-235.31944 810.13794,-235.91919 C 811.83111,-236.4163 814.37871,-236.95596 816.23169,-236.82544 C 816.53964,-236.80376 816.84518,-236.72818 817.10669,-236.66919 C 818.98787,-236.24487 824.70044,-234.63794 824.70044,-234.63794 C 824.70045,-234.63794 818.3587,-236.70319 817.54419,-236.95044 C 817.3494,-237.00958 816.98631,-237.05438 816.54419,-237.07544 C 817.71368,-237.87299 821.40721,-239.13166 824.04419,-240.01294 C 826.942,-240.98141 827.2772,-241.01626 829.26294,-241.29419 C 831.31259,-241.58108 832.45044,-241.60669 832.45044,-241.60669 C 832.45042,-241.60669 832.37769,-242.21366 833.45044,-242.66919 C 834.17004,-242.97476 838.44142,-244.16994 840.51294,-244.66919 C 842.51538,-245.15177 845.71143,-245.59748 847.57544,-245.07544 C 849.48622,-244.54029 855.29419,-242.57544 855.29419,-242.57544 C 855.29419,-242.57544 848.87153,-244.99895 848.04419,-245.29419 C 847.84635,-245.3648 847.46203,-245.43458 847.01294,-245.48169 C 848.20084,-246.21034 851.92821,-247.25577 854.60669,-247.98169 C 857.55011,-248.77944 857.89877,-248.75252 859.91919,-248.88794 C 861.83208,-249.01617 862.86624,-248.95903 863.04419,-248.95044 C 863.16147,-249.1541 863.43595,-249.72992 863.98169,-249.91919 C 864.71388,-250.17313 869.06021,-250.96708 871.16919,-251.29419 C 872.91732,-251.5653 875.57007,-251.77889 877.48169,-251.38794 C 877.79935,-251.32298 878.08691,-251.20243 878.35669,-251.10669 C 880.29743,-250.41796 886.20044,-248.01294 886.20044,-248.01294 C 886.20045,-248.01294 879.66573,-250.96371 878.82544,-251.32544 C 878.62447,-251.41195 878.25031,-251.49223 877.79419,-251.57544 C 879.00069,-252.20862 882.82375,-252.97104 885.54419,-253.48169 C 888.53372,-254.04288 888.84442,-254.01123 890.88794,-254.01294 C 892.9972,-254.01471 894.20044,-253.88794 894.20044,-253.88794 C 894.20044,-253.88793 894.12773,-254.51913 895.23169,-254.82544 C 895.97221,-255.03091 900.35781,-255.65931 902.48169,-255.88794 C 904.53471,-256.10893 907.80032,-256.14016 909.70044,-255.41919 C 911.64823,-254.68012 917.54419,-252.04419 917.54419,-252.04419 C 917.54421,-252.04419 910.98131,-255.22316 910.13794,-255.60669 C 909.93626,-255.69842 909.59573,-255.7929 909.13794,-255.88794 C 910.34886,-256.48982 914.12236,-257.13678 916.85669,-257.54419 C 919.86149,-257.99191 920.1822,-257.99589 922.23169,-257.95044 C 924.17214,-257.90742 925.23868,-257.75621 925.41919,-257.73169 C 925.53811,-257.92485 925.80309,-258.49752 926.35669,-258.63794 C 927.0994,-258.82632 931.51098,-259.37222 933.63794,-259.57544 C 935.40097,-259.74386 938.05803,-259.80973 939.98169,-259.32544 C 940.30137,-259.24496 940.5852,-259.12185 940.85669,-259.01294 C 942.80962,-258.22945 948.76294,-255.54419 948.76294,-255.54419 C 948.76292,-255.54419 942.17103,-258.79767 941.32544,-259.20044 C 941.12322,-259.29676 940.75318,-259.40747 940.29419,-259.51294 C 941.50833,-260.08721 945.33785,-260.63513 948.07544,-261.01294 C 951.08382,-261.42814 951.39851,-261.45557 953.45044,-261.38794 C 955.56842,-261.31813 956.76294,-261.13794 956.76294,-261.13794 C 956.76292,-261.13794 956.68569,-261.77535 957.79419,-262.04419 C 958.53781,-262.22454 962.94595,-262.70774 965.07544,-262.88794 C 967.13391,-263.06211 970.41868,-263.01226 972.32544,-262.23169 C 974.28003,-261.43153 980.20044,-258.70044 980.20044,-258.70044 C 980.20042,-258.70044 973.64051,-262.0092 972.79419,-262.41919 C 972.59182,-262.51724 972.22233,-262.62229 971.76294,-262.73169 C 972.97811,-263.29559 976.77302,-263.84599 979.51294,-264.20044 C 982.52385,-264.58996 982.83425,-264.59809 984.88794,-264.51294 C 986.83233,-264.43234 987.89457,-264.2597 988.07544,-264.23169 C 988.1946,-264.42255 988.45821,-264.977 989.01294,-265.10669 C 989.7572,-265.28069 994.16287,-265.75716 996.29419,-265.91919 C 998.06081,-266.05346 1000.7439,-266.0449 1002.6692,-265.54419 C 1002.9892,-265.46098 1003.2725,-265.34292 1003.5442,-265.23169 C 1005.4988,-264.43153 1011.4505,-261.66919 1011.4505,-261.66919 C 1011.4504,-261.66919 1004.8593,-265.0092 1004.013,-265.41919 C 1003.8106,-265.51724 1003.4411,-265.6223 1002.9817,-265.73169 C 1004.1968,-266.29559 1008.023,-266.81475 1010.763,-267.16919 C 1013.7739,-267.55872 1014.1155,-267.59809 1016.1692,-267.51294 C 1018.2889,-267.42506 1019.4817,-267.20044 1019.4817,-267.20044 C 1019.4817,-267.20044 1019.4033,-267.84946 1020.513,-268.10669 C 1021.2573,-268.27925 1025.6625,-268.73005 1027.7942,-268.88794 C 1029.8548,-269.04054 1033.1371,-268.98471 1035.0442,-268.20044 C 1036.9992,-267.39649 1042.9192,-264.70044 1042.9192,-264.70044 C 1042.9192,-264.70044 1036.3594,-267.97631 1035.513,-268.38794 C 1035.3105,-268.48638 1034.9412,-268.59016 1034.4817,-268.70044 C 1035.6971,-269.26198 1039.4936,-269.82822 1042.2317,-270.20044 C 1045.2407,-270.60949 1045.5544,-270.61602 1047.6067,-270.54419 C 1049.5498,-270.4762 1050.6139,-270.37934 1050.7942,-270.35669 C 1050.913,-270.55109 1051.1788,-271.0855 1051.7317,-271.23169 C 1052.4735,-271.42781 1056.8628,-272.06047 1058.9817,-272.32544 C 1060.7381,-272.54505 1063.387,-272.65775 1065.2942,-272.29419 C 1065.6111,-272.23378 1065.9,-272.10481 1066.1692,-272.01294 C 1068.1054,-271.35202 1074.013,-269.07544 1074.013,-269.07544 C 1074.0129,-269.07544 1067.4763,-271.88199 1066.638,-272.23169 C 1066.4375,-272.31532 1066.0618,-272.40502 1065.6067,-272.48169 C 1066.8104,-273.13215 1070.6258,-273.85364 1073.3255,-274.48169 C 1076.2922,-275.17189 1076.6144,-275.23676 1078.638,-275.35669 C 1080.7266,-275.48049 1081.9192,-275.38794 1081.9192,-275.38794 C 1081.9192,-275.38793 1081.8322,-276.01999 1082.9192,-276.41919 C 1083.6484,-276.68699 1087.9664,-277.75716 1090.0442,-278.23169 C 1092.0527,-278.69038 1095.2121,-279.26099 1097.0442,-278.85669 C 1098.9223,-278.44223 1110.6224,-275.84106 1110.6224,-275.84106 C 1110.6224,-275.84106 1098.2949,-278.86372 1097.4817,-279.10669 C 1097.2872,-279.16481 1096.9231,-279.21295 1096.4817,-279.23169 C 1097.6493,-280.03538 1099.9959,-280.91899 1102.5911,-281.93481 C 1104.2725,-282.59299 1103.5148,-282.3114 1105.367,-282.93841 C 1107.1206,-283.53207 1107.8524,-283.94912 1107.9974,-284.0514 C 1108.3435,-284.25791 1107.6414,-284.17328 1107.4532,-284.0938 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7333);enable-background:new"
- sodipodi:nodetypes="czscsssscssssscsssscssssscsssscssssscsssscssssscsssscssssscsssscssccsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscsssscscsscssscscsscc" />
- <path
- id="path8175"
- d="M 1082.625,-275.125 C 1084.498,-274.73152 1087.1211,-273.97945 1088.6563,-273.15625 C 1090.1915,-272.33306 1091.4785,-272.10025 1094.0313,-270.65625 C 1096.5579,-269.22699 1098.8271,-268.64929 1101,-268.125 C 1103.3476,-267.55858 1106.4354,-267.40977 1109.8438,-266.9375 C 1108.7549,-267.77725 1103.2364,-268.10995 1101.4375,-268.5 C 1099.6386,-268.89006 1097.5434,-269.51616 1094.8438,-270.8125 C 1092.1441,-272.10884 1091.3494,-272.61146 1089.0313,-273.5 C 1086.7131,-274.38854 1085.0269,-274.88314 1082.625,-275.125 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7285);enable-background:new" />
- <path
- id="path8177"
- d="M 1051.4688,-270 C 1053.3741,-269.42241 1055.9969,-268.38428 1057.5625,-267.40625 C 1059.1281,-266.42823 1060.4427,-266.04644 1063.0625,-264.28125 C 1065.6555,-262.53409 1068.0484,-261.57198 1070.3125,-260.6875 C 1072.7586,-259.73193 1075.9951,-259.03037 1079.7188,-257.625 C 1078.5292,-258.76284 1072.6557,-260.31175 1070.7813,-261 C 1068.9068,-261.68825 1066.6995,-262.5662 1063.9063,-264.28125 C 1061.113,-265.99629 1060.3327,-266.56515 1057.9688,-267.6875 C 1055.6047,-268.80984 1053.9121,-269.52205 1051.4688,-270 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7289);enable-background:new" />
- <path
- id="path8179"
- d="M 1020.2188,-266.84375 C 1022.1307,-266.20564 1024.8,-265.08839 1026.375,-264.03125 C 1027.9501,-262.9741 1029.2706,-262.52258 1031.9063,-260.625 C 1034.5149,-258.74679 1036.9347,-257.59497 1039.2188,-256.5625 C 1041.6865,-255.44705 1044.9833,-254.3892 1048.75,-252.71875 C 1047.5467,-253.94128 1041.5472,-256.03298 1039.6563,-256.84375 C 1037.7653,-257.65452 1035.5914,-258.73754 1032.7813,-260.59375 C 1029.9711,-262.44995 1029.1595,-263.07068 1026.7813,-264.3125 C 1024.403,-265.5543 1022.6706,-266.28819 1020.2188,-266.84375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7293);enable-background:new" />
- <path
- id="path8181"
- d="M 1110.1719,-266.89063 C 1110.3227,-266.84207 1110.8599,-266.25963 1110.2813,-265.40625 C 1109.4712,-264.21166 1104.5764,-262.08196 1101.7188,-261.28125 C 1098.8739,-260.48413 1095.4287,-260.30351 1091.1563,-261.65625 C 1086.8547,-263.0182 1085.6866,-264.12497 1080.5,-265.96875 C 1085.164,-263.85358 1086.6953,-262.01642 1090.625,-260.625 C 1092.2457,-260.05113 1093.9921,-259.6854 1095.6875,-259.59375 C 1095.2424,-259.26812 1094.1572,-258.61045 1092.125,-258 C 1089.3295,-257.16031 1085.4759,-256.46622 1083.875,-256.375 C 1082.3604,-256.28868 1080.733,-256.88749 1080.4375,-257 C 1080.6042,-256.89692 1080.8107,-256.62266 1080.1875,-255.96875 C 1079.2882,-255.02512 1074.0401,-254.04575 1071.0625,-253.71875 C 1068.0982,-253.3932 1064.5409,-253.73471 1060.1563,-255.625 C 1056.1783,-257.33997 1054.8173,-258.54036 1050.75,-260.375 C 1050.75,-260.375 1050.75,-260.21875 1050.75,-260.21875 C 1054.3931,-258.12346 1056.034,-256.33548 1059.625,-254.65625 C 1061.3552,-253.84716 1063.2167,-253.24749 1065.0313,-252.9375 C 1064.4964,-252.65074 1063.4735,-252.22599 1061.5938,-251.90625 C 1058.7248,-251.41829 1054.7848,-251.09011 1053.1563,-251.15625 C 1052.3056,-251.19079 1051.4277,-251.34062 1050.75,-251.5625 C 1050.0652,-251.77738 1049.5603,-252.00717 1049.4375,-252.0625 C 1049.6069,-251.95529 1049.8686,-251.65962 1049.2188,-251.03125 C 1048.3091,-250.15163 1042.9727,-249.69487 1039.9688,-249.5625 C 1036.9783,-249.43071 1033.3799,-250.01313 1028.9688,-252.125 C 1024.5276,-254.25126 1023.3273,-255.5266 1018.0625,-257.90625 C 1022.7968,-255.30921 1024.349,-253.27715 1028.4063,-251.1875 C 1030.0796,-250.32565 1031.8915,-249.69325 1033.6563,-249.25 C 1033.193,-249.01668 1032.0669,-248.56186 1029.9688,-248.3125 C 1027.0825,-247.96952 1023.1342,-247.81962 1021.5,-247.9375 C 1019.9538,-248.049 1018.2688,-248.79446 1017.9688,-248.9375 C 1018.1379,-248.81721 1018.3826,-248.52702 1017.75,-247.9375 C 1016.8372,-247.08677 1011.5059,-246.67538 1008.5,-246.5625 C 1005.5075,-246.45013 1001.9103,-247.05293 997.5,-249.15625 C 993.49875,-251.06448 992.11197,-252.29408 988.03125,-254.25 C 988.03122,-254.25 988.03125,-254.09375 988.03125,-254.09375 C 991.68631,-251.88983 993.32546,-250.0412 996.9375,-248.1875 C 998.67779,-247.29435 1000.5745,-246.65923 1002.4063,-246.21875 C 1001.8663,-245.97045 1000.8282,-245.60342 998.9375,-245.375 C 996.05182,-245.02642 992.07145,-244.85405 990.4375,-244.96875 C 989.58405,-245.02865 988.71119,-245.22666 988.03125,-245.46875 C 987.34415,-245.70405 986.8419,-245.94101 986.71875,-246 C 986.88873,-245.88773 987.18323,-245.57775 986.53125,-244.96875 C 985.6186,-244.11625 980.25592,-243.67538 977.25,-243.5625 C 974.25754,-243.45013 970.65654,-244.09055 966.25,-246.15625 C 961.81347,-248.23603 960.60312,-249.48796 955.34375,-251.8125 C 960.07313,-249.26501 961.63449,-247.2347 965.6875,-245.1875 C 967.35905,-244.34317 969.17304,-243.72107 970.9375,-243.28125 C 970.47427,-243.04703 969.3478,-242.59718 967.25,-242.34375 C 964.36431,-241.99517 960.4138,-241.77423 958.78125,-241.875 C 957.23669,-241.97032 955.58094,-242.70385 955.28125,-242.84375 C 955.45024,-242.72522 955.66317,-242.4399 955.03125,-241.84375 C 954.11939,-240.98347 948.7846,-240.5135 945.78125,-240.375 C 942.7913,-240.2371 939.2138,-240.82568 934.8125,-242.84375 C 930.81942,-244.67464 929.44739,-245.87295 925.375,-247.75 C 925.37498,-247.75 925.375,-247.59375 925.375,-247.59375 C 929.02261,-245.46048 930.64533,-243.65888 934.25,-241.875 C 935.98675,-241.01549 937.85727,-240.42486 939.6875,-240 C 939.14803,-239.7471 938.13687,-239.35871 936.25,-239.09375 C 933.37022,-238.68939 929.41187,-238.44813 927.78125,-238.53125 C 926.92953,-238.57466 926.05355,-238.7398 925.375,-238.96875 C 924.68931,-239.19076 924.1854,-239.41214 924.0625,-239.46875 C 924.23209,-239.35976 924.4944,-239.0591 923.84375,-238.4375 C 922.93296,-237.56736 917.59354,-237.04598 914.59375,-236.875 C 911.60742,-236.70479 908.01994,-237.19077 903.625,-239.15625 C 899.20011,-241.13513 898.01904,-242.38444 892.78125,-244.53125 C 897.49122,-242.14358 899.05142,-240.14252 903.09375,-238.1875 C 904.7609,-237.38119 906.55418,-236.79092 908.3125,-236.40625 C 907.85087,-236.15755 906.7155,-235.694 904.625,-235.375 C 901.7494,-234.93624 897.8446,-234.6419 896.21875,-234.6875 C 894.68052,-234.73062 892.98595,-235.43272 892.6875,-235.5625 C 892.85583,-235.44968 893.09807,-235.14875 892.46875,-234.53125 C 891.56063,-233.64015 886.2658,-233.003 883.28125,-232.71875 C 880.31007,-232.43577 876.70783,-232.89455 872.34375,-234.65625 C 868.38441,-236.25456 867.0146,-237.45112 863,-238.96875 C 863.00003,-238.96875 863,-238.8125 863,-238.8125 C 866.5959,-237.00115 868.23831,-235.23017 871.8125,-233.65625 C 873.53457,-232.8979 875.39998,-232.3673 877.21875,-232.03125 C 876.68266,-231.75217 875.65217,-231.34362 873.78125,-230.96875 C 870.92586,-230.39665 866.99183,-229.94936 865.375,-229.9375 C 864.53049,-229.93129 863.66892,-230.01844 863,-230.1875 C 862.32409,-230.34901 861.83991,-230.51673 861.71875,-230.5625 C 861.88597,-230.46848 862.14142,-230.17902 861.5,-229.5 C 860.60213,-228.54948 855.31352,-227.58292 852.375,-227.0625 C 849.44966,-226.54441 845.94285,-226.68826 841.65625,-228.09375 C 837.34045,-229.50882 836.18348,-230.62369 831.09375,-232.0625 C 835.6706,-230.31149 837.1823,-228.50244 841.125,-227.0625 C 842.75108,-226.46861 844.49385,-226.10685 846.21875,-225.90625 C 845.7659,-225.60923 844.66397,-225.02286 842.625,-224.4375 C 839.82028,-223.63233 835.98614,-222.86167 834.40625,-222.6875 C 832.9115,-222.5227 831.29002,-223.00431 831,-223.09375 C 831.16356,-223.00368 831.39278,-222.73382 830.78125,-222.03125 C 829.89878,-221.0174 824.73673,-219.6596 821.84375,-218.96875 C 818.96373,-218.28097 815.50815,-218.20873 811.28125,-219.40625 C 807.4464,-220.4927 806.10867,-221.47862 802.21875,-222.53125 C 802.21874,-222.53125 802.21875,-222.375 802.21875,-222.375 C 805.70293,-220.98015 807.28816,-219.4556 810.75,-218.34375 C 812.41793,-217.80803 814.20578,-217.55701 815.96875,-217.46875 C 815.44911,-217.11663 814.46836,-216.55423 812.65625,-215.9375 C 809.89059,-214.99625 806.06601,-214.00213 804.5,-213.78125 C 803.68206,-213.66586 802.8669,-213.65842 802.21875,-213.75 C 801.56379,-213.83321 801.08615,-213.96827 800.96875,-214 C 801.13079,-213.92536 801.40274,-213.65956 800.78125,-212.90625 C 799.91125,-211.85172 794.77162,-210.247 791.90625,-209.46875 C 789.05372,-208.69399 785.64713,-208.51055 781.46875,-209.5625 C 777.26192,-210.62163 776.11206,-211.60416 771.125,-212.71875 C 775.60954,-211.25929 777.09435,-209.58352 780.9375,-208.46875 C 782.52254,-208.00898 784.22429,-207.8305 785.90625,-207.78125 C 785.46468,-207.44449 784.39374,-206.75352 782.40625,-206 C 779.67232,-204.96351 775.95427,-203.83731 774.40625,-203.5625 C 772.94163,-203.30248 771.34667,-203.67904 771.0625,-203.75 C 771.22275,-203.67035 771.44294,-203.42902 770.84375,-202.6875 C 769.97909,-201.61744 764.92723,-199.86935 762.09375,-199 C 759.27295,-198.13453 755.88625,-197.84369 751.75,-198.78125 C 747.99741,-199.63186 746.70215,-200.49772 742.875,-201.375 C 742.875,-201.375 742.875,-201.21875 742.875,-201.21875 C 746.30296,-199.98096 747.86241,-198.58645 751.25,-197.6875 C 752.88216,-197.25436 754.61704,-197.10449 756.34375,-197.125 C 755.83482,-196.74083 754.867,-196.10318 753.09375,-195.375 C 750.38741,-194.26366 746.65742,-193.06719 745.125,-192.75 C 744.3246,-192.58431 743.51269,-192.53138 742.875,-192.59375 C 742.875,-192.59375 742.875,-192.07823 742.875,-191.67146 C 742.875,-191.40639 742.875,-191.1875 742.875,-191.1875 C 743.10145,-191.33218 743.32391,-191.46011 743.59375,-191.5625 C 744.67427,-191.97248 745.76536,-191.77827 749.59375,-193.25 C 753.42218,-194.72174 754.81787,-195.25498 755.5,-195.65625 C 756.1796,-196.05603 757.11165,-196.53562 757.71875,-197.1875 C 759.5456,-197.32525 761.2895,-197.68073 762.65625,-198.1875 C 765.62437,-199.28802 767.53162,-199.99369 769.4375,-200.65625 C 771.34336,-201.31879 771.79159,-202.07112 772.84375,-202.4375 C 773.9353,-202.81761 775.03886,-202.60288 778.90625,-203.96875 C 782.7737,-205.33461 784.18941,-205.79583 784.875,-206.1875 C 785.57609,-206.58802 786.57581,-207.12048 787.1875,-207.78125 C 789.1583,-207.83591 791.00435,-208.16588 792.46875,-208.65625 C 795.47023,-209.66133 797.3949,-210.27796 799.3125,-210.90625 C 800.8511,-211.41035 801.48652,-211.95302 802.21875,-212.34375 C 802.44891,-212.47806 802.69449,-212.59748 802.96875,-212.6875 C 804.06698,-213.04798 805.1502,-212.76887 809.0625,-214 C 812.97483,-215.23113 814.42855,-215.67295 815.125,-216.03125 C 815.81888,-216.38822 816.75515,-216.82386 817.375,-217.4375 C 819.24021,-217.46016 821.01081,-217.70433 822.40625,-218.125 C 825.43668,-219.03854 827.39863,-219.5551 829.34375,-220.09375 C 831.28886,-220.63239 831.76993,-221.35827 832.84375,-221.65625 C 833.95776,-221.9654 835.06369,-221.64886 839.03125,-222.6875 C 842.99886,-223.72613 844.44883,-224.12023 845.15625,-224.4375 C 845.89112,-224.76709 846.97008,-225.19122 847.59375,-225.8125 C 849.59149,-225.6965 851.45118,-225.83259 852.9375,-226.1875 C 856.01561,-226.9225 858.02094,-227.28844 860,-227.6875 C 861.58792,-228.00768 862.24429,-228.47805 863,-228.78125 C 863.23757,-228.88805 863.46695,-228.97401 863.75,-229.03125 C 864.88347,-229.26044 866.05448,-228.82232 870.09375,-229.53125 C 874.13308,-230.24018 875.594,-230.45834 876.3125,-230.71875 C 877.02836,-230.97819 878.01678,-231.28599 878.65625,-231.8125 C 880.58052,-231.57301 882.40413,-231.58797 883.84375,-231.8125 C 886.97008,-232.30012 888.9983,-232.51317 891,-232.78125 C 893.00171,-233.04932 893.48869,-233.72639 894.59375,-233.875 C 895.74014,-234.02918 896.86967,-233.57343 900.9375,-234.09375 C 905.00534,-234.61407 906.49763,-234.78948 907.21875,-235.03125 C 907.95585,-235.27839 909.01684,-235.61748 909.65625,-236.15625 C 911.70632,-235.82072 913.63003,-235.75829 915.15625,-235.9375 C 918.29856,-236.30646 920.33619,-236.49686 922.34375,-236.71875 C 923.95451,-236.89677 924.60842,-237.32695 925.375,-237.5625 C 925.61594,-237.64802 925.86912,-237.7181 926.15625,-237.75 C 927.30603,-237.87772 928.45754,-237.40335 932.53125,-237.875 C 936.60499,-238.34665 938.09034,-238.4856 938.8125,-238.71875 C 939.53196,-238.95102 940.51274,-239.19221 941.15625,-239.6875 C 943.09262,-239.35404 944.92631,-239.28326 946.375,-239.4375 C 949.52102,-239.77245 951.55256,-239.95609 953.5625,-240.15625 C 955.57246,-240.35639 956.04664,-240.98264 957.15625,-241.09375 C 958.30739,-241.20903 959.45268,-240.72869 963.53125,-241.15625 C 967.60986,-241.58381 969.12011,-241.71834 969.84375,-241.9375 C 970.5829,-242.16136 971.63947,-242.45075 972.28125,-242.96875 C 974.33835,-242.57008 976.28312,-242.47535 977.8125,-242.625 C 980.96123,-242.9331 982.98834,-243.09825 985,-243.28125 C 986.61407,-243.42807 987.2631,-243.8418 988.03125,-244.0625 C 988.27267,-244.14336 988.52478,-244.19241 988.8125,-244.21875 C 989.96461,-244.3242 991.10546,-243.826 995.1875,-244.21875 C 999.26958,-244.6115 1000.7764,-244.74959 1001.5,-244.96875 C 1002.2209,-245.18708 1003.1997,-245.41645 1003.8438,-245.90625 C 1005.7818,-245.55626 1007.6126,-245.45187 1009.0625,-245.59375 C 1012.2112,-245.90185 1014.2383,-246.067 1016.25,-246.25 C 1018.2616,-246.43299 1018.7642,-247.08802 1019.875,-247.1875 C 1021.0273,-247.29073 1022.1672,-246.80267 1026.25,-247.1875 C 1030.3329,-247.57232 1031.8387,-247.6885 1032.5625,-247.90625 C 1033.3018,-248.12868 1034.3581,-248.42074 1035,-248.9375 C 1037.0574,-248.53573 1039.0029,-248.43417 1040.5313,-248.59375 C 1043.6779,-248.92227 1045.7084,-249.11645 1047.7188,-249.3125 C 1049.3318,-249.46979 1049.9844,-249.94398 1050.75,-250.1875 C 1050.9907,-250.27554 1051.2132,-250.30887 1051.5,-250.34375 C 1052.6483,-250.48345 1053.8167,-250.00384 1057.875,-250.59375 C 1061.9333,-251.18367 1063.4368,-251.37089 1064.1563,-251.625 C 1064.873,-251.87816 1065.8308,-252.18307 1066.4688,-252.71875 C 1068.3885,-252.50681 1070.1887,-252.56734 1071.625,-252.8125 C 1074.7441,-253.3449 1076.7366,-253.74111 1078.7188,-254.125 C 1080.7009,-254.50887 1081.1931,-255.16465 1082.2813,-255.40625 C 1083.4101,-255.65691 1084.5516,-255.28996 1088.5313,-256.28125 C 1092.5109,-257.27253 1093.9609,-257.70055 1094.6563,-258.0625 C 1095.3786,-258.43851 1096.4182,-258.93308 1097.0313,-259.59375 C 1098.9943,-259.6058 1100.825,-259.8848 1102.25,-260.4375 C 1105.2012,-261.58211 1107.1232,-262.30692 1108.9375,-263.1875 C 1110.3932,-263.89403 1111.2723,-264.87391 1111.4844,-265.17188 C 1111.6966,-265.46984 1111.5962,-265.91718 1111.6223,-265.93863 C 1111.6652,-265.97387 1111.9416,-266.0236 1112.1013,-266.36707 C 1112.9602,-268.21415 1114.4223,-272.01166 1114.5365,-272.69652 C 1114.6502,-273.37868 1114.7003,-274.04426 1114.751,-274.44149 C 1114.7804,-274.67101 1114.6043,-275.30693 1114.6264,-275.36553 C 1114.6573,-275.44759 1114.9309,-275.63081 1114.9863,-275.88024 C 1115.2526,-277.07857 1115.0752,-278.07153 1114.8612,-279.48917 C 1114.6472,-280.90681 1113.8775,-284.11131 1113.2243,-284.96543 C 1112.5654,-285.82715 1112.0014,-285.9766 1111.4764,-285.96609 C 1111.2678,-285.69633 1111.6132,-285.703 1111.639,-285.65348 C 1112.3196,-285.60269 1112.573,-285.28484 1113.0582,-284.75686 C 1113.5434,-284.22888 1114.28,-280.90569 1114.4166,-279.4553 C 1114.5532,-278.00491 1114.6066,-276.5951 1114.3286,-275.98666 C 1114.0505,-275.37821 1113.6054,-275.46963 1113.313,-275.40375 C 1113.844,-275.21786 1113.9828,-275.27892 1114.0444,-274.43446 C 1114.1037,-273.62108 1113.9112,-272.79477 1113.5246,-271.62884 C 1113.1334,-270.44883 1111.6794,-267.27886 1111.2389,-267.03007 C 1110.7866,-266.77456 1110.5075,-266.75969 1110.1719,-266.89063 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7337);enable-background:new"
- sodipodi:nodetypes="cssscscsscsssccscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssscscssssssscscsscsssccscsscscssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsssssscssssscsszsszssszzcczzzczzzc" />
- <path
- id="path8183"
- d="M 988.75,-263.84375 C 990.66161,-263.20935 993.30027,-262.08534 994.875,-261.03125 C 996.44977,-259.97716 997.7711,-259.54873 1000.4063,-257.65625 C 1003.0145,-255.78311 1005.4332,-254.64103 1007.7188,-253.59375 C 1010.1881,-252.46228 1013.4709,-251.43901 1017.25,-249.65625 C 1016.0428,-250.91465 1010.111,-253.0207 1008.2188,-253.84375 C 1006.3266,-254.66679 1004.0908,-255.77424 1001.2813,-257.625 C 998.47169,-259.47575 997.65906,-260.10654 995.28125,-261.34375 C 992.90343,-262.58094 991.20137,-263.29295 988.75,-263.84375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7297);enable-background:new" />
- <path
- id="path8185"
- d="M 957.5,-260.78125 C 959.41,-260.16315 962.08288,-259.07191 963.65625,-258.03125 C 965.22964,-256.99059 966.55233,-256.54873 969.1875,-254.65625 C 971.79573,-252.7831 974.21442,-251.64104 976.5,-250.59375 C 978.96931,-249.46228 982.25213,-248.439 986.03125,-246.65625 C 984.82397,-247.91465 978.82971,-250.05195 976.9375,-250.875 C 975.04533,-251.69804 972.84084,-252.8055 970.03125,-254.65625 C 967.22167,-256.507 966.4383,-257.09557 964.0625,-258.3125 C 961.68672,-259.52941 959.94929,-260.25135 957.5,-260.78125 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7301);enable-background:new" />
- <path
- id="path8187"
- d="M 926.09375,-257.375 C 928.00147,-256.77755 930.64723,-255.71116 932.21875,-254.6875 C 933.79025,-253.66385 935.08897,-253.24779 937.71875,-251.40625 C 940.32166,-249.58352 942.74762,-248.43405 945.03125,-247.40625 C 947.49845,-246.29584 950.7866,-245.31302 954.5625,-243.5625 C 953.35627,-244.8106 947.3906,-246.88059 945.5,-247.6875 C 943.60942,-248.4944 941.39758,-249.57854 938.59375,-251.375 C 935.7899,-253.17144 934.96671,-253.77751 932.59375,-254.96875 C 930.22078,-256.15999 928.54013,-256.87158 926.09375,-257.375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7305);enable-background:new" />
- <path
- id="path8189"
- d="M 894.90625,-253.5625 C 896.80838,-253.00895 899.49326,-251.97363 901.0625,-250.96875 C 902.63173,-249.96388 903.93651,-249.56011 906.5625,-247.75 C 909.16162,-245.95836 911.56284,-244.87811 913.84375,-243.875 C 916.30803,-242.79126 919.60359,-241.83471 923.375,-240.125 C 922.1702,-241.36007 916.20084,-243.36978 914.3125,-244.15625 C 912.42418,-244.94272 910.2373,-245.98705 907.4375,-247.75 C 904.63773,-249.51294 903.83831,-250.11836 901.46875,-251.28125 C 899.09918,-252.44413 897.3455,-253.11537 894.90625,-253.5625 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7309);enable-background:new" />
- <path
- id="path8191"
- d="M 863.71875,-248.65625 C 865.59937,-248.22716 868.22302,-247.27587 869.78125,-246.34375 C 871.33948,-245.41164 872.63358,-245.08599 875.25,-243.34375 C 877.83971,-241.61931 880.23067,-240.63573 882.5,-239.71875 C 884.95176,-238.72806 888.23959,-237.84168 892,-236.21875 C 890.79869,-237.42609 884.84751,-239.28484 882.96875,-240 C 881.09,-240.71517 878.88335,-241.68442 876.09375,-243.375 C 873.30412,-245.06557 872.50914,-245.60322 870.15625,-246.65625 C 867.80333,-247.70926 866.13041,-248.36873 863.71875,-248.65625 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7313);enable-background:new" />
- <path
- id="path8193"
- d="M 833.15625,-241.375 C 835.00461,-241.07856 837.6257,-240.39868 839.15625,-239.59375 C 840.68683,-238.78882 841.96999,-238.53802 844.53125,-237.0625 C 847.06629,-235.60204 849.42193,-234.73741 851.65625,-234 C 854.07024,-233.20332 857.31336,-232.53311 861.03125,-231.15625 C 859.84354,-232.28498 853.94353,-233.746 852.09375,-234.3125 C 850.24398,-234.879 848.09033,-235.68642 845.34375,-237.15625 C 842.59718,-238.62608 841.84239,-239.07653 839.53125,-239.9375 C 837.2201,-240.79845 835.52654,-241.25759 833.15625,-241.375 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7317);enable-background:new" />
- <path
- id="path8195"
- d="M 802.90625,-232.3125 C 804.72845,-232.10123 807.27201,-231.51193 808.78125,-230.78125 C 810.2905,-230.05059 811.53693,-229.85127 814.0625,-228.5 C 816.56226,-227.16254 818.89404,-226.45157 821.09375,-225.84375 C 823.47028,-225.18708 826.65839,-224.77087 830.3125,-223.65625 C 829.14515,-224.70121 823.38362,-225.75954 821.5625,-226.21875 C 819.74139,-226.67796 817.61025,-227.34571 814.90625,-228.65625 C 812.20222,-229.96677 811.43519,-230.37615 809.15625,-231.125 C 806.8773,-231.87383 805.243,-232.30431 802.90625,-232.3125 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7321);enable-background:new" />
- <path
- id="path8197"
- d="M 773.1875,-222.1875 C 774.99859,-222.0088 777.50809,-221.52244 779,-220.84375 C 780.49194,-220.16506 781.7534,-220.04553 784.25,-218.78125 C 786.72107,-217.52987 789.04005,-216.88511 791.21875,-216.34375 C 793.57262,-215.75887 796.71009,-215.44623 800.3125,-214.5 C 799.16166,-215.49116 793.45999,-216.2833 791.65625,-216.6875 C 789.85253,-217.0917 787.74072,-217.70866 785.0625,-218.9375 C 782.38432,-220.16634 781.65905,-220.54839 779.40625,-221.21875 C 777.15346,-221.88909 775.50998,-222.22107 773.1875,-222.1875 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7329);enable-background:new" />
- <path
- id="path8199"
- d="M 743.5625,-211.1875 C 745.35531,-211.05839 747.83563,-210.63785 749.3125,-210 C 750.7894,-209.36215 752.0286,-209.25844 754.5,-208.0625 C 756.94618,-206.87878 759.22054,-206.31584 761.375,-205.84375 C 763.70267,-205.33372 766.7946,-205.16311 770.375,-204.28125 C 769.23121,-205.25185 763.62741,-205.8719 761.84375,-206.21875 C 760.06008,-206.56559 757.9609,-207.10631 755.3125,-208.25 C 752.66409,-209.39368 751.91755,-209.76631 749.6875,-210.375 C 747.45742,-210.98368 745.86156,-211.28466 743.5625,-211.1875 z"
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;filter:url(#filter7325);enable-background:new" />
- </g>
- </g>
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 863.87812,475.6679 C 865.52024,472.4499 867.39593,469.93261 868.73948,465.81892 C 869.5382,462.16103 872.05152,463.78819 875.99995,457.42202 C 877.40188,455.18252 881.47648,457.81338 884.96505,455.02291 C 886.23577,454.21972 887.84993,454.6186 889.44761,454.95978 C 893.213,456.27874 895.27337,458.66333 897.78137,460.76815 C 903.92043,466.73838 918.31551,468.71142 921.26741,467.08161 C 922.70146,464.17687 929.14869,461.67273 933.64178,455.96993 C 934.38989,454.84726 945.37114,447.22547 948.28899,449.40394"
- id="path8201"
- sodipodi:nodetypes="ccccccccc" />
- <path
- style="opacity:1;fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 888.50059,465.25071 C 895.864,462.01774 902.31149,456.34231 909.20872,451.86619 C 912.51929,449.89665 916.07855,455.0822 920.00472,455.46485 C 922.30245,455.24672 923.71762,456.66744 925.68683,457.10635 C 930.84319,458.42414 928.08476,460.97123 935.66209,463.54607 C 941.8177,465.26647 944.56949,456.7476 950.56184,456.22247 C 955.43923,455.71948 958.66076,455.90644 962.17859,455.96993 C 966.10555,456.10882 966.25714,452.47233 968.23951,450.66663 C 971.22007,447.86141 975.39512,448.81691 978.38436,445.92573 C 979.4019,444.54105 980.33894,442.91488 981.11895,440.81764 C 982.00096,438.8173 984.15901,441.12362 985.91718,442.08033"
- id="path8203"
- sodipodi:nodetypes="ccccccccccc" />
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer15"
- inkscape:label="Feet"
- style="display:inline">
- <path
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9048);enable-background:accumulate"
- d="M 403.27922,1056.3058 L 459.84776,1013.8794 L 531.97265,1028.0215 L 485.30361,1080.3474 L 431.56349,1087.4185 L 403.27922,1056.3058 z"
- id="path8994" />
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 542.27183,1060.5719 C 540.86456,1079.3731 541.12693,1093.3229 544.35357,1109.8752 C 547.58023,1126.4275 560.75966,1155.7825 564.68798,1173.0589 C 568.61419,1190.326 567.38211,1211.3686 552.22854,1224.2072 C 536.91093,1237.1846 510.17726,1245.8061 484.39623,1239.9409 C 458.61518,1234.0757 414.84716,1190.7175 395.80604,1169.7126 C 376.6939,1148.6293 332.04518,1075.862 317.86751,1045.4368 C 303.68984,1015.0117 305.2079,1008.7182 309.74779,999.90708 C 300.38107,975.38658 297.33408,949.84027 276.03534,924.33044 C 306.36081,927.44488 319.91562,951.28677 336.16102,971.47019 C 330.63113,923.39416 318.10631,907.05369 307.78707,880.74589 C 337.78137,886.82754 358.36643,912.61828 371.76686,953.45839 C 381.32101,949.54048 390.00462,944.08545 401.95427,944.39719 C 390.65677,902.70139 384.00481,874.48135 365.26702,843.32725 C 418.70898,848.99758 448.92404,923.96657 444.23844,931.28805 C 454.21641,929.04406 463.24409,924.75767 474.67497,925.63638 C 463.426,887.28936 453.62716,848.76848 471.01526,806.98819 C 471.01526,806.98819 519.30204,872.42507 525.40492,892.79397 C 531.50779,913.16287 526.92373,931.49448 526.92373,931.49448 C 526.92373,931.49448 543.8833,962.57978 547.21765,982.58862 C 550.59075,1002.83 543.68496,1041.6919 542.27183,1060.5719 z"
- id="path4189"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
- d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
- id="path4191"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- clip-path="url(#clipPath3631)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <path
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
- d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.12313,994.71481 758.22835,1018.3614 C 751.62344,1031.4918 739.70002,1075.8473 727.105,1094.6079 C 714.50998,1113.3684 698.57363,1134.3752 689.93296,1139.0288 C 668.44244,1150.603 645.37702,1164.5347 629.31407,1157.1183 C 614.93921,1150.4813 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
- id="path4193"
- clip-path="url(#clipPath3677)"
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
- <g
- id="g3617"
- clip-path="url(#clipPath3622)"
- transform="translate(276,136)">
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-52.200498,74.09707)"
- id="path4195"
- d="M -15.66751,843.48852 L -65.16499,827.93217 L -92.03504,880.25807 L -51.02285,925.51291 L -1.52538,887.32914 L -15.66751,843.48852 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
- <path
- sodipodi:nodetypes="ccccccccccccc"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,-46.92842,75.511284)"
- id="path4197"
- d="M 118.70648,859.93048 L 63.552152,813.26144 L 19.711532,850.03099 L 53.652662,903.7711 L 40.055848,989.23313 L 0.61048221,1017.5253 L -40.401718,1028.839 L -43.230138,1075.508 L 13.338402,1100.9639 L 32.282389,1031.3139 L 55.738939,972.45727 L 102.08648,899.84236 L 118.70648,859.93048 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
- </g>
- <path
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
- d="M -70.82184,932.58397 L -10.01066,905.71392 L 90.3985,936.82662 L 26.75889,967.93931 L -55.26549,950.96875 L -70.82184,932.58397 z"
- id="path4199"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,229.07158,211.51128)" />
- <path
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4105);enable-background:new"
- d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 800.79359,848.79859 799.18454,870.87536 C 790.40075,873.21707 802.03289,873.1989 802.65329,874.93786 C 810.5764,885.50366 807.31628,899.34258 806.28494,911.2912 C 799.22089,956.32475 784.14263,998.65314 770.33139,1041.971 C 758.25663,1074.9203 742.95719,1100.8235 722.44331,1129.1725 C 711.49074,1142.7239 699.19859,1157.0238 681.59956,1161.6725 C 661.44355,1167.9138 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 604.6766,1077.5203 604.14834,1062.5406 C 603.6101,1047.2777 601.85699,1031.9759 597.60573,1015.6743 C 593.35447,999.37268 588.56248,990.75636 581.48667,974.10092 C 574.24556,957.05636 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
- id="path4201"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- clip-path="url(#clipPath4177)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,822.28931,10.93589)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
- d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
- id="path4203"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
- d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
- id="path4205"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,995.28646,23.53493)" />
- <g
- id="g8317"
- style="filter:url(#filter8333)"
- clip-path="url(#clipPath8338)"
- transform="translate(276,136)">
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- clip-path="none"
- sodipodi:nodetypes="ccccc"
- id="path4209"
- d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="757.19519"
- x="-55"
- height="177"
- width="182"
- id="rect8315"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g8346"
- style="filter:url(#filter8354)"
- clip-path="url(#clipPath8359)"
- transform="translate(276,136)">
- <path
- transform="matrix(-0.9045327,0.2506626,0.2506626,0.9045327,719.28646,-112.46507)"
- clip-path="none"
- sodipodi:nodetypes="ccccccc"
- id="path4207"
- d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="696.19519"
- x="-22"
- height="176"
- width="165"
- id="rect8344"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
- <g
- inkscape:groupmode="layer"
- id="layer16"
- inkscape:label="Left Foot"
- style="display:inline">
- <path
- style="opacity:1;fill:#ada469;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1;display:inline;enable-background:new"
- d="M 1036.164,1071.8338 C 1042.9581,1090.7366 1046.6577,1105.1335 1048.0543,1123.0457 C 1049.4509,1140.958 1044.2716,1174.8465 1045.1538,1193.7018 C 1046.0356,1212.547 1053.2875,1233.8008 1072.4984,1242.6707 C 1091.9173,1251.6365 1121.8177,1252.882 1146.6183,1239.5251 C 1171.4189,1226.1681 1204.0193,1169.1996 1217.5925,1142.2164 C 1231.2164,1115.1325 1256.3536,1027.719 1262.2533,992.44781 C 1268.1531,957.1766 1264.8039,951.14704 1257.6359,943.39232 C 1260.2762,915.55217 1256.1361,888.45689 1270.7455,856.20614 C 1240.4965,868.03184 1233.3632,896.36684 1222.4266,921.71122 C 1214.4257,870.77829 1222.6358,850.43803 1225.7455,820.49186 C 1196.6808,835.26977 1182.884,867.60588 1180.7455,913.349 C 1169.8216,912.0448 1159.3541,908.91477 1147.1741,912.63471 C 1146.9101,866.61137 1145.7106,835.7453 1156.0847,798.42822 C 1102.8293,819.45508 1093.1375,905.02232 1100.0312,911.20614 C 1089.1484,911.74114 1078.6602,909.90884 1067.1741,914.06329 C 1067.813,871.49194 1066.9136,829.15468 1037.1741,791.20614 C 1037.1741,791.20614 1006.2161,872.12848 1005.7455,894.77757 C 1005.275,917.42666 1015.1971,934.94345 1015.1971,934.94345 C 1015.1971,934.94345 1006.6291,971.68396 1008.8985,993.17568 C 1011.1944,1014.9171 1029.3414,1052.8519 1036.164,1071.8338 z"
- id="path8848"
- sodipodi:nodetypes="czzzzzzcccccccccczczz" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter3587);enable-background:accumulate"
- d="M 719.5,738.69519 L 737.81177,754.12715 L 782.2228,738.73894 L 805.5,713.19519 L 816.96397,732.41584 L 847.63558,745.19938 L 872.73295,750.92775 L 892,723.19519 L 908.02309,747.02126 L 947,752.19519 L 957.24541,745.99667 L 964.00012,754.69487 L 989.5,765.69519 L 991.5,725.19519 L 955.94866,710.6576 L 923.45591,689.1305 L 883.0038,677.66492 L 861.69668,662.13148 L 840,685.19519 L 755.02878,638.61208 L 722,676.69519 L 719.5,738.69519 z"
- id="path3635"
- sodipodi:nodetypes="cccccccccccccccccccccc"
- clip-path="url(#clipPath3631)"
- transform="translate(276,136)" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter3898);enable-background:new"
- d="M 584,696.5 L 577.4375,713.65625 C 577.4375,713.65625 569.62598,734.02113 561.75,757.3125 C 557.81201,768.95818 553.86698,781.35395 550.8125,792.4375 C 547.75802,803.52105 545.47664,812.81736 545.3125,820.71875 C 544.91443,839.88071 551.05903,855.60705 554.25,862.46875 C 553.47847,866.02398 552.25863,871.92307 550.90625,880.5625 C 548.98583,892.83071 547.18798,907.71691 548.53125,920.4375 C 549.91334,933.52585 555.34347,948.62515 561.125,963.46875 C 566.90653,978.31235 573.17935,992.69586 576.34375,1001.5 C 582.97581,1019.9519 586.33671,1033.0763 587.65625,1050 C 588.2376,1057.4561 587.41398,1070.336 586.40625,1083.375 C 585.39852,1096.414 584.21964,1109.6764 584.71875,1120.3438 C 585.70786,1141.4836 594.04673,1167.1785 618.09375,1178.2812 C 640.86858,1188.7966 673.42057,1189.9834 701.53125,1174.8438 C 717.69117,1166.1404 731.60759,1147.7462 744.90625,1127.9375 C 758.20491,1108.1288 769.87542,1086.8841 776.84375,1073.0312 C 792.19667,1042.51 816.23728,957.56702 822.46875,920.3125 C 825.48734,902.26597 826.39041,891.24695 825.09375,882.28125 C 824.11522,875.51521 821.26556,870.13385 818.21875,866.0625 C 820.26149,838.55459 817.48668,814.69372 830.1875,786.65625 L 840.75,763.375 L 816.9375,772.6875 C 799.44775,779.52503 788.03586,791.73286 780.34375,804.75 C 780.02124,805.29577 779.78061,805.85776 779.46875,806.40625 C 779.69078,783.89104 783.87659,768.76866 786.0625,747.71875 L 788.03125,728.71875 L 771,737.375 C 740.40551,752.93071 725.30511,785.56821 721.28125,827.59375 C 717.03593,826.96828 712.44985,826.5741 707.46875,826.75 C 707.17726,787.56964 707.07246,759.71315 716.0625,727.375 L 721.65625,707.25 L 702.21875,714.90625 C 671.30938,727.11019 654.35921,756.83698 645.59375,783.28125 C 641.21102,796.50339 638.84793,809.08246 638,819.21875 C 637.76797,821.99248 637.68894,824.53007 637.6875,826.9375 C 634.44563,826.90109 631.26698,827.07339 627.625,827.4375 C 627.66662,788.43277 624.14076,747.68335 595.34375,710.9375 L 584,696.5 z M 589.8125,740.3125 C 606.61941,770.95633 607.28701,804.27978 606.75,840.0625 L 606.53125,855.125 L 618.56618,848.58579 C 627.22823,845.45277 638.12676,848.35827 650.5,847.75 L 665.17465,857.1066 L 658.84375,831.3125 C 658.7541,831.08253 658.62329,830.89581 658.59375,830.59375 C 658.39424,828.55389 658.37143,825.12068 658.71875,820.96875 C 659.41339,812.66489 661.50832,801.38351 665.34375,789.8125 C 670.49907,774.25956 678.83176,758.62002 690.46875,747.28125 C 685.78494,775.91923 687.25316,807.54059 687.45711,843.08639 L 684.69118,856.34803 L 700.1875,848.75 C 709.2169,845.99229 717.37647,848.40004 729.46875,849.84375 L 742.71507,859.28798 L 741.09375,840 C 742.54168,809.02823 749.31524,786.32192 761.8125,771.125 C 758.82562,790.90384 756.38207,812.9098 762.125,849.46875 L 763.19052,855.84193 L 760.25237,867.35878 L 770.86948,859.1906 L 780.05921,869.41258 L 778.51093,858.94898 L 781.9375,852 C 787.63852,838.78851 792.11032,825.78663 798.28125,815.34375 C 799.24111,813.71941 800.31278,812.27939 801.34375,810.78125 C 797.66309,831.9366 798.91659,850.9894 797.25,868.5625 L 792.56986,876.36948 L 799.96875,876.59375 C 803.1888,880.07736 803.83625,880.44443 804.53125,885.25 C 805.22625,890.05557 804.84987,899.65035 801.96875,916.875 C 796.40076,950.16292 770.17603,1040.0409 758.28125,1063.6875 C 751.67634,1076.8179 740.25127,1097.5832 727.65625,1116.3438 C 715.06123,1135.1043 700.29692,1151.8776 691.65625,1156.5312 C 670.16573,1168.1054 642.87545,1166.7914 626.8125,1159.375 C 612.43764,1152.738 606.27438,1135.9256 605.5,1119.375 C 605.11689,1111.187 606.11279,1098.0658 607.125,1084.9688 C 608.13721,1071.8717 618.41391,1062.398 622.54839,1048.4062 C 627.92068,1030.2254 621.10152,1011.8118 610.04839,994.46875 C 603.56184,984.29097 586.07159,970.21085 580.5,955.90625 C 574.92841,941.60165 570.13249,926.9031 569.21875,918.25 C 568.29254,909.47887 569.64125,895.22498 571.4375,883.75 C 573.23375,872.27503 575.28125,863.46875 575.28125,863.46875 L 584.70403,859.85355 L 574.21875,855.96875 C 574.21875,855.96875 565.71986,840.65865 566.125,821.15625 C 566.19611,817.73309 567.96126,808.4282 570.84375,797.96875 C 573.72624,787.5093 577.60841,775.41604 581.46875,764 C 584.51314,754.99692 587.24938,747.39655 589.8125,740.3125 z"
- id="path3669"
- clip-path="url(#clipPath3677)"
- sodipodi:nodetypes="ccssscsssssssssssssccccscccccccccsscccccccccccssscccccccccccccccsccccssssssssssssscccsssc" />
- <g
- id="g3628"
- clip-path="url(#clipPath3636)"
- transform="translate(276,136)">
- <path
- id="path8988"
- d="M 824.48651,818.48242 L 774.98903,802.92607 L 748.11898,855.25197 L 789.13117,900.50681 L 838.62864,862.32304 L 824.48651,818.48242 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9024);enable-background:accumulate" />
- <path
- id="path8990"
- d="M 964.49365,855.25197 L 909.33932,808.58293 L 865.4987,845.35248 L 899.43983,899.09259 L 906.51089,965.56063 L 855.59921,1000.916 L 814.58701,1012.2297 L 811.75859,1058.8987 L 868.32713,1084.3546 L 931.96674,1007.987 L 956.00837,913.23473 L 964.49365,855.25197 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9020);enable-background:accumulate" />
- </g>
- <path
- style="opacity:0.25;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter9044);enable-background:accumulate"
- d="M 1045.3322,1043.5779 L 1106.1434,1016.7078 L 1206.5525,1047.8205 L 1142.9129,1078.9332 L 1060.8885,1061.9626 L 1045.3322,1043.5779 z"
- id="path8992" />
- <path
- transform="translate(450.03125,73.843964)"
- style="opacity:0.58775509;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:20.79999924;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-opacity:1;display:inline;filter:url(#filter4185);enable-background:new"
- d="M 583.0625,715.75 C 570.95641,750.19974 556.348,784.28333 551.3125,820.59375 C 550.48042,835.52242 555.90165,849.75318 560.15625,863.65625 C 554.24001,890.85751 550.01944,920.5562 561.3125,946.78125 C 574.82967,984.9421 596.31397,1022.4634 593.73529,1064.2495 C 592.78699,1093.5437 584.72085,1125.2436 599.125,1152.5312 C 609.32364,1171.866 632.26456,1179.8429 653.09285,1180.1988 C 680.95504,1181.3729 709.55546,1168.5772 725.09375,1144.9375 C 747.68924,1115.5658 766.89426,1083.4402 780.3324,1048.8777 C 797.22293,1003.3717 810.0042,956.31698 818.26642,908.4788 C 820.09082,895.53774 821.3675,881.00895 813.6875,869.65625 C 810.25635,862.31993 813.72957,854.09611 813.00293,846.34648 C 813.67693,821.35182 817.01525,795.68272 829.65625,773.75 C 811.92312,780.1946 794.58357,790.30971 785.65318,807.61425 C 781.7181,814.3238 778.04836,821.18838 774.28125,828 C 770.73126,797.98592 778.00088,768.35172 781.0625,738.71875 C 760.89646,747.77338 744.18578,764.37397 736.88755,785.40075 C 730.58292,800.98078 728.08533,817.71793 726.625,834.4375 C 718.37166,832.91825 709.94053,832.33595 701.5625,832.9375 C 700.59942,794.23963 701.09554,753.53035 712.53125,717.03125 C 693.85012,723.24901 677.36504,735.76676 666.90322,752.41848 C 653.05068,773.29827 645.64182,798.17243 643.84375,823.03125 C 644.42909,827.35579 643.78249,834.87134 637.5,832.90625 C 632.16882,832.9238 626.87092,833.58508 621.5625,834 C 622.71034,794.61852 618.22106,752.3718 594.5,719.78125 C 591.43929,716.14408 588.86315,712.09687 585.875,708.4375 C 584.9375,710.875 584,713.3125 583.0625,715.75 z M 590.8125,729.59375 C 609.37777,758.89004 613.295,794.41387 612.9375,828.46875 C 613.14159,833.64401 612.42094,840.29795 613.0625,844.53125 C 625.38106,838.4285 639.80162,842.09135 652.84375,842.34375 C 655.16087,843.567 656.03585,843.99618 654.75,840.9375 C 650.58545,826.98465 652.90172,812.3245 656.55504,798.52986 C 662.92191,772.23922 677.18332,747.44188 699.375,731.5 C 690.75791,768.73706 693.65842,808.06161 693.28125,845.46875 C 705.53469,838.55885 720.56004,842.02262 733.3125,845.21875 C 736.70472,848.75355 735.60185,844.48927 735.5,841.40625 C 735.01691,820.03567 739.63133,798.33662 749.1875,779.25 C 755.15016,768.56273 763.43088,759.44621 771.625,750.375 C 763.75344,784.2131 762.4221,819.71093 768.90625,853.875 C 770.6311,852.46382 773.51306,853.42086 774.5625,853.5 C 784.24619,832.26318 790.91362,808.11938 809.45266,792.75815 C 811.32595,792.38693 808.00448,801.2831 807.96875,804.65625 C 804.43387,826.50206 804.67155,848.82948 803.0625,870.90625 C 801.75012,872.28304 805.91085,873.22979 806.53125,874.96875 C 814.45436,885.53455 809.65419,899.80024 808.62285,911.74886 C 801.5588,956.78241 786.85732,1000.1282 773.04608,1043.446 C 760.97132,1076.3953 742.32638,1106.526 721.8125,1134.875 C 710.85993,1148.4264 698.56778,1162.7263 680.96875,1167.375 C 660.81274,1173.6163 637.3928,1172.5494 619,1161.7188 C 601.71034,1149.3774 597.97607,1126.0099 599.73774,1106.0324 C 599.78653,1090.2062 602.10985,1078.2316 607.65521,1063.2271 C 613.20056,1048.2226 610.12626,1031.8954 605.875,1015.5938 C 601.62374,999.2922 593.69597,989.33378 584.05342,973.38963 C 574.41087,957.44548 566.41652,937.35229 563.28125,917.8125 C 561.53177,899.18536 566.17296,880.68988 569.0625,862.5625 C 572.35873,859.72554 567.46451,857.36591 566.75,854.375 C 559.14887,837.35992 558.34253,817.6001 564.00766,799.81502 C 571.13786,774.74272 579.76853,750.18261 588.6875,725.6875 C 589.39583,726.98958 590.10417,728.29167 590.8125,729.59375 z"
- id="path4149"
- sodipodi:nodetypes="ccccccccccccccccccccccccccccccccccccccccccccccccccczzzcccccc"
- clip-path="url(#clipPath4177)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4130);enable-background:accumulate"
- d="M 735.05635,733.03834 L 737.81177,754.12715 L 782.2228,738.73894 L 787.07343,716.34919 L 783.13726,694.29697 L 760.68563,657.70396 L 752.40559,688.0089 L 735.05635,733.03834 z"
- id="path3902"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="translate(276,136)" />
- <path
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;filter:url(#filter4141);enable-background:accumulate"
- d="M 831.81321,730.29452 L 847.63558,745.19938 L 868.49031,748.09932 L 866.90002,708.17334 L 875.22563,677.66492 L 868.06064,671.32386 L 846.36395,692.26626 L 831.81321,730.29452 z"
- id="path4135"
- sodipodi:nodetypes="cccccccc"
- clip-path="url(#clipPath3631)"
- transform="translate(276,136)" />
- <g
- id="g8367"
- style="filter:url(#filter8379)"
- clip-path="url(#clipPath8392)"
- transform="translate(276,136)">
- <path
- clip-path="none"
- sodipodi:nodetypes="ccccccc"
- id="path4145"
- d="M 910.14441,746.31415 L 942.75736,751.48808 L 942.39617,727.61189 L 949.5847,697.92968 L 941.13358,692.66603 L 919.31164,719.1768 L 910.14441,746.31415 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="650.19098"
- x="877.51953"
- height="172.53406"
- width="123.03658"
- id="rect8365"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- <g
- id="g8400"
- style="filter:url(#filter8404)"
- clip-path="url(#clipPath8417)"
- transform="translate(276,136)">
- <path
- clip-path="none"
- sodipodi:nodetypes="ccccc"
- id="path4147"
- d="M 964.00012,754.69487 L 982.42893,762.15966 L 991.5,725.19519 L 976.62969,730.03405 L 964.00012,754.69487 z"
- style="opacity:1;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:1px;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- <rect
- y="677.06104"
- x="924.89569"
- height="125.1579"
- width="142.12846"
- id="rect8398"
- style="opacity:1;fill:none;fill-opacity:1;fill-rule:nonzero;stroke:none;stroke-width:25;stroke-linecap:butt;stroke-linejoin:miter;marker:none;marker-start:none;marker-mid:none;marker-end:none;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;visibility:visible;display:inline;overflow:visible;enable-background:accumulate" />
- </g>
- </g>
-</svg>
-Tux is taking a three month sabbatical to work as a barber, so Tuz is
-standing in. He's taken pains to ensure you'll hardly notice.
+This is the full-colour version of the currently unofficial Linux logo
+("currently unofficial" just means that there has been no paperwork and
+that I have not really announced it yet). It was created by Larry Ewing,
+and is freely usable as long as you acknowledge Larry as the original
+artist.
+
+Note that there are black-and-white versions of this available that
+scale down to smaller sizes and are better for letterheads or whatever
+you want to use it for: for the full range of logos take a look at
+Larry's web-page:
+
+ http://www.isc.tamu.edu/~lewing/linux/
-Image by Andrew McGown and Josh Bush. Image is licensed CC BY-SA.
2) Representing devices without a current OF specification
a) PHY nodes
b) Interrupt controllers
- c) CFI or JEDEC memory-mapped NOR flash
- d) 4xx/Axon EMAC ethernet nodes
- e) Xilinx IP cores
- f) USB EHCI controllers
- g) MDIO on GPIOs
- h) SPI busses
+ c) 4xx/Axon EMAC ethernet nodes
+ d) Xilinx IP cores
+ e) USB EHCI controllers
+ f) MDIO on GPIOs
+ g) SPI busses
VII - Marvell Discovery mv64[345]6x System Controller chips
1) The /system-controller node
translation of SOC addresses for memory mapped SOC registers.
- bus-frequency: Contains the bus frequency for the SOC node.
Typically, the value of this field is filled in by the boot
- loader.
+ loader.
Recommended properties:
device_type = "open-pic";
};
- c) CFI or JEDEC memory-mapped NOR flash
-
- Flash chips (Memory Technology Devices) are often used for solid state
- file systems on embedded devices.
-
- - compatible : should contain the specific model of flash chip(s)
- used, if known, followed by either "cfi-flash" or "jedec-flash"
- - reg : Address range of the flash chip
- - bank-width : Width (in bytes) of the flash bank. Equal to the
- device width times the number of interleaved chips.
- - device-width : (optional) Width of a single flash chip. If
- omitted, assumed to be equal to 'bank-width'.
- - #address-cells, #size-cells : Must be present if the flash has
- sub-nodes representing partitions (see below). In this case
- both #address-cells and #size-cells must be equal to 1.
-
- For JEDEC compatible devices, the following additional properties
- are defined:
-
- - vendor-id : Contains the flash chip's vendor id (1 byte).
- - device-id : Contains the flash chip's device id (1 byte).
-
- In addition to the information on the flash bank itself, the
- device tree may optionally contain additional information
- describing partitions of the flash address space. This can be
- used on platforms which have strong conventions about which
- portions of the flash are used for what purposes, but which don't
- use an on-flash partition table such as RedBoot.
-
- Each partition is represented as a sub-node of the flash device.
- Each node's name represents the name of the corresponding
- partition of the flash device.
-
- Flash partitions
- - reg : The partition's offset and size within the flash bank.
- - label : (optional) The label / name for this flash partition.
- If omitted, the label is taken from the node name (excluding
- the unit address).
- - read-only : (optional) This parameter, if present, is a hint to
- Linux that this flash partition should only be mounted
- read-only. This is usually used for flash partitions
- containing early-boot firmware images or data which should not
- be clobbered.
-
- Example:
-
- flash@ff000000 {
- compatible = "amd,am29lv128ml", "cfi-flash";
- reg = <ff000000 01000000>;
- bank-width = <4>;
- device-width = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- fs@0 {
- label = "fs";
- reg = <0 f80000>;
- };
- firmware@f80000 {
- label ="firmware";
- reg = <f80000 80000>;
- read-only;
- };
- };
-
- d) 4xx/Axon EMAC ethernet nodes
+ c) 4xx/Axon EMAC ethernet nodes
The EMAC ethernet controller in IBM and AMCC 4xx chips, and also
the Axon bridge. To operate this needs to interact with a ths
available.
For Axon: 0x0000012a
- e) Xilinx IP cores
+ d) Xilinx IP cores
The Xilinx EDK toolchain ships with a set of IP cores (devices) for use
in Xilinx Spartan and Virtex FPGAs. The devices cover the whole range
listed above, nodes for these devices should include a phy-handle
property, and may include other common network device properties
like local-mac-address.
-
+
iv) Xilinx Uartlite
Xilinx uartlite devices are simple fixed speed serial ports.
- reg-offset : A value of 3 is required
- reg-shift : A value of 2 is required
- f) USB EHCI controllers
+ e) USB EHCI controllers
Required properties:
- compatible : should be "usb-ehci".
big-endian;
};
- g) MDIO on GPIOs
+ f) MDIO on GPIOs
Currently defined compatibles:
- virtual,gpio-mdio
&qe_pio_c 6>;
};
- h) SPI (Serial Peripheral Interface) busses
+ g) SPI (Serial Peripheral Interface) busses
SPI busses can be described with a node for the SPI master device
and a set of child nodes for each SPI slave on the bus. For this
Recommended properties :
- - compatible : Should be "fsl-i2c" for parts compatible with
- Freescale I2C specifications.
+ - compatible : compatibility list with 2 entries, the first should
+ be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
+ e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
+ should be "fsl-i2c".
- interrupts : <a b> where a is the interrupt number and b is a
field that represents an encoding of the sense and level
information for the interrupt. This should be encoded based on
controller you have.
- interrupt-parent : the phandle for the interrupt controller that
services interrupts for this device.
- - dfsrr : boolean; if defined, indicates that this I2C device has
- a digital filter sampling rate register
- - fsl5200-clocking : boolean; if defined, indicated that this device
- uses the FSL 5200 clocking mechanism.
-
-Example :
- i2c@3000 {
- interrupt-parent = <40000>;
- interrupts = <1b 3>;
- reg = <3000 18>;
- device_type = "i2c";
- compatible = "fsl-i2c";
- dfsrr;
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+ from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+
+Examples :
+
+ i2c@3d00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+ cell-index = <0>;
+ reg = <0x3d00 0x40>;
+ interrupts = <2 15 0>;
+ interrupt-parent = <&mpc5200_pic>;
+ fsl,preserve-clocking;
};
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ clock-frequency = <400000>;
+ };
+
--- /dev/null
+CFI or JEDEC memory-mapped NOR flash
+
+Flash chips (Memory Technology Devices) are often used for solid state
+file systems on embedded devices.
+
+ - compatible : should contain the specific model of flash chip(s)
+ used, if known, followed by either "cfi-flash" or "jedec-flash"
+ - reg : Address range(s) of the flash chip(s)
+ It's possible to (optionally) define multiple "reg" tuples so that
+ non-identical NOR chips can be described in one flash node.
+ - bank-width : Width (in bytes) of the flash bank. Equal to the
+ device width times the number of interleaved chips.
+ - device-width : (optional) Width of a single flash chip. If
+ omitted, assumed to be equal to 'bank-width'.
+ - #address-cells, #size-cells : Must be present if the flash has
+ sub-nodes representing partitions (see below). In this case
+ both #address-cells and #size-cells must be equal to 1.
+
+For JEDEC compatible devices, the following additional properties
+are defined:
+
+ - vendor-id : Contains the flash chip's vendor id (1 byte).
+ - device-id : Contains the flash chip's device id (1 byte).
+
+In addition to the information on the flash bank itself, the
+device tree may optionally contain additional information
+describing partitions of the flash address space. This can be
+used on platforms which have strong conventions about which
+portions of the flash are used for what purposes, but which don't
+use an on-flash partition table such as RedBoot.
+
+Each partition is represented as a sub-node of the flash device.
+Each node's name represents the name of the corresponding
+partition of the flash device.
+
+Flash partitions
+ - reg : The partition's offset and size within the flash bank.
+ - label : (optional) The label / name for this flash partition.
+ If omitted, the label is taken from the node name (excluding
+ the unit address).
+ - read-only : (optional) This parameter, if present, is a hint to
+ Linux that this flash partition should only be mounted
+ read-only. This is usually used for flash partitions
+ containing early-boot firmware images or data which should not
+ be clobbered.
+
+Example:
+
+ flash@ff000000 {
+ compatible = "amd,am29lv128ml", "cfi-flash";
+ reg = <ff000000 01000000>;
+ bank-width = <4>;
+ device-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ fs@0 {
+ label = "fs";
+ reg = <0 f80000>;
+ };
+ firmware@f80000 {
+ label ="firmware";
+ reg = <f80000 80000>;
+ read-only;
+ };
+ };
+
+Here an example with multiple "reg" tuples:
+
+ flash@f0000000,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "intel,PC48F4400P0VB", "cfi-flash";
+ reg = <0 0x00000000 0x02000000
+ 0 0x02000000 0x02000000>;
+ bank-width = <2>;
+ partition@0 {
+ label = "test-part1";
+ reg = <0 0x04000000>;
+ };
+ };
What `model` option values are available depends on the codec chip.
Check your codec chip from the codec proc file (see "Codec Proc-File"
section below). It will show the vendor/product name of your codec
-chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file,
+chip. Then, see Documentation/sound/alsa/HD-Audio-Models.txt file,
the section of HD-audio driver. You can find a list of codecs
and `model` options belonging to each codec. For example, for Realtek
ALC262 codec chip, pass `model=ultra` for devices that are compatible
Thus, the first thing you can do for any brand-new, unsupported and
non-working HD-audio hardware is to check HD-audio codec and several
-different `model` option values. If you have a luck, some of them
+different `model` option values. If you have any luck, some of them
might suit with your device well.
Some codecs such as ALC880 have a special model option `model=test`.
This sets up the device clock rate, SPI mode, and word sizes.
Drivers may change the defaults provided by board_info, and then
call spi_setup(spi) to invoke this routine. It may sleep.
+
Unless each SPI slave has its own configuration registers, don't
change them right away ... otherwise drivers could corrupt I/O
that's in progress for other SPI devices.
+ ** BUG ALERT: for some reason the first version of
+ ** many spi_master drivers seems to get this wrong.
+ ** When you code setup(), ASSUME that the controller
+ ** is actively processing transfers for another device.
+
master->transfer(struct spi_device *spi, struct spi_message *message)
This must not sleep. Its responsibility is arrange that the
transfer happens and its complete() callback is issued. The two
There is only one file in this directory.
unix_dgram_qlen limits the max number of datagrams queued in Unix domain
-socket's buffer. It will not take effect unless PF_UNIX flag is spicified.
+socket's buffer. It will not take effect unless PF_UNIX flag is specified.
3. /proc/sys/net/ipv4 - IPV4 settings
- nr_hugepages
- nr_overcommit_hugepages
- nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
- nr_trim_pages (only if CONFIG_MMU=n)
- numa_zonelist_order
- oom_dump_tasks
If dirty_bytes is written, dirty_ratio becomes a function of its value
(dirty_bytes / the amount of dirtyable system memory).
+Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
+value lower than this limit will be ignored and the old configuration will be
+retained.
+
==============================================================
dirty_expire_centisecs
==============================================================
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2. The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created. The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8. The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
overcommit_memory:
This value contains a flag that enables memory overcommitment.
"devices" directory at /sys/subsystem/<name>/devices.
If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
- ignored. If it does not exist, you have always to scan all three
+ ignored. If it does not exist, you always have to scan all three
places, as the kernel is free to move a subsystem from one place to
the other, as long as the devices are still reachable by the same
subsystem name.
--- /dev/null
+--- What is TOMOYO? ---
+
+TOMOYO is a name-based MAC extension (LSM module) for the Linux kernel.
+
+LiveCD-based tutorials are available at
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/ubuntu8.04-live/
+http://tomoyo.sourceforge.jp/en/1.6.x/1st-step/centos5-live/ .
+Though these tutorials use non-LSM version of TOMOYO, they are useful for you
+to know what TOMOYO is.
+
+--- How to enable TOMOYO? ---
+
+Build the kernel with CONFIG_SECURITY_TOMOYO=y and pass "security=tomoyo" on
+kernel's command line.
+
+Please see http://tomoyo.sourceforge.jp/en/2.2.x/ for details.
+
+--- Where is documentation? ---
+
+User <-> Kernel interface documentation is available at
+http://tomoyo.sourceforge.jp/en/2.2.x/policy-reference.html .
+
+Materials we prepared for seminars and symposiums are available at
+http://sourceforge.jp/projects/tomoyo/docs/?category_id=532&language_id=1 .
+Below lists are chosen from three aspects.
+
+What is TOMOYO?
+ TOMOYO Linux Overview
+ http://sourceforge.jp/projects/tomoyo/docs/lca2009-takeda.pdf
+ TOMOYO Linux: pragmatic and manageable security for Linux
+ http://sourceforge.jp/projects/tomoyo/docs/freedomhectaipei-tomoyo.pdf
+ TOMOYO Linux: A Practical Method to Understand and Protect Your Own Linux Box
+ http://sourceforge.jp/projects/tomoyo/docs/PacSec2007-en-no-demo.pdf
+
+What can TOMOYO do?
+ Deep inside TOMOYO Linux
+ http://sourceforge.jp/projects/tomoyo/docs/lca2009-kumaneko.pdf
+ The role of "pathname based access control" in security.
+ http://sourceforge.jp/projects/tomoyo/docs/lfj2008-bof.pdf
+
+History of TOMOYO?
+ Realities of Mainlining
+ http://sourceforge.jp/projects/tomoyo/docs/lfj2008.pdf
+
+--- What is future plan? ---
+
+We believe that inode based security and name based security are complementary
+and both should be used together. But unfortunately, so far, we cannot enable
+multiple LSM modules at the same time. We feel sorry that you have to give up
+SELinux/SMACK/AppArmor etc. when you want to use TOMOYO.
+
+We hope that LSM becomes stackable in future. Meanwhile, you can use non-LSM
+version of TOMOYO, available at http://tomoyo.sourceforge.jp/en/1.6.x/ .
+LSM version of TOMOYO is a subset of non-LSM version of TOMOYO. We are planning
+to port non-LSM version's functionalities to LSM versions.
00-INDEX
- this file.
+active_mm.txt
+ - An explanation from Linus about tsk->active_mm vs tsk->mm.
balance
- various information on memory balancing.
hugetlbpage.txt
--- /dev/null
+List: linux-kernel
+Subject: Re: active_mm
+From: Linus Torvalds <torvalds () transmeta ! com>
+Date: 1999-07-30 21:36:24
+
+Cc'd to linux-kernel, because I don't write explanations all that often,
+and when I do I feel better about more people reading them.
+
+On Fri, 30 Jul 1999, David Mosberger wrote:
+>
+> Is there a brief description someplace on how "mm" vs. "active_mm" in
+> the task_struct are supposed to be used? (My apologies if this was
+> discussed on the mailing lists---I just returned from vacation and
+> wasn't able to follow linux-kernel for a while).
+
+Basically, the new setup is:
+
+ - we have "real address spaces" and "anonymous address spaces". The
+ difference is that an anonymous address space doesn't care about the
+ user-level page tables at all, so when we do a context switch into an
+ anonymous address space we just leave the previous address space
+ active.
+
+ The obvious use for a "anonymous address space" is any thread that
+ doesn't need any user mappings - all kernel threads basically fall into
+ this category, but even "real" threads can temporarily say that for
+ some amount of time they are not going to be interested in user space,
+ and that the scheduler might as well try to avoid wasting time on
+ switching the VM state around. Currently only the old-style bdflush
+ sync does that.
+
+ - "tsk->mm" points to the "real address space". For an anonymous process,
+ tsk->mm will be NULL, for the logical reason that an anonymous process
+ really doesn't _have_ a real address space at all.
+
+ - however, we obviously need to keep track of which address space we
+ "stole" for such an anonymous user. For that, we have "tsk->active_mm",
+ which shows what the currently active address space is.
+
+ The rule is that for a process with a real address space (ie tsk->mm is
+ non-NULL) the active_mm obviously always has to be the same as the real
+ one.
+
+ For a anonymous process, tsk->mm == NULL, and tsk->active_mm is the
+ "borrowed" mm while the anonymous process is running. When the
+ anonymous process gets scheduled away, the borrowed address space is
+ returned and cleared.
+
+To support all that, the "struct mm_struct" now has two counters: a
+"mm_users" counter that is how many "real address space users" there are,
+and a "mm_count" counter that is the number of "lazy" users (ie anonymous
+users) plus one if there are any real users.
+
+Usually there is at least one real user, but it could be that the real
+user exited on another CPU while a lazy user was still active, so you do
+actually get cases where you have a address space that is _only_ used by
+lazy users. That is often a short-lived state, because once that thread
+gets scheduled away in favour of a real thread, the "zombie" mm gets
+released because "mm_users" becomes zero.
+
+Also, a new rule is that _nobody_ ever has "init_mm" as a real MM any
+more. "init_mm" should be considered just a "lazy context when no other
+context is available", and in fact it is mainly used just at bootup when
+no real VM has yet been created. So code that used to check
+
+ if (current->mm == &init_mm)
+
+should generally just do
+
+ if (!current->mm)
+
+instead (which makes more sense anyway - the test is basically one of "do
+we have a user context", and is generally done by the page fault handler
+and things like that).
+
+Anyway, I put a pre-patch-2.3.13-1 on ftp.kernel.org just a moment ago,
+because it slightly changes the interfaces to accomodate the alpha (who
+would have thought it, but the alpha actually ends up having one of the
+ugliest context switch codes - unlike the other architectures where the MM
+and register state is separate, the alpha PALcode joins the two, and you
+need to switch both together).
+
+(From http://marc.info/?l=linux-kernel&m=93337278602211&w=2)
-
-This document describes the Linux memory management "Unevictable LRU"
-infrastructure and the use of this infrastructure to manage several types
-of "unevictable" pages. The document attempts to provide the overall
-rationale behind this mechanism and the rationale for some of the design
-decisions that drove the implementation. The latter design rationale is
-discussed in the context of an implementation description. Admittedly, one
-can obtain the implementation details--the "what does it do?"--by reading the
-code. One hopes that the descriptions below add value by provide the answer
-to "why does it do that?".
-
-Unevictable LRU Infrastructure:
-
-The Unevictable LRU adds an additional LRU list to track unevictable pages
-and to hide these pages from vmscan. This mechanism is based on a patch by
-Larry Woodman of Red Hat to address several scalability problems with page
+ ==============================
+ UNEVICTABLE LRU INFRASTRUCTURE
+ ==============================
+
+========
+CONTENTS
+========
+
+ (*) The Unevictable LRU
+
+ - The unevictable page list.
+ - Memory control group interaction.
+ - Marking address spaces unevictable.
+ - Detecting Unevictable Pages.
+ - vmscan's handling of unevictable pages.
+
+ (*) mlock()'d pages.
+
+ - History.
+ - Basic management.
+ - mlock()/mlockall() system call handling.
+ - Filtering special vmas.
+ - munlock()/munlockall() system call handling.
+ - Migrating mlocked pages.
+ - mmap(MAP_LOCKED) system call handling.
+ - munmap()/exit()/exec() system call handling.
+ - try_to_unmap().
+ - try_to_munlock() reverse map scan.
+ - Page reclaim in shrink_*_list().
+
+
+============
+INTRODUCTION
+============
+
+This document describes the Linux memory manager's "Unevictable LRU"
+infrastructure and the use of this to manage several types of "unevictable"
+pages.
+
+The document attempts to provide the overall rationale behind this mechanism
+and the rationale for some of the design decisions that drove the
+implementation. The latter design rationale is discussed in the context of an
+implementation description. Admittedly, one can obtain the implementation
+details - the "what does it do?" - by reading the code. One hopes that the
+descriptions below add value by provide the answer to "why does it do that?".
+
+
+===================
+THE UNEVICTABLE LRU
+===================
+
+The Unevictable LRU facility adds an additional LRU list to track unevictable
+pages and to hide these pages from vmscan. This mechanism is based on a patch
+by Larry Woodman of Red Hat to address several scalability problems with page
reclaim in Linux. The problems have been observed at customer sites on large
-memory x86_64 systems. For example, a non-numal x86_64 platform with 128GB
-of main memory will have over 32 million 4k pages in a single zone. When a
-large fraction of these pages are not evictable for any reason [see below],
-vmscan will spend a lot of time scanning the LRU lists looking for the small
-fraction of pages that are evictable. This can result in a situation where
-all cpus are spending 100% of their time in vmscan for hours or days on end,
-with the system completely unresponsive.
-
-The Unevictable LRU infrastructure addresses the following classes of
-unevictable pages:
-
-+ page owned by ramfs
-+ page mapped into SHM_LOCKed shared memory regions
-+ page mapped into VM_LOCKED [mlock()ed] vmas
-
-The infrastructure might be able to handle other conditions that make pages
+memory x86_64 systems.
+
+To illustrate this with an example, a non-NUMA x86_64 platform with 128GB of
+main memory will have over 32 million 4k pages in a single zone. When a large
+fraction of these pages are not evictable for any reason [see below], vmscan
+will spend a lot of time scanning the LRU lists looking for the small fraction
+of pages that are evictable. This can result in a situation where all CPUs are
+spending 100% of their time in vmscan for hours or days on end, with the system
+completely unresponsive.
+
+The unevictable list addresses the following classes of unevictable pages:
+
+ (*) Those owned by ramfs.
+
+ (*) Those mapped into SHM_LOCK'd shared memory regions.
+
+ (*) Those mapped into VM_LOCKED [mlock()ed] VMAs.
+
+The infrastructure may also be able to handle other conditions that make pages
unevictable, either by definition or by circumstance, in the future.
-The Unevictable LRU List
+THE UNEVICTABLE PAGE LIST
+-------------------------
The Unevictable LRU infrastructure consists of an additional, per-zone, LRU list
called the "unevictable" list and an associated page flag, PG_unevictable, to
-indicate that the page is being managed on the unevictable list. The
-PG_unevictable flag is analogous to, and mutually exclusive with, the PG_active
-flag in that it indicates on which LRU list a page resides when PG_lru is set.
-The unevictable LRU list is source configurable based on the UNEVICTABLE_LRU
-Kconfig option.
+indicate that the page is being managed on the unevictable list.
+
+The PG_unevictable flag is analogous to, and mutually exclusive with, the
+PG_active flag in that it indicates on which LRU list a page resides when
+PG_lru is set. The unevictable list is compile-time configurable based on the
+UNEVICTABLE_LRU Kconfig option.
The Unevictable LRU infrastructure maintains unevictable pages on an additional
LRU list for a few reasons:
-1) We get to "treat unevictable pages just like we treat other pages in the
- system, which means we get to use the same code to manipulate them, the
- same code to isolate them (for migrate, etc.), the same code to keep track
- of the statistics, etc..." [Rik van Riel]
+ (1) We get to "treat unevictable pages just like we treat other pages in the
+ system - which means we get to use the same code to manipulate them, the
+ same code to isolate them (for migrate, etc.), the same code to keep track
+ of the statistics, etc..." [Rik van Riel]
+
+ (2) We want to be able to migrate unevictable pages between nodes for memory
+ defragmentation, workload management and memory hotplug. The linux kernel
+ can only migrate pages that it can successfully isolate from the LRU
+ lists. If we were to maintain pages elsewhere than on an LRU-like list,
+ where they can be found by isolate_lru_page(), we would prevent their
+ migration, unless we reworked migration code to find the unevictable pages
+ itself.
-2) We want to be able to migrate unevictable pages between nodes--for memory
- defragmentation, workload management and memory hotplug. The linux kernel
- can only migrate pages that it can successfully isolate from the lru lists.
- If we were to maintain pages elsewise than on an lru-like list, where they
- can be found by isolate_lru_page(), we would prevent their migration, unless
- we reworked migration code to find the unevictable pages.
+The unevictable list does not differentiate between file-backed and anonymous,
+swap-backed pages. This differentiation is only important while the pages are,
+in fact, evictable.
-The unevictable LRU list does not differentiate between file backed and swap
-backed [anon] pages. This differentiation is only important while the pages
-are, in fact, evictable.
+The unevictable list benefits from the "arrayification" of the per-zone LRU
+lists and statistics originally proposed and posted by Christoph Lameter.
-The unevictable LRU list benefits from the "arrayification" of the per-zone
-LRU lists and statistics originally proposed and posted by Christoph Lameter.
+The unevictable list does not use the LRU pagevec mechanism. Rather,
+unevictable pages are placed directly on the page's zone's unevictable list
+under the zone lru_lock. This allows us to prevent the stranding of pages on
+the unevictable list when one task has the page isolated from the LRU and other
+tasks are changing the "evictability" state of the page.
-The unevictable list does not use the lru pagevec mechanism. Rather,
-unevictable pages are placed directly on the page's zone's unevictable
-list under the zone lru_lock. The reason for this is to prevent stranding
-of pages on the unevictable list when one task has the page isolated from the
-lru and other tasks are changing the "evictability" state of the page.
+MEMORY CONTROL GROUP INTERACTION
+--------------------------------
-Unevictable LRU and Memory Controller Interaction
+The unevictable LRU facility interacts with the memory control group [aka
+memory controller; see Documentation/cgroups/memory.txt] by extending the
+lru_list enum.
+
+The memory controller data structure automatically gets a per-zone unevictable
+list as a result of the "arrayification" of the per-zone LRU lists (one per
+lru_list enum element). The memory controller tracks the movement of pages to
+and from the unevictable list.
-The memory controller data structure automatically gets a per zone unevictable
-lru list as a result of the "arrayification" of the per-zone LRU lists. The
-memory controller tracks the movement of pages to and from the unevictable list.
When a memory control group comes under memory pressure, the controller will
not attempt to reclaim pages on the unevictable list. This has a couple of
-effects. Because the pages are "hidden" from reclaim on the unevictable list,
-the reclaim process can be more efficient, dealing only with pages that have
-a chance of being reclaimed. On the other hand, if too many of the pages
-charged to the control group are unevictable, the evictable portion of the
-working set of the tasks in the control group may not fit into the available
-memory. This can cause the control group to thrash or to oom-kill tasks.
-
-
-Unevictable LRU: Detecting Unevictable Pages
-
-The function page_evictable(page, vma) in vmscan.c determines whether a
-page is evictable or not. For ramfs pages and pages in SHM_LOCKed regions,
-page_evictable() tests a new address space flag, AS_UNEVICTABLE, in the page's
-address space using a wrapper function. Wrapper functions are used to set,
-clear and test the flag to reduce the requirement for #ifdef's throughout the
-source code. AS_UNEVICTABLE is set on ramfs inode/mapping when it is created.
-This flag remains for the life of the inode.
-
-For shared memory regions, AS_UNEVICTABLE is set when an application
-successfully SHM_LOCKs the region and is removed when the region is
-SHM_UNLOCKed. Note that shmctl(SHM_LOCK, ...) does not populate the page
-tables for the region as does, for example, mlock(). So, we make no special
-effort to push any pages in the SHM_LOCKed region to the unevictable list.
-Vmscan will do this when/if it encounters the pages during reclaim. On
-SHM_UNLOCK, shmctl() scans the pages in the region and "rescues" them from the
-unevictable list if no other condition keeps them unevictable. If a SHM_LOCKed
-region is destroyed, the pages are also "rescued" from the unevictable list in
-the process of freeing them.
-
-page_evictable() detects mlock()ed pages by testing an additional page flag,
-PG_mlocked via the PageMlocked() wrapper. If the page is NOT mlocked, and a
-non-NULL vma is supplied, page_evictable() will check whether the vma is
+effects:
+
+ (1) Because the pages are "hidden" from reclaim on the unevictable list, the
+ reclaim process can be more efficient, dealing only with pages that have a
+ chance of being reclaimed.
+
+ (2) On the other hand, if too many of the pages charged to the control group
+ are unevictable, the evictable portion of the working set of the tasks in
+ the control group may not fit into the available memory. This can cause
+ the control group to thrash or to OOM-kill tasks.
+
+
+MARKING ADDRESS SPACES UNEVICTABLE
+----------------------------------
+
+For facilities such as ramfs none of the pages attached to the address space
+may be evicted. To prevent eviction of any such pages, the AS_UNEVICTABLE
+address space flag is provided, and this can be manipulated by a filesystem
+using a number of wrapper functions:
+
+ (*) void mapping_set_unevictable(struct address_space *mapping);
+
+ Mark the address space as being completely unevictable.
+
+ (*) void mapping_clear_unevictable(struct address_space *mapping);
+
+ Mark the address space as being evictable.
+
+ (*) int mapping_unevictable(struct address_space *mapping);
+
+ Query the address space, and return true if it is completely
+ unevictable.
+
+These are currently used in two places in the kernel:
+
+ (1) By ramfs to mark the address spaces of its inodes when they are created,
+ and this mark remains for the life of the inode.
+
+ (2) By SYSV SHM to mark SHM_LOCK'd address spaces until SHM_UNLOCK is called.
+
+ Note that SHM_LOCK is not required to page in the locked pages if they're
+ swapped out; the application must touch the pages manually if it wants to
+ ensure they're in memory.
+
+
+DETECTING UNEVICTABLE PAGES
+---------------------------
+
+The function page_evictable() in vmscan.c determines whether a page is
+evictable or not using the query function outlined above [see section "Marking
+address spaces unevictable"] to check the AS_UNEVICTABLE flag.
+
+For address spaces that are so marked after being populated (as SHM regions
+might be), the lock action (eg: SHM_LOCK) can be lazy, and need not populate
+the page tables for the region as does, for example, mlock(), nor need it make
+any special effort to push any pages in the SHM_LOCK'd area to the unevictable
+list. Instead, vmscan will do this if and when it encounters the pages during
+a reclamation scan.
+
+On an unlock action (such as SHM_UNLOCK), the unlocker (eg: shmctl()) must scan
+the pages in the region and "rescue" them from the unevictable list if no other
+condition is keeping them unevictable. If an unevictable region is destroyed,
+the pages are also "rescued" from the unevictable list in the process of
+freeing them.
+
+page_evictable() also checks for mlocked pages by testing an additional page
+flag, PG_mlocked (as wrapped by PageMlocked()). If the page is NOT mlocked,
+and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is
VM_LOCKED via is_mlocked_vma(). is_mlocked_vma() will SetPageMlocked() and
update the appropriate statistics if the vma is VM_LOCKED. This method allows
efficient "culling" of pages in the fault path that are being faulted in to
-VM_LOCKED vmas.
+VM_LOCKED VMAs.
-Unevictable Pages and Vmscan [shrink_*_list()]
+VMSCAN'S HANDLING OF UNEVICTABLE PAGES
+--------------------------------------
If unevictable pages are culled in the fault path, or moved to the unevictable
-list at mlock() or mmap() time, vmscan will never encounter the pages until
-they have become evictable again, for example, via munlock() and have been
-"rescued" from the unevictable list. However, there may be situations where we
-decide, for the sake of expediency, to leave a unevictable page on one of the
-regular active/inactive LRU lists for vmscan to deal with. Vmscan checks for
-such pages in all of the shrink_{active|inactive|page}_list() functions and
-will "cull" such pages that it encounters--that is, it diverts those pages to
-the unevictable list for the zone being scanned.
-
-There may be situations where a page is mapped into a VM_LOCKED vma, but the
-page is not marked as PageMlocked. Such pages will make it all the way to
+list at mlock() or mmap() time, vmscan will not encounter the pages until they
+have become evictable again (via munlock() for example) and have been "rescued"
+from the unevictable list. However, there may be situations where we decide,
+for the sake of expediency, to leave a unevictable page on one of the regular
+active/inactive LRU lists for vmscan to deal with. vmscan checks for such
+pages in all of the shrink_{active|inactive|page}_list() functions and will
+"cull" such pages that it encounters: that is, it diverts those pages to the
+unevictable list for the zone being scanned.
+
+There may be situations where a page is mapped into a VM_LOCKED VMA, but the
+page is not marked as PG_mlocked. Such pages will make it all the way to
shrink_page_list() where they will be detected when vmscan walks the reverse
-map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK, shrink_page_list()
-will cull the page at that point.
+map in try_to_unmap(). If try_to_unmap() returns SWAP_MLOCK,
+shrink_page_list() will cull the page at that point.
-To "cull" an unevictable page, vmscan simply puts the page back on the lru
-list using putback_lru_page()--the inverse operation to isolate_lru_page()--
-after dropping the page lock. Because the condition which makes the page
-unevictable may change once the page is unlocked, putback_lru_page() will
-recheck the unevictable state of a page that it places on the unevictable lru
-list. If the page has become unevictable, putback_lru_page() removes it from
-the list and retries, including the page_unevictable() test. Because such a
-race is a rare event and movement of pages onto the unevictable list should be
-rare, these extra evictabilty checks should not occur in the majority of calls
-to putback_lru_page().
+To "cull" an unevictable page, vmscan simply puts the page back on the LRU list
+using putback_lru_page() - the inverse operation to isolate_lru_page() - after
+dropping the page lock. Because the condition which makes the page unevictable
+may change once the page is unlocked, putback_lru_page() will recheck the
+unevictable state of a page that it places on the unevictable list. If the
+page has become unevictable, putback_lru_page() removes it from the list and
+retries, including the page_unevictable() test. Because such a race is a rare
+event and movement of pages onto the unevictable list should be rare, these
+extra evictabilty checks should not occur in the majority of calls to
+putback_lru_page().
-Mlocked Page: Prior Work
+=============
+MLOCKED PAGES
+=============
-The "Unevictable Mlocked Pages" infrastructure is based on work originally
+The unevictable page list is also useful for mlock(), in addition to ramfs and
+SYSV SHM. Note that mlock() is only available in CONFIG_MMU=y situations; in
+NOMMU situations, all mappings are effectively mlocked.
+
+
+HISTORY
+-------
+
+The "Unevictable mlocked Pages" infrastructure is based on work originally
posted by Nick Piggin in an RFC patch entitled "mm: mlocked pages off LRU".
-Nick posted his patch as an alternative to a patch posted by Christoph
-Lameter to achieve the same objective--hiding mlocked pages from vmscan.
-In Nick's patch, he used one of the struct page lru list link fields as a count
-of VM_LOCKED vmas that map the page. This use of the link field for a count
-prevented the management of the pages on an LRU list. Thus, mlocked pages were
-not migratable as isolate_lru_page() could not find them and the lru list link
-field was not available to the migration subsystem. Nick resolved this by
-putting mlocked pages back on the lru list before attempting to isolate them,
-thus abandoning the count of VM_LOCKED vmas. When Nick's patch was integrated
-with the Unevictable LRU work, the count was replaced by walking the reverse
-map to determine whether any VM_LOCKED vmas mapped the page. More on this
-below.
-
-
-Mlocked Pages: Basic Management
-
-Mlocked pages--pages mapped into a VM_LOCKED vma--represent one class of
-unevictable pages. When such a page has been "noticed" by the memory
-management subsystem, the page is marked with the PG_mlocked [PageMlocked()]
-flag. A PageMlocked() page will be placed on the unevictable LRU list when
-it is added to the LRU. Pages can be "noticed" by memory management in
-several places:
-
-1) in the mlock()/mlockall() system call handlers.
-2) in the mmap() system call handler when mmap()ing a region with the
- MAP_LOCKED flag, or mmap()ing a region in a task that has called
- mlockall() with the MCL_FUTURE flag. Both of these conditions result
- in the VM_LOCKED flag being set for the vma.
-3) in the fault path, if mlocked pages are "culled" in the fault path,
- and when a VM_LOCKED stack segment is expanded.
-4) as mentioned above, in vmscan:shrink_page_list() when attempting to
- reclaim a page in a VM_LOCKED vma via try_to_unmap().
-
-Mlocked pages become unlocked and rescued from the unevictable list when:
-
-1) mapped in a range unlocked via the munlock()/munlockall() system calls.
-2) munmapped() out of the last VM_LOCKED vma that maps the page, including
- unmapping at task exit.
-3) when the page is truncated from the last VM_LOCKED vma of an mmap()ed file.
-4) before a page is COWed in a VM_LOCKED vma.
-
-
-Mlocked Pages: mlock()/mlockall() System Call Handling
+Nick posted his patch as an alternative to a patch posted by Christoph Lameter
+to achieve the same objective: hiding mlocked pages from vmscan.
+
+In Nick's patch, he used one of the struct page LRU list link fields as a count
+of VM_LOCKED VMAs that map the page. This use of the link field for a count
+prevented the management of the pages on an LRU list, and thus mlocked pages
+were not migratable as isolate_lru_page() could not find them, and the LRU list
+link field was not available to the migration subsystem.
+
+Nick resolved this by putting mlocked pages back on the lru list before
+attempting to isolate them, thus abandoning the count of VM_LOCKED VMAs. When
+Nick's patch was integrated with the Unevictable LRU work, the count was
+replaced by walking the reverse map to determine whether any VM_LOCKED VMAs
+mapped the page. More on this below.
+
+
+BASIC MANAGEMENT
+----------------
+
+mlocked pages - pages mapped into a VM_LOCKED VMA - are a class of unevictable
+pages. When such a page has been "noticed" by the memory management subsystem,
+the page is marked with the PG_mlocked flag. This can be manipulated using the
+PageMlocked() functions.
+
+A PG_mlocked page will be placed on the unevictable list when it is added to
+the LRU. Such pages can be "noticed" by memory management in several places:
+
+ (1) in the mlock()/mlockall() system call handlers;
+
+ (2) in the mmap() system call handler when mmapping a region with the
+ MAP_LOCKED flag;
+
+ (3) mmapping a region in a task that has called mlockall() with the MCL_FUTURE
+ flag
+
+ (4) in the fault path, if mlocked pages are "culled" in the fault path,
+ and when a VM_LOCKED stack segment is expanded; or
+
+ (5) as mentioned above, in vmscan:shrink_page_list() when attempting to
+ reclaim a page in a VM_LOCKED VMA via try_to_unmap()
+
+all of which result in the VM_LOCKED flag being set for the VMA if it doesn't
+already have it set.
+
+mlocked pages become unlocked and rescued from the unevictable list when:
+
+ (1) mapped in a range unlocked via the munlock()/munlockall() system calls;
+
+ (2) munmap()'d out of the last VM_LOCKED VMA that maps the page, including
+ unmapping at task exit;
+
+ (3) when the page is truncated from the last VM_LOCKED VMA of an mmapped file;
+ or
+
+ (4) before a page is COW'd in a VM_LOCKED VMA.
+
+
+mlock()/mlockall() SYSTEM CALL HANDLING
+---------------------------------------
Both [do_]mlock() and [do_]mlockall() system call handlers call mlock_fixup()
-for each vma in the range specified by the call. In the case of mlockall(),
+for each VMA in the range specified by the call. In the case of mlockall(),
this is the entire active address space of the task. Note that mlock_fixup()
-is used for both mlock()ing and munlock()ing a range of memory. A call to
-mlock() an already VM_LOCKED vma, or to munlock() a vma that is not VM_LOCKED
-is treated as a no-op--mlock_fixup() simply returns.
-
-If the vma passes some filtering described in "Mlocked Pages: Filtering Vmas"
-below, mlock_fixup() will attempt to merge the vma with its neighbors or split
-off a subset of the vma if the range does not cover the entire vma. Once the
-vma has been merged or split or neither, mlock_fixup() will call
-__mlock_vma_pages_range() to fault in the pages via get_user_pages() and
-to mark the pages as mlocked via mlock_vma_page().
-
-Note that the vma being mlocked might be mapped with PROT_NONE. In this case,
-get_user_pages() will be unable to fault in the pages. That's OK. If pages
-do end up getting faulted into this VM_LOCKED vma, we'll handle them in the
+is used for both mlocking and munlocking a range of memory. A call to mlock()
+an already VM_LOCKED VMA, or to munlock() a VMA that is not VM_LOCKED is
+treated as a no-op, and mlock_fixup() simply returns.
+
+If the VMA passes some filtering as described in "Filtering Special Vmas"
+below, mlock_fixup() will attempt to merge the VMA with its neighbors or split
+off a subset of the VMA if the range does not cover the entire VMA. Once the
+VMA has been merged or split or neither, mlock_fixup() will call
+__mlock_vma_pages_range() to fault in the pages via get_user_pages() and to
+mark the pages as mlocked via mlock_vma_page().
+
+Note that the VMA being mlocked might be mapped with PROT_NONE. In this case,
+get_user_pages() will be unable to fault in the pages. That's okay. If pages
+do end up getting faulted into this VM_LOCKED VMA, we'll handle them in the
fault path or in vmscan.
Also note that a page returned by get_user_pages() could be truncated or
-migrated out from under us, while we're trying to mlock it. To detect
-this, __mlock_vma_pages_range() tests the page_mapping after acquiring
-the page lock. If the page is still associated with its mapping, we'll
-go ahead and call mlock_vma_page(). If the mapping is gone, we just
-unlock the page and move on. Worse case, this results in page mapped
-in a VM_LOCKED vma remaining on a normal LRU list without being
-PageMlocked(). Again, vmscan will detect and cull such pages.
-
-mlock_vma_page(), called with the page locked [N.B., not "mlocked"], will
-TestSetPageMlocked() for each page returned by get_user_pages(). We use
-TestSetPageMlocked() because the page might already be mlocked by another
-task/vma and we don't want to do extra work. We especially do not want to
-count an mlocked page more than once in the statistics. If the page was
-already mlocked, mlock_vma_page() is done.
+migrated out from under us, while we're trying to mlock it. To detect this,
+__mlock_vma_pages_range() checks page_mapping() after acquiring the page lock.
+If the page is still associated with its mapping, we'll go ahead and call
+mlock_vma_page(). If the mapping is gone, we just unlock the page and move on.
+In the worst case, this will result in a page mapped in a VM_LOCKED VMA
+remaining on a normal LRU list without being PageMlocked(). Again, vmscan will
+detect and cull such pages.
+
+mlock_vma_page() will call TestSetPageMlocked() for each page returned by
+get_user_pages(). We use TestSetPageMlocked() because the page might already
+be mlocked by another task/VMA and we don't want to do extra work. We
+especially do not want to count an mlocked page more than once in the
+statistics. If the page was already mlocked, mlock_vma_page() need do nothing
+more.
If the page was NOT already mlocked, mlock_vma_page() attempts to isolate the
page from the LRU, as it is likely on the appropriate active or inactive list
-at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will
-putback the page--putback_lru_page()--which will notice that the page is now
-mlocked and divert the page to the zone's unevictable LRU list. If
+at that time. If the isolate_lru_page() succeeds, mlock_vma_page() will put
+back the page - by calling putback_lru_page() - which will notice that the page
+is now mlocked and divert the page to the zone's unevictable list. If
mlock_vma_page() is unable to isolate the page from the LRU, vmscan will handle
-it later if/when it attempts to reclaim the page.
+it later if and when it attempts to reclaim the page.
-Mlocked Pages: Filtering Special Vmas
+FILTERING SPECIAL VMAS
+----------------------
-mlock_fixup() filters several classes of "special" vmas:
+mlock_fixup() filters several classes of "special" VMAs:
-1) vmas with VM_IO|VM_PFNMAP set are skipped entirely. The pages behind
+1) VMAs with VM_IO or VM_PFNMAP set are skipped entirely. The pages behind
these mappings are inherently pinned, so we don't need to mark them as
- mlocked. In any case, most of the pages have no struct page in which to
- so mark the page. Because of this, get_user_pages() will fail for these
- vmas, so there is no sense in attempting to visit them.
-
-2) vmas mapping hugetlbfs page are already effectively pinned into memory.
- We don't need nor want to mlock() these pages. However, to preserve the
- prior behavior of mlock()--before the unevictable/mlock changes--
- mlock_fixup() will call make_pages_present() in the hugetlbfs vma range
- to allocate the huge pages and populate the ptes.
-
-3) vmas with VM_DONTEXPAND|VM_RESERVED are generally user space mappings of
- kernel pages, such as the vdso page, relay channel pages, etc. These pages
+ mlocked. In any case, most of the pages have no struct page in which to so
+ mark the page. Because of this, get_user_pages() will fail for these VMAs,
+ so there is no sense in attempting to visit them.
+
+2) VMAs mapping hugetlbfs page are already effectively pinned into memory. We
+ neither need nor want to mlock() these pages. However, to preserve the
+ prior behavior of mlock() - before the unevictable/mlock changes -
+ mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to
+ allocate the huge pages and populate the ptes.
+
+3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of
+ kernel pages, such as the VDSO page, relay channel pages, etc. These pages
are inherently unevictable and are not managed on the LRU lists.
- mlock_fixup() treats these vmas the same as hugetlbfs vmas. It calls
+ mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls
make_pages_present() to populate the ptes.
-Note that for all of these special vmas, mlock_fixup() does not set the
+Note that for all of these special VMAs, mlock_fixup() does not set the
VM_LOCKED flag. Therefore, we won't have to deal with them later during
-munlock() or munmap()--for example, at task exit. Neither does mlock_fixup()
-account these vmas against the task's "locked_vm".
-
-Mlocked Pages: Downgrading the Mmap Semaphore.
-
-mlock_fixup() must be called with the mmap semaphore held for write, because
-it may have to merge or split vmas. However, mlocking a large region of
-memory can take a long time--especially if vmscan must reclaim pages to
-satisfy the regions requirements. Faulting in a large region with the mmap
-semaphore held for write can hold off other faults on the address space, in
-the case of a multi-threaded task. It can also hold off scans of the task's
-address space via /proc. While testing under heavy load, it was observed that
-the ps(1) command could be held off for many minutes while a large segment was
-mlock()ed down.
-
-To address this issue, and to make the system more responsive during mlock()ing
-of large segments, mlock_fixup() downgrades the mmap semaphore to read mode
-during the call to __mlock_vma_pages_range(). This works fine. However, the
-callers of mlock_fixup() expect the semaphore to be returned in write mode.
-So, mlock_fixup() "upgrades" the semphore to write mode. Linux does not
-support an atomic upgrade_sem() call, so mlock_fixup() must drop the semaphore
-and reacquire it in write mode. In a multi-threaded task, it is possible for
-the task memory map to change while the semaphore is dropped. Therefore,
-mlock_fixup() looks up the vma at the range start address after reacquiring
-the semaphore in write mode and verifies that it still covers the original
-range. If not, mlock_fixup() returns an error [-EAGAIN]. All callers of
-mlock_fixup() have been changed to deal with this new error condition.
-
-Note: when munlocking a region, all of the pages should already be resident--
-unless we have racing threads mlocking() and munlocking() regions. So,
-unlocking should not have to wait for page allocations nor faults of any kind.
-Therefore mlock_fixup() does not downgrade the semaphore for munlock().
-
-
-Mlocked Pages: munlock()/munlockall() System Call Handling
-
-The munlock() and munlockall() system calls are handled by the same functions--
-do_mlock[all]()--as the mlock() and mlockall() system calls with the unlock
-vs lock operation indicated by an argument. So, these system calls are also
-handled by mlock_fixup(). Again, if called for an already munlock()ed vma,
-mlock_fixup() simply returns. Because of the vma filtering discussed above,
-VM_LOCKED will not be set in any "special" vmas. So, these vmas will be
+munlock(), munmap() or task exit. Neither does mlock_fixup() account these
+VMAs against the task's "locked_vm".
+
+
+munlock()/munlockall() SYSTEM CALL HANDLING
+-------------------------------------------
+
+The munlock() and munlockall() system calls are handled by the same functions -
+do_mlock[all]() - as the mlock() and mlockall() system calls with the unlock vs
+lock operation indicated by an argument. So, these system calls are also
+handled by mlock_fixup(). Again, if called for an already munlocked VMA,
+mlock_fixup() simply returns. Because of the VMA filtering discussed above,
+VM_LOCKED will not be set in any "special" VMAs. So, these VMAs will be
ignored for munlock.
-If the vma is VM_LOCKED, mlock_fixup() again attempts to merge or split off
-the specified range. The range is then munlocked via the function
-__mlock_vma_pages_range()--the same function used to mlock a vma range--
+If the VMA is VM_LOCKED, mlock_fixup() again attempts to merge or split off the
+specified range. The range is then munlocked via the function
+__mlock_vma_pages_range() - the same function used to mlock a VMA range -
passing a flag to indicate that munlock() is being performed.
-Because the vma access protections could have been changed to PROT_NONE after
+Because the VMA access protections could have been changed to PROT_NONE after
faulting in and mlocking pages, get_user_pages() was unreliable for visiting
-these pages for munlocking. Because we don't want to leave pages mlocked(),
+these pages for munlocking. Because we don't want to leave pages mlocked,
get_user_pages() was enhanced to accept a flag to ignore the permissions when
-fetching the pages--all of which should be resident as a result of previous
-mlock()ing.
+fetching the pages - all of which should be resident as a result of previous
+mlocking.
For munlock(), __mlock_vma_pages_range() unlocks individual pages by calling
munlock_vma_page(). munlock_vma_page() unconditionally clears the PG_mlocked
-flag using TestClearPageMlocked(). As with mlock_vma_page(), munlock_vma_page()
-use the Test*PageMlocked() function to handle the case where the page might
-have already been unlocked by another task. If the page was mlocked,
-munlock_vma_page() updates that zone statistics for the number of mlocked
-pages. Note, however, that at this point we haven't checked whether the page
-is mapped by other VM_LOCKED vmas.
-
-We can't call try_to_munlock(), the function that walks the reverse map to check
-for other VM_LOCKED vmas, without first isolating the page from the LRU.
+flag using TestClearPageMlocked(). As with mlock_vma_page(),
+munlock_vma_page() use the Test*PageMlocked() function to handle the case where
+the page might have already been unlocked by another task. If the page was
+mlocked, munlock_vma_page() updates that zone statistics for the number of
+mlocked pages. Note, however, that at this point we haven't checked whether
+the page is mapped by other VM_LOCKED VMAs.
+
+We can't call try_to_munlock(), the function that walks the reverse map to
+check for other VM_LOCKED VMAs, without first isolating the page from the LRU.
try_to_munlock() is a variant of try_to_unmap() and thus requires that the page
-not be on an lru list. [More on these below.] However, the call to
-isolate_lru_page() could fail, in which case we couldn't try_to_munlock().
-So, we go ahead and clear PG_mlocked up front, as this might be the only chance
-we have. If we can successfully isolate the page, we go ahead and
+not be on an LRU list [more on these below]. However, the call to
+isolate_lru_page() could fail, in which case we couldn't try_to_munlock(). So,
+we go ahead and clear PG_mlocked up front, as this might be the only chance we
+have. If we can successfully isolate the page, we go ahead and
try_to_munlock(), which will restore the PG_mlocked flag and update the zone
-page statistics if it finds another vma holding the page mlocked. If we fail
+page statistics if it finds another VMA holding the page mlocked. If we fail
to isolate the page, we'll have left a potentially mlocked page on the LRU.
-This is fine, because we'll catch it later when/if vmscan tries to reclaim the
-page. This should be relatively rare.
-
-Mlocked Pages: Migrating Them...
-
-A page that is being migrated has been isolated from the lru lists and is
-held locked across unmapping of the page, updating the page's mapping
-[address_space] entry and copying the contents and state, until the
-page table entry has been replaced with an entry that refers to the new
-page. Linux supports migration of mlocked pages and other unevictable
-pages. This involves simply moving the PageMlocked and PageUnevictable states
-from the old page to the new page.
-
-Note that page migration can race with mlocking or munlocking of the same
-page. This has been discussed from the mlock/munlock perspective in the
-respective sections above. Both processes [migration, m[un]locking], hold
-the page locked. This provides the first level of synchronization. Page
-migration zeros out the page_mapping of the old page before unlocking it,
-so m[un]lock can skip these pages by testing the page mapping under page
-lock.
-
-When completing page migration, we place the new and old pages back onto the
-lru after dropping the page lock. The "unneeded" page--old page on success,
-new page on failure--will be freed when the reference count held by the
-migration process is released. To ensure that we don't strand pages on the
-unevictable list because of a race between munlock and migration, page
-migration uses the putback_lru_page() function to add migrated pages back to
-the lru.
-
-
-Mlocked Pages: mmap(MAP_LOCKED) System Call Handling
+This is fine, because we'll catch it later if and if vmscan tries to reclaim
+the page. This should be relatively rare.
+
+
+MIGRATING MLOCKED PAGES
+-----------------------
+
+A page that is being migrated has been isolated from the LRU lists and is held
+locked across unmapping of the page, updating the page's address space entry
+and copying the contents and state, until the page table entry has been
+replaced with an entry that refers to the new page. Linux supports migration
+of mlocked pages and other unevictable pages. This involves simply moving the
+PG_mlocked and PG_unevictable states from the old page to the new page.
+
+Note that page migration can race with mlocking or munlocking of the same page.
+This has been discussed from the mlock/munlock perspective in the respective
+sections above. Both processes (migration and m[un]locking) hold the page
+locked. This provides the first level of synchronization. Page migration
+zeros out the page_mapping of the old page before unlocking it, so m[un]lock
+can skip these pages by testing the page mapping under page lock.
+
+To complete page migration, we place the new and old pages back onto the LRU
+after dropping the page lock. The "unneeded" page - old page on success, new
+page on failure - will be freed when the reference count held by the migration
+process is released. To ensure that we don't strand pages on the unevictable
+list because of a race between munlock and migration, page migration uses the
+putback_lru_page() function to add migrated pages back to the LRU.
+
+
+mmap(MAP_LOCKED) SYSTEM CALL HANDLING
+-------------------------------------
In addition the the mlock()/mlockall() system calls, an application can request
-that a region of memory be mlocked using the MAP_LOCKED flag with the mmap()
+that a region of memory be mlocked supplying the MAP_LOCKED flag to the mmap()
call. Furthermore, any mmap() call or brk() call that expands the heap by a
task that has previously called mlockall() with the MCL_FUTURE flag will result
-in the newly mapped memory being mlocked. Before the unevictable/mlock changes,
-the kernel simply called make_pages_present() to allocate pages and populate
-the page table.
+in the newly mapped memory being mlocked. Before the unevictable/mlock
+changes, the kernel simply called make_pages_present() to allocate pages and
+populate the page table.
To mlock a range of memory under the unevictable/mlock infrastructure, the
mmap() handler and task address space expansion functions call
mlock_vma_pages_range() specifying the vma and the address range to mlock.
-mlock_vma_pages_range() filters vmas like mlock_fixup(), as described above in
-"Mlocked Pages: Filtering Vmas". It will clear the VM_LOCKED flag, which will
-have already been set by the caller, in filtered vmas. Thus these vma's need
-not be visited for munlock when the region is unmapped.
+mlock_vma_pages_range() filters VMAs like mlock_fixup(), as described above in
+"Filtering Special VMAs". It will clear the VM_LOCKED flag, which will have
+already been set by the caller, in filtered VMAs. Thus these VMA's need not be
+visited for munlock when the region is unmapped.
-For "normal" vmas, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
+For "normal" VMAs, mlock_vma_pages_range() calls __mlock_vma_pages_range() to
fault/allocate the pages and mlock them. Again, like mlock_fixup(),
mlock_vma_pages_range() downgrades the mmap semaphore to read mode before
-attempting to fault/allocate and mlock the pages; and "upgrades" the semaphore
+attempting to fault/allocate and mlock the pages and "upgrades" the semaphore
back to write mode before returning.
-The callers of mlock_vma_pages_range() will have already added the memory
-range to be mlocked to the task's "locked_vm". To account for filtered vmas,
+The callers of mlock_vma_pages_range() will have already added the memory range
+to be mlocked to the task's "locked_vm". To account for filtered VMAs,
mlock_vma_pages_range() returns the number of pages NOT mlocked. All of the
-callers then subtract a non-negative return value from the task's locked_vm.
-A negative return value represent an error--for example, from get_user_pages()
-attempting to fault in a vma with PROT_NONE access. In this case, we leave
-the memory range accounted as locked_vm, as the protections could be changed
-later and pages allocated into that region.
+callers then subtract a non-negative return value from the task's locked_vm. A
+negative return value represent an error - for example, from get_user_pages()
+attempting to fault in a VMA with PROT_NONE access. In this case, we leave the
+memory range accounted as locked_vm, as the protections could be changed later
+and pages allocated into that region.
-Mlocked Pages: munmap()/exit()/exec() System Call Handling
+munmap()/exit()/exec() SYSTEM CALL HANDLING
+-------------------------------------------
When unmapping an mlocked region of memory, whether by an explicit call to
munmap() or via an internal unmap from exit() or exec() processing, we must
-munlock the pages if we're removing the last VM_LOCKED vma that maps the pages.
+munlock the pages if we're removing the last VM_LOCKED VMA that maps the pages.
Before the unevictable/mlock changes, mlocking did not mark the pages in any
way, so unmapping them required no processing.
To munlock a range of memory under the unevictable/mlock infrastructure, the
-munmap() hander and task address space tear down function call
+munmap() handler and task address space call tear down function
munlock_vma_pages_all(). The name reflects the observation that one always
-specifies the entire vma range when munlock()ing during unmap of a region.
-Because of the vma filtering when mlocking() regions, only "normal" vmas that
+specifies the entire VMA range when munlock()ing during unmap of a region.
+Because of the VMA filtering when mlocking() regions, only "normal" VMAs that
actually contain mlocked pages will be passed to munlock_vma_pages_all().
-munlock_vma_pages_all() clears the VM_LOCKED vma flag and, like mlock_fixup()
+munlock_vma_pages_all() clears the VM_LOCKED VMA flag and, like mlock_fixup()
for the munlock case, calls __munlock_vma_pages_range() to walk the page table
-for the vma's memory range and munlock_vma_page() each resident page mapped by
-the vma. This effectively munlocks the page, only if this is the last
-VM_LOCKED vma that maps the page.
-
+for the VMA's memory range and munlock_vma_page() each resident page mapped by
+the VMA. This effectively munlocks the page, only if this is the last
+VM_LOCKED VMA that maps the page.
-Mlocked Page: try_to_unmap()
-[Note: the code changes represented by this section are really quite small
-compared to the text to describe what happening and why, and to discuss the
-implications.]
+try_to_unmap()
+--------------
-Pages can, of course, be mapped into multiple vmas. Some of these vmas may
+Pages can, of course, be mapped into multiple VMAs. Some of these VMAs may
have VM_LOCKED flag set. It is possible for a page mapped into one or more
-VM_LOCKED vmas not to have the PG_mlocked flag set and therefore reside on one
-of the active or inactive LRU lists. This could happen if, for example, a
-task in the process of munlock()ing the page could not isolate the page from
-the LRU. As a result, vmscan/shrink_page_list() might encounter such a page
-as described in "Unevictable Pages and Vmscan [shrink_*_list()]". To
-handle this situation, try_to_unmap() has been enhanced to check for VM_LOCKED
-vmas while it is walking a page's reverse map.
+VM_LOCKED VMAs not to have the PG_mlocked flag set and therefore reside on one
+of the active or inactive LRU lists. This could happen if, for example, a task
+in the process of munlocking the page could not isolate the page from the LRU.
+As a result, vmscan/shrink_page_list() might encounter such a page as described
+in section "vmscan's handling of unevictable pages". To handle this situation,
+try_to_unmap() checks for VM_LOCKED VMAs while it is walking a page's reverse
+map.
try_to_unmap() is always called, by either vmscan for reclaim or for page
-migration, with the argument page locked and isolated from the LRU. BUG_ON()
-assertions enforce this requirement. Separate functions handle anonymous and
-mapped file pages, as these types of pages have different reverse map
-mechanisms.
-
- try_to_unmap_anon()
-
-To unmap anonymous pages, each vma in the list anchored in the anon_vma must be
-visited--at least until a VM_LOCKED vma is encountered. If the page is being
-unmapped for migration, VM_LOCKED vmas do not stop the process because mlocked
-pages are migratable. However, for reclaim, if the page is mapped into a
-VM_LOCKED vma, the scan stops. try_to_unmap() attempts to acquire the mmap
-semphore of the mm_struct to which the vma belongs in read mode. If this is
-successful, try_to_unmap() will mlock the page via mlock_vma_page()--we
-wouldn't have gotten to try_to_unmap() if the page were already mlocked--and
-will return SWAP_MLOCK, indicating that the page is unevictable. If the
-mmap semaphore cannot be acquired, we are not sure whether the page is really
-unevictable or not. In this case, try_to_unmap() will return SWAP_AGAIN.
-
- try_to_unmap_file() -- linear mappings
-
-Unmapping of a mapped file page works the same, except that the scan visits
-all vmas that maps the page's index/page offset in the page's mapping's
-reverse map priority search tree. It must also visit each vma in the page's
-mapping's non-linear list, if the list is non-empty. As for anonymous pages,
-on encountering a VM_LOCKED vma for a mapped file page, try_to_unmap() will
-attempt to acquire the associated mm_struct's mmap semaphore to mlock the page,
-returning SWAP_MLOCK if this is successful, and SWAP_AGAIN, if not.
-
- try_to_unmap_file() -- non-linear mappings
-
-If a page's mapping contains a non-empty non-linear mapping vma list, then
-try_to_un{map|lock}() must also visit each vma in that list to determine
-whether the page is mapped in a VM_LOCKED vma. Again, the scan must visit
-all vmas in the non-linear list to ensure that the pages is not/should not be
-mlocked. If a VM_LOCKED vma is found in the list, the scan could terminate.
-However, there is no easy way to determine whether the page is actually mapped
-in a given vma--either for unmapping or testing whether the VM_LOCKED vma
-actually pins the page.
-
-So, try_to_unmap_file() handles non-linear mappings by scanning a certain
-number of pages--a "cluster"--in each non-linear vma associated with the page's
-mapping, for each file mapped page that vmscan tries to unmap. If this happens
-to unmap the page we're trying to unmap, try_to_unmap() will notice this on
-return--(page_mapcount(page) == 0)--and return SWAP_SUCCESS. Otherwise, it
-will return SWAP_AGAIN, causing vmscan to recirculate this page. We take
-advantage of the cluster scan in try_to_unmap_cluster() as follows:
-
-For each non-linear vma, try_to_unmap_cluster() attempts to acquire the mmap
-semaphore of the associated mm_struct for read without blocking. If this
-attempt is successful and the vma is VM_LOCKED, try_to_unmap_cluster() will
-retain the mmap semaphore for the scan; otherwise it drops it here. Then,
-for each page in the cluster, if we're holding the mmap semaphore for a locked
-vma, try_to_unmap_cluster() calls mlock_vma_page() to mlock the page. This
-call is a no-op if the page is already locked, but will mlock any pages in
-the non-linear mapping that happen to be unlocked. If one of the pages so
-mlocked is the page passed in to try_to_unmap(), try_to_unmap_cluster() will
-return SWAP_MLOCK, rather than the default SWAP_AGAIN. This will allow vmscan
-to cull the page, rather than recirculating it on the inactive list. Again,
-if try_to_unmap_cluster() cannot acquire the vma's mmap sem, it returns
-SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED vma, but
-couldn't be mlocked.
-
-
-Mlocked pages: try_to_munlock() Reverse Map Scan
-
-TODO/FIXME: a better name might be page_mlocked()--analogous to the
-page_referenced() reverse map walker.
-
-When munlock_vma_page()--see "Mlocked Pages: munlock()/munlockall()
-System Call Handling" above--tries to munlock a page, it needs to
-determine whether or not the page is mapped by any VM_LOCKED vma, without
-actually attempting to unmap all ptes from the page. For this purpose, the
-unevictable/mlock infrastructure introduced a variant of try_to_unmap() called
-try_to_munlock().
+migration, with the argument page locked and isolated from the LRU. Separate
+functions handle anonymous and mapped file pages, as these types of pages have
+different reverse map mechanisms.
+
+ (*) try_to_unmap_anon()
+
+ To unmap anonymous pages, each VMA in the list anchored in the anon_vma
+ must be visited - at least until a VM_LOCKED VMA is encountered. If the
+ page is being unmapped for migration, VM_LOCKED VMAs do not stop the
+ process because mlocked pages are migratable. However, for reclaim, if
+ the page is mapped into a VM_LOCKED VMA, the scan stops.
+
+ try_to_unmap_anon() attempts to acquire in read mode the mmap semphore of
+ the mm_struct to which the VMA belongs. If this is successful, it will
+ mlock the page via mlock_vma_page() - we wouldn't have gotten to
+ try_to_unmap_anon() if the page were already mlocked - and will return
+ SWAP_MLOCK, indicating that the page is unevictable.
+
+ If the mmap semaphore cannot be acquired, we are not sure whether the page
+ is really unevictable or not. In this case, try_to_unmap_anon() will
+ return SWAP_AGAIN.
+
+ (*) try_to_unmap_file() - linear mappings
+
+ Unmapping of a mapped file page works the same as for anonymous mappings,
+ except that the scan visits all VMAs that map the page's index/page offset
+ in the page's mapping's reverse map priority search tree. It also visits
+ each VMA in the page's mapping's non-linear list, if the list is
+ non-empty.
+
+ As for anonymous pages, on encountering a VM_LOCKED VMA for a mapped file
+ page, try_to_unmap_file() will attempt to acquire the associated
+ mm_struct's mmap semaphore to mlock the page, returning SWAP_MLOCK if this
+ is successful, and SWAP_AGAIN, if not.
+
+ (*) try_to_unmap_file() - non-linear mappings
+
+ If a page's mapping contains a non-empty non-linear mapping VMA list, then
+ try_to_un{map|lock}() must also visit each VMA in that list to determine
+ whether the page is mapped in a VM_LOCKED VMA. Again, the scan must visit
+ all VMAs in the non-linear list to ensure that the pages is not/should not
+ be mlocked.
+
+ If a VM_LOCKED VMA is found in the list, the scan could terminate.
+ However, there is no easy way to determine whether the page is actually
+ mapped in a given VMA - either for unmapping or testing whether the
+ VM_LOCKED VMA actually pins the page.
+
+ try_to_unmap_file() handles non-linear mappings by scanning a certain
+ number of pages - a "cluster" - in each non-linear VMA associated with the
+ page's mapping, for each file mapped page that vmscan tries to unmap. If
+ this happens to unmap the page we're trying to unmap, try_to_unmap() will
+ notice this on return (page_mapcount(page) will be 0) and return
+ SWAP_SUCCESS. Otherwise, it will return SWAP_AGAIN, causing vmscan to
+ recirculate this page. We take advantage of the cluster scan in
+ try_to_unmap_cluster() as follows:
+
+ For each non-linear VMA, try_to_unmap_cluster() attempts to acquire the
+ mmap semaphore of the associated mm_struct for read without blocking.
+
+ If this attempt is successful and the VMA is VM_LOCKED,
+ try_to_unmap_cluster() will retain the mmap semaphore for the scan;
+ otherwise it drops it here.
+
+ Then, for each page in the cluster, if we're holding the mmap semaphore
+ for a locked VMA, try_to_unmap_cluster() calls mlock_vma_page() to
+ mlock the page. This call is a no-op if the page is already locked,
+ but will mlock any pages in the non-linear mapping that happen to be
+ unlocked.
+
+ If one of the pages so mlocked is the page passed in to try_to_unmap(),
+ try_to_unmap_cluster() will return SWAP_MLOCK, rather than the default
+ SWAP_AGAIN. This will allow vmscan to cull the page, rather than
+ recirculating it on the inactive list.
+
+ Again, if try_to_unmap_cluster() cannot acquire the VMA's mmap sem, it
+ returns SWAP_AGAIN, indicating that the page is mapped by a VM_LOCKED
+ VMA, but couldn't be mlocked.
+
+
+try_to_munlock() REVERSE MAP SCAN
+---------------------------------
+
+ [!] TODO/FIXME: a better name might be page_mlocked() - analogous to the
+ page_referenced() reverse map walker.
+
+When munlock_vma_page() [see section "munlock()/munlockall() System Call
+Handling" above] tries to munlock a page, it needs to determine whether or not
+the page is mapped by any VM_LOCKED VMA without actually attempting to unmap
+all PTEs from the page. For this purpose, the unevictable/mlock infrastructure
+introduced a variant of try_to_unmap() called try_to_munlock().
try_to_munlock() calls the same functions as try_to_unmap() for anonymous and
mapped file pages with an additional argument specifing unlock versus unmap
processing. Again, these functions walk the respective reverse maps looking
-for VM_LOCKED vmas. When such a vma is found for anonymous pages and file
+for VM_LOCKED VMAs. When such a VMA is found for anonymous pages and file
pages mapped in linear VMAs, as in the try_to_unmap() case, the functions
attempt to acquire the associated mmap semphore, mlock the page via
mlock_vma_page() and return SWAP_MLOCK. This effectively undoes the
pre-clearing of the page's PG_mlocked done by munlock_vma_page.
-If try_to_unmap() is unable to acquire a VM_LOCKED vma's associated mmap
-semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list()
-to recycle the page on the inactive list and hope that it has better luck
-with the page next time.
-
-For file pages mapped into non-linear vmas, the try_to_munlock() logic works
-slightly differently. On encountering a VM_LOCKED non-linear vma that might
-map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking
-the page. munlock_vma_page() will just leave the page unlocked and let
-vmscan deal with it--the usual fallback position.
-
-Note that try_to_munlock()'s reverse map walk must visit every vma in a pages'
-reverse map to determine that a page is NOT mapped into any VM_LOCKED vma.
-However, the scan can terminate when it encounters a VM_LOCKED vma and can
-successfully acquire the vma's mmap semphore for read and mlock the page.
-Although try_to_munlock() can be called many [very many!] times when
-munlock()ing a large region or tearing down a large address space that has been
-mlocked via mlockall(), overall this is a fairly rare event.
-
-Mlocked Page: Page Reclaim in shrink_*_list()
-
-shrink_active_list() culls any obviously unevictable pages--i.e.,
-!page_evictable(page, NULL)--diverting these to the unevictable lru
-list. However, shrink_active_list() only sees unevictable pages that
-made it onto the active/inactive lru lists. Note that these pages do not
-have PageUnevictable set--otherwise, they would be on the unevictable list and
-shrink_active_list would never see them.
+If try_to_unmap() is unable to acquire a VM_LOCKED VMA's associated mmap
+semaphore, it will return SWAP_AGAIN. This will allow shrink_page_list() to
+recycle the page on the inactive list and hope that it has better luck with the
+page next time.
+
+For file pages mapped into non-linear VMAs, the try_to_munlock() logic works
+slightly differently. On encountering a VM_LOCKED non-linear VMA that might
+map the page, try_to_munlock() returns SWAP_AGAIN without actually mlocking the
+page. munlock_vma_page() will just leave the page unlocked and let vmscan deal
+with it - the usual fallback position.
+
+Note that try_to_munlock()'s reverse map walk must visit every VMA in a page's
+reverse map to determine that a page is NOT mapped into any VM_LOCKED VMA.
+However, the scan can terminate when it encounters a VM_LOCKED VMA and can
+successfully acquire the VMA's mmap semphore for read and mlock the page.
+Although try_to_munlock() might be called a great many times when munlocking a
+large region or tearing down a large address space that has been mlocked via
+mlockall(), overall this is a fairly rare event.
+
+
+PAGE RECLAIM IN shrink_*_list()
+-------------------------------
+
+shrink_active_list() culls any obviously unevictable pages - i.e.
+!page_evictable(page, NULL) - diverting these to the unevictable list.
+However, shrink_active_list() only sees unevictable pages that made it onto the
+active/inactive lru lists. Note that these pages do not have PageUnevictable
+set - otherwise they would be on the unevictable list and shrink_active_list
+would never see them.
Some examples of these unevictable pages on the LRU lists are:
-1) ramfs pages that have been placed on the lru lists when first allocated.
+ (1) ramfs pages that have been placed on the LRU lists when first allocated.
+
+ (2) SHM_LOCK'd shared memory pages. shmctl(SHM_LOCK) does not attempt to
+ allocate or fault in the pages in the shared memory region. This happens
+ when an application accesses the page the first time after SHM_LOCK'ing
+ the segment.
-2) SHM_LOCKed shared memory pages. shmctl(SHM_LOCK) does not attempt to
- allocate or fault in the pages in the shared memory region. This happens
- when an application accesses the page the first time after SHM_LOCKing
- the segment.
+ (3) mlocked pages that could not be isolated from the LRU and moved to the
+ unevictable list in mlock_vma_page().
-3) Mlocked pages that could not be isolated from the lru and moved to the
- unevictable list in mlock_vma_page().
+ (4) Pages mapped into multiple VM_LOCKED VMAs, but try_to_munlock() couldn't
+ acquire the VMA's mmap semaphore to test the flags and set PageMlocked.
+ munlock_vma_page() was forced to let the page back on to the normal LRU
+ list for vmscan to handle.
-3) Pages mapped into multiple VM_LOCKED vmas, but try_to_munlock() couldn't
- acquire the vma's mmap semaphore to test the flags and set PageMlocked.
- munlock_vma_page() was forced to let the page back on to the normal
- LRU list for vmscan to handle.
+shrink_inactive_list() also diverts any unevictable pages that it finds on the
+inactive lists to the appropriate zone's unevictable list.
-shrink_inactive_list() also culls any unevictable pages that it finds on
-the inactive lists, again diverting them to the appropriate zone's unevictable
-lru list. shrink_inactive_list() should only see SHM_LOCKed pages that became
-SHM_LOCKed after shrink_active_list() had moved them to the inactive list, or
-pages mapped into VM_LOCKED vmas that munlock_vma_page() couldn't isolate from
-the lru to recheck via try_to_munlock(). shrink_inactive_list() won't notice
-the latter, but will pass on to shrink_page_list().
+shrink_inactive_list() should only see SHM_LOCK'd pages that became SHM_LOCK'd
+after shrink_active_list() had moved them to the inactive list, or pages mapped
+into VM_LOCKED VMAs that munlock_vma_page() couldn't isolate from the LRU to
+recheck via try_to_munlock(). shrink_inactive_list() won't notice the latter,
+but will pass on to shrink_page_list().
shrink_page_list() again culls obviously unevictable pages that it could
encounter for similar reason to shrink_inactive_list(). Pages mapped into
-VM_LOCKED vmas but without PG_mlocked set will make it all the way to
+VM_LOCKED VMAs but without PG_mlocked set will make it all the way to
try_to_unmap(). shrink_page_list() will divert them to the unevictable list
when try_to_unmap() returns SWAP_MLOCK, as discussed above.
AMD MICROCODE UPDATE SUPPORT
P: Andreas Herrmann
-M: andeas.herrmann3@amd.com
+M: andreas.herrmann3@amd.com
L: amd64-microcode@amd64.org
S: Supported
F: arch/x86/kernel/microcode_amd.c
F: arch/arm/lib/floppydma.S
F: arch/arm/include/asm/floppy.h
+ARM PORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/
+
ARM PRIMECELL MMCI PL180/1 DRIVER
S: Orphan
F: drivers/mmc/host/mmci.*
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/CLKDEV SUPPORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+F: arch/arm/common/clkdev.c
+F: arch/arm/include/asm/clkdev.h
+
ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
P: Mike Rapoport
M: mike@compulab.co.il
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
+ARM/EBSA110 MACHINE SUPPORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/mach-ebsa110/
+F: drivers/net/arm/am79c961a.*
+
ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
P: Daniel Ribeiro
M: drwyrm@gmail.com
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/FOOTBRIDGE ARCHITECTURE
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/include/asm/hardware/dec21285.h
+F: arch/arm/mach-footbridge/
+
ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
P: Sascha Hauer
M: kernel@pengutronix.de
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+ARM/RISCPC ARCHITECTURE
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/common/time-acorn.c
+F: arch/arm/include/asm/hardware/entry-macro-iomd.S
+F: arch/arm/include/asm/hardware/ioc.h
+F: arch/arm/include/asm/hardware/iomd.h
+F: arch/arm/include/asm/hardware/memc.h
+F: arch/arm/mach-rpc/
+F: drivers/net/arm/ether*
+F: drivers/scsi/arm/
+
ARM/SHARK MACHINE SUPPORT
P: Alexander Schulz
M: alex@shark-linux.de
W: http://www.shark-linux.de/shark.html
S: Maintained
-ARM/STRONGARM110 PORT
-P: Russell King
-M: rmk@arm.linux.org.uk
-L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
-W: http://www.arm.linux.org.uk/
-S: Maintained
-
ARM/S3C2410 ARM ARCHITECTURE
P: Ben Dooks
M: ben-linux@fluff.org
W: http://www.mcuos.com
S: Maintained
+ARM/VFP SUPPORT
+P: Russell King
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
+W: http://www.arm.linux.org.uk/
+S: Maintained
+F: arch/arm/vfp/
+
ARPD SUPPORT
P: Jonathan Layes
L: netdev@vger.kernel.org
F: Documentation/video4linux/bttv/
F: drivers/media/video/bt8xx/bttv*
+CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
+P: David Howells
+M: dhowells@redhat.com
+L: linux-cachefs@redhat.com
+S: Supported
+F: Documentation/filesystems/caching/cachefiles.txt
+F: fs/cachefiles/
+
CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
P: Jonathan Corbet
M: corbet@lwn.net
W: http://www.ibm.com/developerworks/power/cell/
S: Supported
F: arch/powerpc/include/asm/cell*.h
-F: arch/powerpc/include/asm/lv1call.h
-F: arch/powerpc/include/asm/ps3*.h
F: arch/powerpc/include/asm/spu*.h
F: arch/powerpc/oprofile/*cell*
F: arch/powerpc/platforms/cell/
-F: arch/powerpc/platforms/ps3/
CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
P: David Vrabel
F: Documentation/input/cs461x.txt
F: sound/pci/cs46xx/
+CLK API
+P: Russell King
+M: linux@arm.linux.org.uk
+F: include/linux/clk.h
+
CODA FILE SYSTEM
P: Jan Harkes
M: jaharkes@cs.cmu.edu
CYBERPRO FB DRIVER
P: Russell King
-M: rmk@arm.linux.org.uk
+M: linux@arm.linux.org.uk
+L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
W: http://www.arm.linux.org.uk/
S: Maintained
F: drivers/video/cyber2000fb.*
EDAC-CORE
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Supported
F: Documentation/edac.txt
P: Doug Thompson
M: mark.gross@intel.com
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e752x_edac.c
EDAC-E7XXX
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/e7xxx_edac.c
EDAC-I82443BXGX
P: Tim Small
M: tim@buttersideup.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82443bxgx_edac.c
EDAC-I3000
P: Jason Uhlenkott
M: juhlenko@akamai.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i3000_edac.c
EDAC-I5000
P: Doug Thompson
M: dougthompson@xmission.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5000_edac.c
EDAC-I5400
P: Mauro Carvalho Chehab
M: mchehab@redhat.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5400_edac.c
P: Arvind R.
M: rdesikan@jetzbroadband.com
M: arvind@acarlab.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i82975x_edac.c
EDAC-PASEMI
P: Egor Martovetsky
M: egor@pasemi.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/pasemi_edac.c
EDAC-R82600
P: Tim Small
M: tim@buttersideup.com
-L: bluesmoke-devel@lists.sourceforge.net
+L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/r82600_edac.c
EMBEDDED LINUX
P: Paul Gortmaker
M: paul.gortmaker@windriver.com
+P: Matt Mackall
+M: mpm@selenic.com
P: David Woodhouse
M: dwmw2@infradead.org
L: linux-embedded@vger.kernel.org
F: include/linux/freezer.h
F: kernel/freezer.c
+FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
+P: David Howells
+M: dhowells@redhat.com
+L: linux-cachefs@redhat.com
+S: Supported
+F: Documentation/filesystems/caching/
+F: fs/fscache/
+F: include/linux/fscache*.h
+
FTRACE
P: Steven Rostedt
M: rostedt@goodmis.org
F: include/linux/suspend.h
F: include/linux/freezer.h
F: include/linux/pm.h
-F: include/asm-*/suspend*.h
F: arch/*/include/asm/suspend*.h
HID CORE LAYER
F: fs/hpfs/
HSO 3G MODEM DRIVER
-P: Denis Joseph Barrow
-M: d.barow@option.com
+P: Jan Dumon
+M: j.dumon@option.com
W: http://www.pharscape.org
S: Maintained
F: drivers/net/usb/hso.c
P: Bartlomiej Zolnierkiewicz
M: bzolnier@gmail.com
L: linux-ide@vger.kernel.org
-T: quilt kernel.org/pub/linux/kernel/people/bart/pata-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6.git
S: Maintained
F: Documentation/ide/
F: drivers/ide/
M: eduard.munteanu@linux360.ro
L: linux-kernel@vger.kernel.org
S: Maintained
-F: Documentation/vm/kmemtrace.txt
+F: Documentation/trace/kmemtrace.txt
F: include/trace/kmemtrace.h
F: kernel/trace/kmemtrace.c
S: Maintained
LINUX FOR POWERPC EMBEDDED MPC5XXX
-P: Sylvain Munaut
-M: tnt@246tNt.com
P: Grant Likely
M: grant.likely@secretlab.ca
L: linuxppc-dev@ozlabs.org
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC4XX
M: mporter@kernel.crashing.org
W: http://www.penguinppc.org/
L: linuxppc-dev@ozlabs.org
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
S: Maintained
LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
M: grant.likely@secretlab.ca
W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
L: linuxppc-dev@ozlabs.org
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC8XX
W: http://www.monstr.eu/fdt/
T: git git://git.monstr.eu/linux-2.6-microblaze.git
S: Supported
+F: arch/microblaze/
MICROTEK X6 SCANNER
P: Oliver Neukum
M: joel.becker@oracle.com
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
W: http://oss.oracle.com/projects/ocfs2/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
S: Supported
F: Documentation/filesystems/ocfs2.txt
F: Documentation/filesystems/dlmfs.txt
F: arch/powerpc/platforms/ps3/
F: drivers/*/ps3*
F: drivers/ps3/
+F: drivers/rtc/rtc-ps3.c
F: drivers/usb/host/*ps3.c
+F: sound/ppc/snd_ps3*
PS3VRAM DRIVER
P: Jim Paris
L: cbe-oss-dev@ozlabs.org
S: Maintained
+PTRACE SUPPORT
+P: Roland McGrath
+M: roland@redhat.com
+P: Oleg Nesterov
+M: oleg@redhat.com
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: include/asm-generic/syscall.h
+F: include/linux/ptrace.h
+F: include/linux/regset.h
+F: include/linux/tracehook.h
+F: kernel/ptrace.c
+
PVRUSB2 VIDEO4LINUX DRIVER
P: Mike Isely
M: isely@pobox.com
RDC R-321X SoC
P: Florian Fainelli
-M: florian.fainelli@telecomint.eu
+M: florian@openwrt.org
L: linux-kernel@vger.kernel.org
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
P: Florian Fainelli
-M: florian.fainelli@telecomint.eu
+M: florian@openwrt.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/r6040.c
F: Documentation/sgi-visws.txt
SGI XP/XPC/XPNET DRIVER
-P: Dean Nelson
-M: dcn@sgi.com
+P: Robin Holt
+M: holt@sgi.com
S: Maintained
F: drivers/misc/sgi-xp/
P: Takashi Iwai
M: tiwai@suse.de
L: alsa-devel@alsa-project.org (subscribers-only)
+W: http://www.alsa-project.org/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+T: git git://git.alsa-project.org/alsa-kernel.git
S: Maintained
+F: Documentation/sound/
+F: include/sound/
F: sound/
SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
W: http://www.linux-sh.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
S: Supported
+F: Documentation/sh/
F: arch/sh/
+F: drivers/sh/
SUSPEND TO RAM
P: Len Brown
F: include/linux/suspend.h
F: include/linux/freezer.h
F: include/linux/pm.h
-F: include/asm-*/suspend.h
SVGA HANDLING
P: Martin Mares
S: Maintained
F: arch/m68knommu/
-UCLINUX FOR RENESAS H8/300
+UCLINUX FOR RENESAS H8/300 (H8300)
P: Yoshinori Sato
M: ysato@users.sourceforge.jp
W: http://uclinux-h8.sourceforge.jp/
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
-EXTRAVERSION = -rc1
-NAME = Temporary Tasmanian Devil
+EXTRAVERSION = -rc5
+NAME = Vindictive Armadillo
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
- -e s/sh.*/sh/ )
+ -e s/sh[234].*/sh/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
SRCARCH := sparc
endif
+# Additional ARCH settings for sh
+ifeq ($(ARCH),sh64)
+ SRCARCH := sh
+endif
+
# Where to locate arch specific headers
hdr-arch := $(SRCARCH)
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
-MRPROPER_DIRS += include/config include2 usr/include
+MRPROPER_DIRS += include/config include2 usr/include include/generated
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/linux/autoconf.h include/linux/version.h \
include/linux/utsrelease.h \
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
- @echo ' prepare - Set up for building external modules'
+ @echo ' modules_prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
-clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
+ $(KBUILD_EXTMOD)/Module.markers \
+ $(KBUILD_EXTMOD)/modules.order
clean: $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
__asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
+#define __ASM_SMP_MB "\tmb\n"
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
+#define __ASM_SMP_MB
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ALPHA_FUTEX_H
+#define _ASM_ALPHA_FUTEX_H
-#include <asm-generic/futex.h>
+#ifdef __KERNEL__
-#endif
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/barrier.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ __ASM_SMP_MB \
+ "1: ldl_l %0,0(%2)\n" \
+ insn \
+ "2: stl_c %1,0(%2)\n" \
+ " beq %1,4f\n" \
+ " mov $31,%1\n" \
+ "3: .subsection 2\n" \
+ "4: br 1b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .long 1b-.\n" \
+ " lda $31,3b-1b(%1)\n" \
+ " .long 2b-.\n" \
+ " lda $31,3b-2b(%1)\n" \
+ " .previous\n" \
+ : "=&r" (oldval), "=&r"(ret) \
+ : "r" (uaddr), "r"(oparg) \
+ : "memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ int prev, cmp;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ __asm__ __volatile__ (
+ __ASM_SMP_MB
+ "1: ldl_l %0,0(%2)\n"
+ " cmpeq %0,%3,%1\n"
+ " beq %1,3f\n"
+ " mov %4,%1\n"
+ "2: stl_c %1,0(%2)\n"
+ " beq %1,4f\n"
+ "3: .subsection 2\n"
+ "4: br 1b\n"
+ " .previous\n"
+ " .section __ex_table,\"a\"\n"
+ " .long 1b-.\n"
+ " lda $31,3b-1b(%0)\n"
+ " .long 2b-.\n"
+ " lda $31,3b-2b(%0)\n"
+ " .previous\n"
+ : "=&r"(prev), "=&r"(cmp)
+ : "r"(uaddr), "r"((long)oldval), "r"(newval)
+ : "memory");
+
+ return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ALPHA_FUTEX_H */
#ifndef __ALPHA_PERCPU_H
#define __ALPHA_PERCPU_H
+
#include <linux/compiler.h>
#include <linux/threads.h>
+#include <linux/percpu-defs.h>
/*
* Determine the real variable name from the name visible in the
#endif /* SMP */
-#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name)
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
#endif /* __ALPHA_PERCPU_H */
(pc) + (_fixup)->fixup.bits.nextinsn; \
})
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
#endif /* __ALPHA_UACCESS_H */
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
irq_alpha.o signal.o setup.o ptrace.o time.o \
- alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
+ alpha_ksyms.o systbls.o err_common.o io.o
obj-$(CONFIG_VGA_HOSE) += console.o
obj-$(CONFIG_SMP) += smp.o
# Misc support
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
+ifdef CONFIG_BINFMT_AOUT
+obj-y += binfmt_loader.o
+endif
+
# Core logic support
obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o
static int __init init_loader_binfmt(void)
{
- return register_binfmt(&loader_format);
+ return insert_binfmt(&loader_format);
}
arch_initcall(init_loader_binfmt);
}
void
-ev6_machine_check(u64 vector, u64 la_ptr)
+ev6_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
}
void
-ev7_machine_check(u64 vector, u64 la_ptr)
+ev7_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
char *saved_err_prefix = err_print_prefix;
switch(header->type) {
case EL_TYPE__PAL__LOGOUT_FRAME:
- printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
+ printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
err_print_prefix,
packet->by_type.logout.whami,
packet->by_type.logout.rbox_whami);
ev7_collect_logout_frame_subpackets(struct el_subpacket *,
struct ev7_lf_subpackets *);
extern void ev7_register_error_handlers(void);
-extern void ev7_machine_check(u64, u64);
+extern void ev7_machine_check(unsigned long, unsigned long);
/*
* err_ev6.c
*/
extern void ev6_register_error_handlers(void);
extern int ev6_process_logout_frame(struct el_common *, int);
-extern void ev6_machine_check(u64, u64);
+extern void ev6_machine_check(unsigned long, unsigned long);
/*
* err_marvel.c
*/
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_register_error_handlers(void);
/*
* err_titan.c
*/
extern int titan_process_logout_frame(struct el_common *, int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_register_error_handlers(void);
extern int privateer_process_logout_frame(struct el_common *, int);
-extern void privateer_machine_check(u64, u64);
+extern void privateer_machine_check(unsigned long, unsigned long);
}
void
-marvel_machine_check(u64 vector, u64 la_ptr)
+marvel_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;
}
void
-titan_machine_check(u64 vector, u64 la_ptr)
+titan_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
}
void
-privateer_machine_check(u64 vector, u64 la_ptr)
+privateer_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
* the kernel global pointer and jump to the kernel entry-point.
*/
+#include <linux/init.h>
#include <asm/system.h>
#include <asm/asm-offsets.h>
-.section .text.head, "ax"
+__HEAD
.globl swapper_pg_dir
.globl _stext
swapper_pg_dir=SWAPPER_PGD
extern struct pci_ops irongate_pci_ops;
extern int irongate_pci_clr_err(void);
extern void irongate_init_arch(void);
-extern void irongate_machine_check(u64, u64);
#define irongate_pci_tbi ((void *)0)
/* core_lca.c */
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
extern void marvel_kill_arch(int);
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern int marvel_pa_to_nid(unsigned long);
extern int marvel_cpuid_to_nid(int);
extern struct pci_ops titan_pci_ops;
extern void titan_init_arch(void);
extern void titan_kill_arch(int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct _alpha_agp_info *titan_agp_info(void);
_text = .; /* Text and read-only data */
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
*/
#include <linux/module.h>
+#include <linux/sort.h>
#include <asm/uaccess.h>
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+ return (unsigned long)&x->insn + x->insn;
+}
+
+static void swap_ex(void *a, void *b, int size)
+{
+ struct exception_table_entry *ex_a = a, *ex_b = b;
+ unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
+ unsigned int t = ex_a->fixup.unit;
+
+ ex_a->fixup.unit = ex_b->fixup.unit;
+ ex_b->fixup.unit = t;
+ ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
+ ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
+}
+
+/*
+ * The exception table needs to be sorted so that the binary
+ * search that we use to find entries in it works properly.
+ * This is used both for the kernel exception table and for
+ * the exception tables of modules that get loaded.
+ */
+static int cmp_ex(const void *a, const void *b)
+{
+ const struct exception_table_entry *x = a, *y = b;
+
+ /* avoid overflow */
+ if (ex_to_addr(x) > ex_to_addr(y))
+ return 1;
+ if (ex_to_addr(x) < ex_to_addr(y))
+ return -1;
+ return 0;
+}
+
void sort_extable(struct exception_table_entry *start,
struct exception_table_entry *finish)
{
+ sort(start, finish - start, sizeof(struct exception_table_entry),
+ cmp_ex, swap_ex);
}
const struct exception_table_entry *
unsigned long mid_value;
mid = (last - first) / 2 + first;
- mid_value = (unsigned long)&mid->insn + mid->insn;
+ mid_value = ex_to_addr(mid);
if (mid_value == value)
return mid;
else if (mid_value < value)
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
help
Support for Freescale MXC/iMX-based family of processors
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
+ select HAVE_IDE
+ select COMMON_CLKDEV
help
Support for TI's DaVinci platform.
source "arch/arm/Kconfig-nommu"
endif
+config ARM_ERRATA_411920
+ bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+ depends on CPU_V6 && !SMP
+ help
+ Invalidation of the Instruction Cache operation can
+ fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+ It does not affect the MPCore. This option enables the ARM Ltd.
+ recommended workaround.
+
+config ARM_ERRATA_430973
+ bool "ARM errata: Stale prediction on replaced interworking branch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 430973 Cortex-A8
+ (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+ interworking branch is replaced with another code sequence at the
+ same virtual address, whether due to self-modifying code or virtual
+ to physical address re-mapping, Cortex-A8 does not recover from the
+ stale interworking branch prediction. This results in Cortex-A8
+ executing the new code sequence in the incorrect ARM or Thumb state.
+ The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+ and also flushes the branch target cache at every context switch.
+ Note that setting specific bits in the ACTLR register may not be
+ available in non-secure mode.
+
+config ARM_ERRATA_458693
+ bool "ARM errata: Processor deadlock when a false hazard is created"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+ erratum. For very specific sequences of memory operations, it is
+ possible for a hazard condition intended for a cache line to instead
+ be incorrectly associated with a different cache line. This false
+ hazard might then cause a processor deadlock. The workaround enables
+ the L1 caching of the NEON accesses and disables the PLD instruction
+ in the ACTLR register. Note that setting specific bits in the ACTLR
+ register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+ bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+ erratum. Any asynchronous access to the L2 cache may encounter a
+ situation in which recent store transactions to the L2 cache are lost
+ and overwritten with stale memory contents from external memory. The
+ workaround disables the write-allocate mode for the L2 cache via the
+ ACTLR register. Note that setting specific bits in the ACTLR register
+ may not be available in non-secure mode.
+
endmenu
source "arch/arm/common/Kconfig"
If in doubt, say N.
-config CPU_FREQ_PXA
- bool
- depends on CPU_FREQ && ARCH_PXA && PXA25x
- default y
- select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
endif
source "drivers/cpuidle/Kconfig"
writel(32, base + VIC_PL190_DEF_VECT_ADDR);
for (i = 0; i < 32; i++) {
- unsigned int irq = irq_start + i;
-
- set_irq_chip(irq, &vic_chip);
- set_irq_chip_data(irq, base);
-
if (vic_sources & (1 << i)) {
+ unsigned int irq = irq_start + i;
+
+ set_irq_chip(irq, &vic_chip);
+ set_irq_chip_data(irq, base);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
--- /dev/null
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 15 08:16:53 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+CONFIG_ARCH_DAVINCI_DM644x=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_DAVINCI_MUX=y
+CONFIG_DAVINCI_MUX_DEBUG=y
+CONFIG_DAVINCI_MUX_WARNINGS=y
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_DAVINCI=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=m
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+CONFIG_BLK_DEV_PALMCHIP_BK3710=m
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_DAVINCI_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# DaVinci 35x and 644x USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:29:34 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-CONFIG_DEFAULT_NOOP=y
-CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX2=y
-# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
-CONFIG_MACH_MX27=y
-
-#
-# MX2 Platforms
-#
-CONFIG_MACH_MX27ADS=y
-# CONFIG_MACH_PCM038 is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-# CONFIG_VFP is not set
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-# CONFIG_MII is not set
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_FEC_OLD is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_IMX is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-CONFIG_NLS_ISO8859_15=m
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc5
-# Tue Mar 3 21:45:57 2009
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 11:58:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 02:57:32 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:22:12 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Marvell MV78xx0 Implementations
#
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
#
# Bus support
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:21:11 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr 8 11:11:33 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+CONFIG_ARCH_MX1ADS=y
#
# Freescale MXC Implementations
#
+CONFIG_ARCH_MX1=y
# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MX3 is not set
#
-# MX3 Options
+# MX1 platforms:
#
-CONFIG_MACH_MX31ADS=y
-# CONFIG_MACH_PCM037 is not set
+CONFIG_MACH_MXLADS=y
+CONFIG_MACH_SCB9328=y
+CONFIG_MXC_IRQ_PRIOR=y
+# CONFIG_MXC_PWM is not set
#
# Processor Type
#
CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_ARM920T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_ARM_THUMB=y
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_OUTER_CACHE is not set
#
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
-CONFIG_VFP=y
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
-# CONFIG_DM9000 is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
#
# SPI GPIO expanders:
#
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# Sound
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+CONFIG_USB_GADGET_IMX=y
+CONFIG_USB_IMX=y
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
#
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
#
# Kernel hacking
#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Block modes
#
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
-# CONFIG_CRYPTO_HW is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Fri Jun 20 16:38:36 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr 8 10:18:06 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_EXTRA_PASS=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
#
+# CONFIG_ARCH_MX1 is not set
CONFIG_ARCH_MX2=y
# CONFIG_ARCH_MX3 is not set
-
-#
-# MX2 family CPU support
-#
+# CONFIG_MACH_MX21 is not set
CONFIG_MACH_MX27=y
#
-# MX2 Platforms
+# MX2 platforms:
#
-# CONFIG_MACH_MX27ADS is not set
+CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
#
# Processor Type
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
+CONFIG_FPE_NWFPE=y
+CONFIG_FPE_NWFPE_XP=y
+# CONFIG_FPE_FASTFPE is not set
# CONFIG_VFP is not set
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x00000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
-CONFIG_FEC_OLD=y
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=y
+# CONFIG_SPI_GPIO is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+#
+# PCI GPIO expanders:
+#
+
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
-# CONFIG_W1 is not set
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L1=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
# CONFIG_SOC_CAMERA is not set
# CONFIG_RADIO_ADAPTERS is not set
# CONFIG_DAB is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
#
# Frame buffer hardware drivers
#
+CONFIG_FB_IMX=y
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_NEW_LEDS is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 24 11:41:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
-CONFIG_MACH_MX31MOBOARD=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 14:23:39 2008
+# Linux kernel version: 2.6.30-rc1
+# Wed Apr 8 11:06:37 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
-# CONFIG_GENERIC_TIME is not set
-# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
# CONFIG_NO_IOPORT is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
CONFIG_ARCH_MXC=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Freescale MXC Implementations
#
+# CONFIG_ARCH_MX1 is not set
+# CONFIG_ARCH_MX2 is not set
CONFIG_ARCH_MX3=y
+CONFIG_ARCH_MX31=y
#
-# MX3 Options
+# MX3 platforms:
#
-# CONFIG_MACH_MX31ADS is not set
+CONFIG_MACH_MX31ADS=y
+CONFIG_MACH_MX31ADS_WM1133_EV1=y
+CONFIG_MACH_PCM037=y
CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MXC_PWM=y
#
# Processor Type
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_COMMON_CLKDEV=y
#
# Bus support
#
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_PCCARD=m
-# CONFIG_PCMCIA_DEBUG is not set
-# CONFIG_PCMCIA is not set
-
-#
-# PC-card bridges
-#
+# CONFIG_PCCARD is not set
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
-# CONFIG_NO_IDLE_HZ is not set
CONFIG_HZ=100
CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_OABI_COMPAT=y
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
CONFIG_VFP=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
-CONFIG_BINFMT_AOUT=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
CONFIG_PM=y
-# CONFIG_PM_DEBUG is not set
-# CONFIG_SUSPEND is not set
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
+# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
-CONFIG_MTD_RAM=y
+# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_VERIFY_WRITE is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
-# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_DEBUG is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+CONFIG_CS89x0=y
+CONFIG_CS89x0_NONISA_IRQ=y
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
-# USB Network Adapters
+# Enable WiMAX (Networking options) to see the WiMAX drivers
#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# Character devices
#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Non-8250 serial port support
#
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_IMX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
#
-# Watchdog Device Drivers
+# Memory mapped GPIO expanders:
#
-# CONFIG_SOFT_WATCHDOG is not set
#
-# USB-based Watchdog Cards
+# I2C GPIO expanders:
#
-# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
#
-# Sonics Silicon Backplane
+# PCI GPIO expanders:
#
+
+#
+# SPI GPIO expanders:
+#
+CONFIG_W1=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2482 is not set
+CONFIG_W1_MASTER_MXC=y
+# CONFIG_W1_MASTER_GPIO is not set
+
+#
+# 1-wire Slaves
+#
+CONFIG_W1_SLAVE_THERM=y
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+CONFIG_MFD_WM8350=y
+CONFIG_MFD_WM8350_CONFIG_MODE_0=y
+CONFIG_MFD_WM8352_CONFIG_MODE_0=y
+CONFIG_MFD_WM8350_I2C=y
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
-CONFIG_VIDEO_ALLOW_V4L1=y
+# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
CONFIG_VIDEO_V4L2=y
-CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_CONTIG=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-CONFIG_V4L_USB_DRIVERS=y
-# CONFIG_USB_VICAM is not set
-# CONFIG_USB_IBMCAM is not set
-# CONFIG_USB_KONICAWC is not set
-# CONFIG_USB_QUICKCAM_MESSENGER is not set
-# CONFIG_USB_ET61X251 is not set
-# CONFIG_USB_OV511 is not set
-# CONFIG_USB_SE401 is not set
-# CONFIG_USB_SN9C102 is not set
-# CONFIG_USB_STV680 is not set
-# CONFIG_USB_ZC0301 is not set
-# CONFIG_USB_PWC is not set
-# CONFIG_USB_ZR364XX is not set
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+CONFIG_SOC_CAMERA=y
+CONFIG_SOC_CAMERA_MT9M001=y
+CONFIG_SOC_CAMERA_MT9M111=y
+CONFIG_SOC_CAMERA_MT9T031=y
+CONFIG_SOC_CAMERA_MT9V022=y
+CONFIG_SOC_CAMERA_TW9910=y
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_MX3=y
+# CONFIG_RADIO_ADAPTERS is not set
+# CONFIG_DAB is not set
#
# Graphics support
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
#
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+CONFIG_FB_MX3=y
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_LOGO_LINUX_CLUT224=y
-
-#
-# Sound
-#
+# CONFIG_LOGO is not set
# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
#
-# Miscellaneous USB options
+# MMC/SD/SDIO Card Drivers
#
-# CONFIG_USB_DEVICEFS is not set
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
-# USB Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
#
-# CONFIG_USB_C67X00_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-# CONFIG_USB_STORAGE is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+# CONFIG_MMC_SDHCI is not set
+CONFIG_MMC_MXC=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_NEW_LEDS is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+CONFIG_DMADEVICES=y
#
-# USB port drivers
+# DMA Devices
#
-# CONFIG_USB_SERIAL is not set
+CONFIG_MX3_IPU=y
+CONFIG_MX3_IPU_IRQS=4
+CONFIG_DMA_ENGINE=y
#
-# USB Miscellaneous drivers
+# DMA Clients
#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+CONFIG_REGULATOR_WM8350=y
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
#
# Kernel hacking
#
-CONFIG_PRINTK_TIME=y
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_PREEMPT=y
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_PROVE_LOCKING is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_FAULT_INJECTION is not set
+# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
# CONFIG_DEBUG_USER is not set
-CONFIG_DEBUG_ERRORS=y
-# CONFIG_DEBUG_STACK_USAGE is not set
-CONFIG_DEBUG_LL=y
-# CONFIG_DEBUG_ICEDCC is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
-# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Block modes
#
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-CONFIG_CRC_CCITT=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Fri Aug 22 12:38:51 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:07:25 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Orion Implementations
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
CONFIG_MACH_RD88F6183AP_GE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc8
-# Mon Jul 7 16:59:23 2008
+# Linux kernel version: 2.6.30-rc2
#
CONFIG_ARM=y
+CONFIG_HAVE_PWM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
# CONFIG_GENERIC_TIME is not set
CONFIG_NO_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_HARDIRQS_SW_RESEND=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=m
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
#
# System Type
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
# CONFIG_ARCH_KS8695 is not set
# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
# CONFIG_ARCH_MXC is not set
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
CONFIG_ARCH_S3C2410=y
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
CONFIG_PLAT_S3C24XX=y
+CONFIG_S3C2410_CLOCK=y
+CONFIG_S3C24XX_DCLK=y
CONFIG_CPU_S3C244X=y
-# CONFIG_S3C24XX_PWM is not set
+CONFIG_S3C24XX_PWM=y
+CONFIG_S3C24XX_GPIO_EXTRA=128
+CONFIG_S3C24XX_GPIO_EXTRA64=y
+CONFIG_S3C24XX_GPIO_EXTRA128=y
CONFIG_PM_SIMTEC=y
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
+CONFIG_S3C24XX_ADC=y
CONFIG_MACH_SMDK=y
CONFIG_PLAT_S3C=y
CONFIG_CPU_LLSERIAL_S3C2410=y
# Boot options
#
# CONFIG_S3C_BOOT_WATCHDOG is not set
-# CONFIG_S3C_BOOT_ERROR_RESET is not set
+CONFIG_S3C_BOOT_ERROR_RESET=y
+CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
#
# Power management
# CONFIG_S3C2410_PM_DEBUG is not set
# CONFIG_S3C2410_PM_CHECK is not set
CONFIG_S3C_LOWLEVEL_UART_PORT=0
+CONFIG_S3C_GPIO_SPACE=0
+CONFIG_S3C_DEV_HSMMC=y
#
# S3C2400 Machines
CONFIG_CPU_S3C2410_DMA=y
CONFIG_S3C2410_PM=y
CONFIG_S3C2410_GPIO=y
-CONFIG_S3C2410_CLOCK=y
CONFIG_SIMTEC_NOR=y
CONFIG_MACH_BAST_IDE=y
CONFIG_MACH_OTOM=y
CONFIG_MACH_AML_M5900=y
CONFIG_BAST_PC104_IRQ=y
-# CONFIG_MACH_TCT_HAMMER is not set
+CONFIG_MACH_TCT_HAMMER=y
CONFIG_MACH_VR1000=y
CONFIG_MACH_QT2410=y
CONFIG_CPU_S3C2412=y
#
# S3C2412 Machines
#
-# CONFIG_MACH_JIVE is not set
+CONFIG_MACH_JIVE=y
+# CONFIG_MACH_JIVE_SHOW_BOOTLOADER is not set
CONFIG_MACH_SMDK2413=y
CONFIG_MACH_S3C2413=y
-# CONFIG_MACH_SMDK2412 is not set
+CONFIG_MACH_SMDK2412=y
CONFIG_MACH_VSTMS=y
CONFIG_CPU_S3C2440=y
CONFIG_S3C2440_DMA=y
CONFIG_ARCH_S3C2440=y
CONFIG_MACH_NEXCODER_2440=y
CONFIG_SMDK2440_CPU2440=y
-# CONFIG_MACH_AT2440EVB is not set
+CONFIG_MACH_AT2440EVB=y
CONFIG_CPU_S3C2442=y
#
#
# Kernel Features
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_PREEMPT is not set
CONFIG_HZ=200
# CONFIG_AEABI is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
# CONFIG_XIP_KERNEL is not set
# CONFIG_KEXEC is not set
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
#
# Floating point emulation
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
CONFIG_BINFMT_AOUT=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
CONFIG_SUSPEND_FREEZER=y
CONFIG_APM_EMULATION=m
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
+CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=m
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+# CONFIG_IP_VS_IPV6 is not set
+# CONFIG_IP_VS_DEBUG is not set
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+# CONFIG_IP_VS_PROTO_TCP is not set
+# CONFIG_IP_VS_PROTO_UDP is not set
+# CONFIG_IP_VS_PROTO_ESP is not set
+# CONFIG_IP_VS_PROTO_AH is not set
+
+#
+# IPVS scheduler
+#
+# CONFIG_IP_VS_RR is not set
+# CONFIG_IP_VS_WRR is not set
+# CONFIG_IP_VS_LC is not set
+# CONFIG_IP_VS_WLC is not set
+# CONFIG_IP_VS_LBLC is not set
+# CONFIG_IP_VS_LBLCR is not set
+# CONFIG_IP_VS_DH is not set
+# CONFIG_IP_VS_SH is not set
+# CONFIG_IP_VS_SED is not set
+# CONFIG_IP_VS_NQ is not set
+
+#
+# IPVS application helper
+#
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_SCH_FIFO=y
+CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-CONFIG_BT_HCIUSB_SCO=y
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_16=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
-CONFIG_MTD_BAST=y
-CONFIG_MTD_BAST_MAXSIZE=4
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
CONFIG_MTD_NAND_S3C2410=y
# CONFIG_MTD_NAND_S3C2410_DEBUG is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
-# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+CONFIG_EEPROM_AT25=m
+CONFIG_EEPROM_LEGACY=m
+CONFIG_EEPROM_93CX6=m
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
-CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=y
-# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
-CONFIG_BLK_DEV_IDEFLOPPY=m
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
-# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_PLATFORM=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_BLK_DEV_HD is not set
#
# SCSI device support
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_HAVE_PATA_PLATFORM=y
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
CONFIG_DM9000=y
-# CONFIG_ENC28J60 is not set
CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
-# CONFIG_E1000E_ENABLED is not set
CONFIG_NETDEV_10000=y
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
# Input device support
#
CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_POLLDEV is not set
#
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=m
+CONFIG_MOUSE_BCM5974=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_GPIO is not set
-# CONFIG_INPUT_JOYSTICK is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_JOYSTICK_ANALOG=m
+CONFIG_JOYSTICK_A3D=m
+CONFIG_JOYSTICK_ADI=m
+CONFIG_JOYSTICK_COBRA=m
+CONFIG_JOYSTICK_GF2K=m
+CONFIG_JOYSTICK_GRIP=m
+CONFIG_JOYSTICK_GRIP_MP=m
+CONFIG_JOYSTICK_GUILLEMOT=m
+CONFIG_JOYSTICK_INTERACT=m
+CONFIG_JOYSTICK_SIDEWINDER=m
+CONFIG_JOYSTICK_TMDC=m
+CONFIG_JOYSTICK_IFORCE=m
+# CONFIG_JOYSTICK_IFORCE_USB is not set
+# CONFIG_JOYSTICK_IFORCE_232 is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+CONFIG_JOYSTICK_MAGELLAN=m
+CONFIG_JOYSTICK_SPACEORB=m
+CONFIG_JOYSTICK_SPACEBALL=m
+CONFIG_JOYSTICK_STINGER=m
+CONFIG_JOYSTICK_TWIDJOY=m
+CONFIG_JOYSTICK_ZHENHUA=m
+CONFIG_JOYSTICK_DB9=m
+CONFIG_JOYSTICK_GAMECON=m
+CONFIG_JOYSTICK_TURBOGRAFX=m
+CONFIG_JOYSTICK_JOYDUMP=m
+CONFIG_JOYSTICK_XPAD=m
+CONFIG_JOYSTICK_XPAD_FF=y
+CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_HTCPEN is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+CONFIG_TOUCHSCREEN_USB_COMPOSITE=m
+CONFIG_TOUCHSCREEN_USB_EGALAX=y
+CONFIG_TOUCHSCREEN_USB_PANJIT=y
+CONFIG_TOUCHSCREEN_USB_3M=y
+CONFIG_TOUCHSCREEN_USB_ITM=y
+CONFIG_TOUCHSCREEN_USB_ETURBO=y
+CONFIG_TOUCHSCREEN_USB_GUNZE=y
+CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y
+CONFIG_TOUCHSCREEN_USB_IRTOUCH=y
+CONFIG_TOUCHSCREEN_USB_IDEALTEK=y
+CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y
+CONFIG_TOUCHSCREEN_USB_GOTOP=y
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_ATI_REMOTE=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
#
# Hardware I/O ports
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
-# CONFIG_GAMEPORT is not set
+CONFIG_GAMEPORT=m
+# CONFIG_GAMEPORT_NS558 is not set
+# CONFIG_GAMEPORT_L4 is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# Non-8250 serial port support
#
CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_UARTS=4
# CONFIG_SERIAL_SAMSUNG_DEBUG is not set
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_SERIAL_S3C2410=y
CONFIG_SERIAL_S3C2412=y
CONFIG_SERIAL_S3C2440=y
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
CONFIG_PPDEV=y
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y
#
# I2C Hardware Bus support
#
-# CONFIG_I2C_ELEKTOR is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
# CONFIG_I2C_GPIO is not set
# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIMTEC=y
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_PCA_ISA is not set
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-CONFIG_EEPROM_LEGACY=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
+CONFIG_SPI_GPIO=m
# CONFIG_SPI_LM70_LLP is not set
CONFIG_SPI_S3C24XX=m
CONFIG_SPI_S3C24XX_GPIO=m
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPI_TLE62X0=m
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
#
-# GPIO Support
+# Memory mapped GPIO expanders:
#
-# CONFIG_DEBUG_GPIO is not set
#
# I2C GPIO expanders:
#
+# CONFIG_GPIO_MAX732X is not set
# CONFIG_GPIO_PCA953X is not set
# CONFIG_GPIO_PCF857X is not set
+#
+# PCI GPIO expanders:
+#
+
#
# SPI GPIO expanders:
#
+# CONFIG_GPIO_MAX7301 is not set
# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
CONFIG_MFD_SM501=y
+# CONFIG_MFD_SM501_GPIO is not set
# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
#
# Multimedia core support
#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
+CONFIG_VIDEO_DEV=m
+CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+CONFIG_DVB_CORE=m
+CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_MEDIA_ATTACH=y
+CONFIG_MEDIA_TUNER=m
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=m
+CONFIG_MEDIA_TUNER_TDA8290=m
+CONFIG_MEDIA_TUNER_TDA827X=m
+CONFIG_MEDIA_TUNER_TDA18271=m
+CONFIG_MEDIA_TUNER_TDA9887=m
+CONFIG_MEDIA_TUNER_TEA5761=m
+CONFIG_MEDIA_TUNER_TEA5767=m
+CONFIG_MEDIA_TUNER_MT20XX=m
+CONFIG_MEDIA_TUNER_MT2060=m
+CONFIG_MEDIA_TUNER_MT2266=m
+CONFIG_MEDIA_TUNER_QT1010=m
+CONFIG_MEDIA_TUNER_XC2028=m
+CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MXL5005S=m
+CONFIG_MEDIA_TUNER_MXL5007T=m
+CONFIG_MEDIA_TUNER_MC44S803=m
+CONFIG_VIDEO_V4L2=m
+CONFIG_VIDEO_V4L1=m
+CONFIG_VIDEOBUF_GEN=m
+CONFIG_VIDEOBUF_VMALLOC=m
+CONFIG_VIDEO_TVEEPROM=m
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+CONFIG_VIDEO_VIVI=m
+CONFIG_VIDEO_PMS=m
+CONFIG_VIDEO_BWQCAM=m
+CONFIG_VIDEO_CQCAM=m
+CONFIG_VIDEO_W9966=m
+CONFIG_VIDEO_CPIA=m
+CONFIG_VIDEO_CPIA_PP=m
+CONFIG_VIDEO_CPIA_USB=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_SAA5246A=m
+CONFIG_VIDEO_SAA5249=m
+CONFIG_VIDEO_AU0828=m
+# CONFIG_SOC_CAMERA is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_USB_VIDEO_CLASS is not set
+CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
+CONFIG_USB_GSPCA=m
+# CONFIG_USB_M5602 is not set
+# CONFIG_USB_STV06XX is not set
+# CONFIG_USB_GSPCA_CONEX is not set
+# CONFIG_USB_GSPCA_ETOMS is not set
+# CONFIG_USB_GSPCA_FINEPIX is not set
+# CONFIG_USB_GSPCA_MARS is not set
+# CONFIG_USB_GSPCA_MR97310A is not set
+# CONFIG_USB_GSPCA_OV519 is not set
+# CONFIG_USB_GSPCA_OV534 is not set
+# CONFIG_USB_GSPCA_PAC207 is not set
+# CONFIG_USB_GSPCA_PAC7311 is not set
+# CONFIG_USB_GSPCA_SONIXB is not set
+# CONFIG_USB_GSPCA_SONIXJ is not set
+# CONFIG_USB_GSPCA_SPCA500 is not set
+# CONFIG_USB_GSPCA_SPCA501 is not set
+# CONFIG_USB_GSPCA_SPCA505 is not set
+# CONFIG_USB_GSPCA_SPCA506 is not set
+# CONFIG_USB_GSPCA_SPCA508 is not set
+# CONFIG_USB_GSPCA_SPCA561 is not set
+# CONFIG_USB_GSPCA_SQ905 is not set
+# CONFIG_USB_GSPCA_SQ905C is not set
+# CONFIG_USB_GSPCA_STK014 is not set
+# CONFIG_USB_GSPCA_SUNPLUS is not set
+# CONFIG_USB_GSPCA_T613 is not set
+# CONFIG_USB_GSPCA_TV8532 is not set
+# CONFIG_USB_GSPCA_VC032X is not set
+# CONFIG_USB_GSPCA_ZC3XX is not set
+# CONFIG_VIDEO_PVRUSB2 is not set
+# CONFIG_VIDEO_HDPVR is not set
+# CONFIG_VIDEO_EM28XX is not set
+# CONFIG_VIDEO_CX231XX is not set
+# CONFIG_VIDEO_USBVISION is not set
+# CONFIG_USB_VICAM is not set
+# CONFIG_USB_IBMCAM is not set
+# CONFIG_USB_KONICAWC is not set
+# CONFIG_USB_QUICKCAM_MESSENGER is not set
+# CONFIG_USB_ET61X251 is not set
+# CONFIG_VIDEO_OVCAMCHIP is not set
+# CONFIG_USB_OV511 is not set
+# CONFIG_USB_SE401 is not set
+# CONFIG_USB_SN9C102 is not set
+# CONFIG_USB_STV680 is not set
+# CONFIG_USB_ZC0301 is not set
+# CONFIG_USB_PWC is not set
+CONFIG_USB_PWC_INPUT_EVDEV=y
+# CONFIG_USB_ZR364XX is not set
+# CONFIG_USB_STKWEBCAM is not set
+# CONFIG_USB_S2255 is not set
+CONFIG_RADIO_ADAPTERS=y
+CONFIG_RADIO_CADET=m
+CONFIG_RADIO_RTRACK=m
+CONFIG_RADIO_RTRACK2=m
+CONFIG_RADIO_AZTECH=m
+CONFIG_RADIO_GEMTEK=m
+CONFIG_RADIO_SF16FMI=m
+CONFIG_RADIO_SF16FMR2=m
+CONFIG_RADIO_TERRATEC=m
+CONFIG_RADIO_TRUST=m
+CONFIG_RADIO_TYPHOON=m
+CONFIG_RADIO_TYPHOON_PROC_FS=y
+CONFIG_RADIO_ZOLTRIX=m
+CONFIG_USB_DSBR=m
+CONFIG_USB_SI470X=m
+CONFIG_USB_MR800=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_DVB_CAPTURE_DRIVERS=y
+# CONFIG_TTPCI_EEPROM is not set
+
+#
+# Supported USB Adapters
+#
+CONFIG_DVB_USB=m
+# CONFIG_DVB_USB_DEBUG is not set
+# CONFIG_DVB_USB_A800 is not set
+CONFIG_DVB_USB_DIBUSB_MB=m
+# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+# CONFIG_DVB_USB_GL861 is not set
+# CONFIG_DVB_USB_AU6610 is not set
+# CONFIG_DVB_USB_DIGITV is not set
+# CONFIG_DVB_USB_VP7045 is not set
+# CONFIG_DVB_USB_VP702X is not set
+# CONFIG_DVB_USB_GP8PSK is not set
+# CONFIG_DVB_USB_NOVA_T_USB2 is not set
+# CONFIG_DVB_USB_TTUSB2 is not set
+# CONFIG_DVB_USB_DTT200U is not set
+# CONFIG_DVB_USB_OPERA1 is not set
+CONFIG_DVB_USB_AF9005=m
+# CONFIG_DVB_USB_AF9005_REMOTE is not set
+# CONFIG_DVB_USB_DW2102 is not set
+# CONFIG_DVB_USB_CINERGY_T2 is not set
+# CONFIG_DVB_USB_ANYSEE is not set
+# CONFIG_DVB_USB_DTV5100 is not set
+# CONFIG_DVB_USB_AF9015 is not set
+# CONFIG_DVB_USB_CE6230 is not set
+# CONFIG_DVB_SIANO_SMS1XXX is not set
+
+#
+# Supported FlexCopII (B2C2) Adapters
+#
+# CONFIG_DVB_B2C2_FLEXCOP is not set
+
+#
+# Supported DVB Frontends
+#
+# CONFIG_DVB_FE_CUSTOMISE is not set
+CONFIG_DVB_CX22702=m
+CONFIG_DVB_TDA1004X=m
+CONFIG_DVB_MT352=m
+CONFIG_DVB_ZL10353=m
+CONFIG_DVB_DIB3000MB=m
+CONFIG_DVB_DIB3000MC=m
+CONFIG_DVB_DIB7000M=m
+CONFIG_DVB_DIB7000P=m
+CONFIG_DVB_LGDT330X=m
+CONFIG_DVB_LGDT3305=m
+CONFIG_DVB_AU8522=m
+CONFIG_DVB_S5H1411=m
+CONFIG_DVB_PLL=m
+CONFIG_DVB_TUNER_DIB0070=m
+CONFIG_DVB_LGS8GL5=m
+CONFIG_DAB=y
+CONFIG_USB_DABUSB=m
#
# Graphics support
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_S3C2410_DEBUG is not set
CONFIG_FB_SM501=y
# CONFIG_FB_VIRTUAL is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
#
# Display device support
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=m
+CONFIG_SND_RAWMIDI=m
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_USB_CAIAQ=m
+# CONFIG_SND_USB_CAIAQ_INPUT is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_AC97_BUS=y
+CONFIG_SND_S3C24XX_SOC=y
+CONFIG_SND_S3C24XX_SOC_I2S=m
+CONFIG_SND_S3C_I2SV2_SOC=m
+CONFIG_SND_S3C2412_SOC_I2S=m
+CONFIG_SND_S3C2443_SOC_AC97=m
+CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m
+CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m
+CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m
+CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X=m
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_AC97_CODEC=m
+CONFIG_SND_SOC_L3=m
+CONFIG_SND_SOC_UDA134X=m
+CONFIG_SND_SOC_WM8750=m
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# USB Input Devices
#
# CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
#
-# USB HID Boot Protocol drivers
+# Special HID drivers
#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
+CONFIG_HID_APPLE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_ONETOUCH=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
+CONFIG_USB_MDC800=m
+CONFIG_USB_MICROTEK=m
#
# USB port drivers
#
-# CONFIG_USB_USS720 is not set
+CONFIG_USB_USS720=m
CONFIG_USB_SERIAL=y
# CONFIG_USB_SERIAL_CONSOLE is not set
# CONFIG_USB_EZUSB is not set
CONFIG_USB_SERIAL_GENERIC=y
# CONFIG_USB_SERIAL_AIRCABLE is not set
-# CONFIG_USB_SERIAL_AIRPRIME is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=y
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# USB Miscellaneous drivers
#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_ADUTUX=m
+CONFIG_USB_SEVSEG=m
+CONFIG_USB_RIO500=m
+CONFIG_USB_LEGOTOWER=m
+CONFIG_USB_LCD=m
+CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_CYTHERM=m
+CONFIG_USB_IDMOUSE=m
+CONFIG_USB_FTDI_ELAN=m
+CONFIG_USB_APPLEDISPLAY=m
CONFIG_USB_LD=m
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TRANCEVIBRATOR=m
+CONFIG_USB_IOWARRIOR=m
+CONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
-# CONFIG_MMC is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=m
+CONFIG_MMC_TEST=m
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=m
+CONFIG_MMC_SPI=m
+CONFIG_MMC_S3C=y
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
CONFIG_LEDS_S3C24XX=m
CONFIG_LEDS_H1940=m
-# CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_PCA9532=m
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_PWM=m
+CONFIG_LEDS_BD2802=m
#
# LED Triggers
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_S3C=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+CONFIG_JBD2=m
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=m
+CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Digest
#
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
#
# Floating point emulation
#define EF_ARM_HASENTRY 0x00000002 /* All */
#define EF_ARM_RELEXEC 0x00000001 /* All */
-#define R_ARM_NONE 0
-#define R_ARM_PC24 1
-#define R_ARM_ABS32 2
-#define R_ARM_CALL 28
-#define R_ARM_JUMP24 29
-#define R_ARM_V4BX 40
-#define R_ARM_PREL31 42
+#define R_ARM_NONE 0
+#define R_ARM_PC24 1
+#define R_ARM_ABS32 2
+#define R_ARM_CALL 28
+#define R_ARM_JUMP24 29
+#define R_ARM_V4BX 40
+#define R_ARM_PREL31 42
+#define R_ARM_MOVW_ABS_NC 43
+#define R_ARM_MOVT_ABS 44
/*
* These are used to set parameters in the core dumps.
struct mmu_gather {
struct mm_struct *mm;
unsigned int fullmm;
+ unsigned long range_start;
+ unsigned long range_end;
};
DECLARE_PER_CPU(struct mmu_gather, mmu_gathers);
put_cpu_var(mmu_gathers);
}
-#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0)
+/*
+ * Memorize the range for the TLB flush.
+ */
+static inline void
+tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep, unsigned long addr)
+{
+ if (!tlb->fullmm) {
+ if (addr < tlb->range_start)
+ tlb->range_start = addr;
+ if (addr + PAGE_SIZE > tlb->range_end)
+ tlb->range_end = addr + PAGE_SIZE;
+ }
+}
/*
* In the case of tlb vma handling, we can optimise these away in the
static inline void
tlb_start_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
{
- if (!tlb->fullmm)
+ if (!tlb->fullmm) {
flush_cache_range(vma, vma->vm_start, vma->vm_end);
+ tlb->range_start = TASK_SIZE;
+ tlb->range_end = 0;
+ }
}
static inline void
tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
{
- if (!tlb->fullmm)
- flush_tlb_range(vma, vma->vm_start, vma->vm_end);
+ if (!tlb->fullmm && tlb->range_end > 0)
+ flush_tlb_range(vma, tlb->range_start, tlb->range_end);
}
#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page)
#define __NR_dup3 (__NR_SYSCALL_BASE+358)
#define __NR_pipe2 (__NR_SYSCALL_BASE+359)
#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360)
+#define __NR_preadv (__NR_SYSCALL_BASE+361)
+#define __NR_pwritev (__NR_SYSCALL_BASE+362)
/*
* The following SWIs are ARM private.
CALL(sys_dup3)
CALL(sys_pipe2)
/* 360 */ CALL(sys_inotify_init1)
+ CALL(sys_preadv)
+ CALL(sys_pwritev)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
*(u32 *)loc = offset & 0x7fffffff;
break;
+ case R_ARM_MOVW_ABS_NC:
+ case R_ARM_MOVT_ABS:
+ offset = *(u32 *)loc;
+ offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+ offset = (offset ^ 0x8000) - 0x8000;
+
+ offset += sym->st_value;
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+ offset >>= 16;
+
+ *(u32 *)loc &= 0xfff0f000;
+ *(u32 *)loc |= ((offset & 0xf000) << 4) |
+ (offset & 0x0fff);
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
#include <linux/net.h>
#include <linux/ipc.h>
#include <linux/uaccess.h>
+#include <linux/slab.h>
struct oldabi_stat64 {
unsigned long long st_dev;
int flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_oldabi_stat64(&stat, statbuf);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_oldabi_stat64(&stat, statbuf);
}
struct oabi_flock64 {
.handler = at91rm9200_timer_interrupt
};
-static cycle_t read_clk32k(void)
+static cycle_t read_clk32k(struct clocksource *cs)
{
return read_CRTR();
}
* Clocksource: just a monotonic counter of MCK/16 cycles.
* We don't care whether or not PIT irqs are enabled.
*/
-static cycle_t read_pit_clk(void)
+static cycle_t read_pit_clk(struct clocksource *cs)
{
unsigned long flags;
u32 elapsed;
comment "DaVinci Core Type"
-config ARCH_DAVINCI644x
- default y
+config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
comment "DaVinci Board Type"
config MACH_DAVINCI_EVM
- bool "TI DaVinci EVM"
+ bool "TI DM644x EVM"
default y
- depends on ARCH_DAVINCI644x
+ depends on ARCH_DAVINCI_DM644x
help
Configure this option to specify the whether the board used
- for development is a DaVinci EVM
+ for development is a DM644x EVM
+
+
+config DAVINCI_MUX
+ bool "DAVINCI multiplexing support"
+ depends on ARCH_DAVINCI
+ default y
+ help
+ Pin multiplexing support for DAVINCI boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
+
+config DAVINCI_MUX_DEBUG
+ bool "Multiplexing debug output"
+ depends on DAVINCI_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+ bool "Warn about pins the bootloader didn't set up"
+ depends on DAVINCI_MUX
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+ bool "Reset unused clocks during boot"
+ depends on ARCH_DAVINCI
+ help
+ Say Y if you want to reset unused clocks during boot.
+ This option saves power, but assumes all drivers are
+ using the clock framework. Broken drivers that do not
+ yet use clock framework may not work with this option.
+ If you are booting from another operating system, you
+ probably do not want this option enabled until your
+ device drivers work properly.
endmenu
# Common objects
obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
- gpio.o mux.o devices.o usb.o
+ gpio.o devices.o dma.o usb.o
+
+obj-$(CONFIG_DAVINCI_MUX) += mux.o
+
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
# Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/etherdevice.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
+#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/psc.h>
+#include <mach/nand.h>
-/* other misc. init functions */
-void __init davinci_psc_init(void);
-void __init davinci_irq_init(void);
-void __init davinci_map_common_io(void);
-void __init davinci_init_common_hw(void);
+#define DM644X_EVM_PHY_MASK (0x2)
+#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define DAVINCI_CFC_ATA_BASE 0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
+
+#define LXT971_PHY_ID (0x001378e2)
+#define LXT971_PHY_MASK (0xfffffff0)
static struct mtd_partition davinci_evm_norflash_partitions[] = {
- /* bootloader (U-Boot, etc) in first 4 sectors */
+ /* bootloader (UBL, U-Boot, etc) in first 5 sectors */
{
.name = "bootloader",
.offset = 0,
- .size = 4 * SZ_64K,
+ .size = 5 * SZ_64K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next 1 sectors */
.resource = &davinci_evm_norflash_resource,
};
-#endif
+/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
+ * It may used instead of the (default) NOR chip to boot, using TI's
+ * tools to install the secondary boot loader (UBL) and U-Boot.
+ */
+struct mtd_partition davinci_evm_nandflash_partition[] = {
+ /* Bootloader layout depends on whose u-boot is installed, but we
+ * can hide all the details.
+ * - block 0 for u-boot environment ... in mainline u-boot
+ * - block 1 for UBL (plus up to four backup copies in blocks 2..5)
+ * - blocks 6...? for u-boot
+ * - blocks 16..23 for u-boot environment ... in TI's u-boot
+ */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_256K + SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* Kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ },
+ /* File system (older GIT kernels started this on the 5MB mark) */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* A few blocks at end hold a flash BBT ... created by TI's CCS
+ * using flashwriter_nand.out, but ignored by TI's versions of
+ * Linux and u-boot. We boot faster by using them.
+ */
+};
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+static struct davinci_nand_pdata davinci_evm_nandflash_data = {
+ .parts = davinci_evm_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
+ .ecc_mode = NAND_ECC_HW,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_evm_nandflash_resource[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_evm_nandflash_device = {
+ .name = "davinci_nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
+ .resource = davinci_evm_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+ .name = "davincifb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &davinci_fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = 0,
+};
+
+static struct platform_device rtc_dev = {
+ .name = "rtc_davinci_evm",
+ .id = -1,
+};
static struct resource ide_resources[] = {
{
},
};
-#endif
-
/*----------------------------------------------------------------------*/
/*
gpio_request(gpio + 7, "nCF_SEL");
gpio_direction_output(gpio + 7, 1);
- /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+ /* irlml6401 switches over 1A, in under 8 msec;
+ * now it can be managed by nDRV_VBUS ...
+ */
setup_usb(500, 8);
return 0;
* - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
* - ... newer boards may have more
*/
+static struct memory_accessor *at24_mem_acc;
+
+static void at24_setup(struct memory_accessor *mem_acc, void *context)
+{
+ DECLARE_MAC_BUF(mac_str);
+ char mac_addr[6];
+
+ at24_mem_acc = mem_acc;
+
+ /* Read MAC addr from EEPROM */
+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
+ printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
+ print_mac(mac_str, mac_addr));
+ }
+}
+
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
+ .setup = at24_setup,
};
+int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->read(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_read);
+
+int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->write(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_write);
+
+/*
+ * MSP430 supports RTC, card detection, input from IR remote, and
+ * a bit more. It triggers interrupts on GPIO(7) from pressing
+ * buttons on the IR remote, and for card detect switches.
+ */
+static struct i2c_client *dm6446evm_msp;
+
+static int dm6446evm_msp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ dm6446evm_msp = client;
+ return 0;
+}
+
+static int dm6446evm_msp_remove(struct i2c_client *client)
+{
+ dm6446evm_msp = NULL;
+ return 0;
+}
+
+static const struct i2c_device_id dm6446evm_msp_ids[] = {
+ { "dm6446evm_msp", 0, },
+ { /* end of list */ },
+};
+
+static struct i2c_driver dm6446evm_msp_driver = {
+ .driver.name = "dm6446evm_msp",
+ .id_table = dm6446evm_msp_ids,
+ .probe = dm6446evm_msp_probe,
+ .remove = dm6446evm_msp_remove,
+};
+
+static int dm6444evm_msp430_get_pins(void)
+{
+ static const char txbuf[2] = { 2, 4, };
+ char buf[4];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = 0,
+ .len = 2,
+ .buf = (void __force *)txbuf,
+ },
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = I2C_M_RD,
+ .len = 4,
+ .buf = buf,
+ },
+ };
+ int status;
+
+ if (!dm6446evm_msp)
+ return -ENXIO;
+
+ /* Command 4 == get input state, returns port 2 and port3 data
+ * S Addr W [A] len=2 [A] cmd=4 [A]
+ * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
+ */
+ status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
+ if (status < 0)
+ return status;
+
+ dev_dbg(&dm6446evm_msp->dev,
+ "PINS: %02x %02x %02x %02x\n",
+ buf[0], buf[1], buf[2], buf[3]);
+
+ return (buf[3] << 8) | buf[2];
+}
+
static struct i2c_board_info __initdata i2c_info[] = {
+ {
+ I2C_BOARD_INFO("dm6446evm_msp", 0x23),
+ },
{
I2C_BOARD_INFO("pcf8574", 0x38),
.platform_data = &pcf_data_u2,
},
/* ALSO:
* - tvl320aic33 audio codec (0x1b)
- * - msp430 microcontroller (0x23)
* - tvp5146 video decoder (0x5d)
*/
};
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
+ i2c_add_driver(&dm6446evm_msp_driver);
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
static struct platform_device *davinci_evm_devices[] __initdata = {
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
- &davinci_evm_norflash_device,
-#endif
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
- &ide_dev,
-#endif
+ &davinci_fb_device,
+ &rtc_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
};
static void __init
davinci_evm_map_io(void)
{
davinci_map_common_io();
+ dm644x_init();
}
-static __init void davinci_evm_init(void)
+static int davinci_phy_fixup(struct phy_device *phydev)
{
- davinci_psc_init();
+ unsigned int control;
+ /* CRITICAL: Fix for increasing PHY signal drive strength for
+ * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
+ * signal strength was low causing TX to fail randomly. The
+ * fix is to Set bit 11 (Increased MII drive strength) of PHY
+ * register 26 (Digital Config register) on this phy. */
+ control = phy_read(phydev, 26);
+ phy_write(phydev, 26, (control | 0x800));
+ return 0;
+}
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
- printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
- "but share pins.\n\t Disable IDE for NOR support.\n");
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
#endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+ defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
#endif
+static __init void davinci_evm_init(void)
+{
+ struct clk *aemif_clk;
+
+ aemif_clk = clk_get(NULL, "aemif");
+ clk_enable(aemif_clk);
+
+ if (HAS_ATA) {
+ if (HAS_NAND || HAS_NOR)
+ pr_warning("WARNING: both IDE and Flash are "
+ "enabled, but they share AEMIF pins.\n"
+ "\tDisable IDE for NAND/NOR support.\n");
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN);
+ davinci_cfg_reg(DM644X_HDIREN);
+ platform_device_register(&ide_dev);
+ } else if (HAS_NAND || HAS_NOR) {
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+ /* only one device will be jumpered and detected */
+ if (HAS_NAND) {
+ platform_device_register(&davinci_evm_nandflash_device);
+ evm_leds[7].default_trigger = "nand-disk";
+ if (HAS_NOR)
+ pr_warning("WARNING: both NAND and NOR flash "
+ "are enabled; disable one of them.\n");
+ } else if (HAS_NOR)
+ platform_device_register(&davinci_evm_norflash_device);
+ }
+
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
+
+ davinci_serial_init(&uart_config);
+
+ /* Register the fixup for PHY on DaVinci */
+ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+ davinci_phy_fixup);
+
}
static __init void davinci_evm_irq_init(void)
{
- davinci_init_common_hw();
davinci_irq_init();
}
-MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
+MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
/*
- * TI DaVinci clock config file
+ * Clock and PLL control for DaVinci devices
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <mach/psc.h>
+#include <mach/cputype.h>
#include "clock.h"
-/* PLL/Reset register offsets */
-#define PLLM 0x110
-
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
-static unsigned int commonrate;
-static unsigned int armrate;
-static unsigned int fixedrate = 27000000; /* 27 MHZ */
-
-extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
-
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *id)
+static unsigned psc_domain(struct clk *clk)
{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
+ return (clk->flags & PSC_DSP)
+ ? DAVINCI_GPSC_DSPDOMAIN
+ : DAVINCI_GPSC_ARMDOMAIN;
}
-EXPORT_SYMBOL(clk_get);
-void clk_put(struct clk *clk)
+static void __clk_enable(struct clk *clk)
{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-static int __clk_enable(struct clk *clk)
-{
- if (clk->flags & ALWAYS_ENABLED)
- return 0;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
- return 0;
+ if (clk->parent)
+ __clk_enable(clk->parent);
+ if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
{
- if (clk->usecount)
+ if (WARN_ON(clk->usecount == 0))
return;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
+ if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+ if (clk->parent)
+ __clk_disable(clk->parent);
}
int clk_enable(struct clk *clk)
{
unsigned long flags;
- int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- if (clk->usecount++ == 0) {
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = __clk_enable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(clk_enable);
if (clk == NULL || IS_ERR(clk))
return;
- if (clk->usecount > 0 && !(--clk->usecount)) {
- spin_lock_irqsave(&clockfw_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_round_rate);
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ if (WARN(clk->parent && !clk->parent->rate,
+ "CLK: %s parent %s has no rate!\n",
+ clk->name, clk->parent->name))
+ return -EINVAL;
+
mutex_lock(&clocks_mutex);
- list_add(&clk->node, &clocks);
+ list_add_tail(&clk->node, &clocks);
mutex_unlock(&clocks_mutex);
+ /* If rate is already set, use it */
+ if (clk->rate)
+ return 0;
+
+ /* Otherwise, default to parent rate */
+ if (clk->parent)
+ clk->rate = clk->parent->rate;
+
return 0;
}
EXPORT_SYMBOL(clk_register);
}
EXPORT_SYMBOL(clk_unregister);
-static struct clk davinci_clks[] = {
- {
- .name = "ARMCLK",
- .rate = &armrate,
- .lpsc = -1,
- .flags = ALWAYS_ENABLED,
- },
- {
- .name = "UART",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_UART0,
- },
- {
- .name = "EMACCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
- },
- {
- .name = "I2CCLK",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_I2C,
- },
- {
- .name = "IDECLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_ATA,
- },
- {
- .name = "McBSPCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_McBSP,
- },
- {
- .name = "MMCSDCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_MMC_SD,
- },
- {
- .name = "SPICLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_SPI,
- },
- {
- .name = "gpio",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_GPIO,
- },
- {
- .name = "usb",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_USB,
- },
- {
- .name = "AEMIFCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_AEMIF,
- .usecount = 1,
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+
+ spin_lock_irq(&clockfw_lock);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->usecount > 0)
+ continue;
+ if (!(ck->flags & CLK_PSC))
+ continue;
+
+ /* ignore if in Disabled or SwRstDisable states */
+ if (!davinci_psc_is_clk_active(ck->lpsc))
+ continue;
+
+ pr_info("Clocks: disable unused %s\n", ck->name);
+ davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
}
-};
+ spin_unlock_irq(&clockfw_lock);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
-int __init davinci_clk_init(void)
+static void clk_sysclk_recalc(struct clk *clk)
{
- struct clk *clkp;
- int count = 0;
- u32 pll_mult;
-
- pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
- commonrate = ((pll_mult + 1) * 27000000) / 6;
- armrate = ((pll_mult + 1) * 27000000) / 2;
-
- for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
- count++, clkp++) {
- clk_register(clkp);
-
- /* Turn on clocks that have been enabled in the
- * table above */
- if (clkp->usecount)
- clk_enable(clkp);
+ u32 v, plldiv;
+ struct pll_data *pll;
+
+ /* If this is the PLL base clock, no more calculations needed */
+ if (clk->pll_data)
+ return;
+
+ if (WARN_ON(!clk->parent))
+ return;
+
+ clk->rate = clk->parent->rate;
+
+ /* Otherwise, the parent must be a PLL */
+ if (WARN_ON(!clk->parent->pll_data))
+ return;
+
+ pll = clk->parent->pll_data;
+
+ /* If pre-PLL, source clock is before the multiplier and divider(s) */
+ if (clk->flags & PRE_PLL)
+ clk->rate = pll->input_rate;
+
+ if (!clk->div_reg)
+ return;
+
+ v = __raw_readl(pll->base + clk->div_reg);
+ if (v & PLLDIV_EN) {
+ plldiv = (v & PLLDIV_RATIO_MASK) + 1;
+ if (plldiv)
+ clk->rate /= plldiv;
+ }
+}
+
+static void __init clk_pll_init(struct clk *clk)
+{
+ u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
+ u8 bypass;
+ struct pll_data *pll = clk->pll_data;
+
+ pll->base = IO_ADDRESS(pll->phys_base);
+ ctrl = __raw_readl(pll->base + PLLCTL);
+ clk->rate = pll->input_rate = clk->parent->rate;
+
+ if (ctrl & PLLCTL_PLLEN) {
+ bypass = 0;
+ mult = __raw_readl(pll->base + PLLM);
+ mult = (mult & PLLM_PLLM_MASK) + 1;
+ } else
+ bypass = 1;
+
+ if (pll->flags & PLL_HAS_PREDIV) {
+ prediv = __raw_readl(pll->base + PREDIV);
+ if (prediv & PLLDIV_EN)
+ prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
+ else
+ prediv = 1;
+ }
+
+ /* pre-divider is fixed, but (some?) chips won't report that */
+ if (cpu_is_davinci_dm355() && pll->num == 1)
+ prediv = 8;
+
+ if (pll->flags & PLL_HAS_POSTDIV) {
+ postdiv = __raw_readl(pll->base + POSTDIV);
+ if (postdiv & PLLDIV_EN)
+ postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
+ else
+ postdiv = 1;
+ }
+
+ if (!bypass) {
+ clk->rate /= prediv;
+ clk->rate *= mult;
+ clk->rate /= postdiv;
+ }
+
+ pr_debug("PLL%d: input = %lu MHz [ ",
+ pll->num, clk->parent->rate / 1000000);
+ if (bypass)
+ pr_debug("bypass ");
+ if (prediv > 1)
+ pr_debug("/ %d ", prediv);
+ if (mult > 1)
+ pr_debug("* %d ", mult);
+ if (postdiv > 1)
+ pr_debug("/ %d ", postdiv);
+ pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+}
+
+int __init davinci_clk_init(struct davinci_clk *clocks)
+ {
+ struct davinci_clk *c;
+ struct clk *clk;
+
+ for (c = clocks; c->lk.clk; c++) {
+ clk = c->lk.clk;
+
+ if (clk->pll_data)
+ clk_pll_init(clk);
+
+ /* Calculate rates for PLL-derived clocks */
+ else if (clk->flags & CLK_PLL)
+ clk_sysclk_recalc(clk);
+
+ if (clk->lpsc)
+ clk->flags |= CLK_PSC;
+
+ clkdev_add(&c->lk);
+ clk_register(clk);
+
+ /* Turn on clocks that Linux doesn't otherwise manage */
+ if (clk->flags & ALWAYS_ENABLED)
+ clk_enable(clk);
}
return 0;
{
}
-static int davinci_ck_show(struct seq_file *m, void *v)
+#define CLKNAME_MAX 10 /* longest clock name */
+#define NEST_DELTA 2
+#define NEST_MAX 4
+
+static void
+dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
{
- struct clk *cp;
+ char *state;
+ char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
+ struct clk *clk;
+ unsigned i;
+
+ if (parent->flags & CLK_PLL)
+ state = "pll";
+ else if (parent->flags & CLK_PSC)
+ state = "psc";
+ else
+ state = "";
+
+ /* <nest spaces> name <pad to end> */
+ memset(buf, ' ', sizeof(buf) - 1);
+ buf[sizeof(buf) - 1] = 0;
+ i = strlen(parent->name);
+ memcpy(buf + nest, parent->name,
+ min(i, (unsigned)(sizeof(buf) - 1 - nest)));
+
+ seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
+ buf, parent->usecount, state, clk_get_rate(parent));
+ /* REVISIT show device associations too */
+
+ /* cost is now small, but not linear... */
+ list_for_each_entry(clk, &clocks, node) {
+ if (clk->parent == parent)
+ dump_clock(s, nest + NEST_DELTA, clk);
+ }
+}
- list_for_each_entry(cp, &clocks, node)
- seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
+static int davinci_ck_show(struct seq_file *m, void *v)
+{
+ /* Show clock tree; we know the main oscillator is first.
+ * We trust nonzero usecounts equate to PSC enables...
+ */
+ mutex_lock(&clocks_mutex);
+ if (!list_empty(&clocks))
+ dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
+ mutex_unlock(&clocks_mutex);
return 0;
}
}
__initcall(davinci_ck_proc_init);
-#endif /* CONFIG_DEBUG_PROC_FS */
+#endif /* CONFIG_DEBUG_PROC_FS */
/*
* TI DaVinci clock definitions
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
#define __ARCH_ARM_DAVINCI_CLOCK_H
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define MAX_PLL 2
+
+/* PLL/Reset register offsets */
+#define PLLCTL 0x100
+#define PLLCTL_PLLEN BIT(0)
+#define PLLCTL_CLKMODE BIT(8)
+
+#define PLLM 0x110
+#define PLLM_PLLM_MASK 0xff
+
+#define PREDIV 0x114
+#define PLLDIV1 0x118
+#define PLLDIV2 0x11c
+#define PLLDIV3 0x120
+#define POSTDIV 0x128
+#define BPDIV 0x12c
+#define PLLCMD 0x138
+#define PLLSTAT 0x13c
+#define PLLALNCTL 0x140
+#define PLLDCHANGE 0x144
+#define PLLCKEN 0x148
+#define PLLCKSTAT 0x14c
+#define PLLSYSTAT 0x150
+#define PLLDIV4 0x160
+#define PLLDIV5 0x164
+#define PLLDIV6 0x168
+#define PLLDIV7 0x16c
+#define PLLDIV8 0x170
+#define PLLDIV9 0x174
+#define PLLDIV_EN BIT(15)
+#define PLLDIV_RATIO_MASK 0x1f
+
+struct pll_data {
+ u32 phys_base;
+ void __iomem *base;
+ u32 num;
+ u32 flags;
+ u32 input_rate;
+};
+#define PLL_HAS_PREDIV 0x01
+#define PLL_HAS_POSTDIV 0x02
+
struct clk {
struct list_head node;
struct module *owner;
const char *name;
- unsigned int *rate;
- int id;
- __s8 usecount;
- __u8 flags;
- __u8 lpsc;
+ unsigned long rate;
+ u8 usecount;
+ u8 flags;
+ u8 lpsc;
+ struct clk *parent;
+ struct pll_data *pll_data;
+ u32 div_reg;
};
/* Clock flags */
-#define RATE_CKCTL 1
-#define RATE_FIXED 2
-#define RATE_PROPAGATES 4
-#define VIRTUAL_CLOCK 8
-#define ALWAYS_ENABLED 16
-#define ENABLE_REG_32BIT 32
+#define ALWAYS_ENABLED BIT(1)
+#define CLK_PSC BIT(2)
+#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PLL BIT(4) /* PLL-derived clock */
+#define PRE_PLL BIT(5) /* source is before PLL mult/div */
+
+struct davinci_clk {
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+int davinci_clk_init(struct davinci_clk *clocks);
#endif
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/mux.h>
+
+#define DAVINCI_I2C_BASE 0x01C21000
static struct resource i2c_resources[] = {
{
void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
{
+ if (cpu_is_davinci_dm644x())
+ davinci_cfg_reg(DM644X_I2C);
+
davinci_i2c_device.dev.platform_data = pdata;
(void) platform_device_register(&davinci_i2c_device);
}
--- /dev/null
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/dm644x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM644X_REF_FREQ 27000000
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ .rate = DM644X_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .pll_data = &pll1_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk5 = {
+ .name = "pll1_sysclk5",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV5,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2",
+ .parent = &ref_clk,
+ .pll_data = &pll2_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+ .name = "pll2_sysclk2",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll2_sysclkbp = {
+ .name = "pll2_sysclkbp",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk dsp_clk = {
+ .name = "dsp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_GEM,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+ .name = "arm",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk vicp_clk = {
+ .name = "vicp",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_IMCOP,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk vpss_master_clk = {
+ .name = "vpss_master",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSMSTR,
+ .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+ .name = "vpss_slave",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk emac_clk = {
+ .name = "emac",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk ide_clk = {
+ .name = "ide",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_ATA,
+};
+
+static struct clk asp_clk = {
+ .name = "asp0",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk mmcsd_clk = {
+ .name = "mmcsd",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk spi_clk = {
+ .name = "spi",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk usb_clk = {
+ .name = "usb",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct clk vlynq_clk = {
+ .name = "vlynq",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_VLYNQ,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+ .name = "pwm2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER2,
+ .usecount = 1, /* REVISIT: why cant' this be disabled? */
+};
+
+struct davinci_clk dm644x_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+ CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+ CLK(NULL, "dsp", &dsp_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "vicp", &vicp_clk),
+ CLK(NULL, "vpss_master", &vpss_master_clk),
+ CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK("palm_bk3710", NULL, &ide_clk),
+ CLK("soc-audio.0", NULL, &asp_clk),
+ CLK("davinci_mmc.0", NULL, &mmcsd_clk),
+ CLK(NULL, "spi", &spi_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "usb", &usb_clk),
+ CLK(NULL, "vlynq", &vlynq_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "pwm2", &pwm2_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+
+static struct resource dm644x_emac_resources[] = {
+ {
+ .start = DM644X_EMAC_BASE,
+ .end = DM644X_EMAC_BASE + 0x47ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_EMACINT,
+ .end = IRQ_EMACINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm644x_emac_device = {
+ .name = "davinci_emac",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(dm644x_emac_resources),
+ .resource = dm644x_emac_resources,
+};
+
+#endif
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm644x_pins[] = {
+MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
+MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
+MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
+
+MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
+
+MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
+
+MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)
+
+MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false)
+
+MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false)
+
+MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true)
+MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true)
+
+MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false)
+
+MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false)
+
+MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false)
+
+MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false)
+MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false)
+MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false)
+
+MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true)
+
+MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true)
+
+MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true)
+MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false)
+MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false)
+MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true)
+
+MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true)
+
+MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
+MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
+};
+
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm644x_no_event[] = {
+ 0, 1, 12, 13, 14,
+ 15, 25, 30, 31, 45,
+ 46, 47, 55, 56, 57,
+ 58, 59, 60, 61, 62,
+ 63,
+ -1
+};
+
+static struct edma_soc_info dm644x_edma_info = {
+ .n_channel = 64,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .noevent = dma_chan_dm644x_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using TC*_ERR */
+};
+
+static struct platform_device dm644x_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm644x_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+void __init dm644x_init(void)
+{
+ davinci_clk_init(dm644x_clks);
+ davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+}
+
+static int __init dm644x_init_devices(void)
+{
+ if (!cpu_is_davinci_dm644x())
+ return 0;
+
+ platform_device_register(&dm644x_edma_device);
+ return 0;
+}
+postcore_initcall(dm644x_init_devices);
--- /dev/null
+/*
+ * EDMA3 support for DaVinci
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+
+#include <mach/cputype.h>
+#include <mach/memory.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+
+
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT 0x00
+#define PARM_SRC 0x04
+#define PARM_A_B_CNT 0x08
+#define PARM_DST 0x0c
+#define PARM_SRC_DST_BIDX 0x10
+#define PARM_LINK_BCNTRLD 0x14
+#define PARM_SRC_DST_CIDX 0x18
+#define PARM_CCNT 0x1c
+
+#define PARM_SIZE 0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER 0x00 /* 64 bits */
+#define SH_ECR 0x08 /* 64 bits */
+#define SH_ESR 0x10 /* 64 bits */
+#define SH_CER 0x18 /* 64 bits */
+#define SH_EER 0x20 /* 64 bits */
+#define SH_EECR 0x28 /* 64 bits */
+#define SH_EESR 0x30 /* 64 bits */
+#define SH_SER 0x38 /* 64 bits */
+#define SH_SECR 0x40 /* 64 bits */
+#define SH_IER 0x50 /* 64 bits */
+#define SH_IECR 0x58 /* 64 bits */
+#define SH_IESR 0x60 /* 64 bits */
+#define SH_IPR 0x68 /* 64 bits */
+#define SH_ICR 0x70 /* 64 bits */
+#define SH_IEVAL 0x78
+#define SH_QER 0x80
+#define SH_QEER 0x84
+#define SH_QEECR 0x88
+#define SH_QEESR 0x8c
+#define SH_QSER 0x90
+#define SH_QSECR 0x94
+#define SH_SIZE 0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV 0x0000
+#define EDMA_CCCFG 0x0004
+#define EDMA_QCHMAP 0x0200 /* 8 registers */
+#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM 0x0260
+#define EDMA_QUETCMAP 0x0280
+#define EDMA_QUEPRI 0x0284
+#define EDMA_EMR 0x0300 /* 64 bits */
+#define EDMA_EMCR 0x0308 /* 64 bits */
+#define EDMA_QEMR 0x0310
+#define EDMA_QEMCR 0x0314
+#define EDMA_CCERR 0x0318
+#define EDMA_CCERRCLR 0x031c
+#define EDMA_EEVAL 0x0320
+#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/
+#define EDMA_QRAE 0x0380 /* 4 registers */
+#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */
+#define EDMA_QSTAT 0x0600 /* 2 registers */
+#define EDMA_QWMTHRA 0x0620
+#define EDMA_QWMTHRB 0x0624
+#define EDMA_CCSTAT 0x0640
+
+#define EDMA_M 0x1000 /* global channel registers */
+#define EDMA_ECR 0x1008
+#define EDMA_ECRH 0x100C
+#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */
+#define EDMA_PARM 0x4000 /* 128 param entries */
+
+#define DAVINCI_DMA_3PCC_BASE 0x01C00000
+
+#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_MAX_DMACH 64
+#define EDMA_MAX_PARAMENTRY 512
+#define EDMA_MAX_EVQUE 2 /* FIXME too small */
+
+
+/*****************************************************************************/
+
+static void __iomem *edmacc_regs_base;
+
+static inline unsigned int edma_read(int offset)
+{
+ return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+}
+
+static inline void edma_write(int offset, int val)
+{
+ __raw_writel(val, edmacc_regs_base + offset);
+}
+static inline void edma_modify(int offset, unsigned and, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ val |= or;
+ edma_write(offset, val);
+}
+static inline void edma_and(int offset, unsigned and)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ edma_write(offset, val);
+}
+static inline void edma_or(int offset, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val |= or;
+ edma_write(offset, val);
+}
+static inline unsigned int edma_read_array(int offset, int i)
+{
+ return edma_read(offset + (i << 2));
+}
+static inline void edma_write_array(int offset, int i, unsigned val)
+{
+ edma_write(offset + (i << 2), val);
+}
+static inline void edma_modify_array(int offset, int i,
+ unsigned and, unsigned or)
+{
+ edma_modify(offset + (i << 2), and, or);
+}
+static inline void edma_or_array(int offset, int i, unsigned or)
+{
+ edma_or(offset + (i << 2), or);
+}
+static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+{
+ edma_or(offset + ((i*2 + j) << 2), or);
+}
+static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+{
+ edma_write(offset + ((i*2 + j) << 2), val);
+}
+static inline unsigned int edma_shadow0_read(int offset)
+{
+ return edma_read(EDMA_SHADOW0 + offset);
+}
+static inline unsigned int edma_shadow0_read_array(int offset, int i)
+{
+ return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+}
+static inline void edma_shadow0_write(int offset, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset, val);
+}
+static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+}
+static inline unsigned int edma_parm_read(int offset, int param_no)
+{
+ return edma_read(EDMA_PARM + offset + (param_no << 5));
+}
+static inline void edma_parm_write(int offset, int param_no, unsigned val)
+{
+ edma_write(EDMA_PARM + offset + (param_no << 5), val);
+}
+static inline void edma_parm_modify(int offset, int param_no,
+ unsigned and, unsigned or)
+{
+ edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+}
+static inline void edma_parm_and(int offset, int param_no, unsigned and)
+{
+ edma_and(EDMA_PARM + offset + (param_no << 5), and);
+}
+static inline void edma_parm_or(int offset, int param_no, unsigned or)
+{
+ edma_or(EDMA_PARM + offset + (param_no << 5), or);
+}
+
+/*****************************************************************************/
+
+/* actual number of DMA channels and slots on this silicon */
+static unsigned num_channels;
+static unsigned num_slots;
+
+static struct dma_interrupt_data {
+ void (*callback)(unsigned channel, unsigned short ch_status,
+ void *data);
+ void *data;
+} intr_data[EDMA_MAX_DMACH];
+
+/* The edma_inuse bit for each PaRAM slot is clear unless the
+ * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+ */
+static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+
+/* The edma_noevent bit for each channel is clear unless
+ * it doesn't trigger DMA events on this platform. It uses a
+ * bit of SOC-specific initialization code.
+ */
+static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+ .link_bcntrld = 0xffff,
+ .ccnt = 1,
+};
+
+static const int __initconst
+queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
+/* {event queue no, TC no} */
+ {0, 0},
+ {1, 1},
+ {-1, -1}
+};
+
+static const int __initconst
+queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
+ /* {event queue no, Priority} */
+ {0, 3},
+ {1, 7},
+ {-1, -1}
+};
+
+/*****************************************************************************/
+
+static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+{
+ int bit = (ch_no & 0x7) * 4;
+
+ /* default to low priority queue */
+ if (queue_no == EVENTQ_DEFAULT)
+ queue_no = EVENTQ_1;
+
+ queue_no &= 7;
+ edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+ ~(0x7 << bit), queue_no << bit);
+}
+
+static void __init map_queue_tc(int queue_no, int tc_no)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+}
+
+static void __init assign_priority_to_queue(int queue_no, int priority)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+}
+
+static inline void
+setup_dma_interrupt(unsigned lch,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data)
+{
+ if (!callback) {
+ edma_shadow0_write_array(SH_IECR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+
+ intr_data[lch].callback = callback;
+ intr_data[lch].data = data;
+
+ if (callback) {
+ edma_shadow0_write_array(SH_ICR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ edma_shadow0_write_array(SH_IESR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+}
+
+/******************************************************************************
+ *
+ * DMA interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_irq_handler\n");
+
+ if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
+ && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j;
+ if (edma_shadow0_read_array(SH_IPR, 0))
+ j = 0;
+ else if (edma_shadow0_read_array(SH_IPR, 1))
+ j = 1;
+ else
+ break;
+ dev_dbg(data, "IPR%d %08x\n", j,
+ edma_shadow0_read_array(SH_IPR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_shadow0_write_array(SH_ICR, j, (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k, DMA_COMPLETE,
+ intr_data[k].data);
+ }
+ }
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_shadow0_write(SH_IEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * DMA error interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_ccerr_handler\n");
+
+ if ((edma_read_array(EDMA_EMR, 0) == 0) &&
+ (edma_read_array(EDMA_EMR, 1) == 0) &&
+ (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j = -1;
+ if (edma_read_array(EDMA_EMR, 0))
+ j = 0;
+ else if (edma_read_array(EDMA_EMR, 1))
+ j = 1;
+ if (j >= 0) {
+ dev_dbg(data, "EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, 1 << i);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j,
+ (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k,
+ DMA_CC_ERROR,
+ intr_data
+ [k].data);
+ }
+ }
+ }
+ } else if (edma_read(EDMA_QEMR)) {
+ dev_dbg(data, "QEMR %02x\n",
+ edma_read(EDMA_QEMR));
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_QEMR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_QEMCR, 1 << i);
+ edma_shadow0_write(SH_QSECR, (1 << i));
+
+ /* NOTE: not reported!! */
+ }
+ }
+ } else if (edma_read(EDMA_CCERR)) {
+ dev_dbg(data, "CCERR %08x\n",
+ edma_read(EDMA_CCERR));
+ /* FIXME: CCERR.BIT(16) ignored! much better
+ * to just write CCERRCLR with CCERR value...
+ */
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_CCERR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_CCERRCLR, 1 << i);
+
+ /* NOTE: not reported!! */
+ }
+ }
+ }
+ if ((edma_read_array(EDMA_EMR, 0) == 0)
+ && (edma_read_array(EDMA_EMR, 1) == 0)
+ && (edma_read(EDMA_QEMR) == 0)
+ && (edma_read(EDMA_CCERR) == 0)) {
+ break;
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_write(EDMA_EEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * Transfer controller error interrupt handlers
+ *
+ *****************************************************************************/
+
+#define tc_errs_handled false /* disabled as long as they're NOPs */
+
+static irqreturn_t dma_tc0err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc0err_handler\n");
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_tc1err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc1err_handler\n");
+ return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Resource alloc/free: dma channels, parameter RAM slots */
+
+/**
+ * edma_alloc_channel - allocate DMA channel and paired parameter RAM
+ * @channel: specific channel to allocate; negative for "any unmapped channel"
+ * @callback: optional; to be issued on DMA completion or errors
+ * @data: passed to callback
+ * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
+ * Controller (TC) executes requests using this channel. Use
+ * EVENTQ_DEFAULT unless you really need a high priority queue.
+ *
+ * This allocates a DMA channel and its associated parameter RAM slot.
+ * The parameter RAM is initialized to hold a dummy transfer.
+ *
+ * Normal use is to pass a specific channel number as @channel, to make
+ * use of hardware events mapped to that channel. When the channel will
+ * be used only for software triggering or event chaining, channels not
+ * mapped to hardware events (or mapped to unused events) are preferable.
+ *
+ * DMA transfers start from a channel using edma_start(), or by
+ * chaining. When the transfer described in that channel's parameter RAM
+ * slot completes, that slot's data may be reloaded through a link.
+ *
+ * DMA errors are only reported to the @callback associated with the
+ * channel driving that transfer, but transfer completion callbacks can
+ * be sent to another channel under control of the TCC field in
+ * the option word of the transfer's parameter RAM set. Drivers must not
+ * use DMA transfer completion callbacks for channels they did not allocate.
+ * (The same applies to TCC codes used in transfer chaining.)
+ *
+ * Returns the number of the channel, else negative errno.
+ */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data,
+ enum dma_event_q eventq_no)
+{
+ if (channel < 0) {
+ channel = 0;
+ for (;;) {
+ channel = find_next_bit(edma_noevent,
+ num_channels, channel);
+ if (channel == num_channels)
+ return -ENOMEM;
+ if (!test_and_set_bit(channel, edma_inuse))
+ break;
+ channel++;
+ }
+ } else if (channel >= num_channels) {
+ return -EINVAL;
+ } else if (test_and_set_bit(channel, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ /* ensure access through shadow region 0 */
+ edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+
+ /* ensure no events are pending */
+ edma_stop(channel);
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+
+ if (callback)
+ setup_dma_interrupt(channel, callback, data);
+
+ map_dmach_queue(channel, eventq_no);
+
+ return channel;
+}
+EXPORT_SYMBOL(edma_alloc_channel);
+
+
+/**
+ * edma_free_channel - deallocate DMA channel
+ * @channel: dma channel returned from edma_alloc_channel()
+ *
+ * This deallocates the DMA channel and associated parameter RAM slot
+ * allocated by edma_alloc_channel().
+ *
+ * Callers are responsible for ensuring the channel is inactive, and
+ * will not be reactivated by linking, chaining, or software calls to
+ * edma_start().
+ */
+void edma_free_channel(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+
+ setup_dma_interrupt(channel, NULL, NULL);
+ /* REVISIT should probably take out of shadow region 0 */
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(channel, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_channel);
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer. Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+int edma_alloc_slot(int slot)
+{
+ if (slot < 0) {
+ slot = num_channels;
+ for (;;) {
+ slot = find_next_zero_bit(edma_inuse,
+ num_slots, slot);
+ if (slot == num_slots)
+ return -ENOMEM;
+ if (!test_and_set_bit(slot, edma_inuse))
+ break;
+ }
+ } else if (slot < num_channels || slot >= num_slots) {
+ return -EINVAL;
+ } else if (test_and_set_bit(slot, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+
+ return slot;
+}
+EXPORT_SYMBOL(edma_alloc_slot);
+
+/**
+ * edma_free_slot - deallocate DMA parameter RAM
+ * @slot: parameter RAM slot returned from edma_alloc_slot()
+ *
+ * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
+ * Callers are responsible for ensuring the slot is inactive, and will
+ * not be activated.
+ */
+void edma_free_slot(unsigned slot)
+{
+ if (slot < num_channels || slot >= num_slots)
+ return;
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(slot, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (i) -- read/write partial slots */
+
+/**
+ * edma_set_src - set initial DMA source address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma_set_src_index().
+ */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set SAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+ } else {
+ /* clear SAM */
+ i &= ~SAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+
+ /* set the source port address
+ in source register of param structure */
+ edma_parm_write(PARM_SRC, slot, src_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_src);
+
+/**
+ * edma_set_dest - set initial DMA destination address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @dest_port: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma_set_dest_index().
+ */
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set DAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+ } else {
+ /* clear DAM */
+ i &= ~DAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+ /* set the destination port address
+ in dest register of param structure */
+ edma_parm_write(PARM_DST, slot, dest_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest);
+
+/**
+ * edma_get_position - returns the current transfer points
+ * @slot: parameter RAM slot being examined
+ * @src: pointer to source port position
+ * @dst: pointer to destination port position
+ *
+ * Returns current source and destination addresses for a particular
+ * parameter RAM slot. Its channel should not be active when this is called.
+ */
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+{
+ struct edmacc_param temp;
+
+ edma_read_slot(slot, &temp);
+ if (src != NULL)
+ *src = temp.src;
+ if (dst != NULL)
+ *dst = temp.dst;
+}
+EXPORT_SYMBOL(edma_get_position);
+
+/**
+ * edma_set_src_index - configure DMA source address indexing
+ * @slot: parameter RAM slot being configured
+ * @src_bidx: byte offset between source arrays in a frame
+ * @src_cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0xffff0000, src_bidx);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0xffff0000, src_cidx);
+ }
+}
+EXPORT_SYMBOL(edma_set_src_index);
+
+/**
+ * edma_set_dest_index - configure DMA destination address indexing
+ * @slot: parameter RAM slot being configured
+ * @dest_bidx: byte offset between destination arrays in a frame
+ * @dest_cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0x0000ffff, dest_bidx << 16);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0x0000ffff, dest_cidx << 16);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest_index);
+
+/**
+ * edma_set_transfer_params - configure DMA transfer parameters
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ * the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots. If you are not doing it
+ * all at once with edma_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register. In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO. It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma_set_transfer_params(unsigned slot,
+ u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+ 0x0000ffff, bcnt_rld << 16);
+ if (sync_mode == ASYNC)
+ edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+ else
+ edma_parm_or(PARM_OPT, slot, SYNCDIM);
+ /* Set the acount, bcount, ccount registers */
+ edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+ edma_parm_write(PARM_CCNT, slot, ccnt);
+ }
+}
+EXPORT_SYMBOL(edma_set_transfer_params);
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+void edma_link(unsigned from, unsigned to)
+{
+ if (from >= num_slots)
+ return;
+ if (to >= num_slots)
+ return;
+ edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+}
+EXPORT_SYMBOL(edma_link);
+
+/**
+ * edma_unlink - cut link from one parameter RAM slot
+ * @from: parameter RAM slot originating the link
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ * Its link is set to 0xffff.
+ */
+void edma_unlink(unsigned from)
+{
+ if (from >= num_slots)
+ return;
+ edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+}
+EXPORT_SYMBOL(edma_unlink);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (ii) -- read/write whole parameter sets */
+
+/**
+ * edma_write_slot - write parameter RAM data for slot
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once. This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma_write_slot(unsigned slot, const struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_write_slot);
+
+/**
+ * edma_read_slot - read parameter RAM data from slot
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma_read_slot(unsigned slot, struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_read_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Various EDMA channel control operations */
+
+/**
+ * edma_pause - pause dma on a channel
+ * @channel: on which edma_start() has been called
+ *
+ * This temporarily disables EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers on its behalf
+ */
+void edma_pause(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_pause);
+
+/**
+ * edma_resume - resumes dma on a paused channel
+ * @channel: on which edma_pause() has been called
+ *
+ * This re-enables EDMA hardware events on the specified channel.
+ */
+void edma_resume(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_resume);
+
+/**
+ * edma_start - start dma on a channel
+ * @channel: channel being activated
+ *
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software. (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ *
+ * Returns zero on success, else negative errno.
+ */
+int edma_start(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ /* EDMA channels without event association */
+ if (test_bit(channel, edma_noevent)) {
+ pr_debug("EDMA: ESR%d %08x\n", j,
+ edma_shadow0_read_array(SH_ESR, j));
+ edma_shadow0_write_array(SH_ESR, j, mask);
+ return 0;
+ }
+
+ /* EDMA channel with event association */
+ pr_debug("EDMA: ER%d %08x\n", j,
+ edma_shadow0_read_array(SH_ER, j));
+ /* Clear any pending error */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_shadow0_write_array(SH_EESR, j, mask);
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(edma_start);
+
+/**
+ * edma_stop - stops dma on the channel passed
+ * @channel: channel being deactivated
+ *
+ * When @lch is a channel, any active transfer is paused and
+ * all pending hardware events are cleared. The current transfer
+ * may not be resumed, and the channel's Parameter RAM should be
+ * reinitialized before being reused.
+ */
+void edma_stop(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, j, mask);
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write_array(EDMA_EMCR, j, mask);
+
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+
+ /* REVISIT: consider guarding against inappropriate event
+ * chaining by overwriting with dummy_paramset.
+ */
+ }
+}
+EXPORT_SYMBOL(edma_stop);
+
+/******************************************************************************
+ *
+ * It cleans ParamEntry qand bring back EDMA to initial state if media has
+ * been removed before EDMA has finished.It is usedful for removable media.
+ * Arguments:
+ * ch_no - channel no
+ *
+ * Return: zero on success, or corresponding error no on failure
+ *
+ * FIXME this should not be needed ... edma_stop() should suffice.
+ *
+ *****************************************************************************/
+
+void edma_clean_channel(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = (channel >> 5);
+ unsigned int mask = 1 << (channel & 0x1f);
+
+ pr_debug("EDMA: EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+ }
+}
+EXPORT_SYMBOL(edma_clean_channel);
+
+/*
+ * edma_clear_event - clear an outstanding event on the DMA channel
+ * Arguments:
+ * channel - channel number
+ */
+void edma_clear_event(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+ if (channel < 32)
+ edma_write(EDMA_ECR, 1 << channel);
+ else
+ edma_write(EDMA_ECRH, 1 << (channel - 32));
+}
+EXPORT_SYMBOL(edma_clear_event);
+
+/*-----------------------------------------------------------------------*/
+
+static int __init edma_probe(struct platform_device *pdev)
+{
+ struct edma_soc_info *info = pdev->dev.platform_data;
+ int i;
+ int status;
+ const s8 *noevent;
+ int irq = 0, err_irq = 0;
+ struct resource *r;
+ resource_size_t len;
+
+ if (!info)
+ return -ENODEV;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
+ if (!r)
+ return -ENODEV;
+
+ len = r->end - r->start + 1;
+
+ r = request_mem_region(r->start, len, r->name);
+ if (!r)
+ return -EBUSY;
+
+ edmacc_regs_base = ioremap(r->start, len);
+ if (!edmacc_regs_base) {
+ status = -EBUSY;
+ goto fail1;
+ }
+
+ num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
+ num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+
+ dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+
+ for (i = 0; i < num_slots; i++)
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
+ &dummy_paramset, PARM_SIZE);
+
+ noevent = info->noevent;
+ if (noevent) {
+ while (*noevent != -1)
+ set_bit(*noevent++, edma_noevent);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ irq, status);
+ goto fail;
+ }
+
+ err_irq = platform_get_irq(pdev, 1);
+ status = request_irq(err_irq, dma_ccerr_handler, 0,
+ "edma_error", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ err_irq, status);
+ goto fail;
+ }
+
+ if (tc_errs_handled) {
+ status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
+ "edma_tc0", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ IRQ_TCERRINT0, status);
+ return status;
+ }
+ status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
+ "edma_tc1", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
+ IRQ_TCERRINT, status);
+ return status;
+ }
+ }
+
+ /* Everything lives on transfer controller 1 until otherwise specified.
+ * This way, long transfers on the low priority queue
+ * started by the codec engine will not cause audio defects.
+ */
+ for (i = 0; i < num_channels; i++)
+ map_dmach_queue(i, EVENTQ_1);
+
+ /* Event queue to TC mapping */
+ for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+ map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
+
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
+
+ for (i = 0; i < info->n_region; i++) {
+ edma_write_array2(EDMA_DRAE, i, 0, 0x0);
+ edma_write_array2(EDMA_DRAE, i, 1, 0x0);
+ edma_write_array(EDMA_QRAE, i, 0x0);
+ }
+
+ return 0;
+
+fail:
+ if (err_irq)
+ free_irq(err_irq, NULL);
+ if (irq)
+ free_irq(irq, NULL);
+ iounmap(edmacc_regs_base);
+fail1:
+ release_mem_region(r->start, len);
+ return status;
+}
+
+
+static struct platform_driver edma_driver = {
+ .driver.name = "edma",
+};
+
+static int __init edma_init(void)
+{
+ return platform_driver_probe(&edma_driver, edma_probe);
+}
+arch_initcall(edma_init);
+
#include <linux/irq.h>
#include <linux/bitops.h>
+#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static unsigned __initdata ngpio;
/* create a non-inlined version */
-static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
+static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
{
int i, base;
- for (i = 0, base = 0;
- i < ARRAY_SIZE(chips);
- i++, base += 32) {
+ /* The gpio banks conceptually expose a segmented bitmap,
+ * and "ngpio" is one more than the largest zero-based
+ * bit index that's valid.
+ */
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ ngpio = 104;
+ } else if (cpu_is_davinci_dm644x()) { /* or dm337() */
+ ngpio = 71;
+ } else if (cpu_is_davinci_dm646x()) {
+ /* NOTE: each bank has several "reserved" bits,
+ * unusable as GPIOs. Only 33 of the GPIO numbers
+ * are usable, and we're not rejecting the others.
+ */
+ ngpio = 43;
+ } else {
+ /* if cpu_is_davinci_dm643x() ngpio = 111 */
+ pr_err("GPIO setup: how many GPIOs?\n");
+ return -EINVAL;
+ }
+
+ if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+ ngpio = DAVINCI_N_GPIO;
+
+ for (i = 0, base = 0; base < ngpio; i++, base += 32) {
chips[i].chip.label = "DaVinci";
chips[i].chip.direction_input = davinci_direction_in;
chips[i].chip.set = davinci_gpio_set;
chips[i].chip.base = base;
- chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+ chips[i].chip.ngpio = ngpio - base;
if (chips[i].chip.ngpio > 32)
chips[i].chip.ngpio = 32;
* We expect irqs will normally be set up as input pins, but they can also be
* used as output pins ... which is convenient for testing.
*
- * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition
- * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have
- * a good way to hook those up ...
+ * NOTE: The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
+ * on triggering (e.g. no edge options). We don't try to use those.
*
- * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * All those INTC hookups (direct, plus several IRQ banks) can also
* serve as EDMA event triggers.
*/
}
/*
- * NOTE: for suspend/resume, probably best to make a sysdev (and class)
- * with its suspend/resume calls hooking into the results of the set_wake()
+ * NOTE: for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
* calls ... so if no gpios are wakeup events the clock can be disabled,
* with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * can be set appropriately for GPIOV33 pins.
+ * (dm6446) can be set appropriately for GPIOV33 pins.
*/
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
+ unsigned bank_irq;
struct clk *clk;
+ u32 binten = 0;
+
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ bank_irq = IRQ_DM355_GPIOBNK0;
+ } else if (cpu_is_davinci_dm644x()) {
+ bank_irq = IRQ_GPIOBNK0;
+ } else if (cpu_is_davinci_dm646x()) {
+ bank_irq = IRQ_DM646X_GPIOBNK0;
+ } else {
+ printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+ return -EINVAL;
+ }
clk = clk_get(NULL, "gpio");
if (IS_ERR(clk)) {
printk(KERN_ERR "Error %ld getting gpio clock?\n",
PTR_ERR(clk));
- return 0;
+ return PTR_ERR(clk);
}
-
clk_enable(clk);
- for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
- gpio < DAVINCI_N_GPIO; bank++) {
+ for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+ gpio < ngpio;
+ bank++, bank_irq++) {
struct gpio_controller *__iomem g = gpio2controller(gpio);
unsigned i;
__raw_writel(~0, &g->clr_rising);
/* set up all irqs in this bank */
- set_irq_chained_handler(bank, gpio_irq_handler);
- set_irq_chip_data(bank, g);
- set_irq_data(bank, (void *)irq);
+ set_irq_chained_handler(bank_irq, gpio_irq_handler);
+ set_irq_chip_data(bank_irq, g);
+ set_irq_data(bank_irq, (void *)irq);
- for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
- i++, irq++, gpio++) {
+ for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
set_irq_chip(irq, &gpio_irqchip);
set_irq_chip_data(irq, g);
set_irq_handler(irq, handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
+
+ binten |= BIT(bank);
}
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
- __raw_writel(0x1f, (void *__iomem)
+ __raw_writel(binten, (void *__iomem)
IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
-
arch_initcall(davinci_gpio_irq_setup);
#include <linux/init.h>
#include <linux/io.h>
-#define JTAG_ID_BASE 0x01c40028
+#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
+
+static unsigned int davinci_revision;
struct davinci_id {
u8 variant; /* JTAG ID bits 31:28 */
.manufacturer = 0x017,
.type = 0x64460000,
},
+ {
+ /* DM646X */
+ .part_no = 0xb770,
+ .variant = 0x0,
+ .manufacturer = 0x017,
+ .type = 0x64670000,
+ },
+ {
+ /* DM355 */
+ .part_no = 0xb73b,
+ .variant = 0x0,
+ .manufacturer = 0x00f,
+ .type = 0x03550000,
+ },
};
/*
{
u32 dev_id, part_no;
- dev_id = davinci_readl(JTAG_ID_BASE);
+ dev_id = __raw_readl(JTAG_ID_BASE);
part_no = ((dev_id >> 12) & 0xffff);
{
u32 variant;
- variant = davinci_readl(JTAG_ID_BASE);
+ variant = __raw_readl(JTAG_ID_BASE);
variant = (variant >> 28) & 0xf;
return variant;
}
+unsigned int davinci_rev(void)
+{
+ return davinci_revision >> 16;
+}
+EXPORT_SYMBOL(davinci_rev);
+
void __init davinci_check_revision(void)
{
int i;
/* First check only the major version in a safe way */
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == (davinci_ids[i].part_no)) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == davinci_ids[i].part_no &&
variant == davinci_ids[i].variant) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
- printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+ printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
+ davinci_rev(), variant);
}
--- /dev/null
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE 0x01E02000
+#define DAVINCI_ASP1_BASE 0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX 2
+#define DAVINCI_DMA_ASP0_RX 3
+#define DAVINCI_DMA_ASP1_TX 8
+#define DAVINCI_DMA_ASP1_RX 9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */
--- /dev/null
+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif
--- /dev/null
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+ return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
extern int clk_register(struct clk *clk);
extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
#endif
extern struct sys_timer davinci_timer;
+extern void davinci_irq_init(void);
+extern void davinci_map_common_io(void);
+
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
--- /dev/null
+/*
+ * DaVinci CPU type detection
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Defines the cpu_is_*() macros for runtime detection of DaVinci
+ * device type. In addtion, if support for a given device is not
+ * compiled in to the kernel, the macros return 0 so that
+ * resulting code can be optimized out.
+ *
+ * 2009 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+extern unsigned int davinci_rev(void);
+
+#define IS_DAVINCI_CPU(type, id) \
+static inline int is_davinci_dm ##type(void) \
+{ \
+ return (davinci_rev() == (id)) ? 1 : 0; \
+}
+
+IS_DAVINCI_CPU(644x, 0x6446)
+IS_DAVINCI_CPU(646x, 0x6467)
+IS_DAVINCI_CPU(355, 0x355)
+
+#ifdef CONFIG_ARCH_DAVINCI_DM644x
+#define cpu_is_davinci_dm644x() is_davinci_dm644x()
+#else
+#define cpu_is_davinci_dm644x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM646x
+#define cpu_is_davinci_dm646x() is_davinci_dm646x()
+#else
+#define cpu_is_davinci_dm646x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM355
+#define cpu_is_davinci_dm355() is_davinci_dm355()
+#else
+#define cpu_is_davinci_dm355() 0
+#endif
+
+#endif
--- /dev/null
+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_DM644X_H
+#define __ASM_ARCH_DM644X_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define DM644X_EMAC_BASE (0x01C80000)
+#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
+#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
+#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
+#define DM644X_EMAC_MDIO_OFFSET (0x4000)
+#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
+
+void __init dm644x_init(void);
+
+#endif /* __ASM_ARCH_DM644X_H */
--- /dev/null
+/*
+ * TI DAVINCI dma definitions
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ * Channel Triggers transfers, usually from a hardware event but
+ * also manually or by "chaining" from DMA completions.
+ * Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ * "set"), source and destination addresses, a link to a
+ * next PaRAM slot (if any), options for the transfer, and
+ * instructions for updating those addresses. There are
+ * more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers. An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers. When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining). The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface. (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+ unsigned int opt;
+ unsigned int src;
+ unsigned int a_b_cnt;
+ unsigned int dst;
+ unsigned int src_dst_bidx;
+ unsigned int link_bcntrld;
+ unsigned int src_dst_cidx;
+ unsigned int ccnt;
+};
+
+#define CCINT0_INTERRUPT 16
+#define CCERRINT_INTERRUPT 17
+#define TCERRINT0_INTERRUPT 18
+#define TCERRINT1_INTERRUPT 19
+
+/* fields in edmacc_param.opt */
+#define SAM BIT(0)
+#define DAM BIT(1)
+#define SYNCDIM BIT(2)
+#define STATIC BIT(3)
+#define EDMA_FWID (0x07 << 8)
+#define TCCMODE BIT(11)
+#define EDMA_TCC(t) ((t) << 12)
+#define TCINTEN BIT(20)
+#define ITCINTEN BIT(21)
+#define TCCHEN BIT(22)
+#define ITCCHEN BIT(23)
+
+#define TRWORD (0x7<<2)
+#define PAENTRY (0x1ff<<5)
+
+/* Drivers should avoid using these symbolic names for dm644x
+ * channels, and use platform_device IORESOURCE_DMA resources
+ * instead. (Other DaVinci chips have different peripherals
+ * and thus have different DMA channel mappings.)
+ */
+#define DAVINCI_DMA_MCBSP_TX 2
+#define DAVINCI_DMA_MCBSP_RX 3
+#define DAVINCI_DMA_VPSS_HIST 4
+#define DAVINCI_DMA_VPSS_H3A 5
+#define DAVINCI_DMA_VPSS_PRVU 6
+#define DAVINCI_DMA_VPSS_RSZ 7
+#define DAVINCI_DMA_IMCOP_IMXINT 8
+#define DAVINCI_DMA_IMCOP_VLCDINT 9
+#define DAVINCI_DMA_IMCO_PASQINT 10
+#define DAVINCI_DMA_IMCOP_DSQINT 11
+#define DAVINCI_DMA_SPI_SPIX 16
+#define DAVINCI_DMA_SPI_SPIR 17
+#define DAVINCI_DMA_UART0_URXEVT0 18
+#define DAVINCI_DMA_UART0_UTXEVT0 19
+#define DAVINCI_DMA_UART1_URXEVT1 20
+#define DAVINCI_DMA_UART1_UTXEVT1 21
+#define DAVINCI_DMA_UART2_URXEVT2 22
+#define DAVINCI_DMA_UART2_UTXEVT2 23
+#define DAVINCI_DMA_MEMSTK_MSEVT 24
+#define DAVINCI_DMA_MMCRXEVT 26
+#define DAVINCI_DMA_MMCTXEVT 27
+#define DAVINCI_DMA_I2C_ICREVT 28
+#define DAVINCI_DMA_I2C_ICXEVT 29
+#define DAVINCI_DMA_GPIO_GPINT0 32
+#define DAVINCI_DMA_GPIO_GPINT1 33
+#define DAVINCI_DMA_GPIO_GPINT2 34
+#define DAVINCI_DMA_GPIO_GPINT3 35
+#define DAVINCI_DMA_GPIO_GPINT4 36
+#define DAVINCI_DMA_GPIO_GPINT5 37
+#define DAVINCI_DMA_GPIO_GPINT6 38
+#define DAVINCI_DMA_GPIO_GPINT7 39
+#define DAVINCI_DMA_GPIO_GPBNKINT0 40
+#define DAVINCI_DMA_GPIO_GPBNKINT1 41
+#define DAVINCI_DMA_GPIO_GPBNKINT2 42
+#define DAVINCI_DMA_GPIO_GPBNKINT3 43
+#define DAVINCI_DMA_GPIO_GPBNKINT4 44
+#define DAVINCI_DMA_TIMER0_TINT0 48
+#define DAVINCI_DMA_TIMER1_TINT1 49
+#define DAVINCI_DMA_TIMER2_TINT2 50
+#define DAVINCI_DMA_TIMER3_TINT3 51
+#define DAVINCI_DMA_PWM0 52
+#define DAVINCI_DMA_PWM1 53
+#define DAVINCI_DMA_PWM2 54
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+ INCR = 0,
+ FIFO = 1
+};
+
+enum fifo_width {
+ W8BIT = 0,
+ W16BIT = 1,
+ W32BIT = 2,
+ W64BIT = 3,
+ W128BIT = 4,
+ W256BIT = 5
+};
+
+enum dma_event_q {
+ EVENTQ_0 = 0,
+ EVENTQ_1 = 1,
+ EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+ ASYNC = 0,
+ ABSYNC = 1
+};
+
+#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(int slot);
+void edma_free_slot(unsigned slot);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+/* UNRELATED TO DMA */
+int davinci_alloc_iram(unsigned size);
+void davinci_free_iram(unsigned addr, unsigned size);
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+ /* how many dma resources of each type */
+ unsigned n_channel;
+ unsigned n_region;
+ unsigned n_slot;
+ unsigned n_tc;
+
+ /* list of channels with no even trigger; terminated by "-1" */
+ const s8 *noevent;
+};
+
+#endif
#include <linux/io.h>
#include <asm-generic/gpio.h>
-#include <mach/hardware.h>
+
#include <mach/irqs.h>
+#define DAVINCI_GPIO_BASE 0x01C67000
+
/*
* basic gpio routines
*
* go through boot loaders.
*
* the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * need to pay attention to PINMUX registers to be sure those pins are
* used as gpios, not with other peripherals.
*
* On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code should write GPIO(N) or:
- * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
*
* GPIOs can also be on external chips, numbered after the ones built-in
* to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
-#define GPIO(X) (X) /* 0 <= X <= 70 */
-#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
-#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
struct gpio_controller {
u32 dir;
{
void *__iomem ptr;
- if (gpio < 32)
+ if (gpio < 32 * 1)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
- else if (gpio < 64)
+ else if (gpio < 32 * 2)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
- else if (gpio < DAVINCI_N_GPIO)
+ else if (gpio < 32 * 3)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ else if (gpio < 32 * 4)
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
else
ptr = NULL;
return ptr;
/*
- * Common hardware definitions
+ * Hardware definitions common to all DaVinci family processors
*
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Author: Kevin Hilman, Deep Root Systems, LLC
*
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
#define __ASM_ARCH_HARDWARE_H
/*
- * Base register addresses
+ * Before you add anything to ths file:
+ *
+ * This header is for defines common to ALL DaVinci family chips.
+ * Anything that is chip specific should go in <chipname>.h,
+ * and the chip/board init code should then explicitly include
+ * <chipname>.h
*/
-#define DAVINCI_DMA_3PCC_BASE (0x01C00000)
-#define DAVINCI_DMA_3PTC0_BASE (0x01C10000)
-#define DAVINCI_DMA_3PTC1_BASE (0x01C10400)
-#define DAVINCI_I2C_BASE (0x01C21000)
-#define DAVINCI_PWM0_BASE (0x01C22000)
-#define DAVINCI_PWM1_BASE (0x01C22400)
-#define DAVINCI_PWM2_BASE (0x01C22800)
-#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000)
-#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800)
-#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00)
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000)
-#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000)
-#define DAVINCI_IEEE1394_BASE (0x01C60000)
-#define DAVINCI_USB_OTG_BASE (0x01C64000)
-#define DAVINCI_CFC_ATA_BASE (0x01C66000)
-#define DAVINCI_SPI_BASE (0x01C66800)
-#define DAVINCI_GPIO_BASE (0x01C67000)
-#define DAVINCI_UHPI_BASE (0x01C67800)
-#define DAVINCI_VPSS_REGS_BASE (0x01C70000)
-#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000)
-#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000)
-#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000)
-#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000)
-#define DAVINCI_IMCOP_BASE (0x01CC0000)
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000)
-#define DAVINCI_VLYNQ_BASE (0x01E01000)
-#define DAVINCI_MCBSP_BASE (0x01E02000)
-#define DAVINCI_MMC_SD_BASE (0x01E10000)
-#define DAVINCI_MS_BASE (0x01E20000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
-#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000)
+#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000
+
+/* System control register offsets */
+#define DM64XX_VDD3P3V_PWDN 0x48
#endif /* __ASM_ARCH_HARDWARE_H */
#else
#define IOMEM(x) ((void __force __iomem *)(x))
-/*
- * Functions to access the DaVinci IO region
- *
- * NOTE: - Use davinci_read/write[bwl] for physical register addresses
- * - Use __raw_read/write[bwl]() for virtual register addresses
- * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- * - DO NOT use hardcoded virtual addresses to allow changing the
- * IO address space again if needed
- */
-#define davinci_readb(a) __raw_readb(IO_ADDRESS(a))
-#define davinci_readw(a) __raw_readw(IO_ADDRESS(a))
-#define davinci_readl(a) __raw_readl(IO_ADDRESS(a))
+#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t)
+#define __arch_iounmap(v) davinci_iounmap(v)
-#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a))
-#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a))
-#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a))
+void __iomem *davinci_ioremap(unsigned long phys, size_t size,
+ unsigned int type);
+void davinci_iounmap(volatile void __iomem *addr);
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_IO_H */
#define IRQ_EMUINT 63
#define DAVINCI_N_AINTC_IRQ 64
-#define DAVINCI_N_GPIO 71
+#define DAVINCI_N_GPIO 104
#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
+/* DaVinci DM6467-specific Interrupts */
+#define IRQ_DM646X_VP_VERTINT0 0
+#define IRQ_DM646X_VP_VERTINT1 1
+#define IRQ_DM646X_VP_VERTINT2 2
+#define IRQ_DM646X_VP_VERTINT3 3
+#define IRQ_DM646X_VP_ERRINT 4
+#define IRQ_DM646X_RESERVED_1 5
+#define IRQ_DM646X_RESERVED_2 6
+#define IRQ_DM646X_WDINT 7
+#define IRQ_DM646X_CRGENINT0 8
+#define IRQ_DM646X_CRGENINT1 9
+#define IRQ_DM646X_TSIFINT0 10
+#define IRQ_DM646X_TSIFINT1 11
+#define IRQ_DM646X_VDCEINT 12
+#define IRQ_DM646X_USBINT 13
+#define IRQ_DM646X_USBDMAINT 14
+#define IRQ_DM646X_PCIINT 15
+#define IRQ_DM646X_TCERRINT2 20
+#define IRQ_DM646X_TCERRINT3 21
+#define IRQ_DM646X_IDE 22
+#define IRQ_DM646X_HPIINT 23
+#define IRQ_DM646X_EMACRXTHINT 24
+#define IRQ_DM646X_EMACRXINT 25
+#define IRQ_DM646X_EMACTXINT 26
+#define IRQ_DM646X_EMACMISCINT 27
+#define IRQ_DM646X_MCASP0TXINT 28
+#define IRQ_DM646X_MCASP0RXINT 29
+#define IRQ_DM646X_RESERVED_3 31
+#define IRQ_DM646X_MCASP1TXINT 32
+#define IRQ_DM646X_VLQINT 38
+#define IRQ_DM646X_UARTINT2 42
+#define IRQ_DM646X_SPINT0 43
+#define IRQ_DM646X_SPINT1 44
+#define IRQ_DM646X_DSP2ARMINT 45
+#define IRQ_DM646X_RESERVED_4 46
+#define IRQ_DM646X_PSCINT 47
+#define IRQ_DM646X_GPIO0 48
+#define IRQ_DM646X_GPIO1 49
+#define IRQ_DM646X_GPIO2 50
+#define IRQ_DM646X_GPIO3 51
+#define IRQ_DM646X_GPIO4 52
+#define IRQ_DM646X_GPIO5 53
+#define IRQ_DM646X_GPIO6 54
+#define IRQ_DM646X_GPIO7 55
+#define IRQ_DM646X_GPIOBNK0 56
+#define IRQ_DM646X_GPIOBNK1 57
+#define IRQ_DM646X_GPIOBNK2 58
+#define IRQ_DM646X_DDRINT 59
+#define IRQ_DM646X_AEMIFINT 60
+
+/* DaVinci DM355-specific Interrupts */
+#define IRQ_DM355_CCDC_VDINT0 0
+#define IRQ_DM355_CCDC_VDINT1 1
+#define IRQ_DM355_CCDC_VDINT2 2
+#define IRQ_DM355_IPIPE_HST 3
+#define IRQ_DM355_H3AINT 4
+#define IRQ_DM355_IPIPE_SDR 5
+#define IRQ_DM355_IPIPEIFINT 6
+#define IRQ_DM355_OSDINT 7
+#define IRQ_DM355_VENCINT 8
+#define IRQ_DM355_IMCOPINT 11
+#define IRQ_DM355_RTOINT 13
+#define IRQ_DM355_TINT4 13
+#define IRQ_DM355_TINT2_TINT12 13
+#define IRQ_DM355_UARTINT2 14
+#define IRQ_DM355_TINT5 14
+#define IRQ_DM355_TINT2_TINT34 14
+#define IRQ_DM355_TINT6 15
+#define IRQ_DM355_TINT3_TINT12 15
+#define IRQ_DM355_SPINT1_0 17
+#define IRQ_DM355_SPINT1_1 18
+#define IRQ_DM355_SPINT2_0 19
+#define IRQ_DM355_SPINT2_1 21
+#define IRQ_DM355_TINT7 22
+#define IRQ_DM355_TINT3_TINT34 22
+#define IRQ_DM355_SDIOINT0 23
+#define IRQ_DM355_MMCINT0 26
+#define IRQ_DM355_MSINT 26
+#define IRQ_DM355_MMCINT1 27
+#define IRQ_DM355_PWMINT3 28
+#define IRQ_DM355_SDIOINT1 31
+#define IRQ_DM355_SPINT0_0 42
+#define IRQ_DM355_SPINT0_1 43
+#define IRQ_DM355_GPIO0 44
+#define IRQ_DM355_GPIO1 45
+#define IRQ_DM355_GPIO2 46
+#define IRQ_DM355_GPIO3 47
+#define IRQ_DM355_GPIO4 48
+#define IRQ_DM355_GPIO5 49
+#define IRQ_DM355_GPIO6 50
+#define IRQ_DM355_GPIO7 51
+#define IRQ_DM355_GPIO8 52
+#define IRQ_DM355_GPIO9 53
+#define IRQ_DM355_GPIOBNK0 54
+#define IRQ_DM355_GPIOBNK1 55
+#define IRQ_DM355_GPIOBNK2 56
+#define IRQ_DM355_GPIOBNK3 57
+#define IRQ_DM355_GPIOBNK4 58
+#define IRQ_DM355_GPIOBNK5 59
+#define IRQ_DM355_GPIOBNK6 60
+
#endif /* __ASM_ARCH_IRQS_H */
/*
- * DaVinci pin multiplexing defines
+ * Table of the DAVINCI register configurations for the PINMUX combinations
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/include/asm-arm/arch-omap/mux.h:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define DAVINCI_MUX_AEAW0 0
-#define DAVINCI_MUX_AEAW1 1
-#define DAVINCI_MUX_AEAW2 2
-#define DAVINCI_MUX_AEAW3 3
-#define DAVINCI_MUX_AEAW4 4
-#define DAVINCI_MUX_AECS4 10
-#define DAVINCI_MUX_AECS5 11
-#define DAVINCI_MUX_VLYNQWD0 12
-#define DAVINCI_MUX_VLYNQWD1 13
-#define DAVINCI_MUX_VLSCREN 14
-#define DAVINCI_MUX_VLYNQEN 15
-#define DAVINCI_MUX_HDIREN 16
-#define DAVINCI_MUX_ATAEN 17
-#define DAVINCI_MUX_RGB666 22
-#define DAVINCI_MUX_RGB888 23
-#define DAVINCI_MUX_LOEEN 24
-#define DAVINCI_MUX_LFLDEN 25
-#define DAVINCI_MUX_CWEN 26
-#define DAVINCI_MUX_CFLDEN 27
-#define DAVINCI_MUX_HPIEN 29
-#define DAVINCI_MUX_1394EN 30
-#define DAVINCI_MUX_EMACEN 31
-
-#define DAVINCI_MUX_LEVEL2 32
-#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0)
-#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1)
-#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2)
-#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3)
-#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4)
-#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5)
-#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6)
-#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7)
-#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8)
-#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9)
-#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10)
-#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16)
-#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17)
-#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18)
-
-extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
-
-#endif /* __ASM_ARCH_MUX_H */
+
+#ifndef __INC_MACH_MUX_H
+#define __INC_MACH_MUX_H
+
+/* System module registers */
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+/* dm355 only */
+#define PINMUX2 0x08
+#define PINMUX3 0x0c
+#define PINMUX4 0x10
+#define INTMUX 0x18
+#define EVTMUX 0x1c
+
+struct mux_config {
+ const char *name;
+ const char *mux_reg_name;
+ const unsigned char mux_reg;
+ const unsigned char mask_offset;
+ const unsigned char mask;
+ const unsigned char mode;
+ bool debug;
+};
+
+enum davinci_dm644x_index {
+ /* ATA and HDDIR functions */
+ DM644X_HDIREN,
+ DM644X_ATAEN,
+ DM644X_ATAEN_DISABLE,
+
+ /* HPI functions */
+ DM644X_HPIEN_DISABLE,
+
+ /* AEAW functions */
+ DM644X_AEAW,
+
+ /* Memory Stick */
+ DM644X_MSTK,
+
+ /* I2C */
+ DM644X_I2C,
+
+ /* ASP function */
+ DM644X_MCBSP,
+
+ /* UART1 */
+ DM644X_UART1,
+
+ /* UART2 */
+ DM644X_UART2,
+
+ /* PWM0 */
+ DM644X_PWM0,
+
+ /* PWM1 */
+ DM644X_PWM1,
+
+ /* PWM2 */
+ DM644X_PWM2,
+
+ /* VLYNQ function */
+ DM644X_VLYNQEN,
+ DM644X_VLSCREN,
+ DM644X_VLYNQWD,
+
+ /* EMAC and MDIO function */
+ DM644X_EMACEN,
+
+ /* GPIO3V[0:16] pins */
+ DM644X_GPIO3V,
+
+ /* GPIO pins */
+ DM644X_GPIO0,
+ DM644X_GPIO3,
+ DM644X_GPIO43_44,
+ DM644X_GPIO46_47,
+
+ /* VPBE */
+ DM644X_RGB666,
+
+ /* LCD */
+ DM644X_LOEEN,
+ DM644X_LFLDEN,
+};
+
+enum davinci_dm646x_index {
+ /* ATA function */
+ DM646X_ATAEN,
+
+ /* AUDIO Clock */
+ DM646X_AUDCK1,
+ DM646X_AUDCK0,
+
+ /* CRGEN Control */
+ DM646X_CRGMUX,
+
+ /* VPIF Control */
+ DM646X_STSOMUX_DISABLE,
+ DM646X_STSIMUX_DISABLE,
+ DM646X_PTSOMUX_DISABLE,
+ DM646X_PTSIMUX_DISABLE,
+
+ /* TSIF Control */
+ DM646X_STSOMUX,
+ DM646X_STSIMUX,
+ DM646X_PTSOMUX_PARALLEL,
+ DM646X_PTSIMUX_PARALLEL,
+ DM646X_PTSOMUX_SERIAL,
+ DM646X_PTSIMUX_SERIAL,
+};
+
+enum davinci_dm355_index {
+ /* MMC/SD 0 */
+ DM355_MMCSD0,
+
+ /* MMC/SD 1 */
+ DM355_SD1_CLK,
+ DM355_SD1_CMD,
+ DM355_SD1_DATA3,
+ DM355_SD1_DATA2,
+ DM355_SD1_DATA1,
+ DM355_SD1_DATA0,
+
+ /* I2C */
+ DM355_I2C_SDA,
+ DM355_I2C_SCL,
+
+ /* ASP0 function */
+ DM355_MCBSP0_BDX,
+ DM355_MCBSP0_X,
+ DM355_MCBSP0_BFSX,
+ DM355_MCBSP0_BDR,
+ DM355_MCBSP0_R,
+ DM355_MCBSP0_BFSR,
+
+ /* SPI0 */
+ DM355_SPI0_SDI,
+ DM355_SPI0_SDENA0,
+ DM355_SPI0_SDENA1,
+
+ /* IRQ muxing */
+ DM355_INT_EDMA_CC,
+ DM355_INT_EDMA_TC0_ERR,
+ DM355_INT_EDMA_TC1_ERR,
+
+ /* EDMA event muxing */
+ DM355_EVT8_ASP1_TX,
+ DM355_EVT9_ASP1_RX,
+ DM355_EVT26_MMC0_RX,
+};
+
+#ifdef CONFIG_DAVINCI_MUX
+/* setup pin muxing */
+extern void davinci_mux_init(void);
+extern int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size);
+extern int davinci_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
+static inline void davinci_mux_init(void) {}
+static inline int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size) { return 0; }
+static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif /* __INC_MACH_MUX_H */
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
-#define DAVINCI_LPSC_MDIO 7
-#define DAVINCI_LPSC_IEEE1394 8
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
-#define DAVINCI_LPSC_MEMSTICK 16
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
+#define DM355_LPSC_TIMER3 5
+#define DM355_LPSC_SPI1 6
+#define DM355_LPSC_MMC_SD1 7
+#define DM355_LPSC_McBSP1 8
+#define DM355_LPSC_PWM3 10
+#define DM355_LPSC_SPI2 11
+#define DM355_LPSC_RTO 12
+#define DM355_LPSC_VPSS_DAC 41
+
+/*
+ * LPSC Assignments
+ */
+#define DM646X_LPSC_ARM 0
+#define DM646X_LPSC_C64X_CPU 1
+#define DM646X_LPSC_HDVICP0 2
+#define DM646X_LPSC_HDVICP1 3
+#define DM646X_LPSC_TPCC 4
+#define DM646X_LPSC_TPTC0 5
+#define DM646X_LPSC_TPTC1 6
+#define DM646X_LPSC_TPTC2 7
+#define DM646X_LPSC_TPTC3 8
+#define DM646X_LPSC_PCI 13
+#define DM646X_LPSC_EMAC 14
+#define DM646X_LPSC_VDCE 15
+#define DM646X_LPSC_VPSSMSTR 16
+#define DM646X_LPSC_VPSSSLV 17
+#define DM646X_LPSC_TSIF0 18
+#define DM646X_LPSC_TSIF1 19
+#define DM646X_LPSC_DDR_EMIF 20
+#define DM646X_LPSC_AEMIF 21
+#define DM646X_LPSC_McASP0 22
+#define DM646X_LPSC_McASP1 23
+#define DM646X_LPSC_CRGEN0 24
+#define DM646X_LPSC_CRGEN1 25
+#define DM646X_LPSC_UART0 26
+#define DM646X_LPSC_UART1 27
+#define DM646X_LPSC_UART2 28
+#define DM646X_LPSC_PWM0 29
+#define DM646X_LPSC_PWM1 30
+#define DM646X_LPSC_I2C 31
+#define DM646X_LPSC_SPI 32
+#define DM646X_LPSC_GPIO 33
+#define DM646X_LPSC_TIMER0 34
+#define DM646X_LPSC_TIMER1 35
+#define DM646X_LPSC_ARM_INTC 45
+
+extern int davinci_psc_is_clk_active(unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int id,
+ char enable);
+
#endif /* __ASM_ARCH_PSC_H */
#include <mach/io.h>
-#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+#define DAVINCI_MAX_NR_UARTS 3
+#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+
+#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+
+/* DaVinci UART register offsets */
+#define UART_DAVINCI_PWREMU 0x0c
+#define UART_DM646X_SCR 0x10
+#define UART_DM646X_SCR_TX_WATERMARK 0x08
+
+struct davinci_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+extern void davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */
davinci_check_revision();
}
-void __init davinci_init_common_hw(void)
+#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
+#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+ if (BETWEEN(p, IO_PHYS, IO_SIZE))
+ return XLATE(p, IO_PHYS, IO_VIRT);
+
+ return __arm_ioremap(p, size, type);
+}
+EXPORT_SYMBOL(davinci_ioremap);
+
+void davinci_iounmap(volatile void __iomem *addr)
{
- davinci_clk_init();
+ unsigned long virt = (unsigned long)addr;
+
+ if (virt >= VMALLOC_START && virt < VMALLOC_END)
+ __iounmap(addr);
}
+EXPORT_SYMBOL(davinci_iounmap);
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/cputype.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
+const u8 *davinci_def_priorities;
+
+#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+
static inline unsigned int davinci_irq_readl(int offset)
{
- return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
+ return __raw_readl(INTC_BASE + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
- davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
+ __raw_writel(value, INTC_BASE + offset);
}
/* Disable interrupt */
.unmask = davinci_unmask_irq,
};
-
/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
+static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_VDINT0] = 2,
[IRQ_VDINT1] = 6,
[IRQ_VDINT2] = 6,
[IRQ_EMUINT] = 7,
};
+static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM646X_VP_VERTINT0] = 7,
+ [IRQ_DM646X_VP_VERTINT1] = 7,
+ [IRQ_DM646X_VP_VERTINT2] = 7,
+ [IRQ_DM646X_VP_VERTINT3] = 7,
+ [IRQ_DM646X_VP_ERRINT] = 7,
+ [IRQ_DM646X_RESERVED_1] = 7,
+ [IRQ_DM646X_RESERVED_2] = 7,
+ [IRQ_DM646X_WDINT] = 7,
+ [IRQ_DM646X_CRGENINT0] = 7,
+ [IRQ_DM646X_CRGENINT1] = 7,
+ [IRQ_DM646X_TSIFINT0] = 7,
+ [IRQ_DM646X_TSIFINT1] = 7,
+ [IRQ_DM646X_VDCEINT] = 7,
+ [IRQ_DM646X_USBINT] = 7,
+ [IRQ_DM646X_USBDMAINT] = 7,
+ [IRQ_DM646X_PCIINT] = 7,
+ [IRQ_CCINT0] = 7, /* dma */
+ [IRQ_CCERRINT] = 7, /* dma */
+ [IRQ_TCERRINT0] = 7, /* dma */
+ [IRQ_TCERRINT] = 7, /* dma */
+ [IRQ_DM646X_TCERRINT2] = 7,
+ [IRQ_DM646X_TCERRINT3] = 7,
+ [IRQ_DM646X_IDE] = 7,
+ [IRQ_DM646X_HPIINT] = 7,
+ [IRQ_DM646X_EMACRXTHINT] = 7,
+ [IRQ_DM646X_EMACRXINT] = 7,
+ [IRQ_DM646X_EMACTXINT] = 7,
+ [IRQ_DM646X_EMACMISCINT] = 7,
+ [IRQ_DM646X_MCASP0TXINT] = 7,
+ [IRQ_DM646X_MCASP0RXINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM646X_RESERVED_3] = 7,
+ [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
+ [IRQ_TINT0_TINT34] = 7, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_DM646X_VLQINT] = 7,
+ [IRQ_I2C] = 7,
+ [IRQ_UARTINT0] = 7,
+ [IRQ_UARTINT1] = 7,
+ [IRQ_DM646X_UARTINT2] = 7,
+ [IRQ_DM646X_SPINT0] = 7,
+ [IRQ_DM646X_SPINT1] = 7,
+ [IRQ_DM646X_DSP2ARMINT] = 7,
+ [IRQ_DM646X_RESERVED_4] = 7,
+ [IRQ_DM646X_PSCINT] = 7,
+ [IRQ_DM646X_GPIO0] = 7,
+ [IRQ_DM646X_GPIO1] = 7,
+ [IRQ_DM646X_GPIO2] = 7,
+ [IRQ_DM646X_GPIO3] = 7,
+ [IRQ_DM646X_GPIO4] = 7,
+ [IRQ_DM646X_GPIO5] = 7,
+ [IRQ_DM646X_GPIO6] = 7,
+ [IRQ_DM646X_GPIO7] = 7,
+ [IRQ_DM646X_GPIOBNK0] = 7,
+ [IRQ_DM646X_GPIOBNK1] = 7,
+ [IRQ_DM646X_GPIOBNK2] = 7,
+ [IRQ_DM646X_DDRINT] = 7,
+ [IRQ_DM646X_AEMIFINT] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM355_CCDC_VDINT0] = 2,
+ [IRQ_DM355_CCDC_VDINT1] = 6,
+ [IRQ_DM355_CCDC_VDINT2] = 6,
+ [IRQ_DM355_IPIPE_HST] = 6,
+ [IRQ_DM355_H3AINT] = 6,
+ [IRQ_DM355_IPIPE_SDR] = 6,
+ [IRQ_DM355_IPIPEIFINT] = 6,
+ [IRQ_DM355_OSDINT] = 7,
+ [IRQ_DM355_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_DM355_RTOINT] = 4,
+ [IRQ_DM355_UARTINT2] = 7,
+ [IRQ_DM355_TINT6] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_DM355_SPINT2_1] = 7,
+ [IRQ_DM355_TINT7] = 4,
+ [IRQ_DM355_SDIOINT0] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_DM355_MMCINT1] = 7,
+ [IRQ_DM355_PWMINT3] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM355_SDIOINT1] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_DM355_SPINT0_0] = 3,
+ [IRQ_DM355_SPINT0_1] = 3,
+ [IRQ_DM355_GPIO0] = 3,
+ [IRQ_DM355_GPIO1] = 7,
+ [IRQ_DM355_GPIO2] = 4,
+ [IRQ_DM355_GPIO3] = 4,
+ [IRQ_DM355_GPIO4] = 7,
+ [IRQ_DM355_GPIO5] = 7,
+ [IRQ_DM355_GPIO6] = 7,
+ [IRQ_DM355_GPIO7] = 7,
+ [IRQ_DM355_GPIO8] = 7,
+ [IRQ_DM355_GPIO9] = 7,
+ [IRQ_DM355_GPIOBNK0] = 7,
+ [IRQ_DM355_GPIOBNK1] = 7,
+ [IRQ_DM355_GPIOBNK2] = 7,
+ [IRQ_DM355_GPIOBNK3] = 7,
+ [IRQ_DM355_GPIOBNK4] = 7,
+ [IRQ_DM355_GPIOBNK5] = 7,
+ [IRQ_DM355_GPIOBNK6] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
- const u8 *priority = default_priorities;
+
+ if (cpu_is_davinci_dm644x())
+ davinci_def_priorities = dm644x_default_priorities;
+ else if (cpu_is_davinci_dm646x())
+ davinci_def_priorities = dm646x_default_priorities;
+ else if (cpu_is_davinci_dm355())
+ davinci_def_priorities = dm355_default_priorities;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
unsigned j;
u32 pri;
- for (j = 0, pri = 0; j < 32; j += 4, priority++)
- pri |= (*priority & 0x07) << j;
+ for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
+ pri |= (*davinci_def_priorities & 0x07) << j;
davinci_irq_writel(pri, i);
}
/*
- * DaVinci pin multiplexing configurations
+ * Utility to set the DAVINCI MUX register from a table in mux.h
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/arch/arm/plat-omap/mux.c:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
-
#include <mach/mux.h>
-/* System control register offsets */
-#define PINMUX0 0x00
-#define PINMUX1 0x04
+static const struct mux_config *mux_table;
+static unsigned long pin_table_sz;
+
+int __init davinci_mux_register(const struct mux_config *pins,
+ unsigned long size)
+{
+ mux_table = pins;
+ pin_table_sz = size;
-static DEFINE_SPINLOCK(mux_lock);
+ return 0;
+}
-void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
+/*
+ * Sets the DAVINCI MUX register based on the table
+ */
+int __init_or_module davinci_cfg_reg(const unsigned long index)
{
- u32 pinmux, muxreg = PINMUX0;
+ static DEFINE_SPINLOCK(mux_spin_lock);
+ void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+ unsigned long flags;
+ const struct mux_config *cfg;
+ unsigned int reg_orig = 0, reg = 0;
+ unsigned int mask, warn = 0;
+
+ if (!mux_table)
+ BUG();
+
+ if (index >= pin_table_sz) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, pin_table_sz);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ cfg = &mux_table[index];
+
+ if (cfg->name == NULL) {
+ printk(KERN_ERR "No entry for the specified index\n");
+ return -ENODEV;
+ }
+
+ /* Update the mux register in question */
+ if (cfg->mask) {
+ unsigned tmp1, tmp2;
+
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ reg_orig = __raw_readl(base + cfg->mux_reg);
+
+ mask = (cfg->mask << cfg->mask_offset);
+ tmp1 = reg_orig & mask;
+ reg = reg_orig & ~mask;
+
+ tmp2 = (cfg->mode << cfg->mask_offset);
+ reg |= tmp2;
+
+ if (tmp1 != tmp2)
+ warn = 1;
+
+ __raw_writel(reg, base + cfg->mux_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+ }
+
+ if (warn) {
+#ifdef CONFIG_DAVINCI_MUX_WARNINGS
+ printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+ }
- if (mux >= DAVINCI_MUX_LEVEL2) {
- muxreg = PINMUX1;
- mux -= DAVINCI_MUX_LEVEL2;
+#ifdef CONFIG_DAVINCI_MUX_DEBUG
+ if (cfg->debug || warn) {
+ printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
+ printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
}
+#endif
- spin_lock(&mux_lock);
- pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- if (enable)
- pinmux |= (1 << mux);
- else
- pinmux &= ~(1 << mux);
- davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- spin_unlock(&mux_lock);
+ return 0;
}
+EXPORT_SYMBOL(davinci_cfg_reg);
--- /dev/null
+/*
+ * Pin-multiplex helper macros for TI DaVinci family devices
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ */
+#ifndef _MACH_DAVINCI_MUX_H_
+#define _MACH_DAVINCI_MUX_H_
+
+#include <mach/mux.h>
+
+#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "PINMUX"#muxreg, \
+ .mux_reg = PINMUX##muxreg, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "INTMUX", \
+ .mux_reg = INTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "EVTMUX", \
+ .mux_reg = EVTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#endif /* _MACH_DAVINCI_MUX_H */
#include <linux/init.h>
#include <linux/io.h>
+#include <mach/cputype.h>
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/mux.h>
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
+
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
#define MDSTAT 0x800
#define MDCTL 0xA00
-/* System control register offsets */
-#define VDD3P3V_PWDN 0x48
+#define MDSTAT_STATE_MASK 0x1f
-static void davinci_psc_mux(unsigned int id)
+/* Return nonzero iff the domain's clock is active */
+int __init davinci_psc_is_clk_active(unsigned int id)
{
- switch (id) {
- case DAVINCI_LPSC_ATA:
- davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1);
- davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1);
- break;
- case DAVINCI_LPSC_MMC_SD:
- /* VDD power manupulations are done in U-Boot for CPMAC
- * so applies to MMC as well
- */
- /*Set up the pull regiter for MMC */
- davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN);
- davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0);
- break;
- case DAVINCI_LPSC_I2C:
- davinci_mux_peripheral(DAVINCI_MUX_I2C, 1);
- break;
- case DAVINCI_LPSC_McBSP:
- davinci_mux_peripheral(DAVINCI_MUX_ASP, 1);
- break;
- default:
- break;
- }
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+
+ /* if clocked, state can be "Enable" or "SyncReset" */
+ return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
{
- u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
+ u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
- mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
- if (enable)
- mdctl |= 0x00000003; /* Enable Module */
- else
- mdctl &= 0xFFFFFFF2; /* Disable Module */
- davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
+ mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
+ mdctl &= ~MDSTAT_STATE_MASK;
+ mdctl |= next_state;
+ __raw_writel(mdctl, psc_base + MDCTL + 4 * id);
- pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT);
+ pdstat = __raw_readl(psc_base + PDSTAT);
if ((pdstat & 0x00000001) == 0) {
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x1;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- EPCPR);
+ epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+ ptstat = __raw_readl(psc_base +
PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
} else {
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- PTSTAT);
+ ptstat = __raw_readl(psc_base + PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
}
- if (enable)
- mdstat_mask = 0x3;
- else
- mdstat_mask = 0x2;
-
do {
- mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- MDSTAT + 4 * id);
- } while (!((mdstat & 0x0000001F) == mdstat_mask));
-
- if (enable)
- davinci_psc_mux(id);
-}
-
-void __init davinci_psc_init(void)
-{
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
-
- /* Turn on WatchDog timer LPSC. Needed for RESET to work */
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
+ mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+ } while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
}
#include <mach/hardware.h>
#include <mach/serial.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include "clock.h"
-#define UART_DAVINCI_PWREMU 0x0c
-
-static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
- int offset)
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+ int offset)
{
offset <<= up->regshift;
- return (unsigned int)__raw_readb(up->membase + offset);
+ return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
}
-static inline void davinci_serial_outp(struct plat_serial8250_port *p,
- int offset, int value)
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+ int value)
{
offset <<= p->regshift;
- __raw_writeb(value, p->membase + offset);
+ __raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
- .mapbase = (unsigned long)DAVINCI_UART0_BASE,
+ .mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = 27000000,
},
{
.flags = 0
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
- /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
unsigned int pwremu = 0;
- davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
+ serial_write_reg(p, UART_IER, 0); /* disable all interrupts */
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
mdelay(10);
pwremu |= (0x3 << 13);
pwremu |= 0x1;
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+
+ if (cpu_is_davinci_dm646x())
+ serial_write_reg(p, UART_DM646X_SCR,
+ UART_DM646X_SCR_TX_WATERMARK);
+}
+
+void __init davinci_serial_init(struct davinci_uart_config *info)
+{
+ int i;
+ char name[16];
+ struct clk *uart_clk;
+ struct device *dev = &serial_device.dev;
+
+ /*
+ * Make sure the serial ports are muxed on at this point.
+ * You have to mux them off in device drivers later on
+ * if not needed.
+ */
+ for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
+ struct plat_serial8250_port *p = serial_platform_data + i;
+
+ if (!(info->enabled_uarts & (1 << i))) {
+ p->flags = 0;
+ continue;
+ }
+
+ if (cpu_is_davinci_dm646x())
+ p->iotype = UPIO_MEM32;
+
+ if (cpu_is_davinci_dm355()) {
+ if (i == 2) {
+ p->mapbase = (unsigned long)DM355_UART2_BASE;
+ p->irq = IRQ_DM355_UARTINT2;
+ }
+ }
+
+ sprintf(name, "uart%d", i);
+ uart_clk = clk_get(dev, name);
+ if (IS_ERR(uart_clk))
+ printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
+ __func__, __LINE__, i);
+ else {
+ clk_enable(uart_clk);
+ p->uartclk = clk_get_rate(uart_clk);
+ davinci_serial_reset(p);
+ }
+ }
}
static int __init davinci_init(void)
{
- davinci_serial_reset(&serial_platform_data[0]);
return platform_device_register(&serial_device);
}
#include <linux/clockchips.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/mach/time.h>
#include <asm/errno.h>
#include <mach/io.h>
+#include <mach/cputype.h>
+#include "clock.h"
static struct clock_event_device clockevent_davinci;
+static unsigned int davinci_clock_tick_rate;
#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
unsigned int id;
unsigned long period;
unsigned long opts;
- unsigned long reg_base;
- unsigned long tim_reg;
- unsigned long prd_reg;
+ void __iomem *base;
+ unsigned long tim_off;
+ unsigned long prd_off;
unsigned long enamode_shift;
struct irqaction irqaction;
};
static int timer32_config(struct timer_s *t)
{
- u32 tcr = davinci_readl(t->reg_base + TCR);
+ u32 tcr = __raw_readl(t->base + TCR);
/* disable timer */
tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
/* reset counter to zero, set new period */
- davinci_writel(0, t->tim_reg);
- davinci_writel(t->period, t->prd_reg);
+ __raw_writel(0, t->base + t->tim_off);
+ __raw_writel(t->period, t->base + t->prd_off);
/* Set enable mode */
if (t->opts & TIMER_OPTS_ONESHOT) {
tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
}
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
return 0;
}
static inline u32 timer32_read(struct timer_s *t)
{
- return davinci_readl(t->tim_reg);
+ return __raw_readl(t->base + t->tim_off);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
static void __init timer_init(void)
{
- u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
- u32 tgcr, base = bases[i];
+ u32 tgcr;
+ void __iomem *base = IO_ADDRESS(phys_bases[i]);
/* Disabled, Internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset both timers, no pre-scaler for timer34 */
tgcr = 0;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Set both timers to unchained 32-bit */
tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Unreset timers */
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Init both counters to zero */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
}
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
+ u32 phys_base;
if (t->name) {
t->id = i;
- t->reg_base = (IS_TIMER1(t->id) ?
+ phys_base = (IS_TIMER1(t->id) ?
DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
+ t->base = IO_ADDRESS(phys_base);
if (IS_TIMER_BOT(t->id)) {
t->enamode_shift = 6;
- t->tim_reg = t->reg_base + TIM12;
- t->prd_reg = t->reg_base + PRD12;
+ t->tim_off = TIM12;
+ t->prd_off = PRD12;
} else {
t->enamode_shift = 22;
- t->tim_reg = t->reg_base + TIM34;
- t->prd_reg = t->reg_base + PRD34;
+ t->tim_off = TIM34;
+ t->prd_off = PRD34;
}
/* Register interrupt */
/*
* clocksource
*/
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
{
struct timer_s *t = &timers[TID_CLOCKSOURCE];
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- t->period = CLOCK_TICK_RATE / (HZ);
+ t->period = davinci_clock_tick_rate / (HZ);
t->opts = TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
static void __init davinci_timer_init(void)
{
+ struct clk *timer_clk;
+
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
/* init timer hw */
timer_init();
+ timer_clk = clk_get(NULL, "timer0");
+ BUG_ON(IS_ERR(timer_clk));
+ clk_enable(timer_clk);
+
+ davinci_clock_tick_rate = clk_get_rate(timer_clk);
+
/* setup clocksource */
clocksource_davinci.mult =
- clocksource_khz2mult(CLOCK_TICK_RATE/1000,
+ clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
if (clocksource_register(&clocksource_davinci))
printk(err, clocksource_davinci.name);
/* setup clockevent */
- clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+ clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
/* reset board using watchdog timer */
void davinci_watchdog_reset(void) {
- u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
+ u32 tgcr, wdtcr;
+ void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
+ struct device dev;
+ struct clk *wd_clk;
+ char *name = "watchdog";
+
+ dev_set_name(&dev, name);
+ wd_clk = clk_get(&dev, NULL);
+ if (WARN_ON(IS_ERR(wd_clk)))
+ return;
+ clk_enable(wd_clk);
/* disable, internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset timer, set mode to 64-bit watchdog, and unreset */
tgcr = 0;
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
/* clear counter and period regs */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
- davinci_writel(0, base + PRD12);
- davinci_writel(0, base + PRD34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
+ __raw_writel(0, base + PRD12);
+ __raw_writel(0, base + PRD34);
/* enable */
- wdtcr = davinci_readl(base + WDTCR);
+ wdtcr = __raw_readl(base + WDTCR);
wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in pre-active state */
wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in active state */
wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* write an invalid value to the WDKEY field to trigger
* a watchdog reset */
wdtcr = 0x00004000;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
}
#include <mach/hardware.h>
#include <mach/irqs.h>
+#define DAVINCI_USB_OTG_BASE 0x01C64000
+
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
{ "ep1_tx", 8, },
#define TIMER4_TICKS_PER_JIFFY ((CLOCK_TICK_RATE + (HZ/2)) / HZ)
-static int ep93xx_timer_interrupt(int irq, void *dev_id)
+static irqreturn_t ep93xx_timer_interrupt(int irq, void *dev_id)
{
__raw_writel(1, EP93XX_TIMER1_CLEAR);
while ((signed long)
#ifndef _IMX_GPIO_H
#include <linux/kernel.h>
+#include <mach/hardware.h>
#include <mach/imx-regs.h>
#define IMX_GPIO_ALLOC_MODE_NORMAL 0
IMX_TCTL(TIMER_BASE) = TCTL_FRR | TCTL_CLK_PCLK1 | TCTL_TEN;
}
-cycle_t imx_get_cycles(void)
+cycle_t imx_get_cycles(struct clocksource *cs)
{
return IMX_TCN(TIMER_BASE);
}
/*
* clocksource
*/
-cycle_t ixp4xx_get_cycles(void)
+cycle_t ixp4xx_get_cycles(struct clocksource *cs)
{
return *IXP4XX_OSTS;
}
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
#include <plat/mvsdio.h>
--- /dev/null
+/*
+ * arch/arm/mach-kirkwood/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/kirkwood.h>
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define CPU_RESET 0x00000002
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF 0x0000
+#define IRQ_MASK_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
+#define L2_WRITETHROUGH 0x00000010
+
+#endif
* published by the Free Software Foundation.
*/
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
.macro addruart,rx
mrc p15, 0, \rx, c1, c0
* warranty of any kind, whether express or implied.
*/
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
#define KIRKWOOD_PCIE_MEM_PHYS_BASE 0xe0000000
#define KIRKWOOD_PCIE_MEM_SIZE SZ_128M
-/*
- * MBUS bridge registers.
- */
-#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
-#define CPU_RESET 0x00000002
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_LOW_OFF 0x0000
-#define IRQ_MASK_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
-#define L2_WRITETHROUGH 0x00000010
-
-/*
- * Supported devices and revisions.
- */
-#define MV88F6281_DEV_ID 0x6281
-#define MV88F6281_REV_Z0 0
-#define MV88F6281_REV_A0 2
-
-#define MV88F6192_DEV_ID 0x6192
-#define MV88F6192_REV_Z0 0
-#define MV88F6192_REV_A0 2
-
-#define MV88F6180_DEV_ID 0x6180
-#define MV88F6180_REV_A0 2
-
/*
* Register Map
*/
#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100)
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
+#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+
#define PCIE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x40000)
#define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000)
#define SDIO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x90000)
+/*
+ * Supported devices and revisions.
+ */
+#define MV88F6281_DEV_ID 0x6281
+#define MV88F6281_REV_Z0 0
+#define MV88F6281_REV_A0 2
+
+#define MV88F6192_DEV_ID 0x6192
+#define MV88F6192_REV_Z0 0
+#define MV88F6192_REV_A0 2
+
+#define MV88F6180_DEV_ID 0x6180
+#define MV88F6180_REV_A0 2
#endif
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/kirkwood.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include <asm/gpio.h>
#include "common.h"
/*
* CPU Address Decode Windows registers
*/
+#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
#define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4))
--- /dev/null
+/*
+ * arch/arm/mach-loki/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/loki.h>
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR 0x0004
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_OFF 0x0000
+#define IRQ_MASK_OFF 0x0004
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000)
-#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x))
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR 0x0004
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_OFF 0x0000
-#define IRQ_MASK_OFF 0x0004
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000)
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/loki.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/io.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
return IRQ_HANDLED;
}
-static cycle_t msm_gpt_read(void)
+static cycle_t msm_gpt_read(struct clocksource *cs)
{
return readl(MSM_GPT_BASE + TIMER_COUNT_VAL);
}
-static cycle_t msm_dgt_read(void)
+static cycle_t msm_dgt_read(struct clocksource *cs)
{
return readl(MSM_DGT_BASE + TIMER_COUNT_VAL) >> MSM_DGT_SHIFT;
}
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
#include <plat/cache-feroceon-l2.h>
#include <plat/ehci-orion.h>
#include <plat/orion_nand.h>
--- /dev/null
+/*
+ * arch/arm/mach-mv78xx0/include/mach/bridge-regs.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/mv78xx0.h>
+
+#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
+#define L2_WRITETHROUGH 0x00020000
+
+#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
+#define SOFT_RESET_OUT_EN 0x00000004
+
+#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
+#define SOFT_RESET 0x00000001
+
+#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_ERR_OFF 0x0000
+#define IRQ_CAUSE_LOW_OFF 0x0004
+#define IRQ_CAUSE_HIGH_OFF 0x0008
+#define IRQ_MASK_ERR_OFF 0x000c
+#define IRQ_MASK_LOW_OFF 0x0010
+#define IRQ_MASK_HIGH_OFF 0x0014
+
+#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
* Core-specific peripheral registers.
*/
#define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE)
-#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104)
-#define L2_WRITETHROUGH 0x00020000
-#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108)
-#define SOFT_RESET_OUT_EN 0x00000004
-#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c)
-#define SOFT_RESET 0x00000001
-#define BRIDGE_CAUSE (BRIDGE_VIRT_BASE | 0x0110)
-#define BRIDGE_MASK (BRIDGE_VIRT_BASE | 0x0114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200)
-#define IRQ_CAUSE_ERR_OFF 0x0000
-#define IRQ_CAUSE_LOW_OFF 0x0004
-#define IRQ_CAUSE_HIGH_OFF 0x0008
-#define IRQ_MASK_ERR_OFF 0x000c
-#define IRQ_MASK_LOW_OFF 0x0010
-#define IRQ_MASK_HIGH_OFF 0x0014
-#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
-
-/*
- * Supported devices and revisions.
- */
-#define MV78X00_Z0_DEV_ID 0x6381
-#define MV78X00_REV_Z0 1
-
-#define MV78100_DEV_ID 0x7810
-#define MV78100_REV_A0 1
-
-#define MV78200_DEV_ID 0x7820
-#define MV78200_REV_A0 1
/*
* Register Map
#define SATA_PHYS_BASE (MV78XX0_REGS_PHYS_BASE | 0xa0000)
+/*
+ * Supported devices and revisions.
+ */
+#define MV78X00_Z0_DEV_ID 0x6381
+#define MV78X00_REV_Z0 1
+
+#define MV78100_DEV_ID 0x7810
+#define MV78100_REV_A0 1
+
+#define MV78200_DEV_ID 0x7820
+#define MV78200_REV_A0 1
#endif
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/pci.h>
#include <linux/irq.h>
#include <asm/gpio.h>
-#include <mach/mv78xx0.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/irqs.h>
-#ifdef CONFIG_I2C_IMX
#include <mach/i2c.h>
-#endif
#include <mach/iomux.h>
#include "devices.h"
* I2C
*/
-#ifdef CONFIG_I2C_IMX
static int i2c_pins[] = {
PA15_PF_I2C_SDA,
PA16_PF_I2C_SCL,
.platform_data = &pcf857x_data[1],
},
};
-#endif
/*
* Board init
mxc_register_device(&flash_device, &mx1ads_flash_data);
/* I2C */
-#ifdef CONFIG_I2C_IMX
i2c_register_board_info(0, mx1ads_i2c_devices,
ARRAY_SIZE(mx1ads_i2c_devices));
mxc_register_device(&imx_i2c_device, &mx1ads_i2c_data);
-#endif
}
static void __init mx1ads_timer_init(void)
_REGISTER_CLOCK(NULL, "cspi1", cspi_clk[0])
_REGISTER_CLOCK(NULL, "cspi2", cspi_clk[1])
_REGISTER_CLOCK(NULL, "cspi3", cspi_clk[2])
- _REGISTER_CLOCK(NULL, "lcdc", lcdc_clk[0])
+ _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
_REGISTER_CLOCK(NULL, "csi", csi_clk[0])
_REGISTER_CLOCK(NULL, "usb", usb_clk[0])
_REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
_REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
- _REGISTER_CLOCK(NULL, "nfc", nfc_clk)
+ _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
_REGISTER_CLOCK(NULL, "dma", dma_clk[0])
_REGISTER_CLOCK(NULL, "brom", brom_clk)
_REGISTER_CLOCK(NULL, "emma", emma_clk[0])
_REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
- _REGISTER_CLOCK(NULL, "i2c", i2c_clk)
+ _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
_REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
_REGISTER_CLOCK(NULL, "owire", owire_clk)
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
config MACH_MX31ADS_WM1133_EV1
bool "Support Wolfson Microelectronics 1133-EV1 module"
depends on MACH_MX31ADS
+ depends on MFD_WM8350_I2C
+ depends on REGULATOR_WM8350
select MFD_WM8350_CONFIG_MODE_0
select MFD_WM8352_CONFIG_MODE_0
help
.flags = IMXUART_HAVE_RTSCTS,
};
-static int uart_pins[] = {
+static unsigned int uart_pins[] = {
MX31_PIN_CTS1__CTS1,
MX31_PIN_RTS1__RTS1,
MX31_PIN_TXD1__TXD1,
wm8350->codec.platform_data = &imx32ads_wm8350_setup;
+ regulator_has_full_constraints();
+
return 0;
}
mxc_iomux_setup_pin(MX31_PIN_BATT_LINE__OWIRE, "batt-0wire");
mxc_register_device(&mxc_w1_master_device, NULL);
- /* SMSC9215 IRQ pin */
+ /* LAN9217 IRQ pin */
if (!mxc_iomux_setup_pin(IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO),
"pcm037-eth"))
- gpio_direction_input(MX31_PIN_GPIO3_1);
+ gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1));
#ifdef CONFIG_I2C_IMX
i2c_register_board_info(1, pcm037_i2c_devices,
qong_init_dnet();
}
-/*
- * This structure defines the MX31 memory map.
- */
-static struct map_desc qong_io_desc[] __initdata = {
- {
- .virtual = AIPS1_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS1_BASE_ADDR),
- .length = AIPS1_SIZE,
- .type = MT_DEVICE_NONSHARED
- }, {
- .virtual = AIPS2_BASE_ADDR_VIRT,
- .pfn = __phys_to_pfn(AIPS2_BASE_ADDR),
- .length = AIPS2_SIZE,
- .type = MT_DEVICE_NONSHARED
- }
-};
-
-/*
- * Set up static virtual mappings.
- */
-static void __init qong_map_io(void)
-{
- mxc_map_io();
- iotable_init(qong_io_desc, ARRAY_SIZE(qong_io_desc));
-}
-
/*
* Board specific initialization.
*/
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
- .map_io = qong_map_io,
+ .map_io = mxc_map_io,
.init_irq = mxc_init_irq,
.init_machine = mxc_board_init,
.timer = &qong_timer,
.handler = netx_timer_interrupt,
};
-cycle_t netx_get_cycles(void)
+cycle_t netx_get_cycles(struct clocksource *cs)
{
return readl(NETX_GPIO_COUNTER_CURRENT(TIMER_CLOCKSOURCE));
}
#define TIMER_CLOCKEVENT 1
static u32 latch;
-static cycle_t ns9360_clocksource_read(void)
+static cycle_t ns9360_clocksource_read(struct clocksource *cs)
{
return __raw_readl(SYS_TR(TIMER_CLOCKSOURCE));
}
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
static int mmc_late_init(struct device *dev)
{
- int ret;
-
- ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
+ int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
if (ret < 0)
return ret;
return ret;
}
-static void mmc_shutdown(struct device *dev)
+static void mmc_cleanup(struct device *dev)
{
gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
}
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.init = mmc_late_init,
- .shutdown = mmc_shutdown,
+ .cleanup = mmc_cleanup,
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <mach/gpioexpander.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/nand.h>
-#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/dma.h>
.resource = h3_kp_resources,
};
-
-/* Select between the IrDA and aGPS module
- */
-static int h3_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x26))) {
- printk(KERN_ERR "Error reading from I/O EXPANDER \n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDA */
- if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x03;
-
- if (mode & IR_SIRMODE) {
- expa |= 0x01;
- } else { /* MIR/FIR */
- expa |= 0x03;
- }
-
- if ((err = write_gpio_expa(expa, 0x27)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h3_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h3_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h3_transceiver_mode,
- .select_irda = h3_select_irda,
- .rx_channel = OMAP_DMA_UART3_RX,
- .tx_channel = OMAP_DMA_UART3_TX,
- .dest_start = UART3_THR,
- .src_start = UART3_RHR,
- .tx_trigger = 0,
- .rx_trigger = 0,
-};
-
-static struct resource h3_irda_resources[] = {
- [0] = {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device h3_irda_device = {
- .name = "omapirda",
- .id = 0,
- .dev = {
- .platform_data = &h3_irda_data,
- .dma_mask = &irda_dmamask,
- },
- .num_resources = ARRAY_SIZE(h3_irda_resources),
- .resource = h3_irda_resources,
-};
-
static struct platform_device h3_lcd_device = {
.name = "lcd_h3",
.id = -1,
&nand_device,
&smc91x_device,
&intlat_device,
- &h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
};
static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1);
- else
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0);
-
+ gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
return 0;
}
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (dsp_use++ == 0) {
- api_clk = clk_get(NULL, "api_clk");
- dsp_clk = clk_get(NULL, "dsp_clk");
+ api_clk = clk_get(NULL, "api_ck");
+ dsp_clk = clk_get(NULL, "dsp_ck");
if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
clk_enable(api_clk);
clk_enable(dsp_clk);
.handler = omap_mpu_timer2_interrupt,
};
-static cycle_t mpu_read(void)
+static cycle_t mpu_read(struct clocksource *cs)
{
return ~omap_mpu_timer_read(1);
}
#include <mach/control.h>
#include <mach/gpio.h>
-#include <mach/gpioexpander.h>
#include <mach/mux.h>
#include <mach/usb.h>
-#include <mach/irda.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
.resource = &h4_flash_resource,
};
-/* Select between the IrDA and aGPS module
- */
-static int h4_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x21))) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDa */
- if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x01;
-
- if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
- expa |= 0x01;
- }
-
- if ((err = write_gpio_expa(expa, 0x20)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h4_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h4_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h4_transceiver_mode,
- .select_irda = h4_select_irda,
- .rx_channel = OMAP24XX_DMA_UART3_RX,
- .tx_channel = OMAP24XX_DMA_UART3_TX,
- .dest_start = OMAP_UART3_BASE,
- .src_start = OMAP_UART3_BASE,
- .tx_trigger = OMAP24XX_DMA_UART3_TX,
- .rx_trigger = OMAP24XX_DMA_UART3_RX,
-};
-
-static struct resource h4_irda_resources[] = {
- [0] = {
- .start = INT_24XX_UART3_IRQ,
- .end = INT_24XX_UART3_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device h4_irda_device = {
- .name = "omapirda",
- .id = -1,
- .dev = {
- .platform_data = &h4_irda_data,
- },
- .num_resources = 1,
- .resource = h4_irda_resources,
-};
-
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
- &h4_irda_device,
&h4_kp_device,
&h4_lcd_device,
};
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#include <mach/timer-gp.h>
#include "mmc-twl4030.h"
{
omap2_init_common_hw(NULL);
omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
omap_gpio_init();
}
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
}, \
}
-#define CK_243X (1 << 0)
-#define CK_242X (1 << 1)
+#define CK_243X RATE_IN_243X
+#define CK_242X RATE_IN_242X
static struct omap_clk omap24xx_clks[] = {
/* external root sources */
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
{
struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate, cpu_mask;
+ u32 clkrate;
if (cpu_is_omap242x())
cpu_mask = RATE_IN_242X;
clk_init(&omap2_clk_functions);
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ clk_init_one(c->lk.clk);
+
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_init_one(c->lk.clk);
-
- cpu_mask = 0;
- if (cpu_is_omap2420())
- cpu_mask |= CK_242X;
- if (cpu_is_omap2430())
- cpu_mask |= CK_243X;
-
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
.clkdm_name = "wkup_clkdm",
};
+static struct clk secure_32k_ck = {
+ .name = "secure_32k_ck",
+ .ops = &clkops_null,
+ .rate = 32768,
+ .flags = RATE_FIXED,
+ .clkdm_name = "wkup_clkdm",
+};
+
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
+ .parent = &secure_32k_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
static struct clk cam_mclk = {
.name = "cam_mclk",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &dpll4_m5x2_ck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
static struct clk cam_ick = {
/* Handles both L3 and L4 clocks */
.name = "cam_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
static struct clk csi2_96m_fck = {
.name = "csi2_96m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &core_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
/* SECURE_32K_FCK clocks */
-/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_null,
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
-#include <mach/eac.h>
#include <mach/mmc.h>
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static inline void omap_init_mcspi(void) {}
#endif
-#ifdef CONFIG_SND_OMAP24XX_EAC
-
-#define OMAP2_EAC_BASE 0x48090000
-
-static struct resource omap2_eac_resources[] = {
- {
- .start = OMAP2_EAC_BASE,
- .end = OMAP2_EAC_BASE + 0x109,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap2_eac_device = {
- .name = "omap24xx-eac",
- .id = -1,
- .num_resources = ARRAY_SIZE(omap2_eac_resources),
- .resource = omap2_eac_resources,
- .dev = {
- .platform_data = NULL,
- },
-};
-
-void omap_init_eac(struct eac_platform_data *pdata)
-{
- omap2_eac_device.dev.platform_data = pdata;
- platform_device_register(&omap2_eac_device);
-}
-
-#else
-void omap_init_eac(struct eac_platform_data *pdata) {}
-#endif
-
#ifdef CONFIG_OMAP_SHA1_MD5
static struct resource sha1_md5_resources[] = {
{
u32 sir, spurious;
sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
- spurious = sir >> 6;
+ spurious = sir >> 7;
- if (spurious > 1) {
+ if (spurious) {
printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
"posted write for irq %i\n",
irq, sir, previous_irq);
*
* OMAP2 GP timer support.
*
+ * Copyright (C) 2009 Nokia Corporation
+ *
* Update to use new clocksource/clockevent layers
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 MontaVista Software, Inc.
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
+/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
+#define MAX_GPTIMER_ID 12
+
static struct omap_dm_timer *gptimer;
static struct clock_event_device clockevent_gpt;
+static u8 __initdata gptimer_id = 1;
+static u8 __initdata inited;
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
.set_mode = omap2_gp_timer_set_mode,
};
+/**
+ * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents
+ * @id: GPTIMER to use (1..MAX_GPTIMER_ID)
+ *
+ * Define the GPTIMER that the system should use for the tick timer.
+ * Meant to be called from board-*.c files in the event that GPTIMER1, the
+ * default, is unsuitable. Returns -EINVAL on error or 0 on success.
+ */
+int __init omap2_gp_clockevent_set_gptimer(u8 id)
+{
+ if (id < 1 || id > MAX_GPTIMER_ID)
+ return -EINVAL;
+
+ BUG_ON(inited);
+
+ gptimer_id = id;
+
+ return 0;
+}
+
static void __init omap2_gp_clockevent_init(void)
{
u32 tick_rate;
+ int src;
+
+ inited = 1;
- gptimer = omap_dm_timer_request_specific(1);
+ gptimer = omap_dm_timer_request_specific(gptimer_id);
BUG_ON(gptimer == NULL);
#if defined(CONFIG_OMAP_32K_TIMER)
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+ src = OMAP_TIMER_SRC_32_KHZ;
#else
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+ src = OMAP_TIMER_SRC_SYS_CLK;
+ WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the "
+ "secure 32KiHz clock source\n");
#endif
+
+ if (gptimer_id != 12)
+ WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)),
+ "timer-gp: omap_dm_timer_set_source() failed\n");
+
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
+ gptimer_id, tick_rate);
+
omap2_gp_timer_irq.dev_id = (void *)gptimer;
setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
clockevents_register_device(&clockevent_gpt);
}
+/* Clocksource code */
+
#ifdef CONFIG_OMAP_32K_TIMER
/*
* When 32k-timer is enabled, don't use GPTimer for clocksource
* clocksource
*/
static struct omap_dm_timer *gpt_clocksource;
-static cycle_t clocksource_read_cycles(void)
+static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
}
.power = 50, /* up to 100 mA */
};
-static u64 musb_dmamask = DMA_32BIT_MASK;
+static u64 musb_dmamask = DMA_BIT_MASK(32);
static struct platform_device musb_device = {
.name = "musb_hdrc",
.id = -1,
.dev = {
.dma_mask = &musb_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &musb_plat,
},
.num_resources = ARRAY_SIZE(musb_resources),
};
#ifdef CONFIG_NOP_USB_XCEIV
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
static struct platform_device nop_xceiv_device = {
.name = "nop_usb_xceiv",
.id = -1,
.dev = {
.dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = NULL,
},
};
unsigned sysclk_ps;
int status;
- if (!refclk_psec)
+ if (!refclk_psec || sysclk_ps == 0)
return -ENODEV;
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
/*
* Helpers to get DDR bank info
*/
+#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
/*
* CPU Address Decode Windows registers
*/
+#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/include/mach/bridge-regs.h
+ *
+ * Orion CPU Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/orion5x.h>
+
+#define CPU_CONF (ORION5X_BRIDGE_VIRT_BASE | 0x100)
+
+#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
+
+#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
+#define WDT_RESET 0x0002
+
+#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
+
+#define POWER_MNG_CTRL_REG (ORION5X_BRIDGE_VIRT_BASE | 0x11C)
+
+#define BRIDGE_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x110)
+#define WDT_INT_REQ 0x0008
+
+#define BRIDGE_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x114)
+#define BRIDGE_INT_TIMER0 0x0002
+#define BRIDGE_INT_TIMER1 0x0004
+#define BRIDGE_INT_TIMER1_CLR (~0x0004)
+
+#define MAIN_IRQ_CAUSE (ORION5X_BRIDGE_VIRT_BASE | 0x200)
+
+#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
+
+#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
+
+#endif
* warranty of any kind, whether express or implied.
*/
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
.macro disable_fiq
.endm
#define ORION5X_PCI_MEM_PHYS_BASE 0xe8000000
#define ORION5X_PCI_MEM_SIZE SZ_128M
-/*******************************************************************************
- * Supported Devices & Revisions
- ******************************************************************************/
-/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
-#define MV88F5181_DEV_ID 0x5181
-#define MV88F5181_REV_B1 3
-#define MV88F5181L_REV_A0 8
-#define MV88F5181L_REV_A1 9
-/* Orion-NAS (88F5182) */
-#define MV88F5182_DEV_ID 0x5182
-#define MV88F5182_REV_A2 2
-/* Orion-2 (88F5281) */
-#define MV88F5281_DEV_ID 0x5281
-#define MV88F5281_REV_D0 4
-#define MV88F5281_REV_D1 5
-#define MV88F5281_REV_D2 6
-/* Orion-1-90 (88F6183) */
-#define MV88F6183_DEV_ID 0x6183
-#define MV88F6183_REV_B0 3
-
/*******************************************************************************
* Orion Registers Map
******************************************************************************/
+
#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
-#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
-#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
-#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
-#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
#define ORION5X_PCIE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x40000)
-#define ORION5X_PCIE_REG(x) (ORION5X_PCIE_VIRT_BASE | (x))
#define ORION5X_USB0_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x50000)
#define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000)
-#define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x))
#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900)
#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900)
-#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x))
#define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000)
#define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000)
-#define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x))
#define ORION5X_SATA_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x80000)
#define ORION5X_SATA_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x80000)
-#define ORION5X_SATA_REG(x) (ORION5X_SATA_VIRT_BASE | (x))
#define ORION5X_USB1_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0xa0000)
#define ORION5X_USB1_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0xa0000)
-#define ORION5X_USB1_REG(x) (ORION5X_USB1_VIRT_BASE | (x))
/*******************************************************************************
* Device Bus Registers
#define DEV_BUS_INT_CAUSE ORION5X_DEV_BUS_REG(0x4d0)
#define DEV_BUS_INT_MASK ORION5X_DEV_BUS_REG(0x4d4)
-/***************************************************************************
- * Orion CPU Bridge Registers
- **************************************************************************/
-#define CPU_CONF ORION5X_BRIDGE_REG(0x100)
-#define CPU_CTRL ORION5X_BRIDGE_REG(0x104)
-#define CPU_RESET_MASK ORION5X_BRIDGE_REG(0x108)
-#define WDT_RESET 0x0002
-#define CPU_SOFT_RESET ORION5X_BRIDGE_REG(0x10c)
-#define POWER_MNG_CTRL_REG ORION5X_BRIDGE_REG(0x11C)
-#define BRIDGE_CAUSE ORION5X_BRIDGE_REG(0x110)
-#define WDT_INT_REQ 0x0008
-#define BRIDGE_MASK ORION5X_BRIDGE_REG(0x114)
-#define BRIDGE_INT_TIMER0 0x0002
-#define BRIDGE_INT_TIMER1 0x0004
-#define BRIDGE_INT_TIMER1_CLR (~0x0004)
-#define MAIN_IRQ_CAUSE ORION5X_BRIDGE_REG(0x200)
-#define MAIN_IRQ_MASK ORION5X_BRIDGE_REG(0x204)
-
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID 0x5181
+#define MV88F5181_REV_B1 3
+#define MV88F5181L_REV_A0 8
+#define MV88F5181L_REV_A1 9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID 0x5182
+#define MV88F5182_REV_A2 2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID 0x5281
+#define MV88F5281_REV_D0 4
+#define MV88F5281_REV_D1 5
+#define MV88F5281_REV_D2 6
+/* Orion-1-90 (88F6183) */
+#define MV88F6183_DEV_ID 0x6183
+#define MV88F6183_REV_B0 3
#endif
#ifndef __ASM_ARCH_SYSTEM_H
#define __ASM_ARCH_SYSTEM_H
-#include <mach/hardware.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
static inline void arch_idle(void)
{
#include <linux/irq.h>
#include <linux/io.h>
#include <asm/gpio.h>
-#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
#include <plat/irq.h>
#include "common.h"
#include <asm/mach/arch.h>
#include <asm/mach/pci.h>
#include <mach/orion5x.h>
+#include <mach/bridge-regs.h>
#include "common.h"
#include "mpp.h"
/*****************************************************************************
* PCI controller
****************************************************************************/
+#define ORION5X_PCI_REG(x) (ORION5X_PCI_VIRT_BASE | (x))
#define PCI_MODE ORION5X_PCI_REG(0xd00)
#define PCI_CMD ORION5X_PCI_REG(0xc00)
#define PCI_P2P_CONF ORION5X_PCI_REG(0x1d14)
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
.num_chipselect = 3,
};
+static void corgi_wait_for_hsync(void)
+{
+ while (gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data corgi_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = CORGI_GPIO_TP_INT,
+ .wait_for_sync = corgi_wait_for_hsync,
};
static void corgi_ads7846_cs(u32 command)
#include <linux/spi/libertas_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
-#include <linux/delay.h>
#include <media/soc_camera.h>
};
static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
- .rx_threshold = 1,
- .tx_threshold = 1,
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .gpio_cs = -1,
};
static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
extern void __init pxa_init_irq(int irq_nr,
int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa_map_io(void);
#include <sound/core.h>
#include <sound/pcm.h>
+/*
+ * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
+ * a -1 value means no gpio will be used for reset
+
+ * reset_gpio should only be specified for pxa27x CPUs where a silicon
+ * bug prevents correct operation of the reset line. If not specified,
+ * the default behaviour on these CPUs is to consider gpio 113 as the
+ * AC97 reset line, which is the default on most boards.
+ */
typedef struct {
int (*startup)(struct snd_pcm_substream *, void *);
void (*shutdown)(struct snd_pcm_substream *, void *);
void (*suspend)(void *);
void (*resume)(void *);
void *priv;
+ int reset_gpio;
} pxa2xx_audio_ops_t;
extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
#else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
extern void colibri_pxa3xx_init_lcd(int bl_pin);
#else
-static inline void colibri_pxa3xx_init_lcd(int) {}
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
#endif
#if defined(CONFIG_AX88796)
#ifndef _INCLUDE_PALMASOC_H_
#define _INCLUDE_PALMASOC_H_
+
struct palm27x_asoc_info {
int jack_gpio;
};
-#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
-#else
-static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
-#endif
-
#endif
/* USB */
#define GPIO_NR_PALMT5_USB_DETECT_N 15
-#define GPIO_NR_PALMT5_USB_POWER 95
#define GPIO_NR_PALMT5_USB_PULLUP 93
/* LCD/BACKLIGHT */
/* USB */
#define GPIO_NR_PALMTX_USB_DETECT_N 13
-#define GPIO_NR_PALMTX_USB_POWER 95
#define GPIO_NR_PALMTX_USB_PULLUP 93
/* LCD/BACKLIGHT */
},
};
+static struct da9034_touch_pdata littleton_da9034_touch = {
+ .x_inverted = 1,
+ .interval_ms = 20,
+};
+
static struct da903x_subdev_info littleton_da9034_subdevs[] = {
{
.name = "da903x-led",
}, {
.name = "da903x-backlight",
.id = DA9034_ID_WLED,
+ }, {
+ .name = "da9034-touch",
+ .id = DA9034_ID_TOUCH,
+ .platform_data = &littleton_da9034_touch,
},
};
.fast_mode = 1,
};
+static pxa2xx_audio_ops_t mioa701_ac97_info = {
+ .reset_gpio = 95,
+};
+
/*
* Mio global
*/
pxa_set_keypad_info(&mioa701_keypad_info);
wm97xx_bat_set_pdata(&mioa701_battery_data);
pxa_set_udc_info(&mioa701_udc_info);
- pxa_set_ac97_info(NULL);
+ pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
/******************************************************************************
* aSoC audio
******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmld_asoc_pdata = {
.jack_gpio = GPIO_NR_PALMLD_EARPHONE_DETECT,
};
+static pxa2xx_audio_ops_t palmld_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct platform_device palmld_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmld_asoc_pdata,
+ },
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
&palmld_backlight,
&palmld_leds,
&power_supply,
+ &palmld_asoc,
};
static struct map_desc palmld_io_desc[] __initdata = {
set_pxa_fb_info(&palmld_lcd_screen);
pxa_set_mci_info(&palmld_mci_platform_data);
- pxa_set_ac97_info(NULL);
+ pxa_set_ac97_info(&palmld_ac97_pdata);
pxa_set_ficp_info(&palmld_ficp_platform_data);
pxa_set_keypad_info(&palmld_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
- palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO40_GPIO, /* ir disable */
/* USB */
GPIO15_GPIO, /* usb detect */
- GPIO95_GPIO, /* usb power */
+ GPIO93_GPIO, /* usb power */
/* MATRIX KEYPAD */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMT5_USB_POWER,
+ .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP,
.gpio_pullup_inverted = 0,
};
/******************************************************************************
* aSoC audio
******************************************************************************/
-static struct palm27x_asoc_info palm27x_asoc_pdata = {
+static struct palm27x_asoc_info palmt5_asoc_pdata = {
.jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT,
};
+static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct platform_device palmt5_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmt5_asoc_pdata,
+ },
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
#endif
&palmt5_backlight,
&power_supply,
+ &palmt5_asoc,
};
/* setup udc GPIOs initial state */
static void __init palmt5_udc_init(void)
{
- if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
- gpio_free(GPIO_NR_PALMT5_USB_POWER);
+ if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
}
}
set_pxa_fb_info(&palmt5_lcd_screen);
pxa_set_mci_info(&palmt5_mci_platform_data);
palmt5_udc_init();
+ pxa_set_ac97_info(&palmt5_ac97_pdata);
pxa_set_udc_info(&palmt5_udc_info);
- pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmt5_ficp_platform_data);
pxa_set_keypad_info(&palmt5_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
- palm27x_asoc_set_pdata(&palm27x_asoc_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
+#include <mach/palmasoc.h>
#include "generic.h"
#include "devices.h"
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO40_GPIO, /* ir disable */
/* USB */
GPIO13_GPIO, /* usb detect */
- GPIO95_GPIO, /* usb power */
+ GPIO93_GPIO, /* usb power */
/* PCMCIA */
GPIO48_nPOE,
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMTX_USB_POWER,
+ .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP,
.gpio_pullup_inverted = 0,
};
.batt_name = "main-batt",
};
+/******************************************************************************
+ * aSoC audio
+ ******************************************************************************/
+static struct palm27x_asoc_info palmtx_asoc_pdata = {
+ .jack_gpio = GPIO_NR_PALMTX_EARPHONE_DETECT,
+};
+
+static pxa2xx_audio_ops_t palmtx_ac97_pdata = {
+ .reset_gpio = 95,
+};
+
+static struct platform_device palmtx_asoc = {
+ .name = "palm27x-asoc",
+ .id = -1,
+ .dev = {
+ .platform_data = &palmtx_asoc_pdata,
+ },
+};
+
/******************************************************************************
* Framebuffer
******************************************************************************/
#endif
&palmtx_backlight,
&power_supply,
+ &palmtx_asoc,
};
static struct map_desc palmtx_io_desc[] __initdata = {
/* setup udc GPIOs initial state */
static void __init palmtx_udc_init(void)
{
- if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
- gpio_free(GPIO_NR_PALMTX_USB_POWER);
+ if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
}
}
set_pxa_fb_info(&palmtx_lcd_screen);
pxa_set_mci_info(&palmtx_mci_platform_data);
palmtx_udc_init();
+ pxa_set_ac97_info(&palmtx_ac97_pdata);
pxa_set_udc_info(&palmtx_udc_info);
- pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&palmtx_ficp_platform_data);
pxa_set_keypad_info(&palmtx_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
#include <linux/i2c/pca953x.h>
static struct pca953x_platform_data pca9536_data = {
- .gpio_base = NR_BUILTIN_GPIO + 1,
+ .gpio_base = NR_BUILTIN_GPIO,
};
static int gpio_bus_switch;
int ret;
if (!gpio_bus_switch) {
- ret = gpio_request(NR_BUILTIN_GPIO + 1, "camera");
+ ret = gpio_request(NR_BUILTIN_GPIO, "camera");
if (!ret) {
- gpio_bus_switch = NR_BUILTIN_GPIO + 1;
+ gpio_bus_switch = NR_BUILTIN_GPIO;
gpio_direction_output(gpio_bus_switch, 0);
} else
gpio_bus_switch = -EINVAL;
.num_chipselect = 3,
};
+static void spitz_wait_for_hsync(void)
+{
+ while (gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data spitz_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = SPITZ_GPIO_TP_INT,
+ .wait_for_sync = spitz_wait_for_hsync,
};
static void spitz_ads7846_cs(u32 command)
.set_mode = pxa_osmr0_set_mode,
};
-static cycle_t pxa_read_oscr(void)
+static cycle_t pxa_read_oscr(struct clocksource *cs)
{
return OSCR;
}
GPIO25_AC97_SDATA_IN_0,
GPIO27_AC97_SDATA_OUT,
GPIO28_AC97_SYNC,
+ GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO91_SSP3_SCLK,
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
+
+ /* GPIO */
+ GPIO18_GPIO, /* GPIO Expander #0 INT_N */
+ GPIO19_GPIO, /* GPIO Expander #1 INT_N */
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
GPIO38_AC97_SYNC,
GPIO39_AC97_BITCLK,
GPIO40_AC97_nACRESET,
+ GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO89_SSP3_SCLK,
.handler = realview_timer_interrupt,
};
-static cycle_t realview_get_cycles(void)
+static cycle_t realview_get_cycles(struct clocksource *cs)
{
return ~readl(timer3_va_base + TIMER_VALUE);
}
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/udc.h>
-#include <plat/iic.h>
static struct map_desc jive_iodesc[] __initdata = {
};
#define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN)
#define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN)
-struct s3c2410fb_display jive_vgg2432a4_display[] = {
+static struct s3c2410fb_display jive_vgg2432a4_display[] = {
[0] = {
.width = LCD_XRES,
.height = LCD_YRES,
#define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2))
#define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2))
-struct s3c2410fb_mach_info jive_lcd_config = {
+static struct s3c2410fb_mach_info jive_lcd_config = {
.displays = jive_vgg2432a4_display,
.num_displays = ARRAY_SIZE(jive_vgg2432a4_display),
.default_display = 0,
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/cacheflush.h>
#include <asm/irq.h>
#include <mach/regs-power.h>
{
unsigned long tmp;
+ flush_cache_all();
+
/* set our standby method to sleep */
tmp = __raw_readl(S3C2412_PWRCFG);
/* IDE channels */
-struct pata_platform_info anubis_ide_platdata = {
+static struct pata_platform_info anubis_ide_platdata = {
.ioport_shift = 5,
};
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = osiris_map_io,
- .init_machine = osiris_init,
.init_irq = s3c24xx_init_irq,
.init_machine = osiris_init,
.timer = &s3c24xx_timer,
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_IIS0 (0x7F002000)
+#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
s3c_i2c1_set_platdata(NULL);
s3c_fb_set_platdata(&smdk6410_lcd_pdata);
+ gpio_request(S3C64XX_GPN(5), "LCD power");
+ gpio_request(S3C64XX_GPF(13), "LCD power");
+ gpio_request(S3C64XX_GPF(15), "LCD power");
+
i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
+#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
.handler = versatile_timer_interrupt,
};
-static cycle_t versatile_get_cycles(void)
+static cycle_t versatile_get_cycles(struct clocksource *cs)
{
return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
}
#define D_CACHE_LINE_SIZE 32
#define BTB_FLUSH_SIZE 8
+#ifdef CONFIG_ARM_ERRATA_411920
+/*
+ * Invalidate the entire I cache (this code is a workaround for the ARM1136
+ * erratum 411920 - Invalidate Instruction Cache operation can fail. This
+ * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore.
+ *
+ * Registers:
+ * r0 - set to 0
+ * r1 - corrupted
+ */
+ENTRY(v6_icache_inval_all)
+ mov r0, #0
+ mrs r1, cpsr
+ cpsid ifa @ disable interrupts
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ msr cpsr_cx, r1 @ restore interrupts
+ .rept 11 @ ARM Ltd recommends at least
+ nop @ 11 NOPs
+ .endr
+ mov pc, lr
+#endif
+
/*
* v6_flush_cache_all()
*
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+#else
+ b v6_icache_inval_all
+#endif
#else
mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate
#endif
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
+#else
+ b v6_icache_inval_all
+#endif
#else
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
#endif
#include "mm.h"
+#ifdef CONFIG_ARM_ERRATA_411920
+extern void v6_icache_inval_all(void);
+#endif
+
#ifdef CONFIG_CPU_CACHE_VIPT
#define ALIAS_FLUSH_START 0xffff4000
asm( "mcrr p15, 0, %1, %0, c14\n"
" mcr p15, 0, %2, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %2, c7, c5, 0\n"
+#endif
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
void flush_cache_mm(struct mm_struct *mm)
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
*
* This is the "shell" of the ARMv6 processor support.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
.asciz "ARMv6-compatible processor"
.align
- .section ".text.init", #alloc, #execinstr
+ __INIT
/*
* __v6_setup
*
* This is the "shell" of the ARMv7 processor support.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/asm-offsets.h>
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
orr r0, r0, #TTB_FLAGS
+#ifdef CONFIG_ARM_ERRATA_430973
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
.ascii "ARMv7 Processor"
.align
- .section ".text.init", #alloc, #execinstr
+ __INIT
/*
* __v7_setup
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
+#ifdef CONFIG_ARM_ERRATA_430973
+ mrc p15, 0, r10, c1, c0, 1 @ read aux control register
+ orr r10, r10, #(1 << 6) @ set IBE to 1
+ mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_458693
+ mrc p15, 0, r10, c1, c0, 1 @ read aux control register
+ orr r10, r10, #(1 << 5) @ set L1NEON to 1
+ orr r10, r10, #(1 << 9) @ set PLDNOP to 1
+ mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_460075
+ mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
+ orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
+ mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
+#endif
mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
* ARM architecture version 6 TLB handling functions.
* These assume a split I/D TLB.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
mcr p15, 0, r2, c7, c5, 4 @ prefetch flush
mov pc, lr
- .section ".text.init", #alloc, #execinstr
+ __INIT
.type v6wbi_tlb_fns, #object
ENTRY(v6wbi_tlb_fns)
* ARM architecture version 6 TLB handling functions.
* These assume a split I/D TLB.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/page.h>
mov pc, lr
ENDPROC(v7wbi_flush_kern_tlb_range)
- .section ".text.init", #alloc, #execinstr
+ __INIT
.type v7wbi_tlb_fns, #object
ENTRY(v7wbi_tlb_fns)
local_irq_restore(flags);
return -EBUSY;
}
+ memset(imxdma, 0, sizeof(imxdma));
+ imxdma->name = name;
+ local_irq_restore(flags); /* request_irq() can block */
#ifdef CONFIG_ARCH_MX2
ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
NULL);
if (ret) {
- local_irq_restore(flags);
+ imxdma->name = NULL;
printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
MXC_INT_DMACH0 + channel, channel);
return ret;
imxdma->watchdog.data = channel;
#endif
- imxdma->name = name;
- imxdma->irq_handler = NULL;
- imxdma->err_handler = NULL;
- imxdma->data = NULL;
- imxdma->sg = NULL;
-
- local_irq_restore(flags);
return ret;
}
EXPORT_SYMBOL(imx_dma_request);
local_irq_save(flags);
/* Disable interrupts */
- __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
- DMA_BASE + DMA_DIMR);
- __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
- DMA_BASE + DMA_CCR(channel));
+ imx_dma_disable(channel);
imxdma->name = NULL;
#ifdef CONFIG_ARCH_MX2
irq_stat = __raw_readl(port->base + GPIO_ISR) &
__raw_readl(port->base + GPIO_IMR);
- BUG_ON(!irq_stat);
+
mxc_gpio_irq_handler(port, irq_stat);
}
#endif
/*
* Base address of PBC controller, CS4
*/
-#define PBC_BASE_ADDRESS 0xEB000000
+#define PBC_BASE_ADDRESS 0xf4300000
#define PBC_REG_ADDR(offset) (void __force __iomem *) \
(PBC_BASE_ADDRESS + (offset))
unsigned int flags;
};
-int __init imx_init_uart(int uart_no, struct imxuart_platform_data *pdata);
-
#endif
*/
#define MX31_PIN_CSPI3_MOSI__RXD3 IOMUX_MODE(MX31_PIN_CSPI3_MOSI, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CSPI3_MISO__TXD3 IOMUX_MODE(MX31_PIN_CSPI3_MISO, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SCLK__RTS3 IOMUX_MODE(MX31_PIN_CSPI3_SCLK, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_CSPI3_SPI_RDY__CTS3 IOMUX_MODE(MX31_PIN_CSPI3_SPI_RDY, IOMUX_CONFIG_ALT1)
#define MX31_PIN_CTS1__CTS1 IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_RTS1__RTS1 IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_TXD1__TXD1 IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_DATA0__SD1_DATA0 IOMUX_MODE(MX31_PIN_SD1_DATA0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CLK__SD1_CLK IOMUX_MODE(MX31_PIN_SD1_CLK, IOMUX_CONFIG_FUNC)
#define MX31_PIN_SD1_CMD__SD1_CMD IOMUX_MODE(MX31_PIN_SD1_CMD, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_ATA_CS0__GPIO3_26 IOMUX_MODE(MX31_PIN_ATA_CS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_CS1__GPIO3_27 IOMUX_MODE(MX31_PIN_ATA_CS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_PC_PWRON__SD2_DATA3 IOMUX_MODE(MX31_PIN_PC_PWRON, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_VS1__SD2_DATA2 IOMUX_MODE(MX31_PIN_PC_VS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_READY__SD2_DATA1 IOMUX_MODE(MX31_PIN_PC_READY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_WAIT_B__SD2_DATA0 IOMUX_MODE(MX31_PIN_PC_WAIT_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD2_B__SD2_CLK IOMUX_MODE(MX31_PIN_PC_CD2_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_PC_CD1_B__SD2_CMD IOMUX_MODE(MX31_PIN_PC_CD1_B, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_ATA_DIOR__GPIO3_28 IOMUX_MODE(MX31_PIN_ATA_DIOR, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_ATA_DIOW__GPIO3_29 IOMUX_MODE(MX31_PIN_ATA_DIOW, IOMUX_CONFIG_GPIO)
#define MX31_PIN_LD0__LD0 IOMUX_MODE(MX31_PIN_LD0, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD1__LD1 IOMUX_MODE(MX31_PIN_LD1, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LD2__LD2 IOMUX_MODE(MX31_PIN_LD2, IOMUX_CONFIG_FUNC)
#define MX31_PIN_D3_SPL__D3_SPL IOMUX_MODE(MX31_PIN_D3_SPL, IOMUX_CONFIG_FUNC)
#define MX31_PIN_D3_CLS__D3_CLS IOMUX_MODE(MX31_PIN_D3_CLS, IOMUX_CONFIG_FUNC)
#define MX31_PIN_LCS0__GPI03_23 IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO1_1__GPIO IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_I2C_CLK__SCL IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_I2C_DAT__SDA IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__I2C2_SDA IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_RI_DTE1__I2C2_SCL IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT2)
+#define MX31_PIN_CSI_D4__CSI_D4 IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D5__CSI_D5 IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D6__CSI_D6 IOMUX_MODE(MX31_PIN_CSI_D6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D7__CSI_D7 IOMUX_MODE(MX31_PIN_CSI_D7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D8__CSI_D8 IOMUX_MODE(MX31_PIN_CSI_D8, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D9__CSI_D9 IOMUX_MODE(MX31_PIN_CSI_D9, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D10__CSI_D10 IOMUX_MODE(MX31_PIN_CSI_D10, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D11__CSI_D11 IOMUX_MODE(MX31_PIN_CSI_D11, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D12__CSI_D12 IOMUX_MODE(MX31_PIN_CSI_D12, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D13__CSI_D13 IOMUX_MODE(MX31_PIN_CSI_D13, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D14__CSI_D14 IOMUX_MODE(MX31_PIN_CSI_D14, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_D15__CSI_D15 IOMUX_MODE(MX31_PIN_CSI_D15, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_HSYNC__CSI_HSYNC IOMUX_MODE(MX31_PIN_CSI_HSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_MCLK__CSI_MCLK IOMUX_MODE(MX31_PIN_CSI_MCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_PIXCLK__CSI_PIXCLK IOMUX_MODE(MX31_PIN_CSI_PIXCLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_CSI_VSYNC__CSI_VSYNC IOMUX_MODE(MX31_PIN_CSI_VSYNC, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_GPIO3_0__GPIO3_0 IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_GPIO3_1__GPIO3_1 IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_TXD2__GPIO1_28 IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0 IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1 IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2 IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA3__USBOTG_DATA3 IOMUX_MODE(MX31_PIN_USBOTG_DATA3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA4__USBOTG_DATA4 IOMUX_MODE(MX31_PIN_USBOTG_DATA4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA5__USBOTG_DATA5 IOMUX_MODE(MX31_PIN_USBOTG_DATA5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA6__USBOTG_DATA6 IOMUX_MODE(MX31_PIN_USBOTG_DATA6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DATA7__USBOTG_DATA7 IOMUX_MODE(MX31_PIN_USBOTG_DATA7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_CLK__USBOTG_CLK IOMUX_MODE(MX31_PIN_USBOTG_CLK, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_DIR__USBOTG_DIR IOMUX_MODE(MX31_PIN_USBOTG_DIR, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_NXT__USBOTG_NXT IOMUX_MODE(MX31_PIN_USBOTG_NXT, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_USBOTG_STP__USBOTG_STP IOMUX_MODE(MX31_PIN_USBOTG_STP, IOMUX_CONFIG_FUNC)
/*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
* cspi1_ss1*/
#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS)
-extern void imx_irq_set_priority(unsigned char irq, unsigned char prio);
+extern int imx_irq_set_priority(unsigned char irq, unsigned char prio);
/* all normal IRQs can be FIQs */
#define FIQ_START 0
#define IRAM_BASE_ADDR 0xFFFFE800 /* internal ram */
-/* this CPU supports up to 192 GPIOs (don't forget the baseboard!) */
-#define ARCH_NR_GPIOS (6*32 + 16)
-
/* fixed interrupt numbers */
#define MXC_INT_USBCTRL 58
#define MXC_INT_USBCTRL 58
#define IIM_PROD_REV_SH 3
#define IIM_PROD_REV_LEN 5
-#ifdef CONFIG_MXC_IRQ_PRIOR
-void imx_irq_set_priority(unsigned char irq, unsigned char prio)
+int imx_irq_set_priority(unsigned char irq, unsigned char prio)
{
+#ifdef CONFIG_MXC_IRQ_PRIOR
unsigned int temp;
unsigned int mask = 0x0F << irq % 8 * 4;
- if (irq > 63)
- return;
+ if (irq >= MXC_INTERNAL_IRQS)
+ return -EINVAL;;
temp = __raw_readl(AVIC_NIPRIORITY(irq / 8));
temp &= ~mask;
temp |= prio & mask;
__raw_writel(temp, AVIC_NIPRIORITY(irq / 8));
+
+ return 0;
+#else
+ return -ENOSYS;
+#endif
}
EXPORT_SYMBOL(imx_irq_set_priority);
-#endif
#ifdef CONFIG_FIQ
int mxc_set_irq_fiq(unsigned int irq, unsigned int type)
/* clock source */
-static cycle_t mxc_get_cycles(void)
+static cycle_t mxc_get_cycles(struct clocksource *cs)
{
return __raw_readl(TIMER_BASE + MXC_TCN);
}
}
}
+/**
+ * clk_init_one - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
void clk_init_one(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
#include <linux/clocksource.h>
-static cycle_t omap_32k_read(void)
+static cycle_t omap_32k_read(struct clocksource *cs)
{
return omap_readl(TIMER_32K_SYNCHRONIZED);
}
{
unsigned long long ret;
- ret = (unsigned long long)omap_32k_read();
+ ret = (unsigned long long)omap_32k_read(&clocksource_32k);
ret = (ret * clocksource_32k.mult_orig) >> clocksource_32k.shift;
return ret;
}
{
unsigned long flags;
- spin_lock_irqsave(&dma_chan_lock, flags);
if (dma_chan[lch].dev_id == -1) {
pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
lch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
return;
}
- dma_chan[lch].dev_id = -1;
- dma_chan[lch].next_lch = -1;
- dma_chan[lch].callback = NULL;
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-
if (cpu_class_is_omap1()) {
/* Disable all DMA interrupts for the channel. */
dma_write(0, CICR(lch));
dma_write(0, CCR(lch));
omap_clear_dma(lch);
}
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ dma_chan[lch].dev_id = -1;
+ dma_chan[lch].next_lch = -1;
+ dma_chan[lch].callback = NULL;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
}
EXPORT_SYMBOL(omap_free_dma);
{ .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
{ .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
{ .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 },
+ { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
};
static const char *omap3_dm_source_names[] __initdata = {
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
/*
- * Enable wake-up only for GPT1 on OMAP2 CPUs.
- * FIXME: All timers should have wake-up enabled and clear
- * PRCM status.
+ * Enable wake-up on OMAP2 CPUs.
*/
- if (cpu_class_is_omap2() && (timer == &dm_timers[0]))
+ if (cpu_class_is_omap2())
l |= 1 << 2;
omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
#ifdef CONFIG_ARCH_OMAP1
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int n = (timer - dm_timers) << 1;
u32 l;
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
omap_writel(l, MOD_CONF_CTRL_1);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#else
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
+ int ret = -EINVAL;
+
if (source < 0 || source >= 3)
- return;
+ return -EINVAL;
clk_disable(timer->fclk);
- clk_set_parent(timer->fclk, dm_source_clocks[source]);
+ ret = clk_set_parent(timer->fclk, dm_source_clocks[source]);
clk_enable(timer->fclk);
- /* When the functional clock disappears, too quick writes seem to
- * cause an abort. */
+ /*
+ * When the functional clock disappears, too quick writes seem
+ * to cause an abort. XXX Is this still necessary?
+ */
__delay(150000);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+ reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
if (cpu_is_omap24xx() || cpu_is_omap34xx())
- __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
+ __raw_writel(gpio_mask, reg);
+
+ /* Flush posted write for the irq status to avoid spurious interrupts */
+ __raw_readl(reg);
#endif
}
case METHOD_MPUIO:
case METHOD_GPIO_1610:
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
return -EINVAL;
}
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
void omap_dm_timer_start(struct omap_dm_timer *timer);
void omap_dm_timer_stop(struct omap_dm_timer *timer);
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <mach/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK 0x100
-enum eac_mclk_src {
- EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
- EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
- EAC_MCLK_EXT_12288000,
- EAC_MCLK_EXT_2x11289600,
- EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
- EAC_CODEC_PCM,
- EAC_CODEC_AC97,
- EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
- EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
- /* if enabled, then first data slot (left channel) is signaled as
- * positive level of frame sync EAC.AC_FS */
- unsigned polarity_changed_mode:1;
- /* if enabled, then serial data starts one clock cycle after the
- * of EAC.AC_FS for first audio slot */
- unsigned sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
- enum eac_mclk_src mclk_src;
-
- enum eac_codec_mode codec_mode;
- union {
- struct eac_i2s_conf i2s;
- } codec_conf;
-
- int default_rate; /* audio sampling rate */
-
- int (* set_power)(void *private_data, int dac, int adc);
- int (* register_controls)(void *private_data,
- struct snd_card *card);
- const char *short_name;
-
- void *private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
- int (* init)(struct device *eac_dev);
- void (* cleanup)(struct device *eac_dev);
- /* these callbacks are used to configure & control external MCLK
- * source. NULL if not used */
- int (* enable_ext_clocks)(struct device *eac_dev);
- void (* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/gpioexpander.h
- *
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
-#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
-
-/* Function Prototypes for GPIO Expander functions */
-
-#ifdef CONFIG_GPIOEXPANDER_OMAP
-int read_gpio_expa(u8 *, int);
-int write_gpio_expa(u8 , int);
-#else
-static inline int read_gpio_expa(u8 *val, int addr)
-{
- return 0;
-}
-static inline int write_gpio_expa(u8 val, int addr)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
int transceiver_cap;
int (*transceiver_mode)(struct device *dev, int mode);
int (*select_irda)(struct device *dev, int state);
- /* Very specific to the needs of some platforms (h3,h4)
- * having calls which can sleep in irda_set_speed.
- */
- struct delayed_work gpio_expa;
int rx_channel;
int tx_channel;
unsigned long dest_start;
/* use the internal clock */
unsigned internal_clock:1;
- s16 power_pin;
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
--- /dev/null
+/*
+ * OMAP2/3 GPTIMER support.headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+
+int __init omap2_gp_clockevent_set_gptimer(u8 id);
+
+#endif
+
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
-#include <mach/hardware.h>
+#include <mach/bridge-regs.h>
/*
* Number of timer ticks per jiffy.
/*
* Clocksource handling.
*/
-static cycle_t orion_clksrc_read(void)
+static cycle_t orion_clksrc_read(struct clocksource *cs)
{
return 0xffffffff - readl(TIMER0_VAL);
}
return -ENOMEM;
}
+ memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
+
for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
struct gpio_chip *c = &chips[i].chip;
return 0;
}
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+ uint32_t grer, gfer;
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+ grer |= c->irq_edge_rise & c->irq_mask;
+ gfer |= c->irq_edge_fall & c->irq_mask;
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
{
struct pxa_gpio_chip *c;
else
c->irq_edge_fall &= ~mask;
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
struct pxa_gpio_chip *c = gpio_to_chip(gpio);
c->irq_mask |= GPIO_bit(gpio);
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
}
static struct irq_chip pxa_muxed_gpio_chip = {
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/gpio.h>
#include <linux/io.h>
return ret;
}
+EXPORT_SYMBOL(s3c_gpio_cfgpin);
int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull)
{
return ret;
}
+EXPORT_SYMBOL(s3c_gpio_setpull);
#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX
int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip,
extern struct platform_device s3c_device_rtc;
extern struct platform_device s3c_device_adc;
extern struct platform_device s3c_device_sdi;
+extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_hsmmc0;
extern struct platform_device s3c_device_hsmmc1;
extern struct platform_device s3c_device_hsmmc2;
readl(adc->regs + S3C2410_ADCDLY));
}
-void s3c_adc_try(struct adc_device *adc)
+static void s3c_adc_try(struct adc_device *adc)
{
struct s3c_adc_client *next = adc->ts_pend;
void s3c_adc_release(struct s3c_adc_client *client)
{
/* We should really check that nothing is in progress. */
+ if (adc_dev->cur == client)
+ adc_dev->cur = NULL;
+ if (adc_dev->ts_pend == client)
+ adc_dev->ts_pend = NULL;
+ else {
+ struct list_head *p, *n;
+ struct s3c_adc_client *tmp;
+
+ list_for_each_safe(p, n, &adc_pending) {
+ tmp = list_entry(p, struct s3c_adc_client, pend);
+ if (tmp == client)
+ list_del(&tmp->pend);
+ }
+ }
+
+ if (adc_dev->cur == NULL)
+ s3c_adc_try(adc_dev);
kfree(client);
}
EXPORT_SYMBOL_GPL(s3c_adc_release);
#include <linux/io.h>
#include <linux/gpio.h>
-#include <plat/gpio-core.h>
+#include <mach/gpio-core.h>
#include <mach/hardware.h>
#include <asm/irq.h>
drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
libs-y += arch/avr32/lib/
-CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
-
BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
.PHONY: $(BOOT_TARGETS) install
#include <mach/pm.h>
-static cycle_t read_cycle_count(void)
+static cycle_t read_cycle_count(struct clocksource *cs)
{
return (cycle_t)sysreg_read(COUNT);
}
return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR;
}
-static cycle_t read_cycles(void)
+static cycle_t read_cycles(struct clocksource *cs)
{
return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod);
}
-unsigned long long sched_clock(void)
-{
- return cycles_2_ns(read_cycles());
-}
-
static struct clocksource clocksource_bfin = {
.name = "bfin_cycles",
.rating = 350,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
+unsigned long long sched_clock(void)
+{
+ return cycles_2_ns(read_cycles(&clocksource_bfin));
+}
+
static int __init bfin_clocksource_init(void)
{
set_cyc2ns_scale(get_cclk() / 1000);
# cris object files path
OBJ_ARCH = $(objtree)/arch/cris
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
MACHINE := arch/cris/$(SARCH)
all: zImage
archprepare:
archclean:
- $(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
- $(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+ $(Q)if [ -e arch/cris/boot ]; then \
+ $(MAKE) $(clean)=arch/cris/boot; \
fi
CLEAN_FILES += \
- $(MACHINE)/boot/zImage \
- $(MACHINE)/boot/compressed/decompress.bin \
- $(MACHINE)/boot/compressed/piggy.gz \
- $(MACHINE)/boot/rescue/rescue.bin
+ $(boot)/zImage \
+ $(boot)/compressed/decompress.bin \
+ $(boot)/compressed/piggy.gz \
+ $(boot)/rescue/rescue.bin
# MRPROPER_FILES +=
+++ /dev/null
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img.
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn
+++ /dev/null
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args) args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n) memset((s), 0, (n))
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-unsigned inptr = 0; /* index of next byte to be processed in inbuf
- * After decompression it will contain the
- * compressed size, and head.S will read it.
- */
-
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond, msg) do { \
- if (!(cond)) \
- error(msg); \
- } while (0)
-# define Trace(x) fprintf x
-# define Tracev(x) do { \
- if (verbose) \
- fprintf x; \
- } while (0)
-# define Tracevv(x) do { \
- if (verbose > 1) \
- fprintf x; \
- } while (0)
-# define Tracec(c, x) do { \
- if (verbose && (c)) \
- fprintf x; \
- } while (0)
-# define Tracecv(c, x) do { \
- if (verbose > 1 && (c)) \
- fprintf x; \
- } while (0)
-#else
-# define Assert(cond, msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c, x)
-# define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data; /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
- while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
- *R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
- *R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
- *R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
- *R_SERIAL3_TR_DATA = *s++;
-#endif
- }
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
- int i;
- char *ss = (char *)s;
-
- for (i = 0; i < n; i++)
- ss[i] = c;
-
- return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i = 0; i < __n; i++)
- d[i] = s[i];
-
- return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out = *in;
- out++;
- in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void error(char *x)
-{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted\n");
-
- while (1); /* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
- output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
- char revision;
-
- /* input_data is set in head.S */
- inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- *R_SERIAL0_XOFF = 0;
- *R_SERIAL0_BAUD = 0x99;
- *R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- *R_SERIAL1_XOFF = 0;
- *R_SERIAL1_BAUD = 0x99;
- *R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- *R_GEN_CONFIG = 0x08;
- *R_SERIAL2_XOFF = 0;
- *R_SERIAL2_BAUD = 0x99;
- *R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- *R_GEN_CONFIG = 0x100;
- *R_SERIAL3_XOFF = 0;
- *R_SERIAL3_BAUD = 0x99;
- *R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
- setup_normal_output_buffer();
-
- makecrc();
-
- __asm__ volatile ("move $vr,%0" : "=rm" (revision));
- if (revision < 10) {
- puts("You need an ETRAX 100LX to run linux 2.6\n");
- while (1);
- }
-
- puts("Uncompressing Linux...\n");
- gunzip();
- puts("Done. Now booting the kernel.\n");
-}
movem $r13, [$sp]
push $r10 ; push orig_r10
clear.d [$sp=$sp-4] ; frametype == 0, normal frame
-
+
move.d $sp, $r10
jsr do_multiple_IRQ
-
+
jump ret_from_intr
do_sigtrap:
pop $r0 ; Restore r0.
ba do_sigtrap ; SIGTRAP the offending process.
pop $dccr ; Restore dccr in delay slot.
-
+
.global kernel_execve
kernel_execve:
move.d __NR_execve, $r9
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
+ .long sys_signalfd4
+ .long sys_eventfd2
+ .long sys_epoll_create1
+ .long sys_dup3 /* 330 */
+ .long sys_pipe2
+ .long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have
+++ /dev/null
-#
-# arch/cris/arch-v32/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary -R .note -R .comment
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage: $(obj)/compressed/vmlinux
- @cp $< $@
- @echo ' Kernel: $@ is ready'
+++ /dev/null
-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
- $(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
- $(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
+++ /dev/null
-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
- -I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
- $(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
- $(call if_changed,objcopy)
- cp -p $(obj)/rescue.bin $(objtree)
shadow |= ~readl(dir_oe[priv->minor]) |
(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_lock_irqrestore(&gpio_lock, flags);
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CLRBITS:
spin_lock_irqsave(&gpio_lock, flags);
shadow |= ~readl(dir_oe[priv->minor]) &
~(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_lock_irqrestore(&gpio_lock, flags);
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */
process.o ptrace.o setup.o signal.o traps.o time.o \
cache.o cacheflush.o
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
+ .long sys_signalfd4
+ .long sys_eventfd2
+ .long sys_epoll_create1
+ .long sys_dup3 /* 330 */
+ .long sys_pipe2
+ .long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have
#
-# arch/cris/arch-v10/boot/Makefile
+# arch/cris/boot/Makefile
#
-OBJCOPYFLAGS = -O binary --remove-section=.bss
+objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+
+OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
subdir- := compressed rescue
targets := Image
#
-# arch/cris/arch-v10/boot/compressed/Makefile
+# arch/cris/boot/compressed/Makefile
#
asflags-y += $(LINUXINCLUDE)
ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
+# -I$(srctree)/include/asm/arch
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
+# -I$(srctree)/include/asm/arch
+
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+
+OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS= $(OBJECTS-y) $(obj)/misc.o
OBJCOPYFLAGS = -O binary --remove-section=.bss
quiet_cmd_image = BUILD $@
$(obj)/piggy.gz: $(obj)/../Image FORCE
$(call if_changed,gzip)
-
beq dram_init_finished
nop
-#include "../../lib/dram_init.S"
+#include "../../arch-v10/lib/dram_init.S"
dram_init_finished:
.dword 0
_cmd_line_addr:
.dword 0
-#include "../../lib/hw_settings.S"
+#include "../../arch-v10/lib/hw_settings.S"
.globl input_data
.text
-_start:
+start:
di
;; Start clocks for used blocks.
nop
#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
+#include "../../arch-v32/mach-fs/dram_init.S"
#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
+#include "../../arch-v32/mach-a3/dram_init.S"
#else
#error Only ETRAXFS and ARTPEC-3 supported!
#endif
.dword 0
#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
+#include "../../arch-v32/mach-fs/hw_settings.S"
#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
+#include "../../arch-v32/mach-a3/hw_settings.S"
#else
#error Only ETRAXFS and ARTPEC-3 supported!
#endif
#define KERNEL_LOAD_ADR 0x40004000
-
#include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
#include <hwregs/reg_rdwr.h>
#include <hwregs/reg_map.h>
#include <hwregs/ser_defs.h>
#ifdef CONFIG_CRIS_MACH_ARTPEC3
#include <hwregs/clkgen_defs.h>
#endif
+#else
+#include <arch/svinto.h>
+#endif
/*
* gzip declarations
#define OF(args) args
#define STATIC static
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
- size_t __n);
-
-#define memzero(s, n) memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
+#define memzero(s, n) memset((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
-#define get_byte() inbuf[inptr++]
+#define get_byte() (inbuf[inptr++])
/* Diagnostic functions */
#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Assert(cond, msg) do { \
+ if (!(cond)) \
+ error(msg); \
+ } while (0)
# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+# define Tracev(x) do { \
+ if (verbose) \
+ fprintf x; \
+ } while (0)
+# define Tracevv(x) do { \
+ if (verbose > 1) \
+ fprintf x; \
+ } while (0)
+# define Tracec(c, x) do { \
+ if (verbose && (c)) \
+ fprintf x; \
+ } while (0)
+# define Tracecv(c, x) do { \
+ if (verbose > 1 && (c)) \
+ fprintf x; \
+ } while (0)
#else
-# define Assert(cond,msg)
+# define Assert(cond, msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
+# define Tracec(c, x)
+# define Tracecv(c, x)
#endif
static void flush_window(void);
static void error(char *m);
+static void puts(const char *);
extern char *input_data; /* lives in head.S */
static uch *output_data;
static unsigned long output_ptr;
-static void error(char *m);
-
-static void puts(const char *);
-
/* the "heap" is put directly after the BSS ends, at end */
extern int _end;
/* decompressor info and error messages to serial console */
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
{
reg_ser_rs_stat_din rs;
reg_ser_rw_dout dout = {.data = *s};
REG_WR(ser, regi_ser, rw_dout, dout);
}
+#endif
-static void
-puts(const char *s)
+static void puts(const char *s)
{
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0
+#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser0);
+#else
+ while (!(*R_SERIAL0_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL0_TR_DATA = *s++;
+#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
+#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser1);
+#else
+ while (!(*R_SERIAL1_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL1_TR_DATA = *s++;
+#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
+#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser2);
+#else
+ while (!(*R_SERIAL2_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL2_TR_DATA = *s++;
+#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
+#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser3);
+#else
+ while (!(*R_SERIAL3_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL3_TR_DATA = *s++;
+#endif
#endif
*s++;
}
#endif
}
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
{
int i;
char *ss = (char*)s;
return s;
}
-void*
-memcpy(void* __dest, __const void* __src,
- size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
- for (i=0;i<__n;i++) d[i] = s[i];
+ for (i = 0; i < __n; i++)
+ d[i] = s[i];
return __dest;
}
* (Used for the decompressed data only.)
*/
-static void
-flush_window()
+static void flush_window(void)
{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out = *in;
+ out++;
+ in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
}
-static void
-error(char *x)
+static void error(char *x)
{
- puts("\r\n\n");
+ puts("\n\n");
puts(x);
- puts("\r\n\n -- System halted\n");
+ puts("\n\n -- System halted\n");
while(1); /* Halt */
}
-void
-setup_normal_output_buffer(void)
+void setup_normal_output_buffer(void)
{
output_data = (char *)KERNEL_LOAD_ADR;
}
-static inline void
-serial_setup(reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
{
reg_ser_rw_xoff xoff;
reg_ser_rw_tr_ctrl tr_ctrl;
REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
}
+#endif
-void
-decompress_kernel(void)
+void decompress_kernel(void)
{
char revision;
+ char compile_rev;
+#ifdef CONFIG_ETRAX_ARCH_V32
+ /* Need at least a CRISv32 to run. */
+ compile_rev = 32;
#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
defined(CONFIG_ETRAX_DEBUG_PORT2) || \
defined(CONFIG_ETRAX_DEBUG_PORT3)
hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
#endif
+
#ifdef CONFIG_ETRAX_DEBUG_PORT0
serial_setup(regi_ser0);
#endif
/* input_data is set in head.S */
inbuf = input_data;
+#else /* CRISv10 */
+ /* Need at least a crisv10 to run. */
+ compile_rev = 10;
+
+ /* input_data is set in head.S */
+ inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ *R_SERIAL0_XOFF = 0;
+ *R_SERIAL0_BAUD = 0x99;
+ *R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+ *R_SERIAL1_XOFF = 0;
+ *R_SERIAL1_BAUD = 0x99;
+ *R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+ *R_GEN_CONFIG = 0x08;
+ *R_SERIAL2_XOFF = 0;
+ *R_SERIAL2_BAUD = 0x99;
+ *R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+ *R_GEN_CONFIG = 0x100;
+ *R_SERIAL3_XOFF = 0;
+ *R_SERIAL3_BAUD = 0x99;
+ *R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
setup_normal_output_buffer();
makecrc();
__asm__ volatile ("move $vr,%0" : "=rm" (revision));
- if (revision < 32)
- {
- puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
+ if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+ puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+ puts("You need an ETRAX 100LX to run linux 2.6\n");
+#endif
while(1);
}
- puts("Uncompressing Linux...\r\n");
+ puts("Uncompressing Linux...\n");
gunzip();
- puts("Done. Now booting the kernel.\r\n");
+ puts("Done. Now booting the kernel\n");
}
# Makefile for rescue (bootstrap) code
#
-ccflags-y += -O2 $(LINUXINCLUDE)
+# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
+# -I$(srctree)/include/asm/arch
+# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
+# LD = gcc-cris -mlinux -march=v32 -nostdlib
+
asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
+ccflags-y += -O2 $(LINUXINCLUDE)
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
+obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS := $(obj-y)
targets := rescue.o rescue.bin
-$(obj)/rescue.o: $(OBJECT) FORCE
+$(obj)/rescue.o: $(OBJECTS) FORCE
$(call if_changed,ld)
$(obj)/rescue.bin: $(obj)/rescue.o FORCE
dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
rm tr.bin tmp2423 testrescue_tmp.bin
+
$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
# Pad it to 784 bytes, that's what the rescue loader expects
cat ktr.bin tmp2423 >kimagerescue_tmp.bin
dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
rm ktr.bin tmp2423 kimagerescue_tmp.bin
+
#endif
;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
+#include "../../../arch-v10/lib/dram_init.S"
;; we now should go through the checksum-table and check the listed
;; partitions for errors.
#define __NR_mbind 274
#define __NR_get_mempolicy 275
#define __NR_set_mempolicy 276
-#define __NR_mq_open 277
+#define __NR_mq_open 277
#define __NR_mq_unlink (__NR_mq_open+1)
#define __NR_mq_timedsend (__NR_mq_open+2)
#define __NR_mq_timedreceive (__NR_mq_open+3)
#define __NR_fallocate 324
#define __NR_timerfd_settime 325
#define __NR_timerfd_gettime 326
+#define __NR_signalfd4 327
+#define __NR_eventfd2 328
+#define __NR_epoll_create1 329
+#define __NR_dup3 330
+#define __NR_pipe2 331
+#define __NR_inotify_init1 332
+#define __NR_preadv 333
+#define __NR_pwritev 334
#ifdef __KERNEL__
-#define NR_syscalls 327
+#define NR_syscalls 335
#include <arch/unistd.h>
do { \
__debug_bug_trap(signr); \
asm volatile("nop"); \
-} while(0)
+} while(1)
#define HAVE_ARCH_BUG
#define BUG() \
#define HAVE_ARCH_KGDB_BAD_PAGE
#define kgdb_bad_page(page) do { kgdb_raise(SIGABRT); } while(0)
#endif
-#endif
+
+#endif /* CONFIG_BUG */
#include <asm-generic/bug.h>
+++ /dev/null
-#ifndef _ASM_INIT_H
-#define _ASM_INIT_H
-
-#define __init __attribute__ ((__section__ (".text.init")))
-#define __initdata __attribute__ ((__section__ (".data.init")))
-/* For assembly routines */
-#define __INIT .section ".text.init",#alloc,#execinstr
-#define __FINIT .previous
-#define __INITDATA .section ".data.init",#alloc,#write
-
-#endif
-
#define __NR_dup3 330
#define __NR_pipe2 331
#define __NR_inotify_init1 332
+#define __NR_preadv 333
+#define __NR_pwritev 334
#ifdef __KERNEL__
-#define NR_syscalls 333
+#define NR_syscalls 335
#define __ARCH_WANT_IPC_PARSE_VERSION
/* #define __ARCH_WANT_OLD_READDIR */
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
syscall_table_size = (. - sys_call_table)
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __400_LCR 0xfe000100
#define __400_LSBR 0xfe000c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __400_LCR 0xfe000100
#define __400_LSBR 0xfe000c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __400_LCR 0xfe000100
#define __400_LSBR 0xfe000c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/ptrace.h>
#define __551_LCR 0xfeff1100
#define __551_LSBR 0xfeff1c00
- .section .text.init,"ax"
+ __INIT
.balign 4
###############################################################################
* 2 of the License, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
# command line string
#
###############################################################################
- .section .text.head,"ax"
+ __HEAD
.balign 4
.globl _boot, __head_reference
#include <asm/io.h>
#ifdef CONFIG_BLK_DEV_INITRD
-#include <linux/blk.h>
#include <asm/pgtable.h>
#endif
_sinittext = .;
.init.text : {
- *(.text.head)
+ HEAD_TEXT
#ifndef CONFIG_DEBUG_INFO
INIT_TEXT
EXIT_TEXT
struct pci_bus *__nongpreldata pci_root_bus;
struct pci_ops *__nongpreldata pci_root_ops;
+/*
+ * The accessible PCI window does not cover the entire CPU address space, but
+ * there are devices we want to access outside of that window, so we need to
+ * insert specific PCI bus resources instead of using the platform-level bus
+ * resources directly for the PCI root bus.
+ *
+ * These are configured and inserted by pcibios_init() and are attached to the
+ * root bus by pcibios_fixup_bus().
+ */
+static struct resource pci_ioport_resource = {
+ .name = "PCI IO",
+ .start = 0,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
+static struct resource pci_iomem_resource = {
+ .name = "PCI mem",
+ .start = 0,
+ .end = -1,
+ .flags = IORESOURCE_MEM,
+};
+
/*
* Functions for accessing PCI configuration space
*/
#if 0
printk("### PCIBIOS_FIXUP_BUS(%d)\n",bus->number);
#endif
+
+ if (bus->number == 0) {
+ bus->resource[0] = &pci_ioport_resource;
+ bus->resource[1] = &pci_iomem_resource;
+ }
+
pci_read_bridge_bases(bus);
if (bus->number == 0) {
/* enable PCI arbitration */
__reg_MB86943_pci_arbiter = MB86943_PCIARB_EN;
- ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
- ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
- ioport_resource.end += ioport_resource.start;
+ pci_ioport_resource.start = (__reg_MB86943_sl_pci_io_base << 9) & 0xfffffc00;
+ pci_ioport_resource.end = (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
+ pci_ioport_resource.end += pci_ioport_resource.start;
printk("PCI IO window: %08llx-%08llx\n",
- (unsigned long long) ioport_resource.start,
- (unsigned long long) ioport_resource.end);
+ (unsigned long long) pci_ioport_resource.start,
+ (unsigned long long) pci_ioport_resource.end);
- iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+ pci_iomem_resource.start = (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
+ pci_iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
+ pci_iomem_resource.end += pci_iomem_resource.start;
- /* Reserve somewhere to write to flush posted writes. */
- iomem_resource.start += 0x400;
-
- iomem_resource.end = (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
- iomem_resource.end += iomem_resource.start;
+ /* Reserve somewhere to write to flush posted writes. This is used by
+ * __flush_PCI_writes() from asm/io.h to force the write FIFO in the
+ * CPU-PCI bridge to flush as this doesn't happen automatically when a
+ * read is performed on the MB93090 development kit motherboard.
+ */
+ pci_iomem_resource.start += 0x400;
printk("PCI MEM window: %08llx-%08llx\n",
- (unsigned long long) iomem_resource.start,
- (unsigned long long) iomem_resource.end);
+ (unsigned long long) pci_iomem_resource.start,
+ (unsigned long long) pci_iomem_resource.end);
printk("PCI DMA memory: %08lx-%08lx\n",
dma_coherent_mem_start, dma_coherent_mem_end);
+ if (insert_resource(&iomem_resource, &pci_iomem_resource) < 0)
+ panic("Unable to insert PCI IOMEM resource\n");
+ if (insert_resource(&ioport_resource, &pci_ioport_resource) < 0)
+ panic("Unable to insert PCI IOPORT resource\n");
+
if (!pci_probe)
return -ENXIO;
--- /dev/null
+#ifndef _ASM_IA64_IDLE_H
+#define _ASM_IA64_IDLE_H
+
+static inline void enter_idle(void) { }
+static inline void exit_idle(void) { }
+
+#endif /* _ASM_IA64_IDLE_H */
register unsigned long ia64_intri_res asm ("r8"); \
register unsigned long __reg asm ("r8") = (reg); \
\
- BUILD_BUG_ON(!__builtin_constant_p(reg)); \
asm volatile (paravirt_alt_bundle(__PARAVIRT_BR, \
PARAVIRT_TYPE(GETREG) \
+ (reg)) \
register unsigned long ia64_clobber1 asm ("r8"); \
register unsigned long ia64_clobber2 asm ("r9"); \
\
- BUILD_BUG_ON(!__builtin_constant_p(reg)); \
asm volatile (paravirt_alt_bundle(__PARAVIRT_BR, \
PARAVIRT_TYPE(SETREG) \
+ (reg)) \
extern char no_int_routing __devinitdata;
extern cpumask_t cpu_core_map[NR_CPUS];
-DECLARE_PER_CPU(cpumask_t, cpu_sibling_map);
+DECLARE_PER_CPU_SHARED_ALIGNED(cpumask_t, cpu_sibling_map);
extern int smp_num_siblings;
extern void __iomem *ipi_base_addr;
extern unsigned char smp_int_redirect;
return !(ia64_psr(regs)->i);
}
-static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+static inline void handle_irq(int irq, struct pt_regs *regs)
{
- struct pt_regs *old_regs;
- old_regs = set_irq_regs(regs);
- irq_enter();
__do_IRQ(irq);
- irq_exit();
- set_irq_regs(old_regs);
}
#define irq_ctx_init(cpu) do { } while (0)
static void __iomem *cyclone_mc;
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
{
return (cycle_t)readq((void __iomem *)cyclone_mc);
}
static void *ia64_swiotlb_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
{
- if (dev->coherent_dma_mask != DMA_64BIT_MASK)
+ if (dev->coherent_dma_mask != DMA_BIT_MASK(64))
gfp |= GFP_DMA;
return swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
}
{
platform_send_ipi(cpu, IA64_IPI_RESCHEDULE, IA64_IPI_DM_INT, 0);
}
+EXPORT_SYMBOL_GPL(smp_send_reschedule);
/*
* Called with preemption disabled.
return;
}
+ smp_call_function_mask(mm->cpu_vm_mask,
+ (void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
+ local_irq_disable();
+ local_finish_flush_tlb_mm(mm);
+ local_irq_enable();
preempt_enable();
- /*
- * We could optimize this further by using mm->cpu_vm_mask to track which CPUs
- * have been running in the address space. It's not clear that this is worth the
- * trouble though: to avoid races, we have to raise the IPI on the target CPU
- * anyhow, and once a CPU is interrupted, the cost of local_flush_tlb_all() is
- * rather trivial.
- */
- on_each_cpu((void (*)(void *))local_finish_flush_tlb_mm, mm, 1);
}
void arch_send_call_function_single_ipi(int cpu)
#include "fsyscall_gtod_data.h"
-static cycle_t itc_get_cycles(void);
+static cycle_t itc_get_cycles(struct clocksource *cs);
struct fsyscall_gtod_data_t fsyscall_gtod_data = {
.lock = SEQLOCK_UNLOCKED,
}
}
-static cycle_t itc_get_cycles(void)
+static cycle_t itc_get_cycles(struct clocksource *cs)
{
u64 lcycle, now, ret;
int r;
again:
- preempt_disable();
- local_irq_disable();
-
if (signal_pending(current)) {
- local_irq_enable();
- preempt_enable();
r = -EINTR;
kvm_run->exit_reason = KVM_EXIT_INTR;
goto out;
}
+ /*
+ * down_read() may sleep and return with interrupts enabled
+ */
+ down_read(&vcpu->kvm->slots_lock);
+
+ preempt_disable();
+ local_irq_disable();
+
vcpu->guest_mode = 1;
kvm_guest_enter();
- down_read(&vcpu->kvm->slots_lock);
r = vti_vcpu_run(vcpu, kvm_run);
if (r < 0) {
local_irq_enable();
extern unsigned long sn_rtc_cycles_per_second;
-static cycle_t read_sn2(void)
+static cycle_t read_sn2(struct clocksource *cs)
{
return (cycle_t)readq(RTC_COUNTER_ADDR);
}
#define isBP p3 // are we the Bootstrap Processor?
- .text
-
GLOBAL_ENTRY(xen_setup_hook)
mov r8=XEN_PV_DOMAIN_ASM
(isBP) movl r9=xen_domain_type;;
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
piggy.o vmlinux.lds
-EXTRA_AFLAGS := -traditional
OBJECTS = $(obj)/head.o $(obj)/misc.o
* This file contains M32R architecture specific macro definitions.
*/
+#include <linux/stringify.h>
+
+#undef __STR
-#ifndef __STR
#ifdef __ASSEMBLY__
#define __STR(x) x
#else
-#define __STR(x) #x
+#define __STR(x) __stringify(x)
#endif
-#endif /* __STR */
#ifdef CONFIG_SMP
#define M32R_LOCK __STR(lock)
obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_MODULES) += module.o
-
-EXTRA_AFLAGS := -traditional
/*
* References to members of the boot_cpu_data structure.
*/
-.section .text.head, "ax"
+__HEAD
.global start_kernel
.global __bss_start
.global _end
_text = .; /* Text and read-only data */
.boot : { *(.boot) } = 0
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:42 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:52 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_BINFMT_MISC=m
CONFIG_ZORRO=y
CONFIG_AMIGA_PCMCIA=y
-# CONFIG_HEARTBEAT is not set
+CONFIG_HEARTBEAT=y
CONFIG_PROC_HARDWARE=y
CONFIG_ISA=y
CONFIG_GENERIC_ISA_DMA=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
# CONFIG_BLK_DEV_IDEDMA is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_SCSI_A4000T=y
CONFIG_SCSI_ZORRO7XX=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
#
# Serial drivers
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
#
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_MULTIFACE_III_TTY=m
-# CONFIG_SERIAL_CONSOLE is not set
+CONFIG_SERIAL_CONSOLE=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
#
# DOS/FAT/NT Filesystems
#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=m
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Block modes
#
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:43 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:54 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:44 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:56 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_ARPD is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATARI_SCSI=y
# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
# CONFIG_ATARI_SCSI_RESET_BOOT is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_ATARI_KBD_CORE=y
CONFIG_KEYBOARD_ATARI=y
CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
#
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
+CONFIG_SERIAL_CONSOLE=y
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=m
+CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V4=y
+# CONFIG_ROOT_NFS is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=m
+CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Block modes
#
-CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:45 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:47:59 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_BVME6000_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_BVME6000_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=m
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:46 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:01 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_HPLANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:47 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:03 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_SWIM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
CONFIG_SCSI_MAC_ESP=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_MACSONIC=m
CONFIG_MACMACE=y
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:48 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:06 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_BLK_DEV=y
CONFIG_AMIGA_FLOPPY=y
CONFIG_ATARI_FLOPPY=y
+CONFIG_BLK_DEV_SWIM=y
CONFIG_AMIGA_Z2RAM=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
-CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
CONFIG_BLK_DEV_FALCON_IDE=y
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
CONFIG_BVME6000_SCSI=y
CONFIG_SUN3X_ESP=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
CONFIG_INPUT_ADBHID=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-CONFIG_ARIADNE=m
-CONFIG_A2065=m
-CONFIG_HYDRA=m
-CONFIG_ZORRO8390=m
-CONFIG_APNE=m
+CONFIG_ARIADNE=y
+CONFIG_A2065=y
+CONFIG_HYDRA=y
+CONFIG_ZORRO8390=y
+CONFIG_APNE=y
CONFIG_MAC8390=y
-CONFIG_MAC89x0=m
-CONFIG_MACSONIC=m
+CONFIG_MAC89x0=y
+CONFIG_MACSONIC=y
CONFIG_MACMACE=y
CONFIG_MVME147_NET=y
CONFIG_MVME16x_NET=y
CONFIG_BVME6000_NET=y
-CONFIG_ATARILANCE=m
+CONFIG_ATARILANCE=y
CONFIG_SUN3LANCE=y
CONFIG_HPLANCE=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_KEYBOARD_HIL_OLD=y
CONFIG_KEYBOARD_HIL=y
CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_AMIGA=m
CONFIG_MOUSE_ATARI=m
# CONFIG_MOUSE_VSXXXAA is not set
-CONFIG_MOUSE_HIL=m
+CONFIG_MOUSE_HIL=y
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_M68K_BEEP=m
# CONFIG_INPUT_UINPUT is not set
-CONFIG_HP_SDC_RTC=m
+CONFIG_HP_SDC_RTC=y
#
# Hardware I/O ports
#
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_Q40KBD=m
+CONFIG_SERIO_Q40KBD=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_HP_SDC=y
CONFIG_HIL_MLC=y
-CONFIG_SERIO_LIBPS2=y
+CONFIG_SERIO_LIBPS2=m
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
CONFIG_VT_HW_CONSOLE_BINDING=y
# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
-CONFIG_A2232=m
+CONFIG_A2232=y
#
# Serial drivers
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
-CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC=y
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
#
-CONFIG_ATARI_MFPSER=m
-CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_MFPSER=y
+CONFIG_ATARI_MIDI=y
CONFIG_ATARI_DSP56K=m
CONFIG_AMIGA_BUILTIN_SERIAL=y
CONFIG_MULTIFACE_III_TTY=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:50 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:08 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME147_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MVME147_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:51 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:10 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
CONFIG_53C700_BE_BUS=y
# CONFIG_SCSI_DEBUG is not set
CONFIG_MVME16x_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MVME16x_NET=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:52 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:13 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDESCSI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_MII is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:53 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:16 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3_SCSI=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
CONFIG_SUN3_82586=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc7
-# Tue Dec 2 20:27:54 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed Apr 22 20:48:20 2009
#
CONFIG_M68K=y
CONFIG_MMU=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
# CONFIG_FREEZER is not set
#
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# General setup
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+# CONFIG_IP_DCCP_CCID3 is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_ATA_OVER_ETH=m
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SUN3X_ESP=y
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_SUN3LANCE=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# Non-8250 serial port support
#
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
-CONFIG_STAGING_EXCLUDE_BUILD=y
#
# Character devices
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_OCFS2_FS_STATS is not set
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
-# CONFIG_OCFS2_COMPAT_JBD is not set
+# CONFIG_OCFS2_FS_POSIX_ACL is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QUOTA_TREE=m
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=y
# CONFIG_OMFS_FS is not set
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#define __NR_dup3 326
#define __NR_pipe2 327
#define __NR_inotify_init1 328
+#define __NR_preadv 329
+#define __NR_pwritev 330
#ifdef __KERNEL__
-#define NR_syscalls 329
+#define NR_syscalls 331
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev /* 330 */
#endif
.endm
-.section ".text.head","ax"
+__HEAD
ENTRY(_stext)
/*
* Version numbers of the bootinfo interface
#include <linux/linkage.h>
+#include <linux/init.h>
#include <asm/entry.h>
#include <asm/page.h>
.globl kernel_pg_dir
.equ kernel_pg_dir,kernel_pmd_table
- .section .text.head
+ __HEAD
ENTRY(_stext)
ENTRY(_start)
. = 0x1000;
_text = .; /* Text and read-only data */
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
. = 0xE002000;
_text = .; /* Text and read-only data */
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
config NO_DMA
bool
+ depends on !COLDFIRE
default y
config FPU
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# RAM/ROM/Flash chip drivers
#
-CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PHYSMAP is not set
CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_PLATRAM is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC=y
# CONFIG_FEC2 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=115200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_DAB=y
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_SYSFS is not set
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
CONFIG_FULLDEBUG=y
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
# Security options
#
# CONFIG_KEYS is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:32:41 2009
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
# CONFIG_SYSVIPC is not set
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
-# CONFIG_NET is not set
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+CONFIG_PPP=y
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+# CONFIG_PPP_ASYNC is not set
+# CONFIG_PPP_SYNC_TTY is not set
+# CONFIG_PPP_DEFLATE is not set
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=y
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_DAB=y
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc6
-# Wed Jun 25 11:52:42 2008
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 17:17:30 2009
#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_M68K=y
+# CONFIG_MMU is not set
+# CONFIG_FPU is not set
+CONFIG_ZONE_DMA=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
+CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_NO_IOPORT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
+# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-CONFIG_MACH_PCM037=y
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_FREEZER is not set
+
+#
+# Processor type and features
+#
+# CONFIG_M68328 is not set
+# CONFIG_M68EZ328 is not set
+# CONFIG_M68VZ328 is not set
+# CONFIG_M68360 is not set
+# CONFIG_M5206 is not set
+# CONFIG_M5206e is not set
+# CONFIG_M520x is not set
+# CONFIG_M523x is not set
+# CONFIG_M5249 is not set
+# CONFIG_M5271 is not set
+CONFIG_M5272=y
+# CONFIG_M5275 is not set
+# CONFIG_M528x is not set
+# CONFIG_M5307 is not set
+# CONFIG_M532x is not set
+# CONFIG_M5407 is not set
+CONFIG_COLDFIRE=y
+CONFIG_CLOCK_SET=y
+CONFIG_CLOCK_FREQ=66666666
+CONFIG_CLOCK_DIV=1
+
+#
+# Platform
+#
+# CONFIG_UC5272 is not set
+CONFIG_M5272C3=y
+# CONFIG_COBRA5272 is not set
+# CONFIG_CANCam is not set
+# CONFIG_SCALES is not set
+# CONFIG_NETtel is not set
+# CONFIG_CPU16B is not set
+# CONFIG_MOD5272 is not set
+CONFIG_FREESCALE=y
+CONFIG_4KSTACKS=y
+CONFIG_HZ=100
#
-# Bus support
+# RAM configuration
#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
+CONFIG_RAMBASE=0x00000000
+CONFIG_RAMSIZE=0x00800000
+CONFIG_VECTORBASE=0x00000000
+CONFIG_KERNELBASE=0x00020000
+CONFIG_RAMAUTOBIT=y
+# CONFIG_RAM8BIT is not set
+# CONFIG_RAM16BIT is not set
+# CONFIG_RAM32BIT is not set
#
-# Kernel Features
+# ROM configuration
#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ROM is not set
+CONFIG_RAMKERNEL=y
+# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
+# CONFIG_UNEVICTABLE_LRU is not set
#
-# Floating point emulation
+# Executable file formats
#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_FLAT=y
+# CONFIG_BINFMT_ZFLAT is not set
+# CONFIG_BINFMT_SHARED_FLAT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Generic Driver Options
#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
#
#
# RAM/ROM/Flash chip drivers
#
-CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-# CONFIG_MTD_CFI_ADV_OPTIONS is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-# CONFIG_MTD_CFI_AMDSTD is not set
-# CONFIG_MTD_CFI_STAA is not set
-# CONFIG_MTD_RAM is not set
+CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
+# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_SMC911X is not set
-CONFIG_SMSC911X=y
+# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
+CONFIG_FEC=y
+# CONFIG_FEC2 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
#
# Non-8250 serial port support
#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_MCF=y
+CONFIG_SERIAL_MCF_BAUDRATE=19200
+CONFIG_SERIAL_MCF_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
-CONFIG_HAVE_GPIO_LIB=y
-
-#
-# GPIO Support
-#
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
-# CONFIG_HTC_EGPIO is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# Multimedia drivers
#
-# CONFIG_DAB is not set
+CONFIG_DAB=y
#
# Graphics support
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
#
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
+# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+# CONFIG_FULLDEBUG is not set
+# CONFIG_HIGHPROFILE is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
+# CONFIG_NO_KERNEL_MSG is not set
+# CONFIG_BDM_DISABLE is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 23:29:01 2009
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_FEC=y
CONFIG_FEC2=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-# CONFIG_NFS_FS is not set
-# CONFIG_NFSD is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+# CONFIG_NETWORK_FILESYSTEMS is not set
#
# Partition Types
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
+# Linux kernel version: 2.6.30-rc2
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_USER_SCHED is not set
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
#
# CONFIG_ARN5307 is not set
CONFIG_M5307C3=y
-# CONFIG_eLIA is not set
# CONFIG_SECUREEDGEMP3 is not set
# CONFIG_CLEOPATRA is not set
# CONFIG_NETtel is not set
CONFIG_FREESCALE=y
-# CONFIG_4KSTACKS is not set
+CONFIG_4KSTACKS=y
CONFIG_HZ=100
#
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_UCLINUX=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
CONFIG_UNIX98_PTYS=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
CONFIG_FULLDEBUG=y
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc1
-# Wed May 7 10:25:16 2008
+# Linux kernel version: 2.6.30-rc2
+# Thu Apr 23 09:21:40 2009
#
CONFIG_M68K=y
# CONFIG_MMU is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_TIME_LOW_RES=y
+# CONFIG_GENERIC_CLOCKEVENTS is not set
CONFIG_NO_IOPORT=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
-# CONFIG_UID16 is not set
-# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
+# CONFIG_AIO is not set
# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_HAVE_KRETPROBES is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
-CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Processor type and features
# CONFIG_ROM is not set
CONFIG_RAMKERNEL=y
# CONFIG_ROMKERNEL is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_VIRT_TO_BUS=y
+# CONFIG_UNEVICTABLE_LRU is not set
CONFIG_ISA_DMA_API=y
-#
-# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
-#
-# CONFIG_PCI is not set
-# CONFIG_COMEMPCI is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
# CONFIG_BINFMT_ZFLAT is not set
# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_AOUT is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
# CONFIG_PM is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AR7_PARTS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
-# CONFIG_SERIO is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_COLDFIRE is not set
CONFIG_SERIAL_MCF=y
CONFIG_SERIAL_MCF_BAUDRATE=19200
CONFIG_SERIAL_MCF_CONSOLE=y
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
-# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_FILE_LOCKING is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+# CONFIG_ROMFS_BACKED_BY_BLOCK is not set
+CONFIG_ROMFS_BACKED_BY_MTD=y
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_MTD=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_SAMPLES is not set
# CONFIG_FULLDEBUG is not set
# CONFIG_HIGHPROFILE is not set
-# CONFIG_BOOTPARAM is not set
+CONFIG_BOOTPARAM=y
+CONFIG_BOOTPARAM_STRING="root=/dev/mtdblock0"
# CONFIG_NO_KERNEL_MSG is not set
# CONFIG_BDM_DISABLE is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
- /* offsets into the kernel_stat struct */
- DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
/* offsets into the irq_cpustat_t struct */
DEFINE(CPUSTAT_SOFTIRQ_PENDING, offsetof(irq_cpustat_t, __softirq_pending));
DEFINE(PT_VECTOR, offsetof(struct pt_regs, pc) + 4);
#endif
- /* offsets into the kernel_stat struct */
- DEFINE(STAT_IRQ, offsetof(struct kernel_stat, irqs));
-
/* signal defines */
DEFINE(SIGSEGV, SIGSEGV);
DEFINE(SEGV_MAPERR, SEGV_MAPERR);
#include <linux/types.h>
#include <linux/mm.h>
-#include <linux/string.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
-#include <asm/io.h>
+#include <asm/cacheflush.h>
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
free_pages((unsigned long)vaddr, get_order(size));
}
-void dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir)
+void dma_sync_single_for_device(struct device *dev, dma_addr_t handle,
+ size_t size, enum dma_data_direction dir)
{
+ switch (dir) {
+ case DMA_TO_DEVICE:
+ flush_dcache_range(handle, size);
+ break;
+ case DMA_FROM_DEVICE:
+ /* Should be clear already */
+ break;
+ default:
+ if (printk_ratelimit())
+ printk("dma_sync_single_for_device: unsupported dir %u\n", dir);
+ break;
+ }
+}
+
+EXPORT_SYMBOL(dma_sync_single_for_device);
+dma_addr_t dma_map_single(struct device *dev, void *addr, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t handle = virt_to_phys(addr);
+ flush_dcache_range(handle, size);
+ return handle;
}
+EXPORT_SYMBOL(dma_map_single);
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir)
+{
+ dma_addr_t handle = page_to_phys(page) + offset;
+ dma_sync_single_for_device(dev, handle, size, dir);
+ return handle;
+}
+EXPORT_SYMBOL(dma_map_page);
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev /* 330 */
.rept NR_syscalls-(.-sys_call_table)/4
.long sys_ni_syscall
. = ALIGN(4);
_sdata = . ;
DATA_DATA
+ . = ALIGN(32);
+ *(.data.cacheline_aligned)
. = ALIGN(8192) ;
*(.data.init_task)
_edata = . ;
m527x_fec_irq_init(0);
/* Set multi-function pins to ethernet mode for fec0 */
+#if defined(CONFIG_M5271)
+ v = readb(MCF_IPSBAR + 0x100047);
+ writeb(v | 0xf0, MCF_IPSBAR + 0x100047);
+#else
par = readw(MCF_IPSBAR + 0x100082);
writew(par | 0xf00, MCF_IPSBAR + 0x100082);
v = readb(MCF_IPSBAR + 0x100078);
writeb(v | 0xc0, MCF_IPSBAR + 0x100078);
+#endif
#ifdef CONFIG_FEC2
m527x_fec_irq_init(1);
/***************************************************************************/
-static cycle_t m68328_read_clk(void)
+static cycle_t m68328_read_clk(struct clocksource *cs)
{
unsigned long flags;
u32 cycles;
#define DMA_DTMR_CLK_DIV_16 (2 << 1)
#define DMA_DTMR_ENABLE (1 << 0)
-static cycle_t cf_dt_get_cycles(void)
+static cycle_t cf_dt_get_cycles(struct clocksource *cs)
{
return __raw_readl(DTCN0);
}
/***************************************************************************/
-static cycle_t pit_read_clk(void)
+static cycle_t pit_read_clk(struct clocksource *cs)
{
unsigned long flags;
u32 cycles;
/***************************************************************************/
-static cycle_t mcftmr_read_clk(void)
+static cycle_t mcftmr_read_clk(struct clocksource *cs)
{
unsigned long flags;
u32 cycles;
endif
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_DIV) += -mno-xl-soft-div
CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_BARREL) += -mxl-barrel-shift
-CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP) += -mxl-pattern-compare
+CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# The various CONFIG_XILINX cpu features options are integers 0/1/2...
# rather than bools y/n
-CFLAGS += $(CPUFLAGS-1)
-CFLAGS += $(CPUFLAGS-2)
# r31 holds current when in kernel mode
-CFLAGS += -ffixed-r31
+CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
-LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
head-y := arch/microblaze/kernel/head.o
libs-y += arch/microblaze/lib/ $(LIBGCC)
#define __disable_dcache() _disable_dcache()
#define __invalidate_dcache(addr) _invalidate_dcache(addr)
-/* FIXME - I don't think this is right */
-#ifdef CONFIG_XILINX_UNCACHED_SHADOW
-#define UNCACHED_SHADOW_MASK (CONFIG_XILINX_ERAM_SIZE)
-#endif
-
#endif /* _ASM_MICROBLAZE_CACHE_H */
DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
-DECLARE_PER_CPU(unsigned int, SYSCALL_SAVE); /* Saved syscall number */
# endif /* __ASSEMBLY__ */
+/* noMMU hasn't any space for args */
+# define STATE_SAVE_ARG_SPACE (0)
+
#endif /* _ASM_MICROBLAZE_ENTRY_H */
asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
int fsr, int addr);
+void die(const char *str, struct pt_regs *fp, long err);
+void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
+
#if defined(CONFIG_XMON)
extern void xmon(struct pt_regs *regs);
extern int xmon_bpt(struct pt_regs *regs);
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/types.h>
-#include <asm/page.h>
#define IO_SPACE_LIMIT (0xFFFFFFFF)
{},
};
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
- return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
- of_unregister_driver(drv);
-}
-
/* Platform devices and busses creation */
extern struct of_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
#include <asm/setup.h>
#include <asm/registers.h>
#include <asm/segment.h>
+#include <asm/entry.h>
+#include <asm/current.h>
# ifndef __ASSEMBLY__
/* from kernel/cpu/mb.c */
# endif /* __ASSEMBLY__ */
+#define task_pt_regs(tsk) \
+ (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
+
+/* Do necessary setup to start up a newly executed thread. */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
+
/*
* User space process size: memory size
*
struct thread_struct { };
# define INIT_THREAD { }
-/* Do necessary setup to start up a newly executed thread. */
-static inline void start_thread(struct pt_regs *regs,
- unsigned long pc,
- unsigned long usp)
-{
- regs->pc = pc;
- regs->r1 = usp;
- regs->kernel_mode = 0;
-}
-
/* Free all resources held by a thread. */
static inline void release_thread(struct task_struct *dead_task)
{
*/
extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
-# define task_pt_regs(tsk) \
- (((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
-
# define KSTK_EIP(tsk) (0)
# define KSTK_ESP(tsk) (0)
microblaze_reg_t ear;
microblaze_reg_t esr;
microblaze_reg_t fsr;
- int kernel_mode;
+ int pt_mode;
};
-#define kernel_mode(regs) ((regs)->kernel_mode)
+#define kernel_mode(regs) ((regs)->pt_mode)
#define user_mode(regs) (!kernel_mode(regs))
#define instruction_pointer(regs) ((regs)->pc)
#define SO_MARK 36
+#define SO_TIMESTAMPING 37
+#define SCM_TIMESTAMPING SO_TIMESTAMPING
+
#endif /* _ASM_MICROBLAZE_SOCKET_H */
#define __NR_sendmsg 360 /* new */
#define __NR_recvmsg 361 /* new */
#define __NR_accept04 362 /* new */
+#define __NR_preadv 363 /* new */
+#define __NR_pwritev 364 /* new */
-#define __NR_syscalls 363
+#define __NR_syscalls 365
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
DEFINE(PT_R29, offsetof(struct pt_regs, r29));
DEFINE(PT_R30, offsetof(struct pt_regs, r30));
DEFINE(PT_R31, offsetof(struct pt_regs, r31));
- DEFINE(PT_MODE, offsetof(struct pt_regs, kernel_mode));
+ DEFINE(PT_MODE, offsetof(struct pt_regs, pt_mode));
BLANK();
/* Magic offsets for PTRACE PEEK/POKE etc */
void _disable_dcache(void)
{
- if (cpuinfo.use_dcache) {
#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
__asm__ __volatile__ (" \
msrclr r0, %0; \
: "i" (MSR_DCE) \
: "memory", "r12");
#endif
- }
}
void _invalidate_dcache(unsigned int addr)
{
- if (cpuinfo.use_dcache)
__asm__ __volatile__ (" \
wdc %0, r0" \
: \
int temp; /* for saving temp value */
get_pvr(&pvr);
+ CI(ver_code, VERSION);
+ if (!ci->ver_code) {
+ printk(KERN_ERR "ERROR: MB has broken PVR regs "
+ "-> use DTS setting\n");
+ return;
+ }
+
temp = PVR_USE_BARREL(pvr) | PVR_USE_MSR_INSTR(pvr) |\
PVR_USE_PCMP_INSTR(pvr) | PVR_USE_DIV(pvr);
if (ci->use_instr != temp)
CI(mmu, USE_MMU);
- CI(ver_code, VERSION);
-
CI(use_icache, USE_ICACHE);
CI(icache_tagbits, ICACHE_ADDR_TAG_BITS);
CI(icache_write, ICACHE_ALLOW_WR);
#include <asm/cpuinfo.h>
#include <asm/pvr.h>
-const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
-const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
#define err_printk(x) \
early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
__func__);
set_cpuinfo_static(&cpuinfo, cpu);
break;
-/* FIXME I found weird behavior with MB 7.00.a/b
+/* FIXME I found weird behavior with MB 7.00.a/b 7.10.a
* please do not use FULL PVR with MMU */
case 1:
printk(KERN_INFO "%s: Using full CPU PVR support\n",
cpuinfo.hw_debug ? "yes" : "no");
count += seq_printf(m,
- "PVR-USR1:\t%x\n"
- "PVR-USR2:\t%x\n",
+ "PVR-USR1:\t%02x\n"
+ "PVR-USR2:\t%08x\n",
cpuinfo.pvr_user1,
cpuinfo.pvr_user2);
unsigned retries = 10000;
/* read status bit - 0x8 offset */
- while (retries-- && (in_be32(base_addr + 8) & (1 << 3)))
+ while (--retries && (in_be32(base_addr + 8) & (1 << 3)))
;
/* Only attempt the iowrite if we didn't timeout */
{
static atomic_t bus_no_reg_magic;
struct device_node *node = dev->node;
- char *name = dev->dev.bus_id;
const u32 *reg;
u64 addr;
int magic;
if (reg) {
addr = of_translate_address(node, reg);
if (addr != OF_BAD_ADDR) {
- snprintf(name, BUS_ID_SIZE,
- "%llx.%s", (unsigned long long)addr,
- node->name);
+ dev_set_name(&dev->dev, "%llx.%s",
+ (unsigned long long)addr, node->name);
return;
}
}
* counter (and pray...)
*/
magic = atomic_add_return(1, &bus_no_reg_magic);
- snprintf(name, BUS_ID_SIZE, "%s.%d", node->name, magic - 1);
+ dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1);
}
EXPORT_SYMBOL(of_device_make_bus_id);
dev->dev.archdata.of_node = np;
if (bus_id)
- strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
+ dev_set_name(&dev->dev, bus_id);
else
of_device_make_bus_id(dev);
void show_regs(struct pt_regs *regs)
{
- printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->kernel_mode);
+ printk(KERN_INFO " Registers dump: mode=%X\r\n", regs->pt_mode);
printk(KERN_INFO " r1=%08lX, r2=%08lX, r3=%08lX, r4=%08lX\n",
regs->r1, regs->r2, regs->r3, regs->r4);
printk(KERN_INFO " r5=%08lX, r6=%08lX, r7=%08lX, r8=%08lX\n",
regs->r29, regs->r30, regs->r31, regs->pc);
printk(KERN_INFO " msr=%08lX, ear=%08lX, esr=%08lX, fsr=%08lX\n",
regs->msr, regs->ear, regs->esr, regs->fsr);
- while (1)
- ;
}
void (*pm_idle)(void);
{
}
-/* FIXME - here will be a proposed change -> remove nr parameter */
-int copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
+int copy_thread(unsigned long clone_flags, unsigned long usp,
unsigned long unused,
struct task_struct *p, struct pt_regs *regs)
{
int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
{
struct pt_regs regs;
- int ret;
memset(®s, 0, sizeof(regs));
/* store them in non-volatile registers */
regs.r6 = (unsigned long)arg;
local_save_flags(regs.msr);
regs.pc = (unsigned long)kernel_thread_helper;
- regs.kernel_mode = 1;
+ regs.pt_mode = 1;
- ret = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
+ return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
®s, 0, NULL, NULL);
-
- return ret;
}
unsigned long get_wchan(struct task_struct *p)
/* TBD (used by procfs) */
return 0;
}
+
+/* Set up a thread for executing a new program */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
+{
+ set_fs(USER_DS);
+ regs->pc = pc;
+ regs->r1 = usp;
+ regs->pt_mode = 0;
+}
#include <asm/system.h>
#include <asm/mmu.h>
#include <asm/pgtable.h>
-#include <linux/pci.h>
#include <asm/sections.h>
#include <asm/pci-bridge.h>
#include <linux/signal.h>
#include <linux/errno.h>
-#include <linux/ptrace.h>
#include <asm/processor.h>
#include <linux/uaccess.h>
#include <asm/asm-offsets.h>
#include <linux/uaccess.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
-#include <linux/signal.h>
#include <linux/syscalls.h>
#include <asm/cacheflush.h>
#include <asm/syscalls.h>
asmlinkage int sys_sigreturn(struct pt_regs *regs)
{
- struct sigframe *frame = (struct sigframe *)regs->r1;
+ struct sigframe *frame =
+ (struct sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
sigset_t set;
int rval;
asmlinkage int sys_rt_sigreturn(struct pt_regs *regs)
{
- struct rt_sigframe *frame = (struct rt_sigframe *)regs->r1;
+ struct rt_sigframe *frame =
+ (struct rt_sigframe *)(regs->r1 + STATE_SAVE_ARG_SPACE);
+
sigset_t set;
stack_t st;
int rval;
goto give_sigsegv;
/* Set up registers for signal handler */
- regs->r1 = (unsigned long) frame;
+ regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
/* Signal handler args: */
regs->r5 = signal; /* Arg 0: signum */
regs->r6 = (unsigned long) &frame->sc; /* arg 1: sigcontext */
goto give_sigsegv;
/* Set up registers for signal handler */
- regs->r1 = (unsigned long) frame;
+ regs->r1 = (unsigned long) frame - STATE_SAVE_ARG_SPACE;
+
/* Signal handler args: */
regs->r5 = signal; /* arg 0: signum */
regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */
#include <linux/module.h>
#include <linux/err.h>
#include <linux/fs.h>
-#include <linux/ipc.h>
#include <linux/semaphore.h>
-#include <linux/syscalls.h>
#include <linux/uaccess.h>
#include <linux/unistd.h>
ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
break;
}
- return -EINVAL;
+ return ret;
}
asmlinkage int sys_vfork(struct pt_regs *regs)
.long sys_sendmsg /* 360 */
.long sys_recvmsg
.long sys_ni_syscall
+ .long sys_ni_syscall
+ .long sys_ni_syscall
clockevents_register_device(&clockevent_microblaze_timer);
}
-static cycle_t microblaze_read(void)
+static cycle_t microblaze_read(struct clocksource *cs)
{
/* reading actual value of timer 1 */
return (cycle_t) (in_be32(TIMER_BASE + TCR1));
static int __init kstack_setup(char *s)
{
- kstack_depth_to_print = strict_strtoul(s, 0, 0);
+ kstack_depth_to_print = strict_strtoul(s, 0, NULL);
return 1;
}
config PAGE_SIZE_8KB
bool "8kB"
- depends on EXPERIMENTAL && CPU_R8000
+ depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
help
Using 8kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available
- only on the R8000 processor. Not that at the time of this writing
- this option is still high experimental; there are also issues with
- compatibility of user applications.
+ only on R8000 and cnMIPS processors. Note that you will need a
+ suitable Linux distribution to support this.
config PAGE_SIZE_16KB
bool "16kB"
all non-R3000 family processors. Note that you will need a suitable
Linux distribution to support this.
+config PAGE_SIZE_32KB
+ bool "32kB"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ Using 32kB page size will result in higher performance kernel at
+ the price of higher memory consumption. This option is available
+ only on cnMIPS cores. Note that you will need a suitable Linux
+ distribution to support this.
+
config PAGE_SIZE_64KB
bool "64kB"
depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
endmenu
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
config LOCKDEP_SUPPORT
bool
default y
KBUILD_DEFCONFIG := ip22_defconfig
-cflags-y := -ffunction-sections
-
#
# Select the object file format to substitute into the linker script.
#
endif
endif
+cflags-y := -ffunction-sections
+cflags-y += $(call cc-option, -mno-check-zero-division)
+
ifdef CONFIG_32BIT
ld-emul = $(32bit-emul)
vmlinux-32 = vmlinux
extern int allow_au1k_wait; /* default off for CP0 Counter */
-static cycle_t au1x_counter1_read(void)
+static cycle_t au1x_counter1_read(struct clocksource *cs)
{
return au_readl(SYS_RTCREAD);
}
local_irq_restore(flags);
}
-static cycle_t octeon_cvmcount_read(void)
+static cycle_t octeon_cvmcount_read(struct clocksource *cs)
{
return read_c0_cvmcount();
}
int num;
if (BITS_PER_LONG == 32 &&
- __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+ __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
__asm__(
" .set push \n"
" .set mips32 \n"
{
int r;
- if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+ if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
__asm__("clz %0, %1" : "=r" (x) : "r" (x));
return 32 - x;
__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
__wsum sum, int *err_ptr)
{
- might_sleep();
+ might_fault();
return __csum_partial_copy_user((__force void *)src, dst,
len, sum, err_ptr);
}
__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
__wsum sum, int *err_ptr)
{
- might_sleep();
+ might_fault();
if (access_ok(VERIFY_WRITE, dst, len))
return __csum_partial_copy_user(src, (__force void *)dst,
len, sum, err_ptr);
/*
* Architecture specific compatibility types
*/
-#include <linux/seccomp.h>
#include <linux/thread_info.h>
#include <linux/types.h>
#include <asm/page.h>
#define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \
cpu_has_mips64r1 | cpu_has_mips64r2)
+/*
+ * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ. For 64-bit kernels
+ * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
+ */
+# ifndef cpu_has_clo_clz
+# define cpu_has_clo_clz cpu_has_mips_r
+# endif
+
#ifndef cpu_has_dsp
#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
#endif
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-#ifndef _ASM_DIV64_H
-#define _ASM_DIV64_H
+#ifndef __ASM_DIV64_H
+#define __ASM_DIV64_H
-#include <linux/types.h>
+#include <asm-generic/div64.h>
-#if (_MIPS_SZLONG == 32)
+#if BITS_PER_LONG == 64
-#include <asm/compiler.h>
+#include <linux/types.h>
/*
* No traps on overflows for any of these...
*/
-#define do_div64_32(res, high, low, base) ({ \
- unsigned long __quot32, __mod32; \
- unsigned long __cf, __tmp, __tmp2, __i; \
- \
- __asm__(".set push\n\t" \
- ".set noat\n\t" \
- ".set noreorder\n\t" \
- "move %2, $0\n\t" \
- "move %3, $0\n\t" \
- "b 1f\n\t" \
- " li %4, 0x21\n" \
- "0:\n\t" \
- "sll $1, %0, 0x1\n\t" \
- "srl %3, %0, 0x1f\n\t" \
- "or %0, $1, %5\n\t" \
- "sll %1, %1, 0x1\n\t" \
- "sll %2, %2, 0x1\n" \
- "1:\n\t" \
- "bnez %3, 2f\n\t" \
- " sltu %5, %0, %z6\n\t" \
- "bnez %5, 3f\n" \
- "2:\n\t" \
- " addiu %4, %4, -1\n\t" \
- "subu %0, %0, %z6\n\t" \
- "addiu %2, %2, 1\n" \
- "3:\n\t" \
- "bnez %4, 0b\n\t" \
- " srl %5, %1, 0x1f\n\t" \
- ".set pop" \
- : "=&r" (__mod32), "=&r" (__tmp), \
- "=&r" (__quot32), "=&r" (__cf), \
- "=&r" (__i), "=&r" (__tmp2) \
- : "Jr" (base), "0" (high), "1" (low)); \
- \
- (res) = __quot32; \
- __mod32; })
-
-#define do_div(n, base) ({ \
- unsigned long long __quot; \
- unsigned long __mod; \
- unsigned long long __div; \
- unsigned long __upper, __low, __high, __base; \
- \
- __div = (n); \
- __base = (base); \
- \
- __high = __div >> 32; \
- __low = __div; \
- __upper = __high; \
- \
- if (__high) \
- __asm__("divu $0, %z2, %z3" \
- : "=h" (__upper), "=l" (__high) \
- : "Jr" (__high), "Jr" (__base) \
- : GCC_REG_ACCUM); \
- \
- __mod = do_div64_32(__low, __upper, __low, __base); \
- \
- __quot = __high; \
- __quot = __quot << 32 | __low; \
- (n) = __quot; \
- __mod; })
-
-#endif /* (_MIPS_SZLONG == 32) */
-
-#if (_MIPS_SZLONG == 64)
-
-/*
- * Hey, we're already 64-bit, no
- * need to play games..
- */
-#define do_div(n, base) ({ \
- unsigned long __quot; \
- unsigned int __mod; \
- unsigned long __div; \
- unsigned int __base; \
- \
- __div = (n); \
- __base = (base); \
- \
- __mod = __div % __base; \
- __quot = __div / __base; \
- \
- (n) = __quot; \
- __mod; })
+#define __div64_32(n, base) \
+({ \
+ unsigned long __cf, __tmp, __tmp2, __i; \
+ unsigned long __quot32, __mod32; \
+ unsigned long __high, __low; \
+ unsigned long long __n; \
+ \
+ __high = *__n >> 32; \
+ __low = __n; \
+ __asm__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set noreorder \n" \
+ " move %2, $0 \n" \
+ " move %3, $0 \n" \
+ " b 1f \n" \
+ " li %4, 0x21 \n" \
+ "0: \n" \
+ " sll $1, %0, 0x1 \n" \
+ " srl %3, %0, 0x1f \n" \
+ " or %0, $1, %5 \n" \
+ " sll %1, %1, 0x1 \n" \
+ " sll %2, %2, 0x1 \n" \
+ "1: \n" \
+ " bnez %3, 2f \n" \
+ " sltu %5, %0, %z6 \n" \
+ " bnez %5, 3f \n" \
+ "2: \n" \
+ " addiu %4, %4, -1 \n" \
+ " subu %0, %0, %z6 \n" \
+ " addiu %2, %2, 1 \n" \
+ "3: \n" \
+ " bnez %4, 0b\n\t" \
+ " srl %5, %1, 0x1f\n\t" \
+ " .set pop" \
+ : "=&r" (__mod32), "=&r" (__tmp), \
+ "=&r" (__quot32), "=&r" (__cf), \
+ "=&r" (__i), "=&r" (__tmp2) \
+ : "Jr" (base), "0" (__high), "1" (__low)); \
+ \
+ (__n) = __quot32; \
+ __mod32; \
+})
-#endif /* (_MIPS_SZLONG == 64) */
+#endif /* BITS_PER_LONG == 64 */
-#endif /* _ASM_DIV64_H */
+#endif /* __ASM_DIV64_H */
enum dma_data_direction direction);
extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size, enum dma_data_direction direction);
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+ size_t size, enum dma_data_direction direction)
+{
+ dma_unmap_single(dev, dma_address, size, direction);
+}
+
extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
int nhwentries, enum dma_data_direction direction);
extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
return __virt_to_fix(vaddr);
}
+#define kmap_get_fixmap_pte(vaddr) \
+ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
/*
* Called from pgtable_init()
*/
__instruction_hazard(); \
} while (0)
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
- defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+ defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
+ defined(CONFIG_CPU_R5500)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
/* declarations for highmem.c */
extern unsigned long highstart_pfn, highend_pfn;
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
extern pte_t *pkmap_page_table;
/*
#define flush_cache_kmaps() flush_cache_all()
+extern void kmap_init(void);
+
+#define kmap_prot PAGE_KERNEL
+
#endif /* __KERNEL__ */
#endif /* _ASM_HIGHMEM_H */
#ifdef CONFIG_SOC_AU1100
enum soc_au1100_ints {
AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
- AU1100_UART0_INT,
+ AU1100_UART0_INT = AU1100_FIRST_INT,
AU1100_UART1_INT,
AU1100_SD_INT,
AU1100_UART3_INT,
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
-
- AU1200_NAND_INT = AU1200_FIRST_INT + 23,
+ AU1200_GPIO_203,
+ AU1200_NAND_INT,
AU1200_GPIO_204,
AU1200_GPIO_205,
AU1200_GPIO_206,
#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
#endif
-#ifdef CONFIG_PM
-/*
- * This will enable the device to be powered up when write() or read()
- * is called. If this is not defined, the driver will return -EBUSY.
- */
-#define WAKE_ON_ACCESS 1
-
-typedef struct {
- spinlock_t lock; /* Used to block on state transitions */
- au1xxx_power_dev_t *dev; /* Power Managers device structure */
- unsigned stopped; /* Used to signal device is stopped */
-} pm_state;
-#endif
-
typedef struct {
u32 tx_dev_id, rx_dev_id, target_dev_id;
u32 tx_chan, rx_chan;
#endif
int irq;
u32 regbase;
-#ifdef CONFIG_PM
- pm_state pm;
-#endif
} _auide_hwif;
/******************************************************************************/
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * arch/mips/kernel/proc.c(show_cpuinfo),
+ * loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 32
+
+
+#define cpu_has_32fpr 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_4kex 1
+#define cpu_has_64bits 1
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_counter 1
+#define cpu_has_dc_aliases 1
+#define cpu_has_divec 0
+#define cpu_has_dsp 0
+#define cpu_has_ejtag 0
+#define cpu_has_fpu 1
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_inclusive_pcaches 1
+#define cpu_has_llsc 1
+#define cpu_has_mcheck 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips16 0
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips3d 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+#define cpu_has_mipsmt 0
+#define cpu_has_prefetch 0
+#define cpu_has_smartmips 0
+#define cpu_has_tlb 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_userlocal 0
+#define cpu_has_vce 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_watch 1
+#define cpu_icache_snoops_remote_store 1
+
+#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
#else
#define PM_4K 0x00000000
+#define PM_8K 0x00002000
#define PM_16K 0x00006000
+#define PM_32K 0x0000e000
#define PM_64K 0x0001e000
+#define PM_128K 0x0003e000
#define PM_256K 0x0007e000
+#define PM_512K 0x000fe000
#define PM_1M 0x001fe000
+#define PM_2M 0x003fe000
#define PM_4M 0x007fe000
+#define PM_8M 0x00ffe000
#define PM_16M 0x01ffe000
+#define PM_32M 0x03ffe000
#define PM_64M 0x07ffe000
#define PM_256M 0x1fffe000
#define PM_1G 0x7fffe000
*/
#ifdef CONFIG_PAGE_SIZE_4KB
#define PM_DEFAULT_MASK PM_4K
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define PM_DEFAULT_MASK PM_8K
#elif defined(CONFIG_PAGE_SIZE_16KB)
#define PM_DEFAULT_MASK PM_16K
+#elif defined(CONFIG_PAGE_SIZE_32KB)
+#define PM_DEFAULT_MASK PM_32K
#elif defined(CONFIG_PAGE_SIZE_64KB)
#define PM_DEFAULT_MASK PM_64K
#else
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
- "dsrl\t%M0, %M0, 32\n\t" \
- "dsrl\t%L0, %L0, 32\n\t" \
+ "dsra\t%M0, %M0, 32\n\t" \
+ "dsra\t%L0, %L0, 32\n\t" \
".set\tmips0" \
: "=r" (__val)); \
else \
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source ", " #sel "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
- "dsrl\t%M0, %M0, 32\n\t" \
- "dsrl\t%L0, %L0, 32\n\t" \
+ "dsra\t%M0, %M0, 32\n\t" \
+ "dsra\t%L0, %L0, 32\n\t" \
".set\tmips0" \
: "=r" (__val)); \
local_irq_restore(__flags); \
set_c0_##name(unsigned int set) \
{ \
unsigned int res; \
+ unsigned int new; \
unsigned int omt; \
unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
res = read_c0_##name(); \
- res |= set; \
- write_c0_##name(res); \
+ new = res | set; \
+ write_c0_##name(new); \
__emt(omt); \
local_irq_restore(flags); \
\
clear_c0_##name(unsigned int clear) \
{ \
unsigned int res; \
+ unsigned int new; \
unsigned int omt; \
unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
res = read_c0_##name(); \
- res &= ~clear; \
- write_c0_##name(res); \
+ new = res & ~clear; \
+ write_c0_##name(new); \
__emt(omt); \
local_irq_restore(flags); \
\
} \
\
static inline unsigned int \
-change_c0_##name(unsigned int change, unsigned int new) \
+change_c0_##name(unsigned int change, unsigned int newbits) \
{ \
unsigned int res; \
+ unsigned int new; \
unsigned int omt; \
unsigned long flags; \
\
\
omt = __dmt(); \
res = read_c0_##name(); \
- res &= ~change; \
- res |= (new & change); \
- write_c0_##name(res); \
+ new = res & ~change; \
+ new |= (newbits & change); \
+ write_c0_##name(new); \
__emt(omt); \
local_irq_restore(flags); \
\
#ifdef CONFIG_PAGE_SIZE_16KB
#define PAGE_SHIFT 14
#endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PAGE_SHIFT 15
+#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PAGE_SHIFT 16
#endif
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 0
+#define PTE_ORDER 0
+#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PGD_ORDER 0
#define PUD_ORDER aieeee_attempt_to_allocate_pud
TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
#define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size
-#define NMI_OFFSET(nasid, slice) \
+#define SN_NMI_OFFSET(nasid, slice) \
(KLD_NMI(nasid)->offset + \
KLD_NMI(nasid)->stride * (slice))
#define NMI_ADDR(nasid, slice) \
- TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+ TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
#define NMI_SIZE(nasid) KLD_NMI(nasid)->size
#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
+ * Derived from IRIX <sys/SN/nmi.h>, Revision 1.5.
+ *
* Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
*/
#ifndef __ASM_SN_NMI_H
#define __ASM_SN_NMI_H
-#ident "$Revision: 1.5 $"
-
#include <asm/sn/addrs.h>
/*
#ifdef CONFIG_PAGE_SIZE_16KB
#define THREAD_SIZE_ORDER (0)
#endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define THREAD_SIZE_ORDER (0)
+#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define THREAD_SIZE_ORDER (0)
#endif
static inline int mips_clockevent_init(void)
{
-#ifdef CONFIG_CEVT_R4K
+#ifdef CONFIG_MIPS_MT_SMTC
+ extern int smtc_clockevent_init(void);
+
+ return smtc_clockevent_init();
+#elif defined(CONFIG_CEVT_R4K)
return r4k_clockevent_init();
#else
return -ENXIO;
#define __access_mask get_fs().seg
#define __access_ok(addr, size, mask) \
- (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+({ \
+ unsigned long __addr = (unsigned long) (addr); \
+ unsigned long __size = size; \
+ unsigned long __mask = mask; \
+ unsigned long __ok; \
+ \
+ __chk_user_ptr(addr); \
+ __ok = (signed long)(__mask & (__addr | (__addr + __size) | \
+ __ua_size(__size))); \
+ __ok == 0; \
+})
#define access_ok(type, addr, size) \
- likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+ likely(__access_ok((addr), (size), __access_mask))
/*
* put_user: - Write a simple value into user space.
({ \
int __gu_err; \
\
+ __chk_user_ptr(ptr); \
__get_user_common((x), size, ptr); \
__gu_err; \
})
int __gu_err = -EFAULT; \
const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \
\
+ might_fault(); \
if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \
__get_user_common((x), size, __gu_ptr); \
\
__typeof__(*(ptr)) __pu_val; \
int __pu_err = 0; \
\
+ __chk_user_ptr(ptr); \
__pu_val = (x); \
switch (size) { \
case 1: __put_user_asm("sb", ptr); break; \
__typeof__(*(ptr)) __pu_val = (x); \
int __pu_err = -EFAULT; \
\
+ might_fault(); \
if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \
switch (size) { \
case 1: __put_user_asm("sb", __pu_addr); break; \
const void *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ might_fault(); \
__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \
__cu_len; \
})
const void *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \
+ if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) { \
+ might_fault(); \
__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \
__cu_len); \
+ } \
__cu_len; \
})
const void __user *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ might_fault(); \
__cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
__cu_len); \
__cu_len; \
const void __user *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \
+ if (access_ok(VERIFY_READ, __cu_from, __cu_len)) { \
+ might_fault(); \
__cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
__cu_len); \
+ } \
__cu_len; \
})
-#define __copy_in_user(to, from, n) __copy_from_user(to, from, n)
+#define __copy_in_user(to, from, n) \
+({ \
+ void __user *__cu_to; \
+ const void __user *__cu_from; \
+ long __cu_len; \
+ \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ might_fault(); \
+ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
+ __cu_len); \
+ __cu_len; \
+})
#define copy_in_user(to, from, n) \
({ \
const void __user *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \
- access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \
+ access_ok(VERIFY_WRITE, __cu_to, __cu_len))) { \
+ might_fault(); \
__cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
__cu_len); \
+ } \
__cu_len; \
})
{
__kernel_size_t res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, $0\n\t"
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
__MODULE_JAL(__strlen_user_nocheck_asm)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
__MODULE_JAL(__strlen_user_asm)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
}
-int __cpuinit mips_clockevent_init(void)
+int __cpuinit smtc_clockevent_init(void)
{
uint64_t mips_freq = mips_hpt_frequency;
unsigned int cpu = smp_processor_id();
static struct txx9_tmr_reg __iomem *txx9_cs_tmrptr;
-static cycle_t txx9_cs_read(void)
+static cycle_t txx9_cs_read(struct clocksource *cs)
{
return __raw_readl(&txx9_cs_tmrptr->trr);
}
#include <asm/sibyte/sb1250.h>
-static cycle_t bcm1480_hpt_read(void)
+static cycle_t bcm1480_hpt_read(struct clocksource *cs)
{
return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
}
#include <asm/dec/ioasic.h>
#include <asm/dec/ioasic_addrs.h>
-static cycle_t dec_ioasic_hpt_read(void)
+static cycle_t dec_ioasic_hpt_read(struct clocksource *cs)
{
return ioasic_read(IO_REG_FCTR);
}
while (!ds1287_timer_state())
;
- start = dec_ioasic_hpt_read();
+ start = dec_ioasic_hpt_read(&clocksource_dec);
while (i--)
while (!ds1287_timer_state())
;
- end = dec_ioasic_hpt_read();
+ end = dec_ioasic_hpt_read(&clocksource_dec);
freq = (end - start) * 10;
printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
#include <asm/time.h>
-static cycle_t c0_hpt_read(void)
+static cycle_t c0_hpt_read(struct clocksource *cs)
{
return read_c0_count();
}
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
* again.
*/
-static cycle_t sb1250_hpt_read(void)
+static cycle_t sb1250_hpt_read(struct clocksource *cs)
{
unsigned int count;
* to just read by itself. So use jiffies to emulate a free
* running counter:
*/
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
{
unsigned long flags;
int count;
PTR sys_eventfd
PTR sys_fallocate
PTR sys_timerfd_create
- PTR sys_timerfd_gettime /* 5285 */
- PTR sys_timerfd_settime
+ PTR compat_sys_timerfd_gettime /* 5285 */
+ PTR compat_sys_timerfd_settime
PTR sys_signalfd4
PTR sys_eventfd2
PTR sys_epoll_create1
PTR sys_eventfd
PTR sys32_fallocate /* 4320 */
PTR sys_timerfd_create
- PTR sys_timerfd_gettime
- PTR sys_timerfd_settime
+ PTR compat_sys_timerfd_gettime
+ PTR compat_sys_timerfd_settime
PTR compat_sys_signalfd4
PTR sys_eventfd2 /* 4325 */
PTR sys_epoll_create1
return;
die_if_kernel("Unhandled kernel unaligned access", regs);
- send_sig(SIGSEGV, current, 1);
+ force_sig(SIGSEGV, current);
return;
sigbus:
die_if_kernel("Unhandled kernel unaligned access", regs);
- send_sig(SIGBUS, current, 1);
+ force_sig(SIGBUS, current);
return;
sigill:
die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs);
- send_sig(SIGILL, current, 1);
+ force_sig(SIGILL, current);
}
asmlinkage void do_ade(struct pt_regs *regs)
case PM_16K: return "16kb";
case PM_64K: return "64kb";
case PM_256K: return "256kb";
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+ case PM_8K: return "8kb";
+ case PM_32K: return "32kb";
+ case PM_128K: return "128kb";
+ case PM_512K: return "512kb";
+ case PM_2M: return "2Mb";
+ case PM_8M: return "8Mb";
+ case PM_32M: return "32Mb";
+#endif
#ifndef CONFIG_CPU_VR41XX
case PM_1M: return "1Mb";
case PM_4M: return "4Mb";
printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
icache_size >> 10,
- cpu_has_vtag_icache ? "VIVT" : "VIPT",
+ c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT",
way_string[c->icache.ways], c->icache.linesz);
printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n",
unsigned long addr;
addr = (unsigned long) page_address(page) + offset;
- dma_cache_wback_inv(addr, size);
+ __dma_sync(addr, size, direction);
}
return plat_map_dma_mem_page(dev, page) + offset;
EXPORT_SYMBOL(dma_map_page);
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-
- if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) {
- unsigned long addr;
-
- addr = dma_addr_to_virt(dma_address);
- dma_cache_wback_inv(addr, size);
- }
-
- plat_unmap_dma_mem(dev, dma_address);
-}
-
-EXPORT_SYMBOL(dma_unmap_page);
-
void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
enum dma_data_direction direction)
{
#include <linux/module.h>
#include <linux/highmem.h>
+#include <asm/fixmap.h>
#include <asm/tlbflush.h>
+static pte_t *kmap_pte;
+
+unsigned long highstart_pfn, highend_pfn;
+
void *__kmap(struct page *page)
{
void *addr;
return addr;
}
+EXPORT_SYMBOL(__kmap);
void __kunmap(struct page *page)
{
return;
kunmap_high(page);
}
+EXPORT_SYMBOL(__kunmap);
/*
* kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
#ifdef CONFIG_DEBUG_HIGHMEM
BUG_ON(!pte_none(*(kmap_pte - idx)));
#endif
- set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+ set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL));
local_flush_tlb_one((unsigned long)vaddr);
return (void*) vaddr;
}
+EXPORT_SYMBOL(__kmap_atomic);
void __kunmap_atomic(void *kvaddr, enum km_type type)
{
pagefault_enable();
}
+EXPORT_SYMBOL(__kunmap_atomic);
/*
* This is the same as kmap_atomic() but can map memory that doesn't
debug_kmap_atomic(type);
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+ set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL));
flush_tlb_one(vaddr);
return (void*) vaddr;
return pte_page(*pte);
}
-EXPORT_SYMBOL(__kmap);
-EXPORT_SYMBOL(__kunmap);
-EXPORT_SYMBOL(__kmap_atomic);
-EXPORT_SYMBOL(__kunmap_atomic);
+void __init kmap_init(void)
+{
+ unsigned long kmap_vstart;
+
+ /* cache the first kmap pte */
+ kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
+ kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+}
return 1UL << order;
}
-/*
- * These are almost like kmap_atomic / kunmap_atmic except they take an
- * additional address argument as the hint.
- */
-
-#define kmap_get_fixmap_pte(vaddr) \
- pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
#ifdef CONFIG_MIPS_MT_SMTC
static pte_t *kmap_coherent_pte;
static void __init kmap_coherent_init(void)
}
}
-#ifdef CONFIG_HIGHMEM
-unsigned long highstart_pfn, highend_pfn;
-
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-static void __init kmap_init(void)
-{
- unsigned long kmap_vstart;
-
- /* cache the first kmap pte */
- kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
- kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
-
- kmap_prot = PAGE_KERNEL;
-}
-#endif /* CONFIG_HIGHMEM */
-
void __init fixrange_init(unsigned long start, unsigned long end,
pgd_t *pgd_base)
{
#include <asm/r4kcache.h>
-int rm7k_tcache_enabled;
+static int rm7k_tcache_enabled;
/*
* Writeback and invalidate the primary cache dcache before DMA.
clear_c0_config(RM7K_CONF_SE);
}
-struct bcache_ops rm7k_sc_ops = {
+static struct bcache_ops rm7k_sc_ops = {
.bc_enable = rm7k_sc_enable,
.bc_disable = rm7k_sc_disable,
.bc_wback_inv = rm7k_sc_wback_inv,
static unsigned long cpj;
-static cycle_t hpt_read(void)
+static cycle_t hpt_read(struct clocksource *cs)
{
return read_c0_count2();
}
endchoice
-menu "Options for PMC-Sierra MSP chipsets"
- depends on PMC_MSP
-
-config PMC_MSP_EMBEDDED_ROOTFS
- bool "Root filesystem embedded in kernel image"
- select MTD
- select MTD_BLOCK
- select MTD_PMC_MSP_RAMROOT
- select MTD_RAM
-
-endmenu
-
config HYPERTRANSPORT
bool "Hypertransport Support for PMC-Sierra Yosemite"
depends on PMC_YOSEMITE
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
-#ifdef CONFIG_CRAMFS
-#include <linux/cramfs_fs.h>
-#endif
-#ifdef CONFIG_SQUASHFS
-#include <linux/squashfs_fs.h>
-#endif
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
char *str;
unsigned int memsize;
unsigned int heaptop;
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
- void *ramroot_start;
- unsigned long ramroot_size;
-#endif
int i;
str = prom_getenv(memsz_env);
i++; /* 3 */
mdesc[i].type = BOOT_MEM_RESERVED;
mdesc[i].base = CPHYSADDR((u32)_text);
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
- if (get_ramroot(&ramroot_start, &ramroot_size)) {
- /*
- * Rootfs in RAM -- follows kernel
- * Combine rootfs image with kernel block so a
- * page (4k) isn't wasted between memory blocks
- */
- mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
- (u32)ramroot_start + ramroot_size)) - mdesc[i].base;
- } else
-#endif
- mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
- (u32)_end)) - mdesc[i].base;
+ mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
/* Remainder of RAM -- under memsize */
i++; /* 5 */
return &mdesc[0];
}
-
-/* rootfs functions */
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-bool get_ramroot(void **start, unsigned long *size)
-{
- extern char _end[];
-
- /* Check for start following the end of the kernel */
- void *check_start = (void *)_end;
-
- /* Check for supported rootfs types */
-#ifdef CONFIG_CRAMFS
- if (*(__u32 *)check_start == CRAMFS_MAGIC) {
- /* Get CRAMFS size */
- *start = check_start;
- *size = PAGE_ALIGN(((struct cramfs_super *)
- check_start)->size);
-
- return true;
- }
-#endif
-#ifdef CONFIG_SQUASHFS
- if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) {
- /* Get SQUASHFS size */
- *start = check_start;
- *size = PAGE_ALIGN(((struct squashfs_super_block *)
- check_start)->bytes_used);
-
- return true;
- }
-#endif
-
- return false;
-}
-EXPORT_SYMBOL(get_ramroot);
-#endif
#if defined(CONFIG_PMC_MSP7120_GW)
#include <msp_regops.h>
-#include <msp_gpio.h>
#define MSP_BOARD_RESET_GPIO 9
#endif
* as GPIO char driver may not be enabled and it would look up
* data inRAM!
*/
- set_value_reg32(GPIO_CFG3_REG,
- basic_mode_mask(MSP_BOARD_RESET_GPIO),
- basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO));
- set_reg32(GPIO_DATA3_REG,
- basic_data_mask(MSP_BOARD_RESET_GPIO));
+ set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
+ set_reg32(GPIO_DATA3_REG, 8);
/*
* In case GPIO9 doesn't reset the board (jumper configurable!)
mips_hpt_frequency = cpu_rate/2;
}
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
{
-#ifdef CONFIG_IRQ_MSP_CIC
- /* we are using the vpe0 counter for timer interrupts */
- setup_irq(MSP_INT_VPE0_TIMER, irq);
-#endif
+ return MSP_INT_VPE0_TIMER;
}
setup_irq(irq, &hub_rt_irqaction);
}
-static cycle_t hub_rt_read(void)
+static cycle_t hub_rt_read(struct clocksource *cs)
{
return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT);
}
#include <asm/ptrace.h>
#include <asm/tlbdebug.h>
-int ip32_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
{
int data = regs->cp0_cause & 4;
extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
-struct irqaction memerr_irq = {
+static struct irqaction memerr_irq = {
.handler = crime_memerr_intr,
.flags = IRQF_DISABLED,
.name = "CRIME memory error",
};
-struct irqaction cpuerr_irq = {
+static struct irqaction cpuerr_irq = {
.handler = crime_cpuerr_intr,
.flags = IRQF_DISABLED,
.name = "CRIME CPU error",
{
int i = 0, old_cpu, cpu, int_on, k;
u64 cur_ints;
- struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
unsigned int irq_dirty;
cpu = cpu_logical_map(i);
/* Protect against other affinity changers and IMR manipulation */
- spin_lock_irqsave(&desc->lock, flags);
- spin_lock(&bcm1480_imr_lock);
+ spin_lock_irqsave(&bcm1480_imr_lock, flags);
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = bcm1480_irq_owner[irq];
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
}
}
- spin_unlock(&bcm1480_imr_lock);
- spin_unlock_irqrestore(&desc->lock, flags);
+ spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
}
#endif
{
int i = 0, old_cpu, cpu, int_on;
u64 cur_ints;
- struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
i = cpumask_first(mask);
cpu = cpu_logical_map(i);
/* Protect against other affinity changers and IMR manipulation */
- spin_lock_irqsave(&desc->lock, flags);
- spin_lock(&sb1250_imr_lock);
+ spin_lock_irqsave(&sb1250_imr_lock, flags);
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = sb1250_irq_owner[irq];
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
R_IMR_INTERRUPT_MASK));
}
- spin_unlock(&sb1250_imr_lock);
- spin_unlock_irqrestore(&desc->lock, flags);
+ spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}
#endif
{
int i;
__u32 divmode;
- int cpuclk = 0;
+ unsigned int cpuclk = 0;
u64 ccfg;
txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
{
int i;
__u32 divmode;
- int cpuclk = 0;
+ unsigned int cpuclk = 0;
u64 ccfg;
txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
int i;
__u32 divmode;
__u64 pcfg;
- int cpuclk = 0;
+ unsigned int cpuclk = 0;
txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE,
TX4939_REG_SIZE);
}
struct txx9_board_vec rbtx4939_vec __initdata = {
- .system = "Tothiba RBTX4939",
+ .system = "Toshiba RBTX4939",
.prom_init = rbtx4939_prom_init,
.mem_setup = rbtx4939_setup,
.irq_setup = rbtx4939_irq_setup,
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc2
-# Tue Feb 19 18:52:24 2008
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 11:13:22 2009
#
CONFIG_MN10300=y
CONFIG_AM33=y
CONFIG_GENERIC_BUG=y
CONFIG_QUICKLIST=y
CONFIG_ARCH_HAS_ILOG2_U32=y
-# CONFIG_ARCH_SUPPORTS_AOUT is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HOTPLUG_CPU is not set
CONFIG_HZ=1000
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_SYSFS_DEPRECATED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
-CONFIG_OPROFILE=y
-# CONFIG_HAVE_OPROFILE is not set
-# CONFIG_HAVE_KPROBES is not set
-# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
-CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
+# CONFIG_FREEZER is not set
#
# Matsushita MN10300 system setup
CONFIG_KERNEL_TEXT_ADDRESS=0x90001000
CONFIG_KERNEL_ZIMAGE_BASE_ADDRESS=0x90700000
CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
CONFIG_MN10300_CURRENT_IN_E2=y
CONFIG_MN10300_USING_JTAG=y
CONFIG_MN10300_RTC=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# Power management options
# Executable formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
-
-#
-# Networking
-#
CONFIG_NET=y
#
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x8000000
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_PLATRAM is not set
#
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HAVE_IDE is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
#
# SCSI device support
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
CONFIG_SMC91X=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# Character devices
#
# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+# CONFIG_PROC_PAGE_MONITOR is not set
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_ROMFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_SAMPLES is not set
#
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
-
-#
-# Profiling support
-#
+CONFIG_NLATTR=y
#ifndef _ASM_BUG_H
#define _ASM_BUG_H
+#ifdef CONFIG_BUG
+
/*
* Tell the user there is some problem.
*/
-#define _debug_bug_trap() \
+#define BUG() \
do { \
asm volatile( \
" syscall 15 \n" \
: \
: "i"(__FILE__), "i"(__LINE__) \
); \
-} while (0)
-
-#define BUG() _debug_bug_trap()
+} while (1)
#define HAVE_ARCH_BUG
+#endif /* CONFIG_BUG */
+
#include <asm-generic/bug.h>
#endif /* _ASM_BUG_H */
#define __NR_dup3 331
#define __NR_pipe2 332
#define __NR_inotify_init1 333
+#define __NR_preadv 334
+#define __NR_pwritev 335
#ifdef __KERNEL__
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev /* 335 */
nr_syscalls=(.-sys_call_table)/4
* 2 of the Licence, or (at your option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <linux/linkage.h>
#include <linux/serial_reg.h>
#include <asm/param.h>
#include <unit/serial.h>
- .section .text.head,"ax"
+ __HEAD
###############################################################################
#
data_resource.start = virt_to_bus(&_etext);
data_resource.end = virt_to_bus(&_edata)-1;
-#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT)
-#define PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-#define PFN_PHYS(x) ((x) << PAGE_SHIFT)
-
start_pfn = (CONFIG_KERNEL_RAM_BASE_ADDRESS >> PAGE_SHIFT);
kstart_pfn = PFN_UP(__pa(&_text));
free_pfn = PFN_UP(__pa(&_end));
_stext = .;
_text = .; /* Text and read-only data */
.text : {
- *(
- .text.head
- .text
- )
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
default y if PMAC_APM_EMU
bool
+config DTC
+ bool
+ default y
+
config DEFAULT_UIMAGE
bool
help
config PPC_256K_PAGES
bool "256k page size" if 44x
- depends on !STDBINUTILS && (!SHMEM || BROKEN)
+ depends on !STDBINUTILS
help
Make the page size 256k.
#define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
-void ibm4xx_denali_fixup_memsize(void)
+/*
+ * Some U-Boot versions set the number of chipselects to two
+ * for Sequoia/Rainier boards while they only have one chipselect
+ * hardwired. Hardcode the number of chipselects to one
+ * for sequioa/rainer board models or read the actual value
+ * from the memory controller register DDR0_10 otherwise.
+ */
+static inline u32 ibm4xx_denali_get_cs(void)
{
- u32 val, max_cs, max_col, max_row;
- u32 cs, col, row, bank, dpath;
- unsigned long memsize;
+ void *devp;
+ char model[64];
+ u32 val, cs;
- val = SDRAM0_READ(DDR0_02);
- if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
- fatal("DDR controller is not initialized\n");
+ devp = finddevice("/");
+ if (!devp)
+ goto read_cs;
- /* get maximum cs col and row values */
- max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
- max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
- max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+ if (getprop(devp, "model", model, sizeof(model)) <= 0)
+ goto read_cs;
+ model[sizeof(model)-1] = 0;
+
+ if (!strcmp(model, "amcc,sequoia") ||
+ !strcmp(model, "amcc,rainier"))
+ return 1;
+
+read_cs:
/* get CS value */
val = SDRAM0_READ(DDR0_10);
cs++;
val = val >> 1;
}
+ return cs;
+}
+
+void ibm4xx_denali_fixup_memsize(void)
+{
+ u32 val, max_cs, max_col, max_row;
+ u32 cs, col, row, bank, dpath;
+ unsigned long memsize;
+
+ val = SDRAM0_READ(DDR0_02);
+ if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
+ fatal("DDR controller is not initialized\n");
+ /* get maximum cs col and row values */
+ max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
+ max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
+ max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
+
+ cs = ibm4xx_denali_get_cs();
if (!cs)
fatal("No memory installed\n");
if (cs > max_cs)
val = SDRAM0_READ(DDR0_14);
if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
- dpath = 8; /* 64 bits */
- else
dpath = 4; /* 32 bits */
+ else
+ dpath = 8; /* 64 bits */
/* get address pins (rows) */
val = SDRAM0_READ(DDR0_42);
BOOTCFLAGS += -fno-stack-protector
endif
-BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
+BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
DTS_FLAGS ?= -p 1024
$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
-src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdtheader := fdt.h libfdt.h libfdt_internal.h
+
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ $(addprefix $(obj)/,$(libfdtheader))
+
src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
- $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
+ $(libfdt) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
$(call cmd,copy_zliblinuxheader)
+quiet_cmd_copy_libfdt = COPY $@
+ cmd_copy_libfdt = cp $< $@
+
+$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,copy_libfdt)
+
$(obj)/empty.c:
@touch $@
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
+ $(libfdt) $(libfdtheader) \
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
quiet_cmd_bootar = BOOTAR $@
cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
+ $(call if_changed_dep,bootcc)
$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,bootcc)
$(obj)/wrapper.a: $(obj-wlib) FORCE
$(call if_changed,bootar)
-hostprogs-y := addnote addRamDisk hack-coff mktree dtc
+hostprogs-y := addnote addRamDisk hack-coff mktree
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
dtstree := $(srctree)/$(src)/dts
wrapper :=$(srctree)/$(src)/wrapper
-wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
+wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
$(wrapper) FORCE
-#############
-# Bits for building dtc
-# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output
-
-dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
-dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
-dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
-
-# prerequisites on generated files needs to be explicit
-$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
-$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
-
-HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
-
-targets += dtc-src/dtc-parser.tab.c
-targets += dtc-src/dtc-lexer.lex.c
-
-clean-files += dtc-src/dtc-parser.tab.h
-
-ifdef DTC_GENPARSER
-BISON = bison
-FLEX = flex
-
-quiet_cmd_bison = BISON $@
- cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
-quiet_cmd_flex = FLEX $@
- cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
-
-$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
- $(call if_changed,bison)
-
-$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
-
-$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
- $(call if_changed,flex)
-endif
-
#############
# Bits for building various flavours of zImage
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
# Rule to build device tree blobs
-$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
- $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
+DTC = $(objtree)/scripts/dtc/dtc
+
+$(obj)/%.dtb: $(dtstree)/%.dts
+ $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
- otheros.bld *.dtb
+ simpleImage.* otheros.bld *.dtb
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
#address-cells = <1>;
#size-cells = <1>;
#interrupt-cells = <2>;
+ device_type = "soc";
compatible = "fsl,mpc8641-soc", "simple-bus";
ranges = <0x0 0xfef00000 0x00100000>;
reg = <0xfef00000 0x100000>; // CCSRBAR 1M
0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
};
+
+ localbus {
+ compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0xfe000000 0x02000000>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ bank-width = <1>;
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x00200000>;
+ };
+ partition@200000 {
+ label = "rootfs";
+ reg = <0x00200000 0x01d00000>;
+ };
+ partition@1f00000 {
+ label = "u-boot";
+ reg = <0x01f00000 0x00060000>;
+ };
+ partition@1f60000 {
+ label = "u-boot-env";
+ reg = <0x01f60000 0x00020000>;
+ };
+ partition@1f80000 {
+ label = "dtb";
+ reg = <0x01f80000 0x00080000>;
+ };
+ };
+ };
+
};
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
- phy-handle = <&phy3>;
+ phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
- phy-handle = <&phy4>;
+ phy-handle = <&phy5>;
mdio@520 {
#address-cells = <1>;
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi2>;
- phy-handle = <&phy3>;
+ phy-handle = <&phy4>;
mdio@520 {
#address-cells = <1>;
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi3>;
- phy-handle = <&phy4>;
+ phy-handle = <&phy5>;
mdio@520 {
#address-cells = <1>;
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
interrupt-parent = <&mpic>;
dfsrr;
- dtt@50 {
+ dtt@48 {
compatible = "national,lm75";
- reg = <0x50>;
+ reg = <0x48>;
};
rtc@68 {
{
int in_fd, out_fd;
int nblks, i;
- uint cksum, *cp;
+ unsigned int cksum, *cp;
struct stat st;
boot_block_t bt;
cksum = 0;
cp = (void *)&bt;
- for (i=0; i<sizeof(bt)/sizeof(uint); i++)
+ for (i = 0; i < sizeof(bt) / sizeof(unsigned int); i++)
cksum += *cp++;
/* Assume zImage is an ELF file, and skip the 64K header.
exit(4);
}
- if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
+ if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
fprintf(stderr, "%s is not an ELF image\n", argv[1]);
exit(4);
}
perror("zImage read");
exit(5);
}
- cp = (uint *)tmpbuf;
- for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
+ cp = (unsigned int *)tmpbuf;
+ for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
cksum += *cp++;
if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
perror("boot-image write");
#include "types.h"
#include "io.h"
#include "stdio.h"
-#include "libfdt/libfdt.h"
+#include <libfdt.h>
BSS_STACK(4*1024);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:47:44 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:14 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:04 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
CONFIG_PPC_LITE5200=y
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:29 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:22 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_MDIO_BITBANG=y
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
#
# LED drivers
#
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:41:33 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:42 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
# CONFIG_PPC_MPC5200_BUGFIX is not set
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 21:42:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Sat Apr 18 00:48:57 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
# CONFIG_PPC_EFIKA is not set
# CONFIG_PPC_LITE5200 is not set
+# CONFIG_PPC_MEDIA5200 is not set
CONFIG_PPC_MPC5200_BUGFIX=y
# CONFIG_PPC_MPC5200_GPIO is not set
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:47 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:05 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:49 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:50 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:07 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:52 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:08 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:09 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:55 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:10 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:11 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:58 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_ASP834x is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:13 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_ASP834x is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:14 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:02 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:15 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:16 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
CONFIG_KSI8560=y
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_FS_ENET_HAS_FCC=y
CONFIG_FS_ENET_MDIO_FCC=y
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:04 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-CONFIG_MPC8536_DS=y
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=524288
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_FSL=y
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-CONFIG_SATA_SIL=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-CONFIG_SKGE=y
-# CONFIG_SKGE_DEBUG is not set
-CONFIG_SKY2=y
-# CONFIG_SKY2_DEBUG is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_VIRQ_DEBUG is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:07 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-# CONFIG_BSD_PROCESS_ACCT_V3 is not set
-# CONFIG_TASKSTATS is not set
-CONFIG_AUDIT=y
-# CONFIG_AUDITSYSCALL is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
-CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-CONFIG_PPC_I8259=y
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
-CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-CONFIG_HIGHMEM=y
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_GENERIC_ISA_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=y
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-CONFIG_NET_KEY=m
-# CONFIG_NET_KEY_MIGRATE is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_ASK_IP_FIB_HASH=y
-# CONFIG_IP_FIB_TRIE is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_NET_IPGRE=y
-CONFIG_NET_IPGRE_BROADCAST=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=y
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=y
-CONFIG_INET6_XFRM_MODE_TUNNEL=y
-CONFIG_INET6_XFRM_MODE_BEET=y
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=y
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-CONFIG_BLK_DEV_NBD=y
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=131072
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_CONSTANTS is not set
-CONFIG_SCSI_LOGGING=y
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-CONFIG_ATA=y
-# CONFIG_ATA_NONSTANDARD is not set
-CONFIG_SATA_PMP=y
-CONFIG_SATA_AHCI=y
-# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
-CONFIG_ATA_SFF=y
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-CONFIG_PATA_ALI=y
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
-# CONFIG_PATA_SCH is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-CONFIG_VITESSE_PHY=y
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-CONFIG_SERIO=y
-CONFIG_SERIO_I8042=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PCIPS2 is not set
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
-# CONFIG_SERIO_XILINX_XPS_PS2 is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-# CONFIG_VT_HW_CONSOLE_BINDING is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_CHARDEV is not set
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_TINY_USB is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-# CONFIG_WATCHDOG is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Console display driver support
-#
-CONFIG_VGA_CONSOLE=y
-# CONFIG_VGACON_SOFT_SCROLLBACK is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-# CONFIG_SND_SEQUENCER is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_VMASTER=y
-CONFIG_SND_AC97_CODEC=y
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-# CONFIG_SND_AC97_POWER_SAVE is not set
-CONFIG_SND_PCI=y
-# CONFIG_SND_AD1889 is not set
-# CONFIG_SND_ALS300 is not set
-# CONFIG_SND_ALS4000 is not set
-# CONFIG_SND_ALI5451 is not set
-# CONFIG_SND_ATIIXP is not set
-# CONFIG_SND_ATIIXP_MODEM is not set
-# CONFIG_SND_AU8810 is not set
-# CONFIG_SND_AU8820 is not set
-# CONFIG_SND_AU8830 is not set
-# CONFIG_SND_AW2 is not set
-# CONFIG_SND_AZT3328 is not set
-# CONFIG_SND_BT87X is not set
-# CONFIG_SND_CA0106 is not set
-# CONFIG_SND_CMIPCI is not set
-# CONFIG_SND_OXYGEN is not set
-# CONFIG_SND_CS4281 is not set
-# CONFIG_SND_CS46XX is not set
-# CONFIG_SND_CS5530 is not set
-# CONFIG_SND_DARLA20 is not set
-# CONFIG_SND_GINA20 is not set
-# CONFIG_SND_LAYLA20 is not set
-# CONFIG_SND_DARLA24 is not set
-# CONFIG_SND_GINA24 is not set
-# CONFIG_SND_LAYLA24 is not set
-# CONFIG_SND_MONA is not set
-# CONFIG_SND_MIA is not set
-# CONFIG_SND_ECHO3G is not set
-# CONFIG_SND_INDIGO is not set
-# CONFIG_SND_INDIGOIO is not set
-# CONFIG_SND_INDIGODJ is not set
-# CONFIG_SND_EMU10K1 is not set
-# CONFIG_SND_EMU10K1X is not set
-# CONFIG_SND_ENS1370 is not set
-# CONFIG_SND_ENS1371 is not set
-# CONFIG_SND_ES1938 is not set
-# CONFIG_SND_ES1968 is not set
-# CONFIG_SND_FM801 is not set
-# CONFIG_SND_HDA_INTEL is not set
-# CONFIG_SND_HDSP is not set
-# CONFIG_SND_HDSPM is not set
-# CONFIG_SND_HIFIER is not set
-# CONFIG_SND_ICE1712 is not set
-# CONFIG_SND_ICE1724 is not set
-CONFIG_SND_INTEL8X0=y
-# CONFIG_SND_INTEL8X0M is not set
-# CONFIG_SND_KORG1212 is not set
-# CONFIG_SND_MAESTRO3 is not set
-# CONFIG_SND_MIXART is not set
-# CONFIG_SND_NM256 is not set
-# CONFIG_SND_PCXHR is not set
-# CONFIG_SND_RIPTIDE is not set
-# CONFIG_SND_RME32 is not set
-# CONFIG_SND_RME96 is not set
-# CONFIG_SND_RME9652 is not set
-# CONFIG_SND_SONICVIBES is not set
-# CONFIG_SND_TRIDENT is not set
-# CONFIG_SND_VIA82XX is not set
-# CONFIG_SND_VIA82XX_MODEM is not set
-# CONFIG_SND_VIRTUOSO is not set
-# CONFIG_SND_VX222 is not set
-# CONFIG_SND_YMFPCI is not set
-CONFIG_SND_PPC=y
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_USX2Y is not set
-# CONFIG_SND_USB_CAIAQ is not set
-# CONFIG_SND_SOC is not set
-# CONFIG_SOUND_PRIME is not set
-CONFIG_AC97_BUS=y
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=y
-# CONFIG_HID_PID is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-# CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
-# CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_OTG is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-CONFIG_USB_MON=y
-# CONFIG_USB_WUSB is not set
-# CONFIG_USB_WUSB_CBAF is not set
-
-#
-# USB Host Controller Drivers
-#
-# CONFIG_USB_C67X00_HCD is not set
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
-CONFIG_USB_EHCI_HCD_PPC_OF=y
-# CONFIG_USB_OXU210HP_HCD is not set
-# CONFIG_USB_ISP116X_HCD is not set
-# CONFIG_USB_ISP1760_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_OHCI_HCD_PCI=y
-CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-# CONFIG_USB_R8A66597_HCD is not set
-# CONFIG_USB_WHCI_HCD is not set
-# CONFIG_USB_HWA_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-# CONFIG_USB_WDM is not set
-# CONFIG_USB_TMC is not set
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-
-#
-# see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_ONETOUCH is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB port drivers
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_SEVSEG is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
-# CONFIG_USB_ISIGHTFW is not set
-# CONFIG_USB_VST is not set
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-# CONFIG_RTC_DRV_DS1374 is not set
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-CONFIG_RTC_DRV_CMOS=y
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-CONFIG_DMADEVICES=y
-
-#
-# DMA Devices
-#
-CONFIG_FSL_DMA=y
-CONFIG_DMA_ENGINE=y
-
-#
-# DMA Clients
-#
-# CONFIG_NET_DMA is not set
-# CONFIG_DMATEST is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=y
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-CONFIG_NTFS_FS=y
-# CONFIG_NTFS_DEBUG is not set
-# CONFIG_NTFS_RW is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_ADFS_FS=m
-# CONFIG_ADFS_FS_RW is not set
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-# CONFIG_BEFS_DEBUG is not set
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-# CONFIG_SQUASHFS is not set
-CONFIG_VXFS_FS=m
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-# CONFIG_ROMFS_FS is not set
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-# CONFIG_UFS_FS_WRITE is not set
-# CONFIG_UFS_DEBUG is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-# CONFIG_NFSD_V3 is not set
-# CONFIG_NFSD_V4 is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-# CONFIG_NLS_CODEPAGE_850 is not set
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-# CONFIG_NLS_ISO8859_1 is not set
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=m
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_HIGHMEM is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-# CONFIG_PPC_EARLY_DEBUG is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_AUTHENC=y
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-CONFIG_CRYPTO_HMAC=y
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
-# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:09 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
+++ /dev/null
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:10 2009
-#
-# CONFIG_PPC64 is not set
-
-#
-# Processor support
-#
-# CONFIG_6xx is not set
-CONFIG_PPC_85xx=y
-# CONFIG_PPC_8xx is not set
-# CONFIG_40x is not set
-# CONFIG_44x is not set
-# CONFIG_E200 is not set
-CONFIG_E500=y
-# CONFIG_PPC_E500MC is not set
-CONFIG_BOOKE=y
-CONFIG_FSL_BOOKE=y
-CONFIG_FSL_EMB_PERFMON=y
-# CONFIG_PHYS_64BIT is not set
-CONFIG_SPE=y
-CONFIG_PPC_MMU_NOHASH=y
-# CONFIG_PPC_MM_SLICES is not set
-# CONFIG_SMP is not set
-CONFIG_PPC32=y
-CONFIG_WORD_SIZE=32
-# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
-CONFIG_MMU=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_HARDIRQS=y
-# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
-CONFIG_IRQ_PER_CPU=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_ARCH_HAS_ILOG2_U32=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
-CONFIG_PPC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_OMIT_FRAME_POINTER=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
-CONFIG_PPC_OF=y
-CONFIG_OF=y
-CONFIG_PPC_UDBG_16550=y
-# CONFIG_GENERIC_TBSYNC is not set
-CONFIG_AUDIT_ARCH=y
-CONFIG_GENERIC_BUG=y
-CONFIG_DEFAULT_UIMAGE=y
-# CONFIG_PPC_DCR_NATIVE is not set
-# CONFIG_PPC_DCR_MMIO is not set
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_GROUP_SCHED=y
-# CONFIG_FAIR_GROUP_SCHED is not set
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-# CONFIG_KALLSYMS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_AIO=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_PCI_QUIRKS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_IOREMAP_PROT=y
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-# CONFIG_FREEZER is not set
-
-#
-# Platform support
-#
-# CONFIG_PPC_CELL is not set
-# CONFIG_PPC_CELL_NATIVE is not set
-# CONFIG_PQ2ADS is not set
-CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-CONFIG_MPC85xx_MDS=y
-# CONFIG_MPC8536_DS is not set
-# CONFIG_MPC85xx_DS is not set
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
-# CONFIG_SBC8560 is not set
-# CONFIG_IPIC is not set
-CONFIG_MPIC=y
-# CONFIG_MPIC_WEIRD is not set
-# CONFIG_PPC_I8259 is not set
-# CONFIG_PPC_RTAS is not set
-# CONFIG_MMIO_NVRAM is not set
-# CONFIG_PPC_MPC106 is not set
-# CONFIG_PPC_970_NAP is not set
-# CONFIG_PPC_INDIRECT_IO is not set
-# CONFIG_GENERIC_IOMAP is not set
-# CONFIG_CPU_FREQ is not set
-CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
-# CONFIG_CPM2 is not set
-# CONFIG_FSL_ULI1575 is not set
-# CONFIG_MPC8xxx_GPIO is not set
-# CONFIG_SIMPLE_GPIO is not set
-
-#
-# Kernel options
-#
-# CONFIG_HIGHMEM is not set
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-# CONFIG_HZ_300 is not set
-# CONFIG_HZ_1000 is not set
-CONFIG_HZ=250
-CONFIG_SCHED_HRTICK=y
-CONFIG_PREEMPT_NONE=y
-# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
-CONFIG_BINFMT_ELF=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_HAVE_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_HAS_WALK_MEMORY=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
-# CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_PPC_4K_PAGES=y
-# CONFIG_PPC_16K_PAGES is not set
-# CONFIG_PPC_64K_PAGES is not set
-CONFIG_FORCE_MAX_ZONEORDER=11
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_CMDLINE_BOOL is not set
-CONFIG_EXTRA_TARGETS=""
-# CONFIG_PM is not set
-CONFIG_SECCOMP=y
-CONFIG_ISA_DMA_API=y
-
-#
-# Bus options
-#
-CONFIG_ZONE_DMA=y
-CONFIG_PPC_INDIRECT_PCI=y
-CONFIG_FSL_SOC=y
-CONFIG_FSL_PCI=y
-CONFIG_PPC_PCI_CHOICE=y
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_SYSCALL=y
-# CONFIG_PCIEPORTBUS is not set
-CONFIG_ARCH_SUPPORTS_MSI=y
-# CONFIG_PCI_MSI is not set
-# CONFIG_PCI_LEGACY is not set
-# CONFIG_PCI_DEBUG is not set
-# CONFIG_PCI_STUB is not set
-# CONFIG_PCCARD is not set
-# CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
-
-#
-# Advanced setup
-#
-# CONFIG_ADVANCED_OPTIONS is not set
-
-#
-# Default settings for advanced configuration options are used
-#
-CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_PAGE_OFFSET=0xc0000000
-CONFIG_KERNEL_START=0xc0000000
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
-CONFIG_TASK_SIZE=0xc0000000
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_COMPAT_NET_DEV_OPS=y
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-# CONFIG_XFRM_MIGRATE is not set
-# CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-CONFIG_SYN_COOKIES=y
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=y
-CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NET_DSA is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-# CONFIG_DCB is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_WIMAX is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
-CONFIG_OF_DEVICE=y
-CONFIG_OF_I2C=y
-# CONFIG_PARPORT is not set
-CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XIP is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_BLK_DEV_HD is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_SGI_IOC4 is not set
-# CONFIG_TIFM_CORE is not set
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_HP_ILO is not set
-# CONFIG_C2PORT is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_DMA=y
-# CONFIG_SCSI_TGT is not set
-# CONFIG_SCSI_NETLINK is not set
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-# CONFIG_BLK_DEV_SD is not set
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-# CONFIG_SCSI_SCAN_ASYNC is not set
-CONFIG_SCSI_WAIT_SCAN=m
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_LIBSAS is not set
-# CONFIG_SCSI_SRP_ATTRS is not set
-CONFIG_SCSI_LOWLEVEL=y
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_SCSI_CXGB3_ISCSI is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_AIC94XX is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_LIBFC is not set
-# CONFIG_FCOE is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-# CONFIG_SCSI_DH is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-# CONFIG_FUSION is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# Enable only one of the two stacks, unless you know what you are doing
-#
-# CONFIG_FIREWIRE is not set
-# CONFIG_IEEE1394 is not set
-# CONFIG_I2O is not set
-# CONFIG_MACINTOSH_DRIVERS is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_ARCNET is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-CONFIG_MARVELL_PHY=y
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_HAPPYMEAL is not set
-# CONFIG_SUNGEM is not set
-# CONFIG_CASSINI is not set
-# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_NET_TULIP is not set
-# CONFIG_HP100 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_NET_PCI is not set
-# CONFIG_B44 is not set
-# CONFIG_ATL2 is not set
-CONFIG_NETDEV_1000=y
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_E1000E is not set
-# CONFIG_IP1000 is not set
-# CONFIG_IGB is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_VIA_VELOCITY is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
-# CONFIG_QLA3XXX is not set
-# CONFIG_ATL1 is not set
-# CONFIG_ATL1E is not set
-# CONFIG_JME is not set
-CONFIG_NETDEV_10000=y
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3_DEPENDS=y
-# CONFIG_CHELSIO_T3 is not set
-# CONFIG_ENIC is not set
-# CONFIG_IXGBE is not set
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-# CONFIG_NETXEN_NIC is not set
-# CONFIG_NIU is not set
-# CONFIG_MLX4_EN is not set
-# CONFIG_MLX4_CORE is not set
-# CONFIG_TEHUTI is not set
-# CONFIG_BNX2X is not set
-# CONFIG_QLGE is not set
-# CONFIG_SFC is not set
-# CONFIG_TR is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-# CONFIG_NOZOMI is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-
-#
-# Non-8250 serial port support
-#
-# CONFIG_SERIAL_UARTLITE is not set
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_HVC_UDBG is not set
-# CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-CONFIG_DEVPORT=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# PC SMBus host controller drivers
-#
-# CONFIG_I2C_ALI1535 is not set
-# CONFIG_I2C_ALI1563 is not set
-# CONFIG_I2C_ALI15X3 is not set
-# CONFIG_I2C_AMD756 is not set
-# CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_ISCH is not set
-# CONFIG_I2C_PIIX4 is not set
-# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_SIS5595 is not set
-# CONFIG_I2C_SIS630 is not set
-# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_VIA is not set
-# CONFIG_I2C_VIAPRO is not set
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_MPC=y
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Graphics adapter I2C/DDC channel drivers
-#
-# CONFIG_I2C_VOODOO3 is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
-
-#
-# Miscellaneous I2C Chip support
-#
-# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_I5K_AMB is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_SIS5595 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VIA686A is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_VT8231 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
-# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_ALIM7101_WDT is not set
-# CONFIG_BOOKE_WDT is not set
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-CONFIG_SSB_POSSIBLE=y
-
-#
-# Sonics Silicon Backplane
-#
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_TWL4030_CORE is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-# CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-
-#
-# Graphics support
-#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-# CONFIG_HIDRAW is not set
-# CONFIG_HID_PID is not set
-
-#
-# Special HID drivers
-#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
-# CONFIG_UWB is not set
-# CONFIG_MMC is not set
-# CONFIG_MEMSTICK is not set
-# CONFIG_NEW_LEDS is not set
-# CONFIG_ACCESSIBILITY is not set
-# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
-# CONFIG_RTC_DEBUG is not set
-
-#
-# RTC interfaces
-#
-CONFIG_RTC_INTF_SYSFS=y
-CONFIG_RTC_INTF_PROC=y
-CONFIG_RTC_INTF_DEV=y
-# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
-# CONFIG_RTC_DRV_TEST is not set
-
-#
-# I2C RTC drivers
-#
-# CONFIG_RTC_DRV_DS1307 is not set
-CONFIG_RTC_DRV_DS1374=y
-# CONFIG_RTC_DRV_DS1672 is not set
-# CONFIG_RTC_DRV_MAX6900 is not set
-# CONFIG_RTC_DRV_RS5C372 is not set
-# CONFIG_RTC_DRV_ISL1208 is not set
-# CONFIG_RTC_DRV_X1205 is not set
-# CONFIG_RTC_DRV_PCF8563 is not set
-# CONFIG_RTC_DRV_PCF8583 is not set
-# CONFIG_RTC_DRV_M41T80 is not set
-# CONFIG_RTC_DRV_S35390A is not set
-# CONFIG_RTC_DRV_FM3130 is not set
-# CONFIG_RTC_DRV_RX8581 is not set
-
-#
-# SPI RTC drivers
-#
-
-#
-# Platform RTC drivers
-#
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_DS1286 is not set
-# CONFIG_RTC_DRV_DS1511 is not set
-# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_DS1742 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
-# CONFIG_RTC_DRV_M48T86 is not set
-# CONFIG_RTC_DRV_M48T35 is not set
-# CONFIG_RTC_DRV_M48T59 is not set
-# CONFIG_RTC_DRV_BQ4802 is not set
-# CONFIG_RTC_DRV_V3020 is not set
-
-#
-# on-CPU RTC drivers
-#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
-# CONFIG_UIO is not set
-# CONFIG_STAGING is not set
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_BTRFS_FS is not set
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-CONFIG_MISC_FILESYSTEMS=y
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_SQUASHFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
-CONFIG_RPCSEC_GSS_KRB5=y
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-# CONFIG_MSDOS_PARTITION is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-# CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-CONFIG_GENERIC_FIND_LAST_BIT=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
-CONFIG_HAVE_LMB=y
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_WARN_DEPRECATED=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
-CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
-# CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
-CONFIG_PPC_EARLY_DEBUG=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
-# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set
-# CONFIG_PPC_EARLY_DEBUG_BEAT is not set
-# CONFIG_PPC_EARLY_DEBUG_44x is not set
-# CONFIG_PPC_EARLY_DEBUG_40x is not set
-# CONFIG_PPC_EARLY_DEBUG_CPM is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_CRYPTO=y
-
-#
-# Crypto core or helper
-#
-# CONFIG_CRYPTO_FIPS is not set
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_ALGAPI2=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_BLKCIPHER2=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Authenticated Encryption with Associated Data
-#
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_SEQIV is not set
-
-#
-# Block modes
-#
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
-# CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_XTS is not set
-
-#
-# Hash modes
-#
-# CONFIG_CRYPTO_HMAC is not set
-# CONFIG_CRYPTO_XCBC is not set
-
-#
-# Digest
-#
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_RMD128 is not set
-# CONFIG_CRYPTO_RMD160 is not set
-# CONFIG_CRYPTO_RMD256 is not set
-# CONFIG_CRYPTO_RMD320 is not set
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_WP512 is not set
-
-#
-# Ciphers
-#
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_SALSA20 is not set
-# CONFIG_CRYPTO_SEED is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-
-#
-# Compression
-#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
-
-#
-# Random Number Generation
-#
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_HW=y
-# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
-# CONFIG_PPC_CLOCK is not set
-CONFIG_PPC_LIB_RHEAP=y
-# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:13 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:18 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:15 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:19 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:17 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:20 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26.2
-# Sat Oct 18 11:06:13 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:21 2009
#
# CONFIG_PPC64 is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
CONFIG_SOCRATES=y
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
# CONFIG_TQM8555 is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_QUICC_ENGINE is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_OLD_DRIVERS is not set
-# CONFIG_CAN_SLCAN is not set
-CONFIG_CAN_SJA1000=y
-CONFIG_CAN_SJA1000_MEM_OF=y
-# CONFIG_CAN_EMS_PCI is not set
-# CONFIG_CAN_IXXAT_PCI is not set
-# CONFIG_CAN_PEAK_PCI is not set
-# CONFIG_CAN_KVASER_PCI is not set
-# CONFIG_CAN_MSCAN is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
CONFIG_MTD_NAND_SOCRATES=y
# CONFIG_MTD_ONENAND is not set
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_TSC2003=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_SOCRATES=y
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
#
# Frame buffer hardware drivers
#
-CONFIG_FB_MB862XX=y
-# CONFIG_FB_MB862XX_PCI_GDC is not set
-CONFIG_FB_MB862XX_LIME=y
-# CONFIG_FB_PRE_INIT_FB is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_FSL_DIU is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_FB_MB862XX=y
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_MB862XX_LIME=y
+# CONFIG_FB_PRE_INIT_FB is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
-CONFIG_RTC_DRV_RX8025=y
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_PPC=y
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:22 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
CONFIG_STX_GP3=y
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:19 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:24 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
+CONFIG_FSL_LBC=y
CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
-# CONFIG_MTD_NAND_FSL_UPM is not set
+CONFIG_MTD_NAND_FSL_UPM=y
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MTD_UBI_BEB_RESERVE=1
-# CONFIG_MTD_UBI_GLUEBI is not set
-
-#
-# UBI debugging options
-#
-# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
-CONFIG_IDE=y
-
-#
-# Please see Documentation/ide/ide.txt for help/info on IDE drives
-#
-CONFIG_IDE_TIMINGS=y
-# CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-# CONFIG_IDE_GD_ATAPI is not set
-# CONFIG_BLK_DEV_IDECD is not set
-# CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_IDE_TASK_IOCTL is not set
-CONFIG_IDE_PROC_FS=y
-
-#
-# IDE chipset support/bugfixes
-#
-# CONFIG_BLK_DEV_PLATFORM is not set
-CONFIG_BLK_DEV_IDEDMA_SFF=y
-
-#
-# PCI IDE chipsets support
-#
-CONFIG_BLK_DEV_IDEPCI=y
-CONFIG_IDEPCI_PCIBUS_ORDER=y
-# CONFIG_BLK_DEV_OFFBOARD is not set
-CONFIG_BLK_DEV_GENERIC=y
-# CONFIG_BLK_DEV_OPTI621 is not set
-CONFIG_BLK_DEV_IDEDMA_PCI=y
-# CONFIG_BLK_DEV_AEC62XX is not set
-# CONFIG_BLK_DEV_ALI15X3 is not set
-# CONFIG_BLK_DEV_AMD74XX is not set
-# CONFIG_BLK_DEV_CMD64X is not set
-# CONFIG_BLK_DEV_TRIFLEX is not set
-# CONFIG_BLK_DEV_CS5520 is not set
-# CONFIG_BLK_DEV_CS5530 is not set
-# CONFIG_BLK_DEV_HPT366 is not set
-# CONFIG_BLK_DEV_JMICRON is not set
-# CONFIG_BLK_DEV_SC1200 is not set
-# CONFIG_BLK_DEV_PIIX is not set
-# CONFIG_BLK_DEV_IT8172 is not set
-# CONFIG_BLK_DEV_IT8213 is not set
-# CONFIG_BLK_DEV_IT821X is not set
-# CONFIG_BLK_DEV_NS87415 is not set
-# CONFIG_BLK_DEV_PDC202XX_OLD is not set
-# CONFIG_BLK_DEV_PDC202XX_NEW is not set
-# CONFIG_BLK_DEV_SVWKS is not set
-# CONFIG_BLK_DEV_SIIMAGE is not set
-# CONFIG_BLK_DEV_SL82C105 is not set
-# CONFIG_BLK_DEV_SLC90E66 is not set
-# CONFIG_BLK_DEV_TRM290 is not set
-CONFIG_BLK_DEV_VIA82CXXX=y
-# CONFIG_BLK_DEV_TC86C001 is not set
-CONFIG_BLK_DEV_IDEDMA=y
+# CONFIG_IDE is not set
#
# SCSI device support
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
-CONFIG_E1000=y
+# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-# CONFIG_USB is not set
-# CONFIG_USB_OTG_WHITELIST is not set
-# CONFIG_USB_OTG_BLACKLIST_HUB is not set
-
-#
-# Enable Host or Gadget support to see Inventra options
-#
-
-#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# OTG and related infrastructure
-#
+# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
-CONFIG_JBD=y
-CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
-# CONFIG_UBIFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:21 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:25 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:22 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:26 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Fri Mar 13 15:36:11 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:31 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Jan 28 23:05:34 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:29 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_MPC8641_HPCN is not set
# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
CONFIG_GEF_SBC310=y
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:30 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_MPC8641_HPCN is not set
# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
CONFIG_GEF_SBC610=y
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_MPC8641_HPCN is not set
# CONFIG_SBC8641D is not set
CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8610=y
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:25 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_MPC8641_HPCN=y
# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:23 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:27 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_MPC8641_HPCN is not set
CONFIG_SBC8641D=y
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:50 2009
#
# CONFIG_PPC64 is not set
CONFIG_REDBOOT=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:51 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_PPC_C2K=y
CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_BRIDGE_NF_EBTABLES=m
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=m
CONFIG_GEN_RTC=m
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
# CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# DMA Devices
#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:27 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:52 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:53 2009
#
# CONFIG_PPC64 is not set
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar 6 00:07:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:54 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:30 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
CONFIG_PPC_CHRP=y
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_RTAS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:32 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
#
# CONFIG_PPC64 is not set
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Fri Feb 6 09:48:53 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon Apr 20 11:06:25 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC5200_SIMPLE=y
CONFIG_PPC_EFIKA=y
CONFIG_PPC_LITE5200=y
+CONFIG_PPC_MEDIA5200=y
CONFIG_PPC_MPC5200_BUGFIX=y
-# CONFIG_PPC_MPC5200_GPIO is not set
+CONFIG_PPC_MPC5200_GPIO=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_TESTS is not set
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_OF_PARTS is not set
+CONFIG_MTD_OF_PARTS=y
# CONFIG_MTD_AR7_PARTS is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
#
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=m
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_MPC52xx_PSC=m
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=m
+# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LTV350QV is not set
# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
# CONFIG_HID_APPLE is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
# CONFIG_HID_CHICONY is not set
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=m
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
CONFIG_CRAMFS=y
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Compression
#
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:33 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:56 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_PRPMC2800 is not set
# CONFIG_PPC_C2K is not set
CONFIG_TSI108_BRIDGE=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_MPIC_WEIRD=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_TSI108_ETH=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:35 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:57 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:36 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:58 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:37 2009
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:40:23 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_MPC85xx_MDS=y
CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
+CONFIG_SOCRATES=y
CONFIG_KSI8560=y
-# CONFIG_STX_GP3 is not set
+CONFIG_STX_GP3=y
CONFIG_TQM8540=y
CONFIG_TQM8541=y
CONFIG_TQM8548=y
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
CONFIG_QUICC_ENGINE=y
-# CONFIG_QE_GPIO is not set
+CONFIG_QE_GPIO=y
CONFIG_CPM2=y
CONFIG_FSL_ULI1575=y
CONFIG_CPM=y
-# CONFIG_MPC8xxx_GPIO is not set
+CONFIG_MPC8xxx_GPIO=y
# CONFIG_SIMPLE_GPIO is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
#
# MII PHY device drivers
#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
+CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_ATL2 is not set
-# CONFIG_FS_ENET is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_UCC_GETH is not set
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SERIAL_CPM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
-# CONFIG_SERIAL_QE is not set
+CONFIG_SERIAL_QE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
-# CONFIG_I2C_CPM is not set
+CONFIG_I2C_CPM=m
# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
CONFIG_DMADEVICES=y
#
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
-# CONFIG_CRYPTO_DEV_TALITOS is not set
+CONFIG_CRYPTO_DEV_TALITOS=y
CONFIG_PPC_CLOCK=y
CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:12 2009
+# Linux kernel version: 2.6.30-rc2
+# Tue Apr 21 15:41:18 2009
#
# CONFIG_PPC64 is not set
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
CONFIG_SMP=y
-CONFIG_NR_CPUS=2
+CONFIG_NR_CPUS=8
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_GPIO=y
# CONFIG_ARCH_NO_VIRT_TO_BUS is not set
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
CONFIG_MPC85xx=y
-# CONFIG_MPC8540_ADS is not set
-# CONFIG_MPC8560_ADS is not set
-# CONFIG_MPC85xx_CDS is not set
-# CONFIG_MPC85xx_MDS is not set
-# CONFIG_MPC8536_DS is not set
+CONFIG_MPC8540_ADS=y
+CONFIG_MPC8560_ADS=y
+CONFIG_MPC85xx_CDS=y
+CONFIG_MPC85xx_MDS=y
+CONFIG_MPC8536_DS=y
CONFIG_MPC85xx_DS=y
-# CONFIG_KSI8560 is not set
-# CONFIG_STX_GP3 is not set
-# CONFIG_TQM8540 is not set
-# CONFIG_TQM8541 is not set
-# CONFIG_TQM8548 is not set
-# CONFIG_TQM8555 is not set
-# CONFIG_TQM8560 is not set
-# CONFIG_SBC8548 is not set
+CONFIG_SOCRATES=y
+CONFIG_KSI8560=y
+CONFIG_STX_GP3=y
+CONFIG_TQM8540=y
+CONFIG_TQM8541=y
+CONFIG_TQM8548=y
+CONFIG_TQM8555=y
+CONFIG_TQM8560=y
+CONFIG_SBC8548=y
# CONFIG_SBC8560 is not set
+CONFIG_TQM85xx=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
-# CONFIG_QUICC_ENGINE is not set
-# CONFIG_CPM2 is not set
+CONFIG_QUICC_ENGINE=y
+CONFIG_QE_GPIO=y
+CONFIG_CPM2=y
CONFIG_FSL_ULI1575=y
-# CONFIG_MPC8xxx_GPIO is not set
+CONFIG_CPM=y
+CONFIG_MPC8xxx_GPIO=y
# CONFIG_SIMPLE_GPIO is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_GPIO=y
CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_FSL is not set
+CONFIG_SATA_FSL=y
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
#
# MII PHY device drivers
#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
-# CONFIG_CICADA_PHY is not set
+CONFIG_CICADA_PHY=y
CONFIG_VITESSE_PHY=y
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
-# CONFIG_FIXED_PHY is not set
+CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_ATL2 is not set
+CONFIG_FS_ENET=y
+CONFIG_FS_ENET_HAS_SCC=y
+CONFIG_FS_ENET_HAS_FCC=y
+# CONFIG_FS_ENET_MDIO_FCC is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
+CONFIG_UCC_GETH=y
+# CONFIG_UGETH_MAGIC_PACKET is not set
+# CONFIG_UGETH_TX_ON_DEMAND is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_CPM is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
+CONFIG_SERIAL_QE=m
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
+CONFIG_I2C_CPM=m
+# CONFIG_I2C_GPIO is not set
CONFIG_I2C_MPC=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-# CONFIG_GPIOLIB is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+# CONFIG_GPIO_XILINX is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+
+#
+# SPI GPIO expanders:
+#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_FSL is not set
+CONFIG_USB_EHCI_FSL=y
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
#
# USB Device Class drivers
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
-# CONFIG_EDAC is not set
+CONFIG_EDAC=y
+
+#
+# Reporting subsystems
+#
+# CONFIG_EDAC_DEBUG is not set
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_EDAC_MPC85XX=y
+# CONFIG_EDAC_AMD8131 is not set
+# CONFIG_EDAC_AMD8111 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
-# CONFIG_DMADEVICES is not set
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_FSL_DMA=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_UCC_SLOW=y
+CONFIG_UCC_FAST=y
+CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
# CONFIG_XMON is not set
# CONFIG_IRQSTACKS is not set
+CONFIG_VIRQ_DEBUG=y
# CONFIG_BDI_SWITCH is not set
# CONFIG_PPC_EARLY_DEBUG is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_CRYPTO_DEV_TALITOS=y
-# CONFIG_PPC_CLOCK is not set
+CONFIG_PPC_CLOCK=y
+CONFIG_PPC_LIB_RHEAP=y
# CONFIG_VIRTUALIZATION is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
#
# CONFIG_PPC64 is not set
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
CONFIG_NETDEV_1000=y
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_MPC8641_HPCN=y
CONFIG_SBC8641D=y
CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
CONFIG_GEF_SBC610=y
CONFIG_MPC8641=y
CONFIG_MPC8610=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:41 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:01 2009
#
# CONFIG_PPC64 is not set
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:42 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:02 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:44 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:03 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_PPC_PRPMC2800=y
# CONFIG_PPC_C2K is not set
CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar 6 00:09:08 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:04 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# define elf_read_implies_exec(ex, exec_stk) (test_thread_flag(TIF_32BIT) ? \
(exec_stk != EXSTACK_DISABLE_X) : 0)
#else
-# define SET_PERSONALITY(ex) set_personality(PER_LINUX)
+# define SET_PERSONALITY(ex) \
+ set_personality(PER_LINUX | (current->personality & (~PER_MASK)))
+# define elf_read_implies_exec(ex, exec_stk) (exec_stk != EXSTACK_DISABLE_X)
#endif /* __powerpc64__ */
extern int dcache_bsize;
PPC_LONG "1b,4b,2b,4b\n" \
".previous" \
: "=&r" (oldval), "=&r" (ret) \
- : "b" (uaddr), "i" (-EFAULT), "1" (oparg) \
+ : "b" (uaddr), "i" (-EFAULT), "r" (oparg) \
: "cr0", "memory")
static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
switch (op) {
case FUTEX_OP_SET:
- __futex_atomic_op("", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("mr %1,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ADD:
- __futex_atomic_op("add %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("add %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_OR:
- __futex_atomic_op("or %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("or %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_ANDN:
- __futex_atomic_op("andc %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("andc %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
case FUTEX_OP_XOR:
- __futex_atomic_op("xor %1,%0,%1\n", ret, oldval, uaddr, oparg);
+ __futex_atomic_op("xor %1,%0,%4\n", ret, oldval, uaddr, oparg);
break;
default:
ret = -ENOSYS;
struct device_node;
struct iommu_table;
-/* Creates table for an individual device node */
-extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
- struct device_node *dn);
-
/* Get table parameters from HV */
extern void iommu_table_getparms_iSeries(unsigned long busno,
unsigned char slotno, unsigned char virtbus,
*
*/
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
- return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
- of_unregister_driver(drv);
-}
-
/* Platform devices and busses creation */
extern struct of_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
prop = of_get_property(np, "interrupts", NULL);
if (!prop)
continue;
- if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL) != NULL)
+ if (parport_pc_probe_port(io1, io2, prop[0], autodma, NULL, 0) != NULL)
count++;
}
return count;
#define PPC_INST_STSWI 0x7c0005aa
#define PPC_INST_STSWX 0x7c00052a
-#define PPC_INST_TLBILX 0x7c000626
+#define PPC_INST_TLBILX 0x7c000024
#define PPC_INST_WAIT 0x7c00007c
/* macros to insert fields into opcodes */
#ifndef _ASM_POWERPC_PPC_ASM_H
#define _ASM_POWERPC_PPC_ASM_H
+#include <linux/init.h>
#include <linux/stringify.h>
#include <asm/asm-compat.h>
#include <asm/processor.h>
GLUE(.,name):
#define _INIT_GLOBAL(name) \
- .section ".text.init.refok"; \
+ __REF; \
.align 2 ; \
.globl name; \
.globl GLUE(.,name); \
GLUE(.,name):
#define _INIT_STATIC(name) \
- .section ".text.init.refok"; \
+ __REF; \
.align 2 ; \
.section ".opd","aw"; \
name: \
extern unsigned int rtas_data;
extern int mem_init_done; /* set on boot once kmalloc can be called */
extern int init_bootmem_done; /* set on !NUMA once bootmem is available */
-extern unsigned long memory_limit;
+extern phys_addr_t memory_limit;
extern unsigned long klimit;
extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power5+",
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power5+",
},
{ /* Power6 */
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power6",
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power6",
},
{ /* 2.06-compliant processor, i.e. Power7 "architected" mode */
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power7",
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
.platform = "power7",
},
{ /* Power7 */
* and, in that case, keep the current value for
* oprofile_cpu_type.
*/
- if (old.oprofile_cpu_type == NULL)
- t->oprofile_cpu_type = s->oprofile_cpu_type;
+ if (old.oprofile_cpu_type != NULL) {
+ t->oprofile_cpu_type = old.oprofile_cpu_type;
+ t->oprofile_type = old.oprofile_type;
+ }
}
*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
*
*/
+#include <linux/init.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
mtspr SPRN_DBAT##n##L,RB; \
1:
- .section .text.head, "ax"
+ __HEAD
.stabs "arch/powerpc/kernel/",N_SO,0,0,0f
.stabs "head_32.S",N_SO,0,0,0f
0:
*
*/
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
*
* This is all going to change RSN when we add bi_recs....... -- Dan
*/
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
* option) any later version.
*/
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
* r7 - End of kernel command line string
*
*/
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
/*
*
*/
+#include <linux/init.h>
#include <asm/processor.h>
#include <asm/page.h>
#include <asm/mmu.h>
#else
#define DO_8xx_CPU6(val, reg)
#endif
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
* option) any later version.
*/
+#include <linux/init.h>
#include <linux/threads.h>
#include <asm/processor.h>
#include <asm/page.h>
* r7 - End of kernel command line string
*
*/
- .section .text.head, "ax"
+ __HEAD
_ENTRY(_stext);
_ENTRY(_start);
/*
/* Crash kernel trumps memory limit */
if (memory_limit && memory_limit <= crashk_res.end) {
memory_limit = crashk_res.end + 1;
- printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
- memory_limit);
+ printk("Adjusted memory limit for crashkernel, now 0x%llx\n",
+ (unsigned long long)memory_limit);
}
printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
for_each_pci_dev(dev) {
pci_read_config_word(dev, PCI_COMMAND, &command);
- for (idx = 0; idx < 6; idx++) {
+ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
r = &dev->resource[idx];
if (r->parent) /* Already allocated */
continue;
if (!r->flags || (r->flags & IORESOURCE_UNSET))
continue; /* Not assigned at all */
+ /* We only allocate ROMs on pass 1 just in case they
+ * have been screwed up by firmware
+ */
+ if (idx == PCI_ROM_RESOURCE )
+ disabled = 1;
if (r->flags & IORESOURCE_IO)
disabled = !(command & PCI_COMMAND_IO);
else
if (pass)
continue;
r = &dev->resource[PCI_ROM_RESOURCE];
- if (r->flags & IORESOURCE_ROM_ENABLE) {
+ if (r->flags) {
/* Turn the ROM off, leave the resource region,
* but keep it unregistered.
*/
u32 reg;
- pr_debug("PCI: Switching off ROM of %s\n",
- pci_name(dev));
- r->flags &= ~IORESOURCE_ROM_ENABLE;
pci_read_config_dword(dev, dev->rom_base_reg, ®);
- pci_write_config_dword(dev, dev->rom_base_reg,
- reg & ~PCI_ROM_ADDRESS_ENABLE);
+ if (reg & PCI_ROM_ADDRESS_ENABLE) {
+ pr_debug("PCI: Switching off ROM of %s\n",
+ pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_write_config_dword(dev, dev->rom_base_reg,
+ reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
}
}
}
return def;
}
-static unsigned int pci_parse_of_flags(u32 addr0)
+static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
{
unsigned int flags = 0;
if (addr0 & 0x40000000)
flags |= IORESOURCE_PREFETCH
| PCI_BASE_ADDRESS_MEM_PREFETCH;
+ /* Note: We don't know whether the ROM has been left enabled
+ * by the firmware or not. We mark it as disabled (ie, we do
+ * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+ * do a config space read, it will be force-enabled if needed
+ */
+ if (!bridge && (addr0 & 0xff) == 0x30)
+ flags |= IORESOURCE_READONLY;
} else if (addr0 & 0x01000000)
flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+ if (flags)
+ flags |= IORESOURCE_SIZEALIGN;
return flags;
}
return;
pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
for (; proplen >= 20; proplen -= 20, addrs += 5) {
- flags = pci_parse_of_flags(addrs[0]);
+ flags = pci_parse_of_flags(addrs[0], 0);
if (!flags)
continue;
base = of_read_number(&addrs[1], 2);
}
i = 1;
for (; len >= 32; len -= 32, ranges += 8) {
- flags = pci_parse_of_flags(ranges[0]);
+ flags = pci_parse_of_flags(ranges[0], 1);
size = of_read_number(&ranges[6], 2);
if (flags == 0 || size == 0)
continue;
return 1;
memory_limit = PAGE_ALIGN(memparse(p, &p));
- DBG("memory limit = 0x%lx\n", memory_limit);
+ DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
return 0;
}
void __init early_init_devtree(void *params)
{
- unsigned long limit;
+ phys_addr_t limit;
DBG(" -> early_init_devtree(%p)\n", params);
limit = memory_limit;
if (! limit) {
- unsigned long memsize;
+ phys_addr_t memsize;
/* Ensure that total memory size is page-aligned, because
* otherwise mark_bootmem() gets upset. */
lmb_analyze();
lmb_dump_all();
- DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
+ DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
/* We may need to relocate the flat tree, do it now.
* FIXME .. and the initrd too? */
struct device_node *p;
const u32 *intspec, *tmp, *addr;
u32 intsize, intlen;
- int res;
+ int res = -EINVAL;
DBG("of_irq_map_one: dev=%s, index=%d\n", device->full_name, index);
/* Get size of interrupt specifier */
tmp = of_get_property(p, "#interrupt-cells", NULL);
- if (tmp == NULL) {
- of_node_put(p);
- return -EINVAL;
- }
+ if (tmp == NULL)
+ goto out;
intsize = *tmp;
DBG(" intsize=%d intlen=%d\n", intsize, intlen);
/* Check index */
if ((index + 1) * intsize > intlen)
- return -EINVAL;
+ goto out;
/* Get new specifier and map it */
res = of_irq_map_raw(p, intspec + index * intsize, intsize,
addr, out_irq);
+out:
of_node_put(p);
return res;
}
#include <linux/clockchips.h>
#include <linux/clocksource.h>
-static cycle_t rtc_read(void);
+static cycle_t rtc_read(struct clocksource *);
static struct clocksource clocksource_rtc = {
.name = "rtc",
.rating = 400,
.read = rtc_read,
};
-static cycle_t timebase_read(void);
+static cycle_t timebase_read(struct clocksource *);
static struct clocksource clocksource_timebase = {
.name = "timebase",
.rating = 400,
}
/* clocksource code */
-static cycle_t rtc_read(void)
+static cycle_t rtc_read(struct clocksource *cs)
{
return (cycle_t)get_rtc();
}
-static cycle_t timebase_read(void)
+static cycle_t timebase_read(struct clocksource *cs)
{
return (cycle_t)get_tb();
}
/* Text and gots */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
ALIGN_FUNCTION();
- *(.text.head)
+ HEAD_TEXT
_text = .;
- *(.text .fixup .text.init.refok .exit.text.refok __ftr_alt_*)
+ /* careful! __ftr_alt_* sections need to be close to .text */
+ *(.text .fixup __ftr_alt_* .ref.text)
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
}
#ifdef CONFIG_SMP
-void __init early_init_mmu_secondary(void)
+void __cpuinit early_init_mmu_secondary(void)
{
/* Initialize hash table for that CPU */
if (!firmware_has_feature(FW_FEATURE_LPAR))
int init_bootmem_done;
int mem_init_done;
-unsigned long memory_limit;
+phys_addr_t memory_limit;
#ifdef CONFIG_HIGHMEM
pte_t *kmap_pte;
void flush_tlb_mm(struct mm_struct *mm)
{
- cpumask_t cpu_mask;
unsigned int pid;
preempt_disable();
isync
1: wrtee r10
blr
-#elif
+#else
#error Unsupported processor type !
#endif
static unsigned long reset_value[OP_MAX_COUNTER];
static int oprofile_running;
+static int use_slot_nums;
/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
static u32 mmcr0_val;
else
mmcr0_val |= MMCR0_PROBLEM_DISABLE;
+ if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
+ __is_processor(PV_970) || __is_processor(PV_970FX) ||
+ __is_processor(PV_970MP) || __is_processor(PV_970GX) ||
+ __is_processor(PV_POWER5) || __is_processor(PV_POWER5p))
+ use_slot_nums = 1;
+
return 0;
}
mmcra = mfspr(SPRN_MMCRA);
- if (mmcra & MMCRA_SAMPLE_ENABLE) {
+ if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
if (slot > 1)
pc += 4 * (slot - 1);
config XILINX_VIRTEX
bool
+ select DEFAULT_UIMAGE
config XILINX_VIRTEX_II_PRO
bool
# Xilinx specific config options.
config XILINX_VIRTEX
bool
+ select DEFAULT_UIMAGE
# Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
config XILINX_VIRTEX_5_FXT
config PPC_CELL_NATIVE
bool
select PPC_CELL_COMMON
- select PPC_OF_PLATFORM_PCI
select MPIC
select IBM_NEW_EMAC_EMAC4
select IBM_NEW_EMAC_RGMII
bool "IBM Cell Blade"
depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
+ select PPC_OF_PLATFORM_PCI
+ select PCI
select MMIO_NVRAM
select PPC_UDBG_16550
select UDBG_RTAS_CONSOLE
bool "Toshiba's Cell Reference Set 'Celleb' Architecture"
depends on PPC64 && PPC_BOOK3S
select PPC_CELL_NATIVE
+ select PPC_OF_PLATFORM_PCI
+ select PCI
select HAS_TXX9_SERIAL
select PPC_UDBG_BEAT
select USB_OHCI_BIG_ENDIAN_MMIO
area->nid = nid;
area->order = order;
- area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order);
+ area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE,
+ area->order);
- if (!area->pages)
+ if (!area->pages) {
+ printk(KERN_WARNING "%s: no page on node %d\n",
+ __func__, area->nid);
goto out_free_area;
+ }
- addr = __pa(page_address(area->pages));
+ /*
+ * We move the ptcal area to the middle of the allocated
+ * page, in order to avoid prefetches in memcpy and similar
+ * functions stepping on it.
+ */
+ addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1);
+ printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n",
+ __func__, area->nid, addr);
ret = -EIO;
if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid,
if (!machine_is(mpc86xx_hpcd))
return;
- /* Interrupt Disable, Needed when SATA disabled */
- pci_read_config_word(dev, PCI_COMMAND, &temp);
- temp |= 1<<10;
- pci_write_config_word(dev, PCI_COMMAND, temp);
-
pci_read_config_byte(dev, 0x83, &c);
c |= 0x80;
pci_write_config_byte(dev, 0x83, c);
config VIOCD
tristate "iSeries Virtual I/O CD support"
+ depends on BLOCK
select VIOPATH
help
If you are running Linux on an IBM iSeries system and you want to
}
-void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
+static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
{
struct iommu_table *tbl;
+ struct device_node *dn = pdev->sysdata;
struct pci_dn *pdn = PCI_DN(dn);
const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
kfree(tbl);
pdev->dev.archdata.dma_data = pdn->iommu_table;
}
+#else
+#define pci_dma_dev_setup_iseries NULL
#endif
static struct iommu_table veth_iommu_table;
ppc_md.tce_build = tce_build_iSeries;
ppc_md.tce_free = tce_free_iSeries;
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries;
set_pci_dma_ops(&dma_iommu_ops);
}
pdev->sysdata = node;
allocate_device_bars(pdev);
iseries_device_information(pdev, bus, *sub_bus);
- iommu_devnode_init_iSeries(pdev, node);
}
/*
#include "pasemi.h"
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
/* SDC reset register, must be pre-mapped at reset time */
static void __iomem *reset_reg;
*
*/
-static void update_flash_db(void)
+static void __maybe_unused update_flash_db(void)
{
int result;
int file;
DEFINE_MUTEX(ps3_gpu_mutex);
EXPORT_SYMBOL_GPL(ps3_gpu_mutex);
-#if !defined(CONFIG_SMP)
-static void smp_send_stop(void) {}
-#endif
-
static union ps3_firmware_version ps3_firmware_version;
void ps3_get_firmware_version(union ps3_firmware_version *v)
#include <asm/smp.h>
#include <asm/system.h>
#include <asm/uaccess.h>
+#include <asm/firmware.h>
#include "plpar_wrappers.h"
if (!driver)
return;
+ dev->error_state = pci_channel_io_normal;
+
eeh_enable_irq(dev);
if (!driver->err_handler ||
#include <linux/types.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
+#include <linux/device.h>
#include <linux/rio.h>
#include <linux/rio_drv.h>
#include <linux/of_platform.h>
};
struct rio_priv {
+ struct device *dev;
void __iomem *regs_win;
struct rio_atmu_regs __iomem *atmu_regs;
struct rio_atmu_regs __iomem *maint_atmu_regs;
for (i = 0; i < priv->msg_tx_ring.size; i++) {
priv->msg_tx_ring.virt_buffer[i] =
- dma_alloc_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_alloc_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
&priv->msg_tx_ring.phys_buffer[i], GFP_KERNEL);
if (!priv->msg_tx_ring.virt_buffer[i]) {
rc = -ENOMEM;
for (j = 0; j < priv->msg_tx_ring.size; j++)
if (priv->msg_tx_ring.virt_buffer[j])
- dma_free_coherent(NULL,
+ dma_free_coherent(priv->dev,
RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.
virt_buffer[j],
}
/* Initialize outbound message descriptor ring */
- priv->msg_tx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_tx_ring.virt = dma_alloc_coherent(priv->dev,
priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
&priv->msg_tx_ring.phys, GFP_KERNEL);
if (!priv->msg_tx_ring.virt) {
return rc;
out_irq:
- dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ dma_free_coherent(priv->dev,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
out_dma:
for (i = 0; i < priv->msg_tx_ring.size; i++)
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.virt_buffer[i],
priv->msg_tx_ring.phys_buffer[i]);
out_be32(&priv->msg_regs->omr, 0);
/* Free ring */
- dma_free_coherent(NULL, priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
+ dma_free_coherent(priv->dev,
+ priv->msg_tx_ring.size * RIO_MSG_DESC_SIZE,
priv->msg_tx_ring.virt, priv->msg_tx_ring.phys);
/* Free interrupt */
priv->msg_rx_ring.virt_buffer[i] = NULL;
/* Initialize inbound message ring */
- priv->msg_rx_ring.virt = dma_alloc_coherent(NULL,
+ priv->msg_rx_ring.virt = dma_alloc_coherent(priv->dev,
priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
&priv->msg_rx_ring.phys, GFP_KERNEL);
if (!priv->msg_rx_ring.virt) {
rc = request_irq(IRQ_RIO_RX(mport), fsl_rio_rx_handler, 0,
"msg_rx", (void *)mport);
if (rc < 0) {
- dma_free_coherent(NULL, RIO_MSG_BUFFER_SIZE,
+ dma_free_coherent(priv->dev, RIO_MSG_BUFFER_SIZE,
priv->msg_tx_ring.virt_buffer[i],
priv->msg_tx_ring.phys_buffer[i]);
goto out;
out_be32(&priv->msg_regs->imr, 0);
/* Free ring */
- dma_free_coherent(NULL, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
+ dma_free_coherent(priv->dev, priv->msg_rx_ring.size * RIO_MAX_MSG_SIZE,
priv->msg_rx_ring.virt, priv->msg_rx_ring.phys);
/* Free interrupt */
}
/* Initialize inbound doorbells */
- priv->dbell_ring.virt = dma_alloc_coherent(NULL, 512 *
+ priv->dbell_ring.virt = dma_alloc_coherent(priv->dev, 512 *
DOORBELL_MESSAGE_SIZE, &priv->dbell_ring.phys, GFP_KERNEL);
if (!priv->dbell_ring.virt) {
printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
"dbell_rx", (void *)mport);
if (rc < 0) {
iounmap(priv->dbell_win);
- dma_free_coherent(NULL, 512 * DOORBELL_MESSAGE_SIZE,
+ dma_free_coherent(priv->dev, 512 * DOORBELL_MESSAGE_SIZE,
priv->dbell_ring.virt, priv->dbell_ring.phys);
printk(KERN_ERR
"MPC85xx RIO: unable to request inbound doorbell irq");
rio_init_mbox_res(&port->riores[RIO_OUTB_MBOX_RESOURCE], 0, 0);
strcpy(port->name, "RIO0 mport");
+ priv->dev = &dev->dev;
+
port->ops = ops;
port->host_deviceid = fsl_rio_get_hdid(port->id);
arch_initcall(of_add_fixed_phys);
#endif /* CONFIG_FIXED_PHY */
-#ifdef CONFIG_PPC_83xx
-static int __init mpc83xx_wdt_init(void)
-{
- struct resource r;
- struct device_node *np;
- struct platform_device *dev;
- u32 freq = fsl_get_sys_freq();
- int ret;
-
- np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
-
- if (!np) {
- ret = -ENODEV;
- goto nodev;
- }
-
- memset(&r, 0, sizeof(r));
-
- ret = of_address_to_resource(np, 0, &r);
- if (ret)
- goto err;
-
- dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
- if (IS_ERR(dev)) {
- ret = PTR_ERR(dev);
- goto err;
- }
-
- ret = platform_device_add_data(dev, &freq, sizeof(freq));
- if (ret)
- goto unreg;
-
- of_node_put(np);
- return 0;
-
-unreg:
- platform_device_unregister(dev);
-err:
- of_node_put(np);
-nodev:
- return ret;
-}
-
-arch_initcall(mpc83xx_wdt_init);
-#endif
-
static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
{
if (!phy_type)
memset(mpic, 0, sizeof(struct mpic));
mpic->name = name;
- mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
- isu_size, &mpic_host_ops,
- flags & MPIC_LARGE_VECTORS ? 2048 : 256);
- if (mpic->irqhost == NULL)
- return NULL;
-
- mpic->irqhost->host_data = mpic;
mpic->hc_irq = mpic_irq_chip;
mpic->hc_irq.typename = name;
if (flags & MPIC_PRIMARY)
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
+ mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+ isu_size ? isu_size : mpic->num_sources,
+ &mpic_host_ops,
+ flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+ if (mpic->irqhost == NULL)
+ return NULL;
+
+ mpic->irqhost->host_data = mpic;
+
/* Display version */
switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
case 1:
static struct irq_host *master_irqhost;
+#define XILINX_INTC_MAXIRQS (32)
+
+/* The following table allows the interrupt type, edge or level,
+ * to be cached after being read from the device tree until the interrupt
+ * is mapped
+ */
+static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
+
+/* Map the interrupt type from the device tree to the interrupt types
+ * used by the interrupt subsystem
+ */
+static unsigned char xilinx_intc_map_senses[] = {
+ IRQ_TYPE_EDGE_RISING,
+ IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_LEVEL_HIGH,
+ IRQ_TYPE_LEVEL_LOW,
+};
+
/*
- * IRQ Chip operations
+ * The interrupt controller is setup such that it doesn't work well with
+ * the level interrupt handler in the kernel because the handler acks the
+ * interrupt before calling the application interrupt handler. To deal with
+ * that, we use 2 different irq chips so that different functions can be
+ * used for level and edge type interrupts.
+ *
+ * IRQ Chip common (across level and edge) operations
*/
static void xilinx_intc_mask(unsigned int virq)
{
out_be32(regs + XINTC_CIE, 1 << irq);
}
-static void xilinx_intc_unmask(unsigned int virq)
+static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
+{
+ struct irq_desc *desc = get_irq_desc(virq);
+
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+ if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ desc->status |= IRQ_LEVEL;
+ return 0;
+}
+
+/*
+ * IRQ Chip level operations
+ */
+static void xilinx_intc_level_unmask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void * regs = get_irq_chip_data(virq);
pr_debug("unmask: %d\n", irq);
out_be32(regs + XINTC_SIE, 1 << irq);
+
+ /* ack level irqs because they can't be acked during
+ * ack function since the handle_level_irq function
+ * acks the irq before calling the inerrupt handler
+ */
+ out_be32(regs + XINTC_IAR, 1 << irq);
}
-static void xilinx_intc_ack(unsigned int virq)
+static struct irq_chip xilinx_intc_level_irqchip = {
+ .typename = "Xilinx Level INTC",
+ .mask = xilinx_intc_mask,
+ .mask_ack = xilinx_intc_mask,
+ .unmask = xilinx_intc_level_unmask,
+ .set_type = xilinx_intc_set_type,
+};
+
+/*
+ * IRQ Chip edge operations
+ */
+static void xilinx_intc_edge_unmask(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void *regs = get_irq_chip_data(virq);
+ pr_debug("unmask: %d\n", irq);
+ out_be32(regs + XINTC_SIE, 1 << irq);
+}
+
+static void xilinx_intc_edge_ack(unsigned int virq)
{
int irq = virq_to_hw(virq);
void * regs = get_irq_chip_data(virq);
out_be32(regs + XINTC_IAR, 1 << irq);
}
-static struct irq_chip xilinx_intc_irqchip = {
- .typename = "Xilinx INTC",
+static struct irq_chip xilinx_intc_edge_irqchip = {
+ .typename = "Xilinx Edge INTC",
.mask = xilinx_intc_mask,
- .unmask = xilinx_intc_unmask,
- .ack = xilinx_intc_ack,
+ .unmask = xilinx_intc_edge_unmask,
+ .ack = xilinx_intc_edge_ack,
+ .set_type = xilinx_intc_set_type,
};
/*
* IRQ Host operations
*/
+
+/**
+ * xilinx_intc_xlate - translate virq# from device tree interrupts property
+ */
+static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_flags)
+{
+ if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
+ return -EINVAL;
+
+ /* keep a copy of the interrupt type til the interrupt is mapped
+ */
+ xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
+
+ /* Xilinx uses 2 interrupt entries, the 1st being the h/w
+ * interrupt number, the 2nd being the interrupt type, edge or level
+ */
+ *out_hwirq = intspec[0];
+ *out_flags = xilinx_intc_map_senses[intspec[1]];
+
+ return 0;
+}
static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t irq)
{
set_irq_chip_data(virq, h->host_data);
- set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq);
- set_irq_type(virq, IRQ_TYPE_NONE);
+
+ if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
+ xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
+ set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip,
+ handle_level_irq);
+ } else {
+ set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
+ handle_edge_irq);
+ }
return 0;
}
static struct irq_host_ops xilinx_intc_ops = {
.map = xilinx_intc_map,
+ .xlate = xilinx_intc_xlate,
};
struct irq_host * __init
out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
/* Allocate and initialize an irq_host structure. */
- irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1);
+ irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS,
+ &xilinx_intc_ops, -1);
if (!irq)
panic(__FILE__ ": Cannot allocate IRQ host\n");
irq->host_data = regs;
/*
* Ops list
*/
-static DEFINE_SPINLOCK(appldata_ops_lock);
+static DEFINE_MUTEX(appldata_ops_mutex);
static LIST_HEAD(appldata_ops_list);
i = 0;
get_online_cpus();
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_for_each(lh, &appldata_ops_list) {
ops = list_entry(lh, struct appldata_ops, list);
if (ops->active == 1) {
ops->callback(ops->data);
}
}
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
put_online_cpus();
}
struct vtimer_list *timer;
u64 expires;
} *args = p;
- mod_virt_timer(args->timer, args->expires);
+ mod_virt_timer_periodic(args->timer, args->expires);
}
#define APPLDATA_ADD_TIMER 0
struct list_head *lh;
found = 0;
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_for_each(lh, &appldata_ops_list) {
tmp_ops = list_entry(lh, struct appldata_ops, list);
if (&tmp_ops->ctl_table[2] == ctl) {
}
}
if (!found) {
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
return -ENODEV;
}
ops = ctl->data;
if (!try_module_get(ops->owner)) { // protect this function
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
return -ENODEV;
}
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
if (!*lenp || *ppos) {
*lenp = 0;
return -EFAULT;
}
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
if ((buf[0] == '1') && (ops->active == 0)) {
// protect work queue callback
if (!try_module_get(ops->owner)) {
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
module_put(ops->owner);
return -ENODEV;
}
"failed with rc=%d\n", ops->name, rc);
module_put(ops->owner);
}
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
out:
*lenp = len;
*ppos += len;
if (!ops->ctl_table)
return -ENOMEM;
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_add(&ops->list, &appldata_ops_list);
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
ops->ctl_table[0].procname = appldata_proc_name;
ops->ctl_table[0].maxlen = 0;
goto out;
return 0;
out:
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_del(&ops->list);
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
kfree(ops->ctl_table);
return -ENOMEM;
}
*/
void appldata_unregister_ops(struct appldata_ops *ops)
{
- spin_lock(&appldata_ops_lock);
+ mutex_lock(&appldata_ops_mutex);
list_del(&ops->list);
- spin_unlock(&appldata_ops_lock);
+ mutex_unlock(&appldata_ops_mutex);
unregister_sysctl_table(ops->sysctl_header);
kfree(ops->ctl_table);
}
{
/*
* don't put large structures on the stack, we are
- * serialized through the appldata_ops_lock and can use static
+ * serialized through the appldata_ops_mutex and can use static
*/
static struct sysinfo val;
unsigned long ev[NR_VM_EVENT_ITEMS];
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Wed Feb 11 10:07:16 2009
+# Linux kernel version: 2.6.30-rc3
+# Thu Apr 23 09:29:52 2009
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
CONFIG_GENERIC_LOCKBREAK=y
CONFIG_PGSTE=y
CONFIG_VIRT_CPU_ACCOUNTING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_S390=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+CONFIG_HAVE_DEFAULT_NO_SPIN_MUTEXES=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_INIT_ALL_POSSIBLE=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# I/O subsystem configuration
#
-CONFIG_MACHCHK_WARNING=y
CONFIG_QDIO=y
CONFIG_CHSC_SCH=m
CONFIG_KEXEC=y
# CONFIG_ZFCPDUMP is not set
CONFIG_S390_GUEST=y
+CONFIG_SECCOMP=y
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
CONFIG_CAN_VCAN=m
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ZFCP=y
CONFIG_SCSI_DH=m
CONFIG_SCSI_DH_HP_SW=m
CONFIG_SCSI_DH_EMC=m
CONFIG_SCSI_DH_ALUA=m
+CONFIG_SCSI_OSD_INITIATOR=m
+CONFIG_SCSI_OSD_ULD=m
+CONFIG_SCSI_OSD_DPRINT_SENSE=1
+# CONFIG_SCSI_OSD_DEBUG is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
CONFIG_ACCESSIBILITY=y
+# CONFIG_AUXDISPLAY is not set
# CONFIG_STAGING is not set
#
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_EXOFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_FRAME_POINTER is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
CONFIG_SAMPLES=y
# CONFIG_SAMPLE_KOBJECT is not set
# CONFIG_SAMPLE_KPROBES is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
#
# Security options
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_ZLIB=m
CONFIG_CRYPTO_LZO=m
#
# CONFIG_CRYPTO_DES_S390 is not set
# CONFIG_CRYPTO_AES_S390 is not set
CONFIG_S390_PRNG=m
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_CRC32=m
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_NLATTR=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
--- /dev/null
+/*
+ * Copyright IBM Corp. 2000,2009
+ * Author(s): Hartmut Penner <hp@de.ibm.com>,
+ * Martin Schwidefsky <schwidefsky@de.ibm.com>
+ * Christian Ehrhardt <ehrhardt@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_CPUID_H_
+#define _ASM_S390_CPUID_H_
+
+/*
+ * CPU type and hardware bug flags. Kept separately for each CPU.
+ * Members of this structure are referenced in head.S, so think twice
+ * before touching them. [mj]
+ */
+
+typedef struct
+{
+ unsigned int version : 8;
+ unsigned int ident : 24;
+ unsigned int machine : 16;
+ unsigned int unused : 16;
+} __attribute__ ((packed)) cpuid_t;
+
+#endif /* _ASM_S390_CPUID_H_ */
return __div(cputime, 4096000000ULL / USER_HZ);
}
+cputime64_t s390_get_idle_time(int cpu);
+
+#define arch_idle_time(cpu) s390_get_idle_time(cpu)
+
#endif /* _S390_CPUTIME_H */
#define ASM_KVM_HOST_H
#include <linux/kvm_host.h>
#include <asm/debug.h>
+#include <asm/cpuid.h>
#define KVM_MAX_VCPUS 64
#define KVM_MEMORY_SLOTS 32
#define __LC_USER_EXEC_ASCE 0x02ac
#define __LC_CPUID 0x02b0
#define __LC_INT_CLOCK 0x02c8
+#define __LC_MACHINE_FLAGS 0x02d8
#define __LC_IRB 0x0300
#define __LC_PFAULT_INTPARM 0x0080
#define __LC_CPU_TIMER_SAVE_AREA 0x00d8
#define __LC_CPUID 0x0320
#define __LC_INT_CLOCK 0x0340
#define __LC_VDSO_PER_CPU 0x0350
+#define __LC_MACHINE_FLAGS 0x0358
#define __LC_IRB 0x0380
#define __LC_PASTE 0x03c0
#define __LC_PFAULT_INTPARM 0x11b8
#ifndef __ASSEMBLY__
-#include <asm/processor.h>
+#include <asm/cpuid.h>
+#include <asm/ptrace.h>
#include <linux/types.h>
-#include <asm/sigp.h>
void restart_int_handler(void);
void ext_int_handler(void);
__u32 ext_call_fast; /* 0x02c4 */
__u64 int_clock; /* 0x02c8 */
__u64 clock_comparator; /* 0x02d0 */
- __u8 pad_0x02d8[0x0300-0x02d8]; /* 0x02d8 */
+ __u32 machine_flags; /* 0x02d8 */
+ __u8 pad_0x02dc[0x0300-0x02dc]; /* 0x02dc */
/* Interrupt response block */
__u8 irb[64]; /* 0x0300 */
__u64 int_clock; /* 0x0340 */
__u64 clock_comparator; /* 0x0348 */
__u64 vdso_per_cpu_data; /* 0x0350 */
- __u8 pad_0x0358[0x0380-0x0358]; /* 0x0358 */
+ __u64 machine_flags; /* 0x0358 */
+ __u8 pad_0x0360[0x0380-0x0360]; /* 0x0360 */
/* Interrupt response block. */
__u8 irb[64]; /* 0x0380 */
#define __ASM_S390_PROCESSOR_H
#include <linux/linkage.h>
+#include <asm/cpuid.h>
+#include <asm/page.h>
#include <asm/ptrace.h>
+#include <asm/setup.h>
#ifdef __KERNEL__
/*
*/
#define current_text_addr() ({ void *pc; asm("basr %0,0" : "=a" (pc)); pc; })
-/*
- * CPU type and hardware bug flags. Kept separately for each CPU.
- * Members of this structure are referenced in head.S, so think twice
- * before touching them. [mj]
- */
-
-typedef struct
-{
- unsigned int version : 8;
- unsigned int ident : 24;
- unsigned int machine : 16;
- unsigned int unused : 16;
-} __attribute__ ((packed)) cpuid_t;
-
static inline void get_cpu_id(cpuid_t *ptr)
{
asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr));
#ifdef __KERNEL__
-#include <asm/setup.h>
-#include <asm/page.h>
/*
* The pt_regs struct defines the way the registers are stored on
#ifdef __KERNEL__
+#include <asm/lowcore.h>
#include <asm/types.h>
#define PARMAREA 0x10400
/*
* Machine features detected in head.S
*/
-extern unsigned long machine_flags;
#define MACHINE_FLAG_VM (1UL << 0)
#define MACHINE_FLAG_IEEE (1UL << 1)
#define MACHINE_FLAG_HPAGE (1UL << 10)
#define MACHINE_FLAG_PFMF (1UL << 11)
-#define MACHINE_IS_VM (machine_flags & MACHINE_FLAG_VM)
-#define MACHINE_IS_KVM (machine_flags & MACHINE_FLAG_KVM)
-#define MACHINE_HAS_DIAG9C (machine_flags & MACHINE_FLAG_DIAG9C)
+#define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM)
+#define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM)
+#define MACHINE_HAS_DIAG9C (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C)
#ifndef __s390x__
-#define MACHINE_HAS_IEEE (machine_flags & MACHINE_FLAG_IEEE)
-#define MACHINE_HAS_CSP (machine_flags & MACHINE_FLAG_CSP)
+#define MACHINE_HAS_IEEE (S390_lowcore.machine_flags & MACHINE_FLAG_IEEE)
+#define MACHINE_HAS_CSP (S390_lowcore.machine_flags & MACHINE_FLAG_CSP)
#define MACHINE_HAS_IDTE (0)
#define MACHINE_HAS_DIAG44 (1)
-#define MACHINE_HAS_MVPG (machine_flags & MACHINE_FLAG_MVPG)
+#define MACHINE_HAS_MVPG (S390_lowcore.machine_flags & MACHINE_FLAG_MVPG)
#define MACHINE_HAS_MVCOS (0)
#define MACHINE_HAS_HPAGE (0)
#define MACHINE_HAS_PFMF (0)
#else /* __s390x__ */
#define MACHINE_HAS_IEEE (1)
#define MACHINE_HAS_CSP (1)
-#define MACHINE_HAS_IDTE (machine_flags & MACHINE_FLAG_IDTE)
-#define MACHINE_HAS_DIAG44 (machine_flags & MACHINE_FLAG_DIAG44)
+#define MACHINE_HAS_IDTE (S390_lowcore.machine_flags & MACHINE_FLAG_IDTE)
+#define MACHINE_HAS_DIAG44 (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG44)
#define MACHINE_HAS_MVPG (1)
-#define MACHINE_HAS_MVCOS (machine_flags & MACHINE_FLAG_MVCOS)
-#define MACHINE_HAS_HPAGE (machine_flags & MACHINE_FLAG_HPAGE)
-#define MACHINE_HAS_PFMF (machine_flags & MACHINE_FLAG_PFMF)
+#define MACHINE_HAS_MVCOS (S390_lowcore.machine_flags & MACHINE_FLAG_MVCOS)
+#define MACHINE_HAS_HPAGE (S390_lowcore.machine_flags & MACHINE_FLAG_HPAGE)
+#define MACHINE_HAS_PFMF (S390_lowcore.machine_flags & MACHINE_FLAG_PFMF)
#endif /* __s390x__ */
#define ZFCPDUMP_HSA_SIZE (32UL<<20)
#define ASYNC_SIZE (PAGE_SIZE << ASYNC_ORDER)
#ifndef __ASSEMBLY__
-#include <asm/processor.h>
#include <asm/lowcore.h>
+#include <asm/page.h>
+#include <asm/processor.h>
/*
* low level task data that entry.S needs immediate access to
extern void add_virt_timer(void *new);
extern void add_virt_timer_periodic(void *new);
extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
+extern int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires);
extern int del_virt_timer(struct vtimer_list *timer);
extern void init_cpu_vtimer(void);
#ifndef _ASM_S390_TIMEX_H
#define _ASM_S390_TIMEX_H
+/* The value of the TOD clock for 1.1.1970. */
+#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
+
/* Inline functions for clock register access. */
static inline int set_clock(__u64 time)
{
void init_cpu_timer(void);
unsigned long long monotonic_clock(void);
+extern u64 sched_clock_base_cc;
+
#endif
#define __NR_pipe2 325
#define __NR_dup3 326
#define __NR_epoll_create1 327
-#define NR_syscalls 328
+#define __NR_preadv 328
+#define __NR_pwritev 329
+#define NR_syscalls 330
/*
* There are some system calls that are not present on 64 bit, some
DEFINE(__TI_flags, offsetof(struct thread_info, flags));
DEFINE(__TI_cpu, offsetof(struct thread_info, cpu));
DEFINE(__TI_precount, offsetof(struct thread_info, preempt_count));
+ DEFINE(__TI_user_timer, offsetof(struct thread_info, user_timer));
+ DEFINE(__TI_system_timer, offsetof(struct thread_info, system_timer));
BLANK();
DEFINE(__PT_ARGS, offsetof(struct pt_regs, args));
DEFINE(__PT_PSW, offsetof(struct pt_regs, psw));
struct stat64_emu31 __user* statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
+ int error;
- if (!error)
- error = cp_stat64(statbuf, &stat);
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_stat64(statbuf, &stat);
}
/*
llgfr %r5,%r5 # u32
llgfr %r6,%r6 # u32
jg compat_sys_keyctl # branch to system call
+
+ .globl compat_sys_preadv_wrapper
+compat_sys_preadv_wrapper:
+ llgfr %r2,%r2 # unsigned long
+ llgtr %r3,%r3 # compat_iovec *
+ llgfr %r4,%r4 # unsigned long
+ llgfr %r5,%r5 # u32
+ llgfr %r6,%r6 # u32
+ jg compat_sys_preadv # branch to system call
+
+ .globl compat_sys_pwritev_wrapper
+compat_sys_pwritev_wrapper:
+ llgfr %r2,%r2 # unsigned long
+ llgtr %r3,%r3 # compat_iovec *
+ llgfr %r4,%r4 # unsigned long
+ llgfr %r5,%r5 # u32
+ llgfr %r6,%r6 # u32
+ jg compat_sys_pwritev # branch to system call
char kernel_nss_name[NSS_NAME_SIZE + 1];
+static unsigned long machine_flags;
+
static void __init setup_boot_command_line(void);
+/*
+ * Get the TOD clock running.
+ */
+static void __init reset_tod_clock(void)
+{
+ u64 time;
+
+ if (store_clock(&time) == 0)
+ return;
+ /* TOD clock not running. Set the clock to Unix Epoch. */
+ if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
+ disabled_wait(0);
+
+ sched_clock_base_cc = TOD_UNIX_EPOCH;
+}
#ifdef CONFIG_SHARED_KERNEL
int __init savesys_ipl_nss(char *cmd, const int cmdlen);
*/
void __init startup_init(void)
{
+ reset_tod_clock();
ipl_save_parameters();
rescue_initrd();
clear_bss_section();
setup_hpage();
sclp_facilities_detect();
detect_memory_layout(memory_chunk);
+ S390_lowcore.machine_flags = machine_flags;
lockdep_on();
}
__CPUINIT
.globl restart_int_handler
restart_int_handler:
+ basr %r1,0
+restart_base:
+ spt restart_vtime-restart_base(%r1)
+ stck __LC_LAST_UPDATE_CLOCK
+ mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+ mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
l %r15,__LC_SAVE_AREA+60 # load ksp
lctl %c0,%c15,__LC_CREGS_SAVE_AREA # get new ctl regs
lam %a0,%a15,__LC_AREGS_SAVE_AREA
lm %r6,%r15,__SF_GPRS(%r15) # load registers from clone
+ l %r1,__LC_THREAD_INFO
+ mvc __LC_USER_TIMER(8),__TI_user_timer(%r1)
+ mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+ xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
basr %r14,0
l %r14,restart_addr-.(%r14)
br %r14 # branch to start_secondary
restart_addr:
.long start_secondary
+ .align 8
+restart_vtime:
+ .long 0x7fffffff,0xffffffff
.previous
#else
/*
__CPUINIT
.globl restart_int_handler
restart_int_handler:
+ basr %r1,0
+restart_base:
+ spt restart_vtime-restart_base(%r1)
+ stck __LC_LAST_UPDATE_CLOCK
+ mvc __LC_LAST_UPDATE_TIMER(8),restart_vtime-restart_base(%r1)
+ mvc __LC_EXIT_TIMER(8),restart_vtime-restart_base(%r1)
lg %r15,__LC_SAVE_AREA+120 # load ksp
lghi %r10,__LC_CREGS_SAVE_AREA
lctlg %c0,%c15,0(%r10) # get new ctl regs
lghi %r10,__LC_AREGS_SAVE_AREA
lam %a0,%a15,0(%r10)
lmg %r6,%r15,__SF_GPRS(%r15) # load registers from clone
+ lg %r1,__LC_THREAD_INFO
+ mvc __LC_USER_TIMER(8),__TI_user_timer(%r1)
+ mvc __LC_SYSTEM_TIMER(8),__TI_system_timer(%r1)
+ xc __LC_STEAL_TIMER(8),__LC_STEAL_TIMER
stosm __SF_EMPTY(%r15),0x04 # now we can turn dat on
jg start_secondary
+ .align 8
+restart_vtime:
+ .long 0x7fffffff,0xffffffff
.previous
#else
/*
*
*/
+#include <linux/init.h>
#include <asm/setup.h>
#include <asm/lowcore.h>
#include <asm/asm-offsets.h>
#define ARCH_OFFSET 0
#endif
-.section ".text.head","ax"
+__HEAD
#ifndef CONFIG_IPL
.org 0
.long 0x00080000,0x80000000+startup # Just a restart PSW
.LPG0:
xc 0x200(256),0x200 # partially clear lowcore
xc 0x300(256),0x300
-
+ l %r1,5f-.LPG0(%r13)
+ stck 0(%r1)
+ spt 6f-.LPG0(%r13)
+ mvc __LC_LAST_UPDATE_CLOCK(8),0(%r1)
+ mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13)
+ mvc __LC_EXIT_TIMER(8),5f-.LPG0(%r13)
#ifndef CONFIG_MARCH_G5
# check processor version against MARCH_{G5,Z900,Z990,Z9_109,Z10}
stidp __LC_CPUID # store cpuid
brct %r0,0b
#endif
- l %r13,0f-.LPG0(%r13)
+ l %r13,4f-.LPG0(%r13)
b 0(%r13)
-0: .long startup_continue
+ .align 4
+4: .long startup_continue
+5: .long sched_clock_base_cc
+ .align 8
+6: .long 0x7fffffff,0xffffffff
#
# params at 10400 (setup.h)
#include <asm/ebcdic.h>
#include <asm/reset.h>
#include <asm/sclp.h>
+#include <asm/sigp.h>
#include <asm/checksum.h>
#define IPL_PARM_BLOCK_VERSION 0
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/hardirq.h>
#include <linux/time.h>
#include <linux/module.h>
#include <asm/lowcore.h>
struct mci *mci;
int umode;
- lockdep_off();
+ nmi_enter();
s390_idle_check();
mci = (struct mci *) &S390_lowcore.mcck_interruption_code;
mcck->warning = 1;
set_thread_flag(TIF_MCCK_PENDING);
}
- lockdep_on();
+ nmi_exit();
}
static int __init machine_check_init(void)
unsigned int console_irq = -1;
EXPORT_SYMBOL(console_irq);
-unsigned long machine_flags;
-EXPORT_SYMBOL(machine_flags);
-
unsigned long elf_hwcap = 0;
char elf_platform[ELF_PLATFORM_SIZE];
__alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0) + PAGE_SIZE;
lc->current_task = (unsigned long) init_thread_union.thread_info.task;
lc->thread_info = (unsigned long) &init_thread_union;
+ lc->machine_flags = S390_lowcore.machine_flags;
#ifndef CONFIG_64BIT
if (MACHINE_HAS_IEEE) {
lc->extended_save_area_addr = (__u32)
#else
lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0];
#endif
+ lc->sync_enter_timer = S390_lowcore.sync_enter_timer;
+ lc->async_enter_timer = S390_lowcore.async_enter_timer;
+ lc->exit_timer = S390_lowcore.exit_timer;
+ lc->user_timer = S390_lowcore.user_timer;
+ lc->system_timer = S390_lowcore.system_timer;
+ lc->steal_timer = S390_lowcore.steal_timer;
+ lc->last_update_timer = S390_lowcore.last_update_timer;
+ lc->last_update_clock = S390_lowcore.last_update_clock;
set_prefix((u32)(unsigned long) lc);
lowcore_ptr[0] = lc;
}
cpu_lowcore->current_task = (unsigned long) idle;
cpu_lowcore->cpu_nr = cpu;
cpu_lowcore->kernel_asce = S390_lowcore.kernel_asce;
+ cpu_lowcore->machine_flags = S390_lowcore.machine_flags;
eieio();
while (signal_processor(cpu, sigp_restart) == sigp_busy)
int pcpus, cpu;
pcpus = simple_strtoul(s, NULL, 0);
- for (cpu = 0; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
+ init_cpu_possible(cpumask_of(0));
+ for (cpu = 1; cpu < pcpus && cpu < nr_cpu_ids; cpu++)
set_cpu_possible(cpu, true);
return 0;
}
SYSCALL(sys_pipe2,sys_pipe2,sys_pipe2_wrapper) /* 325 */
SYSCALL(sys_dup3,sys_dup3,sys_dup3_wrapper)
SYSCALL(sys_epoll_create1,sys_epoll_create1,sys_epoll_create1_wrapper)
+SYSCALL(sys_preadv,sys_preadv,compat_sys_preadv_wrapper)
+SYSCALL(sys_pwritev,sys_pwritev,compat_sys_pwritev_wrapper)
#define USECS_PER_JIFFY ((unsigned long) 1000000/HZ)
#define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
-/* The value of the TOD clock for 1.1.1970. */
-#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
-
/*
* Create a small time difference between the timer interrupts
* on the different cpus to avoid lock contention.
#define TICK_SIZE tick
+u64 sched_clock_base_cc = -1; /* Force to data section. */
+
static ext_int_info_t ext_int_info_cc;
static ext_int_info_t ext_int_etr_cc;
-static u64 sched_clock_base_cc;
static DEFINE_PER_CPU(struct clock_event_device, comparators);
static void etr_reset(void);
static void stp_reset(void);
-/*
- * Get the TOD clock running.
- */
-static u64 __init reset_tod_clock(void)
+unsigned long read_persistent_clock(void)
{
- u64 time;
-
- etr_reset();
- stp_reset();
- if (store_clock(&time) == 0)
- return time;
- /* TOD clock not running. Set the clock to Unix Epoch. */
- if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
- panic("TOD clock not operational.");
+ struct timespec ts;
- return TOD_UNIX_EPOCH;
+ tod_to_timeval(get_clock() - TOD_UNIX_EPOCH, &ts);
+ return ts.tv_sec;
}
-static cycle_t read_tod_clock(void)
+static cycle_t read_tod_clock(struct clocksource *cs)
{
return get_clock();
}
*/
void __init time_init(void)
{
- sched_clock_base_cc = reset_tod_clock();
+ struct timespec ts;
+ unsigned long flags;
+ cycle_t now;
- /* set xtime */
- tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &xtime);
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
+ /* Reset time synchronization interfaces. */
+ etr_reset();
+ stp_reset();
/* request the clock comparator external interrupt */
if (register_early_external_interrupt(0x1004,
&ext_int_info_cc) != 0)
panic("Couldn't request external interrupt 0x1004");
- if (clocksource_register(&clocksource_tod) != 0)
- panic("Could not register TOD clock source");
-
/* request the timing alert external interrupt */
if (register_early_external_interrupt(0x1406,
timing_alert_interrupt,
&ext_int_etr_cc) != 0)
panic("Couldn't request external interrupt 0x1406");
+ if (clocksource_register(&clocksource_tod) != 0)
+ panic("Could not register TOD clock source");
+
+ /*
+ * The TOD clock is an accurate clock. The xtime should be
+ * initialized in a way that the difference between TOD and
+ * xtime is reasonably small. Too bad that timekeeping_init
+ * sets xtime.tv_nsec to zero. In addition the clock source
+ * change from the jiffies clock source to the TOD clock
+ * source add another error of up to 1/HZ second. The same
+ * function sets wall_to_monotonic to a value that is too
+ * small for /proc/uptime to be accurate.
+ * Reset xtime and wall_to_monotonic to sane values.
+ */
+ write_seqlock_irqsave(&xtime_lock, flags);
+ now = get_clock();
+ tod_to_timeval(now - TOD_UNIX_EPOCH, &xtime);
+ clocksource_tod.cycle_last = now;
+ clocksource_tod.raw_time = xtime;
+ tod_to_timeval(sched_clock_base_cc - TOD_UNIX_EPOCH, &ts);
+ set_normalized_timespec(&wall_to_monotonic, -ts.tv_sec, -ts.tv_nsec);
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+
/* Enable TOD clock interrupts on the boot cpu. */
init_cpu_timer();
+
/* Enable cpu timer interrupts on the boot cpu. */
vtime_init();
}
static void stp_work_fn(struct work_struct *work);
static DEFINE_MUTEX(stp_work_mutex);
static DECLARE_WORK(stp_work, stp_work_fn);
+static struct timer_list stp_timer;
static int __init early_parse_stp(char *p)
{
}
}
+static void stp_timeout(unsigned long dummy)
+{
+ queue_work(time_sync_wq, &stp_work);
+}
+
static int __init stp_init(void)
{
if (!test_bit(CLOCK_SYNC_HAS_STP, &clock_sync_flags))
return 0;
+ setup_timer(&stp_timer, stp_timeout, 0UL);
time_init_wq();
if (!stp_online)
return 0;
if (!stp_online) {
chsc_sstpc(stp_page, STP_OP_CTRL, 0x0000);
+ del_timer_sync(&stp_timer);
goto out_unlock;
}
stop_machine(stp_sync_clock, &stp_sync, &cpu_online_map);
put_online_cpus();
+ if (!check_sync_clock())
+ /*
+ * There is a usable clock but the synchonization failed.
+ * Retry after a second.
+ */
+ mod_timer(&stp_timer, jiffies + HZ);
+
out_unlock:
mutex_unlock(&stp_work_mutex);
}
. = 0x00000000;
.text : {
_text = .; /* Text and read-only data */
- *(.text.head)
- TEXT_TEXT
+ HEAD_TEXT
+ TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
KPROBES_TEXT
/* Account time spent with enabled wait psw loaded as idle time. */
idle_time = S390_lowcore.int_clock - idle->idle_enter;
account_idle_time(idle_time);
+ S390_lowcore.steal_timer +=
+ idle->idle_enter - S390_lowcore.last_update_clock;
S390_lowcore.last_update_clock = S390_lowcore.int_clock;
/* Account system time spent going idle. */
}
}
+cputime64_t s390_get_idle_time(int cpu)
+{
+ struct s390_idle_data *idle;
+ unsigned long long now, idle_time, idle_enter;
+
+ idle = &per_cpu(s390_idle, cpu);
+ spin_lock(&idle->lock);
+ now = get_clock();
+ idle_time = 0;
+ idle_enter = idle->idle_enter;
+ if (idle_enter != 0ULL && idle_enter < now)
+ idle_time = now - idle_enter;
+ spin_unlock(&idle->lock);
+ return idle_time;
+}
+
/*
* Sorted add to a list. List is linear searched until first bigger
* element is found.
}
EXPORT_SYMBOL(add_virt_timer_periodic);
-/*
- * If we change a pending timer the function must be called on the CPU
- * where the timer is running on, e.g. by smp_call_function_single()
- *
- * The original mod_timer adds the timer if it is not pending. For
- * compatibility we do the same. The timer will be added on the current
- * CPU as a oneshot timer.
- *
- * returns whether it has modified a pending timer (1) or not (0)
- */
-int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+int __mod_vtimer(struct vtimer_list *timer, __u64 expires, int periodic)
{
struct vtimer_queue *vq;
unsigned long flags;
BUG_ON(!timer->function);
BUG_ON(!expires || expires > VTIMER_MAX_SLICE);
- /*
- * This is a common optimization triggered by the
- * networking code - if the timer is re-modified
- * to be the same thing then just return:
- */
if (timer->expires == expires && vtimer_pending(timer))
return 1;
cpu = get_cpu();
vq = &per_cpu(virt_cpu_timer, cpu);
- /* check if we run on the right CPU */
- BUG_ON(timer->cpu != cpu);
-
/* disable interrupts before test if timer is pending */
spin_lock_irqsave(&vq->lock, flags);
/* if timer isn't pending add it on the current CPU */
if (!vtimer_pending(timer)) {
spin_unlock_irqrestore(&vq->lock, flags);
- /* we do not activate an interval timer with mod_virt_timer */
- timer->interval = 0;
+
+ if (periodic)
+ timer->interval = expires;
+ else
+ timer->interval = 0;
timer->expires = expires;
timer->cpu = cpu;
internal_add_vtimer(timer);
return 0;
}
+ /* check if we run on the right CPU */
+ BUG_ON(timer->cpu != cpu);
+
list_del_init(&timer->entry);
timer->expires = expires;
-
- /* also change the interval if we have an interval timer */
- if (timer->interval)
+ if (periodic)
timer->interval = expires;
/* the timer can't expire anymore so we can release the lock */
internal_add_vtimer(timer);
return 1;
}
+
+/*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer(struct vtimer_list *timer, __u64 expires)
+{
+ return __mod_vtimer(timer, expires, 0);
+}
EXPORT_SYMBOL(mod_virt_timer);
+/*
+ * If we change a pending timer the function must be called on the CPU
+ * where the timer is running on.
+ *
+ * returns whether it has modified a pending timer (1) or not (0)
+ */
+int mod_virt_timer_periodic(struct vtimer_list *timer, __u64 expires)
+{
+ return __mod_vtimer(timer, expires, 1);
+}
+EXPORT_SYMBOL(mod_virt_timer_periodic);
+
/*
* delete a virtual timer
*
*/
void init_cpu_vtimer(void)
{
- struct thread_info *ti = current_thread_info();
struct vtimer_queue *vq;
- S390_lowcore.user_timer = ti->user_timer;
- S390_lowcore.system_timer = ti->system_timer;
-
- /* kick the virtual timer */
- asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
- asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer));
-
/* initialize per cpu vtimer structure */
vq = &__get_cpu_var(virt_cpu_timer);
INIT_LIST_HEAD(&vq->list);
select HAVE_GENERIC_DMA_COHERENT
select HAVE_IOREMAP_PROT if MMU
select HAVE_ARCH_TRACEHOOK
+ select HAVE_DMA_API_DEBUG
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
<http://www.linux-sh.org/>.
config SUPERH32
- def_bool !SUPERH64
+ def_bool ARCH = "sh"
select HAVE_KPROBES
select HAVE_KRETPROBES
select HAVE_FUNCTION_TRACER
select ARCH_HIBERNATION_POSSIBLE if MMU
config SUPERH64
- def_bool y if CPU_SH5
+ def_bool ARCH = "sh64"
config ARCH_DEFCONFIG
string
bool
select ARCH_SUSPEND_POSSIBLE
+if SUPERH32
+
choice
prompt "Processor sub-type selection"
select SYS_SUPPORTS_NUMA
select SYS_SUPPORTS_CMT
+endchoice
+
+endif
+
+if SUPERH64
+
+choice
+ prompt "Processor sub-type selection"
+
# SH-5 Processor Support
config CPU_SUBTYPE_SH5_101
endchoice
+endif
+
source "arch/sh/mm/Kconfig"
source "arch/sh/Kconfig.cpu"
static struct ov772x_camera_info ov7725_info = {
.buswidth = SOCAM_DATAWIDTH_8,
.flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP,
+ .edgectrl = OV772X_AUTO_EDGECTRL(0xf, 0),
.link = {
.power = ov7725_power,
},
* Renesas Technology Corp. SH7786 Urquell Support.
*
* Copyright (C) 2008 Kuninori Morimoto <morimoto.kuninori@renesas.com>
+ *
+ * Based on board-sh7785lcr.c
* Copyright (C) 2008 Yoshihiro Shimoda
*
* This file is subject to the terms and conditions of the GNU General Public
#include <asm/heartbeat.h>
#include <asm/sizes.h>
+/*
+ * bit 1234 5678
+ *----------------------------
+ * SW1 0101 0010 -> Pck 33MHz version
+ * (1101 0010) Pck 66MHz version
+ * SW2 0x1x xxxx -> little endian
+ * 29bit mode
+ * SW47 0001 1000 -> CS0 : on-board flash
+ * CS1 : SRAM, registers, LAN, PCMCIA
+ * 38400 bps for SCIF1
+ *
+ * Address
+ * 0x00000000 - 0x04000000 (CS0) Nor Flash
+ * 0x04000000 - 0x04200000 (CS1) SRAM
+ * 0x05000000 - 0x05800000 (CS1) on board register
+ * 0x05800000 - 0x06000000 (CS1) LAN91C111
+ * 0x06000000 - 0x06400000 (CS1) PCMCIA
+ * 0x08000000 - 0x10000000 (CS2-CS3) DDR3
+ * 0x10000000 - 0x14000000 (CS4) PCIe
+ * 0x14000000 - 0x14800000 (CS5) Core0 LRAM/URAM
+ * 0x14800000 - 0x15000000 (CS5) Core1 LRAM/URAM
+ * 0x18000000 - 0x1C000000 (CS6) ATA/NAND-Flash
+ * 0x1C000000 - (CS7) SH7786 Control register
+ */
+
+/* HeartBeat */
static struct resource heartbeat_resources[] = {
[0] = {
.start = BOARDREG(SLEDR),
.resource = heartbeat_resources,
};
+/* LAN91C111 */
static struct smc91x_platdata smc91x_info = {
.flags = SMC91X_USE_16BIT | SMC91X_NOWAIT,
};
},
};
+/* Nor Flash */
static struct mtd_partition nor_flash_partitions[] = {
{
.name = "loader",
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Thu Apr 2 19:15:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 22 19:17:56 2009
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
+# CONFIG_SUPERH64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig"
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
# CONFIG_OPROFILE is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7724 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
# CONFIG_CPU_SUBTYPE_SH7366 is not set
-# CONFIG_CPU_SUBTYPE_SH5_101 is not set
-# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000
-# CONFIG_29BIT is not set
-CONFIG_32BIT=y
-CONFIG_PMB_ENABLE=y
-# CONFIG_PMB is not set
-CONFIG_PMB_FIXED=y
+CONFIG_29BIT=y
+# CONFIG_PMB_ENABLE is not set
# CONFIG_X2TLB is not set
CONFIG_VSYSCALL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_MAX_ACTIVE_REGIONS=2
+CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_16KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_ENTRY_OFFSET=0x00001000
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
-# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=2
#
# CONFIG_SH_HIGHLANDER is not set
CONFIG_SH_SH7785LCR=y
+CONFIG_SH_SH7785LCR_29BIT_PHYSMAPS=y
#
# Timer and clock configuration
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
static struct sh4_pci_address_map sh7785_pci_map = {
.window0 = {
+#if defined(CONFIG_32BIT)
+ .base = SH7780_32BIT_DDR_BASE_ADDR,
+ .size = 0x40000000,
+#else
.base = SH7780_CS0_BASE_ADDR,
.size = 0x20000000,
+#endif
},
.flags = SH4_PCIC_NO_RESET,
#define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE)
#define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE)
+#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000
+
struct sh4_pci_address_map;
/* arch/sh/drivers/pci/pci-sh7780.c */
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/init.h>
+#include <linux/dma-debug.h>
#include <asm/io.h>
static int __init pcibios_init(void)
pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq);
+ dma_debug_add_bus(&pci_bus_type);
+
return 0;
}
subsys_initcall(pcibios_init);
#include <linux/mm.h>
#include <linux/scatterlist.h>
+#include <linux/dma-debug.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include <asm-generic/dma-coherent.h>
void *ptr, size_t size,
enum dma_data_direction dir)
{
+ dma_addr_t addr = virt_to_phys(ptr);
+
#if defined(CONFIG_PCI) && !defined(CONFIG_SH_PCIDMA_NONCOHERENT)
if (dev->bus == &pci_bus_type)
- return virt_to_phys(ptr);
+ return addr;
#endif
dma_cache_sync(dev, ptr, size, dir);
- return virt_to_phys(ptr);
+ debug_dma_map_page(dev, virt_to_page(ptr),
+ (unsigned long)ptr & ~PAGE_MASK, size,
+ dir, addr, true);
+
+ return addr;
}
-#define dma_unmap_single(dev, addr, size, dir) do { } while (0)
+static inline void dma_unmap_single(struct device *dev, dma_addr_t addr,
+ size_t size, enum dma_data_direction dir)
+{
+ debug_dma_unmap_page(dev, addr, size, dir, true);
+}
static inline int dma_map_sg(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction dir)
dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
#endif
sg[i].dma_address = sg_phys(&sg[i]);
+ sg[i].dma_length = sg[i].length;
}
+ debug_dma_map_sg(dev, sg, nents, i, dir);
+
return nents;
}
-#define dma_unmap_sg(dev, sg, nents, dir) do { } while (0)
+static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir)
+{
+ debug_dma_unmap_sg(dev, sg, nents, dir);
+}
static inline dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
dma_cache_sync(dev, sg_virt(&sg[i]), sg[i].length, dir);
#endif
sg[i].dma_address = sg_phys(&sg[i]);
+ sg[i].dma_length = sg[i].length;
}
}
enum dma_data_direction dir)
{
dma_sync_single(dev, dma_handle, size, dir);
+ debug_dma_sync_single_for_cpu(dev, dma_handle, size, dir);
}
static inline void dma_sync_single_for_device(struct device *dev,
enum dma_data_direction dir)
{
dma_sync_single(dev, dma_handle, size, dir);
+ debug_dma_sync_single_for_device(dev, dma_handle, size, dir);
}
static inline void dma_sync_single_range_for_cpu(struct device *dev,
enum dma_data_direction direction)
{
dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction);
+ debug_dma_sync_single_range_for_cpu(dev, dma_handle,
+ offset, size, direction);
}
static inline void dma_sync_single_range_for_device(struct device *dev,
enum dma_data_direction direction)
{
dma_sync_single_for_device(dev, dma_handle+offset, size, direction);
+ debug_dma_sync_single_range_for_device(dev, dma_handle,
+ offset, size, direction);
}
enum dma_data_direction dir)
{
dma_sync_sg(dev, sg, nelems, dir);
+ debug_dma_sync_sg_for_cpu(dev, sg, nelems, dir);
}
static inline void dma_sync_sg_for_device(struct device *dev,
enum dma_data_direction dir)
{
dma_sync_sg(dev, sg, nelems, dir);
+ debug_dma_sync_sg_for_device(dev, sg, nelems, dir);
}
-
static inline int dma_get_cache_alignment(void)
{
/*
struct pt_regs {
unsigned long long pc;
unsigned long long sr;
- unsigned long long syscall_nr;
+ long long syscall_nr;
unsigned long long regs[63];
unsigned long long tregs[8];
unsigned long long pad[2];
struct scatterlist {
#ifdef CONFIG_DEBUG_SG
- unsigned long sg_magic;
+ unsigned long sg_magic;
#endif
- unsigned long page_link;
- unsigned int offset;/* for highmem, page offset */
- dma_addr_t dma_address;
- unsigned int length;
+ unsigned long page_link;
+ unsigned int offset; /* for highmem, page offset */
+ unsigned int length;
+ dma_addr_t dma_address;
+ unsigned int dma_length;
};
#define ISA_DMA_THRESHOLD PHYS_ADDR_MASK
#define pcibus_to_node(bus) ((void)(bus), -1)
#define pcibus_to_cpumask(bus) (pcibus_to_node(bus) == -1 ? \
CPU_MASK_ALL : \
- node_to_cpumask(pcibus_to_node(bus)) \
- )
+ node_to_cpumask(pcibus_to_node(bus)))
+#define cpumask_of_pcibus(bus) (pcibus_to_node(bus) == -1 ? \
+ CPU_MASK_ALL_PTR : \
+ cpumask_of_node(pcibus_to_node(bus)))
+
#endif
#include <asm-generic/topology.h>
#define __NR_dup3 330
#define __NR_pipe2 331
#define __NR_inotify_init1 332
+#define __NR_preadv 333
+#define __NR_pwritev 334
-#define NR_syscalls 333
+#define NR_syscalls 335
#ifdef __KERNEL__
#define __NR_dup3 358
#define __NR_pipe2 359
#define __NR_inotify_init1 360
+#define __NR_preadv 361
+#define __NR_pwritev 362
#ifdef __KERNEL__
-#define NR_syscalls 361
+#define NR_syscalls 363
#define __ARCH_WANT_IPC_PARSE_VERSION
#define __ARCH_WANT_OLD_READDIR
{
clk_always_enable("uram0"); /* URAM */
clk_always_enable("xymem0"); /* XYMEM */
- clk_always_enable("rtc0"); /* RTC */
clk_always_enable("veu0"); /* VEU */
clk_always_enable("vpu0"); /* VPU */
clk_always_enable("jpu0"); /* JPU */
static int __init sh7723_devices_setup(void)
{
clk_always_enable("meram0"); /* MERAM */
- clk_always_enable("rtc0"); /* RTC */
clk_always_enable("veu1"); /* VEU2H1 */
clk_always_enable("veu0"); /* VEU2H0 */
clk_always_enable("vpu0"); /* VPU */
* Set the PHY and PLL enable bit
*/
__raw_writel(PHY_ENB | PLL_ENB, USBPCTL1);
- while (i-- &&
- ((__raw_readl(USBST) & ACT_PLL_STATUS) != ACT_PLL_STATUS))
+ while (i--) {
+ if (ACT_PLL_STATUS == (__raw_readl(USBST) & ACT_PLL_STATUS)) {
+ /* Set the PHY RST bit */
+ __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
+ printk(KERN_INFO "sh7786 usb setup done\n");
+ break;
+ }
cpu_relax();
-
- if (i) {
- /* Set the PHY RST bit */
- __raw_writel(PHY_ENB | PLL_ENB | PHY_RST, USBPCTL1);
- printk(KERN_INFO "sh7786 usb setup done\n");
}
}
* for more details.
*/
#include <linux/errno.h>
+#include <linux/init.h>
#include <linux/sys.h>
#include <cpu/registers.h>
#include <asm/processor.h>
/*
- * --- .text.init Section
+ * --- .init.text Section
*/
- .section .text.init, "ax"
+ __INIT
/*
* void trap_init (void)
*
* Head.S contains the SH exception handlers and startup code.
*/
+#include <linux/init.h>
#include <linux/linkage.h>
#include <asm/thread_info.h>
1:
.skip PAGE_SIZE - empty_zero_page - 1b
- .section .text.head, "ax"
+ __HEAD
/*
* Condition at the entry of _stext:
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+
+#include <linux/init.h>
+
#include <asm/page.h>
#include <asm/cache.h>
#include <asm/tlb.h>
fpu_in_use: .quad 0
- .section .text.head, "ax"
+ __HEAD
.balign L1_CACHE_BYTES
/*
* Condition at the entry of __stext:
unsigned long prot, unsigned long flags,
unsigned long fd, unsigned long pgoff)
{
+ /*
+ * The shift for mmap2 is constant, regardless of PAGE_SIZE
+ * setting.
+ */
+ if (pgoff & ((1 << (PAGE_SHIFT - 12)) - 1))
+ return -EINVAL;
+
+ pgoff >>= PAGE_SHIFT - 12;
+
return do_mmap2(addr, len, prot, flags, fd, pgoff);
}
.long sys_dup3 /* 330 */
.long sys_pipe2
.long sys_inotify_init1
+ .long sys_preadv
+ .long sys_writev
.long sys_dup3
.long sys_pipe2
.long sys_inotify_init1 /* 360 */
+ .long sys_preadv
+ .long sys_pwritev
if (!clocksource_sh.rating)
return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
- cycles = clocksource_sh.read();
+ cycles = clocksource_sh.read(&clocksource_sh);
return cyc2ns(&clocksource_sh, cycles);
}
#endif
*/
static int tmus_are_scaled;
-static cycle_t tmu_timer_read(void)
+static cycle_t tmu_timer_read(struct clocksource *cs)
{
return ((cycle_t)(~_tmu_read(TMU1)))<<tmus_are_scaled;
}
} = 0
.text : {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
} = 0
.text : C_PHYS(.text) {
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
*(.text64)
*(.text..SHmedia32)
* for more details.
*/
#include <linux/mm.h>
+#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/dma-debug.h>
+#include <linux/io.h>
#include <asm/cacheflush.h>
#include <asm/addrspace.h>
-#include <asm/io.h>
+
+#define PREALLOC_DMA_DEBUG_ENTRIES 4096
+
+static int __init dma_init(void)
+{
+ dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
+ return 0;
+}
+fs_initcall(dma_init);
void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, gfp_t gfp)
split_page(pfn_to_page(virt_to_phys(ret) >> PAGE_SHIFT), order);
*dma_handle = virt_to_phys(ret);
+
+ debug_dma_alloc_coherent(dev, size, *dma_handle, ret_nocache);
+
return ret_nocache;
}
EXPORT_SYMBOL(dma_alloc_coherent);
unsigned long pfn = dma_handle >> PAGE_SHIFT;
int k;
- if (!dma_release_from_coherent(dev, order, vaddr)) {
- WARN_ON(irqs_disabled()); /* for portability */
- for (k = 0; k < (1 << order); k++)
- __free_pages(pfn_to_page(pfn + k), 0);
- iounmap(vaddr);
- }
+ WARN_ON(irqs_disabled()); /* for portability */
+
+ if (dma_release_from_coherent(dev, order, vaddr))
+ return;
+
+ debug_dma_free_coherent(dev, size, vaddr, dma_handle);
+ for (k = 0; k < (1 << order); k++)
+ __free_pages(pfn_to_page(pfn + k), 0);
+ iounmap(vaddr);
}
EXPORT_SYMBOL(dma_free_coherent);
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Thu Jan 8 16:45:44 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 04:04:46 2009
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_SUN_PM=y
# CONFIG_SPARC_LED is not set
CONFIG_SERIAL_CONSOLE=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC32_PCI=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
CONFIG_SCSI_SUNESP=y
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_E1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Jan 2 18:14:26 2009
+# Linux kernel version: 2.6.30-rc2
+# Fri Apr 17 02:03:07 2009
#
+CONFIG_64BIT=y
CONFIG_SPARC=y
+# CONFIG_SPARC32 is not set
CONFIG_SPARC64=y
CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc64_defconfig"
CONFIG_BITS=64
-CONFIG_64BIT=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
CONFIG_ARCH_NO_VIRT_TO_BUS=y
CONFIG_OF=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_OPROFILE=m
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
+CONFIG_HAVE_SYSCALL_WRAPPERS=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
-CONFIG_RESOURCES_64BIT=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=0
CONFIG_NR_QUICK=1
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_SUN_OPENPROMFS=m
CONFIG_SPARC64_PCI=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
-CONFIG_IP_DCCP=m
-CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
-
-#
-# DCCP CCIDs Configuration (EXPERIMENTAL)
-#
-CONFIG_IP_DCCP_CCID2=m
-# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
-# CONFIG_IP_DCCP_CCID3_DEBUG is not set
-CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
-
-#
-# DCCP Kernel Hacking
-#
-# CONFIG_IP_DCCP_DEBUG is not set
-# CONFIG_NET_DCCPPROBE is not set
+# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
CONFIG_NET_PKTGEN=m
CONFIG_NET_TCPPROBE=m
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
# CONFIG_WIRELESS_EXT is not set
# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_SUNESP is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
-# CONFIG_MD_RAID5_RESHAPE is not set
+CONFIG_MD_RAID6_PQ=m
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-# CONFIG_SUNLANCE is not set
-# CONFIG_HAPPYMEAL is not set
+CONFIG_SUNLANCE=m
+CONFIG_HAPPYMEAL=m
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
-# CONFIG_SUNGEM is not set
-CONFIG_CASSINI=m
+CONFIG_SUNGEM=m
+# CONFIG_CASSINI is not set
CONFIG_SUNVNET=m
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
-# CONFIG_E1000E is not set
+CONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NIU=m
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_N2RNG=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
#
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
CONFIG_RTC_DRV_SUN4V=y
CONFIG_RTC_DRV_STARFIRE=y
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
# CONFIG_NFS_FS is not set
# CONFIG_NFSD is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
#
# Security options
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
CONFIG_CRYPTO_TEST=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_T10DIF is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#ifdef __KERNEL__
+#include <asm/system.h>
+
#define ATOMIC_INIT(i) { (i) }
extern int __atomic_add_return(int, atomic_t *);
if (!strcmp(parent->name, "dma")) {
p = parport_pc_probe_port(base, base + 0x400,
op->irqs[0], PARPORT_DMA_NOFIFO,
- op->dev.parent->parent);
+ op->dev.parent->parent, 0);
if (!p)
return -ENOMEM;
dev_set_drvdata(&op->dev, p);
p = parport_pc_probe_port(base, base + 0x400,
op->irqs[0],
slot,
- op->dev.parent);
+ op->dev.parent,
+ 0);
err = -ENOMEM;
if (!p)
goto out_disable_irq;
.align 4
/* The Sparc trap table, bootloader gives us control at _start. */
- .section .text.head,"ax"
+ __HEAD
.globl start, _stext, _start, __stext
.globl trapbase
_start: /* danger danger */
nop
/* The code above should be at beginning and we have to take care about
- * short jumps, as branching to .text.init section from .text is usually
+ * short jumps, as branching to .init.text section from .text is usually
* impossible */
__INIT
/* Acquire boot time privileged register values, this will help debugging.
jmpl %g2 + %g0, %g0
nop
- .section .text.init.refok
+ __REF
sun4u_init:
BRANCH_IF_SUN4V(g1, sun4v_init)
free_queue(lp->tx_num_entries, lp->tx_base);
out_free_mssbuf:
- if (mssbuf)
- kfree(mssbuf);
+ kfree(mssbuf);
out_free_iommu:
ldc_iommu_release(lp);
hlist_del(&lp->list);
- if (lp->mssbuf)
- kfree(lp->mssbuf);
+ kfree(lp->mssbuf);
ldc_iommu_release(lp);
static int of_bus_sbus_match(struct device_node *np)
{
- return !strcmp(np->name, "sbus") ||
- !strcmp(np->name, "sbi");
+ struct device_node *dp = np;
+
+ while (dp) {
+ if (!strcmp(dp->name, "sbus") ||
+ !strcmp(dp->name, "sbi"))
+ return 1;
+
+ /* Have a look at use_1to1_mapping(). We're trying
+ * to match SBUS if that's the top-level bus and we
+ * don't have some intervening real bus that provides
+ * ranges based translations.
+ */
+ if (of_find_property(dp, "ranges", NULL) != NULL)
+ break;
+
+ dp = dp->parent;
+ }
+
+ return 0;
}
static void of_bus_sbus_count_cells(struct device_node *child,
static int of_bus_sbus_match(struct device_node *np)
{
- return !strcmp(np->name, "sbus") ||
- !strcmp(np->name, "sbi");
+ struct device_node *dp = np;
+
+ while (dp) {
+ if (!strcmp(dp->name, "sbus") ||
+ !strcmp(dp->name, "sbi"))
+ return 1;
+
+ /* Have a look at use_1to1_mapping(). We're trying
+ * to match SBUS if that's the top-level bus and we
+ * don't have some intervening real bus that provides
+ * ranges based translations.
+ */
+ if (of_find_property(dp, "ranges", NULL) != NULL)
+ break;
+
+ dp = dp->parent;
+ }
+
+ return 0;
}
static void of_bus_sbus_count_cells(struct device_node *child,
while (!cpu_isset(cpuid, smp_commenced_mask))
rmb();
- ipi_call_lock();
+ ipi_call_lock_irq();
cpu_set(cpuid, cpu_online_map);
- ipi_call_unlock();
+ ipi_call_unlock_irq();
/* idle thread is expected to have preempt disabled */
preempt_disable();
struct compat_stat64 __user * statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_compat_stat64(&stat, statbuf);
+ int error;
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_compat_stat64(&stat, statbuf);
}
asmlinkage long compat_sys_sysfs(int option, u32 arg1, u32 arg2)
}
EXPORT_SYMBOL(udelay);
+static cycle_t clocksource_tick_read(struct clocksource *cs)
+{
+ return tick_ops->get_tick();
+}
+
void __init time_init(void)
{
unsigned long freq = sparc64_init_timers();
clocksource_tick.mult =
clocksource_hz2mult(freq,
clocksource_tick.shift);
- clocksource_tick.read = tick_ops->get_tick;
+ clocksource_tick.read = clocksource_tick_read;
printk("clocksource: mult[%x] shift[%d]\n",
clocksource_tick.mult, clocksource_tick.shift);
.text TEXTSTART :
{
_text = .;
- *(.text.head)
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
#This is just to shut up some Kconfig warnings, so no prompt.
config INPUT
- bool
+ tristate
default n
source "arch/um/Kconfig.debug"
return IRQ_HANDLED;
}
-static cycle_t itimer_read(void)
+static cycle_t itimer_read(struct clocksource *cs)
{
return os_nsecs() / 1000;
}
config NUMA_MIGRATE_IRQ_DESC
bool "Move irq desc when changing irq smp_affinity"
depends on SPARSE_IRQ && NUMA
+ depends on BROKEN
default n
---help---
This enables moving irq_desc to cpu/node that irq will use handled.
bool "SGI Ultraviolet"
depends on X86_64
depends on X86_EXTENDED_PLATFORM
+ depends on NUMA
select X86_X2APIC
---help---
This option is needed in order to support SGI Ultraviolet systems.
config NR_CPUS
int "Maximum number of CPUs" if SMP && !MAXSMP
+ range 2 8 if SMP && X86_32 && !X86_BIGSMP
range 2 512 if SMP && !MAXSMP
default "1" if !SMP
default "4096" if MAXSMP
bool "Branch Trace Store"
default y
depends on X86_DEBUGCTLMSR
+ depends on BROKEN
---help---
This adds a ptrace interface to the hardware's branch trace store.
boot := arch/x86/boot
-BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install
+BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage
PHONY += bzImage $(BOOT_TARGETS)
$(BOOT_TARGETS): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $@
+PHONY += install
+install:
+ $(Q)$(MAKE) $(build)=$(boot) $@
+
PHONY += vdso_install
vdso_install:
$(Q)$(MAKE) $(build)=arch/x86/vdso $@
struct stat64 __user *statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
+ int error;
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_stat64(statbuf, &stat);
-
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_stat64(statbuf, &stat);
}
/*
struct gdt_page {
struct desc_struct gdt[GDT_ENTRIES];
} __attribute__((aligned(PAGE_SIZE)));
-DECLARE_PER_CPU(struct gdt_page, gdt_page);
+DECLARE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page);
static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
{
#endif
} ____cacheline_aligned irq_cpustat_t;
-DECLARE_PER_CPU(irq_cpustat_t, irq_stat);
+DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat);
/* We can have at most NR_VECTORS irqs routed to a cpu at a time */
#define MAX_HARDIRQS_PER_CPU NR_VECTORS
#define LHCALL_FLUSH_ASYNC 0
#define LHCALL_LGUEST_INIT 1
#define LHCALL_SHUTDOWN 2
-#define LHCALL_LOAD_GDT 3
#define LHCALL_NEW_PGTABLE 4
#define LHCALL_FLUSH_TLB 5
#define LHCALL_LOAD_IDT_ENTRY 6
#define LHCALL_SET_PMD 15
#define LHCALL_LOAD_TLS 16
#define LHCALL_NOTIFY 17
+#define LHCALL_LOAD_GDT_ENTRY 18
#define LGUEST_TRAP_ENTRY 0x1F
enum mcp_flags {
MCP_TIMESTAMP = (1 << 0), /* log time stamp */
MCP_UC = (1 << 1), /* log uncorrected errors */
+ MCP_DONTLOG = (1 << 2), /* only clear, don't log */
};
extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
extern int kernel_map_sync_memtype(u64 base, unsigned long size,
unsigned long flag);
-extern void map_devmem(unsigned long pfn, unsigned long size,
- struct pgprot vma_prot);
-extern void unmap_devmem(unsigned long pfn, unsigned long size,
- struct pgprot vma_prot);
#endif /* _ASM_X86_PAT_H */
extern __u32 cleared_cpu_caps[NCAPINTS];
#ifdef CONFIG_SMP
-DECLARE_PER_CPU(struct cpuinfo_x86, cpu_info);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
#define cpu_data(cpu) per_cpu(cpu_info, cpu)
#define current_cpu_data __get_cpu_var(cpu_info)
#else
} ____cacheline_aligned;
-DECLARE_PER_CPU(struct tss_struct, init_tss);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss);
/*
* Save the original ist values for checking stack pointers during debugging
};
};
-DECLARE_PER_CPU(union irq_stack_union, irq_stack_union);
+DECLARE_PER_CPU_FIRST(union irq_stack_union, irq_stack_union);
DECLARE_INIT_PER_CPU(irq_stack_union);
DECLARE_PER_CPU(char *, irq_stack_ptr);
#ifdef CONFIG_X86_64
#define NEED_PSE 0
#define NEED_MSR (1<<(X86_FEATURE_MSR & 31))
-#define NEED_PGE (1<<(X86_FEATURE_PGE & 31))
+#define NEED_PGE 0
#define NEED_FXSR (1<<(X86_FEATURE_FXSR & 31))
#define NEED_XMM (1<<(X86_FEATURE_XMM & 31))
#define NEED_XMM2 (1<<(X86_FEATURE_XMM2 & 31))
struct mm_struct *active_mm;
int state;
};
-DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
static inline void reset_lazy_tlbstate(void)
{
}
struct pci_bus;
-void set_pci_bus_resources_arch_default(struct pci_bus *b);
+void x86_pci_root_bus_res_quirks(struct pci_bus *b);
#ifdef CONFIG_SMP
#define mc_capable() (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids)
/* ========================================================================= */
/* UVH_BAU_DATA_CONFIG */
/* ========================================================================= */
+#define UVH_LB_BAU_MISC_CONTROL 0x320170UL
+#define UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT 15
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT 16
+#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD 0x000000000bUL
+/* 1011 timebase 7 (168millisec) * 3 ticks -> 500ms */
#define UVH_BAU_DATA_CONFIG 0x61680UL
#define UVH_BAU_DATA_CONFIG_32 0x0438
/* VIRT <-> MACHINE conversion */
#define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v))))
-#define virt_to_mfn(v) (pfn_to_mfn(PFN_DOWN(__pa(v))))
+#define virt_to_pfn(v) (PFN_DOWN(__pa(v)))
+#define virt_to_mfn(v) (pfn_to_mfn(virt_to_pfn(v)))
#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT))
static inline unsigned long pte_mfn(pte_t pte)
#define IVHD_DEV_EXT_SELECT 0x46
#define IVHD_DEV_EXT_SELECT_RANGE 0x47
-#define IVHD_FLAG_HT_TUN_EN 0x00
-#define IVHD_FLAG_PASSPW_EN 0x01
-#define IVHD_FLAG_RESPASSPW_EN 0x02
-#define IVHD_FLAG_ISOC_EN 0x03
+#define IVHD_FLAG_HT_TUN_EN_MASK 0x01
+#define IVHD_FLAG_PASSPW_EN_MASK 0x02
+#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04
+#define IVHD_FLAG_ISOC_EN_MASK 0x08
#define IVMD_FLAG_EXCL_RANGE 0x08
#define IVMD_FLAG_UNITY_MAP 0x01
* First set the recommended feature enable bits from ACPI
* into the IOMMU control registers
*/
- h->flags & IVHD_FLAG_HT_TUN_EN ?
+ h->flags & IVHD_FLAG_HT_TUN_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
- h->flags & IVHD_FLAG_PASSPW_EN ?
+ h->flags & IVHD_FLAG_PASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
- h->flags & IVHD_FLAG_RESPASSPW_EN ?
+ h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
- h->flags & IVHD_FLAG_ISOC_EN ?
+ h->flags & IVHD_FLAG_ISOC_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
iommu_feature_disable(iommu, CONTROL_ISOC_EN);
{
int ret;
struct msi_msg msg;
+ struct irq_desc *desc = irq_to_desc(irq);
ret = msi_compose_msg(NULL, irq, &msg);
if (ret < 0)
return ret;
hpet_msi_write(irq, &msg);
+ desc->status |= IRQ_MOVE_PCNTXT;
set_irq_chip_and_handler_name(irq, &hpet_msi_type, handle_edge_irq,
"edge");
if (!prev_nmi_count)
goto error;
- alloc_cpumask_var(&backtrace_mask, GFP_KERNEL);
+ alloc_cpumask_var(&backtrace_mask, GFP_KERNEL|__GFP_ZERO);
printk(KERN_INFO "Testing NMI watchdog ... ");
#ifdef CONFIG_SMP
touched = 1;
}
- if (cpumask_test_cpu(cpu, backtrace_mask)) {
+ /* We can be called before check_nmi_watchdog, hence NULL check. */
+ if (backtrace_mask != NULL && cpumask_test_cpu(cpu, backtrace_mask)) {
static DEFINE_SPINLOCK(lock); /* Serialise the printks */
spin_lock(&lock);
#include <linux/timer.h>
#include <linux/cpu.h>
#include <linux/init.h>
+#include <linux/io.h>
#include <asm/uv/uv_mmrs.h>
#include <asm/uv/uv_hub.h>
static enum uv_system_type uv_system_type;
+static int early_get_nodeid(void)
+{
+ union uvh_node_id_u node_id;
+ unsigned long *mmr;
+
+ mmr = early_ioremap(UV_LOCAL_MMR_BASE | UVH_NODE_ID, sizeof(*mmr));
+ node_id.v = *mmr;
+ early_iounmap(mmr, sizeof(*mmr));
+ return node_id.s.node_id;
+}
+
static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
if (!strcmp(oem_id, "SGI")) {
else if (!strcmp(oem_table_id, "UVX"))
uv_system_type = UV_X2APIC;
else if (!strcmp(oem_table_id, "UVH")) {
+ __get_cpu_var(x2apic_extra_bits) =
+ early_get_nodeid() << (UV_APIC_PNODE_SHIFT - 1);
uv_system_type = UV_NON_UNIQUE_APIC;
return 1;
}
unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
int max_pnode = 0;
- unsigned long mmr_base, present;
+ unsigned long mmr_base, present, paddr;
+ unsigned short pnode_mask;
map_low_mmrs();
}
}
+ pnode_mask = (1 << n_val) - 1;
node_id.v = uv_read_local_mmr(UVH_NODE_ID);
gnode_upper = (((unsigned long)node_id.s.node_id) &
~((1 << n_val) - 1)) << m_val;
uv_cpu_hub_info(cpu)->numa_blade_id = blade;
uv_cpu_hub_info(cpu)->blade_processor_id = lcpu;
uv_cpu_hub_info(cpu)->pnode = pnode;
- uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) - 1;
+ uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
lcpu, blade);
}
+ /* Add blade/pnode info for nodes without cpus */
+ for_each_online_node(nid) {
+ if (uv_node_to_blade[nid] >= 0)
+ continue;
+ paddr = node_start_pfn(nid) << PAGE_SHIFT;
+ paddr = uv_soc_phys_ram_to_gpa(paddr);
+ pnode = (paddr >> m_val) & pnode_mask;
+ blade = boot_pnode_to_blade(pnode);
+ uv_node_to_blade[nid] = blade;
+ }
+
map_gru_high(max_pnode);
map_mmr_high(max_pnode);
map_config_high(max_pnode);
memcpy(&uv_systab, tab, sizeof(struct uv_systab));
iounmap(tab);
- printk(KERN_INFO "EFI UV System Table Revision %d\n", tab->revision);
+ printk(KERN_INFO "EFI UV System Table Revision %d\n",
+ uv_systab.revision);
}
#else /* !CONFIG_EFI */
load_TR_desc();
load_LDT(&init_mm.context);
+ t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+
#ifdef CONFIG_DOUBLEFAULT
/* Set up doublefault TSS pointer in the GDT */
__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
struct acpi_cpufreq_data {
struct acpi_processor_performance *acpi_data;
struct cpufreq_frequency_table *freq_table;
- unsigned int max_freq;
unsigned int resume;
unsigned int cpu_feature;
- u64 saved_aperf, saved_mperf;
};
static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data);
+struct acpi_msr_data {
+ u64 saved_aperf, saved_mperf;
+};
+
+static DEFINE_PER_CPU(struct acpi_msr_data, msr_data);
+
DEFINE_TRACE(power_mark);
/* acpi_perf_data is a pointer to percpu data. */
static void drv_write(struct drv_cmd *cmd)
{
+ int this_cpu;
+
+ this_cpu = get_cpu();
+ if (cpumask_test_cpu(this_cpu, cmd->mask))
+ do_drv_write(cmd);
smp_call_function_many(cmd->mask, do_drv_write, cmd, 1);
+ put_cpu();
}
static u32 get_cur_val(const struct cpumask *mask)
unsigned int perf_percent;
unsigned int retval;
- if (smp_call_function_single(cpu, read_measured_perf_ctrs, &cur, 1))
+ if (smp_call_function_single(cpu, read_measured_perf_ctrs, &readin, 1))
return 0;
cur.aperf.whole = readin.aperf.whole -
- per_cpu(drv_data, cpu)->saved_aperf;
+ per_cpu(msr_data, cpu).saved_aperf;
cur.mperf.whole = readin.mperf.whole -
- per_cpu(drv_data, cpu)->saved_mperf;
- per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole;
- per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole;
+ per_cpu(msr_data, cpu).saved_mperf;
+ per_cpu(msr_data, cpu).saved_aperf = readin.aperf.whole;
+ per_cpu(msr_data, cpu).saved_mperf = readin.mperf.whole;
#ifdef __i386__
/*
#endif
- retval = per_cpu(drv_data, policy->cpu)->max_freq * perf_percent / 100;
+ retval = (policy->cpuinfo.max_freq * perf_percent) / 100;
return retval;
}
/* Check for high latency (>20uS) from buggy BIOSes, like on T42 */
if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
policy->cpuinfo.transition_latency > 20 * 1000) {
- static int print_once;
policy->cpuinfo.transition_latency = 20 * 1000;
- if (!print_once) {
- print_once = 1;
- printk(KERN_INFO "Capping off P-state tranision latency"
- " at 20 uS\n");
- }
+ printk_once(KERN_INFO "Capping off P-state tranision"
+ " latency at 20 uS\n");
}
- data->max_freq = perf->states[0].core_frequency * 1000;
/* table init */
for (i = 0; i < perf->state_count; i++) {
if (i > 0 && perf->states[i].core_frequency >=
if (result)
goto err_freqfree;
+ if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
+ printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
+
switch (perf->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
/* Current speed is unknown and not detectable by IO port */
* Don't get the IP here because it's unlikely to
* have anything to do with the actual error location.
*/
-
- mce_log(&m);
- add_taint(TAINT_MACHINE_CHECK);
+ if (!(flags & MCP_DONTLOG)) {
+ mce_log(&m);
+ add_taint(TAINT_MACHINE_CHECK);
+ }
/*
* Clear state for this bank.
*/
static int check_interval = 5 * 60; /* 5 minutes */
-static int next_interval; /* in jiffies */
+static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
static void mcheck_timer(unsigned long);
static DEFINE_PER_CPU(struct timer_list, mce_timer);
static void mcheck_timer(unsigned long data)
{
struct timer_list *t = &per_cpu(mce_timer, data);
+ int *n;
WARN_ON(smp_processor_id() != data);
* Alert userspace if needed. If we logged an MCE, reduce the
* polling interval, otherwise increase the polling interval.
*/
+ n = &__get_cpu_var(next_interval);
if (mce_notify_user()) {
- next_interval = max(next_interval/2, HZ/100);
+ *n = max(*n/2, HZ/100);
} else {
- next_interval = min(next_interval * 2,
- (int)round_jiffies_relative(check_interval*HZ));
+ *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
}
- t->expires = jiffies + next_interval;
+ t->expires = jiffies + *n;
add_timer(t);
}
* Log the machine checks left over from the previous reset.
*/
bitmap_fill(all_banks, MAX_NR_BANKS);
- machine_check_poll(MCP_UC, &all_banks);
+ machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
set_in_cr4(X86_CR4_MCE);
static void mce_init_timer(void)
{
struct timer_list *t = &__get_cpu_var(mce_timer);
+ int *n = &__get_cpu_var(next_interval);
- /* data race harmless because everyone sets to the same value */
- if (!next_interval)
- next_interval = check_interval * HZ;
- if (!next_interval)
+ *n = check_interval * HZ;
+ if (!*n)
return;
setup_timer(t, mcheck_timer, smp_processor_id());
- t->expires = round_jiffies(jiffies + next_interval);
+ t->expires = round_jiffies(jiffies + *n);
add_timer(t);
}
/* Reinit MCEs after user configuration changes */
static void mce_restart(void)
{
- next_interval = check_interval * HZ;
on_each_cpu(mce_cpu_restart, NULL, 1);
}
break;
case CPU_DOWN_FAILED:
case CPU_DOWN_FAILED_FROZEN:
- t->expires = round_jiffies(jiffies + next_interval);
+ t->expires = round_jiffies(jiffies +
+ __get_cpu_var(next_interval));
add_timer_on(t, cpu);
smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
break;
static void cmci_discover(int banks, int boot)
{
unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
+ unsigned long flags;
int hdr = 0;
int i;
- spin_lock(&cmci_discover_lock);
+ spin_lock_irqsave(&cmci_discover_lock, flags);
for (i = 0; i < banks; i++) {
u64 val;
WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
}
}
- spin_unlock(&cmci_discover_lock);
+ spin_unlock_irqrestore(&cmci_discover_lock, flags);
if (hdr)
printk(KERN_CONT "\n");
}
*/
void cmci_clear(void)
{
+ unsigned long flags;
int i;
int banks;
u64 val;
if (!cmci_supported(&banks))
return;
- spin_lock(&cmci_discover_lock);
+ spin_lock_irqsave(&cmci_discover_lock, flags);
for (i = 0; i < banks; i++) {
if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
continue;
wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
__clear_bit(i, __get_cpu_var(mce_banks_owned));
}
- spin_unlock(&cmci_discover_lock);
+ spin_unlock_irqrestore(&cmci_discover_lock, flags);
}
/*
if (c->x86_max_cores * smp_num_siblings > 1) {
seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
seq_printf(m, "siblings\t: %d\n",
- cpumask_weight(cpu_sibling_mask(cpu)));
+ cpumask_weight(cpu_core_mask(cpu)));
seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
seq_printf(m, "apicid\t\t: %d\n", c->apicid);
u64 addr;
u64 start;
- start = startt;
- while (size < sizet && (start + 1))
+ for (start = startt; ; start += size) {
start = find_e820_area_size(start, &size, align);
-
- if (size < sizet)
- return 0;
+ if (!(start + 1))
+ return 0;
+ if (size >= sizet)
+ break;
+ }
#ifdef CONFIG_X86_32
if (start >= MAXMEM)
paranoid_swapgs:
TRACE_IRQS_IRETQ 0
SWAPGS_UNSAFE_STACK
+ RESTORE_ALL 8
+ jmp irq_return
paranoid_restore:
+ TRACE_IRQS_IRETQ 0
RESTORE_ALL 8
jmp irq_return
paranoid_userspace:
unsigned long cfg = hpet_readl(HPET_CFG);
cfg &= ~HPET_CFG_ENABLE;
hpet_writel(cfg, HPET_CFG);
+}
+
+static void hpet_reset_counter(void)
+{
hpet_writel(0, HPET_COUNTER);
hpet_writel(0, HPET_COUNTER + 4);
}
static void hpet_restart_counter(void)
{
hpet_stop_counter();
+ hpet_reset_counter();
hpet_start_counter();
}
static void hpet_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt, int timer)
{
- unsigned long cfg;
+ unsigned long cfg, cmp, now;
uint64_t delta;
switch (mode) {
hpet_stop_counter();
delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
delta >>= evt->shift;
+ now = hpet_readl(HPET_COUNTER);
+ cmp = now + (unsigned long) delta;
cfg = hpet_readl(HPET_Tn_CFG(timer));
/* Make sure we use edge triggered interrupts */
cfg &= ~HPET_TN_LEVEL;
cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
HPET_TN_SETVAL | HPET_TN_32BIT;
hpet_writel(cfg, HPET_Tn_CFG(timer));
+ hpet_writel(cmp, HPET_Tn_CMP(timer));
+ udelay(1);
+ /*
+ * HPET on AMD 81xx needs a second write (with HPET_TN_SETVAL
+ * cleared) to T0_CMP to set the period. The HPET_TN_SETVAL
+ * bit is automatically cleared after the first write.
+ * (See AMD-8111 HyperTransport I/O Hub Data Sheet,
+ * Publication # 24674)
+ */
hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
hpet_start_counter();
hpet_print_config();
/*
* Clock source related code
*/
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
{
return (cycle_t)hpet_readl(HPET_COUNTER);
}
hpet_restart_counter();
/* Verify whether hpet counter works */
- t1 = read_hpet();
+ t1 = hpet_readl(HPET_COUNTER);
rdtscll(start);
/*
rdtscll(now);
} while ((now - start) < 200000UL);
- if (t1 == read_hpet()) {
+ if (t1 == hpet_readl(HPET_COUNTER)) {
printk(KERN_WARNING
"HPET counter not counting. HPET disabled\n");
return -ENODEV;
* to just read by itself. So use jiffies to emulate a free
* running counter:
*/
-static cycle_t pit_read(void)
+static cycle_t pit_read(struct clocksource *cs)
{
static int old_count;
static u32 old_jifs;
gdb_regs[GDB_SS] = __KERNEL_DS;
gdb_regs[GDB_FS] = 0xFFFF;
gdb_regs[GDB_GS] = 0xFFFF;
+ gdb_regs[GDB_SP] = (int)®s->sp;
#else
gdb_regs[GDB_R8] = regs->r8;
gdb_regs[GDB_R9] = regs->r9;
gdb_regs32[GDB_PS] = regs->flags;
gdb_regs32[GDB_CS] = regs->cs;
gdb_regs32[GDB_SS] = regs->ss;
-#endif
gdb_regs[GDB_SP] = regs->sp;
+#endif
}
/**
return ret;
}
+static cycle_t kvm_clock_get_cycles(struct clocksource *cs)
+{
+ return kvm_clock_read();
+}
+
/*
* If we don't do that, there is the possibility that the guest
* will calibrate under heavy load - thus, getting a lower lpj -
static struct clocksource kvm_clock = {
.name = "kvm-clock",
- .read = kvm_clock_read,
+ .read = kvm_clock_get_cycles,
.rating = 400,
.mask = CLOCKSOURCE_MASK(64),
.mult = 1 << KVM_SCALE,
unsigned int preserve_context);
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
save_processor_state();
#endif
image->preserve_context);
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
restore_processor_state();
#endif
int save_ftrace_enabled;
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
save_processor_state();
#endif
image->preserve_context);
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
restore_processor_state();
#endif
EXPORT_SYMBOL_GPL(ucode_cpu_info);
#ifdef CONFIG_MICROCODE_OLD_INTERFACE
-struct update_for_cpu {
- const void __user *buf;
- size_t size;
-};
-
-static long update_for_cpu(void *_ufc)
-{
- struct update_for_cpu *ufc = _ufc;
- int error;
-
- error = microcode_ops->request_microcode_user(smp_processor_id(),
- ufc->buf, ufc->size);
- if (error < 0)
- return error;
- if (!error)
- microcode_ops->apply_microcode(smp_processor_id());
- return error;
-}
-
static int do_microcode_update(const void __user *buf, size_t size)
{
+ cpumask_t old;
int error = 0;
int cpu;
- struct update_for_cpu ufc = { .buf = buf, .size = size };
+
+ old = current->cpus_allowed;
for_each_online_cpu(cpu) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
if (!uci->valid)
continue;
- error = work_on_cpu(cpu, update_for_cpu, &ufc);
+
+ set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
+ error = microcode_ops->request_microcode_user(cpu, buf, size);
if (error < 0)
- break;
+ goto out;
+ if (!error)
+ microcode_ops->apply_microcode(cpu);
}
+out:
+ set_cpus_allowed_ptr(current, &old);
return error;
}
return err;
err = microcode_init_cpu(cpu);
- if (err)
- sysfs_remove_group(&sys_dev->kobj, &mc_attr_group);
return err;
}
return swiotlb_alloc_coherent(hwdev, size, dma_handle, flags);
}
-struct dma_map_ops swiotlb_dma_ops = {
+static struct dma_map_ops swiotlb_dma_ops = {
.mapping_error = swiotlb_dma_mapping_error,
.alloc_coherent = x86_swiotlb_alloc_coherent,
.free_coherent = swiotlb_free_coherent,
{
if (hpet_force_user)
old_ich_force_enable_hpet(dev);
- else
- hpet_print_force_info();
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_1,
/* position of pnode (which is nasid>>1): */
static int uv_nshift __read_mostly;
+/* base pnode in this partition */
+static int uv_partition_base_pnode __read_mostly;
static unsigned long uv_mmask __read_mostly;
static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
static DEFINE_PER_CPU(struct bau_control, bau_control);
+/*
+ * Determine the first node on a blade.
+ */
+static int __init blade_to_first_node(int blade)
+{
+ int node, b;
+
+ for_each_online_node(node) {
+ b = uv_node_to_blade_id(node);
+ if (blade == b)
+ return node;
+ }
+ return -1; /* shouldn't happen */
+}
+
+/*
+ * Determine the apicid of the first cpu on a blade.
+ */
+static int __init blade_to_first_apicid(int blade)
+{
+ int cpu;
+
+ for_each_present_cpu(cpu)
+ if (blade == uv_cpu_to_blade_id(cpu))
+ return per_cpu(x86_cpu_to_apicid, cpu);
+ return -1;
+}
+
/*
* Free a software acknowledge hardware resource by clearing its Pending
* bit. This will return a reply to the sender.
msp = __get_cpu_var(bau_control).msg_statuses + msg_slot;
cpu = uv_blade_processor_id();
msg->number_of_cpus =
- uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
+ uv_blade_nr_online_cpus(uv_node_to_blade_id(numa_node_id()));
this_cpu_mask = 1UL << cpu;
if (msp->seen_by.bits & this_cpu_mask)
return;
* Returns @flush_mask if some remote flushing remains to be done. The
* mask will have some bits still set.
*/
-const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade,
+const struct cpumask *uv_flush_send_and_wait(int cpu, int this_pnode,
struct bau_desc *bau_desc,
struct cpumask *flush_mask)
{
int completion_status = 0;
int right_shift;
int tries = 0;
- int blade;
+ int pnode;
int bit;
unsigned long mmr_offset;
unsigned long index;
* use the IPI method of shootdown on them.
*/
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- if (blade == this_blade)
+ pnode = uv_cpu_to_pnode(bit);
+ if (pnode == this_pnode)
continue;
cpumask_clear_cpu(bit, flush_mask);
}
struct cpumask *flush_mask = __get_cpu_var(uv_flush_tlb_mask);
int i;
int bit;
- int blade;
+ int pnode;
int uv_cpu;
- int this_blade;
+ int this_pnode;
int locals = 0;
struct bau_desc *bau_desc;
cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
uv_cpu = uv_blade_processor_id();
- this_blade = uv_numa_blade_id();
+ this_pnode = uv_hub_info->pnode;
bau_desc = __get_cpu_var(bau_control).descriptor_base;
bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu;
i = 0;
for_each_cpu(bit, flush_mask) {
- blade = uv_cpu_to_blade_id(bit);
- BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1));
- if (blade == this_blade) {
+ pnode = uv_cpu_to_pnode(bit);
+ BUG_ON(pnode > (UV_DISTRIBUTION_SIZE - 1));
+ if (pnode == this_pnode) {
locals++;
continue;
}
- bau_node_set(blade, &bau_desc->distribution);
+ bau_node_set(pnode - uv_partition_base_pnode,
+ &bau_desc->distribution);
i++;
}
if (i == 0) {
bau_desc->payload.address = va;
bau_desc->payload.sending_cpu = cpu;
- return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask);
+ return uv_flush_send_and_wait(uv_cpu, this_pnode, bau_desc, flush_mask);
}
/*
set_irq_regs(old_regs);
}
+/*
+ * uv_enable_timeouts
+ *
+ * Each target blade (i.e. blades that have cpu's) needs to have
+ * shootdown message timeouts enabled. The timeout does not cause
+ * an interrupt, but causes an error message to be returned to
+ * the sender.
+ */
static void uv_enable_timeouts(void)
{
- int i;
int blade;
- int last_blade;
+ int nblades;
int pnode;
- int cur_cpu = 0;
- unsigned long apicid;
+ unsigned long mmr_image;
- last_blade = -1;
- for_each_online_node(i) {
- blade = uv_node_to_blade_id(i);
- if (blade == last_blade)
+ nblades = uv_num_possible_blades();
+
+ for (blade = 0; blade < nblades; blade++) {
+ if (!uv_blade_nr_possible_cpus(blade))
continue;
- last_blade = blade;
- apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+
pnode = uv_blade_to_pnode(blade);
- cur_cpu += uv_blade_nr_possible_cpus(i);
+ mmr_image =
+ uv_read_global_mmr64(pnode, UVH_LB_BAU_MISC_CONTROL);
+ /*
+ * Set the timeout period and then lock it in, in three
+ * steps; captures and locks in the period.
+ *
+ * To program the period, the SOFT_ACK_MODE must be off.
+ */
+ mmr_image &= ~((unsigned long)1 <<
+ UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+ uv_write_global_mmr64
+ (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+ /*
+ * Set the 4-bit period.
+ */
+ mmr_image &= ~((unsigned long)0xf <<
+ UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+ mmr_image |= (UV_INTD_SOFT_ACK_TIMEOUT_PERIOD <<
+ UV_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHIFT);
+ uv_write_global_mmr64
+ (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
+ /*
+ * Subsequent reversals of the timebase bit (3) cause an
+ * immediate timeout of one or all INTD resources as
+ * indicated in bits 2:0 (7 causes all of them to timeout).
+ */
+ mmr_image |= ((unsigned long)1 <<
+ UV_ENABLE_INTD_SOFT_ACK_MODE_SHIFT);
+ uv_write_global_mmr64
+ (pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
}
}
stat->requestee, stat->onetlb, stat->alltlb,
stat->s_retry, stat->d_retry, stat->ptc_i);
seq_printf(file, "%lx %ld %ld %ld %ld %ld %ld\n",
- uv_read_global_mmr64(uv_blade_to_pnode
- (uv_cpu_to_blade_id(cpu)),
+ uv_read_global_mmr64(uv_cpu_to_pnode(cpu),
UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE),
stat->sflush, stat->dflush,
stat->retriesok, stat->nomsg,
* finish the initialization of the per-blade control structures
*/
static void __init
-uv_table_bases_finish(int blade, int node, int cur_cpu,
+uv_table_bases_finish(int blade,
struct bau_control *bau_tablesp,
struct bau_desc *adp)
{
struct bau_control *bcp;
- int i;
+ int cpu;
- for (i = cur_cpu; i < cur_cpu + uv_blade_nr_possible_cpus(blade); i++) {
- bcp = (struct bau_control *)&per_cpu(bau_control, i);
+ for_each_present_cpu(cpu) {
+ if (blade != uv_cpu_to_blade_id(cpu))
+ continue;
+ bcp = (struct bau_control *)&per_cpu(bau_control, cpu);
bcp->bau_msg_head = bau_tablesp->va_queue_first;
bcp->va_queue_first = bau_tablesp->va_queue_first;
bcp->va_queue_last = bau_tablesp->va_queue_last;
struct bau_desc *adp;
struct bau_desc *ad2;
- adp = (struct bau_desc *)
- kmalloc_node(16384, GFP_KERNEL, node);
+ adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
BUG_ON(!adp);
- pa = __pa((unsigned long)adp);
+ pa = uv_gpa(adp); /* need the real nasid*/
n = pa >> uv_nshift;
m = pa & uv_mmask;
for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
memset(ad2, 0, sizeof(struct bau_desc));
ad2->header.sw_ack_flag = 1;
- ad2->header.base_dest_nodeid =
- uv_blade_to_pnode(uv_cpu_to_blade_id(0));
+ /*
+ * base_dest_nodeid is the first node in the partition, so
+ * the bit map will indicate partition-relative node numbers.
+ * note that base_dest_nodeid is actually a nasid.
+ */
+ ad2->header.base_dest_nodeid = uv_partition_base_pnode << 1;
ad2->header.command = UV_NET_ENDPOINT_INTD;
ad2->header.int_both = 1;
/*
uv_payload_queue_init(int node, int pnode, struct bau_control *bau_tablesp)
{
struct bau_payload_queue_entry *pqp;
+ unsigned long pa;
+ int pn;
char *cp;
pqp = (struct bau_payload_queue_entry *) kmalloc_node(
cp = (char *)pqp + 31;
pqp = (struct bau_payload_queue_entry *)(((unsigned long)cp >> 5) << 5);
bau_tablesp->va_queue_first = pqp;
+ /*
+ * need the pnode of where the memory was really allocated
+ */
+ pa = uv_gpa(pqp);
+ pn = pa >> uv_nshift;
uv_write_global_mmr64(pnode,
UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST,
- ((unsigned long)pnode <<
- UV_PAYLOADQ_PNODE_SHIFT) |
+ ((unsigned long)pn << UV_PAYLOADQ_PNODE_SHIFT) |
uv_physnodeaddr(pqp));
uv_write_global_mmr64(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL,
uv_physnodeaddr(pqp));
/*
* Initialization of each UV blade's structures
*/
-static int __init uv_init_blade(int blade, int node, int cur_cpu)
+static int __init uv_init_blade(int blade)
{
+ int node;
int pnode;
unsigned long pa;
unsigned long apicid;
struct bau_payload_queue_entry *pqp;
struct bau_control *bau_tablesp;
+ node = blade_to_first_node(blade);
bau_tablesp = uv_table_bases_init(blade, node);
pnode = uv_blade_to_pnode(blade);
adp = uv_activation_descriptor_init(node, pnode);
pqp = uv_payload_queue_init(node, pnode, bau_tablesp);
- uv_table_bases_finish(blade, node, cur_cpu, bau_tablesp, adp);
+ uv_table_bases_finish(blade, bau_tablesp, adp);
/*
* the below initialization can't be in firmware because the
* messaging IRQ will be determined by the OS
*/
- apicid = per_cpu(x86_cpu_to_apicid, cur_cpu);
+ apicid = blade_to_first_apicid(blade);
pa = uv_read_global_mmr64(pnode, UVH_BAU_DATA_CONFIG);
if ((pa & 0xff) != UV_BAU_MESSAGE) {
uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG,
static int __init uv_bau_init(void)
{
int blade;
- int node;
int nblades;
- int last_blade;
int cur_cpu;
if (!is_uv_system())
uv_bau_retry_limit = 1;
uv_nshift = uv_hub_info->n_val;
uv_mmask = (1UL << uv_hub_info->n_val) - 1;
- nblades = 0;
- last_blade = -1;
- cur_cpu = 0;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- nblades++;
- }
+ nblades = uv_num_possible_blades();
+
uv_bau_table_bases = (struct bau_control **)
kmalloc(nblades * sizeof(struct bau_control *), GFP_KERNEL);
BUG_ON(!uv_bau_table_bases);
- last_blade = -1;
- for_each_online_node(node) {
- blade = uv_node_to_blade_id(node);
- if (blade == last_blade)
- continue;
- last_blade = blade;
- uv_init_blade(blade, node, cur_cpu);
- cur_cpu += uv_blade_nr_possible_cpus(blade);
- }
+ uv_partition_base_pnode = 0x7fffffff;
+ for (blade = 0; blade < nblades; blade++)
+ if (uv_blade_nr_possible_cpus(blade) &&
+ (uv_blade_to_pnode(blade) < uv_partition_base_pnode))
+ uv_partition_base_pnode = uv_blade_to_pnode(blade);
+ for (blade = 0; blade < nblades; blade++)
+ if (uv_blade_nr_possible_cpus(blade))
+ uv_init_blade(blade);
+
alloc_intr_gate(UV_BAU_MESSAGE, uv_bau_message_intr1);
uv_enable_timeouts();
* code, which is necessary to support wrapping clocksources like pm
* timer.
*/
-static cycle_t read_tsc(void)
+static cycle_t read_tsc(struct clocksource *cs)
{
cycle_t ret = (cycle_t)get_cycles();
#include <linux/sysdev.h>
#include <asm/uv/bios.h>
+#include <asm/uv/uv.h>
struct kobject *sgi_uv_kobj;
{
unsigned long ret;
+ if (!is_uv_system())
+ return -ENODEV;
+
if (!sgi_uv_kobj)
sgi_uv_kobj = kobject_create_and_add("sgi_uv", firmware_kobj);
if (!sgi_uv_kobj) {
#define RTC_NAME "sgi_rtc"
-static cycle_t uv_read_rtc(void);
+static cycle_t uv_read_rtc(struct clocksource *cs);
static int uv_rtc_next_event(unsigned long, struct clock_event_device *);
static void uv_rtc_timer_setup(enum clock_event_mode,
struct clock_event_device *);
/* Initialize comparator value */
uv_write_global_mmr64(pnode, UVH_INT_CMPB, expires);
- return (expires < uv_read_rtc() && !uv_intr_pending(pnode));
+ return (expires < uv_read_rtc(NULL) && !uv_intr_pending(pnode));
}
/*
spin_lock_irqsave(&head->lock, flags);
- if (head->next_cpu == bcpu && uv_read_rtc() >= *t)
+ if (head->next_cpu == bcpu && uv_read_rtc(NULL) >= *t)
rc = 1;
*t = ULLONG_MAX;
/*
* Read the RTC.
*/
-static cycle_t uv_read_rtc(void)
+static cycle_t uv_read_rtc(struct clocksource *cs)
{
return (cycle_t)uv_read_local_mmr(UVH_RTC);
}
{
int ced_cpu = cpumask_first(ced->cpumask);
- return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc());
+ return uv_rtc_set_timer(ced_cpu, delta + uv_read_rtc(NULL));
}
/*
/** vmi clocksource */
static struct clocksource clocksource_vmi;
-static cycle_t read_real_cycles(void)
+static cycle_t read_real_cycles(struct clocksource *cs)
{
cycle_t ret = (cycle_t)vmi_timer_ops.get_cycle_counter(VMI_CYCLES_REAL);
return max(ret, clocksource_vmi.cycle_last);
if (!used_math())
return 0;
- clear_used_math(); /* trigger finit */
+
if (task_thread_info(tsk)->status & TS_USEDFPU) {
/*
* Start with clearing the user buffer. This will present a
return -1;
}
+ clear_used_math(); /* trigger finit */
+
if (task_thread_info(tsk)->status & TS_XSAVE) {
struct _fpstate __user *fx = buf;
struct _xstate __user *x = buf;
pgprintk("%s: adding gfn %lx role %x\n", __func__, gfn, role.word);
sp->gfn = gfn;
sp->role = role;
- sp->global = role.cr4_pge;
+ sp->global = 0;
hlist_add_head(&sp->hash_link, bucket);
if (!direct) {
if (rmap_write_protect(vcpu->kvm, gfn))
iopm_va = page_address(iopm_pages);
memset(iopm_va, 0xff, PAGE_SIZE * (1 << IOPM_ALLOC_ORDER));
- clear_bit(0x80, iopm_va); /* allow direct access to PC debug port */
iopm_base = page_to_pfn(iopm_pages) << PAGE_SHIFT;
if (boot_cpu_has(X86_FEATURE_NX))
var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1;
var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1;
+ /* AMD's VMCB does not have an explicit unusable field, so emulate it
+ * for cross vendor migration purposes by "not present"
+ */
+ var->unusable = !var->present || (var->type == 0);
+
switch (seg) {
case VCPU_SREG_CS:
/*
var->type |= 0x1;
break;
}
-
- var->unusable = !var->present;
}
static int svm_get_cpl(struct kvm_vcpu *vcpu)
static int is_efer_nx(void)
{
- u64 efer;
+ unsigned long long efer = 0;
- rdmsrl(MSR_EFER, efer);
+ rdmsrl_safe(MSR_EFER, &efer);
return efer & EFER_NX;
}
bit(X86_FEATURE_CMOV) | bit(X86_FEATURE_PSE36) |
bit(X86_FEATURE_MMX) | bit(X86_FEATURE_FXSR) |
bit(X86_FEATURE_SYSCALL) |
- (bit(X86_FEATURE_NX) && is_efer_nx()) |
+ (is_efer_nx() ? bit(X86_FEATURE_NX) : 0) |
#ifdef CONFIG_X86_64
bit(X86_FEATURE_LM) |
#endif
void kvm_arch_exit(void)
{
+ if (!boot_cpu_has(X86_FEATURE_CONSTANT_TSC))
+ cpufreq_unregister_notifier(&kvmclock_cpufreq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
kvm_x86_ops = NULL;
kvm_mmu_module_exit();
}
void kvm_arch_vcpu_free(struct kvm_vcpu *vcpu)
{
+ if (vcpu->arch.time_page) {
+ kvm_release_page_dirty(vcpu->arch.time_page);
+ vcpu->arch.time_page = NULL;
+ }
+
kvm_x86_ops->vcpu_free(vcpu);
}
* controls the entire thing and the Guest asks it to make changes using the
* LOAD_GDT hypercall.
*
- * This is the opposite of the IDT code where we have a LOAD_IDT_ENTRY
- * hypercall and use that repeatedly to load a new IDT. I don't think it
- * really matters, but wouldn't it be nice if they were the same? Wouldn't
- * it be even better if you were the one to send the patch to fix it?
+ * This is the exactly like the IDT code.
*/
static void lguest_load_gdt(const struct desc_ptr *desc)
{
- BUG_ON((desc->size + 1) / 8 != GDT_ENTRIES);
- kvm_hypercall2(LHCALL_LOAD_GDT, __pa(desc->address), GDT_ENTRIES);
+ unsigned int i;
+ struct desc_struct *gdt = (void *)desc->address;
+
+ for (i = 0; i < (desc->size+1)/8; i++)
+ kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
}
/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
const void *desc, int type)
{
native_write_gdt_entry(dt, entrynum, desc, type);
- kvm_hypercall2(LHCALL_LOAD_GDT, __pa(dt), GDT_ENTRIES);
+ /* Tell Host about this new entry. */
+ kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, entrynum,
+ dt[entrynum].a, dt[entrynum].b);
}
/* OK, I lied. There are three "thread local storage" GDT entries which change
/* If we can't use the TSC, the kernel falls back to our lower-priority
* "lguest_clock", where we read the time value given to us by the Host. */
-static cycle_t lguest_clock_read(void)
+static cycle_t lguest_clock_read(struct clocksource *cs)
{
unsigned long sec, nsec;
#include <asm/page.h>
#include <asm/page_types.h>
#include <asm/sections.h>
+#include <asm/setup.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
#endif
#ifdef CONFIG_X86_64
- if (!after_bootmem)
+ if (!after_bootmem && !start) {
+ pud_t *pud;
+ pmd_t *pmd;
+
mmu_cr4_features = read_cr4();
+
+ /*
+ * _brk_end cannot change anymore, but it and _end may be
+ * located on different 2M pages. cleanup_highmap(), however,
+ * can only consider _end when it runs, so destroy any
+ * mappings beyond _brk_end here.
+ */
+ pud = pud_offset(pgd_offset_k(_brk_end), _brk_end);
+ pmd = pmd_offset(pud, _brk_end - 1);
+ while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1))
+ pmd_clear(pmd);
+ }
#endif
__flush_tlb_all();
return NULL;
area->phys_addr = phys_addr;
vaddr = (unsigned long) area->addr;
- if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
+
+ if (kernel_map_sync_memtype(phys_addr, size, prot_val)) {
free_memtype(phys_addr, phys_addr + size);
free_vm_area(area);
return NULL;
}
- if (ioremap_change_attr(vaddr, size, prot_val) < 0) {
+ if (ioremap_page_range(vaddr, vaddr + size, phys_addr, prot)) {
free_memtype(phys_addr, phys_addr + size);
- vunmap(area->addr);
+ free_vm_area(area);
return NULL;
}
* - UC_MINUS for non-WB-able memory with no other conflicting mappings
* - Inherit from confliting mappings otherwise
*/
- err = reserve_memtype(phys_addr, phys_addr + size, -1, &flags);
+ err = reserve_memtype(phys_addr, phys_addr + size,
+ _PAGE_CACHE_WB, &flags);
if (err < 0)
return NULL;
{
struct kmmio_probe *p;
list_for_each_entry_rcu(p, &kmmio_probes, list) {
- if (addr >= p->addr && addr <= (p->addr + p->len))
+ if (addr >= p->addr && addr < (p->addr + p->len))
return p;
}
return NULL;
}
#endif
-static unsigned long calculate_numa_remap_pages(void)
+static __init unsigned long calculate_numa_remap_pages(void)
{
int nid;
unsigned long size, reserve_pages = 0;
const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
int nid;
+ if (!end)
+ return;
+
start = roundup(start, ZONE_ALIGN);
printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
int set_memory_uc(unsigned long addr, int numpages)
{
+ int ret;
+
/*
* for now UC MINUS. see comments in ioremap_nocache()
*/
- if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
- _PAGE_CACHE_UC_MINUS, NULL))
- return -EINVAL;
+ ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+ _PAGE_CACHE_UC_MINUS, NULL);
+ if (ret)
+ goto out_err;
+
+ ret = _set_memory_uc(addr, numpages);
+ if (ret)
+ goto out_free;
- return _set_memory_uc(addr, numpages);
+ return 0;
+
+out_free:
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+ return ret;
}
EXPORT_SYMBOL(set_memory_uc);
int set_memory_array_uc(unsigned long *addr, int addrinarray)
{
- unsigned long start;
- unsigned long end;
- int i;
+ int i, j;
+ int ret;
+
/*
* for now UC MINUS. see comments in ioremap_nocache()
*/
for (i = 0; i < addrinarray; i++) {
- start = __pa(addr[i]);
- for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
- if (end != __pa(addr[i + 1]))
- break;
- i++;
- }
- if (reserve_memtype(start, end, _PAGE_CACHE_UC_MINUS, NULL))
- goto out;
+ ret = reserve_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE,
+ _PAGE_CACHE_UC_MINUS, NULL);
+ if (ret)
+ goto out_free;
}
- return change_page_attr_set(addr, addrinarray,
+ ret = change_page_attr_set(addr, addrinarray,
__pgprot(_PAGE_CACHE_UC_MINUS), 1);
-out:
- for (i = 0; i < addrinarray; i++) {
- unsigned long tmp = __pa(addr[i]);
-
- if (tmp == start)
- break;
- for (end = tmp + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
- if (end != __pa(addr[i + 1]))
- break;
- i++;
- }
- free_memtype(tmp, end);
- }
- return -EINVAL;
+ if (ret)
+ goto out_free;
+
+ return 0;
+
+out_free:
+ for (j = 0; j < i; j++)
+ free_memtype(__pa(addr[j]), __pa(addr[j]) + PAGE_SIZE);
+
+ return ret;
}
EXPORT_SYMBOL(set_memory_array_uc);
int _set_memory_wc(unsigned long addr, int numpages)
{
- return change_page_attr_set(&addr, numpages,
+ int ret;
+ ret = change_page_attr_set(&addr, numpages,
+ __pgprot(_PAGE_CACHE_UC_MINUS), 0);
+
+ if (!ret) {
+ ret = change_page_attr_set(&addr, numpages,
__pgprot(_PAGE_CACHE_WC), 0);
+ }
+ return ret;
}
int set_memory_wc(unsigned long addr, int numpages)
{
+ int ret;
+
if (!pat_enabled)
return set_memory_uc(addr, numpages);
- if (reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
- _PAGE_CACHE_WC, NULL))
- return -EINVAL;
+ ret = reserve_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE,
+ _PAGE_CACHE_WC, NULL);
+ if (ret)
+ goto out_err;
+
+ ret = _set_memory_wc(addr, numpages);
+ if (ret)
+ goto out_free;
+
+ return 0;
- return _set_memory_wc(addr, numpages);
+out_free:
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+out_err:
+ return ret;
}
EXPORT_SYMBOL(set_memory_wc);
int set_memory_wb(unsigned long addr, int numpages)
{
- free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+ int ret;
+
+ ret = _set_memory_wb(addr, numpages);
+ if (ret)
+ return ret;
- return _set_memory_wb(addr, numpages);
+ free_memtype(__pa(addr), __pa(addr) + numpages * PAGE_SIZE);
+ return 0;
}
EXPORT_SYMBOL(set_memory_wb);
int set_memory_array_wb(unsigned long *addr, int addrinarray)
{
int i;
+ int ret;
- for (i = 0; i < addrinarray; i++) {
- unsigned long start = __pa(addr[i]);
- unsigned long end;
-
- for (end = start + PAGE_SIZE; i < addrinarray - 1; end += PAGE_SIZE) {
- if (end != __pa(addr[i + 1]))
- break;
- i++;
- }
- free_memtype(start, end);
- }
- return change_page_attr_clear(addr, addrinarray,
+ ret = change_page_attr_clear(addr, addrinarray,
__pgprot(_PAGE_CACHE_MASK), 1);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < addrinarray; i++)
+ free_memtype(__pa(addr[i]), __pa(addr[i]) + PAGE_SIZE);
+
+ return 0;
}
EXPORT_SYMBOL(set_memory_array_wb);
retval = cpa_clear_pages_array(pages, addrinarray,
__pgprot(_PAGE_CACHE_MASK));
+ if (retval)
+ return retval;
for (i = 0; i < addrinarray; i++) {
start = (unsigned long)page_address(pages[i]);
free_memtype(start, end);
}
- return retval;
+ return 0;
}
EXPORT_SYMBOL(set_pages_array_wb);
u8 mtrr_type;
mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == MTRR_TYPE_UNCACHABLE)
- return _PAGE_CACHE_UC;
- if (mtrr_type == MTRR_TYPE_WRCOMB)
- return _PAGE_CACHE_WC;
+ if (mtrr_type != MTRR_TYPE_WRBACK)
+ return _PAGE_CACHE_UC_MINUS;
+
+ return _PAGE_CACHE_WB;
}
return req_type;
return 0;
}
- if (req_type == -1) {
- /*
- * Call mtrr_lookup to get the type hint. This is an
- * optimization for /dev/mem mmap'ers into WB memory (BIOS
- * tools and ACPI tools). Use WB request for WB memory and use
- * UC_MINUS otherwise.
- */
- u8 mtrr_type = mtrr_type_lookup(start, end);
-
- if (mtrr_type == MTRR_TYPE_WRBACK)
- actual_type = _PAGE_CACHE_WB;
- else
- actual_type = _PAGE_CACHE_UC_MINUS;
- } else {
- actual_type = pat_x_mtrr_type(start, end,
- req_type & _PAGE_CACHE_MASK);
- }
+ /*
+ * Call mtrr_lookup to get the type hint. This is an
+ * optimization for /dev/mem mmap'ers into WB memory (BIOS
+ * tools and ACPI tools). Use WB request for WB memory and use
+ * UC_MINUS otherwise.
+ */
+ actual_type = pat_x_mtrr_type(start, end, req_type & _PAGE_CACHE_MASK);
if (new_type)
*new_type = actual_type;
int phys_mem_access_prot_allowed(struct file *file, unsigned long pfn,
unsigned long size, pgprot_t *vma_prot)
{
- u64 offset = ((u64) pfn) << PAGE_SHIFT;
- unsigned long flags = -1;
- int retval;
+ unsigned long flags = _PAGE_CACHE_WB;
if (!range_is_allowed(pfn, size))
return 0;
}
#endif
- /*
- * With O_SYNC, we can only take UC_MINUS mapping. Fail if we cannot.
- *
- * Without O_SYNC, we want to get
- * - WB for WB-able memory and no other conflicting mappings
- * - UC_MINUS for non-WB-able memory with no other conflicting mappings
- * - Inherit from confliting mappings otherwise
- */
- if (flags != -1) {
- retval = reserve_memtype(offset, offset + size, flags, NULL);
- } else {
- retval = reserve_memtype(offset, offset + size, -1, &flags);
- }
-
- if (retval < 0)
- return 0;
-
- if (((pfn < max_low_pfn_mapped) ||
- (pfn >= (1UL<<(32 - PAGE_SHIFT)) && pfn < max_pfn_mapped)) &&
- ioremap_change_attr((unsigned long)__va(offset), size, flags) < 0) {
- free_memtype(offset, offset + size);
- printk(KERN_INFO
- "%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
- current->comm, current->pid,
- cattr_name(flags),
- offset, (unsigned long long)(offset + size));
- return 0;
- }
-
*vma_prot = __pgprot((pgprot_val(*vma_prot) & ~_PAGE_CACHE_MASK) |
flags);
return 1;
}
-void map_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
- unsigned long want_flags = (pgprot_val(vma_prot) & _PAGE_CACHE_MASK);
- u64 addr = (u64)pfn << PAGE_SHIFT;
- unsigned long flags;
-
- reserve_memtype(addr, addr + size, want_flags, &flags);
- if (flags != want_flags) {
- printk(KERN_INFO
- "%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
- current->comm, current->pid,
- cattr_name(want_flags),
- addr, (unsigned long long)(addr + size),
- cattr_name(flags));
- }
-}
-
-void unmap_devmem(unsigned long pfn, unsigned long size, pgprot_t vma_prot)
-{
- u64 addr = (u64)pfn << PAGE_SHIFT;
-
- free_memtype(addr, addr + size);
-}
-
/*
* Change the memory type for the physial address range in kernel identity
* mapping space if that range is a part of identity map.
{
int is_ram = 0;
int ret;
- unsigned long flags;
unsigned long want_flags = (pgprot_val(*vma_prot) & _PAGE_CACHE_MASK);
+ unsigned long flags = want_flags;
is_ram = pat_pagerange_is_ram(paddr, paddr + size);
*
* If the vma has a linear pfn mapping for the entire range, we get the prot
* from pte and reserve the entire vma range with single reserve_pfn_range call.
- * Otherwise, we reserve the entire vma range, my ging through the PTEs page
- * by page to get physical address and protection.
*/
int track_pfn_vma_copy(struct vm_area_struct *vma)
{
- int retval = 0;
- unsigned long i, j;
resource_size_t paddr;
unsigned long prot;
- unsigned long vma_start = vma->vm_start;
- unsigned long vma_end = vma->vm_end;
- unsigned long vma_size = vma_end - vma_start;
+ unsigned long vma_size = vma->vm_end - vma->vm_start;
pgprot_t pgprot;
if (!pat_enabled)
return 0;
+ /*
+ * For now, only handle remap_pfn_range() vmas where
+ * is_linear_pfn_mapping() == TRUE. Handling of
+ * vm_insert_pfn() is TBD.
+ */
if (is_linear_pfn_mapping(vma)) {
/*
* reserve the whole chunk covered by vma. We need the
* starting address and protection from pte.
*/
- if (follow_phys(vma, vma_start, 0, &prot, &paddr)) {
+ if (follow_phys(vma, vma->vm_start, 0, &prot, &paddr)) {
WARN_ON_ONCE(1);
return -EINVAL;
}
return reserve_pfn_range(paddr, vma_size, &pgprot, 1);
}
- /* reserve entire vma page by page, using pfn and prot from pte */
- for (i = 0; i < vma_size; i += PAGE_SIZE) {
- if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
- continue;
-
- pgprot = __pgprot(prot);
- retval = reserve_pfn_range(paddr, PAGE_SIZE, &pgprot, 1);
- if (retval)
- goto cleanup_ret;
- }
return 0;
-
-cleanup_ret:
- /* Reserve error: Cleanup partial reservation and return error */
- for (j = 0; j < i; j += PAGE_SIZE) {
- if (follow_phys(vma, vma_start + j, 0, &prot, &paddr))
- continue;
-
- free_pfn_range(paddr, PAGE_SIZE);
- }
-
- return retval;
}
/*
* prot is passed in as a parameter for the new mapping. If the vma has a
* linear pfn mapping for the entire range reserve the entire vma range with
* single reserve_pfn_range call.
- * Otherwise, we look t the pfn and size and reserve only the specified range
- * page by page.
- *
- * Note that this function can be called with caller trying to map only a
- * subrange/page inside the vma.
*/
int track_pfn_vma_new(struct vm_area_struct *vma, pgprot_t *prot,
unsigned long pfn, unsigned long size)
{
- int retval = 0;
- unsigned long i, j;
- resource_size_t base_paddr;
resource_size_t paddr;
- unsigned long vma_start = vma->vm_start;
- unsigned long vma_end = vma->vm_end;
- unsigned long vma_size = vma_end - vma_start;
+ unsigned long vma_size = vma->vm_end - vma->vm_start;
if (!pat_enabled)
return 0;
+ /*
+ * For now, only handle remap_pfn_range() vmas where
+ * is_linear_pfn_mapping() == TRUE. Handling of
+ * vm_insert_pfn() is TBD.
+ */
if (is_linear_pfn_mapping(vma)) {
/* reserve the whole chunk starting from vm_pgoff */
paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
return reserve_pfn_range(paddr, vma_size, prot, 0);
}
- /* reserve page by page using pfn and size */
- base_paddr = (resource_size_t)pfn << PAGE_SHIFT;
- for (i = 0; i < size; i += PAGE_SIZE) {
- paddr = base_paddr + i;
- retval = reserve_pfn_range(paddr, PAGE_SIZE, prot, 0);
- if (retval)
- goto cleanup_ret;
- }
return 0;
-
-cleanup_ret:
- /* Reserve error: Cleanup partial reservation and return error */
- for (j = 0; j < i; j += PAGE_SIZE) {
- paddr = base_paddr + j;
- free_pfn_range(paddr, PAGE_SIZE);
- }
-
- return retval;
}
/*
void untrack_pfn_vma(struct vm_area_struct *vma, unsigned long pfn,
unsigned long size)
{
- unsigned long i;
resource_size_t paddr;
- unsigned long prot;
- unsigned long vma_start = vma->vm_start;
- unsigned long vma_end = vma->vm_end;
- unsigned long vma_size = vma_end - vma_start;
+ unsigned long vma_size = vma->vm_end - vma->vm_start;
if (!pat_enabled)
return;
+ /*
+ * For now, only handle remap_pfn_range() vmas where
+ * is_linear_pfn_mapping() == TRUE. Handling of
+ * vm_insert_pfn() is TBD.
+ */
if (is_linear_pfn_mapping(vma)) {
/* free the whole chunk starting from vm_pgoff */
paddr = (resource_size_t)vma->vm_pgoff << PAGE_SHIFT;
free_pfn_range(paddr, vma_size);
return;
}
-
- if (size != 0 && size != vma_size) {
- /* free page by page, using pfn and size */
- paddr = (resource_size_t)pfn << PAGE_SHIFT;
- for (i = 0; i < size; i += PAGE_SIZE) {
- paddr = paddr + i;
- free_pfn_range(paddr, PAGE_SIZE);
- }
- } else {
- /* free entire vma, page by page, using the pfn from pte */
- for (i = 0; i < vma_size; i += PAGE_SIZE) {
- if (follow_phys(vma, vma_start + i, 0, &prot, &paddr))
- continue;
-
- free_pfn_range(paddr, PAGE_SIZE);
- }
- }
}
pgprot_t pgprot_writecombine(pgprot_t prot)
if (num_memory_chunks == 0) {
printk(KERN_WARNING
- "could not finy any ACPI SRAT memory areas.\n");
+ "could not find any ACPI SRAT memory areas.\n");
goto out_fail;
}
static struct acpi_table_slit *acpi_slit;
static nodemask_t nodes_parsed __initdata;
+static nodemask_t cpu_nodes_parsed __initdata;
static struct bootnode nodes[MAX_NUMNODES] __initdata;
static struct bootnode nodes_add[MAX_NUMNODES];
static int found_add_area __initdata;
apic_id = pa->apic_id;
apicid_to_node[apic_id] = node;
+ node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
pxm, apic_id, node);
else
apic_id = pa->apic_id;
apicid_to_node[apic_id] = node;
+ node_set(node, cpu_nodes_parsed);
acpi_numa = 1;
printk(KERN_INFO "SRAT: PXM %u -> APIC %u -> Node %u\n",
pxm, apic_id, node);
{
int i;
node_clear(node, nodes_parsed);
+ node_clear(node, cpu_nodes_parsed);
for (i = 0; i < MAX_LOCAL_APIC; i++) {
if (apicid_to_node[i] == node)
apicid_to_node[i] = NUMA_NO_NODE;
return -1;
}
- node_possible_map = nodes_parsed;
+ /* Account for nodes with cpus and no memory */
+ nodes_or(node_possible_map, nodes_parsed, cpu_nodes_parsed);
/* Finally register nodes */
for_each_node_mask(i, node_possible_map)
static int pci_root_num;
static struct pci_root_info pci_root_info[PCI_ROOT_NR];
-void set_pci_bus_resources_arch_default(struct pci_bus *b)
+void x86_pci_root_bus_res_quirks(struct pci_bus *b)
{
int i;
int j;
struct pci_root_info *info;
+ /* don't go for it if _CRS is used */
+ if (pci_probe & PCI_USE__CRS)
+ return;
+
/* if only one root bus, don't need to anything */
if (pci_root_num < 2)
return;
* are examined.
*/
-void __devinit pcibios_fixup_bus(struct pci_bus *b)
+void __devinit pcibios_fixup_bus(struct pci_bus *b)
{
struct pci_dev *dev;
+ /* root bus? */
+ if (!b->parent)
+ x86_pci_root_bus_res_quirks(b);
pci_read_bridge_bases(b);
list_for_each_entry(dev, &b->devices, bus_list)
pcibios_fixup_device_resources(dev);
*/
fs_initcall(pcibios_assign_resources);
+void __weak x86_pci_root_bus_res_quirks(struct pci_bus *b)
+{
+}
+
/*
* If we set up a device for bus mastering, we need to check the latency
* timer as certain crappy BIOSes forget to set it properly.
if (!fixmem32)
return AE_OK;
if ((mcfg_res->start >= fixmem32->address) &&
- (mcfg_res->end < (fixmem32->address +
+ (mcfg_res->end <= (fixmem32->address +
fixmem32->address_length))) {
mcfg_res->flags = 1;
return AE_CTRL_TERMINATE;
return AE_OK;
if ((mcfg_res->start >= address.minimum) &&
- (mcfg_res->end < (address.minimum + address.address_length))) {
+ (mcfg_res->end <= (address.minimum + address.address_length))) {
mcfg_res->flags = 1;
return AE_CTRL_TERMINATE;
}
u64 old_size = size;
int valid = 0;
- while (!is_reserved(addr, addr + size - 1, E820_RESERVED)) {
+ while (!is_reserved(addr, addr + size, E820_RESERVED)) {
size >>= 1;
if (size < (16UL<<20))
break;
{
long ret;
if (likely(gtod->sysctl_enabled && gtod->clock.vread)) {
- BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
- offsetof(struct timespec, tv_nsec) ||
- sizeof(*tv) != sizeof(struct timespec));
- do_realtime((struct timespec *)tv);
- tv->tv_usec /= 1000;
+ if (likely(tv != NULL)) {
+ BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
+ offsetof(struct timespec, tv_nsec) ||
+ sizeof(*tv) != sizeof(struct timespec));
+ do_realtime((struct timespec *)tv);
+ tv->tv_usec /= 1000;
+ }
if (unlikely(tz != NULL)) {
/* Avoid memcpy. Some old compilers fail to inline it */
tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
#include <asm/xen/hypervisor.h>
#include <asm/fixmap.h>
#include <asm/processor.h>
+#include <asm/proto.h>
#include <asm/msr-index.h>
#include <asm/setup.h>
#include <asm/desc.h>
xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
}
+static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
+static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
+
static void xen_cpuid(unsigned int *ax, unsigned int *bx,
unsigned int *cx, unsigned int *dx)
{
+ unsigned maskecx = ~0;
unsigned maskedx = ~0;
/*
* Mask out inconvenient features, to try and disable as many
* unsupported kernel subsystems as possible.
*/
- if (*ax == 1)
- maskedx = ~((1 << X86_FEATURE_APIC) | /* disable APIC */
- (1 << X86_FEATURE_ACPI) | /* disable ACPI */
- (1 << X86_FEATURE_MCE) | /* disable MCE */
- (1 << X86_FEATURE_MCA) | /* disable MCA */
- (1 << X86_FEATURE_ACC)); /* thermal monitoring */
+ if (*ax == 1) {
+ maskecx = cpuid_leaf1_ecx_mask;
+ maskedx = cpuid_leaf1_edx_mask;
+ }
asm(XEN_EMULATE_PREFIX "cpuid"
: "=a" (*ax),
"=c" (*cx),
"=d" (*dx)
: "0" (*ax), "2" (*cx));
+
+ *cx &= maskecx;
*dx &= maskedx;
}
+static __init void xen_init_cpuid_mask(void)
+{
+ unsigned int ax, bx, cx, dx;
+
+ cpuid_leaf1_edx_mask =
+ ~((1 << X86_FEATURE_MCE) | /* disable MCE */
+ (1 << X86_FEATURE_MCA) | /* disable MCA */
+ (1 << X86_FEATURE_ACC)); /* thermal monitoring */
+
+ if (!xen_initial_domain())
+ cpuid_leaf1_edx_mask &=
+ ~((1 << X86_FEATURE_APIC) | /* disable local APIC */
+ (1 << X86_FEATURE_ACPI)); /* disable ACPI */
+
+ ax = 1;
+ xen_cpuid(&ax, &bx, &cx, &dx);
+
+ /* cpuid claims we support xsave; try enabling it to see what happens */
+ if (cx & (1 << (X86_FEATURE_XSAVE % 32))) {
+ unsigned long cr4;
+
+ set_in_cr4(X86_CR4_OSXSAVE);
+
+ cr4 = read_cr4();
+
+ if ((cr4 & X86_CR4_OSXSAVE) == 0)
+ cpuid_leaf1_ecx_mask &= ~(1 << (X86_FEATURE_XSAVE % 32));
+
+ clear_in_cr4(X86_CR4_OSXSAVE);
+ }
+}
+
static void xen_set_debugreg(int reg, unsigned long val)
{
HYPERVISOR_set_debugreg(reg, val);
static void xen_load_gdt(const struct desc_ptr *dtr)
{
- unsigned long *frames;
unsigned long va = dtr->address;
unsigned int size = dtr->size + 1;
unsigned pages = (size + PAGE_SIZE - 1) / PAGE_SIZE;
+ unsigned long frames[pages];
int f;
- struct multicall_space mcs;
/* A GDT can be up to 64k in size, which corresponds to 8192
8-byte entries, or 16 4k pages.. */
BUG_ON(size > 65536);
BUG_ON(va & ~PAGE_MASK);
- mcs = xen_mc_entry(sizeof(*frames) * pages);
- frames = mcs.args;
-
for (f = 0; va < dtr->address + size; va += PAGE_SIZE, f++) {
- frames[f] = arbitrary_virt_to_mfn((void *)va);
+ int level;
+ pte_t *ptep = lookup_address(va, &level);
+ unsigned long pfn, mfn;
+ void *virt;
+
+ BUG_ON(ptep == NULL);
+
+ pfn = pte_pfn(*ptep);
+ mfn = pfn_to_mfn(pfn);
+ virt = __va(PFN_PHYS(pfn));
+
+ frames[f] = mfn;
make_lowmem_page_readonly((void *)va);
- make_lowmem_page_readonly(mfn_to_virt(frames[f]));
+ make_lowmem_page_readonly(virt);
}
- MULTI_set_gdt(mcs.mc, frames, size / sizeof(struct desc_struct));
-
- xen_mc_issue(PARAVIRT_LAZY_CPU);
+ if (HYPERVISOR_set_gdt(frames, size / sizeof(struct desc_struct)))
+ BUG();
}
static void load_TLS_descriptor(struct thread_struct *t,
static int cvt_gate_to_trap(int vector, const gate_desc *val,
struct trap_info *info)
{
- if (val->type != 0xf && val->type != 0xe)
+ if (val->type != GATE_TRAP && val->type != GATE_INTERRUPT)
return 0;
info->vector = vector;
info->cs = gate_segment(*val);
info->flags = val->dpl;
/* interrupt gates clear IF */
- if (val->type == 0xe)
- info->flags |= 4;
+ if (val->type == GATE_INTERRUPT)
+ info->flags |= 1 << 2;
return 1;
}
.emergency_restart = xen_emergency_restart,
};
-
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
xen_init_irq_ops();
+ xen_init_cpuid_mask();
+
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
+#ifdef CONFIG_X86_64
+ /* Work out if we support NX */
+ check_efer();
+#endif
+
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
}
/* Build the parallel p2m_top_mfn structures */
-void xen_setup_mfn_list_list(void)
+static void __init xen_build_mfn_list_list(void)
{
unsigned pfn, idx;
unsigned topidx = idx * P2M_ENTRIES_PER_PAGE;
p2m_top_mfn_list[idx] = virt_to_mfn(&p2m_top_mfn[topidx]);
}
+}
+void xen_setup_mfn_list_list(void)
+{
BUG_ON(HYPERVISOR_shared_info == &xen_dummy_shared_info);
HYPERVISOR_shared_info->arch.pfn_to_mfn_frame_list_list =
p2m_top[topidx] = &mfn_list[pfn];
}
+
+ xen_build_mfn_list_list();
}
unsigned long get_phys_to_machine(unsigned long pfn)
}
EXPORT_SYMBOL_GPL(get_phys_to_machine);
-static void alloc_p2m(unsigned long **pp, unsigned long *mfnp)
+/* install a new p2m_top page */
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p)
{
- unsigned long *p;
+ unsigned topidx = p2m_top_index(pfn);
+ unsigned long **pfnp, *mfnp;
unsigned i;
- p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
- BUG_ON(p == NULL);
+ pfnp = &p2m_top[topidx];
+ mfnp = &p2m_top_mfn[topidx];
for (i = 0; i < P2M_ENTRIES_PER_PAGE; i++)
p[i] = INVALID_P2M_ENTRY;
- if (cmpxchg(pp, p2m_missing, p) != p2m_missing)
- free_page((unsigned long)p);
- else
+ if (cmpxchg(pfnp, p2m_missing, p) == p2m_missing) {
*mfnp = virt_to_mfn(p);
+ return true;
+ }
+
+ return false;
}
-void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+static void alloc_p2m(unsigned long pfn)
{
- unsigned topidx, idx;
+ unsigned long *p;
- if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
- BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
- return;
- }
+ p = (void *)__get_free_page(GFP_KERNEL | __GFP_NOFAIL);
+ BUG_ON(p == NULL);
+
+ if (!install_p2mtop_page(pfn, p))
+ free_page((unsigned long)p);
+}
+
+/* Try to install p2m mapping; fail if intermediate bits missing */
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ unsigned topidx, idx;
if (unlikely(pfn >= MAX_DOMAIN_PAGES)) {
BUG_ON(mfn != INVALID_P2M_ENTRY);
- return;
+ return true;
}
topidx = p2m_top_index(pfn);
if (p2m_top[topidx] == p2m_missing) {
- /* no need to allocate a page to store an invalid entry */
if (mfn == INVALID_P2M_ENTRY)
- return;
- alloc_p2m(&p2m_top[topidx], &p2m_top_mfn[topidx]);
+ return true;
+ return false;
}
idx = p2m_index(pfn);
p2m_top[topidx][idx] = mfn;
+
+ return true;
+}
+
+void set_phys_to_machine(unsigned long pfn, unsigned long mfn)
+{
+ if (unlikely(xen_feature(XENFEAT_auto_translated_physmap))) {
+ BUG_ON(pfn != mfn && mfn != INVALID_P2M_ENTRY);
+ return;
+ }
+
+ if (unlikely(!__set_phys_to_machine(pfn, mfn))) {
+ alloc_p2m(pfn);
+
+ if (!__set_phys_to_machine(pfn, mfn))
+ BUG();
+ }
}
unsigned long arbitrary_virt_to_mfn(void *vaddr)
return 0;
}
-void __init xen_mark_init_mm_pinned(void)
+static void __init xen_mark_init_mm_pinned(void)
{
xen_pgd_walk(&init_mm, xen_mark_pinned, FIXADDR_TOP);
}
} *args;
struct multicall_space mcs;
- BUG_ON(cpumask_empty(cpus));
- BUG_ON(!mm);
+ if (cpumask_empty(cpus))
+ return; /* nothing to do */
mcs = xen_mc_entry(sizeof(*args));
args = mcs.args;
}
#endif
+static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+{
+ struct mmuext_op op;
+ op.cmd = cmd;
+ op.arg1.mfn = pfn_to_mfn(pfn);
+ if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
+ BUG();
+}
+
/* Early in boot, while setting up the initial pagetable, assume
everything is pinned. */
static __init void xen_alloc_pte_init(struct mm_struct *mm, unsigned long pfn)
{
+#ifdef CONFIG_FLATMEM
+ BUG_ON(mem_map); /* should only be used early */
+#endif
+ make_lowmem_page_readonly(__va(PFN_PHYS(pfn)));
+ pin_pagetable_pfn(MMUEXT_PIN_L1_TABLE, pfn);
+}
+
+/* Used for pmd and pud */
+static __init void xen_alloc_pmd_init(struct mm_struct *mm, unsigned long pfn)
+{
#ifdef CONFIG_FLATMEM
BUG_ON(mem_map); /* should only be used early */
#endif
/* Early release_pte assumes that all pts are pinned, since there's
only init_mm and anything attached to that is pinned. */
-static void xen_release_pte_init(unsigned long pfn)
+static __init void xen_release_pte_init(unsigned long pfn)
{
+ pin_pagetable_pfn(MMUEXT_UNPIN_TABLE, pfn);
make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
-static void pin_pagetable_pfn(unsigned cmd, unsigned long pfn)
+static __init void xen_release_pmd_init(unsigned long pfn)
{
- struct mmuext_op op;
- op.cmd = cmd;
- op.arg1.mfn = pfn_to_mfn(pfn);
- if (HYPERVISOR_mmuext_op(&op, 1, NULL, DOMID_SELF))
- BUG();
+ make_lowmem_page_readwrite(__va(PFN_PHYS(pfn)));
}
/* This needs to make sure the new pte page is pinned iff its being
pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+ reserve_early(__pa(xen_start_info->pt_base),
+ __pa(xen_start_info->pt_base +
+ xen_start_info->nr_pt_frames * PAGE_SIZE),
+ "XEN PAGETABLES");
+
return swapper_pg_dir;
}
#endif /* CONFIG_X86_64 */
#ifdef CONFIG_X86_LOCAL_APIC
case FIX_APIC_BASE: /* maps dummy local APIC */
#endif
+ case FIX_TEXT_POKE0:
+ case FIX_TEXT_POKE1:
+ /* All local page mappings */
pte = pfn_pte(phys, prot);
break;
xen_mark_init_mm_pinned();
}
-
const struct pv_mmu_ops xen_mmu_ops __initdata = {
.pagetable_setup_start = xen_pagetable_setup_start,
.pagetable_setup_done = xen_pagetable_setup_done,
.alloc_pte = xen_alloc_pte_init,
.release_pte = xen_release_pte_init,
- .alloc_pmd = xen_alloc_pte_init,
+ .alloc_pmd = xen_alloc_pmd_init,
.alloc_pmd_clone = paravirt_nop,
- .release_pmd = xen_release_pte_init,
+ .release_pmd = xen_release_pmd_init,
#ifdef CONFIG_HIGHPTE
.kmap_atomic_pte = xen_kmap_atomic_pte,
.make_pud = PV_CALLEE_SAVE(xen_make_pud),
.set_pgd = xen_set_pgd_hyper,
- .alloc_pud = xen_alloc_pte_init,
- .release_pud = xen_release_pte_init,
+ .alloc_pud = xen_alloc_pmd_init,
+ .release_pud = xen_release_pmd_init,
#endif /* PAGETABLE_LEVELS == 4 */
.activate_mm = xen_activate_mm,
};
+bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn);
+bool install_p2mtop_page(unsigned long pfn, unsigned long *p);
+
void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags);
BUG_ON(rc);
while(per_cpu(cpu_state, cpu) != CPU_ONLINE) {
- HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
barrier();
}
/* Make sure other vcpus get a chance to run if they need to. */
for_each_cpu(cpu, mask) {
if (xen_vcpu_stolen(cpu)) {
- HYPERVISOR_sched_op(SCHEDOP_yield, 0);
+ HYPERVISOR_sched_op(SCHEDOP_yield, NULL);
break;
}
}
return ret;
}
+static cycle_t xen_clocksource_get_cycles(struct clocksource *cs)
+{
+ return xen_clocksource_read();
+}
+
static void xen_read_wallclock(struct timespec *ts)
{
struct shared_info *s = HYPERVISOR_shared_info;
static struct clocksource xen_clocksource __read_mostly = {
.name = "xen",
.rating = 400,
- .read = xen_clocksource_read,
+ .read = xen_clocksource_get_cycles,
.mask = ~0,
.mult = 1<<XEN_SHIFT, /* time directly in nanoseconds */
.shift = XEN_SHIFT,
bool xen_vcpu_stolen(int vcpu);
-void xen_mark_init_mm_pinned(void);
-
void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
bool "s6000 - Stretch software configurable processor"
select VARIANT_IRQ_SWITCH
select ARCH_REQUIRE_GPIOLIB
+ select XTENSA_CALIBRATE_CCOUNT
endchoice
config XTENSA_UNALIGNED_USER
source "drivers/pci/Kconfig"
+endmenu
+
menu "Platform options"
choice
config XTENSA_PLATFORM_XT2000
bool "XT2000"
- select XTENSA_CALIBRATE_CCOUNT
- select PCI
help
XT2000 is the name of Tensilica's feature-rich emulation platform.
This hardware is capable of running a full Linux distribution.
source "mm/Kconfig"
-endmenu
-
config HOTPLUG
bool "Support for hot-pluggable devices"
help
CONFIG_PREEMPT=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_HIGHMEM is not set
-# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_XTENSA_ISS_NETWORK is not set
# CONFIG_XTENSA_PLATFORM_ISS is not set
# CONFIG_XTENSA_PLATFORM_XT2000 is not set
CONFIG_XTENSA_PLATFORM_S6105=y
-CONFIG_XTENSA_CPU_CLOCK=300
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7"
are modified, we must also specify them as outputs, or gcc
will assume they contain their original values. */
: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr)
- : "1" (iph), "2" (ihl));
+ : "1" (iph), "2" (ihl)
+ : "memory");
return csum_fold(sum);
}
"1:\t"
: "=r" (sum), "=&r" (__dummy)
: "r" (saddr), "r" (daddr),
- "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+ "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+ : "memory");
return csum_fold(sum);
}
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
extern unsigned long ccount_per_jiffy;
-extern unsigned long ccount_nsec;
+extern unsigned long nsec_per_ccount;
#define CCOUNT_PER_JIFFY ccount_per_jiffy
-#define NSEC_PER_CCOUNT ccount_nsec
+#define NSEC_PER_CCOUNT nsec_per_ccount
#else
#define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
#define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK)
extra-y := head.o vmlinux.lds
-
obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \
pci-dma.o init_task.o io.o
-## windowspill.o
-
obj-$(CONFIG_KGDB) += xtensa-stub.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
+# In the Xtensa architecture, assembly generates literals which must always
+# precede the L32R instruction with a relative offset less than 256 kB.
+# Therefore, the .text and .literal section must be combined in parenthesis
+# in the linker script, such as: *(.literal .text).
+#
+# We need to post-process the generated vmlinux.lds scripts to convert
+# *(xxx.text) to *(xxx.literal xxx.text) for the following text sections:
+# .text .ref.text .*init.text .*exit.text .text.*
+#
+# Replicate rules in scripts/Makefile.build
+
+sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g' \
+ -e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
+
+quiet_cmd__cpp_lds_S = LDS $@
+ cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
+$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
+ $(call if_changed_dep,_cpp_lds_S)
#include <asm/page.h>
#include <asm/cacheasm.h>
+#include <linux/init.h>
#include <linux/linkage.h>
/*
* instruction.
*/
- .section .head.text, "ax"
+ __HEAD
.globl _start
_start: _j 2f
.align 4
regs->syscall);
}
+static __always_inline unsigned long *stack_pointer(struct task_struct *task)
+{
+ unsigned long *sp;
+
+ if (!task || task == current)
+ __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+ else
+ sp = (unsigned long *)task->thread.sp;
+
+ return sp;
+}
+
void show_trace(struct task_struct *task, unsigned long *sp)
{
unsigned long a0, a1, pc;
if (sp)
a1 = (unsigned long)sp;
else
- a1 = task->thread.sp;
+ a1 = (unsigned long)stack_pointer(task);
sp_start = a1 & ~(THREAD_SIZE-1);
sp_end = sp_start + THREAD_SIZE;
unsigned long *stack;
if (!sp)
- sp = (unsigned long *)task->thread.sp;
+ sp = stack_pointer(task);
stack = sp;
printk("\nStack: ");
.text :
{
- /* The .head.text section must be the first section! */
- *(.head.text)
- *(.literal .text)
+ /* The HEAD_TEXT section must be the first section! */
+ HEAD_TEXT
+ TEXT_TEXT
VMLINUX_SYMBOL(__sched_text_start) = .;
*(.sched.literal .sched.text)
VMLINUX_SYMBOL(__sched_text_end) = .;
__init_begin = .;
.init.text : {
_sinittext = .;
- *(.init.literal) *(.cpuinit.literal)
- *(.devinit.literal) *(.meminit.literal)
INIT_TEXT
_einittext = .;
}
#include <asm/bootparam.h>
#include <variant/hardware.h>
+#include <variant/gpio.h>
+
#include <platform/gpio.h>
void platform_halt(void)
void __init platform_init(bp_tag_t *first)
{
+ s6_gpio_init();
gpio_request(GPIO_LED1_NGREEN, "led1_green");
gpio_request(GPIO_LED1_RED, "led1_red");
gpio_direction_output(GPIO_LED1_NGREEN, 1);
# s6000 Makefile
obj-y += irq.o gpio.o
+obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT) += delay.o
--- /dev/null
+#include <asm/delay.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <variant/hardware.h>
+
+#define LOOPS 10
+void platform_calibrate_ccount(void)
+{
+ u32 uninitialized_var(a);
+ u32 uninitialized_var(u);
+ u32 b;
+ u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER;
+ int i = LOOPS+1;
+ do {
+ u32 t = u;
+ asm volatile(
+ "1: l32i %0, %2, 0 ;"
+ " beq %0, %1, 1b ;"
+ : "=&a"(u) : "a"(t), "a"(tstamp));
+ b = xtensa_get_ccount();
+ if (i == LOOPS)
+ a = b;
+ } while (--i >= 0);
+ b -= a;
+ nsec_per_ccount = (LOOPS * 10000) / b;
+ ccount_per_jiffy = b * (100000UL / (LOOPS * HZ));
+}
.exported = 0, /* no exporting to userspace */
};
-static int gpio_init(void)
+int s6_gpio_init(void)
{
return gpiochip_add(&gpiochip);
}
-device_initcall(gpio_init);
--- /dev/null
+#ifndef _XTENSA_VARIANT_S6000_GPIO_H
+#define _XTENSA_VARIANT_S6000_GPIO_H
+
+extern int s6_gpio_init(void);
+
+#endif /* _XTENSA_VARIANT_S6000_GPIO_H */
#include <linux/rbtree.h>
#include <linux/interrupt.h>
-#define REQ_SYNC 1
-#define REQ_ASYNC 0
-
/*
* See Documentation/block/as-iosched.txt
*/
struct list_head fifo_list[2];
struct request *next_rq[2]; /* next in sort order */
- sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */
+ sector_t last_sector[2]; /* last SYNC & ASYNC sectors */
unsigned long exit_prob; /* probability a task will exit while
being waited on */
unsigned long last_check_fifo[2];
int changed_batch; /* 1: waiting for old batch to end */
int new_batch; /* 1: waiting on first read complete */
- int batch_data_dir; /* current batch REQ_SYNC / REQ_ASYNC */
+ int batch_data_dir; /* current batch SYNC / ASYNC */
int write_batch_count; /* max # of reqs in a write batch */
int current_write_count; /* how many requests left this batch */
int write_batch_idled; /* has the write batch gone idle? */
if (aic == NULL)
return;
- if (data_dir == REQ_SYNC) {
+ if (data_dir == BLK_RW_SYNC) {
unsigned long in_flight = atomic_read(&aic->nr_queued)
+ atomic_read(&aic->nr_dispatched);
spin_lock(&aic->lock);
*/
static void update_write_batch(struct as_data *ad)
{
- unsigned long batch = ad->batch_expire[REQ_ASYNC];
+ unsigned long batch = ad->batch_expire[BLK_RW_ASYNC];
long write_time;
write_time = (jiffies - ad->current_batch_expires) + batch;
kblockd_schedule_work(q, &ad->antic_work);
ad->changed_batch = 0;
- if (ad->batch_data_dir == REQ_SYNC)
+ if (ad->batch_data_dir == BLK_RW_SYNC)
ad->new_batch = 1;
}
WARN_ON(ad->nr_dispatched == 0);
if (ad->new_batch && ad->batch_data_dir == rq_is_sync(rq)) {
update_write_batch(ad);
ad->current_batch_expires = jiffies +
- ad->batch_expire[REQ_SYNC];
+ ad->batch_expire[BLK_RW_SYNC];
ad->new_batch = 0;
}
if (ad->changed_batch || ad->new_batch)
return 0;
- if (ad->batch_data_dir == REQ_SYNC)
+ if (ad->batch_data_dir == BLK_RW_SYNC)
/* TODO! add a check so a complete fifo gets written? */
return time_after(jiffies, ad->current_batch_expires);
*/
ad->last_sector[data_dir] = rq->sector + rq->nr_sectors;
- if (data_dir == REQ_SYNC) {
+ if (data_dir == BLK_RW_SYNC) {
struct io_context *ioc = RQ_IOC(rq);
/* In case we have to anticipate after this */
copy_io_context(&ad->io_context, &ioc);
static int as_dispatch_request(struct request_queue *q, int force)
{
struct as_data *ad = q->elevator->elevator_data;
- const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]);
- const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]);
+ const int reads = !list_empty(&ad->fifo_list[BLK_RW_SYNC]);
+ const int writes = !list_empty(&ad->fifo_list[BLK_RW_ASYNC]);
struct request *rq;
if (unlikely(force)) {
/*
* Forced dispatch, accounting is useless. Reset
* accounting states and dump fifo_lists. Note that
- * batch_data_dir is reset to REQ_SYNC to avoid
+ * batch_data_dir is reset to BLK_RW_SYNC to avoid
* screwing write batch accounting as write batch
* accounting occurs on W->R transition.
*/
int dispatched = 0;
- ad->batch_data_dir = REQ_SYNC;
+ ad->batch_data_dir = BLK_RW_SYNC;
ad->changed_batch = 0;
ad->new_batch = 0;
- while (ad->next_rq[REQ_SYNC]) {
- as_move_to_dispatch(ad, ad->next_rq[REQ_SYNC]);
+ while (ad->next_rq[BLK_RW_SYNC]) {
+ as_move_to_dispatch(ad, ad->next_rq[BLK_RW_SYNC]);
dispatched++;
}
- ad->last_check_fifo[REQ_SYNC] = jiffies;
+ ad->last_check_fifo[BLK_RW_SYNC] = jiffies;
- while (ad->next_rq[REQ_ASYNC]) {
- as_move_to_dispatch(ad, ad->next_rq[REQ_ASYNC]);
+ while (ad->next_rq[BLK_RW_ASYNC]) {
+ as_move_to_dispatch(ad, ad->next_rq[BLK_RW_ASYNC]);
dispatched++;
}
- ad->last_check_fifo[REQ_ASYNC] = jiffies;
+ ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
return dispatched;
}
/* Signal that the write batch was uncontended, so we can't time it */
- if (ad->batch_data_dir == REQ_ASYNC && !reads) {
+ if (ad->batch_data_dir == BLK_RW_ASYNC && !reads) {
if (ad->current_write_count == 0 || !writes)
ad->write_batch_idled = 1;
}
*/
rq = ad->next_rq[ad->batch_data_dir];
- if (ad->batch_data_dir == REQ_SYNC && ad->antic_expire) {
- if (as_fifo_expired(ad, REQ_SYNC))
+ if (ad->batch_data_dir == BLK_RW_SYNC && ad->antic_expire) {
+ if (as_fifo_expired(ad, BLK_RW_SYNC))
goto fifo_expired;
if (as_can_anticipate(ad, rq)) {
/* we have a "next request" */
if (reads && !writes)
ad->current_batch_expires =
- jiffies + ad->batch_expire[REQ_SYNC];
+ jiffies + ad->batch_expire[BLK_RW_SYNC];
goto dispatch_request;
}
}
*/
if (reads) {
- BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_SYNC]));
+ BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_SYNC]));
- if (writes && ad->batch_data_dir == REQ_SYNC)
+ if (writes && ad->batch_data_dir == BLK_RW_SYNC)
/*
* Last batch was a read, switch to writes
*/
goto dispatch_writes;
- if (ad->batch_data_dir == REQ_ASYNC) {
+ if (ad->batch_data_dir == BLK_RW_ASYNC) {
WARN_ON(ad->new_batch);
ad->changed_batch = 1;
}
- ad->batch_data_dir = REQ_SYNC;
- rq = rq_entry_fifo(ad->fifo_list[REQ_SYNC].next);
+ ad->batch_data_dir = BLK_RW_SYNC;
+ rq = rq_entry_fifo(ad->fifo_list[BLK_RW_SYNC].next);
ad->last_check_fifo[ad->batch_data_dir] = jiffies;
goto dispatch_request;
}
if (writes) {
dispatch_writes:
- BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[REQ_ASYNC]));
+ BUG_ON(RB_EMPTY_ROOT(&ad->sort_list[BLK_RW_ASYNC]));
- if (ad->batch_data_dir == REQ_SYNC) {
+ if (ad->batch_data_dir == BLK_RW_SYNC) {
ad->changed_batch = 1;
/*
*/
ad->new_batch = 0;
}
- ad->batch_data_dir = REQ_ASYNC;
+ ad->batch_data_dir = BLK_RW_ASYNC;
ad->current_write_count = ad->write_batch_count;
ad->write_batch_idled = 0;
- rq = rq_entry_fifo(ad->fifo_list[REQ_ASYNC].next);
- ad->last_check_fifo[REQ_ASYNC] = jiffies;
+ rq = rq_entry_fifo(ad->fifo_list[BLK_RW_ASYNC].next);
+ ad->last_check_fifo[BLK_RW_ASYNC] = jiffies;
goto dispatch_request;
}
if (ad->nr_dispatched)
return 0;
- if (ad->batch_data_dir == REQ_ASYNC)
+ if (ad->batch_data_dir == BLK_RW_ASYNC)
ad->current_batch_expires = jiffies +
- ad->batch_expire[REQ_ASYNC];
+ ad->batch_expire[BLK_RW_ASYNC];
else
ad->new_batch = 1;
{
struct as_data *ad = q->elevator->elevator_data;
- return list_empty(&ad->fifo_list[REQ_ASYNC])
- && list_empty(&ad->fifo_list[REQ_SYNC]);
+ return list_empty(&ad->fifo_list[BLK_RW_ASYNC])
+ && list_empty(&ad->fifo_list[BLK_RW_SYNC]);
}
static int
del_timer_sync(&ad->antic_timer);
cancel_work_sync(&ad->antic_work);
- BUG_ON(!list_empty(&ad->fifo_list[REQ_SYNC]));
- BUG_ON(!list_empty(&ad->fifo_list[REQ_ASYNC]));
+ BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_SYNC]));
+ BUG_ON(!list_empty(&ad->fifo_list[BLK_RW_ASYNC]));
put_io_context(ad->io_context);
kfree(ad);
init_timer(&ad->antic_timer);
INIT_WORK(&ad->antic_work, as_work_handler);
- INIT_LIST_HEAD(&ad->fifo_list[REQ_SYNC]);
- INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]);
- ad->sort_list[REQ_SYNC] = RB_ROOT;
- ad->sort_list[REQ_ASYNC] = RB_ROOT;
- ad->fifo_expire[REQ_SYNC] = default_read_expire;
- ad->fifo_expire[REQ_ASYNC] = default_write_expire;
+ INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_SYNC]);
+ INIT_LIST_HEAD(&ad->fifo_list[BLK_RW_ASYNC]);
+ ad->sort_list[BLK_RW_SYNC] = RB_ROOT;
+ ad->sort_list[BLK_RW_ASYNC] = RB_ROOT;
+ ad->fifo_expire[BLK_RW_SYNC] = default_read_expire;
+ ad->fifo_expire[BLK_RW_ASYNC] = default_write_expire;
ad->antic_expire = default_antic_expire;
- ad->batch_expire[REQ_SYNC] = default_read_batch_expire;
- ad->batch_expire[REQ_ASYNC] = default_write_batch_expire;
+ ad->batch_expire[BLK_RW_SYNC] = default_read_batch_expire;
+ ad->batch_expire[BLK_RW_ASYNC] = default_write_batch_expire;
- ad->current_batch_expires = jiffies + ad->batch_expire[REQ_SYNC];
- ad->write_batch_count = ad->batch_expire[REQ_ASYNC] / 10;
+ ad->current_batch_expires = jiffies + ad->batch_expire[BLK_RW_SYNC];
+ ad->write_batch_count = ad->batch_expire[BLK_RW_ASYNC] / 10;
if (ad->write_batch_count < 2)
ad->write_batch_count = 2;
struct as_data *ad = e->elevator_data; \
return as_var_show(jiffies_to_msecs((__VAR)), (page)); \
}
-SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_expire_show, ad->fifo_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_expire_show, ad->fifo_expire[BLK_RW_ASYNC]);
SHOW_FUNCTION(as_antic_expire_show, ad->antic_expire);
-SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[REQ_SYNC]);
-SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[REQ_ASYNC]);
+SHOW_FUNCTION(as_read_batch_expire_show, ad->batch_expire[BLK_RW_SYNC]);
+SHOW_FUNCTION(as_write_batch_expire_show, ad->batch_expire[BLK_RW_ASYNC]);
#undef SHOW_FUNCTION
#define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX) \
*(__PTR) = msecs_to_jiffies(*(__PTR)); \
return ret; \
}
-STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[REQ_SYNC], 0, INT_MAX);
-STORE_FUNCTION(as_write_expire_store, &ad->fifo_expire[REQ_ASYNC], 0, INT_MAX);
+STORE_FUNCTION(as_read_expire_store, &ad->fifo_expire[BLK_RW_SYNC], 0, INT_MAX);
+STORE_FUNCTION(as_write_expire_store,
+ &ad->fifo_expire[BLK_RW_ASYNC], 0, INT_MAX);
STORE_FUNCTION(as_antic_expire_store, &ad->antic_expire, 0, INT_MAX);
STORE_FUNCTION(as_read_batch_expire_store,
- &ad->batch_expire[REQ_SYNC], 0, INT_MAX);
+ &ad->batch_expire[BLK_RW_SYNC], 0, INT_MAX);
STORE_FUNCTION(as_write_batch_expire_store,
- &ad->batch_expire[REQ_ASYNC], 0, INT_MAX);
+ &ad->batch_expire[BLK_RW_ASYNC], 0, INT_MAX);
#undef STORE_FUNCTION
#define AS_ATTR(name) \
return -ENXIO;
bio = bio_alloc(GFP_KERNEL, 0);
- if (!bio)
- return -ENOMEM;
-
bio->bi_end_io = bio_end_empty_barrier;
bio->bi_private = &wait;
bio->bi_bdev = bdev;
}
static struct request *
-blk_alloc_request(struct request_queue *q, int rw, int priv, gfp_t gfp_mask)
+blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask)
{
struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
blk_rq_init(q, rq);
- rq->cmd_flags = rw | REQ_ALLOCED;
+ rq->cmd_flags = flags | REQ_ALLOCED;
if (priv) {
if (unlikely(elv_set_request(q, rq, gfp_mask))) {
if (priv)
rl->elvpriv++;
+ if (blk_queue_io_stat(q))
+ rw_flags |= REQ_IO_STAT;
spin_unlock_irq(q->queue_lock);
rq = blk_alloc_request(q, rw_flags, priv, gfp_mask);
} else {
int idx = bio->bi_idx + next_idx;
- if (unlikely(bio->bi_idx >= bio->bi_vcnt)) {
+ if (unlikely(idx >= bio->bi_vcnt)) {
blk_dump_rq_flags(req, "__end_that");
printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
- __func__, bio->bi_idx, bio->bi_vcnt);
+ __func__, idx, bio->bi_vcnt);
break;
}
elv_merge_requests(q, req, next);
- blk_account_io_merge(req);
+ /*
+ * 'next' is going away, so update stats accordingly
+ */
+ blk_account_io_merge(next);
req->ioprio = ioprio_best(req->ioprio, next->ioprio);
if (blk_rq_cpu_valid(next))
/**
* blk_queue_bounce_limit - set bounce buffer limit for queue
- * @q: the request queue for the device
- * @dma_addr: bus address limit
+ * @q: the request queue for the device
+ * @dma_mask: the maximum address the device can handle
*
* Description:
* Different hardware can have different requirements as to what pages
* it can do I/O directly to. A low level driver can call
* blk_queue_bounce_limit to have lower memory pages allocated as bounce
- * buffers for doing I/O to pages residing above @dma_addr.
+ * buffers for doing I/O to pages residing above @dma_mask.
**/
-void blk_queue_bounce_limit(struct request_queue *q, u64 dma_addr)
+void blk_queue_bounce_limit(struct request_queue *q, u64 dma_mask)
{
- unsigned long b_pfn = dma_addr >> PAGE_SHIFT;
+ unsigned long b_pfn = dma_mask >> PAGE_SHIFT;
int dma = 0;
q->bounce_gfp = GFP_NOIO;
#if BITS_PER_LONG == 64
- /* Assume anything <= 4GB can be handled by IOMMU.
- Actually some IOMMUs can handle everything, but I don't
- know of a way to test this here. */
- if (b_pfn < (min_t(u64, 0x100000000UL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
+ /*
+ * Assume anything <= 4GB can be handled by IOMMU. Actually
+ * some IOMMUs can handle everything, but I don't know of a
+ * way to test this here.
+ */
+ if (b_pfn < (min_t(u64, 0xffffffffUL, BLK_BOUNCE_HIGH) >> PAGE_SHIFT))
dma = 1;
q->bounce_pfn = max_low_pfn;
#else
ssize_t ret = queue_var_store(&stats, page, count);
spin_lock_irq(q->queue_lock);
- elv_quisce_start(q);
-
if (stats)
queue_flag_set(QUEUE_FLAG_IO_STAT, q);
else
queue_flag_clear(QUEUE_FLAG_IO_STAT, q);
-
- elv_quisce_end(q);
spin_unlock_irq(q->queue_lock);
return ret;
struct request *rq, *tmp;
LIST_HEAD(list);
+ /*
+ * Not a request based block device, nothing to abort
+ */
+ if (!q->request_fn)
+ return;
+
spin_lock_irqsave(q->queue_lock, flags);
elv_abort_queue(q);
list_for_each_entry_safe(rq, tmp, &list, timeout_list)
blk_abort_request(rq);
+ /*
+ * Occasionally, blk_abort_request() will return without
+ * deleting the element from the list. Make sure we add those back
+ * instead of leaving them on the local stack list.
+ */
+ list_splice(&list, &q->timeout_list);
+
spin_unlock_irqrestore(q->queue_lock, flags);
}
int blk_dev_init(void);
-void elv_quisce_start(struct request_queue *q);
-void elv_quisce_end(struct request_queue *q);
+void elv_quiesce_start(struct request_queue *q);
+void elv_quiesce_end(struct request_queue *q);
/*
static inline int blk_do_io_stat(struct request *rq)
{
- struct gendisk *disk = rq->rq_disk;
-
- if (!disk || !disk->queue)
- return 0;
-
- return blk_queue_io_stat(disk->queue) && (rq->cmd_flags & REQ_ELVPRIV);
+ return rq->rq_disk && blk_rq_io_stat(rq);
}
#endif
#define cfq_class_idle(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_IDLE)
#define cfq_class_rt(cfqq) ((cfqq)->ioprio_class == IOPRIO_CLASS_RT)
-#define ASYNC (0)
-#define SYNC (1)
-
#define sample_valid(samples) ((samples) > 80)
/*
* rr list of queues with requests and the count of them
*/
struct cfq_rb_root service_tree;
+
+ /*
+ * Each priority tree is sorted by next_request position. These
+ * trees are used when determining if two or more queues are
+ * interleaving requests (see cfq_close_cooperator).
+ */
+ struct rb_root prio_trees[CFQ_PRIO_LISTS];
+
unsigned int busy_queues;
/*
* Used to track any pending rt requests so we can pre-empt current
struct rb_node rb_node;
/* service_tree key */
unsigned long rb_key;
+ /* prio tree member */
+ struct rb_node p_node;
+ /* prio tree root we belong to, if any */
+ struct rb_root *p_root;
/* sorted list of pending requests */
struct rb_root sort_list;
/* if fifo isn't expired, next request to serve */
CFQ_CFQQ_FLAG_prio_changed, /* task priority has changed */
CFQ_CFQQ_FLAG_slice_new, /* no requests dispatched in slice */
CFQ_CFQQ_FLAG_sync, /* synchronous queue */
+ CFQ_CFQQ_FLAG_coop, /* has done a coop jump of the queue */
};
#define CFQ_CFQQ_FNS(name) \
CFQ_CFQQ_FNS(prio_changed);
CFQ_CFQQ_FNS(slice_new);
CFQ_CFQQ_FNS(sync);
+CFQ_CFQQ_FNS(coop);
#undef CFQ_CFQQ_FNS
#define cfq_log_cfqq(cfqd, cfqq, fmt, args...) \
return NULL;
}
+static void rb_erase_init(struct rb_node *n, struct rb_root *root)
+{
+ rb_erase(n, root);
+ RB_CLEAR_NODE(n);
+}
+
static void cfq_rb_erase(struct rb_node *n, struct cfq_rb_root *root)
{
if (root->left == n)
root->left = NULL;
-
- rb_erase(n, &root->rb);
- RB_CLEAR_NODE(n);
+ rb_erase_init(n, &root->rb);
}
/*
* requests waiting to be processed. It is sorted in the order that
* we will service the queues.
*/
-static void cfq_service_tree_add(struct cfq_data *cfqd,
- struct cfq_queue *cfqq, int add_front)
+static void cfq_service_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq,
+ int add_front)
{
struct rb_node **p, *parent;
struct cfq_queue *__cfqq;
rb_insert_color(&cfqq->rb_node, &cfqd->service_tree.rb);
}
+static struct cfq_queue *
+cfq_prio_tree_lookup(struct cfq_data *cfqd, struct rb_root *root,
+ sector_t sector, struct rb_node **ret_parent,
+ struct rb_node ***rb_link)
+{
+ struct rb_node **p, *parent;
+ struct cfq_queue *cfqq = NULL;
+
+ parent = NULL;
+ p = &root->rb_node;
+ while (*p) {
+ struct rb_node **n;
+
+ parent = *p;
+ cfqq = rb_entry(parent, struct cfq_queue, p_node);
+
+ /*
+ * Sort strictly based on sector. Smallest to the left,
+ * largest to the right.
+ */
+ if (sector > cfqq->next_rq->sector)
+ n = &(*p)->rb_right;
+ else if (sector < cfqq->next_rq->sector)
+ n = &(*p)->rb_left;
+ else
+ break;
+ p = n;
+ cfqq = NULL;
+ }
+
+ *ret_parent = parent;
+ if (rb_link)
+ *rb_link = p;
+ return cfqq;
+}
+
+static void cfq_prio_tree_add(struct cfq_data *cfqd, struct cfq_queue *cfqq)
+{
+ struct rb_node **p, *parent;
+ struct cfq_queue *__cfqq;
+
+ if (cfqq->p_root) {
+ rb_erase(&cfqq->p_node, cfqq->p_root);
+ cfqq->p_root = NULL;
+ }
+
+ if (cfq_class_idle(cfqq))
+ return;
+ if (!cfqq->next_rq)
+ return;
+
+ cfqq->p_root = &cfqd->prio_trees[cfqq->org_ioprio];
+ __cfqq = cfq_prio_tree_lookup(cfqd, cfqq->p_root, cfqq->next_rq->sector,
+ &parent, &p);
+ if (!__cfqq) {
+ rb_link_node(&cfqq->p_node, parent, p);
+ rb_insert_color(&cfqq->p_node, cfqq->p_root);
+ } else
+ cfqq->p_root = NULL;
+}
+
/*
* Update cfqq's position in the service tree.
*/
/*
* Resorting requires the cfqq to be on the RR list already.
*/
- if (cfq_cfqq_on_rr(cfqq))
+ if (cfq_cfqq_on_rr(cfqq)) {
cfq_service_tree_add(cfqd, cfqq, 0);
+ cfq_prio_tree_add(cfqd, cfqq);
+ }
}
/*
if (!RB_EMPTY_NODE(&cfqq->rb_node))
cfq_rb_erase(&cfqq->rb_node, &cfqd->service_tree);
+ if (cfqq->p_root) {
+ rb_erase(&cfqq->p_node, cfqq->p_root);
+ cfqq->p_root = NULL;
+ }
BUG_ON(!cfqd->busy_queues);
cfqd->busy_queues--;
{
struct cfq_queue *cfqq = RQ_CFQQ(rq);
struct cfq_data *cfqd = cfqq->cfqd;
- struct request *__alias;
+ struct request *__alias, *prev;
cfqq->queued[rq_is_sync(rq)]++;
/*
* check if this request is a better next-serve candidate
*/
+ prev = cfqq->next_rq;
cfqq->next_rq = cfq_choose_req(cfqd, cfqq->next_rq, rq);
+
+ /*
+ * adjust priority tree position, if ->next_rq changes
+ */
+ if (prev != cfqq->next_rq)
+ cfq_prio_tree_add(cfqd, cfqq);
+
BUG_ON(!cfqq->next_rq);
}
/*
* Get and set a new active queue for service.
*/
-static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd)
+static struct cfq_queue *cfq_set_active_queue(struct cfq_data *cfqd,
+ struct cfq_queue *cfqq)
{
- struct cfq_queue *cfqq;
+ if (!cfqq) {
+ cfqq = cfq_get_next_queue(cfqd);
+ if (cfqq)
+ cfq_clear_cfqq_coop(cfqq);
+ }
- cfqq = cfq_get_next_queue(cfqd);
__cfq_set_active_queue(cfqd, cfqq);
return cfqq;
}
return cfqd->last_position - rq->sector;
}
+#define CIC_SEEK_THR 8 * 1024
+#define CIC_SEEKY(cic) ((cic)->seek_mean > CIC_SEEK_THR)
+
static inline int cfq_rq_close(struct cfq_data *cfqd, struct request *rq)
{
struct cfq_io_context *cic = cfqd->active_cic;
+ sector_t sdist = cic->seek_mean;
if (!sample_valid(cic->seek_samples))
- return 0;
+ sdist = CIC_SEEK_THR;
+
+ return cfq_dist_from_last(cfqd, rq) <= sdist;
+}
+
+static struct cfq_queue *cfqq_close(struct cfq_data *cfqd,
+ struct cfq_queue *cur_cfqq)
+{
+ struct rb_root *root = &cfqd->prio_trees[cur_cfqq->org_ioprio];
+ struct rb_node *parent, *node;
+ struct cfq_queue *__cfqq;
+ sector_t sector = cfqd->last_position;
+
+ if (RB_EMPTY_ROOT(root))
+ return NULL;
+
+ /*
+ * First, if we find a request starting at the end of the last
+ * request, choose it.
+ */
+ __cfqq = cfq_prio_tree_lookup(cfqd, root, sector, &parent, NULL);
+ if (__cfqq)
+ return __cfqq;
+
+ /*
+ * If the exact sector wasn't found, the parent of the NULL leaf
+ * will contain the closest sector.
+ */
+ __cfqq = rb_entry(parent, struct cfq_queue, p_node);
+ if (cfq_rq_close(cfqd, __cfqq->next_rq))
+ return __cfqq;
+
+ if (__cfqq->next_rq->sector < sector)
+ node = rb_next(&__cfqq->p_node);
+ else
+ node = rb_prev(&__cfqq->p_node);
+ if (!node)
+ return NULL;
- return cfq_dist_from_last(cfqd, rq) <= cic->seek_mean;
+ __cfqq = rb_entry(node, struct cfq_queue, p_node);
+ if (cfq_rq_close(cfqd, __cfqq->next_rq))
+ return __cfqq;
+
+ return NULL;
}
-static int cfq_close_cooperator(struct cfq_data *cfq_data,
- struct cfq_queue *cfqq)
+/*
+ * cfqd - obvious
+ * cur_cfqq - passed in so that we don't decide that the current queue is
+ * closely cooperating with itself.
+ *
+ * So, basically we're assuming that that cur_cfqq has dispatched at least
+ * one request, and that cfqd->last_position reflects a position on the disk
+ * associated with the I/O issued by cur_cfqq. I'm not sure this is a valid
+ * assumption.
+ */
+static struct cfq_queue *cfq_close_cooperator(struct cfq_data *cfqd,
+ struct cfq_queue *cur_cfqq,
+ int probe)
{
+ struct cfq_queue *cfqq;
+
+ /*
+ * A valid cfq_io_context is necessary to compare requests against
+ * the seek_mean of the current cfqq.
+ */
+ if (!cfqd->active_cic)
+ return NULL;
+
/*
* We should notice if some of the queues are cooperating, eg
* working closely on the same area of the disk. In that case,
* we can group them together and don't waste time idling.
*/
- return 0;
-}
+ cfqq = cfqq_close(cfqd, cur_cfqq);
+ if (!cfqq)
+ return NULL;
-#define CIC_SEEKY(cic) ((cic)->seek_mean > (8 * 1024))
+ if (cfq_cfqq_coop(cfqq))
+ return NULL;
+
+ if (!probe)
+ cfq_mark_cfqq_coop(cfqq);
+ return cfqq;
+}
static void cfq_arm_slice_timer(struct cfq_data *cfqd)
{
if (!cic || !atomic_read(&cic->ioc->nr_tasks))
return;
- /*
- * See if this prio level has a good candidate
- */
- if (cfq_close_cooperator(cfqd, cfqq) &&
- (sample_valid(cic->ttime_samples) && cic->ttime_mean > 2))
- return;
-
cfq_mark_cfqq_wait_request(cfqq);
/*
sl = min(sl, msecs_to_jiffies(CFQ_MIN_TT));
mod_timer(&cfqd->idle_slice_timer, jiffies + sl);
- cfq_log(cfqd, "arm_idle: %lu", sl);
+ cfq_log_cfqq(cfqd, cfqq, "arm_idle: %lu", sl);
}
/*
*/
static struct cfq_queue *cfq_select_queue(struct cfq_data *cfqd)
{
- struct cfq_queue *cfqq;
+ struct cfq_queue *cfqq, *new_cfqq = NULL;
cfqq = cfqd->active_queue;
if (!cfqq)
if (!RB_EMPTY_ROOT(&cfqq->sort_list))
goto keep_queue;
+ /*
+ * If another queue has a request waiting within our mean seek
+ * distance, let it run. The expire code will check for close
+ * cooperators and put the close queue at the front of the service
+ * tree.
+ */
+ new_cfqq = cfq_close_cooperator(cfqd, cfqq, 0);
+ if (new_cfqq)
+ goto expire;
+
/*
* No requests pending. If the active queue still has requests in
* flight or is idling for a new request, allow either of these
expire:
cfq_slice_expired(cfqd, 0);
new_queue:
- cfqq = cfq_set_active_queue(cfqd);
+ cfqq = cfq_set_active_queue(cfqd, new_cfqq);
keep_queue:
return cfqq;
}
if (ioc->ioc_data == cic)
rcu_assign_pointer(ioc->ioc_data, NULL);
- if (cic->cfqq[ASYNC]) {
- cfq_exit_cfqq(cfqd, cic->cfqq[ASYNC]);
- cic->cfqq[ASYNC] = NULL;
+ if (cic->cfqq[BLK_RW_ASYNC]) {
+ cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_ASYNC]);
+ cic->cfqq[BLK_RW_ASYNC] = NULL;
}
- if (cic->cfqq[SYNC]) {
- cfq_exit_cfqq(cfqd, cic->cfqq[SYNC]);
- cic->cfqq[SYNC] = NULL;
+ if (cic->cfqq[BLK_RW_SYNC]) {
+ cfq_exit_cfqq(cfqd, cic->cfqq[BLK_RW_SYNC]);
+ cic->cfqq[BLK_RW_SYNC] = NULL;
}
}
spin_lock_irqsave(cfqd->queue->queue_lock, flags);
- cfqq = cic->cfqq[ASYNC];
+ cfqq = cic->cfqq[BLK_RW_ASYNC];
if (cfqq) {
struct cfq_queue *new_cfqq;
- new_cfqq = cfq_get_queue(cfqd, ASYNC, cic->ioc, GFP_ATOMIC);
+ new_cfqq = cfq_get_queue(cfqd, BLK_RW_ASYNC, cic->ioc,
+ GFP_ATOMIC);
if (new_cfqq) {
- cic->cfqq[ASYNC] = new_cfqq;
+ cic->cfqq[BLK_RW_ASYNC] = new_cfqq;
cfq_put_queue(cfqq);
}
}
- cfqq = cic->cfqq[SYNC];
+ cfqq = cic->cfqq[BLK_RW_SYNC];
if (cfqq)
cfq_mark_cfqq_prio_changed(cfqq);
}
RB_CLEAR_NODE(&cfqq->rb_node);
+ RB_CLEAR_NODE(&cfqq->p_node);
INIT_LIST_HEAD(&cfqq->fifo);
atomic_set(&cfqq->ref, 0);
sector_t sdist;
u64 total;
- if (cic->last_request_pos < rq->sector)
+ if (!cic->last_request_pos)
+ sdist = 0;
+ else if (cic->last_request_pos < rq->sector)
sdist = rq->sector - cic->last_request_pos;
else
sdist = cic->last_request_pos - rq->sector;
* Remember that we saw a request from this process, but
* don't start queuing just yet. Otherwise we risk seeing lots
* of tiny requests, because we disrupt the normal plugging
- * and merging.
+ * and merging. If the request is already larger than a single
+ * page, let it rip immediately. For that case we assume that
+ * merging is already done. Ditto for a busy system that
+ * has other work pending, don't risk delaying until the
+ * idle timer unplug to continue working.
*/
- if (cfq_cfqq_wait_request(cfqq))
+ if (cfq_cfqq_wait_request(cfqq)) {
+ if (blk_rq_bytes(rq) > PAGE_CACHE_SIZE ||
+ cfqd->busy_queues > 1) {
+ del_timer(&cfqd->idle_slice_timer);
+ blk_start_queueing(cfqd->queue);
+ }
cfq_mark_cfqq_must_dispatch(cfqq);
+ }
} else if (cfq_should_preempt(cfqd, cfqq, rq)) {
/*
* not the active queue - expire current slice if it is
* or if we want to idle in case it has no pending requests.
*/
if (cfqd->active_queue == cfqq) {
+ const bool cfqq_empty = RB_EMPTY_ROOT(&cfqq->sort_list);
+
if (cfq_cfqq_slice_new(cfqq)) {
cfq_set_prio_slice(cfqd, cfqq);
cfq_clear_cfqq_slice_new(cfqq);
}
+ /*
+ * If there are no requests waiting in this queue, and
+ * there are other queues ready to issue requests, AND
+ * those other queues are issuing requests within our
+ * mean seek distance, give them a chance to run instead
+ * of idling.
+ */
if (cfq_slice_used(cfqq) || cfq_class_idle(cfqq))
cfq_slice_expired(cfqd, 1);
- else if (sync && !rq_noidle(rq) &&
- RB_EMPTY_ROOT(&cfqq->sort_list)) {
+ else if (cfqq_empty && !cfq_close_cooperator(cfqd, cfqq, 1) &&
+ sync && !rq_noidle(rq))
cfq_arm_slice_timer(cfqd);
- }
}
if (!cfqd->rq_in_driver)
if (!cic)
return ELV_MQUEUE_MAY;
- cfqq = cic_to_cfqq(cic, rw & REQ_RW_SYNC);
+ cfqq = cic_to_cfqq(cic, rw_is_sync(rw));
if (cfqq) {
cfq_init_prio_data(cfqq, cic->ioc);
cfq_prio_boost(cfqq);
struct cfq_data *cfqd =
container_of(work, struct cfq_data, unplug_work);
struct request_queue *q = cfqd->queue;
- unsigned long flags;
- spin_lock_irqsave(q->queue_lock, flags);
+ spin_lock_irq(q->queue_lock);
blk_start_queueing(q);
- spin_unlock_irqrestore(q->queue_lock, flags);
+ spin_unlock_irq(q->queue_lock);
}
/*
static void *cfq_init_queue(struct request_queue *q)
{
struct cfq_data *cfqd;
+ int i;
cfqd = kmalloc_node(sizeof(*cfqd), GFP_KERNEL | __GFP_ZERO, q->node);
if (!cfqd)
return NULL;
cfqd->service_tree = CFQ_RB_ROOT;
+
+ /*
+ * Not strictly needed (since RB_ROOT just clears the node and we
+ * zeroed cfqd on alloc), but better be safe in case someone decides
+ * to add magic to the rb code
+ */
+ for (i = 0; i < CFQ_PRIO_LISTS; i++)
+ cfqd->prio_trees[i] = RB_ROOT;
+
INIT_LIST_HEAD(&cfqd->cic_list);
cfqd->queue = q;
/*
* Call with queue lock held, interrupts disabled
*/
-void elv_quisce_start(struct request_queue *q)
+void elv_quiesce_start(struct request_queue *q)
{
queue_flag_set(QUEUE_FLAG_ELVSWITCH, q);
}
}
-void elv_quisce_end(struct request_queue *q)
+void elv_quiesce_end(struct request_queue *q)
{
queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
}
* Turn on BYPASS and drain all requests w/ elevator private data
*/
spin_lock_irq(q->queue_lock);
- elv_quisce_start(q);
+ elv_quiesce_start(q);
/*
* Remember old elevator.
*/
elevator_exit(old_elevator);
spin_lock_irq(q->queue_lock);
- elv_quisce_end(q);
+ elv_quiesce_end(q);
spin_unlock_irq(q->queue_lock);
blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
if (flags & DISK_PITER_REVERSE)
piter->idx = ptbl->len - 1;
- else if (flags & DISK_PITER_INCL_PART0)
+ else if (flags & (DISK_PITER_INCL_PART0 | DISK_PITER_INCL_EMPTY_PART0))
piter->idx = 0;
else
piter->idx = 1;
/* determine iteration parameters */
if (piter->flags & DISK_PITER_REVERSE) {
inc = -1;
- if (piter->flags & DISK_PITER_INCL_PART0)
+ if (piter->flags & (DISK_PITER_INCL_PART0 |
+ DISK_PITER_INCL_EMPTY_PART0))
end = -1;
else
end = 0;
part = rcu_dereference(ptbl->part[piter->idx]);
if (!part)
continue;
- if (!(piter->flags & DISK_PITER_INCL_EMPTY) && !part->nr_sects)
+ if (!part->nr_sects &&
+ !(piter->flags & DISK_PITER_INCL_EMPTY) &&
+ !(piter->flags & DISK_PITER_INCL_EMPTY_PART0 &&
+ piter->idx == 0))
continue;
get_device(part_to_dev(part));
"\n\n");
*/
- disk_part_iter_init(&piter, gp, DISK_PITER_INCL_PART0);
+ disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0);
while ((hd = disk_part_iter_next(&piter))) {
cpu = part_stat_lock();
part_round_stats(cpu, hd);
struct bio *bio;
bio = bio_alloc(GFP_KERNEL, 0);
- if (!bio)
- return -ENOMEM;
bio->bi_end_io = blk_ioc_discard_endio;
bio->bi_bdev = bdev;
static int blk_complete_sghdr_rq(struct request *rq, struct sg_io_hdr *hdr,
struct bio *bio)
{
- int ret = 0;
+ int r, ret = 0;
/*
* fill in all the output members
ret = -EFAULT;
}
- blk_rq_unmap_user(bio);
+ r = blk_rq_unmap_user(bio);
+ if (!ret)
+ ret = r;
blk_put_request(rq);
return ret;
if (hdr->iovec_count) {
const int size = sizeof(struct sg_iovec) * hdr->iovec_count;
+ size_t iov_data_len;
struct sg_iovec *iov;
iov = kmalloc(size, GFP_KERNEL);
goto out;
}
+ /* SG_IO howto says that the shorter of the two wins */
+ iov_data_len = iov_length((struct iovec *)iov,
+ hdr->iovec_count);
+ if (hdr->dxfer_len < iov_data_len) {
+ hdr->iovec_count = iov_shorten((struct iovec *)iov,
+ hdr->iovec_count,
+ hdr->dxfer_len);
+ iov_data_len = hdr->dxfer_len;
+ }
+
ret = blk_rq_map_user_iov(q, rq, NULL, iov, hdr->iovec_count,
- hdr->dxfer_len, GFP_KERNEL);
+ iov_data_len, GFP_KERNEL);
kfree(iov);
} else if (hdr->dxfer_len)
ret = blk_rq_map_user(q, rq, NULL, hdr->dxferp, hdr->dxfer_len,
obj-y += serial/
obj-$(CONFIG_PARPORT) += parport/
-obj-y += base/ block/ misc/ mfd/ media/
+obj-y += base/ block/ misc/ mfd/
obj-$(CONFIG_NUBUS) += nubus/
obj-y += macintosh/
obj-$(CONFIG_IDE) += ide/
obj-$(CONFIG_INPUT) += input/
obj-$(CONFIG_I2O) += message/
obj-$(CONFIG_RTC_LIB) += rtc/
-obj-y += i2c/
+obj-y += i2c/ media/
obj-$(CONFIG_W1) += w1/
obj-$(CONFIG_POWER_SUPPLY) += power/
obj-$(CONFIG_HWMON) += hwmon/
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
+static unsigned int gts, bfs;
+module_param(gts, uint, 0644);
+module_param(bfs, uint, 0644);
+MODULE_PARM_DESC(gts, "Enable evaluation of _GTS on suspend.");
+MODULE_PARM_DESC(bfs, "Enable evaluation of _BFS on resume".);
+
/*******************************************************************************
*
* FUNCTION: acpi_enter_sleep_state
return_ACPI_STATUS(status);
}
- /* Execute the _GTS method */
+ if (gts) {
+ /* Execute the _GTS method */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- return_ACPI_STATUS(status);
+ status = acpi_evaluate_object(NULL, METHOD_NAME__GTS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ return_ACPI_STATUS(status);
+ }
}
/* Get current value of PM1A control */
}
}
- /* Execute the _BFS method */
+ if (bfs) {
+ /* Execute the _BFS method */
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = sleep_state;
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = sleep_state;
- status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
- if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
- ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+ status = acpi_evaluate_object(NULL, METHOD_NAME__BFS, &arg_list, NULL);
+ if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
+ ACPI_EXCEPTION((AE_INFO, status, "During Method _BFS"));
+ }
}
-
return_ACPI_STATUS(status);
}
{"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP},
{"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP},
{"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP},
+ {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP},
{"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP},
{"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP},
{"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP},
ACPI_ERROR((AE_INFO,
"Illegal I/O port address/length above 64K: 0x%p/%X",
ACPI_CAST_PTR(void, address), byte_width));
- return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
+ return_ACPI_STATUS(AE_LIMIT);
}
/* Exit if requested address is not within the protected port table */
/* Port illegality may depend on the _OSI calls made by the BIOS */
if (acpi_gbl_osi_data >= port_info->osi_dependency) {
- ACPI_ERROR((AE_INFO,
- "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
- ACPI_CAST_PTR(void, address),
- byte_width, port_info->name,
- port_info->start, port_info->end));
+ ACPI_DEBUG_PRINT((ACPI_DB_IO,
+ "Denied AML access to port 0x%p/%X (%s 0x%.4X-0x%.4X)",
+ ACPI_CAST_PTR(void, address),
+ byte_width, port_info->name,
+ port_info->start,
+ port_info->end));
return_ACPI_STATUS(AE_AML_ILLEGAL_ADDRESS);
}
* Value Where value is placed
* Width Number of bits
*
- * RETURN: Value read from port
+ * RETURN: Status and value read from port
*
* DESCRIPTION: Read data from an I/O port or register. This is a front-end
* to acpi_os_read_port that performs validation on both the port
acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width)
{
acpi_status status;
+ u32 one_byte;
+ u32 i;
+
+ /* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
- if (ACPI_FAILURE(status)) {
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_os_read_port(address, value, width);
return status;
}
- status = acpi_os_read_port(address, value, width);
- return status;
+ if (status != AE_AML_ILLEGAL_ADDRESS) {
+ return status;
+ }
+
+ /*
+ * There has been a protection violation within the request. Fall
+ * back to byte granularity port I/O and ignore the failing bytes.
+ * This provides Windows compatibility.
+ */
+ for (i = 0, *value = 0; i < width; i += 8) {
+
+ /* Validate and read one byte */
+
+ if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+ status = acpi_os_read_port(address, &one_byte, 8);
+ if (ACPI_FAILURE(status)) {
+ return status;
+ }
+
+ *value |= (one_byte << i);
+ }
+
+ address++;
+ }
+
+ return AE_OK;
}
/******************************************************************************
* Value Value to write
* Width Number of bits
*
- * RETURN: None
+ * RETURN: Status
*
* DESCRIPTION: Write data to an I/O port or register. This is a front-end
* to acpi_os_write_port that performs validation on both the port
acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width)
{
acpi_status status;
+ u32 i;
+
+ /* Validate the entire request and perform the I/O */
status = acpi_hw_validate_io_request(address, width);
- if (ACPI_FAILURE(status)) {
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_os_write_port(address, value, width);
return status;
}
- status = acpi_os_write_port(address, value, width);
- return status;
+ if (status != AE_AML_ILLEGAL_ADDRESS) {
+ return status;
+ }
+
+ /*
+ * There has been a protection violation within the request. Fall
+ * back to byte granularity port I/O and ignore the failing bytes.
+ * This provides Windows compatibility.
+ */
+ for (i = 0; i < width; i += 8) {
+
+ /* Validate and write one byte */
+
+ if (acpi_hw_validate_io_request(address, 8) == AE_OK) {
+ status =
+ acpi_os_write_port(address, (value >> i) & 0xFF, 8);
+ if (ACPI_FAILURE(status)) {
+ return status;
+ }
+ }
+
+ address++;
+ }
+
+ return AE_OK;
}
package_element = *top_object_list;
+ /* We must have a valid Package object */
+
+ if (!package_element ||
+ (package_element->common.type != ACPI_TYPE_PACKAGE)) {
+ return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+ }
+
/*
* The sub_object_list will now point to an array of the
* four IRQ elements: Address, Pin, Source and source_index
user_prt = ACPI_CAST_PTR(struct acpi_pci_routing_table, buffer);
for (index = 0; index < number_of_elements; index++) {
- int source_name_index = 2;
- int source_index_index = 3;
/*
* Point user_prt past this current structure
return_ACPI_STATUS(AE_BAD_DATA);
}
- /*
- * If BIOS erroneously reversed the _PRT source_name and source_index,
- * then reverse them back.
- */
- if ((sub_object_list[3])->common.type !=
- ACPI_TYPE_INTEGER) {
- if (acpi_gbl_enable_interpreter_slack) {
- source_name_index = 3;
- source_index_index = 2;
- printk(KERN_WARNING
- "ACPI: Handling Garbled _PRT entry\n");
- } else {
- ACPI_ERROR((AE_INFO,
- "(PRT[%X].source_index) Need Integer, found %s",
- index,
- acpi_ut_get_object_type_name
- (sub_object_list[3])));
- return_ACPI_STATUS(AE_BAD_DATA);
- }
- }
-
user_prt->pin = (u32) obj_desc->integer.value;
/*
* 3) Third subobject: Dereference the PRT.source_name
* The name may be unresolved (slack mode), so allow a null object
*/
- obj_desc = sub_object_list[source_name_index];
+ obj_desc = sub_object_list[2];
if (obj_desc) {
switch (obj_desc->common.type) {
case ACPI_TYPE_LOCAL_REFERENCE:
/* 4) Fourth subobject: Dereference the PRT.source_index */
- obj_desc = sub_object_list[source_index_index];
+ obj_desc = sub_object_list[3];
if (obj_desc->common.type != ACPI_TYPE_INTEGER) {
ACPI_ERROR((AE_INFO,
"(PRT[%X].SourceIndex) Need Integer, found %s",
/*
- * acpi_button.c - ACPI Button Driver ($Revision: 30 $)
+ * button.c - ACPI Button Driver
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
#define ACPI_BUTTON_SUBCLASS_POWER "power"
#define ACPI_BUTTON_HID_POWER "PNP0C0C"
-#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_POWERF "Power Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_POWER "Power Button"
#define ACPI_BUTTON_TYPE_POWER 0x01
-#define ACPI_BUTTON_TYPE_POWERF 0x02
#define ACPI_BUTTON_SUBCLASS_SLEEP "sleep"
#define ACPI_BUTTON_HID_SLEEP "PNP0C0E"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button (CM)"
-#define ACPI_BUTTON_DEVICE_NAME_SLEEPF "Sleep Button (FF)"
+#define ACPI_BUTTON_DEVICE_NAME_SLEEP "Sleep Button"
#define ACPI_BUTTON_TYPE_SLEEP 0x03
-#define ACPI_BUTTON_TYPE_SLEEPF 0x04
#define ACPI_BUTTON_SUBCLASS_LID "lid"
#define ACPI_BUTTON_HID_LID "PNP0C0D"
};
struct acpi_button {
- struct acpi_device *device; /* Fixed button kludge */
unsigned int type;
struct input_dev *input;
char phys[32]; /* for input device */
static int acpi_button_info_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = seq->private;
-
- if (!button || !button->device)
- return 0;
+ struct acpi_device *device = seq->private;
seq_printf(seq, "type: %s\n",
- acpi_device_name(button->device));
-
+ acpi_device_name(device));
return 0;
}
static int acpi_button_state_seq_show(struct seq_file *seq, void *offset)
{
- struct acpi_button *button = seq->private;
+ struct acpi_device *device = seq->private;
acpi_status status;
unsigned long long state;
- if (!button || !button->device)
- return 0;
-
- status = acpi_evaluate_integer(button->device->handle, "_LID", NULL, &state);
+ status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
seq_printf(seq, "state: %s\n",
ACPI_FAILURE(status) ? "unsupported" :
(state ? "open" : "closed"));
static int acpi_button_add_fs(struct acpi_device *device)
{
+ struct acpi_button *button = acpi_driver_data(device);
struct proc_dir_entry *entry = NULL;
- struct acpi_button *button;
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- button = acpi_driver_data(device);
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
- case ACPI_BUTTON_TYPE_POWERF:
if (!acpi_power_dir)
acpi_power_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_POWER,
acpi_button_dir);
entry = acpi_power_dir;
break;
case ACPI_BUTTON_TYPE_SLEEP:
- case ACPI_BUTTON_TYPE_SLEEPF:
if (!acpi_sleep_dir)
acpi_sleep_dir = proc_mkdir(ACPI_BUTTON_SUBCLASS_SLEEP,
acpi_button_dir);
/* 'info' [R] */
entry = proc_create_data(ACPI_BUTTON_FILE_INFO,
S_IRUGO, acpi_device_dir(device),
- &acpi_button_info_fops,
- acpi_driver_data(device));
+ &acpi_button_info_fops, device);
if (!entry)
return -ENODEV;
if (button->type == ACPI_BUTTON_TYPE_LID) {
entry = proc_create_data(ACPI_BUTTON_FILE_STATE,
S_IRUGO, acpi_device_dir(device),
- &acpi_button_state_fops,
- acpi_driver_data(device));
+ &acpi_button_state_fops, device);
if (!entry)
return -ENODEV;
}
/* --------------------------------------------------------------------------
Driver Interface
-------------------------------------------------------------------------- */
-static int acpi_lid_send_state(struct acpi_button *button)
+static int acpi_lid_send_state(struct acpi_device *device)
{
+ struct acpi_button *button = acpi_driver_data(device);
unsigned long long state;
acpi_status status;
- status = acpi_evaluate_integer(button->device->handle, "_LID", NULL,
- &state);
+ status = acpi_evaluate_integer(device->handle, "_LID", NULL, &state);
if (ACPI_FAILURE(status))
return -ENODEV;
+
/* input layer checks if event is redundant */
input_report_switch(button->input, SW_LID, !state);
input_sync(button->input);
struct acpi_button *button = acpi_driver_data(device);
struct input_dev *input;
- if (!button || !button->device)
- return;
-
switch (event) {
case ACPI_FIXED_HARDWARE_EVENT:
event = ACPI_BUTTON_NOTIFY_STATUS;
case ACPI_BUTTON_NOTIFY_STATUS:
input = button->input;
if (button->type == ACPI_BUTTON_TYPE_LID) {
- acpi_lid_send_state(button);
+ acpi_lid_send_state(device);
} else {
int keycode = test_bit(KEY_SLEEP, input->keybit) ?
KEY_SLEEP : KEY_POWER;
input_sync(input);
}
- acpi_bus_generate_proc_event(button->device, event,
- ++button->pushed);
+ acpi_bus_generate_proc_event(device, event, ++button->pushed);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Unsupported event [0x%x]\n", event));
break;
}
-
- return;
}
static int acpi_button_resume(struct acpi_device *device)
{
- struct acpi_button *button;
- if (!device)
- return -EINVAL;
- button = acpi_driver_data(device);
- if (button && button->type == ACPI_BUTTON_TYPE_LID)
- return acpi_lid_send_state(button);
+ struct acpi_button *button = acpi_driver_data(device);
+
+ if (button->type == ACPI_BUTTON_TYPE_LID)
+ return acpi_lid_send_state(device);
return 0;
}
static int acpi_button_add(struct acpi_device *device)
{
- int error;
struct acpi_button *button;
struct input_dev *input;
-
- if (!device)
- return -EINVAL;
+ char *hid, *name, *class;
+ int error;
button = kzalloc(sizeof(struct acpi_button), GFP_KERNEL);
if (!button)
return -ENOMEM;
- button->device = device;
device->driver_data = button;
button->input = input = input_allocate_device();
goto err_free_button;
}
- /*
- * Determine the button type (via hid), as fixed-feature buttons
- * need to be handled a bit differently than generic-space.
- */
- if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWER)) {
+ hid = acpi_device_hid(device);
+ name = acpi_device_name(device);
+ class = acpi_device_class(device);
+
+ if (!strcmp(hid, ACPI_BUTTON_HID_POWER) ||
+ !strcmp(hid, ACPI_BUTTON_HID_POWERF)) {
button->type = ACPI_BUTTON_TYPE_POWER;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_POWER);
- sprintf(acpi_device_class(device), "%s/%s",
- ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_POWERF)) {
- button->type = ACPI_BUTTON_TYPE_POWERF;
- strcpy(acpi_device_name(device),
- ACPI_BUTTON_DEVICE_NAME_POWERF);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_POWER);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_POWER);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEP)) {
+ } else if (!strcmp(hid, ACPI_BUTTON_HID_SLEEP) ||
+ !strcmp(hid, ACPI_BUTTON_HID_SLEEPF)) {
button->type = ACPI_BUTTON_TYPE_SLEEP;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_SLEEP);
- sprintf(acpi_device_class(device), "%s/%s",
- ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_SLEEPF)) {
- button->type = ACPI_BUTTON_TYPE_SLEEPF;
- strcpy(acpi_device_name(device),
- ACPI_BUTTON_DEVICE_NAME_SLEEPF);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_SLEEP);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_SLEEP);
- } else if (!strcmp(acpi_device_hid(device), ACPI_BUTTON_HID_LID)) {
+ } else if (!strcmp(hid, ACPI_BUTTON_HID_LID)) {
button->type = ACPI_BUTTON_TYPE_LID;
- strcpy(acpi_device_name(device), ACPI_BUTTON_DEVICE_NAME_LID);
- sprintf(acpi_device_class(device), "%s/%s",
+ strcpy(name, ACPI_BUTTON_DEVICE_NAME_LID);
+ sprintf(class, "%s/%s",
ACPI_BUTTON_CLASS, ACPI_BUTTON_SUBCLASS_LID);
} else {
- printk(KERN_ERR PREFIX "Unsupported hid [%s]\n",
- acpi_device_hid(device));
+ printk(KERN_ERR PREFIX "Unsupported hid [%s]\n", hid);
error = -ENODEV;
goto err_free_input;
}
if (error)
goto err_free_input;
- snprintf(button->phys, sizeof(button->phys),
- "%s/button/input0", acpi_device_hid(device));
+ snprintf(button->phys, sizeof(button->phys), "%s/button/input0", hid);
- input->name = acpi_device_name(device);
+ input->name = name;
input->phys = button->phys;
input->id.bustype = BUS_HOST;
input->id.product = button->type;
switch (button->type) {
case ACPI_BUTTON_TYPE_POWER:
- case ACPI_BUTTON_TYPE_POWERF:
input->evbit[0] = BIT_MASK(EV_KEY);
set_bit(KEY_POWER, input->keybit);
break;
case ACPI_BUTTON_TYPE_SLEEP:
- case ACPI_BUTTON_TYPE_SLEEPF:
input->evbit[0] = BIT_MASK(EV_KEY);
set_bit(KEY_SLEEP, input->keybit);
break;
if (error)
goto err_remove_fs;
if (button->type == ACPI_BUTTON_TYPE_LID)
- acpi_lid_send_state(button);
+ acpi_lid_send_state(device);
if (device->wakeup.flags.valid) {
/* Button's GPE is run-wake GPE */
device->wakeup.state.enabled = 1;
}
- printk(KERN_INFO PREFIX "%s [%s]\n",
- acpi_device_name(device), acpi_device_bid(device));
-
+ printk(KERN_INFO PREFIX "%s [%s]\n", name, acpi_device_bid(device));
return 0;
err_remove_fs:
static int acpi_button_remove(struct acpi_device *device, int type)
{
- struct acpi_button *button;
-
- if (!device || !acpi_driver_data(device))
- return -EINVAL;
-
- button = acpi_driver_data(device);
+ struct acpi_button *button = acpi_driver_data(device);
acpi_button_remove_fs(device);
input_unregister_device(button->input);
kfree(button);
-
return 0;
}
acpi_button_dir = proc_mkdir(ACPI_BUTTON_CLASS, acpi_root_dir);
if (!acpi_button_dir)
return -ENODEV;
+
result = acpi_bus_register_driver(&acpi_button_driver);
if (result < 0) {
remove_proc_entry(ACPI_BUTTON_CLASS, acpi_root_dir);
struct acpi_ec *ec = acpi_driver_data(device);
/* Enable use of GPE back */
clear_bit(EC_FLAGS_NO_GPE, &ec->flags);
+ set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
acpi_enable_gpe(NULL, ec->gpe);
return 0;
}
if (handled) {
acpi_irq_handled++;
return IRQ_HANDLED;
- } else
+ } else {
+ acpi_irq_not_handled++;
return IRQ_NONE;
+ }
}
acpi_status
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
struct acpi_processor_cx *cx = &pr->power.states[i];
+#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
+ /* TSC could halt in idle, so notify users */
+ if (tsc_halts_in_c(cx->type))
+ mark_tsc_unstable("TSC halts in idle");;
+#endif
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
seq_printf(seq, "active state: C%zd\n"
"max_cstate: C%d\n"
- "bus master activity: %08x\n"
"maximum allowed latency: %d usec\n",
pr->power.state ? pr->power.state - pr->power.states : 0,
- max_cstate, (unsigned)pr->power.bm_activity,
- pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
+ max_cstate, pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY));
seq_puts(seq, "states:\n");
kt2 = ktime_get_real();
idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
- /* TSC could halt in idle, so notify users */
- if (tsc_halts_in_c(cx->type))
- mark_tsc_unstable("TSC halts in idle");;
-#endif
sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
*/
acpi_state_timer_broadcast(pr, cx, 1);
+ kt1 = ktime_get_real();
/*
* disable bus master
* bm_check implies we need ARB_DIS
ACPI_FLUSH_CPU_CACHE();
}
- kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
- kt2 = ktime_get_real();
- idle_time = ktime_to_us(ktime_sub(kt2, kt1));
/* Re-enable bus master arbitration */
if (pr->flags.bm_check && pr->flags.bm_control) {
c3_cpu_count--;
spin_unlock(&c3_lock);
}
+ kt2 = ktime_get_real();
+ idle_time = ktime_to_us(ktime_sub(kt2, kt1));
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
- /* TSC could halt in idle, so notify users */
- if (tsc_halts_in_c(ACPI_STATE_C3))
- mark_tsc_unstable("TSC halts in idle");
-#endif
sleep_ticks = us_to_pm_timer_ticks(idle_time);
/* Tell the scheduler how much we idled: */
sched_clock_idle_wakeup_event(sleep_ticks*PM_TIMER_TICK_NS);
dev->states[i].desc[0] = '\0';
}
+ if (max_cstate == 0)
+ max_cstate = 1;
+
for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
cx = &pr->power.states[i];
state = &dev->states[count];
static struct platform_suspend_ops acpi_suspend_ops = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin,
- .prepare = acpi_pm_prepare,
+ .prepare_late = acpi_pm_prepare,
.enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
};
static struct platform_suspend_ops acpi_suspend_ops_old = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin_old,
- .prepare = acpi_pm_disable_gpes,
+ .prepare_late = acpi_pm_disable_gpes,
.enter = acpi_suspend_enter,
- .finish = acpi_pm_finish,
+ .wake = acpi_pm_finish,
.end = acpi_pm_end,
.recover = acpi_pm_finish,
};
acpi_enter_sleep_state(ACPI_STATE_S5);
}
+/*
+ * ACPI 2.0 created the optional _GTS and _BFS,
+ * but industry adoption has been neither rapid nor broad.
+ *
+ * Linux gets into trouble when it executes poorly validated
+ * paths through the BIOS, so disable _GTS and _BFS by default,
+ * but do speak up and offer the option to enable them.
+ */
+void __init acpi_gts_bfs_check(void)
+{
+ acpi_handle dummy;
+
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__GTS, &dummy)))
+ {
+ printk(KERN_NOTICE PREFIX "BIOS offers _GTS\n");
+ printk(KERN_NOTICE PREFIX "If \"acpi.gts=1\" improves suspend, "
+ "please notify linux-acpi@vger.kernel.org\n");
+ }
+ if (ACPI_SUCCESS(acpi_get_handle(ACPI_ROOT_OBJECT, METHOD_NAME__BFS, &dummy)))
+ {
+ printk(KERN_NOTICE PREFIX "BIOS offers _BFS\n");
+ printk(KERN_NOTICE PREFIX "If \"acpi.bfs=1\" improves resume, "
+ "please notify linux-acpi@vger.kernel.org\n");
+ }
+}
+
int __init acpi_sleep_init(void)
{
acpi_status status;
* object can also be evaluated when the system enters S5.
*/
register_reboot_notifier(&tts_notifier);
+ acpi_gts_bfs_check();
return 0;
}
#define ACPI_SYSTEM_DEVICE_NAME "System"
u32 acpi_irq_handled;
+u32 acpi_irq_not_handled;
/*
* Make ACPICA version work as module param
#define COUNT_GPE 0
#define COUNT_SCI 1 /* acpi_irq_handled */
-#define COUNT_ERROR 2 /* other */
-#define NUM_COUNTERS_EXTRA 3
+#define COUNT_SCI_NOT 2 /* acpi_irq_not_handled */
+#define COUNT_ERROR 3 /* other */
+#define NUM_COUNTERS_EXTRA 4
struct event_counter {
u32 count;
all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI].count =
acpi_irq_handled;
+ all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT].count =
+ acpi_irq_not_handled;
all_counters[num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_GPE].count =
acpi_gpe_count;
all_counters[i].count = 0;
acpi_gpe_count = 0;
acpi_irq_handled = 0;
+ acpi_irq_not_handled = 0;
goto end;
}
sprintf(buffer, "gpe_all");
else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI)
sprintf(buffer, "sci");
+ else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI_NOT)
+ sprintf(buffer, "sci_not");
else if (i == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_ERROR)
sprintf(buffer, "error");
else
thermal_zone_device_register("acpitz", trips, tz,
&acpi_thermal_zone_ops,
0, 0, 0,
- tz->polling_frequency);
+ tz->polling_frequency*100);
if (IS_ERR(tz->thermal_zone))
return -ENODEV;
* In this case, the first two elements in _BCL packages
* are also supported brightness levels that OS should take care of.
*/
- for (i = 2; i < count; i++)
- if (br->levels[i] == br->levels[0] ||
- br->levels[i] == br->levels[1])
+ for (i = 2; i < count; i++) {
+ if (br->levels[i] == br->levels[0])
level_ac_battery++;
+ if (br->levels[i] == br->levels[1])
+ level_ac_battery++;
+ }
if (level_ac_battery < 2) {
level_ac_battery = 2 - level_ac_battery;
br->flags._BCM_use_index = br->flags._BCL_use_index;
/* _BQC uses INDEX while _BCL uses VALUE in some laptops */
- br->curr = max_level;
+ br->curr = level_old = max_level;
+
+ if (!device->cap._BQC)
+ goto set_level;
+
result = acpi_video_device_lcd_get_level_current(device, &level_old);
if (result)
goto out_free_levels;
- result = acpi_video_device_lcd_set_level(device, br->curr);
+ /*
+ * Set the level to maximum and check if _BQC uses indexed value
+ */
+ result = acpi_video_device_lcd_set_level(device, max_level);
if (result)
goto out_free_levels;
if (result)
goto out_free_levels;
- if ((level != level_old) && !br->flags._BCM_use_index) {
- /* Note:
- * This piece of code does not work correctly if the current
- * brightness levels is 0.
- * But I guess boxes that boot with such a dark screen are rare
- * and no more code is needed to cover this specifial case.
- */
-
- if (level_ac_battery != 2) {
- /*
- * For now, we don't support the _BCL like this:
- * 16, 15, 0, 1, 2, 3, ..., 14, 15, 16
- * because we may mess up the index returned by _BQC.
- * Plus: we have not got a box like this.
- */
- ACPI_ERROR((AE_INFO, "_BCL not supported\n"));
- }
- br->flags._BQC_use_index = 1;
- }
+ br->flags._BQC_use_index = (level == max_level ? 0 : 1);
+
+ if (!br->flags._BQC_use_index)
+ goto set_level;
+
+ if (br->flags._BCL_reversed)
+ level_old = (br->count - 1) - level_old;
+ level_old = br->levels[level_old];
+
+set_level:
+ result = acpi_video_device_lcd_set_level(device, level_old);
+ if (result)
+ goto out_free_levels;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"found %d brightness levels\n", count - 2));
return acpi_video_register();
}
-static void __exit acpi_video_exit(void)
+void __exit acpi_video_exit(void)
{
acpi_bus_unregister_driver(&acpi_video_bus);
return;
}
+EXPORT_SYMBOL(acpi_video_exit);
module_init(acpi_video_init);
module_exit(acpi_video_exit);
* ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
* and must be dword aligned
* ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
+ * ICH7 errata #16 - MWDMA1 timings are incorrect
*
* Should have been BIOS fixed:
* 450NX: errata #19 - DMA hangs on old 450NX
#include <linux/dmi.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "2.12"
+#define DRV_VERSION "2.13"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
ich_pata_33, /* ICH up to UDMA 33 only */
ich_pata_66, /* ICH up to 66 Mhz */
ich_pata_100, /* ICH up to UDMA 100 */
+ ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/
ich5_sata,
ich6_sata,
ich6m_sata,
/* ICH6 (and 6) (i915) UDMA 100 */
{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* ICH7/7-R (i945, i975) UDMA 100*/
- { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
- { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+ { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
+ { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
/* ICH8 Mobile PATA Controller */
{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
.port_ops = &ich_pata_ops,
},
+ [ich_pata_100_nomwdma1] =
+ {
+ .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2_ONLY,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &ich_pata_ops,
+ },
+
[ich5_sata] =
{
.flags = PIIX_SATA_FLAGS,
{ 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
{ 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
+ { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */
/* end marker */
{ 0, }
};
*
* We follow the current spec and consider that 0x69/0x96
* identifies a port multiplier and 0x3c/0xc3 a SEMB device.
+ * Unfortunately, WDC WD1600JS-62MHB5 (a hard drive) reports
+ * SEMB signature. This is worked around in
+ * ata_dev_read_id().
*/
if ((tf->lbam == 0) && (tf->lbah == 0)) {
DPRINTK("found ATA device by sig\n");
}
if ((tf->lbam == 0x3c) && (tf->lbah == 0xc3)) {
- printk(KERN_INFO "ata: SEMB device ignored\n");
- return ATA_DEV_SEMB_UNSUP; /* not yet */
+ DPRINTK("found SEMB device by sig (could be ATA device)\n");
+ return ATA_DEV_SEMB;
}
DPRINTK("unknown device\n");
/*
* Process compact flash extended modes
*/
- int pio = id[163] & 0x7;
- int dma = (id[163] >> 3) & 7;
+ int pio = (id[ATA_ID_CFA_MODES] >> 0) & 0x7;
+ int dma = (id[ATA_ID_CFA_MODES] >> 3) & 0x7;
if (pio)
pio_mask |= (1 << 5);
struct ata_taskfile tf;
unsigned int err_mask = 0;
const char *reason;
+ bool is_semb = class == ATA_DEV_SEMB;
int may_fallback = 1, tried_spinup = 0;
int rc;
ata_tf_init(dev, &tf);
switch (class) {
+ case ATA_DEV_SEMB:
+ class = ATA_DEV_ATA; /* some hard drives report SEMB sig */
case ATA_DEV_ATA:
tf.command = ATA_CMD_ID_ATA;
break;
return -ENOENT;
}
+ if (is_semb) {
+ ata_dev_printk(dev, KERN_INFO, "IDENTIFY failed on "
+ "device w/ SEMB sig, disabled\n");
+ /* SEMB is not supported yet */
+ *p_class = ATA_DEV_SEMB_UNSUP;
+ return 0;
+ }
+
if ((err_mask == AC_ERR_DEV) && (tf.feature & ATA_ABORTED)) {
/* Device or controller might have reported
* the wrong device class. Give a shot at the
/* ATA-specific feature tests */
if (dev->class == ATA_DEV_ATA) {
if (ata_id_is_cfa(id)) {
- if (id[162] & 1) /* CPRM may make this media unusable */
+ /* CPRM may make this media unusable */
+ if (id[ATA_ID_CFA_KEY_MGMT] & 1)
ata_dev_printk(dev, KERN_WARNING,
"supports DRM functions and may "
"not be fully accessable.\n");
/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
if (ata_class_enabled(new_class) &&
- new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
+ new_class != ATA_DEV_ATA &&
+ new_class != ATA_DEV_ATAPI &&
+ new_class != ATA_DEV_SEMB) {
ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
dev->class, new_class);
rc = -ENODEV;
} else if (dev->class == ATA_DEV_UNKNOWN &&
ehc->tries[dev->devno] &&
ata_class_enabled(ehc->classes[dev->devno])) {
+ /* Temporarily set dev->class, it will be
+ * permanently set once all configurations are
+ * complete. This is necessary because new
+ * device configuration is done in two
+ * separate loops.
+ */
dev->class = ehc->classes[dev->devno];
if (dev->class == ATA_DEV_PMP)
else
rc = ata_dev_read_id(dev, &dev->class,
readid_flags, dev->id);
+
+ /* read_id might have changed class, store and reset */
+ ehc->classes[dev->devno] = dev->class;
+ dev->class = ATA_DEV_UNKNOWN;
+
switch (rc) {
case 0:
/* clear error info accumulated during probe */
case -ENOENT:
/* IDENTIFY was issued to non-existent
* device. No need to reset. Just
- * thaw and kill the device.
+ * thaw and ignore the device.
*/
ata_eh_thaw_port(ap);
- dev->class = ATA_DEV_UNKNOWN;
break;
default:
- dev->class = ATA_DEV_UNKNOWN;
goto err;
}
}
dev->class == ATA_DEV_PMP)
continue;
+ dev->class = ehc->classes[dev->devno];
+
ehc->i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);
ehc->i.flags &= ~ATA_EHI_PRINTINFO;
- if (rc)
+ if (rc) {
+ dev->class = ATA_DEV_UNKNOWN;
goto err;
+ }
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
*/
static void ata_eh_handle_port_resume(struct ata_port *ap)
{
+ struct ata_link *link;
+ struct ata_device *dev;
unsigned long flags;
int rc = 0;
WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
+ /*
+ * Error timestamps are in jiffies which doesn't run while
+ * suspended and PHY events during resume isn't too uncommon.
+ * When the two are combined, it can lead to unnecessary speed
+ * downs if the machine is suspended and resumed repeatedly.
+ * Clear error history.
+ */
+ ata_for_each_link(link, ap, HOST_FIRST)
+ ata_for_each_dev(dev, link, ALL)
+ ata_ering_clear(&dev->ering);
+
ata_acpi_set_state(ap, PMSG_ON);
if (ap->ops->port_resume)
return ap->ops->em_show(ap, buf);
return -EINVAL;
}
-DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO,
+DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
ata_scsi_em_message_show, ata_scsi_em_message_store);
EXPORT_SYMBOL_GPL(dev_attr_em_message);
}
return -EINVAL;
}
-DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show,
+DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
ata_scsi_activity_store);
EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
return rc;
}
+static int ata_ioc32(struct ata_port *ap)
+{
+ if (ap->flags & ATA_FLAG_PIO_DMA)
+ return 1;
+ if (ap->pflags & ATA_PFLAG_PIO32)
+ return 1;
+ return 0;
+}
+
int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *scsidev,
int cmd, void __user *arg)
{
int val = -EINVAL, rc = -EINVAL;
+ unsigned long flags;
switch (cmd) {
case ATA_IOC_GET_IO32:
- val = 0;
+ spin_lock_irqsave(ap->lock, flags);
+ val = ata_ioc32(ap);
+ spin_unlock_irqrestore(ap->lock, flags);
if (copy_to_user(arg, &val, 1))
return -EFAULT;
return 0;
case ATA_IOC_SET_IO32:
val = (unsigned long) arg;
- if (val != 0)
- return -EINVAL;
- return 0;
+ rc = 0;
+ spin_lock_irqsave(ap->lock, flags);
+ if (ap->pflags & ATA_PFLAG_PIO32CHANGE) {
+ if (val)
+ ap->pflags |= ATA_PFLAG_PIO32;
+ else
+ ap->pflags &= ~ATA_PFLAG_PIO32;
+ } else {
+ if (val != ata_ioc32(ap))
+ rc = -EINVAL;
+ }
+ spin_unlock_irqrestore(ap->lock, flags);
+ return rc;
case HDIO_GET_IDENTITY:
return ata_get_identity(ap, scsidev, arg);
static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
{
+ int form_factor = ata_id_form_factor(args->id);
+ int media_rotation_rate = ata_id_rotation_rate(args->id);
+
rbuf[1] = 0xb1;
rbuf[3] = 0x3c;
- if (ata_id_major_version(args->id) > 7) {
- rbuf[4] = args->id[217] >> 8;
- rbuf[5] = args->id[217];
- rbuf[7] = args->id[168] & 0xf;
- }
+ rbuf[4] = media_rotation_rate >> 8;
+ rbuf[5] = media_rotation_rate;
+ rbuf[7] = form_factor;
return 0;
}
*/
static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
{
- u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
+ struct ata_device *dev = args->dev;
+ u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */
+ u8 log_per_phys = 0;
+ u16 lowest_aligned = 0;
+ u16 word_106 = dev->id[106];
+ u16 word_209 = dev->id[209];
+
+ if ((word_106 & 0xc000) == 0x4000) {
+ /* Number and offset of logical sectors per physical sector */
+ if (word_106 & (1 << 13))
+ log_per_phys = word_106 & 0xf;
+ if ((word_209 & 0xc000) == 0x4000) {
+ u16 first = dev->id[209] & 0x3fff;
+ if (first > 0)
+ lowest_aligned = (1 << log_per_phys) - first;
+ }
+ }
VPRINTK("ENTER\n");
/* sector size */
rbuf[10] = ATA_SECT_SIZE >> 8;
rbuf[11] = ATA_SECT_SIZE & 0xff;
+
+ rbuf[12] = 0;
+ rbuf[13] = log_per_phys;
+ rbuf[14] = (lowest_aligned >> 8) & 0x3f;
+ rbuf[15] = lowest_aligned;
}
return 0;
.inherits = &ata_bmdma_port_ops,
.sff_data_xfer = ata_sff_data_xfer32,
+ .port_start = ata_sff_port_start32,
};
EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
void __iomem *data_addr = ap->ioaddr.data_addr;
unsigned int words = buflen >> 2;
int slop = buflen & 3;
+
+ if (!(ap->pflags & ATA_PFLAG_PIO32))
+ return ata_sff_data_xfer(dev, buf, buflen, rw);
/* Transfer multiple of 4 bytes */
if (rw == READ)
}
EXPORT_SYMBOL_GPL(ata_sff_port_start);
+/**
+ * ata_sff_port_start32 - Set port up for dma.
+ * @ap: Port to initialize
+ *
+ * Called just after data structures for each port are
+ * initialized. Allocates space for PRD table if the device
+ * is DMA capable SFF.
+ *
+ * May be used as the port_start() entry in ata_port_operations for
+ * devices that are capable of 32bit PIO.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+int ata_sff_port_start32(struct ata_port *ap)
+{
+ ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
+ if (ap->ioaddr.bmdma_addr)
+ return ata_port_start(ap);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_start32);
+
/**
* ata_sff_std_ports - initialize ioaddr with standard port offsets.
* @ioaddr: IO address structure to be initialized
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2005-2007 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
*
* TODO
* Look into engine reset on timeout errors. Should not be required.
#include <linux/libata.h>
#define DRV_NAME "pata_hpt37x"
-#define DRV_VERSION "0.6.11"
+#define DRV_VERSION "0.6.12"
struct hpt_clock {
u8 xfer_speed;
pci_write_config_dword(pdev, addr1, reg | mode);
}
-/**
- * hpt370_bmdma_start - DMA engine begin
- * @qc: ATA command
- *
- * The 370 and 370A want us to reset the DMA engine each time we
- * use it. The 372 and later are fine.
- */
-
-static void hpt370_bmdma_start(struct ata_queued_cmd *qc)
-{
- struct ata_port *ap = qc->ap;
- struct pci_dev *pdev = to_pci_dev(ap->host->dev);
- pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
- udelay(10);
- ata_bmdma_start(qc);
-}
-
/**
* hpt370_bmdma_end - DMA engine stop
* @qc: ATA command
static struct ata_port_operations hpt370_port_ops = {
.inherits = &ata_bmdma_port_ops,
- .bmdma_start = hpt370_bmdma_start,
.bmdma_stop = hpt370_bmdma_stop,
.mode_filter = hpt370_filter,
struct ata_port_operations *ops;
unsigned int pio_mask;
unsigned int flags;
+ unsigned int pflags;
int (*setup)(struct platform_device *, struct legacy_probe *probe,
struct legacy_data *data);
};
unsigned char *buf, unsigned int buflen, int rw)
{
int slop = buflen & 3;
+ struct ata_port *ap = dev->link->ap;
+
/* 32bit I/O capable *and* we need to write a whole number of dwords */
- if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)) {
- struct ata_port *ap = dev->link->ap;
+ if (ata_id_has_dword_io(dev->id) && (slop == 0 || slop == 3)
+ && (ap->pflags & ATA_PFLAG_PIO32)) {
unsigned long flags;
local_irq_save(flags);
struct ata_port *ap = adev->link->ap;
int slop = buflen & 3;
- if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)) {
+ if (ata_id_has_dword_io(adev->id) && (slop == 0 || slop == 3)
+ && (ap->pflags & ATA_PFLAG_PIO32)) {
if (rw == WRITE)
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
else
static struct legacy_controller controllers[] = {
{"BIOS", &legacy_port_ops, 0x1F,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY, 0, NULL },
{"Snooping", &simple_port_ops, 0x1F,
- 0 , NULL },
+ 0, 0, NULL },
{"PDC20230", &pdc20230_port_ops, 0x7,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY,
+ ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL },
{"HT6560A", &ht6560a_port_ops, 0x07,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY, 0, NULL },
{"HT6560B", &ht6560b_port_ops, 0x1F,
- ATA_FLAG_NO_IORDY, NULL },
+ ATA_FLAG_NO_IORDY, 0, NULL },
{"OPTI82C611A", &opti82c611a_port_ops, 0x0F,
- 0 , NULL },
+ 0, 0, NULL },
{"OPTI82C46X", &opti82c46x_port_ops, 0x0F,
- 0 , NULL },
+ 0, 0, NULL },
{"QDI6500", &qdi6500_port_ops, 0x07,
- ATA_FLAG_NO_IORDY, qdi_port },
+ ATA_FLAG_NO_IORDY,
+ ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
{"QDI6580", &qdi6580_port_ops, 0x1F,
- 0 , qdi_port },
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
{"QDI6580DP", &qdi6580dp_port_ops, 0x1F,
- 0 , qdi_port },
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port },
{"W83759A", &winbond_port_ops, 0x1F,
- 0 , winbond_port }
+ 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE,
+ winbond_port }
};
/**
ap->ops = ops;
ap->pio_mask = pio_modes;
ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
+ ap->pflags |= controller->pflags;
ap->ioaddr.cmd_addr = io_addr;
ap->ioaddr.altstatus_addr = ctrl_addr;
ap->ioaddr.ctl_addr = ctrl_addr;
return 0;
}
}
+ ata_host_detach(host);
fail:
platform_device_unregister(pdev);
return ret;
#include <linux/libata.h>
#define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.1.3"
+#define DRV_VERSION "0.1.5"
/**
.sff_dev_select = ninja32_dev_select,
.cable_detect = ata_cable_40wire,
.set_piomode = ninja32_set_piomode,
+ .sff_data_xfer = ata_sff_data_xfer32
};
static void ninja32_program(void __iomem *base)
ap->ioaddr.altstatus_addr = base + 0x1E;
ap->ioaddr.bmdma_addr = base;
ata_sff_std_ports(&ap->ioaddr);
+ ap->pflags = ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE;
ninja32_program(base);
/* FIXME: Should we disable them at remove ? */
* pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@lxorguk.ukuu.org.uk>
- * (C) 2007 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2009 Bartlomiej Zolnierkiewicz
*
* Based in part on linux/drivers/ide/pci/pdc202xx_old.c
*
u32 len;
/* Check we keep host level locking here */
- if (adev->dma_mode >= XFER_UDMA_2)
+ if (adev->dma_mode > XFER_UDMA_2)
iowrite8(ioread8(clock) | sel66, clock);
else
iowrite8(ioread8(clock) & ~sel66, clock);
iowrite8(ioread8(clock) & ~sel66, clock);
}
/* Flip back to 33Mhz for PIO */
- if (adev->dma_mode >= XFER_UDMA_2)
+ if (adev->dma_mode > XFER_UDMA_2)
iowrite8(ioread8(clock) & ~sel66, clock);
ata_bmdma_stop(qc);
pdc202xx_set_piomode(ap, adev);
#include <linux/dmi.h>
#define DRV_NAME "pata_via"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
/*
* The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx
{ NULL }
};
+struct via_port {
+ u8 cached_device;
+};
/*
* Cable special cases
*/
static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
{
- struct ata_taskfile tmp_tf;
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+ struct via_port *vp = ap->private_data;
+ unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+ int newctl = 0;
+
+ if (tf->ctl != ap->last_ctl) {
+ iowrite8(tf->ctl, ioaddr->ctl_addr);
+ ap->last_ctl = tf->ctl;
+ ata_wait_idle(ap);
+ newctl = 1;
+ }
+
+ if (tf->flags & ATA_TFLAG_DEVICE) {
+ iowrite8(tf->device, ioaddr->device_addr);
+ vp->cached_device = tf->device;
+ } else if (newctl)
+ iowrite8(vp->cached_device, ioaddr->device_addr);
+
+ if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+ WARN_ON_ONCE(!ioaddr->ctl_addr);
+ iowrite8(tf->hob_feature, ioaddr->feature_addr);
+ iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+ iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+ iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+ iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+ VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+ tf->hob_feature,
+ tf->hob_nsect,
+ tf->hob_lbal,
+ tf->hob_lbam,
+ tf->hob_lbah);
+ }
- if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
- tmp_tf = *tf;
- tmp_tf.flags |= ATA_TFLAG_DEVICE;
- tf = &tmp_tf;
+ if (is_addr) {
+ iowrite8(tf->feature, ioaddr->feature_addr);
+ iowrite8(tf->nsect, ioaddr->nsect_addr);
+ iowrite8(tf->lbal, ioaddr->lbal_addr);
+ iowrite8(tf->lbam, ioaddr->lbam_addr);
+ iowrite8(tf->lbah, ioaddr->lbah_addr);
+ VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+ tf->feature,
+ tf->nsect,
+ tf->lbal,
+ tf->lbam,
+ tf->lbah);
}
- ata_sff_tf_load(ap, tf);
+
+ ata_wait_idle(ap);
+}
+
+static int via_port_start(struct ata_port *ap)
+{
+ struct via_port *vp;
+ struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+ int ret = ata_sff_port_start(ap);
+ if (ret < 0)
+ return ret;
+
+ vp = devm_kzalloc(&pdev->dev, sizeof(struct via_port), GFP_KERNEL);
+ if (vp == NULL)
+ return -ENOMEM;
+ ap->private_data = vp;
+ return 0;
}
static struct scsi_host_template via_sht = {
.set_dmamode = via_set_dmamode,
.prereset = via_pre_reset,
.sff_tf_load = via_tf_load,
+ .port_start = via_port_start,
};
static struct ata_port_operations via_port_ops_noirq = {
* Description information bitdefs
*/
enum {
+ CMD_DESC_RES = (1 << 11),
VENDOR_SPECIFIC_BIST = (1 << 10),
CMD_DESC_SNOOP_ENABLE = (1 << 9),
FPDMA_QUEUED_CMD = (1 << 8),
dma_addr_t sg_addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
- VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
- sg_addr, sg_len);
+ VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
+ (unsigned long long)sg_addr, sg_len);
/* warn if each s/g element is not dword aligned */
if (sg_addr & 0x03)
ata_port_printk(qc->ap, KERN_ERR,
- "s/g addr unaligned : 0x%x\n", sg_addr);
+ "s/g addr unaligned : 0x%llx\n",
+ (unsigned long long)sg_addr);
if (sg_len & 0x03)
ata_port_printk(qc->ap, KERN_ERR,
"s/g len unaligned : 0x%x\n", sg_len);
void __iomem *hcr_base = host_priv->hcr_base;
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
struct command_desc *cd;
- u32 desc_info = CMD_DESC_SNOOP_ENABLE;
+ u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
u32 num_prde = 0;
u32 ttl_dwords = 0;
dma_addr_t cd_paddr;
/* device reset/SRST is a control register update FIS, uses tag0 */
sata_fsl_setup_cmd_hdr_entry(pp, 0,
- SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+ SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
ata_tf_to_fis(&tf, pmp, 0, cfis);
* using ATA signature D2H register FIS to the host controller.
*/
- sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+ sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
+ 0, 0, 5);
tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
ata_tf_to_fis(&tf, pmp, 0, cfis);
FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
+ PHY_MODE9_GEN2 = 0x398,
+ PHY_MODE9_GEN1 = 0x39c,
+ PHYCFG_OFS = 0x3a0, /* only in 65n devices */
+
MV5_PHY_MODE = 0x74,
MV5_LTMODE = 0x30,
MV5_PHY_CTL = 0x0C,
static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
void __iomem *mmio);
static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port);
static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
.reset_bus = mv_soc_reset_bus,
};
+static const struct mv_hw_ops mv_soc_65n_ops = {
+ .phy_errata = mv_soc_65n_phy_errata,
+ .enable_leds = mv_soc_enable_leds,
+ .reset_hc = mv_soc_reset_hc,
+ .reset_flash = mv_soc_reset_flash,
+ .reset_bus = mv_soc_reset_bus,
+};
+
/*
* Functions
*/
return status;
}
+static void mv_rw_multi_errata_sata24(struct ata_queued_cmd *qc)
+{
+ struct ata_taskfile *tf = &qc->tf;
+ /*
+ * Workaround for 88SX60x1 FEr SATA#24.
+ *
+ * Chip may corrupt WRITEs if multi_count >= 4kB.
+ * Note that READs are unaffected.
+ *
+ * It's not clear if this errata really means "4K bytes",
+ * or if it always happens for multi_count > 7
+ * regardless of device sector_size.
+ *
+ * So, for safety, any write with multi_count > 7
+ * gets converted here into a regular PIO write instead:
+ */
+ if ((tf->flags & ATA_TFLAG_WRITE) && is_multi_taskfile(tf)) {
+ if (qc->dev->multi_count > 7) {
+ switch (tf->command) {
+ case ATA_CMD_WRITE_MULTI:
+ tf->command = ATA_CMD_PIO_WRITE;
+ break;
+ case ATA_CMD_WRITE_MULTI_FUA_EXT:
+ tf->flags &= ~ATA_TFLAG_FUA; /* ugh */
+ /* fall through */
+ case ATA_CMD_WRITE_MULTI_EXT:
+ tf->command = ATA_CMD_PIO_WRITE_EXT;
+ break;
+ }
+ }
+ }
+}
+
/**
* mv_qc_prep - Host specific command preparation.
* @qc: queued command to prepare
struct ata_port *ap = qc->ap;
struct mv_port_priv *pp = ap->private_data;
__le16 *cw;
- struct ata_taskfile *tf;
+ struct ata_taskfile *tf = &qc->tf;
u16 flags = 0;
unsigned in_index;
- if ((qc->tf.protocol != ATA_PROT_DMA) &&
- (qc->tf.protocol != ATA_PROT_NCQ))
+ switch (tf->protocol) {
+ case ATA_PROT_DMA:
+ case ATA_PROT_NCQ:
+ break; /* continue below */
+ case ATA_PROT_PIO:
+ mv_rw_multi_errata_sata24(qc);
+ return;
+ default:
return;
+ }
/* Fill in command request block
*/
- if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ if (!(tf->flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
flags |= qc->tag << CRQB_TAG_SHIFT;
pp->crqb[in_index].ctrl_flags = cpu_to_le16(flags);
cw = &pp->crqb[in_index].ata_cmd[0];
- tf = &qc->tf;
/* Sadly, the CRQB cannot accomodate all registers--there are
* only 11 bytes...so we must pick and choose required
struct ata_port *ap = qc->ap;
struct mv_port_priv *pp = ap->private_data;
struct mv_crqb_iie *crqb;
- struct ata_taskfile *tf;
+ struct ata_taskfile *tf = &qc->tf;
unsigned in_index;
u32 flags = 0;
- if ((qc->tf.protocol != ATA_PROT_DMA) &&
- (qc->tf.protocol != ATA_PROT_NCQ))
+ if ((tf->protocol != ATA_PROT_DMA) &&
+ (tf->protocol != ATA_PROT_NCQ))
return;
/* Fill in Gen IIE command request block */
- if (!(qc->tf.flags & ATA_TFLAG_WRITE))
+ if (!(tf->flags & ATA_TFLAG_WRITE))
flags |= CRQB_FLAG_READ;
WARN_ON(MV_MAX_Q_DEPTH <= qc->tag);
crqb->addr_hi = cpu_to_le32((pp->sg_tbl_dma[qc->tag] >> 16) >> 16);
crqb->flags = cpu_to_le32(flags);
- tf = &qc->tf;
crqb->ata_cmd[0] = cpu_to_le32(
(tf->command << 16) |
(tf->feature << 24)
return;
}
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+ u32 reg;
+
+ reg = readl(port_mmio + PHY_MODE3);
+ reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */
+ reg |= (0x1 << 27);
+ reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */
+ reg |= (0x1 << 29);
+ writel(reg, port_mmio + PHY_MODE3);
+
+ reg = readl(port_mmio + PHY_MODE4);
+ reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
+ reg |= (0x1 << 16);
+ writel(reg, port_mmio + PHY_MODE4);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN2);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN2);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN1);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN1);
+}
+
+/**
+ * soc_is_65 - check if the soc is 65 nano device
+ *
+ * Detect the type of the SoC, this is done by reading the PHYCFG_OFS
+ * register, this register should contain non-zero value and it exists only
+ * in the 65 nano devices, when reading it from older devices we get 0.
+ */
+static bool soc_is_65n(struct mv_host_priv *hpriv)
+{
+ void __iomem *port0_mmio = mv_port_base(hpriv->base, 0);
+
+ if (readl(port0_mmio + PHYCFG_OFS))
+ return true;
+ return false;
+}
+
static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
{
u32 ifcfg = readl(port_mmio + SATA_IFCFG);
}
break;
case chip_soc:
- hpriv->ops = &mv_soc_ops;
+ if (soc_is_65n(hpriv))
+ hpriv->ops = &mv_soc_65n_ops;
+ else
+ hpriv->ops = &mv_soc_ops;
hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
MV_HP_ERRATA_60X1C0;
break;
n_hc = mv_get_hc_count(host->ports[0]->flags);
for (port = 0; port < host->n_ports; port++)
- hpriv->ops->read_preamp(hpriv, port, mmio);
+ if (hpriv->ops->read_preamp)
+ hpriv->ops->read_preamp(hpriv, port, mmio);
rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
if (rc)
static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc_eng_timeout(struct ata_port *ap);
-static void pdc_20621_phy_reset(struct ata_port *ap);
+static void pdc_error_handler(struct ata_port *ap);
+static void pdc_freeze(struct ata_port *ap);
+static void pdc_thaw(struct ata_port *ap);
static int pdc_port_start(struct ata_port *ap);
static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
void *psource, u32 offset, u32 size);
static void pdc20621_irq_clear(struct ata_port *ap);
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
static struct scsi_host_template pdc_sata_sht = {
/* TODO: inherit from base port_ops after converting to new EH */
static struct ata_port_operations pdc_20621_ops = {
- .sff_tf_load = pdc_tf_load_mmio,
- .sff_tf_read = ata_sff_tf_read,
- .sff_check_status = ata_sff_check_status,
- .sff_exec_command = pdc_exec_command_mmio,
- .sff_dev_select = ata_sff_dev_select,
- .phy_reset = pdc_20621_phy_reset,
+ .inherits = &ata_sff_port_ops,
+
+ .check_atapi_dma = pdc_check_atapi_dma,
.qc_prep = pdc20621_qc_prep,
.qc_issue = pdc20621_qc_issue,
- .qc_fill_rtf = ata_sff_qc_fill_rtf,
- .sff_data_xfer = ata_sff_data_xfer,
- .eng_timeout = pdc_eng_timeout,
- .sff_irq_clear = pdc20621_irq_clear,
- .sff_irq_on = ata_sff_irq_on,
+
+ .freeze = pdc_freeze,
+ .thaw = pdc_thaw,
+ .softreset = pdc_softreset,
+ .error_handler = pdc_error_handler,
+ .lost_interrupt = ATA_OP_NULL,
+ .post_internal_cmd = pdc_post_internal_cmd,
+
.port_start = pdc_port_start,
+
+ .sff_tf_load = pdc_tf_load_mmio,
+ .sff_exec_command = pdc_exec_command_mmio,
+ .sff_irq_clear = pdc20621_irq_clear,
};
static const struct ata_port_info pdc_port_info[] = {
return 0;
}
-static void pdc_20621_phy_reset(struct ata_port *ap)
-{
- VPRINTK("ENTER\n");
- ap->cbl = ATA_CBL_SATA;
- ata_port_probe(ap);
- ata_bus_reset(ap);
-}
-
static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
unsigned int portno,
unsigned int total_len)
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
- case ATA_PROT_DMA:
case ATA_PROT_NODATA:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ break;
+ /*FALLTHROUGH*/
+ case ATA_PROT_DMA:
pdc20621_packet_start(qc);
return 0;
static void pdc20621_irq_clear(struct ata_port *ap)
{
- struct ata_host *host = ap->host;
- void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
-
- mmio += PDC_CHIP0_OFS;
-
- readl(mmio + PDC_20621_SEQMASK);
+ ioread8(ap->ioaddr.status_addr);
}
static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
return IRQ_RETVAL(handled);
}
-static void pdc_eng_timeout(struct ata_port *ap)
+static void pdc_freeze(struct ata_port *ap)
{
- u8 drv_stat;
- struct ata_host *host = ap->host;
- struct ata_queued_cmd *qc;
- unsigned long flags;
+ void __iomem *mmio = ap->ioaddr.cmd_addr;
+ u32 tmp;
- DPRINTK("ENTER\n");
+ /* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */
- spin_lock_irqsave(&host->lock, flags);
+ tmp = readl(mmio + PDC_CTLSTAT);
+ tmp |= PDC_MASK_INT;
+ tmp &= ~PDC_DMA_ENABLE;
+ writel(tmp, mmio + PDC_CTLSTAT);
+ readl(mmio + PDC_CTLSTAT); /* flush */
+}
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
+static void pdc_thaw(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.cmd_addr;
+ u32 tmp;
- switch (qc->tf.protocol) {
- case ATA_PROT_DMA:
- case ATA_PROT_NODATA:
- ata_port_printk(ap, KERN_ERR, "command timeout\n");
- qc->err_mask |= __ac_err_mask(ata_wait_idle(ap));
- break;
+ /* FIXME: start HDMA engine, if zero ATA engines running */
- default:
- drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+ /* clear IRQ */
+ ioread8(ap->ioaddr.status_addr);
- ata_port_printk(ap, KERN_ERR,
- "unknown timeout, cmd 0x%x stat 0x%x\n",
- qc->tf.command, drv_stat);
+ /* turn IRQ back on */
+ tmp = readl(mmio + PDC_CTLSTAT);
+ tmp &= ~PDC_MASK_INT;
+ writel(tmp, mmio + PDC_CTLSTAT);
+ readl(mmio + PDC_CTLSTAT); /* flush */
+}
- qc->err_mask |= ac_err_mask(drv_stat);
- break;
+static void pdc_reset_port(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
+ unsigned int i;
+ u32 tmp;
+
+ /* FIXME: handle HDMA copy engine */
+
+ for (i = 11; i > 0; i--) {
+ tmp = readl(mmio);
+ if (tmp & PDC_RESET)
+ break;
+
+ udelay(100);
+
+ tmp |= PDC_RESET;
+ writel(tmp, mmio);
}
- spin_unlock_irqrestore(&host->lock, flags);
- ata_eh_qc_complete(qc);
- DPRINTK("EXIT\n");
+ tmp &= ~PDC_RESET;
+ writel(tmp, mmio);
+ readl(mmio); /* flush */
+}
+
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ pdc_reset_port(link->ap);
+ return ata_sff_softreset(link, class, deadline);
+}
+
+static void pdc_error_handler(struct ata_port *ap)
+{
+ if (!(ap->pflags & ATA_PFLAG_FROZEN))
+ pdc_reset_port(ap);
+
+ ata_std_error_handler(ap);
+}
+
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* make DMA engine forget about the failed command */
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ pdc_reset_port(ap);
+}
+
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ u8 *scsicmd = qc->scsicmd->cmnd;
+ int pio = 1; /* atapi dma off by default */
+
+ /* Whitelist commands that may use DMA. */
+ switch (scsicmd[0]) {
+ case WRITE_12:
+ case WRITE_10:
+ case WRITE_6:
+ case READ_12:
+ case READ_10:
+ case READ_6:
+ case 0xad: /* READ_DVD_STRUCTURE */
+ case 0xbe: /* READ_CD */
+ pio = 0;
+ }
+ /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
+ if (scsicmd[0] == WRITE_10) {
+ unsigned int lba =
+ (scsicmd[2] << 24) |
+ (scsicmd[3] << 16) |
+ (scsicmd[4] << 8) |
+ scsicmd[5];
+ if (lba >= 0xFFFF4FA2)
+ pio = 1;
+ }
+ return pio;
}
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ tf->protocol == ATAPI_PROT_DMA);
ata_sff_tf_load(ap, tf);
}
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ tf->protocol == ATAPI_PROT_DMA);
ata_sff_exec_command(ap, tf);
}
goto out;
}
- err = pci_set_dma_mask(dev, DMA_32BIT_MASK);
+ err = pci_set_dma_mask(dev, DMA_BIT_MASK(32));
if (err) {
dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
goto out;
static inline int driver_match_device(struct device_driver *drv,
struct device *dev)
{
- return drv->bus->match && drv->bus->match(dev, drv);
+ return drv->bus->match ? drv->bus->match(dev, drv) : 1;
}
extern void sysdev_shutdown(void);
set_dev_node(dev, dev_to_node(parent));
/* first, register with generic layer. */
- error = kobject_add(&dev->kobj, dev->kobj.parent, "%s", dev_name(dev));
+ /* we require the name to be set before, and pass NULL */
+ error = kobject_add(&dev->kobj, dev->kobj.parent, NULL);
if (error)
goto Error;
struct device *child;
int error = 0;
+ if (!parent->p)
+ return 0;
+
klist_iter_init(&parent->p->klist_children, &i);
while ((child = next_device(&i)) && !error)
error = fn(child, data);
wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
async_synchronize_full();
}
+EXPORT_SYMBOL_GPL(wait_for_device_probe);
/**
* driver_probe_device - attempt to bind device & driver together
#include <linux/bug.h>
#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/iommu.h>
if (d) {
memcpy(d, data, size);
pdev->dev.platform_data = d;
- pdev->platform_data = d;
}
return d ? 0 : -ENOMEM;
}
else
dev_set_name(&pdev->dev, pdev->name);
- /* We will remove platform_data field from struct device
- * if all platform devices pass its platform specific data
- * from platform_device. The conversion is going to be a
- * long time, so we allow the two cases coexist to make
- * this kind of fix more easily*/
- if (pdev->platform_data && pdev->dev.platform_data) {
- printk(KERN_ERR
- "%s: use which platform_data?\n",
- dev_name(&pdev->dev));
- } else if (pdev->platform_data) {
- pdev->dev.platform_data = pdev->platform_data;
- } else if (pdev->dev.platform_data) {
- pdev->platform_data = pdev->dev.platform_data;
- }
-
for (i = 0; i < pdev->num_resources; i++) {
struct resource *p, *r = &pdev->resource[i];
{
int error;
+ early_platform_cleanup();
+
error = device_register(&platform_bus);
if (error)
return error;
}
EXPORT_SYMBOL_GPL(dma_get_required_mask);
#endif
+
+static __initdata LIST_HEAD(early_platform_driver_list);
+static __initdata LIST_HEAD(early_platform_device_list);
+
+/**
+ * early_platform_driver_register
+ * @epdrv: early_platform driver structure
+ * @buf: string passed from early_param()
+ */
+int __init early_platform_driver_register(struct early_platform_driver *epdrv,
+ char *buf)
+{
+ unsigned long index;
+ int n;
+
+ /* Simply add the driver to the end of the global list.
+ * Drivers will by default be put on the list in compiled-in order.
+ */
+ if (!epdrv->list.next) {
+ INIT_LIST_HEAD(&epdrv->list);
+ list_add_tail(&epdrv->list, &early_platform_driver_list);
+ }
+
+ /* If the user has specified device then make sure the driver
+ * gets prioritized. The driver of the last device specified on
+ * command line will be put first on the list.
+ */
+ n = strlen(epdrv->pdrv->driver.name);
+ if (buf && !strncmp(buf, epdrv->pdrv->driver.name, n)) {
+ list_move(&epdrv->list, &early_platform_driver_list);
+
+ if (!strcmp(buf, epdrv->pdrv->driver.name))
+ epdrv->requested_id = -1;
+ else if (buf[n] == '.' && strict_strtoul(&buf[n + 1], 10,
+ &index) == 0)
+ epdrv->requested_id = index;
+ else
+ epdrv->requested_id = EARLY_PLATFORM_ID_ERROR;
+ }
+
+ return 0;
+}
+
+/**
+ * early_platform_add_devices - add a numbers of early platform devices
+ * @devs: array of early platform devices to add
+ * @num: number of early platform devices in array
+ */
+void __init early_platform_add_devices(struct platform_device **devs, int num)
+{
+ struct device *dev;
+ int i;
+
+ /* simply add the devices to list */
+ for (i = 0; i < num; i++) {
+ dev = &devs[i]->dev;
+
+ if (!dev->devres_head.next) {
+ INIT_LIST_HEAD(&dev->devres_head);
+ list_add_tail(&dev->devres_head,
+ &early_platform_device_list);
+ }
+ }
+}
+
+/**
+ * early_platform_driver_register_all
+ * @class_str: string to identify early platform driver class
+ */
+void __init early_platform_driver_register_all(char *class_str)
+{
+ /* The "class_str" parameter may or may not be present on the kernel
+ * command line. If it is present then there may be more than one
+ * matching parameter.
+ *
+ * Since we register our early platform drivers using early_param()
+ * we need to make sure that they also get registered in the case
+ * when the parameter is missing from the kernel command line.
+ *
+ * We use parse_early_options() to make sure the early_param() gets
+ * called at least once. The early_param() may be called more than
+ * once since the name of the preferred device may be specified on
+ * the kernel command line. early_platform_driver_register() handles
+ * this case for us.
+ */
+ parse_early_options(class_str);
+}
+
+/**
+ * early_platform_match
+ * @epdrv: early platform driver structure
+ * @id: id to match against
+ */
+static __init struct platform_device *
+early_platform_match(struct early_platform_driver *epdrv, int id)
+{
+ struct platform_device *pd;
+
+ list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+ if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+ if (pd->id == id)
+ return pd;
+
+ return NULL;
+}
+
+/**
+ * early_platform_left
+ * @epdrv: early platform driver structure
+ * @id: return true if id or above exists
+ */
+static __init int early_platform_left(struct early_platform_driver *epdrv,
+ int id)
+{
+ struct platform_device *pd;
+
+ list_for_each_entry(pd, &early_platform_device_list, dev.devres_head)
+ if (platform_match(&pd->dev, &epdrv->pdrv->driver))
+ if (pd->id >= id)
+ return 1;
+
+ return 0;
+}
+
+/**
+ * early_platform_driver_probe_id
+ * @class_str: string to identify early platform driver class
+ * @id: id to match against
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ */
+static int __init early_platform_driver_probe_id(char *class_str,
+ int id,
+ int nr_probe)
+{
+ struct early_platform_driver *epdrv;
+ struct platform_device *match;
+ int match_id;
+ int n = 0;
+ int left = 0;
+
+ list_for_each_entry(epdrv, &early_platform_driver_list, list) {
+ /* only use drivers matching our class_str */
+ if (strcmp(class_str, epdrv->class_str))
+ continue;
+
+ if (id == -2) {
+ match_id = epdrv->requested_id;
+ left = 1;
+
+ } else {
+ match_id = id;
+ left += early_platform_left(epdrv, id);
+
+ /* skip requested id */
+ switch (epdrv->requested_id) {
+ case EARLY_PLATFORM_ID_ERROR:
+ case EARLY_PLATFORM_ID_UNSET:
+ break;
+ default:
+ if (epdrv->requested_id == id)
+ match_id = EARLY_PLATFORM_ID_UNSET;
+ }
+ }
+
+ switch (match_id) {
+ case EARLY_PLATFORM_ID_ERROR:
+ pr_warning("%s: unable to parse %s parameter\n",
+ class_str, epdrv->pdrv->driver.name);
+ /* fall-through */
+ case EARLY_PLATFORM_ID_UNSET:
+ match = NULL;
+ break;
+ default:
+ match = early_platform_match(epdrv, match_id);
+ }
+
+ if (match) {
+ if (epdrv->pdrv->probe(match))
+ pr_warning("%s: unable to probe %s early.\n",
+ class_str, match->name);
+ else
+ n++;
+ }
+
+ if (n >= nr_probe)
+ break;
+ }
+
+ if (left)
+ return n;
+ else
+ return -ENODEV;
+}
+
+/**
+ * early_platform_driver_probe
+ * @class_str: string to identify early platform driver class
+ * @nr_probe: number of platform devices to successfully probe before exiting
+ * @user_only: only probe user specified early platform devices
+ */
+int __init early_platform_driver_probe(char *class_str,
+ int nr_probe,
+ int user_only)
+{
+ int k, n, i;
+
+ n = 0;
+ for (i = -2; n < nr_probe; i++) {
+ k = early_platform_driver_probe_id(class_str, i, nr_probe - n);
+
+ if (k < 0)
+ break;
+
+ n += k;
+
+ if (user_only)
+ break;
+ }
+
+ return n;
+}
+
+/**
+ * early_platform_cleanup - clean up early platform code
+ */
+void __init early_platform_cleanup(void)
+{
+ struct platform_device *pd, *pd2;
+
+ /* clean up the devres list used to chain devices */
+ list_for_each_entry_safe(pd, pd2, &early_platform_device_list,
+ dev.devres_head) {
+ list_del(&pd->dev.devres_head);
+ memset(&pd->dev.devres_head, 0, sizeof(pd->dev.devres_head));
+ }
+}
+
if (rw == READ) {
copy_from_brd(mem + off, brd, sector, len);
flush_dcache_page(page);
- } else
+ } else {
+ flush_dcache_page(page);
copy_to_brd(brd, mem + off, sector, len);
+ }
kunmap_atomic(mem, KM_USER0);
out:
if (!brd->brd_queue)
goto out_free_dev;
blk_queue_make_request(brd->brd_queue, brd_make_request);
+ blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_TAG, NULL);
blk_queue_max_sectors(brd->brd_queue, 1024);
blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
/* The Inbound Post Queue only accepts 32-bit physical addresses for the
CCISS commands, so they must be allocated from the lower 4GiB of
memory. */
- err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
iounmap(vaddr);
return -ENOMEM;
if (i > 0) {
SET_HANDLER(&write_intr);
outsw(HD_DATA, req->buffer, 256);
- local_irq_enable();
} else {
#if (HD_DELAY > 0)
last_req = read_timer();
if (!CURRENT)
return;
- disable_irq(HD_IRQ);
- local_irq_enable();
+ spin_lock_irq(hd_queue->queue_lock);
reset = 1;
name = CURRENT->rq_disk->disk_name;
printk("%s: timeout\n", name);
#endif
end_request(CURRENT, 0);
}
- local_irq_disable();
hd_request();
- enable_irq(HD_IRQ);
+ spin_unlock_irq(hd_queue->queue_lock);
}
static int do_special_op(struct hd_i_struct *disk, struct request *req)
return;
repeat:
del_timer(&device_timer);
- local_irq_enable();
req = CURRENT;
if (!req) {
}
if (reset) {
- local_irq_disable();
reset_hd();
return;
}
static void do_hd_request(struct request_queue *q)
{
- disable_irq(HD_IRQ);
hd_request();
- enable_irq(HD_IRQ);
}
static int hd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
void (*handler)(void) = do_hd;
+ spin_lock(hd_queue->queue_lock);
+
do_hd = NULL;
del_timer(&device_timer);
if (!handler)
handler = unexpected_hd_interrupt;
handler();
- local_irq_enable();
+
+ spin_unlock(hd_queue->queue_lock);
+
return IRQ_HANDLED;
}
if (host->breq) {
req = elv_next_request(host->breq);
if (req)
- printk(", sector=%ld", req->sector);
+ printk(", sector=%u", (u32)req->sector);
}
}
struct mg_host *host = dev_id;
void (*handler)(struct mg_host *) = host->mg_do_intr;
- host->mg_do_intr = 0;
+ spin_lock(&host->lock);
+
+ host->mg_do_intr = NULL;
del_timer(&host->timer);
if (!handler)
handler = mg_unexpected_intr;
handler(host);
+
+ spin_unlock(&host->lock);
+
return IRQ_HANDLED;
}
remains = req->nr_sectors;
- if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, 0) !=
+ if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_RD, NULL) !=
MG_ERR_NONE)
mg_bad_rw_intr(host);
remains = req->nr_sectors;
- if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, 0) !=
+ if (mg_out(host, req->sector, req->nr_sectors, MG_CMD_WR, NULL) !=
MG_ERR_NONE) {
mg_bad_rw_intr(host);
return;
char *name;
struct request *req;
+ spin_lock_irq(&host->lock);
+
req = elv_next_request(host->breq);
if (!req)
- return;
+ goto out_unlock;
host->mg_do_intr = NULL;
mg_bad_rw_intr(host);
mg_request(host->breq);
+out_unlock:
+ spin_unlock_irq(&host->lock);
}
static void mg_request_poll(struct request_queue *q)
{
struct urb *urb = &sc->work_urb;
struct bulk_cs_wrap *bcs;
+ int endp;
int len;
int rc;
return;
}
+ endp = usb_pipeendpoint(sc->last_pipe);
+ if (usb_pipein(sc->last_pipe))
+ endp |= USB_DIR_IN;
+
if (cmd->state == UB_CMDST_CLEAR) {
if (urb->status == -EPIPE) {
/*
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_sense(sc, cmd);
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_stat(sc, cmd);
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_stat_counted(sc, cmd);
del_timer_sync(&timer);
usb_kill_urb(&sc->work_urb);
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
return 0;
}
goto failed_alloc;
blk_queue_make_request(card->queue, mm_make_request);
+ card->queue->queue_lock = &card->lock;
card->queue->queuedata = card;
card->queue->unplug_fn = mm_unplug_device;
int i, ret = -ENOMEM;
for (i = 0; i < num_pages; i++) {
- page = alloc_page(GFP_KERNEL | GFP_DMA32);
+ page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
/* agp_free_memory() needs gart address */
if (page == NULL)
goto out;
{
struct page * page;
- page = alloc_page(GFP_KERNEL | GFP_DMA32);
+ page = alloc_page(GFP_KERNEL | GFP_DMA32 | __GFP_ZERO);
if (page == NULL)
return NULL;
{ PCI_DEVICE_ID_INTEL_82845G_HB, PCI_DEVICE_ID_INTEL_82845G_IG, 0, "830M",
&intel_845_driver, &intel_830_driver },
{ PCI_DEVICE_ID_INTEL_82850_HB, 0, 0, "i850", &intel_850_driver, NULL },
+ { PCI_DEVICE_ID_INTEL_82854_HB, PCI_DEVICE_ID_INTEL_82854_IG, 0, "854",
+ &intel_845_driver, &intel_830_driver },
{ PCI_DEVICE_ID_INTEL_82855PM_HB, 0, 0, "855PM", &intel_845_driver, NULL },
{ PCI_DEVICE_ID_INTEL_82855GM_HB, PCI_DEVICE_ID_INTEL_82855GM_IG, 0, "855GM",
&intel_845_driver, &intel_830_driver },
ID(PCI_DEVICE_ID_INTEL_82845_HB),
ID(PCI_DEVICE_ID_INTEL_82845G_HB),
ID(PCI_DEVICE_ID_INTEL_82850_HB),
+ ID(PCI_DEVICE_ID_INTEL_82854_HB),
ID(PCI_DEVICE_ID_INTEL_82855PM_HB),
ID(PCI_DEVICE_ID_INTEL_82855GM_HB),
ID(PCI_DEVICE_ID_INTEL_82860_HB),
#ifdef CONFIG_IA64
static void __iomem *hpet_mctr;
-static cycle_t read_hpet(void)
+static cycle_t read_hpet(struct clocksource *cs)
{
return (cycle_t)read_counter((void __iomem *)hpet_mctr);
}
{
int len;
- /* We never get spurious callbacks. */
+ /* We can get spurious callbacks, e.g. shared IRQs + virtio_pci. */
if (!vq->vq_ops->get_buf(vq, &len))
- BUG();
+ return;
data_left = len / sizeof(random_data[0]);
complete(&have_data);
/* Events that were received with the proper format. */
IPMI_STAT_events,
+ /* Retransmissions on IPMB that failed. */
+ IPMI_STAT_dropped_rexmit_ipmb_commands,
+
+ /* Retransmissions on LAN that failed. */
+ IPMI_STAT_dropped_rexmit_lan_commands,
/* This *must* remain last, add new values above this. */
IPMI_NUM_STATS
#define ipmi_get_stat(intf, stat) \
((unsigned int) atomic_read(&(intf)->stats[IPMI_STAT_ ## stat]))
+static int is_lan_addr(struct ipmi_addr *addr)
+{
+ return addr->addr_type == IPMI_LAN_ADDR_TYPE;
+}
+
+static int is_ipmb_addr(struct ipmi_addr *addr)
+{
+ return addr->addr_type == IPMI_IPMB_ADDR_TYPE;
+}
+
+static int is_ipmb_bcast_addr(struct ipmi_addr *addr)
+{
+ return addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE;
+}
static void free_recv_msg_list(struct list_head *q)
{
return (smi_addr1->lun == smi_addr2->lun);
}
- if ((addr1->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr1->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ if (is_ipmb_addr(addr1) || is_ipmb_bcast_addr(addr1)) {
struct ipmi_ipmb_addr *ipmb_addr1
= (struct ipmi_ipmb_addr *) addr1;
struct ipmi_ipmb_addr *ipmb_addr2
&& (ipmb_addr1->lun == ipmb_addr2->lun));
}
- if (addr1->addr_type == IPMI_LAN_ADDR_TYPE) {
+ if (is_lan_addr(addr1)) {
struct ipmi_lan_addr *lan_addr1
= (struct ipmi_lan_addr *) addr1;
struct ipmi_lan_addr *lan_addr2
|| (addr->channel < 0))
return -EINVAL;
- if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
if (len < sizeof(struct ipmi_ipmb_addr))
return -EINVAL;
return 0;
}
- if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+ if (is_lan_addr(addr)) {
if (len < sizeof(struct ipmi_lan_addr))
return -EINVAL;
return 0;
memcpy(&(smi_msg->data[2]), msg->data, msg->data_len);
smi_msg->data_size = msg->data_len + 2;
ipmi_inc_stat(intf, sent_local_commands);
- } else if ((addr->addr_type == IPMI_IPMB_ADDR_TYPE)
- || (addr->addr_type == IPMI_IPMB_BROADCAST_ADDR_TYPE)) {
+ } else if (is_ipmb_addr(addr) || is_ipmb_bcast_addr(addr)) {
struct ipmi_ipmb_addr *ipmb_addr;
unsigned char ipmb_seq;
long seqid;
spin_lock_irqsave(&(intf->seq_lock), flags);
- ipmi_inc_stat(intf, sent_ipmb_commands);
-
/*
* Create a sequence number with a 1 second
* timeout and 4 retries.
goto out_err;
}
+ ipmi_inc_stat(intf, sent_ipmb_commands);
+
/*
* Store the sequence number in the message,
* so that when the send message response
*/
spin_unlock_irqrestore(&(intf->seq_lock), flags);
}
- } else if (addr->addr_type == IPMI_LAN_ADDR_TYPE) {
+ } else if (is_lan_addr(addr)) {
struct ipmi_lan_addr *lan_addr;
unsigned char ipmb_seq;
long seqid;
spin_lock_irqsave(&(intf->seq_lock), flags);
- ipmi_inc_stat(intf, sent_lan_commands);
-
/*
* Create a sequence number with a 1 second
* timeout and 4 retries.
goto out_err;
}
+ ipmi_inc_stat(intf, sent_lan_commands);
+
/*
* Store the sequence number in the message,
* so that when the send message response
ipmi_get_stat(intf, invalid_events));
out += sprintf(out, "events: %u\n",
ipmi_get_stat(intf, events));
+ out += sprintf(out, "failed rexmit LAN msgs: %u\n",
+ ipmi_get_stat(intf, dropped_rexmit_lan_commands));
+ out += sprintf(out, "failed rexmit IPMB msgs: %u\n",
+ ipmi_get_stat(intf, dropped_rexmit_ipmb_commands));
return (out - ((char *) page));
}
return rv;
}
+/*
+ * This routine will handle "Get Message" command responses with
+ * channels that use an OEM Medium. The message format belongs to
+ * the OEM. See IPMI 2.0 specification, Chapter 6 and
+ * Chapter 22, sections 22.6 and 22.24 for more details.
+ */
+static int handle_oem_get_msg_cmd(ipmi_smi_t intf,
+ struct ipmi_smi_msg *msg)
+{
+ struct cmd_rcvr *rcvr;
+ int rv = 0;
+ unsigned char netfn;
+ unsigned char cmd;
+ unsigned char chan;
+ ipmi_user_t user = NULL;
+ struct ipmi_system_interface_addr *smi_addr;
+ struct ipmi_recv_msg *recv_msg;
+
+ /*
+ * We expect the OEM SW to perform error checking
+ * so we just do some basic sanity checks
+ */
+ if (msg->rsp_size < 4) {
+ /* Message not big enough, just ignore it. */
+ ipmi_inc_stat(intf, invalid_commands);
+ return 0;
+ }
+
+ if (msg->rsp[2] != 0) {
+ /* An error getting the response, just ignore it. */
+ return 0;
+ }
+
+ /*
+ * This is an OEM Message so the OEM needs to know how
+ * handle the message. We do no interpretation.
+ */
+ netfn = msg->rsp[0] >> 2;
+ cmd = msg->rsp[1];
+ chan = msg->rsp[3] & 0xf;
+
+ rcu_read_lock();
+ rcvr = find_cmd_rcvr(intf, netfn, cmd, chan);
+ if (rcvr) {
+ user = rcvr->user;
+ kref_get(&user->refcount);
+ } else
+ user = NULL;
+ rcu_read_unlock();
+
+ if (user == NULL) {
+ /* We didn't find a user, just give up. */
+ ipmi_inc_stat(intf, unhandled_commands);
+
+ /*
+ * Don't do anything with these messages, just allow
+ * them to be freed.
+ */
+
+ rv = 0;
+ } else {
+ /* Deliver the message to the user. */
+ ipmi_inc_stat(intf, handled_commands);
+
+ recv_msg = ipmi_alloc_recv_msg();
+ if (!recv_msg) {
+ /*
+ * We couldn't allocate memory for the
+ * message, so requeue it for handling
+ * later.
+ */
+ rv = 1;
+ kref_put(&user->refcount, free_user);
+ } else {
+ /*
+ * OEM Messages are expected to be delivered via
+ * the system interface to SMS software. We might
+ * need to visit this again depending on OEM
+ * requirements
+ */
+ smi_addr = ((struct ipmi_system_interface_addr *)
+ &(recv_msg->addr));
+ smi_addr->addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ smi_addr->channel = IPMI_BMC_CHANNEL;
+ smi_addr->lun = msg->rsp[0] & 3;
+
+ recv_msg->user = user;
+ recv_msg->user_msg_data = NULL;
+ recv_msg->recv_type = IPMI_OEM_RECV_TYPE;
+ recv_msg->msg.netfn = msg->rsp[0] >> 2;
+ recv_msg->msg.cmd = msg->rsp[1];
+ recv_msg->msg.data = recv_msg->msg_data;
+
+ /*
+ * The message starts at byte 4 which follows the
+ * the Channel Byte in the "GET MESSAGE" command
+ */
+ recv_msg->msg.data_len = msg->rsp_size - 4;
+ memcpy(recv_msg->msg_data,
+ &(msg->rsp[4]),
+ msg->rsp_size - 4);
+ deliver_response(recv_msg);
+ }
+ }
+
+ return rv;
+}
+
static void copy_event_into_recv_msg(struct ipmi_recv_msg *recv_msg,
struct ipmi_smi_msg *msg)
{
goto out;
}
+ /*
+ ** We need to make sure the channels have been initialized.
+ ** The channel_handler routine will set the "curr_channel"
+ ** equal to or greater than IPMI_MAX_CHANNELS when all the
+ ** channels for this interface have been initialized.
+ */
+ if (intf->curr_channel < IPMI_MAX_CHANNELS) {
+ requeue = 1; /* Just put the message back for now */
+ goto out;
+ }
+
switch (intf->channels[chan].medium) {
case IPMI_CHANNEL_MEDIUM_IPMB:
if (msg->rsp[4] & 0x04) {
break;
default:
- /*
- * We don't handle the channel type, so just
- * free the message.
- */
- requeue = 0;
+ /* Check for OEM Channels. Clients had better
+ register for these commands. */
+ if ((intf->channels[chan].medium
+ >= IPMI_CHANNEL_MEDIUM_OEM_MIN)
+ && (intf->channels[chan].medium
+ <= IPMI_CHANNEL_MEDIUM_OEM_MAX)) {
+ requeue = handle_oem_get_msg_cmd(intf, msg);
+ } else {
+ /*
+ * We don't handle the channel type, so just
+ * free the message.
+ */
+ requeue = 0;
+ }
}
} else if ((msg->rsp[0] == ((IPMI_NETFN_APP_REQUEST|1) << 2))
list_add_tail(&msg->link, timeouts);
if (ent->broadcast)
ipmi_inc_stat(intf, timed_out_ipmb_broadcasts);
- else if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
+ else if (is_lan_addr(&ent->recv_msg->addr))
ipmi_inc_stat(intf, timed_out_lan_commands);
else
ipmi_inc_stat(intf, timed_out_ipmb_commands);
*/
ent->timeout = MAX_MSG_TIMEOUT;
ent->retries_left--;
- if (ent->recv_msg->addr.addr_type == IPMI_LAN_ADDR_TYPE)
- ipmi_inc_stat(intf, retransmitted_lan_commands);
- else
- ipmi_inc_stat(intf, retransmitted_ipmb_commands);
-
smi_msg = smi_from_recv_msg(intf, ent->recv_msg, slot,
ent->seqid);
- if (!smi_msg)
+ if (!smi_msg) {
+ if (is_lan_addr(&ent->recv_msg->addr))
+ ipmi_inc_stat(intf,
+ dropped_rexmit_lan_commands);
+ else
+ ipmi_inc_stat(intf,
+ dropped_rexmit_ipmb_commands);
return;
+ }
spin_unlock_irqrestore(&intf->seq_lock, *flags);
* resent.
*/
handlers = intf->handlers;
- if (handlers)
+ if (handlers) {
+ if (is_lan_addr(&ent->recv_msg->addr))
+ ipmi_inc_stat(intf,
+ retransmitted_lan_commands);
+ else
+ ipmi_inc_stat(intf,
+ retransmitted_ipmb_commands);
+
intf->handlers->sender(intf->send_info,
smi_msg, 0);
- else
+ } else
ipmi_free_smi_msg(smi_msg);
spin_lock_irqsave(&intf->seq_lock, *flags);
#define SI_SHORT_TIMEOUT_USEC 250 /* .25ms when the SM request a
short timeout */
-/* Bit for BMC global enables. */
-#define IPMI_BMC_RCV_MSG_INTR 0x01
-#define IPMI_BMC_EVT_MSG_INTR 0x02
-#define IPMI_BMC_EVT_MSG_BUFF 0x04
-#define IPMI_BMC_SYS_LOG 0x08
-
enum si_intf_state {
SI_NORMAL,
SI_GETTING_FLAGS,
OEM2_DATA_AVAIL)
unsigned char msg_flags;
+ /* Does the BMC have an event buffer? */
+ char has_event_buffer;
+
/*
* If set to true, this will request events the next time the
* state machine is idle.
{
struct smi_info *smi_info = send_info;
- if (atomic_read(&smi_info->stop_operation))
+ if (atomic_read(&smi_info->stop_operation) ||
+ !smi_info->has_event_buffer)
return;
atomic_set(&smi_info->req_events, 1);
};
#endif /* CONFIG_PPC_OF */
-
-static int try_get_dev_id(struct smi_info *smi_info)
+static int wait_for_msg_done(struct smi_info *smi_info)
{
- unsigned char msg[2];
- unsigned char *resp;
- unsigned long resp_len;
enum si_sm_result smi_result;
- int rv = 0;
-
- resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
- if (!resp)
- return -ENOMEM;
-
- /*
- * Do a Get Device ID command, since it comes back with some
- * useful info.
- */
- msg[0] = IPMI_NETFN_APP_REQUEST << 2;
- msg[1] = IPMI_GET_DEVICE_ID_CMD;
- smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
smi_result = smi_info->handlers->event(smi_info->si_sm, 0);
for (;;) {
} else
break;
}
- if (smi_result == SI_SM_HOSED) {
+ if (smi_result == SI_SM_HOSED)
/*
* We couldn't get the state machine to run, so whatever's at
* the port is probably not an IPMI SMI interface.
*/
- rv = -ENODEV;
+ return -ENODEV;
+
+ return 0;
+}
+
+static int try_get_dev_id(struct smi_info *smi_info)
+{
+ unsigned char msg[2];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ /*
+ * Do a Get Device ID command, since it comes back with some
+ * useful info.
+ */
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_DEVICE_ID_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv)
goto out;
- }
- /* Otherwise, we got some data. */
resp_len = smi_info->handlers->get_result(smi_info->si_sm,
resp, IPMI_MAX_MSG_LENGTH);
return rv;
}
+static int try_enable_event_buffer(struct smi_info *smi_info)
+{
+ unsigned char msg[3];
+ unsigned char *resp;
+ unsigned long resp_len;
+ int rv = 0;
+
+ resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL);
+ if (!resp)
+ return -ENOMEM;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_GET_BMC_GLOBAL_ENABLES_CMD;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 2);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING
+ "ipmi_si: Error getting response from get global,"
+ " enables command, the event buffer is not"
+ " enabled.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 4 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_GET_BMC_GLOBAL_ENABLES_CMD ||
+ resp[2] != 0) {
+ printk(KERN_WARNING
+ "ipmi_si: Invalid return from get global"
+ " enables command, cannot enable the event"
+ " buffer.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if (resp[3] & IPMI_BMC_EVT_MSG_BUFF)
+ /* buffer is already enabled, nothing to do. */
+ goto out;
+
+ msg[0] = IPMI_NETFN_APP_REQUEST << 2;
+ msg[1] = IPMI_SET_BMC_GLOBAL_ENABLES_CMD;
+ msg[2] = resp[3] | IPMI_BMC_EVT_MSG_BUFF;
+ smi_info->handlers->start_transaction(smi_info->si_sm, msg, 3);
+
+ rv = wait_for_msg_done(smi_info);
+ if (rv) {
+ printk(KERN_WARNING
+ "ipmi_si: Error getting response from set global,"
+ " enables command, the event buffer is not"
+ " enabled.\n");
+ goto out;
+ }
+
+ resp_len = smi_info->handlers->get_result(smi_info->si_sm,
+ resp, IPMI_MAX_MSG_LENGTH);
+
+ if (resp_len < 3 ||
+ resp[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 ||
+ resp[1] != IPMI_SET_BMC_GLOBAL_ENABLES_CMD) {
+ printk(KERN_WARNING
+ "ipmi_si: Invalid return from get global,"
+ "enables command, not enable the event"
+ " buffer.\n");
+ rv = -EINVAL;
+ goto out;
+ }
+
+ if (resp[2] != 0)
+ /*
+ * An error when setting the event buffer bit means
+ * that the event buffer is not supported.
+ */
+ rv = -ENOENT;
+ out:
+ kfree(resp);
+ return rv;
+}
+
static int type_file_read_proc(char *page, char **start, off_t off,
int count, int *eof, void *data)
{
new_smi->intf_num = smi_num;
smi_num++;
+ rv = try_enable_event_buffer(new_smi);
+ if (rv == 0)
+ new_smi->has_event_buffer = 1;
+
/*
* Start clearing the flags before we enable interrupts or the
* timer to avoid racing with the timer.
*/
new_smi->pdev = platform_device_alloc("ipmi_si",
new_smi->intf_num);
- if (rv) {
+ if (!new_smi->pdev) {
printk(KERN_ERR
"ipmi_si_intf:"
" Unable to allocate platform device\n");
}
#endif
-void __attribute__((weak))
-map_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
- /* nothing. architectures can override. */
-}
-
-void __attribute__((weak))
-unmap_devmem(unsigned long pfn, unsigned long len, pgprot_t prot)
-{
- /* nothing. architectures can override. */
-}
-
-static void mmap_mem_open(struct vm_area_struct *vma)
-{
- map_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-}
-
-static void mmap_mem_close(struct vm_area_struct *vma)
-{
- unmap_devmem(vma->vm_pgoff, vma->vm_end - vma->vm_start,
- vma->vm_page_prot);
-}
-
static struct vm_operations_struct mmap_mem_ops = {
- .open = mmap_mem_open,
- .close = mmap_mem_close,
#ifdef CONFIG_HAVE_IOREMAP_PROT
.access = generic_access_phys
#endif
vma->vm_pgoff,
size,
vma->vm_page_prot)) {
- unmap_devmem(vma->vm_pgoff, size, vma->vm_page_prot);
return -EAGAIN;
}
return 0;
* value is not cryptographically secure but for several uses the cost of
* depleting entropy is too high
*/
+DEFINE_PER_CPU(__u32 [4], get_random_int_hash);
unsigned int get_random_int(void)
{
- /*
- * Use IP's RNG. It suits our purpose perfectly: it re-keys itself
- * every second, from the entropy pool (and thus creates a limited
- * drain on it), and uses halfMD4Transform within the second. We
- * also mix it with jiffies and the PID:
- */
- return secure_ip_id((__force __be32)(current->pid + jiffies));
+ struct keydata *keyptr;
+ __u32 *hash = get_cpu_var(get_random_int_hash);
+ int ret;
+
+ keyptr = get_keyptr();
+ hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret;
+
+ ret = half_md4_transform(hash, keyptr->secret);
+ put_cpu_var(get_random_int_hash);
+
+ return ret;
}
/*
#include <linux/vt_kern.h>
#include <linux/workqueue.h>
#include <linux/kexec.h>
-#include <linux/interrupt.h>
#include <linux/hrtimer.h>
#include <linux/oom.h>
&sysrq_showlocks_op, /* d */
&sysrq_term_op, /* e */
&sysrq_moom_op, /* f */
- /* g: May be registered by ppc for kgdb */
+ /* g: May be registered for the kernel debugger */
NULL, /* g */
NULL, /* h - reserved for help */
&sysrq_kill_op, /* i */
&sysrq_sync_op, /* s */
&sysrq_showstate_op, /* t */
&sysrq_mountro_op, /* u */
- /* v: May be registered at init time by SMP VOYAGER */
+ /* v: May be registered for frame buffer console restore */
NULL, /* v */
&sysrq_showstate_blocked_op, /* w */
/* x: May be registered on ppc/powerpc for xmon */
continue; /* nothing to display */
}
/* Glyph not found */
- if ((!(vc->vc_utf && !vc->vc_disp_ctrl) && c < 128) && !(c & ~charmask)) {
+ if ((!(vc->vc_utf && !vc->vc_disp_ctrl) || c < 128) && !(c & ~charmask)) {
/* In legacy mode use the glyph we get by a 1:1 mapping.
This would make absolutely no sense with Unicode in mind,
but do this for ASCII characters since a font may lack
case KIOCSOUND:
if (!perm)
goto eperm;
+ /* FIXME: This is an old broken API but we need to keep it
+ supported and somehow separate the historic advertised
+ tick rate from any real one */
if (arg)
arg = CLOCK_TICK_RATE / arg;
kd_mksound(arg, 0);
*/
ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
count = ticks ? (arg & 0xffff) : 0;
+ /* FIXME: This is an old broken API but we need to keep it
+ supported and somehow separate the historic advertised
+ tick rate from any real one */
if (count)
count = CLOCK_TICK_RATE / count;
kd_mksound(count, ticks);
return v2;
}
-static cycle_t acpi_pm_read(void)
+static cycle_t acpi_pm_read(struct clocksource *cs)
{
return (cycle_t)read_pmtmr();
}
}
__setup("acpi_pm_good", acpi_pm_good_setup);
-static cycle_t acpi_pm_read_slow(void)
+static cycle_t acpi_pm_read_slow(struct clocksource *cs)
{
return (cycle_t)acpi_pm_read_verified();
}
unsigned long count, delta;
mach_prepare_counter();
- value1 = clocksource_acpi_pm.read();
+ value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
mach_countup(&count);
- value2 = clocksource_acpi_pm.read();
+ value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
delta = (value2 - value1) & ACPI_PM_MASK;
/* Check that the PMTMR delta is within 5% of what we expect */
/* "verify" this timing source: */
for (j = 0; j < ACPI_PM_MONOTONICITY_CHECKS; j++) {
udelay(100 * j);
- value1 = clocksource_acpi_pm.read();
+ value1 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
for (i = 0; i < ACPI_PM_READ_CHECKS; i++) {
- value2 = clocksource_acpi_pm.read();
+ value2 = clocksource_acpi_pm.read(&clocksource_acpi_pm);
if (value2 == value1)
continue;
if (value2 > value1)
int use_cyclone = 0;
static void __iomem *cyclone_ptr;
-static cycle_t read_cyclone(void)
+static cycle_t read_cyclone(struct clocksource *cs)
{
return (cycle_t)readl(cyclone_ptr);
}
/* The base timer frequency, * 27 if selected */
#define HRT_FREQ 1000000
-static cycle_t read_hrt(void)
+static cycle_t read_hrt(struct clocksource *cs)
{
/* Read the timer value */
return (cycle_t) inl(scx200_cb_base + SCx200_TIMER_OFFSET);
static void __iomem *tcaddr;
-static cycle_t tc_get_cycles(void)
+static cycle_t tc_get_cycles(struct clocksource *cs)
{
unsigned long flags;
u32 lower, upper;
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int cpu;
+ unsigned long flags;
dma_src = dma_map_single(dev->dev, src, len, DMA_TO_DEVICE);
dma_dest = dma_map_single(dev->dev, dest, len, DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
- DMA_CTRL_ACK);
+ flags = DMA_CTRL_ACK |
+ DMA_COMPL_SRC_UNMAP_SINGLE |
+ DMA_COMPL_DEST_UNMAP_SINGLE;
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
if (!tx) {
dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int cpu;
+ unsigned long flags;
dma_src = dma_map_single(dev->dev, kdata, len, DMA_TO_DEVICE);
dma_dest = dma_map_page(dev->dev, page, offset, len, DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
- DMA_CTRL_ACK);
+ flags = DMA_CTRL_ACK | DMA_COMPL_SRC_UNMAP_SINGLE;
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
if (!tx) {
dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int cpu;
+ unsigned long flags;
dma_src = dma_map_page(dev->dev, src_pg, src_off, len, DMA_TO_DEVICE);
dma_dest = dma_map_page(dev->dev, dest_pg, dest_off, len,
DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
- DMA_CTRL_ACK);
+ flags = DMA_CTRL_ACK;
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
if (!tx) {
dma_unmap_page(dev->dev, dma_src, len, DMA_TO_DEVICE);
chan = dma_request_channel(mask, filter, NULL);
if (chan) {
err = dmatest_add_channel(chan);
- if (err == 0)
- continue;
- else {
+ if (err) {
dma_release_channel(chan);
break; /* add_channel failed, punt */
}
static void
ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc)
{
- /*
- * yes we are unmapping both _page and _single
- * alloc'd regions with unmap_page. Is this
- * *really* that bad?
- */
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP))
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, dst),
- pci_unmap_len(desc, len),
- PCI_DMA_FROMDEVICE);
-
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP))
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, src),
- pci_unmap_len(desc, len),
- PCI_DMA_TODEVICE);
+ if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ pci_unmap_single(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, dst),
+ pci_unmap_len(desc, len),
+ PCI_DMA_FROMDEVICE);
+ else
+ pci_unmap_page(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, dst),
+ pci_unmap_len(desc, len),
+ PCI_DMA_FROMDEVICE);
+ }
+
+ if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ pci_unmap_single(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, src),
+ pci_unmap_len(desc, len),
+ PCI_DMA_TODEVICE);
+ else
+ pci_unmap_page(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, src),
+ pci_unmap_len(desc, len),
+ PCI_DMA_TODEVICE);
+ }
}
/**
int err = 0;
struct completion cmp;
unsigned long tmo;
+ unsigned long flags;
src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
if (!src)
DMA_TO_DEVICE);
dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE,
DMA_FROM_DEVICE);
+ flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE;
tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
- IOAT_TEST_SIZE, 0);
+ IOAT_TEST_SIZE, flags);
if (!tx) {
dev_err(&device->pdev->dev,
"Self-test prep failed, disabling\n");
/* Other interrupts do not interfere with this channel */
spin_lock(&ichan->lock);
if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
- ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+ ((curbuf >> chan_id) & 1) == ichan->active_buffer &&
+ !list_is_last(ichan->queue.next, &ichan->queue))) {
int i = 100;
/* This doesn't help. See comment in ipu_disable_channel() */
struct idmac_channel *ichan = dev_id;
printk(KERN_DEBUG "Got SOF IRQ %d on Channel %d\n",
irq, ichan->dma_chan.chan_id);
- disable_irq(irq);
+ disable_irq_nosync(irq);
return IRQ_HANDLED;
}
struct idmac_channel *ichan = dev_id;
printk(KERN_DEBUG "Got EOF IRQ %d on Channel %d\n",
irq, ichan->dma_chan.chan_id);
- disable_irq(irq);
+ disable_irq_nosync(irq);
return IRQ_HANDLED;
}
pci_write_config_word(pdev, offset, value);
}
-/* write all or some bits in a dword-register*/
+/*
+ * pci_write_bits32
+ *
+ * edac local routine to do pci_write_config_dword, but adds
+ * a mask parameter. If mask is all ones, ignore the mask.
+ * Otherwise utilize the mask to isolate specified bits
+ *
+ * write all or some bits in a dword-register
+ */
static inline void pci_write_bits32(struct pci_dev *pdev, int offset,
u32 value, u32 mask)
{
- if (mask != 0xffff) {
+ if (mask != 0xffffffff) {
u32 buf;
pci_read_config_dword(pdev, offset, &buf);
*/
static void edac_device_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct edac_device_ctl_info *edac_dev = to_edac_device_ctl_work(d_work);
mutex_lock(&device_ctls_mutex);
*/
static void edac_mc_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct mem_ctl_info *mci = to_edac_mem_ctl_work(d_work);
mutex_lock(&mem_ctls_mutex);
*/
static void edac_pci_workq_function(struct work_struct *work_req)
{
- struct delayed_work *d_work = (struct delayed_work *)work_req;
+ struct delayed_work *d_work = to_delayed_work(work_req);
struct edac_pci_ctl_info *pci = to_edac_pci_ctl_work(d_work);
int msec;
unsigned long delay;
int row_index;
err_detect = in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT);
- if (err_detect)
+ if (!err_detect)
return;
mpc85xx_mc_printk(mci, KERN_ERR, "Err Detect Register: %#8.8x\n",
rc = 1;
break;
case ibft_eth_ip_addr:
- if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr)))
rc = 1;
break;
case ibft_eth_subnet_mask:
- if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ if (nic->subnet_mask_prefix)
rc = 1;
break;
case ibft_eth_origin:
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB
+ select FRAMEBUFFER_CONSOLE if !EMBEDDED
tristate "i915 driver"
help
Choose this option if you have a system that has Intel 830M, 845G,
int saved_x, saved_y;
struct drm_encoder *encoder;
bool ret = true;
- bool depth_changed, bpp_changed;
adjusted_mode = drm_mode_duplicate(dev, mode);
if (!crtc->enabled)
return true;
- if (old_fb && crtc->fb) {
- depth_changed = (old_fb->depth != crtc->fb->depth);
- bpp_changed = (old_fb->bits_per_pixel !=
- crtc->fb->bits_per_pixel);
- } else {
- depth_changed = true;
- bpp_changed = true;
- }
-
saved_mode = crtc->mode;
saved_x = crtc->x;
saved_y = crtc->y;
crtc->x = x;
crtc->y = y;
- if (drm_mode_equal(&saved_mode, &crtc->mode)) {
- if (saved_x != crtc->x || saved_y != crtc->y ||
- depth_changed || bpp_changed) {
- ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
- old_fb);
- goto done;
- }
- }
-
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
retcode = -EINVAL;
} else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) ||
((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) ||
- ((ioctl->flags & DRM_MASTER) && !file_priv->is_master)) {
+ ((ioctl->flags & DRM_MASTER) && !file_priv->is_master) ||
+ (!(ioctl->flags & DRM_CONTROL_ALLOW) && (file_priv->minor->type == DRM_MINOR_CONTROL))) {
retcode = -EACCES;
} else {
if (cmd & (IOC_IN | IOC_OUT)) {
int drm_setmaster_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
+ if (file_priv->is_master)
+ return 0;
+
if (file_priv->minor->master && file_priv->minor->master != file_priv->master)
return -EINVAL;
file_priv->minor->master != file_priv->master) {
mutex_lock(&dev->struct_mutex);
file_priv->minor->master = drm_master_get(file_priv->master);
+ file_priv->is_master = 1;
mutex_unlock(&dev->struct_mutex);
}
int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- if (!file_priv->master)
+ if (!file_priv->is_master)
+ return -EINVAL;
+
+ if (!file_priv->minor->master)
return -EINVAL;
+
mutex_lock(&dev->struct_mutex);
drm_master_put(&file_priv->minor->master);
+ file_priv->is_master = 0;
mutex_unlock(&dev->struct_mutex);
return 0;
}
if (dev->driver->load) {
ret = dev->driver->load(dev, ent->driver_data);
if (ret)
- goto err_g3;
+ goto err_g4;
}
/* setup the grouping for the legacy output */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group);
if (ret)
- goto err_g3;
+ goto err_g4;
}
list_add_tail(&dev->driver_item, &driver->device_list);
return 0;
-err_g3:
+err_g4:
drm_put_minor(&dev->primary);
+err_g3:
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ drm_put_minor(&dev->control);
err_g2:
pci_disable_device(pdev);
err_g1:
dev->agp = NULL;
}
- drm_ht_remove(&dev->map_hash);
- drm_ctxbitmap_cleanup(dev);
-
list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
drm_rmmap(dev, r_list->map);
+ drm_ht_remove(&dev->map_hash);
+
+ drm_ctxbitmap_cleanup(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET))
drm_put_minor(&dev->control);
*/
static void drm_sysfs_device_release(struct device *dev)
{
+ memset(dev, 0, sizeof(struct device));
return;
}
return 0;
- device_unregister(&minor->kdev);
err_out:
-
return err;
}
mutex_unlock(&dev->struct_mutex);
if (ret) {
DRM_ERROR("i915_dispatch_cmdbuffer failed\n");
- goto fail_batch_free;
+ goto fail_clip_free;
}
if (sarea_priv)
sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
-fail_batch_free:
- drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER);
fail_clip_free:
drm_free(cliprects,
cmdbuf->num_cliprects * sizeof(struct drm_clip_rect),
DRM_MEM_DRIVER);
+fail_batch_free:
+ drm_free(batch_data, cmdbuf->sz, DRM_MEM_DRIVER);
return ret;
}
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
- /* Let GEM Manage from end of prealloc space to end of aperture */
- i915_gem_do_init(dev, prealloc_size, agp_size);
+ /* Let GEM Manage from end of prealloc space to end of aperture.
+ *
+ * However, leave one page at the end still bound to the scratch page.
+ * There are a number of places where the hardware apparently
+ * prefetches past the end of the object, and we've seen multiple
+ * hangs with the GPU head pointer stuck in a batchbuffer bound
+ * at the last page of the aperture. One page should be enough to
+ * keep any prefetching inside of the aperture.
+ */
+ i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
ret = i915_gem_init_ringbuffer(dev);
if (ret)
if (dev_priv->regs != NULL)
iounmap(dev_priv->regs);
- intel_opregion_free(dev);
+ intel_opregion_free(dev, 0);
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
intel_modeset_cleanup(dev);
DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
+ DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
drm_irq_uninstall(dev);
}
- intel_opregion_free(dev);
+ intel_opregion_free(dev, 1);
if (state.event == PM_EVENT_SUSPEND) {
/* Shut down the device */
u8 saveAR[21];
u8 saveDACMASK;
u8 saveCR[37];
+ uint64_t saveFENCE[16];
struct {
struct drm_mm gtt_space;
uint32_t tiling_mode;
uint32_t stride;
+ /** Record of address bit 17 of each page at last unbind. */
+ long *bit_17;
+
/** AGP mapping type (AGP_USER_MEMORY or AGP_USER_CACHED_MEMORY */
uint32_t agp_type;
void i915_gem_detach_phys_object(struct drm_device *dev,
struct drm_gem_object *obj);
void i915_gem_free_all_phys_object(struct drm_device *dev);
+int i915_gem_object_get_pages(struct drm_gem_object *obj);
+void i915_gem_object_put_pages(struct drm_gem_object *obj);
/* i915_gem_tiling.c */
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
+void i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj);
+void i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj);
/* i915_gem_debug.c */
void i915_gem_dump_object(struct drm_gem_object *obj, int len,
#ifdef CONFIG_ACPI
/* i915_opregion.c */
extern int intel_opregion_init(struct drm_device *dev, int resume);
-extern void intel_opregion_free(struct drm_device *dev);
+extern void intel_opregion_free(struct drm_device *dev, int suspend);
extern void opregion_asle_intr(struct drm_device *dev);
extern void opregion_enable_asle(struct drm_device *dev);
#else
static inline int intel_opregion_init(struct drm_device *dev, int resume) { return 0; }
-static inline void intel_opregion_free(struct drm_device *dev) { return; }
+static inline void intel_opregion_free(struct drm_device *dev, int suspend) { return; }
static inline void opregion_asle_intr(struct drm_device *dev) { return; }
static inline void opregion_enable_asle(struct drm_device *dev) { return; }
#endif
#define I915_WRITE16(reg, val) writel(val, dev_priv->regs + (reg))
#define I915_READ8(reg) readb(dev_priv->regs + (reg))
#define I915_WRITE8(reg, val) writeb(val, dev_priv->regs + (reg))
-#ifdef writeq
#define I915_WRITE64(reg, val) writeq(val, dev_priv->regs + (reg))
-#else
-#define I915_WRITE64(reg, val) (writel(val, dev_priv->regs + (reg)), \
- writel(upper_32_bits(val), dev_priv->regs + \
- (reg) + 4))
-#endif
+#define I915_READ64(reg) readq(dev_priv->regs + (reg))
#define POSTING_READ(reg) (void)I915_READ(reg)
#define I915_VERBOSE 0
(dev)->pci_device == 0x2A42 || \
(dev)->pci_device == 0x2E02 || \
(dev)->pci_device == 0x2E12 || \
- (dev)->pci_device == 0x2E22)
+ (dev)->pci_device == 0x2E22 || \
+ (dev)->pci_device == 0x2E32)
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
+#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
+ (dev)->pci_device == 0x2A12)
#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \
(dev)->pci_device == 0x2E12 || \
(dev)->pci_device == 0x2E22 || \
+ (dev)->pci_device == 0x2E32 || \
IS_GM45(dev))
#define IS_IGDG(dev) ((dev)->pci_device == 0xa001)
uint64_t offset,
uint64_t size);
static void i915_gem_object_set_to_full_cpu_read_domain(struct drm_gem_object *obj);
-static int i915_gem_object_get_pages(struct drm_gem_object *obj);
-static void i915_gem_object_put_pages(struct drm_gem_object *obj);
static int i915_gem_object_wait_rendering(struct drm_gem_object *obj);
static int i915_gem_object_bind_to_gtt(struct drm_gem_object *obj,
unsigned alignment);
int length)
{
char __iomem *vaddr;
- int ret;
+ int unwritten;
vaddr = kmap_atomic(pages[page_base >> PAGE_SHIFT], KM_USER0);
if (vaddr == NULL)
return -ENOMEM;
- ret = __copy_to_user_inatomic(data, vaddr + page_offset, length);
+ unwritten = __copy_to_user_inatomic(data, vaddr + page_offset, length);
kunmap_atomic(vaddr, KM_USER0);
- return ret;
+ if (unwritten)
+ return -EFAULT;
+
+ return 0;
+}
+
+static int i915_gem_object_needs_bit17_swizzle(struct drm_gem_object *obj)
+{
+ drm_i915_private_t *dev_priv = obj->dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+
+ return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
+ obj_priv->tiling_mode != I915_TILING_NONE;
}
static inline int
return 0;
}
+static inline int
+slow_shmem_bit17_copy(struct page *gpu_page,
+ int gpu_offset,
+ struct page *cpu_page,
+ int cpu_offset,
+ int length,
+ int is_read)
+{
+ char *gpu_vaddr, *cpu_vaddr;
+
+ /* Use the unswizzled path if this page isn't affected. */
+ if ((page_to_phys(gpu_page) & (1 << 17)) == 0) {
+ if (is_read)
+ return slow_shmem_copy(cpu_page, cpu_offset,
+ gpu_page, gpu_offset, length);
+ else
+ return slow_shmem_copy(gpu_page, gpu_offset,
+ cpu_page, cpu_offset, length);
+ }
+
+ gpu_vaddr = kmap_atomic(gpu_page, KM_USER0);
+ if (gpu_vaddr == NULL)
+ return -ENOMEM;
+
+ cpu_vaddr = kmap_atomic(cpu_page, KM_USER1);
+ if (cpu_vaddr == NULL) {
+ kunmap_atomic(gpu_vaddr, KM_USER0);
+ return -ENOMEM;
+ }
+
+ /* Copy the data, XORing A6 with A17 (1). The user already knows he's
+ * XORing with the other bits (A9 for Y, A9 and A10 for X)
+ */
+ while (length > 0) {
+ int cacheline_end = ALIGN(gpu_offset + 1, 64);
+ int this_length = min(cacheline_end - gpu_offset, length);
+ int swizzled_gpu_offset = gpu_offset ^ 64;
+
+ if (is_read) {
+ memcpy(cpu_vaddr + cpu_offset,
+ gpu_vaddr + swizzled_gpu_offset,
+ this_length);
+ } else {
+ memcpy(gpu_vaddr + swizzled_gpu_offset,
+ cpu_vaddr + cpu_offset,
+ this_length);
+ }
+ cpu_offset += this_length;
+ gpu_offset += this_length;
+ length -= this_length;
+ }
+
+ kunmap_atomic(cpu_vaddr, KM_USER1);
+ kunmap_atomic(gpu_vaddr, KM_USER0);
+
+ return 0;
+}
+
/**
* This is the fast shmem pread path, which attempts to copy_from_user directly
* from the backing pages of the object to the user's address space. On a
int page_length;
int ret;
uint64_t data_ptr = args->data_ptr;
+ int do_bit17_swizzling;
remain = args->size;
down_read(&mm->mmap_sem);
pinned_pages = get_user_pages(current, mm, (uintptr_t)args->data_ptr,
- num_pages, 0, 0, user_pages, NULL);
+ num_pages, 1, 0, user_pages, NULL);
up_read(&mm->mmap_sem);
if (pinned_pages < num_pages) {
ret = -EFAULT;
goto fail_put_user_pages;
}
+ do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
mutex_lock(&dev->struct_mutex);
ret = i915_gem_object_get_pages(obj);
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- ret = slow_shmem_copy(user_pages[data_page_index],
- data_page_offset,
- obj_priv->pages[shmem_page_index],
- shmem_page_offset,
- page_length);
+ if (do_bit17_swizzling) {
+ ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length,
+ 1);
+ } else {
+ ret = slow_shmem_copy(user_pages[data_page_index],
+ data_page_offset,
+ obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ page_length);
+ }
if (ret)
goto fail_put_pages;
return -EINVAL;
}
- ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv);
- if (ret != 0)
+ if (i915_gem_object_needs_bit17_swizzle(obj)) {
ret = i915_gem_shmem_pread_slow(dev, obj, args, file_priv);
+ } else {
+ ret = i915_gem_shmem_pread_fast(dev, obj, args, file_priv);
+ if (ret != 0)
+ ret = i915_gem_shmem_pread_slow(dev, obj, args,
+ file_priv);
+ }
drm_gem_object_unreference(obj);
int page_length;
int ret;
uint64_t data_ptr = args->data_ptr;
+ int do_bit17_swizzling;
remain = args->size;
goto fail_put_user_pages;
}
+ do_bit17_swizzling = i915_gem_object_needs_bit17_swizzle(obj);
+
mutex_lock(&dev->struct_mutex);
ret = i915_gem_object_get_pages(obj);
if ((data_page_offset + page_length) > PAGE_SIZE)
page_length = PAGE_SIZE - data_page_offset;
- ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
- shmem_page_offset,
- user_pages[data_page_index],
- data_page_offset,
- page_length);
+ if (do_bit17_swizzling) {
+ ret = slow_shmem_bit17_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length,
+ 0);
+ } else {
+ ret = slow_shmem_copy(obj_priv->pages[shmem_page_index],
+ shmem_page_offset,
+ user_pages[data_page_index],
+ data_page_offset,
+ page_length);
+ }
if (ret)
goto fail_put_pages;
ret = i915_gem_gtt_pwrite_slow(dev, obj, args,
file_priv);
}
+ } else if (i915_gem_object_needs_bit17_swizzle(obj)) {
+ ret = i915_gem_shmem_pwrite_slow(dev, obj, args, file_priv);
} else {
ret = i915_gem_shmem_pwrite_fast(dev, obj, args, file_priv);
if (ret == -EFAULT) {
return 0;
}
-static void
+void
i915_gem_object_put_pages(struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
if (--obj_priv->pages_refcount != 0)
return;
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ i915_gem_object_save_bit_17_swizzle(obj);
+
for (i = 0; i < page_count; i++)
if (obj_priv->pages[i] != NULL) {
if (obj_priv->dirty)
if (obj->write_domain != 0)
i915_gem_object_move_to_flushing(obj);
- else
+ else {
+ /* Take a reference on the object so it won't be
+ * freed while the spinlock is held. The list
+ * protection for this spinlock is safe when breaking
+ * the lock like this since the next thing we do
+ * is just get the head of the list again.
+ */
+ drm_gem_object_reference(obj);
i915_gem_object_move_to_inactive(obj);
+ spin_unlock(&dev_priv->mm.active_list_lock);
+ drm_gem_object_unreference(obj);
+ spin_lock(&dev_priv->mm.active_list_lock);
+ }
}
out:
spin_unlock(&dev_priv->mm.active_list_lock);
i915_wait_request(struct drm_device *dev, uint32_t seqno)
{
drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 ier;
int ret = 0;
BUG_ON(seqno == 0);
if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
+ ier = I915_READ(IER);
+ if (!ier) {
+ DRM_ERROR("something (likely vbetool) disabled "
+ "interrupts, re-enabling\n");
+ i915_driver_irq_preinstall(dev);
+ i915_driver_irq_postinstall(dev);
+ }
+
dev_priv->mm.waiting_gem_seqno = seqno;
i915_user_irq_get(dev);
ret = wait_event_interruptible(dev_priv->irq_queue,
return ret;
}
-static int
+int
i915_gem_object_get_pages(struct drm_gem_object *obj)
{
struct drm_i915_gem_object *obj_priv = obj->driver_private;
}
obj_priv->pages[i] = page;
}
+
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ i915_gem_object_do_bit_17_swizzle(obj);
+
return 0;
}
drm_free(*relocs, reloc_count * sizeof(**relocs),
DRM_MEM_DRIVER);
*relocs = NULL;
- return ret;
+ return -EFAULT;
}
reloc_index += exec_list[i].relocation_count;
}
- return ret;
+ return 0;
}
static int
struct drm_i915_gem_relocation_entry *relocs)
{
uint32_t reloc_count = 0, i;
- int ret;
+ int ret = 0;
for (i = 0; i < buffer_count; i++) {
struct drm_i915_gem_relocation_entry __user *user_relocs;
+ int unwritten;
user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr;
- if (ret == 0) {
- ret = copy_to_user(user_relocs,
- &relocs[reloc_count],
- exec_list[i].relocation_count *
- sizeof(*relocs));
+ unwritten = copy_to_user(user_relocs,
+ &relocs[reloc_count],
+ exec_list[i].relocation_count *
+ sizeof(*relocs));
+
+ if (unwritten) {
+ ret = -EFAULT;
+ goto err;
}
reloc_count += exec_list[i].relocation_count;
}
+err:
drm_free(relocs, reloc_count * sizeof(*relocs), DRM_MEM_DRIVER);
return ret;
exec_offset = exec_list[args->buffer_count - 1].offset;
#if WATCH_EXEC
- i915_gem_dump_object(object_list[args->buffer_count - 1],
+ i915_gem_dump_object(batch_obj,
args->batch_len,
__func__,
~0);
(uintptr_t) args->buffers_ptr,
exec_list,
sizeof(*exec_list) * args->buffer_count);
- if (ret)
+ if (ret) {
+ ret = -EFAULT;
DRM_ERROR("failed to copy %d exec entries "
"back to user (%d)\n",
args->buffer_count, ret);
+ }
}
/* Copy the updated relocations out regardless of current error
i915_gem_free_mmap_offset(obj);
drm_free(obj_priv->page_cpu_valid, 1, DRM_MEM_DRIVER);
+ kfree(obj_priv->bit_17);
drm_free(obj->driver_private, 1, DRM_MEM_DRIVER);
}
dev_priv->mm.suspended = 0;
ret = i915_gem_init_ringbuffer(dev);
- if (ret != 0)
+ if (ret != 0) {
+ mutex_unlock(&dev->struct_mutex);
return ret;
+ }
spin_lock(&dev_priv->mm.active_list_lock);
BUG_ON(!list_empty(&dev_priv->mm.active_list));
return 0;
}
+static void i915_dump_pages(struct seq_file *m, struct page **pages, int page_count)
+{
+ int page, i;
+ uint32_t *mem;
+
+ for (page = 0; page < page_count; page++) {
+ mem = kmap(pages[page]);
+ for (i = 0; i < PAGE_SIZE; i += 4)
+ seq_printf(m, "%08x : %08x\n", i, mem[i / 4]);
+ kunmap(pages[page]);
+ }
+}
+
+static int i915_batchbuffer_info(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_gem_object *obj;
+ struct drm_i915_gem_object *obj_priv;
+ int ret;
+
+ spin_lock(&dev_priv->mm.active_list_lock);
+
+ list_for_each_entry(obj_priv, &dev_priv->mm.active_list, list) {
+ obj = obj_priv->obj;
+ if (obj->read_domains & I915_GEM_DOMAIN_COMMAND) {
+ ret = i915_gem_object_get_pages(obj);
+ if (ret) {
+ DRM_ERROR("Failed to get pages: %d\n", ret);
+ spin_unlock(&dev_priv->mm.active_list_lock);
+ return ret;
+ }
+
+ seq_printf(m, "--- gtt_offset = 0x%08x\n", obj_priv->gtt_offset);
+ i915_dump_pages(m, obj_priv->pages, obj->size / PAGE_SIZE);
+
+ i915_gem_object_put_pages(obj);
+ }
+ }
+
+ spin_unlock(&dev_priv->mm.active_list_lock);
+
+ return 0;
+}
+
+static int i915_ringbuffer_data(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ u8 *virt;
+ uint32_t *ptr, off;
+
+ if (!dev_priv->ring.ring_obj) {
+ seq_printf(m, "No ringbuffer setup\n");
+ return 0;
+ }
+
+ virt = dev_priv->ring.virtual_start;
+
+ for (off = 0; off < dev_priv->ring.Size; off += 4) {
+ ptr = (uint32_t *)(virt + off);
+ seq_printf(m, "%08x : %08x\n", off, *ptr);
+ }
+
+ return 0;
+}
+
+static int i915_ringbuffer_info(struct seq_file *m, void *data)
+{
+ struct drm_info_node *node = (struct drm_info_node *) m->private;
+ struct drm_device *dev = node->minor->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ unsigned int head, tail, mask;
+
+ head = I915_READ(PRB0_HEAD) & HEAD_ADDR;
+ tail = I915_READ(PRB0_TAIL) & TAIL_ADDR;
+ mask = dev_priv->ring.tail_mask;
+
+ seq_printf(m, "RingHead : %08x\n", head);
+ seq_printf(m, "RingTail : %08x\n", tail);
+ seq_printf(m, "RingMask : %08x\n", mask);
+ seq_printf(m, "RingSize : %08lx\n", dev_priv->ring.Size);
+ seq_printf(m, "Acthd : %08x\n", I915_READ(IS_I965G(dev) ? ACTHD_I965 : ACTHD));
+
+ return 0;
+}
+
+
static struct drm_info_list i915_gem_debugfs_list[] = {
{"i915_gem_active", i915_gem_object_list_info, 0, (void *) ACTIVE_LIST},
{"i915_gem_flushing", i915_gem_object_list_info, 0, (void *) FLUSHING_LIST},
{"i915_gem_fence_regs", i915_gem_fence_regs_info, 0},
{"i915_gem_interrupt", i915_interrupt_info, 0},
{"i915_gem_hws", i915_hws_info, 0},
+ {"i915_ringbuffer_data", i915_ringbuffer_data, 0},
+ {"i915_ringbuffer_info", i915_ringbuffer_info, 0},
+ {"i915_batchbuffers", i915_batchbuffer_info, 0},
};
#define I915_GEM_DEBUGFS_ENTRIES ARRAY_SIZE(i915_gem_debugfs_list)
*
*/
+#include "linux/string.h"
+#include "linux/bitops.h"
#include "drmP.h"
#include "drm.h"
#include "i915_drm.h"
swizzle_y = I915_BIT_6_SWIZZLE_9_11;
} else {
/* Bit 17 swizzling by the CPU in addition. */
- swizzle_x = I915_BIT_6_SWIZZLE_UNKNOWN;
- swizzle_y = I915_BIT_6_SWIZZLE_UNKNOWN;
+ swizzle_x = I915_BIT_6_SWIZZLE_9_10_17;
+ swizzle_y = I915_BIT_6_SWIZZLE_9_17;
}
break;
}
mutex_lock(&dev->struct_mutex);
if (args->tiling_mode == I915_TILING_NONE) {
- obj_priv->tiling_mode = I915_TILING_NONE;
args->swizzle_mode = I915_BIT_6_SWIZZLE_NONE;
} else {
if (args->tiling_mode == I915_TILING_X)
args->swizzle_mode = dev_priv->mm.bit_6_swizzle_x;
else
args->swizzle_mode = dev_priv->mm.bit_6_swizzle_y;
+
+ /* Hide bit 17 swizzling from the user. This prevents old Mesa
+ * from aborting the application on sw fallbacks to bit 17,
+ * and we use the pread/pwrite bit17 paths to swizzle for it.
+ * If there was a user that was relying on the swizzle
+ * information for drm_intel_bo_map()ed reads/writes this would
+ * break it, but we don't have any of those.
+ */
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
/* If we can't handle the swizzling, make it untiled. */
if (args->swizzle_mode == I915_BIT_6_SWIZZLE_UNKNOWN) {
args->tiling_mode = I915_TILING_NONE;
DRM_ERROR("unknown tiling mode\n");
}
+ /* Hide bit 17 from the user -- see comment in i915_gem_set_tiling */
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9;
+ if (args->swizzle_mode == I915_BIT_6_SWIZZLE_9_10_17)
+ args->swizzle_mode = I915_BIT_6_SWIZZLE_9_10;
+
drm_gem_object_unreference(obj);
mutex_unlock(&dev->struct_mutex);
return 0;
}
+
+/**
+ * Swap every 64 bytes of this page around, to account for it having a new
+ * bit 17 of its physical address and therefore being interpreted differently
+ * by the GPU.
+ */
+static int
+i915_gem_swizzle_page(struct page *page)
+{
+ char *vaddr;
+ int i;
+ char temp[64];
+
+ vaddr = kmap(page);
+ if (vaddr == NULL)
+ return -ENOMEM;
+
+ for (i = 0; i < PAGE_SIZE; i += 128) {
+ memcpy(temp, &vaddr[i], 64);
+ memcpy(&vaddr[i], &vaddr[i + 64], 64);
+ memcpy(&vaddr[i + 64], temp, 64);
+ }
+
+ kunmap(page);
+
+ return 0;
+}
+
+void
+i915_gem_object_do_bit_17_swizzle(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int page_count = obj->size >> PAGE_SHIFT;
+ int i;
+
+ if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
+ return;
+
+ if (obj_priv->bit_17 == NULL)
+ return;
+
+ for (i = 0; i < page_count; i++) {
+ char new_bit_17 = page_to_phys(obj_priv->pages[i]) >> 17;
+ if ((new_bit_17 & 0x1) !=
+ (test_bit(i, obj_priv->bit_17) != 0)) {
+ int ret = i915_gem_swizzle_page(obj_priv->pages[i]);
+ if (ret != 0) {
+ DRM_ERROR("Failed to swizzle page\n");
+ return;
+ }
+ set_page_dirty(obj_priv->pages[i]);
+ }
+ }
+}
+
+void
+i915_gem_object_save_bit_17_swizzle(struct drm_gem_object *obj)
+{
+ struct drm_device *dev = obj->dev;
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_gem_object *obj_priv = obj->driver_private;
+ int page_count = obj->size >> PAGE_SHIFT;
+ int i;
+
+ if (dev_priv->mm.bit_6_swizzle_x != I915_BIT_6_SWIZZLE_9_10_17)
+ return;
+
+ if (obj_priv->bit_17 == NULL) {
+ obj_priv->bit_17 = kmalloc(BITS_TO_LONGS(page_count) *
+ sizeof(long), GFP_KERNEL);
+ if (obj_priv->bit_17 == NULL) {
+ DRM_ERROR("Failed to allocate memory for bit 17 "
+ "record\n");
+ return;
+ }
+ }
+
+ for (i = 0; i < page_count; i++) {
+ if (page_to_phys(obj_priv->pages[i]) & (1 << 17))
+ __set_bit(i, obj_priv->bit_17);
+ else
+ __clear_bit(i, obj_priv->bit_17);
+ }
+}
drm_i915_irq_emit_t *emit = data;
int result;
- if (!dev_priv) {
+ if (!dev_priv || !dev_priv->ring.virtual_start) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
if (mboxes & MBOX_ACPI) {
DRM_DEBUG("Public ACPI methods supported\n");
opregion->acpi = base + OPREGION_ACPI_OFFSET;
- if (drm_core_check_feature(dev, DRIVER_MODESET)) {
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
intel_didl_outputs(dev);
- if (!resume)
- acpi_video_register();
- }
} else {
DRM_DEBUG("Public ACPI methods not supported\n");
err = -ENOTSUPP;
if (mboxes & MBOX_ASLE) {
DRM_DEBUG("ASLE supported\n");
opregion->asle = base + OPREGION_ASLE_OFFSET;
+ opregion_enable_asle(dev);
}
+ if (!resume)
+ acpi_video_register();
+
+
/* Notify BIOS we are ready to handle ACPI video ext notifs.
* Right now, all the events are handled by the ACPI video module.
* We don't actually need to do anything with them. */
return err;
}
-void intel_opregion_free(struct drm_device *dev)
+void intel_opregion_free(struct drm_device *dev, int suspend)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_opregion *opregion = &dev_priv->opregion;
if (!opregion->enabled)
return;
+ if (!suspend)
+ acpi_video_exit();
+
opregion->acpi->drdy = 0;
system_opregion = NULL;
#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
#define D_STATE 0x6104
#define CG_2D_DIS 0x6200
+#define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24)
#define CG_3D_DIS 0x6204
/*
#define DISPPLANE_NO_LINE_DOUBLE 0
#define DISPPLANE_STEREO_POLARITY_FIRST 0
#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18)
+#define DISPPLANE_TILED (1<<10)
#define DSPAADDR 0x70184
#define DSPASTRIDE 0x70188
#define DSPAPOS 0x7018C /* reserved */
for (i = 0; i < 3; i++)
dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+ } else {
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+ }
i915_save_vga(dev);
return 0;
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+ } else {
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+ }
+
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
- if (IS_GM45(dev))
+ if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
.p1 = { .min = I9XX_P1_MIN, .max = I9XX_P1_MAX },
.p2 = { .dot_limit = I9XX_P2_SDVO_DAC_SLOW_LIMIT,
.p2_slow = I9XX_P2_SDVO_DAC_SLOW, .p2_fast = I9XX_P2_SDVO_DAC_FAST },
+ .find_pll = intel_find_best_PLL,
},
{ /* INTEL_LIMIT_IGD_LVDS */
.dot = { .min = I9XX_DOT_MIN, .max = I9XX_DOT_MAX },
/* IGD only supports single-channel mode. */
.p2 = { .dot_limit = I9XX_P2_LVDS_SLOW_LIMIT,
.p2_slow = I9XX_P2_LVDS_SLOW, .p2_fast = I9XX_P2_LVDS_SLOW },
+ .find_pll = intel_find_best_PLL,
},
};
int dspbase = (pipe == 0 ? DSPAADDR : DSPBADDR);
int dspsurf = (pipe == 0 ? DSPASURF : DSPBSURF);
int dspstride = (pipe == 0) ? DSPASTRIDE : DSPBSTRIDE;
+ int dsptileoff = (pipe == 0 ? DSPATILEOFF : DSPBTILEOFF);
int dspcntr_reg = (pipe == 0) ? DSPACNTR : DSPBCNTR;
u32 dspcntr, alignment;
int ret;
mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
+ if (IS_I965G(dev)) {
+ if (obj_priv->tiling_mode != I915_TILING_NONE)
+ dspcntr |= DISPPLANE_TILED;
+ else
+ dspcntr &= ~DISPPLANE_TILED;
+ }
+
I915_WRITE(dspcntr_reg, dspcntr);
Start = obj_priv->gtt_offset;
I915_READ(dspbase);
I915_WRITE(dspsurf, Start);
I915_READ(dspsurf);
+ I915_WRITE(dsptileoff, (y << 16) | x);
} else {
I915_WRITE(dspbase, Start + Offset);
I915_READ(dspbase);
}
}
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
+ struct drm_crtc *crtc = NULL;
+ int pipe = -1;
+
+ if (!dev_priv) {
+ DRM_ERROR("called with no initialization\n");
+ return -EINVAL;
+ }
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ if (crtc->base.id == pipe_from_crtc_id->crtc_id) {
+ pipe = intel_crtc->pipe;
+ break;
+ }
+ }
+
+ if (pipe == -1) {
+ DRM_ERROR("no such CRTC id\n");
+ return -EINVAL;
+ }
+
+ pipe_from_crtc_id->pipe = pipe;
+
+ return 0;
+}
+
struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
{
struct drm_crtc *crtc = NULL;
void intel_i2c_destroy(struct intel_i2c_chan *chan);
int intel_ddc_get_modes(struct intel_output *intel_output);
extern bool intel_ddc_probe(struct intel_output *intel_output);
-
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
extern void intel_crt_init(struct drm_device *dev);
extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc);
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
extern void intel_wait_for_vblank(struct drm_device *dev);
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
static struct sysrq_key_op sysrq_intelfb_restore_op = {
.handler = intelfb_sysrq,
- .help_msg = "force fb",
- .action_msg = "force restore of fb console",
+ .help_msg = "force-fb(V)",
+ .action_msg = "Restore framebuffer console",
};
int intelfb_probe(struct drm_device *dev)
ret = intelfb_single_fb_probe(dev);
}
- register_sysrq_key('g', &sysrq_intelfb_restore_op);
+ register_sysrq_key('v', &sysrq_intelfb_restore_op);
return ret;
}
struct intel_hdmi_priv {
u32 sdvox_reg;
u32 save_SDVOX;
- int has_hdmi_sink;
+ bool has_hdmi_sink;
};
static void intel_hdmi_mode_set(struct drm_encoder *encoder,
return true;
}
+static void
+intel_hdmi_sink_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_hdmi_priv *hdmi_priv = intel_output->dev_priv;
+ struct edid *edid = NULL;
+
+ edid = drm_get_edid(&intel_output->base,
+ &intel_output->ddc_bus->adapter);
+ if (edid != NULL) {
+ hdmi_priv->has_hdmi_sink = drm_detect_hdmi_monitor(edid);
+ kfree(edid);
+ intel_output->base.display_info.raw_edid = NULL;
+ }
+}
+
static enum drm_connector_status
intel_hdmi_detect(struct drm_connector *connector)
{
temp = I915_READ(PORT_HOTPLUG_EN);
- I915_WRITE(PORT_HOTPLUG_EN,
- temp |
- HDMIB_HOTPLUG_INT_EN |
- HDMIC_HOTPLUG_INT_EN |
- HDMID_HOTPLUG_INT_EN);
+ switch (hdmi_priv->sdvox_reg) {
+ case SDVOB:
+ temp |= HDMIB_HOTPLUG_INT_EN;
+ break;
+ case SDVOC:
+ temp |= HDMIC_HOTPLUG_INT_EN;
+ break;
+ default:
+ return connector_status_unknown;
+ }
+
+ I915_WRITE(PORT_HOTPLUG_EN, temp);
POSTING_READ(PORT_HOTPLUG_EN);
return connector_status_unknown;
}
- if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0)
+ if ((I915_READ(PORT_HOTPLUG_STAT) & bit) != 0) {
+ intel_hdmi_sink_detect(connector);
return connector_status_connected;
- else
+ } else
return connector_status_disconnected;
}
#include "i915_drm.h"
#include "i915_drv.h"
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* When using bit bashing for I2C, this bit needs to be set to 1 */
+ if (!IS_IGD(dev))
+ return;
+ if (enable)
+ I915_WRITE(CG_2D_DIS,
+ I915_READ(CG_2D_DIS) | DPCUNIT_CLOCK_GATE_DISABLE);
+ else
+ I915_WRITE(CG_2D_DIS,
+ I915_READ(CG_2D_DIS) & (~DPCUNIT_CLOCK_GATE_DISABLE));
+}
+
/*
* Intel GPIO access functions
*/
goto out_free;
/* JJJ: raise SCL and SDA? */
+ intel_i2c_quirk_set(dev, true);
set_data(chan, 1);
set_clock(chan, 1);
+ intel_i2c_quirk_set(dev, false);
udelay(20);
return chan;
.destroy = intel_lvds_enc_destroy,
};
+static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+{
+ DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident);
+ return 1;
+}
+/* These systems claim to have LVDS, but really don't */
+static const struct dmi_system_id __initdata intel_no_lvds[] = {
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Apple Mac Mini (Core series)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Apple Mac Mini (Core 2 series)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "MSI IM-945GSE-A",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Dell Studio Hybrid",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
+ },
+ },
+
+ /* FIXME: add a check for the Aopen Mini PC */
+
+ { } /* terminating entry */
+};
/**
* intel_lvds_init - setup LVDS connectors on this device
u32 lvds;
int pipe;
- /* Blacklist machines that we know falsely report LVDS. */
- /* FIXME: add a check for the Aopen Mini PC */
-
- /* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */
- if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") ||
- dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) {
- DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n");
+ /* Skip init on machines we know falsely report LVDS */
+ if (dmi_check_system(intel_no_lvds))
return;
- }
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output) {
#include <linux/fb.h>
#include "drmP.h"
#include "intel_drv.h"
+#include "i915_drv.h"
/**
* intel_ddc_probe
}
};
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+
if (ret == 2)
return true;
struct edid *edid;
int ret = 0;
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
edid = drm_get_edid(&intel_output->base,
&intel_output->ddc_bus->adapter);
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
if (edid) {
drm_mode_connector_update_edid_property(&intel_output->base,
edid);
intel_sdvo_read_response(intel_output, &response, 2);
}
+static void
+intel_sdvo_hdmi_sink_detect(struct drm_connector *connector)
+{
+ struct intel_output *intel_output = to_intel_output(connector);
+ struct intel_sdvo_priv *sdvo_priv = intel_output->dev_priv;
+ struct edid *edid = NULL;
+
+ intel_sdvo_set_control_bus_switch(intel_output, sdvo_priv->ddc_bus);
+ edid = drm_get_edid(&intel_output->base,
+ &intel_output->ddc_bus->adapter);
+ if (edid != NULL) {
+ sdvo_priv->is_hdmi = drm_detect_hdmi_monitor(edid);
+ kfree(edid);
+ intel_output->base.display_info.raw_edid = NULL;
+ }
+}
+
static enum drm_connector_status intel_sdvo_detect(struct drm_connector *connector)
{
u8 response[2];
if (status != SDVO_CMD_STATUS_SUCCESS)
return connector_status_unknown;
- if ((response[0] != 0) || (response[1] != 0))
+ if ((response[0] != 0) || (response[1] != 0)) {
+ intel_sdvo_hdmi_sink_detect(connector);
return connector_status_connected;
- else
+ } else
return connector_status_disconnected;
}
#if __OS_HAS_AGP
if (!dev_priv->is_pci) {
- drm_core_ioremap(dev_priv->cce_ring, dev);
- drm_core_ioremap(dev_priv->ring_rptr, dev);
- drm_core_ioremap(dev->agp_buffer_map, dev);
+ drm_core_ioremap_wc(dev_priv->cce_ring, dev);
+ drm_core_ioremap_wc(dev_priv->ring_rptr, dev);
+ drm_core_ioremap_wc(dev->agp_buffer_map, dev);
if (!dev_priv->cce_ring->handle ||
!dev_priv->ring_rptr->handle ||
!dev->agp_buffer_map->handle) {
* 1.27- Add support for IGP GART
* 1.28- Add support for VBL on CRTC2
* 1.29- R500 3D cmd buffer support
+ * 1.30- Add support for occlusion queries
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 29
+#define DRIVER_MINOR 30
#define DRIVER_PATCHLEVEL 0
/*
{
int count = 10000000;
- while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && count--);
+ while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count)
+ ;
- while (count-- && (VIA_READ(VIA_REG_STATUS) &
+ while (count && (VIA_READ(VIA_REG_STATUS) &
(VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY |
- VIA_3D_ENG_BUSY))) ;
+ VIA_3D_ENG_BUSY)))
+ --count;
return count;
}
switch (d_siz->func) {
case VIA_CMDBUF_SPACE:
while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size)
- && count--) {
+ && --count) {
if (!d_siz->wait) {
break;
}
break;
case VIA_CMDBUF_LAG:
while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size)
- && count--) {
+ && --count) {
if (!d_siz->wait) {
break;
}
if (fnmode) {
int do_translate;
- trans = apple_find_translation((hid->product < 0x220 ||
+ trans = apple_find_translation((hid->product < 0x21d ||
hid->product >= 0x300) ?
powerbook_fn_keys : apple_fn_keys,
usage->code);
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
struct hid_input *hidinput;
int i;
+ if (!(hid->claimed & HID_CLAIMED_INPUT))
+ return 0;
+
list_for_each_entry(hidinput, &hid->inputs, list) {
for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++)
if (hidinput->input->key[i])
#define USB_VENDOR_ID_BERKSHIRE 0x0c98
#define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140
+#define USB_VENDOR_ID_CH 0x068e
+#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
+#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4
+#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff
+
#define USB_VENDOR_ID_CHERRY 0x046a
#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
#define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286
#define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294
#define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295
+#define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299
#define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a
#define USB_DEVICE_ID_S510_RECEIVER 0xc50c
#define USB_DEVICE_ID_S510_RECEIVER_2 0xc517
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2),
.driver_data = LG_FF },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL),
+ .driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
.driver_data = LG_FF2 },
{ }
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
int len;
- if (!hid->name)
- return 0;
+ if (!hid->name) {
+ ret = 0;
+ break;
+ }
len = strlen(hid->name) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
int len;
- if (!hid->phys)
- return 0;
+ if (!hid->phys) {
+ ret = 0;
+ break;
+ }
len = strlen(hid->phys) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
spin_lock_irq(&usbhid->lock);
if (!--hid->open) {
spin_unlock_irq(&usbhid->lock);
+ hid_cancel_delayed_stuff(usbhid);
usb_kill_urb(usbhid->urbin);
- flush_scheduled_work();
usbhid->intf->needs_remote_wakeup = 0;
} else {
spin_unlock_irq(&usbhid->lock);
goto err;
}
- hid->quirks = quirks;
+ hid->quirks |= quirks;
return 0;
err:
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
These devices are hard to detect and rarely found on mainstream
hardware. If unsure, say N.
+config SENSORS_SHT15
+ tristate "Sensiron humidity and temperature sensors. SHT15 and compat."
+ depends on GENERIC_GPIO
+ help
+ If you say yes here you get support for the Sensiron SHT10, SHT11,
+ SHT15, SHT71, SHT75 humidity and temperature sensors.
+
+ This driver can also be built as a module. If so, the module
+ will be called sht15.
+
config SENSORS_SIS5595
tristate "Silicon Integrated Systems Corp. SiS5595"
depends on PCI
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
+obj-$(CONFIG_SENSORS_SHT15) += sht15.o
obj-$(CONFIG_SENSORS_SIS5595) += sis5595.o
obj-$(CONFIG_SENSORS_SMSC47B397)+= smsc47b397.o
obj-$(CONFIG_SENSORS_SMSC47M1) += smsc47m1.o
return 0;
}
+#ifdef DEBUG
static char const *atk_sensor_type(union acpi_object *flags)
{
u64 type = flags->integer.value & ATK_TYPE_MASK;
return what;
}
+#endif
static void atk_print_sensor(struct atk_data *data, union acpi_object *obj)
{
#include <linux/wait.h>
#include <linux/poll.h>
#include <linux/freezer.h>
-#include <linux/version.h>
#include <linux/uaccess.h>
#include <linux/leds.h>
#include <acpi/acpi_drivers.h>
--- /dev/null
+/*
+ * sht15.c - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Currently ignoring checksum on readings.
+ * Default resolution only (14bit temp, 12bit humidity)
+ * Ignoring battery status.
+ * Heater not enabled.
+ * Timings are all conservative.
+ *
+ * Data sheet available (1/2009) at
+ * http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf
+ *
+ * Regulator supply name = vcc
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include <linux/sht15.h>
+#include <linux/regulator/consumer.h>
+#include <asm/atomic.h>
+
+#define SHT15_MEASURE_TEMP 3
+#define SHT15_MEASURE_RH 5
+
+#define SHT15_READING_NOTHING 0
+#define SHT15_READING_TEMP 1
+#define SHT15_READING_HUMID 2
+
+/* Min timings in nsecs */
+#define SHT15_TSCKL 100 /* clock low */
+#define SHT15_TSCKH 100 /* clock high */
+#define SHT15_TSU 150 /* data setup time */
+
+/**
+ * struct sht15_temppair - elements of voltage dependant temp calc
+ * @vdd: supply voltage in microvolts
+ * @d1: see data sheet
+ */
+struct sht15_temppair {
+ int vdd; /* microvolts */
+ int d1;
+};
+
+/* Table 9 from data sheet - relates temperature calculation
+ * to supply voltage.
+ */
+static const struct sht15_temppair temppoints[] = {
+ { 2500000, -39400 },
+ { 3000000, -39600 },
+ { 3500000, -39700 },
+ { 4000000, -39800 },
+ { 5000000, -40100 },
+};
+
+/**
+ * struct sht15_data - device instance specific data
+ * @pdata: platform data (gpio's etc)
+ * @read_work: bh of interrupt handler
+ * @wait_queue: wait queue for getting values from device
+ * @val_temp: last temperature value read from device
+ * @val_humid: last humidity value read from device
+ * @flag: status flag used to identify what the last request was
+ * @valid: are the current stored values valid (start condition)
+ * @last_updat: time of last update
+ * @read_lock: mutex to ensure only one read in progress
+ * at a time.
+ * @dev: associate device structure
+ * @hwmon_dev: device associated with hwmon subsystem
+ * @reg: associated regulator (if specified)
+ * @nb: notifier block to handle notifications of voltage changes
+ * @supply_uV: local copy of supply voltage used to allow
+ * use of regulator consumer if available
+ * @supply_uV_valid: indicates that an updated value has not yet
+ * been obtained from the regulator and so any calculations
+ * based upon it will be invalid.
+ * @update_supply_work: work struct that is used to update the supply_uV
+ * @interrupt_handled: flag used to indicate a hander has been scheduled
+ */
+struct sht15_data {
+ struct sht15_platform_data *pdata;
+ struct work_struct read_work;
+ wait_queue_head_t wait_queue;
+ uint16_t val_temp;
+ uint16_t val_humid;
+ u8 flag;
+ u8 valid;
+ unsigned long last_updat;
+ struct mutex read_lock;
+ struct device *dev;
+ struct device *hwmon_dev;
+ struct regulator *reg;
+ struct notifier_block nb;
+ int supply_uV;
+ int supply_uV_valid;
+ struct work_struct update_supply_work;
+ atomic_t interrupt_handled;
+};
+
+/**
+ * sht15_connection_reset() - reset the comms interface
+ * @data: sht15 specific data
+ *
+ * This implements section 3.4 of the data sheet
+ */
+static void sht15_connection_reset(struct sht15_data *data)
+{
+ int i;
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ for (i = 0; i < 9; ++i) {
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ }
+}
+/**
+ * sht15_send_bit() - send an individual bit to the device
+ * @data: device state data
+ * @val: value of bit to be sent
+ **/
+static inline void sht15_send_bit(struct sht15_data *data, int val)
+{
+
+ gpio_set_value(data->pdata->gpio_data, val);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL); /* clock low time */
+}
+
+/**
+ * sht15_transmission_start() - specific sequence for new transmission
+ *
+ * @data: device state data
+ * Timings for this are not documented on the data sheet, so very
+ * conservative ones used in implementation. This implements
+ * figure 12 on the data sheet.
+ **/
+static void sht15_transmission_start(struct sht15_data *data)
+{
+ /* ensure data is high and output */
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_data, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+}
+/**
+ * sht15_send_byte() - send a single byte to the device
+ * @data: device state
+ * @byte: value to be sent
+ **/
+static void sht15_send_byte(struct sht15_data *data, u8 byte)
+{
+ int i;
+ for (i = 0; i < 8; i++) {
+ sht15_send_bit(data, !!(byte & 0x80));
+ byte <<= 1;
+ }
+}
+/**
+ * sht15_wait_for_response() - checks for ack from device
+ * @data: device state
+ **/
+static int sht15_wait_for_response(struct sht15_data *data)
+{
+ gpio_direction_input(data->pdata->gpio_data);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ if (gpio_get_value(data->pdata->gpio_data)) {
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ dev_err(data->dev, "Command not acknowledged\n");
+ sht15_connection_reset(data);
+ return -EIO;
+ }
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ return 0;
+}
+
+/**
+ * sht15_send_cmd() - Sends a command to the device.
+ * @data: device state
+ * @cmd: command byte to be sent
+ *
+ * On entry, sck is output low, data is output pull high
+ * and the interrupt disabled.
+ **/
+static int sht15_send_cmd(struct sht15_data *data, u8 cmd)
+{
+ int ret = 0;
+ sht15_transmission_start(data);
+ sht15_send_byte(data, cmd);
+ ret = sht15_wait_for_response(data);
+ return ret;
+}
+/**
+ * sht15_update_single_val() - get a new value from device
+ * @data: device instance specific data
+ * @command: command sent to request value
+ * @timeout_msecs: timeout after which comms are assumed
+ * to have failed are reset.
+ **/
+static inline int sht15_update_single_val(struct sht15_data *data,
+ int command,
+ int timeout_msecs)
+{
+ int ret;
+ ret = sht15_send_cmd(data, command);
+ if (ret)
+ return ret;
+
+ gpio_direction_input(data->pdata->gpio_data);
+ atomic_set(&data->interrupt_handled, 0);
+
+ enable_irq(gpio_to_irq(data->pdata->gpio_data));
+ if (gpio_get_value(data->pdata->gpio_data) == 0) {
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+ /* Only relevant if the interrupt hasn't occured. */
+ if (!atomic_read(&data->interrupt_handled))
+ schedule_work(&data->read_work);
+ }
+ ret = wait_event_timeout(data->wait_queue,
+ (data->flag == SHT15_READING_NOTHING),
+ msecs_to_jiffies(timeout_msecs));
+ if (ret == 0) {/* timeout occurred */
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));;
+ sht15_connection_reset(data);
+ return -ETIME;
+ }
+ return 0;
+}
+
+/**
+ * sht15_update_vals() - get updated readings from device if too old
+ * @data: device state
+ **/
+static int sht15_update_vals(struct sht15_data *data)
+{
+ int ret = 0;
+ int timeout = HZ;
+
+ mutex_lock(&data->read_lock);
+ if (time_after(jiffies, data->last_updat + timeout)
+ || !data->valid) {
+ data->flag = SHT15_READING_HUMID;
+ ret = sht15_update_single_val(data, SHT15_MEASURE_RH, 160);
+ if (ret)
+ goto error_ret;
+ data->flag = SHT15_READING_TEMP;
+ ret = sht15_update_single_val(data, SHT15_MEASURE_TEMP, 400);
+ if (ret)
+ goto error_ret;
+ data->valid = 1;
+ data->last_updat = jiffies;
+ }
+error_ret:
+ mutex_unlock(&data->read_lock);
+
+ return ret;
+}
+
+/**
+ * sht15_calc_temp() - convert the raw reading to a temperature
+ * @data: device state
+ *
+ * As per section 4.3 of the data sheet.
+ **/
+static inline int sht15_calc_temp(struct sht15_data *data)
+{
+ int d1 = 0;
+ int i;
+
+ for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++)
+ /* Find pointer to interpolate */
+ if (data->supply_uV > temppoints[i - 1].vdd) {
+ d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd)
+ * (temppoints[i].d1 - temppoints[i - 1].d1)
+ / (temppoints[i].vdd - temppoints[i - 1].vdd)
+ + temppoints[i - 1].d1;
+ break;
+ }
+
+ return data->val_temp*10 + d1;
+}
+
+/**
+ * sht15_calc_humid() - using last temperature convert raw to humid
+ * @data: device state
+ *
+ * This is the temperature compensated version as per section 4.2 of
+ * the data sheet.
+ **/
+static inline int sht15_calc_humid(struct sht15_data *data)
+{
+ int RHlinear; /* milli percent */
+ int temp = sht15_calc_temp(data);
+
+ const int c1 = -4;
+ const int c2 = 40500; /* x 10 ^ -6 */
+ const int c3 = 2800; /* x10 ^ -9 */
+
+ RHlinear = c1*1000
+ + c2 * data->val_humid/1000
+ + (data->val_humid * data->val_humid * c3)/1000000;
+ return (temp - 25000) * (10000 + 800 * data->val_humid)
+ / 1000000 + RHlinear;
+}
+
+static ssize_t sht15_show_temp(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sht15_data *data = dev_get_drvdata(dev);
+
+ /* Technically no need to read humidity as well */
+ ret = sht15_update_vals(data);
+
+ return ret ? ret : sprintf(buf, "%d\n",
+ sht15_calc_temp(data));
+}
+
+static ssize_t sht15_show_humidity(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ struct sht15_data *data = dev_get_drvdata(dev);
+
+ ret = sht15_update_vals(data);
+
+ return ret ? ret : sprintf(buf, "%d\n", sht15_calc_humid(data));
+
+};
+static ssize_t show_name(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ return sprintf(buf, "%s\n", pdev->name);
+}
+
+static SENSOR_DEVICE_ATTR(temp1_input,
+ S_IRUGO, sht15_show_temp,
+ NULL, 0);
+static SENSOR_DEVICE_ATTR(humidity1_input,
+ S_IRUGO, sht15_show_humidity,
+ NULL, 0);
+static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+static struct attribute *sht15_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_humidity1_input.dev_attr.attr,
+ &dev_attr_name.attr,
+ NULL,
+};
+
+static const struct attribute_group sht15_attr_group = {
+ .attrs = sht15_attrs,
+};
+
+static irqreturn_t sht15_interrupt_fired(int irq, void *d)
+{
+ struct sht15_data *data = d;
+ /* First disable the interrupt */
+ disable_irq_nosync(irq);
+ atomic_inc(&data->interrupt_handled);
+ /* Then schedule a reading work struct */
+ if (data->flag != SHT15_READING_NOTHING)
+ schedule_work(&data->read_work);
+ return IRQ_HANDLED;
+}
+
+/* Each byte of data is acknowledged by pulling the data line
+ * low for one clock pulse.
+ */
+static void sht15_ack(struct sht15_data *data)
+{
+ gpio_direction_output(data->pdata->gpio_data, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_data, 1);
+
+ gpio_direction_input(data->pdata->gpio_data);
+}
+/**
+ * sht15_end_transmission() - notify device of end of transmission
+ * @data: device state
+ *
+ * This is basically a NAK. (single clock pulse, data high)
+ **/
+static void sht15_end_transmission(struct sht15_data *data)
+{
+ gpio_direction_output(data->pdata->gpio_data, 1);
+ ndelay(SHT15_TSU);
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+}
+
+static void sht15_bh_read_data(struct work_struct *work_s)
+{
+ int i;
+ uint16_t val = 0;
+ struct sht15_data *data
+ = container_of(work_s, struct sht15_data,
+ read_work);
+ /* Firstly, verify the line is low */
+ if (gpio_get_value(data->pdata->gpio_data)) {
+ /* If not, then start the interrupt again - care
+ here as could have gone low in meantime so verify
+ it hasn't!
+ */
+ atomic_set(&data->interrupt_handled, 0);
+ enable_irq(gpio_to_irq(data->pdata->gpio_data));
+ /* If still not occured or another handler has been scheduled */
+ if (gpio_get_value(data->pdata->gpio_data)
+ || atomic_read(&data->interrupt_handled))
+ return;
+ }
+ /* Read the data back from the device */
+ for (i = 0; i < 16; ++i) {
+ val <<= 1;
+ gpio_set_value(data->pdata->gpio_sck, 1);
+ ndelay(SHT15_TSCKH);
+ val |= !!gpio_get_value(data->pdata->gpio_data);
+ gpio_set_value(data->pdata->gpio_sck, 0);
+ ndelay(SHT15_TSCKL);
+ if (i == 7)
+ sht15_ack(data);
+ }
+ /* Tell the device we are done */
+ sht15_end_transmission(data);
+
+ switch (data->flag) {
+ case SHT15_READING_TEMP:
+ data->val_temp = val;
+ break;
+ case SHT15_READING_HUMID:
+ data->val_humid = val;
+ break;
+ }
+
+ data->flag = SHT15_READING_NOTHING;
+ wake_up(&data->wait_queue);
+}
+
+static void sht15_update_voltage(struct work_struct *work_s)
+{
+ struct sht15_data *data
+ = container_of(work_s, struct sht15_data,
+ update_supply_work);
+ data->supply_uV = regulator_get_voltage(data->reg);
+}
+
+/**
+ * sht15_invalidate_voltage() - mark supply voltage invalid when notified by reg
+ * @nb: associated notification structure
+ * @event: voltage regulator state change event code
+ * @ignored: function parameter - ignored here
+ *
+ * Note that as the notification code holds the regulator lock, we have
+ * to schedule an update of the supply voltage rather than getting it directly.
+ **/
+static int sht15_invalidate_voltage(struct notifier_block *nb,
+ unsigned long event,
+ void *ignored)
+{
+ struct sht15_data *data = container_of(nb, struct sht15_data, nb);
+
+ if (event == REGULATOR_EVENT_VOLTAGE_CHANGE)
+ data->supply_uV_valid = false;
+ schedule_work(&data->update_supply_work);
+
+ return NOTIFY_OK;
+}
+
+static int __devinit sht15_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct sht15_data *data = kzalloc(sizeof(*data), GFP_KERNEL);
+
+ if (!data) {
+ ret = -ENOMEM;
+ dev_err(&pdev->dev, "kzalloc failed");
+ goto error_ret;
+ }
+
+ INIT_WORK(&data->read_work, sht15_bh_read_data);
+ INIT_WORK(&data->update_supply_work, sht15_update_voltage);
+ platform_set_drvdata(pdev, data);
+ mutex_init(&data->read_lock);
+ data->dev = &pdev->dev;
+ init_waitqueue_head(&data->wait_queue);
+
+ if (pdev->dev.platform_data == NULL) {
+ dev_err(&pdev->dev, "no platform data supplied");
+ goto err_free_data;
+ }
+ data->pdata = pdev->dev.platform_data;
+ data->supply_uV = data->pdata->supply_mv*1000;
+
+/* If a regulator is available, query what the supply voltage actually is!*/
+ data->reg = regulator_get(data->dev, "vcc");
+ if (!IS_ERR(data->reg)) {
+ data->supply_uV = regulator_get_voltage(data->reg);
+ regulator_enable(data->reg);
+ /* setup a notifier block to update this if another device
+ * causes the voltage to change */
+ data->nb.notifier_call = &sht15_invalidate_voltage;
+ ret = regulator_register_notifier(data->reg, &data->nb);
+ }
+/* Try requesting the GPIOs */
+ ret = gpio_request(data->pdata->gpio_sck, "SHT15 sck");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed");
+ goto err_free_data;
+ }
+ gpio_direction_output(data->pdata->gpio_sck, 0);
+ ret = gpio_request(data->pdata->gpio_data, "SHT15 data");
+ if (ret) {
+ dev_err(&pdev->dev, "gpio request failed");
+ goto err_release_gpio_sck;
+ }
+ ret = sysfs_create_group(&pdev->dev.kobj, &sht15_attr_group);
+ if (ret) {
+ dev_err(&pdev->dev, "sysfs create failed");
+ goto err_free_data;
+ }
+
+ ret = request_irq(gpio_to_irq(data->pdata->gpio_data),
+ sht15_interrupt_fired,
+ IRQF_TRIGGER_FALLING,
+ "sht15 data",
+ data);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get irq for data line");
+ goto err_release_gpio_data;
+ }
+ disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
+ sht15_connection_reset(data);
+ sht15_send_cmd(data, 0x1E);
+
+ data->hwmon_dev = hwmon_device_register(data->dev);
+ if (IS_ERR(data->hwmon_dev)) {
+ ret = PTR_ERR(data->hwmon_dev);
+ goto err_release_gpio_data;
+ }
+ return 0;
+
+err_release_gpio_data:
+ gpio_free(data->pdata->gpio_data);
+err_release_gpio_sck:
+ gpio_free(data->pdata->gpio_sck);
+err_free_data:
+ kfree(data);
+error_ret:
+
+ return ret;
+}
+
+static int __devexit sht15_remove(struct platform_device *pdev)
+{
+ struct sht15_data *data = platform_get_drvdata(pdev);
+
+ /* Make sure any reads from the device are done and
+ * prevent new ones beginnning */
+ mutex_lock(&data->read_lock);
+ hwmon_device_unregister(data->hwmon_dev);
+ sysfs_remove_group(&pdev->dev.kobj, &sht15_attr_group);
+ if (!IS_ERR(data->reg)) {
+ regulator_unregister_notifier(data->reg, &data->nb);
+ regulator_disable(data->reg);
+ regulator_put(data->reg);
+ }
+
+ free_irq(gpio_to_irq(data->pdata->gpio_data), data);
+ gpio_free(data->pdata->gpio_data);
+ gpio_free(data->pdata->gpio_sck);
+ mutex_unlock(&data->read_lock);
+ kfree(data);
+ return 0;
+}
+
+
+static struct platform_driver sht_drivers[] = {
+ {
+ .driver = {
+ .name = "sht10",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht11",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht15",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht71",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ }, {
+ .driver = {
+ .name = "sht75",
+ .owner = THIS_MODULE,
+ },
+ .probe = sht15_probe,
+ .remove = sht15_remove,
+ },
+};
+
+
+static int __init sht15_init(void)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(sht_drivers); i++) {
+ ret = platform_driver_register(&sht_drivers[i]);
+ if (ret)
+ goto error_unreg;
+ }
+
+ return 0;
+
+error_unreg:
+ while (--i >= 0)
+ platform_driver_unregister(&sht_drivers[i]);
+
+ return ret;
+}
+module_init(sht15_init);
+
+static void __exit sht15_exit(void)
+{
+ int i;
+ for (i = ARRAY_SIZE(sht_drivers) - 1; i >= 0; i--)
+ platform_driver_unregister(&sht_drivers[i]);
+}
+module_exit(sht15_exit);
+
+MODULE_LICENSE("GPL");
data->pwm[i] =
w83781d_read_value(data,
W83781D_REG_PWM[i]);
- if ((data->type != w83782d || !client->driver)
+ /* Only W83782D on SMBus has PWM3 and PWM4 */
+ if ((data->type != w83782d || !client)
&& i == 1)
break;
}
* chips may hold it low ("clock stretching") while they
* are processing data internally.
*/
- if (time_after_eq(jiffies, start + adap->timeout))
+ if (time_after(jiffies, start + adap->timeout))
return -ETIMEDOUT;
cond_resched();
}
case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */
DEB2("NOT ACK received after data byte\n");
+ pca_stop(adap);
goto out;
case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */
DEB2("Arbitration lost\n");
+ /*
+ * The PCA9564 data sheet (2006-09-01) says "A
+ * START condition will be transmitted when the
+ * bus becomes free (STOP or SCL and SDA high)"
+ * when the STA bit is set (p. 11).
+ *
+ * In case this won't work, try pca_reset()
+ * instead.
+ */
+ pca_start(adap);
goto out;
case 0x58: /* Data byte has been received; NOT ACK has been returned */
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
- depends on ARCH_S3C2410
+ depends on ARCH_S3C2410 || ARCH_S3C64XX
help
Say Y here to include support for I2C controller in the
Samsung S3C2410 based System-on-Chip devices.
&& (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
&& (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
(timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
goto abort;
}
} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "Completion timeout!\n");
goto abort;
}
rbdf = cpm->rbase;
for (i = 0; i < CPM_MAXBD; i++) {
- cpm->rxbuf[i] = dma_alloc_coherent(
- NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL);
+ cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev,
+ CPM_MAX_READ + 1,
+ &cpm->rxdma[i], GFP_KERNEL);
if (!cpm->rxbuf[i]) {
ret = -ENOMEM;
goto out_muram;
}
out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));
- cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(
- NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
+ cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
if (!cpm->txbuf[i]) {
ret = -ENOMEM;
goto out_muram;
out_muram:
for (i = 0; i < CPM_MAXBD; i++) {
if (cpm->rxbuf[i])
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->rxbuf[i], cpm->rxdma[i]);
if (cpm->txbuf[i])
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->txbuf[i], cpm->txdma[i]);
}
cpm_muram_free(cpm->dp_addr);
/* Free all memory */
for (i = 0; i < CPM_MAXBD; i++) {
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->rxbuf[i], cpm->rxdma[i]);
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->txbuf[i], cpm->txdma[i]);
}
status = inb_p(SMBHSTSTS);
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ result = i801_check_post(status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
} while ((!(status & SMBHSTSTS_INTR))
&& (timeout++ < MAX_TIMEOUT));
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT)
dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
- }
+
outb_p(status, SMBHSTSTS);
}
while ((!(status & SMBHSTSTS_BYTE_DONE))
&& (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ result = i801_check_post(status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
} while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_err(&sch_adapter.dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
return 0;
}
-#ifdef CONFIG_PPC_52xx
+#ifdef CONFIG_PPC_MPC52xx
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
{
- const struct mpc52xx_i2c_divider *div = NULL;
+ const struct mpc_i2c_divider *div = NULL;
unsigned int pvr = mfspr(SPRN_PVR);
u32 divider;
int i;
* We want to choose an FDR/DFSR that generates an I2C bus speed that
* is equal to or lower than the requested speed.
*/
- for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) {
+ for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
div = &mpc_i2c_dividers_52xx[i];
/* Old MPC5200 rev A CPUs do not support the high bits */
if (div->fdr & 0xc0 && pvr == 0x80822011)
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
- int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler);
+ int ret, fdr;
+
+ ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
+ fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
- if (fdr < 0)
- fdr = 0x3f; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
- dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
}
-#else /* !CONFIG_PPC_52xx */
+#else /* !CONFIG_PPC_MPC52xx */
static void mpc_i2c_setclock_52xx(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
}
-#endif /* CONFIG_PPC_52xx*/
+#endif /* CONFIG_PPC_MPC52xx*/
#ifdef CONFIG_FSL_SOC
static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
- int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+ int ret, fdr;
+
+ ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+ fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
- if (fdr < 0)
- fdr = 0x1031; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
- dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
- clock, fdr >> 8, fdr & 0xff);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
+ clock, fdr >> 8, fdr & 0xff);
}
#else /* !CONFIG_FSL_SOC */
temp = inb_p(NVIDIA_SMB_STS);
} while ((!temp) && (timeout++ < MAX_TIMEOUT));
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
if (smbus->can_abort)
nforce2_abort(adap);
show_state(i2c);
}
- if (timeout <= 0)
+ if (timeout < 0)
show_state(i2c);
- return timeout <= 0 ? I2C_RETRY : 0;
+ return timeout < 0 ? I2C_RETRY : 0;
}
static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
show_state(i2c);
}
- if (timeout <= 0) {
+ if (timeout < 0) {
show_state(i2c);
dev_err(&i2c->adap.dev,
"i2c_pxa: timeout waiting for bus free\n");
} while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
result = -ETIMEDOUT;
}
.dma_test_irq = ide_dma_test_irq,
.dma_lost_irq = ide_dma_lost_irq,
.dma_timer_expiry = ide_dma_sff_timer_expiry,
+ .dma_sff_read_status = ide_dma_sff_read_status,
};
static const struct ide_port_info cs5536_info = {
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* Portions Copyright (C) 2003 Red Hat Inc
* Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- * Portions Copyright (C) 2005-2008 MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009 MontaVista Software, Inc.
*
* Thanks to HighPoint Technologies for their assistance, and hardware.
* Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
* the register setting lists into the table indexed by the clock selected
* - set the correct hwif->ultra_mask for each individual chip
* - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards
+ * - stop resetting HPT370's state machine before each DMA transfer as that has
+ * caused more harm than good
* Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
*/
#define DRV_NAME "hpt366"
/* various tuning parameters */
-#define HPT_RESET_STATE_ENGINE
+#undef HPT_RESET_STATE_ENGINE
#undef HPT_DELAY_INTERRUPT
static const char *quirk_drives[] = {
/* get DMA command mode */
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
/* stop DMA */
- outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD);
+ outb(dma_cmd & ~ATA_DMA_START, hwif->dma_base + ATA_DMA_CMD);
hpt370_clear_engine(drive);
}
ide_hwif_t *hwif = drive->hwif;
u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- if (dma_stat & 0x01) {
+ if (dma_stat & ATA_DMA_ACTIVE) {
/* wait a little */
udelay(20);
dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- if (dma_stat & 0x01)
+ if (dma_stat & ATA_DMA_ACTIVE)
hpt370_irq_timeout(drive);
}
return ide_dma_end(drive);
dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
/* return 1 if INTR asserted */
- if (dma_stat & 4)
+ if (dma_stat & ATA_DMA_INTR)
return 1;
return 0;
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->rq;
int err, sense_key, do_end_request = 0;
- u8 quiet = rq->cmd_flags & REQ_QUIET;
/* get the IDE error register */
err = ide_read_error(drive);
} else {
cdrom_saw_media_change(drive);
- if (blk_fs_request(rq) && !quiet)
+ if (blk_fs_request(rq) && !blk_rq_quiet(rq))
printk(KERN_ERR PFX "%s: tray open\n",
drive->name);
}
* No point in retrying after an illegal request or data
* protect error.
*/
- if (!quiet)
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "command error", stat);
do_end_request = 1;
break;
* No point in re-trying a zillion times on a bad sector.
* If we got here the error is not correctable.
*/
- if (!quiet)
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "media error "
"(bad sector)", stat);
do_end_request = 1;
break;
case BLANK_CHECK:
/* disk appears blank? */
- if (!quiet)
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "media error (blank)",
stat);
do_end_request = 1;
struct request *rq = hwif->rq;
ide_expiry_t *expiry = NULL;
int dma_error = 0, dma, thislen, uptodate = 0;
- int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc, nsectors;
+ int write = (rq_data_dir(rq) == WRITE) ? 1 : 0, rc = 0, nsectors;
int sense = blk_sense_request(rq);
unsigned int timeout;
u16 len;
#include <linux/mutex.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
+#include <linux/dmi.h>
#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
#define IDE_DISK_MINORS (1 << PARTN_BITS)
(void)drive->disk_ops->get_capacity(drive);
}
+static const struct dmi_system_id ide_coldreboot_table[] = {
+ {
+ /* Acer TravelMate 66x cuts power during reboot */
+ .ident = "Acer TravelMate 660",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+ },
+ },
+
+ { } /* terminate list */
+};
+
static void ide_gd_shutdown(ide_drive_t *drive)
{
#ifdef CONFIG_ALPHA
the disk to expire its write cache. */
if (system_state != SYSTEM_POWER_OFF) {
#else
- if (system_state == SYSTEM_RESTART) {
+ if (system_state == SYSTEM_RESTART &&
+ !dmi_check_system(ide_coldreboot_table)) {
#endif
drive->disk_ops->flush(drive);
return;
drive->dev_flags |= IDE_DFLAG_PARKED;
}
- if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
- memcpy(rq->special, cmd, sizeof(*cmd));
+ if (rq && rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
+ struct ide_cmd *orig_cmd = rq->special;
- if (cmd->tf_flags & IDE_TFLAG_DYN)
- kfree(cmd);
+ if (cmd->tf_flags & IDE_TFLAG_DYN)
+ kfree(orig_cmd);
+ else
+ memcpy(orig_cmd, cmd, sizeof(*cmd));
+ }
}
/* obsolete, blk_rq_bytes() should be used instead */
/* Primary Control Offset */
#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
-/*
- * PalmChip 3710 IDE Controller UDMA timing structure Definition
- */
-struct palm_bk3710_udmatiming {
- unsigned int rptime; /* Ready to pause time */
- unsigned int cycletime; /* Cycle Time */
-};
-
#define BK3710_BMICP 0x00
#define BK3710_BMISP 0x02
#define BK3710_BMIDTP 0x04
-#define BK3710_BMICS 0x08
-#define BK3710_BMISS 0x0A
-#define BK3710_BMIDTS 0x0C
#define BK3710_IDETIMP 0x40
-#define BK3710_IDETIMS 0x42
-#define BK3710_SIDETIM 0x44
-#define BK3710_SLEWCTL 0x45
#define BK3710_IDESTATUS 0x47
#define BK3710_UDMACTL 0x48
-#define BK3710_UDMATIM 0x4A
#define BK3710_MISCCTL 0x50
#define BK3710_REGSTB 0x54
#define BK3710_REGRCVR 0x58
#define BK3710_UDMATRP 0x70
#define BK3710_UDMAENV 0x74
#define BK3710_IORDYTMP 0x78
-#define BK3710_IORDYTMS 0x7C
static unsigned ideclk_period; /* in nanoseconds */
+struct palm_bk3710_udmatiming {
+ unsigned int rptime; /* tRP -- Ready to pause time (nsec) */
+ unsigned int cycletime; /* tCYCTYP2/2 -- avg Cycle Time (nsec) */
+ /* tENV is always a minimum of 20 nsec */
+};
+
static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
- {160, 240}, /* UDMA Mode 0 */
- {125, 160}, /* UDMA Mode 1 */
- {100, 120}, /* UDMA Mode 2 */
- {100, 90}, /* UDMA Mode 3 */
- {100, 60}, /* UDMA Mode 4 */
- {85, 40}, /* UDMA Mode 5 */
+ { 160, 240 / 2 }, /* UDMA Mode 0 */
+ { 125, 160 / 2 }, /* UDMA Mode 1 */
+ { 100, 120 / 2 }, /* UDMA Mode 2 */
+ { 100, 90 / 2 }, /* UDMA Mode 3 */
+ { 100, 60 / 2 }, /* UDMA Mode 4 */
+ { 85, 40 / 2 }, /* UDMA Mode 5 */
};
static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
ideclk_period) - 1;
- /* udmatim Register */
- val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
- val16 |= (mode << (dev ? 4 : 0));
- writew(val16, base + BK3710_UDMATIM);
-
/* udmastb Ultra DMA Access Strobe Width */
val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
val32 |= (t0 << (dev ? 8 : 0));
u32 val32;
struct ide_timing *t;
+ t = ide_timing_find_mode(XFER_PIO_0 + mode);
+
/* PIO Data Setup */
t0 = DIV_ROUND_UP(cycletime, ideclk_period);
- t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
- ideclk_period);
+ t2 = DIV_ROUND_UP(t->active, ideclk_period);
t2i = t0 - t2 - 1;
t2 -= 1;
}
/* TASKFILE Setup */
- t = ide_timing_find_mode(XFER_PIO_0 + mode);
t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
static void __devinit palm_bk3710_chipinit(void __iomem *base)
{
/*
- * enable the reset_en of ATA controller so that when ata signals
- * are brought out, by writing into device config. at that
- * time por_n signal should not be 'Z' and have a stable value.
+ * REVISIT: the ATA reset signal needs to be managed through a
+ * GPIO, which means it should come from platform_data. Until
+ * we get and use such information, we have to trust that things
+ * have been reset before we get here.
*/
- writel(0x0300, base + BK3710_MISCCTL);
-
- /* wait for some time and deassert the reset of ATA Device. */
- mdelay(100);
-
- /* Deassert the Reset */
- writel(0x0200, base + BK3710_MISCCTL);
/*
* Program the IDETIMP Register Value based on the following assumptions
*
* (ATA_IDETIMP_IDEEN , ENABLE ) |
- * (ATA_IDETIMP_SLVTIMEN , DISABLE) |
- * (ATA_IDETIMP_RDYSMPL , 70NS) |
- * (ATA_IDETIMP_RDYRCVRY , 50NS) |
- * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) |
* (ATA_IDETIMP_PREPOST1 , DISABLE) |
- * (ATA_IDETIMP_RDYSEN1 , DISABLE) |
- * (ATA_IDETIMP_PIOFTIM1 , DISABLE) |
- * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) |
* (ATA_IDETIMP_PREPOST0 , DISABLE) |
- * (ATA_IDETIMP_RDYSEN0 , DISABLE) |
- * (ATA_IDETIMP_PIOFTIM0 , DISABLE)
- */
- writew(0xB388, base + BK3710_IDETIMP);
-
- /*
- * Configure SIDETIM Register
- * (ATA_SIDETIM_RDYSMPS1 ,120NS ) |
- * (ATA_SIDETIM_RDYRCYS1 ,120NS )
+ *
+ * DM6446 silicon rev 2.1 and earlier have no observed net benefit
+ * from enabling prefetch/postwrite.
*/
- writeb(0, base + BK3710_SIDETIM);
+ writew(BIT(15), base + BK3710_IDETIMP);
/*
* UDMACTL Ultra-ATA DMA Control
/*
* MISCCTL Miscellaneous Conrol Register
- * (ATA_MISCCTL_RSTMODEP , 1) |
- * (ATA_MISCCTL_RESETP , 0) |
+ * (ATA_MISCCTL_HWNHLD1P , 1 cycle)
+ * (ATA_MISCCTL_HWNHLD0P , 1 cycle)
* (ATA_MISCCTL_TIMORIDE , 1)
*/
- writel(0x201, base + BK3710_MISCCTL);
+ writel(0x001, base + BK3710_MISCCTL);
/*
* IORDYTMP IORDY Timer for Primary Register
clk_enable(clk);
rate = clk_get_rate(clk);
- ideclk_period = 1000000000UL / rate;
- /* Register the IDE interface with Linux ATA Interface */
- memset(&hw, 0, sizeof(hw));
+ /* NOTE: round *down* to meet minimum timings; we count in clocks */
+ ideclk_period = 1000000000UL / rate;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (mem == NULL) {
/* Configure the Palm Chip controller */
palm_bk3710_chipinit(base);
+ memset(&hw, 0, sizeof(hw));
for (i = 0; i < IDE_NR_PORTS - 2; i++)
hw.io_ports_array[i] = (unsigned long)
(base + IDE_PALM_ATA_PRI_REG_OFFSET + i);
palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
ATA_UDMA5;
+ /* Register the IDE interface with Linux */
rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
if (rc)
goto out;
* The +2 is +1 for the stop command and +1 to allow for
* aligning the start address to a multiple of 16 bytes.
*/
- pmif->dma_table_cpu = (struct dbdma_cmd*)pci_alloc_consistent(
+ pmif->dma_table_cpu = pci_alloc_consistent(
dev,
(MAX_DCMDS + 2) * sizeof(struct dbdma_cmd),
&hwif->dmatable_dma);
ptr = wq->sq_rptr + count;
sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
while (ptr != wq->sq_wptr) {
+ sqp->signaled = 0;
insert_sq_cqe(wq, cq, sqp);
ptr++;
sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
ep->com.rpl_err = 0;
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
+
+ if (peer2peer && ep->ird == 0)
+ ep->ird = 1;
+
PDBG("%s %d ird %d ord %d\n", __func__, __LINE__, ep->ird, ep->ord);
get_ep(&ep->com);
conn_param->private_data, ep->plen);
ep->ird = conn_param->ird;
ep->ord = conn_param->ord;
+
+ if (peer2peer && ep->ord == 0)
+ ep->ord = 1;
+
ep->com.tdev = h->rdev.t3cdev_p;
cm_id->add_ref(cm_id);
goto out;
}
qhp->attr.state = IWCH_QP_STATE_IDLE;
- memset(&qhp->attr, 0, sizeof(qhp->attr));
break;
case IWCH_QP_STATE_TERMINATE:
if (!internal) {
spin_unlock_irqrestore(&ipath_devs_lock, flags);
ret = create_device_files(sb, dd);
if (ret) {
- deactivate_super(sb);
+ deactivate_locked_super(sb);
goto bail;
}
spin_lock_irqsave(&ipath_devs_lock, flags);
struct mlx4_ib_fast_reg_page_list {
struct ib_fast_reg_page_list ibfrpl;
+ __be64 *mapped_page_list;
dma_addr_t map;
};
if (!mfrpl)
return ERR_PTR(-ENOMEM);
- mfrpl->ibfrpl.page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
+ mfrpl->ibfrpl.page_list = kmalloc(size, GFP_KERNEL);
+ if (!mfrpl->ibfrpl.page_list)
+ goto err_free;
+
+ mfrpl->mapped_page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
size, &mfrpl->map,
GFP_KERNEL);
if (!mfrpl->ibfrpl.page_list)
return &mfrpl->ibfrpl;
err_free:
+ kfree(mfrpl->ibfrpl.page_list);
kfree(mfrpl);
return ERR_PTR(-ENOMEM);
}
struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(page_list);
int size = page_list->max_page_list_len * sizeof (u64);
- dma_free_coherent(&dev->dev->pdev->dev, size, page_list->page_list,
+ dma_free_coherent(&dev->dev->pdev->dev, size, mfrpl->mapped_page_list,
mfrpl->map);
+ kfree(mfrpl->ibfrpl.page_list);
kfree(mfrpl);
}
int i;
for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
- wr->wr.fast_reg.page_list->page_list[i] =
+ mfrpl->mapped_page_list[i] =
cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
MLX4_MTT_FLAG_PRESENT);
enum {
CMD_TIME_CLASS_A = (HZ + 999) / 1000 + 1,
CMD_TIME_CLASS_B = (HZ + 99) / 100 + 1,
- CMD_TIME_CLASS_C = (HZ + 9) / 10 + 1
+ CMD_TIME_CLASS_C = (HZ + 9) / 10 + 1,
+ CMD_TIME_CLASS_D = 60 * HZ
};
#else
enum {
CMD_TIME_CLASS_A = 60 * HZ,
CMD_TIME_CLASS_B = 60 * HZ,
- CMD_TIME_CLASS_C = 60 * HZ
+ CMD_TIME_CLASS_C = 60 * HZ,
+ CMD_TIME_CLASS_D = 60 * HZ
};
#endif
u64 out;
int ret;
- ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, HZ, status);
+ ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, CMD_TIME_CLASS_D, status);
if (*status == MTHCA_CMD_STAT_DDR_MEM_ERR)
mthca_warn(dev, "SYS_EN DDR error: syn=%x, sock=%d, "
int mthca_SYS_DIS(struct mthca_dev *dev, u8 *status)
{
- return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, HZ, status);
+ return mthca_cmd(dev, 0, 0, 0, CMD_SYS_DIS, CMD_TIME_CLASS_C, status);
}
static int mthca_map_cmd(struct mthca_dev *dev, u16 op, struct mthca_icm *icm,
MTHCA_PUT(inbox, param->uarc_base, INIT_HCA_UAR_CTX_BASE_OFFSET);
}
- err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, HZ, status);
+ err = mthca_cmd(dev, mailbox->dma, 0, 0, CMD_INIT_HCA, CMD_TIME_CLASS_D, status);
mthca_free_mailbox(dev, mailbox);
return err;
int mthca_CLOSE_IB(struct mthca_dev *dev, int port, u8 *status)
{
- return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, HZ, status);
+ return mthca_cmd(dev, 0, port, 0, CMD_CLOSE_IB, CMD_TIME_CLASS_A, status);
}
int mthca_CLOSE_HCA(struct mthca_dev *dev, int panic, u8 *status)
{
- return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, HZ, status);
+ return mthca_cmd(dev, 0, 0, panic, CMD_CLOSE_HCA, CMD_TIME_CLASS_C, status);
}
int mthca_SET_IB(struct mthca_dev *dev, struct mthca_set_ib_param *param,
#define QUEUE_DISCONNECTS
-#define DRV_BUILD "1"
-
#define DRV_NAME "iw_nes"
-#define DRV_VERSION "1.0 KO Build " DRV_BUILD
+#define DRV_VERSION "1.5.0.0"
#define PFX DRV_NAME ": "
/*
#include <net/neighbour.h>
#include <net/route.h>
#include <net/ip_fib.h>
+#include <net/tcp.h>
#include "nes.h"
struct list_head *list_node;
struct nes_cm_core *cm_core = g_cm_core;
u32 settimer = 0;
+ unsigned long timetosend;
int ret = NETDEV_TX_OK;
struct list_head timer_list;
send_entry->retrycount);
if (send_entry->send_retrans) {
send_entry->retranscount--;
+ timetosend = (NES_RETRY_TIMEOUT <<
+ (NES_DEFAULT_RETRANS - send_entry->retranscount));
+
send_entry->timetosend = jiffies +
- NES_RETRY_TIMEOUT;
+ min(timetosend, NES_MAX_TIMEOUT);
if (nexttimeout > send_entry->timetosend ||
!settimer) {
nexttimeout = send_entry->timetosend;
{
unsigned long flags;
struct nes_cm_listener *listen_node;
- __be32 tmp_addr = cpu_to_be32(dst_addr);
/* walk list and find cm_node associated with this session ID */
spin_lock_irqsave(&cm_core->listen_list_lock, flags);
}
spin_unlock_irqrestore(&cm_core->listen_list_lock, flags);
- nes_debug(NES_DBG_CM, "Unable to find listener for %pI4:%x\n",
- &tmp_addr, dst_port);
-
/* no listener */
return NULL;
}
nes_debug(NES_DBG_CM, "Received FIN, cm_node = %p, state = %u. "
"refcnt=%d\n", cm_node, cm_node->state,
atomic_read(&cm_node->ref_count));
- cm_node->tcp_cntxt.rcv_nxt++;
- cleanup_retrans_entry(cm_node);
switch (cm_node->state) {
case NES_CM_STATE_SYN_RCVD:
case NES_CM_STATE_SYN_SENT:
case NES_CM_STATE_ESTABLISHED:
case NES_CM_STATE_MPAREQ_SENT:
case NES_CM_STATE_MPAREJ_RCVD:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_LAST_ACK;
send_fin(cm_node, NULL);
break;
case NES_CM_STATE_FIN_WAIT1:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSING;
send_ack(cm_node, NULL);
/* Wait for ACK as this is simultanous close..
* Just rm the node.. Done.. */
break;
case NES_CM_STATE_FIN_WAIT2:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_TIME_WAIT;
send_ack(cm_node, NULL);
schedule_nes_timer(cm_node, NULL, NES_TIMER_TYPE_CLOSE, 1, 0);
break;
case NES_CM_STATE_TIME_WAIT:
+ cm_node->tcp_cntxt.rcv_nxt++;
+ cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
rem_ref_cm_node(cm_node->cm_core, cm_node);
break;
passive_state = atomic_add_return(1, &cm_node->passive_state);
if (passive_state == NES_SEND_RESET_EVENT)
create_event(cm_node, NES_CM_EVENT_RESET);
- cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
dev_kfree_skb_any(skb);
break;
active_open_err(cm_node, skb, reset);
break;
case NES_CM_STATE_CLOSED:
- cleanup_retrans_entry(cm_node);
drop_packet(skb);
break;
+ case NES_CM_STATE_LAST_ACK:
+ cm_node->cm_id->rem_ref(cm_node->cm_id);
case NES_CM_STATE_TIME_WAIT:
- cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
rem_ref_cm_node(cm_node->cm_core, cm_node);
drop_packet(skb);
break;
case NES_CM_STATE_FIN_WAIT1:
- cleanup_retrans_entry(cm_node);
nes_debug(NES_DBG_CM, "Bad state %s[%u]\n", __func__, __LINE__);
default:
drop_packet(skb);
NES_PASSIVE_STATE_INDICATED);
break;
case NES_CM_STATE_MPAREQ_SENT:
+ cleanup_retrans_entry(cm_node);
if (res_type == NES_MPA_REQUEST_REJECT) {
type = NES_CM_EVENT_MPA_REJECT;
cm_node->state = NES_CM_STATE_MPAREJ_RCVD;
rcv_wnd = cm_node->tcp_cntxt.rcv_wnd;
if (ack_seq != loc_seq_num)
err = 1;
- else if ((seq + rcv_wnd) < rcv_nxt)
+ else if (!between(seq, rcv_nxt, (rcv_nxt+rcv_wnd)))
err = 1;
if (err) {
nes_debug(NES_DBG_CM, "%s[%u] create abort for cm_node=%p "
}
}
-static void handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
+static int handle_ack_pkt(struct nes_cm_node *cm_node, struct sk_buff *skb,
struct tcphdr *tcph)
{
int datasize = 0;
u32 inc_sequence;
u32 rem_seq_ack;
u32 rem_seq;
- int ret;
+ int ret = 0;
int optionsize;
optionsize = (tcph->doff << 2) - sizeof(struct tcphdr);
if (check_seq(cm_node, tcph, skb))
- return;
+ return -EINVAL;
skb_pull(skb, tcph->doff << 2);
inc_sequence = ntohl(tcph->seq);
rem_seq = ntohl(tcph->seq);
rem_seq_ack = ntohl(tcph->ack_seq);
datasize = skb->len;
- cleanup_retrans_entry(cm_node);
switch (cm_node->state) {
case NES_CM_STATE_SYN_RCVD:
/* Passive OPEN */
+ cleanup_retrans_entry(cm_node);
ret = handle_tcp_options(cm_node, tcph, skb, optionsize, 1);
if (ret)
break;
cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
- if (cm_node->tcp_cntxt.rem_ack_num !=
- cm_node->tcp_cntxt.loc_seq_num) {
- nes_debug(NES_DBG_CM, "rem_ack_num != loc_seq_num\n");
- cleanup_retrans_entry(cm_node);
- send_reset(cm_node, skb);
- return;
- }
cm_node->state = NES_CM_STATE_ESTABLISHED;
- cleanup_retrans_entry(cm_node);
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
handle_rcv_mpa(cm_node, skb);
- } else { /* rcvd ACK only */
+ } else /* rcvd ACK only */
dev_kfree_skb_any(skb);
- cleanup_retrans_entry(cm_node);
- }
break;
case NES_CM_STATE_ESTABLISHED:
/* Passive OPEN */
drop_packet(skb);
break;
case NES_CM_STATE_MPAREQ_SENT:
- cleanup_retrans_entry(cm_node);
cm_node->tcp_cntxt.rem_ack_num = ntohl(tcph->ack_seq);
if (datasize) {
cm_node->tcp_cntxt.rcv_nxt = inc_sequence + datasize;
handle_rcv_mpa(cm_node, skb);
- } else { /* Could be just an ack pkt.. */
- cleanup_retrans_entry(cm_node);
+ } else /* Could be just an ack pkt.. */
dev_kfree_skb_any(skb);
- }
break;
case NES_CM_STATE_LISTENING:
case NES_CM_STATE_CLOSED:
send_reset(cm_node, skb);
break;
case NES_CM_STATE_LAST_ACK:
+ case NES_CM_STATE_CLOSING:
cleanup_retrans_entry(cm_node);
cm_node->state = NES_CM_STATE_CLOSED;
cm_node->cm_id->rem_ref(cm_node->cm_id);
- case NES_CM_STATE_CLOSING:
- cleanup_retrans_entry(cm_node);
rem_ref_cm_node(cm_node->cm_core, cm_node);
drop_packet(skb);
break;
case NES_CM_STATE_MPAREQ_RCVD:
case NES_CM_STATE_UNKNOWN:
default:
+ cleanup_retrans_entry(cm_node);
drop_packet(skb);
break;
}
+ return ret;
}
enum nes_tcpip_pkt_type pkt_type = NES_PKT_TYPE_UNKNOWN;
struct tcphdr *tcph = tcp_hdr(skb);
u32 fin_set = 0;
+ int ret = 0;
skb_pull(skb, ip_hdr(skb)->ihl << 2);
nes_debug(NES_DBG_CM, "process_packet: cm_node=%p state =%d syn=%d "
handle_synack_pkt(cm_node, skb, tcph);
break;
case NES_PKT_TYPE_ACK:
- handle_ack_pkt(cm_node, skb, tcph);
- if (fin_set)
+ ret = handle_ack_pkt(cm_node, skb, tcph);
+ if (fin_set && !ret)
handle_fin_pkt(cm_node);
break;
case NES_PKT_TYPE_RST:
handle_rst_pkt(cm_node, skb, tcph);
break;
default:
- drop_packet(skb);
- if (fin_set)
+ if ((fin_set) && (!check_seq(cm_node, tcph, skb)))
handle_fin_pkt(cm_node);
+ drop_packet(skb);
break;
}
}
/* associate the node with the QP */
nesqp->cm_node = (void *)cm_node;
cm_node->nesqp = nesqp;
- nes_add_ref(&nesqp->ibqp);
nes_debug(NES_DBG_CM, "QP%u, cm_node=%p, jiffies = %lu listener = %p\n",
nesqp->hwqp.qp_id, cm_node, jiffies, cm_node->listener);
nes_debug(NES_DBG_CM, "Unable to register memory region"
"for lSMM for cm_node = %p \n",
cm_node);
+ pci_free_consistent(nesdev->pcidev,
+ nesqp->private_data_len+sizeof(struct ietf_mpa_frame),
+ nesqp->ietf_frame, nesqp->ietf_frame_pbase);
return -ENOMEM;
}
/* notify OF layer that accept event was successful */
cm_id->add_ref(cm_id);
+ nes_add_ref(&nesqp->ibqp);
cm_event.event = IW_CM_EVENT_ESTABLISHED;
cm_event.status = IW_CM_EVENT_STATUS_ACCEPTED;
struct nes_device *nesdev;
struct nes_cm_node *cm_node;
struct nes_cm_info cm_info;
+ int apbvt_set = 0;
ibqp = nes_get_qp(cm_id->device, conn_param->qpn);
if (!ibqp)
conn_param->private_data_len);
if (cm_id->local_addr.sin_addr.s_addr !=
- cm_id->remote_addr.sin_addr.s_addr)
+ cm_id->remote_addr.sin_addr.s_addr) {
nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
PCI_FUNC(nesdev->pcidev->devfn), NES_MANAGE_APBVT_ADD);
+ apbvt_set = 1;
+ }
/* set up the connection params for the node */
cm_info.loc_addr = htonl(cm_id->local_addr.sin_addr.s_addr);
conn_param->private_data_len, (void *)conn_param->private_data,
&cm_info);
if (!cm_node) {
- if (cm_id->local_addr.sin_addr.s_addr !=
- cm_id->remote_addr.sin_addr.s_addr)
+ if (apbvt_set)
nes_manage_apbvt(nesvnic, ntohs(cm_id->local_addr.sin_port),
PCI_FUNC(nesdev->pcidev->devfn),
NES_MANAGE_APBVT_DEL);
return -ENOMEM;
}
- cm_node->apbvt_set = 1;
+ cm_node->apbvt_set = apbvt_set;
nesqp->cm_node = cm_node;
cm_node->nesqp = nesqp;
nes_add_ref(&nesqp->ibqp);
#endif
#define NES_SHORT_TIME (10)
#define NES_LONG_TIME (2000*HZ/1000)
+#define NES_MAX_TIMEOUT ((unsigned long) (12*HZ))
#define NES_CM_HASHTABLE_SIZE 1024
#define NES_CM_TCP_TIMER_INTERVAL 3000
msleep(1);
}
if (int_cnt > 1) {
- u32 sds;
spin_lock_irqsave(&nesadapter->phy_lock, flags);
- sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
- sds |= 0x00000040;
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, 0x0000F0C8);
mh_detected++;
reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET);
reset_value |= 0x0000003d;
if (++ext_cnt > int_cnt) {
spin_lock_irqsave(&nesadapter->phy_lock, flags);
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1,
- 0x0000F0C8);
+ 0x0000F088);
mh_detected++;
reset_value = nes_read32(nesdev->regs+NES_SOFTWARE_RESET);
reset_value |= 0x0000003d;
return 0;
/* init serdes 1 */
+ if (!(OneG_Mode && (nesadapter->phy_type[1] != NES_PHY_TYPE_PUMA_1G)))
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF);
+
switch (nesadapter->phy_type[1]) {
case NES_PHY_TYPE_ARGUS:
case NES_PHY_TYPE_SFP_D:
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_EMP1, 0x00000000);
break;
case NES_PHY_TYPE_CX4:
- sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
- sds &= 0xFFFFFFBF;
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
if (wide_ppm_offset)
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000FFFAA);
- else
- nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_CDR_CONTROL1, 0x000000FF);
break;
case NES_PHY_TYPE_PUMA_1G:
sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
sds |= 0x000000100;
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
}
- if (!OneG_Mode)
+ if (!OneG_Mode) {
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_TX_HIGHZ_LANE_MODE1, 0x11110000);
+ sds = nes_read_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1);
+ sds &= 0xFFFFFFBF;
+ nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL1, sds);
+ }
} else {
/* init serdes 0 */
nes_write_indexed(nesdev, NES_IDX_ETH_SERDES_COMMON_CONTROL0, 0x00000008);
u32temp &= 0x7fffffff;
u32temp |= 0x7fff0010;
nes_write_indexed(nesdev, 0x000021f8, u32temp);
+ if (port_count > 1) {
+ u32temp = nes_read_indexed(nesdev, 0x000023f8);
+ u32temp &= 0x7fffffff;
+ u32temp |= 0x7fff0010;
+ nes_write_indexed(nesdev, 0x000023f8, u32temp);
+ }
}
}
if (phy_type == NES_PHY_TYPE_ARGUS) {
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x000C);
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0008);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001);
} else {
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc302, 0x0004);
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc319, 0x0038);
+ nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0013);
}
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xc31a, 0x0098);
nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0026, 0x0E00);
- nes_write_10G_phy_reg(nesdev, phy_index, 0x3, 0x0027, 0x0001);
/* setup LEDs */
nes_write_10G_phy_reg(nesdev, phy_index, 0x1, 0xd006, 0x0007);
nescq->hw_cq.cq_number = nes_ucontext->mcrqf & 0xffff;
else
nescq->hw_cq.cq_number = nesvnic->mcrq_qp_id + nes_ucontext->mcrqf-1;
+ nescq->mcrqf = nes_ucontext->mcrqf;
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
}
nes_debug(NES_DBG_CQ, "CQ Virtual Address = %08lX, size = %u.\n",
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
+
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-ENOMEM);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-ENOMEM);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-ENOMEM);
if (!context)
pci_free_consistent(nesdev->pcidev, nescq->cq_mem_size, mem,
nescq->hw_cq.cq_pbase);
+ else {
+ pci_free_consistent(nesdev->pcidev, nespbl->pbl_size,
+ nespbl->pbl_vbase, nespbl->pbl_pbase);
+ kfree(nespbl);
+ }
nes_free_resource(nesadapter, nesadapter->allocated_cqs, cq_num);
kfree(nescq);
return ERR_PTR(-EIO);
set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_OPCODE_IDX, opcode);
set_wqe_32bit_value(cqp_wqe->wqe_words, NES_CQP_WQE_ID_IDX,
(nescq->hw_cq.cq_number | ((u32)PCI_FUNC(nesdev->pcidev->devfn) << 16)));
- nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number);
+ if (!nescq->mcrqf)
+ nes_free_resource(nesadapter, nesadapter->allocated_cqs, nescq->hw_cq.cq_number);
+
atomic_set(&cqp_request->refcount, 2);
nes_post_cqp_request(nesdev, cqp_request);
static u32 root_256(struct nes_device *nesdev,
struct nes_root_vpbl *root_vpbl,
struct nes_root_vpbl *new_root,
- u16 pbl_count_4k,
- u16 pbl_count_256)
+ u16 pbl_count_4k)
{
u64 leaf_pbl;
int i, j, k;
int ret;
struct nes_adapter *nesadapter = nesdev->nesadapter;
uint pg_cnt = 0;
- u16 pbl_count_256;
+ u16 pbl_count_256 = 0;
u16 pbl_count = 0;
u8 use_256_pbls = 0;
u8 use_4k_pbls = 0;
}
if (use_256_pbls && use_two_level) {
- if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k, pbl_count_256) == 1) {
+ if (root_256(nesdev, root_vpbl, &new_root, pbl_count_4k) == 1) {
if (new_root.pbl_pbase != 0)
root_vpbl = &new_root;
} else {
struct nes_root_vpbl root_vpbl;
u32 stag;
u32 i;
+ unsigned long mask;
u32 stag_index = 0;
u32 next_stag_index = 0;
u32 driver_key = 0;
return ERR_PTR(-E2BIG);
}
+ if ((buffer_list[0].addr ^ *iova_start) & ~PAGE_MASK)
+ return ERR_PTR(-EINVAL);
+
err = nes_alloc_resource(nesadapter, nesadapter->allocated_mrs, nesadapter->max_mr,
&stag_index, &next_stag_index);
if (err) {
root_pbl_index++;
cur_pbl_index = 0;
}
- if (buffer_list[i].addr & ~PAGE_MASK) {
- /* TODO: Unwind allocated buffers */
- nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index);
- nes_debug(NES_DBG_MR, "Unaligned Memory Buffer: 0x%x\n",
- (unsigned int) buffer_list[i].addr);
- ibmr = ERR_PTR(-EINVAL);
- kfree(nesmr);
- goto reg_phys_err;
- }
- if (!buffer_list[i].size) {
+ mask = !buffer_list[i].size;
+ if (i != 0)
+ mask |= buffer_list[i].addr;
+ if (i != num_phys_buf - 1)
+ mask |= buffer_list[i].addr + buffer_list[i].size;
+
+ if (mask & ~PAGE_MASK) {
nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index);
- nes_debug(NES_DBG_MR, "Invalid Buffer Size\n");
+ nes_debug(NES_DBG_MR, "Invalid buffer addr or size\n");
ibmr = ERR_PTR(-EINVAL);
kfree(nesmr);
goto reg_phys_err;
if ((buffer_list[i-1].addr+PAGE_SIZE) != buffer_list[i].addr)
single_page = 0;
}
- vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr);
+ vpbl.pbl_vbase[cur_pbl_index].pa_low = cpu_to_le32((u32)buffer_list[i].addr & PAGE_MASK);
vpbl.pbl_vbase[cur_pbl_index++].pa_high =
cpu_to_le32((u32)((((u64)buffer_list[i].addr) >> 32)));
}
" length = 0x%016lX, index = 0x%08X\n",
stag, (unsigned long)*iova_start, (unsigned long)region_length, stag_index);
- region_length -= (*iova_start)&PAGE_MASK;
-
/* Make the leaf PBL the root if only one PBL */
if (root_pbl_index == 1) {
root_vpbl.pbl_pbase = vpbl.pbl_pbase;
struct nes_vnic *nesvnic = nesibdev->nesvnic;
nes_debug(NES_DBG_INIT, "\n");
- return sprintf(buf, "%x.%x.%x\n",
- (int)(nesvnic->nesdev->nesadapter->fw_ver >> 32),
- (int)(nesvnic->nesdev->nesadapter->fw_ver >> 16) & 0xffff,
- (int)(nesvnic->nesdev->nesadapter->fw_ver & 0xffff));
+ return sprintf(buf, "%u.%u\n",
+ (nesvnic->nesdev->nesadapter->firmware_version >> 16),
+ (nesvnic->nesdev->nesadapter->firmware_version & 0x000000ff));
}
spinlock_t lock;
u8 virtual_cq;
u8 pad[3];
+ u32 mcrqf;
};
struct nes_wq {
queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task,
round_jiffies_relative(HZ));
- set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
+ if (!test_and_set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+ napi_enable(&priv->napi);
return 0;
}
struct ipoib_tx_buf *tx_req;
int i;
- clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags);
+ if (test_and_clear_bit(IPOIB_FLAG_INITIALIZED, &priv->flags))
+ napi_disable(&priv->napi);
ipoib_cm_dev_stop(dev);
ipoib_dbg(priv, "bringing up interface\n");
- if (!test_and_set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags))
- napi_enable(&priv->napi);
+ set_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
if (ipoib_pkey_dev_delay_open(dev))
return 0;
ipoib_ib_dev_stop(dev, 1);
err_disable:
- napi_disable(&priv->napi);
clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
return -EINVAL;
ipoib_dbg(priv, "stopping interface\n");
clear_bit(IPOIB_FLAG_ADMIN_UP, &priv->flags);
- napi_disable(&priv->napi);
netif_stop_queue(dev);
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler= iscsi_eh_device_reset,
.eh_target_reset_handler= iscsi_eh_target_reset,
+ .target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "iscsi_iser",
.this_id = -1,
*/
static void ml_combine_effects(struct ff_effect *effect,
struct ml_effect_state *state,
- int gain)
+ unsigned int gain)
{
struct ff_effect *new = state->effect;
unsigned int strong, weak, i;
static struct bus_type gameport_bus;
-static void gameport_add_driver(struct gameport_driver *drv);
static void gameport_add_port(struct gameport *gameport);
-static void gameport_destroy_port(struct gameport *gameport);
+static void gameport_attach_driver(struct gameport_driver *drv);
static void gameport_reconnect_port(struct gameport *gameport);
static void gameport_disconnect_port(struct gameport *gameport);
enum gameport_event_type {
GAMEPORT_REGISTER_PORT,
- GAMEPORT_REGISTER_DRIVER,
GAMEPORT_ATTACH_DRIVER,
};
gameport_add_port(event->object);
break;
- case GAMEPORT_REGISTER_DRIVER:
- gameport_add_driver(event->object);
+ case GAMEPORT_ATTACH_DRIVER:
+ gameport_attach_driver(event->object);
break;
default:
return 0;
}
-static void gameport_add_driver(struct gameport_driver *drv)
+static void gameport_attach_driver(struct gameport_driver *drv)
{
int error;
- error = driver_register(&drv->driver);
+ error = driver_attach(&drv->driver);
if (error)
printk(KERN_ERR
- "gameport: driver_register() failed for %s, error: %d\n",
+ "gameport: driver_attach() failed for %s, error: %d\n",
drv->driver.name, error);
}
#define INPUT_DEVICES 256
+/*
+ * EV_ABS events which should not be cached are listed here.
+ */
+static unsigned int input_abs_bypass_init_data[] __initdata = {
+ ABS_MT_TOUCH_MAJOR,
+ ABS_MT_TOUCH_MINOR,
+ ABS_MT_WIDTH_MAJOR,
+ ABS_MT_WIDTH_MINOR,
+ ABS_MT_ORIENTATION,
+ ABS_MT_POSITION_X,
+ ABS_MT_POSITION_Y,
+ ABS_MT_TOOL_TYPE,
+ ABS_MT_BLOB_ID,
+ 0
+};
+static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
+
static LIST_HEAD(input_dev_list);
static LIST_HEAD(input_handler_list);
disposition = INPUT_PASS_TO_HANDLERS;
}
break;
+ case SYN_MT_REPORT:
+ dev->sync = 0;
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
}
break;
case EV_ABS:
if (is_event_supported(code, dev->absbit, ABS_MAX)) {
+ if (test_bit(code, input_abs_bypass)) {
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
+ }
+
value = input_defuzz_abs_event(value,
dev->abs[code], dev->absfuzz[code]);
return error;
list_add_tail_rcu(&handle->d_node, &dev->h_list);
mutex_unlock(&dev->mutex);
- synchronize_rcu();
/*
* Since we are supposed to be called from ->connect()
.open = input_open_file,
};
+static void __init input_init_abs_bypass(void)
+{
+ const unsigned int *p;
+
+ for (p = input_abs_bypass_init_data; *p; p++)
+ input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
+}
+
static int __init input_init(void)
{
int err;
+ input_init_abs_bypass();
+
err = class_register(&input_class);
if (err) {
printk(KERN_ERR "input: unable to register input_dev class\n");
INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
- }, /* Avoid itouchpads, touchscreens and tablets */
+ }, /* Avoid itouchpads and touchscreens */
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+ INPUT_DEVICE_ID_MATCH_KEYBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ .keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
+ }, /* Avoid tablets, digitisers and similar devices */
{ } /* Terminating entry */
};
};
/*
- * Samsung NC10 with Fn+F? key release not working
+ * Samsung NC10,NC20 with Fn+F? key release not working
*/
static unsigned int atkbd_samsung_forced_release_keys[] = {
0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U
0xb0, 0xae, -1U
};
+/*
+ * Amilo Xi 3650 key release for light touch bar not working
+ */
+static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
+ 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
+};
+
/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
.callback = atkbd_setup_forced_release,
.driver_data = atkbd_samsung_forced_release_keys,
},
+ {
+ .ident = "Samsung NC20",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC20"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
+ {
+ .ident = "Samsung SQ45S70S",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_samsung_forced_release_keys,
+ },
{
.ident = "Fujitsu Amilo PA 1510",
.matches = {
.callback = atkbd_setup_forced_release,
.driver_data = atkbd_amilo_pa1510_forced_release_keys,
},
+ {
+ .ident = "Fujitsu Amilo Xi 3650",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_amilo_xi3650_forced_release_keys,
+ },
{ }
};
}
error = request_irq(bf54x_kpad->irq, bfin_kpad_isr,
- IRQF_SAMPLE_RANDOM, DRV_NAME, pdev);
+ 0, DRV_NAME, pdev);
if (error) {
printk(KERN_ERR DRV_NAME
": unable to claim irq %d; error %d\n",
/* disable keyboard interrupt and schedule for handling */
if (cpu_is_omap24xx()) {
int i;
- for (i = 0; i < omap_kp->rows; i++)
- disable_irq(gpio_to_irq(row_gpios[i]));
+
+ for (i = 0; i < omap_kp->rows; i++) {
+ int gpio_irq = gpio_to_irq(row_gpios[i]);
+ /*
+ * The interrupt which we're currently handling should
+ * be disabled _nosync() to avoid deadlocks waiting
+ * for this handler to complete. All others should
+ * be disabled the regular way for SMP safety.
+ */
+ if (gpio_irq == irq)
+ disable_irq_nosync(gpio_irq);
+ else
+ disable_irq(gpio_irq);
+ }
} else
/* disable keyboard interrupt and schedule for handling */
omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
config HP_SDC_RTC
tristate "HP SDC Real Time Clock"
- depends on GSC || HP300
+ depends on (GSC || HP300) && SERIO
select HP_SDC
help
Say Y here if you want to support the built-in real time clock
#define ALPS_FW_BK_2 0x40
static const struct alps_model_info alps_model_data[] = {
+ { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
{ { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */
{ { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
{ { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
*/
static int atp_geyser_init(struct usb_device *udev)
{
- char data[8];
+ char *data;
int size;
int i;
+ int ret;
+
+ data = kmalloc(8, GFP_KERNEL);
+ if (!data) {
+ err("Out of memory");
+ return -ENOMEM;
+ }
size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
ATP_GEYSER_MODE_READ_REQUEST_ID,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
- ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: read error\n");
dprintk("appletouch[%d]: %d\n", i, data[i]);
err("Failed to read mode from device.");
- return -EIO;
+ ret = -EIO;
+ goto out_free;
}
/* Apply the mode switch */
ATP_GEYSER_MODE_WRITE_REQUEST_ID,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
- ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: write error\n");
dprintk("appletouch[%d]: %d\n", i, data[i]);
err("Failed to request geyser raw mode");
- return -EIO;
+ ret = -EIO;
+ goto out_free;
}
- return 0;
+ ret = 0;
+out_free:
+ kfree(data);
+ return ret;
}
/*
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231
#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232
+/* Macbook5,1 (unibody), aka wellspring3 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+ /* Macbook5,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
/* Terminating entry */
{}
};
u8 rel_y; /* relative y coordinate */
};
-/* trackpad header structure */
-struct tp_header {
- u8 unknown1[16]; /* constants, timers, etc */
- u8 fingers; /* number of fingers on trackpad */
- u8 unknown2[9]; /* constants, timers, etc */
+/* trackpad header types */
+enum tp_type {
+ TYPE1, /* plain trackpad */
+ TYPE2 /* button integrated in trackpad */
};
-/* trackpad finger structure */
+/* trackpad finger data offsets, le16-aligned */
+#define FINGER_TYPE1 (13 * sizeof(__le16))
+#define FINGER_TYPE2 (15 * sizeof(__le16))
+
+/* trackpad button data offsets */
+#define BUTTON_TYPE2 15
+
+/* list of device capability bits */
+#define HAS_INTEGRATED_BUTTON 1
+
+/* trackpad finger structure, le16-aligned */
struct tp_finger {
__le16 origin; /* zero when switching track finger */
__le16 abs_x; /* absolute x coodinate */
__le16 force_minor; /* trackpad force, minor axis? */
__le16 unused[3]; /* zeros */
__le16 multi; /* one finger: varies, more fingers: constant */
-};
+} __attribute__((packed,aligned(2)));
-/* trackpad data structure, empirically at least ten fingers */
-struct tp_data {
- struct tp_header header;
- struct tp_finger finger[16];
-};
+/* trackpad finger data size, empirically at least ten fingers */
+#define SIZEOF_FINGER sizeof(struct tp_finger)
+#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER)
/* device-specific parameters */
struct bcm5974_param {
/* device-specific configuration */
struct bcm5974_config {
int ansi, iso, jis; /* the product id of this device */
+ int caps; /* device capability bitmask */
int bt_ep; /* the endpoint of the button interface */
int bt_datalen; /* data length of the button interface */
int tp_ep; /* the endpoint of the trackpad interface */
+ enum tp_type tp_type; /* type of trackpad interface */
+ int tp_offset; /* offset to trackpad finger data */
int tp_datalen; /* data length of the trackpad interface */
struct bcm5974_param p; /* finger pressure limits */
struct bcm5974_param w; /* finger width limits */
struct urb *bt_urb; /* button usb request block */
struct bt_data *bt_data; /* button transferred data */
struct urb *tp_urb; /* trackpad usb request block */
- struct tp_data *tp_data; /* trackpad transferred data */
+ u8 *tp_data; /* trackpad transferred data */
int fingers; /* number of fingers on trackpad */
};
USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+ 0,
0x84, sizeof(struct bt_data),
- 0x81, sizeof(struct tp_data),
+ 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
{ DIM_X, DIM_X / SN_COORD, -4824, 5342 },
USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+ 0,
0x84, sizeof(struct bt_data),
- 0x81, sizeof(struct tp_data),
+ 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
{ DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING3_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING3_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4460, 5166 },
+ { DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
+ },
{}
};
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
__set_bit(BTN_LEFT, input_dev->keybit);
}
if (size != sizeof(struct bt_data))
return -EIO;
+ dprintk(7,
+ "bcm5974: button data: %x %x %x %x\n",
+ dev->bt_data->unknown1, dev->bt_data->button,
+ dev->bt_data->rel_x, dev->bt_data->rel_y);
+
input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
input_sync(dev->input);
static int report_tp_state(struct bcm5974 *dev, int size)
{
const struct bcm5974_config *c = &dev->cfg;
- const struct tp_finger *f = dev->tp_data->finger;
+ const struct tp_finger *f;
struct input_dev *input = dev->input;
- const int fingers = (size - 26) / 28;
- int raw_p, raw_w, raw_x, raw_y;
- int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+ int raw_p, raw_w, raw_x, raw_y, raw_n;
+ int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0;
int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
- if (size < 26 || (size - 26) % 28 != 0)
+ if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0)
return -EIO;
+ /* finger data, le16-aligned */
+ f = (const struct tp_finger *)(dev->tp_data + c->tp_offset);
+ raw_n = (size - c->tp_offset) / SIZEOF_FINGER;
+
/* always track the first finger; when detached, start over */
- if (fingers) {
+ if (raw_n) {
raw_p = raw2int(f->force_major);
raw_w = raw2int(f->size_major);
raw_x = raw2int(f->abs_x);
raw_y = raw2int(f->abs_y);
dprintk(9,
- "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
- raw_p, raw_w, raw_x, raw_y);
+ "bcm5974: "
+ "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+ raw_p, raw_w, raw_x, raw_y, raw_n);
ptest = int2bound(&c->p, raw_p);
origin = raw2int(f->origin);
+
+ /* set the integrated button if applicable */
+ if (c->tp_type == TYPE2)
+ ibt = raw2int(dev->tp_data[BUTTON_TYPE2]);
}
/* while tracking finger still valid, count all fingers */
abs_w = int2bound(&c->w, raw_w);
abs_x = int2bound(&c->x, raw_x - c->x.devmin);
abs_y = int2bound(&c->y, c->y.devmax - raw_y);
- for (; f != dev->tp_data->finger + fingers; f++) {
+ while (raw_n--) {
ptest = int2bound(&c->p, raw2int(f->force_major));
if (ptest > PRESSURE_LOW)
nmax++;
if (ptest > PRESSURE_HIGH)
nmin++;
+ f++;
}
}
input_report_key(input, BTN_TOUCH, dev->fingers > 0);
input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
- input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3);
+ input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3);
input_report_abs(input, ABS_PRESSURE, abs_p);
input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
dprintk(8,
"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
- "nmin: %d nmax: %d n: %d\n",
- abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+ "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w,
+ abs_x, abs_y, nmin, nmax, dev->fingers, ibt);
}
+ /* type 2 reports button events via ibt only */
+ if (c->tp_type == TYPE2)
+ input_report_key(input, BTN_LEFT, ibt);
+
input_sync(input);
return 0;
input_dev->name = "bcm5974";
input_dev->phys = dev->phys;
usb_to_input_id(dev->udev, &input_dev->id);
+ /* report driver capabilities via the version field */
+ input_dev->id.version = cfg->caps;
input_dev->dev.parent = &iface->dev;
input_set_drvdata(input_dev, dev);
/*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
*
- * Copyright (C) 2007-200
8 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-200
9 Arjan Opmeer <arjan@opmeer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int fingers;
+ static int old_fingers;
if (etd->fw_version_maj == 0x01) {
/* byte 0: D U p1 p2 1 p3 R L
fingers = (packet[0] & 0xc0) >> 6;
}
+ if (etd->jumpy_cursor) {
+ /* Discard packets that are likely to have bogus coordinates */
+ if (fingers > old_fingers) {
+ elantech_debug("elantech.c: discarding packet\n");
+ goto discard_packet_v1;
+ }
+ }
+
input_report_key(dev, BTN_TOUCH, fingers != 0);
/* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
}
input_sync(dev);
+
+ discard_packet_v1:
+ old_fingers = fingers;
}
/*
rc = -1;
break;
}
+ }
+
+ if (rc == 0) {
/*
- * Read back reg 0x10. The touchpad is probably initalising
- * and not ready until we read back the value we just wrote.
+ * Read back reg 0x10. For hardware version 1 we must make
+ * sure the absolute mode bit is set. For hardware version 2
+ * the touchpad is probably initalising and not ready until
+ * we read back the value we just wrote.
*/
do {
rc = elantech_read_reg(psmouse, 0x10, &val);
break;
tries--;
elantech_debug("elantech.c: retrying read (%d).\n",
- tries);
+ tries);
msleep(ETP_READ_BACK_DELAY);
} while (tries > 0);
- if (rc)
+
+ if (rc) {
pr_err("elantech.c: failed to read back register 0x10.\n");
- break;
+ } else if (etd->hw_version == 1 &&
+ !(val & ETP_R10_ABSOLUTE_MODE)) {
+ pr_err("elantech.c: touchpad refuses "
+ "to switch to absolute mode.\n");
+ rc = -1;
+ }
}
if (rc)
param[0], param[1], param[2]);
etd->capabilities = param[0];
+ /*
+ * This firmware seems to suffer from misreporting coordinates when
+ * a touch action starts causing the mouse cursor or scrolled page
+ * to jump. Enable a workaround.
+ */
+ if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
+ pr_info("elantech.c: firmware version 2.34 detected, "
+ "enabling jumpy cursor workaround\n");
+ etd->jumpy_cursor = 1;
+ }
+
if (elantech_set_absolute_mode(psmouse)) {
pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
goto init_fail;
/*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
*
- * Copyright (C) 2007-200
8 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-200
9 Arjan Opmeer <arjan@opmeer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
unsigned char fw_version_min;
unsigned char hw_version;
unsigned char paritycheck;
+ unsigned char jumpy_cursor;
unsigned char parity[256];
};
DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK B Series"),
},
},
+ {
+ .ident = "Lifebook B-2130",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"),
+ },
+ },
{
.ident = "Lifebook B213x/B2150",
.matches = {
* SEGA Dreamcast mouse driver
* Based on drivers/usb/usbmouse.c
*
- * Copyright Yaegashi Takeshi, 2001
- * Adrian McMenamin, 2008
+ * Copyright (c) Yaegashi Takeshi, 2001
+ * Copyright (c) Adrian McMenamin, 2008 - 2009
*/
#include <linux/kernel.h>
struct maple_device *mapledev = mq->dev;
struct dc_mouse *mse = maple_get_drvdata(mapledev);
struct input_dev *dev = mse->dev;
- unsigned char *res = mq->recvbuf;
+ unsigned char *res = mq->recvbuf->buf;
buttons = ~res[8];
relx = *(unsigned short *)(res + 12) - 512;
static int dc_mouse_open(struct input_dev *dev)
{
- struct dc_mouse *mse = dev->dev.platform_data;
+ struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
maple_getcond_callback(mse->mdev, dc_mouse_callback, HZ/50,
MAPLE_FUNC_MOUSE);
static void dc_mouse_close(struct input_dev *dev)
{
- struct dc_mouse *mse = dev->dev.platform_data;
+ struct dc_mouse *mse = maple_get_drvdata(to_maple_dev(&dev->dev));
maple_getcond_callback(mse->mdev, dc_mouse_callback, 0,
MAPLE_FUNC_MOUSE);
}
-
+/* allow the mouse to be used */
static int __devinit probe_maple_mouse(struct device *dev)
{
struct maple_device *mdev = to_maple_dev(dev);
struct maple_driver *mdrv = to_maple_driver(dev->driver);
+ int error;
struct input_dev *input_dev;
struct dc_mouse *mse;
- int error;
mse = kzalloc(sizeof(struct dc_mouse), GFP_KERNEL);
- input_dev = input_allocate_device();
-
- if (!mse || !input_dev) {
+ if (!mse) {
error = -ENOMEM;
goto fail;
}
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ error = -ENOMEM;
+ goto fail_nomem;
+ }
+
mse->dev = input_dev;
mse->mdev = mdev;
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y) |
BIT_MASK(REL_WHEEL);
- input_dev->name = mdev->product_name;
- input_dev->id.bustype = BUS_HOST;
input_dev->open = dc_mouse_open;
input_dev->close = dc_mouse_close;
+ input_dev->name = mdev->product_name;
+ input_dev->id.bustype = BUS_HOST;
+ error = input_register_device(input_dev);
+ if (error)
+ goto fail_register;
mdev->driver = mdrv;
maple_set_drvdata(mdev, mse);
- error = input_register_device(input_dev);
- if (error)
- goto fail;
-
- return 0;
+ return error;
-fail:
+fail_register:
input_free_device(input_dev);
- maple_set_drvdata(mdev, NULL);
+fail_nomem:
kfree(mse);
- mdev->driver = NULL;
+fail:
return error;
}
*/
static int __init pc110pad_init(void)
{
- struct pci_dev *dev;
int err;
if (!no_pci_devices())
MODULE_DEVICE_TABLE(parisc, hp_sdc_tbl);
static int __init hp_sdc_init_hppa(struct parisc_device *d);
+static struct delayed_work moduleloader_work;
static struct parisc_driver hp_sdc_driver = {
.name = "hp_sdc",
#if defined(__hppa__)
+static void request_module_delayed(struct work_struct *work)
+{
+ request_module("hp_sdc_mlc");
+}
+
static int __init hp_sdc_init_hppa(struct parisc_device *d)
{
+ int ret;
+
if (!d)
return 1;
if (hp_sdc.dev != NULL)
hp_sdc.data_io = d->hpa.start + 0x800;
hp_sdc.status_io = d->hpa.start + 0x801;
- return hp_sdc_init();
+ INIT_DELAYED_WORK(&moduleloader_work, request_module_delayed);
+
+ ret = hp_sdc_init();
+ /* after sucessfull initialization give SDC some time to settle
+ * and then load the hp_sdc_mlc upper layer driver */
+ if (!ret)
+ schedule_delayed_work(&moduleloader_work,
+ msecs_to_jiffies(2000));
+
+ return ret;
}
#endif /* __hppa__ */
static void hp_sdc_exit(void)
{
+ /* do nothing if we don't have a SDC */
+ if (!hp_sdc.dev)
+ return;
+
write_lock_irq(&hp_sdc.lock);
/* Turn off all maskable "sub-function" irq's. */
tasklet_kill(&hp_sdc.task);
#if defined(__hppa__)
+ cancel_delayed_work_sync(&moduleloader_work);
if (unregister_parisc_driver(&hp_sdc_driver))
printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
#endif
{ }
};
+static struct dmi_system_id __initdata i8042_dmi_reset_table[] = {
+ {
+ .ident = "MSI Wind U-100",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+ },
+ },
+ {
+ .ident = "LG Electronics X110",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "X110"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "LG Electronics Inc."),
+ },
+ },
+ { }
+};
+
#ifdef CONFIG_PNP
static struct dmi_system_id __initdata i8042_dmi_nopnp_table[] = {
{
DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
},
},
+ {
+ .ident = "MSI Wind U-100",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "U-100"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "MICRO-STAR INTERNATIONAL CO., LTD"),
+ },
+ },
{ }
};
#endif
#endif
#ifdef CONFIG_X86
+ if (dmi_check_system(i8042_dmi_reset_table))
+ i8042_reset = 1;
+
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = 1;
static int i8042_controller_selftest(void)
{
unsigned char param;
+ int i = 0;
if (!i8042_reset)
return 0;
- if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
- printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
- return -ENODEV;
- }
+ /*
+ * We try this 5 times; on some really fragile systems this does not
+ * take the first time...
+ */
+ do {
+
+ if (i8042_command(¶m, I8042_CMD_CTL_TEST)) {
+ printk(KERN_ERR "i8042.c: i8042 controller self test timeout.\n");
+ return -ENODEV;
+ }
+
+ if (param == I8042_RET_CTL_TEST)
+ return 0;
- if (param != I8042_RET_CTL_TEST) {
printk(KERN_ERR "i8042.c: i8042 controller selftest failed. (%#x != %#x)\n",
- param, I8042_RET_CTL_TEST);
- return -EIO;
- }
+ param, I8042_RET_CTL_TEST);
+ msleep(50);
+ } while (i++ < 5);
+#ifdef CONFIG_X86
+ /*
+ * On x86, we don't fail entire i8042 initialization if controller
+ * reset fails in hopes that keyboard port will still be functional
+ * and user will still get a working keyboard. This is especially
+ * important on netbooks. On other arches we trust hardware more.
+ */
+ printk(KERN_INFO
+ "i8042: giving up on controller selftest, continuing anyway...\n");
return 0;
+#else
+ return -EIO;
+#endif
}
/*
spin_lock(&ps2if->lock);
status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
if (ps2if->head == ps2if->tail) {
- disable_irq(irq);
+ disable_irq_nosync(irq);
/* done */
} else if (status & PS2STAT_TXE) {
sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
* Copyright (c) 2000 Daniel Egger <egger@suse.de>
* Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
* Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
- * Copyright (c) 2002-200
8 Ping Cheng <pingc@wacom.com>
+ * Copyright (c) 2002-200
9 Ping Cheng <pingc@wacom.com>
*
* ChangeLog:
* v0.1 (vp) - Initial release
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
* v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
+ * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28
*/
/*
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.49"
+#define DRIVER_VERSION "v1.50"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
5000); /* 5 secs */
} while (result < 0 && limit++ < 5);
+ /* No need to parse the Descriptor. It isn't an error though */
if (result < 0)
goto out;
}
}
- result = 0;
-
out:
+ result = 0;
kfree(report);
return result;
}
endpoint = &intf->cur_altsetting->endpoint[0].desc;
+ /* Initialize touch_x_max and touch_y_max in case it is not defined */
+ if (wacom_wac->features->type == TABLETPC) {
+ features->touch_x_max = 1023;
+ features->touch_y_max = 1023;
+ } else {
+ features->touch_x_max = 0;
+ features->touch_y_max = 0;
+ }
+
/* TabletPC need to retrieve the physical and logical maximum from report descriptor */
if (wacom_wac->features->type == TABLETPC) {
if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
/* Request AD7877 /DAV GPIO interrupt */
- err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING |
- IRQF_SAMPLE_RANDOM, spi->dev.driver->name, ts);
+ err = request_irq(spi->irq, ad7877_irq, IRQF_TRIGGER_FALLING,
+ spi->dev.driver->name, ts);
if (err) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
goto err_free_mem;
ad7879_setup(ts);
err = request_irq(bus->irq, ad7879_irq,
- IRQF_TRIGGER_FALLING | IRQF_SAMPLE_RANDOM,
- bus->dev.driver->name, ts);
+ IRQF_TRIGGER_FALLING, bus->dev.driver->name, ts);
if (err) {
dev_err(&bus->dev, "irq %d busy?\n", bus->irq);
void (*filter_cleanup)(void *data);
int (*get_pendown_state)(void);
int gpio_pendown;
+
+ void (*wait_for_sync)(void);
};
/* leave chip selected when we're done, for quicker re-select? */
return !gpio_get_value(ts->gpio_pendown);
}
+static void null_wait_for_sync(void)
+{
+}
+
/*
* PENIRQ only kicks the timer. The timer only reissues the SPI transfer,
* to retrieve touchscreen status.
default:
BUG();
}
+ ts->wait_for_sync();
status = spi_async(ts->spi, m);
if (status)
dev_err(&ts->spi->dev, "spi_async --> %d\n",
} else {
/* pen is still down, continue with the measurement */
ts->msg_idx = 0;
+ ts->wait_for_sync();
status = spi_async(ts->spi, &ts->msg[0]);
if (status)
dev_err(&ts->spi->dev, "spi_async --> %d\n", status);
* that here. (The "generic irq" framework may help...)
*/
ts->irq_disabled = 1;
- disable_irq(ts->spi->irq);
+ disable_irq_nosync(ts->spi->irq);
ts->pending = 1;
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
HRTIMER_MODE_REL);
ts->penirq_recheck_delay_usecs =
pdata->penirq_recheck_delay_usecs;
+ ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+
snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
input_dev->name = "ADS784x Touchscreen";
*
* Copyright (C) 2006-2008 Marvell International Ltd.
* Fengwei Yin <fengwei.yin@marvell.com>
+ * Bin Yang <bin.yang@marvell.com>
* Eric Miao <eric.miao@marvell.com>
*
* This program is free software; you can redistribute it and/or modify
goto err_reset;
touch->state = STATE_STOP;
+
+ /* FIXME: PEN_{UP/DOWN} events are expected to be
+ * available by stopping TSI, but this is found not
+ * always true, delay and simulate such an event
+ * here is more reliable
+ */
+ mdelay(1);
+ da9034_event_handler(touch,
+ is_pen_down(touch) ? EVENT_PEN_DOWN :
+ EVENT_PEN_UP);
break;
case STATE_STOP:
report_pen_up(touch);
touch->state = STATE_IDLE;
}
-
- input_sync(touch->input_dev);
break;
case STATE_WAIT:
if (is_pen_down(touch)) {
start_tsi(touch);
touch->state = STATE_BUSY;
- } else
+ } else {
+ report_pen_up(touch);
touch->state = STATE_IDLE;
+ }
break;
}
return;
struct da9034_touch *touch =
container_of(nb, struct da9034_touch, notifier);
- if (event & DA9034_EVENT_PEN_DOWN) {
- if (is_pen_down(touch))
- da9034_event_handler(touch, EVENT_PEN_DOWN);
- else
- da9034_event_handler(touch, EVENT_PEN_UP);
- }
-
if (event & DA9034_EVENT_TSI_READY)
da9034_event_handler(touch, EVENT_TSI_READY);
+ if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE)
+ da9034_event_handler(touch, EVENT_PEN_DOWN);
+
return 0;
}
module_exit(da9034_touch_exit);
MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
-MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9034-touch");
#else
static void wm97xx_acc_pen_up(struct wm97xx *wm)
{
- int count = 16;
+ unsigned int count;
+
schedule_timeout_uninterruptible(1);
- while (count < 16) {
+ for (count = 0; count < 16; count++)
MODR;
- count--;
- }
}
#endif
static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle)
{
struct tsc2007 *ts = container_of(handle, struct tsc2007, timer);
+ unsigned long flags;
- spin_lock_irq(&ts->lock);
+ spin_lock_irqsave(&ts->lock, flags);
if (unlikely(!ts->get_pendown_state() && ts->pendown)) {
struct input_dev *input = ts->input;
tsc2007_send_event(ts);
}
- spin_unlock_irq(&ts->lock);
+ spin_unlock_irqrestore(&ts->lock, flags);
return HRTIMER_NORESTART;
}
spin_lock_irqsave(&ts->lock, flags);
if (likely(ts->get_pendown_state())) {
- disable_irq(ts->irq);
+ disable_irq_nosync(ts->irq);
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
HRTIMER_MODE_REL);
}
struct ucb1400_ts *ucb = devid;
if (irqnr == ucb->irq) {
- disable_irq(ucb->irq);
+ disable_irq_nosync(ucb->irq);
ucb->irq_pending = 1;
wake_up(&ucb->ts_wait);
return IRQ_HANDLED;
* provided. */
BUG_ON(!wm->mach_ops->irq_enable);
- if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM,
+ if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
"wm97xx-pen", wm)) {
dev_err(wm->dev,
"Failed to register pen down interrupt, polling");
}
}
- kfree(s->s_options);
- s->s_options = new_opt;
+ mutex_lock(&s->s_root->d_inode->i_mutex);
+ replace_mount_options(s, new_opt);
config.setuid = setuid;
config.setgid = setgid;
config.uid = uid;
config.gid = gid;
config.mode = mode;
+ mutex_unlock(&s->s_root->d_inode->i_mutex);
+
return 0;
}
if (!inode)
return;
inode->i_ino = number+2;
+
+ dentry = get_node(number);
+
+ /* config contents is protected by root's i_mutex */
inode->i_uid = config.setuid ? config.uid : current_fsuid();
inode->i_gid = config.setgid ? config.gid : current_fsgid();
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|config.mode, device);
//inode->i_op = &capifs_file_inode_operations;
- dentry = get_node(number);
if (!IS_ERR(dentry) && !dentry->d_inode)
d_instantiate(dentry, inode);
mutex_unlock(&capifs_root->d_inode->i_mutex);
if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
/* Special case handling for pipe reset */
le16_to_cpus(&ctrl_msg->dr.wIndex);
-
- /* toggle is reset on clear */
- usb_settoggle(adapter->usb_dev,
- ctrl_msg->dr.wIndex & ~USB_DIR_IN,
- (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0,
- 0);
-
-
+ usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex);
}
if (ctrl_msg->complete)
/* segments.c: */
void setup_default_gdt_entries(struct lguest_ro_state *state);
void setup_guest_gdt(struct lg_cpu *cpu);
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num);
+void load_guest_gdt_entry(struct lg_cpu *cpu, unsigned int i,
+ u32 low, u32 hi);
void guest_load_tls(struct lg_cpu *cpu, unsigned long tls_array);
void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt);
void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt);
gdt[i] = cpu->arch.gdt[i];
}
-/*H:620 This is where the Guest asks us to load a new GDT (LHCALL_LOAD_GDT).
- * We copy it from the Guest and tweak the entries. */
-void load_guest_gdt(struct lg_cpu *cpu, unsigned long table, u32 num)
+/*H:620 This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY). We tweak the entry and copy it in. */
+void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
{
/* We assume the Guest has the same number of GDT entries as the
* Host, otherwise we'd have to dynamically allocate the Guest GDT. */
if (num > ARRAY_SIZE(cpu->arch.gdt))
kill_guest(cpu, "too many gdt entries %i", num);
- /* We read the whole thing in, then fix it up. */
- __lgread(cpu, cpu->arch.gdt, table, num * sizeof(cpu->arch.gdt[0]));
- fixup_gdt_table(cpu, 0, ARRAY_SIZE(cpu->arch.gdt));
+ /* Set it up, then fix it. */
+ cpu->arch.gdt[num].a = lo;
+ cpu->arch.gdt[num].b = hi;
+ fixup_gdt_table(cpu, num, num+1);
/* Mark that the GDT changed so the core knows it has to copy it again,
* even if the Guest is run on the same CPU. */
cpu->changed |= CHANGED_GDT;
u8 insn[3] = {0xcd, 0x1f, 0x90};
__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
+ /* The above write might have caused a copy of that page to be made
+ * (if it was read-only). We need to make sure the Guest has
+ * up-to-date pagetables. As this doesn't happen often, we can just
+ * drop them all. */
+ guest_pagetable_clear_all(cpu);
}
static bool is_hypercall(struct lg_cpu *cpu)
int lguest_arch_do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
{
switch (args->arg0) {
- case LHCALL_LOAD_GDT:
- load_guest_gdt(cpu, args->arg1, args->arg2);
+ case LHCALL_LOAD_GDT_ENTRY:
+ load_guest_gdt_entry(cpu, args->arg1, args->arg2, args->arg3);
break;
case LHCALL_LOAD_IDT_ENTRY:
load_guest_idt_entry(cpu, args->arg1, args->arg2, args->arg3);
config PMAC_MEDIABAY
bool "Support PowerBook hotswap media bay"
- depends on PPC_PMAC && PPC32
+ depends on PPC_PMAC && PPC32 && BLOCK
help
This option adds support for older PowerBook's hotswap media bay
that can contains batteries, floppy drives, or IDE devices. PCI
#include <linux/timer.h>
#include <linux/stddef.h>
#include <linux/init.h>
-#include <linux/ide.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <asm/prom.h>
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(check_media_bay_by_base);
int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base,
int irq, ide_hwif_t *hwif)
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(media_bay_set_ide_infos);
#endif /* CONFIG_BLK_DEV_IDE_PMAC */
static void media_bay_step(int i)
oldindex = index;
oldpage = page;
+ bitmap->filemap[bitmap->file_pages++] = page;
+ bitmap->last_page_size = count;
+
if (outofdate) {
/*
* if bitmap is out of date, dirty the
write_page(bitmap, page, 1);
ret = -EIO;
- if (bitmap->flags & BITMAP_WRITE_ERROR) {
- /* release, page not in filemap yet */
- put_page(page);
+ if (bitmap->flags & BITMAP_WRITE_ERROR)
goto err;
- }
}
-
- bitmap->filemap[bitmap->file_pages++] = page;
- bitmap->last_page_size = count;
}
paddr = kmap_atomic(page, KM_USER0);
if (bitmap->flags & BITMAP_HOSTENDIAN)
kunmap_atomic(paddr, KM_USER0);
if (b) {
/* if the disk bit is set, set the memory bit */
- bitmap_set_memory_bits(bitmap, i << CHUNK_BLOCK_SHIFT(bitmap),
- ((i+1) << (CHUNK_BLOCK_SHIFT(bitmap)) >= start)
- );
+ int needed = ((sector_t)(i+1) << (CHUNK_BLOCK_SHIFT(bitmap))
+ >= start);
+ bitmap_set_memory_bits(bitmap,
+ (sector_t)i << CHUNK_BLOCK_SHIFT(bitmap),
+ needed);
bit_cnt++;
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
spin_lock_irqsave(&bitmap->lock, flags);
clear_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
- bmc = bitmap_get_counter(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
- &blocks, 0);
+ bmc = bitmap_get_counter(bitmap,
+ (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
+ &blocks, 0);
if (bmc) {
/*
if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc);
} else if (*bmc == 1) {
/* we can clear the bit */
*bmc = 0;
- bitmap_count_page(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
+ bitmap_count_page(bitmap,
+ (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
-1);
/* clear the bit */
s += blocks;
}
bitmap->last_end_sync = jiffies;
+ sysfs_notify(&bitmap->mddev->kobj, NULL, "sync_completed");
}
static void bitmap_set_memory_bits(struct bitmap *bitmap, sector_t offset, int needed)
unsigned long chunk;
for (chunk = s; chunk <= e; chunk++) {
- sector_t sec = chunk << CHUNK_BLOCK_SHIFT(bitmap);
+ sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap);
bitmap_set_memory_bits(bitmap, sec, 1);
bitmap_file_set_bit(bitmap, sec);
}
int bitmap_create(mddev_t *mddev)
{
struct bitmap *bitmap;
- unsigned long blocks = mddev->resync_max_sectors;
+ sector_t blocks = mddev->resync_max_sectors;
unsigned long chunks;
unsigned long pages;
struct file *file = mddev->bitmap_file;
bitmap->chunkshift = ffz(~bitmap->chunksize);
/* now that chunksize and chunkshift are set, we can use these macros */
- chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) /
- CHUNK_BLOCK_RATIO(bitmap);
+ chunks = (blocks + CHUNK_BLOCK_RATIO(bitmap) - 1) >>
+ CHUNK_BLOCK_SHIFT(bitmap);
pages = (chunks + PAGE_COUNTER_RATIO - 1) / PAGE_COUNTER_RATIO;
BUG_ON(!pages);
+++ /dev/null
-/*
- * Copyright (C) 2004 Red Hat UK Ltd.
- *
- * This file is released under the GPL.
- */
-
-#ifndef DM_BIO_LIST_H
-#define DM_BIO_LIST_H
-
-#include <linux/bio.h>
-
-#ifdef CONFIG_BLOCK
-
-struct bio_list {
- struct bio *head;
- struct bio *tail;
-};
-
-static inline int bio_list_empty(const struct bio_list *bl)
-{
- return bl->head == NULL;
-}
-
-static inline void bio_list_init(struct bio_list *bl)
-{
- bl->head = bl->tail = NULL;
-}
-
-#define bio_list_for_each(bio, bl) \
- for (bio = (bl)->head; bio; bio = bio->bi_next)
-
-static inline unsigned bio_list_size(const struct bio_list *bl)
-{
- unsigned sz = 0;
- struct bio *bio;
-
- bio_list_for_each(bio, bl)
- sz++;
-
- return sz;
-}
-
-static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
-{
- bio->bi_next = NULL;
-
- if (bl->tail)
- bl->tail->bi_next = bio;
- else
- bl->head = bio;
-
- bl->tail = bio;
-}
-
-static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
-{
- bio->bi_next = bl->head;
-
- bl->head = bio;
-
- if (!bl->tail)
- bl->tail = bio;
-}
-
-static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
-{
- if (!bl2->head)
- return;
-
- if (bl->tail)
- bl->tail->bi_next = bl2->head;
- else
- bl->head = bl2->head;
-
- bl->tail = bl2->tail;
-}
-
-static inline void bio_list_merge_head(struct bio_list *bl,
- struct bio_list *bl2)
-{
- if (!bl2->head)
- return;
-
- if (bl->head)
- bl2->tail->bi_next = bl->head;
- else
- bl->tail = bl2->tail;
-
- bl->head = bl2->head;
-}
-
-static inline struct bio *bio_list_pop(struct bio_list *bl)
-{
- struct bio *bio = bl->head;
-
- if (bio) {
- bl->head = bl->head->bi_next;
- if (!bl->head)
- bl->tail = NULL;
-
- bio->bi_next = NULL;
- }
-
- return bio;
-}
-
-static inline struct bio *bio_list_get(struct bio_list *bl)
-{
- struct bio *bio = bl->head;
-
- bl->head = bl->tail = NULL;
-
- return bio;
-}
-
-#endif /* CONFIG_BLOCK */
-#endif
#include <linux/device-mapper.h>
-#include "dm-bio-list.h"
-
#define DM_MSG_PREFIX "delay"
struct delay_c {
#include <linux/device-mapper.h>
#include "dm-path-selector.h"
-#include "dm-bio-list.h"
#include "dm-bio-record.h"
#include "dm-uevent.h"
* This file is released under the GPL.
*/
-#include "dm-bio-list.h"
#include "dm-bio-record.h"
#include <linux/init.h>
#include <linux/vmalloc.h>
#include "dm.h"
-#include "dm-bio-list.h"
#define DM_MSG_PREFIX "region hash"
#include <linux/workqueue.h>
#include "dm-exception-store.h"
-#include "dm-bio-list.h"
#define DM_MSG_PREFIX "snapshots"
*/
#include "dm.h"
-#include "dm-bio-list.h"
#include "dm-uevent.h"
#include <linux/init.h>
clear_bit(MD_CHANGE_PENDING, &mddev->flags);
spin_unlock_irq(&mddev->write_lock);
wake_up(&mddev->sb_wait);
+ if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
* -writemostly - clears write_mostly
* blocked - sets the Blocked flag
* -blocked - clears the Blocked flag
+ * insync - sets Insync providing device isn't active
*/
int err = -EINVAL;
if (cmd_match(buf, "faulty") && rdev->mddev->pers) {
set_bit(MD_RECOVERY_NEEDED, &rdev->mddev->recovery);
md_wakeup_thread(rdev->mddev->thread);
+ err = 0;
+ } else if (cmd_match(buf, "insync") && rdev->raid_disk == -1) {
+ set_bit(In_sync, &rdev->flags);
err = 0;
}
if (!err && rdev->sysfs_state)
} else if (rdev->mddev->pers) {
mdk_rdev_t *rdev2;
/* Activating a spare .. or possibly reactivating
- * if we every get bitmaps working here.
+ * if we ever get bitmaps working here.
*/
if (rdev->raid_disk != -1)
} else
err = -EBUSY;
spin_unlock_irq(&mddev->write_lock);
- } else {
- mddev->ro = 0;
- mddev->recovery_cp = MaxSector;
- err = do_md_run(mddev);
- }
+ } else
+ err = -EINVAL;
break;
case active:
if (mddev->pers) {
{
unsigned long max_sectors, resync;
+ if (!test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
+ return sprintf(page, "none\n");
+
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
max_sectors = mddev->resync_max_sectors;
else
max_sectors = mddev->dev_sectors;
- resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active));
+ resync = mddev->curr_resync_completed;
return sprintf(page, "%lu / %lu\n", resync, max_sectors);
}
{
int err = 0;
struct gendisk *disk = mddev->gendisk;
+ mdk_rdev_t *rdev;
if (atomic_read(&mddev->openers) > is_open) {
printk("md: %s still in use.\n",mdname(mddev));
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0) {
+ char nm[20];
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ }
+
set_capacity(disk, 0);
mddev->changed = 1;
* Free resources if final stop
*/
if (mode == 0) {
- mdk_rdev_t *rdev;
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
}
mddev->bitmap_offset = 0;
- list_for_each_entry(rdev, &mddev->disks, same_set)
- if (rdev->raid_disk >= 0) {
- char nm[20];
- sprintf(nm, "rd%d", rdev->raid_disk);
- sysfs_remove_link(&mddev->kobj, nm);
- }
-
/* make sure all md_delayed_delete calls have finished */
flush_scheduled_work();
static void status_resync(struct seq_file *seq, mddev_t * mddev)
{
- sector_t max_blocks, resync, res;
- unsigned long dt, db, rt;
+ sector_t max_sectors, resync, res;
+ unsigned long dt, db;
+ sector_t rt;
int scale;
unsigned int per_milli;
- resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active))/2;
+ resync = mddev->curr_resync - atomic_read(&mddev->recovery_active);
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
- max_blocks = mddev->resync_max_sectors >> 1;
+ max_sectors = mddev->resync_max_sectors;
else
- max_blocks = mddev->dev_sectors / 2;
+ max_sectors = mddev->dev_sectors;
/*
* Should not happen.
*/
- if (!max_blocks) {
+ if (!max_sectors) {
MD_BUG();
return;
}
/* Pick 'scale' such that (resync>>scale)*1000 will fit
- * in a sector_t, and (max_blocks>>scale) will fit in a
+ * in a sector_t, and (max_sectors>>scale) will fit in a
* u32, as those are the requirements for sector_div.
* Thus 'scale' must be at least 10
*/
scale = 10;
if (sizeof(sector_t) > sizeof(unsigned long)) {
- while ( max_blocks/2 > (1ULL<<(scale+32)))
+ while ( max_sectors/2 > (1ULL<<(scale+32)))
scale++;
}
res = (resync>>scale)*1000;
- sector_div(res, (u32)((max_blocks>>scale)+1));
+ sector_div(res, (u32)((max_sectors>>scale)+1));
per_milli = res;
{
(test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ?
"resync" : "recovery"))),
per_milli/10, per_milli % 10,
- (unsigned long long) resync,
- (unsigned long long) max_blocks);
+ (unsigned long long) resync/2,
+ (unsigned long long) max_sectors/2);
/*
- * We do not want to overflow, so the order of operands and
- * the * 100 / 100 trick are important. We do a +1 to be
- * safe against division by zero. We only estimate anyway.
- *
* dt: time from mark until now
* db: blocks written from mark until now
* rt: remaining time
+ *
+ * rt is a sector_t, so could be 32bit or 64bit.
+ * So we divide before multiply in case it is 32bit and close
+ * to the limit.
+ * We scale the divisor (db) by 32 to avoid loosing precision
+ * near the end of resync when the number of remaining sectors
+ * is close to 'db'.
+ * We then divide rt by 32 after multiplying by db to compensate.
+ * The '+1' avoids division by zero if db is very small.
*/
dt = ((jiffies - mddev->resync_mark) / HZ);
if (!dt) dt++;
db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
- mddev->resync_mark_cnt;
- rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100;
- seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6);
+ rt = max_sectors - resync; /* number of remaining sectors */
+ sector_div(rt, db/32+1);
+ rt *= dt;
+ rt >>= 5;
+
+ seq_printf(seq, " finish=%lu.%lumin", (unsigned long)rt / 60,
+ ((unsigned long)rt % 60)/6);
seq_printf(seq, " speed=%ldK/sec", db/2/dt);
}
return 0;
}
-static struct seq_operations md_seq_ops = {
+static const struct seq_operations md_seq_ops = {
.start = md_seq_start,
.next = md_seq_next,
.stop = md_seq_stop,
sector_t sectors;
skipped = 0;
- if (j >= mddev->resync_max) {
- sysfs_notify(&mddev->kobj, NULL, "sync_completed");
- wait_event(mddev->recovery_wait,
- mddev->resync_max > j
- || kthread_should_stop());
- }
- if (kthread_should_stop())
- goto interrupted;
- if (mddev->curr_resync > mddev->curr_resync_completed &&
- (mddev->curr_resync - mddev->curr_resync_completed)
- > (max_sectors >> 4)) {
+ if ((mddev->curr_resync > mddev->curr_resync_completed &&
+ (mddev->curr_resync - mddev->curr_resync_completed)
+ > (max_sectors >> 4)) ||
+ (j - mddev->curr_resync_completed)*2
+ >= mddev->resync_max - mddev->curr_resync_completed
+ ) {
/* time to update curr_resync_completed */
blk_unplug(mddev->queue);
wait_event(mddev->recovery_wait,
mddev->curr_resync_completed =
mddev->curr_resync;
set_bit(MD_CHANGE_CLEAN, &mddev->flags);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
+
+ if (j >= mddev->resync_max)
+ wait_event(mddev->recovery_wait,
+ mddev->resync_max > j
+ || kthread_should_stop());
+
+ if (kthread_should_stop())
+ goto interrupted;
+
sectors = mddev->pers->sync_request(mddev, j, &skipped,
currspeed < speed_min(mddev));
if (sectors == 0) {
skip:
mddev->curr_resync = 0;
+ mddev->curr_resync_completed = 0;
mddev->resync_min = 0;
mddev->resync_max = MaxSector;
sysfs_notify(&mddev->kobj, NULL, "sync_completed");
Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef _MD_K_H
-#define _MD_K_H
-
-#ifdef CONFIG_BLOCK
+#ifndef _MD_MD_H
+#define _MD_MD_H
+
+#include <linux/blkdev.h>
+#include <linux/kobject.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/mutex.h>
+#include <linux/timer.h>
+#include <linux/wait.h>
+#include <linux/workqueue.h>
#define MaxSector (~(sector_t)0)
if (p) put_page(p);
}
-#endif /* CONFIG_BLOCK */
-#endif
-
-
extern int register_md_personality(struct mdk_personality *p);
extern int unregister_md_personality(struct mdk_personality *p);
extern mdk_thread_t * md_register_thread(void (*run) (mddev_t *mddev),
extern int md_allow_write(mddev_t *mddev);
extern void md_wait_for_blocked_rdev(mdk_rdev_t *rdev, mddev_t *mddev);
extern void md_set_array_sectors(mddev_t *mddev, sector_t array_sectors);
+
+#endif /* _MD_MD_H */
#include <linux/blkdev.h>
#include <linux/seq_file.h>
#include "md.h"
-#include "dm-bio-list.h"
#include "raid1.h"
#include "bitmap.h"
#include <linux/blkdev.h>
#include <linux/seq_file.h>
#include "md.h"
-#include "dm-bio-list.h"
#include "raid10.h"
#include "bitmap.h"
r10_bio->sector = sect;
raid10_find_phys(conf, r10_bio);
- /* Need to check if this section will still be
+
+ /* Need to check if the array will still be
* degraded
*/
- for (j=0; j<conf->copies;j++) {
- int d = r10_bio->devs[j].devnum;
- if (conf->mirrors[d].rdev == NULL ||
- test_bit(Faulty, &conf->mirrors[d].rdev->flags)) {
+ for (j=0; j<conf->raid_disks; j++)
+ if (conf->mirrors[j].rdev == NULL ||
+ test_bit(Faulty, &conf->mirrors[j].rdev->flags)) {
still_degraded = 1;
break;
}
- }
+
must_sync = bitmap_start_sync(mddev->bitmap, sect,
&sync_blocks, still_degraded);
wait_event(conf->wait_for_overlap,
atomic_read(&conf->reshape_stripes)==0);
mddev->reshape_position = conf->reshape_progress;
+ mddev->curr_resync_completed = mddev->curr_resync;
conf->reshape_checkpoint = jiffies;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
md_wakeup_thread(mddev->thread);
conf->reshape_safe = mddev->reshape_position;
spin_unlock_irq(&conf->device_lock);
wake_up(&conf->wait_for_overlap);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
if (mddev->delta_disks < 0) {
* then we need to write out the superblock.
*/
sector_nr += reshape_sectors;
- if (sector_nr >= mddev->resync_max) {
+ if ((sector_nr - mddev->curr_resync_completed) * 2
+ >= mddev->resync_max - mddev->curr_resync_completed) {
/* Cannot proceed until we've updated the superblock... */
wait_event(conf->wait_for_overlap,
atomic_read(&conf->reshape_stripes) == 0);
mddev->reshape_position = conf->reshape_progress;
+ mddev->curr_resync_completed = mddev->curr_resync;
conf->reshape_checkpoint = jiffies;
set_bit(MD_CHANGE_DEVS, &mddev->flags);
md_wakeup_thread(mddev->thread);
conf->reshape_safe = mddev->reshape_position;
spin_unlock_irq(&conf->device_lock);
wake_up(&conf->wait_for_overlap);
+ sysfs_notify(&mddev->kobj, NULL, "sync_completed");
}
return reshape_sectors;
}
mult = (fmi->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
v->rangelow = RSF16_MINFREQ / mult;
v->rangehigh = RSF16_MAXFREQ / mult;
- v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
v->capability = fmi->flags & V4L2_TUNER_CAP_LOW;
v->audmode = V4L2_TUNER_MODE_STEREO;
v->signal = fmi_getsigstr(fmi);
mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
v->rangelow = RSF16_MINFREQ / mult;
v->rangehigh = RSF16_MAXFREQ / mult;
- v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW;
v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO:
V4L2_TUNER_MODE_MONO;
video_unregister_device(radio->videodev);
kfree(radio->buffer);
kfree(radio);
- goto unlock;
+ goto done;
}
/* stop rds reception */
dev->usbdev = usbdev;
dev->boardnr = id->driver_info;
- usb_set_intfdata(interface, dev);
-
/* Create the v4l2_device */
retval = v4l2_device_register(&interface->dev, &dev->v4l2_dev);
if (retval) {
/* Digital TV */
au0828_dvb_register(dev);
+ /* Store the pointer to the au0828_dev so it can be accessed in
+ au0828_usb_disconnect */
+ usb_set_intfdata(interface, dev);
+
printk(KERN_INFO "Registered device AU0828 [%s]\n",
dev->board.name == NULL ? "Unset" : dev->board.name);
ret = __cafe_cam_reset(cam);
if (ret)
goto out;
+ chip.ident = V4L2_IDENT_NONE;
chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
chip.match.addr = cam->sensor_addr;
ret = sensor_call(cam, core, g_chip_ident, &chip);
/* handle muxer chips */
v4l2_subdev_call(cx->sd_extmux, audio, s_routing,
- in->audio_input, 0, 0);
+ (u32) in->muxer_input, 0, 0);
err = cx18_call_hw_err(cx, cx->card->hw_audio_ctrl,
audio, s_routing, in->audio_input, 0, 0);
/* init + register i2c algo-bit adapter */
int init_cx18_i2c(struct cx18 *cx)
{
- int i;
+ int i, err;
CX18_DEBUG_I2C("i2c init\n");
for (i = 0; i < 2; i++) {
cx18_call_hw(cx, CX18_HW_GPIO_RESET_CTRL,
core, reset, (u32) CX18_GPIO_RESET_I2C);
- return i2c_bit_add_bus(&cx->i2c_adap[0]) ||
- i2c_bit_add_bus(&cx->i2c_adap[1]);
+ err = i2c_bit_add_bus(&cx->i2c_adap[0]);
+ if (err)
+ goto err;
+ err = i2c_bit_add_bus(&cx->i2c_adap[1]);
+ if (err)
+ goto err_del_bus_0;
+ return 0;
+
+ err_del_bus_0:
+ i2c_del_adapter(&cx->i2c_adap[0]);
+ err:
+ return err;
}
void exit_cx18_i2c(struct cx18 *cx)
config VIDEO_CX231XX
- tristate "Conexant cx231xx USB video capture support"
- depends on VIDEO_DEV && I2C && INPUT
- select VIDEO_TUNER
- select VIDEO_TVEEPROM
- select VIDEO_IR
- select VIDEOBUF_VMALLOC
- select VIDEO_CX25840
- select VIDEO_CX231XX_ALSA
+ tristate "Conexant cx231xx USB video capture support"
+ depends on VIDEO_DEV && I2C && INPUT
+ select VIDEO_TUNER
+ select VIDEO_TVEEPROM
+ select VIDEO_IR
+ select VIDEOBUF_VMALLOC
+ select VIDEO_CX25840
---help---
This is a video4linux driver for Conexant 231xx USB based TV cards.
module will be called cx231xx
config VIDEO_CX231XX_ALSA
- tristate "Conexant Cx231xx ALSA audio module"
- depends on VIDEO_CX231XX && SND
- select SND_PCM
+ tristate "Conexant Cx231xx ALSA audio module"
+ depends on VIDEO_CX231XX && SND
+ select SND_PCM
- ---help---
- This is an ALSA driver for Cx231xx USB based TV cards.
+ ---help---
+ This is an ALSA driver for Cx231xx USB based TV cards.
- To compile this driver as a module, choose M here: the
- module will be called cx231xx-alsa
+ To compile this driver as a module, choose M here: the
+ module will be called cx231xx-alsa
config VIDEO_CX231XX_DVB
- tristate "DVB/ATSC Support for Cx231xx based TV cards"
- depends on VIDEO_CX231XX && DVB_CORE
- select VIDEOBUF_DVB
- select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
- ---help---
- This adds support for DVB cards based on the
- Conexant cx231xx chips.
+ tristate "DVB/ATSC Support for Cx231xx based TV cards"
+ depends on VIDEO_CX231XX && DVB_CORE
+ select VIDEOBUF_DVB
+ select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMISE
+
+ ---help---
+ This adds support for DVB cards based on the
+ Conexant cx231xx chips.
case CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP:
/* Two identical tuners on two different i2c buses,
* we need to reset the correct gpio. */
- if (port->nr == 0)
+ if (port->nr == 1)
bitmask = 0x01;
- else if (port->nr == 1)
+ else if (port->nr == 2)
bitmask = 0x04;
break;
}
.demod_address = 0x0f,
.if2 = 45600,
.no_tuner = 1,
+ .disable_i2c_gate_ctrl = 1,
};
static struct stv0900_config netup_stv0900_config = {
static struct xc2028_ctrl ctl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
- .scode_table = XC3028_FE_OREN538,
+ .demod = XC3028_FE_OREN538,
};
fe = dvb_attach(xc2028_attach,
/* Generic utility functions */
int ivtv_msleep_timeout(unsigned int msecs, int intr)
{
- int ret;
int timeout = msecs_to_jiffies(msecs);
do {
set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
timeout = schedule_timeout(timeout);
- if (intr && (ret = signal_pending(current)))
- return ret;
+ if (intr) {
+ int ret = signal_pending(current);
+
+ if (ret)
+ return ret;
+ }
} while (timeout);
return 0;
}
mask = itv->card->gpio_audio_detect.mask;
if (mask == 0 || (read_reg(IVTV_REG_GPIO_IN) & mask))
- vt->rxsubchans = V4L2_TUNER_MODE_STEREO |
- V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2;
+ vt->rxsubchans = V4L2_TUNER_SUB_STEREO |
+ V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
else
vt->rxsubchans = V4L2_TUNER_SUB_MONO;
return 0;
/* Wait for any DMA to finish */
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
- while (itv->i_flags & IVTV_F_I_DMA) {
+ while (test_bit(IVTV_F_I_DMA, &itv->i_flags)) {
got_sig = signal_pending(current);
if (got_sig)
break;
we are waiting unlock first and later lock again. */
mutex_unlock(&itv->serialize_lock);
prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE);
- if ((itv->i_flags & (IVTV_F_I_EV_DEC_STOPPED|IVTV_F_I_EV_VSYNC)) == 0)
+ if (!test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags) &&
+ !test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags))
schedule();
finish_wait(&itv->event_waitq, &wait);
mutex_lock(&itv->serialize_lock);
bytes_needed, s->name);
return -1;
}
- if (rc && !s->buffers_stolen && (s->s_flags & IVTV_F_S_APPL_IO)) {
+ if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) {
IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name);
IVTV_WARN("Cause: the application is not reading fast enough.\n");
}
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
/* if no UDMA is pending and no UDMA is in progress, then the DMA
is finished */
- while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+ while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+ test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
/* don't interrupt if the DMA is in progress but break off
a still pending DMA. */
got_sig = signal_pending(current);
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
/* if no UDMA is pending and no UDMA is in progress, then the DMA
is finished */
- while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+ while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+ test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
/* don't interrupt if the DMA is in progress but break off
a still pending DMA. */
got_sig = signal_pending(current);
.owner = THIS_MODULE,
.add = mx3_camera_add_device,
.remove = mx3_camera_remove_device,
-#ifdef CONFIG_PM
- .suspend = mx3_camera_suspend,
- .resume = mx3_camera_resume,
-#endif
.set_crop = mx3_camera_set_crop,
.set_fmt = mx3_camera_set_fmt,
.try_fmt = mx3_camera_try_fmt,
return ret;
}
- usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0);
usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
/****************************************************************************/
+static int _send_control_msg(struct pwc_device *pdev,
+ u8 request, u16 value, int index, void *buf, int buflen, int timeout)
+{
+ int rc;
+ void *kbuf = NULL;
+
+ if (buflen) {
+ kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+ if (kbuf == NULL)
+ return -ENOMEM;
+ memcpy(kbuf, buf, buflen);
+ }
-#define SendControlMsg(request, value, buflen) \
- usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0), \
- request, \
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
- value, \
- pdev->vcinterface, \
- &buf, buflen, 500)
+ rc = usb_control_msg(pdev->udev, usb_sndctrlpipe(pdev->udev, 0),
+ request,
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ index,
+ kbuf, buflen, timeout);
-#define RecvControlMsg(request, value, buflen) \
- usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0), \
- request, \
- USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, \
- value, \
- pdev->vcinterface, \
- &buf, buflen, 500)
+ kfree(kbuf);
+ return rc;
+}
+static int recv_control_msg(struct pwc_device *pdev,
+ u8 request, u16 value, void *buf, int buflen)
+{
+ int rc;
+ void *kbuf = kmalloc(buflen, GFP_KERNEL); /* not allowed on stack */
+
+ if (kbuf == NULL)
+ return -ENOMEM;
+
+ rc = usb_control_msg(pdev->udev, usb_rcvctrlpipe(pdev->udev, 0),
+ request,
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ value,
+ pdev->vcinterface,
+ kbuf, buflen, 500);
+ memcpy(buf, kbuf, buflen);
+ kfree(kbuf);
+ return rc;
+}
-static int send_video_command(struct usb_device *udev, int index, void *buf, int buflen)
+static inline int send_video_command(struct pwc_device *pdev,
+ int index, void *buf, int buflen)
{
- return usb_control_msg(udev,
- usb_sndctrlpipe(udev, 0),
+ return _send_control_msg(pdev,
SET_EP_STREAM_CTL,
- USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
VIDEO_OUTPUT_CONTROL_FORMATTER,
index,
buf, buflen, 1000);
}
+static inline int send_control_msg(struct pwc_device *pdev,
+ u8 request, u16 value, void *buf, int buflen)
+{
+ return _send_control_msg(pdev,
+ request, value, pdev->vcinterface, buf, buflen, 500);
+}
+
static int set_video_mode_Nala(struct pwc_device *pdev, int size, int frames)
return -EINVAL;
memcpy(buf, pEntry->mode, 3);
- ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 3);
+ ret = send_video_command(pdev, pdev->vendpoint, buf, 3);
if (ret < 0) {
PWC_DEBUG_MODULE("Failed to send video command... %d\n", ret);
return ret;
memcpy(buf, pChoose->mode, 13);
if (snapshot)
buf[0] |= 0x80;
- ret = send_video_command(pdev->udev, pdev->vendpoint, buf, 13);
+ ret = send_video_command(pdev, pdev->vendpoint, buf, 13);
if (ret < 0)
return ret;
buf[0] |= 0x80;
/* Firmware bug: video endpoint is 5, but commands are sent to endpoint 4 */
- ret = send_video_command(pdev->udev, 4 /* pdev->vendpoint */, buf, 12);
+ ret = send_video_command(pdev, 4 /* pdev->vendpoint */, buf, 12);
if (ret < 0)
return ret;
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return buf;
if (value > 0xffff)
value = 0xffff;
buf = (value >> 9) & 0x7f;
- return SendControlMsg(SET_LUM_CTL, BRIGHTNESS_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, BRIGHTNESS_FORMATTER, &buf, sizeof(buf));
}
/* CONTRAST */
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, CONTRAST_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return buf;
if (value > 0xffff)
value = 0xffff;
buf = (value >> 10) & 0x3f;
- return SendControlMsg(SET_LUM_CTL, CONTRAST_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, CONTRAST_FORMATTER, &buf, sizeof(buf));
}
/* GAMMA */
char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, GAMMA_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return buf;
if (value > 0xffff)
value = 0xffff;
buf = (value >> 11) & 0x1f;
- return SendControlMsg(SET_LUM_CTL, GAMMA_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, GAMMA_FORMATTER, &buf, sizeof(buf));
}
saturation_register = SATURATION_MODE_FORMATTER2;
else
saturation_register = SATURATION_MODE_FORMATTER1;
- ret = RecvControlMsg(GET_CHROM_CTL, saturation_register, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = (signed)buf;
saturation_register = SATURATION_MODE_FORMATTER2;
else
saturation_register = SATURATION_MODE_FORMATTER1;
- return SendControlMsg(SET_CHROM_CTL, saturation_register, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, saturation_register, &buf, sizeof(buf));
}
/* AGC */
else
buf = 0xff; /* fixed */
- ret = SendControlMsg(SET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
if (!mode && ret >= 0) {
if (value < 0)
if (value > 0xffff)
value = 0xffff;
buf = (value >> 10) & 0x3F;
- ret = SendControlMsg(SET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
}
if (ret < 0)
return ret;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, AGC_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, AGC_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (buf != 0) { /* fixed */
- ret = RecvControlMsg(GET_LUM_CTL, PRESET_AGC_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, PRESET_AGC_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (buf > 0x3F)
*value = (buf << 10);
}
else { /* auto */
- ret = RecvControlMsg(GET_STATUS_CTL, READ_AGC_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_AGC_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
/* Gah... this value ranges from 0x00 ... 0x9F */
else
buf[0] = 0xff; /* fixed */
- ret = SendControlMsg(SET_LUM_CTL, SHUTTER_MODE_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, SHUTTER_MODE_FORMATTER, &buf, sizeof(buf));
if (!mode && ret >= 0) {
if (value < 0)
buf[0] = value >> 8;
}
- ret = SendControlMsg(SET_LUM_CTL, PRESET_SHUTTER_FORMATTER, 2);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, PRESET_SHUTTER_FORMATTER,
+ &buf, sizeof(buf));
}
return ret;
}
unsigned char buf[2];
int ret;
- ret = RecvControlMsg(GET_STATUS_CTL, READ_SHUTTER_FORMATTER, 2);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_SHUTTER_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf[0] + (buf[1] << 8);
buf = 0x00; /* active */
else
buf = 0xFF; /* power save */
- return SendControlMsg(SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, SET_POWER_SAVE_MODE_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_restore_user(struct pwc_device *pdev)
{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, 0);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, RESTORE_USER_DEFAULTS_FORMATTER, NULL, 0);
}
int pwc_save_user(struct pwc_device *pdev)
{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, 0);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, SAVE_USER_DEFAULTS_FORMATTER, NULL, 0);
}
int pwc_restore_factory(struct pwc_device *pdev)
{
- char buf; /* dummy */
- return SendControlMsg(SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, 0);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, RESTORE_FACTORY_DEFAULTS_FORMATTER, NULL, 0);
}
/* ************************************************* */
buf = mode & 0x07; /* just the lowest three bits */
- ret = SendControlMsg(SET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, WB_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, WB_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
value = 0xffff;
/* only the msb is considered */
buf = value >> 8;
- return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_red_gain(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, PRESET_MANUAL_RED_GAIN_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
value = 0xffff;
/* only the msb is considered */
buf = value >> 8;
- return SendControlMsg(SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_blue_gain(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, PRESET_MANUAL_BLUE_GAIN_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_RED_GAIN_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, READ_BLUE_GAIN_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 8;
/* useful range is 0x01..0x20 */
buf = speed / 0x7f0;
- return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
}
static int pwc_get_wb_speed(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, AWB_CONTROL_SPEED_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf * 0x7f0;
/* useful range is 0x01..0x3F */
buf = (delay >> 10);
- return SendControlMsg(SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
}
static int pwc_get_wb_delay(struct pwc_device *pdev, int *value)
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, AWB_CONTROL_DELAY_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*value = buf << 10;
buf[0] = on_value;
buf[1] = off_value;
- return SendControlMsg(SET_STATUS_CTL, LED_FORMATTER, 2);
+ return send_control_msg(pdev,
+ SET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
}
static int pwc_get_leds(struct pwc_device *pdev, int *on_value, int *off_value)
return 0;
}
- ret = RecvControlMsg(GET_STATUS_CTL, LED_FORMATTER, 2);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, LED_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*on_value = buf[0] * 100;
buf = 0xff; /* auto contour on */
else
buf = 0x0; /* auto contour off */
- ret = SendControlMsg(SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
contour = 0xffff;
buf = (contour >> 10); /* contour preset is [0..3f] */
- ret = SendControlMsg(SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+ ret = send_control_msg(pdev,
+ SET_LUM_CTL, PRESET_CONTOUR_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
return 0;
unsigned char buf;
int ret;
- ret = RecvControlMsg(GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, AUTO_CONTOUR_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (buf == 0) {
/* auto mode off, query current preset value */
- ret = RecvControlMsg(GET_LUM_CTL, PRESET_CONTOUR_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, PRESET_CONTOUR_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*contour = buf << 10;
buf = 0xff;
else
buf = 0x0;
- return SendControlMsg(SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_backlight(struct pwc_device *pdev, int *backlight)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, BACK_LIGHT_COMPENSATION_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*backlight = !!buf;
buf = 0xff;
else
buf = 0x0;
- return SendControlMsg(SET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
}
int pwc_get_colour_mode(struct pwc_device *pdev, int *colour)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_CHROM_CTL, COLOUR_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_CHROM_CTL, COLOUR_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*colour = !!buf;
buf = 0xff;
else
buf = 0x0;
- return SendControlMsg(SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
}
int pwc_get_flicker(struct pwc_device *pdev, int *flicker)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, FLICKERLESS_MODE_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
*flicker = !!buf;
if (noise > 3)
noise = 3;
buf = noise;
- return SendControlMsg(SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+ &buf, sizeof(buf));
}
int pwc_get_dynamic_noise(struct pwc_device *pdev, int *noise)
int ret;
unsigned char buf;
- ret = RecvControlMsg(GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER, 1);
+ ret = recv_control_msg(pdev,
+ GET_LUM_CTL, DYNAMIC_NOISE_CONTROL_FORMATTER,
+ &buf, sizeof(buf));
if (ret < 0)
return ret;
*noise = buf;
unsigned char buf;
buf = flags & 0x03; // only lower two bits are currently used
- return SendControlMsg(SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, 1);
+ return send_control_msg(pdev,
+ SET_MPT_CTL, PT_RESET_CONTROL_FORMATTER, &buf, sizeof(buf));
}
int pwc_mpt_reset(struct pwc_device *pdev, int flags)
buf[1] = (pan >> 8) & 0xFF;
buf[2] = tilt & 0xFF;
buf[3] = (tilt >> 8) & 0xFF;
- return SendControlMsg(SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, 4);
+ return send_control_msg(pdev,
+ SET_MPT_CTL, PT_RELATIVE_CONTROL_FORMATTER, &buf, sizeof(buf));
}
int pwc_mpt_set_angle(struct pwc_device *pdev, int pan, int tilt)
int ret;
unsigned char buf[5];
- ret = RecvControlMsg(GET_MPT_CTL, PT_STATUS_FORMATTER, 5);
+ ret = recv_control_msg(pdev,
+ GET_MPT_CTL, PT_STATUS_FORMATTER, &buf, sizeof(buf));
if (ret < 0)
return ret;
status->status = buf[0] & 0x7; // 3 bits are used for reporting
else
request = SENSOR_TYPE_FORMATTER2;
- ret = RecvControlMsg(GET_STATUS_CTL, request, 1);
+ ret = recv_control_msg(pdev,
+ GET_STATUS_CTL, request, &buf, sizeof(buf));
if (ret < 0)
return ret;
if (pdev->type < 675)
buffer[1] = (u32) chn_rev;
buffer[2] = CMD_SET_MODE;
memcpy(&buffer[3], &dev->mode[chn], sizeof(struct s2255_mode));
+ dev->setmode_ready[chn] = 0;
res = s2255_write_config(dev->udev, (unsigned char *)buffer, 512);
if (debug)
dump_verify_mode(dev, mode);
/* wait at least 3 frames before continuing */
if (mode->restart) {
- dev->setmode_ready[chn] = 0;
wait_event_timeout(dev->wait_setmode[chn],
(dev->setmode_ready[chn] != 0),
msecs_to_jiffies(S2255_SETMODE_TIMEOUT));
/* Register it */
err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
if (err < 0) {
- kfree(t);
video_device_release(t->vdev);
- t->vdev = NULL;
+ kfree(t);
return err;
}
return 0;
/* Now create a video4linux device */
t->vdev = video_device_alloc();
if (t->vdev == NULL) {
+ kfree(t);
kfree(client);
return -ENOMEM;
}
/* Register it */
err = video_register_device(t->vdev, VFL_TYPE_VTX, -1);
if (err < 0) {
- kfree(t);
video_device_release(t->vdev);
- t->vdev = NULL;
+ kfree(t);
return err;
}
return 0;
static int __uvc_resume(struct usb_interface *intf, int reset)
{
struct uvc_device *dev = usb_get_intfdata(intf);
- int ret;
uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n",
intf->cur_altsetting->desc.bInterfaceNumber);
if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) {
- if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0)
- return ret;
+ if (reset) {
+ int ret = uvc_ctrl_resume_device(dev);
+
+ if (ret < 0)
+ return ret;
+ }
return uvc_status_resume(dev);
}
/* Buffers are already allocated, bail out. */
if (video->urb_size)
- return 0;
+ return video->urb_size / psize;
/* Compute the number of packets. Bulk endpoints might transfer UVC
* payloads accross multiple URBs.
printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\
} while (0)
+/* Zero out the end of the struct pointed to by p. Everthing after, but
+ * not including, the specified field is cleared. */
+#define CLEAR_AFTER_FIELD(p, field) \
+ memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \
+ 0, sizeof(*(p)) - offsetof(typeof(*(p)), field) - sizeof((p)->field))
+
struct std_descr {
v4l2_std_id std;
const char *descr;
switch (type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- if (ops->vidioc_try_fmt_vid_cap)
+ if (ops->vidioc_g_fmt_vid_cap)
return 0;
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
- if (ops->vidioc_try_fmt_vid_overlay)
+ if (ops->vidioc_g_fmt_vid_overlay)
return 0;
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
- if (ops->vidioc_try_fmt_vid_out)
+ if (ops->vidioc_g_fmt_vid_out)
return 0;
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
- if (ops->vidioc_try_fmt_vid_out_overlay)
+ if (ops->vidioc_g_fmt_vid_out_overlay)
return 0;
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
- if (ops->vidioc_try_fmt_vbi_cap)
+ if (ops->vidioc_g_fmt_vbi_cap)
return 0;
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
- if (ops->vidioc_try_fmt_vbi_out)
+ if (ops->vidioc_g_fmt_vbi_out)
return 0;
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
- if (ops->vidioc_try_fmt_sliced_vbi_cap)
+ if (ops->vidioc_g_fmt_sliced_vbi_cap)
return 0;
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
- if (ops->vidioc_try_fmt_sliced_vbi_out)
+ if (ops->vidioc_g_fmt_sliced_vbi_out)
return 0;
break;
case V4L2_BUF_TYPE_PRIVATE:
- if (ops->vidioc_try_fmt_type_private)
+ if (ops->vidioc_g_fmt_type_private)
return 0;
break;
}
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
v4l_print_pix_fmt(vfd, &f->fmt.pix);
if (ops->vidioc_s_fmt_vid_cap)
ret = ops->vidioc_s_fmt_vid_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_s_fmt_vid_overlay)
ret = ops->vidioc_s_fmt_vid_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
v4l_print_pix_fmt(vfd, &f->fmt.pix);
if (ops->vidioc_s_fmt_vid_out)
ret = ops->vidioc_s_fmt_vid_out(file, fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_s_fmt_vid_out_overlay)
ret = ops->vidioc_s_fmt_vid_out_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_s_fmt_vbi_cap)
ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_s_fmt_vbi_out)
ret = ops->vidioc_s_fmt_vbi_out(file, fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_s_fmt_sliced_vbi_cap)
ret = ops->vidioc_s_fmt_sliced_vbi_cap(file,
fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_s_fmt_sliced_vbi_out)
ret = ops->vidioc_s_fmt_sliced_vbi_out(file,
fh, f);
break;
case V4L2_BUF_TYPE_PRIVATE:
+ /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
if (ops->vidioc_s_fmt_type_private)
ret = ops->vidioc_s_fmt_type_private(file,
fh, f);
v4l2_type_names));
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
if (ops->vidioc_try_fmt_vid_cap)
ret = ops->vidioc_try_fmt_vid_cap(file, fh, f);
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_try_fmt_vid_overlay)
ret = ops->vidioc_try_fmt_vid_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
if (ops->vidioc_try_fmt_vid_out)
ret = ops->vidioc_try_fmt_vid_out(file, fh, f);
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_try_fmt_vid_out_overlay)
ret = ops->vidioc_try_fmt_vid_out_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_try_fmt_vbi_cap)
ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_try_fmt_vbi_out)
ret = ops->vidioc_try_fmt_vbi_out(file, fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_try_fmt_sliced_vbi_cap)
ret = ops->vidioc_try_fmt_sliced_vbi_cap(file,
fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_try_fmt_sliced_vbi_out)
ret = ops->vidioc_try_fmt_sliced_vbi_out(file,
fh, f);
break;
case V4L2_BUF_TYPE_PRIVATE:
+ /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
if (ops->vidioc_try_fmt_type_private)
ret = ops->vidioc_try_fmt_type_private(file,
fh, f);
if (ret)
break;
+ if (p->type < V4L2_BUF_TYPE_PRIVATE)
+ CLEAR_AFTER_FIELD(p, memory);
+
ret = ops->vidioc_reqbufs(file, fh, p);
dbgarg(cmd, "count=%d, type=%s, memory=%s\n",
p->count,
static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)
{
- int num = -1, i;
-
- for (i = 0; i < NUM_FORMATS; i++) {
- if (zoran_formats[i].flags & flag)
- num++;
- if (num == fmt->index)
- break;
+ unsigned int num, i;
+
+ for (num = i = 0; i < NUM_FORMATS; i++) {
+ if (zoran_formats[i].flags & flag && num++ == fmt->index) {
+ strncpy(fmt->description, zoran_formats[i].name,
+ sizeof(fmt->description) - 1);
+ /* fmt struct pre-zeroed, so adding '\0' not neeed */
+ fmt->pixelformat = zoran_formats[i].fourcc;
+ if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
+ fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
+ return 0;
+ }
}
- if (fmt->index < 0 /* late, but not too late */ || i == NUM_FORMATS)
- return -EINVAL;
-
- strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1);
- fmt->pixelformat = zoran_formats[i].fourcc;
- if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
- fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
- return 0;
+ return -EINVAL;
}
static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh,
/* Initalize the timer
*/
- init_timer(&pCfg->timer);
+ init_timer_on_stack(&pCfg->timer);
pCfg->timer.data = (unsigned long) ioc;
pCfg->timer.function = mpt_timer_expired;
pCfg->wait_done = 0;
* We only use page mode writes; the alternative is sloooow. This routine
* writes at most one page.
*/
-static ssize_t at24_eeprom_write(struct at24_data *at24, char *buf,
+static ssize_t at24_eeprom_write(struct at24_data *at24, const char *buf,
unsigned offset, size_t count)
{
struct i2c_client *client;
return -ETIMEDOUT;
}
-static ssize_t at24_write(struct at24_data *at24,
- char *buf, loff_t off, size_t count)
+static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off,
+ size_t count)
{
ssize_t retval = 0;
return at24_read(at24, buf, offset, count);
}
-static ssize_t at24_macc_write(struct memory_accessor *macc, char *buf,
+static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf,
off_t offset, size_t count)
{
struct at24_data *at24 = container_of(macc, struct at24_data, macc);
static ssize_t
-at25_ee_write(struct at25_data *at25, char *buf, loff_t off, size_t count)
+at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
+ size_t count)
{
ssize_t status = 0;
unsigned written = 0;
return at25_ee_read(at25, buf, offset, count);
}
-static ssize_t at25_mem_write(struct memory_accessor *mem, char *buf,
+static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf,
off_t offset, size_t count)
{
struct at25_data *at25 = container_of(mem, struct at25_data, mem);
struct i2c_client *client;
struct mutex lock;
u8 reg_cache[ISL29003_NUM_CACHABLE_REGS];
+ u8 power_state_before_suspend;
};
static int gain_range[] = {
#ifdef CONFIG_PM
static int isl29003_suspend(struct i2c_client *client, pm_message_t mesg)
{
+ struct isl29003_data *data = i2c_get_clientdata(client);
+
+ data->power_state_before_suspend = isl29003_get_power_state(client);
return isl29003_set_power_state(client, 0);
}
/* restore registers from cache */
for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++)
- if (!i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
+ if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
return -EIO;
- return 0;
+ return isl29003_set_power_state(client,
+ data->power_state_before_suspend);
}
#else
void *gru_start_vaddr;
if (!is_uv_system())
- return -ENODEV;
+ return 0;
#if defined CONFIG_IA64
gru_start_paddr = 0xd000000000UL; /* ZZZZZZZZZZZZZZZZZZZ fixme */
enum xp_retval ret;
int ch_number;
+ /* initialize the connection registration mutex */
+ for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
+ mutex_init(&xpc_registrations[ch_number].mutex);
+
if (is_shub())
ret = xp_init_sn2();
else if (is_uv())
ret = xp_init_uv();
else
- ret = xpUnsupported;
+ ret = 0;
if (ret != xpSuccess)
- return -ENODEV;
-
- /* initialize the connection registration mutex */
- for (ch_number = 0; ch_number < XPC_MAX_NCHANNELS; ch_number++)
- mutex_init(&xpc_registrations[ch_number].mutex);
+ return ret;
return 0;
}
short max_npartitions; /* value of XPC_MAX_PARTITIONS */
u8 version;
u8 pad1[3]; /* align to next u64 in 1st 64-byte cacheline */
+ unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
union {
- unsigned long vars_pa; /* phys address of struct xpc_vars */
- unsigned long activate_gru_mq_desc_gpa; /* phys addr of */
- /* activate mq's */
- /* gru mq descriptor */
+ struct {
+ unsigned long vars_pa; /* phys addr */
+ } sn2;
+ struct {
+ unsigned long heartbeat_gpa; /* phys addr */
+ unsigned long activate_gru_mq_desc_gpa; /* phys addr */
+ } uv;
} sn;
- unsigned long ts_jiffies; /* timestamp when rsvd pg was setup by XPC */
- u64 pad2[10]; /* align to last u64 in 2nd 64-byte cacheline */
+ u64 pad2[9]; /* align to last u64 in 2nd 64-byte cacheline */
u64 SAL_nasids_size; /* SAL: size of each nasid mask in bytes */
};
-#define XPC_RP_VERSION _XPC_VERSION(2, 0) /* version 2.0 of the reserved page */
+#define XPC_RP_VERSION _XPC_VERSION(3, 0) /* version 3.0 of the reserved page */
/*
* Define the structures by which XPC variables can be exported to other
(XPC_RP_MACH_NASIDS(_rp) + \
xpc_nasid_mask_nlongs))
+
+/*
+ * The following structure describes the partition's heartbeat info which
+ * will be periodically read by other partitions to determine whether this
+ * XPC is still 'alive'.
+ */
+struct xpc_heartbeat_uv {
+ unsigned long value;
+ unsigned long offline; /* if 0, heartbeat should be changing */
+};
+
/*
* Info pertinent to a GRU message queue using a watch list for irq generation.
*/
/*
* The activate_mq is used to send/receive GRU messages that affect XPC's
- * heartbeat, partition active state, and channel state. This is UV only.
+ * partition active state and channel state. This is uv only.
*/
struct xpc_activate_mq_msghdr_uv {
unsigned int gru_msg_hdr; /* FOR GRU INTERNAL USE ONLY */
/* activate_mq defined message types */
#define XPC_ACTIVATE_MQ_MSG_SYNC_ACT_STATE_UV 0
-#define XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV 1
-#define XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV 2
-#define XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV 3
-#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 4
-#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 5
+#define XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV 1
+#define XPC_ACTIVATE_MQ_MSG_DEACTIVATE_REQ_UV 2
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 6
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 7
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 8
-#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 9
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREQUEST_UV 3
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_CLOSEREPLY_UV 4
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREQUEST_UV 5
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV 6
+#define XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV 7
-#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 10
-#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 11
+#define XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV 8
+#define XPC_ACTIVATE_MQ_MSG_MARK_DISENGAGED_UV 9
struct xpc_activate_mq_msg_uv {
struct xpc_activate_mq_msghdr_uv hdr;
};
-struct xpc_activate_mq_msg_heartbeat_req_uv {
- struct xpc_activate_mq_msghdr_uv hdr;
- u64 heartbeat;
-};
-
struct xpc_activate_mq_msg_activate_req_uv {
struct xpc_activate_mq_msghdr_uv hdr;
unsigned long rp_gpa;
+ unsigned long heartbeat_gpa;
unsigned long activate_gru_mq_desc_gpa;
};
unsigned long notify_gru_mq_desc_gpa;
};
+struct xpc_activate_mq_msg_chctl_opencomplete_uv {
+ struct xpc_activate_mq_msghdr_uv hdr;
+ short ch_number;
+};
+
/*
* Functions registered by add_timer() or called by kernel_thread() only
* allow for a single 64-bit argument. The following macros can be used to
#define XPC_C_WASCONNECTED 0x00000001 /* channel was connected */
-#define XPC_C_ROPENREPLY 0x00000002 /* remote open channel reply */
-#define XPC_C_OPENREPLY 0x00000004 /* local open channel reply */
-#define XPC_C_ROPENREQUEST 0x00000008 /* remote open channel request */
-#define XPC_C_OPENREQUEST 0x00000010 /* local open channel request */
+#define XPC_C_ROPENCOMPLETE 0x00000002 /* remote open channel complete */
+#define XPC_C_OPENCOMPLETE 0x00000004 /* local open channel complete */
+#define XPC_C_ROPENREPLY 0x00000008 /* remote open channel reply */
+#define XPC_C_OPENREPLY 0x00000010 /* local open channel reply */
+#define XPC_C_ROPENREQUEST 0x00000020 /* remote open channel request */
+#define XPC_C_OPENREQUEST 0x00000040 /* local open channel request */
-#define XPC_C_SETUP 0x00000020 /* channel's msgqueues are alloc'd */
-#define XPC_C_CONNECTEDCALLOUT 0x00000040 /* connected callout initiated */
+#define XPC_C_SETUP 0x00000080 /* channel's msgqueues are alloc'd */
+#define XPC_C_CONNECTEDCALLOUT 0x00000100 /* connected callout initiated */
#define XPC_C_CONNECTEDCALLOUT_MADE \
- 0x00000080 /* connected callout completed */
-#define XPC_C_CONNECTED 0x00000100 /* local channel is connected */
-#define XPC_C_CONNECTING 0x00000200 /* channel is being connected */
+ 0x00000200 /* connected callout completed */
+#define XPC_C_CONNECTED 0x00000400 /* local channel is connected */
+#define XPC_C_CONNECTING 0x00000800 /* channel is being connected */
-#define XPC_C_RCLOSEREPLY 0x00000400 /* remote close channel reply */
-#define XPC_C_CLOSEREPLY 0x00000800 /* local close channel reply */
-#define XPC_C_RCLOSEREQUEST 0x00001000 /* remote close channel request */
-#define XPC_C_CLOSEREQUEST 0x00002000 /* local close channel request */
+#define XPC_C_RCLOSEREPLY 0x00001000 /* remote close channel reply */
+#define XPC_C_CLOSEREPLY 0x00002000 /* local close channel reply */
+#define XPC_C_RCLOSEREQUEST 0x00004000 /* remote close channel request */
+#define XPC_C_CLOSEREQUEST 0x00008000 /* local close channel request */
-#define XPC_C_DISCONNECTED 0x00004000 /* channel is disconnected */
-#define XPC_C_DISCONNECTING 0x00008000 /* channel is being disconnected */
+#define XPC_C_DISCONNECTED 0x00010000 /* channel is disconnected */
+#define XPC_C_DISCONNECTING 0x00020000 /* channel is being disconnected */
#define XPC_C_DISCONNECTINGCALLOUT \
- 0x00010000 /* disconnecting callout initiated */
+ 0x00040000 /* disconnecting callout initiated */
#define XPC_C_DISCONNECTINGCALLOUT_MADE \
- 0x00020000 /* disconnecting callout completed */
-#define XPC_C_WDISCONNECT 0x00040000 /* waiting for channel disconnect */
+ 0x00080000 /* disconnecting callout completed */
+#define XPC_C_WDISCONNECT 0x00100000 /* waiting for channel disconnect */
/*
* The channel control flags (chctl) union consists of a 64-bit variable which
#define XPC_CHCTL_CLOSEREPLY 0x02
#define XPC_CHCTL_OPENREQUEST 0x04
#define XPC_CHCTL_OPENREPLY 0x08
-#define XPC_CHCTL_MSGREQUEST 0x10
+#define XPC_CHCTL_OPENCOMPLETE 0x10
+#define XPC_CHCTL_MSGREQUEST 0x20
#define XPC_OPENCLOSE_CHCTL_FLAGS \
(XPC_CHCTL_CLOSEREQUEST | XPC_CHCTL_CLOSEREPLY | \
- XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY)
+ XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY | \
+ XPC_CHCTL_OPENCOMPLETE)
#define XPC_MSG_CHCTL_FLAGS XPC_CHCTL_MSGREQUEST
static inline int
};
struct xpc_partition_uv {
+ unsigned long heartbeat_gpa; /* phys addr of partition's heartbeat */
+ struct xpc_heartbeat_uv cached_heartbeat; /* cached copy of */
+ /* partition's heartbeat */
unsigned long activate_gru_mq_desc_gpa; /* phys addr of parititon's */
/* activate mq's gru mq */
/* descriptor */
u8 remote_act_state; /* remote partition's act_state */
u8 act_state_req; /* act_state request from remote partition */
enum xp_retval reason; /* reason for deactivate act_state request */
- u64 heartbeat; /* incremented by remote partition */
};
/* struct xpc_partition_uv flags */
-#define XPC_P_HEARTBEAT_OFFLINE_UV 0x00000001
+#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000001
#define XPC_P_ENGAGED_UV 0x00000002
-#define XPC_P_CACHED_ACTIVATE_GRU_MQ_DESC_UV 0x00000004
/* struct xpc_partition_uv act_state change requests */
} ____cacheline_aligned;
+struct xpc_arch_operations {
+ int (*setup_partitions) (void);
+ void (*teardown_partitions) (void);
+ void (*process_activate_IRQ_rcvd) (void);
+ enum xp_retval (*get_partition_rsvd_page_pa)
+ (void *, u64 *, unsigned long *, size_t *);
+ int (*setup_rsvd_page) (struct xpc_rsvd_page *);
+
+ void (*allow_hb) (short);
+ void (*disallow_hb) (short);
+ void (*disallow_all_hbs) (void);
+ void (*increment_heartbeat) (void);
+ void (*offline_heartbeat) (void);
+ void (*online_heartbeat) (void);
+ void (*heartbeat_init) (void);
+ void (*heartbeat_exit) (void);
+ enum xp_retval (*get_remote_heartbeat) (struct xpc_partition *);
+
+ void (*request_partition_activation) (struct xpc_rsvd_page *,
+ unsigned long, int);
+ void (*request_partition_reactivation) (struct xpc_partition *);
+ void (*request_partition_deactivation) (struct xpc_partition *);
+ void (*cancel_partition_deactivation_request) (struct xpc_partition *);
+ enum xp_retval (*setup_ch_structures) (struct xpc_partition *);
+ void (*teardown_ch_structures) (struct xpc_partition *);
+
+ enum xp_retval (*make_first_contact) (struct xpc_partition *);
+
+ u64 (*get_chctl_all_flags) (struct xpc_partition *);
+ void (*send_chctl_closerequest) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_closereply) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_openrequest) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_openreply) (struct xpc_channel *, unsigned long *);
+ void (*send_chctl_opencomplete) (struct xpc_channel *, unsigned long *);
+ void (*process_msg_chctl_flags) (struct xpc_partition *, int);
+
+ enum xp_retval (*save_remote_msgqueue_pa) (struct xpc_channel *,
+ unsigned long);
+
+ enum xp_retval (*setup_msg_structures) (struct xpc_channel *);
+ void (*teardown_msg_structures) (struct xpc_channel *);
+
+ void (*indicate_partition_engaged) (struct xpc_partition *);
+ void (*indicate_partition_disengaged) (struct xpc_partition *);
+ void (*assume_partition_disengaged) (short);
+ int (*partition_engaged) (short);
+ int (*any_partition_engaged) (void);
+
+ int (*n_of_deliverable_payloads) (struct xpc_channel *);
+ enum xp_retval (*send_payload) (struct xpc_channel *, u32, void *,
+ u16, u8, xpc_notify_func, void *);
+ void *(*get_deliverable_payload) (struct xpc_channel *);
+ void (*received_payload) (struct xpc_channel *, void *);
+ void (*notify_senders_of_disconnect) (struct xpc_channel *);
+};
+
/* struct xpc_partition act_state values (for XPC HB) */
#define XPC_P_AS_INACTIVE 0x00 /* partition is not active */
/* found in xpc_main.c */
extern struct device *xpc_part;
extern struct device *xpc_chan;
+extern struct xpc_arch_operations xpc_arch_ops;
extern int xpc_disengage_timelimit;
extern int xpc_disengage_timedout;
extern int xpc_activate_IRQ_rcvd;
extern spinlock_t xpc_activate_IRQ_rcvd_lock;
extern wait_queue_head_t xpc_activate_IRQ_wq;
-extern void *xpc_heartbeating_to_mask;
extern void *xpc_kzalloc_cacheline_aligned(size_t, gfp_t, void **);
extern void xpc_activate_partition(struct xpc_partition *);
extern void xpc_activate_kthreads(struct xpc_channel *, int);
extern void xpc_create_kthreads(struct xpc_channel *, int, int);
extern void xpc_disconnect_wait(int);
-extern int (*xpc_setup_partitions_sn) (void);
-extern void (*xpc_teardown_partitions_sn) (void);
-extern enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *, u64 *,
- unsigned long *,
- size_t *);
-extern int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *);
-extern void (*xpc_heartbeat_init) (void);
-extern void (*xpc_heartbeat_exit) (void);
-extern void (*xpc_increment_heartbeat) (void);
-extern void (*xpc_offline_heartbeat) (void);
-extern void (*xpc_online_heartbeat) (void);
-extern enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *);
-extern enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *);
-extern u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *);
-extern enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *);
-extern void (*xpc_teardown_msg_structures) (struct xpc_channel *);
-extern void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *);
-extern void (*xpc_process_msg_chctl_flags) (struct xpc_partition *, int);
-extern int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *);
-extern void *(*xpc_get_deliverable_payload) (struct xpc_channel *);
-extern void (*xpc_request_partition_activation) (struct xpc_rsvd_page *,
- unsigned long, int);
-extern void (*xpc_request_partition_reactivation) (struct xpc_partition *);
-extern void (*xpc_request_partition_deactivation) (struct xpc_partition *);
-extern void (*xpc_cancel_partition_deactivation_request) (
- struct xpc_partition *);
-extern void (*xpc_process_activate_IRQ_rcvd) (void);
-extern enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *);
-extern void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *);
-
-extern void (*xpc_indicate_partition_engaged) (struct xpc_partition *);
-extern int (*xpc_partition_engaged) (short);
-extern int (*xpc_any_partition_engaged) (void);
-extern void (*xpc_indicate_partition_disengaged) (struct xpc_partition *);
-extern void (*xpc_assume_partition_disengaged) (short);
-
-extern void (*xpc_send_chctl_closerequest) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_closereply) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_openrequest) (struct xpc_channel *,
- unsigned long *);
-extern void (*xpc_send_chctl_openreply) (struct xpc_channel *, unsigned long *);
-
-extern enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *,
- unsigned long);
-
-extern enum xp_retval (*xpc_send_payload) (struct xpc_channel *, u32, void *,
- u16, u8, xpc_notify_func, void *);
-extern void (*xpc_received_payload) (struct xpc_channel *, void *);
/* found in xpc_sn2.c */
extern int xpc_init_sn2(void);
extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
-static inline int
-xpc_hb_allowed(short partid, void *heartbeating_to_mask)
-{
- return test_bit(partid, heartbeating_to_mask);
-}
-
-static inline int
-xpc_any_hbs_allowed(void)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- return !bitmap_empty(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
-static inline void
-xpc_allow_hb(short partid)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- set_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_hb(short partid)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- clear_bit(partid, xpc_heartbeating_to_mask);
-}
-
-static inline void
-xpc_disallow_all_hbs(void)
-{
- DBUG_ON(xpc_heartbeating_to_mask == NULL);
- bitmap_zero(xpc_heartbeating_to_mask, xp_max_npartitions);
-}
-
static inline void
xpc_wakeup_channel_mgr(struct xpc_partition *part)
{
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
if (!(ch->flags & XPC_C_SETUP)) {
spin_unlock_irqrestore(&ch->lock, *irq_flags);
- ret = xpc_setup_msg_structures(ch);
+ ret = xpc_arch_ops.setup_msg_structures(ch);
spin_lock_irqsave(&ch->lock, *irq_flags);
if (ret != xpSuccess)
XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
+ else
+ ch->flags |= XPC_C_SETUP;
- ch->flags |= XPC_C_SETUP;
-
- if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
+ if (ch->flags & XPC_C_DISCONNECTING)
return;
}
if (!(ch->flags & XPC_C_OPENREPLY)) {
ch->flags |= XPC_C_OPENREPLY;
- xpc_send_chctl_openreply(ch, irq_flags);
+ xpc_arch_ops.send_chctl_openreply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_ROPENREPLY))
return;
- ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */
+ if (!(ch->flags & XPC_C_OPENCOMPLETE)) {
+ ch->flags |= (XPC_C_OPENCOMPLETE | XPC_C_CONNECTED);
+ xpc_arch_ops.send_chctl_opencomplete(ch, irq_flags);
+ }
+
+ if (!(ch->flags & XPC_C_ROPENCOMPLETE))
+ return;
dev_info(xpc_chan, "channel %d to partition %d connected\n",
ch->number, ch->partid);
- spin_unlock_irqrestore(&ch->lock, *irq_flags);
- xpc_create_kthreads(ch, 1, 0);
- spin_lock_irqsave(&ch->lock, *irq_flags);
+ ch->flags = (XPC_C_CONNECTED | XPC_C_SETUP); /* clear all else */
}
/*
if (part->act_state == XPC_P_AS_DEACTIVATING) {
/* can't proceed until the other side disengages from us */
- if (xpc_partition_engaged(ch->partid))
+ if (xpc_arch_ops.partition_engaged(ch->partid))
return;
} else {
if (!(ch->flags & XPC_C_CLOSEREPLY)) {
ch->flags |= XPC_C_CLOSEREPLY;
- xpc_send_chctl_closereply(ch, irq_flags);
+ xpc_arch_ops.send_chctl_closereply(ch, irq_flags);
}
if (!(ch->flags & XPC_C_RCLOSEREPLY))
/* wake those waiting for notify completion */
if (atomic_read(&ch->n_to_notify) > 0) {
/* we do callout while holding ch->lock, callout can't block */
- xpc_notify_senders_of_disconnect(ch);
+ xpc_arch_ops.notify_senders_of_disconnect(ch);
}
/* both sides are disconnected now */
DBUG_ON(atomic_read(&ch->n_to_notify) != 0);
/* it's now safe to free the channel's message queues */
- xpc_teardown_msg_structures(ch);
+ xpc_arch_ops.teardown_msg_structures(ch);
ch->func = NULL;
ch->key = NULL;
/*
* Mark the channel disconnected and clear all other flags, including
- * XPC_C_SETUP (because of call to xpc_teardown_msg_structures()) but
- * not including XPC_C_WDISCONNECT (if it was set).
+ * XPC_C_SETUP (because of call to
+ * xpc_arch_ops.teardown_msg_structures()) but not including
+ * XPC_C_WDISCONNECT (if it was set).
*/
ch->flags = (XPC_C_DISCONNECTED | (ch->flags & XPC_C_WDISCONNECT));
struct xpc_channel *ch = &part->channels[ch_number];
enum xp_retval reason;
enum xp_retval ret;
+ int create_kthread = 0;
spin_lock_irqsave(&ch->lock, irq_flags);
* has had a chance to see that the channel is disconnected.
*/
ch->delayed_chctl_flags |= chctl_flags;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
if (chctl_flags & XPC_CHCTL_CLOSEREQUEST) {
XPC_CHCTL_CLOSEREQUEST;
spin_unlock(&part->chctl_lock);
}
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
XPC_SET_REASON(ch, 0, 0);
ch->flags |= (XPC_C_CONNECTING | XPC_C_ROPENREQUEST);
}
- chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY);
+ chctl_flags &= ~(XPC_CHCTL_OPENREQUEST | XPC_CHCTL_OPENREPLY |
+ XPC_CHCTL_OPENCOMPLETE);
/*
* The meaningful CLOSEREQUEST connection state fields are:
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
DBUG_ON(chctl_flags & XPC_CHCTL_CLOSEREPLY);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
xpc_process_disconnect(ch, &irq_flags);
if (ch->flags & XPC_C_DISCONNECTED) {
DBUG_ON(part->act_state != XPC_P_AS_DEACTIVATING);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & XPC_C_CLOSEREQUEST));
XPC_CHCTL_CLOSEREPLY;
spin_unlock(&part->chctl_lock);
}
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= XPC_C_RCLOSEREPLY;
if (part->act_state == XPC_P_AS_DEACTIVATING ||
(ch->flags & XPC_C_ROPENREQUEST)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_WDISCONNECT)) {
ch->delayed_chctl_flags |= XPC_CHCTL_OPENREQUEST;
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & (XPC_C_DISCONNECTED |
XPC_C_OPENREQUEST)));
*/
if (args->entry_size == 0 || args->local_nentries == 0) {
/* assume OPENREQUEST was delayed by mistake */
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= (XPC_C_ROPENREQUEST | XPC_C_CONNECTING);
if (args->entry_size != ch->entry_size) {
XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
&irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
} else {
ch->entry_size = args->entry_size;
args->local_msgqueue_pa, args->local_nentries,
args->remote_nentries, ch->partid, ch->number);
- if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED)) {
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
- }
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+ goto out;
+
if (!(ch->flags & XPC_C_OPENREQUEST)) {
XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
&irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
DBUG_ON(args->local_nentries == 0);
DBUG_ON(args->remote_nentries == 0);
- ret = xpc_save_remote_msgqueue_pa(ch, args->local_msgqueue_pa);
+ ret = xpc_arch_ops.save_remote_msgqueue_pa(ch,
+ args->local_msgqueue_pa);
if (ret != xpSuccess) {
XPC_DISCONNECT_CHANNEL(ch, ret, &irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
- return;
+ goto out;
}
ch->flags |= XPC_C_ROPENREPLY;
xpc_process_connect(ch, &irq_flags);
}
+ if (chctl_flags & XPC_CHCTL_OPENCOMPLETE) {
+
+ dev_dbg(xpc_chan, "XPC_CHCTL_OPENCOMPLETE received from "
+ "partid=%d, channel=%d\n", ch->partid, ch->number);
+
+ if (ch->flags & (XPC_C_DISCONNECTING | XPC_C_DISCONNECTED))
+ goto out;
+
+ if (!(ch->flags & XPC_C_OPENREQUEST) ||
+ !(ch->flags & XPC_C_OPENREPLY)) {
+ XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
+ &irq_flags);
+ goto out;
+ }
+
+ DBUG_ON(!(ch->flags & XPC_C_ROPENREQUEST));
+ DBUG_ON(!(ch->flags & XPC_C_ROPENREPLY));
+ DBUG_ON(!(ch->flags & XPC_C_CONNECTED));
+
+ ch->flags |= XPC_C_ROPENCOMPLETE;
+
+ xpc_process_connect(ch, &irq_flags);
+ create_kthread = 1;
+ }
+
+out:
spin_unlock_irqrestore(&ch->lock, irq_flags);
+
+ if (create_kthread)
+ xpc_create_kthreads(ch, 1, 0);
}
/*
/* initiate the connection */
ch->flags |= (XPC_C_OPENREQUEST | XPC_C_CONNECTING);
- xpc_send_chctl_openrequest(ch, &irq_flags);
+ xpc_arch_ops.send_chctl_openrequest(ch, &irq_flags);
xpc_process_connect(ch, &irq_flags);
int ch_number;
u32 ch_flags;
- chctl.all_flags = xpc_get_chctl_all_flags(part);
+ chctl.all_flags = xpc_arch_ops.get_chctl_all_flags(part);
/*
* Initiate channel connections for registered channels.
if (!(ch_flags & XPC_C_OPENREQUEST)) {
DBUG_ON(ch_flags & XPC_C_SETUP);
(void)xpc_connect_channel(ch);
- } else {
- spin_lock_irqsave(&ch->lock, irq_flags);
- xpc_process_connect(ch, &irq_flags);
- spin_unlock_irqrestore(&ch->lock, irq_flags);
}
continue;
}
*/
if (chctl.flags[ch_number] & XPC_MSG_CHCTL_FLAGS)
- xpc_process_msg_chctl_flags(part, ch_number);
+ xpc_arch_ops.process_msg_chctl_flags(part, ch_number);
}
}
XPC_C_ROPENREQUEST | XPC_C_ROPENREPLY |
XPC_C_CONNECTING | XPC_C_CONNECTED);
- xpc_send_chctl_closerequest(ch, irq_flags);
+ xpc_arch_ops.send_chctl_closerequest(ch, irq_flags);
if (channel_was_connected)
ch->flags |= XPC_C_WASCONNECTED;
DBUG_ON(payload == NULL);
if (xpc_part_ref(part)) {
- ret = xpc_send_payload(&part->channels[ch_number], flags,
- payload, payload_size, 0, NULL, NULL);
+ ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+ flags, payload, payload_size, 0, NULL, NULL);
xpc_part_deref(part);
}
DBUG_ON(func == NULL);
if (xpc_part_ref(part)) {
- ret = xpc_send_payload(&part->channels[ch_number], flags,
- payload, payload_size, XPC_N_CALL, func,
- key);
+ ret = xpc_arch_ops.send_payload(&part->channels[ch_number],
+ flags, payload, payload_size, XPC_N_CALL, func, key);
xpc_part_deref(part);
}
return ret;
{
void *payload;
- payload = xpc_get_deliverable_payload(ch);
+ payload = xpc_arch_ops.get_deliverable_payload(ch);
if (payload != NULL) {
/*
DBUG_ON(ch_number < 0 || ch_number >= part->nchannels);
ch = &part->channels[ch_number];
- xpc_received_payload(ch, payload);
+ xpc_arch_ops.received_payload(ch, payload);
/* the call to xpc_msgqueue_ref() was done by xpc_deliver_payload() */
xpc_msgqueue_deref(ch);
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2004-2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2004-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
static unsigned long xpc_hb_check_timeout;
static struct timer_list xpc_hb_timer;
-void *xpc_heartbeating_to_mask;
/* notification that the xpc_hb_checker thread has exited */
static DECLARE_COMPLETION(xpc_hb_checker_exited);
.notifier_call = xpc_system_die,
};
-int (*xpc_setup_partitions_sn) (void);
-void (*xpc_teardown_partitions_sn) (void);
-enum xp_retval (*xpc_get_partition_rsvd_page_pa) (void *buf, u64 *cookie,
- unsigned long *rp_pa,
- size_t *len);
-int (*xpc_setup_rsvd_page_sn) (struct xpc_rsvd_page *rp);
-void (*xpc_heartbeat_init) (void);
-void (*xpc_heartbeat_exit) (void);
-void (*xpc_increment_heartbeat) (void);
-void (*xpc_offline_heartbeat) (void);
-void (*xpc_online_heartbeat) (void);
-enum xp_retval (*xpc_get_remote_heartbeat) (struct xpc_partition *part);
-
-enum xp_retval (*xpc_make_first_contact) (struct xpc_partition *part);
-void (*xpc_notify_senders_of_disconnect) (struct xpc_channel *ch);
-u64 (*xpc_get_chctl_all_flags) (struct xpc_partition *part);
-enum xp_retval (*xpc_setup_msg_structures) (struct xpc_channel *ch);
-void (*xpc_teardown_msg_structures) (struct xpc_channel *ch);
-void (*xpc_process_msg_chctl_flags) (struct xpc_partition *part, int ch_number);
-int (*xpc_n_of_deliverable_payloads) (struct xpc_channel *ch);
-void *(*xpc_get_deliverable_payload) (struct xpc_channel *ch);
-
-void (*xpc_request_partition_activation) (struct xpc_rsvd_page *remote_rp,
- unsigned long remote_rp_pa,
- int nasid);
-void (*xpc_request_partition_reactivation) (struct xpc_partition *part);
-void (*xpc_request_partition_deactivation) (struct xpc_partition *part);
-void (*xpc_cancel_partition_deactivation_request) (struct xpc_partition *part);
-
-void (*xpc_process_activate_IRQ_rcvd) (void);
-enum xp_retval (*xpc_setup_ch_structures_sn) (struct xpc_partition *part);
-void (*xpc_teardown_ch_structures_sn) (struct xpc_partition *part);
-
-void (*xpc_indicate_partition_engaged) (struct xpc_partition *part);
-int (*xpc_partition_engaged) (short partid);
-int (*xpc_any_partition_engaged) (void);
-void (*xpc_indicate_partition_disengaged) (struct xpc_partition *part);
-void (*xpc_assume_partition_disengaged) (short partid);
-
-void (*xpc_send_chctl_closerequest) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_closereply) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_openrequest) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-void (*xpc_send_chctl_openreply) (struct xpc_channel *ch,
- unsigned long *irq_flags);
-
-enum xp_retval (*xpc_save_remote_msgqueue_pa) (struct xpc_channel *ch,
- unsigned long msgqueue_pa);
-
-enum xp_retval (*xpc_send_payload) (struct xpc_channel *ch, u32 flags,
- void *payload, u16 payload_size,
- u8 notify_type, xpc_notify_func func,
- void *key);
-void (*xpc_received_payload) (struct xpc_channel *ch, void *payload);
+struct xpc_arch_operations xpc_arch_ops;
/*
* Timer function to enforce the timelimit on the partition disengage.
(void)xpc_partition_disengaged(part);
DBUG_ON(part->disengage_timeout != 0);
- DBUG_ON(xpc_partition_engaged(XPC_PARTID(part)));
+ DBUG_ON(xpc_arch_ops.partition_engaged(XPC_PARTID(part)));
}
/*
static void
xpc_hb_beater(unsigned long dummy)
{
- xpc_increment_heartbeat();
+ xpc_arch_ops.increment_heartbeat();
if (time_is_before_eq_jiffies(xpc_hb_check_timeout))
wake_up_interruptible(&xpc_activate_IRQ_wq);
static void
xpc_start_hb_beater(void)
{
- xpc_heartbeat_init();
+ xpc_arch_ops.heartbeat_init();
init_timer(&xpc_hb_timer);
xpc_hb_timer.function = xpc_hb_beater;
xpc_hb_beater(0);
xpc_stop_hb_beater(void)
{
del_timer_sync(&xpc_hb_timer);
- xpc_heartbeat_exit();
+ xpc_arch_ops.heartbeat_exit();
}
/*
continue;
}
- ret = xpc_get_remote_heartbeat(part);
+ ret = xpc_arch_ops.get_remote_heartbeat(part);
if (ret != xpSuccess)
XPC_DEACTIVATE_PARTITION(part, ret);
}
force_IRQ = 0;
dev_dbg(xpc_part, "processing activate IRQs "
"received\n");
- xpc_process_activate_IRQ_rcvd();
+ xpc_arch_ops.process_activate_IRQ_rcvd();
}
/* wait for IRQ or timeout */
init_waitqueue_head(&ch->idle_wq);
}
- ret = xpc_setup_ch_structures_sn(part);
+ ret = xpc_arch_ops.setup_ch_structures(part);
if (ret != xpSuccess)
goto out_2;
/* now we can begin tearing down the infrastructure */
- xpc_teardown_ch_structures_sn(part);
+ xpc_arch_ops.teardown_ch_structures(part);
kfree(part->remote_openclose_args_base);
part->remote_openclose_args = NULL;
dev_dbg(xpc_part, "activating partition %d\n", partid);
- xpc_allow_hb(partid);
+ xpc_arch_ops.allow_hb(partid);
if (xpc_setup_ch_structures(part) == xpSuccess) {
(void)xpc_part_ref(part); /* this will always succeed */
- if (xpc_make_first_contact(part) == xpSuccess) {
+ if (xpc_arch_ops.make_first_contact(part) == xpSuccess) {
xpc_mark_partition_active(part);
xpc_channel_mgr(part);
/* won't return until partition is deactivating */
xpc_teardown_ch_structures(part);
}
- xpc_disallow_hb(partid);
+ xpc_arch_ops.disallow_hb(partid);
xpc_mark_partition_inactive(part);
if (part->reason == xpReactivating) {
/* interrupting ourselves results in activating partition */
- xpc_request_partition_reactivation(part);
+ xpc_arch_ops.request_partition_reactivation(part);
}
return 0;
static void
xpc_kthread_waitmsgs(struct xpc_partition *part, struct xpc_channel *ch)
{
+ int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+ xpc_arch_ops.n_of_deliverable_payloads;
+
do {
/* deliver messages to their intended recipients */
- while (xpc_n_of_deliverable_payloads(ch) > 0 &&
+ while (n_of_deliverable_payloads(ch) > 0 &&
!(ch->flags & XPC_C_DISCONNECTING)) {
xpc_deliver_payload(ch);
}
"wait_event_interruptible_exclusive()\n");
(void)wait_event_interruptible_exclusive(ch->idle_wq,
- (xpc_n_of_deliverable_payloads(ch) > 0 ||
+ (n_of_deliverable_payloads(ch) > 0 ||
(ch->flags & XPC_C_DISCONNECTING)));
atomic_dec(&ch->kthreads_idle);
struct xpc_channel *ch;
int n_needed;
unsigned long irq_flags;
+ int (*n_of_deliverable_payloads) (struct xpc_channel *) =
+ xpc_arch_ops.n_of_deliverable_payloads;
dev_dbg(xpc_chan, "kthread starting, partid=%d, channel=%d\n",
partid, ch_number);
* additional kthreads to help deliver them. We only
* need one less than total #of messages to deliver.
*/
- n_needed = xpc_n_of_deliverable_payloads(ch) - 1;
+ n_needed = n_of_deliverable_payloads(ch) - 1;
if (n_needed > 0 && !(ch->flags & XPC_C_DISCONNECTING))
xpc_activate_kthreads(ch, n_needed);
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_indicate_partition_disengaged(part);
+ xpc_arch_ops.indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
u64 args = XPC_PACK_ARGS(ch->partid, ch->number);
struct xpc_partition *part = &xpc_partitions[ch->partid];
struct task_struct *kthread;
+ void (*indicate_partition_disengaged) (struct xpc_partition *) =
+ xpc_arch_ops.indicate_partition_disengaged;
while (needed-- > 0) {
} else if (atomic_inc_return(&ch->kthreads_assigned) == 1 &&
atomic_inc_return(&part->nchannels_engaged) == 1) {
- xpc_indicate_partition_engaged(part);
+ xpc_arch_ops.indicate_partition_engaged(part);
}
(void)xpc_part_ref(part);
xpc_msgqueue_ref(ch);
if (atomic_dec_return(&ch->kthreads_assigned) == 0 &&
atomic_dec_return(&part->nchannels_engaged) == 0) {
- xpc_indicate_partition_disengaged(part);
+ indicate_partition_disengaged(part);
}
xpc_msgqueue_deref(ch);
xpc_part_deref(part);
atomic_set(&part->references, 0);
}
- return xpc_setup_partitions_sn();
+ return xpc_arch_ops.setup_partitions();
}
static void
xpc_teardown_partitions(void)
{
- xpc_teardown_partitions_sn();
+ xpc_arch_ops.teardown_partitions();
kfree(xpc_partitions);
}
disengage_timeout = part->disengage_timeout;
}
- if (xpc_any_partition_engaged()) {
+ if (xpc_arch_ops.any_partition_engaged()) {
if (time_is_before_jiffies(printmsg_time)) {
dev_info(xpc_part, "waiting for remote "
"partitions to deactivate, timeout in "
} while (1);
- DBUG_ON(xpc_any_partition_engaged());
- DBUG_ON(xpc_any_hbs_allowed() != 0);
+ DBUG_ON(xpc_arch_ops.any_partition_engaged());
xpc_teardown_rsvd_page();
/* keep xpc_hb_checker thread from doing anything (just in case) */
xpc_exiting = 1;
- xpc_disallow_all_hbs(); /*indicate we're deactivated */
+ xpc_arch_ops.disallow_all_hbs(); /*indicate we're deactivated */
for (partid = 0; partid < xp_max_npartitions; partid++) {
part = &xpc_partitions[partid];
- if (xpc_partition_engaged(partid) ||
+ if (xpc_arch_ops.partition_engaged(partid) ||
part->act_state != XPC_P_AS_INACTIVE) {
- xpc_request_partition_deactivation(part);
- xpc_indicate_partition_disengaged(part);
+ xpc_arch_ops.request_partition_deactivation(part);
+ xpc_arch_ops.indicate_partition_disengaged(part);
}
}
wait_to_print = XPC_DEACTIVATE_PRINTMSG_INTERVAL * 1000 * 5;
while (1) {
- any_engaged = xpc_any_partition_engaged();
+ any_engaged = xpc_arch_ops.any_partition_engaged();
if (!any_engaged) {
dev_info(xpc_part, "all partitions have deactivated\n");
break;
if (!keep_waiting--) {
for (partid = 0; partid < xp_max_npartitions;
partid++) {
- if (xpc_partition_engaged(partid)) {
+ if (xpc_arch_ops.partition_engaged(partid)) {
dev_info(xpc_part, "deactivate from "
"remote partition %d timed "
"out\n", partid);
/* fall through */
case DIE_MCA_MONARCH_ENTER:
case DIE_INIT_MONARCH_ENTER:
- xpc_offline_heartbeat();
+ xpc_arch_ops.offline_heartbeat();
break;
case DIE_KDEBUG_LEAVE:
/* fall through */
case DIE_MCA_MONARCH_LEAVE:
case DIE_INIT_MONARCH_LEAVE:
- xpc_online_heartbeat();
+ xpc_arch_ops.online_heartbeat();
break;
}
#else
size_t buf_len = 0;
void *buf = buf;
void *buf_base = NULL;
+ enum xp_retval (*get_partition_rsvd_page_pa)
+ (void *, u64 *, unsigned long *, size_t *) =
+ xpc_arch_ops.get_partition_rsvd_page_pa;
while (1) {
* ??? function or have two versions? Rename rp_pa for UV to
* ??? rp_gpa?
*/
- ret = xpc_get_partition_rsvd_page_pa(buf, &cookie, &rp_pa,
- &len);
+ ret = get_partition_rsvd_page_pa(buf, &cookie, &rp_pa, &len);
dev_dbg(xpc_part, "SAL returned with ret=%d, cookie=0x%016lx, "
"address=0x%016lx, len=0x%016lx\n", ret,
xpc_part_nasids = XPC_RP_PART_NASIDS(rp);
xpc_mach_nasids = XPC_RP_MACH_NASIDS(rp);
- ret = xpc_setup_rsvd_page_sn(rp);
+ ret = xpc_arch_ops.setup_rsvd_page(rp);
if (ret != 0)
return ret;
short partid = XPC_PARTID(part);
int disengaged;
- disengaged = !xpc_partition_engaged(partid);
+ disengaged = !xpc_arch_ops.partition_engaged(partid);
if (part->disengage_timeout) {
if (!disengaged) {
if (time_is_after_jiffies(part->disengage_timeout)) {
dev_info(xpc_part, "deactivate request to remote "
"partition %d timed out\n", partid);
xpc_disengage_timedout = 1;
- xpc_assume_partition_disengaged(partid);
+ xpc_arch_ops.assume_partition_disengaged(partid);
disengaged = 1;
}
part->disengage_timeout = 0;
if (part->act_state != XPC_P_AS_INACTIVE)
xpc_wakeup_channel_mgr(part);
- xpc_cancel_partition_deactivation_request(part);
+ xpc_arch_ops.cancel_partition_deactivation_request(part);
}
return disengaged;
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
if (reason == xpReactivating) {
/* we interrupt ourselves to reactivate partition */
- xpc_request_partition_reactivation(part);
+ xpc_arch_ops.request_partition_reactivation(part);
}
return;
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
/* ask remote partition to deactivate with regard to us */
- xpc_request_partition_deactivation(part);
+ xpc_arch_ops.request_partition_deactivation(part);
/* set a timelimit on the disengage phase of the deactivation request */
part->disengage_timeout = jiffies + (xpc_disengage_timelimit * HZ);
continue;
}
- xpc_request_partition_activation(remote_rp,
+ xpc_arch_ops.request_partition_activation(remote_rp,
remote_rp_pa, nasid);
}
}
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ * Copyright (c) 2008-2009 Silicon Graphics, Inc. All Rights Reserved.
*/
/*
static struct xpc_vars_part_sn2 *xpc_vars_part_sn2;
static int
-xpc_setup_partitions_sn_sn2(void)
+xpc_setup_partitions_sn2(void)
{
/* nothing needs to be done */
return 0;
}
static void
-xpc_teardown_partitions_sn_sn2(void)
+xpc_teardown_partitions_sn2(void)
{
/* nothing needs to be done */
}
XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENREPLY, irq_flags);
}
+static void
+xpc_send_chctl_opencomplete_sn2(struct xpc_channel *ch,
+ unsigned long *irq_flags)
+{
+ XPC_SEND_NOTIFY_IRQ_SN2(ch, XPC_CHCTL_OPENCOMPLETE, irq_flags);
+}
+
static void
xpc_send_chctl_msgrequest_sn2(struct xpc_channel *ch)
{
static int
-xpc_setup_rsvd_page_sn_sn2(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_sn2(struct xpc_rsvd_page *rp)
{
struct amo *amos_page;
int i;
xpc_vars_sn2 = XPC_RP_VARS(rp);
- rp->sn.vars_pa = xp_pa(xpc_vars_sn2);
+ rp->sn.sn2.vars_pa = xp_pa(xpc_vars_sn2);
/* vars_part array follows immediately after vars */
xpc_vars_part_sn2 = (struct xpc_vars_part_sn2 *)((u8 *)XPC_RP_VARS(rp) +
return 0;
}
+static int
+xpc_hb_allowed_sn2(short partid, void *heartbeating_to_mask)
+{
+ return test_bit(partid, heartbeating_to_mask);
+}
+
+static void
+xpc_allow_hb_sn2(short partid)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ set_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_hb_sn2(short partid)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ clear_bit(partid, xpc_vars_sn2->heartbeating_to_mask);
+}
+
+static void
+xpc_disallow_all_hbs_sn2(void)
+{
+ DBUG_ON(xpc_vars_sn2 == NULL);
+ bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, xp_max_npartitions);
+}
+
static void
xpc_increment_heartbeat_sn2(void)
{
DBUG_ON(xpc_vars_sn2 == NULL);
bitmap_zero(xpc_vars_sn2->heartbeating_to_mask, XP_MAX_NPARTITIONS_SN2);
- xpc_heartbeating_to_mask = &xpc_vars_sn2->heartbeating_to_mask[0];
xpc_online_heartbeat_sn2();
}
remote_vars->heartbeating_to_mask[0]);
if ((remote_vars->heartbeat == part->last_heartbeat &&
- remote_vars->heartbeat_offline == 0) ||
- !xpc_hb_allowed(sn_partition_id,
- &remote_vars->heartbeating_to_mask)) {
+ !remote_vars->heartbeat_offline) ||
+ !xpc_hb_allowed_sn2(sn_partition_id,
+ remote_vars->heartbeating_to_mask)) {
ret = xpNoHeartbeat;
} else {
part->last_heartbeat = remote_vars->heartbeat;
return;
}
- remote_vars_pa = remote_rp->sn.vars_pa;
+ remote_vars_pa = remote_rp->sn.sn2.vars_pa;
remote_rp_version = remote_rp->version;
remote_rp_ts_jiffies = remote_rp->ts_jiffies;
* Setup the channel structures that are sn2 specific.
*/
static enum xp_retval
-xpc_setup_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_setup_ch_structures_sn2(struct xpc_partition *part)
{
struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
struct xpc_channel_sn2 *ch_sn2;
* Teardown the channel structures that are sn2 specific.
*/
static void
-xpc_teardown_ch_structures_sn_sn2(struct xpc_partition *part)
+xpc_teardown_ch_structures_sn2(struct xpc_partition *part)
{
struct xpc_partition_sn2 *part_sn2 = &part->sn.sn2;
short partid = XPC_PARTID(part);
xpc_acknowledge_msgs_sn2(ch, get, msg->flags);
}
+static struct xpc_arch_operations xpc_arch_ops_sn2 = {
+ .setup_partitions = xpc_setup_partitions_sn2,
+ .teardown_partitions = xpc_teardown_partitions_sn2,
+ .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2,
+ .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2,
+ .setup_rsvd_page = xpc_setup_rsvd_page_sn2,
+
+ .allow_hb = xpc_allow_hb_sn2,
+ .disallow_hb = xpc_disallow_hb_sn2,
+ .disallow_all_hbs = xpc_disallow_all_hbs_sn2,
+ .increment_heartbeat = xpc_increment_heartbeat_sn2,
+ .offline_heartbeat = xpc_offline_heartbeat_sn2,
+ .online_heartbeat = xpc_online_heartbeat_sn2,
+ .heartbeat_init = xpc_heartbeat_init_sn2,
+ .heartbeat_exit = xpc_heartbeat_exit_sn2,
+ .get_remote_heartbeat = xpc_get_remote_heartbeat_sn2,
+
+ .request_partition_activation =
+ xpc_request_partition_activation_sn2,
+ .request_partition_reactivation =
+ xpc_request_partition_reactivation_sn2,
+ .request_partition_deactivation =
+ xpc_request_partition_deactivation_sn2,
+ .cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_sn2,
+
+ .setup_ch_structures = xpc_setup_ch_structures_sn2,
+ .teardown_ch_structures = xpc_teardown_ch_structures_sn2,
+
+ .make_first_contact = xpc_make_first_contact_sn2,
+
+ .get_chctl_all_flags = xpc_get_chctl_all_flags_sn2,
+ .send_chctl_closerequest = xpc_send_chctl_closerequest_sn2,
+ .send_chctl_closereply = xpc_send_chctl_closereply_sn2,
+ .send_chctl_openrequest = xpc_send_chctl_openrequest_sn2,
+ .send_chctl_openreply = xpc_send_chctl_openreply_sn2,
+ .send_chctl_opencomplete = xpc_send_chctl_opencomplete_sn2,
+ .process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2,
+
+ .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2,
+
+ .setup_msg_structures = xpc_setup_msg_structures_sn2,
+ .teardown_msg_structures = xpc_teardown_msg_structures_sn2,
+
+ .indicate_partition_engaged = xpc_indicate_partition_engaged_sn2,
+ .indicate_partition_disengaged = xpc_indicate_partition_disengaged_sn2,
+ .partition_engaged = xpc_partition_engaged_sn2,
+ .any_partition_engaged = xpc_any_partition_engaged_sn2,
+ .assume_partition_disengaged = xpc_assume_partition_disengaged_sn2,
+
+ .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2,
+ .send_payload = xpc_send_payload_sn2,
+ .get_deliverable_payload = xpc_get_deliverable_payload_sn2,
+ .received_payload = xpc_received_payload_sn2,
+ .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2,
+};
+
int
xpc_init_sn2(void)
{
int ret;
size_t buf_size;
- xpc_setup_partitions_sn = xpc_setup_partitions_sn_sn2;
- xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_sn2;
- xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_sn2;
- xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_sn2;
- xpc_increment_heartbeat = xpc_increment_heartbeat_sn2;
- xpc_offline_heartbeat = xpc_offline_heartbeat_sn2;
- xpc_online_heartbeat = xpc_online_heartbeat_sn2;
- xpc_heartbeat_init = xpc_heartbeat_init_sn2;
- xpc_heartbeat_exit = xpc_heartbeat_exit_sn2;
- xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_sn2;
-
- xpc_request_partition_activation = xpc_request_partition_activation_sn2;
- xpc_request_partition_reactivation =
- xpc_request_partition_reactivation_sn2;
- xpc_request_partition_deactivation =
- xpc_request_partition_deactivation_sn2;
- xpc_cancel_partition_deactivation_request =
- xpc_cancel_partition_deactivation_request_sn2;
-
- xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_sn2;
- xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_sn2;
- xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_sn2;
- xpc_make_first_contact = xpc_make_first_contact_sn2;
-
- xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_sn2;
- xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_sn2;
- xpc_send_chctl_closereply = xpc_send_chctl_closereply_sn2;
- xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_sn2;
- xpc_send_chctl_openreply = xpc_send_chctl_openreply_sn2;
-
- xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_sn2;
-
- xpc_setup_msg_structures = xpc_setup_msg_structures_sn2;
- xpc_teardown_msg_structures = xpc_teardown_msg_structures_sn2;
-
- xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_sn2;
- xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_sn2;
- xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_sn2;
- xpc_get_deliverable_payload = xpc_get_deliverable_payload_sn2;
-
- xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_sn2;
- xpc_indicate_partition_disengaged =
- xpc_indicate_partition_disengaged_sn2;
- xpc_partition_engaged = xpc_partition_engaged_sn2;
- xpc_any_partition_engaged = xpc_any_partition_engaged_sn2;
- xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_sn2;
-
- xpc_send_payload = xpc_send_payload_sn2;
- xpc_received_payload = xpc_received_payload_sn2;
+ xpc_arch_ops = xpc_arch_ops_sn2;
if (offsetof(struct xpc_msg_sn2, payload) > XPC_MSG_HDR_MAX_SIZE) {
dev_err(xpc_part, "header portion of struct xpc_msg_sn2 is "
};
#endif
-static atomic64_t xpc_heartbeat_uv;
-static DECLARE_BITMAP(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
+static struct xpc_heartbeat_uv *xpc_heartbeat_uv;
#define XPC_ACTIVATE_MSG_SIZE_UV (1 * GRU_CACHE_LINE_BYTES)
#define XPC_ACTIVATE_MQ_SIZE_UV (4 * XP_MAX_NPARTITIONS_UV * \
static struct xpc_gru_mq_uv *xpc_notify_mq_uv;
static int
-xpc_setup_partitions_sn_uv(void)
+xpc_setup_partitions_uv(void)
{
short partid;
struct xpc_partition_uv *part_uv;
}
static void
-xpc_teardown_partitions_sn_uv(void)
+xpc_teardown_partitions_uv(void)
{
short partid;
struct xpc_partition_uv *part_uv;
/* syncing of remote_act_state was just done above */
break;
- case XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
- break;
- }
- case XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
-
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
- part_uv->flags |= XPC_P_HEARTBEAT_OFFLINE_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
- break;
- }
- case XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV: {
- struct xpc_activate_mq_msg_heartbeat_req_uv *msg;
-
- msg = container_of(msg_hdr,
- struct xpc_activate_mq_msg_heartbeat_req_uv,
- hdr);
- part_uv->heartbeat = msg->heartbeat;
-
- spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
- part_uv->flags &= ~XPC_P_HEARTBEAT_OFFLINE_UV;
- spin_unlock_irqrestore(&part_uv->flags_lock, irq_flags);
- break;
- }
case XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV: {
struct xpc_activate_mq_msg_activate_req_uv *msg;
part_uv->act_state_req = XPC_P_ASR_ACTIVATE_UV;
part->remote_rp_pa = msg->rp_gpa; /* !!! _pa is _gpa */
part->remote_rp_ts_jiffies = msg_hdr->rp_ts_jiffies;
+ part_uv->heartbeat_gpa = msg->heartbeat_gpa;
if (msg->activate_gru_mq_desc_gpa !=
part_uv->activate_gru_mq_desc_gpa) {
xpc_wakeup_channel_mgr(part);
break;
}
+ case XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV: {
+ struct xpc_activate_mq_msg_chctl_opencomplete_uv *msg;
+
+ msg = container_of(msg_hdr, struct
+ xpc_activate_mq_msg_chctl_opencomplete_uv, hdr);
+ spin_lock_irqsave(&part->chctl_lock, irq_flags);
+ part->chctl.flags[msg->ch_number] |= XPC_CHCTL_OPENCOMPLETE;
+ spin_unlock_irqrestore(&part->chctl_lock, irq_flags);
+
+ xpc_wakeup_channel_mgr(part);
+ }
case XPC_ACTIVATE_MQ_MSG_MARK_ENGAGED_UV:
spin_lock_irqsave(&part_uv->flags_lock, irq_flags);
part_uv->flags |= XPC_P_ENGAGED_UV;
/*
* !!! Make our side think that the remote partition sent an activate
- * !!! message our way by doing what the activate IRQ handler would
+ * !!! mq message our way by doing what the activate IRQ handler would
* !!! do had one really been sent.
*/
}
static int
-xpc_setup_rsvd_page_sn_uv(struct xpc_rsvd_page *rp)
+xpc_setup_rsvd_page_uv(struct xpc_rsvd_page *rp)
{
- rp->sn.activate_gru_mq_desc_gpa =
+ xpc_heartbeat_uv =
+ &xpc_partitions[sn_partition_id].sn.uv.cached_heartbeat;
+ rp->sn.uv.heartbeat_gpa = uv_gpa(xpc_heartbeat_uv);
+ rp->sn.uv.activate_gru_mq_desc_gpa =
uv_gpa(xpc_activate_mq_uv->gru_mq_desc);
return 0;
}
static void
-xpc_send_heartbeat_uv(int msg_type)
+xpc_allow_hb_uv(short partid)
{
- short partid;
- struct xpc_partition *part;
- struct xpc_activate_mq_msg_heartbeat_req_uv msg;
-
- /*
- * !!! On uv we're broadcasting a heartbeat message every 5 seconds.
- * !!! Whereas on sn2 we're bte_copy'ng the heartbeat info every 20
- * !!! seconds. This is an increase in numalink traffic.
- * ??? Is this good?
- */
-
- msg.heartbeat = atomic64_inc_return(&xpc_heartbeat_uv);
-
- partid = find_first_bit(xpc_heartbeating_to_mask_uv,
- XP_MAX_NPARTITIONS_UV);
-
- while (partid < XP_MAX_NPARTITIONS_UV) {
- part = &xpc_partitions[partid];
+}
- xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
- msg_type);
+static void
+xpc_disallow_hb_uv(short partid)
+{
+}
- partid = find_next_bit(xpc_heartbeating_to_mask_uv,
- XP_MAX_NPARTITIONS_UV, partid + 1);
- }
+static void
+xpc_disallow_all_hbs_uv(void)
+{
}
static void
xpc_increment_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_INC_HEARTBEAT_UV);
+ xpc_heartbeat_uv->value++;
}
static void
xpc_offline_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+ xpc_increment_heartbeat_uv();
+ xpc_heartbeat_uv->offline = 1;
}
static void
xpc_online_heartbeat_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_ONLINE_HEARTBEAT_UV);
+ xpc_increment_heartbeat_uv();
+ xpc_heartbeat_uv->offline = 0;
}
static void
xpc_heartbeat_init_uv(void)
{
- atomic64_set(&xpc_heartbeat_uv, 0);
- bitmap_zero(xpc_heartbeating_to_mask_uv, XP_MAX_NPARTITIONS_UV);
- xpc_heartbeating_to_mask = &xpc_heartbeating_to_mask_uv[0];
+ xpc_heartbeat_uv->value = 1;
+ xpc_heartbeat_uv->offline = 0;
}
static void
xpc_heartbeat_exit_uv(void)
{
- xpc_send_heartbeat_uv(XPC_ACTIVATE_MQ_MSG_OFFLINE_HEARTBEAT_UV);
+ xpc_offline_heartbeat_uv();
}
static enum xp_retval
xpc_get_remote_heartbeat_uv(struct xpc_partition *part)
{
struct xpc_partition_uv *part_uv = &part->sn.uv;
- enum xp_retval ret = xpNoHeartbeat;
+ enum xp_retval ret;
- if (part_uv->remote_act_state != XPC_P_AS_INACTIVE &&
- part_uv->remote_act_state != XPC_P_AS_DEACTIVATING) {
+ ret = xp_remote_memcpy(uv_gpa(&part_uv->cached_heartbeat),
+ part_uv->heartbeat_gpa,
+ sizeof(struct xpc_heartbeat_uv));
+ if (ret != xpSuccess)
+ return ret;
- if (part_uv->heartbeat != part->last_heartbeat ||
- (part_uv->flags & XPC_P_HEARTBEAT_OFFLINE_UV)) {
+ if (part_uv->cached_heartbeat.value == part->last_heartbeat &&
+ !part_uv->cached_heartbeat.offline) {
- part->last_heartbeat = part_uv->heartbeat;
- ret = xpSuccess;
- }
+ ret = xpNoHeartbeat;
+ } else {
+ part->last_heartbeat = part_uv->cached_heartbeat.value;
}
return ret;
}
part->remote_rp_pa = remote_rp_gpa; /* !!! _pa here is really _gpa */
part->remote_rp_ts_jiffies = remote_rp->ts_jiffies;
+ part->sn.uv.heartbeat_gpa = remote_rp->sn.uv.heartbeat_gpa;
part->sn.uv.activate_gru_mq_desc_gpa =
- remote_rp->sn.activate_gru_mq_desc_gpa;
+ remote_rp->sn.uv.activate_gru_mq_desc_gpa;
/*
* ??? Is it a good idea to make this conditional on what is
*/
if (part->sn.uv.remote_act_state == XPC_P_AS_INACTIVE) {
msg.rp_gpa = uv_gpa(xpc_rsvd_page);
+ msg.heartbeat_gpa = xpc_rsvd_page->sn.uv.heartbeat_gpa;
msg.activate_gru_mq_desc_gpa =
- xpc_rsvd_page->sn.activate_gru_mq_desc_gpa;
+ xpc_rsvd_page->sn.uv.activate_gru_mq_desc_gpa;
xpc_send_activate_IRQ_part_uv(part, &msg, sizeof(msg),
XPC_ACTIVATE_MQ_MSG_ACTIVATE_REQ_UV);
}
* Setup the channel structures that are uv specific.
*/
static enum xp_retval
-xpc_setup_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_setup_ch_structures_uv(struct xpc_partition *part)
{
struct xpc_channel_uv *ch_uv;
int ch_number;
* Teardown the channel structures that are uv specific.
*/
static void
-xpc_teardown_ch_structures_sn_uv(struct xpc_partition *part)
+xpc_teardown_ch_structures_uv(struct xpc_partition *part)
{
/* nothing needs to be done */
return;
XPC_ACTIVATE_MQ_MSG_CHCTL_OPENREPLY_UV);
}
+static void
+xpc_send_chctl_opencomplete_uv(struct xpc_channel *ch, unsigned long *irq_flags)
+{
+ struct xpc_activate_mq_msg_chctl_opencomplete_uv msg;
+
+ msg.ch_number = ch->number;
+ xpc_send_activate_IRQ_ch_uv(ch, irq_flags, &msg, sizeof(msg),
+ XPC_ACTIVATE_MQ_MSG_CHCTL_OPENCOMPLETE_UV);
+}
+
static void
xpc_send_chctl_local_msgrequest_uv(struct xpc_partition *part, int ch_number)
{
msg->hdr.msg_slot_number += ch->remote_nentries;
}
+static struct xpc_arch_operations xpc_arch_ops_uv = {
+ .setup_partitions = xpc_setup_partitions_uv,
+ .teardown_partitions = xpc_teardown_partitions_uv,
+ .process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv,
+ .get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv,
+ .setup_rsvd_page = xpc_setup_rsvd_page_uv,
+
+ .allow_hb = xpc_allow_hb_uv,
+ .disallow_hb = xpc_disallow_hb_uv,
+ .disallow_all_hbs = xpc_disallow_all_hbs_uv,
+ .increment_heartbeat = xpc_increment_heartbeat_uv,
+ .offline_heartbeat = xpc_offline_heartbeat_uv,
+ .online_heartbeat = xpc_online_heartbeat_uv,
+ .heartbeat_init = xpc_heartbeat_init_uv,
+ .heartbeat_exit = xpc_heartbeat_exit_uv,
+ .get_remote_heartbeat = xpc_get_remote_heartbeat_uv,
+
+ .request_partition_activation =
+ xpc_request_partition_activation_uv,
+ .request_partition_reactivation =
+ xpc_request_partition_reactivation_uv,
+ .request_partition_deactivation =
+ xpc_request_partition_deactivation_uv,
+ .cancel_partition_deactivation_request =
+ xpc_cancel_partition_deactivation_request_uv,
+
+ .setup_ch_structures = xpc_setup_ch_structures_uv,
+ .teardown_ch_structures = xpc_teardown_ch_structures_uv,
+
+ .make_first_contact = xpc_make_first_contact_uv,
+
+ .get_chctl_all_flags = xpc_get_chctl_all_flags_uv,
+ .send_chctl_closerequest = xpc_send_chctl_closerequest_uv,
+ .send_chctl_closereply = xpc_send_chctl_closereply_uv,
+ .send_chctl_openrequest = xpc_send_chctl_openrequest_uv,
+ .send_chctl_openreply = xpc_send_chctl_openreply_uv,
+ .send_chctl_opencomplete = xpc_send_chctl_opencomplete_uv,
+ .process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv,
+
+ .save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv,
+
+ .setup_msg_structures = xpc_setup_msg_structures_uv,
+ .teardown_msg_structures = xpc_teardown_msg_structures_uv,
+
+ .indicate_partition_engaged = xpc_indicate_partition_engaged_uv,
+ .indicate_partition_disengaged = xpc_indicate_partition_disengaged_uv,
+ .assume_partition_disengaged = xpc_assume_partition_disengaged_uv,
+ .partition_engaged = xpc_partition_engaged_uv,
+ .any_partition_engaged = xpc_any_partition_engaged_uv,
+
+ .n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv,
+ .send_payload = xpc_send_payload_uv,
+ .get_deliverable_payload = xpc_get_deliverable_payload_uv,
+ .received_payload = xpc_received_payload_uv,
+ .notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv,
+};
+
int
xpc_init_uv(void)
{
- xpc_setup_partitions_sn = xpc_setup_partitions_sn_uv;
- xpc_teardown_partitions_sn = xpc_teardown_partitions_sn_uv;
- xpc_process_activate_IRQ_rcvd = xpc_process_activate_IRQ_rcvd_uv;
- xpc_get_partition_rsvd_page_pa = xpc_get_partition_rsvd_page_pa_uv;
- xpc_setup_rsvd_page_sn = xpc_setup_rsvd_page_sn_uv;
- xpc_increment_heartbeat = xpc_increment_heartbeat_uv;
- xpc_offline_heartbeat = xpc_offline_heartbeat_uv;
- xpc_online_heartbeat = xpc_online_heartbeat_uv;
- xpc_heartbeat_init = xpc_heartbeat_init_uv;
- xpc_heartbeat_exit = xpc_heartbeat_exit_uv;
- xpc_get_remote_heartbeat = xpc_get_remote_heartbeat_uv;
-
- xpc_request_partition_activation = xpc_request_partition_activation_uv;
- xpc_request_partition_reactivation =
- xpc_request_partition_reactivation_uv;
- xpc_request_partition_deactivation =
- xpc_request_partition_deactivation_uv;
- xpc_cancel_partition_deactivation_request =
- xpc_cancel_partition_deactivation_request_uv;
-
- xpc_setup_ch_structures_sn = xpc_setup_ch_structures_sn_uv;
- xpc_teardown_ch_structures_sn = xpc_teardown_ch_structures_sn_uv;
-
- xpc_make_first_contact = xpc_make_first_contact_uv;
-
- xpc_get_chctl_all_flags = xpc_get_chctl_all_flags_uv;
- xpc_send_chctl_closerequest = xpc_send_chctl_closerequest_uv;
- xpc_send_chctl_closereply = xpc_send_chctl_closereply_uv;
- xpc_send_chctl_openrequest = xpc_send_chctl_openrequest_uv;
- xpc_send_chctl_openreply = xpc_send_chctl_openreply_uv;
-
- xpc_save_remote_msgqueue_pa = xpc_save_remote_msgqueue_pa_uv;
-
- xpc_setup_msg_structures = xpc_setup_msg_structures_uv;
- xpc_teardown_msg_structures = xpc_teardown_msg_structures_uv;
-
- xpc_indicate_partition_engaged = xpc_indicate_partition_engaged_uv;
- xpc_indicate_partition_disengaged =
- xpc_indicate_partition_disengaged_uv;
- xpc_assume_partition_disengaged = xpc_assume_partition_disengaged_uv;
- xpc_partition_engaged = xpc_partition_engaged_uv;
- xpc_any_partition_engaged = xpc_any_partition_engaged_uv;
-
- xpc_n_of_deliverable_payloads = xpc_n_of_deliverable_payloads_uv;
- xpc_process_msg_chctl_flags = xpc_process_msg_chctl_flags_uv;
- xpc_send_payload = xpc_send_payload_uv;
- xpc_notify_senders_of_disconnect = xpc_notify_senders_of_disconnect_uv;
- xpc_get_deliverable_payload = xpc_get_deliverable_payload_uv;
- xpc_received_payload = xpc_received_payload_uv;
+ xpc_arch_ops = xpc_arch_ops_uv;
if (sizeof(struct xpc_notify_mq_msghdr_uv) > XPC_MSG_HDR_MAX_SIZE) {
dev_err(xpc_part, "xpc_notify_mq_msghdr_uv is larger than %d\n",
brq.stop.flags = MMC_RSP_SPI_R1B | MMC_RSP_R1B | MMC_CMD_AC;
brq.data.blocks = req->nr_sectors;
+ /*
+ * The block layer doesn't support all sector count
+ * restrictions, so we need to be prepared for too big
+ * requests.
+ */
+ if (brq.data.blocks > card->host->max_blk_count)
+ brq.data.blocks = card->host->max_blk_count;
+
/*
* After a read error, we redo the request one sector at a time
* in order to accurately determine which sectors can be read
* This delay should be sufficient to allow the power supply
* to reach the minimum voltage.
*/
- mmc_delay(2);
+ mmc_delay(10);
host->ios.clock = host->f_min;
host->ios.power_mode = MMC_POWER_ON;
* This delay must be at least 74 clock sizes, or 1 ms, or the
* time required to reach a stable voltage.
*/
- mmc_delay(2);
+ mmc_delay(10);
}
static void mmc_power_off(struct mmc_host *host)
}
host = mmc_priv(mmc);
+ host->mmc = mmc;
/* Bits 12 thru 19 is the designer */
host->hw_designer = (dev->periphid >> 12) & 0xff;
/* Bits 20 thru 23 is the revison */
host->mclk = clk_get_rate(host->clk);
DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
}
- host->mmc = mmc;
host->base = ioremap(dev->res.start, SZ_4K);
if (!host->base) {
ret = -ENOMEM;
}
#ifdef CONFIG_PM
-static int mvsd_suspend(struct platform_device *dev, pm_message_t state,
- u32 level)
+static int mvsd_suspend(struct platform_device *dev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
- if (mmc && level == SUSPEND_DISABLE)
+ if (mmc)
ret = mmc_suspend_host(mmc, state);
return ret;
}
-static int mvsd_resume(struct platform_device *dev, u32 level)
+static int mvsd_resume(struct platform_device *dev)
{
- struct mmc_host *mmc = platform_dev_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
- if (mmc && level == RESUME_ENABLE)
+ if (mmc)
ret = mmc_resume_host(mmc);
return ret;
struct timer_list dma_timer;
unsigned dma_len;
- short power_pin;
-
struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS];
struct mmc_omap_slot *current_slot;
spinlock_t slot_lock;
host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot));
if (IS_ERR(host)) {
- ret = PTR_ERR(host);
- goto unmap;
+ dev_err(&pdev->dev, "cannot allocate host\n");
+ return ERR_PTR(PTR_ERR(host));
}
slot = sdhci_priv(host);
ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
if (ret) {
dev_err(&pdev->dev, "cannot request region\n");
- return ERR_PTR(ret);
+ goto free;
}
addr = pci_resource_start(pdev, bar);
release:
pci_release_region(pdev, bar);
+
+free:
sdhci_free_host(host);
return ERR_PTR(ret);
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
- SDHCI_INT_DATA_END_BIT)
+ SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR)
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
#define SDHCI_ACMD12_ERR 0x3C
#define SR_SRWD 0x80 /* SR write protect */
/* Define max times to check status register before we give up. */
-#define MAX_READY_WAIT_COUNT 100000
+#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */
#define CMD_SIZE 4
#ifdef CONFIG_M25PXX_USE_FAST_READ
*/
static int wait_till_ready(struct m25p *flash)
{
- int count;
+ unsigned long deadline;
int sr;
- /* one chip guarantees max 5 msec wait here after page writes,
- * but potentially three seconds (!) after page erase.
- */
- for (count = 0; count < MAX_READY_WAIT_COUNT; count++) {
+ deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+
+ do {
if ((sr = read_sr(flash)) < 0)
break;
else if (!(sr & SR_WIP))
return 0;
- /* REVISIT sometimes sleeping would be best */
- }
+ cond_resched();
+
+ } while (!time_after_eq(jiffies, deadline));
return 1;
}
mutex_lock(&flash->lock);
/* whole-chip erase? */
- if (len == flash->mtd.size && erase_chip(flash)) {
- instr->state = MTD_ERASE_FAILED;
- mutex_unlock(&flash->lock);
- return -EIO;
+ if (len == flash->mtd.size) {
+ if (erase_chip(flash)) {
+ instr->state = MTD_ERASE_FAILED;
+ mutex_unlock(&flash->lock);
+ return -EIO;
+ }
/* REVISIT in some cases we could speed up erasing large regions
* by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up
*/
static void mtd_release(struct device *dev)
{
- struct mtd_info *mtd = dev_to_mtd(dev);
+ dev_t index = MTD_DEVT(dev_to_mtd(dev)->index);
/* remove /dev/mtdXro node if needed */
- if (MTD_DEVT(mtd->index))
- device_destroy(mtd_class, MTD_DEVT(mtd->index) + 1);
+ if (index)
+ device_destroy(mtd_class, index + 1);
}
static ssize_t mtd_type_show(struct device *dev,
}
static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL);
+static ssize_t mtd_subpagesize_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mtd_info *mtd = dev_to_mtd(dev);
+ unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize);
+
+}
+static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL);
+
static ssize_t mtd_oobsize_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
&dev_attr_size.attr,
&dev_attr_erasesize.attr,
&dev_attr_writesize.attr,
+ &dev_attr_subpagesize.attr,
&dev_attr_oobsize.attr,
&dev_attr_numeraseregions.attr,
&dev_attr_name.attr,
ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (ret < 0) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return ret;
}
cafe->ctl1 &= ~CTRL1_CHIPSELECT;
}
-static int cafe_nand_interrupt(int irq, void *id)
+static irqreturn_t cafe_nand_interrupt(int irq, void *id)
{
struct mtd_info *mtd = id;
struct cafe_priv *cafe = mtd->priv;
struct ep93xx_priv
{
struct resource *res;
- void *base_addr;
+ void __iomem *base_addr;
int irq;
struct ep93xx_descs *descs;
* various kernel subsystems to support the mechanics required by a
* fixed-high-32-bit system.
*/
- if ((pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) ||
- (pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK) != 0)) {
+ if ((pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) != 0) ||
+ (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)) != 0)) {
dev_err(&pdev->dev, "No usable DMA configuration,aborting\n");
goto err_dma;
}
be_msix_enable(adapter);
- status = pci_set_dma_mask(pdev, DMA_64BIT_MASK);
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
if (!status) {
netdev->features |= NETIF_F_HIGHDMA;
} else {
- status = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ status = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (status) {
dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
goto free_netdev;
jme_pci_dma64(struct pci_dev *pdev)
{
if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
- !pci_set_dma_mask(pdev, DMA_64BIT_MASK))
- if (!pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
return 1;
if (pdev->device == PCI_DEVICE_ID_JMICRON_JMC250 &&
- !pci_set_dma_mask(pdev, DMA_40BIT_MASK))
- if (!pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK))
+ !pci_set_dma_mask(pdev, DMA_BIT_MASK(40)))
+ if (!pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40)))
return 1;
if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32)))
if (err) {
mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn);
goto out;
- return err;
}
qp->event = mlx4_en_sqp_event;
nreq = err;
goto retry;
}
-
+ kfree(entries);
goto no_msi;
}
/* Copy the key to the user buffer */
dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf));
- memcpy(extra, buf, dwrq->length);
+ if (dwrq->length != -1)
+ memcpy(extra, buf, dwrq->length);
+ else
+ dwrq->length = 0;
return 0;
}
/* Copy the key to the user buffer */
ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
- memcpy(extra, buf, ext->key_len);
+ if (ext->key_len != -1)
+ memcpy(extra, buf, ext->key_len);
+ else
+ ext->key_len = 0;
return 0;
}
* Prototypes - MAC 802.11 stack related functions
*/
static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
static int ath5k_reset_wake(struct ath5k_softc *sc);
static int ath5k_start(struct ieee80211_hw *hw);
static void ath5k_stop(struct ieee80211_hw *hw);
if (chan->center_freq != sc->curchan->center_freq ||
chan->hw_value != sc->curchan->hw_value) {
- sc->curchan = chan;
- sc->curband = &sc->sbands[chan->band];
-
/*
* To switch channels clear any pending DMA operations;
* wait long enough for the RX fifo to drain, reset the
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- return ath5k_reset(sc, true, true);
+ return ath5k_reset(sc, chan);
}
return 0;
sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
AR5K_INT_FATAL | AR5K_INT_GLOBAL;
- ret = ath5k_reset(sc, false, false);
+ ret = ath5k_reset(sc, NULL);
if (ret)
goto done;
return NETDEV_TX_OK;
}
+/*
+ * Reset the hardware. If chan is not NULL, then also pause rx/tx
+ * and change to the given channel.
+ */
static int
-ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
+ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
{
struct ath5k_hw *ah = sc->ah;
int ret;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
- if (stop) {
+ if (chan) {
ath5k_hw_set_imr(ah, 0);
ath5k_txq_cleanup(sc);
ath5k_rx_stop(sc);
+
+ sc->curchan = chan;
+ sc->curband = &sc->sbands[chan->band];
}
ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
if (ret) {
{
int ret;
- ret = ath5k_reset(sc, true, true);
+ ret = ath5k_reset(sc, sc->curchan);
if (!ret)
ieee80211_wake_queues(sc->hw);
if (pci_enable_device(pdev))
return -EIO;
- ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
goto bad;
}
- ret = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA consistent "
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
};
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
};
{IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)},
{IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)},
{IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)},
+ {IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000_2agn_cfg)},
{IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)},
+ {IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000_2agn_cfg)},
{IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)},
{IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)},
{IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)},
goto err_disable_dev;
}
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) ||
- pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) ||
+ pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
dev_err(&pdev->dev, "No suitable DMA available\n");
goto err_free_reg;
}
__le64 buf;
struct sk_buff_head queue;
} b_tx_status; /* This queue is used by both -b and non-b devices */
+ struct mutex io_mutex;
+ union {
+ u8 bits8;
+ __le16 bits16;
+ __le32 bits32;
+ } *io_dmabuf;
};
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
{
u8 val;
+ mutex_lock(&priv->io_mutex);
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+ val = priv->io_dmabuf->bits8;
+ mutex_unlock(&priv->io_mutex);
return val;
}
{
__le16 val;
+ mutex_lock(&priv->io_mutex);
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+ val = priv->io_dmabuf->bits16;
+ mutex_unlock(&priv->io_mutex);
return le16_to_cpu(val);
}
{
__le32 val;
+ mutex_lock(&priv->io_mutex);
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+ val = priv->io_dmabuf->bits32;
+ mutex_unlock(&priv->io_mutex);
return le32_to_cpu(val);
}
static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv,
u8 *addr, u8 val, u8 idx)
{
+ mutex_lock(&priv->io_mutex);
+
+ priv->io_dmabuf->bits8 = val;
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
}
static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv,
__le16 *addr, u16 val, u8 idx)
{
- __le16 buf = cpu_to_le16(val);
+ mutex_lock(&priv->io_mutex);
+ priv->io_dmabuf->bits16 = cpu_to_le16(val);
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
- HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
}
static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv,
__le32 *addr, u32 val, u8 idx)
{
- __le32 buf = cpu_to_le32(val);
+ mutex_lock(&priv->io_mutex);
+ priv->io_dmabuf->bits32 = cpu_to_le32(val);
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
- HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
}
static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr,
priv = dev->priv;
priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
+ /* allocate "DMA aware" buffer for register accesses */
+ priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL);
+ if (!priv->io_dmabuf) {
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+ mutex_init(&priv->io_mutex);
+
SET_IEEE80211_DEV(dev, &intf->dev);
usb_set_intfdata(intf, dev);
priv->udev = udev;
err = ieee80211_register_hw(dev);
if (err) {
printk(KERN_ERR "rtl8187: Cannot register device\n");
- goto err_free_dev;
+ goto err_free_dmabuf;
}
mutex_init(&priv->conf_mutex);
skb_queue_head_init(&priv->b_tx_status.queue);
return 0;
+ err_free_dmabuf:
+ kfree(priv->io_dmabuf);
err_free_dev:
ieee80211_free_hw(dev);
usb_set_intfdata(intf, NULL);
priv = dev->priv;
usb_reset_device(priv->udev);
usb_put_dev(interface_to_usbdev(intf));
+ kfree(priv->io_dmabuf);
ieee80211_free_hw(dev);
}
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
udelay(10);
+ mutex_lock(&priv->io_mutex);
+
+ priv->io_dmabuf->bits16 = data;
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- addr, 0x8225, &data, sizeof(data), HZ / 2);
+ addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
+ HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
udelay(10);
0 /*base_hi*/,
PAR_IRQ,
PARPORT_DMA_NONE /* dma */,
- NULL /*struct pci_dev* */) )
+ NULL /*struct pci_dev* */),
+ 0 /* shared irq flags */ )
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
#endif /* CONFIG_PARPORT_PC */
* pci_write_vpd - Write entry to Vital Product Data
* @dev: pci device struct
* @pos: offset in vpd space
- * @count: number of bytes to read
- * @val: value to write
+ * @count: number of bytes to write
+ * @buf: buffer containing write data
*
*/
ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
/**
* ht_destroy_irq - destroy an irq created with ht_create_irq
+ * @irq: irq to be destroyed
*
* This reverses ht_create_irq removing the specified irq from
* existence. The irq should be free before this happens.
#define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32))
#define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64))
+#ifndef PHYSICAL_PAGE_MASK
+#define PHYSICAL_PAGE_MASK PAGE_MASK
+#endif
+
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
if (!r->flags || !(r->flags & IORESOURCE_MEM))
continue;
addr = r->start;
- addr &= PAGE_MASK;
+ addr &= PHYSICAL_PAGE_MASK;
size = r->end - addr;
size = PAGE_ALIGN(size);
iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
* is not a big problem
*/
ret = domain_page_mapping(domain, start_paddr,
- ((u64)paddr) & PAGE_MASK, size, prot);
+ ((u64)paddr) & PHYSICAL_PAGE_MASK,
+ size, prot);
if (ret)
goto error;
addr = page_to_phys(sg_page(sg)) + sg->offset;
size = aligned_size((u64)addr, sg->length);
ret = domain_page_mapping(domain, start_addr + offset,
- ((u64)addr) & PAGE_MASK,
- size, prot);
+ ((u64)addr) & PHYSICAL_PAGE_MASK,
+ size, prot);
if (ret) {
/* clear the page */
dma_pte_clear_range(domain, start_addr,
/**
* pci_read_legacy_io - read byte(s) from legacy I/O port space
* @kobj: kobject corresponding to file to read from
+ * @bin_attr: struct bin_attribute for this file
* @buf: buffer to store results
* @off: offset into legacy I/O port space
* @count: number of bytes to read
/**
* pci_write_legacy_io - write byte(s) to legacy I/O port space
* @kobj: kobject corresponding to file to read from
+ * @bin_attr: struct bin_attribute for this file
* @buf: buffer containing value to be written
* @off: offset into legacy I/O port space
* @count: number of bytes to write
/**
* pci_remove_resource_files - cleanup resource files
- * @dev: dev to cleanup
+ * @pdev: dev to cleanup
*
- * If we created resource files for @dev, remove them from sysfs and
+ * If we created resource files for @pdev, remove them from sysfs and
* free their resources.
*/
static void
/**
* pci_create_resource_files - create resource files in sysfs for @dev
- * @dev: dev in question
+ * @pdev: dev in question
*
- * Walk the resources in @dev creating files for each resource available.
+ * Walk the resources in @pdev creating files for each resource available.
*/
static int pci_create_resource_files(struct pci_dev *pdev)
{
/**
* pci_write_rom - used to enable access to the PCI ROM display
* @kobj: kernel object handle
+ * @bin_attr: struct bin_attribute for this file
* @buf: user input
* @off: file offset
* @count: number of byte in input
/**
* pci_read_rom - read a PCI ROM
* @kobj: kernel object handle
+ * @bin_attr: struct bin_attribute for this file
* @buf: where to put the data we read from the ROM
* @off: file offset
* @count: number of bytes to read
#define PCI_EXP_SAVE_REGS 7
+#define pcie_cap_has_devctl(type, flags) 1
+#define pcie_cap_has_lnkctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ (type == PCI_EXP_TYPE_ROOT_PORT || \
+ type == PCI_EXP_TYPE_ENDPOINT || \
+ type == PCI_EXP_TYPE_LEG_END))
+#define pcie_cap_has_sltctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ ((type == PCI_EXP_TYPE_ROOT_PORT) || \
+ (type == PCI_EXP_TYPE_DOWNSTREAM && \
+ (flags & PCI_EXP_FLAGS_SLOT))))
+#define pcie_cap_has_rtctl(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1 || \
+ (type == PCI_EXP_TYPE_ROOT_PORT || \
+ type == PCI_EXP_TYPE_RC_EC))
+#define pcie_cap_has_devctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_lnkctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+#define pcie_cap_has_sltctl2(type, flags) \
+ ((flags & PCI_EXP_FLAGS_VERS) > 1)
+
static int pci_save_pcie_state(struct pci_dev *dev)
{
int pos, i = 0;
struct pci_cap_saved_state *save_state;
u16 *cap;
+ u16 flags;
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
if (pos <= 0)
}
cap = (u16 *)&save_state->data[0];
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
- pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+ if (pcie_cap_has_devctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &cap[i++]);
+ if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL, &cap[i++]);
+ if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL, &cap[i++]);
+ if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &cap[i++]);
+ if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL2, &cap[i++]);
+ if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_LNKCTL2, &cap[i++]);
+ if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+ pci_read_config_word(dev, pos + PCI_EXP_SLTCTL2, &cap[i++]);
return 0;
}
int i = 0, pos;
struct pci_cap_saved_state *save_state;
u16 *cap;
+ u16 flags;
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_EXP);
pos = pci_find_capability(dev, PCI_CAP_ID_EXP);
return;
cap = (u16 *)&save_state->data[0];
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
- pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
+ pci_read_config_word(dev, pos + PCI_EXP_FLAGS, &flags);
+
+ if (pcie_cap_has_devctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, cap[i++]);
+ if (pcie_cap_has_lnkctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL, cap[i++]);
+ if (pcie_cap_has_sltctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL, cap[i++]);
+ if (pcie_cap_has_rtctl(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, cap[i++]);
+ if (pcie_cap_has_devctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL2, cap[i++]);
+ if (pcie_cap_has_lnkctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_LNKCTL2, cap[i++]);
+ if (pcie_cap_has_sltctl2(dev->pcie_type, flags))
+ pci_write_config_word(dev, pos + PCI_EXP_SLTCTL2, cap[i++]);
}
return max;
}
-void __attribute__((weak)) set_pci_bus_resources_arch_default(struct pci_bus *b)
-{
-}
-
struct pci_bus * pci_create_bus(struct device *parent,
int bus, struct pci_ops *ops, void *sysdata)
{
b->resource[0] = &ioport_resource;
b->resource[1] = &iomem_resource;
- set_pci_bus_resources_arch_default(b);
-
return b;
dev_create_file_err:
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3364, quirk_disable_all_msi);
/* Disable MSI on chipsets that are known to not support it */
static void __devinit quirk_disable_msi(struct pci_dev *dev)
for (i = 0; i < PCI_BUS_NUM_RESOURCES; i++) {
struct resource *res = bus->resource[i];
- if (!res)
+ if (!res || !res->end)
continue;
dev_printk(KERN_DEBUG, &bus->dev, "resource %d %s %pR\n", i,
- (res->flags & IORESOURCE_IO) ? "io: " : "mem:", res);
+ (res->flags & IORESOURCE_IO) ? "io: " :
+ ((res->flags & IORESOURCE_PREFETCH)? "pref mem":"mem:"),
+ res);
}
}
/**
* pci_renumber_slot - update %struct pci_slot -> number
- * @slot - %struct pci_slot to update
- * @slot_nr - new number for slot
+ * @slot: &struct pci_slot to update
+ * @slot_nr: new number for slot
*
* The primary purpose of this interface is to allow callers who earlier
* created a placeholder slot in pci_create_slot() by passing a -1 as
{
int ret;
+ if (!platform_scoop_config)
+ return -ENODEV;
+
sharpsl_pcmcia_ops.nr = platform_scoop_config->num_devs;
sharpsl_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
struct input_dev *key_dev = sony_laptop_input.key_dev;
struct sony_laptop_keypress kp = { NULL };
- if (event == SONYPI_EVENT_FNKEY_RELEASED) {
+ if (event == SONYPI_EVENT_FNKEY_RELEASED ||
+ event == SONYPI_EVENT_ANYBUTTON_RELEASED) {
/* Nothing, not all VAIOs generate this event */
return;
}
{ 0x05, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0x86, SONYPI_EVENT_PKEY_P5 },
{ 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
- { 0x06, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0x87, SONYPI_EVENT_SETTINGKEY_PRESSED },
{ 0x07, SONYPI_EVENT_ANYBUTTON_RELEASED },
{ 0, 0 },
sony_call_snc_handle(0x0100, 0, &result);
sony_call_snc_handle(0x0101, 0, &result);
sony_call_snc_handle(0x0102, 0x100, &result);
+ sony_call_snc_handle(0x0127, 0, &result);
return 0;
}
/* set the last requested brightness level */
if (sony_backlight_device &&
- !sony_backlight_update_status(sony_backlight_device))
+ sony_backlight_update_status(sony_backlight_device) < 0)
printk(KERN_WARNING DRV_PFX "unable to restore brightness level\n");
return 0;
err = rfkill_register(sony_wifi_rfkill);
if (err)
rfkill_free(sony_wifi_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_WIFI] = sony_wifi_rfkill;
+ sony_nc_rfkill_set(sony_wifi_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
err = rfkill_register(sony_bluetooth_rfkill);
if (err)
rfkill_free(sony_bluetooth_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_BLUETOOTH] = sony_bluetooth_rfkill;
+ sony_nc_rfkill_set(sony_bluetooth_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
err = rfkill_register(sony_wwan_rfkill);
if (err)
rfkill_free(sony_wwan_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_WWAN] = sony_wwan_rfkill;
+ sony_nc_rfkill_set(sony_wwan_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
err = rfkill_register(sony_wimax_rfkill);
if (err)
rfkill_free(sony_wimax_rfkill);
- else
+ else {
sony_rfkill_devices[SONY_WIMAX] = sony_wimax_rfkill;
+ sony_nc_rfkill_set(sony_wimax_rfkill->data,
+ RFKILL_STATE_UNBLOCKED);
+ }
return err;
}
* 02110-1301, USA.
*/
-#define TPACPI_VERSION "0.22"
+#define TPACPI_VERSION "0.23"
#define TPACPI_SYSFS_VERSION 0x020300
/*
static struct workqueue_struct *tpacpi_wq;
+enum led_status_t {
+ TPACPI_LED_OFF = 0,
+ TPACPI_LED_ON,
+ TPACPI_LED_BLINK,
+};
+
/* Special LED class that can defer work */
struct tpacpi_led_classdev {
struct led_classdev led_classdev;
struct work_struct work;
- enum led_brightness new_brightness;
+ enum led_status_t new_state;
unsigned int led;
};
return len;
}
-static void hotkey_enabledisable_warn(void)
+static void hotkey_enabledisable_warn(bool enable)
{
tpacpi_log_usertask("procfs hotkey enable/disable");
- WARN(1, TPACPI_WARN
- "hotkey enable/disable functionality has been "
- "removed from the driver. Hotkeys are always enabled.\n");
+ if (!WARN((tpacpi_lifecycle == TPACPI_LIFE_RUNNING || !enable),
+ TPACPI_WARN
+ "hotkey enable/disable functionality has been "
+ "removed from the driver. Hotkeys are always "
+ "enabled\n"))
+ printk(TPACPI_ERR
+ "Please remove the hotkey=enable module "
+ "parameter, it is deprecated. Hotkeys are always "
+ "enabled\n");
}
static int hotkey_write(char *buf)
res = 0;
while ((cmd = next_cmd(&buf))) {
if (strlencmp(cmd, "enable") == 0) {
- hotkey_enabledisable_warn();
+ hotkey_enabledisable_warn(1);
} else if (strlencmp(cmd, "disable") == 0) {
- hotkey_enabledisable_warn();
+ hotkey_enabledisable_warn(0);
res = -EPERM;
} else if (strlencmp(cmd, "reset") == 0) {
mask = hotkey_orig_mask;
container_of(work, struct tpacpi_led_classdev, work);
if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
- light_set_status((data->new_brightness != LED_OFF));
+ light_set_status((data->new_state != TPACPI_LED_OFF));
}
static void light_sysfs_set(struct led_classdev *led_cdev,
container_of(led_cdev,
struct tpacpi_led_classdev,
led_classdev);
- data->new_brightness = brightness;
+ data->new_state = (brightness != LED_OFF) ?
+ TPACPI_LED_ON : TPACPI_LED_OFF;
queue_work(tpacpi_wq, &data->work);
}
TPACPI_LED_EC_HLMS = 0x0e, /* EC reg to select led to command */
};
-enum led_status_t {
- TPACPI_LED_OFF = 0,
- TPACPI_LED_ON,
- TPACPI_LED_BLINK,
-};
-
static enum led_access_mode led_supported;
TPACPI_HANDLE(led, ec, "SLED", /* 570 */
return rc;
}
-static void led_sysfs_set_status(unsigned int led,
- enum led_brightness brightness)
-{
- led_set_status(led,
- (brightness == LED_OFF) ?
- TPACPI_LED_OFF :
- (tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ?
- TPACPI_LED_BLINK : TPACPI_LED_ON);
-}
-
static void led_set_status_worker(struct work_struct *work)
{
struct tpacpi_led_classdev *data =
container_of(work, struct tpacpi_led_classdev, work);
if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
- led_sysfs_set_status(data->led, data->new_brightness);
+ led_set_status(data->led, data->new_state);
}
static void led_sysfs_set(struct led_classdev *led_cdev,
struct tpacpi_led_classdev *data = container_of(led_cdev,
struct tpacpi_led_classdev, led_classdev);
- data->new_brightness = brightness;
+ if (brightness == LED_OFF)
+ data->new_state = TPACPI_LED_OFF;
+ else if (tpacpi_led_state_cache[data->led] != TPACPI_LED_BLINK)
+ data->new_state = TPACPI_LED_ON;
+ else
+ data->new_state = TPACPI_LED_BLINK;
+
queue_work(tpacpi_wq, &data->work);
}
} else if ((*delay_on != 500) || (*delay_off != 500))
return -EINVAL;
- data->new_brightness = TPACPI_LED_BLINK;
+ data->new_state = TPACPI_LED_BLINK;
queue_work(tpacpi_wq, &data->work);
return 0;
MODULE_ALIAS(TPACPI_DRVR_SHORTNAME);
+/*
+ * This will autoload the driver in almost every ThinkPad
+ * in widespread use.
+ *
+ * Only _VERY_ old models, like the 240, 240x and 570 lack
+ * the HKEY event interface.
+ */
+MODULE_DEVICE_TABLE(acpi, ibm_htk_device_ids);
+
/*
* DMI matching for module autoloading
*
#define IBM_BIOS_MODULE_ALIAS(__type) \
MODULE_ALIAS("dmi:bvnIBM:bvr" __type "ET??WW*")
-/* Non-ancient thinkpads */
-MODULE_ALIAS("dmi:bvnIBM:*:svnIBM:*:pvrThinkPad*:rvnIBM:*");
-MODULE_ALIAS("dmi:bvnLENOVO:*:svnLENOVO:*:pvrThinkPad*:rvnLENOVO:*");
-
/* Ancient thinkpad BIOSes have to be identified by
* BIOS type or model number, and there are far less
* BIOS types than model numbers... */
-IBM_BIOS_MODULE_ALIAS("I[BDHIMNOTWVYZ]");
-IBM_BIOS_MODULE_ALIAS("1[0368A-GIKM-PST]");
-IBM_BIOS_MODULE_ALIAS("K[UX-Z]");
+IBM_BIOS_MODULE_ALIAS("I[MU]"); /* 570, 570e */
-MODULE_AUTHOR("Borislav Deianov, Henrique de Moraes Holschuh");
+MODULE_AUTHOR("Borislav Deianov <borislav@users.sf.net>");
+MODULE_AUTHOR("Henrique de Moraes Holschuh <hmh@hmh.eng.br>");
MODULE_DESCRIPTION(TPACPI_DESC);
MODULE_VERSION(TPACPI_VERSION);
MODULE_LICENSE("GPL");
static int bq24022_is_enabled(struct regulator_dev *rdev)
{
- struct platform_device *pdev = rdev_get_drvdata(rdev);
- struct bq24022_mach_info *pdata = pdev->dev.platform_data;
+ struct bq24022_mach_info *pdata = rdev_get_drvdata(rdev);
return !gpio_get_value(pdata->gpio_nce);
}
err = regulator_check_drms(rdev);
if (err < 0 || !rdev->desc->ops->get_optimum_mode ||
- !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode);
- return;
+ !rdev->desc->ops->get_voltage || !rdev->desc->ops->set_mode)
+ return;
/* get output voltage */
output_uV = rdev->desc->ops->get_voltage(rdev);
int cmin = constraints->min_uV;
int cmax = constraints->max_uV;
- /* it's safe to autoconfigure fixed-voltage supplies */
+ /* it's safe to autoconfigure fixed-voltage supplies
+ and the constraints are used by list_voltage. */
if (count == 1 && !cmin) {
- cmin = INT_MIN;
+ cmin = 1;
cmax = INT_MAX;
+ constraints->min_uV = cmin;
+ constraints->max_uV = cmax;
}
/* voltage constraints are optional */
if (regulator_desc->name == NULL || regulator_desc->ops == NULL)
return ERR_PTR(-EINVAL);
- if (!regulator_desc->type == REGULATOR_VOLTAGE &&
- !regulator_desc->type == REGULATOR_CURRENT)
+ if (regulator_desc->type != REGULATOR_VOLTAGE &&
+ regulator_desc->type != REGULATOR_CURRENT)
return ERR_PTR(-EINVAL);
if (!init_data)
scrub:
device_unregister(&rdev->dev);
+ /* device core frees rdev */
+ rdev = ERR_PTR(ret);
+ goto out;
+
clean:
kfree(rdev);
rdev = ERR_PTR(ret);
* sysfs_streq() doesn't need the \n's, but we add them so the strings
* will be shared with show_mode(), above.
*/
- if (sysfs_streq(buf, "fast\n") == 0)
+ if (sysfs_streq(buf, "fast\n"))
mode = REGULATOR_MODE_FAST;
- else if (sysfs_streq(buf, "normal\n") == 0)
+ else if (sysfs_streq(buf, "normal\n"))
mode = REGULATOR_MODE_NORMAL;
- else if (sysfs_streq(buf, "idle\n") == 0)
+ else if (sysfs_streq(buf, "idle\n"))
mode = REGULATOR_MODE_IDLE;
- else if (sysfs_streq(buf, "standby\n") == 0)
+ else if (sysfs_streq(buf, "standby\n"))
mode = REGULATOR_MODE_STANDBY;
else {
dev_err(dev, "Configuring invalid mode\n");
config RTC_DRV_SH
tristate "SuperH On-Chip RTC"
- depends on RTC_CLASS && SUPERH
+ depends on RTC_CLASS && SUPERH && HAVE_CLK
help
Say Y here to enable support for the on-chip RTC found in
most SuperH processors.
goto cleanup2;
}
- pr_info("%s: alarms up to one %s%s, %zd bytes nvram%s\n",
- dev_name(&cmos_rtc.rtc->dev),
- is_valid_irq(rtc_irq)
- ? (cmos_rtc.mon_alrm
- ? "year"
- : (cmos_rtc.day_alrm
- ? "month" : "day"))
- : "no",
- cmos_rtc.century ? ", y3k" : "",
- nvram.size,
- is_hpet_enabled() ? ", hpet irqs" : "");
+ pr_info("%s: %s%s, %zd bytes nvram%s\n",
+ dev_name(&cmos_rtc.rtc->dev),
+ !is_valid_irq(rtc_irq) ? "no alarms" :
+ cmos_rtc.mon_alrm ? "alarms up to one year" :
+ cmos_rtc.day_alrm ? "alarms up to one month" :
+ "alarms up to one day",
+ cmos_rtc.century ? ", y3k" : "",
+ nvram.size,
+ is_hpet_enabled() ? ", hpet irqs" : "");
return 0;
/*
* SuperH On-Chip RTC Support
*
- * Copyright (C) 2006, 2007, 2008 Paul Mundt
+ * Copyright (C) 2006 - 2009 Paul Mundt
* Copyright (C) 2006 Jamie Lenehan
* Copyright (C) 2008 Angelo Castello
*
#include <linux/spinlock.h>
#include <linux/io.h>
#include <linux/log2.h>
+#include <linux/clk.h>
#include <asm/rtc.h>
#define DRV_NAME "sh-rtc"
-#define DRV_VERSION "0.2.1"
+#define DRV_VERSION "0.2.2"
#define RTC_REG(r) ((r) * rtc_reg_size)
#define RCR2_START 0x01 /* Start bit */
struct sh_rtc {
- void __iomem *regbase;
- unsigned long regsize;
- struct resource *res;
- int alarm_irq;
- int periodic_irq;
- int carry_irq;
- struct rtc_device *rtc_dev;
- spinlock_t lock;
- unsigned long capabilities; /* See asm-sh/rtc.h for cap bits */
- unsigned short periodic_freq;
+ void __iomem *regbase;
+ unsigned long regsize;
+ struct resource *res;
+ int alarm_irq;
+ int periodic_irq;
+ int carry_irq;
+ struct clk *clk;
+ struct rtc_device *rtc_dev;
+ spinlock_t lock;
+ unsigned long capabilities; /* See asm/rtc.h for cap bits */
+ unsigned short periodic_freq;
};
static int __sh_rtc_interrupt(struct sh_rtc *rtc)
tmp = readb(rtc->regbase + RCR1);
- if (!enable)
- tmp &= ~RCR1_AIE;
- else
+ if (enable)
tmp |= RCR1_AIE;
+ else
+ tmp &= ~RCR1_AIE;
writeb(tmp, rtc->regbase + RCR1);
{
if (!is_power_of_2(freq))
return -EINVAL;
+
return sh_rtc_ioctl(dev, RTC_IRQP_SET, freq);
}
struct sh_rtc *rtc;
struct resource *res;
struct rtc_time r;
- int ret;
+ char clk_name[6];
+ int clk_id, ret;
rtc = kzalloc(sizeof(struct sh_rtc), GFP_KERNEL);
if (unlikely(!rtc))
dev_err(&pdev->dev, "No IRQ resource\n");
goto err_badres;
}
+
rtc->periodic_irq = ret;
rtc->carry_irq = platform_get_irq(pdev, 1);
rtc->alarm_irq = platform_get_irq(pdev, 2);
goto err_badres;
}
- rtc->regsize = res->end - res->start + 1;
+ rtc->regsize = resource_size(res);
rtc->res = request_mem_region(res->start, rtc->regsize, pdev->name);
if (unlikely(!rtc->res)) {
goto err_badmap;
}
+ clk_id = pdev->id;
+ /* With a single device, the clock id is still "rtc0" */
+ if (clk_id < 0)
+ clk_id = 0;
+
+ snprintf(clk_name, sizeof(clk_name), "rtc%d", clk_id);
+
+ rtc->clk = clk_get(&pdev->dev, clk_name);
+ if (IS_ERR(rtc->clk)) {
+ /*
+ * No error handling for rtc->clk intentionally, not all
+ * platforms will have a unique clock for the RTC, and
+ * the clk API can handle the struct clk pointer being
+ * NULL.
+ */
+ rtc->clk = NULL;
+ }
+
+ clk_enable(rtc->clk);
+
rtc->rtc_dev = rtc_device_register("sh", &pdev->dev,
&sh_rtc_ops, THIS_MODULE);
if (IS_ERR(rtc->rtc_dev)) {
return 0;
err_unmap:
+ clk_disable(rtc->clk);
+ clk_put(rtc->clk);
iounmap(rtc->regbase);
err_badmap:
release_resource(rtc->res);
sh_rtc_setcie(&pdev->dev, 0);
free_irq(rtc->periodic_irq, rtc);
+
if (rtc->carry_irq > 0) {
free_irq(rtc->carry_irq, rtc);
free_irq(rtc->alarm_irq, rtc);
iounmap(rtc->regbase);
+ clk_disable(rtc->clk);
+ clk_put(rtc->clk);
+
platform_set_drvdata(pdev, NULL);
kfree(rtc);
struct sh_rtc *rtc = platform_get_drvdata(pdev);
set_irq_wake(rtc->periodic_irq, enabled);
+
if (rtc->carry_irq > 0) {
set_irq_wake(rtc->carry_irq, enabled);
set_irq_wake(rtc->alarm_irq, enabled);
}
-
}
static int sh_rtc_suspend(struct device *dev)
{
irqstat = rtc_irq_bits;
- /* REVISIT alarm may need to wake us from sleep */
- mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
- BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+ mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
return 0;
}
#include <linux/slab.h>
#include <linux/buffer_head.h>
#include <linux/hdreg.h>
+#include <linux/async.h>
#include <asm/ccwdev.h>
#include <asm/ebcdic.h>
if (rc && rc != -EAGAIN)
device->target = device->state;
- if (device->state == device->target)
+ if (device->state == device->target) {
wake_up(&dasd_init_waitq);
+ dasd_put_device(device);
+ }
/* let user-space know that the device status changed */
kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE);
*/
void dasd_set_target_state(struct dasd_device *device, int target)
{
+ dasd_get_device(device);
/* If we are in probeonly mode stop at DASD_STATE_READY. */
if (dasd_probeonly && target > DASD_STATE_READY)
target = DASD_STATE_READY;
if (device->target != target) {
- if (device->state == target)
+ if (device->state == target) {
wake_up(&dasd_init_waitq);
+ dasd_put_device(device);
+ }
device->target = target;
}
if (device->state != device->target)
* SECTION: common functions for ccw_driver use
*/
+static void dasd_generic_auto_online(void *data, async_cookie_t cookie)
+{
+ struct ccw_device *cdev = data;
+ int ret;
+
+ ret = ccw_device_set_online(cdev);
+ if (ret)
+ pr_warning("%s: Setting the DASD online failed with rc=%d\n",
+ dev_name(&cdev->dev), ret);
+ else {
+ struct dasd_device *device = dasd_device_from_cdev(cdev);
+ wait_event(dasd_init_waitq, _wait_for_device(device));
+ dasd_put_device(device);
+ }
+}
+
/*
* Initial attempt at a probe function. this can be simplified once
* the other detection code is gone.
*/
if ((dasd_get_feature(cdev, DASD_FEATURE_INITIAL_ONLINE) > 0 ) ||
(dasd_autodetect && dasd_busid_known(dev_name(&cdev->dev)) != 0))
- ret = ccw_device_set_online(cdev);
- if (ret)
- pr_warning("%s: Setting the DASD online failed with rc=%d\n",
- dev_name(&cdev->dev), ret);
+ async_schedule(dasd_generic_auto_online, cdev);
return 0;
}
} else
pr_debug("dasd_generic device %s found\n",
dev_name(&cdev->dev));
-
- /* FIXME: we have to wait for the root device but we don't want
- * to wait for each single device but for all at once. */
- wait_event(dasd_init_waitq, _wait_for_device(device));
-
dasd_put_device(device);
-
return rc;
}
ccw++;
recid += count;
new_track = 0;
+ /* first idaw for a ccw may start anywhere */
+ if (!idaw_dst)
+ idaw_dst = dst;
}
- /* If we start a new idaw, everything is fine and the
- * start of the new idaw is the start of this segment.
+ /* If we start a new idaw, we must make sure that it
+ * starts on an IDA_BLOCK_SIZE boundary.
* If we continue an idaw, we must make sure that the
* current segment begins where the so far accumulated
* idaw ends
*/
- if (!idaw_dst)
- idaw_dst = dst;
+ if (!idaw_dst) {
+ if (__pa(dst) & (IDA_BLOCK_SIZE-1)) {
+ dasd_sfree_request(cqr, startdev);
+ return ERR_PTR(-ERANGE);
+ } else
+ idaw_dst = dst;
+ }
if ((idaw_dst + idaw_len) != dst) {
dasd_sfree_request(cqr, startdev);
return ERR_PTR(-ERANGE);
extern void tape_state_set(struct tape_device *, enum tape_state);
extern int tape_generic_online(struct tape_device *, struct tape_discipline *);
-extern int tape_generic_offline(struct tape_device *device);
+extern int tape_generic_offline(struct ccw_device *);
/* Externals from tape_devmap.c */
extern int tape_generic_probe(struct ccw_device *);
);
}
-static int
-tape_34xx_offline(struct ccw_device *cdev)
-{
- return tape_generic_offline(cdev->dev.driver_data);
-}
-
static struct ccw_driver tape_34xx_driver = {
.name = "tape_34xx",
.owner = THIS_MODULE,
.probe = tape_generic_probe,
.remove = tape_generic_remove,
.set_online = tape_34xx_online,
- .set_offline = tape_34xx_offline,
+ .set_offline = tape_generic_offline,
};
static int
&tape_discipline_3590);
}
-static int
-tape_3590_offline(struct ccw_device *cdev)
-{
- return tape_generic_offline(cdev->dev.driver_data);
-}
-
static struct ccw_driver tape_3590_driver = {
.name = "tape_3590",
.owner = THIS_MODULE,
.ids = tape_3590_ids,
.probe = tape_generic_probe,
.remove = tape_generic_remove,
- .set_offline = tape_3590_offline,
+ .set_offline = tape_generic_offline,
.set_online = tape_3590_online,
};
* Manual offline is only allowed while the drive is not in use.
*/
int
-tape_generic_offline(struct tape_device *device)
+tape_generic_offline(struct ccw_device *cdev)
{
+ struct tape_device *device;
+
+ device = cdev->dev.driver_data;
if (!device) {
return -ENODEV;
}
qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
}
-static void qdio_call_shutdown(struct work_struct *work)
-{
- struct ccw_device_private *priv;
- struct ccw_device *cdev;
-
- priv = container_of(work, struct ccw_device_private, kick_work);
- cdev = priv->cdev;
- qdio_shutdown(cdev, QDIO_FLAG_CLEANUP_USING_CLEAR);
- put_device(&cdev->dev);
-}
-
-static void qdio_int_error(struct ccw_device *cdev)
-{
- struct qdio_irq *irq_ptr = cdev->private->qdio_data;
-
- switch (irq_ptr->state) {
- case QDIO_IRQ_STATE_INACTIVE:
- case QDIO_IRQ_STATE_CLEANUP:
- qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
- break;
- case QDIO_IRQ_STATE_ESTABLISHED:
- case QDIO_IRQ_STATE_ACTIVE:
- qdio_set_state(irq_ptr, QDIO_IRQ_STATE_STOPPED);
- if (get_device(&cdev->dev)) {
- /* Can't call shutdown from interrupt context. */
- PREPARE_WORK(&cdev->private->kick_work,
- qdio_call_shutdown);
- queue_work(ccw_device_work, &cdev->private->kick_work);
- }
- break;
- default:
- WARN_ON(1);
- }
- wake_up(&cdev->private->wait_q);
-}
-
static int qdio_establish_check_errors(struct ccw_device *cdev, int cstat,
int dstat)
{
switch (PTR_ERR(irb)) {
case -EIO:
DBF_ERROR("%4x IO error", irq_ptr->schid.sch_no);
- return;
- case -ETIMEDOUT:
- DBF_ERROR("%4x IO timeout", irq_ptr->schid.sch_no);
- qdio_int_error(cdev);
+ qdio_set_state(irq_ptr, QDIO_IRQ_STATE_ERR);
+ wake_up(&cdev->private->wait_q);
return;
default:
WARN_ON(1);
case QDIO_IRQ_STATE_ACTIVE:
if (cstat & SCHN_STAT_PCI) {
qdio_int_handler_pci(irq_ptr);
- /* no state change so no need to wake up wait_q */
return;
}
if ((cstat & ~SCHN_STAT_PCI) || dstat) {
ccw_device_set_online(adapter->ccw_device);
zfcp_erp_wait(adapter);
- wait_event(adapter->erp_done_wqh,
- !(atomic_read(&unit->status) &
- ZFCP_STATUS_UNIT_SCSI_WORK_PENDING));
+ flush_work(&unit->scsi_work);
down(&zfcp_data.config_sema);
zfcp_unit_put(unit);
atomic_set(&unit->refcount, 0);
init_waitqueue_head(&unit->remove_wq);
+ INIT_WORK(&unit->scsi_work, zfcp_scsi_scan);
unit->port = port;
unit->fcp_lun = fcp_lun;
atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
+ zfcp_fc_nameserver_init(adapter);
+
if (!zfcp_adapter_scsi_register(adapter))
return 0;
cancel_work_sync(&adapter->scan_work);
cancel_work_sync(&adapter->stat_work);
- cancel_delayed_work_sync(&adapter->nsp.work);
zfcp_adapter_scsi_unregister(adapter);
sysfs_remove_group(&adapter->ccw_device->dev.kobj,
&zfcp_sysfs_adapter_attrs);
list_del(&port->list);
write_unlock_irq(&zfcp_data.config_lock);
if (port->rport)
- fc_remote_port_delete(port->rport);
- port->rport = NULL;
+ port->rport->dd_data = NULL;
zfcp_adapter_put(port->adapter);
sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs);
device_unregister(&port->sysfs_device);
/* initialize request counter */
BUG_ON(!zfcp_reqlist_isempty(adapter));
adapter->req_no = 0;
- zfcp_fc_nameserver_init(adapter);
zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL,
ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
* Userspace interface for accessing the
* Access Control Lists / Control File Data Channel
*
- * Copyright IBM Corporation 2008
+ * Copyright IBM Corporation 2008, 2009
*/
#define KMSG_COMPONENT "zfcp"
retval = -ENXIO;
goto free_buffer;
}
+ zfcp_adapter_get(adapter);
retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg,
data_user->control_file);
/* logical unit status */
#define ZFCP_STATUS_UNIT_SHARED 0x00000004
#define ZFCP_STATUS_UNIT_READONLY 0x00000008
-#define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING 0x00000020
/* FSF request status (this does not have a common part) */
#define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT 0x00000002
struct zfcp_erp_action erp_action; /* pending error recovery */
atomic_t erp_counter;
struct zfcp_latencies latencies;
+ struct work_struct scsi_work;
};
/* FSF request */
zfcp_qdio_close(adapter);
zfcp_fsf_req_dismiss_all(adapter);
adapter->fsf_req_seq_no = 0;
+ zfcp_fc_wka_port_force_offline(&adapter->nsp);
/* all ports and units are closed */
zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL,
ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR);
}
}
-struct zfcp_erp_add_work {
- struct zfcp_unit *unit;
- struct work_struct work;
-};
-
-static void zfcp_erp_scsi_scan(struct work_struct *work)
-{
- struct zfcp_erp_add_work *p =
- container_of(work, struct zfcp_erp_add_work, work);
- struct zfcp_unit *unit = p->unit;
- struct fc_rport *rport = unit->port->rport;
-
- if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
- scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
- scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0);
- atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
- zfcp_unit_put(unit);
- wake_up(&unit->port->adapter->erp_done_wqh);
- kfree(p);
-}
-
-static void zfcp_erp_schedule_work(struct zfcp_unit *unit)
-{
- struct zfcp_erp_add_work *p;
-
- p = kzalloc(sizeof(*p), GFP_KERNEL);
- if (!p) {
- dev_err(&unit->port->adapter->ccw_device->dev,
- "Registering unit 0x%016Lx on port 0x%016Lx failed\n",
- (unsigned long long)unit->fcp_lun,
- (unsigned long long)unit->port->wwpn);
- return;
- }
-
- zfcp_unit_get(unit);
- atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
- INIT_WORK(&p->work, zfcp_erp_scsi_scan);
- p->unit = unit;
- if (!queue_work(zfcp_data.work_queue, &p->work))
- zfcp_unit_put(unit);
-}
-
static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result)
{
struct zfcp_adapter *adapter = act->adapter;
switch (act->action) {
case ZFCP_ERP_ACTION_REOPEN_UNIT:
- flush_work(&port->rport_work);
if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) {
- if (!(atomic_read(&unit->status) &
- ZFCP_STATUS_UNIT_SCSI_WORK_PENDING))
- zfcp_erp_schedule_work(unit);
+ zfcp_unit_get(unit);
+ if (scsi_queue_work(unit->port->adapter->scsi_host,
+ &unit->scsi_work) <= 0)
+ zfcp_unit_put(unit);
}
zfcp_unit_put(unit);
break;
while (!(atomic_read(&adapter->status) &
ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL)) {
+
+ zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
+ ignore = down_interruptible(&adapter->erp_ready_sem);
+ zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
+
write_lock_irqsave(&adapter->erp_lock, flags);
next = adapter->erp_ready_head.next;
write_unlock_irqrestore(&adapter->erp_lock, flags);
if (zfcp_erp_strategy(act) != ZFCP_ERP_DISMISSED)
zfcp_erp_wakeup(adapter);
}
-
- zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
- ignore = down_interruptible(&adapter->erp_ready_sem);
- zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
}
atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status);
extern void zfcp_test_link(struct zfcp_port *);
extern void zfcp_fc_link_test_work(struct work_struct *);
extern void zfcp_fc_nameserver_init(struct zfcp_adapter *);
+extern void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *);
/* zfcp_fsf.c */
extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *);
extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *);
extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *);
+extern void zfcp_scsi_scan(struct work_struct *);
/* zfcp_sysfs.c */
extern struct attribute_group zfcp_sysfs_unit_attrs;
struct zfcp_wka_port *wka_port =
container_of(dw, struct zfcp_wka_port, work);
- /* Don't wait forvever. If the wka_port is too busy take it offline
- through a new call later */
- if (!wait_event_timeout(wka_port->completion_wq,
- atomic_read(&wka_port->refcount) == 0,
- HZ >> 1))
- return;
-
mutex_lock(&wka_port->mutex);
if ((atomic_read(&wka_port->refcount) != 0) ||
(wka_port->status != ZFCP_WKA_PORT_ONLINE))
INIT_DELAYED_WORK(&wka_port->work, zfcp_wka_port_offline);
}
+void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka)
+{
+ cancel_delayed_work_sync(&wka->work);
+ mutex_lock(&wka->mutex);
+ wka->status = ZFCP_WKA_PORT_OFFLINE;
+ mutex_unlock(&wka->mutex);
+}
+
static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
struct fcp_rscn_element *elem)
{
if (adisc->els.status) {
/* request rejected or timed out */
- zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL);
+ zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
+ "fcadh_1", NULL);
goto out;
}
container_of(work, struct zfcp_port, test_link_work);
int retval;
- if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) {
- zfcp_port_put(port);
- return; /* port erp is running and will update rport status */
- }
-
zfcp_port_get(port);
port->rport_task = RPORT_DEL;
zfcp_scsi_rport_work(&port->rport_work);
{
struct zfcp_adapter *adapter = port->adapter;
+ if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC))
+ return;
+
atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status);
if ((port->supported_classes != 0) ||
if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
continue;
port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
- if (port) {
- zfcp_port_get(port);
+ if (port)
continue;
- }
port = zfcp_port_enqueue(adapter, acc->wwpn,
ZFCP_STATUS_COMMON_NOESC, d_id);
max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES;
max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE;
- if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT)
+ if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT &&
+ fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV)
return 0;
ret = zfcp_wka_port_get(&adapter->nsp);
struct fsf_link_down_info *link_down)
{
struct zfcp_adapter *adapter = req->adapter;
+ unsigned long flags;
if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED)
return;
atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status);
+
+ read_lock_irqsave(&zfcp_data.config_lock, flags);
zfcp_scsi_schedule_rports_block(adapter);
+ read_unlock_irqrestore(&zfcp_data.config_lock, flags);
if (!link_down)
goto out;
}
}
-static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
- __releases(&adapter->req_q_lock)
- __acquires(&adapter->req_q_lock)
+static int zfcp_fsf_sbal_check(struct zfcp_adapter *adapter)
{
struct zfcp_qdio_queue *req_q = &adapter->req_q;
- long ret;
- if (atomic_read(&req_q->count) <= -REQUEST_LIST_SIZE)
- return -EIO;
- if (atomic_read(&req_q->count) > 0)
- return 0;
+ spin_lock_bh(&adapter->req_q_lock);
+ if (atomic_read(&req_q->count))
+ return 1;
+ spin_unlock_bh(&adapter->req_q_lock);
+ return 0;
+}
+
+static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
+{
+ long ret;
- atomic_dec(&req_q->count);
spin_unlock_bh(&adapter->req_q_lock);
ret = wait_event_interruptible_timeout(adapter->request_wq,
- atomic_read(&req_q->count) >= 0,
- 5 * HZ);
- spin_lock_bh(&adapter->req_q_lock);
- atomic_inc(&req_q->count);
-
+ zfcp_fsf_sbal_check(adapter), 5 * HZ);
if (ret > 0)
return 0;
if (!ret)
atomic_inc(&adapter->qdio_outb_full);
+
+ spin_lock_bh(&adapter->req_q_lock);
return -EIO;
}
static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
{
struct zfcp_adapter *adapter = req->adapter;
- unsigned long flags;
- int idx;
+ unsigned long flags;
+ int idx;
+ int with_qtcb = (req->qtcb != NULL);
/* put allocated FSF request into hash table */
spin_lock_irqsave(&adapter->req_list_lock, flags);
}
/* Don't increase for unsolicited status */
- if (req->qtcb)
+ if (with_qtcb)
adapter->fsf_req_seq_no++;
adapter->req_no++;
spin_lock_bh(&adapter->req_q_lock);
if (zfcp_fsf_req_sbal_get(adapter))
- goto out;
+ goto out_unlock;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
0, NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
- goto out;
+ goto out_unlock;
}
sbale = zfcp_qdio_sbale_req(req);
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
-out:
spin_unlock_bh(&adapter->req_q_lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
zfcp_fsf_req_free(req);
+ return retval;
+out_unlock:
+ spin_unlock_bh(&adapter->req_q_lock);
return retval;
}
spin_lock_bh(&adapter->req_q_lock);
if (zfcp_fsf_req_sbal_get(adapter))
- goto out;
+ goto out_unlock;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
- goto out;
+ goto out_unlock;
}
if (data)
req->handler = zfcp_fsf_exchange_port_data_handler;
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
-out:
spin_unlock_bh(&adapter->req_q_lock);
+
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
zfcp_fsf_req_free(req);
return retval;
+
+out_unlock:
+ spin_unlock_bh(&adapter->req_q_lock);
+ return retval;
}
static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req)
{
- if (req->qtcb->header.fsf_status != FSF_GOOD)
- req->status |= ZFCP_STATUS_FSFREQ_ERROR;
}
/**
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL,
old_req_id);
- return SUCCESS;
+ return FAILED; /* completion could be in progress */
}
old_req->data = NULL;
*/
static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport)
{
- struct zfcp_port *port = rport->dd_data;
+ struct zfcp_port *port;
write_lock_irq(&zfcp_data.config_lock);
- port->rport = NULL;
+ port = rport->dd_data;
+ if (port)
+ port->rport = NULL;
write_unlock_irq(&zfcp_data.config_lock);
}
*/
static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport)
{
- struct zfcp_port *port = rport->dd_data;
+ struct zfcp_port *port;
+
+ write_lock_irq(&zfcp_data.config_lock);
+ port = rport->dd_data;
+ if (port)
+ zfcp_port_get(port);
+ write_unlock_irq(&zfcp_data.config_lock);
- zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+ if (port) {
+ zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+ zfcp_port_put(port);
+ }
}
static void zfcp_scsi_rport_register(struct zfcp_port *port)
static void zfcp_scsi_rport_block(struct zfcp_port *port)
{
- if (port->rport)
- fc_remote_port_delete(port->rport);
+ struct fc_rport *rport = port->rport;
+
+ if (rport)
+ fc_remote_port_delete(rport);
}
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
}
+void zfcp_scsi_scan(struct work_struct *work)
+{
+ struct zfcp_unit *unit = container_of(work, struct zfcp_unit,
+ scsi_work);
+ struct fc_rport *rport;
+
+ flush_work(&unit->port->rport_work);
+ rport = unit->port->rport;
+
+ if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
+ scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
+ scsilun_to_int((struct scsi_lun *)
+ &unit->fcp_lun), 0);
+
+ zfcp_unit_put(unit);
+}
+
struct fc_function_template zfcp_transport_functions = {
.show_starget_port_id = 1,
.show_starget_port_name = 1,
write_lock_irq(&zfcp_data.config_lock);
unit = zfcp_get_unit_by_lun(port, fcp_lun);
- if (unit && (atomic_read(&unit->refcount) == 0)) {
- zfcp_unit_get(unit);
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status);
- list_move(&unit->list, &unit_remove_lh);
- } else
- unit = NULL;
+ if (unit) {
+ write_unlock_irq(&zfcp_data.config_lock);
+ /* wait for possible timeout during SCSI probe */
+ flush_work(&unit->scsi_work);
+ write_lock_irq(&zfcp_data.config_lock);
+
+ if (atomic_read(&unit->refcount) == 0) {
+ zfcp_unit_get(unit);
+ atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE,
+ &unit->status);
+ list_move(&unit->list, &unit_remove_lh);
+ } else {
+ unit = NULL;
+ }
+ }
write_unlock_irq(&zfcp_data.config_lock);
return 0;
}
-static int jsf_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
- unsigned long arg)
+static long jsf_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
{
+ lock_kernel();
int error = -ENOTTY;
void __user *argp = (void __user *)arg;
- if (!capable(CAP_SYS_ADMIN))
+ if (!capable(CAP_SYS_ADMIN)) {
+ unlock_kernel();
return -EPERM;
+ }
switch (cmd) {
case JSFLASH_IDENT:
- if (copy_to_user(argp, &jsf0.id, JSFIDSZ))
+ if (copy_to_user(argp, &jsf0.id, JSFIDSZ)) {
+ unlock_kernel();
return -EFAULT;
+ }
break;
case JSFLASH_ERASE:
error = jsf_ioctl_erase(arg);
break;
}
+ unlock_kernel();
return error;
}
.llseek = jsf_lseek,
.read = jsf_read,
.write = jsf_write,
- .ioctl = jsf_ioctl,
+ .unlocked_ioctl = jsf_ioctl,
.mmap = jsf_mmap,
.open = jsf_open,
.release = jsf_release,
static void uctrl_get_event_status(struct uctrl_driver *);
static void uctrl_get_external_status(struct uctrl_driver *);
-static int
-uctrl_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
+static long
+uctrl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
default:
static const struct file_operations uctrl_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
- .ioctl = uctrl_ioctl,
+ .unlocked_ioctl = uctrl_ioctl,
.open = uctrl_open,
};
pci_set_master(pdev);
pci_try_set_mwi(pdev);
- if (pci_set_dma_mask(pdev, DMA_64BIT_MASK)
- || pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK))
- if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)
- || pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)))
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ || pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
TW_PRINTK(host, TW_DRIVER, 0x40, "Failed to set dma mask during resume");
retval = -ENODEV;
goto out_disable_device;
a4000t_scsi_device = platform_device_register_simple("a4000t-scsi",
-1, NULL, 0);
if (IS_ERR(a4000t_scsi_device)) {
- platform_driver_register(&a4000t_scsi_driver);
+ platform_driver_unregister(&a4000t_scsi_driver);
return PTR_ERR(a4000t_scsi_device);
}
if (dev->nondasd_support && !dev->in_reset)
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
- if (dma_get_required_mask(&dev->pdev->dev) > DMA_32BIT_MASK)
+ if (dma_get_required_mask(&dev->pdev->dev) > DMA_BIT_MASK(32))
dev->needs_dac = 1;
dev->dac_support = 0;
if ((sizeof(dma_addr_t) > 4) && dev->needs_dac &&
#include "cxgb3i_offload.h"
#include "cxgb3i_ddp.h"
-#define CXGB3I_SCSI_QDEPTH_DFLT 128
+#define CXGB3I_SCSI_HOST_QDEPTH 1024
#define CXGB3I_MAX_TARGET CXGB3I_MAX_CONN
#define CXGB3I_MAX_LUN 512
#define ISCSI_PDU_NONPAYLOAD_MAX \
}
static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp,
- int start, int max, int count,
+ unsigned int start, unsigned int max,
+ unsigned int count,
struct cxgb3i_gather_list *gl)
{
- unsigned int i, j;
+ unsigned int i, j, k;
+ /* not enough entries */
+ if ((max - start) < count)
+ return -EBUSY;
+
+ max -= count;
spin_lock(&ddp->map_lock);
- for (i = start; i <= max;) {
- for (j = 0; j < count; j++) {
- if (ddp->gl_map[i + j])
+ for (i = start; i < max;) {
+ for (j = 0, k = i; j < count; j++, k++) {
+ if (ddp->gl_map[k])
break;
}
if (j == count) {
- for (j = 0; j < count; j++)
- ddp->gl_map[i + j] = gl;
+ for (j = 0, k = i; j < count; j++, k++)
+ ddp->gl_map[k] = gl;
spin_unlock(&ddp->map_lock);
return i;
}
struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi;
struct pagepod_hdr hdr;
unsigned int npods;
- int idx = -1, idx_max;
+ int idx = -1;
int err = -ENOMEM;
u32 sw_tag = *tagp;
u32 tag;
}
npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT;
- idx_max = ddp->nppods - npods + 1;
if (ddp->idx_last == ddp->nppods)
- idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl);
+ idx = ddp_find_unused_entries(ddp, 0, ddp->nppods, npods, gl);
else {
idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1,
- idx_max, npods, gl);
- if (idx < 0 && ddp->idx_last >= npods)
+ ddp->nppods, npods, gl);
+ if (idx < 0 && ddp->idx_last >= npods) {
idx = ddp_find_unused_entries(ddp, 0,
- ddp->idx_last - npods + 1,
+ min(ddp->idx_last + npods, ddp->nppods),
npods, gl);
+ }
}
if (idx < 0) {
ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n",
.proc_name = "cxgb3i",
.queuecommand = iscsi_queuecommand,
.change_queue_depth = iscsi_change_queue_depth,
- .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1,
+ .can_queue = CXGB3I_SCSI_HOST_QDEPTH,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
- .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT,
+ .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler = iscsi_eh_device_reset,
.eh_target_reset_handler = iscsi_eh_target_reset,
+ .target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.this_id = -1,
};
c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
c3cn, c3cn->write_seq, c3cn->snd_una,
cxgb3_snd_win);
- err = -EAGAIN;
+ err = -ENOBUFS;
goto out_err;
}
out_err:
if (copied == 0 && err == -EPIPE)
copied = c3cn->err ? c3cn->err : -EPIPE;
+ else
+ copied = err;
goto done;
}
return 0;
}
- if (err < 0 && err != -EAGAIN) {
- kfree_skb(skb);
- cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
- task->itt, skb, skb->len, skb->data_len, err);
- iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
- iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+ if (err == -EAGAIN || err == -ENOBUFS) {
+ /* reset skb to send when we are called again */
+ tdata->skb = skb;
return err;
}
- /* reset skb to send when we are called again */
- tdata->skb = skb;
- return -EAGAIN;
+
+ kfree_skb(skb);
+ cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
+ task->itt, skb, skb->len, skb->data_len, err);
+ iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
+ iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+ return err;
}
int cxgb3i_pdu_init(void)
DEFINE_TIMER(fcoe_timer, NULL, 0, 0);
DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
-/* Function Prototyes */
+/* Function Prototypes */
static int fcoe_reset(struct Scsi_Host *shost);
static int fcoe_xmit(struct fc_lport *, struct fc_frame *);
static int fcoe_rcv(struct sk_buff *, struct net_device *,
/**
* fcoe_lport_config() - sets up the fc_lport
* @lp: ptr to the fc_lport
- * @shost: ptr to the parent scsi host
*
* Returns: 0 for success
*/
rtnl_lock();
memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN);
+ dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
rtnl_unlock();
/*
dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
rtnl_unlock();
- /* Free the per-CPU revieve threads */
+ /* Free the per-CPU receive threads */
fcoe_percpu_clean(lp);
/* Free existing skbs */
}
#else
/*
- * This a non-SMP scenario where the singluar Rx thread is
+ * This a non-SMP scenario where the singular Rx thread is
* being removed. Free all skbs and stop the thread.
*/
spin_lock_bh(&p->fcoe_rx_list.lock);
* @skb: the receive skb
* @dev: associated net device
* @ptype: context
- * @odldev: last device
+ * @olddev: last device
*
* this function will receive the packet and build fc frame and pass it up
*
kfree_skb(skb);
return -1;
}
-EXPORT_SYMBOL_GPL(fcoe_rcv);
/**
* fcoe_start_io() - pass to netdev to start xmit for fcoe
}
/**
- * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof
+ * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof
* @skb: the skb to be xmitted
* @tlen: total len
*
/**
* fcoe_fc_crc() - calculates FC CRC in this fcoe skb
- * @fp: the fc_frame containg data to be checksummed
+ * @fp: the fc_frame containing data to be checksummed
*
* This uses crc32() to calculate the crc for fc frame
* Return : 32 bit crc
wlen = skb->len / FCOE_WORD_TO_BYTE;
if (!lp->link_up) {
- kfree(skb);
+ kfree_skb(skb);
return 0;
}
cp = NULL;
}
- /* adjust skb netowrk/transport offsets to match mac/fcoe/fc */
+ /* adjust skb network/transport offsets to match mac/fcoe/fc */
skb_push(skb, elen + hlen);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_xmit);
/**
* fcoe_percpu_receive_thread() - recv thread per cpu
/**
- * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
+ * fcoe_check_wait_queue() - attempt to clear the transmit backlog
+ * @lp: the fc_lport
*
* This empties the wait_queue, dequeue the head of the wait_queue queue
* and calls fcoe_start_io() for each packet, if all skb have been
* transmitted, return qlen or -1 if a error occurs, then restore
- * wait_queue and try again later.
+ * wait_queue and try again later.
*
* The wait_queue is used when the skb transmit fails. skb will go
- * in the wait_queue which will be emptied by the time function OR
+ * in the wait_queue which will be emptied by the timer function or
* by the next skb transmit.
*
* Returns: 0 for success
*/
static void fcoe_dev_setup()
{
- /*
- * here setup a interface specific wd time to
- * monitor the link state
- */
register_netdevice_notifier(&fcoe_notifier);
}
/**
* fcoe_if_to_netdev() - parse a name buffer to get netdev
- * @ifname: fixed array for output parsed ifname
* @buffer: incoming buffer to be copied
*
- * Returns: NULL or ptr to netdeive
+ * Returns: NULL or ptr to net_device
*/
static struct net_device *fcoe_if_to_netdev(const char *buffer)
{
}
/**
- * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev
+ * fcoe_netdev_to_module_owner() - finds out the driver module of the netdev
* @netdev: the target netdev
*
* Returns: ptr to the struct module, NULL for failure
* Holds the Ethernet driver module by try_module_get() for
* the corresponding netdev.
*
- * Returns: 0 for succsss
+ * Returns: 0 for success
*/
static int fcoe_ethdrv_get(const struct net_device *netdev)
{
* Releases the Ethernet driver module by module_put for
* the corresponding netdev.
*
- * Returns: 0 for succsss
+ * Returns: 0 for success
*/
static int fcoe_ethdrv_put(const struct net_device *netdev)
{
/**
* fcoe_destroy() - handles the destroy from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
/**
* fcoe_create() - Handles the create call from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
return rc;
}
-EXPORT_SYMBOL_GPL(fcoe_link_ok);
/**
* fcoe_percpu_clean() - Clear the pending skbs for an lport
spin_unlock_bh(&pp->fcoe_rx_list.lock);
}
}
-EXPORT_SYMBOL_GPL(fcoe_percpu_clean);
/**
* fcoe_clean_pending_queue() - Dequeue a skb and free it
}
spin_unlock_bh(&fc->fcoe_pending_queue.lock);
}
-EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
/**
* fcoe_reset() - Resets the fcoe
fc_lport_reset(lport);
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_reset);
/**
* fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
- * @device: this is currently ptr to net_device
+ * @dev: this is currently ptr to net_device
*
* Returns: NULL or the located fcoe_softc
*/
return (fc) ? fc->ctlr.lp : NULL;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup);
/**
* fcoe_hostlist_add() - Add a lport to lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be added
*
* Returns: 0 for success
*/
}
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_add);
/**
* fcoe_hostlist_remove() - remove a lport from lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be removed
*
* Returns: 0 for success
*/
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_remove);
/**
* fcoe_init() - fcoe module loading initialization
}
/**
- * fcoe_ctrl_destroy() - Disable and tear-down the FCoE controller.
+ * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller.
* @fip: FCoE controller.
*
* This is called by FCoE drivers before freeing the &fcoe_ctlr.
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
+ struct ata_port *ap = NULL;
unsigned long lock_flags = 0;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
}
if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res))
sdev->allow_restart = 1;
- if (ipr_is_gata(res) && res->sata_port) {
+ if (ipr_is_gata(res) && res->sata_port)
+ ap = res->sata_port->ap;
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+ if (ap) {
scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN);
- ata_sas_slave_configure(sdev, res->sata_port->ap);
- } else {
+ ata_sas_slave_configure(sdev, ap);
+ } else
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
- }
+ return 0;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
}
if (err) {
- iscsi_conn_failure(conn, err);
+ /* got invalid offset/len */
return -EIO;
}
return 0;
.use_clustering = DISABLE_CLUSTERING,
.slave_alloc = iscsi_sw_tcp_slave_alloc,
.slave_configure = iscsi_sw_tcp_slave_configure,
+ .target_alloc = iscsi_target_alloc,
.proc_name = "iscsi_tcp",
.this_id = -1,
};
lport->tt.rport_logoff(rport);
}
+ list_for_each_entry_safe(rdata, next, &disc->rogue_rports, peers) {
+ rport = PRIV_TO_RPORT(rdata);
+ lport->tt.rport_logoff(rport);
+ }
+
mutex_unlock(&disc->disc_mutex);
}
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_disc *disc = &lport->disc;
- int found = 0;
FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event,
rport->port_id);
- if (event == RPORT_EV_CREATED) {
+ switch (event) {
+ case RPORT_EV_CREATED:
if (disc) {
- found = 1;
mutex_lock(&disc->disc_mutex);
list_add_tail(&rdata->peers, &disc->rports);
mutex_unlock(&disc->disc_mutex);
}
+ break;
+ case RPORT_EV_LOGO:
+ case RPORT_EV_FAILED:
+ case RPORT_EV_STOP:
+ mutex_lock(&disc->disc_mutex);
+ mutex_lock(&rdata->rp_mutex);
+ if (rdata->trans_state == FC_PORTSTATE_ROGUE)
+ list_del(&rdata->peers);
+ mutex_unlock(&rdata->rp_mutex);
+ mutex_unlock(&disc->disc_mutex);
+ break;
+ default:
+ break;
}
- if (!found)
- FC_DEBUG_DISC("The rport (%6x) is not maintained "
- "by the discovery layer\n", rport->port_id);
}
/**
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
rdata->rp_state = RPORT_ST_INIT;
+ list_add_tail(&rdata->peers, &disc->rogue_rports);
lport->tt.rport_login(rport);
}
}
/**
* fc_disc_done() - Discovery has been completed
* @disc: FC discovery context
+ * Locking Note: This function expects that the disc mutex is locked before
+ * it is called. The discovery callback is then made with the lock released,
+ * and the lock is re-taken before returning from this function
*/
static void fc_disc_done(struct fc_disc *disc)
{
struct fc_lport *lport = disc->lport;
+ enum fc_disc_event event;
FC_DEBUG_DISC("Discovery complete for port (%6x)\n",
fc_host_port_id(lport->host));
- disc->disc_callback(lport, disc->event);
+ event = disc->event;
disc->event = DISC_EV_NONE;
if (disc->requested)
fc_disc_gpn_ft_req(disc);
else
disc->pending = 0;
+
+ mutex_unlock(&disc->disc_mutex);
+ disc->disc_callback(lport, event);
+ mutex_lock(&disc->disc_mutex);
}
/**
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
rdata->local_port = lport;
+ list_add_tail(&rdata->peers,
+ &disc->rogue_rports);
lport->tt.rport_login(rport);
} else
FC_DBG("Failed to allocate memory for "
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
*
- * Locking Note: This function expects that the disc_mutex is locked
- * before it is called.
+ * Locking Note: This function is called without disc mutex held, and
+ * should do all its processing with the mutex held
*/
static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
void *disc_arg)
unsigned int len;
int error;
+ mutex_lock(&disc->disc_mutex);
FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n",
fc_host_port_id(disc->lport->host));
if (IS_ERR(fp)) {
fc_disc_error(disc, fp);
+ mutex_unlock(&disc->disc_mutex);
return;
}
disc->seq_count++;
}
fc_frame_free(fp);
+
+ mutex_unlock(&disc->disc_mutex);
}
/**
static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp)
{
struct fc_lport *lport;
- struct fc_rport *rport;
struct fc_rport *new_rport;
struct fc_rport_libfc_priv *rdata;
if (dp->ids.port_id == fc_host_port_id(lport->host))
goto out;
- rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
- if (rport)
- fc_disc_del_target(disc, rport);
-
new_rport = lport->tt.rport_create(dp);
if (new_rport) {
rdata = new_rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
kfree(dp);
+ list_add_tail(&rdata->peers, &disc->rogue_rports);
lport->tt.rport_login(new_rport);
}
return;
INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
mutex_init(&disc->disc_mutex);
INIT_LIST_HEAD(&disc->rports);
+ INIT_LIST_HEAD(&disc->rogue_rports);
disc->lport = lport;
disc->delay = FC_DISC_DELAY;
void *arg, u32 timer_msec)
{
enum fc_rctl r_ctl;
- u32 did;
+ u32 did = FC_FID_NONE;
enum fc_fh_type fh_type;
int rc;
static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
{
struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
- struct fc_lport *lp;
+ struct fc_lport *lport = fsp->lp;
struct fc_frame_header *fh;
struct fcp_txrdy *dd;
u8 r_ctl;
fh = fc_frame_header_get(fp);
r_ctl = fh->fh_r_ctl;
- lp = fsp->lp;
- if (!(lp->state & LPORT_ST_READY))
+ if (!(lport->state & LPORT_ST_READY))
goto out;
if (fc_fcp_lock_pkt(fsp))
goto out;
if (IS_ERR(fp))
fc_fcp_error(fsp, fp);
else if (rc == -ENOMEM)
- fc_fcp_reduce_can_queue(lp);
+ fc_fcp_reduce_can_queue(lport);
}
static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
{
lport->tt.disc_stop_final(lport);
mutex_lock(&lport->lp_mutex);
+ if (lport->dns_rp)
+ lport->tt.rport_logoff(lport->dns_rp);
+ mutex_unlock(&lport->lp_mutex);
+ lport->tt.rport_flush_queue();
+ mutex_lock(&lport->lp_mutex);
fc_lport_enter_logo(lport);
mutex_unlock(&lport->lp_mutex);
cancel_delayed_work_sync(&lport->retry_work);
*/
int fc_lport_destroy(struct fc_lport *lport)
{
+ mutex_lock(&lport->lp_mutex);
+ lport->state = LPORT_ST_NONE;
+ lport->link_up = 0;
lport->tt.frame_send = fc_frame_drop;
+ mutex_unlock(&lport->lp_mutex);
+
lport->tt.fcp_abort_io(lport);
lport->tt.exch_mgr_reset(lport, 0, 0);
return 0;
FC_DEBUG_LPORT("Received a RFT_ID response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_RFT_ID) {
FC_DBG("Received a RFT_ID response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
FC_DEBUG_LPORT("Received a RPN_ID response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_RPN_ID) {
FC_DBG("Received a RPN_ID response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
if (fh && ct && fh->fh_type == FC_TYPE_CT &&
FC_DEBUG_LPORT("Received a SCR response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_SCR) {
FC_DBG("Received a SCR response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_ready(lport);
FC_DEBUG_LPORT("Received a LOGO response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_LOGO) {
FC_DBG("Received a LOGO response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_reset(lport);
fc_lport_state_enter(lport, LPORT_ST_LOGO);
- /* DNS session should be closed so we can release it here */
- if (lport->dns_rp)
- lport->tt.rport_logoff(lport->dns_rp);
-
fp = fc_frame_alloc(lport, sizeof(*logo));
if (!fp) {
fc_lport_error(lport, fp);
FC_DEBUG_LPORT("Received a FLOGI response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_FLOGI) {
FC_DBG("Received a FLOGI response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
did = ntoh24(fh->fh_d_id);
if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
"(%6x).\n", ids.port_id);
event = RPORT_EV_FAILED;
}
+ if (rport->port_id != FC_FID_DIR_SERV)
+ if (rport_ops->event_callback)
+ rport_ops->event_callback(lport, rport,
+ RPORT_EV_FAILED);
put_device(&rport->dev);
rport = new_rport;
rdata = new_rport->dd_data;
int fc_rport_logoff(struct fc_rport *rport)
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
+ struct fc_lport *lport = rdata->local_port;
mutex_lock(&rdata->rp_mutex);
FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id);
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state,"
+ " not removing", fc_host_port_id(lport->host),
+ rport->port_id);
+ mutex_unlock(&rdata->rp_mutex);
+ goto out;
+ }
+
fc_rport_enter_logo(rport);
/*
mutex_unlock(&rdata->rp_mutex);
+out:
return 0;
}
case RPORT_ST_PRLI:
case RPORT_ST_LOGO:
rdata->event = RPORT_EV_FAILED;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue,
&rdata->event_work);
break;
struct fc_rport *rport = rp_arg;
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_lport *lport = rdata->local_port;
- struct fc_els_flogi *plp;
+ struct fc_els_flogi *plp = NULL;
unsigned int tov;
u16 csp_seq;
u16 cssp_seq;
FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_PLOGI) {
FC_DBG("Received a PLOGI response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC &&
(plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_PRLI) {
FC_DBG("Received a PRLI response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
pp = fc_frame_payload_get(fp, sizeof(*pp));
} else {
FC_DBG("Bad ELS response\n");
rdata->event = RPORT_EV_FAILED;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
}
FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_LOGO) {
FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
fc_rport_enter_rtv(rport);
} else {
FC_DBG("Bad ELS response\n");
rdata->event = RPORT_EV_LOGO;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
}
FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_RTV) {
FC_DBG("Received a RTV response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
struct fc_els_rtv_acc *rtv;
default:
FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected "
"state %d\n", sid, rdata->rp_state);
+ fc_frame_free(fp);
+ return;
break;
}
reason = ELS_RJT_NONE;
break;
default:
+ fc_frame_free(rx_fp);
+ return;
break;
}
len = fr_len(rx_fp) - sizeof(*fh);
"while in state %s\n", ntoh24(fh->fh_s_id),
fc_rport_state(rport));
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ fc_frame_free(fp);
+ return;
+ }
+
rjt_data.fp = NULL;
rjt_data.reason = ELS_RJT_UNAB;
rjt_data.explan = ELS_EXPL_NONE;
"while in state %s\n", ntoh24(fh->fh_s_id),
fc_rport_state(rport));
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ fc_frame_free(fp);
+ return;
+ }
+
rdata->event = RPORT_EV_LOGO;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
}
EXPORT_SYMBOL_GPL(iscsi_change_queue_depth);
+int iscsi_target_alloc(struct scsi_target *starget)
+{
+ struct iscsi_cls_session *cls_session = starget_to_session(starget);
+ struct iscsi_session *session = cls_session->dd_data;
+
+ starget->can_queue = session->scsi_cmds_max;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iscsi_target_alloc);
+
void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session)
{
struct iscsi_session *session = cls_session->dd_data;
rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent,
r2t->data_count);
- if (rc)
+ if (rc) {
+ iscsi_conn_failure(conn, ISCSI_ERR_XMIT_FAILED);
return rc;
+ }
+
r2t->sent += r2t->data_count;
goto flush;
}
uint32_t hba_flag; /* hba generic flags */
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
+#define DEFER_ERATT 0x4 /* Deferred error attention in progress */
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
return;
}
-
#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8"
/**
- * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules.
+ * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules
* @incr: integer to convert.
* @hdw: ascii string holding converted integer plus a string terminator.
*
}
/**
- * lpfc_drvr_version_show: Return the Emulex driver string with version number.
+ * lpfc_drvr_version_show - Return the Emulex driver string with version number
* @dev: class unused variable.
* @attr: device attribute, not used.
* @buf: on return contains the module description text.
}
/**
- * lpfc_info_show: Return some pci info about the host in ascii.
+ * lpfc_info_show - Return some pci info about the host in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text from lpfc_info().
}
/**
- * lpfc_serialnum_show: Return the hba serial number in ascii.
+ * lpfc_serialnum_show - Return the hba serial number in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text serial number.
}
/**
- * lpfc_temp_sensor_show: Return the temperature sensor level.
+ * lpfc_temp_sensor_show - Return the temperature sensor level
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted support level.
}
/**
- * lpfc_modeldesc_show: Return the model description of the hba.
+ * lpfc_modeldesc_show - Return the model description of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model description.
}
/**
- * lpfc_modelname_show: Return the model name of the hba.
+ * lpfc_modelname_show - Return the model name of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model name.
}
/**
- * lpfc_programtype_show: Return the program type of the hba.
+ * lpfc_programtype_show - Return the program type of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
}
/**
- * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag.
+ * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the Menlo Maintenance sli flag.
}
/**
- * lpfc_vportnum_show: Return the port number in ascii of the hba.
+ * lpfc_vportnum_show - Return the port number in ascii of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains scsi vpd program type.
}
/**
- * lpfc_fwrev_show: Return the firmware rev running in the hba.
+ * lpfc_fwrev_show - Return the firmware rev running in the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
}
/**
- * lpfc_hdw_show: Return the jedec information about the hba.
+ * lpfc_hdw_show - Return the jedec information about the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
}
/**
- * lpfc_option_rom_version_show: Return the adapter ROM FCode version.
+ * lpfc_option_rom_version_show - Return the adapter ROM FCode version
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the ROM and FCode ascii strings.
}
/**
- * lpfc_state_show: Return the link state of the port.
+ * lpfc_state_show - Return the link state of the port
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains text describing the state of the link.
}
/**
- * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports.
+ * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the sum of fc mapped and unmapped.
}
/**
- * lpfc_issue_lip: Misnomer, name carried over from long ago.
+ * lpfc_issue_lip - Misnomer, name carried over from long ago
* @shost: Scsi_Host pointer.
*
* Description:
}
/**
- * lpfc_do_offline: Issues a mailbox command to bring the link down.
+ * lpfc_do_offline - Issues a mailbox command to bring the link down
* @phba: lpfc_hba pointer.
* @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL.
*
* Assumes any error from lpfc_do_offline() will be negative.
* Can wait up to 5 seconds for the port ring buffers count
* to reach zero, prints a warning if it is not zero and continues.
- * lpfc_workq_post_event() returns a non-zero return coce if call fails.
+ * lpfc_workq_post_event() returns a non-zero return code if call fails.
*
* Returns:
* -EIO error posting the event
}
/**
- * lpfc_selective_reset: Offline then onlines the port.
+ * lpfc_selective_reset - Offline then onlines the port
* @phba: lpfc_hba pointer.
*
* Description:
}
/**
- * lpfc_issue_reset: Selectively resets an adapter.
+ * lpfc_issue_reset - Selectively resets an adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string "selective".
}
/**
- * lpfc_nport_evt_cnt_show: Return the number of nport events.
+ * lpfc_nport_evt_cnt_show - Return the number of nport events
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the ascii number of nport events.
}
/**
- * lpfc_board_mode_show: Return the state of the board.
+ * lpfc_board_mode_show - Return the state of the board
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the state of the adapter.
}
/**
- * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state.
+ * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing one of the strings "online", "offline", "warm" or "error".
}
/**
- * lpfc_get_hba_info: Return various bits of informaton about the adapter.
+ * lpfc_get_hba_info - Return various bits of informaton about the adapter
* @phba: pointer to the adapter structure.
- * @mxri max xri count.
- * @axri available xri count.
- * @mrpi max rpi count.
- * @arpi available rpi count.
- * @mvpi max vpi count.
- * @avpi available vpi count.
+ * @mxri: max xri count.
+ * @axri: available xri count.
+ * @mrpi: max rpi count.
+ * @arpi: available rpi count.
+ * @mvpi: max vpi count.
+ * @avpi: available vpi count.
*
* Description:
* If an integer pointer for an count is not null then the value for the
}
/**
- * lpfc_max_rpi_show: Return maximum rpi.
+ * lpfc_max_rpi_show - Return maximum rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum rpi count in decimal or "Unknown".
}
/**
- * lpfc_used_rpi_show: Return maximum rpi minus available rpi.
+ * lpfc_used_rpi_show - Return maximum rpi minus available rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the used rpi count in decimal or "Unknown".
}
/**
- * lpfc_max_xri_show: Return maximum xri.
+ * lpfc_max_xri_show - Return maximum xri
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum xri count in decimal or "Unknown".
}
/**
- * lpfc_used_xri_show: Return maximum xpi minus the available xpi.
+ * lpfc_used_xri_show - Return maximum xpi minus the available xpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used xri count in decimal or "Unknown".
}
/**
- * lpfc_max_vpi_show: Return maximum vpi.
+ * lpfc_max_vpi_show - Return maximum vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum vpi count in decimal or "Unknown".
}
/**
- * lpfc_used_vpi_show: Return maximum vpi minus the available vpi.
+ * lpfc_used_vpi_show - Return maximum vpi minus the available vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used vpi count in decimal or "Unknown".
}
/**
- * lpfc_npiv_info_show: Return text about NPIV support for the adapter.
+ * lpfc_npiv_info_show - Return text about NPIV support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: text that must be interpreted to determine if npiv is supported.
}
/**
- * lpfc_poll_show: Return text about poll support for the adapter.
+ * lpfc_poll_show - Return text about poll support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the cfg_poll in hex.
}
/**
- * lpfc_poll_store: Set the value of cfg_poll for the adapter.
+ * lpfc_poll_store - Set the value of cfg_poll for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: one or more lpfc_polling_flags values.
}
/**
- * lpfc_param_show: Return a cfg attribute value in decimal.
+ * lpfc_param_show - Return a cfg attribute value in decimal
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_param_hex_show: Return a cfg attribute value in hex.
+ * lpfc_param_hex_show - Return a cfg attribute value in hex
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
* lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
*
* Returns: size of formatted string.
**/
}
/**
- * lpfc_param_init: Intializes a cfg attribute.
+ * lpfc_param_init - Intializes a cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_param_set: Set a cfg attribute value.
+ * lpfc_param_set - Set a cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_param_store: Set a vport attribute value.
+ * lpfc_param_store - Set a vport attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_show: Return decimal formatted cfg attribute value.
+ * lpfc_vport_param_show - Return decimal formatted cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_hex_show: Return hex formatted attribute value.
+ * lpfc_vport_param_hex_show - Return hex formatted attribute value
*
* Description:
* Macro that given an attr e.g.
* hba_queue_depth expands into a function with the name
* lpfc_hba_queue_depth_show
*
- * lpfc_##attr##_show: prints the attribute value in hexidecimal.
+ * lpfc_##attr##_show: prints the attribute value in hexadecimal.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
*
* Returns: length of formatted string.
**/
}
/**
- * lpfc_vport_param_init: Initialize a vport cfg attribute.
+ * lpfc_vport_param_init - Initialize a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_set: Set a vport cfg attribute.
+ * lpfc_vport_param_set - Set a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
}
/**
- * lpfc_vport_param_store: Set a vport attribute.
+ * lpfc_vport_param_store - Set a vport attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
/**
- * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid.
+ * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string lpfc_soft_wwn_key.
lpfc_soft_wwn_enable_store);
/**
- * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter.
+ * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the wwpn in hexidecimal.
+ * @buf: on return contains the wwpn in hexadecimal.
*
* Returns: size of formatted string.
**/
}
/**
- * lpfc_soft_wwpn_store: Set the ww port name of the adapter.
+ * lpfc_soft_wwpn_store - Set the ww port name of the adapter
* @dev class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: contains the wwpn in hexidecimal.
+ * @buf: contains the wwpn in hexadecimal.
* @count: number of wwpn bytes in buf
*
* Returns:
lpfc_soft_wwpn_show, lpfc_soft_wwpn_store);
/**
- * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter.
+ * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the wwnn in hexidecimal.
+ * @buf: on return contains the wwnn in hexadecimal.
*
* Returns: size of formatted string.
**/
}
/**
- * lpfc_soft_wwnn_store: sets the ww node name of the adapter.
+ * lpfc_soft_wwnn_store - sets the ww node name of the adapter
* @cdev: class device that is converted into a Scsi_host.
- * @buf: contains the ww node name in hexidecimal.
+ * @buf: contains the ww node name in hexadecimal.
* @count: number of wwnn bytes in buf.
*
* Returns:
"for a device to come back");
/**
- * lpfc_nodev_tmo_show: Return the hba dev loss timeout value.
+ * lpfc_nodev_tmo_show - Return the hba dev loss timeout value
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the dev loss timeout in decimal.
}
/**
- * lpfc_nodev_tmo_init: Set the hba nodev timeout value.
+ * lpfc_nodev_tmo_init - Set the hba nodev timeout value
* @vport: lpfc vport structure pointer.
* @val: contains the nodev timeout value.
*
}
/**
- * lpfc_update_rport_devloss_tmo: Update dev loss tmo value.
+ * lpfc_update_rport_devloss_tmo - Update dev loss tmo value
* @vport: lpfc vport structure pointer.
*
* Description:
}
/**
- * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values.
+ * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
lpfc_vport_param_show(devloss_tmo)
/**
- * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit.
+ * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
lpfc_vport_param_show(restrict_login);
/**
- * lpfc_restrict_login_init: Set the vport restrict login flag.
+ * lpfc_restrict_login_init - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
}
/**
- * lpfc_restrict_login_set: Set the vport restrict login flag.
+ * lpfc_restrict_login_set - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
*/
/**
- * lpfc_topology_set: Set the adapters topology field.
+ * lpfc_topology_set - Set the adapters topology field
* @phba: lpfc_hba pointer.
* @val: topology value.
*
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
-static int
-lpfc_topology_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_topology_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0;
+ int nolip = 0;
+ const char *val_buf = buf;
int err;
uint32_t prev_val;
+
+ if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+ nolip = 1;
+ val_buf = &buf[strlen("nolip ")];
+ }
+
+ if (!isdigit(val_buf[0]))
+ return -EINVAL;
+ if (sscanf(val_buf, "%i", &val) != 1)
+ return -EINVAL;
+
if (val >= 0 && val <= 6) {
prev_val = phba->cfg_topology;
phba->cfg_topology = val;
+ if (nolip)
+ return strlen(buf);
+
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
- if (err)
+ if (err) {
phba->cfg_topology = prev_val;
- return err;
+ return -EINVAL;
+ } else
+ return strlen(buf);
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"%d:0467 lpfc_topology attribute cannot be set to %d, "
MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
lpfc_param_show(topology)
lpfc_param_init(topology, 0, 0, 6)
-lpfc_param_store(topology)
static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
lpfc_topology_show, lpfc_topology_store);
/**
- * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl
- * sysfs file.
+ * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
* @dev: Pointer to class device.
* @buf: Data buffer.
* @count: Size of the data buffer.
unsigned long base, step, bucket_type;
if (!strncmp(buf, "setbucket", strlen("setbucket"))) {
- if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN)
+ if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1))
return -EINVAL;
strcpy(bucket_data, buf);
/**
- * lpfc_stat_data_ctrl_show: Read callback function for
- * lpfc_stat_data_ctrl sysfs file.
+ * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file
* @dev: Pointer to class device object.
* @buf: Data buffer.
*
/**
- * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data
- * sysfs attribute.
+ * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute
* @kobj: Pointer to the kernel object
* @bin_attr: Attribute object
* @buff: Buffer pointer
*/
/**
- * lpfc_link_speed_set: Set the adapters link speed.
+ * lpfc_link_speed_set - Set the adapters link speed
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
-static int
-lpfc_link_speed_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0;
+ int nolip = 0;
+ const char *val_buf = buf;
int err;
uint32_t prev_val;
+ if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+ nolip = 1;
+ val_buf = &buf[strlen("nolip ")];
+ }
+
+ if (!isdigit(val_buf[0]))
+ return -EINVAL;
+ if (sscanf(val_buf, "%i", &val) != 1)
+ return -EINVAL;
+
if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
return -EINVAL;
- if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+ if ((val >= 0 && val <= 8)
&& (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
prev_val = phba->cfg_link_speed;
phba->cfg_link_speed = val;
+ if (nolip)
+ return strlen(buf);
+
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
- if (err)
+ if (err) {
phba->cfg_link_speed = prev_val;
- return err;
+ return -EINVAL;
+ } else
+ return strlen(buf);
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
lpfc_param_show(link_speed)
/**
- * lpfc_link_speed_init: Set the adapters link speed.
+ * lpfc_link_speed_init - Set the adapters link speed
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
return -EINVAL;
}
-lpfc_param_store(link_speed)
static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
lpfc_link_speed_show, lpfc_link_speed_store);
/*
- * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count
+ * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
* This value can be set to values between 64 and 256. The default value is
* 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
* will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE).
};
/**
- * sysfs_ctlreg_write: Write method for writing to ctlreg.
+ * sysfs_ctlreg_write - Write method for writing to ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to the adapter IOREG space.
}
/**
- * sysfs_ctlreg_read: Read method for reading from ctlreg.
+ * sysfs_ctlreg_read - Read method for reading from ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: if succesful contains the data from the adapter IOREG space.
};
/**
- * sysfs_mbox_idle: frees the sysfs mailbox.
+ * sysfs_mbox_idle - frees the sysfs mailbox
* @phba: lpfc_hba pointer
**/
static void
}
/**
- * sysfs_mbox_write: Write method for writing information via mbox.
+ * sysfs_mbox_write - Write method for writing information via mbox
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to sysfs mbox.
}
/**
- * sysfs_mbox_read: Read method for reading information via mbox.
+ * sysfs_mbox_read - Read method for reading information via mbox
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be read from sysfs mbox.
};
/**
- * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries.
+ * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
*
* Return codes:
}
/**
- * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries.
+ * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
**/
void
*/
/**
- * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id.
+ * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_port_type: Set the value of the scsi host port type.
+ * lpfc_get_host_port_type - Set the value of the scsi host port type
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_port_state: Set the value of the scsi host port state.
+ * lpfc_get_host_port_state - Set the value of the scsi host port state
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_speed: Set the value of the scsi host speed.
+ * lpfc_get_host_speed - Set the value of the scsi host speed
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name.
+ * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name
* @shost: kernel scsi host pointer.
**/
static void
}
/**
- * lpfc_get_stats: Return statistical information about the adapter.
+ * lpfc_get_stats - Return statistical information about the adapter
* @shost: kernel scsi host pointer.
*
* Notes:
}
/**
- * lpfc_reset_stats: Copy the adapter link stats information.
+ * lpfc_reset_stats - Copy the adapter link stats information
* @shost: kernel scsi host pointer.
**/
static void
*/
/**
- * lpfc_get_node_by_target: Return the nodelist for a target.
+ * lpfc_get_node_by_target - Return the nodelist for a target
* @starget: kernel scsi target pointer.
*
* Returns:
}
/**
- * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1.
+ * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1
* @starget: kernel scsi target pointer.
**/
static void
}
/**
- * lpfc_get_starget_node_name: Set the target node name.
+ * lpfc_get_starget_node_name - Set the target node name
* @starget: kernel scsi target pointer.
*
* Description: Set the target node name to the ndlp node name wwn or zero.
}
/**
- * lpfc_get_starget_port_name: Set the target port name.
+ * lpfc_get_starget_port_name - Set the target port name
* @starget: kernel scsi target pointer.
*
* Description: set the target port name to the ndlp port name wwn or zero.
}
/**
- * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo.
+ * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo
* @rport: fc rport address.
* @timeout: new value for dev loss tmo.
*
}
/**
- * lpfc_rport_show_function: Return rport target information.
+ * lpfc_rport_show_function - Return rport target information
*
* Description:
* Macro that uses field to generate a function with the name lpfc_show_rport_
static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
/**
- * lpfc_set_vport_symbolic_name: Set the vport's symbolic name.
+ * lpfc_set_vport_symbolic_name - Set the vport's symbolic name
* @fc_vport: The fc_vport who's symbolic name has been changed.
*
* Description:
};
/**
- * lpfc_get_cfgparam: Used during probe_one to init the adapter structure.
+ * lpfc_get_cfgparam - Used during probe_one to init the adapter structure
* @phba: lpfc_hba pointer.
**/
void
}
/**
- * lpfc_get_vport_cfgparam: Used during port create, init the vport structure.
+ * lpfc_get_vport_cfgparam - Used during port create, init the vport structure
* @vport: lpfc_vport pointer.
**/
void
struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
+void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
+ uint32_t);
void lpfc_reset_barrier(struct lpfc_hba * phba);
int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
#include "lpfc_debugfs.h"
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-/**
+/*
* debugfs interface
*
* To access this interface the user should:
MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
"Set debugfs slow ring trace depth");
-int lpfc_debugfs_mask_disc_trc;
+static int lpfc_debugfs_mask_disc_trc;
module_param(lpfc_debugfs_mask_disc_trc, int, 0);
MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
"Set debugfs discovery trace mask");
static unsigned long lpfc_debugfs_start_time = 0L;
/**
- * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer.
+ * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer
* @vport: The vport to gather the log info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
}
/**
- * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer.
+ * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer
* @phba: The HBA to gather the log info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
static int lpfc_debugfs_last_hbq = -1;
/**
- * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer.
+ * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer
* @phba: The HBA to gather host buffer info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
static int lpfc_debugfs_last_hba_slim_off;
/**
- * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer.
+ * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer
* @phba: The HBA to gather SLIM info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
len += snprintf(buf+len, size-len, "HBA SLIM\n");
lpfc_memcpy_from_slim(buffer,
- ((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off,
- 1024);
+ phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024);
ptr = (uint32_t *)&buffer[0];
off = lpfc_debugfs_last_hba_slim_off;
}
/**
- * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer.
+ * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer
* @phba: The HBA to gather Host SLIM info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
}
/**
- * lpfc_debugfs_nodelist_data - Dump target node list to a buffer.
+ * lpfc_debugfs_nodelist_data - Dump target node list to a buffer
* @vport: The vport to gather target node info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
#endif
/**
- * lpfc_debugfs_disc_trc - Store discovery trace log.
+ * lpfc_debugfs_disc_trc - Store discovery trace log
* @vport: The vport to associate this trace string with for retrieval.
* @mask: Log entry classification.
* @fmt: Format string to be displayed when dumping the log.
}
/**
- * lpfc_debugfs_slow_ring_trc - Store slow ring trace log.
+ * lpfc_debugfs_slow_ring_trc - Store slow ring trace log
* @phba: The phba to associate this trace string with for retrieval.
* @fmt: Format string to be displayed when dumping the log.
* @data1: 1st data parameter to be applied to @fmt.
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
/**
- * lpfc_debugfs_disc_trc_open - Open the discovery trace log.
+ * lpfc_debugfs_disc_trc_open - Open the discovery trace log
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log.
+ * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer.
+ * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
/**
- * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file.
+ * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
}
/**
- * lpfc_debugfs_lseek - Seek through a debugfs file.
+ * lpfc_debugfs_lseek - Seek through a debugfs file
* @file: The file pointer to seek through.
* @off: The offset to seek to or the amount to seek by.
* @whence: Indicates how to seek.
}
/**
- * lpfc_debugfs_read - Read a debugfs file.
+ * lpfc_debugfs_read - Read a debugfs file
* @file: The file pointer to read from.
* @buf: The buffer to copy the data to.
* @nbytes: The number of bytes to read.
}
/**
- * lpfc_debugfs_release - Release the buffer used to store debugfs file data.
+ * lpfc_debugfs_release - Release the buffer used to store debugfs file data
* @inode: The inode pointer that contains a vport pointer. (unused)
* @file: The file pointer that contains the buffer to release.
*
#endif
/**
- * lpfc_debugfs_initialize - Initialize debugfs for a vport.
+ * lpfc_debugfs_initialize - Initialize debugfs for a vport
* @vport: The vport pointer to initialize.
*
* Description:
}
/**
- * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport.
+ * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport
* @vport: The vport pointer to remove from debugfs.
*
* Description:
#define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */
struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */
+ struct lpfc_hba *phba;
struct fc_rport *rport; /* Corresponding FC transport
port structure */
struct lpfc_vport *vport;
static int lpfc_max_els_tries = 3;
/**
- * lpfc_els_chk_latt: Check host link attention event for a vport.
+ * lpfc_els_chk_latt - Check host link attention event for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there is an outstanding host link
}
/**
- * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure.
+ * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure
* @vport: pointer to a host virtual N_Port data structure.
* @expectRsp: flag indicating whether response is expected.
* @cmdSize: size of the ELS command.
}
/**
- * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport.
+ * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues a fabric registration login for a @vport. An
}
/**
- * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port.
+ * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
}
/**
- * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port.
+ * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
}
/**
- * lpfc_cmpl_els_flogi: Completion callback function for flogi.
+ * lpfc_cmpl_els_flogi - Completion callback function for flogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport.
+ * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs.
+ * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs
* @phba: pointer to lpfc hba data structure.
*
* This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs
}
/**
- * lpfc_initial_flogi: Issue an initial fabric login for a vport.
+ * lpfc_initial_flogi - Issue an initial fabric login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Login (FLOGI) for the @vport
}
/**
- * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport.
+ * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Discover (FDISC) for the @vport
}
/**
- * lpfc_more_plogi: Check and issue remaining plogis for a vport.
+ * lpfc_more_plogi - Check and issue remaining plogis for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there are more remaining Port Logins
}
/**
- * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp.
+ * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp
* @phba: pointer to lpfc hba data structure.
* @prsp: pointer to response IOCB payload.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_end_rscn: Check and handle more rscn for a vport.
+ * lpfc_end_rscn - Check and handle more rscn for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether more Registration State Change
}
/**
- * lpfc_cmpl_els_plogi: Completion callback function for plogi.
+ * lpfc_cmpl_els_plogi - Completion callback function for plogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport.
+ * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @did: destination port identifier.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_prli: Completion callback function for prli.
+ * lpfc_cmpl_els_prli - Completion callback function for prli
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_prli: Issue a prli iocb command for a vport.
+ * lpfc_issue_els_prli - Issue a prli iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_rscn_disc: Perform rscn discovery for a vport.
+ * lpfc_rscn_disc - Perform rscn discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine performs Registration State Change Notification (RSCN)
}
/**
- * lpfc_adisc_done: Complete the adisc phase of discovery.
+ * lpfc_adisc_done - Complete the adisc phase of discovery
* @vport: pointer to lpfc_vport hba data structure that finished all ADISCs.
*
* This function is called when the final ADISC is completed during discovery.
}
/**
- * lpfc_more_adisc: Issue more adisc as needed.
+ * lpfc_more_adisc - Issue more adisc as needed
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine determines whether there are more ndlps on a @vport
}
/**
- * lpfc_cmpl_els_adisc: Completion callback function for adisc.
+ * lpfc_cmpl_els_adisc - Completion callback function for adisc
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport.
+ * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_logo: Completion callback function for logo.
+ * lpfc_cmpl_els_logo - Completion callback function for logo
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_logo: Issue a logo to an node on a vport.
+ * lpfc_issue_els_logo - Issue a logo to an node on a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_cmd: Completion callback function for generic els command.
+ * lpfc_cmpl_els_cmd - Completion callback function for generic els command
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_scr: Issue a scr to an node on a vport.
+ * lpfc_issue_els_scr - Issue a scr to an node on a vport
* @vport: pointer to a host virtual N_Port data structure.
* @nportid: N_Port identifier to the remote node.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_issue_els_farpr: Issue a farp to an node on a vport.
+ * lpfc_issue_els_farpr - Issue a farp to an node on a vport
* @vport: pointer to a host virtual N_Port data structure.
* @nportid: N_Port identifier to the remote node.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry.
+ * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry
* @vport: pointer to a host virtual N_Port data structure.
* @nlp: pointer to a node-list data structure.
*
}
/**
- * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer.
+ * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer
* @ptr: holder for the pointer to the timer function associated data (ndlp).
*
* This routine is invoked by the ndlp delayed-function timer to check
}
/**
- * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function.
+ * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function
* @ndlp: pointer to a node-list data structure.
*
* This routine is the worker-thread handler for processing the @ndlp delayed
}
/**
- * lpfc_els_retry: Make retry decision on an els command iocb.
+ * lpfc_els_retry - Make retry decision on an els command iocb
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb.
+ * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb
* @phba: pointer to lpfc hba data structure.
* @buf_ptr1: pointer to the lpfc DMA buffer data structure.
*
}
/**
- * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl.
+ * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl
* @phba: pointer to lpfc hba data structure.
* @buf_ptr: pointer to the lpfc dma buffer data structure.
*
}
/**
- * lpfc_els_free_iocb: Free a command iocb and its associated resources.
+ * lpfc_els_free_iocb - Free a command iocb and its associated resources
* @phba: pointer to lpfc hba data structure.
* @elsiocb: pointer to lpfc els command iocb data structure.
*
}
/**
- * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response.
+ * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd.
+ * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd.
+ * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command.
+ * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command
* @vport: pointer to a host virtual N_Port data structure.
* @flag: the els command code to be accepted.
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command.
+ * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command
* @vport: pointer to a virtual N_Port data structure.
* @rejectError:
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd.
+ * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd
* @vport: pointer to a virtual N_Port data structure.
* @oldiocb: pointer to the original lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd.
+ * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd
* @vport: pointer to a virtual N_Port data structure.
* @oldiocb: pointer to the original lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command.
+ * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command
* @vport: pointer to a virtual N_Port data structure.
* @format: rnid command format.
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport.
+ * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues Address Discover (ADISC) ELS commands to those
}
/**
- * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc.
+ * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues Port Login (PLOGI) ELS commands to all the N_Ports
}
/**
- * lpfc_els_flush_rscn: Clean up any rscn activities with a vport.
+ * lpfc_els_flush_rscn - Clean up any rscn activities with a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine cleans up any Registration State Change Notification
}
/**
- * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did.
+ * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did
* @vport: pointer to a host virtual N_Port data structure.
* @did: remote destination port identifier.
*
}
/**
- * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn
+ * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the
}
/**
- * lpfc_send_rscn_event: Send an RSCN event to management application.
+ * lpfc_send_rscn_event - Send an RSCN event to management application
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
*
}
/**
- * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb.
+ * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_handle_rscn: Handle rscn for a vport.
+ * lpfc_els_handle_rscn - Handle rscn for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine handles the Registration State Configuration Notification
}
/**
- * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb.
+ * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb.
+ * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb.
+ * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd.
+ * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_els_rcv_rps: Process an unsolicited rps iocb.
+ * lpfc_els_rcv_rps - Process an unsolicited rps iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command.
+ * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command
* @vport: pointer to a host virtual N_Port data structure.
* @cmdsize: size of the ELS command.
* @oldiocb: pointer to the original lpfc command iocb data structure.
}
/**
- * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb.
+ * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_farp: Process an unsolicited farp request els command.
+ * lpfc_els_rcv_farp - Process an unsolicited farp request els command
* @vport: pointer to a virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb.
+ * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_rcv_fan: Process an unsolicited fan iocb command.
+ * lpfc_els_rcv_fan - Process an unsolicited fan iocb command
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @fan_ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_els_timeout: Handler funciton to the els timer.
+ * lpfc_els_timeout - Handler funciton to the els timer
* @ptr: holder for the timer function associated data.
*
* This routine is invoked by the ELS timer after timeout. It posts the ELS
}
/**
- * lpfc_els_timeout_handler: Process an els timeout event.
+ * lpfc_els_timeout_handler - Process an els timeout event
* @vport: pointer to a virtual N_Port data structure.
*
* This routine is the actual handler function that processes an ELS timeout
}
/**
- * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport.
+ * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine is used to clean up all the outstanding ELS commands on a
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
-
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
- }
+ /* Cancell all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
return;
}
/**
- * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA.
+ * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine is used to clean up all the outstanding ELS commands on a
lpfc_sli_issue_abort_iotag(phba, pring, piocb);
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
- }
+
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+
return;
}
/**
- * lpfc_send_els_failure_event: Posts an ELS command failure event.
+ * lpfc_send_els_failure_event - Posts an ELS command failure event
* @phba: Pointer to hba context object.
* @cmdiocbp: Pointer to command iocb which reported error.
* @rspiocbp: Pointer to response iocb which reported error.
}
/**
- * lpfc_send_els_event: Posts unsolicited els event.
+ * lpfc_send_els_event - Posts unsolicited els event
* @vport: Pointer to vport object.
* @ndlp: Pointer FC node object.
* @cmd: ELS command code.
/**
- * lpfc_els_unsol_buffer: Process an unsolicited event data buffer.
+ * lpfc_els_unsol_buffer - Process an unsolicited event data buffer
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
* @vport: pointer to a host virtual N_Port data structure.
}
/**
- * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier.
+ * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
* @phba: pointer to lpfc hba data structure.
* @vpi: host virtual N_Port identifier.
*
}
/**
- * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring.
+ * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
* @elsiocb: pointer to lpfc els iocb data structure.
}
/**
- * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr.
+ * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr
* @phba: pointer to lpfc hba data structure.
* @vport: pointer to a virtual N_Port data structure.
*
}
/**
- * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport.
+ * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_register_new_vport: Register a new vport with a HBA.
+ * lpfc_register_new_vport - Register a new vport with a HBA
* @phba: pointer to lpfc hba data structure.
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
}
/**
- * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command.
+ * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_fdisc: Issue a fdisc iocb command.
+ * lpfc_issue_els_fdisc - Issue a fdisc iocb command
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
}
/**
- * lpfc_cmpl_els_npiv_logo: Completion function with vport logo.
+ * lpfc_cmpl_els_npiv_logo - Completion function with vport logo
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_els_npiv_logo: Issue a logo off a vport.
+ * lpfc_issue_els_npiv_logo - Issue a logo off a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
*
}
/**
- * lpfc_fabric_block_timeout: Handler function to the fabric block timer.
+ * lpfc_fabric_block_timeout - Handler function to the fabric block timer
* @ptr: holder for the timer function associated data.
*
* This routine is invoked by the fabric iocb block timer after
}
/**
- * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list.
+ * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list
* @phba: pointer to lpfc hba data structure.
*
* This routine issues one fabric iocb from the driver internal list to
}
/**
- * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command.
+ * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command
* @phba: pointer to lpfc hba data structure.
*
* This routine unblocks the issuing fabric iocb command. The function
}
/**
- * lpfc_block_fabric_iocbs: Block issuing fabric iocb command.
+ * lpfc_block_fabric_iocbs - Block issuing fabric iocb command
* @phba: pointer to lpfc hba data structure.
*
* This routine blocks the issuing fabric iocb for a specified amount of
}
/**
- * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb.
+ * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
}
/**
- * lpfc_issue_fabric_iocb: Issue a fabric iocb command.
+ * lpfc_issue_fabric_iocb - Issue a fabric iocb command
* @phba: pointer to lpfc hba data structure.
* @iocb: pointer to lpfc command iocb data structure.
*
}
/**
- * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list
* @vport: pointer to a virtual N_Port data structure.
*
* This routine aborts all the IOCBs associated with a @vport from the
LIST_HEAD(completions);
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list
* @ndlp: pointer to a node-list data structure.
*
* This routine aborts all the IOCBs associated with an @ndlp from the
void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
{
LIST_HEAD(completions);
- struct lpfc_hba *phba = ndlp->vport->phba;
+ struct lpfc_hba *phba = ndlp->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list.
+ * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list
* @phba: pointer to lpfc hba data structure.
*
* This routine aborts all the IOCBs currently on the driver internal
void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
{
LIST_HEAD(completions);
- struct lpfc_iocbq *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_splice_init(&phba->fabric_iocb_list, &completions);
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
return;
}
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
"rport terminate: sid:x%x did:x%x flg:x%x",
}
/**
- * lpfc_alloc_fast_evt: Allocates data structure for posting event.
+ * lpfc_alloc_fast_evt - Allocates data structure for posting event
* @phba: Pointer to hba context object.
*
* This function is called from the functions which need to post
}
/**
- * lpfc_free_fast_evt: Frees event data structure.
+ * lpfc_free_fast_evt - Frees event data structure
* @phba: Pointer to hba context object.
* @evt: Event object which need to be freed.
*
}
/**
- * lpfc_send_fastpath_evt: Posts events generated from fast path.
+ * lpfc_send_fastpath_evt - Posts events generated from fast path
* @phba: Pointer to hba context object.
* @evtp: Event data structure.
*
NLP_STE_UNUSED_NODE);
}
/**
- * lpfc_initialize_node: Initialize all fields of node object.
+ * lpfc_initialize_node - Initialize all fields of node object
* @vport: Pointer to Virtual Port object.
* @ndlp: Pointer to FC node object.
* @did: FC_ID of the node.
- * This function is always called when node object need to
- * be initialized. It initializes all the fields of the node
- * object.
+ *
+ * This function is always called when node object need to be initialized.
+ * It initializes all the fields of the node object. Although the reference
+ * to phba from @ndlp can be obtained indirectly through it's reference to
+ * @vport, a direct reference to phba is taken here by @ndlp. This is due
+ * to the life-span of the @ndlp might go beyond the existence of @vport as
+ * the final release of ndlp is determined by its reference count. And, the
+ * operation on @ndlp needs the reference to phba.
**/
static inline void
lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
ndlp->nlp_DID = did;
ndlp->vport = vport;
+ ndlp->phba = vport->phba;
ndlp->nlp_sid = NLP_NO_SID;
kref_init(&ndlp->kref);
NLP_INT_NODE_ACT(ndlp);
struct lpfc_sli *psli;
struct lpfc_sli_ring *pring;
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *icmd;
uint32_t rpi, i;
lpfc_fabric_abort_nport(ndlp);
}
}
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- icmd = &iocb->iocb;
- icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl)(phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
return 0;
}
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
- if (rc == MBX_NOT_FINISHED) {
+ if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
- }
+
+ if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
+ "1836 Could not issue "
+ "unreg_login(all_rpis) status %d\n", rc);
}
}
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
- if (rc == MBX_NOT_FINISHED) {
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+
+ if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
"1815 Could not issue "
- "unreg_did (default rpis)\n");
- mempool_free(mbox, phba->mbox_mem_pool);
- }
+ "unreg_did (default rpis) status %d\n",
+ rc);
}
}
if (ndlp->nlp_flag & NLP_RCV_PLOGI)
return NULL;
- spin_lock_irq(shost->host_lock);
- ndlp->nlp_flag |= NLP_NPR_2B_DISC;
- spin_unlock_irq(shost->host_lock);
-
/* Since this node is marked for discovery,
* delay timeout is not needed.
*/
lpfc_cancel_retry_delay_tmo(vport, ndlp);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_NPR_2B_DISC;
+ spin_unlock_irq(shost->host_lock);
} else
ndlp = NULL;
} else {
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- icmd = &iocb->iocb;
- icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
static void
lpfc_nlp_remove(ndlp->vport, ndlp);
/* clear the ndlp active flag for all release cases */
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
NLP_CLR_NODE_ACT(ndlp);
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
/* free ndlp memory for final ndlp release */
if (NLP_CHK_FREE_REQ(ndlp)) {
kfree(ndlp->lat_data);
- mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool);
+ mempool_free(ndlp, ndlp->phba->nlp_mem_pool);
}
}
* ndlp reference count that is in the process of being
* released.
*/
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) {
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
"node put: did:x%x flg:x%x refcnt:x%x",
ndlp->nlp_DID, ndlp->nlp_flag,
atomic_read(&ndlp->kref.refcount));
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
/* Check the ndlp memory free acknowledge flag to avoid the
* possible race condition that kref_put got invoked again
static DEFINE_IDR(lpfc_hba_index);
/**
- * lpfc_config_port_prep: Perform lpfc initialization prior to config port.
+ * lpfc_config_port_prep - Perform lpfc initialization prior to config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization prior to issuing the CONFIG_PORT
}
/**
- * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd.
+ * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox
- * command used for getting wake up parameters.
+ * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_port_post: Perform lpfc initialization after config port.
+ * lpfc_config_port_post - Perform lpfc initialization after config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization after the CONFIG_PORT mailbox
lpfc_config_port_post(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
struct lpfc_dmabuf *mp;
sizeof (struct lpfc_name));
memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
sizeof (struct lpfc_name));
+
+ /* Update the fc_host data structures with new wwn. */
+ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+ fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
/* If no serial number in VPD data, use low 6 bytes of WWNN */
/* This should be consolidated into parse_vpd ? - mr */
if (phba->SerialNumber[0] == 0) {
}
/**
- * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset.
+ * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do LPFC uninitialization before the HBA is reset when
}
/**
- * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset.
+ * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do uninitialization after the HBA is reset when bring
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *mp, *next_mp;
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
LIST_HEAD(completions);
int i;
pring->txcmplq_cnt = 0;
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq,
- list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
lpfc_sli_abort_iocb_ring(phba, pring);
spin_lock_irq(&phba->hbalock);
}
/**
- * lpfc_hb_timeout: The HBA-timer timeout handler.
+ * lpfc_hb_timeout - The HBA-timer timeout handler
* @ptr: unsigned long holds the pointer to lpfc hba data structure.
*
* This is the HBA-timer timeout handler registered to the lpfc driver. When
}
/**
- * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function.
+ * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_hb_timeout_handler: The HBA-timer timeout handler.
+ * lpfc_hb_timeout_handler - The HBA-timer timeout handler
* @phba: pointer to lpfc hba data structure.
*
* This is the actual HBA-timer timeout handler to be invoked by the worker
}
/**
- * lpfc_offline_eratt: Bring lpfc offline on hardware error attention.
+ * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to bring the HBA offline when HBA hardware error
}
/**
- * lpfc_handle_eratt: The HBA hardware error handler.
+ * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the deferred HBA hardware error
+ * conditions. This type of error is indicated by HBA by setting ER1
+ * and another ER bit in the host status register. The driver will
+ * wait until the ER1 bit clears before handling the error condition.
+ **/
+static void
+lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
+{
+ uint32_t old_host_status = phba->work_hs;
+ struct lpfc_sli_ring *pring;
+ struct lpfc_sli *psli = &phba->sli;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0479 Deferred Adapter Hardware Error "
+ "Data: x%x x%x x%x\n",
+ phba->work_hs,
+ phba->work_status[0], phba->work_status[1]);
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+
+
+ /*
+ * Firmware stops when it triggred erratt. That could cause the I/Os
+ * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
+ * SCSI layer retry it after re-establishing link.
+ */
+ pring = &psli->ring[psli->fcp_ring];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+
+ /*
+ * There was a firmware error. Take the hba offline and then
+ * attempt to restart it.
+ */
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+
+ /* Wait for the ER1 bit to clear.*/
+ while (phba->work_hs & HS_FFER1) {
+ msleep(100);
+ phba->work_hs = readl(phba->HSregaddr);
+ /* If driver is unloading let the worker thread continue */
+ if (phba->pport->load_flag & FC_UNLOADING) {
+ phba->work_hs = 0;
+ break;
+ }
+ }
+
+ /*
+ * This is to ptrotect against a race condition in which
+ * first write to the host attention register clear the
+ * host status register.
+ */
+ if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
+ phba->work_hs = old_host_status & ~HS_FFER1;
+
+ phba->hba_flag &= ~DEFER_ERATT;
+ phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
+ phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
+}
+
+/**
+ * lpfc_handle_eratt - The HBA hardware error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the following HBA hardware error
(char *) &board_event,
LPFC_NL_VENDOR_ID);
+ if (phba->hba_flag & DEFER_ERATT)
+ lpfc_handle_deferred_eratt(phba);
+
if (phba->work_hs & HS_FFER6) {
/* Re-establishing Link */
lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
}
/**
- * lpfc_handle_latt: The HBA link event handler.
+ * lpfc_handle_latt - The HBA link event handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked from the worker thread to handle a HBA host
}
/**
- * lpfc_parse_vpd: Parse VPD (Vital Product Data).
+ * lpfc_parse_vpd - Parse VPD (Vital Product Data)
* @phba: pointer to lpfc hba data structure.
* @vpd: pointer to the vital product data.
* @len: length of the vital product data in bytes.
}
/**
- * lpfc_get_hba_model_desc: Retrieve HBA device model name and description.
+ * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
* @phba: pointer to lpfc hba data structure.
* @mdp: pointer to the data structure to hold the derived model name.
* @descp: pointer to the data structure to hold the derived description.
m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
- m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LP2105", max_speed, "PCIe"};
+ GE = 1;
break;
case PCI_DEVICE_ID_ZMID:
m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
}
/**
- * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring.
+ * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a IOCB ring.
* @cnt: the number of IOCBs to be posted to the IOCB ring.
}
/**
- * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring.
+ * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
* @phba: pointer to lpfc hba data structure.
*
* This routine posts initial receive IOCB buffers to the ELS ring. The
#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
/**
- * lpfc_sha_init: Set up initial array of hash table entries.
+ * lpfc_sha_init - Set up initial array of hash table entries
* @HashResultPointer: pointer to an array as hash table.
*
* This routine sets up the initial values to the array of hash table entries
}
/**
- * lpfc_sha_iterate: Iterate initial hash table with the working hash table.
+ * lpfc_sha_iterate - Iterate initial hash table with the working hash table
* @HashResultPointer: pointer to an initial/result hash table.
* @HashWorkingPointer: pointer to an working hash table.
*
}
/**
- * lpfc_challenge_key: Create challenge key based on WWPN of the HBA.
+ * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
* @RandomChallenge: pointer to the entry of host challenge random number array.
* @HashWorking: pointer to the entry of the working hash array.
*
}
/**
- * lpfc_hba_init: Perform special handling for LC HBA initialization.
+ * lpfc_hba_init - Perform special handling for LC HBA initialization
* @phba: pointer to lpfc hba data structure.
* @hbainit: pointer to an array of unsigned 32-bit integers.
*
}
/**
- * lpfc_cleanup: Performs vport cleanups before deleting a vport.
+ * lpfc_cleanup - Performs vport cleanups before deleting a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine performs the necessary cleanups before deleting the @vport.
}
/**
- * lpfc_stop_vport_timers: Stop all the timers associated with a vport.
+ * lpfc_stop_vport_timers - Stop all the timers associated with a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine stops all the timers associated with a @vport. This function
}
/**
- * lpfc_stop_phba_timers: Stop all the timers associated with an HBA.
+ * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine stops all the timers associated with a HBA. This function is
}
/**
- * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked.
+ * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as blocked. Once the HBA's
}
/**
- * lpfc_online: Initialize and bring a HBA online.
+ * lpfc_online - Initialize and bring a HBA online
* @phba: pointer to lpfc hba data structure.
*
* This routine initializes the HBA and brings a HBA online. During this
}
/**
- * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked.
+ * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as not blocked. Once the
}
/**
- * lpfc_offline_prep: Prepare a HBA to be brought offline.
+ * lpfc_offline_prep - Prepare a HBA to be brought offline
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to prepare a HBA to be brought offline. It performs
}
/**
- * lpfc_offline: Bring a HBA offline.
+ * lpfc_offline - Bring a HBA offline
* @phba: pointer to lpfc hba data structure.
*
* This routine actually brings a HBA offline. It stops all the timers
}
/**
- * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists.
+ * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
* @phba: pointer to lpfc hba data structure.
*
* This routine is to free all the SCSI buffers and IOCBs from the driver
}
/**
- * lpfc_create_port: Create an FC port.
+ * lpfc_create_port - Create an FC port
* @phba: pointer to lpfc hba data structure.
* @instance: a unique integer ID to this FC port.
* @dev: pointer to the device data structure.
}
/**
- * destroy_port: Destroy an FC port.
+ * destroy_port - destroy an FC port
* @vport: pointer to an lpfc virtual N_Port data structure.
*
* This routine destroys a FC port from the upper layer protocol. All the
}
/**
- * lpfc_get_instance: Get a unique integer ID.
+ * lpfc_get_instance - Get a unique integer ID
*
* This routine allocates a unique integer ID from lpfc_hba_index pool. It
* uses the kernel idr facility to perform the task.
}
/**
- * lpfc_scan_finished: method for SCSI layer to detect whether scan is done.
+ * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
* @shost: pointer to SCSI host data structure.
* @time: elapsed time of the scan in jiffies.
*
}
/**
- * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port.
+ * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
* @shost: pointer to SCSI host data structure.
*
* This routine initializes a given SCSI host attributes on a FC port. The
}
/**
- * lpfc_enable_msix: Enable MSI-X interrupt mode.
+ * lpfc_enable_msix - Enable MSI-X interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors. The kernel
}
/**
- * lpfc_disable_msix: Disable MSI-X interrupt mode.
+ * lpfc_disable_msix - Disable MSI-X interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to release the MSI-X vectors and then disable the
}
/**
- * lpfc_enable_msi: Enable MSI interrupt mode.
+ * lpfc_enable_msi - Enable MSI interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI interrupt mode. The kernel
}
/**
- * lpfc_disable_msi: Disable MSI interrupt mode.
+ * lpfc_disable_msi - Disable MSI interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable the MSI interrupt mode. The driver
}
/**
- * lpfc_log_intr_mode: Log the active interrupt mode
+ * lpfc_log_intr_mode - Log the active interrupt mode
* @phba: pointer to lpfc hba data structure.
* @intr_mode: active interrupt mode adopted.
*
}
/**
- * lpfc_enable_intr: Enable device interrupt.
+ * lpfc_enable_intr - Enable device interrupt
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable device interrupt and associate driver's
}
/**
- * lpfc_disable_intr: Disable device interrupt.
+ * lpfc_disable_intr - Disable device interrupt
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable device interrupt and disassociate the
}
/**
- * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem.
+ * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
*
}
/**
- * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem.
+ * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem. When an
lpfc_free_sysfs_attr(vport);
- kthread_stop(phba->worker_thread);
-
/* Release all the vports against this physical port */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
* clears the rings, discards all mailbox commands, and resets
* the HBA.
*/
+
+ /* HBA interrupt will be diabled after this call */
lpfc_sli_hba_down(phba);
+ /* Stop kthread signal shall trigger work_done one more time */
+ kthread_stop(phba->worker_thread);
+ /* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
lpfc_stop_phba_timers(phba);
}
/**
- * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management.
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
* @pdev: pointer to PCI device
* @msg: power management message
*
}
/**
- * lpfc_pci_resume_one: lpfc PCI func to resume device for power management.
+ * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem to support
}
/**
- * lpfc_io_error_detected: Driver method for handling PCI I/O error detected.
+ * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
}
/**
- * lpfc_io_slot_reset: Restart a PCI device from scratch.
+ * lpfc_io_slot_reset - Restart a PCI device from scratch
* @pdev: pointer to PCI device.
*
* This routine is registered to the PCI subsystem for error handling. This is
}
/**
- * lpfc_io_resume: Resume PCI I/O operation.
+ * lpfc_io_resume - Resume PCI I/O operation
* @pdev: pointer to PCI device
*
* This routine is registered to the PCI subsystem for error handling. It is
};
/**
- * lpfc_init: lpfc module initialization routine.
+ * lpfc_init - lpfc module initialization routine
*
* This routine is to be invoked when the lpfc module is loaded into the
* kernel. The special kernel macro module_init() is used to indicate the
}
/**
- * lpfc_exit: lpfc module removal routine.
+ * lpfc_exit - lpfc module removal routine
*
* This routine is invoked when the lpfc module is removed from the kernel.
* The special kernel macro module_exit() is used to indicate the role of
#define LOG_FCP 0x40 /* FCP traffic history */
#define LOG_NODE 0x80 /* Node table events */
#define LOG_TEMP 0x100 /* Temperature sensor events */
-#define LOG_BG 0x200 /* BlockBuard events */
+#define LOG_BG 0x200 /* BlockGuard events */
#define LOG_MISC 0x400 /* Miscellaneous events */
#define LOG_SLI 0x800 /* SLI events */
#define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */
#include "lpfc_compat.h"
/**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory.
+ * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @offset: offset for dumping VPD memory mailbox command.
}
/**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params.
+ * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
+ *
* This function create a dump memory mailbox command to dump wake up
* parameters.
*/
}
/**
- * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param.
+ * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_async: Prepare a mailbox command for enabling HBA async event.
+ * lpfc_config_async - Prepare a mailbox command for enabling HBA async event
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @ring: ring number for the asynchronous event to be configured.
}
/**
- * lpfc_heart_beat: Prepare a mailbox command for heart beat.
+ * lpfc_heart_beat - Prepare a mailbox command for heart beat
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_read_la: Prepare a mailbox command for reading HBA link attention.
+ * lpfc_read_la - Prepare a mailbox command for reading HBA link attention
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @mp: DMA buffer memory for reading the link attention information into.
}
/**
- * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention.
+ * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA.
+ * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_config_msi: Prepare a mailbox command for configuring msi-x.
+ * lpfc_config_msi - Prepare a mailbox command for configuring msi-x
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA.
+ * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @topology: the link topology for the link to be initialized to.
}
/**
- * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters.
+ * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @vpi: virtual N_Port identifier.
}
/**
- * lpfc_unreg_did: Prepare a mailbox command for unregistering DID.
+ * lpfc_unreg_did - Prepare a mailbox command for unregistering DID
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
}
/**
- * lpfc_read_config: Prepare a mailbox command for reading HBA configuration.
+ * lpfc_read_config - Prepare a mailbox command for reading HBA configuration
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats.
+ * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_reg_login: Prepare a mailbox command for registering remote login.
+ * lpfc_reg_login - Prepare a mailbox command for registering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
}
/**
- * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login.
+ * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @rpi: remote port identifier
}
/**
- * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier.
+ * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port).
}
/**
- * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id.
+ * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @pmb: pointer to the driver internal queue element for mailbox command.
}
/**
- * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB)
+ * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB)
* @phba: pointer to lpfc hba data structure.
*
* This routine sets up and initializes the IOCB rings in the Port Control
}
/**
- * lpfc_read_rev: Prepare a mailbox command for reading HBA revision.
+ * lpfc_read_rev - Prepare a mailbox command for reading HBA revision
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2.
+ * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
}
/**
- * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3.
+ * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
}
/**
- * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5.
+ * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
}
/**
- * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ.
+ * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ
* @phba: pointer to lpfc hba data structure.
* @id: HBQ identifier.
* @hbq_desc: pointer to the HBA descriptor data structure.
}
/**
- * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring.
+ * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring
* @phba: pointer to lpfc hba data structure.
* @ring:
* @pmb: pointer to the driver internal queue element for mailbox command.
}
/**
- * lpfc_config_port: Prepare a mailbox command for configuring port.
+ * lpfc_config_port - Prepare a mailbox command for configuring port
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_kill_board: Prepare a mailbox command for killing board.
+ * lpfc_kill_board - Prepare a mailbox command for killing board
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue.
+ * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue.
+ * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue
* @phba: pointer to lpfc hba data structure.
*
* Driver maintains a internal mailbox command queue implemented as a linked
}
/**
- * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list.
+ * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
}
/**
- * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value.
+ * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
* @phba: pointer to lpfc hba data structure.
* @cmd: mailbox command code.
*
/**
- * lpfc_mem_alloc: create and allocate all PCI and memory pools
+ * lpfc_mem_alloc - create and allocate all PCI and memory pools
* @phba: HBA to allocate pools for
*
* Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
}
/**
- * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
* @phba: HBA to free memory for
*
* Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
* lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist. Also frees the VPI bitmask.
+ * lpfc_nodelist. Also frees the VPI bitmask
*
* Returns: None
**/
}
/**
- * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool
+ * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool
* @phba: HBA which owns the pool to allocate from
* @mem_flags: indicates if this is a priority (MEM_PRI) allocation
* @handle: used to return the DMA-mapped address of the mbuf
}
/**
- * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
+ * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
* @phba: HBA which owns the pool to return to
* @virt: mbuf to free
* @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
}
/**
- * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
+ * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
* @phba: HBA which owns the pool to return to
* @virt: mbuf to free
* @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
* Returns: None
**/
void
-
lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
{
unsigned long iflags;
}
/**
- * lpfc_els_hbq_alloc: Allocate an HBQ buffer
+ * lpfc_els_hbq_alloc - Allocate an HBQ buffer
* @phba: HBA to allocate HBQ buffer for
*
* Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
}
/**
- * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
* @phba: HBA buffer was allocated for
* @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
*
}
/**
- * lpfc_in_buf_free: Free a DMA buffer
+ * lpfc_in_buf_free - Free a DMA buffer
* @phba: HBA buffer is associated with
* @mp: Buffer to free
*
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *cmd;
/* Abort outstanding I/O on NPort <nlp_DID> */
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY,
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+
lpfc_cancel_retry_delay_tmo(phba->pport, ndlp);
return 0;
}
}
/**
- * lpfc_update_stats: Update statistical data for the command completion.
+ * lpfc_update_stats - Update statistical data for the command completion
* @phba: Pointer to HBA object.
* @lpfc_cmd: lpfc scsi command object pointer.
*
}
/**
- * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change
- * event.
+ * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event
* @phba: Pointer to HBA context object.
* @vport: Pointer to vport object.
* @ndlp: Pointer to FC node associated with the target.
}
/**
- * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread.
+ * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
* @phba: The Hba for which this call is being executed.
*
* This routine is called when there is resource error in driver or firmware.
}
/**
- * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread.
+ * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread
* @phba: The Hba for which this call is being executed.
*
* This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine
**/
static inline void
lpfc_rampup_queue_depth(struct lpfc_vport *vport,
- struct scsi_device *sdev)
+ uint32_t queue_depth)
{
unsigned long flags;
struct lpfc_hba *phba = vport->phba;
uint32_t evt_posted;
atomic_inc(&phba->num_cmd_success);
- if (vport->cfg_lun_queue_depth <= sdev->queue_depth)
+ if (vport->cfg_lun_queue_depth <= queue_depth)
return;
spin_lock_irqsave(&phba->hbalock, flags);
if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
}
/**
- * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler.
+ * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler
* @phba: The Hba for which this call is being executed.
*
* This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker
}
/**
- * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler.
+ * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler
* @phba: The Hba for which this call is being executed.
*
* This routine is called to process WORKER_RAMP_UP_QUEUE event for worker
}
/**
- * lpfc_scsi_dev_block: set all scsi hosts to block state.
+ * lpfc_scsi_dev_block - set all scsi hosts to block state
* @phba: Pointer to HBA context object.
*
* This function walks vport list and set each SCSI host to block state
}
/**
- * lpfc_new_scsi_buf: Scsi buffer allocator.
+ * lpfc_new_scsi_buf - Scsi buffer allocator
* @vport: The virtual port for which this call being executed.
*
* This routine allocates a scsi buffer, which contains all the necessary
}
/**
- * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba.
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
* @phba: The Hba for which this call is being executed.
*
* This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
}
/**
- * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list.
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is being released.
*
}
/**
- * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer.
+ * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
*
* Due to difference in data length between DIF/non-DIF paths,
* we need to set word 4 of IOCB here
*/
- iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd));
+ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
return 0;
}
/**
* lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command
* @sc: in: SCSI command
- * @apptagmask out: app tag mask
- * @apptagval out: app tag value
- * @reftag out: ref tag (reference tag)
+ * @apptagmask: out: app tag mask
+ * @apptagval: out: app tag value
+ * @reftag: out: ref tag (reference tag)
*
* Description:
* Extract DIF paramters from the command if possible. Otherwise,
*/
cmd->sense_buffer[8] = 0; /* Information */
cmd->sense_buffer[9] = 0xa; /* Add. length */
- do_div(bghm, cmd->device->sector_size);
+ bghm /= cmd->device->sector_size;
failing_sector = scsi_get_lba(cmd);
failing_sector += bghm;
}
/**
- * lpfc_send_scsi_error_event: Posts an event when there is SCSI error.
+ * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
* @phba: Pointer to hba context object.
* @vport: Pointer to vport object.
* @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
}
/**
- * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather.
+ * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is going to be un-mapped.
*
}
/**
- * lpfc_handler_fcp_err: FCP response handler.
+ * lpfc_handler_fcp_err - FCP response handler
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @rsp_iocb: The response IOCB which contains FCP error.
}
/**
- * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine.
+ * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
* @phba: The Hba for which this call is being executed.
* @pIocbIn: The command IOCBQ for the scsi cmnd.
* @pIocbOut: The response IOCBQ for the scsi cmnd .
struct lpfc_nodelist *pnode = rdata->pnode;
struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
int result;
- struct scsi_device *sdev, *tmp_sdev;
+ struct scsi_device *tmp_sdev;
int depth = 0;
unsigned long flags;
struct lpfc_fast_path_event *fast_path_evt;
+ struct Scsi_Host *shost = cmd->device->host;
+ uint32_t queue_depth, scsi_id;
lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
lpfc_update_stats(phba, lpfc_cmd);
result = cmd->result;
- sdev = cmd->device;
if (vport->cfg_max_scsicmpl_time &&
time_after(jiffies, lpfc_cmd->start_time +
msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
if (pnode && NLP_CHK_NODE_ACT(pnode)) {
if (pnode->cmd_qdepth >
atomic_read(&pnode->cmd_pending) &&
pnode->last_change_time = jiffies;
}
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
} else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) &&
time_after(jiffies, pnode->last_change_time +
msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
pnode->cmd_qdepth += pnode->cmd_qdepth *
LPFC_TGTQ_RAMPUP_PCENT / 100;
if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH)
pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH;
pnode->last_change_time = jiffies;
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
}
}
lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
+
+ /* The sdev is not guaranteed to be valid post scsi_done upcall. */
+ queue_depth = cmd->device->queue_depth;
+ scsi_id = cmd->device->id;
cmd->scsi_done(cmd);
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
* If there is a thread waiting for command completion
* wake up the thread.
*/
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
return;
}
if (!result)
- lpfc_rampup_queue_depth(vport, sdev);
+ lpfc_rampup_queue_depth(vport, queue_depth);
if (!result && pnode && NLP_CHK_NODE_ACT(pnode) &&
((jiffies - pnode->last_ramp_up_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
((jiffies - pnode->last_q_full_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
- (vport->cfg_lun_queue_depth > sdev->queue_depth)) {
- shost_for_each_device(tmp_sdev, sdev->host) {
+ (vport->cfg_lun_queue_depth > queue_depth)) {
+ shost_for_each_device(tmp_sdev, shost) {
if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
- if (tmp_sdev->id != sdev->id)
+ if (tmp_sdev->id != scsi_id)
continue;
if (tmp_sdev->ordered_tags)
scsi_adjust_queue_depth(tmp_sdev,
}
lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode,
0xFFFFFFFF,
- sdev->queue_depth - 1, sdev->queue_depth);
+ queue_depth , queue_depth + 1);
}
/*
NLP_CHK_NODE_ACT(pnode)) {
pnode->last_q_full_time = jiffies;
- shost_for_each_device(tmp_sdev, sdev->host) {
- if (tmp_sdev->id != sdev->id)
+ shost_for_each_device(tmp_sdev, shost) {
+ if (tmp_sdev->id != scsi_id)
continue;
depth = scsi_track_queue_full(tmp_sdev,
tmp_sdev->queue_depth - 1);
* scsi_track_queue_full.
*/
if (depth == -1)
- depth = sdev->host->cmd_per_lun;
+ depth = shost->cmd_per_lun;
if (depth) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
* If there is a thread waiting for command completion
* wake up the thread.
*/
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
/**
- * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB.
+ * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
* @data: A pointer to the immediate command data portion of the IOCB.
* @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
*
}
/**
- * lpfc_scsi_prep_cmnd: Routine to convert scsi cmnd to FCP information unit.
+ * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: The scsi command which needs to send.
* @pnode: Pointer to lpfc_nodelist.
}
/**
- * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit.
+ * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @lun: Logical unit number.
}
/**
- * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command.
+ * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
* @phba: The Hba for which this call is being executed.
* @cmdiocbq: Pointer to lpfc_iocbq data structure.
* @rspiocbq: Pointer to lpfc_iocbq data structure.
}
/**
- * lpfc_scsi_tgt_reset: Target reset handler.
+ * lpfc_scsi_tgt_reset - Target reset handler
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure
* @vport: The virtual port for which this call is being executed.
* @tgt_id: Target ID.
}
/**
- * lpfc_info: Info entry point of scsi_host_template data structure.
+ * lpfc_info - Info entry point of scsi_host_template data structure
* @host: The scsi host for which this call is being executed.
*
* This routine provides module information about hba.
}
/**
- * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba.
+ * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba
* @phba: The Hba for which this call is being executed.
*
* This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo.
}
/**
- * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA.
+ * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA
* @phba: The Hba for which this call is being executed.
*
* This routine starts the fcp_poll_timer of @phba.
}
/**
- * lpfc_poll_timeout: Restart polling timer.
+ * lpfc_poll_timeout - Restart polling timer
* @ptr: Map to lpfc_hba data structure pointer.
*
* This routine restarts fcp_poll timer, when FCP ring polling is enable
}
/**
- * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data
- * structure.
+ * lpfc_queuecommand - scsi_host_template queuecommand entry point
* @cmnd: Pointer to scsi_cmnd data structure.
* @done: Pointer to done routine.
*
}
/**
- * lpfc_block_error_handler: Routine to block error handler.
+ * lpfc_block_error_handler - Routine to block error handler
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD.
}
/**
- * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data
- *structure.
+ * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine aborts @cmnd pending in base driver.
}
/**
- * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template
- *data structure.
+ * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine does a device reset by sending a TARGET_RESET task management
*
* Return code :
* 0x2003 - Error
- * 0ex2002 - Success
+ * 0x2002 - Success
**/
static int
lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host
- * Template data structure.
+ * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine does target reset to all target on @cmnd->device->host.
}
/**
- * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data
- * structure.
+ * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
* @sdev: Pointer to scsi_device.
*
* This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's
}
/**
- * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data
- * structure.
+ * lpfc_slave_configure - scsi_host_template slave_configure entry point
* @sdev: Pointer to scsi_device.
*
* This routine configures following items
}
/**
- * lpfc_slave_destroy: slave_destroy entry point of SHT data structure.
+ * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
* @sdev: Pointer to scsi_device.
*
* This routine sets @sdev hostatdata filed to null.
} lpfc_iocb_type;
/**
- * lpfc_cmd_iocb: Get next command iocb entry in the ring.
+ * lpfc_cmd_iocb - Get next command iocb entry in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_resp_iocb: Get next response iocb entry in the ring.
+ * lpfc_resp_iocb - Get next response iocb entry in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
* This function is called with hbalock held. This function
}
/**
- * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held. This function
}
/**
- * __lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
}
/**
- * lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
}
/**
- * lpfc_sli_iocb_cmd_type: Get the iocb type.
- * @iocb_cmnd : iocb command code.
+ * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list.
+ * @phba: Pointer to HBA context object.
+ * @iocblist: List of IOCBs.
+ * @ulpstatus: ULP status in IOCB command field.
+ * @ulpWord4: ULP word-4 in IOCB command field.
+ *
+ * This function is called with a list of IOCBs to cancel. It cancels the IOCB
+ * on the list by invoking the complete callback function associated with the
+ * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond
+ * fields.
+ **/
+void
+lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist,
+ uint32_t ulpstatus, uint32_t ulpWord4)
+{
+ struct lpfc_iocbq *piocb;
+
+ while (!list_empty(iocblist)) {
+ list_remove_head(iocblist, piocb, struct lpfc_iocbq, list);
+
+ if (!piocb->iocb_cmpl)
+ lpfc_sli_release_iocbq(phba, piocb);
+ else {
+ piocb->iocb.ulpStatus = ulpstatus;
+ piocb->iocb.un.ulpWord[4] = ulpWord4;
+ (piocb->iocb_cmpl) (phba, piocb, piocb);
+ }
+ }
+ return;
+}
+
+/**
+ * lpfc_sli_iocb_cmd_type - Get the iocb type
+ * @iocb_cmnd: iocb command code.
*
* This function is called by ring event handler function to get the iocb type.
* This function translates the iocb command to an iocb command type used to
}
/**
- * lpfc_sli_ring_map: Issue config_ring mbox for all rings.
+ * lpfc_sli_ring_map - Issue config_ring mbox for all rings
* @phba: Pointer to HBA context object.
*
* This function is called from SLI initialization code
}
/**
- * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq.
+ * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to the driver iocb object.
}
/**
- * lpfc_sli_ringtx_get: Get first element of the txq.
+ * lpfc_sli_ringtx_get - Get first element of the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring.
+ * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_next_iotag: Get an iotag for the iocb.
+ * lpfc_sli_next_iotag - Get an iotag for the iocb
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
}
/**
- * lpfc_sli_submit_iocb: Submit an iocb to the firmware.
+ * lpfc_sli_submit_iocb - Submit an iocb to the firmware
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @iocb: Pointer to iocb slot in the ring.
}
/**
- * lpfc_sli_update_full_ring: Update the chip attention register.
+ * lpfc_sli_update_full_ring - Update the chip attention register
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_update_ring: Update chip attention register.
+ * lpfc_sli_update_ring - Update chip attention register
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_resume_iocb: Process iocbs in the txq.
+ * lpfc_sli_resume_iocb - Process iocbs in the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ.
+ * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
*
}
/**
- * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers.
+ * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held to free all the
}
/**
- * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware.
+ * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
* @hbq_buf: Pointer to HBQ buffer.
.profile = 0,
.ring_mask = (1 << LPFC_ELS_RING),
.buffer_count = 0,
- .init_count = 20,
- .add_count = 5,
+ .init_count = 40,
+ .add_count = 40,
};
/* HBQ for the extra ring if needed */
};
/**
- * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ.
+ * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
* @count: Number of HBQ buffers to be posted.
}
/**
- * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware.
+ * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware
* @phba: Pointer to HBA context object.
* @qno: HBQ number.
*
}
/**
- * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ.
+ * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ
* @phba: Pointer to HBA context object.
* @qno: HBQ queue number.
*
}
/**
- * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag.
+ * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
* @phba: Pointer to HBA context object.
* @tag: Tag of the hbq buffer.
*
}
/**
- * lpfc_sli_free_hbq: Give back the hbq buffer to firmware.
+ * lpfc_sli_free_hbq - Give back the hbq buffer to firmware
* @phba: Pointer to HBA context object.
* @hbq_buffer: Pointer to HBQ buffer.
*
}
/**
- * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox.
+ * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox
* @mbxCommand: mailbox command code.
*
* This function is called by the mailbox event handler function to verify
}
/**
- * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from
- * lpfc_sli_issue_mbox_wait.
+ * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler
* @phba: Pointer to HBA context object.
* @pmboxq: Pointer to mailbox command.
*
/**
- * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler.
+ * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler
* @phba: Pointer to HBA context object.
* @pmb: Pointer to mailbox object.
*
}
/**
- * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware.
+ * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held. This function processes all
}
/**
- * lpfc_sli_get_buff: Get the buffer associated with the buffer tag.
+ * lpfc_sli_get_buff - Get the buffer associated with the buffer tag
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @tag: buffer tag.
/**
- * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler.
+ * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @saveq: Pointer to the unsolicited iocb.
}
/**
- * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb.
+ * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @prspiocb: Pointer to response iocb object.
}
/**
- * lpfc_sli_process_sol_iocb: process solicited iocb completion.
+ * lpfc_sli_process_sol_iocb - process solicited iocb completion
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @saveq: Pointer to the response iocb to be processed.
* Ring <ringno> handler: unexpected completion IoTag
* <IoTag>
*/
- lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI,
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0322 Ring %d handler: "
"unexpected completion IoTag x%x "
"Data: x%x x%x x%x x%x\n",
}
/**
- * lpfc_sli_rsp_pointers_error: Response ring pointer error handler.
+ * lpfc_sli_rsp_pointers_error - Response ring pointer error handler
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
}
/**
- * lpfc_poll_eratt: Error attention polling timer timeout handler.
+ * lpfc_poll_eratt - Error attention polling timer timeout handler
* @ptr: Pointer to address of HBA context object.
*
* This function is invoked by the Error Attention polling timer when the
}
/**
- * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode.
+ * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode
* @phba: Pointer to HBA context object.
*
* This function is called from lpfc_queuecommand, lpfc_poll_timeout,
}
/**
- * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring.
+ * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
}
/**
- * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings.
+ * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
}
/**
- * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring.
+ * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
{
LIST_HEAD(completions);
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *cmd = NULL;
if (pring->ringno == LPFC_ELS_RING) {
lpfc_fabric_abort_hba(phba);
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring.
+ * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring
* @phba: Pointer to HBA context object.
*
* This function flushes all iocbs in the fcp ring and frees all the iocb
{
LIST_HEAD(txq);
LIST_HEAD(txcmplq);
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
spin_unlock_irq(&phba->hbalock);
/* Flush the txq */
- while (!list_empty(&txq)) {
- iocb = list_get_first(&txq, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
/* Flush the txcmpq */
- while (!list_empty(&txcmplq)) {
- iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
}
/**
- * lpfc_sli_brdready: Check for host status bits.
+ * lpfc_sli_brdready - Check for host status bits
* @phba: Pointer to HBA context object.
* @mask: Bit mask to be checked.
*
#define BARRIER_TEST_PATTERN (0xdeadbeef)
/**
- * lpfc_reset_barrier: Make HBA ready for HBA reset.
+ * lpfc_reset_barrier - Make HBA ready for HBA reset
* @phba: Pointer to HBA context object.
*
* This function is called before resetting an HBA. This
}
/**
- * lpfc_sli_brdkill: Issue a kill_board mailbox command.
+ * lpfc_sli_brdkill - Issue a kill_board mailbox command
* @phba: Pointer to HBA context object.
*
* This function issues a kill_board mailbox command and waits for
}
/**
- * lpfc_sli_brdreset: Reset the HBA.
+ * lpfc_sli_brdreset - Reset the HBA
* @phba: Pointer to HBA context object.
*
* This function resets the HBA by writing HC_INITFF to the control
}
/**
- * lpfc_sli_brdrestart: Restart the HBA.
+ * lpfc_sli_brdrestart - Restart the HBA
* @phba: Pointer to HBA context object.
*
* This function is called in the SLI initialization code path to
}
/**
- * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart.
+ * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
* @phba: Pointer to HBA context object.
*
* This function is called after a HBA restart to wait for successful
}
/**
- * lpfc_sli_hbq_count: Get the number of HBQs to be configured.
+ * lpfc_sli_hbq_count - Get the number of HBQs to be configured
*
* This function calculates and returns the number of HBQs required to be
* configured.
}
/**
- * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries.
+ * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries
*
* This function adds the number of hbq entries in every HBQ to get
* the total number of hbq entries required for the HBA and returns
}
/**
- * lpfc_sli_hbq_size: Calculate memory required for all hbq entries.
+ * lpfc_sli_hbq_size - Calculate memory required for all hbq entries
*
* This function calculates amount of memory required for all hbq entries
* to be configured and returns the total memory required.
}
/**
- * lpfc_sli_hbq_setup: configure and initialize HBQs.
+ * lpfc_sli_hbq_setup - configure and initialize HBQs
* @phba: Pointer to HBA context object.
*
* This function is called during the SLI initialization to configure
}
/**
- * lpfc_sli_config_port: Issue config port mailbox command.
+ * lpfc_sli_config_port - Issue config port mailbox command
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
*
/**
- * lpfc_sli_hba_setup: SLI intialization function.
+ * lpfc_sli_hba_setup - SLI intialization function
* @phba: Pointer to HBA context object.
*
* This function is the main SLI intialization function. This function
/**
- * lpfc_mbox_timeout: Timeout call back function for mbox timer.
+ * lpfc_mbox_timeout - Timeout call back function for mbox timer
* @ptr: context object - pointer to hba structure.
*
* This is the callback function for mailbox timer. The mailbox
/**
- * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout.
+ * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout
* @phba: Pointer to HBA context object.
*
* This function is called from worker thread when a mailbox command times out.
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
+ /* Check the pmbox pointer first. There is a race condition
+ * between the mbox timeout handler getting executed in the
+ * worklist and the mailbox actually completing. When this
+ * race condition occurs, the mbox_active will be NULL.
+ */
+ spin_lock_irq(&phba->hbalock);
+ if (pmbox == NULL) {
+ lpfc_printf_log(phba, KERN_WARNING,
+ LOG_MBOX | LOG_SLI,
+ "0353 Active Mailbox cleared - mailbox timeout "
+ "exiting\n");
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+
/* Mbox cmd <mbxCommand> timeout */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
phba->pport->port_state,
phba->sli.sli_flag,
phba->sli.mbox_active);
+ spin_unlock_irq(&phba->hbalock);
/* Setting state unknown so lpfc_sli_abort_iocb_ring
* would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
}
/**
- * lpfc_sli_issue_mbox: Issue a mailbox command to firmware.
+ * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
* @phba: Pointer to HBA context object.
* @pmbox: Pointer to mailbox object.
* @flag: Flag indicating how the mailbox need to be processed.
goto out_not_finished;
}
+ /* If HBA has a deferred error attention, fail the iocb. */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+ goto out_not_finished;
+ }
+
psli = &phba->sli;
mb = &pmbox->mb;
}
/**
- * __lpfc_sli_ringtx_put: Add an iocb to the txq.
+ * __lpfc_sli_ringtx_put - Add an iocb to the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to address of newly added command iocb.
}
/**
- * lpfc_sli_next_iocb: Get the next iocb in the txq.
+ * lpfc_sli_next_iocb - Get the next iocb in the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to address of newly added command iocb.
}
/**
- * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb.
+ * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to command iocb.
if (unlikely(pci_channel_offline(phba->pcidev)))
return IOCB_ERROR;
+ /* If HBA has a deferred error attention, fail the iocb. */
+ if (unlikely(phba->hba_flag & DEFER_ERATT))
+ return IOCB_ERROR;
+
/*
* We should never get an IOCB if we are in a < LINK_DOWN state
*/
/**
- * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb.
+ * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to command iocb.
}
/**
- * lpfc_extra_ring_setup: Extra ring setup function.
+ * lpfc_extra_ring_setup - Extra ring setup function
* @phba: Pointer to HBA context object.
*
* This function is called while driver attaches with the
}
/**
- * lpfc_sli_async_event_handler: ASYNC iocb handler function.
+ * lpfc_sli_async_event_handler - ASYNC iocb handler function
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @iocbq: Pointer to iocb object.
uint16_t temp;
struct temp_event temp_event_data;
struct Scsi_Host *shost;
+ uint32_t *iocb_w;
icmd = &iocbq->iocb;
evt_code = icmd->un.asyncstat.evt_code;
if ((evt_code != ASYNC_TEMP_WARN) &&
(evt_code != ASYNC_TEMP_SAFE)) {
+ iocb_w = (uint32_t *) icmd;
lpfc_printf_log(phba,
KERN_ERR,
LOG_SLI,
"0346 Ring %d handler: unexpected ASYNC_STATUS"
- " evt_code 0x%x\n",
+ " evt_code 0x%x \n"
+ "W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n"
+ "W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n"
+ "W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n"
+ "W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n",
pring->ringno,
- icmd->un.asyncstat.evt_code);
+ icmd->un.asyncstat.evt_code,
+ iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3],
+ iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7],
+ iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11],
+ iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]);
+
return;
}
temp_event_data.data = (uint32_t)temp;
/**
- * lpfc_sli_setup: SLI ring setup function.
+ * lpfc_sli_setup - SLI ring setup function
* @phba: Pointer to HBA context object.
*
* lpfc_sli_setup sets up rings of the SLI interface with
}
/**
- * lpfc_sli_queue_setup: Queue initialization function.
+ * lpfc_sli_queue_setup - Queue initialization function
* @phba: Pointer to HBA context object.
*
* lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each
}
/**
- * lpfc_sli_host_down: Vport cleanup function.
+ * lpfc_sli_host_down - Vport cleanup function
* @vport: Pointer to virtual port object.
*
* lpfc_sli_host_down is called to clean up the resources
spin_unlock_irqrestore(&phba->hbalock, flags);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
- iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
return 1;
}
/**
- * lpfc_sli_hba_down: Resource cleanup function for the HBA.
+ * lpfc_sli_hba_down - Resource cleanup function for the HBA
* @phba: Pointer to HBA context object.
*
* This function cleans up all iocb, buffers, mailbox commands
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *buf_ptr;
LPFC_MBOXQ_t *pmb;
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
int i;
unsigned long flags = 0;
}
spin_unlock_irqrestore(&phba->hbalock, flags);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
spin_lock_irqsave(&phba->hbalock, flags);
list_splice_init(&phba->elsbuf, &completions);
}
/**
- * lpfc_sli_pcimem_bcopy: SLI memory copy function.
+ * lpfc_sli_pcimem_bcopy - SLI memory copy function
* @srcp: Source memory pointer.
* @destp: Destination memory pointer.
* @cnt: Number of words required to be copied.
/**
- * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq.
+ * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mp: Pointer to driver buffer object.
}
/**
- * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted
- * using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer
* @phba: Pointer to HBA context object.
*
* When HBQ is enabled, buffers are searched based on tags. This function
}
/**
- * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with
- * posted using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @tag: Buffer tag.
}
/**
- * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for
- * unsolicited ct and els events.
+ * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @phys: DMA address of the buffer.
}
/**
- * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs.
+ * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to driver command iocb object.
* @rspiocb: Pointer to driver response iocb object.
}
/**
- * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command.
+ * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to driver command iocb object.
* @rspiocb: Pointer to driver response iocb object.
}
/**
- * lpfc_sli_issue_abort_iotag: Abort function for a command iocb.
+ * lpfc_sli_issue_abort_iotag - Abort function for a command iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @cmdiocb: Pointer to driver command iocb object.
}
/**
- * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands
- * associated with a vport/SCSI target/lun.
+ * lpfc_sli_validate_fcp_iocb - find commands associated with a vport or LUN
* @iocbq: Pointer to driver iocb object.
* @vport: Pointer to driver virtual port object.
* @tgt_id: SCSI ID of the target.
* @lun_id: LUN ID of the scsi device.
* @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST
*
- * This function acts as iocb filter for functions which abort or count
+ * This function acts as an iocb filter for functions which abort or count
* all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return
* 0 if the filtering criteria is met for the given iocb and will return
* 1 if the filtering criteria is not met.
}
/**
- * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending.
+ * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending
* @vport: Pointer to virtual port.
* @tgt_id: SCSI ID of the target.
* @lun_id: LUN ID of the scsi device.
}
/**
- * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted
- * FCP iocb.
+ * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs
* @phba: Pointer to HBA context object
* @cmdiocb: Pointer to command iocb object.
* @rspiocb: Pointer to response iocb object.
}
/**
- * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands
- * pending on a SCSI host(vport)/target/lun.
+ * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN
* @vport: Pointer to virtual port.
* @pring: Pointer to driver SLI ring object.
* @tgt_id: SCSI ID of the target.
}
/**
- * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using
- * lpfc_sli_issue_iocb_wait.
+ * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler
* @phba: Pointer to HBA context object.
* @cmdiocbq: Pointer to command iocb.
* @rspiocbq: Pointer to response iocb.
}
/**
- * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands.
+ * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands
* @phba: Pointer to HBA context object..
* @pring: Pointer to sli ring.
* @piocb: Pointer to command iocb.
}
/**
- * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox.
+ * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox
* @phba: Pointer to HBA context object.
* @pmboxq: Pointer to driver mailbox object.
* @timeout: Timeout in number of seconds.
}
/**
- * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function.
+ * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
* @phba: Pointer to HBA context.
*
* This function is called to cleanup any pending mailbox
}
/**
- * lpfc_sli_check_eratt: check error attention events
+ * lpfc_sli_check_eratt - check error attention events
* @phba: Pointer to HBA context.
*
* This function is called form timer soft interrupt context to check HBA's
return 0;
}
+ /*
+ * If there is deferred error attention, do not check for error
+ * attention
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return 0;
+ }
+
/* Read chip Host Attention (HA) register */
ha_copy = readl(phba->HAregaddr);
if (ha_copy & HA_ERATT) {
/* Read host status register to retrieve error event */
lpfc_sli_read_hs(phba);
+
+ /* Check if there is a deferred error condition is active */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ phba->hba_flag |= DEFER_ERATT;
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+
/* Set the driver HA work bitmap */
phba->work_ha |= HA_ERATT;
/* Indicate polling handles this ERATT */
}
/**
- * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver.
+ * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
/* Indicate interrupt handler handles ERATT */
phba->hba_flag |= HBA_ERATT_HANDLED;
}
+
+ /*
+ * If there is deferred error attention, do not check for any
+ * interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
+
/* Clear up only attention source related to slow-path */
writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)),
phba->HAregaddr);
}
}
spin_lock_irqsave(&phba->hbalock, iflag);
- if (work_ha_copy & HA_ERATT)
+ if (work_ha_copy & HA_ERATT) {
lpfc_sli_read_hs(phba);
+ /*
+ * Check if there is a deferred error condition
+ * is active
+ */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ phba->hba_flag |= DEFER_ERATT;
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+ }
+
if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
pmbox = &pmb->mb;
} /* lpfc_sp_intr_handler */
/**
- * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver.
+ * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
ha_copy = readl(phba->HAregaddr);
/* Clear up only attention source related to fast-path */
spin_lock_irqsave(&phba->hbalock, iflag);
+ /*
+ * If there is deferred error attention, do not check for
+ * any interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
} /* lpfc_fp_intr_handler */
/**
- * lpfc_intr_handler: The device-level interrupt handler of lpfc driver.
+ * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
phba->hba_flag |= HBA_ERATT_HANDLED;
}
+ /*
+ * If there is deferred error attention, do not check for any interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
+
/* Clear attention sources except link and error attentions */
writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.0"
+#define LPFC_DRIVER_VERSION "8.3.1"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
#define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex. All rights reserved."
+#define LPFC_COPYRIGHT "Copyright(c) 2004-2009 Emulex. All rights reserved."
}
/**
- * lpfc_discovery_wait: Wait for driver discovery to quiesce.
+ * lpfc_discovery_wait - Wait for driver discovery to quiesce
* @vport: The virtual port for which this call is being executed.
*
* This driver calls this routine specifically from lpfc_vport_delete
/**
- * lpfc_vport_reset_stat_data: Reset the statistical data for the vport.
+ * lpfc_vport_reset_stat_data - Reset the statistical data for the vport
* @vport: Pointer to vport object.
*
* This function resets the statistical data for the vport. This function
/**
- * lpfc_alloc_bucket: Allocate data buffer required for collecting
- * statistical data.
+ * lpfc_alloc_bucket - Allocate data buffer required for statistical data
* @vport: Pointer to vport object.
*
* This function allocates data buffer required for all the FC
}
/**
- * lpfc_free_bucket: Free data buffer required for collecting
- * statistical data.
+ * lpfc_free_bucket - Free data buffer required for statistical data
* @vport: Pointer to vport object.
*
* Th function frees statistical data buffer of all the FC
static irqreturn_t
_base_interrupt(int irq, void *bus_id)
{
+ union reply_descriptor {
+ u64 word;
+ struct {
+ u32 low;
+ u32 high;
+ } u;
+ };
+ union reply_descriptor rd;
u32 post_index, post_index_next, completed_cmds;
u8 request_desript_type;
u16 smid;
completed_cmds = 0;
do {
- if (ioc->reply_post_free[post_index].Words == ~0ULL)
+ rd.word = ioc->reply_post_free[post_index].Words;
+ if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
goto out;
reply = 0;
cb_idx = 0xFF;
for (i = 0 ; i < completed_cmds; i++) {
post_index = post_index_next;
/* poison the reply post descriptor */
- ioc->reply_post_free[post_index_next].Words = ~0ULL;
+ ioc->reply_post_free[post_index_next].Words = ULLONG_MAX;
post_index_next = (post_index ==
(ioc->reply_post_queue_depth - 1))
? 0 : post_index + 1;
if (sizeof(dma_addr_t) > 4) {
const uint64_t required_mask =
dma_get_required_mask(&pdev->dev);
- if ((required_mask > DMA_32BIT_MASK) && !pci_set_dma_mask(pdev,
- DMA_64BIT_MASK) && !pci_set_consistent_dma_mask(pdev,
- DMA_64BIT_MASK)) {
+ if ((required_mask > DMA_BIT_MASK(32)) && !pci_set_dma_mask(pdev,
+ DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(64))) {
ioc->base_add_sg_single = &_base_add_sg_single_64;
ioc->sge_size = sizeof(Mpi2SGESimple64_t);
desc = "64";
}
}
- if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK)
- && !pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK)) {
+ if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
+ && !pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32))) {
ioc->base_add_sg_single = &_base_add_sg_single_32;
ioc->sge_size = sizeof(Mpi2SGESimple32_t);
desc = "32";
&ioc->scsi_lookup_lock);
}
+/**
+ * _base_display_dell_branding - Disply branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
+{
+ char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];
+
+ if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
+ return;
+
+ memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ default:
+ sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
+ break;
+ }
+
+ printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
+ " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
+ ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
+ ioc->pdev->subsystem_device);
+}
+
/**
* _base_display_ioc_capabilities - Disply IOC's capabilities.
* @ioc: per adapter object
i++;
}
+ _base_display_dell_branding(ioc);
+
i = 0;
printk("), ");
printk("Capabilities=(");
/* initialize Reply Post Free Queue */
for (i = 0; i < ioc->reply_post_queue_depth; i++)
- ioc->reply_post_free[i].Words = ~0ULL;
+ ioc->reply_post_free[i].Words = ULLONG_MAX;
r = _base_send_ioc_init(ioc, VF_ID, sleep_flag);
if (r)
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "00.100.11.16"
+#define MPT2SAS_DRIVER_VERSION "01.100.02.00"
#define MPT2SAS_MAJOR_VERSION 00
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 11
-#define MPT2SAS_RELEASE_VERSION 16
+#define MPT2SAS_BUILD_VERSION 02
+#define MPT2SAS_RELEASE_VERSION 00
/*
* Set MPT2SAS_SG_DEPTH value based on user input.
#define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT
#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT
+/*
+ * Dell HBA branding
+ */
+#define MPT2SAS_DELL_BRANDING_SIZE 32
+
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
+#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
+#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
+#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
+
+/*
+ * Dell HBA SSDIDs
+ */
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
+#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
+#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
+#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
+
/*
* per target private data
*/
static struct fasync_struct *async_queue;
static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
+static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type,
+ u8 *issue_reset);
+
/**
* enum block_state - blocking state
* @NON_BLOCKING: non blocking
void
mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
{
+ int i;
+ u8 issue_reset;
+
switch (reset_phase) {
case MPT2_IOC_PRE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
+ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+ if (!(ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED))
+ continue;
+ if ((ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_RELEASED))
+ continue;
+ _ctl_send_release(ioc, i, &issue_reset);
+ }
break;
case MPT2_IOC_AFTER_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
+
+ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+ if (!(ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED))
+ continue;
+ if ((ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_RELEASED))
+ continue;
+ ioc->diag_buffer_status[i] |=
+ MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+ }
break;
}
}
if (tm_request->TaskType ==
MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
- if (_ctl_do_task_abort(ioc, &karg, tm_request))
+ if (_ctl_do_task_abort(ioc, &karg, tm_request)) {
+ mpt2sas_base_free_smid(ioc, smid);
goto out;
+ }
}
mutex_lock(&ioc->tm_cmds.mutex);
karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
karg.firmware_version = ioc->facts.FWVersion.Word;
- strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION,
- MPT2_IOCTL_VERSION_LENGTH);
- karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0';
+ strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME);
+ strcat(karg.driver_version, "-");
+ strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
if (copy_to_user(arg, &karg, sizeof(karg))) {
}
/**
- * _ctl_diag_release - request to send Diag Release Message to firmware
- * @arg - user space buffer containing ioctl content
- * @state - NON_BLOCKING or BLOCKING
+ * _ctl_send_release - Diag Release Message
+ * @ioc: per adapter object
+ * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @issue_reset - specifies whether host reset is required.
*
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
*/
-static long
-_ctl_diag_release(void __user *arg, enum block_state state)
+static int
+_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
{
- struct mpt2_diag_release karg;
- struct MPT2SAS_ADAPTER *ioc;
- void *request_data;
- int rc;
Mpi2DiagReleaseRequest_t *mpi_request;
Mpi2DiagReleaseReply_t *mpi_reply;
- u8 buffer_type;
- unsigned long timeleft;
u16 smid;
u16 ioc_status;
- u8 issue_reset = 0;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
- if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
- return -ENODEV;
+ u32 ioc_state;
+ int rc;
+ unsigned long timeleft;
dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
- buffer_type = karg.unique_id & 0x000000ff;
- if (!_ctl_diag_capability(ioc, buffer_type)) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -EPERM;
- }
-
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
- "registered\n", ioc->name, __func__, buffer_type);
- return -EINVAL;
- }
-
- if (karg.unique_id != ioc->unique_id[buffer_type]) {
- printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
- "registered\n", ioc->name, __func__, karg.unique_id);
- return -EINVAL;
- }
-
- if (ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_RELEASED) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
- "is already released\n", ioc->name, __func__,
- buffer_type);
- return 0;
- }
-
- request_data = ioc->diag_buffer[buffer_type];
+ rc = 0;
+ *issue_reset = 0;
- if (!request_data) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -ENOMEM;
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "skipping due to FAULT state\n", ioc->name,
+ __func__));
+ rc = -EAGAIN;
+ goto out;
}
- if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
- return -EAGAIN;
- else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
- return -ERESTARTSYS;
-
if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
ioc->name, __func__);
goto out;
}
- rc = 0;
ioc->ctl_cmds.status = MPT2_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
_debug_dump_mf(mpi_request,
sizeof(Mpi2DiagReleaseRequest_t)/4);
if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
+ *issue_reset = 1;
+ rc = -EFAULT;
+ goto out;
}
/* process the completed Reply Message Frame */
rc = -EFAULT;
}
- issue_host_reset:
+ out:
+ ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+ return rc;
+}
+
+/**
+ * _ctl_diag_release - request to send Diag Release Message to firmware
+ * @arg - user space buffer containing ioctl content
+ * @state - NON_BLOCKING or BLOCKING
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+static long
+_ctl_diag_release(void __user *arg, enum block_state state)
+{
+ struct mpt2_diag_release karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ void *request_data;
+ int rc;
+ u8 buffer_type;
+ u8 issue_reset = 0;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ buffer_type = karg.unique_id & 0x000000ff;
+ if (!_ctl_diag_capability(ioc, buffer_type)) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -EPERM;
+ }
+
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
+ "registered\n", ioc->name, __func__, buffer_type);
+ return -EINVAL;
+ }
+
+ if (karg.unique_id != ioc->unique_id[buffer_type]) {
+ printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
+ "registered\n", ioc->name, __func__, karg.unique_id);
+ return -EINVAL;
+ }
+
+ if (ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_RELEASED) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+ "is already released\n", ioc->name, __func__,
+ buffer_type);
+ return 0;
+ }
+
+ request_data = ioc->diag_buffer[buffer_type];
+
+ if (!request_data) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -ENOMEM;
+ }
+
+ /* buffers were released by due to host reset */
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_DIAG_RESET)) {
+ ioc->diag_buffer_status[buffer_type] |=
+ MPT2_DIAG_BUFFER_IS_RELEASED;
+ ioc->diag_buffer_status[buffer_type] &=
+ ~MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+ "was released due to host reset\n", ioc->name, __func__,
+ buffer_type);
+ return 0;
+ }
+
+ if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+ return -EAGAIN;
+ else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+ return -ERESTARTSYS;
+
+ rc = _ctl_send_release(ioc, buffer_type, &issue_reset);
+
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
- out:
-
- ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
mutex_unlock(&ioc->ctl_cmds.mutex);
return rc;
}
#endif
#define MPT2SAS_DEV_NAME "mpt2ctl"
-#define MPT2_MAGIC_NUMBER 'm'
+#define MPT2_MAGIC_NUMBER 'L'
#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
/**
/* status bits for ioc->diag_buffer_status */
-#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
-#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
+#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
+#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
+#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04)
/* application flags for mpt2_diag_register, mpt2_diag_query */
#define MPT2_APP_FLAGS_APP_OWNED (0x0001)
*/
struct fw_event_work {
struct list_head list;
- struct delayed_work work;
+ struct work_struct work;
struct MPT2SAS_ADAPTER *ioc;
u8 VF_ID;
u8 host_reset_handling;
handle = sas_device->handle;
parent_handle = sas_device->parent_handle;
sas_address = sas_device->sas_address;
- if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+ if (!mpt2sas_transport_port_add(ioc, handle, parent_handle))
_scsih_sas_device_remove(ioc, sas_device);
- } else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc, sas_address, parent_handle);
- _scsih_sas_device_remove(ioc, sas_device);
- }
}
/**
rphy = dev_to_rphy(starget->dev.parent);
sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
rphy->identify.sas_address);
- if (sas_device)
+ if (sas_device && (sas_device->starget == starget) &&
+ (sas_device->id == starget->id) &&
+ (sas_device->channel == starget->channel))
sas_device->starget = NULL;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
spin_lock_irqsave(&ioc->fw_event_lock, flags);
list_add_tail(&fw_event->list, &ioc->fw_event_list);
- INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work);
- queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1);
+ INIT_WORK(&fw_event->work, _firmware_event_work);
+ queue_work(ioc->firmware_event_thread, &fw_event->work);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
return;
spin_lock_irqsave(&ioc->fw_event_lock, flags);
- queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay);
+ queue_work(ioc->firmware_event_thread, &fw_event->work);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
struct sense_info data;
const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
smid);
- memcpy(scmd->sense_buffer, sense_data,
+ u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
le32_to_cpu(mpi_reply->SenseCount));
+ memcpy(scmd->sense_buffer, sense_data, sz);
_scsih_normalize_sense(scmd->sense_buffer, &data);
/* failure prediction threshold exceeded */
if (data.asc == 0x5D)
mpt2sas_scsih_issue_tm(ioc, handle, lun,
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
- termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) &&
(mpi_reply->ResponseCode ==
continue;
mpt2sas_scsih_issue_tm(ioc, handle, lun,
- MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30);
+ MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
termination_count += le32_to_cpu(mpi_reply->TerminationCount);
}
- ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
ioc->broadcast_aen_busy = 0;
mutex_unlock(&ioc->tm_cmds.mutex);
_firmware_event_work(struct work_struct *work)
{
struct fw_event_work *fw_event = container_of(work,
- struct fw_event_work, work.work);
+ struct fw_event_work, work);
unsigned long flags;
struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
osdv2_attr_list_elem_size(len);
}
+static void _osd_req_alist_elem_encode(struct osd_request *or,
+ void *attr_last, const struct osd_attr *oa)
+{
+ if (osd_req_is_ver1(or)) {
+ struct osdv1_attributes_list_element *attr = attr_last;
+
+ attr->attr_page = cpu_to_be32(oa->attr_page);
+ attr->attr_id = cpu_to_be32(oa->attr_id);
+ attr->attr_bytes = cpu_to_be16(oa->len);
+ memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ } else {
+ struct osdv2_attributes_list_element *attr = attr_last;
+
+ attr->attr_page = cpu_to_be32(oa->attr_page);
+ attr->attr_id = cpu_to_be32(oa->attr_id);
+ attr->attr_bytes = cpu_to_be16(oa->len);
+ memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ }
+}
+
+static int _osd_req_alist_elem_decode(struct osd_request *or,
+ void *cur_p, struct osd_attr *oa, unsigned max_bytes)
+{
+ unsigned inc;
+ if (osd_req_is_ver1(or)) {
+ struct osdv1_attributes_list_element *attr = cur_p;
+
+ if (max_bytes < sizeof(*attr))
+ return -1;
+
+ oa->len = be16_to_cpu(attr->attr_bytes);
+ inc = _osd_req_alist_elem_size(or, oa->len);
+ if (inc > max_bytes)
+ return -1;
+
+ oa->attr_page = be32_to_cpu(attr->attr_page);
+ oa->attr_id = be32_to_cpu(attr->attr_id);
+
+ /* OSD1: On empty attributes we return a pointer to 2 bytes
+ * of zeros. This keeps similar behaviour with OSD2.
+ * (See below)
+ */
+ oa->val_ptr = likely(oa->len) ? attr->attr_val :
+ (u8 *)&attr->attr_bytes;
+ } else {
+ struct osdv2_attributes_list_element *attr = cur_p;
+
+ if (max_bytes < sizeof(*attr))
+ return -1;
+
+ oa->len = be16_to_cpu(attr->attr_bytes);
+ inc = _osd_req_alist_elem_size(or, oa->len);
+ if (inc > max_bytes)
+ return -1;
+
+ oa->attr_page = be32_to_cpu(attr->attr_page);
+ oa->attr_id = be32_to_cpu(attr->attr_id);
+
+ /* OSD2: For convenience, on empty attributes, we return 8 bytes
+ * of zeros here. This keeps the same behaviour with OSD2r04,
+ * and is nice with null terminating ASCII fields.
+ * oa->val_ptr == NULL marks the end-of-list, or error.
+ */
+ oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved;
+ }
+ return inc;
+}
+
static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head)
{
return osd_req_is_ver1(or) ?
struct osd_cdb *ocdb = &or->cdb;
if (osd_req_is_ver1(or))
- return &ocdb->v1.sec_params;
+ return (struct osd_security_parameters *)&ocdb->v1.sec_params;
else
- return &ocdb->v2.sec_params;
+ return (struct osd_security_parameters *)&ocdb->v2.sec_params;
}
void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device)
WARN_ON(or->in.bio);
bio = bio_map_kern(q, list, len, or->alloc_flags);
- if (!bio) {
+ if (IS_ERR(bio)) {
OSD_ERR("!!! Failed to allocate list_objects BIO\n");
- return -ENOMEM;
+ return PTR_ERR(bio);
}
bio->bi_rw &= ~(1 << BIO_RW);
attr_last = or->set_attr.buff + total_bytes;
for (; nelem; --nelem) {
- struct osd_attributes_list_element *attr;
unsigned elem_size = _osd_req_alist_elem_size(or, oa->len);
total_bytes += elem_size;
or->set_attr.buff + or->set_attr.total_bytes;
}
- attr = attr_last;
- attr->attr_page = cpu_to_be32(oa->attr_page);
- attr->attr_id = cpu_to_be32(oa->attr_id);
- attr->attr_bytes = cpu_to_be16(oa->len);
- memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ _osd_req_alist_elem_encode(or, attr_last, oa);
attr_last += elem_size;
++oa;
}
for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) {
- struct osd_attributes_list_element *attr = cur_p;
- unsigned inc;
+ int inc = _osd_req_alist_elem_decode(or, cur_p, oa,
+ returned_bytes - cur_bytes);
- oa->len = be16_to_cpu(attr->attr_bytes);
- inc = _osd_req_alist_elem_size(or, oa->len);
- OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n",
- oa->len, inc, cur_bytes);
- cur_bytes += inc;
- if (cur_bytes > returned_bytes) {
+ if (inc < 0) {
OSD_ERR("BAD FOOD from target. list not valid!"
"c=%d r=%d n=%d\n",
cur_bytes, returned_bytes, n);
break;
}
- oa->attr_page = be32_to_cpu(attr->attr_page);
- oa->attr_id = be32_to_cpu(attr->attr_id);
- oa->val_ptr = attr->attr_val;
-
+ cur_bytes += inc;
cur_p += inc;
++oa;
}
return ret;
}
+static inline void osd_sec_parms_set_out_offset(bool is_v1,
+ struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+ if (is_v1)
+ sec_parms->v1.data_out_integrity_check_offset = offset;
+ else
+ sec_parms->v2.data_out_integrity_check_offset = offset;
+}
+
+static inline void osd_sec_parms_set_in_offset(bool is_v1,
+ struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+ if (is_v1)
+ sec_parms->v1.data_in_integrity_check_offset = offset;
+ else
+ sec_parms->v2.data_in_integrity_check_offset = offset;
+}
+
static int _osd_req_finalize_data_integrity(struct osd_request *or,
bool has_in, bool has_out, const u8 *cap_key)
{
or->out_data_integ.get_attributes_bytes = cpu_to_be64(
or->enc_get_attr.total_bytes);
- sec_parms->data_out_integrity_check_offset =
- osd_req_encode_offset(or, or->out.total_bytes, &pad);
+ osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms,
+ osd_req_encode_offset(or, or->out.total_bytes, &pad));
ret = _req_append_segment(or, pad, &seg, or->out.last_seg,
&or->out);
};
unsigned pad;
- sec_parms->data_in_integrity_check_offset =
- osd_req_encode_offset(or, or->in.total_bytes, &pad);
+ osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms,
+ osd_req_encode_offset(or, or->in.total_bytes, &pad));
ret = _req_append_segment(or, pad, &seg, or->in.last_seg,
&or->in);
.unlocked_ioctl = osd_uld_ioctl,
};
-struct osd_dev *osduld_path_lookup(const char *path)
+struct osd_dev *osduld_path_lookup(const char *name)
{
- struct nameidata nd;
+ struct path path;
struct inode *inode;
struct cdev *cdev;
struct osd_uld_device *uninitialized_var(oud);
int error;
- if (!path || !*path) {
+ if (!name || !*name) {
OSD_ERR("Mount with !path || !*path\n");
return ERR_PTR(-EINVAL);
}
- error = path_lookup(path, LOOKUP_FOLLOW, &nd);
+ error = kern_path(name, LOOKUP_FOLLOW, &path);
if (error) {
- OSD_ERR("path_lookup of %s faild=>%d\n", path, error);
+ OSD_ERR("path_lookup of %s failed=>%d\n", name, error);
return ERR_PTR(error);
}
- inode = nd.path.dentry->d_inode;
+ inode = path.dentry->d_inode;
error = -EINVAL; /* Not the right device e.g osd_uld_device */
if (!S_ISCHR(inode->i_mode)) {
OSD_DEBUG("!S_ISCHR()\n");
cdev = inode->i_cdev;
if (!cdev) {
OSD_ERR("Before mounting an OSD Based filesystem\n");
- OSD_ERR(" user-mode must open+close the %s device\n", path);
- OSD_ERR(" Example: bash: echo < %s\n", path);
+ OSD_ERR(" user-mode must open+close the %s device\n", name);
+ OSD_ERR(" Example: bash: echo < %s\n", name);
goto out;
}
/* The Magic wand. Is it our char-dev */
/* TODO: Support sg devices */
if (cdev->owner != THIS_MODULE) {
- OSD_ERR("Error mounting %s - is not an OSD device\n", path);
+ OSD_ERR("Error mounting %s - is not an OSD device\n", name);
goto out;
}
error = 0;
out:
- path_put(&nd.path);
+ path_put(&path);
return error ? ERR_PTR(error) : &oud->od;
}
EXPORT_SYMBOL(osduld_path_lookup);
if (--starget->target_blocked == 0) {
SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
"unblocking target at zero depth\n"));
- } else {
- blk_plug_device(sdev->request_queue);
+ } else
return 0;
- }
}
if (scsi_target_is_busy(starget)) {
spin_unlock(&async_scan_lock);
kfree(data);
- /* Synchronize async operations globally */
- async_synchronize_full();
return 0;
}
*/
#include <linux/module.h>
+#include <linux/device.h>
#include <scsi/scsi_scan.h>
static int __init wait_scan_init(void)
{
+ /*
+ * First we need to wait for device probing to finish;
+ * the drivers we just loaded might just still be probing
+ * and might not yet have reached the scsi async scanning
+ */
+ wait_for_device_probe();
+ /*
+ * and then we wait for the actual asynchronous scsi scan
+ * to finish.
+ */
scsi_complete_async_scans();
return 0;
}
#include <linux/string_helpers.h>
#include <linux/async.h>
#include <asm/uaccess.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
return -EINVAL;
}
- sector_size = (buffer[8] << 24) | (buffer[9] << 16) |
- (buffer[10] << 8) | buffer[11];
- lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) |
- ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) |
- ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) |
- ((u64)buffer[6] << 8) | (u64)buffer[7]);
+ sector_size = get_unaligned_be32(&buffer[8]);
+ lba = get_unaligned_be64(&buffer[0]);
sd_read_protection_type(sdkp, buffer);
return -EINVAL;
}
- sector_size = (buffer[4] << 24) | (buffer[5] << 16) |
- (buffer[6] << 8) | buffer[7];
- lba = (buffer[0] << 24) | (buffer[1] << 16) |
- (buffer[2] << 8) | buffer[3];
+ sector_size = get_unaligned_be32(&buffer[4]);
+ lba = get_unaligned_be32(&buffer[0]);
if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
/* tasklet or soft irq callback */
static void sg_rq_end_io(struct request *rq, int uptodate);
static int sg_start_req(Sg_request *srp, unsigned char *cmd);
-static void sg_finish_rem_req(Sg_request * srp);
+static int sg_finish_rem_req(Sg_request * srp);
static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size);
static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count,
Sg_request * srp);
goto err_out;
}
err_out:
- sg_finish_rem_req(srp);
+ err = sg_finish_rem_req(srp);
return (0 == err) ? count : err;
}
return res;
}
-static void
-sg_finish_rem_req(Sg_request * srp)
+static int sg_finish_rem_req(Sg_request * srp)
{
+ int ret = 0;
+
Sg_fd *sfp = srp->parentfp;
Sg_scatter_hold *req_schp = &srp->data;
if (srp->rq) {
if (srp->bio)
- blk_rq_unmap_user(srp->bio);
+ ret = blk_rq_unmap_user(srp->bio);
blk_put_request(srp->rq);
}
sg_remove_request(sfp, srp);
+
+ return ret;
}
static int
if (0 == sr_test_unit_ready(cd->device, &sshdr))
return CDS_DISC_OK;
+ /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */
+ if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY
+ && sshdr.asc == 0x04 && sshdr.ascq == 0x01)
+ return CDS_DRIVE_NOT_READY;
+
if (!cdrom_get_media_event(cdi, &med)) {
if (med.media_present)
return CDS_DISC_OK;
}
/*
- * ITE support by Niels de Vos <niels.devos@wincor-nixdorf.com>
- *
* These chips are available with optionally one parallel port and up to
* two serial ports. Unfortunately they all have the same product id.
*
struct tty_struct *tty = uart->port.info->port.tty;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+ if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
uart->scts = 0;
uart_handle_cts_change(&uart->port, uart->scts);
}
struct bfin_serial_port *uart = dev_id;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+ if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) {
uart->scts = 0;
uart_handle_cts_change(&uart->port, uart->scts);
}
struct circ_buf *xmit = &uart->port.info->xmit;
#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS
- if (uart->scts && (!bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
+ if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) {
uart->scts = 0;
uart_handle_cts_change(&uart->port, uart->scts);
}
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/bitops.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/system.h>
-#include <linux/delay.h>
#include <arch/svinto.h>
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-static struct ktermios *serial_termios[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
return 0;
}
+#ifdef CONFIG_PROC_FS
/*
* /proc fs routines....
*/
-static int line_info(char *buf, struct e100_serial *info)
+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
{
- char stat_buf[30];
- int ret;
unsigned long tmp;
- ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
- info->line, (unsigned long)info->ioport, info->irq);
+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
+ info->line, (unsigned long)info->ioport, info->irq);
if (!info->ioport || (info->type == PORT_UNKNOWN)) {
- ret += sprintf(buf+ret, "\n");
- return ret;
+ seq_printf(m, "\n");
+ return;
}
- stat_buf[0] = 0;
- stat_buf[1] = 0;
- if (!E100_RTS_GET(info))
- strcat(stat_buf, "|RTS");
- if (!E100_CTS_GET(info))
- strcat(stat_buf, "|CTS");
- if (!E100_DTR_GET(info))
- strcat(stat_buf, "|DTR");
- if (!E100_DSR_GET(info))
- strcat(stat_buf, "|DSR");
- if (!E100_CD_GET(info))
- strcat(stat_buf, "|CD");
- if (!E100_RI_GET(info))
- strcat(stat_buf, "|RI");
-
- ret += sprintf(buf+ret, " baud:%d", info->baud);
-
- ret += sprintf(buf+ret, " tx:%lu rx:%lu",
+ seq_printf(m, " baud:%d", info->baud);
+ seq_printf(m, " tx:%lu rx:%lu",
(unsigned long)info->icount.tx,
(unsigned long)info->icount.rx);
tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
- if (tmp) {
- ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
- (unsigned long)tmp,
- (unsigned long)SERIAL_XMIT_SIZE);
- }
+ if (tmp)
+ seq_printf(m, " tx_pend:%lu/%lu",
+ (unsigned long)tmp,
+ (unsigned long)SERIAL_XMIT_SIZE);
- ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
- (unsigned long)info->recv_cnt,
- (unsigned long)info->max_recv_cnt);
+ seq_printf(m, " rx_pend:%lu/%lu",
+ (unsigned long)info->recv_cnt,
+ (unsigned long)info->max_recv_cnt);
#if 1
if (info->port.tty) {
-
if (info->port.tty->stopped)
- ret += sprintf(buf+ret, " stopped:%i",
- (int)info->port.tty->stopped);
+ seq_printf(m, " stopped:%i",
+ (int)info->port.tty->stopped);
if (info->port.tty->hw_stopped)
- ret += sprintf(buf+ret, " hw_stopped:%i",
- (int)info->port.tty->hw_stopped);
+ seq_printf(m, " hw_stopped:%i",
+ (int)info->port.tty->hw_stopped);
}
{
unsigned char rstat = info->ioport[REG_STATUS];
- if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
- ret += sprintf(buf+ret, " xoff_detect:1");
+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
+ seq_printf(m, " xoff_detect:1");
}
#endif
-
-
-
if (info->icount.frame)
- ret += sprintf(buf+ret, " fe:%lu",
- (unsigned long)info->icount.frame);
+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
if (info->icount.parity)
- ret += sprintf(buf+ret, " pe:%lu",
- (unsigned long)info->icount.parity);
+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
if (info->icount.brk)
- ret += sprintf(buf+ret, " brk:%lu",
- (unsigned long)info->icount.brk);
+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
if (info->icount.overrun)
- ret += sprintf(buf+ret, " oe:%lu",
- (unsigned long)info->icount.overrun);
+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
- return ret;
+ if (!E100_RTS_GET(info))
+ seq_puts(m, "|RTS");
+ if (!E100_CTS_GET(info))
+ seq_puts(m, "|CTS");
+ if (!E100_DTR_GET(info))
+ seq_puts(m, "|DTR");
+ if (!E100_DSR_GET(info))
+ seq_puts(m, "|DSR");
+ if (!E100_CD_GET(info))
+ seq_puts(m, "|CD");
+ if (!E100_RI_GET(info))
+ seq_puts(m, "|RI");
+ seq_puts(m, "\n");
}
-int rs_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+
+static int crisv10_proc_show(struct seq_file *m, void *v)
{
- int i, len = 0, l;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver:%s\n",
- serial_version);
- for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+
+ for (i = 0; i < NR_PORTS; i++) {
if (!rs_table[i].enabled)
continue;
- l = line_info(page + len, &rs_table[i]);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_line_info(m, &rs_table[i]);
}
#ifdef DEBUG_LOG_INCLUDED
for (i = 0; i < debug_log_pos; i++) {
- len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
- len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_printf(m, "%-4i %lu.%lu ",
+ i, debug_log[i].time,
+ timer_data_to_ns(debug_log[i].timer_data));
+ seq_printf(m, debug_log[i].string, debug_log[i].value);
}
- len += sprintf(page + len, "debug_log %i/%i %li bytes\n",
- i, DEBUG_LOG_SIZE, begin+len);
+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
debug_log_pos = 0;
#endif
+ return 0;
+}
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+static int crisv10_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, crisv10_proc_show, NULL);
}
+static const struct file_operations crisv10_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = crisv10_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif
+
+
/* Finally, routines used to initialize the serial driver. */
-static void
-show_serial_version(void)
+static void show_serial_version(void)
{
printk(KERN_INFO
- "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
+ "ETRAX 100LX serial-driver %s, "
+ "(c) 2000-2004 Axis Communications AB\r\n",
&serial_version[11]); /* "$Revision: x.yy" */
}
.break_ctl = rs_break,
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
.tiocmget = rs_tiocmget,
- .tiocmset = rs_tiocmset
+ .tiocmset = rs_tiocmset,
+#ifdef CONFIG_PROC_FS
+ .proc_fops = &crisv10_proc_fops,
+#endif
};
-static int __init
-rs_init(void)
+static int __init rs_init(void)
{
int i;
struct e100_serial *info;
struct pci_dev *pci_dev;
u32 maxports; /* MAX ports this board can handle */
- spinlock_t bd_lock; /* Used to protect board */
-
spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and
* the interrupt routine from each other.
*/
else
brd->maxports = 2;
- spin_lock_init(&brd->bd_lock);
spin_lock_init(&brd->bd_intr_lock);
/* store which revision we have */
ch = dcr_read(up->dcr_host, UART_RX);
if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
tty_insert_flip_char(tty, ch, TTY_NORMAL);
- } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
+ } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
tty_flip_buffer_push(tty);
ret = IRQ_HANDLED;
+ /* clear interrupt */
+ dcr_write(up->dcr_host, UART_IIR, 1);
out:
spin_unlock(&up->port.lock);
return ret;
.name = "Samsung S3C6400 UART",
.type = PORT_S3C6400,
.fifosize = 64,
+ .has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2440_UFSTAT_RXFULL,
struct s3c24xx_uart_port *ourport = to_ourport(port);
if (tx_enabled(port)) {
- disable_irq(ourport->tx_irq);
+ disable_irq_nosync(ourport->tx_irq);
tx_enabled(port) = 0;
if (port->flags & UPF_CONS_FLOW)
s3c24xx_serial_rx_enable(port);
if (rx_enabled(port)) {
dbg("s3c24xx_serial_stop_rx: port=%p\n", port);
- disable_irq(ourport->rx_irq);
+ disable_irq_nosync(ourport->rx_irq);
rx_enabled(port) = 0;
}
}
struct baud_calc {
struct s3c24xx_uart_clksrc *clksrc;
unsigned int calc;
+ unsigned int divslot;
unsigned int quot;
struct clk *src;
};
struct s3c24xx_uart_clksrc *clksrc,
unsigned int baud)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned long rate;
calc->src = clk_get(port->dev, clksrc->name);
rate /= clksrc->divisor;
calc->clksrc = clksrc;
- calc->quot = (rate + (8 * baud)) / (16 * baud);
- calc->calc = (rate / (calc->quot * 16));
+
+ if (ourport->info->has_divslot) {
+ unsigned long div = rate / baud;
+
+ /* The UDIVSLOT register on the newer UARTs allows us to
+ * get a divisor adjustment of 1/16th on the baud clock.
+ *
+ * We don't keep the UDIVSLOT value (the 16ths we calculated
+ * by not multiplying the baud by 16) as it is easy enough
+ * to recalculate.
+ */
+
+ calc->quot = div / 16;
+ calc->calc = rate / div;
+ } else {
+ calc->quot = (rate + (8 * baud)) / (16 * baud);
+ calc->calc = (rate / (calc->quot * 16));
+ }
calc->quot--;
return 1;
return best->quot;
}
+/* udivslot_table[]
+ *
+ * This table takes the fractional value of the baud divisor and gives
+ * the recommended setting for the UDIVSLOT register.
+ */
+static u16 udivslot_table[16] = {
+ [0] = 0x0000,
+ [1] = 0x0080,
+ [2] = 0x0808,
+ [3] = 0x0888,
+ [4] = 0x2222,
+ [5] = 0x4924,
+ [6] = 0x4A52,
+ [7] = 0x54AA,
+ [8] = 0x5555,
+ [9] = 0xD555,
+ [10] = 0xD5D5,
+ [11] = 0xDDD5,
+ [12] = 0xDDDD,
+ [13] = 0xDFDD,
+ [14] = 0xDFDF,
+ [15] = 0xFFDF,
+};
+
static void s3c24xx_serial_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
unsigned int baud, quot;
unsigned int ulcon;
unsigned int umcon;
+ unsigned int udivslot = 0;
/*
* We don't support modem control lines.
/* check to see if we need to change clock source */
if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+ dbg("selecting clock %p\n", clk);
s3c24xx_serial_setsource(port, clksrc);
if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
+ if (ourport->info->has_divslot) {
+ unsigned int div = ourport->baudclk_rate / baud;
+
+ udivslot = udivslot_table[div & 15];
+ dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ }
+
switch (termios->c_cflag & CSIZE) {
case CS5:
dbg("config: 5bits/char\n");
spin_lock_irqsave(&port->lock, flags);
- dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+ dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+ ulcon, quot, udivslot);
wr_regl(port, S3C2410_ULCON, ulcon);
wr_regl(port, S3C2410_UBRDIV, quot);
wr_regl(port, S3C2410_UMCON, umcon);
+ if (ourport->info->has_divslot)
+ wr_regl(port, S3C2443_DIVSLOT, udivslot);
+
dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
rd_regl(port, S3C2410_ULCON),
rd_regl(port, S3C2410_UCON),
unsigned long tx_fifoshift;
unsigned long tx_fifofull;
+ /* uart port features */
+
+ unsigned int has_divslot:1;
+
/* clock source control */
int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
struct intc_desc_int {
struct list_head list;
struct sys_device sysdev;
+ pm_message_t state;
unsigned long *reg;
#ifdef CONFIG_SMP
unsigned long *smp;
/* get intc controller associated with this sysdev */
d = container_of(dev, struct intc_desc_int, sysdev);
- /* enable wakeup irqs belonging to this intc controller */
- for_each_irq_desc(irq, desc) {
- if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip))
- intc_enable(irq);
+ switch (state.event) {
+ case PM_EVENT_ON:
+ if (d->state.event != PM_EVENT_FREEZE)
+ break;
+ for_each_irq_desc(irq, desc) {
+ if (desc->chip != &d->chip)
+ continue;
+ if (desc->status & IRQ_DISABLED)
+ intc_disable(irq);
+ else
+ intc_enable(irq);
+ }
+ break;
+ case PM_EVENT_FREEZE:
+ /* nothing has to be done */
+ break;
+ case PM_EVENT_SUSPEND:
+ /* enable wakeup irqs belonging to this intc controller */
+ for_each_irq_desc(irq, desc) {
+ if ((desc->status & IRQ_WAKEUP) && (desc->chip == &d->chip))
+ intc_enable(irq);
+ }
+ break;
}
+ d->state = state;
return 0;
}
+static int intc_resume(struct sys_device *dev)
+{
+ return intc_suspend(dev, PMSG_ON);
+}
+
static struct sysdev_class intc_sysdev_class = {
.name = "intc",
.suspend = intc_suspend,
+ .resume = intc_resume,
};
/* register this intc as sysdev to allow suspend/resume */
struct chip_data *chip = drv_data->cur_chip;
if (chip->cs_control) {
- chip->cs_control(PXA2XX_CS_ASSERT);
+ chip->cs_control(PXA2XX_CS_DEASSERT);
return;
}
while (read_SSSR(reg) & SSSR_RNE) {
read_SSDR(reg);
}
- } while ((read_SSSR(reg) & SSSR_BSY) && limit--);
+ } while ((read_SSSR(reg) & SSSR_BSY) && --limit);
write_SSSR(SSSR_ROR, reg);
return limit;
{
unsigned long limit = loops_per_jiffy << 1;
- while ((read_SSSR(ioaddr) & SSSR_BSY) && limit--)
+ while ((read_SSSR(ioaddr) & SSSR_BSY) && --limit)
cpu_relax();
return limit;
{
unsigned long limit = loops_per_jiffy << 1;
- while (!(DCSR(channel) & DCSR_STOPSTATE) && limit--)
+ while (!(DCSR(channel) & DCSR_STOPSTATE) && --limit)
cpu_relax();
return limit;
{
struct chip_data *chip = spi_get_ctldata(spi);
+ if (!chip)
+ return;
+
if (gpio_is_valid(chip->gpio_cs))
gpio_free(chip->gpio_cs);
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
+ if (drv_data->rx_channel != -1)
+ DRCMR(drv_data->ssp->drcmr_rx) =
+ DRCMR_MAPVLD | drv_data->rx_channel;
+ if (drv_data->tx_channel != -1)
+ DRCMR(drv_data->ssp->drcmr_tx) =
+ DRCMR_MAPVLD | drv_data->tx_channel;
+
/* Enable the SSP clock */
clk_enable(ssp->clk);
int status;
struct spi_message message;
- struct spi_transfer x;
+ struct spi_transfer x[2];
u8 *local_buf;
/* Use preallocated DMA-safe buffer. We can't avoid copying here,
return -EINVAL;
spi_message_init(&message);
- memset(&x, 0, sizeof x);
- x.len = n_tx + n_rx;
- spi_message_add_tail(&x, &message);
+ memset(x, 0, sizeof x);
+ if (n_tx) {
+ x[0].len = n_tx;
+ spi_message_add_tail(&x[0], &message);
+ }
+ if (n_rx) {
+ x[1].len = n_rx;
+ spi_message_add_tail(&x[1], &message);
+ }
/* ... unless someone else is using the pre-allocated buffer */
if (!mutex_trylock(&lock)) {
local_buf = buf;
memcpy(local_buf, txbuf, n_tx);
- x.tx_buf = local_buf;
- x.rx_buf = local_buf;
+ x[0].tx_buf = local_buf;
+ x[1].rx_buf = local_buf + n_tx;
/* do the i/o */
status = spi_sync(spi, &message);
if (status == 0)
- memcpy(rxbuf, x.rx_buf + n_tx, n_rx);
+ memcpy(rxbuf, x[1].rx_buf, n_rx);
- if (x.tx_buf == buf)
+ if (x[0].tx_buf == buf)
mutex_unlock(&lock);
else
kfree(local_buf);
static struct proc_dir_entry *binder_proc_dir_entry_root;
static struct proc_dir_entry *binder_proc_dir_entry_proc;
static struct hlist_head binder_dead_nodes;
+static HLIST_HEAD(binder_deferred_list);
+static DEFINE_MUTEX(binder_deferred_lock);
static int binder_read_proc_proc(
char *page, char **start, off_t off, int count, int *eof, void *data);
#define SZ_4M 0x400000
#endif
-#ifndef __i386__
-#define FORBIDDEN_MMAP_FLAGS (VM_WRITE | VM_EXEC)
-#else
#define FORBIDDEN_MMAP_FLAGS (VM_WRITE)
-#endif
#define BINDER_SMALL_BUF_SIZE (PAGE_SIZE * 64)
uint8_t data[0];
};
+enum {
+ BINDER_DEFERRED_PUT_FILES = 0x01,
+ BINDER_DEFERRED_FLUSH = 0x02,
+ BINDER_DEFERRED_RELEASE = 0x04,
+};
+
struct binder_proc {
struct hlist_node proc_node;
struct rb_root threads;
int pid;
struct vm_area_struct *vma;
struct task_struct *tsk;
+ struct files_struct *files;
+ struct hlist_node deferred_work_node;
+ int deferred_work;
void *buffer;
- size_t user_buffer_offset;
+ ptrdiff_t user_buffer_offset;
struct list_head buffers;
struct rb_root free_buffers;
uid_t sender_euid;
};
+static void binder_defer_work(struct binder_proc *proc, int defer);
+
/*
* copied from get_unused_fd_flags
*/
-int task_get_unused_fd_flags(struct task_struct *tsk, int flags)
+int task_get_unused_fd_flags(struct binder_proc *proc, int flags)
{
- struct files_struct *files = get_files_struct(tsk);
+ struct files_struct *files = proc->files;
int fd, error;
struct fdtable *fdt;
unsigned long rlim_cur;
* will limit the total number of files that can be opened.
*/
rlim_cur = 0;
- if (lock_task_sighand(tsk, &irqs)) {
- rlim_cur = tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
- unlock_task_sighand(tsk, &irqs);
+ if (lock_task_sighand(proc->tsk, &irqs)) {
+ rlim_cur = proc->tsk->signal->rlim[RLIMIT_NOFILE].rlim_cur;
+ unlock_task_sighand(proc->tsk, &irqs);
}
if (fd >= rlim_cur)
goto out;
out:
spin_unlock(&files->file_lock);
- put_files_struct(files);
return error;
}
* copied from fd_install
*/
static void task_fd_install(
- struct task_struct *tsk, unsigned int fd, struct file *file)
+ struct binder_proc *proc, unsigned int fd, struct file *file)
{
- struct files_struct *files = get_files_struct(tsk);
+ struct files_struct *files = proc->files;
struct fdtable *fdt;
if (files == NULL)
BUG_ON(fdt->fd[fd] != NULL);
rcu_assign_pointer(fdt->fd[fd], file);
spin_unlock(&files->file_lock);
- put_files_struct(files);
}
/*
/*
* copied from sys_close
*/
-static long task_close_fd(struct task_struct *tsk, unsigned int fd)
+static long task_close_fd(struct binder_proc *proc, unsigned int fd)
{
struct file *filp;
- struct files_struct *files = get_files_struct(tsk);
+ struct files_struct *files = proc->files;
struct fdtable *fdt;
int retval;
retval == -ERESTART_RESTARTBLOCK))
retval = -EINTR;
- put_files_struct(files);
return retval;
out_unlock:
spin_unlock(&files->file_lock);
- put_files_struct(files);
return -EBADF;
}
proc->pid, page_addr);
goto err_map_kernel_failed;
}
- user_page_addr = (size_t)page_addr + proc->user_buffer_offset;
+ user_page_addr =
+ (uintptr_t)page_addr + proc->user_buffer_offset;
ret = vm_insert_page(vma, user_page_addr, page[0]);
if (ret) {
printk(KERN_ERR "binder: %d: binder_alloc_buf failed "
page_addr -= PAGE_SIZE) {
page = &proc->pages[(page_addr - proc->buffer) / PAGE_SIZE];
if (vma)
- zap_page_range(vma, (size_t)page_addr +
+ zap_page_range(vma, (uintptr_t)page_addr +
proc->user_buffer_offset, PAGE_SIZE, NULL);
err_vm_insert_page_failed:
unmap_kernel_range((unsigned long)page_addr, PAGE_SIZE);
"er %p size %zd\n", proc->pid, size, buffer, buffer_size);
has_page_addr =
- (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK);
+ (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK);
if (n == NULL) {
if (size + sizeof(struct binder_buffer) + 4 >= buffer_size)
buffer_size = size; /* no room for other buffers */
else
buffer_size = size + sizeof(struct binder_buffer);
}
- end_page_addr = (void *)PAGE_ALIGN((size_t)buffer->data + buffer_size);
+ end_page_addr =
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data + buffer_size);
if (end_page_addr > has_page_addr)
end_page_addr = has_page_addr;
if (binder_update_page_range(proc, 1,
- (void *)PAGE_ALIGN((size_t)buffer->data), end_page_addr, NULL))
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL))
return NULL;
rb_erase(best_fit, &proc->free_buffers);
static void *buffer_start_page(struct binder_buffer *buffer)
{
- return (void *)((size_t)buffer & PAGE_MASK);
+ return (void *)((uintptr_t)buffer & PAGE_MASK);
}
static void *buffer_end_page(struct binder_buffer *buffer)
{
- return (void *)(((size_t)(buffer + 1) - 1) & PAGE_MASK);
+ return (void *)(((uintptr_t)(buffer + 1) - 1) & PAGE_MASK);
}
static void binder_delete_free_buffer(
}
binder_update_page_range(proc, 0,
- (void *)PAGE_ALIGN((size_t)buffer->data),
- (void *)(((size_t)buffer->data + buffer_size) & PAGE_MASK),
+ (void *)PAGE_ALIGN((uintptr_t)buffer->data),
+ (void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK),
NULL);
rb_erase(&buffer->rb_node, &proc->allocated_buffers);
buffer->free = 1;
if (!(tr->flags & TF_ONE_WAY) && thread->transaction_stack) {
struct binder_transaction *tmp;
tmp = thread->transaction_stack;
+ if (tmp->to_thread != thread) {
+ binder_user_error("binder: %d:%d got new "
+ "transaction with bad transaction stack"
+ ", transaction %d has target %d:%d\n",
+ proc->pid, thread->pid, tmp->debug_id,
+ tmp->to_proc ? tmp->to_proc->pid : 0,
+ tmp->to_thread ?
+ tmp->to_thread->pid : 0);
+ return_error = BR_FAILED_REPLY;
+ goto err_bad_call_stack;
+ }
while (tmp) {
if (tmp->from && tmp->from->proc == target_proc)
target_thread = tmp->from;
return_error = BR_FAILED_REPLY;
goto err_copy_data_failed;
}
+ if (!IS_ALIGNED(tr->offsets_size, sizeof(size_t))) {
+ binder_user_error("binder: %d:%d got transaction with "
+ "invalid offsets size, %zd\n",
+ proc->pid, thread->pid, tr->offsets_size);
+ return_error = BR_FAILED_REPLY;
+ goto err_bad_offset;
+ }
off_end = (void *)offp + tr->offsets_size;
for (; offp < off_end; offp++) {
struct flat_binder_object *fp;
- if (*offp > t->buffer->data_size - sizeof(*fp)) {
+ if (*offp > t->buffer->data_size - sizeof(*fp) ||
+ t->buffer->data_size < sizeof(*fp) ||
+ !IS_ALIGNED(*offp, sizeof(void *))) {
binder_user_error("binder: %d:%d got transaction with "
"invalid offset, %zd\n",
proc->pid, thread->pid, *offp);
return_error = BR_FAILED_REPLY;
goto err_fget_failed;
}
- target_fd = task_get_unused_fd_flags(target_proc->tsk, O_CLOEXEC);
+ target_fd = task_get_unused_fd_flags(target_proc, O_CLOEXEC);
if (target_fd < 0) {
fput(file);
return_error = BR_FAILED_REPLY;
goto err_get_unused_fd_failed;
}
- task_fd_install(target_proc->tsk, target_fd, file);
+ task_fd_install(target_proc, target_fd, file);
if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
printk(KERN_INFO " fd %ld -> %d\n", fp->handle, target_fd);
/* TODO: fput? */
off_end = (void *)offp + buffer->offsets_size;
for (; offp < off_end; offp++) {
struct flat_binder_object *fp;
- if (*offp > buffer->data_size - sizeof(*fp)) {
+ if (*offp > buffer->data_size - sizeof(*fp) ||
+ buffer->data_size < sizeof(*fp) ||
+ !IS_ALIGNED(*offp, sizeof(void *))) {
printk(KERN_ERR "binder: transaction release %d bad"
"offset %zd, size %zd\n", debug_id, *offp, buffer->data_size);
continue;
if (binder_debug_mask & BINDER_DEBUG_TRANSACTION)
printk(KERN_INFO " fd %ld\n", fp->handle);
if (failed_at)
- task_close_fd(proc->tsk, fp->handle);
+ task_close_fd(proc, fp->handle);
break;
default:
tr.data_size = t->buffer->data_size;
tr.offsets_size = t->buffer->offsets_size;
- tr.data.ptr.buffer = (void *)((void *)t->buffer->data + proc->user_buffer_offset);
+ tr.data.ptr.buffer = (void *)t->buffer->data + proc->user_buffer_offset;
tr.data.ptr.offsets = tr.data.ptr.buffer + ALIGN(t->buffer->data_size, sizeof(void *));
if (put_user(cmd, (uint32_t __user *)ptr))
(unsigned long)pgprot_val(vma->vm_page_prot));
dump_stack();
}
+
static void binder_vma_close(struct vm_area_struct *vma)
{
struct binder_proc *proc = vma->vm_private_data;
(vma->vm_end - vma->vm_start) / SZ_1K, vma->vm_flags,
(unsigned long)pgprot_val(vma->vm_page_prot));
proc->vma = NULL;
+ binder_defer_work(proc, BINDER_DEFERRED_PUT_FILES);
}
static struct vm_operations_struct binder_vm_ops = {
}
vma->vm_flags = (vma->vm_flags | VM_DONTCOPY) & ~VM_MAYWRITE;
+ if (proc->buffer) {
+ ret = -EBUSY;
+ failure_string = "already mapped";
+ goto err_already_mapped;
+ }
+
area = get_vm_area(vma->vm_end - vma->vm_start, VM_IOREMAP);
if (area == NULL) {
ret = -ENOMEM;
goto err_get_vm_area_failed;
}
proc->buffer = area->addr;
- proc->user_buffer_offset = vma->vm_start - (size_t)proc->buffer;
+ proc->user_buffer_offset = vma->vm_start - (uintptr_t)proc->buffer;
#ifdef CONFIG_CPU_CACHE_VIPT
if (cache_is_vipt_aliasing()) {
binder_insert_free_buffer(proc, buffer);
proc->free_async_space = proc->buffer_size / 2;
barrier();
+ proc->files = get_files_struct(current);
proc->vma = vma;
/*printk(KERN_INFO "binder_mmap: %d %lx-%lx maps %p\n", proc->pid, vma->vm_start, vma->vm_end, proc->buffer);*/
err_alloc_small_buf_failed:
kfree(proc->pages);
+ proc->pages = NULL;
err_alloc_pages_failed:
vfree(proc->buffer);
+ proc->buffer = NULL;
err_get_vm_area_failed:
- mutex_unlock(&binder_lock);
+err_already_mapped:
err_bad_arg:
printk(KERN_ERR "binder_mmap: %d %lx-%lx %s failed %d\n", proc->pid, vma->vm_start, vma->vm_end, failure_string, ret);
return ret;
if (binder_proc_dir_entry_proc) {
char strbuf[11];
snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
+ remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
create_proc_read_entry(strbuf, S_IRUGO, binder_proc_dir_entry_proc, binder_read_proc_proc, proc);
}
static int binder_flush(struct file *filp, fl_owner_t id)
{
- struct rb_node *n;
struct binder_proc *proc = filp->private_data;
- int wake_count = 0;
- mutex_lock(&binder_lock);
+ binder_defer_work(proc, BINDER_DEFERRED_FLUSH);
+
+ return 0;
+}
+
+static void binder_deferred_flush(struct binder_proc *proc)
+{
+ struct rb_node *n;
+ int wake_count = 0;
for (n = rb_first(&proc->threads); n != NULL; n = rb_next(n)) {
struct binder_thread *thread = rb_entry(n, struct binder_thread, rb_node);
thread->looper |= BINDER_LOOPER_STATE_NEED_RETURN;
}
}
wake_up_interruptible_all(&proc->wait);
- mutex_unlock(&binder_lock);
if (binder_debug_mask & BINDER_DEBUG_OPEN_CLOSE)
printk(KERN_INFO "binder_flush: %d woke %d threads\n", proc->pid, wake_count);
-
- return 0;
}
static int binder_release(struct inode *nodp, struct file *filp)
{
- struct hlist_node *pos;
- struct binder_transaction *t;
- struct rb_node *n;
struct binder_proc *proc = filp->private_data;
- int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
-
if (binder_proc_dir_entry_proc) {
char strbuf[11];
snprintf(strbuf, sizeof(strbuf), "%u", proc->pid);
remove_proc_entry(strbuf, binder_proc_dir_entry_proc);
}
- mutex_lock(&binder_lock);
+
+ binder_defer_work(proc, BINDER_DEFERRED_RELEASE);
+
+ return 0;
+}
+
+static void binder_deferred_release(struct binder_proc *proc)
+{
+ struct hlist_node *pos;
+ struct binder_transaction *t;
+ struct rb_node *n;
+ int threads, nodes, incoming_refs, outgoing_refs, buffers, active_transactions, page_count;
+
+ BUG_ON(proc->vma);
+ BUG_ON(proc->files);
+
hlist_del(&proc->proc_node);
if (binder_context_mgr_node && binder_context_mgr_node->proc == proc) {
if (binder_debug_mask & BINDER_DEBUG_DEAD_BINDER)
}
binder_stats.obj_deleted[BINDER_STAT_PROC]++;
- mutex_unlock(&binder_lock);
page_count = 0;
if (proc->pages) {
proc->pid, threads, nodes, incoming_refs, outgoing_refs, active_transactions, buffers, page_count);
kfree(proc);
- return 0;
+}
+
+static void binder_deferred_func(struct work_struct *work)
+{
+ struct binder_proc *proc;
+ struct files_struct *files;
+
+ int defer;
+ do {
+ mutex_lock(&binder_lock);
+ mutex_lock(&binder_deferred_lock);
+ if (!hlist_empty(&binder_deferred_list)) {
+ proc = hlist_entry(binder_deferred_list.first,
+ struct binder_proc, deferred_work_node);
+ hlist_del_init(&proc->deferred_work_node);
+ defer = proc->deferred_work;
+ proc->deferred_work = 0;
+ } else {
+ proc = NULL;
+ defer = 0;
+ }
+ mutex_unlock(&binder_deferred_lock);
+
+ files = NULL;
+ if (defer & BINDER_DEFERRED_PUT_FILES)
+ if ((files = proc->files))
+ proc->files = NULL;
+
+ if (defer & BINDER_DEFERRED_FLUSH)
+ binder_deferred_flush(proc);
+
+ if (defer & BINDER_DEFERRED_RELEASE)
+ binder_deferred_release(proc); /* frees proc */
+
+ mutex_unlock(&binder_lock);
+ if (files)
+ put_files_struct(files);
+ } while (proc);
+}
+static DECLARE_WORK(binder_deferred_work, binder_deferred_func);
+
+static void binder_defer_work(struct binder_proc *proc, int defer)
+{
+ mutex_lock(&binder_deferred_lock);
+ proc->deferred_work |= defer;
+ if (hlist_unhashed(&proc->deferred_work_node)) {
+ hlist_add_head(&proc->deferred_work_node,
+ &binder_deferred_list);
+ schedule_work(&binder_deferred_work);
+ }
+ mutex_unlock(&binder_deferred_lock);
}
static char *print_binder_transaction(char *buf, char *end, const char *prefix, struct binder_transaction *t)
return 0;
}
+static const struct net_device_ops at76_netdev_ops = {
+ .ndo_open = at76_open,
+ .ndo_stop = at76_stop,
+ .ndo_get_stats = at76_get_stats,
+ .ndo_start_xmit = at76_tx,
+ .ndo_tx_timeout = at76_tx_timeout,
+ .ndo_set_multicast_list = at76_set_multicast,
+ .ndo_set_mac_address = at76_set_mac_address,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
/* Register network device and initialize the hardware */
static int at76_init_new_device(struct at76_priv *priv,
struct usb_interface *interface)
priv->scan_mode = SCAN_TYPE_ACTIVE;
netdev->flags &= ~IFF_MULTICAST; /* not yet or never */
- netdev->open = at76_open;
- netdev->stop = at76_stop;
- netdev->get_stats = at76_get_stats;
+ netdev->netdev_ops = &at76_netdev_ops;
netdev->ethtool_ops = &at76_ethtool_ops;
/* Add pointers to enable iwspy support. */
priv->wireless_data.spy_data = &priv->spy_data;
netdev->wireless_data = &priv->wireless_data;
- netdev->hard_start_xmit = at76_tx;
- netdev->tx_timeout = at76_tx_timeout;
netdev->watchdog_timeo = 2 * HZ;
netdev->wireless_handlers = &at76_handler_def;
- netdev->set_multicast_list = at76_set_multicast;
- netdev->set_mac_address = at76_set_mac_address;
dev_alloc_name(netdev, "wlan%d");
ret = register_netdev(priv->netdev);
pci_set_master(pdev);
- r = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ r = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (r) {
dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_free_res;
copy:
Ian Abbott <abbotti@mev.co.uk>
Frank Mori Hess <fmhess@users.sourceforge.net>
- David Schleef <ds@schleef.org>
return Ret;
}
+static const struct net_device_ops epl_netdev_ops = {
+ .ndo_open = VEthOpen,
+ .ndo_stop = VEthClose,
+ .ndo_get_stats = VEthGetStats,
+ .ndo_start_xmit = VEthXmit,
+ .ndo_tx_timeout = VEthTimeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
tEplKernel VEthAddInstance(tEplDllkInitParam *pInitParam_p)
{
tEplKernel Ret = kEplSuccessful;
goto Exit;
}
- pVEthNetDevice_g->open = VEthOpen;
- pVEthNetDevice_g->stop = VEthClose;
- pVEthNetDevice_g->get_stats = VEthGetStats;
- pVEthNetDevice_g->hard_start_xmit = VEthXmit;
- pVEthNetDevice_g->tx_timeout = VEthTimeout;
+ pVEthNetDevice_g->netdev_ops = &epl_netdev_ops;
pVEthNetDevice_g->watchdog_timeo = EPL_VETH_TX_TIMEOUT;
pVEthNetDevice_g->destructor = free_netdev;
void et131x_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid);
void et131x_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid);
+static const struct net_device_ops et131x_netdev_ops = {
+ .ndo_open = et131x_open,
+ .ndo_stop = et131x_close,
+ .ndo_start_xmit = et131x_tx,
+ .ndo_set_multicast_list = et131x_multicast,
+ .ndo_tx_timeout = et131x_tx_timeout,
+ .ndo_change_mtu = et131x_change_mtu,
+ .ndo_set_mac_address = et131x_set_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_get_stats = et131x_stats,
+ .ndo_do_ioctl = et131x_ioctl,
+};
+
/**
* et131x_device_alloc
*
*/
//netdev->init = &et131x_init;
//netdev->set_config = &et131x_config;
- netdev->get_stats = &et131x_stats;
- netdev->open = &et131x_open;
- netdev->stop = &et131x_close;
- netdev->do_ioctl = &et131x_ioctl;
- netdev->set_multicast_list = &et131x_multicast;
- netdev->hard_start_xmit = &et131x_tx;
- netdev->tx_timeout = &et131x_tx_timeout;
netdev->watchdog_timeo = ET131X_TX_TIMEOUT;
- netdev->change_mtu = &et131x_change_mtu;
- netdev->set_mac_address = &et131x_set_mac_addr;
+ netdev->netdev_ops = &et131x_netdev_ops;
//netdev->ethtool_ops = &et131x_ethtool_ops;
/*
* Attempt to instantiate an I2C client by ID, probably loading a module.
*/
-static int init_i2c_module(struct i2c_adapter *adapter, int id, int addr)
+static int init_i2c_module(struct i2c_adapter *adapter, const char *type,
+ int id, int addr)
{
+ struct i2c_board_info info;
char *modname;
switch (id) {
}
if (modname != NULL)
request_module(modname);
- if (wis_i2c_probe_device(adapter, id, addr) == 1)
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ info.addr = addr;
+ strlcpy(info.type, type, I2C_NAME_SIZE);
+ if (!i2c_new_device(adapter, &info))
return 0;
if (modname != NULL)
printk(KERN_INFO
if (go->i2c_adapter_online) {
for (i = 0; i < go->board_info->num_i2c_devs; ++i)
init_i2c_module(&go->i2c_adapter,
+ go->board_info->i2c_devs[i].type,
go->board_info->i2c_devs[i].id,
go->board_info->i2c_devs[i].addr);
-#ifdef TUNER_SET_TYPE_ADDR
- if (go->tuner_type >= 0) {
- struct tuner_setup tun_setup = {
- .mode_mask = T_ANALOG_TV,
- .addr = ADDR_UNSET,
- .type = go->tuner_type
- };
- i2c_clients_command(&go->i2c_adapter,
- TUNER_SET_TYPE_ADDR, &tun_setup);
- }
-#else
- if (go->tuner_type >= 0)
- i2c_clients_command(&go->i2c_adapter,
- TUNER_SET_TYPE, &go->tuner_type);
-#endif
if (go->board_id == GO7007_BOARDID_ADLINK_MPG24)
i2c_clients_command(&go->i2c_adapter,
DECODER_SET_CHANNEL, &go->channel_number);
#include "go7007-priv.h"
#include "wis-i2c.h"
-/************** Registration interface for I2C client drivers **************/
-
-/* Since there's no way to auto-probe the I2C devices connected to the I2C
- * bus on the go7007, we have this silly little registration system that
- * client drivers can use to register their I2C driver ID and their
- * detect_client function (the one that's normally passed to i2c_probe).
- *
- * When a new go7007 device is connected, we can look up in a board info
- * table by the USB or PCI vendor/product/revision ID to determine
- * which I2C client module to load. The client driver module will register
- * itself here, and then we can call the registered detect_client function
- * to force-load a new client at the address listed in the board info table.
- *
- * Really the I2C subsystem should have a way to force-load I2C client
- * drivers when we have a priori knowledge of what's on the bus, especially
- * since the existing I2C auto-probe mechanism is so hokey, but we'll use
- * our own mechanism for the time being. */
-
-struct wis_i2c_client_driver {
- unsigned int id;
- found_proc found_proc;
- struct list_head list;
-};
-
-static LIST_HEAD(i2c_client_drivers);
-static DECLARE_MUTEX(i2c_client_driver_list_lock);
-
-/* Client drivers register here by their I2C driver ID */
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc)
-{
- struct wis_i2c_client_driver *driver;
-
- driver = kmalloc(sizeof(struct wis_i2c_client_driver), GFP_KERNEL);
- if (driver == NULL)
- return -ENOMEM;
- driver->id = id;
- driver->found_proc = found_proc;
-
- down(&i2c_client_driver_list_lock);
- list_add_tail(&driver->list, &i2c_client_drivers);
- up(&i2c_client_driver_list_lock);
-
- return 0;
-}
-EXPORT_SYMBOL(wis_i2c_add_driver);
-
-void wis_i2c_del_driver(found_proc found_proc)
-{
- struct wis_i2c_client_driver *driver, *next;
-
- down(&i2c_client_driver_list_lock);
- list_for_each_entry_safe(driver, next, &i2c_client_drivers, list)
- if (driver->found_proc == found_proc) {
- list_del(&driver->list);
- kfree(driver);
- }
- up(&i2c_client_driver_list_lock);
-}
-EXPORT_SYMBOL(wis_i2c_del_driver);
-
-/* The main go7007 driver calls this to instantiate a client by driver
- * ID and bus address, which are both stored in the board info table */
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
- unsigned int id, int addr)
-{
- struct wis_i2c_client_driver *driver;
- int found = 0;
-
- if (addr < 0 || addr > 0x7f)
- return -1;
- down(&i2c_client_driver_list_lock);
- list_for_each_entry(driver, &i2c_client_drivers, list)
- if (driver->id == id) {
- if (driver->found_proc(adapter, addr, 0) == 0)
- found = 1;
- break;
- }
- up(&i2c_client_driver_list_lock);
- return found;
-}
-
/********************* Driver for on-board I2C adapter *********************/
/* #define GO7007_I2C_DEBUG */
static struct i2c_adapter go7007_adap_templ = {
.owner = THIS_MODULE,
- .class = I2C_CLASS_TV_ANALOG,
.name = "WIS GO7007SB",
- .id = I2C_ALGO_GO7007,
.algo = &go7007_algo,
};
int audio_main_div;
int num_i2c_devs;
struct {
+ const char *type;
int id;
int addr;
} i2c_devs[4];
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_saa7115",
.id = I2C_DRIVERID_WIS_SAA7115,
.addr = 0x20,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_saa7113",
.id = I2C_DRIVERID_WIS_SAA7113,
.addr = 0x25,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_saa7115",
.id = I2C_DRIVERID_WIS_SAA7115,
.addr = 0x20,
},
.num_i2c_devs = 3,
.i2c_devs = {
{
+ .type = "wis_saa7115",
.id = I2C_DRIVERID_WIS_SAA7115,
.addr = 0x20,
},
{
+ .type = "wis_uda1342",
.id = I2C_DRIVERID_WIS_UDA1342,
.addr = 0x1a,
},
{
+ .type = "wis_sony_tuner",
.id = I2C_DRIVERID_WIS_SONY_TUNER,
.addr = 0x60,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_ov7640",
.id = I2C_DRIVERID_WIS_OV7640,
.addr = 0x21,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_tw9903",
.id = I2C_DRIVERID_WIS_TW9903,
.addr = 0x44,
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "wis_twTW2804",
.id = I2C_DRIVERID_WIS_TW2804,
.addr = 0x00, /* yes, really */
},
.num_i2c_devs = 1,
.i2c_devs = {
{
+ .type = "s2250_board",
.id = I2C_DRIVERID_S2250,
- .addr = 0x34,
+ .addr = 0x43,
},
},
.num_inputs = 2,
static struct i2c_adapter go7007_usb_adap_templ = {
.owner = THIS_MODULE,
- .class = I2C_CLASS_TV_ANALOG,
.name = "WIS GO7007SB EZ-USB",
- .id = I2C_ALGO_GO7007_USB,
.algo = &go7007_usb_algo,
};
extern void s2250loader_cleanup(void);
#define TLV320_ADDRESS 0x34
-#define S2250_VIDDEC 0x86
#define VPX322_ADDR_ANALOGCONTROL1 0x02
#define VPX322_ADDR_BRIGHTNESS0 0x0127
#define VPX322_ADDR_BRIGHTNESS1 0x0131
int hue;
int reg12b_val;
int audio_input;
+ struct i2c_client *audio;
};
/* from go7007-usb.c which is Copyright (C) 2005-2006 Micronas USA Inc.*/
{
struct v4l2_audio *audio = arg;
- client->addr = TLV320_ADDRESS;
switch (audio->index) {
case 0:
- write_reg(client, 0x08, 0x02); /* Line In */
+ write_reg(dec->audio, 0x08, 0x02); /* Line In */
break;
case 1:
- write_reg(client, 0x08, 0x04); /* Mic */
+ write_reg(dec->audio, 0x08, 0x04); /* Mic */
break;
case 2:
- write_reg(client, 0x08, 0x05); /* Mic Boost */
+ write_reg(dec->audio, 0x08, 0x05); /* Mic Boost */
break;
default:
return -EINVAL;
return 0;
}
-static struct i2c_driver s2250_driver;
-
-static struct i2c_client s2250_client_templ = {
- .name = "Sensoray 2250",
- .driver = &s2250_driver,
-};
-
-static int s2250_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int s2250_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_client *audio;
+ struct i2c_adapter *adapter = client->adapter;
struct s2250 *dec;
u8 *data;
struct go7007 *go = i2c_get_adapdata(adapter);
struct go7007_usb *usb = go->hpi_context;
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
+ audio = i2c_new_dummy(adapter, TLV320_ADDRESS >> 1);
+ if (audio == NULL)
return -ENOMEM;
- memcpy(client, &s2250_client_templ,
- sizeof(s2250_client_templ));
- client->adapter = adapter;
dec = kmalloc(sizeof(struct s2250), GFP_KERNEL);
if (dec == NULL) {
- kfree(client);
+ i2c_unregister_device(audio);
return -ENOMEM;
}
dec->contrast = 50;
dec->saturation = 50;
dec->hue = 0;
- client->addr = TLV320_ADDRESS;
+ dec->audio = audio;
i2c_set_clientdata(client, dec);
printk(KERN_DEBUG
adapter->name);
/* initialize the audio */
- client->addr = TLV320_ADDRESS;
- if (write_regs(client, aud_regs) < 0) {
+ if (write_regs(audio, aud_regs) < 0) {
printk(KERN_ERR
"s2250: error initializing audio\n");
- kfree(client);
+ i2c_unregister_device(audio);
kfree(dec);
return 0;
}
- client->addr = S2250_VIDDEC;
- i2c_set_clientdata(client, dec);
if (write_regs(client, vid_regs) < 0) {
printk(KERN_ERR
"s2250: error initializing decoder\n");
- kfree(client);
+ i2c_unregister_device(audio);
kfree(dec);
return 0;
}
if (write_regs_fp(client, vid_regs_fp) < 0) {
printk(KERN_ERR
"s2250: error initializing decoder\n");
- kfree(client);
+ i2c_unregister_device(audio);
kfree(dec);
return 0;
}
up(&usb->i2c_lock);
}
- i2c_attach_client(client);
printk("s2250: initialized successfully\n");
return 0;
}
-static int s2250_detach(struct i2c_client *client)
+static int s2250_remove(struct i2c_client *client)
{
struct s2250 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
+ i2c_unregister_device(dec->audio);
kfree(dec);
return 0;
}
+static struct i2c_device_id s2250_id[] = {
+ { "s2250_board", 0 },
+ { }
+};
+
static struct i2c_driver s2250_driver = {
.driver = {
.name = "Sensoray 2250 board driver",
},
- .id = I2C_DRIVERID_S2250,
- .detach_client = s2250_detach,
+ .probe = s2250_probe,
+ .remove = s2250_remove,
.command = s2250_command,
+ .id_table = s2250_id,
};
static int __init s2250_init(void)
r = i2c_add_driver(&s2250_driver);
if (r < 0)
- return r;
- return wis_i2c_add_driver(s2250_driver.id, s2250_detect);
+ s2250loader_cleanup();
+
+ return r;
}
static void __exit s2250_cleanup(void)
{
- wis_i2c_del_driver(s2250_detect);
i2c_del_driver(&s2250_driver);
s2250loader_cleanup();
#define I2C_DRIVERID_WIS_OV7640 0xf0f5
#define I2C_DRIVERID_WIS_TW2804 0xf0f6
#define I2C_DRIVERID_S2250 0xf0f7
-#define I2C_ALGO_GO7007 0xf00000
-#define I2C_ALGO_GO7007_USB 0xf10000
/* Flag to indicate that the client needs to be accessed with SCCB semantics */
/* We re-use the I2C_M_TEN value so the flag passes through the masks in the
* core I2C code. Major kludge, but the I2C layer ain't exactly flexible. */
#define I2C_CLIENT_SCCB 0x10
-typedef int (*found_proc) (struct i2c_adapter *, int, int);
-int wis_i2c_add_driver(unsigned int id, found_proc found_proc);
-void wis_i2c_del_driver(found_proc found_proc);
-
-int wis_i2c_probe_device(struct i2c_adapter *adapter,
- unsigned int id, int addr);
-
/* Definitions for new video decoder commands */
struct video_decoder_resolution {
return 0;
}
-static struct i2c_driver wis_ov7640_driver;
-
-static struct i2c_client wis_ov7640_client_templ = {
- .name = "OV7640 (WIS)",
- .driver = &wis_ov7640_driver,
-};
-
-static int wis_ov7640_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_ov7640_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_ov7640_client_templ,
- sizeof(wis_ov7640_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
+
client->flags = I2C_CLIENT_SCCB;
printk(KERN_DEBUG
"wis-ov7640: initializing OV7640 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR "wis-ov7640: error initializing OV7640\n");
- kfree(client);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_ov7640_detach(struct i2c_client *client)
+static int wis_ov7640_remove(struct i2c_client *client)
{
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
return 0;
}
+static struct i2c_device_id wis_ov7640_id[] = {
+ { "wis_ov7640", 0 },
+ { }
+};
+
static struct i2c_driver wis_ov7640_driver = {
.driver = {
.name = "WIS OV7640 I2C driver",
},
- .id = I2C_DRIVERID_WIS_OV7640,
- .detach_client = wis_ov7640_detach,
+ .probe = wis_ov7640_probe,
+ .remove = wis_ov7640_remove,
+ .id_table = wis_ov7640_id,
};
static int __init wis_ov7640_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_ov7640_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_ov7640_driver.id, wis_ov7640_detect);
+ return i2c_add_driver(&wis_ov7640_driver);
}
static void __exit wis_ov7640_cleanup(void)
{
- wis_i2c_del_driver(wis_ov7640_detect);
i2c_del_driver(&wis_ov7640_driver);
}
return 0;
}
-static struct i2c_driver wis_saa7113_driver;
-
-static struct i2c_client wis_saa7113_client_templ = {
- .name = "SAA7113 (WIS)",
- .driver = &wis_saa7113_driver,
-};
-
-static int wis_saa7113_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7113_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_saa7113 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_saa7113_client_templ,
- sizeof(wis_saa7113_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_saa7113), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
dec->contrast = 71;
printk(KERN_DEBUG
"wis-saa7113: initializing SAA7113 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR
"wis-saa7113: error initializing SAA7113\n");
- kfree(client);
kfree(dec);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_saa7113_detach(struct i2c_client *client)
+static int wis_saa7113_remove(struct i2c_client *client)
{
struct wis_saa7113 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_saa7113_id[] = {
+ { "wis_saa7113", 0 },
+ { }
+};
+
static struct i2c_driver wis_saa7113_driver = {
.driver = {
.name = "WIS SAA7113 I2C driver",
},
- .id = I2C_DRIVERID_WIS_SAA7113,
- .detach_client = wis_saa7113_detach,
+ .probe = wis_saa7113_probe,
+ .remove = wis_saa7113_remove,
.command = wis_saa7113_command,
+ .id_table = wis_saa7113_id,
};
static int __init wis_saa7113_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_saa7113_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_saa7113_driver.id, wis_saa7113_detect);
+ return i2c_add_driver(&wis_saa7113_driver);
}
static void __exit wis_saa7113_cleanup(void)
{
- wis_i2c_del_driver(wis_saa7113_detect);
i2c_del_driver(&wis_saa7113_driver);
}
return 0;
}
-static struct i2c_driver wis_saa7115_driver;
-
-static struct i2c_client wis_saa7115_client_templ = {
- .name = "SAA7115 (WIS)",
- .driver = &wis_saa7115_driver,
-};
-
-static int wis_saa7115_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_saa7115_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_saa7115 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_saa7115_client_templ,
- sizeof(wis_saa7115_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_saa7115), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
dec->contrast = 64;
printk(KERN_DEBUG
"wis-saa7115: initializing SAA7115 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR
"wis-saa7115: error initializing SAA7115\n");
- kfree(client);
kfree(dec);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_saa7115_detach(struct i2c_client *client)
+static int wis_saa7115_remove(struct i2c_client *client)
{
struct wis_saa7115 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_saa7115_id[] = {
+ { "wis_saa7115", 0 },
+ { }
+};
+
static struct i2c_driver wis_saa7115_driver = {
.driver = {
.name = "WIS SAA7115 I2C driver",
},
- .id = I2C_DRIVERID_WIS_SAA7115,
- .detach_client = wis_saa7115_detach,
+ .probe = wis_saa7115_probe,
+ .remove = wis_saa7115_remove,
.command = wis_saa7115_command,
+ .id_table = wis_saa7115_id,
};
static int __init wis_saa7115_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_saa7115_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_saa7115_driver.id, wis_saa7115_detect);
+ return i2c_add_driver(&wis_saa7115_driver);
}
static void __exit wis_saa7115_cleanup(void)
{
- wis_i2c_del_driver(wis_saa7115_detect);
i2c_del_driver(&wis_saa7115_driver);
}
struct wis_sony_tuner *t = i2c_get_clientdata(client);
switch (cmd) {
+#if 0
#ifdef TUNER_SET_TYPE_ADDR
case TUNER_SET_TYPE_ADDR:
{
t->type, sony_tuners[t->type - 200].name);
break;
}
+#endif
case VIDIOC_G_FREQUENCY:
{
struct v4l2_frequency *f = arg;
return 0;
}
-static struct i2c_driver wis_sony_tuner_driver;
-
-static struct i2c_client wis_sony_tuner_client_templ = {
- .name = "Sony TV Tuner (WIS)",
- .driver = &wis_sony_tuner_driver,
-};
-
-static int wis_sony_tuner_detect(struct i2c_adapter *adapter,
- int addr, int kind)
+static int wis_sony_tuner_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_sony_tuner *t;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_sony_tuner_client_templ,
- sizeof(wis_sony_tuner_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
t = kmalloc(sizeof(struct wis_sony_tuner), GFP_KERNEL);
- if (t == NULL) {
- kfree(client);
+ if (t == NULL)
return -ENOMEM;
- }
+
t->type = -1;
t->freq = 0;
t->mpxmode = 0;
printk(KERN_DEBUG
"wis-sony-tuner: initializing tuner at address %d on %s\n",
- addr, adapter->name);
-
- i2c_attach_client(client);
+ client->addr, adapter->name);
return 0;
}
-static int wis_sony_tuner_detach(struct i2c_client *client)
+static int wis_sony_tuner_remove(struct i2c_client *client)
{
struct wis_sony_tuner *t = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
+ i2c_set_clientdata(client, NULL);
kfree(t);
- kfree(client);
return 0;
}
+static struct i2c_device_id wis_sony_tuner_id[] = {
+ { "wis_sony_tuner", 0 },
+ { }
+};
+
static struct i2c_driver wis_sony_tuner_driver = {
.driver = {
.name = "WIS Sony TV Tuner I2C driver",
},
- .id = I2C_DRIVERID_WIS_SONY_TUNER,
- .detach_client = wis_sony_tuner_detach,
+ .probe = wis_sony_tuner_probe,
+ .remove = wis_sony_tuner_remove,
.command = tuner_command,
+ .id_table = wis_sony_tuner_id,
};
static int __init wis_sony_tuner_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_sony_tuner_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_sony_tuner_driver.id,
- wis_sony_tuner_detect);
+ return i2c_add_driver(&wis_sony_tuner_driver);
}
static void __exit wis_sony_tuner_cleanup(void)
{
- wis_i2c_del_driver(wis_sony_tuner_detect);
i2c_del_driver(&wis_sony_tuner_driver);
}
return 0;
}
-static struct i2c_driver wis_tw2804_driver;
-
-static struct i2c_client wis_tw2804_client_templ = {
- .name = "TW2804 (WIS)",
- .driver = &wis_tw2804_driver,
-};
-
-static int wis_tw2804_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw2804_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_tw2804 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_tw2804_client_templ,
- sizeof(wis_tw2804_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_tw2804), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->channel = -1;
dec->norm = V4L2_STD_NTSC;
dec->brightness = 128;
i2c_set_clientdata(client, dec);
printk(KERN_DEBUG "wis-tw2804: creating TW2804 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
- i2c_attach_client(client);
return 0;
}
-static int wis_tw2804_detach(struct i2c_client *client)
+static int wis_tw2804_remove(struct i2c_client *client)
{
struct wis_tw2804 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_tw2804_id[] = {
+ { "wis_tw2804", 0 },
+ { }
+};
+
static struct i2c_driver wis_tw2804_driver = {
.driver = {
.name = "WIS TW2804 I2C driver",
},
- .id = I2C_DRIVERID_WIS_TW2804,
- .detach_client = wis_tw2804_detach,
+ .probe = wis_tw2804_probe,
+ .remove = wis_tw2804_remove,
.command = wis_tw2804_command,
+ .id_table = wis_tw2804_id,
};
static int __init wis_tw2804_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_tw2804_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_tw2804_driver.id, wis_tw2804_detect);
+ return i2c_add_driver(&wis_tw2804_driver);
}
static void __exit wis_tw2804_cleanup(void)
{
- wis_i2c_del_driver(wis_tw2804_detect);
i2c_del_driver(&wis_tw2804_driver);
}
return 0;
}
-static struct i2c_driver wis_tw9903_driver;
-
-static struct i2c_client wis_tw9903_client_templ = {
- .name = "TW9903 (WIS)",
- .driver = &wis_tw9903_driver,
-};
-
-static int wis_tw9903_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_tw9903_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
struct wis_tw9903 *dec;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_tw9903_client_templ,
- sizeof(wis_tw9903_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
dec = kmalloc(sizeof(struct wis_tw9903), GFP_KERNEL);
- if (dec == NULL) {
- kfree(client);
+ if (dec == NULL)
return -ENOMEM;
- }
+
dec->norm = V4L2_STD_NTSC;
dec->brightness = 0;
dec->contrast = 0x60;
printk(KERN_DEBUG
"wis-tw9903: initializing TW9903 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
if (write_regs(client, initial_registers) < 0) {
printk(KERN_ERR "wis-tw9903: error initializing TW9903\n");
- kfree(client);
kfree(dec);
- return 0;
+ return -ENODEV;
}
- i2c_attach_client(client);
return 0;
}
-static int wis_tw9903_detach(struct i2c_client *client)
+static int wis_tw9903_remove(struct i2c_client *client)
{
struct wis_tw9903 *dec = i2c_get_clientdata(client);
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
- kfree(client);
+ i2c_set_clientdata(client, NULL);
kfree(dec);
return 0;
}
+static struct i2c_device_id wis_tw9903_id[] = {
+ { "wis_tw9903", 0 },
+ { }
+};
+
static struct i2c_driver wis_tw9903_driver = {
.driver = {
.name = "WIS TW9903 I2C driver",
},
- .id = I2C_DRIVERID_WIS_TW9903,
- .detach_client = wis_tw9903_detach,
+ .probe = wis_tw9903_probe,
+ .remove = wis_tw9903_remove,
.command = wis_tw9903_command,
+ .id_table = wis_tw9903_id,
};
static int __init wis_tw9903_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_tw9903_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_tw9903_driver.id, wis_tw9903_detect);
+ return i2c_add_driver(&wis_tw9903_driver);
}
static void __exit wis_tw9903_cleanup(void)
{
- wis_i2c_del_driver(wis_tw9903_detect);
i2c_del_driver(&wis_tw9903_driver);
}
return 0;
}
-static struct i2c_driver wis_uda1342_driver;
-
-static struct i2c_client wis_uda1342_client_templ = {
- .name = "UDA1342 (WIS)",
- .driver = &wis_uda1342_driver,
-};
-
-static int wis_uda1342_detect(struct i2c_adapter *adapter, int addr, int kind)
+static int wis_uda1342_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
- struct i2c_client *client;
+ struct i2c_adapter *adapter = client->adapter;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
- return 0;
-
- client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (client == NULL)
- return -ENOMEM;
- memcpy(client, &wis_uda1342_client_templ,
- sizeof(wis_uda1342_client_templ));
- client->adapter = adapter;
- client->addr = addr;
+ return -ENODEV;
printk(KERN_DEBUG
"wis-uda1342: initializing UDA1342 at address %d on %s\n",
- addr, adapter->name);
+ client->addr, adapter->name);
write_reg(client, 0x00, 0x8000); /* reset registers */
write_reg(client, 0x00, 0x1241); /* select input 1 */
- i2c_attach_client(client);
return 0;
}
-static int wis_uda1342_detach(struct i2c_client *client)
+static int wis_uda1342_remove(struct i2c_client *client)
{
- int r;
-
- r = i2c_detach_client(client);
- if (r < 0)
- return r;
-
- kfree(client);
return 0;
}
+static struct i2c_device_id wis_uda1342_id[] = {
+ { "wis_uda1342", 0 },
+ { }
+};
+
static struct i2c_driver wis_uda1342_driver = {
.driver = {
.name = "WIS UDA1342 I2C driver",
},
- .id = I2C_DRIVERID_WIS_UDA1342,
- .detach_client = wis_uda1342_detach,
+ .probe = wis_uda1342_probe,
+ .remove = wis_uda1342_remove,
.command = wis_uda1342_command,
+ .id_table = wis_uda1342_id,
};
static int __init wis_uda1342_init(void)
{
- int r;
-
- r = i2c_add_driver(&wis_uda1342_driver);
- if (r < 0)
- return r;
- return wis_i2c_add_driver(wis_uda1342_driver.id, wis_uda1342_detect);
+ return i2c_add_driver(&wis_uda1342_driver);
}
static void __exit wis_uda1342_cleanup(void)
{
- wis_i2c_del_driver(wis_uda1342_detect);
i2c_del_driver(&wis_uda1342_driver);
}
{
static int dev;
struct snd_card *card;
+ int err;
- card = snd_card_new(line6_index[dev], line6_id[dev], THIS_MODULE, 0);
-
- if (card == NULL)
- return -ENOMEM;
+ err = snd_card_create(line6_index[dev], line6_id[dev], THIS_MODULE, 0,
+ &card);
+ if (err < 0)
+ return err;
line6->card = card;
return 0;
}
+static const struct net_device_ops vap_netdev_ops = {
+ .ndo_open = zfLnxVapOpen,
+ .ndo_stop = zfLnxVapClose,
+ .ndo_start_xmit = zfLnxVapXmitFrame,
+ .ndo_get_stats = usbdrv_get_stats,
+ .ndo_change_mtu = usbdrv_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+#ifdef ZM_HOSTAPD_SUPPORT
+ .ndo_do_ioctl = usbdrv_ioctl,
+#else
+ .ndo_do_ioctl = NULL,
+#endif
+};
+
int zfLnxRegisterVapDev(struct net_device* parentDev, u16_t vapId)
{
/* Allocate net device structure */
vap[vapId].dev->ml_priv = parentDev->ml_priv;
//dev->hard_start_xmit = &zd1212_wds_xmit_frame;
- vap[vapId].dev->hard_start_xmit = &zfLnxVapXmitFrame;
- vap[vapId].dev->open = &zfLnxVapOpen;
- vap[vapId].dev->stop = &zfLnxVapClose;
- vap[vapId].dev->get_stats = &usbdrv_get_stats;
- vap[vapId].dev->change_mtu = &usbdrv_change_mtu;
-#ifdef ZM_HOSTAPD_SUPPORT
- vap[vapId].dev->do_ioctl = usbdrv_ioctl;
-#else
- vap[vapId].dev->do_ioctl = NULL;
-#endif
+ vap[vapId].dev->netdev_ops = &vap_netdev_ops;
vap[vapId].dev->destructor = free_netdev;
vap[vapId].dev->tx_queue_len = 0;
usb_unlink_urb(macp->RegInUrb);
}
+static const struct net_device_ops otus_netdev_ops = {
+ .ndo_open = usbdrv_open,
+ .ndo_stop = usbdrv_close,
+ .ndo_start_xmit = usbdrv_xmit_frame,
+ .ndo_change_mtu = usbdrv_change_mtu,
+ .ndo_get_stats = usbdrv_get_stats,
+ .ndo_set_multicast_list = usbdrv_set_multi,
+ .ndo_set_mac_address = usbdrv_set_mac,
+ .ndo_do_ioctl = usbdrv_ioctl,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
u8_t zfLnxInitSetup(struct net_device *dev, struct usbdrv_private *macp)
{
//unsigned char addr[6];
dev->wireless_handlers = (struct iw_handler_def *)&p80211wext_handler_def;
#endif
- dev->open = usbdrv_open;
- dev->hard_start_xmit = usbdrv_xmit_frame;
- dev->stop = usbdrv_close;
- dev->change_mtu = &usbdrv_change_mtu;
- dev->get_stats = usbdrv_get_stats;
- dev->set_multicast_list = usbdrv_set_multi;
- dev->set_mac_address = usbdrv_set_mac;
- dev->do_ioctl = usbdrv_ioctl;
+ dev->netdev_ops = &otus_netdev_ops;
dev->flags |= IFF_MULTICAST;
static struct usb_device_id zd1221_ids [] = {
{ USB_DEVICE(VENDOR_ATHR, PRODUCT_AR9170) },
{ USB_DEVICE(VENDOR_DLINK, PRODUCT_DWA160A) },
- { USB_DEVICE(0x0846, 0x9010) },
+ { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WNDA3100) },
+ { USB_DEVICE(VENDOR_NETGEAR, PRODUCT_WN111v2) },
{ } /* Terminating entry */
};
#define VENDOR_DLINK 0x07D1 //Dlink
#define PRODUCT_DWA160A 0x3C10
+#define VENDOR_NETGEAR 0x0846 /* NetGear */
+#define PRODUCT_WNDA3100 0x9010
+#define PRODUCT_WN111v2 0x9001
+
#endif
return g;
}
+static inline void pohmelfs_insert_config_entry(struct pohmelfs_sb *psb, struct pohmelfs_config *dst)
+{
+ struct pohmelfs_config *tmp;
+
+ INIT_LIST_HEAD(&dst->config_entry);
+
+ list_for_each_entry(tmp, &psb->state_list, config_entry) {
+ if (dst->state.ctl.prio > tmp->state.ctl.prio)
+ list_add_tail(&dst->config_entry, &tmp->config_entry);
+ }
+ if (list_empty(&dst->config_entry))
+ list_add_tail(&dst->config_entry, &psb->state_list);
+}
+
+static int pohmelfs_move_config_entry(struct pohmelfs_sb *psb,
+ struct pohmelfs_config *dst, struct pohmelfs_config *new)
+{
+ if ((dst->state.ctl.prio == new->state.ctl.prio) &&
+ (dst->state.ctl.perm == new->state.ctl.perm))
+ return 0;
+
+ dprintk("%s: dst: prio: %d, perm: %x, new: prio: %d, perm: %d.\n",
+ __func__, dst->state.ctl.prio, dst->state.ctl.perm,
+ new->state.ctl.prio, new->state.ctl.perm);
+ dst->state.ctl.prio = new->state.ctl.prio;
+ dst->state.ctl.perm = new->state.ctl.perm;
+
+ list_del_init(&dst->config_entry);
+ pohmelfs_insert_config_entry(psb, dst);
+ return 0;
+}
+
+/*
+ * pohmelfs_copy_config() is used to copy new state configs from the
+ * config group (controlled by the netlink messages) into the superblock.
+ * This happens either at startup time where no transactions can access
+ * the list of the configs (and thus list of the network states), or at
+ * run-time, where it is protected by the psb->state_lock.
+ */
int pohmelfs_copy_config(struct pohmelfs_sb *psb)
{
struct pohmelfs_config_group *g;
err = 0;
list_for_each_entry(dst, &psb->state_list, config_entry) {
if (pohmelfs_config_eql(&dst->state.ctl, &c->state.ctl)) {
- err = -EEXIST;
+ err = pohmelfs_move_config_entry(psb, dst, c);
+ if (!err)
+ err = -EEXIST;
break;
}
}
memcpy(&dst->state.ctl, &c->state.ctl, sizeof(struct pohmelfs_ctl));
- list_add_tail(&dst->config_entry, &psb->state_list);
+ pohmelfs_insert_config_entry(psb, dst);
err = pohmelfs_state_init_one(psb, dst);
if (err) {
return err;
}
+static int pohmelfs_modify_config(struct pohmelfs_ctl *old, struct pohmelfs_ctl *new)
+{
+ old->perm = new->perm;
+ old->prio = new->prio;
+ return 0;
+}
+
static int pohmelfs_cn_ctl(struct cn_msg *msg, int action)
{
struct pohmelfs_config_group *g;
g->num_entry--;
kfree(c);
goto out_unlock;
+ } else if (action == POHMELFS_FLAGS_MODIFY) {
+ err = pohmelfs_modify_config(sc, ctl);
+ goto out_unlock;
} else {
err = -EEXIST;
goto out_unlock;
}
memcpy(&c->state.ctl, ctl, sizeof(struct pohmelfs_ctl));
g->num_entry++;
+
list_add_tail(&c->config_entry, &g->config_list);
out_unlock:
switch (msg->flags) {
case POHMELFS_FLAGS_ADD:
- err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_ADD);
- break;
case POHMELFS_FLAGS_DEL:
- err = pohmelfs_cn_ctl(msg, POHMELFS_FLAGS_DEL);
+ case POHMELFS_FLAGS_MODIFY:
+ err = pohmelfs_cn_ctl(msg, msg->flags);
break;
case POHMELFS_FLAGS_SHOW:
err = pohmelfs_cn_disp(msg);
{
struct inode *inode = &pi->vfs_inode;
struct pohmelfs_sb *psb = POHMELFS_SB(inode->i_sb);
- long ret = msecs_to_jiffies(25000);
+ long ret = psb->wait_on_page_timeout;
int err;
dprintk("%s: dir: %llu, state: %lx: remote_synced: %d.\n",
dprintk("%s: parent: %llu, fpos: %llu, hash: %08lx.\n",
__func__, pi->ino, (u64)file->f_pos,
(unsigned long)file->private_data);
-
+#if 0
err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
if (err)
return err;
-
+#endif
err = pohmelfs_sync_remote_dir(pi);
if (err)
return err;
need_lock = pohmelfs_need_lock(parent, lock_type);
- err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
- if (err)
- goto out;
-
str.hash = jhash(dentry->d_name.name, dentry->d_name.len, 0);
mutex_lock(&parent->offset_lock);
ino = n->ino;
mutex_unlock(&parent->offset_lock);
- dprintk("%s: 1 ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx.\n",
- __func__, ino, inode, str.name, str.hash, parent->state);
+ dprintk("%s: start ino: %lu, inode: %p, name: '%s', hash: %x, parent_state: %lx, need_lock: %d.\n",
+ __func__, ino, inode, str.name, str.hash, parent->state, need_lock);
if (ino) {
inode = ilookup(dir->i_sb, ino);
goto out;
}
- dprintk("%s: dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
+ dprintk("%s: no inode dir: %p, dir_ino: %llu, name: '%s', len: %u, dir_state: %lx, ino: %lu.\n",
__func__, dir, parent->ino,
str.name, str.len, parent->state, ino);
goto out;
}
+ err = pohmelfs_data_lock(parent, 0, ~0, lock_type);
+ if (err)
+ goto out;
+
err = pohmelfs_lookup_single(parent, &str, ino);
if (err)
goto out;
if (ino) {
inode = ilookup(dir->i_sb, ino);
- printk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
+ dprintk("%s: second lookup ino: %lu, inode: %p, name: '%s', hash: %x.\n",
__func__, ino, inode, str.name, str.hash);
if (!inode) {
- printk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
+ dprintk("%s: No inode for ino: %lu, name: '%s', hash: %x.\n",
__func__, ino, str.name, str.hash);
//return NULL;
return ERR_PTR(-EACCES);
static int pohmelfs_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat)
{
struct inode *inode = dentry->d_inode;
+#if 0
struct pohmelfs_inode *pi = POHMELFS_I(inode);
int err;
err = pohmelfs_data_lock(pi, 0, ~0, POHMELFS_READ_LOCK);
if (err)
return err;
-
dprintk("%s: ino: %llu, mode: %o, uid: %u, gid: %u, size: %llu.\n",
__func__, pi->ino, inode->i_mode, inode->i_uid,
inode->i_gid, inode->i_size);
+#endif
generic_fillattr(inode, stat);
return 0;
kfree(psb);
sb->s_fs_info = NULL;
-
- pohmelfs_ftrans_exit();
-}
-
-static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
-{
- *flags |= MS_RDONLY;
- return 0;
}
static int pohmelfs_statfs(struct dentry *dentry, struct kstatfs *buf)
return 0;
}
-static const struct super_operations pohmelfs_sb_ops = {
- .alloc_inode = pohmelfs_alloc_inode,
- .destroy_inode = pohmelfs_destroy_inode,
- .drop_inode = pohmelfs_drop_inode,
- .write_inode = pohmelfs_write_inode,
- .put_super = pohmelfs_put_super,
- .remount_fs = pohmelfs_remount,
- .statfs = pohmelfs_statfs,
- .show_options = pohmelfs_show_options,
-};
-
enum {
pohmelfs_opt_idx,
+ pohmelfs_opt_crypto_thread_num,
+ pohmelfs_opt_trans_max_pages,
+ pohmelfs_opt_crypto_fail_unsupported,
+
+ /* Remountable options */
pohmelfs_opt_trans_scan_timeout,
pohmelfs_opt_drop_scan_timeout,
pohmelfs_opt_wait_on_page_timeout,
pohmelfs_opt_trans_retries,
- pohmelfs_opt_crypto_thread_num,
- pohmelfs_opt_trans_max_pages,
- pohmelfs_opt_crypto_fail_unsupported,
pohmelfs_opt_mcache_timeout,
};
static struct match_token pohmelfs_tokens[] = {
{pohmelfs_opt_idx, "idx=%u"},
+ {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
+ {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
+ {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
{pohmelfs_opt_trans_scan_timeout, "trans_scan_timeout=%u"},
{pohmelfs_opt_drop_scan_timeout, "drop_scan_timeout=%u"},
{pohmelfs_opt_wait_on_page_timeout, "wait_on_page_timeout=%u"},
{pohmelfs_opt_trans_retries, "trans_retries=%u"},
- {pohmelfs_opt_crypto_thread_num, "crypto_thread_num=%u"},
- {pohmelfs_opt_trans_max_pages, "trans_max_pages=%u"},
- {pohmelfs_opt_crypto_fail_unsupported, "crypto_fail_unsupported"},
{pohmelfs_opt_mcache_timeout, "mcache_timeout=%u"},
};
-static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb)
+static int pohmelfs_parse_options(char *options, struct pohmelfs_sb *psb, int remount)
{
char *p;
substring_t args[MAX_OPT_ARGS];
if (err)
return err;
+ if (remount && token <= pohmelfs_opt_crypto_fail_unsupported)
+ continue;
+
switch (token) {
case pohmelfs_opt_idx:
psb->idx = option;
return 0;
}
+static int pohmelfs_remount(struct super_block *sb, int *flags, char *data)
+{
+ int err;
+ struct pohmelfs_sb *psb = POHMELFS_SB(sb);
+ unsigned long old_sb_flags = sb->s_flags;
+
+ err = pohmelfs_parse_options(data, psb, 1);
+ if (err)
+ goto err_out_restore;
+
+ if (!(*flags & MS_RDONLY))
+ sb->s_flags &= ~MS_RDONLY;
+ return 0;
+
+err_out_restore:
+ sb->s_flags = old_sb_flags;
+ return err;
+}
+
static void pohmelfs_flush_inode(struct pohmelfs_inode *pi, unsigned int count)
{
struct inode *inode = &pi->vfs_inode;
return err;
}
+static int pohmelfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
+{
+ struct netfs_state *st;
+ struct pohmelfs_ctl *ctl;
+ struct pohmelfs_sb *psb = POHMELFS_SB(mnt->mnt_sb);
+ struct pohmelfs_config *c;
+
+ mutex_lock(&psb->state_lock);
+
+ seq_printf(m, "\nidx addr(:port) socket_type protocol active priority permissions\n");
+
+ list_for_each_entry(c, &psb->state_list, config_entry) {
+ st = &c->state;
+ ctl = &st->ctl;
+
+ seq_printf(m, "%u ", ctl->idx);
+ if (ctl->addr.sa_family == AF_INET) {
+ struct sockaddr_in *sin = (struct sockaddr_in *)&st->ctl.addr;
+ //seq_printf(m, "%pi4:%u", &sin->sin_addr.s_addr, ntohs(sin->sin_port));
+ seq_printf(m, "%u.%u.%u.%u:%u", NIPQUAD(sin->sin_addr.s_addr), ntohs(sin->sin_port));
+ } else if (ctl->addr.sa_family == AF_INET6) {
+ struct sockaddr_in6 *sin = (struct sockaddr_in6 *)&st->ctl.addr;
+ seq_printf(m, "%pi6:%u", &sin->sin6_addr, ntohs(sin->sin6_port));
+ } else {
+ unsigned int i;
+ for (i=0; i<ctl->addrlen; ++i)
+ seq_printf(m, "%02x.", ctl->addr.addr[i]);
+ }
+
+ seq_printf(m, " %u %u %d %u %x\n",
+ ctl->type, ctl->proto,
+ st->socket != NULL,
+ ctl->prio, ctl->perm);
+ }
+ mutex_unlock(&psb->state_lock);
+
+ return 0;
+}
+
+static const struct super_operations pohmelfs_sb_ops = {
+ .alloc_inode = pohmelfs_alloc_inode,
+ .destroy_inode = pohmelfs_destroy_inode,
+ .drop_inode = pohmelfs_drop_inode,
+ .write_inode = pohmelfs_write_inode,
+ .put_super = pohmelfs_put_super,
+ .remount_fs = pohmelfs_remount,
+ .statfs = pohmelfs_statfs,
+ .show_options = pohmelfs_show_options,
+ .show_stats = pohmelfs_show_stats,
+};
+
/*
* Allocate private superblock and create root dir.
*/
struct pohmelfs_inode *npi;
struct qstr str;
- pohmelfs_ftrans_init();
-
psb = kzalloc(sizeof(struct pohmelfs_sb), GFP_KERNEL);
if (!psb)
goto err_out_exit;
mutex_init(&psb->state_lock);
INIT_LIST_HEAD(&psb->state_list);
- err = pohmelfs_parse_options((char *) data, psb);
+ err = pohmelfs_parse_options((char *) data, psb, 0);
if (err)
goto err_out_free_sb;
err = PTR_ERR(npi);
goto err_out_crypto_exit;
}
+ set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
+ clear_bit(NETFS_INODE_OWNED, &npi->state);
root = &npi->vfs_inode;
mnt);
}
+/*
+ * We need this to sync all inodes earlier, since when writeback
+ * is invoked from the umount/mntput path dcache is already shrunk,
+ * see generic_shutdown_super(), and no inodes can access the path.
+ */
+static void pohmelfs_kill_super(struct super_block *sb)
+{
+ struct writeback_control wbc = {
+ .sync_mode = WB_SYNC_ALL,
+ .range_start = 0,
+ .range_end = LLONG_MAX,
+ .nr_to_write = LONG_MAX,
+ };
+ generic_sync_sb_inodes(sb, &wbc);
+
+ kill_anon_super(sb);
+}
+
static struct file_system_type pohmel_fs_type = {
.owner = THIS_MODULE,
.name = "pohmel",
.get_sb = pohmelfs_get_sb,
- .kill_sb = kill_anon_super,
+ .kill_sb = pohmelfs_kill_super,
};
/*
path_len = err;
err = -ENOMEM;
- t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize, 0, 0);
+ t = netfs_trans_alloc(psb, path_len + sizeof(struct netfs_lock) + isize,
+ NETFS_TRANS_SINGLE_DST, 0);
if (!t)
goto err_out_exit;
#include "netfs.h"
-static int pohmelfs_ftrans_size = 10240;
-static u32 *pohmelfs_ftrans;
-
-int pohmelfs_ftrans_init(void)
-{
- pohmelfs_ftrans = vmalloc(pohmelfs_ftrans_size * 4);
- if (!pohmelfs_ftrans)
- return -ENOMEM;
-
- return 0;
-}
-
-void pohmelfs_ftrans_exit(void)
-{
- vfree(pohmelfs_ftrans);
-}
-
-void pohmelfs_ftrans_clean(u64 id)
-{
- if (pohmelfs_ftrans) {
- u32 i = id & 0xffffffff;
- int idx = i % pohmelfs_ftrans_size;
-
- pohmelfs_ftrans[idx] = 0;
- }
-}
-
-void pohmelfs_ftrans_update(u64 id)
-{
- if (pohmelfs_ftrans) {
- u32 i = id & 0xffffffff;
- int idx = i % pohmelfs_ftrans_size;
-
- pohmelfs_ftrans[idx] = i;
- }
-}
-
-int pohmelfs_ftrans_check(u64 id)
-{
- if (pohmelfs_ftrans) {
- u32 i = id & 0xffffffff;
- int idx = i % pohmelfs_ftrans_size;
-
- return (pohmelfs_ftrans[idx] == i);
- }
-
- return -1;
-}
-
/*
* Async machinery lives here.
* All commands being sent to server do _not_ require sync reply,
if (err != -EEXIST)
goto err_out_put;
} else {
+ struct dentry *dentry, *alias, *pd;
+
set_bit(NETFS_INODE_REMOTE_SYNCED, &npi->state);
clear_bit(NETFS_INODE_OWNED, &npi->state);
+
+ pd = d_find_alias(&parent->vfs_inode);
+ if (pd) {
+ str.hash = full_name_hash(str.name, str.len);
+ dentry = d_alloc(pd, &str);
+ if (dentry) {
+ alias = d_materialise_unique(dentry, &npi->vfs_inode);
+ if (alias)
+ dput(dentry);
+ }
+
+ dput(dentry);
+ dput(pd);
+ }
}
}
out:
if (dst) {
netfs_trans_remove_nolock(dst, st);
t = dst->trans;
-
- pohmelfs_ftrans_update(cmd->start);
}
mutex_unlock(&st->trans_lock);
if (!t) {
- int check = pohmelfs_ftrans_check(cmd->start);
- printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u, double: %d.\n",
- __func__, cmd->start, cmd->id, cmd->size, cmd->ext, check);
+ printk("%s: failed to find transaction: start: %llu: id: %llu, size: %u, ext: %u.\n",
+ __func__, cmd->start, cmd->id, cmd->size, cmd->ext);
err = -EINVAL;
goto out;
}
POHMELFS_FLAGS_DEL, /* Network state control message for DEL */
POHMELFS_FLAGS_SHOW, /* Network state control message for SHOW */
POHMELFS_FLAGS_CRYPTO, /* Crypto data control message */
+ POHMELFS_FLAGS_MODIFY, /* Network state modification message */
};
/*
unsigned char data[0]; /* Algorithm string, key and IV */
};
+#define POHMELFS_IO_PERM_READ (1<<0)
+#define POHMELFS_IO_PERM_WRITE (1<<1)
+
/*
* Configuration command used to create table of different remote servers.
*/
struct pohmelfs_ctl
{
- unsigned int idx; /* Config index */
- unsigned int type; /* Socket type */
- unsigned int proto; /* Socket protocol */
- unsigned int addrlen; /* Size of the address */
- unsigned short unused; /* Align structure by 4 bytes */
+ __u32 idx; /* Config index */
+ __u32 type; /* Socket type */
+ __u32 proto; /* Socket protocol */
+ __u16 addrlen; /* Size of the address */
+ __u16 perm; /* IO permission */
+ __u16 prio; /* IO priority */
struct saddr addr; /* Remote server address */
};
pohmelfs_mcache_free(psb, m);
}
-int pohmelfs_ftrans_init(void);
-void pohmelfs_ftrans_exit(void);
-void pohmelfs_ftrans_update(u64 id);
-int pohmelfs_ftrans_check(u64 id);
-void pohmelfs_ftrans_clean(u64 id);
-
#endif /* __KERNEL__*/
#endif /* __NETFS_H */
__func__, t, t->gen, t->iovec.iov_len, t->page_num, psb->active_state);
#endif
mutex_lock(&psb->state_lock);
+ list_for_each_entry(c, &psb->state_list, config_entry) {
+ st = &c->state;
- if ((t->flags & NETFS_TRANS_SINGLE_DST) && psb->active_state) {
- st = &psb->active_state->state;
-
- err = -EPIPE;
- if (netfs_state_poll(st) & POLLOUT) {
- err = netfs_trans_push_dst(t, st);
- if (!err) {
- err = netfs_trans_send(t, st);
- if (err) {
- netfs_trans_drop_last(t, st);
- } else {
- pohmelfs_switch_active(psb);
- goto out;
- }
- }
+ if (t->flags & NETFS_TRANS_SINGLE_DST) {
+ if (!(st->ctl.perm & POHMELFS_IO_PERM_READ))
+ continue;
+ } else {
+ if (!(st->ctl.perm & POHMELFS_IO_PERM_WRITE))
+ continue;
}
- pohmelfs_switch_active(psb);
- }
- list_for_each_entry(c, &psb->state_list, config_entry) {
- st = &c->state;
+ if (psb->active_state && (psb->active_state->state.ctl.prio >= st->ctl.prio))
+ st = &psb->active_state->state;
err = netfs_trans_push(t, st);
if (!err && (t->flags & NETFS_TRANS_SINGLE_DST))
break;
}
-out:
+
mutex_unlock(&psb->state_lock);
#if 0
dprintk("%s: fully sent t: %p, gen: %u, size: %u, page_num: %u, err: %d.\n",
t->gen = atomic_inc_return(&psb->trans_gen);
- pohmelfs_ftrans_clean(t->gen);
-
cmd->size = t->iovec.iov_len - sizeof(struct netfs_cmd) +
t->attached_size + t->attached_pages * sizeof(struct netfs_cmd);
cmd->cmd = NETFS_TRANS;
return (-1);
} /* End of rt28xx_open */
+static const struct net_device_ops rt2860_netdev_ops = {
+ .ndo_open = MainVirtualIF_open,
+ .ndo_stop = MainVirtualIF_close,
+ .ndo_do_ioctl = rt28xx_ioctl,
+ .ndo_get_stats = RT28xx_get_ether_stats,
+ .ndo_validate_addr = NULL,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+ .ndo_start_xmit = IKANOS_DataFramesTx,
+#else
+ .ndo_start_xmit = rt28xx_send_packets,
+#endif
+};
/* Must not be called for mdev and apdev */
static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
//ether_setup(dev);
- dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
- dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
#ifdef CONFIG_STA_SUPPORT
#if WIRELESS_EXT >= 12
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
#endif
- dev->get_stats = RT28xx_get_ether_stats;
- dev->open = MainVirtualIF_open; //rt28xx_open;
- dev->stop = MainVirtualIF_close; //rt28xx_close;
dev->priv_flags = INT_MAIN;
- dev->do_ioctl = rt28xx_ioctl;
- dev->validate_addr = NULL;
+ dev->netdev_ops = &rt2860_netdev_ops;
// find available device name
for (i = 0; i < 8; i++)
{
{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */ \
+ {USB_DEVICE(0x0DF6,0x0039)}, /* Sitecom */ \
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \
{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \
{USB_DEVICE(0x0789,0x0162)}, /* Logitec */ \
{USB_DEVICE(0x0789,0x0163)}, /* Logitec */ \
{USB_DEVICE(0x0789,0x0164)}, /* Logitec */ \
+ {USB_DEVICE(0x7392,0x7717)}, /* Edimax */ \
{ }/* Terminating entry */ \
}
return (-1);
} /* End of rt28xx_open */
+static const struct net_device_ops rt2870_netdev_ops = {
+ .ndo_open = MainVirtualIF_open,
+ .ndo_stop = MainVirtualIF_close,
+ .ndo_do_ioctl = rt28xx_ioctl,
+ .ndo_get_stats = RT28xx_get_ether_stats,
+ .ndo_validate_addr = NULL,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+ .ndo_start_xmit = IKANOS_DataFramesTx,
+#else
+ .ndo_start_xmit = rt28xx_send_packets,
+#endif
+};
/* Must not be called for mdev and apdev */
static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
//ether_setup(dev);
- dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
- dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
// dev->set_multicast_list = ieee80211_set_multicast_list;
// dev->change_mtu = ieee80211_change_mtu;
#ifdef CONFIG_STA_SUPPORT
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
#endif
- dev->get_stats = RT28xx_get_ether_stats;
- dev->open = MainVirtualIF_open; //rt28xx_open;
- dev->stop = MainVirtualIF_close; //rt28xx_close;
// dev->uninit = ieee80211_if_reinit;
// dev->destructor = ieee80211_if_free;
dev->priv_flags = INT_MAIN;
- dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
- dev->validate_addr = NULL;
-#endif
+ dev->netdev_ops = &rt2870_netdev_ops;
// find available device name
for (i = 0; i < 8; i++)
{
// OID_SET_HT_PHYMODE SetHT;
// WPDMA_GLO_CFG_STRUC GloCfg;
UINT32 MacCsr0 = 0;
- UINT32 MacValue = 0;
#ifdef RT2870
#ifdef INF_AMAZON_SE
return (-1);
} /* End of rt28xx_open */
+static const struct net_device_ops rt3070_netdev_ops = {
+ .ndo_open = MainVirtualIF_open,
+ .ndo_stop = MainVirtualIF_close,
+ .ndo_do_ioctl = rt28xx_ioctl,
+ .ndo_get_stats = RT28xx_get_ether_stats,
+ .ndo_validate_addr = NULL,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef IKANOS_VX_1X0
+ .ndo_start_xmit = IKANOS_DataFramesTx,
+#else
+ .ndo_start_xmit = rt28xx_send_packets,
+#endif
+};
/* Must not be called for mdev and apdev */
static NDIS_STATUS rt_ieee80211_if_setup(struct net_device *dev, PRTMP_ADAPTER pAd)
//ether_setup(dev);
- dev->hard_start_xmit = rt28xx_send_packets;
-
-#ifdef IKANOS_VX_1X0
- dev->hard_start_xmit = IKANOS_DataFramesTx;
-#endif // IKANOS_VX_1X0 //
-
// dev->set_multicast_list = ieee80211_set_multicast_list;
// dev->change_mtu = ieee80211_change_mtu;
#ifdef CONFIG_STA_SUPPORT
#if WIRELESS_EXT < 21
dev->get_wireless_stats = rt28xx_get_wireless_stats;
#endif
- dev->get_stats = RT28xx_get_ether_stats;
- dev->open = MainVirtualIF_open; //rt28xx_open;
- dev->stop = MainVirtualIF_close; //rt28xx_close;
// dev->uninit = ieee80211_if_reinit;
// dev->destructor = ieee80211_if_free;
dev->priv_flags = INT_MAIN;
- dev->do_ioctl = rt28xx_ioctl;
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
- dev->validate_addr = NULL;
-#endif
+ dev->netdev_ops = &rt3070_netdev_ops;
// find available device name
for (i = 0; i < 8; i++)
{
#define R8180H
-#define RTL8180_MODULE_NAME "rtl8180"
+#define RTL8180_MODULE_NAME "r8180"
#define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
#define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a)
#define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a)
{
struct proc_dir_entry *e;
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- priv->dir_dev = create_proc_entry(dev->name,
- S_IFDIR | S_IRUGO | S_IXUGO,
- rtl8180_proc);
+ priv->dir_dev = rtl8180_proc;
if (!priv->dir_dev) {
- DMESGE("Unable to initialize /proc/net/rtl8180/%s\n",
+ DMESGE("Unable to initialize /proc/net/r8180/%s\n",
dev->name);
return;
}
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-hw\n",
+ "/proc/net/r8180/%s/stats-hw\n",
dev->name);
}
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-rx\n",
+ "/proc/net/r8180/%s/stats-rx\n",
dev->name);
}
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-tx\n",
+ "/proc/net/r8180/%s/stats-tx\n",
dev->name);
}
#if 0
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/registers\n",
+ "/proc/net/r8180/%s/registers\n",
dev->name);
}
}
*tmp & (1<<15)? "ok": "err", *(tmp+4));
}
- DMESG("nic at %d",
- (nic-nicbegin) / 8 /4);
- DMESG("tail at %d", ((int)tail - (int)begin) /8 /4);
- DMESG("head at %d", ((int)head - (int)begin) /8 /4);
- DMESG("check free desc returns %d", check_nic_enought_desc(dev,pri));
- DMESG("free desc is %d\n", get_curr_tx_free_desc(dev,pri));
- //rtl8180_reset(dev);
return;
}
* descriptor's buffer must be 256 byte aligned
* we shouldn't be here, since we set DMA mask !
*/
- DMESGW("Fixing TX alignment");
- desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
- desc = (u32*)((u64)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
- desc = (u32*)((u32)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+ WARN(1, "DMA buffer is not aligned\n");
}
tmp=desc;
for (i=0;i<count;i++)
* descriptor's buffer must be 256 byte aligned
* should never happen since we specify the DMA mask
*/
-
- DMESGW("Fixing RX alignment");
- desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
- desc = (u32*)((u64)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
- desc = (u32*)((u32)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+ WARN(1, "DMA buffer is not aligned\n");
}
priv->rxring=desc;
- move firmware loading to request_firmware()
- remove direct memory access of structures
- any remaining sparse and checkpatch.pl warnings
- - any netdev recommended changes
+
+ - use net_device_ops
+ - use dev->stats rather than adapter->stats
+ - don't cast netdev_priv it is already void
+ - use compare_ether_addr
+ - GET RID OF MACROS
+ - work on all architectures
+ - without CONFIG_X86_64 confusion
+ - do 64 bit correctly
+ - don't depend on order of union
+ - get rid of ASSERT(), use BUG() instead but only where necessary
+ looks like most aren't really useful
+ - no new SIOCDEVPRIVATE ioctl allowed
+ - don't use module_param for configuring interrupt mitigation
+ use ethtool instead
+ - reorder code to elminate use of forward declarations
+ - don't keep private linked list of drivers.
+ - remove all the gratiutous debug infrastructure
+ - use PCI_DEVICE()
+ - do ethtool correctly using ethtool_ops
+ - NAPI?
+ - wasted overhead of extra stats
+ - state variables for things that are
+ easily availble and shouldn't be kept in card structure, cardnum, ...
+ slotnumber, events, ...
+ - get rid of slic_spinlock wrapper
+ - volatile == bad design => bad code
+ - locking too fine grained, not designed just throw more locks
+ at problem
+
Please send patches to:
Greg Kroah-Hartman <gregkh@suse.de>
return;
}
+static const struct net_device_ops slic_netdev_ops = {
+ .ndo_open = slic_entry_open,
+ .ndo_stop = slic_entry_halt,
+ .ndo_start_xmit = slic_xmit_start,
+ .ndo_do_ioctl = slic_ioctl,
+ .ndo_set_mac_address = slic_mac_set_address,
+ .ndo_get_stats = slic_get_stats,
+ .ndo_set_multicast_list = slic_mcast_set_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_change_mtu = eth_change_mtu,
+};
+
static int __devinit slic_entry_probe(struct pci_dev *pcidev,
const struct pci_device_id *pci_tbl_entry)
{
netdev->base_addr = (unsigned long)adapter->memorybase;
netdev->irq = adapter->irq;
- netdev->open = slic_entry_open;
- netdev->stop = slic_entry_halt;
- netdev->hard_start_xmit = slic_xmit_start;
- netdev->do_ioctl = slic_ioctl;
- netdev->set_mac_address = slic_mac_set_address;
- netdev->get_stats = slic_get_stats;
- netdev->set_multicast_list = slic_mcast_set_list;
+ netdev->netdev_ops = &slic_netdev_ops;
slic_debug_adapter_create(adapter);
}
/* Doesn't already exist. Allocate a structure to hold it */
- mcaddr = kmalloc(sizeof(struct mcast_address), GFP_KERNEL);
+ mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
if (mcaddr == NULL)
return 1;
}
if (!physcard) {
/* no structure allocated for this physical card yet */
- physcard = kzalloc(sizeof(struct physcard), GFP_KERNEL);
+ physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
ASSERT(physcard);
physcard->next = slic_global.phys_card;
config STLC45XX
tristate "stlc4550/4560 support"
- depends on MAC80211 && WLAN_80211 && SPI_MASTER
+ depends on MAC80211 && WLAN_80211 && SPI_MASTER && GENERIC_HARDIRQS
---help---
This is a driver for stlc4550 and stlc4560 chipsets.
int ret,i;
if (!adapter->intrregistered) {
+ spin_unlock_irqrestore(&sxg_global.driver_lock,
+ sxg_global.flags);
for (i=0; i<adapter->nr_msix_entries; i++) {
ret = request_irq (adapter->msi_entries[i].vector,
sxg_isr,
adapter->netdev->name,
adapter->netdev);
if (ret) {
+ spin_lock_irqsave(&sxg_global.driver_lock,
+ sxg_global.flags);
DBG_ERROR("sxg: MSI-X request_irq (%s) "
"FAILED [%x]\n", adapter->netdev->name,
ret);
}
}
}
+ spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags);
adapter->msi_enabled = TRUE;
adapter->intrregistered = 1;
adapter->IntRegistered = TRUE;
return status;
}
+static const struct net_device_ops sxg_netdev_ops = {
+ .ndo_open = sxg_entry_open,
+ .ndo_stop = sxg_entry_halt,
+ .ndo_start_xmit = sxg_send_packets,
+ .ndo_do_ioctl = sxg_ioctl,
+ .ndo_change_mtu = sxg_change_mtu,
+ .ndo_get_stats = sxg_get_stats,
+ .ndo_set_multicast_list = sxg_mcast_set_list,
+ .ndo_validate_addr = eth_validate_addr,
+#if XXXTODO
+ .ndo_set_mac_address = sxg_mac_set_address,
+#else
+ .ndo_set_mac_address = eth_mac_addr,
+#endif
+};
+
static int sxg_entry_probe(struct pci_dev *pcidev,
const struct pci_device_id *pci_tbl_entry)
{
netdev->base_addr = (unsigned long)adapter->base_addr;
netdev->irq = adapter->irq;
- netdev->open = sxg_entry_open;
- netdev->stop = sxg_entry_halt;
- netdev->hard_start_xmit = sxg_send_packets;
- netdev->do_ioctl = sxg_ioctl;
- netdev->change_mtu = sxg_change_mtu;
-#if XXXTODO
- netdev->set_mac_address = sxg_mac_set_address;
-#endif
- netdev->get_stats = sxg_get_stats;
- netdev->set_multicast_list = sxg_mcast_set_list;
+ netdev->netdev_ops = &sxg_netdev_ops;
SET_ETHTOOL_OPS(netdev, &sxg_nic_ethtool_ops);
netdev->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
err = sxg_set_interrupt_capability(adapter);
DBG_ERROR("sxg: %s EXIT\n", __func__);
spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags);
+ mod_timer(&adapter->watchdog_timer, jiffies);
+
return STATUS_SUCCESS;
}
u64 phys_addr;
unsigned long flags;
unsigned long queue_id=0;
+ int offload_cksum = 0;
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl",
pSgl, SxgSgl, 0, 0);
struct iphdr *ip;
ip = ip_hdr(skb);
- if ((ip->protocol == IPPROTO_TCP)&&(DataLength >= sizeof(
+ if (ip->protocol == IPPROTO_TCP)
+ offload_cksum = 1;
+ if (!offload_cksum || !tcp_hdr(skb))
+ queue_id = 0;
+ else if (offload_cksum && (DataLength >= sizeof(
struct tcphdr))){
queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
(ntohs (tcp_hdr(skb)->source) &
SXG_LARGE_SEND_QUEUE_MASK));
}
} else if (skb->protocol == htons(ETH_P_IPV6)) {
- if ((ipv6_hdr(skb)->nexthdr == IPPROTO_TCP) && (DataLength >=
- sizeof(struct tcphdr)) ) {
+ if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
+ offload_cksum = 1;
+ if (!offload_cksum || !tcp_hdr(skb))
+ queue_id = 0;
+ else if (offload_cksum && (DataLength>=sizeof(struct tcphdr))){
queue_id = ((ntohs(tcp_hdr(skb)->dest) == ISCSI_PORT) ?
(ntohs (tcp_hdr(skb)->source) &
SXG_LARGE_SEND_QUEUE_MASK):
}
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd",
XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0);
- /* Update stats */
- adapter->stats.tx_packets++;
- adapter->stats.tx_bytes += DataLength;
-#if XXXTODO /* Stats stuff */
- if (SXG_MULTICAST_PACKET(EtherHdr)) {
- if (SXG_BROADCAST_PACKET(EtherHdr)) {
- adapter->Stats.DumbXmtBcastPkts++;
- adapter->Stats.DumbXmtBcastBytes += DataLength;
+ memset(XmtCmd, '\0', sizeof(*XmtCmd));
+ XmtCmd->SgEntries = 1;
+ XmtCmd->Flags = 0;
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ /*
+ * We need to set the Checkum in IP header to 0. This is
+ * required by hardware.
+ */
+ if (offload_cksum) {
+ ip_hdr(skb)->check = 0x0;
+ XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
+ XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
+ /*
+ * Dont know if length will require a change in
+ * case of VLAN
+ */
+ XmtCmd->CsumFlags.MacLen = ETH_HLEN;
+ XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
+ SXG_NW_HDR_LEN_SHIFT;
} else {
- adapter->Stats.DumbXmtMcastPkts++;
- adapter->Stats.DumbXmtMcastBytes += DataLength;
+ if (skb_checksum_help(skb)){
+ printk(KERN_EMERG "Dropped UDP packet for"
+ " incorrect checksum calculation\n");
+ if (XmtCmd)
+ SXG_ABORT_CMD(XmtRingInfo);
+ spin_unlock_irqrestore(&adapter->XmtZeroLock,
+ flags);
+ return STATUS_SUCCESS;
+ }
}
- } else {
- adapter->Stats.DumbXmtUcastPkts++;
- adapter->Stats.DumbXmtUcastBytes += DataLength;
}
-#endif
+
/*
* Fill in the command
* Copy out the first SGE to the command and adjust for offset
(SXG_INVALID_SGL(phys_addr,skb->data_len)))
{
spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
+ if (XmtCmd)
+ SXG_ABORT_CMD(XmtRingInfo);
/* Silently drop this packet */
printk(KERN_EMERG"Dropped a packet for 64k boundary problem\n");
return STATUS_SUCCESS;
}
- memset(XmtCmd, '\0', sizeof(*XmtCmd));
XmtCmd->Buffer.FirstSgeAddress = phys_addr;
XmtCmd->Buffer.FirstSgeLength = DataLength;
XmtCmd->Buffer.SgeOffset = 0;
XmtCmd->Buffer.TotalLength = DataLength;
- XmtCmd->SgEntries = 1;
- XmtCmd->Flags = 0;
- if (skb->ip_summed == CHECKSUM_PARTIAL) {
- /*
- * We need to set the Checkum in IP header to 0. This is
- * required by hardware.
- */
- ip_hdr(skb)->check = 0x0;
- XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_IP;
- XmtCmd->CsumFlags.Flags |= SXG_SLOWCMD_CSUM_TCP;
- /* Dont know if length will require a change in case of VLAN */
- XmtCmd->CsumFlags.MacLen = ETH_HLEN;
- XmtCmd->CsumFlags.IpHl = skb_network_header_len(skb) >>
- SXG_NW_HDR_LEN_SHIFT;
- }
/*
* Advance transmit cmd descripter by 1.
* NOTE - See comments in SxgTcpOutput where we write
ASSERT((queue_id & ~SXG_LARGE_SEND_QUEUE_MASK) == 0);
WRITE_REG(adapter->UcodeRegs[0].XmtCmd, ((queue_id << 16) | 1), TRUE);
adapter->Stats.XmtQLen++; /* Stats within lock */
+ /* Update stats */
+ adapter->stats.tx_packets++;
+ adapter->stats.tx_bytes += DataLength;
+#if XXXTODO /* Stats stuff */
+ if (SXG_MULTICAST_PACKET(EtherHdr)) {
+ if (SXG_BROADCAST_PACKET(EtherHdr)) {
+ adapter->Stats.DumbXmtBcastPkts++;
+ adapter->Stats.DumbXmtBcastBytes += DataLength;
+ } else {
+ adapter->Stats.DumbXmtMcastPkts++;
+ adapter->Stats.DumbXmtMcastBytes += DataLength;
+ }
+ } else {
+ adapter->Stats.DumbXmtUcastPkts++;
+ adapter->Stats.DumbXmtUcastBytes += DataLength;
+ }
+#endif
+
spin_unlock_irqrestore(&adapter->XmtZeroLock, flags);
SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2",
XmtCmd, pSgl, SxgSgl, 0);
tty = tty_port_tty_get(&ATEN2011_port->port->port);
- if (tty && ATEN2011_port->open) {
+ if (tty && ATEN2011_port->open)
/* tell the tty driver that something has changed */
- wake_up_interruptible(&tty->write_wait);
- }
+ tty_wakeup(tty);
/* schedule_work(&ATEN2011_port->port->work); */
tty_kref_put(tty);
status = 0;
status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
-
- if (tty)
- tty->low_latency = 1;
/*
* Check to see if we've set up our endpoint info yet
* (can't set it up in ATEN2011_startup as the structures
cflag = tty->termios->c_cflag;
- if (!cflag) {
- dbg("%s %s", __func__, "cflag is NULL");
- return;
- }
-
- /* check that they really want us to change something */
- if (old_termios) {
- if ((cflag == old_termios->c_cflag) &&
- (RELEVANT_IFLAG(tty->termios->c_iflag) ==
- RELEVANT_IFLAG(old_termios->c_iflag))) {
- dbg("%s", "Nothing to change");
- return;
- }
- }
-
- dbg("%s - clfag %08x iflag %08x", __func__,
+ dbg("%s - cflag %08x iflag %08x", __func__,
tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
if (old_termios) {
if (err)
goto error_free_hw;
- usb_set_intfdata(intf, priv);
+ usb_set_intfdata(intf, dev);
return 0;
static void wb35_disconnect(struct usb_interface *intf)
{
- struct wbsoft_priv *priv = usb_get_intfdata(intf);
+ struct ieee80211_hw *hw = usb_get_intfdata(intf);
+ struct wbsoft_priv *priv = hw->priv;
wb35_hw_halt(priv);
+ ieee80211_stop_queues(hw);
+ ieee80211_unregister_hw(hw);
+ ieee80211_free_hw(hw);
+
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
}
return 0;
}
+static const struct net_device_ops p80211_netdev_ops = {
+ .ndo_init = p80211knetdev_init,
+ .ndo_open = p80211knetdev_open,
+ .ndo_stop = p80211knetdev_stop,
+ .ndo_get_stats = p80211knetdev_get_stats,
+ .ndo_start_xmit = p80211knetdev_hard_start_xmit,
+ .ndo_set_multicast_list = p80211knetdev_set_multicast_list,
+ .ndo_do_ioctl = p80211knetdev_do_ioctl,
+ .ndo_set_mac_address = p80211knetdev_set_mac_address,
+ .ndo_tx_timeout = p80211knetdev_tx_timeout,
+ .ndo_change_mtu = wlan_change_mtu,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
/*----------------------------------------------------------------
* wlan_setup
*
} else {
wlandev->netdev = dev;
dev->ml_priv = wlandev;
- dev->hard_start_xmit = p80211knetdev_hard_start_xmit;
- dev->get_stats = p80211knetdev_get_stats;
- dev->init = p80211knetdev_init;
- dev->open = p80211knetdev_open;
- dev->stop = p80211knetdev_stop;
+ dev->netdev_ops = &p80211_netdev_ops;
mutex_init(&wlandev->ioctl_lock);
/* block ioctls until fully initialised. Don't forget to call
module_init(hilscher_init_module);
module_exit(hilscher_exit_module);
+MODULE_DEVICE_TABLE(pci, hilscher_pci_ids);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Hans J. Koch, Benedikt Spranger");
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/
+obj-$(CONFIG_USB_WDM) += class/
+obj-$(CONFIG_USB_TMC) += class/
obj-$(CONFIG_USB_STORAGE) += storage/
obj-$(CONFIG_USB) += storage/
static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%d.%02u\n",
- value / 100, abs(value) % 100);
+ if (likely(value >= 0)) {
+ return snprintf(buf, PAGE_SIZE, "%u.%02u\n",
+ value / 100, value % 100);
+ } else {
+ value = -value;
+ return snprintf(buf, PAGE_SIZE, "-%u.%02u\n",
+ value / 100, value % 100);
+ }
}
static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
tty->driver_data = acm;
acm->tty = tty;
- /* force low_latency on so that our tty_push actually forces the data through,
- otherwise it is scheduled, and with high data rates data can get lost. */
- tty->low_latency = 1;
-
if (usb_autopm_get_interface(acm->control) < 0)
goto early_bail;
else
*
* This driver supports USB CDC WCM Device Management.
*
- * Copyright (c) 2007-2008 Oliver Neukum
+ * Copyright (c) 2007-2009 Oliver Neukum
*
* Some code taken from cdc-acm.c
*
if (!buffer)
goto out;
- while (buflen > 0) {
+ while (buflen > 2) {
if (buffer [1] != USB_DT_CS_INTERFACE) {
dev_err(&intf->dev, "skipping garbage\n");
goto next_desc;
spin_lock_init(&desc->iuspin);
init_waitqueue_head(&desc->wait);
desc->wMaxCommand = maxcom;
+ /* this will be expanded and needed in hardware endianness */
desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
desc->intf = intf;
INIT_WORK(&desc->rxwork, wdm_rxwork);
- iface = &intf->altsetting[0];
+ rv = -EINVAL;
+ iface = intf->cur_altsetting;
+ if (iface->desc.bNumEndpoints != 1)
+ goto err;
ep = &iface->endpoint[0].desc;
- if (!usb_endpoint_is_int_in(ep)) {
- rv = -EINVAL;
+ if (!ep || !usb_endpoint_is_int_in(ep))
goto err;
- }
desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
usb_set_intfdata(intf, desc);
rv = usb_register_dev(intf, &wdm_class);
- dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
- intf->minor - WDM_MINOR_BASE);
if (rv < 0)
- goto err;
+ goto err3;
+ else
+ dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
+ intf->minor - WDM_MINOR_BASE);
out:
return rv;
+err3:
+ usb_set_intfdata(intf, NULL);
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->bMaxPacketSize0,
+ desc->inbuf,
+ desc->response->transfer_dma);
err2:
usb_buffer_free(interface_to_usbdev(desc->intf),
desc->wMaxPacketSize,
if (size <= pool_max [i])
return dma_pool_alloc(hcd->pool [i], mem_flags, dma);
}
- return dma_alloc_coherent(hcd->self.controller, size, dma, 0);
+ return dma_alloc_coherent(hcd->self.controller, size, dma, mem_flags);
}
void hcd_buffer_free(
ret = checkintf(ps, ret);
if (ret)
return ret;
- usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0);
+ usb_reset_endpoint(ps->dev, ep);
return 0;
}
hcd->driver->endpoint_disable(hcd, ep);
}
+/**
+ * usb_hcd_reset_endpoint - reset host endpoint state
+ * @udev: USB device.
+ * @ep: the endpoint to reset.
+ *
+ * Resets any host endpoint state such as the toggle bit, sequence
+ * number and current window.
+ */
+void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ if (hcd->driver->endpoint_reset)
+ hcd->driver->endpoint_reset(hcd, ep);
+ else {
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+ usb_settoggle(udev, epnum, is_out, 0);
+ if (is_control)
+ usb_settoggle(udev, epnum, !is_out, 0);
+ }
+}
+
/* Protect against drivers that try to unlink URBs after the device
* is gone, by waiting until all unlinks for @udev are finished.
* Since we don't currently track URBs by device, simply wait until
void (*endpoint_disable)(struct usb_hcd *hcd,
struct usb_host_endpoint *ep);
+ /* (optional) reset any endpoint state such as sequence number
+ and current window */
+ void (*endpoint_reset)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
/* root hub support */
int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
int (*hub_control) (struct usb_hcd *hcd,
struct usb_host_endpoint *ep);
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
extern int usb_hcd_get_frame_number(struct usb_device *udev);
extern void usb_hc_died(struct usb_hcd *hcd);
extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+ ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+ ((bit) << (ep)))
+
/* -------------------------------------------------------------------------- */
/* Enumeration is only for the hub driver, or HCD virtual root hubs */
* the copy in usb-storage, for as long as we need two copies.
*/
- /* toggle was reset by the clear */
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
+ usb_reset_endpoint(dev, endp);
return 0;
}
}
}
+/**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address. Endpoint number for output,
+ * endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+ unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+ struct usb_host_endpoint *ep;
+
+ if (usb_endpoint_out(epaddr))
+ ep = dev->ep_out[epnum];
+ else
+ ep = dev->ep_in[epnum];
+ if (ep)
+ usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
/**
* usb_disable_interface -- Disable all endpoints for an interface
* @dev: the device whose interface is being disabled
usb_disable_endpoint(dev, i, true);
usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
- dev->toggle[0] = dev->toggle[1] = 0;
/* getting rid of interfaces will disconnect
* any drivers bound to them (a key side effect)
* usb_enable_endpoint - Enable an endpoint for USB communications
* @dev: the device whose interface is being enabled
* @ep: the endpoint
- * @reset_toggle: flag to set the endpoint's toggle back to 0
+ * @reset_ep: flag to reset the endpoint state
*
- * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
* For control endpoints, both the input and output sides are handled.
*/
void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
- bool reset_toggle)
+ bool reset_ep)
{
int epnum = usb_endpoint_num(&ep->desc);
int is_out = usb_endpoint_dir_out(&ep->desc);
int is_control = usb_endpoint_xfer_control(&ep->desc);
- if (is_out || is_control) {
- if (reset_toggle)
- usb_settoggle(dev, epnum, 1, 0);
+ if (reset_ep)
+ usb_hcd_reset_endpoint(dev, ep);
+ if (is_out || is_control)
dev->ep_out[epnum] = ep;
- }
- if (!is_out || is_control) {
- if (reset_toggle)
- usb_settoggle(dev, epnum, 0, 0);
+ if (!is_out || is_control)
dev->ep_in[epnum] = ep;
- }
ep->enabled = 1;
}
* usb_enable_interface - Enable all the endpoints for an interface
* @dev: the device whose interface is being enabled
* @intf: pointer to the interface descriptor
- * @reset_toggles: flag to set the endpoints' toggles back to 0
+ * @reset_eps: flag to reset the endpoints' state
*
* Enables all the endpoints for the interface's current altsetting.
*/
void usb_enable_interface(struct usb_device *dev,
- struct usb_interface *intf, bool reset_toggles)
+ struct usb_interface *intf, bool reset_eps)
{
struct usb_host_interface *alt = intf->cur_altsetting;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i)
- usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles);
+ usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
}
/**
* This issues a standard SET_CONFIGURATION request to the device using
* the current configuration. The effect is to reset most USB-related
* state in the device, including interface altsettings (reset to zero),
- * endpoint halts (cleared), and data toggle (only for bulk and interrupt
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
* endpoints). Other usbcore state is unchanged, including bindings of
* usb device drivers to interfaces.
*
* (multi-interface) devices. Instead, the driver for each interface may
* use usb_set_interface() on the interfaces it claims. Be careful though;
* some devices don't support the SET_INTERFACE request, and others won't
- * reset all the interface state (notably data toggles). Resetting the whole
+ * reset all the interface state (notably endpoint state). Resetting the whole
* configuration would affect other drivers' interfaces.
*
* The caller must own the device lock.
if (retval < 0)
return retval;
- dev->toggle[0] = dev->toggle[1] = 0;
-
/* re-init hc/hcd interface/endpoint state */
for (i = 0; i < config->desc.bNumInterfaces; i++) {
struct usb_interface *intf = config->interface[i];
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
- usb_enable_endpoint(dev, &dev->ep0, true);
+ usb_enable_endpoint(dev, &dev->ep0, false);
dev->can_submit = 1;
/* Save readable and stable topology id, distinguishing devices
* - Gadget API (majority of optional features)
* - Suspend & Remote Wakeup
*/
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/dmapool.h>
#include <linux/dma-mapping.h>
#define CAP_DEVICEADDR (0x014UL)
#define CAP_ENDPTLISTADDR (0x018UL)
#define CAP_PORTSC (0x044UL)
-#define CAP_DEVLC (0x0B4UL)
+#define CAP_DEVLC (0x084UL)
#define CAP_USBMODE (hw_bank.lpm ? 0x0C8UL : 0x068UL)
#define CAP_ENDPTSETUPSTAT (hw_bank.lpm ? 0x0D8UL : 0x06CUL)
#define CAP_ENDPTPRIME (hw_bank.lpm ? 0x0DCUL : 0x070UL)
do {
dbg_event(_usb_addr(mEp), "ENABLE", 0);
+ mEp->qh[mEp->dir].ptr->cap = 0;
+
if (mEp->type == USB_ENDPOINT_XFER_CONTROL)
mEp->qh[mEp->dir].ptr->cap |= QH_IOS;
else if (mEp->type == USB_ENDPOINT_XFER_ISOC)
static struct usb_gadget_driver fsg_driver;
static void close_backing_file(struct lun *curlun);
-static void close_all_backing_files(struct fsg_dev *fsg);
/*-------------------------------------------------------------------------*/
fsg->thread_task = NULL;
spin_unlock_irq(&fsg->lock);
- /* In case we are exiting because of a signal, unregister the
- * gadget driver and close the backing file. */
- if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags)) {
+ /* If we are exiting because of a signal, unregister the
+ * gadget driver. */
+ if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
usb_gadget_unregister_driver(&fsg_driver);
- close_all_backing_files(fsg);
- }
/* Let the unbind and cleanup routines know the thread has exited */
complete_and_exit(&fsg->thread_notifier, 0);
}
}
-static void close_all_backing_files(struct fsg_dev *fsg)
-{
- int i;
-
- for (i = 0; i < fsg->nluns; ++i)
- close_backing_file(&fsg->luns[i]);
-}
-
static ssize_t show_ro(struct device *dev, struct device_attribute *attr, char *buf)
{
if (curlun->registered) {
device_remove_file(&curlun->dev, &dev_attr_ro);
device_remove_file(&curlun->dev, &dev_attr_file);
+ close_backing_file(curlun);
device_unregister(&curlun->dev);
curlun->registered = 0;
}
out:
fsg->state = FSG_STATE_TERMINATED; // The thread is dead
fsg_unbind(gadget);
- close_all_backing_files(fsg);
complete(&fsg->thread_notifier);
return rc;
}
/* Wait for the thread to finish up */
wait_for_completion(&fsg->thread_notifier);
- close_all_backing_files(fsg);
kref_put(&fsg->ref, fsg_release);
}
module_exit(fsg_cleanup);
/*-------------------------------------------------------------------------*/
static struct platform_driver udc_driver = {
- .probe = omap_udc_probe,
.remove = __exit_p(omap_udc_remove),
.suspend = omap_udc_suspend,
.resume = omap_udc_resume,
#endif
"%s\n", driver_desc,
use_dma ? " (dma)" : "");
- return platform_driver_register(&udc_driver);
+ return platform_driver_probe(&udc_driver, omap_udc_probe);
}
module_init(udc_init);
strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
}
-static u32 eth_get_link(struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
- return dev->gadget->speed != USB_SPEED_UNKNOWN;
-}
-
/* REVISIT can also support:
* - WOL (by tracking suspends and issuing remote wakeup)
* - msglevel (implies updated messaging)
static struct ethtool_ops ops = {
.get_drvinfo = eth_get_drvinfo,
- .get_link = eth_get_link
+ .get_link = ethtool_op_get_link,
};
static void defer_kevent(struct eth_dev *dev, int flag)
uchar = (c & 0x1f) << 6;
c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
+ if ((c & 0xc0) != 0x80)
goto fail;
c &= 0x3f;
uchar |= c;
uchar = (c & 0x0f) << 12;
c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
+ if ((c & 0xc0) != 0x80)
goto fail;
c &= 0x3f;
uchar |= c << 6;
c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
+ if ((c & 0xc0) != 0x80)
goto fail;
c &= 0x3f;
uchar |= c;
* already scheduled transactions
*/
if (125 < usecs) {
- int ufs = (usecs / 125) - 1;
+ int ufs = (usecs / 125);
int i;
for (i = uframe; i < (uframe + ufs) && i < 8; i++)
if (0 < tt_usecs[i]) {
process_inactive_qtd(whc, qset, td);
}
- update |= qset_add_qtds(whc, qset);
+ if (!qset->remove)
+ update |= qset_add_qtds(whc, qset);
done:
/*
spin_lock_irqsave(&whc->lock, flags);
+ err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+ if (err < 0) {
+ spin_unlock_irqrestore(&whc->lock, flags);
+ return err;
+ }
+
qset = get_qset(whc, urb, GFP_ATOMIC);
if (qset == NULL)
err = -ENOMEM;
else
err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
if (!err) {
- usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
if (!qset->in_sw_list)
asl_qset_insert_begin(whc, qset);
- }
+ } else
+ usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
spin_unlock_irqrestore(&whc->lock, flags);
if (!err)
queue_work(whc->workqueue, &whc->async_work);
- return 0;
+ return err;
}
/**
}
}
+static void whc_endpoint_reset(struct usb_hcd *usb_hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct whc *whc = wusbhc_to_whc(wusbhc);
+ struct whc_qset *qset;
+
+ qset = ep->hcpriv;
+ if (qset) {
+ qset->remove = 1;
+
+ if (usb_endpoint_xfer_bulk(&ep->desc)
+ || usb_endpoint_xfer_control(&ep->desc))
+ queue_work(whc->workqueue, &whc->async_work);
+ else
+ queue_work(whc->workqueue, &whc->periodic_work);
+
+ qset_reset(whc, qset);
+ }
+}
+
+
static struct hc_driver whc_hc_driver = {
.description = "whci-hcd",
.product_desc = "Wireless host controller",
.urb_enqueue = whc_urb_enqueue,
.urb_dequeue = whc_urb_dequeue,
.endpoint_disable = whc_endpoint_disable,
+ .endpoint_reset = whc_endpoint_reset,
.hub_status_data = wusbhc_rh_status_data,
.hub_control = wusbhc_rh_control,
process_inactive_qtd(whc, qset, td);
}
- update |= qset_add_qtds(whc, qset);
+ if (!qset->remove)
+ update |= qset_add_qtds(whc, qset);
done:
/*
spin_lock_irqsave(&whc->lock, flags);
+ err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+ if (err < 0) {
+ spin_unlock_irqrestore(&whc->lock, flags);
+ return err;
+ }
+
qset = get_qset(whc, urb, GFP_ATOMIC);
if (qset == NULL)
err = -ENOMEM;
else
err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
if (!err) {
- usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
if (!qset->in_sw_list)
qset_insert_in_sw_list(whc, qset);
- }
+ } else
+ usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
spin_unlock_irqrestore(&whc->lock, flags);
if (!err)
queue_work(whc->workqueue, &whc->periodic_work);
- return 0;
+ return err;
}
/**
qset_delete(whc, qset);
}
-
/**
* pzl_init - initialize the periodic zone list
* @whc: the WHCI host controller
QH_INFO3_TX_RATE_53_3
| QH_INFO3_TX_PWR(0) /* 0 == max power */
);
+
+ qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
}
/**
* qset_clear - clear fields in a qset so it may be reinserted into a
- * schedule
+ * schedule.
+ *
+ * The sequence number and current window are not cleared (see
+ * qset_reset()).
*/
void qset_clear(struct whc *whc, struct whc_qset *qset)
{
qset->remove = 0;
qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
- qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start));
+ qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
qset->qh.err_count = 0;
- qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
qset->qh.scratch[0] = 0;
qset->qh.scratch[1] = 0;
qset->qh.scratch[2] = 0;
init_completion(&qset->remove_complete);
}
+/**
+ * qset_reset - reset endpoint state in a qset.
+ *
+ * Clears the sequence number and current window. This qset must not
+ * be in the ASL or PZL.
+ */
+void qset_reset(struct whc *whc, struct whc_qset *qset)
+{
+ wait_for_completion(&qset->remove_complete);
+
+ qset->qh.status &= ~QH_STATUS_SEQ_MASK;
+ qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
+}
+
/**
* get_qset - get the qset for an async endpoint
*
struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
void qset_delete(struct whc *whc, struct whc_qset *qset);
void qset_clear(struct whc *whc, struct whc_qset *qset);
+void qset_reset(struct whc *whc, struct whc_qset *qset);
int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
gfp_t mem_flags);
void qset_free_std(struct whc *whc, struct whc_std *std);
#define QH_STATUS_FLOW_CTRL (1 << 15)
#define QH_STATUS_ICUR(i) ((i) << 5)
#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7)
+#define QH_STATUS_SEQ_MASK 0x1f
/**
* usb_pipe_to_qh_type - USB core pipe type to QH transfer type
* trigger the "send a ZLP?" confusion.
*/
rndis = (maxpacket & 0x3f) == 0
+ && length > maxpacket
&& length < 0xffff
&& (length % maxpacket) != 0;
hw_ep = tx_ch->hw_ep;
- /* Peripheral role never repurposes the
- * endpoint, so immediate completion is
- * safe. Host role waits for the fifo
- * to empty (TXPKTRDY irq) before going
- * to the next queued bulk transfer.
- */
- if (is_host_active(cppi->musb)) {
-#if 0
- /* WORKAROUND because we may
- * not always get TXKPTRDY ...
- */
- int csr;
-
- csr = musb_readw(hw_ep->regs,
- MUSB_TXCSR);
- if (csr & MUSB_TXCSR_TXPKTRDY)
-#endif
- completed = false;
- }
- if (completed)
- musb_dma_completion(musb, index + 1, 1);
+ musb_dma_completion(musb, index + 1, 1);
} else {
/* Bigger transfer than we could fit in
return 0;
}
-static int musb_resume(struct platform_device *pdev)
+static int musb_resume_early(struct platform_device *pdev)
{
- unsigned long flags;
struct musb *musb = dev_to_musb(&pdev->dev);
if (!musb->clock)
return 0;
- spin_lock_irqsave(&musb->lock, flags);
-
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
else
clk_enable(musb->clock);
/* for static cmos like DaVinci, register values were preserved
- * unless for some reason the whole soc powered down and we're
- * not treating that as a whole-system restart (e.g. swsusp)
+ * unless for some reason the whole soc powered down or the USB
+ * module got reset through the PSC (vs just being disabled).
*/
- spin_unlock_irqrestore(&musb->lock, flags);
return 0;
}
#else
#define musb_suspend NULL
-#define musb_resume NULL
+#define musb_resume_early NULL
#endif
static struct platform_driver musb_driver = {
.remove = __devexit_p(musb_remove),
.shutdown = musb_shutdown,
.suspend = musb_suspend,
- .resume = musb_resume,
+ .resume_early = musb_resume_early,
};
/*-------------------------------------------------------------------------*/
if (is_dma_capable() && ep->dma) {
struct dma_controller *c = ep->musb->dma_controller;
int value;
+
if (ep->is_in) {
+ /*
+ * The programming guide says that we must not clear
+ * the DMAMODE bit before DMAENAB, so we only
+ * clear it in the second write...
+ */
musb_writew(epio, MUSB_TXCSR,
- 0 | MUSB_TXCSR_FLUSHFIFO);
+ MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
musb_writew(epio, MUSB_TXCSR,
0 | MUSB_TXCSR_FLUSHFIFO);
} else {
| IN token(s) are recd from Host.
| -> DMA interrupt on completion
| calls TxAvail.
- | -> stop DMA, ~DmaEenab,
+ | -> stop DMA, ~DMAENAB,
| -> set TxPktRdy for last short pkt or zlp
| -> Complete Request
| -> Continue next request (call txstate)
request->dma, request_size);
if (use_dma) {
if (musb_ep->dma->desired_mode == 0) {
- /* ASSERT: DMAENAB is clear */
- csr &= ~(MUSB_TXCSR_AUTOSET |
- MUSB_TXCSR_DMAMODE);
+ /*
+ * We must not clear the DMAMODE bit
+ * before the DMAENAB bit -- and the
+ * latter doesn't always get cleared
+ * before we get here...
+ */
+ csr &= ~(MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAENAB);
+ musb_writew(epio, MUSB_TXCSR, csr
+ | MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~MUSB_TXCSR_DMAMODE;
csr |= (MUSB_TXCSR_DMAENAB |
MUSB_TXCSR_MODE);
/* against programming guide */
#elif defined(CONFIG_USB_TI_CPPI_DMA)
/* program endpoint CSR first, then setup DMA */
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_P_UNDERRUN
- | MUSB_TXCSR_TXPKTRDY);
+ csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
musb_writew(epio, MUSB_TXCSR,
(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
if (!use_dma) {
c->channel_release(musb_ep->dma);
musb_ep->dma = NULL;
- /* ASSERT: DMAENAB clear */
- csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+ csr &= ~MUSB_TXCSR_DMAENAB;
+ musb_writew(epio, MUSB_TXCSR, csr);
/* invariant: prequest->buf is non-null */
}
#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int nOut,
- u8 *buf, u32 len);
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len);
/*
* Clear TX fifo. Needed to avoid BABBLE errors.
}
}
+static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
+{
+ void __iomem *epio = ep->regs;
+ u16 csr;
+ int retries = 5;
+
+ /* scrub any data left in the fifo */
+ do {
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
+ break;
+ musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
+ csr = musb_readw(epio, MUSB_TXCSR);
+ udelay(10);
+ } while (--retries);
+
+ WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
+ ep->epnum, csr);
+
+ /* and reset for the next transfer */
+ musb_writew(epio, MUSB_TXCSR, 0);
+}
+
/*
* Start transmit. Caller is responsible for locking shared resources.
* musb must be locked.
}
-static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
{
u16 txcsr;
/* NOTE: no locks here; caller should lock and select EP */
txcsr = musb_readw(ep->regs, MUSB_TXCSR);
txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+ if (is_cppi_enabled())
+ txcsr |= MUSB_TXCSR_DMAMODE;
musb_writew(ep->regs, MUSB_TXCSR, txcsr);
}
{
u16 frame;
u32 len;
- void *buf;
void __iomem *mbase = musb->mregs;
struct urb *urb = next_urb(qh);
+ void *buf = urb->transfer_buffer;
+ u32 offset = 0;
struct musb_hw_ep *hw_ep = qh->hw_ep;
unsigned pipe = urb->pipe;
u8 address = usb_pipedevice(pipe);
case USB_ENDPOINT_XFER_ISOC:
qh->iso_idx = 0;
qh->frame = 0;
- buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+ offset = urb->iso_frame_desc[0].offset;
len = urb->iso_frame_desc[0].length;
break;
default: /* bulk, interrupt */
case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
default: s = "-intr"; break;
}; s; }),
- epnum, buf, len);
+ epnum, buf + offset, len);
/* Configure endpoint */
if (is_in || hw_ep->is_shared_fifo)
hw_ep->in_qh = qh;
else
hw_ep->out_qh = qh;
- musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+ musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
/* transmit may have more work: start it when it is time */
if (is_in)
case USB_ENDPOINT_XFER_ISOC:
case USB_ENDPOINT_XFER_INT:
DBG(3, "check whether there's still time for periodic Tx\n");
- qh->iso_idx = 0;
frame = musb_readw(mbase, MUSB_FRAME);
/* FIXME this doesn't implement that scheduling policy ...
* or handle framecounter wrapping
if (!hw_ep->tx_channel)
musb_h_tx_start(hw_ep);
else if (is_cppi_enabled() || tusb_dma_omap())
- cppi_host_txdma_start(hw_ep);
+ musb_h_tx_dma_start(hw_ep);
}
}
csr = musb_readw(ep->regs, MUSB_TXCSR);
if (csr & MUSB_TXCSR_MODE) {
musb_h_tx_flush_fifo(ep);
+ csr = musb_readw(ep->regs, MUSB_TXCSR);
musb_writew(ep->regs, MUSB_TXCSR,
- MUSB_TXCSR_FRCDATATOG);
+ csr | MUSB_TXCSR_FRCDATATOG);
}
- /* clear mode (and everything else) to enable Rx */
+
+ /*
+ * Clear the MODE bit (and everything else) to enable Rx.
+ * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
+ */
+ if (csr & MUSB_TXCSR_DMAMODE)
+ musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
musb_writew(ep->regs, MUSB_TXCSR, 0);
/* scrub all previous state, clearing toggle */
ep->rx_reinit = 0;
}
+static bool musb_tx_dma_program(struct dma_controller *dma,
+ struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+ struct urb *urb, u32 offset, u32 length)
+{
+ struct dma_channel *channel = hw_ep->tx_channel;
+ void __iomem *epio = hw_ep->regs;
+ u16 pkt_size = qh->maxpacket;
+ u16 csr;
+ u8 mode;
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+ if (length > channel->max_len)
+ length = channel->max_len;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (length > pkt_size) {
+ mode = 1;
+ csr |= MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAMODE
+ | MUSB_TXCSR_DMAENAB;
+ } else {
+ mode = 0;
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+ csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+ }
+ channel->desired_mode = mode;
+ musb_writew(epio, MUSB_TXCSR, csr);
+#else
+ if (!is_cppi_enabled() && !tusb_dma_omap())
+ return false;
+
+ channel->actual_len = 0;
+
+ /*
+ * TX uses "RNDIS" mode automatically but needs help
+ * to identify the zero-length-final-packet case.
+ */
+ mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+#endif
+
+ qh->segsize = length;
+
+ if (!dma->channel_program(channel, pkt_size, mode,
+ urb->transfer_dma + offset, length)) {
+ dma->channel_release(channel);
+ hw_ep->tx_channel = NULL;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+ musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+ return false;
+ }
+ return true;
+}
/*
* Program an HDRC endpoint as per the given URB
* Context: irqs blocked, controller lock held
*/
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int is_out,
- u8 *buf, u32 len)
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len)
{
struct dma_controller *dma_controller;
struct dma_channel *dma_channel;
/* general endpoint setup */
if (epnum) {
- /* ASSERT: TXCSR_DMAENAB was already cleared */
-
/* flush all old state, set default */
musb_h_tx_flush_fifo(hw_ep);
+
+ /*
+ * We must not clear the DMAMODE bit before or in
+ * the same cycle with the DMAENAB bit, so we clear
+ * the latter first...
+ */
csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
- | MUSB_TXCSR_DMAMODE
+ | MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_FRCDATATOG
| MUSB_TXCSR_H_RXSTALL
| MUSB_TXCSR_H_ERROR
);
csr |= MUSB_TXCSR_MODE;
- if (usb_gettoggle(urb->dev,
- qh->epnum, 1))
+ if (usb_gettoggle(urb->dev, qh->epnum, 1))
csr |= MUSB_TXCSR_H_WR_DATATOGGLE
| MUSB_TXCSR_H_DATATOGGLE;
else
csr |= MUSB_TXCSR_CLRDATATOG;
- /* twice in case of double packet buffering */
musb_writew(epio, MUSB_TXCSR, csr);
/* REVISIT may need to clear FLUSHFIFO ... */
+ csr &= ~MUSB_TXCSR_DMAMODE;
musb_writew(epio, MUSB_TXCSR, csr);
csr = musb_readw(epio, MUSB_TXCSR);
} else {
/* endpoint 0: just flush */
- musb_writew(epio, MUSB_CSR0,
- csr | MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0,
- csr | MUSB_CSR0_FLUSHFIFO);
+ musb_h_ep0_flush_fifo(hw_ep);
}
/* target addr and (for multipoint) hub addr/port */
else
load_count = min((u32) packet_sz, len);
-#ifdef CONFIG_USB_INVENTRA_DMA
- if (dma_channel) {
-
- /* clear previous state */
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB);
- csr |= MUSB_TXCSR_MODE;
- musb_writew(epio, MUSB_TXCSR,
- csr | MUSB_TXCSR_MODE);
-
- qh->segsize = min(len, dma_channel->max_len);
-
- if (qh->segsize <= packet_sz)
- dma_channel->desired_mode = 0;
- else
- dma_channel->desired_mode = 1;
-
-
- if (dma_channel->desired_mode == 0) {
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE);
- csr |= (MUSB_TXCSR_DMAENAB);
- /* against programming guide */
- } else
- csr |= (MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_DMAMODE);
-
- musb_writew(epio, MUSB_TXCSR, csr);
-
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- dma_channel->desired_mode,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- if (is_out)
- hw_ep->tx_channel = NULL;
- else
- hw_ep->rx_channel = NULL;
- dma_channel = NULL;
- }
- }
-#endif
-
- /* candidate for DMA */
- if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
-
- /* program endpoint CSRs first, then setup DMA.
- * assume CPPI setup succeeds.
- * defer enabling dma.
- */
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB);
- csr |= MUSB_TXCSR_MODE;
- musb_writew(epio, MUSB_TXCSR,
- csr | MUSB_TXCSR_MODE);
-
- dma_channel->actual_len = 0L;
- qh->segsize = len;
-
- /* TX uses "rndis" mode automatically, but needs help
- * to identify the zero-length-final-packet case.
- */
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- (urb->transfer_flags
- & URB_ZERO_PACKET)
- == URB_ZERO_PACKET,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- hw_ep->tx_channel = NULL;
- dma_channel = NULL;
-
- /* REVISIT there's an error path here that
- * needs handling: can't do dma, but
- * there's no pio buffer address...
- */
- }
- }
+ if (dma_channel && musb_tx_dma_program(dma_controller,
+ hw_ep, qh, urb, offset, len))
+ load_count = 0;
if (load_count) {
- /* ASSERT: TXCSR_DMAENAB was already cleared */
-
/* PIO to load FIFO */
qh->segsize = load_count;
musb_write_fifo(hw_ep, load_count, buf);
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_AUTOSET);
- /* write CSR */
- csr |= MUSB_TXCSR_MODE;
-
- if (epnum)
- musb_writew(epio, MUSB_TXCSR, csr);
}
/* re-enable interrupt */
dma_channel, packet_sz,
!(urb->transfer_flags
& URB_SHORT_NOT_OK),
- urb->transfer_dma,
+ urb->transfer_dma + offset,
qh->segsize);
if (!dma_ok) {
dma_controller->channel_release(
csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
musb_writew(epio, MUSB_CSR0, csr);
} else {
- csr |= MUSB_CSR0_FLUSHFIFO;
- musb_writew(epio, MUSB_CSR0, csr);
- musb_writew(epio, MUSB_CSR0, csr);
- csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
- musb_writew(epio, MUSB_CSR0, csr);
+ musb_h_ep0_flush_fifo(hw_ep);
}
musb_writeb(epio, MUSB_NAKLIMIT0, 0);
* SHOULD NEVER HAPPEN! */
ERR("no URB for end 0\n");
- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0, 0);
-
+ musb_h_ep0_flush_fifo(hw_ep);
goto done;
}
int pipe;
bool done = false;
u16 tx_csr;
- size_t wLength = 0;
- u8 *buf = NULL;
+ size_t length = 0;
+ size_t offset = 0;
struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
/* with CPPI, DMA sometimes triggers "extra" irqs */
if (!urb) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
+ return;
}
pipe = urb->pipe;
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS
| MUSB_TXCSR_TXPKTRDY);
- goto finish;
+ return;
}
if (status) {
/* second cppi case */
if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
+ return;
+ }
+
+ if (is_dma_capable() && dma && !status) {
+ /*
+ * DMA has completed. But if we're using DMA mode 1 (multi
+ * packet DMA), we need a terminal TXPKTRDY interrupt before
+ * we can consider this transfer completed, lest we trash
+ * its last packet when writing the next URB's data. So we
+ * switch back to mode 0 to get that interrupt; we'll come
+ * back here once it happens.
+ */
+ if (tx_csr & MUSB_TXCSR_DMAMODE) {
+ /*
+ * We shouldn't clear DMAMODE with DMAENAB set; so
+ * clear them in a safe order. That should be OK
+ * once TXPKTRDY has been set (and I've never seen
+ * it being 0 at this moment -- DMA interrupt latency
+ * is significant) but if it hasn't been then we have
+ * no choice but to stop being polite and ignore the
+ * programmer's guide... :-)
+ *
+ * Note that we must write TXCSR with TXPKTRDY cleared
+ * in order not to re-trigger the packet send (this bit
+ * can't be cleared by CPU), and there's another caveat:
+ * TXPKTRDY may be set shortly and then cleared in the
+ * double-buffered FIFO mode, so we do an extra TXCSR
+ * read for debouncing...
+ */
+ tx_csr &= musb_readw(epio, MUSB_TXCSR);
+ if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
+ tx_csr &= ~(MUSB_TXCSR_DMAENAB |
+ MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR,
+ tx_csr | MUSB_TXCSR_H_WZC_BITS);
+ }
+ tx_csr &= ~(MUSB_TXCSR_DMAMODE |
+ MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR,
+ tx_csr | MUSB_TXCSR_H_WZC_BITS);
+
+ /*
+ * There is no guarantee that we'll get an interrupt
+ * after clearing DMAMODE as we might have done this
+ * too late (after TXPKTRDY was cleared by controller).
+ * Re-read TXCSR as we have spoiled its previous value.
+ */
+ tx_csr = musb_readw(epio, MUSB_TXCSR);
+ }
+ /*
+ * We may get here from a DMA completion or TXPKTRDY interrupt.
+ * In any case, we must check the FIFO status here and bail out
+ * only if the FIFO still has data -- that should prevent the
+ * "missed" TXPKTRDY interrupts and deal with double-buffered
+ * FIFO mode too...
+ */
+ if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
+ DBG(2, "DMA complete but packet still in FIFO, "
+ "CSR %04x\n", tx_csr);
+ return;
+ }
}
- /* REVISIT this looks wrong... */
if (!status || dma || usb_pipeisoc(pipe)) {
if (dma)
- wLength = dma->actual_len;
+ length = dma->actual_len;
else
- wLength = qh->segsize;
- qh->offset += wLength;
+ length = qh->segsize;
+ qh->offset += length;
if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
d = urb->iso_frame_desc + qh->iso_idx;
- d->actual_length = qh->segsize;
+ d->actual_length = length;
+ d->status = status;
if (++qh->iso_idx >= urb->number_of_packets) {
done = true;
} else {
d++;
- buf = urb->transfer_buffer + d->offset;
- wLength = d->length;
+ offset = d->offset;
+ length = d->length;
}
} else if (dma) {
done = true;
& URB_ZERO_PACKET))
done = true;
if (!done) {
- buf = urb->transfer_buffer
- + qh->offset;
- wLength = urb->transfer_buffer_length
- - qh->offset;
+ offset = qh->offset;
+ length = urb->transfer_buffer_length - offset;
}
}
}
urb->status = status;
urb->actual_length = qh->offset;
musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+ return;
+ } else if (usb_pipeisoc(pipe) && dma) {
+ if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+ offset, length))
+ return;
+ } else if (tx_csr & MUSB_TXCSR_DMAENAB) {
+ DBG(1, "not complete, but DMA enabled?\n");
+ return;
+ }
- } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
- /* WARN_ON(!buf); */
-
- /* REVISIT: some docs say that when hw_ep->tx_double_buffered,
- * (and presumably, fifo is not half-full) we should write TWO
- * packets before updating TXCSR ... other docs disagree ...
- */
- /* PIO: start next packet in this URB */
- if (wLength > qh->maxpacket)
- wLength = qh->maxpacket;
- musb_write_fifo(hw_ep, wLength, buf);
- qh->segsize = wLength;
-
- musb_ep_select(mbase, epnum);
- musb_writew(epio, MUSB_TXCSR,
- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
- } else
- DBG(1, "not complete, but dma enabled?\n");
+ /*
+ * PIO: start next packet in this URB.
+ *
+ * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+ * (and presumably, FIFO is not half-full) we should write *two*
+ * packets before updating TXCSR; other docs disagree...
+ */
+ if (length > qh->maxpacket)
+ length = qh->maxpacket;
+ musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+ qh->segsize = length;
-finish:
- return;
+ musb_ep_select(mbase, epnum);
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
}
unsigned long flags;
struct musb *musb = hcd_to_musb(hcd);
struct usb_host_endpoint *hep = urb->ep;
- struct musb_qh *qh = hep->hcpriv;
+ struct musb_qh *qh;
struct usb_endpoint_descriptor *epd = &hep->desc;
int ret;
unsigned type_reg;
spin_lock_irqsave(&musb->lock, flags);
ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ qh = ret ? NULL : hep->hcpriv;
+ if (qh)
+ urb->hcpriv = qh;
spin_unlock_irqrestore(&musb->lock, flags);
- if (ret)
- return ret;
/* DMA mapping was already done, if needed, and this urb is on
- * hep->urb_list ... so there's little to do unless hep wasn't
- * yet scheduled onto a live qh.
+ * hep->urb_list now ... so we're done, unless hep wasn't yet
+ * scheduled onto a live qh.
*
* REVISIT best to keep hep->hcpriv valid until the endpoint gets
* disabled, testing for empty qh->ring and avoiding qh setup costs
* except for the first urb queued after a config change.
*/
- if (qh) {
- urb->hcpriv = qh;
- return 0;
- }
+ if (qh || ret)
+ return ret;
/* Allocate and initialize qh, minimizing the work done each time
* hw_ep gets reprogrammed, or with irqs blocked. Then schedule it.
* endpoint's irq status here to avoid bogus irqs.
* clearing that status is platform-specific...
*/
- } else {
+ } else if (ep->epnum) {
musb_h_tx_flush_fifo(ep);
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~(MUSB_TXCSR_AUTOSET
musb_writew(epio, MUSB_TXCSR, csr);
/* flush cpu writebuffer */
csr = musb_readw(epio, MUSB_TXCSR);
+ } else {
+ musb_h_ep0_flush_fifo(ep);
}
if (status == 0)
musb_advance_schedule(ep->musb, urb, ep, is_in);
void __iomem *mbase = musb_channel->controller->base;
u8 bchannel = musb_channel->idx;
+ int offset;
u16 csr;
if (channel->status == MUSB_DMA_STATUS_BUSY) {
if (musb_channel->transmit) {
-
- csr = musb_readw(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum,
- MUSB_TXCSR));
- csr &= ~(MUSB_TXCSR_AUTOSET |
- MUSB_TXCSR_DMAENAB |
- MUSB_TXCSR_DMAMODE);
- musb_writew(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR),
- csr);
+ offset = MUSB_EP_OFFSET(musb_channel->epnum,
+ MUSB_TXCSR);
+
+ /*
+ * The programming guide says that we must clear
+ * the DMAENAB bit before the DMAMODE bit...
+ */
+ csr = musb_readw(mbase, offset);
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+ musb_writew(mbase, offset, csr);
+ csr &= ~MUSB_TXCSR_DMAMODE;
+ musb_writew(mbase, offset, csr);
} else {
- csr = musb_readw(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum,
- MUSB_RXCSR));
+ offset = MUSB_EP_OFFSET(musb_channel->epnum,
+ MUSB_RXCSR);
+
+ csr = musb_readw(mbase, offset);
csr &= ~(MUSB_RXCSR_AUTOCLEAR |
MUSB_RXCSR_DMAENAB |
MUSB_RXCSR_DMAMODE);
- musb_writew(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR),
- csr);
+ musb_writew(mbase, offset, csr);
}
musb_writew(mbase,
&& ((channel->desired_mode == 0)
|| (channel->actual_len &
(musb_channel->max_packet_sz - 1)))
- ) {
+ ) {
+ u8 epnum = musb_channel->epnum;
+ int offset = MUSB_EP_OFFSET(epnum,
+ MUSB_TXCSR);
+ u16 txcsr;
+
+ /*
+ * The programming guide says that we
+ * must clear DMAENAB before DMAMODE.
+ */
+ musb_ep_select(mbase, epnum);
+ txcsr = musb_readw(mbase, offset);
+ txcsr &= ~(MUSB_TXCSR_DMAENAB
+ | MUSB_TXCSR_AUTOSET);
+ musb_writew(mbase, offset, txcsr);
/* Send out the packet */
- musb_ep_select(mbase,
- musb_channel->epnum);
- musb_writew(mbase, MUSB_EP_OFFSET(
- musb_channel->epnum,
- MUSB_TXCSR),
- MUSB_TXCSR_TXPKTRDY);
- } else {
- musb_dma_completion(
- musb,
- musb_channel->epnum,
- musb_channel->transmit);
+ txcsr &= ~MUSB_TXCSR_DMAMODE;
+ txcsr |= MUSB_TXCSR_TXPKTRDY;
+ musb_writew(mbase, offset, txcsr);
}
+ musb_dma_completion(musb, musb_channel->epnum,
+ musb_channel->transmit);
}
}
}
* Some code has been taken from tusb6010.c
* Copyrights for that are attributable to:
* Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This file is part of the Inventra Controller Driver for Linux.
* TUSB6010 USB 2.0 OTG Dual Role controller
*
* Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* Definitions for TUSB6010 USB 2.0 OTG Dual Role controller
*
* Copyright (C) 2006 Nokia Corporation
- * Jarkko Nikula <jarkko.nikula@nokia.com>
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
struct device *dev;
};
-static u64 nop_xceiv_dmamask = DMA_32BIT_MASK;
+static u64 nop_xceiv_dmamask = DMA_BIT_MASK(32);
static struct platform_device nop_xceiv_device = {
.name = "nop_usb_xceiv",
.id = -1,
.dev = {
.dma_mask = &nop_xceiv_dmamask,
- .coherent_dma_mask = DMA_32BIT_MASK,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = NULL,
},
};
*/
void otg_put_transceiver(struct otg_transceiver *x)
{
- put_device(x->dev);
+ if (x)
+ put_device(x->dev);
}
EXPORT_SYMBOL(otg_put_transceiver);
dbg("%s - usb_clear_halt", __func__);
usb_clear_halt(port->serial->dev, port->write_urb->pipe);
- /* force low_latency on so that our tty_push actually forces
- * the data through, otherwise it is scheduled, and with high
- * data rates (like with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
priv = usb_get_serial_port_data(port);
spin_lock_irqsave(&priv->lock, flags);
priv->rdtodo = 0;
priv->rx_flags = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /* setting to zero could cause data loss */
- if (tty)
- tty->low_latency = 1;
-
/* raise both lines and set termios */
spin_lock_irqsave(&priv->lock, flags);
priv->line_control = CONTROL_DTR | CONTROL_RTS;
termios->c_cflag
|= CS8; /* character size 8 bits */
- /*
- * Force low_latency on; otherwise the pushes are scheduled;
- * this is bad as it opens up the possibility of dropping bytes
- * on the floor. We don't want to drop bytes on the floor. :)
- */
- tty->low_latency = 1;
tty_encode_baud_rate(tty, 115200, 115200);
}
static __u16 product;
struct ftdi_private {
+ struct kref kref;
ftdi_chip_type_t chip_type;
/* type of device, either SIO or FT8U232AM */
int baud_base; /* baud base clock for divisor setting */
{ USB_DEVICE(DE_VID, WHT_PID) },
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
+ { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
return -ENOMEM;
}
+ kref_init(&priv->kref);
spin_lock_init(&priv->rx_lock);
spin_lock_init(&priv->tx_lock);
init_waitqueue_head(&priv->delta_msr_wait);
dbg("%s", __func__);
}
+static void ftdi_sio_priv_release(struct kref *k)
+{
+ struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
+
+ kfree(priv);
+}
+
static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
if (priv) {
usb_set_serial_port_data(port, NULL);
- kfree(priv);
+ kref_put(&priv->kref, ftdi_sio_priv_release);
}
return 0;
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
__func__, result);
-
+ else
+ kref_get(&priv->kref);
return result;
} /* ftdi_open */
mutex_unlock(&port->serial->disc_mutex);
/* cancel any scheduled reading */
- cancel_delayed_work(&priv->rx_work);
- flush_scheduled_work();
+ cancel_delayed_work_sync(&priv->rx_work);
/* shutdown our bulk read */
usb_kill_urb(port->read_urb);
+ kref_put(&priv->kref, ftdi_sio_priv_release);
} /* ftdi_close */
#define ADI_VID 0x0456
#define ADI_GNICE_PID 0xF000
+/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID 0x0c6c
+#define JETI_SPC1201_PID 0x04b2
+
+/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID 0x9e88
+#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+
/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
dbg("%s - port %d", __func__, port->number);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
spin_lock_irqsave(&garmin_data_p->lock, flags);
garmin_data_p->mode = initial_mode;
garmin_data_p->count = 0;
dbg("%s - port %d", __func__, port->number);
- /* force low_latency on so that our tty_push actually forces the data
- through, otherwise it is scheduled, and with high data rates (like
- with OHCI) data can get lost. */
- if (tty)
- tty->low_latency = 1;
-
/* clear the throttle flags */
spin_lock_irqsave(&port->lock, flags);
port->throttled = 0;
/* local variables */
static int debug;
-static int low_latency = 1; /* tty low latency flag, on by default */
-
static atomic_t CmdUrbs; /* Number of outstanding Command Write Urbs */
if (edge_port == NULL)
return -ENODEV;
- if (tty)
- tty->low_latency = low_latency;
-
/* see if we've set up our endpoint info yet (can't set it up
in edge_startup as the structures were not set up at that time.) */
serial = port->serial;
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
#define EDGE_READ_URB_STOPPING 1
#define EDGE_READ_URB_STOPPED 2
-#define EDGE_LOW_LATENCY 1
#define EDGE_CLOSING_WAIT 4000 /* in .01 sec */
#define EDGE_OUT_BUF_SIZE 1024
static int debug;
-static int low_latency = EDGE_LOW_LATENCY;
static int closing_wait = EDGE_CLOSING_WAIT;
static int ignore_cpu_rev;
static int default_uart_mode; /* RS232 */
if (edge_port == NULL)
return -ENODEV;
- if (tty)
- tty->low_latency = low_latency;
-
port_number = port->number - port->serial->minor;
switch (port_number) {
case 0:
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency, "Low latency enabled or not");
-
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait, "Maximum wait for data to drain, in .01 secs");
priv->free_len += PACKET_SIZE;
}
- /*
- * Force low latency on. This will immediately push data to the line
- * discipline instead of queueing.
- */
-
if (tty) {
- tty->low_latency = 1;
/* FIXME: These two are bogus */
tty->raw = 1;
tty->real_raw = 1;
if (!buf_flow_init)
return -ENOMEM;
- if (tty)
- tty->low_latency = 1;
-
/* --1: Tell the modem to initialize (we think) From sniffs this is
* always the first thing that gets sent to the modem during
* opening of the device */
tty->termios->c_oflag = 0;
tty->termios->c_iflag = 0;
priv->termios_initialized = 1;
- tty->low_latency = 1;
priv->poll = 0;
}
spin_unlock_irqrestore(&priv->lock, flags);
/* someone sets the dev to 0 if the close method has been called */
port->interrupt_in_urb->dev = port->serial->dev;
-
- /* force low_latency on so that our tty_push actually forces
- * the data through, otherwise it is scheduled, and with high
- * data rates (like with OHCI) data can get lost.
- */
if (tty) {
- tty->low_latency = 1;
/* Default to echo off and other sane device settings */
tty->termios->c_lflag = 0;
data = 0x0c;
send_mos_cmd(serial, MOS_WRITE, port_number, 0x01, &data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
-
- if (tty)
- tty->low_latency = 1;
-
/* see if we've set up our endpoint info yet *
* (can't set it up in mos7720_startup as the *
* structures were not set up at that time.) */
/*
* Version Information
*/
-#define DRIVER_VERSION "1.3.1"
+#define DRIVER_VERSION "1.3.2"
#define DRIVER_DESC "Moschip 7840/7820 USB Serial Driver"
/*
#define BANDB_DEVICE_ID_USOPTL4_4 0xAC44
#define BANDB_DEVICE_ID_USOPTL4_2 0xAC42
+/* This driver also supports the ATEN UC2324 device since it is mos7840 based
+ * - if I knew the device id it would also support the ATEN UC2322 */
+#define USB_VENDOR_ID_ATENINTL 0x0557
+#define ATENINTL_DEVICE_ID_UC2324 0x2011
+
/* Interrupt Routine Defines */
#define SERIAL_IIR_RLS 0x06
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{} /* terminating entry */
};
{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7820)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
+ {USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
{} /* terminating entry */
};
status = mos7840_set_reg_sync(port, mos7840_port->ControlRegOffset,
Data);
- /* force low_latency on so that our tty_push actually forces *
- * the data through,otherwise it is scheduled, and with *
- * high data rates (like with OHCI) data can get lost. */
- if (tty)
- tty->low_latency = 1;
-
/* Check to see if we've set up our endpoint info yet *
* (can't set it up in mos7840_startup as the structures *
* were not set up at that time.) */
mos7840_set_port_private(serial->port[i], mos7840_port);
spin_lock_init(&mos7840_port->pool_lock);
- mos7840_port->port_num = ((serial->port[i]->number -
- (serial->port[i]->serial->minor)) +
- 1);
+ /* minor is not initialised until later by
+ * usb-serial.c:get_free_serial() and cannot therefore be used
+ * to index device instances */
+ mos7840_port->port_num = i + 1;
+ dbg ("serial->port[i]->number = %d", serial->port[i]->number);
+ dbg ("serial->port[i]->serial->minor = %d", serial->port[i]->serial->minor);
+ dbg ("mos7840_port->port_num = %d", mos7840_port->port_num);
+ dbg ("serial->minor = %d", serial->minor);
if (mos7840_port->port_num == 1) {
mos7840_port->SpRegOffset = 0x0;
for (i = 0; i < serial->num_ports; ++i) {
mos7840_port = mos7840_get_port_private(serial->port[i]);
- spin_lock_irqsave(&mos7840_port->pool_lock, flags);
- mos7840_port->zombie = 1;
- spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
- usb_kill_urb(mos7840_port->control_urb);
- kfree(mos7840_port->ctrl_buf);
- kfree(mos7840_port->dr);
- kfree(mos7840_port);
+ dbg ("mos7840_port %d = %p", i, mos7840_port);
+ if (mos7840_port) {
+ spin_lock_irqsave(&mos7840_port->pool_lock, flags);
+ mos7840_port->zombie = 1;
+ spin_unlock_irqrestore(&mos7840_port->pool_lock, flags);
+ usb_kill_urb(mos7840_port->control_urb);
+ kfree(mos7840_port->ctrl_buf);
+ kfree(mos7840_port->dr);
+ kfree(mos7840_port);
+ }
mos7840_set_port_private(serial->port[i], NULL);
}
{ USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */
{ USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */
{ USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */
+ { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
priv->port = port;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Start reading from the device */
usb_fill_bulk_urb(priv->bulk_read_urb, priv->udev,
usb_rcvbulkpipe(priv->udev,
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
+#define DLINK_VENDOR_ID 0x1186
+#define DLINK_PRODUCT_DWM_652 0x3e04
+
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+ { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
{ } /* Terminating entry */
};
usb_pipeout(urb->pipe), 0); */
}
- if (tty)
- tty->low_latency = 1;
-
option_send_setup(tty, port);
return 0;
{USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */
+ {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
+ {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */
+ {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
+ {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
+ {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
+ {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */
+ {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
+ {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */
+ {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
*/
-#define DRIVER_VERSION "v.1.3.2"
+#define DRIVER_VERSION "v.1.3.3"
#define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
val |= 0x02;
/* If composite device then properly report interface */
- if (serial->num_ports == 1)
+ if (serial->num_ports == 1) {
interface = sierra_calc_interface(serial);
+ /* Control message is sent only to interfaces with
+ * interrupt_in endpoints
+ */
+ if (port->interrupt_in_urb) {
+ /* send control message */
+ return usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x22, 0x21, val, interface,
+ NULL, 0, USB_CTRL_SET_TIMEOUT);
+ }
+ }
+
/* Otherwise the need to do non-composite mapping */
else {
if (port->bulk_out_endpointAddress == 2)
interface = 1;
else if (port->bulk_out_endpointAddress == 5)
interface = 2;
- }
- return usb_control_msg(serial->dev,
+ return usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev, 0),
0x22, 0x21, val, interface,
NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+ }
}
return 0;
}
}
- if (tty)
- tty->low_latency = 1;
-
sierra_send_setup(tty, port);
/* start up the interrupt endpoint if we have one */
#define TI_TRANSFER_TIMEOUT 2
-#define TI_DEFAULT_LOW_LATENCY 0
#define TI_DEFAULT_CLOSING_WAIT 4000 /* in .01 secs */
/* supported setserial flags */
-#define TI_SET_SERIAL_FLAGS (ASYNC_LOW_LATENCY)
+#define TI_SET_SERIAL_FLAGS 0
/* read urb states */
#define TI_READ_URB_RUNNING 0
/* module parameters */
static int debug;
-static int low_latency = TI_DEFAULT_LOW_LATENCY;
static int closing_wait = TI_DEFAULT_CLOSING_WAIT;
static ushort vendor_3410[TI_EXTRA_VID_PID_COUNT];
static unsigned int vendor_3410_count;
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Enable debugging, 0=no, 1=yes");
-module_param(low_latency, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(low_latency,
- "TTY low_latency flag, 0=off, 1=on, default is off");
-
module_param(closing_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(closing_wait,
"Maximum wait for data to drain in close, in .01 secs, default is 4000");
spin_lock_init(&tport->tp_lock);
tport->tp_uart_base_addr = (i == 0 ?
TI_UART1_BASE_ADDR : TI_UART2_BASE_ADDR);
- tport->tp_flags = low_latency ? ASYNC_LOW_LATENCY : 0;
tport->tp_closing_wait = closing_wait;
init_waitqueue_head(&tport->tp_msr_wait);
init_waitqueue_head(&tport->tp_write_wait);
if (mutex_lock_interruptible(&tdev->td_open_close_lock))
return -ERESTARTSYS;
- if (tty)
- tty->low_latency =
- (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
-
port_number = port->number - port->serial->minor;
memset(&(tport->tp_icount), 0x00, sizeof(tport->tp_icount));
}
tty = tty_port_tty_get(&port->port);
- if (tty && urb->actual_length) {
- usb_serial_debug_data(debug, dev, __func__,
- urb->actual_length, urb->transfer_buffer);
-
- if (!tport->tp_is_open)
- dbg("%s - port closed, dropping data", __func__);
- else
- ti_recv(&urb->dev->dev, tty,
+ if (tty) {
+ if (urb->actual_length) {
+ usb_serial_debug_data(debug, dev, __func__,
+ urb->actual_length, urb->transfer_buffer);
+
+ if (!tport->tp_is_open)
+ dbg("%s - port closed, dropping data",
+ __func__);
+ else
+ ti_recv(&urb->dev->dev, tty,
urb->transfer_buffer,
urb->actual_length);
-
- spin_lock(&tport->tp_lock);
- tport->tp_icount.rx += urb->actual_length;
- spin_unlock(&tport->tp_lock);
+ spin_lock(&tport->tp_lock);
+ tport->tp_icount.rx += urb->actual_length;
+ spin_unlock(&tport->tp_lock);
+ }
tty_kref_put(tty);
}
return -EFAULT;
tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
- tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
tport->tp_closing_wait = new_serial.closing_wait;
return 0;
dbg("%s - %s", __func__, serial->type->description);
- serial->type->shutdown(serial);
-
/* return the minor range that this device had */
if (serial->minor != SERIAL_TTY_NO_MINOR)
return_serial(serial);
- for (i = 0; i < serial->num_ports; ++i)
- serial->port[i]->port.count = 0;
-
- /* the ports are cleaned up and released in port_release() */
- for (i = 0; i < serial->num_ports; ++i)
- if (serial->port[i]->dev.parent != NULL) {
- device_unregister(&serial->port[i]->dev);
- serial->port[i] = NULL;
- }
-
/* If this is a "fake" port, we have to clean it up here, as it will
* not get cleaned up in port_release() as it was never registered with
* the driver core */
struct usb_serial *serial;
struct usb_serial_port *port;
unsigned int portNumber;
- int retval;
+ int retval = 0;
dbg("%s", __func__);
return -ENODEV;
}
+ mutex_lock(&serial->disc_mutex);
portNumber = tty->index - serial->minor;
port = serial->port[portNumber];
- if (!port) {
- retval = -ENODEV;
- goto bailout_kref_put;
- }
-
- if (port->serial->disconnected) {
+ if (!port || serial->disconnected)
retval = -ENODEV;
- goto bailout_kref_put;
- }
+ else
+ get_device(&port->dev);
+ /*
+ * Note: Our locking order requirement does not allow port->mutex
+ * to be acquired while serial->disc_mutex is held.
+ */
+ mutex_unlock(&serial->disc_mutex);
+ if (retval)
+ goto bailout_serial_put;
if (mutex_lock_interruptible(&port->mutex)) {
retval = -ERESTARTSYS;
- goto bailout_kref_put;
+ goto bailout_port_put;
}
++port->port.count;
goto bailout_mutex_unlock;
}
- retval = usb_autopm_get_interface(serial->interface);
+ mutex_lock(&serial->disc_mutex);
+ if (serial->disconnected)
+ retval = -ENODEV;
+ else
+ retval = usb_autopm_get_interface(serial->interface);
if (retval)
goto bailout_module_put;
+
/* only call the device specific open if this
* is the first time the port is opened */
retval = serial->type->open(tty, port, filp);
if (retval)
goto bailout_interface_put;
+ mutex_unlock(&serial->disc_mutex);
}
mutex_unlock(&port->mutex);
bailout_interface_put:
usb_autopm_put_interface(serial->interface);
bailout_module_put:
+ mutex_unlock(&serial->disc_mutex);
module_put(serial->type->driver.owner);
bailout_mutex_unlock:
port->port.count = 0;
tty->driver_data = NULL;
tty_port_tty_set(&port->port, NULL);
mutex_unlock(&port->mutex);
-bailout_kref_put:
+bailout_port_put:
+ put_device(&port->dev);
+bailout_serial_put:
usb_serial_put(serial);
return retval;
}
static void serial_close(struct tty_struct *tty, struct file *filp)
{
struct usb_serial_port *port = tty->driver_data;
+ struct usb_serial *serial;
+ struct module *owner;
+ int count;
if (!port)
return;
dbg("%s - port %d", __func__, port->number);
mutex_lock(&port->mutex);
+ serial = port->serial;
+ owner = serial->type->driver.owner;
if (port->port.count == 0) {
mutex_unlock(&port->mutex);
* this before we drop the port count. The call is protected
* by the port mutex
*/
- port->serial->type->close(tty, port, filp);
+ serial->type->close(tty, port, filp);
if (port->port.count == (port->console ? 2 : 1)) {
struct tty_struct *tty = tty_port_tty_get(&port->port);
}
}
- if (port->port.count == 1) {
- mutex_lock(&port->serial->disc_mutex);
- if (!port->serial->disconnected)
- usb_autopm_put_interface(port->serial->interface);
- mutex_unlock(&port->serial->disc_mutex);
- module_put(port->serial->type->driver.owner);
- }
--port->port.count;
-
+ count = port->port.count;
mutex_unlock(&port->mutex);
- usb_serial_put(port->serial);
+ put_device(&port->dev);
+
+ /* Mustn't dereference port any more */
+ if (count == 0) {
+ mutex_lock(&serial->disc_mutex);
+ if (!serial->disconnected)
+ usb_autopm_put_interface(serial->interface);
+ mutex_unlock(&serial->disc_mutex);
+ }
+ usb_serial_put(serial);
+
+ /* Mustn't dereference serial any more */
+ if (count == 0)
+ module_put(owner);
}
static int serial_write(struct tty_struct *tty, const unsigned char *buf,
static void port_free(struct usb_serial_port *port)
{
+ /*
+ * Stop all the traffic before cancelling the work, so that
+ * nobody will restart it by calling usb_serial_port_softint.
+ */
kill_traffic(port);
+ cancel_work_sync(&port->work);
+
usb_free_urb(port->read_urb);
usb_free_urb(port->write_urb);
usb_free_urb(port->interrupt_in_urb);
kfree(port->bulk_out_buffer);
kfree(port->interrupt_in_buffer);
kfree(port->interrupt_out_buffer);
- flush_scheduled_work(); /* port->work */
kfree(port);
}
usb_set_intfdata(interface, NULL);
/* must set a flag, to signal subdrivers */
serial->disconnected = 1;
+ mutex_unlock(&serial->disc_mutex);
+
+ /* Unfortunately, many of the sub-drivers expect the port structures
+ * to exist when their shutdown method is called, so we have to go
+ * through this awkward two-step unregistration procedure.
+ */
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
if (port) {
tty_kref_put(tty);
}
kill_traffic(port);
+ cancel_work_sync(&port->work);
+ device_del(&port->dev);
+ }
+ }
+ serial->type->shutdown(serial);
+ for (i = 0; i < serial->num_ports; ++i) {
+ port = serial->port[i];
+ if (port) {
+ put_device(&port->dev);
+ serial->port[i] = NULL;
}
}
+
/* let the last holder of this object
* cause it to be cleaned up */
- mutex_unlock(&serial->disc_mutex);
usb_serial_put(serial);
dev_info(dev, "device disconnected\n");
}
priv->throttled = 0;
spin_unlock_irqrestore(&priv->lock, flags);
- /*
- * Force low_latency on so that our tty_push actually forces the data
- * through, otherwise it is scheduled, and with high data rates (like
- * with OHCI) data can get lost.
- */
- if (tty)
- tty->low_latency = 1;
-
/* Start reading from the device */
usb_fill_bulk_urb(port->read_urb, serial->dev,
usb_rcvbulkpipe(serial->dev,
ifeq ($(CONFIG_USB_LIBUSUAL),)
usb-storage-objs += usual-tables.o
else
- obj-$(CONFIG_USB) += libusual.o usual-tables.o
+ obj-$(CONFIG_USB) += usb-libusual.o
+ usb-libusual-objs := libusual.o usual-tables.o
endif
obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
USB_ENDPOINT_HALT, endp,
NULL, 0, 3*HZ);
- /* reset the endpoint toggle */
if (result >= 0)
- usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe),
- usb_pipeout(pipe), 0);
+ usb_reset_endpoint(us->pusb_dev, endp);
US_DEBUGP("%s: result = %d\n", __func__, result);
return result;
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Andrew Nayenko <relan@bk.ru> */
-UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592,
+/* Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610,
"Nokia",
"Nokia 6288",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
-/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+ * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
+ */
UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
"Simple Tech/Datafab",
"CF+SM Reader",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
+ US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
* to the USB storage specification in two ways:
US_SC_DEVICE, US_PR_DEVICE, NULL,
0),
+/* Reported by Pascal Terjan <pterjan@mandriva.com>
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
+ "D-Link",
+ "USB Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
* which instructs the device to load as a modem
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_CAPACITY_HEURISTICS),
+/* Reported by Alessio Treglia <quadrispro@ubuntu.com> */
+UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001,
+ "TGE",
+ "Digital MP3 Audio Player",
+ US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ),
+
/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
mutex_lock(&wusbhc->mutex);
wusbhc_devconnect_acked(wusbhc, wusb_dev);
mutex_unlock(&wusbhc->mutex);
+
+ wusb_dev_put(wusb_dev);
}
/*
/* After a device disconnects, change the GTK (see [WUSB]
* section 6.2.11.2). */
- wusbhc_gtk_rekey(wusbhc);
+ if (wusbhc->active)
+ wusbhc_gtk_rekey(wusbhc);
/* The Wireless USB part has forgotten about the device already; now
* khubd's timer will pick up the disconnection and remove the USB
* wusbhc_devconnect_stop - stop managing connected devices
* @wusbhc: the WUSB HC
*
- * Removes the Host Info IE and stops the keep alives.
- *
- * FIXME: should this disconnect all devices?
+ * Disconnects any devices still connected, stops the keep alives and
+ * removes the Host Info IE.
*/
void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
{
- cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
- WARN_ON(!list_empty(&wusbhc->cack_list));
+ int i;
+ mutex_lock(&wusbhc->mutex);
+ for (i = 0; i < wusbhc->ports_max; i++) {
+ if (wusbhc->port[i].wusb_dev)
+ __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]);
+ }
+ mutex_unlock(&wusbhc->mutex);
+
+ cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
kfree(wusbhc->wuie_host_info);
wusbhc->wuie_host_info = NULL;
wusb_trust_timeout_store);
/*
- * Show & store the current WUSB CHID
+ * Show the current WUSB CHID.
*/
static ssize_t wusb_chid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+ const struct wusb_ckhdid *chid;
ssize_t result = 0;
if (wusbhc->wuie_host_info != NULL)
- result += ckhdid_printf(buf, PAGE_SIZE,
- &wusbhc->wuie_host_info->CHID);
+ chid = &wusbhc->wuie_host_info->CHID;
+ else
+ chid = &wusb_ckhdid_zero;
+
+ result += ckhdid_printf(buf, PAGE_SIZE, chid);
+ result += sprintf(buf + result, "\n");
+
return result;
}
/*
- * Store a new CHID
- *
- * This will (FIXME) trigger many changes.
- *
- * - Send an all zeros CHID and it will stop the controller
- * - Send a non-zero CHID and it will start it
- * (unless it was started, it will just change the CHID,
- * diconnecting all devices first).
+ * Store a new CHID.
*
- * So first we scan the MMC we are sent and then we act on it. We
- * read it in the same format as we print it, an ASCII string of 16
- * hex bytes.
+ * - Write an all zeros CHID and it will stop the controller
+ * - Write a non-zero CHID and it will start it.
*
* See wusbhc_chid_set() for more info.
*/
{
struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
- if (status == 0) {
+ if (status == 0 && wusb_dev) {
wusb_dev->entry_ts = jiffies;
- /* wusbhc_devconnect_acked() can't be called from from
+ /* wusbhc_devconnect_acked() can't be called from
atomic context so defer it to a work queue. */
if (!list_empty(&wusb_dev->cack_node))
queue_work(wusbd, &wusb_dev->devconnect_acked_work);
+ else
+ wusb_dev_put(wusb_dev);
}
usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Say Y if you have and plan to use such a board.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
-
To compile this driver as a module, choose M here: the
module will be called intelfb.
pixel and 32 bpp packed pixel. You can also use font widths
different from 8.
- If you need support for G400 secondary head, you must first say Y to
- "I2C support" in the character devices section, and then to
- "Matrox I2C support" and "G400 second head support" here in the
- framebuffer section. G450/G550 secondary head and digital output
- are supported without additional modules.
+ If you need support for G400 secondary head, you must say Y to
+ "Matrox I2C support" and "G400 second head support" right below.
+ G450/G550 secondary head and digital output are supported without
+ additional modules.
The driver starts in monitor mode. You must use the matroxset tool
(available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
a framebuffer device. There are both PCI and AGP versions. You
don't need to choose this to run the Radeon in plain VGA mode.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
-
There is a product page at
http://apps.ati.com/ATIcompare/
obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_FM2) += fm2fb.o
obj-$(CONFIG_FB_VT8623) += vt8623fb.o
-obj-$(CONFIG_FB_CYBLA) += cyblafb.o
obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
obj-$(CONFIG_FB_LE80578) += vermilion/
obj-$(CONFIG_FB_S3) += s3fb.o
writeb(0xff, mmio_base + 0x78c);
chips_hw_init(p);
+ return 0;
}
static int __devinit
found:
/*
* Some methods fail to retrieve SCLK and MCLK values, we apply default
- * settings in this case (200Mhz). If that really happne often, we could
- * fetch from registers instead...
+ * settings in this case (200Mhz). If that really happens often, we
+ * could fetch from registers instead...
*/
if (rinfo->pll.mclk == 0)
rinfo->pll.mclk = 20000;
return 0;
bd = container_of(self, struct backlight_device, fb_notif);
- if (!lock_fb_info(evdata->info))
- return -ENODEV;
mutex_lock(&bd->ops_lock);
if (bd->ops)
if (!bd->ops->check_fb ||
backlight_update_status(bd);
}
mutex_unlock(&bd->ops_lock);
- unlock_fb_info(evdata->info);
return 0;
}
if (!ld->ops)
return 0;
- if (!lock_fb_info(evdata->info))
- return -ENODEV;
mutex_lock(&ld->ops_lock);
if (!ld->ops->check_fb || ld->ops->check_fb(ld, evdata->info)) {
if (event == FB_EVENT_BLANK) {
}
}
mutex_unlock(&ld->ops_lock);
- unlock_fb_info(evdata->info);
return 0;
}
*
* NOTES:
*
- * The code for depths like 24 that don't have integer number of pixels per
- * long is broken and needs to be fixed. For now I turned these types of
- * mode off.
- *
* Also need to add code to deal with cards endians that are different than
* the native cpu endians. I also need to deal with MSB position in the word.
*
// Trailing bits
if (last)
- FB_WRITEL(comp(pat, FB_READL(dst), first), dst);
+ FB_WRITEL(comp(pat, FB_READL(dst), last), dst);
}
}
void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
{
- unsigned long pat, fg;
+ unsigned long pat, pat2, fg;
unsigned long width = rect->width, height = rect->height;
int bits = BITS_PER_LONG, bytes = bits >> 3;
u32 bpp = p->var.bits_per_pixel;
else
fg = rect->color;
- pat = pixel_to_pat( bpp, fg);
+ pat = pixel_to_pat(bpp, fg);
dst = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1));
dst_idx = ((unsigned long)p->screen_base & (bytes - 1))*8;
dst_idx += p->fix.line_length*8;
}
} else {
- int right;
- int r;
- int rot = (left-dst_idx) % bpp;
+ int right, r;
void (*fill_op)(struct fb_info *p, unsigned long __iomem *dst,
int dst_idx, unsigned long pat, int left,
int right, unsigned n, int bits) = NULL;
-
- /* rotate pattern to correct start position */
- pat = pat << rot | pat >> (bpp-rot);
-
- right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+ right = left;
+ left = bpp - right;
+#else
+ right = bpp - left;
+#endif
switch (rect->rop) {
case ROP_XOR:
fill_op = bitfill_unaligned_rev;
fill_op = bitfill_unaligned;
break;
default:
- printk( KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
+ printk(KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
fill_op = bitfill_unaligned;
break;
}
while (height--) {
- dst += dst_idx >> (ffs(bits) - 1);
+ dst += dst_idx / bits;
dst_idx &= (bits - 1);
- fill_op(p, dst, dst_idx, pat, left, right,
+ r = dst_idx % bpp;
+ /* rotate pattern to the correct start position */
+ pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+ fill_op(p, dst, dst_idx, pat2, left, right,
width*bpp, bits);
- r = (p->fix.line_length*8) % bpp;
- pat = pat << (bpp-r) | pat >> r;
dst_idx += p->fix.line_length*8;
}
}
default:
dev_dbg(info->device,
"Unsupported bpp size: %d\n", var->bits_per_pixel);
- assert(false);
- /* should never occur */
- break;
+ return -EINVAL;
}
if (var->xres_virtual < var->xres)
}
+ if (!lock_fb_info(info))
+ return;
event.info = info;
event.data = ␣
fb_notifier_call_chain(FB_EVENT_CONBLANK, &event);
+ unlock_fb_info(info);
}
static int fbcon_blank(struct vc_data *vc, int blank, int mode_switch)
{
int i, idx;
- if (!lock_fb_info(info))
- return -ENODEV;
idx = info->node;
for (i = first_fb_vc; i <= last_fb_vc; i++) {
if (con2fb_map[i] == idx)
if (primary_device == idx)
primary_device = -1;
- unlock_fb_info(info);
-
if (!num_registered_fb)
unregister_con_driver(&fb_con);
{
int ret = 0, i, idx;
- if (!lock_fb_info(info))
- return -ENODEV;
idx = info->node;
fbcon_select_primary(info);
- unlock_fb_info(info);
if (info_idx == -1) {
for (i = first_fb_vc; i <= last_fb_vc; i++) {
switch(action) {
case FB_EVENT_SUSPEND:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_suspended(info);
- unlock_fb_info(info);
break;
case FB_EVENT_RESUME:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_resumed(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_CHANGE:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_modechanged(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_CHANGE_ALL:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_set_all_vcs(info);
- unlock_fb_info(info);
break;
case FB_EVENT_MODE_DELETE:
mode = event->data;
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
ret = fbcon_mode_deleted(info, mode);
- unlock_fb_info(info);
break;
case FB_EVENT_FB_UNBIND:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
idx = info->node;
- unlock_fb_info(info);
ret = fbcon_fb_unbind(idx);
break;
case FB_EVENT_FB_REGISTERED:
con2fb->framebuffer = con2fb_map[con2fb->console - 1];
break;
case FB_EVENT_BLANK:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_fb_blanked(info, *(int *)event->data);
- unlock_fb_info(info);
break;
case FB_EVENT_NEW_MODELIST:
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_new_modelist(info);
- unlock_fb_info(info);
break;
case FB_EVENT_GET_REQ:
caps = event->data;
- if (!lock_fb_info(info)) {
- ret = -ENODEV;
- goto done;
- }
fbcon_get_requirement(info, caps);
- unlock_fb_info(info);
break;
}
done:
font->charcount = vga_512_chars ? 512 : 256;
if (!font->data)
return 0;
- return vgacon_do_font_op(&state, font->data, 0, 0);
+ return vgacon_do_font_op(&state, font->data, 0, vga_512_chars);
}
#else
unsigned int size_total;
int request_succeeded = 0;
- printk(KERN_INFO "efifb: probing for efifb\n");
-
if (!screen_info.lfb_depth)
screen_info.lfb_depth = 32;
if (!screen_info.pages)
screen_info.pages = 1;
+ if (!screen_info.lfb_base) {
+ printk(KERN_DEBUG "efifb: invalid framebuffer address\n");
+ return -ENODEV;
+ }
+ printk(KERN_INFO "efifb: probing for efifb\n");
/* just assume they're all unset if any are */
if (!screen_info.blue_size) {
case 8:
return 0x0101010101010101ul*pixel;
case 12:
- return 0x0001001001001001ul*pixel;
+ return 0x1001001001001001ul*pixel;
case 16:
return 0x0001000100010001ul*pixel;
case 24:
- return 0x0000000001000001ul*pixel;
+ return 0x0001000001000001ul*pixel;
case 32:
return 0x0000000100000001ul*pixel;
default:
case 8:
return 0x01010101ul*pixel;
case 12:
- return 0x00001001ul*pixel;
+ return 0x01001001ul*pixel;
case 16:
return 0x00010001ul*pixel;
case 24:
- return 0x00000001ul*pixel;
+ return 0x01000001ul*pixel;
case 32:
return 0x00000001ul*pixel;
default:
#endif /* CONFIG_FB_CFB_REV_PIXELS_IN_BYTE */
+#define cpu_to_le_long _cpu_to_le_long(BITS_PER_LONG)
+#define _cpu_to_le_long(x) __cpu_to_le_long(x)
+#define __cpu_to_le_long(x) cpu_to_le##x
+
+#define le_long_to_cpu _le_long_to_cpu(BITS_PER_LONG)
+#define _le_long_to_cpu(x) __le_long_to_cpu(x)
+#define __le_long_to_cpu(x) le##x##_to_cpu
+
+static inline unsigned long rolx(unsigned long word, unsigned int shift, unsigned int x)
+{
+ return (word << shift) | (word >> (x - shift));
+}
+
#endif /* FB_DRAW_H */
return -EINVAL;
con2fb.framebuffer = -1;
event.data = &con2fb;
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
fb_notifier_call_chain(FB_EVENT_GET_CONSOLE_MAP, &event);
+ unlock_fb_info(info);
ret = copy_to_user(argp, &con2fb, sizeof(con2fb)) ? -EFAULT : 0;
break;
case FBIOPUT_CON2FBMAP:
break;
}
event.data = &con2fb;
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
ret = fb_notifier_call_chain(FB_EVENT_SET_CONSOLE_MAP, &event);
+ unlock_fb_info(info);
break;
case FBIOBLANK:
if (!lock_fb_info(info))
registered_fb[i] = fb_info;
event.info = fb_info;
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
fb_notifier_call_chain(FB_EVENT_FB_REGISTERED, &event);
+ unlock_fb_info(fb_info);
return 0;
}
goto done;
}
+
+ if (!lock_fb_info(fb_info))
+ return -ENODEV;
event.info = fb_info;
ret = fb_notifier_call_chain(FB_EVENT_FB_UNBIND, &event);
+ unlock_fb_info(fb_info);
if (ret) {
ret = -EINVAL;
{
struct fb_event event;
+ if (!lock_fb_info(info))
+ return;
event.info = info;
if (state) {
fb_notifier_call_chain(FB_EVENT_SUSPEND, &event);
info->state = FBINFO_STATE_RUNNING;
fb_notifier_call_chain(FB_EVENT_RESUME, &event);
}
+ unlock_fb_info(info);
}
/**
err = 1;
if (!list_empty(&info->modelist)) {
+ if (!lock_fb_info(info))
+ return -ENODEV;
event.info = info;
err = fb_notifier_call_chain(FB_EVENT_NEW_MODELIST, &event);
+ unlock_fb_info(info);
}
return err;
static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024;
static void *gbe_mem;
static dma_addr_t gbe_dma_addr;
-unsigned long gbe_mem_phys;
+static unsigned long gbe_mem_phys;
static struct {
uint16_t *cpu;
.vmode = FB_VMODE_NONINTERLACED,
};
-struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
static int flat_panel_enabled = 0;
* console.
*/
-void gbe_turn_off(void)
+static void gbe_turn_off(void)
{
int i;
unsigned int val, x, y, vpixen_off;
* Initialization
*/
-int __init gbefb_setup(char *options)
+static int __init gbefb_setup(char *options)
{
char *this_opt;
static struct platform_device *gbefb_device;
-int __init gbefb_init(void)
+static int __init gbefb_init(void)
{
int ret = platform_driver_register(&gbefb_driver);
if (!ret) {
return ret;
}
-void __exit gbefb_exit(void)
+static void __exit gbefb_exit(void)
{
platform_device_unregister(gbefb_device);
platform_driver_unregister(&gbefb_driver);
#define PCI_DEVICE_ID_INTEL_830M 0x3577
#define PCI_DEVICE_ID_INTEL_845G 0x2562
#define PCI_DEVICE_ID_INTEL_85XGM 0x3582
+#define PCI_DEVICE_ID_INTEL_854 0x358E
#define PCI_DEVICE_ID_INTEL_865G 0x2572
#define PCI_DEVICE_ID_INTEL_915G 0x2582
#define PCI_DEVICE_ID_INTEL_915GM 0x2592
INTEL_85XGM,
INTEL_852GM,
INTEL_852GME,
+ INTEL_854,
INTEL_855GM,
INTEL_855GME,
INTEL_865G,
switch(dinfo->chipset) {
case INTEL_830M:
case INTEL_845G:
+ case INTEL_854:
case INTEL_855GM:
case INTEL_865G:
dinfo->output[i].type = INTELFB_OUTPUT_DVO;
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_845G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_845G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_85XGM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_85XGM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_865G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_865G },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_854, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_854 },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915G },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_915GM, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_915GM },
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_945G, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, INTELFB_CLASS_MASK, INTEL_945G },
dinfo->mobile = 0;
dinfo->pll_index = PLLS_I8xx;
return 0;
+ case PCI_DEVICE_ID_INTEL_854:
+ dinfo->mobile = 1;
+ dinfo->name = "Intel(R) 854";
+ dinfo->chipset = INTEL_854;
+ return 0;
case PCI_DEVICE_ID_INTEL_85XGM:
tmp = 0;
dinfo->mobile = 1;
P3
-145 113
+# Standard 224-color Linux logo
+80 80
255
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 3 4 4 6 7 7
-8 10 10 8 10 10 6 8 8 6 7 7 3 4 4 2 2 2
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 4 5 5 17 18 17
-27 29 28 35 37 36 40 43 41 43 45 43 40 43 41 37 39 37
-32 34 33 27 30 29 23 25 24 17 21 21 15 18 18 12 15 15
-11 13 13 8 10 10 6 7 7 3 4 4 1 1 1 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 13 13 13 32 34 33 49 51 48 60 60 56 58 59 55
-55 57 54 55 56 53 49 51 48 43 45 43 39 40 39 33 37 35
-28 31 30 23 27 26 20 23 23 17 20 20 14 17 17 13 16 16
-11 14 14 10 13 13 10 12 12 9 11 11 8 10 10 6 7 7
-2 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 12 15 15
-12 15 15 8 9 9 2 3 3 0 0 0 1 1 1 25 27 26
-55 56 53 68 70 65 65 66 61 65 66 61 63 64 60 63 64 60
-58 59 55 51 52 50 47 48 46 41 42 42 35 37 36 30 32 31
-26 28 27 20 24 24 18 22 22 16 19 19 14 17 17 13 16 16
-12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10
-8 9 9 6 8 8 3 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 6 7 7 20 24 24 23 27 26
-23 27 26 18 22 22 11 13 13 23 24 24 61 63 57 72 73 67
-72 73 67 68 70 65 68 70 65 68 70 65 63 64 60 58 59 55
-55 56 53 47 48 46 41 42 42 35 37 36 30 32 31 26 28 27
-20 24 24 18 22 22 16 20 20 15 19 19 14 17 17 13 16 16
-12 15 15 12 15 15 11 14 14 10 13 13 10 12 12 9 11 11
-8 10 10 8 9 9 7 9 9 6 7 7 1 2 2 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 4 5 5 5 6 5 4 5 5
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 15 19 19 40 41 39 53 55 47
-33 36 34 27 30 29 51 52 50 72 73 67 72 73 67 72 73 67
-72 73 67 68 70 65 68 70 65 63 64 60 58 59 55 51 52 50
-47 48 46 40 43 41 33 37 35 30 32 31 26 28 27 20 24 24
-18 22 22 17 21 21 16 19 19 14 18 18 14 17 17 13 17 17
-13 16 16 12 15 15 12 15 15 11 14 14 10 13 13 10 12 12
-9 11 11 8 10 10 8 9 9 7 9 9 6 8 8 3 4 4
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-2 2 2 6 8 8 10 12 12 10 12 12 10 12 12 10 12 12
-6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 20 23 23 71 71 57 131 127 93
-115 113 82 63 64 60 72 73 67 72 73 67 72 73 67 72 73 67
-68 70 65 65 66 61 61 63 57 55 57 54 49 51 48 43 45 43
-39 40 39 33 36 34 28 31 30 23 27 26 20 24 24 20 23 23
-17 21 21 16 20 20 15 19 19 15 18 18 14 18 18 14 17 17
-13 17 17 13 16 16 12 15 15 12 15 15 11 14 14 10 13 13
-10 12 12 9 11 11 8 10 10 7 9 9 7 9 9 6 8 8
-4 5 5 0 0 0 0 0 0 0 0 0 1 1 1 6 7 7
-10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-10 12 12 3 4 4 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 18 22 22 71 71 57 144 139 99
-84 83 72 68 70 65 72 73 67 72 73 67 68 70 65 65 66 61
-63 64 60 55 57 54 51 52 50 47 48 46 40 43 41 35 37 36
-30 32 31 27 29 28 23 27 26 20 24 24 18 22 22 17 21 21
-16 20 20 15 19 19 15 19 19 15 19 19 15 18 18 14 18 18
-14 17 17 13 17 17 13 16 16 12 15 15 12 15 15 11 14 14
-10 13 13 9 12 12 9 11 11 8 10 10 7 9 9 6 8 8
-6 8 8 3 4 4 0 0 0 2 2 2 8 10 10 10 12 12
-10 12 12 10 12 12 11 13 13 36 38 35 61 61 53 48 49 45
-10 12 12 7 9 9 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 15 19 19 61 61 53 84 83 72
-68 70 65 72 73 67 68 70 65 68 70 65 63 64 60 58 59 55
-51 52 50 47 48 46 41 42 42 37 39 37 32 35 33 28 31 30
-23 27 26 20 24 24 20 23 23 18 22 22 17 21 21 17 21 21
-17 21 21 17 21 21 17 20 20 16 20 20 16 20 20 16 19 19
-15 18 18 14 18 18 13 17 17 13 16 16 12 15 15 12 15 15
-11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 7 9 9
-6 8 8 6 8 8 5 6 5 9 11 11 10 12 12 10 12 12
-19 20 18 82 81 62 149 145 103 160 154 106 142 137 94 96 95 69
-10 12 12 10 12 12 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 10 12 12 44 46 43 68 70 65
-72 73 67 68 70 65 68 70 65 63 64 60 55 57 54 49 51 48
-43 45 43 39 40 39 33 37 35 30 32 31 26 28 27 23 27 26
-20 24 24 18 22 22 18 22 22 18 22 22 18 22 22 20 23 23
-20 24 24 23 25 24 23 25 24 22 24 23 20 23 23 18 22 22
-17 20 20 15 19 19 15 18 18 14 17 17 13 16 16 12 15 15
-11 14 14 11 13 13 10 12 12 9 11 11 8 10 10 8 9 9
-7 9 9 7 9 9 10 12 12 10 12 12 10 12 12 71 71 57
-164 159 111 186 182 128 186 182 128 171 165 117 151 147 98 96 95 69
-10 12 12 10 12 12 3 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 8 10 10 63 64 60 68 70 65
-72 73 67 68 70 65 63 64 60 55 57 54 47 48 46 40 43 41
-33 37 35 30 32 31 27 29 28 23 27 26 20 24 24 20 23 23
-18 22 22 18 22 22 20 23 22 21 25 23 23 27 26 27 29 28
-28 31 30 31 33 31 31 33 31 31 33 31 28 31 30 26 28 27
-23 25 24 20 23 22 16 20 20 15 18 18 14 17 17 13 16 16
-12 15 15 11 14 14 10 13 13 10 12 12 9 11 11 8 10 10
-10 12 12 10 13 13 10 12 12 12 14 14 96 95 69 165 161 109
-186 182 128 192 187 134 192 187 134 176 171 126 160 154 106 103 101 77
-10 12 12 10 12 12 5 6 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 35 37 36 68 70 65 72 73 67
-68 70 65 65 66 61 58 59 55 49 51 48 40 43 41 33 37 35
-28 31 30 23 27 26 20 24 24 20 23 23 18 22 22 18 22 22
-18 22 22 20 23 23 23 27 26 27 30 29 32 35 33 37 39 37
-40 43 41 44 46 43 46 47 43 44 46 43 40 43 41 36 38 35
-31 33 31 27 29 28 22 24 23 17 21 21 15 18 18 14 17 17
-13 16 16 12 15 15 11 14 14 11 14 14 11 13 13 13 16 16
-13 16 16 11 14 14 10 12 12 79 78 62 142 137 94 164 159 111
-178 174 128 192 187 134 192 187 134 176 171 126 160 154 106 96 95 69
-10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 55 57 54 68 70 65 72 73 67
-68 70 65 63 64 60 55 56 53 43 45 43 35 37 36 28 31 30
-23 27 26 20 24 24 18 22 22 17 21 21 17 21 21 17 21 21
-20 24 24 25 27 26 31 33 31 38 39 37 46 47 43 53 55 47
-61 61 53 66 65 55 66 65 55 66 65 55 61 61 53 53 55 47
-46 47 43 37 39 37 30 33 30 24 26 24 17 21 21 15 18 18
-13 17 17 12 15 15 12 15 15 13 16 16 14 18 18 14 18 18
-14 17 17 12 15 15 30 31 28 118 116 76 134 131 96 160 154 106
-174 170 121 178 174 128 178 174 128 171 165 117 151 147 98 96 95 69
-10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 63 64 60 68 70 65 68 70 65
-65 66 61 58 59 55 49 51 48 39 40 39 30 32 31 23 27 26
-20 24 24 18 22 22 17 21 21 16 20 20 17 21 21 20 23 23
-25 27 26 32 35 33 43 44 41 53 55 47 66 65 55 75 75 61
-82 81 62 84 83 72 87 86 72 87 86 72 82 81 62 75 75 61
-66 65 55 53 55 47 40 41 39 31 33 31 23 25 24 17 20 20
-14 18 18 13 16 16 12 15 15 12 15 15 13 17 17 14 18 18
-14 18 18 13 16 16 46 47 43 96 95 69 125 122 87 142 137 94
-160 154 106 165 161 109 164 159 111 155 149 109 142 137 94 75 75 61
-10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 60 60 56 68 70 65 68 70 65
-63 64 60 55 57 54 46 47 45 35 37 36 27 30 29 23 25 24
-18 22 22 17 21 21 16 20 20 17 21 21 18 22 22 23 27 26
-31 33 31 43 44 41 55 56 53 71 71 57 84 83 72 92 91 72
-103 101 77 92 91 72 82 81 62 82 81 62 87 86 72 92 91 72
-84 83 72 71 71 57 55 56 53 43 44 41 30 33 30 22 24 23
-16 19 19 14 17 17 12 15 15 12 15 15 13 16 16 14 18 18
-14 18 18 14 17 17 43 44 41 82 81 62 118 116 76 125 122 87
-142 137 94 144 139 99 144 139 99 134 131 96 118 116 76 53 55 47
-10 12 12 10 12 12 6 8 8 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 47 48 46 63 64 60 63 64 60
-55 57 54 49 51 48 40 43 41 32 34 33 26 28 27 20 24 24
-18 22 22 16 20 20 16 20 20 17 21 21 20 24 24 28 31 30
-40 41 39 53 55 47 75 75 61 90 89 73 87 86 72 48 49 45
-14 14 13 2 2 2 1 2 2 1 1 1 1 1 1 2 2 2
-19 20 18 43 44 41 66 65 55 53 55 47 38 39 37 26 28 27
-18 22 22 14 18 18 13 16 16 12 15 15 12 15 15 13 17 17
-14 18 18 14 18 18 30 31 28 66 65 55 96 95 69 103 101 77
-118 116 76 118 116 76 118 116 76 118 116 76 103 101 77 36 38 35
-10 12 12 10 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 28 31 30 55 57 54 51 52 50
-49 51 48 41 42 42 35 37 36 28 31 30 23 27 26 20 23 23
-17 21 21 16 20 20 16 20 20 18 22 22 23 27 26 33 36 34
-48 49 45 71 71 57 82 81 62 43 44 41 8 9 9 6 7 7
-6 7 7 6 7 7 6 7 7 5 6 5 4 5 5 3 4 4
-2 3 3 1 2 2 4 5 4 36 38 35 48 49 45 32 35 33
-21 25 23 16 19 19 13 17 17 12 15 15 12 15 15 13 16 16
-14 18 18 14 18 18 16 18 16 36 38 35 61 61 53 82 81 62
-96 95 69 96 95 69 96 95 69 96 95 69 79 78 62 19 20 18
-10 12 12 10 12 12 4 5 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 13 13 13 46 47 45 43 45 43
-40 43 41 35 37 36 30 32 31 23 27 26 20 24 24 18 22 22
-17 21 21 16 20 20 17 21 21 20 23 23 27 30 29 40 41 39
-61 61 53 53 55 47 16 17 16 9 11 11 10 12 12 10 12 12
-10 12 12 10 12 12 10 12 12 9 11 11 8 10 10 8 9 9
-6 8 8 5 6 5 4 5 5 2 3 3 19 20 18 38 39 37
-26 28 27 17 21 21 14 17 17 13 16 16 12 15 15 12 15 15
-13 17 17 14 18 18 12 15 15 13 12 7 30 31 28 46 47 43
-53 55 47 66 65 55 66 65 55 53 55 47 36 38 35 10 12 12
-10 12 12 10 12 12 2 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 1 1 1 33 37 35 35 37 36
-32 35 33 28 31 30 23 27 26 20 24 24 18 22 22 17 21 21
-16 20 20 16 20 20 17 21 21 21 25 23 31 33 31 44 46 43
-31 33 31 11 13 13 12 14 14 12 15 15 13 16 16 14 17 17
-14 17 17 14 17 17 14 17 17 13 16 16 12 15 15 12 14 14
-11 13 13 9 11 11 8 10 10 6 8 8 4 5 5 17 18 17
-30 33 30 20 23 22 15 18 18 13 16 16 12 15 15 12 14 14
-13 16 16 14 17 17 14 18 18 11 12 11 7 7 5 16 17 12
-21 22 20 30 31 28 25 27 25 21 22 20 14 14 13 10 12 12
-10 12 12 9 11 11 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 18 22 22 27 30 29
-27 29 28 40 41 39 53 55 47 53 55 47 53 55 47 46 47 43
-25 27 25 16 20 20 17 21 21 23 25 24 31 33 31 20 20 20
-12 15 15 14 17 17 15 19 19 16 20 20 17 21 21 18 22 22
-18 22 22 18 22 22 18 22 22 17 21 21 17 21 21 16 19 19
-15 18 18 13 16 16 12 15 15 10 12 12 8 10 10 6 8 8
-21 22 21 22 24 23 15 19 19 13 17 17 13 16 16 12 15 15
-12 15 15 13 17 17 14 18 18 14 18 18 13 15 14 10 9 6
-7 7 5 7 7 5 7 7 5 9 11 11 10 12 12 10 12 12
-10 12 12 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 82 81 62
-118 116 76 118 116 76 161 156 96 161 156 96 161 156 96 118 116 76
-118 116 76 96 95 69 53 55 47 22 24 23 14 17 17 13 16 16
-15 19 19 17 21 21 18 22 22 20 24 24 20 24 24 23 27 26
-23 27 26 23 27 26 23 27 26 23 27 26 23 27 26 20 24 24
-20 23 23 17 21 21 16 19 19 14 17 17 12 15 15 10 12 12
-9 11 11 20 23 22 16 19 19 14 17 17 13 16 16 12 15 15
-11 14 14 13 16 16 14 17 17 14 18 18 14 17 17 12 15 15
-10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-9 11 11 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 53 55 47 161 156 96
-161 156 96 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 118 116 76 96 95 69 21 22 20 16 19 19
-18 22 22 20 24 24 23 27 26 23 27 26 26 28 27 27 30 29
-27 30 29 18 22 22 12 14 14 8 10 10 9 11 11 17 21 21
-23 27 26 23 27 26 20 24 24 18 22 22 16 20 20 14 17 17
-12 14 14 14 17 17 16 20 20 14 17 17 13 17 17 13 16 16
-12 15 15 12 15 15 13 17 17 14 18 18 14 17 17 13 16 16
-11 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-4 5 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 13 12 7 118 116 76 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 30 31 28
-20 24 24 23 27 26 27 30 29 28 31 30 30 32 31 23 27 26
-16 19 19 17 21 21 12 15 15 9 11 11 10 12 12 9 11 11
-20 24 24 28 31 30 26 28 27 23 27 26 20 24 24 17 21 21
-15 19 19 13 16 16 16 19 19 14 18 18 14 17 17 13 16 16
-12 15 15 11 14 14 13 16 16 14 17 17 14 18 18 14 17 17
-12 15 15 10 12 12 10 12 12 10 12 12 10 12 12 8 9 9
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 82 81 62 161 156 96 230 229 82
-230 229 82 233 233 100 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 118 116 76
-27 29 28 27 30 29 30 32 31 30 32 31 23 27 26 20 24 24
-26 28 27 17 21 21 6 7 7 72 73 67 145 141 105 15 15 15
-14 17 17 33 37 35 30 32 31 28 31 30 26 28 27 23 27 26
-20 23 23 16 20 20 15 19 19 14 18 18 14 17 17 13 16 16
-12 15 15 11 14 14 12 15 15 13 17 17 14 18 18 14 17 17
-13 16 16 11 13 13 10 12 12 10 12 12 9 11 11 1 1 1
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 16 17 12 161 156 96 230 229 82 230 229 82
-243 242 120 235 234 117 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
-82 81 62 28 31 30 28 31 30 27 30 29 28 31 30 30 32 31
-33 37 35 13 16 16 3 3 3 105 104 92 210 208 158 12 14 14
-17 21 21 33 37 35 33 37 35 32 35 33 30 32 31 27 30 29
-23 27 26 20 23 23 17 20 20 15 18 18 14 18 18 13 17 17
-13 16 16 12 15 15 11 14 14 13 16 16 14 17 17 14 18 18
-13 17 17 12 15 15 10 12 12 10 12 12 3 4 4 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 96 95 69 230 229 82 230 229 82 244 244 132
-241 241 143 243 242 120 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-161 156 96 46 47 43 32 35 33 33 37 35 33 37 35 33 37 35
-40 43 41 23 27 26 1 1 1 2 2 2 24 26 24 14 17 17
-23 27 26 33 37 35 33 37 35 33 37 35 33 37 35 30 32 31
-27 30 29 23 27 26 20 23 23 15 18 18 14 18 18 14 17 17
-13 16 16 12 15 15 11 14 14 12 15 15 13 17 17 14 17 17
-14 17 17 13 16 16 11 13 13 6 8 8 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 16 17 12 161 156 96 230 229 82 235 234 117 239 239 170
-239 239 170 236 236 101 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 118 116 76 33 37 35 33 37 35 37 39 37 37 39 37
-43 45 43 49 51 48 20 24 24 8 10 10 17 20 20 35 37 36
-33 37 35 40 43 41 37 39 37 35 37 36 33 37 35 33 37 35
-30 32 31 27 30 29 23 27 26 15 19 19 14 18 18 14 17 17
-13 17 17 13 16 16 12 15 15 11 14 14 13 16 16 14 17 17
-14 17 17 13 17 17 11 14 14 4 5 5 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 96 95 69 230 229 82 230 229 82 239 239 170 251 251 187
-241 241 143 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 36 38 35 33 37 35 33 37 35 33 37 35
-37 39 37 47 48 46 55 57 54 55 57 54 49 51 48 43 45 43
-43 45 43 43 45 43 40 43 41 40 43 41 37 39 37 33 37 35
-33 37 35 28 31 30 26 28 27 16 20 20 15 18 18 14 18 18
-14 17 17 13 16 16 12 15 15 11 14 14 12 15 15 13 17 17
-14 17 17 14 17 17 8 10 10 5 7 7 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-16 17 12 230 229 82 230 229 82 243 242 120 251 251 187 251 251 187
-246 246 123 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 66 65 55 30 32 31 32 35 33 33 37 35
-33 37 35 37 39 37 40 43 41 47 48 46 49 51 48 51 52 50
-55 57 54 55 57 54 51 52 50 47 48 46 43 45 43 39 40 39
-33 37 35 30 32 31 26 28 27 17 21 21 15 19 19 14 18 18
-14 17 17 13 16 16 12 15 15 12 14 14 11 14 14 13 16 16
-14 17 17 12 15 15 7 9 9 6 8 8 1 1 1 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-96 95 69 230 229 82 230 229 82 239 239 170 251 251 187 239 239 170
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 96 95 69 27 30 29 28 31 30 30 32 31
-33 37 35 40 43 41 46 47 45 55 57 54 63 64 60 72 73 67
-72 73 67 72 73 67 72 73 67 65 66 61 55 57 54 47 48 46
-39 40 39 32 35 33 27 30 29 17 21 21 15 19 19 15 18 18
-14 18 18 13 17 17 13 16 16 12 15 15 11 14 14 12 14 14
-13 16 16 9 11 11 7 9 9 9 11 11 66 65 55 115 113 82
-21 22 20 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 13 12 7
-230 229 82 230 229 82 236 236 101 251 251 187 251 251 187 246 246 123
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 118 116 76 23 27 26 26 28 27 32 35 33
-51 52 50 90 89 73 110 109 94 145 141 105 168 163 120 177 172 135
-177 172 135 188 184 146 188 184 146 181 176 137 194 191 148 188 184 146
-184 179 149 188 184 146 188 184 146 156 151 111 177 172 135 181 176 137
-177 172 135 168 163 120 168 163 120 158 153 112 156 151 111 158 153 112
-156 151 111 158 153 112 177 172 135 188 184 146 188 184 146 194 189 146
-36 38 35 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 82 81 62
-230 229 82 230 229 82 244 244 132 251 251 187 244 244 132 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 82 81 62
-96 95 69 230 229 82 181 178 103 110 109 94 156 151 111 188 184 146
-188 184 146 197 193 154 188 184 146 184 181 136 188 184 146 168 163 120
-168 163 120 178 174 128 156 151 111 158 153 112 174 170 121 156 151 111
-156 151 111 158 153 112 156 151 111 168 163 120 178 174 128 181 176 137
-176 171 126 178 174 128 184 181 136 176 171 126 178 174 128 184 181 136
-176 171 126 178 174 128 184 181 136 164 159 111 155 149 109 96 95 69
-1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 2 2 1 161 156 96
-230 229 82 230 229 82 244 244 132 244 244 132 236 236 101 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 46 47 43 82 81 62
-158 153 112 197 193 154 194 189 146 184 181 136 188 184 146 168 163 120
-156 151 111 137 133 100 131 127 93 137 133 100 137 133 100 158 153 112
-121 119 87 137 133 100 156 151 111 145 141 105 99 98 80 84 83 72
-63 64 60 52 53 49 40 43 41 33 36 34 36 38 35 36 38 35
-38 39 37 43 44 41 43 44 41 46 47 43 48 49 45 48 49 45
-46 47 43 36 38 35 30 31 28 19 20 18 6 7 7 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 36 38 35 230 229 82
-230 229 82 230 229 82 246 246 123 236 236 101 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 53 55 47 121 119 87
-176 171 126 171 165 117 161 156 96 82 81 62 53 55 47 33 37 35
-39 40 39 63 64 60 99 98 80 121 119 87 137 133 100 177 172 135
-176 171 126 184 181 136 131 127 93 131 127 93 110 109 94 84 83 72
-51 52 50 39 40 39 27 29 28 18 22 22 16 19 19 15 19 19
-15 19 19 14 18 18 14 17 17 13 16 16 12 15 15 11 14 14
-10 13 13 9 12 12 9 11 11 8 9 9 7 9 9 1 1 1
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82
-230 229 82 230 229 82 236 236 101 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 96 95 69 71 71 57
-36 38 35 118 116 76 118 116 76 12 15 15 15 18 18 20 24 24
-33 37 35 55 56 53 84 83 72 110 109 94 145 141 105 110 109 94
-168 163 120 121 119 87 156 151 111 131 127 93 87 86 72 61 63 57
-47 48 46 28 31 30 18 22 22 15 19 19 15 18 18 15 19 19
-15 19 19 14 18 18 14 17 17 13 17 17 13 16 16 12 15 15
-11 13 13 10 12 12 9 11 11 8 10 10 7 9 9 3 3 3
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 1 1 0 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
-161 156 96 230 229 82 118 116 76 11 14 14 14 17 17 18 22 22
-27 30 29 40 43 41 60 60 56 84 83 72 105 104 92 110 109 94
-110 109 94 110 109 94 99 98 80 90 89 73 68 70 65 47 48 46
-32 34 33 23 25 24 20 23 23 17 21 21 15 19 19 14 17 17
-15 19 19 15 18 18 14 18 18 13 17 17 13 16 16 12 15 15
-11 14 14 10 12 12 9 11 11 8 10 10 7 9 9 4 5 5
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 118 116 76 11 13 13 13 16 16 15 19 19
-20 24 24 30 32 31 40 43 41 51 52 50 63 64 60 72 73 67
-65 66 61 65 66 61 65 66 61 55 57 54 46 47 45 33 37 35
-27 29 28 20 24 24 17 21 21 16 20 20 16 20 20 15 19 19
-15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15
-11 14 14 10 13 13 9 12 12 8 10 10 7 9 9 6 7 7
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 53 55 47 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-161 156 96 118 116 76 53 55 47 10 13 13 12 15 15 14 17 17
-17 20 20 20 24 24 27 29 28 32 34 33 37 39 37 40 43 41
-43 45 43 41 42 42 35 37 36 30 32 31 28 31 30 23 27 26
-20 23 23 17 21 21 16 20 20 16 20 20 16 20 20 16 19 19
-15 19 19 15 19 19 14 18 18 14 17 17 13 16 16 12 15 15
-11 14 14 10 13 13 9 12 12 9 11 11 8 10 10 10 12 12
-1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 82 81 62 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96
-118 116 76 82 81 62 13 14 12 10 13 13 12 15 15 13 17 17
-15 19 19 16 20 20 20 23 23 20 24 24 23 27 26 26 28 27
-26 28 27 26 28 27 23 27 26 18 22 22 20 23 23 17 21 21
-17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 19 19
-15 19 19 15 19 19 15 18 18 14 17 17 13 17 17 13 16 16
-12 15 15 12 14 14 12 14 14 12 14 14 12 14 14 23 24 24
-6 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 161 156 96 161 156 96 118 116 76
-71 71 57 13 14 12 9 12 12 10 13 13 12 15 15 13 17 17
-15 18 18 15 19 19 16 20 20 17 21 21 17 21 21 18 22 22
-18 22 22 18 22 22 17 21 21 16 19 19 15 18 18 14 18 18
-16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-15 19 19 15 19 19 15 18 18 14 18 18 16 20 20 23 25 24
-17 21 21 25 27 26 47 48 46 47 48 46 51 52 50 72 73 67
-33 36 34 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 118 116 76 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 161 156 96 118 116 76 118 116 76 46 47 43
-9 11 11 9 11 11 10 12 12 11 13 13 12 15 15 14 17 17
-15 18 18 15 19 19 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-15 19 19 16 20 20 20 24 24 55 56 53 32 34 33 84 83 72
-90 89 73 110 109 94 110 109 94 105 104 92 110 109 94 110 109 94
-72 73 67 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 96 95 69 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 118 116 76 82 81 62 16 17 12 9 11 11
-9 11 11 9 12 12 10 13 13 12 14 14 13 16 16 14 18 18
-15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 19 19 33 36 34 99 98 80 156 151 111 145 141 105 184 179 149
-168 163 120 184 179 149 177 172 135 156 151 111 145 141 105 110 109 94
-90 89 73 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 71 71 57 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 230 229 82
-230 229 82 161 156 96 230 229 82 230 229 82 230 229 82 161 156 96
-118 116 76 82 81 62 30 31 28 9 11 11 9 11 11 9 11 11
-10 12 12 10 13 13 11 14 14 13 16 16 14 17 17 15 18 18
-15 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-18 22 22 58 59 55 137 133 100 197 193 154 214 212 158 210 208 158
-197 193 154 184 179 149 184 179 149 137 133 100 110 109 94 99 98 80
-84 83 72 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 16 17 12 230 229 82 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 230 229 82 161 156 96
-161 156 96 161 156 96 161 156 96 161 156 96 118 116 76 71 71 57
-21 22 20 12 14 14 11 13 13 10 12 12 10 12 12 10 13 13
-11 13 13 12 15 15 13 16 16 14 17 17 14 18 18 15 19 19
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 17 21 21
-23 27 26 84 83 72 184 179 149 251 251 187 210 208 158 184 179 149
-184 179 149 156 151 111 110 109 94 84 83 72 63 64 60 51 52 50
-18 22 22 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 118 116 76 230 229 82
-230 229 82 230 229 82 230 229 82 230 229 82 161 156 96 161 156 96
-161 156 96 161 156 96 118 116 76 53 55 47 20 23 22 16 19 19
-13 16 16 12 15 15 12 14 14 11 14 14 11 14 14 11 14 14
-12 15 15 13 16 16 14 17 17 15 19 19 16 20 20 17 21 21
-23 27 26 18 22 22 20 24 24 23 27 26 30 32 31 17 21 21
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-23 27 26 33 37 35 137 133 100 156 151 111 158 153 112 105 104 92
-105 104 92 68 70 65 39 40 39 18 22 22 12 14 14 12 15 15
-9 11 11 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 16 17 12 230 229 82
-230 229 82 230 229 82 230 229 82 161 156 96 118 116 76 118 116 76
-118 116 76 66 65 55 43 45 43 32 34 33 25 27 26 20 23 22
-17 20 20 15 18 18 14 17 17 15 18 18 13 16 16 14 17 17
-14 18 18 16 20 20 32 34 33 55 57 54 58 59 55 72 73 67
-105 104 92 55 57 54 65 66 61 63 64 60 40 43 41 33 37 35
-41 42 42 20 24 24 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-17 21 21 26 28 27 30 32 31 35 37 36 68 70 65 39 40 39
-23 27 26 15 18 18 13 16 16 11 14 14 9 12 12 8 10 10
-7 9 9 6 7 7 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35
-230 229 82 230 229 82 230 229 82 96 95 69 30 31 28 49 51 48
-90 89 73 68 70 65 55 57 54 47 48 46 47 48 46 43 45 43
-32 34 33 43 45 43 43 45 43 23 27 26 25 27 26 40 43 41
-40 43 41 90 89 73 110 109 94 145 141 105 156 151 111 156 151 111
-184 179 149 184 179 149 177 172 135 184 179 149 137 133 100 84 83 72
-105 104 92 63 64 60 49 51 48 47 48 46 28 31 30 18 22 22
-16 20 20 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 15 19 19 15 19 19 15 19 19 18 22 22 15 19 19
-13 16 16 12 15 15 11 14 14 10 13 13 9 12 12 9 11 11
-8 10 10 6 8 8 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-30 31 28 230 229 82 71 71 57 2 2 1 0 0 0 58 59 55
-105 104 92 84 83 72 65 66 61 84 83 72 110 109 94 110 109 94
-145 141 105 105 104 92 110 109 94 110 109 94 84 83 72 110 109 94
-158 153 112 197 193 154 197 193 154 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 197 193 154
-197 193 154 184 179 149 145 141 105 137 133 100 105 104 92 47 48 46
-20 23 23 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 19 19 15 19 19 15 19 19 14 18 18 14 17 17
-13 17 17 13 16 16 12 14 14 12 14 14 13 13 13 13 13 13
-13 13 13 12 12 12 10 10 9 6 7 7 2 2 2 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 0 0 0 0 0 0 0 65 66 61
-105 104 92 84 83 72 84 83 72 110 109 94 184 179 149 210 208 158
-210 208 158 210 208 158 214 212 158 197 193 154 214 212 158 210 208 158
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 251 251 187 184 179 149 84 83 72
-26 28 27 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18
-13 17 17 13 16 16 15 15 15 14 14 13 14 14 13 14 14 13
-13 13 13 13 13 13 12 12 12 12 12 12 12 12 12 3 4 4
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 72 73 67
-105 104 92 99 98 80 84 83 72 99 98 80 177 172 135 197 193 154
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 214 212 158 197 193 154 99 98 80
-23 27 26 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 15 19 19 15 19 19 15 18 18 14 18 18
-14 17 17 16 16 16 16 16 16 16 16 16 15 15 15 14 14 13
-14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12
-3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 84 83 72
-110 109 94 99 98 80 72 73 67 63 64 60 99 98 80 177 172 135
-184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 210 208 158 184 179 149 177 172 135 110 109 94 33 37 35
-17 21 21 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-16 20 20 16 20 20 15 19 19 15 19 19 15 19 19 14 18 18
-15 18 18 18 19 18 18 19 18 17 17 17 16 16 16 15 15 15
-14 14 13 13 13 13 13 13 13 12 12 12 12 12 12 12 12 12
-10 10 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 105 104 92
-108 107 93 99 98 80 72 73 67 63 64 60 51 52 50 87 86 72
-105 104 92 110 109 94 108 107 93 156 151 111 184 179 149 184 179 149
-197 193 154 197 193 154 197 193 154 184 179 149 184 179 149 177 172 135
-197 193 154 156 151 111 177 172 135 184 179 149 168 163 120 137 133 100
-145 141 105 110 109 94 99 98 80 47 48 46 55 57 54 15 19 19
-16 19 19 16 20 20 16 20 20 16 20 20 16 20 20 16 20 20
-17 20 20 17 21 21 16 20 20 16 19 19 15 19 19 16 19 19
-20 20 20 21 22 21 20 20 20 19 20 19 18 19 18 16 16 16
-15 15 15 14 14 13 13 13 13 13 13 13 12 12 12 12 12 12
-12 12 12 4 5 5 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 58 59 55 110 109 94
-105 104 92 90 89 73 72 73 67 55 57 54 43 45 43 39 40 39
-43 45 43 46 47 45 43 45 43 68 70 65 65 66 61 63 64 60
-108 107 93 72 73 67 105 104 92 90 89 73 72 73 67 40 43 41
-72 73 67 68 70 65 68 70 65 58 59 55 63 64 60 49 51 48
-43 45 43 33 36 34 27 30 29 20 24 24 16 20 20 15 19 19
-15 19 19 15 19 19 15 19 19 16 19 19 16 20 20 16 20 20
-17 21 21 20 24 24 20 23 22 17 21 21 17 20 20 20 20 20
-21 22 21 21 22 21 21 22 21 21 22 21 20 20 20 18 19 18
-16 16 16 15 15 15 13 13 13 13 13 13 12 12 12 12 12 12
-12 12 12 10 10 9 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 21 22 21 110 109 94 110 109 94
-105 104 92 84 83 72 68 70 65 51 52 50 41 42 42 33 37 35
-28 31 30 23 27 26 20 23 23 18 22 22 17 20 20 25 27 26
-26 28 27 27 30 29 25 27 26 20 23 23 23 27 26 30 32 31
-20 24 24 17 21 21 18 22 22 15 19 19 26 28 27 20 23 23
-14 18 18 15 19 19 15 18 18 15 19 19 15 19 19 15 19 19
-15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 16 19 19
-16 20 20 22 24 23 24 26 24 22 24 23 20 23 22 22 24 23
-24 26 24 24 26 24 23 24 24 22 24 23 21 22 21 19 20 19
-17 17 17 15 15 15 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 2 2 2 99 98 80 110 109 94 108 107 93
-105 104 92 84 83 72 63 64 60 49 51 48 39 40 39 32 34 33
-27 30 29 23 25 24 20 23 23 17 20 20 15 19 19 14 18 18
-14 17 17 13 17 17 13 17 17 13 17 17 13 17 17 13 17 17
-14 17 17 14 17 17 14 17 17 14 17 17 14 17 17 14 17 17
-14 18 18 14 18 18 14 18 18 14 18 18 15 18 18 15 19 19
-15 19 19 15 19 19 15 19 19 15 19 19 15 19 19 15 19 19
-15 19 19 17 21 21 27 29 28 26 28 27 25 27 26 25 27 26
-27 29 28 27 29 28 26 28 27 24 26 24 21 22 21 20 20 20
-18 19 18 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 51 52 50 110 109 94 110 109 94 105 104 92
-90 89 73 72 73 67 55 57 54 43 45 43 35 37 36 30 32 31
-26 28 27 20 24 24 17 21 21 16 19 19 15 18 18 14 17 17
-13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
-13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17
-14 17 17 14 17 17 14 17 17 14 18 18 14 18 18 14 18 18
-15 18 18 15 18 18 15 19 19 15 19 19 15 19 19 15 19 19
-15 19 19 15 19 19 27 29 28 32 34 33 28 31 30 27 29 28
-30 32 31 30 32 31 30 31 28 26 28 27 23 24 24 21 22 21
-19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 3 3 3 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 10 10 9 108 107 93 110 109 94 108 107 93 99 98 80
-84 83 72 63 64 60 49 51 48 40 43 41 33 36 34 27 30 29
-23 27 26 18 22 22 17 20 20 15 18 18 14 17 17 13 16 16
-13 16 16 13 16 16 12 15 15 12 15 15 12 15 15 12 15 15
-13 16 16 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
-13 17 17 13 17 17 14 17 17 14 17 17 14 17 17 14 18 18
-14 18 18 14 18 18 15 18 18 15 18 18 15 19 19 15 19 19
-15 19 19 15 19 19 17 21 21 33 36 34 32 34 33 31 33 31
-33 36 34 33 36 34 31 33 31 27 29 28 25 27 26 21 22 21
-19 20 19 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 63 64 60 137 133 100 43 45 43 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 68 70 65 110 109 94 110 109 94 105 104 92 84 83 72
-68 70 65 55 57 54 43 45 43 35 37 36 30 32 31 26 28 27
-20 24 24 17 21 21 16 19 19 14 17 17 13 16 16 12 15 15
-12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 12 15 15
-12 15 15 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16
-13 16 16 13 16 16 13 16 16 13 17 17 13 17 17 14 17 17
-14 17 17 14 17 17 14 18 18 14 18 18 14 18 18 15 18 18
-15 19 19 15 19 19 15 19 19 20 24 24 32 34 33 35 37 36
-37 39 37 35 37 36 33 36 34 30 32 31 26 28 27 22 24 23
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-1 1 1 99 98 80 184 179 149 184 179 149 68 70 65 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-15 15 15 110 109 94 110 109 94 108 107 93 99 98 80 72 73 67
-61 63 57 49 51 48 39 40 39 33 36 34 27 30 29 23 25 24
-18 22 22 16 19 19 14 17 17 13 16 16 12 15 15 12 15 15
-11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14
-11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15
-12 15 15 13 16 16 13 16 16 13 16 16 13 16 16 13 16 16
-13 17 17 14 17 17 14 17 17 14 17 17 14 18 18 14 18 18
-14 18 18 15 18 18 15 19 19 15 19 19 30 32 31 38 39 37
-39 40 39 39 40 39 35 37 36 31 33 31 27 29 28 22 24 23
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3
-110 109 94 197 193 154 210 208 158 184 179 149 68 70 65 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-68 70 65 110 109 94 110 109 94 105 104 92 84 83 72 65 66 61
-51 52 50 43 45 43 35 37 36 30 32 31 25 27 26 20 23 23
-17 20 20 15 18 18 13 16 16 12 15 15 12 15 15 11 14 14
-11 14 14 11 14 14 11 13 13 11 13 13 11 13 13 11 13 13
-11 14 14 11 14 14 11 14 14 11 14 14 11 14 14 11 14 14
-12 15 15 12 15 15 12 15 15 12 15 15 13 16 16 13 16 16
-13 16 16 13 16 16 13 17 17 13 17 17 14 17 17 14 17 17
-14 18 18 14 18 18 14 18 18 16 19 19 37 39 37 41 42 42
-41 42 42 41 42 42 38 39 37 32 34 33 27 29 28 23 24 24
-21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 8 8 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 11 11 11 137 133 100
-197 193 154 251 251 187 239 239 170 184 179 149 31 33 31 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 12 12 12
-110 109 94 110 109 94 105 104 92 90 89 73 72 73 67 58 59 55
-46 47 45 37 39 37 31 33 31 26 28 27 20 24 24 17 21 21
-15 18 18 13 16 16 12 15 15 12 14 14 11 13 13 11 13 13
-10 13 13 10 13 13 10 13 13 10 13 13 10 13 13 10 13 13
-10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14
-11 14 14 11 14 14 12 14 14 12 15 15 12 15 15 12 15 15
-13 16 16 13 16 16 13 16 16 13 16 16 13 17 17 13 17 17
-14 17 17 14 17 17 14 18 18 23 27 26 41 42 42 41 42 42
-43 45 43 41 42 42 39 40 39 33 36 34 27 29 28 23 24 24
-21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 27 29 28 168 163 120 210 208 158
-251 251 187 251 251 187 210 208 158 137 133 100 1 1 1 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 60 60 56
-110 109 94 105 104 92 105 104 92 84 83 72 65 66 61 51 52 50
-40 43 41 33 36 34 27 30 29 23 25 24 18 22 22 16 19 19
-14 17 17 12 15 15 11 14 14 11 14 14 10 13 13 10 13 13
-10 13 13 10 12 12 10 12 12 10 12 12 10 12 12 10 12 12
-10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13
-11 13 13 11 14 14 11 14 14 11 14 14 11 14 14 12 15 15
-12 15 15 12 15 15 12 15 15 13 16 16 13 16 16 13 16 16
-13 17 17 13 17 17 14 17 17 32 34 33 43 45 43 43 45 43
-43 45 43 43 45 43 39 40 39 33 36 34 27 29 28 23 24 24
-21 22 21 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 6 7 7 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 1 1 1 68 70 65 184 179 149 210 208 158 251 251 187
-251 251 187 214 212 158 184 179 149 37 39 37 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 6 7 7 105 104 92
-105 104 92 105 104 92 99 98 80 72 73 67 58 59 55 46 47 45
-35 37 36 30 32 31 25 27 26 20 23 23 16 19 19 14 17 17
-12 15 15 12 14 14 11 13 13 10 13 13 10 12 12 10 12 12
-10 12 12 10 12 12 9 12 12 9 12 12 9 12 12 9 12 12
-10 12 12 10 12 12 10 12 12 10 12 12 10 12 12 10 13 13
-10 13 13 10 13 13 11 13 13 11 13 13 11 14 14 11 14 14
-11 14 14 12 15 15 12 15 15 12 15 15 12 15 15 13 16 16
-13 16 16 13 16 16 17 20 20 41 42 42 46 47 45 46 47 45
-46 47 45 43 45 43 40 41 39 33 36 34 27 29 28 23 24 24
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 4 5 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-15 15 15 110 109 94 197 193 154 214 212 158 251 251 187 251 251 187
-239 239 170 184 179 149 84 83 72 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 47 48 46 105 104 92
-105 104 92 99 98 80 84 83 72 68 70 65 51 52 50 40 43 41
-32 34 33 27 29 28 22 24 23 17 21 21 15 18 18 13 16 16
-12 15 15 11 13 13 10 13 13 10 12 12 9 12 12 9 12 12
-9 12 12 9 12 12 9 11 11 9 11 11 9 11 11 9 11 11
-9 12 12 9 12 12 9 12 12 9 12 12 10 12 12 10 12 12
-10 12 12 10 12 12 10 13 13 10 13 13 10 13 13 11 13 13
-11 14 14 11 14 14 11 14 14 12 14 14 12 15 15 12 15 15
-12 15 15 13 16 16 28 31 30 43 45 43 47 48 46 47 48 46
-47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23
-20 20 20 17 17 17 15 15 15 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 3 4 4 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 60 60 56
-177 172 135 197 193 154 251 251 187 251 251 187 251 251 187 251 251 187
-184 179 149 110 109 94 3 4 4 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 1 1 1 99 98 80 105 104 92
-99 98 80 87 86 72 84 83 72 63 64 60 46 47 45 35 37 36
-30 32 31 25 27 26 18 22 22 16 19 19 14 17 17 12 15 15
-11 14 14 10 13 13 9 12 12 9 12 12 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 12 12 9 12 12
-9 12 12 10 12 12 10 12 12 10 12 12 10 13 13 10 13 13
-10 13 13 11 13 13 11 14 14 11 14 14 11 14 14 12 15 15
-12 15 15 14 17 17 41 42 42 47 48 46 49 51 48 51 52 50
-47 48 46 43 45 43 40 41 39 33 36 34 27 29 28 22 24 23
-19 20 19 16 16 16 14 14 13 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 2 2 2 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 23 24 24 137 133 100 184 179 149
-210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 184 179 149
-110 109 94 13 13 13 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 30 32 31 105 104 92 99 98 80
-84 83 72 84 83 72 72 73 67 55 57 54 41 42 42 32 34 33
-27 29 28 20 24 24 17 20 20 14 17 17 13 16 16 12 14 14
-10 13 13 10 12 12 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 12 12 9 12 12 10 12 12 10 12 12 10 12 12
-10 13 13 10 13 13 10 13 13 11 13 13 11 14 14 11 14 14
-11 14 14 27 29 28 55 56 53 72 73 67 51 52 50 51 52 50
-49 51 48 43 45 43 39 40 39 32 34 33 26 28 27 21 22 21
-19 20 19 16 16 16 18 19 17 13 13 13 12 12 12 12 12 12
-12 12 12 12 12 12 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 8 8 7 84 83 72 184 179 149 197 193 154 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 184 179 149 145 141 105
-19 20 19 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 14 14 13 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 72 73 67 105 104 92 84 83 72
-72 73 67 84 83 72 68 70 65 49 51 48 39 40 39 30 32 31
-25 27 26 18 22 22 15 18 18 13 16 16 12 15 15 11 13 13
-10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 12 12 9 12 12 9 12 12
-10 12 12 10 12 12 10 12 12 10 13 13 10 13 13 11 13 13
-13 16 16 41 42 42 99 98 80 158 153 112 65 66 61 51 52 50
-49 51 48 43 45 43 39 40 39 31 33 31 25 27 26 21 22 21
-21 22 21 68 70 65 55 56 53 13 13 13 12 12 12 12 12 12
-12 12 12 11 11 11 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3
-63 64 60 158 153 112 184 179 149 210 208 158 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 184 179 149 137 133 100 27 29 28
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-21 22 21 110 109 94 5 6 5 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 13 13 13 105 104 92 90 89 73 72 73 67
-68 70 65 84 83 72 63 64 60 46 47 45 35 37 36 27 29 28
-22 24 23 17 20 20 14 17 17 12 15 15 11 14 14 10 12 12
-10 12 12 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 12 12 9 12 12 10 12 12 10 12 12 10 13 13 10 13 13
-30 32 31 47 48 46 177 172 135 210 208 158 137 133 100 55 56 53
-49 51 48 43 45 43 38 39 37 31 33 31 25 27 26 22 24 23
-110 109 94 184 179 149 63 64 60 13 13 13 12 12 12 12 12 12
-12 12 12 8 9 9 0 0 0 1 1 1 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 21 22 21 105 104 92
-184 179 149 210 208 158 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 251 251 187 184 179 149 145 141 105 23 24 24 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-68 70 65 184 179 149 105 104 92 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 51 52 50 99 98 80 84 83 72 63 64 60
-68 70 65 72 73 67 55 57 54 41 42 42 32 34 33 25 27 26
-20 23 23 16 19 19 13 16 16 12 14 14 10 13 13 10 12 12
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 12 12 9 12 12 10 12 12 17 20 20
-46 47 45 72 73 67 210 208 158 251 251 187 210 208 158 63 64 60
-49 51 48 43 45 43 37 39 37 30 32 31 24 26 24 105 104 92
-210 208 158 197 193 154 47 48 46 13 13 13 12 12 12 12 12 12
-12 12 12 6 7 7 33 36 34 48 49 45 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 8 8 7 23 24 24 55 56 53 110 109 94
-210 208 158 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 184 179 149 110 109 94 20 20 20 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-110 109 94 251 251 187 210 208 158 47 48 46 0 0 0 0 0 0
-0 0 0 1 1 1 90 89 73 90 89 73 72 73 67 55 56 53
-72 73 67 68 70 65 51 52 50 37 39 37 28 31 30 23 25 24
-17 21 21 15 18 18 12 15 15 11 14 14 10 13 13 9 12 12
-9 11 11 9 11 11 9 11 11 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 9 11 11 9 11 11 9 11 11 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 9 12 12 13 16 16 41 42 42
-49 51 48 110 109 94 251 251 187 251 251 187 251 251 187 105 104 92
-49 51 48 43 45 43 35 37 36 30 31 28 47 48 46 197 193 154
-251 251 187 197 193 154 31 33 31 12 12 12 12 12 12 12 12 12
-12 12 12 51 52 50 184 179 149 72 73 67 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 2
-11 11 11 21 22 21 30 32 31 40 41 39 60 60 56 145 141 105
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
-184 179 149 110 109 94 13 13 13 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 4 5 4 61 61 53 48 49 45 3 4 3
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-156 151 111 251 251 187 251 251 187 184 179 149 11 11 11 0 0 0
-0 0 0 26 28 27 99 98 80 84 83 72 60 60 56 43 45 43
-72 73 67 65 66 61 49 51 48 35 37 36 27 29 28 20 24 24
-17 20 20 14 17 17 12 15 15 11 13 13 10 12 12 9 11 11
-9 11 11 9 11 11 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 9 11 11 9 11 11
-9 11 11 9 11 11 9 11 11 11 13 13 37 39 37 47 48 46
-51 52 50 184 179 149 251 251 187 251 251 187 251 251 187 145 141 105
-47 48 46 41 42 42 35 37 36 27 29 28 137 133 100 251 251 187
-251 251 187 197 193 154 19 20 19 12 12 12 12 12 12 12 12 12
-27 29 28 184 179 149 214 212 158 63 64 60 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 6 7 7 16 16 16 24 26 24
-30 32 31 38 39 37 47 48 46 55 57 54 68 70 65 110 109 94
-197 193 154 251 251 187 251 251 187 251 251 187 210 208 158 184 179 149
-105 104 92 8 8 7 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 65 66 61 184 179 149 156 151 111
-30 32 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-168 163 120 251 251 187 251 251 187 251 251 187 110 109 94 0 0 0
-0 0 0 60 60 56 84 83 72 68 70 65 51 52 50 38 39 37
-84 83 72 63 64 60 43 45 43 33 36 34 25 27 26 20 23 22
-15 18 18 13 16 16 12 14 14 10 13 13 9 12 12 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-9 11 11 9 11 11 10 12 12 33 36 34 46 47 45 51 52 50
-72 73 67 210 208 158 251 251 187 251 251 187 251 251 187 177 172 135
-47 48 46 41 42 42 35 37 36 37 39 37 184 179 149 251 251 187
-251 251 187 197 193 154 13 13 13 12 12 12 12 12 12 12 12 12
-110 109 94 251 251 187 251 251 187 37 39 37 0 0 0 0 0 0
-0 0 0 21 22 20 2 2 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-4 5 5 12 12 12 21 22 21 25 27 26 30 32 31 38 39 37
-46 47 45 55 56 53 60 60 56 65 66 61 68 70 65 105 104 92
-110 109 94 197 193 154 210 208 158 197 193 154 184 179 149 84 83 72
-2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 13 13 13 184 179 149 251 251 187
-197 193 154 43 44 41 0 0 0 0 0 0 0 0 0 0 0 0
-145 141 105 251 251 187 251 251 187 251 251 187 214 212 158 43 45 43
-2 2 2 84 83 72 72 73 67 58 59 55 41 42 42 38 39 37
-72 73 67 58 59 55 41 42 42 31 33 31 25 27 26 18 22 22
-14 17 17 12 15 15 12 14 14 10 12 12 9 12 12 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 9 12 12 31 33 31 43 45 43 49 51 48 55 56 53
-110 109 94 251 251 187 251 251 187 251 251 187 251 251 187 168 163 120
-47 48 46 41 42 42 33 36 34 63 64 60 197 193 154 251 251 187
-251 251 187 184 179 149 13 13 13 12 12 12 12 12 12 16 16 16
-197 193 154 251 251 187 239 239 170 20 20 20 0 0 0 2 2 1
-108 107 93 110 109 94 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 4 5 5 11 11 11 18 19 18
-22 24 23 26 28 27 32 34 33 39 40 39 46 47 45 51 52 50
-55 57 54 60 60 56 63 64 60 63 64 60 63 64 60 58 59 55
-63 64 60 99 98 80 145 141 105 137 133 100 43 45 43 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 3 4 3 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 110 109 94 251 251 187
-251 251 187 184 179 149 25 27 26 0 0 0 0 0 0 0 0 0
-99 98 80 251 251 187 251 251 187 251 251 187 251 251 187 156 151 111
-25 27 26 84 83 72 65 66 61 47 48 46 32 34 33 39 40 39
-72 73 67 55 57 54 40 41 39 30 32 31 23 25 24 18 22 22
-14 17 17 12 15 15 11 13 13 10 12 12 9 11 11 9 11 11
-9 11 11 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-9 11 11 28 31 30 41 42 42 47 48 46 55 56 53 58 59 55
-137 133 100 251 251 187 251 251 187 251 251 187 210 208 158 137 133 100
-47 48 46 40 41 39 32 34 33 75 75 61 184 179 149 239 239 170
-251 251 187 177 172 135 13 13 13 12 12 12 12 12 12 43 44 41
-197 193 154 251 251 187 210 208 158 10 10 9 0 0 0 84 83 72
-251 251 187 84 83 72 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
-6 7 7 11 11 11 17 17 17 20 20 20 23 24 24 27 29 28
-32 34 33 38 39 37 43 45 43 47 48 46 51 52 50 55 56 53
-58 59 55 58 59 55 55 57 54 55 56 53 47 48 46 41 42 42
-35 37 36 31 33 31 47 48 46 14 14 13 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 66 65 55 99 98 80 20 20 20
-0 0 0 0 0 0 0 0 0 0 0 0 43 45 43 214 212 158
-251 251 187 251 251 187 145 141 105 3 3 3 0 0 0 0 0 0
-48 49 45 184 179 149 239 239 170 251 251 187 239 239 170 177 172 135
-84 83 72 72 73 67 55 56 53 39 40 39 26 28 27 39 40 39
-68 70 65 51 52 50 39 40 39 28 31 30 22 24 23 17 20 20
-14 17 17 12 14 14 10 13 13 9 11 11 9 11 11 9 11 11
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-27 29 28 40 41 39 46 47 45 51 52 50 55 57 54 63 64 60
-131 127 93 197 193 154 210 208 158 197 193 154 168 163 120 96 95 69
-47 48 46 40 41 39 32 34 33 71 71 57 145 141 105 184 179 149
-184 179 149 131 127 93 13 13 13 12 12 12 12 12 12 48 49 45
-168 163 120 184 179 149 156 151 111 6 7 7 14 14 13 177 172 135
-239 239 170 40 41 39 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 3 3 3 6 7 7 11 11 11 16 16 16
-18 19 18 21 22 21 23 24 24 27 29 28 32 34 33 37 39 37
-41 42 42 43 45 43 47 48 46 51 52 50 51 52 50 51 52 50
-51 52 50 49 51 48 46 47 45 40 41 39 32 34 33 25 27 26
-20 20 20 14 14 13 2 2 2 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 33 36 34 197 193 154 184 179 149
-41 42 42 0 0 0 0 0 0 0 0 0 3 3 3 184 179 149
-251 251 187 251 251 187 184 179 149 48 49 45 0 0 0 0 0 0
-16 17 12 121 119 87 177 172 135 194 189 146 188 184 146 145 141 105
-82 81 62 63 64 60 46 47 45 31 33 31 21 22 21 35 37 36
-68 70 65 51 52 50 37 39 37 27 30 29 22 24 23 17 20 20
-13 16 16 12 14 14 10 13 13 9 11 11 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 25 27 26
-38 39 37 43 45 43 51 52 50 55 56 53 60 60 56 63 64 60
-92 91 72 158 153 112 176 171 126 171 165 117 149 143 98 82 81 62
-44 46 43 38 39 37 30 32 31 71 71 57 131 127 93 160 154 106
-149 143 98 82 81 62 13 13 13 12 12 12 12 12 12 46 47 43
-121 119 87 134 131 96 96 95 69 7 7 6 38 39 37 131 127 93
-145 141 105 12 13 12 0 0 0 1 1 1 3 3 3 6 7 7
-10 10 9 12 12 12 14 14 13 16 16 16 18 19 18 21 22 21
-22 24 23 26 28 27 30 31 28 33 36 34 37 39 37 40 41 39
-41 42 42 43 45 43 46 47 45 46 47 45 46 47 45 43 45 43
-41 42 42 37 39 37 31 33 31 26 28 27 21 22 21 16 16 16
-6 7 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 177 172 135 251 251 187
-197 193 154 27 29 28 0 0 0 0 0 0 0 0 0 110 109 94
-239 239 170 239 239 170 184 179 149 87 86 72 2 2 1 0 0 0
-1 1 1 82 81 62 142 137 94 165 161 109 165 161 109 131 127 93
-75 75 61 55 56 53 37 39 37 25 27 26 19 20 19 32 34 33
-65 66 61 49 51 48 35 37 36 27 29 28 20 23 23 16 19 19
-13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10
-8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 22 24 23 35 37 36
-41 42 42 47 48 46 55 56 53 58 59 55 63 64 60 65 66 61
-71 71 57 131 127 93 160 154 106 160 154 106 142 137 94 82 81 62
-46 47 43 40 41 39 33 36 34 66 65 55 125 122 87 149 143 98
-142 137 94 82 81 62 17 17 17 18 19 17 14 14 13 46 47 43
-118 116 76 125 122 87 96 95 69 16 17 12 71 71 57 103 101 77
-82 81 62 11 11 11 11 11 11 13 13 13 14 14 13 14 14 13
-15 15 15 16 16 16 17 17 17 19 20 19 21 22 21 23 24 24
-26 28 27 27 29 28 31 33 31 33 36 34 35 37 36 38 39 37
-39 40 39 39 40 39 38 39 37 37 39 37 35 37 36 31 33 31
-27 29 28 24 26 24 21 22 21 17 17 17 12 12 12 2 2 2
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 68 70 65 251 251 187
-251 251 187 156 151 111 2 2 1 0 0 0 0 0 0 43 44 41
-177 172 135 184 179 149 158 153 112 103 101 77 19 20 18 0 0 0
-0 0 0 46 47 43 131 127 93 160 154 106 160 154 106 131 127 93
-71 71 57 43 45 43 30 32 31 21 22 21 16 16 16 26 28 27
-63 64 60 47 48 46 35 37 36 26 28 27 20 23 23 16 19 19
-13 16 16 13 13 13 10 12 12 9 11 11 8 10 10 8 10 10
-7 9 9 7 9 9 8 9 9 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 20 20 20 33 36 34 40 41 39
-46 47 45 51 52 50 55 57 54 60 60 56 63 64 60 65 66 61
-66 65 55 118 116 76 151 147 98 165 161 109 151 147 98 121 119 87
-96 95 69 96 95 69 96 95 69 103 101 77 142 137 94 151 147 98
-142 137 94 103 101 77 82 81 62 82 81 62 82 81 62 96 95 69
-131 127 93 142 137 94 103 101 77 46 47 43 96 95 69 118 116 76
-71 71 57 14 14 13 14 14 13 15 15 15 15 15 15 16 16 16
-16 16 16 17 17 17 18 19 18 20 20 20 21 22 21 23 24 24
-25 27 26 27 29 28 30 31 28 30 32 31 31 33 31 31 33 31
-31 33 31 31 33 31 30 31 28 27 29 28 25 27 26 22 24 23
-20 20 20 16 16 16 13 13 13 6 7 7 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-58 59 55 68 70 65 8 8 7 0 0 0 10 10 9 210 208 158
-251 251 187 184 179 149 38 39 37 0 0 0 0 0 0 8 8 7
-103 101 77 149 143 98 149 143 98 118 116 76 40 41 39 25 27 25
-53 55 47 82 81 62 144 139 99 165 161 109 165 161 109 142 137 94
-71 71 57 35 37 36 24 26 24 18 19 18 15 15 15 22 24 23
-63 64 60 46 47 45 33 36 34 26 28 27 20 23 22 17 18 17
-12 15 15 11 13 13 10 12 12 9 11 11 8 10 10 8 10 10
-7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 16 16 16 30 31 28 35 37 36 41 42 42
-47 48 46 55 56 53 58 59 55 63 64 60 65 66 61 65 66 61
-61 61 53 103 101 77 151 147 98 171 165 117 171 165 117 168 163 120
-158 153 112 158 153 112 155 149 109 151 147 98 151 147 98 160 154 106
-151 147 98 149 143 98 142 137 94 149 143 98 149 143 98 149 143 98
-155 149 109 151 147 98 131 127 93 103 101 77 125 122 87 118 116 76
-71 71 57 16 16 16 16 16 16 16 16 16 17 17 17 17 17 17
-17 17 17 17 17 17 18 19 18 19 20 19 20 20 20 21 22 21
-23 24 24 24 26 24 25 27 26 26 28 27 26 28 27 26 28 27
-25 27 26 24 26 24 22 24 23 21 22 21 19 20 19 16 16 16
-14 14 13 8 8 7 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-20 20 20 184 179 149 168 163 120 21 22 21 0 0 0 105 104 92
-177 172 135 145 141 105 71 71 57 0 0 0 0 0 0 0 0 0
-66 65 55 131 127 93 151 147 98 142 137 94 118 116 76 121 119 87
-145 141 105 158 153 112 176 171 126 178 174 128 176 171 126 149 145 103
-96 95 69 31 33 31 21 22 21 16 16 16 14 14 13 18 19 18
-60 60 56 46 47 45 33 36 34 25 27 26 21 22 21 15 18 18
-12 15 15 11 13 13 9 11 11 8 10 10 8 10 10 8 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 9 9
-8 9 9 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 10 12 12 26 28 27 31 33 31 38 39 37 43 45 43
-51 52 50 55 56 53 60 60 56 63 64 60 65 66 61 68 70 65
-63 64 60 96 95 69 158 153 112 178 174 128 188 184 146 194 189 146
-194 189 146 188 184 146 184 181 136 176 171 126 171 165 117 173 167 111
-173 167 111 165 161 109 171 165 117 174 170 121 176 171 126 178 174 128
-178 174 128 174 170 121 160 154 106 149 143 98 149 143 98 125 122 87
-71 71 57 16 16 16 16 16 16 17 17 17 17 17 17 17 17 17
-17 17 17 17 17 17 17 17 17 18 19 18 19 20 19 20 20 20
-21 22 21 21 22 21 21 22 21 22 24 23 21 22 21 21 22 21
-21 22 21 19 20 19 18 19 18 16 16 16 14 14 13 11 11 11
-3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 105 104 92 197 193 154 110 109 94 9 9 8 36 38 35
-121 119 87 131 127 93 96 95 69 18 19 17 30 31 28 66 65 55
-96 95 69 142 137 94 160 154 106 160 154 106 160 154 106 168 163 120
-184 181 136 194 191 148 197 193 154 197 193 154 194 189 146 168 163 120
-125 122 87 46 47 43 18 19 18 15 15 15 13 13 13 14 14 13
-55 57 54 43 45 43 32 34 33 25 27 26 18 22 22 17 17 17
-12 14 14 10 12 12 9 11 11 8 10 10 8 9 9 7 9 9
-6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
-7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 32 34 33 41 42 42 35 37 36 39 40 39 37 39 37
-35 37 36 55 57 54 60 60 56 63 64 60 65 66 61 65 66 61
-61 63 57 115 113 82 168 163 120 194 191 148 204 201 155 210 208 158
-210 208 158 210 208 158 197 193 154 194 189 146 186 182 128 176 171 126
-174 170 121 176 171 126 186 182 128 190 186 136 194 191 148 197 193 154
-197 193 154 188 184 146 181 176 137 174 170 121 165 161 109 142 137 94
-82 81 62 24 26 24 16 16 16 16 16 16 16 16 16 16 16 16
-17 17 17 17 17 17 17 17 17 17 17 17 18 19 18 19 20 19
-19 20 19 19 20 19 20 20 20 19 20 19 19 20 19 18 19 18
-17 17 17 15 15 15 13 13 13 12 12 12 6 7 7 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 17 18 17 137 133 100 115 113 82 53 55 47 19 20 18
-103 101 77 144 139 99 137 133 100 115 113 82 137 133 100 156 151 111
-158 153 112 164 159 111 171 165 117 174 170 121 178 174 128 194 189 146
-204 201 155 214 212 158 214 212 158 214 212 158 210 208 158 188 184 146
-158 153 112 87 86 72 17 17 17 13 13 13 13 13 13 15 15 15
-55 56 53 43 45 43 32 34 33 24 26 24 17 20 20 16 16 16
-12 14 14 10 12 12 8 10 10 8 10 10 7 9 9 6 8 8
-6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 8 9 9 8 10 10
-8 10 10 8 10 10 8 10 10 8 10 10 8 10 10 8 10 10
-8 10 10 110 109 94 84 83 72 49 51 48 26 28 27 8 10 10
-8 9 9 51 52 50 58 59 55 63 64 60 63 64 60 63 64 60
-66 65 55 134 131 96 181 176 137 210 208 158 214 212 158 239 239 170
-239 239 170 224 223 159 210 208 158 204 201 155 194 189 146 186 182 128
-186 182 128 184 181 136 194 189 146 204 201 155 210 208 158 210 208 158
-210 208 158 210 208 158 197 193 154 190 186 136 176 171 126 155 149 109
-118 116 76 36 38 35 15 15 15 16 16 16 16 16 16 16 16 16
-16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 17 17 17
-17 17 17 17 17 17 17 17 17 16 16 16 16 16 16 15 15 15
-13 13 13 12 12 12 8 8 7 2 2 2 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 53 55 47 103 101 77 96 95 69 53 55 47
-103 101 77 158 153 112 177 172 135 184 179 149 188 184 146 197 193 154
-194 189 146 190 186 136 184 181 136 184 181 136 194 189 146 210 208 158
-214 212 158 239 239 170 251 251 187 251 251 187 224 223 159 204 201 155
-177 172 135 121 119 87 30 31 28 13 13 13 12 12 12 39 40 39
-60 60 56 43 45 43 32 34 33 23 25 24 18 19 18 13 16 16
-13 13 13 9 11 11 8 10 10 8 9 9 6 8 8 6 8 8
-6 8 8 6 8 8 6 8 8 6 8 8 6 8 8 7 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
-7 9 9 8 9 9 8 9 9 8 10 10 8 10 10 8 10 10
-14 17 17 197 193 154 158 153 112 55 57 54 7 9 9 7 9 9
-8 10 10 51 52 50 58 59 55 60 60 56 63 64 60 63 64 60
-71 71 57 155 149 109 194 191 148 214 212 158 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 190 186 136
-190 186 136 194 189 146 204 201 155 210 208 158 224 223 159 239 239 170
-239 239 170 224 223 159 210 208 158 204 201 155 190 186 136 164 159 111
-125 122 87 40 41 39 15 15 15 15 15 15 15 15 15 15 15 15
-16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16 16
-16 16 16 16 16 16 15 15 15 14 14 13 13 13 13 12 12 12
-8 9 9 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 21 22 20 96 95 69 125 122 87 121 119 87
-144 139 99 177 172 135 197 193 154 210 208 158 214 212 158 214 212 158
-210 208 158 204 201 155 194 191 148 194 189 146 204 201 155 214 212 158
-239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
-188 184 146 145 141 105 53 55 47 12 12 12 15 15 15 63 64 60
-63 64 60 41 42 42 31 33 31 23 24 24 17 18 17 12 15 15
-11 13 13 9 11 11 8 9 9 7 9 9 6 8 8 6 8 8
-6 7 7 6 7 7 6 8 8 6 8 8 6 8 8 6 8 8
-6 8 8 7 9 9 7 9 9 7 9 9 7 9 9 7 9 9
-7 9 9 7 9 9 7 9 9 7 9 9 7 9 9 8 8 7
-43 45 43 251 251 187 156 151 111 8 10 10 7 9 9 7 9 9
-21 22 21 51 52 50 55 56 53 55 57 54 58 59 55 58 59 55
-75 75 61 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 214 212 158 204 201 155 194 189 146
-190 186 136 197 193 154 210 208 158 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 210 208 158 197 193 154 176 171 126
-125 122 87 36 38 35 14 14 13 14 14 13 15 15 15 15 15 15
-15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15
-15 15 15 14 14 13 13 13 13 12 12 12 10 10 9 3 4 4
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 7 7 5 71 71 57 131 127 93 158 153 112
-177 172 135 197 193 154 214 212 158 239 239 170 251 251 187 251 251 187
-238 237 168 210 208 158 204 201 155 197 193 154 204 201 155 214 212 158
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 214 212 158
-197 193 154 156 151 111 66 65 55 12 12 12 37 39 37 58 59 55
-58 59 55 41 42 42 31 33 31 22 24 23 17 17 17 12 14 14
-10 12 12 8 10 10 6 8 8 6 8 8 6 7 7 6 7 7
-6 7 7 5 7 7 6 7 7 6 7 7 6 8 8 6 8 8
-6 8 8 6 8 8 6 8 8 7 9 9 7 9 9 7 9 9
-7 9 9 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8
-61 63 57 197 193 154 16 19 19 6 8 8 6 8 8 8 9 9
-41 42 42 47 48 46 51 52 50 51 52 50 55 56 53 55 56 53
-71 71 57 158 153 112 197 193 154 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 239 239 170 214 212 158 204 201 155 194 189 146
-190 186 136 197 193 154 210 208 158 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 224 223 159 204 201 155 177 172 135
-121 119 87 30 31 28 13 13 13 14 14 13 14 14 13 14 14 13
-14 14 13 14 14 13 15 15 15 15 15 15 14 14 13 13 13 13
-12 12 12 12 12 12 10 10 9 4 5 5 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 48 49 45 131 127 93 174 170 121
-194 189 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187
-251 251 187 214 212 158 204 201 155 197 193 154 204 201 155 210 208 158
-239 239 170 251 251 187 251 251 187 251 251 187 239 239 170 214 212 158
-194 191 148 156 151 111 71 71 57 19 20 19 51 52 50 51 52 50
-51 52 50 41 42 42 30 32 31 21 22 21 17 17 17 13 13 13
-9 11 11 8 9 9 6 8 8 6 7 7 6 7 7 5 7 7
-5 6 5 5 6 5 5 7 7 5 7 7 6 7 7 6 7 7
-6 8 8 6 8 8 6 8 8 6 7 7 6 7 7 6 7 7
-6 7 7 6 8 8 6 8 8 6 8 8 6 8 8 6 8 8
-55 56 53 43 45 43 6 8 8 6 8 8 6 8 8 47 48 46
-60 60 56 47 48 46 46 47 45 47 48 46 38 39 37 10 12 12
-66 65 55 145 141 105 197 193 154 214 212 158 251 251 187 251 251 187
-251 251 187 251 251 187 224 223 159 210 208 158 194 191 148 184 181 136
-184 181 136 194 189 146 204 201 155 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 181 176 137
-115 113 82 21 22 20 13 13 13 13 13 13 13 13 13 13 13 13
-14 14 13 13 13 13 13 13 13 13 13 13 12 12 12 11 11 11
-10 10 9 6 7 7 1 1 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 2 2 1 66 65 55 144 139 99 178 174 128
-204 201 155 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 214 212 158 204 201 155 194 191 148 197 193 154 204 201 155
-214 212 158 239 239 170 239 239 170 239 239 170 214 212 158 210 208 158
-184 181 136 149 145 103 66 65 55 41 42 42 47 48 46 46 47 45
-43 45 43 39 40 39 28 31 30 21 22 21 16 16 16 10 12 12
-8 10 10 6 8 8 6 7 7 6 7 7 5 6 5 5 6 5
-5 6 5 5 6 5 5 6 5 5 6 5 5 7 7 5 7 7
-6 7 7 6 7 7 6 7 7 5 7 7 5 7 7 5 7 7
-5 7 7 6 7 7 6 7 7 6 7 7 6 7 7 6 8 8
-6 8 8 6 8 8 6 7 7 6 7 7 46 47 45 156 151 111
-105 104 92 58 59 55 43 45 43 32 34 33 6 8 8 6 8 8
-49 51 48 125 122 87 181 176 137 204 201 155 214 212 158 239 239 170
-239 239 170 214 212 158 210 208 158 197 193 154 181 176 137 176 171 126
-176 171 126 184 181 136 197 193 154 210 208 158 239 239 170 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135
-99 98 80 13 13 13 12 12 12 12 12 12 13 13 13 12 12 12
-12 12 12 12 12 12 11 11 11 11 11 11 8 9 9 4 5 5
-1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 1 1 0 61 61 53 142 137 94 181 176 137
-204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187
-251 251 187 214 212 158 197 193 154 190 186 136 184 181 136 188 184 146
-197 193 154 204 201 155 210 208 158 210 208 158 204 201 155 194 189 146
-176 171 126 134 131 96 66 65 55 43 45 43 41 42 42 39 40 39
-35 37 36 33 36 34 27 29 28 20 20 20 15 15 15 9 11 11
-8 9 9 6 7 7 5 6 5 5 6 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 5 6 5 4 5 5
-4 5 5 5 6 5 4 5 5 5 6 5 5 6 5 5 6 5
-5 7 7 5 7 7 5 7 7 5 7 7 5 7 7 5 7 7
-6 7 7 6 7 7 6 7 7 28 31 30 184 179 149 184 179 149
-145 141 105 84 83 72 27 29 28 5 7 7 5 6 5 16 16 16
-43 44 41 96 95 69 158 153 112 188 184 146 204 201 155 210 208 158
-204 201 155 197 193 154 184 179 149 177 172 135 168 163 120 164 159 111
-164 159 111 174 170 121 184 181 136 197 193 154 214 212 158 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 210 208 158 177 172 135
-71 71 57 11 11 11 12 12 12 11 11 11 11 11 11 11 11 11
-10 10 9 10 10 9 8 8 7 3 4 4 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 31 33 31 121 119 87 176 171 126
-197 193 154 214 212 158 251 251 187 251 251 187 251 251 187 251 251 187
-239 239 170 210 208 158 194 189 146 178 174 128 174 170 121 176 171 126
-177 172 135 181 176 137 184 179 149 184 179 149 181 176 137 178 174 128
-158 153 112 121 119 87 53 55 47 37 39 37 33 36 34 30 32 31
-27 29 28 25 27 26 24 26 24 19 20 19 13 13 13 8 10 10
-6 8 8 6 7 7 5 6 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 3 4 4 3 4 4 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-5 6 5 5 6 5 5 6 5 5 6 5 5 6 5 5 6 5
-5 6 5 5 6 5 12 14 14 145 141 105 184 179 149 177 172 135
-90 89 73 21 22 21 5 6 5 5 6 5 4 5 5 37 39 37
-38 39 37 61 61 53 134 131 96 168 163 120 184 181 136 188 184 146
-184 179 149 177 172 135 168 163 120 164 159 111 155 149 109 151 147 98
-151 147 98 164 159 111 176 171 126 184 179 149 210 208 158 239 239 170
-251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 158 153 112
-46 47 43 10 10 9 10 10 9 10 10 9 8 9 9 8 9 9
-6 7 7 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 13 12 7 82 81 62 158 153 112
-188 184 146 210 208 158 239 239 170 251 251 187 251 251 187 251 251 187
-224 223 159 204 201 155 184 181 136 171 165 117 164 159 111 160 154 106
-158 153 112 164 159 111 168 163 120 168 163 120 168 163 120 164 159 111
-142 137 94 96 95 69 43 44 41 27 29 28 26 28 27 23 24 24
-21 22 21 18 19 18 17 17 17 18 19 18 13 13 13 8 8 7
-6 7 7 5 6 5 4 5 5 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 3 3 3 3 3 3 4 4 3 4 4
-3 4 4 3 4 4 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 4 5 5 4 5 5 4 5 5 31 33 31 65 66 61
-37 39 37 38 39 37 96 95 69 144 139 99 168 163 120 174 170 121
-168 163 120 164 159 111 155 149 109 149 145 103 149 143 98 142 137 94
-149 143 98 151 147 98 164 159 111 177 172 135 197 193 154 210 208 158
-251 251 187 251 251 187 251 251 187 239 239 170 197 193 154 137 133 100
-24 26 24 8 9 9 8 9 9 8 8 7 6 7 7 2 2 2
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 46 47 43 125 122 87
-176 171 126 197 193 154 210 208 158 239 239 170 251 251 187 239 239 170
-214 212 158 197 193 154 181 176 137 164 159 111 151 147 98 149 143 98
-149 143 98 149 143 98 149 145 103 155 149 109 160 154 106 149 143 98
-118 116 76 82 81 62 30 31 28 21 22 21 19 20 19 17 17 17
-14 14 13 12 12 12 10 10 9 12 12 12 10 12 12 6 8 8
-4 5 5 3 4 4 3 4 4 3 4 4 3 3 3 3 3 3
-3 3 3 3 3 3 3 3 3 3 3 3 2 3 3 2 3 3
-3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 4 5 5
-4 5 5 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4
-4 5 5 4 5 5 4 5 5 4 5 5 4 5 5 4 5 5
-4 5 5 3 4 4 3 4 4 23 24 24 110 109 94 72 73 67
-39 40 39 22 24 23 46 47 43 103 101 77 142 137 94 155 149 109
-160 154 106 155 149 109 149 143 98 142 137 94 142 137 94 142 137 94
-142 137 94 149 143 98 155 149 109 176 171 126 184 179 149 210 208 158
-239 239 170 251 251 187 251 251 187 214 212 158 184 179 149 105 104 92
-10 10 9 6 7 7 3 4 4 1 1 1 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 12 12 9 82 81 62
-149 145 103 181 176 137 197 193 154 210 208 158 214 212 158 214 212 158
-210 208 158 197 193 154 177 172 135 158 153 112 149 143 98 142 137 94
-142 137 94 142 137 94 149 143 98 151 147 98 151 147 98 131 127 93
-103 101 77 71 71 57 22 24 23 15 15 15 13 13 13 11 11 11
-8 9 9 6 7 7 6 7 7 4 5 5 8 9 9 6 7 7
-4 5 5 3 3 3 3 3 3 3 3 3 3 3 3 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3
-2 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 3 3 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 4 4 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 21 22 21 145 141 105 145 141 105 72 73 67
-17 18 17 3 4 4 21 22 20 66 65 55 118 116 76 142 137 94
-149 143 98 151 147 98 149 143 98 142 137 94 142 137 94 142 137 94
-142 137 94 149 143 98 155 149 109 168 163 120 184 179 149 210 208 158
-239 239 170 251 251 187 251 251 187 210 208 158 177 172 135 71 71 57
-3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 38 35
-115 113 82 158 153 112 181 176 137 197 193 154 204 201 155 210 208 158
-204 201 155 188 184 146 177 172 135 164 159 111 149 145 103 142 137 94
-142 137 94 142 137 94 149 143 98 151 147 98 149 143 98 125 122 87
-96 95 69 61 61 53 16 17 12 8 9 9 8 8 7 6 7 7
-4 5 5 3 4 4 3 3 3 3 3 3 3 3 3 5 6 5
-3 4 4 2 3 3 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 2 2
-2 2 2 2 2 2 2 3 3 2 3 3 2 3 3 2 3 3
-3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3
-3 3 3 2 3 3 2 3 3 3 4 4 3 4 4 3 4 4
-3 4 4 3 4 4 3 4 4 8 9 9 8 8 7 3 3 3
-3 3 3 3 3 3 9 9 8 36 38 35 82 81 62 118 116 76
-142 137 94 151 147 98 151 147 98 151 147 98 149 143 98 149 143 98
-149 143 98 151 147 98 160 154 106 176 171 126 188 184 146 210 208 158
-239 239 170 251 251 187 239 239 170 210 208 158 156 151 111 31 33 31
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5
-66 65 55 125 122 87 158 153 112 181 176 137 194 189 146 197 193 154
-197 193 154 184 179 149 177 172 135 168 163 120 156 151 111 151 147 98
-151 147 98 151 147 98 151 147 98 161 156 96 149 143 98 118 116 76
-82 81 62 53 55 47 12 12 9 4 5 5 3 4 4 3 3 3
-3 3 3 3 3 3 2 2 2 2 2 2 1 1 1 1 2 2
-3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2
-1 2 2 1 2 2 1 2 2 2 2 2 2 2 2 2 3 3
-2 3 3 2 3 3 2 3 3 2 3 3 2 2 2 2 2 2
-2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3
-2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 3 3 3
-3 3 3 3 3 3 72 73 67 61 61 53 53 55 47 96 95 69
-131 127 93 151 147 98 161 156 96 161 156 96 151 147 98 151 147 98
-161 156 96 160 154 106 164 159 111 177 172 135 197 193 154 210 208 158
-239 239 170 251 251 187 224 223 159 197 193 154 131 127 93 9 9 8
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-24 26 24 82 81 62 131 127 93 164 159 111 178 174 128 188 184 146
-188 184 146 188 184 146 181 176 137 176 171 126 168 163 120 164 159 111
-160 154 106 160 154 106 160 154 106 160 154 106 151 147 98 125 122 87
-82 81 62 61 61 53 12 12 9 3 3 3 3 3 3 2 2 2
-2 2 2 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
-0 0 0 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 2 2 1 2 2 1 2 2 1 2 2
-1 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 3 3 2 3 3 2 3 3 2 3 3 2 3 3 2 3 3
-2 3 3 30 32 31 72 73 67 31 33 31 36 38 35 82 81 62
-118 116 76 149 143 98 161 156 96 161 156 96 161 156 96 160 154 106
-165 161 109 165 161 109 176 171 126 188 184 146 204 201 155 214 212 158
-239 239 170 239 239 170 214 212 158 184 179 149 82 81 62 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-2 2 2 43 44 41 96 95 69 131 127 93 160 154 106 176 171 126
-184 181 136 184 181 136 184 181 136 181 176 137 178 174 128 174 170 121
-171 165 117 173 167 111 173 167 111 173 167 111 160 154 106 131 127 93
-96 95 69 66 65 55 16 17 12 2 2 2 1 1 1 1 1 1
-1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 10 9 6 30 31 28 71 71 57
-118 116 76 149 143 98 165 161 109 165 161 109 165 161 109 173 167 111
-173 167 111 176 171 126 184 181 136 197 193 154 210 208 158 224 223 159
-251 251 187 239 239 170 210 208 158 168 163 120 40 41 39 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 13 12 7 61 61 53 96 95 69 131 127 93 160 154 106
-176 171 126 184 181 136 184 181 136 188 184 146 184 181 136 184 181 136
-184 181 136 186 182 128 186 182 128 178 174 128 174 170 121 149 145 103
-118 116 76 82 81 62 21 22 20 1 1 1 1 1 1 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2
-1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2
-2 2 2 2 2 2 2 2 2 3 3 3 30 31 28 66 65 55
-118 116 76 149 143 98 165 161 109 173 167 111 173 167 111 174 170 121
-186 182 128 190 186 136 197 193 154 210 208 158 224 223 159 251 251 187
-251 251 187 239 239 170 197 193 154 137 133 100 12 12 9 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 30 31 28 71 71 57 103 101 77 134 131 96
-164 159 111 176 171 126 184 181 136 188 184 146 194 189 146 197 193 154
-197 193 154 197 193 154 194 191 148 194 189 146 190 186 136 176 171 126
-145 141 105 103 101 77 40 41 39 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 1 2 2
-1 2 2 1 2 2 1 2 2 1 2 2 1 2 2 1 2 2
-1 2 2 1 2 2 1 2 2 1 2 2 30 31 28 71 71 57
-118 116 76 160 154 106 173 167 111 178 174 128 186 182 128 190 186 136
-194 191 148 204 201 155 210 208 158 224 223 159 251 251 187 251 251 187
-251 251 187 214 212 158 184 179 149 84 83 72 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 5 5 3 43 44 41 82 81 62 103 101 77
-142 137 94 165 161 109 178 174 128 190 186 136 197 193 154 204 201 155
-210 208 158 210 208 158 210 208 158 210 208 158 210 208 158 197 193 154
-177 172 135 145 141 105 79 78 62 5 4 3 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 2 2 1 2 2 30 31 28 82 81 62
-142 137 94 165 161 109 178 174 128 190 186 136 194 191 148 204 201 155
-210 208 158 214 212 158 239 239 170 251 251 187 251 251 187 251 251 187
-251 251 187 210 208 158 168 163 120 36 38 35 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 16 17 12 53 55 47 82 81 62
-118 116 76 151 147 98 171 165 117 184 181 136 194 191 148 210 208 158
-214 212 158 224 223 159 239 239 170 239 239 170 224 223 159 214 212 158
-197 193 154 176 171 126 115 113 82 24 26 24 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 40 41 39 103 101 77
-151 147 98 176 171 126 190 186 136 197 193 154 210 208 158 214 212 158
-239 239 170 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-239 239 170 197 193 154 110 109 94 3 4 3 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 30 31 28 66 65 55
-96 95 69 125 122 87 160 154 106 178 174 128 194 189 146 204 201 155
-214 212 158 239 239 170 251 251 187 251 251 187 251 251 187 239 239 170
-210 208 158 188 184 146 149 145 103 61 61 53 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 61 61 53 131 127 93
-164 159 111 184 181 136 197 193 154 210 208 158 224 223 159 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 251 251 187
-210 208 158 168 163 120 43 44 41 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 4 3 2 36 38 35
-71 71 57 96 95 69 142 137 94 165 161 109 184 181 136 197 193 154
-210 208 158 239 239 170 251 251 187 251 251 187 251 251 187 251 251 187
-214 212 158 197 193 154 168 163 120 103 101 77 7 7 5 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-1 1 1 0 0 0 0 0 0 0 0 0 82 81 62 142 137 94
-174 170 121 194 189 146 210 208 158 224 223 159 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 251 251 187 224 223 159
-184 179 149 99 98 80 3 3 3 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 7 7 5
-43 44 41 82 81 62 118 116 76 142 137 94 171 165 117 190 186 136
-204 201 155 224 223 159 251 251 187 251 251 187 251 251 187 251 251 187
-214 212 158 197 193 154 174 170 121 125 122 87 30 31 28 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
-1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 3 4 3 82 81 62 149 143 98
-176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 251 251 187 239 239 170 204 201 155
-145 141 105 30 31 28 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-10 9 6 46 47 43 82 81 62 118 116 76 149 143 98 174 170 121
-194 189 146 210 208 158 224 223 159 251 251 187 251 251 187 224 223 159
-210 208 158 194 191 148 174 170 121 134 131 96 53 55 47 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98
-176 171 126 194 191 148 210 208 158 239 239 170 251 251 187 251 251 187
-251 251 187 251 251 187 251 251 187 239 239 170 210 208 158 177 172 135
-75 75 61 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 10 9 6 46 47 43 82 81 62 118 116 76 149 143 98
-176 171 126 194 191 148 210 208 158 214 212 158 214 212 158 210 208 158
-197 193 154 184 181 136 164 159 111 131 127 93 53 55 47 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 7 7 5 96 95 69 149 143 98
-174 170 121 194 189 146 204 201 155 214 212 158 239 239 170 251 251 187
-251 251 187 251 251 187 239 239 170 210 208 158 184 179 149 110 109 94
-12 12 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 10 9 6 43 44 41 82 81 62 115 113 82
-144 139 99 168 163 120 188 184 146 197 193 154 197 193 154 194 189 146
-184 181 136 174 170 121 151 147 98 118 116 76 36 38 35 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 4 3 2 82 81 62 142 137 94
-171 165 117 186 182 128 194 191 148 210 208 158 214 212 158 224 223 159
-239 239 170 224 223 159 210 208 158 184 179 149 137 133 100 36 38 35
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 7 7 5 36 38 35 71 71 57
-103 101 77 131 127 93 155 149 109 168 163 120 168 163 120 168 163 120
-164 159 111 149 143 98 125 122 87 82 81 62 13 12 7 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 61 61 53 125 122 87
-160 154 106 174 170 121 184 181 136 194 189 146 204 201 155 210 208 158
-210 208 158 204 201 155 184 179 149 145 141 105 61 61 53 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 3 3 2 30 31 28
-61 61 53 82 81 62 103 101 77 121 119 87 125 122 87 125 122 87
-118 116 76 103 101 77 79 78 62 24 26 24 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 25 27 25 96 95 69
-142 137 94 160 154 106 171 165 117 178 174 128 184 181 136 184 181 136
-181 176 137 177 172 135 145 141 105 75 75 61 5 5 3 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-16 17 12 40 41 39 61 61 53 71 71 57 71 71 57 71 71 57
-66 65 55 43 44 41 12 12 9 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 46 47 43
-96 95 69 125 122 87 142 137 94 149 145 103 155 149 109 155 149 109
-145 141 105 121 119 87 66 65 55 7 7 5 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 1 1 1 16 17 12 24 26 24 25 27 25 19 20 18
-7 7 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 2 1
-25 27 25 61 61 53 82 81 62 96 95 69 96 95 69 82 81 62
-61 61 53 25 27 25 2 2 1 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 5 6 5 13 12 7 10 9 6 3 4 3
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 6 6 6 10 10 10 10 10 10
+ 10 10 10 6 6 6 6 6 6 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 10 10 10 14 14 14
+ 22 22 22 26 26 26 30 30 30 34 34 34
+ 30 30 30 30 30 30 26 26 26 18 18 18
+ 14 14 14 10 10 10 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 26 26 26 42 42 42
+ 54 54 54 66 66 66 78 78 78 78 78 78
+ 78 78 78 74 74 74 66 66 66 54 54 54
+ 42 42 42 26 26 26 18 18 18 10 10 10
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 22 22 22 42 42 42 66 66 66 86 86 86
+ 66 66 66 38 38 38 38 38 38 22 22 22
+ 26 26 26 34 34 34 54 54 54 66 66 66
+ 86 86 86 70 70 70 46 46 46 26 26 26
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 26 26 26
+ 50 50 50 82 82 82 58 58 58 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 54 54 54 86 86 86 66 66 66
+ 38 38 38 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 22 22 22 50 50 50
+ 78 78 78 34 34 34 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 6 6 6 70 70 70
+ 78 78 78 46 46 46 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 42 42 42 82 82 82
+ 26 26 26 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 14 14 14
+ 46 46 46 34 34 34 6 6 6 2 2 6
+ 42 42 42 78 78 78 42 42 42 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 10 10 10 30 30 30 66 66 66 58 58 58
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 26 26 26
+ 86 86 86 101 101 101 46 46 46 10 10 10
+ 2 2 6 58 58 58 70 70 70 34 34 34
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 14 14 14 42 42 42 86 86 86 10 10 10
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 30 30 30
+ 94 94 94 94 94 94 58 58 58 26 26 26
+ 2 2 6 6 6 6 78 78 78 54 54 54
+ 22 22 22 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 22 22 22 62 62 62 62 62 62 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 26 26 26
+ 54 54 54 38 38 38 18 18 18 10 10 10
+ 2 2 6 2 2 6 34 34 34 82 82 82
+ 38 38 38 14 14 14 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 30 30 30 78 78 78 30 30 30 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 10 10 10
+ 10 10 10 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 78 78 78
+ 50 50 50 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 86 86 86 14 14 14 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 54 54 54
+ 66 66 66 26 26 26 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 82 82 82 2 2 6 2 2 6
+ 2 2 6 6 6 6 10 10 10 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 6 6 6
+ 14 14 14 10 10 10 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 18 18 18
+ 82 82 82 34 34 34 10 10 10 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 2 2 6
+ 6 6 6 6 6 6 22 22 22 34 34 34
+ 6 6 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 18 18 18 34 34 34
+ 10 10 10 50 50 50 22 22 22 2 2 6
+ 2 2 6 2 2 6 2 2 6 10 10 10
+ 86 86 86 42 42 42 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 2 2 6
+ 38 38 38 116 116 116 94 94 94 22 22 22
+ 22 22 22 2 2 6 2 2 6 2 2 6
+ 14 14 14 86 86 86 138 138 138 162 162 162
+154 154 154 38 38 38 26 26 26 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 86 86 86 46 46 46 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 14 14 14
+134 134 134 198 198 198 195 195 195 116 116 116
+ 10 10 10 2 2 6 2 2 6 6 6 6
+101 98 89 187 187 187 210 210 210 218 218 218
+214 214 214 134 134 134 14 14 14 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 86 86 86 50 50 50 18 18 18 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 86 86 86 2 2 6 54 54 54
+218 218 218 195 195 195 226 226 226 246 246 246
+ 58 58 58 2 2 6 2 2 6 30 30 30
+210 210 210 253 253 253 174 174 174 123 123 123
+221 221 221 234 234 234 74 74 74 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 70 70 70 58 58 58 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 46 46 46 82 82 82 2 2 6 106 106 106
+170 170 170 26 26 26 86 86 86 226 226 226
+123 123 123 10 10 10 14 14 14 46 46 46
+231 231 231 190 190 190 6 6 6 70 70 70
+ 90 90 90 238 238 238 158 158 158 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 70 70 70 58 58 58 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 0
+ 0 0 1 0 0 1 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 86 86 86 6 6 6 116 116 116
+106 106 106 6 6 6 70 70 70 149 149 149
+128 128 128 18 18 18 38 38 38 54 54 54
+221 221 221 106 106 106 2 2 6 14 14 14
+ 46 46 46 190 190 190 198 198 198 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 74 74 74 62 62 62 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 0
+ 0 0 1 0 0 0 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 94 94 94 14 14 14 101 101 101
+128 128 128 2 2 6 18 18 18 116 116 116
+118 98 46 121 92 8 121 92 8 98 78 10
+162 162 162 106 106 106 2 2 6 2 2 6
+ 2 2 6 195 195 195 195 195 195 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 74 74 74 62 62 62 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 1 0 0 1
+ 0 0 1 0 0 0 0 0 1 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 90 90 90 14 14 14 58 58 58
+210 210 210 26 26 26 54 38 6 154 114 10
+226 170 11 236 186 11 225 175 15 184 144 12
+215 174 15 175 146 61 37 26 9 2 2 6
+ 70 70 70 246 246 246 138 138 138 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 70 70 70 66 66 66 26 26 26 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 86 86 86 14 14 14 10 10 10
+195 195 195 188 164 115 192 133 9 225 175 15
+239 182 13 234 190 10 232 195 16 232 200 30
+245 207 45 241 208 19 232 195 16 184 144 12
+218 194 134 211 206 186 42 42 42 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 50 50 50 74 74 74 30 30 30 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 34 34 34 86 86 86 14 14 14 2 2 6
+121 87 25 192 133 9 219 162 10 239 182 13
+236 186 11 232 195 16 241 208 19 244 214 54
+246 218 60 246 218 38 246 215 20 241 208 19
+241 208 19 226 184 13 121 87 25 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 50 50 50 82 82 82 34 34 34 10 10 10
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 34 34 34 82 82 82 30 30 30 61 42 6
+180 123 7 206 145 10 230 174 11 239 182 13
+234 190 10 238 202 15 241 208 19 246 218 74
+246 218 38 246 215 20 246 215 20 246 215 20
+226 184 13 215 174 15 184 144 12 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 26 26 26 94 94 94 42 42 42 14 14 14
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 50 50 50 104 69 6
+192 133 9 216 158 10 236 178 12 236 186 11
+232 195 16 241 208 19 244 214 54 245 215 43
+246 215 20 246 215 20 241 208 19 198 155 10
+200 144 11 216 158 10 156 118 10 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 90 90 90 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 46 46 46 22 22 22
+137 92 6 210 162 10 239 182 13 238 190 10
+238 202 15 241 208 19 246 215 20 246 215 20
+241 208 19 203 166 17 185 133 11 210 150 10
+216 158 10 210 150 10 102 78 10 2 2 6
+ 6 6 6 54 54 54 14 14 14 2 2 6
+ 2 2 6 62 62 62 74 74 74 30 30 30
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 34 34 34 78 78 78 50 50 50 6 6 6
+ 94 70 30 139 102 15 190 146 13 226 184 13
+232 200 30 232 195 16 215 174 15 190 146 13
+168 122 10 192 133 9 210 150 10 213 154 11
+202 150 34 182 157 106 101 98 89 2 2 6
+ 2 2 6 78 78 78 116 116 116 58 58 58
+ 2 2 6 22 22 22 90 90 90 46 46 46
+ 18 18 18 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 86 86 86 50 50 50 6 6 6
+128 128 128 174 154 114 156 107 11 168 122 10
+198 155 10 184 144 12 197 138 11 200 144 11
+206 145 10 206 145 10 197 138 11 188 164 115
+195 195 195 198 198 198 174 174 174 14 14 14
+ 2 2 6 22 22 22 116 116 116 116 116 116
+ 22 22 22 2 2 6 74 74 74 70 70 70
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 101 101 101 26 26 26 10 10 10
+138 138 138 190 190 190 174 154 114 156 107 11
+197 138 11 200 144 11 197 138 11 192 133 9
+180 123 7 190 142 34 190 178 144 187 187 187
+202 202 202 221 221 221 214 214 214 66 66 66
+ 2 2 6 2 2 6 50 50 50 62 62 62
+ 6 6 6 2 2 6 10 10 10 90 90 90
+ 50 50 50 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 34 34 34
+ 74 74 74 74 74 74 2 2 6 6 6 6
+144 144 144 198 198 198 190 190 190 178 166 146
+154 121 60 156 107 11 156 107 11 168 124 44
+174 154 114 187 187 187 190 190 190 210 210 210
+246 246 246 253 253 253 253 253 253 182 182 182
+ 6 6 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 62 62 62
+ 74 74 74 34 34 34 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 10 10 10 22 22 22 54 54 54
+ 94 94 94 18 18 18 2 2 6 46 46 46
+234 234 234 221 221 221 190 190 190 190 190 190
+190 190 190 187 187 187 187 187 187 190 190 190
+190 190 190 195 195 195 214 214 214 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+ 82 82 82 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 14 14 14
+ 86 86 86 54 54 54 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 46 46 46 90 90 90
+ 46 46 46 18 18 18 6 6 6 182 182 182
+253 253 253 246 246 246 206 206 206 190 190 190
+190 190 190 190 190 190 190 190 190 190 190 190
+206 206 206 231 231 231 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+202 202 202 14 14 14 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 42 42 42 86 86 86 42 42 42 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 14 14 14 38 38 38 74 74 74 66 66 66
+ 2 2 6 6 6 6 90 90 90 250 250 250
+253 253 253 253 253 253 238 238 238 198 198 198
+190 190 190 190 190 190 195 195 195 221 221 221
+246 246 246 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 82 82 82 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 78 78 78 70 70 70 34 34 34
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 34 34 34 66 66 66 78 78 78 6 6 6
+ 2 2 6 18 18 18 218 218 218 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+226 226 226 231 231 231 246 246 246 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 178 178 178 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 18 18 18 90 90 90 62 62 62
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 26 26 26
+ 58 58 58 90 90 90 18 18 18 2 2 6
+ 2 2 6 110 110 110 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 231 231 231 18 18 18 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 18 18 18 94 94 94
+ 54 54 54 26 26 26 10 10 10 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 22 22 22 50 50 50
+ 90 90 90 26 26 26 2 2 6 2 2 6
+ 14 14 14 195 195 195 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 242 242 242 54 54 54 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 38 38 38
+ 86 86 86 50 50 50 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 38 38 38 82 82 82
+ 34 34 34 2 2 6 2 2 6 2 2 6
+ 42 42 42 195 195 195 246 246 246 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 242 242 242 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 246 246 246 238 238 238
+226 226 226 231 231 231 101 101 101 6 6 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 38 38 38 82 82 82 42 42 42 14 14 14
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 10 10 10 26 26 26 62 62 62 66 66 66
+ 2 2 6 2 2 6 2 2 6 6 6 6
+ 70 70 70 170 170 170 206 206 206 234 234 234
+246 246 246 250 250 250 250 250 250 238 238 238
+226 226 226 231 231 231 238 238 238 250 250 250
+250 250 250 250 250 250 246 246 246 231 231 231
+214 214 214 206 206 206 202 202 202 202 202 202
+198 198 198 202 202 202 182 182 182 18 18 18
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 62 62 62 66 66 66 30 30 30
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 14 14 14 42 42 42 82 82 82 18 18 18
+ 2 2 6 2 2 6 2 2 6 10 10 10
+ 94 94 94 182 182 182 218 218 218 242 242 242
+250 250 250 253 253 253 253 253 253 250 250 250
+234 234 234 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+238 238 238 226 226 226 210 210 210 202 202 202
+195 195 195 195 195 195 210 210 210 158 158 158
+ 6 6 6 14 14 14 50 50 50 14 14 14
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 86 86 86 46 46 46
+ 18 18 18 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 22 22 22 54 54 54 70 70 70 2 2 6
+ 2 2 6 10 10 10 2 2 6 22 22 22
+166 166 166 231 231 231 250 250 250 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 246 246
+231 231 231 206 206 206 198 198 198 226 226 226
+ 94 94 94 2 2 6 6 6 6 38 38 38
+ 30 30 30 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 62 62 62 66 66 66
+ 26 26 26 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 74 74 74 50 50 50 2 2 6
+ 26 26 26 26 26 26 2 2 6 106 106 106
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 246 246 246 218 218 218 202 202 202
+210 210 210 14 14 14 2 2 6 2 2 6
+ 30 30 30 22 22 22 2 2 6 2 2 6
+ 2 2 6 2 2 6 18 18 18 86 86 86
+ 42 42 42 14 14 14 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 42 42 42 90 90 90 22 22 22 2 2 6
+ 42 42 42 2 2 6 18 18 18 218 218 218
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 250 250 250 221 221 221
+218 218 218 101 101 101 2 2 6 14 14 14
+ 18 18 18 38 38 38 10 10 10 2 2 6
+ 2 2 6 2 2 6 2 2 6 78 78 78
+ 58 58 58 22 22 22 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 54 54 54 82 82 82 2 2 6 26 26 26
+ 22 22 22 2 2 6 123 123 123 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+238 238 238 198 198 198 6 6 6 38 38 38
+ 58 58 58 26 26 26 38 38 38 2 2 6
+ 2 2 6 2 2 6 2 2 6 46 46 46
+ 78 78 78 30 30 30 10 10 10 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 10 10 10 30 30 30
+ 74 74 74 58 58 58 2 2 6 42 42 42
+ 2 2 6 22 22 22 231 231 231 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 246 246 246 46 46 46 38 38 38
+ 42 42 42 14 14 14 38 38 38 14 14 14
+ 2 2 6 2 2 6 2 2 6 6 6 6
+ 86 86 86 46 46 46 14 14 14 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 14 14 14 42 42 42
+ 90 90 90 18 18 18 18 18 18 26 26 26
+ 2 2 6 116 116 116 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 250 250 250 238 238 238
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 94 94 94 6 6 6
+ 2 2 6 2 2 6 10 10 10 34 34 34
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 74 74 74 58 58 58 22 22 22 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 10 10 10 26 26 26 66 66 66
+ 82 82 82 2 2 6 38 38 38 6 6 6
+ 14 14 14 210 210 210 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 246 246 246 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 144 144 144 2 2 6
+ 2 2 6 2 2 6 2 2 6 46 46 46
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 42 42 42 74 74 74 30 30 30 10 10 10
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 42 42 42 90 90 90
+ 26 26 26 6 6 6 42 42 42 2 2 6
+ 74 74 74 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 242 242 242 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 182 182 182 2 2 6
+ 2 2 6 2 2 6 2 2 6 46 46 46
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 10 10 10 86 86 86 38 38 38 10 10 10
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 10 10 10 26 26 26 66 66 66 82 82 82
+ 2 2 6 22 22 22 18 18 18 2 2 6
+149 149 149 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 206 206 206 2 2 6
+ 2 2 6 2 2 6 2 2 6 38 38 38
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 86 86 86 46 46 46 14 14 14
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 18 18 18 46 46 46 86 86 86 18 18 18
+ 2 2 6 34 34 34 10 10 10 6 6 6
+210 210 210 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 221 221 221 6 6 6
+ 2 2 6 2 2 6 6 6 6 30 30 30
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 82 82 82 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 26 26 26 66 66 66 62 62 62 2 2 6
+ 2 2 6 38 38 38 10 10 10 26 26 26
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 238 238 238
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 6 6 6
+ 2 2 6 2 2 6 10 10 10 30 30 30
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 58 58 58 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 38 38 38 78 78 78 6 6 6 2 2 6
+ 2 2 6 46 46 46 14 14 14 42 42 42
+246 246 246 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 10 10 10
+ 2 2 6 2 2 6 22 22 22 14 14 14
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 62 62 62 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 74 74 74 2 2 6 2 2 6
+ 14 14 14 70 70 70 34 34 34 62 62 62
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 14 14 14
+ 2 2 6 2 2 6 30 30 30 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 62 62 62 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 54 54 54 62 62 62 2 2 6 2 2 6
+ 2 2 6 30 30 30 46 46 46 70 70 70
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 226 226 226 10 10 10
+ 2 2 6 6 6 6 30 30 30 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 66 66 66 58 58 58 22 22 22
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 22 22 22
+ 58 58 58 62 62 62 2 2 6 2 2 6
+ 2 2 6 2 2 6 30 30 30 78 78 78
+250 250 250 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 206 206 206 2 2 6
+ 22 22 22 34 34 34 18 14 6 22 22 22
+ 26 26 26 18 18 18 6 6 6 2 2 6
+ 2 2 6 82 82 82 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 26 26 26
+ 62 62 62 106 106 106 74 54 14 185 133 11
+210 162 10 121 92 8 6 6 6 62 62 62
+238 238 238 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 246 246 246
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 158 158 158 18 18 18
+ 14 14 14 2 2 6 2 2 6 2 2 6
+ 6 6 6 18 18 18 66 66 66 38 38 38
+ 6 6 6 94 94 94 50 50 50 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 10 10 10 10 10 10 18 18 18 38 38 38
+ 78 78 78 142 134 106 216 158 10 242 186 14
+246 190 14 246 190 14 156 118 10 10 10 10
+ 90 90 90 238 238 238 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 246 230 190
+238 204 91 238 204 91 181 142 44 37 26 9
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 38 38 38 46 46 46
+ 26 26 26 106 106 106 54 54 54 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 14 14 14 22 22 22
+ 30 30 30 38 38 38 50 50 50 70 70 70
+106 106 106 190 142 34 226 170 11 242 186 14
+246 190 14 246 190 14 246 190 14 154 114 10
+ 6 6 6 74 74 74 226 226 226 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 231 231 231 250 250 250
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 228 184 62
+241 196 14 241 208 19 232 195 16 38 30 10
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 30 30 30 26 26 26
+203 166 17 154 142 90 66 66 66 26 26 26
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 38 38 38 58 58 58
+ 78 78 78 86 86 86 101 101 101 123 123 123
+175 146 61 210 150 10 234 174 13 246 186 14
+246 190 14 246 190 14 246 190 14 238 190 10
+102 78 10 2 2 6 46 46 46 198 198 198
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 234 234 234 242 242 242
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 224 178 62
+242 186 14 241 196 14 210 166 10 22 18 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 6 6 6 121 92 8
+238 202 15 232 195 16 82 82 82 34 34 34
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 14 14 14 38 38 38 70 70 70 154 122 46
+190 142 34 200 144 11 197 138 11 197 138 11
+213 154 11 226 170 11 242 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+225 175 15 46 32 6 2 2 6 22 22 22
+158 158 158 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 242 242 242 224 178 62
+239 182 13 236 186 11 213 154 11 46 32 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 61 42 6 225 175 15
+238 190 10 236 186 11 112 100 78 42 42 42
+ 14 14 14 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 22 22 22 54 54 54 154 122 46 213 154 11
+226 170 11 230 174 11 226 170 11 226 170 11
+236 178 12 242 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+241 196 14 184 144 12 10 10 10 2 2 6
+ 6 6 6 116 116 116 242 242 242 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 231 231 231 198 198 198 214 170 54
+236 178 12 236 178 12 210 150 10 137 92 6
+ 18 14 6 2 2 6 2 2 6 2 2 6
+ 6 6 6 70 47 6 200 144 11 236 178 12
+239 182 13 239 182 13 124 112 88 58 58 58
+ 22 22 22 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 70 70 70 180 133 36 226 170 11
+239 182 13 242 186 14 242 186 14 246 186 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 232 195 16 98 70 6 2 2 6
+ 2 2 6 2 2 6 66 66 66 221 221 221
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 206 206 206 198 198 198 214 166 58
+230 174 11 230 174 11 216 158 10 192 133 9
+163 110 8 116 81 8 102 78 10 116 81 8
+167 114 7 197 138 11 226 170 11 239 182 13
+242 186 14 242 186 14 162 146 94 78 78 78
+ 34 34 34 14 14 14 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 30 30 30 78 78 78 190 142 34 226 170 11
+239 182 13 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 241 196 14 203 166 17 22 18 6
+ 2 2 6 2 2 6 2 2 6 38 38 38
+218 218 218 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 206 206 206 198 198 198 202 162 69
+226 170 11 236 178 12 224 166 10 210 150 10
+200 144 11 197 138 11 192 133 9 197 138 11
+210 150 10 226 170 11 242 186 14 246 190 14
+246 190 14 246 186 14 225 175 15 124 112 88
+ 62 62 62 30 30 30 14 14 14 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 174 135 50 224 166 10
+239 182 13 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 241 196 14 139 102 15
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 78 78 78 250 250 250 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+250 250 250 214 214 214 198 198 198 190 150 46
+219 162 10 236 178 12 234 174 13 224 166 10
+216 158 10 213 154 11 213 154 11 216 158 10
+226 170 11 239 182 13 246 190 14 246 190 14
+246 190 14 246 190 14 242 186 14 206 162 42
+101 101 101 58 58 58 30 30 30 14 14 14
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 74 74 74 174 135 50 216 158 10
+236 178 12 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 241 196 14 226 184 13
+ 61 42 6 2 2 6 2 2 6 2 2 6
+ 22 22 22 238 238 238 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 226 226 226 187 187 187 180 133 36
+216 158 10 236 178 12 239 182 13 236 178 12
+230 174 11 226 170 11 226 170 11 230 174 11
+236 178 12 242 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 186 14 239 182 13
+206 162 42 106 106 106 66 66 66 34 34 34
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 26 26 26 70 70 70 163 133 67 213 154 11
+236 178 12 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 241 196 14
+190 146 13 18 14 6 2 2 6 2 2 6
+ 46 46 46 246 246 246 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 221 221 221 86 86 86 156 107 11
+216 158 10 236 178 12 242 186 14 246 186 14
+242 186 14 239 182 13 239 182 13 242 186 14
+242 186 14 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+242 186 14 225 175 15 142 122 72 66 66 66
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 26 26 26 70 70 70 163 133 67 210 150 10
+236 178 12 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+232 195 16 121 92 8 34 34 34 106 106 106
+221 221 221 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+242 242 242 82 82 82 18 14 6 163 110 8
+216 158 10 236 178 12 242 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 242 186 14 163 133 67
+ 46 46 46 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 10 10 10
+ 30 30 30 78 78 78 163 133 67 210 150 10
+236 178 12 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+241 196 14 215 174 15 190 178 144 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 218 218 218
+ 58 58 58 2 2 6 22 18 6 167 114 7
+216 158 10 236 178 12 246 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 186 14 242 186 14 190 150 46
+ 54 54 54 22 22 22 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 38 38 38 86 86 86 180 133 36 213 154 11
+236 178 12 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 232 195 16 190 146 13 214 214 214
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 250 250 250 170 170 170 26 26 26
+ 2 2 6 2 2 6 37 26 9 163 110 8
+219 162 10 239 182 13 246 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 186 14 236 178 12 224 166 10 142 122 72
+ 46 46 46 18 18 18 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 109 106 95 192 133 9 224 166 10
+242 186 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+242 186 14 226 184 13 210 162 10 142 110 46
+226 226 226 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+253 253 253 253 253 253 253 253 253 253 253 253
+198 198 198 66 66 66 2 2 6 2 2 6
+ 2 2 6 2 2 6 50 34 6 156 107 11
+219 162 10 239 182 13 246 186 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 242 186 14
+234 174 13 213 154 11 154 122 46 66 66 66
+ 30 30 30 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 22 22 22
+ 58 58 58 154 121 60 206 145 10 234 174 13
+242 186 14 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 186 14 236 178 12 210 162 10 163 110 8
+ 61 42 6 138 138 138 218 218 218 250 250 250
+253 253 253 253 253 253 253 253 253 250 250 250
+242 242 242 210 210 210 144 144 144 66 66 66
+ 6 6 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 61 42 6 163 110 8
+216 158 10 236 178 12 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 239 182 13 230 174 11 216 158 10
+190 142 34 124 112 88 70 70 70 38 38 38
+ 18 18 18 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 22 22 22
+ 62 62 62 168 124 44 206 145 10 224 166 10
+236 178 12 239 182 13 242 186 14 242 186 14
+246 186 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 236 178 12 216 158 10 175 118 6
+ 80 54 7 2 2 6 6 6 6 30 30 30
+ 54 54 54 62 62 62 50 50 50 38 38 38
+ 14 14 14 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 80 54 7 167 114 7
+213 154 11 236 178 12 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 190 14 242 186 14 239 182 13 239 182 13
+230 174 11 210 150 10 174 135 50 124 112 88
+ 82 82 82 54 54 54 34 34 34 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 18 18 18
+ 50 50 50 158 118 36 192 133 9 200 144 11
+216 158 10 219 162 10 224 166 10 226 170 11
+230 174 11 236 178 12 239 182 13 239 182 13
+242 186 14 246 186 14 246 190 14 246 190 14
+246 190 14 246 190 14 246 190 14 246 190 14
+246 186 14 230 174 11 210 150 10 163 110 8
+104 69 6 10 10 10 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 91 60 6 167 114 7
+206 145 10 230 174 11 242 186 14 246 190 14
+246 190 14 246 190 14 246 186 14 242 186 14
+239 182 13 230 174 11 224 166 10 213 154 11
+180 133 36 124 112 88 86 86 86 58 58 58
+ 38 38 38 22 22 22 10 10 10 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 14 14 14
+ 34 34 34 70 70 70 138 110 50 158 118 36
+167 114 7 180 123 7 192 133 9 197 138 11
+200 144 11 206 145 10 213 154 11 219 162 10
+224 166 10 230 174 11 239 182 13 242 186 14
+246 186 14 246 186 14 246 186 14 246 186 14
+239 182 13 216 158 10 185 133 11 152 99 6
+104 69 6 18 14 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 2 2 6 2 2 6 2 2 6
+ 2 2 6 6 6 6 80 54 7 152 99 6
+192 133 9 219 162 10 236 178 12 239 182 13
+246 186 14 242 186 14 239 182 13 236 178 12
+224 166 10 206 145 10 192 133 9 154 121 60
+ 94 94 94 62 62 62 42 42 42 22 22 22
+ 14 14 14 6 6 6 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 18 18 18 34 34 34 58 58 58 78 78 78
+101 98 89 124 112 88 142 110 46 156 107 11
+163 110 8 167 114 7 175 118 6 180 123 7
+185 133 11 197 138 11 210 150 10 219 162 10
+226 170 11 236 178 12 236 178 12 234 174 13
+219 162 10 197 138 11 163 110 8 130 83 6
+ 91 60 6 10 10 10 2 2 6 2 2 6
+ 18 18 18 38 38 38 38 38 38 38 38 38
+ 38 38 38 38 38 38 38 38 38 38 38 38
+ 38 38 38 38 38 38 26 26 26 2 2 6
+ 2 2 6 6 6 6 70 47 6 137 92 6
+175 118 6 200 144 11 219 162 10 230 174 11
+234 174 13 230 174 11 219 162 10 210 150 10
+192 133 9 163 110 8 124 112 88 82 82 82
+ 50 50 50 30 30 30 14 14 14 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 14 14 14 22 22 22 34 34 34
+ 42 42 42 58 58 58 74 74 74 86 86 86
+101 98 89 122 102 70 130 98 46 121 87 25
+137 92 6 152 99 6 163 110 8 180 123 7
+185 133 11 197 138 11 206 145 10 200 144 11
+180 123 7 156 107 11 130 83 6 104 69 6
+ 50 34 6 54 54 54 110 110 110 101 98 89
+ 86 86 86 82 82 82 78 78 78 78 78 78
+ 78 78 78 78 78 78 78 78 78 78 78 78
+ 78 78 78 82 82 82 86 86 86 94 94 94
+106 106 106 101 101 101 86 66 34 124 80 6
+156 107 11 180 123 7 192 133 9 200 144 11
+206 145 10 200 144 11 192 133 9 175 118 6
+139 102 15 109 106 95 70 70 70 42 42 42
+ 22 22 22 10 10 10 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 6 6 6 10 10 10
+ 14 14 14 22 22 22 30 30 30 38 38 38
+ 50 50 50 62 62 62 74 74 74 90 90 90
+101 98 89 112 100 78 121 87 25 124 80 6
+137 92 6 152 99 6 152 99 6 152 99 6
+138 86 6 124 80 6 98 70 6 86 66 30
+101 98 89 82 82 82 58 58 58 46 46 46
+ 38 38 38 34 34 34 34 34 34 34 34 34
+ 34 34 34 34 34 34 34 34 34 34 34 34
+ 34 34 34 34 34 34 38 38 38 42 42 42
+ 54 54 54 82 82 82 94 86 76 91 60 6
+134 86 6 156 107 11 167 114 7 175 118 6
+175 118 6 167 114 7 152 99 6 121 87 25
+101 98 89 62 62 62 34 34 34 18 18 18
+ 6 6 6 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 6 6 6 10 10 10
+ 18 18 18 22 22 22 30 30 30 42 42 42
+ 50 50 50 66 66 66 86 86 86 101 98 89
+106 86 58 98 70 6 104 69 6 104 69 6
+104 69 6 91 60 6 82 62 34 90 90 90
+ 62 62 62 38 38 38 22 22 22 14 14 14
+ 10 10 10 10 10 10 10 10 10 10 10 10
+ 10 10 10 10 10 10 6 6 6 10 10 10
+ 10 10 10 10 10 10 10 10 10 14 14 14
+ 22 22 22 42 42 42 70 70 70 89 81 66
+ 80 54 7 104 69 6 124 80 6 137 92 6
+134 86 6 116 81 8 100 82 52 86 86 86
+ 58 58 58 30 30 30 14 14 14 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 10 10 10 14 14 14
+ 18 18 18 26 26 26 38 38 38 54 54 54
+ 70 70 70 86 86 86 94 86 76 89 81 66
+ 89 81 66 86 86 86 74 74 74 50 50 50
+ 30 30 30 14 14 14 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 18 18 18 34 34 34 58 58 58
+ 82 82 82 89 81 66 89 81 66 89 81 66
+ 94 86 66 94 86 76 74 74 74 50 50 50
+ 26 26 26 14 14 14 6 6 6 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 6 6 6 6 6 6 14 14 14 18 18 18
+ 30 30 30 38 38 38 46 46 46 54 54 54
+ 50 50 50 42 42 42 30 30 30 18 18 18
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 6 6 6 14 14 14 26 26 26
+ 38 38 38 50 50 50 58 58 58 58 58 58
+ 54 54 54 42 42 42 30 30 30 18 18 18
+ 10 10 10 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 6 6 6 10 10 10 14 14 14 18 18 18
+ 18 18 18 14 14 14 10 10 10 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 6 6 6
+ 14 14 14 18 18 18 22 22 22 22 22 22
+ 18 18 18 14 14 14 10 10 10 6 6 6
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
P3
-142 114
+# Standard 16-color Linux logo
+80 80
255
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 85 170 170 170 170 170 170 170 85 0 85 255 85 170 85 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 170 85 0
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 170 170 170
-170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 255 85
-255 85 85 85 255 85 170 170 170 170 85 0 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 85 85 85
-170 170 170 170 85 0 170 170 170 85 85 85 170 85 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0
-85 85 85 85 85 85 170 85 0 85 255 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 170 85 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 170 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 85 0 85 255 85 170 85 0 170 85 0 170 85 0 85 255 85
-170 85 0 170 85 0 0 170 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 170 85 0
-255 255 85 170 85 0 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 85 255 85 170 85 0 170 85 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
-85 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 85 255 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 170 85 0
-170 85 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 170 85 0 255 255 85 85 255 85 255 255 85
-170 170 170 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85
-85 255 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 170 85 0 255 255 85 255 255 85 255 255 85
-255 255 255 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 255 255 85
-170 85 0 170 85 0 0 170 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 170 85 0 85 255 85 255 255 85 170 170 170 255 255 255
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 85 255 85 255 255 85
-255 255 85 85 255 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 255 255 85 255 255 85 255 255 85 255 255 255 255 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 85 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 85 0 255 255 85 255 255 85 255 255 255 170 170 170
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-255 255 85 85 255 85 170 85 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-255 255 85 85 255 85 255 255 85 170 170 170 255 255 255 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 85 255 85 170 85 0
-255 255 85 170 85 0 170 85 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
-85 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 0
-170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 170 85 0 170 85 0
-170 85 0 85 255 85 255 255 85 85 85 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 255 85 170 170 170 170 170 170
-85 85 85 170 170 170 170 170 170 170 85 0 170 170 170 170 170 170
-85 255 85 170 170 170 170 85 0 170 170 170 85 255 85 255 85 85
-85 255 85 170 170 170 255 255 85 85 85 85 255 255 85 170 170 170
-85 255 85 170 170 170 255 255 85 170 170 170 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 255 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 170 85 0 0 170 0 85 85 85
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 85 255 85
-255 85 85 85 255 85 85 85 85 255 85 85 85 85 85 170 170 170
-170 85 0 170 170 170 85 85 85 85 255 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
-170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 85 85 85 85 85 85
-255 255 85 170 170 170 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 170 170 170 170 85 0 170 170 170
-170 170 170 255 255 85 170 170 170 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 170 85 0 170 85 0 0 170 0
-0 0 0 170 85 0 170 85 0 0 170 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85
-170 170 170 85 85 85 85 85 85 170 170 170 170 85 0 85 85 85
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0
-170 85 0 255 255 85 170 85 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 170 85 0 255 255 85 255 255 85
-85 255 85 170 85 0 0 170 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 170 0 170 85 0 255 255 85
-85 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-170 85 0 255 255 85 85 255 85 255 255 85 255 255 85 170 85 0
-85 255 85 170 85 0 170 85 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 170 85 0
-255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85
-170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 170 85 0
-255 255 85 170 85 0 255 255 85 170 85 0 255 255 85 85 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 170 85 0 170 85 0
-0 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 255 255 85 170 85 0 255 255 85 170 85 0 85 255 85
-255 255 85 85 255 85 170 85 0 170 85 0 85 255 85 170 85 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 85 255 85
-255 255 85 255 255 85 85 255 85 255 255 85 255 255 85 255 255 85
-255 255 85 170 85 0 255 255 85 85 255 85 255 255 85 255 255 85
-170 85 0 170 85 0 85 255 85 170 85 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 255 255 85 255 255 85
-170 85 0 255 255 85 255 255 85 170 85 0 255 255 85 170 85 0
-255 255 85 85 255 85 170 85 0 255 255 85 170 85 0 85 255 85
-170 85 0 170 85 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 85 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 85 255 85
-170 85 0 255 255 85 170 85 0 85 255 85 170 85 0 170 85 0
-0 170 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 255 85 255 255 85
-170 85 0 255 255 85 255 255 85 170 85 0 85 255 85 170 85 0
-255 255 85 170 85 0 0 170 0 170 85 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 170 170 170 170 170 170 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 255 255 85
-255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 170 85 0
-0 170 0 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-255 255 85 255 255 85 170 85 0 0 170 0 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 170 85 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 85 85 85 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 170 170 170
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 85 85 85 170 170 170
-170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 170 170 170 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 170 170 170 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 255 255 255 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
-170 170 170 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-255 255 255 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 255 255 255
-255 255 255 170 170 170 170 170 170 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 170 170 170 255 255 255 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 170 170 170 255 255 255 170 170 170 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 255 255 255 255 255 255 255 255 255 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 170 170 170 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 85 85 85
-170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 255 255 255 255 255 255 85 85 85 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 255 255 255 255 255 255 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 255 255 255 255 255 255 255 255 255 255 255 255 0 0 0
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 170 170 170 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 255 255 255
-170 170 170 170 170 170 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 255 255 255 255 255 255 0 0 0 0 0 0 85 85 85
-255 255 255 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 170 170 170 255 255 255 170 170 170 170 170 170 85 85 85
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
-255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 170 170 170 255 255 85 85 85 85
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-85 85 85 170 170 170 170 170 170 170 170 170 170 85 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 170 170 170 170 85 0
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-255 255 255 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 85 85 85
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 170 85 0 85 255 85 170 85 0 170 170 170 85 85 85
-85 85 85 0 0 0 0 0 0 85 85 85 170 85 0 85 255 85
-170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-85 85 85 85 85 85 170 85 0 0 0 0 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 170 170 170 170 85 0 170 170 170 170 85 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 255 85 85 170 170 170 85 255 85 170 85 0
-85 85 85 85 85 85 170 85 0 85 85 85 170 170 170 85 85 85
-170 170 170 170 85 0 85 85 85 85 85 85 85 85 85 85 85 85
-170 85 0 85 255 85 85 85 85 85 85 85 85 85 85 170 85 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 170 170 170
-255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 85 0 170 170 170 170 85 0 85 85 85 0 0 0
-85 85 85 85 85 85 85 255 85 170 170 170 170 170 170 170 85 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 85 255 85 255 85 85 170 170 170 170 170 170
-170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 85 0
-170 170 170 85 85 85 85 255 85 170 85 0 170 170 170 170 85 0
-170 170 170 170 170 170 170 85 0 85 85 85 85 85 85 85 255 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 170 170 170 170 170 170 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 255 255 85 85 85 85 85 85 85 85 85 85
-85 255 85 255 85 85 170 170 170 170 85 0 170 170 170 85 255 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 170 85 0 170 170 170 170 170 170 255 255 85
-170 170 170 255 85 85 170 170 170 170 170 170 255 255 85 170 170 170
-85 255 85 170 170 170 255 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 85 85 85 0 0 0 85 85 85
-85 85 85 170 85 0 85 85 85 0 0 0 85 85 85 85 85 85
-85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 85 85
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0
-170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 85 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 170 170 170 85 85 85 85 85 85 0 0 0
-85 85 85 85 85 85 170 170 170 85 85 85 170 170 170 170 85 0
-170 170 170 85 255 85 170 170 170 170 85 0 170 170 170 170 170 170
-255 255 85 170 170 170 170 170 170 255 255 255 255 255 85 170 170 170
-255 255 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 255 255 85 170 170 170 255 255 85 170 170 170
-255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 85 85 170 170 170 170 170 170
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 85 85 85
-85 85 85 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
-255 255 85 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 255 85 170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 255 255 255
-255 255 85 255 255 255 255 255 85 170 170 170 170 170 170 170 85 0
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85
-255 255 255 255 255 255 255 255 85 255 255 255 255 255 255 170 170 170
-255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 170 170 170 170 170 170 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 255 255 255 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 170 170 170 255 255 85 170 170 170 255 255 85
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170
-255 255 85 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 255 255 255
-170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
-85 85 85 170 85 0 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 85 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 170 170 170 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 255 85 170 170 170
-170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 85 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 255 255 85
-170 170 170 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255
-255 255 255 170 170 170 255 255 255 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 255 255 85
-85 85 85 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 170 170 170
-170 170 170 170 170 170 85 85 85 0 0 0 85 85 85 85 85 85
-0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-85 85 85 85 85 85 170 170 170 170 170 170 255 255 255 170 170 170
-255 255 255 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170
-255 85 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
-170 170 170 255 255 255 255 255 255 170 170 170 255 255 255 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 170 170
-255 255 85 170 170 170 255 255 255 170 170 170 255 255 255 255 255 255
-255 255 85 255 255 255 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 85
-170 170 170 170 85 0 85 85 85 0 0 0 85 85 85 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 255 255 85 170 170 170 170 170 170
-255 255 85 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85
-85 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 255 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 85
-170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 170 170 170
-255 255 255 170 170 170 170 170 170 170 170 170 170 170 170 255 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 85 85 85 0 0 0
-85 85 85 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 170 85 0 170 170 170 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 85 255 85
-255 85 85 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255
-255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 170 170 170
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255
-170 170 170 170 170 170 255 255 85 170 170 170 255 85 85 85 255 85
-170 170 170 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
-170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 85 85 85 85 85 85 85 85 85 170 170 170 255 255 85
-170 170 170 170 85 0 170 170 170 170 170 170 170 85 0 85 85 85
-170 170 170 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 85 170 170 170 170 170 170
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
-170 170 170 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 170 170 170 170 170 170 170 85 0 170 170 170 85 85 85
-170 170 170 170 170 170 170 85 0 170 170 170 170 85 0 85 85 85
-85 255 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
-170 85 0 170 170 170 85 255 85 170 85 0 170 170 170 85 85 85
-170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 255 255 255
-255 255 85 255 255 255 170 170 170 170 170 170 170 170 170 170 85 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 85 255 85 170 170 170
-170 85 0 170 85 0 170 170 170 85 255 85 85 85 85 170 170 170
-170 85 0 85 85 85 0 0 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 85 85 85 170 85 0 85 85 85
-170 170 170 170 85 0 170 170 170 85 85 85 170 170 170 170 85 0
-170 170 170 85 255 85 170 85 0 170 170 170 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 255 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-170 85 0 170 170 170 255 255 85 170 170 170 255 255 255 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 170 170 170 170 85 0
-170 170 170 85 255 85 170 85 0 170 170 170 170 85 0 85 85 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-85 255 85 170 170 170 170 85 0 170 170 170 170 85 0 85 255 85
-170 170 170 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 255 170 170 170 170 170 170 170 170 170 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 85 0 85 85 85 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 85 0
-170 170 170 85 85 85 170 170 170 170 85 0 170 170 170 85 85 85
-170 85 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 170 85 0
-85 85 85 255 85 85 85 255 85 170 85 0 170 170 170 170 170 170
-170 85 0 170 170 170 85 85 85 255 255 85 170 170 170 170 170 170
-255 255 255 170 170 170 255 255 255 255 255 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 170 170 170 170 85 0 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 85 85 85 85 170 170 170
-85 255 85 255 85 85 170 170 170 85 255 85 255 85 85 85 255 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 85 85 85
-85 85 85 85 255 85 255 85 85 170 170 170 85 255 85 170 85 0
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 170 170 85 85 85 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 255 255 85
-85 85 85 255 255 85 170 170 170 170 85 0 170 170 170 85 85 85
-170 85 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 170 170 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170
-170 85 0 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
-170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 255 255 85 170 170 170 170 85 0
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 85 0 85 255 85 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 170 170 170 170 170 170 170 170 170 255 255 255 255 255 255
-255 255 255 170 170 170 255 255 85 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 85 0
-170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
-170 170 170 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 170 85 0 170 170 170 170 85 0 170 170 170 170 170 170
-170 170 170 255 255 85 170 170 170 255 255 85 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
-170 85 0 170 170 170 170 85 0 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
-255 255 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 170 170 170 255 255 85 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
-170 170 170 170 170 170 170 170 170 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 170 0 85 85 85
-170 85 0 85 255 85 170 170 170 170 170 170 170 170 170 255 255 85
-255 255 255 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-170 170 170 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-170 85 0 170 170 170 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 255 255 255 170 170 170 255 255 255 170 170 170 255 255 255
-255 255 255 255 255 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 170 85 0 170 170 170 170 170 170 255 255 85 170 170 170
-170 170 170 255 255 255 255 255 255 255 255 255 170 170 170 255 255 255
-170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 255 85
-170 170 170 255 255 85 170 170 170 255 255 85 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
-170 170 170 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 170 85 0 170 170 170 170 170 170
-255 255 85 170 170 170 255 255 255 255 255 85 255 255 255 255 255 255
-170 170 170 255 255 85 170 170 170 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
-170 170 170 170 170 170 170 170 170 255 255 255 170 170 170 255 255 255
-170 170 170 255 255 255 170 170 170 255 255 255 255 255 85 255 255 255
-170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 170 85 0 85 85 85 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 170 170 170 255 255 255 255 255 255 170 170 170
-255 255 85 170 170 170 170 170 170 170 85 0 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-255 255 85 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255
-255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
-170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 170 85 0 170 170 170
-255 255 85 170 170 170 255 255 85 255 255 255 170 170 170 255 255 255
-170 170 170 170 170 170 170 170 170 170 170 170 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
-170 85 0 170 170 170 255 255 255 170 170 170 255 255 255 170 170 170
-255 255 255 255 255 255 170 170 170 255 255 255 255 255 85 170 170 170
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 85 85 85 170 85 0 85 85 85 170 170 170
-170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 85 170 170 170 170 85 0 85 255 85 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
-170 170 170 170 170 170 255 255 85 170 170 170 255 255 255 255 255 255
-255 255 85 255 255 255 170 170 170 255 255 255 170 170 170 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 85 0 170 170 170 170 170 170 255 255 85 170 170 170 170 170 170
-170 170 170 170 170 170 170 170 170 170 85 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-255 255 85 170 170 170 170 170 170 170 170 170 255 255 85 170 170 170
-255 255 255 170 170 170 255 255 85 170 170 170 85 85 85 85 85 85
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 170 170 170
-170 85 0 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
-170 170 170 170 170 170 255 255 85 170 170 170 170 170 170 170 170 170
-170 170 170 255 255 255 170 170 170 170 170 170 85 85 85 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-85 85 85 85 85 85 85 85 85 170 85 0 85 85 85 170 85 0
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 85 0
-85 85 85 170 85 0 170 170 170 170 170 170 170 170 170 255 255 85
-170 170 170 170 170 170 170 85 0 85 85 85 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
-85 85 85 85 255 85 170 85 0 170 170 170 170 85 0 170 170 170
-85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
-85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
-0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 170 170 170 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 170 170 170 85 85 85 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 170 170 170 170 170
+170 170 170 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 170 170 170 170 170
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+170 170 170 170 170 170 255 255 255 255 255 255
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 170 170 170 170 170 170
+255 255 255 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+170 170 170 0 0 0 0 0 0 255 255 255
+ 85 85 85 0 0 0 0 0 0 0 0 0
+255 255 255 170 170 170 0 0 0 85 85 85
+170 170 170 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+ 85 85 85 0 0 0 0 0 0 170 170 170
+ 85 85 85 0 0 0 0 0 0 0 0 0
+255 255 255 85 85 85 0 0 0 0 0 0
+ 85 85 85 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+170 170 170 0 0 0 0 0 0 170 170 170
+ 85 85 85 85 85 85 85 85 85 85 85 85
+255 255 255 85 85 85 0 0 0 0 0 0
+ 85 85 85 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+255 255 255 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+170 170 170 170 170 170 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 170 170 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 170 85 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 85 85 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 170 170 170 85 85 85
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 85 85 85 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 170 170 170 170 170 170 170 170 0 0 0
+ 0 0 0 0 0 0 170 170 170 170 170 170
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 170 170 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 170 170 170
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 85 85 85 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 170 170 170 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 85 85 85
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 170 170
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 85 85 85 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 85 85 85
+ 85 85 85 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+ 0 0 0 85 85 85 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 85 85 85
+ 85 85 85 0 0 0 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 85 85 85
+ 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 85 85 85 0 0 0
+ 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 85 85 85 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 0 0 0 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 85 85 85 85 85 85 0 0 0
+ 0 0 0 85 85 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 85 85 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 85 85 85 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 85 85 85 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 85 85 85 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 85 85 85 85 85 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170
+ 85 85 85 0 0 0 0 0 0 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 85 85 85
+ 0 0 0 0 0 0 0 0 0 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 85 85 85
+ 85 85 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 85 85 85 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 170 85 0 170 85 0 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 85 85 85 85 85 85 85 85 85 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 255 255 85 170 85 0
+170 85 0 170 85 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 255 255 85 170 85 0
+255 255 85 170 85 0 170 85 0 170 85 0
+ 85 85 85 85 85 85 85 85 85 85 85 85
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 85 85 85
+ 85 85 85 85 85 85 85 85 85 170 85 0
+170 85 0 170 85 0 170 85 0 255 255 85
+170 85 0 255 255 85 170 85 0 170 85 0
+170 85 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 170 85 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
+ 0 0 0 0 0 0 0 0 0 0 0 0
*/
static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 1);
+ fb_set_suspend(mx3fb->fbi, 1);
release_console_sem();
if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
*/
static int mx3fb_resume(struct platform_device *pdev)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
sdc_enable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, drv_data->backlight_level);
+ sdc_set_brightness(mx3fb, mx3fb->backlight_level);
}
acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 0);
+ fb_set_suspend(mx3fb->fbi, 0);
release_console_sem();
return 0;
static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
{
struct pxafb_info *fbi = dev_id;
- unsigned int lccr0, lcsr, lcsr1;
+ unsigned int lccr0, lcsr;
lcsr = lcd_readl(fbi, LCSR);
if (lcsr & LCSR_LDD) {
lcd_writel(fbi, LCSR, lcsr);
#ifdef CONFIG_FB_PXA_OVERLAY
- lcsr1 = lcd_readl(fbi, LCSR1);
- if (lcsr1 & LCSR1_BS(1))
- complete(&fbi->overlay[0].branch_done);
+ {
+ unsigned int lcsr1 = lcd_readl(fbi, LCSR1);
+ if (lcsr1 & LCSR1_BS(1))
+ complete(&fbi->overlay[0].branch_done);
- if (lcsr1 & LCSR1_BS(2))
- complete(&fbi->overlay[1].branch_done);
+ if (lcsr1 & LCSR1_BS(2))
+ complete(&fbi->overlay[1].branch_done);
- lcd_writel(fbi, LCSR1, lcsr1);
+ lcd_writel(fbi, LCSR1, lcsr1);
+ }
#endif
return IRQ_HANDLED;
}
static const struct svga_fb_format s3fb_formats[] = {
{ 0, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
FB_TYPE_TEXT, FB_AUX_TEXT_SVGA_STEP4, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 4, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 1,
+ { 4, {0, 4, 0}, {0, 4, 0}, {0, 4, 0}, {0, 0, 0}, 1,
FB_TYPE_INTERLEAVED_PLANES, 1, FB_VISUAL_PSEUDOCOLOR, 8, 16},
- { 8, {0, 6, 0}, {0, 6, 0}, {0, 6, 0}, {0, 0, 0}, 0,
+ { 8, {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_PSEUDOCOLOR, 4, 8},
{16, {10, 5, 0}, {5, 5, 0}, {0, 5, 0}, {0, 0, 0}, 0,
FB_TYPE_PACKED_PIXELS, 0, FB_VISUAL_TRUECOLOR, 2, 4},
extern void (*sa1100fb_backlight_power)(int on);
extern void (*sa1100fb_lcd_power)(int on);
-/*
- * IMHO this looks wrong. In 8BPP, length should be 8.
- */
-static struct sa1100fb_rgb rgb_8 = {
+static struct sa1100fb_rgb rgb_4 = {
.red = { .offset = 0, .length = 4, },
.green = { .offset = 0, .length = 4, },
.blue = { .offset = 0, .length = 4, },
.transp = { .offset = 0, .length = 0, },
};
+static struct sa1100fb_rgb rgb_8 = {
+ .red = { .offset = 0, .length = 8, },
+ .green = { .offset = 0, .length = 8, },
+ .blue = { .offset = 0, .length = 8, },
+ .transp = { .offset = 0, .length = 0, },
+};
+
static struct sa1100fb_rgb def_rgb_16 = {
.red = { .offset = 11, .length = 5, },
.green = { .offset = 5, .length = 6, },
DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
switch (var->bits_per_pixel) {
case 4:
- rgbidx = RGB_8;
+ rgbidx = RGB_4;
break;
case 8:
rgbidx = RGB_8;
fbi->fb.monspecs = monspecs;
fbi->fb.pseudo_palette = (fbi + 1);
+ fbi->rgb[RGB_4] = &rgb_4;
fbi->rgb[RGB_8] = &rgb_8;
fbi->rgb[RGB_16] = &def_rgb_16;
unsigned long lccr3;
};
-#define RGB_8 (0)
-#define RGB_16 (1)
-#define NR_RGB 2
+#define RGB_4 (0)
+#define RGB_8 (1)
+#define RGB_16 (2)
+#define NR_RGB 3
struct sa1100fb_info {
struct fb_info fb;
switch(var->bits_per_pixel) {
case 8:
var->red.offset = var->green.offset = var->blue.offset = 0;
- var->red.length = var->green.length = var->blue.length = 6;
+ var->red.length = var->green.length = var->blue.length = 8;
break;
case 16:
var->red.offset = 11;
* color depth = SUM(var->{color}.length)
*
* Pseudocolor:
- * var->{color}.offset is 0
- * var->{color}.length contains width of DAC or the number of unique
- * colors available (color depth)
+ * var->{color}.offset is 0 unless the palette index takes less than
+ * bits_per_pixel bits and is stored in the upper
+ * bits of the pixel value
+ * var->{color}.length is set so that 1 << length is the number of
+ * available palette entries
* pseudo_palette is not used
* RAMDAC[X] is programmed to (red, green, blue)
* color depth = var->{color}.length
/* Trailing bits */
if (last)
- *dst = comp(pat, *dst, first);
+ *dst = comp(pat, *dst, last);
}
}
void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
{
- unsigned long pat, fg;
+ unsigned long pat, pat2, fg;
unsigned long width = rect->width, height = rect->height;
int bits = BITS_PER_LONG, bytes = bits >> 3;
u32 bpp = p->var.bits_per_pixel;
dst_idx += p->fix.line_length*8;
}
} else {
- int right;
- int r;
- int rot = (left-dst_idx) % bpp;
+ int right, r;
void (*fill_op)(struct fb_info *p, unsigned long *dst,
int dst_idx, unsigned long pat, int left,
int right, unsigned n, int bits) = NULL;
-
- /* rotate pattern to correct start position */
- pat = pat << rot | pat >> (bpp-rot);
-
- right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+ right = left;
+ left = bpp - right;
+#else
+ right = bpp - left;
+#endif
switch (rect->rop) {
case ROP_XOR:
fill_op = bitfill_unaligned_rev;
fill_op = bitfill_unaligned;
break;
default:
- printk(KERN_ERR "cfb_fillrect(): unknown rop, "
+ printk(KERN_ERR "sys_fillrect(): unknown rop, "
"defaulting to ROP_COPY\n");
fill_op = bitfill_unaligned;
break;
}
while (height--) {
- dst += dst_idx >> (ffs(bits) - 1);
+ dst += dst_idx / bits;
dst_idx &= (bits - 1);
- fill_op(p, dst, dst_idx, pat, left, right,
+ r = dst_idx % bpp;
+ /* rotate pattern to the correct start position */
+ pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+ fill_op(p, dst, dst_idx, pat2, left, right,
width*bpp, bits);
- r = (p->fix.line_length*8) % bpp;
- pat = pat << (bpp-r) | pat >> r;
dst_idx += p->fix.line_length*8;
}
}
static u16 maxhf __devinitdata; /* maximum horizontal frequency */
static u16 vbemode __devinitdata; /* force use of a specific VBE mode */
static char *mode_option __devinitdata;
+static u8 dac_width = 6;
static struct uvesafb_ktask *uvfb_tasks[UVESAFB_TASKS_MAX];
static DEFINE_MUTEX(uvfb_lock);
var->blue.offset = 0;
var->transp.offset = 0;
- /*
- * We're assuming that we can switch the DAC to 8 bits. If
- * this proves to be incorrect, we'll update the fields
- * later in set_par().
- */
- if (par->vbe_ib.capabilities & VBE_CAP_CAN_SWITCH_DAC) {
- var->red.length = 8;
- var->green.length = 8;
- var->blue.length = 8;
- var->transp.length = 0;
- } else {
- var->red.length = 6;
- var->green.length = 6;
- var->blue.length = 6;
- var->transp.length = 0;
- }
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 0;
}
}
struct fb_info *info)
{
struct uvesafb_pal_entry entry;
- int shift = 16 - info->var.green.length;
+ int shift = 16 - dac_width;
int err = 0;
if (regno >= info->cmap.len)
static int uvesafb_setcmap(struct fb_cmap *cmap, struct fb_info *info)
{
struct uvesafb_pal_entry *entries;
- int shift = 16 - info->var.green.length;
+ int shift = 16 - dac_width;
int i, err = 0;
if (info->var.bits_per_pixel == 8) {
err = uvesafb_exec(task);
if (err || (task->t.regs.eax & 0xffff) != 0x004f ||
((task->t.regs.ebx & 0xff00) >> 8) != 8) {
- /*
- * We've failed to set the DAC palette format -
- * time to correct var.
- */
- info->var.red.length = 6;
- info->var.green.length = 6;
- info->var.blue.length = 6;
+ dac_width = 6;
+ } else {
+ dac_width = 8;
}
}
* {hardwarespecific} contains width of RAMDAC
* cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
* RAMDAC[X] is programmed to (red, green, blue)
- *
+ *
* Pseudocolor:
- * uses offset = 0 && length = RAMDAC register width.
- * var->{color}.offset is 0
- * var->{color}.length contains widht of DAC
+ * var->{color}.offset is 0 unless the palette index takes less than
+ * bits_per_pixel bits and is stored in the upper
+ * bits of the pixel value
+ * var->{color}.length is set so that 1 << length is the number of available
+ * palette entries
* cmap is not used
* RAMDAC[X] is programmed to (red, green, blue)
+ *
* Truecolor:
* does not use DAC. Usually 3 are present.
* var->{color}.offset contains start of bitfield
static int __devinit via_pci_probe(void)
{
- unsigned int default_xres, default_yres;
+ unsigned long default_xres, default_yres;
char *tmpc, *tmpm;
char *tmpc_sec, *tmpm_sec;
int vmode_index;
viafb_FB_MM = viaparinfo->fbmem_virt;
tmpm = viafb_mode;
tmpc = strsep(&tmpm, "x");
- strict_strtoul(tmpc, 0, (unsigned long *)&default_xres);
- strict_strtoul(tmpm, 0, (unsigned long *)&default_yres);
+ strict_strtoul(tmpc, 0, &default_xres);
+ strict_strtoul(tmpm, 0, &default_yres);
vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
try_to_freeze();
wait_event_interruptible(vb->config_change,
(diff = towards_target(vb)) != 0
- || kthread_should_stop());
+ || kthread_should_stop()
+ || freezing(current));
if (diff > 0)
fill_balloon(vb, diff);
else if (diff < 0)
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/spinlock.h>
+#include <mach/bridge-regs.h>
#include <plat/orion5x_wdt.h>
/*
char *buf)
{
return sprintf(buf, "%llu\n",
- (u64)balloon_stats.target_pages << PAGE_SHIFT);
+ (unsigned long long)balloon_stats.target_pages
+ << PAGE_SHIFT);
}
static ssize_t store_target(struct sys_device *dev,
set_cpu_present(cpu, false);
}
-static void vcpu_hotplug(unsigned int cpu)
+static int vcpu_online(unsigned int cpu)
{
int err;
char dir[32], state[32];
- if (!cpu_possible(cpu))
- return;
-
sprintf(dir, "cpu/%u", cpu);
err = xenbus_scanf(XBT_NIL, dir, "availability", "%s", state);
if (err != 1) {
printk(KERN_ERR "XENBUS: Unable to read cpu state\n");
- return;
+ return err;
}
- if (strcmp(state, "online") == 0) {
+ if (strcmp(state, "online") == 0)
+ return 1;
+ else if (strcmp(state, "offline") == 0)
+ return 0;
+
+ printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n", state, cpu);
+ return -EINVAL;
+}
+static void vcpu_hotplug(unsigned int cpu)
+{
+ if (!cpu_possible(cpu))
+ return;
+
+ switch (vcpu_online(cpu)) {
+ case 1:
enable_hotplug_cpu(cpu);
- } else if (strcmp(state, "offline") == 0) {
+ break;
+ case 0:
(void)cpu_down(cpu);
disable_hotplug_cpu(cpu);
- } else {
- printk(KERN_ERR "XENBUS: unknown state(%s) on CPU%d\n",
- state, cpu);
+ break;
+ default:
+ break;
}
}
static int setup_cpu_watcher(struct notifier_block *notifier,
unsigned long event, void *data)
{
+ int cpu;
static struct xenbus_watch cpu_watch = {
.node = "cpu",
.callback = handle_vcpu_hotplug_event};
(void)register_xenbus_watch(&cpu_watch);
+ for_each_possible_cpu(cpu) {
+ if (vcpu_online(cpu) == 0) {
+ (void)cpu_down(cpu);
+ cpu_clear(cpu, cpu_present_map);
+ }
+ }
+
return NOTIFY_DONE;
}
gnttab_resume();
xen_mm_unpin_all();
- sysdev_resume();
-
if (!*cancelled) {
xen_irq_resume();
xen_console_resume();
xen_timer_resume();
}
+ sysdev_resume();
+ device_power_up(PMSG_RESUME);
+
return 0;
}
#include <linux/mount.h>
#include <linux/idr.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
root = d_alloc_root(inode);
if (!root) {
+ iput(inode);
retval = -ENOMEM;
goto release_sb;
}
return 0;
release_sb:
- if (sb) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
- }
+ deactivate_locked_super(sb);
free_stat:
kfree(st);
static void
v9fs_umount_begin(struct super_block *sb)
{
- struct v9fs_session_info *v9ses = sb->s_fs_info;
+ struct v9fs_session_info *v9ses;
+ lock_kernel();
+ v9ses = sb->s_fs_info;
v9fs_session_cancel(v9ses);
+ unlock_kernel();
}
static const struct super_operations v9fs_super_ops = {
kfree(new_opts);
return -EINVAL;
}
- kfree(sb->s_options);
- sb->s_options = new_opts;
+ replace_mount_options(sb, new_opts);
sbi->s_flags = mount_flags;
sbi->s_mode = mode;
return 0;
}
+#ifdef CONFIG_AFS_FSCACHE
/*
* deal with notification that a page was read from the cache
*/
SetPageUptodate(page);
unlock_page(page);
}
+#endif
/*
* AFS read page from file, directory or symlink
sb->s_flags = flags;
ret = afs_fill_super(sb, ¶ms);
if (ret < 0) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
goto error;
}
- sb->s_options = new_opts;
+ save_mount_options(sb, new_opts);
sb->s_flags |= MS_ACTIVE;
} else {
_debug("reuse");
- kfree(new_opts);
ASSERTCMP(sb->s_flags, &, MS_ACTIVE);
}
simple_set_mnt(mnt, sb);
afs_put_volume(params.volume);
afs_put_cell(params.cell);
+ kfree(new_opts);
_leave(" = 0 [%p]", sb);
return 0;
{
struct autofs_dirhash *dh = &sbi->dirhash;
struct autofs_dir_ent *ent;
- struct dentry *dentry;
unsigned long timeout = sbi->exp_timeout;
while (1) {
+ struct path path;
+ int umount_ok;
+
if ( list_empty(&dh->expiry_head) || sbi->catatonic )
return NULL; /* No entries */
/* We keep the list sorted by last_usage and want old stuff */
return ent; /* Symlinks are always expirable */
/* Get the dentry for the autofs subdirectory */
- dentry = ent->dentry;
+ path.dentry = ent->dentry;
- if ( !dentry ) {
+ if (!path.dentry) {
/* Should only happen in catatonic mode */
printk("autofs: dentry == NULL but inode range is directory, entry %s\n", ent->name);
autofs_delete_usage(ent);
continue;
}
- if ( !dentry->d_inode ) {
- dput(dentry);
+ if (!path.dentry->d_inode) {
+ dput(path.dentry);
printk("autofs: negative dentry on expiry queue: %s\n",
ent->name);
autofs_delete_usage(ent);
/* Make sure entry is mounted and unused; note that dentry will
point to the mounted-on-top root. */
- if (!S_ISDIR(dentry->d_inode->i_mode)||!d_mountpoint(dentry)) {
+ if (!S_ISDIR(path.dentry->d_inode->i_mode) ||
+ !d_mountpoint(path.dentry)) {
DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
continue;
}
- mntget(mnt);
- dget(dentry);
- if (!follow_down(&mnt, &dentry)) {
- dput(dentry);
- mntput(mnt);
+ path.mnt = mnt;
+ path_get(&path);
+ if (!follow_down(&path.mnt, &path.dentry)) {
+ path_put(&path);
DPRINTK(("autofs: not expirable (not a mounted directory): %s\n", ent->name));
continue;
}
- while (d_mountpoint(dentry) && follow_down(&mnt, &dentry))
+ while (d_mountpoint(path.dentry) &&
+ follow_down(&path.mnt, &path.dentry))
;
- dput(dentry);
+ umount_ok = may_umount(path.mnt);
+ path_put(&path);
- if ( may_umount(mnt) ) {
- mntput(mnt);
+ if (umount_ok) {
DPRINTK(("autofs: signaling expire on %s\n", ent->name));
return ent; /* Expirable! */
}
DPRINTK(("autofs: didn't expire due to may_umount: %s\n", ent->name));
- mntput(mnt);
}
return NULL; /* No expirable entries */
}
* Check a string doesn't overrun the chunk of
* memory we copied from user land.
*/
-static int invalid_str(char *str, void *end)
+static int invalid_str(char *str, size_t size)
{
- while ((void *) str <= end)
- if (!*str++)
- return 0;
+ if (memchr(str, 0, size))
+ return 0;
return -EINVAL;
}
}
if (param->size > sizeof(*param)) {
- err = invalid_str(param->path,
- (void *) ((size_t) param + param->size));
+ err = invalid_str(param->path, param->size - sizeof(*param));
if (err) {
AUTOFS_WARN(
"path string terminator missing for cmd(0x%08x)",
}
path = param->path;
- devid = sbi->sb->s_dev;
+ devid = new_encode_dev(sbi->sb->s_dev);
param->requester.uid = param->requester.gid = -1;
* Otherwise it's an offset mount and we need to check
* if we can umount its mount, if there is one.
*/
- if (!d_mountpoint(dentry))
+ if (!d_mountpoint(dentry)) {
+ status = 0;
goto done;
+ }
}
/* Update the expiry counter if fs is busy */
prstatus->pr_sigpend = p->pending.signal.sig[0];
prstatus->pr_sighold = p->blocked.sig[0];
prstatus->pr_pid = task_pid_vnr(p);
- prstatus->pr_ppid = task_pid_vnr(p->parent);
+ prstatus->pr_ppid = task_pid_vnr(p->real_parent);
prstatus->pr_pgrp = task_pgrp_vnr(p);
prstatus->pr_sid = task_session_vnr(p);
if (thread_group_leader(p)) {
psinfo->pr_psargs[len] = 0;
psinfo->pr_pid = task_pid_vnr(p);
- psinfo->pr_ppid = task_pid_vnr(p->parent);
+ psinfo->pr_ppid = task_pid_vnr(p->real_parent);
psinfo->pr_pgrp = task_pgrp_vnr(p);
psinfo->pr_sid = task_session_vnr(p);
{
struct bio_vec *bvl;
- /*
- * If 'bs' is given, lookup the pool and do the mempool alloc.
- * If not, this is a bio_kmalloc() allocation and just do a
- * kzalloc() for the exact number of vecs right away.
- */
- if (!bs)
- bvl = kmalloc(nr * sizeof(struct bio_vec), gfp_mask);
-
/*
* see comment near bvec_array define!
*/
mempool_free(p, bs->bio_pool);
}
-/*
- * default destructor for a bio allocated with bio_alloc_bioset()
- */
-static void bio_fs_destructor(struct bio *bio)
-{
- bio_free(bio, fs_bio_set);
-}
-
-static void bio_kmalloc_destructor(struct bio *bio)
-{
- if (bio_has_allocated_vec(bio))
- kfree(bio->bi_io_vec);
- kfree(bio);
-}
-
void bio_init(struct bio *bio)
{
memset(bio, 0, sizeof(*bio));
**/
struct bio *bio_alloc_bioset(gfp_t gfp_mask, int nr_iovecs, struct bio_set *bs)
{
+ unsigned long idx = BIO_POOL_NONE;
struct bio_vec *bvl = NULL;
- struct bio *bio = NULL;
- unsigned long idx = 0;
- void *p = NULL;
-
- if (bs) {
- p = mempool_alloc(bs->bio_pool, gfp_mask);
- if (!p)
- goto err;
- bio = p + bs->front_pad;
- } else {
- bio = kmalloc(sizeof(*bio), gfp_mask);
- if (!bio)
- goto err;
- }
+ struct bio *bio;
+ void *p;
+
+ p = mempool_alloc(bs->bio_pool, gfp_mask);
+ if (unlikely(!p))
+ return NULL;
+ bio = p + bs->front_pad;
bio_init(bio);
nr_iovecs = bvec_nr_vecs(idx);
}
+out_set:
bio->bi_flags |= idx << BIO_POOL_OFFSET;
bio->bi_max_vecs = nr_iovecs;
-out_set:
bio->bi_io_vec = bvl;
-
return bio;
err_free:
- if (bs)
- mempool_free(p, bs->bio_pool);
- else
- kfree(bio);
-err:
+ mempool_free(p, bs->bio_pool);
return NULL;
}
+static void bio_fs_destructor(struct bio *bio)
+{
+ bio_free(bio, fs_bio_set);
+}
+
+/**
+ * bio_alloc - allocate a new bio, memory pool backed
+ * @gfp_mask: allocation mask to use
+ * @nr_iovecs: number of iovecs
+ *
+ * Allocate a new bio with @nr_iovecs bvecs. If @gfp_mask
+ * contains __GFP_WAIT, the allocation is guaranteed to succeed.
+ *
+ * RETURNS:
+ * Pointer to new bio on success, NULL on failure.
+ */
struct bio *bio_alloc(gfp_t gfp_mask, int nr_iovecs)
{
struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, fs_bio_set);
return bio;
}
-/*
- * Like bio_alloc(), but doesn't use a mempool backing. This means that
- * it CAN fail, but while bio_alloc() can only be used for allocations
- * that have a short (finite) life span, bio_kmalloc() should be used
- * for more permanent bio allocations (like allocating some bio's for
- * initalization or setup purposes).
- */
+static void bio_kmalloc_destructor(struct bio *bio)
+{
+ if (bio_integrity(bio))
+ bio_integrity_free(bio);
+ kfree(bio);
+}
+
+/**
+ * bio_alloc - allocate a bio for I/O
+ * @gfp_mask: the GFP_ mask given to the slab allocator
+ * @nr_iovecs: number of iovecs to pre-allocate
+ *
+ * Description:
+ * bio_alloc will allocate a bio and associated bio_vec array that can hold
+ * at least @nr_iovecs entries. Allocations will be done from the
+ * fs_bio_set. Also see @bio_alloc_bioset.
+ *
+ * If %__GFP_WAIT is set, then bio_alloc will always be able to allocate
+ * a bio. This is due to the mempool guarantees. To make this work, callers
+ * must never allocate more than 1 bio at the time from this pool. Callers
+ * that need to allocate more than 1 bio must always submit the previously
+ * allocate bio for IO before attempting to allocate a new one. Failure to
+ * do so can cause livelocks under memory pressure.
+ *
+ **/
struct bio *bio_kmalloc(gfp_t gfp_mask, int nr_iovecs)
{
- struct bio *bio = bio_alloc_bioset(gfp_mask, nr_iovecs, NULL);
+ struct bio *bio;
- if (bio)
- bio->bi_destructor = bio_kmalloc_destructor;
+ bio = kmalloc(sizeof(struct bio) + nr_iovecs * sizeof(struct bio_vec),
+ gfp_mask);
+ if (unlikely(!bio))
+ return NULL;
+
+ bio_init(bio);
+ bio->bi_flags |= BIO_POOL_NONE << BIO_POOL_OFFSET;
+ bio->bi_max_vecs = nr_iovecs;
+ bio->bi_io_vec = bio->bi_inline_vecs;
+ bio->bi_destructor = bio_kmalloc_destructor;
return bio;
}
len += iov[i].iov_len;
}
+ if (offset)
+ nr_pages++;
+
bmd = bio_alloc_map_data(nr_pages, iov_count, gfp_mask);
if (!bmd)
return ERR_PTR(-ENOMEM);
ret = -ENOMEM;
- bio = bio_alloc(gfp_mask, nr_pages);
+ bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
goto out_bmd;
if (!nr_pages)
return ERR_PTR(-EINVAL);
- bio = bio_alloc(gfp_mask, nr_pages);
+ bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
return ERR_PTR(-ENOMEM);
int offset, i;
struct bio *bio;
- bio = bio_alloc(gfp_mask, nr_pages);
+ bio = bio_kmalloc(gfp_mask, nr_pages);
if (!bio)
return ERR_PTR(-ENOMEM);
-ifneq ($(KERNELRELEASE),)
-# kbuild part of makefile
obj-$(CONFIG_BTRFS_FS) := btrfs.o
-btrfs-y := super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
+
+btrfs-y += super.o ctree.o extent-tree.o print-tree.o root-tree.o dir-item.o \
file-item.o inode-item.o inode-map.o disk-io.o \
transaction.o inode.o file.o tree-defrag.o \
extent_map.o sysfs.o struct-funcs.o xattr.o ordered-data.o \
extent_io.o volumes.o async-thread.o ioctl.o locking.o orphan.o \
ref-cache.o export.o tree-log.o acl.o free-space-cache.o zlib.o \
compression.o delayed-ref.o
-else
-
-# Normal Makefile
-
-KERNELDIR := /lib/modules/`uname -r`/build
-all:
- $(MAKE) -C $(KERNELDIR) M=`pwd` CONFIG_BTRFS_FS=m modules
-
-modules_install:
- $(MAKE) -C $(KERNELDIR) M=`pwd` modules_install
-clean:
- $(MAKE) -C $(KERNELDIR) M=`pwd` clean
-
-endif
return ERR_PTR(-EINVAL);
}
+ /* Handle the cached NULL acl case without locking */
+ acl = ACCESS_ONCE(*p_acl);
+ if (!acl)
+ return acl;
+
spin_lock(&inode->i_lock);
- if (*p_acl != BTRFS_ACL_NOT_CACHED)
- acl = posix_acl_dup(*p_acl);
+ acl = *p_acl;
+ if (acl != BTRFS_ACL_NOT_CACHED)
+ acl = posix_acl_dup(acl);
spin_unlock(&inode->i_lock);
- if (acl)
+ if (acl != BTRFS_ACL_NOT_CACHED)
return acl;
-
size = __btrfs_getxattr(inode, name, "", 0);
if (size > 0) {
value = kzalloc(size, GFP_NOFS);
btrfs_update_cached_acl(inode, p_acl, acl);
}
kfree(value);
- } else if (size == -ENOENT) {
+ } else if (size == -ENOENT || size == -ENODATA || size == 0) {
+ /* FIXME, who returns -ENOENT? I think nobody */
acl = NULL;
btrfs_update_cached_acl(inode, p_acl, acl);
+ } else {
+ acl = ERR_PTR(-EIO);
}
return acl;
#define WORK_QUEUED_BIT 0
#define WORK_DONE_BIT 1
#define WORK_ORDER_DONE_BIT 2
+#define WORK_HIGH_PRIO_BIT 3
/*
* container for the kthread task pointer and the list of pending work
/* list of struct btrfs_work that are waiting for service */
struct list_head pending;
+ struct list_head prio_pending;
/* list of worker threads from struct btrfs_workers */
struct list_head worker_list;
spin_lock_irqsave(&workers->lock, flags);
- while (!list_empty(&workers->order_list)) {
- work = list_entry(workers->order_list.next,
- struct btrfs_work, order_list);
-
+ while (1) {
+ if (!list_empty(&workers->prio_order_list)) {
+ work = list_entry(workers->prio_order_list.next,
+ struct btrfs_work, order_list);
+ } else if (!list_empty(&workers->order_list)) {
+ work = list_entry(workers->order_list.next,
+ struct btrfs_work, order_list);
+ } else {
+ break;
+ }
if (!test_bit(WORK_DONE_BIT, &work->flags))
break;
do {
spin_lock_irq(&worker->lock);
again_locked:
- while (!list_empty(&worker->pending)) {
- cur = worker->pending.next;
+ while (1) {
+ if (!list_empty(&worker->prio_pending))
+ cur = worker->prio_pending.next;
+ else if (!list_empty(&worker->pending))
+ cur = worker->pending.next;
+ else
+ break;
+
work = list_entry(cur, struct btrfs_work, list);
list_del(&work->list);
clear_bit(WORK_QUEUED_BIT, &work->flags);
spin_lock_irq(&worker->lock);
check_idle_worker(worker);
-
}
if (freezing(current)) {
worker->working = 0;
* jump_in?
*/
smp_mb();
- if (!list_empty(&worker->pending))
+ if (!list_empty(&worker->pending) ||
+ !list_empty(&worker->prio_pending))
continue;
/*
*/
schedule_timeout(1);
smp_mb();
- if (!list_empty(&worker->pending))
+ if (!list_empty(&worker->pending) ||
+ !list_empty(&worker->prio_pending))
continue;
if (kthread_should_stop())
/* still no more work?, sleep for real */
spin_lock_irq(&worker->lock);
set_current_state(TASK_INTERRUPTIBLE);
- if (!list_empty(&worker->pending))
+ if (!list_empty(&worker->pending) ||
+ !list_empty(&worker->prio_pending))
goto again_locked;
/*
INIT_LIST_HEAD(&workers->worker_list);
INIT_LIST_HEAD(&workers->idle_list);
INIT_LIST_HEAD(&workers->order_list);
+ INIT_LIST_HEAD(&workers->prio_order_list);
spin_lock_init(&workers->lock);
workers->max_workers = max;
workers->idle_thresh = 32;
}
INIT_LIST_HEAD(&worker->pending);
+ INIT_LIST_HEAD(&worker->prio_pending);
INIT_LIST_HEAD(&worker->worker_list);
spin_lock_init(&worker->lock);
atomic_set(&worker->num_pending, 0);
goto out;
spin_lock_irqsave(&worker->lock, flags);
- list_add_tail(&work->list, &worker->pending);
+ if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags))
+ list_add_tail(&work->list, &worker->prio_pending);
+ else
+ list_add_tail(&work->list, &worker->pending);
atomic_inc(&worker->num_pending);
/* by definition we're busy, take ourselves off the idle
return 0;
}
+void btrfs_set_work_high_prio(struct btrfs_work *work)
+{
+ set_bit(WORK_HIGH_PRIO_BIT, &work->flags);
+}
+
/*
* places a struct btrfs_work into the pending queue of one of the kthreads
*/
worker = find_worker(workers);
if (workers->ordered) {
spin_lock_irqsave(&workers->lock, flags);
- list_add_tail(&work->order_list, &workers->order_list);
+ if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags)) {
+ list_add_tail(&work->order_list,
+ &workers->prio_order_list);
+ } else {
+ list_add_tail(&work->order_list, &workers->order_list);
+ }
spin_unlock_irqrestore(&workers->lock, flags);
} else {
INIT_LIST_HEAD(&work->order_list);
spin_lock_irqsave(&worker->lock, flags);
- list_add_tail(&work->list, &worker->pending);
+ if (test_bit(WORK_HIGH_PRIO_BIT, &work->flags))
+ list_add_tail(&work->list, &worker->prio_pending);
+ else
+ list_add_tail(&work->list, &worker->pending);
atomic_inc(&worker->num_pending);
check_busy_worker(worker);
* of work items waiting for completion
*/
struct list_head order_list;
+ struct list_head prio_order_list;
/* lock for finding the next worker thread to queue on */
spinlock_t lock;
int btrfs_stop_workers(struct btrfs_workers *workers);
void btrfs_init_workers(struct btrfs_workers *workers, char *name, int max);
int btrfs_requeue_work(struct btrfs_work *work);
+void btrfs_set_work_high_prio(struct btrfs_work *work);
#endif
int ret = 0;
int blocksize;
- parent = path->nodes[level - 1];
+ parent = path->nodes[level + 1];
if (!parent)
return 0;
nritems = btrfs_header_nritems(parent);
- slot = path->slots[level];
+ slot = path->slots[level + 1];
blocksize = btrfs_level_size(root, level);
if (slot > 0) {
block1 = 0;
free_extent_buffer(eb);
}
- if (slot < nritems) {
+ if (slot + 1 < nritems) {
block2 = btrfs_node_blockptr(parent, slot + 1);
gen = btrfs_node_ptr_generation(parent, slot + 1);
eb = btrfs_find_tree_block(root, block2, blocksize);
}
if (block1 || block2) {
ret = -EAGAIN;
+
+ /* release the whole path */
btrfs_release_path(root, path);
+
+ /* read the blocks */
if (block1)
readahead_tree_block(root, block1, blocksize, 0);
if (block2)
eb = read_tree_block(root, block1, blocksize, 0);
free_extent_buffer(eb);
}
- if (block1) {
+ if (block2) {
eb = read_tree_block(root, block2, blocksize, 0);
free_extent_buffer(eb);
}
u32 blocksize;
struct extent_buffer *b = *eb_ret;
struct extent_buffer *tmp;
+ int ret;
blocknr = btrfs_node_blockptr(b, slot);
gen = btrfs_node_ptr_generation(b, slot);
tmp = btrfs_find_tree_block(root, blocknr, blocksize);
if (tmp && btrfs_buffer_uptodate(tmp, gen)) {
+ /*
+ * we found an up to date block without sleeping, return
+ * right away
+ */
*eb_ret = tmp;
return 0;
}
/*
* reduce lock contention at high levels
* of the btree by dropping locks before
- * we read.
+ * we read. Don't release the lock on the current
+ * level because we need to walk this node to figure
+ * out which blocks to read.
*/
- btrfs_release_path(NULL, p);
+ btrfs_unlock_up_safe(p, level + 1);
+ btrfs_set_path_blocking(p);
+
if (tmp)
free_extent_buffer(tmp);
if (p->reada)
reada_for_search(root, p, level, slot, key->objectid);
+ btrfs_release_path(NULL, p);
+
+ ret = -EAGAIN;
tmp = read_tree_block(root, blocknr, blocksize, gen);
- if (tmp)
+ if (tmp) {
+ /*
+ * If the read above didn't mark this buffer up to date,
+ * it will never end up being up to date. Set ret to EIO now
+ * and give up so that our caller doesn't loop forever
+ * on our EAGAINs.
+ */
+ if (!btrfs_buffer_uptodate(tmp, 0))
+ ret = -EIO;
free_extent_buffer(tmp);
- return -EAGAIN;
+ }
+ return ret;
}
/*
if (ret == -EAGAIN)
goto again;
+ if (ret == -EIO)
+ goto done;
+
if (!p->skip_locking) {
int lret;
*/
if (!p->leave_spinning)
btrfs_set_path_blocking(p);
+ if (ret < 0)
+ btrfs_release_path(root, p);
return ret;
}
if (ret == -EAGAIN)
goto again;
+ if (ret < 0) {
+ btrfs_release_path(root, path);
+ goto done;
+ }
+
if (!path->skip_locking) {
ret = btrfs_try_spin_lock(next);
if (!ret) {
if (ret == -EAGAIN)
goto again;
+ if (ret < 0) {
+ btrfs_release_path(root, path);
+ goto done;
+ }
+
if (!path->skip_locking) {
btrfs_assert_tree_locked(path->nodes[level]);
ret = btrfs_try_spin_lock(next);
u64 metadata_alloc_profile;
u64 system_alloc_profile;
+ unsigned data_chunk_allocations;
+ unsigned metadata_ratio;
+
void *bdev_holder;
};
extern struct file_operations btrfs_file_operations;
int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
- u64 start, u64 end, u64 inline_limit, u64 *hint_block);
+ u64 start, u64 end, u64 locked_end,
+ u64 inline_limit, u64 *hint_block);
int btrfs_mark_extent_written(struct btrfs_trans_handle *trans,
struct btrfs_root *root,
struct inode *inode, u64 start, u64 end);
memcpy(&found, result, csum_size);
read_extent_buffer(buf, &val, 0, csum_size);
- printk(KERN_INFO "btrfs: %s checksum verify failed "
- "on %llu wanted %X found %X level %d\n",
- root->fs_info->sb->s_id,
- buf->start, val, found, btrfs_header_level(buf));
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs: %s checksum verify "
+ "failed on %llu wanted %X found %X "
+ "level %d\n",
+ root->fs_info->sb->s_id,
+ (unsigned long long)buf->start, val, found,
+ btrfs_header_level(buf));
+ }
if (result != (char *)&inline_result)
kfree(result);
return 1;
ret = 0;
goto out;
}
- printk("parent transid verify failed on %llu wanted %llu found %llu\n",
- (unsigned long long)eb->start,
- (unsigned long long)parent_transid,
- (unsigned long long)btrfs_header_generation(eb));
+ if (printk_ratelimit()) {
+ printk("parent transid verify failed on %llu wanted %llu "
+ "found %llu\n",
+ (unsigned long long)eb->start,
+ (unsigned long long)parent_transid,
+ (unsigned long long)btrfs_header_generation(eb));
+ }
ret = 1;
clear_extent_buffer_uptodate(io_tree, eb);
out:
found_start = btrfs_header_bytenr(eb);
if (found_start != start) {
- printk(KERN_INFO "btrfs bad tree block start %llu %llu\n",
- (unsigned long long)found_start,
- (unsigned long long)eb->start);
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs bad tree block start "
+ "%llu %llu\n",
+ (unsigned long long)found_start,
+ (unsigned long long)eb->start);
+ }
ret = -EIO;
goto err;
}
goto err;
}
if (check_tree_block_fsid(root, eb)) {
- printk(KERN_INFO "btrfs bad fsid on block %llu\n",
- (unsigned long long)eb->start);
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs bad fsid on block %llu\n",
+ (unsigned long long)eb->start);
+ }
ret = -EIO;
goto err;
}
async->bio_flags = bio_flags;
atomic_inc(&fs_info->nr_async_submits);
+
+ if (rw & (1 << BIO_RW_SYNCIO))
+ btrfs_set_work_high_prio(&async->work);
+
btrfs_queue_worker(&fs_info->workers, &async->work);
-#if 0
- int limit = btrfs_async_submit_limit(fs_info);
- if (atomic_read(&fs_info->nr_async_submits) > limit) {
- wait_event_timeout(fs_info->async_submit_wait,
- (atomic_read(&fs_info->nr_async_submits) < limit),
- HZ/10);
- wait_event_timeout(fs_info->async_submit_wait,
- (atomic_read(&fs_info->nr_async_bios) < limit),
- HZ/10);
- }
-#endif
while (atomic_read(&fs_info->async_submit_draining) &&
atomic_read(&fs_info->nr_async_submits)) {
wait_event(fs_info->async_submit_wait,
return btrfs_map_bio(BTRFS_I(inode)->root, rw, bio,
mirror_num, 0);
}
+
/*
* kthread helpers are used to submit writes so that checksumming
* can happen in parallel across all CPUs
}
}
-#if 0
-static int btree_writepage(struct page *page, struct writeback_control *wbc)
-{
- struct buffer_head *bh;
- struct btrfs_root *root = BTRFS_I(page->mapping->host)->root;
- struct buffer_head *head;
- if (!page_has_buffers(page)) {
- create_empty_buffers(page, root->fs_info->sb->s_blocksize,
- (1 << BH_Dirty)|(1 << BH_Uptodate));
- }
- head = page_buffers(page);
- bh = head;
- do {
- if (buffer_dirty(bh))
- csum_tree_block(root, bh, 0);
- bh = bh->b_this_page;
- } while (bh != head);
- return block_write_full_page(page, btree_get_block, wbc);
-}
-#endif
-
static struct address_space_operations btree_aops = {
.readpage = btree_readpage,
.writepage = btree_writepage,
if (ret == 0)
set_bit(EXTENT_BUFFER_UPTODATE, &buf->bflags);
- else
- WARN_ON(1);
return buf;
}
int ret = 0;
struct btrfs_device *device;
struct backing_dev_info *bdi;
-#if 0
- if ((bdi_bits & (1 << BDI_write_congested)) &&
- btrfs_congested_async(info, 0))
- return 1;
-#endif
+
list_for_each_entry(device, &info->fs_devices->devices, dev_list) {
if (!device->bdev)
continue;
fs_info->btree_inode = new_inode(sb);
fs_info->btree_inode->i_ino = 1;
fs_info->btree_inode->i_nlink = 1;
+ fs_info->metadata_ratio = 8;
fs_info->thread_pool_size = min_t(unsigned long,
num_online_cpus() + 2, 8);
if (features) {
printk(KERN_ERR "BTRFS: couldn't mount because of "
"unsupported optional features (%Lx).\n",
- features);
+ (unsigned long long)features);
err = -EINVAL;
goto fail_iput;
}
if (!(sb->s_flags & MS_RDONLY) && features) {
printk(KERN_ERR "BTRFS: couldn't mount RDWR because of "
"unsupported option features (%Lx).\n",
- features);
+ (unsigned long long)features);
err = -EINVAL;
goto fail_iput;
}
device->barriers = 0;
get_bh(bh);
lock_buffer(bh);
- ret = submit_bh(WRITE, bh);
+ ret = submit_bh(WRITE_SYNC, bh);
}
} else {
- ret = submit_bh(WRITE, bh);
+ ret = submit_bh(WRITE_SYNC, bh);
}
if (!ret && wait) {
if (fs_info->delalloc_bytes) {
printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n",
- fs_info->delalloc_bytes);
+ (unsigned long long)fs_info->delalloc_bytes);
}
if (fs_info->total_ref_cache_size) {
printk(KERN_INFO "btrfs: at umount reference cache size %llu\n",
btrfs_stop_workers(&fs_info->endio_write_workers);
btrfs_stop_workers(&fs_info->submit_workers);
-#if 0
- while (!list_empty(&fs_info->hashers)) {
- struct btrfs_hasher *hasher;
- hasher = list_entry(fs_info->hashers.next, struct btrfs_hasher,
- hashers);
- list_del(&hasher->hashers);
- crypto_free_hash(&fs_info->hash_tfm);
- kfree(hasher);
- }
-#endif
btrfs_close_devices(fs_info->fs_devices);
btrfs_mapping_tree_free(&fs_info->mapping_tree);
}
/*
- * return the block group that contains teh given bytenr
+ * return the block group that contains the given bytenr
*/
struct btrfs_block_group_cache *btrfs_lookup_block_group(
struct btrfs_fs_info *info,
printk(KERN_ERR "no space left, need %llu, %llu delalloc bytes"
", %llu bytes_used, %llu bytes_reserved, "
"%llu bytes_pinned, %llu bytes_readonly, %llu may use"
- "%llu total\n", bytes, data_sinfo->bytes_delalloc,
- data_sinfo->bytes_used, data_sinfo->bytes_reserved,
- data_sinfo->bytes_pinned, data_sinfo->bytes_readonly,
- data_sinfo->bytes_may_use, data_sinfo->total_bytes);
+ "%llu total\n", (unsigned long long)bytes,
+ (unsigned long long)data_sinfo->bytes_delalloc,
+ (unsigned long long)data_sinfo->bytes_used,
+ (unsigned long long)data_sinfo->bytes_reserved,
+ (unsigned long long)data_sinfo->bytes_pinned,
+ (unsigned long long)data_sinfo->bytes_readonly,
+ (unsigned long long)data_sinfo->bytes_may_use,
+ (unsigned long long)data_sinfo->total_bytes);
return -ENOSPC;
}
data_sinfo->bytes_may_use += bytes;
spin_unlock(&info->lock);
}
+static void force_metadata_allocation(struct btrfs_fs_info *info)
+{
+ struct list_head *head = &info->space_info;
+ struct btrfs_space_info *found;
+
+ rcu_read_lock();
+ list_for_each_entry_rcu(found, head, list) {
+ if (found->flags & BTRFS_BLOCK_GROUP_METADATA)
+ found->force_alloc = 1;
+ }
+ rcu_read_unlock();
+}
+
static int do_chunk_alloc(struct btrfs_trans_handle *trans,
struct btrfs_root *extent_root, u64 alloc_bytes,
u64 flags, int force)
{
struct btrfs_space_info *space_info;
+ struct btrfs_fs_info *fs_info = extent_root->fs_info;
u64 thresh;
int ret = 0;
- mutex_lock(&extent_root->fs_info->chunk_mutex);
+ mutex_lock(&fs_info->chunk_mutex);
flags = btrfs_reduce_alloc_profile(extent_root, flags);
}
spin_unlock(&space_info->lock);
+ /*
+ * if we're doing a data chunk, go ahead and make sure that
+ * we keep a reasonable number of metadata chunks allocated in the
+ * FS as well.
+ */
+ if (flags & BTRFS_BLOCK_GROUP_DATA) {
+ fs_info->data_chunk_allocations++;
+ if (!(fs_info->data_chunk_allocations %
+ fs_info->metadata_ratio))
+ force_metadata_allocation(fs_info);
+ }
+
ret = btrfs_alloc_chunk(trans, extent_root, flags);
if (ret)
space_info->full = 1;
info->bytes_pinned - info->bytes_reserved),
(info->full) ? "" : "not ");
printk(KERN_INFO "space_info total=%llu, pinned=%llu, delalloc=%llu,"
- " may_use=%llu, used=%llu\n", info->total_bytes,
- info->bytes_pinned, info->bytes_delalloc, info->bytes_may_use,
- info->bytes_used);
+ " may_use=%llu, used=%llu\n",
+ (unsigned long long)info->total_bytes,
+ (unsigned long long)info->bytes_pinned,
+ (unsigned long long)info->bytes_delalloc,
+ (unsigned long long)info->bytes_may_use,
+ (unsigned long long)info->bytes_used);
down_read(&info->groups_sem);
list_for_each_entry(cache, &info->block_groups, list) {
#include "ctree.h"
#include "btrfs_inode.h"
-/* temporary define until extent_map moves out of btrfs */
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
- unsigned long extra_flags,
- void (*ctor)(void *, struct kmem_cache *,
- unsigned long));
-
static struct kmem_cache *extent_state_cache;
static struct kmem_cache *extent_buffer_cache;
/* tells writepage not to lock the state bits for this range
* it still does the unlocking
*/
- int extent_locked;
+ unsigned int extent_locked:1;
+
+ /* tells the submit_bio code to use a WRITE_SYNC */
+ unsigned int sync_io:1;
};
int __init extent_io_init(void)
{
- extent_state_cache = btrfs_cache_create("extent_state",
- sizeof(struct extent_state), 0,
- NULL);
+ extent_state_cache = kmem_cache_create("extent_state",
+ sizeof(struct extent_state), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_state_cache)
return -ENOMEM;
- extent_buffer_cache = btrfs_cache_create("extent_buffers",
- sizeof(struct extent_buffer), 0,
- NULL);
+ extent_buffer_cache = kmem_cache_create("extent_buffers",
+ sizeof(struct extent_buffer), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_buffer_cache)
goto free_state_cache;
return 0;
return total_bytes;
}
-#if 0
-/*
- * helper function to lock both pages and extents in the tree.
- * pages must be locked first.
- */
-static int lock_range(struct extent_io_tree *tree, u64 start, u64 end)
-{
- unsigned long index = start >> PAGE_CACHE_SHIFT;
- unsigned long end_index = end >> PAGE_CACHE_SHIFT;
- struct page *page;
- int err;
-
- while (index <= end_index) {
- page = grab_cache_page(tree->mapping, index);
- if (!page) {
- err = -ENOMEM;
- goto failed;
- }
- if (IS_ERR(page)) {
- err = PTR_ERR(page);
- goto failed;
- }
- index++;
- }
- lock_extent(tree, start, end, GFP_NOFS);
- return 0;
-
-failed:
- /*
- * we failed above in getting the page at 'index', so we undo here
- * up to but not including the page at 'index'
- */
- end_index = index;
- index = start >> PAGE_CACHE_SHIFT;
- while (index < end_index) {
- page = find_get_page(tree->mapping, index);
- unlock_page(page);
- page_cache_release(page);
- index++;
- }
- return err;
-}
-
-/*
- * helper function to unlock both pages and extents in the tree.
- */
-static int unlock_range(struct extent_io_tree *tree, u64 start, u64 end)
-{
- unsigned long index = start >> PAGE_CACHE_SHIFT;
- unsigned long end_index = end >> PAGE_CACHE_SHIFT;
- struct page *page;
-
- while (index <= end_index) {
- page = find_get_page(tree->mapping, index);
- unlock_page(page);
- page_cache_release(page);
- index++;
- }
- unlock_extent(tree, start, end, GFP_NOFS);
- return 0;
-}
-#endif
-
/*
* set the private field for a given byte offset in the tree. If there isn't
* an extent_state there already, this does nothing.
return ret;
}
+static noinline void update_nr_written(struct page *page,
+ struct writeback_control *wbc,
+ unsigned long nr_written)
+{
+ wbc->nr_to_write -= nr_written;
+ if (wbc->range_cyclic || (wbc->nr_to_write > 0 &&
+ wbc->range_start == 0 && wbc->range_end == LLONG_MAX))
+ page->mapping->writeback_index = page->index + nr_written;
+}
+
/*
* the writepage semantics are similar to regular writepage. extent
* records are inserted to lock ranges in the tree, and as dirty areas
u64 delalloc_end;
int page_started;
int compressed;
+ int write_flags;
unsigned long nr_written = 0;
+ if (wbc->sync_mode == WB_SYNC_ALL)
+ write_flags = WRITE_SYNC_PLUG;
+ else
+ write_flags = WRITE;
+
WARN_ON(!PageLocked(page));
pg_offset = i_size & (PAGE_CACHE_SIZE - 1);
if (page->index > end_index ||
delalloc_end = 0;
page_started = 0;
if (!epd->extent_locked) {
+ /*
+ * make sure the wbc mapping index is at least updated
+ * to this page.
+ */
+ update_nr_written(page, wbc, 0);
+
while (delalloc_end < page_end) {
nr_delalloc = find_lock_delalloc_range(inode, tree,
page,
*/
if (page_started) {
ret = 0;
- goto update_nr_written;
+ /*
+ * we've unlocked the page, so we can't update
+ * the mapping's writeback index, just update
+ * nr_to_write.
+ */
+ wbc->nr_to_write -= nr_written;
+ goto done_unlocked;
}
}
lock_extent(tree, start, page_end, GFP_NOFS);
if (ret == -EAGAIN) {
unlock_extent(tree, start, page_end, GFP_NOFS);
redirty_page_for_writepage(wbc, page);
+ update_nr_written(page, wbc, nr_written);
unlock_page(page);
ret = 0;
- goto update_nr_written;
+ goto done_unlocked;
}
}
- nr_written++;
+ /*
+ * we don't want to touch the inode after unlocking the page,
+ * so we update the mapping writeback index now
+ */
+ update_nr_written(page, wbc, nr_written + 1);
end = page_end;
if (test_range_bit(tree, start, page_end, EXTENT_DELALLOC, 0))
(unsigned long long)end);
}
- ret = submit_extent_page(WRITE, tree, page, sector,
- iosize, pg_offset, bdev,
- &epd->bio, max_nr,
+ ret = submit_extent_page(write_flags, tree, page,
+ sector, iosize, pg_offset,
+ bdev, &epd->bio, max_nr,
end_bio_extent_writepage,
0, 0, 0);
if (ret)
unlock_extent(tree, unlock_start, page_end, GFP_NOFS);
unlock_page(page);
-update_nr_written:
- wbc->nr_to_write -= nr_written;
- if (wbc->range_cyclic || (wbc->nr_to_write > 0 &&
- wbc->range_start == 0 && wbc->range_end == LLONG_MAX))
- page->mapping->writeback_index = page->index + nr_written;
+done_unlocked:
+
return 0;
}
return ret;
}
-static noinline void flush_write_bio(void *data)
+static void flush_epd_write_bio(struct extent_page_data *epd)
{
- struct extent_page_data *epd = data;
if (epd->bio) {
- submit_one_bio(WRITE, epd->bio, 0, 0);
+ if (epd->sync_io)
+ submit_one_bio(WRITE_SYNC, epd->bio, 0, 0);
+ else
+ submit_one_bio(WRITE, epd->bio, 0, 0);
epd->bio = NULL;
}
}
+static noinline void flush_write_bio(void *data)
+{
+ struct extent_page_data *epd = data;
+ flush_epd_write_bio(epd);
+}
+
int extent_write_full_page(struct extent_io_tree *tree, struct page *page,
get_extent_t *get_extent,
struct writeback_control *wbc)
.tree = tree,
.get_extent = get_extent,
.extent_locked = 0,
+ .sync_io = wbc->sync_mode == WB_SYNC_ALL,
};
struct writeback_control wbc_writepages = {
.bdi = wbc->bdi,
- .sync_mode = WB_SYNC_NONE,
+ .sync_mode = wbc->sync_mode,
.older_than_this = NULL,
.nr_to_write = 64,
.range_start = page_offset(page) + PAGE_CACHE_SIZE,
.range_end = (loff_t)-1,
};
-
ret = __extent_writepage(page, wbc, &epd);
extent_write_cache_pages(tree, mapping, &wbc_writepages,
__extent_writepage, &epd, flush_write_bio);
- if (epd.bio)
- submit_one_bio(WRITE, epd.bio, 0, 0);
+ flush_epd_write_bio(&epd);
return ret;
}
.tree = tree,
.get_extent = get_extent,
.extent_locked = 1,
+ .sync_io = mode == WB_SYNC_ALL,
};
struct writeback_control wbc_writepages = {
.bdi = inode->i_mapping->backing_dev_info,
start += PAGE_CACHE_SIZE;
}
- if (epd.bio)
- submit_one_bio(WRITE, epd.bio, 0, 0);
+ flush_epd_write_bio(&epd);
return ret;
}
.tree = tree,
.get_extent = get_extent,
.extent_locked = 0,
+ .sync_io = wbc->sync_mode == WB_SYNC_ALL,
};
ret = extent_write_cache_pages(tree, mapping, wbc,
__extent_writepage, &epd,
flush_write_bio);
- if (epd.bio)
- submit_one_bio(WRITE, epd.bio, 0, 0);
+ flush_epd_write_bio(&epd);
return ret;
}
#include <linux/hardirq.h>
#include "extent_map.h"
-/* temporary define until extent_map moves out of btrfs */
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
- unsigned long extra_flags,
- void (*ctor)(void *, struct kmem_cache *,
- unsigned long));
static struct kmem_cache *extent_map_cache;
int __init extent_map_init(void)
{
- extent_map_cache = btrfs_cache_create("extent_map",
- sizeof(struct extent_map), 0,
- NULL);
+ extent_map_cache = kmem_cache_create("extent_map",
+ sizeof(struct extent_map), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!extent_map_cache)
return -ENOMEM;
return 0;
tree->map.rb_node = NULL;
spin_lock_init(&tree->lock);
}
-EXPORT_SYMBOL(extent_map_tree_init);
/**
* alloc_extent_map - allocate new extent map structure
atomic_set(&em->refs, 1);
return em;
}
-EXPORT_SYMBOL(alloc_extent_map);
/**
* free_extent_map - drop reference count of an extent_map
kmem_cache_free(extent_map_cache, em);
}
}
-EXPORT_SYMBOL(free_extent_map);
static struct rb_node *tree_insert(struct rb_root *root, u64 offset,
struct rb_node *node)
out:
return ret;
}
-EXPORT_SYMBOL(add_extent_mapping);
/* simple helper to do math around the end of an extent, handling wrap */
static u64 range_end(u64 start, u64 len)
out:
return em;
}
-EXPORT_SYMBOL(lookup_extent_mapping);
/**
* remove_extent_mapping - removes an extent_map from the extent tree
em->in_tree = 0;
return ret;
}
-EXPORT_SYMBOL(remove_extent_mapping);
return 0;
}
-int btrfs_check_file(struct btrfs_root *root, struct inode *inode)
-{
- return 0;
-#if 0
- struct btrfs_path *path;
- struct btrfs_key found_key;
- struct extent_buffer *leaf;
- struct btrfs_file_extent_item *extent;
- u64 last_offset = 0;
- int nritems;
- int slot;
- int found_type;
- int ret;
- int err = 0;
- u64 extent_end = 0;
-
- path = btrfs_alloc_path();
- ret = btrfs_lookup_file_extent(NULL, root, path, inode->i_ino,
- last_offset, 0);
- while (1) {
- nritems = btrfs_header_nritems(path->nodes[0]);
- if (path->slots[0] >= nritems) {
- ret = btrfs_next_leaf(root, path);
- if (ret)
- goto out;
- nritems = btrfs_header_nritems(path->nodes[0]);
- }
- slot = path->slots[0];
- leaf = path->nodes[0];
- btrfs_item_key_to_cpu(leaf, &found_key, slot);
- if (found_key.objectid != inode->i_ino)
- break;
- if (found_key.type != BTRFS_EXTENT_DATA_KEY)
- goto out;
-
- if (found_key.offset < last_offset) {
- WARN_ON(1);
- btrfs_print_leaf(root, leaf);
- printk(KERN_ERR "inode %lu found offset %llu "
- "expected %llu\n", inode->i_ino,
- (unsigned long long)found_key.offset,
- (unsigned long long)last_offset);
- err = 1;
- goto out;
- }
- extent = btrfs_item_ptr(leaf, slot,
- struct btrfs_file_extent_item);
- found_type = btrfs_file_extent_type(leaf, extent);
- if (found_type == BTRFS_FILE_EXTENT_REG) {
- extent_end = found_key.offset +
- btrfs_file_extent_num_bytes(leaf, extent);
- } else if (found_type == BTRFS_FILE_EXTENT_INLINE) {
- struct btrfs_item *item;
- item = btrfs_item_nr(leaf, slot);
- extent_end = found_key.offset +
- btrfs_file_extent_inline_len(leaf, extent);
- extent_end = (extent_end + root->sectorsize - 1) &
- ~((u64)root->sectorsize - 1);
- }
- last_offset = extent_end;
- path->slots[0]++;
- }
- if (0 && last_offset < inode->i_size) {
- WARN_ON(1);
- btrfs_print_leaf(root, leaf);
- printk(KERN_ERR "inode %lu found offset %llu size %llu\n",
- inode->i_ino, (unsigned long long)last_offset,
- (unsigned long long)inode->i_size);
- err = 1;
-
- }
-out:
- btrfs_free_path(path);
- return err;
-#endif
-}
-
/*
* this is very complex, but the basic idea is to drop all extents
* in the range start - end. hint_block is filled in with a block number
*/
noinline int btrfs_drop_extents(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct inode *inode,
- u64 start, u64 end, u64 inline_limit, u64 *hint_byte)
+ u64 start, u64 end, u64 locked_end,
+ u64 inline_limit, u64 *hint_byte)
{
u64 extent_end = 0;
- u64 locked_end = end;
u64 search_start = start;
u64 leaf_start;
u64 ram_bytes = 0;
u64 orig_parent = 0;
u64 disk_bytenr = 0;
+ u64 orig_locked_end = locked_end;
u8 compression;
u8 encryption;
u16 other_encoding = 0;
}
out:
btrfs_free_path(path);
- if (locked_end > end) {
- unlock_extent(&BTRFS_I(inode)->io_tree, end, locked_end - 1,
- GFP_NOFS);
+ if (locked_end > orig_locked_end) {
+ unlock_extent(&BTRFS_I(inode)->io_tree, orig_locked_end,
+ locked_end - 1, GFP_NOFS);
}
- btrfs_check_file(root, inode);
return ret;
}
ret = btrfs_del_items(trans, root, path, del_slot, del_nr);
BUG_ON(ret);
- goto done;
+ goto release;
} else if (split == start) {
if (locked_end < extent_end) {
ret = try_lock_extent(&BTRFS_I(inode)->io_tree,
}
done:
btrfs_mark_buffer_dirty(leaf);
+
+release:
btrfs_release_path(root, path);
if (split_end && split == start) {
split = end;
if (will_write) {
btrfs_fdatawrite_range(inode->i_mapping, pos,
pos + write_bytes - 1,
- WB_SYNC_NONE);
+ WB_SYNC_ALL);
} else {
balance_dirty_pages_ratelimited_nr(inode->i_mapping,
num_pages);
printk(KERN_ERR "couldn't find space %llu to free\n",
(unsigned long long)offset);
printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
- block_group->cached, block_group->key.objectid,
- block_group->key.offset);
+ block_group->cached,
+ (unsigned long long)block_group->key.objectid,
+ (unsigned long long)block_group->key.offset);
btrfs_dump_free_space(block_group, bytes);
} else if (info) {
printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
"but wanted offset=%llu bytes=%llu\n",
- info->offset, info->bytes, offset, bytes);
+ (unsigned long long)info->offset,
+ (unsigned long long)info->bytes,
+ (unsigned long long)offset,
+ (unsigned long long)bytes);
}
WARN_ON(1);
}
info = rb_entry(n, struct btrfs_free_space, offset_index);
if (info->bytes >= bytes)
count++;
- printk(KERN_ERR "entry offset %llu, bytes %llu\n", info->offset,
- info->bytes);
+ printk(KERN_ERR "entry offset %llu, bytes %llu\n",
+ (unsigned long long)info->offset,
+ (unsigned long long)info->bytes);
}
printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
"\n", count);
}
path = btrfs_alloc_path();
BUG_ON(!path);
- search_start = max(search_start, BTRFS_FIRST_FREE_OBJECTID);
+ search_start = max(search_start, (u64)BTRFS_FIRST_FREE_OBJECTID);
search_key.objectid = search_start;
search_key.type = 0;
search_key.offset = 0;
static struct kmem_cache *btrfs_inode_cachep;
struct kmem_cache *btrfs_trans_handle_cachep;
struct kmem_cache *btrfs_transaction_cachep;
-struct kmem_cache *btrfs_bit_radix_cachep;
struct kmem_cache *btrfs_path_cachep;
#define S_SHIFT 12
}
ret = btrfs_drop_extents(trans, root, inode, start,
- aligned_end, start, &hint_byte);
+ aligned_end, aligned_end, start, &hint_byte);
BUG_ON(ret);
if (isize > actual_end)
struct inode *inode, u64 file_pos,
u64 disk_bytenr, u64 disk_num_bytes,
u64 num_bytes, u64 ram_bytes,
+ u64 locked_end,
u8 compression, u8 encryption,
u16 other_encoding, int extent_type)
{
path->leave_spinning = 1;
ret = btrfs_drop_extents(trans, root, inode, file_pos,
- file_pos + num_bytes, file_pos, &hint);
+ file_pos + num_bytes, locked_end,
+ file_pos, &hint);
BUG_ON(ret);
ins.objectid = inode->i_ino;
ordered_extent->disk_len,
ordered_extent->len,
ordered_extent->len,
+ ordered_extent->file_offset +
+ ordered_extent->len,
compressed, 0, 0,
BTRFS_FILE_EXTENT_REG);
BUG_ON(ret);
return 0;
zeroit:
- printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u "
- "private %llu\n", page->mapping->host->i_ino,
- (unsigned long long)start, csum,
- (unsigned long long)private);
+ if (printk_ratelimit()) {
+ printk(KERN_INFO "btrfs csum failed ino %lu off %llu csum %u "
+ "private %llu\n", page->mapping->host->i_ino,
+ (unsigned long long)start, csum,
+ (unsigned long long)private);
+ }
memset(kaddr + offset, 1, end - start + 1);
flush_dcache_page(page);
kunmap_atomic(kaddr, KM_USER0);
btrfs_free_path(path);
}
+/*
+ * very simple check to peek ahead in the leaf looking for xattrs. If we
+ * don't find any xattrs, we know there can't be any acls.
+ *
+ * slot is the slot the inode is in, objectid is the objectid of the inode
+ */
+static noinline int acls_after_inode_item(struct extent_buffer *leaf,
+ int slot, u64 objectid)
+{
+ u32 nritems = btrfs_header_nritems(leaf);
+ struct btrfs_key found_key;
+ int scanned = 0;
+
+ slot++;
+ while (slot < nritems) {
+ btrfs_item_key_to_cpu(leaf, &found_key, slot);
+
+ /* we found a different objectid, there must not be acls */
+ if (found_key.objectid != objectid)
+ return 0;
+
+ /* we found an xattr, assume we've got an acl */
+ if (found_key.type == BTRFS_XATTR_ITEM_KEY)
+ return 1;
+
+ /*
+ * we found a key greater than an xattr key, there can't
+ * be any acls later on
+ */
+ if (found_key.type > BTRFS_XATTR_ITEM_KEY)
+ return 0;
+
+ slot++;
+ scanned++;
+
+ /*
+ * it goes inode, inode backrefs, xattrs, extents,
+ * so if there are a ton of hard links to an inode there can
+ * be a lot of backrefs. Don't waste time searching too hard,
+ * this is just an optimization
+ */
+ if (scanned >= 8)
+ break;
+ }
+ /* we hit the end of the leaf before we found an xattr or
+ * something larger than an xattr. We have to assume the inode
+ * has acls
+ */
+ return 1;
+}
+
/*
* read an inode from the btree into the in-memory inode
*/
struct btrfs_timespec *tspec;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key location;
+ int maybe_acls;
u64 alloc_group_block;
u32 rdev;
int ret;
alloc_group_block = btrfs_inode_block_group(leaf, inode_item);
+ /*
+ * try to precache a NULL acl entry for files that don't have
+ * any xattrs or acls
+ */
+ maybe_acls = acls_after_inode_item(leaf, path->slots[0], inode->i_ino);
+ if (!maybe_acls) {
+ BTRFS_I(inode)->i_acl = NULL;
+ BTRFS_I(inode)->i_default_acl = NULL;
+ }
+
BTRFS_I(inode)->block_group = btrfs_find_block_group(root, 0,
alloc_group_block, 0);
btrfs_free_path(path);
err = btrfs_drop_extents(trans, root, inode,
cur_offset,
cur_offset + hole_size,
+ block_end,
cur_offset, &hint_byte);
if (err)
break;
{
struct btrfs_inode *bi = BTRFS_I(inode);
- bi->i_acl = NULL;
- bi->i_default_acl = NULL;
+ bi->i_acl = BTRFS_ACL_NOT_CACHED;
+ bi->i_default_acl = BTRFS_ACL_NOT_CACHED;
bi->generation = 0;
bi->sequence = 0;
bi->flags = 0;
bi->index_cnt = (u64)-1;
bi->last_unlink_trans = 0;
+ bi->ordered_data_close = 0;
extent_map_tree_init(&BTRFS_I(inode)->extent_tree, GFP_NOFS);
extent_io_tree_init(&BTRFS_I(inode)->io_tree,
inode->i_mapping, GFP_NOFS);
}
if (err) {
free_extent_map(em);
- WARN_ON(1);
return ERR_PTR(err);
}
return em;
kmem_cache_destroy(btrfs_trans_handle_cachep);
if (btrfs_transaction_cachep)
kmem_cache_destroy(btrfs_transaction_cachep);
- if (btrfs_bit_radix_cachep)
- kmem_cache_destroy(btrfs_bit_radix_cachep);
if (btrfs_path_cachep)
kmem_cache_destroy(btrfs_path_cachep);
}
-struct kmem_cache *btrfs_cache_create(const char *name, size_t size,
- unsigned long extra_flags,
- void (*ctor)(void *))
-{
- return kmem_cache_create(name, size, 0, (SLAB_RECLAIM_ACCOUNT |
- SLAB_MEM_SPREAD | extra_flags), ctor);
-}
-
int btrfs_init_cachep(void)
{
- btrfs_inode_cachep = btrfs_cache_create("btrfs_inode_cache",
- sizeof(struct btrfs_inode),
- 0, init_once);
+ btrfs_inode_cachep = kmem_cache_create("btrfs_inode_cache",
+ sizeof(struct btrfs_inode), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, init_once);
if (!btrfs_inode_cachep)
goto fail;
- btrfs_trans_handle_cachep =
- btrfs_cache_create("btrfs_trans_handle_cache",
- sizeof(struct btrfs_trans_handle),
- 0, NULL);
+
+ btrfs_trans_handle_cachep = kmem_cache_create("btrfs_trans_handle_cache",
+ sizeof(struct btrfs_trans_handle), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!btrfs_trans_handle_cachep)
goto fail;
- btrfs_transaction_cachep = btrfs_cache_create("btrfs_transaction_cache",
- sizeof(struct btrfs_transaction),
- 0, NULL);
+
+ btrfs_transaction_cachep = kmem_cache_create("btrfs_transaction_cache",
+ sizeof(struct btrfs_transaction), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!btrfs_transaction_cachep)
goto fail;
- btrfs_path_cachep = btrfs_cache_create("btrfs_path_cache",
- sizeof(struct btrfs_path),
- 0, NULL);
+
+ btrfs_path_cachep = kmem_cache_create("btrfs_path_cache",
+ sizeof(struct btrfs_path), 0,
+ SLAB_RECLAIM_ACCOUNT | SLAB_MEM_SPREAD, NULL);
if (!btrfs_path_cachep)
goto fail;
- btrfs_bit_radix_cachep = btrfs_cache_create("btrfs_radix", 256,
- SLAB_DESTROY_BY_RCU, NULL);
- if (!btrfs_bit_radix_cachep)
- goto fail;
+
return 0;
fail:
btrfs_destroy_cachep();
return err;
}
-static int prealloc_file_range(struct inode *inode, u64 start, u64 end,
- u64 alloc_hint, int mode)
+static int prealloc_file_range(struct btrfs_trans_handle *trans,
+ struct inode *inode, u64 start, u64 end,
+ u64 locked_end, u64 alloc_hint, int mode)
{
- struct btrfs_trans_handle *trans;
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key ins;
u64 alloc_size;
u64 num_bytes = end - start;
int ret = 0;
- trans = btrfs_join_transaction(root, 1);
- BUG_ON(!trans);
- btrfs_set_trans_block_group(trans, inode);
-
while (num_bytes > 0) {
alloc_size = min(num_bytes, root->fs_info->max_extent);
ret = btrfs_reserve_extent(trans, root, alloc_size,
ret = insert_reserved_file_extent(trans, inode,
cur_offset, ins.objectid,
ins.offset, ins.offset,
- ins.offset, 0, 0, 0,
+ ins.offset, locked_end,
+ 0, 0, 0,
BTRFS_FILE_EXTENT_PREALLOC);
BUG_ON(ret);
num_bytes -= ins.offset;
BUG_ON(ret);
}
- btrfs_end_transaction(trans, root);
return ret;
}
u64 alloc_start;
u64 alloc_end;
u64 alloc_hint = 0;
+ u64 locked_end;
u64 mask = BTRFS_I(inode)->root->sectorsize - 1;
struct extent_map *em;
+ struct btrfs_trans_handle *trans;
int ret;
alloc_start = offset & ~mask;
alloc_end = (offset + len + mask) & ~mask;
+ /*
+ * wait for ordered IO before we have any locks. We'll loop again
+ * below with the locks held.
+ */
+ btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start);
+
mutex_lock(&inode->i_mutex);
if (alloc_start > inode->i_size) {
ret = btrfs_cont_expand(inode, alloc_start);
goto out;
}
+ locked_end = alloc_end - 1;
while (1) {
struct btrfs_ordered_extent *ordered;
- lock_extent(&BTRFS_I(inode)->io_tree, alloc_start,
- alloc_end - 1, GFP_NOFS);
+
+ trans = btrfs_start_transaction(BTRFS_I(inode)->root, 1);
+ if (!trans) {
+ ret = -EIO;
+ goto out;
+ }
+
+ /* the extent lock is ordered inside the running
+ * transaction
+ */
+ lock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
+ GFP_NOFS);
ordered = btrfs_lookup_first_ordered_extent(inode,
alloc_end - 1);
if (ordered &&
ordered->file_offset < alloc_end) {
btrfs_put_ordered_extent(ordered);
unlock_extent(&BTRFS_I(inode)->io_tree,
- alloc_start, alloc_end - 1, GFP_NOFS);
+ alloc_start, locked_end, GFP_NOFS);
+ btrfs_end_transaction(trans, BTRFS_I(inode)->root);
+
+ /*
+ * we can't wait on the range with the transaction
+ * running or with the extent lock held
+ */
btrfs_wait_ordered_range(inode, alloc_start,
alloc_end - alloc_start);
} else {
last_byte = min(extent_map_end(em), alloc_end);
last_byte = (last_byte + mask) & ~mask;
if (em->block_start == EXTENT_MAP_HOLE) {
- ret = prealloc_file_range(inode, cur_offset,
- last_byte, alloc_hint, mode);
+ ret = prealloc_file_range(trans, inode, cur_offset,
+ last_byte, locked_end + 1,
+ alloc_hint, mode);
if (ret < 0) {
free_extent_map(em);
break;
break;
}
}
- unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, alloc_end - 1,
+ unlock_extent(&BTRFS_I(inode)->io_tree, alloc_start, locked_end,
GFP_NOFS);
+
+ btrfs_end_transaction(trans, BTRFS_I(inode)->root);
out:
mutex_unlock(&inode->i_mutex);
return ret;
return 0;
}
-/*
- * Called inside transaction, so use GFP_NOFS
- */
-
static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
{
u64 new_size;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
-
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
namelen = strlen(vol_args->name);
*devstr = '\0';
devstr = vol_args->name;
devid = simple_strtoull(devstr, &end, 10);
- printk(KERN_INFO "resizing devid %llu\n", devid);
+ printk(KERN_INFO "resizing devid %llu\n",
+ (unsigned long long)devid);
}
device = btrfs_find_device(root, devid, NULL, NULL);
if (!device) {
- printk(KERN_INFO "resizer unable to find device %llu\n", devid);
+ printk(KERN_INFO "resizer unable to find device %llu\n",
+ (unsigned long long)devid);
ret = -EINVAL;
goto out_unlock;
}
out_unlock:
mutex_unlock(&root->fs_info->volume_mutex);
-out:
kfree(vol_args);
return ret;
}
if (root->fs_info->sb->s_flags & MS_RDONLY)
return -EROFS;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
-
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
namelen = strlen(vol_args->name);
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
ret = btrfs_init_new_device(root, vol_args->name);
-out:
kfree(vol_args);
return ret;
}
if (root->fs_info->sb->s_flags & MS_RDONLY)
return -EROFS;
- vol_args = kmalloc(sizeof(*vol_args), GFP_NOFS);
-
- if (!vol_args)
- return -ENOMEM;
+ vol_args = memdup_user(arg, sizeof(*vol_args));
+ if (IS_ERR(vol_args))
+ return PTR_ERR(vol_args);
- if (copy_from_user(vol_args, arg, sizeof(*vol_args))) {
- ret = -EFAULT;
- goto out;
- }
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
ret = btrfs_rm_device(root, vol_args->name);
-out:
kfree(vol_args);
return ret;
}
BUG_ON(!trans);
/* punch hole in destination first */
- btrfs_drop_extents(trans, root, inode, off, off+len, 0, &hint_byte);
+ btrfs_drop_extents(trans, root, inode, off, off + len,
+ off + len, 0, &hint_byte);
/* clone data */
key.objectid = src->i_ino;
/* start IO across the range first to instantiate any delalloc
* extents
*/
- btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_NONE);
+ btrfs_fdatawrite_range(inode->i_mapping, start, orig_end, WB_SYNC_ALL);
/* The compression code will leave pages locked but return from
* writepage without setting the page writeback. Starting again
Opt_degraded, Opt_subvol, Opt_device, Opt_nodatasum, Opt_nodatacow,
Opt_max_extent, Opt_max_inline, Opt_alloc_start, Opt_nobarrier,
Opt_ssd, Opt_thread_pool, Opt_noacl, Opt_compress, Opt_notreelog,
- Opt_flushoncommit, Opt_err,
+ Opt_ratio, Opt_flushoncommit, Opt_err,
};
static match_table_t tokens = {
{Opt_noacl, "noacl"},
{Opt_notreelog, "notreelog"},
{Opt_flushoncommit, "flushoncommit"},
+ {Opt_ratio, "metadata_ratio=%d"},
{Opt_err, NULL},
};
info->max_extent = max_t(u64,
info->max_extent, root->sectorsize);
printk(KERN_INFO "btrfs: max_extent at %llu\n",
- info->max_extent);
+ (unsigned long long)info->max_extent);
}
break;
case Opt_max_inline:
root->sectorsize);
}
printk(KERN_INFO "btrfs: max_inline at %llu\n",
- info->max_inline);
+ (unsigned long long)info->max_inline);
}
break;
case Opt_alloc_start:
kfree(num);
printk(KERN_INFO
"btrfs: allocations start at %llu\n",
- info->alloc_start);
+ (unsigned long long)info->alloc_start);
}
break;
case Opt_noacl:
printk(KERN_INFO "btrfs: turning on flush-on-commit\n");
btrfs_set_opt(info->mount_opt, FLUSHONCOMMIT);
break;
+ case Opt_ratio:
+ intarg = 0;
+ match_int(&args[0], &intarg);
+ if (intarg) {
+ info->metadata_ratio = intarg;
+ printk(KERN_INFO "btrfs: metadata ratio %d\n",
+ info->metadata_ratio);
+ }
+ break;
default:
break;
}
if (btrfs_test_opt(root, NOBARRIER))
seq_puts(seq, ",nobarrier");
if (info->max_extent != (u64)-1)
- seq_printf(seq, ",max_extent=%llu", info->max_extent);
+ seq_printf(seq, ",max_extent=%llu",
+ (unsigned long long)info->max_extent);
if (info->max_inline != 8192 * 1024)
- seq_printf(seq, ",max_inline=%llu", info->max_inline);
+ seq_printf(seq, ",max_inline=%llu",
+ (unsigned long long)info->max_inline);
if (info->alloc_start != 0)
- seq_printf(seq, ",alloc_start=%llu", info->alloc_start);
+ seq_printf(seq, ",alloc_start=%llu",
+ (unsigned long long)info->alloc_start);
if (info->thread_pool_size != min_t(unsigned long,
num_online_cpus() + 2, 8))
seq_printf(seq, ",thread_pool=%d", info->thread_pool_size);
if (btrfs_test_opt(root, SSD))
seq_puts(seq, ",ssd");
if (btrfs_test_opt(root, NOTREELOG))
- seq_puts(seq, ",no-treelog");
+ seq_puts(seq, ",notreelog");
if (btrfs_test_opt(root, FLUSHONCOMMIT))
- seq_puts(seq, ",flush-on-commit");
+ seq_puts(seq, ",flushoncommit");
if (!(root->fs_info->sb->s_flags & MS_POSIXACL))
seq_puts(seq, ",noacl");
return 0;
if (s->s_root) {
if ((flags ^ s->s_flags) & MS_RDONLY) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = -EBUSY;
goto error_close_devices;
}
error = btrfs_fill_super(s, fs_devices, data,
flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto error_free_subvol_name;
}
mutex_unlock(&s->s_root->d_inode->i_mutex);
if (IS_ERR(root)) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = PTR_ERR(root);
goto error_free_subvol_name;
}
if (!root->d_inode) {
dput(root);
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = -ENXIO;
goto error_free_subvol_name;
}
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- vol = kmalloc(sizeof(*vol), GFP_KERNEL);
- if (!vol)
- return -ENOMEM;
-
- if (copy_from_user(vol, (void __user *)arg, sizeof(*vol))) {
- ret = -EFAULT;
- goto out;
- }
+ vol = memdup_user((void __user *)arg, sizeof(*vol));
+ if (IS_ERR(vol))
+ return PTR_ERR(vol);
switch (cmd) {
case BTRFS_IOC_SCAN_DEV:
&btrfs_fs_type, &fs_devices);
break;
}
-out:
+
kfree(vol);
return ret;
}
prepare_to_wait(&info->transaction_wait, &wait,
TASK_UNINTERRUPTIBLE);
mutex_unlock(&info->trans_mutex);
+
+ atomic_dec(&info->throttles);
+ wake_up(&info->transaction_throttle);
+
schedule();
+
+ atomic_inc(&info->throttles);
mutex_lock(&info->trans_mutex);
finish_wait(&info->transaction_wait, &wait);
}
saved_nbytes = inode_get_bytes(inode);
/* drop any overlapping extents */
ret = btrfs_drop_extents(trans, root, inode,
- start, extent_end, start, &alloc_hint);
+ start, extent_end, extent_end, start, &alloc_hint);
BUG_ON(ret);
if (found_type == BTRFS_FILE_EXTENT_REG ||
return NULL;
}
+static void requeue_list(struct btrfs_pending_bios *pending_bios,
+ struct bio *head, struct bio *tail)
+{
+
+ struct bio *old_head;
+
+ old_head = pending_bios->head;
+ pending_bios->head = head;
+ if (pending_bios->tail)
+ tail->bi_next = old_head;
+ else
+ pending_bios->tail = tail;
+}
+
/*
* we try to collect pending bios for a device so we don't get a large
* number of procs sending bios down to the same device. This greatly
struct bio *pending;
struct backing_dev_info *bdi;
struct btrfs_fs_info *fs_info;
+ struct btrfs_pending_bios *pending_bios;
struct bio *tail;
struct bio *cur;
int again = 0;
- unsigned long num_run = 0;
+ unsigned long num_run;
+ unsigned long num_sync_run;
unsigned long limit;
unsigned long last_waited = 0;
limit = btrfs_async_submit_limit(fs_info);
limit = limit * 2 / 3;
+ /* we want to make sure that every time we switch from the sync
+ * list to the normal list, we unplug
+ */
+ num_sync_run = 0;
+
loop:
spin_lock(&device->io_lock);
+ num_run = 0;
loop_lock:
+
/* take all the bios off the list at once and process them
* later on (without the lock held). But, remember the
* tail and other pointers so the bios can be properly reinserted
* into the list if we hit congestion
*/
- pending = device->pending_bios;
- tail = device->pending_bio_tail;
+ if (device->pending_sync_bios.head)
+ pending_bios = &device->pending_sync_bios;
+ else
+ pending_bios = &device->pending_bios;
+
+ pending = pending_bios->head;
+ tail = pending_bios->tail;
WARN_ON(pending && !tail);
- device->pending_bios = NULL;
- device->pending_bio_tail = NULL;
/*
* if pending was null this time around, no bios need processing
* device->running_pending is used to synchronize with the
* schedule_bio code.
*/
- if (pending) {
- again = 1;
- device->running_pending = 1;
- } else {
+ if (device->pending_sync_bios.head == NULL &&
+ device->pending_bios.head == NULL) {
again = 0;
device->running_pending = 0;
+ } else {
+ again = 1;
+ device->running_pending = 1;
}
+
+ pending_bios->head = NULL;
+ pending_bios->tail = NULL;
+
spin_unlock(&device->io_lock);
+ /*
+ * if we're doing the regular priority list, make sure we unplug
+ * for any high prio bios we've sent down
+ */
+ if (pending_bios == &device->pending_bios && num_sync_run > 0) {
+ num_sync_run = 0;
+ blk_run_backing_dev(bdi, NULL);
+ }
+
while (pending) {
+
+ rmb();
+ if (pending_bios != &device->pending_sync_bios &&
+ device->pending_sync_bios.head &&
+ num_run > 16) {
+ cond_resched();
+ spin_lock(&device->io_lock);
+ requeue_list(pending_bios, pending, tail);
+ goto loop_lock;
+ }
+
cur = pending;
pending = pending->bi_next;
cur->bi_next = NULL;
wake_up(&fs_info->async_submit_wait);
BUG_ON(atomic_read(&cur->bi_cnt) == 0);
- bio_get(cur);
submit_bio(cur->bi_rw, cur);
- bio_put(cur);
num_run++;
+ if (bio_sync(cur))
+ num_sync_run++;
+
+ if (need_resched()) {
+ if (num_sync_run) {
+ blk_run_backing_dev(bdi, NULL);
+ num_sync_run = 0;
+ }
+ cond_resched();
+ }
/*
* we made progress, there is more work to do and the bdi
*/
if (pending && bdi_write_congested(bdi) && num_run > 16 &&
fs_info->fs_devices->open_devices > 1) {
- struct bio *old_head;
struct io_context *ioc;
ioc = current->io_context;
* against it before looping
*/
last_waited = ioc->last_waited;
+ if (need_resched()) {
+ if (num_sync_run) {
+ blk_run_backing_dev(bdi, NULL);
+ num_sync_run = 0;
+ }
+ cond_resched();
+ }
continue;
}
spin_lock(&device->io_lock);
-
- old_head = device->pending_bios;
- device->pending_bios = pending;
- if (device->pending_bio_tail)
- tail->bi_next = old_head;
- else
- device->pending_bio_tail = tail;
-
+ requeue_list(pending_bios, pending, tail);
device->running_pending = 1;
spin_unlock(&device->io_lock);
goto done;
}
}
+
+ if (num_sync_run) {
+ num_sync_run = 0;
+ blk_run_backing_dev(bdi, NULL);
+ }
+
+ cond_resched();
if (again)
goto loop;
spin_lock(&device->io_lock);
- if (device->pending_bios)
+ if (device->pending_bios.head || device->pending_sync_bios.head)
goto loop_lock;
spin_unlock(&device->io_lock);
btrfs_set_device_io_align(leaf, dev_item, device->io_align);
btrfs_set_device_io_width(leaf, dev_item, device->io_width);
btrfs_set_device_sector_size(leaf, dev_item, device->sector_size);
- btrfs_set_device_total_bytes(leaf, dev_item, device->total_bytes);
+ btrfs_set_device_total_bytes(leaf, dev_item, device->disk_total_bytes);
btrfs_set_device_bytes_used(leaf, dev_item, device->bytes_used);
btrfs_mark_buffer_dirty(leaf);
device->total_bytes = new_size;
if (device->writeable)
device->fs_devices->total_rw_bytes -= diff;
- ret = btrfs_update_device(trans, device);
- if (ret) {
- unlock_chunks(root);
- btrfs_end_transaction(trans, root);
- goto done;
- }
- WARN_ON(diff > old_total);
- btrfs_set_super_total_bytes(super_copy, old_total - diff);
unlock_chunks(root);
btrfs_end_transaction(trans, root);
length = btrfs_dev_extent_length(l, dev_extent);
if (key.offset + length <= new_size)
- goto done;
+ break;
chunk_tree = btrfs_dev_extent_chunk_tree(l, dev_extent);
chunk_objectid = btrfs_dev_extent_chunk_objectid(l, dev_extent);
goto done;
}
+ /* Shrinking succeeded, else we would be at "done". */
+ trans = btrfs_start_transaction(root, 1);
+ if (!trans) {
+ ret = -ENOMEM;
+ goto done;
+ }
+ lock_chunks(root);
+
+ device->disk_total_bytes = new_size;
+ /* Now btrfs_update_device() will change the on-disk size. */
+ ret = btrfs_update_device(trans, device);
+ if (ret) {
+ unlock_chunks(root);
+ btrfs_end_transaction(trans, root);
+ goto done;
+ }
+ WARN_ON(diff > old_total);
+ btrfs_set_super_total_bytes(super_copy, old_total - diff);
+ unlock_chunks(root);
+ btrfs_end_transaction(trans, root);
done:
btrfs_free_path(path);
return ret;
max_errors = 1;
}
}
- if (multi_ret && rw == WRITE &&
+ if (multi_ret && (rw & (1 << BIO_RW)) &&
stripes_allocated < stripes_required) {
stripes_allocated = map->num_stripes;
free_extent_map(em);
int rw, struct bio *bio)
{
int should_queue = 1;
+ struct btrfs_pending_bios *pending_bios;
/* don't bother with additional async steps for reads, right now */
if (!(rw & (1 << BIO_RW))) {
bio->bi_rw |= rw;
spin_lock(&device->io_lock);
+ if (bio_sync(bio))
+ pending_bios = &device->pending_sync_bios;
+ else
+ pending_bios = &device->pending_bios;
- if (device->pending_bio_tail)
- device->pending_bio_tail->bi_next = bio;
+ if (pending_bios->tail)
+ pending_bios->tail->bi_next = bio;
- device->pending_bio_tail = bio;
- if (!device->pending_bios)
- device->pending_bios = bio;
+ pending_bios->tail = bio;
+ if (!pending_bios->head)
+ pending_bios->head = bio;
if (device->running_pending)
should_queue = 0;
unsigned long ptr;
device->devid = btrfs_device_id(leaf, dev_item);
- device->total_bytes = btrfs_device_total_bytes(leaf, dev_item);
+ device->disk_total_bytes = btrfs_device_total_bytes(leaf, dev_item);
+ device->total_bytes = device->disk_total_bytes;
device->bytes_used = btrfs_device_bytes_used(leaf, dev_item);
device->type = btrfs_device_type(leaf, dev_item);
device->io_align = btrfs_device_io_align(leaf, dev_item);
#include "async-thread.h"
struct buffer_head;
+struct btrfs_pending_bios {
+ struct bio *head;
+ struct bio *tail;
+};
+
struct btrfs_device {
struct list_head dev_list;
struct list_head dev_alloc_list;
struct btrfs_fs_devices *fs_devices;
struct btrfs_root *dev_root;
- struct bio *pending_bios;
- struct bio *pending_bio_tail;
+
+ /* regular prio bios */
+ struct btrfs_pending_bios pending_bios;
+ /* WRITE_SYNC bios */
+ struct btrfs_pending_bios pending_sync_bios;
+
int running_pending;
u64 generation;
/* size of the device */
u64 total_bytes;
+ /* size of the disk */
+ u64 disk_total_bytes;
+
/* bytes used */
u64 bytes_used;
* Completion handler for block_write_full_page() - pages which are unlocked
* during I/O, and which have PageWriteback cleared upon I/O completion.
*/
-static void end_buffer_async_write(struct buffer_head *bh, int uptodate)
+void end_buffer_async_write(struct buffer_head *bh, int uptodate)
{
char b[BDEVNAME_SIZE];
unsigned long flags;
set_buffer_async_read(bh);
}
-void mark_buffer_async_write(struct buffer_head *bh)
+void mark_buffer_async_write_endio(struct buffer_head *bh,
+ bh_end_io_t *handler)
{
- bh->b_end_io = end_buffer_async_write;
+ bh->b_end_io = handler;
set_buffer_async_write(bh);
}
+
+void mark_buffer_async_write(struct buffer_head *bh)
+{
+ mark_buffer_async_write_endio(bh, end_buffer_async_write);
+}
EXPORT_SYMBOL(mark_buffer_async_write);
return err;
}
-void do_thaw_all(unsigned long unused)
+void do_thaw_all(struct work_struct *work)
{
struct super_block *sb;
char b[BDEVNAME_SIZE];
goto restart;
}
spin_unlock(&sb_lock);
+ kfree(work);
printk(KERN_WARNING "Emergency Thaw complete\n");
}
*/
void emergency_thaw_all(void)
{
- pdflush_operation(do_thaw_all, 0);
+ struct work_struct *work;
+
+ work = kmalloc(sizeof(*work), GFP_ATOMIC);
+ if (work) {
+ INIT_WORK(work, do_thaw_all);
+ schedule_work(work);
+ }
}
/**
* unplugging the device queue.
*/
static int __block_write_full_page(struct inode *inode, struct page *page,
- get_block_t *get_block, struct writeback_control *wbc)
+ get_block_t *get_block, struct writeback_control *wbc,
+ bh_end_io_t *handler)
{
int err;
sector_t block;
continue;
}
if (test_clear_buffer_dirty(bh)) {
- mark_buffer_async_write(bh);
+ mark_buffer_async_write_endio(bh, handler);
} else {
unlock_buffer(bh);
}
if (buffer_mapped(bh) && buffer_dirty(bh) &&
!buffer_delay(bh)) {
lock_buffer(bh);
- mark_buffer_async_write(bh);
+ mark_buffer_async_write_endio(bh, handler);
} else {
/*
* The buffer may have been set dirty during
if ((page->mapping != inode->i_mapping) ||
(page_offset(page) > size)) {
/* page got truncated out from underneath us */
- goto out_unlock;
+ unlock_page(page);
+ goto out;
}
/* page is wholly or partially inside EOF */
ret = block_commit_write(page, 0, end);
if (unlikely(ret)) {
+ unlock_page(page);
if (ret == -ENOMEM)
ret = VM_FAULT_OOM;
else /* -ENOSPC, -EIO, etc */
ret = VM_FAULT_SIGBUS;
- }
+ } else
+ ret = VM_FAULT_LOCKED;
-out_unlock:
- unlock_page(page);
+out:
return ret;
}
out:
ret = mpage_writepage(page, get_block, wbc);
if (ret == -EAGAIN)
- ret = __block_write_full_page(inode, page, get_block, wbc);
+ ret = __block_write_full_page(inode, page, get_block, wbc,
+ end_buffer_async_write);
return ret;
}
EXPORT_SYMBOL(nobh_writepage);
/*
* The generic ->writepage function for buffer-backed address_spaces
+ * this form passes in the end_io handler used to finish the IO.
*/
-int block_write_full_page(struct page *page, get_block_t *get_block,
- struct writeback_control *wbc)
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+ struct writeback_control *wbc, bh_end_io_t *handler)
{
struct inode * const inode = page->mapping->host;
loff_t i_size = i_size_read(inode);
/* Is the page fully inside i_size? */
if (page->index < end_index)
- return __block_write_full_page(inode, page, get_block, wbc);
+ return __block_write_full_page(inode, page, get_block, wbc,
+ handler);
/* Is the page fully outside i_size? (truncate in progress) */
offset = i_size & (PAGE_CACHE_SIZE-1);
* writes to that region are not written out to the file."
*/
zero_user_segment(page, offset, PAGE_CACHE_SIZE);
- return __block_write_full_page(inode, page, get_block, wbc);
+ return __block_write_full_page(inode, page, get_block, wbc, handler);
+}
+
+/*
+ * The generic ->writepage function for buffer-backed address_spaces
+ */
+int block_write_full_page(struct page *page, get_block_t *get_block,
+ struct writeback_control *wbc)
+{
+ return block_write_full_page_endio(page, get_block, wbc,
+ end_buffer_async_write);
}
+
sector_t generic_block_bmap(struct address_space *mapping, sector_t block,
get_block_t *get_block)
{
EXPORT_SYMBOL(block_sync_page);
EXPORT_SYMBOL(block_truncate_page);
EXPORT_SYMBOL(block_write_full_page);
+EXPORT_SYMBOL(block_write_full_page_endio);
EXPORT_SYMBOL(cont_write_begin);
EXPORT_SYMBOL(end_buffer_read_sync);
EXPORT_SYMBOL(end_buffer_write_sync);
+EXPORT_SYMBOL(end_buffer_async_write);
EXPORT_SYMBOL(file_fsync);
EXPORT_SYMBOL(generic_block_bmap);
EXPORT_SYMBOL(generic_cont_expand_simple);
+Version 1.58
+------------
+Guard against buffer overruns in various UCS-2 to UTF-8 string conversions
+when the UTF-8 string is composed of unusually long (more than 4 byte) converted
+characters. Add support for mounting root of a share which redirects immediately
+to DFS target. Convert string conversion functions from Unicode to more
+accurately mark string length before allocating memory (which may help the
+rare cases where a UTF-8 string is much larger than the UCS2 string that
+we converted from). Fix endianness of the vcnum field used during
+session setup to distinguish multiple mounts to same server from different
+userids. Raw NTLMSSP fixed (it requires /proc/fs/cifs/experimental
+flag to be set to 2, and mount must enable krb5 to turn on extended security).
+
Version 1.57
------------
Improve support for multiple security contexts to the same server. We
fails to support it properly, as with Samba server versions prior to 3.3.2)
Fix "redzone overwritten" bug in cifs_put_tcon (CIFSTcon may allocate too
little memory for the "nativeFileSystem" field returned by the server
-during mount).
+during mount). Endian convert inode numbers if necessary (makes it easier
+to compare inode numbers on network files from big endian systems).
Version 1.56
------------
signing turned on in case buffer was modified
just before it was sent, also this flag will
be used to use the new experimental directory change
- notification code).
+ notification code). When set to 2 enables
+ an additional experimental feature, "raw ntlmssp"
+ session establishment support (which allows
+ specifying "sec=ntlmssp" on mount). The Linux cifs
+ module will use ntlmv2 authentication encapsulated
+ in "raw ntlmssp" (not using SPNEGO) when
+ "sec=ntlmssp" is specified on mount.
+ This support also requires building cifs with
+ the CONFIG_CIFS_EXPERIMENTAL configuration flag.
These experimental features and tracing can be enabled by changing flags in
/proc/fs/cifs (after the cifs module has been installed or built into the
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
for (i = 0; i < num_referrals; i++) {
+ int len;
dump_referral(referrals+i);
- /* connect to a storage node */
- if (referrals[i].flags & DFSREF_STORAGE_SERVER) {
- int len;
- len = strlen(referrals[i].node_name);
- if (len < 2) {
- cERROR(1, ("%s: Net Address path too short: %s",
+ /* connect to a node */
+ len = strlen(referrals[i].node_name);
+ if (len < 2) {
+ cERROR(1, ("%s: Net Address path too short: %s",
__func__, referrals[i].node_name));
- rc = -EINVAL;
- goto out_err;
- }
- mnt = cifs_dfs_do_refmount(nd->path.mnt,
- nd->path.dentry,
- referrals + i);
- cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p",
- __func__,
+ rc = -EINVAL;
+ goto out_err;
+ }
+ mnt = cifs_dfs_do_refmount(nd->path.mnt,
+ nd->path.dentry, referrals + i);
+ cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__,
referrals[i].node_name, mnt));
- /* complete mount procedure if we accured submount */
- if (!IS_ERR(mnt))
- break;
- }
+ /* complete mount procedure if we accured submount */
+ if (!IS_ERR(mnt))
+ break;
}
/* we need it cause for() above could exit without valid submount */
/* attach the data */
memcpy(payload, data, datalen);
- rcu_assign_pointer(key->payload.data, payload);
+ key->payload.data = payload;
ret = 0;
error:
/*
* fs/cifs/cifs_unicode.c
*
- * Copyright (c) International Business Machines Corp., 2000,2005
+ * Copyright (c) International Business Machines Corp., 2000,2009
* Modified by Steve French (sfrench@us.ibm.com)
*
* This program is free software; you can redistribute it and/or modify
#include "cifs_debug.h"
/*
- * NAME: cifs_strfromUCS()
- *
- * FUNCTION: Convert little-endian unicode string to character string
+ * cifs_ucs2_bytes - how long will a string be after conversion?
+ * @ucs - pointer to input string
+ * @maxbytes - don't go past this many bytes of input string
+ * @codepage - destination codepage
*
+ * Walk a ucs2le string and return the number of bytes that the string will
+ * be after being converted to the given charset, not including any null
+ * termination required. Don't walk past maxbytes in the source buffer.
*/
int
-cifs_strfromUCS_le(char *to, const __le16 *from,
- int len, const struct nls_table *codepage)
+cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+ const struct nls_table *codepage)
{
int i;
- int outlen = 0;
+ int charlen, outlen = 0;
+ int maxwords = maxbytes / 2;
+ char tmp[NLS_MAX_CHARSET_SIZE];
- for (i = 0; (i < len) && from[i]; i++) {
- int charlen;
- /* 2.4.0 kernel or greater */
- charlen =
- codepage->uni2char(le16_to_cpu(from[i]), &to[outlen],
- NLS_MAX_CHARSET_SIZE);
- if (charlen > 0) {
+ for (i = 0; from[i] && i < maxwords; i++) {
+ charlen = codepage->uni2char(le16_to_cpu(from[i]), tmp,
+ NLS_MAX_CHARSET_SIZE);
+ if (charlen > 0)
outlen += charlen;
- } else {
- to[outlen++] = '?';
+ else
+ outlen++;
+ }
+
+ return outlen;
+}
+
+/*
+ * cifs_mapchar - convert a little-endian char to proper char in codepage
+ * @target - where converted character should be copied
+ * @src_char - 2 byte little-endian source character
+ * @cp - codepage to which character should be converted
+ * @mapchar - should character be mapped according to mapchars mount option?
+ *
+ * This function handles the conversion of a single character. It is the
+ * responsibility of the caller to ensure that the target buffer is large
+ * enough to hold the result of the conversion (at least NLS_MAX_CHARSET_SIZE).
+ */
+static int
+cifs_mapchar(char *target, const __le16 src_char, const struct nls_table *cp,
+ bool mapchar)
+{
+ int len = 1;
+
+ if (!mapchar)
+ goto cp_convert;
+
+ /*
+ * BB: Cannot handle remapping UNI_SLASH until all the calls to
+ * build_path_from_dentry are modified, as they use slash as
+ * separator.
+ */
+ switch (le16_to_cpu(src_char)) {
+ case UNI_COLON:
+ *target = ':';
+ break;
+ case UNI_ASTERIK:
+ *target = '*';
+ break;
+ case UNI_QUESTION:
+ *target = '?';
+ break;
+ case UNI_PIPE:
+ *target = '|';
+ break;
+ case UNI_GRTRTHAN:
+ *target = '>';
+ break;
+ case UNI_LESSTHAN:
+ *target = '<';
+ break;
+ default:
+ goto cp_convert;
+ }
+
+out:
+ return len;
+
+cp_convert:
+ len = cp->uni2char(le16_to_cpu(src_char), target,
+ NLS_MAX_CHARSET_SIZE);
+ if (len <= 0) {
+ *target = '?';
+ len = 1;
+ }
+ goto out;
+}
+
+/*
+ * cifs_from_ucs2 - convert utf16le string to local charset
+ * @to - destination buffer
+ * @from - source buffer
+ * @tolen - destination buffer size (in bytes)
+ * @fromlen - source buffer size (in bytes)
+ * @codepage - codepage to which characters should be converted
+ * @mapchar - should characters be remapped according to the mapchars option?
+ *
+ * Convert a little-endian ucs2le string (as sent by the server) to a string
+ * in the provided codepage. The tolen and fromlen parameters are to ensure
+ * that the code doesn't walk off of the end of the buffer (which is always
+ * a danger if the alignment of the source buffer is off). The destination
+ * string is always properly null terminated and fits in the destination
+ * buffer. Returns the length of the destination string in bytes (including
+ * null terminator).
+ *
+ * Note that some windows versions actually send multiword UTF-16 characters
+ * instead of straight UCS-2. The linux nls routines however aren't able to
+ * deal with those characters properly. In the event that we get some of
+ * those characters, they won't be translated properly.
+ */
+int
+cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+ const struct nls_table *codepage, bool mapchar)
+{
+ int i, charlen, safelen;
+ int outlen = 0;
+ int nullsize = nls_nullsize(codepage);
+ int fromwords = fromlen / 2;
+ char tmp[NLS_MAX_CHARSET_SIZE];
+
+ /*
+ * because the chars can be of varying widths, we need to take care
+ * not to overflow the destination buffer when we get close to the
+ * end of it. Until we get to this offset, we don't need to check
+ * for overflow however.
+ */
+ safelen = tolen - (NLS_MAX_CHARSET_SIZE + nullsize);
+
+ for (i = 0; i < fromwords && from[i]; i++) {
+ /*
+ * check to see if converting this character might make the
+ * conversion bleed into the null terminator
+ */
+ if (outlen >= safelen) {
+ charlen = cifs_mapchar(tmp, from[i], codepage, mapchar);
+ if ((outlen + charlen) > (tolen - nullsize))
+ break;
}
+
+ /* put converted char into 'to' buffer */
+ charlen = cifs_mapchar(&to[outlen], from[i], codepage, mapchar);
+ outlen += charlen;
}
- to[outlen] = 0;
+
+ /* properly null-terminate string */
+ for (i = 0; i < nullsize; i++)
+ to[outlen++] = 0;
+
return outlen;
}
return i;
}
+/*
+ * cifs_strndup_from_ucs - copy a string from wire format to the local codepage
+ * @src - source string
+ * @maxlen - don't walk past this many bytes in the source string
+ * @is_unicode - is this a unicode string?
+ * @codepage - destination codepage
+ *
+ * Take a string given by the server, convert it to the local codepage and
+ * put it in a new buffer. Returns a pointer to the new string or NULL on
+ * error.
+ */
+char *
+cifs_strndup_from_ucs(const char *src, const int maxlen, const bool is_unicode,
+ const struct nls_table *codepage)
+{
+ int len;
+ char *dst;
+
+ if (is_unicode) {
+ len = cifs_ucs2_bytes((__le16 *) src, maxlen, codepage);
+ len += nls_nullsize(codepage);
+ dst = kmalloc(len, GFP_KERNEL);
+ if (!dst)
+ return NULL;
+ cifs_from_ucs2(dst, (__le16 *) src, len, maxlen, codepage,
+ false);
+ } else {
+ len = strnlen(src, maxlen);
+ len++;
+ dst = kmalloc(len, GFP_KERNEL);
+ if (!dst)
+ return NULL;
+ strlcpy(dst, src, len);
+ }
+
+ return dst;
+}
+
* Convert a unicode character to upper or lower case using
* compressed tables.
*
- * Copyright (c) International Business Machines Corp., 2000,2007
+ * Copyright (c) International Business Machines Corp., 2000,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define UNIUPR_NOLOWER /* Example to not expand lower case tables */
+/*
+ * Windows maps these to the user defined 16 bit Unicode range since they are
+ * reserved symbols (along with \ and /), otherwise illegal to store
+ * in filenames in NTFS
+ */
+#define UNI_ASTERIK (__u16) ('*' + 0xF000)
+#define UNI_QUESTION (__u16) ('?' + 0xF000)
+#define UNI_COLON (__u16) (':' + 0xF000)
+#define UNI_GRTRTHAN (__u16) ('>' + 0xF000)
+#define UNI_LESSTHAN (__u16) ('<' + 0xF000)
+#define UNI_PIPE (__u16) ('|' + 0xF000)
+#define UNI_SLASH (__u16) ('\\' + 0xF000)
+
/* Just define what we want from uniupr.h. We don't want to define the tables
* in each source file.
*/
#endif /* UNIUPR_NOLOWER */
#ifdef __KERNEL__
-int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
+int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+ const struct nls_table *codepage, bool mapchar);
+int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+ const struct nls_table *codepage);
int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
+char *cifs_strndup_from_ucs(const char *src, const int maxlen,
+ const bool is_unicode,
+ const struct nls_table *codepage);
#endif
/*
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
+#include <linux/smp_lock.h>
#include "cifsfs.h"
#include "cifspdu.h"
#define DECLARE_GLOBALS_HERE
extern struct task_struct *oplockThread; /* remove sparse warning */
struct task_struct *oplockThread = NULL;
/* extern struct task_struct * dnotifyThread; remove sparse warning */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static struct task_struct *dnotifyThread = NULL;
-#endif
static const struct super_operations cifs_super_ops;
unsigned int CIFSMaxBufSize = CIFS_MAX_MSGSIZE;
module_param(CIFSMaxBufSize, int, 0);
cifs_inode->clientCanCacheAll = false;
cifs_inode->delete_pending = false;
cifs_inode->vfs_inode.i_blkbits = 14; /* 2**14 = CIFS_MAX_MSGSIZE */
+ cifs_inode->server_eof = 0;
/* Can not set i_flags here - they get immediately overwritten
to zero by the VFS */
if (tcon == NULL)
return;
+ lock_kernel();
read_lock(&cifs_tcp_ses_lock);
if (tcon->tc_count == 1)
tcon->tidStatus = CifsExiting;
}
/* BB FIXME - finish add checks for tidStatus BB */
+ unlock_kernel();
return;
}
rc = cifs_read_super(sb, data, dev_name, flags & MS_SILENT ? 1 : 0);
if (rc) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return rc;
}
sb->s_flags |= MS_ACTIVE;
return 0;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-static int cifs_dnotify_thread(void *dummyarg)
-{
- struct list_head *tmp;
- struct TCP_Server_Info *server;
-
- do {
- if (try_to_freeze())
- continue;
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(15*HZ);
- /* check if any stuck requests that need
- to be woken up and wakeq so the
- thread can wake up and error out */
- read_lock(&cifs_tcp_ses_lock);
- list_for_each(tmp, &cifs_tcp_ses_list) {
- server = list_entry(tmp, struct TCP_Server_Info,
- tcp_ses_list);
- if (atomic_read(&server->inFlight))
- wake_up_all(&server->response_q);
- }
- read_unlock(&cifs_tcp_ses_lock);
- } while (!kthread_should_stop());
-
- return 0;
-}
-#endif
-
static int __init
init_cifs(void)
{
goto out_unregister_dfs_key_type;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- dnotifyThread = kthread_run(cifs_dnotify_thread, NULL, "cifsdnotifyd");
- if (IS_ERR(dnotifyThread)) {
- rc = PTR_ERR(dnotifyThread);
- cERROR(1, ("error %d create dnotify thread", rc));
- goto out_stop_oplock_thread;
- }
-#endif
-
return 0;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- out_stop_oplock_thread:
-#endif
- kthread_stop(oplockThread);
out_unregister_dfs_key_type:
#ifdef CONFIG_CIFS_DFS_UPCALL
unregister_key_type(&key_type_dns_resolver);
cifs_destroy_inodecache();
cifs_destroy_mids();
cifs_destroy_request_bufs();
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- kthread_stop(dnotifyThread);
-#endif
kthread_stop(oplockThread);
}
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.57"
+#define CIFS_VERSION "1.58"
#endif /* _CIFSFS_H */
LANMAN, /* Legacy LANMAN auth */
NTLM, /* Legacy NTLM012 auth with NTLM hash */
NTLMv2, /* Legacy NTLM auth with NTLMv2 hash */
- RawNTLMSSP, /* NTLMSSP without SPNEGO */
- NTLMSSP, /* NTLMSSP via SPNEGO */
+ RawNTLMSSP, /* NTLMSSP without SPNEGO, NTLMv2 hash */
+ NTLMSSP, /* NTLMSSP via SPNEGO, NTLMv2 hash */
Kerberos, /* Kerberos via SPNEGO */
MSKerberos, /* MS Kerberos via SPNEGO */
};
bool invalidHandle:1; /* file closed via session abend */
bool messageMode:1; /* for pipes: message vs byte mode */
atomic_t wrtPending; /* handle in use - defer close */
- struct semaphore fh_sem; /* prevents reopen race after dead ses*/
+ struct mutex fh_mutex; /* prevents reopen race after dead ses*/
struct cifs_search_info srch_inf;
};
bool clientCanCacheAll:1; /* read and writebehind oplock */
bool oplockPending:1;
bool delete_pending:1; /* DELETE_ON_CLOSE is set */
+ u64 server_eof; /* current file size on server */
struct inode vfs_inode;
};
#define CIFSSEC_MAY_PLNTXT 0
#endif /* weak passwords */
#define CIFSSEC_MAY_SEAL 0x00040 /* not supported yet */
+#define CIFSSEC_MAY_NTLMSSP 0x00080 /* raw ntlmssp with ntlmv2 */
#define CIFSSEC_MUST_SIGN 0x01001
/* note that only one of the following can be set so the
#define CIFSSEC_MUST_LANMAN 0x10010
#define CIFSSEC_MUST_PLNTXT 0x20020
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0x3F03F /* allows weak security but also krb5 */
+#define CIFSSEC_MASK 0xAF0AF /* allows weak security but also krb5 */
#else
-#define CIFSSEC_MASK 0x37037 /* current flags supported if weak */
+#define CIFSSEC_MASK 0xA70A7 /* current flags supported if weak */
#endif /* UPCALL */
#else /* do not allow weak pw hash */
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0x0F00F /* flags supported if no weak allowed */
+#define CIFSSEC_MASK 0x8F08F /* flags supported if no weak allowed */
#else
-#define CIFSSEC_MASK 0x07007 /* flags supported if no weak allowed */
+#define CIFSSEC_MASK 0x87087 /* flags supported if no weak allowed */
#endif /* UPCALL */
#endif /* WEAK_PW_HASH */
#define CIFSSEC_MUST_SEAL 0x40040 /* not supported yet */
+#define CIFSSEC_MUST_NTLMSSP 0x80080 /* raw ntlmssp with ntlmv2 */
#define CIFSSEC_DEF (CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2)
#define CIFSSEC_MAX (CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2)
-#define CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5)
+#define CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5 | CIFSSEC_MAY_NTLMSSP)
/*
*****************************************************************
* All constants go here
__le32 Type;
__le64 DevMajor;
__le64 DevMinor;
- __u64 UniqueId;
+ __le64 UniqueId;
__le64 Permissions;
__le64 Nlinks;
} __attribute__((packed)) FILE_UNIX_BASIC_INFO; /* level 0x200 QPathInfo */
} __attribute__((packed));
struct file_internal_info {
- __u64 UniqueId; /* inode number */
+ __le64 UniqueId; /* inode number */
} __attribute__((packed)); /* level 0x3ee */
struct file_mode_info {
__le32 Type;
__le64 DevMajor;
__le64 DevMinor;
- __u64 UniqueId;
+ __le64 UniqueId;
__le64 Permissions;
__le64 Nlinks;
char FileName[1];
__le32 FileNameLength;
__le32 EaSize; /* EA size */
__le32 Reserved;
- __u64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
+ __le64 UniqueId; /* inode num - le since Samba puts ino in low 32 bit*/
char FileName[1];
} __attribute__((packed)) SEARCH_ID_FULL_DIR_INFO; /* level 0x105 FF rsp data */
const struct nls_table *nls_codepage);
extern int CIFSSMBUnixQuerySymLink(const int xid,
struct cifsTconInfo *tcon,
- const unsigned char *searchName,
- char *syminfo, const int buflen,
+ const unsigned char *searchName, char **syminfo,
const struct nls_table *nls_codepage);
extern int CIFSSMBQueryReparseLinkInfo(const int xid,
struct cifsTconInfo *tcon,
const unsigned char *searchName, __u64 *inode_number,
const struct nls_table *nls_codepage,
int remap_special_chars);
-extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
- const struct nls_table *codepage);
extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
const struct nls_table *cp, int mapChars);
/*
* fs/cifs/cifssmb.c
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Contains the routines for constructing the SMB PDUs themselves
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
-/* Allocates buffer into dst and copies smb string from src to it.
- * caller is responsible for freeing dst if function returned 0.
- * returns:
- * on success - 0
- * on failure - errno
- */
-static int
-cifs_strncpy_to_host(char **dst, const char *src, const int maxlen,
- const bool is_unicode, const struct nls_table *nls_codepage)
-{
- int plen;
-
- if (is_unicode) {
- plen = UniStrnlen((wchar_t *)src, maxlen);
- *dst = kmalloc(plen + 2, GFP_KERNEL);
- if (!*dst)
- goto cifs_strncpy_to_host_ErrExit;
- cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
- } else {
- plen = strnlen(src, maxlen);
- *dst = kmalloc(plen + 2, GFP_KERNEL);
- if (!*dst)
- goto cifs_strncpy_to_host_ErrExit;
- strncpy(*dst, src, plen);
- }
- (*dst)[plen] = 0;
- (*dst)[plen+1] = 0; /* harmless for ASCII case, needed for Unicode */
- return 0;
-
-cifs_strncpy_to_host_ErrExit:
- cERROR(1, ("Failed to allocate buffer for string\n"));
- return -ENOMEM;
-}
-
-
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
static void mark_open_files_invalid(struct cifsTconInfo *pTcon)
cFYI(1, ("Kerberos only mechanism, enable extended security"));
pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
}
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ else if ((secFlags & CIFSSEC_MUST_NTLMSSP) == CIFSSEC_MUST_NTLMSSP)
+ pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ else if ((secFlags & CIFSSEC_AUTH_MASK) == CIFSSEC_MAY_NTLMSSP) {
+ cFYI(1, ("NTLMSSP only mechanism, enable extended security"));
+ pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ }
+#endif
count = 0;
for (i = 0; i < CIFS_NUM_PROT; i++) {
server->secType = NTLMv2;
else if (secFlags & CIFSSEC_MAY_KRB5)
server->secType = Kerberos;
+ else if (secFlags & CIFSSEC_MAY_NTLMSSP)
+ server->secType = NTLMSSP;
else if (secFlags & CIFSSEC_MAY_LANMAN)
server->secType = LANMAN;
/* #ifdef CONFIG_CIFS_EXPERIMENTAL
int smb_hdr_len;
int resp_buf_type = 0;
+ *nbytes = 0;
+
cFYI(1, ("write2 at %lld %d bytes", (long long)offset, count));
if (tcon->ses->capabilities & CAP_LARGE_FILES) {
cifs_stats_inc(&tcon->num_writes);
if (rc) {
cFYI(1, ("Send error Write2 = %d", rc));
- *nbytes = 0;
} else if (resp_buf_type == 0) {
/* presumably this can not happen, but best to be safe */
rc = -EIO;
- *nbytes = 0;
} else {
WRITE_RSP *pSMBr = (WRITE_RSP *)iov[0].iov_base;
*nbytes = le16_to_cpu(pSMBr->CountHigh);
int
CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
- const unsigned char *searchName,
- char *symlinkinfo, const int buflen,
+ const unsigned char *searchName, char **symlinkinfo,
const struct nls_table *nls_codepage)
{
/* SMB_QUERY_FILE_UNIX_LINK */
int bytes_returned;
int name_len;
__u16 params, byte_count;
+ char *data_start;
cFYI(1, ("In QPathSymLinkInfo (Unix) for path %s", searchName));
/* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 2))
/* BB also check enough total bytes returned */
- rc = -EIO; /* bad smb */
+ if (rc || (pSMBr->ByteCount < 2))
+ rc = -EIO;
else {
- __u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
- __u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+ bool is_unicode;
+ u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+
+ data_start = ((char *) &pSMBr->hdr.Protocol) +
+ le16_to_cpu(pSMBr->t2.DataOffset);
+
+ if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
+ is_unicode = true;
+ else
+ is_unicode = false;
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = UniStrnlen((wchar_t *) ((char *)
- &pSMBr->hdr.Protocol + data_offset),
- min_t(const int, buflen, count) / 2);
/* BB FIXME investigate remapping reserved chars here */
- cifs_strfromUCS_le(symlinkinfo,
- (__le16 *) ((char *)&pSMBr->hdr.Protocol
- + data_offset),
- name_len, nls_codepage);
- } else {
- strncpy(symlinkinfo,
- (char *) &pSMBr->hdr.Protocol +
- data_offset,
- min_t(const int, buflen, count));
- }
- symlinkinfo[buflen] = 0;
- /* just in case so calling code does not go off the end of buffer */
+ *symlinkinfo = cifs_strndup_from_ucs(data_start, count,
+ is_unicode, nls_codepage);
+ if (!symlinkinfo)
+ rc = -ENOMEM;
}
}
cifs_buf_release(pSMB);
*pparmlen = parm_count;
return 0;
}
-#endif /* CIFS_EXPERIMENTAL */
int
CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
{
int rc = 0;
int bytes_returned;
- int name_len;
struct smb_com_transaction_ioctl_req *pSMB;
struct smb_com_transaction_ioctl_rsp *pSMBr;
} else { /* decode response */
__u32 data_offset = le32_to_cpu(pSMBr->DataOffset);
__u32 data_count = le32_to_cpu(pSMBr->DataCount);
- if ((pSMBr->ByteCount < 2) || (data_offset > 512))
+ if ((pSMBr->ByteCount < 2) || (data_offset > 512)) {
/* BB also check enough total bytes returned */
rc = -EIO; /* bad smb */
- else {
- if (data_count && (data_count < 2048)) {
- char *end_of_smb = 2 /* sizeof byte count */ +
- pSMBr->ByteCount +
- (char *)&pSMBr->ByteCount;
+ goto qreparse_out;
+ }
+ if (data_count && (data_count < 2048)) {
+ char *end_of_smb = 2 /* sizeof byte count */ +
+ pSMBr->ByteCount + (char *)&pSMBr->ByteCount;
- struct reparse_data *reparse_buf =
+ struct reparse_data *reparse_buf =
(struct reparse_data *)
((char *)&pSMBr->hdr.Protocol
+ data_offset);
- if ((char *)reparse_buf >= end_of_smb) {
- rc = -EIO;
- goto qreparse_out;
- }
- if ((reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset +
- reparse_buf->TargetNameLen) >
- end_of_smb) {
- cFYI(1, ("reparse buf beyond SMB"));
- rc = -EIO;
- goto qreparse_out;
- }
+ if ((char *)reparse_buf >= end_of_smb) {
+ rc = -EIO;
+ goto qreparse_out;
+ }
+ if ((reparse_buf->LinkNamesBuf +
+ reparse_buf->TargetNameOffset +
+ reparse_buf->TargetNameLen) > end_of_smb) {
+ cFYI(1, ("reparse buf beyond SMB"));
+ rc = -EIO;
+ goto qreparse_out;
+ }
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = UniStrnlen((wchar_t *)
+ if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
+ cifs_from_ucs2(symlinkinfo, (__le16 *)
(reparse_buf->LinkNamesBuf +
reparse_buf->TargetNameOffset),
- min(buflen/2,
- reparse_buf->TargetNameLen / 2));
- cifs_strfromUCS_le(symlinkinfo,
- (__le16 *) (reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset),
- name_len, nls_codepage);
- } else { /* ASCII names */
- strncpy(symlinkinfo,
- reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset,
- min_t(const int, buflen,
- reparse_buf->TargetNameLen));
- }
- } else {
- rc = -EIO;
- cFYI(1, ("Invalid return data count on "
- "get reparse info ioctl"));
+ buflen,
+ reparse_buf->TargetNameLen,
+ nls_codepage, 0);
+ } else { /* ASCII names */
+ strncpy(symlinkinfo,
+ reparse_buf->LinkNamesBuf +
+ reparse_buf->TargetNameOffset,
+ min_t(const int, buflen,
+ reparse_buf->TargetNameLen));
}
- symlinkinfo[buflen] = 0; /* just in case so the caller
- does not go off the end of the buffer */
- cFYI(1, ("readlink result - %s", symlinkinfo));
+ } else {
+ rc = -EIO;
+ cFYI(1, ("Invalid return data count on "
+ "get reparse info ioctl"));
}
+ symlinkinfo[buflen] = 0; /* just in case so the caller
+ does not go off the end of the buffer */
+ cFYI(1, ("readlink result - %s", symlinkinfo));
}
+
qreparse_out:
cifs_buf_release(pSMB);
return rc;
}
+#endif /* CIFS_EXPERIMENTAL */
#ifdef CONFIG_CIFS_POSIX
}
pfinfo = (struct file_internal_info *)
(data_offset + (char *) &pSMBr->hdr.Protocol);
- *inode_number = pfinfo->UniqueId;
+ *inode_number = le64_to_cpu(pfinfo->UniqueId);
}
}
GetInodeNumOut:
return rc;
}
-/* computes length of UCS string converted to host codepage
- * @src: UCS string
- * @maxlen: length of the input string in UCS characters
- * (not in bytes)
- *
- * return: size of input string in host codepage
- */
-static int hostlen_fromUCS(const __le16 *src, const int maxlen,
- const struct nls_table *nls_codepage) {
- int i;
- int hostlen = 0;
- char to[4];
- int charlen;
- for (i = 0; (i < maxlen) && src[i]; ++i) {
- charlen = nls_codepage->uni2char(le16_to_cpu(src[i]),
- to, NLS_MAX_CHARSET_SIZE);
- hostlen += charlen > 0 ? charlen : 1;
- }
- return hostlen;
-}
-
/* parses DFS refferal V3 structure
* caller is responsible for freeing target_nodes
* returns:
cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n",
*num_of_nodes,
- le16_to_cpu(pSMBr->DFSFlags)));
+ le32_to_cpu(pSMBr->DFSFlags)));
*target_nodes = kzalloc(sizeof(struct dfs_info3_param) *
*num_of_nodes, GFP_KERNEL);
int max_len;
struct dfs_info3_param *node = (*target_nodes)+i;
- node->flags = le16_to_cpu(pSMBr->DFSFlags);
+ node->flags = le32_to_cpu(pSMBr->DFSFlags);
if (is_unicode) {
__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
GFP_KERNEL);
cifsConvertToUCS((__le16 *) tmp, searchName,
PATH_MAX, nls_codepage, remap);
- node->path_consumed = hostlen_fromUCS(tmp,
- le16_to_cpu(pSMBr->PathConsumed)/2,
+ node->path_consumed = cifs_ucs2_bytes(tmp,
+ le16_to_cpu(pSMBr->PathConsumed),
nls_codepage);
kfree(tmp);
} else
/* copy DfsPath */
temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
max_len = data_end - temp;
- rc = cifs_strncpy_to_host(&(node->path_name), temp,
- max_len, is_unicode, nls_codepage);
- if (rc)
+ node->path_name = cifs_strndup_from_ucs(temp, max_len,
+ is_unicode, nls_codepage);
+ if (!node->path_name) {
+ rc = -ENOMEM;
goto parse_DFS_referrals_exit;
+ }
/* copy link target UNC */
temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
max_len = data_end - temp;
- rc = cifs_strncpy_to_host(&(node->node_name), temp,
- max_len, is_unicode, nls_codepage);
- if (rc)
- goto parse_DFS_referrals_exit;
-
- ref += le16_to_cpu(ref->Size);
+ node->node_name = cifs_strndup_from_ucs(temp, max_len,
+ is_unicode, nls_codepage);
+ if (!node->node_name)
+ rc = -ENOMEM;
}
parse_DFS_referrals_exit:
/*
* fs/cifs/connect.c
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
#include <linux/kthread.h>
#include <linux/pagevec.h>
#include <linux/freezer.h>
+#include <linux/namei.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
#include <net/ipv6.h>
return 1;
} else if (strnicmp(value, "krb5", 4) == 0) {
vol->secFlg |= CIFSSEC_MAY_KRB5;
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ } else if (strnicmp(value, "ntlmsspi", 8) == 0) {
+ vol->secFlg |= CIFSSEC_MAY_NTLMSSP |
+ CIFSSEC_MUST_SIGN;
+ } else if (strnicmp(value, "ntlmssp", 7) == 0) {
+ vol->secFlg |= CIFSSEC_MAY_NTLMSSP;
+#endif
} else if (strnicmp(value, "ntlmv2i", 7) == 0) {
vol->secFlg |= CIFSSEC_MAY_NTLMV2 |
CIFSSEC_MUST_SIGN;
return rc;
}
+static void
+cleanup_volume_info(struct smb_vol **pvolume_info)
+{
+ struct smb_vol *volume_info;
+
+ if (!pvolume_info && !*pvolume_info)
+ return;
+
+ volume_info = *pvolume_info;
+ kzfree(volume_info->password);
+ kfree(volume_info->UNC);
+ kfree(volume_info->prepath);
+ kfree(volume_info);
+ *pvolume_info = NULL;
+ return;
+}
+
+#ifdef CONFIG_CIFS_DFS_UPCALL
+/* build_path_to_root returns full path to root when
+ * we do not have an exiting connection (tcon) */
+static char *
+build_unc_path_to_root(const struct smb_vol *volume_info,
+ const struct cifs_sb_info *cifs_sb)
+{
+ char *full_path;
+
+ int unc_len = strnlen(volume_info->UNC, MAX_TREE_SIZE + 1);
+ full_path = kmalloc(unc_len + cifs_sb->prepathlen + 1, GFP_KERNEL);
+ if (full_path == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ strncpy(full_path, volume_info->UNC, unc_len);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) {
+ int i;
+ for (i = 0; i < unc_len; i++) {
+ if (full_path[i] == '\\')
+ full_path[i] = '/';
+ }
+ }
+
+ if (cifs_sb->prepathlen)
+ strncpy(full_path + unc_len, cifs_sb->prepath,
+ cifs_sb->prepathlen);
+
+ full_path[unc_len + cifs_sb->prepathlen] = 0; /* add trailing null */
+ return full_path;
+}
+#endif
+
int
cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
- char *mount_data, const char *devname)
+ char *mount_data_global, const char *devname)
{
int rc = 0;
int xid;
struct cifsTconInfo *tcon = NULL;
struct TCP_Server_Info *srvTcp = NULL;
char *full_path;
+ char *mount_data = mount_data_global;
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ struct dfs_info3_param *referrals = NULL;
+ unsigned int num_referrals = 0;
+ int referral_walks_count = 0;
+try_mount_again:
+#endif
+ full_path = NULL;
xid = GetXid();
}
}
- /* check for null share name ie connect to dfs root */
if ((strchr(volume_info->UNC + 3, '\\') == NULL)
&& (strchr(volume_info->UNC + 3, '/') == NULL)) {
- /* rc = connect_to_dfs_path(...) */
- cFYI(1, ("DFS root not supported"));
+ cERROR(1, ("Missing share name"));
rc = -ENODEV;
goto mount_fail_check;
} else {
}
}
if (rc)
- goto mount_fail_check;
+ goto remote_path_check;
tcon->seal = volume_info->seal;
write_lock(&cifs_tcp_ses_lock);
list_add(&tcon->tcon_list, &pSesInfo->tcon_list);
/* BB FIXME fix time_gran to be larger for LANMAN sessions */
sb->s_time_gran = 100;
-mount_fail_check:
- /* on error free sesinfo and tcon struct if needed */
- if (rc) {
- /* If find_unc succeeded then rc == 0 so we can not end */
- /* up accidently freeing someone elses tcon struct */
- if (tcon)
- cifs_put_tcon(tcon);
- else if (pSesInfo)
- cifs_put_smb_ses(pSesInfo);
- else
- cifs_put_tcp_session(srvTcp);
- goto out;
- }
+ if (rc)
+ goto remote_path_check;
+
cifs_sb->tcon = tcon;
/* do not care if following two calls succeed - informational */
cifs_sb->rsize = min(cifs_sb->rsize,
(tcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE));
- if (!rc && cifs_sb->prepathlen) {
+remote_path_check:
+ /* check if a whole path (including prepath) is not remote */
+ if (!rc && cifs_sb->prepathlen && tcon) {
/* build_path_to_root works only when we have a valid tcon */
full_path = cifs_build_path_to_root(cifs_sb);
if (full_path == NULL) {
goto mount_fail_check;
}
rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
- if (rc) {
- cERROR(1, ("Path %s in not accessible: %d",
- full_path, rc));
+ if (rc != -EREMOTE) {
kfree(full_path);
goto mount_fail_check;
}
kfree(full_path);
}
- /* volume_info->password is freed above when existing session found
- (in which case it is not needed anymore) but when new sesion is created
- the password ptr is put in the new session structure (in which case the
- password will be freed at unmount time) */
-out:
- /* zero out password before freeing */
- if (volume_info) {
- if (volume_info->password != NULL) {
- memset(volume_info->password, 0,
- strlen(volume_info->password));
- kfree(volume_info->password);
- }
- kfree(volume_info->UNC);
- kfree(volume_info->prepath);
- kfree(volume_info);
- }
- FreeXid(xid);
- return rc;
-}
-
-static int
-CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
- char session_key[CIFS_SESS_KEY_SIZE],
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *user;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- __u32 capabilities;
- __u16 count;
-
- cFYI(1, ("In sesssetup"));
- if (ses == NULL)
- return -EINVAL;
- user = ses->userName;
- domain = ses->domainName;
- smb_buffer = cifs_buf_get();
-
- if (smb_buffer == NULL)
- return -ENOMEM;
-
- smb_buffer_response = smb_buffer;
- pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 13 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req_no_secext.AndXCommand = 0xFF;
- pSMB->req_no_secext.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req_no_secext.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- if (ses->server->secMode &
- (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_LARGE_WRITE_X | CAP_LARGE_READ_X;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
-
- pSMB->req_no_secext.CaseInsensitivePasswordLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
-
- pSMB->req_no_secext.CaseSensitivePasswordLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- bcc_ptr = pByteArea(smb_buffer);
- memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
- memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
-
- if (ses->capabilities & CAP_UNICODE) {
- if ((long) bcc_ptr % 2) { /* must be word aligned for Unicode */
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- if (user == NULL)
- bytes_returned = 0; /* skip null user */
- else
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, user, 100,
- nls_codepage);
- /* convert number of 16 bit words to bytes */
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* trailing null */
- if (domain == NULL)
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr,
- "CIFS_LINUX_DOM", 32, nls_codepage);
- else
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release,
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- } else {
- if (user != NULL) {
- strncpy(bcc_ptr, user, 200);
- bcc_ptr += strnlen(user, 200);
- }
- *bcc_ptr = 0;
- bcc_ptr++;
- if (domain == NULL) {
- strcpy(bcc_ptr, "CIFS_LINUX_DOM");
- bcc_ptr += strlen("CIFS_LINUX_DOM") + 1;
- } else {
- strncpy(bcc_ptr, domain, 64);
- bcc_ptr += strnlen(domain, 64);
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- }
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req_no_secext.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); now done in SendReceive */
- } else if ((smb_buffer_response->WordCount == 3)
- || (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login")); /* BB mark SesInfo struct? */
- ses->Suid = smb_buffer_response->Uid; /* UID left in wire format
- (little endian) */
- cFYI(1, ("UID = %d ", ses->Suid));
- /* response can have either 3 or 4 word count - Samba sends 3 */
- bcc_ptr = pByteArea(smb_buffer_response);
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len < pSMBr->resp.ByteCount))) {
- if (pSMBr->resp.hdr.WordCount == 4)
- bcc_ptr += blob_len;
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response) - 1) / 2;
- /* Unicode strings must be word
- aligned */
- bcc_ptr++;
- } else {
- remaining_words =
- BCC(smb_buffer_response) / 2;
- }
- len =
- UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(2 * (len + 1),
- GFP_KERNEL);
- if (ses->serverOS == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)bcc_ptr,
- remaining_words-1);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(2 * (len + 1),
- GFP_KERNEL);
- if (ses->serverNOS == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverNOS,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1 + (2 * len)] = 0;
- if (strncmp(ses->serverNOS,
- "NT LAN Manager 4", 16) == 0) {
- cFYI(1, ("NT4 server"));
- ses->flags |= CIFS_SES_NT4;
- }
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string is not always null terminated
- (for e.g. for Windows XP & 2000) */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2*(len+1),
- GFP_KERNEL);
- if (ses->serverDomain == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverDomain,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverDomain[2*len] = 0;
- ses->serverDomain[1+(2*len)] = 0;
- } else { /* else no more room so create
- dummy domain string */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* no room so create dummy domain
- and NOS string */
-
- /* if these kcallocs fail not much we
- can do, but better to not fail the
- sesssetup itself */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) - (long)
- pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverOS == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverOS, bcc_ptr, len);
-
- bcc_ptr += len;
- /* null terminate the string */
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverNOS == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverNOS, bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverDomain == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverDomain, bcc_ptr,
- len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1,
- ("Variable field of length %d "
- "extends beyond end of smb ",
- len));
- }
- } else {
- cERROR(1, ("Security Blob Length extends beyond "
- "end of SMB"));
+ /* get referral if needed */
+ if (rc == -EREMOTE) {
+#ifdef CONFIG_CIFS_DFS_UPCALL
+ if (referral_walks_count > MAX_NESTED_LINKS) {
+ /*
+ * BB: when we implement proper loop detection,
+ * we will remove this check. But now we need it
+ * to prevent an indefinite loop if 'DFS tree' is
+ * misconfigured (i.e. has loops).
+ */
+ rc = -ELOOP;
+ goto mount_fail_check;
}
- } else {
- cERROR(1, ("Invalid Word count %d: ",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-sesssetup_nomem: /* do not return an error on nomem for the info strings,
- since that could make reconnection harder, and
- reconnection might be needed to free memory */
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-
-static int
-CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
- struct cifsSesInfo *ses, bool *pNTLMv2_flag,
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- int SecurityBlobLength = sizeof(NEGOTIATE_MESSAGE);
- PNEGOTIATE_MESSAGE SecurityBlob;
- PCHALLENGE_MESSAGE SecurityBlob2;
- __u32 negotiate_flags, capabilities;
- __u16 count;
-
- cFYI(1, ("In NTLMSSP sesssetup (negotiate)"));
- if (ses == NULL)
- return -EINVAL;
- domain = ses->domainName;
- *pNTLMv2_flag = false;
- smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
- return -ENOMEM;
- }
- smb_buffer_response = smb_buffer;
- pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
- pSMBr = (SESSION_SETUP_ANDX *) smb_buffer_response;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 12 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
- pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-
- pSMB->req.AndXCommand = 0xFF;
- pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_EXTENDED_SECURITY;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
- bcc_ptr = (char *) &pSMB->req.SecurityBlob;
- SecurityBlob = (PNEGOTIATE_MESSAGE) bcc_ptr;
- strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
- SecurityBlob->MessageType = NtLmNegotiate;
- negotiate_flags =
- NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_OEM |
- NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_NTLM |
- NTLMSSP_NEGOTIATE_56 |
- /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
- if (sign_CIFS_PDUs)
- negotiate_flags |= NTLMSSP_NEGOTIATE_SIGN;
-/* if (ntlmv2_support)
- negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;*/
- /* setup pointers to domain name and workstation name */
- bcc_ptr += SecurityBlobLength;
-
- SecurityBlob->WorkstationName.Buffer = 0;
- SecurityBlob->WorkstationName.Length = 0;
- SecurityBlob->WorkstationName.MaximumLength = 0;
-
- /* Domain not sent on first Sesssetup in NTLMSSP, instead it is sent
- along with username on auth request (ie the response to challenge) */
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- if (ses->capabilities & CAP_UNICODE) {
- if ((long) bcc_ptr % 2) {
- *bcc_ptr = 0;
- bcc_ptr++;
+ /* convert forward to back slashes in prepath here if needed */
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
+ convert_delimiter(cifs_sb->prepath,
+ CIFS_DIR_SEP(cifs_sb));
+ full_path = build_unc_path_to_root(volume_info, cifs_sb);
+ if (IS_ERR(full_path)) {
+ rc = PTR_ERR(full_path);
+ goto mount_fail_check;
}
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* null terminate Linux version */
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null terminate network opsys string */
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null domain */
- } else { /* ASCII */
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- bcc_ptr++; /* empty domain field */
- *bcc_ptr = 0;
- }
- SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
- pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
-
- if (smb_buffer_response->Status.CifsError ==
- cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))
- rc = 0;
-
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); *//* done in SendReceive now */
- } else if ((smb_buffer_response->WordCount == 3)
- || (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login"));
- /* Do we want to set anything in SesInfo struct when guest login? */
-
- bcc_ptr = pByteArea(smb_buffer_response);
- /* response can have either 3 or 4 word count - Samba sends 3 */
-
- SecurityBlob2 = (PCHALLENGE_MESSAGE) bcc_ptr;
- if (SecurityBlob2->MessageType != NtLmChallenge) {
- cFYI(1, ("Unexpected NTLMSSP message type received %d",
- SecurityBlob2->MessageType));
- } else if (ses) {
- ses->Suid = smb_buffer_response->Uid; /* UID left in le format */
- cFYI(1, ("UID = %d", ses->Suid));
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len <
- pSMBr->resp.ByteCount))) {
-
- if (pSMBr->resp.hdr.WordCount == 4) {
- bcc_ptr += blob_len;
- cFYI(1, ("Security Blob Length %d",
- blob_len));
- }
-
- cFYI(1, ("NTLMSSP Challenge rcvd"));
-
- memcpy(ses->server->cryptKey,
- SecurityBlob2->Challenge,
- CIFS_CRYPTO_KEY_SIZE);
- if (SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
- *pNTLMv2_flag = true;
-
- if ((SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_ALWAYS_SIGN))
- || (sign_CIFS_PDUs > 1))
- ses->server->secMode |=
- SECMODE_SIGN_REQUIRED;
- if ((SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_SIGN)) && (sign_CIFS_PDUs))
- ses->server->secMode |=
- SECMODE_SIGN_ENABLED;
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response)
- - 1) / 2;
- /* Must word align unicode strings */
- bcc_ptr++;
- } else {
- remaining_words =
- BCC
- (smb_buffer_response) / 2;
- }
- len =
- UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(2 * (len + 1), GFP_KERNEL);
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)
- bcc_ptr,
- remaining_words
- - 1);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2 * (len + 1),
- GFP_KERNEL);
- cifs_strfromUCS_le(ses->
- serverNOS,
- (__le16 *)
- bcc_ptr,
- len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1 +
- (2 * len)] = 0;
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string not always null terminated
- (for e.g. for Windows XP & 2000) */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2 *
- (len +
- 1),
- GFP_KERNEL);
- cifs_strfromUCS_le
- (ses->serverDomain,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr +=
- 2 * (len + 1);
- ses->serverDomain[2*len]
- = 0;
- ses->serverDomain
- [1 + (2 * len)]
- = 0;
- } /* else no more room so create dummy domain string */
- else {
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2,
- GFP_KERNEL);
- }
- } else { /* no room so create dummy domain and NOS string */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) - (long)
- pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverOS,
- bcc_ptr, len);
-
- bcc_ptr += len;
- bcc_ptr[0] = 0; /* null terminate string */
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverNOS, bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverDomain,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1,
- ("field of length %d "
- "extends beyond end of smb",
- len));
- }
- } else {
- cERROR(1, ("Security Blob Length extends beyond"
- " end of SMB"));
- }
- } else {
- cERROR(1, ("No session structure passed in."));
+ cFYI(1, ("Getting referral for: %s", full_path));
+ rc = get_dfs_path(xid, pSesInfo , full_path + 1,
+ cifs_sb->local_nls, &num_referrals, &referrals,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (!rc && num_referrals > 0) {
+ char *fake_devname = NULL;
+
+ if (mount_data != mount_data_global)
+ kfree(mount_data);
+ mount_data = cifs_compose_mount_options(
+ cifs_sb->mountdata, full_path + 1,
+ referrals, &fake_devname);
+ kfree(fake_devname);
+ free_dfs_info_array(referrals, num_referrals);
+
+ if (tcon)
+ cifs_put_tcon(tcon);
+ else if (pSesInfo)
+ cifs_put_smb_ses(pSesInfo);
+
+ cleanup_volume_info(&volume_info);
+ FreeXid(xid);
+ kfree(full_path);
+ referral_walks_count++;
+ goto try_mount_again;
}
- } else {
- cERROR(1, ("Invalid Word count %d:",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-static int
-CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
- char *ntlm_session_key, bool ntlmv2_flag,
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *user;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- int SecurityBlobLength = sizeof(AUTHENTICATE_MESSAGE);
- PAUTHENTICATE_MESSAGE SecurityBlob;
- __u32 negotiate_flags, capabilities;
- __u16 count;
-
- cFYI(1, ("In NTLMSSPSessSetup (Authenticate)"));
- if (ses == NULL)
- return -EINVAL;
- user = ses->userName;
- domain = ses->domainName;
- smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
- return -ENOMEM;
- }
- smb_buffer_response = smb_buffer;
- pSMB = (SESSION_SETUP_ANDX *)smb_buffer;
- pSMBr = (SESSION_SETUP_ANDX *)smb_buffer_response;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 12 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
- pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
- pSMB->req.AndXCommand = 0xFF;
- pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- pSMB->req.hdr.Uid = ses->Suid;
-
- if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_EXTENDED_SECURITY;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
+#else /* No DFS support, return error on mount */
+ rc = -EOPNOTSUPP;
+#endif
}
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
- bcc_ptr = (char *)&pSMB->req.SecurityBlob;
- SecurityBlob = (PAUTHENTICATE_MESSAGE)bcc_ptr;
- strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
- SecurityBlob->MessageType = NtLmAuthenticate;
- bcc_ptr += SecurityBlobLength;
- negotiate_flags = NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_REQUEST_TARGET |
- NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_TARGET_INFO |
- 0x80000000 | NTLMSSP_NEGOTIATE_128;
- if (sign_CIFS_PDUs)
- negotiate_flags |= /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN |*/ NTLMSSP_NEGOTIATE_SIGN;
- if (ntlmv2_flag)
- negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;
-
-/* setup pointers to domain name and workstation name */
-
- SecurityBlob->WorkstationName.Buffer = 0;
- SecurityBlob->WorkstationName.Length = 0;
- SecurityBlob->WorkstationName.MaximumLength = 0;
- SecurityBlob->SessionKey.Length = 0;
- SecurityBlob->SessionKey.MaximumLength = 0;
- SecurityBlob->SessionKey.Buffer = 0;
-
- SecurityBlob->LmChallengeResponse.Length = 0;
- SecurityBlob->LmChallengeResponse.MaximumLength = 0;
- SecurityBlob->LmChallengeResponse.Buffer = 0;
-
- SecurityBlob->NtChallengeResponse.Length =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- SecurityBlob->NtChallengeResponse.MaximumLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- memcpy(bcc_ptr, ntlm_session_key, CIFS_SESS_KEY_SIZE);
- SecurityBlob->NtChallengeResponse.Buffer =
- cpu_to_le32(SecurityBlobLength);
- SecurityBlobLength += CIFS_SESS_KEY_SIZE;
- bcc_ptr += CIFS_SESS_KEY_SIZE;
- if (ses->capabilities & CAP_UNICODE) {
- if (domain == NULL) {
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- } else {
- __u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
- nls_codepage);
- ln *= 2;
- SecurityBlob->DomainName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->DomainName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->DomainName.Length = cpu_to_le16(ln);
- }
- if (user == NULL) {
- SecurityBlob->UserName.Buffer = 0;
- SecurityBlob->UserName.Length = 0;
- SecurityBlob->UserName.MaximumLength = 0;
- } else {
- __u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, user, 64,
- nls_codepage);
- ln *= 2;
- SecurityBlob->UserName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->UserName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->UserName.Length = cpu_to_le16(ln);
- }
-
- /* SecurityBlob->WorkstationName.Length =
- cifs_strtoUCS((__le16 *) bcc_ptr, "AMACHINE",64, nls_codepage);
- SecurityBlob->WorkstationName.Length *= 2;
- SecurityBlob->WorkstationName.MaximumLength =
- cpu_to_le16(SecurityBlob->WorkstationName.Length);
- SecurityBlob->WorkstationName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += SecurityBlob->WorkstationName.Length;
- SecurityBlobLength += SecurityBlob->WorkstationName.Length;
- SecurityBlob->WorkstationName.Length =
- cpu_to_le16(SecurityBlob->WorkstationName.Length); */
-
- if ((long) bcc_ptr % 2) {
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* null term version string */
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null terminate network opsys string */
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null domain */
- } else { /* ASCII */
- if (domain == NULL) {
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- } else {
- __u16 ln;
- negotiate_flags |= NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED;
- strncpy(bcc_ptr, domain, 63);
- ln = strnlen(domain, 64);
- SecurityBlob->DomainName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->DomainName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->DomainName.Length = cpu_to_le16(ln);
- }
- if (user == NULL) {
- SecurityBlob->UserName.Buffer = 0;
- SecurityBlob->UserName.Length = 0;
- SecurityBlob->UserName.MaximumLength = 0;
- } else {
- __u16 ln;
- strncpy(bcc_ptr, user, 63);
- ln = strnlen(user, 64);
- SecurityBlob->UserName.MaximumLength = cpu_to_le16(ln);
- SecurityBlob->UserName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->UserName.Length = cpu_to_le16(ln);
- }
- /* BB fill in our workstation name if known BB */
-
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- bcc_ptr++; /* null domain */
- *bcc_ptr = 0;
- }
- SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
- pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
+mount_fail_check:
+ /* on error free sesinfo and tcon struct if needed */
if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response) done in SendReceive now */
- } else if ((smb_buffer_response->WordCount == 3) ||
- (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login")); /* BB Should we set anything
- in SesInfo struct ? */
-/* if (SecurityBlob2->MessageType != NtLm??) {
- cFYI("Unexpected message type on auth response is %d"));
- } */
-
- if (ses) {
- cFYI(1,
- ("Check challenge UID %d vs auth response UID %d",
- ses->Suid, smb_buffer_response->Uid));
- /* UID left in wire format */
- ses->Suid = smb_buffer_response->Uid;
- bcc_ptr = pByteArea(smb_buffer_response);
- /* response can have either 3 or 4 word count - Samba sends 3 */
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len <
- pSMBr->resp.ByteCount))) {
- if (pSMBr->resp.hdr.WordCount == 4) {
- bcc_ptr +=
- blob_len;
- cFYI(1,
- ("Security Blob Length %d ",
- blob_len));
- }
-
- cFYI(1,
- ("NTLMSSP response to Authenticate "));
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response)
- - 1) / 2;
- bcc_ptr++; /* Unicode strings must be word aligned */
- } else {
- remaining_words = BCC(smb_buffer_response) / 2;
- }
- len = UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(2 * (len + 1), GFP_KERNEL);
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)
- bcc_ptr,
- remaining_words
- - 1);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2 * (len + 1),
- GFP_KERNEL);
- cifs_strfromUCS_le(ses->
- serverNOS,
- (__le16 *)
- bcc_ptr,
- len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1+(2*len)] = 0;
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string not always null terminated (e.g. for Windows XP & 2000) */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2 *
- (len +
- 1),
- GFP_KERNEL);
- cifs_strfromUCS_le
- (ses->
- serverDomain,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr +=
- 2 * (len + 1);
- ses->
- serverDomain[2
- * len]
- = 0;
- ses->
- serverDomain[1
- +
- (2
- *
- len)]
- = 0;
- } /* else no more room so create dummy domain string */
- else {
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2,GFP_KERNEL);
- }
- } else { /* no room so create dummy domain and NOS string */
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) -
- (long) pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- if (ses->serverOS)
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
- strncpy(ses->serverOS,bcc_ptr, len);
-
- bcc_ptr += len;
- bcc_ptr[0] = 0; /* null terminate the string */
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(len+1,
- GFP_KERNEL);
- strncpy(ses->serverNOS,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- if (ses->serverDomain)
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(len+1,
- GFP_KERNEL);
- strncpy(ses->serverDomain,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1, ("field of length %d "
- "extends beyond end of smb ",
- len));
- }
- } else {
- cERROR(1, ("Security Blob extends beyond end "
- "of SMB"));
- }
- } else {
- cERROR(1, ("No session structure passed in."));
- }
- } else {
- cERROR(1, ("Invalid Word count %d: ",
- smb_buffer_response->WordCount));
- rc = -EIO;
+ if (mount_data != mount_data_global)
+ kfree(mount_data);
+ /* If find_unc succeeded then rc == 0 so we can not end */
+ /* up accidently freeing someone elses tcon struct */
+ if (tcon)
+ cifs_put_tcon(tcon);
+ else if (pSesInfo)
+ cifs_put_smb_ses(pSesInfo);
+ else
+ cifs_put_tcp_session(srvTcp);
+ goto out;
}
- cifs_buf_release(smb_buffer);
-
+ /* volume_info->password is freed above when existing session found
+ (in which case it is not needed anymore) but when new sesion is created
+ the password ptr is put in the new session structure (in which case the
+ password will be freed at unmount time) */
+out:
+ /* zero out password before freeing */
+ cleanup_volume_info(&volume_info);
+ FreeXid(xid);
return rc;
}
TCONX_RSP *pSMBr;
unsigned char *bcc_ptr;
int rc = 0;
- int length;
+ int length, bytes_left;
__u16 count;
if (ses == NULL)
rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length,
CIFS_STD_OP);
- /* if (rc) rc = map_smb_to_linux_error(smb_buffer_response); */
/* above now done in SendReceive */
if ((rc == 0) && (tcon != NULL)) {
+ bool is_unicode;
+
tcon->tidStatus = CifsGood;
tcon->need_reconnect = false;
tcon->tid = smb_buffer_response->Tid;
bcc_ptr = pByteArea(smb_buffer_response);
- length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2);
+ bytes_left = BCC(smb_buffer_response);
+ length = strnlen(bcc_ptr, bytes_left - 2);
+ if (smb_buffer->Flags2 & SMBFLG2_UNICODE)
+ is_unicode = true;
+ else
+ is_unicode = false;
+
+
/* skip service field (NB: this field is always ASCII) */
if (length == 3) {
if ((bcc_ptr[0] == 'I') && (bcc_ptr[1] == 'P') &&
}
}
bcc_ptr += length + 1;
+ bytes_left -= (length + 1);
strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- length = UniStrnlen((wchar_t *) bcc_ptr, 512);
- if ((bcc_ptr + (2 * length)) -
- pByteArea(smb_buffer_response) <=
- BCC(smb_buffer_response)) {
- kfree(tcon->nativeFileSystem);
- tcon->nativeFileSystem =
- kzalloc(2*(length + 1), GFP_KERNEL);
- if (tcon->nativeFileSystem)
- cifs_strfromUCS_le(
- tcon->nativeFileSystem,
- (__le16 *) bcc_ptr,
- length, nls_codepage);
- bcc_ptr += 2 * length;
- bcc_ptr[0] = 0; /* null terminate the string */
- bcc_ptr[1] = 0;
- bcc_ptr += 2;
- }
- /* else do not bother copying these information fields*/
- } else {
- length = strnlen(bcc_ptr, 1024);
- if ((bcc_ptr + length) -
- pByteArea(smb_buffer_response) <=
- BCC(smb_buffer_response)) {
- kfree(tcon->nativeFileSystem);
- tcon->nativeFileSystem =
- kzalloc(length + 1, GFP_KERNEL);
- if (tcon->nativeFileSystem)
- strncpy(tcon->nativeFileSystem, bcc_ptr,
- length);
- }
- /* else do not bother copying these information fields*/
- }
+
+ /* mostly informational -- no need to fail on error here */
+ tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
+ bytes_left, is_unicode,
+ nls_codepage);
+
+ cFYI(1, ("nativeFileSystem=%s", tcon->nativeFileSystem));
+
if ((smb_buffer_response->WordCount == 3) ||
(smb_buffer_response->WordCount == 7))
/* field is in same location */
struct nls_table *nls_info)
{
int rc = 0;
- char ntlm_session_key[CIFS_SESS_KEY_SIZE];
- bool ntlmv2_flag = false;
int first_time = 0;
struct TCP_Server_Info *server = pSesInfo->server;
pSesInfo->capabilities = server->capabilities;
if (linuxExtEnabled == 0)
pSesInfo->capabilities &= (~CAP_UNIX);
- /* pSesInfo->sequence_number = 0;*/
+
cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
server->secMode, server->capabilities, server->timeAdj));
- if (experimEnabled < 2)
- rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
- else if (extended_security
- && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
- && (server->secType == NTLMSSP)) {
- rc = -EOPNOTSUPP;
- } else if (extended_security
- && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
- && (server->secType == RawNTLMSSP)) {
- cFYI(1, ("NTLMSSP sesssetup"));
- rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag,
- nls_info);
- if (!rc) {
- if (ntlmv2_flag) {
- char *v2_response;
- cFYI(1, ("more secure NTLM ver2 hash"));
- if (CalcNTLMv2_partial_mac_key(pSesInfo,
- nls_info)) {
- rc = -ENOMEM;
- goto ss_err_exit;
- } else
- v2_response = kmalloc(16 + 64 /* blob*/,
- GFP_KERNEL);
- if (v2_response) {
- CalcNTLMv2_response(pSesInfo,
- v2_response);
- /* if (first_time)
- cifs_calculate_ntlmv2_mac_key */
- kfree(v2_response);
- /* BB Put dummy sig in SessSetup PDU? */
- } else {
- rc = -ENOMEM;
- goto ss_err_exit;
- }
-
- } else {
- SMBNTencrypt(pSesInfo->password,
- server->cryptKey,
- ntlm_session_key);
-
- if (first_time)
- cifs_calculate_mac_key(
- &server->mac_signing_key,
- ntlm_session_key,
- pSesInfo->password);
- }
- /* for better security the weaker lanman hash not sent
- in AuthSessSetup so we no longer calculate it */
-
- rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo,
- ntlm_session_key,
- ntlmv2_flag,
- nls_info);
- }
- } else { /* old style NTLM 0.12 session setup */
- SMBNTencrypt(pSesInfo->password, server->cryptKey,
- ntlm_session_key);
-
- if (first_time)
- cifs_calculate_mac_key(&server->mac_signing_key,
- ntlm_session_key,
- pSesInfo->password);
-
- rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info);
- }
+ rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
if (rc) {
cERROR(1, ("Send error in SessSetup = %d", rc));
} else {
cFYI(1, ("CIFS Session Established successfully"));
- spin_lock(&GlobalMid_Lock);
- pSesInfo->status = CifsGood;
- pSesInfo->need_reconnect = false;
- spin_unlock(&GlobalMid_Lock);
+ spin_lock(&GlobalMid_Lock);
+ pSesInfo->status = CifsGood;
+ pSesInfo->need_reconnect = false;
+ spin_unlock(&GlobalMid_Lock);
}
ss_err_exit:
return full_path;
}
+static void
+cifs_fill_fileinfo(struct inode *newinode, __u16 fileHandle,
+ struct cifsTconInfo *tcon, bool write_only)
+{
+ int oplock = 0;
+ struct cifsFileInfo *pCifsFile;
+ struct cifsInodeInfo *pCifsInode;
+
+ pCifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+
+ if (pCifsFile == NULL)
+ return;
+
+ if (oplockEnabled)
+ oplock = REQ_OPLOCK;
+
+ pCifsFile->netfid = fileHandle;
+ pCifsFile->pid = current->tgid;
+ pCifsFile->pInode = newinode;
+ pCifsFile->invalidHandle = false;
+ pCifsFile->closePend = false;
+ mutex_init(&pCifsFile->fh_mutex);
+ mutex_init(&pCifsFile->lock_mutex);
+ INIT_LIST_HEAD(&pCifsFile->llist);
+ atomic_set(&pCifsFile->wrtPending, 0);
+
+ /* set the following in open now
+ pCifsFile->pfile = file; */
+ write_lock(&GlobalSMBSeslock);
+ list_add(&pCifsFile->tlist, &tcon->openFileList);
+ pCifsInode = CIFS_I(newinode);
+ if (pCifsInode) {
+ /* if readable file instance put first in list*/
+ if (write_only)
+ list_add_tail(&pCifsFile->flist,
+ &pCifsInode->openFileList);
+ else
+ list_add(&pCifsFile->flist, &pCifsInode->openFileList);
+
+ if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
+ pCifsInode->clientCanCacheAll = true;
+ pCifsInode->clientCanCacheRead = true;
+ cFYI(1, ("Exclusive Oplock inode %p", newinode));
+ } else if ((oplock & 0xF) == OPLOCK_READ)
+ pCifsInode->clientCanCacheRead = true;
+ }
+ write_unlock(&GlobalSMBSeslock);
+}
+
int cifs_posix_open(char *full_path, struct inode **pinode,
struct super_block *sb, int mode, int oflags,
int *poplock, __u16 *pnetfid, int xid)
{
int rc;
__u32 oplock;
+ bool write_only = false;
FILE_UNIX_BASIC_INFO *presp_data;
__u32 posix_flags = 0;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
if (oflags & O_DIRECT)
posix_flags |= SMB_O_DIRECT;
+ if (!(oflags & FMODE_READ))
+ write_only = true;
rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
pnetfid, presp_data, &oplock, full_path,
if (!pinode)
goto posix_open_ret; /* caller does not need info */
- if (*pinode == NULL)
- *pinode = cifs_new_inode(sb, &presp_data->UniqueId);
+ if (*pinode == NULL) {
+ __u64 unique_id = le64_to_cpu(presp_data->UniqueId);
+ *pinode = cifs_new_inode(sb, &unique_id);
+ }
/* else an inode was passed in. Update its info, don't create one */
/* We do not need to close the file if new_inode fails since
posix_fill_in_inode(*pinode, presp_data, 1);
+ cifs_fill_fileinfo(*pinode, *pnetfid, cifs_sb->tcon, write_only);
+
posix_open_ret:
kfree(presp_data);
return rc;
int create_options = CREATE_NOT_DIR;
int oplock = 0;
int oflags;
+ bool posix_create = false;
/*
* BB below access is probably too much for mknod to request
* but we have to do query and setpathinfo so requesting
char *full_path = NULL;
FILE_ALL_INFO *buf = NULL;
struct inode *newinode = NULL;
- struct cifsInodeInfo *pCifsInode;
int disposition = FILE_OVERWRITE_IF;
bool write_only = false;
negotation. EREMOTE indicates DFS junction, which is not
handled in posix open */
- if ((rc == 0) && (newinode == NULL))
- goto cifs_create_get_file_info; /* query inode info */
- else if (rc == 0) /* success, no need to query */
- goto cifs_create_set_dentry;
- else if ((rc != -EIO) && (rc != -EREMOTE) &&
+ if (rc == 0) {
+ posix_create = true;
+ if (newinode == NULL) /* query inode info */
+ goto cifs_create_get_file_info;
+ else /* success, no need to query */
+ goto cifs_create_set_dentry;
+ } else if ((rc != -EIO) && (rc != -EREMOTE) &&
(rc != -EOPNOTSUPP)) /* path not found or net err */
goto cifs_create_out;
/* else fallthrough to retry, using older open call, this is
if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
/* mknod case - do not leave file open */
CIFSSMBClose(xid, tcon, fileHandle);
- } else if (newinode) {
- struct cifsFileInfo *pCifsFile =
- kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
-
- if (pCifsFile == NULL)
- goto cifs_create_out;
- pCifsFile->netfid = fileHandle;
- pCifsFile->pid = current->tgid;
- pCifsFile->pInode = newinode;
- pCifsFile->invalidHandle = false;
- pCifsFile->closePend = false;
- init_MUTEX(&pCifsFile->fh_sem);
- mutex_init(&pCifsFile->lock_mutex);
- INIT_LIST_HEAD(&pCifsFile->llist);
- atomic_set(&pCifsFile->wrtPending, 0);
-
- /* set the following in open now
- pCifsFile->pfile = file; */
- write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &tcon->openFileList);
- pCifsInode = CIFS_I(newinode);
- if (pCifsInode) {
- /* if readable file instance put first in list*/
- if (write_only) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
- if ((oplock & 0xF) == OPLOCK_EXCLUSIVE) {
- pCifsInode->clientCanCacheAll = true;
- pCifsInode->clientCanCacheRead = true;
- cFYI(1, ("Exclusive Oplock inode %p",
- newinode));
- } else if ((oplock & 0xF) == OPLOCK_READ)
- pCifsInode->clientCanCacheRead = true;
- }
- write_unlock(&GlobalSMBSeslock);
+ } else if (!(posix_create) && (newinode)) {
+ cifs_fill_fileinfo(newinode, fileHandle,
+ cifs_sb->tcon, write_only);
}
cifs_create_out:
kfree(buf);
return rc;
}
-
struct dentry *
cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
struct nameidata *nd)
{
int xid;
int rc = 0; /* to get around spurious gcc warning, set to zero here */
+ int oplock = 0;
+ int mode;
+ __u16 fileHandle = 0;
+ bool posix_open = false;
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
struct inode *newInode = NULL;
char *full_path = NULL;
+ struct file *filp;
xid = GetXid();
}
cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode));
- if (pTcon->unix_ext)
- rc = cifs_get_inode_info_unix(&newInode, full_path,
- parent_dir_inode->i_sb, xid);
- else
+ if (pTcon->unix_ext) {
+ if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
+ (nd->flags & LOOKUP_OPEN)) {
+ if (!((nd->intent.open.flags & O_CREAT) &&
+ (nd->intent.open.flags & O_EXCL))) {
+ mode = nd->intent.open.create_mode &
+ ~current_umask();
+ rc = cifs_posix_open(full_path, &newInode,
+ parent_dir_inode->i_sb, mode,
+ nd->intent.open.flags, &oplock,
+ &fileHandle, xid);
+ /*
+ * This code works around a bug in
+ * samba posix open in samba versions 3.3.1
+ * and earlier where create works
+ * but open fails with invalid parameter.
+ * If either of these error codes are
+ * returned, follow the normal lookup.
+ * Otherwise, the error during posix open
+ * is handled.
+ */
+ if ((rc != -EINVAL) && (rc != -EOPNOTSUPP))
+ posix_open = true;
+ }
+ }
+ if (!posix_open)
+ rc = cifs_get_inode_info_unix(&newInode, full_path,
+ parent_dir_inode->i_sb, xid);
+ } else
rc = cifs_get_inode_info(&newInode, full_path, NULL,
- parent_dir_inode->i_sb, xid, NULL);
+ parent_dir_inode->i_sb, xid, NULL);
if ((rc == 0) && (newInode != NULL)) {
if (pTcon->nocase)
else
direntry->d_op = &cifs_dentry_ops;
d_add(direntry, newInode);
-
+ if (posix_open)
+ filp = lookup_instantiate_filp(nd, direntry, NULL);
/* since paths are not looked up by component - the parent
directories are presumed to be good here */
renew_parental_timestamps(direntry);
}
key->type_data.x[0] = datalen;
- rcu_assign_pointer(key->payload.data, ip);
+ key->payload.data = ip;
return rc;
}
memset(private_data, 0, sizeof(struct cifsFileInfo));
private_data->netfid = netfid;
private_data->pid = current->tgid;
- init_MUTEX(&private_data->fh_sem);
+ mutex_init(&private_data->fh_mutex);
mutex_init(&private_data->lock_mutex);
INIT_LIST_HEAD(&private_data->llist);
private_data->pfile = file; /* needed for writepage */
struct file *file, struct cifsInodeInfo *pCifsInode,
struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
{
- struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
-/* struct timespec temp; */ /* BB REMOVEME BB */
file->private_data = kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
if (file->private_data == NULL)
return -ENOMEM;
pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
if (pCifsInode == NULL) {
return -EINVAL;
}
- /* want handles we can use to read with first
- in the list so we do not have to walk the
- list to search for one in write_begin */
- if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
-
if (pCifsInode->clientCanCacheRead) {
/* we have the inode open somewhere else
no need to discard cache data */
cifs_sb = CIFS_SB(inode->i_sb);
tcon = cifs_sb->tcon;
- if (file->f_flags & O_CREAT) {
- /* search inode for this file and fill in file->private_data */
- pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &pCifsInode->openFileList) {
- pCifsFile = list_entry(tmp, struct cifsFileInfo,
- flist);
- if ((pCifsFile->pfile == NULL) &&
- (pCifsFile->pid == current->tgid)) {
- /* mode set in cifs_create */
-
- /* needed for writepage */
- pCifsFile->pfile = file;
-
- file->private_data = pCifsFile;
- break;
- }
- }
- read_unlock(&GlobalSMBSeslock);
- if (file->private_data != NULL) {
- rc = 0;
- FreeXid(xid);
- return rc;
- } else {
- if (file->f_flags & O_EXCL)
- cERROR(1, ("could not find file instance for "
- "new file %p", file));
+ /* search inode for this file and fill in file->private_data */
+ pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
+ read_lock(&GlobalSMBSeslock);
+ list_for_each(tmp, &pCifsInode->openFileList) {
+ pCifsFile = list_entry(tmp, struct cifsFileInfo,
+ flist);
+ if ((pCifsFile->pfile == NULL) &&
+ (pCifsFile->pid == current->tgid)) {
+ /* mode set in cifs_create */
+
+ /* needed for writepage */
+ pCifsFile->pfile = file;
+
+ file->private_data = pCifsFile;
+ break;
}
}
+ read_unlock(&GlobalSMBSeslock);
+
+ if (file->private_data != NULL) {
+ rc = 0;
+ FreeXid(xid);
+ return rc;
+ } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
+ cERROR(1, ("could not find file instance for "
+ "new file %p", file));
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
return -EBADF;
xid = GetXid();
- down(&pCifsFile->fh_sem);
+ mutex_unlock(&pCifsFile->fh_mutex);
if (!pCifsFile->invalidHandle) {
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
FreeXid(xid);
return 0;
}
if (full_path == NULL) {
rc = -ENOMEM;
reopen_error_exit:
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
FreeXid(xid);
return rc;
}
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
if (rc) {
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
cFYI(1, ("cifs_open returned 0x%x", rc));
cFYI(1, ("oplock: %d", oplock));
} else {
reopen_success:
pCifsFile->netfid = netfid;
pCifsFile->invalidHandle = false;
- up(&pCifsFile->fh_sem);
+ mutex_lock(&pCifsFile->fh_mutex);
pCifsInode = CIFS_I(inode);
if (pCifsInode) {
if (can_flush) {
return rc;
}
+/*
+ * Set the timeout on write requests past EOF. For some servers (Windows)
+ * these calls can be very long.
+ *
+ * If we're writing >10M past the EOF we give a 180s timeout. Anything less
+ * than that gets a 45s timeout. Writes not past EOF get 15s timeouts.
+ * The 10M cutoff is totally arbitrary. A better scheme for this would be
+ * welcome if someone wants to suggest one.
+ *
+ * We may be able to do a better job with this if there were some way to
+ * declare that a file should be sparse.
+ */
+static int
+cifs_write_timeout(struct cifsInodeInfo *cifsi, loff_t offset)
+{
+ if (offset <= cifsi->server_eof)
+ return CIFS_STD_OP;
+ else if (offset > (cifsi->server_eof + (10 * 1024 * 1024)))
+ return CIFS_VLONG_OP;
+ else
+ return CIFS_LONG_OP;
+}
+
+/* update the file size (if needed) after a write */
+static void
+cifs_update_eof(struct cifsInodeInfo *cifsi, loff_t offset,
+ unsigned int bytes_written)
+{
+ loff_t end_of_write = offset + bytes_written;
+
+ if (end_of_write > cifsi->server_eof)
+ cifsi->server_eof = end_of_write;
+}
+
ssize_t cifs_user_write(struct file *file, const char __user *write_data,
size_t write_size, loff_t *poffset)
{
struct cifsTconInfo *pTcon;
int xid, long_op;
struct cifsFileInfo *open_file;
+ struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
xid = GetXid();
- if (*poffset > file->f_path.dentry->d_inode->i_size)
- long_op = CIFS_VLONG_OP; /* writes past EOF take long time */
- else
- long_op = CIFS_LONG_OP;
-
+ long_op = cifs_write_timeout(cifsi, *poffset);
for (total_written = 0; write_size > total_written;
total_written += bytes_written) {
rc = -EAGAIN;
FreeXid(xid);
return rc;
}
- } else
+ } else {
+ cifs_update_eof(cifsi, *poffset, bytes_written);
*poffset += bytes_written;
+ }
long_op = CIFS_STD_OP; /* subsequent writes fast -
15 seconds is plenty */
}
struct cifsTconInfo *pTcon;
int xid, long_op;
struct cifsFileInfo *open_file;
+ struct cifsInodeInfo *cifsi = CIFS_I(file->f_path.dentry->d_inode);
cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
xid = GetXid();
- if (*poffset > file->f_path.dentry->d_inode->i_size)
- long_op = CIFS_VLONG_OP; /* writes past EOF can be slow */
- else
- long_op = CIFS_LONG_OP;
-
+ long_op = cifs_write_timeout(cifsi, *poffset);
for (total_written = 0; write_size > total_written;
total_written += bytes_written) {
rc = -EAGAIN;
FreeXid(xid);
return rc;
}
- } else
+ } else {
+ cifs_update_eof(cifsi, *poffset, bytes_written);
*poffset += bytes_written;
+ }
long_op = CIFS_STD_OP; /* subsequent writes fast -
15 seconds is plenty */
}
int nr_pages;
__u64 offset = 0;
struct cifsFileInfo *open_file;
+ struct cifsInodeInfo *cifsi = CIFS_I(mapping->host);
struct page *page;
struct pagevec pvec;
int rc = 0;
int scanned = 0;
- int xid;
+ int xid, long_op;
cifs_sb = CIFS_SB(mapping->host->i_sb);
cERROR(1, ("No writable handles for inode"));
rc = -EBADF;
} else {
+ long_op = cifs_write_timeout(cifsi, offset);
rc = CIFSSMBWrite2(xid, cifs_sb->tcon,
open_file->netfid,
bytes_to_write, offset,
&bytes_written, iov, n_iov,
- CIFS_LONG_OP);
+ long_op);
atomic_dec(&open_file->wrtPending);
+ cifs_update_eof(cifsi, offset, bytes_written);
+
if (rc || bytes_written < bytes_to_write) {
cERROR(1, ("Write2 ret %d, wrote %d",
rc, bytes_written));
inode->i_nlink = le64_to_cpu(info->Nlinks);
+ cifsInfo->server_eof = end_of_file;
spin_lock(&inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/*
/* get new inode */
if (*pinode == NULL) {
- *pinode = cifs_new_inode(sb, &find_data.UniqueId);
+ __u64 unique_id = le64_to_cpu(find_data.UniqueId);
+ *pinode = cifs_new_inode(sb, &unique_id);
if (*pinode == NULL) {
rc = -ENOMEM;
goto cgiiu_exit;
inode->i_mode |= S_IFREG;
}
+ cifsInfo->server_eof = le64_to_cpu(pfindData->EndOfFile);
spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo,
- le64_to_cpu(pfindData->EndOfFile))) {
+ if (is_size_safe_to_change(cifsInfo, cifsInfo->server_eof)) {
/* can not safely shrink the file size here if the
client is writing to it due to potential races */
- i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
+ i_size_write(inode, cifsInfo->server_eof);
/* 512 bytes (2**9) is the fake blocksize that must be
used for this calculation */
goto out_close;
}
+
+/*
+ * If dentry->d_inode is null (usually meaning the cached dentry
+ * is a negative dentry) then we would attempt a standard SMB delete, but
+ * if that fails we can not attempt the fall back mechanisms on EACESS
+ * but will return the EACESS to the caller. Note that the VFS does not call
+ * unlink on negative dentries currently.
+ */
int cifs_unlink(struct inode *dir, struct dentry *dentry)
{
int rc = 0;
int xid;
char *full_path = NULL;
struct inode *inode = dentry->d_inode;
- struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+ struct cifsInodeInfo *cifs_inode;
struct super_block *sb = dir->i_sb;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
struct cifsTconInfo *tcon = cifs_sb->tcon;
rc = cifs_rename_pending_delete(full_path, dentry, xid);
if (rc == 0)
drop_nlink(inode);
- } else if (rc == -EACCES && dosattr == 0) {
+ } else if ((rc == -EACCES) && (dosattr == 0) && inode) {
attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
if (attrs == NULL) {
rc = -ENOMEM;
}
/* try to reset dos attributes */
- origattr = cifsInode->cifsAttrs;
+ cifs_inode = CIFS_I(inode);
+ origattr = cifs_inode->cifsAttrs;
if (origattr == 0)
origattr |= ATTR_NORMAL;
dosattr = origattr & ~ATTR_READONLY;
out_reval:
if (inode) {
- cifsInode = CIFS_I(inode);
- cifsInode->time = 0; /* will force revalidate to get info
+ cifs_inode = CIFS_I(inode);
+ cifs_inode->time = 0; /* will force revalidate to get info
when needed */
inode->i_ctime = current_fs_time(sb);
}
dir->i_ctime = dir->i_mtime = current_fs_time(sb);
- cifsInode = CIFS_I(dir);
+ cifs_inode = CIFS_I(dir);
CIFS_I(dir)->time = 0; /* force revalidate of dir as well */
kfree(full_path);
cFYI(1, ("posix mkdir returned 0x%x", rc));
d_drop(direntry);
} else {
+ __u64 unique_id;
if (pInfo->Type == cpu_to_le32(-1)) {
/* no return info, go query for it */
kfree(pInfo);
else
direntry->d_op = &cifs_dentry_ops;
- newinode = cifs_new_inode(inode->i_sb,
- &pInfo->UniqueId);
+ unique_id = le64_to_cpu(pInfo->UniqueId);
+ newinode = cifs_new_inode(inode->i_sb, &unique_id);
if (newinode == NULL) {
kfree(pInfo);
goto mkdir_get_info;
checking the UniqueId via FILE_INTERNAL_INFO */
unlink_target:
- if ((rc == -EACCES) || (rc == -EEXIST)) {
+ /* Try unlinking the target dentry if it's not negative */
+ if (target_dentry->d_inode && (rc == -EACCES || rc == -EEXIST)) {
tmprc = cifs_unlink(target_dir, target_dentry);
if (tmprc)
goto cifs_rename_exit;
}
if (rc == 0) {
+ cifsInode->server_eof = attrs->ia_size;
rc = cifs_vmtruncate(inode, attrs->ia_size);
cifs_truncate_page(inode->i_mapping, inode->i_size);
}
goto out;
}
- if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
- /*
- Flush data before changing file size or changing the last
- write time of the file on the server. If the
- flush returns error, store it to report later and continue.
- BB: This should be smarter. Why bother flushing pages that
- will be truncated anyway? Also, should we error out here if
- the flush returns error?
- */
- rc = filemap_write_and_wait(inode->i_mapping);
- if (rc != 0) {
- cifsInode->write_behind_rc = rc;
- rc = 0;
- }
+ /*
+ * Attempt to flush data before changing attributes. We need to do
+ * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+ * ownership or mode then we may also need to do this. Here, we take
+ * the safe way out and just do the flush on all setattr requests. If
+ * the flush returns error, store it to report later and continue.
+ *
+ * BB: This should be smarter. Why bother flushing pages that
+ * will be truncated anyway? Also, should we error out here if
+ * the flush returns error?
+ */
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc != 0) {
+ cifsInode->write_behind_rc = rc;
+ rc = 0;
}
if (attrs->ia_valid & ATTR_SIZE) {
return -ENOMEM;
}
- if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
- /*
- Flush data before changing file size or changing the last
- write time of the file on the server. If the
- flush returns error, store it to report later and continue.
- BB: This should be smarter. Why bother flushing pages that
- will be truncated anyway? Also, should we error out here if
- the flush returns error?
- */
- rc = filemap_write_and_wait(inode->i_mapping);
- if (rc != 0) {
- cifsInode->write_behind_rc = rc;
- rc = 0;
- }
+ /*
+ * Attempt to flush data before changing attributes. We need to do
+ * this for ATTR_SIZE and ATTR_MTIME for sure, and if we change the
+ * ownership or mode then we may also need to do this. Here, we take
+ * the safe way out and just do the flush on all setattr requests. If
+ * the flush returns error, store it to report later and continue.
+ *
+ * BB: This should be smarter. Why bother flushing pages that
+ * will be truncated anyway? Also, should we error out here if
+ * the flush returns error?
+ */
+ rc = filemap_write_and_wait(inode->i_mapping);
+ if (rc != 0) {
+ cifsInode->write_behind_rc = rc;
+ rc = 0;
}
if (attrs->ia_valid & ATTR_SIZE) {
full_path = build_path_from_dentry(direntry);
if (!full_path)
- goto out_no_free;
+ goto out;
cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
cifs_sb = CIFS_SB(inode->i_sb);
pTcon = cifs_sb->tcon;
- target_path = kmalloc(PATH_MAX, GFP_KERNEL);
- if (!target_path) {
- target_path = ERR_PTR(-ENOMEM);
- goto out;
- }
/* We could change this to:
if (pTcon->unix_ext)
if (pTcon->ses->capabilities & CAP_UNIX)
rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
- target_path,
- PATH_MAX-1,
+ &target_path,
cifs_sb->local_nls);
else {
/* BB add read reparse point symlink code here */
/* BB Add MAC style xsymlink check here if enabled */
}
- if (rc == 0) {
-
-/* BB Add special case check for Samba DFS symlinks */
-
- target_path[PATH_MAX-1] = 0;
- } else {
+ if (rc != 0) {
kfree(target_path);
target_path = ERR_PTR(rc);
}
-out:
kfree(full_path);
-out_no_free:
+out:
FreeXid(xid);
nd_set_link(nd, target_path);
- return NULL; /* No cookie */
+ return NULL;
}
int
return rc;
}
-int
-cifs_readlink(struct dentry *direntry, char __user *pBuffer, int buflen)
-{
- struct inode *inode = direntry->d_inode;
- int rc = -EACCES;
- int xid;
- int oplock = 0;
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
- char *full_path = NULL;
- char *tmpbuffer;
- int len;
- __u16 fid;
-
- xid = GetXid();
- cifs_sb = CIFS_SB(inode->i_sb);
- pTcon = cifs_sb->tcon;
-
-/* BB would it be safe against deadlock to grab this sem
- even though rename itself grabs the sem and calls lookup? */
-/* mutex_lock(&inode->i_sb->s_vfs_rename_mutex);*/
- full_path = build_path_from_dentry(direntry);
-/* mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);*/
-
- if (full_path == NULL) {
- FreeXid(xid);
- return -ENOMEM;
- }
-
- cFYI(1,
- ("Full path: %s inode = 0x%p pBuffer = 0x%p buflen = %d",
- full_path, inode, pBuffer, buflen));
- if (buflen > PATH_MAX)
- len = PATH_MAX;
- else
- len = buflen;
- tmpbuffer = kmalloc(len, GFP_KERNEL);
- if (tmpbuffer == NULL) {
- kfree(full_path);
- FreeXid(xid);
- return -ENOMEM;
- }
-
-/* BB add read reparse point symlink code and
- Unix extensions symlink code here BB */
-/* We could disable this based on pTcon->unix_ext flag instead ... but why? */
- if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
- rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
- tmpbuffer,
- len - 1,
- cifs_sb->local_nls);
- else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
- cERROR(1, ("SFU style symlinks not implemented yet"));
- /* add open and read as in fs/cifs/inode.c */
- } else {
- rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, GENERIC_READ,
- OPEN_REPARSE_POINT, &fid, &oplock, NULL,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (!rc) {
- rc = CIFSSMBQueryReparseLinkInfo(xid, pTcon, full_path,
- tmpbuffer,
- len - 1,
- fid,
- cifs_sb->local_nls);
- if (CIFSSMBClose(xid, pTcon, fid)) {
- cFYI(1, ("Error closing junction point "
- "(open for ioctl)"));
- }
- /* If it is a DFS junction earlier we would have gotten
- PATH_NOT_COVERED returned from server so we do
- not need to request the DFS info here */
- }
- }
- /* BB Anything else to do to handle recursive links? */
- /* BB Should we be using page ops here? */
-
- /* BB null terminate returned string in pBuffer? BB */
- if (rc == 0) {
- rc = vfs_readlink(direntry, pBuffer, len, tmpbuffer);
- cFYI(1,
- ("vfs_readlink called from cifs_readlink returned %d",
- rc));
- }
-
- kfree(tmpbuffer);
- kfree(full_path);
- FreeXid(xid);
- return rc;
-}
-
void cifs_put_link(struct dentry *direntry, struct nameidata *nd, void *cookie)
{
char *p = nd_get_link(nd);
return;
}
-/* Windows maps these to the user defined 16 bit Unicode range since they are
- reserved symbols (along with \ and /), otherwise illegal to store
- in filenames in NTFS */
-#define UNI_ASTERIK (__u16) ('*' + 0xF000)
-#define UNI_QUESTION (__u16) ('?' + 0xF000)
-#define UNI_COLON (__u16) (':' + 0xF000)
-#define UNI_GRTRTHAN (__u16) ('>' + 0xF000)
-#define UNI_LESSTHAN (__u16) ('<' + 0xF000)
-#define UNI_PIPE (__u16) ('|' + 0xF000)
-#define UNI_SLASH (__u16) ('\\' + 0xF000)
-
-/* Convert 16 bit Unicode pathname from wire format to string in current code
- page. Conversion may involve remapping up the seven characters that are
- only legal in POSIX-like OS (if they are present in the string). Path
- names are little endian 16 bit Unicode on the wire */
-int
-cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
- const struct nls_table *cp)
-{
- int i, j, len;
- __u16 src_char;
-
- for (i = 0, j = 0; i < maxlen; i++) {
- src_char = le16_to_cpu(source[i]);
- switch (src_char) {
- case 0:
- goto cUCS_out; /* BB check this BB */
- case UNI_COLON:
- target[j] = ':';
- break;
- case UNI_ASTERIK:
- target[j] = '*';
- break;
- case UNI_QUESTION:
- target[j] = '?';
- break;
- /* BB We can not handle remapping slash until
- all the calls to build_path_from_dentry
- are modified, as they use slash as separator BB */
- /* case UNI_SLASH:
- target[j] = '\\';
- break;*/
- case UNI_PIPE:
- target[j] = '|';
- break;
- case UNI_GRTRTHAN:
- target[j] = '>';
- break;
- case UNI_LESSTHAN:
- target[j] = '<';
- break;
- default:
- len = cp->uni2char(src_char, &target[j],
- NLS_MAX_CHARSET_SIZE);
- if (len > 0) {
- j += len;
- continue;
- } else {
- target[j] = '?';
- }
- }
- j++;
- /* make sure we do not overrun callers allocated temp buffer */
- if (j >= (2 * NAME_MAX))
- break;
- }
-cUCS_out:
- target[j] = 0;
- return j;
-}
-
/* Convert 16 bit Unicode pathname to wire format from string in current code
page. Conversion may involve remapping up the seven characters that are
only legal in POSIX-like OS (if they are present in the string). Path
{ErrQuota, -EDQUOT},
{ErrNotALink, -ENOLINK},
{ERRnetlogonNotStarted, -ENOPROTOOPT},
+ {ERRsymlink, -EOPNOTSUPP},
{ErrTooManyLinks, -EMLINK},
{0, 0}
};
ERRDOS, ERRnoaccess, 0xc000028f}, {
ERRDOS, ERRnoaccess, 0xc0000290}, {
ERRDOS, ERRbadfunc, 0xc000029c}, {
+ ERRDOS, ERRsymlink, NT_STATUS_STOPPED_ON_SYMLINK}, {
ERRDOS, ERRinvlevel, 0x007c0001}, };
/*****************************************************************************
extern const struct nt_err_code_struct nt_errs[];
/* Win32 Status codes. */
-
-#define STATUS_BUFFER_OVERFLOW 0x80000005
#define STATUS_MORE_ENTRIES 0x0105
#define ERROR_INVALID_PARAMETER 0x0057
#define ERROR_INSUFFICIENT_BUFFER 0x007a
#define STATUS_SOME_UNMAPPED 0x0107
#define STATUS_BUFFER_OVERFLOW 0x80000005
#define NT_STATUS_NO_MORE_ENTRIES 0x8000001a
+#define NT_STATUS_MEDIA_CHANGED 0x8000001c
+#define NT_STATUS_END_OF_MEDIA 0x8000001e
+#define NT_STATUS_MEDIA_CHECK 0x80000020
+#define NT_STATUS_NO_DATA_DETECTED 0x8000001c
+#define NT_STATUS_STOPPED_ON_SYMLINK 0x8000002d
+#define NT_STATUS_DEVICE_REQUIRES_CLEANING 0x80000288
+#define NT_STATUS_DEVICE_DOOR_OPEN 0x80000288
#define NT_STATUS_UNSUCCESSFUL 0xC0000000 | 0x0001
#define NT_STATUS_NOT_IMPLEMENTED 0xC0000000 | 0x0002
#define NT_STATUS_INVALID_INFO_CLASS 0xC0000000 | 0x0003
#define UnknownMessage cpu_to_le32(8)
/* Negotiate Flags */
-#define NTLMSSP_NEGOTIATE_UNICODE 0x01 /* Text strings are in unicode */
-#define NTLMSSP_NEGOTIATE_OEM 0x02 /* Text strings are in OEM */
-#define NTLMSSP_REQUEST_TARGET 0x04 /* Server return its auth realm */
-#define NTLMSSP_NEGOTIATE_SIGN 0x0010 /* Request signature capability */
-#define NTLMSSP_NEGOTIATE_SEAL 0x0020 /* Request confidentiality */
-#define NTLMSSP_NEGOTIATE_DGRAM 0x0040
-#define NTLMSSP_NEGOTIATE_LM_KEY 0x0080 /* Sign/seal use LM session key */
-#define NTLMSSP_NEGOTIATE_NTLM 0x0200 /* NTLM authentication */
-#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000
+#define NTLMSSP_NEGOTIATE_UNICODE 0x01 /* Text strings are unicode */
+#define NTLMSSP_NEGOTIATE_OEM 0x02 /* Text strings are in OEM */
+#define NTLMSSP_REQUEST_TARGET 0x04 /* Srv returns its auth realm */
+/* define reserved9 0x08 */
+#define NTLMSSP_NEGOTIATE_SIGN 0x0010 /* Request signing capability */
+#define NTLMSSP_NEGOTIATE_SEAL 0x0020 /* Request confidentiality */
+#define NTLMSSP_NEGOTIATE_DGRAM 0x0040
+#define NTLMSSP_NEGOTIATE_LM_KEY 0x0080 /* Use LM session key */
+/* defined reserved 8 0x0100 */
+#define NTLMSSP_NEGOTIATE_NTLM 0x0200 /* NTLM authentication */
+#define NTLMSSP_NEGOTIATE_NT_ONLY 0x0400 /* Lanman not allowed */
+#define NTLMSSP_ANONYMOUS 0x0800
+#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000 /* reserved6 */
#define NTLMSSP_NEGOTIATE_WORKSTATION_SUPPLIED 0x2000
-#define NTLMSSP_NEGOTIATE_LOCAL_CALL 0x4000 /* client/server on same machine */
-#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign for all security levels */
-#define NTLMSSP_TARGET_TYPE_DOMAIN 0x10000
-#define NTLMSSP_TARGET_TYPE_SERVER 0x20000
-#define NTLMSSP_TARGET_TYPE_SHARE 0x40000
-#define NTLMSSP_NEGOTIATE_NTLMV2 0x80000
-#define NTLMSSP_REQUEST_INIT_RESP 0x100000
-#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000
-#define NTLMSSP_REQUEST_NOT_NT_KEY 0x400000
+#define NTLMSSP_NEGOTIATE_LOCAL_CALL 0x4000 /* client/server same machine */
+#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign. All security levels */
+#define NTLMSSP_TARGET_TYPE_DOMAIN 0x10000
+#define NTLMSSP_TARGET_TYPE_SERVER 0x20000
+#define NTLMSSP_TARGET_TYPE_SHARE 0x40000
+#define NTLMSSP_NEGOTIATE_EXTENDED_SEC 0x80000 /* NB:not related to NTLMv2 pwd*/
+/* #define NTLMSSP_REQUEST_INIT_RESP 0x100000 */
+#define NTLMSSP_NEGOTIATE_IDENTIFY 0x100000
+#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000 /* reserved5 */
+#define NTLMSSP_REQUEST_NON_NT_KEY 0x400000
#define NTLMSSP_NEGOTIATE_TARGET_INFO 0x800000
-#define NTLMSSP_NEGOTIATE_128 0x20000000
-#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
-#define NTLMSSP_NEGOTIATE_56 0x80000000
+/* #define reserved4 0x1000000 */
+#define NTLMSSP_NEGOTIATE_VERSION 0x2000000 /* we do not set */
+/* #define reserved3 0x4000000 */
+/* #define reserved2 0x8000000 */
+/* #define reserved1 0x10000000 */
+#define NTLMSSP_NEGOTIATE_128 0x20000000
+#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
+#define NTLMSSP_NEGOTIATE_56 0x80000000
/* Although typedefs are not commonly used for structure definitions */
/* in the Linux kernel, in this particular case they are useful */
typedef struct _SECURITY_BUFFER {
__le16 Length;
__le16 MaximumLength;
- __le32 Buffer; /* offset to buffer */
+ __le32 BufferOffset; /* offset to buffer */
} __attribute__((packed)) SECURITY_BUFFER;
typedef struct _NEGOTIATE_MESSAGE {
__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 1 */
+ __le32 MessageType; /* NtLmNegotiate = 1 */
__le32 NegotiateFlags;
SECURITY_BUFFER DomainName; /* RFC 1001 style and ASCII */
SECURITY_BUFFER WorkstationName; /* RFC 1001 and ASCII */
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
char DomainString[0];
/* followed by WorkstationString */
} __attribute__((packed)) NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
typedef struct _CHALLENGE_MESSAGE {
__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 2 */
+ __le32 MessageType; /* NtLmChallenge = 2 */
SECURITY_BUFFER TargetName;
__le32 NegotiateFlags;
__u8 Challenge[CIFS_CRYPTO_KEY_SIZE];
__u8 Reserved[8];
SECURITY_BUFFER TargetInfoArray;
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
} __attribute__((packed)) CHALLENGE_MESSAGE, *PCHALLENGE_MESSAGE;
typedef struct _AUTHENTICATE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 3 */
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
+ __le32 MessageType; /* NtLmsAuthenticate = 3 */
SECURITY_BUFFER LmChallengeResponse;
SECURITY_BUFFER NtChallengeResponse;
SECURITY_BUFFER DomainName;
SECURITY_BUFFER WorkstationName;
SECURITY_BUFFER SessionKey;
__le32 NegotiateFlags;
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
char UserString[0];
} __attribute__((packed)) AUTHENTICATE_MESSAGE, *PAUTHENTICATE_MESSAGE;
#include "cifs_fs_sb.h"
#include "cifsfs.h"
+/*
+ * To be safe - for UCS to UTF-8 with strings loaded with the rare long
+ * characters alloc more to account for such multibyte target UTF-8
+ * characters.
+ */
+#define UNICODE_NAME_MAX ((4 * NAME_MAX) + 2)
+
#ifdef CONFIG_CIFS_DEBUG2
static void dump_cifs_file_struct(struct file *file, char *label)
{
if (atomic_read(&cifsInfo->inUse) == 0)
atomic_set(&cifsInfo->inUse, 1);
+ cifsInfo->server_eof = end_of_file;
spin_lock(&tmp_inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/* can not safely change the file size here if the
tmp_inode->i_gid = le64_to_cpu(pfindData->Gid);
tmp_inode->i_nlink = le64_to_cpu(pfindData->Nlinks);
+ cifsInfo->server_eof = end_of_file;
spin_lock(&tmp_inode->i_lock);
if (is_size_safe_to_change(cifsInfo, end_of_file)) {
/* can not safely change the file size here if the
}
}
+/* BB eventually need to add the following helper function to
+ resolve NT_STATUS_STOPPED_ON_SYMLINK return code when
+ we try to do FindFirst on (NTFS) directory symlinks */
+/*
+int get_symlink_reparse_path(char *full_path, struct cifs_sb_info *cifs_sb,
+ int xid)
+{
+ __u16 fid;
+ int len;
+ int oplock = 0;
+ int rc;
+ struct cifsTconInfo *ptcon = cifs_sb->tcon;
+ char *tmpbuffer;
+
+ rc = CIFSSMBOpen(xid, ptcon, full_path, FILE_OPEN, GENERIC_READ,
+ OPEN_REPARSE_POINT, &fid, &oplock, NULL,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (!rc) {
+ tmpbuffer = kmalloc(maxpath);
+ rc = CIFSSMBQueryReparseLinkInfo(xid, ptcon, full_path,
+ tmpbuffer,
+ maxpath -1,
+ fid,
+ cifs_sb->local_nls);
+ if (CIFSSMBClose(xid, ptcon, fid)) {
+ cFYI(1, ("Error closing temporary reparsepoint open)"));
+ }
+ }
+}
+ */
+
static int initiate_cifs_search(const int xid, struct file *file)
{
int rc = 0;
CIFS_MOUNT_MAP_SPECIAL_CHR, CIFS_DIR_SEP(cifs_sb));
if (rc == 0)
cifsFile->invalidHandle = false;
- if ((rc == -EOPNOTSUPP) &&
+ /* BB add following call to handle readdir on new NTFS symlink errors
+ else if STATUS_STOPPED_ON_SYMLINK
+ call get_symlink_reparse_path and retry with new path */
+ else if ((rc == -EOPNOTSUPP) &&
(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) {
cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
goto ffirst_retry;
/* inode num, inode type and filename returned */
static int cifs_get_name_from_search_buf(struct qstr *pqst,
char *current_entry, __u16 level, unsigned int unicode,
- struct cifs_sb_info *cifs_sb, int max_len, __u64 *pinum)
+ struct cifs_sb_info *cifs_sb, unsigned int max_len, __u64 *pinum)
{
int rc = 0;
unsigned int len = 0;
len = strnlen(filename, PATH_MAX);
}
- *pinum = pFindData->UniqueId;
+ *pinum = le64_to_cpu(pFindData->UniqueId);
} else if (level == SMB_FIND_FILE_DIRECTORY_INFO) {
FILE_DIRECTORY_INFO *pFindData =
(FILE_DIRECTORY_INFO *)current_entry;
(SEARCH_ID_FULL_DIR_INFO *)current_entry;
filename = &pFindData->FileName[0];
len = le32_to_cpu(pFindData->FileNameLength);
- *pinum = pFindData->UniqueId;
+ *pinum = le64_to_cpu(pFindData->UniqueId);
} else if (level == SMB_FIND_FILE_BOTH_DIRECTORY_INFO) {
FILE_BOTH_DIRECTORY_INFO *pFindData =
(FILE_BOTH_DIRECTORY_INFO *)current_entry;
}
if (unicode) {
- /* BB fixme - test with long names */
- /* Note converted filename can be longer than in unicode */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
- pqst->len = cifs_convertUCSpath((char *)pqst->name,
- (__le16 *)filename, len/2, nlt);
- else
- pqst->len = cifs_strfromUCS_le((char *)pqst->name,
- (__le16 *)filename, len/2, nlt);
+ pqst->len = cifs_from_ucs2((char *) pqst->name,
+ (__le16 *) filename,
+ UNICODE_NAME_MAX,
+ min(len, max_len), nlt,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
} else {
pqst->name = filename;
pqst->len = len;
return rc;
}
-static int cifs_filldir(char *pfindEntry, struct file *file,
- filldir_t filldir, void *direntry, char *scratch_buf, int max_len)
+static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir,
+ void *direntry, char *scratch_buf, unsigned int max_len)
{
int rc = 0;
struct qstr qstring;
int num_to_fill = 0;
char *tmp_buf = NULL;
char *end_of_smb;
- int max_len;
+ unsigned int max_len;
xid = GetXid();
cifsFile->srch_inf.ntwrk_buf_start);
end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + max_len;
- /* To be safe - for UCS to UTF-8 with strings loaded
- with the rare long characters alloc more to account for
- such multibyte target UTF-8 characters. cifs_unicode.c,
- which actually does the conversion, has the same limit */
- tmp_buf = kmalloc((2 * NAME_MAX) + 4, GFP_KERNEL);
+ tmp_buf = kmalloc(UNICODE_NAME_MAX, GFP_KERNEL);
for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
if (current_entry == NULL) {
/* evaluate whether this case is an error */
*
* SMB/CIFS session setup handling routines
*
- * Copyright (c) International Business Machines Corp., 2006, 2007
+ * Copyright (c) International Business Machines Corp., 2006, 2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
get_vc_num_exit:
write_unlock(&cifs_tcp_ses_lock);
- return le16_to_cpu(vcnum);
+ return cpu_to_le16(vcnum);
}
static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
*pbcc_area = bcc_ptr;
}
-static int decode_unicode_ssetup(char **pbcc_area, int bleft,
- struct cifsSesInfo *ses,
- const struct nls_table *nls_cp)
+static void
+decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
+ const struct nls_table *nls_cp)
{
- int rc = 0;
- int words_left, len;
+ int len;
char *data = *pbcc_area;
-
-
cFYI(1, ("bleft %d", bleft));
-
- /* SMB header is unaligned, so cifs servers word align start of
- Unicode strings */
- data++;
- bleft--; /* Windows servers do not always double null terminate
- their final Unicode string - in which case we
- now will not attempt to decode the byte of junk
- which follows it */
-
- words_left = bleft / 2;
-
- /* save off server operating system */
- len = UniStrnlen((wchar_t *) data, words_left);
-
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- if (len >= words_left)
- return rc;
+ /*
+ * Windows servers do not always double null terminate their final
+ * Unicode string. Check to see if there are an uneven number of bytes
+ * left. If so, then add an extra NULL pad byte to the end of the
+ * response.
+ *
+ * See section 2.7.2 in "Implementing CIFS" for details
+ */
+ if (bleft % 2) {
+ data[bleft] = 0;
+ ++bleft;
+ }
kfree(ses->serverOS);
- /* UTF-8 string will not grow more than four times as big as UCS-16 */
- ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
- if (ses->serverOS != NULL)
- cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
- data += 2 * (len + 1);
- words_left -= len + 1;
-
- /* save off server network operating system */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len >= words_left)
- return rc;
+ ses->serverOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverOS=%s", ses->serverOS));
+ len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+ data += len;
+ bleft -= len;
+ if (bleft <= 0)
+ return;
kfree(ses->serverNOS);
- ses->serverNOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
- if (ses->serverNOS != NULL) {
- cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
- nls_cp);
- if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) {
- cFYI(1, ("NT4 server"));
- ses->flags |= CIFS_SES_NT4;
- }
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
-
- /* save off server domain */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len > words_left)
- return rc;
+ ses->serverNOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverNOS=%s", ses->serverNOS));
+ len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+ data += len;
+ bleft -= len;
+ if (bleft <= 0)
+ return;
kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2 * (len + 1), GFP_KERNEL); /* BB FIXME wrong length */
- if (ses->serverDomain != NULL) {
- cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
- nls_cp);
- ses->serverDomain[2*len] = 0;
- ses->serverDomain[(2*len) + 1] = 0;
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
+ ses->serverDomain = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverDomain=%s", ses->serverDomain));
- cFYI(1, ("words left: %d", words_left));
-
- return rc;
+ return;
}
static int decode_ascii_ssetup(char **pbcc_area, int bleft,
return rc;
}
+static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
+ struct cifsSesInfo *ses)
+{
+ CHALLENGE_MESSAGE *pblob = (CHALLENGE_MESSAGE *)bcc_ptr;
+
+ if (blob_len < sizeof(CHALLENGE_MESSAGE)) {
+ cERROR(1, ("challenge blob len %d too small", blob_len));
+ return -EINVAL;
+ }
+
+ if (memcmp(pblob->Signature, "NTLMSSP", 8)) {
+ cERROR(1, ("blob signature incorrect %s", pblob->Signature));
+ return -EINVAL;
+ }
+ if (pblob->MessageType != NtLmChallenge) {
+ cERROR(1, ("Incorrect message type %d", pblob->MessageType));
+ return -EINVAL;
+ }
+
+ memcpy(ses->server->cryptKey, pblob->Challenge, CIFS_CRYPTO_KEY_SIZE);
+ /* BB we could decode pblob->NegotiateFlags; some may be useful */
+ /* In particular we can examine sign flags */
+ /* BB spec says that if AvId field of MsvAvTimestamp is populated then
+ we must set the MIC field of the AUTHENTICATE_MESSAGE */
+
+ return 0;
+}
+
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+/* BB Move to ntlmssp.c eventually */
+
+/* We do not malloc the blob, it is passed in pbuffer, because
+ it is fixed size, and small, making this approach cleaner */
+static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer,
+ struct cifsSesInfo *ses)
+{
+ NEGOTIATE_MESSAGE *sec_blob = (NEGOTIATE_MESSAGE *)pbuffer;
+ __u32 flags;
+
+ memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+ sec_blob->MessageType = NtLmNegotiate;
+
+ /* BB is NTLMV2 session security format easier to use here? */
+ flags = NTLMSSP_NEGOTIATE_56 | NTLMSSP_REQUEST_TARGET |
+ NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+ NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+ if (ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ flags |= NTLMSSP_NEGOTIATE_SIGN;
+ if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+ flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+ sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+ sec_blob->WorkstationName.BufferOffset = 0;
+ sec_blob->WorkstationName.Length = 0;
+ sec_blob->WorkstationName.MaximumLength = 0;
+
+ /* Domain name is sent on the Challenge not Negotiate NTLMSSP request */
+ sec_blob->DomainName.BufferOffset = 0;
+ sec_blob->DomainName.Length = 0;
+ sec_blob->DomainName.MaximumLength = 0;
+}
+
+/* We do not malloc the blob, it is passed in pbuffer, because its
+ maximum possible size is fixed and small, making this approach cleaner.
+ This function returns the length of the data in the blob */
+static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
+ struct cifsSesInfo *ses,
+ const struct nls_table *nls_cp, int first)
+{
+ AUTHENTICATE_MESSAGE *sec_blob = (AUTHENTICATE_MESSAGE *)pbuffer;
+ __u32 flags;
+ unsigned char *tmp;
+ char ntlm_session_key[CIFS_SESS_KEY_SIZE];
+
+ memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+ sec_blob->MessageType = NtLmAuthenticate;
+
+ flags = NTLMSSP_NEGOTIATE_56 |
+ NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_TARGET_INFO |
+ NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+ NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+ if (ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ flags |= NTLMSSP_NEGOTIATE_SIGN;
+ if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+ flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+ tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE);
+ sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+ sec_blob->LmChallengeResponse.BufferOffset =
+ cpu_to_le32(sizeof(AUTHENTICATE_MESSAGE));
+ sec_blob->LmChallengeResponse.Length = 0;
+ sec_blob->LmChallengeResponse.MaximumLength = 0;
+
+ /* calculate session key, BB what about adding similar ntlmv2 path? */
+ SMBNTencrypt(ses->password, ses->server->cryptKey, ntlm_session_key);
+ if (first)
+ cifs_calculate_mac_key(&ses->server->mac_signing_key,
+ ntlm_session_key, ses->password);
+
+ memcpy(tmp, ntlm_session_key, CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->NtChallengeResponse.Length = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.MaximumLength =
+ cpu_to_le16(CIFS_SESS_KEY_SIZE);
+
+ tmp += CIFS_SESS_KEY_SIZE;
+
+ if (ses->domainName == NULL) {
+ sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->DomainName.Length = 0;
+ sec_blob->DomainName.MaximumLength = 0;
+ tmp += 2;
+ } else {
+ int len;
+ len = cifs_strtoUCS((__le16 *)tmp, ses->domainName,
+ MAX_USERNAME_SIZE, nls_cp);
+ len *= 2; /* unicode is 2 bytes each */
+ len += 2; /* trailing null */
+ sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->DomainName.Length = cpu_to_le16(len);
+ sec_blob->DomainName.MaximumLength = cpu_to_le16(len);
+ tmp += len;
+ }
+
+ if (ses->userName == NULL) {
+ sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->UserName.Length = 0;
+ sec_blob->UserName.MaximumLength = 0;
+ tmp += 2;
+ } else {
+ int len;
+ len = cifs_strtoUCS((__le16 *)tmp, ses->userName,
+ MAX_USERNAME_SIZE, nls_cp);
+ len *= 2; /* unicode is 2 bytes each */
+ len += 2; /* trailing null */
+ sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->UserName.Length = cpu_to_le16(len);
+ sec_blob->UserName.MaximumLength = cpu_to_le16(len);
+ tmp += len;
+ }
+
+ sec_blob->WorkstationName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->WorkstationName.Length = 0;
+ sec_blob->WorkstationName.MaximumLength = 0;
+ tmp += 2;
+
+ sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->SessionKey.Length = 0;
+ sec_blob->SessionKey.MaximumLength = 0;
+ return tmp - pbuffer;
+}
+
+
+static void setup_ntlmssp_neg_req(SESSION_SETUP_ANDX *pSMB,
+ struct cifsSesInfo *ses)
+{
+ build_ntlmssp_negotiate_blob(&pSMB->req.SecurityBlob[0], ses);
+ pSMB->req.SecurityBlobLength = cpu_to_le16(sizeof(NEGOTIATE_MESSAGE));
+
+ return;
+}
+
+static int setup_ntlmssp_auth_req(SESSION_SETUP_ANDX *pSMB,
+ struct cifsSesInfo *ses,
+ const struct nls_table *nls, int first_time)
+{
+ int bloblen;
+
+ bloblen = build_ntlmssp_auth_blob(&pSMB->req.SecurityBlob[0], ses, nls,
+ first_time);
+ pSMB->req.SecurityBlobLength = cpu_to_le16(bloblen);
+
+ return bloblen;
+}
+#endif
+
int
CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
const struct nls_table *nls_cp)
__u16 action;
int bytes_remaining;
struct key *spnego_key = NULL;
+ __le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
if (ses == NULL)
return -EINVAL;
type = ses->server->secType;
cFYI(1, ("sess setup type %d", type));
+ssetup_ntlmssp_authenticate:
+ if (phase == NtLmChallenge)
+ phase = NtLmAuthenticate; /* if ntlmssp, now final phase */
+
if (type == LANMAN) {
#ifndef CONFIG_CIFS_WEAK_PW_HASH
/* LANMAN and plaintext are less secure and off by default.
goto ssetup_exit;
#endif /* CONFIG_CIFS_UPCALL */
} else {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+ if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
+ cERROR(1, ("NTLMSSP requires Unicode support"));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+
+ cFYI(1, ("ntlmssp session setup phase %d", phase));
+ pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ capabilities |= CAP_EXTENDED_SECURITY;
+ pSMB->req.Capabilities |= cpu_to_le32(capabilities);
+ if (phase == NtLmNegotiate) {
+ setup_ntlmssp_neg_req(pSMB, ses);
+ iov[1].iov_len = sizeof(NEGOTIATE_MESSAGE);
+ } else if (phase == NtLmAuthenticate) {
+ int blob_len;
+ blob_len = setup_ntlmssp_auth_req(pSMB, ses,
+ nls_cp,
+ first_time);
+ iov[1].iov_len = blob_len;
+ /* Make sure that we tell the server that we
+ are using the uid that it just gave us back
+ on the response (challenge) */
+ smb_buf->Uid = ses->Suid;
+ } else {
+ cERROR(1, ("invalid phase %d", phase));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+ iov[1].iov_base = &pSMB->req.SecurityBlob[0];
+ /* unicode strings must be word aligned */
+ if ((iov[0].iov_len + iov[1].iov_len) % 2) {
+ *bcc_ptr = 0;
+ bcc_ptr++;
+ }
+ unicode_oslm_strings(&bcc_ptr, nls_cp);
+ } else {
+ cERROR(1, ("secType %d not supported!", type));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+#else
cERROR(1, ("secType %d not supported!", type));
rc = -ENOSYS;
goto ssetup_exit;
+#endif
}
iov[2].iov_base = str_area;
/* SMB request buf freed in SendReceive2 */
cFYI(1, ("ssetup rc from sendrecv2 is %d", rc));
- if (rc)
- goto ssetup_exit;
pSMB = (SESSION_SETUP_ANDX *)iov[0].iov_base;
smb_buf = (struct smb_hdr *)iov[0].iov_base;
+ if ((type == RawNTLMSSP) && (smb_buf->Status.CifsError ==
+ cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))) {
+ if (phase != NtLmNegotiate) {
+ cERROR(1, ("Unexpected more processing error"));
+ goto ssetup_exit;
+ }
+ /* NTLMSSP Negotiate sent now processing challenge (response) */
+ phase = NtLmChallenge; /* process ntlmssp challenge */
+ rc = 0; /* MORE_PROC rc is not an error here, but expected */
+ }
+ if (rc)
+ goto ssetup_exit;
+
if ((smb_buf->WordCount != 3) && (smb_buf->WordCount != 4)) {
rc = -EIO;
cERROR(1, ("bad word count %d", smb_buf->WordCount));
if (smb_buf->WordCount == 4) {
__u16 blob_len;
blob_len = le16_to_cpu(pSMB->resp.SecurityBlobLength);
- bcc_ptr += blob_len;
if (blob_len > bytes_remaining) {
cERROR(1, ("bad security blob length %d", blob_len));
rc = -EINVAL;
goto ssetup_exit;
}
+ if (phase == NtLmChallenge) {
+ rc = decode_ntlmssp_challenge(bcc_ptr, blob_len, ses);
+ /* now goto beginning for ntlmssp authenticate phase */
+ if (rc)
+ goto ssetup_exit;
+ }
+ bcc_ptr += blob_len;
bytes_remaining -= blob_len;
}
/* BB check if Unicode and decode strings */
- if (smb_buf->Flags2 & SMBFLG2_UNICODE)
- rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining,
- ses, nls_cp);
- else
+ if (smb_buf->Flags2 & SMBFLG2_UNICODE) {
+ /* unicode string area must be word-aligned */
+ if (((unsigned long) bcc_ptr - (unsigned long) smb_buf) % 2) {
+ ++bcc_ptr;
+ --bytes_remaining;
+ }
+ decode_unicode_ssetup(&bcc_ptr, bytes_remaining, ses, nls_cp);
+ } else {
rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining,
ses, nls_cp);
+ }
ssetup_exit:
if (spnego_key) {
} else if (resp_buf_type == CIFS_LARGE_BUFFER)
cifs_buf_release(iov[0].iov_base);
+ /* if ntlmssp, and negotiate succeeded, proceed to authenticate phase */
+ if ((phase == NtLmChallenge) && (rc == 0))
+ goto ssetup_ntlmssp_authenticate;
+
return rc;
}
/* Below errors are used internally (do not come over the wire) for passthrough
from STATUS codes to POSIX only */
+#define ERRsymlink 0xFFFD
#define ErrTooManyLinks 0xFFFE
/* Following error codes may be generated with the ERRSRV error class.*/
struct compat_stat __user *statbuf)
{
struct kstat stat;
- int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_compat_stat(&stat, statbuf);
- return error;
+ error = vfs_stat(filename, &stat);
+ if (error)
+ return error;
+ return cp_compat_stat(&stat, statbuf);
}
asmlinkage long compat_sys_newlstat(char __user * filename,
struct compat_stat __user *statbuf)
{
struct kstat stat;
- int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_compat_stat(&stat, statbuf);
- return error;
+ error = vfs_lstat(filename, &stat);
+ if (error)
+ return error;
+ return cp_compat_stat(&stat, statbuf);
}
#ifndef __ARCH_WANT_STAT64
struct compat_stat __user *statbuf, int flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_compat_stat(&stat, statbuf);
+ int error;
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_compat_stat(&stat, statbuf);
}
#endif
struct linux_binprm *bprm;
struct file *file;
struct files_struct *displaced;
+ bool clear_in_exec;
int retval;
retval = unshare_files(&displaced);
goto out_unlock;
retval = check_unsafe_exec(bprm);
- if (retval)
+ if (retval < 0)
goto out_unlock;
+ clear_in_exec = retval;
file = open_exec(filename);
retval = PTR_ERR(file);
goto out;
/* execve succeeded */
- write_lock(¤t->fs->lock);
current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
current->in_execve = 0;
mutex_unlock(¤t->cred_exec_mutex);
acct_update_integrals(current);
}
out_unmark:
- write_lock(¤t->fs->lock);
- current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
+ if (clear_in_exec)
+ current->fs->in_exec = 0;
out_unlock:
current->in_execve = 0;
#include <linux/i2c.h>
#include <linux/i2c-dev.h>
#include <linux/atalk.h>
-#include <linux/loop.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci.h>
#include <linux/gigaset_dev.h>
#ifdef CONFIG_BLOCK
+#include <linux/loop.h>
#include <scsi/scsi.h>
#include <scsi/scsi_ioctl.h>
#include <scsi/sg.h>
HANDLE_IOCTL(SONET_GETFRSENSE, do_atm_ioctl)
/* block stuff */
#ifdef CONFIG_BLOCK
+/* loop */
+IGNORE_IOCTL(LOOP_CLR_FD)
/* Raw devices */
HANDLE_IOCTL(RAW_SETBIND, raw_ioctl)
HANDLE_IOCTL(RAW_GETBIND, raw_ioctl)
IGNORE_IOCTL(VFAT_IOCTL_READDIR_BOTH32)
IGNORE_IOCTL(VFAT_IOCTL_READDIR_SHORT32)
-/* loop */
-IGNORE_IOCTL(LOOP_CLR_FD)
-
#ifdef CONFIG_SPARC
/* Sparc framebuffers, handled in sbusfb_compat_ioctl() */
IGNORE_IOCTL(FBIOGTYPE)
struct path path;
struct configfs_dirent *sd;
struct config_item *parent_item;
- struct config_item *target_item;
+ struct config_item *target_item = NULL;
struct config_item_type *type;
ret = -EPERM; /* What lack-of-symlink returns */
if ((flags & DCACHE_REFERENCED)
&& (dentry->d_flags & DCACHE_REFERENCED)) {
dentry->d_flags &= ~DCACHE_REFERENCED;
- list_move_tail(&dentry->d_lru, &referenced);
+ list_move(&dentry->d_lru, &referenced);
spin_unlock(&dentry->d_lock);
} else {
list_move_tail(&dentry->d_lru, &tmp);
int result;
unsigned long seq;
- /* FIXME: This is old behavior, needed? Please check callers. */
if (new_dentry == old_dentry)
return 1;
#define PARSE_MOUNT 0
#define PARSE_REMOUNT 1
+/*
+ * parse_mount_options():
+ * Set @opts to mount options specified in @data. If an option is not
+ * specified in @data, set it to its default value. The exception is
+ * 'newinstance' option which can only be set/cleared on a mount (i.e.
+ * cannot be changed during remount).
+ *
+ * Note: @data may be NULL (in which case all options are set to default).
+ */
static int parse_mount_options(char *data, int op, struct pts_mount_opts *opts)
{
char *p;
struct pts_mount_opts opts;
struct super_block *s;
- memset(&opts, 0, sizeof(opts));
- if (data) {
- error = parse_mount_options(data, PARSE_MOUNT, &opts);
- if (error)
- return error;
- }
+ error = parse_mount_options(data, PARSE_MOUNT, &opts);
+ if (error)
+ return error;
if (opts.newinstance)
s = sget(fs_type, NULL, set_anon_super, NULL);
return 0;
out_dput:
- dput(s->s_root);
+ dput(s->s_root); /* undo dget() in simple_set_mnt() */
out_undo_sget:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return error;
}
struct bio *bio;
bio = bio_alloc(GFP_KERNEL, nr_vecs);
- if (bio == NULL)
- return -ENOMEM;
bio->bi_bdev = bdev;
bio->bi_sector = first_sector;
ecryptfs_inode = page->mapping->host;
crypt_stat =
&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
- if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page,
- 0, PAGE_CACHE_SIZE);
- if (rc)
- printk(KERN_ERR "%s: Error attempting to copy "
- "page at index [%ld]\n", __func__,
- page->index);
- goto out;
- }
+ BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
enc_extent_page = alloc_page(GFP_USER);
if (!enc_extent_page) {
rc = -ENOMEM;
ecryptfs_inode = page->mapping->host;
crypt_stat =
&(ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat);
- if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
- rc = ecryptfs_read_lower_page_segment(page, page->index, 0,
- PAGE_CACHE_SIZE,
- ecryptfs_inode);
- if (rc)
- printk(KERN_ERR "%s: Error attempting to copy "
- "page at index [%ld]\n", __func__,
- page->index);
- goto out;
- }
+ BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
enc_extent_page = alloc_page(GFP_USER);
if (!enc_extent_page) {
rc = -ENOMEM;
#define ECRYPTFS_ENCRYPT_FILENAMES 0x00000800
#define ECRYPTFS_ENCFN_USE_MOUNT_FNEK 0x00001000
#define ECRYPTFS_ENCFN_USE_FEK 0x00002000
+#define ECRYPTFS_UNLINK_SIGS 0x00004000
u32 flags;
unsigned int file_version;
size_t iv_bytes;
goto out_d_drop;
}
lower_dir_dentry = ecryptfs_dentry_to_lower(ecryptfs_dentry->d_parent);
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
lower_dentry = lookup_one_len(ecryptfs_dentry->d_name.name,
lower_dir_dentry,
ecryptfs_dentry->d_name.len);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
"filename; rc = [%d]\n", __func__, rc);
goto out_d_drop;
}
+ mutex_lock(&lower_dir_dentry->d_inode->i_mutex);
lower_dentry = lookup_one_len(encrypted_and_encoded_name,
lower_dir_dentry,
encrypted_and_encoded_name_size - 1);
+ mutex_unlock(&lower_dir_dentry->d_inode->i_mutex);
if (IS_ERR(lower_dentry)) {
rc = PTR_ERR(lower_dentry);
printk(KERN_ERR "%s: lookup_one_len() returned [%d] on "
ecryptfs_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
{
char *lower_buf;
+ size_t lower_bufsiz;
struct dentry *lower_dentry;
- struct ecryptfs_crypt_stat *crypt_stat;
+ struct ecryptfs_mount_crypt_stat *mount_crypt_stat;
char *plaintext_name;
size_t plaintext_name_size;
mm_segment_t old_fs;
rc = -EINVAL;
goto out;
}
- crypt_stat = &ecryptfs_inode_to_private(dentry->d_inode)->crypt_stat;
+ mount_crypt_stat = &ecryptfs_superblock_to_private(
+ dentry->d_sb)->mount_crypt_stat;
+ /*
+ * If the lower filename is encrypted, it will result in a significantly
+ * longer name. If needed, truncate the name after decode and decrypt.
+ */
+ if (mount_crypt_stat->flags & ECRYPTFS_GLOBAL_ENCRYPT_FILENAMES)
+ lower_bufsiz = PATH_MAX;
+ else
+ lower_bufsiz = bufsiz;
/* Released in this function */
- lower_buf = kmalloc(bufsiz, GFP_KERNEL);
+ lower_buf = kmalloc(lower_bufsiz, GFP_KERNEL);
if (lower_buf == NULL) {
printk(KERN_ERR "%s: Out of memory whilst attempting to "
- "kmalloc [%d] bytes\n", __func__, bufsiz);
+ "kmalloc [%zd] bytes\n", __func__, lower_bufsiz);
rc = -ENOMEM;
goto out;
}
set_fs(get_ds());
rc = lower_dentry->d_inode->i_op->readlink(lower_dentry,
(char __user *)lower_buf,
- bufsiz);
+ lower_bufsiz);
set_fs(old_fs);
if (rc >= 0) {
rc = ecryptfs_decode_and_decrypt_filename(&plaintext_name,
rc);
goto out_free_lower_buf;
}
- rc = copy_to_user(buf, plaintext_name, plaintext_name_size);
+ /* Check for bufsiz <= 0 done in sys_readlinkat() */
+ rc = copy_to_user(buf, plaintext_name,
+ min((size_t) bufsiz, plaintext_name_size));
if (rc)
rc = -EFAULT;
else
size_t num_zeros = (PAGE_CACHE_SIZE
- (new_length & ~PAGE_CACHE_MASK));
+ if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+ rc = vmtruncate(inode, new_length);
+ if (rc)
+ goto out_free;
+ rc = vmtruncate(lower_dentry->d_inode, new_length);
+ goto out_free;
+ }
if (num_zeros) {
char *zeros_virt;
}
rc = 0;
crypt_stat->flags &= ~(ECRYPTFS_ENCRYPTED);
- mutex_unlock(&crypt_stat->cs_mutex);
- goto out;
}
}
mutex_unlock(&crypt_stat->cs_mutex);
init_special_inode(inode, lower_inode->i_mode,
lower_inode->i_rdev);
dentry->d_op = &ecryptfs_dops;
- if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
- d_add(dentry, inode);
- else
- d_instantiate(dentry, inode);
fsstack_copy_attr_all(inode, lower_inode, NULL);
/* This size will be overwritten for real files w/ headers and
* other metadata */
fsstack_copy_inode_size(inode, lower_inode);
+ if (flags & ECRYPTFS_INTERPOSE_FLAG_D_ADD)
+ d_add(dentry, inode);
+ else
+ d_instantiate(dentry, inode);
out:
return rc;
}
ecryptfs_opt_passthrough, ecryptfs_opt_xattr_metadata,
ecryptfs_opt_encrypted_view, ecryptfs_opt_fnek_sig,
ecryptfs_opt_fn_cipher, ecryptfs_opt_fn_cipher_key_bytes,
- ecryptfs_opt_err };
+ ecryptfs_opt_unlink_sigs, ecryptfs_opt_err };
static const match_table_t tokens = {
{ecryptfs_opt_sig, "sig=%s"},
{ecryptfs_opt_fnek_sig, "ecryptfs_fnek_sig=%s"},
{ecryptfs_opt_fn_cipher, "ecryptfs_fn_cipher=%s"},
{ecryptfs_opt_fn_cipher_key_bytes, "ecryptfs_fn_key_bytes=%u"},
+ {ecryptfs_opt_unlink_sigs, "ecryptfs_unlink_sigs"},
{ecryptfs_opt_err, NULL}
};
fn_cipher_key_bytes;
fn_cipher_key_bytes_set = 1;
break;
+ case ecryptfs_opt_unlink_sigs:
+ mount_crypt_stat->flags |= ECRYPTFS_UNLINK_SIGS;
+ break;
case ecryptfs_opt_err:
default:
printk(KERN_WARNING
}
goto out;
out_abort:
- dput(sb->s_root);
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ dput(sb->s_root); /* aka mnt->mnt_root, as set by get_sb_nodev() */
+ deactivate_locked_super(sb);
out:
return rc;
}
return rc;
}
-static int
-ecryptfs_send_message_locked(char *data, int data_len, u8 msg_type,
- struct ecryptfs_msg_ctx **msg_ctx);
-
-/**
- * ecryptfs_send_raw_message
- * @msg_type: Message type
- * @daemon: Daemon struct for recipient of message
- *
- * A raw message is one that does not include an ecryptfs_message
- * struct. It simply has a type.
- *
- * Must be called with ecryptfs_daemon_hash_mux held.
- *
- * Returns zero on success; non-zero otherwise
- */
-static int ecryptfs_send_raw_message(u8 msg_type,
- struct ecryptfs_daemon *daemon)
-{
- struct ecryptfs_msg_ctx *msg_ctx;
- int rc;
-
- rc = ecryptfs_send_message_locked(NULL, 0, msg_type, &msg_ctx);
- if (rc) {
- printk(KERN_ERR "%s: Error whilst attempting to send "
- "message to ecryptfsd; rc = [%d]\n", __func__, rc);
- goto out;
- }
- /* Raw messages are logically context-free (e.g., no
- * reply is expected), so we set the state of the
- * ecryptfs_msg_ctx object to indicate that it should
- * be freed as soon as the message is sent. */
- mutex_lock(&msg_ctx->mux);
- msg_ctx->state = ECRYPTFS_MSG_CTX_STATE_NO_REPLY;
- mutex_unlock(&msg_ctx->mux);
-out:
- return rc;
-}
-
/**
* ecryptfs_spawn_daemon - Create and initialize a new daemon struct
* @daemon: Pointer to set to newly allocated daemon struct
return rc;
}
-/**
- * ecryptfs_process_helo
- * @euid: The user ID owner of the message
- * @user_ns: The namespace in which @euid applies
- * @pid: The process ID for the userspace program that sent the
- * message
- *
- * Adds the euid and pid values to the daemon euid hash. If an euid
- * already has a daemon pid registered, the daemon will be
- * unregistered before the new daemon is put into the hash list.
- * Returns zero after adding a new daemon to the hash list;
- * non-zero otherwise.
- */
-int ecryptfs_process_helo(uid_t euid, struct user_namespace *user_ns,
- struct pid *pid)
-{
- struct ecryptfs_daemon *new_daemon;
- struct ecryptfs_daemon *old_daemon;
- int rc;
-
- mutex_lock(&ecryptfs_daemon_hash_mux);
- rc = ecryptfs_find_daemon_by_euid(&old_daemon, euid, user_ns);
- if (rc != 0) {
- printk(KERN_WARNING "Received request from user [%d] "
- "to register daemon [0x%p]; unregistering daemon "
- "[0x%p]\n", euid, pid, old_daemon->pid);
- rc = ecryptfs_send_raw_message(ECRYPTFS_MSG_QUIT, old_daemon);
- if (rc)
- printk(KERN_WARNING "Failed to send QUIT "
- "message to daemon [0x%p]; rc = [%d]\n",
- old_daemon->pid, rc);
- hlist_del(&old_daemon->euid_chain);
- kfree(old_daemon);
- }
- rc = ecryptfs_spawn_daemon(&new_daemon, euid, user_ns, pid);
- if (rc)
- printk(KERN_ERR "%s: The gods are displeased with this attempt "
- "to create a new daemon object for euid [%d]; pid "
- "[0x%p]; rc = [%d]\n", __func__, euid, pid, rc);
- mutex_unlock(&ecryptfs_daemon_hash_mux);
- return rc;
-}
-
/**
* ecryptfs_exorcise_daemon - Destroy the daemon struct
*
int rc = 0;
mutex_lock(&msg_ctx->mux);
- if (data) {
- msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
- GFP_KERNEL);
- if (!msg_ctx->msg) {
- rc = -ENOMEM;
- printk(KERN_ERR "%s: Out of memory whilst attempting "
- "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
- (sizeof(*msg_ctx->msg) + data_size));
- goto out_unlock;
- }
- } else
- msg_ctx->msg = NULL;
+ msg_ctx->msg = kmalloc((sizeof(*msg_ctx->msg) + data_size),
+ GFP_KERNEL);
+ if (!msg_ctx->msg) {
+ rc = -ENOMEM;
+ printk(KERN_ERR "%s: Out of memory whilst attempting "
+ "to kmalloc(%zd, GFP_KERNEL)\n", __func__,
+ (sizeof(*msg_ctx->msg) + data_size));
+ goto out_unlock;
+ }
msg_ctx->msg->index = msg_ctx->index;
msg_ctx->msg->data_len = data_size;
msg_ctx->type = msg_type;
- if (data) {
- memcpy(msg_ctx->msg->data, data, data_size);
- msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
- } else
- msg_ctx->msg_size = 0;
+ memcpy(msg_ctx->msg->data, data, data_size);
+ msg_ctx->msg_size = (sizeof(*msg_ctx->msg) + data_size);
mutex_lock(&daemon->mux);
list_add_tail(&msg_ctx->daemon_out_list, &daemon->msg_ctx_out_queue);
daemon->num_queued_msg_ctx++;
if (count == 0)
goto out;
- data = kmalloc(count, GFP_KERNEL);
- if (!data) {
- printk(KERN_ERR "%s: Out of memory whilst attempting to "
- "kmalloc([%zd], GFP_KERNEL)\n", __func__, count);
+
+ data = memdup_user(buf, count);
+ if (IS_ERR(data)) {
+ printk(KERN_ERR "%s: memdup_user returned error [%ld]\n",
+ __func__, PTR_ERR(data));
goto out;
}
- rc = copy_from_user(data, buf, count);
- if (rc) {
- printk(KERN_ERR "%s: copy_from_user returned error [%d]\n",
- __func__, rc);
- goto out_free;
- }
sz = count;
i = 0;
switch (data[i++]) {
struct ecryptfs_crypt_stat *crypt_stat;
crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
+ BUG_ON(!(crypt_stat->flags & ECRYPTFS_ENCRYPTED));
if (crypt_stat->flags & ECRYPTFS_METADATA_IN_XATTR)
return ecryptfs_write_inode_size_to_xattr(ecryptfs_inode);
else
ecryptfs_printk(KERN_DEBUG, "Not a new file\n");
ecryptfs_printk(KERN_DEBUG, "Calling fill_zeros_to_end_of_page"
"(page w/ index = [0x%.16x], to = [%d])\n", index, to);
+ if (!(crypt_stat->flags & ECRYPTFS_ENCRYPTED)) {
+ rc = ecryptfs_write_lower_page_segment(ecryptfs_inode, page, 0,
+ to);
+ if (!rc) {
+ rc = copied;
+ fsstack_copy_inode_size(ecryptfs_inode,
+ ecryptfs_inode_to_lower(ecryptfs_inode));
+ }
+ goto out;
+ }
/* Fills in zeros if 'to' goes beyond inode size */
rc = fill_zeros_to_end_of_page(page, to);
if (rc) {
size_t size)
{
struct page *ecryptfs_page;
+ struct ecryptfs_crypt_stat *crypt_stat;
+ struct inode *ecryptfs_inode = ecryptfs_file->f_dentry->d_inode;
char *ecryptfs_page_virt;
- loff_t ecryptfs_file_size =
- i_size_read(ecryptfs_file->f_dentry->d_inode);
+ loff_t ecryptfs_file_size = i_size_read(ecryptfs_inode);
loff_t data_offset = 0;
loff_t pos;
int rc = 0;
+ crypt_stat = &ecryptfs_inode_to_private(ecryptfs_inode)->crypt_stat;
/*
* if we are writing beyond current size, then start pos
* at the current size - we'll fill in zeros from there.
flush_dcache_page(ecryptfs_page);
SetPageUptodate(ecryptfs_page);
unlock_page(ecryptfs_page);
- rc = ecryptfs_encrypt_page(ecryptfs_page);
+ if (crypt_stat->flags & ECRYPTFS_ENCRYPTED)
+ rc = ecryptfs_encrypt_page(ecryptfs_page);
+ else
+ rc = ecryptfs_write_lower_page_segment(ecryptfs_inode,
+ ecryptfs_page,
+ start_offset_in_page,
+ data_offset);
page_cache_release(ecryptfs_page);
if (rc) {
printk(KERN_ERR "%s: Error encrypting "
pos += num_bytes;
}
if ((offset + size) > ecryptfs_file_size) {
- i_size_write(ecryptfs_file->f_dentry->d_inode, (offset + size));
- rc = ecryptfs_write_inode_size_to_metadata(
- ecryptfs_file->f_dentry->d_inode);
- if (rc) {
- printk(KERN_ERR "Problem with "
- "ecryptfs_write_inode_size_to_metadata; "
- "rc = [%d]\n", rc);
- goto out;
+ i_size_write(ecryptfs_inode, (offset + size));
+ if (crypt_stat->flags & ECRYPTFS_ENCRYPTED) {
+ rc = ecryptfs_write_inode_size_to_metadata(
+ ecryptfs_inode);
+ if (rc) {
+ printk(KERN_ERR "Problem with "
+ "ecryptfs_write_inode_size_to_metadata; "
+ "rc = [%d]\n", rc);
+ goto out;
+ }
}
}
out:
list_for_each_entry(walker,
&mount_crypt_stat->global_auth_tok_list,
mount_crypt_stat_list) {
- seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
+ if (walker->flags & ECRYPTFS_AUTH_TOK_FNEK)
+ seq_printf(m, ",ecryptfs_fnek_sig=%s", walker->sig);
+ else
+ seq_printf(m, ",ecryptfs_sig=%s", walker->sig);
}
mutex_unlock(&mount_crypt_stat->global_auth_tok_list_mutex);
seq_printf(m, ",ecryptfs_xattr_metadata");
if (mount_crypt_stat->flags & ECRYPTFS_ENCRYPTED_VIEW_ENABLED)
seq_printf(m, ",ecryptfs_encrypted_view");
+ if (mount_crypt_stat->flags & ECRYPTFS_UNLINK_SIGS)
+ seq_printf(m, ",ecryptfs_unlink_sigs");
return 0;
}
SYSCALL_DEFINE1(epoll_create, int, size)
{
- if (size < 0)
+ if (size <= 0)
return -EINVAL;
return sys_epoll_create1(0);
static LIST_HEAD(formats);
static DEFINE_RWLOCK(binfmt_lock);
-int register_binfmt(struct linux_binfmt * fmt)
+int __register_binfmt(struct linux_binfmt * fmt, int insert)
{
if (!fmt)
return -EINVAL;
write_lock(&binfmt_lock);
- list_add(&fmt->lh, &formats);
+ insert ? list_add(&fmt->lh, &formats) :
+ list_add_tail(&fmt->lh, &formats);
write_unlock(&binfmt_lock);
return 0;
}
-EXPORT_SYMBOL(register_binfmt);
+EXPORT_SYMBOL(__register_binfmt);
void unregister_binfmt(struct linux_binfmt * fmt)
{
SYSCALL_DEFINE1(uselib, const char __user *, library)
{
struct file *file;
- struct nameidata nd;
char *tmp = getname(library);
int error = PTR_ERR(tmp);
- if (!IS_ERR(tmp)) {
- error = path_lookup_open(AT_FDCWD, tmp,
- LOOKUP_FOLLOW, &nd,
- FMODE_READ|FMODE_EXEC);
- putname(tmp);
- }
- if (error)
+ if (IS_ERR(tmp))
+ goto out;
+
+ file = do_filp_open(AT_FDCWD, tmp,
+ O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+ MAY_READ | MAY_EXEC | MAY_OPEN);
+ putname(tmp);
+ error = PTR_ERR(file);
+ if (IS_ERR(file))
goto out;
error = -EINVAL;
- if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
+ if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
goto exit;
error = -EACCES;
- if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
+ if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
goto exit;
- error = inode_permission(nd.path.dentry->d_inode,
- MAY_READ | MAY_EXEC | MAY_OPEN);
- if (error)
- goto exit;
- error = ima_path_check(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN);
- if (error)
- goto exit;
-
- file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
- error = PTR_ERR(file);
- if (IS_ERR(file))
- goto out;
-
fsnotify_open(file->f_path.dentry);
error = -ENOEXEC;
}
read_unlock(&binfmt_lock);
}
+exit:
fput(file);
out:
return error;
-exit:
- release_open_intent(&nd);
- path_put(&nd.path);
- goto out;
}
#ifdef CONFIG_MMU
struct file *open_exec(const char *name)
{
- struct nameidata nd;
struct file *file;
int err;
- err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd,
- FMODE_READ|FMODE_EXEC);
- if (err)
+ file = do_filp_open(AT_FDCWD, name,
+ O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+ MAY_EXEC | MAY_OPEN);
+ if (IS_ERR(file))
goto out;
err = -EACCES;
- if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
- goto out_path_put;
-
- if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
- goto out_path_put;
-
- err = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_OPEN);
- if (err)
- goto out_path_put;
- err = ima_path_check(&nd.path, MAY_EXEC | MAY_OPEN);
- if (err)
- goto out_path_put;
+ if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
+ goto exit;
- file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
- if (IS_ERR(file))
- return file;
+ if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
+ goto exit;
fsnotify_open(file->f_path.dentry);
err = deny_write_access(file);
- if (err) {
- fput(file);
- goto out;
- }
+ if (err)
+ goto exit;
+out:
return file;
- out_path_put:
- release_open_intent(&nd);
- path_put(&nd.path);
- out:
+exit:
+ fput(file);
return ERR_PTR(err);
}
EXPORT_SYMBOL(open_exec);
int check_unsafe_exec(struct linux_binprm *bprm)
{
struct task_struct *p = current, *t;
- unsigned long flags;
unsigned n_fs;
int res = 0;
n_fs = 1;
write_lock(&p->fs->lock);
- lock_task_sighand(p, &flags);
+ rcu_read_lock();
for (t = next_thread(p); t != p; t = next_thread(t)) {
if (t->fs == p->fs)
n_fs++;
}
+ rcu_read_unlock();
if (p->fs->users > n_fs) {
bprm->unsafe |= LSM_UNSAFE_SHARE;
} else {
- if (p->fs->in_exec)
- res = -EAGAIN;
- p->fs->in_exec = 1;
+ res = -EAGAIN;
+ if (!p->fs->in_exec) {
+ p->fs->in_exec = 1;
+ res = 1;
+ }
}
-
- unlock_task_sighand(p, &flags);
write_unlock(&p->fs->lock);
return res;
struct linux_binprm *bprm;
struct file *file;
struct files_struct *displaced;
+ bool clear_in_exec;
int retval;
retval = unshare_files(&displaced);
goto out_unlock;
retval = check_unsafe_exec(bprm);
- if (retval)
+ if (retval < 0)
goto out_unlock;
+ clear_in_exec = retval;
file = open_exec(filename);
retval = PTR_ERR(file);
goto out;
/* execve succeeded */
- write_lock(¤t->fs->lock);
current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
current->in_execve = 0;
mutex_unlock(¤t->cred_exec_mutex);
acct_update_integrals(current);
}
out_unmark:
- write_lock(¤t->fs->lock);
- current->fs->in_exec = 0;
- write_unlock(¤t->fs->lock);
+ if (clear_in_exec)
+ current->fs->in_exec = 0;
out_unlock:
current->in_execve = 0;
if (depth == 0)
return (err);
-reread:
- partial = ext2_get_branch(inode, depth, offsets, chain, &err);
+ partial = ext2_get_branch(inode, depth, offsets, chain, &err);
/* Simplest case - block found, no allocation needed */
if (!partial) {
first_block = le32_to_cpu(chain[depth - 1].key);
while (count < maxblocks && count <= blocks_to_boundary) {
ext2_fsblk_t blk;
- if (!verify_chain(chain, partial)) {
+ if (!verify_chain(chain, chain + depth - 1)) {
/*
* Indirect block might be removed by
* truncate while we were reading it.
* Handling of that case: forget what we've
* got now, go to reread.
*/
+ err = -EAGAIN;
count = 0;
- goto changed;
+ break;
}
blk = le32_to_cpu(*(chain[depth-1].p + count));
if (blk == first_block + count)
else
break;
}
- goto got_it;
+ if (err != -EAGAIN)
+ goto got_it;
}
/* Next simple case - plain lookup or failed read of indirect block */
goto cleanup;
mutex_lock(&ei->truncate_mutex);
+ /*
+ * If the indirect block is missing while we are reading
+ * the chain(ext3_get_branch() returns -EAGAIN err), or
+ * if the chain has been changed after we grab the semaphore,
+ * (either because another process truncated this branch, or
+ * another get_block allocated this branch) re-grab the chain to see if
+ * the request block has been allocated or not.
+ *
+ * Since we already block the truncate/other get_block
+ * at this point, we will have the current copy of the chain when we
+ * splice the branch into the tree.
+ */
+ if (err == -EAGAIN || !verify_chain(chain, partial)) {
+ while (partial > chain) {
+ brelse(partial->bh);
+ partial--;
+ }
+ partial = ext2_get_branch(inode, depth, offsets, chain, &err);
+ if (!partial) {
+ count++;
+ mutex_unlock(&ei->truncate_mutex);
+ if (err)
+ goto cleanup;
+ clear_buffer_new(bh_result);
+ goto got_it;
+ }
+ }
/*
* Okay, we need to do block allocation. Lazily initialize the block
partial--;
}
return err;
-changed:
- while (partial > chain) {
- brelse(partial->bh);
- partial--;
- }
- goto reread;
}
int ext2_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh_result, int create)
blk++;
}
out:
- if (len == towrite)
+ if (len == towrite) {
+ mutex_unlock(&inode->i_mutex);
return err;
+ }
if (inode->i_size < off+len-towrite)
i_size_write(inode, off+len-towrite);
inode->i_version++;
static int ext4_valid_extent(struct inode *inode, struct ext4_extent *ext)
{
- ext4_fsblk_t block = ext_pblock(ext);
+ ext4_fsblk_t block = ext_pblock(ext), valid_block;
int len = ext4_ext_get_actual_len(ext);
struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
- if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
- ((block + len) > ext4_blocks_count(es))))
+
+ valid_block = le32_to_cpu(es->s_first_data_block) +
+ EXT4_SB(inode->i_sb)->s_gdb_count;
+ if (unlikely(block <= valid_block ||
+ ((block + len) > ext4_blocks_count(es))))
return 0;
else
return 1;
static int ext4_valid_extent_idx(struct inode *inode,
struct ext4_extent_idx *ext_idx)
{
- ext4_fsblk_t block = idx_pblock(ext_idx);
+ ext4_fsblk_t block = idx_pblock(ext_idx), valid_block;
struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
- if (unlikely(block < le32_to_cpu(es->s_first_data_block) ||
- (block >= ext4_blocks_count(es))))
+
+ valid_block = le32_to_cpu(es->s_first_data_block) +
+ EXT4_SB(inode->i_sb)->s_gdb_count;
+ if (unlikely(block <= valid_block ||
+ (block >= ext4_blocks_count(es))))
return 0;
else
return 1;
{
struct ext4_ext_cache *cex;
BUG_ON(len == 0);
+ spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
cex = &EXT4_I(inode)->i_cached_extent;
cex->ec_type = type;
cex->ec_block = block;
cex->ec_len = len;
cex->ec_start = start;
+ spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
}
/*
struct ext4_extent *ex)
{
struct ext4_ext_cache *cex;
+ int ret = EXT4_EXT_CACHE_NO;
+ /*
+ * We borrow i_block_reservation_lock to protect i_cached_extent
+ */
+ spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
cex = &EXT4_I(inode)->i_cached_extent;
/* has cache valid data? */
if (cex->ec_type == EXT4_EXT_CACHE_NO)
- return EXT4_EXT_CACHE_NO;
+ goto errout;
BUG_ON(cex->ec_type != EXT4_EXT_CACHE_GAP &&
cex->ec_type != EXT4_EXT_CACHE_EXTENT);
ext_debug("%u cached by %u:%u:%llu\n",
block,
cex->ec_block, cex->ec_len, cex->ec_start);
- return cex->ec_type;
+ ret = cex->ec_type;
}
-
- /* not in cache */
- return EXT4_EXT_CACHE_NO;
+errout:
+ spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+ return ret;
}
/*
len = ee_len;
bio = bio_alloc(GFP_NOIO, len);
- if (!bio)
- return -ENOMEM;
bio->bi_sector = ee_pblock;
bio->bi_bdev = inode->i_sb->s_bdev;
if (allocated > max_blocks)
allocated = max_blocks;
set_buffer_unwritten(bh_result);
+ bh_result->b_bdev = inode->i_sb->s_bdev;
+ bh_result->b_blocknr = newblock;
goto out2;
}
fallback:
ngroups = sbi->s_groups_count;
avefreei = freei / ngroups;
+fallback_retry:
parent_group = EXT4_I(parent)->i_block_group;
for (i = 0; i < ngroups; i++) {
grp = (parent_group + i) % ngroups;
* filesystems the above test can fail to find any blockgroups
*/
avefreei = 0;
- goto fallback;
+ goto fallback_retry;
}
return -1;
ret2 = find_group_flex(sb, dir, &group);
if (ret2 == -1) {
ret2 = find_group_other(sb, dir, &group, mode);
- if (ret2 == 0 && once)
+ if (ret2 == 0 && once) {
once = 0;
printk(KERN_NOTICE "ext4: find_group_flex "
"failed, fallback succeeded dir %lu\n",
dir->i_ino);
+ }
}
goto got_group;
}
int retval;
clear_buffer_mapped(bh);
+ clear_buffer_unwritten(bh);
/*
* Try to see if we can get the block without requesting
if (retval > 0 && buffer_mapped(bh))
return retval;
+ /*
+ * When we call get_blocks without the create flag, the
+ * BH_Unwritten flag could have gotten set if the blocks
+ * requested were part of a uninitialized extent. We need to
+ * clear this flag now that we are committed to convert all or
+ * part of the uninitialized extent to be an initialized
+ * extent. This is because we need to avoid the combination
+ * of BH_Unwritten and BH_Mapped flags being simultaneously
+ * set on the buffer_head.
+ */
+ clear_buffer_unwritten(bh);
+
/*
* New blocks allocate and/or writing to uninitialized extent
* will possibly result in updating i_data, so we take
struct buffer_head *bh_result, int create)
{
int ret = 0;
+ sector_t invalid_block = ~((sector_t) 0xffff);
+
+ if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
+ invalid_block = ~0;
BUG_ON(create == 0);
BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize);
/* not enough space to reserve */
return ret;
- map_bh(bh_result, inode->i_sb, 0);
+ map_bh(bh_result, inode->i_sb, invalid_block);
set_buffer_new(bh_result);
set_buffer_delay(bh_result);
} else if (ret > 0) {
bh_result->b_size = (ret << inode->i_blkbits);
+ /*
+ * With sub-block writes into unwritten extents
+ * we also need to mark the buffer as new so that
+ * the unwritten parts of the buffer gets correctly zeroed.
+ */
+ if (buffer_unwritten(bh_result))
+ set_buffer_new(bh_result);
ret = 0;
}
ei->i_flags = le32_to_cpu(raw_inode->i_flags);
inode->i_blocks = ext4_inode_blocks(raw_inode, ei);
ei->i_file_acl = le32_to_cpu(raw_inode->i_file_acl_lo);
- if (EXT4_SB(inode->i_sb)->s_es->s_creator_os !=
- cpu_to_le32(EXT4_OS_HURD)) {
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT))
ei->i_file_acl |=
((__u64)le16_to_cpu(raw_inode->i_file_acl_high)) << 32;
- }
inode->i_size = ext4_isize(raw_inode);
ei->i_disksize = inode->i_size;
inode->i_generation = le32_to_cpu(raw_inode->i_generation);
(__u64)(le32_to_cpu(raw_inode->i_version_hi)) << 32;
}
- if (ei->i_flags & EXT4_EXTENTS_FL) {
- /* Validate extent which is part of inode */
- ret = ext4_ext_check_inode(inode);
+ ret = 0;
+ if (ei->i_file_acl &&
+ ((ei->i_file_acl <
+ (le32_to_cpu(EXT4_SB(sb)->s_es->s_first_data_block) +
+ EXT4_SB(sb)->s_gdb_count)) ||
+ (ei->i_file_acl >= ext4_blocks_count(EXT4_SB(sb)->s_es)))) {
+ ext4_error(sb, __func__,
+ "bad extended attribute block %llu in inode #%lu",
+ ei->i_file_acl, inode->i_ino);
+ ret = -EIO;
+ goto bad_inode;
+ } else if (ei->i_flags & EXT4_EXTENTS_FL) {
+ if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
+ (S_ISLNK(inode->i_mode) &&
+ !ext4_inode_is_fast_symlink(inode)))
+ /* Validate extent which is part of inode */
+ ret = ext4_ext_check_inode(inode);
} else if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
(S_ISLNK(inode->i_mode) &&
!ext4_inode_is_fast_symlink(inode))) {
Note that "utf8" is not recommended for FAT filesystems.
If unsure, you shouldn't set "utf8" here.
See <file:Documentation/filesystems/vfat.txt> for more information.
+
+ Enable any character sets you need in File Systems/Native Language
+ Support.
{
if (unlikely(newfd == oldfd)) { /* corner case */
struct files_struct *files = current->files;
+ int retval = oldfd;
+
rcu_read_lock();
if (!fcheck_files(files, oldfd))
- oldfd = -EBADF;
+ retval = -EBADF;
rcu_read_unlock();
- return oldfd;
+ return retval;
}
return sys_dup3(oldfd, newfd, 0);
}
return retval;
}
-int get_filesystem_list(char * buf)
+int __init get_filesystem_list(char *buf)
{
int len = 0;
struct file_system_type * tmp;
}
static int fuse_get_user_pages(struct fuse_req *req, const char __user *buf,
- unsigned *nbytesp, int write)
+ size_t *nbytesp, int write)
{
- unsigned nbytes = *nbytesp;
+ size_t nbytes = *nbytesp;
unsigned long user_addr = (unsigned long) buf;
unsigned offset = user_addr & ~PAGE_MASK;
int npages;
return 0;
}
- nbytes = min(nbytes, (unsigned) FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
+ nbytes = min_t(size_t, nbytes, FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT);
npages = (nbytes + offset + PAGE_SIZE - 1) >> PAGE_SHIFT;
npages = clamp(npages, 1, FUSE_MAX_PAGES_PER_REQ);
down_read(¤t->mm->mmap_sem);
if (vma->vm_flags & VM_MAYSHARE)
return -ENODEV;
+ invalidate_inode_pages2(file->f_mapping);
+
return generic_file_mmap(file, vma);
}
#include <linux/random.h>
#include <linux/sched.h>
#include <linux/exportfs.h>
+#include <linux/smp_lock.h>
MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
MODULE_DESCRIPTION("Filesystem in Userspace");
static void fuse_umount_begin(struct super_block *sb)
{
+ lock_kernel();
fuse_abort_conn(get_fuse_conn_super(sb));
+ unlock_kernel();
}
static void fuse_send_destroy(struct fuse_conn *fc)
err_put_root:
dput(root_dentry);
err_put_conn:
+ bdi_destroy(&fc->bdi);
fuse_conn_put(fc);
err_fput:
fput(file);
GLOCK_BUG_ON(gl, test_bit(GLF_DEMOTE_IN_PROGRESS, &gl->gl_flags));
- down_read(&gfs2_umount_flush_sem);
if (test_bit(GLF_DEMOTE, &gl->gl_flags) &&
gl->gl_demote_state != gl->gl_state) {
if (find_first_holder(gl))
if (ret == 0)
goto out_unlock;
if (ret == 2)
- goto out_sem;
+ goto out;
gh = find_first_waiter(gl);
gl->gl_target = gh->gh_state;
if (!(gh->gh_flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB)))
do_error(gl, 0); /* Fail queued try locks */
}
do_xmote(gl, gh, gl->gl_target);
-out_sem:
- up_read(&gfs2_umount_flush_sem);
+out:
return;
out_sched:
gfs2_glock_put(gl);
out_unlock:
clear_bit(GLF_LOCK, &gl->gl_flags);
- goto out_sem;
+ goto out;
}
static void glock_work_func(struct work_struct *work)
if (test_and_clear_bit(GLF_REPLY_PENDING, &gl->gl_flags))
finish_xmote(gl, gl->gl_reply);
+ down_read(&gfs2_umount_flush_sem);
spin_lock(&gl->gl_spin);
if (test_and_clear_bit(GLF_PENDING_DEMOTE, &gl->gl_flags) &&
gl->gl_state != LM_ST_UNLOCKED &&
}
run_queue(gl, 0);
spin_unlock(&gl->gl_spin);
+ up_read(&gfs2_umount_flush_sem);
if (!delay ||
queue_delayed_work(glock_workqueue, &gl->gl_work, delay) == 0)
gfs2_glock_put(gl);
nr--;
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
+ got_ref = 0;
}
spin_lock(&lru_lock);
if (may_demote)
error = filemap_fdatawait(metamapping);
mapping_set_error(metamapping, error);
gfs2_ail_empty_gl(gl);
+ /*
+ * Writeback of the data mapping may cause the dirty flag to be set
+ * so we have to clear it again here.
+ */
+ smp_mb__before_clear_bit();
+ clear_bit(GLF_DIRTY, &gl->gl_flags);
}
/**
if (S_ISREG(mode)) {
inode->i_op = &gfs2_file_iops;
if (gfs2_localflocks(sdp))
- inode->i_fop = gfs2_file_fops_nolock;
+ inode->i_fop = &gfs2_file_fops_nolock;
else
- inode->i_fop = gfs2_file_fops;
+ inode->i_fop = &gfs2_file_fops;
} else if (S_ISDIR(mode)) {
inode->i_op = &gfs2_dir_iops;
if (gfs2_localflocks(sdp))
- inode->i_fop = gfs2_dir_fops_nolock;
+ inode->i_fop = &gfs2_dir_fops_nolock;
else
- inode->i_fop = gfs2_dir_fops;
+ inode->i_fop = &gfs2_dir_fops;
} else if (S_ISLNK(mode)) {
inode->i_op = &gfs2_symlink_iops;
} else {
extern const struct inode_operations gfs2_file_iops;
extern const struct inode_operations gfs2_dir_iops;
extern const struct inode_operations gfs2_symlink_iops;
-extern const struct file_operations *gfs2_file_fops_nolock;
-extern const struct file_operations *gfs2_dir_fops_nolock;
+extern const struct file_operations gfs2_file_fops_nolock;
+extern const struct file_operations gfs2_dir_fops_nolock;
extern void gfs2_set_inode_flags(struct inode *inode);
#ifdef CONFIG_GFS2_FS_LOCKING_DLM
-extern const struct file_operations *gfs2_file_fops;
-extern const struct file_operations *gfs2_dir_fops;
+extern const struct file_operations gfs2_file_fops;
+extern const struct file_operations gfs2_dir_fops;
+
static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
{
return sdp->sd_args.ar_localflocks;
}
#else /* Single node only */
-#define gfs2_file_fops NULL
-#define gfs2_dir_fops NULL
+#define gfs2_file_fops gfs2_file_fops_nolock
+#define gfs2_dir_fops gfs2_dir_fops_nolock
+
static inline int gfs2_localflocks(const struct gfs2_sbd *sdp)
{
return 1;
gfs2_glock_dq(&gh);
out:
gfs2_holder_uninit(&gh);
- if (ret)
+ if (ret == -ENOMEM)
+ ret = VM_FAULT_OOM;
+ else if (ret)
ret = VM_FAULT_SIGBUS;
return ret;
}
}
}
-const struct file_operations *gfs2_file_fops = &(const struct file_operations){
+const struct file_operations gfs2_file_fops = {
.llseek = gfs2_llseek,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.setlease = gfs2_setlease,
};
-const struct file_operations *gfs2_dir_fops = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops = {
.readdir = gfs2_readdir,
.unlocked_ioctl = gfs2_ioctl,
.open = gfs2_open,
#endif /* CONFIG_GFS2_FS_LOCKING_DLM */
-const struct file_operations *gfs2_file_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_file_fops_nolock = {
.llseek = gfs2_llseek,
.read = do_sync_read,
.aio_read = generic_file_aio_read,
.setlease = generic_setlease,
};
-const struct file_operations *gfs2_dir_fops_nolock = &(const struct file_operations){
+const struct file_operations gfs2_dir_fops_nolock = {
.readdir = gfs2_readdir,
.unlocked_ioctl = gfs2_ioctl,
.open = gfs2_open,
lock_page(page);
bio = bio_alloc(GFP_NOFS, 1);
- if (unlikely(!bio)) {
- __free_page(page);
- return -ENOBUFS;
- }
-
bio->bi_sector = sector * (sb->s_blocksize >> 9);
bio->bi_bdev = sb->s_bdev;
bio_add_page(bio, page, PAGE_SIZE, 0);
static struct super_block *get_gfs2_sb(const char *dev_name)
{
struct super_block *sb;
- struct nameidata nd;
+ struct path path;
int error;
- error = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
+ error = kern_path(dev_name, LOOKUP_FOLLOW, &path);
if (error) {
printk(KERN_WARNING "GFS2: path_lookup on %s returned error %d\n",
dev_name, error);
return NULL;
}
- sb = nd.path.dentry->d_inode->i_sb;
+ sb = path.dentry->d_inode->i_sb;
if (sb && (sb->s_type == &gfs2_fs_type))
atomic_inc(&sb->s_active);
else
sb = NULL;
- path_put(&nd.path);
+ path_put(&path);
return sb;
}
ip = ghs[1].gh_gl->gl_object;
ip->i_disksize = size;
+ i_size_write(inode, size);
error = gfs2_meta_inode_buffer(ip, &dibh);
static LIST_HEAD(qd_lru_list);
static atomic_t qd_lru_count = ATOMIC_INIT(0);
-static spinlock_t qd_lru_lock = SPIN_LOCK_UNLOCKED;
+static DEFINE_SPINLOCK(qd_lru_lock);
int gfs2_shrink_qd_memory(int nr, gfp_t gfp_mask)
{
refrigerator();
t = min(quotad_timeo, statfs_timeo);
- prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_UNINTERRUPTIBLE);
+ prepare_to_wait(&sdp->sd_quota_wait, &wait, TASK_INTERRUPTIBLE);
spin_lock(&sdp->sd_trunc_lock);
empty = list_empty(&sdp->sd_trunc_list);
spin_unlock(&sdp->sd_trunc_lock);
if (tmp == 0)
return BFITNOENT;
ptr--;
- bit = fls64(tmp);
- bit--; /* fls64 always adds one to the bit count */
+ bit = __ffs64(tmp);
bit /= 2; /* two bits per entry in the bitmap */
return (((const unsigned char *)ptr - buf) * GFS2_NBBY) + bit;
}
u64 gfs2_alloc_block(struct gfs2_inode *ip, unsigned int *n)
{
struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode);
+ struct buffer_head *dibh;
struct gfs2_alloc *al = ip->i_alloc;
struct gfs2_rgrpd *rgd = al->al_rgd;
u32 goal, blk;
u64 block;
+ int error;
if (rgrp_contains_block(rgd, ip->i_goal))
goal = ip->i_goal - rgd->rd_data0;
rgd->rd_last_alloc = blk;
block = rgd->rd_data0 + blk;
ip->i_goal = block;
-
+ error = gfs2_meta_inode_buffer(ip, &dibh);
+ if (error == 0) {
+ struct gfs2_dinode *di = (struct gfs2_dinode *)dibh->b_data;
+ gfs2_trans_add_bh(ip->i_gl, dibh, 1);
+ di->di_goal_meta = di->di_goal_data = cpu_to_be64(ip->i_goal);
+ brelse(dibh);
+ }
gfs2_assert_withdraw(sdp, rgd->rd_free >= *n);
rgd->rd_free -= *n;
BUG();
return 0;
}
+
+ if (!tree)
+ return 0;
+
if (tree->node_size >= PAGE_CACHE_SIZE) {
nidx = page->index >> (tree->node_size_shift - PAGE_CACHE_SHIFT);
spin_lock(&tree->hash_lock);
if (HFS_SB(sb)->nls_disk)
unload_nls(HFS_SB(sb)->nls_disk);
+ free_pages((unsigned long)HFS_SB(sb)->bitmap, PAGE_SIZE < 8192 ? 1 : 0);
kfree(HFS_SB(sb));
sb->s_fs_info = NULL;
}
if (!(*flags & MS_RDONLY)) mark_dirty(s);
- kfree(s->s_options);
- s->s_options = new_opts;
+ replace_mount_options(s, new_opts);
return 0;
#include <linux/pagevec.h>
#include <linux/parser.h>
#include <linux/mman.h>
-#include <linux/quotaops.h>
#include <linux/slab.h>
#include <linux/dnotify.h>
#include <linux/statfs.h>
return retval;
}
-/*
- * Read a page. Again trivial. If it didn't already exist
- * in the page cache, it is zero-filled.
- */
-static int hugetlbfs_readpage(struct file *file, struct page * page)
-{
- unlock_page(page);
- return -EINVAL;
-}
-
static int hugetlbfs_write_begin(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
}
static const struct address_space_operations hugetlbfs_aops = {
- .readpage = hugetlbfs_readpage,
.write_begin = hugetlbfs_write_begin,
.write_end = hugetlbfs_write_end,
.set_page_dirty = hugetlbfs_set_page_dirty,
bad_val:
printk(KERN_ERR "hugetlbfs: Bad value '%s' for mount option '%s'\n",
args[0].from, p);
- return 1;
+ return -EINVAL;
}
static int
*/
struct inodes_stat_t inodes_stat;
-static struct kmem_cache * inode_cachep __read_mostly;
+static struct kmem_cache *inode_cachep __read_mostly;
static void wake_up_inode(struct inode *inode)
{
static struct inode_operations empty_iops;
static const struct file_operations empty_fops;
- struct address_space * const mapping = &inode->i_data;
+ struct address_space *const mapping = &inode->i_data;
inode->i_sb = sb;
inode->i_blkbits = sb->s_blocksize_bits;
return NULL;
}
-void destroy_inode(struct inode *inode)
+void destroy_inode(struct inode *inode)
{
BUG_ON(inode_has_buffers(inode));
security_inode_free(inode);
mutex_init(&inode->inotify_mutex);
#endif
}
-
EXPORT_SYMBOL(inode_init_once);
static void init_once(void *foo)
{
- struct inode * inode = (struct inode *) foo;
+ struct inode *inode = (struct inode *) foo;
inode_init_once(inode);
}
/*
* inode_lock must be held
*/
-void __iget(struct inode * inode)
+void __iget(struct inode *inode)
{
if (atomic_read(&inode->i_count)) {
atomic_inc(&inode->i_count);
{
might_sleep();
invalidate_inode_buffers(inode);
-
+
BUG_ON(inode->i_data.nrpages);
BUG_ON(!(inode->i_state & I_FREEING));
BUG_ON(inode->i_state & I_CLEAR);
cd_forget(inode);
inode->i_state = I_CLEAR;
}
-
EXPORT_SYMBOL(clear_inode);
/*
next = head->next;
for (;;) {
- struct list_head * tmp = next;
- struct inode * inode;
+ struct list_head *tmp = next;
+ struct inode *inode;
/*
* We can reschedule here without worrying about the list's
* fails because there are busy inodes then a non zero value is returned.
* If the discard is successful all the inodes have been discarded.
*/
-int invalidate_inodes(struct super_block * sb)
+int invalidate_inodes(struct super_block *sb)
{
int busy;
LIST_HEAD(throw_away);
return busy;
}
-
EXPORT_SYMBOL(invalidate_inodes);
static int can_unuse(struct inode *inode)
* Nasty deadlock avoidance. We may hold various FS locks,
* and we don't want to recurse into the FS that called us
* in clear_inode() and friends..
- */
+ */
if (!(gfp_mask & __GFP_FS))
return -1;
prune_icache(nr);
* by hand after calling find_inode now! This simplifies iunique and won't
* add any additional branch in the common code.
*/
-static struct inode * find_inode(struct super_block * sb, struct hlist_head *head, int (*test)(struct inode *, void *), void *data)
+static struct inode *find_inode(struct super_block *sb,
+ struct hlist_head *head,
+ int (*test)(struct inode *, void *),
+ void *data)
{
struct hlist_node *node;
- struct inode * inode = NULL;
+ struct inode *inode = NULL;
repeat:
hlist_for_each_entry(inode, node, head, i_hash) {
* find_inode_fast is the fast path version of find_inode, see the comment at
* iget_locked for details.
*/
-static struct inode * find_inode_fast(struct super_block * sb, struct hlist_head *head, unsigned long ino)
+static struct inode *find_inode_fast(struct super_block *sb,
+ struct hlist_head *head, unsigned long ino)
{
struct hlist_node *node;
- struct inode * inode = NULL;
+ struct inode *inode = NULL;
repeat:
hlist_for_each_entry(inode, node, head, i_hash) {
* here to attempt to avoid that.
*/
static unsigned int last_ino;
- struct inode * inode;
+ struct inode *inode;
spin_lock_prefetch(&inode_lock);
-
+
inode = alloc_inode(sb);
if (inode) {
spin_lock(&inode_lock);
}
return inode;
}
-
EXPORT_SYMBOL(new_inode);
void unlock_new_inode(struct inode *inode)
inode->i_state &= ~(I_LOCK|I_NEW);
wake_up_inode(inode);
}
-
EXPORT_SYMBOL(unlock_new_inode);
/*
* We no longer cache the sb_flags in i_flags - see fs.h
* -- rmk@arm.uk.linux.org
*/
-static struct inode * get_new_inode(struct super_block *sb, struct hlist_head *head, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *data)
+static struct inode *get_new_inode(struct super_block *sb,
+ struct hlist_head *head,
+ int (*test)(struct inode *, void *),
+ int (*set)(struct inode *, void *),
+ void *data)
{
- struct inode * inode;
+ struct inode *inode;
inode = alloc_inode(sb);
if (inode) {
- struct inode * old;
+ struct inode *old;
spin_lock(&inode_lock);
/* We released the lock, so.. */
* get_new_inode_fast is the fast path version of get_new_inode, see the
* comment at iget_locked for details.
*/
-static struct inode * get_new_inode_fast(struct super_block *sb, struct hlist_head *head, unsigned long ino)
+static struct inode *get_new_inode_fast(struct super_block *sb,
+ struct hlist_head *head, unsigned long ino)
{
- struct inode * inode;
+ struct inode *inode;
inode = alloc_inode(sb);
if (inode) {
- struct inode * old;
+ struct inode *old;
spin_lock(&inode_lock);
/* We released the lock, so.. */
spin_unlock(&inode_lock);
return inode;
}
-
EXPORT_SYMBOL(igrab);
/**
return ifind(sb, head, test, data, 0);
}
-
EXPORT_SYMBOL(ilookup5_nowait);
/**
return ifind(sb, head, test, data, 1);
}
-
EXPORT_SYMBOL(ilookup5);
/**
return ifind_fast(sb, head, ino);
}
-
EXPORT_SYMBOL(ilookup);
/**
*/
return get_new_inode(sb, head, test, set, data);
}
-
EXPORT_SYMBOL(iget5_locked);
/**
*/
return get_new_inode_fast(sb, head, ino);
}
-
EXPORT_SYMBOL(iget_locked);
int insert_inode_locked(struct inode *inode)
iput(old);
}
}
-
EXPORT_SYMBOL(insert_inode_locked);
int insert_inode_locked4(struct inode *inode, unsigned long hashval,
iput(old);
}
}
-
EXPORT_SYMBOL(insert_inode_locked4);
/**
hlist_add_head(&inode->i_hash, head);
spin_unlock(&inode_lock);
}
-
EXPORT_SYMBOL(__insert_inode_hash);
/**
hlist_del_init(&inode->i_hash);
spin_unlock(&inode_lock);
}
-
EXPORT_SYMBOL(remove_inode_hash);
/*
BUG_ON(inode->i_state != I_CLEAR);
destroy_inode(inode);
}
-
EXPORT_SYMBOL(generic_delete_inode);
static void generic_forget_inode(struct inode *inode)
else
generic_forget_inode(inode);
}
-
EXPORT_SYMBOL_GPL(generic_drop_inode);
/*
* Called when we're dropping the last reference
- * to an inode.
+ * to an inode.
*
* Call the FS "drop()" function, defaulting to
* the legacy UNIX filesystem behaviour..
}
/**
- * iput - put an inode
+ * iput - put an inode
* @inode: inode to put
*
* Puts an inode, dropping its usage count. If the inode use count hits
iput_final(inode);
}
}
-
EXPORT_SYMBOL(iput);
/**
* Returns the block number on the device holding the inode that
* is the disk block number for the block of the file requested.
* That is, asked for block 4 of inode 1 the function will return the
- * disk block relative to the disk start that holds that block of the
+ * disk block relative to the disk start that holds that block of the
* file.
*/
-sector_t bmap(struct inode * inode, sector_t block)
+sector_t bmap(struct inode *inode, sector_t block)
{
sector_t res = 0;
if (inode->i_mapping->a_ops->bmap)
mark_inode_dirty_sync(inode);
mnt_drop_write(file->f_path.mnt);
}
-
EXPORT_SYMBOL(file_update_time);
int inode_needs_sync(struct inode *inode)
return 1;
return 0;
}
-
EXPORT_SYMBOL(inode_needs_sync);
int inode_wait(void *word)
spin_lock(&inode_lock);
}
-/*
- * We rarely want to lock two inodes that do not have a parent/child
- * relationship (such as directory, child inode) simultaneously. The
- * vast majority of file systems should be able to get along fine
- * without this. Do not use these functions except as a last resort.
- */
-void inode_double_lock(struct inode *inode1, struct inode *inode2)
-{
- if (inode1 == NULL || inode2 == NULL || inode1 == inode2) {
- if (inode1)
- mutex_lock(&inode1->i_mutex);
- else if (inode2)
- mutex_lock(&inode2->i_mutex);
- return;
- }
-
- if (inode1 < inode2) {
- mutex_lock_nested(&inode1->i_mutex, I_MUTEX_PARENT);
- mutex_lock_nested(&inode2->i_mutex, I_MUTEX_CHILD);
- } else {
- mutex_lock_nested(&inode2->i_mutex, I_MUTEX_PARENT);
- mutex_lock_nested(&inode1->i_mutex, I_MUTEX_CHILD);
- }
-}
-EXPORT_SYMBOL(inode_double_lock);
-
-void inode_double_unlock(struct inode *inode1, struct inode *inode2)
-{
- if (inode1)
- mutex_unlock(&inode1->i_mutex);
-
- if (inode2 && inode2 != inode1)
- mutex_unlock(&inode2->i_mutex);
-}
-EXPORT_SYMBOL(inode_double_unlock);
-
static __initdata unsigned long ihash_entries;
static int __init set_ihash_entries(char *str)
{
long long length = 0, map_len = 0;
u64 logical = 0, phys = 0, size = 0;
u32 flags = FIEMAP_EXTENT_MERGED;
- int ret = 0;
+ int ret = 0, past_eof = 0, whole_file = 0;
if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC)))
return ret;
start_blk = logical_to_blk(inode, start);
length = (long long)min_t(u64, len, i_size_read(inode));
+ if (length < len)
+ whole_file = 1;
+
map_len = length;
do {
/* HOLE */
if (!buffer_mapped(&tmp)) {
+ length -= blk_to_logical(inode, 1);
+ start_blk++;
+
+ /*
+ * we want to handle the case where there is an
+ * allocated block at the front of the file, and then
+ * nothing but holes up to the end of the file properly,
+ * to make sure that extent at the front gets properly
+ * marked with FIEMAP_EXTENT_LAST
+ */
+ if (!past_eof &&
+ blk_to_logical(inode, start_blk) >=
+ blk_to_logical(inode, 0)+i_size_read(inode))
+ past_eof = 1;
+
/*
* first hole after going past the EOF, this is our
* last extent
*/
- if (length <= 0) {
+ if (past_eof && size) {
flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST;
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
break;
}
- length -= blk_to_logical(inode, 1);
-
/* if we have holes up to/past EOF then we're done */
- if (length <= 0)
+ if (length <= 0 || past_eof)
break;
-
- start_blk++;
} else {
- if (length <= 0 && size) {
+ /*
+ * we have gone over the length of what we wanted to
+ * map, and it wasn't the entire file, so add the extent
+ * we got last time and exit.
+ *
+ * This is for the case where say we want to map all the
+ * way up to the second to the last block in a file, but
+ * the last block is a hole, making the second to last
+ * block FIEMAP_EXTENT_LAST. In this case we want to
+ * see if there is a hole after the second to last block
+ * so we can mark it properly. If we found data after
+ * we exceeded the length we were requesting, then we
+ * are good to go, just add the extent to the fieinfo
+ * and break
+ */
+ if (length <= 0 && !whole_file) {
+ ret = fiemap_fill_next_extent(fieinfo, logical,
+ phys, size,
+ flags);
+ break;
+ }
+
+ /*
+ * if size != 0 then we know we already have an extent
+ * to add, so add it.
+ */
+ if (size) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
start_blk += logical_to_blk(inode, size);
/*
- * if we are past the EOF we need to loop again to see
- * if there is a hole so we can mark this extent as the
- * last one, and if not keep mapping things until we
- * find a hole, or we run out of slots in the extent
- * array
+ * If we are past the EOF, then we need to make sure as
+ * soon as we find a hole that the last extent we found
+ * is marked with FIEMAP_EXTENT_LAST
*/
- if (length <= 0)
- continue;
-
- ret = fiemap_fill_next_extent(fieinfo, logical, phys,
- size, flags);
- if (ret)
- break;
+ if (!past_eof &&
+ logical+size >=
+ blk_to_logical(inode, 0)+i_size_read(inode))
+ past_eof = 1;
}
cond_resched();
} while (1);
err = 0;
}
- journal_write_revoke_records(journal, commit_transaction);
+ journal_write_revoke_records(journal, commit_transaction, write_op);
/*
* If we found any dirty or locked buffers, then we should have
* need do nothing.
* RevokeValid set, Revoked set:
* buffer has been revoked.
+ *
+ * Locking rules:
+ * We keep two hash tables of revoke records. One hashtable belongs to the
+ * running transaction (is pointed to by journal->j_revoke), the other one
+ * belongs to the committing transaction. Accesses to the second hash table
+ * happen only from the kjournald and no other thread touches this table. Also
+ * journal_switch_revoke_table() which switches which hashtable belongs to the
+ * running and which to the committing transaction is called only from
+ * kjournald. Therefore we need no locks when accessing the hashtable belonging
+ * to the committing transaction.
+ *
+ * All users operating on the hash table belonging to the running transaction
+ * have a handle to the transaction. Therefore they are safe from kjournald
+ * switching hash tables under them. For operations on the lists of entries in
+ * the hash table j_revoke_lock is used.
+ *
+ * Finally, also replay code uses the hash tables but at this moment noone else
+ * can touch them (filesystem isn't mounted yet) and hence no locking is
+ * needed.
*/
#ifndef __KERNEL__
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/bio.h>
#endif
#include <linux/log2.h>
#ifdef __KERNEL__
static void write_one_revoke_record(journal_t *, transaction_t *,
struct journal_head **, int *,
- struct jbd_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+ struct jbd_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
#endif
/* Utility functions to maintain the revoke table */
* the second time we would still have a pending revoke to cancel. So,
* do not trust the Revoked bit on buffers unless RevokeValid is also
* set.
- *
- * The caller must have the journal locked.
*/
int journal_cancel_revoke(handle_t *handle, struct journal_head *jh)
{
/*
* Write revoke records to the journal for all entries in the current
* revoke hash, deleting the entries as we go.
- *
- * Called with the journal lock held.
*/
-
void journal_write_revoke_records(journal_t *journal,
- transaction_t *transaction)
+ transaction_t *transaction, int write_op)
{
struct journal_head *descriptor;
struct jbd_revoke_record_s *record;
hash_list->next;
write_one_revoke_record(journal, transaction,
&descriptor, &offset,
- record);
+ record, write_op);
count++;
list_del(&record->hash);
kmem_cache_free(revoke_record_cache, record);
}
}
if (descriptor)
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
jbd_debug(1, "Wrote %d revoke records\n", count);
}
transaction_t *transaction,
struct journal_head **descriptorp,
int *offsetp,
- struct jbd_revoke_record_s *record)
+ struct jbd_revoke_record_s *record,
+ int write_op)
{
struct journal_head *descriptor;
int offset;
/* Make sure we have a descriptor with space left for the record */
if (descriptor) {
if (offset == journal->j_blocksize) {
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
descriptor = NULL;
}
}
static void flush_descriptor(journal_t *journal,
struct journal_head *descriptor,
- int offset)
+ int offset, int write_op)
{
journal_revoke_header_t *header;
struct buffer_head *bh = jh2bh(descriptor);
set_buffer_jwrite(bh);
BUFFER_TRACE(bh, "write");
set_buffer_dirty(bh);
- ll_rw_block(SWRITE, 1, &bh);
+ ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
}
#endif
if (err)
jbd2_journal_abort(journal, err);
- jbd2_journal_write_revoke_records(journal, commit_transaction);
+ jbd2_journal_write_revoke_records(journal, commit_transaction,
+ write_op);
jbd_debug(3, "JBD: commit phase 2\n");
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/init.h>
+#include <linux/bio.h>
#endif
#include <linux/log2.h>
#ifdef __KERNEL__
static void write_one_revoke_record(journal_t *, transaction_t *,
struct journal_head **, int *,
- struct jbd2_revoke_record_s *);
-static void flush_descriptor(journal_t *, struct journal_head *, int);
+ struct jbd2_revoke_record_s *, int);
+static void flush_descriptor(journal_t *, struct journal_head *, int, int);
#endif
/* Utility functions to maintain the revoke table */
* revoke hash, deleting the entries as we go.
*/
void jbd2_journal_write_revoke_records(journal_t *journal,
- transaction_t *transaction)
+ transaction_t *transaction,
+ int write_op)
{
struct journal_head *descriptor;
struct jbd2_revoke_record_s *record;
hash_list->next;
write_one_revoke_record(journal, transaction,
&descriptor, &offset,
- record);
+ record, write_op);
count++;
list_del(&record->hash);
kmem_cache_free(jbd2_revoke_record_cache, record);
}
}
if (descriptor)
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
jbd_debug(1, "Wrote %d revoke records\n", count);
}
transaction_t *transaction,
struct journal_head **descriptorp,
int *offsetp,
- struct jbd2_revoke_record_s *record)
+ struct jbd2_revoke_record_s *record,
+ int write_op)
{
struct journal_head *descriptor;
int offset;
/* Make sure we have a descriptor with space left for the record */
if (descriptor) {
if (offset == journal->j_blocksize) {
- flush_descriptor(journal, descriptor, offset);
+ flush_descriptor(journal, descriptor, offset, write_op);
descriptor = NULL;
}
}
static void flush_descriptor(journal_t *journal,
struct journal_head *descriptor,
- int offset)
+ int offset, int write_op)
{
jbd2_journal_revoke_header_t *header;
struct buffer_head *bh = jh2bh(descriptor);
set_buffer_jwrite(bh);
BUFFER_TRACE(bh, "write");
set_buffer_dirty(bh);
- ll_rw_block(SWRITE, 1, &bh);
+ ll_rw_block((write_op == WRITE) ? SWRITE : SWRITE_SYNC_PLUG, 1, &bh);
}
#endif
return 0;
Enomem:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return -ENOMEM;
}
schedule_delayed_work(&grace_period_end, grace_period);
}
+static void restart_grace(void)
+{
+ if (nlmsvc_ops) {
+ cancel_delayed_work_sync(&grace_period_end);
+ locks_end_grace(&lockd_manager);
+ nlmsvc_invalidate_all();
+ set_grace_period();
+ }
+}
+
/*
* This is the lockd kernel thread
*/
if (signalled()) {
flush_signals(current);
- if (nlmsvc_ops) {
- nlmsvc_invalidate_all();
- set_grace_period();
- }
+ restart_grace();
continue;
}
* @nd: pointer to nameidata
* @open_flags: open intent flags
*/
-int path_lookup_open(int dfd, const char *name, unsigned int lookup_flags,
- struct nameidata *nd, int open_flags)
+static int path_lookup_open(int dfd, const char *name,
+ unsigned int lookup_flags, struct nameidata *nd, int open_flags)
{
struct file *filp = get_empty_filp();
int err;
int err;
struct qstr this;
+ WARN_ON_ONCE(!mutex_is_locked(&base->d_inode->i_mutex));
+
err = __lookup_one_len(name, &this, base, len);
if (err)
return ERR_PTR(err);
* open_to_namei_flags() for more details.
*/
struct file *do_filp_open(int dfd, const char *pathname,
- int open_flag, int mode)
+ int open_flag, int mode, int acc_mode)
{
struct file *filp;
struct nameidata nd;
- int acc_mode, error;
+ int error;
struct path path;
struct dentry *dir;
int count = 0;
int will_write;
int flag = open_to_namei_flags(open_flag);
- acc_mode = MAY_OPEN | ACC_MODE(flag);
+ if (!acc_mode)
+ acc_mode = MAY_OPEN | ACC_MODE(flag);
/* O_TRUNC implies we need access checks for write permissions */
if (flag & O_TRUNC)
*/
struct file *filp_open(const char *filename, int flags, int mode)
{
- return do_filp_open(AT_FDCWD, filename, flags, mode);
+ return do_filp_open(AT_FDCWD, filename, flags, mode, 0);
}
EXPORT_SYMBOL(filp_open);
*/
int generic_show_options(struct seq_file *m, struct vfsmount *mnt)
{
- const char *options = mnt->mnt_sb->s_options;
+ const char *options;
+
+ rcu_read_lock();
+ options = rcu_dereference(mnt->mnt_sb->s_options);
if (options != NULL && options[0]) {
seq_putc(m, ',');
mangle(m, options);
}
+ rcu_read_unlock();
return 0;
}
*/
void save_mount_options(struct super_block *sb, char *options)
{
- kfree(sb->s_options);
- sb->s_options = kstrdup(options, GFP_KERNEL);
+ BUG_ON(sb->s_options);
+ rcu_assign_pointer(sb->s_options, kstrdup(options, GFP_KERNEL));
}
EXPORT_SYMBOL(save_mount_options);
+void replace_mount_options(struct super_block *sb, char *options)
+{
+ char *old = sb->s_options;
+ rcu_assign_pointer(sb->s_options, options);
+ if (old) {
+ synchronize_rcu();
+ kfree(old);
+ }
+}
+EXPORT_SYMBOL(replace_mount_options);
+
#ifdef CONFIG_PROC_FS
/* iterator */
static void *m_start(struct seq_file *m, loff_t *pos)
*/
if (flags & MNT_FORCE && sb->s_op->umount_begin) {
- lock_kernel();
sb->s_op->umount_begin(sb);
- unlock_kernel();
}
/*
if (parent_path) {
detach_mnt(source_mnt, parent_path);
attach_mnt(source_mnt, path);
- touch_mnt_namespace(current->nsproxy->mnt_ns);
+ touch_mnt_namespace(parent_path->mnt->mnt_ns);
} else {
mnt_set_mountpoint(dest_mnt, dest_dentry, source_mnt);
commit_tree(source_mnt);
if (data_page)
((char *)data_page)[PAGE_SIZE - 1] = 0;
- /* Default to relatime */
- mnt_flags |= MNT_RELATIME;
+ /* Default to relatime unless overriden */
+ if (!(flags & MS_NOATIME))
+ mnt_flags |= MNT_RELATIME;
/* Separate the per-mountpoint flags */
if (flags & MS_NOSUID)
if (user.object_name_len > NCP_OBJECT_NAME_MAX_LEN)
return -ENOMEM;
if (user.object_name_len) {
- newname = kmalloc(user.object_name_len, GFP_USER);
- if (!newname)
- return -ENOMEM;
- if (copy_from_user(newname, user.object_name, user.object_name_len)) {
- kfree(newname);
- return -EFAULT;
- }
+ newname = memdup_user(user.object_name,
+ user.object_name_len);
+ if (IS_ERR(newname))
+ return PTR_ERR(newname);
} else {
newname = NULL;
}
if (user.len > NCP_PRIVATE_DATA_MAX_LEN)
return -ENOMEM;
if (user.len) {
- new = kmalloc(user.len, GFP_USER);
- if (!new)
- return -ENOMEM;
- if (copy_from_user(new, user.data, user.len)) {
- kfree(new);
- return -EFAULT;
- }
+ new = memdup_user(user.data, user.len);
+ if (IS_ERR(new))
+ return PTR_ERR(new);
} else {
new = NULL;
}
ret = nfs_updatepage(filp, page, 0, pagelen);
out_unlock:
+ if (!ret)
+ return VM_FAULT_LOCKED;
unlock_page(page);
- if (ret)
- ret = VM_FAULT_SIGBUS;
- return ret;
+ return VM_FAULT_SIGBUS;
}
static struct vm_operations_struct nfs_file_vm_ops = {
if (args->npages != 0)
xdr_encode_pages(buf, args->pages, 0, args->len);
else
- req->rq_slen += args->len;
+ req->rq_slen = xdr_adjust_iovec(req->rq_svec,
+ p + XDR_QUADLEN(args->len));
err = nfsacl_encode(buf, base, args->inode,
(args->mask & NFS_ACL) ?
*/
static void nfs_umount_begin(struct super_block *sb)
{
- struct nfs_server *server = NFS_SB(sb);
+ struct nfs_server *server;
struct rpc_clnt *rpc;
+ lock_kernel();
+
+ server = NFS_SB(sb);
/* -EIO all pending I/O */
rpc = server->client_acl;
if (!IS_ERR(rpc))
rpc = server->client;
if (!IS_ERR(rpc))
rpc_killall_tasks(rpc);
+
+ unlock_kernel();
}
/*
error_splat_root:
dput(mntroot);
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto out;
}
return error;
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
dprintk("<-- nfs_xdev_get_sb() = %d [splat]\n", error);
return error;
}
error_splat_root:
dput(mntroot);
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto out;
}
return error;
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
dprintk("<-- nfs4_xdev_get_sb() = %d [splat]\n", error);
return error;
}
return error;
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
dprintk("<-- nfs4_referral_get_sb() = %d [splat]\n", error);
return error;
}
goto out;
status = vfs_readdir(filp, nfsd4_build_namelist, &names);
fput(filp);
+ mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
while (!list_empty(&names)) {
entry = list_entry(names.next, struct name_list, list);
dentry = lookup_one_len(entry->name, dir, HEXDIR_LEN-1);
if (IS_ERR(dentry)) {
status = PTR_ERR(dentry);
- goto out;
+ break;
}
status = f(dir, dentry);
dput(dentry);
if (status)
- goto out;
+ break;
list_del(&entry->list);
kfree(entry);
}
+ mutex_unlock(&dir->d_inode->i_mutex);
out:
while (!list_empty(&names)) {
entry = list_entry(names.next, struct name_list, list);
return status;
}
-static int
-nfsd4_remove_clid_file(struct dentry *dir, struct dentry *dentry)
-{
- int status;
-
- if (!S_ISREG(dir->d_inode->i_mode)) {
- printk("nfsd4: non-file found in client recovery directory\n");
- return -EINVAL;
- }
- mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
- status = vfs_unlink(dir->d_inode, dentry);
- mutex_unlock(&dir->d_inode->i_mutex);
- return status;
-}
-
-static int
-nfsd4_clear_clid_dir(struct dentry *dir, struct dentry *dentry)
-{
- int status;
-
- /* For now this directory should already be empty, but we empty it of
- * any regular files anyway, just in case the directory was created by
- * a kernel from the future.... */
- nfsd4_list_rec_dir(dentry, nfsd4_remove_clid_file);
- mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
- status = vfs_rmdir(dir->d_inode, dentry);
- mutex_unlock(&dir->d_inode->i_mutex);
- return status;
-}
-
static int
nfsd4_unlink_clid_dir(char *name, int namlen)
{
dprintk("NFSD: nfsd4_unlink_clid_dir. name %.*s\n", namlen, name);
- mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
+ mutex_lock_nested(&rec_dir.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
dentry = lookup_one_len(name, rec_dir.dentry, namlen);
- mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
if (IS_ERR(dentry)) {
status = PTR_ERR(dentry);
- return status;
+ goto out_unlock;
}
status = -ENOENT;
if (!dentry->d_inode)
goto out;
-
- status = nfsd4_clear_clid_dir(rec_dir.dentry, dentry);
+ status = vfs_rmdir(rec_dir.dentry->d_inode, dentry);
out:
dput(dentry);
+out_unlock:
+ mutex_unlock(&rec_dir.dentry->d_inode->i_mutex);
return status;
}
if (nfs4_has_reclaimed_state(child->d_name.name, false))
return 0;
- status = nfsd4_clear_clid_dir(parent, child);
+ status = vfs_rmdir(parent->d_inode, child);
if (status)
printk("failed to remove client recovery directory %s\n",
child->d_name.name);
struct nfsd4_cache_entry *e = &ses->se_slots[i].sl_cache_entry;
nfsd4_release_respages(e->ce_respages, e->ce_resused);
}
- kfree(ses->se_slots);
kfree(ses);
}
dentry = lookup_one_len(name, cd->rd_fhp->fh_dentry, namlen);
if (IS_ERR(dentry))
return nfserrno(PTR_ERR(dentry));
+ if (!dentry->d_inode) {
+ /*
+ * nfsd_buffered_readdir drops the i_mutex between
+ * readdir and calling this callback, leaving a window
+ * where this directory entry could have gone away.
+ */
+ dput(dentry);
+ return nfserr_noent;
+ }
exp_get(exp);
/*
struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common);
int buflen;
__be32 *p = cd->buffer;
+ __be32 *cookiep;
__be32 nfserr = nfserr_toosmall;
/* In nfsv4, "." and ".." never make it onto the wire.. */
goto fail;
*p++ = xdr_one; /* mark entry present */
- cd->offset = p; /* remember pointer */
+ cookiep = p;
p = xdr_encode_hyper(p, NFS_OFFSET_MAX); /* offset of next entry */
p = xdr_encode_array(p, name, namlen); /* name length & name */
goto fail;
case nfserr_dropit:
goto fail;
+ case nfserr_noent:
+ goto skip_entry;
default:
/*
* If the client requested the RDATTR_ERROR attribute,
}
cd->buflen -= (p - cd->buffer);
cd->buffer = p;
+ cd->offset = cookiep;
+skip_entry:
cd->common.err = nfs_ok;
return 0;
fail:
}
if ((exp->ex_flags & NFSEXP_CROSSMOUNT) || EX_NOHIDE(exp2)) {
/* successfully crossed mount point */
- exp_put(exp);
- *expp = exp2;
+ /*
+ * This is subtle: dentry is *not* under mnt at this point.
+ * The only reason we are safe is that original mnt is pinned
+ * down by exp, so we should dput before putting exp.
+ */
dput(dentry);
*dpp = mounts;
+ exp_put(exp);
+ *expp = exp2;
} else {
exp_put(exp2);
dput(mounts);
return 0;
}
-static int nfsd_buffered_readdir(struct file *file, filldir_t func,
- struct readdir_cd *cdp, loff_t *offsetp)
+static __be32 nfsd_buffered_readdir(struct file *file, filldir_t func,
+ struct readdir_cd *cdp, loff_t *offsetp)
{
struct readdir_data buf;
struct buffered_dirent *de;
buf.dirent = (void *)__get_free_page(GFP_KERNEL);
if (!buf.dirent)
- return -ENOMEM;
+ return nfserrno(-ENOMEM);
offset = *offsetp;
while (1) {
+ struct inode *dir_inode = file->f_path.dentry->d_inode;
unsigned int reclen;
cdp->err = nfserr_eof; /* will be cleared on successful read */
if (!size)
break;
+ /*
+ * Various filldir functions may end up calling back into
+ * lookup_one_len() and the file system's ->lookup() method.
+ * These expect i_mutex to be held, as it would within readdir.
+ */
+ host_err = mutex_lock_killable(&dir_inode->i_mutex);
+ if (host_err)
+ break;
+
de = (struct buffered_dirent *)buf.dirent;
while (size > 0) {
offset = de->offset;
if (func(cdp, de->name, de->namlen, de->offset,
de->ino, de->d_type))
- goto done;
+ break;
if (cdp->err != nfs_ok)
- goto done;
+ break;
reclen = ALIGN(sizeof(*de) + de->namlen,
sizeof(u64));
size -= reclen;
de = (struct buffered_dirent *)((char *)de + reclen);
}
+ mutex_unlock(&dir_inode->i_mutex);
+ if (size > 0) /* We bailed out early */
+ break;
+
offset = vfs_llseek(file, 0, SEEK_CUR);
}
- done:
free_page((unsigned long)(buf.dirent));
if (host_err)
.bpop_translate = NULL,
};
+static struct lock_class_key nilfs_bmap_dat_lock_key;
+
/**
* nilfs_bmap_read - read a bmap from an inode
* @bmap: bmap
bmap->b_pops = &nilfs_bmap_ptr_ops_p;
bmap->b_last_allocated_key = 0; /* XXX: use macro */
bmap->b_last_allocated_ptr = NILFS_BMAP_NEW_PTR_INIT;
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
break;
case NILFS_CPFILE_INO:
case NILFS_SUFILE_INO:
{
memcpy(gcbmap, bmap, sizeof(union nilfs_bmap_union));
init_rwsem(&gcbmap->b_sem);
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
gcbmap->b_inode = &NILFS_BMAP_I(gcbmap)->vfs_inode;
}
{
memcpy(bmap, gcbmap, sizeof(union nilfs_bmap_union));
init_rwsem(&bmap->b_sem);
+ lockdep_set_class(&bmap->b_sem, &nilfs_bmap_dat_lock_key);
bmap->b_inode = &NILFS_BMAP_I(bmap)->vfs_inode;
}
#include <linux/smp_lock.h> /* lock_kernel(), unlock_kernel() */
#include <linux/capability.h> /* capable() */
#include <linux/uaccess.h> /* copy_from_user(), copy_to_user() */
+#include <linux/vmalloc.h>
#include <linux/nilfs2_fs.h>
#include "nilfs.h"
#include "segment.h"
nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
void *buf, size_t size, size_t nmembs)
{
- return nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
- nmembs);
-}
-
-static int nilfs_ioctl_get_cpinfo(struct inode *inode, struct file *filp,
- unsigned int cmd, void __user *argp)
-{
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
- struct nilfs_argv argv;
int ret;
- if (copy_from_user(&argv, argp, sizeof(argv)))
- return -EFAULT;
-
down_read(&nilfs->ns_segctor_sem);
- ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
- nilfs_ioctl_do_get_cpinfo);
+ ret = nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
+ nmembs);
up_read(&nilfs->ns_segctor_sem);
- if (ret < 0)
- return ret;
-
- if (copy_to_user(argp, &argv, sizeof(argv)))
- ret = -EFAULT;
return ret;
}
nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
void *buf, size_t size, size_t nmembs)
{
- return nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
-}
-
-static int nilfs_ioctl_get_suinfo(struct inode *inode, struct file *filp,
- unsigned int cmd, void __user *argp)
-{
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
- struct nilfs_argv argv;
int ret;
- if (copy_from_user(&argv, argp, sizeof(argv)))
- return -EFAULT;
-
down_read(&nilfs->ns_segctor_sem);
- ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
- nilfs_ioctl_do_get_suinfo);
+ ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
up_read(&nilfs->ns_segctor_sem);
- if (ret < 0)
- return ret;
-
- if (copy_to_user(argp, &argv, sizeof(argv)))
- ret = -EFAULT;
return ret;
}
nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
void *buf, size_t size, size_t nmembs)
{
- return nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
-}
-
-static int nilfs_ioctl_get_vinfo(struct inode *inode, struct file *filp,
- unsigned int cmd, void __user *argp)
-{
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
- struct nilfs_argv argv;
int ret;
- if (copy_from_user(&argv, argp, sizeof(argv)))
- return -EFAULT;
-
down_read(&nilfs->ns_segctor_sem);
- ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
- nilfs_ioctl_do_get_vinfo);
+ ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
up_read(&nilfs->ns_segctor_sem);
- if (ret < 0)
- return ret;
-
- if (copy_to_user(argp, &argv, sizeof(argv)))
- ret = -EFAULT;
return ret;
}
struct nilfs_bdesc *bdescs = buf;
int ret, i;
+ down_read(&nilfs->ns_segctor_sem);
for (i = 0; i < nmembs; i++) {
ret = nilfs_bmap_lookup_at_level(bmap,
bdescs[i].bd_offset,
bdescs[i].bd_level + 1,
&bdescs[i].bd_blocknr);
if (ret < 0) {
- if (ret != -ENOENT)
+ if (ret != -ENOENT) {
+ up_read(&nilfs->ns_segctor_sem);
return ret;
+ }
bdescs[i].bd_blocknr = 0;
}
}
+ up_read(&nilfs->ns_segctor_sem);
return nmembs;
}
if (copy_from_user(&argv, argp, sizeof(argv)))
return -EFAULT;
- down_read(&nilfs->ns_segctor_sem);
+ if (argv.v_size != sizeof(struct nilfs_bdesc))
+ return -EINVAL;
+
ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
nilfs_ioctl_do_get_bdescs);
- up_read(&nilfs->ns_segctor_sem);
if (ret < 0)
return ret;
return 0;
}
-static ssize_t
-nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags,
- void *buf, size_t size, size_t nmembs)
+static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
+ size_t nmembs = argv->v_nmembs;
struct inode *inode;
struct nilfs_vdesc *vdesc;
struct buffer_head *bh, *n;
return ret;
}
-static inline int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
-{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_move_blocks);
-}
-
-static ssize_t
-nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp,
- int flags, void *buf, size_t size,
- size_t nmembs)
+static int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
+ size_t nmembs = argv->v_nmembs;
struct inode *cpfile = nilfs->ns_cpfile;
struct nilfs_period *periods = buf;
int ret, i;
return nmembs;
}
-static inline int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
+static int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_delete_checkpoints);
-}
+ size_t nmembs = argv->v_nmembs;
+ int ret;
-static ssize_t
-nilfs_ioctl_do_free_vblocknrs(struct the_nilfs *nilfs, __u64 *posp, int flags,
- void *buf, size_t size, size_t nmembs)
-{
- int ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
+ ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
return (ret < 0) ? ret : nmembs;
}
-static inline int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
-{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_free_vblocknrs);
-}
-
-static ssize_t
-nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp,
- int flags, void *buf, size_t size,
- size_t nmembs)
+static int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
+ size_t nmembs = argv->v_nmembs;
struct inode *dat = nilfs_dat_inode(nilfs);
struct nilfs_bmap *bmap = NILFS_I(dat)->i_bmap;
struct nilfs_bdesc *bdescs = buf;
return nmembs;
}
-static inline int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
+static int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_mark_blocks_dirty);
-}
-
-static ssize_t
-nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags,
- void *buf, size_t size, size_t nmembs)
-{
- struct nilfs_sb_info *sbi = nilfs_get_writer(nilfs);
+ size_t nmembs = argv->v_nmembs;
+ struct nilfs_sb_info *sbi = nilfs->ns_writer;
int ret;
- if (unlikely(!sbi))
+ if (unlikely(!sbi)) {
+ /* never happens because called for a writable mount */
+ WARN_ON(1);
return -EROFS;
+ }
ret = nilfs_segctor_add_segments_to_be_freed(
NILFS_SC(sbi), buf, nmembs);
- nilfs_put_writer(nilfs);
return (ret < 0) ? ret : nmembs;
}
-static inline int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
-{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_free_segments);
-}
-
int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
- void __user *argp)
+ struct nilfs_argv *argv, void **kbufs)
{
- struct nilfs_argv argv[5];
const char *msg;
- int dir, ret;
-
- if (copy_from_user(argv, argp, sizeof(argv)))
- return -EFAULT;
+ int ret;
- dir = _IOC_WRITE;
- ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], dir);
+ ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], kbufs[0]);
if (ret < 0) {
msg = "cannot read source blocks";
goto failed;
}
- ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], dir);
+
+ ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], kbufs[1]);
if (ret < 0) {
/*
* can safely abort because checkpoints can be removed
msg = "cannot delete checkpoints";
goto failed;
}
- ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], dir);
+ ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], kbufs[2]);
if (ret < 0) {
/*
* can safely abort because DAT file is updated atomically
msg = "cannot delete virtual blocks from DAT file";
goto failed;
}
- ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], dir);
+ ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], kbufs[3]);
if (ret < 0) {
/*
* can safely abort because the operation is nondestructive.
msg = "cannot mark copying blocks dirty";
goto failed;
}
- ret = nilfs_ioctl_free_segments(nilfs, &argv[4], dir);
+ ret = nilfs_ioctl_free_segments(nilfs, &argv[4], kbufs[4]);
if (ret < 0) {
/*
* can safely abort because this operation is atomic.
static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp,
unsigned int cmd, void __user *argp)
{
+ struct nilfs_argv argv[5];
+ const static size_t argsz[5] = {
+ sizeof(struct nilfs_vdesc),
+ sizeof(struct nilfs_period),
+ sizeof(__u64),
+ sizeof(struct nilfs_bdesc),
+ sizeof(__u64),
+ };
+ void __user *base;
+ void *kbufs[5];
+ struct the_nilfs *nilfs;
+ size_t len, nsegs;
+ int n, ret;
+
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- return nilfs_clean_segments(inode->i_sb, argp);
+
+ if (copy_from_user(argv, argp, sizeof(argv)))
+ return -EFAULT;
+
+ nsegs = argv[4].v_nmembs;
+ if (argv[4].v_size != argsz[4])
+ return -EINVAL;
+ /*
+ * argv[4] points to segment numbers this ioctl cleans. We
+ * use kmalloc() for its buffer because memory used for the
+ * segment numbers is enough small.
+ */
+ kbufs[4] = memdup_user((void __user *)(unsigned long)argv[4].v_base,
+ nsegs * sizeof(__u64));
+ if (IS_ERR(kbufs[4]))
+ return PTR_ERR(kbufs[4]);
+
+ nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+
+ for (n = 0; n < 4; n++) {
+ ret = -EINVAL;
+ if (argv[n].v_size != argsz[n])
+ goto out_free;
+
+ if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment)
+ goto out_free;
+
+ len = argv[n].v_size * argv[n].v_nmembs;
+ base = (void __user *)(unsigned long)argv[n].v_base;
+ if (len == 0) {
+ kbufs[n] = NULL;
+ continue;
+ }
+
+ kbufs[n] = vmalloc(len);
+ if (!kbufs[n]) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+ if (copy_from_user(kbufs[n], base, len)) {
+ ret = -EFAULT;
+ vfree(kbufs[n]);
+ goto out_free;
+ }
+ }
+
+ ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
+
+ out_free:
+ while (--n > 0)
+ vfree(kbufs[n]);
+ kfree(kbufs[4]);
+ return ret;
}
static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
return 0;
}
+static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
+ unsigned int cmd, void __user *argp,
+ size_t membsz,
+ ssize_t (*dofunc)(struct the_nilfs *,
+ __u64 *, int,
+ void *, size_t, size_t))
+
+{
+ struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+ struct nilfs_argv argv;
+ int ret;
+
+ if (copy_from_user(&argv, argp, sizeof(argv)))
+ return -EFAULT;
+
+ if (argv.v_size != membsz)
+ return -EINVAL;
+
+ ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc);
+ if (ret < 0)
+ return ret;
+
+ if (copy_to_user(argp, &argv, sizeof(argv)))
+ ret = -EFAULT;
+ return ret;
+}
+
long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = filp->f_dentry->d_inode;
case NILFS_IOCTL_DELETE_CHECKPOINT:
return nilfs_ioctl_delete_checkpoint(inode, filp, cmd, argp);
case NILFS_IOCTL_GET_CPINFO:
- return nilfs_ioctl_get_cpinfo(inode, filp, cmd, argp);
+ return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+ sizeof(struct nilfs_cpinfo),
+ nilfs_ioctl_do_get_cpinfo);
case NILFS_IOCTL_GET_CPSTAT:
return nilfs_ioctl_get_cpstat(inode, filp, cmd, argp);
case NILFS_IOCTL_GET_SUINFO:
- return nilfs_ioctl_get_suinfo(inode, filp, cmd, argp);
+ return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+ sizeof(struct nilfs_suinfo),
+ nilfs_ioctl_do_get_suinfo);
case NILFS_IOCTL_GET_SUSTAT:
return nilfs_ioctl_get_sustat(inode, filp, cmd, argp);
case NILFS_IOCTL_GET_VINFO:
- /* XXX: rename to ??? */
- return nilfs_ioctl_get_vinfo(inode, filp, cmd, argp);
+ return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+ sizeof(struct nilfs_vinfo),
+ nilfs_ioctl_do_get_vinfo);
case NILFS_IOCTL_GET_BDESCS:
return nilfs_ioctl_get_bdescs(inode, filp, cmd, argp);
case NILFS_IOCTL_CLEAN_SEGMENTS:
void *))
{
struct the_nilfs *nilfs = NILFS_MDT(inode)->mi_nilfs;
- struct nilfs_sb_info *writer = NULL;
struct super_block *sb = inode->i_sb;
struct nilfs_transaction_info ti;
struct buffer_head *bh;
int err;
if (!sb) {
- writer = nilfs_get_writer(nilfs);
- if (!writer) {
+ /*
+ * Make sure this function is not called from any
+ * read-only context.
+ */
+ if (!nilfs->ns_writer) {
+ WARN_ON(1);
err = -EROFS;
goto out;
}
- sb = writer->s_super;
+ sb = nilfs->ns_writer->s_super;
}
nilfs_transaction_begin(sb, &ti, 0);
err = nilfs_transaction_commit(sb);
else
nilfs_transaction_abort(sb);
- if (writer)
- nilfs_put_writer(nilfs);
out:
return err;
}
int err;
err = nilfs_bmap_delete(ii->i_bmap, block);
- if (likely(!err)) {
+ if (!err || err == -ENOENT) {
nilfs_mdt_mark_dirty(inode);
nilfs_mdt_forget_block(inode, block);
}
#include "bmap.h"
#include "bmap_union.h"
-/*
- * NILFS filesystem version
- */
-#define NILFS_VERSION "2.0.5"
-
/*
* nilfs inode data in memory
*/
/* ioctl.c */
long nilfs_ioctl(struct file *, unsigned int, unsigned long);
-int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, void __user *);
+int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, struct nilfs_argv *,
+ void **);
/* inode.c */
extern struct inode *nilfs_new_inode(struct inode *, int);
lock_buffer(bh);
clear_buffer_nilfs_volatile(bh);
- if (test_clear_buffer_dirty(bh) && nilfs_page_buffers_clean(page))
+ clear_buffer_dirty(bh);
+ if (nilfs_page_buffers_clean(page))
__nilfs_clear_page_dirty(page);
clear_buffer_uptodate(bh);
}
static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
+ struct nilfs_sb_info *sbi,
struct nilfs_recovery_info *ri)
{
struct list_head *head = &ri->ri_used_segments;
struct nilfs_segment_entry *ent, *n;
struct inode *sufile = nilfs->ns_sufile;
__u64 segnum[4];
- time_t mtime;
int err;
int i;
segnum[2] = ri->ri_segnum;
segnum[3] = ri->ri_nextnum;
+ nilfs_attach_writer(nilfs, sbi);
/*
* Releasing the next segment of the latest super root.
* The next segment is invalidated by this recovery.
* Collecting segments written after the latest super root.
* These are marked dirty to avoid being reallocated in the next write.
*/
- mtime = get_seconds();
list_for_each_entry_safe(ent, n, head, list) {
- if (ent->segnum == segnum[0]) {
- list_del(&ent->list);
- nilfs_free_segment_entry(ent);
- continue;
- }
- err = nilfs_open_segment_entry(ent, sufile);
- if (unlikely(err))
- goto failed;
- if (!nilfs_segment_usage_dirty(ent->raw_su)) {
- /* make the segment garbage */
- ent->raw_su->su_nblocks = cpu_to_le32(0);
- ent->raw_su->su_lastmod = cpu_to_le32(mtime);
- nilfs_segment_usage_set_dirty(ent->raw_su);
+ if (ent->segnum != segnum[0]) {
+ err = nilfs_sufile_scrap(sufile, ent->segnum);
+ if (unlikely(err))
+ goto failed;
}
list_del(&ent->list);
- nilfs_close_segment_entry(ent, sufile);
nilfs_free_segment_entry(ent);
}
nilfs->ns_pseg_offset = 0;
nilfs->ns_seg_seq = ri->ri_seq + 2;
nilfs->ns_nextnum = nilfs->ns_segnum = segnum[0];
- return 0;
failed:
/* No need to recover sufile because it will be destroyed on error */
+ nilfs_detach_writer(nilfs, sbi);
return err;
}
goto failed;
if (ri->ri_need_recovery == NILFS_RECOVERY_ROLLFORWARD_DONE) {
- err = nilfs_prepare_segment_for_recovery(nilfs, ri);
+ err = nilfs_prepare_segment_for_recovery(nilfs, sbi, ri);
if (unlikely(err)) {
printk(KERN_ERR "NILFS: Error preparing segments for "
"recovery.\n");
}
}
-int nilfs_clean_segments(struct super_block *sb, void __user *argp)
+int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv,
+ void **kbufs)
{
struct nilfs_sb_info *sbi = NILFS_SB(sb);
struct nilfs_sc_info *sci = NILFS_SC(sbi);
err = nilfs_init_gcdat_inode(nilfs);
if (unlikely(err))
goto out_unlock;
- err = nilfs_ioctl_prepare_clean_segments(nilfs, argp);
+ err = nilfs_ioctl_prepare_clean_segments(nilfs, argv, kbufs);
if (unlikely(err))
goto out_unlock;
extern int nilfs_construct_dsync_segment(struct super_block *, struct inode *,
loff_t, loff_t);
extern void nilfs_flush_segment(struct super_block *, ino_t);
-extern int nilfs_clean_segments(struct super_block *, void __user *);
+extern int nilfs_clean_segments(struct super_block *, struct nilfs_argv *,
+ void **);
extern int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *,
__u64 *, size_t);
create, NULL, bhp);
}
+static void nilfs_sufile_mod_counter(struct buffer_head *header_bh,
+ u64 ncleanadd, u64 ndirtyadd)
+{
+ struct nilfs_sufile_header *header;
+ void *kaddr;
+
+ kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
+ header = kaddr + bh_offset(header_bh);
+ le64_add_cpu(&header->sh_ncleansegs, ncleanadd);
+ le64_add_cpu(&header->sh_ndirtysegs, ndirtyadd);
+ kunmap_atomic(kaddr, KM_USER0);
+
+ nilfs_mdt_mark_buffer_dirty(header_bh);
+}
+
+int nilfs_sufile_update(struct inode *sufile, __u64 segnum, int create,
+ void (*dofunc)(struct inode *, __u64,
+ struct buffer_head *,
+ struct buffer_head *))
+{
+ struct buffer_head *header_bh, *bh;
+ int ret;
+
+ if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
+ printk(KERN_WARNING "%s: invalid segment number: %llu\n",
+ __func__, (unsigned long long)segnum);
+ return -EINVAL;
+ }
+ down_write(&NILFS_MDT(sufile)->mi_sem);
+
+ ret = nilfs_sufile_get_header_block(sufile, &header_bh);
+ if (ret < 0)
+ goto out_sem;
+
+ ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, create, &bh);
+ if (!ret) {
+ dofunc(sufile, segnum, header_bh, bh);
+ brelse(bh);
+ }
+ brelse(header_bh);
+
+ out_sem:
+ up_write(&NILFS_MDT(sufile)->mi_sem);
+ return ret;
+}
+
/**
* nilfs_sufile_alloc - allocate a segment
* @sufile: inode of segment usage file
int nilfs_sufile_alloc(struct inode *sufile, __u64 *segnump)
{
struct buffer_head *header_bh, *su_bh;
- struct the_nilfs *nilfs;
struct nilfs_sufile_header *header;
struct nilfs_segment_usage *su;
size_t susz = NILFS_MDT(sufile)->mi_entry_size;
down_write(&NILFS_MDT(sufile)->mi_sem);
- nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
ret = nilfs_sufile_get_header_block(sufile, &header_bh);
if (ret < 0)
goto out_sem;
return ret;
}
-/**
- * nilfs_sufile_cancel_free -
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description:
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
+void nilfs_sufile_do_cancel_free(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- struct buffer_head *header_bh, *su_bh;
- struct the_nilfs *nilfs;
- struct nilfs_sufile_header *header;
struct nilfs_segment_usage *su;
void *kaddr;
- int ret;
-
- down_write(&NILFS_MDT(sufile)->mi_sem);
-
- nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
- ret = nilfs_sufile_get_header_block(sufile, &header_bh);
- if (ret < 0)
- goto out_sem;
-
- ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh);
- if (ret < 0)
- goto out_header;
kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
- su = nilfs_sufile_block_get_segment_usage(
- sufile, segnum, su_bh, kaddr);
+ su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
if (unlikely(!nilfs_segment_usage_clean(su))) {
printk(KERN_WARNING "%s: segment %llu must be clean\n",
__func__, (unsigned long long)segnum);
kunmap_atomic(kaddr, KM_USER0);
- goto out_su_bh;
+ return;
}
nilfs_segment_usage_set_dirty(su);
kunmap_atomic(kaddr, KM_USER0);
- kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
- header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
- le64_add_cpu(&header->sh_ncleansegs, -1);
- le64_add_cpu(&header->sh_ndirtysegs, 1);
- kunmap_atomic(kaddr, KM_USER0);
-
- nilfs_mdt_mark_buffer_dirty(header_bh);
+ nilfs_sufile_mod_counter(header_bh, -1, 1);
nilfs_mdt_mark_buffer_dirty(su_bh);
nilfs_mdt_mark_dirty(sufile);
-
- out_su_bh:
- brelse(su_bh);
- out_header:
- brelse(header_bh);
- out_sem:
- up_write(&NILFS_MDT(sufile)->mi_sem);
- return ret;
}
-/**
- * nilfs_sufile_freev - free segments
- * @sufile: inode of segment usage file
- * @segnum: array of segment numbers
- * @nsegs: number of segments
- *
- * Description: nilfs_sufile_freev() frees segments specified by @segnum and
- * @nsegs, which must have been returned by a previous call to
- * nilfs_sufile_alloc().
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- */
-#define NILFS_SUFILE_FREEV_PREALLOC 16
-int nilfs_sufile_freev(struct inode *sufile, __u64 *segnum, size_t nsegs)
+void nilfs_sufile_do_scrap(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- struct buffer_head *header_bh, **su_bh,
- *su_bh_prealloc[NILFS_SUFILE_FREEV_PREALLOC];
- struct the_nilfs *nilfs;
- struct nilfs_sufile_header *header;
struct nilfs_segment_usage *su;
void *kaddr;
- int ret, i;
+ int clean, dirty;
- down_write(&NILFS_MDT(sufile)->mi_sem);
-
- nilfs = NILFS_MDT(sufile)->mi_nilfs;
-
- /* prepare resources */
- if (nsegs <= NILFS_SUFILE_FREEV_PREALLOC)
- su_bh = su_bh_prealloc;
- else {
- su_bh = kmalloc(sizeof(*su_bh) * nsegs, GFP_NOFS);
- if (su_bh == NULL) {
- ret = -ENOMEM;
- goto out_sem;
- }
- }
-
- ret = nilfs_sufile_get_header_block(sufile, &header_bh);
- if (ret < 0)
- goto out_su_bh;
- for (i = 0; i < nsegs; i++) {
- ret = nilfs_sufile_get_segment_usage_block(sufile, segnum[i],
- 0, &su_bh[i]);
- if (ret < 0)
- goto out_bh;
- }
-
- /* free segments */
- for (i = 0; i < nsegs; i++) {
- kaddr = kmap_atomic(su_bh[i]->b_page, KM_USER0);
- su = nilfs_sufile_block_get_segment_usage(
- sufile, segnum[i], su_bh[i], kaddr);
- WARN_ON(nilfs_segment_usage_error(su));
- nilfs_segment_usage_set_clean(su);
+ kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
+ su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
+ if (su->su_flags == cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY) &&
+ su->su_nblocks == cpu_to_le32(0)) {
kunmap_atomic(kaddr, KM_USER0);
- nilfs_mdt_mark_buffer_dirty(su_bh[i]);
+ return;
}
- kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
- header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
- le64_add_cpu(&header->sh_ncleansegs, nsegs);
- le64_add_cpu(&header->sh_ndirtysegs, -(u64)nsegs);
+ clean = nilfs_segment_usage_clean(su);
+ dirty = nilfs_segment_usage_dirty(su);
+
+ /* make the segment garbage */
+ su->su_lastmod = cpu_to_le64(0);
+ su->su_nblocks = cpu_to_le32(0);
+ su->su_flags = cpu_to_le32(1UL << NILFS_SEGMENT_USAGE_DIRTY);
kunmap_atomic(kaddr, KM_USER0);
- nilfs_mdt_mark_buffer_dirty(header_bh);
+
+ nilfs_sufile_mod_counter(header_bh, clean ? (u64)-1 : 0, dirty ? 0 : 1);
+ nilfs_mdt_mark_buffer_dirty(su_bh);
nilfs_mdt_mark_dirty(sufile);
+}
- out_bh:
- for (i--; i >= 0; i--)
- brelse(su_bh[i]);
- brelse(header_bh);
+void nilfs_sufile_do_free(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
+{
+ struct nilfs_segment_usage *su;
+ void *kaddr;
+ int sudirty;
- out_su_bh:
- if (su_bh != su_bh_prealloc)
- kfree(su_bh);
+ kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
+ su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
+ if (nilfs_segment_usage_clean(su)) {
+ printk(KERN_WARNING "%s: segment %llu is already clean\n",
+ __func__, (unsigned long long)segnum);
+ kunmap_atomic(kaddr, KM_USER0);
+ return;
+ }
+ WARN_ON(nilfs_segment_usage_error(su));
+ WARN_ON(!nilfs_segment_usage_dirty(su));
- out_sem:
- up_write(&NILFS_MDT(sufile)->mi_sem);
- return ret;
-}
+ sudirty = nilfs_segment_usage_dirty(su);
+ nilfs_segment_usage_set_clean(su);
+ kunmap_atomic(kaddr, KM_USER0);
+ nilfs_mdt_mark_buffer_dirty(su_bh);
-/**
- * nilfs_sufile_free -
- * @sufile:
- * @segnum:
- */
-int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
-{
- return nilfs_sufile_freev(sufile, &segnum, 1);
+ nilfs_sufile_mod_counter(header_bh, 1, sudirty ? (u64)-1 : 0);
+ nilfs_mdt_mark_dirty(sufile);
}
/**
return ret;
}
-/**
- * nilfs_sufile_set_error - mark a segment as erroneous
- * @sufile: inode of segment usage file
- * @segnum: segment number
- *
- * Description: nilfs_sufile_set_error() marks the segment specified by
- * @segnum as erroneous. The error segment will never be used again.
- *
- * Return Value: On success, 0 is returned. On error, one of the following
- * negative error codes is returned.
- *
- * %-EIO - I/O error.
- *
- * %-ENOMEM - Insufficient amount of memory available.
- *
- * %-EINVAL - Invalid segment usage number.
- */
-int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
+void nilfs_sufile_do_set_error(struct inode *sufile, __u64 segnum,
+ struct buffer_head *header_bh,
+ struct buffer_head *su_bh)
{
- struct buffer_head *header_bh, *su_bh;
struct nilfs_segment_usage *su;
- struct nilfs_sufile_header *header;
void *kaddr;
- int ret;
-
- if (unlikely(segnum >= nilfs_sufile_get_nsegments(sufile))) {
- printk(KERN_WARNING "%s: invalid segment number: %llu\n",
- __func__, (unsigned long long)segnum);
- return -EINVAL;
- }
- down_write(&NILFS_MDT(sufile)->mi_sem);
-
- ret = nilfs_sufile_get_header_block(sufile, &header_bh);
- if (ret < 0)
- goto out_sem;
- ret = nilfs_sufile_get_segment_usage_block(sufile, segnum, 0, &su_bh);
- if (ret < 0)
- goto out_header;
+ int suclean;
kaddr = kmap_atomic(su_bh->b_page, KM_USER0);
su = nilfs_sufile_block_get_segment_usage(sufile, segnum, su_bh, kaddr);
if (nilfs_segment_usage_error(su)) {
kunmap_atomic(kaddr, KM_USER0);
- brelse(su_bh);
- goto out_header;
+ return;
}
-
+ suclean = nilfs_segment_usage_clean(su);
nilfs_segment_usage_set_error(su);
kunmap_atomic(kaddr, KM_USER0);
- brelse(su_bh);
- kaddr = kmap_atomic(header_bh->b_page, KM_USER0);
- header = nilfs_sufile_block_get_header(sufile, header_bh, kaddr);
- le64_add_cpu(&header->sh_ndirtysegs, -1);
- kunmap_atomic(kaddr, KM_USER0);
- nilfs_mdt_mark_buffer_dirty(header_bh);
+ if (suclean)
+ nilfs_sufile_mod_counter(header_bh, -1, 0);
nilfs_mdt_mark_buffer_dirty(su_bh);
nilfs_mdt_mark_dirty(sufile);
- brelse(su_bh);
-
- out_header:
- brelse(header_bh);
-
- out_sem:
- up_write(&NILFS_MDT(sufile)->mi_sem);
- return ret;
}
/**
si[i + j].sui_nblocks = le32_to_cpu(su->su_nblocks);
si[i + j].sui_flags = le32_to_cpu(su->su_flags) &
~(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
- if (nilfs_segment_is_active(nilfs, segnum + i + j))
+ if (nilfs_segment_is_active(nilfs, segnum + j))
si[i + j].sui_flags |=
(1UL << NILFS_SEGMENT_USAGE_ACTIVE);
}
}
int nilfs_sufile_alloc(struct inode *, __u64 *);
-int nilfs_sufile_cancel_free(struct inode *, __u64);
-int nilfs_sufile_freev(struct inode *, __u64 *, size_t);
-int nilfs_sufile_free(struct inode *, __u64);
int nilfs_sufile_get_segment_usage(struct inode *, __u64,
struct nilfs_segment_usage **,
struct buffer_head **);
struct buffer_head *);
int nilfs_sufile_get_stat(struct inode *, struct nilfs_sustat *);
int nilfs_sufile_get_ncleansegs(struct inode *, unsigned long *);
-int nilfs_sufile_set_error(struct inode *, __u64);
ssize_t nilfs_sufile_get_suinfo(struct inode *, __u64, struct nilfs_suinfo *,
size_t);
+int nilfs_sufile_update(struct inode *, __u64, int,
+ void (*dofunc)(struct inode *, __u64,
+ struct buffer_head *,
+ struct buffer_head *));
+void nilfs_sufile_do_cancel_free(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+void nilfs_sufile_do_scrap(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+void nilfs_sufile_do_free(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+void nilfs_sufile_do_set_error(struct inode *, __u64, struct buffer_head *,
+ struct buffer_head *);
+
+/**
+ * nilfs_sufile_cancel_free -
+ * @sufile: inode of segment usage file
+ * @segnum: segment number
+ *
+ * Description:
+ *
+ * Return Value: On success, 0 is returned. On error, one of the following
+ * negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ */
+static inline int nilfs_sufile_cancel_free(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 0,
+ nilfs_sufile_do_cancel_free);
+}
+
+/**
+ * nilfs_sufile_scrap - make a segment garbage
+ * @sufile: inode of segment usage file
+ * @segnum: segment number to be freed
+ */
+static inline int nilfs_sufile_scrap(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 1, nilfs_sufile_do_scrap);
+}
+
+/**
+ * nilfs_sufile_free - free segment
+ * @sufile: inode of segment usage file
+ * @segnum: segment number to be freed
+ */
+static inline int nilfs_sufile_free(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 0, nilfs_sufile_do_free);
+}
+
+/**
+ * nilfs_sufile_set_error - mark a segment as erroneous
+ * @sufile: inode of segment usage file
+ * @segnum: segment number
+ *
+ * Description: nilfs_sufile_set_error() marks the segment specified by
+ * @segnum as erroneous. The error segment will never be used again.
+ *
+ * Return Value: On success, 0 is returned. On error, one of the following
+ * negative error codes is returned.
+ *
+ * %-EIO - I/O error.
+ *
+ * %-ENOMEM - Insufficient amount of memory available.
+ *
+ * %-EINVAL - Invalid segment usage number.
+ */
+static inline int nilfs_sufile_set_error(struct inode *sufile, __u64 segnum)
+{
+ return nilfs_sufile_update(sufile, segnum, 0,
+ nilfs_sufile_do_set_error);
+}
#endif /* _NILFS_SUFILE_H */
MODULE_AUTHOR("NTT Corp.");
MODULE_DESCRIPTION("A New Implementation of the Log-structured Filesystem "
"(NILFS)");
-MODULE_VERSION(NILFS_VERSION);
MODULE_LICENSE("GPL");
static int nilfs_remount(struct super_block *sb, int *flags, char *data);
{
struct super_block *sb = dentry->d_sb;
struct nilfs_sb_info *sbi = NILFS_SB(sb);
+ struct the_nilfs *nilfs = sbi->s_nilfs;
+ u64 id = huge_encode_dev(sb->s_bdev->bd_dev);
unsigned long long blocks;
unsigned long overhead;
unsigned long nrsvblocks;
sector_t nfreeblocks;
- struct the_nilfs *nilfs = sbi->s_nilfs;
int err;
/*
buf->f_files = atomic_read(&sbi->s_inodes_count);
buf->f_ffree = 0; /* nilfs_count_free_inodes(sb); */
buf->f_namelen = NILFS_NAME_LEN;
+ buf->f_fsid.val[0] = (u32)id;
+ buf->f_fsid.val[1] = (u32)(id >> 32);
+
return 0;
}
static int nilfs_load_super_root(struct the_nilfs *nilfs,
struct nilfs_sb_info *sbi, sector_t sr_block)
{
+ static struct lock_class_key dat_lock_key;
struct buffer_head *bh_sr;
struct nilfs_super_root *raw_sr;
struct nilfs_super_block **sbp = nilfs->ns_sbp;
if (unlikely(err))
goto failed_sufile;
+ lockdep_set_class(&NILFS_MDT(nilfs->ns_dat)->mi_sem, &dat_lock_key);
+ lockdep_set_class(&NILFS_MDT(nilfs->ns_gc_dat)->mi_sem, &dat_lock_key);
+
nilfs_mdt_set_shadow(nilfs->ns_dat, nilfs->ns_gc_dat);
nilfs_mdt_set_entry_size(nilfs->ns_cpfile, checkpoint_size,
sizeof(struct nilfs_cpfile_header));
rem = 0;
}
- kevent->name = kmalloc(len + rem, GFP_KERNEL);
+ kevent->name = kmalloc(len + rem, GFP_NOFS);
if (unlikely(!kevent->name)) {
kmem_cache_free(event_cachep, kevent);
return NULL;
else
mlog_errno(ret);
+ /*
+ * In case of error, manually free the allocation and do the iput().
+ * We need to do this because error here means no d_instantiate(),
+ * which means iput() will not be called during dput(dentry).
+ */
+ if (ret < 0 && !alias) {
+ ocfs2_lock_res_free(&dl->dl_lockres);
+ BUG_ON(dl->dl_count != 1);
+ spin_lock(&dentry_attach_lock);
+ dentry->d_fsdata = NULL;
+ spin_unlock(&dentry_attach_lock);
+ kfree(dl);
+ iput(inode);
+ }
+
dput(alias);
return ret;
u32 *num_dx_entries,
struct buffer_head *dirent_bh)
{
- int ret, namelen, i;
+ int ret = 0, namelen, i;
char *de_buf, *limit;
struct ocfs2_dir_entry *de;
struct buffer_head *dx_leaf_bh;
*/
BUG_ON(alloc > 2);
- ret = ocfs2_reserve_clusters(osb, alloc, &data_ac);
+ ret = ocfs2_reserve_clusters(osb, alloc + dx_alloc, &data_ac);
if (ret) {
mlog_errno(ret);
goto out;
/* If the inode allocator bit is clear, this inode must be stale */
if (!set) {
- mlog(0, "inode %llu suballoc bit is clear\n", blkno);
+ mlog(0, "inode %llu suballoc bit is clear\n",
+ (unsigned long long)blkno);
status = -ESTALE;
goto unlock_nfs_sync;
}
if (status < 0) {
if (status == -ESTALE) {
mlog(0, "stale inode ino: %llu generation: %u\n",
- blkno, handle->ih_generation);
+ (unsigned long long)blkno, handle->ih_generation);
}
result = ERR_PTR(status);
goto bail;
check_gen:
if (handle->ih_generation != inode->i_generation) {
iput(inode);
- mlog(0, "stale inode ino: %llu generation: %u\n", blkno,
- handle->ih_generation);
+ mlog(0, "stale inode ino: %llu generation: %u\n",
+ (unsigned long long)blkno, handle->ih_generation);
result = ERR_PTR(-ESTALE);
goto bail;
}
return written ? written : ret;
}
+static int ocfs2_splice_to_file(struct pipe_inode_info *pipe,
+ struct file *out,
+ struct splice_desc *sd)
+{
+ int ret;
+
+ ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, &sd->pos,
+ sd->total_len, 0, NULL);
+ if (ret < 0) {
+ mlog_errno(ret);
+ return ret;
+ }
+
+ return splice_from_pipe_feed(pipe, sd, pipe_to_file);
+}
+
static ssize_t ocfs2_file_splice_write(struct pipe_inode_info *pipe,
struct file *out,
loff_t *ppos,
unsigned int flags)
{
int ret;
- struct inode *inode = out->f_path.dentry->d_inode;
+ struct address_space *mapping = out->f_mapping;
+ struct inode *inode = mapping->host;
+ struct splice_desc sd = {
+ .total_len = len,
+ .flags = flags,
+ .pos = *ppos,
+ .u.file = out,
+ };
mlog_entry("(0x%p, 0x%p, %u, '%.*s')\n", out, pipe,
(unsigned int)len,
out->f_path.dentry->d_name.len,
out->f_path.dentry->d_name.name);
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
+ if (pipe->inode)
+ mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_PARENT);
- ret = ocfs2_rw_lock(inode, 1);
- if (ret < 0) {
- mlog_errno(ret);
- goto out;
- }
+ splice_from_pipe_begin(&sd);
+ do {
+ ret = splice_from_pipe_next(pipe, &sd);
+ if (ret <= 0)
+ break;
- ret = ocfs2_prepare_inode_for_write(out->f_path.dentry, ppos, len, 0,
- NULL);
- if (ret < 0) {
- mlog_errno(ret);
- goto out_unlock;
- }
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+ ret = ocfs2_rw_lock(inode, 1);
+ if (ret < 0)
+ mlog_errno(ret);
+ else {
+ ret = ocfs2_splice_to_file(pipe, out, &sd);
+ ocfs2_rw_unlock(inode, 1);
+ }
+ mutex_unlock(&inode->i_mutex);
+ } while (ret > 0);
+ splice_from_pipe_end(pipe, &sd);
- if (pipe->inode)
- mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
- ret = generic_file_splice_write_nolock(pipe, out, ppos, len, flags);
if (pipe->inode)
mutex_unlock(&pipe->inode->i_mutex);
-out_unlock:
- ocfs2_rw_unlock(inode, 1);
-out:
- mutex_unlock(&inode->i_mutex);
+ if (sd.num_spliced)
+ ret = sd.num_spliced;
+
+ if (ret > 0) {
+ unsigned long nr_pages;
+
+ *ppos += ret;
+ nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
+
+ /*
+ * If file or inode is SYNC and we actually wrote some data,
+ * sync it.
+ */
+ if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
+ int err;
+
+ mutex_lock(&inode->i_mutex);
+ err = ocfs2_rw_lock(inode, 1);
+ if (err < 0) {
+ mlog_errno(err);
+ } else {
+ err = generic_osync_inode(inode, mapping,
+ OSYNC_METADATA|OSYNC_DATA);
+ ocfs2_rw_unlock(inode, 1);
+ }
+ mutex_unlock(&inode->i_mutex);
+
+ if (err)
+ ret = err;
+ }
+ balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
+ }
mlog_exit(ret);
return ret;
}
/* dinode + orphan dir dinode + inode alloc dinode + orphan dir entry +
- * inode alloc group descriptor + orphan dir index leaf */
-#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 3)
+ * inode alloc group descriptor + orphan dir index root +
+ * orphan dir index leaf */
+#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 4)
/* dinode update, old dir dinode update, new dir dinode update, old
* dir dir entry, new dir dir entry, dir entry update for renaming
struct inode *orphan_dir = NULL;
struct ocfs2_dinode *newfe = NULL;
char orphan_name[OCFS2_ORPHAN_NAMELEN + 1];
- struct buffer_head *orphan_entry_bh = NULL;
struct buffer_head *newfe_bh = NULL;
struct buffer_head *old_inode_bh = NULL;
- struct buffer_head *insert_entry_bh = NULL;
struct ocfs2_super *osb = NULL;
u64 newfe_blkno, old_de_ino;
handle_t *handle = NULL;
brelse(old_inode_bh);
brelse(old_dir_bh);
brelse(new_dir_bh);
- brelse(orphan_entry_bh);
- brelse(insert_entry_bh);
mlog_exit(status);
struct buffer_head *inode_bh = NULL;
struct ocfs2_dinode *inode_fe;
- mlog_entry("blkno: %llu\n", blkno);
+ mlog_entry("blkno: %llu\n", (unsigned long long)blkno);
/* dirty read disk */
status = ocfs2_read_blocks_sync(osb, blkno, 1, &inode_bh);
if (status < 0) {
- mlog(ML_ERROR, "read block %llu failed %d\n", blkno, status);
+ mlog(ML_ERROR, "read block %llu failed %d\n",
+ (unsigned long long)blkno, status);
goto bail;
}
inode_fe = (struct ocfs2_dinode *) inode_bh->b_data;
if (!OCFS2_IS_VALID_DINODE(inode_fe)) {
- mlog(ML_ERROR, "invalid inode %llu requested\n", blkno);
+ mlog(ML_ERROR, "invalid inode %llu requested\n",
+ (unsigned long long)blkno);
status = -EINVAL;
goto bail;
}
- if (le16_to_cpu(inode_fe->i_suballoc_slot) != OCFS2_INVALID_SLOT &&
+ if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT &&
(u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) {
mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n",
- blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
+ (unsigned long long)blkno,
+ (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
status = -EINVAL;
goto bail;
}
u64 bg_blkno;
int status;
- mlog_entry("blkno: %llu bit: %u\n", blkno, (unsigned int)bit);
+ mlog_entry("blkno: %llu bit: %u\n", (unsigned long long)blkno,
+ (unsigned int)bit);
alloc_fe = (struct ocfs2_dinode *)alloc_bh->b_data;
if ((bit + 1) > ocfs2_bits_per_group(&alloc_fe->id2.i_chain)) {
status = ocfs2_read_group_descriptor(suballoc, alloc_fe, bg_blkno,
&group_bh);
if (status < 0) {
- mlog(ML_ERROR, "read group %llu failed %d\n", bg_blkno, status);
+ mlog(ML_ERROR, "read group %llu failed %d\n",
+ (unsigned long long)bg_blkno, status);
goto bail;
}
struct inode *inode_alloc_inode;
struct buffer_head *alloc_bh = NULL;
- mlog_entry("blkno: %llu", blkno);
+ mlog_entry("blkno: %llu", (unsigned long long)blkno);
status = ocfs2_get_suballoc_slot_bit(osb, blkno, &suballoc_slot,
&suballoc_bit);
#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/utsname.h>
+#include <linux/namei.h>
#define MLOG_MASK_PREFIX ML_NAMEI
#include <cluster/masklog.h>
#include "buffer_head_io.h"
-static char *ocfs2_page_getlink(struct dentry * dentry,
- struct page **ppage);
-static char *ocfs2_fast_symlink_getlink(struct inode *inode,
- struct buffer_head **bh);
-
-/* get the link contents into pagecache */
-static char *ocfs2_page_getlink(struct dentry * dentry,
- struct page **ppage)
-{
- struct page * page;
- struct address_space *mapping = dentry->d_inode->i_mapping;
- page = read_mapping_page(mapping, 0, NULL);
- if (IS_ERR(page))
- goto sync_fail;
- *ppage = page;
- return kmap(page);
-
-sync_fail:
- return (char*)page;
-}
static char *ocfs2_fast_symlink_getlink(struct inode *inode,
struct buffer_head **bh)
return ret;
}
-static void *ocfs2_follow_link(struct dentry *dentry,
- struct nameidata *nd)
+static void *ocfs2_fast_follow_link(struct dentry *dentry,
+ struct nameidata *nd)
{
- int status;
- char *link;
+ int status = 0;
+ int len;
+ char *target, *link = ERR_PTR(-ENOMEM);
struct inode *inode = dentry->d_inode;
- struct page *page = NULL;
struct buffer_head *bh = NULL;
-
- if (ocfs2_inode_is_fast_symlink(inode))
- link = ocfs2_fast_symlink_getlink(inode, &bh);
- else
- link = ocfs2_page_getlink(dentry, &page);
- if (IS_ERR(link)) {
- status = PTR_ERR(link);
+
+ mlog_entry_void();
+
+ BUG_ON(!ocfs2_inode_is_fast_symlink(inode));
+ target = ocfs2_fast_symlink_getlink(inode, &bh);
+ if (IS_ERR(target)) {
+ status = PTR_ERR(target);
mlog_errno(status);
goto bail;
}
- status = vfs_follow_link(nd, link);
+ /* Fast symlinks can't be large */
+ len = strlen(target);
+ link = kzalloc(len + 1, GFP_NOFS);
+ if (!link) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto bail;
+ }
+
+ memcpy(link, target, len);
+ nd_set_link(nd, link);
bail:
- if (page) {
- kunmap(page);
- page_cache_release(page);
- }
brelse(bh);
- return ERR_PTR(status);
+ mlog_exit(status);
+ return status ? ERR_PTR(status) : link;
+}
+
+static void ocfs2_fast_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
+{
+ char *link = cookie;
+
+ kfree(link);
}
const struct inode_operations ocfs2_symlink_inode_operations = {
.readlink = page_readlink,
- .follow_link = ocfs2_follow_link,
+ .follow_link = page_follow_link_light,
+ .put_link = page_put_link,
.getattr = ocfs2_getattr,
.setattr = ocfs2_setattr,
.setxattr = generic_setxattr,
};
const struct inode_operations ocfs2_fast_symlink_inode_operations = {
.readlink = ocfs2_readlink,
- .follow_link = ocfs2_follow_link,
+ .follow_link = ocfs2_fast_follow_link,
+ .put_link = ocfs2_fast_put_link,
.getattr = ocfs2_getattr,
.setattr = ocfs2_setattr,
.setxattr = generic_setxattr,
if (!IS_ERR(tmp)) {
fd = get_unused_fd_flags(flags);
if (fd >= 0) {
- struct file *f = do_filp_open(dfd, tmp, flags, mode);
+ struct file *f = do_filp_open(dfd, tmp, flags, mode, 0);
if (IS_ERR(f)) {
put_unused_fd(fd);
fd = PTR_ERR(f);
* -- Manfred Spraul <manfred@colorfullife.com> 2002-05-09
*/
+static void pipe_lock_nested(struct pipe_inode_info *pipe, int subclass)
+{
+ if (pipe->inode)
+ mutex_lock_nested(&pipe->inode->i_mutex, subclass);
+}
+
+void pipe_lock(struct pipe_inode_info *pipe)
+{
+ /*
+ * pipe_lock() nests non-pipe inode locks (for writing to a file)
+ */
+ pipe_lock_nested(pipe, I_MUTEX_PARENT);
+}
+EXPORT_SYMBOL(pipe_lock);
+
+void pipe_unlock(struct pipe_inode_info *pipe)
+{
+ if (pipe->inode)
+ mutex_unlock(&pipe->inode->i_mutex);
+}
+EXPORT_SYMBOL(pipe_unlock);
+
+void pipe_double_lock(struct pipe_inode_info *pipe1,
+ struct pipe_inode_info *pipe2)
+{
+ BUG_ON(pipe1 == pipe2);
+
+ if (pipe1 < pipe2) {
+ pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+ pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+ } else {
+ pipe_lock_nested(pipe2, I_MUTEX_CHILD);
+ pipe_lock_nested(pipe1, I_MUTEX_PARENT);
+ }
+}
+
/* Drop the inode semaphore and wait for a pipe event, atomically */
void pipe_wait(struct pipe_inode_info *pipe)
{
* is considered a noninteractive wait:
*/
prepare_to_wait(&pipe->wait, &wait, TASK_INTERRUPTIBLE);
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
schedule();
finish_wait(&pipe->wait, &wait);
- if (pipe->inode)
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
}
static int
#include <linux/delayacct.h>
#include <linux/seq_file.h>
#include <linux/pid_namespace.h>
+#include <linux/ptrace.h>
#include <linux/tracehook.h>
#include <asm/pgtable.h>
char state;
pid_t ppid = 0, pgid = -1, sid = -1;
int num_threads = 0;
+ int permitted;
struct mm_struct *mm;
unsigned long long start_time;
unsigned long cmin_flt = 0, cmaj_flt = 0;
state = *get_task_state(task);
vsize = eip = esp = 0;
+ permitted = ptrace_may_access(task, PTRACE_MODE_READ);
mm = get_task_mm(task);
if (mm) {
vsize = task_vsize(mm);
- eip = KSTK_EIP(task);
- esp = KSTK_ESP(task);
+ if (permitted) {
+ eip = KSTK_EIP(task);
+ esp = KSTK_ESP(task);
+ }
}
get_task_comm(tcomm, task);
unlock_task_sighand(task, &flags);
}
- if (!whole || num_threads < 2)
+ if (permitted && (!whole || num_threads < 2))
wchan = get_wchan(task);
if (!whole) {
min_flt = task->min_flt;
rsslim,
mm ? mm->start_code : 0,
mm ? mm->end_code : 0,
- mm ? mm->start_stack : 0,
+ (permitted && mm) ? mm->start_stack : 0,
esp,
eip,
/* The signal information here is obsolete.
wchan = get_wchan(task);
if (lookup_symbol_name(wchan, symname) < 0)
- return sprintf(buffer, "%lu", wchan);
+ if (!ptrace_may_access(task, PTRACE_MODE_READ))
+ return 0;
+ else
+ return sprintf(buffer, "%lu", wchan);
else
return sprintf(buffer, "%s", symname);
}
{
struct proc_mounts *p = file->private_data;
struct mnt_namespace *ns = p->ns;
- unsigned res = 0;
+ unsigned res = POLLIN | POLLRDNORM;
poll_wait(file, &ns->poll, wait);
spin_lock(&vfsmount_lock);
if (p->event != ns->event) {
p->event = ns->event;
- res = POLLERR;
+ res |= POLLERR | POLLPRI;
}
spin_unlock(&vfsmount_lock);
#define K(x) ((x) << (PAGE_SHIFT - 10))
si_meminfo(&i);
si_swapinfo(&i);
- committed = atomic_long_read(&vm_committed_space);
+ committed = percpu_counter_read_positive(&vm_committed_as);
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100) + total_swap_pages;
sb->s_flags = flags;
err = proc_fill_super(sb);
if (err) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return err;
}
#ifndef arch_irq_stat
#define arch_irq_stat() 0
#endif
+#ifndef arch_idle_time
+#define arch_idle_time(cpu) 0
+#endif
static int show_stat(struct seq_file *p, void *v)
{
nice = cputime64_add(nice, kstat_cpu(i).cpustat.nice);
system = cputime64_add(system, kstat_cpu(i).cpustat.system);
idle = cputime64_add(idle, kstat_cpu(i).cpustat.idle);
+ idle = cputime64_add(idle, arch_idle_time(i));
iowait = cputime64_add(iowait, kstat_cpu(i).cpustat.iowait);
irq = cputime64_add(irq, kstat_cpu(i).cpustat.irq);
softirq = cputime64_add(softirq, kstat_cpu(i).cpustat.softirq);
nice = kstat_cpu(i).cpustat.nice;
system = kstat_cpu(i).cpustat.system;
idle = kstat_cpu(i).cpustat.idle;
+ idle = cputime64_add(idle, arch_idle_time(i));
iowait = kstat_cpu(i).cpustat.iowait;
irq = kstat_cpu(i).cpustat.irq;
softirq = kstat_cpu(i).cpustat.softirq;
goto out_task;
ret = 0;
+
+ if (!count)
+ goto out_task;
+
mm = get_task_mm(task);
if (!mm)
goto out_task;
-#
-# Makefile for the Linux filesystems.
-#
-# 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
-# Rewritten to use lists instead of if-statements.
-#
-
-obj-y :=
-
obj-$(CONFIG_QUOTA) += dquot.o
obj-$(CONFIG_QFMT_V1) += quota_v1.o
obj-$(CONFIG_QFMT_V2) += quota_v2.o
#define store_ih(where,what) copy_item_head (where, what)
+static inline bool is_privroot_deh(struct dentry *dir,
+ struct reiserfs_de_head *deh)
+{
+ int ret = 0;
+#ifdef CONFIG_REISERFS_FS_XATTR
+ struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root;
+ ret = (dir == dir->d_parent && privroot->d_inode &&
+ deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
+#endif
+ return ret;
+}
+
int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
filldir_t filldir, loff_t *pos)
{
}
/* Ignore the .reiserfs_priv entry */
- if (reiserfs_xattrs(inode->i_sb) &&
- !old_format_only(inode->i_sb) &&
- dentry == inode->i_sb->s_root &&
- REISERFS_SB(inode->i_sb)->priv_root &&
- REISERFS_SB(inode->i_sb)->priv_root->d_inode
- && deh_objectid(deh) ==
- le32_to_cpu(INODE_PKEY
- (REISERFS_SB(inode->i_sb)->
- priv_root->d_inode)->
- k_objectid)) {
+ if (is_privroot_deh(dentry, deh))
continue;
- }
d_off = deh_offset(deh);
*pos = d_off;
&path_to_entry, &de);
pathrelse(&path_to_entry);
if (retval == NAME_FOUND) {
- /* Hide the .reiserfs_priv directory */
- if (reiserfs_xattrs(dir->i_sb) &&
- !old_format_only(dir->i_sb) &&
- REISERFS_SB(dir->i_sb)->priv_root &&
- REISERFS_SB(dir->i_sb)->priv_root->d_inode &&
- de.de_objectid ==
- le32_to_cpu(INODE_PKEY
- (REISERFS_SB(dir->i_sb)->priv_root->d_inode)->
- k_objectid)) {
- reiserfs_write_unlock(dir->i_sb);
- return ERR_PTR(-EACCES);
- }
-
- inode =
- reiserfs_iget(dir->i_sb, (struct cpu_key *)&(de.de_dir_id));
+ inode = reiserfs_iget(dir->i_sb,
+ (struct cpu_key *)&(de.de_dir_id));
if (!inode || IS_ERR(inode)) {
reiserfs_write_unlock(dir->i_sb);
return ERR_PTR(-EACCES);
}
out_ok:
- kfree(s->s_options);
- s->s_options = new_opts;
+ replace_mount_options(s, new_opts);
return 0;
out_err:
goto error;
}
- if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+ if ((errval = reiserfs_lookup_privroot(s)) ||
+ (errval = reiserfs_xattr_init(s, s->s_flags))) {
dput(s->s_root);
s->s_root = NULL;
goto error;
reiserfs_info(s, "using 3.5.x disk format\n");
}
- if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+ if ((errval = reiserfs_lookup_privroot(s)) ||
+ (errval = reiserfs_xattr_init(s, s->s_flags))) {
dput(s->s_root);
s->s_root = NULL;
goto error;
#define xattr_may_create(flags) (!flags || flags & XATTR_CREATE)
-/* Returns and possibly creates the xattr dir. */
-static struct dentry *lookup_or_create_dir(struct dentry *parent,
- const char *name, int flags)
+static struct dentry *open_xa_root(struct super_block *sb, int flags)
{
- struct dentry *dentry;
- BUG_ON(!parent);
+ struct dentry *privroot = REISERFS_SB(sb)->priv_root;
+ struct dentry *xaroot;
+ if (!privroot->d_inode)
+ return ERR_PTR(-ENODATA);
- dentry = lookup_one_len(name, parent, strlen(name));
- if (IS_ERR(dentry))
- return dentry;
- else if (!dentry->d_inode) {
- int err = -ENODATA;
-
- if (xattr_may_create(flags)) {
- mutex_lock_nested(&parent->d_inode->i_mutex,
- I_MUTEX_XATTR);
- err = xattr_mkdir(parent->d_inode, dentry, 0700);
- mutex_unlock(&parent->d_inode->i_mutex);
- }
+ mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR);
+ xaroot = dget(REISERFS_SB(sb)->xattr_root);
+ if (!xaroot->d_inode) {
+ int err = -ENODATA;
+ if (xattr_may_create(flags))
+ err = xattr_mkdir(privroot->d_inode, xaroot, 0700);
if (err) {
- dput(dentry);
- dentry = ERR_PTR(err);
+ dput(xaroot);
+ xaroot = ERR_PTR(err);
}
}
- return dentry;
-}
-
-static struct dentry *open_xa_root(struct super_block *sb, int flags)
-{
- struct dentry *privroot = REISERFS_SB(sb)->priv_root;
- if (!privroot)
- return ERR_PTR(-ENODATA);
- return lookup_or_create_dir(privroot, XAROOT_NAME, flags);
+ mutex_unlock(&privroot->d_inode->i_mutex);
+ return xaroot;
}
static struct dentry *open_xa_dir(const struct inode *inode, int flags)
le32_to_cpu(INODE_PKEY(inode)->k_objectid),
inode->i_generation);
- xadir = lookup_or_create_dir(xaroot, namebuf, flags);
+ mutex_lock_nested(&xaroot->d_inode->i_mutex, I_MUTEX_XATTR);
+
+ xadir = lookup_one_len(namebuf, xaroot, strlen(namebuf));
+ if (!IS_ERR(xadir) && !xadir->d_inode) {
+ int err = -ENODATA;
+ if (xattr_may_create(flags))
+ err = xattr_mkdir(xaroot->d_inode, xadir, 0700);
+ if (err) {
+ dput(xadir);
+ xadir = ERR_PTR(err);
+ }
+ }
+
+ mutex_unlock(&xaroot->d_inode->i_mutex);
dput(xaroot);
return xadir;
-
}
/* The following are side effects of other operations that aren't explicitly
{
struct reiserfs_dentry_buf *dbuf = buf;
struct dentry *dentry;
+ WARN_ON_ONCE(!mutex_is_locked(&dbuf->xadir->d_inode->i_mutex));
if (dbuf->count == ARRAY_SIZE(dbuf->dentries))
return -ENOSPC;
if (IS_ERR(xadir))
return ERR_CAST(xadir);
+ mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
xafile = lookup_one_len(name, xadir, strlen(name));
if (IS_ERR(xafile)) {
err = PTR_ERR(xafile);
if (!xafile->d_inode) {
err = -ENODATA;
- if (xattr_may_create(flags)) {
- mutex_lock_nested(&xadir->d_inode->i_mutex,
- I_MUTEX_XATTR);
+ if (xattr_may_create(flags))
err = xattr_create(xadir->d_inode, xafile,
0700|S_IFREG);
- mutex_unlock(&xadir->d_inode->i_mutex);
- }
}
if (err)
dput(xafile);
out:
+ mutex_unlock(&xadir->d_inode->i_mutex);
dput(xadir);
if (err)
return ERR_PTR(err);
if (IS_ERR(xadir))
return PTR_ERR(xadir);
+ mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
dentry = lookup_one_len(name, xadir, strlen(name));
if (IS_ERR(dentry)) {
err = PTR_ERR(dentry);
}
if (dentry->d_inode) {
- mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
err = xattr_unlink(xadir->d_inode, dentry);
- mutex_unlock(&xadir->d_inode->i_mutex);
update_ctime(inode);
}
dput(dentry);
out_dput:
+ mutex_unlock(&xadir->d_inode->i_mutex);
dput(xadir);
return err;
}
if (!dentry->d_inode)
return -EINVAL;
- if (!reiserfs_xattrs(dentry->d_sb) ||
+ if (!dentry->d_sb->s_xattr ||
get_inode_sd_version(dentry->d_inode) == STAT_DATA_V1)
return -EOPNOTSUPP;
{
int err;
struct inode *inode = dentry->d_parent->d_inode;
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR);
+ WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
+
err = xattr_mkdir(inode, dentry, 0700);
- mutex_unlock(&inode->i_mutex);
- if (err) {
- dput(dentry);
- dentry = NULL;
+ if (err || !dentry->d_inode) {
+ reiserfs_warning(dentry->d_sb, "jdm-20006",
+ "xattrs/ACLs enabled and couldn't "
+ "find/create .reiserfs_priv. "
+ "Failing mount.");
+ return -EOPNOTSUPP;
}
- if (dentry && dentry->d_inode)
- reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
- "storage.\n", PRIVROOT_NAME);
+ dentry->d_inode->i_flags |= S_PRIVATE;
+ reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
+ "storage.\n", PRIVROOT_NAME);
- return err;
+ return 0;
}
static int xattr_mount_check(struct super_block *s)
xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name)
{
struct dentry *priv_root = REISERFS_SB(dentry->d_sb)->priv_root;
- if (name->len == priv_root->d_name.len &&
- name->hash == priv_root->d_name.hash &&
- !memcmp(name->name, priv_root->d_name.name, name->len)) {
+ if (container_of(q1, struct dentry, d_name) == priv_root)
return -ENOENT;
- } else if (q1->len == name->len &&
+ if (q1->len == name->len &&
!memcmp(q1->name, name->name, name->len))
return 0;
return 1;
.d_compare = xattr_lookup_poison,
};
+int reiserfs_lookup_privroot(struct super_block *s)
+{
+ struct dentry *dentry;
+ int err = 0;
+
+ /* If we don't have the privroot located yet - go find it */
+ mutex_lock(&s->s_root->d_inode->i_mutex);
+ dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
+ strlen(PRIVROOT_NAME));
+ if (!IS_ERR(dentry)) {
+ REISERFS_SB(s)->priv_root = dentry;
+ s->s_root->d_op = &xattr_lookup_poison_ops;
+ if (dentry->d_inode)
+ dentry->d_inode->i_flags |= S_PRIVATE;
+ } else
+ err = PTR_ERR(dentry);
+ mutex_unlock(&s->s_root->d_inode->i_mutex);
+
+ return err;
+}
+
/* We need to take a copy of the mount flags since things like
* MS_RDONLY don't get set until *after* we're called.
* mount_flags != mount_options */
int reiserfs_xattr_init(struct super_block *s, int mount_flags)
{
int err = 0;
+ struct dentry *privroot = REISERFS_SB(s)->priv_root;
#ifdef CONFIG_REISERFS_FS_XATTR
err = xattr_mount_check(s);
if (err)
goto error;
-#endif
- /* If we don't have the privroot located yet - go find it */
- if (!REISERFS_SB(s)->priv_root) {
- struct dentry *dentry;
- dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
- strlen(PRIVROOT_NAME));
- if (!IS_ERR(dentry)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
- if (!(mount_flags & MS_RDONLY) && !dentry->d_inode)
- err = create_privroot(dentry);
-#endif
- if (!dentry->d_inode) {
- dput(dentry);
- dentry = NULL;
- }
- } else
- err = PTR_ERR(dentry);
-
- if (!err && dentry) {
- s->s_root->d_op = &xattr_lookup_poison_ops;
- dentry->d_inode->i_flags |= S_PRIVATE;
- REISERFS_SB(s)->priv_root = dentry;
-#ifdef CONFIG_REISERFS_FS_XATTR
- /* xattrs are unavailable */
- } else if (!(mount_flags & MS_RDONLY)) {
- /* If we're read-only it just means that the dir
- * hasn't been created. Not an error -- just no
- * xattrs on the fs. We'll check again if we
- * go read-write */
- reiserfs_warning(s, "jdm-20006",
- "xattrs/ACLs enabled and couldn't "
- "find/create .reiserfs_priv. "
- "Failing mount.");
- err = -EOPNOTSUPP;
-#endif
- }
+ if (!privroot->d_inode && !(mount_flags & MS_RDONLY)) {
+ mutex_lock(&s->s_root->d_inode->i_mutex);
+ err = create_privroot(REISERFS_SB(s)->priv_root);
+ mutex_unlock(&s->s_root->d_inode->i_mutex);
}
-#ifdef CONFIG_REISERFS_FS_XATTR
- if (!err)
+ if (privroot->d_inode) {
s->s_xattr = reiserfs_xattr_handlers;
+ mutex_lock(&privroot->d_inode->i_mutex);
+ if (!REISERFS_SB(s)->xattr_root) {
+ struct dentry *dentry;
+ dentry = lookup_one_len(XAROOT_NAME, privroot,
+ strlen(XAROOT_NAME));
+ if (!IS_ERR(dentry))
+ REISERFS_SB(s)->xattr_root = dentry;
+ else
+ err = PTR_ERR(dentry);
+ }
+ mutex_unlock(&privroot->d_inode->i_mutex);
+ }
error:
if (err) {
#endif
/* The super_block MS_POSIXACL must mirror the (no)acl mount option. */
- s->s_flags = s->s_flags & ~MS_POSIXACL;
#ifdef CONFIG_REISERFS_FS_POSIX_ACL
if (reiserfs_posixacl(s))
s->s_flags |= MS_POSIXACL;
+ else
#endif
+ s->s_flags &= ~MS_POSIXACL;
return err;
}
struct reiserfs_security_handle *sec)
{
int blocks = 0;
- int error = security_inode_init_security(inode, dir, &sec->name,
- &sec->value, &sec->length);
+ int error;
+
+ sec->name = NULL;
+
+ /* Don't add selinux attributes on xattrs - they'll never get used */
+ if (IS_PRIVATE(dir))
+ return 0;
+
+ error = security_inode_init_security(inode, dir, &sec->name,
+ &sec->value, &sec->length);
if (error) {
if (error == -EOPNOTSUPP)
error = 0;
void *buf, size_t buflen);
extern ssize_t romfs_dev_strnlen(struct super_block *sb,
unsigned long pos, size_t maxlen);
-extern int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size);
+extern int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size);
* compare a string to one in a romfs image on MTD
* - return 1 if matched, 0 if differ, -ve if error
*/
-static int romfs_mtd_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size)
+static int romfs_mtd_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size)
{
- u_char buf[16];
+ u_char buf[17];
size_t len, segment;
int ret;
- /* scan the string up to 16 bytes at a time */
+ /* scan the string up to 16 bytes at a time, and attempt to grab the
+ * trailing NUL whilst we're at it */
+ buf[0] = 0xff;
+
while (size > 0) {
- segment = min_t(size_t, size, 16);
+ segment = min_t(size_t, size + 1, 17);
ret = ROMFS_MTD_READ(sb, pos, segment, &len, buf);
if (ret < 0)
return ret;
+ len--;
if (memcmp(buf, str, len) != 0)
return 0;
+ buf[0] = buf[len];
size -= len;
pos += len;
str += len;
}
+ /* check the trailing NUL was */
+ if (buf[0])
+ return 0;
+
return 1;
}
#endif /* CONFIG_ROMFS_ON_MTD */
return -EIO;
memcpy(buf, bh->b_data + offset, segment);
brelse(bh);
+ buf += segment;
buflen -= segment;
pos += segment;
}
* compare a string to one in a romfs image on a block device
* - return 1 if matched, 0 if differ, -ve if error
*/
-static int romfs_blk_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size)
+static int romfs_blk_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size)
{
struct buffer_head *bh;
unsigned long offset;
size_t segment;
- bool x;
+ bool matched, terminated = false;
- /* scan the string up to 16 bytes at a time */
+ /* compare string up to a block at a time */
while (size > 0) {
offset = pos & (ROMBSIZE - 1);
segment = min_t(size_t, size, ROMBSIZE - offset);
bh = sb_bread(sb, pos >> ROMBSBITS);
if (!bh)
return -EIO;
- x = (memcmp(bh->b_data + offset, str, segment) != 0);
- brelse(bh);
- if (x)
- return 0;
+ matched = (memcmp(bh->b_data + offset, str, segment) == 0);
+
size -= segment;
pos += segment;
str += segment;
+ if (matched && size == 0 && offset + segment < ROMBSIZE) {
+ if (!bh->b_data[offset + segment])
+ terminated = true;
+ else
+ matched = false;
+ }
+ brelse(bh);
+ if (!matched)
+ return 0;
+ }
+
+ if (!terminated) {
+ /* the terminating NUL must be on the first byte of the next
+ * block */
+ BUG_ON((pos & (ROMBSIZE - 1)) != 0);
+ bh = sb_bread(sb, pos >> ROMBSBITS);
+ if (!bh)
+ return -EIO;
+ matched = !bh->b_data[0];
+ brelse(bh);
+ if (!matched)
+ return 0;
}
return 1;
/*
* compare a string to one in romfs
+ * - the string to be compared to, str, may not be NUL-terminated; instead the
+ * string is of the specified size
* - return 1 if matched, 0 if differ, -ve if error
*/
-int romfs_dev_strncmp(struct super_block *sb, unsigned long pos,
- const char *str, size_t size)
+int romfs_dev_strcmp(struct super_block *sb, unsigned long pos,
+ const char *str, size_t size)
{
size_t limit;
return -EIO;
if (size > ROMFS_MAXFN)
return -ENAMETOOLONG;
- if (size > limit - pos)
+ if (size + 1 > limit - pos)
return -EIO;
#ifdef CONFIG_ROMFS_ON_MTD
if (sb->s_mtd)
- return romfs_mtd_strncmp(sb, pos, str, size);
+ return romfs_mtd_strcmp(sb, pos, str, size);
#endif
#ifdef CONFIG_ROMFS_ON_BLOCK
if (sb->s_bdev)
- return romfs_blk_strncmp(sb, pos, str, size);
+ return romfs_blk_strcmp(sb, pos, str, size);
#endif
return -EIO;
}
goto error;
/* try to match the first 16 bytes of name */
- ret = romfs_dev_strncmp(dir->i_sb, offset + ROMFH_SIZE, name,
- len);
+ ret = romfs_dev_strcmp(dir->i_sb, offset + ROMFH_SIZE, name,
+ len);
if (ret < 0)
goto error;
if (ret == 1)
struct romfs_inode ri;
struct inode *i;
unsigned long nlen;
- unsigned nextfh, ret;
+ unsigned nextfh;
+ int ret;
umode_t mode;
/* we might have to traverse a chain of "hard link" file entries to get
do_wakeup = 0;
page_nr = 0;
- if (pipe->inode)
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
for (;;) {
if (!pipe->readers) {
pipe->waiting_writers--;
}
- if (pipe->inode) {
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible(&pipe->wait);
- kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
- }
+ if (do_wakeup) {
+ smp_mb();
+ if (waitqueue_active(&pipe->wait))
+ wake_up_interruptible(&pipe->wait);
+ kill_fasync(&pipe->fasync_readers, SIGIO, POLL_IN);
}
while (page_nr < spd_pages)
* SPLICE_F_MOVE isn't set, or we cannot move the page, we simply create
* a new page in the output file page cache and fill/dirty that.
*/
-static int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
- struct splice_desc *sd)
+int pipe_to_file(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
+ struct splice_desc *sd)
{
struct file *file = sd->u.file;
struct address_space *mapping = file->f_mapping;
out:
return ret;
}
+EXPORT_SYMBOL(pipe_to_file);
+
+static void wakeup_pipe_writers(struct pipe_inode_info *pipe)
+{
+ smp_mb();
+ if (waitqueue_active(&pipe->wait))
+ wake_up_interruptible(&pipe->wait);
+ kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
+}
/**
- * __splice_from_pipe - splice data from a pipe to given actor
+ * splice_from_pipe_feed - feed available data from a pipe to a file
* @pipe: pipe to splice from
* @sd: information to @actor
* @actor: handler that splices the data
*
* Description:
- * This function does little more than loop over the pipe and call
- * @actor to do the actual moving of a single struct pipe_buffer to
- * the desired destination. See pipe_to_file, pipe_to_sendpage, or
- * pipe_to_user.
+ * This function loops over the pipe and calls @actor to do the
+ * actual moving of a single struct pipe_buffer to the desired
+ * destination. It returns when there's no more buffers left in
+ * the pipe or if the requested number of bytes (@sd->total_len)
+ * have been copied. It returns a positive number (one) if the
+ * pipe needs to be filled with more data, zero if the required
+ * number of bytes have been copied and -errno on error.
*
+ * This, together with splice_from_pipe_{begin,end,next}, may be
+ * used to implement the functionality of __splice_from_pipe() when
+ * locking is required around copying the pipe buffers to the
+ * destination.
*/
-ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
- splice_actor *actor)
+int splice_from_pipe_feed(struct pipe_inode_info *pipe, struct splice_desc *sd,
+ splice_actor *actor)
{
- int ret, do_wakeup, err;
-
- ret = 0;
- do_wakeup = 0;
-
- for (;;) {
- if (pipe->nrbufs) {
- struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
- const struct pipe_buf_operations *ops = buf->ops;
+ int ret;
- sd->len = buf->len;
- if (sd->len > sd->total_len)
- sd->len = sd->total_len;
+ while (pipe->nrbufs) {
+ struct pipe_buffer *buf = pipe->bufs + pipe->curbuf;
+ const struct pipe_buf_operations *ops = buf->ops;
- err = actor(pipe, buf, sd);
- if (err <= 0) {
- if (!ret && err != -ENODATA)
- ret = err;
+ sd->len = buf->len;
+ if (sd->len > sd->total_len)
+ sd->len = sd->total_len;
- break;
- }
+ ret = actor(pipe, buf, sd);
+ if (ret <= 0) {
+ if (ret == -ENODATA)
+ ret = 0;
+ return ret;
+ }
+ buf->offset += ret;
+ buf->len -= ret;
- ret += err;
- buf->offset += err;
- buf->len -= err;
+ sd->num_spliced += ret;
+ sd->len -= ret;
+ sd->pos += ret;
+ sd->total_len -= ret;
- sd->len -= err;
- sd->pos += err;
- sd->total_len -= err;
- if (sd->len)
- continue;
+ if (!buf->len) {
+ buf->ops = NULL;
+ ops->release(pipe, buf);
+ pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
+ pipe->nrbufs--;
+ if (pipe->inode)
+ sd->need_wakeup = true;
+ }
- if (!buf->len) {
- buf->ops = NULL;
- ops->release(pipe, buf);
- pipe->curbuf = (pipe->curbuf + 1) & (PIPE_BUFFERS - 1);
- pipe->nrbufs--;
- if (pipe->inode)
- do_wakeup = 1;
- }
+ if (!sd->total_len)
+ return 0;
+ }
- if (!sd->total_len)
- break;
- }
+ return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_feed);
- if (pipe->nrbufs)
- continue;
+/**
+ * splice_from_pipe_next - wait for some data to splice from
+ * @pipe: pipe to splice from
+ * @sd: information about the splice operation
+ *
+ * Description:
+ * This function will wait for some data and return a positive
+ * value (one) if pipe buffers are available. It will return zero
+ * or -errno if no more data needs to be spliced.
+ */
+int splice_from_pipe_next(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+ while (!pipe->nrbufs) {
if (!pipe->writers)
- break;
- if (!pipe->waiting_writers) {
- if (ret)
- break;
- }
+ return 0;
- if (sd->flags & SPLICE_F_NONBLOCK) {
- if (!ret)
- ret = -EAGAIN;
- break;
- }
+ if (!pipe->waiting_writers && sd->num_spliced)
+ return 0;
- if (signal_pending(current)) {
- if (!ret)
- ret = -ERESTARTSYS;
- break;
- }
+ if (sd->flags & SPLICE_F_NONBLOCK)
+ return -EAGAIN;
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible_sync(&pipe->wait);
- kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
- do_wakeup = 0;
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+
+ if (sd->need_wakeup) {
+ wakeup_pipe_writers(pipe);
+ sd->need_wakeup = false;
}
pipe_wait(pipe);
}
- if (do_wakeup) {
- smp_mb();
- if (waitqueue_active(&pipe->wait))
- wake_up_interruptible(&pipe->wait);
- kill_fasync(&pipe->fasync_writers, SIGIO, POLL_OUT);
- }
+ return 1;
+}
+EXPORT_SYMBOL(splice_from_pipe_next);
- return ret;
+/**
+ * splice_from_pipe_begin - start splicing from pipe
+ * @sd: information about the splice operation
+ *
+ * Description:
+ * This function should be called before a loop containing
+ * splice_from_pipe_next() and splice_from_pipe_feed() to
+ * initialize the necessary fields of @sd.
+ */
+void splice_from_pipe_begin(struct splice_desc *sd)
+{
+ sd->num_spliced = 0;
+ sd->need_wakeup = false;
+}
+EXPORT_SYMBOL(splice_from_pipe_begin);
+
+/**
+ * splice_from_pipe_end - finish splicing from pipe
+ * @pipe: pipe to splice from
+ * @sd: information about the splice operation
+ *
+ * Description:
+ * This function will wake up pipe writers if necessary. It should
+ * be called after a loop containing splice_from_pipe_next() and
+ * splice_from_pipe_feed().
+ */
+void splice_from_pipe_end(struct pipe_inode_info *pipe, struct splice_desc *sd)
+{
+ if (sd->need_wakeup)
+ wakeup_pipe_writers(pipe);
+}
+EXPORT_SYMBOL(splice_from_pipe_end);
+
+/**
+ * __splice_from_pipe - splice data from a pipe to given actor
+ * @pipe: pipe to splice from
+ * @sd: information to @actor
+ * @actor: handler that splices the data
+ *
+ * Description:
+ * This function does little more than loop over the pipe and call
+ * @actor to do the actual moving of a single struct pipe_buffer to
+ * the desired destination. See pipe_to_file, pipe_to_sendpage, or
+ * pipe_to_user.
+ *
+ */
+ssize_t __splice_from_pipe(struct pipe_inode_info *pipe, struct splice_desc *sd,
+ splice_actor *actor)
+{
+ int ret;
+
+ splice_from_pipe_begin(sd);
+ do {
+ ret = splice_from_pipe_next(pipe, sd);
+ if (ret > 0)
+ ret = splice_from_pipe_feed(pipe, sd, actor);
+ } while (ret > 0);
+ splice_from_pipe_end(pipe, sd);
+
+ return sd->num_spliced ? sd->num_spliced : ret;
}
EXPORT_SYMBOL(__splice_from_pipe);
* @actor: handler that splices the data
*
* Description:
- * See __splice_from_pipe. This function locks the input and output inodes,
+ * See __splice_from_pipe. This function locks the pipe inode,
* otherwise it's identical to __splice_from_pipe().
*
*/
splice_actor *actor)
{
ssize_t ret;
- struct inode *inode = out->f_mapping->host;
struct splice_desc sd = {
.total_len = len,
.flags = flags,
.u.file = out,
};
- /*
- * The actor worker might be calling ->write_begin and
- * ->write_end. Most of the time, these expect i_mutex to
- * be held. Since this may result in an ABBA deadlock with
- * pipe->inode, we have to order lock acquiry here.
- *
- * Outer lock must be inode->i_mutex, as pipe_wait() will
- * release and reacquire pipe->inode->i_mutex, AND inode must
- * never be a pipe.
- */
- WARN_ON(S_ISFIFO(inode->i_mode));
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
- if (pipe->inode)
- mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
+ pipe_lock(pipe);
ret = __splice_from_pipe(pipe, &sd, actor);
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
- mutex_unlock(&inode->i_mutex);
+ pipe_unlock(pipe);
return ret;
}
/**
- * generic_file_splice_write_nolock - generic_file_splice_write without mutexes
+ * generic_file_splice_write - splice data from a pipe to a file
* @pipe: pipe info
* @out: file to write to
* @ppos: position in @out
*
* Description:
* Will either move or copy pages (determined by @flags options) from
- * the given pipe inode to the given file. The caller is responsible
- * for acquiring i_mutex on both inodes.
+ * the given pipe inode to the given file.
*
*/
ssize_t
-generic_file_splice_write_nolock(struct pipe_inode_info *pipe, struct file *out,
- loff_t *ppos, size_t len, unsigned int flags)
+generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
+ loff_t *ppos, size_t len, unsigned int flags)
{
struct address_space *mapping = out->f_mapping;
struct inode *inode = mapping->host;
.u.file = out,
};
ssize_t ret;
- int err;
-
- err = file_remove_suid(out);
- if (unlikely(err))
- return err;
-
- ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
- if (ret > 0) {
- unsigned long nr_pages;
- *ppos += ret;
- nr_pages = (ret + PAGE_CACHE_SIZE - 1) >> PAGE_CACHE_SHIFT;
-
- /*
- * If file or inode is SYNC and we actually wrote some data,
- * sync it.
- */
- if (unlikely((out->f_flags & O_SYNC) || IS_SYNC(inode))) {
- err = generic_osync_inode(inode, mapping,
- OSYNC_METADATA|OSYNC_DATA);
+ pipe_lock(pipe);
- if (err)
- ret = err;
- }
- balance_dirty_pages_ratelimited_nr(mapping, nr_pages);
- }
+ splice_from_pipe_begin(&sd);
+ do {
+ ret = splice_from_pipe_next(pipe, &sd);
+ if (ret <= 0)
+ break;
- return ret;
-}
+ mutex_lock_nested(&inode->i_mutex, I_MUTEX_CHILD);
+ ret = file_remove_suid(out);
+ if (!ret)
+ ret = splice_from_pipe_feed(pipe, &sd, pipe_to_file);
+ mutex_unlock(&inode->i_mutex);
+ } while (ret > 0);
+ splice_from_pipe_end(pipe, &sd);
-EXPORT_SYMBOL(generic_file_splice_write_nolock);
+ pipe_unlock(pipe);
-/**
- * generic_file_splice_write - splice data from a pipe to a file
- * @pipe: pipe info
- * @out: file to write to
- * @ppos: position in @out
- * @len: number of bytes to splice
- * @flags: splice modifier flags
- *
- * Description:
- * Will either move or copy pages (determined by @flags options) from
- * the given pipe inode to the given file.
- *
- */
-ssize_t
-generic_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
- loff_t *ppos, size_t len, unsigned int flags)
-{
- struct address_space *mapping = out->f_mapping;
- struct inode *inode = mapping->host;
- struct splice_desc sd = {
- .total_len = len,
- .flags = flags,
- .pos = *ppos,
- .u.file = out,
- };
- ssize_t ret;
+ if (sd.num_spliced)
+ ret = sd.num_spliced;
- WARN_ON(S_ISFIFO(inode->i_mode));
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_PARENT);
- ret = file_remove_suid(out);
- if (likely(!ret)) {
- if (pipe->inode)
- mutex_lock_nested(&pipe->inode->i_mutex, I_MUTEX_CHILD);
- ret = __splice_from_pipe(pipe, &sd, pipe_to_file);
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
- }
- mutex_unlock(&inode->i_mutex);
if (ret > 0) {
unsigned long nr_pages;
if (!pipe)
return -EBADF;
- if (pipe->inode)
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
error = ret = 0;
while (nr_segs) {
iov++;
}
- if (pipe->inode)
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
if (!ret)
ret = error;
return 0;
ret = 0;
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
while (!pipe->nrbufs) {
if (signal_pending(current)) {
pipe_wait(pipe);
}
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
return ret;
}
return 0;
ret = 0;
- mutex_lock(&pipe->inode->i_mutex);
+ pipe_lock(pipe);
while (pipe->nrbufs >= PIPE_BUFFERS) {
if (!pipe->readers) {
pipe->waiting_writers--;
}
- mutex_unlock(&pipe->inode->i_mutex);
+ pipe_unlock(pipe);
return ret;
}
/*
* Potential ABBA deadlock, work around it by ordering lock
- * grabbing by inode address. Otherwise two different processes
+ * grabbing by pipe info address. Otherwise two different processes
* could deadlock (one doing tee from A -> B, the other from B -> A).
*/
- inode_double_lock(ipipe->inode, opipe->inode);
+ pipe_double_lock(ipipe, opipe);
do {
if (!opipe->readers) {
if (!ret && ipipe->waiting_writers && (flags & SPLICE_F_NONBLOCK))
ret = -EAGAIN;
- inode_double_unlock(ipipe->inode, opipe->inode);
+ pipe_unlock(ipipe);
+ pipe_unlock(opipe);
/*
* If we put data in the output pipe, wakeup any potential readers.
obj-$(CONFIG_SQUASHFS) += squashfs.o
squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
squashfs-y += namei.o super.o symlink.o
-#squashfs-y += squashfs2_0.o
cache->entries = entries;
cache->block_size = block_size;
cache->pages = block_size >> PAGE_CACHE_SHIFT;
+ cache->pages = cache->pages ? cache->pages : 1;
cache->name = name;
cache->num_waiters = 0;
spin_lock_init(&cache->lock);
if (msblk->block_size > SQUASHFS_FILE_MAX_SIZE)
goto failed_mount;
+ /*
+ * Check the system page size is not larger than the filesystem
+ * block size (by default 128K). This is currently not supported.
+ */
+ if (PAGE_CACHE_SIZE > msblk->block_size) {
+ ERROR("Page size > filesystem block size (%d). This is "
+ "currently not supported!\n", msblk->block_size);
+ goto failed_mount;
+ }
+
msblk->block_log = le16_to_cpu(sblk->block_log);
if (msblk->block_log > SQUASHFS_FILE_MAX_LOG)
goto failed_mount;
EXPORT_SYMBOL(vfs_getattr);
-int vfs_stat_fd(int dfd, char __user *name, struct kstat *stat)
+int vfs_fstat(unsigned int fd, struct kstat *stat)
{
- struct path path;
- int error;
+ struct file *f = fget(fd);
+ int error = -EBADF;
- error = user_path_at(dfd, name, LOOKUP_FOLLOW, &path);
- if (!error) {
- error = vfs_getattr(path.mnt, path.dentry, stat);
- path_put(&path);
+ if (f) {
+ error = vfs_getattr(f->f_path.mnt, f->f_path.dentry, stat);
+ fput(f);
}
return error;
}
+EXPORT_SYMBOL(vfs_fstat);
-int vfs_stat(char __user *name, struct kstat *stat)
+int vfs_fstatat(int dfd, char __user *filename, struct kstat *stat, int flag)
{
- return vfs_stat_fd(AT_FDCWD, name, stat);
-}
+ struct path path;
+ int error = -EINVAL;
+ int lookup_flags = 0;
-EXPORT_SYMBOL(vfs_stat);
+ if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
+ goto out;
-int vfs_lstat_fd(int dfd, char __user *name, struct kstat *stat)
-{
- struct path path;
- int error;
+ if (!(flag & AT_SYMLINK_NOFOLLOW))
+ lookup_flags |= LOOKUP_FOLLOW;
- error = user_path_at(dfd, name, 0, &path);
- if (!error) {
- error = vfs_getattr(path.mnt, path.dentry, stat);
- path_put(&path);
- }
+ error = user_path_at(dfd, filename, lookup_flags, &path);
+ if (error)
+ goto out;
+
+ error = vfs_getattr(path.mnt, path.dentry, stat);
+ path_put(&path);
+out:
return error;
}
+EXPORT_SYMBOL(vfs_fstatat);
-int vfs_lstat(char __user *name, struct kstat *stat)
+int vfs_stat(char __user *name, struct kstat *stat)
{
- return vfs_lstat_fd(AT_FDCWD, name, stat);
+ return vfs_fstatat(AT_FDCWD, name, stat, 0);
}
+EXPORT_SYMBOL(vfs_stat);
-EXPORT_SYMBOL(vfs_lstat);
-
-int vfs_fstat(unsigned int fd, struct kstat *stat)
+int vfs_lstat(char __user *name, struct kstat *stat)
{
- struct file *f = fget(fd);
- int error = -EBADF;
-
- if (f) {
- error = vfs_getattr(f->f_path.mnt, f->f_path.dentry, stat);
- fput(f);
- }
- return error;
+ return vfs_fstatat(AT_FDCWD, name, stat, AT_SYMLINK_NOFOLLOW);
}
+EXPORT_SYMBOL(vfs_lstat);
-EXPORT_SYMBOL(vfs_fstat);
#ifdef __ARCH_WANT_OLD_STAT
SYSCALL_DEFINE2(stat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_old_stat(&stat, statbuf);
+ error = vfs_stat(filename, &stat);
+ if (error)
+ return error;
- return error;
+ return cp_old_stat(&stat, statbuf);
}
SYSCALL_DEFINE2(lstat, char __user *, filename, struct __old_kernel_stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_old_stat(&stat, statbuf);
+ error = vfs_lstat(filename, &stat);
+ if (error)
+ return error;
- return error;
+ return cp_old_stat(&stat, statbuf);
}
SYSCALL_DEFINE2(fstat, unsigned int, fd, struct __old_kernel_stat __user *, statbuf)
SYSCALL_DEFINE2(newstat, char __user *, filename, struct stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_stat_fd(AT_FDCWD, filename, &stat);
-
- if (!error)
- error = cp_new_stat(&stat, statbuf);
+ int error = vfs_stat(filename, &stat);
- return error;
+ if (error)
+ return error;
+ return cp_new_stat(&stat, statbuf);
}
SYSCALL_DEFINE2(newlstat, char __user *, filename, struct stat __user *, statbuf)
{
struct kstat stat;
- int error = vfs_lstat_fd(AT_FDCWD, filename, &stat);
+ int error;
- if (!error)
- error = cp_new_stat(&stat, statbuf);
+ error = vfs_lstat(filename, &stat);
+ if (error)
+ return error;
- return error;
+ return cp_new_stat(&stat, statbuf);
}
#if !defined(__ARCH_WANT_STAT64) || defined(__ARCH_WANT_SYS_NEWFSTATAT)
struct stat __user *, statbuf, int, flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_new_stat(&stat, statbuf);
+ int error;
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_new_stat(&stat, statbuf);
}
#endif
struct stat64 __user *, statbuf, int, flag)
{
struct kstat stat;
- int error = -EINVAL;
-
- if ((flag & ~AT_SYMLINK_NOFOLLOW) != 0)
- goto out;
-
- if (flag & AT_SYMLINK_NOFOLLOW)
- error = vfs_lstat_fd(dfd, filename, &stat);
- else
- error = vfs_stat_fd(dfd, filename, &stat);
-
- if (!error)
- error = cp_new_stat64(&stat, statbuf);
+ int error;
-out:
- return error;
+ error = vfs_fstatat(dfd, filename, &stat, flag);
+ if (error)
+ return error;
+ return cp_new_stat64(&stat, statbuf);
}
#endif /* __ARCH_WANT_STAT64 */
EXPORT_SYMBOL(deactivate_super);
+/**
+ * deactivate_locked_super - drop an active reference to superblock
+ * @s: superblock to deactivate
+ *
+ * Equivalent of up_write(&s->s_umount); deactivate_super(s);, except that
+ * it does not unlock it until it's all over. As the result, it's safe to
+ * use to dispose of new superblock on ->get_sb() failure exits - nobody
+ * will see the sucker until it's all over. Equivalent using up_write +
+ * deactivate_super is safe for that purpose only if superblock is either
+ * safe to use or has NULL ->s_root when we unlock.
+ */
+void deactivate_locked_super(struct super_block *s)
+{
+ struct file_system_type *fs = s->s_type;
+ if (atomic_dec_and_lock(&s->s_active, &sb_lock)) {
+ s->s_count -= S_BIAS-1;
+ spin_unlock(&sb_lock);
+ vfs_dq_off(s, 0);
+ fs->kill_sb(s);
+ put_filesystem(fs);
+ put_super(s);
+ } else {
+ up_write(&s->s_umount);
+ }
+}
+
+EXPORT_SYMBOL(deactivate_locked_super);
+
/**
* grab_super - acquire an active reference
* @s: reference we are trying to make active
sb->s_flags = flags;
err = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (err) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return err;
}
if (s->s_root) {
if ((flags ^ s->s_flags) & MS_RDONLY) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = -EBUSY;
goto error_bdev;
}
sb_set_blocksize(s, block_size(bdev));
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto error;
}
struct block_device *bdev = sb->s_bdev;
fmode_t mode = sb->s_mode;
- bdev->bd_super = 0;
+ bdev->bd_super = NULL;
generic_shutdown_super(sb);
sync_blockdev(bdev);
close_bdev_exclusive(bdev, mode);
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return error;
}
s->s_flags |= MS_ACTIVE;
s->s_flags = flags;
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return error;
}
s->s_flags |= MS_ACTIVE;
return mnt;
out_sb:
dput(mnt->mnt_root);
- up_write(&mnt->mnt_sb->s_umount);
- deactivate_super(mnt->mnt_sb);
+ deactivate_locked_super(mnt->mnt_sb);
out_free_secdata:
free_secdata(secdata);
out_mnt:
count = size - offs;
}
- temp = kmalloc(count, GFP_KERNEL);
- if (!temp)
- return -ENOMEM;
-
- if (copy_from_user(temp, userbuf, count)) {
- count = -EFAULT;
- goto out_free;
- }
+ temp = memdup_user(userbuf, count);
+ if (IS_ERR(temp))
+ return PTR_ERR(temp);
mutex_lock(&bb->mutex);
if (count > 0)
*off = offs + count;
-out_free:
- kfree(temp);
return count;
}
if (buffer->event != atomic_read(&od->event))
goto trigger;
- return 0;
+ return DEFAULT_POLLMASK;
trigger:
buffer->needs_read_fill = 1;
- return POLLERR|POLLPRI;
+ return DEFAULT_POLLMASK|POLLERR|POLLPRI;
}
void sysfs_notify_dirent(struct sysfs_dirent *sd)
struct work_struct work;
};
+static struct workqueue_struct *sysfs_workqueue;
static DEFINE_MUTEX(sysfs_workq_mutex);
static LIST_HEAD(sysfs_workq);
static void sysfs_schedule_callback_work(struct work_struct *work)
mutex_lock(&sysfs_workq_mutex);
list_for_each_entry_safe(ss, tmp, &sysfs_workq, workq_list)
if (ss->kobj == kobj) {
+ module_put(owner);
mutex_unlock(&sysfs_workq_mutex);
return -EAGAIN;
}
mutex_unlock(&sysfs_workq_mutex);
+ if (sysfs_workqueue == NULL) {
+ sysfs_workqueue = create_workqueue("sysfsd");
+ if (sysfs_workqueue == NULL) {
+ module_put(owner);
+ return -ENOMEM;
+ }
+ }
+
ss = kmalloc(sizeof(*ss), GFP_KERNEL);
if (!ss) {
module_put(owner);
mutex_lock(&sysfs_workq_mutex);
list_add_tail(&ss->workq_list, &sysfs_workq);
mutex_unlock(&sysfs_workq_mutex);
- schedule_work(&ss->work);
+ queue_work(sysfs_workqueue, &ss->work);
return 0;
}
EXPORT_SYMBOL_GPL(sysfs_schedule_callback);
return 0;
out_deact:
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
out_close:
ubi_close_volume(ubi);
return err;
const struct file_operations ufs_dir_operations = {
.read = generic_read_dir,
.readdir = ufs_readdir,
- .fsync = file_fsync,
+ .fsync = ufs_sync_file,
.llseek = generic_file_llseek,
};
#include "ufs.h"
-static int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
+int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
{
struct inode *inode = dentry->d_inode;
int err;
/* file.c */
extern const struct inode_operations ufs_file_inode_operations;
extern const struct file_operations ufs_file_operations;
-
extern const struct address_space_operations ufs_aops;
+extern int ufs_sync_file(struct file *, struct dentry *, int);
/* ialloc.c */
extern void ufs_free_inode (struct inode *inode);
if (size) {
if (size > XATTR_SIZE_MAX)
return -E2BIG;
- kvalue = kmalloc(size, GFP_KERNEL);
- if (!kvalue)
- return -ENOMEM;
- if (copy_from_user(kvalue, value, size)) {
- kfree(kvalue);
- return -EFAULT;
- }
+ kvalue = memdup_user(value, size);
+ if (IS_ERR(kvalue))
+ return PTR_ERR(kvalue);
}
error = vfs_setxattr(d, kname, kvalue, size, flags);
return mp->m_ddev_targp->bt_bdev;
}
-/*
- * Schedule IO completion handling on a xfsdatad if this was
- * the final hold on this ioend. If we are asked to wait,
- * flush the workqueue.
- */
-STATIC void
-xfs_finish_ioend(
- xfs_ioend_t *ioend,
- int wait)
-{
- if (atomic_dec_and_test(&ioend->io_remaining)) {
- queue_work(xfsdatad_workqueue, &ioend->io_work);
- if (wait)
- flush_workqueue(xfsdatad_workqueue);
- }
-}
-
/*
* We're now finished for good with this ioend structure.
* Update the page state via the associated buffer_heads,
xfs_destroy_ioend(ioend);
}
+/*
+ * Schedule IO completion handling on a xfsdatad if this was
+ * the final hold on this ioend. If we are asked to wait,
+ * flush the workqueue.
+ */
+STATIC void
+xfs_finish_ioend(
+ xfs_ioend_t *ioend,
+ int wait)
+{
+ if (atomic_dec_and_test(&ioend->io_remaining)) {
+ struct workqueue_struct *wq = xfsdatad_workqueue;
+ if (ioend->io_work.func == xfs_end_bio_unwritten)
+ wq = xfsconvertd_workqueue;
+
+ queue_work(wq, &ioend->io_work);
+ if (wait)
+ flush_workqueue(wq);
+ }
+}
+
/*
* Allocate and initialise an IO completion structure.
* We need to track unwritten extent write completion here initially.
#define __XFS_AOPS_H__
extern struct workqueue_struct *xfsdatad_workqueue;
+extern struct workqueue_struct *xfsconvertd_workqueue;
extern mempool_t *xfs_ioend_pool;
/*
static struct workqueue_struct *xfslogd_workqueue;
struct workqueue_struct *xfsdatad_workqueue;
+struct workqueue_struct *xfsconvertd_workqueue;
#ifdef XFS_BUF_TRACE
void
xfs_buf_t *bp, *n;
int pincount = 0;
+ xfs_buf_runall_queues(xfsconvertd_workqueue);
xfs_buf_runall_queues(xfsdatad_workqueue);
xfs_buf_runall_queues(xfslogd_workqueue);
if (!xfsdatad_workqueue)
goto out_destroy_xfslogd_workqueue;
+ xfsconvertd_workqueue = create_workqueue("xfsconvertd");
+ if (!xfsconvertd_workqueue)
+ goto out_destroy_xfsdatad_workqueue;
+
register_shrinker(&xfs_buf_shake);
return 0;
+ out_destroy_xfsdatad_workqueue:
+ destroy_workqueue(xfsdatad_workqueue);
out_destroy_xfslogd_workqueue:
destroy_workqueue(xfslogd_workqueue);
out_free_buf_zone:
xfs_buf_terminate(void)
{
unregister_shrinker(&xfs_buf_shake);
+ destroy_workqueue(xfsconvertd_workqueue);
destroy_workqueue(xfsdatad_workqueue);
destroy_workqueue(xfslogd_workqueue);
kmem_zone_destroy(xfs_buf_zone);
if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY)) {
xfs_iflags_clear(ip, XFS_ITRUNCATED);
- ret = filemap_fdatawrite(mapping);
- if (flags & XFS_B_ASYNC)
- return -ret;
- ret2 = filemap_fdatawait(mapping);
- if (!ret)
- ret = ret2;
+ ret = -filemap_fdatawrite(mapping);
}
- return -ret;
+ if (flags & XFS_B_ASYNC)
+ return ret;
+ ret2 = xfs_wait_on_pages(ip, first, last);
+ if (!ret)
+ ret = ret2;
+ return ret;
}
int
if (len > XATTR_SIZE_MAX)
return EINVAL;
- kbuf = kmalloc(len, GFP_KERNEL);
- if (!kbuf)
- return ENOMEM;
-
- if (copy_from_user(kbuf, ubuf, len))
- goto out_kfree;
+ kbuf = memdup_user(ubuf, len);
+ if (IS_ERR(kbuf))
+ return PTR_ERR(kbuf);
error = xfs_attr_set(XFS_I(inode), name, kbuf, len, flags);
- out_kfree:
- kfree(kbuf);
return error;
}
if (!size || size > 16 * PAGE_SIZE)
goto out_dput;
- error = ENOMEM;
- ops = kmalloc(size, GFP_KERNEL);
- if (!ops)
+ ops = memdup_user(am_hreq.ops, size);
+ if (IS_ERR(ops)) {
+ error = PTR_ERR(ops);
goto out_dput;
-
- error = EFAULT;
- if (copy_from_user(ops, am_hreq.ops, size))
- goto out_kfree_ops;
+ }
attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
if (!attr_name)
goto out_kfree_ops;
-
error = 0;
for (i = 0; i < am_hreq.opcount; i++) {
ops[i].am_error = strncpy_from_user(attr_name,
if (!size || size > 16 * PAGE_SIZE)
goto out_dput;
- error = ENOMEM;
- ops = kmalloc(size, GFP_KERNEL);
- if (!ops)
+ ops = memdup_user(compat_ptr(am_hreq.ops), size);
+ if (IS_ERR(ops)) {
+ error = PTR_ERR(ops);
goto out_dput;
-
- error = EFAULT;
- if (copy_from_user(ops, compat_ptr(am_hreq.ops), size))
- goto out_kfree_ops;
+ }
attr_name = kmalloc(MAXNAMELEN, GFP_KERNEL);
if (!attr_name)
goto out_kfree_ops;
-
error = 0;
for (i = 0; i < am_hreq.opcount; i++) {
ops[i].am_error = strncpy_from_user(attr_name,
goto relock;
}
} else {
+ int enospc = 0;
+ ssize_t ret2 = 0;
+
+write_retry:
xfs_rw_enter_trace(XFS_WRITE_ENTER, xip, (void *)iovp, segs,
*offset, ioflags);
- ret = generic_file_buffered_write(iocb, iovp, segs,
+ ret2 = generic_file_buffered_write(iocb, iovp, segs,
pos, offset, count, ret);
+ /*
+ * if we just got an ENOSPC, flush the inode now we
+ * aren't holding any page locks and retry *once*
+ */
+ if (ret2 == -ENOSPC && !enospc) {
+ error = xfs_flush_pages(xip, 0, -1, 0, FI_NONE);
+ if (error)
+ goto out_unlock_internal;
+ enospc = 1;
+ goto write_retry;
+ }
+ ret = ret2;
}
current->backing_dev_info = NULL;
uint32_t first_index = 0;
int error = 0;
int last_error = 0;
- int fflag = XFS_B_ASYNC;
-
- if (flags & SYNC_DELWRI)
- fflag = XFS_B_DELWRI;
- if (flags & SYNC_WAIT)
- fflag = 0; /* synchronous overrides all */
do {
struct inode *inode;
* If we have to flush data or wait for I/O completion
* we need to hold the iolock.
*/
- if ((flags & SYNC_DELWRI) && VN_DIRTY(inode)) {
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- lock_flags |= XFS_IOLOCK_SHARED;
- error = xfs_flush_pages(ip, 0, -1, fflag, FI_NONE);
- if (flags & SYNC_IOWAIT)
+ if (flags & SYNC_DELWRI) {
+ if (VN_DIRTY(inode)) {
+ if (flags & SYNC_TRYLOCK) {
+ if (xfs_ilock_nowait(ip, XFS_IOLOCK_SHARED))
+ lock_flags |= XFS_IOLOCK_SHARED;
+ } else {
+ xfs_ilock(ip, XFS_IOLOCK_SHARED);
+ lock_flags |= XFS_IOLOCK_SHARED;
+ }
+ if (lock_flags & XFS_IOLOCK_SHARED) {
+ error = xfs_flush_pages(ip, 0, -1,
+ (flags & SYNC_WAIT) ? 0
+ : XFS_B_ASYNC,
+ FI_NONE);
+ }
+ }
+ if (VN_CACHED(inode) && (flags & SYNC_IOWAIT))
xfs_ioend_wait(ip);
}
xfs_ilock(ip, XFS_ILOCK_SHARED);
xfs_syncd_queue_work(
struct xfs_mount *mp,
void *data,
- void (*syncer)(struct xfs_mount *, void *))
+ void (*syncer)(struct xfs_mount *, void *),
+ struct completion *completion)
{
- struct bhv_vfs_sync_work *work;
+ struct xfs_sync_work *work;
- work = kmem_alloc(sizeof(struct bhv_vfs_sync_work), KM_SLEEP);
+ work = kmem_alloc(sizeof(struct xfs_sync_work), KM_SLEEP);
INIT_LIST_HEAD(&work->w_list);
work->w_syncer = syncer;
work->w_data = data;
work->w_mount = mp;
+ work->w_completion = completion;
spin_lock(&mp->m_sync_lock);
list_add_tail(&work->w_list, &mp->m_sync_list);
spin_unlock(&mp->m_sync_lock);
* heads, looking about for more room...
*/
STATIC void
-xfs_flush_inode_work(
- struct xfs_mount *mp,
- void *arg)
-{
- struct inode *inode = arg;
- filemap_flush(inode->i_mapping);
- iput(inode);
-}
-
-void
-xfs_flush_inode(
- xfs_inode_t *ip)
-{
- struct inode *inode = VFS_I(ip);
-
- igrab(inode);
- xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inode_work);
- delay(msecs_to_jiffies(500));
-}
-
-/*
- * This is the "bigger hammer" version of xfs_flush_inode_work...
- * (IOW, "If at first you don't succeed, use a Bigger Hammer").
- */
-STATIC void
-xfs_flush_device_work(
+xfs_flush_inodes_work(
struct xfs_mount *mp,
void *arg)
{
struct inode *inode = arg;
- sync_blockdev(mp->m_super->s_bdev);
+ xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK);
+ xfs_sync_inodes(mp, SYNC_DELWRI | SYNC_TRYLOCK | SYNC_IOWAIT);
iput(inode);
}
void
-xfs_flush_device(
+xfs_flush_inodes(
xfs_inode_t *ip)
{
struct inode *inode = VFS_I(ip);
+ DECLARE_COMPLETION_ONSTACK(completion);
igrab(inode);
- xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_device_work);
- delay(msecs_to_jiffies(500));
+ xfs_syncd_queue_work(ip->i_mount, inode, xfs_flush_inodes_work, &completion);
+ wait_for_completion(&completion);
xfs_log_force(ip->i_mount, (xfs_lsn_t)0, XFS_LOG_FORCE|XFS_LOG_SYNC);
}
{
struct xfs_mount *mp = arg;
long timeleft;
- bhv_vfs_sync_work_t *work, *n;
+ xfs_sync_work_t *work, *n;
LIST_HEAD (tmp);
set_freezable();
list_del(&work->w_list);
if (work == &mp->m_sync_work)
continue;
+ if (work->w_completion)
+ complete(work->w_completion);
kmem_free(work);
}
}
{
mp->m_sync_work.w_syncer = xfs_sync_worker;
mp->m_sync_work.w_mount = mp;
+ mp->m_sync_work.w_completion = NULL;
mp->m_sync_task = kthread_run(xfssyncd, mp, "xfssyncd");
if (IS_ERR(mp->m_sync_task))
return -PTR_ERR(mp->m_sync_task);
struct xfs_mount;
struct xfs_perag;
-typedef struct bhv_vfs_sync_work {
+typedef struct xfs_sync_work {
struct list_head w_list;
struct xfs_mount *w_mount;
void *w_data; /* syncer routine argument */
void (*w_syncer)(struct xfs_mount *, void *);
-} bhv_vfs_sync_work_t;
+ struct completion *w_completion;
+} xfs_sync_work_t;
#define SYNC_ATTR 0x0001 /* sync attributes */
#define SYNC_DELWRI 0x0002 /* look at delayed writes */
#define SYNC_WAIT 0x0004 /* wait for i/o to complete */
#define SYNC_BDFLUSH 0x0008 /* BDFLUSH is calling -- don't block */
#define SYNC_IOWAIT 0x0010 /* wait for all I/O to complete */
+#define SYNC_TRYLOCK 0x0020 /* only try to lock inodes */
int xfs_syncd_init(struct xfs_mount *mp);
void xfs_syncd_stop(struct xfs_mount *mp);
int xfs_quiesce_data(struct xfs_mount *mp);
void xfs_quiesce_attr(struct xfs_mount *mp);
-void xfs_flush_inode(struct xfs_inode *ip);
-void xfs_flush_device(struct xfs_inode *ip);
+void xfs_flush_inodes(struct xfs_inode *ip);
int xfs_reclaim_inode(struct xfs_inode *ip, int locked, int sync_mode);
int xfs_reclaim_inodes(struct xfs_mount *mp, int noblock, int mode);
void *arg) /* formatter arg */
{
__int64_t bmvend; /* last block requested */
- int error; /* return value */
+ int error = 0; /* return value */
__int64_t fixlen; /* length for -1 case */
int i; /* extent number */
int lock; /* lock state */
int nexleft; /* # of user extents left */
int subnex; /* # of bmapi's can do */
int nmap; /* number of map entries */
- struct getbmapx out; /* output structure */
+ struct getbmapx *out; /* output structure */
int whichfork; /* data or attr fork */
int prealloced; /* this is a file with
* preallocated data space */
int iflags; /* interface flags */
int bmapi_flags; /* flags for xfs_bmapi */
+ int cur_ext = 0;
mp = ip->i_mount;
iflags = bmv->bmv_iflags;
-
whichfork = iflags & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK;
- /* If the BMV_IF_NO_DMAPI_READ interface bit specified, do not
- * generate a DMAPI read event. Otherwise, if the DM_EVENT_READ
- * bit is set for the file, generate a read event in order
- * that the DMAPI application may do its thing before we return
- * the extents. Usually this means restoring user file data to
- * regions of the file that look like holes.
- *
- * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
- * BMV_IF_NO_DMAPI_READ so that read events are generated.
- * If this were not true, callers of ioctl( XFS_IOC_GETBMAP )
- * could misinterpret holes in a DMAPI file as true holes,
- * when in fact they may represent offline user data.
- */
- if ((iflags & BMV_IF_NO_DMAPI_READ) == 0 &&
- DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
- whichfork == XFS_DATA_FORK) {
- error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL);
- if (error)
- return XFS_ERROR(error);
- }
-
if (whichfork == XFS_ATTR_FORK) {
if (XFS_IFORK_Q(ip)) {
if (ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS &&
ip->i_mount);
return XFS_ERROR(EFSCORRUPTED);
}
- } else if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
- ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
- ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
- return XFS_ERROR(EINVAL);
- if (whichfork == XFS_DATA_FORK) {
+
+ prealloced = 0;
+ fixlen = 1LL << 32;
+ } else {
+ /*
+ * If the BMV_IF_NO_DMAPI_READ interface bit specified, do
+ * not generate a DMAPI read event. Otherwise, if the
+ * DM_EVENT_READ bit is set for the file, generate a read
+ * event in order that the DMAPI application may do its thing
+ * before we return the extents. Usually this means restoring
+ * user file data to regions of the file that look like holes.
+ *
+ * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
+ * BMV_IF_NO_DMAPI_READ so that read events are generated.
+ * If this were not true, callers of ioctl(XFS_IOC_GETBMAP)
+ * could misinterpret holes in a DMAPI file as true holes,
+ * when in fact they may represent offline user data.
+ */
+ if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
+ !(iflags & BMV_IF_NO_DMAPI_READ)) {
+ error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip,
+ 0, 0, 0, NULL);
+ if (error)
+ return XFS_ERROR(error);
+ }
+
+ if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
+ ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
+ ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
+ return XFS_ERROR(EINVAL);
+
if (xfs_get_extsz_hint(ip) ||
ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC|XFS_DIFLAG_APPEND)){
prealloced = 1;
prealloced = 0;
fixlen = ip->i_size;
}
- } else {
- prealloced = 0;
- fixlen = 1LL << 32;
}
if (bmv->bmv_length == -1) {
fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, fixlen));
- bmv->bmv_length = MAX( (__int64_t)(fixlen - bmv->bmv_offset),
- (__int64_t)0);
- } else if (bmv->bmv_length < 0)
- return XFS_ERROR(EINVAL);
- if (bmv->bmv_length == 0) {
+ bmv->bmv_length =
+ max_t(__int64_t, fixlen - bmv->bmv_offset, 0);
+ } else if (bmv->bmv_length == 0) {
bmv->bmv_entries = 0;
return 0;
+ } else if (bmv->bmv_length < 0) {
+ return XFS_ERROR(EINVAL);
}
+
nex = bmv->bmv_count - 1;
if (nex <= 0)
return XFS_ERROR(EINVAL);
bmvend = bmv->bmv_offset + bmv->bmv_length;
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- if (((iflags & BMV_IF_DELALLOC) == 0) &&
- (whichfork == XFS_DATA_FORK) &&
- (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size)) {
- /* xfs_fsize_t last_byte = xfs_file_last_byte(ip); */
- error = xfs_flush_pages(ip, (xfs_off_t)0,
- -1, 0, FI_REMAPF);
- if (error) {
- xfs_iunlock(ip, XFS_IOLOCK_SHARED);
- return error;
+ if (bmv->bmv_count > ULONG_MAX / sizeof(struct getbmapx))
+ return XFS_ERROR(ENOMEM);
+ out = kmem_zalloc(bmv->bmv_count * sizeof(struct getbmapx), KM_MAYFAIL);
+ if (!out)
+ return XFS_ERROR(ENOMEM);
+
+ xfs_ilock(ip, XFS_IOLOCK_SHARED);
+ if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) {
+ if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) {
+ error = xfs_flush_pages(ip, 0, -1, 0, FI_REMAPF);
+ if (error)
+ goto out_unlock_iolock;
}
- }
- ASSERT(whichfork == XFS_ATTR_FORK || (iflags & BMV_IF_DELALLOC) ||
- ip->i_delayed_blks == 0);
+ ASSERT(ip->i_delayed_blks == 0);
+ }
lock = xfs_ilock_map_shared(ip);
if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
- bmapi_flags = xfs_bmapi_aflag(whichfork) |
- ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE);
+ bmapi_flags = xfs_bmapi_aflag(whichfork);
+ if (!(iflags & BMV_IF_PREALLOC))
+ bmapi_flags |= XFS_BMAPI_IGSTATE;
/*
* Allocate enough space to handle "subnex" maps at a time.
*/
+ error = ENOMEM;
subnex = 16;
- map = kmem_alloc(subnex * sizeof(*map), KM_SLEEP);
+ map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL);
+ if (!map)
+ goto out_unlock_ilock;
bmv->bmv_entries = 0;
- if ((XFS_IFORK_NEXTENTS(ip, whichfork) == 0)) {
- if (((iflags & BMV_IF_DELALLOC) == 0) ||
- whichfork == XFS_ATTR_FORK) {
- error = 0;
- goto unlock_and_return;
- }
+ if (XFS_IFORK_NEXTENTS(ip, whichfork) == 0 &&
+ (whichfork == XFS_ATTR_FORK || !(iflags & BMV_IF_DELALLOC))) {
+ error = 0;
+ goto out_free_map;
}
nexleft = nex;
bmapi_flags, NULL, 0, map, &nmap,
NULL, NULL);
if (error)
- goto unlock_and_return;
+ goto out_free_map;
ASSERT(nmap <= subnex);
for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) {
- out.bmv_oflags = 0;
+ out[cur_ext].bmv_oflags = 0;
if (map[i].br_state == XFS_EXT_UNWRITTEN)
- out.bmv_oflags |= BMV_OF_PREALLOC;
+ out[cur_ext].bmv_oflags |= BMV_OF_PREALLOC;
else if (map[i].br_startblock == DELAYSTARTBLOCK)
- out.bmv_oflags |= BMV_OF_DELALLOC;
- out.bmv_offset = XFS_FSB_TO_BB(mp, map[i].br_startoff);
- out.bmv_length = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
- out.bmv_unused1 = out.bmv_unused2 = 0;
+ out[cur_ext].bmv_oflags |= BMV_OF_DELALLOC;
+ out[cur_ext].bmv_offset =
+ XFS_FSB_TO_BB(mp, map[i].br_startoff);
+ out[cur_ext].bmv_length =
+ XFS_FSB_TO_BB(mp, map[i].br_blockcount);
+ out[cur_ext].bmv_unused1 = 0;
+ out[cur_ext].bmv_unused2 = 0;
ASSERT(((iflags & BMV_IF_DELALLOC) != 0) ||
(map[i].br_startblock != DELAYSTARTBLOCK));
if (map[i].br_startblock == HOLESTARTBLOCK &&
whichfork == XFS_ATTR_FORK) {
/* came to the end of attribute fork */
- out.bmv_oflags |= BMV_OF_LAST;
- goto unlock_and_return;
- } else {
- int full = 0; /* user array is full */
-
- if (!xfs_getbmapx_fix_eof_hole(ip, &out,
- prealloced, bmvend,
- map[i].br_startblock)) {
- goto unlock_and_return;
- }
-
- /* format results & advance arg */
- error = formatter(&arg, &out, &full);
- if (error || full)
- goto unlock_and_return;
- nexleft--;
- bmv->bmv_offset =
- out.bmv_offset + out.bmv_length;
- bmv->bmv_length = MAX((__int64_t)0,
- (__int64_t)(bmvend - bmv->bmv_offset));
- bmv->bmv_entries++;
+ out[cur_ext].bmv_oflags |= BMV_OF_LAST;
+ goto out_free_map;
}
+
+ if (!xfs_getbmapx_fix_eof_hole(ip, &out[cur_ext],
+ prealloced, bmvend,
+ map[i].br_startblock))
+ goto out_free_map;
+
+ nexleft--;
+ bmv->bmv_offset =
+ out[cur_ext].bmv_offset +
+ out[cur_ext].bmv_length;
+ bmv->bmv_length =
+ max_t(__int64_t, 0, bmvend - bmv->bmv_offset);
+ bmv->bmv_entries++;
+ cur_ext++;
}
} while (nmap && nexleft && bmv->bmv_length);
-unlock_and_return:
+ out_free_map:
+ kmem_free(map);
+ out_unlock_ilock:
xfs_iunlock_map_shared(ip, lock);
+ out_unlock_iolock:
xfs_iunlock(ip, XFS_IOLOCK_SHARED);
- kmem_free(map);
+ for (i = 0; i < cur_ext; i++) {
+ int full = 0; /* user array is full */
+
+ /* format results & advance arg */
+ error = formatter(&arg, &out[i], &full);
+ if (error || full)
+ break;
+ }
return error;
}
ASSERT(!spin_is_locked(&ip->i_flags_lock));
ASSERT(completion_done(&ip->i_flush));
- /*
- * initialise the VFS inode here to get failures
- * out of the way early.
- */
- if (!inode_init_always(mp->m_super, VFS_I(ip))) {
- kmem_zone_free(xfs_inode_zone, ip);
- return NULL;
- }
-
/* initialise the xfs inode */
ip->i_ino = ino;
ip->i_mount = mp;
#ifdef XFS_DIR2_TRACE
ip->i_dir_trace = ktrace_alloc(XFS_DIR2_KTRACE_SIZE, KM_NOFS);
#endif
+ /*
+ * Now initialise the VFS inode. We do this after the xfs_inode
+ * initialisation as internal failures will result in ->destroy_inode
+ * being called and that will pass down through the reclaim path and
+ * free the XFS inode. This path requires the XFS inode to already be
+ * initialised. Hence if this call fails, the xfs_inode has already
+ * been freed and we should not reference it at all in the error
+ * handling.
+ */
+ if (!inode_init_always(mp->m_super, VFS_I(ip)))
+ return NULL;
+
+ /* prevent anyone from using this yet */
+ VFS_I(ip)->i_state = I_NEW|I_LOCK;
return ip;
}
* necessary.
*/
if (ip->i_df.if_flags & XFS_IFEXTENTS) {
+ xfs_ilock(ip, XFS_ILOCK_SHARED);
error = xfs_bmap_last_offset(NULL, ip, &last_block,
XFS_DATA_FORK);
+ xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (error) {
last_block = 0;
}
return 0;
}
-STATIC int
-xfs_flush_space(
- xfs_inode_t *ip,
- int *fsynced,
- int *ioflags)
-{
- switch (*fsynced) {
- case 0:
- if (ip->i_delayed_blks) {
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_flush_inode(ip);
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- *fsynced = 1;
- } else {
- *ioflags |= BMAPI_SYNC;
- *fsynced = 2;
- }
- return 0;
- case 1:
- *fsynced = 2;
- *ioflags |= BMAPI_SYNC;
- return 0;
- case 2:
- xfs_iunlock(ip, XFS_ILOCK_EXCL);
- xfs_flush_device(ip);
- xfs_ilock(ip, XFS_ILOCK_EXCL);
- *fsynced = 3;
- return 0;
- }
- return 1;
-}
-
STATIC int
xfs_cmn_err_fsblock_zero(
xfs_inode_t *ip,
}
/*
- * If the caller is doing a write at the end of the file,
- * then extend the allocation out to the file system's write
- * iosize. We clean up any extra space left over when the
- * file is closed in xfs_inactive().
- *
- * For sync writes, we are flushing delayed allocate space to
- * try to make additional space available for allocation near
- * the filesystem full boundary - preallocation hurts in that
- * situation, of course.
+ * If the caller is doing a write at the end of the file, then extend the
+ * allocation out to the file system's write iosize. We clean up any extra
+ * space left over when the file is closed in xfs_inactive().
*/
STATIC int
xfs_iomap_eof_want_preallocate(
int n, error, imaps;
*prealloc = 0;
- if ((ioflag & BMAPI_SYNC) || (offset + count) <= ip->i_size)
+ if ((offset + count) <= ip->i_size)
return 0;
/*
xfs_extlen_t extsz;
int nimaps;
xfs_bmbt_irec_t imap[XFS_WRITE_IMAPS];
- int prealloc, fsynced = 0;
+ int prealloc, flushed = 0;
int error;
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
extsz = xfs_get_extsz_hint(ip);
offset_fsb = XFS_B_TO_FSBT(mp, offset);
-retry:
error = xfs_iomap_eof_want_preallocate(mp, ip, offset, count,
ioflag, imap, XFS_WRITE_IMAPS, &prealloc);
if (error)
return error;
+retry:
if (prealloc) {
aligned_offset = XFS_WRITEIO_ALIGN(mp, (offset + count - 1));
ioalign = XFS_B_TO_FSBT(mp, aligned_offset);
/*
* If bmapi returned us nothing, and if we didn't get back EDQUOT,
- * then we must have run out of space - flush delalloc, and retry..
+ * then we must have run out of space - flush all other inodes with
+ * delalloc blocks and retry without EOF preallocation.
*/
if (nimaps == 0) {
xfs_iomap_enter_trace(XFS_IOMAP_WRITE_NOSPACE,
ip, offset, count);
- if (xfs_flush_space(ip, &fsynced, &ioflag))
+ if (flushed)
return XFS_ERROR(ENOSPC);
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
+ xfs_flush_inodes(ip);
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+
+ flushed = 1;
error = 0;
+ prealloc = 0;
goto retry;
}
BMAPI_IGNSTATE = (1 << 4), /* ignore unwritten state on read */
BMAPI_DIRECT = (1 << 5), /* direct instead of buffered write */
BMAPI_MMAP = (1 << 6), /* allocate for mmap write */
- BMAPI_SYNC = (1 << 7), /* sync write to flush delalloc space */
- BMAPI_TRYLOCK = (1 << 8), /* non-blocking request */
+ BMAPI_TRYLOCK = (1 << 7), /* non-blocking request */
} bmapi_flags_t;
}
mp->m_log = xlog_alloc_log(mp, log_target, blk_offset, num_bblks);
- if (!mp->m_log) {
- cmn_err(CE_WARN, "XFS: Log allocation failed: No memory!");
- error = ENOMEM;
+ if (IS_ERR(mp->m_log)) {
+ error = -PTR_ERR(mp->m_log);
goto out;
}
xfs_buf_t *bp;
int i;
int iclogsize;
+ int error = ENOMEM;
log = kmem_zalloc(sizeof(xlog_t), KM_MAYFAIL);
- if (!log)
- return NULL;
+ if (!log) {
+ xlog_warn("XFS: Log allocation failed: No memory!");
+ goto out;
+ }
log->l_mp = mp;
log->l_targ = log_target;
log->l_grant_reserve_cycle = 1;
log->l_grant_write_cycle = 1;
+ error = EFSCORRUPTED;
if (xfs_sb_version_hassector(&mp->m_sb)) {
log->l_sectbb_log = mp->m_sb.sb_logsectlog - BBSHIFT;
- ASSERT(log->l_sectbb_log <= mp->m_sectbb_log);
+ if (log->l_sectbb_log < 0 ||
+ log->l_sectbb_log > mp->m_sectbb_log) {
+ xlog_warn("XFS: Log sector size (0x%x) out of range.",
+ log->l_sectbb_log);
+ goto out_free_log;
+ }
+
/* for larger sector sizes, must have v2 or external log */
- ASSERT(log->l_sectbb_log == 0 ||
- log->l_logBBstart == 0 ||
- xfs_sb_version_haslogv2(&mp->m_sb));
- ASSERT(mp->m_sb.sb_logsectlog >= BBSHIFT);
+ if (log->l_sectbb_log != 0 &&
+ (log->l_logBBstart != 0 &&
+ !xfs_sb_version_haslogv2(&mp->m_sb))) {
+ xlog_warn("XFS: log sector size (0x%x) invalid "
+ "for configuration.", log->l_sectbb_log);
+ goto out_free_log;
+ }
+ if (mp->m_sb.sb_logsectlog < BBSHIFT) {
+ xlog_warn("XFS: Log sector log (0x%x) too small.",
+ mp->m_sb.sb_logsectlog);
+ goto out_free_log;
+ }
}
log->l_sectbb_mask = (1 << log->l_sectbb_log) - 1;
xlog_get_iclog_buffer_size(mp, log);
+ error = ENOMEM;
bp = xfs_buf_get_empty(log->l_iclog_size, mp->m_logdev_targp);
if (!bp)
goto out_free_log;
xfs_buf_free(log->l_xbuf);
out_free_log:
kmem_free(log);
- return NULL;
+out:
+ return ERR_PTR(-error);
} /* xlog_alloc_log */
xlog_ins_ticketq(&log->l_reserve_headq, tic);
xlog_trace_loggrant(log, tic,
"xlog_grant_log_space: sleep 2");
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_grant_log_space: wake 2");
- xlog_grant_push_ail(log->l_mp, need_bytes);
- spin_lock(&log->l_grant_lock);
goto redo;
} else if (tic->t_flags & XLOG_TIC_IN_Q)
xlog_del_ticketq(&log->l_reserve_headq, tic);
* for more free space, otherwise try to get some space for
* this transaction.
*/
-
+ need_bytes = tic->t_unit_res;
if ((ntic = log->l_write_headq)) {
free_bytes = xlog_space_left(log, log->l_grant_write_cycle,
log->l_grant_write_bytes);
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: sleep 1");
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT,
&log->l_grant_lock, s);
/* If we're shutting down, this tic is already
* off the queue */
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: wake 1");
- xlog_grant_push_ail(log->l_mp, tic->t_unit_res);
- spin_lock(&log->l_grant_lock);
}
}
- need_bytes = tic->t_unit_res;
-
redo:
if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
if (free_bytes < need_bytes) {
if ((tic->t_flags & XLOG_TIC_IN_Q) == 0)
xlog_ins_ticketq(&log->l_write_headq, tic);
+ spin_unlock(&log->l_grant_lock);
+ xlog_grant_push_ail(log->l_mp, need_bytes);
+ spin_lock(&log->l_grant_lock);
+
XFS_STATS_INC(xs_sleep_logspace);
sv_wait(&tic->t_wait, PINOD|PLTWAIT, &log->l_grant_lock, s);
/* If we're shutting down, this tic is already off the queue */
- if (XLOG_FORCED_SHUTDOWN(log)) {
- spin_lock(&log->l_grant_lock);
+ spin_lock(&log->l_grant_lock);
+ if (XLOG_FORCED_SHUTDOWN(log))
goto error_return;
- }
xlog_trace_loggrant(log, tic,
"xlog_regrant_write_log_space: wake 2");
- xlog_grant_push_ail(log->l_mp, need_bytes);
- spin_lock(&log->l_grant_lock);
goto redo;
} else if (tic->t_flags & XLOG_TIC_IN_Q)
xlog_del_ticketq(&log->l_write_headq, tic);
sbp->sb_sectsize > XFS_MAX_SECTORSIZE ||
sbp->sb_sectlog < XFS_MIN_SECTORSIZE_LOG ||
sbp->sb_sectlog > XFS_MAX_SECTORSIZE_LOG ||
+ sbp->sb_sectsize != (1 << sbp->sb_sectlog) ||
sbp->sb_blocksize < XFS_MIN_BLOCKSIZE ||
sbp->sb_blocksize > XFS_MAX_BLOCKSIZE ||
sbp->sb_blocklog < XFS_MIN_BLOCKSIZE_LOG ||
sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG ||
+ sbp->sb_blocksize != (1 << sbp->sb_blocklog) ||
sbp->sb_inodesize < XFS_DINODE_MIN_SIZE ||
sbp->sb_inodesize > XFS_DINODE_MAX_SIZE ||
sbp->sb_inodelog < XFS_DINODE_MIN_LOG ||
sbp->sb_inodelog > XFS_DINODE_MAX_LOG ||
+ sbp->sb_inodesize != (1 << sbp->sb_inodelog) ||
(sbp->sb_blocklog - sbp->sb_inodelog != sbp->sb_inopblog) ||
(sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE) ||
(sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE) ||
#endif
struct xfs_mru_cache *m_filestream; /* per-mount filestream data */
struct task_struct *m_sync_task; /* generalised sync thread */
- bhv_vfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */
+ xfs_sync_work_t m_sync_work; /* work item for VFS_SYNC */
struct list_head m_sync_list; /* sync thread work item list */
spinlock_t m_sync_lock; /* work item list lock */
int m_sync_seq; /* sync thread generation no. */
error = xfs_trans_reserve(tp, resblks, log_res, 0,
XFS_TRANS_PERM_LOG_RES, log_count);
if (error == ENOSPC) {
+ /* flush outstanding delalloc blocks and retry */
+ xfs_flush_inodes(dp);
+ error = xfs_trans_reserve(tp, resblks, XFS_CREATE_LOG_RES(mp), 0,
+ XFS_TRANS_PERM_LOG_RES, XFS_CREATE_LOG_COUNT);
+ }
+ if (error == ENOSPC) {
+ /* No space at all so try a "no-allocation" reservation */
resblks = 0;
error = xfs_trans_reserve(tp, 0, log_res, 0,
XFS_TRANS_PERM_LOG_RES, log_count);
struct acpi_processor_cx *state;
unsigned long bm_check_timestamp;
u32 default_state;
- u32 bm_activity;
int count;
struct acpi_processor_cx states[ACPI_PROCESSOR_MAX_POWER];
int timer_broadcast_on_state;
#if (defined CONFIG_ACPI_VIDEO || defined CONFIG_ACPI_VIDEO_MODULE)
extern int acpi_video_register(void);
+extern int acpi_video_exit(void);
#else
static inline int acpi_video_register(void) { return 0; }
+static inline void acpi_video_exit(void) { return; }
#endif
#endif
+++ /dev/null
-arch
-mach-types.h
#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
#define atomic_long_cmpxchg(l, old, new) \
- (atomic_cmpxchg((atomic64_t *)(l), (old), (new)))
+ (atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
#define atomic_long_xchg(v, new) \
- (atomic_xchg((atomic64_t *)(l), (new)))
+ (atomic64_xchg((atomic64_t *)(l), (new)))
#else /* BITS_PER_LONG == 64 */
*/
#ifndef __WARN
#ifndef __ASSEMBLY__
-extern void warn_slowpath(const char *file, const int line,
+extern void warn_slowpath_fmt(const char *file, const int line,
const char *fmt, ...) __attribute__((format(printf, 3, 4)));
+extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
#endif
-#define __WARN() warn_slowpath(__FILE__, __LINE__, NULL)
-#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg)
+#define __WARN() warn_slowpath_null(__FILE__, __LINE__)
+#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg)
#else
#define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0)
#endif
#else /* !CONFIG_BUG */
#ifndef HAVE_ARCH_BUG
-#define BUG()
+#define BUG() do {} while(0)
#endif
#ifndef HAVE_ARCH_BUG_ON
#ifndef _ASM_GENERIC_PERCPU_H_
#define _ASM_GENERIC_PERCPU_H_
+
#include <linux/compiler.h>
#include <linux/threads.h>
-
-/*
- * Determine the real variable name from the name visible in the
- * kernel sources.
- */
-#define per_cpu_var(var) per_cpu__##var
+#include <linux/percpu-defs.h>
#ifdef CONFIG_SMP
#endif /* SMP */
+#ifndef PER_CPU_BASE_SECTION
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
#ifndef PER_CPU_ATTRIBUTES
#define PER_CPU_ATTRIBUTES
#endif
-#define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \
- __typeof__(type) per_cpu_var(name)
-
#endif /* _ASM_GENERIC_PERCPU_H_ */
#define TRAP_TRACE (__SI_FAULT|2) /* process trace trap */
#define TRAP_BRANCH (__SI_FAULT|3) /* process taken branch trap */
#define TRAP_HWBKPT (__SI_FAULT|4) /* hardware breakpoint/watchpoint */
-#define NSIGTRAP 2
+#define NSIGTRAP 4
/*
* SIGCHLD si_codes
+#include <linux/section-names.h>
+
#ifndef LOAD_OFFSET
#define LOAD_OFFSET 0
#endif
/* .data section */
#define DATA_DATA \
*(.data) \
- *(.data.init.refok) \
*(.ref.data) \
DEV_KEEP(init.data) \
DEV_KEEP(exit.data) \
*(.text.hot) \
*(.text) \
*(.ref.text) \
- *(.text.init.refok) \
- *(.exit.text.refok) \
DEV_KEEP(init.text) \
DEV_KEEP(exit.text) \
CPU_KEEP(init.text) \
#endif
/* Section used for early init (in .S files) */
-#define HEAD_TEXT *(.head.text)
+#define HEAD_TEXT *(HEAD_TEXT_SECTION)
/* init and exit section handling */
#define INIT_DATA \
{0x8086, 0x2562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x3582, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x8086, 0x2572, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x8086, 0x358e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0, 0, 0}
#define gamma_PCI_IDS \
{0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+ {0x8086, 0x2e32, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa001, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0x8086, 0xa011, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
+ {0x8086, 0x35e8, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA << 8, 0xffff00, 0}, \
{0, 0, 0}
#define DRM_I915_GEM_GET_TILING 0x22
#define DRM_I915_GEM_GET_APERTURE 0x23
#define DRM_I915_GEM_MMAP_GTT 0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID 0x25
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
#define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
#define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
#define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_intel_get_pipe_from_crtc_id)
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
#define I915_BIT_6_SWIZZLE_9_10_11 4
/* Not seen by userland */
#define I915_BIT_6_SWIZZLE_UNKNOWN 5
+/* Seen by userland. */
+#define I915_BIT_6_SWIZZLE_9_17 6
+#define I915_BIT_6_SWIZZLE_9_10_17 7
struct drm_i915_gem_set_tiling {
/** Handle of the buffer to have its tiling state updated */
__u64 aper_available_size;
};
+struct drm_i915_get_pipe_from_crtc_id {
+ /** ID of CRTC being requested **/
+ __u32 crtc_id;
+
+ /** pipe of requested CRTC **/
+ __u32 pipe;
+};
+
#endif /* _I915_DRM_H_ */
header-y += radeonfb.h
header-y += raw.h
header-y += resource.h
+header-y += romfs_fs.h
header-y += rose.h
header-y += serial_reg.h
header-y += smbno.h
unifdef-y += reboot.h
unifdef-y += reiserfs_fs.h
unifdef-y += reiserfs_xattr.h
-unifdef-y += romfs_fs.h
unifdef-y += route.h
unifdef-y += rtc.h
unifdef-y += rtnetlink.h
int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base);
void acpi_irq_stats_init(void);
extern u32 acpi_irq_handled;
+extern u32 acpi_irq_not_handled;
extern struct acpi_mcfg_allocation *pci_mmcfg_config;
extern int pci_mmcfg_config_num;
return 0;
}
+static inline int ata_id_form_factor(const u16 *id)
+{
+ u16 val = id[168];
+
+ if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+ return 0;
+
+ val &= 0xf;
+
+ if (val > 5)
+ return 0;
+
+ return val;
+}
+
+static inline int ata_id_rotation_rate(const u16 *id)
+{
+ u16 val = id[217];
+
+ if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+ return 0;
+
+ if (val > 1 && val < 0x401)
+ return 0;
+
+ return val;
+}
+
static inline int ata_id_has_trim(const u16 *id)
{
if (ata_id_major_version(id) >= 7 &&
int hasvdso;
};
-extern int register_binfmt(struct linux_binfmt *);
+extern int __register_binfmt(struct linux_binfmt *fmt, int insert);
+
+/* Registration of default binfmt handlers */
+static inline int register_binfmt(struct linux_binfmt *fmt)
+{
+ return __register_binfmt(fmt, 0);
+}
+/* Same as above, but adds a new binfmt at the top of the list */
+static inline int insert_binfmt(struct linux_binfmt *fmt)
+{
+ return __register_binfmt(fmt, 1);
+}
+
extern void unregister_binfmt(struct linux_binfmt *);
extern int prepare_binprm(struct linux_binprm *);
* top 4 bits of bio flags indicate the pool this bio came from
*/
#define BIO_POOL_BITS (4)
+#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1)
#define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS)
#define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET)
#define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET)
return bio && bio->bi_io_vec != NULL;
}
+/*
+ * BIO list managment for use by remapping drivers (e.g. DM or MD).
+ *
+ * A bio_list anchors a singly-linked list of bios chained through the bi_next
+ * member of the bio. The bio_list also caches the last list member to allow
+ * fast access to the tail.
+ */
+struct bio_list {
+ struct bio *head;
+ struct bio *tail;
+};
+
+static inline int bio_list_empty(const struct bio_list *bl)
+{
+ return bl->head == NULL;
+}
+
+static inline void bio_list_init(struct bio_list *bl)
+{
+ bl->head = bl->tail = NULL;
+}
+
+#define bio_list_for_each(bio, bl) \
+ for (bio = (bl)->head; bio; bio = bio->bi_next)
+
+static inline unsigned bio_list_size(const struct bio_list *bl)
+{
+ unsigned sz = 0;
+ struct bio *bio;
+
+ bio_list_for_each(bio, bl)
+ sz++;
+
+ return sz;
+}
+
+static inline void bio_list_add(struct bio_list *bl, struct bio *bio)
+{
+ bio->bi_next = NULL;
+
+ if (bl->tail)
+ bl->tail->bi_next = bio;
+ else
+ bl->head = bio;
+
+ bl->tail = bio;
+}
+
+static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio)
+{
+ bio->bi_next = bl->head;
+
+ bl->head = bio;
+
+ if (!bl->tail)
+ bl->tail = bio;
+}
+
+static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2)
+{
+ if (!bl2->head)
+ return;
+
+ if (bl->tail)
+ bl->tail->bi_next = bl2->head;
+ else
+ bl->head = bl2->head;
+
+ bl->tail = bl2->tail;
+}
+
+static inline void bio_list_merge_head(struct bio_list *bl,
+ struct bio_list *bl2)
+{
+ if (!bl2->head)
+ return;
+
+ if (bl->head)
+ bl2->tail->bi_next = bl->head;
+ else
+ bl->tail = bl2->tail;
+
+ bl->head = bl2->head;
+}
+
+static inline struct bio *bio_list_pop(struct bio_list *bl)
+{
+ struct bio *bio = bl->head;
+
+ if (bio) {
+ bl->head = bl->head->bi_next;
+ if (!bl->head)
+ bl->tail = NULL;
+
+ bio->bi_next = NULL;
+ }
+
+ return bio;
+}
+
+static inline struct bio *bio_list_get(struct bio_list *bl)
+{
+ struct bio *bio = bl->head;
+
+ bl->head = bl->tail = NULL;
+
+ return bio;
+}
+
#if defined(CONFIG_BLK_DEV_INTEGRITY)
#define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)]))
return fls64(l);
}
+/**
+ * __ffs64 - find first set bit in a 64 bit word
+ * @word: The 64 bit word
+ *
+ * On 64 bit arches this is a synomyn for __ffs
+ * The result is not defined if no bits are set, so check that @word
+ * is non-zero before calling this.
+ */
+static inline unsigned long __ffs64(u64 word)
+{
+#if BITS_PER_LONG == 32
+ if (((u32)word) == 0UL)
+ return __ffs((u32)(word >> 32)) + 32;
+#elif BITS_PER_LONG != 64
+#error BITS_PER_LONG not 32 or 64
+#endif
+ return __ffs((unsigned long)word);
+}
+
#ifdef __KERNEL__
#ifdef CONFIG_GENERIC_FIND_FIRST_BIT
__REQ_COPY_USER, /* contains copies of user pages */
__REQ_INTEGRITY, /* integrity metadata has been remapped */
__REQ_NOIDLE, /* Don't anticipate more IO after this one */
+ __REQ_IO_STAT, /* account I/O stat */
__REQ_NR_BITS, /* stops here */
};
#define REQ_COPY_USER (1 << __REQ_COPY_USER)
#define REQ_INTEGRITY (1 << __REQ_INTEGRITY)
#define REQ_NOIDLE (1 << __REQ_NOIDLE)
+#define REQ_IO_STAT (1 << __REQ_IO_STAT)
#define BLK_MAX_CDB 16
blk_failfast_transport(rq) || \
blk_failfast_driver(rq))
#define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED)
+#define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT)
+#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET)
#define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq)))
unsigned long b_state);
void end_buffer_read_sync(struct buffer_head *bh, int uptodate);
void end_buffer_write_sync(struct buffer_head *bh, int uptodate);
+void end_buffer_async_write(struct buffer_head *bh, int uptodate);
/* Things to do with buffers at mapping->private_list */
void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode);
void block_invalidatepage(struct page *page, unsigned long offset);
int block_write_full_page(struct page *page, get_block_t *get_block,
struct writeback_control *wbc);
+int block_write_full_page_endio(struct page *page, get_block_t *get_block,
+ struct writeback_control *wbc, bh_end_io_t *handler);
int block_read_full_page(struct page*, get_block_t*);
int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc,
unsigned long from);
* 400-499: Perfect
* The ideal clocksource. A must-use where
* available.
- * @read: returns a cycle value
+ * @read: returns a cycle value, passes clocksource as argument
+ * @enable: optional function to enable the clocksource
+ * @disable: optional function to disable the clocksource
* @mask: bitmask for two's complement
* subtraction of non 64 bit counters
* @mult: cycle to nanosecond multiplier (adjusted by NTP)
char *name;
struct list_head list;
int rating;
- cycle_t (*read)(void);
+ cycle_t (*read)(struct clocksource *cs);
+ int (*enable)(struct clocksource *cs);
+ void (*disable)(struct clocksource *cs);
cycle_t mask;
u32 mult;
u32 mult_orig;
*/
static inline cycle_t clocksource_read(struct clocksource *cs)
{
- return cs->read();
+ return cs->read(cs);
+}
+
+/**
+ * clocksource_enable: - enable clocksource
+ * @cs: pointer to clocksource
+ *
+ * Enables the specified clocksource. The clocksource callback
+ * function should start up the hardware and setup mult and field
+ * members of struct clocksource to reflect hardware capabilities.
+ */
+static inline int clocksource_enable(struct clocksource *cs)
+{
+ return cs->enable ? cs->enable(cs) : 0;
+}
+
+/**
+ * clocksource_disable: - disable clocksource
+ * @cs: pointer to clocksource
+ *
+ * Disables the specified clocksource. The clocksource callback
+ * function should power down the now unused hardware block to
+ * save power.
+ */
+static inline void clocksource_disable(struct clocksource *cs)
+{
+ if (cs->disable)
+ cs->disable(cs);
}
/**
#include <linux/kernel.h>
#include <asm/atomic.h>
+#include <asm/system.h>
struct task_struct;
struct device_driver *driver; /* which driver has allocated this
device */
void *driver_data; /* data private to the driver */
-
- void *platform_data; /* We will remove platform_data
- field if all platform devices
- pass its platform specific data
- from platform_device->platform_data,
- other kind of devices should not
- use platform_data. */
+ void *platform_data; /* Platform specific data, device
+ core doesn't touch it */
struct dev_pm_info power;
#ifdef CONFIG_NUMA
extern struct device *get_device(struct device *dev);
extern void put_device(struct device *dev);
+extern void wait_for_device_probe(void);
/* drivers/base/power/shutdown.c */
extern void device_shutdown(void);
* dependency chains
* @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
* @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
+ * @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single
+ * (if not set, do the source dma-unmapping as page)
+ * @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single
+ * (if not set, do the destination dma-unmapping as page)
*/
enum dma_ctrl_flags {
DMA_PREP_INTERRUPT = (1 << 0),
DMA_CTRL_ACK = (1 << 1),
DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2),
DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
+ DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4),
+ DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5),
};
/**
DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \
if (__dynamic_dbg_enabled(descriptor)) \
dev_printk(KERN_DEBUG, dev, \
- KBUILD_MODNAME ": " pr_fmt(fmt),\
+ KBUILD_MODNAME ": " fmt, \
##__VA_ARGS__); \
} while (0)
/* Interpretation of offset for color fields: All offsets are from the right,
* inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you
* can use the offset as right argument to <<). A pixel afterwards is a bit
- * stream and is written to video memory as that unmodified. This implies
- * big-endian byte order if bits_per_pixel is greater than 8.
+ * stream and is written to video memory as that unmodified.
+ *
+ * For pseudocolor: offset and length should be the same for all color
+ * components. Offset specifies the position of the least significant bit
+ * of the pallette index in a pixel value. Length indicates the number
+ * of available palette entries (i.e. # of entries = 1 << length).
*/
struct fb_bitfield {
__u32 offset; /* beginning of bitfield */
#ifndef _LINUX_FIEMAP_H
#define _LINUX_FIEMAP_H
+#include <linux/types.h>
+
struct fiemap_extent {
__u64 fe_logical; /* logical offset in bytes for the start of
* the extent from the beginning of the file */
*/
#define FMODE_NOCMTIME ((__force fmode_t)2048)
+/*
+ * The below are the various read and write types that we support. Some of
+ * them include behavioral modifiers that send information down to the
+ * block layer and IO scheduler. Terminology:
+ *
+ * The block layer uses device plugging to defer IO a little bit, in
+ * the hope that we will see more IO very shortly. This increases
+ * coalescing of adjacent IO and thus reduces the number of IOs we
+ * have to send to the device. It also allows for better queuing,
+ * if the IO isn't mergeable. If the caller is going to be waiting
+ * for the IO, then he must ensure that the device is unplugged so
+ * that the IO is dispatched to the driver.
+ *
+ * All IO is handled async in Linux. This is fine for background
+ * writes, but for reads or writes that someone waits for completion
+ * on, we want to notify the block layer and IO scheduler so that they
+ * know about it. That allows them to make better scheduling
+ * decisions. So when the below references 'sync' and 'async', it
+ * is referencing this priority hint.
+ *
+ * With that in mind, the available types are:
+ *
+ * READ A normal read operation. Device will be plugged.
+ * READ_SYNC A synchronous read. Device is not plugged, caller can
+ * immediately wait on this read without caring about
+ * unplugging.
+ * READA Used for read-ahead operations. Lower priority, and the
+ * block layer could (in theory) choose to ignore this
+ * request if it runs into resource problems.
+ * WRITE A normal async write. Device will be plugged.
+ * SWRITE Like WRITE, but a special case for ll_rw_block() that
+ * tells it to lock the buffer first. Normally a buffer
+ * must be locked before doing IO.
+ * WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down
+ * the hint that someone will be waiting on this IO
+ * shortly. The device must still be unplugged explicitly,
+ * WRITE_SYNC_PLUG does not do this as we could be
+ * submitting more writes before we actually wait on any
+ * of them.
+ * WRITE_SYNC Like WRITE_SYNC_PLUG, but also unplugs the device
+ * immediately after submission. The write equivalent
+ * of READ_SYNC.
+ * WRITE_ODIRECT Special case write for O_DIRECT only.
+ * SWRITE_SYNC
+ * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer.
+ * See SWRITE.
+ * WRITE_BARRIER Like WRITE, but tells the block layer that all
+ * previously submitted writes must be safely on storage
+ * before this one is started. Also guarantees that when
+ * this write is complete, it itself is also safely on
+ * storage. Prevents reordering of writes on both sides
+ * of this IO.
+ *
+ */
#define RW_MASK 1
#define RWA_MASK 2
#define READ 0
(SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE))
#define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG))
#define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER))
+
+/*
+ * These aren't really reads or writes, they pass down information about
+ * parts of device that are now unused by the file system.
+ */
#define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD)
#define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER))
I_MUTEX_QUOTA
};
-extern void inode_double_lock(struct inode *inode1, struct inode *inode2);
-extern void inode_double_unlock(struct inode *inode1, struct inode *inode2);
-
/*
* NOTE: in a 32bit arch with a preemptable kernel and
* an UP compile the i_size_read/write must be atomic
void kill_anon_super(struct super_block *sb);
void kill_litter_super(struct super_block *sb);
void deactivate_super(struct super_block *sb);
+void deactivate_locked_super(struct super_block *sb);
int set_anon_super(struct super_block *s, void *data);
struct super_block *sget(struct file_system_type *type,
int (*test)(struct super_block *,void *),
extern void free_write_pipe(struct file *);
extern struct file *do_filp_open(int dfd, const char *pathname,
- int open_flag, int mode);
+ int open_flag, int mode, int acc_mode);
extern int may_open(struct path *, int, int);
extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
struct pipe_inode_info *, size_t, unsigned int);
extern ssize_t generic_file_splice_write(struct pipe_inode_info *,
struct file *, loff_t *, size_t, unsigned int);
-extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *,
- struct file *, loff_t *, size_t, unsigned int);
extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
struct file *out, loff_t *, size_t len, unsigned int flags);
extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
extern int vfs_stat(char __user *, struct kstat *);
extern int vfs_lstat(char __user *, struct kstat *);
-extern int vfs_stat_fd(int dfd, char __user *, struct kstat *);
-extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *);
extern int vfs_fstat(unsigned int, struct kstat *);
+extern int vfs_fstatat(int , char __user *, struct kstat *, int);
extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd,
unsigned long arg);
extern int generic_show_options(struct seq_file *m, struct vfsmount *mnt);
extern void save_mount_options(struct super_block *sb, char *options);
+extern void replace_mount_options(struct super_block *sb, char *options);
static inline ino_t parent_ino(struct dentry *dentry)
{
int proc_nr_files(struct ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos);
-int get_filesystem_list(char * buf);
+int __init get_filesystem_list(char *buf);
#endif /* __KERNEL__ */
#endif /* _LINUX_FS_H */
*
*/
-/* Flags related to I2C device features */
-#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001
-#define FSL_I2C_DEV_CLOCK_5200 0x00000002
-
enum fsl_usb2_operating_modes {
FSL_USB2_MPH_HOST,
FSL_USB2_DR_HOST,
u16 max_chipselect;
void (*cs_control)(struct spi_device *spi, bool on);
u32 sysclk;
+
+ /* Legacy hooks, used by mpc52xx_psc_spi driver. */
+ void (*activate_cs)(u8 cs, u8 polarity);
+ void (*deactivate_cs)(u8 cs, u8 polarity);
};
struct mpc8xx_pcmcia_ops {
#define DISK_PITER_REVERSE (1 << 0) /* iterate in the reverse direction */
#define DISK_PITER_INCL_EMPTY (1 << 1) /* include 0-sized parts */
#define DISK_PITER_INCL_PART0 (1 << 2) /* include partition 0 */
+#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */
struct disk_part_iter {
struct gendisk *disk;
#define _LINUX_INIT_H
#include <linux/compiler.h>
+#include <linux/section-names.h>
+#include <linux/stringify.h>
/* These macros are used to mark some functions or
* initialized data (doesn't apply to uninitialized data)
#define __refdata __section(.ref.data)
#define __refconst __section(.ref.rodata)
-/* backward compatibility note
- * A few places hardcode the old section names:
- * .text.init.refok
- * .data.init.refok
- * .exit.text.refok
- * They should be converted to use the defines from this file
- */
-
/* compatibility defines */
#define __init_refok __ref
#define __initdata_refok __refdata
#define __memexitconst __section(.memexit.rodata)
/* For assembly routines */
-#define __HEAD .section ".head.text","ax"
+#define __HEAD .section __stringify(HEAD_TEXT_SECTION),"ax"
#define __INIT .section ".init.text","ax"
#define __FINIT .previous
/* Relies on boot_command_line being set */
void __init parse_early_param(void);
+void __init parse_early_options(char *cmdline);
#endif /* __ASSEMBLY__ */
/**
extern struct files_struct init_files;
extern struct fs_struct init_fs;
-#define INIT_KIOCTX(name, which_mm) \
-{ \
- .users = ATOMIC_INIT(1), \
- .dead = 0, \
- .mm = &which_mm, \
- .user_id = 0, \
- .next = NULL, \
- .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \
- .ctx_lock = __SPIN_LOCK_UNLOCKED(name.ctx_lock), \
- .reqs_active = 0U, \
- .max_reqs = ~0U, \
-}
-
#define INIT_MM(name) \
{ \
.mm_rb = RB_ROOT, \
#define SYN_REPORT 0
#define SYN_CONFIG 1
+#define SYN_MT_REPORT 2
/*
* Keys and buttons
#define BTN_STYLUS2 0x14c
#define BTN_TOOL_DOUBLETAP 0x14d
#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
#define BTN_WHEEL 0x150
#define BTN_GEAR_DOWN 0x150
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
+
+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
#define BUS_GSC 0x1A
#define BUS_ATARI 0x1B
+/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER 0
+#define MT_TOOL_PEN 1
+
/*
* Values describing the status of a force-feedback effect
*/
input_event(dev, EV_SYN, SYN_REPORT, 0);
}
+static inline void input_mt_sync(struct input_dev *dev)
+{
+ input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
+}
+
void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
response. When you send a
response message, this will
be returned. */
+#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */
+
/* Note that async events and received commands do not have a completion
code as the first byte of the incoming data, unlike a response. */
#define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35
#define IPMI_GET_CHANNEL_INFO_CMD 0x42
+/* Bit for BMC global enables. */
+#define IPMI_BMC_RCV_MSG_INTR 0x01
+#define IPMI_BMC_EVT_MSG_INTR 0x02
+#define IPMI_BMC_EVT_MSG_BUFF 0x04
+#define IPMI_BMC_SYS_LOG 0x08
+
#define IPMI_NETFN_STORAGE_REQUEST 0x0a
#define IPMI_NETFN_STORAGE_RESPONSE 0x0b
#define IPMI_ADD_SEL_ENTRY_CMD 0x44
#define IPMI_CHANNEL_MEDIUM_USB1 10
#define IPMI_CHANNEL_MEDIUM_USB2 11
#define IPMI_CHANNEL_MEDIUM_SYSINTF 12
+#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60
+#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f
#endif /* __LINUX_IPMI_MSGDEFS_H */
extern int journal_revoke (handle_t *,
unsigned long, struct buffer_head *);
extern int journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void journal_write_revoke_records(journal_t *, transaction_t *);
+extern void journal_write_revoke_records(journal_t *,
+ transaction_t *, int);
/* Recovery revoke support */
extern int journal_set_revoke(journal_t *, unsigned long, tid_t);
extern void jbd2_journal_destroy_revoke(journal_t *);
extern int jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *);
extern int jbd2_journal_cancel_revoke(handle_t *, struct journal_head *);
-extern void jbd2_journal_write_revoke_records(journal_t *, transaction_t *);
+extern void jbd2_journal_write_revoke_records(journal_t *,
+ transaction_t *, int);
/* Recovery revoke support */
extern int jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t);
#define pr_cont(fmt, ...) \
printk(KERN_CONT fmt, ##__VA_ARGS__)
+/* pr_devel() should produce zero code unless DEBUG is defined */
+#ifdef DEBUG
+#define pr_devel(fmt, ...) \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
+#else
+#define pr_devel(fmt, ...) \
+ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
+#endif
+
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug(fmt, ...) \
#ifdef __KVM_HAVE_DEVICE_ASSIGNMENT
#define KVM_CAP_DEVICE_DEASSIGNMENT 27
#endif
+/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */
+#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30
#ifdef KVM_CAP_IRQ_ROUTING
/* bits 24:31 of ap->flags are reserved for LLD specific flags */
+
/* struct ata_port pflags */
ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */
ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */
ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */
ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */
+ ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */
+ ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */
+
/* struct ata_queued_cmd flags */
ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */
ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */
struct Scsi_Host *scsi_host; /* our co-allocated scsi host */
struct ata_port_operations *ops;
spinlock_t *lock;
+ /* Flags owned by the EH context. Only EH should touch these once the
+ port is active */
unsigned long flags; /* ATA_FLAG_xxx */
+ /* Flags that change dynamically, protected by ap->lock */
unsigned int pflags; /* ATA_PFLAG_xxx */
unsigned int print_id; /* user visible unique port ID */
unsigned int port_no; /* 0 based port no. inside the host */
extern void ata_sff_error_handler(struct ata_port *ap);
extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
extern int ata_sff_port_start(struct ata_port *ap);
+extern int ata_sff_port_start32(struct ata_port *ap);
extern void ata_sff_std_ports(struct ata_ioports *ioaddr);
extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev,
unsigned long xfer_mask);
enum lru_list from, enum lru_list to);
extern void mem_cgroup_uncharge_page(struct page *page);
extern void mem_cgroup_uncharge_cache_page(struct page *page);
-extern int mem_cgroup_shrink_usage(struct page *page,
+extern int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask);
extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
{
struct mem_cgroup *mem;
rcu_read_lock();
- mem = mem_cgroup_from_task((mm)->owner);
+ mem = mem_cgroup_from_task(rcu_dereference((mm)->owner));
rcu_read_unlock();
return cgroup == mem;
}
{
}
-static inline int mem_cgroup_shrink_usage(struct page *page,
+static inline int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask)
{
return 0;
#ifdef __KERNEL__
#include <linux/mm.h>
+#include <linux/percpu_counter.h>
#include <asm/atomic.h>
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
-extern atomic_long_t vm_committed_space;
+extern struct percpu_counter vm_committed_as;
-#ifdef CONFIG_SMP
-extern void vm_acct_memory(long pages);
-#else
static inline void vm_acct_memory(long pages)
{
- atomic_long_add(pages, &vm_committed_space);
+ percpu_counter_add(&vm_committed_as, pages);
}
-#endif
static inline void vm_unacct_memory(long pages)
{
extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
const char *, unsigned int, struct nameidata *);
-extern int path_lookup_open(int dfd, const char *name, unsigned lookup_flags, struct nameidata *, int open_flags);
extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
int (*open)(struct inode *, struct file *));
extern struct file *nameidata_to_filp(struct nameidata *nd, int flags);
return 0;
}
+/*
+ * nls_nullsize - return length of null character for codepage
+ * @codepage - codepage for which to return length of NULL terminator
+ *
+ * Since we can't guarantee that the null terminator will be a particular
+ * length, we have to check against the codepage. If there's a problem
+ * determining it, assume a single-byte NULL terminator.
+ */
+static inline int
+nls_nullsize(const struct nls_table *codepage)
+{
+ int charlen;
+ char tmp[NLS_MAX_CHARSET_SIZE];
+
+ charlen = codepage->uni2char(0, tmp, NLS_MAX_CHARSET_SIZE);
+
+ return charlen > 0 ? charlen : 1;
+}
+
#define MODULE_ALIAS_NLS(name) MODULE_ALIAS("nls_" __stringify(name))
#endif /* _LINUX_NLS_H */
struct bus_type *bus);
extern void of_unregister_driver(struct of_platform_driver *drv);
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+ return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+ of_unregister_driver(drv);
+}
+
#include <asm/of_platform.h>
extern struct of_device *of_find_device_by_node(struct device_node *np);
#define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433
#define PCI_DEVICE_ID_INTEL_82830_HB 0x3575
#define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577
+#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c
+#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e
#define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580
#define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582
#define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590
#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
+#define PCI_EXP_TYPE_RC_EC 0x10 /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
#define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */
#define PCI_EXP_DEVCAP 4 /* Device capabilities */
--- /dev/null
+#ifndef _LINUX_PERCPU_DEFS_H
+#define _LINUX_PERCPU_DEFS_H
+
+/*
+ * Determine the real variable name from the name visible in the
+ * kernel sources.
+ */
+#define per_cpu_var(var) per_cpu__##var
+
+/*
+ * Base implementations of per-CPU variable declarations and definitions, where
+ * the section in which the variable is to be placed is provided by the
+ * 'section' argument. This may be used to affect the parameters governing the
+ * variable's storage.
+ *
+ * NOTE! The sections for the DECLARE and for the DEFINE must match, lest
+ * linkage errors occur due the compiler generating the wrong code to access
+ * that section.
+ */
+#define DECLARE_PER_CPU_SECTION(type, name, section) \
+ extern \
+ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+#define DEFINE_PER_CPU_SECTION(type, name, section) \
+ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \
+ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+
+/*
+ * Variant on the per-CPU variable declaration/definition theme used for
+ * ordinary per-CPU variables.
+ */
+#define DECLARE_PER_CPU(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, "")
+
+#define DEFINE_PER_CPU(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, "")
+
+/*
+ * Declaration/definition used for per-CPU variables that must come first in
+ * the set of variables.
+ */
+#define DECLARE_PER_CPU_FIRST(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+#define DEFINE_PER_CPU_FIRST(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
+
+/*
+ * Declaration/definition used for per-CPU variables that must be cacheline
+ * aligned under SMP conditions so that, whilst a particular instance of the
+ * data corresponds to a particular CPU, inefficiencies due to direct access by
+ * other CPUs are reduced by preventing the data from unnecessarily spanning
+ * cachelines.
+ *
+ * An example of this would be statistical data, where each CPU's set of data
+ * is updated by that CPU alone, but the data from across all CPUs is collated
+ * by a CPU processing a read from a proc file.
+ */
+#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+ ____cacheline_aligned_in_smp
+
+#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
+ ____cacheline_aligned_in_smp
+
+/*
+ * Declaration/definition used for per-CPU variables that must be page aligned.
+ */
+#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \
+ DECLARE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
+ DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
+
+/*
+ * Intermodule exports for per-CPU variables.
+ */
+#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
+#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
+
+
+#endif /* _LINUX_PERCPU_DEFS_H */
#include <asm/percpu.h>
-#ifndef PER_CPU_BASE_SECTION
-#ifdef CONFIG_SMP
-#define PER_CPU_BASE_SECTION ".data.percpu"
-#else
-#define PER_CPU_BASE_SECTION ".data"
-#endif
-#endif
-
-#ifdef CONFIG_SMP
-
-#ifdef MODULE
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#else
-#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
-#endif
-#define PER_CPU_FIRST_SECTION ".first"
-
-#else
-
-#define PER_CPU_SHARED_ALIGNED_SECTION ""
-#define PER_CPU_FIRST_SECTION ""
-
-#endif
-
-#define DEFINE_PER_CPU_SECTION(type, name, section) \
- __attribute__((__section__(PER_CPU_BASE_SECTION section))) \
- PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
-
-#define DEFINE_PER_CPU(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, "")
-
-#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \
- ____cacheline_aligned_in_smp
-
-#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, ".page_aligned")
-
-#define DEFINE_PER_CPU_FIRST(type, name) \
- DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION)
-
-#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var)
-#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var)
-
/* enough to cover all DEFINE_PER_CPUs in modules */
#ifdef CONFIG_MODULES
#define PERCPU_MODULE_RESERVE (8 << 10)
memory allocation, whereas PIPE_BUF makes atomicity guarantees. */
#define PIPE_SIZE PAGE_SIZE
+/* Pipe lock and unlock operations */
+void pipe_lock(struct pipe_inode_info *);
+void pipe_unlock(struct pipe_inode_info *);
+void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *);
+
/* Drop the inode semaphore and wait for a pipe event, atomically */
void pipe_wait(struct pipe_inode_info *pipe);
#include <linux/cdrom.h>
#include <linux/kobject.h>
#include <linux/sysfs.h>
+#include <linux/mempool.h>
/* default bio write queue congestion marks */
#define PKT_WRITE_CONGESTION_ON 10000
struct device dev;
u32 num_resources;
struct resource * resource;
- void *platform_data;
struct platform_device_id *id_entry;
};
#define platform_get_drvdata(_dev) dev_get_drvdata(&(_dev)->dev)
#define platform_set_drvdata(_dev,data) dev_set_drvdata(&(_dev)->dev, (data))
+/* early platform driver interface */
+struct early_platform_driver {
+ const char *class_str;
+ struct platform_driver *pdrv;
+ struct list_head list;
+ int requested_id;
+};
+
+#define EARLY_PLATFORM_ID_UNSET -2
+#define EARLY_PLATFORM_ID_ERROR -3
+
+extern int early_platform_driver_register(struct early_platform_driver *epdrv,
+ char *buf);
+extern void early_platform_add_devices(struct platform_device **devs, int num);
+
+static inline int is_early_platform_device(struct platform_device *pdev)
+{
+ return !pdev->dev.driver;
+}
+
+extern void early_platform_driver_register_all(char *class_str);
+extern int early_platform_driver_probe(char *class_str,
+ int nr_probe, int user_only);
+extern void early_platform_cleanup(void);
+
+
+#ifndef MODULE
+#define early_platform_init(class_string, platform_driver) \
+static __initdata struct early_platform_driver early_driver = { \
+ .class_str = class_string, \
+ .pdrv = platform_driver, \
+ .requested_id = EARLY_PLATFORM_ID_UNSET, \
+}; \
+static int __init early_platform_driver_setup_func(char *buf) \
+{ \
+ return early_platform_driver_register(&early_driver, buf); \
+} \
+early_param(class_string, early_platform_driver_setup_func)
+#else /* MODULE */
+#define early_platform_init(class_string, platform_driver)
+#endif /* MODULE */
+
#endif /* _PLATFORM_DEVICE_H_ */
unsigned long offline_fqs; /* Kicked due to being offline. */
unsigned long resched_ipi; /* Sent a resched IPI. */
- /* 5) state to allow this CPU to force_quiescent_state on others */
+ /* 5) For future __rcu_pending statistics. */
long n_rcu_pending; /* rcu_pending() calls since boot. */
- long n_rcu_pending_force_qs; /* when to force quiescent states. */
int cpu;
};
* @set_current_limit: Configure a limit for a current-limited regulator.
* @get_current_limit: Get the configured limit for a current-limited regulator.
*
+ * @set_mode: Set the configured operating mode for the regulator.
* @get_mode: Get the configured operating mode for the regulator.
* @get_status: Return actual (not as-configured) status of regulator, as a
* REGULATOR_STATUS value (or negative errno)
atomic_t j_wcount; /* count of writers for current commit */
unsigned long j_bcount; /* batch count. allows turning X transactions into 1 */
unsigned long j_first_unflushed_offset; /* first unflushed transactions offset */
- unsigned long j_last_flush_trans_id; /* last fully flushed journal timestamp */
+ unsigned j_last_flush_trans_id; /* last fully flushed journal timestamp */
struct buffer_head *j_header_bh;
time_t j_trans_start_time; /* time this transaction started */
int reserved_blocks; /* amount of blocks reserved for further allocations */
spinlock_t bitmap_lock; /* this lock on now only used to protect reserved_blocks variable */
struct dentry *priv_root; /* root of /.reiserfs_priv */
- struct dentry *xattr_root; /* root of /.reiserfs_priv/.xa */
+ struct dentry *xattr_root; /* root of /.reiserfs_priv/xattrs */
int j_errno;
#ifdef CONFIG_QUOTA
char *s_qf_names[MAXQUOTAS];
#define reiserfs_data_log(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_LOG))
#define reiserfs_data_ordered(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_ORDERED))
#define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK))
-#define reiserfs_xattrs(s) ((s)->s_xattr != NULL)
#define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER))
#define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL))
#define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s))
int reiserfs_xattr_register_handlers(void) __init;
void reiserfs_xattr_unregister_handlers(void);
int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
+int reiserfs_lookup_privroot(struct super_block *sb);
int reiserfs_delete_xattrs(struct inode *inode);
int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
if ((REISERFS_I(inode)->i_flags & i_has_xattr_dir) == 0) {
nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
- if (REISERFS_SB(inode->i_sb)->xattr_root == NULL)
+ if (!REISERFS_SB(inode->i_sb)->xattr_root->d_inode)
nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
}
#define ROMFH_PAD (ROMFH_SIZE-1)
#define ROMFH_MASK (~ROMFH_PAD)
-#ifdef __KERNEL__
-
-/* Not much now */
-
-#endif /* __KERNEL__ */
#endif
#else /* CONFIG_SECCOMP */
+#include <linux/errno.h>
+
typedef struct { } seccomp_t;
#define secure_computing(x) do { } while (0)
--- /dev/null
+#ifndef __LINUX_SECTION_NAMES_H
+#define __LINUX_SECTION_NAMES_H
+
+#define HEAD_TEXT_SECTION .head.text
+
+#endif /* !__LINUX_SECTION_NAMES_H */
--- /dev/null
+/*
+ * sht15.h - support for the SHT15 Temperature and Humidity Sensor
+ *
+ * Copyright (c) 2009 Jonathan Cameron
+ *
+ * Copyright (c) 2007 Wouter Horre
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/**
+ * struct sht15_platform_data - sht15 connectivity info
+ * @gpio_data: no. of gpio to which bidirectional data line is connected
+ * @gpio_sck: no. of gpio to which the data clock is connected.
+ * @supply_mv: supply voltage in mv. Overridden by regulator if available.
+ **/
+struct sht15_platform_data {
+ int gpio_data;
+ int gpio_sck;
+ int supply_mv;
+};
+
}
/**
- * slow_work_init - Initialise a very slow work item
+ * vslow_work_init - Initialise a very slow work item
* @work: The work item to initialise
* @ops: The operations to use to handle the slow work item
*
void **filter_data);
int (*filter) (void *filter_data, int data_idx, int *val);
void (*filter_cleanup)(void *filter_data);
+ void (*wait_for_sync)(void);
};
*/
u16 dma_alignment;
- /* setup mode and clock, etc (spi driver may call many times) */
+ /* Setup mode and clock, etc (spi driver may call many times).
+ *
+ * IMPORTANT: this may be called when transfers to another
+ * device are active. DO NOT UPDATE SHARED REGISTERS in ways
+ * which could break those transfers.
+ */
int (*setup)(struct spi_device *spi);
/* bidirectional bulk transfers
void *data; /* cookie */
} u;
loff_t pos; /* file position */
+ size_t num_spliced; /* number of bytes already spliced */
+ bool need_wakeup; /* need to wake up writer */
};
struct partial_page {
splice_actor *);
extern ssize_t __splice_from_pipe(struct pipe_inode_info *,
struct splice_desc *, splice_actor *);
+extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *,
+ splice_actor *);
+extern int splice_from_pipe_next(struct pipe_inode_info *,
+ struct splice_desc *);
+extern void splice_from_pipe_begin(struct splice_desc *);
+extern void splice_from_pipe_end(struct pipe_inode_info *,
+ struct splice_desc *);
+extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *,
+ struct splice_desc *);
+
extern ssize_t splice_to_pipe(struct pipe_inode_info *,
struct splice_pipe_desc *);
extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *,
#define XPRT_BINDING (5)
#define XPRT_CLOSING (6)
#define XPRT_CONNECTION_ABORT (7)
+#define XPRT_CONNECTION_CLOSE (8)
static inline void xprt_set_connected(struct rpc_xprt *xprt)
{
* by @begin().
* @prepare() is called right after devices have been suspended (ie. the
* appropriate .suspend() method has been executed for each device) and
- * before the nonboot CPUs are disabled (it is executed with IRQs enabled).
- * This callback is optional. It returns 0 on success or a negative
- * error code otherwise, in which case the system cannot enter the desired
- * sleep state (@enter() and @finish() will not be called in that case).
+ * before device drivers' late suspend callbacks are executed. It returns
+ * 0 on success or a negative error code otherwise, in which case the
+ * system cannot enter the desired sleep state (@prepare_late(), @enter(),
+ * @wake(), and @finish() will not be called in that case).
+ *
+ * @prepare_late: Finish preparing the platform for entering the system sleep
+ * state indicated by @begin().
+ * @prepare_late is called before disabling nonboot CPUs and after
+ * device drivers' late suspend callbacks have been executed. It returns
+ * 0 on success or a negative error code otherwise, in which case the
+ * system cannot enter the desired sleep state (@enter() and @wake()).
*
* @enter: Enter the system sleep state indicated by @begin() or represented by
* the argument if @begin() is not implemented.
* error code otherwise, in which case the system cannot enter the desired
* sleep state.
*
- * @finish: Called when the system has just left a sleep state, right after
- * the nonboot CPUs have been enabled and before devices are resumed (it is
- * executed with IRQs enabled).
+ * @wake: Called when the system has just left a sleep state, right after
+ * the nonboot CPUs have been enabled and before device drivers' early
+ * resume callbacks are executed.
+ * This callback is optional, but should be implemented by the platforms
+ * that implement @prepare_late(). If implemented, it is always called
+ * after @enter(), even if @enter() fails.
+ *
+ * @finish: Finish wake-up of the platform.
+ * @finish is called right prior to calling device drivers' regular suspend
+ * callbacks.
* This callback is optional, but should be implemented by the platforms
* that implement @prepare(). If implemented, it is always called after
- * @enter() (even if @enter() fails).
+ * @enter() and @wake(), if implemented, even if any of them fails.
*
* @end: Called by the PM core right after resuming devices, to indicate to
* the platform that the system has returned to the working state or
* the transition to the sleep state has been aborted.
* This callback is optional, but should be implemented by the platforms
- * that implement @begin(), but platforms implementing @begin() should
- * also provide a @end() which cleans up transitions aborted before
+ * that implement @begin(). Accordingly, platforms implementing @begin()
+ * should also provide a @end() which cleans up transitions aborted before
* @enter().
*
* @recover: Recover the platform from a suspend failure.
int (*valid)(suspend_state_t state);
int (*begin)(suspend_state_t state);
int (*prepare)(void);
+ int (*prepare_late)(void);
int (*enter)(suspend_state_t state);
+ void (*wake)(void);
void (*finish)(void);
void (*end)(void);
void (*recover)(void);
asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \
"\t.globl ." #alias "\n\t.set ." #alias ", ." #name)
#else
-#ifdef CONFIG_ALPHA
+#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS)
#define SYSCALL_ALIAS(alias, name) \
asm ( #alias " = " #name "\n\t.globl " #alias)
#else
asmlinkage long sys_fcntl64(unsigned int fd,
unsigned int cmd, unsigned long arg);
#endif
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
asmlinkage long sys_dup(unsigned int fildes);
asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags);
extern int usb_clear_halt(struct usb_device *dev, int pipe);
extern int usb_reset_configuration(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
/* this request isn't really synchronous, but it belongs with the others */
extern int usb_driver_set_configuration(struct usb_device *udev, int config);
#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
- ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
- ((bit) << (ep)))
-
-
static inline unsigned int __create_pipe(struct usb_device *dev,
unsigned int endpoint)
{
* key configuration differences between boards.
*/
+#ifndef __LINUX_USB_MUSB_H
+#define __LINUX_USB_MUSB_H
+
/* The USB role is defined by the connector used on the board, so long as
* standards are being followed. (Developer boards sometimes won't.)
*/
extern int tusb6010_platform_retime(unsigned is_refclk);
#endif /* OMAP2 */
+
+#endif /* __LINUX_USB_MUSB_H */
/**
* usb_serial_port: structure for the specific ports of a device.
* @serial: pointer back to the struct usb_serial owner of this port.
- * @tty: pointer to the corresponding tty for this port.
+ * @port: pointer to the corresponding tty_port for this port.
* @lock: spinlock to grab when updating portions of this structure.
* @mutex: mutex used to synchronize serial_open() and serial_close()
* access for this port.
* @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe
* for this port.
* @bulk_in_buffer: pointer to the bulk in buffer for this port.
+ * @bulk_in_size: the size of the bulk_in_buffer, in bytes.
* @read_urb: pointer to the bulk in struct urb for this port.
* @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this
* port.
* @bulk_out_buffer: pointer to the bulk out buffer for this port.
* @bulk_out_size: the size of the bulk_out_buffer, in bytes.
* @write_urb: pointer to the bulk out struct urb for this port.
+ * @write_urb_busy: port`s writing status
* @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this
* port.
* @write_wait: a wait_queue_head_t used by the port.
* @work: work queue entry for the line discipline waking up.
- * @open_count: number of times this port has been opened.
* @throttled: nonzero if the read urb is inactive to throttle the device
* @throttle_req: nonzero if the tty wants to throttle us
+ * @console: attached usb serial console
+ * @dev: pointer to the serial device
*
* This structure is used by the usb-serial core and drivers for the specific
* ports of a device.
/* pdflush.c */
extern int nr_pdflush_threads; /* Global so it can be exported to sysctl
read-only. */
-extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
-extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
#endif /* WRITEBACK_H */
struct p9_req_t {
int status;
int t_err;
- u16 flush_tag;
wait_queue_head_t *wq;
struct p9_fcall *tc;
struct p9_fcall *rc;
* Well-known fabric addresses.
*/
enum fc_well_known_fid {
+ FC_FID_NONE = 0x000000, /* No destination */
FC_FID_BCAST = 0xffffff, /* broadcast */
FC_FID_FLOGI = 0xfffffe, /* fabric login */
FC_FID_FCTRL = 0xfffffd, /* fabric controller */
enum fc_disc_event);
struct list_head rports;
+ struct list_head rogue_rports;
struct fc_lport *lport;
struct mutex disc_mutex;
struct fc_gpn_ft_resp partial_buf; /* partial name buffer */
struct scsi_host_template;
struct scsi_device;
struct Scsi_Host;
+struct scsi_target;
struct scsi_cmnd;
struct socket;
struct iscsi_transport;
bool xmit_can_sleep);
extern void iscsi_host_remove(struct Scsi_Host *shost);
extern void iscsi_host_free(struct Scsi_Host *shost);
+extern int iscsi_target_alloc(struct scsi_target *starget);
/*
* session management
OSDv1_ADDITIONAL_CDB_LENGTH = 192,
OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8,
OSDv1_CAP_LEN = 80,
+
/* Latest supported version */
-/* OSD_ADDITIONAL_CDB_LENGTH = 216,*/
+ OSDv2_ADDITIONAL_CDB_LENGTH = 228,
OSD_ADDITIONAL_CDB_LENGTH =
- OSDv1_ADDITIONAL_CDB_LENGTH, /* FIXME: Pete rev-001 sup */
+ OSDv2_ADDITIONAL_CDB_LENGTH,
OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8,
-/* OSD_CAP_LEN = 104,*/
- OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */
+ OSD_CAP_LEN = 104,
OSD_SYSTEMID_LEN = 20,
- OSD_CRYPTO_KEYID_SIZE = 20,
- /*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/
+ OSDv1_CRYPTO_KEYID_SIZE = 20,
+ OSDv2_CRYPTO_KEYID_SIZE = 32,
+ OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE,
OSD_CRYPTO_SEED_SIZE = 4,
OSD_CRYPTO_NONCE_SIZE = 12,
OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */
/* called allocation_length in some commands */
/*32*/ __be64 length;
/*40*/ __be64 start_address;
-/*48*/ __be32 list_identifier;/* Rarely used */
+ union {
+/*48*/ __be32 list_identifier;/* Rarely used */
+ /* OSD2r05 5.2.5 CDB continuation length */
+/*48*/ __be32 cdb_continuation_length;
+ };
} __packed v2;
};
/*52*/ union { /* selected attributes mode Page/List/Single */
/*80*/
/*160 v1*/
-/*184 v2*/
-struct osd_security_parameters {
-/*160*/u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+struct osdv1_security_parameters {
+/*160*/u8 integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE];
/*180*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE];
/*192*/osd_cdb_offset data_in_integrity_check_offset;
/*196*/osd_cdb_offset data_out_integrity_check_offset;
} __packed;
/*200 v1*/
-/*224 v2*/
-/* FIXME: osdv2_security_parameters */
+/*184 v2*/
+struct osdv2_security_parameters {
+/*184*/u8 integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE];
+/*216*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE];
+/*228*/osd_cdb_offset data_in_integrity_check_offset;
+/*232*/osd_cdb_offset data_out_integrity_check_offset;
+} __packed;
+/*236 v2*/
+
+struct osd_security_parameters {
+ union {
+ struct osdv1_security_parameters v1;
+ struct osdv2_security_parameters v2;
+ };
+};
struct osdv1_cdb {
struct osd_cdb_head h;
u8 caps[OSDv1_CAP_LEN];
- struct osd_security_parameters sec_params;
+ struct osdv1_security_parameters sec_params;
} __packed;
struct osdv2_cdb {
struct osd_cdb_head h;
u8 caps[OSD_CAP_LEN];
- struct osd_security_parameters sec_params;
- /* FIXME: osdv2_security_parameters */
+ struct osdv2_security_parameters sec_params;
} __packed;
struct osd_cdb {
__be32 attr_id;
} __packed;
+/*
+ * NOTE: v1: is not aligned.
+ */
+struct osdv1_attributes_list_element {
+ __be32 attr_page;
+ __be32 attr_id;
+ __be16 attr_bytes; /* valid bytes at attr_val without padding */
+ u8 attr_val[0];
+} __packed;
+
/*
* osd2r03: 7.1.3.3 List entry format for retrieved attributes and
* for setting attributes
- * NOTE: v2 is 8-bytes aligned, v1 is not aligned.
+ * NOTE: v2 is 8-bytes aligned
*/
-struct osd_attributes_list_element {
+struct osdv2_attributes_list_element {
__be32 attr_page;
__be32 attr_id;
- __be16 attr_bytes;
+ u8 reserved[6];
+ __be16 attr_bytes; /* valid bytes at attr_val without padding */
u8 attr_val[0];
} __packed;
static inline unsigned osdv1_attr_list_elem_size(unsigned len)
{
- return ALIGN(len + sizeof(struct osd_attributes_list_element),
+ return ALIGN(len + sizeof(struct osdv1_attributes_list_element),
OSDv1_ATTRIBUTES_ELEM_ALIGN);
}
static inline unsigned osdv2_attr_list_elem_size(unsigned len)
{
- return ALIGN(len + sizeof(struct osd_attributes_list_element),
+ return ALIGN(len + sizeof(struct osdv2_attributes_list_element),
OSD_ATTRIBUTES_ELEM_ALIGN);
}
__be64 data_bytes;
__be64 set_attributes_bytes;
__be64 get_attributes_bytes;
- __be64 integrity_check_value;
+ __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
} __packed;
+/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_out_integrity_info_sizeof(bool is_ver1)
+{
+ return sizeof(struct osd_data_out_integrity_info) -
+ (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
struct osd_data_in_integrity_info {
__be64 data_bytes;
__be64 retrieved_attributes_bytes;
- __be64 integrity_check_value;
+ __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
} __packed;
+/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_in_integrity_info_sizeof(bool is_ver1)
+{
+ return sizeof(struct osd_data_in_integrity_info) -
+ (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
struct osd_timestamp {
u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */
} __packed;
OSD_SEC_CAP_NONE1 = BIT(8),
OSD_SEC_CAP_NONE2 = BIT(9),
- OSD_SEC_CAP_NONE3 = BIT(10),
+ OSD_SEC_GBL_REM = BIT(10), /*v2 only*/
OSD_SEC_CAP_QUERY = BIT(11), /*v2 only*/
OSD_SEC_CAP_M_OBJECT = BIT(12), /*v2 only*/
OSD_SEC_CAP_POL_SEC = BIT(13),
struct osd_capability {
struct osd_capability_head h;
-/* struct osd_cap_object_descriptor od;*/
- struct osdv1_cap_object_descriptor od; /* FIXME: Pete rev-001 sup */
+ struct osd_cap_object_descriptor od;
} __packed;
/**
int type;
const char *id;
char name[100];
+ void *private_data;
+ void (*private_free)(struct snd_jack *);
};
#ifdef CONFIG_SND_JACK
int overrange;
snd_pcm_uframes_t avail_max;
snd_pcm_uframes_t hw_ptr_base; /* Position at buffer restart */
- snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time*/
+ snd_pcm_uframes_t hw_ptr_interrupt; /* Position at interrupt time */
+ unsigned long hw_ptr_jiffies; /* Time when hw_ptr is updated */
/* -- HW params -- */
snd_pcm_access_t access; /* access mode */
extern int pxa2xx_ac97_hw_probe(struct platform_device *dev);
extern void pxa2xx_ac97_hw_remove(struct platform_device *dev);
-/* AC97 platform_data */
-/**
- * struct pxa2xx_ac97_platform_data - pxa ac97 platform data
- * @reset_gpio: AC97 reset gpio (normally gpio113 or gpio95)
- * a -1 value means no gpio will be used for reset
- *
- * Platform data should only be specified for pxa27x CPUs where a silicon bug
- * prevents correct operation of the reset line. If not specified, the default
- * behaviour is to consider gpio 113 as the AC97 reset line, which is the
- * default on most boards.
- */
-struct pxa2xx_ac97_platform_data {
- int reset_gpio;
-};
-
#endif
/* include/version.h */
-#define CONFIG_SND_VERSION "1.0.19"
+#define CONFIG_SND_VERSION "1.0.20"
#define CONFIG_SND_DATE ""
+++ /dev/null
-
-#ifndef CYBLAFB_DEBUG
-#define CYBLAFB_DEBUG 0
-#endif
-
-#if CYBLAFB_DEBUG
-#define debug(f,a...) printk("%s:" f, __func__ , ## a);
-#else
-#define debug(f,a...)
-#endif
-
-#define output(f, a...) printk("cyblafb: " f, ## a)
-
-#define Kb (1024)
-#define Mb (Kb*Kb)
-
-/* PCI IDS of supported cards temporarily here */
-
-#define CYBERBLADEi1 0x8500
-
-/* these defines are for 'lcd' variable */
-#define LCD_STRETCH 0
-#define LCD_CENTER 1
-#define LCD_BIOS 2
-
-/* display types */
-#define DISPLAY_CRT 0
-#define DISPLAY_FP 1
-
-#define ROP_S 0xCC
-
-#define point(x,y) ((y)<<16|(x))
-
-//
-// Attribute Regs, ARxx, 3c0/3c1
-//
-#define AR00 0x00
-#define AR01 0x01
-#define AR02 0x02
-#define AR03 0x03
-#define AR04 0x04
-#define AR05 0x05
-#define AR06 0x06
-#define AR07 0x07
-#define AR08 0x08
-#define AR09 0x09
-#define AR0A 0x0A
-#define AR0B 0x0B
-#define AR0C 0x0C
-#define AR0D 0x0D
-#define AR0E 0x0E
-#define AR0F 0x0F
-#define AR10 0x10
-#define AR12 0x12
-#define AR13 0x13
-
-//
-// Sequencer Regs, SRxx, 3c4/3c5
-//
-#define SR00 0x00
-#define SR01 0x01
-#define SR02 0x02
-#define SR03 0x03
-#define SR04 0x04
-#define SR0D 0x0D
-#define SR0E 0x0E
-#define SR11 0x11
-#define SR18 0x18
-#define SR19 0x19
-
-//
-//
-//
-#define CR00 0x00
-#define CR01 0x01
-#define CR02 0x02
-#define CR03 0x03
-#define CR04 0x04
-#define CR05 0x05
-#define CR06 0x06
-#define CR07 0x07
-#define CR08 0x08
-#define CR09 0x09
-#define CR0A 0x0A
-#define CR0B 0x0B
-#define CR0C 0x0C
-#define CR0D 0x0D
-#define CR0E 0x0E
-#define CR0F 0x0F
-#define CR10 0x10
-#define CR11 0x11
-#define CR12 0x12
-#define CR13 0x13
-#define CR14 0x14
-#define CR15 0x15
-#define CR16 0x16
-#define CR17 0x17
-#define CR18 0x18
-#define CR19 0x19
-#define CR1A 0x1A
-#define CR1B 0x1B
-#define CR1C 0x1C
-#define CR1D 0x1D
-#define CR1E 0x1E
-#define CR1F 0x1F
-#define CR20 0x20
-#define CR21 0x21
-#define CR27 0x27
-#define CR29 0x29
-#define CR2A 0x2A
-#define CR2B 0x2B
-#define CR2D 0x2D
-#define CR2F 0x2F
-#define CR36 0x36
-#define CR38 0x38
-#define CR39 0x39
-#define CR3A 0x3A
-#define CR55 0x55
-#define CR56 0x56
-#define CR57 0x57
-#define CR58 0x58
-
-//
-//
-//
-
-#define GR00 0x01
-#define GR01 0x01
-#define GR02 0x02
-#define GR03 0x03
-#define GR04 0x04
-#define GR05 0x05
-#define GR06 0x06
-#define GR07 0x07
-#define GR08 0x08
-#define GR0F 0x0F
-#define GR20 0x20
-#define GR23 0x23
-#define GR2F 0x2F
-#define GR30 0x30
-#define GR31 0x31
-#define GR33 0x33
-#define GR52 0x52
-#define GR53 0x53
-#define GR5D 0x5d
-
-
-//
-// Graphics Engine
-//
-#define GEBase 0x2100 // could be mapped elsewhere if we like it
-#define GE00 (GEBase+0x00) // source 1, p 111
-#define GE04 (GEBase+0x04) // source 2, p 111
-#define GE08 (GEBase+0x08) // destination 1, p 111
-#define GE0C (GEBase+0x0C) // destination 2, p 112
-#define GE10 (GEBase+0x10) // right view base & enable, p 112
-#define GE13 (GEBase+0x13) // left view base & enable, p 112
-#define GE18 (GEBase+0x18) // block write start address, p 112
-#define GE1C (GEBase+0x1C) // block write end address, p 112
-#define GE20 (GEBase+0x20) // engine status, p 113
-#define GE24 (GEBase+0x24) // reset all GE pointers
-#define GE44 (GEBase+0x44) // command register, p 126
-#define GE48 (GEBase+0x48) // raster operation, p 127
-#define GE60 (GEBase+0x60) // foreground color, p 128
-#define GE64 (GEBase+0x64) // background color, p 128
-#define GE6C (GEBase+0x6C) // Pattern and Style, p 129, ok
-#define GE9C (GEBase+0x9C) // pixel engine data port, p 125
-#define GEB8 (GEBase+0xB8) // Destination Stride / Buffer Base 0, p 133
-#define GEBC (GEBase+0xBC) // Destination Stride / Buffer Base 1, p 133
-#define GEC0 (GEBase+0xC0) // Destination Stride / Buffer Base 2, p 133
-#define GEC4 (GEBase+0xC4) // Destination Stride / Buffer Base 3, p 133
-#define GEC8 (GEBase+0xC8) // Source Stride / Buffer Base 0, p 133
-#define GECC (GEBase+0xCC) // Source Stride / Buffer Base 1, p 133
-#define GED0 (GEBase+0xD0) // Source Stride / Buffer Base 2, p 133
-#define GED4 (GEBase+0xD4) // Source Stride / Buffer Base 3, p 133
if (wfd >= 0) {
sys_fchown(wfd, uid, gid);
sys_fchmod(wfd, mode);
- sys_ftruncate(wfd, body_len);
+ if (body_len)
+ sys_ftruncate(wfd, body_len);
vcollected = kstrdup(collected, GFP_KERNEL);
state = CopyFile;
}
initrd_end = 0;
}
+#ifdef CONFIG_BLK_DEV_RAM
#define BUF_SIZE 1024
static void __init clean_rootfs(void)
{
sys_close(fd);
kfree(buf);
}
+#endif
static int __init populate_rootfs(void)
{
if (initrd_start) {
#ifdef CONFIG_BLK_DEV_RAM
int fd;
- printk(KERN_INFO "checking if image is initramfs...\n");
+ printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start,
initrd_end - initrd_start);
if (!err) {
- printk(KERN_INFO "rootfs image is initramfs; unpacking...\n");
free_initrd();
return 0;
} else {
free_initrd();
}
#else
- printk(KERN_INFO "Unpacking initramfs...");
+ printk(KERN_INFO "Unpacking initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start,
initrd_end - initrd_start);
- if (err) {
- printk(" failed!\n");
- printk(KERN_EMERG "%s\n", err);
- } else {
- printk(" done\n");
- }
+ if (err)
+ printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err);
free_initrd();
#endif
}
return 0;
}
+void __init parse_early_options(char *cmdline)
+{
+ parse_args("early options", cmdline, NULL, 0, do_early_param);
+}
+
/* Arch code calls this early on, or if not, just before other parsing. */
void __init parse_early_param(void)
{
/* All fall through to do_early_param. */
strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
- parse_args("early options", tmp_cmdline, NULL, 0, do_early_param);
+ parse_early_options(tmp_cmdline);
done = 1;
}
#define MIN_MSGSIZEMAX 128 /* min value for msgsize_max */
#define MAX_MSGSIZEMAX (8192*128) /* max value for msgsize_max */
+#ifdef CONFIG_PROC_SYSCTL
static void *get_mq(ctl_table *table)
{
char *which = table->data;
return which;
}
-#ifdef CONFIG_PROC_SYSCTL
static int proc_mq_dointvec(ctl_table *table, int write, struct file *filp,
void __user *buffer, size_t *lenp, loff_t *ppos)
{
dentry = dget(path.dentry);
path_put(&path);
- if (dentry == tagged->mnt_root && dentry == mnt->mnt_root)
- follow_up(&mnt, &dentry);
-
list_add_tail(&list, &tagged->mnt_list);
mutex_lock(&audit_filter_mutex);
if (audit_enabled) {
struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_KERNEL,
+ ab = audit_log_start(NULL, GFP_NOFS,
AUDIT_CONFIG_CHANGE);
audit_log_format(ab, "auid=%u ses=%u",
audit_get_loginuid(current),
e = container_of(r, struct audit_entry, rule);
if (audit_enabled) {
struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_KERNEL,
+ ab = audit_log_start(NULL, GFP_NOFS,
AUDIT_CONFIG_CHANGE);
audit_log_format(ab, "auid=%u ses=%u",
audit_get_loginuid(current),
free_cg_links:
free_cg_links(&tmp_cg_links);
drop_new_super:
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return ret;
}
irqreturn_t ret, retval = IRQ_NONE;
unsigned int status = 0;
- WARN_ONCE(!in_irq(), "BUG: IRQ handler called from non-hardirq context!");
-
if (!(action->flags & IRQF_DISABLED))
local_irq_enable_in_hardirq();
spin_lock_irqsave(&desc->lock, flags);
#ifdef CONFIG_GENERIC_PENDING_IRQ
- if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) {
- cpumask_copy(desc->affinity, cpumask);
+ if (desc->status & IRQ_MOVE_PCNTXT)
desc->chip->set_affinity(irq, cpumask);
- } else {
+ else {
desc->status |= IRQ_MOVE_PENDING;
cpumask_copy(desc->pending_mask, cpumask);
}
static struct sysrq_key_op sysrq_gdb_op = {
.handler = sysrq_handle_gdb,
- .help_msg = "Gdb",
- .action_msg = "GDB",
+ .help_msg = "debug(G)",
+ .action_msg = "DEBUG",
};
#endif
return NULL;
}
+/* Arm a kprobe with text_mutex */
+static void __kprobes arm_kprobe(struct kprobe *kp)
+{
+ mutex_lock(&text_mutex);
+ arch_arm_kprobe(kp);
+ mutex_unlock(&text_mutex);
+}
+
+/* Disarm a kprobe with text_mutex */
+static void __kprobes disarm_kprobe(struct kprobe *kp)
+{
+ mutex_lock(&text_mutex);
+ arch_disarm_kprobe(kp);
+ mutex_unlock(&text_mutex);
+}
+
/*
* Aggregate handlers for multiple kprobes support - these handlers
* take care of invoking the individual kprobe handlers on p->list
ap->flags &= ~KPROBE_FLAG_DISABLED;
if (!kprobes_all_disarmed)
/* Arm the breakpoint again. */
- arch_arm_kprobe(ap);
+ arm_kprobe(ap);
}
return 0;
}
* enabled and not gone - otherwise, the breakpoint would
* already have been removed. We save on flushing icache.
*/
- if (!kprobes_all_disarmed && !kprobe_disabled(old_p)) {
- mutex_lock(&text_mutex);
- arch_disarm_kprobe(p);
- mutex_unlock(&text_mutex);
- }
+ if (!kprobes_all_disarmed && !kprobe_disabled(old_p))
+ disarm_kprobe(p);
hlist_del_rcu(&old_p->hlist);
} else {
if (p->break_handler && !kprobe_gone(p))
if (!kprobe_disabled(old_p)) {
try_to_disable_aggr_kprobe(old_p);
if (!kprobes_all_disarmed && kprobe_disabled(old_p))
- arch_disarm_kprobe(old_p);
+ disarm_kprobe(old_p);
}
}
return 0;
try_to_disable_aggr_kprobe(p);
if (!kprobes_all_disarmed && kprobe_disabled(p))
- arch_disarm_kprobe(p);
+ disarm_kprobe(p);
out:
mutex_unlock(&kprobe_mutex);
return ret;
}
if (!kprobes_all_disarmed && kprobe_disabled(p))
- arch_arm_kprobe(p);
+ arm_kprobe(p);
p->flags &= ~KPROBE_FLAG_DISABLED;
if (p != kp)
void lockdep_init_map(struct lockdep_map *lock, const char *name,
struct lock_class_key *key, int subclass)
{
- if (unlikely(!debug_locks))
+ lock->class_cache = NULL;
+#ifdef CONFIG_LOCK_STAT
+ lock->cpu = raw_smp_processor_id();
+#endif
+
+ if (DEBUG_LOCKS_WARN_ON(!name)) {
+ lock->name = "NULL";
return;
+ }
+
+ lock->name = name;
if (DEBUG_LOCKS_WARN_ON(!key))
return;
- if (DEBUG_LOCKS_WARN_ON(!name))
- return;
/*
* Sanity check, the lock-class key must be persistent:
*/
DEBUG_LOCKS_WARN_ON(1);
return;
}
- lock->name = name;
lock->key = key;
- lock->class_cache = NULL;
-#ifdef CONFIG_LOCK_STAT
- lock->cpu = raw_smp_processor_id();
-#endif
+
+ if (unlikely(!debug_locks))
+ return;
+
if (subclass)
register_lock_class(lock, subclass, 1);
}
* post-warning case.
*/
if (flag != TAINT_CRAP && flag != TAINT_WARN && __debug_locks_off())
- printk(KERN_WARNING "Disabling lockdep due to kernel taint\n");
+ printk(KERN_WARNING "Disabling lock debugging due to kernel taint\n");
set_bit(flag, &tainted_mask);
}
}
#ifdef WANT_WARN_ON_SLOWPATH
-void warn_slowpath(const char *file, int line, const char *fmt, ...)
+void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
{
va_list args;
char function[KSYM_SYMBOL_LEN];
if (board)
printk(KERN_WARNING "Hardware name: %s\n", board);
- if (fmt) {
+ if (*fmt) {
va_start(args, fmt);
vprintk(fmt, args);
va_end(args);
print_oops_end_marker();
add_taint(TAINT_WARN);
}
-EXPORT_SYMBOL(warn_slowpath);
+EXPORT_SYMBOL(warn_slowpath_fmt);
+
+void warn_slowpath_null(const char *file, int line)
+{
+ static const char *empty = "";
+ warn_slowpath_fmt(file, line, empty);
+}
+EXPORT_SYMBOL(warn_slowpath_null);
#endif
#ifdef CONFIG_CC_STACKPROTECTOR
* timer call will interfere.
*/
list_for_each_entry_safe(timer, next, &firing, it.cpu.entry) {
- int firing;
+ int cpu_firing;
+
spin_lock(&timer->it_lock);
list_del_init(&timer->it.cpu.entry);
- firing = timer->it.cpu.firing;
+ cpu_firing = timer->it.cpu.firing;
timer->it.cpu.firing = 0;
/*
* The firing flag is -1 if we collided with a reset
* of the timer, which already reported this
* almost-firing as an overrun. So don't generate an event.
*/
- if (likely(firing >= 0)) {
+ if (likely(cpu_firing >= 0))
cpu_timer_fire(timer);
- }
spin_unlock(&timer->it_lock);
}
}
if (noresume)
return 0;
- /*
- * We can't depend on SCSI devices being available after loading one of
- * their modules if scsi_complete_async_scans() is not called and the
- * resume device usually is a SCSI one.
- */
- scsi_complete_async_scans();
-
/*
* name_to_dev_t() below takes a sysfs buffer mutex when sysfs
* is configured into the kernel. Since the regular hibernate
* here to avoid lockdep complaining.
*/
mutex_lock_nested(&pm_mutex, SINGLE_DEPTH_NESTING);
+
+ if (swsusp_resume_device)
+ goto Check_image;
+
+ if (!strlen(resume_file)) {
+ error = -ENOENT;
+ goto Unlock;
+ }
+
+ pr_debug("PM: Checking image partition %s\n", resume_file);
+
+ /* Check if the device is there */
+ swsusp_resume_device = name_to_dev_t(resume_file);
if (!swsusp_resume_device) {
- if (!strlen(resume_file)) {
- mutex_unlock(&pm_mutex);
- return -ENOENT;
- }
/*
* Some device discovery might still be in progress; we need
* to wait for this to finish.
*/
wait_for_device_probe();
+ /*
+ * We can't depend on SCSI devices being available after loading
+ * one of their modules until scsi_complete_async_scans() is
+ * called and the resume device usually is a SCSI one.
+ */
+ scsi_complete_async_scans();
+
swsusp_resume_device = name_to_dev_t(resume_file);
- pr_debug("PM: Resume from partition %s\n", resume_file);
- } else {
- pr_debug("PM: Resume from partition %d:%d\n",
- MAJOR(swsusp_resume_device),
- MINOR(swsusp_resume_device));
+ if (!swsusp_resume_device) {
+ error = -ENODEV;
+ goto Unlock;
+ }
}
- if (noresume) {
- /**
- * FIXME: If noresume is specified, we need to find the
- * partition and reset it back to normal swap space.
- */
- mutex_unlock(&pm_mutex);
- return 0;
- }
+ Check_image:
+ pr_debug("PM: Resume from partition %d:%d\n",
+ MAJOR(swsusp_resume_device), MINOR(swsusp_resume_device));
pr_debug("PM: Checking hibernation image.\n");
error = swsusp_check();
device_pm_lock();
+ if (suspend_ops->prepare) {
+ error = suspend_ops->prepare();
+ if (error)
+ goto Done;
+ }
+
error = device_power_down(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to power down\n");
- goto Done;
+ goto Platfrom_finish;
}
- if (suspend_ops->prepare) {
- error = suspend_ops->prepare();
+ if (suspend_ops->prepare_late) {
+ error = suspend_ops->prepare_late();
if (error)
goto Power_up_devices;
}
if (suspend_test(TEST_PLATFORM))
- goto Platfrom_finish;
+ goto Platform_wake;
error = disable_nonboot_cpus();
if (error || suspend_test(TEST_CPUS))
Enable_cpus:
enable_nonboot_cpus();
- Platfrom_finish:
- if (suspend_ops->finish)
- suspend_ops->finish();
+ Platform_wake:
+ if (suspend_ops->wake)
+ suspend_ops->wake();
Power_up_devices:
device_power_up(PMSG_RESUME);
+ Platfrom_finish:
+ if (suspend_ops->finish)
+ suspend_ops->finish();
+
Done:
device_pm_unlock();
struct bio *bio;
bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1);
- if (!bio)
- return -ENOMEM;
bio->bi_sector = page_off * (PAGE_SIZE >> 9);
bio->bi_bdev = resume_bdev;
bio->bi_end_io = end_swap_bio_read;
/* Protect exec's credential calculations against our interference;
* SUID, SGID and LSM creds get determined differently under ptrace.
*/
- retval = mutex_lock_interruptible(¤t->cred_exec_mutex);
+ retval = mutex_lock_interruptible(&task->cred_exec_mutex);
if (retval < 0)
goto out;
bad:
write_unlock_irqrestore(&tasklist_lock, flags);
task_unlock(task);
- mutex_unlock(¤t->cred_exec_mutex);
+ mutex_unlock(&task->cred_exec_mutex);
out:
return retval;
}
ret = security_ptrace_traceme(current->parent);
/*
- * Set the ptrace bit in the process ptrace flags.
- * Then link us on our parent's ptraced list.
+ * Check PF_EXITING to ensure ->real_parent has not passed
+ * exit_ptrace(). Otherwise we don't report the error but
+ * pretend ->real_parent untraces us right after return.
*/
- if (!ret) {
+ if (!ret && !(current->real_parent->flags & PF_EXITING)) {
current->ptrace |= PT_PTRACED;
__ptrace_link(current, current->real_parent);
}
static struct completion rcu_barrier_completion;
int rcu_scheduler_active __read_mostly;
+static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
+static struct rcu_head rcu_migrate_head[3];
+static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
+
/*
* Awaken the corresponding synchronize_rcu() instance now that a
* grace period has elapsed.
}
}
-static inline void wait_migrated_callbacks(void);
+static inline void wait_migrated_callbacks(void)
+{
+ wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
+}
/*
* Orchestrate the specified type of RCU barrier, waiting for all
}
EXPORT_SYMBOL_GPL(rcu_barrier_sched);
-static atomic_t rcu_migrate_type_count = ATOMIC_INIT(0);
-static struct rcu_head rcu_migrate_head[3];
-static DECLARE_WAIT_QUEUE_HEAD(rcu_migrate_wq);
-
static void rcu_migrate_callback(struct rcu_head *notused)
{
if (atomic_dec_and_test(&rcu_migrate_type_count))
wake_up(&rcu_migrate_wq);
}
-static inline void wait_migrated_callbacks(void)
-{
- wait_event(rcu_migrate_wq, !atomic_read(&rcu_migrate_type_count));
-}
-
static int __cpuinit rcu_barrier_cpu_hotplug(struct notifier_block *self,
unsigned long action, void *hcpu)
{
rdp->qs_pending = 1;
rdp->passed_quiesc = 0;
rdp->gpnum = rsp->gpnum;
- rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
- RCU_JIFFIES_TILL_FORCE_QS;
}
/*
rsp->gpnum++;
rsp->signaled = RCU_GP_INIT; /* Hold off force_quiescent_state. */
rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
- rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
- RCU_JIFFIES_TILL_FORCE_QS;
record_gp_stall_check_time(rsp);
dyntick_record_completed(rsp, rsp->completed - 1);
note_new_gpnum(rsp, rdp);
{
unsigned long flags;
long lastcomp;
- struct rcu_data *rdp = rsp->rda[smp_processor_id()];
struct rcu_node *rnp = rcu_get_root(rsp);
u8 signaled;
return; /* Someone else is already on the job. */
}
if (relaxed &&
- (long)(rsp->jiffies_force_qs - jiffies) >= 0 &&
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) >= 0)
+ (long)(rsp->jiffies_force_qs - jiffies) >= 0)
goto unlock_ret; /* no emergency and done recently. */
rsp->n_force_qs++;
spin_lock(&rnp->lock);
lastcomp = rsp->completed;
signaled = rsp->signaled;
rsp->jiffies_force_qs = jiffies + RCU_JIFFIES_TILL_FORCE_QS;
- rdp->n_rcu_pending_force_qs = rdp->n_rcu_pending +
- RCU_JIFFIES_TILL_FORCE_QS;
if (lastcomp == rsp->gpnum) {
rsp->n_force_qs_ngp++;
spin_unlock(&rnp->lock);
* If an RCU GP has gone long enough, go check for dyntick
* idle CPUs and, if needed, send resched IPIs.
*/
- if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+ if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
force_quiescent_state(rsp, 1);
/*
if (unlikely(++rdp->qlen > qhimark)) {
rdp->blimit = LONG_MAX;
force_quiescent_state(rsp, 0);
- } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0)
+ } else if ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0)
force_quiescent_state(rsp, 1);
local_irq_restore(flags);
}
/* Has an RCU GP gone long enough to send resched IPIs &c? */
if (ACCESS_ONCE(rsp->completed) != ACCESS_ONCE(rsp->gpnum) &&
- ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0 ||
- (rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending) < 0))
+ ((long)(ACCESS_ONCE(rsp->jiffies_force_qs) - jiffies) < 0))
return 1;
/* nothing to do */
{
if (!rdp->beenonline)
return;
- seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d rpfq=%ld rp=%x",
+ seq_printf(m, "%3d%cc=%ld g=%ld pq=%d pqc=%ld qp=%d",
rdp->cpu,
cpu_is_offline(rdp->cpu) ? '!' : ' ',
rdp->completed, rdp->gpnum,
rdp->passed_quiesc, rdp->passed_quiesc_completed,
- rdp->qs_pending,
- rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
- (int)(rdp->n_rcu_pending & 0xffff));
+ rdp->qs_pending);
#ifdef CONFIG_NO_HZ
seq_printf(m, " dt=%d/%d dn=%d df=%lu",
rdp->dynticks->dynticks,
{
if (!rdp->beenonline)
return;
- seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d,%ld,%ld",
+ seq_printf(m, "%d,%s,%ld,%ld,%d,%ld,%d",
rdp->cpu,
cpu_is_offline(rdp->cpu) ? "\"Y\"" : "\"N\"",
rdp->completed, rdp->gpnum,
rdp->passed_quiesc, rdp->passed_quiesc_completed,
- rdp->qs_pending,
- rdp->n_rcu_pending_force_qs - rdp->n_rcu_pending,
- rdp->n_rcu_pending);
+ rdp->qs_pending);
#ifdef CONFIG_NO_HZ
seq_printf(m, ",%d,%d,%d,%lu",
rdp->dynticks->dynticks,
static int show_rcudata_csv(struct seq_file *m, void *unused)
{
- seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",\"rpfq\",\"rp\",");
+ seq_puts(m, "\"CPU\",\"Online?\",\"c\",\"g\",\"pq\",\"pqc\",\"pq\",");
#ifdef CONFIG_NO_HZ
seq_puts(m, "\"dt\",\"dt nesting\",\"dn\",\"df\",");
#endif /* #ifdef CONFIG_NO_HZ */
res->end = end;
res->flags = IORESOURCE_BUSY;
- for (;;) {
- conflict = __request_resource(parent, res);
- if (!conflict)
- break;
- if (conflict != parent) {
- parent = conflict;
- if (!(conflict->flags & IORESOURCE_BUSY))
- continue;
- }
-
- /* Uhhuh, that didn't work out.. */
- kfree(res);
- res = NULL;
- break;
- }
-
- if (!res) {
- /* failed, split and try again */
-
- /* conflict covered whole area */
- if (conflict->start <= start && conflict->end >= end)
- return;
+ conflict = __request_resource(parent, res);
+ if (!conflict)
+ return;
- if (conflict->start > start)
- __reserve_region_with_split(root, start, conflict->start-1, name);
- if (!(conflict->flags & IORESOURCE_BUSY)) {
- resource_size_t common_start, common_end;
+ /* failed, split and try again */
+ kfree(res);
- common_start = max(conflict->start, start);
- common_end = min(conflict->end, end);
- if (common_start < common_end)
- __reserve_region_with_split(root, common_start, common_end, name);
- }
- if (conflict->end < end)
- __reserve_region_with_split(root, conflict->end+1, end, name);
- }
+ /* conflict covered whole area */
+ if (conflict->start <= start && conflict->end >= end)
+ return;
+ if (conflict->start > start)
+ __reserve_region_with_split(root, start, conflict->start-1, name);
+ if (conflict->end < end)
+ __reserve_region_with_split(root, conflict->end+1, end, name);
}
void __init reserve_region_with_split(struct resource *root,
if (user_tick)
account_user_time(p, one_jiffy, one_jiffy_scaled);
- else if (p != rq->idle)
+ else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET))
account_system_time(p, HARDIRQ_OFFSET, one_jiffy,
one_jiffy_scaled);
else
#endif
}
-unsigned long get_parent_ip(unsigned long addr)
+notrace unsigned long get_parent_ip(unsigned long addr)
{
if (in_lock_functions(addr)) {
addr = CALLER_ADDR2;
cpumask_or(groupmask, groupmask, sched_group_cpus(group));
cpulist_scnprintf(str, sizeof(str), sched_group_cpus(group));
- printk(KERN_CONT " %s (__cpu_power = %d)", str,
- group->__cpu_power);
+
+ printk(KERN_CONT " %s", str);
+ if (group->__cpu_power != SCHED_LOAD_SCALE) {
+ printk(KERN_CONT " (__cpu_power = %d)",
+ group->__cpu_power);
+ }
group = group->next;
} while (group != sd->groups);
if (slow_work_user_count == 0) {
printk(KERN_NOTICE "Slow work thread pool: Shutting down\n");
slow_work_threads_should_exit = true;
+ del_timer_sync(&slow_work_cull_timer);
+ del_timer_sync(&slow_work_oom_timer);
wake_up_all(&slow_work_thread_wq);
wait_for_completion(&slow_work_last_thread_exited);
printk(KERN_NOTICE "Slow work thread pool:"
" Shut down complete\n");
}
- del_timer_sync(&slow_work_cull_timer);
-
mutex_unlock(&slow_work_user_lock);
}
EXPORT_SYMBOL(slow_work_unregister_user);
printk("Attempt to kill tasklet from interrupt\n");
while (test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) {
- do
+ do {
yield();
- while (test_bit(TASKLET_STATE_SCHED, &t->state));
+ } while (test_bit(TASKLET_STATE_SCHED, &t->state));
}
tasklet_unlock_wait(t);
clear_bit(TASKLET_STATE_SCHED, &t->state);
void __user *, arg)
{
char buffer[256];
+ int ret = 0;
/* We only trust the superuser with rebooting the system. */
if (!capable(CAP_SYS_BOOT))
kernel_halt();
unlock_kernel();
do_exit(0);
- break;
+ panic("cannot halt");
case LINUX_REBOOT_CMD_POWER_OFF:
kernel_power_off();
#ifdef CONFIG_KEXEC
case LINUX_REBOOT_CMD_KEXEC:
- {
- int ret;
- ret = kernel_kexec();
- unlock_kernel();
- return ret;
- }
+ ret = kernel_kexec();
+ break;
#endif
#ifdef CONFIG_HIBERNATION
case LINUX_REBOOT_CMD_SW_SUSPEND:
- {
- int ret = hibernate();
- unlock_kernel();
- return ret;
- }
+ ret = hibernate();
+ break;
#endif
default:
- unlock_kernel();
- return -EINVAL;
+ ret = -EINVAL;
+ break;
}
unlock_kernel();
- return 0;
+ return ret;
}
static void deferred_cad(struct work_struct *dummy)
static int __maybe_unused two = 2;
static unsigned long one_ul = 1;
static int one_hundred = 100;
-static int one_thousand = 1000;
+
+/* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
+static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
static int maxolduid = 65535;
.proc_handler = &proc_dointvec,
},
#endif
-#ifdef CONFIG_UNEVICTABLE_LRU
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "scan_unevictable_pages",
- .data = &scan_unevictable_pages,
- .maxlen = sizeof(scan_unevictable_pages),
- .mode = 0644,
- .proc_handler = &scan_unevictable_handler,
- },
-#endif
#ifdef CONFIG_SLOW_WORK
{
.ctl_name = CTL_UNNUMBERED,
.mode = 0644,
.proc_handler = &dirty_bytes_handler,
.strategy = &sysctl_intvec,
- .extra1 = &one_ul,
+ .extra1 = &dirty_bytes_min,
},
{
.procname = "dirty_writeback_centisecs",
.mode = 0444 /* read-only*/,
.proc_handler = &proc_dointvec,
},
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "nr_pdflush_threads_min",
- .data = &nr_pdflush_threads_min,
- .maxlen = sizeof nr_pdflush_threads_min,
- .mode = 0644 /* read-write */,
- .proc_handler = &proc_dointvec_minmax,
- .strategy = &sysctl_intvec,
- .extra1 = &one,
- .extra2 = &nr_pdflush_threads_max,
- },
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "nr_pdflush_threads_max",
- .data = &nr_pdflush_threads_max,
- .maxlen = sizeof nr_pdflush_threads_max,
- .mode = 0644 /* read-write */,
- .proc_handler = &proc_dointvec_minmax,
- .strategy = &sysctl_intvec,
- .extra1 = &nr_pdflush_threads_min,
- .extra2 = &one_thousand,
- },
{
.ctl_name = VM_SWAPPINESS,
.procname = "swappiness",
.extra2 = &one,
},
#endif
+#ifdef CONFIG_UNEVICTABLE_LRU
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "scan_unevictable_pages",
+ .data = &scan_unevictable_pages,
+ .maxlen = sizeof(scan_unevictable_pages),
+ .mode = 0644,
+ .proc_handler = &scan_unevictable_handler,
+ },
+#endif
/*
* NOTE: do not add new entries to this table unless you have read
* Documentation/sysctl/ctl_unnumbered.txt
resumed = test_and_clear_bit(0, &watchdog_resumed);
- wdnow = watchdog->read();
+ wdnow = watchdog->read(watchdog);
wd_nsec = cyc2ns(watchdog, (wdnow - watchdog_last) & watchdog->mask);
watchdog_last = wdnow;
list_for_each_entry_safe(cs, tmp, &watchdog_list, wd_list) {
- csnow = cs->read();
+ csnow = cs->read(cs);
if (unlikely(resumed)) {
cs->wd_last = csnow;
list_add(&cs->wd_list, &watchdog_list);
if (!started && watchdog) {
- watchdog_last = watchdog->read();
+ watchdog_last = watchdog->read(watchdog);
watchdog_timer.expires = jiffies + WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer,
cpumask_first(cpu_online_mask));
cse->flags &= ~CLOCK_SOURCE_WATCHDOG;
/* Start if list is not empty */
if (!list_empty(&watchdog_list)) {
- watchdog_last = watchdog->read();
+ watchdog_last = watchdog->read(watchdog);
watchdog_timer.expires =
jiffies + WATCHDOG_INTERVAL;
add_timer_on(&watchdog_timer,
*/
#define JIFFIES_SHIFT 8
-static cycle_t jiffies_read(void)
+static cycle_t jiffies_read(struct clocksource *cs)
{
return (cycle_t) jiffies;
}
for (;;) {
if (!clockevents_program_event(dev, next, ktime_get()))
return;
- tick_periodic(cpu);
+ /*
+ * Have to be careful here. If we're in oneshot mode,
+ * before we call tick_periodic() in a loop, we need
+ * to be sure we're using a real hardware clocksource.
+ * Otherwise we could get trapped in an infinite
+ * loop, as the tick_periodic() increments jiffies,
+ * when then will increment time, posibly causing
+ * the loop to trigger again and again.
+ */
+ if (timekeeping_valid_for_hres())
+ tick_periodic(cpu);
next = ktime_add(next, tick_period);
}
}
*/
static void change_clocksource(void)
{
- struct clocksource *new;
+ struct clocksource *new, *old;
new = clocksource_get_next();
clocksource_forward_now();
- new->raw_time = clock->raw_time;
+ if (clocksource_enable(new))
+ return;
+ new->raw_time = clock->raw_time;
+ old = clock;
clock = new;
+ clocksource_disable(old);
+
clock->cycle_last = 0;
- clock->cycle_last = clocksource_read(new);
+ clock->cycle_last = clocksource_read(clock);
clock->error = 0;
clock->xtime_nsec = 0;
clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
ntp_init();
clock = clocksource_get_next();
+ clocksource_enable(clock);
clocksource_calculate_interval(clock, NTP_INTERVAL_LENGTH);
clock->cycle_last = clocksource_read(clock);
if (!ref)
break;
+ ref->ref = 1;
ref->buffer = info->tr->buffer;
ref->page = ring_buffer_alloc_read_page(ref->buffer);
if (!ref->page) {
return TRACE_TYPE_HANDLED;
}
+static void branch_print_header(struct seq_file *s)
+{
+ seq_puts(s, "# TASK-PID CPU# TIMESTAMP CORRECT"
+ " FUNC:FILE:LINE\n");
+ seq_puts(s, "# | | | | | "
+ " |\n");
+}
static struct trace_event trace_branch_event = {
.type = TRACE_BRANCH,
#ifdef CONFIG_FTRACE_SELFTEST
.selftest = trace_selftest_startup_branch,
#endif /* CONFIG_FTRACE_SELFTEST */
+ .print_header = branch_print_header,
};
__init static int init_branch_tracer(void)
return TRACE_TYPE_UNHANDLED;
}
+static void power_print_header(struct seq_file *s)
+{
+ seq_puts(s, "# TIMESTAMP STATE EVENT\n");
+ seq_puts(s, "# | | |\n");
+}
+
static struct tracer power_tracer __read_mostly =
{
.name = "power",
.stop = stop_power_trace,
.reset = power_trace_reset,
.print_line = power_print_line,
+ .print_header = power_print_header,
};
static int init_power_trace(void)
bool
depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT
select STACKTRACE
- select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND
+ select FRAME_POINTER if !X86 && !MIPS && !PPC && !ARM_UNWIND && !S390
select KALLSYMS
select KALLSYMS_ALL
config FRAME_POINTER
bool "Compile the kernel with frame pointers"
depends on DEBUG_KERNEL && \
- (CRIS || M68K || M68KNOMMU || FRV || UML || S390 || \
+ (CRIS || M68K || M68KNOMMU || FRV || UML || \
AVR32 || SUPERH || BLACKFIN || MN10300) || \
ARCH_WANT_FRAME_POINTERS
default y if (DEBUG_INFO && UML) || ARCH_WANT_FRAME_POINTERS
depends on FAULT_INJECTION_DEBUG_FS && STACKTRACE_SUPPORT
depends on !X86_64
select STACKTRACE
- select FRAME_POINTER if !PPC
+ select FRAME_POINTER if !PPC && !S390
help
Provide stacktrace filter for fault-injection capabilities
config LATENCYTOP
bool "Latency measuring infrastructure"
- select FRAME_POINTER if !MIPS && !PPC
+ select FRAME_POINTER if !MIPS && !PPC && !S390
select KALLSYMS
select KALLSYMS_ALL
select STACKTRACE
default n
depends on PRINTK
depends on DEBUG_FS
- select PRINTK_DEBUG
help
Compiles debug level messages into the kernel, which would not
lib-$(CONFIG_RWSEM_XCHGADD_ALGORITHM) += rwsem.o
lib-$(CONFIG_GENERIC_FIND_FIRST_BIT) += find_next_bit.o
lib-$(CONFIG_GENERIC_FIND_NEXT_BIT) += find_next_bit.o
-lib-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
+obj-$(CONFIG_GENERIC_FIND_LAST_BIT) += find_last_bit.o
obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
obj-$(CONFIG_LOCK_KERNEL) += kernel_lock.o
obj-$(CONFIG_DEBUG_PREEMPT) += smp_processor_id.o
return -ENOMEM;
}
-static int device_dma_allocations(struct device *dev)
-{
- struct dma_debug_entry *entry;
- unsigned long flags;
- int count = 0, i;
-
- for (i = 0; i < HASH_SIZE; ++i) {
- spin_lock_irqsave(&dma_entry_hash[i].lock, flags);
- list_for_each_entry(entry, &dma_entry_hash[i].list, list) {
- if (entry->dev == dev)
- count += 1;
- }
- spin_unlock_irqrestore(&dma_entry_hash[i].lock, flags);
- }
-
- return count;
-}
-
-static int dma_debug_device_change(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- int count;
-
-
- switch (action) {
- case BUS_NOTIFY_UNBIND_DRIVER:
- count = device_dma_allocations(dev);
- if (count == 0)
- break;
- err_printk(dev, NULL, "DMA-API: device driver has pending "
- "DMA allocations while released from device "
- "[count=%d]\n", count);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
void dma_debug_add_bus(struct bus_type *bus)
{
- struct notifier_block *nb;
-
- nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
- if (nb == NULL) {
- printk(KERN_ERR "dma_debug_add_bus: out of memory\n");
- return;
- }
-
- nb->notifier_call = dma_debug_device_change;
-
- bus_register_notifier(bus, nb);
+ /* FIXME: register notifier */
}
/*
const char *old_name = kobj->name;
char *s;
+ if (kobj->name && !fmt)
+ return 0;
+
kobj->name = kvasprintf(GFP_KERNEL, fmt, vargs);
if (!kobj->name)
return -ENOMEM;
goto exit;
retval = call_usermodehelper(argv[0], argv,
- env->envp, UMH_NO_WAIT);
+ env->envp, UMH_WAIT_EXEC);
}
exit:
"kobject_uevent: unable to create netlink socket!\n");
return -ENODEV;
}
-
+ netlink_set_nonroot(NETLINK_KOBJECT_UEVENT, NL_NONROOT_RECV);
return 0;
}
sg_miter_stop(miter);
/* get to the next sg if necessary. __offset is adjusted by stop */
- if (miter->__offset == miter->__sg->length && --miter->__nents) {
- miter->__sg = sg_next(miter->__sg);
- miter->__offset = 0;
+ while (miter->__offset == miter->__sg->length) {
+ if (--miter->__nents) {
+ miter->__sg = sg_next(miter->__sg);
+ miter->__offset = 0;
+ } else
+ return false;
}
/* map the next page */
will use one page flag and increase the code size a little,
say Y unless you know what you are doing.
+ See Documentation/vm/unevictable-lru.txt for more information.
+
config HAVE_MLOCK
bool
default y if MMU=y
config MMU_NOTIFIER
bool
+
+config NOMMU_INITIAL_TRIM_EXCESS
+ int "Turn on mmap() excess space trimming before booting"
+ depends on !MMU
+ default 1
+ help
+ The NOMMU mmap() frequently needs to allocate large contiguous chunks
+ of memory on which to store mappings, but it can only ask the system
+ allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently
+ more than it requires. To deal with this, mmap() is able to trim off
+ the excess and return it to the allocator.
+
+ If trimming is enabled, the excess is trimmed off and returned to the
+ system allocator, which can cause extra fragmentation, particularly
+ if there are a lot of transient processes.
+
+ If trimming is disabled, the excess is kept, but not used, which for
+ long-term mappings means that the space is wasted.
+
+ Trimming can be dynamically controlled through a sysctl option
+ (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of
+ excess pages there must be before trimming should occur, or zero if
+ no trimming is to occur.
+
+ This option specifies the initial value of this option. The default
+ of 1 says that all excess pages should be trimmed.
+
+ See Documentation/nommu-mmap.txt for more information.
}
return err;
}
+EXPORT_SYMBOL(filemap_write_and_wait_range);
/**
* add_to_page_cache_locked - add a locked page to the pagecache
/**
* add_page_wait_queue - Add an arbitrary waiter to a page's wait queue
- * @page - Page defining the wait queue of interest
- * @waiter - Waiter to add to the queue
+ * @page: Page defining the wait queue of interest
+ * @waiter: Waiter to add to the queue
*
* Add an arbitrary @waiter to the wait queue for the nominated @page.
*/
if (unlikely(!mem))
return 0;
- VM_BUG_ON(mem_cgroup_is_obsolete(mem));
+ VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem));
while (1) {
int ret;
return NULL;
pc = lookup_page_cgroup(page);
- /*
- * Used bit of swapcache is solid under page lock.
- */
+ lock_page_cgroup(pc);
if (PageCgroupUsed(pc)) {
mem = pc->mem_cgroup;
if (mem && !css_tryget(&mem->css))
mem = NULL;
rcu_read_unlock();
}
+ unlock_page_cgroup(pc);
return mem;
}
}
/*
- * A call to try to shrink memory usage under specified resource controller.
- * This is typically used for page reclaiming for shmem for reducing side
- * effect of page allocation from shmem, which is used by some mem_cgroup.
+ * A call to try to shrink memory usage on charge failure at shmem's swapin.
+ * Calling hierarchical_reclaim is not enough because we should update
+ * last_oom_jiffies to prevent pagefault_out_of_memory from invoking global OOM.
+ * Moreover considering hierarchy, we should reclaim from the mem_over_limit,
+ * not from the memcg which this page would be charged to.
+ * try_charge_swapin does all of these works properly.
*/
-int mem_cgroup_shrink_usage(struct page *page,
+int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm,
gfp_t gfp_mask)
{
struct mem_cgroup *mem = NULL;
- int progress = 0;
- int retry = MEM_CGROUP_RECLAIM_RETRIES;
+ int ret;
if (mem_cgroup_disabled())
return 0;
- if (page)
- mem = try_get_mem_cgroup_from_swapcache(page);
- if (!mem && mm)
- mem = try_get_mem_cgroup_from_mm(mm);
- if (unlikely(!mem))
- return 0;
- do {
- progress = mem_cgroup_hierarchical_reclaim(mem,
- gfp_mask, true, false);
- progress += mem_cgroup_check_under_limit(mem);
- } while (!progress && --retry);
+ ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem);
+ if (!ret)
+ mem_cgroup_cancel_charge_swapin(mem); /* it does !mem check */
- css_put(&mem->css);
- if (!retry)
- return -ENOMEM;
- return 0;
+ return ret;
}
static DEFINE_MUTEX(set_limit_mutex);
ret = tmp;
goto unwritable_page;
}
+ if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+ lock_page(old_page);
+ if (!old_page->mapping) {
+ ret = 0; /* retry the fault */
+ unlock_page(old_page);
+ goto unwritable_page;
+ }
+ } else
+ VM_BUG_ON(!PageLocked(old_page));
/*
* Since we dropped the lock we need to revalidate
*/
page_table = pte_offset_map_lock(mm, pmd, address,
&ptl);
- page_cache_release(old_page);
- if (!pte_same(*page_table, orig_pte))
+ if (!pte_same(*page_table, orig_pte)) {
+ unlock_page(old_page);
+ page_cache_release(old_page);
goto unlock;
+ }
page_mkwrite = 1;
}
unlock:
pte_unmap_unlock(page_table, ptl);
if (dirty_page) {
- if (vma->vm_file)
- file_update_time(vma->vm_file);
-
/*
* Yes, Virginia, this is actually required to prevent a race
* with clear_page_dirty_for_io() from clearing the page dirty
*
* do_no_page is protected similarly.
*/
- wait_on_page_locked(dirty_page);
- set_page_dirty_balance(dirty_page, page_mkwrite);
+ if (!page_mkwrite) {
+ wait_on_page_locked(dirty_page);
+ set_page_dirty_balance(dirty_page, page_mkwrite);
+ }
put_page(dirty_page);
+ if (page_mkwrite) {
+ struct address_space *mapping = dirty_page->mapping;
+
+ set_page_dirty(dirty_page);
+ unlock_page(dirty_page);
+ page_cache_release(dirty_page);
+ if (mapping) {
+ /*
+ * Some device drivers do not set page.mapping
+ * but still dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+ }
+
+ /* file_update_time outside page_lock */
+ if (vma->vm_file)
+ file_update_time(vma->vm_file);
}
return ret;
oom_free_new:
page_cache_release(new_page);
oom:
- if (old_page)
+ if (old_page) {
+ if (page_mkwrite) {
+ unlock_page(old_page);
+ page_cache_release(old_page);
+ }
page_cache_release(old_page);
+ }
return VM_FAULT_OOM;
unwritable_page:
if (mem_cgroup_try_charge_swapin(mm, page, GFP_KERNEL, &ptr)) {
ret = VM_FAULT_OOM;
- unlock_page(page);
- goto out;
+ goto out_page;
}
/*
out_nomap:
mem_cgroup_cancel_charge_swapin(ptr);
pte_unmap_unlock(page_table, ptl);
+out_page:
unlock_page(page);
page_cache_release(page);
return ret;
int tmp;
unlock_page(page);
- vmf.flags |= FAULT_FLAG_MKWRITE;
+ vmf.flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE;
tmp = vma->vm_ops->page_mkwrite(vma, &vmf);
if (unlikely(tmp &
(VM_FAULT_ERROR | VM_FAULT_NOPAGE))) {
ret = tmp;
- anon = 1; /* no anon but release vmf.page */
- goto out_unlocked;
- }
- lock_page(page);
- /*
- * XXX: this is not quite right (racy vs
- * invalidate) to unlock and relock the page
- * like this, however a better fix requires
- * reworking page_mkwrite locking API, which
- * is better done later.
- */
- if (!page->mapping) {
- ret = 0;
- anon = 1; /* no anon but release vmf.page */
- goto out;
+ goto unwritable_page;
}
+ if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+ lock_page(page);
+ if (!page->mapping) {
+ ret = 0; /* retry the fault */
+ unlock_page(page);
+ goto unwritable_page;
+ }
+ } else
+ VM_BUG_ON(!PageLocked(page));
page_mkwrite = 1;
}
}
pte_unmap_unlock(page_table, ptl);
out:
- unlock_page(vmf.page);
-out_unlocked:
- if (anon)
- page_cache_release(vmf.page);
- else if (dirty_page) {
- if (vma->vm_file)
- file_update_time(vma->vm_file);
+ if (dirty_page) {
+ struct address_space *mapping = page->mapping;
- set_page_dirty_balance(dirty_page, page_mkwrite);
+ if (set_page_dirty(dirty_page))
+ page_mkwrite = 1;
+ unlock_page(dirty_page);
put_page(dirty_page);
+ if (page_mkwrite && mapping) {
+ /*
+ * Some device drivers do not set page.mapping but still
+ * dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+
+ /* file_update_time outside page_lock */
+ if (vma->vm_file)
+ file_update_time(vma->vm_file);
+ } else {
+ unlock_page(vmf.page);
+ if (anon)
+ page_cache_release(vmf.page);
}
return ret;
+
+unwritable_page:
+ page_cache_release(page);
+ return ret;
}
static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
/*
* Check that a process has enough memory to allocate a new virtual
if (mm)
allowed -= mm->total_vm / 32;
- /*
- * cast `allowed' as a signed long because vm_committed_space
- * sometimes has a negative value
- */
- if (atomic_long_read(&vm_committed_space) < (long)allowed)
+ if (percpu_counter_read_positive(&vm_committed_as) < allowed)
return 0;
error:
vm_unacct_memory(pages);
* Overcommit.. This must be the final test, as it will
* update security statistics.
*/
- if (security_vm_enough_memory(grow))
+ if (security_vm_enough_memory_mm(mm, grow))
return -ENOMEM;
/* Ok, everything looks good - let it rip */
*/
void __init mmap_init(void)
{
+ int ret;
+
+ ret = percpu_counter_init(&vm_committed_as, 0);
+ VM_BUG_ON(ret);
}
struct page *mem_map;
unsigned long max_mapnr;
unsigned long num_physpages;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
-int sysctl_nr_trim_pages = 1; /* page trimming behaviour */
+int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
int heap_stack_gap = 0;
atomic_long_t mmap_pages_allocated;
*/
void __init mmap_init(void)
{
+ int ret;
+
+ ret = percpu_counter_init(&vm_committed_as, 0);
+ VM_BUG_ON(ret);
vm_region_jar = KMEM_CACHE(vm_region, SLAB_PANIC);
}
validate_nommu_regions();
- BUG_ON(region->vm_start & ~PAGE_MASK);
-
parent = NULL;
p = &nommu_region_tree.rb_node;
while (*p) {
if (mm)
allowed -= mm->total_vm / 32;
- /*
- * cast `allowed' as a signed long because vm_committed_space
- * sometimes has a negative value
- */
- if (atomic_long_read(&vm_committed_space) < (long)allowed)
+ if (percpu_counter_read_positive(&vm_committed_as) < allowed)
return 0;
+
error:
vm_unacct_memory(pages);
*/
static void __out_of_memory(gfp_t gfp_mask, int order)
{
- if (sysctl_oom_kill_allocating_task) {
- oom_kill_process(current, gfp_mask, order, 0, NULL,
- "Out of memory (oom_kill_allocating_task)");
-
- } else {
- unsigned long points;
- struct task_struct *p;
-
-retry:
- /*
- * Rambo mode: Shoot down a process and hope it solves whatever
- * issues we may have.
- */
- p = select_bad_process(&points, NULL);
+ struct task_struct *p;
+ unsigned long points;
- if (PTR_ERR(p) == -1UL)
+ if (sysctl_oom_kill_allocating_task)
+ if (!oom_kill_process(current, gfp_mask, order, 0, NULL,
+ "Out of memory (oom_kill_allocating_task)"))
return;
+retry:
+ /*
+ * Rambo mode: Shoot down a process and hope it solves whatever
+ * issues we may have.
+ */
+ p = select_bad_process(&points, NULL);
- /* Found nothing?!?! Either we hang forever, or we panic. */
- if (!p) {
- read_unlock(&tasklist_lock);
- panic("Out of memory and no killable processes...\n");
- }
+ if (PTR_ERR(p) == -1UL)
+ return;
- if (oom_kill_process(p, gfp_mask, order, points, NULL,
- "Out of memory"))
- goto retry;
+ /* Found nothing?!?! Either we hang forever, or we panic. */
+ if (!p) {
+ read_unlock(&tasklist_lock);
+ panic("Out of memory and no killable processes...\n");
}
+
+ if (oom_kill_process(p, gfp_mask, order, points, NULL,
+ "Out of memory"))
+ goto retry;
}
/*
static int zone_batchsize(struct zone *zone)
{
+#ifdef CONFIG_MMU
int batch;
/*
* of pages of one half of the possible page colors
* and the other with pages of the other colors.
*/
- batch = (1 << (fls(batch + batch/2)-1)) - 1;
+ batch = rounddown_pow_of_two(batch + batch/2) - 1;
return batch;
+
+#else
+ /* The deferral and batching of frees should be suppressed under NOMMU
+ * conditions.
+ *
+ * The problem is that NOMMU needs to be able to allocate large chunks
+ * of contiguous memory as there's no hardware page translation to
+ * assemble apparent contiguous memory from discontiguous pages.
+ *
+ * Queueing large contiguous runs of pages for batching, however,
+ * causes the pages to actually be freed in smaller chunks. As there
+ * can be a significant delay between the individual batches being
+ * recycled, this leads to the once large chunks of space being
+ * fragmented and becoming unavailable for high-order allocations.
+ */
+ return 0;
+#endif
}
static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
*/
int nr_pdflush_threads = 0;
-/*
- * The max/min number of pdflush threads. R/W by sysctl at
- * /proc/sys/vm/nr_pdflush_threads_max/min
- */
-int nr_pdflush_threads_max __read_mostly = MAX_PDFLUSH_THREADS;
-int nr_pdflush_threads_min __read_mostly = MIN_PDFLUSH_THREADS;
-
-
/*
* The time at which the pdflush thread pool last went empty
*/
* Thread pool management algorithm:
*
* - The minimum and maximum number of pdflush instances are bound
- * by nr_pdflush_threads_min and nr_pdflush_threads_max.
+ * by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
*
* - If there have been no idle pdflush instances for 1 second, create
* a new one.
* To throttle creation, we reset last_empty_jifs.
*/
if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
- if (list_empty(&pdflush_list) &&
- nr_pdflush_threads < nr_pdflush_threads_max) {
- last_empty_jifs = jiffies;
- nr_pdflush_threads++;
- spin_unlock_irq(&pdflush_lock);
- start_one_pdflush_thread();
- spin_lock_irq(&pdflush_lock);
+ if (list_empty(&pdflush_list)) {
+ if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
+ last_empty_jifs = jiffies;
+ nr_pdflush_threads++;
+ spin_unlock_irq(&pdflush_lock);
+ start_one_pdflush_thread();
+ spin_lock_irq(&pdflush_lock);
+ }
}
}
*/
if (list_empty(&pdflush_list))
continue;
- if (nr_pdflush_threads <= nr_pdflush_threads_min)
+ if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
continue;
pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
* Pre-set nr_pdflush_threads... If we fail to create,
* the count will be decremented.
*/
- nr_pdflush_threads = nr_pdflush_threads_min;
+ nr_pdflush_threads = MIN_PDFLUSH_THREADS;
- for (i = 0; i < nr_pdflush_threads_min; i++)
+ for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
start_one_pdflush_thread();
return 0;
}
#include <linux/init.h>
#include <linux/vfs.h>
#include <linux/mount.h>
+#include <linux/pagemap.h>
#include <linux/file.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/exportfs.h>
#include <linux/generic_acl.h>
#include <linux/mman.h>
-#include <linux/pagemap.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/backing-dev.h>
#include <asm/div64.h>
#include <asm/pgtable.h>
+/*
+ * The maximum size of a shmem/tmpfs file is limited by the maximum size of
+ * its triple-indirect swap vector - see illustration at shmem_swp_entry().
+ *
+ * With 4kB page size, maximum file size is just over 2TB on a 32-bit kernel,
+ * but one eighth of that on a 64-bit kernel. With 8kB page size, maximum
+ * file size is just over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel,
+ * MAX_LFS_FILESIZE being then more restrictive than swap vector layout.
+ *
+ * We use / and * instead of shifts in the definitions below, so that the swap
+ * vector can be tested with small even values (e.g. 20) for ENTRIES_PER_PAGE.
+ */
#define ENTRIES_PER_PAGE (PAGE_CACHE_SIZE/sizeof(unsigned long))
-#define ENTRIES_PER_PAGEPAGE (ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
-#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512)
+#define ENTRIES_PER_PAGEPAGE ((unsigned long long)ENTRIES_PER_PAGE*ENTRIES_PER_PAGE)
-#define SHMEM_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
-#define SHMEM_MAX_BYTES ((unsigned long long)SHMEM_MAX_INDEX << PAGE_CACHE_SHIFT)
+#define SHMSWP_MAX_INDEX (SHMEM_NR_DIRECT + (ENTRIES_PER_PAGEPAGE/2) * (ENTRIES_PER_PAGE+1))
+#define SHMSWP_MAX_BYTES (SHMSWP_MAX_INDEX << PAGE_CACHE_SHIFT)
+#define SHMEM_MAX_BYTES min_t(unsigned long long, SHMSWP_MAX_BYTES, MAX_LFS_FILESIZE)
+#define SHMEM_MAX_INDEX ((unsigned long)((SHMEM_MAX_BYTES+1) >> PAGE_CACHE_SHIFT))
+
+#define BLOCKS_PER_PAGE (PAGE_CACHE_SIZE/512)
#define VM_ACCT(size) (PAGE_CACHE_ALIGN(size) >> PAGE_SHIFT)
/* info->flags needs VM_flags to handle pagein/truncate races efficiently */
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
if (error == -ENOMEM) {
- /* allow reclaim from this memory cgroup */
- error = mem_cgroup_shrink_usage(swappage,
+ /*
+ * reclaim from proper memory cgroup and
+ * call memcg's OOM if needed.
+ */
+ error = mem_cgroup_shmem_charge_fallback(
+ swappage,
current->mm,
gfp);
if (error) {
#define shmem_get_inode(sb, mode, dev, flags) ramfs_get_inode(sb, mode, dev)
#define shmem_acct_size(flags, size) 0
#define shmem_unacct_size(flags, size) do {} while (0)
-#define SHMEM_MAX_BYTES LLONG_MAX
+#define SHMEM_MAX_BYTES MAX_LFS_FILESIZE
#endif /* CONFIG_SHMEM */
EXPORT_SYMBOL(pagevec_lookup_tag);
-#ifdef CONFIG_SMP
-/*
- * We tolerate a little inaccuracy to avoid ping-ponging the counter between
- * CPUs
- */
-#define ACCT_THRESHOLD max(16, NR_CPUS * 2)
-
-static DEFINE_PER_CPU(long, committed_space);
-
-void vm_acct_memory(long pages)
-{
- long *local;
-
- preempt_disable();
- local = &__get_cpu_var(committed_space);
- *local += pages;
- if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) {
- atomic_long_add(*local, &vm_committed_space);
- *local = 0;
- }
- preempt_enable();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Drop the CPU's cached committed space back into the central pool. */
-static int cpu_swap_callback(struct notifier_block *nfb,
- unsigned long action,
- void *hcpu)
-{
- long *committed;
-
- committed = &per_cpu(committed_space, (long)hcpu);
- if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) {
- atomic_long_add(*committed, &vm_committed_space);
- *committed = 0;
- drain_cpu_pagevecs((long)hcpu);
- }
- return NOTIFY_OK;
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-#endif /* CONFIG_SMP */
-
/*
* Perform any setup for the swap system
*/
* Right now other parts of the system means that we
* _really_ don't want to cluster much more
*/
-#ifdef CONFIG_HOTPLUG_CPU
- hotcpu_notifier(cpu_swap_callback, 0);
-#endif
}
}
#endif
+/**
+ * get_user_pages_fast() - pin user pages in memory
+ * @start: starting user address
+ * @nr_pages: number of pages from start to pin
+ * @write: whether pages will be written to
+ * @pages: array that receives pointers to the pages pinned.
+ * Should be at least nr_pages long.
+ *
+ * Attempt to pin user pages in memory without taking mm->mmap_sem.
+ * If not successful, it will fall back to taking the lock and
+ * calling get_user_pages().
+ *
+ * Returns number of pages pinned. This may be fewer than the number
+ * requested. If nr_pages is 0 or negative, returns 0. If no pages
+ * were pinned, returns -errno.
+ */
int __attribute__((weak)) get_user_pages_fast(unsigned long start,
int nr_pages, int write, struct page **pages)
{
printk(KERN_WARNING
"vmap allocation for size %lu failed: "
"use vmalloc=<size> to increase size.\n", size);
+ kfree(va);
return ERR_PTR(-EBUSY);
}
/* Can mapped pages be reclaimed? */
int may_unmap;
+ /* Can pages be swapped as part of reclaim? */
+ int may_swap;
+
/* This context's SWAP_CLUSTER_MAX. If freeing memory for
* suspend, we effectively ignore SWAP_CLUSTER_MAX.
* In this context, it doesn't matter that we scan the
struct zone_reclaim_stat *reclaim_stat = get_reclaim_stat(zone, sc);
/* If we have no swap space, do not bother scanning anon pages. */
- if (nr_swap_pages <= 0) {
+ if (!sc->may_swap || (nr_swap_pages <= 0)) {
percent[0] = 0;
percent[1] = 100;
return;
for_each_evictable_lru(l) {
int file = is_file_lru(l);
- int scan;
+ unsigned long scan;
scan = zone_nr_pages(zone, sc, l);
if (priority) {
.may_writepage = !laptop_mode,
.swap_cluster_max = SWAP_CLUSTER_MAX,
.may_unmap = 1,
+ .may_swap = 1,
.swappiness = vm_swappiness,
.order = order,
.mem_cgroup = NULL,
struct scan_control sc = {
.may_writepage = !laptop_mode,
.may_unmap = 1,
+ .may_swap = !noswap,
.swap_cluster_max = SWAP_CLUSTER_MAX,
.swappiness = swappiness,
.order = 0,
};
struct zonelist *zonelist;
- if (noswap)
- sc.may_unmap = 0;
-
sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) |
(GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK);
zonelist = NODE_DATA(numa_node_id())->node_zonelists;
struct scan_control sc = {
.gfp_mask = GFP_KERNEL,
.may_unmap = 1,
+ .may_swap = 1,
.swap_cluster_max = SWAP_CLUSTER_MAX,
.swappiness = vm_swappiness,
.order = order,
nr_reclaimed += shrink_list(l, nr_to_scan, zone,
sc, prio);
if (nr_reclaimed >= nr_pages) {
- sc->nr_reclaimed = nr_reclaimed;
+ sc->nr_reclaimed += nr_reclaimed;
return;
}
}
}
}
- sc->nr_reclaimed = nr_reclaimed;
+ sc->nr_reclaimed += nr_reclaimed;
}
/*
.may_unmap = 0,
.may_writepage = 1,
.isolate_pages = isolate_pages_global,
+ .nr_reclaimed = 0,
};
current->reclaim_state = &reclaim_state;
struct scan_control sc = {
.may_writepage = !!(zone_reclaim_mode & RECLAIM_WRITE),
.may_unmap = !!(zone_reclaim_mode & RECLAIM_SWAP),
+ .may_swap = 1,
.swap_cluster_max = max_t(unsigned long, nr_pages,
SWAP_CLUSTER_MAX),
.gfp_mask = gfp_mask,
p9pdu_reset(req->tc);
p9pdu_reset(req->rc);
- req->flush_tag = 0;
req->tc->tag = tag-1;
req->status = REQ_STATUS_ALLOC;
*/
void p9_client_cb(struct p9_client *c, struct p9_req_t *req)
{
- struct p9_req_t *other_req;
- unsigned long flags;
-
P9_DPRINTK(P9_DEBUG_MUX, " tag %d\n", req->tc->tag);
-
- if (req->status == REQ_STATUS_ERROR)
- wake_up(req->wq);
-
- if (req->flush_tag) { /* flush receive path */
- P9_DPRINTK(P9_DEBUG_9P, "<<< RFLUSH %d\n", req->tc->tag);
- spin_lock_irqsave(&c->lock, flags);
- other_req = p9_tag_lookup(c, req->flush_tag);
- if (other_req->status != REQ_STATUS_FLSH) /* stale flush */
- spin_unlock_irqrestore(&c->lock, flags);
- else {
- other_req->status = REQ_STATUS_FLSHD;
- spin_unlock_irqrestore(&c->lock, flags);
- wake_up(other_req->wq);
- }
- p9_free_req(c, req);
- } else { /* normal receive path */
- P9_DPRINTK(P9_DEBUG_MUX, "normal: tag %d\n", req->tc->tag);
- spin_lock_irqsave(&c->lock, flags);
- if (req->status != REQ_STATUS_FLSHD)
- req->status = REQ_STATUS_RCVD;
- spin_unlock_irqrestore(&c->lock, flags);
- wake_up(req->wq);
- P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
- }
+ wake_up(req->wq);
+ P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
}
EXPORT_SYMBOL(p9_client_cb);
if (IS_ERR(req))
return PTR_ERR(req);
- req->flush_tag = oldtag;
- /* we don't free anything here because RPC isn't complete */
+ /* if we haven't received a response for oldreq,
+ remove it from the list. */
+ spin_lock(&c->lock);
+ if (oldreq->status == REQ_STATUS_FLSH)
+ list_del(&oldreq->req_list);
+ spin_unlock(&c->lock);
+
+ p9_free_req(c, req);
return 0;
}
struct p9_req_t *req;
unsigned long flags;
int sigpending;
- int flushed = 0;
P9_DPRINTK(P9_DEBUG_MUX, "client %p op %d\n", c, type);
goto reterr;
}
- /* if it was a flush we just transmitted, return our tag */
- if (type == P9_TFLUSH)
- return req;
-again:
P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d\n", req->wq, tag);
err = wait_event_interruptible(*req->wq,
req->status >= REQ_STATUS_RCVD);
- P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d (flushed=%d)\n",
- req->wq, tag, err, flushed);
+ P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d\n",
+ req->wq, tag, err);
if (req->status == REQ_STATUS_ERROR) {
P9_DPRINTK(P9_DEBUG_ERROR, "req_status error %d\n", req->t_err);
err = req->t_err;
- } else if (err == -ERESTARTSYS && flushed) {
- P9_DPRINTK(P9_DEBUG_MUX, "flushed - going again\n");
- goto again;
- } else if (req->status == REQ_STATUS_FLSHD) {
- P9_DPRINTK(P9_DEBUG_MUX, "flushed - erestartsys\n");
- err = -ERESTARTSYS;
}
- if ((err == -ERESTARTSYS) && (c->status == Connected) && (!flushed)) {
+ if ((err == -ERESTARTSYS) && (c->status == Connected)) {
P9_DPRINTK(P9_DEBUG_MUX, "flushing\n");
- spin_lock_irqsave(&c->lock, flags);
- if (req->status == REQ_STATUS_SENT)
- req->status = REQ_STATUS_FLSH;
- spin_unlock_irqrestore(&c->lock, flags);
sigpending = 1;
- flushed = 1;
clear_thread_flag(TIF_SIGPENDING);
- if (c->trans_mod->cancel(c, req)) {
- err = p9_client_flush(c, req);
- if (err == 0)
- goto again;
- }
+ if (c->trans_mod->cancel(c, req))
+ p9_client_flush(c, req);
+
+ /* if we received the response anyway, don't signal error */
+ if (req->status == REQ_STATUS_RCVD)
+ err = 0;
}
if (sigpending) {
ret->name, ret->uid, ret->gid, ret->muid, ret->extension,
ret->n_uid, ret->n_gid, ret->n_muid);
+ p9_free_req(clnt, req);
+ return ret;
+
free_and_error:
p9_free_req(clnt, req);
error:
- return ret;
+ kfree(ret);
+ return ERR_PTR(err);
}
EXPORT_SYMBOL(p9_client_stat);
+static int p9_client_statsize(struct p9_wstat *wst, int optional)
+{
+ int ret;
+
+ /* size[2] type[2] dev[4] qid[13] */
+ /* mode[4] atime[4] mtime[4] length[8]*/
+ /* name[s] uid[s] gid[s] muid[s] */
+ ret = 2+2+4+13+4+4+4+8+2+2+2+2;
+
+ if (wst->name)
+ ret += strlen(wst->name);
+ if (wst->uid)
+ ret += strlen(wst->uid);
+ if (wst->gid)
+ ret += strlen(wst->gid);
+ if (wst->muid)
+ ret += strlen(wst->muid);
+
+ if (optional) {
+ ret += 2+4+4+4; /* extension[s] n_uid[4] n_gid[4] n_muid[4] */
+ if (wst->extension)
+ ret += strlen(wst->extension);
+ }
+
+ return ret;
+}
+
int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst)
{
int err;
struct p9_req_t *req;
struct p9_client *clnt;
+ err = 0;
+ clnt = fid->clnt;
+ wst->size = p9_client_statsize(wst, clnt->dotu);
P9_DPRINTK(P9_DEBUG_9P, ">>> TWSTAT fid %d\n", fid->fid);
P9_DPRINTK(P9_DEBUG_9P,
" sz=%x type=%x dev=%x qid=%x.%llx.%x\n"
wst->atime, wst->mtime, (unsigned long long)wst->length,
wst->name, wst->uid, wst->gid, wst->muid, wst->extension,
wst->n_uid, wst->n_gid, wst->n_muid);
- err = 0;
- clnt = fid->clnt;
- req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, 0, wst);
+ req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto error;
spin_unlock_irqrestore(&m->client->lock, flags);
list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
- list_del(&req->req_list);
P9_DPRINTK(P9_DEBUG_ERROR, "call back req %p\n", req);
+ list_del(&req->req_list);
p9_client_cb(m->client, req);
}
}
"mux %p pkt: size: %d bytes tag: %d\n", m, n, tag);
m->req = p9_tag_lookup(m->client, tag);
- if (!m->req) {
+ if (!m->req || (m->req->status != REQ_STATUS_SENT &&
+ m->req->status != REQ_STATUS_FLSH)) {
P9_DPRINTK(P9_DEBUG_ERROR, "Unexpected packet tag %d\n",
tag);
err = -EIO;
if ((m->req) && (m->rpos == m->rsize)) { /* packet is read in */
P9_DPRINTK(P9_DEBUG_TRANS, "got new packet\n");
spin_lock(&m->client->lock);
+ if (m->req->status != REQ_STATUS_ERROR)
+ m->req->status = REQ_STATUS_RCVD;
list_del(&m->req->req_list);
spin_unlock(&m->client->lock);
p9_client_cb(m->client, m->req);
-
m->rbuf = NULL;
m->rpos = 0;
m->rsize = 0;
req = list_entry(m->unsent_req_list.next, struct p9_req_t,
req_list);
req->status = REQ_STATUS_SENT;
+ P9_DPRINTK(P9_DEBUG_TRANS, "move req %p\n", req);
list_move_tail(&req->req_list, &m->req_list);
m->wbuf = req->tc->sdata;
P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req);
spin_lock(&client->lock);
- list_del(&req->req_list);
if (req->status == REQ_STATUS_UNSENT) {
+ list_del(&req->req_list);
req->status = REQ_STATUS_FLSHD;
ret = 0;
- }
+ } else if (req->status == REQ_STATUS_SENT)
+ req->status = REQ_STATUS_FLSH;
spin_unlock(&client->lock);
goto err_out;
req->rc = c->rc;
+ req->status = REQ_STATUS_RCVD;
p9_client_cb(client, req);
return;
P9_DPRINTK(P9_DEBUG_TRANS, ": rc %p\n", rc);
P9_DPRINTK(P9_DEBUG_TRANS, ": lookup tag %d\n", rc->tag);
req = p9_tag_lookup(chan->client, rc->tag);
+ req->status = REQ_STATUS_RCVD;
p9_client_cb(chan->client, req);
}
}
for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
sband = hw->wiphy->bands[i];
- if (sband->n_bitrates > max_rates)
+ if (sband && sband->n_bitrates > max_rates)
max_rates = sband->n_bitrates;
}
for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
sband = hw->wiphy->bands[i];
- if (sband->n_bitrates > max_rates)
+ if (sband && sband->n_bitrates > max_rates)
max_rates = sband->n_bitrates;
}
void rds_rdma_unuse(struct rds_sock *rs, u32 r_key, int force);
/* stats.c */
-DECLARE_PER_CPU(struct rds_statistics, rds_stats);
+DECLARE_PER_CPU_SHARED_ALIGNED(struct rds_statistics, rds_stats);
#define rds_stats_inc_which(which, member) do { \
per_cpu(which, get_cpu()).member++; \
put_cpu(); \
if (test_and_set_bit(XPRT_LOCKED, &xprt->state))
goto out_abort;
spin_unlock(&xprt->transport_lock);
- if (xprt_connecting(xprt))
- xprt_release_write(xprt, NULL);
- else
- queue_work(rpciod_workqueue, &xprt->task_cleanup);
+ set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+ queue_work(rpciod_workqueue, &xprt->task_cleanup);
return;
out_abort:
spin_unlock(&xprt->transport_lock);
frmr->page_list->page_list[page_no] =
ib_dma_map_single(xprt->sc_cm_id->device,
page_address(rqstp->rq_arg.pages[page_no]),
- PAGE_SIZE, DMA_TO_DEVICE);
+ PAGE_SIZE, DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device,
frmr->page_list->page_list[page_no]))
goto fatal_err;
fatal_err:
printk("svcrdma: Error fast registering memory for xprt %p\n", xprt);
+ vec->frmr = NULL;
svc_rdma_put_frmr(xprt, frmr);
return -EIO;
}
"svcrdma: could not post a receive buffer, err=%d."
"Closing transport %p.\n", ret, rdma);
set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ svc_rdma_put_frmr(rdma, vec->frmr);
svc_rdma_put_context(ctxt, 0);
return -ENOTCONN;
}
return 0;
err:
+ svc_rdma_unmap_dma(ctxt);
svc_rdma_put_frmr(rdma, vec->frmr);
svc_rdma_put_context(ctxt, 1);
return -EIO;
svc_xprt_get(&xprt->sc_xprt);
ret = ib_post_recv(xprt->sc_qp, &recv_wr, &bad_recv_wr);
if (ret) {
- svc_xprt_put(&xprt->sc_xprt);
+ svc_rdma_unmap_dma(ctxt);
svc_rdma_put_context(ctxt, 1);
+ svc_xprt_put(&xprt->sc_xprt);
}
return ret;
*
* This is used when all requests are complete; ie, no DRC state remains
* on the server we want to save.
+ *
+ * The caller _must_ be holding XPRT_LOCKED in order to avoid issues with
+ * xs_reset_transport() zeroing the socket from underneath a writer.
*/
static void xs_close(struct rpc_xprt *xprt)
{
xprt_disconnect_done(xprt);
}
+static void xs_tcp_close(struct rpc_xprt *xprt)
+{
+ if (test_and_clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state))
+ xs_close(xprt);
+ else
+ xs_tcp_shutdown(xprt);
+}
+
/**
* xs_destroy - prepare to shutdown a transport
* @xprt: doomed transport
xprt, -status, xprt_connected(xprt),
sock->sk->sk_state);
switch (status) {
+ default:
+ printk("%s: connect returned unhandled error %d\n",
+ __func__, status);
+ case -EADDRNOTAVAIL:
+ /* We're probably in TIME_WAIT. Get rid of existing socket,
+ * and retry
+ */
+ set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+ xprt_force_disconnect(xprt);
case -ECONNREFUSED:
case -ECONNRESET:
case -ENETUNREACH:
xprt_clear_connecting(xprt);
return;
}
- /* get rid of existing socket, and retry */
- xs_tcp_shutdown(xprt);
- printk("%s: connect returned unhandled error %d\n",
- __func__, status);
out_eagain:
status = -EAGAIN;
out:
.buf_free = rpc_free,
.send_request = xs_tcp_send_request,
.set_retrans_timeout = xprt_set_retrans_timeout_def,
- .close = xs_tcp_shutdown,
+ .close = xs_tcp_close,
.destroy = xs_destroy,
.print_stats = xs_tcp_print_stats,
};
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
+subdir-$(CONFIG_DTC) += dtc
# Let clean descend into subdirs
subdir- += basic kconfig package selinux
cppflags-y :=
ldflags-y :=
+subdir-asflags-y :=
+subdir-ccflags-y :=
+
# Read auto.conf if it exists, otherwise ignore
-include include/config/auto.conf
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y += $(EXTRA_LDFLAGS)
+#
+# flags that take effect in sub directories
+export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
+export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
+
# Figure out what we need to build from the various variables
# ===========================================================================
debug_flags =
endif
-orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) \
+orig_c_flags = $(KBUILD_CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
$(ccflags-y) $(CFLAGS_$(basetarget).o)
_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
-_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) \
+_a_flags = $(KBUILD_CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
$(asflags-y) $(AFLAGS_$(basetarget).o)
_cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
--- /dev/null
+# scripts/dtc makefile
+
+hostprogs-y := dtc
+always := $(hostprogs-y)
+
+dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
+ srcpos.o checks.o
+dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
+
+# Source files need to get at the userspace version of libfdt_env.h to compile
+
+HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt
+
+HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC)
+
+HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC)
+
+# dependencies on generated files need to be listed explicitly
+$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h
+$(obj)/dtc-lexer.lex.o: $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h
+
+targets += dtc-parser.tab.c dtc-lexer.lex.c
+
+clean-files += dtc-parser.tab.h
+
+# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output
+
+ifdef GENERATE_PARSER
+
+BISON = bison
+FLEX = flex
+
+quiet_cmd_bison = BISON $@
+ cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
+quiet_cmd_flex = FLEX $@
+ cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
+
+$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE
+ $(call if_changed,bison)
+
+$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c
+
+$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE
+ $(call if_changed,flex)
+
+endif
my $file = shift;
my $nested;
- if ($x =~/(struct|union)\s+(\w+)\s*{(.*)}/) {
+ if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) {
+ #my $decl_type = $1;
$declaration_name = $2;
my $members = $3;
$nested = $1;
# ignore members marked private:
- $members =~ s/\/\*.*?private:.*?public:.*?\*\///gos;
- $members =~ s/\/\*.*?private:.*//gos;
+ $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos;
+ $members =~ s/\/\*\s*private:.*//gos;
# strip comments:
$members =~ s/\/\*.*?\*\///gos;
$nested =~ s/\/\*.*?\*\///gos;
return 0;
}
/* Fix endianness in ELF header */
- hdr->e_shoff = TO_NATIVE(hdr->e_shoff);
- hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx);
- hdr->e_shnum = TO_NATIVE(hdr->e_shnum);
- hdr->e_machine = TO_NATIVE(hdr->e_machine);
- hdr->e_type = TO_NATIVE(hdr->e_type);
+ hdr->e_type = TO_NATIVE(hdr->e_type);
+ hdr->e_machine = TO_NATIVE(hdr->e_machine);
+ hdr->e_version = TO_NATIVE(hdr->e_version);
+ hdr->e_entry = TO_NATIVE(hdr->e_entry);
+ hdr->e_phoff = TO_NATIVE(hdr->e_phoff);
+ hdr->e_shoff = TO_NATIVE(hdr->e_shoff);
+ hdr->e_flags = TO_NATIVE(hdr->e_flags);
+ hdr->e_ehsize = TO_NATIVE(hdr->e_ehsize);
+ hdr->e_phentsize = TO_NATIVE(hdr->e_phentsize);
+ hdr->e_phnum = TO_NATIVE(hdr->e_phnum);
+ hdr->e_shentsize = TO_NATIVE(hdr->e_shentsize);
+ hdr->e_shnum = TO_NATIVE(hdr->e_shnum);
+ hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx);
sechdrs = (void *)hdr + hdr->e_shoff;
info->sechdrs = sechdrs;
/* Fix endianness in section headers */
for (i = 0; i < hdr->e_shnum; i++) {
- sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type);
- sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset);
- sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size);
- sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link);
- sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name);
- sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info);
- sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr);
+ sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name);
+ sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type);
+ sechdrs[i].sh_flags = TO_NATIVE(sechdrs[i].sh_flags);
+ sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr);
+ sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset);
+ sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size);
+ sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link);
+ sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info);
+ sechdrs[i].sh_addralign = TO_NATIVE(sechdrs[i].sh_addralign);
+ sechdrs[i].sh_entsize = TO_NATIVE(sechdrs[i].sh_entsize);
}
/* Find symbol table. */
for (i = 1; i < hdr->e_shnum; i++) {
/* sections that we do not want to do full section mismatch check on */
static const char *section_white_list[] =
- { ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
+{
+ ".comment*",
+ ".debug*",
+ ".mdebug*", /* alpha, score, mips etc. */
+ ".pdr", /* alpha, score, mips etc. */
+ ".stab*",
+ ".note*",
+ ".got*",
+ ".toc*",
+ NULL
+};
/*
- * Is this section one we do not want to check?
- * This is often debug sections.
- * If we are going to check this section then
- * test if section name ends with a dot and a number.
- * This is used to find sections where the linker have
- * appended a dot-number to make the name unique.
+ * This is used to find sections missing the SHF_ALLOC flag.
* The cause of this is often a section specified in assembler
- * without "ax" / "aw" and the same section used in .c
- * code where gcc add these.
+ * without "ax" / "aw".
*/
-static int check_section(const char *modname, const char *sec)
-{
- const char *e = sec + strlen(sec) - 1;
- if (match(sec, section_white_list))
- return 1;
-
- if (*e && isdigit(*e)) {
- /* consume all digits */
- while (*e && e != sec && isdigit(*e))
- e--;
- if (*e == '.' && !strstr(sec, ".linkonce")) {
- warn("%s (%s): unexpected section name.\n"
- "The (.[number]+) following section name are "
- "ld generated and not expected.\n"
- "Did you forget to use \"ax\"/\"aw\" "
- "in a .S file?\n"
- "Note that for example <linux/init.h> contains\n"
- "section definitions for use in .S files.\n\n",
- modname, sec);
- }
+static void check_section(const char *modname, struct elf_info *elf,
+ Elf_Shdr *sechdr)
+{
+ const char *sec = sech_name(elf, sechdr);
+
+ if (sechdr->sh_type == SHT_PROGBITS &&
+ !(sechdr->sh_flags & SHF_ALLOC) &&
+ !match(sec, section_white_list)) {
+ warn("%s (%s): unexpected non-allocatable section.\n"
+ "Did you forget to use \"ax\"/\"aw\" in a .S file?\n"
+ "Note that for example <linux/init.h> contains\n"
+ "section definitions for use in .S files.\n\n",
+ modname, sec);
}
- return 0;
}
/* data section */
static const char *data_sections[] = { DATA_SECTIONS, NULL };
-/* sections that may refer to an init/exit section with no warning */
-static const char *initref_sections[] =
-{
- ".text.init.refok*",
- ".exit.text.refok*",
- ".data.init.refok*",
- NULL
-};
-
/* symbols in .data that may refer to init/exit sections */
static const char *symbol_white_list[] =
/**
* Whitelist to allow certain references to pass with no warning.
*
- * Pattern 0:
- * Do not warn if funtion/data are marked with __init_refok/__initdata_refok.
- * The pattern is identified by:
- * fromsec = .text.init.refok* | .data.init.refok*
- *
* Pattern 1:
* If a module parameter is declared __initdata and permissions=0
* then this is legal despite the warning generated.
* *probe_one, *_console, *_timer
*
* Pattern 3:
- * Whitelist all refereces from .text.head to .init.data
- * Whitelist all refereces from .text.head to .init.text
+ * Whitelist all references from .head.text to any init section
*
* Pattern 4:
* Some symbols belong to init section but still it is ok to reference
static int secref_whitelist(const char *fromsec, const char *fromsym,
const char *tosec, const char *tosym)
{
- /* Check for pattern 0 */
- if (match(fromsec, initref_sections))
- return 0;
-
/* Check for pattern 1 */
if (match(tosec, init_data_sections) &&
match(fromsec, data_sections) &&
fromsec = sech_name(elf, sechdr);
fromsec += strlen(".rela");
/* if from section (name) is know good then skip it */
- if (check_section(modname, fromsec))
+ if (match(fromsec, section_white_list))
return;
for (rela = start; rela < stop; rela++) {
fromsec = sech_name(elf, sechdr);
fromsec += strlen(".rel");
/* if from section (name) is know good then skip it */
- if (check_section(modname, fromsec))
+ if (match(fromsec, section_white_list))
return;
for (rel = start; rel < stop; rel++) {
/* Walk through all sections */
for (i = 0; i < elf->hdr->e_shnum; i++) {
+ check_section(modname, elf, &elf->sechdrs[i]);
/* We want to process only relocation sections and not .init */
if (sechdrs[i].sh_type == SHT_RELA)
section_rela(modname, elf, &elf->sechdrs[i]);
if (!mod->skip)
add_marker(mod, marker, fmt);
}
+ release_file(file, size);
return;
fail:
fatal("parse error in markers list file\n");
# Check for git and a git repo.
if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
- # Do we have an untagged version?
- if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
- if tag=`git describe 2>/dev/null`; then
- echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
- else
- printf '%s%s' -g $head
- fi
+ # Do we have an untagged tag?
+ if atag=`git describe 2>/dev/null`; then
+ echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+ # add -g${head}, if there is no usable tag
+ else
+ printf '%s%s' -g $head
fi
# Is this git on svn?
;;
"tags")
+ rm -f tags
xtags ctags
;;
"TAGS")
+ rm -f TAGS
xtags etags
;;
esac
struct fown_struct *fown, int signum)
{
struct file *file;
- u32 sid = current_sid();
+ u32 sid = task_sid(tsk);
u32 perm;
struct file_security_struct *fsec;
strcmp(name, XATTR_NAME_SMACKIPOUT) == 0) {
if (!capable(CAP_MAC_ADMIN))
rc = -EPERM;
- /* a label cannot be void and cannot begin with '-' */
- if (size == 0 || (size > 0 && ((char *)value)[0] == '-'))
+ /*
+ * check label validity here so import wont fail on
+ * post_setxattr
+ */
+ if (size == 0 || size >= SMK_LABELLEN ||
+ smk_import(value, size) == NULL)
rc = -EINVAL;
} else
rc = cap_inode_setxattr(dentry, name, value, size, flags);
if (strcmp(name, XATTR_NAME_SMACK))
return;
- if (size >= SMK_LABELLEN)
- return;
-
isp = dentry->d_inode->i_security;
/*
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
* policies are not loaded yet.
* Thus, let do_execve() call this function everytime.
*/
- struct nameidata nd;
+ struct path path;
- if (path_lookup(tomoyo_loader, LOOKUP_FOLLOW, &nd)) {
+ if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) {
printk(KERN_INFO "Not activating Mandatory Access Control now "
"since %s doesn't exist.\n", tomoyo_loader);
return false;
}
- path_put(&nd.path);
+ path_put(&path);
return true;
}
envp[2] = NULL;
call_usermodehelper(argv[0], argv, envp, 1);
- printk(KERN_INFO "TOMOYO: 2.2.0-pre 2009/02/01\n");
+ printk(KERN_INFO "TOMOYO: 2.2.0 2009/04/01\n");
printk(KERN_INFO "Mandatory Access Control activated.\n");
tomoyo_policy_loaded = true;
{ /* Check all profiles currently assigned to domains are defined. */
static int tomoyo_read_version(struct tomoyo_io_buffer *head)
{
if (!head->read_eof) {
- tomoyo_io_printf(head, "2.2.0-pre");
+ tomoyo_io_printf(head, "2.2.0");
head->read_eof = true;
}
return 0;
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*/
char *tomoyo_realpath(const char *pathname)
{
- struct nameidata nd;
+ struct path path;
- if (pathname && path_lookup(pathname, LOOKUP_FOLLOW, &nd) == 0) {
- char *buf = tomoyo_realpath_from_path(&nd.path);
- path_put(&nd.path);
+ if (pathname && kern_path(pathname, LOOKUP_FOLLOW, &path) == 0) {
+ char *buf = tomoyo_realpath_from_path(&path);
+ path_put(&path);
return buf;
}
return NULL;
*/
char *tomoyo_realpath_nofollow(const char *pathname)
{
- struct nameidata nd;
+ struct path path;
- if (pathname && path_lookup(pathname, 0, &nd) == 0) {
- char *buf = tomoyo_realpath_from_path(&nd.path);
- path_put(&nd.path);
+ if (pathname && kern_path(pathname, 0, &path) == 0) {
+ char *buf = tomoyo_realpath_from_path(&path);
+ path_put(&path);
return buf;
}
return NULL;
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
*
* Copyright (C) 2005-2009 NTT DATA CORPORATION
*
- * Version: 2.2.0-pre 2009/02/01
+ * Version: 2.2.0 2009/04/01
*
*/
struct onyx {
/* cache registers 65 to 80, they are write-only! */
u8 cache[16];
- struct i2c_client i2c;
+ struct i2c_client *i2c;
struct aoa_codec codec;
u32 initialised:1,
spdif_locked:1,
*value = onyx->cache[reg-FIRSTREGISTER];
return 0;
}
- v = i2c_smbus_read_byte_data(&onyx->i2c, reg);
+ v = i2c_smbus_read_byte_data(onyx->i2c, reg);
if (v < 0)
return -1;
*value = (u8)v;
{
int result;
- result = i2c_smbus_write_byte_data(&onyx->i2c, reg, value);
+ result = i2c_smbus_write_byte_data(onyx->i2c, reg, value);
if (!result)
onyx->cache[reg-FIRSTREGISTER] = value;
return result;
onyx->codec.soundbus_dev->detach_codec(onyx->codec.soundbus_dev, onyx);
}
-static struct i2c_driver onyx_driver;
-
static int onyx_create(struct i2c_adapter *adapter,
struct device_node *node,
int addr)
{
+ struct i2c_board_info info;
+ struct i2c_client *client;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "aoa_codec_onyx", I2C_NAME_SIZE);
+ info.addr = addr;
+ info.platform_data = node;
+ client = i2c_new_device(adapter, &info);
+ if (!client)
+ return -ENODEV;
+
+ /*
+ * We know the driver is already loaded, so the device should be
+ * already bound. If not it means binding failed, which suggests
+ * the device doesn't really exist and should be deleted.
+ * Ideally this would be replaced by better checks _before_
+ * instantiating the device.
+ */
+ if (!client->driver) {
+ i2c_unregister_device(client);
+ return -ENODEV;
+ }
+
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&client->detected, &client->driver->clients);
+ return 0;
+}
+
+static int onyx_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device_node *node = client->dev.platform_data;
struct onyx *onyx;
u8 dummy;
return -ENOMEM;
mutex_init(&onyx->mutex);
- onyx->i2c.driver = &onyx_driver;
- onyx->i2c.adapter = adapter;
- onyx->i2c.addr = addr & 0x7f;
- strlcpy(onyx->i2c.name, "onyx audio codec", I2C_NAME_SIZE);
-
- if (i2c_attach_client(&onyx->i2c)) {
- printk(KERN_ERR PFX "failed to attach to i2c\n");
- goto fail;
- }
+ onyx->i2c = client;
+ i2c_set_clientdata(client, onyx);
/* we try to read from register ONYX_REG_CONTROL
* to check if the codec is present */
if (onyx_read_register(onyx, ONYX_REG_CONTROL, &dummy) != 0) {
- i2c_detach_client(&onyx->i2c);
printk(KERN_ERR PFX "failed to read control register\n");
goto fail;
}
onyx->codec.node = of_node_get(node);
if (aoa_codec_register(&onyx->codec)) {
- i2c_detach_client(&onyx->i2c);
goto fail;
}
printk(KERN_DEBUG PFX "created and attached onyx instance\n");
return 0;
fail:
+ i2c_set_clientdata(client, NULL);
kfree(onyx);
- return -EINVAL;
+ return -ENODEV;
}
static int onyx_i2c_attach(struct i2c_adapter *adapter)
return onyx_create(adapter, NULL, 0x47);
}
-static int onyx_i2c_detach(struct i2c_client *client)
+static int onyx_i2c_remove(struct i2c_client *client)
{
- struct onyx *onyx = container_of(client, struct onyx, i2c);
- int err;
+ struct onyx *onyx = i2c_get_clientdata(client);
- if ((err = i2c_detach_client(client)))
- return err;
aoa_codec_unregister(&onyx->codec);
of_node_put(onyx->codec.node);
if (onyx->codec_info)
kfree(onyx->codec_info);
+ i2c_set_clientdata(client, onyx);
kfree(onyx);
return 0;
}
+static const struct i2c_device_id onyx_i2c_id[] = {
+ { "aoa_codec_onyx", 0 },
+ { }
+};
+
static struct i2c_driver onyx_driver = {
.driver = {
.name = "aoa_codec_onyx",
.owner = THIS_MODULE,
},
.attach_adapter = onyx_i2c_attach,
- .detach_client = onyx_i2c_detach,
+ .probe = onyx_i2c_probe,
+ .remove = onyx_i2c_remove,
+ .id_table = onyx_i2c_id,
};
static int __init onyx_init(void)
struct tas {
struct aoa_codec codec;
- struct i2c_client i2c;
+ struct i2c_client *i2c;
u32 mute_l:1, mute_r:1 ,
controls_created:1 ,
drc_enabled:1,
static inline int tas_write_reg(struct tas *tas, u8 reg, u8 len, u8 *data)
{
if (len == 1)
- return i2c_smbus_write_byte_data(&tas->i2c, reg, *data);
+ return i2c_smbus_write_byte_data(tas->i2c, reg, *data);
else
- return i2c_smbus_write_i2c_block_data(&tas->i2c, reg, len, data);
+ return i2c_smbus_write_i2c_block_data(tas->i2c, reg, len, data);
}
static void tas3004_set_drc(struct tas *tas)
}
-static struct i2c_driver tas_driver;
-
static int tas_create(struct i2c_adapter *adapter,
struct device_node *node,
int addr)
{
+ struct i2c_board_info info;
+ struct i2c_client *client;
+
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "aoa_codec_tas", I2C_NAME_SIZE);
+ info.addr = addr;
+ info.platform_data = node;
+
+ client = i2c_new_device(adapter, &info);
+ if (!client)
+ return -ENODEV;
+
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&client->detected, &client->driver->clients);
+ return 0;
+}
+
+static int tas_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device_node *node = client->dev.platform_data;
struct tas *tas;
tas = kzalloc(sizeof(struct tas), GFP_KERNEL);
return -ENOMEM;
mutex_init(&tas->mtx);
- tas->i2c.driver = &tas_driver;
- tas->i2c.adapter = adapter;
- tas->i2c.addr = addr;
+ tas->i2c = client;
+ i2c_set_clientdata(client, tas);
+
/* seems that half is a saner default */
tas->drc_range = TAS3004_DRC_MAX / 2;
- strlcpy(tas->i2c.name, "tas audio codec", I2C_NAME_SIZE);
-
- if (i2c_attach_client(&tas->i2c)) {
- printk(KERN_ERR PFX "failed to attach to i2c\n");
- goto fail;
- }
strlcpy(tas->codec.name, "tas", MAX_CODEC_NAME_LEN);
tas->codec.owner = THIS_MODULE;
tas->codec.node = of_node_get(node);
if (aoa_codec_register(&tas->codec)) {
- goto detach;
+ goto fail;
}
printk(KERN_DEBUG
"snd-aoa-codec-tas: tas found, addr 0x%02x on %s\n",
- addr, node->full_name);
+ (unsigned int)client->addr, node->full_name);
return 0;
- detach:
- i2c_detach_client(&tas->i2c);
fail:
mutex_destroy(&tas->mtx);
kfree(tas);
return -ENODEV;
}
-static int tas_i2c_detach(struct i2c_client *client)
+static int tas_i2c_remove(struct i2c_client *client)
{
- struct tas *tas = container_of(client, struct tas, i2c);
- int err;
+ struct tas *tas = i2c_get_clientdata(client);
u8 tmp = TAS_ACR_ANALOG_PDOWN;
- if ((err = i2c_detach_client(client)))
- return err;
aoa_codec_unregister(&tas->codec);
of_node_put(tas->codec.node);
return 0;
}
+static const struct i2c_device_id tas_i2c_id[] = {
+ { "aoa_codec_tas", 0 },
+ { }
+};
+
static struct i2c_driver tas_driver = {
.driver = {
.name = "aoa_codec_tas",
.owner = THIS_MODULE,
},
.attach_adapter = tas_i2c_attach,
- .detach_client = tas_i2c_detach,
+ .probe = tas_i2c_probe,
+ .remove = tas_i2c_remove,
+ .id_table = tas_i2c_id,
};
static int __init tas_init(void)
switch (resetgpio_action) {
case RESETGPIO_NORMAL_ALTFUNC:
if (reset_gpio == 113)
- mode = 113 | GPIO_OUT | GPIO_DFLT_LOW;
+ mode = 113 | GPIO_ALT_FN_2_OUT;
if (reset_gpio == 95)
mode = 95 | GPIO_ALT_FN_1_OUT;
break;
int __devinit pxa2xx_ac97_hw_probe(struct platform_device *dev)
{
int ret;
- struct pxa2xx_ac97_platform_data *pdata = dev->dev.platform_data;
+ pxa2xx_audio_ops_t *pdata = dev->dev.platform_data;
if (pdata) {
switch (pdata->reset_gpio) {
{
struct snd_ctl_elem_value *control;
int result;
-
- control = kmalloc(sizeof(*control), GFP_KERNEL);
- if (control == NULL)
- return -ENOMEM;
- if (copy_from_user(control, _control, sizeof(*control))) {
- kfree(control);
- return -EFAULT;
- }
+
+ control = memdup_user(_control, sizeof(*control));
+ if (IS_ERR(control))
+ return PTR_ERR(control);
+
snd_power_lock(card);
result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
if (result >= 0)
struct snd_card *card;
int result;
- control = kmalloc(sizeof(*control), GFP_KERNEL);
- if (control == NULL)
- return -ENOMEM;
- if (copy_from_user(control, _control, sizeof(*control))) {
- kfree(control);
- return -EFAULT;
- }
+ control = memdup_user(_control, sizeof(*control));
+ if (IS_ERR(control))
+ return PTR_ERR(control);
+
card = file->card;
snd_power_lock(card);
result = snd_power_wait(card, SNDRV_CTL_POWER_D0);
if (op_flag > 0) {
if (size > 1024 * 128) /* sane value */
return -EINVAL;
- new_data = kmalloc(size, GFP_KERNEL);
- if (new_data == NULL)
- return -ENOMEM;
- if (copy_from_user(new_data, tlv, size)) {
- kfree(new_data);
- return -EFAULT;
- }
+
+ new_data = memdup_user(tlv, size);
+ if (IS_ERR(new_data))
+ return PTR_ERR(new_data);
change = ue->tlv_data_size != size;
if (!change)
change = memcmp(ue->tlv_data, new_data, size);
{
struct snd_jack *jack = device->device_data;
+ if (jack->private_free)
+ jack->private_free(jack);
+
/* If the input device is registered with the input subsystem
* then we need to use a different deallocator. */
if (jack->registered)
if (! (runtime = substream->runtime))
return -ENOTTY;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
- if (data == NULL)
- return -ENOMEM;
/* only fifo_size is different, so just copy all */
- if (copy_from_user(data, data32, sizeof(*data32))) {
- err = -EFAULT;
- goto error;
- }
+ data = memdup_user(data32, sizeof(*data32));
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
if (refine)
err = snd_pcm_hw_refine(substream, data);
else
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_uframes_t pos;
- snd_pcm_uframes_t new_hw_ptr, hw_ptr_interrupt, hw_base;
- snd_pcm_sframes_t delta;
+ snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_ptr_interrupt, hw_base;
+ snd_pcm_sframes_t hdelta, delta;
+ unsigned long jdelta;
+ old_hw_ptr = runtime->status->hw_ptr;
pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
if (pos == SNDRV_PCM_POS_XRUN) {
xrun(substream);
new_hw_ptr = hw_base + pos;
}
}
- if (delta > runtime->period_size) {
+ /* Skip the jiffies check for hardwares with BATCH flag.
+ * Such hardware usually just increases the position at each IRQ,
+ * thus it can't give any strange position.
+ */
+ if (runtime->hw.info & SNDRV_PCM_INFO_BATCH)
+ goto no_jiffies_check;
+ hdelta = new_hw_ptr - old_hw_ptr;
+ jdelta = jiffies - runtime->hw_ptr_jiffies;
+ if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
+ delta = jdelta /
+ (((runtime->period_size * HZ) / runtime->rate)
+ + HZ/100);
+ hw_ptr_error(substream,
+ "hw_ptr skipping! [Q] "
+ "(pos=%ld, delta=%ld, period=%ld, "
+ "jdelta=%lu/%lu/%lu)\n",
+ (long)pos, (long)hdelta,
+ (long)runtime->period_size, jdelta,
+ ((hdelta * HZ) / runtime->rate), delta);
+ hw_ptr_interrupt = runtime->hw_ptr_interrupt +
+ runtime->period_size * delta;
+ if (hw_ptr_interrupt >= runtime->boundary)
+ hw_ptr_interrupt -= runtime->boundary;
+ /* rebase to interrupt position */
+ hw_base = new_hw_ptr = hw_ptr_interrupt;
+ /* align hw_base to buffer_size */
+ hw_base -= hw_base % runtime->buffer_size;
+ delta = 0;
+ }
+ no_jiffies_check:
+ if (delta > runtime->period_size + runtime->period_size / 2) {
hw_ptr_error(substream,
"Lost interrupts? "
"(stream=%i, delta=%ld, intr_ptr=%ld)\n",
runtime->hw_ptr_base = hw_base;
runtime->status->hw_ptr = new_hw_ptr;
+ runtime->hw_ptr_jiffies = jiffies;
runtime->hw_ptr_interrupt = hw_ptr_interrupt;
return snd_pcm_update_hw_ptr_post(substream, runtime);
snd_pcm_uframes_t pos;
snd_pcm_uframes_t old_hw_ptr, new_hw_ptr, hw_base;
snd_pcm_sframes_t delta;
+ unsigned long jdelta;
old_hw_ptr = runtime->status->hw_ptr;
pos = snd_pcm_update_hw_ptr_pos(substream, runtime);
new_hw_ptr = hw_base + pos;
delta = new_hw_ptr - old_hw_ptr;
+ jdelta = jiffies - runtime->hw_ptr_jiffies;
if (delta < 0) {
delta += runtime->buffer_size;
if (delta < 0) {
hw_ptr_error(substream,
"Unexpected hw_pointer value [2] "
- "(stream=%i, pos=%ld, old_ptr=%ld)\n",
+ "(stream=%i, pos=%ld, old_ptr=%ld, jdelta=%li)\n",
substream->stream, (long)pos,
- (long)old_hw_ptr);
+ (long)old_hw_ptr, jdelta);
return 0;
}
hw_base += runtime->buffer_size;
hw_base = 0;
new_hw_ptr = hw_base + pos;
}
- if (delta > runtime->period_size && runtime->periods > 1) {
+ if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
hw_ptr_error(substream,
"hw_ptr skipping! "
- "(pos=%ld, delta=%ld, period=%ld)\n",
+ "(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
(long)pos, (long)delta,
- (long)runtime->period_size);
+ (long)runtime->period_size, jdelta,
+ ((delta * HZ) / runtime->rate));
return 0;
}
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
runtime->hw_ptr_base = hw_base;
runtime->status->hw_ptr = new_hw_ptr;
+ runtime->hw_ptr_jiffies = jiffies;
return snd_pcm_update_hw_ptr_post(substream, runtime);
}
runtime->status->hw_ptr %= runtime->buffer_size;
else
runtime->status->hw_ptr = 0;
+ runtime->hw_ptr_jiffies = jiffies;
snd_pcm_stream_unlock_irqrestore(substream, flags);
return 0;
}
struct snd_pcm_hw_params *params;
int err;
- params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- if (copy_from_user(params, _params, sizeof(*params))) {
- err = -EFAULT;
- goto out;
- }
+ params = memdup_user(_params, sizeof(*params));
+ if (IS_ERR(params))
+ return PTR_ERR(params);
+
err = snd_pcm_hw_refine(substream, params);
if (copy_to_user(_params, params, sizeof(*params))) {
if (!err)
err = -EFAULT;
}
-out:
+
kfree(params);
return err;
}
struct snd_pcm_hw_params *params;
int err;
- params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- if (copy_from_user(params, _params, sizeof(*params))) {
- err = -EFAULT;
- goto out;
- }
+ params = memdup_user(_params, sizeof(*params));
+ if (IS_ERR(params))
+ return PTR_ERR(params);
+
err = snd_pcm_hw_params(substream, params);
if (copy_to_user(_params, params, sizeof(*params))) {
if (!err)
err = -EFAULT;
}
-out:
+
kfree(params);
return err;
}
return -EFAULT;
if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
return -EFAULT;
- bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
- if (bufs == NULL)
- return -ENOMEM;
- if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
- kfree(bufs);
- return -EFAULT;
- }
+
+ bufs = memdup_user(xfern.bufs,
+ sizeof(void *) * runtime->channels);
+ if (IS_ERR(bufs))
+ return PTR_ERR(bufs);
result = snd_pcm_lib_writev(substream, bufs, xfern.frames);
kfree(bufs);
__put_user(result, &_xfern->result);
return -EFAULT;
if (copy_from_user(&xfern, _xfern, sizeof(xfern)))
return -EFAULT;
- bufs = kmalloc(sizeof(void *) * runtime->channels, GFP_KERNEL);
- if (bufs == NULL)
- return -ENOMEM;
- if (copy_from_user(bufs, xfern.bufs, sizeof(void *) * runtime->channels)) {
- kfree(bufs);
- return -EFAULT;
- }
+
+ bufs = memdup_user(xfern.bufs,
+ sizeof(void *) * runtime->channels);
+ if (IS_ERR(bufs))
+ return PTR_ERR(bufs);
result = snd_pcm_lib_readv(substream, bufs, xfern.frames);
kfree(bufs);
__put_user(result, &_xfern->result);
int err;
params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
- if (!oparams) {
- err = -ENOMEM;
- goto out;
- }
+ if (!params)
+ return -ENOMEM;
- if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
- err = -EFAULT;
+ oparams = memdup_user(_oparams, sizeof(*oparams));
+ if (IS_ERR(oparams)) {
+ err = PTR_ERR(oparams);
goto out;
}
snd_pcm_hw_convert_from_old_params(params, oparams);
if (!err)
err = -EFAULT;
}
+
+ kfree(oparams);
out:
kfree(params);
- kfree(oparams);
return err;
}
int err;
params = kmalloc(sizeof(*params), GFP_KERNEL);
- if (!params) {
- err = -ENOMEM;
- goto out;
- }
- oparams = kmalloc(sizeof(*oparams), GFP_KERNEL);
- if (!oparams) {
- err = -ENOMEM;
- goto out;
- }
- if (copy_from_user(oparams, _oparams, sizeof(*oparams))) {
- err = -EFAULT;
+ if (!params)
+ return -ENOMEM;
+
+ oparams = memdup_user(_oparams, sizeof(*oparams));
+ if (IS_ERR(oparams)) {
+ err = PTR_ERR(oparams);
goto out;
}
snd_pcm_hw_convert_from_old_params(params, oparams);
if (!err)
err = -EFAULT;
}
+
+ kfree(oparams);
out:
kfree(params);
- kfree(oparams);
return err;
}
#endif /* CONFIG_SND_SUPPORT_OLD_API */
struct snd_seq_port_info *data;
mm_segment_t fs;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
- if (! data)
- return -ENOMEM;
+ data = memdup_user(data32, sizeof(*data32));
+ if (IS_ERR(data))
+ return PTR_ERR(data);
- if (copy_from_user(data, data32, sizeof(*data32)) ||
- get_user(data->flags, &data32->flags) ||
+ if (get_user(data->flags, &data32->flags) ||
get_user(data->time_queue, &data32->time_queue))
goto error;
data->kernel = NULL;
struct list_head *p;
int err = 0;
- ginfo = kmalloc(sizeof(*ginfo), GFP_KERNEL);
- if (! ginfo)
- return -ENOMEM;
- if (copy_from_user(ginfo, _ginfo, sizeof(*ginfo))) {
- kfree(ginfo);
- return -EFAULT;
- }
+ ginfo = memdup_user(_ginfo, sizeof(*ginfo));
+ if (IS_ERR(ginfo))
+ return PTR_ERR(ginfo);
+
tid = ginfo->tid;
memset(ginfo, 0, sizeof(*ginfo));
ginfo->tid = tid;
uinfo->value.enumerated.items = chip->max_treble + 1;
if (uinfo->value.enumerated.item > chip->max_treble)
uinfo->value.enumerated.item = chip->max_treble;
- sprintf(uinfo->value.enumerated.name, "%d",
+ sprintf(uinfo->value.enumerated.name, "%lu",
PCSP_CALC_RATE(uinfo->value.enumerated.item));
return 0;
}
if (err < 0)
goto _err;
- sprintf(card->longname, "%s at 0x%lx, irq %d speed %d div %d outs %d ins %d adaptor %s droponfull %d",
+ sprintf(card->longname, "%s [%s] at %#lx, irq %d",
card->shortname,
- uart->base,
- uart->irq,
- uart->speed,
- (int)uart->divisor,
- outs[dev],
- ins[dev],
adaptor_names[uart->adaptor],
- uart->drop_on_full);
+ uart->base,
+ uart->irq);
snd_card_set_dev(card, &devptr->dev);
static struct snd_pcm_hardware snd_msnd_playback = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
static struct snd_pcm_hardware snd_msnd_capture = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
static int snd_sb_csp_load_user(struct snd_sb_csp * p, const unsigned char __user *buf, int size, int load_flags)
{
- int err = -ENOMEM;
- unsigned char *kbuf = kmalloc(size, GFP_KERNEL);
- if (kbuf) {
- if (copy_from_user(kbuf, buf, size))
- err = -EFAULT;
- else
- err = snd_sb_csp_load(p, kbuf, size, load_flags);
- kfree(kbuf);
- }
+ int err;
+ unsigned char *kbuf;
+
+ kbuf = memdup_user(buf, size);
+ if (IS_ERR(kbuf))
+ return PTR_ERR(kbuf);
+
+ err = snd_sb_csp_load(p, kbuf, size, load_flags);
+
+ kfree(kbuf);
return err;
}
"> 512 bytes to FX\n");
return -EIO;
}
- page_data = kmalloc(r.data[2] * sizeof(short), GFP_KERNEL);
- if (!page_data)
- return -ENOMEM;
- if (copy_from_user (page_data,
- (unsigned char __user *) r.data[3],
- r.data[2] * sizeof(short))) {
- kfree(page_data);
- return -EFAULT;
- }
+ page_data = memdup_user((unsigned char __user *)
+ r.data[3],
+ r.data[2] * sizeof(short));
+ if (IS_ERR(page_data))
+ return PTR_ERR(page_data);
pd = page_data;
}
break;
case WFCTL_WFCMD:
- wc = kmalloc(sizeof(*wc), GFP_KERNEL);
- if (! wc)
- return -ENOMEM;
- if (copy_from_user (wc, argp, sizeof (*wc)))
- err = -EFAULT;
- else if (wavefront_synth_control (acard, wc) < 0)
+ wc = memdup_user(argp, sizeof(*wc));
+ if (IS_ERR(wc))
+ return PTR_ERR(wc);
+
+ if (wavefront_synth_control (acard, wc) < 0)
err = -EIO;
else if (copy_to_user (argp, wc, sizeof (*wc)))
err = -EFAULT;
}
/* nothing should be in powerdown mode */
snd_ac97_write_cache(ac97, AC97_GENERAL_PURPOSE, 0);
- end_time = jiffies + msecs_to_jiffies(100);
+ end_time = jiffies + msecs_to_jiffies(120);
do {
if ((snd_ac97_read(ac97, AC97_POWERDOWN) & 0x0f) == 0x0f)
goto __ready_ok;
.name = "HP nx6125",
.type = AC97_TUNE_MUTE_LED
},
+ {
+ .subvendor = 0x103c,
+ .subdevice = 0x3091,
+ .name = "unknown HP",
+ .type = AC97_TUNE_MUTE_LED
+ },
{ } /* terminator */
};
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = 0, /* set at runtime */
.channels_min = 2,
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = ANALOG_CLOCK / CLOCK_DIV_MAX,
.dev_free = snd_cmipci_dev_free,
};
unsigned int val;
- long iomidi;
+ long iomidi = 0;
int integrated_midi = 0;
char modelstr[16];
int pcm_index, pcm_spdif_index;
.rates = SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_64000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 32000,
.rates = SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_64000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 32000,
case SNDRV_EMU10K1_IOCTL_CODE_POKE:
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- icode = kmalloc(sizeof(*icode), GFP_KERNEL);
- if (icode == NULL)
- return -ENOMEM;
- if (copy_from_user(icode, argp, sizeof(*icode))) {
- kfree(icode);
- return -EFAULT;
- }
+
+ icode = memdup_user(argp, sizeof(*icode));
+ if (IS_ERR(icode))
+ return PTR_ERR(icode);
res = snd_emu10k1_icode_poke(emu, icode);
kfree(icode);
return res;
case SNDRV_EMU10K1_IOCTL_CODE_PEEK:
- icode = kmalloc(sizeof(*icode), GFP_KERNEL);
- if (icode == NULL)
- return -ENOMEM;
- if (copy_from_user(icode, argp, sizeof(*icode))) {
- kfree(icode);
- return -EFAULT;
- }
+ icode = memdup_user(argp, sizeof(*icode));
+ if (IS_ERR(icode))
+ return PTR_ERR(icode);
res = snd_emu10k1_icode_peek(emu, icode);
if (res == 0 && copy_to_user(argp, icode, sizeof(*icode))) {
kfree(icode);
kfree(icode);
return res;
case SNDRV_EMU10K1_IOCTL_PCM_POKE:
- ipcm = kmalloc(sizeof(*ipcm), GFP_KERNEL);
- if (ipcm == NULL)
- return -ENOMEM;
- if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
- kfree(ipcm);
- return -EFAULT;
- }
+ ipcm = memdup_user(argp, sizeof(*ipcm));
+ if (IS_ERR(ipcm))
+ return PTR_ERR(ipcm);
res = snd_emu10k1_ipcm_poke(emu, ipcm);
kfree(ipcm);
return res;
case SNDRV_EMU10K1_IOCTL_PCM_PEEK:
- ipcm = kzalloc(sizeof(*ipcm), GFP_KERNEL);
- if (ipcm == NULL)
- return -ENOMEM;
- if (copy_from_user(ipcm, argp, sizeof(*ipcm))) {
- kfree(ipcm);
- return -EFAULT;
- }
+ ipcm = memdup_user(argp, sizeof(*ipcm));
+ if (IS_ERR(ipcm))
+ return PTR_ERR(ipcm);
res = snd_emu10k1_ipcm_peek(emu, ipcm);
if (res == 0 && copy_to_user(argp, ipcm, sizeof(*ipcm))) {
kfree(ipcm);
if (newtime != curtime)
break;
}
- if (count >= 16384)
+ if (count > 16384)
break;
curtime = newtime;
}
*/
static void /*__devinit*/ setup_fg_nodes(struct hda_codec *codec)
{
- int i, total_nodes;
+ int i, total_nodes, function_id;
hda_nid_t nid;
total_nodes = snd_hda_get_sub_nodes(codec, AC_NODE_ROOT, &nid);
for (i = 0; i < total_nodes; i++, nid++) {
- codec->function_id = snd_hda_param_read(codec, nid,
+ function_id = snd_hda_param_read(codec, nid,
AC_PAR_FUNCTION_TYPE) & 0xff;
- switch (codec->function_id) {
+ switch (function_id) {
case AC_GRP_AUDIO_FUNCTION:
codec->afg = nid;
+ codec->function_id = function_id;
break;
case AC_GRP_MODEM_FUNCTION:
codec->mfg = nid;
+ codec->function_id = function_id;
break;
default:
break;
err = bus->ops.command(bus, res);
if (!err) {
struct hda_cache_head *c;
- u32 key = build_cmd_cache_key(nid, verb);
+ u32 key;
+ /* parm may contain the verb stuff for get/set amp */
+ verb = verb | (parm >> 8);
+ parm &= 0xff;
+ key = build_cmd_cache_key(nid, verb);
c = get_alloc_hash(&codec->cmd_cache, key);
if (c)
c->val = parm;
unsigned int period_bytes; /* size of the period in bytes */
unsigned int frags; /* number for period in the play buffer */
unsigned int fifo_size; /* FIFO size */
+ unsigned long start_jiffies; /* start + minimum jiffies */
+ unsigned long min_jiffies; /* minimum jiffies before position is valid */
void __iomem *sd_addr; /* stream descriptor pointer */
unsigned int opened :1;
unsigned int running :1;
unsigned int irq_pending :1;
- unsigned int irq_ignore :1;
+ unsigned int start_flag: 1; /* stream full start flag */
/*
* For VIA:
* A flag to ensure DMA position is 0
struct azx *chip = dev_id;
struct azx_dev *azx_dev;
u32 status;
- int i;
+ int i, ok;
spin_lock(&chip->reg_lock);
azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK);
if (!azx_dev->substream || !azx_dev->running)
continue;
- /* ignore the first dummy IRQ (due to pos_adj) */
- if (azx_dev->irq_ignore) {
- azx_dev->irq_ignore = 0;
- continue;
- }
/* check whether this IRQ is really acceptable */
- if (azx_position_ok(chip, azx_dev)) {
+ ok = azx_position_ok(chip, azx_dev);
+ if (ok == 1) {
azx_dev->irq_pending = 0;
spin_unlock(&chip->reg_lock);
snd_pcm_period_elapsed(azx_dev->substream);
spin_lock(&chip->reg_lock);
- } else if (chip->bus && chip->bus->workq) {
+ } else if (ok == 0 && chip->bus && chip->bus->workq) {
/* bogus IRQ, process it later */
azx_dev->irq_pending = 1;
queue_work(chip->bus->workq,
bdl = (u32 *)azx_dev->bdl.area;
ofs = 0;
azx_dev->frags = 0;
- azx_dev->irq_ignore = 0;
pos_adj = bdl_pos_adj[chip->dev_index];
if (pos_adj > 0) {
struct snd_pcm_runtime *runtime = substream->runtime;
&bdl, ofs, pos_adj, 1);
if (ofs < 0)
goto error;
- azx_dev->irq_ignore = 1;
}
} else
pos_adj = 0;
while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) &&
--timeout)
;
+
+ /* reset first position - may not be synced with hw at this time */
+ *azx_dev->posbuf = 0;
}
/*
snd_pcm_set_sync(substream);
mutex_unlock(&chip->open_mutex);
- azx_stream_reset(chip, azx_dev);
return 0;
}
unsigned int bufsize, period_bytes, format_val;
int err;
+ azx_stream_reset(chip, azx_dev);
format_val = snd_hda_calc_stream_format(runtime->rate,
runtime->channels,
runtime->format,
return err;
}
+ azx_dev->min_jiffies = (runtime->period_size * HZ) /
+ (runtime->rate * 2);
azx_setup_controller(chip, azx_dev);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1;
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev;
struct snd_pcm_substream *s;
- int start, nsync = 0, sbits = 0;
+ int rstart = 0, start, nsync = 0, sbits = 0;
int nwait, timeout;
switch (cmd) {
+ case SNDRV_PCM_TRIGGER_START:
+ rstart = 1;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_START:
start = 1;
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
if (s->pcm->card != substream->pcm->card)
continue;
azx_dev = get_azx_dev(s);
+ if (rstart) {
+ azx_dev->start_flag = 1;
+ azx_dev->start_jiffies = jiffies + azx_dev->min_jiffies;
+ }
if (start)
azx_stream_start(chip, azx_dev);
else
{
unsigned int pos;
+ if (azx_dev->start_flag &&
+ time_before_eq(jiffies, azx_dev->start_jiffies))
+ return -1; /* bogus (too early) interrupt */
+ azx_dev->start_flag = 0;
+
pos = azx_get_position(chip, azx_dev);
if (chip->position_fix == POS_FIX_AUTO) {
if (!pos) {
gcap &= ~0x01;
/* allow 64bit DMA address if supported by H/W */
- if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_64BIT_MASK))
- pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK);
+ if ((gcap & 0x01) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
else {
- pci_set_dma_mask(pci, DMA_32BIT_MASK);
- pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK);
+ pci_set_dma_mask(pci, DMA_BIT_MASK(32));
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
}
/* read number of streams from GCAP register instead of using
{ } /* end */
};
+static struct hda_verb ad1884a_mobile_verbs[] = {
+ /* DACs; unmute as default */
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, 0x27}, /* 0dB */
+ /* Port-A (HP) mixer - route only from analog mixer */
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-A pin */
+ {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ /* Port-A (HP) pin - always unmuted */
+ {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Port-B (mic jack) pin */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-C (int mic) pin */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ /* Port-F (int speaker) mixer - route only from analog mixer */
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x0b, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ /* Port-F pin */
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Analog mixer; mute as default */
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
+ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)},
+ /* Analog Mix output amp */
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* capture sources */
+ /* {0x0c, AC_VERB_SET_CONNECT_SEL, 0x0}, */ /* set via unsol */
+ {0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ {0x0d, AC_VERB_SET_CONNECT_SEL, 0x0},
+ {0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* unsolicited event for pin-sense */
+ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
+ { } /* end */
+};
+
/*
* Thinkpad X300
* 0x11 - HP
spec->input_mux = &ad1884a_laptop_capture_source;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
+ /* set the upper-limit for mixer amp to 0dB for avoiding the
+ * possible damage by overloading
+ */
+ snd_hda_override_amp_caps(codec, 0x20, HDA_INPUT,
+ (0x17 << AC_AMPCAP_OFFSET_SHIFT) |
+ (0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
+ (0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
+ (1 << AC_AMPCAP_MUTE_SHIFT));
break;
case AD1884A_MOBILE:
spec->mixers[0] = ad1884a_mobile_mixers;
- spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
+ spec->init_verbs[0] = ad1884a_mobile_verbs;
spec->multiout.dig_out_nid = 0;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
}
#ifdef CONFIG_SND_JACK
+static void conexant_free_jack_priv(struct snd_jack *jack)
+{
+ struct conexant_jack *jacks = jack->private_data;
+ jacks->nid = 0;
+ jacks->jack = NULL;
+}
+
static int conexant_add_jack(struct hda_codec *codec,
hda_nid_t nid, int type)
{
struct conexant_spec *spec;
struct conexant_jack *jack;
const char *name;
+ int err;
spec = codec->spec;
snd_array_init(&spec->jacks, sizeof(*jack), 32);
jack->nid = nid;
jack->type = type;
- return snd_jack_new(codec->bus->card, name, type, &jack->jack);
+ err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+ if (err < 0)
+ return err;
+ jack->jack->private_data = jack;
+ jack->jack->private_free = conexant_free_jack_priv;
+ return 0;
}
static void conexant_report_jack(struct hda_codec *codec, hda_nid_t nid)
if (spec->jacks.list) {
struct conexant_jack *jacks = spec->jacks.list;
int i;
- for (i = 0; i < spec->jacks.used; i++)
- snd_device_free(codec->bus->card, &jacks[i].jack);
+ for (i = 0; i < spec->jacks.used; i++, jacks++) {
+ if (jacks->jack)
+ snd_device_free(codec->bus->card, jacks->jack);
+ }
snd_array_free(&spec->jacks);
}
#endif
ALC663_ASUS_MODE4,
ALC663_ASUS_MODE5,
ALC663_ASUS_MODE6,
+ ALC272_DELL,
+ ALC272_DELL_ZM1,
ALC662_AUTO,
ALC662_MODEL_LAST,
};
SND_PCI_QUIRK_VENDOR(0x1558, "Clevo laptop", ALC883_LAPTOP_EAPD),
SND_PCI_QUIRK(0x15d9, 0x8780, "Supermicro PDSBA", ALC883_3ST_6ch),
SND_PCI_QUIRK(0x161f, 0x2054, "Medion laptop", ALC883_MEDION),
- SND_PCI_QUIRK(0x1734, 0x1107, "FSC AMILO Xi2550",
+ SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1100, "FSC AMILO Xi/Pi25xx",
ALC883_FUJITSU_PI2515),
- SND_PCI_QUIRK(0x1734, 0x1108, "Fujitsu AMILO Pi2515", ALC883_FUJITSU_PI2515),
- SND_PCI_QUIRK(0x1734, 0x113d, "Fujitsu AMILO Xa3530",
+ SND_PCI_QUIRK_MASK(0x1734, 0xfff0, 0x1130, "Fujitsu AMILO Xa35xx",
ALC888_FUJITSU_XA3530),
SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo 101e", ALC883_LENOVO_101E_2ch),
SND_PCI_QUIRK(0x17aa, 0x2085, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x3bf8, "Quanta FL1", ALC269_QUANTA_FL1),
SND_PCI_QUIRK(0x1043, 0x8330, "ASUS Eeepc P703 P900A",
ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1883, "ASUS F81Se", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x16a3, "ASUS F5Q", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1723, "ASUS P80", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1773, "ASUS U20A", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1743, "ASUS U80", ALC269_ASUS_EEEPC_P703),
+ SND_PCI_QUIRK(0x1043, 0x1653, "ASUS U50", ALC269_ASUS_EEEPC_P703),
SND_PCI_QUIRK(0x1043, 0x831a, "ASUS Eeepc P901",
ALC269_ASUS_EEEPC_P901),
SND_PCI_QUIRK(0x1043, 0x834a, "ASUS Eeepc S101",
ALC269_ASUS_EEEPC_P901),
+ SND_PCI_QUIRK(0x1043, 0x16e3, "ASUS UX50", ALC269_ASUS_EEEPC_P901),
SND_PCI_QUIRK(0x1734, 0x115d, "FSC Amilo", ALC269_FUJITSU),
SND_PCI_QUIRK(0x10cf, 0x1475, "Lifebook ICH9M-based", ALC269_LIFEBOOK),
{}
0x02, 0x03, 0x04
};
+static hda_nid_t alc272_dac_nids[2] = {
+ 0x02, 0x03
+};
+
static hda_nid_t alc662_adc_nids[1] = {
/* ADC1-2 */
0x09,
};
+static hda_nid_t alc272_adc_nids[1] = {
+ /* ADC1-2 */
+ 0x08,
+};
+
static hda_nid_t alc662_capsrc_nids[1] = { 0x22 };
+static hda_nid_t alc272_capsrc_nids[1] = { 0x23 };
+
/* input MUX */
/* FIXME: should be a matrix-type input source selection */
/* Mixer elements: 0x18, 19, 1a, 1b, 1c, 1d, 14, 15, 16, 17, 0b */
/* Input mixer */
{0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
-
{0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
- {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(4)},
/* always trun on EAPD */
{0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
{}
};
+static struct hda_verb alc272_dell_zm1_init_verbs[] = {
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {}
+};
+
+static struct hda_verb alc272_dell_init_verbs[] = {
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+ {0x21, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {0x21, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x21, AC_VERB_SET_CONNECT_SEL, 0x01}, /* Headphone */
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
+ {0x23, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(9)},
+ {0x18, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_MIC_EVENT},
+ {0x21, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
+ {}
+};
+
static struct snd_kcontrol_new alc662_auto_capture_mixer[] = {
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0x0, HDA_INPUT),
HDA_CODEC_MUTE("Capture Switch", 0x09, 0x0, HDA_INPUT),
{ } /* end */
};
+static struct snd_kcontrol_new alc272_auto_capture_mixer[] = {
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ { } /* end */
+};
+
static void alc662_lenovo_101e_ispeaker_automute(struct hda_codec *codec)
{
unsigned int present;
static struct snd_pci_quirk alc662_cfg_tbl[] = {
SND_PCI_QUIRK(0x1019, 0x9087, "ECS", ALC662_ECS),
+ SND_PCI_QUIRK(0x1028, 0x02d6, "DELL", ALC272_DELL),
+ SND_PCI_QUIRK(0x1028, 0x02f4, "DELL ZM1", ALC272_DELL_ZM1),
SND_PCI_QUIRK(0x1043, 0x1000, "ASUS N50Vm", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1092, "ASUS NB", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x11c3, "ASUS M70V", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1763, "ASUS NB", ALC663_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1765, "ASUS NB", ALC663_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1783, "ASUS NB", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x17b3, "ASUS F70SL", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x17c3, "ASUS UX20", ALC663_ASUS_M51VA),
+ SND_PCI_QUIRK(0x1043, 0x17f3, "ASUS X58LE", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1813, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1823, "ASUS NB", ALC663_ASUS_MODE5),
SND_PCI_QUIRK(0x1043, 0x1833, "ASUS NB", ALC663_ASUS_MODE6),
SND_PCI_QUIRK(0x1043, 0x1843, "ASUS NB", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1853, "ASUS F50Z", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1864, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1876, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M51VA", ALC663_ASUS_M51VA),
/*SND_PCI_QUIRK(0x1043, 0x1878, "ASUS M50Vr", ALC663_ASUS_MODE1),*/
SND_PCI_QUIRK(0x1043, 0x1893, "ASUS M50Vm", ALC663_ASUS_MODE3),
SND_PCI_QUIRK(0x1043, 0x1894, "ASUS X55", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x18b3, "ASUS N80Vc", ALC663_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18d3, "ASUS N81Te", ALC663_ASUS_MODE1),
+ SND_PCI_QUIRK(0x1043, 0x18f3, "ASUS N505Tp", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1903, "ASUS F5GL", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1913, "ASUS NB", ALC662_ASUS_MODE2),
SND_PCI_QUIRK(0x1043, 0x1933, "ASUS F80Q", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x1943, "ASUS Vx3V", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1953, "ASUS NB", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1963, "ASUS X71C", ALC663_ASUS_MODE3),
+ SND_PCI_QUIRK(0x1043, 0x1983, "ASUS N5051A", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x1993, "ASUS N20", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS G50V", ALC663_ASUS_G50V),
/*SND_PCI_QUIRK(0x1043, 0x19a3, "ASUS NB", ALC663_ASUS_MODE1),*/
SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS F7Z", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19c3, "ASUS F5Z/F6x", ALC662_ASUS_MODE2),
+ SND_PCI_QUIRK(0x1043, 0x19d3, "ASUS NB", ALC663_ASUS_M51VA),
SND_PCI_QUIRK(0x1043, 0x19e3, "ASUS NB", ALC663_ASUS_MODE1),
SND_PCI_QUIRK(0x1043, 0x19f3, "ASUS NB", ALC663_ASUS_MODE4),
SND_PCI_QUIRK(0x1043, 0x8290, "ASUS P5GC-MX", ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1458, 0xa002, "Gigabyte 945GCM-S2L",
ALC662_3ST_6ch_DIG),
SND_PCI_QUIRK(0x1565, 0x820f, "Biostar TA780G M2+", ALC662_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x1631, 0xc10c, "PB RS65", ALC663_ASUS_M51VA),
SND_PCI_QUIRK(0x17aa, 0x101e, "Lenovo", ALC662_LENOVO_101E),
SND_PCI_QUIRK(0x1849, 0x3662, "ASROCK K10N78FullHD-hSLI R3.0",
ALC662_3ST_6ch_DIG),
.unsol_event = alc663_mode6_unsol_event,
.init_hook = alc663_mode6_inithook,
},
+ [ALC272_DELL] = {
+ .mixers = { alc663_m51va_mixer },
+ .cap_mixer = alc272_auto_capture_mixer,
+ .init_verbs = { alc662_init_verbs, alc272_dell_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc272_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+ .adc_nids = alc272_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc272_adc_nids),
+ .capsrc_nids = alc272_capsrc_nids,
+ .channel_mode = alc662_3ST_2ch_modes,
+ .input_mux = &alc663_m51va_capture_source,
+ .unsol_event = alc663_m51va_unsol_event,
+ .init_hook = alc663_m51va_inithook,
+ },
+ [ALC272_DELL_ZM1] = {
+ .mixers = { alc663_m51va_mixer },
+ .cap_mixer = alc662_auto_capture_mixer,
+ .init_verbs = { alc662_init_verbs, alc272_dell_zm1_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc272_dac_nids),
+ .dac_nids = alc662_dac_nids,
+ .num_channel_mode = ARRAY_SIZE(alc662_3ST_2ch_modes),
+ .adc_nids = alc662_adc_nids,
+ .num_adc_nids = ARRAY_SIZE(alc662_adc_nids),
+ .capsrc_nids = alc662_capsrc_nids,
+ .channel_mode = alc662_3ST_2ch_modes,
+ .input_mux = &alc663_m51va_capture_source,
+ .unsol_event = alc663_m51va_unsol_event,
+ .init_hook = alc663_m51va_inithook,
+ },
};
unsigned int wid_caps;
for (i = 0; i < num_outs && i < ARRAY_SIZE(chname); i++) {
+ if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
+ wid_caps = get_wcaps(codec, pins[i]);
+ if (wid_caps & AC_WCAP_UNSOL_CAP)
+ spec->hp_detect = 1;
+ }
nid = dac_nids[i];
if (!nid)
continue;
err = create_controls_idx(codec, name, idx, nid, 3);
if (err < 0)
return err;
- if (type == AUTO_PIN_HP_OUT && !spec->hp_detect) {
- wid_caps = get_wcaps(codec, pins[i]);
- if (wid_caps & AC_WCAP_UNSOL_CAP)
- spec->hp_detect = 1;
- }
}
}
return 0;
AC_VERB_SET_GPIO_DATA, gpiostate); /* sync */
}
+#ifdef CONFIG_SND_JACK
+static void stac92xx_free_jack_priv(struct snd_jack *jack)
+{
+ struct sigmatel_jack *jacks = jack->private_data;
+ jacks->nid = 0;
+ jacks->jack = NULL;
+}
+#endif
+
static int stac92xx_add_jack(struct hda_codec *codec,
hda_nid_t nid, int type)
{
int def_conf = snd_hda_codec_get_pincfg(codec, nid);
int connectivity = get_defcfg_connect(def_conf);
char name[32];
+ int err;
if (connectivity && connectivity != AC_JACK_PORT_FIXED)
return 0;
snd_hda_get_jack_connectivity(def_conf),
snd_hda_get_jack_location(def_conf));
- return snd_jack_new(codec->bus->card, name, type, &jack->jack);
-#else
- return 0;
+ err = snd_jack_new(codec->bus->card, name, type, &jack->jack);
+ if (err < 0) {
+ jack->nid = 0;
+ return err;
+ }
+ jack->jack->private_data = jack;
+ jack->jack->private_free = stac92xx_free_jack_priv;
#endif
+ return 0;
}
static int stac_add_event(struct sigmatel_spec *spec, hda_nid_t nid,
pinctl = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
/* if PINCTL already set then skip */
- if (!(pinctl & AC_PINCTL_IN_EN)) {
+ /* Also, if both INPUT and OUTPUT are set,
+ * it must be a BIOS bug; need to override, too
+ */
+ if (!(pinctl & AC_PINCTL_IN_EN) ||
+ (pinctl & AC_PINCTL_OUT_EN)) {
+ pinctl &= ~AC_PINCTL_OUT_EN;
pinctl |= AC_PINCTL_IN_EN;
stac92xx_auto_set_pinctl(codec, nid,
pinctl);
if (!codec->bus->shutdown && spec->jacks.list) {
struct sigmatel_jack *jacks = spec->jacks.list;
int i;
- for (i = 0; i < spec->jacks.used; i++)
- snd_device_free(codec->bus->card, &jacks[i].jack);
+ for (i = 0; i < spec->jacks.used; i++, jacks++) {
+ if (jacks->jack)
+ snd_device_free(codec->bus->card, jacks->jack);
+ }
}
snd_array_free(&spec->jacks);
#endif
unsigned int fragsize1;
unsigned int position;
unsigned int pos_shift;
+ unsigned int last_pos;
+ unsigned long last_pos_jiffies;
+ unsigned int jiffy_to_bytes;
int frags;
int lvi;
int lvi_frag;
ichdev->suspended = 0;
/* fallthru */
case SNDRV_PCM_TRIGGER_START:
+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
val = ICH_IOCE | ICH_STARTBM;
+ ichdev->last_pos = ichdev->position;
+ ichdev->last_pos_jiffies = jiffies;
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
ichdev->suspended = 1;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
val = ICH_IOCE;
break;
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- val = ICH_IOCE | ICH_STARTBM;
- break;
default:
return -EINVAL;
}
ichdev->pos_shift = (runtime->sample_bits > 16) ? 2 : 1;
}
snd_intel8x0_setup_periods(chip, ichdev);
+ ichdev->jiffy_to_bytes = (runtime->rate * 4 * ichdev->pos_shift) / HZ;
return 0;
}
struct intel8x0 *chip = snd_pcm_substream_chip(substream);
struct ichdev *ichdev = get_ichdev(substream);
size_t ptr1, ptr;
- int civ, timeout = 100;
+ int civ, timeout = 10;
unsigned int position;
spin_lock(&chip->reg_lock);
ptr1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
break;
} while (timeout--);
- ptr1 <<= ichdev->pos_shift;
- ptr = ichdev->fragsize1 - ptr1;
- ptr += position;
+ if (ptr1 != 0) {
+ ptr1 <<= ichdev->pos_shift;
+ ptr = ichdev->fragsize1 - ptr1;
+ ptr += position;
+ ichdev->last_pos = ptr;
+ ichdev->last_pos_jiffies = jiffies;
+ } else {
+ ptr1 = jiffies - ichdev->last_pos_jiffies;
+ if (ptr1)
+ ptr1 -= 1;
+ ptr = ichdev->last_pos + ptr1 * ichdev->jiffy_to_bytes;
+ ptr %= ichdev->size;
+ }
spin_unlock(&chip->reg_lock);
if (ptr >= ichdev->size)
return 0;
.name = "Dell Unknown", /* STAC9750/51 */
.type = AC97_TUNE_HP_ONLY
},
+ {
+ .subvendor = 0x1028,
+ .subdevice = 0x016a,
+ .name = "Dell Inspiron 8600", /* STAC9750/51 */
+ .type = AC97_TUNE_HP_ONLY
+ },
{
.subvendor = 0x1028,
.subdevice = 0x0186,
.name = "HP nc6000",
.type = AC97_TUNE_MUTE_LED
},
- {
- .subvendor = 0x103c,
- .subdevice = 0x0934,
- .name = "HP nx8220",
- .type = AC97_TUNE_MUTE_LED
- },
{
.subvendor = 0x103c,
.subdevice = 0x129d,
struct snd_pcm_substream *subs;
struct ichdev *ichdev;
unsigned long port;
- unsigned long pos, t;
- struct timeval start_time, stop_time;
+ unsigned long pos, pos1, t;
+ int civ, timeout = 1000, attempt = 1;
+ struct timespec start_time, stop_time;
if (chip->ac97_bus->clock != 48000)
return; /* specified in module option */
+ __again:
subs = chip->pcm[0]->streams[0].substream;
if (! subs || subs->dma_buffer.bytes < INTEL8X0_TESTBUF_SIZE) {
snd_printk(KERN_WARNING "no playback buffer allocated - aborting measure ac97 clock\n");
}
ichdev = &chip->ichd[ICHD_PCMOUT];
ichdev->physbuf = subs->dma_buffer.addr;
- ichdev->size = chip->ichd[ICHD_PCMOUT].fragsize = INTEL8X0_TESTBUF_SIZE;
+ ichdev->size = ichdev->fragsize = INTEL8X0_TESTBUF_SIZE;
ichdev->substream = NULL; /* don't process interrupts */
/* set rate */
iputbyte(chip, port + ICH_REG_OFF_CR, ICH_IOCE);
iputdword(chip, ICHREG(ALI_DMACR), 1 << ichdev->ali_slot);
}
- do_gettimeofday(&start_time);
+ do_posix_clock_monotonic_gettime(&start_time);
spin_unlock_irq(&chip->reg_lock);
msleep(50);
spin_lock_irq(&chip->reg_lock);
/* check the position */
- pos = ichdev->fragsize1;
- pos -= igetword(chip, ichdev->reg_offset + ichdev->roff_picb) << ichdev->pos_shift;
- pos += ichdev->position;
+ do {
+ civ = igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV);
+ pos1 = igetword(chip, ichdev->reg_offset + ichdev->roff_picb);
+ if (pos1 == 0) {
+ udelay(10);
+ continue;
+ }
+ if (civ == igetbyte(chip, ichdev->reg_offset + ICH_REG_OFF_CIV) &&
+ pos1 == igetword(chip, ichdev->reg_offset + ichdev->roff_picb))
+ break;
+ } while (timeout--);
+ if (pos1 == 0) { /* oops, this value is not reliable */
+ pos = 0;
+ } else {
+ pos = ichdev->fragsize1;
+ pos -= pos1 << ichdev->pos_shift;
+ pos += ichdev->position;
+ }
chip->in_measurement = 0;
- do_gettimeofday(&stop_time);
+ do_posix_clock_monotonic_gettime(&stop_time);
/* stop */
if (chip->device_type == DEVICE_ALI) {
iputdword(chip, ICHREG(ALI_DMACR), 1 << (ichdev->ali_slot + 16));
iputbyte(chip, port + ICH_REG_OFF_CR, ICH_RESETREGS);
spin_unlock_irq(&chip->reg_lock);
+ if (pos == 0) {
+ snd_printk(KERN_ERR "intel8x0: measure - unreliable DMA position..\n");
+ __retry:
+ if (attempt < 3) {
+ msleep(300);
+ attempt++;
+ goto __again;
+ }
+ goto __end;
+ }
+
+ pos /= 4;
t = stop_time.tv_sec - start_time.tv_sec;
t *= 1000000;
- t += stop_time.tv_usec - start_time.tv_usec;
- printk(KERN_INFO "%s: measured %lu usecs\n", __func__, t);
+ t += (stop_time.tv_nsec - start_time.tv_nsec) / 1000;
+ printk(KERN_INFO "%s: measured %lu usecs (%lu samples)\n", __func__, t, pos);
if (t == 0) {
- snd_printk(KERN_ERR "?? calculation error..\n");
- return;
+ snd_printk(KERN_ERR "intel8x0: ?? calculation error..\n");
+ goto __retry;
}
- pos = (pos / 4) * 1000;
+ pos *= 1000;
pos = (pos / t) * 1000 + ((pos % t) * 1000) / t;
- if (pos < 40000 || pos >= 60000)
+ if (pos < 40000 || pos >= 60000) {
/* abnormal value. hw problem? */
printk(KERN_INFO "intel8x0: measured clock %ld rejected\n", pos);
+ goto __retry;
+ } else if (pos > 40500 && pos < 41500)
+ /* first exception - 41000Hz reference clock */
+ chip->ac97_bus->clock = 41000;
+ else if (pos > 43600 && pos < 44600)
+ /* second exception - 44100HZ reference clock */
+ chip->ac97_bus->clock = 44100;
else if (pos < 47500 || pos > 48500)
/* not 48000Hz, tuning the clock.. */
chip->ac97_bus->clock = (chip->ac97_bus->clock * 48000) / pos;
+ __end:
printk(KERN_INFO "intel8x0: clocking to %d\n", chip->ac97_bus->clock);
snd_ac97_update_power(chip->ac97[0], AC97_PCM_FRONT_DAC_RATE, 0);
}
{
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
{
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
spin_lock_irqsave(&cif->lock, irqflags);
while (i++ < CMDIF_TIMEOUT && !IS_READY(cif->hwport))
udelay(10);
- if (i >= CMDIF_TIMEOUT) {
+ if (i > CMDIF_TIMEOUT) {
err = -EBUSY;
goto errout;
}
WRITE_PORT_ULONG(cmdport->data1, cmd); /* write cmd */
if ((flags & RESP) && ret) {
while (!IS_DATF(cmdport) &&
- time++ < CMDIF_TIMEOUT)
+ time < CMDIF_TIMEOUT) {
udelay(10);
+ time++;
+ }
if (time < CMDIF_TIMEOUT) { /* read response */
ret->retlongs[0] =
READ_PORT_ULONG(cmdport->data1);
SEND_GPOS(cif, 0, data->id, &rptr);
udelay(1);
} while (i != rptr.retlongs[1] && j++ < MAX_WRITE_RETRY);
- if (j >= MAX_WRITE_RETRY)
+ if (j > MAX_WRITE_RETRY)
snd_printk(KERN_ERR "Riptide: Could not stop stream!");
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
SEND_SACR(cif, val, reg);
SEND_RACR(cif, reg, &rptr);
} while (rptr.retwords[1] != val && i++ < MAX_WRITE_RETRY);
- if (i == MAX_WRITE_RETRY)
+ if (i > MAX_WRITE_RETRY)
snd_printdd("Write AC97 reg failed\n");
}
return change;
}
-static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -9450, 150, 1);
+static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -4650, 150, 1);
static struct snd_kcontrol_new snd_via8233_pcmdxs_volume_control __devinitdata = {
.name = "PCM Playback Volume",
static struct snd_pcm_hardware pdacf_pcm_capture_hw = {
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE,
static struct pmac_keywest *keywest_ctx;
-static int keywest_attach_adapter(struct i2c_adapter *adapter);
-static int keywest_detach_client(struct i2c_client *client);
-
-struct i2c_driver keywest_driver = {
- .driver = {
- .name = "PMac Keywest Audio",
- },
- .attach_adapter = &keywest_attach_adapter,
- .detach_client = &keywest_detach_client,
-};
-
-
#ifndef i2c_device_name
#define i2c_device_name(x) ((x)->name)
#endif
+static int keywest_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ i2c_set_clientdata(client, keywest_ctx);
+ return 0;
+}
+
+/*
+ * This is kind of a hack, best would be to turn powermac to fixed i2c
+ * bus numbers and declare the sound device as part of platform
+ * initialization
+ */
static int keywest_attach_adapter(struct i2c_adapter *adapter)
{
- int err;
- struct i2c_client *new_client;
+ struct i2c_board_info info;
if (! keywest_ctx)
return -EINVAL;
if (strncmp(i2c_device_name(adapter), "mac-io", 6))
return 0; /* ignored */
- new_client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
- if (! new_client)
- return -ENOMEM;
-
- new_client->addr = keywest_ctx->addr;
- i2c_set_clientdata(new_client, keywest_ctx);
- new_client->adapter = adapter;
- new_client->driver = &keywest_driver;
- new_client->flags = 0;
-
- strcpy(i2c_device_name(new_client), keywest_ctx->name);
- keywest_ctx->client = new_client;
+ memset(&info, 0, sizeof(struct i2c_board_info));
+ strlcpy(info.type, "keywest", I2C_NAME_SIZE);
+ info.addr = keywest_ctx->addr;
+ keywest_ctx->client = i2c_new_device(adapter, &info);
- /* Tell the i2c layer a new client has arrived */
- if (i2c_attach_client(new_client)) {
- snd_printk(KERN_ERR "tumbler: cannot attach i2c client\n");
- err = -ENODEV;
- goto __err;
- }
-
+ /*
+ * Let i2c-core delete that device on driver removal.
+ * This is safe because i2c-core holds the core_lock mutex for us.
+ */
+ list_add_tail(&keywest_ctx->client->detected,
+ &keywest_ctx->client->driver->clients);
return 0;
-
- __err:
- kfree(new_client);
- keywest_ctx->client = NULL;
- return err;
}
-static int keywest_detach_client(struct i2c_client *client)
+static int keywest_remove(struct i2c_client *client)
{
+ i2c_set_clientdata(client, NULL);
if (! keywest_ctx)
return 0;
if (client == keywest_ctx->client)
keywest_ctx->client = NULL;
- i2c_detach_client(client);
- kfree(client);
return 0;
}
+
+static const struct i2c_device_id keywest_i2c_id[] = {
+ { "keywest", 0 },
+ { }
+};
+
+struct i2c_driver keywest_driver = {
+ .driver = {
+ .name = "PMac Keywest Audio",
+ },
+ .attach_adapter = keywest_attach_adapter,
+ .probe = keywest_probe,
+ .remove = keywest_remove,
+ .id_table = keywest_i2c_id,
+};
+
/* exported */
void snd_pmac_keywest_cleanup(struct pmac_keywest *i2c)
{
/* PCM hardware DMA capabilities - platform specific */
static const struct snd_pcm_hardware au1xpsc_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED,
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH,
.formats = AU1XPSC_PCM_FMTS,
.period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES,
.period_bytes_max = 4096 * 1024 - 1,
obj-$(CONFIG_SND_SOC_WM8903) += snd-soc-wm8903.o
obj-$(CONFIG_SND_SOC_WM8971) += snd-soc-wm8971.o
obj-$(CONFIG_SND_SOC_WM8990) += snd-soc-wm8990.o
-obj-$(CONFIG_SND_SOC_WM8991) += snd-soc-wm8991.o
obj-$(CONFIG_SND_SOC_WM9705) += snd-soc-wm9705.o
obj-$(CONFIG_SND_SOC_WM9712) += snd-soc-wm9712.o
obj-$(CONFIG_SND_SOC_WM9713) += snd-soc-wm9713.o
*/
static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1);
+/*
+ * Gain control for earpiece amplifier
+ * 0 dB to 12 dB in 6 dB steps (mute instead of -6)
+ */
+static DECLARE_TLV_DB_SCALE(output_ear_tvl, -600, 600, 1);
+
/*
* Capture gain after the ADCs
* from 0 dB to 31 dB in 1 dB steps
4, 3, 0, output_tvl),
SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume",
- TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl),
+ TWL4030_REG_EAR_CTL, 4, 3, 0, output_ear_tvl),
/* Common capture gain controls */
SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume",
* required for LRC in master mode. The DACs or ADCs need a
* valid audio path i.e. pin -> ADC or DAC -> pin before
* the LRC will be enabled in master mode. */
- if (!master && cmd != SNDRV_PCM_TRIGGER_START)
+ if (!master || cmd != SNDRV_PCM_TRIGGER_START)
return 0;
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
static int wm8580_out_vu(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
- int reg = kcontrol->private_value & 0xff;
- int reg2 = (kcontrol->private_value >> 24) & 0xff;
+ unsigned int reg = mc->reg;
+ unsigned int reg2 = mc->rreg;
int ret;
u16 val;
return 0;
}
-#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, shift, max, invert, tlv_array) \
+#define SOC_WM8580_OUT_DOUBLE_R_TLV(xname, reg_left, reg_right, xshift, xmax, \
+ xinvert, tlv_array) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = (xname), \
.access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |\
SNDRV_CTL_ELEM_ACCESS_READWRITE, \
.tlv.p = (tlv_array), \
.info = snd_soc_info_volsw_2r, \
.get = snd_soc_get_volsw_2r, .put = wm8580_out_vu, \
- .private_value = (reg_left) | ((shift) << 8) | \
- ((max) << 12) | ((invert) << 20) | ((reg_right) << 24) }
+ .private_value = (unsigned long)&(struct soc_mixer_control) \
+ {.reg = reg_left, .rreg = reg_right, .shift = xshift, \
+ .max = xmax, .invert = xinvert} }
static const struct snd_kcontrol_new wm8580_snd_controls[] = {
SOC_WM8580_OUT_DOUBLE_R_TLV("DAC1 Playback Volume",
reg = wm8580_read(codec, WM8580_PLLA4 + offset);
reg &= ~0x3f;
reg |= pll_div.prescale | pll_div.postscale << 1 |
- pll_div.freqmode << 4;
+ pll_div.freqmode << 3;
wm8580_write(codec, WM8580_PLLA4 + offset, reg);
inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
/* AINLMUX */
-SND_SOC_DAPM_MUX_E("AILNMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINLMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
&wm8990_dapm_ainlmux_controls, inmixer_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
/* AINRMUX */
-SND_SOC_DAPM_MUX_E("AIRNMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINRMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
&wm8990_dapm_ainrmux_controls, inmixer_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
{"LIN12 PGA", "LIN2 Switch", "LIN2"},
/* LIN34 PGA */
{"LIN34 PGA", "LIN3 Switch", "LIN3"},
- {"LIN34 PGA", "LIN4 Switch", "LIN4"},
+ {"LIN34 PGA", "LIN4 Switch", "LIN4/RXN"},
/* INMIXL */
{"INMIXL", "Record Left Volume", "LOMIX"},
{"INMIXL", "LIN2 Volume", "LIN2"},
{"INMIXL", "LINPGA12 Switch", "LIN12 PGA"},
{"INMIXL", "LINPGA34 Switch", "LIN34 PGA"},
- /* AILNMUX */
- {"AILNMUX", "INMIXL Mix", "INMIXL"},
- {"AILNMUX", "DIFFINL Mix", "LIN12PGA"},
- {"AILNMUX", "DIFFINL Mix", "LIN34PGA"},
- {"AILNMUX", "RXVOICE Mix", "LIN4/RXN"},
- {"AILNMUX", "RXVOICE Mix", "RIN4/RXP"},
+ /* AINLMUX */
+ {"AINLMUX", "INMIXL Mix", "INMIXL"},
+ {"AINLMUX", "DIFFINL Mix", "LIN12 PGA"},
+ {"AINLMUX", "DIFFINL Mix", "LIN34 PGA"},
+ {"AINLMUX", "RXVOICE Mix", "LIN4/RXN"},
+ {"AINLMUX", "RXVOICE Mix", "RIN4/RXP"},
/* ADC */
- {"Left ADC", NULL, "AILNMUX"},
+ {"Left ADC", NULL, "AINLMUX"},
/* RIN12 PGA */
{"RIN12 PGA", "RIN1 Switch", "RIN1"},
{"RIN12 PGA", "RIN2 Switch", "RIN2"},
/* RIN34 PGA */
{"RIN34 PGA", "RIN3 Switch", "RIN3"},
- {"RIN34 PGA", "RIN4 Switch", "RIN4"},
+ {"RIN34 PGA", "RIN4 Switch", "RIN4/RXP"},
/* INMIXL */
{"INMIXR", "Record Right Volume", "ROMIX"},
{"INMIXR", "RIN2 Volume", "RIN2"},
{"INMIXR", "RINPGA12 Switch", "RIN12 PGA"},
{"INMIXR", "RINPGA34 Switch", "RIN34 PGA"},
- /* AIRNMUX */
- {"AIRNMUX", "INMIXR Mix", "INMIXR"},
- {"AIRNMUX", "DIFFINR Mix", "RIN12PGA"},
- {"AIRNMUX", "DIFFINR Mix", "RIN34PGA"},
- {"AIRNMUX", "RXVOICE Mix", "RIN4/RXN"},
- {"AIRNMUX", "RXVOICE Mix", "RIN4/RXP"},
+ /* AINRMUX */
+ {"AINRMUX", "INMIXR Mix", "INMIXR"},
+ {"AINRMUX", "DIFFINR Mix", "RIN12 PGA"},
+ {"AINRMUX", "DIFFINR Mix", "RIN34 PGA"},
+ {"AINRMUX", "RXVOICE Mix", "LIN4/RXN"},
+ {"AINRMUX", "RXVOICE Mix", "RIN4/RXP"},
/* ADC */
- {"Right ADC", NULL, "AIRNMUX"},
+ {"Right ADC", NULL, "AINRMUX"},
/* LOMIX */
{"LOMIX", "LOMIX RIN3 Bypass Switch", "RIN3"},
{"LOPMIX", "LOPMIX Left Mixer PGA Switch", "LOPGA"},
/* OUT3MIX */
- {"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXP"},
+ {"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXN"},
{"OUT3MIX", "OUT3MIX Left Out PGA Switch", "LOPGA"},
/* OUT4MIX */
/* Output Pins */
{"LON", NULL, "LONMIX"},
{"LOP", NULL, "LOPMIX"},
- {"OUT", NULL, "OUT3MIX"},
+ {"OUT3", NULL, "OUT3MIX"},
{"LOUT", NULL, "LOUT PGA"},
{"SPKN", NULL, "SPKMIX"},
{"ROUT", NULL, "ROUT PGA"},
}
#ifdef CONFIG_PM
-static int wm9705_soc_suspend(struct platform_device *pdev)
+static int wm9705_soc_suspend(struct platform_device *pdev, pm_message_t msg)
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_codec *codec = socdev->card->codec;
tristate
config SND_DAVINCI_SOC_EVM
- tristate "SoC Audio support for DaVinci EVM"
- depends on SND_DAVINCI_SOC && MACH_DAVINCI_EVM
+ tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM"
+ depends on SND_DAVINCI_SOC
+ depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM
select SND_DAVINCI_SOC_I2S
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on TI
- DaVinci EVM platform.
+ DaVinci DM6446 or DM355 EVM platforms.
config SND_DAVINCI_SOC_SFFSDR
tristate "SoC Audio support for SFFSDR"
#include <sound/soc-dapm.h>
#include <asm/dma.h>
-#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/asp.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
#include "../codecs/tlv320aic3x.h"
#include "davinci-pcm.h"
/* evm audio private data */
static struct aic3x_setup_data evm_aic3x_setup = {
- .i2c_bus = 0,
+ .i2c_bus = 1,
.i2c_address = 0x1b,
};
.codec_data = &evm_aic3x_setup,
};
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
static struct resource evm_snd_resources[] = {
{
- .start = DAVINCI_MCBSP_BASE,
- .end = DAVINCI_MCBSP_BASE + SZ_8K - 1,
+ .start = DAVINCI_ASP0_BASE,
+ .end = DAVINCI_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct evm_snd_platform_data evm_snd_data = {
- .tx_dma_ch = DM644X_DMACH_MCBSP_TX,
- .rx_dma_ch = DM644X_DMACH_MCBSP_RX,
+ .tx_dma_ch = DAVINCI_DMA_ASP0_TX,
+ .rx_dma_ch = DAVINCI_DMA_ASP0_RX,
+};
+
+/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+static struct resource dm335evm_snd_resources[] = {
+ {
+ .start = DAVINCI_ASP1_BASE,
+ .end = DAVINCI_ASP1_BASE + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct evm_snd_platform_data dm335evm_snd_data = {
+ .tx_dma_ch = DAVINCI_DMA_ASP1_TX,
+ .rx_dma_ch = DAVINCI_DMA_ASP1_RX,
};
static struct platform_device *evm_snd_device;
static int __init evm_init(void)
{
+ struct resource *resources;
+ unsigned num_resources;
+ struct evm_snd_platform_data *data;
+ int index;
int ret;
- evm_snd_device = platform_device_alloc("soc-audio", 0);
+ if (machine_is_davinci_evm()) {
+ davinci_cfg_reg(DM644X_MCBSP);
+
+ resources = evm_snd_resources;
+ num_resources = ARRAY_SIZE(evm_snd_resources);
+ data = &evm_snd_data;
+ index = 0;
+ } else if (machine_is_davinci_dm355_evm()) {
+ /* we don't use ASP1 IRQs, or we'd need to mux them ... */
+ davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+ davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+ resources = dm335evm_snd_resources;
+ num_resources = ARRAY_SIZE(dm335evm_snd_resources);
+ data = &dm335evm_snd_data;
+ index = 1;
+ } else
+ return -EINVAL;
+
+ evm_snd_device = platform_device_alloc("soc-audio", index);
if (!evm_snd_device)
return -ENOMEM;
platform_set_drvdata(evm_snd_device, &evm_snd_devdata);
evm_snd_devdata.dev = &evm_snd_device->dev;
- platform_device_add_data(evm_snd_device, &evm_snd_data,
- sizeof(evm_snd_data));
+ platform_device_add_data(evm_snd_device, data, sizeof(*data));
- ret = platform_device_add_resources(evm_snd_device, evm_snd_resources,
- ARRAY_SIZE(evm_snd_resources));
+ ret = platform_device_add_resources(evm_snd_device, resources,
+ num_resources);
if (ret) {
platform_device_put(evm_snd_device);
return ret;
#include "davinci-pcm.h"
+
+/*
+ * NOTE: terminology here is confusing.
+ *
+ * - This driver supports the "Audio Serial Port" (ASP),
+ * found on dm6446, dm355, and other DaVinci chips.
+ *
+ * - But it labels it a "Multi-channel Buffered Serial Port"
+ * (McBSP) as on older chips like the dm642 ... which was
+ * backward-compatible, possibly explaining that confusion.
+ *
+ * - OMAP chips have a controller called McBSP, which is
+ * incompatible with the DaVinci flavor of McBSP.
+ *
+ * - Newer DaVinci chips have a controller called McASP,
+ * incompatible with ASP and with either McBSP.
+ *
+ * In short: this uses ASP to implement I2S, not McBSP.
+ * And it won't be the only DaVinci implemention of I2S.
+ */
#define DAVINCI_MCBSP_DRR_REG 0x00
#define DAVINCI_MCBSP_DXR_REG 0x04
#define DAVINCI_MCBSP_SPCR_REG 0x08
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+ struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
struct davinci_mcbsp_dev *dev;
struct resource *mem, *ioarea;
struct evm_snd_platform_data *pdata;
cpu_dai->private_data = dev;
- dev->clk = clk_get(&pdev->dev, "McBSPCLK");
+ dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
ret = -ENODEV;
goto err_free_mem;
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+ struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
struct resource *mem;
#include <sound/soc.h>
#include <asm/dma.h>
+#include <mach/edma.h>
#include "davinci-pcm.h"
spinlock_t lock;
int period; /* current DMA period */
int master_lch; /* Master DMA channel */
- int slave_lch; /* Slave DMA channel */
+ int slave_lch; /* linked parameter RAM reload slot */
struct davinci_pcm_dma_params *params; /* DMA params */
};
dst_bidx = data_type;
}
- davinci_set_dma_src_params(lch, src, INCR, W8BIT);
- davinci_set_dma_dest_params(lch, dst, INCR, W8BIT);
- davinci_set_dma_src_index(lch, src_bidx, 0);
- davinci_set_dma_dest_index(lch, dst_bidx, 0);
- davinci_set_dma_transfer_params(lch, data_type, count, 1, 0, ASYNC);
+ edma_set_src(lch, src, INCR, W8BIT);
+ edma_set_dest(lch, dst, INCR, W8BIT);
+ edma_set_src_index(lch, src_bidx, 0);
+ edma_set_dest_index(lch, dst_bidx, 0);
+ edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC);
prtd->period++;
if (unlikely(prtd->period >= runtime->periods))
prtd->period = 0;
}
-static void davinci_pcm_dma_irq(int lch, u16 ch_status, void *data)
+static void davinci_pcm_dma_irq(unsigned lch, u16 ch_status, void *data)
{
struct snd_pcm_substream *substream = data;
struct davinci_runtime_data *prtd = substream->runtime->private_data;
struct davinci_runtime_data *prtd = substream->runtime->private_data;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
- int tcc = TCC_ANY;
+ struct edmacc_param p_ram;
int ret;
if (!dma_data)
prtd->params = dma_data;
/* Request master DMA channel */
- ret = davinci_request_dma(prtd->params->channel, prtd->params->name,
+ ret = edma_alloc_channel(prtd->params->channel,
davinci_pcm_dma_irq, substream,
- &prtd->master_lch, &tcc, EVENTQ_0);
- if (ret)
+ EVENTQ_0);
+ if (ret < 0)
return ret;
+ prtd->master_lch = ret;
- /* Request slave DMA channel */
- ret = davinci_request_dma(PARAM_ANY, "Link",
- NULL, NULL, &prtd->slave_lch, &tcc, EVENTQ_0);
- if (ret) {
- davinci_free_dma(prtd->master_lch);
+ /* Request parameter RAM reload slot */
+ ret = edma_alloc_slot(EDMA_SLOT_ANY);
+ if (ret < 0) {
+ edma_free_channel(prtd->master_lch);
return ret;
}
-
- /* Link slave DMA channel in loopback */
- davinci_dma_link_lch(prtd->slave_lch, prtd->slave_lch);
+ prtd->slave_lch = ret;
+
+ /* Issue transfer completion IRQ when the channel completes a
+ * transfer, then always reload from the same slot (by a kind
+ * of loopback link). The completion IRQ handler will update
+ * the reload slot with a new buffer.
+ *
+ * REVISIT save p_ram here after setting up everything except
+ * the buffer and its length (ccnt) ... use it as a template
+ * so davinci_pcm_enqueue_dma() takes less time in IRQ.
+ */
+ edma_read_slot(prtd->slave_lch, &p_ram);
+ p_ram.opt |= TCINTEN | EDMA_TCC(prtd->master_lch);
+ p_ram.link_bcntrld = prtd->slave_lch << 5;
+ edma_write_slot(prtd->slave_lch, &p_ram);
return 0;
}
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- davinci_start_dma(prtd->master_lch);
+ edma_start(prtd->master_lch);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- davinci_stop_dma(prtd->master_lch);
+ edma_stop(prtd->master_lch);
break;
default:
ret = -EINVAL;
static int davinci_pcm_prepare(struct snd_pcm_substream *substream)
{
struct davinci_runtime_data *prtd = substream->runtime->private_data;
- struct paramentry_descriptor temp;
+ struct edmacc_param temp;
prtd->period = 0;
davinci_pcm_enqueue_dma(substream);
- /* Get slave channel dma params for master channel startup */
- davinci_get_dma_params(prtd->slave_lch, &temp);
- davinci_set_dma_params(prtd->master_lch, &temp);
+ /* Copy self-linked parameter RAM entry into master channel */
+ edma_read_slot(prtd->slave_lch, &temp);
+ edma_write_slot(prtd->master_lch, &temp);
return 0;
}
spin_lock(&prtd->lock);
- davinci_dma_getposition(prtd->master_lch, &src, &dst);
+ edma_get_position(prtd->master_lch, &src, &dst);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
count = src - runtime->dma_addr;
else
struct snd_pcm_runtime *runtime = substream->runtime;
struct davinci_runtime_data *prtd = runtime->private_data;
- davinci_dma_unlink_lch(prtd->slave_lch, prtd->slave_lch);
+ edma_unlink(prtd->slave_lch);
- davinci_free_dma(prtd->slave_lch);
- davinci_free_dma(prtd->master_lch);
+ edma_free_slot(prtd->slave_lch);
+ edma_free_channel(prtd->master_lch);
kfree(prtd);
static const struct snd_pcm_hardware psc_i2s_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER,
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
.rate_min = 8000,
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
module_init(n810_soc_init);
module_exit(n810_soc_exit);
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("ALSA SoC Nokia N810");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
break;
case SND_SOC_DAIFMT_DSP_B:
regs->srgr2 |= FPER(wlen * channels - 1);
- regs->srgr1 |= FWID(wlen * channels - 2);
+ regs->srgr1 |= FWID(0);
break;
}
{
struct omap_mcbsp_data *mcbsp_data = to_mcbsp(cpu_dai->private_data);
struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs;
+ unsigned int temp_fmt = fmt;
if (mcbsp_data->configured)
return 0;
/* 0-bit data delay */
regs->rcr2 |= RDATDLY(0);
regs->xcr2 |= XDATDLY(0);
+ /* Invert FS polarity configuration */
+ temp_fmt ^= SND_SOC_DAIFMT_NB_IF;
break;
default:
/* Unsupported data format */
}
/* Set bit clock (CLKX/CLKR) and FS polarities */
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+ switch (temp_fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
/*
* Normal BCLK + FS.
}
module_exit(snd_omap_mcbsp_exit);
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("OMAP I2S SoC Interface");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
}
module_exit(omap_soc_platform_exit);
-MODULE_AUTHOR("Jarkko Nikula <jarkko.nikula@nokia.com>");
+MODULE_AUTHOR("Jarkko Nikula <jhnikula@gmail.com>");
MODULE_DESCRIPTION("OMAP PCM DMA module");
MODULE_LICENSE("GPL");
*
* Copyright (C) 2008 Nokia Corporation
*
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
+ * Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
/* Set codec DAI configuration */
err = snd_soc_dai_set_fmt(codec_dai,
SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0) {
printk(KERN_ERR "can't set codec DAI configuration\n");
/* Set cpu DAI configuration */
err = snd_soc_dai_set_fmt(cpu_dai,
SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_IF |
+ SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBM_CFM);
if (err < 0) {
printk(KERN_ERR "can't set cpu DAI configuration\n");
#include <sound/soc.h>
#include <sound/soc-dapm.h>
-#include <mach/pxa-regs.h>
-#include <mach/hardware.h>
#include <mach/magician.h>
#include <asm/mach-types.h>
#include "../codecs/uda1380.h"
static struct platform_device *palm27x_snd_device;
-static int __init palm27x_asoc_init(void)
+static int palm27x_asoc_probe(struct platform_device *pdev)
{
int ret;
machine_is_palmld()))
return -ENODEV;
+ if (pdev->dev.platform_data)
+ palm27x_ep_gpio = ((struct palm27x_asoc_info *)
+ (pdev->dev.platform_data))->jack_gpio;
+
ret = gpio_request(palm27x_ep_gpio, "Headphone Jack");
if (ret)
return ret;
return ret;
}
-static void __exit palm27x_asoc_exit(void)
+static int __devexit palm27x_asoc_remove(struct platform_device *pdev)
{
free_irq(gpio_to_irq(palm27x_ep_gpio), NULL);
gpio_free(palm27x_ep_gpio);
platform_device_unregister(palm27x_snd_device);
+ return 0;
}
-void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data)
+static struct platform_driver palm27x_wm9712_driver = {
+ .probe = palm27x_asoc_probe,
+ .remove = __devexit_p(palm27x_asoc_remove),
+ .driver = {
+ .name = "palm27x-asoc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init palm27x_asoc_init(void)
+{
+ return platform_driver_register(&palm27x_wm9712_driver);
+}
+
+static void __exit palm27x_asoc_exit(void)
{
- palm27x_ep_gpio = data->jack_gpio;
+ platform_driver_unregister(&palm27x_wm9712_driver);
}
module_init(palm27x_asoc_init);
* ssp_set_clkdiv - set SSP clock divider
* @div: serial clock rate divider
*/
-static void ssp_set_scr(struct ssp_dev *dev, u32 div)
+static void ssp_set_scr(struct ssp_device *ssp, u32 div)
{
- struct ssp_device *ssp = dev->ssp;
- u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR;
+ u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+
+ if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+ sscr0 &= ~0x0000ff00;
+ sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
+ } else {
+ sscr0 &= ~0x000fff00;
+ sscr0 |= (div - 1) << 8; /* 1..4096 */
+ }
+ ssp_write_reg(ssp, SSCR0, sscr0);
+}
+
+/**
+ * ssp_get_clkdiv - get SSP clock divider
+ */
+static u32 ssp_get_scr(struct ssp_device *ssp)
+{
+ u32 sscr0 = ssp_read_reg(ssp, SSCR0);
+ u32 div;
- ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div)));
+ if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+ div = ((sscr0 >> 8) & 0xff) * 2 + 2;
+ else
+ div = ((sscr0 >> 8) & 0xfff) + 1;
+ return div;
}
/*
break;
case PXA_SSP_CLK_AUDIO:
priv->sysclk = 0;
- ssp_set_scr(&priv->dev, 1);
+ ssp_set_scr(ssp, 1);
sscr0 |= SSCR0_ACS;
break;
default:
ssp_write_reg(ssp, SSACD, val);
break;
case PXA_SSP_DIV_SCR:
- ssp_set_scr(&priv->dev, div);
+ ssp_set_scr(ssp, div);
break;
default:
return -ENODEV;
case SND_SOC_DAIFMT_I2S:
sspsp = ssp_read_reg(ssp, SSPSP);
- if (((sscr0 & SSCR0_SCR) == SSCR0_SerClkDiv(4)) &&
- (width == 16)) {
+ if ((ssp_get_scr(ssp) == 4) && (width == 16)) {
/* This is a special case where the bitclk is 64fs
* and we're not dealing with 2*32 bits of audio
* samples.
goto err_priv;
}
+ priv->dai_fmt = (unsigned int) -1;
dai->private_data = priv;
return 0;
config SND_S3C24XX_SOC
tristate "SoC Audio for the Samsung S3CXXXX chips"
- depends on ARCH_S3C2410 || ARCH_S3C64XX
+ depends on ARCH_S3C2410
help
Say Y or M if you want to add support for codecs attached to
- the S3C24XX and S3C64XX AC97, I2S or SSP interface. You will
- also need to select the audio interfaces to support below.
+ the S3C24XX AC97 or I2S interfaces. You will also need to
+ select the audio interfaces to support below.
config SND_S3C24XX_SOC_I2S
tristate
break;
}
- s3c_i2sv2_calc_rate(&div, NULL, params_rate(params),
- s3c2412_get_iisclk());
+ s3c_i2sv2_iis_calc_rate(&div, NULL, params_rate(params),
+ s3c2412_get_iisclk());
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
};
/* jive audio machine driver */
-static struct snd_soc_machine snd_soc_machine_jive = {
+static struct snd_soc_card snd_soc_machine_jive = {
.name = "Jive",
+ .platform = &s3c24xx_soc_platform,
.dai_link = &jive_dai,
.num_links = 1,
};
/* jive audio subsystem */
static struct snd_soc_device jive_snd_devdata = {
- .machine = &snd_soc_machine_jive,
- .platform = &s3c24xx_soc_platform,
- .codec_dev = &soc_codec_dev_wm8750_spi,
+ .card = &snd_soc_machine_jive,
+ .codec_dev = &soc_codec_dev_wm8750,
.codec_data = &jive_wm8750_setup,
};
/* default table of all avaialable root fs divisors */
static unsigned int iis_fs_tab[] = { 256, 512, 384, 768 };
-int s3c2412_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
- unsigned int *fstab,
- unsigned int rate, struct clk *clk)
+int s3c_i2sv2_iis_calc_rate(struct s3c_i2sv2_rate_calc *info,
+ unsigned int *fstab,
+ unsigned int rate, struct clk *clk)
{
unsigned long clkrate = clk_get_rate(clk);
unsigned int div;
return 0;
}
-EXPORT_SYMBOL_GPL(s3c2412_iis_calc_rate);
+EXPORT_SYMBOL_GPL(s3c_i2sv2_iis_calc_rate);
int s3c_i2sv2_probe(struct platform_device *pdev,
struct snd_soc_dai *dai,
int s3c_i2sv2_register_dai(struct snd_soc_dai *dai)
{
- dai->ops.trigger = s3c2412_i2s_trigger;
- dai->ops.hw_params = s3c2412_i2s_hw_params;
- dai->ops.set_fmt = s3c2412_i2s_set_fmt;
- dai->ops.set_clkdiv = s3c2412_i2s_set_clkdiv;
+ struct snd_soc_dai_ops *ops = dai->ops;
+
+ ops->trigger = s3c2412_i2s_trigger;
+ ops->hw_params = s3c2412_i2s_hw_params;
+ ops->set_fmt = s3c2412_i2s_set_fmt;
+ ops->set_clkdiv = s3c2412_i2s_set_clkdiv;
dai->suspend = s3c2412_i2s_suspend;
dai->resume = s3c2412_i2s_resume;
return snd_soc_register_dai(dai);
}
-
EXPORT_SYMBOL_GPL(s3c_i2sv2_register_dai);
+
+MODULE_LICENSE("GPL");
#include <plat/regs-s3c2412-iis.h>
-#include <plat/regs-gpio.h>
#include <plat/audio.h>
+#include <mach/regs-gpio.h>
#include <mach/dma.h>
#include "s3c24xx-pcm.h"
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = DMABRG_FMTS,
.rates = DMABRG_RATES,
.rate_min = 8000,
struct snd_soc_platform *platform = card->platform;
struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
+ if (!card->instantiated)
+ return 0;
+
run_delayed_work(&card->delayed_work);
if (platform->remove)
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_MU_LAW |
SNDRV_PCM_FMTBIT_A_LAW |
SNDRV_PCM_FMTBIT_U8 |
-snd-usb-caiaq-y := caiaq-device.o caiaq-audio.o caiaq-midi.o caiaq-control.o
-snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += caiaq-input.o
+snd-usb-caiaq-y := device.o audio.o midi.o control.o
+snd-usb-caiaq-$(CONFIG_SND_USB_CAIAQ_INPUT) += input.o
obj-$(CONFIG_SND_USB_CAIAQ) += snd-usb-caiaq.o
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
+#include <linux/spinlock.h>
#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
#include <linux/usb.h>
-#include <linux/spinlock.h>
#include <sound/core.h>
-#include <sound/initval.h>
#include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <linux/input.h>
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
+#include "device.h"
+#include "audio.h"
#define N_URBS 32
#define CLOCK_DRIFT_TOLERANCE 5
debug("%s(%p)\n", __func__, substream);
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ dev->period_out_count[index] = BYTES_PER_SAMPLE + 1;
dev->audio_out_buf_pos[index] = BYTES_PER_SAMPLE + 1;
- else
+ } else {
+ dev->period_in_count[index] = BYTES_PER_SAMPLE;
dev->audio_in_buf_pos[index] = BYTES_PER_SAMPLE;
-
+ }
+
if (dev->streaming)
return 0;
if (!sub)
continue;
- pb = frames_to_bytes(sub->runtime,
- sub->runtime->period_size);
+ pb = snd_pcm_lib_period_bytes(sub);
cnt = (sub->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
&dev->period_out_count[stream] :
&dev->period_in_count[stream];
*/
#include <linux/init.h>
-#include <linux/interrupt.h>
#include <linux/usb.h>
+#include <sound/control.h>
#include <sound/core.h>
-#include <sound/initval.h>
#include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <sound/control.h>
-#include <linux/input.h>
-#include "caiaq-device.h"
-#include "caiaq-control.h"
+#include "device.h"
+#include "control.h"
#define CNT_INTVAL 0x10000
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/init.h>
-#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/init.h>
#include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
#include <sound/initval.h>
+#include <sound/core.h>
#include <sound/pcm.h>
-#include <sound/rawmidi.h>
-#include <sound/control.h>
-
-#include "caiaq-device.h"
-#include "caiaq-audio.h"
-#include "caiaq-midi.h"
-#include "caiaq-control.h"
-#ifdef CONFIG_SND_USB_CAIAQ_INPUT
-#include "caiaq-input.h"
-#endif
+#include "device.h"
+#include "audio.h"
+#include "midi.h"
+#include "control.h"
+#include "input.h"
MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.13");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.14");
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
"{Native Instruments, RigKontrol3},"
*/
#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/input.h>
#include <linux/usb.h>
#include <linux/usb/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
-#include <sound/rawmidi.h>
#include <sound/pcm.h>
-#include "caiaq-device.h"
-#include "caiaq-input.h"
+
+#include "device.h"
+#include "input.h"
static unsigned short keycode_ak1[] = { KEY_C, KEY_B, KEY_A };
static unsigned short keycode_rk2[] = { KEY_1, KEY_2, KEY_3, KEY_4,
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
#include <linux/usb.h>
-#include <linux/input.h>
-#include <linux/spinlock.h>
-#include <sound/core.h>
#include <sound/rawmidi.h>
+#include <sound/core.h>
#include <sound/pcm.h>
-#include "caiaq-device.h"
-#include "caiaq-midi.h"
-
+#include "device.h"
+#include "midi.h"
static int snd_usb_caiaq_midi_input_open(struct snd_rawmidi_substream *substream)
{
if (cmd != SNDRV_USB_STREAM_IOCTL_SET_PARAMS)
return -ENOTTY;
- cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
- if (!cfg)
- return -ENOMEM;
+ cfg = memdup_user((void *)arg, sizeof(*cfg));
+ if (IS_ERR(cfg))
+ return PTR_ERR(cfg);
- if (copy_from_user(cfg, (void *)arg, sizeof(*cfg))) {
- err = -EFAULT;
- goto free;
- }
if (cfg->version != USB_STREAM_INTERFACE_VERSION) {
err = -ENXIO;
goto free;
return true;
}
+static void snd_us122l_free(struct snd_card *card)
+{
+ struct us122l *us122l = US122L(card);
+ int index = us122l->chip.index;
+ if (index >= 0 && index < SNDRV_CARDS)
+ snd_us122l_card_used[index] = 0;
+}
+
static int usx2y_create_card(struct usb_device *device, struct snd_card **cardp)
{
int dev;
if (err < 0)
return err;
snd_us122l_card_used[US122L(card)->chip.index = dev] = 1;
-
+ card->private_free = snd_us122l_free;
US122L(card)->chip.dev = device;
US122L(card)->chip.card = card;
mutex_init(&US122L(card)->mutex);
}
usb_put_intf(intf);
- usb_put_dev(US122L(card)->chip.dev);
+ usb_put_dev(us122l->chip.dev);
while (atomic_read(&us122l->mmap_count))
msleep(500);
if (access_ok(VERIFY_READ, dsp->image, dsp->length)) {
struct usb_device* dev = priv->chip.dev;
- char *buf = kmalloc(dsp->length, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
- if (copy_from_user(buf, dsp->image, dsp->length)) {
- kfree(buf);
- return -EFAULT;
- }
+ char *buf;
+
+ buf = memdup_user(dsp->image, dsp->length);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
err = usb_set_interface(dev, 0, 1);
if (err)
snd_printk(KERN_ERR "usb_set_interface error \n");
static void playback_prep_freqn(struct usb_stream_kernel *sk, struct urb *urb)
{
struct usb_stream *s = sk->s;
- unsigned l = 0;
- int pack;
-
- urb->iso_frame_desc[0].offset = 0;
- urb->iso_frame_desc[0].length = usb_stream_next_packet_size(sk);
- sk->out_phase = sk->out_phase_peeked;
- urb->transfer_buffer_length = urb->iso_frame_desc[0].length;
-
- for (pack = 1; pack < sk->n_o_ps; pack++) {
- l = usb_stream_next_packet_size(sk);
- if (s->idle_outsize + urb->transfer_buffer_length + l >
- s->period_size)
+ int pack, lb = 0;
+
+ for (pack = 0; pack < sk->n_o_ps; pack++) {
+ int l = usb_stream_next_packet_size(sk);
+ if (s->idle_outsize + lb + l > s->period_size)
goto check;
sk->out_phase = sk->out_phase_peeked;
- urb->iso_frame_desc[pack].offset = urb->transfer_buffer_length;
+ urb->iso_frame_desc[pack].offset = lb;
urb->iso_frame_desc[pack].length = l;
- urb->transfer_buffer_length += l;
+ lb += l;
}
- snd_printdd(KERN_DEBUG "%i\n", urb->transfer_buffer_length);
+ snd_printdd(KERN_DEBUG "%i\n", lb);
check:
urb->number_of_packets = pack;
- s->idle_outsize += urb->transfer_buffer_length - s->period_size;
+ urb->transfer_buffer_length = lb;
+ s->idle_outsize += lb - s->period_size;
snd_printdd(KERN_DEBUG "idle=%i ul=%i ps=%i\n", s->idle_outsize,
- urb->transfer_buffer_length, s->period_size);
+ lb, s->period_size);
}
static void init_pipe_urbs(struct usb_stream_kernel *sk, unsigned use_packsize,
struct usb_stream *s = sk->s;
struct urb *io;
struct usb_iso_packet_descriptor *id, *od;
- int p, l = 0;
+ int p = 0, lb = 0, l = 0;
io = sk->idle_outurb;
od = io->iso_frame_desc;
- io->transfer_buffer_length = 0;
- for (p = 0; s->sync_packet < 0; ++p, ++s->sync_packet) {
+ for (; s->sync_packet < 0; ++p, ++s->sync_packet) {
struct urb *ii = sk->completed_inurb;
id = ii->iso_frame_desc +
ii->number_of_packets + s->sync_packet;
l = id->actual_length;
od[p].length = l;
- od[p].offset = io->transfer_buffer_length;
- io->transfer_buffer_length += l;
+ od[p].offset = lb;
+ lb += l;
}
for (;
++p, ++s->sync_packet) {
l = inurb->iso_frame_desc[s->sync_packet].actual_length;
- if (s->idle_outsize + io->transfer_buffer_length + l >
- s->period_size)
+ if (s->idle_outsize + lb + l > s->period_size)
goto check_ok;
od[p].length = l;
- od[p].offset = io->transfer_buffer_length;
- io->transfer_buffer_length += l;
+ od[p].offset = lb;
+ lb += l;
}
check_ok:
s->sync_packet -= inurb->number_of_packets;
- if (s->sync_packet < -2 || s->sync_packet > 0) {
+ if (unlikely(s->sync_packet < -2 || s->sync_packet > 0)) {
snd_printk(KERN_WARNING "invalid sync_packet = %i;"
" p=%i nop=%i %i %x %x %x > %x\n",
s->sync_packet, p, inurb->number_of_packets,
- s->idle_outsize + io->transfer_buffer_length + l,
- s->idle_outsize, io->transfer_buffer_length, l,
+ s->idle_outsize + lb + l,
+ s->idle_outsize, lb, l,
s->period_size);
return -1;
}
- if (io->transfer_buffer_length % s->cfg.frame_size) {
+ if (unlikely(lb % s->cfg.frame_size)) {
snd_printk(KERN_WARNING"invalid outsize = %i\n",
- io->transfer_buffer_length);
+ lb);
return -1;
}
- s->idle_outsize += io->transfer_buffer_length - s->period_size;
+ s->idle_outsize += lb - s->period_size;
io->number_of_packets = p;
- if (s->idle_outsize > 0) {
- snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
- return -1;
- }
- return 0;
+ io->transfer_buffer_length = lb;
+ if (s->idle_outsize <= 0)
+ return 0;
+
+ snd_printk(KERN_WARNING "idle=%i\n", s->idle_outsize);
+ return -1;
}
static void prepare_inurb(int number_of_packets, struct urb *iu)
{
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE,
.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
.rate_min = 44100,
int r;
gfn_t base_gfn;
unsigned long npages;
+ int largepages;
unsigned long i;
struct kvm_memory_slot *memslot;
struct kvm_memory_slot old, new;
for (i = 0; i < KVM_MEMORY_SLOTS; ++i) {
struct kvm_memory_slot *s = &kvm->memslots[i];
- if (s == memslot)
+ if (s == memslot || !s->npages)
continue;
if (!((base_gfn + npages <= s->base_gfn) ||
(base_gfn >= s->base_gfn + s->npages)))
new.userspace_addr = 0;
}
if (npages && !new.lpage_info) {
- int largepages = npages / KVM_PAGES_PER_HPAGE;
- if (npages % KVM_PAGES_PER_HPAGE)
- largepages++;
- if (base_gfn % KVM_PAGES_PER_HPAGE)
- largepages++;
+ largepages = 1 + (base_gfn + npages - 1) / KVM_PAGES_PER_HPAGE;
+ largepages -= base_gfn / KVM_PAGES_PER_HPAGE;
new.lpage_info = vmalloc(largepages * sizeof(*new.lpage_info));
switch (arg) {
case KVM_CAP_USER_MEMORY:
case KVM_CAP_DESTROY_MEMORY_REGION_WORKS:
+ case KVM_CAP_JOIN_MEMORY_REGIONS_WORKS:
return 1;
#ifdef CONFIG_HAVE_KVM_IRQCHIP
case KVM_CAP_IRQ_ROUTING:
git.samba.org / sfrench / cifs-2.6.git / commitdiff
