#include <linux/acpi.h>
/* Information for net-next */
-#define NETNEXT_VERSION "08"
+#define NETNEXT_VERSION "09"
/* Information for net */
#define NET_VERSION "9"
#define PLA_FMC 0xc0b4
#define PLA_CFG_WOL 0xc0b6
#define PLA_TEREDO_CFG 0xc0bc
+#define PLA_TEREDO_WAKE_BASE 0xc0c4
#define PLA_MAR 0xcd00
#define PLA_BACKUP 0xd000
#define PAL_BDC_CR 0xd1a0
#define PLA_TEREDO_TIMER 0xd2cc
#define PLA_REALWOW_TIMER 0xd2e8
+#define PLA_EFUSE_DATA 0xdd00
+#define PLA_EFUSE_CMD 0xdd02
#define PLA_LEDSEL 0xdd90
#define PLA_LED_FEATURE 0xdd92
#define PLA_PHYAR 0xde00
#define USB_CSR_DUMMY2 0xb466
#define USB_DEV_STAT 0xb808
#define USB_CONNECT_TIMER 0xcbf8
+#define USB_MSC_TIMER 0xcbfc
#define USB_BURST_SIZE 0xcfc0
+#define USB_LPM_CONFIG 0xcfd8
#define USB_USB_CTRL 0xd406
#define USB_PHY_CTRL 0xd408
#define USB_TX_AGG 0xd40a
#define USB_USB_TIMER 0xd428
#define USB_RX_EARLY_TIMEOUT 0xd42c
#define USB_RX_EARLY_SIZE 0xd42e
-#define USB_PM_CTRL_STATUS 0xd432
+#define USB_PM_CTRL_STATUS 0xd432 /* RTL8153A */
+#define USB_RX_EXTRA_AGGR_TMR 0xd432 /* RTL8153B */
#define USB_TX_DMA 0xd434
+#define USB_UPT_RXDMA_OWN 0xd437
#define USB_TOLERANCE 0xd490
#define USB_LPM_CTRL 0xd41a
#define USB_BMU_RESET 0xd4b0
+#define USB_U1U2_TIMER 0xd4da
#define USB_UPS_CTRL 0xd800
-#define USB_MISC_0 0xd81a
#define USB_POWER_CUT 0xd80a
+#define USB_MISC_0 0xd81a
#define USB_AFE_CTRL2 0xd824
+#define USB_UPS_CFG 0xd842
+#define USB_UPS_FLAGS 0xd848
#define USB_WDT11_CTRL 0xe43c
#define USB_BP_BA 0xfc26
#define USB_BP_0 0xfc28
#define USB_BP_6 0xfc34
#define USB_BP_7 0xfc36
#define USB_BP_EN 0xfc38
+#define USB_BP_8 0xfc38
+#define USB_BP_9 0xfc3a
+#define USB_BP_10 0xfc3c
+#define USB_BP_11 0xfc3e
+#define USB_BP_12 0xfc40
+#define USB_BP_13 0xfc42
+#define USB_BP_14 0xfc44
+#define USB_BP_15 0xfc46
+#define USB_BP2_EN 0xfc48
/* OCP Registers */
#define OCP_ALDPS_CONFIG 0x2010
#define OCP_EEE_AR 0xa41a
#define OCP_EEE_DATA 0xa41c
#define OCP_PHY_STATUS 0xa420
+#define OCP_NCTL_CFG 0xa42c
#define OCP_POWER_CFG 0xa430
#define OCP_EEE_CFG 0xa432
#define OCP_SRAM_ADDR 0xa436
#define OCP_EEE_ADV 0xa5d0
#define OCP_EEE_LPABLE 0xa5d2
#define OCP_PHY_STATE 0xa708 /* nway state for 8153 */
+#define OCP_PHY_PATCH_STAT 0xb800
+#define OCP_PHY_PATCH_CMD 0xb820
+#define OCP_ADC_IOFFSET 0xbcfc
#define OCP_ADC_CFG 0xbc06
+#define OCP_SYSCLK_CFG 0xc416
/* SRAM Register */
+#define SRAM_GREEN_CFG 0x8011
#define SRAM_LPF_CFG 0x8012
#define SRAM_10M_AMP1 0x8080
#define SRAM_10M_AMP2 0x8082
/* PAL_BDC_CR */
#define ALDPS_PROXY_MODE 0x0001
+/* PLA_EFUSE_CMD */
+#define EFUSE_READ_CMD BIT(15)
+#define EFUSE_DATA_BIT16 BIT(7)
+
/* PLA_CONFIG34 */
#define LINK_ON_WAKE_EN 0x0010
#define LINK_OFF_WAKE_EN 0x0008
/* PLA_MAC_PWR_CTRL2 */
#define EEE_SPDWN_RATIO 0x8007
+#define MAC_CLK_SPDWN_EN BIT(15)
/* PLA_MAC_PWR_CTRL3 */
#define PKT_AVAIL_SPDWN_EN 0x0100
#define STAT_SPEED_HIGH 0x0000
#define STAT_SPEED_FULL 0x0002
+/* USB_LPM_CONFIG */
+#define LPM_U1U2_EN BIT(0)
+
/* USB_TX_AGG */
#define TX_AGG_MAX_THRESHOLD 0x03
#define RX_THR_SUPPER 0x0c350180
#define RX_THR_HIGH 0x7a120180
#define RX_THR_SLOW 0xffff0180
+#define RX_THR_B 0x00010001
/* USB_TX_DMA */
#define TEST_MODE_DISABLE 0x00000001
#define BMU_RESET_EP_IN 0x01
#define BMU_RESET_EP_OUT 0x02
+/* USB_UPT_RXDMA_OWN */
+#define OWN_UPDATE BIT(0)
+#define OWN_CLEAR BIT(1)
+
/* USB_UPS_CTRL */
#define POWER_CUT 0x0100
/* USB_POWER_CUT */
#define PWR_EN 0x0001
#define PHASE2_EN 0x0008
+#define UPS_EN BIT(4)
+#define USP_PREWAKE BIT(5)
/* USB_MISC_0 */
#define PCUT_STATUS 0x0001
#define SEN_VAL_NORMAL 0xa000
#define SEL_RXIDLE 0x0100
+/* USB_UPS_CFG */
+#define SAW_CNT_1MS_MASK 0x0fff
+
+/* USB_UPS_FLAGS */
+#define UPS_FLAGS_R_TUNE BIT(0)
+#define UPS_FLAGS_EN_10M_CKDIV BIT(1)
+#define UPS_FLAGS_250M_CKDIV BIT(2)
+#define UPS_FLAGS_EN_ALDPS BIT(3)
+#define UPS_FLAGS_CTAP_SHORT_DIS BIT(4)
+#define UPS_FLAGS_SPEED_MASK (0xf << 16)
+#define ups_flags_speed(x) ((x) << 16)
+#define UPS_FLAGS_EN_EEE BIT(20)
+#define UPS_FLAGS_EN_500M_EEE BIT(21)
+#define UPS_FLAGS_EN_EEE_CKDIV BIT(22)
+#define UPS_FLAGS_EEE_PLLOFF_GIGA BIT(24)
+#define UPS_FLAGS_EEE_CMOD_LV_EN BIT(25)
+#define UPS_FLAGS_EN_GREEN BIT(26)
+#define UPS_FLAGS_EN_FLOW_CTR BIT(27)
+
+enum spd_duplex {
+ NWAY_10M_HALF = 1,
+ NWAY_10M_FULL,
+ NWAY_100M_HALF,
+ NWAY_100M_FULL,
+ NWAY_1000M_FULL,
+ FORCE_10M_HALF,
+ FORCE_10M_FULL,
+ FORCE_100M_HALF,
+ FORCE_100M_FULL,
+};
+
/* OCP_ALDPS_CONFIG */
#define ENPWRSAVE 0x8000
#define ENPDNPS 0x0200
#define PHY_STAT_LAN_ON 3
#define PHY_STAT_PWRDN 5
+/* OCP_NCTL_CFG */
+#define PGA_RETURN_EN BIT(1)
+
/* OCP_POWER_CFG */
#define EEE_CLKDIV_EN 0x8000
#define EN_ALDPS 0x0004
#define EEE10_EN 0x0010
/* OCP_DOWN_SPEED */
+#define EN_EEE_CMODE BIT(14)
+#define EN_EEE_1000 BIT(13)
+#define EN_EEE_100 BIT(12)
+#define EN_10M_CLKDIV BIT(11)
#define EN_10M_BGOFF 0x0080
/* OCP_PHY_STATE */
#define TXDIS_STATE 0x01
#define ABD_STATE 0x02
+/* OCP_PHY_PATCH_STAT */
+#define PATCH_READY BIT(6)
+
+/* OCP_PHY_PATCH_CMD */
+#define PATCH_REQUEST BIT(4)
+
/* OCP_ADC_CFG */
#define CKADSEL_L 0x0100
#define ADC_EN 0x0080
#define EN_EMI_L 0x0040
+/* OCP_SYSCLK_CFG */
+#define clk_div_expo(x) (min(x, 5) << 8)
+
+/* SRAM_GREEN_CFG */
+#define GREEN_ETH_EN BIT(15)
+#define R_TUNE_EN BIT(11)
+
/* SRAM_LPF_CFG */
#define LPF_AUTO_TUNE 0x8000
SELECTIVE_SUSPEND,
PHY_RESET,
SCHEDULE_NAPI,
+ GREEN_ETHERNET,
};
/* Define these values to match your device */
RTL_VER_05,
RTL_VER_06,
RTL_VER_07,
+ RTL_VER_08,
+ RTL_VER_09,
RTL_VER_MAX
};
ocp_reg_write(tp, OCP_SRAM_DATA, data);
}
+static u16 sram_read(struct r8152 *tp, u16 addr)
+{
+ ocp_reg_write(tp, OCP_SRAM_ADDR, addr);
+ return ocp_reg_read(tp, OCP_SRAM_DATA);
+}
+
static int read_mii_word(struct net_device *netdev, int phy_id, int reg)
{
struct r8152 *tp = netdev_priv(netdev);
return rtl_enable(tp);
}
+static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
+{
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
+ OWN_UPDATE | OWN_CLEAR);
+}
+
static void r8153_set_rx_early_timeout(struct r8152 *tp)
{
u32 ocp_data = tp->coalesce / 8;
- ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, ocp_data);
+ switch (tp->version) {
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
+ ocp_data);
+ break;
+
+ case RTL_VER_08:
+ case RTL_VER_09:
+ /* The RTL8153B uses USB_RX_EXTRA_AGGR_TMR for rx timeout
+ * primarily. For USB_RX_EARLY_TIMEOUT, we fix it to 128ns.
+ */
+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT,
+ 128 / 8);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EXTRA_AGGR_TMR,
+ ocp_data);
+ r8153b_rx_agg_chg_indicate(tp);
+ break;
+
+ default:
+ break;
+ }
}
static void r8153_set_rx_early_size(struct r8152 *tp)
{
- u32 ocp_data = (agg_buf_sz - rx_reserved_size(tp->netdev->mtu)) / 4;
+ u32 ocp_data = agg_buf_sz - rx_reserved_size(tp->netdev->mtu);
- ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data);
+ switch (tp->version) {
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
+ ocp_data / 4);
+ break;
+ case RTL_VER_08:
+ case RTL_VER_09:
+ ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE,
+ ocp_data / 8);
+ r8153b_rx_agg_chg_indicate(tp);
+ break;
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
}
static int rtl8153_enable(struct r8152 *tp)
usb_ocp_write(tp, USB_TOLERANCE, BYTE_EN_SIX_BYTES, sizeof(u1u2), u1u2);
}
+static void r8153b_u1u2en(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG);
+ if (enable)
+ ocp_data |= LPM_U1U2_EN;
+ else
+ ocp_data &= ~LPM_U1U2_EN;
+
+ ocp_write_word(tp, MCU_TYPE_USB, USB_LPM_CONFIG, ocp_data);
+}
+
static void r8153_u2p3en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
ocp_write_word(tp, MCU_TYPE_USB, USB_U2P3_CTRL, ocp_data);
}
+static void r8153b_ups_flags_w1w0(struct r8152 *tp, u32 set, u32 clear)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS);
+ ocp_data &= ~clear;
+ ocp_data |= set;
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_UPS_FLAGS, ocp_data);
+}
+
+static void r8153b_green_en(struct r8152 *tp, bool enable)
+{
+ u16 data;
+
+ if (enable) {
+ sram_write(tp, 0x8045, 0); /* 10M abiq&ldvbias */
+ sram_write(tp, 0x804d, 0x1222); /* 100M short abiq&ldvbias */
+ sram_write(tp, 0x805d, 0x0022); /* 1000M short abiq&ldvbias */
+ } else {
+ sram_write(tp, 0x8045, 0x2444); /* 10M abiq&ldvbias */
+ sram_write(tp, 0x804d, 0x2444); /* 100M short abiq&ldvbias */
+ sram_write(tp, 0x805d, 0x2444); /* 1000M short abiq&ldvbias */
+ }
+
+ data = sram_read(tp, SRAM_GREEN_CFG);
+ data |= GREEN_ETH_EN;
+ sram_write(tp, SRAM_GREEN_CFG, data);
+
+ r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_GREEN, 0);
+}
+
static u16 r8153_phy_status(struct r8152 *tp, u16 desired)
{
u16 data;
return data;
}
+static void r8153b_ups_en(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_POWER_CUT);
+
+ if (enable) {
+ ocp_data |= UPS_EN | USP_PREWAKE | PHASE2_EN;
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
+ ocp_data |= BIT(0);
+ ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
+ } else {
+ u16 data;
+
+ ocp_data &= ~(UPS_EN | USP_PREWAKE);
+ ocp_write_byte(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, 0xcfff);
+ ocp_data &= ~BIT(0);
+ ocp_write_byte(tp, MCU_TYPE_USB, 0xcfff, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+ ocp_data &= ~PCUT_STATUS;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+
+ data = r8153_phy_status(tp, 0);
+
+ switch (data) {
+ case PHY_STAT_PWRDN:
+ case PHY_STAT_EXT_INIT:
+ r8153b_green_en(tp,
+ test_bit(GREEN_ETHERNET, &tp->flags));
+
+ data = r8152_mdio_read(tp, MII_BMCR);
+ data &= ~BMCR_PDOWN;
+ data |= BMCR_RESET;
+ r8152_mdio_write(tp, MII_BMCR, data);
+
+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+
+ default:
+ if (data != PHY_STAT_LAN_ON)
+ netif_warn(tp, link, tp->netdev,
+ "PHY not ready");
+ break;
+ }
+ }
+}
+
static void r8153_power_cut_en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
}
+static void r8153b_power_cut_en(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_POWER_CUT);
+ if (enable)
+ ocp_data |= PWR_EN | PHASE2_EN;
+ else
+ ocp_data &= ~PWR_EN;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_POWER_CUT, ocp_data);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_MISC_0);
+ ocp_data &= ~PCUT_STATUS;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_MISC_0, ocp_data);
+}
+
+static void r8153b_queue_wake(struct r8152 *tp, bool enable)
+{
+ u32 ocp_data;
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, 0xd38a);
+ if (enable)
+ ocp_data |= BIT(0);
+ else
+ ocp_data &= ~BIT(0);
+ ocp_write_byte(tp, MCU_TYPE_PLA, 0xd38a, ocp_data);
+
+ ocp_data = ocp_read_byte(tp, MCU_TYPE_PLA, 0xd38c);
+ ocp_data &= ~BIT(0);
+ ocp_write_byte(tp, MCU_TYPE_PLA, 0xd38c, ocp_data);
+}
+
static bool rtl_can_wakeup(struct r8152 *tp)
{
struct usb_device *udev = tp->udev;
}
}
+static void rtl8153b_runtime_enable(struct r8152 *tp, bool enable)
+{
+ if (enable) {
+ r8153b_queue_wake(tp, true);
+ r8153b_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
+ rtl_runtime_suspend_enable(tp, true);
+ r8153b_ups_en(tp, true);
+ } else {
+ r8153b_ups_en(tp, false);
+ r8153b_queue_wake(tp, false);
+ rtl_runtime_suspend_enable(tp, false);
+ r8153_u2p3en(tp, true);
+ r8153b_u1u2en(tp, true);
+ }
+}
+
static void r8153_teredo_off(struct r8152 *tp)
{
u32 ocp_data;
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
- ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK | OOB_TEREDO_EN);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+ switch (tp->version) {
+ case RTL_VER_01:
+ case RTL_VER_02:
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ case RTL_VER_07:
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+ ocp_data &= ~(TEREDO_SEL | TEREDO_RS_EVENT_MASK |
+ OOB_TEREDO_EN);
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+ break;
+
+ case RTL_VER_08:
+ case RTL_VER_09:
+ /* The bit 0 ~ 7 are relative with teredo settings. They are
+ * W1C (write 1 to clear), so set all 1 to disable it.
+ */
+ ocp_write_byte(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, 0xff);
+ break;
+
+ default:
+ break;
+ }
ocp_write_word(tp, MCU_TYPE_PLA, PLA_WDT6_CTRL, WDT6_SET_MODE);
ocp_write_word(tp, MCU_TYPE_PLA, PLA_REALWOW_TIMER, 0);
ocp_write_dword(tp, MCU_TYPE_PLA, PLA_RCR, ocp_data);
}
+static int r8153_patch_request(struct r8152 *tp, bool request)
+{
+ u16 data;
+ int i;
+
+ data = ocp_reg_read(tp, OCP_PHY_PATCH_CMD);
+ if (request)
+ data |= PATCH_REQUEST;
+ else
+ data &= ~PATCH_REQUEST;
+ ocp_reg_write(tp, OCP_PHY_PATCH_CMD, data);
+
+ for (i = 0; request && i < 5000; i++) {
+ usleep_range(1000, 2000);
+ if (ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)
+ break;
+ }
+
+ if (request && !(ocp_reg_read(tp, OCP_PHY_PATCH_STAT) & PATCH_READY)) {
+ netif_err(tp, drv, tp->netdev, "patch request fail\n");
+ r8153_patch_request(tp, false);
+ return -ETIME;
+ } else {
+ return 0;
+ }
+}
+
static void r8153_aldps_en(struct r8152 *tp, bool enable)
{
u16 data;
}
}
+static void r8153b_aldps_en(struct r8152 *tp, bool enable)
+{
+ r8153_aldps_en(tp, enable);
+
+ if (enable)
+ r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_ALDPS, 0);
+ else
+ r8153b_ups_flags_w1w0(tp, 0, UPS_FLAGS_EN_ALDPS);
+}
+
static void r8153_eee_en(struct r8152 *tp, bool enable)
{
u32 ocp_data;
ocp_reg_write(tp, OCP_EEE_CFG, config);
}
+static void r8153b_eee_en(struct r8152 *tp, bool enable)
+{
+ r8153_eee_en(tp, enable);
+
+ if (enable)
+ r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_EEE, 0);
+ else
+ r8153b_ups_flags_w1w0(tp, 0, UPS_FLAGS_EN_EEE);
+}
+
+static void r8153b_enable_fc(struct r8152 *tp)
+{
+ r8152b_enable_fc(tp);
+ r8153b_ups_flags_w1w0(tp, UPS_FLAGS_EN_FLOW_CTR, 0);
+}
+
static void r8153_hw_phy_cfg(struct r8152 *tp)
{
u32 ocp_data;
set_bit(PHY_RESET, &tp->flags);
}
+static u32 r8152_efuse_read(struct r8152 *tp, u8 addr)
+{
+ u32 ocp_data;
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD, EFUSE_READ_CMD | addr);
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_CMD);
+ ocp_data = (ocp_data & EFUSE_DATA_BIT16) << 9; /* data of bit16 */
+ ocp_data |= ocp_read_word(tp, MCU_TYPE_PLA, PLA_EFUSE_DATA);
+
+ return ocp_data;
+}
+
+static void r8153b_hw_phy_cfg(struct r8152 *tp)
+{
+ u32 ocp_data, ups_flags = 0;
+ u16 data;
+
+ /* disable ALDPS before updating the PHY parameters */
+ r8153b_aldps_en(tp, false);
+
+ /* disable EEE before updating the PHY parameters */
+ r8153b_eee_en(tp, false);
+ ocp_reg_write(tp, OCP_EEE_ADV, 0);
+
+ r8153b_green_en(tp, test_bit(GREEN_ETHERNET, &tp->flags));
+
+ data = sram_read(tp, SRAM_GREEN_CFG);
+ data |= R_TUNE_EN;
+ sram_write(tp, SRAM_GREEN_CFG, data);
+ data = ocp_reg_read(tp, OCP_NCTL_CFG);
+ data |= PGA_RETURN_EN;
+ ocp_reg_write(tp, OCP_NCTL_CFG, data);
+
+ /* ADC Bias Calibration:
+ * read efuse offset 0x7d to get a 17-bit data. Remove the dummy/fake
+ * bit (bit3) to rebuild the real 16-bit data. Write the data to the
+ * ADC ioffset.
+ */
+ ocp_data = r8152_efuse_read(tp, 0x7d);
+ data = (u16)(((ocp_data & 0x1fff0) >> 1) | (ocp_data & 0x7));
+ if (data != 0xffff)
+ ocp_reg_write(tp, OCP_ADC_IOFFSET, data);
+
+ /* ups mode tx-link-pulse timing adjustment:
+ * rg_saw_cnt = OCP reg 0xC426 Bit[13:0]
+ * swr_cnt_1ms_ini = 16000000 / rg_saw_cnt
+ */
+ ocp_data = ocp_reg_read(tp, 0xc426);
+ ocp_data &= 0x3fff;
+ if (ocp_data) {
+ u32 swr_cnt_1ms_ini;
+
+ swr_cnt_1ms_ini = (16000000 / ocp_data) & SAW_CNT_1MS_MASK;
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_UPS_CFG);
+ ocp_data = (ocp_data & ~SAW_CNT_1MS_MASK) | swr_cnt_1ms_ini;
+ ocp_write_word(tp, MCU_TYPE_USB, USB_UPS_CFG, ocp_data);
+ }
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR);
+ ocp_data |= PFM_PWM_SWITCH;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_PHY_PWR, ocp_data);
+
+ /* Advnace EEE */
+ if (!r8153_patch_request(tp, true)) {
+ data = ocp_reg_read(tp, OCP_POWER_CFG);
+ data |= EEE_CLKDIV_EN;
+ ocp_reg_write(tp, OCP_POWER_CFG, data);
+
+ data = ocp_reg_read(tp, OCP_DOWN_SPEED);
+ data |= EN_EEE_CMODE | EN_EEE_1000 | EN_10M_CLKDIV;
+ ocp_reg_write(tp, OCP_DOWN_SPEED, data);
+
+ ocp_reg_write(tp, OCP_SYSCLK_CFG, 0);
+ ocp_reg_write(tp, OCP_SYSCLK_CFG, clk_div_expo(5));
+
+ ups_flags |= UPS_FLAGS_EN_10M_CKDIV | UPS_FLAGS_250M_CKDIV |
+ UPS_FLAGS_EN_EEE_CKDIV | UPS_FLAGS_EEE_CMOD_LV_EN |
+ UPS_FLAGS_EEE_PLLOFF_GIGA;
+
+ r8153_patch_request(tp, false);
+ }
+
+ r8153b_ups_flags_w1w0(tp, ups_flags, 0);
+
+ r8153b_eee_en(tp, true);
+ ocp_reg_write(tp, OCP_EEE_ADV, MDIO_EEE_1000T | MDIO_EEE_100TX);
+
+ r8153b_aldps_en(tp, true);
+ r8153b_enable_fc(tp);
+ r8153_u2p3en(tp, true);
+
+ set_bit(PHY_RESET, &tp->flags);
+}
+
static void r8153_first_init(struct r8152 *tp)
{
u32 ocp_data;
ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + CRC_SIZE;
ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
- ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
- ocp_data &= ~TEREDO_WAKE_MASK;
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+ switch (tp->version) {
+ case RTL_VER_03:
+ case RTL_VER_04:
+ case RTL_VER_05:
+ case RTL_VER_06:
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
+ ocp_data &= ~TEREDO_WAKE_MASK;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG, ocp_data);
+ break;
+
+ case RTL_VER_08:
+ case RTL_VER_09:
+ /* Clear teredo wake event. bit[15:8] is the teredo wakeup
+ * type. Set it to zero. bits[7:0] are the W1C bits about
+ * the events. Set them to all 1 to clear them.
+ */
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_TEREDO_WAKE_BASE, 0x00ff);
+ break;
+
+ default:
+ break;
+ }
rtl_rx_vlan_en(tp, true);
r8153_aldps_en(tp, true);
}
+static void rtl8153b_disable(struct r8152 *tp)
+{
+ r8153b_aldps_en(tp, false);
+ rtl_disable(tp);
+ rtl_reset_bmu(tp);
+ r8153b_aldps_en(tp, true);
+}
+
static int rtl8152_set_speed(struct r8152 *tp, u8 autoneg, u16 speed, u8 duplex)
{
u16 bmcr, anar, gbcr;
+ enum spd_duplex speed_duplex;
int ret = 0;
anar = r8152_mdio_read(tp, MII_ADVERTISE);
if (speed == SPEED_10) {
bmcr = 0;
anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
+ speed_duplex = FORCE_10M_HALF;
} else if (speed == SPEED_100) {
bmcr = BMCR_SPEED100;
anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+ speed_duplex = FORCE_100M_HALF;
} else if (speed == SPEED_1000 && tp->mii.supports_gmii) {
bmcr = BMCR_SPEED1000;
gbcr |= ADVERTISE_1000FULL | ADVERTISE_1000HALF;
+ speed_duplex = NWAY_1000M_FULL;
} else {
ret = -EINVAL;
goto out;
}
- if (duplex == DUPLEX_FULL)
+ if (duplex == DUPLEX_FULL) {
bmcr |= BMCR_FULLDPLX;
+ if (speed != SPEED_1000)
+ speed_duplex++;
+ }
} else {
if (speed == SPEED_10) {
- if (duplex == DUPLEX_FULL)
+ if (duplex == DUPLEX_FULL) {
anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
- else
+ speed_duplex = NWAY_10M_FULL;
+ } else {
anar |= ADVERTISE_10HALF;
+ speed_duplex = NWAY_10M_HALF;
+ }
} else if (speed == SPEED_100) {
if (duplex == DUPLEX_FULL) {
anar |= ADVERTISE_10HALF | ADVERTISE_10FULL;
anar |= ADVERTISE_100HALF | ADVERTISE_100FULL;
+ speed_duplex = NWAY_100M_FULL;
} else {
anar |= ADVERTISE_10HALF;
anar |= ADVERTISE_100HALF;
+ speed_duplex = NWAY_100M_HALF;
}
} else if (speed == SPEED_1000 && tp->mii.supports_gmii) {
if (duplex == DUPLEX_FULL) {
anar |= ADVERTISE_100HALF;
gbcr |= ADVERTISE_1000HALF;
}
+ speed_duplex = NWAY_1000M_FULL;
} else {
ret = -EINVAL;
goto out;
r8152_mdio_write(tp, MII_ADVERTISE, anar);
r8152_mdio_write(tp, MII_BMCR, bmcr);
+ switch (tp->version) {
+ case RTL_VER_08:
+ case RTL_VER_09:
+ r8153b_ups_flags_w1w0(tp, ups_flags_speed(speed_duplex),
+ UPS_FLAGS_SPEED_MASK);
+ break;
+
+ default:
+ break;
+ }
+
if (bmcr & BMCR_RESET) {
int i;
r8153_aldps_en(tp, true);
}
+static void rtl8153b_up(struct r8152 *tp)
+{
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return;
+
+ r8153b_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
+ r8153b_aldps_en(tp, false);
+
+ r8153_first_init(tp);
+ ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_B);
+
+ r8153b_aldps_en(tp, true);
+ r8153_u2p3en(tp, true);
+ r8153b_u1u2en(tp, true);
+}
+
+static void rtl8153b_down(struct r8152 *tp)
+{
+ if (test_bit(RTL8152_UNPLUG, &tp->flags)) {
+ rtl_drop_queued_tx(tp);
+ return;
+ }
+
+ r8153b_u1u2en(tp, false);
+ r8153_u2p3en(tp, false);
+ r8153b_power_cut_en(tp, false);
+ r8153b_aldps_en(tp, false);
+ r8153_enter_oob(tp);
+ r8153b_aldps_en(tp, true);
+}
+
static bool rtl8152_in_nway(struct r8152 *tp)
{
u16 nway_state;
}
}
+static void r8153b_init(struct r8152 *tp)
+{
+ u32 ocp_data;
+ u16 data;
+ int i;
+
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return;
+
+ r8153b_u1u2en(tp, false);
+
+ for (i = 0; i < 500; i++) {
+ if (ocp_read_word(tp, MCU_TYPE_PLA, PLA_BOOT_CTRL) &
+ AUTOLOAD_DONE)
+ break;
+ msleep(20);
+ }
+
+ data = r8153_phy_status(tp, 0);
+
+ data = r8152_mdio_read(tp, MII_BMCR);
+ if (data & BMCR_PDOWN) {
+ data &= ~BMCR_PDOWN;
+ r8152_mdio_write(tp, MII_BMCR, data);
+ }
+
+ data = r8153_phy_status(tp, PHY_STAT_LAN_ON);
+
+ r8153_u2p3en(tp, false);
+
+ /* MSC timer = 0xfff * 8ms = 32760 ms */
+ ocp_write_word(tp, MCU_TYPE_USB, USB_MSC_TIMER, 0x0fff);
+
+ /* U1/U2/L1 idle timer. 500 us */
+ ocp_write_word(tp, MCU_TYPE_USB, USB_U1U2_TIMER, 500);
+
+ r8153b_power_cut_en(tp, false);
+ r8153b_ups_en(tp, false);
+ r8153b_queue_wake(tp, false);
+ rtl_runtime_suspend_enable(tp, false);
+ r8153b_u1u2en(tp, true);
+ usb_enable_lpm(tp->udev);
+
+ /* MAC clock speed down */
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2);
+ ocp_data |= MAC_CLK_SPDWN_EN;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL2, ocp_data);
+
+ set_bit(GREEN_ETHERNET, &tp->flags);
+
+ /* rx aggregation */
+ ocp_data = ocp_read_word(tp, MCU_TYPE_USB, USB_USB_CTRL);
+ ocp_data &= ~(RX_AGG_DISABLE | RX_ZERO_EN);
+ ocp_write_word(tp, MCU_TYPE_USB, USB_USB_CTRL, ocp_data);
+
+ rtl_tally_reset(tp);
+
+ tp->coalesce = 15000; /* 15 us */
+}
+
static int rtl8152_pre_reset(struct usb_interface *intf)
{
struct r8152 *tp = usb_get_intfdata(intf);
return 0;
}
+static int r8153b_set_eee(struct r8152 *tp, struct ethtool_eee *eee)
+{
+ u16 val = ethtool_adv_to_mmd_eee_adv_t(eee->advertised);
+
+ r8153b_eee_en(tp, eee->eee_enabled);
+
+ if (!eee->eee_enabled)
+ val = 0;
+
+ ocp_reg_write(tp, OCP_EEE_ADV, val);
+
+ return 0;
+}
+
static int
rtl_ethtool_get_eee(struct net_device *net, struct ethtool_eee *edata)
{
r8153_power_cut_en(tp, false);
}
+static void rtl8153b_unload(struct r8152 *tp)
+{
+ if (test_bit(RTL8152_UNPLUG, &tp->flags))
+ return;
+
+ r8153b_power_cut_en(tp, false);
+}
+
static int rtl_ops_init(struct r8152 *tp)
{
struct rtl_ops *ops = &tp->rtl_ops;
ops->autosuspend_en = rtl8153_runtime_enable;
break;
+ case RTL_VER_08:
+ case RTL_VER_09:
+ ops->init = r8153b_init;
+ ops->enable = rtl8153_enable;
+ ops->disable = rtl8153b_disable;
+ ops->up = rtl8153b_up;
+ ops->down = rtl8153b_down;
+ ops->unload = rtl8153b_unload;
+ ops->eee_get = r8153_get_eee;
+ ops->eee_set = r8153b_set_eee;
+ ops->in_nway = rtl8153_in_nway;
+ ops->hw_phy_cfg = r8153b_hw_phy_cfg;
+ ops->autosuspend_en = rtl8153b_runtime_enable;
+ break;
+
default:
ret = -ENODEV;
netif_err(tp, probe, tp->netdev, "Unknown Device\n");
case 0x4800:
version = RTL_VER_07;
break;
+ case 0x6000:
+ version = RTL_VER_08;
+ break;
+ case 0x6010:
+ version = RTL_VER_09;
+ break;
default:
version = RTL_VER_UNKNOWN;
dev_info(&intf->dev, "Unknown version 0x%04x\n", ocp_data);
git.samba.org / sfrench / cifs-2.6.git / commitdiff