+++ /dev/null
-#!/bin/sh
-
-TEST_FILE=$(mktemp)
-
-echo "== Testing sysctl behavior against ${TARGET} =="
-
-set_orig()
-{
- echo "${ORIG}" > "${TARGET}"
-}
-
-set_test()
-{
- echo "${TEST_STR}" > "${TARGET}"
-}
-
-verify()
-{
- local seen
- seen=$(cat "$1")
- if [ "${seen}" != "${TEST_STR}" ]; then
- return 1
- fi
- return 0
-}
-
-exit_test()
-{
- if [ ! -z ${old_strict} ]; then
- echo ${old_strict} > ${WRITES_STRICT}
- fi
- exit $rc
-}
-
-trap 'set_orig; rm -f "${TEST_FILE}"' EXIT
-
-rc=0
-
-echo -n "Writing test file ... "
-echo "${TEST_STR}" > "${TEST_FILE}"
-if ! verify "${TEST_FILE}"; then
- echo "FAIL" >&2
- exit 1
-else
- echo "ok"
-fi
-
-echo -n "Checking sysctl is not set to test value ... "
-if verify "${TARGET}"; then
- echo "FAIL" >&2
- exit 1
-else
- echo "ok"
-fi
-
-echo -n "Writing sysctl from shell ... "
-set_test
-if ! verify "${TARGET}"; then
- echo "FAIL" >&2
- exit 1
-else
- echo "ok"
-fi
-
-echo -n "Resetting sysctl to original value ... "
-set_orig
-if verify "${TARGET}"; then
- echo "FAIL" >&2
- exit 1
-else
- echo "ok"
-fi
-
-echo -n "Checking write strict setting ... "
-WRITES_STRICT="${SYSCTL}/kernel/sysctl_writes_strict"
-if [ ! -e ${WRITES_STRICT} ]; then
- echo "FAIL, but skip in case of old kernel" >&2
-else
- old_strict=$(cat ${WRITES_STRICT})
- if [ "$old_strict" = "1" ]; then
- echo "ok"
- else
- echo "FAIL, strict value is 0 but force to 1 to continue" >&2
- echo "1" > ${WRITES_STRICT}
- fi
-fi
-
-# Now that we've validated the sanity of "set_test" and "set_orig",
-# we can use those functions to set starting states before running
-# specific behavioral tests.
-
-echo -n "Writing entire sysctl in single write ... "
-set_orig
-dd if="${TEST_FILE}" of="${TARGET}" bs=4096 2>/dev/null
-if ! verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Writing middle of sysctl after synchronized seek ... "
-set_test
-dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 skip=1 2>/dev/null
-if ! verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Writing beyond end of sysctl ... "
-set_orig
-dd if="${TEST_FILE}" of="${TARGET}" bs=20 seek=2 2>/dev/null
-if verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
-
-echo -n "Writing sysctl with multiple long writes ... "
-set_orig
-(perl -e 'print "A" x 50;'; echo "${TEST_STR}") | \
- dd of="${TARGET}" bs=50 2>/dev/null
-if verify "${TARGET}"; then
- echo "FAIL" >&2
- rc=1
-else
- echo "ok"
-fi
--- /dev/null
+#!/bin/bash
+# Copyright (C) 2017 Luis R. Rodriguez <mcgrof@kernel.org>
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or at your option any
+# later version; or, when distributed separately from the Linux kernel or
+# when incorporated into other software packages, subject to the following
+# license:
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of copyleft-next (version 0.3.1 or later) as published
+# at http://copyleft-next.org/.
+
+# This performs a series tests against the proc sysctl interface.
+
+TEST_NAME="sysctl"
+TEST_DRIVER="test_${TEST_NAME}"
+TEST_DIR=$(dirname $0)
+TEST_FILE=$(mktemp)
+
+# This represents
+#
+# TEST_ID:TEST_COUNT:ENABLED
+#
+# TEST_ID: is the test id number
+# TEST_COUNT: number of times we should run the test
+# ENABLED: 1 if enabled, 0 otherwise
+#
+# Once these are enabled please leave them as-is. Write your own test,
+# we have tons of space.
+ALL_TESTS="0001:1:1"
+ALL_TESTS="$ALL_TESTS 0002:1:1"
+
+test_modprobe()
+{
+ if [ ! -d $DIR ]; then
+ echo "$0: $DIR not present" >&2
+ echo "You must have the following enabled in your kernel:" >&2
+ cat $TEST_DIR/config >&2
+ exit 1
+ fi
+}
+
+function allow_user_defaults()
+{
+ if [ -z $DIR ]; then
+ DIR="/sys/module/test_sysctl/"
+ fi
+ if [ -z $DEFAULT_NUM_TESTS ]; then
+ DEFAULT_NUM_TESTS=50
+ fi
+ if [ -z $SYSCTL ]; then
+ SYSCTL="/proc/sys/debug/test_sysctl"
+ fi
+ if [ -z $PROD_SYSCTL ]; then
+ PROD_SYSCTL="/proc/sys"
+ fi
+ if [ -z $WRITES_STRICT ]; then
+ WRITES_STRICT="${PROD_SYSCTL}/kernel/sysctl_writes_strict"
+ fi
+}
+
+function check_production_sysctl_writes_strict()
+{
+ echo -n "Checking production write strict setting ... "
+ if [ ! -e ${WRITES_STRICT} ]; then
+ echo "FAIL, but skip in case of old kernel" >&2
+ else
+ old_strict=$(cat ${WRITES_STRICT})
+ if [ "$old_strict" = "1" ]; then
+ echo "ok"
+ else
+ echo "FAIL, strict value is 0 but force to 1 to continue" >&2
+ echo "1" > ${WRITES_STRICT}
+ fi
+ fi
+}
+
+test_reqs()
+{
+ uid=$(id -u)
+ if [ $uid -ne 0 ]; then
+ echo $msg must be run as root >&2
+ exit 0
+ fi
+
+ if ! which perl 2> /dev/null > /dev/null; then
+ echo "$0: You need perl installed"
+ exit 1
+ fi
+}
+
+function load_req_mod()
+{
+ trap "test_modprobe" EXIT
+
+ if [ ! -d $DIR ]; then
+ modprobe $TEST_DRIVER
+ if [ $? -ne 0 ]; then
+ exit
+ fi
+ fi
+}
+
+set_orig()
+{
+ if [ ! -z $TARGET ]; then
+ echo "${ORIG}" > "${TARGET}"
+ fi
+}
+
+set_test()
+{
+ echo "${TEST_STR}" > "${TARGET}"
+}
+
+verify()
+{
+ local seen
+ seen=$(cat "$1")
+ if [ "${seen}" != "${TEST_STR}" ]; then
+ return 1
+ fi
+ return 0
+}
+
+test_rc()
+{
+ if [[ $rc != 0 ]]; then
+ echo "Failed test, return value: $rc" >&2
+ exit $rc
+ fi
+}
+
+test_finish()
+{
+ set_orig
+ rm -f "${TEST_FILE}"
+
+ if [ ! -z ${old_strict} ]; then
+ echo ${old_strict} > ${WRITES_STRICT}
+ fi
+ exit $rc
+}
+
+run_numerictests()
+{
+ echo "== Testing sysctl behavior against ${TARGET} =="
+
+ rc=0
+
+ echo -n "Writing test file ... "
+ echo "${TEST_STR}" > "${TEST_FILE}"
+ if ! verify "${TEST_FILE}"; then
+ echo "FAIL" >&2
+ exit 1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl is not set to test value ... "
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ exit 1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing sysctl from shell ... "
+ set_test
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ exit 1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Resetting sysctl to original value ... "
+ set_orig
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ exit 1
+ else
+ echo "ok"
+ fi
+
+ # Now that we've validated the sanity of "set_test" and "set_orig",
+ # we can use those functions to set starting states before running
+ # specific behavioral tests.
+
+ echo -n "Writing entire sysctl in single write ... "
+ set_orig
+ dd if="${TEST_FILE}" of="${TARGET}" bs=4096 2>/dev/null
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing middle of sysctl after synchronized seek ... "
+ set_test
+ dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 skip=1 2>/dev/null
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing beyond end of sysctl ... "
+ set_orig
+ dd if="${TEST_FILE}" of="${TARGET}" bs=20 seek=2 2>/dev/null
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing sysctl with multiple long writes ... "
+ set_orig
+ (perl -e 'print "A" x 50;'; echo "${TEST_STR}") | \
+ dd of="${TARGET}" bs=50 2>/dev/null
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ test_rc
+}
+
+run_stringtests()
+{
+ echo -n "Writing entire sysctl in short writes ... "
+ set_orig
+ dd if="${TEST_FILE}" of="${TARGET}" bs=1 2>/dev/null
+ if ! verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Writing middle of sysctl after unsynchronized seek ... "
+ set_test
+ dd if="${TEST_FILE}" of="${TARGET}" bs=1 seek=1 2>/dev/null
+ if verify "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl maxlen is at least $MAXLEN ... "
+ set_orig
+ perl -e 'print "A" x ('"${MAXLEN}"'-2), "B";' | \
+ dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
+ if ! grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl keeps original string on overflow append ... "
+ set_orig
+ perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
+ dd of="${TARGET}" bs=$(( MAXLEN - 1 )) 2>/dev/null
+ if grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl stays NULL terminated on write ... "
+ set_orig
+ perl -e 'print "A" x ('"${MAXLEN}"'-1), "B";' | \
+ dd of="${TARGET}" bs="${MAXLEN}" 2>/dev/null
+ if grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ echo -n "Checking sysctl stays NULL terminated on overwrite ... "
+ set_orig
+ perl -e 'print "A" x ('"${MAXLEN}"'-1), "BB";' | \
+ dd of="${TARGET}" bs=$(( $MAXLEN + 1 )) 2>/dev/null
+ if grep -q B "${TARGET}"; then
+ echo "FAIL" >&2
+ rc=1
+ else
+ echo "ok"
+ fi
+
+ test_rc
+}
+
+sysctl_test_0001()
+{
+ TARGET="${SYSCTL}/int_0001"
+ ORIG=$(cat "${TARGET}")
+ TEST_STR=$(( $ORIG + 1 ))
+
+ run_numerictests
+}
+
+sysctl_test_0002()
+{
+ TARGET="${SYSCTL}/string_0001"
+ ORIG=$(cat "${TARGET}")
+ TEST_STR="Testing sysctl"
+ # Only string sysctls support seeking/appending.
+ MAXLEN=65
+
+ run_numerictests
+ run_stringtests
+}
+
+list_tests()
+{
+ echo "Test ID list:"
+ echo
+ echo "TEST_ID x NUM_TEST"
+ echo "TEST_ID: Test ID"
+ echo "NUM_TESTS: Number of recommended times to run the test"
+ echo
+ echo "0001 x $(get_test_count 0001) - tests proc_dointvec_minmax()"
+ echo "0002 x $(get_test_count 0002) - tests proc_dostring()"
+}
+
+test_reqs
+
+usage()
+{
+ NUM_TESTS=$(grep -o ' ' <<<"$ALL_TESTS" | grep -c .)
+ let NUM_TESTS=$NUM_TESTS+1
+ MAX_TEST=$(printf "%04d\n" $NUM_TESTS)
+ echo "Usage: $0 [ -t <4-number-digit> ] | [ -w <4-number-digit> ] |"
+ echo " [ -s <4-number-digit> ] | [ -c <4-number-digit> <test- count>"
+ echo " [ all ] [ -h | --help ] [ -l ]"
+ echo ""
+ echo "Valid tests: 0001-$MAX_TEST"
+ echo ""
+ echo " all Runs all tests (default)"
+ echo " -t Run test ID the number amount of times is recommended"
+ echo " -w Watch test ID run until it runs into an error"
+ echo " -c Run test ID once"
+ echo " -s Run test ID x test-count number of times"
+ echo " -l List all test ID list"
+ echo " -h|--help Help"
+ echo
+ echo "If an error every occurs execution will immediately terminate."
+ echo "If you are adding a new test try using -w <test-ID> first to"
+ echo "make sure the test passes a series of tests."
+ echo
+ echo Example uses:
+ echo
+ echo "$TEST_NAME.sh -- executes all tests"
+ echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 number of times is recomended"
+ echo "$TEST_NAME.sh -w 0002 -- Watch test ID 0002 run until an error occurs"
+ echo "$TEST_NAME.sh -s 0002 -- Run test ID 0002 once"
+ echo "$TEST_NAME.sh -c 0002 3 -- Run test ID 0002 three times"
+ echo
+ list_tests
+ exit 1
+}
+
+function test_num()
+{
+ re='^[0-9]+$'
+ if ! [[ $1 =~ $re ]]; then
+ usage
+ fi
+}
+
+function get_test_count()
+{
+ test_num $1
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ LAST_TWO=${TEST_DATA#*:*}
+ echo ${LAST_TWO%:*}
+}
+
+function get_test_enabled()
+{
+ test_num $1
+ TEST_DATA=$(echo $ALL_TESTS | awk '{print $'$1'}')
+ echo ${TEST_DATA#*:*:}
+}
+
+function run_all_tests()
+{
+ for i in $ALL_TESTS ; do
+ TEST_ID=${i%:*:*}
+ ENABLED=$(get_test_enabled $TEST_ID)
+ TEST_COUNT=$(get_test_count $TEST_ID)
+ if [[ $ENABLED -eq "1" ]]; then
+ test_case $TEST_ID $TEST_COUNT
+ fi
+ done
+}
+
+function watch_log()
+{
+ if [ $# -ne 3 ]; then
+ clear
+ fi
+ date
+ echo "Running test: $2 - run #$1"
+}
+
+function watch_case()
+{
+ i=0
+ while [ 1 ]; do
+
+ if [ $# -eq 1 ]; then
+ test_num $1
+ watch_log $i ${TEST_NAME}_test_$1
+ ${TEST_NAME}_test_$1
+ else
+ watch_log $i all
+ run_all_tests
+ fi
+ let i=$i+1
+ done
+}
+
+function test_case()
+{
+ NUM_TESTS=$DEFAULT_NUM_TESTS
+ if [ $# -eq 2 ]; then
+ NUM_TESTS=$2
+ fi
+
+ i=0
+ while [ $i -lt $NUM_TESTS ]; do
+ test_num $1
+ watch_log $i ${TEST_NAME}_test_$1 noclear
+ RUN_TEST=${TEST_NAME}_test_$1
+ $RUN_TEST
+ let i=$i+1
+ done
+}
+
+function parse_args()
+{
+ if [ $# -eq 0 ]; then
+ run_all_tests
+ else
+ if [[ "$1" = "all" ]]; then
+ run_all_tests
+ elif [[ "$1" = "-w" ]]; then
+ shift
+ watch_case $@
+ elif [[ "$1" = "-t" ]]; then
+ shift
+ test_num $1
+ test_case $1 $(get_test_count $1)
+ elif [[ "$1" = "-c" ]]; then
+ shift
+ test_num $1
+ test_num $2
+ test_case $1 $2
+ elif [[ "$1" = "-s" ]]; then
+ shift
+ test_case $1 1
+ elif [[ "$1" = "-l" ]]; then
+ list_tests
+ elif [[ "$1" = "-h" || "$1" = "--help" ]]; then
+ usage
+ else
+ usage
+ fi
+ fi
+}
+
+test_reqs
+allow_user_defaults
+check_production_sysctl_writes_strict
+load_req_mod
+
+trap "test_finish" EXIT
+
+parse_args $@
+
+exit 0
git.samba.org / sfrench / cifs-2.6.git / commitdiff